Vertical Lift - Not Just For Terrestrial Flight

NASA Technical Reports Server (NTRS)

Young, Larry A

2000-01-01

Autonomous vertical lift vehicles hold considerable potential for supporting planetary science and exploration missions. This paper discusses several technical aspects of vertical lift planetary aerial vehicles in general, and specifically addresses technical challenges and work to date examining notional vertical lift vehicles for Mars, Titan, and Venus exploration.

High Technology Training at Greenville Technical College.

ERIC Educational Resources Information Center

Barton, Thomas E.; And Others

These three papers focus on various aspects of high technology training at Greenville Technical College (GTC). First, "High Technology and the Community College," by Thomas E. Barton, discusses what high technology should mean to educators and argues that changes in the nature of industrial production require that community colleges not only keep…

Archival Stability of Microfilm--A Technical Review.

ERIC Educational Resources Information Center

Materazzi, Albert R.

The purpose of this report is to acquaint all personnel with some technical aspects of micrographics. The various film types used in the production of microfiche are discussed, including silver halide, diazo, and vesicular films. Other imaging systems used in micrographics are reviewed, and a basic introduction to sensitometry is given. The…

Guidebook for solar process-heat applications

NASA Astrophysics Data System (ADS)

Fazzolare, R.; Mignon, G.; Campoy, L.; Luttmann, F.

1981-01-01

The potential for solar process heat in Arizona and some of the general technical aspects of solar, such as insolation, siting, and process analysis are explored. Major aspects of a solar plant design are presented. Collectors, storage, and heat exchange are discussed. Reducing hardware costs to annual dollar benefits is also discussed. Rate of return, cash flow, and payback are discussed as they relate to solar systems. Design analysis procedures are presented. The design cost optimization techniques using a yearly computer simulation of a solar process operation is demonstrated.

The Doctoral Thesis and Supervision: The Student Perspective

ERIC Educational Resources Information Center

Kiguwa, Peace; Langa, Malose

2009-01-01

The doctoral thesis constitutes both a negotiation of the supervision relationship as well as mastery and skill in participating in a specific community of practice. Two models of supervision are discussed: the technical rationality model with its emphasis on technical aspects of supervision, and the negotiated order model with an emphasis on…

Final Technical Report on the Institute for Advanced Study in Student Personnel Work.

ERIC Educational Resources Information Center

Callis, Robert

This document reports the planning, implementation, and evaluation of a 9-month institute held at the University of Missouri-Columbia to prepare participants (approximately 20) for leadership positions in student personnel work at junior colleges and technical institutes. The following aspects of the instructional program are discussed and…

Nuclear power sources in outer space. [spacecraft propulsion legal aspects

NASA Technical Reports Server (NTRS)

Hosenball, S. N.

1978-01-01

Legal problems associated with nuclear power sources in space are discussed with particular reference to the Cosmos 954 incident. Deliberations of the Legal and Scientific and Technical Subcommittees on the Peaceful Uses of Outer Space on this subject are discussed.

SPECIFIC QUESTION OF RADIATION PROTECTION IN RESEARCH INSTITUTIONS AND TECHNICAL PLANTS (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jaeger, R.G.

1958-01-01

After characteristical dates on the special situation of research laboratories on one side and technical plants on the other side in relation to radiation protection are discussed, some technical questions are dealt with that are especially related to the use of rays by these two groups. In this aspect also such technical work is to be included as is still somewhat marginal for today-s considerations, as for instance the extraction and the dressing of uranium as well as the measures taken in relation to accidents that may occur with the usual routine work with radioactive material. The necessity of startingmore » the building up of an ample organization for protection against radiation is then discussed. (auth)« less

Thermionic fuel element for the S-prime reactor

NASA Astrophysics Data System (ADS)

Van Hagan, Thomas H.; Drees, Elizabeth A.

1993-01-01

Technical aspects of the thermionic fuel element (TFE) design proposed for the S-PRIME space nuclear power system are discussed. Topics covered include the rational for selecting a multicell TFE approach, a technical description of the S-PRIME TFE and its estimated performance, and the technology readiness of the design, which emphasizes techology maturity and low risk.

Technical research aspect of the Pan-Pacific Information Network using satellite

NASA Astrophysics Data System (ADS)

Iida, Takashi; Morikawa, Hisashi; Noguchi, Shoichi

The Pan-Pacific Information Network would provide an important new mechanism for education, research, health service, emergency communication, and cultural exchange. The paper discusses the technical research items related to the Pan-Pacific Information Network, reviews small earth-station systems, and considers the system configuration pointed to the network in the Asia/Pacific region.

Web Based Technical Problem Solving for Enhancing Writing Skills of Secondary Vocational Students

ERIC Educational Resources Information Center

Papantoniou, Eleni; Hadzilacos, Thanasis

2017-01-01

We discuss some aspects of a pilot e-learning technical writing course addressed to 11th grade vocational high school students in Greece. The application of this alternative teaching intervention stemmed from the researcher-instructor's reflections relating to the integration of a problem based e-pedagogy that aims not just to familiarize students…

ATS-6 - Technical aspects of the Health/Education Telecommunications Experiment

NASA Technical Reports Server (NTRS)

Boor, J. L.; Braunstein, J.; Janky, J. M.; Ogden, D.; Potter, J. G.; Harper, E. L.; Volkmer, E.; Whalen, A. A.; Henderson, E.; Hupe, H. H.

1975-01-01

An overview is given of the HET experiment on ATS-6. The paper is divided into nine parts, including a technical overview, a preliminary evaluation of the HET demonstration, a review of operations at the Denver uplink terminal, a discussion of remote ground terminals, a review of C-band comprehensive terminals and of S-band comprehensive terminals, and parts devoted to general network operations, technical management and effectiveness of the network, and the site equipment operator.

Learning Objects--Instructional Metadata and Sequencing.

ERIC Educational Resources Information Center

Redeker, Giselher

The main focus of current discussions within the standardization process of learning technology is on economical opportunities and technical aspects of learning objects. There has been little discussion about the instructional or didactical issues. The purpose of this paper is to conceptualize a taxonomy of learning objects for the facilitation of…

Engineering the System and Technical Integration

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

Approximately 80% of the problems encountered in aerospace systems have been due to a breakdown in technical integration and/or systems engineering. One of the major challenges we face in designing, building, and operating space systems is: how is adequate integration achieved for the systems various functions, parts, and infrastructure? This Contractor Report (CR) deals with part of the problem of how we engineer the total system in order to achieve the best balanced design. We will discuss a key aspect of this question - the principle of Technical Integration and its components, along with management and decision making. The CR will first provide an introduction with a discussion of the Challenges in Space System Design and meeting the challenges. Next is an overview of Engineering the System including Technical Integration. Engineering the System is expanded to include key aspects of the Design Process, Lifecycle Considerations, etc. The basic information and figures used in this CR were presented in a NASA training program for Program and Project Managers Development (PPMD) in classes at Georgia Tech and at Marshall Space Flight Center (MSFC). Many of the principles and illustrations are extracted from the courses we teach for MSFC.

The Mathematical Education of Engineers.

ERIC Educational Resources Information Center

Gnedenko, B. V.; Khalil, Z.

1979-01-01

Several general aspects are discussed. These include the role of mathematics in scientific and technical progress, some deficiencies in training, the role of mathematics in engineering faculties, and methods of improving mathematical training. (MP)

Electron Microscopy.

ERIC Educational Resources Information Center

Beer, Michael

1980-01-01

Reviews technical aspects of structure determination in biological electron microscopy (EM). Discusses low dose EM, low temperature microscopy, electron energy loss spectra, determination of mass or molecular weight, and EM of labeled systems. Cites 34 references. (CS)

Independent assessment of laser power beaming options

NASA Technical Reports Server (NTRS)

Ponikvar, Donald R.

1992-01-01

Technical and architectural issues facing a laser power beaming system are discussed. Issues regarding the laser device, optics, beam control, propagation, and lunar site are examined. Environmental and health physics aspects are considered.

Mechanical Tunneling in Solid Rock

DOT National Transportation Integrated Search

1979-12-01

This report introduces the principles of mchanized tunneling and provides detailed guidelines for practical application. The subject is introduced with a detailed review of technical aspects and terms relating to mchanized tunneling. It discusses the...

The 1999 UNCOPUOS "Technical report on space debris" and the new work plan on space debris (2002 - 2005): perspectives and legal consequences

NASA Astrophysics Data System (ADS)

Benkö, Marietta; Schrogl, Kai-Uwe

2001-10-01

In February 1999, the Scientific and Technical Subcommittee (STSC) of the UN Committee on the Peaceful Uses of Outer Space (UNCOPUOS) adopted a "Technical Report on Space Debris". This was the result of intensive negotiations during a multi-year workplan on space debris, which had been the centerpiece of the technical work of the STSC during these years. The Report is the first document on space debris, presenting the status of space debris research and the problems resulting from space debris. It has the status of an analysis accepted by all governments. Following its adoption, the Report was presented to UNISPACE III and provided the basis for discussions in this Inter-governmental Conference as well as in the Technical Forum, which - at the same time - dealt with the technical as well as the legal aspects of the exploration and use of outer space. The adoption of the Conference Report finalized the workplan in the STSC, but the subject of space debris still remains on the agenda, where until now every year a special aspect is discussed in detail. The Report does not suggest the establishment of an agenda item "space debris" in the UNCOPUOS Legal Subcommittee (LSC). It is very reluctant in even mentioning legal aspects of the space debris issue. The strict and full concentration on technical aspects was a precondition made by a number of Member States for their constructive participation in the elaboration to establish an agenda item on space debris there, were completely detached from that process. Those, who had expected that the adoption of the Report would inevitably lead to formal negotiations in the LSC were deceived so far. Nevertheless, the Report provides a number of starting points for drafting regulation concerning the prevention of space debris as well as debris mitigation measures which also built on work already done by the Inter-Agency Space Debris Coordination Committee (IADC) and its member agencies. This paper describes the status of the disucssion on space debris in UNCOPUOS on the background of the Debris Report, the European position and the new multi-year work plan on space debris in STSC for the years 2002 to 2005, which is based on an initiative by the United States. In addition, it takes the deorbiting of the Russian space station MIR as the starting point for discussing an adequate reaction by the UN General Assembly, which could be prepared in the June 2001 session of UNCOPUOS.

Monitoring Rural Development in East Asia. World Bank Staff Working Paper No. 439.

ERIC Educational Resources Information Center

Deboeck, Guido; Ng, Ronald

The paper presents results of discussions during an 8-day workshop (Kuala Lumpur, Malaysia, December 1979) on monitoring and evaluation (M&E) of East Asian and Pacific rural development projects. Major workshop themes identified are managerial, technical, and institutional aspects of monitoring. The introduction discusses previous World Bank…

The Age of Information; An Interdisciplinary Survey of Cybernetics.

ERIC Educational Resources Information Center

Helvey, T. C.

A series of essays discuss in a semi-technical way the philosophical, theoretical, and applied aspects of cybernetics and bionics. Of particular interest to educators is the author's discussion of the implications of cybernetics for pedagogical methodology. He predicts that education in the future will concentrate on a teaching systems approach,…

Canadian Building Digests 1-100 (With Index).

ERIC Educational Resources Information Center

National Research Council of Canada, Ottawa (Ontario). Div. of Building Research.

One hundred different topics related to the technical aspects of building design and construction are discussed. The major areas of discussion are--(1) the effects of climate on building materials, (2) site and soil analysis, (3) acoustical and thermal design considerations, (4) fire and building design, (5) structural analysis and design, and (6)…

[Surgical treatment of ulcer].

PubMed

Ungeheuer, E; Schröder, D; Lüders, K

1978-04-27

The standard of today in surgical treatment of the duodenal and gastric ulcer in Germany is shown. Positive and negative aspects of the different methods are discussed. Special technics are recommended for the different types of gastroduodenal ulcera.

Lilliputian Suburbia Grows Like a Giant

ERIC Educational Resources Information Center

Open Door, 1969

1969-01-01

As part of the building trades drafting program at Robeson Technical Institute students build models of homes they have designed. Other aspects of the program including preparatory courses, field trips, and planned improvements in the curriculum are discussed. (HH)

A second chance for authors of hijacked journals to publish in legitimate journals.

PubMed

Jalalian, Mehrdad

2015-01-01

This article proposes the republication of articles that have previously been published in counterfeit websites of hijacked journals. The paper also discusses the technical and ethical aspects of republishing such articles.

Advances in optimal routing through computer networks

NASA Technical Reports Server (NTRS)

Paz, I. M.

1977-01-01

The optimal routing problem is defined. Progress in solving the problem during the previous decade is reviewed, with special emphasis on technical developments made during the last few years. The relationships between the routing, the throughput, and the switching technology used are discussed and their future trends are reviewed. Economic aspects are also briefly considered. Modern technical approaches for handling the routing problems and, more generally, the flow control problems are reviewed.

Surgical considerations in FAP-related pouch surgery: Could we do better?

PubMed

Möslein, Gabriela

2016-07-01

The ileoanal pouch has become the standard restorative procedure of choice for patients with the classical phenotype in FAP (familial adenomatous polyposis) and also for ulcerative colitis (UC). Whilst we tend to encounter descriptive analyses comparing functional outcome, fertility and quality of life (QOL) between series in literature, there may be an urgent need to discuss the subtle technical modifications that may be pivotal for improving long-term QOL in FAP patients. Our aim is to review the current literature and discuss the aspects of ileal pouch-anal anastomosis that may require specific reevaluation for FAP. Surgical strategies aimed at minimizing post-interventional desmoid growth is one of the most important aspects. For this study, the following topics of interest were selected: Timing of surgery, IRA or ileoanal pouch for classical FAP, laparoscopic or conventional surgery, TME or mesenteric dissection, preservation of the ileocolic vessels, handsewn or double-staple anastomosis, shape and size of pouch, protective ileostomy, Last and definitely not least: how to manage desmoid plaques or desmoids at the time of prophylactic surgery. For the depicted technicalities of the procedure, a review of recent literature was performed and evaluated. For the topics selected, only sparse reference in literature was identified that was focused on the specific condition situation of FAP. Almost all pouch literature focusses on the procedural aspects, and FAP patients are always a very minor number. Therefore it becomes obvious that the specific entity is not adequately taken into account. This is a serious bias for identification of important steps in the procedure that may be beneficial for patients with either of the diseases. The results of this study demonstrate that several technical differences for construction of ileoanal pouches in FAP patients deserve more attention and prospective evaluation-perhaps even randomized trials. The role, importance and potential benefit or deterioration of outcome in most of the discussed technicalities remains unclear to date. Significant differences between the underlying diseases (UC and FAP) have not been taken into consideration, such as specifically the management of precursor desmoid lesions at the time of prophylactic surgery as well as prevention of desmoid tumors. Several of the aspects discussed in this paper should be prospectively evaluated in larger and exclusive series of FAP patients.

Annual technical report, fiscal year 1979. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Lucas, J. W.

1980-01-01

Accomplishments of the Point-Focusing Distributed Receiver Technology project are presented. The following aspects of the project are discussed: information dissemination, concentrator development, receiver and heat transport network development, power conversion, manufacturing, systems engineering, and tests and evaluations.

Common Market measures to promote the use of solar energy - The demonstration project

NASA Astrophysics Data System (ADS)

Kaut, W.

A series of solar technical projects being conducted under the auspices of the Common Market is discussed. The history and legal foundations of this demonstration project, previous proposal requests and their results, and the experiences to date and present status of the project are assessed. Twenty-six projects proposals are being funded; the only German one concerns solar heating of swimming pools. The economic and administrative aspects of these projects are detailed. Problems of the project are discussed, including the allocation of funds between older and newer aspects and financial constraints.

The United States and World Energy: A Discussion Paper, Department of State.

ERIC Educational Resources Information Center

Smith, Ralph Stuart

This publication is a summary of the world energy situation and its impact on the United States. A brief review of some interrelated diplomatic, commercial, and technical aspects of the energy crisis and their implications for the U.S. and its foreign policy is presented first. Next, discussions of world supplies, uses and problems with different…

Topex: Observing the Oceans from Space

NASA Technical Reports Server (NTRS)

1982-01-01

Measurement of global ocean topography by a radar altimeter aboard the TOPEX satellite is discussed. Technical aspects of satellite altimetry as they pertain to the measurement of ocean circulation are described. The TOPEX mission is explained and a general history of oceanography is included.

Fostering successful scientific software communities

NASA Astrophysics Data System (ADS)

Bangerth, W.; Heister, T.; Hwang, L.; Kellogg, L. H.

2016-12-01

Developing sustainable open source software packages for the sciences appears at first to be primarily a technical challenge: How can one create stable and robust algorithms, appropriate software designs, sufficient documentation, quality assurance strategies such as continuous integration and test suites, or backward compatibility approaches that yield high-quality software usable not only by the authors, but also the broader community of scientists? However, our experience from almost two decades of leading the development of the deal.II software library (http://www.dealii.org, a widely-used finite element package) and the ASPECT code (http://aspect.dealii.org, used to simulate convection in the Earth's mantle) has taught us that technical aspects are not the most difficult ones in scientific open source software. Rather, it is the social challenge of building and maintaining a community of users and developers interested in answering questions on user forums, contributing code, and jointly finding solutions to common technical and non-technical challenges. These problems are posed in an environment where project leaders typically have no resources to reward the majority of contributors, where very few people are specifically paid for the work they do on the project, and with frequent turnover of contributors as project members rotate into and out of jobs. In particular, much software work is done by graduate students who may become fluent enough in a software only a year or two before they leave academia. We will discuss strategies we have found do and do not work in maintaining and growing communities around the scientific software projects we lead. Specifically, we will discuss the management style necessary to keep contributors engaged, ways to give credit where credit is due, and structuring documentation to decrease reliance on forums and thereby allow user communities to grow without straining those who answer questions.

Middle Atmosphere Program. Handbook for MAP. Volume 14: URSI/SCOSTEP Workshop on Technical Aspects of MST Radar

NASA Technical Reports Server (NTRS)

Bowhill, S. A. (Editor); Edwards, B. (Editor)

1984-01-01

Various topics relative to middle atmosphere research were discussed. meteorological and aeronomical requirements for mesosphere-stratosphere-troposphere (MST) radar networks, general circulation of the middle atmosphere, the interpretation of radar returns from clear air, spaced antenna and Doppler techniques for velocity measurement, and techniques for the study of gravity waves and turbulence are among the topics discussed.

Chautauqua notebook: appropriate technology on radio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renz, B.

1981-01-01

Experiences in establishing and maintaining a regional call-in information-exchange radio show (Chautauqua) on energy conservation, appropriate technology, renewable energy sources, and self-reliance are discussed. Information is presented on: appropriate technology; the Chautauquaa concept; topics discussed; research performed; guests; interviewing tips; types of listeners; program features; where to find help; promotion and publicity; the technical and engineering aspects; the budget and funding; and station policies. (MCW)

Technical aspects of dental CBCT: state of the art

PubMed Central

Araki, K; Siewerdsen, J H; Thongvigitmanee, S S

2015-01-01

As CBCT is widely used in dental and maxillofacial imaging, it is important for users as well as referring practitioners to understand the basic concepts of this imaging modality. This review covers the technical aspects of each part of the CBCT imaging chain. First, an overview is given of the hardware of a CBCT device. The principles of cone beam image acquisition and image reconstruction are described. Optimization of imaging protocols in CBCT is briefly discussed. Finally, basic and advanced visualization methods are illustrated. Certain topics in these review are applicable to all types of radiographic imaging (e.g. the principle and properties of an X-ray tube), others are specific for dental CBCT imaging (e.g. advanced visualization techniques). PMID:25263643

Selecting a sterilisation subcontractor.

PubMed

Donawa, M

2001-03-01

Medical device manufacturers who need contract sterilisation services sometimes lack extensive knowledge of the technical aspects of sterilisation processes. For this reason, they may have problems assessing quality requirements for subcontractor sterilisation services. This article discusses important quality issues that should be considered when selecting a sterilisation subcontractor.

Machine Readable Bibliographic Records: Criteria and Creation.

ERIC Educational Resources Information Center

Bregzis, Ritvars

The centrality of bibliographic records in library automation, objectives of the bibliographic record file and elemental factors involved in bibliographic record creation are discussed. The practical work of creating bibliographic records involves: (1) data base environment, (2) technical aspects, (3) cost and (4) operational methodology. The…

Managing the Community College with an Entrepreneurial Spirit.

ERIC Educational Resources Information Center

Kotula, John R.; Decker, Henry J.

Drawing from experiences at Delaware Technical and Community College (DTCC), these papers discuss the institution's entrepreneurial approach to two aspects of college administration: developing relationships with business and industry, and management planning. Entrepreneurship is defined as the ability to find and evaluate opportunities, locate…

Exploration Medical System Technical Architecture Overview

NASA Technical Reports Server (NTRS)

Cerro, J.; Rubin, D.; Mindock, J.; Middour, C.; McGuire, K.; Hanson, A.; Reilly, J.; Burba, T.; Urbina, M.

2018-01-01

The Exploration Medical Capability (ExMC) Element Systems Engineering (SE) goals include defining the technical system needed to support medical capabilities for a Mars exploration mission. A draft medical system architecture was developed based on stakeholder needs, system goals, and system behaviors, as captured in an ExMC concept of operations document and a system model. This talk will discuss a high-level view of the medical system, as part of a larger crew health and performance system, both of which will support crew during Deep Space Transport missions. Other mission components, such as the flight system, ground system, caregiver, and patient, will be discussed as aspects of the context because the medical system will have important interactions with each. Additionally, important interactions with other aspects of the crew health and performance system are anticipated, such as health & wellness, mission task performance support, and environmental protection. This talk will highlight areas in which we are working with other disciplines to understand these interactions.

NASA and Industry Benefits of ACTS High Speed Network Interoperability Experiments

NASA Technical Reports Server (NTRS)

Zernic, M. J.; Beering, D. R.; Brooks, D. E.

2000-01-01

This paper provides synopses of the design. implementation, and results of key high data rate communications experiments utilizing the technologies of NASA's Advanced Communications Technology Satellite (ACTS). Specifically, the network protocol and interoperability performance aspects will be highlighted. The objectives of these key experiments will be discussed in their relevant context to NASA missions, as well as, to the comprehensive communications industry. Discussion of the experiment implementation will highlight the technical aspects of hybrid network connectivity, a variety of high-speed interoperability architectures, a variety of network node platforms, protocol layers, internet-based applications, and new work focused on distinguishing between link errors and congestion. In addition, this paper describes the impact of leveraging government-industry partnerships to achieve technical progress and forge synergistic relationships. These relationships will be the key to success as NASA seeks to combine commercially available technology with its own internal technology developments to realize more robust and cost effective communications for space operations.

Heat strain models applicable for protective clothing: Comparison of core temperature response. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez, R.R.; McLellan, T.M.; Withey, W.R.

This report represents the results of TTCP-UTP6 efforts on modeling aspects when chemical protective ensembles are worn which need to be considered in warm environments. Since 1983, a significant data base has been collected using human experimental studies and wide clothing systems from which predictive modeling equations have been developed with individuals working in temperate and hot environments, but few comparisons of the -- results from various model outputs have ever been carried out. This initial comparison study was part of a key technical area (KIA) project for The Technical Cooperation Program (TTCP) UTP-6 working party. A modeling workshop wasmore » conducted in Toronto, Canada on 9-10 June 1994 to discuss the data reduction and results acquired in an initial clothing analysis study of TTCP using various chemical protective garments. To our knowledge, no comprehensive study to date has ever focused on comparing experimental results using an international standardized heat stress procedure matched to physiological outputs from various model predictions in individuals dressed in chemical protective clothing systems. This is the major focus of this TTCP key technical study. This technical report covers one aspect of the working party`s results.« less

Technical evaluation of the Aerospace Medical Panel Specialists Meeting on Escape Problems and Manoeuvres in Combat Aircraft

NASA Technical Reports Server (NTRS)

Jones, W. L.

1974-01-01

A technical evaluation of the papers presented at a conference on escape systems for helicopters and V/STOL aircraft was made. The subjects discussed include the following: (1) bioengineering aspects of spinal injury during ejection, (2) aerodynamic forces acting on crewman during escape, (3) operational practicality of fly away ejection seats, (4) helicopter survivability requirements, (5) ejection experience from V/STOL aircraft, and (6) research projects involving escape and retrieval systems.

Status and Trend of Automotive Power Packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Zhenxian

2012-01-01

Comprehensive requirements in aspects of cost, reliability, efficiency, form factor, weight, and volume for power electronics modules in modern electric drive vehicles have driven the development of automotive power packaging technology intensively. Innovation in materials, interconnections, and processing techniques is leading to enormous improvements in power modules. In this paper, the technical development of and trends in power module packaging are evaluated by examining technical details with examples of industrial products. The issues and development directions for future automotive power module packaging are also discussed.

Study of Membrane Reflector Technology

NASA Technical Reports Server (NTRS)

Knapp, K.; Hedgepeth, J.

1979-01-01

Very large reflective surfaces are required by future spacecraft for such purposes as solar energy collection, antenna surfaces, thermal control, attitude and orbit control with solar pressure, and solar sailing. The performance benefits in large membrane reflector systems, which may be derived from an advancement of this film and related structures technology, are identified and qualified. The results of the study are reported and summarized. Detailed technical discussions of various aspects of the study are included in several separate technical notes which are referenced.

Zur Rolle von Plansprachen im terminologiewissenschaftlichen Werk von Eugen Wuster (The Role of Planned Languages in Eugen Wuster's Work on Terminology Science).

ERIC Educational Resources Information Center

Blanke, Detlev

1998-01-01

Discusses the relationship between planned languages and specialized technical languages, with particular reference to Esperanto, and analyzes its significance for several aspects of Eugen Wuster's (the founder of terminology science) work. (Author/VWL)

Digital Audio Tape: Yet Another Archival Media?

ERIC Educational Resources Information Center

Vanker, Anthony D.

1989-01-01

Provides an introduction to the technical aspects of digital audiotape and compares it to other computer storage devices such as optical data disks and magnetic tape cartridges in terms of capacity, transfer rate, and cost. The current development of digital audiotape standards is also discussed. (five references) (CLB)

Subjective Appraisal as a Feedback Tool. Technical Report 604.

ERIC Educational Resources Information Center

Burnside, Billy L.

This report examines the accuracy of subjective appraisals of several aspects of task performance, including proficiency, difficulty, frequency, and criticality. An introduction discusses current Army use of subjective appraisal, feedback methods, and problems with subjective appraisal. Data pertaining to the accuracy of various types of appraisal…

[Closed-loop management model of clinical investigational product for new drug of traditional Chinese medicine].

PubMed

Wu, Ping; Zhang, Jian-Wu

2013-09-01

This paper discussed the management regulations and technical requirements of clinical investigational product for new drug of traditional Chinese medicine, analyzed some common problems on the management of them, and proposed the establishment of closed-loop management model and management requirements in various aspects.

Integrating Computing Resources: A Shared Distributed Architecture for Academics and Administrators.

ERIC Educational Resources Information Center

Beltrametti, Monica; English, Will

1994-01-01

Development and implementation of a shared distributed computing architecture at the University of Alberta (Canada) are described. Aspects discussed include design of the architecture, users' views of the electronic environment, technical and managerial challenges, and the campuswide human infrastructures needed to manage such an integrated…

MOBRAL--The Brazilian Adult Literacy Experiment. Educational Studies and Documents No. 15.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

The Brazilian Literacy Movement (MOBRAL-El Movimento Brasileno de Alfabetizacion de Adultos) is discussed in terms of its legal and conceptual bases, organization, participants, technical aspects, and effectiveness. Established by law December 15, 1967 to lower the illiteracy rate in Brazil by improving educational opportunities for the…

Past into Future: Capturing Library Expertise in a Virtual Library.

ERIC Educational Resources Information Center

Daniels, Wayne; Scardellato, Kathy

1999-01-01

Reports on an initiative by the Toronto Public Library to create the "Virtual Reference Library" (VRL). Describes the first service to be offered, a Dewey application called "Science Net." Discusses the VRL and its precursor, objectives, basis for its funding, technical aspects, progress to date and future direction. (AEF)

Proceedings of GLOBAL 2013: International Nuclear Fuel Cycle Conference - Nuclear Energy at a Crossroads

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2013-07-01

The Global conference is a forum for the discussion of the scientific, technical, social and regulatory aspects of the nuclear fuel cycle. Relevant topics include global utilization of nuclear energy, current fuel cycle technologies, advanced reactors, advanced fuel cycles, nuclear nonproliferation and public acceptance.

Summer Program Introduces High School Students to Engineering.

ERIC Educational Resources Information Center

Worthy, Ward

1989-01-01

Discusses how, in two three-week sessions, the Terre Haute (Indiana) college offers selected students a hands-on approach to all aspects of engineering from design and lab work to technical writing. Describes a group project requiring students to study and experiment with simple research problems. Lists 20 project ideas. (MVL)

The Role of Wireless Computing Technology in the Design of Schools.

ERIC Educational Resources Information Center

Nair, Prakash

2003-01-01

After briefly describing the educational advantages of wireless networks using mobile computers, discusses the technical, operational, financial aspects of wireless local area networks (WLAN). Provides examples of school facilities designed for the use of WLAN. Includes a glossary of WLAN-related terms. (Contains 12 references.)

REGULATING THE ULTIMATE SINK: MANAGING THE RISKS OF GEOLOGIC CO2 STORAGE

EPA Science Inventory

The paper addresses the issue of geologic storage (GS) of carbon dioxide (CO2) and discusses the risks and regulatory history of deep underground waste injection on the U.S. mainland and surrounding continental shelf. The treatment focuses on the technical and regulatory aspects ...

NASA Aerospace Flight Battery Program: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements. Volume 1, Part 2

NASA Technical Reports Server (NTRS)

Jung, David S.; Manzo, Michelle A.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 2 - Volume I: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements of the program's operations.

High-risk Trans-Catheter Aortic Valve Replacement in a Failed Freestyle Valve with Low Coronary Height: A Case Report.

PubMed

Karimi, Ashkan; Pourafshar, Negiin; Dibu, George; Beaver, Thomas M; Bavry, Anthony A

2017-06-01

A 55-year-old male with a history of two prior cardiac surgeries presented with decompensated heart failure due to severe bioprosthetic aortic valve insufficiency. A third operation was viewed prohibitively high risk and valve-in-valve trans-catheter aortic valve replacement was considered. There were however several high-risk features and technically challenging aspects including low coronary ostia height, poor visualization of the aortic sinuses, and difficulty in identification of the coplanar view due to severe aortic insufficiency, and a highly mobile aortic valve mass. After meticulous peri-procedural planning, trans-catheter aortic valve replacement was carried out with a SAPIEN 3 balloon-expandable valve without any complication. Strategies undertaken to navigate the technically challenging aspects of the case are discussed.

Social media and nursing practice: changing the balance between the social and technical aspects of work.

PubMed

Casella, Evan; Mills, Jane; Usher, Kim

2014-01-01

Modern communication methods are drastically changing the way people interact with each other. Professions such as nursing need to evolve to remain relevant as social infrastructure changes. In the 1960s, researchers developed a sociotechnical theory that stated workers were more motivated and productive if there was a good balance between the social and technical aspects of their work. Today's technology is blurring the boundaries between the social and the technical thereby transforming human contact and communication into a multi-method process. In Australia, people are adept at utilising social media technology to become more efficient, creative and connected; Australian nurses also need to embrace changing technology to capitalise on the professional opportunities offered by social media. This paper imagines a world where nurses integrate social media into assessing, diagnosing, planning, implementing and evaluating care. Discussion draws on a combination of real-world examples of best-practice and blue-sky thinking to demonstrate that evidence-based care must be combined with the adoption of future-forward technology.

Academia Meets Industry.

PubMed

Schäfer, Christian; Paprotka, Tobias; Heitzer, Ellen; Eccleston, Mark; Noe, Johannes; Holdenrieder, Stefan; Diehl, Frank; Thierry, Alain

2016-01-01

Researchers working in industrial laboratories as well as in academic laboratories discussed topics related to the use of extracellular nucleic acids in different fields. These included areas like non-invasive prenatal diagnosis, the application of different methods for the analysis and characterization of patients with benign and malignant diseases and technical aspects associated with extracellular nucleic acids. In addition, the possibilities and chances for a cooperation of researchers working in different worlds, i.e. academia and industry, were discussed.

Design summary of a geostationary facility utilized as a communications platform

NASA Technical Reports Server (NTRS)

Barberis, N. J.; Brown, J. V.

1986-01-01

This paper describes the technical aspects of a geostationary platform facility that makes maximum use of the planned NASA space station and its elements, mainly the orbital maneuvering vehicle (OMV) and the orbital transfer vehicles (OTV). The platform design concept is described, with emphasis on the key technologies utilized to configure the platform. Key systems aspects include a design summary with discussion of the controls, telemetry, command and ranging, power, propulsion, control electronics, thermal control subsystems, and space station interfaces. The use of the facility as a communications platform is developed to demonstrate the attractiveness of the concept. The economic benefits are discussed, as well as the concept of servicing for payload upgrade.

Space Station 20-kHz power management and distribution system

NASA Technical Reports Server (NTRS)

Hansen, Irving G.; Sundberg, Gale R.

1986-01-01

During the conceptual design phase a 20-kHz power distribution system was selected as the reference for the Space Station. The system is single-phase 400 VRMS, with a sinusoidal wave form. The initial user power level will be 75 kW with growth to 300 kW. The high-frequency system selection was based upon considerations of efficiency, weight, safety, ease of control, interface with computers, and ease of paralleling for growth. Each of these aspects will be discussed as well as the associated trade-offs involved. An advanced development program has been instituted to accelerate the maturation of the high-frequency system. Some technical aspects of the advanced development will be discussed.

Space station 20-kHz power management and distribution system

NASA Technical Reports Server (NTRS)

Hansen, I. G.; Sundberg, G. R.

1986-01-01

During the conceptual design phase a 20-kHz power distribution system was selected as the reference for the space station. The system is single-phase 400 VRMS, with a sinusoidal wave form. The initial user power level will be 75 kW with growth to 300 kW. The high-frequency system selection was based upon considerations of efficiency, weight, safety, ease of control, interface with computers, and ease of paralleling for growth. Each of these aspects will be discussed as well as the associated trade-offs involved. An advanced development program has been instituted to accelerate the maturation of the high-frequency system. Some technical aspects of the advanced development will be discussed.

High Efficiency Space Power Systems Project Advanced Space-Rated Batteries

NASA Technical Reports Server (NTRS)

Reid, Concha M.

2011-01-01

Case Western Reserve University (CWRU) has an agreement with China National Offshore Oil Corporation New Energy Investment Company, Ltd. (CNOOC), under the United States-China EcoPartnerships Framework, to create a bi-national entity seeking to develop technically feasible and economically viable solutions to energy and environmental issues. Advanced batteries have been identified as one of the initial areas targeted for collaborations. CWRU invited NASA Glenn Research Center (GRC) personnel from the Electrochemistry Branch to CWRU to discuss various aspects of advanced battery development as they might apply to this partnership. Topics discussed included: the process for the selection of a battery chemistry; the establishment of an integrated development program; project management/technical interactions; new technology developments; and synergies between batteries for automotive and space operations. Additional collaborations between CWRU and NASA GRC's Electrochemistry Branch were also discussed.

Role of home automation in distribution automation and automated meter reading. Tropical report, December 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, K.W.

1994-12-01

This is one of a series of topical reports dealing with the strategic, technical, and market development of home automation. Particular emphasis is placed upon identifying those aspects of home automation that will impact the gas industry and gas products. Communication standards, market drivers, key organizations, technical implementation, product opportunities, and market growth projects will all be addressed in this or subsequent reports. These reports will also discuss how the gas industry and gas-fired equipment can use home automation technology to benefit the consumer.

Psychology and Language.

ERIC Educational Resources Information Center

Fodor, Jerry

The greater part of this paper is dedicated to a non-technical discussion and criticism of the principles of Skinnerian behaviorism. Various aspects of the theory are examined, and its inability to deal with verbal behavior as a productive and creative activity is asserted. The author's point of view is that expressed by Noam Chomsky in his…

Testing the Waters: Can You Involve Community Action in Your College Curriculum?

ERIC Educational Resources Information Center

Knapp, Elizabeth P.; Harbor, David J.; Ginwalla, Zenobia F.

2003-01-01

Discusses the Maury River Alliance (MRA), a cooperative program developed at the Washington and Lee University that involved local colleges, high schools, government agencies, and conservation groups. Addresses the connection between land use and water quality with a creative merging of technical, social, and educational aspects of local watershed…

The Revolution in Print Technology. Text & Readers Programme, Technical Report #1.

ERIC Educational Resources Information Center

Macdonald-Ross, Michael

The two papers presented in this document discuss aspects of the computer revolution and its effects on the production of print materials. The papers are addressed to readers who are educators rather than technologists. The first article, entitled "Print," interprets that term broadly to include text development and production, and…

How to Determine the Quality of Students' Reflections?

ERIC Educational Resources Information Center

Leijen, Ali; Valtna, Kai; Leijen, Djuddah A. J.; Pedaste, Margus

2012-01-01

This article discusses some of the ambiguities related to the concept of reflection in education, and presents an alternative approach for determining the focus and quality of students' reflection. Accordingly, the focus of reflection can vary from a concrete technical aspect of an experience to the broader societal context of that experience, and…

US Navy program in small cryocoolers

NASA Technical Reports Server (NTRS)

Nisenoff, M.; Edelsack, E. A.

1983-01-01

A Navy program to develop fractional-watt cryocoolers capable of operating below 10 K is discussed. Several varieties of Stirling coolers were built and are under evaluation. In addition, helium gas compressors designed for use with small, closed cycle Joule-Thomson coolers are under development. An overview of the technical aspects of the program are presented.

Children and Toys: A Bibliography. Uppsala Reports on Education 27.

ERIC Educational Resources Information Center

Almqvist, Birgitta

This bibliography of literature on children and toys covers the period of 1962-1987. About 600 titles, which were collected mainly by literature searches of 10 databases, are covered. The bibliography is divided into three parts. Part I provides an introduction, which includes discussions of technical, quantitative, and qualitative aspects. Part…

The IBM PC as an Online Search Machine. Part 6: Uploading.

ERIC Educational Resources Information Center

Kolner, Stuart J.

1986-01-01

This discussion of uploading (the transmission of information from local memory to a remote system) covers benefits, disadvantages, host system features, technical aspects, and four examples of uploading using CROSSTALK. Examples include function keys, searcher assistance with commonly-used terms, the use of hedges and boiler-plate searching, and…

Study on Mass Conservation Techniques for Treatment of Library and Archives Material.

ERIC Educational Resources Information Center

Wachter, Wolfgang, Ed.

This document outlines the present state of development in mass restoration of library and archive materials and relates it to the economic, technical, and aesthetic aspects of various conservation and restoration methods, and discusses their implications for the formation of preservation policies in libraries. Ill effects to library materials…

Logical Aspects of Question-Answering by Computer.

ERIC Educational Resources Information Center

Kuhns, J. L.

The problem of computerized question-answering is discussed in this paper from the point of view of certain technical, although elementary, notions of logic. Although the work reported herein has general application to the design of information systems, it is specifically motivated by the RAND Relational Data File. This system, for which a…

Track and Field: An Administrative Approach to the Science of Coaching.

ERIC Educational Resources Information Center

Steben, Ralph E.; Bell, Sam

This textbook on track and field organization and administration is directed toward the college physical education student and the track coach interested in technical, in-depth material. Each event is discussed under appropriate areas of physical categorization, with analysis of basic, biomechanical aspects of the activity. Line drawings and…

An alternative method for neonatal cerebro-myocardial perfusion.

PubMed

Luciani, Giovanni Battista; De Rita, Fabrizio; Faggian, Giuseppe; Mazzucco, Alessandro

2012-05-01

Several techniques have already been described for selective cerebral perfusion during repair of aortic arch pathology in children. One method combining cerebral with myocardial perfusion has also been proposed. A novel technique is reported here for selective and independent cerebro-myocardial perfusion for neonatal and infant arch surgery. Technical aspects and potential advantages are discussed.

Overview and technical and practical aspects for use of geostatistics in hazardous-, toxic-, and radioactive-waste-site investigations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bossong, C.R.; Karlinger, M.R.; Troutman, B.M.

1999-10-01

Technical and practical aspects of applying geostatistics are developed for individuals involved in investigation at hazardous-, toxic-, and radioactive-waste sites. Important geostatistical concepts, such as variograms and ordinary, universal, and indicator kriging, are described in general terms for introductory purposes and in more detail for practical applications. Variogram modeling using measured ground-water elevation data is described in detail to illustrate principles of stationarity, anisotropy, transformations, and cross validation. Several examples of kriging applications are described using ground-water-level elevations, bedrock elevations, and ground-water-quality data. A review of contemporary literature and selected public domain software associated with geostatistics also is provided, asmore » is a discussion of alternative methods for spatial modeling, including inverse distance weighting, triangulation, splines, trend-surface analysis, and simulation.« less

Planetary Data Workshop, Part 2

NASA Technical Reports Server (NTRS)

1984-01-01

Technical aspects of the Planetary Data System (PDS) are addressed. Methods and tools for maintaining and accessing large, complex sets of data are discussed. The specific software and applications needed for processing imaging and non-imaging science data are reviewed. The need for specific software that provides users with information on the location and geometry of scientific observations is discussed. Computer networks and user interface to the PDS are covered along with Computer hardware available to this data system.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Knowledge-based model building of proteins: concepts and examples.

PubMed Central

Bajorath, J.; Stenkamp, R.; Aruffo, A.

1993-01-01

We describe how to build protein models from structural templates. Methods to identify structural similarities between proteins in cases of significant, moderate to low, or virtually absent sequence similarity are discussed. The detection and evaluation of structural relationships is emphasized as a central aspect of protein modeling, distinct from the more technical aspects of model building. Computational techniques to generate and complement comparative protein models are also reviewed. Two examples, P-selectin and gp39, are presented to illustrate the derivation of protein model structures and their use in experimental studies. PMID:7505680

Passive and active mechanical properties of biotemplated ceramics revisited.

PubMed

Van Opdenbosch, Daniel; Fritz-Popovski, Gerhard; Plank, Johann; Zollfrank, Cordt; Paris, Oskar

2016-10-13

Living nature and human technology apply different principles to create hard, strong and tough materials. In this review, we compare and discuss prominent aspects of these alternative strategies, and demonstrate for selected examples that nanoscale-precision biotemplating is able to produce uncommon mechanical properties as well as actuating behavior, resembling to some extent the properties of the original natural templates. We present and discuss mechanical testing data showing for the first time that nanometer-precision biotemplating can lead to porous ceramic materials with deformation characteristics commonly associated with either biological or highly advanced technical materials. We also review recent findings on the relation between hierarchical structuring and humidity-induced directional motion. Finally, we discuss to which extent the observed behavior is in agreement with previous results and theories on the mechanical properties of multiscale hierarchical materials, as well as studies of highly disperse technical materials, together with an outlook for further lines of investigation.

Target Seedling Symposium: Proceedings, combined meeting of the Western Forest Nursery Associations

Treesearch

Robin Rose; Sally J. Campbell; Thomas D. Landis

1990-01-01

This publication, a compilation of 28 technical articles on various aspects of forest nursery management in western North America, consists of two sections. The first 10 papers comprise the Target Seedling Symposium, and discuss the latest methods of describing and measuring the ideal seedling for reforestation purposes. Morphological characteristics such as height,...

Report on the Desirability of Adopting an International Instrument for the Protection of Translators.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This report contains the formal documents leading to the inclusion on the provisional agenda of UNESCO's 1972 General Conference of a discussion considering the desirability of adopting an instrument for the protection of translators. Included in the document is the "Preliminary Study of the Technical and Legal Aspects of Copyright Protection for…

Star field attitude sensor study for the Pioneer Venus spacecraft

NASA Technical Reports Server (NTRS)

Rudolf, W. P.; Reed, D. R.

1972-01-01

The characteristics of a star field attitude sensor for use with the Pioneer Venus spacecraft are presented. The aspects of technical feasibility, system interface considerations, and cost of flight hardware development are discussed. The tradeoffs which relate to performance, design, cost, and reliability are analyzed. The configuration of the system for installation in the spacecraft is described.

The Technique of Film Animation. Revised Edition.

ERIC Educational Resources Information Center

Halas, John; Manvell, Roger

This book, which is a technical, sophisticated manual for professionals, covers all aspects of the animation process; it does not use a simple step-by-step, do-it-at-home approach. It begins by discussing the history of animation and the physical laws and aesthetic principles which govern the art. A section on the uses of animation (e.g., for…

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2005-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education (CTE) over the past 10 years. Data were collected across 10 CTE program areas from a nationally representative sample of community colleges. The authors discuss the extent to…

Some remarks on the current status of the control theory of single space dimension hyperbolic systems

NASA Technical Reports Server (NTRS)

Russell, D. L.

1983-01-01

Various aspects of the control theory of hyperbolic systems, including controllability, stabilization, control canonical form theory, etc., are reviewed. To allow a unified and not excessively technical treatment, attention is restricted to the case of a single space variable. A newly developed procedure of canonical augmentation is discussed.

Tools for Tomorrow: Women in the Trades. Trainer's Guide.

ERIC Educational Resources Information Center

Madison Area Technical Coll., WI.

This guide is intended for use by trainers presenting the Tools for Tomorrow program, a technical college program to train women for employment in 13 skilled trades. Discussed in the first two sections are these topics: the program's purposes, barriers encountered by women seeking to enter trades, and various aspects of implementing the Tools for…

Making Communication Matter: Integrating Instruction, Projects and Assignments to Teach Writing and Design

ERIC Educational Resources Information Center

Riddell, William T.; Courtney, Jennifer; Constans, Eric; Dahm, Kevin; Harvey, Roberta; von Lockette, Paris

2010-01-01

An integrated technical writing and design course has been developed at Rowan University. This course was developed using aspects of project-based learning and recent discussions about design education, as well as pedagogical approaches from the write-to-learn and the writing in the disciplines (WID) movements. The result is a course where the…

Reliability Sampling Plans: A Review and Some New Results

ERIC Educational Resources Information Center

Isaic-Maniu, Alexandru; Voda, Viorel Gh.

2009-01-01

In this work we present a large area of aspects related to the problem of sampling inspection in the case of reliability. First we discuss the actual status of this domain, mentioning the newest approaches (from a technical view point) such as HALT and HASS and the statistical perspective. After a brief description of the general procedure in…

Feasibility Study on Fully Automatic High Quality Translation: Volume I. Final Technical Report.

ERIC Educational Resources Information Center

Lehmann, Winifred P.; Stachowitz, Rolf

The object of this theoretical inquiry is to examine the controversial issue of a fully automatic high quality translation (FAHQT) in the light of past and projected advances in linguistic theory and hardware/software capability. This first volume of a two-volume report discusses the requirements of translation and aspects of human and machine…

Common Elements of Risk

DTIC Science & Technology

2006-04-01

8 Figure 5 : Threat and Operational Risk .................................................................... 9 Figure 6: Work Process...technical note might be applied to selected risk management topics. Finally, Section 5 , “Conclusion,” completes the report by summarizing the history...addressed in Section 5 . CMU/SEI-2006-TN-014 5 So far, our discussion has focused on the conceptual aspects of risk . The next section explores risk’s

An alternative method for neonatal cerebro-myocardial perfusion

PubMed Central

Luciani, Giovanni Battista; De Rita, Fabrizio; Faggian, Giuseppe; Mazzucco, Alessandro

2012-01-01

Several techniques have already been described for selective cerebral perfusion during repair of aortic arch pathology in children. One method combining cerebral with myocardial perfusion has also been proposed. A novel technique is reported here for selective and independent cerebro-myocardial perfusion for neonatal and infant arch surgery. Technical aspects and potential advantages are discussed. PMID:22307393

Cotinine analytical workshop report: consideration of analytical methods for determining cotinine in human body fluids as a measure of passive exposure to tobacco smoke.

PubMed Central

Watts, R R; Langone, J J; Knight, G J; Lewtas, J

1990-01-01

A two-day technical workshop was convened November 10-11, 1986, to discuss analytical approaches for determining trace amounts of cotinine in human body fluids resulting from passive exposure to environmental tobacco smoke (ETS). The workshop, jointly sponsored by the U.S. Environmental Protection Agency and Centers for Disease Control, was attended by scientists with expertise in cotinine analytical methodology and/or conduct of human monitoring studies related to ETS. The workshop format included technical presentations, separate panel discussions on chromatography and immunoassay analytical approaches, and group discussions related to the quality assurance/quality control aspects of future monitoring programs. This report presents a consensus of opinion on general issues before the workshop panel participants and also a detailed comparison of several analytical approaches being used by the various represented laboratories. The salient features of the chromatography and immunoassay analytical methods are discussed separately. PMID:2190812

The application of DNA microarrays in gene expression analysis.

PubMed

van Hal, N L; Vorst, O; van Houwelingen, A M; Kok, E J; Peijnenburg, A; Aharoni, A; van Tunen, A J; Keijer, J

2000-03-31

DNA microarray technology is a new and powerful technology that will substantially increase the speed of molecular biological research. This paper gives a survey of DNA microarray technology and its use in gene expression studies. The technical aspects and their potential improvements are discussed. These comprise array manufacturing and design, array hybridisation, scanning, and data handling. Furthermore, it is discussed how DNA microarrays can be applied in the working fields of: safety, functionality and health of food and gene discovery and pathway engineering in plants.

[Contemporary history of medicine: issues and approaches].

PubMed

Schlich, Thomas

2007-01-01

This paper illuminates specific aspects of writing contemporary history of medicine. The first section deals with specific methodological problems in the historiography of modem medicine. Topics discussed include the specific situation concerning contemporary source material, oral history, the use of theories in historiography, the problem of temporal proximity and the issue of the necessity of medical technical knowledge on part of the historian. In the second section the paper ends with a discussion of the purpose and objectives of contemporary history of medicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The feasibility of constructing a 25-50 MWe geothermal power plant using low salinity hydrothermal fluid as the energy source was assessed. Here, the geotechnical aspects of geothermal power generation and their relationship to environmental impacts in the Imperial Valley of California were investigated. Geology, geophysics, hydrogeology, seismicity and subsidence are discussed in terms of the availability of data, state-of-the-art analytical techniques, historical and technical background and interpretation of current data. Estimates of the impact of these geotechnical factors on the environment in the Imperial Valley, if geothermal development proceeds, are discussed.

Technical Feasibility Aspects of the Geothermal Resource Reporting Methodology (GRRM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badgett, Alex; Young, Katherine R; Dobson, Patrick F.

This paper reviews the technical assessment of the Geothermal Research Reporting Methodology (GRRM, http://en.openei.org/wiki/GRRM) being developed for reporting geothermal resources and project progress. The goal of the methodology is to provide the U.S. Department of Energy's Geothermal Technologies Office (GTO) with a consistent and comprehensible means of evaluating the impacts of its funding programs. The GRRM is designed to provide uniform assessment criteria for geothermal resource grades and developmental phases of geothermal resource exploration and development. This resource grade system provides information on twelve attributes of geothermal resource locations (e.g., temperature, permeability, land access) to indicate potential for geothermal development.more » The GTO plans to use these Protocols to help quantitatively identify the greatest barriers to geothermal development, develop measureable program goals that will have the greatest impact to geothermal deployment, objectively evaluate proposals based (in part) on a project's ability to contribute to program goals, monitor project progress, and report on GTO portfolio performance. The GRRM assesses three areas of geothermal potential: geological, socio-economic, and technical. Previous work and publications have discussed the work done on the geological aspects of this methodology (Young et al. 2015c); this paper details the development of the technical assessment of the GRRM. Technical development attributes considered include: reservoir management, drilling, logistics, and power conversion.« less

The 30/20 GHz communications system functional requirements

NASA Technical Reports Server (NTRS)

Siperko, C. M.; Frankfort, M.; Markham, R.; Wall, M.

1981-01-01

The characteristics of 30/20 GHz usage in satellite systems to be used in support of projected communication requirements of the 1990's are defined. A requirements analysis which develops projected market demand for satellite services by general and specialized carriers and an analysis of the impact of propagation and system constraints on 30/20 GHz operation are included. A set of technical performance characteristics for the 30/20 GHz systems which can serve the resulting market demand and the experimental program necessary to verify technical and operational aspects of the proposed systems is also discussed.

Technical analysis of US Army Weapons Systems and related advanced technologies of military interest. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1991-06-14

This report summarizes the activities and accomplishments of an US Army technology security project designed to identify and develop effective policy guidelines for militarily critical technologies in specific Army systems and in broad generic technology areas of military interest, Individual systems analyses are documented in separate Weapons Systems Technical Assessments (WSTAs) and the general generic technology areas are evaluated in the Advanced Technology Assessment Reports (ATARs), However, specific details of these assessments are not addressed here, only recommendations regarding aspects of the defined approach, methodology, and format are provided and discussed.

History, Molecular Mechanisms, and Endoscopic Treatment of Barrett’s Esophagus

PubMed Central

Spechler, Stuart Jon; Fitzgerald, Rebecca C.; Prasad, Ganapathy A.; Wang, Kenneth K.

2010-01-01

This report is written as an adjunct to the American Gastroenterological Association Institute’s medical position statement and technical review on the management of Barrett’s esophagus, which will be published in the near future. Those documents will consider a number of broad questions on the diagnosis, clinical features, and management of patients with Barrett’s esophagus, and the reader is referred to the technical review for an in-depth discussion of those topics. In this report, we review historical, molecular, and endoscopic therapeutic aspects of Barrett’s esophagus that are of interest to clinicians and researchers. PMID:20080098

Three Years of Global Positioning System Experience on International Space Station

NASA Technical Reports Server (NTRS)

Gomez, Susan

2005-01-01

The International Space Station global positioning systems (GPS) receiver was activated in April 2002. Since that time, numerous software anomalies surfaced that had to be worked around. Some of the software problems required waivers, such as the time function, while others required extensive operator intervention, such as numerous power cycles. Eventually, enough anomalies surfaced that the three pieces of code included in the GPS unit have been re-written and the GPS units were upgraded. The technical aspects of the problems are discussed, as well as the underlying causes that led to the delivery of a product that has had numerous problems. The technical aspects of the problems included physical phenomena that were not well understood, such as the affect that the ionosphere would have on the GPS measurements. The underlying causes were traced to inappropriate use of legacy software, changing requirements, inadequate software processes, unrealistic schedules, incorrect contract type, and unclear ownership responsibilities.

Three Years of Global Positioning System Experience on International Space Station

NASA Technical Reports Server (NTRS)

Gomez, Susan

2006-01-01

The International Space Station global positioning system (GPS) receiver was activated in April 2002. Since that time, numerous software anomalies surfaced that had to be worked around. Some of the software problems required waivers, such as the time function, while others required extensive operator intervention, such as numerous power cycles. Eventually enough anomalies surfaced that the three pieces of code included in the GPS unit have been re-written and the GPS units upgraded. The technical aspects of the problems are discussed, as well as the underlying causes that led to the delivery of a product that has had so many problems. The technical aspects of the problems included physical phenomena that were not well understood, such as the affect that the ionosphere would have on the GPS measurements. The underlying causes were traced to inappropriate use of legacy software, changing requirements, inadequate software processes, unrealistic schedules, incorrect contract type, and unclear ownership responsibilities..

Sustaining Open Source Communities through Hackathons - An Example from the ASPECT Community

NASA Astrophysics Data System (ADS)

Heister, T.; Hwang, L.; Bangerth, W.; Kellogg, L. H.

2016-12-01

The ecosystem surrounding a successful scientific open source software package combines both social and technical aspects. Much thought has been given to the technology side of writing sustainable software for large infrastructure projects and software libraries, but less about building the human capacity to perpetuate scientific software used in computational modeling. One effective format for building capacity is regular multi-day hackathons. Scientific hackathons bring together a group of science domain users and scientific software contributors to make progress on a specific software package. Innovation comes through the chance to work with established and new collaborations. Especially in the domain sciences with small communities, hackathons give geographically distributed scientists an opportunity to connect face-to-face. They foster lively discussions amongst scientists with different expertise, promote new collaborations, and increase transparency in both the technical and scientific aspects of code development. ASPECT is an open source, parallel, extensible finite element code to simulate thermal convection, that began development in 2011 under the Computational Infrastructure for Geodynamics. ASPECT hackathons for the past 3 years have grown the number of authors to >50, training new code maintainers in the process. Hackathons begin with leaders establishing project-specific conventions for development, demonstrating the workflow for code contributions, and reviewing relevant technical skills. Each hackathon expands the developer community. Over 20 scientists add >6,000 lines of code during the >1 week event. Participants grow comfortable contributing to the repository and over half continue to contribute afterwards. A high return rate of participants ensures continuity and stability of the group as well as mentoring for novice members. We hope to build other software communities on this model, but anticipate each to bring their own unique challenges.

A review of clinical and technical considerations for fixed and removable implant prostheses in the edentulous mandible.

PubMed

Zitzmann, Nicola Ursula; Marinello, Carlo Paolo

2002-01-01

The aim of the present article is to review some of the technical treatment options for implant prostheses restoring the edentulous mandible, mainly based on the Brånemark system. Clinical and technical aspects are discussed for the three established concepts: (1) implant-supported fixed prosthesis, (2) removable implant-supported overdenture, and (3) combined implant-retained and soft tissue-supported overdenture prosthesis. The framework of an implant-supported fixed screw-retained prosthesis can be processed in gold, Co-Cr alloy, or titanium with casting, laser-welding, or milling techniques. To improve the stability and retention of a conventional complete denture, one to four implants are indicated, and unsplinted (single attachments) or splinted designs (bar systems) can be applied. The design of the overdenture prosthesis must be carefully planned according to the requirements to ensure adequate stability and optimal form, contour, and esthetics, and the patient's best comfort. A large variety of different treatment modalities exist for both the fixed and removable mandibular implant prosthesis. Clinical and technical aspects should be considered at the beginning of the treatment to: (1) select the optimal implant position, (2) establish an adequate number of functional units, (3) select the appropriate retainers, and (4) apply the best technique for framework processing and veneering.

A Balanced Marine Aquarium [and] The Biology of Marine Aquarium Fishes Collected in Monroe County, Florida. A Two-Paper NOAA Technical Memorandum.

ERIC Educational Resources Information Center

Palko, Barbara Jayne; And Others

This document consists of two separate papers. The first paper, "A Balanced Marine Aquarium" (Barbara Jayne Palko), discusses various aspects of a balanced marine aquarium. Information provided includes the basic and optional equipment needed to construct a balanced aquarium, preparations for setting up the aquarium, preparing the…

Quetzal or not Quetzal, that is the question... . On the stairs of the Castillo monument in Chichen Itza

NASA Astrophysics Data System (ADS)

Elizondo-Garza, Fernando J.

2002-11-01

Some speculation will be presented about the hypothesis that states that the reflected sounds in the stairs of the Castillo building in Chichen Itza, Mexico, imitates the song of the quetzal bird. Some aspects of construction, both technical and social, are discussed as well as issues related with myth and fantasies.

Design and control considerations for industrial and space manipulators

NASA Technical Reports Server (NTRS)

Whitney, D. E.; Book, W. J.; Lynch, P. M.

1974-01-01

This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

Program control for mission success

NASA Technical Reports Server (NTRS)

Longanecker, G. W.

1994-01-01

This article suggests that in order to be able to exercise control over a particular program, the program itself must be controllable. A controllable program therefore, according to the author, is one that has been properly scoped technically, realistically scheduled, and adequately budgeted. The article delves indepth into each of the above aspects of a controllable program and discusses both the pros and cons of each.

Progeny testing: proceedings of servicewide genetics workshop

Treesearch

Dick Miller

1984-01-01

The primary objective of this workshop was to discuss in detail the state- of-the-art of progeny testing. All aspects, from setting objectives through data collection and analysis, was be covered. We all know progeny testing is a highly technical phase of our tree improvement programs. Each task is critical and must be performed accurately and within a prescribed time...

Antibody-drug conjugates: Intellectual property considerations

PubMed Central

Storz, Ulrich

2015-01-01

Antibody-drug conjugates are highly complex entities that combine an antibody, a linker and a toxin. This complexity makes them demanding both technically and from a regulatory point of view, and difficult to deal with in their patent aspects. This article discusses different issues of patent protection and freedom to operate with regard to this promising new class of drugs. PMID:26292154

The Language Used to Articulate Content as an Aspect of Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Chick, Helen

2015-01-01

Mathematical knowledge in classrooms is mediated through the use of both technical and informal language. This paper is a report of a study of the language use of teachers as they examine students' work and discuss teaching for the topic of fraction operations. This provides a window on their pedagogical content knowledge and also on the way in…

Some technical aspects of trimming lumber in the planing mill

Treesearch

Peter Koch

1952-01-01

This paper discusses four classes of lumber timming machines applicable to the planning mill. The classification is made according to function as follows: Irregularity or defect removal to increase the value of residual portion. Double end trimming to a length standard acceptable by the trade, trimming to specified length of the higher grades of stock after it has been...

MSFC Skylab Orbital Workshop, volume 1. [systems analysis and equipment specifications for orbital laboratory

NASA Technical Reports Server (NTRS)

1974-01-01

The technical aspects of the Skylab-Orbital Workshop are discussed. Original concepts, goals, design philosophy, hardware, and testing are reported. The final flight configuration, overall test program, and mission performance are analyzed. The systems which are examined are: (1) the structural system, (2) the meteoroid shield systems, and (3) the environmental/thermal control subsystem.

Geothermal Program Review VI: proceedings. Beyond goals and objectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-01-01

Program Review VI was comprised of six sessions, including an opening session, four technical sessions that addressed each of the major DOE research areas, and a session on special issues. The technical sessions were on Hydrothermal, Hot Dry Rock, Geopressured and Magma resources. Presenters in the technical sessions discussed their R and D activities within the context of specific GTD Programmatic Objectives for that technology, their progress toward achieving those objectives, and the value of those achievements to industry. The ''Special Issues'' presentations addressed several topics such as the interactions between government and industry on geothermal energy R and D;more » the origin and basis for the programmatic objectives analytical computer model; and international marketing opportunities for US geothermal equipment and services. The unique aspect of Program Review VI was that it was held in conjunction with the National Geothermal Association's Industry Round Table on Federal R and D. The Round Table provided a forum for open and lively discussions between industry and government researchers and gave industry an opportunity to convey their needs and perspectives on DOE's research programs. These discussions also provided valuable information to DOE regarding industry's priorities and directions.« less

Endoscopic management of acute peptic ulcer bleeding.

PubMed

Lu, Yidan; Chen, Yen-I; Barkun, Alan

2014-12-01

This review discusses the indications, technical aspects, and comparative effectiveness of the endoscopic treatment of upper gastrointestinal bleeding caused by peptic ulcer. Pre-endoscopic considerations, such as the use of prokinetics and timing of endoscopy, are reviewed. In addition, this article examines aspects of postendoscopic care such as the effectiveness, dosing, and duration of postendoscopic proton-pump inhibitors, Helicobacter pylori testing, and benefits of treatment in terms of preventing rebleeding; and the use of nonsteroidal anti-inflammatory drugs, antiplatelet agents, and oral anticoagulants, including direct thrombin and Xa inhibitors, following acute peptic ulcer bleeding. Copyright © 2014 Elsevier Inc. All rights reserved.

Some Aspects of an Air-Core Single-Coil Magnetic Suspension System

NASA Technical Reports Server (NTRS)

Hamlet, Irvin L.; Kilgore, Robert A.

1966-01-01

This paper presents some of the technical aspects in the development at the Langley Research Center of an air-cove, dual-wound, single-coil, magnetic-suspension system with one-dimensional control. Overall electrical system design features and techniques are discussed in addition to the problems of control and stability. Special treatment is given to the operation of a dual-wound, high-current support coil which provides the bias fields and superimposed modulated field. Other designs features include a six-phase, solid-state power stage for modulation of the relatively large magnitude control current, and an associated six-phase trigger circuit.

[Application of ultrasound counter currentextraction in patent of traditional Chinese medicine].

PubMed

Miao, Yan-ni; Wu, Bin; Yue, Xue-lian

2015-07-01

The patent information of ultrasound countercurrent extraction used in traditional Chinese medicine was analyzed in this paper by the samples from Derwent World Patent Database (DWPI) and the Chinese Patent Abstracts Database (CNABS). The application of ultrasound countercurrent was discussed with the patent applicant,the amount of the annual distribution, and the pharmaceutical raw materials and other aspects. While the technical parameters published in the patent was deeply analyzed, such as material crushing, extraction solvent, extraction time and temperature, extraction equipment and ultrasonic frequency. Thought above research, various technical parameters of ultrasound countercurrent extraction used in traditional Chinese was summarize. The analysis conclusion of the paper can be used in discovering the technical advantages, optimizing extraction conditions, and providing a reference to extraction technological innovation of traditional Chinese medicine.

Nuclear cardiac imaging: Principles and applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iskandrian, A.S.

1987-01-01

This book is divided into 11 chapters. The first three provide a short description of the instrumentation, radiopharmaceuticals, and imaging techniques used in nuclear cardiology. Chapter 4 discusses exercise testing. Chapter 5 gives the theory, technical aspects, and interpretations of thallium-201 myocardial imaging and radionuclide ventriculography. The remaining chapters discuss the use of these techniques in patients with coronary artery disease, acute myocardial infarction, valvular heart disease, and other forms of cardiac disease. The author intended to emphasize the implications of nuclear cardiology procedures on patient care management and to provide a comprehensive bibliography.

Mammalian Developmental Genetics in the Twentieth Century

PubMed Central

Artzt, Karen

2012-01-01

This Perspectives is a review of the breathtaking history of mammalian genetics in the past century and, in particular, of the ways in which genetic thinking has illuminated aspects of mouse development. To illustrate the power of that thinking, selected hypothesis-driven experiments and technical advances are discussed. Also included in this account are the beginnings of mouse genetics at the Bussey Institute, Columbia University, and The Jackson Laboratory and a retrospective discussion of one of the classic problems in developmental genetics, the T/t complex and its genetic enigmas. PMID:23212897

Mammalian developmental genetics in the twentieth century.

PubMed

Artzt, Karen

2012-12-01

This Perspectives is a review of the breathtaking history of mammalian genetics in the past century and, in particular, of the ways in which genetic thinking has illuminated aspects of mouse development. To illustrate the power of that thinking, selected hypothesis-driven experiments and technical advances are discussed. Also included in this account are the beginnings of mouse genetics at the Bussey Institute, Columbia University, and The Jackson Laboratory and a retrospective discussion of one of the classic problems in developmental genetics, the T/t complex and its genetic enigmas.

Portal Vein Embolization: State-of-the-Art Technique and Options to Improve Liver Hypertrophy.

PubMed

Huang, Steven Y; Aloia, Thomas A

2017-12-01

Portal vein embolization (PVE) is associated with a high technical and clinical success rate for induction of future liver remnant hypertrophy prior to surgical resection. The degree of hypertrophy is variable and depends on multiple factors, including technical aspects of the procedure and underlying chronic liver disease. For patients with insufficient liver volume following PVE, adjunctive techniques, such as intra-portal administration of stem cells, dietary supplementation, transarterial embolization, and hepatic vein embolization, are available. Our purpose is to review the state-of-the-art technique associated with high-quality PVE and to discuss options to improve hypertrophy of the future liver remnant.

System contemplations for precision irrigation in agriculture

NASA Astrophysics Data System (ADS)

Schubert, Martin J. W.

2017-04-01

This communication contemplates political, biological and technical aspects for efficient and profitable irrigation in sustainable agriculture. A standard for irrigation components is proposed. The need for many, and three-dimensionally distributed, soil measurement points is explained, thus enabling the control of humidity in selected layers of earth. Combined wireless and wired data transmission is proposed. Energy harvesting and storage together with mechanical sensor construction are discussed.

Full-scale testing, production and cost analysis data for the advanced composite stabilizer for Boeing 737 aircraft. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

Aniversario, R. B.; Harvey, S. T.; Mccarty, J. E.; Parsons, J. T.; Peterson, D. C.; Pritchett, L. D.; Wilson, D. R.; Wogulis, E. R.

1983-01-01

The full scale ground test, ground vibration test, and flight tests conducted to demonstrate a composite structure stabilizer for the Boeing 737 aircraft and obtain FAA certification are described. Detail tools, assembly tools, and overall production are discussed. Cost analyses aspects covered include production costs, composite material usage factors, and cost comparisons.

Workshop on the Integration of Finite Element Modeling with Geometric Modeling

NASA Technical Reports Server (NTRS)

Wozny, Michael J.

1987-01-01

The workshop on the Integration of Finite Element Modeling with Geometric Modeling was held on 12 May 1987. It was held to discuss the geometric modeling requirements of the finite element modeling process and to better understand the technical aspects of the integration of these two areas. The 11 papers are presented except for one for which only the abstract is given.

Remote sensing by satellite - Technical and operational implications for international cooperation

NASA Technical Reports Server (NTRS)

Doyle, S. E.

1976-01-01

International cooperation in the U.S. Space Program is discussed and related to the NASA program for remote sensing of the earth. Satellite remote sensing techniques are considered along with the selection of the best sensors and wavelength bands. The technology of remote sensing satellites is considered with emphasis on the Landsat system configuration. Future aspects of remote sensing satellites are considered.

Research on spacecraft electrical power conversion

NASA Technical Reports Server (NTRS)

Wilson, T. G.

1983-01-01

The history of spacecraft electrical power conversion in literature, research and practice is reviewed. It is noted that the design techniques, analyses and understanding which were developed make today's contribution to power computers and communication installations. New applications which require more power, improved dynamic response, greater reliability, and lower cost are outlined. The switching mode approach in electronic power conditioning is discussed. Technical aspects of the research are summarized.

Towards Intelligent Control for Next Generation CESTOL Aircraft

NASA Technical Reports Server (NTRS)

Acosta, Diana Michelle

2008-01-01

This talk will present the motivation, research approach and status of intelligent control research for Next Generation Cruise Efficient Short Take Off and Landing (CESTOL) aircraft. An introduction to the challenges of CESTOL control will be given, leading into an assessment of potential control solutions. The approach of the control research will be discussed, including a brief overview of the technical aspects of the research.

Technical and Vocational Training in Kenya and the Harambee Institutes of Technology. Discussion Paper No. 169.

ERIC Educational Resources Information Center

Godfrey, E. M.

The paper is one of a series dealing with different aspects of the fund-raising campaign, which began in mid-1971, for the establishment throughout Kenya of a large number of institutes of technology on a self-help basis. By March 1973, 17 such institutes had been proposed. In the absence of coordination each institute's planning committee is…

Flexible manufacturing of aircraft engine parts

NASA Astrophysics Data System (ADS)

Hassan, Ossama M.; Jenkins, Douglas M.

1992-06-01

GE Aircraft Engines, a major supplier of jet engines for commercial and military aircraft, has developed a fully integrated manufacturing facility to produce aircraft engine components in flexible manufacturing cells. This paper discusses many aspects of the implementation including process technologies, material handling, software control system architecture, socio-technical systems and lessons learned. Emphasis is placed on the appropriate use of automation in a flexible manufacturing system.

Development of wavelet analysis tools for turbulence

NASA Technical Reports Server (NTRS)

Bertelrud, A.; Erlebacher, G.; Dussouillez, PH.; Liandrat, M. P.; Liandrat, J.; Bailly, F. Moret; Tchamitchian, PH.

1992-01-01

Presented here is the general framework and the initial results of a joint effort to derive novel research tools and easy to use software to analyze and model turbulence and transition. Given here is a brief review of the issues, a summary of some basic properties of wavelets, and preliminary results. Technical aspects of the implementation, the physical conclusions reached at this time, and current developments are discussed.

Automated Meta-Aircraft Operations for a More Efficient and Responsive Air Transportation System

NASA Technical Reports Server (NTRS)

Hanson, Curt

2015-01-01

A brief overview is given of the on-going NASA Automated Cooperative Trajectories project. Current status and upcoming work is previewed. The motivating factors and innovative aspects of ACT are discussed along with technical challenges and the expected system-level impacts if the project is successful. Preliminary results from the NASA G-III hardware in the loop simulation are included.

The Future Is Bright: How Can We Optimize Online Counseling, and How Can We Know Whether We Have Done So?

ERIC Educational Resources Information Center

Caspar, Franz; Berger, Thomas

2005-01-01

This article analyzes three original articles that include a wealth of information and ideas stimulating even for readers familiar with the domain as a springboard for further discussion. The areas covered include aspects related to the field's technical possibilities and problems in general and the use of online therapy for counseling …

Baby to Parent, Parent to Baby: A Guide to Developing Parent-Child Interaction in the First Twelve Months.

ERIC Educational Resources Information Center

Gordon, Ira J.

This non-technical book for parents discusses aspects of child care and family relations from the time of the baby's conception through the first year of its life, emphasizing ways of developing effective parent-child interaction. Topics covered include: preparing emotionally and physically for a baby; ways to "get to know" the baby during the…

From embodied mind to embodied robotics: humanities and system theoretical aspects.

PubMed

Mainzer, Klaus

2009-01-01

After an introduction (1) the article analyzes the evolution of the embodied mind (2), the innovation of embodied robotics (3), and finally discusses conclusions of embodied robotics for human responsibility (4). Considering the evolution of the embodied mind (2), we start with an introduction of complex systems and nonlinear dynamics (2.1), apply this approach to neural self-organization (2.2), distinguish degrees of complexity of the brain (2.3), explain the emergence of cognitive states by complex systems dynamics (2.4), and discuss criteria for modeling the brain as complex nonlinear system (2.5). The innovation of embodied robotics (3) is a challenge of future technology. We start with the distinction of symbolic and embodied AI (3.1) and explain embodied robots as dynamical systems (3.2). Self-organization needs self-control of technical systems (3.3). Cellular neural networks (CNN) are an example of self-organizing technical systems offering new avenues for neurobionics (3.4). In general, technical neural networks support different kinds of learning robots (3.5). Finally, embodied robotics aim at the development of cognitive and conscious robots (3.6).

Connecting Primary Health Care: A Comprehensive Pilot Study.

PubMed

Maghsoudloo, Mehran; Abolhassani, Farid; Lotfibakhshaiesh, Nasrin

2016-07-01

The collection of data within the primary health care facilities in Iran is essentially paper-based. It is focused on family's health, monitoring of non-infectious and infectious diseases. Clearly due to the paper-based nature of the tasks, timely decision making at most can be difficult if not impossible. As part of an on-going electronic health record implementation project at Tehran University of Medical Sciences, for the first time in the region, based on a comprehensive pilot project, four urban healthcare facilities are connected to their headquarters and beyond, covering all aspects of primary health care, for the last four years. Without delving into the technical aspects of its software engineering processes, the progress of the implementation is reported, selection of summarized data is presented, and experience gained thus far are discussed. Four years passed and if time is any important reason to go by, then it is safe to accept that the software architecture and electronic health record structural model implemented are robust and yet extensible. Aims and duration of a pilot study should be clearly defined prior to start and managed till its completion. Resistance to change and particularly to information technology, apart from its technical aspects, is also based on human factors.

Technical aspects of telepathology with emphasis on future development.

PubMed

Schwarzmann, P; Binder, B; Klose, R

2000-01-01

Pathology undergoes presently changes due to new developments in diagnostic opportunities and cost saving efforts in health care. Out of the wide field of telepathology the paper selects three prototype applications: telepathology in teleeducation, expert advice for preselected details of a slide and finally telepathology for remote diagnosis. The most challenging field for remote diagnosis is the application in the frozen section scenario. The paper starts with the mental experiment to map conventional procedures to counterparts in telepathology. Technical opportunities and economical restrictions of telepathology equipment are discussed with respect to the components: electronic camera, display devices, haptic sensors and displays, available telecommunication channels and telepathology software. As an example and for illustration of the state of the art for an advanced telemicroscopy system able to perform remote frozen section diagnosis, the HISTKOM equipment is presented in more details. The section concerning future developments regards the aspects of the acceptance by tentative users, legal aspects, costs and affordability of equipment, the market for equipment components and the adequate telecommunication services. Further is regarded the mutual influence of properties of existing systems and application experiences gained with them on the next generation of equipment and application software. Conclusions and references close the paper.

Elements of Engineering Excellence

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer

2012-01-01

The inspiration for this Contract Report (CR) originated in discussions with the director of Marshall Space Flight Center (MSFC) Engineering who asked that we investigate the question: "How do you achieve excellence in aerospace engineering?" Engineering a space system is a complex activity. Avoiding its inherent potential pitfalls and achieving a successful product is a challenge. This CR presents one approach to answering the question of how to achieve Engineering Excellence. We first investigated the root causes of NASA major failures as a basis for developing a proposed answer to the question of Excellence. The following discussions integrate a triad of Technical Understanding and Execution, Partnership with the Project, and Individual and Organizational Culture. The thesis is that you must focus on the whole process and its underlying culture, not just on the technical aspects. In addition to the engineering process, emphasis is given to the need and characteristics of a Learning Organization as a mechanism for changing the culture.

Technical Aspects of Acoustical Engineering for the ISS [International Space Station

NASA Technical Reports Server (NTRS)

Allen, Christopher S.

2009-01-01

It is important to control acoustic levels on manned space flight vehicles and habitats to protect crew-hearing, allow for voice communications, and to ensure a healthy and habitable environment in which to work and live. For the International Space Station (ISS) this is critical because of the long duration crew-stays of approximately 6-months. NASA and the JSC Acoustics Office set acoustic requirements that must be met for hardware to be certified for flight. Modules must meet the NC-50 requirement and other component hardware are given smaller allocations to meet. In order to meet these requirements many aspects of noise generation and control must be considered. This presentation has been developed to give an insight into the various technical activities performed at JSC to ensure that a suitable acoustic environment is provided for the ISS crew. Examples discussed include fan noise, acoustic flight material development, on-orbit acoustic monitoring, and a specific hardware development and acoustical design case, the ISS Crew Quarters.

Teleoncology in the Department of Defense: a tale of two systems.

PubMed

Hunter, D C; Brustrom, J E; Goldsmith, B J; Davis, L J; Carlos, M; Ashley, E; Gardner, G; Gaal, I

1999-01-01

Two telemedicine networks were developed for the purpose of conducting multidisciplinary oncology ("teleoncology") conferences. The infrastructure of each system differed: one system was Internet-based; the other was delivered via Integrated Services Digital Network (ISDN) lines. The purpose of this study was to describe the infrastructure and cost, consultative process, technical aspects, and conference format of the two teleoncology programs. The two systems' technical aspects, participant satisfaction with the systems, and conference participation were compared qualitatively. Assessment of the technical aspects of the systems suggested that each had distinct advantages. Survey results indicated that provider satisfaction with the technical and logistical aspects of each type of teleoncology conference was high. The present study may prove helpful for individuals who are considering implementing their own teleoncology programs.

A psycho-endocrinological overview of transsexualism.

PubMed

Michel, A; Mormont, C; Legros, J J

2001-10-01

The technical possibility of surgical sex change has opened up a debate concerning the legitimacy and utility of carrying out such an intervention at the request of the transsexual. Diagnostic, psychological, medical and ethical arguments have been brought forth, both for and against. Nonetheless, anatomical transformation by surgical means has currently become a practice as the frequency of serious gender identity disorders is constantly progressing. After a brief introduction, the present paper will consider typological, aetiological and epidemiological aspects of transsexualism. Treatment of the sex change applicant is then defined and discussed in terms of psychological, psychiatric, endocrinological and surgical aspects. Finally, the question of post-operation follow-up will be examined.

Internal dosimetry technical basis manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-20

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophicalmore » discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.« less

Seminar on Understanding Digital Control and Analysis in Vibration Test Systems, part 2

NASA Technical Reports Server (NTRS)

1975-01-01

A number of techniques for dealing with important technical aspects of the random vibration control problem are described. These include the generation of pseudo-random and true random noise, the control spectrum estimation problem, the accuracy/speed tradeoff, and control correction strategies. System hardware, the operator-system interface, safety features, and operational capabilities of sophisticated digital random vibration control systems are also discussed.

Comparative Study Of Image Enhancement Algorithms For Digital And Film Mammography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delgado-Gonzalez, A.; Sanmiguel, R. E.

2008-08-11

Here we discuss the application of edge enhancement algorithms on images obtained with a Mammography System which has a Selenium Detector and on the other hand, on images obtained from digitized film mammography. Comparative analysis of such images includes the study of technical aspects of image acquisition, storage, compression and display. A protocol for a local database has been created as a result of this study.

X-ray lasers

NASA Astrophysics Data System (ADS)

Elton, Raymond C.

Theoretical and practical aspects of X-ray lasers are discussed in an introduction emphasizing recent advances. Chapters are devoted to the unique optical properties of the X-ray spectral region, the principles of short-wavelength lasers, pumping by exciting plasma ions, pumping by electron capture into excited ionic states, pumping by ionization of atoms and ions, and alternative approaches. The potential scientific, technical, biological, and medical applications of X-ray lasers are briefly characterized.

Technical and Economic Aspects of Low Emission Reduction in Poland

NASA Astrophysics Data System (ADS)

Dzikuć, M.; Łasiński, K.

2017-12-01

The paper presents the problem of excessive air pollution in Poland caused mainly by low emission. The emission arises in result of heating flats by means of old and energetically inefficient heating installations. In Poland and Bulgaria the inhaled air is of the worst quality out of all EU countries. The paper presents economic and technical problems related to low emission occurring during the combustion of solid fuels in local boiler houses. Furthermore, the most significant economic issues, connected with the reduction of low emission are discussed, as well as technological possibilities of efficient reduction of the amount of pollution in the atmosphere. Conclusions are presented at the end of the article.

Implementation of IT-based applications in the safeguards field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekenstam, G.C. af; Sallstrom, M.

1995-12-31

For many years the Swedish Nuclear Power Inspectorate, SKI, has used computers as a tool within nuclear material control and accountancy. Over the last five years a lot of effort has been put into projects related to the increasing possibilities of fast and reliable data transfer over large distances. The paper discusses related administrative and technical issues and presents experience gained in tasks of the Swedish Support Program to IAEA Safeguards and during the alternative Safeguards trials carried out by SKI. The following topics will be presented: (1) Main Safeguards purposes and data transfer; (2) Administrative systems and requirements; (3)more » Technical possibilities and experiences; and (4) The cost aspect.« less

An X Window system for statlab results reporting.

PubMed Central

Barrows, R. C.; Allen, B.; Fink, D. J.

1993-01-01

We have developed a system that receives "stat" results encoded in Health Level Seven from the Laboratory Information System, prints a report in destination Intensive Care Units (ICUs), and captures the data for review in a custom spreadsheet format at color X-terminals located in ICUs. Available services include a reference nomogram plot of arterial blood gas data, printed summaries, automated access to the Clinical Information System and a Medline database, electronic mail, a simulated electronic calculator, and general news and information. Security mechanisms include an audit trail of user activities on the system. Noteworthy technical aspects and non-technical factors impacting success are discussed. Images Figure 2 Figure 3 PMID:8130490

Voprosy professional'noj pedagogiki (Aspects of the Theory of Vocational Education).

ERIC Educational Resources Information Center

Batysev, S. J.; And Others

This document is an English-language abstract (Approximately 1,500 words) of a book by several Soviet authorities on vocational and technical education. The five sections of the book deal with general aspects of vocational and technical training; the theory of vocational training; psychological aspects of vocational training; basic instructional…

Research Update: The materials genome initiative: Data sharing and the impact of collaborative ab initio databases

DOE PAGES

Jain, Anubhav; Persson, Kristin A.; Ceder, Gerbrand

2016-03-24

Materials innovations enable new technological capabilities and drive major societal advancements but have historically required long and costly development cycles. The Materials Genome Initiative (MGI) aims to greatly reduce this time and cost. Here, we focus on data reuse in the MGI and, in particular, discuss the impact of three different computational databases based on density functional theory methods to the research community. Finally, we discuss and provide recommendations on technical aspects of data reuse, outline remaining fundamental challenges, and present an outlook on the future of MGI's vision of data sharing.

Expanding the Repertoire: An Anthology of Practical Approaches for the Teaching of Writing (Reading-to-Write Report No. 11). Technical Report No. 30.

ERIC Educational Resources Information Center

McCormick, Kathleen; And Others

This study is the 11th and last report from the Reading-to-Write Project, a collaborative study of students' cognitive processes at one critical point of entry into academic performance. The report consists of an Introduction and seven essays, each of which discusses ways to teach a variety of aspects of reading and writing which have been tried…

UPEC `94 review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, T.J.

1995-02-01

The twenty-ninth Universities Power Engineering Conference (UPEC `94), held September 14--16, 1994, at University College, Galway, Ireland, surpassed all previous meetings in respect of number and quality of technical content of the papers and number of delegates attending. As in the past, it had a broad theme, covering all aspects of electrical power engineering, and was attended by academics, research workers, and members of the power service and manufacturing organizations. During the sessions, 265 papers from more than 30 countries were debated. There were 27 technical sessions, 3 poster sessions, and an opening and a closing session, 160 papers beingmore » presented orally in four groups of parallel sessions, the remainder being presented in poster sessions. The high standard of the papers, presentations, and technical discussions was particularly gratifying. The Universities Power Engineering Conference, held annually, provides a forum for the exchange of ideas among practicing engineers from the universities, consultants, and in the manufacturing and supply industries.« less

Software engineering aspects of real-time programming concepts

NASA Astrophysics Data System (ADS)

Schoitsch, Erwin

1986-08-01

Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

A Toxicology for the 21st Century—Mapping the Road Ahead

PubMed Central

Hartung, Thomas

2009-01-01

The landmark publication by the National Research Council putting forward a vision of a toxicology for the 21st century in 2007 has created an atmosphere of departure in our field. The alliances formed, symposia and meetings held and the articles following are remarkable, indicating that this is an idea whose time has come. Most of the discussion centers on the technical opportunities to map pathways of toxicity and the financing of the program. Here, the other part of the work ahead shall be discussed, that is, the focus is on regulatory implementation once the technological challenges are managed, but we are well aware that the technical aspects of what the National Academy of Science report suggests still need to be addressed: A series of challenges are put forward which we will face in addition to finding a technical solution (and its funding) to set this vision into practice. This includes the standardization and quality assurance of novel methodologies, their formal validation, their integration into test strategies including threshold setting and finally a global acceptance and implementation. This will require intense conceptual steering to have all pieces of the puzzle come together. PMID:19357069

Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Shah, Nihar; Phadke, Amol

Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less

The Systems Test Architect: Enabling The Leap From Testable To Tested

DTIC Science & Technology

2016-09-01

engineering process requires an interdisciplinary approach, involving both technical and managerial disciplines applied to the synthesis and integration...relationship between the technical and managerial aspects of systems engineering. TP-2003-020-01 describes measurement as having the following...it is evident that DOD makes great strides to tackle both the managerial and technical aspects of test and evaluation within the systems

Multimodal Analgesia in Breast Surgical Procedures: Technical and Pharmacological Considerations for Liposomal Bupivacaine Use

PubMed Central

Newman, Martin I.; Seeley, Neil; Hutchins, Jacob; Smith, Kevin L.; Mena, Gabriel; Selber, Jesse C.; Saint-Cyr, Michel H.; Gadsden, Jeffrey C.

2017-01-01

Enhanced recovery after surgery is a multidisciplinary perioperative clinical pathway that uses evidence-based interventions to improve the patient experience as well as increase satisfaction, reduce costs, mitigate the surgical stress response, accelerate functional recovery, and decrease perioperative complications. One of the most important elements of enhanced recovery pathways is multimodal pain management. Herein, aspects relating to multimodal analgesia following breast surgical procedures are discussed with the understanding that treatment decisions should be individualized and guided by sound clinical judgment. A review of liposomal bupivacaine, a prolonged-release formulation of bupivacaine, in the management of postoperative pain following breast surgical procedures is presented, and technical guidance regarding optimal administration of liposomal bupivacaine is provided. PMID:29062649

Joint stars phased array radar antenna

NASA Astrophysics Data System (ADS)

Shnitkin, Harold

1994-10-01

The Joint STARS phased array radar system is capable of performing long range airborne surveillance and was used during the Persian Gulf war on two E8-A aircraft to fly many around-the-clock missions to monitor the Kuwait and Iraq battlefield from a safe distance behind the front lines. This paper is a follow-on to previous publications on the subject of the Joint STARS antenna and deals mainly with mission performance and technical aspects not previously covered. Radar data of troop movements and armament installations will be presented, a brief review of the antenna design is given, followed by technical discussions concerning the three-port interferometry, gain and sidelobe design approach, cost control, range test implementation and future improvements.

Satellite power system: Concept development and evaluation program, reference system report

NASA Technical Reports Server (NTRS)

1979-01-01

The Satellite Power System (SPS) Reference System is discussed and the technical and operational information required in support of environmental, socioeconomic, and comparative assessment studies are emphasized. The reference System concept features a gallium-aluminum-arsenide, and silicon solar cell options. Other aspects of an SPS are the construction of bases in space, launch and mission control bases on earth, and fleets of various transportation vehicles to support the construction and maintenance operations of the satellites.

Historics of the Space Tracking And Data Acquisition Network (STADAN), the Manned Space Flight Network (MSFN), and the NASA Communications Network (NASCOM)

NASA Technical Reports Server (NTRS)

Corliss, W. R.

1974-01-01

The historical and technical aspects of the major networks which comprise the NASA tracking and data acquisition system are considered in a complete reference work which traces the origin and growth of STADAN, MSFN, and NASCOM up to mid-1971. The roles of these networks in both the Gemini and Apollo programs are discussed, and the separate developmental trends are identified for each network.

Remote autopsy services: A feasibility study on nine cases.

PubMed

Vodovnik, Aleksandar; Aghdam, Mohammad Reza F; Espedal, Dan Gøran

2017-01-01

Introduction We have conducted a feasibility study on remote autopsy services in order to increase the flexibility of the service with benefits for teaching and interdepartmental collaboration. Methods Three senior staff pathologists, one senior autopsy technician and one junior resident participated in the study. Nine autopsies were performed by the autopsy technician or resident, supervised by the primary pathologist, through the secure, double encrypted video link using Jabber Video (Cisco) with a high-speed broadband connection. The primary pathologist and autopsy room each connected to the secure virtual meeting room using 14″ laptops with in-built cameras (Hewlett-Packard). A portable high-definition web camera (Cisco) was used in the autopsy room. Primary and secondary pathologists independently interpreted and later compared gross findings for the purpose of quality assurance. The video was streamed live only during consultations and interpretation. A satisfaction survey on technical and professional aspects of the study was conducted. Results Independent interpretations of gross findings between primary and secondary pathologists yielded full agreement. A definite cause of death in one complex autopsy was determined following discussions between pathologists and reviews of the clinical notes. Our satisfaction level with the technical and professional aspects of the study was 87% and 97%, respectively. Discussion Remote autopsy services are found to be feasible in the hands of experienced staff, with increased flexibility and interest of autopsy technicians in the service as a result.

NASA Aerospace Flight Battery Program: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries; Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries; Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop). Volume 1, Part 1

NASA Technical Reports Server (NTRS)

Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 1 - Volume I: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries, Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries, and Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop).

Feasibility Study Analysis of Establishing Archery Sports Special Place

NASA Astrophysics Data System (ADS)

Tarigan, U. P. P.; Mardhatillah, A.; Budiman, I.; Sembiring, A. C.; Ramadhan, M. S.

2018-04-01

This study essentially discusses the basic concepts related to the decision and process of selecting a sports archery business project in order to provide economic and social benefits over time. Archery sports is a sport that requires special skills, both accuracy, coordination mental training and improves the physical condition of the prime. In Medan, it's still a bit of practice archery, but many people love this sport. From the data collected, there are three locations where archery in the city of the field of the Sunggal Knights is located at Jl Tunggul Hitam no.1A, Kec. Medan Sunggal, Avros Educational Park Aval address at Avros Street No.60 Medan, and the Knights of Johor Archery Club which is located at Jl. The work of Darma Gg. Ujung Family, Medan Johor. Therefore a feasibility study was undertaken in establishing an archery sports place in the field. The aspects to be considered in making feasibility studies are market and marketing aspects, technical and equipment aspects, management aspects, legal aspects, economic and social aspects, and financial aspects. Financial analysis using own capital got Payback Period 3 years 5,8 months, Net Present Value Rp 11.684.026 and obtained Internal Rate of Return of 17%.

Standards for Cell Line Authentication and Beyond

PubMed Central

Cole, Kenneth D.; Plant, Anne L.

2016-01-01

Different genomic technologies have been applied to cell line authentication, but only one method (short tandem repeat [STR] profiling) has been the subject of a comprehensive and definitive standard (ASN-0002). Here we discuss the power of this document and why standards such as this are so critical for establishing the consensus technical criteria and practices that can enable progress in the fields of research that use cell lines. We also examine other methods that could be used for authentication and discuss how a combination of methods could be used in a holistic fashion to assess various critical aspects of the quality of cell lines. PMID:27300367

Bone scintigraphy in skeletal trauma.

PubMed

Holder, L E

1993-07-01

This article emphasizes the usefulness of radionuclide bone imaging (RNBI) throughout the clinical spectrum of osseous trauma and relates RNBI to the other imaging modalities available. Acute, stress, insufficiency, avulsion, and occult fracture detection are discussed and illustrated. Other traumatic lesions including the bone bruise, shin splints, tendinitis and epiphyseal injuries are included. Biomechanical lesions, the result of more chronic low level repetitive stress are discussed in detail, as is the use of RNBI in the detection of post-traumatic sequela such as the reflex sympathetic dystrophy syndrome. Technical aspects of RNBI are considered in the context of producing the quality of diagnostic images necessary for clinically complete consultative reporting.

Two paths from lab to market: Product and standard

NASA Astrophysics Data System (ADS)

Knapp, Robert H.

2018-01-01

To shed light on the movement of sustainable technologies from basic science to widespread use, this chapter describes key aspects of the quite different paths followed by two important examples—photovoltaics (a product) and passive-house buildings (a standard). Discussion of photovoltaics includes the experience curve concept, the increasing significance of balance-of-system costs, and the importance of market heterogeneity (niches and sub-national markets) to the long-term trajectory of major cost reductions. Discussion of passive-houses highlights the array of technical developments needed for present-day energy efficient houses, and the relevance of "stretch" standards to the development of a market for very high-performance houses.

Pollution of surface water in Europe

PubMed Central

Key, A.

1956-01-01

This paper discusses pollution of surface water in 18 European countries. For each an account is given of its physical character, population, industries, and present condition of water supplies; the legal, administrative, and technical means of controlling pollution are then described, and an outline is given of current research on the difficulties peculiar to each country. A general discussion of various aspects common to the European problem of water pollution follows; standards of quality are suggested; some difficulties likely to arise in the near future are indicated, and international collaboration, primarily by the exchange of information, is recommended to check or forestall these trends. PMID:13374532

Technical aspects of cardiac PET/MRI.

PubMed

Masuda, Atsuro; Nemoto, Ayaka; Takeishi, Yasuchika

2018-06-01

PET/MRI is a novel modality that enables to combine PET and MR images, and has significant potential to evaluate various cardiac diseases through the combination of PET molecular imaging and MRI functional imaging. Precise management of technical issues, however, is necessary for cardiac PET/MRI. This article describes several technical points, including patient preparation, MR attenuation correction, parallel acquisition of PET with MRI, clinical aspects, and image quality control.

Addressing Unison and Uniqueness of Reliability and Safety for Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2015-01-01

For a long time, both in theory and in practice, safety and reliability have not been clearly differentiated, which leads to confusion, inefficiency, and sometime counter-productive practices in executing each of these two disciplines. It is imperative to address the uniqueness and the unison of these two disciplines to help both disciplines become more effective and to promote a better integration of the two for enhancing safety and reliability in our products as an overall objective. There are two purposes of this paper. First, it will investigate the uniqueness and unison of each discipline and discuss the interrelationship between the two for awareness and clarification. Second, after clearly understanding the unique roles and interrelationship between the two in a product design and development life cycle, we offer suggestions to enhance the disciplines with distinguished and focused roles, to better integrate the two, and to improve unique sets of skills and tools of reliability and safety processes. From the uniqueness aspect, the paper identifies and discusses the respective uniqueness of reliability and safety from their roles, accountability, nature of requirements, technical scopes, detailed technical approaches, and analysis boundaries. It is misleading to equate unreliable to unsafe, since a safety hazard may or may not be related to the component, sub-system, or system functions, which are primarily what reliability addresses. Similarly, failing-to-function may or may not lead to hazard events. Examples will be given in the paper from aerospace, defense, and consumer products to illustrate the uniqueness and differences between reliability and safety. From the unison aspect, the paper discusses what the commonalities between reliability and safety are, and how these two disciplines are linked, integrated, and supplemented with each other to accomplish the customer requirements and product goals. In addition to understanding the uniqueness in reliability and safety, a better understanding of unison and commonalities will further help in understanding the interaction between reliability and safety. This paper discusses the unison and uniqueness of reliability and safety. It presents some suggestions for better integration of the two disciplines in terms of technical approaches, tools, techniques, and skills to enhance the role of reliability and safety in supporting a product design and development life cycle. The paper also discusses eliminating the redundant effort and minimizing the overlap of reliability and safety analyses for an efficient implementation of the two disciplines.

Future perspectives on space psychology: Recommendations on psychosocial and neurobehavioural aspects of human spaceflight

NASA Astrophysics Data System (ADS)

De La Torre, Gabriel G.; van Baarsen, Berna; Ferlazzo, Fabio; Kanas, Nick; Weiss, Karine; Schneider, Stefan; Whiteley, Iya

2012-12-01

Recently the psychological effects of space flight have gained in attention. In uncovering the psychological challenges that individuals and teams can face, we need research options that integrate psychosocial aspects with behavioral, performance, technical and environmental issues. Future perspectives in Space Psychology and Human Spaceflight are reviewed in this paper. The topics covered include psychosocial and neurobehavioural aspects, neurocognitive testing tools, decision making, autonomy and delayed communications, well being, mental health, situational awareness, and methodology. Authors were members of a European Space Agency (ESA) Research Topical Team on Psychosocial and Behavioral Aspects of Human Spaceflight. They discuss the different topics under a common perspective of a theoretical and practical framework, showing interactions, relationships and possible solutions for the different aspects and variables in play. Recommendations for every topic are offered and summarized for future research in the field. The different proposed research ideas can be accomplished using analogs and simulation experiments, short- and long-duration bed rest, and in-flight microgravity studies. These topics are especially important for future Moon and Mars mission design and training.

A practical guide to diagnostic transcranial magnetic stimulation: Report of an IFCN committee

PubMed Central

Groppa, S.; Oliviero, A.; Eisen, A.; Quartarone, A.; Cohen, L.G.; Mall, V.; Kaelin-Lang, A.; Mima, T.; Rossi, S.; Thickbroom, G.W.; Rossini, P.M.; Ziemann, U.; Valls-Solé, J.; Siebner, H.R.

2016-01-01

Transcranial magnetic stimulation (TMS) is an established neurophysiological tool to examine the integrity of the fast-conducting corticomotor pathways in a wide range of diseases associated with motor dysfunction. This includes but is not limited to patients with multiple sclerosis, amyotrophic lateral sclerosis, stroke, movement disorders, disorders affecting the spinal cord, facial and other cranial nerves. These guidelines cover practical aspects of TMS in a clinical setting. We first discuss the technical and physiological aspects of TMS that are relevant for the diagnostic use of TMS. We then lay out the general principles that apply to a standardized clinical examination of the fast-conducting corticomotor pathways with single-pulse TMS. This is followed by a detailed description of how to examine corticomotor conduction to the hand, leg, trunk and facial muscles in patients. Additional sections cover safety issues, the triple stimulation technique, and neuropediatric aspects of TMS. PMID:22349304

PREFACE: VI Scientific Technical Conference on "Low-temperature plasma during the deposition of functional coatings"

NASA Astrophysics Data System (ADS)

2014-11-01

The VI Republican Scientific Technical Conference "Low-temperature plasma during the deposition of functional coatings" took place from 4 to 7 November 2014 at the Academy of Sciences of the Republic of Tatarstan and the Kazan Federal University. The conference was chaired by a Member of the Academy of Sciences of the Republic of Tatarstan Nail Kashapov -Professor, Doctor of Technical Sciences- a member of the Scientific and Technical Council of the Ministry of Economy of the Republic of Tatarstan. At the conference, the participants discussed a wide range of issues affecting the theoretical and computational aspects of research problems in the physics and technology of low-temperature plasma. A series of works were devoted to the study of thin films obtained by low-temperature plasma. This year work dedicated to the related field of heat mass transfer in multiphase media and low-temperature plasma was also presented. Of special interest were reports on the exploration of gas discharges with liquid electrolytic electrotrodes and the study of dusty plasmas. Kashapov Nail, D.Sc., Professor (Kazan Federal University)

Modified puestow lateral pancreaticojejunostomy.

PubMed

Ceppa, Eugene P; Pappas, Theodore N

2009-05-01

There are various surgical options for the treatment of pain associated with chronic pancreatitis. The modified Puestow lateral pancreaticojejunostomy has been proven to be effective in ameliorating symptoms and expediting return to normal lifestyle while maintaining a low rate of morbidity and mortality. However, the debate regarding which surgical treatment provides the best outcomes is controversial. The aims of this manuscript are to identify the patient population for which the Puestow benefits the most and discuss the pertinent technical aspects of the surgical procedure.

Cell electrophoresis for diagnostic purposes. II. Critical evaluation of conventional cytopherometry.

PubMed Central

Hoffmann, W.; Kaufmann, R.; Steiner, R.; Werner, W.

1981-01-01

Determination of the electrophoretic mobility of test cells has been widely used in an attempt to detect so-called lymphokines in a laboratory test for cancer, but operational difficulties are inherent in conventional cytopherometers. This study therefore investigates the technical and operational aspects of cell electrophoresis, using the Zeiss cytopherometer; e.g. influence of electro-osmosis, focus uncertainty, movement due to convection and other sources of error. Implications and possible improvements in the test are discussed. PMID:7248145

Broadsheet number 57: problems in fine needle biopsy of the thyroid.

PubMed

Orell, S R; Philips, J

2000-08-01

The role of fine needle biopsy and cytological diagnosis in the preoperative evaluation of thyroid nodules is reviewed on the basis of the current literature as well as the authors' personal experience. Technical aspects and guidelines for reporting thyroid samples are discussed in some detail. The main emphasis is on diagnostic pitfalls, those which may lead to a false-negative diagnosis, to a false-positive diagnosis or to an erroneous typing of the lesion, and their cytological patterns are described.

Industrial sterilization in Turkey: Status, prospects and regulations

NASA Astrophysics Data System (ADS)

Erkol, A. Y.

1995-09-01

The use of disposable hypodermic syringes has been mandatory in Turkey since 1986. Today, there is a sizable production of disposable medical products in Turkey and likely to increase in the next 2-3 years. The status of the disposable industries is investigated and their production profile is given. Also, some technical details are given about the two industrial irradiation plants of Turkey commissioned recently. The legal aspects of sterilization in Turkey are briefly discussed. Furthermore, the impact of commissioning these plants is described.

Two case reports of unexpected tracheal agenesis in the neonate: 3 C's beyond algorithms for difficult airway management.

PubMed

Grass, Beate; Simma, Leopold; Reinehr, Michael; Zimmermann, Urs; Gysin, Claudine; Henze, Georg; Cannizzaro, Vincenzo

2017-02-08

Handling neonates with postnatal respiratory failure due to congenital airway malformations implies knowledge about emergency management of unexpected difficult airway. In these stressful situations both technical and communication skills of the caretakers are essential. Two cases with prenatally unknown tracheal agenesis are reported. In the presented cases, airway malformation and subsequent difficulties upon endotracheal intubation were not adequately communicated between caretakers. We discuss the aspects of culture, communication, and capnography.

SumutSiana

NASA Astrophysics Data System (ADS)

Nasution, M. K. M.

2018-02-01

Technically, a definition is at the heart of all forms of understanding. However, in the engineering aspect, the introduction becomes a first step that expands the meaning and function of definitions used for something, especially a particular study. SumutSiana is a term specifically constructed to understand not only North Sumatra culture, but the natural wealth required in social engineering, and this paper becomes infrastructure for it. SumutSiana is disclosed as a scope of discussion on natural resources, culture, human resources, and all related to North Sumatra.

Preparing future space leaders - International Space University

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Van Reeth, George P.

1992-01-01

The International Space University (ISU) concept of developing a cadre of space professionals that will lead the universities and industries into space is discussed. ISU is an innovative, permanent worldwide organization for training and academic instruction in all aspects of space studies. ISU's major goal is to provide the young professional academic instruction in technical and nontechnical areas of modern space exploration and research, and a forum to exchange ideas and develop both personal and professional ties at an international level.

Open questions in the management of nodular lymphocyte predominant hodgkin lymphoma.

PubMed

Tyran, Marguerite; Gonzague, Laurence; Bouabdallah, Reda; Resbeut, Michel

2014-01-01

Localized Nodular Lymphocyte Predominant Hodgkin Lymphoma is a rare disease with an overall good prognosis but frequent late relapses. Due to it's rarity there is no standard therapeutic approach and pathological diagnosis may be hard. In this paper we discuss the technical aspects of the radiation therapy and histological issues. The new fields reductions proposed for classical Hodgkin lymphoma cannot be applied to early stages Nodular Lymphocyte Predominant Hodgkin lymphomas which are usually treated with radiation therapy without systemic chemotherapy.

Counting your chickens before they're hatched: power analysis.

PubMed

Jupiter, Daniel C

2014-01-01

How does an investigator know that he has enough subjects in his study design to have the predicted outcomes appear statistically significant? In this Investigators' Corner I discuss why such planning is necessary, give an intuitive introduction to the calculations needed to determine required sample sizes, and hint at some of the more technical difficulties inherent in this aspect of study planning. Copyright © 2014 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Challenges in detecting drowsiness based on driver’s behavior

NASA Astrophysics Data System (ADS)

Triyanti, V.; Iridiastadi, H.

2017-12-01

Drowsiness while driving has been a critical issue within the context of transportation safety. A number of approaches have been developed to reduce the risks of drowsy drivers. The mechanisms in detecting fatigue and sleepiness while driving has been categorized into three broad approaches, including vehicle-based, physiological-based, and behavior-based approaches. This paper will discuss recent studies in recognizing drowsy drivers based on their behaviors, particularly changes in eyes and facial characteristics. This paper will also address challenges in capturing aspects of natural expressions, driver responses, behavior, and task environment associated with sleepiness. Additionally, a number of technical aspects should be seriously considered, including correctly capturing face and eye characteristics from unwanted movements, unsuitable task environments, technological limitations, and individual differences.

fMRI paradigm designing and post-processing tools

PubMed Central

James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

2014-01-01

In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result. PMID:24851001

NASA Aerospace Flight Battery Program: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements. Volume 2/Part 2

NASA Technical Reports Server (NTRS)

Jung, David S.; Manzo, Michelle A.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 2 - Volume II Appendix A to Part 2 - Volume I.

Discussion on the Technology and Method of Computer Network Security Management

NASA Astrophysics Data System (ADS)

Zhou, Jianlei

2017-09-01

With the rapid development of information technology, the application of computer network technology has penetrated all aspects of society, changed people's way of life work to a certain extent, brought great convenience to people. But computer network technology is not a panacea, it can promote the function of social development, but also can cause damage to the community and the country. Due to computer network’ openness, easiness of sharing and other characteristics, it had a very negative impact on the computer network security, especially the loopholes in the technical aspects can cause damage on the network information. Based on this, this paper will do a brief analysis on the computer network security management problems and security measures.

Current principles and practice in autologous intraportal islet transplantation: a meta-analysis of the technical considerations.

PubMed

Kumar, Rohan; Chung, Wen Yuan; Dennison, Ashley Robert; Garcea, Giuseppe

2016-04-01

Autologous islet transplantation (IAT) following pancreatectomy is now a recognized, albeit highly specialized procedure carried out in a small number of centers worldwide. Current clinical principles and best practice with emphasis on examining the technical aspects of surgery in centers with significant IAT experience are reviewed. Literature search for studies discussing any technical aspect of pancreatectomy with intraportal IAT was included. Thirty-five papers were included; all were single-center case series. The indications, surgical approach to pancreatectomy with IAT, islet yield, static pancreas preservation prior to islet digestion, portal vein access, absolute islet infusion volumes, and portal venous pressure changes during transfusion evaluated. IAT is considered a "last resort" when alternative approaches have been exhausted. Pre-morbid histology and prior surgical drainage adversely influence islet yields and may influence the clinical decision to perform pancreatectomy and IAT. Following pancreas digestion, absolute numbers of islets recovered and smaller islet size predict rates of insulin independence following IAT. Islet volumes and portal venous pressure changes are important factors for the development of complications. Surgical access for IAT includes intra-operative, immediate or delayed infusion via an "exteriorized" vein, and radiological percutaneous approaches. Delayed infusion can be combined with pancreas preservation techniques prior to islet isolation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The ISACA Business Model for Information Security: An Integrative and Innovative Approach

NASA Astrophysics Data System (ADS)

von Roessing, Rolf

In recent years, information security management has matured into a professional discipline that covers both technical and managerial aspects in an organisational environment. Information security is increasingly dependent on business-driven parameters and interfaces to a variety of organisational units and departments. In contrast, common security models and frameworks have remained largely technical. A review of extant models ranging from [LaBe73] to more recent models shows that technical aspects are covered in great detail, while the managerial aspects of security are often neglected.Likewise, the business view on organisational security is frequently at odds with the demands of information security personnel or information technology management. In practice, senior and executive level management remain comparatively distant from technical requirements. As a result, information security is generally regarded as a cost factor rather than a benefit to the organisation.

ICCS 2009 Technical Report

ERIC Educational Resources Information Center

Schulz, Wolfram, Ed.; Ainley, John, Ed.; Fraillon, Julian, Ed.

2011-01-01

This report is structured so as to provide technical detail about each aspect of International Civic and Citizenship Education Study (ICCS). The overview is followed by a series of chapters that provide detail about different aspects of ICCS. Chapters, 2, 3, 4, and 5 are concerned with the instruments. Chapter 2 provides information about the…

Proceedings of the Flat-Plate Solar Array Project Workshop on Crystal Gowth for High-Efficiency Silicon Solar Cells

NASA Technical Reports Server (NTRS)

Dumas, K. A. (Editor)

1985-01-01

A Workshop on Crystal Growth for High-Efficiency Silicon Solar Cells was held December 3 and 4, 1984, in San Diego, California. The Workshop offered a day and a half of technical presentations and discussions and an afternoon session that involved a panel discussion and general discussion of areas of research that are necessary to the development of materials for high-efficiency solar cells. Topics included the theoretical and experimental aspects of growing high-quality silicon crystals, the effects of growth-process-related defects on photovoltaic devices, and the suitability of various growth technologies as cost-effective processes. Fifteen invited papers were presented, with a discussion period following each presentation. The meeting was organized by the Flat-Plate Solar Array Project of the Jet Propulsion Laboratory. These Proceedings are a record of the presentations and discussions, edited for clarity and continuity.

Tribute to the contribution of Gerard Lallenment to structural dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Los Alamos National Laboratory

The Society for Experimental Mechanics and the International Modal Analysis Conference recognize the remarkable contribution to experimental mechanics, mechanical engineering and structural dynamics of Professor Gerard Lallement, from the University of Franche-Comte, France. A special session is organized during the IMAC-XX to outline the many achievements of Gerard Lallement in the fields of modal analysis, structural system identification, the theory and practice of structural modification, component mode synthesis and finite element model updating. The purpose of this publication is not to provide an exhaustive account of Gerard Lallement's contribution to structural dynamics. Numerous references are provided that should help themore » interested reader learn more about the many aspects of his work. Instead, the significance of this work is illustrated by discussing the role of structural dynamics in industrial applications and its future challenges. The technical aspects of Gerard Lallement's work are illustrated with a discussion of structural modification, modeling error localization and model updating.« less

A practical introduction to tensor networks: Matrix product states and projected entangled pair states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orús, Román, E-mail: roman.orus@uni-mainz.de

This is a partly non-technical introduction to selected topics on tensor network methods, based on several lectures and introductory seminars given on the subject. It should be a good place for newcomers to get familiarized with some of the key ideas in the field, specially regarding the numerics. After a very general introduction we motivate the concept of tensor network and provide several examples. We then move on to explain some basics about Matrix Product States (MPS) and Projected Entangled Pair States (PEPS). Selected details on some of the associated numerical methods for 1d and 2d quantum lattice systems aremore » also discussed. - Highlights: • A practical introduction to selected aspects of tensor network methods is presented. • We provide analytical examples of MPS and 2d PEPS. • We provide basic aspects on several numerical methods for MPS and 2d PEPS. • We discuss a number of applications of tensor network methods from a broad perspective.« less

In regulation we trust.

PubMed

Wiig, Siri; Tharaldsen, Jorunn Elise

2012-01-01

The role of trust has been argued to play an increasingly important role in modern, complex, and ambivalent risk societies. Trust within organizational research is anticipated to have a general strategic impact on aspects such as organizational performance, communication and knowledge exchange, and learning from accidents. Trust is also an important aspect related to regulation of risk. Diverse regulatory regimes, their contexts and risks influence regulators use of trust and distrust in regulatory practice. The aim of this paper is to discuss the relationship between risk regulation and trust across diverse risk regulation regimes. By drawing from studies of risk regulation, risk perception, and trust the purpose is to discuss how regulation and trust are linked and used in practice to control risk across system levels in socio-technical systems in high risk industries. This paper provides new knowledge on 1) how functional and dysfunctional trust and distrust are grounded in the empirical realities of high risk industries, 2) how different perspectives on trust and distrust act together and bring new knowledge on how society control risk.

Single molecule techniques in DNA repair: A primer

PubMed Central

Hughes, Craig D.; Simons, Michelle; Mackenzie, Cassidy E.; Van Houten, Bennett; Kad, Neil M.

2016-01-01

A powerful new approach has become much more widespread and offers insights into aspects of DNA repair unattainable with billions of molecules. Single molecule techniques can be used to image, manipulate or characterize the action of a single repair protein on a single strand of DNA. This allows search mechanisms to be probed, and the effects of force to be understood. These physical aspects can dominate a biochemical reaction, where at the ensemble level their nuances are obscured. In this paper we discuss some of the many technical advances that permit study at the single molecule level. We focus on DNA repair to which these techniques are actively being applied. DNA repair is also a process that encompasses so much of what single molecule studies benefit – searching for targets, complex formation, sequential biochemical reactions and substrate hand-off to name just a few. We discuss how single molecule biophysics is poised to transform our understanding of biological systems, in particular DNA repair. PMID:24819596

Management of outer space

NASA Astrophysics Data System (ADS)

Perek, Lubos

1993-10-01

Various aspects of space-environment management are discussed. Attention is called to the fact that, while space radio communications are already under an adequate management by the International Communications Union, the use of nuclear power sources is regulated by the recently adopted set of principles, and space debris will be discussed in the near future at the UN COPUOS, other aspects of management of outer space received little or no attention of the international community. These include the competency of crews and technical equipment of spacecraft launched by newcomers to space exploration; monitoring of locations and motions of space objects (now in national hands), with relevant data made accessible through a computer network; and the requirement to use space only for beneficial purposes and not for promoting narrow and debatable interests damaging the outer space environment and impeding on astronomical observations. It is suggested that some of these tasks would be best performed by an international space agency within the UN system of organizations.

First Li-Ion Battery On-Board A Russian Commercial Geo Satellite

NASA Astrophysics Data System (ADS)

Masgrangeas, David; Lagattu, Benoit; Nesterishin, Michael; Krenko, Alexander

2011-10-01

This paper deals with the first integration of a Li-ion battery from a western company aboard a Russian commercial GEO satellite. State of the art electrochemistry allied with innovative battery design lead to successful contract for development, manufacturing and delivery of flight hardware. After several months of joint technical work, two batteries were delivered for integration and tested inside a GEO spacecraft. Delivery conditions of a Li-ion battery were also part of the challenge and were successfully filled by both parties. This paper presents the first results of interfacing batteries and spacecraft. Mechanical, thermal and electrical aspects are discussed as well as learned lessons. Beyond cultural and technical habits and despite language barriers, this contract was a true success story between two major companies, each leading its own market share.

Ethical aspects of future health care: globalisation of markets and differentiation of societies - ethical challenges.

PubMed

Kluge, Eike-Henner W

2008-01-01

The shift in health care to an aggregate corporate and distributed model dominated by electronic methods of diagnosis, record-keeping and communication spanning jurisdictional boundaries raises technical, social and paradigmatic issues. The technical issues concern the material natures of the tools, devices, procedures and protocols; the social issues gravitate around abstract matters like individual rights and models of responsibility within a corporate setting and accountability in inter-jurisdictional contexts; the paradigmatic issues centre in the question of how the rights and duties of traditional and direct health care translate into the mediated context of the globally expanded corporate model of eHealth and telemedicine. The present discussion presents a brief overview of the issues and sketches some of their implications for the evolution of contemporary health care.

Introduction to System Health Engineering and Management in Aerospace

NASA Technical Reports Server (NTRS)

Johnson, Stephen B.

2005-01-01

This paper provides a technical overview of Integrated System Health Engineering and Management (ISHEM). We define ISHEM as "the paper provides a techniques, and technologies used to design, analyze, build, verify, and operate a system to prevent faults and/or minimize their effects." This includes design and manufacturing techniques as well operational and managerial methods. ISHEM is not a "purely technical issue" as it also involves and must account for organizational, communicative, and cognitive f&ms of humans as social beings and as individuals. Thus the paper will discuss in more detail why all of these elements, h m the technical to the cognitive and social, are necessary to build dependable human-machine systems. The paper outlines a functional homework and architecture for ISHEM operations, describes the processes needed to implement ISHEM in the system life-cycle, and provides a theoretical framework to understand the relationship between the different aspects of the discipline. It then derives from these and the social and cognitive bases a set of design and operational principles for ISHEM.

A Simulation of DNA Sequencing Utilizing 3M Post-It[R] Notes

ERIC Educational Resources Information Center

Christensen, Doug

2009-01-01

An inexpensive and equipment free approach to teaching the technical aspects of DNA sequencing. The activity described requires an instructor with a familiarity of DNA sequencing technology but provides a straight forward method of teaching the technical aspects of sequencing in the absence of expensive sequencing equipment. The final sequence…

General Circulation Model Output for Forest Climate Change Research and Applications

Treesearch

Ellen J. Cooter; Brian K. Eder; Sharon K. LeDuc; Lawrence Truppi

1993-01-01

This report reviews technical aspects of and summarizes output from four climate models. Recommendations concerning the use of these outputs in forest impact assessments are made. This report reviews technical aspects of and summarizes output from four climate models. Recommendations concerning the use of these outputs in forest impact assessments are made.

Technical and Non-Technical Programme Students' Attitudes and Reasons for Plagiarism

ERIC Educational Resources Information Center

Harji, Madhubala Bava; Ismail, Zalina; Chetty, Thiba Naraina; Letchumanan, Krishnaveni

2017-01-01

To date, plagiarism continues to be a widespread problem in higher education. Deemed to be endemic, researchers continue to examine various aspects of plagiarism, including students' perception, practices, attitudes and reasons for plagiarism, in addressing this growing concern. Most studies, however, tend to examine these aspects independently.…

Autonomy, evidence and intuition: nurses and decision-making.

PubMed

Traynor, Michael; Boland, Maggie; Buus, Niels

2010-07-01

This paper is a report of a study conducted to examine how nurses represent professional clinical decision-making processes, and to determine what light Jamous and Peloille's 'Indeterminacy/Technicality ratio' concept can shed on these representations. Classic definitions of professional work feature autonomy of decision-making and control over the field of work. Sociologists Jamous and Peloille have described professional work as being high in 'indeterminacy' (the use of tacit judgements) relative to technicality (activity able to be codified). The rise of the evidence-based practice movement has been seen as increasing the realm of technical decision-making in healthcare, and it is relevant to analyse nurses' professional discourse and study how they respond to this increase. Three focus groups with qualified nurses attending post-qualifying courses at a London university were held in 2008. Participants were asked to talk about influences on their decision-making. The discussions were tape-recorded, transcribed and subjected to discourse analysis. Participants described their decision-making as influenced by both indeterminate and technical features. They acknowledged useful influences from both domains, but pointed to their personal 'experience' as the final arbiter of decision-making. Their accounts of decision-making created a sense of professional autonomy while at the same time protecting it against external critique. Pre- and post-registration nurse education could encourage robust discussion of the definition and roles of 'irrational' aspects of decision-making and how these might be understood as components of credible professional practice.

Yesterday’s Doctors: The Human Aspects of Medical Education in Britain, 1957–93

PubMed Central

Bates, Victoria

2017-01-01

In the wake of the Second World War there was a movement to counterbalance the apparently increasingly technical nature of medical education. These reforms sought a more holistic model of care and to put people – rather than diseases – back at the centre of medical practice and medical education. This article shows that students often drove the early stages of education reform. Their innovations focused on relationships between doctors and their communities, and often took the form of informal discussions about medical ethics and the social dimensions of primary care. Medical schools began to pursue ‘humanistic’ education more formally from the 1980s onwards, particularly within the context of general practice curricula and with a focus on individual doctor–patient relationships. Overall from the 1950s to the 1990s there was a broad shift in discussions of the human aspects of medical education: from interest in patient communities to individuals; from social concerns to personal characteristics; and from the relatively abstract to the measurable and instrumental. There was no clear shift from ‘less’ to ‘more’ humanistic education, but rather a shift in the perceived goals of integrating human aspects of medical education. The human aspects of medicine show the importance of student activism in driving forward community and ethical medicine, and provide an important backdrop to the rise of competencies within general undergraduate education. PMID:27998331

Streamlining Software Aspects of Certification: Technical Team Report on the First Industry Workshop

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Holloway, C. Michael; Knight, John C.; Leveson, Nancy G.; Yang, Jeffrey C.; Dorsey, Cheryl A.; McCormick, G. Frank

1998-01-01

To address concerns about time and expense associated with software aspects of certification, the Federal Aviation Administration (FAA) began the Streamlining Software Aspects of Certification (SSAC) program. As part of this program, a Technical Team was established to determine whether the cost and time associated with certifying aircraft can be reduced while maintaining or improving safety, with the intent of impacting the FAA's Flight 2000 program. The Technical Team conducted a workshop to gain a better understanding of the major concerns in industry about software cost and schedule. Over 120 people attended the workshop, including representatives from the FAA,commercial transport and general aviation aircraft manufacturers and suppliers, and procurers and developers of non-airborne systems; and, more than 200 issues about software aspects of certification were recorded. This paper provides an overview of the SSAC program, motivation for the workshop, details of the workshop activities and outcomes, and recommendations for follow-on work.

Exploring the Art and Science of Systems Engineering

NASA Technical Reports Server (NTRS)

Jansma, P. A.

2012-01-01

There has been much discussion of late in the NASA systems engineering community about the fact that systems engineering cannot be just about process and technical disciplines. The belief is that there is both an art and science to systems engineering, and that both aspects are necessary for designing and implementing a successful system or mission. How does one go about differentiating between and characterizing these two aspects? Some say that the art of systems engineering is about designing systems that not only function well, but that are also elegant, beautiful and engaging. What does that mean? How can you tell when a system has been designed with that holistic "art" component? This paper attempts to answer these questions by exploring various ways of looking at the Art and Science of Systems Engineering.

Terraforming the Moon: a Viable Step in the Colonization of the Solar System?

NASA Astrophysics Data System (ADS)

Renn, H. W.

2002-01-01

One potential option for the colonization of other celestial bodies is Terraforming. The latter involves, as a first step, the creation of a breathable, artificial atmosphere. While terraforming other planets, especially Mars, has been under discussion for several decades, applying the same concept to Earth's closest neighbor, namely the Moon, plays virtually no role in existing plans for space colonization. This paper investigates the technical and economical feasibility of supplying the Moon with an artificial atmosphere. Based on existing concepts for life support systems, essential requirements for an artificial Lunar atmosphere are defined. Various alternatives for the atmospheric composition are investigated and the parameters of a preferred `reference atmosphere' are described in detail. In order to assess the latter's habitability, particularly with respect to wind speeds and temperature cycles, the Moon's wind system and temperature field are analyzed by using a customized climate simulation model. Aspects of technical feasibility are evaluated and major obstacles are identified. Finally, various assessment criteria with particular respect to economical and ethical considerations are discussed and preliminary conclusions are presented.

A journey into the technical evolution of neuroendoscopy.

PubMed

Di Ieva, Antonio; Tam, Mallorie; Tschabitscher, Manfred; Cusimano, Michael D

2014-12-01

Neuroendoscopy has become a well-accepted technique in neurosurgery. After the introduction of the endoscope in medical practice by Phillip Bozzini in 1806, influential individuals such as Harold Hopkins and Karl Storz paved the way for its current success. With the present pace of technologic advancements, great improvement in the instrumentation is expected along with the status of neuroendoscopy in the neurosurgical field. Specific attention is given to the history of the development of the endoscope, while also discussing more recent advances dating from 1990 onward. The importance of each development for the purpose of the instrument is explained. Gaps in the literature regarding the technical aspects of neuroendoscopy, including the optical physics in the endoscope, three-dimensional endoscopy, and clinical applications of neuroendoscopy and robotics, are addressed. Copyright © 2014 Elsevier Inc. All rights reserved.

Aptahistochemistry in diagnostic pathology: technical scrutiny and feasibility.

PubMed

Bukari, Bakhtiar A; Citartan, Marimuthu; Ch'ng, Ewe Seng; Bilibana, Mawethu P; Rozhdestvensky, Timofey; Tang, Thean-Hock

2017-05-01

Antibodies have been the workhorse for diagnostic immunohistochemistry to specifically interrogate the expression of certain protein to aid in histopathological diagnosis. This review introduces another dimension of histochemistry that employs aptamers as the core tool, the so-called aptahistochemistry. Aptamers are an emerging class of molecular recognition elements that could recapitulate the roles of antibodies. The many advantageous properties of aptamers suited for this diagnostic platform are scrutinized. An in-depth discussion on the technical aspects of aptahistochemistry is provided with close step-by-step comparison to the more familiarized immunohistochemical procedures, namely functionalization of the aptamer as a probe, antigen retrieval, optimization with emphasis on incubation parameters and visualization methods. This review offers rationales to overcome the anticipated challenges in transition from immunohistochemistry to aptahistochemistry, which is deemed feasible for an average diagnostic pathology laboratory.

Systems for deep brain stimulation: review of technical features.

PubMed

Amon, A; Alesch, F

2017-09-01

The use of deep brain stimulation (DBS) is an important treatment option for movement disorders and other medical conditions. Today, three major manufacturers provide implantable systems for DBS. Although the underlying principle is basically the same for all available systems, the differences in the technical features vary considerably. This article outlines aspects regarding the technical features of DBS systems. The differences between voltage and current sources are addressed and their effect on stimulation is shown. To maintain clinical benefit and minimize side effects the stimulation field has to be adapted to the requirements of the patient. Shaping of the stimulation field can be achieved by the electrode design and polarity configuration. Furthermore, the electric signal consisting of stimulation rate, stimulation amplitude and pulse width affect the stimulation field. Interleaving stimulation is an additional concept, which permits improved treatment outcomes. Therefore, the electrode design, the polarity, the electric signal, and the concept of interleaving stimulation are presented. The investigated systems can be also categorized as rechargeable and non-rechargeable, which is briefly discussed. Options for interconnecting different system components from various manufacturers are presented. The present paper summarizes the technical features and their combination possibilities, which can have a major impact on the therapeutic effect.

A Simple and Resource-efficient Setup for the Computer-aided Drug Design Laboratory.

PubMed

Moretti, Loris; Sartori, Luca

2016-10-01

Undertaking modelling investigations for Computer-Aided Drug Design (CADD) requires a proper environment. In principle, this could be done on a single computer, but the reality of a drug discovery program requires robustness and high-throughput computing (HTC) to efficiently support the research. Therefore, a more capable alternative is needed but its implementation has no widespread solution. Here, the realization of such a computing facility is discussed, from general layout to technical details all aspects are covered. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Report on the Workshop ''The First Year of Science with X-shooter''

NASA Astrophysics Data System (ADS)

Randich, S.; Covino, S.; Cristiani, S.

2011-03-01

The workshop was held with the aim of bringing together X-shooter users to discuss scientific results, performance and technical aspects, after the first year of successful operations of the instrument. The workshop was also organised to commemorate Roberto Pallavicini, whose scientific and human contribution to the development of X-shooter was invaluable and a source of continuous inspiration for all of us. A touching presentation focusing on the scientific personality of Roberto was given by Luca Pasquini on the second day of the workshop.

Subsonic aircraft: Evolution and the matching of size to performance

NASA Technical Reports Server (NTRS)

Loftin, L. K., Jr.

1980-01-01

Methods for estimating the approximate size, weight, and power of aircraft intended to meet specified performance requirements are presented for both jet-powered and propeller-driven aircraft. The methods are simple and require only the use of a pocket computer for rapid application to specific sizing problems. Application of the methods is illustrated by means of sizing studies of a series of jet-powered and propeller-driven aircraft with varying design constraints. Some aspects of the technical evolution of the airplane from 1918 to the present are also briefly discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, C.

Almost every computer architect dreams of achieving high system performance with low implementation costs. A multigauge machine can reconfigure its data-path width, provide parallelism, achieve better resource utilization, and sometimes can trade computational precision for increased speed. A simple experimental method is used here to capture the main characteristics of multigauging. The measurements indicate evidence of near-optimal speedups. Adapting these ideas in designing parallel processors incurs low costs and provides flexibility. Several operational aspects of designing a multigauge machine are discussed as well. Thus, this research reports the technical, economical, and operational feasibility studies of multigauging.

Review of nuclear pharmacy practice in hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawada, T.K.; Tubis, M.; Ebenkamp, T.

1982-02-01

An operational profile for nuclear pharmacy practice is presented, and the technical and professional role of nuclear pharmacists is reviewed. Key aspects of nuclear pharmacy practice in hospitals discussed are the basic facilities and equipment for the preparation, quality control, and distribution of radioactive drug products. Standards for receiving, storing, and processing radioactive material are described. The elements of a radiopharmaceutical quality assurance program, including the working procedures, documentation systems, data analysis, and specific control tests, are presented. Details of dose preparation and administration and systems of inventory control for radioactive products are outlined.

Diffusion-weighted imaging and demyelinating diseases: new aspects of an old advanced sequence.

PubMed

Rueda-Lopes, Fernanda C; Hygino da Cruz, Luiz C; Doring, Thomas M; Gasparetto, Emerson L

2014-01-01

The purpose of this article is to discuss classic applications in diffusion-weighted imaging (DWI) in demyelinating disease and progression of DWI in the near future. DWI is an advanced technique used in the follow-up of demyelinating disease patients, focusing on the diagnosis of a new lesion before contrast enhancement. With technical advances, diffusion-tensor imaging; new postprocessing techniques, such as tract-based spatial statistics; new ways of calculating diffusion, such as kurtosis; and new applications for DWI and its spectrum are about to arise.

Current status of matrix-assisted laser desorption ionisation-time of flight mass spectrometry in the clinical microbiology laboratory.

PubMed

Kok, Jen; Chen, Sharon C A; Dwyer, Dominic E; Iredell, Jonathan R

2013-01-01

The integration of matrix-assisted laser desorption ionisation-time of flight mass spectrometry (MALDI-TOF MS) into many clinical microbiology laboratories has revolutionised routine pathogen identification. MALDI-TOF MS complements and has good potential to replace existing phenotypic identification methods. Results are available in a more clinically relevant timeframe, particularly in bacteraemic septic shock. Novel applications include strain typing and the detection of antimicrobial resistance, but these are not widely used. This review discusses the technical aspects, current applications, and limitations of MALDI-TOF MS.

Deep space communication - Past, present, and future

NASA Technical Reports Server (NTRS)

Posner, E. C.; Stevens, R.

1984-01-01

This paper reviews the progress made in deep space communication from its beginnings until now, describes the development and applications of NASA's Deep Space Network, and indicates directions for the future. Limiting factors in deep space communication are examined using the upcoming Voyager encounter with Uranus, centered on the downlink telemetry from spacecraft to earth, as an example. A link calculation for Voyager at Uranus over Australia is exhibited. Seven basic deep space communication functions are discussed, and technical aspects of spacecraft communication equipment, ground antennas, and ground electronics and processing are considered.

Acoustic measurement study 40 by 80 foot subsonic wind tunnel

NASA Technical Reports Server (NTRS)

1974-01-01

An acoustical study conducted during the period from September 1, 1973 to April 30, 1974 measured sound pressure levels and vibration amplitudes inside and outside of the subsonic tunnel and on the tunnel structure. A discussion of the technical aspects of the study, the field measurement and data reduction procedures, and results are presentd, and conclusions resulting from the study which bear upon near field and far field tunnel noise, upon the tunnel as an acoustical enclosure, and upon the sources of noise within the tunnel drive system are given.

Privacy, confidentiality, and electronic medical records.

PubMed Central

Barrows, R C; Clayton, P D

1996-01-01

The enhanced availability of health information in an electronic format is strategic for industry-wide efforts to improve the quality and reduce the cost of health care, yet it brings a concomitant concern of greater risk for loss of privacy among health care participants. The authors review the conflicting goals of accessibility and security for electronic medical records and discuss nontechnical and technical aspects that constitute a reasonable security solution. It is argued that with guiding policy and current technology, an electronic medical record may offer better security than a traditional paper record. PMID:8653450

Wind Tunnel Wall Interference Assessment and Correction, 1983

NASA Technical Reports Server (NTRS)

Newman, P. A. (Editor); Barnwell, R. W. (Editor)

1984-01-01

Technical information focused upon emerging wall interference assessment/correction (WIAC) techniques applicable to transonic wind tunnels with conventional and passively or partially adapted walls is given. The possibility of improving the assessment and correction of data taken in conventional transonic wind tunnels by utilizing simultaneously obtained flow field data (generally taken near the walls) appears to offer a larger, nearer-term payoff than the fully adaptive wall concept. Development of WIAC procedures continues, and aspects related to validating the concept need to be addressed. Thus, the scope of wall interference topics discussed was somewhat limited.

Chronic peritoneal dialysis in children

PubMed Central

Fraser, Nia; Hussain, Farida K; Connell, Roy; Shenoy, Manoj U

2015-01-01

The incidence of end-stage renal disease in children is increasing. Peritoneal dialysis (PD) is the modality of choice in many European countries and is increasingly applied worldwide. PD enables children of all ages to be successfully treated while awaiting the ultimate goal of renal transplantation. The advantages of PD over other forms of renal replacement therapy are numerous, in particular the potential for the child to lead a relatively normal life. Indications for commencing PD, the rationale, preparation of family, technical aspects, and management of complications are discussed. PMID:26504404

The Future of the Space Age or how to Evaluate Innovative Ideas

NASA Astrophysics Data System (ADS)

Vollerthun, A.; Fricke, E.

2002-05-01

Based on an initiative of the German Aerospace Industry Association to foster a more transparent and structured funding of German commercial-oriented space projects a three-phased approach is suggested in this paper, to stepwise improve and evaluate proposed concepts for space-related innovations. The objective of this concept was to develop a transparent, structured, and reproducible process to select the right innovative project in terms of political, economical, and technical objectives for funding by e.g. a governmental agency. A stepwise process and related methods, that cover technical as well as economical aspects (and related sensitivities) are proposed. Based on the special needs and requirements of space industry the proposals are compared to a set of predefined top level objectives/requirements. Using an initial trades analysis with the criteria company, technology, product, and market, an initial business case is analyzed. The alternative innovative concepts are in the third process step subject to a very detailed analysis. The full economical and technical scale of the projects is evaluated and metrics for e.g. the 'Return on Investment' or 'Break Even Point' are determined, to compare the various innovations. Risks related to time, cost, and quality are considered, when performing sensitivity analysis by varying the most important factors of the project. Before discussing critical aspects of the proposed process, space-related examples will be presented to show how the process could be applied, and how different concepts should be evaluated.

78 FR 31976 - Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... DEPARTMENT OF LABOR Bureau of Labor Statistics Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda The Bureau of Labor Statistics Technical Advisory Committee will... Labor Statistics (BLS) on technical aspects of the collection and formulation of economic measures. The...

77 FR 27252 - Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... DEPARTMENT OF LABOR Bureau of Labor Statistics Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda The Bureau of Labor Statistics Technical Advisory Committee will... Labor Statistics (BLS) on technical aspects of the collection and formulation of economic measures. The...

Emergence of a Common Modeling Architecture for Earth System Science (Invited)

NASA Astrophysics Data System (ADS)

Deluca, C.

2010-12-01

Common modeling architecture can be viewed as a natural outcome of common modeling infrastructure. The development of model utility and coupling packages (ESMF, MCT, OpenMI, etc.) over the last decade represents the realization of a community vision for common model infrastructure. The adoption of these packages has led to increased technical communication among modeling centers and newly coupled modeling systems. However, adoption has also exposed aspects of interoperability that must be addressed before easy exchange of model components among different groups can be achieved. These aspects include common physical architecture (how a model is divided into components) and model metadata and usage conventions. The National Unified Operational Prediction Capability (NUOPC), an operational weather prediction consortium, is collaborating with weather and climate researchers to define a common model architecture that encompasses these advanced aspects of interoperability and looks to future needs. The nature and structure of the emergent common modeling architecture will be discussed along with its implications for future model development.

Advances in the development of remote sensing technology for agricultural applications

NASA Technical Reports Server (NTRS)

Powers, J. E.; Erb, R. B.; Hall, F. G.; Macdonald, R. B.

1979-01-01

The application of remote sensing technology to crop forecasting is discussed. The importance of crop forecasts to the world economy and agricultural management is explained, and the development of aerial and spaceborne remote sensing for global crop forecasting by the United States is outlined. The structure, goals and technical aspects of the Large Area Crop Inventory Experiment (LACIE) are presented, and main findings on the accuracy, efficiency, applicability and areas for further study of the LACIE procedure are reviewed. The current status of NASA crop forecasting activities in the United States and worldwide is discussed, and the objectives and organization of the newly created Agriculture and Resources Inventory Surveys through Aerospace Remote Sensing (AgRISTARS) program are presented.

Statistical approaches used to assess and redesign surface water-quality-monitoring networks.

PubMed

Khalil, B; Ouarda, T B M J

2009-11-01

An up-to-date review of the statistical approaches utilized for the assessment and redesign of surface water quality monitoring (WQM) networks is presented. The main technical aspects of network design are covered in four sections, addressing monitoring objectives, water quality variables, sampling frequency and spatial distribution of sampling locations. This paper discusses various monitoring objectives and related procedures used for the assessment and redesign of long-term surface WQM networks. The appropriateness of each approach for the design, contraction or expansion of monitoring networks is also discussed. For each statistical approach, its advantages and disadvantages are examined from a network design perspective. Possible methods to overcome disadvantages and deficiencies in the statistical approaches that are currently in use are recommended.

The Roles of Technical Communication Researchers in Design Scholarship

ERIC Educational Resources Information Center

Sánchez, Fernando

2017-01-01

Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

Manual Arts to Technology Education: Are We Ripe for Infusing Aspects of a Green Technology into Career and Technical Education Constituent Subjects?

ERIC Educational Resources Information Center

Asunda, Paul A.

2010-01-01

This paper is a conceptual essay that reviews industrial and economic changes that have shaped vocational education to present day Career and Technical Education (CTE) curriculum, and specifically the role of technology education in meeting societal needs. An argument is presented that CTE is ripe to integrate aspects of green technology and…

Renormalization and additional degrees of freedom within the chiral effective theory for spin-1 resonances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kampf, Karol; Institute of Particle and Nuclear Physics, Faculty of Mathematics and Physics, Charles University in Prague, V Holesovickach 2, 18000 Prague; Novotny, Jiri

2010-06-01

We study in detail various aspects of the renormalization of the spin-1 resonance propagator in the effective field theory framework. First, we briefly review the formalisms for the description of spin-1 resonances in the path integral formulation with the stress on the issue of propagating degrees of freedom. Then we calculate the one-loop 1{sup --} meson self-energy within the resonance chiral theory in the chiral limit using different methods for the description of spin-1 particles, namely, the Proca field, antisymmetric tensor field, and the first-order formalisms. We discuss in detail technical aspects of the renormalization procedure which are inherent tomore » the power-counting nonrenormalizable theory and give a formal prescription for the organization of both the counterterms and one-particle irreducible graphs. We also construct the corresponding propagators and investigate their properties. We show that the additional poles corresponding to the additional one-particle states are generated by loop corrections, some of which are negative norm ghosts or tachyons. We count the number of such additional poles and briefly discuss their physical meaning.« less

Development of the Updated Environmental Protection Agency Manual of Protective Action Guides (PAGS) and Protective Actions for Nuclear Incidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, L.M.

2008-07-01

As a student intern with the United States Environmental Protection Agency (EPA) Headquarters, the author was trained in the National Response Plan (NRP) and assisted in the editing of the new (unpublished) EPA Protective Action Guides (PAGs) [1] which has been revised in light of the perceived post 9/11 potential for 'Dirty Bomb' and 'Improvised Nuclear Device' attacks on civilian areas. Technical aspects and the public policy aspects of developing the new guides are discussed. Early Phase initial responses discussed include: Notification of state and/or local authorities, immediate evacuation/sheltering prior to release information or measurements, monitoring of releases and exposuremore » rate measurements, estimation of dose consequences, implementation of protective actions in other areas. The new PAG clarifies the use of 1992 PAGs [2] for incidents other than nuclear power plant accidents, lowers projected thyroid dose for potassium iodine (KI), provides drinking water guidance, includes guidance for long-term site restoration, and updates dosimetry from ICRP 26 to ICRP 60. (authors)« less

FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human-Animal Interface.

PubMed

Anderson, Tara; Capua, Ilaria; Dauphin, Gwenaëlle; Donis, Ruben; Fouchier, Ron; Mumford, Elizabeth; Peiris, Malik; Swayne, David; Thiermann, Alex

2010-05-01

For the past 10 years, animal health experts and human health experts have been gaining experience in the technical aspects of avian influenza in mostly separate fora. More recently, in 2006, in a meeting of the small WHO Working Group on Influenza Research at the Human Animal Interface (Meeting report available from: http://www.who.int/csr/resources/publications/influenza/WHO_CDS_EPR_GIP_2006_3/en/index.html) in Geneva allowed influenza experts from the animal and public health sectors to discuss together the most recent avian influenza research. Ad hoc bilateral discussions on specific technical issues as well as formal meetings such as the Technical Meeting on HPAI and Human H5N1 Infection (Rome, June, 2007; information available from: http://www.fao.org/avianflu/en/conferences/june2007/index.html) have increasingly brought the sectors together and broadened the understanding of the topics of concern to each sector. The sectors have also recently come together at the broad global level, and have developed a joint strategy document for working together on zoonotic diseases (Joint strategy available from: ftp://ftp.fao.org/docrep/fao/011/ajl37e/ajl37e00.pdf). The 2008 FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human Animal Interface described here was the first opportunity for a large group of influenza experts from the animal and public health sectors to gather and discuss purely technical topics of joint interest that exist at the human-animal interface. During the consultation, three influenza-specific sessions aimed to (1) identify virological characteristics of avian influenza viruses (AIVs) important for zoonotic and pandemic disease, (2) evaluate the factors affecting evolution and emergence of a pandemic influenza strain and identify existing monitoring systems, and (3) identify modes of transmission and exposure sources for human zoonotic influenza infection (including discussion of specific exposure risks by affected countries). A final session was held to discuss broadening the use of tools and systems to other emerging zoonotic diseases. The meeting was structured as short technical presentations with substantial time available for facilitated discussion, to take advantage of the vast influenza knowledge and experience available from the invited expert participants. Particularly important was the identification of gaps in knowledge that have not yet been filled by either sector. Technical discussions focused on H5N1, but included other potentially zoonotic avian and animal influenza viruses whenever possible. During the consultation, the significant threat posed by subtypes other than H5N1 was continually emphasized in a variety of contexts. It was stressed that epidemiological and virological surveillance for these other viruses should be broadening and strengthened. The important role of live bird markets (LBMs) in amplifying and sustaining AIVs in some countries was also a recurring topic, and the need for better understanding of the role of LBMs in human zoonotic exposure and infection was noted. Much is understood about the contribution of various virus mutations and gene combinations to transmissibility, infectivity, and pathogenicity, although it was agreed that the specific constellation of gene types and mutations that would characterize a potentially pandemic virus remains unclear. The question of why only certain humans have become infected with H5N1 in the face of massive exposure in some communities was frequently raised during discussion of human exposure risks. It was suggested that individual-level factors may play a role. More research is needed to address this as well as questions of mode of transmission, behaviors associated with increased risk, virological and ecological aspects, and viral persistence in the environment in order to better elucidate specific human exposure risks. It became clear that great strides have been made in recent years in collaboration between the animal health and public health sectors, especially at the global level. In some countries outbreaks of H5N1 are being investigated jointly. Even greater transparency, cooperation, and information and materials exchange would allow more timely and effective responses in emergency situations, as well as in assessment and planning phases. Ensuring sustainability was also frequently emphasized, e.g. in infrastructure and capacity development and in development of tools and systems for surveillance, assessment and response. It was suggested that one way for tools and systems built or planned to address avian influenza to become more sustainable would be to make them applicable for a broader array of existing and emerging zoonotic diseases.

Wearable cardioverter defibrillator: a life vest till the life boat (ICD) arrives.

PubMed

Francis, Johnson; Reek, Sven

2014-01-01

It is well established that implantable cardioverter defibrillator (ICD) is a life saving device ensuring protection against life threatening ventricular arrhythmias. But there are certain situations like a recent myocardial infarction where the standard guidelines do not recommend the implantation of an ICD while the patient can still be at a risk of demise due to a life threatening ventricular arrhythmia. There could also be a temporary indication for protection while explanting an infected ICD system. The wearable cardioverter defibrillator (WCD) is a device which comes to the rescue in such situations. In this brief review, we discuss the historical aspects of the development of a WCD, technical aspects as well as the clinical trial data and real world scenario of its use. Copyright © 2013 Cardiological Society of India. Published by Elsevier B.V. All rights reserved.

Opportunities and challenges associated with clinical diagnostic genome sequencing: a report of the Association for Molecular Pathology.

PubMed

Schrijver, Iris; Aziz, Nazneen; Farkas, Daniel H; Furtado, Manohar; Gonzalez, Andrea Ferreira; Greiner, Timothy C; Grody, Wayne W; Hambuch, Tina; Kalman, Lisa; Kant, Jeffrey A; Klein, Roger D; Leonard, Debra G B; Lubin, Ira M; Mao, Rong; Nagan, Narasimhan; Pratt, Victoria M; Sobel, Mark E; Voelkerding, Karl V; Gibson, Jane S

2012-11-01

This report of the Whole Genome Analysis group of the Association for Molecular Pathology illuminates the opportunities and challenges associated with clinical diagnostic genome sequencing. With the reality of clinical application of next-generation sequencing, technical aspects of molecular testing can be accomplished at greater speed and with higher volume, while much information is obtained. Although this testing is a next logical step for molecular pathology laboratories, the potential impact on the diagnostic process and clinical correlations is extraordinary and clinical interpretation will be challenging. We review the rapidly evolving technologies; provide application examples; discuss aspects of clinical utility, ethics, and consent; and address the analytic, postanalytic, and professional implications. Copyright © 2012 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Technical Aspects of Endobronchial Ultrasound-Guided Transbronchial Needle Aspiration: CHEST Guideline and Expert Panel Report.

PubMed

Wahidi, Momen M; Herth, Felix; Yasufuku, Kazuhiro; Shepherd, Ray Wesley; Yarmus, Lonny; Chawla, Mohit; Lamb, Carla; Casey, Kenneth R; Patel, Sheena; Silvestri, Gerard A; Feller-Kopman, David J

2016-03-01

Endobronchial ultrasound (EBUS) was introduced in the last decade, enabling real-time guidance of transbronchial needle aspiration (TBNA) of mediastinal and hilar structures and parabronchial lung masses. The many publications produced about EBUS-TBNA have led to a better understanding of the performance characteristics of this procedure. The goal of this document was to examine the current literature on the technical aspects of EBUS-TBNA as they relate to patient, technology, and proceduralist factors to provide evidence-based and expert guidance to clinicians. Rigorous methodology has been applied to provide a trustworthy evidence-based guideline and expert panel report. A group of approved panelists developed key clinical questions by using the PICO (population, intervention, comparator, and outcome) format that addressed specific topics on the technical aspects of EBUS-TBNA. MEDLINE (via PubMed) and the Cochrane Library were systematically searched for relevant literature, which was supplemented by manual searches. References were screened for inclusion, and well-recognized document evaluation tools were used to assess the quality of included studies, to extract meaningful data, and to grade the level of evidence to support each recommendation or suggestion. Our systematic review and critical analysis of the literature on 15 PICO questions related to the technical aspects of EBUS-TBNA resulted in 12 statements: 7 evidence-based graded recommendations and 5 ungraded consensus-based statements. Three questions did not have sufficient evidence to generate a statement. Evidence on the technical aspects of EBUS-TBNA varies in strength but is satisfactory in certain areas to guide clinicians on the best conditions to perform EBUS-guided tissue sampling. Additional research is needed to enhance our knowledge regarding the optimal performance of this effective procedure. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

PubMed

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

A review of design issues specific to hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Sziroczak, D.; Smith, H.

2016-07-01

This paper provides an overview of the current technical issues and challenges associated with the design of hypersonic vehicles. Two distinct classes of vehicles are reviewed; Hypersonic Transports and Space Launchers, their common features and differences are examined. After a brief historical overview, the paper takes a multi-disciplinary approach to these vehicles, discusses various design aspects, and technical challenges. Operational issues are explored, including mission profiles, current and predicted markets, in addition to environmental effects and human factors. Technological issues are also reviewed, focusing on the three major challenge areas associated with these vehicles: aerothermodynamics, propulsion, and structures. In addition, matters of reliability and maintainability are also presented. The paper also reviews the certification and flight testing of these vehicles from a global perspective. Finally the current stakeholders in the field of hypersonic flight are presented, summarizing the active programs and promising concepts.

Low frequency VLBI in space using GAS-Can satellites: Report on the May 1987 JPL Workshop

NASA Technical Reports Server (NTRS)

Mahoney, M. J.; Jones, D. L.; Kuiper, T. B. H.; Preston, R. A.

1987-01-01

Summarized are the results of a workshop held at JPL on May 28 and 29, 1987, to study the feasibility of using small, very inexpensive spacecraft for a low-frequency radio interferometer array. Many technical aspects of a mission to produce high angular resolution images of the entire sky at frequencies from 2 to 20 MHz were discussed. The workshop conclusion was that such a mission was scientifically valuable and technically practical. A useful array could be based on six or more satellites no larger than those launched from Get-Away-Special canisters. The cost of each satellite could be $1-2M, and the mass less than 90 kg. Many details require further study, but as this report shows, there is good reason to proceed. No fundamental problems have been discovered involving the use of untraditional, very inexpensive spacecraft for this type of mission.

Technical issues of a high-Tc superconducting bulk magnet

NASA Astrophysics Data System (ADS)

Fujimoto, Hiroyuki

2000-06-01

Superconducting magnets made of high-Tc superconductors are promising for industrial applications. It is well known that REBa2Cu3O7-x superconductors prepared by melt processes have a high critical current density, Jc, at 77 K and high magnetic fields. The materials are very promising for high magnetic field applications as a superconducting permanent/bulk magnet with liquid-nitrogen refrigeration. Light rare-earth (LRE) BaCuO bulks, compared with REBaCuO bulks, exhibit a larger Jc in high magnetic fields and a much improved irreversibility field, Hirr, at 77 K. In this study, we discuss technical issues of a high-Tc superconducting bulk magnet, namely the aspects of the melt processing for bulk superconductors, their characteristic superconducting properties and mechanical properties, and trapped field properties of a superconducting bulk magnet. One of the possible applications is a superconducting bulk magnet for the magnetically levitated (Maglev) train in the future.

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

Catalogue of Risks: Natural, Technical, Social and Health Risks

NASA Astrophysics Data System (ADS)

Ebi, Kristie L.

2009-01-01

Financial, geophysical, and terrorist-related disasters have been headline news in the past few months. As amply demonstrated on a regular basis, the recognition and evaluation of risks are skills that could be more widespread. As such, Proske's Catalogue of Risks is timely and of potential interest. The book is a revised and expanded version of an earlier German publication that aims to provide an encyclopedic discussion of issues related to risks and disasters, with a goal of facilitating an understanding of the components and assessment of risk. The book includes chapters that discuss the difficulty of coming to a consensus on a definition of risk, a comprehensive range of risks and disasters, objective risk measures, subjective risk judgment, quality of life measures, and legal aspects of risk. The book ends with an example of applying the concepts discussed to ship impacts against bridges.

Security analysis for biometric data in ID documents

NASA Astrophysics Data System (ADS)

Schimke, Sascha; Kiltz, Stefan; Vielhauer, Claus; Kalker, Ton

2005-03-01

In this paper we analyze chances and challenges with respect to the security of using biometrics in ID documents. We identify goals for ID documents, set by national and international authorities, and discuss the degree of security, which is obtainable with the inclusion of biometric into documents like passports. Starting from classical techniques for manual authentication of ID card holders, we expand our view towards automatic methods based on biometrics. We do so by reviewing different human biometric attributes by modality, as well as by discussing possible techniques for storing and handling the particular biometric data on the document. Further, we explore possible vulnerabilities of potential biometric passport systems. Based on the findings of that discussion we will expand upon two exemplary approaches for including digital biometric data in the context of ID documents and present potential risks attack scenarios along with technical aspects such as capacity and robustness.

Technical aspects and recommendations for single-cell qPCR.

PubMed

Ståhlberg, Anders; Kubista, Mikael

2018-02-01

Single cells are basic physiological and biological units that can function individually as well as in groups in tissues and organs. It is central to identify, characterize and profile single cells at molecular level to be able to distinguish different kinds, to understand their functions and determine how they interact with each other. During the last decade several technologies for single-cell profiling have been developed and used in various applications, revealing many novel findings. Quantitative PCR (qPCR) is one of the most developed methods for single-cell profiling that can be used to interrogate several analytes, including DNA, RNA and protein. Single-cell qPCR has the potential to become routine methodology but the technique is still challenging, as it involves several experimental steps and few molecules are handled. Here, we discuss technical aspects and provide recommendation for single-cell qPCR analysis. The workflow includes experimental design, sample preparation, single-cell collection, direct lysis, reverse transcription, preamplification, qPCR and data analysis. Detailed reporting and sharing of experimental details and data will promote further development and make validation studies possible. Efforts aiming to standardize single-cell qPCR open up means to move single-cell analysis from specialized research settings to standard research laboratories. Copyright © 2017 Elsevier Ltd. All rights reserved.

["In-situ split" (ISS) liver resection: new aspects of technique and indication].

PubMed

Lang, S A; Loss, M; Schlitt, H J

2014-04-01

The combination of right portal vein ligation with complete parenchyma dissection ("in-situ split", ISS) for rapid hypertrophy induction of the left-lateral liver lobe is a novel strategy to convert primarily irresectable liver tumours into a resectable stage. Available data so far show a 60-80 % growth induction of the remnant liver within 7(- 9) days. Certainly, a novel concept that comprises two operations within a very short time period raises questions. Based on the very few literature reports that have been published so far, as well as our own experience, we here discuss technical issues such as the use of a plastic sheet on the resection margin, the possibility of laparoscopic dissection and the timing of the second operation. Moreover, aspects of the preoperative diagnostic work-up that is necessary are assessed. Finally, open questions, e.g., concerning the influence of preoperative chemotherapy and the use of ISS in patients with cirrhosis are evaluated. In summary, the assessment of chances and risks of this novel concept with regard to indication and technical issues helps to provide the potentially curative option of the "in-situ split" procedure to more patients with marginal or even irresectable liver tumours. Georg Thieme Verlag KG Stuttgart · New York.

Pipeline transportation of upgraded Yugoslavian lignite fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ljubicic, B.; Anderson, C.; Bukurov, Z.

1993-12-31

Hydraulic transport and handling procedures for coal are not widely used, but when practiced, they result in a technically and economically successful operation. Potentially the most attractive way to utilize lignitic coals for power generation would be to combine hydraulic mining techniques with aqueous ash removal, hydrothermal processing, solids concentration, and coal-water fuel (CWF) combustion. Technical and economic assessment of this operation is being implemented within the Yugoslavian-American Scientific Technical Cooperation Agreement. The Energy and Environmental Research Center (EERC), Grand Forks, North Dakota, with support from the U.S. Department of Energy, has entered into a jointly sponsored research project withmore » Electric Power of Serbia (EPS), Belgrade, Yugoslavia, to investigate the application of the nonevaporative hydrothermal drying procedure, commonly called hot-water drying (HWD), developed at the EERC, to the lignite from the Kovin deposit. Advances in hydrothermal treatment of low-rank coals (LRCs) at the EERC have enabled cheaper, more reactive LRCs to be used in coal-water fuels (CWFs). HWD is a high-temperature, nonevaporative drying technique carried out at high pressure in water that permanently alters the structure of LRC. It solves the stability problems by producing a safe, easily transported, liquid fuel that can be handled and used like oil. For continued or increased success, it is necessary to evaluate carefully all aspects of slurry technology that permit further optimization. This paper discusses some aspects of low-rank coal hydraulic transport combined with hydrothermal treatment as an alternative energy solution toward less oil dependence in Yugoslavia.« less

Endovascular Approach for Management of Bullet Embolization to the Heart.

PubMed

Mojtahedi, Alireza; Contractor, Sohail; Kisza, Piotr S

2018-05-01

Bullet embolization to the right heart through the vasculature is seen infrequently in cases presenting with penetrating trauma. Patients with unstable hemodynamic status are managed operatively. For a patient with stable hemodynamic parameters, diagnostic evaluation such as computed tomography angiogram, echocardiogram, or angiography could be performed to select the best treatment option. Endovascular treatment is employed infrequently in these cases but can be a viable option for select patients. We present a case of a bullet embolus to the right ventricle treated successfully with endovascular approach and discuss the technical aspects of this approach.

Botulinum toxin (BoNT) and back pain.

PubMed

Porta, Mauro; Maggioni, G

2004-02-01

Myofascial pain syndrome is defined as subacute or chronic pain with sensory, motor and autonomic symptoms referred from active trigger points with associated painful dysfunctions. Authors present the usefulness of botulinum toxin A or B (BoNT/A or BoNT/B) injected into target muscles since the toxin is capable of controlling not only the muscular spasm but mostly the pain by alternative mechanisms of action, which are discussed. Posology of BoNT, technical aspects and results are presented. BoNT represents an interesting and useful tool for an adequate management of patients with myofascial pain.

Development of Droplet Microfluidics Enabling High-Throughput Single-Cell Analysis.

PubMed

Wen, Na; Zhao, Zhan; Fan, Beiyuan; Chen, Deyong; Men, Dong; Wang, Junbo; Chen, Jian

2016-07-05

This article reviews recent developments in droplet microfluidics enabling high-throughput single-cell analysis. Five key aspects in this field are included in this review: (1) prototype demonstration of single-cell encapsulation in microfluidic droplets; (2) technical improvements of single-cell encapsulation in microfluidic droplets; (3) microfluidic droplets enabling single-cell proteomic analysis; (4) microfluidic droplets enabling single-cell genomic analysis; and (5) integrated microfluidic droplet systems enabling single-cell screening. We examine the advantages and limitations of each technique and discuss future research opportunities by focusing on key performances of throughput, multifunctionality, and absolute quantification.

77 FR 36273 - Public Meeting on Draft Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

...The Environmental Protection Agency (EPA or agency) is announcing a public meeting to discuss draft permitting guidance the agency has developed on the use of diesel fuels in oil and gas hydraulic fracturing and to solicit input during the public comment period. The meeting is open to all interested parties. The agency requests input on the following technical aspects of the draft permitting guidance: Diesel fuels description; diesel fuels usage information; permit duration and well closure; area of review; information submitted with the permit application; and monitoring.

Criteria for site selection and frequency allocation (keynote paper), part 5

NASA Technical Reports Server (NTRS)

Rottger, J.

1985-01-01

Technical aspects of mesosphere-stratosphere-troposphere (MST) Radar on site and frequency selection were discussed. Recommendations on site selections are presented. Tests of interference will be conducted before selecting a site. A small directional antenna may be suitable to simulate sidelobe sensitivity of radars however, sophisticated data-processing methods make system sensitivity extremely good. The use of the complete data system to look for interference is recommended. There is the difficulty of allocation of frequencies -- almost continuous use by these radars will be made when the band 40 to 60 MHz is allocated to other services.

Recycling wastewater after hemodialysis: an environmental analysis for alternative water sources in arid regions.

PubMed

Tarrass, Faissal; Benjelloun, Meryem; Benjelloun, Omar

2008-07-01

Water is a vital aspect of hemodialysis. During the procedure, large volumes of water are used to prepare dialysate and clean and reprocess machines. This report evaluates the technical and economic feasibility of recycling hemodialysis wastewater for irrigation uses, such as watering gardens and landscape plantings. Water characteristics, possible recycling methods, and production costs of treated water are discussed in terms of the quality of the generated wastewater. A cost-benefit analysis is also performed through comparison of intended cost with that of seawater desalination, which is widely used in irrigation.

[Ethics of research in psychiatry. Comparison of France and the United States].

PubMed

Lemoine, P; Pacault-Legendre, V

1983-01-01

This article presents a comparison of research ethics in psychopharmacology in France and the United States. The authors present some elements of definition, etymology and of history. In addition, they study how this very specific research is actually done. Many questions are discussed, including the right of the patient, and the problem of normal volunteers. Other aspects are more technical i.e. remuneration, protocol, and the product. Finally the role of the ethics committees is investigated. These committees comprise the third component of the trial that consists of the research and the subject.

Outline of cost-benefit analysis and a case study

NASA Technical Reports Server (NTRS)

Kellizy, A.

1978-01-01

The methodology of cost-benefit analysis is reviewed and a case study involving solar cell technology is presented. Emphasis is placed on simplifying the technique in order to permit a technical person not trained in economics to undertake a cost-benefit study comparing alternative approaches to a given problem. The role of economic analysis in management decision making is discussed. In simplifying the methodology it was necessary to restrict the scope and applicability of this report. Additional considerations and constraints are outlined. Examples are worked out to demonstrate the principles. A computer program which performs the computational aspects appears in the appendix.

Pacific Educational Computer Network Study. Final Report.

ERIC Educational Resources Information Center

Hawaii Univ., Honolulu. ALOHA System.

The Pacific Educational Computer Network Feasibility Study examined technical and non-technical aspects of the formation of an international Pacific Area computer network for higher education. The technical study covered the assessment of the feasibility of a packet-switched satellite and radio ground distribution network for data transmission…

CHILI – the Chicago Instrument for Laser Ionization – a new tool for isotope measurements in cosmochemistry

DOE PAGES

Stephan, Thomas; Trappitsch, Reto; Davis, Andrew M.; ...

2016-06-17

Here, we describe CHILI, the Chicago Instrument for Laser Ionization, a new resonance ionization mass spectrometer developed for isotopic analysis at high spatial resolution and high sensitivity of small samples like contemporary interstellar dust grains returned by the Stardust spacecraft. We explain how CHILI addresses the technical challenges associated with such analyses by pushing most technical specifications towards their physical limits. As an initial demonstration, after many years of designing and developing CHILI, we have analyzed presolar silicon carbide grains for their isotopic compositions of strontium, zirconium, and barium. Subsequently, after further technical improvements, we have used CHILI to analyze,more » for the first time without interference, all stable isotopes of iron and nickel simultaneously in presolar silicon carbide grains. With a special timing scheme for the ionization lasers, we separated iron and nickel isotopes in the time-of-flight spectrum such that the isobaric interference between 58Fe and 58Ni was resolved. In-depth discussion of the astrophysical implications of the presolar grain results is deferred to dedicated later publications. Here we focus on the technical aspects of CHILI, its status quo, and further developments necessary to achieve CHILI’s ultimate goals, 10 nm lateral resolution and 30–40% useful yield.« less

CHILI – the Chicago Instrument for Laser Ionization – a new tool for isotope measurements in cosmochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephan, Thomas; Trappitsch, Reto; Davis, Andrew M.

2016-08-01

We describe CHILI, the Chicago Instrument for Laser Ionization, a new resonance ionization mass spectrometer developed for isotopic analysis at high spatial resolution and high sensitivity of small samples like contemporary interstellar dust grains returned by the Stardust spacecraft. We explain how CHILI addresses the technical challenges associated with such analyses by pushing most technical specifications towards their physical limits. As an initial demonstration, after many years of designing and developing CHILI, we have analyzed presolar silicon carbide grains for their isotopic compositions of strontium, zirconium, and barium. Subsequently, after further technical improvements, we have used CHILI to analyze, formore » the first time without interference, all stable isotopes of iron and nickel simultaneously in presolar silicon carbide grains. With a special timing scheme for the ionization lasers, we separated iron and nickel isotopes in the time-of-flight spectrum such that the isobaric interference between Fe-58 and Ni-58 was resolved. In-depth discussion of the astrophysical implications of the presolar grain results is deferred to dedicated later publications. Here we focus on the technical aspects of CHILI, its status quo, and further developments necessary to achieve CHILI's ultimate goals, similar to 10 nm lateral resolution and 30-40% useful yield.« less

Aberrations and adaptive optics in super-resolution microscopy

PubMed Central

Booth, Martin; Andrade, Débora; Burke, Daniel; Patton, Brian; Zurauskas, Mantas

2015-01-01

As one of the most powerful tools in the biological investigation of cellular structures and dynamic processes, fluorescence microscopy has undergone extraordinary developments in the past decades. The advent of super-resolution techniques has enabled fluorescence microscopy – or rather nanoscopy – to achieve nanoscale resolution in living specimens and unravelled the interior of cells with unprecedented detail. The methods employed in this expanding field of microscopy, however, are especially prone to the detrimental effects of optical aberrations. In this review, we discuss how super-resolution microscopy techniques based upon single-molecule switching, stimulated emission depletion and structured illumination each suffer from aberrations in different ways that are dependent upon intrinsic technical aspects. We discuss the use of adaptive optics as an effective means to overcome this problem. PMID:26124194

Looking Back, Moving Forward: Technical, Normative, and Political Dimensions of School Discipline

ERIC Educational Resources Information Center

Wiley, Kathryn E.; Anyon, Yolanda; Yang, Jessica L.; Pauline, Malina E.; Rosch, Alyssa; Valladares, Giovana; Downing, Barbara J.; Pisciotta, Lisa

2018-01-01

Purpose: School discipline reformers have presumed that such work is largely a technical task, emphasizing discrete changes to discipline policies and protocols. Yet prior theory and research suggest that emphasizing technical changes may overlook additional and important aspects of reform, namely, the normative and political dimensions within…

Cell attachment properties of Portland cement-based endodontic materials: biological and methodological considerations.

PubMed

Ahmed, Hany Mohamed Aly; Luddin, Norhayati; Kannan, Thirumulu Ponnuraj; Mokhtar, Khairani Idah; Ahmad, Azlina

2014-10-01

The attachment and spreading of mammalian cells on endodontic biomaterials are an area of active research. The purpose of this review is to discuss the cell attachment properties of Portland cement (PC)-based materials by using scanning electron microscope (SEM). In addition, methodological aspects and technical challenges are discussed. A PubMed electronic search was conducted by using appropriate key words to identify the available investigations on the cell attachment properties of PC-based endodontic materials. After retrieving the full text of related articles, the cross citations were also identified. A total of 23 articles published between January 1993 and October 2013 were identified. This review summarizes the cell attachment properties of commercial and experimental PC-based materials on different cell cultures by using SEM. Methodological procedures, technical challenges, and relevance of SEM in determining the biological profile of PC-based materials are discussed. SEM observations demonstrate that commercial MTA formulations show favorable cell attachment properties, which is consistent with their successful clinical outcomes. The favorable cell attachment properties of PC and its modified formulations support its potential use as a substitute for mineral trioxide aggregate. However, researchers should carefully select cell types for their SEM investigations that would be in contact with the proposed PC-based combinations in the clinical situation. Despite being a technical challenge, SEM provides useful information on the cell attachment properties of PC-based materials; however, other assays for cell proliferation and viability are essential to come up with an accurate in vitro biological profile of any given PC-based formulation. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Operational and design aspects of accelerators for medical applications

NASA Astrophysics Data System (ADS)

Schippers, Jacobus Maarten; Seidel, Mike

2015-03-01

Originally, the typical particle accelerators as well as their associated beam transport equipment were designed for particle and nuclear physics research and applications in isotope production. In the past few decades, such accelerators and related equipment have also been applied for medical use. This can be in the original physics laboratory environment, but for the past 20 years also in hospital-based or purely clinical environments for particle therapy. The most important specific requirements of accelerators for radiation therapy with protons or ions will be discussed. The focus will be on accelerator design, operational, and formal aspects. We will discuss the special requirements to reach a high reliability for patient treatments as well as an accurate delivery of the dose at the correct position in the patient using modern techniques like pencil beam scanning. It will be shown that the technical requirements, safety aspects, and required reliability of the accelerated beam differ substantially from those in a nuclear physics laboratory. It will be shown that this difference has significant implications on the safety and interlock systems. The operation of such a medical facility should be possible by nonaccelerator specialists at different operating sites (treatment rooms). The organization and role of the control and interlock systems can be considered as being the most crucially important issue, and therefore a special, dedicated design is absolutely necessary in a facility providing particle therapy.

NASA Aerospace Flight Battery Program: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries; Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries; Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop). Volume 2, Part 1

NASA Technical Reports Server (NTRS)

Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This report contains the Appendices to the findings from the first year of the program's operations.

Surface-micromachined and high-aspect ratio electrostatic actuators for aeronautic and space applications: design and lifetime considerations

NASA Astrophysics Data System (ADS)

Vescovo, P.; Joseph, E.; Bourbon, G.; Le Moal, P.; Minotti, P.; Hibert, C.; Pont, G.

2003-09-01

This paper focuses on recent advances in the field of MEMS-based actuators and distributed microelectromechanical systems (MEMS). IC-processed actuators (e.g. actuators that are machined using integrated circuit batch processes) are expected to open a wide range of industrial applications on the near term. The most promising investigations deal with high-aspect ratio electric field driven microactuators suitable for use in numerous technical fields such as aeronautics and space industry. Because the silicon micromachining technology have the potential to integrate both mechanical components and control circuits within a single process, MEMS-based active control of microscopic and macroscopic structures appears to be one of the most promising challenges for the next decade. As a first step towards new generations of MEMS-based smart structures, recent investigations dealing with silicon mechanisms involving MEMS-based actuators are briefly discussed in this paper.

GLOBECOM '84 - Global Telecommunications Conference, Atlanta, GA, November 26-29, 1984, Conference Record. Volume 1

NASA Astrophysics Data System (ADS)

The subjects discussed are related to LSI/VLSI based subscriber transmission and customer access for the Integrated Services Digital Network (ISDN), special applications of fiber optics, ISDN and competitive telecommunication services, technical preparations for the Geostationary-Satellite Orbit Conference, high-capacity statistical switching fabrics, networking and distributed systems software, adaptive arrays and cancelers, synchronization and tracking, speech processing, advances in communication terminals, full-color videotex, and a performance analysis of protocols. Advances in data communications are considered along with transmission network plans and progress, direct broadcast satellite systems, packet radio system aspects, radio-new and developing technologies and applications, the management of software quality, and Open Systems Interconnection (OSI) aspects of telematic services. Attention is given to personal computers and OSI, the role of software reliability measurement in information systems, and an active array antenna for the next-generation direct broadcast satellite.

48 CFR 3419.870 - Acquisition of technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... competition to submit written technical proposals. Otherwise, ED holds oral discussions with the participating... participating in a limited technical competition based on the written technical proposals or oral discussions... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Acquisition of technical...

ECSIN's methodological approach for hazard evaluation of engineered nanomaterials

NASA Astrophysics Data System (ADS)

Bregoli, Lisa; Benetti, Federico; Venturini, Marco; Sabbioni, Enrico

2013-04-01

The increasing production volumes and commercialization of engineered nanomaterials (ENM), together with data on their higher biological reactivity when compared to bulk counterpart and ability to cross biological barriers, have caused concerns about their potential impacts on the health and safety of both humans and the environment. A multidisciplinary component of the scientific community has been called to evaluate the real risks associated with the use of products containing ENM, and is today in the process of developing specific definitions and testing strategies for nanomaterials. At ECSIN we are developing an integrated multidisciplinary methodological approach for the evaluation of the biological effects of ENM on the environment and human health. While our testing strategy agrees with the most widely advanced line of work at the European level, the choice of methods and optimization of protocols is made with an extended treatment of details. Our attention to the methodological and technical details is based on the acknowledgment that the innovative characteristics of matter at the nano-size range may influence the existing testing methods in a partially unpredictable manner, an aspect which is frequently recognized at the discussion level but oftentimes disregarded at the laboratory bench level. This work outlines the most important steps of our testing approach. In particular, each step will be briefly discussed in terms of potential technical and methodological pitfalls that we have encountered, and which are often ignored in nanotoxicology research. The final aim is to draw attention to the need of preliminary studies in developing reliable tests, a crucial aspect to confirm the suitability of the chosen analytical and toxicological methods to be used for the specific tested nanoparticle, and to express the idea that in nanotoxicology,"devil is in the detail".

[Bioethical analysis of the Brazilian Dentistry Code of Ethics].

PubMed

Pyrrho, Monique; do Prado, Mauro Machado; Cordón, Jorge; Garrafa, Volnei

2009-01-01

The Brazilian Dentistry Code of Ethics (DCE), Resolution CFO-71 from May 2006, is an instrument created to guide dentists' behavior in relation to the ethical aspects of professional practice. The purpose of the study is to analyze the above mentioned code comparing the deontological and bioethical focuses. In order to do so, an interpretative analysis of the code and of twelve selected texts was made. Six of the texts were about bioethics and six on deontology, and the analysis was made through the methodological classification of the context units, textual paragraphs and items from the code in the following categories: the referentials of bioethical principlism--autonomy, beneficence, nonmaleficence and justice -, technical aspects and moral virtues related to the profession. Together the four principles represented 22.9%, 39.8% and 54.2% of the content of the DCE, of the deontological texts and of the bioethical texts respectively. In the DCE, 42% of the items referred to virtues, 40.2% were associated to technical aspects and just 22.9% referred to principles. The virtues related to the professionals and the technical aspects together amounted to 70.1% of the code. Instead of focusing on the patient as the subject of the process of oral health care, the DCE focuses on the professional, and it is predominantly turned to legalistic and corporate aspects.

Introduction to Technical Services. Seventh Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Evans, G. Edward; Intner, Sheila S.; Weihs, Jean

This updated edition covers all aspects of library technical services--from acquisitions to managing the cataloging department--with new emphasis on automation as it affects technical services work and those skills that can be developed through work experience or classroom instruction. Part One, General Background, consists of four chapters that…

[Home hemodialysis: the technical overview. A 2010 survey].

PubMed

Ponson, Laurent; Arkouche, Walid; Laville, Maurice

2012-04-01

Compared to the daily work in dialysis units, home haemodialysis represents a particular task for the technical services of healthcare facilities. This survey concerns this modality of treatment of end-stage chronic renal failure, and was led to three objectives: to make a snapshot of the practices done by the technical staff, to point out significant differences, and to identify common issues. This is also an opportunity to discuss about the future of this treatment. Numbers of registries show a continuous decline of home haemodialysis during past decades. This could be explained by many factors, but on the other hand several points tend to forecast a renewed interest for this method of treatment. A questionnaire was sent to every technical service of health organizations dispensing dialysis in France. Seventeen health facilities providing home haemodialysis have sent back their information, representing 238 patients, that to say almost the totality of the patients of the country. These data were analysed, relevant indicators were sorted out, so that initial objectives could be completed. The results are explained as follows: site activities, procedures before and during patient installation, equipment, preventive visits, and corrective maintenance. In lack of a precise regulation on the technical support of these patients, significant differences of operations were noted and are detailed, as well as several common difficulties. All these elements can be used as a basis for the development of a practical guide intended to technical services. This work is voluntarily centered on the technical aspects, but other levers exist to revitalize this method. Copyright © 2012 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Technical review of the da Vinci surgical telemanipulator.

PubMed

Freschi, C; Ferrari, V; Melfi, F; Ferrari, M; Mosca, F; Cuschieri, A

2013-12-01

The da Vinci robotic surgical telemanipulator has been utilized in several surgical specialties for varied procedures, and the users' experiences have been widely published. To date, no detailed system technical analyses have been performed. A detailed review was performed of all publications and patents about the technical aspects of the da Vinci robotic system. Published technical literature on the da Vinci system highlight strengths and weaknesses of the robot design. While the system facilitates complex surgical operations and has a low malfunction rate, the lack of haptic (especially tactile) feedback and collisions between the robotic arms remain the major limitations of the system. Accurate, preplanned positioning of access ports is essential. Knowledge of the technical aspects of the da Vinci robot is important for optimal use. We confirmed the excellent system functionality and ease of use for surgeons without an engineering background. Research and development of the surgical robot has been predominant in the literature. Future trends address robot miniaturization and intelligent control design. Copyright © 2012 John Wiley & Sons, Ltd.

Model of urban water management towards water sensitive city: a literature review

NASA Astrophysics Data System (ADS)

Maftuhah, D. I.; Anityasari, M.; Sholihah, M.

2018-04-01

Nowadays, many cities are facing with complex issues such as climate change, social, economic, culture, and environmental problems, especially urban water. In other words, the city has to struggle with the challenge to make sure its sustainability in all aspects. This research focuses on how to ensure the city sustainability and resilience on urban water management. Many research were not only conducted in urban water management, but also in sustainability itself. Moreover, water sustainability shifts from urban water management into water sensitive city. This transition needs comprehensive aspects such as social, institutional dynamics, technical innovation, and local contents. Some literatures about model of urban water management and the transition towards water sensitivity had been reviewed in this study. This study proposed discussion about model of urban water management and the transition towards water sensitive city. Research findings suggest that there are many different models developed in urban water management, but they are not comprehensive yet and only few studies discuss about the transition towards water sensitive and resilience city. The drawbacks of previous research can identify and fulfill the gap of this study. Therefore, the paper contributes a general framework for the urban water management modelling studies.

An overview of engineering concepts and current design algorithms for probabilistic structural analysis

NASA Technical Reports Server (NTRS)

Duffy, S. F.; Hu, J.; Hopkins, D. A.

1995-01-01

The article begins by examining the fundamentals of traditional deterministic design philosophy. The initial section outlines the concepts of failure criteria and limit state functions two traditional notions that are embedded in deterministic design philosophy. This is followed by a discussion regarding safety factors (a possible limit state function) and the common utilization of statistical concepts in deterministic engineering design approaches. Next the fundamental aspects of a probabilistic failure analysis are explored and it is shown that deterministic design concepts mentioned in the initial portion of the article are embedded in probabilistic design methods. For components fabricated from ceramic materials (and other similarly brittle materials) the probabilistic design approach yields the widely used Weibull analysis after suitable assumptions are incorporated. The authors point out that Weibull analysis provides the rare instance where closed form solutions are available for a probabilistic failure analysis. Since numerical methods are usually required to evaluate component reliabilities, a section on Monte Carlo methods is included to introduce the concept. The article concludes with a presentation of the technical aspects that support the numerical method known as fast probability integration (FPI). This includes a discussion of the Hasofer-Lind and Rackwitz-Fiessler approximations.

Integration of Antibody Array Technology into Drug Discovery and Development.

PubMed

Huang, Wei; Whittaker, Kelly; Zhang, Huihua; Wu, Jian; Zhu, Si-Wei; Huang, Ruo-Pan

Antibody arrays represent a high-throughput technique that enables the parallel detection of multiple proteins with minimal sample volume requirements. In recent years, antibody arrays have been widely used to identify new biomarkers for disease diagnosis or prognosis. Moreover, many academic research laboratories and commercial biotechnology companies are starting to apply antibody arrays in the field of drug discovery. In this review, some technical aspects of antibody array development and the various platforms currently available will be addressed; however, the main focus will be on the discussion of antibody array technologies and their applications in drug discovery. Aspects of the drug discovery process, including target identification, mechanisms of drug resistance, molecular mechanisms of drug action, drug side effects, and the application in clinical trials and in managing patient care, which have been investigated using antibody arrays in recent literature will be examined and the relevance of this technology in progressing this process will be discussed. Protein profiling with antibody array technology, in addition to other applications, has emerged as a successful, novel approach for drug discovery because of the well-known importance of proteins in cell events and disease development.

Excess Weapons Plutonium Immobilization in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jardine, L.; Borisov, G.B.

2000-04-15

The joint goal of the Russian work is to establish a full-scale plutonium immobilization facility at a Russian industrial site by 2005. To achieve this requires that the necessary engineering and technical basis be developed in these Russian projects and the needed Russian approvals be obtained to conduct industrial-scale immobilization of plutonium-containing materials at a Russian industrial site by the 2005 date. This meeting and future work will provide the basis for joint decisions. Supporting R&D projects are being carried out at Russian Institutes that directly support the technical needs of Russian industrial sites to immobilize plutonium-containing materials. Special R&Dmore » on plutonium materials is also being carried out to support excess weapons disposition in Russia and the US, including nonproliferation studies of plutonium recovery from immobilization forms and accelerated radiation damage studies of the US-specified plutonium ceramic for immobilizing plutonium. This intriguing and extraordinary cooperation on certain aspects of the weapons plutonium problem is now progressing well and much work with plutonium has been completed in the past two years. Because much excellent and unique scientific and engineering technical work has now been completed in Russia in many aspects of plutonium immobilization, this meeting in St. Petersburg was both timely and necessary to summarize, review, and discuss these efforts among those who performed the actual work. The results of this meeting will help the US and Russia jointly define the future direction of the Russian plutonium immobilization program, and make it an even stronger and more integrated Russian program. The two objectives for the meeting were to: (1) Bring together the Russian organizations, experts, and managers performing the work into one place for four days to review and discuss their work with each other; and (2) Publish a meeting summary and a proceedings to compile reports of all the excellent Russian plutonium immobilization contract work. This proceedings document presents the wide extent of Russian immobilization activities, provides a reference for their work, and makes it available to others.« less

Formative questioning in computer learning environments: a course for pre-service mathematics teachers

NASA Astrophysics Data System (ADS)

Akkoç, Hatice

2015-11-01

This paper focuses on a specific aspect of formative assessment, namely questioning. Given that computers have gained widespread use in learning and teaching, specific attention should be made when organizing formative assessment in computer learning environments (CLEs). A course including various workshops was designed to develop knowledge and skills of questioning in CLEs. This study investigates how pre-service mathematics teachers used formative questioning with technological tools such as Geogebra and Graphic Calculus software. Participants are 35 pre-service mathematics teachers. To analyse formative questioning, two types of questions are investigated: mathematical questions and technical questions. Data were collected through lesson plans, teaching notes, interviews and observations. Descriptive statistics of the number of questions in the lesson plans before and after the workshops are presented. Examples of two types of questions are discussed using the theoretical framework. One pre-service teacher was selected and a deeper analysis of the way he used questioning during his three lessons was also investigated. The findings indicated an improvement in using technical questions for formative purposes and that the course provided a guideline in planning and using mathematical and technical questions in CLEs.

A New Concept: Use of Negotiations in the Hazardous Waste Facility Permitting Process in New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, G.J.; Rose, W.M.; Domenici, P.V.

This paper describes a unique negotiation process leading to authorization of the U.S. Department of Energy (DOE) to manage and dispose remote-handled (RH) transuranic (TRU) mixed wastes at the Waste Isolation Pilot Plant (WIPP). The negotiation process involved multiple entities and individuals brought together under authority of the New Mexico Environment Department (NMED) to discuss and resolve technical and facility operational issues flowing from an NMED-issued hazardous waste facility Draft Permit. The novel negotiation process resulted in numerous substantive changes to the Draft Permit, which were ultimately memorialised in a 'Draft Permit as Changed'. This paper discusses various aspects ofmore » the negotiation process, including events leading to the negotiations, regulatory basis for the negotiations, negotiation participants, and benefits of the process. (authors)« less

Interactions of surfactants with lipid membranes.

PubMed

Heerklotz, Heiko

2008-01-01

Surfactants are surface-active, amphiphilic compounds that are water-soluble in the micro- to millimolar range, and self-assemble to form micelles or other aggregates above a critical concentration. This definition comprises synthetic detergents as well as amphiphilic peptides and lipopeptides, bile salts and many other compounds. This paper reviews the biophysics of the interactions of surfactants with membranes of insoluble, naturally occurring lipids. It discusses structural, thermodynamic and kinetic aspects of membrane-water partitioning, changes in membrane properties induced by surfactants, membrane solubilisation to micelles and other phases formed by lipid-surfactant systems. Each section defines and derives key parameters, mentions experimental methods for their measurement and compiles and discusses published data. Additionally, a brief overview is given of surfactant-like effects in biological systems, technical applications of surfactants that involve membrane interactions, and surfactant-based protocols to study biological membranes.

Composite Crew Module: Primary Structure

NASA Technical Reports Server (NTRS)

Kirsch, Michael T.

2011-01-01

In January 2007, the NASA Administrator and Associate Administrator for the Exploration Systems Mission Directorate chartered the NASA Engineering and Safety Center to design, build, and test a full-scale crew module primary structure, using carbon fiber reinforced epoxy based composite materials. The overall goal of the Composite Crew Module project was to develop a team from the NASA family with hands-on experience in composite design, manufacturing, and testing in anticipation of future space exploration systems being made of composite materials. The CCM project was planned to run concurrently with the Orion project's baseline metallic design within the Constellation Program so that features could be compared and discussed without inducing risk to the overall Program. This report discusses the project management aspects of the project including team organization, decision making, independent technical reviews, and cost and schedule management approach.

Micromilling: A method for ultra-rapid prototyping of plastic microfluidic devices

PubMed Central

Guckenberger, David J.; de Groot, Theodorus E.; Wan, Alwin M.D.; Beebe, David J.; Young, Edmond W. K.

2015-01-01

This tutorial review offers protocols, tips, insight, and considerations for practitioners interested in using micromilling to create microfluidic devices. The objective is to provide a potential user with information to guide them on whether micromilling would fill a specific need within their overall fabrication strategy. Comparisons are made between micromilling and other common fabrication methods for plastics in terms of technical capabilities and cost. The main discussion focuses on “how-to” aspects of micromilling, to enable a user to select proper equipment and tools, and obtain usable microfluidic parts with minimal start-up time and effort. The supplementary information provides more extensive discussion on CNC mill setup, alignment, and programming. We aim to reach an audience with minimal prior experience in milling, but with strong interests in fabrication of microfluidic devices. PMID:25906246

Aberrations and adaptive optics in super-resolution microscopy.

PubMed

Booth, Martin; Andrade, Débora; Burke, Daniel; Patton, Brian; Zurauskas, Mantas

2015-08-01

As one of the most powerful tools in the biological investigation of cellular structures and dynamic processes, fluorescence microscopy has undergone extraordinary developments in the past decades. The advent of super-resolution techniques has enabled fluorescence microscopy - or rather nanoscopy - to achieve nanoscale resolution in living specimens and unravelled the interior of cells with unprecedented detail. The methods employed in this expanding field of microscopy, however, are especially prone to the detrimental effects of optical aberrations. In this review, we discuss how super-resolution microscopy techniques based upon single-molecule switching, stimulated emission depletion and structured illumination each suffer from aberrations in different ways that are dependent upon intrinsic technical aspects. We discuss the use of adaptive optics as an effective means to overcome this problem. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy.

Review of PREPA Technical Requirements for Interconnecting Wind and Solar Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, Vahan; Booth, Sarah

2013-11-01

The Puerto Rico Electric Power Authority developed the minimum technical requirements for interconnection of wind turbine generation and photovoltaic power plants. NREL has conducted a review of these requirements based on generic technical aspects and electrical characteristics of wind and photovoltaic power plants, and on existing requirements from other utilities (both U.S. and European).

Plantation establishment: site preparation and tree planting methods

Treesearch

J. W. Van Sambeek

2008-01-01

The Silviculture and Ecology of the Central Hardwoods research unit of the USDA Forest Service is developing a series of technical notes for the management of forest lands in the Midwest. Many of the technical notes on different aspects of hardwood plantation establishment have been completed. At the request of the editor, the technical notes for site preparation, slit...

A WET TALE: TOXICITY OF COMPLEX EFFLUENTS

EPA Science Inventory

This course covers standards, regulations, policy, guidance and technical aspects of implementing the whole effluent toxicity program. The curriculum incorporates rationale and information on WET test requirements from USEPA documents, such as the Technical Support Document for W...

Energy from wood waste - A case study

NASA Technical Reports Server (NTRS)

Scola, R.; Daughtrey, K.

1980-01-01

A joint study has been conducted by NASA and Army installations collocated in a dense forest in southwestern Mississippi in order to determine the technical and economic feasibility of using wood waste as a renewable energy source. The study has shown that, with proper forest management, the timber on government lands could eventually support the total energy requirements of 832 billion Btu/yr. Analysis of the current conversion technologies indicates that the direct combustion spreader stoker approach is the best demonstrated technology for this specific application. The economics of the individual powerplants reveal them as attractive alternatives to fossil fueled plants. Environmental aspects are also discussed.

[Birth of otology illustrated by original texts].

PubMed

Mudry, A

2001-12-01

To be born, to appear, to begin. Though setting the birth of otology in the 19th century may seem a bit pretentious, the texts published at that time are ample proof of the fact. The combined impact of technical, scientific, medical and social factors led to the development of otology as a medical specialty. We discuss these different aspects in this article, illustrating them with extracts from the texts of the era. Once could say that the first half of the 19th century was a period of gestation for otology that was to come into full bloom during the second half of the same century.

Free as a bird - A point of view. [technical advance and humanistic aspects of aviation

NASA Technical Reports Server (NTRS)

Burke, J. D.

1978-01-01

A number of ways are discussed in which ingenious people can further increase their enjoyment of experimenting in air (balloons, man-powered flight, etc.). For the lowest cost forms of flight, private sponsorship has been modestly successful. Much more could be done if people would not take themselves so seriously and always demand that advanced technology should serve some nationalistic or economic goals. For the society, the next step forward will perhaps originate if it is demonstrated to the government, manufacturers, and customers that private flying has become too costly due to those factors which limit the acquisition and introduction of new knowledge.

Augmenting breath regulation using a mobile driven virtual reality therapy framework.

PubMed

Abushakra, Ahmad; Faezipour, Miad

2014-05-01

This paper presents a conceptual framework of a virtual reality therapy to assist individuals, especially lung cancer patients or those with breathing disorders to regulate their breath through real-time analysis of respiration movements using a smartphone. Virtual reality technology is an attractive means for medical simulations and treatment, particularly for patients with cancer. The theories, methodologies and approaches, and real-world dynamic contents for all the components of this virtual reality therapy (VRT) via a conceptual framework using the smartphone will be discussed. The architecture and technical aspects of the offshore platform of the virtual environment will also be presented.

Iterative Reconstruction Techniques in Abdominopelvic CT: Technical Concepts and Clinical Implementation.

PubMed

Patino, Manuel; Fuentes, Jorge M; Singh, Sarabjeet; Hahn, Peter F; Sahani, Dushyant V

2015-07-01

This article discusses the clinical challenge of low-radiation-dose examinations, the commonly used approaches for dose optimization, and their effect on image quality. We emphasize practical aspects of the different iterative reconstruction techniques, along with their benefits, pitfalls, and clinical implementation. The widespread use of CT has raised concerns about potential radiation risks, motivating diverse strategies to reduce the radiation dose associated with CT. CT manufacturers have developed alternative reconstruction algorithms intended to improve image quality on dose-optimized CT studies, mainly through noise and artifact reduction. Iterative reconstruction techniques take unique approaches to noise reduction and provide distinct strength levels or settings.

Clinical uses of liver stem cells.

PubMed

Dan, Yock Young

2012-01-01

Liver transplantation offers a definitive cure for many liver and metabolic diseases. However, the complex invasive procedure and paucity of donor liver graft organs limit its clinical applicability. Liver stem cells provide a potentially limitless source of cells that would be useful for a variety of clinical applications. These stem cells or hepatocytes generated from them can be used in cellular transplantation, bioartificial liver devices and drug testing in the development of new drugs. In this chapter, we review the technical aspects of clinical applications of liver stem cells and the progress made to date in the clinical setting. The difficulties and challenges of realizing the potential of these cells are discussed.

Overseas nurses in the National Health Service: a process of deskilling.

PubMed

O'Brien, Terri

2007-12-01

This paper shows that overseas nurses (OSN) recruited to UK hospital trusts become deskilled in technical aspects of clinical practice. Existing research reports that many newly recruited OSN are prevented from using technical skills acquired in training abroad, to the detriment of the National Health Service (NHS) and the concern of the nurses themselves. The author conducted case study work in three NHS hospital trusts in the northwest of England. The findings reported are part of a wider investigation into the assimilation(1) of OSN from the Philippines, India and Spain into NHS hospitals. Semi-structured interviews were undertaken with members of four groups of actors: managers, OSN, home nurses (HN) and mentors, which were analysed thematically. Results. The research confirms the finding that many OSN are prevented from using technical skills in the UK, but also suggests reasons why this is so. The finding of deskilling emerged strongly in all three cases and is singled out for discussion in this paper. The experience of OSN highlights ambiguity surrounding the role of the nurse in British hospitals. This arises partly because OSN tend to be recruited to the bottom grades of nursing in the NHS, where their technical skills are underused. Segmentation within the nursing hierarchy contributes to the conflicting messages and mismatch of expectations experienced by nurses at the ward level, regarding the role of the nurse.

Amelioration and retrofitting of educational buildings

NASA Astrophysics Data System (ADS)

Casciati, Fabio; Casciati, Sara

2018-01-01

Following a seismic event that occurred years ago in Central Italy, the public opinion was growing and growing a concern on the adequacy of educational buildings all across Italy. This activated several political decisions and a consequent technical effort is in progress. Technically speaking one has to manage the classical problem of retrofitting existing buildings. However, the legal environment goes across national codes, targeted guidelines and the professional need of achieving pragmatic solutions based on ethical and social acceptation schemes.This paper introduces the topic in its worldwide exception and focuses then on some operative aspects in the Italian situation. It outlines the consolidated steps along this technical process and emphasizes the weak aspects one meets when going across the designers' reports.

Holistic Assessment and Ethical Disputation on a New Trend in Solid Biofuels.

PubMed

Hašková, Simona

2017-04-01

A new trend in the production technology of solid biof uels has appeared. There is a wide consensus that most solid biofuels will be produced according to the new production methods within a few years. Numerous samples were manufactured from agro-residues according to conventional methods as well as new methods. Robust analyses that reviewed the hygienic, environmental, financial and ethical aspects were performed. The hygienic and environmental aspect was assessed by robust chemical and technical analyses. The financial aspect was assessed by energy cost breakdown. The ethical point of view was built on the above stated findings, the survey questionnaire and critical discussion with the literature. It is concluded that the new production methods are significantly favourable from both the hygienic and environmental points of view. Financial indicators do not allow the expressing of any preference. Regarding the ethical aspect, it is concluded that the new methods are beneficial in terms of environmental responsibility. However, it showed that most of the customers that took part in the survey are price oriented and therefore they tend to prefer the cheaper-conventional alternative. In the long term it can be assumed that expansion of the new technology and competition among manufacturers will reduce the costs.

Technical Aspects Related to the Application of SFM Photogrammetry in High Mountain

NASA Astrophysics Data System (ADS)

Scaioni, M.; Crippa, J.; Corti, M.; Barazzetti, L.; Fugazza, D.; Azzoni, R.; Cernuschi, M.; Diolaiuti, G. A.

2018-05-01

Structure-from-Motion (SfM) photogrammetry is a flexible and powerful tool to provide 3D point clouds describing the surface of objects. Due to the easy transportability and low-cost of necessary equipment with respect to laser scanning techniques, SfM photogrammetry has great potential to be applied in harsh high-mountain environment. Here point clouds and derived by-products (DEM's, orthoimages, Virtual-Reality models) are needed to document surface morphology and to investigate dynamic processes such as landslides, avalanches, river and soil erosion, glacier retreat. On the other hand, from both the literature and the direct experience of the authors, there are some technical issues that still deserve thorough investigations. The paper would like to address some open problems and suggest solutions, in particular on regards of the photogrammetric network design, the strategy for georeferencing the final products, and for their comparison within time. The discussion is documented with some examples, mainly from surveying campaigns at the Forni Glacier in Italian Alps.

Raman spectroscopy as a tool for ecology and evolution.

PubMed

Germond, Arno; Kumar, Vipin; Ichimura, Taro; Moreau, Jerome; Furusawa, Chikara; Fujita, Hideaki; Watanabe, Tomonobu M

2017-06-01

Scientists are always on the lookout for new modalities of information which could reveal new biological features that are useful for deciphering the complexity of biological systems. Here, we introduce Raman spectroscopy as a prime candidate for ecology and evolution. To encourage the integration of this microscopy technique in the field of ecology and evolution, it is crucial to discuss first how Raman spectroscopy fits within the conceptual, technical and pragmatic considerations of ecology and evolution. In this paper, we show that the spectral information holds reliable indicators of intra- and interspecies variations, which can be related to the environment, selective pressures and fitness. Moreover, we show how the technical and pragmatic aspects of this modality (non-destructive, non-labelling, speed, relative low cost, etc.) enable it to be combined with more conventional methodologies. With this paper, we hope to open new avenues of research and extend the scope of available methodologies used in ecology and evolution. © 2017 The Authors.

Nine human factors contributing to the user acceptance of telemedicine applications: a cognitive-emotional approach.

PubMed

Buck, Susanne

2009-01-01

Much attention is paid to the technical aspects of telemedicine in the development of new applications, but the enthusiasm about what is technically possible very often leads to the user acceptance of such products being neglected. The number of successful and sustainable telemedicine applications would be much higher if developers concentrated more on matters related to the cognitive-emotional situation of the users involved in telemedicine. The users include the care and cure providers, as well as the care and cure receivers. Based on an informal literature search and discussions with telemedicine implementation staff, nine factors have been identified which are essential for the user acceptance of telemedicine applications. All of them are connected more to the cognitive-emotional than to the cognitive-rational side of information processing. This suggests that in the future the cognitive-emotional side will need more attention. This in turn implies that the nine points mentioned above have to find their way into requirements engineering, development processes and product life cycles.

Facility Instrumentation for SOFIA: Technical Specifications and Scientific Goals

NASA Astrophysics Data System (ADS)

Stacey, G. J.

2000-05-01

The Stratospheric Observatory for Infrared Astronomy (SOFIA) is NASA's next generation airborne observatory consisting of a 2.5 m telescope in a modified Boeing 747 SP. First light is expected in late 2002. Three "Facility Class" instruments were among the first generation of instruments selected to fly on SOFIA. These instruments, currently under development are (1) a 5 to 38 um imaging photometer based on twin As:Si and Sb:Sb BIB arrays (FORCAST), (2) a 40 to 300 um photometer based on three arrays of bolometers, and (3) a 17 to 210 um eschelle grating spectrometer based on an Sb:Sb BIB array and a Ge:Sb and stressed Ge:Ga array of photoconductors. I will discuss both the technical aspects of these facility instruments, and some of the exciting new science that is possible with these ground breaking instruments on an airborne 2.5 meter telescope. Science topics include circumstellar debris disks, star formation, the Galactic Center, and distant galaxies.

The Queued Service Observing Project at CFHT

NASA Astrophysics Data System (ADS)

Martin, Pierre; Savalle, Renaud; Vermeulen, Tom; Shapiro, Joshua N.

2002-12-01

In order to maximize the scientific productivity of the CFH12K mosaic wide-field imager (and soon MegaCam), the Queued Service Observing (QSO) mode was implemented at the Canada-France-Hawaii Telescope at the beginning of 2001. The QSO system consists of an ensemble of software components allowing for the submission of programs, the preparation of queues, and finally the execution and evaluation of observations. The QSO project is part of a broader system known as the New Observing Process (NOP). This system includes data acquisition, data reduction and analysis through a pipeline named Elixir, and a data archiving and distribution component (DADS). In this paper, we review several technical and operational aspects of the QSO project. In particular, we present our strategy, technical architecture, program submission system, and the tools developed for the preparation and execution of the queues. Our successful experience of over 150 nights of QSO operations is also discussed along with the future plans for queue observing with MegaCam and other instruments at CFHT.

New Mass Properties Engineers Aerospace Ballasting Challenge Facilitated by the SAWE Community

NASA Technical Reports Server (NTRS)

Cutright, Amanda; Shaughnessy, Brendan

2010-01-01

The discipline of Mass Properties Engineering tends to find the engineers; not typically vice versa. In this case, two engineers quickly found their new responsibilities deep in many aspects of mass properties engineering and required to meet technical challenges in a fast paced environment. As part of NASA's Constellation Program, a series of flight tests will be conducted to evaluate components of the new spacecraft launch vehicles. One of these tests is the Pad Abort 1 (PA-1) flight test which will test the Launch Abort System (LAS), a system designed to provide escape for astronauts in the event of an emergency. The Flight Test Articles (FTA) used in this flight test are required to match mass properties corresponding to the operational vehicle, which has a continually evolving design. Additionally, since the structure and subsystems for the Orion Crew Module (CM) FTA are simplified versions of the final product, thousands of pounds of ballast are necessary to achieve the desired mass properties. These new mass properties engineers are responsible for many mass properties aspects in support of the flight test, including meeting the ballasting challenge for the CM Boilerplate FTA. SAWE expert and experienced mass properties engineers, both those that are directly on the team and many that supported via a variety of Society venues, significantly contributed to facilitating the success of addressing this particular mass properties ballasting challenge, in addition to many other challenges along the way. This paper discusses the details regarding the technical aspects of this particular mass properties challenge, as well as identifies recommendations for new mass properties engineers that were learned from the SAWE community along the way.

Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

PubMed

Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

2017-03-01

The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P < .001). Of a total possible score of 14 using the HONcode analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and HONcode principles. The mean readability for OWs and PWs was grade 11 and grade 10, respectively, significantly higher than the grade 7 level recommended by the National Institutes of Health. Assessment of technical criteria demonstrated room for improvement in providing links to social media and blogs and reducing advertisements. Improving the quality and readability of online information may result in increased patient understanding, more active patient involvement, and ultimately better outcomes. Enhancing the technical aspects of websites may increase website traffic and patient volume. NA.

Challenges and Opportunities: Two Weeks of Teaching Technical Communication at Suzhou University, China.

ERIC Educational Resources Information Center

Ding, Daniel; Jablonski, John

2001-01-01

Relates the authors' experience teaching technical writing for two weeks at Suzhou University in China. Discusses activities; examines four technical writing textbooks purchased there; and offers suggestions about how technical communication might be established as a separate academic discipline in Chinese universities. Discusses technical…

Brain-Mind Operational Architectonics Imaging: Technical and Methodological Aspects

PubMed Central

Fingelkurts, Andrew A; Fingelkurts, Alexander A

2008-01-01

This review paper deals with methodological and technical foundations of the Operational Architectonics framework of brain and mind functioning. This theory provides a framework for mapping and understanding important aspects of the brain mechanisms that constitute perception, cognition, and eventually consciousness. The methods utilized within Operational Architectonics framework allow analyzing with an incredible detail the operational behavior of local neuronal assemblies and their joint activity in the form of unified and metastable operational modules, which constitute the whole hierarchy of brain operations, operations of cognition and phenomenal consciousness. PMID:19526071

Navigating sticky areas in transdermal product development.

PubMed

Strasinger, Caroline; Raney, Sam G; Tran, Doanh C; Ghosh, Priyanka; Newman, Bryan; Bashaw, Edward D; Ghosh, Tapash; Shukla, Chinmay G

2016-07-10

The benefits of transdermal delivery over the oral route to combat such issues of low bioavailability and limited controlled release opportunities are well known and have been previously discussed by many in the field (Prausnitz et al. (2004) [1]; Hadgraft and Lane (2006) [2]). However, significant challenges faced by developers as a product moves from the purely theoretical to commercial production have hampered full capitalization of the dosage forms vast benefits. While different technical aspects of transdermal system development have been discussed at various industry meetings and scientific workshops, uncertainties have persisted regarding the pharmaceutical industry's conventionally accepted approach for the development and manufacturing of transdermal systems. This review provides an overview of the challenges frequently faced and the industry's best practices for assuring the quality and performance of transdermal delivery systems and topical patches (collectively, TDS). The topics discussed are broadly divided into the evaluation of product quality and the evaluation of product performance; with the overall goal of the discussion to improve, advance and accelerate commercial development in the area of this complex controlled release dosage form. Published by Elsevier B.V.

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

Third International Mathematics and Science Study 1999 Video Study Technical Report: Volume 2--Science. Technical Report. NCES 2011-049

ERIC Educational Resources Information Center

Garnier, Helen E.; Lemmens, Meike; Druker, Stephen L.; Roth, Kathleen J.

2011-01-01

This second volume of the Third International Mathematics and Science Study (TIMSS) 1999 Video Study Technical Report focuses on every aspect of the planning, implementation, processing, analysis, and reporting of the science components of the TIMSS 1999 Video Study. The report is intended to serve as a record of the actions and documentation of…

Seismic microzonation in Latin America and the Caribbean: social, cultural, economic and political aspects

NASA Astrophysics Data System (ADS)

Murria, J.

2009-04-01

The lack of success, not to say failure, of seismic microzonation projects in the Latin America and Caribbean nations-and for that matter elsewhere in the world-should not be attributed to the lack of technical and scientific expertise of our engineers and scientists as there exists in our continent sufficient knowledge and information about the techniques and procedures that have been successfully used elsewhere in the world in the implementation of seismic microzonation projects. The main constrains to the implementation of seismic microzonation projects in Latin America and the Caribbean are of an economic, social, political, and cultural aspects rather than the purely scientific and engineering aspects. Another very important factor contributing to this lack of success has been the apparent failure of the scientific and technical community to convince decision makers (both official and private) that the sound implementation of seismic microzonation projects are a valid instrument to mitigate the negative effects that earthquakes have on the population, on the physical infrastructure and on the environment. An attempt will be made in this paper to analyze these "non technical" aspects and try to arrive at some conclusions as well as to some possible lines of action for the successful implementation of seismic microzonation projects in the seismic risk prone Latin American and Caribbean nations.

Clinical pancreatic islet transplantation.

PubMed

Shapiro, A M James; Pokrywczynska, Marta; Ricordi, Camillo

2017-05-01

Clinical pancreatic islet transplantation can be considered one of the safest and least invasive transplant procedures. Remarkable progress has occurred in both the technical aspects of islet cell processing and the outcomes of clinical islet transplantation. With >1,500 patients treated since 2000, this therapeutic strategy has moved from a curiosity to a realistic treatment option for selected patients with type 1 diabetes mellitus (that is, those with hypoglycaemia unawareness, severe hypoglycaemic episodes and glycaemic lability). This Review outlines the techniques required for human islet isolation, in vitro culture before the transplant and clinical islet transplantation, and discusses indications, optimization of recipient immunosuppression and management of adjunctive immunomodulatory and anti-inflammatory strategies. The potential risks, long-term outcomes and advances in treatment after the transplant are also discussed to further move this treatment towards becoming a more widely available option for patients with type 1 diabetes mellitus and eventually a potential cure.

Integrated national energy planning and management: methodology and application to Sri Lanka. World Bank technical paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munasinghe, M.; Meier, P.

1988-01-01

Given the importance of energy in modern economies, the first part of the volume is devoted to examining some of the key conceptual and analytical tools available for energy-policy analysis and planning. Policy tools and institutional frameworks that will facilitate better energy management are also discussed. Energy-policy analysis is explained, while effective energy management techniques are discussed to achieve desirable national objectives, using a selected set of policies and policy instruments. In the second part of the volume, the actual application of the principles set out earlier is explained through a case study of Sri Lanka. The monograph integrates themore » many aspects of the short-term programs already begun with the options for the medium to long term, and ends with the outline of a long-term strategy for Sri Lanka.« less

Analysis of Intracellular Metabolites from Microorganisms: Quenching and Extraction Protocols

PubMed Central

Villas-Boas, Silas G.; Aggio, Raphael

2017-01-01

Sample preparation is one of the most important steps in metabolome analysis. The challenges of determining microbial metabolome have been well discussed within the research community and many improvements have already been achieved in last decade. The analysis of intracellular metabolites is particularly challenging. Environmental perturbations may considerably affect microbial metabolism, which results in intracellular metabolites being rapidly degraded or metabolized by enzymatic reactions. Therefore, quenching or the complete stop of cell metabolism is a pre-requisite for accurate intracellular metabolite analysis. After quenching, metabolites need to be extracted from the intracellular compartment. The choice of the most suitable metabolite extraction method/s is another crucial step. The literature indicates that specific classes of metabolites are better extracted by different extraction protocols. In this review, we discuss the technical aspects and advancements of quenching and extraction of intracellular metabolite analysis from microbial cells. PMID:29065530

Nuclear medicine in urology and nephrology

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Reilly, P.H.; Shields, R.A.; Testa, H.J.

This edition on radionuclide techniques in urology and nephrology reflects the many advances since 1979. Emphasis has been given to diuretic renography and studies of urinary reflux. A new chapter discusses the diagnosis of lower urinary tract problems. The editors have divided the book into three sections. The first part presents a description of the techniques and their interpretation. Renography, renal scanning, clearance studies, and bone scanning are covered. The second section gives an in-depth discussion of the application of these techniques to obstructive uropathy, urologic tumors, renal transplantation, trauma, and lower urinary tract, pediatric, and nephrologic problems. The lastmore » part of the book deals with basic principles. It expands on the relevant theoretical and technical aspects not covered in detail in part 1. In this last portion of the book the editors have grouped together the chapters on physics, instrumentation, radiopharmaceuticals, and radiation dosimetry.« less

Bioleaching of heavy metals from sewage sludge: a review.

PubMed

Pathak, Ashish; Dastidar, M G; Sreekrishnan, T R

2009-06-01

During the treatment of sewage, a huge volume of sludge is generated, which is disposed of on land as soil fertilizer/conditioner due to the presence of nitrogen, phosphorus, potassium and other nutrients. However, the presence of toxic heavy metals and other toxic compounds in the sludge restricts its use as a fertilizer. Over the years, bioleaching has been developed as an environmentally friendly and cost-effective technology for the removal of heavy metals from the sludge. The present paper gives an overview of the various bioleaching studies carried out in different modes of operation. The various important aspects such as pathogen destruction, odor reduction and metal recovery from acidic leachate also have been discussed. Further, a detailed discussion was made on the various technical problems associated with the bioleaching process, which need to be addressed while developing the process on a larger scale.

Groundwater recharge with reclaimed municipal wastewater: health and regulatory considerations.

PubMed

Asano, Takashi; Cotruvo, Joseph A

2004-04-01

Groundwater recharge with reclaimed municipal wastewater presents a wide spectrum of technical and health challenges that must be carefully evaluated prior to undertaking a project. This review will provide a discussion of groundwater recharge and its management with special reference to health and regulatory aspects of groundwater recharge with reclaimed municipal wastewater. At present, some uncertainties with respect to health risk considerations have limited expanding use of reclaimed municipal wastewater for groundwater recharge, especially when a large portion of the groundwater contains reclaimed wastewater that may affect the domestic water supply. The proposed State of California criteria for groundwater recharge are discussed as an illustration of a cautious approach. In addition, a summary is provided of the methodology used in developing the World Health Organization's Guidelines for Drinking Water Quality to illustrate how numerical guideline values are generated for contaminants that may be applicable to groundwater recharge.

Redox‐Flow Batteries: From Metals to Organic Redox‐Active Materials

PubMed Central

Winsberg, Jan; Hagemann, Tino; Janoschka, Tobias; Hager, Martin D.

2016-01-01

Abstract Research on redox‐flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of “green”, safe, and cost‐efficient energy storage, research has shifted from metal‐based materials to organic active materials in recent years. This Review presents an overview of various flow‐battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox‐active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted. PMID:28070964

Cell separation: Terminology and practical considerations

PubMed Central

Tomlinson, Sophie; Yang, Xuebin B; Kirkham, Jennifer

2013-01-01

Cell separation is a powerful tool in biological research. Increasing usage, particularly within the tissue engineering and regenerative medicine communities, means that researchers from a diverse range of backgrounds are utilising cell separation technologies. This review aims to offer potential solutions to cell sorting problems and to clarify common ambiguities in terminology and experimental design. The frequently used cell separation terms of ‘purity’, ‘recovery’ and ‘viability’ are discussed, and attempts are made to reach a consensus view of their sometimes ambiguous meanings. The importance of appropriate experimental design is considered, with aspects such as marker expression, tissue isolation and original cell population analysis discussed. Finally, specific technical issues such as cell clustering, dead cell removal and non-specific antibody binding are considered and potential solutions offered. The solutions offered may provide a starting point to improve the quality of cell separations achieved by both the novice and experienced researcher alike. PMID:23440031

Addressing Criticality in Rare Earth Elements via Permanent Magnets Recycling

NASA Astrophysics Data System (ADS)

Nlebedim, I. C.; King, A. H.

2017-12-01

Rare earth elements (REEs) are critical for many advanced technologies and are faced with potential supply disruptions. Recycling of permanent magnets (PMs) can be good sources for REEs which can help minimize global dependence on freshly mined REEs, but PMs are rarely recycled. Recycling of PMs has been discussed with respect to improving REEs resource sustainability. Some challenges to be addressed in order to establish industrially deployable technologies for PMs recycling have also been discussed, including profitability, energy efficiency and environmental impacts. Key considerations for promoting circular economy via PMs recycling is proposed with the focus on deciding the target points in the supply chain at which the recycled products will be inserted. Important technical considerations for recycling different forms of waste PMs, including swarfs, slags, shredded and intact hard disk drives magnets, have been presented. The aspects of circular economy considered include reusing magnets, remanufacturing magnets and recovering of REEs from waste PMs.

Addressing Criticality in Rare Earth Elements via Permanent Magnets Recycling

NASA Astrophysics Data System (ADS)

Nlebedim, I. C.; King, A. H.

2018-02-01

Rare earth elements (REEs) are critical for many advanced technologies and are faced with potential supply disruptions. Recycling of permanent magnets (PMs) can be good sources for REEs which can help minimize global dependence on freshly mined REEs, but PMs are rarely recycled. Recycling of PMs has been discussed with respect to improving REEs resource sustainability. Some challenges to be addressed in order to establish industrially deployable technologies for PMs recycling have also been discussed, including profitability, energy efficiency and environmental impacts. Key considerations for promoting circular economy via PMs recycling is proposed with the focus on deciding the target points in the supply chain at which the recycled products will be inserted. Important technical considerations for recycling different forms of waste PMs, including swarfs, slags, shredded and intact hard disk drives magnets, have been presented. The aspects of circular economy considered include reusing magnets, remanufacturing magnets and recovering of REEs from waste PMs.

Ground Operations Aerospace Language (GOAL). Volume 4: Interpretive code translator

NASA Technical Reports Server (NTRS)

1973-01-01

This specification identifies and describes the principal functions and elements of the Interpretive Code Translator which has been developed for use with the GOAL Compiler. This translator enables the user to convert a compliled GOAL program to a highly general binary format which is designed to enable interpretive execution. The translator program provides user controls which are designed to enable the selection of various output types and formats. These controls provide a means for accommodating many of the implementation options which are discussed in the Interpretive Code Guideline document. The technical design approach is given. The relationship between the translator and the GOAL compiler is explained and the principal functions performed by the Translator are described. Specific constraints regarding the use of the Translator are discussed. The control options are described. These options enable the user to select outputs to be generated by the translator and to control vrious aspects of the translation processing.

Sodium-NaK engineering handbook. Volume III. Sodium systems, safety, handling, and instrumentation. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, O J

1978-01-01

The handbook is intended for use by present and future designers in the Liquid Metals Fast Breeder Reactor (LMFBR) Program and by the engineering and scientific community performing other type investigation and exprimentation requiring high-temperature sodium and NaK technology. The arrangement of subject matter progresses from a technological discussion of sodium and sodium--potassium alloy (NaK) to discussions of varius categories and uses of hardware in sodium and NaK systems. Emphasis is placed on sodium and NaK as heat-transport media. Sufficient detail is included for basic understanding of sodium and NaK technology and of technical aspects of sodium and NaK componentsmore » and instrument systems. Information presented is considered adequate for use in feasibility studies and conceptual design, sizing components and systems, developing preliminary component and system descriptions, identifying technological limitations and problem areas, and defining basic constraints and parameters.« less

Special report: workshop on 4D-treatment planning in actively scanned particle therapy--recommendations, technical challenges, and future research directions.

PubMed

Knopf, Antje; Bert, Christoph; Heath, Emily; Nill, Simeon; Kraus, Kim; Richter, Daniel; Hug, Eugen; Pedroni, Eros; Safai, Sairos; Albertini, Francesca; Zenklusen, Silvan; Boye, Dirk; Söhn, Matthias; Soukup, Martin; Sobotta, Benjamin; Lomax, Antony

2010-09-01

This article reports on a 4D-treatment planning workshop (4DTPW), held on 7-8 December 2009 at the Paul Scherrer Institut (PSI) in Villigen, Switzerland. The participants were all members of institutions actively involved in particle therapy delivery and research. The purpose of the 4DTPW was to discuss current approaches, challenges, and future research directions in 4D-treatment planning in the context of actively scanned particle radiotherapy. Key aspects were addressed in plenary sessions, in which leaders of the field summarized the state-of-the-art. Each plenary session was followed by an extensive discussion. As a result, this article presents a summary of recommendations for the treatment of mobile targets (intrafractional changes) with actively scanned particles and a list of requirements to elaborate and apply these guidelines clinically.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 25: The impact of language and culture on technical communication in Japan

NASA Technical Reports Server (NTRS)

Kohl, John R.; Barclay, Rebecca O.; Pinelli, Thomas E.; Keene, Michael L.; Kennedy, John M.

1993-01-01

One of the most significant developments in the field of technical communication during the 1980's and 1990's has been a growing interest in international technical communication, including technical communication in Japan. This article provides insights into aspects of the Japanese language and culture that affect Japanese technical communication practices. These insights are then used to interpret and report the results of a survey of Japanese aerospace engineers and scientists concerning the kinds of communication products they produce, the kinds they use, and the specific recommendation they would offer to designers of academic programs in technical communication.

NASA/DoD Aerospace Knowledge Diffusion Research Project. XXV - The impact of language and culture on technical communication in Japan

NASA Technical Reports Server (NTRS)

Kohl, John R.; Barclay, Rebecca O.; Pinelli, Thomas E.; Keene, Michael L.; Kennedy, John M.

1993-01-01

One of the most significant developments in the field of technical communication during the 1980s and 1990s has been a growing interest in international technical communication, including technical communication in Japan. This article provides insights into aspects of the Japanese language and culture that affect Japanese technical communication practices. The authors then use these insights to interpret and report the results of a survey of Japanese aerospace engineers and scientists concerning the kinds of communication products they produce, the kinds they use, and the specific recommendations they would offer to designers of academic programs in technical communication.

Consequences of Delayed, Unfinished, or Missed Nursing Care During Labor and Birth.

PubMed

Simpson, Kathleen Rice; Lyndon, Audrey

: The purpose of this study was to examine the concept of delayed, unfinished, or missed nursing care when patient census and acuity exceed nurse staffing resources with nurses who care for women during labor and birth. Focus groups were held during which labor nurses were asked about aspects of nursing care that may be regularly delayed, unfinished, or completely missed during labor and birth, including possible reasons and potential consequences. Seventy-one labor nurses participated in 11 focus groups in 6 hospitals. Nurses focused on support and encouragement as aspects of care that they felt are essential but often not able to be performed when the unit is busy. Nurses seemed to assume technical features of care as a "given" in the background and not always noticed unless missed. They voiced concerns about risks to maternal and fetal well-being when they were short-staffed. Potential outcomes were discussed including cesarean birth, depressed infants at birth, hemorrhage, and negative effects on patient satisfaction, successful breast-feeding, and the overall patient experience. When essential aspects of nursing care are delayed, unfinished, or completely missed, there are potentially negative implications for numerous patient outcomes and patient safety is at risk.

Portal vein embolization for induction of selective hepatic hypertrophy prior to major hepatectomy: rationale, techniques, outcomes and future directions

PubMed Central

Li, David; Madoff, David C.

2016-01-01

The ability to modulate the future liver remnant (FLR) is a key component of modern oncologic hepatobiliary surgery practice and has extended surgical candidacy for patients who may have been previously thought unable to survive liver resection. Multiple techniques have been developed to augment the FLR including portal vein embolization (PVE), associating liver partition and portal vein ligation (ALPPS), and the recently reported transhepatic liver venous deprivation (LVD). PVE is a well-established means to improve the safety of liver resection by redirecting blood flow to the FLR in an effort to selectively hypertrophy and ultimately improve functional reserve of the FLR. This article discusses the current practice of PVE with focus on summarizing the large number of published reports from which outcomes based practices have been developed. Both technical aspects of PVE including volumetry, approaches, and embolization agents; and clinical aspects of PVE including data supporting indications, and its role in conjunction with chemotherapy and transarterial embolization will be highlighted. PVE remains an important aspect of oncologic care; in large part due to the substantial foundation of information available demonstrating its clear clinical benefit for hepatic resection candidates with small anticipated FLRs. PMID:28154774

Measurement and regulation of cardiac ventricular repolarization: from the QT interval to repolarization morphology

PubMed Central

Couderc, Jean-Philippe

2009-01-01

Ventricular repolarization (VR) is a crucial step in cardiac electrical activity because it corresponds to a recovery period setting the stage for the next heart contraction. Small perturbations of the VR process can predispose an individual to lethal arrhythmias. In this review, I aim to provide an overview of the methods developed to analyse static and dynamic aspects of the VR process when recorded from a surface electrocardiogram (ECG). The first section describes the list of physiological and clinical factors that can affect the VR. Technical aspects important to consider when digitally processing ECGs are provided as well. Special attention is given to the analysis of the effect of heart rate on the VR and its regulation by the autonomic nervous system. The final section provides the rationale for extending the analysis of the VR from its duration to its morphology. Several modelling techniques and measurement methods will be presented and their role within the arena of cardiac safety will be discussed. PMID:19324709

Instruction, Feedback and Biometrics: The User Interface for Fingerprint Authentication Systems

NASA Astrophysics Data System (ADS)

Riley, Chris; Johnson, Graham; McCracken, Heather; Al-Saffar, Ahmed

Biometric authentication is the process of establishing an individual’s identity through measurable characteristics of their behaviour, anatomy or physiology. Biometric technologies, such as fingerprint systems, are increasingly being used in a diverse range of contexts from immigration control, to banking and personal computing. As is often the case with emerging technologies, the usability aspects of system design have received less attention than technical aspects. Fingerprint systems pose a number of challenges for users and past research has identified issues with correct finger placement, system feedback and instruction. This paper describes the development of an interface for fingerprint systems using an iterative, participative design approach. During this process, several different methods for the presentation of instruction and feedback were identified. The different types of instruction and feedback were tested in a study involving 82 participants. The results showed that feedback had a statistically significant effect on overall system performance, but instruction did not. The design recommendations emerging from this study, and the use of participatory design in this context, are discussed.

Project-Based Learning Courses: The Relationship Between Faculty-Intended Course Implementation and Students' Perceptions

NASA Astrophysics Data System (ADS)

Simonovich, Jennifer A.; Towers, Emily; Zastavker, Yevgeniya V.

2012-02-01

Project-based learning (PjBL) has been shown to improve students' performance and satisfaction with their coursework, particularly in science and engineering courses. Specific aspects of PjBL that contribute to this improvement are student autonomy, course scaffolding, and instructor support. This study investigates two PjBL courses required for engineering majors at a small technical school, Introductory Mechanics Laboratory and Introductory Engineering Design. The three data sources used in this work are classroom observations (one laboratory and four design sessions) and semi-structured in-depth interviews with twelve students and six faculty. Grounded theory approach is used in a two-step fashion by (1) analyzing each data set individually and (2) performing full triangulation of all three data sets. In this talk, we demonstrate the relationship between faculty intentions and student perceptions regarding the three PjBL aspects -- student autonomy, course scaffolding, and instructor support -- within the context of these two courses. We further discuss implications for the course design and professional development of faculty.

Broadband stripline ferromagnetic resonance spectroscopy of ferromagnetic films, multilayers and nanostructures

NASA Astrophysics Data System (ADS)

Maksymov, Ivan S.; Kostylev, Mikhail

2015-05-01

This paper presents a comprehensive critical overview of fundamental and practical aspects of the modern stripline broadband ferromagnetic resonance (BFMR) spectroscopy largely employed for the characterisation of magnetic low-dimensional systems, such as thin ferro- and ferromagnetic, multiferroic and half-metallic films, multi-layers and nanostructures. These planar materials form the platform of the nascent fields of magnonics and spintronics. Experimental and theoretical results of research on these materials are summarised, along with systematic description of various phenomena associated with the peculiarities of the stripline BFMR, such as the geometry of stripline transducers, the orientation of the static magnetic field, the presence of microwave eddy currents, and the impacts of non-magnetic layers, interfaces and surfaces in the samples. Results from 240 articles, textbooks and technical reports are presented and many practical examples are discussed in detail. This review will be of interest to both general physical audience and specialists conducting research on various aspects of magnetisation dynamics and nanomagnetism.

Technical variables in high-throughput miRNA expression profiling: much work remains to be done.

PubMed

Nelson, Peter T; Wang, Wang-Xia; Wilfred, Bernard R; Tang, Guiliang

2008-11-01

MicroRNA (miRNA) gene expression profiling has provided important insights into plant and animal biology. However, there has not been ample published work about pitfalls associated with technical parameters in miRNA gene expression profiling. One source of pertinent information about technical variables in gene expression profiling is the separate and more well-established literature regarding mRNA expression profiling. However, many aspects of miRNA biochemistry are unique. For example, the cellular processing and compartmentation of miRNAs, the differential stability of specific miRNAs, and aspects of global miRNA expression regulation require specific consideration. Additional possible sources of systematic bias in miRNA expression studies include the differential impact of pre-analytical variables, substrate specificity of nucleic acid processing enzymes used in labeling and amplification, and issues regarding new miRNA discovery and annotation. We conclude that greater focus on technical parameters is required to bolster the validity, reliability, and cultural credibility of miRNA gene expression profiling studies.

Leo Szilard Lectureship Award: Science Matters - Technical Dimensions of Arms Control and Non-Proliferation Agreements

NASA Astrophysics Data System (ADS)

Timbie, James

2017-01-01

Agreements to reduce nuclear arms and prevent proliferation of nuclear weapons are technical as well as political documents. They must be both technically sound and politically acceptable. This presentation illustrates technical aspects of arms control and non-proliferation agreements, with examples from SALT I, INF, the HEU Agreement, START, and the Iran nuclear negotiations, drawing on 44 years of personal experience in the negotiation of these agreements. The lecture is designed to convey an appreciation of the role that individuals with technical training can play in diplomatic efforts to reduce nuclear forces and prevent nuclear proliferation.

Design and Development of a Virtual Facility Tour Using iPIX(TM) Technology

NASA Technical Reports Server (NTRS)

Farley, Douglas L.

2002-01-01

The capabilities of the iPIX virtual tour software, in conjunction with a web-based interface create a unique and valuable system that provides users with an efficient virtual capability to tour facilities while being able to acquire the necessary technical content is demonstrated. A users guide to the Mechanics and Durability Branch's virtual tour is presented. The guide provides the user with instruction on operating both scripted and unscripted tours as well as a discussion of the tours for Buildings 1148, 1205 and 1256 and NASA Langley Research Center. Furthermore, an indepth discussion has been presented on how to develop a virtual tour using the iPIX software interface with conventional html and JavaScript. The main aspects for discussion are on network and computing issues associated with using this capability. A discussion of how to take the iPIX pictures, manipulate them and bond them together to form hemispherical images is also presented. Linking of images with additional multimedia content is discussed. Finally, a method to integrate the iPIX software with conventional HTML and JavaScript to facilitate linking with multi-media is presented.

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including recertification. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

Sub-millimetre-wave and far infrared ESA missions with a focus on antenna technologies

NASA Astrophysics Data System (ADS)

de Maagt, Peter; Polegre, Arturo; Crone, Gerry

2017-11-01

The are of (sub)millimetre wave and far-infrared antenna technology is a very dynamic sector in electromagnetics. Several future ESA missions have been planned and their requirements are pushing the limits of existing technologies. Feasibility studies have provided baseline concepts, which have helped to grasp the main features of these instruments and to identify their critical aspects. A number of scientific and technical activities have then followed, dedicated to specific topics. The paper discusses (sub)millimetre wave and far-infrared Earth observation and astronomical instruments. Furthermore, generic technology work carried out in the frame of ESA contracts, applicable to this frequency range, is reported on.

Applications of nanotechnology in food packaging and food safety: barrier materials, antimicrobials and sensors.

PubMed

Duncan, Timothy V

2011-11-01

In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term. Published by Elsevier Inc.

Free acquisition and dissemination of data through remote sensing. [Landsat program legal aspects

NASA Technical Reports Server (NTRS)

Hosenball, S. N.

1976-01-01

Free acquisition and dissemination of data through remote sensing is discussed with reference to the Landsat program. The role of the Scientific and Technical Subcommittee of the U.N. General Assembly's Committee on the Peaceful Uses of Outer Space has made recommendations on the expansion of existing ground stations and on the establishment of an experimental center for training in remote sensing. The working group for the legal subcommittee of the same U.N. committee indicates that there are common elements in the three drafts on remote sensing submitted to it: a call for international cooperation and the belief that remote sensing should be conducted for the benefit of all mankind.

Supplementary steam - A viable hydrogen power generation concept

NASA Technical Reports Server (NTRS)

Wright, D. E.; Lee, J. C.

1979-01-01

Technical and economic aspects of a supplementary steam generation for peaking power applications are discussed. Preliminary designs of the hydrogen/oxygen combustors to be used for such applications are described. The integration of the hydrogen/oxygen steam-generating equipment into a typical coal-fired steam station is studied. The basic steam generation system was designed as a 20 MW supplementary system to be added to the existing 160 MW system. An analysis of the operating and design requirements of the supplementary system is conducted. Estimates were made for additional steam and fuel supply lines and for additional control required to operate the combustors and to integrate the combustor system into the facility.

Need for, and financial feasibility of, satellite-aided land mobile communications

NASA Technical Reports Server (NTRS)

Castruccio, P. A.; Marantz, C. S.; Freibaum, J.

1982-01-01

Questions regarding the role of a mobile-satellite system in augmenting the terrestrial communications system are considered, and a market assessment study is discussed. Aspects of an investment analysis are examined, taking into account a three phase financial study of four postulated land Mobile Satellite Service (LMSS) systems, project profitability evaluation methods, risk analysis methods, financial projections, potential investor acceptance standards, and a risk analysis. It is concluded that a satellite augmented terrestrial mobile service appears to be economically and technically superior to a service depending exclusively on terrestrial systems. The interest in the Mobile Satellite Service is found to be worldwide, and the ground equipment market is potentially large.

TECHNICAL AND MEDICAL ASPECTS OF NUCLAR-POWERED AIRPLANES: THE ROLE OF NUCLEAR POWER IN THE ATMOSPHERE AND IN SPACE (in Swedish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

von Ublisch, H.

1961-01-01

An evaluation is given of the merits of potential nuclear propulsion systems for aircraft and rockets as well as of small nuclear power plants for auxiliary use in space exploration. The protection of personnel and passengers against gamma and high-velocity radiation is discussed, and the shielding properties of various materials are analysed. Mobile shielding would be required for airplanes even when landed and the reactor is shut down. No significant pollutton of the atmosphere is expected from leaking reactors, but accidents constitute a real danger. The prospects of realizing the ion motor and the photon motor are speculated upon. (auth)

An overview of the quiet short-haul research aircraft program

NASA Technical Reports Server (NTRS)

Shovlin, M. D.; Cochrane, J. A.

1978-01-01

An overview of the Quiet Short Haul Research Aircraft (QSRA) Program is presented, with special emphasis on its propulsion and acoustic aspects. A description of the NASA technical participation in the program including wind tunnel testing, engine ground tests, and advanced aircraft simulation is given. The aircraft and its systems are described and, measured performance, where available, is compared to program goals. Preliminary data indicate that additional research and development are needed in some areas of which acoustics is an example. Some of these additional research areas and potential experiments using the QSRA to develop the technology are discussed. The concept of the QSRA as a national flight research facility is explained.

Inoue Balloon Mitral Valvotomy in a 4-Year-Old Boy

PubMed Central

Kapoor, Aditya; Moorthy, Nagaraja; Kumar, Sudeep

2012-01-01

Mitral stenosis in children often has a fulminant and rapid course. Percutaneous transvenous mitral commissurotomy is accepted as the treatment of choice for mitral stenosis not only in adults, but also in younger patients who have pliable valves. Balloon mitral valvotomy has yielded good immediate and long-term results. Herein, we report successful Inoue balloon mitral valvotomy in a 4-year-old boy who had severe, symptomatic rheumatic mitral stenosis. To our knowledge, our patient is the youngest to have undergone this procedure. In addition to the case description, we discuss the features of juvenile rheumatic mitral stenosis and several technical aspects of performing the Inoue balloon mitral valvotomy procedure in children. PMID:22412242

Orbiting propellent depot safety. Volume 2: Technical discussion

NASA Technical Reports Server (NTRS)

1971-01-01

The results of a study assessing the gross requirements and concomitant safety hazards associated with the operation of several configurations of orbiting propellant depots (OPD) are presented. The major structural and operational aspects of the integral, semimodular, and modular concepts are described. The concepts are evaluated to determine their safety hazards, and emphasis is placed on propellant transfer to and from the OPD. The study indicates that a modular mode of depot resupply is desirable regardless of the OPD configuration. This resupply mode requires no flow transfer to resupply either the semimodular or modular OPD. Of the three concepts, the semimodular appears to provide the best operational advantage and lowest safety risk.

Technical aspects of pediatric epilepsy surgery: Report of a multicenter, multinational web-based survey by the ILAE Task Force on Pediatric Epilepsy Surgery.

PubMed

Cukiert, Arthur; Rydenhag, Bertil; Harkness, William; Cross, J Helen; Gaillard, William D

2016-02-01

Surgical techniques may vary extensively between centers. We report on a web-based survey aimed at evaluating the current technical approaches in different centers around the world performing epilepsy surgery in children. The intention of the survey was to establish technical standards. A request was made to 88 centers to complete a web-based survey comprising 51 questions. There were 14 questions related to general issues, 13 questions investigating the different technical aspects for children undergoing epilepsy surgery, and 24 questions investigating surgical strategies in pediatric epilepsy surgery. Fifty-two centers covering a wide geographic representation completed the questionnaire. The median number of resective procedures per center per year was 47. Some important technical practices appeared (>80% of the responses) such as the use of prophylactic antibiotics (98%), the use of high-speed drills for bone opening (88%), nonresorbable material for bone flap closure (85%), head fixation (90%), use of the surgical microscope (100%), and of free bone flaps. Other questions, such as the use of drains, electrocorticography (ECoG) and preoperative withdrawal of valproate, led to mixed, inconclusive results. Complications were noted in 3.8% of the patients submitted to cortical resection, 9.9% hemispheric surgery, 5% callosotomy, 1.8% depth electrode implantation, 5.9% subdural grids implantation, 11.9% hypothalamic hamartoma resection, 0.9% vagus nerve stimulation (VNS), and 0.5% deep brain stimulation. There were no major differences across regions or countries in any of the subitems above. The present data offer the first overview of the technical aspects of pediatric epilepsy surgery worldwide. Surprisingly, there seem to be more similarities than differences. That aside many of the evaluated issues should be examined by adequately designed multicenter randomized controlled trials (RCTs). Further knowledge on these technical issues might lead to increased standardization and lower costs in the future, as well as definitive practice guidelines. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

Cell phones: modern man's nemesis?

PubMed

Makker, Kartikeya; Varghese, Alex; Desai, Nisarg R; Mouradi, Rand; Agarwal, Ashok

2009-01-01

Over the past decade, the use of mobile phones has increased significantly. However, with every technological development comes some element of health concern, and cell phones are no exception. Recently, various studies have highlighted the negative effects of cell phone exposure on human health, and concerns about possible hazards related to cell phone exposure have been growing. This is a comprehensive, up-to-the-minute overview of the effects of cell phone exposure on human health. The types of cell phones and cell phone technologies currently used in the world are discussed in an attempt to improve the understanding of the technical aspects, including the effect of cell phone exposure on the cardiovascular system, sleep and cognitive function, as well as localized and general adverse effects, genotoxicity potential, neurohormonal secretion and tumour induction. The proposed mechanisms by which cell phones adversely affect various aspects of human health, and male fertility in particular, are explained, and the emerging molecular techniques and approaches for elucidating the effects of mobile phone radiation on cellular physiology using high-throughput screening techniques, such as metabolomics and microarrays, are discussed. A novel study is described, which is looking at changes in semen parameters, oxidative stress markers and sperm DNA damage in semen samples exposed in vitro to cell phone radiation.

Climate Change and Water Infrastructure in Central Asia: adaptation capacities and institutional challenges

NASA Astrophysics Data System (ADS)

Abdullaev, Iskandar; Rakhmatullaev, Shavkat

2014-05-01

The paper discusses vulnerability areas of water sector in arid Central Asia due to climate change projections with particular focus on adaptation to sustainable operation of physical infrastructure capacities (from legal, institutional and technical aspects). Two types of technical installations are the main focus of this paper, i.e., electrical lift irrigation systems and water reservoirs. The first set of electrical lift infrastructure is strategic for delivering water to water users via pumps, diversion structures, vertical drainage facilities and groundwater boreholes; on the other hand, the primarily task of second set of structures is to accumulate the water resources for sectors of economy. In Central Asia, approximately, 20-50% of irrigation water is lifted, yet major of lift structures are in very poor technical conditions coupled with ever increasing of electricity tariffs. Furthermore, useful volumes capacities of water reservoirs are being severely diminished due to bio-physical geomorphologic processes, improper operational regimes and chronic financing for special in-house sedimentation surveys. Most importantly, the key argument is that irrigation sector should internalize its adaptation efforts, i.e., integrate renewable energy technologies, energy audit programs and lastly design comprehensive investment prioritization processes and programs. Otherwise, water sector will be at great risk for continued provision of fundamental services to the public, food security and industry

Reply to comment by Añel on "Most computational hydrology is not reproducible, so is it really science?"

NASA Astrophysics Data System (ADS)

Hutton, Christopher; Wagener, Thorsten; Freer, Jim; Han, Dawei; Duffy, Chris; Arheimer, Berit

2017-03-01

In this article, we reply to a comment made on our previous commentary regarding reproducibility in computational hydrology. Software licensing and version control of code are important technical aspects of making code and workflows of scientific experiments open and reproducible. However, in our view, it is the cultural change that is the greatest challenge to overcome to achieve reproducible scientific research in computational hydrology. We believe that from changing the culture and attitude among hydrological scientists, details will evolve to cover more (technical) aspects over time.

78 FR 10175 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... patient or provider characteristics, physical environment and layout; technical training and support... practice, and, in particular, the technical aspects of clinicians using the health IT system. The focus...; the extent and adequacy of training or instruction patients received in using the health IT; attitudes...

An Interstate Collaborative Approach to Web-Based Instruction.

ERIC Educational Resources Information Center

Grant, Denise; Bryant, Gay; Gilley, Daryl

This paper documents a collaborative effort between faculty members from Pellissippi State Technical Community College (Tennessee) and Northwestern Technical Institute (Georgia) to create and deliver an online class on medical terminology. The following six aspects of the project are described: (1) the collaborative effort, including the viability…

Evaluating Inundation in Urban Drainage Systems in Tamalanrea District Makassar Based Ecodrainase

NASA Astrophysics Data System (ADS)

Alfidhdha, Rizky; Karnaningroem, Nieke

2018-03-01

Makassar City is one of the major cities in Indonesia with a population of approximately 1.7 million inhabitants, which continues to grow and followed the development of urban infrastructure facilities. The development also resulted in adverse effects on the environment, especially for water catchment area turns into a watertight region resulting changes in surface runoff were greater, especially in the rainy season because the drainage coefficient values are increasing as well. The purpose of this study was to analyze the capacity of the capacity of drainage channels in terms of technical aspects, analyze and formulate efforts to address flooding in a drainage channel system environmentally friendly in terms of environmental aspects, and Calculating the cost and benefit the development of the handling of flooding with a drainage channel system environmentally friendly in terms of financial aspects. The results obtained from the analysis of the technical aspects there are 14 of 41 channel capacity is insufficient accommodation capacity, resulting in the analysis of environmental aspects require 867 infiltration wells, and 3.19 rate of Benefit Cost Ratio (BCR).

16 CFR 0.20 - Office of International Affairs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer protection aspects of trade fora and negotiations, such as the U.S. inter-agency delegations... international antitrust, international consumer protection, and international technical assistance. OIA is... advice to the Bureaus of Competition and Consumer Protection with regard to the international aspects of...

Integrating HCI Specialists into Open Source Software Development Projects

NASA Astrophysics Data System (ADS)

Hedberg, Henrik; Iivari, Netta

Typical open source software (OSS) development projects are organized around technically talented developers, whose communication is based on technical aspects and source code. Decision-making power is gained through proven competence and activity in the project, and non-technical end-user opinions are too many times neglected. In addition, also human-computer interaction (HCI) specialists have encountered difficulties in trying to participate in OSS projects, because there seems to be no clear authority and responsibility for them. In this paper, based on HCI and OSS literature, we introduce an extended OSS development project organization model that adds a new level of communication and roles for attending human aspects of software. The proposed model makes the existence of HCI specialists visible in the projects, and promotes interaction between developers and the HCI specialists in the course of a project.

The NOvA Technical Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayres, D.S.; Drake, G.R.; Goodman, M.C.

Technical Design Report (TDR) describes the preliminary design of the NOvA accelerator upgrades, NOvA detectors, detector halls and detector sites. Compared to the March 2006 and November 2006 NOvA Conceptual Design Reports (CDR), critical value engineering studies have been completed and the alternatives still active in the CDR have been narrowed to achieve a preliminary technical design ready for a Critical Decision 2 review. Many aspects of NOvA described this TDR are complete to a level far beyond a preliminary design. In particular, the access road to the NOvA Far Detector site in Minnesota has an advanced technical design atmore » a level appropriate for a Critical Decision 3a review. Several components of the accelerator upgrade and new neutrino detectors also have advanced technical designs appropriate for a Critical Decision 3a review. Chapter 1 is an Executive Summary with a short description of the NOvA project. Chapter 2 describes how the Fermilab NuMI beam will provide a narrow band beam of neutrinos for NOvA. Chapter 3 gives an updated overview of the scientific basis for the NOvA experiment, focusing on the primary goal to extend the search for {nu}{sub {mu}} {yields} {nu}{sub e} oscillations and measure the sin{sup 2}(2{theta}{sub 13}) parameter. This parameter has not been measured in any previous experiment and NOvA would extend the search by about an order of magnitude beyond the current limit. A secondary goal is to measure the dominant mode oscillation parameters, sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sub 32}{sup 2} to a more precise level than previous experiments. Additional physics goals for NOvA are also discussed. Chapter 4 describes the Scientific Design Criteria which the Fermilab accelerator complex, NOvA detectors and NOvA detector sites must satisfy to meet the physics goals discussed in Chapter 3. Chapter 5 is an overview of the NOvA project. The changes in the design relative to the NOvA CDR are discussed. Chapter 6 summarizes the NOvA design performance relative to the Design Criteria set out in Chapter 4. Chapter 7 presents the Work Breakdown Structure dictionary at Level 3 and the Milestone dictionary. Chapters 8 through 17 then take each Level 2 WBS element of the NOvA project and present each part of the design in more detail than the overview given in Chapter 5. Specific technical design criteria are delineated for each part of the project in addition to the scientific design criteria outlined in Chapter 4. Changes in the design since the NOvA CDR are discussed in detail. The work remaining to bring each part of this preliminary design to a final design is outlined. Appendix A is a guide to other NOvA Project documentation with links to those documents.« less

A risk assessment methodology to evaluate the risk failure of managed aquifer recharge in the Mediterranean Basin

NASA Astrophysics Data System (ADS)

Rodríguez-Escales, Paula; Canelles, Arnau; Sanchez-Vila, Xavier; Folch, Albert; Kurtzman, Daniel; Rossetto, Rudy; Fernández-Escalante, Enrique; Lobo-Ferreira, João-Paulo; Sapiano, Manuel; San-Sebastián, Jon; Schüth, Christoph

2018-06-01

Managed aquifer recharge (MAR) can be affected by many risks. Those risks are related to different technical and non-technical aspects of recharge, like water availability, water quality, legislation, social issues, etc. Many other works have acknowledged risks of this nature theoretically; however, their quantification and definition has not been developed. In this study, the risk definition and quantification has been performed by means of fault trees and probabilistic risk assessment (PRA). We defined a fault tree with 65 basic events applicable to the operation phase. After that, we have applied this methodology to six different managed aquifer recharge sites located in the Mediterranean Basin (Portugal, Spain, Italy, Malta, and Israel). The probabilities of the basic events were defined by expert criteria, based on the knowledge of the different managers of the facilities. From that, we conclude that in all sites, the perception of the expert criteria of the non-technical aspects were as much or even more important than the technical aspects. Regarding the risk results, we observe that the total risk in three of the six sites was equal to or above 0.90. That would mean that the MAR facilities have a risk of failure equal to or higher than 90 % in the period of 2-6 years. The other three sites presented lower risks (75, 29, and 18 % for Malta, Menashe, and Serchio, respectively).

Tinkering and Technical Self-Efficacy of Engineering Students at the Community College

ERIC Educational Resources Information Center

Baker, Dale R.; Wood, Lorelei; Corkins, James; Krause, Stephen

2015-01-01

Self-efficacy in engineering is important because individuals with low self-efficacy have lower levels of achievement and persistence in engineering majors. To examine self-efficacy among community college engineering students, an instrument to specifically measure two important aspects of engineering, tinkering and technical self-efficacy, was…

Chameleon or Phoenix: The Metamorphosis of TAFE.

ERIC Educational Resources Information Center

Anderson, Damon

1998-01-01

Examines aspects of the history of technical and vocational education (TAFE) in Australia: technical education system in Victoria; dissolution of the binary system in higher education; and new instructional discourses and practices shaping TAFE. Speculates on the potential reemergence of the binary system and future prospects for TAFE. (SK)

"Let There Be Light" Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the concept of light through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling behavioral…

Proceedings: International Technical Communication Conference (30th, St. Louis, Missouri, May 1-4, 1983).

ERIC Educational Resources Information Center

Society for Technical Communication, Washington, DC.

Prepared by representatives of government, business, industry, and education, the papers in this compilation deal with a variety of aspects of technical communication. The approximately 150 papers are arranged according to the following categories: advanced technology applications, graphics and production, management and professional development,…

Radioactivity and Man Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the subject of radioactivity and man through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling…

76 FR 6766 - Meeting of the Defense Science Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... Acquisition, Technology & Logistics on scientific and technical matters as they affect the perceived needs of... scientific and technical aspects of specific strategies, tactics, and policies as they may affect the U.S... the DoD Office of General Counsel, has determined in writing that all sessions of these meetings will...

The Job Training and Job Satisfaction Survey Technical Manual

ERIC Educational Resources Information Center

Schmidt, Steven W.

2004-01-01

Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

Cost Effectiveness in Evaluation Technical Assistance: Different Aspects of Measuring Cost and Outcomes.

ERIC Educational Resources Information Center

Estes, Gary D.

The paper focuses on the Title I Evaluation Technical Assistance Centers to illustrate issues of measuring costs and deciding on outcome criteria before promoting "cost-effective" approaches. Effects are illustrated for varying resource allocations among personnel, travel, materials, and phone costs as a function of emphasizing…

The NASA Scientific and Technical Information System: Its scope and coverage

NASA Technical Reports Server (NTRS)

1978-01-01

Subjects of scientific and technical documents considered for inclusion in NASA's information bank are broadly summarized under the various categories used in Scientific and Technical Aerospace Reports and International Aerospace Abstracts. A general definition of each category is followed by a list of the aspects of each subject which are of exhaustive, selective, or negative interest because of their relevance to aerospace science and technology and to other NASA projects.

Streamlining Software Aspects of Certification: Report on the SSAC Survey

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Dorsey, Cheryl A.; Knight, John C.; Leveson, Nancy G.; McCormick, G. Frank

1999-01-01

The aviation system now depends on information technology more than ever before to ensure safety and efficiency. To address concerns about the efficacy of software aspects of the certification process, the Federal Aviation Administration (FAA) began the Streamlining Software Aspects of Certification (SSAC) program. The SSAC technical team was commissioned to gather data, analyze results, and propose recommendations to maximize efficiency and minimize cost and delay, without compromising safety. The technical team conducted two public workshops to identify and prioritize software approval issues, and conducted a survey to validate the most urgent of those issues. The SSAC survey, containing over two hundred questions about the FAA's software approval process, reached over four hundred industry software developers, aircraft manufacturers, and FAA designated engineering representatives. Three hundred people responded. This report presents the SSAC program rationale, survey process, preliminary findings, and recommendations.

Book Review:

NASA Astrophysics Data System (ADS)

Gregory, Ruth

2007-06-01

The study of braneworlds has been an area of intense activity over the past decade, with thousands of papers being written, and many important technical advances being made. This book focuses on a particular aspect of braneworlds, namely perturbative gravity in one specific model: the Randall-Sundrum model. The book starts with an overview of the Randall-Sundrum model, discussing anti-de Sitter (AdS) space and the Israel equations in some detail. It then moves on to discuss cosmological branes, focusing on branes with constant curvature. The book then turns to brane gravity, i.e. what do we, as brane observers, perceive the gravitational interaction to be on the brane as derived from the actual five-dimensional gravitational physics? After a derivation of the general brane equations from the Israel equations, the remainder of the book deals with perturbative gravity. This part of the book is extremely detailed, with calculations given explicitly. Overall, the book is quite pedagogical in style, with the aim being to explain in detail the topics it chooses to cover. While it is not unusual to have books written on current and extremely popular research areas, it is unusual to have calculations written so explicitly. This is both a strength and a weakness of this book. It is a strength because the calculations are presented in a detail that students learning the topic will definitely appreciate; however, the narrow focus of the book also means that it lacks perspective and fails to present the broader context. In choosing to focus on one particular aspect of Randall-Sundrum branes, the book has not managed to communicate why a large number of theorists have worked so intensively on this model. In its early stages, the explicit detail of the Randall-Sundrum model would be extremely useful for a student starting out in this research area. In addition, the calculational detail later in the computation of the graviton propagator on the brane would also be welcome not only for starting researchers in this area, but also any researcher interested in the details of computing more general brane propagators. However, the book must be used with some caution as a guide to Randall-Sundrum theory, as it has a rather unusual perspective on the subject, and does not set it in a broader context. For example, it is well known in brane cosmology that the most general bulk solution contains a black hole, which is not discussed, the book preferring to immediately focus on the case of a pure AdS bulk. There is also no real discussion of how Randall-Sundrum links into string theory or phenomenology. One other problem with the book is that it does not reference the literature appropriately, I woould have expected a more comprehensive and accurate set of references accompanying a book which appears to be aimed at starting researchers in a subject. The later stages of the book, in which the author deals in detail with the normalization of the graviton propagator, are rather involved and technical. A student would find this material rather heavy-going; however, the fine points of the discussion of Green's functions will be of use to those dealing with perturbations around more general branes. In summary, the book is a tightly focused discussion of gravity in maximally symmetric Randall-Sundrum braneworlds. It will be useful as a companion text to starting researchers in the area, and other researchers should also find the more technical discussions of some use. However, one should note that the perspective of the book is somewhat narrow.

High Technology Engineering Services, Inc. fiscal year 1993 and 1994 research and development report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document has been prepared by the Professional Staff of High Technology Engineering Services, Inc. (HTES) for fiscal year (FY) 1993. Work was performed for various aspects of mechanical design and analysis, materials development and properties quantification, nuclear environment performance, and engineering program prioritization. The tasks enumerated in the subcontract, attachment B are: 1. Assist in preparation of final R&D report for SDC detector development. 2. Subcontractor shall make contributions to the development of innovative processes for the manufacture of quasi- isotropic, enhanced thermal conductivity compression molded advanced composite materials. 3. Perform finite element analysis as it relates to themore » Superconducting Super Collider Silicon Tracking System, both mechanical and thermal, of very thin section advanced composite materials. 4. Subcontractor shall perform technical studies, reviews, and assessments of the current program for advanced composites materials processing and testing. 5. Subcontractor shall attend meetings and discussions as directed by MEE-12 technical representative. Unfortunately during the course of FY93, technical and financial challenges prevailed against the aggressive goals set for the program. In point of fact, less than 25% of the contract value was able to be expended due to technical delays and programmatic funding cuts. Also, contracting difficulties with the SSC Lab and financial burdens at Los Alamos totally stopped progress on the subject subcontract during the whole of FY94. This was a great blow to me and the HTES, Inc. technical staff. Despite the negative influences over the years, significant progress was made in materials properties quantification and development of essential research and development documentation. The following brief report and attendant appendices will address these achievements.« less

Impact of Automation on Technical Services.

ERIC Educational Resources Information Center

Rooks, Dana C.; Thompson, Linda L.

1988-01-01

Discusses the impact of automation on library technical services, and the need for library managers to be aware of the issues involved and to plan for future developments. The discussion focuses on the areas of job related concerns of technical staff, organizational structures, recruitment and training, and ergonomic considerations. (CLB)

The impact of nontechnical skills on technical performance in surgery: a systematic review.

PubMed

Hull, Louise; Arora, Sonal; Aggarwal, Rajesh; Darzi, Ara; Vincent, Charles; Sevdalis, Nick

2012-02-01

Failures in nontechnical and teamwork skills frequently lie at the heart of harm and near-misses in the operating room (OR). The purpose of this systematic review was to assess the impact of nontechnical skills on technical performance in surgery. MEDLINE, EMBASE, PsycINFO databases were searched, and 2,041 articles were identified. After limits were applied, 341 articles were retrieved for evaluation. Of these, 28 articles were accepted for this review. Data were extracted from the articles regarding sample population, study design and setting, measures of nontechnical skills and technical performance, study findings, and limitations. Of the 28 articles that met inclusion criteria, 21 articles assessed the impact of surgeons' nontechnical skills on their technical performance. The evidence suggests that receiving feedback and effectively coping with stressful events in the OR has a beneficial impact on certain aspects of technical performance. Conversely, increased levels of fatigue are associated with detriments to surgical skill. One article assessed the impact of anesthesiologists' nontechnical skills on anesthetic technical performance, finding a strong positive correlation between the 2 skill sets. Finally, 6 articles assessed the impact of multiple nontechnical skills of the entire OR team on surgical performance. A strong relationship between teamwork failure and technical error was empirically demonstrated in these studies. Evidence suggests that certain nontechnical aspects of performance can enhance or, if lacking, contribute to deterioration of surgeons' technical performance. The precise extent of this effect remains to be elucidated. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Information technology and hospice palliative care: social, cultural, ethical and technical implications in a rural setting.

PubMed

Kuziemsky, Craig; Jewers, Heather; Appleby, Brenda; Foshay, Neil; Maccaull, Wendy; Miller, Keith; Macdonald, Madonna

2012-01-01

There is a need to better understand the specific settings in which health information technology (HIT) is used and implemented. Factors that will determine the successful implementation of HIT are context-specific and often reside not at the technical level but rather at the process and people level. This paper provides the results of a needs assessment for HIT to support hospice palliative care (HPC) delivery in rural settings. Roundtable discussions using the nominal group technique were done to identify priority issues regarding HIT usage to support rural HPC delivery. Qualitative content analysis was then used to identify sociotechnical themes from the roundtable data. Twenty priority issues were identified at the roundtable session. Content analysis grouped the priority issues into one central theme and five supporting themes to form a sociotechnical framework for patient-centered care in rural settings. There are several sociotechnical themes and associated issues that need to be considered prior to implementing HIT in rural HPC settings. Proactive evaluation of these issues can enhance HIT implementation and also help to make ethical aspects of HIT design more explicit.

Communication skills in diagnostic pathology.

PubMed

Lehr, Hans-Anton; Bosman, Fred T

2016-01-01

Communication is an essential element of good medical practice also in pathology. In contrast to technical or diagnostic skills, communication skills are not easy to define, teach, or assess. Rules almost do not exist. In this paper, which has a rather personal character and cannot be taken as a set of guidelines, important aspects of communication in pathology are explored. This includes what should be communicated to the pathologist on the pathology request form, communication between pathologists during internal (interpathologist) consultation, communication around frozen section diagnoses, modalities of communication of a final diagnosis, with whom and how critical and unexpected findings should be communicated, (in-)adequate routes of communication for pathology diagnoses, who will (or might) receive pathology reports, and what should be communicated and how in case of an error or a technical problem. An earlier more formal description of what the responsibilities are of a pathologist as communicator and as collaborator in a medical team is added in separate tables. The intention of the paper is to stimulate reflection and discussion rather than to formulate strict rules.

Ancient dna from pleistocene fossils: Preservation, recovery, and utility of ancient genetic information for quaternary research

NASA Astrophysics Data System (ADS)

Yang, Hong

Until recently, recovery and analysis of genetic information encoded in ancient DNA sequences from Pleistocene fossils were impossible. Recent advances in molecular biology offered technical tools to obtain ancient DNA sequences from well-preserved Quaternary fossils and opened the possibilities to directly study genetic changes in fossil species to address various biological and paleontological questions. Ancient DNA studies involving Pleistocene fossil material and ancient DNA degradation and preservation in Quaternary deposits are reviewed. The molecular technology applied to isolate, amplify, and sequence ancient DNA is also presented. Authentication of ancient DNA sequences and technical problems associated with modern and ancient DNA contamination are discussed. As illustrated in recent studies on ancient DNA from proboscideans, it is apparent that fossil DNA sequence data can shed light on many aspects of Quaternary research such as systematics and phylogeny. conservation biology, evolutionary theory, molecular taphonomy, and forensic sciences. Improvement of molecular techniques and a better understanding of DNA degradation during fossilization are likely to build on current strengths and to overcome existing problems, making fossil DNA data a unique source of information for Quaternary scientists.

Technical activities of the configuration aeroelasticity branch

NASA Technical Reports Server (NTRS)

Cole, Stanley R. (Editor)

1991-01-01

A number of recent technical activities of the Configuration Aeroelasticity Branch of the NASA Langley Research Center are discussed in detail. The information on the research branch is compiled in twelve separate papers. The first of these topics is a summary of the purpose of the branch, including a full description of the branch and its associated projects and program efforts. The next ten papers cover specific projects and are as follows: Experimental transonic flutter characteristics of supersonic cruise configurations; Aeroelastic effects of spoiler surfaces mounted on a low aspect ratio rectangular wing; Planform curvature effects on flutter of 56 degree swept wing determined in Transonic Dynamics Tunnel (TDT); An introduction to rotorcraft testing in TDT; Rotorcraft vibration reduction research at the TDT; A preliminary study to determine the effects of tip geometry on the flutter of aft swept wings; Aeroelastic models program; NACA 0012 pressure model and test plan; Investigation of the use of extension twist coupling in composite rotor blades; and Improved finite element methods for rotorcraft structures. The final paper describes the primary facility operation by the branch, the Langley TDT.

Genome privacy: challenges, technical approaches to mitigate risk, and ethical considerations in the United States

PubMed Central

Wang, Shuang; Jiang, Xiaoqian; Singh, Siddharth; Marmor, Rebecca; Bonomi, Luca; Fox, Dov; Dow, Michelle; Ohno-Machado, Lucila

2016-01-01

Accessing and integrating human genomic data with phenotypes is important for biomedical research. Making genomic data accessible for research purposes, however, must be handled carefully to avoid leakage of sensitive individual information to unauthorized parties and improper use of data. In this article, we focus on data sharing within the scope of data accessibility for research. Current common practices to gain biomedical data access are strictly rule based, without a clear and quantitative measurement of the risk of privacy breaches. In addition, several types of studies require privacy-preserving linkage of genotype and phenotype information across different locations (e.g., genotypes stored in a sequencing facility and phenotypes stored in an electronic health record) to accelerate discoveries. The computer science community has developed a spectrum of techniques for data privacy and confidentiality protection, many of which have yet to be tested on real-world problems. In this article, we discuss clinical, technical, and ethical aspects of genome data privacy and confidentiality in the United States, as well as potential solutions for privacy-preserving genotype–phenotype linkage in biomedical research. PMID:27681358

Exploring the use of high-fidelity simulation training to enhance clinical skills.

PubMed

Ann Kirkham, Lucy

2018-02-07

The use of interprofessional simulation training to enhance nursing students' performance of technical and non-technical clinical skills is becoming increasingly common. Simulation training can involve the use of role play, virtual reality or patient simulator manikins to replicate clinical scenarios and assess the nursing student's ability to, for example, undertake clinical observations or work as part of a team. Simulation training enables nursing students to practise clinical skills in a safe environment. Effective simulation training requires extensive preparation, and debriefing is necessary following a simulated training session to review any positive or negative aspects of the learning experience. This article discusses a high-fidelity simulated training session that was used to assess a group of third-year nursing students and foundation level 1 medical students. This involved the use of a patient simulator manikin in a scenario that required the collaborative management of a deteriorating patient. ©2018 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Nevada Applied Ecology Information Center: a review of technical information support provided to the Nevada Applied Ecology Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fore, C.S.; Pfuderer, H.A.

The Nevada Applied Ecology Information Center (NAEIC) was established in January 1972 to serve the needs of the Nevada Applied Ecology Group (NAEG) by identifying, collecting, analyzing, and disseminating technical information relevant to NAEG programs. Since its inception, the NAEIC has been active in providing specialized information support to NAEG staff in the following research areas: (1) environmental aspects of the transuranics; (2) historic literature (pre-1962) on plutonium and uranium; (3) cleanup and treatment of radioactively contaminated land; (4) bioenvironmental aspects of europium and rhodium; (5) NAEG contractor reports; and (6) uptake of radioactivity by food crops.

Northern goshawk inventory and monitoring technical guide

Treesearch

B. Woodbridge; C.D. Hargis

2006-01-01

This technical guide provides information on all aspects of inventory and monitoring related to the northern goshawk (Accipiter gentilis) and is to be used by the U.S. Department of Agriculture (USDA) Forest Service consistent with national direction, local priorities, and available funding, and also by interested partners and collaborators. When the protocols...

Increasing Student Achievement: Educators' Guide to Secondary Career & Technical Education Assessment

ERIC Educational Resources Information Center

National Occupational Competency Testing Institute, 2012

2012-01-01

This guide attempts to address an aspect of secondary CTE (Career and Technical Education) that has received little attention; the assessment literacy of educators. School leaders need to go beyond ensuring routine compliance with external and internal regulatory forces to identify ways in which CTE program teachers might better understand…

Potential for cogeneration of heat and electricity in California industry, phase 1

NASA Technical Reports Server (NTRS)

Davis, H. S.; Gurfield, R. M.; Moretti, V. C.; Slonski, M. L.

1978-01-01

Information collected during an industrial survey of 12 selected plants was organized into four categories: technical, economic, environmental, and institutional. The technical aspects of industrial cogeneration are examined on a site-specific basis. The site-specific economics, environmental constraints, and institutional barriers that impact industrial cogeneration will be further investigated.

United States Air Force Training Line Simulator. Final Report.

ERIC Educational Resources Information Center

Nauta, Franz; Pierce, Michael B.

This report describes the technical aspects and potential applications of a computer-based model simulating the flow of airmen through basic training and entry-level technical training. The objective of the simulation is to assess the impacts of alternative recruit classification and training policies under a wide variety of assumptions regarding…

Posters with an artistic flair.

PubMed

Ellerbee, Susan M

2006-01-01

Posters are a popular medium used in the classroom and at conferences. Most published and Internet resources focus on the technical aspects of poster creation. The artist's perspective has rarely been addressed. The author fills that gap by presenting color theory and a balanced appearance as important elements to be considered. Specific technical and artistic considerations are presented.

So You "Gotta" Wear Glasses Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the topic of optics through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling behavioral…

Demonstration and Research Program for Teaching Young String Players. Final Report.

ERIC Educational Resources Information Center

Yarborough, William

This report explains a system for rapidly training beginning students in the technical aspects of playing a stringed instrument. The program also affords them a well-rounded, basic knowledge of music. A "numerical" method of notation and concentrated muscular exercises greatly speeded the technical learning process. The daily coordination of ear…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

ERIC Educational Resources Information Center

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Construction of a Digital Video Library: A Socio-Technical Pilot Study on College Students' Attitudes

ERIC Educational Resources Information Center

Chen, Hsin-Liang; Choi, Gilok

2005-01-01

This study investigates socio-technical aspects of digital video libraries based on college students' learning experiences and perspectives. Forty-one students in biology classes were studied through a survey and individual interviews. Findings are presented by the students' knowledge of computer technology, experiences with AV materials, and…

Final report on technical work accomplished under contract NASw-2953

NASA Technical Reports Server (NTRS)

Fredricks, R. W.

1977-01-01

A report is given on the technical work accomplished in the area of plasma physics. The subjects covered are: (1) oblique whistler instabilities, (2) current-limited electron beam injection, (3) three-dimensional ion sound turbulence, (4) theoretical aspects of sounder antenna operation and (5) whistler modes in bow shock structures.

Lenguaje y Ciencias (Language and Sciences), Vol. 17, No. 2.

ERIC Educational Resources Information Center

Zierer, Ernesto, Ed.

This issue contains three articles in Spanish, with abstracts in English, dealing with the following topics: (1) technical and scientific language; (2) some types of misrenderings by students in translating from English to Spanish and implications for language instruction; and (3) some theoretical aspects of the formation of technical terms in…

Approaches to Technological Update of Vocational/Technical Teachers.

ERIC Educational Resources Information Center

Hamilton, James B.; McElroy, Jack

As part of an effort to address the problem of the technological update of vocational and technical teachers, the National Center for Research in Vocational Education conducted a status study to determine the nature and extent of the problem with respect to institutional level and occupational area. A second aspect of the study dealt with…

Educational Films: Writing, Directing, and Producing for Classroom, Television, and Industry.

ERIC Educational Resources Information Center

Herman, Lewis

Intended for beginning and nonprofessional film makers interested in making the educational film, this book explains the technical aspects of film making, the roles of the specialists responsible for it, the types of film treatments (expository, narrative, and dramatic), and the various types of educational films. Some of the technical aspects…

A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

ERIC Educational Resources Information Center

Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

2012-01-01

Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

Engineer's Needs for Scientific and Technical Information.

ERIC Educational Resources Information Center

David, A., Ed.; And Others

This study has as its main object the formulation of an approach, as global and comprehensive as possible, to the multiple aspects of the engineer's needs for scientific and technical information. The basis of the study is an analysis of the engineer's role, its characteristics, different specialties, levels of training, and categories of…

Parallelization of fine-scale computation in Agile Multiscale Modelling Methodology

NASA Astrophysics Data System (ADS)

Macioł, Piotr; Michalik, Kazimierz

2016-10-01

Nowadays, multiscale modelling of material behavior is an extensively developed area. An important obstacle against its wide application is high computational demands. Among others, the parallelization of multiscale computations is a promising solution. Heterogeneous multiscale models are good candidates for parallelization, since communication between sub-models is limited. In this paper, the possibility of parallelization of multiscale models based on Agile Multiscale Methodology framework is discussed. A sequential, FEM based macroscopic model has been combined with concurrently computed fine-scale models, employing a MatCalc thermodynamic simulator. The main issues, being investigated in this work are: (i) the speed-up of multiscale models with special focus on fine-scale computations and (ii) on decreasing the quality of computations enforced by parallel execution. Speed-up has been evaluated on the basis of Amdahl's law equations. The problem of `delay error', rising from the parallel execution of fine scale sub-models, controlled by the sequential macroscopic sub-model is discussed. Some technical aspects of combining third-party commercial modelling software with an in-house multiscale framework and a MPI library are also discussed.

High-Risk Cardiac Surgery in Patients with Intravenous Drug Abuse and/or Active Hepatitis C or HIV Infection: An Ethical Discussion of Six Cases.

PubMed

Gansera, Laura Sophie; Eszlari, Edgar; Deutsch, Oliver; Eichinger, Walter Benno; Gansera, Brigitte

2016-01-01

To discuss the dilemma of adequate decision making in patients with intravenous drug abuse and recurrent valve prosthesis infections or in patients with positive HIV or hepatitis C status. Ethical, social, and economic considerations, not only in terms of technical feasibility but also in terms of unpromising results and aspects of resources, are discussed. Thoughts are presented about the legitimation of cardiac surgery centers refusing to perform surgery in high-risk patients with HIV or hepatitis C infections. Presentation of six cases for discussion. Three patients were addicted to intravenous drugs and had recurrent prosthetic valve endocarditis, and the other three patients had either paravalvular leakage of a mitral valve prosthesis or acute aortic dissection or coronary artery disease. Five of these patients suffered from HIV/AIDS and infective hepatitis C. Four of these patients were refused by other centers due to high risk or a lack of capacity. All six patients were operated during 2013. Mortality was 17%. Decision making in noncompliant drug addicts with recurrent prosthesis infection and in HIV-positive patients leads beyond surgical challenges to ethical and economic considerations. Georg Thieme Verlag KG Stuttgart · New York.

Gymnastics. Selected Coaching Articles. Officiating Techniques.

ERIC Educational Resources Information Center

Niccollai, Rene, Ed.

This publication is a compilation of articles directed toward providing a better understanding of the various aspects of gymnastics and to promote a greater proficiency among educators, coaches, judges, leaders, and participants of sport programs for girls and women. Articles in the first section cover the technical aspects of gymnastics: (1)…

Unexpected Control Structure Interaction on International Space Station

NASA Technical Reports Server (NTRS)

Gomez, Susan F.; Platonov, Valery; Medina, Elizabeth A.; Borisenko, Alexander; Bogachev, Alexey

2017-01-01

On June 23, 2011, the International Space Station (ISS) was performing a routine 180 degree yaw maneuver in support of a Russian vehicle docking when the on board Russian Segment (RS) software unexpectedly declared two attitude thrusters failed and switched thruster configurations in response to unanticipated ISS dynamic motion. Flight data analysis after the maneuver indicated that higher than predicted structural loads had been induced at various locations on the United States (U.S.) segment of the ISS. Further analysis revealed that the attitude control system was firing thrusters in response to both structural flex and rigid body rates, which resonated the structure and caused high loads and fatigue cycles. It was later determined that the thruster themselves were healthy. The RS software logic, which was intended to react to thruster failures, had instead been heavily influenced by interaction between the control system and structural flex. This paper will discuss the technical aspects of the control structure interaction problem that led to the RS control system firing thrusters in response to structural flex, the factors that led to insufficient preflight analysis of the thruster firings, and the ramifications the event had on the ISS. An immediate consequence included limiting which thrusters could be used for attitude control. This complicated the planning of on-orbit thruster events and necessitated the use of suboptimal thruster configurations that increased propellant usage and caused thruster lifetime usage concerns. In addition to the technical aspects of the problem, the team dynamics and communication shortcomings that led to such an event happening in an environment where extensive analysis is performed in support of human space flight will also be examined. Finally, the technical solution will be presented, which required a multidisciplinary effort between the U.S. and Russian control system engineers and loads and dynamics structural engineers to develop and implement an extensive modification in the RS software logic for ISS attitude control thruster firings.

Environmental Education in Technical and Vocational Education. A Discussion Document for Unesco Training Seminars on the Incorporation of Environmental Education into Technical and Vocational Education. Environmental Education Series 24.

ERIC Educational Resources Information Center

Grabe, Sven

This paper is intended to serve as the basis for discussion of the scope and place of environmental education in technical and vocational education. It is addressed primarily to administrators, curriculum developers, and other active participants in the definition of scope and content of technical and vocational courses. After a brief introduction…

Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors’ Network

PubMed Central

Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Dei Cas, Livio; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; J. Filipiak, Krzysztof; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J. J.; Varga, Albert; Lüscher, Thomas F.

2017-01-01

The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship- emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors’ Network of the European Society of Cardiology. PMID:28630534

Service quality in health care setting.

PubMed

Rashid, Wan Edura Wan; Jusoff, Hj Kamaruzaman

2009-01-01

This paper attempts to explore the concept of service quality in a health care setting. This paper probes the definition of service quality from technical and functional aspects for a better understanding on how consumers evaluate the quality of health care. It adopts the conceptual model of service quality frequently used by the most researchers in the health care sector. The paper also discusses several service quality dimensions and service quality problems in order to provide a more holistic conception of hospital service quality. The paper finds that service quality in health care is very complex as compared to other services because this sector highly involves risk. The paper adds a new perspective towards understanding how the concept of service quality is adopted in a health care setting.

The present and future of nanotechnology in human health care.

PubMed

Sahoo, S K; Parveen, S; Panda, J J

2007-03-01

Nanotechnology is a multidisciplinary field that covers a vast and diverse array of devices derived from engineering, physics, chemistry, and biology. The burgeoning new field of nanotechnology, opened up by rapid advances in science and technology, creates myriad new opportunities for advancing medical science and disease treatment in human health care. Applications of nanotechnology to medicine and physiology imply materials and devices designed to interact with the body at subcellular (i.e., molecular) scales with a high degree of specificity. This can be potentially translated into targeted cellular and tissue-specific clinical applications designed to achieve maximal therapeutic efficacy with minimal side effects. In this review the chief scientific and technical aspects of nanotechnology are introduced, and some of its potential clinical applications are discussed.

Scaffolding the design of accessible eLearning content: a user-centered approach and cognitive perspective.

PubMed

Catarci, Tiziana; De Giovanni, Loredana; Gabrielli, Silvia; Kimani, Stephen; Mirabella, Valeria

2008-08-01

There exist various guidelines for facilitating the design, preparation, and deployment of accessible eLearning applications and contents. However, such guidelines prevalently address accessibility in a rather technical sense, without giving sufficient consideration to the cognitive aspects and issues related to the use of eLearning materials by learners with disabilities. In this paper we describe how a user-centered design process was applied to develop a method and set of guidelines for didactical experts to scaffold their creation of accessible eLearning content, based on a more sound approach to accessibility. The paper also discusses possible design solutions for tools supporting eLearning content authors in the adoption and application of the proposed approach.

Anatomic features involved in technical complexity of partial nephrectomy.

PubMed

Hou, Weibin; Yan, Weigang; Ji, Zhigang

2015-01-01

Nephrometry score systems, including RENAL nephrometry, preoperative aspects and dimensions used for an anatomical classification system, C-index, diameter-axial-polar nephrometry, contact surface area score, calculating resected and ischemized volume, renal tumor invasion index, surgical approach renal ranking score, zonal NePhRO score, and renal pelvic score, have been reviewed. Moreover, salient anatomic features like the perinephric fat and vascular variants also have been discussed. We then extract 7 anatomic characteristics, namely tumor size, spatial location, adjacency, exophytic/endophytic extension, vascular variants, pelvic anatomy, and perinephric fat as important features for partial nephrectomy. For novice surgeons, comprehensive and adequate anatomic consideration may help them in their early clinical practice. Copyright © 2015 Elsevier Inc. All rights reserved.

Cervical pessaries for prevention of spontaneous preterm birth: past, present and future

PubMed Central

Arabin, B; Alfirevic, Z

2013-01-01

This Review describes the rationale for the use of cervical pessaries to prevent spontaneous preterm birth and their gradual introduction into clinical practice, discusses technical aspects of the more commonly used designs and provides guidance for their use and future evaluation. Possible advantages of cervical pessaries include the easy, ‘one-off’ application, good side-effect profile, good patient tolerance and relatively low cost compared with current alternatives. Use of transvaginal sonography to assess cervical length in the second trimester allows much better selection of patients who may benefit from the use of a cervical pessary, but future clinical trials are needed to establish clearly the role of pessaries as a preterm birth prevention strategy worldwide. PMID:23775862

Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors´ Network.

PubMed

Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J J; Varga, Albert; Lüscher, Thomas F

2017-06-01

The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship -emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors´ Network of the European Society of Cardiology.

A CRISPR toolbox to study virus–host interactions

PubMed Central

Puschnik, Andreas S.; Majzoub, Karim; Ooi, Yaw Shin; Carette, Jan E.

2018-01-01

Viruses depend on their hosts to complete their replication cycles; they exploit cellular receptors for entry and hijack cellular functions to replicate their genome, assemble progeny virions and spread. Recently, genome-scale CRISPR–Cas screens have been used to identify host factors that are required for virus replication, including the replication of clinically relevant viruses such as Zika virus, West Nile virus, dengue virus and hepatitis C virus. In this Review, we discuss the technical aspects of genome-scale knockout screens using CRISPR–Cas technology, and we compare these screens with alternative genetic screening technologies. The relative ease of use and reproducibility of CRISPR–Cas make it a powerful tool for probing virus–host interactions and for identifying new antiviral targets. PMID:28420884

Data Sharing: A New Editorial Initiative of the International Committee of Medical Journal Editors. Implications for the Editors´ Network

PubMed Central

Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J.; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J. J.; Varga, Albert; Lüscher, Thomas F.

2017-01-01

The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship - emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors´ Network of the European Society of Cardiology. PMID:28591318

Internet and Advertisement.

PubMed

Moustafa, Khaled

2016-02-01

The Internet has revolutionized the way knowledge is currently produced, stored and disseminated. A few finger clicks on a keyboard can save time and many hours of search in libraries or shopping in stores. Online trademarks with an (e-) prefix such as e-library, e-business, e-health etc., are increasingly part of our daily professional vocabularies. However, the Internet has also produced multiple negative side effects, ranging from an unhealthy dependency to a dehumanization of human relationships. Fraudulent, unethical and scam practices are also flourishing through for example misleading online advertising methods. Some social and professional networks gather users' profiles for selling and advertising purposes, sometimes by making it technically difficult to unsubscribe. Here, I discuss some of these unethical aspects and propose some potential solutions to reduce them.

[Language is not neutral. Commentary about APA style].

PubMed

Delgado Sánchez-Mateos, Juan

2007-05-01

Some basic characteristics, not always explicit, of the editorial style proposed by the American Psychological Association (APA), and from the objections posed by some authors who maintain critical positions towards the use of this style, are reviewed, starting with the work of Madigan, Johnson, and Linton (1995) and the subsequent controversy. Starting with this review, problems related to underlying assumptions of the style, with ethical aspects of research, and with the epistemological positions defended by the different traditions of research are discussed. In the conclusions, a simpler differentiation between the scientific-technical and communicative-practical systems of enquiry is proposed, and an explicit commitment, in the text of the report, to the ethical responsibilities derived from the authorship and the development of the research.

Implementing PEHR: Design and Integration of a Consent Creator Service.

PubMed

Weiss, Nicolas; Aguduri, Lakshmi S; Yüksekogul, Nilay; Schreiweis, Björn; Brandner, Antje; Bronsch, Tobias; Pensold, Peter; Stein, Katharina E; Bergh, Björn; Heinze, Oliver

2016-01-01

Giving the patient full control over his medical data electronically remains one of the most discussed topics in healthcare today. The INFOPAT project in the Rhine-Neckar region focuses on a personal cross-enterprise electronic health record (PEHR) in which the patient plays a major role. Thus, he should be provided with the possibility of granting access to his medical data which could be realized using a consent creator service. This paper presents a user interface concept for such a service as well as aspects for the technical implementation. In addition, a pattern for integrating the service into an existing IHE based infrastructure is shown. These concepts could be further adapted for improving patient empowerment in health care projects.

Bell's "Theorem": loopholes vs. conceptual flaws

NASA Astrophysics Data System (ADS)

Kracklauer, A. F.

2017-12-01

An historical overview and detailed explication of a critical analysis of what has become known as Bell's Theorem to the effect that, it should be impossible to extend Quantum Theory with the addition of local, real variables so as to obtain a version free of the ambiguous and preternatural features of the currently accepted interpretations is presented. The central point on which this critical analysis, due originally to Edwin Jaynes, is that Bell incorrectly applied probabilistic formulas involving conditional probabilities. In addition, mathematical technicalities that have complicated the understanding of the logical or mathematical setting in which current theory and experimentation are embedded, are discussed. Finally, some historical speculations on the sociological environment, in particular misleading aspects, in which recent generations of physicists lived and worked are mentioned.

Computational Aspects of Data Assimilation and the ESMF

NASA Technical Reports Server (NTRS)

daSilva, A.

2003-01-01

The scientific challenge of developing advanced data assimilation applications is a daunting task. Independently developed components may have incompatible interfaces or may be written in different computer languages. The high-performance computer (HPC) platforms required by numerically intensive Earth system applications are complex, varied, rapidly evolving and multi-part systems themselves. Since the market for high-end platforms is relatively small, there is little robust middleware available to buffer the modeler from the difficulties of HPC programming. To complicate matters further, the collaborations required to develop large Earth system applications often span initiatives, institutions and agencies, involve geoscience, software engineering, and computer science communities, and cross national borders.The Earth System Modeling Framework (ESMF) project is a concerted response to these challenges. Its goal is to increase software reuse, interoperability, ease of use and performance in Earth system models through the use of a common software framework, developed in an open manner by leaders in the modeling community. The ESMF addresses the technical and to some extent the cultural - aspects of Earth system modeling, laying the groundwork for addressing the more difficult scientific aspects, such as the physical compatibility of components, in the future. In this talk we will discuss the general philosophy and architecture of the ESMF, focussing on those capabilities useful for developing advanced data assimilation applications.

Reform of China's Technical and Vocational Education in the Transition from a Planned Economy System to a Socialist Market Economy System--A Case Study. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Yu, Zuguang; Zeng, Zida

Since the early 1990s, China's government has followed a socialist market economy system. Accordingly, the technical and vocational education (TVE) should be restructured to meet its needs. Reform of the TVE system has four aspects. First, reform of the planning system includes a move from a central plan of enrollment to planning according to…

Book Review: New Perspectives on Technical Editing

NASA Astrophysics Data System (ADS)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer skills, or do not have a very broad knowledge base. The language fluency of every contributor makes this book a pleasure to read, and this particular volume of Baywood's Technical Communications Series is very well edited. The subject index covers almost 8 two-column pages.

The Five Improvisation "Brains": A Pedagogical Model for Jazz Improvisation at High School and the Undergraduate Level

ERIC Educational Resources Information Center

Monk, Augusto

2012-01-01

The learning of jazz improvisation is often treated as the incorporation of stylistic vocabulary and development of technical dexterity. Although this methodology is effective, considering other aspects of jazz improvisation can make the learning process a more holistic and less technical endeavour. My experience teaching improvisation has led me…

Evaluation of the Industrial Maintenance Program at Caldwell Community College and Technical Institute.

ERIC Educational Resources Information Center

Pipes, V. David

In 1982-83, a study was conducted at Caldwell Community College and Technical Institute to determine whether the objectives of the Industrial Maintenance Program were being met, to measure program success, and to identify aspects needing improvement. Surveys were sent to 30 students who graduated from the program before 1978, yielding a 57%…

Development of Graduates' Attributes in Chemistry within an Open Distance Learning (ODL) Environment: UNISA's Experience

ERIC Educational Resources Information Center

Tafesse, Fikru; Mphahlele, Malose J.

2018-01-01

Discipline-specific knowledge and associated technical skills as well as generic skills have represented distinct and separate aspects of chemical sciences in university studies (linear training). In addition to technical skills gained through laboratory training, employers now require a soft skill set such as strengths in analytical thinking,…

76 FR 21043 - Notice of Public Meeting: Technical Aspects of Mandatory Deposit of Published Electronic Works...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... LIBRARY OF CONGRESS Copyright Office [Docket No. 2011-3] Notice of Public Meeting: Technical... Office, Library of Congress. ACTION: Notice of public meeting. SUMMARY: The U.S. Copyright Office of the Library of Congress will host a public meeting on May 24, 2011, with members of the publishing community...

Psychiatry Ward Specialist, 10-12. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is designed to train students to perform as assistants to professional personnel in the care and treatment of patients in mental health units. It includes basic concepts of human behavior, the aspects of atypical adjustive reactions, the…

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2004-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education over the past 10 years. Standards are seen as a way to achieve better accountability within Career and Technical Education (CTE) systems, and improve their quality as well as…

Tips for a Successful Job Search. PEPNet Tipsheet

ERIC Educational Resources Information Center

PEPNet-Northeast, 2009

2009-01-01

Looking for a job can be a challenging experience. It helps to have a positive attitude and to be well prepared for every aspect of the job search. This tipsheet uses information from the NTID (National Technical Institute for the Deaf) Center on Employment (NCE) at Rochester Institute of Technology/National Technical Institute for the Deaf and…

Criminal Justice. [FasTrak Specialization Integrated Technical and Academic Competency (ITAC).] 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This curriculum for a criminal justice program is designed for students interested in pursuing a future in law enforcement or a related public safety profession. The criminal justice program in the career-technical and adult education center is a two-year curriculum that is divided into these 14 units: orientation; legal aspects; communication…

Teaching and Learning International Survey (TALIS) 2013: U.S. Technical Report. NCES 2015-010

ERIC Educational Resources Information Center

Strizek, Gregory A.; Tourkin, Steve; Erberber, Ebru

2014-01-01

This technical report is designed to provide researchers with an overview of the design and implementation of the Teaching and Learning International Survey (TALIS) 2013. This information is meant to supplement that presented in OECD publications by describing those aspects of TALIS 2013 that are unique to the United States. Chapter 2 provides…

Teaching the "Soft Skills": A Professional Development Curriculum to Enhance the Employability Skills of Business Graduates

ERIC Educational Resources Information Center

Winstead, Ann S.; Adams, Barbara L.; Sillah, Marion Rogers

2009-01-01

Today's business climate requires that management recruits not only know the technical aspects of their jobs, but also possess communication, teambuilding and leadership skills. Most business school curricula, however, focus only on technical skills, and do not address the "soft skills" in a formal setting or on a consistent basis. As…

Interplay among Technical, Socio-Emotional and Personal Factors in Written Feedback Research

ERIC Educational Resources Information Center

Chong, Ivan

2018-01-01

The centrality of written feedback is clearly seen from the proliferation of research in the context of higher education. As an increasingly expanding field in research, the majority of written feedback studies have been interested in investigating the technical aspect of how feedback should be given in order to promote student learning. More…

Inexpensive, Near-Infrared Imaging of Artwork Using a Night-Vision Webcam for Chemistry-of-Art Courses

ERIC Educational Resources Information Center

Smith, Gregory D.; Nunan, Elizabeth; Walker, Claire; Kushel, Dan

2009-01-01

Imaging of artwork is an important aspect of art conservation, technical art history, and art authentication. Many forms of near-infrared (NIR) imaging are used by conservators, archaeologists, forensic scientists, and technical art historians to examine the underdrawings of paintings, to detect damages and restorations, to enhance faded or…

Technical Knowledge and Skills Development in the Informal Sector in Kenya: The Case of Custom Tailors

ERIC Educational Resources Information Center

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-01-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of…

Spitting, Kicking and Stripping: Technical Difficulties Encountered in the Treatment of Deprived Children

ERIC Educational Resources Information Center

Canham, Hamish

2004-01-01

The technical difficulties posed for the child psychotherapist working with children who have themselves experienced violence and abuse are addressed. A distinction is drawn between violence in the service of communicating about such experiences and violence that arises from more perverse aspects of the patient. The therapist's need to pay close…

Application of Communications Satellites to Educational Development. Final Technical Report, September 1, 1969-August 31, 1975.

ERIC Educational Resources Information Center

Morgan, Robert P.

Research is summarized in a brief final report built around a four-section bibliography. The first section lists periodic progress reports and articles which provide an overview of the program, including articles which pertain primarily to educational rather than technical aspects of satellite utilization. Theses carried out in the fields of…

The Data Warehouse: Keeping It Simple. MIT Shares Valuable Lessons Learned from a Successful Data Warehouse Implementation.

ERIC Educational Resources Information Center

Thorne, Scott

2000-01-01

Explains why the data warehouse is important to the Massachusetts Institute of Technology community, describing its basic functions and technical design points; sharing some non-technical aspects of the school's data warehouse implementation that have proved to be important; examining the importance of proper training in a successful warehouse…

Digital Aquifer - Integrating modeling, technical, software and policy aspects to develop a groundwater management tool

NASA Astrophysics Data System (ADS)

Tirupathi, S.; McKenna, S. A.; Fleming, K.; Wambua, M.; Waweru, P.; Ondula, E.

2016-12-01

Groundwater management has traditionally been observed as a study for long term policy measures to ensure that the water resource is sustainable. IBM Research, in association with the World Bank, extended this traditional analysis to include realtime groundwater management by building a context-aware, water rights management and permitting system. As part of this effort, one of the primary objectives was to develop a groundwater flow model that can help the policy makers with a visual overview of the current groundwater distribution. In addition, the system helps the policy makers simulate a range of scenarios and check the sustainability of the groundwater resource in a given region. The system also enables a license provider to check the effect of the introduction of a new well on the existing wells in the domain as well as the groundwater resource in general. This process simplifies how an engineer will determine if a new well should be approved. Distance to the nearest well neighbors and the maximum decreases in water levels of nearby wells are continually assessed and presented as evidence for an engineer to make the final judgment on approving the permit. The system also facilitates updated insights on the amount of groundwater left in an area and provides advice on how water fees should be structured to balance conservation and economic development goals. In this talk, we will discuss the concept of Digital Aquifer, the challenges in integrating modeling, technical and software aspects to develop a management system that helps policy makers and license providers with a robust decision making tool. We will concentrate on the groundwater model developed using the analytic element method that plays a very important role in the decision making aspects. Finally, the efficiency of this system and methodology is shown through a case study in Laguna Province, Philippines, which was done in collaboration with the National Water Resource Board, Philippines and World Bank.

Follow-up of negative MRI-targeted prostate biopsies: when are we missing cancer?

PubMed

Gold, Samuel A; Hale, Graham R; Bloom, Jonathan B; Smith, Clayton P; Rayn, Kareem N; Valera, Vladimir; Wood, Bradford J; Choyke, Peter L; Turkbey, Baris; Pinto, Peter A

2018-05-21

Multiparametric magnetic resonance imaging (mpMRI) has improved clinicians' ability to detect clinically significant prostate cancer (csPCa). Combining or fusing these images with the real-time imaging of transrectal ultrasound (TRUS) allows urologists to better sample lesions with a targeted biopsy (Tbx) leading to the detection of greater rates of csPCa and decreased rates of low-risk PCa. In this review, we evaluate the technical aspects of the mpMRI-guided Tbx procedure to identify possible sources of error and provide clinical context to a negative Tbx. A literature search was conducted of possible reasons for false-negative TBx. This includes discussion on false-positive mpMRI findings, termed "PCa mimics," that may incorrectly suggest high likelihood of csPCa as well as errors during Tbx resulting in inexact image fusion or biopsy needle placement. Despite the strong negative predictive value associated with Tbx, concerns of missed disease often remain, especially with MR-visible lesions. This raises questions about what to do next after a negative Tbx result. Potential sources of error can arise from each step in the targeted biopsy process ranging from "PCa mimics" or technical errors during mpMRI acquisition to failure to properly register MRI and TRUS images on a fusion biopsy platform to technical or anatomic limits on needle placement accuracy. A better understanding of these potential pitfalls in the mpMRI-guided Tbx procedure will aid interpretation of a negative Tbx, identify areas for improving technical proficiency, and improve both physician understanding of negative Tbx and patient-management options.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Garnon, Julien; Department of Interventional Radiology, Nouvel Hôpital Civil

ObjectivesThe purpose of this study is to discuss technical aspects and rationales of magnetic resonance (MR)-guided cryoablation (CA) of Morton’s neuroma (MN); preliminary clinical experience is also retrospectively reviewed.MethodsProcedures were performed under local anaesthesia on an outpatient basis. Lesion size and location, procedural (technical success, procedural time, complications) and clinical outcomes (patient satisfaction according to a four-point scale, residual pain according to a 0–10 visual analogue scale and instances of “stump neuroma”) were assessed via chart review and cross-sectional telephone survey after the 20th case.ResultsTwenty patients (15 female, 5 male; mean age 50.3 years) were included; 24 MN (mean size 12.7 mm)more » were treated. Technical success was 100 %. Mean procedural time was 40.9 ± 10.4 min (range 35–60). One minor complication (superficial cellulitis) was reported (4.2 %). Follow-up (mean 19.7 months) was available for 18/24 MN. Patient satisfaction on a per-lesion basis was as follows: “completely satisfied” in 77.7 %, “satisfied with minor reservations” in 16.6 % and “satisfied with major reservations” in 5.7 % of cases. Mean pain score at last follow-up post-CA was 3.0. No instances of “stump neuroma” were reported.ConclusionsMR-guided CA of MN is a novel therapy which appears technically feasible. Clinical advantages of the procedure are high patient satisfaction, reduced risk of “stump neuroma” syndrome and good patient tolerance on an outpatient basis. Further, prospective studies are needed to confirm these encouraging results.« less

The Natural Hospital Environment: a Socio-Technical-Material perspective.

PubMed

Fernando, Juanita; Dawson, Linda

2014-02-01

This paper introduces two concepts into analyses of information security and hospital-based information systems-- a Socio-Technical-Material theoretical framework and the Natural Hospital Environment. The research is grounded in a review of pertinent literature with previously published Australian (Victoria) case study data to analyse the way clinicians work with privacy and security in their work. The analysis was sorted into thematic categories, providing the basis for the Natural Hospital Environment and Socio-Technical-Material framework theories discussed here. Natural Hospital Environments feature inadequate yet pervasive computer use, aural privacy shortcomings, shared workspace, meagre budgets, complex regulation that hinders training outcomes and out-dated infrastructure and are highly interruptive. Working collaboratively in many cases, participants found ways to avoid or misuse security tools, such as passwords or screensavers for patient care. Workgroup infrastructure was old, architecturally limited, haphazard in some instances, and was less useful than paper handover sheets to ensure the quality of patient care outcomes. Despite valiant efforts by some participants, they were unable to control factors influencing the privacy of patient health information in public hospital settings. Future improvements to hospital-based organisational frameworks for e-health can only be made when there is an improved understanding of the Socio-Technical-Material theoretical framework and Natural Hospital Environment contexts. Aspects within control of clinicians and administrators can be addressed directly although some others are beyond their control. An understanding and acknowledgement of these issues will benefit the management and planning of improved and secure hospital settings. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

1997 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-10-01

The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. Themore » workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.« less

Gender and venture capital decision-making: the effects of technical background and social capital on entrepreneurial evaluations.

PubMed

Tinkler, Justine E; Bunker Whittington, Kjersten; Ku, Manwai C; Davies, Andrea Rees

2015-05-01

Research on gender and workplace decision-making tends to address either supply-side disparities between men's and women's human and social capital, or demand-side differences in the status expectations of women and men workers. In addition, this work often relies on causal inferences drawn from empirical data collected on worker characteristics and their workplace outcomes. In this study, we demonstrate how tangible education and work history credentials - typically associated with supply-side characteristics - work in tandem with cultural beliefs about gender to influence the evaluative process that underlies venture capital decisions made in high-growth, high-tech entrepreneurship. Using an experimental design, we simulate funding decisions by venture capitalists (VCs) for men and women entrepreneurs that differ in technical background and the presence of important social ties. We demonstrate the presence of two distinct aspects of VCs' evaluation: that of the venture and that of the entrepreneur, and find that the gender of the entrepreneur influences evaluations most when the person, rather than the venture, is the target of evaluation. Technical background qualifications moderate the influence of gendered expectations, and women receive more of a payoff than men from having a close contact to the evaluating VC. We discuss the implications for future research on gender and work. Copyright © 2014 Elsevier Inc. All rights reserved.

Why do adults entitled to free or highly subsidized dental services select fully out-of-pocket-paid care?

PubMed

Bayat, Fariborz; Vehkalahti, Miira M; Murtomaa, Heikki; Tala, Heikki

2010-02-01

To investigate patients' reasons for selecting a dental clinic given their choice of free or highly-subsidized dental services. The study was based on cross-sectional data obtained through phone interviews with adults in Tehran, Iran. The present study included those entitled to free or highly-subsidized dental services (n = 726). The data covered the patients' awareness of subsidized dental services and type of dental clinic for their most recent visit and their reasons for selecting that clinic. Awareness of subsidized dental services was dichotomized as being either aware or unaware of such subsidy. The type of clinic was dichotomized as providing either free or highly-subsidized (FHS) or fully out-of-pocket paid (FOP) services. Free format answers about the subjects' reasons for selecting a particular clinic were later sub-grouped as: convenient access, good technical aspects, good interpersonal aspects, low or reasonable fees, recommendation by a friend, and no reason. Socio-demographic status was based on background. Data analysis included the chi-square test and logistic regression model. Of the subjects (n = 726), 60% were women and 58% were under 35 years of age. The subjects' mean age was 33.5 years with no difference by gender (P = 0.24) and the majority had public insurance (91%). Of all the subjects, 60% selected FOP. Good interpersonal aspects were the strongest reason for selecting FOP (OR = 4.6), follow by good technical aspects (OR = 2.3). Those subjects who were unaware of their benefit had 4.6 times the odds of selecting FOP. Despite the opportunity to use highly-subsidized dental services, good interpersonal and good technical aspects lead patients to select private dentists and to pay fully out of pocket.

[The contemporary relationship between work, qualification and recognition: repercussions on the Unified Health System (SUS) workers].

PubMed

Vieira, Monica; Chinelli, Filippina

2013-06-01

This paper discusses the relationship between work, qualification and recognition as it occurs in the field of health today, specifically considering the employability of technical workers in the Unified Health System, the way they perceive the employment relationship with respect to their self-esteem regarding their subjectivities. Based on a review of the relevant literature, the subject is treated in the wider context of ongoing changes in the workplace, which are associated with intensification, flexibility and precariousness of labor relations, with repercussions on the specific aspects mentioned. An attempt is made to establish a critical dialogue with the analytical aspect that emphasizes daily work as a privileged forum for overcoming the contradictions that characterize the field of work and education in the SUS nowadays. The text emphasizes the following issues: analysis of the relationship between work and education from the perspective of the concept of skill; the broadening of the meaning of health work; and a critical evaluation of policies that end up making the workers liable for the quality of services rendered.

Word maturity indices with latent semantic analysis: why, when, and where is Procrustes rotation applied?

PubMed

Jorge-Botana, Guillermo; Olmos, Ricardo; Luzón, José M

2018-01-01

The aim of this paper is to describe and explain one useful computational methodology to model the semantic development of word representation: Word maturity. In particular, the methodology is based on the longitudinal word monitoring created by Kirylev and Landauer using latent semantic analysis for the representation of lexical units. The paper is divided into two parts. First, the steps required to model the development of the meaning of words are explained in detail. We describe the technical and theoretical aspects of each step. Second, we provide a simple example of application of this methodology with some simple tools that can be used by applied researchers. This paper can serve as a user-friendly guide for researchers interested in modeling changes in the semantic representations of words. Some current aspects of the technique and future directions are also discussed. WIREs Cogn Sci 2018, 9:e1457. doi: 10.1002/wcs.1457 This article is categorized under: Computer Science > Natural Language Processing Linguistics > Language Acquisition Psychology > Development and Aging. © 2017 Wiley Periodicals, Inc.

Guide to radioactive waste management literature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houser, B.L.; Holoway, C.F.; Madewell, D.G.

Increased public concern about radioactive waste management has called attention to this aspect of the nuclear fuel cycle. Socio-economic planning and technical development are being undertaken to assure that such wastes will be managed safely. This Guide to Radioactive Waste Management Literature has been compiled to serve scientists, engineers, administrators, legislators, and private citizens by directing them to sources of information on various aspects of the subject. References were selected from about 6000 documents on waste management in the computerized information centers in Oak Ridge. The documents were selected, examined, indexed, and abstracted between 1966-1976 by several knowledgeable indexers, principallymore » at the Nuclear Safety Information Center. The selected references were further indexed and classified into 12 categories. Each category is discussed in enough detail to give some understandng of present technology in various phases of waste management and some appreciation of the attendant issues and problems. The bibliographic part of this guide exists in computerized form in the Health Physics Information System and is available through the Oak Ridge Information Center Complex for searching from remote terminals.« less

Quantum chemical modeling of enzymatic reactions: the case of histone lysine methyltransferase.

PubMed

Georgieva, Polina; Himo, Fahmi

2010-06-01

Quantum chemical cluster models of enzyme active sites are today an important and powerful tool in the study of various aspects of enzymatic reactivity. This methodology has been applied to a wide spectrum of reactions and many important mechanistic problems have been solved. Herein, we report a systematic study of the reaction mechanism of the histone lysine methyltransferase (HKMT) SET7/9 enzyme, which catalyzes the methylation of the N-terminal histone tail of the chromatin structure. In this study, HKMT SET7/9 serves as a representative case to examine the modeling approach for the important class of methyl transfer enzymes. Active site models of different sizes are used to evaluate the methodology. In particular, the dependence of the calculated energies on the model size, the influence of the dielectric medium, and the particular choice of the dielectric constant are discussed. In addition, we examine the validity of some technical aspects, such as geometry optimization in solvent or with a large basis set, and the use of different density functional methods. Copyright 2010 Wiley Periodicals, Inc.

Interpretation of Statistical Data: The Importance of Affective Expressions

ERIC Educational Resources Information Center

Queiroz, Tamires; Monteiro, Carlos; Carvalho, Liliane; François, Karen

2017-01-01

In recent years, research on teaching and learning of statistics emphasized that the interpretation of data is a complex process that involves cognitive and technical aspects. However, it is a human activity that involves also contextual and affective aspects. This view is in line with research on affectivity and cognition. While the affective…

Global Climate Change Pathfinder: A Guide to Information Resources. Second Edition.

ERIC Educational Resources Information Center

Pintozzi, Chestalene; Jones, Douglas E.

This pathfinder is a guide to scientific and technical aspects of global climate change including meteorological and climatological aspects; biological, agricultural, and public policy implications; and the chemical processes involved. Sources are arranged by type of publication and include: (1) 10 reference sources; (2) 12 bibliographies; (3) 44…

Middle Atmosphere Program. Handbook for MAP. Volume 30: International School on Atmospheric Radar

NASA Technical Reports Server (NTRS)

Fukao, Shoichiro (Editor)

1989-01-01

Broad, tutorial coverage is given to the technical and scientific aspects of mesosphere stratosphere troposphere (MST) meteorological radar systems. Control issues, signal processing, atmospheric waves, the historical aspects of radar atmospheric dynamics, incoherent scatter radars, radar echoes, radar targets, and gravity waves are among the topics covered.

Quality assurance aspects of GSR analysis by SEM/EDX: a report of first-hand experiences

NASA Astrophysics Data System (ADS)

Charles, Sebastien; Dehan, Didier; Geusens, Nadia; Nys, Bart

2009-05-01

Like many forensic science labs, the Belgian National Institute of Forensic Science (NICC) is involved in a Quality Assurance program aiming towards an ISO17025 Accreditation. Since last year, a project is underway in the GSR lab to validate the method used in the analysis of GSR samples acquired from the hands of suspects by SEM/EDX. The project is well underway, and is planned to lead to accreditation for this technique by the start of 2010. The presentation will discuss several aspects of the functioning of the lab that have to be addressed when preparing for this accreditation. Some of these issues and problems are so involved that separate sub-projects were defined in order to provide a manageable solution. The following topics will be treated in detail: definition of the scope of the accreditation, the validation of the SEM/EDX method with respect to : accuracy, precision, reproducibility and robustness, and the documentation of the Chain of Custody (CoC) of the samples and their storage. One specific sub-project that will be discussed is the study of contamination monitoring in different relevant locations of the lab. Finally, as we have recently acquired a new microscope, the technical criteria we used in the acquisition study will be presented with a focus on their relevance in a QA context. We feel this discussion is informative, both for labs that are pursuing a formal accreditation in the future, and those that work already in such a context and are in the process of acquiring new equipment.

Integrated Bio-Search: challenges and trends for the integration, search and comprehensive processing of biological information

PubMed Central

2014-01-01

Many efforts exist to design and implement approaches and tools for data capture, integration and analysis in the life sciences. Challenges are not only the heterogeneity, size and distribution of information sources, but also the danger of producing too many solutions for the same problem. Methodological, technological, infrastructural and social aspects appear to be essential for the development of a new generation of best practices and tools. In this paper, we analyse and discuss these aspects from different perspectives, by extending some of the ideas that arose during the NETTAB 2012 Workshop, making reference especially to the European context. First, relevance of using data and software models for the management and analysis of biological data is stressed. Second, some of the most relevant community achievements of the recent years, which should be taken as a starting point for future efforts in this research domain, are presented. Third, some of the main outstanding issues, challenges and trends are analysed. The challenges related to the tendency to fund and create large scale international research infrastructures and public-private partnerships in order to address the complex challenges of data intensive science are especially discussed. The needs and opportunities of Genomic Computing (the integration, search and display of genomic information at a very specific level, e.g. at the level of a single DNA region) are then considered. In the current data and network-driven era, social aspects can become crucial bottlenecks. How these may best be tackled to unleash the technical abilities for effective data integration and validation efforts is then discussed. Especially the apparent lack of incentives for already overwhelmed researchers appears to be a limitation for sharing information and knowledge with other scientists. We point out as well how the bioinformatics market is growing at an unprecedented speed due to the impact that new powerful in silico analysis promises to have on better diagnosis, prognosis, drug discovery and treatment, towards personalized medicine. An open business model for bioinformatics, which appears to be able to reduce undue duplication of efforts and support the increased reuse of valuable data sets, tools and platforms, is finally discussed. PMID:24564249

The U.S. government technical report and the transfer of federally funded aerospace R & D

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

This article discusses the U.S. government technical report and the transfer of federally funded aerospace research and development in a conceptual framework of the federal government as a producer of scientific and technical information. The article summarizes current literature and research and discusses U.S. government technical report use and the importance of using data obtained from the NASA/DoD Aerospace Knowledge Diffusion Research Project. The authors make a case for changing existing U.S. technology policy and present a research agenda for the U.S. government technical report.

Guidelines for Genome-Scale Analysis of Biological Rhythms.

PubMed

Hughes, Michael E; Abruzzi, Katherine C; Allada, Ravi; Anafi, Ron; Arpat, Alaaddin Bulak; Asher, Gad; Baldi, Pierre; de Bekker, Charissa; Bell-Pedersen, Deborah; Blau, Justin; Brown, Steve; Ceriani, M Fernanda; Chen, Zheng; Chiu, Joanna C; Cox, Juergen; Crowell, Alexander M; DeBruyne, Jason P; Dijk, Derk-Jan; DiTacchio, Luciano; Doyle, Francis J; Duffield, Giles E; Dunlap, Jay C; Eckel-Mahan, Kristin; Esser, Karyn A; FitzGerald, Garret A; Forger, Daniel B; Francey, Lauren J; Fu, Ying-Hui; Gachon, Frédéric; Gatfield, David; de Goede, Paul; Golden, Susan S; Green, Carla; Harer, John; Harmer, Stacey; Haspel, Jeff; Hastings, Michael H; Herzel, Hanspeter; Herzog, Erik D; Hoffmann, Christy; Hong, Christian; Hughey, Jacob J; Hurley, Jennifer M; de la Iglesia, Horacio O; Johnson, Carl; Kay, Steve A; Koike, Nobuya; Kornacker, Karl; Kramer, Achim; Lamia, Katja; Leise, Tanya; Lewis, Scott A; Li, Jiajia; Li, Xiaodong; Liu, Andrew C; Loros, Jennifer J; Martino, Tami A; Menet, Jerome S; Merrow, Martha; Millar, Andrew J; Mockler, Todd; Naef, Felix; Nagoshi, Emi; Nitabach, Michael N; Olmedo, Maria; Nusinow, Dmitri A; Ptáček, Louis J; Rand, David; Reddy, Akhilesh B; Robles, Maria S; Roenneberg, Till; Rosbash, Michael; Ruben, Marc D; Rund, Samuel S C; Sancar, Aziz; Sassone-Corsi, Paolo; Sehgal, Amita; Sherrill-Mix, Scott; Skene, Debra J; Storch, Kai-Florian; Takahashi, Joseph S; Ueda, Hiroki R; Wang, Han; Weitz, Charles; Westermark, Pål O; Wijnen, Herman; Xu, Ying; Wu, Gang; Yoo, Seung-Hee; Young, Michael; Zhang, Eric Erquan; Zielinski, Tomasz; Hogenesch, John B

2017-10-01

Genome biology approaches have made enormous contributions to our understanding of biological rhythms, particularly in identifying outputs of the clock, including RNAs, proteins, and metabolites, whose abundance oscillates throughout the day. These methods hold significant promise for future discovery, particularly when combined with computational modeling. However, genome-scale experiments are costly and laborious, yielding "big data" that are conceptually and statistically difficult to analyze. There is no obvious consensus regarding design or analysis. Here we discuss the relevant technical considerations to generate reproducible, statistically sound, and broadly useful genome-scale data. Rather than suggest a set of rigid rules, we aim to codify principles by which investigators, reviewers, and readers of the primary literature can evaluate the suitability of different experimental designs for measuring different aspects of biological rhythms. We introduce CircaInSilico, a web-based application for generating synthetic genome biology data to benchmark statistical methods for studying biological rhythms. Finally, we discuss several unmet analytical needs, including applications to clinical medicine, and suggest productive avenues to address them.

Guidelines for Genome-Scale Analysis of Biological Rhythms

PubMed Central

Hughes, Michael E.; Abruzzi, Katherine C.; Allada, Ravi; Anafi, Ron; Arpat, Alaaddin Bulak; Asher, Gad; Baldi, Pierre; de Bekker, Charissa; Bell-Pedersen, Deborah; Blau, Justin; Brown, Steve; Ceriani, M. Fernanda; Chen, Zheng; Chiu, Joanna C.; Cox, Juergen; Crowell, Alexander M.; DeBruyne, Jason P.; Dijk, Derk-Jan; DiTacchio, Luciano; Doyle, Francis J.; Duffield, Giles E.; Dunlap, Jay C.; Eckel-Mahan, Kristin; Esser, Karyn A.; FitzGerald, Garret A.; Forger, Daniel B.; Francey, Lauren J.; Fu, Ying-Hui; Gachon, Frédéric; Gatfield, David; de Goede, Paul; Golden, Susan S.; Green, Carla; Harer, John; Harmer, Stacey; Haspel, Jeff; Hastings, Michael H.; Herzel, Hanspeter; Herzog, Erik D.; Hoffmann, Christy; Hong, Christian; Hughey, Jacob J.; Hurley, Jennifer M.; de la Iglesia, Horacio O.; Johnson, Carl; Kay, Steve A.; Koike, Nobuya; Kornacker, Karl; Kramer, Achim; Lamia, Katja; Leise, Tanya; Lewis, Scott A.; Li, Jiajia; Li, Xiaodong; Liu, Andrew C.; Loros, Jennifer J.; Martino, Tami A.; Menet, Jerome S.; Merrow, Martha; Millar, Andrew J.; Mockler, Todd; Naef, Felix; Nagoshi, Emi; Nitabach, Michael N.; Olmedo, Maria; Nusinow, Dmitri A.; Ptáček, Louis J.; Rand, David; Reddy, Akhilesh B.; Robles, Maria S.; Roenneberg, Till; Rosbash, Michael; Ruben, Marc D.; Rund, Samuel S.C.; Sancar, Aziz; Sassone-Corsi, Paolo; Sehgal, Amita; Sherrill-Mix, Scott; Skene, Debra J.; Storch, Kai-Florian; Takahashi, Joseph S.; Ueda, Hiroki R.; Wang, Han; Weitz, Charles; Westermark, Pål O.; Wijnen, Herman; Xu, Ying; Wu, Gang; Yoo, Seung-Hee; Young, Michael; Zhang, Eric Erquan; Zielinski, Tomasz; Hogenesch, John B.

2017-01-01

Genome biology approaches have made enormous contributions to our understanding of biological rhythms, particularly in identifying outputs of the clock, including RNAs, proteins, and metabolites, whose abundance oscillates throughout the day. These methods hold significant promise for future discovery, particularly when combined with computational modeling. However, genome-scale experiments are costly and laborious, yielding “big data” that are conceptually and statistically difficult to analyze. There is no obvious consensus regarding design or analysis. Here we discuss the relevant technical considerations to generate reproducible, statistically sound, and broadly useful genome-scale data. Rather than suggest a set of rigid rules, we aim to codify principles by which investigators, reviewers, and readers of the primary literature can evaluate the suitability of different experimental designs for measuring different aspects of biological rhythms. We introduce CircaInSilico, a web-based application for generating synthetic genome biology data to benchmark statistical methods for studying biological rhythms. Finally, we discuss several unmet analytical needs, including applications to clinical medicine, and suggest productive avenues to address them. PMID:29098954

A critical review of principal traffic noise models: Strategies and implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garg, Naveen, E-mail: ngarg@mail.nplindia.ernet.in; Department of Mechanical, Production and Industrial Engineering, Delhi Technological University, Delhi 110042; Maji, Sagar

2014-04-01

The paper presents an exhaustive comparison of principal traffic noise models adopted in recent years in developed nations. The comparison is drawn on the basis of technical attributes including source modelling and sound propagation algorithms. Although the characterization of source in terms of rolling and propulsion noise in conjunction with advanced numerical methods for sound propagation has significantly reduced the uncertainty in traffic noise predictions, the approach followed is quite complex and requires specialized mathematical skills for predictions which is sometimes quite cumbersome for town planners. Also, it is sometimes difficult to follow the best approach when a variety ofmore » solutions have been proposed. This paper critically reviews all these aspects pertaining to the recent models developed and adapted in some countries and also discusses the strategies followed and implications of these models. - Highlights: • Principal traffic noise models developed are reviewed. • Sound propagation algorithms used in traffic noise models are compared. • Implications of models are discussed.« less

High temperature thermal energy storage, including a discussion of TES integrated into power plants

NASA Technical Reports Server (NTRS)

Turner, R. H.

1978-01-01

Storage temperatures of 260 C and above are considered. Basic considerations concerning energy thermal storage are discussed, taking into account general aspects of thermal energy storage, thermal energy storage integrated into power plants, thermal storage techniques and technical considerations, and economic considerations. A description of system concepts is provided, giving attention to a survey of proposed concepts, storage in unpressurized fluids, water storage in pressurized containers, the use of an underground lined cavern for water storage, a submerged thin insulated steel shell under the ocean containing pressurized water, gas passage through solid blocks, a rock bed with liquid heat transport fluid, hollow steel ingots, heat storage in concrete or sand, sand in a fluidized bed, sand poured over pipes, a thermal energy storage heat exchanger, pipes or spheres filled with phase change materials (PCM), macroencapsulated PCM with heat pipe concept for transport fluid, solid PCM removed from heat transfer pipes by moving scrapers, and the direct contact between PCM and transport fluid.

Addressing Criticality in Rare Earth Elements via Permanent Magnets Recycling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nlebedim, I. C.; King, A. H.

Rare earth elements (REEs) are critical for many advanced technologies and are faced with potential supply disruptions. Recycling of permanent magnets (PMs) can be good sources for REEs which can help minimize global dependence on freshly mined REEs, but PMs are rarely recycled. Recycling of PMs has been discussed with respect to improving REEs resource sustainability. Some challenges to be addressed in order to establish industrially deployable technologies for PMs recycling have also been discussed, including profitability, energy efficiency and environmental impacts. Key considerations for promoting circular economy via PMs recycling is proposed with the focus on deciding the targetmore » points in the supply chain at which the recycled products will be inserted. Important technical considerations for recycling different forms of waste PMs, including swarfs, slags, shredded and intact hard disk drives magnets, have been presented. Lastly, the aspects of circular economy considered include reusing magnets, remanufacturing magnets and recovering of REEs from waste PMs.« less

Promoting entrepreneurship among informatics engineering students: insights from a case study

NASA Astrophysics Data System (ADS)

Fernandes, João M.; Afonso, Paulo; Fonte, Victor; Alves, Victor; Ribeiro, António Nestor

2017-01-01

Universities seek to promote entrepreneurship through effective education approaches, which need to be in permanent evolution. Nevertheless, the literature in entrepreneurship education lacks empirical evidence. This article discusses relevant issues related to promoting entrepreneurship in the software field, based on the experience of a 15-European Credit Transfer and Accumulation System course. This course seeks to instil in the students the recognition of the need to reconcile technical and business visions, organisational and commercial aspects, most of which have never been addressed previously. A series of semi-structured interviews made it possible to obtain relevant insights about the teaching-learning process underlying this course and its evolution over a seven-year period. Materials related with this course have been analysed, namely guidelines produced by the teachers and deliverables produced by the students. This article discusses the dimensions that were identified as fundamental for promoting entrepreneurship skills in the field of software, namely teamwork, project engagement, and contact with the market.

Skeletal Muscle Tissue Engineering: Methods to Form Skeletal Myotubes and Their Applications

PubMed Central

Ostrovidov, Serge; Hosseini, Vahid; Ahadian, Samad; Fujie, Toshinori; Parthiban, Selvakumar Prakash; Ramalingam, Murugan; Bae, Hojae; Kaji, Hirokazu

2014-01-01

Skeletal muscle tissue engineering (SMTE) aims to repair or regenerate defective skeletal muscle tissue lost by traumatic injury, tumor ablation, or muscular disease. However, two decades after the introduction of SMTE, the engineering of functional skeletal muscle in the laboratory still remains a great challenge, and numerous techniques for growing functional muscle tissues are constantly being developed. This article reviews the recent findings regarding the methodology and various technical aspects of SMTE, including cell alignment and differentiation. We describe the structure and organization of muscle and discuss the methods for myoblast alignment cultured in vitro. To better understand muscle formation and to enhance the engineering of skeletal muscle, we also address the molecular basics of myogenesis and discuss different methods to induce myoblast differentiation into myotubes. We then provide an overview of different coculture systems involving skeletal muscle cells, and highlight major applications of engineered skeletal muscle tissues. Finally, potential challenges and future research directions for SMTE are outlined. PMID:24320971

Redox-Flow Batteries: From Metals to Organic Redox-Active Materials.

PubMed

Winsberg, Jan; Hagemann, Tino; Janoschka, Tobias; Hager, Martin D; Schubert, Ulrich S

2017-01-16

Research on redox-flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of "green", safe, and cost-efficient energy storage, research has shifted from metal-based materials to organic active materials in recent years. This Review presents an overview of various flow-battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox-active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted. © 2016 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Addressing Criticality in Rare Earth Elements via Permanent Magnets Recycling

DOE PAGES

Nlebedim, I. C.; King, A. H.

2017-12-12

Rare earth elements (REEs) are critical for many advanced technologies and are faced with potential supply disruptions. Recycling of permanent magnets (PMs) can be good sources for REEs which can help minimize global dependence on freshly mined REEs, but PMs are rarely recycled. Recycling of PMs has been discussed with respect to improving REEs resource sustainability. Some challenges to be addressed in order to establish industrially deployable technologies for PMs recycling have also been discussed, including profitability, energy efficiency and environmental impacts. Key considerations for promoting circular economy via PMs recycling is proposed with the focus on deciding the targetmore » points in the supply chain at which the recycled products will be inserted. Important technical considerations for recycling different forms of waste PMs, including swarfs, slags, shredded and intact hard disk drives magnets, have been presented. Lastly, the aspects of circular economy considered include reusing magnets, remanufacturing magnets and recovering of REEs from waste PMs.« less

Mobile satellite services: A survey of business needs

NASA Astrophysics Data System (ADS)

Hainzer, Eric M.

Conceptualizing and understanding the international business traveler's communication requirements by the use of a survey and selection of a mobile satellite system that satisfies those requirements are discussed. Chapter 5 incorporates an in depth analysis of the respondent's answers to survey questions and graphing them with frequency distribution histograms. Chapter 6 concludes with a selection of the most likely MSS manufacturer who appears to satisfy those communication requirements discovered in the previous chapter. Following a general-introduction in Chapter 1, the current climate of mobile satellite system (MSS) providers is discussed in Chapter 2. Chapter 3 assesses the implication of launch vehicles as it pertains to the political, technical, and financial aspects of MSS manufacturers and users. Special attention is provided, when possible, between the political environment and its relationship with forefront technology. In chapter 4, the procedure that was used to create the survey and its research methodology is shown. Graphs and charts are used, where appropriate, for the purpose of clarity and readability.

Deep silicon etching: current capabilities and future directions

NASA Astrophysics Data System (ADS)

Westerman, Russ; Martinez, Linnell; Pays-Volard, David; Mackenzie, Ken; Lazerand, Thierry

2014-03-01

Deep Reactive Ion Etching (DRIE) has revolutionized a wide variety of MEMS applications since its inception nearly two decades ago. The DRIE technology has been largely responsible for allowing lab scale technology demonstrations to become manufacturable and profitable consumer products. As applications which utilize DRIE technologies continue to expand and evolve, they continue to spawn a range of new requirements and open up exciting opportunities for advancement of DRIE. This paper will examine a number of current and emerging DRIE applications including nanotechnology, and DRIE related packaging technologies such as Through Silicon Via (TSV) and plasma dicing. The paper will discuss a number of technical challenges and solutions associated with these applications including: feature profile control at high aspect ratios, causes and elimination of feature tilt/skew, process options for fragile device structures, and problems associated with through substrate etching. The paper will close with a short discussion around the challenges of implementing DRIE in production environments as well as looking at potentially disruptive enhancements / substitutions for DRIE.

Introducing future engineers to sustainable ecology problems: a case study

NASA Astrophysics Data System (ADS)

Filipkowski, A.

2011-12-01

The problem of Earth environmental destruction by human activities is becoming dangerous. Engineers responsible for the production of any goods should be well aware of the negative influence of their activities on the state of the planet. This is why the understanding of ecological problems is essential for people responsible for production and industrial design. The energy, which they consume, is increasing the greenhouse effect and the waste poisons the environment. So far, most courses on ecology are offered to specialists in environmental engineering. These courses are filled with many details. The Warsaw Academy of Computer Science, Management and Administration teaches students in the direction of management and production engineering. Upon completion, the students receive the degree of 'engineer'. Their future work will mainly concern management of different types of industrial enterprises and they will be responsible for organising it in such a way as to avoid a dangerous contribution to environmental pollution and climate change. This is why it was decided to introduce a new course entitled 'Principles of Ecology and Environmental Management'. This course is quite broad, concerning almost all technical, law and organisational aspects of the problem. The presentation is made in a spectacular way, aiming to convince students that their future activity must be environmentally friendly. It contains information about international activities in ecology, legal aspects concerning pollution, technical and information methods of monitoring and, finally, the description of 'green' solutions. Altogether, 27 hours of lectures and 15 hours of discussions and students' presentations complete the course. Details of this course are described in this paper.

Neuroimaging findings with MDMA/ecstasy: technical aspects, conceptual issues and future prospects.

PubMed

Reneman, Liesbeth; de Win, Maartje M L; van den Brink, Wim; Booij, Jan; den Heeten, Gerard J

2006-03-01

Users of ecstasy (3,4-methylenedioxymethamphetamine; MDMA) may be at risk of developing MDMA-induced injury to the serotonin (5-HT) system. Previously, there were no methods available for directly evaluating the neurotoxic effects of MDMA in the living human brain. However, development of in vivoneuroimaging tools have begun to provide insights into the effects of ecstasy on the human brain. Single photon emission computed tomography (SPECT), positron emission computed tomography (PET) and proton magnetic resonance spectroscopy (1H-MRS) studies which have evaluated ecstasy's neurotoxic potential will be reviewed and discussed in terms of technical aspects, conceptual issues and future prospects. Although PET and SPECT may be limited by several factors such as the low cortical uptake and the use of a non-optimal reference region (cerebellum) the few studies conducted so far provide suggestive evidence that people who heavily use ecstasy are at risk of developing subcortical, and probably also cortical reductions in serotonin transporter (SERT) densities, a marker of 5-HT neurotoxicity. There seem to be dose-dependent and transient reductions in SERT for which females may be more vulnerable than males. 1H-MRS appears to be a less sensitive technique for studying ecstasy's neurotoxic potential. Whether individuals with a relatively low ecstasy exposure also demonstrate loss of SERT needs to be determined. Because most studies have had a retrospective design, in which evidence is indirect and differs in the degree to which any causal links can be implied, longitudinal studies in human ecstasy users are needed to draw definite conclusions.

Chances of short-term cooling trends over Canada for the next decades

NASA Astrophysics Data System (ADS)

Grenier, Patrick; de Elia, Ramon; Chaumont, Diane

2014-05-01

As climate services continue to develop in Quebec, Canada, an increasing number of requests are made for providing information relevant for the near term. As a response, one approach has been to consider short-term cooling trends as a basis for climate products. This project comprises different aspects: technical steps, knowledge transfer, and societal use. Each step does represent a different challenge. The technical part, i.e. producing probabilistic distributions of short-term temperature trends, involves relatively complex scenario construction methods including bias-related post-processing, and access to wide simulation and observation databases. Calculations are performed on 60 CMIP5-based scenarios on a grid covering Canada during the period 2006-2035, and for 5, 10, 15, 20 and 25-year trend durations. Knowledge transfer implies overcoming misinterpretation, given that probabilistic projections based on simulation ensembles are not perfectly related to real-Earth possible outcomes. Finally, societal use of this information remains the biggest challenge. On the one hand, users clearly state their interest in near-term relevant information, and intuitively it seems clear that short-term cooling trends embedded within the long-term warming path should be considered in adaptation plans, for avoiding over-adaptation. On the other hand, the exact way of incorporating such information within a decision-making process has proven not to be obvious. Irrespective of that, the study and communication of short-term cooling chances is necessary for preventing decision-makers to infer from the eventual occurrence of such a trend that global warming isn't happening. The presentation will discuss the three aspects aforementioned.

[Investigation on pattern and methods of quality control for Chinese materia medica based on dao-di herbs and bioassay - bioassay for Coptis chinensis].

PubMed

Yan, Dan; Xiao, Xiao-he

2011-05-01

Establishment of bioassay methods is the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis Franch. as an example, the establishment process and application of the bioassay methods (including bio-potency and bio-activity fingerprint) were explained from the aspects of methodology, principle of selection, experimental design, method confirmation and data analysis. The common technologies were extracted and formed with the above aspects, so as to provide technical support for constructing pattern and method of the quality control for Chinese materia medica based on the dao-di herbs and bioassay.

Tutorial: Magnetic resonance with nitrogen-vacancy centers in diamond—microwave engineering, materials science, and magnetometry

NASA Astrophysics Data System (ADS)

Abe, Eisuke; Sasaki, Kento

2018-04-01

This tutorial article provides a concise and pedagogical overview on negatively charged nitrogen-vacancy (NV) centers in diamond. The research on the NV centers has attracted enormous attention for its application to quantum sensing, encompassing the areas of not only physics and applied physics but also chemistry, biology, and life sciences. Nonetheless, its key technical aspects can be understood from the viewpoint of magnetic resonance. We focus on three facets of this ever-expanding research field, to which our viewpoint is especially relevant: microwave engineering, materials science, and magnetometry. In explaining these aspects, we provide a technical basis and up-to-date technologies for research on the NV centers.

7 CFR 614.7 - Preliminary technical determinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Preliminary technical determinations. 614.7 Section... Preliminary technical determinations. (a) A preliminary technical determination becomes final 30 days after... purpose of gathering additional information and discussing the facts relating to the preliminary technical...

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

WE-E-213AB-01: Medical Physics Challenges for Implementation of New Technologies in External Beam Radiotherapy.

PubMed

Boiras, C; Bourland, J; Gonzalez, L Brualla; Bulychkin, P; Ford, E; Kazantsev, P; Krylova, T; Medina, A Lopez; Prusova, M; Romanov, D; Ferrando, J Rosello; Willoughby, T; Yan, D; Yu, C; Zvereva, A

2012-06-01

The AAPM has signed two formal Educational Exchange Agreements with the Spanish (SEFM) and the Russian (AMPR) medical physics societies. While the primary purpose of the Agreements is to provide educational opportunities for young medical physicists, the Agreements also contemplate holding joint sessions at scientific congresses. The purpose of this professional AAPM/SEFM/AMPR Joint Symposium is to explore the challenges that medical physicists in the three countries face when new external beam radiotherapy technologies are introduced in their facilities and to suggest potential solutions to limitations in testing equipment and lack of familiarity with protocols. Speakers from the three societies will present reviews of the technical aspects of IMRT, Arc EVIRT (IMAT/VMAT/Rapid Arc), SRS/SRBT, and IGRT/Adaptive radiotherapy, and will describe the status of these technologies in their countries, including the challenges found in tasks such as developing anatomical and biological dose optimization techniques and implementing QA management, risk assessment and patient safety programs. The SEFM will offer AAPM and AMPR members the possibility to participate in collaborative proposals for future research bids in UE and USA based on an ongoing Spanish project for adaptive radiotherapy using functional imaging. A targeted discussion will debate three propositions: the cost/benefit ratio of IGRT, whether IMRT requires IGRT, and the use of non-ionizing radiation technologies for realtime monitoring of prostate IGRT. For these debates, each society has designated one speaker to present and defend either "For" or "Against" the proposition, followed by discussion by all participants. The Symposium presentations and the country-tailored recommendations drawn will be made available to each society for inclusion in their websites. The WGNIMP, the AAPM Work Group charged with executing the AAPM/SEFM and AAPM/AMPR Agreements, will follow up on the commitments made by the AAPM.Di Yan's research on adaptive radiotherapy has been financially supported by: 1) NIH Research Grants, 2) Elekta Research Grants 3) Philips Research GrantConflicts of interest for Cedric X Yu: 1) Board Member of Prowess, Inc., 2) Shareholder of Xcision Medical Systems, LLC, 3) Inventor on patents licensed by Varian Medical Systems, Inc. 1. Describe fundamental aspects for four advanced radiotherapy techniques: IMRT, IGRT, SBRT, and adaptive radiotherapy. 2. Review technical and professional challenges for implementation of advanced techniques as a function of resources and capabilities available within each scientific society: AAPM, SEFM, and AMPR. 3. Discuss and plan a proposal for an international trial on IMRT/IGRT based on functional imaging. 4. Debate important implementation aspects of IMRT and IGRT according to country-specific resources. © 2012 American Association of Physicists in Medicine.

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Technical Subjects in Secondary Schools

ERIC Educational Resources Information Center

Howard, A. E.

2008-01-01

Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

Report Writing for Technical Staff. P.R.I.D.E. People Retraining for Industry Excellence.

ERIC Educational Resources Information Center

Burt, Lorna

This guide, part of a series of workplace-developed materials for retraining factory workers, provides teaching materials for a workplace course in report writing skills for technical staff. The course has been designed to help new engineers with all aspects of report writing. It covers the outline and structure of reports, brainstorming,…

Conclusions, Research Needs, and Recommendations of the Expert Panel: Technical Workshop on Human Milk Surveillance and Research for Environmental Chemicals in the U.S.

EPA Science Inventory

Proceedings of "The Technical Workshop on Human Milk Surveillance and Research on Environmental Chemicals in the United States" was organized to develop state-of-the-science protocols describing the various aspects of such a program. The 2-day workshop was held at the Mi...

Teaching Technical Writing and Editing -- In-House Programs That Work. Anthology Series No. 5.

ERIC Educational Resources Information Center

Shaw, James G., Ed.

The 12 articles in this publication provide indepth treatment of important aspects of in-house training programs for technical writing and editing. The articles deal with the following topics: the value of an in-house writing course, teaching in industry, developing an in-house writing course for engineers and scientists, a new approach to…

Technical Cooperation with Iran: A Case Study of Opportunities and Policy Implications for the United States. Report to the Agency for International Development.

ERIC Educational Resources Information Center

Agency for International Development (Dept. of State), Washington, DC.

This report concerns aspects of the United States' changing policies for providing economic and technical assistance to developing nations. Of primary importance in a review of relationships with those rapidly developing nations no longer eligible for concessional assistance from the Agency for International Development (AID) are the possible…

Convergence Properties of a Class of Probabilistic Adaptive Schemes Called Sequential Reproductive Plans. Psychology and Education Series, Technical Report No. 210.

ERIC Educational Resources Information Center

Martin, Nancy

Presented is a technical report concerning the use of a mathematical model describing certain aspects of the duplication and selection processes in natural genetic adaptation. This reproductive plan/model occurs in artificial genetics (the use of ideas from genetics to develop general problem solving techniques for computers). The reproductive…

Modelling the Reasons for Training Choices: Technical Paper. Support Document

ERIC Educational Resources Information Center

Smith, Andrew; Oczkowski, Eddie; Hill, Mark

2009-01-01

This report provides the technical details on the modelling aspects of identifying significant drivers for the reasons for using certain types of training and for the choice of training types. The employed data is from the 2005 Survey of Employer Use and Views of the VET system (SEUV). The data has previously been analysed in NCVER (2006). This…

Components Needed for the Design of a Sustainable Career and Technical Education Program

ERIC Educational Resources Information Center

Lassiter, Vann Mizzelle

2012-01-01

As education has changed to meet the needs of society and has been shaped by the enactment of new laws, various aspects included under the massive umbrella of education have also changed to maintain momentum One such educational program is career and technical education (CTE). Changes to CTE have been made to continually meet the needs of all…

The Development of Sensitivity to Figural and Stylistic Aspects of Paintings. Technical Report No. 3.

ERIC Educational Resources Information Center

Gardner, Howard E.

Harvard Project Zero provides a series of technical research reports which study artistic creation and comprehension as a means toward better art education. The emphasis of the research is to improve art education through a better psychological understanding of symbol systems and media of art and through better understanding of the perceptual,…

Basic Concepts and Definitions for Privacy and Confidentiality in Student Education Records. SLDS Technical Brief 1. NCES 2011-601

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The National Center for Education Statistics (NCES) is launching a new series of Technical Briefs on various aspects of the protection of personally identifiable information in students' education records. While driven by recent events, the principles and practices that are outlined in this series can be applied more generally to personally…

Enterprise Planning for Change; Co-ordination of Manpower and Technical Planning. Industrial Relations Aspects of Manpower Policy, No. 5.

ERIC Educational Resources Information Center

Wedderburn, Dorothy

Forty case studies made by research teams of independents or governmental agencies in Austria, Canada, France, Germany, Norway, Sweden, United Kingdom, and the United States were analyzed to provide managements and trade unions with illustrations of present systems of technical and manpower changes at the enterprise level and to describe the…

Communicating to Influence Drug Development and Regulatory Decisions: A Tutorial

PubMed Central

Mehrotra, S

2016-01-01

Pharmacometricians require three skills to be influential: technical, business (e.g., drug development), and soft skills (e.g., communication). Effective communication is required to translate technical and often complicated quantitative findings to interdisciplinary team members in order to influence drug development or regulatory decisions. In this tutorial, we highlight important aspects related to communicating pharmacometric analysis to influence decisions. PMID:27299706

Meeting Report: Threats to Human Health and Environmental Sustainability in the Pacific Basin

PubMed Central

Arnold, Robert G.; Carpenter, David O.; Kirk, Donald; Koh, David; Armour, Margaret-Ann; Cebrian, Mariano; Cifuentes, Luis; Khwaja, Mahmood; Ling, Bo; Makalinao, Irma; Paz-y-Miño, César; Peralta, Genandrialine; Prasad, Rajendra; Singh, Kirpal; Sly, Peter; Tohyama, Chiharu; Woodward, Alistair; Zheng, Baoshan; Maiden, Todd

2007-01-01

The coastal zone of the Pacific Rim is home for about one-third of the world’s population. Disproportionate growth of Far Eastern economies has produced a disproportionate share of related environmental difficulties. As the region searches for acceptable compromises between growth and environmental quality, its influence on global environmental health is certain to increase. Consequences of global environmental change such as habitat alteration, storms, and sealevel rise will be particularly acute among Pacific Rim nations. Adverse health effects from arsenic exposure in Pacific Rim nations have been used to justify drinking water standards in the United States and elsewhere. As global manufacturing in the Pacific Rim increases, the centroid of global air quality and waste management issues will shift further toward Far Eastern nations. The Eleventh International Conference of the Pacific Basin Consortium (PBC) was held in September 2005 in Honolulu, Hawaii. The purpose of the conference was to bring together individuals to discuss regional challenges to sustainable growth. The historic emphasis of the conference on hazardous wastes in relation to human health makes the PBC an ideal forum for discussing technical aspects of sustainable economic growth in the Pacific region. That role is reflected in the 2005 PBC conference themes, which included management of arsenic in potable waters, air quality, climate change, pesticides, mercury, and electronics industry waste—each with emphasis on relationships to human health. Arsenic management exemplifies the manner in which the PBC can focus interdisciplinary discussion in a single technical area. The conference program provided talks on arsenic toxicology, treatment technologies, management of arsenic-bearing residuals from water treatment, and the probable societal costs and benefits of arsenic management. PMID:18087598

Shiatsu and Acupressure: Two Different and Distinct Techniques

PubMed Central

Cabo, Fernando; Baskwill, Amanda; Aguaristi, Isaac; Christophe-Tchakaloff, Slava; Guichard, Jean-Philippe

2018-01-01

Background Although shiatsu has been taught in specialized schools in Japan since 1940, there is a limited amount of research for its practice. As a result, authors substitute shiatsu with acupressure to use available research on acupressure. It is the position of the authors that, while the two share common aspects, they are substantively different. This project was undertaken to describe technical differences and advocate for a clear distinction, especially in research studies and academic discussions. Methods To understand whether it is appropriate to include acupressure studies in the evidence for shiatsu an analysis of the references included in a frequently cited systematic review was conducted to collect information about the protocols. In addition, a preliminary exploration of shiatsu practitioners’ perceptions about the differences between shiatsu and acupressure is described. This exploration used videos of shiatsu and acupressure techniques and asked practitioners to comment on their perception of similarity. Discussion The results identified several key technical differences between the two, including type of pressure applied, the positioning of the thumb, and the way in which body weight is used. Researchers should separate shiatsu and acupressure in their designs and purposively choose one or the other. To facilitate such clarification, we have proposed a definition for shiatsu that may facilitate the differentiation between these two techniques. Conclusion The authors hope to stimulate discussion about the differences between shiatsu and acupressure, and to question the appropriateness of using acupressure studies as evidence of the efficacy of shiatsu. A true understanding of the efficacy of shiatsu cannot be determined until studies use a common definition of shiatsu and discontinue substituting acupressure research for evidence of shiatsu efficacy. When this happens, it is proposed that a clearer picture of the safety, efficacy, and mechanism of action of both shiatsu and acupressure will emerge. PMID:29881477

Meeting report: threats to human health and environmental sustainability in the pacific basin.

PubMed

Arnold, Robert G; Carpenter, David O; Kirk, Donald; Koh, David; Armour, Margaret-Ann; Cebrian, Mariano; Cifuentes, Luis; Khwaja, Mahmood; Ling, Bo; Makalinao, Irma; Paz-Y-Miño, César; Peralta, Genandrialine; Prasad, Rajendra; Singh, Kirpal; Sly, Peter; Tohyama, Chiharu; Woodward, Alistair; Zheng, Baoshan; Maiden, Todd

2007-12-01

The coastal zone of the Pacific Rim is home for about one-third of the world's population. Disproportionate growth of Far Eastern economies has produced a disproportionate share of related environmental difficulties. As the region searches for acceptable compromises between growth and environmental quality, its influence on global environmental health is certain to increase. Consequences of global environmental change such as habitat alteration, storms, and sea level rise will be particularly acute among Pacific Rim nations. Adverse health effects from arsenic exposure in Pacific Rim nations have been used to justify drinking water standards in the United States and elsewhere. As global manufacturing in the Pacific Rim increases, the centroid of global air quality and waste management issues will shift further toward Far Eastern nations. The Eleventh International Conference of the Pacific Basin Consortium (PBC) was held in September 2005 in Honolulu, Hawaii. The purpose of the conference was to bring together individuals to discuss regional challenges to sustainable growth. The historic emphasis of the conference on hazardous wastes in relation to human health makes the PBC an ideal forum for discussing technical aspects of sustainable economic growth in the Pacific region. That role is reflected in the 2005 PBC conference themes, which included management of arsenic in potable waters, air quality, climate change, pesticides, mercury, and electronics industry waste-each with emphasis on relationships to human health. Arsenic management exemplifies the manner in which the PBC can focus interdisciplinary discussion in a single technical area. The conference program provided talks on arsenic toxicology, treatment technologies, management of arsenic-bearing residuals from water treatment, and the probable societal costs and benefits of arsenic management.

NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 29: The US government technical report and the transfer of federally funded aerospace R and D

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

This article discusses the U.S. government technical report and the transfer of federally funded aerospace research and development in a conceptual framework of the federal government as a producer of scientific and technical information. The article summarizes current literature and research and discusses U.S. government technical report use and the importance of using data obtained from the NASA/DoD Aerospace Knowledge Diffusion Research Project. The authors make a case for changing existing U.S. technology policy and present a research agenda for the U.S. government technical report.

Student and Staff Perceptions of Key Aspects of Computer Science Engineering Capstone Projects

ERIC Educational Resources Information Center

Olarte, Juan José; Dominguez, César; Jaime, Arturo; Garcia-Izquierdo, Francisco José

2016-01-01

In carrying out their capstone projects, students use knowledge and skills acquired throughout their degree program to create a product or provide a technical service. An assigned advisor guides the students and supervises the work, and a committee assesses the projects. This study compares student and staff perceptions of key aspects of…

Technical Guidance from the International Safety Framework for Nuclear Power Source Applications in Outer Space for Design and Development Phases

NASA Astrophysics Data System (ADS)

Summerer, Leopold

2014-08-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space [1] has been adopted, following a multi-year process that involved all major space faring nations in the frame of the International Atomic Energy Agency and the UN Committee on the Peaceful Uses of Outer Space. The safety framework reflects an international consensus on best practices. After the older 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second document at UN level dedicated entirely to space nuclear power sources.This paper analyses aspects of the safety framework relevant for the design and development phases of space nuclear power sources. While early publications have started analysing the legal aspects of the safety framework, its technical guidance has not yet been subject to scholarly articles. The present paper therefore focuses on the technical guidance provided in the safety framework, in an attempt to assist engineers and practitioners to benefit from these.

Comparison of two text message (mHealth) campaigns for the Deaf: Contracted out v. conducted in-house.

PubMed

Hacking, Damian; Lau, Yan Kwan; Haricharan, Hanne Jensen; Heap, Marion

2015-11-20

Cell phone-based health information (mobile health or mHealth) campaigns are an emerging technology. This evaluation focused on the aspect of cost of two health information campaigns, one on hypertension and one on pregnancy. Researchers could either contract out the technical components of the campaigns or attempt to run the campaigns themselves, in-house. The in-house campaigns cost an estimated ZAR13 548.72 v. the private provider quotes which ranged from ZAR27 542.97 to ZAR34 227.59. Running the campaigns in-house was more labour intensive and required more technical expertise, but had a reduced delivery failure rate (9.2% in-house v. 30.0% private provider). Running small to medium SMS (text message) campaigns for evaluative purposes proved advantageous over contracting out to private providers. Larger-scale evaluations and full-scale roll-out will require the services of private providers, but it is still essential that researchers actively engage with and monitor the technical aspects of these campaigns.

Review of dynamic contrast-enhanced MRI: Technical aspects and applications in the musculoskeletal system.

PubMed

Sujlana, Parvinder; Skrok, Jan; Fayad, Laura M

2018-04-01

Although postcontrast imaging has been used for many years in musculoskeletal imaging, dynamic contrast enhanced (DCE) MRI is not routinely used in many centers around the world. Unlike conventional contrast-enhanced sequences, DCE-MRI allows the evaluation of the temporal pattern of enhancement in the musculoskeletal system, perhaps best known for its use in oncologic applications (such as differentiating benign from malignant tumors, evaluating for treatment response after neoadjuvant chemotherapy, and differentiating postsurgical changes from residual tumor). However, DCE-MRI can also be used to evaluate inflammatory processes such as Charcot foot and synovitis, and evaluate bone perfusion in entities like Legg Calve Perthes disease and arthritis. Finally, vascular abnormalities and associated complications may be better characterized with DCE-MRI than conventional imaging. The goal of this article is to review the applications and technical aspects of DCE-MRI in the musculoskeletal system. 5 Technical Efficacy: Stage 3 J. Magn. Reson. Imaging 2018;47:875-890. © 2017 International Society for Magnetic Resonance in Medicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steffens, H.D.; Kern, H.; Janczak, J.

The potential benefits and the current state-of-the-art in MMCs will be presented through a discussion of their processing and related aspects. The advantages and limitations of most common manufacturing techniques of fiber reinforced metals, e.g. realized property potential and commercial possibilities, will be outlined. The emphasis will be given on novel powder metallurgy techniques such as rapid solidification (e.g. atomization techniques and plasma processes) and new materials systems (e.g. intermetallic matrix composites). The technical barriers which prevent the transition of MMCs from aerospace to a wider range of applications will be highlighted, Special attention will be drawn to the relationmore » between processing parameters, fiber-matrix interface and composite properties. The challenge of composite modeling and design as well as interface controlling for successful processing utilization of MMCs will be mentioned. The benefits of use of computer techniques (databases, simulations, knowledge based systems) to aid the composite design and process control (fuzzy logic) will be shown on several examples. The technical possibilities of adaptation of interface tailoring approaches from the PMC area such as graded interphase or rubber-bumper interface will be studied. In addition, on the basis of recent forecasts by different experts on composite materials the question of the MMCs future will be discussed. Have they a chance in the next few years to meet the requirements of successful commercial applications, especially those of clients? The problems which have to be solved and options for solution will be dealt with.« less