Implementation of Medical Information Exchange System Based on EHR Standard.

PubMed

Han, Soon Hwa; Lee, Min Ho; Kim, Sang Guk; Jeong, Jun Yong; Lee, Bi Na; Choi, Myeong Seon; Kim, Il Kon; Park, Woo Sung; Ha, Kyooseob; Cho, Eunyoung; Kim, Yoon; Bae, Jae Bong

2010-12-01

To develop effective ways of sharing patients' medical information, we developed a new medical information exchange system (MIES) based on a registry server, which enabled us to exchange different types of data generated by various systems. To assure that patient's medical information can be effectively exchanged under different system environments, we adopted the standardized data transfer methods and terminologies suggested by the Center for Interoperable Electronic Healthcare Record (CIEHR) of Korea in order to guarantee interoperability. Regarding information security, MIES followed the security guidelines suggested by the CIEHR of Korea. This study aimed to develop essential security systems for the implementation of online services, such as encryption of communication, server security, database security, protection against hacking, contents, and network security. The registry server managed information exchange as well as the registration information of the clinical document architecture (CDA) documents, and the CDA Transfer Server was used to locate and transmit the proper CDA document from the relevant repository. The CDA viewer showed the CDA documents via connection with the information systems of related hospitals. This research chooses transfer items and defines document standards that follow CDA standards, such that exchange of CDA documents between different systems became possible through ebXML. The proposed MIES was designed as an independent central registry server model in order to guarantee the essential security of patients' medical information.

Positive train control interoperability and networking research : final report.

DOT National Transportation Integrated Search

2015-12-01

This document describes the initial development of an ITC PTC Shared Network (IPSN), a hosted : environment to support the distribution, configuration management, and IT governance of Interoperable : Train Control (ITC) Positive Train Control (PTC) s...

Towards a cross-domain interoperable framework for natural hazards and disaster risk reduction information

NASA Astrophysics Data System (ADS)

Tomas, Robert; Harrison, Matthew; Barredo, José I.; Thomas, Florian; Llorente Isidro, Miguel; Cerba, Otakar; Pfeiffer, Manuela

2014-05-01

The vast amount of information and data necessary for comprehensive hazard and risk assessment presents many challenges regarding the lack of accessibility, comparability, quality, organisation and dissemination of natural hazards spatial data. In order to mitigate these limitations an interoperable framework has been developed in the framework of the development of legally binding Implementing rules of the EU INSPIRE Directive1* aiming at the establishment of the European Spatial Data Infrastructure. The interoperability framework is described in the Data Specification on Natural risk zones - Technical Guidelines (DS) document2* that was finalized and published on 10.12. 2013. This framework provides means for facilitating access, integration, harmonisation and dissemination of natural hazard data from different domains and sources. The objective of this paper is twofold. Firstly, the paper demonstrates the applicability of the interoperable framework developed in the DS and highlights the key aspects of the interoperability to the various natural hazards communities. Secondly, the paper "translates" into common language the main features and potentiality of the interoperable framework of the DS for a wider audience of scientists and practitioners in the natural hazards domain. Further in this paper the main five aspects of the interoperable framework will be presented. First, the issue of a common terminology for the natural hazards domain will be addressed. A common data model to facilitate cross domain data integration will follow secondly. Thirdly, the common methodology developed to provide qualitative or quantitative assessments of natural hazards will be presented. Fourthly, the extensible classification schema for natural hazards developed from a literature review and key reference documents from the contributing community of practice will be shown. Finally, the applicability of the interoperable framework for the various stakeholder groups will be also presented. This paper closes discussing open issues and next steps regarding the sustainability and evolution of the interoperable framework and missing aspects such as multi-hazard and multi-risk. --------------- 1*INSPIRE - Infrastructure for spatial information in Europe, http://inspire.ec.europa.eu 2*http://inspire.jrc.ec.europa.eu/documents/Data_Specifications/INSPIRE_DataSpecification_NZ_v3.0.pdf

Security and Privacy in a DACS.

PubMed

Delgado, Jaime; Llorente, Silvia; Pàmies, Martí; Vilalta, Josep

2016-01-01

The management of electronic health records (EHR), in general, and clinical documents, in particular, is becoming a key issue in the daily work of Healthcare Organizations (HO). The need for providing secure and private access to, and storage for, clinical documents together with the need for HO to interoperate, raises a number of issues difficult to solve. Many systems are in place to manage EHR and documents. Some of these Healthcare Information Systems (HIS) follow standards in their document structure and communications protocols, but many do not. In fact, they are mostly proprietary and do not interoperate. Our proposal to solve the current situation is the use of a DACS (Document Archiving and Communication System) for providing security, privacy and standardized access to clinical documents.

An HL7-CDA wrapper for facilitating semantic interoperability to rule-based Clinical Decision Support Systems.

PubMed

Sáez, Carlos; Bresó, Adrián; Vicente, Javier; Robles, Montserrat; García-Gómez, Juan Miguel

2013-03-01

The success of Clinical Decision Support Systems (CDSS) greatly depends on its capability of being integrated in Health Information Systems (HIS). Several proposals have been published up to date to permit CDSS gathering patient data from HIS. Some base the CDSS data input on the HL7 reference model, however, they are tailored to specific CDSS or clinical guidelines technologies, or do not focus on standardizing the CDSS resultant knowledge. We propose a solution for facilitating semantic interoperability to rule-based CDSS focusing on standardized input and output documents conforming an HL7-CDA wrapper. We define the HL7-CDA restrictions in a HL7-CDA implementation guide. Patient data and rule inference results are mapped respectively to and from the CDSS by means of a binding method based on an XML binding file. As an independent clinical document, the results of a CDSS can present clinical and legal validity. The proposed solution is being applied in a CDSS for providing patient-specific recommendations for the care management of outpatients with diabetes mellitus. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Design and Implementation of a REST API for the Human Well Being Index (HWBI)

EPA Science Inventory

Interoperable software development uses principles of component reuse, systems integration, flexible data transfer, and standardized ontological documentation to promote access, reuse, and integration of code. While interoperability principles are increasingly considered technolo...

Design and Implementation of a REST API for the ?Human Well Being Index (HWBI)

EPA Science Inventory

Interoperable software development uses principles of component reuse, systems integration, flexible data transfer, and standardized ontological documentation to promote access, reuse, and integration of code. While interoperability principles are increasingly considered technolo...

Component Technology for High-Performance Scientific Simulation Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epperly, T; Kohn, S; Kumfert, G

2000-11-09

We are developing scientific software component technology to manage the complexity of modem, parallel simulation software and increase the interoperability and re-use of scientific software packages. In this paper, we describe a language interoperability tool named Babel that enables the creation and distribution of language-independent software libraries using interface definition language (IDL) techniques. We have created a scientific IDL that focuses on the unique interface description needs of scientific codes, such as complex numbers, dense multidimensional arrays, complicated data types, and parallelism. Preliminary results indicate that in addition to language interoperability, this approach provides useful tools for thinking about themore » design of modem object-oriented scientific software libraries. Finally, we also describe a web-based component repository called Alexandria that facilitates the distribution, documentation, and re-use of scientific components and libraries.« less

An adaptive semantic based mediation system for data interoperability among Health Information Systems.

PubMed

Khan, Wajahat Ali; Khattak, Asad Masood; Hussain, Maqbool; Amin, Muhammad Bilal; Afzal, Muhammad; Nugent, Christopher; Lee, Sungyoung

2014-08-01

Heterogeneity in the management of the complex medical data, obstructs the attainment of data level interoperability among Health Information Systems (HIS). This diversity is dependent on the compliance of HISs with different healthcare standards. Its solution demands a mediation system for the accurate interpretation of data in different heterogeneous formats for achieving data interoperability. We propose an adaptive AdapteR Interoperability ENgine mediation system called ARIEN, that arbitrates between HISs compliant to different healthcare standards for accurate and seamless information exchange to achieve data interoperability. ARIEN stores the semantic mapping information between different standards in the Mediation Bridge Ontology (MBO) using ontology matching techniques. These mappings are provided by our System for Parallel Heterogeneity (SPHeRe) matching system and Personalized-Detailed Clinical Model (P-DCM) approach to guarantee accuracy of mappings. The realization of the effectiveness of the mappings stored in the MBO is evaluation of the accuracy in transformation process among different standard formats. We evaluated our proposed system with the transformation process of medical records between Clinical Document Architecture (CDA) and Virtual Medical Record (vMR) standards. The transformation process achieved over 90 % of accuracy level in conversion process between CDA and vMR standards using pattern oriented approach from the MBO. The proposed mediation system improves the overall communication process between HISs. It provides an accurate and seamless medical information exchange to ensure data interoperability and timely healthcare services to patients.

Interoperability of Electronic Health Records: A Physician-Driven Redesign.

PubMed

Miller, Holly; Johns, Lucy

2018-01-01

PURPOSE: Electronic health records (EHRs), now used by hundreds of thousands of providers and encouraged by federal policy, have the potential to improve quality and decrease costs in health care. But interoperability, although technically feasible among different EHR systems, is the weak link in the chain of logic. Interoperability is inhibited by poor understanding, by suboptimal implementation, and at times by a disinclination to dilute market share or patient base on the part of vendors or providers, respectively. The intent of this project has been to develop a series of practicable recommendations that, if followed by EHR vendors and users, can promote and enhance interoperability, helping EHRs reach their potential. METHODOLOGY: A group of 11 physicians, one nurse, and one health policy consultant, practicing from California to Massachusetts, has developed a document titled "Feature and Function Recommendations To Optimize Clinician Usability of Direct Interoperability To Enhance Patient Care" that offers recommendations from the clinician point of view. This report introduces some of these recommendations and suggests their implications for policy and the "virtualization" of EHRs. CONCLUSION: Widespread adoption of even a few of these recommendations by designers and vendors would enable a major advance toward the "Triple Aim" of improving the patient experience, improving the health of populations, and reducing per capita costs.

Environmental Models as a Service: Enabling Interoperability ...

EPA Pesticide Factsheets

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantage of streamlined deployment processes and affordable cloud access to move algorithms and data to the web for discoverability and consumption. In these deployments, environmental models can become available to end users through RESTful web services and consistent application program interfaces (APIs) that consume, manipulate, and store modeling data. RESTful modeling APIs also promote discoverability and guide usability through self-documentation. Embracing the RESTful paradigm allows models to be accessible via a web standard, and the resulting endpoints are platform- and implementation-agnostic while simultaneously presenting significant computational capabilities for spatial and temporal scaling. RESTful APIs present data in a simple verb-noun web request interface: the verb dictates how a resource is consumed using HTTP methods (e.g., GET, POST, and PUT) and the noun represents the URL reference of the resource on which the verb will act. The RESTful API can self-document in both the HTTP response and an interactive web page using the Open API standard. This lets models function as an interoperable service that promotes sharing, documentation, and discoverability. Here, we discuss the

DOE Office of Scientific and Technical Information (OSTI.GOV)

Widergren, Steven E.; Knight, Mark R.; Melton, Ronald B.

The Interoperability Strategic Vision whitepaper aims to promote a common understanding of the meaning and characteristics of interoperability and to provide a strategy to advance the state of interoperability as applied to integration challenges facing grid modernization. This includes addressing the quality of integrating devices and systems and the discipline to improve the process of successfully integrating these components as business models and information technology improve over time. The strategic vision for interoperability described in this document applies throughout the electric energy generation, delivery, and end-use supply chain. Its scope includes interactive technologies and business processes from bulk energy levelsmore » to lower voltage level equipment and the millions of appliances that are becoming equipped with processing power and communication interfaces. A transformational aspect of a vision for interoperability in the future electric system is the coordinated operation of intelligent devices and systems at the edges of grid infrastructure. This challenge offers an example for addressing interoperability concerns throughout the electric system.« less

Comparison of a semi-automatic annotation tool and a natural language processing application for the generation of clinical statement entries.

PubMed

Lin, Ching-Heng; Wu, Nai-Yuan; Lai, Wei-Shao; Liou, Der-Ming

2015-01-01

Electronic medical records with encoded entries should enhance the semantic interoperability of document exchange. However, it remains a challenge to encode the narrative concept and to transform the coded concepts into a standard entry-level document. This study aimed to use a novel approach for the generation of entry-level interoperable clinical documents. Using HL7 clinical document architecture (CDA) as the example, we developed three pipelines to generate entry-level CDA documents. The first approach was a semi-automatic annotation pipeline (SAAP), the second was a natural language processing (NLP) pipeline, and the third merged the above two pipelines. We randomly selected 50 test documents from the i2b2 corpora to evaluate the performance of the three pipelines. The 50 randomly selected test documents contained 9365 words, including 588 Observation terms and 123 Procedure terms. For the Observation terms, the merged pipeline had a significantly higher F-measure than the NLP pipeline (0.89 vs 0.80, p<0.0001), but a similar F-measure to that of the SAAP (0.89 vs 0.87). For the Procedure terms, the F-measure was not significantly different among the three pipelines. The combination of a semi-automatic annotation approach and the NLP application seems to be a solution for generating entry-level interoperable clinical documents. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.comFor numbered affiliation see end of article.

Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

PubMed

Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

2013-01-01

The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

A Space Acquisition Leading Indicator Based on System Interoperation Maturity

DTIC Science & Technology

2010-12-01

delivered hardware, improper use of soldering materials, improper installation of thermal blankets , and missing test procedure documentation A poor...office, the first GEO integrated payload and spacecraft successfully completed thermal vacuum (TVAC) testing in November 2009. Program officials...contamination in delivered hardware, improper use of soldering materials, improper installation of thermal blankets , and missing test procedure

IHE cross-enterprise document sharing for imaging: interoperability testing software

PubMed Central

2010-01-01

Background With the deployments of Electronic Health Records (EHR), interoperability testing in healthcare is becoming crucial. EHR enables access to prior diagnostic information in order to assist in health decisions. It is a virtual system that results from the cooperation of several heterogeneous distributed systems. Interoperability between peers is therefore essential. Achieving interoperability requires various types of testing. Implementations need to be tested using software that simulates communication partners, and that provides test data and test plans. Results In this paper we describe a software that is used to test systems that are involved in sharing medical images within the EHR. Our software is used as part of the Integrating the Healthcare Enterprise (IHE) testing process to test the Cross Enterprise Document Sharing for imaging (XDS-I) integration profile. We describe its architecture and functionalities; we also expose the challenges encountered and discuss the elected design solutions. Conclusions EHR is being deployed in several countries. The EHR infrastructure will be continuously evolving to embrace advances in the information technology domain. Our software is built on a web framework to allow for an easy evolution with web technology. The testing software is publicly available; it can be used by system implementers to test their implementations. It can also be used by site integrators to verify and test the interoperability of systems, or by developers to understand specifications ambiguities, or to resolve implementations difficulties. PMID:20858241

IHE cross-enterprise document sharing for imaging: interoperability testing software.

PubMed

Noumeir, Rita; Renaud, Bérubé

2010-09-21

With the deployments of Electronic Health Records (EHR), interoperability testing in healthcare is becoming crucial. EHR enables access to prior diagnostic information in order to assist in health decisions. It is a virtual system that results from the cooperation of several heterogeneous distributed systems. Interoperability between peers is therefore essential. Achieving interoperability requires various types of testing. Implementations need to be tested using software that simulates communication partners, and that provides test data and test plans. In this paper we describe a software that is used to test systems that are involved in sharing medical images within the EHR. Our software is used as part of the Integrating the Healthcare Enterprise (IHE) testing process to test the Cross Enterprise Document Sharing for imaging (XDS-I) integration profile. We describe its architecture and functionalities; we also expose the challenges encountered and discuss the elected design solutions. EHR is being deployed in several countries. The EHR infrastructure will be continuously evolving to embrace advances in the information technology domain. Our software is built on a web framework to allow for an easy evolution with web technology. The testing software is publicly available; it can be used by system implementers to test their implementations. It can also be used by site integrators to verify and test the interoperability of systems, or by developers to understand specifications ambiguities, or to resolve implementations difficulties.

Capturing Essential Information to Achieve Safe Interoperability

PubMed Central

Weininger, Sandy; Jaffe, Michael B.; Rausch, Tracy; Goldman, Julian M.

2016-01-01

In this article we describe the role of “clinical scenario” information to assure the safety of interoperable systems, as well as the system’s ability to deliver the requisite clinical functionality to improve clinical care. Described are methods and rationale for capturing the clinical needs, workflow, hazards, and device interactions in the clinical environment. Key user (clinician and clinical engineer) needs and system requirements can be derived from this information, therefore improving the communication from clinicians to medical device and information technology system developers. This methodology is intended to assist the health care community, including researchers, standards developers, regulators, and manufacturers, by providing clinical definition to support requirements in the systems engineering process, particularly those focusing on development of Integrated Clinical Environments described in standard ASTM F2761. Our focus is on identifying and documenting relevant interactions and medical device capabilities within the system using a documentation tool called medical device interface data sheets (MDIDSa) and mitigating hazardous situations related to workflow, product usability, data integration, and the lack of effective medical device-health information technology system integration to achieve safe interoperability. Portions of the analysis of a clinical scenario for a “Patient-controlled analgesia safety interlock” are provided to illustrate the method. Collecting better clinical adverse event information and proposed solutions can help identify opportunities to improve current device capabilities and interoperability and support a Learning Health System to improve health care delivery. Developing and analyzing clinical scenarios are the first steps in creating solutions to address vexing patient safety problems and enable clinical innovation. A web-based research tool for implementing a means of acquiring and managing this information, the Clinical Scenario Repository™, is described. PMID:27387840

Capturing Essential Information to Achieve Safe Interoperability.

PubMed

Weininger, Sandy; Jaffe, Michael B; Rausch, Tracy; Goldman, Julian M

2017-01-01

In this article, we describe the role of "clinical scenario" information to assure the safety of interoperable systems, as well as the system's ability to deliver the requisite clinical functionality to improve clinical care. Described are methods and rationale for capturing the clinical needs, workflow, hazards, and device interactions in the clinical environment. Key user (clinician and clinical engineer) needs and system requirements can be derived from this information, therefore, improving the communication from clinicians to medical device and information technology system developers. This methodology is intended to assist the health care community, including researchers, standards developers, regulators, and manufacturers, by providing clinical definition to support requirements in the systems engineering process, particularly those focusing on development of Integrated Clinical Environments described in standard ASTM F2761. Our focus is on identifying and documenting relevant interactions and medical device capabilities within the system using a documentation tool called medical device interface data sheets and mitigating hazardous situations related to workflow, product usability, data integration, and the lack of effective medical device-health information technology system integration to achieve safe interoperability. Portions of the analysis of a clinical scenario for a "patient-controlled analgesia safety interlock" are provided to illustrate the method. Collecting better clinical adverse event information and proposed solutions can help identify opportunities to improve current device capabilities and interoperability and support a learning health system to improve health care delivery. Developing and analyzing clinical scenarios are the first steps in creating solutions to address vexing patient safety problems and enable clinical innovation. A Web-based research tool for implementing a means of acquiring and managing this information, the Clinical Scenario Repository™ (MD PnP Program), is described.

Bridging the Gap between HL7 CDA and HL7 FHIR: A JSON Based Mapping.

PubMed

Rinner, Christoph; Duftschmid, Georg

2016-01-01

The Austrian electronic health record (EHR) system ELGA went live in December 2016. It is a document oriented EHR system and is based on the HL7 Clinical Document Architecture (CDA). The HL7 Fast Healthcare Interoperability Resources (FHIR) is a relatively new standard that combines the advantages of HL7 messages and CDA Documents. In order to offer easier access to information stored in ELGA we present a method based on adapted FHIR resources to map CDA documents to FHIR resources. A proof-of-concept tool using Java, the open-source FHIR framework HAPI-FHIR and publicly available FHIR servers was created to evaluate the presented mapping. In contrast to other approaches the close resemblance of the mapping file to the FHIR specification allows existing FHIR infrastructure to be reused. In order to reduce information overload and facilitate the access to CDA documents, FHIR could offer a standardized way to query CDA data on a fine granular base in Austria.

The Development of Clinical Document Standards for Semantic Interoperability in China

PubMed Central

Yang, Peng; Pan, Feng; Wan, Yi; Tu, Haibo; Tang, Xuejun; Hu, Jianping

2011-01-01

Objectives This study is aimed at developing a set of data groups (DGs) to be employed as reusable building blocks for the construction of the eight most common clinical documents used in China's general hospitals in order to achieve their structural and semantic standardization. Methods The Diagnostics knowledge framework, the related approaches taken from the Health Level Seven (HL7), the Integrating the Healthcare Enterprise (IHE), and the Healthcare Information Technology Standards Panel (HITSP) and 1,487 original clinical records were considered together to form the DG architecture and data sets. The internal structure, content, and semantics of each DG were then defined by mapping each DG data set to a corresponding Clinical Document Architecture data element and matching each DG data set to the metadata in the Chinese National Health Data Dictionary. By using the DGs as reusable building blocks, standardized structures and semantics regarding the clinical documents for semantic interoperability were able to be constructed. Results Altogether, 5 header DGs, 48 section DGs, and 17 entry DGs were developed. Several issues regarding the DGs, including their internal structure, identifiers, data set names, definitions, length and format, data types, and value sets, were further defined. Standardized structures and semantics regarding the eight clinical documents were structured by the DGs. Conclusions This approach of constructing clinical document standards using DGs is a feasible standard-driven solution useful in preparing documents possessing semantic interoperability among the disparate information systems in China. These standards need to be validated and refined through further study. PMID:22259722

77 FR 19575 - Promoting Interoperability in the 700 MHz Commercial Spectrum; Interoperability of Mobile User...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... this document. FOR FURTHER INFORMATION CONTACT: Brenda Boykin, Wireless Telecommunications Bureau, (202... power levels of up to 1000 kW.\\2\\ The Lower A Block is also adjacent to the unpaired Lower 700 MHz E Block, where licensees (along with Lower 700 MHz D Block licensees) may operate at power levels up to 50...

Object-Oriented Approach for 3d Archaeological Documentation

NASA Astrophysics Data System (ADS)

Valente, R.; Brumana, R.; Oreni, D.; Banfi, F.; Barazzetti, L.; Previtali, M.

2017-08-01

Documentation on archaeological fieldworks needs to be accurate and time-effective. Many features unveiled during excavations can be recorded just once, since the archaeological workflow physically removes most of the stratigraphic elements. Some of them have peculiar characteristics which make them hardly recognizable as objects and prevent a full 3D documentation. The paper presents a suitable feature-based method to carry on archaeological documentation with a three-dimensional approach, tested on the archaeological site of S. Calocero in Albenga (Italy). The method is based on one hand on the use of structure from motion techniques for on-site recording and 3D Modelling to represent the three-dimensional complexity of stratigraphy. The entire documentation workflow is carried out through digital tools, assuring better accuracy and interoperability. Outputs can be used in GIS to perform spatial analysis; moreover, a more effective dissemination of fieldworks results can be assured with the spreading of datasets and other information through web-services.

A browser-based tool for conversion between Fortran NAMELIST and XML/HTML

NASA Astrophysics Data System (ADS)

Naito, O.

A browser-based tool for conversion between Fortran NAMELIST and XML/HTML is presented. It runs on an HTML5 compliant browser and generates reusable XML files to aid interoperability. It also provides a graphical interface for editing and annotating variables in NAMELIST, hence serves as a primitive code documentation environment. Although the tool is not comprehensive, it could be viewed as a test bed for integrating legacy codes into modern systems.

Implementing standards for the interoperability among healthcare providers in the public regionalized Healthcare Information System of the Lombardy Region.

PubMed

Barbarito, Fulvio; Pinciroli, Francesco; Mason, John; Marceglia, Sara; Mazzola, Luca; Bonacina, Stefano

2012-08-01

Information technologies (ITs) have now entered the everyday workflow in a variety of healthcare providers with a certain degree of independence. This independence may be the cause of difficulty in interoperability between information systems and it can be overcome through the implementation and adoption of standards. Here we present the case of the Lombardy Region, in Italy, that has been able, in the last 10 years, to set up the Regional Social and Healthcare Information System, connecting all the healthcare providers within the region, and providing full access to clinical and health-related documents independently from the healthcare organization that generated the document itself. This goal, in a region with almost 10 millions citizens, was achieved through a twofold approach: first, the political and operative push towards the adoption of the Health Level 7 (HL7) standard within single hospitals and, second, providing a technological infrastructure for data sharing based on interoperability specifications recognized at the regional level for messages transmitted from healthcare providers to the central domain. The adoption of such regional interoperability specifications enabled the communication among heterogeneous systems placed in different hospitals in Lombardy. Integrating the Healthcare Enterprise (IHE) integration profiles which refer to HL7 standards are adopted within hospitals for message exchange and for the definition of integration scenarios. The IHE patient administration management (PAM) profile with its different workflows is adopted for patient management, whereas the Scheduled Workflow (SWF), the Laboratory Testing Workflow (LTW), and the Ambulatory Testing Workflow (ATW) are adopted for order management. At present, the system manages 4,700,000 pharmacological e-prescriptions, and 1,700,000 e-prescriptions for laboratory exams per month. It produces, monthly, 490,000 laboratory medical reports, 180,000 radiology medical reports, 180,000 first aid medical reports, and 58,000 discharge summaries. Hence, despite there being still work in progress, the Lombardy Region healthcare system is a fully interoperable social healthcare system connecting patients, healthcare providers, healthcare organizations, and healthcare professionals in a large and heterogeneous territory through the implementation of international health standards. Copyright © 2012 Elsevier Inc. All rights reserved.

Seven recommendations to make your invasive alien species data more useful

USGS Publications Warehouse

Groom, Quentin J.; Adriaens, Tim; Desmet, Peter; Simpson, Annie; De Wever, Aaike; Bazos, Ioannis; Cardoso, Ana Cristina; Charles, Lucinda; Christopoulou, Anastasia; Gazda, Anna; Helmisaari, Harry; Hobern, Donald; Josefsson, Melanie; Lucy, Frances; Marisavljevic, Dragana; Oszako, Tomasz; Pergl, Jan; Petrovic-Obradovic, Olivera; Prévot, Céline; Ravn, Hans Peter; Richards, Gareth; Roques, Alain; Roy, Helen; Rozenberg, Marie-Anne A.; Scalera, Riccardo; Tricarico, Elena; Trichkova, Teodora; Vercayie, Diemer; Zenetos, Argyro; Vanderhoeven, Sonia

2017-01-01

Science-based strategies to tackle biological invasions depend on recent, accurate, well-documented, standardized and openly accessible information on alien species. Currently and historically, biodiversity data are scattered in numerous disconnected data silos that lack interoperability. The situation is no different for alien species data, and this obstructs efficient retrieval, combination, and use of these kinds of information for research and policy-making. Standardization and interoperability are particularly important as many alien species related research and policy activities require pooling data. We describe seven ways that data on alien species can be made more accessible and useful, based on the results of a European Cooperation in Science and Technology (COST) workshop: (1) Create data management plans; (2) Increase interoperability of information sources; (3) Document data through metadata; (4) Format data using existing standards; (5) Adopt controlled vocabularies; (6) Increase data availability; and (7) Ensure long-term data preservation. We identify four properties specific and integral to alien species data (species status, introduction pathway, degree of establishment, and impact mechanism) that are either missing from existing data standards or lack a recommended controlled vocabulary. Improved access to accurate, real-time and historical data will repay the long-term investment in data management infrastructure, by providing more accurate, timely and realistic assessments and analyses. If we improve core biodiversity data standards by developing their relevance to alien species, it will allow the automation of common activities regarding data processing in support of environmental policy. Furthermore, we call for considerable effort to maintain, update, standardize, archive, and aggregate datasets, to ensure proper valorization of alien species data and information before they become obsolete or lost.

Development of an electronic claim system based on an integrated electronic health record platform to guarantee interoperability.

PubMed

Kim, Hwa Sun; Cho, Hune; Lee, In Keun

2011-06-01

We design and develop an electronic claim system based on an integrated electronic health record (EHR) platform. This system is designed to be used for ambulatory care by office-based physicians in the United States. This is achieved by integrating various medical standard technologies for interoperability between heterogeneous information systems. The developed system serves as a simple clinical data repository, it automatically fills out the Centers for Medicare and Medicaid Services (CMS)-1500 form based on information regarding the patients and physicians' clinical activities. It supports electronic insurance claims by creating reimbursement charges. It also contains an HL7 interface engine to exchange clinical messages between heterogeneous devices. The system partially prevents physician malpractice by suggesting proper treatments according to patient diagnoses and supports physicians by easily preparing documents for reimbursement and submitting claim documents to insurance organizations electronically, without additional effort by the user. To show the usability of the developed system, we performed an experiment that compares the time spent filling out the CMS-1500 form directly and time required create electronic claim data using the developed system. From the experimental results, we conclude that the system could save considerable time for physicians in making claim documents. The developed system might be particularly useful for those who need a reimbursement-specialized EHR system, even though the proposed system does not completely satisfy all criteria requested by the CMS and Office of the National Coordinator for Health Information Technology (ONC). This is because the criteria are not sufficient but necessary condition for the implementation of EHR systems. The system will be upgraded continuously to implement the criteria and to offer more stable and transparent transmission of electronic claim data.

Future Interoperability of Camp Protection Systems (FICAPS)

NASA Astrophysics Data System (ADS)

Caron, Sylvie; Gündisch, Rainer; Marchand, Alain; Stahl, Karl-Hermann

2013-05-01

The FICAPS Project has been established as a Project of the European Defence Agency based on an initiative of Germany and France. Goal of this Project was to derive Guidelines, which by a proper implementation in future developments improve Camp Protection Systems (CPS) by enabling and improving interoperability between Camp Protection Systems and its Equipments of different Nations involved in multinational missions. These Guidelines shall allow for: • Real-time information exchange between equipments and systems of different suppliers and nations (even via SatCom), • Quick and easy replacement of equipments (even of different Nations) at run-time in the field by means of plug and play capability, thus lowering the operational and logistic costs and making the system highly available, • Enhancement of system capabilities (open and modular systems) by adding new equipment with new capabilities (just plug-in, automatic adjustment of the HMI Human Machine Interface) without costly and time consuming validation and test on system level (validation and test can be done on Equipment level), Four scenarios have been identified to summarize the interoperability requirements from an operational viewpoint. To prove the definitions given in the Guideline Document, a French and a German Demonstration System, based on existing national assets, were realized. Demonstrations, showing the capabilities given by the defined interoperability requirements with respect to the operational scenarios, were performed. Demonstrations included remote control of a CPS by another CPS, remote sensor control (Electro-Optic/InfraRed EO/IR) and remote effector control. This capability can be applied to extend the protection area or to protect distant infrastructural assets Demonstrations have been performed. The required interoperability functionality was shown successfully. Even if the focus of the FICAPS project was on camp protection, the solution found is also appropriate for other force protection and ISR (Intelligence Surveillance Reconnaissance) tasks not only due to its flexibility but also due to the chosen interfacing.

Using Ontologies to Formalize Services Specifications in Multi-Agent Systems

NASA Technical Reports Server (NTRS)

Breitman, Karin Koogan; Filho, Aluizio Haendchen; Haeusler, Edward Hermann

2004-01-01

One key issue in multi-agent systems (MAS) is their ability to interact and exchange information autonomously across applications. To secure agent interoperability, designers must rely on a communication protocol that allows software agents to exchange meaningful information. In this paper we propose using ontologies as such communication protocol. Ontologies capture the semantics of the operations and services provided by agents, allowing interoperability and information exchange in a MAS. Ontologies are a formal, machine processable, representation that allows to capture the semantics of a domain and, to derive meaningful information by way of logical inference. In our proposal we use a formal knowledge representation language (OWL) that translates into Description Logics (a subset of first order logic), thus eliminating ambiguities and providing a solid base for machine based inference. The main contribution of this approach is to make the requirements explicit, centralize the specification in a single document (the ontology itself), at the same that it provides a formal, unambiguous representation that can be processed by automated inference machines.

Establishing Transportation Framework Services Using the Open Geospatial Consortium Web Feature Service Specification

NASA Astrophysics Data System (ADS)

Yang, C.; Wong, D. W.; Phillips, T.; Wright, R. A.; Lindsey, S.; Kafatos, M.

2005-12-01

As a teamed partnership of the Center for Earth Observing and Space Research (CEOSR) at George Mason University (GMU), Virginia Department of Transportation (VDOT), Bureau of Transportation Statistics at the Department of Transportation (BTS/DOT), and Intergraph, we established Transportation Framework Data Services using Open Geospatial Consortium (OGC)'s Web Feature Service (WFS) Specification to enable the sharing of transportation data among the federal level with data from BTS/DOT, the state level through VDOT, the industries through Intergraph. CEOSR develops WFS solutions using Intergraph software. Relevant technical documents are also developed and disseminated through the partners. The WFS is integrated with operational geospatial systems at CEOSR and VDOT. CEOSR works with Intergraph on developing WFS solutions and technical documents. GeoMedia WebMap WFS toolkit is used with software and technical support from Intergraph. ESRI ArcIMS WFS connector is used with GMU's campus license of ESRI products. Tested solutions are integrated with framework data service operational systems, including 1) CEOSR's interoperable geospatial information services, FGDC clearinghouse Node, Geospatial One Stop (GOS) portal, and WMS services, 2) VDOT's state transportation data and GIS infrastructure, and 3)BTS/DOT's national transportation data. The project presents: 1) develop and deploy an operational OGC WFS 1.1 interfaces at CEOSR for registering with FGDC/GOS Portal and responding to Web ``POST'' requests for transportation Framework data as listed in Table 1; 2) build the WFS service that can return the data that conform to the drafted ANSI/INCITS L1 Standard (when available) for each identified theme in the format given by OGC Geography Markup Language (GML) Version 3.0 or higher; 3) integrate the OGC WFS with CEOSR's clearinghouse nodes, 4) establish a formal partnership to develop and share WFS-based geospatial interoperability technology among GMU, VDOT, BTS/DOT, and Intergraph; and 5) develop WFS-based solutions and technical documents using the GeoMedia WebMap WFS toolkit. Geospatial Web Feature Service is demonstrated to be more efficient in sharing vector data and supports direct Internet access transportation data. Developed WFS solutions also enhanced the interoperable service provided by CEOSR through the FGDC clearinghouse node and the GOS Portal.

Web services-based text-mining demonstrates broad impacts for interoperability and process simplification.

PubMed

Wiegers, Thomas C; Davis, Allan Peter; Mattingly, Carolyn J

2014-01-01

The Critical Assessment of Information Extraction systems in Biology (BioCreAtIvE) challenge evaluation tasks collectively represent a community-wide effort to evaluate a variety of text-mining and information extraction systems applied to the biological domain. The BioCreative IV Workshop included five independent subject areas, including Track 3, which focused on named-entity recognition (NER) for the Comparative Toxicogenomics Database (CTD; http://ctdbase.org). Previously, CTD had organized document ranking and NER-related tasks for the BioCreative Workshop 2012; a key finding of that effort was that interoperability and integration complexity were major impediments to the direct application of the systems to CTD's text-mining pipeline. This underscored a prevailing problem with software integration efforts. Major interoperability-related issues included lack of process modularity, operating system incompatibility, tool configuration complexity and lack of standardization of high-level inter-process communications. One approach to potentially mitigate interoperability and general integration issues is the use of Web services to abstract implementation details; rather than integrating NER tools directly, HTTP-based calls from CTD's asynchronous, batch-oriented text-mining pipeline could be made to remote NER Web services for recognition of specific biological terms using BioC (an emerging family of XML formats) for inter-process communications. To test this concept, participating groups developed Representational State Transfer /BioC-compliant Web services tailored to CTD's NER requirements. Participants were provided with a comprehensive set of training materials. CTD evaluated results obtained from the remote Web service-based URLs against a test data set of 510 manually curated scientific articles. Twelve groups participated in the challenge. Recall, precision, balanced F-scores and response times were calculated. Top balanced F-scores for gene, chemical and disease NER were 61, 74 and 51%, respectively. Response times ranged from fractions-of-a-second to over a minute per article. We present a description of the challenge and summary of results, demonstrating how curation groups can effectively use interoperable NER technologies to simplify text-mining pipeline implementation. Database URL: http://ctdbase.org/ © The Author(s) 2014. Published by Oxford University Press.

Web services-based text-mining demonstrates broad impacts for interoperability and process simplification

PubMed Central

Wiegers, Thomas C.; Davis, Allan Peter; Mattingly, Carolyn J.

2014-01-01

The Critical Assessment of Information Extraction systems in Biology (BioCreAtIvE) challenge evaluation tasks collectively represent a community-wide effort to evaluate a variety of text-mining and information extraction systems applied to the biological domain. The BioCreative IV Workshop included five independent subject areas, including Track 3, which focused on named-entity recognition (NER) for the Comparative Toxicogenomics Database (CTD; http://ctdbase.org). Previously, CTD had organized document ranking and NER-related tasks for the BioCreative Workshop 2012; a key finding of that effort was that interoperability and integration complexity were major impediments to the direct application of the systems to CTD's text-mining pipeline. This underscored a prevailing problem with software integration efforts. Major interoperability-related issues included lack of process modularity, operating system incompatibility, tool configuration complexity and lack of standardization of high-level inter-process communications. One approach to potentially mitigate interoperability and general integration issues is the use of Web services to abstract implementation details; rather than integrating NER tools directly, HTTP-based calls from CTD's asynchronous, batch-oriented text-mining pipeline could be made to remote NER Web services for recognition of specific biological terms using BioC (an emerging family of XML formats) for inter-process communications. To test this concept, participating groups developed Representational State Transfer /BioC-compliant Web services tailored to CTD's NER requirements. Participants were provided with a comprehensive set of training materials. CTD evaluated results obtained from the remote Web service-based URLs against a test data set of 510 manually curated scientific articles. Twelve groups participated in the challenge. Recall, precision, balanced F-scores and response times were calculated. Top balanced F-scores for gene, chemical and disease NER were 61, 74 and 51%, respectively. Response times ranged from fractions-of-a-second to over a minute per article. We present a description of the challenge and summary of results, demonstrating how curation groups can effectively use interoperable NER technologies to simplify text-mining pipeline implementation. Database URL: http://ctdbase.org/ PMID:24919658

The Health Service Bus: an architecture and case study in achieving interoperability in healthcare.

PubMed

Ryan, Amanda; Eklund, Peter

2010-01-01

Interoperability in healthcare is a requirement for effective communication between entities, to ensure timely access to up to-date patient information and medical knowledge, and thus facilitate consistent patient care. An interoperability framework called the Health Service Bus (HSB), based on the Enterprise Service Bus (ESB) middleware software architecture is presented here as a solution to all three levels of interoperability as defined by the HL7 EHR Interoperability Work group in their definitive white paper "Coming to Terms". A prototype HSB system was implemented based on the Mule Open-Source ESB and is outlined and discussed, followed by a clinically-based example.

ooi: OpenStack OCCI interface

NASA Astrophysics Data System (ADS)

López García, Álvaro; Fernández del Castillo, Enol; Orviz Fernández, Pablo

In this document we present an implementation of the Open Grid Forum's Open Cloud Computing Interface (OCCI) for OpenStack, namely ooi (Openstack occi interface, 2015) [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.

An Architecture for the Integration of Clinical Data from a PEHR in a Regional Research Platform.

PubMed

Schreiweis, Björn; Bronsch, Tobias; Stein, Katharina E; Nöst, Stefan; Aguduri, Lakshmi S; Brandner, Antje; Pensold, Peter; Weiss, Nicolas; Yüksekogul, Nilay; Bergh, Björn; Heinze, Oliver

2016-01-01

Making clinical information available for research is not only relevant for healthcare institutions, but also for regional EHRs, as cross-sectorial information can be made accessible. In the INFOPAT (INFOrmation technology for PATient-oriented health care in the Rhine-Neckar metropolitan region) project we are thus implementing both, a regional personal cross-enterprise electronic health record (PEHR) and a regional research platform (RRP) based on information from the PEHR. IHE profiles are implemented to achieve interoperability between healthcare institutions electronic medical records (EMR) and PEHR on the one hand, as well as PEHR and RRP on the other hand. The use case for the RRP is cross-sectorial quality assessment and improvement for colorectal cancer based on a quality indicator (QI) approach including patients' perspectives. For semantic interoperability the responses are transferred in the form of HL7 CDA L2 documents. The resulting architecture for a RRP shows that implementing a PEHR in combination with a RRP based on international communication standards is possible. Also IHE XDS can be used for integration of patient care and biomedical research infrastructures.

Application of Coalition Battle Management Language (C-BML) and C-BML Services to Live, Virtual, and Constructive (LVC) Simulation Environments

DTIC Science & Technology

2011-12-01

Task Based Approach to Planning.” Paper 08F- SIW -033. In Proceed- ings of the Fall Simulation Interoperability Workshop. Simulation Interoperability...Paper 06F- SIW -003. In Proceed- 2597 Blais ings of the Fall Simulation Interoperability Workshop. Simulation Interoperability Standards Organi...MSDL).” Paper 10S- SIW -003. In Proceedings of the Spring Simulation Interoperability Workshop. Simulation Interoperability Standards Organization

Interoperable and accessible census and survey data from IPUMS.

PubMed

Kugler, Tracy A; Fitch, Catherine A

2018-02-27

The first version of the Integrated Public Use Microdata Series (IPUMS) was released to users in 1993, and since that time IPUMS has come to stand for interoperable and accessible census and survey data. Initially created to harmonize U.S. census microdata over time, IPUMS now includes microdata from the U.S. and international censuses and from surveys on health, employment, and other topics. IPUMS also provides geo-spatial data, aggregate population data, and environmental data. IPUMS supports ten data products, each disseminating an integrated data collection with a set of tools that make complex data easy to find, access, and use. Key features are record-level integration to create interoperable datasets, user-friendly interfaces, and comprehensive metadata and documentation. The IPUMS philosophy aligns closely with the FAIR principles of findability, accessibility, interoperability, and re-usability. IPUMS data have catalyzed knowledge generation across a wide range of social science and other disciplines, as evidenced by the large volume of publications and other products created by the vast IPUMS user community.

Improving the Interoperability of Disaster Models: a Case Study of Proposing Fireml for Forest Fire Model

NASA Astrophysics Data System (ADS)

Jiang, W.; Wang, F.; Meng, Q.; Li, Z.; Liu, B.; Zheng, X.

2018-04-01

This paper presents a new standardized data format named Fire Markup Language (FireML), extended by the Geography Markup Language (GML) of OGC, to elaborate upon the fire hazard model. The proposed FireML is able to standardize the input and output documents of a fire model for effectively communicating with different disaster management systems to ensure a good interoperability. To demonstrate the usage of FireML and testify its feasibility, an adopted forest fire spread model being compatible with FireML is described. And a 3DGIS disaster management system is developed to simulate the dynamic procedure of forest fire spread with the defined FireML documents. The proposed approach will enlighten ones who work on other disaster models' standardization work.

[The role of Integrating the Healthcare Enterprise (IHE) in telemedicine].

PubMed

Bergh, B; Brandner, A; Heiß, J; Kutscha, U; Merzweiler, A; Pahontu, R; Schreiweis, B; Yüksekogul, N; Bronsch, T; Heinze, O

2015-10-01

Telemedicine systems are today already used in a variety of areas to improve patient care. The lack of standardization in those solutions creates a lack of interoperability of the systems. Internationally accepted standards can help to solve the lack of system interoperability. With Integrating the Healthcare Enterprise (IHE), a worldwide initiative of users and vendors is working on the use of defined standards for specific use cases by describing those use cases in so called IHE Profiles. The aim of this work is to determine how telemedicine applications can be implemented using IHE profiles. Based on a literature review, exemplary telemedicine applications are described and technical abilities of IHE Profiles are evaluated. These IHE Profiles are examined for their usability and are then evaluated in exemplary telemedicine application architectures. There are IHE Profiles which can be identified as being useful for intersectoral patient records (e.g. PEHR at Heidelberg), as well as for point to point communication where no patient record is involved. In the area of patient records, the IHE Profile "Cross-Enterprise Document Sharing (XDS)" is often used. The point to point communication can be supported using the IHE "Cross-Enterprise Document Media Interchange (XDM)". IHE-based telemedicine applications offer caregivers the possibility to be informed about their patients using data from intersectoral patient records, but also there are possible savings by reusing the standardized interfaces in other scenarios.

Implementation of a next-generation electronic nursing records system based on detailed clinical models and integration of clinical practice guidelines.

PubMed

Min, Yul Ha; Park, Hyeoun-Ae; Chung, Eunja; Lee, Hyunsook

2013-12-01

The purpose of this paper is to describe the components of a next-generation electronic nursing records system ensuring full semantic interoperability and integrating evidence into the nursing records system. A next-generation electronic nursing records system based on detailed clinical models and clinical practice guidelines was developed at Seoul National University Bundang Hospital in 2013. This system has two components, a terminology server and a nursing documentation system. The terminology server manages nursing narratives generated from entity-attribute-value triplets of detailed clinical models using a natural language generation system. The nursing documentation system provides nurses with a set of nursing narratives arranged around the recommendations extracted from clinical practice guidelines. An electronic nursing records system based on detailed clinical models and clinical practice guidelines was successfully implemented in a hospital in Korea. The next-generation electronic nursing records system can support nursing practice and nursing documentation, which in turn will improve data quality.

XML and its impact on content and structure in electronic health care documents.

PubMed Central

Sokolowski, R.; Dudeck, J.

1999-01-01

Worldwide information networks have the requirement that electronic documents must be easily accessible, portable, flexible and system-independent. With the development of XML (eXtensible Markup Language), the future of electronic documents, health care informatics and the Web itself are about to change. The intent of the recently formed ASTM E31.25 subcommittee, "XML DTDs for Health Care", is to develop standard electronic document representations of paper-based health care documents and forms. A goal of the subcommittee is to work together to enhance existing levels of interoperability among the various XML/SGML standardization efforts, products and systems in health care. The ASTM E31.25 subcommittee uses common practices and software standards to develop the implementation recommendations for XML documents in health care. The implementation recommendations are being developed to standardize the many different structures of documents. These recommendations are in the form of a set of standard DTDs, or document type definitions that match the electronic document requirements in the health care industry. This paper discusses recent efforts of the ASTM E31.25 subcommittee. PMID:10566338

Real World Data and Service Integration: Demonstrations and Lessons Learnt from the GEOSS Architecture Implementation Pilot Phase Four

NASA Astrophysics Data System (ADS)

Simonis, I.; Alameh, N.; Percivall, G.

2012-04-01

The GEOSS Architecture Implementation Pilots (AIP) develop and pilot new process and infrastructure components for the GEOSS Common Infrastructure (GCI) and the broader GEOSS architecture through an evolutionary development process consisting of a set of phases. Each phase addresses a set of Societal Benefit Areas (SBA) and geoinformatic topics. The first three phases consisted of architecture refinements based on interactions with users; component interoperability testing; and SBA-driven demonstrations. The fourth phase (AIP-4) documented here focused on fostering interoperability arrangements and common practices for GEOSS by facilitating access to priority earth observation data sources and by developing and testing specific clients and mediation components to enable such access. Additionally, AIP-4 supported the development of a thesaurus for earth observation parameters and tutorials to guide data providers to make their data available through GEOSS. The results of AIP-4 are documented in two engineering reports and captured in a series of videos posted online. Led by the Open Geospatial Consortium (OGC), AIP-4 built on contributions from over 60 organizations. This wide portfolio helped testing interoperability arrangements in a highly heterogeneous environment. AIP-4 participants cooperated closely to test available data sets, access services, and client applications in multiple workflows and set ups. Eventually, AIP-4 improved the accessibility of GEOSS datasets identified as supporting Critical Earth Observation Priorities by the GEO User Interface Committee (UIC), and increased the use of the data through promoting availability of new data services, clients, and applications. During AIP-4, A number of key earth observation data sources have been made available online at standard service interfaces, discovered using brokered search approaches, and processed and visualized in generalized client applications. AIP-4 demonstrated the level of interoperability that can be achieved using currently available standards and corresponding products and implementations. The AIP-4 integration testing process proved that the integration of heterogeneous data resources available via interoperability arrangements such as WMS, WFS, WCS and WPS indeed works. However, the integration often required various levels of customizations on the client side to accommodate for variations in the service implementations. Those variations seem to be based on both malfunctioning service implementations as well as varying interpretations of or inconsistencies in existing standards. Other interoperability issues identified revolve around missing metadata or using unrecognized identifiers in the description of GEOSS resources. Once such issues are resolved, continuous compliance testing is necessary to ensure minimizing variability of implementations. Once data providers can choose from a set of enhanced implementations for offering their data using consistent interoperability arrangements, the barrier to client and decision support implementation developers will be lowered, leading to true leveraging of earth observation data through GEOSS. AIP-4 results, lessons learnt from previous AIPs 1-3 and close coordination with the Infrastructure Implementation Board (IIB), the successor of the Architecture and Data Committee (ADC), form the basis in the current preparation phase for the next Architecture Implementation Pilot, AIP-5. The Call For Participation will be launched in February and the pilot will be conducted from May to November 2012. The current planning foresees a scenario- oriented approach, with possible scenarios coming from the domains of disaster management, health (including air quality and waterborne diseases), water resource observations, energy, biodiversity and climate change, and agriculture.

Ensuring Sustainable Data Interoperability Across the Natural and Social Sciences

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2015-12-01

Both the natural and social science data communities are attempting to address the long-term sustainability of their data infrastructures in rapidly changing research, technological, and policy environments. Many parts of these communities are also considering how to improve the interoperability and integration of their data and systems across natural, social, health, and other domains. However, these efforts have generally been undertaken in parallel, with little thought about how different sustainability approaches may impact long-term interoperability from scientific, legal, or economic perspectives, or vice versa, i.e., how improved interoperability could enhance—or threaten—infrastructure sustainability. Scientific progress depends substantially on the ability to learn from the legacy of previous work available for current and future scientists to study, often by integrating disparate data not previously assembled. Digital data are less likely than scientific publications to be usable in the future unless they are managed by science-oriented repositories that can support long-term data access with the documentation and services needed for future interoperability. We summarize recent discussions in the social and natural science communities on emerging approaches to sustainability and relevant interoperability activities, including efforts by the Belmont Forum E-Infrastructures project to address global change data infrastructure needs; the Group on Earth Observations to further implement data sharing and improve data management across diverse societal benefit areas; and the Research Data Alliance to develop legal interoperability principles and guidelines and to address challenges faced by domain repositories. We also examine emerging needs for data interoperability in the context of the post-2015 development agenda and the expected set of Sustainable Development Goals (SDGs), which set ambitious targets for sustainable development, poverty reduction, and environmental stewardship by 2030. These efforts suggest the need for a holistic approach towards improving and implementing strategies, policies, and practices that will ensure long-term sustainability and interoperability of scientific data repositories and networks across multiple scientific domains.

Electronic Health Records Data and Metadata: Challenges for Big Data in the United States.

PubMed

Sweet, Lauren E; Moulaison, Heather Lea

2013-12-01

This article, written by researchers studying metadata and standards, represents a fresh perspective on the challenges of electronic health records (EHRs) and serves as a primer for big data researchers new to health-related issues. Primarily, we argue for the importance of the systematic adoption of standards in EHR data and metadata as a way of promoting big data research and benefiting patients. EHRs have the potential to include a vast amount of longitudinal health data, and metadata provides the formal structures to govern that data. In the United States, electronic medical records (EMRs) are part of the larger EHR. EHR data is submitted by a variety of clinical data providers and potentially by the patients themselves. Because data input practices are not necessarily standardized, and because of the multiplicity of current standards, basic interoperability in EHRs is hindered. Some of the issues with EHR interoperability stem from the complexities of the data they include, which can be both structured and unstructured. A number of controlled vocabularies are available to data providers. The continuity of care document standard will provide interoperability in the United States between the EMR and the larger EHR, potentially making data input by providers directly available to other providers. The data involved is nonetheless messy. In particular, the use of competing vocabularies such as the Systematized Nomenclature of Medicine-Clinical Terms, MEDCIN, and locally created vocabularies inhibits large-scale interoperability for structured portions of the records, and unstructured portions, although potentially not machine readable, remain essential. Once EMRs for patients are brought together as EHRs, the EHRs must be managed and stored. Adequate documentation should be created and maintained to assure the secure and accurate use of EHR data. There are currently a few notable international standards initiatives for EHRs. Organizations such as Health Level Seven International and Clinical Data Interchange Standards Consortium are developing and overseeing implementation of interoperability standards. Denmark and Singapore are two countries that have successfully implemented national EHR systems. Future work in electronic health information initiatives should underscore the importance of standards and reinforce interoperability of EHRs for big data research and for the sake of patients.

Embedding the shapes of regions of interest into a Clinical Document Architecture document.

PubMed

Minh, Nguyen Hai; Yi, Byoung-Kee; Kim, Il Kon; Song, Joon Hyun; Binh, Pham Viet

2015-03-01

Sharing a medical image visually annotated by a region of interest with a remotely located specialist for consultation is a good practice. It may, however, require a special-purpose (and most likely expensive) system to send and view them, which is an unfeasible solution in developing countries such as Vietnam. In this study, we design and implement interoperable methods based on the HL7 Clinical Document Architecture and the eXtensible Markup Language Stylesheet Language for Transformation standards to seamlessly exchange and visually present the shapes of regions of interest using web browsers. We also propose a new integration architecture for a Clinical Document Architecture generator that enables embedding of regions of interest and simultaneous auto-generation of corresponding style sheets. Using the Clinical Document Architecture document and style sheet, a sender can transmit clinical documents and medical images together with coordinate values of regions of interest to recipients. Recipients can easily view the documents and display embedded regions of interest by rendering them in their web browser of choice. © The Author(s) 2014.

Documenting Models for Interoperability and Reusability (proceedings)

EPA Science Inventory

Many modeling frameworks compartmentalize science via individual models that link sets of small components to create larger modeling workflows. Developing integrated watershed models increasingly requires coupling multidisciplinary, independent models, as well as collaboration be...

Documenting Models for Interoperability and Reusability

EPA Science Inventory

Many modeling frameworks compartmentalize science via individual models that link sets of small components to create larger modeling workflows. Developing integrated watershed models increasingly requires coupling multidisciplinary, independent models, as well as collaboration be...

Semantic Integration for Marine Science Interoperability Using Web Technologies

NASA Astrophysics Data System (ADS)

Rueda, C.; Bermudez, L.; Graybeal, J.; Isenor, A. W.

2008-12-01

The Marine Metadata Interoperability Project, MMI (http://marinemetadata.org) promotes the exchange, integration, and use of marine data through enhanced data publishing, discovery, documentation, and accessibility. A key effort is the definition of an Architectural Framework and Operational Concept for Semantic Interoperability (http://marinemetadata.org/sfc), which is complemented with the development of tools that realize critical use cases in semantic interoperability. In this presentation, we describe a set of such Semantic Web tools that allow performing important interoperability tasks, ranging from the creation of controlled vocabularies and the mapping of terms across multiple ontologies, to the online registration, storage, and search services needed to work with the ontologies (http://mmisw.org). This set of services uses Web standards and technologies, including Resource Description Framework (RDF), Web Ontology language (OWL), Web services, and toolkits for Rich Internet Application development. We will describe the following components: MMI Ontology Registry: The MMI Ontology Registry and Repository provides registry and storage services for ontologies. Entries in the registry are associated with projects defined by the registered users. Also, sophisticated search functions, for example according to metadata items and vocabulary terms, are provided. Client applications can submit search requests using the WC3 SPARQL Query Language for RDF. Voc2RDF: This component converts an ASCII comma-delimited set of terms and definitions into an RDF file. Voc2RDF facilitates the creation of controlled vocabularies by using a simple form-based user interface. Created vocabularies and their descriptive metadata can be submitted to the MMI Ontology Registry for versioning and community access. VINE: The Vocabulary Integration Environment component allows the user to map vocabulary terms across multiple ontologies. Various relationships can be established, for example exactMatch, narrowerThan, and subClassOf. VINE can compute inferred mappings based on the given associations. Attributes about each mapping, like comments and a confidence level, can also be included. VINE also supports registering and storing resulting mapping files in the Ontology Registry. The presentation will describe the application of semantic technologies in general, and our planned applications in particular, to solve data management problems in the marine and environmental sciences.

Implementation of a standards-based anaesthesia record compliant with the health level 7 (HL7) clinical document architecture (CDA).

PubMed

Hurrell, M J; Monk, T G; Nicol, A; Norton, A N; Reich, D L; Walsh, J L

2012-08-01

With the increasing use of anaesthesia information management systems (AIMS) there is the opportunity for different institutions to aggregate and share information both nationally and internationally. Potential uses of such aggregated data include outcomes research, benchmarking and improvement in clinical practice and patient safety. However, these goals can only be achieved if data contained in records from different sources are truly comparable and there is semantic inter-operability. This paper describes the development of a standard terminology for anaesthesia and also a Domain Analysis Model and implementation guide to facilitate a standard representation of AIMS records as extensible markup language documents that are compliant with the Health Level 7 Version 3 clinical document architecture. A representation of vital signs that is compliant with the International Standards Organization 11073 standard is also discussed.

caCORE version 3: Implementation of a model driven, service-oriented architecture for semantic interoperability.

PubMed

Komatsoulis, George A; Warzel, Denise B; Hartel, Francis W; Shanbhag, Krishnakant; Chilukuri, Ram; Fragoso, Gilberto; Coronado, Sherri de; Reeves, Dianne M; Hadfield, Jillaine B; Ludet, Christophe; Covitz, Peter A

2008-02-01

One of the requirements for a federated information system is interoperability, the ability of one computer system to access and use the resources of another system. This feature is particularly important in biomedical research systems, which need to coordinate a variety of disparate types of data. In order to meet this need, the National Cancer Institute Center for Bioinformatics (NCICB) has created the cancer Common Ontologic Representation Environment (caCORE), an interoperability infrastructure based on Model Driven Architecture. The caCORE infrastructure provides a mechanism to create interoperable biomedical information systems. Systems built using the caCORE paradigm address both aspects of interoperability: the ability to access data (syntactic interoperability) and understand the data once retrieved (semantic interoperability). This infrastructure consists of an integrated set of three major components: a controlled terminology service (Enterprise Vocabulary Services), a standards-based metadata repository (the cancer Data Standards Repository) and an information system with an Application Programming Interface (API) based on Domain Model Driven Architecture. This infrastructure is being leveraged to create a Semantic Service-Oriented Architecture (SSOA) for cancer research by the National Cancer Institute's cancer Biomedical Informatics Grid (caBIG).

caCORE version 3: Implementation of a model driven, service-oriented architecture for semantic interoperability

PubMed Central

Komatsoulis, George A.; Warzel, Denise B.; Hartel, Frank W.; Shanbhag, Krishnakant; Chilukuri, Ram; Fragoso, Gilberto; de Coronado, Sherri; Reeves, Dianne M.; Hadfield, Jillaine B.; Ludet, Christophe; Covitz, Peter A.

2008-01-01

One of the requirements for a federated information system is interoperability, the ability of one computer system to access and use the resources of another system. This feature is particularly important in biomedical research systems, which need to coordinate a variety of disparate types of data. In order to meet this need, the National Cancer Institute Center for Bioinformatics (NCICB) has created the cancer Common Ontologic Representation Environment (caCORE), an interoperability infrastructure based on Model Driven Architecture. The caCORE infrastructure provides a mechanism to create interoperable biomedical information systems. Systems built using the caCORE paradigm address both aspects of interoperability: the ability to access data (syntactic interoperability) and understand the data once retrieved (semantic interoperability). This infrastructure consists of an integrated set of three major components: a controlled terminology service (Enterprise Vocabulary Services), a standards-based metadata repository (the cancer Data Standards Repository) and an information system with an Application Programming Interface (API) based on Domain Model Driven Architecture. This infrastructure is being leveraged to create a Semantic Service Oriented Architecture (SSOA) for cancer research by the National Cancer Institute’s cancer Biomedical Informatics Grid (caBIG™). PMID:17512259

HL7 and DICOM based integration of radiology departments with healthcare enterprise information systems.

PubMed

Blazona, Bojan; Koncar, Miroslav

2007-12-01

Integration based on open standards, in order to achieve communication and information interoperability, is one of the key aspects of modern health care information systems. However, this requirement represents one of the major challenges for the Information and Communication Technology (ICT) solutions, as systems today use diverse technologies, proprietary protocols and communication standards which are often not interoperable. One of the main producers of clinical information in healthcare settings represent Radiology Information Systems (RIS) that communicate using widely adopted DICOM (Digital Imaging and COmmunications in Medicine) standard, but in very few cases can efficiently integrate information of interest with other systems. In this context we identified HL7 standard as the world's leading medical ICT standard that is envisioned to provide the umbrella for medical data semantic interoperability, which amongst other things represents the cornerstone for the Croatia's National Integrated Healthcare Information System (IHCIS). The aim was to explore the ability to integrate and exchange RIS originated data with Hospital Information Systems based on HL7's CDA (Clinical Document Architecture) standard. We explored the ability of HL7 CDA specifications and methodology to address the need of RIS integration HL7 based healthcare information systems. We introduced the use of WADO service interconnection to IHCIS and finally CDA rendering in widely used Internet explorers. The outcome of our pilot work proves our original assumption of HL7 standard being able to adopt radiology data into the integrated healthcare systems. Uniform DICOM to CDA translation scripts and business processes within IHCIS is desired and cost effective regarding to use of supporting IHCIS services aligned to SOA.

Interoperable Data Sharing for Diverse Scientific Disciplines

NASA Astrophysics Data System (ADS)

Hughes, John S.; Crichton, Daniel; Martinez, Santa; Law, Emily; Hardman, Sean

2016-04-01

For diverse scientific disciplines to interoperate they must be able to exchange information based on a shared understanding. To capture this shared understanding, we have developed a knowledge representation framework using ontologies and ISO level archive and metadata registry reference models. This framework provides multi-level governance, evolves independent of implementation technologies, and promotes agile development, namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. The knowledge representation framework is populated through knowledge acquisition from discipline experts. It is also extended to meet specific discipline requirements. The result is a formalized and rigorous knowledge base that addresses data representation, integrity, provenance, context, quantity, and their relationships within the community. The contents of the knowledge base is translated and written to files in appropriate formats to configure system software and services, provide user documentation, validate ingested data, and support data analytics. This presentation will provide an overview of the framework, present the Planetary Data System's PDS4 as a use case that has been adopted by the international planetary science community, describe how the framework is being applied to other disciplines, and share some important lessons learned.

A Working Framework for Enabling International Science Data System Interoperability

NASA Astrophysics Data System (ADS)

Hughes, J. Steven; Hardman, Sean; Crichton, Daniel J.; Martinez, Santa; Law, Emily; Gordon, Mitchell K.

2016-07-01

For diverse scientific disciplines to interoperate they must be able to exchange information based on a shared understanding. To capture this shared understanding, we have developed a knowledge representation framework that leverages ISO level reference models for metadata registries and digital archives. This framework provides multi-level governance, evolves independent of the implementation technologies, and promotes agile development, namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. The knowledge representation is captured in an ontology through a process of knowledge acquisition. Discipline experts in the role of stewards at the common, discipline, and project levels work to design and populate the ontology model. The result is a formal and consistent knowledge base that provides requirements for data representation, integrity, provenance, context, identification, and relationship. The contents of the knowledge base are translated and written to files in suitable formats to configure system software and services, provide user documentation, validate input, and support data analytics. This presentation will provide an overview of the framework, present a use case that has been adopted by an entire science discipline at the international level, and share some important lessons learned.

Military Interoperable Digital Hospital Testbed (MIDHT) Phase III

DTIC Science & Technology

2012-10-01

October 2012 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick...Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188...MONITOR’S ACRONYM(S) U.S. Army Medical Research and M Materiel Command 11. SPONSOR/MONITOR’S REPORT Fort Detrick, MD 21702 NUMBER(S

Plug-and-play initiative : phase II : final report.

DOT National Transportation Integrated Search

2017-01-01

Clear Roads has undertaken an initiative to establish a Plug-and-Play protocol that fosters interoperability between various winter maintenance equipment and a point location (central office). This report documents the data types and communication me...

Semantic Document Model to Enhance Data and Knowledge Interoperability

NASA Astrophysics Data System (ADS)

Nešić, Saša

To enable document data and knowledge to be efficiently shared and reused across application, enterprise, and community boundaries, desktop documents should be completely open and queryable resources, whose data and knowledge are represented in a form understandable to both humans and machines. At the same time, these are the requirements that desktop documents need to satisfy in order to contribute to the visions of the Semantic Web. With the aim of achieving this goal, we have developed the Semantic Document Model (SDM), which turns desktop documents into Semantic Documents as uniquely identified and semantically annotated composite resources, that can be instantiated into human-readable (HR) and machine-processable (MP) forms. In this paper, we present the SDM along with an RDF and ontology-based solution for the MP document instance. Moreover, on top of the proposed model, we have built the Semantic Document Management System (SDMS), which provides a set of services that exploit the model. As an application example that takes advantage of SDMS services, we have extended MS Office with a set of tools that enables users to transform MS Office documents (e.g., MS Word and MS PowerPoint) into Semantic Documents, and to search local and distant semantic document repositories for document content units (CUs) over Semantic Web protocols.

GMSEC Interface Specification Document 2016 March

NASA Technical Reports Server (NTRS)

Handy, Matthew

2016-01-01

The GMSEC Interface Specification Document contains the standard set of defined messages. Each GMSEC standard message contains a GMSEC Information Bus Header section and a Message Contents section. Each message section identifies required fields, optional fields, data type and recommended use of the fields. Additionally, this document includes the message subjects associated with the standard messages. The system design of the operations center should ensure the components that are selected use both the API and the defined standard messages in order to achieve full interoperability from component to component.

Connected Vehicle Pilot Deployment Program Phase 1, Outreach Plan – Tampa (THEA).

DOT National Transportation Integrated Search

2016-07-06

This document presents the Outreach Plan for the Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment. The goal of the pilot deployment is to advance and enable safe, interoperable, networked wireless communications ...

Reminiscing about 15 years of interoperability efforts

DOE PAGES

Van de Sompel, Herbert; Nelson, Michael L.

2015-11-01

Over the past fifteen years, our perspective on tackling information interoperability problems for web-based scholarship has evolved significantly. In this opinion piece, we look back at three efforts that we have been involved in that aptly illustrate this evolution: OAI-PMH, OAI-ORE, and Memento. Understanding that no interoperability specification is neutral, we attempt to characterize the perspectives and technical toolkits that provided the basis for these endeavors. With that regard, we consider repository-centric and web-centric interoperability perspectives, and the use of a Linked Data or a REST/HATEAOS technology stack, respectively. In addition, we lament the lack of interoperability across nodes thatmore » play a role in web-based scholarship, but end on a constructive note with some ideas regarding a possible path forward.« less

How to improve vital sign data quality for use in clinical decision support systems? A qualitative study in nine Swedish emergency departments.

PubMed

Skyttberg, Niclas; Vicente, Joana; Chen, Rong; Blomqvist, Hans; Koch, Sabine

2016-06-04

Vital sign data are important for clinical decision making in emergency care. Clinical Decision Support Systems (CDSS) have been advocated to increase patient safety and quality of care. However, the efficiency of CDSS depends on the quality of the underlying vital sign data. Therefore, possible factors affecting vital sign data quality need to be understood. This study aims to explore the factors affecting vital sign data quality in Swedish emergency departments and to determine in how far clinicians perceive vital sign data to be fit for use in clinical decision support systems. A further aim of the study is to provide recommendations on how to improve vital sign data quality in emergency departments. Semi-structured interviews were conducted with sixteen physicians and nurses from nine hospitals and vital sign documentation templates were collected and analysed. Follow-up interviews and process observations were done at three of the hospitals to verify the results. Content analysis with constant comparison of the data was used to analyse and categorize the collected data. Factors related to care process and information technology were perceived to affect vital sign data quality. Despite electronic health records (EHRs) being available in all hospitals, these were not always used for vital sign documentation. Only four out of nine sites had a completely digitalized vital sign documentation flow and paper-based triage records were perceived to provide a better mobile workflow support than EHRs. Observed documentation practices resulted in low currency, completeness, and interoperability of the vital signs. To improve vital sign data quality, we propose to standardize the care process, improve the digital documentation support, provide workflow support, ensure interoperability and perform quality control. Vital sign data quality in Swedish emergency departments is currently not fit for use by CDSS. To address both technical and organisational challenges, we propose five steps for vital sign data quality improvement to be implemented in emergency care settings.

Connected vehicle pilot deployment program phase 1, safety management plan – Tampa (THEA).

DOT National Transportation Integrated Search

2016-04-01

This document presents the Safety Management Plan for the THEA Connected Vehicle (CV) Pilot Deployment. The THEA CV Pilot Deployment goal is to advance and enable safe, interoperable, networked wireless communications among vehicles, the infrastructu...

Semantic enrichment of medical forms - semi-automated coding of ODM-elements via web services.

PubMed

Breil, Bernhard; Watermann, Andreas; Haas, Peter; Dziuballe, Philipp; Dugas, Martin

2012-01-01

Semantic interoperability is an unsolved problem which occurs while working with medical forms from different information systems or institutions. Standards like ODM or CDA assure structural homogenization but in order to compare elements from different data models it is necessary to use semantic concepts and codes on an item level of those structures. We developed and implemented a web-based tool which enables a domain expert to perform semi-automated coding of ODM-files. For each item it is possible to inquire web services which result in unique concept codes without leaving the context of the document. Although it was not feasible to perform a totally automated coding we have implemented a dialog based method to perform an efficient coding of all data elements in the context of the whole document. The proportion of codable items was comparable to results from previous studies.

An open repositories network development for medical teaching resources.

PubMed

Soula, Gérard; Darmoni, Stefan; Le Beux, Pierre; Renard, Jean-Marie; Dahamna, Badisse; Fieschi, Marius

2010-01-01

The lack of interoperability between repositories of heterogeneous and geographically widespread data is an obstacle to the diffusion, sharing and reutilization of those data. We present the development of an open repositories network taking into account both the syntactic and semantic interoperability of the different repositories and based on international standards in this field. The network is used by the medical community in France for the diffusion and sharing of digital teaching resources. The syntactic interoperability of the repositories is managed using the OAI-PMH protocol for the exchange of metadata describing the resources. Semantic interoperability is based, on one hand, on the LOM standard for the description of resources and on MESH for the indexing of the latter and, on the other hand, on semantic interoperability management designed to optimize compliance with standards and the quality of the metadata.

Test Protocols for Advanced Inverter Interoperability Functions – Main Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not currently required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

A cloud-based approach for interoperable electronic health records (EHRs).

PubMed

Bahga, Arshdeep; Madisetti, Vijay K

2013-09-01

We present a cloud-based approach for the design of interoperable electronic health record (EHR) systems. Cloud computing environments provide several benefits to all the stakeholders in the healthcare ecosystem (patients, providers, payers, etc.). Lack of data interoperability standards and solutions has been a major obstacle in the exchange of healthcare data between different stakeholders. We propose an EHR system - cloud health information systems technology architecture (CHISTAR) that achieves semantic interoperability through the use of a generic design methodology which uses a reference model that defines a general purpose set of data structures and an archetype model that defines the clinical data attributes. CHISTAR application components are designed using the cloud component model approach that comprises of loosely coupled components that communicate asynchronously. In this paper, we describe the high-level design of CHISTAR and the approaches for semantic interoperability, data integration, and security.

The role of architecture and ontology for interoperability.

PubMed

Blobel, Bernd; González, Carolina; Oemig, Frank; Lopéz, Diego; Nykänen, Pirkko; Ruotsalainen, Pekka

2010-01-01

Turning from organization-centric to process-controlled or even to personalized approaches, advanced healthcare settings have to meet special interoperability challenges. eHealth and pHealth solutions must assure interoperability between actors cooperating to achieve common business objectives. Hereby, the interoperability chain also includes individually tailored technical systems, but also sensors and actuators. For enabling corresponding pervasive computing and even autonomic computing, individualized systems have to be based on an architecture framework covering many domains, scientifically managed by specialized disciplines using their specific ontologies in a formalized way. Therefore, interoperability has to advance from a communication protocol to an architecture-centric approach mastering ontology coordination challenges.

C2 Core and UCore Message Design Capstone: Interoperable Message Structure

DTIC Science & Technology

2009-09-01

there are sufficient resources to carry out a mission. The Team used the Theatre Battle Management Command System ( TBMCS ) to generate sample CMD...System ( TBMCS ) was used to generate CMD messages as inputs for both use cases. These were programmatically transformed into the three-layer message...used for the experiment was generated from the TBMCS in the form of a CMD XML document. The Capstone experiment included transforming that document to

NETMARK

NASA Technical Reports Server (NTRS)

Maluf, David A.; Koga, Dennis (Technical Monitor)

2002-01-01

This presentation discuss NASA's proposed NETMARK knowledge management tool which aims 'to control and interoperate with every block in a document, email, spreadsheet, power point, database, etc. across the lifecycle'. Topics covered include: system software requirements and hardware requirements, seamless information systems, computer architecture issues, and potential benefits to NETMARK users.

The caCORE Software Development Kit: streamlining construction of interoperable biomedical information services.

PubMed

Phillips, Joshua; Chilukuri, Ram; Fragoso, Gilberto; Warzel, Denise; Covitz, Peter A

2006-01-06

Robust, programmatically accessible biomedical information services that syntactically and semantically interoperate with other resources are challenging to construct. Such systems require the adoption of common information models, data representations and terminology standards as well as documented application programming interfaces (APIs). The National Cancer Institute (NCI) developed the cancer common ontologic representation environment (caCORE) to provide the infrastructure necessary to achieve interoperability across the systems it develops or sponsors. The caCORE Software Development Kit (SDK) was designed to provide developers both within and outside the NCI with the tools needed to construct such interoperable software systems. The caCORE SDK requires a Unified Modeling Language (UML) tool to begin the development workflow with the construction of a domain information model in the form of a UML Class Diagram. Models are annotated with concepts and definitions from a description logic terminology source using the Semantic Connector component. The annotated model is registered in the Cancer Data Standards Repository (caDSR) using the UML Loader component. System software is automatically generated using the Codegen component, which produces middleware that runs on an application server. The caCORE SDK was initially tested and validated using a seven-class UML model, and has been used to generate the caCORE production system, which includes models with dozens of classes. The deployed system supports access through object-oriented APIs with consistent syntax for retrieval of any type of data object across all classes in the original UML model. The caCORE SDK is currently being used by several development teams, including by participants in the cancer biomedical informatics grid (caBIG) program, to create compatible data services. caBIG compatibility standards are based upon caCORE resources, and thus the caCORE SDK has emerged as a key enabling technology for caBIG. The caCORE SDK substantially lowers the barrier to implementing systems that are syntactically and semantically interoperable by providing workflow and automation tools that standardize and expedite modeling, development, and deployment. It has gained acceptance among developers in the caBIG program, and is expected to provide a common mechanism for creating data service nodes on the data grid that is under development.

Facilitating Semantic Interoperability Among Ocean Data Systems: ODIP-R2R Student Outcomes

NASA Astrophysics Data System (ADS)

Stocks, K. I.; Chen, Y.; Shepherd, A.; Chandler, C. L.; Dockery, N.; Elya, J. L.; Smith, S. R.; Ferreira, R.; Fu, L.; Arko, R. A.

2014-12-01

With informatics providing an increasingly important set of tools for geoscientists, it is critical to train the next generation of scientists in information and data techniques. The NSF-supported Rolling Deck to Repository (R2R) Program works with the academic fleet community to routinely document, assess, and preserve the underway sensor data from U.S. research vessels. The Ocean Data Interoperability Platform (ODIP) is an EU-US-Australian collaboration fostering interoperability among regional e-infrastructures through workshops and joint prototype development. The need to align terminology between systems is a common challenge across all of the ODIP prototypes. Five R2R students were supported to address aspects of semantic interoperability within ODIP. Developing a vocabulary matching service that links terms from different vocabularies with similar concept. The service implements Google Refine reconciliation service interface such that users can leverage Google Refine application as a friendly user interface while linking different vocabulary terms. Developing Resource Description Framework (RDF) resources that map Shipboard Automated Meteorological Oceanographic System (SAMOS) vocabularies to internationally served vocabularies. Each SAMOS vocabulary term (data parameter and quality control flag) will be described as an RDF resource page. These RDF resources allow for enhanced discoverability and retrieval of SAMOS data by enabling data searches based on parameter. Improving data retrieval and interoperability by exposing data and mapped vocabularies using Semantic Web technologies. We have collaborated with ODIP participating organizations in order to build a generalized data model that will be used to populate a SPARQL endpoint in order to provide expressive querying over our data files. Mapping local and regional vocabularies used by R2R to those used by ODIP partners. This work is described more fully in a companion poster. Making published Linked Data Web developer-friendly with a RESTful service. This goal was achieved by defining a proxy layer on top of the existing SPARQL endpoint that 1) translates HTTP requests into SPARQL queries, and 2) renders the returned results as required by the request sender using content negotiation, suffixes and parameters.

Defining the Collision Avoidance Region for DAA Systems

NASA Technical Reports Server (NTRS)

Thipphavong, David; Cone, Andrew; Park, Chunki; Lee, Seung Man; Santiago, Confesor

2016-01-01

Unmanned aircraft systems (UAS) will be required to equip with a detect-­-and-­-avoid (DAA) system in order to satisfy the federal aviation regulations to maintain well clear of other aircraft, some of which may be equipped with a Traffic Collision Avoidance System (TCAS) to mitigate the possibility of mid-­-air collisions. As such, the minimum operational performance standards (MOPS) for UAS DAA systems are being designed with TCAS interoperability in mind by a group of industry, government, and academic institutions named RTCA Special Committee-228 (SC-228). This document will discuss the development of the spatial-­-temporal volume known as the collision avoidance region in which the DAA system is not allowed to provide vertical guidance to maintain or regain DAA well clear that could conflict with resolution advisories (RAs) issued by the intruder aircraft's TCAS system. Three collision avoidance region definition candidates were developed based on the existing TCAS RA and DAA alerting definitions. They were evaluated against each other in terms of their interoperability with TCAS RAs and DAA alerts in an unmitigated factorial encounter analysis of 1.3 million simulated pairs.

Documenting Models for Interoperability and Reusability ...

EPA Pesticide Factsheets

Many modeling frameworks compartmentalize science via individual models that link sets of small components to create larger modeling workflows. Developing integrated watershed models increasingly requires coupling multidisciplinary, independent models, as well as collaboration between scientific communities, since component-based modeling can integrate models from different disciplines. Integrated Environmental Modeling (IEM) systems focus on transferring information between components by capturing a conceptual site model; establishing local metadata standards for input/output of models and databases; managing data flow between models and throughout the system; facilitating quality control of data exchanges (e.g., checking units, unit conversions, transfers between software languages); warning and error handling; and coordinating sensitivity/uncertainty analyses. Although many computational software systems facilitate communication between, and execution of, components, there are no common approaches, protocols, or standards for turn-key linkages between software systems and models, especially if modifying components is not the intent. Using a standard ontology, this paper reviews how models can be described for discovery, understanding, evaluation, access, and implementation to facilitate interoperability and reusability. In the proceedings of the International Environmental Modelling and Software Society (iEMSs), 8th International Congress on Environmental Mod

[InlineEquation not available: see fulltext.]-Means Based Fingerprint Segmentation with Sensor Interoperability

NASA Astrophysics Data System (ADS)

Yang, Gongping; Zhou, Guang-Tong; Yin, Yilong; Yang, Xiukun

2010-12-01

A critical step in an automatic fingerprint recognition system is the segmentation of fingerprint images. Existing methods are usually designed to segment fingerprint images originated from a certain sensor. Thus their performances are significantly affected when dealing with fingerprints collected by different sensors. This work studies the sensor interoperability of fingerprint segmentation algorithms, which refers to the algorithm's ability to adapt to the raw fingerprints obtained from different sensors. We empirically analyze the sensor interoperability problem, and effectively address the issue by proposing a [InlineEquation not available: see fulltext.]-means based segmentation method called SKI. SKI clusters foreground and background blocks of a fingerprint image based on the [InlineEquation not available: see fulltext.]-means algorithm, where a fingerprint block is represented by a 3-dimensional feature vector consisting of block-wise coherence, mean, and variance (abbreviated as CMV). SKI also employs morphological postprocessing to achieve favorable segmentation results. We perform SKI on each fingerprint to ensure sensor interoperability. The interoperability and robustness of our method are validated by experiments performed on a number of fingerprint databases which are obtained from various sensors.

On the formal definition of the systems' interoperability capability: an anthropomorphic approach

NASA Astrophysics Data System (ADS)

Zdravković, Milan; Luis-Ferreira, Fernando; Jardim-Goncalves, Ricardo; Trajanović, Miroslav

2017-03-01

The extended view of enterprise information systems in the Internet of Things (IoT) introduces additional complexity to the interoperability problems. In response to this, the problem of systems' interoperability is revisited by taking into the account the different aspects of philosophy, psychology, linguistics and artificial intelligence, namely by analysing the potential analogies between the processes of human and system communication. Then, the capability to interoperate as a property of the system, is defined as a complex ability to seamlessly sense and perceive a stimulus from its environment (assumingly, a message from any other system), make an informed decision about this perception and consequently, articulate a meaningful and useful action or response, based on this decision. Although this capability is defined on the basis of the existing interoperability theories, the proposed approach to its definition excludes the assumption on the awareness of co-existence of two interoperating systems. Thus, it establishes the links between the research of interoperability of systems and intelligent software agents, as one of the systems' digital identities.

Employing Semantic Technologies for the Orchestration of Government Services

NASA Astrophysics Data System (ADS)

Sabol, Tomáš; Furdík, Karol; Mach, Marián

The main aim of the eGovernment is to provide efficient, secure, inclusive services for its citizens and businesses. The necessity to integrate services and information resources, to increase accessibility, to reduce the administrative burden on citizens and enterprises - these are only a few reasons why the paradigm of the eGovernment has been shifted from the supply-driven approach toward the connected governance, emphasizing the concept of interoperability (Archmann and Nielsen 2008). On the EU level, the interoperability is explicitly addressed as one of the four main challenges, including in the i2010 strategy (i2010 2005). The Commission's Communication (Interoperability for Pan-European eGovernment Services 2006) strongly emphasizes the necessity of interoperable eGovernment services, based on standards, open specifications, and open interfaces. The Pan-European interoperability initiatives, such as the European Interoperability Framework (2004) and IDABC, as well as many projects supported by the European Commission within the IST Program and the Competitiveness and Innovation Program (CIP), illustrate the importance of interoperability on the EU level.

A framework for semantic interoperability in healthcare: a service oriented architecture based on health informatics standards.

PubMed

Ryan, Amanda; Eklund, Peter

2008-01-01

Healthcare information is composed of many types of varying and heterogeneous data. Semantic interoperability in healthcare is especially important when all these different types of data need to interact. Presented in this paper is a solution to interoperability in healthcare based on a standards-based middleware software architecture used in enterprise solutions. This architecture has been translated into the healthcare domain using a messaging and modeling standard which upholds the ideals of the Semantic Web (HL7 V3) combined with a well-known standard terminology of clinical terms (SNOMED CT).

Enabling interoperability in planetary sciences and heliophysics: The case for an information model

NASA Astrophysics Data System (ADS)

Hughes, J. Steven; Crichton, Daniel J.; Raugh, Anne C.; Cecconi, Baptiste; Guinness, Edward A.; Isbell, Christopher E.; Mafi, Joseph N.; Gordon, Mitchell K.; Hardman, Sean H.; Joyner, Ronald S.

2018-01-01

The Planetary Data System has developed the PDS4 Information Model to enable interoperability across diverse science disciplines. The Information Model is based on an integration of International Organization for Standardization (ISO) level standards for trusted digital archives, information model development, and metadata registries. Where controlled vocabularies provides a basic level of interoperability by providing a common set of terms for communication between both machines and humans the Information Model improves interoperability by means of an ontology that provides semantic information or additional related context for the terms. The information model was defined by team of computer scientists and science experts from each of the diverse disciplines in the Planetary Science community, including Atmospheres, Geosciences, Cartography and Imaging Sciences, Navigational and Ancillary Information, Planetary Plasma Interactions, Ring-Moon Systems, and Small Bodies. The model was designed to be extensible beyond the Planetary Science community, for example there are overlaps between certain PDS disciplines and the Heliophysics and Astrophysics disciplines. "Interoperability" can apply to many aspects of both the developer and the end-user experience, for example agency-to-agency, semantic level, and application level interoperability. We define these types of interoperability and focus on semantic level interoperability, the type of interoperability most directly enabled by an information model.

RESTFul based heterogeneous Geoprocessing workflow interoperation for Sensor Web Service

NASA Astrophysics Data System (ADS)

Yang, Chao; Chen, Nengcheng; Di, Liping

2012-10-01

Advanced sensors on board satellites offer detailed Earth observations. A workflow is one approach for designing, implementing and constructing a flexible and live link between these sensors' resources and users. It can coordinate, organize and aggregate the distributed sensor Web services to meet the requirement of a complex Earth observation scenario. A RESTFul based workflow interoperation method is proposed to integrate heterogeneous workflows into an interoperable unit. The Atom protocols are applied to describe and manage workflow resources. The XML Process Definition Language (XPDL) and Business Process Execution Language (BPEL) workflow standards are applied to structure a workflow that accesses sensor information and one that processes it separately. Then, a scenario for nitrogen dioxide (NO2) from a volcanic eruption is used to investigate the feasibility of the proposed method. The RESTFul based workflows interoperation system can describe, publish, discover, access and coordinate heterogeneous Geoprocessing workflows.

Clinical data interoperability based on archetype transformation.

PubMed

Costa, Catalina Martínez; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2011-10-01

The semantic interoperability between health information systems is a major challenge to improve the quality of clinical practice and patient safety. In recent years many projects have faced this problem and provided solutions based on specific standards and technologies in order to satisfy the needs of a particular scenario. Most of such solutions cannot be easily adapted to new scenarios, thus more global solutions are needed. In this work, we have focused on the semantic interoperability of electronic healthcare records standards based on the dual model architecture and we have developed a solution that has been applied to ISO 13606 and openEHR. The technological infrastructure combines reference models, archetypes and ontologies, with the support of Model-driven Engineering techniques. For this purpose, the interoperability infrastructure developed in previous work by our group has been reused and extended to cover the requirements of data transformation. Copyright © 2011 Elsevier Inc. All rights reserved.

Standard Information Models for Representing Adverse Sensitivity Information in Clinical Documents.

PubMed

Topaz, M; Seger, D L; Goss, F; Lai, K; Slight, S P; Lau, J J; Nandigam, H; Zhou, L

2016-01-01

Adverse sensitivity (e.g., allergy and intolerance) information is a critical component of any electronic health record system. While several standards exist for structured entry of adverse sensitivity information, many clinicians record this data as free text. This study aimed to 1) identify and compare the existing common adverse sensitivity information models, and 2) to evaluate the coverage of the adverse sensitivity information models for representing allergy information on a subset of inpatient and outpatient adverse sensitivity clinical notes. We compared four common adverse sensitivity information models: Health Level 7 Allergy and Intolerance Domain Analysis Model, HL7-DAM; the Fast Healthcare Interoperability Resources, FHIR; the Consolidated Continuity of Care Document, C-CDA; and OpenEHR, and evaluated their coverage on a corpus of inpatient and outpatient notes (n = 120). We found that allergy specialists' notes had the highest frequency of adverse sensitivity attributes per note, whereas emergency department notes had the fewest attributes. Overall, the models had many similarities in the central attributes which covered between 75% and 95% of adverse sensitivity information contained within the notes. However, representations of some attributes (especially the value-sets) were not well aligned between the models, which is likely to present an obstacle for achieving data interoperability. Also, adverse sensitivity exceptions were not well represented among the information models. Although we found that common adverse sensitivity models cover a significant portion of relevant information in the clinical notes, our results highlight areas needed to be reconciled between the standards for data interoperability.

Interoperability in Personalized Adaptive Learning

ERIC Educational Resources Information Center

Aroyo, Lora; Dolog, Peter; Houben, Geert-Jan; Kravcik, Milos; Naeve, Ambjorn; Nilsson, Mikael; Wild, Fridolin

2006-01-01

Personalized adaptive learning requires semantic-based and context-aware systems to manage the Web knowledge efficiently as well as to achieve semantic interoperability between heterogeneous information resources and services. The technological and conceptual differences can be bridged either by means of standards or via approaches based on the…

tmBioC: improving interoperability of text-mining tools with BioC.

PubMed

Khare, Ritu; Wei, Chih-Hsuan; Mao, Yuqing; Leaman, Robert; Lu, Zhiyong

2014-01-01

The lack of interoperability among biomedical text-mining tools is a major bottleneck in creating more complex applications. Despite the availability of numerous methods and techniques for various text-mining tasks, combining different tools requires substantial efforts and time owing to heterogeneity and variety in data formats. In response, BioC is a recent proposal that offers a minimalistic approach to tool interoperability by stipulating minimal changes to existing tools and applications. BioC is a family of XML formats that define how to present text documents and annotations, and also provides easy-to-use functions to read/write documents in the BioC format. In this study, we introduce our text-mining toolkit, which is designed to perform several challenging and significant tasks in the biomedical domain, and repackage the toolkit into BioC to enhance its interoperability. Our toolkit consists of six state-of-the-art tools for named-entity recognition, normalization and annotation (PubTator) of genes (GenNorm), diseases (DNorm), mutations (tmVar), species (SR4GN) and chemicals (tmChem). Although developed within the same group, each tool is designed to process input articles and output annotations in a different format. We modify these tools and enable them to read/write data in the proposed BioC format. We find that, using the BioC family of formats and functions, only minimal changes were required to build the newer versions of the tools. The resulting BioC wrapped toolkit, which we have named tmBioC, consists of our tools in BioC, an annotated full-text corpus in BioC, and a format detection and conversion tool. Furthermore, through participation in the 2013 BioCreative IV Interoperability Track, we empirically demonstrate that the tools in tmBioC can be more efficiently integrated with each other as well as with external tools: Our experimental results show that using BioC reduces >60% in lines of code for text-mining tool integration. The tmBioC toolkit is publicly available at http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/Demo/tmTools/. Database URL: http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/Demo/tmTools/. Published by Oxford University Press 2014. This work is written by US Government employees and is in the public domain in the US.

Semantics-Based Interoperability Framework for the Geosciences

NASA Astrophysics Data System (ADS)

Sinha, A.; Malik, Z.; Raskin, R.; Barnes, C.; Fox, P.; McGuinness, D.; Lin, K.

2008-12-01

Interoperability between heterogeneous data, tools and services is required to transform data to knowledge. To meet geoscience-oriented societal challenges such as forcing of climate change induced by volcanic eruptions, we suggest the need to develop semantic interoperability for data, services, and processes. Because such scientific endeavors require integration of multiple data bases associated with global enterprises, implicit semantic-based integration is impossible. Instead, explicit semantics are needed to facilitate interoperability and integration. Although different types of integration models are available (syntactic or semantic) we suggest that semantic interoperability is likely to be the most successful pathway. Clearly, the geoscience community would benefit from utilization of existing XML-based data models, such as GeoSciML, WaterML, etc to rapidly advance semantic interoperability and integration. We recognize that such integration will require a "meanings-based search, reasoning and information brokering", which will be facilitated through inter-ontology relationships (ontologies defined for each discipline). We suggest that Markup languages (MLs) and ontologies can be seen as "data integration facilitators", working at different abstraction levels. Therefore, we propose to use an ontology-based data registration and discovery approach to compliment mark-up languages through semantic data enrichment. Ontologies allow the use of formal and descriptive logic statements which permits expressive query capabilities for data integration through reasoning. We have developed domain ontologies (EPONT) to capture the concept behind data. EPONT ontologies are associated with existing ontologies such as SUMO, DOLCE and SWEET. Although significant efforts have gone into developing data (object) ontologies, we advance the idea of developing semantic frameworks for additional ontologies that deal with processes and services. This evolutionary step will facilitate the integrative capabilities of scientists as we examine the relationships between data and external factors such as processes that may influence our understanding of "why" certain events happen. We emphasize the need to go from analysis of data to concepts related to scientific principles of thermodynamics, kinetics, heat flow, mass transfer, etc. Towards meeting these objectives, we report on a pair of related service engines: DIA (Discovery, integration and analysis), and SEDRE (Semantically-Enabled Data Registration Engine) that utilize ontologies for semantic interoperability and integration.

Transportation communications interoperability : phase 2, resource evaluation.

DOT National Transportation Integrated Search

2006-12-01

Based on the Arizona Department of Transportations (ADOT) previous SPR-561 Needs Assessment study, this : report continues the efforts to enhance radio interoperability between Department of Public Safety (DPS) Highway : Patrol officers and ...

XDS-I outsourcing proxy: ensuring confidentiality while preserving interoperability.

PubMed

Ribeiro, Luís S; Viana-Ferreira, Carlos; Oliveira, José Luís; Costa, Carlos

2014-07-01

The interoperability of services and the sharing of health data have been a continuous goal for health professionals, patients, institutions, and policy makers. However, several issues have been hindering this goal, such as incompatible implementations of standards (e.g., HL7, DICOM), multiple ontologies, and security constraints. Cross-enterprise document sharing (XDS) workflows were proposed by Integrating the Healthcare Enterprise (IHE) to address current limitations in exchanging clinical data among organizations. To ensure data protection, XDS actors must be placed in trustworthy domains, which are normally inside such institutions. However, due to rapidly growing IT requirements, the outsourcing of resources in the Cloud is becoming very appealing. This paper presents a software proxy that enables the outsourcing of XDS architectural parts while preserving the interoperability, confidentiality, and searchability of clinical information. A key component in our architecture is a new searchable encryption (SE) scheme-Posterior Playfair Searchable Encryption (PPSE)-which, besides keeping the same confidentiality levels of the stored data, hides the search patterns to the adversary, bringing improvements when compared to the remaining practical state-of-the-art SE schemes.

78 FR 63964 - Request for Comments on Draft NIST Interagency Report (NISTIR) 7628 Rev. 1, Guidelines for Smart...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Grid Cyber Security AGENCY: National Institute of Standards and Technology (NIST), Department of... and Technology (NIST) seeks comments on draft NISTIR 7628 Rev. 1, Guidelines for Smart Grid Cyber... (formerly the Cyber Security Working Group) of the Smart Grid Interoperability Panel. The document has been...

Semantically Interoperable XML Data

PubMed Central

Vergara-Niedermayr, Cristobal; Wang, Fusheng; Pan, Tony; Kurc, Tahsin; Saltz, Joel

2013-01-01

XML is ubiquitously used as an information exchange platform for web-based applications in healthcare, life sciences, and many other domains. Proliferating XML data are now managed through latest native XML database technologies. XML data sources conforming to common XML schemas could be shared and integrated with syntactic interoperability. Semantic interoperability can be achieved through semantic annotations of data models using common data elements linked to concepts from ontologies. In this paper, we present a framework and software system to support the development of semantic interoperable XML based data sources that can be shared through a Grid infrastructure. We also present our work on supporting semantic validated XML data through semantic annotations for XML Schema, semantic validation and semantic authoring of XML data. We demonstrate the use of the system for a biomedical database of medical image annotations and markups. PMID:25298789

Towards semantic interoperability for electronic health records.

PubMed

Garde, Sebastian; Knaup, Petra; Hovenga, Evelyn; Heard, Sam

2007-01-01

In the field of open electronic health records (EHRs), openEHR as an archetype-based approach is being increasingly recognised. It is the objective of this paper to shortly describe this approach, and to analyse how openEHR archetypes impact on health professionals and semantic interoperability. Analysis of current approaches to EHR systems, terminology and standards developments. In addition to literature reviews, we organised face-to-face and additional telephone interviews and tele-conferences with members of relevant organisations and committees. The openEHR archetypes approach enables syntactic interoperability and semantic interpretability -- both important prerequisites for semantic interoperability. Archetypes enable the formal definition of clinical content by clinicians. To enable comprehensive semantic interoperability, the development and maintenance of archetypes needs to be coordinated internationally and across health professions. Domain knowledge governance comprises a set of processes that enable the creation, development, organisation, sharing, dissemination, use and continuous maintenance of archetypes. It needs to be supported by information technology. To enable EHRs, semantic interoperability is essential. The openEHR archetypes approach enables syntactic interoperability and semantic interpretability. However, without coordinated archetype development and maintenance, 'rank growth' of archetypes would jeopardize semantic interoperability. We therefore believe that openEHR archetypes and domain knowledge governance together create the knowledge environment required to adopt EHRs.

ImagePy: an open-source, Python-based and platform-independent software package for boimage analysis.

PubMed

Wang, Anliang; Yan, Xiaolong; Wei, Zhijun

2018-04-27

This note presents the design of a scalable software package named ImagePy for analysing biological images. Our contribution is concentrated on facilitating extensibility and interoperability of the software through decoupling the data model from the user interface. Especially with assistance from the Python ecosystem, this software framework makes modern computer algorithms easier to be applied in bioimage analysis. ImagePy is free and open source software, with documentation and code available at https://github.com/Image-Py/imagepy under the BSD license. It has been tested on the Windows, Mac and Linux operating systems. wzjdlut@dlut.edu.cn or yxdragon@imagepy.org.

The eXtensible ontology development (XOD) principles and tool implementation to support ontology interoperability.

PubMed

He, Yongqun; Xiang, Zuoshuang; Zheng, Jie; Lin, Yu; Overton, James A; Ong, Edison

2018-01-12

Ontologies are critical to data/metadata and knowledge standardization, sharing, and analysis. With hundreds of biological and biomedical ontologies developed, it has become critical to ensure ontology interoperability and the usage of interoperable ontologies for standardized data representation and integration. The suite of web-based Ontoanimal tools (e.g., Ontofox, Ontorat, and Ontobee) support different aspects of extensible ontology development. By summarizing the common features of Ontoanimal and other similar tools, we identified and proposed an "eXtensible Ontology Development" (XOD) strategy and its associated four principles. These XOD principles reuse existing terms and semantic relations from reliable ontologies, develop and apply well-established ontology design patterns (ODPs), and involve community efforts to support new ontology development, promoting standardized and interoperable data and knowledge representation and integration. The adoption of the XOD strategy, together with robust XOD tool development, will greatly support ontology interoperability and robust ontology applications to support data to be Findable, Accessible, Interoperable and Reusable (i.e., FAIR).

Achieving interoperability for metadata registries using comparative object modeling.

PubMed

Park, Yu Rang; Kim, Ju Han

2010-01-01

Achieving data interoperability between organizations relies upon agreed meaning and representation (metadata) of data. For managing and registering metadata, many organizations have built metadata registries (MDRs) in various domains based on international standard for MDR framework, ISO/IEC 11179. Following this trend, two pubic MDRs in biomedical domain have been created, United States Health Information Knowledgebase (USHIK) and cancer Data Standards Registry and Repository (caDSR), from U.S. Department of Health & Human Services and National Cancer Institute (NCI), respectively. Most MDRs are implemented with indiscriminate extending for satisfying organization-specific needs and solving semantic and structural limitation of ISO/IEC 11179. As a result it is difficult to address interoperability among multiple MDRs. In this paper, we propose an integrated metadata object model for achieving interoperability among multiple MDRs. To evaluate this model, we developed an XML Schema Definition (XSD)-based metadata exchange format. We created an XSD-based metadata exporter, supporting both the integrated metadata object model and organization-specific MDR formats.

Home-centered health-enabling technologies and regional health information systems. An integration approach based on international standards.

PubMed

Gietzelt, M; von Bargen, T; Kohlmann, M; Marschollek, M; Schwartze, J; Song, B; Wagner, M; Wolf, K-H; Haux, R

2014-01-01

This article is part of the Focus Theme of Methods of Information in Medicine on "Using Data from Ambient Assisted Living and Smart Homes in Electronic Health Records". In this paper, we present a prototype of a Home-Centered Health-Enabling Technology (HET-HC), which is able to capture, store, merge and process data from various sensor systems at people's home. In addition, we present an architecture designed to integrate HET-HC into an exemplary regional Health Information System (rHIS). rHIS are traditionally document-based to fit to the needs in a clinical context. However, HET-HC are producing continuous data streams for which documents might be an inappropriate representation. Therefore, the HET-HC could register placeholder-documents at rHIS. These placeholder-documents are assembled upon user-authenticated request by the HET-HC and are always up-to-date. Moreover, it is not trivial to find a clinical coding system for continuous sensor data and to make the data machine-readable in order to enhance the interoperability of such systems. Therefore, we propose the use of SNOCAP-HET, which is a nomenclature to describe the context of sensor-based measurements in health-enabling technologies. We present an architectural approach to integrate HET-HC into rHIS. Our solution is the centralized registration of placeholder-documents with rHIS and the decentralized data storage at people's home. We concluded that the presented architecture of integrating HET-HC into rHIS might fit well to the traditional approach of document-based data storage. Data security and privacy issues are also duly considered.

An HLA-Based Approach to Quantify Achievable Performance for Tactical Edge Applications

DTIC Science & Technology

2011-05-01

in: Proceedings of the 2002 Fall Simulation Interoperability Workshop, 02F- SIW -068, Nov 2002. [16] P. Knight, et al. ―WBT RTI Independent...Benchmark Tests: Design, Implementation, and Updated Results‖, in: Proceedings of the 2002 Spring Simulation Interoperability Workshop, 02S- SIW -081, March...Interoperability Workshop, 98F- SIW -085, Nov 1998. [18] S. Ferenci and R. Fujimoto. ―RTI Performance on Shared Memory and Message Passing Architectures‖, in

The GIIDA (Management of the CNR Environmental Data for Interoperability) project

NASA Astrophysics Data System (ADS)

Nativi, S.

2009-04-01

This work presents the GIIDA (Gestione Integrata e Interoperativa dei Dati Ambientali del CNR) inter-departimental project of the Italian National Research Council (CNR). The project is an initiative of the Earth and Environment Department (Dipartimento Terra e Ambiente) of the CNR. GIIDA mission is "To implement the Spatial Information Infrastructure (SII) of CNR for Environmental and Earth Observation data". The project aims to design and develop a multidisciplinary cyber-infrastructure for the management, processing and evaluation of Earth and environmental data. This infrastructure will contribute to the Italian presence in international projects and initiatives, such as: INSPIRE, GMES, GEOSS and SEIS. The main GIIDA goals are: • Networking: To create a network of CNR Institutes for implementing a common information space and sharing spatial resources. • Observation: Re-engineering the environmental observation system of CNR • Modeling: Re-engineering the environmental modeling system del CNR • Processing: Re-engineering the environmental processing system del CNR • Mediation: To define mediation methods and instruments for implementing the international interoperability standards. The project started in July 2008 releasing a specification document of the GIIDA architecture for interoperability and security. Based on these documents, a Call for Proposals was issued in September 2008. GIIDA received 23 proposed pilots from 16 different Institutes belonging to five CNR Departments and from 15 non-CNR Institutions (e.g. three Italian regional administrations, three national research centers, four universities, some SMEs). These pilot were divided into thematic areas. In fact, GIIDA considers seven main thematic areas/domains: • Biodiversity; • Climate Changes; • Air Quality; • Soil and Water Quality; • Risks; • Infrastructures for Research and Public Administrations; • Sea and Marine resources Each of these thematic areas is covered by a Working Group which coordinates the activities and the achievements of the respective pilots. Working Groups are called to develop for each area: 1) a specific Web Portal; 2) a thematic catalog service; 3) a thematic thesaurus service; 4) a thematic Wiki; 5) standard access and view services for thematic resources -such as: datasets, models, and processing services; 6) a couple of significant use scenarios to be demonstrated.

KBWS: an EMBOSS associated package for accessing bioinformatics web services.

PubMed

Oshita, Kazuki; Arakawa, Kazuharu; Tomita, Masaru

2011-04-29

The availability of bioinformatics web-based services is rapidly proliferating, for their interoperability and ease of use. The next challenge is in the integration of these services in the form of workflows, and several projects are already underway, standardizing the syntax, semantics, and user interfaces. In order to deploy the advantages of web services with locally installed tools, here we describe a collection of proxy client tools for 42 major bioinformatics web services in the form of European Molecular Biology Open Software Suite (EMBOSS) UNIX command-line tools. EMBOSS provides sophisticated means for discoverability and interoperability for hundreds of tools, and our package, named the Keio Bioinformatics Web Service (KBWS), adds functionalities of local and multiple alignment of sequences, phylogenetic analyses, and prediction of cellular localization of proteins and RNA secondary structures. This software implemented in C is available under GPL from http://www.g-language.org/kbws/ and GitHub repository http://github.com/cory-ko/KBWS. Users can utilize the SOAP services implemented in Perl directly via WSDL file at http://soap.g-language.org/kbws.wsdl (RPC Encoded) and http://soap.g-language.org/kbws_dl.wsdl (Document/literal).

An approach to define semantics for BPM systems interoperability

NASA Astrophysics Data System (ADS)

Rico, Mariela; Caliusco, María Laura; Chiotti, Omar; Rosa Galli, María

2015-04-01

This article proposes defining semantics for Business Process Management systems interoperability through the ontology of Electronic Business Documents (EBD) used to interchange the information required to perform cross-organizational processes. The semantic model generated allows aligning enterprise's business processes to support cross-organizational processes by matching the business ontology of each business partner with the EBD ontology. The result is a flexible software architecture that allows dynamically defining cross-organizational business processes by reusing the EBD ontology. For developing the semantic model, a method is presented, which is based on a strategy for discovering entity features whose interpretation depends on the context, and representing them for enriching the ontology. The proposed method complements ontology learning techniques that can not infer semantic features not represented in data sources. In order to improve the representation of these entity features, the method proposes using widely accepted ontologies, for representing time entities and relations, physical quantities, measurement units, official country names, and currencies and funds, among others. When the ontologies reuse is not possible, the method proposes identifying whether that feature is simple or complex, and defines a strategy to be followed. An empirical validation of the approach has been performed through a case study.

The caCORE Software Development Kit: Streamlining construction of interoperable biomedical information services

PubMed Central

Phillips, Joshua; Chilukuri, Ram; Fragoso, Gilberto; Warzel, Denise; Covitz, Peter A

2006-01-01

Background Robust, programmatically accessible biomedical information services that syntactically and semantically interoperate with other resources are challenging to construct. Such systems require the adoption of common information models, data representations and terminology standards as well as documented application programming interfaces (APIs). The National Cancer Institute (NCI) developed the cancer common ontologic representation environment (caCORE) to provide the infrastructure necessary to achieve interoperability across the systems it develops or sponsors. The caCORE Software Development Kit (SDK) was designed to provide developers both within and outside the NCI with the tools needed to construct such interoperable software systems. Results The caCORE SDK requires a Unified Modeling Language (UML) tool to begin the development workflow with the construction of a domain information model in the form of a UML Class Diagram. Models are annotated with concepts and definitions from a description logic terminology source using the Semantic Connector component. The annotated model is registered in the Cancer Data Standards Repository (caDSR) using the UML Loader component. System software is automatically generated using the Codegen component, which produces middleware that runs on an application server. The caCORE SDK was initially tested and validated using a seven-class UML model, and has been used to generate the caCORE production system, which includes models with dozens of classes. The deployed system supports access through object-oriented APIs with consistent syntax for retrieval of any type of data object across all classes in the original UML model. The caCORE SDK is currently being used by several development teams, including by participants in the cancer biomedical informatics grid (caBIG) program, to create compatible data services. caBIG compatibility standards are based upon caCORE resources, and thus the caCORE SDK has emerged as a key enabling technology for caBIG. Conclusion The caCORE SDK substantially lowers the barrier to implementing systems that are syntactically and semantically interoperable by providing workflow and automation tools that standardize and expedite modeling, development, and deployment. It has gained acceptance among developers in the caBIG program, and is expected to provide a common mechanism for creating data service nodes on the data grid that is under development. PMID:16398930

Interoperability and models for exchange of data between information systems in public administration

NASA Astrophysics Data System (ADS)

Glavev, Victor

2016-12-01

The types of software applications used by public administrations can be divided in three main groups: document management systems, record management systems and business process systems. Each one of them generates outputs that can be used as input data to the others. This is the main reason that requires exchange of data between these three groups and well defined models that should be followed. There are also many other reasons that will be discussed in the paper. Interoperability is a key aspect when those models are implemented, especially when there are different manufactures of systems in the area of software applications used by public authorities. The report includes examples of implementation of models for exchange of data between software systems deployed in one of the biggest administration in Bulgaria.

Harmonizing clinical terminologies: driving interoperability in healthcare.

PubMed

Hamm, Russell A; Knoop, Sarah E; Schwarz, Peter; Block, Aaron D; Davis, Warren L

2007-01-01

Internationally, there are countless initiatives to build National Healthcare Information Networks (NHIN) that electronically interconnect healthcare organizations by enhancing and integrating current information technology (IT) capabilities. The realization of such NHINs will enable the simple and immediate exchange of appropriate and vital clinical data among participating organizations. In order for institutions to accurately and automatically exchange information, the electronic clinical documents must make use of established clinical codes, such as those of SNOMED-CT, LOINC and ICD-9 CM. However, there does not exist one universally accepted coding scheme that encapsulates all pertinent clinical information for the purposes of patient care, clinical research and population heatlh reporting. In this paper, we propose a combination of methods and standards that target the harmonization of clinical terminologies and encourage sustainable, interoperable infrastructure for healthcare.

COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

NASA Technical Reports Server (NTRS)

Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

2000-01-01

The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

Reuse and Interoperability of Avionics for Space Systems

NASA Technical Reports Server (NTRS)

Hodson, Robert F.

2007-01-01

The space environment presents unique challenges for avionics. Launch survivability, thermal management, radiation protection, and other factors are important for successful space designs. Many existing avionics designs use custom hardware and software to meet the requirements of space systems. Although some space vendors have moved more towards a standard product line approach to avionics, the space industry still lacks similar standards and common practices for avionics development. This lack of commonality manifests itself in limited reuse and a lack of interoperability. To address NASA s need for interoperable avionics that facilitate reuse, several hardware and software approaches are discussed. Experiences with existing space boards and the application of terrestrial standards is outlined. Enhancements and extensions to these standards are considered. A modular stack-based approach to space avionics is presented. Software and reconfigurable logic cores are considered for extending interoperability and reuse. Finally, some of the issues associated with the design of reusable interoperable avionics are discussed.

Standard Health Level Seven for Odontological Digital Imaging

PubMed Central

Abril-Gonzalez, Mauricio; Portilla, Fernando A.

2017-01-01

Abstract Background: A guide for the implementation of dental digital imaging reports was developed and validated through the International Standard of Health Informatics–Health Level Seven (HL7), achieving interoperability with an electronic system that keeps dental records. Introduction: Digital imaging benefits patients, who can view previous close-ups of dental examinations; providers, because of greater efficiency in managing information; and insurers, because of improved accessibility, patient monitoring, and more efficient cost management. Finally, imaging is beneficial for the dentist who can be more agile in the diagnosis and treatment of patients using this tool. Materials and Methods: The guide was developed under the parameters of an HL7 standard. It was necessary to create a group of dentists and three experts in information and communication technologies from different institutions. Discussion: Diagnostic images scanned with conventional radiology or from a radiovisiograph can be converted to Digital Imaging and Communications in Medicine (DICOM) format, while also retaining patient information. The guide shows how the information of the health record of the patient and the information of the dental image could be standardized in a Clinical Dental Record document using international informatics standard like HL7-V3-CDA document (dental document Level 2). Since it is an informatics standardized document, it could be sent, stored, or displayed using different devices—personal computers or mobile devices—independent of the platform used. Conclusions: Interoperability using dental images and dental record systems reduces adverse events, increases security for the patient, and makes more efficient use of resources. This article makes a contribution to the field of telemedicine in dental informatics. In addition to that, the results could be a reference for projects of electronic medical records when the dental documents are part of them. PMID:27248059

Standard Health Level Seven for Odontological Digital Imaging.

PubMed

Abril-Gonzalez, Mauricio; Portilla, Fernando A; Jaramillo-Mejia, Marta C

2017-01-01

A guide for the implementation of dental digital imaging reports was developed and validated through the International Standard of Health Informatics-Health Level Seven (HL7), achieving interoperability with an electronic system that keeps dental records. Digital imaging benefits patients, who can view previous close-ups of dental examinations; providers, because of greater efficiency in managing information; and insurers, because of improved accessibility, patient monitoring, and more efficient cost management. Finally, imaging is beneficial for the dentist who can be more agile in the diagnosis and treatment of patients using this tool. The guide was developed under the parameters of an HL7 standard. It was necessary to create a group of dentists and three experts in information and communication technologies from different institutions. Diagnostic images scanned with conventional radiology or from a radiovisiograph can be converted to Digital Imaging and Communications in Medicine (DICOM) format, while also retaining patient information. The guide shows how the information of the health record of the patient and the information of the dental image could be standardized in a Clinical Dental Record document using international informatics standard like HL7-V3-CDA document (dental document Level 2). Since it is an informatics standardized document, it could be sent, stored, or displayed using different devices-personal computers or mobile devices-independent of the platform used. Interoperability using dental images and dental record systems reduces adverse events, increases security for the patient, and makes more efficient use of resources. This article makes a contribution to the field of telemedicine in dental informatics. In addition to that, the results could be a reference for projects of electronic medical records when the dental documents are part of them.

Smart Grid Interoperability Maturity Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Widergren, Steven E.; Levinson, Alex; Mater, J.

2010-04-28

The integration of automation associated with electricity resources (including transmission and distribution automation and demand-side resources operated by end-users) is key to supporting greater efficiencies and incorporating variable renewable resources and electric vehicles into the power system. The integration problems faced by this community are analogous to those faced in the health industry, emergency services, and other complex communities with many stakeholders. To highlight this issue and encourage communication and the development of a smart grid interoperability community, the GridWise Architecture Council (GWAC) created an Interoperability Context-Setting Framework. This "conceptual model" has been helpful to explain the importance of organizationalmore » alignment in addition to technical and informational interface specifications for "smart grid" devices and systems. As a next step to building a community sensitive to interoperability, the GWAC is investigating an interoperability maturity model (IMM) based on work done by others to address similar circumstances. The objective is to create a tool or set of tools that encourages a culture of interoperability in this emerging community. The tools would measure status and progress, analyze gaps, and prioritize efforts to improve the situation.« less

THE EARTH SYSTEM PREDICTION SUITE: Toward a Coordinated U.S. Modeling Capability

PubMed Central

Theurich, Gerhard; DeLuca, C.; Campbell, T.; Liu, F.; Saint, K.; Vertenstein, M.; Chen, J.; Oehmke, R.; Doyle, J.; Whitcomb, T.; Wallcraft, A.; Iredell, M.; Black, T.; da Silva, AM; Clune, T.; Ferraro, R.; Li, P.; Kelley, M.; Aleinov, I.; Balaji, V.; Zadeh, N.; Jacob, R.; Kirtman, B.; Giraldo, F.; McCarren, D.; Sandgathe, S.; Peckham, S.; Dunlap, R.

2017-01-01

The Earth System Prediction Suite (ESPS) is a collection of flagship U.S. weather and climate models and model components that are being instrumented to conform to interoperability conventions, documented to follow metadata standards, and made available either under open source terms or to credentialed users. The ESPS represents a culmination of efforts to create a common Earth system model architecture, and the advent of increasingly coordinated model development activities in the U.S. ESPS component interfaces are based on the Earth System Modeling Framework (ESMF), community-developed software for building and coupling models, and the National Unified Operational Prediction Capability (NUOPC) Layer, a set of ESMF-based component templates and interoperability conventions. This shared infrastructure simplifies the process of model coupling by guaranteeing that components conform to a set of technical and semantic behaviors. The ESPS encourages distributed, multi-agency development of coupled modeling systems, controlled experimentation and testing, and exploration of novel model configurations, such as those motivated by research involving managed and interactive ensembles. ESPS codes include the Navy Global Environmental Model (NavGEM), HYbrid Coordinate Ocean Model (HYCOM), and Coupled Ocean Atmosphere Mesoscale Prediction System (COAMPS®); the NOAA Environmental Modeling System (NEMS) and the Modular Ocean Model (MOM); the Community Earth System Model (CESM); and the NASA ModelE climate model and GEOS-5 atmospheric general circulation model. PMID:29568125

Electronic Health Record Application Support Service Enablers.

PubMed

Neofytou, M S; Neokleous, K; Aristodemou, A; Constantinou, I; Antoniou, Z; Schiza, E C; Pattichis, C S; Schizas, C N

2015-08-01

There is a huge need for open source software solutions in the healthcare domain, given the flexibility, interoperability and resource savings characteristics they offer. In this context, this paper presents the development of three open source libraries - Specific Enablers (SEs) for eHealth applications that were developed under the European project titled "Future Internet Social and Technological Alignment Research" (FI-STAR) funded under the "Future Internet Public Private Partnership" (FI-PPP) program. The three SEs developed under the Electronic Health Record Application Support Service Enablers (EHR-EN) correspond to: a) an Electronic Health Record enabler (EHR SE), b) a patient summary enabler based on the EU project "European patient Summary Open Source services" (epSOS SE) supporting patient mobility and the offering of interoperable services, and c) a Picture Archiving and Communications System (PACS) enabler (PACS SE) based on the dcm4che open source system for the support of medical imaging functionality. The EHR SE follows the HL7 Clinical Document Architecture (CDA) V2.0 and supports the Integrating the Healthcare Enterprise (IHE) profiles (recently awarded in Connectathon 2015). These three FI-STAR platform enablers are designed to facilitate the deployment of innovative applications and value added services in the health care sector. They can be downloaded from the FI-STAR cataloque website. Work in progress focuses in the validation and evaluation scenarios for the proving and demonstration of the usability, applicability and adaptability of the proposed enablers.

THE EARTH SYSTEM PREDICTION SUITE: Toward a Coordinated U.S. Modeling Capability.

PubMed

Theurich, Gerhard; DeLuca, C; Campbell, T; Liu, F; Saint, K; Vertenstein, M; Chen, J; Oehmke, R; Doyle, J; Whitcomb, T; Wallcraft, A; Iredell, M; Black, T; da Silva, A M; Clune, T; Ferraro, R; Li, P; Kelley, M; Aleinov, I; Balaji, V; Zadeh, N; Jacob, R; Kirtman, B; Giraldo, F; McCarren, D; Sandgathe, S; Peckham, S; Dunlap, R

2016-07-01

The Earth System Prediction Suite (ESPS) is a collection of flagship U.S. weather and climate models and model components that are being instrumented to conform to interoperability conventions, documented to follow metadata standards, and made available either under open source terms or to credentialed users. The ESPS represents a culmination of efforts to create a common Earth system model architecture, and the advent of increasingly coordinated model development activities in the U.S. ESPS component interfaces are based on the Earth System Modeling Framework (ESMF), community-developed software for building and coupling models, and the National Unified Operational Prediction Capability (NUOPC) Layer, a set of ESMF-based component templates and interoperability conventions. This shared infrastructure simplifies the process of model coupling by guaranteeing that components conform to a set of technical and semantic behaviors. The ESPS encourages distributed, multi-agency development of coupled modeling systems, controlled experimentation and testing, and exploration of novel model configurations, such as those motivated by research involving managed and interactive ensembles. ESPS codes include the Navy Global Environmental Model (NavGEM), HYbrid Coordinate Ocean Model (HYCOM), and Coupled Ocean Atmosphere Mesoscale Prediction System (COAMPS ® ); the NOAA Environmental Modeling System (NEMS) and the Modular Ocean Model (MOM); the Community Earth System Model (CESM); and the NASA ModelE climate model and GEOS-5 atmospheric general circulation model.

The Earth System Prediction Suite: Toward a Coordinated U.S. Modeling Capability

NASA Technical Reports Server (NTRS)

Theurich, Gerhard; DeLuca, C.; Campbell, T.; Liu, F.; Saint, K.; Vertenstein, M.; Chen, J.; Oehmke, R.; Doyle, J.; Whitcomb, T.;

Clinical data integration model. Core interoperability ontology for research using primary care data.

PubMed

Ethier, J-F; Curcin, V; Barton, A; McGilchrist, M M; Bastiaens, H; Andreasson, A; Rossiter, J; Zhao, L; Arvanitis, T N; Taweel, A; Delaney, B C; Burgun, A

2015-01-01

This article is part of the Focus Theme of METHODS of Information in Medicine on "Managing Interoperability and Complexity in Health Systems". Primary care data is the single richest source of routine health care data. However its use, both in research and clinical work, often requires data from multiple clinical sites, clinical trials databases and registries. Data integration and interoperability are therefore of utmost importance. TRANSFoRm's general approach relies on a unified interoperability framework, described in a previous paper. We developed a core ontology for an interoperability framework based on data mediation. This article presents how such an ontology, the Clinical Data Integration Model (CDIM), can be designed to support, in conjunction with appropriate terminologies, biomedical data federation within TRANSFoRm, an EU FP7 project that aims to develop the digital infrastructure for a learning healthcare system in European Primary Care. TRANSFoRm utilizes a unified structural / terminological interoperability framework, based on the local-as-view mediation paradigm. Such an approach mandates the global information model to describe the domain of interest independently of the data sources to be explored. Following a requirement analysis process, no ontology focusing on primary care research was identified and, thus we designed a realist ontology based on Basic Formal Ontology to support our framework in collaboration with various terminologies used in primary care. The resulting ontology has 549 classes and 82 object properties and is used to support data integration for TRANSFoRm's use cases. Concepts identified by researchers were successfully expressed in queries using CDIM and pertinent terminologies. As an example, we illustrate how, in TRANSFoRm, the Query Formulation Workbench can capture eligibility criteria in a computable representation, which is based on CDIM. A unified mediation approach to semantic interoperability provides a flexible and extensible framework for all types of interaction between health record systems and research systems. CDIM, as core ontology of such an approach, enables simplicity and consistency of design across the heterogeneous software landscape and can support the specific needs of EHR-driven phenotyping research using primary care data.

Application-Level Interoperability Across Grids and Clouds

NASA Astrophysics Data System (ADS)

Jha, Shantenu; Luckow, Andre; Merzky, Andre; Erdely, Miklos; Sehgal, Saurabh

Application-level interoperability is defined as the ability of an application to utilize multiple distributed heterogeneous resources. Such interoperability is becoming increasingly important with increasing volumes of data, multiple sources of data as well as resource types. The primary aim of this chapter is to understand different ways in which application-level interoperability can be provided across distributed infrastructure. We achieve this by (i) using the canonical wordcount application, based on an enhanced version of MapReduce that scales-out across clusters, clouds, and HPC resources, (ii) establishing how SAGA enables the execution of wordcount application using MapReduce and other programming models such as Sphere concurrently, and (iii) demonstrating the scale-out of ensemble-based biomolecular simulations across multiple resources. We show user-level control of the relative placement of compute and data and also provide simple performance measures and analysis of SAGA-MapReduce when using multiple, different, heterogeneous infrastructures concurrently for the same problem instance. Finally, we discuss Azure and some of the system-level abstractions that it provides and show how it is used to support ensemble-based biomolecular simulations.

NSF-Sponsored Biological and Chemical Oceanography Data Management Office

NASA Astrophysics Data System (ADS)

Allison, M. D.; Chandler, C. L.; Copley, N.; Galvarino, C.; Gegg, S. R.; Glover, D. M.; Groman, R. C.; Wiebe, P. H.; Work, T. T.; Biological; Chemical Oceanography Data Management Office

2010-12-01

Ocean biogeochemistry and marine ecosystem research projects are inherently interdisciplinary and benefit from improved access to well-documented data. Improved data sharing practices are important to the continued exploration of research themes that are a central focus of the ocean science community and are essential to interdisciplinary and international collaborations that address complex, global research themes. In 2006, the National Science Foundation Division of Ocean Sciences (NSF OCE) funded the Biological and Chemical Oceanography Data Management Office (BCO-DMO) to serve the data management requirements of scientific investigators funded by the National Science Foundation’s Biological and Chemical Oceanography Sections. BCO-DMO staff members work with investigators to manage marine biogeochemical, ecological, and oceanographic data and information developed in the course of scientific research. These valuable data sets are documented, stored, disseminated, and protected over short and intermediate time frames. One of the goals of the BCO-DMO is to facilitate regional, national, and international data and information exchange through improved data discovery, access, display, downloading, and interoperability. In May 2010, NSF released a statement to the effect that in October 2010, it is planning to require that all proposals include a data management plan in the form of a two-page supplementary document. The data management plan would be an element of the merit review process. NSF has long been committed to making data from NSF-funded research publicly available and the new policy will strengthen this commitment. BCO-DMO is poised to assist in creating the data management plans and in ultimately serving the data and information resulting from NSF OCE funded research. We will present an overview of the data management system capabilities including: geospatial and text-based data discovery and access systems; recent enhancements to data search tools; data export and download utilities; and strategic use of controlled vocabularies to facilitate data integration and improve interoperability.

MRML: an extensible communication protocol for interoperability and benchmarking of multimedia information retrieval systems

NASA Astrophysics Data System (ADS)

Mueller, Wolfgang; Mueller, Henning; Marchand-Maillet, Stephane; Pun, Thierry; Squire, David M.; Pecenovic, Zoran; Giess, Christoph; de Vries, Arjen P.

2000-10-01

While in the area of relational databases interoperability is ensured by common communication protocols (e.g. ODBC/JDBC using SQL), Content Based Image Retrieval Systems (CBIRS) and other multimedia retrieval systems are lacking both a common query language and a common communication protocol. Besides its obvious short term convenience, interoperability of systems is crucial for the exchange and analysis of user data. In this paper, we present and describe an extensible XML-based query markup language, called MRML (Multimedia Retrieval markup Language). MRML is primarily designed so as to ensure interoperability between different content-based multimedia retrieval systems. Further, MRML allows researchers to preserve their freedom in extending their system as needed. MRML encapsulates multimedia queries in a way that enable multimedia (MM) query languages, MM content descriptions, MM query engines, and MM user interfaces to grow independently from each other, reaching a maximum of interoperability while ensuring a maximum of freedom for the developer. For benefitting from this, only a few simple design principles have to be respected when extending MRML for one's fprivate needs. The design of extensions withing the MRML framework will be described in detail in the paper. MRML has been implemented and tested for the CBIRS Viper, using the user interface Snake Charmer. Both are part of the GNU project and can be downloaded at our site.

Test Protocols for Advanced Inverter Interoperability Functions - Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not now required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

Using ontological inference and hierarchical matchmaking to overcome semantic heterogeneity in remote sensing-based biodiversity monitoring

NASA Astrophysics Data System (ADS)

Nieland, Simon; Kleinschmit, Birgit; Förster, Michael

2015-05-01

Ontology-based applications hold promise in improving spatial data interoperability. In this work we use remote sensing-based biodiversity information and apply semantic formalisation and ontological inference to show improvements in data interoperability/comparability. The proposed methodology includes an observation-based, "bottom-up" engineering approach for remote sensing applications and gives a practical example of semantic mediation of geospatial products. We apply the methodology to three different nomenclatures used for remote sensing-based classification of two heathland nature conservation areas in Belgium and Germany. We analysed sensor nomenclatures with respect to their semantic formalisation and their bio-geographical differences. The results indicate that a hierarchical and transparent nomenclature is far more important for transferability than the sensor or study area. The inclusion of additional information, not necessarily belonging to a vegetation class description, is a key factor for the future success of using semantics for interoperability in remote sensing.

Mapping the route to medication therapy management documentation and billing standardization and interoperabilility within the health care system: meeting proceedings.

PubMed

Millonig, Marsha K

2009-01-01

To convene a diverse group of stakeholders to discuss medication therapy management (MTM) documentation and billing standardization and its interoperability within the health care system. More than 70 stakeholders from pharmacy, health information systems, insurers/payers, quality, and standard-setting organizations met on October 7-8, 2008, in Bethesda, MD. The American Pharmacists Association (APhA) organized the invitational conference to facilitate discussion on strategic directions for meeting current market need for MTM documentation and billing interoperability and future market needs for MTM integration into electronic health records (EHRs). APhA recently adopted policy that specifically addresses technology barriers and encourages the use and development of standardized systems for the documentation and billing of MTM services. Day 1 of the conference featured six foundational presentations on health information technology (HIT) trends, perspectives on MTM from the profession and the Centers for Medicare & Medicaid Services, health care quality and medication-related outcome measures, integrating MTM workflow in EHRs, and the current state of MTM operalization in practice. After hearing presentations on day 1 and having the opportunity to pose questions to each speaker, conference participants were divided into three breakout groups on day 2. Each group met three times for 60 minutes each and discussed five questions from the perspective of a patient, provider, or payer. Three facilitators met with each of the groups and led discussion from one perspective (i.e., patient, provider, payer). Participants then reconvened as a complete group to participate in a discussion on next steps. HIT is expected to assist in delivering safe, effective, efficient, coordinated care as health professionals strive to improve the quality of care and outcomes for individual patients. The pharmacy profession is actively contributing to quality patient care through MTM services focused on identifying and preventing medication-related problems, improving medication use, and optimizing individual therapeutic outcomes. As MTM programs continue to expand within the health care system, one important limiting factor is the lack of standardization for documentation and billing of MTM services. This lack of interoperability between technology systems, software, and system platforms is presenting as a barrier to MTM service delivery for patients. APhA convened this invitational conference to identify strategic directions to address MTM documentation and billing standardization and interoperability. Participants viewed the meeting as highly successful in bringing together a unique, wide-ranging set of stakeholders, including the government, regulators, standards organizations, other health professions, technology firms, professional organizations, and practitioners, to share perspectives. They strongly encouraged the Association to continue this unique stakeholder dialogue. Participants provided a number of next-step suggestions for APhA to consider because of the event. Participants noted the pharmacy profession's success in building information technology systems for product transactions with systematic, organized, methodical thinking and the need to apply this success to patient services. A unique opportunity exists for the profession to influence and lead the HIT community in creating a workable health technology solution for MTM services. Reaching consensus on minimum data sets for each functional area--clinical, billing, quality improvement--would be a very important short-term gain. Further, participants said it was imperative for pharmacists and the pharmacy community at large to become actively engaged in HIT standards development efforts.

HTML5 microdata as a semantic container for medical information exchange.

PubMed

Kimura, Eizen; Kobayashi, Shinji; Ishihara, Ken

2014-01-01

Achieving interoperability between clinical electronic medical records (EMR) systems and cloud computing systems is challenging because of the lack of a universal reference method as a standard for information exchange with a secure connection. Here we describe an information exchange scheme using HTML5 microdata, where the standard semantic container is an HTML document. We embed HL7 messages describing laboratory test results in the microdata. We also annotate items in the clinical research report with the microdata. We mapped the laboratory test result data into the clinical research report using an HL7 selector specified in the microdata. This scheme can provide secure cooperation between the cloud-based service and the EMR system.

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

NASA Astrophysics Data System (ADS)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Understanding the CCA Standard Through Decaf

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumfert, G

2003-04-17

This document is a tutorial on the CCA Standard as realized through the Decaf implementation. Decaf does not equal the CCA standard much in the same way that Microsoft Visual C++ is not ANSI/ISO C++. This document was created because the CCA standard is evolving and still too fluid to nail down in a tutorial document. Because of its fluidity, and that it represents a hotbed of research and development, beginners can only start learning CCA by choosing one of the frameworks (warts and all). Decaf has just enough functionality to be a useful tool for beginners in the CCAmore » to get started on. Though it lacks many features of the bigger CCA frameworks (CCAFE [3], XCAT [10], and SciRUN [8]) where the heavy-duty research is still going on, it is the first CCA framework that is underpinned by Babel, which provides its language interoperability features. This document can also serve the dual-purpose of providing a reasonable-sized example of building an application using Babel. The entire source for Decaf is included in the examples/subdirectory of the Babel code distribution. This manual assumes the reader is a programmer who has a conceptual understanding of the Babel Language Interoperability Tool. They should be proficient in two or more of the following languages: Fortran77, C, C++, Java, or Python. Furthermore, this manual assumes the reader is familiar with the SPMD{sup 2} programming model that pervades the scientific computing community. Knowledge of and experience with MPI programming is helpful, but not strictly required.« less

ARGOS Policy Brief on Semantic Interoperability

PubMed Central

KALRA, Dipak; MUSEN, Mark; SMITH, Barry; CEUSTERS, Werner

2016-01-01

Semantic interoperability is one of the priority themes of the ARGOS Trans-Atlantic Observatory. This topic represents a globally recognised challenge that must be addressed if electronic health records are to be shared among heterogeneous systems, and the information in them exploited to the maximum benefit of patients, professionals, health services, research, and industry. Progress in this multi-faceted challenge has been piecemeal, and valuable lessons have been learned, and approaches discovered, in Europe and in the US that can be shared and combined. Experts from both continents have met at three ARGOS workshops during 2010 and 2011 to share understanding of these issues and how they might be tackled collectively from both sides of the Atlantic. This policy brief summarises the problems and the reasons why they are important to tackle, and also why they are so difficult. It outlines the major areas of semantic innovation that exist and that are available to help address this challenge. It proposes a series of next steps that need to be championed on both sides of the Atlantic if further progress is to be made in sharing and analysing electronic health records meaningfully. Semantic interoperability requires the use of standards, not only for EHR data to be transferred and structurally mapped into a receiving repository, but also for the clinical content of the EHR to be interpreted in conformity with the original meanings intended by its authors. Wide-scale engagement with professional bodies, globally, is needed to develop these clinical information standards. Accurate and complete clinical documentation, faithful to the patient’s situation, and interoperability between systems, require widespread and dependable access to published and maintained collections of coherent and quality-assured semantic resources, including models such as archetypes and templates that would (1) provide clinical context, (2) be mapped to interoperability standards for EHR data, (3) be linked to well specified multi-lingual terminology value sets, and (4) be derived from high quality ontologies. There is need to gain greater experience in how semantic resources should be defined, validated, and disseminated, how users (who increasingly will include patients) should be educated to improve the quality and consistency of EHR documentation and to make full use of it. There are urgent needs to scale up the authorship, acceptance, and adoption of clinical information standards, to leverage and harmonise the islands of standardisation optimally, to assure the quality of the artefacts produced, and to organise end-to-end governance of the development and adoption of solutions. PMID:21893897

Interoperable and standard e-Health solution over Bluetooth.

PubMed

Martinez, I; Del Valle, P; Munoz, P; Trigo, J D; Escayola, J; Martínez-Espronceda, M; Muñoz, A; Serrano, L; Garcia, J

2010-01-01

The new paradigm of e-Health demands open sensors and middleware components that permit transparent integration and end-to-end interoperability of new personal health devices. The use of standards seems to be the internationally adopted way to solve these problems. This paper presents the implementation of an end-to-end standards-based e-Health solution. This includes ISO/IEEE11073 standard for the interoperability of the medical devices in the patient environment and EN13606 standard for the interoperable exchange of the Electronic Healthcare Record. The design strictly fulfills all the technical features of the most recent versions of both standards. The implemented prototype has been tested in a laboratory environment to demonstrate its feasibility for its further transfer to the healthcare system.

A Service Oriented Architecture Approach to Achieve Interoperability between Immunization Information Systems in Iran

PubMed Central

Hosseini, Masoud; Ahmadi, Maryam; Dixon, Brian E.

2014-01-01

Clinical decision support (CDS) systems can support vaccine forecasting and immunization reminders; however, immunization decision-making requires data from fragmented, independent systems. Interoperability and accurate data exchange between immunization information systems (IIS) is an essential factor to utilize Immunization CDS systems. Service oriented architecture (SOA) and Health Level 7 (HL7) are dominant standards for web-based exchange of clinical information. We implemented a system based on SOA and HL7 v3 to support immunization CDS in Iran. We evaluated system performance by exchanging 1500 immunization records for roughly 400 infants between two IISs. System turnaround time is less than a minute for synchronous operation calls and the retrieved immunization history of infants were always identical in different systems. CDS generated reports were accordant to immunization guidelines and the calculations for next visit times were accurate. Interoperability is rare or nonexistent between IIS. Since inter-state data exchange is rare in United States, this approach could be a good prototype to achieve interoperability of immunization information. PMID:25954452

A Service Oriented Architecture Approach to Achieve Interoperability between Immunization Information Systems in Iran.

PubMed

Hosseini, Masoud; Ahmadi, Maryam; Dixon, Brian E

2014-01-01

Clinical decision support (CDS) systems can support vaccine forecasting and immunization reminders; however, immunization decision-making requires data from fragmented, independent systems. Interoperability and accurate data exchange between immunization information systems (IIS) is an essential factor to utilize Immunization CDS systems. Service oriented architecture (SOA) and Health Level 7 (HL7) are dominant standards for web-based exchange of clinical information. We implemented a system based on SOA and HL7 v3 to support immunization CDS in Iran. We evaluated system performance by exchanging 1500 immunization records for roughly 400 infants between two IISs. System turnaround time is less than a minute for synchronous operation calls and the retrieved immunization history of infants were always identical in different systems. CDS generated reports were accordant to immunization guidelines and the calculations for next visit times were accurate. Interoperability is rare or nonexistent between IIS. Since inter-state data exchange is rare in United States, this approach could be a good prototype to achieve interoperability of immunization information.

Exploration of cloud computing late start LDRD #149630 : Raincoat. v. 2.1.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Echeverria, Victor T.; Metral, Michael David; Leger, Michelle A.

This report contains documentation from an interoperability study conducted under the Late Start LDRD 149630, Exploration of Cloud Computing. A small late-start LDRD from last year resulted in a study (Raincoat) on using Virtual Private Networks (VPNs) to enhance security in a hybrid cloud environment. Raincoat initially explored the use of OpenVPN on IPv4 and demonstrates that it is possible to secure the communication channel between two small 'test' clouds (a few nodes each) at New Mexico Tech and Sandia. We extended the Raincoat study to add IPSec support via Vyatta routers, to interface with a public cloud (Amazon Elasticmore » Compute Cloud (EC2)), and to be significantly more scalable than the previous iteration. The study contributed to our understanding of interoperability in a hybrid cloud.« less

Interoperable Archetypes With a Three Folded Terminology Governance.

PubMed

Pederson, Rune; Ellingsen, Gunnar

2015-01-01

The use of openEHR archetypes increases the interoperability of clinical terminology, and in doing so improves upon the availability of clinical terminology for both primary and secondary purposes. Where clinical terminology is employed in the EPR system, research reports conflicting a results for the use of structuring and standardization as measurements of success. In order to elucidate this concept, this paper focuses on the effort to establish a national repository for openEHR based archetypes in Norway where clinical terminology could be included with benefit for interoperability three folded.

The Next Generation of Interoperability Agents in Healthcare

PubMed Central

Cardoso, Luciana; Marins, Fernando; Portela, Filipe; Santos, Manuel ; Abelha, António; Machado, José

2014-01-01

Interoperability in health information systems is increasingly a requirement rather than an option. Standards and technologies, such as multi-agent systems, have proven to be powerful tools in interoperability issues. In the last few years, the authors have worked on developing the Agency for Integration, Diffusion and Archive of Medical Information (AIDA), which is an intelligent, agent-based platform to ensure interoperability in healthcare units. It is increasingly important to ensure the high availability and reliability of systems. The functions provided by the systems that treat interoperability cannot fail. This paper shows the importance of monitoring and controlling intelligent agents as a tool to anticipate problems in health information systems. The interaction between humans and agents through an interface that allows the user to create new agents easily and to monitor their activities in real time is also an important feature, as health systems evolve by adopting more features and solving new problems. A module was installed in Centro Hospitalar do Porto, increasing the functionality and the overall usability of AIDA. PMID:24840351

The role of markup for enabling interoperability in health informatics.

PubMed

McKeever, Steve; Johnson, David

2015-01-01

Interoperability is the faculty of making information systems work together. In this paper we will distinguish a number of different forms that interoperability can take and show how they are realized on a variety of physiological and health care use cases. The last 15 years has seen the rise of very cheap digital storage both on and off site. With the advent of the Internet of Things people's expectations are for greater interconnectivity and seamless interoperability. The potential impact these technologies have on healthcare are dramatic: from improved diagnoses through immediate access to a patient's electronic health record, to in silico modeling of organs and early stage drug trials, to predictive medicine based on top-down modeling of disease progression and treatment. We will begin by looking at the underlying technology, classify the various kinds of interoperability that exist in the field, and discuss how they are realized. We conclude with a discussion on future possibilities that big data and further standardizations will enable.

An Access Control and Trust Management Framework for Loosely-Coupled Multidomain Environments

ERIC Educational Resources Information Center

Zhang, Yue

2010-01-01

Multidomain environments where multiple organizations interoperate with each other are becoming a reality as can be seen in emerging Internet-based enterprise applications. Access control to ensure secure interoperation in such an environment is a crucial challenge. A multidomain environment can be categorized as "tightly-coupled" and…

RuleML-Based Learning Object Interoperability on the Semantic Web

ERIC Educational Resources Information Center

Biletskiy, Yevgen; Boley, Harold; Ranganathan, Girish R.

2008-01-01

Purpose: The present paper aims to describe an approach for building the Semantic Web rules for interoperation between heterogeneous learning objects, namely course outlines from different universities, and one of the rule uses: identifying (in)compatibilities between course descriptions. Design/methodology/approach: As proof of concept, a rule…

Providing interoperability of eHealth communities through peer-to-peer networks.

PubMed

Kilic, Ozgur; Dogac, Asuman; Eichelberg, Marco

2010-05-01

Providing an interoperability infrastructure for Electronic Healthcare Records (EHRs) is on the agenda of many national and regional eHealth initiatives. Two important integration profiles have been specified for this purpose, namely, the "Integrating the Healthcare Enterprise (IHE) Cross-enterprise Document Sharing (XDS)" and the "IHE Cross Community Access (XCA)." IHE XDS describes how to share EHRs in a community of healthcare enterprises and IHE XCA describes how EHRs are shared across communities. However, the current version of the IHE XCA integration profile does not address some of the important challenges of cross-community exchange environments. The first challenge is scalability. If every community that joins the network needs to connect to every other community, i.e., a pure peer-to-peer network, this solution will not scale. Furthermore, each community may use a different coding vocabulary for the same metadata attribute, in which case, the target community cannot interpret the query involving such an attribute. Yet another important challenge is that each community may (and typically will) have a different patient identifier domain. Querying for the patient identifiers in the target community using patient demographic data may create patient privacy concerns. In this paper, we address each of these challenges and show how they can be handled effectively in a superpeer-based peer-to-peer architecture.

Transforming Dermatologic Imaging for the Digital Era: Metadata and Standards.

PubMed

Caffery, Liam J; Clunie, David; Curiel-Lewandrowski, Clara; Malvehy, Josep; Soyer, H Peter; Halpern, Allan C

2018-01-17

Imaging is increasingly being used in dermatology for documentation, diagnosis, and management of cutaneous disease. The lack of standards for dermatologic imaging is an impediment to clinical uptake. Standardization can occur in image acquisition, terminology, interoperability, and metadata. This paper presents the International Skin Imaging Collaboration position on standardization of metadata for dermatologic imaging. Metadata is essential to ensure that dermatologic images are properly managed and interpreted. There are two standards-based approaches to recording and storing metadata in dermatologic imaging. The first uses standard consumer image file formats, and the second is the file format and metadata model developed for the Digital Imaging and Communication in Medicine (DICOM) standard. DICOM would appear to provide an advantage over using consumer image file formats for metadata as it includes all the patient, study, and technical metadata necessary to use images clinically. Whereas, consumer image file formats only include technical metadata and need to be used in conjunction with another actor-for example, an electronic medical record-to supply the patient and study metadata. The use of DICOM may have some ancillary benefits in dermatologic imaging including leveraging DICOM network and workflow services, interoperability of images and metadata, leveraging existing enterprise imaging infrastructure, greater patient safety, and better compliance to legislative requirements for image retention.

The Human Phenotype Ontology project: linking molecular biology and disease through phenotype data

PubMed Central

Köhler, Sebastian; Doelken, Sandra C.; Mungall, Christopher J.; Bauer, Sebastian; Firth, Helen V.; Bailleul-Forestier, Isabelle; Black, Graeme C. M.; Brown, Danielle L.; Brudno, Michael; Campbell, Jennifer; FitzPatrick, David R.; Eppig, Janan T.; Jackson, Andrew P.; Freson, Kathleen; Girdea, Marta; Helbig, Ingo; Hurst, Jane A.; Jähn, Johanna; Jackson, Laird G.; Kelly, Anne M.; Ledbetter, David H.; Mansour, Sahar; Martin, Christa L.; Moss, Celia; Mumford, Andrew; Ouwehand, Willem H.; Park, Soo-Mi; Riggs, Erin Rooney; Scott, Richard H.; Sisodiya, Sanjay; Vooren, Steven Van; Wapner, Ronald J.; Wilkie, Andrew O. M.; Wright, Caroline F.; Vulto-van Silfhout, Anneke T.; de Leeuw, Nicole; de Vries, Bert B. A.; Washingthon, Nicole L.; Smith, Cynthia L.; Westerfield, Monte; Schofield, Paul; Ruef, Barbara J.; Gkoutos, Georgios V.; Haendel, Melissa; Smedley, Damian; Lewis, Suzanna E.; Robinson, Peter N.

2014-01-01

The Human Phenotype Ontology (HPO) project, available at http://www.human-phenotype-ontology.org, provides a structured, comprehensive and well-defined set of 10,088 classes (terms) describing human phenotypic abnormalities and 13,326 subclass relations between the HPO classes. In addition we have developed logical definitions for 46% of all HPO classes using terms from ontologies for anatomy, cell types, function, embryology, pathology and other domains. This allows interoperability with several resources, especially those containing phenotype information on model organisms such as mouse and zebrafish. Here we describe the updated HPO database, which provides annotations of 7,278 human hereditary syndromes listed in OMIM, Orphanet and DECIPHER to classes of the HPO. Various meta-attributes such as frequency, references and negations are associated with each annotation. Several large-scale projects worldwide utilize the HPO for describing phenotype information in their datasets. We have therefore generated equivalence mappings to other phenotype vocabularies such as LDDB, Orphanet, MedDRA, UMLS and phenoDB, allowing integration of existing datasets and interoperability with multiple biomedical resources. We have created various ways to access the HPO database content using flat files, a MySQL database, and Web-based tools. All data and documentation on the HPO project can be found online. PMID:24217912

Case Studies of Ecological Integrative Information Systems: The Luquillo and Sevilleta Information Management Systems

NASA Astrophysics Data System (ADS)

San Gil, Inigo; White, Marshall; Melendez, Eda; Vanderbilt, Kristin

The thirty-year-old United States Long Term Ecological Research Network has developed extensive metadata to document their scientific data. Standard and interoperable metadata is a core component of the data-driven analytical solutions developed by this research network Content management systems offer an affordable solution for rapid deployment of metadata centered information management systems. We developed a customized integrative metadata management system based on the Drupal content management system technology. Building on knowledge and experience with the Sevilleta and Luquillo Long Term Ecological Research sites, we successfully deployed the first two medium-scale customized prototypes. In this paper, we describe the vision behind our Drupal based information management instances, and list the features offered through these Drupal based systems. We also outline the plans to expand the information services offered through these metadata centered management systems. We will conclude with the growing list of participants deploying similar instances.

Executing Medical Guidelines on the Web: Towards Next Generation Healthcare

NASA Astrophysics Data System (ADS)

Argüello, M.; Des, J.; Fernandez-Prieto, M. J.; Perez, R.; Paniagua, H.

There is still a lack of full integration between current Electronic Health Records (EHRs) and medical guidelines that encapsulate evidence-based medicine. Thus, general practitioners (GPs) and specialised physicians still have to read document-based medical guidelines and decide among various options for managing common non-life-threatening conditions where the selection of the most appropriate therapeutic option for each individual patient can be a difficult task. This paper presents a simulation framework and computational test-bed, called V.A.F. Framework, for supporting simulations of clinical situations that boosted the integration between Health Level Seven (HL7) and Semantic Web technologies (OWL, SWRL, and OWL-S) to achieve content layer interoperability between online clinical cases and medical guidelines, and therefore, it proves that higher integration between EHRs and evidence-based medicine can be accomplished which could lead to a next generation of healthcare systems that provide more support to physicians and increase patients' safety.

A Problem-Solving Environment for Biological Network Informatics: Bio-Spice

DTIC Science & Technology

2007-06-01

user an environment to access software tools. The Dashboard is built upon the NetBeans Integrated Development Environment (IDE), an open source Java...based integration platform was demonstrated. During the subsequent six month development cycle, the first version of the NetBeans based Bio-SPICE...frameworks (OAA, NetBeans , and Systems Biology Workbench (SBW)[15]), it becomes possible for Bio-SPICE tools to truly interoperate. This interoperation

Secure, Autonomous, Intelligent Controller for Integrating Distributed Sensor Webs

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2007-01-01

This paper describes the infrastructure and protocols necessary to enable near-real-time commanding, access to space-based assets, and the secure interoperation between sensor webs owned and controlled by various entities. Select terrestrial and aeronautics-base sensor webs will be used to demonstrate time-critical interoperability between integrated, intelligent sensor webs both terrestrial and between terrestrial and space-based assets. For this work, a Secure, Autonomous, Intelligent Controller and knowledge generation unit is implemented using Virtual Mission Operation Center technology.

CytometryML: a data standard which has been designed to interface with other standards

NASA Astrophysics Data System (ADS)

Leif, Robert C.

2007-02-01

Because of the differences in the requirements, needs, and past histories including existing standards of the creating organizations, a single encompassing cytology-pathology standard will not, in the near future, replace the multiple existing or under development standards. Except for DICOM and FCS, these standardization efforts are all based on XML. CytometryML is a collection of XML schemas, which are based on the Digital Imaging and Communications in Medicine (DICOM) and Flow Cytometry Standard (FCS) datatypes. The CytometryML schemas contain attributes that link them to the DICOM standard and FCS. Interoperability with DICOM has been facilitated by, wherever reasonable, limiting the difference between CytometryML and the previous standards to syntax. In order to permit the Resource Description Framework, RDF, to reference the CytometryML datatypes, id attributes have been added to many CytometryML elements. The Laboratory Digital Imaging Project (LDIP) Data Exchange Specification and the Flowcyt standards development effort employ RDF syntax. Documentation from DICOM has been reused in CytometryML. The unity of analytical cytology was demonstrated by deriving a microscope type and a flow cytometer type from a generic cytometry instrument type. The feasibility of incorporating the Flowcyt gating schemas into CytometryML has been demonstrated. CytometryML is being extended to include many of the new DICOM Working Group 26 datatypes, which describe patients, specimens, and analytes. In situations where multiple standards are being created, interoperability can be facilitated by employing datatypes based on a common set of semantics and building in links to standards that employ different syntax.

Cross-domain Collaborative Research and People Interoperability: Beyond Knowledge Representation Frameworks

NASA Astrophysics Data System (ADS)

Fox, P. A.; Diviacco, P.; Busato, A.

2016-12-01

Geo-scientific research collaboration commonly faces of complex systems where multiple skills and competences are needed at the same time. Efficacy of such collaboration among researchers then becomes of paramount importance. Multidisciplinary studies draw from domains that are far from each other. Researchers also need to understand: how to extract what data they need and eventually produce something that can be used by others. The management of information and knowledge in this perspective is non-trivial. Interoperability is frequently sought in computer-to-computer environements, so-as to overcome mismatches in vocabulary, data formats, coordinate reference system and so on. Successful researcher collaboration also relies on interoperability of the people! Smaller, synchronous and face-to-face settings for researchers are knownn to enhance people interoperability. However changing settings; either geographically; temporally; or with increasing the team size, diversity, and expertise requires people-computer-people-computer (...) interoperability. To date, knowledge representation framework have been proposed but not proven as necessary and sufficient to achieve multi-way interoperability. In this contribution, we address epistemology and sociology of science advocating for a fluid perspective where science is mostly a social construct, conditioned by cognitive issues; especially cognitive bias. Bias cannot be obliterated. On the contrary it must be carefully taken into consideration. Information-centric interfaces built from different perspectives and ways of thinking by actors with different point of views, approaches and aims, are proposed as a means for enhancing people interoperability in computer-based settings. The contribution will provide details on the approach of augmenting and interfacing to knowledge representation frameworks to the cognitive-conceptual frameworks for people that are needed to meet and exceed collaborative research goals in the 21st century. A web based collaborative portal has been developed that integrates both approaches and will be presented. Reports will be given on initial tests that have encouraging results.

Ambulatory measurement of the scapulohumeral rhythm: intra- and inter-operator agreement of a protocol based on inertial and magnetic sensors.

PubMed

Parel, I; Cutti, A G; Fiumana, G; Porcellini, G; Verni, G; Accardo, A P

2012-04-01

To measure the scapulohumeral rhythm (SHR) in outpatient settings, the motion analysis protocol named ISEO (INAIL Shoulder and Elbow Outpatient protocol) was developed, based on inertial and magnetic sensors. To complete the sensor-to-segment calibration, ISEO requires the involvement of an operator for sensor placement and for positioning the patient's arm in a predefined posture. Since this can affect the measure, this study aimed at quantifying ISEO intra- and inter-operator agreement. Forty subjects were considered, together with two operators, A and B. Three measurement sessions were completed for each subject: two by A and one by B. In each session, the humerus and scapula rotations were measured during sagittal and scapular plane elevation movements. ISEO intra- and inter-operator agreement were assessed by computing, between sessions, the: (1) similarity of the scapulohumeral patterns through the Coefficient of Multiple Correlation (CMC(2)), both considering and excluding the difference of the initial value of the scapula rotations between two sessions (inter-session offset); (2) 95% Smallest Detectable Difference (SDD(95)) in scapula range of motion. Results for CMC(2) showed that the intra- and inter-operator agreement is acceptable (median≥0.85, lower-whisker ≥ 0.75) for most of the scapula rotations, independently from the movement and the inter-session offset. The only exception is the agreement for scapula protraction-retraction and for scapula medio-lateral rotation during abduction (inter-operator), which is acceptable only if the inter-session offset is removed. SDD(95) values ranged from 4.4° to 8.6° for the inter-operator and between 4.9° and 8.5° for the intra-operator agreement. In conclusion, ISEO presents a high intra- and inter-operator agreement, particularly with the scapula inter-session offset removed. Copyright © 2011 Elsevier B.V. All rights reserved.

Conceptual Model Formalization in a Semantic Interoperability Service Framework: Transforming Relational Database Schemas to OWL.

PubMed

Bravo, Carlos; Suarez, Carlos; González, Carolina; López, Diego; Blobel, Bernd

2014-01-01

Healthcare information is distributed through multiple heterogeneous and autonomous systems. Access to, and sharing of, distributed information sources are a challenging task. To contribute to meeting this challenge, this paper presents a formal, complete and semi-automatic transformation service from Relational Databases to Web Ontology Language. The proposed service makes use of an algorithm that allows to transform several data models of different domains by deploying mainly inheritance rules. The paper emphasizes the relevance of integrating the proposed approach into an ontology-based interoperability service to achieve semantic interoperability.

Scientific Digital Libraries, Interoperability, and Ontologies

NASA Technical Reports Server (NTRS)

Hughes, J. Steven; Crichton, Daniel J.; Mattmann, Chris A.

2009-01-01

Scientific digital libraries serve complex and evolving research communities. Justifications for the development of scientific digital libraries include the desire to preserve science data and the promises of information interconnectedness, correlative science, and system interoperability. Shared ontologies are fundamental to fulfilling these promises. We present a tool framework, some informal principles, and several case studies where shared ontologies are used to guide the implementation of scientific digital libraries. The tool framework, based on an ontology modeling tool, was configured to develop, manage, and keep shared ontologies relevant within changing domains and to promote the interoperability, interconnectedness, and correlation desired by scientists.

The Earth System Prediction Suite: Toward a Coordinated U.S. Modeling Capability

DOE PAGES

Theurich, Gerhard; DeLuca, C.; Campbell, T.; ...

2016-08-22

The Earth System Prediction Suite (ESPS) is a collection of flagship U.S. weather and climate models and model components that are being instrumented to conform to interoperability conventions, documented to follow metadata standards, and made available either under open-source terms or to credentialed users. Furthermore, the ESPS represents a culmination of efforts to create a common Earth system model architecture, and the advent of increasingly coordinated model development activities in the United States. ESPS component interfaces are based on the Earth System Modeling Framework (ESMF), community-developed software for building and coupling models, and the National Unified Operational Prediction Capability (NUOPC)more » Layer, a set of ESMF-based component templates and interoperability conventions. Our shared infrastructure simplifies the process of model coupling by guaranteeing that components conform to a set of technical and semantic behaviors. The ESPS encourages distributed, multiagency development of coupled modeling systems; controlled experimentation and testing; and exploration of novel model configurations, such as those motivated by research involving managed and interactive ensembles. ESPS codes include the Navy Global Environmental Model (NAVGEM), the Hybrid Coordinate Ocean Model (HYCOM), and the Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS); the NOAA Environmental Modeling System (NEMS) and the Modular Ocean Model (MOM); the Community Earth System Model (CESM); and the NASA ModelE climate model and the Goddard Earth Observing System Model, version 5 (GEOS-5), atmospheric general circulation model.« less

The Earth System Prediction Suite: Toward a Coordinated U.S. Modeling Capability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Theurich, Gerhard; DeLuca, C.; Campbell, T.

The Earth System Prediction Suite (ESPS) is a collection of flagship U.S. weather and climate models and model components that are being instrumented to conform to interoperability conventions, documented to follow metadata standards, and made available either under open-source terms or to credentialed users. Furthermore, the ESPS represents a culmination of efforts to create a common Earth system model architecture, and the advent of increasingly coordinated model development activities in the United States. ESPS component interfaces are based on the Earth System Modeling Framework (ESMF), community-developed software for building and coupling models, and the National Unified Operational Prediction Capability (NUOPC)more » Layer, a set of ESMF-based component templates and interoperability conventions. Our shared infrastructure simplifies the process of model coupling by guaranteeing that components conform to a set of technical and semantic behaviors. The ESPS encourages distributed, multiagency development of coupled modeling systems; controlled experimentation and testing; and exploration of novel model configurations, such as those motivated by research involving managed and interactive ensembles. ESPS codes include the Navy Global Environmental Model (NAVGEM), the Hybrid Coordinate Ocean Model (HYCOM), and the Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS); the NOAA Environmental Modeling System (NEMS) and the Modular Ocean Model (MOM); the Community Earth System Model (CESM); and the NASA ModelE climate model and the Goddard Earth Observing System Model, version 5 (GEOS-5), atmospheric general circulation model.« less

49 CFR 232.603 - Design, interoperability, and configuration management requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: 1999; Revised 2002, 2007); (3) AAR S-4220, “ECP Cable-Based Brake DC Power Supply—Performance...; Revised: 2004); (7) AAR S-4260, “ECP Brake and Wire Distributed Power Interoperability Test Procedures...) Approval. A freight train or freight car equipped with an ECP brake system and equipment covered by the AAR...

On the feasibility of interoperable schemes in hand biometrics.

PubMed

Morales, Aythami; González, Ester; Ferrer, Miguel A

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors.

On the Feasibility of Interoperable Schemes in Hand Biometrics

PubMed Central

Morales, Aythami; González, Ester; Ferrer, Miguel A.

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors. PMID:22438714

Plugfest 2009: Global Interoperability in Telerobotics and Telemedicine

PubMed Central

King, H. Hawkeye; Hannaford, Blake; Kwok, Ka-Wai; Yang, Guang-Zhong; Griffiths, Paul; Okamura, Allison; Farkhatdinov, Ildar; Ryu, Jee-Hwan; Sankaranarayanan, Ganesh; Arikatla, Venkata; Tadano, Kotaro; Kawashima, Kenji; Peer, Angelika; Schauß, Thomas; Buss, Martin; Miller, Levi; Glozman, Daniel; Rosen, Jacob; Low, Thomas

2014-01-01

Despite the great diversity of teleoperator designs and applications, their underlying control systems have many similarities. These similarities can be exploited to enable inter-operability between heterogeneous systems. We have developed a network data specification, the Interoperable Telerobotics Protocol, that can be used for Internet based control of a wide range of teleoperators. In this work we test interoperable telerobotics on the global Internet, focusing on the telesurgery application domain. Fourteen globally dispersed telerobotic master and slave systems were connected in thirty trials in one twenty four hour period. Users performed common manipulation tasks to demonstrate effective master-slave operation. With twenty eight (93%) successful, unique connections the results show a high potential for standardizing telerobotic operation. Furthermore, new paradigms for telesurgical operation and training are presented, including a networked surgery trainer and upper-limb exoskeleton control of micro-manipulators. PMID:24748993

Leveraging standards to support patient-centric interdisciplinary plans of care.

PubMed

Dykes, Patricia C; DaDamio, Rebecca R; Goldsmith, Denise; Kim, Hyeon-eui; Ohashi, Kumiko; Saba, Virginia K

2011-01-01

As health care systems and providers move towards meaningful use of electronic health records, the once distant vision of collaborative patient-centric, interdisciplinary plans of care, generated and updated across organizations and levels of care, may soon become a reality. Effective care planning is included in the proposed Stages 2-3 Meaningful Use quality measures. To facilitate interoperability, standardization of plan of care messaging, content, information and terminology models are needed. This degree of standardization requires local and national coordination. The purpose of this paper is to review some existing standards that may be leveraged to support development of interdisciplinary patient-centric plans of care. Standards are then applied to a use case to demonstrate one method for achieving patient-centric and interoperable interdisciplinary plan of care documentation. Our pilot work suggests that existing standards provide a foundation for adoption and implementation of patient-centric plans of care that are consistent with federal requirements.

Report on Computing and Networking in the Space Science Laboratory by the SSL Computer Committee

NASA Technical Reports Server (NTRS)

Gallagher, D. L. (Editor)

1993-01-01

The Space Science Laboratory (SSL) at Marshall Space Flight Center is a multiprogram facility. Scientific research is conducted in four discipline areas: earth science and applications, solar-terrestrial physics, astrophysics, and microgravity science and applications. Representatives from each of these discipline areas participate in a Laboratory computer requirements committee, which developed this document. The purpose is to establish and discuss Laboratory objectives for computing and networking in support of science. The purpose is also to lay the foundation for a collective, multiprogram approach to providing these services. Special recognition is given to the importance of the national and international efforts of our research communities toward the development of interoperable, network-based computer applications.

IHE based interoperability - benefits and challenges.

PubMed

Wozak, Florian; Ammenwerth, Elske; Hörbst, Alexander; Sögner, Peter; Mair, Richard; Schabetsberger, Thomas

2008-01-01

Optimized workflows and communication between institutions involved in a patient's treatment process can lead to improved quality and efficiency in the healthcare sector. Electronic Health Records (EHRs) provide a patient-centered access to clinical data across institutional boundaries supporting the above mentioned aspects. Interoperability is regarded as vital success factor. However a clear definition of interoperability does not exist. The aim of this work is to define and to assess interoperability criteria as required for EHRs. The definition and assessment of interoperability criteria is supported by the analysis of existing literature and personal experience as well as by discussions with several domain experts. Criteria for interoperability addresses the following aspects: Interfaces, Semantics, Legal and organizational aspects and Security. The Integrating the Healthcare Enterprises initiative (IHE) profiles make a major contribution to these aspects, but they also arise new problems. Flexibility for adoption to different organizational/regional or other specific conditions is missing. Regional or national initiatives should get a possibility to realize their specific needs within the boundaries of IHE profiles. Security so far is an optional element which is one of IHE greatest omissions. An integrated security approach seems to be preferable. Irrespective of the so far practical significance of the IHE profiles it appears to be of great importance, that the profiles are constantly checked against practical experiences and are continuously adapted.

Special Topic Interoperability and EHR: Combining openEHR, SNOMED, IHE, and Continua as approaches to interoperability on national eHealth.

PubMed

Beštek, Mate; Stanimirović, Dalibor

2017-08-09

The main aims of the paper comprise the characterization and examination of the potential approaches regarding interoperability. This includes openEHR, SNOMED, IHE, and Continua as combined interoperability approaches, possibilities for their incorporation into the eHealth environment, and identification of the main success factors in the field, which are necessary for achieving required interoperability, and consequently, for the successful implementation of eHealth projects in general. The paper represents an in-depth analysis regarding the potential application of openEHR, SNOMED, IHE and Continua approaches in the development and implementation process of eHealth in Slovenia. The research method used is both exploratory and deductive in nature. The methodological framework is grounded on information retrieval with a special focus on research and charting of existing experience in the field, and sources, both electronic and written, which include interoperability concepts and related implementation issues. The paper will try to answer the following inquiries that are complementing each other: 1. Scrutiny of the potential approaches, which could alleviate the pertinent interoperability issues in the Slovenian eHealth context. 2. Analyzing the possibilities (requirements) for their inclusion in the construction process for individual eHealth solutions. 3. Identification and charting the main success factors in the interoperability field that critically influence development and implementation of eHealth projects in an efficient manner. Provided insights and identified success factors could serve as a constituent of the strategic starting points for continuous integration of interoperability principles into the healthcare domain. Moreover, the general implementation of the identified success factors could facilitate better penetration of ICT into the healthcare environment and enable the eHealth-based transformation of the health system especially in the countries which are still in an early phase of eHealth planning and development and are often confronted with differing interests, requirements, and contending strategies.

Measures for interoperability of phenotypic data: minimum information requirements and formatting.

PubMed

Ćwiek-Kupczyńska, Hanna; Altmann, Thomas; Arend, Daniel; Arnaud, Elizabeth; Chen, Dijun; Cornut, Guillaume; Fiorani, Fabio; Frohmberg, Wojciech; Junker, Astrid; Klukas, Christian; Lange, Matthias; Mazurek, Cezary; Nafissi, Anahita; Neveu, Pascal; van Oeveren, Jan; Pommier, Cyril; Poorter, Hendrik; Rocca-Serra, Philippe; Sansone, Susanna-Assunta; Scholz, Uwe; van Schriek, Marco; Seren, Ümit; Usadel, Björn; Weise, Stephan; Kersey, Paul; Krajewski, Paweł

2016-01-01

Plant phenotypic data shrouds a wealth of information which, when accurately analysed and linked to other data types, brings to light the knowledge about the mechanisms of life. As phenotyping is a field of research comprising manifold, diverse and time-consuming experiments, the findings can be fostered by reusing and combining existing datasets. Their correct interpretation, and thus replicability, comparability and interoperability, is possible provided that the collected observations are equipped with an adequate set of metadata. So far there have been no common standards governing phenotypic data description, which hampered data exchange and reuse. In this paper we propose the guidelines for proper handling of the information about plant phenotyping experiments, in terms of both the recommended content of the description and its formatting. We provide a document called "Minimum Information About a Plant Phenotyping Experiment", which specifies what information about each experiment should be given, and a Phenotyping Configuration for the ISA-Tab format, which allows to practically organise this information within a dataset. We provide examples of ISA-Tab-formatted phenotypic data, and a general description of a few systems where the recommendations have been implemented. Acceptance of the rules described in this paper by the plant phenotyping community will help to achieve findable, accessible, interoperable and reusable data.

Requirements Development for Interoperability Simulation Capability for Law Enforcement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holter, Gregory M.

2004-05-19

The National Counterdrug Center (NCC) was initially authorized by Congress in FY 1999 appropriations to create a simulation-based counterdrug interoperability training capability. As the lead organization for Research and Analysis to support the NCC, the Pacific Northwest National Laboratory (PNNL) was responsible for developing the requirements for this interoperability simulation capability. These requirements were structured to address the hardware and software components of the system, as well as the deployment and use of the system. The original set of requirements was developed through a process of conducting a user-based survey of requirements for the simulation capability, coupled with an analysismore » of similar development efforts. The user-based approach ensured that existing concerns with respect to interoperability within the law enforcement community would be addressed. Law enforcement agencies within the designated pilot area of Cochise County, Arizona, were surveyed using interviews and ride-alongs during actual operations. The results of this survey were then accumulated, organized, and validated with the agencies to ensure the accuracy of the results. These requirements were then supplemented by adapting operational requirements from existing systems to ensure system reliability and operability. The NCC adopted a development approach providing incremental capability through the fielding of a phased series of progressively more capable versions of the system. This allowed for feedback from system users to be incorporated into subsequent revisions of the system requirements, and also allowed the addition of new elements as needed to adapt the system to broader geographic and geopolitical areas, including areas along the southwest and northwest U.S. borders. This paper addresses the processes used to develop and refine requirements for the NCC interoperability simulation capability, as well as the response of the law enforcement community to the use of the NCC system. The paper also addresses the applicability of such an interoperability simulation capability to a broader set of law enforcement, border protection, site/facility security, and first-responder needs.« less

Low-earth-orbit Satellite Internet Protocol Communications Concept and Design

NASA Technical Reports Server (NTRS)

Slywezak, Richard A.

2004-01-01

This report presents a design concept for a low-Earth-orbit end-to-end Internet-Protocol- (IP-) based mission. The goal is to maintain an up-to-date communications infrastructure that makes communications seamless with the protocols used in terrestrial computing. It is based on the premise that the use of IPs will permit greater interoperability while also reducing costs and providing users the ability to retrieve data directly from the satellite. However, implementing an IP-based solution also has a number of challenges, since wireless communications have different characteristics than wired communications. This report outlines the design of a low-Earth-orbit end-to-end IP-based mission; the ideas and concepts of Space Internet architectures and networks are beyond the scope of this document. The findings of this report show that an IP-based mission is plausible and would provide benefits to the user community, but the outstanding issues must be resolved before a design can be implemented.

Health Information Technology, Patient Safety, and Professional Nursing Care Documentation in Acute Care Settings.

PubMed

Lavin, Mary Ann; Harper, Ellen; Barr, Nancy

2015-04-14

The electronic health record (EHR) is a documentation tool that yields data useful in enhancing patient safety, evaluating care quality, maximizing efficiency, and measuring staffing needs. Although nurses applaud the EHR, they also indicate dissatisfaction with its design and cumbersome electronic processes. This article describes the views of nurses shared by members of the Nursing Practice Committee of the Missouri Nurses Association; it encourages nurses to share their EHR concerns with Information Technology (IT) staff and vendors and to take their place at the table when nursing-related IT decisions are made. In this article, we describe the experiential-reflective reasoning and action model used to understand staff nurses' perspectives, share committee reflections and recommendations for improving both documentation and documentation technology, and conclude by encouraging nurses to develop their documentation and informatics skills. Nursing issues include medication safety, documentation and standards of practice, and EHR efficiency. IT concerns include interoperability, vendors, innovation, nursing voice, education, and collaboration.

National Geothermal Data System: Open Access to Geoscience Data, Maps, and Documents

NASA Astrophysics Data System (ADS)

Caudill, C. M.; Richard, S. M.; Musil, L.; Sonnenschein, A.; Good, J.

2014-12-01

The U.S. National Geothermal Data System (NGDS) provides free open access to millions of geoscience data records, publications, maps, and reports via distributed web services to propel geothermal research, development, and production. NGDS is built on the US Geoscience Information Network (USGIN) data integration framework, which is a joint undertaking of the USGS and the Association of American State Geologists (AASG), and is compliant with international standards and protocols. NGDS currently serves geoscience information from 60+ data providers in all 50 states. Free and open source software is used in this federated system where data owners maintain control of their data. This interactive online system makes geoscience data easily discoverable, accessible, and interoperable at no cost to users. The dynamic project site http://geothermaldata.org serves as the information source and gateway to the system, allowing data and applications discovery and availability of the system's data feed. It also provides access to NGDS specifications and the free and open source code base (on GitHub), a map-centric and library style search interface, other software applications utilizing NGDS services, NGDS tutorials (via YouTube and USGIN site), and user-created tools and scripts. The user-friendly map-centric web-based application has been created to support finding, visualizing, mapping, and acquisition of data based on topic, location, time, provider, or key words. Geographic datasets visualized through the map interface also allow users to inspect the details of individual GIS data points (e.g. wells, geologic units, etc.). In addition, the interface provides the information necessary for users to access the GIS data from third party software applications such as GoogleEarth, UDig, and ArcGIS. A redistributable, free and open source software package called GINstack (USGIN software stack) was also created to give data providers a simple way to release data using interoperable and shareable standards, upload data and documents, and expose those data as a node in the NGDS or any larger data system through a CSW endpoint. The easy-to-use interface is supported by back-end software including Postgres, GeoServer, and custom CKAN extensions among others.

MMI: Increasing Community Collaboration

NASA Astrophysics Data System (ADS)

Galbraith, N. R.; Stocks, K.; Neiswender, C.; Maffei, A.; Bermudez, L.

2007-12-01

Building community requires a collaborative environment and guidance to help move members towards a common goal. An effective environment for community collaboration is a workspace that fosters participation and cooperation; effective guidance furthers common understanding and promotes best practices. The Marine Metadata Interoperability (MMI) project has developed a community web site to provide a collaborative environment for scientists, technologists, and data managers from around the world to learn about metadata and exchange ideas. Workshops, demonstration projects, and presentations also provide community-building opportunities for MMI. MMI has developed comprehensive online guides to help users understand and work with metadata standards, ontologies, and other controlled vocabularies. Documents such as "The Importance of Metadata Standards", "Usage vs. Discovery Vocabularies" and "Developing Controlled Vocabularies" guide scientists and data managers through a variety of metadata-related concepts. Members from eight organizations involved in marine science and informatics collaborated on this effort. The MMI web site has moved from Plone to Drupal, two content management systems which provide different opportunities for community-based work. Drupal's "organic groups" feature will be used to provide workspace for future teams tasked with content development, outreach, and other MMI mission-critical work. The new site is designed to enable members to easily create working areas, to build communities dedicated to developing consensus on metadata and other interoperability issues. Controlled-vocabulary-driven menus, integrated mailing-lists, member-based content creation and review tools are facets of the new web site architecture. This move provided the challenge of developing a hierarchical vocabulary to describe the resources presented on the site; consistent and logical tagging of web pages is the basis of Drupal site navigation. The new MMI web site presents enhanced opportunities for electronic discussions, focused collaborative work, and even greater community participation. The MMI project is beginning a new initiative to comprehensively catalog and document tools for marine metadata. The new MMI community-based web site will be used to support this work and to support the work of other ad-hoc teams in the future. We are seeking broad input from the community on this effort.

A SOA-Based Solution to Monitor Vaccination Coverage Among HIV-Infected Patients in Liguria.

PubMed

Giannini, Barbara; Gazzarata, Roberta; Sticchi, Laura; Giacomini, Mauro

2016-01-01

Vaccination in HIV-infected patients constitutes an essential tool in the prevention of the most common infectious diseases. The Ligurian Vaccination in HIV Program is a proposed vaccination schedule specifically dedicated to this risk group. Selective strategies are proposed within this program, employing ICT (Information and Communication) tools to identify this susceptible target group, to monitor immunization coverage over time and to manage failures and defaulting. The proposal is to connect an immunization registry system to an existing regional platform that allows clinical data re-use among several medical structures, to completely manage the vaccination process. This architecture will adopt a Service Oriented Architecture (SOA) approach and standard HSSP (Health Services Specification Program) interfaces to support interoperability. According to the presented solution, vaccination administration information retrieved from the immunization registry will be structured according to the specifications within the immunization section of the HL7 (Health Level 7) CCD (Continuity of Care Document) document. Immunization coverage will be evaluated through the continuous monitoring of serology and antibody titers gathered from the hospital LIS (Laboratory Information System) structured into a HL7 Version 3 (v3) Clinical Document Architecture Release 2 (CDA R2).

Rosetta: Ensuring the Preservation and Usability of ASCII-based Data into the Future

NASA Astrophysics Data System (ADS)

Ramamurthy, M. K.; Arms, S. C.

2015-12-01

Field data obtained from dataloggers often take the form of comma separated value (CSV) ASCII text files. While ASCII based data formats have positive aspects, such as the ease of accessing the data from disk and the wide variety of tools available for data analysis, there are some drawbacks, especially when viewing the situation through the lens of data interoperability and stewardship. The Unidata data translation tool, Rosetta, is a web-based service that provides an easy, wizard-based interface for data collectors to transform their datalogger generated ASCII output into Climate and Forecast (CF) compliant netCDF files following the CF-1.6 discrete sampling geometries. These files are complete with metadata describing what data are contained in the file, the instruments used to collect the data, and other critical information that otherwise may be lost in one of many README files. The choice of the machine readable netCDF data format and data model, coupled with the CF conventions, ensures long-term preservation and interoperability, and that future users will have enough information to responsibly use the data. However, with the understanding that the observational community appreciates the ease of use of ASCII files, methods for transforming the netCDF back into a CSV or spreadsheet format are also built-in. One benefit of translating ASCII data into a machine readable format that follows open community-driven standards is that they are instantly able to take advantage of data services provided by the many open-source data server tools, such as the THREDDS Data Server (TDS). While Rosetta is currently a stand-alone service, this talk will also highlight efforts to couple Rosetta with the TDS, thus allowing self-publishing of thoroughly documented datasets by the data producers themselves.

Risk Management Considerations for Interoperable Acquisition

DTIC Science & Technology

2006-08-01

Electronics Engineers (IEEE) to harmonize the standards for software (IEEE 12207 ) and system (IEEE 15288) life-cycle processes. A goal of this harmonization...management ( ISO /IEC 16085) is being generalized to apply to the systems level. The revised, generalized standard will add require- ments and guidance for the...risk management. The documents include the following: • ISO /IEC Guide 73: Risk Management—Vocabulary—Guidelines for use in stan- dards [ ISO 02

Integrating semantic dimension into openEHR archetypes for the management of cerebral palsy electronic medical records.

PubMed

Ellouze, Afef Samet; Bouaziz, Rafik; Ghorbel, Hanen

2016-10-01

Integrating semantic dimension into clinical archetypes is necessary once modeling medical records. First, it enables semantic interoperability and, it offers applying semantic activities on clinical data and provides a higher design quality of Electronic Medical Record (EMR) systems. However, to obtain these advantages, designers need to use archetypes that cover semantic features of clinical concepts involved in their specific applications. In fact, most of archetypes filed within open repositories are expressed in the Archetype Definition Language (ALD) which allows defining only the syntactic structure of clinical concepts weakening semantic activities on the EMR content in the semantic web environment. This paper focuses on the modeling of an EMR prototype for infants affected by Cerebral Palsy (CP), using the dual model approach and integrating semantic web technologies. Such a modeling provides a better delivery of quality of care and ensures semantic interoperability between all involved therapies' information systems. First, data to be documented are identified and collected from the involved therapies. Subsequently, data are analyzed and arranged into archetypes expressed in accordance of ADL. During this step, open archetype repositories are explored, in order to find the suitable archetypes. Then, ADL archetypes are transformed into archetypes expressed in OWL-DL (Ontology Web Language - Description Language). Finally, we construct an ontological source related to these archetypes enabling hence their annotation to facilitate data extraction and providing possibility to exercise semantic activities on such archetypes. Semantic dimension integration into EMR modeled in accordance to the archetype approach. The feasibility of our solution is shown through the development of a prototype, baptized "CP-SMS", which ensures semantic exploitation of CP EMR. This prototype provides the following features: (i) creation of CP EMR instances and their checking by using a knowledge base which we have constructed by interviews with domain experts, (ii) translation of initially CP ADL archetypes into CP OWL-DL archetypes, (iii) creation of an ontological source which we can use to annotate obtained archetypes and (vi) enrichment and supply of the ontological source and integration of semantic relations by providing hence fueling the ontology with new concepts, ensuring consistency and eliminating ambiguity between concepts. The degree of semantic interoperability that could be reached between EMR systems depends strongly on the quality of the used archetypes. Thus, the integration of semantic dimension in archetypes modeling process is crucial. By creating an ontological source and annotating archetypes, we create a supportive platform ensuring semantic interoperability between archetypes-based EMR-systems. Copyright © 2016. Published by Elsevier Inc.

Development and application of a real-time testbed for multiagent system interoperability: A case study on hierarchical microgrid control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cintuglu, Mehmet Hazar; Youssef, Tarek; Mohammed, Osama A.

This article presents the development and application of a real-time testbed for multiagent system interoperability. As utility independent private microgrids are installed constantly, standardized interoperability frameworks are required to define behavioral models of the individual agents for expandability and plug-and-play operation. In this paper, we propose a comprehensive hybrid agent framework combining the foundation for intelligent physical agents (FIPA), IEC 61850, and data distribution service (DDS) standards. The IEC 61850 logical node concept is extended using FIPA based agent communication language (ACL) with application specific attributes and deliberative behavior modeling capability. The DDS middleware is adopted to enable a real-timemore » publisher-subscriber interoperability mechanism between platforms. The proposed multi-agent framework was validated in a laboratory based testbed involving developed intelligent electronic device (IED) prototypes and actual microgrid setups. Experimental results were demonstrated for both decentralized and distributed control approaches. Secondary and tertiary control levels of a microgrid were demonstrated for decentralized hierarchical control case study. A consensus-based economic dispatch case study was demonstrated as a distributed control example. Finally, it was shown that the developed agent platform is industrially applicable for actual smart grid field deployment.« less

Development and application of a real-time testbed for multiagent system interoperability: A case study on hierarchical microgrid control

DOE PAGES

Cintuglu, Mehmet Hazar; Youssef, Tarek; Mohammed, Osama A.

2016-08-10

This article presents the development and application of a real-time testbed for multiagent system interoperability. As utility independent private microgrids are installed constantly, standardized interoperability frameworks are required to define behavioral models of the individual agents for expandability and plug-and-play operation. In this paper, we propose a comprehensive hybrid agent framework combining the foundation for intelligent physical agents (FIPA), IEC 61850, and data distribution service (DDS) standards. The IEC 61850 logical node concept is extended using FIPA based agent communication language (ACL) with application specific attributes and deliberative behavior modeling capability. The DDS middleware is adopted to enable a real-timemore » publisher-subscriber interoperability mechanism between platforms. The proposed multi-agent framework was validated in a laboratory based testbed involving developed intelligent electronic device (IED) prototypes and actual microgrid setups. Experimental results were demonstrated for both decentralized and distributed control approaches. Secondary and tertiary control levels of a microgrid were demonstrated for decentralized hierarchical control case study. A consensus-based economic dispatch case study was demonstrated as a distributed control example. Finally, it was shown that the developed agent platform is industrially applicable for actual smart grid field deployment.« less

An Approach to Semantic Interoperability for Improved Capability Exchanges in Federations of Systems

ERIC Educational Resources Information Center

Moschoglou, Georgios

2013-01-01

This study seeks an affirmative answer to the question whether a knowledge-based approach to system of systems interoperation using semantic web standards and technologies can provide the centralized control of the capability for exchanging data and services lacking in a federation of systems. Given the need to collect and share real-time…

Metadata behind the Interoperability of Wireless Sensor Networks

PubMed Central

Ballari, Daniela; Wachowicz, Monica; Callejo, Miguel Angel Manso

2009-01-01

Wireless Sensor Networks (WSNs) produce changes of status that are frequent, dynamic and unpredictable, and cannot be represented using a linear cause-effect approach. Consequently, a new approach is needed to handle these changes in order to support dynamic interoperability. Our approach is to introduce the notion of context as an explicit representation of changes of a WSN status inferred from metadata elements, which in turn, leads towards a decision-making process about how to maintain dynamic interoperability. This paper describes the developed context model to represent and reason over different WSN status based on four types of contexts, which have been identified as sensing, node, network and organisational contexts. The reasoning has been addressed by developing contextualising and bridges rules. As a result, we were able to demonstrate how contextualising rules have been used to reason on changes of WSN status as a first step towards maintaining dynamic interoperability. PMID:22412330

Metadata behind the Interoperability of Wireless Sensor Networks.

PubMed

Ballari, Daniela; Wachowicz, Monica; Callejo, Miguel Angel Manso

2009-01-01

Wireless Sensor Networks (WSNs) produce changes of status that are frequent, dynamic and unpredictable, and cannot be represented using a linear cause-effect approach. Consequently, a new approach is needed to handle these changes in order to support dynamic interoperability. Our approach is to introduce the notion of context as an explicit representation of changes of a WSN status inferred from metadata elements, which in turn, leads towards a decision-making process about how to maintain dynamic interoperability. This paper describes the developed context model to represent and reason over different WSN status based on four types of contexts, which have been identified as sensing, node, network and organisational contexts. The reasoning has been addressed by developing contextualising and bridges rules. As a result, we were able to demonstrate how contextualising rules have been used to reason on changes of WSN status as a first step towards maintaining dynamic interoperability.

Sharing and interoperation of Digital Dongying geospatial data

NASA Astrophysics Data System (ADS)

Zhao, Jun; Liu, Gaohuan; Han, Lit-tao; Zhang, Rui-ju; Wang, Zhi-an

2006-10-01

Digital Dongying project was put forward by Dongying city, Shandong province, and authenticated by Ministry of Information Industry, Ministry of Science and Technology and Ministry of Construction P.R.CHINA in 2002. After five years of building, informationization level of Dongying has reached to the advanced degree. In order to forward the step of digital Dongying building, and to realize geospatial data sharing, geographic information sharing standards are drawn up and applied into realization. Secondly, Digital Dongying Geographic Information Sharing Platform has been constructed and developed, which is a highly integrated platform of WEBGIS. 3S (GIS, GPS, RS), Object oriented RDBMS, Internet, DCOM, etc. It provides an indispensable platform for sharing and interoperation of Digital Dongying Geospatial Data. According to the standards, and based on the platform, sharing and interoperation of "Digital Dongying" geospatial data have come into practice and the good results have been obtained. However, a perfect leadership group is necessary for data sharing and interoperation.

A federated design for a neurobiological simulation engine: the CBI federated software architecture.

PubMed

Cornelis, Hugo; Coop, Allan D; Bower, James M

2012-01-01

Simulator interoperability and extensibility has become a growing requirement in computational biology. To address this, we have developed a federated software architecture. It is federated by its union of independent disparate systems under a single cohesive view, provides interoperability through its capability to communicate, execute programs, or transfer data among different independent applications, and supports extensibility by enabling simulator expansion or enhancement without the need for major changes to system infrastructure. Historically, simulator interoperability has relied on development of declarative markup languages such as the neuron modeling language NeuroML, while simulator extension typically occurred through modification of existing functionality. The software architecture we describe here allows for both these approaches. However, it is designed to support alternative paradigms of interoperability and extensibility through the provision of logical relationships and defined application programming interfaces. They allow any appropriately configured component or software application to be incorporated into a simulator. The architecture defines independent functional modules that run stand-alone. They are arranged in logical layers that naturally correspond to the occurrence of high-level data (biological concepts) versus low-level data (numerical values) and distinguish data from control functions. The modular nature of the architecture and its independence from a given technology facilitates communication about similar concepts and functions for both users and developers. It provides several advantages for multiple independent contributions to software development. Importantly, these include: (1) Reduction in complexity of individual simulator components when compared to the complexity of a complete simulator, (2) Documentation of individual components in terms of their inputs and outputs, (3) Easy removal or replacement of unnecessary or obsoleted components, (4) Stand-alone testing of components, and (5) Clear delineation of the development scope of new components.

A Federated Design for a Neurobiological Simulation Engine: The CBI Federated Software Architecture

PubMed Central

Cornelis, Hugo; Coop, Allan D.; Bower, James M.

2012-01-01

Simulator interoperability and extensibility has become a growing requirement in computational biology. To address this, we have developed a federated software architecture. It is federated by its union of independent disparate systems under a single cohesive view, provides interoperability through its capability to communicate, execute programs, or transfer data among different independent applications, and supports extensibility by enabling simulator expansion or enhancement without the need for major changes to system infrastructure. Historically, simulator interoperability has relied on development of declarative markup languages such as the neuron modeling language NeuroML, while simulator extension typically occurred through modification of existing functionality. The software architecture we describe here allows for both these approaches. However, it is designed to support alternative paradigms of interoperability and extensibility through the provision of logical relationships and defined application programming interfaces. They allow any appropriately configured component or software application to be incorporated into a simulator. The architecture defines independent functional modules that run stand-alone. They are arranged in logical layers that naturally correspond to the occurrence of high-level data (biological concepts) versus low-level data (numerical values) and distinguish data from control functions. The modular nature of the architecture and its independence from a given technology facilitates communication about similar concepts and functions for both users and developers. It provides several advantages for multiple independent contributions to software development. Importantly, these include: (1) Reduction in complexity of individual simulator components when compared to the complexity of a complete simulator, (2) Documentation of individual components in terms of their inputs and outputs, (3) Easy removal or replacement of unnecessary or obsoleted components, (4) Stand-alone testing of components, and (5) Clear delineation of the development scope of new components. PMID:22242154

Multi-disciplinary interoperability challenges (Ian McHarg Medal Lecture)

NASA Astrophysics Data System (ADS)

Annoni, Alessandro

2013-04-01

Global sustainability research requires multi-disciplinary efforts to address the key research challenges to increase our understanding of the complex relationships between environment and society. For this reason dependence on ICT systems interoperability is rapidly growing but, despite some relevant technological improvement is observed, in practice operational interoperable solutions are still lacking. Among the causes is the absence of a generally accepted definition of "interoperability" in all its broader aspects. In fact the concept of interoperability is just a concept and the more popular definitions are not addressing all challenges to realize operational interoperable solutions. The problem become even more complex when multi-disciplinary interoperability is required because in that case solutions for interoperability of different interoperable solution should be envisaged. In this lecture the following definition will be used: "interoperability is the ability to exchange information and to use it". In the lecture the main challenges for addressing multi-disciplinary interoperability will be presented and a set of proposed approaches/solutions shortly introduced.

Semantic interoperability--HL7 Version 3 compared to advanced architecture standards.

PubMed

Blobel, B G M E; Engel, K; Pharow, P

2006-01-01

To meet the challenge for high quality and efficient care, highly specialized and distributed healthcare establishments have to communicate and co-operate in a semantically interoperable way. Information and communication technology must be open, flexible, scalable, knowledge-based and service-oriented as well as secure and safe. For enabling semantic interoperability, a unified process for defining and implementing the architecture, i.e. structure and functions of the cooperating systems' components, as well as the approach for knowledge representation, i.e. the used information and its interpretation, algorithms, etc. have to be defined in a harmonized way. Deploying the Generic Component Model, systems and their components, underlying concepts and applied constraints must be formally modeled, strictly separating platform-independent from platform-specific models. As HL7 Version 3 claims to represent the most successful standard for semantic interoperability, HL7 has been analyzed regarding the requirements for model-driven, service-oriented design of semantic interoperable information systems, thereby moving from a communication to an architecture paradigm. The approach is compared with advanced architectural approaches for information systems such as OMG's CORBA 3 or EHR systems such as GEHR/openEHR and CEN EN 13606 Electronic Health Record Communication. HL7 Version 3 is maturing towards an architectural approach for semantic interoperability. Despite current differences, there is a close collaboration between the teams involved guaranteeing a convergence between competing approaches.

A reference architecture for integrated EHR in Colombia.

PubMed

de la Cruz, Edgar; Lopez, Diego M; Uribe, Gustavo; Gonzalez, Carolina; Blobel, Bernd

2011-01-01

The implementation of national EHR infrastructures has to start by a detailed definition of the overall structure and behavior of the EHR system (system architecture). Architectures have to be open, scalable, flexible, user accepted and user friendly, trustworthy, based on standards including terminologies and ontologies. The GCM provides an architectural framework created with the purpose of analyzing any kind of system, including EHR system´s architectures. The objective of this paper is to propose a reference architecture for the implementation of an integrated EHR in Colombia, based on the current state of system´s architectural models, and EHR standards. The proposed EHR architecture defines a set of services (elements) and their interfaces, to support the exchange of clinical documents, offering an open, scalable, flexible and semantically interoperable infrastructure. The architecture was tested in a pilot tele-consultation project in Colombia, where dental EHR are exchanged.

NCPP's Use of Standard Metadata to Promote Open and Transparent Climate Modeling

NASA Astrophysics Data System (ADS)

Treshansky, A.; Barsugli, J. J.; Guentchev, G.; Rood, R. B.; DeLuca, C.

2012-12-01

The National Climate Predictions and Projections (NCPP) Platform is developing comprehensive regional and local information about the evolving climate to inform decision making and adaptation planning. This includes both creating and providing tools to create metadata about the models and processes used to create its derived data products. NCPP is using the Common Information Model (CIM), an ontology developed by a broad set of international partners in climate research, as its metadata language. This use of a standard ensures interoperability within the climate community as well as permitting access to the ecosystem of tools and services emerging alongside the CIM. The CIM itself is divided into a general-purpose (UML & XML) schema which structures metadata documents, and a project or community-specific (XML) Controlled Vocabulary (CV) which constraints the content of metadata documents. NCPP has already modified the CIM Schema to accommodate downscaling models, simulations, and experiments. NCPP is currently developing a CV for use by the downscaling community. Incorporating downscaling into the CIM will lead to several benefits: easy access to the existing CIM Documents describing CMIP5 models and simulations that are being downscaled, access to software tools that have been developed in order to search, manipulate, and visualize CIM metadata, and coordination with national and international efforts such as ES-DOC that are working to make climate model descriptions and datasets interoperable. Providing detailed metadata descriptions which include the full provenance of derived data products will contribute to making that data (and, the models and processes which generated that data) more open and transparent to the user community.

EVA safety: Space suit system interoperability

NASA Technical Reports Server (NTRS)

Skoog, A. I.; McBarron, J. W.; Abramov, L. P.; Zvezda, A. O.

1995-01-01

The results and the recommendations of the International Academy of Astronautics extravehicular activities (IAA EVA) Committee work are presented. The IAA EVA protocols and operation were analyzed for harmonization procedures and for the standardization of safety critical and operationally important interfaces. The key role of EVA and how to improve the situation based on the identified EVA space suit system interoperability deficiencies were considered.

Using Fast Healthcare Interoperability Resources (FHIR) for the Integration of Risk Minimization Systems in Hospitals.

PubMed

Saleh, Kutaiba; Stucke, Stephan; Uciteli, Alexandr; Faulbrück-Röhr, Sebastian; Neumann, Juliane; Tahar, Kais; Ammon, Danny; Schmidt, Tobias; Neumuth, Thomas; Besting, Andreas; Portheine, Frank; Herre, Heinrich; Kaeding, André; Specht, Martin

2017-01-01

With the growing strain of medical staff and complexity of patient care, the risk of medical errors increases. In this work we present the use of Fast Healthcare Interoperability Resources (FHIR) as communication standard for the integration of an ontology- and agent-based system to identify risks across medical processes in a clinical environment.

Achieving control and interoperability through unified model-based systems and software engineering

NASA Technical Reports Server (NTRS)

Rasmussen, Robert; Ingham, Michel; Dvorak, Daniel

2005-01-01

Control and interoperation of complex systems is one of the most difficult challenges facing NASA's Exploration Systems Mission Directorate. An integrated but diverse array of vehicles, habitats, and supporting facilities, evolving over the long course of the enterprise, must perform ever more complex tasks while moving steadily away from the sphere of ground support and intervention.

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm.

PubMed

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration.

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm

PubMed Central

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Objective Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. Materials and methods We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Results Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. Conclusions We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration. PMID:23571850

Leverage and Delegation in Developing an Information Model for Geology

NASA Astrophysics Data System (ADS)

Cox, S. J.

2007-12-01

GeoSciML is an information model and XML encoding developed by a group of primarily geologic survey organizations under the auspices of the IUGS CGI. The scope of the core model broadly corresponds with information traditionally portrayed on a geologic map, viz. interpreted geology, some observations, the map legend and accompanying memoir. The development of GeoSciML has followed the methodology specified for an Application Schema defined by OGC and ISO 19100 series standards. This requires agreement within a community concerning their domain model, its formal representation using UML, documentation as a Feature Type Catalogue, with an XML Schema implementation generated from the model by applying a rule-based transformation. The framework and technology supports a modular governance process. Standard datatypes and GI components (geometry, the feature and coverage metamodels, metadata) are imported from the ISO framework. The observation and sampling model (including boreholes) is imported from OGC. The scale used for most scalar literal values (terms, codes, measures) allows for localization where necessary. Wildcards and abstract base- classes provide explicit extensibility points. Link attributes appear in a regular way in the encodings, allowing reference to external resources using URIs. The encoding is compatible with generic GI data-service interfaces (WFS, WMS, SOS). For maximum interoperability within a community, the interfaces may be specialised through domain-specified constraints (e.g. feature-types, scale and vocabulary bindings, query-models). Formalization using UML and XML allows use of standard validation and processing tools. Use of upper-level elements defined for generic GI application reduces the development effort and governance resonsibility, while maximising cross-domain interoperability. On the other hand, enabling specialization to be delegated in a controlled manner is essential to adoption across a range of subdisciplines and jurisdictions. The GeoSciML design team is responsible only for the part of the model that is unique to geology but for which general agreement can be reached within the domain. This paper is presented on behalf of the Interoperability Working Group of the IUGS Commission for Geoscience Information (CGI) - follow web-link for details of the membership.

[Potential for the survey of quality indicators based on a national emergency department registry : A systematic literature search].

PubMed

Hörster, A C; Kulla, M; Brammen, D; Lefering, R

2018-06-01

Emergency department processes are often key for successful treatment. Therefore, collection of quality indicators is demanded. A basis for the collection is systematic, electronic documentation. The development of paper-based documentation into an electronic and interoperable national emergency registry is-besides the establishment of quality management for emergency departments-a target of the AKTIN project. The objective of this research is identification of internationally applied quality indicators. For the investigation of the current status of quality management in emergency departments based on quality indicators, a systematic literature search of the database PubMed, the Cochrane Library and the internet was performed. Of the 170 internationally applied quality indicators, 25 with at least two references are identified. A total of 10 quality indicators are ascertainable by the data set. An enlargement of the data set will enable the collection of seven further quality indicators. The implementation of data of care behind the emergency processes will provide eight additional quality indicators. This work was able to show that the potential of a national emergency registry for the establishment of quality indicators corresponds with the international systems taken into consideration and could provide a comparable collection of quality indicators.

A development framework for semantically interoperable health information systems.

PubMed

Lopez, Diego M; Blobel, Bernd G M E

2009-02-01

Semantic interoperability is a basic challenge to be met for new generations of distributed, communicating and co-operating health information systems (HIS) enabling shared care and e-Health. Analysis, design, implementation and maintenance of such systems and intrinsic architectures have to follow a unified development methodology. The Generic Component Model (GCM) is used as a framework for modeling any system to evaluate and harmonize state of the art architecture development approaches and standards for health information systems as well as to derive a coherent architecture development framework for sustainable, semantically interoperable HIS and their components. The proposed methodology is based on the Rational Unified Process (RUP), taking advantage of its flexibility to be configured for integrating other architectural approaches such as Service-Oriented Architecture (SOA), Model-Driven Architecture (MDA), ISO 10746, and HL7 Development Framework (HDF). Existing architectural approaches have been analyzed, compared and finally harmonized towards an architecture development framework for advanced health information systems. Starting with the requirements for semantic interoperability derived from paradigm changes for health information systems, and supported in formal software process engineering methods, an appropriate development framework for semantically interoperable HIS has been provided. The usability of the framework has been exemplified in a public health scenario.

A SOA-Based Platform to Support Clinical Data Sharing.

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the "Interoperable" Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the "Interoperable" Tier, the current solution actually covers the "Connected" Tier, due to local hospital policy restrictions.

Tool and data interoperability in the SSE system

NASA Technical Reports Server (NTRS)

Shotton, Chuck

1988-01-01

Information is given in viewgraph form on tool and data interoperability in the Software Support Environment (SSE). Information is given on industry problems, SSE system interoperability issues, SSE solutions to tool and data interoperability, and attainment of heterogeneous tool/data interoperability.

Exchanging the Context between OGC Geospatial Web clients and GIS applications using Atom

NASA Astrophysics Data System (ADS)

Maso, Joan; Díaz, Paula; Riverola, Anna; Pons, Xavier

2013-04-01

Currently, the discovery and sharing of geospatial information over the web still presents difficulties. News distribution through website content was simplified by the use of Really Simple Syndication (RSS) and Atom syndication formats. This communication exposes an extension of Atom to redistribute references to geospatial information in a Spatial Data Infrastructure distributed environment. A geospatial client can save the status of an application that involves several OGC services of different kind and direct data and share this status with other users that need the same information and use different client vendor products in an interoperable way. The extensibility of the Atom format was essential to define a format that could be used in RSS enabled web browser, Mass Market map viewers and emerging geospatial enable integrated clients that support Open Geospatial Consortium (OGC) services. Since OWS Context has been designed as an Atom extension, it is possible to see the document in common places where Atom documents are valid. Internet web browsers are able to present the document as a list of items with title, abstract, time, description and downloading features. OWS Context uses GeoRSS so that, the document can be to be interpreted by both Google maps and Bing Maps as items that have the extent represented in a dynamic map. Another way to explode a OWS Context is to develop an XSLT to transform the Atom feed into an HTML5 document that shows the exact status of the client view window that saved the context document. To accomplish so, we use the width and height of the client window, and the extent of the view in world (geographic) coordinates in order to calculate the scale of the map. Then, we can mix elements in world coordinates (such as CF-NetCDF files or GML) with elements in pixel coordinates (such as WMS maps, WMTS tiles and direct SVG content). A smarter map browser application called MiraMon Map Browser is able to write a context document and read it again to recover the context of the previous view or load a context generated by another application. The possibility to store direct links to direct files in OWS Context is particularly interesting for GIS desktop solutions. This communication also presents the development made in the MiraMon desktop GIS solution to include OWS Context. MiraMon software is able to deal either with local files, web services and database connections. As in any other GIS solution, MiraMon team designed its own file (MiraMon Map MMM) for storing and sharing the status of a GIS session. The new OWS Context format is now adopted as an interoperable substitution of the MMM. The extensibility of the format makes it possible to map concepts in the MMM to current OWS Context elements (such as titles, data links, extent, etc) and to generate new elements that are able to include all extra metadata not currently covered by OWS Context. These developments were done in the nine edition of the OpenGIS Web Services Interoperability Experiment (OWS-9) and are demonstrated in this communication.

Software Tools for In-Situ Documentation of Built Heritage

NASA Astrophysics Data System (ADS)

Smars, P.

2013-07-01

The paper presents open source software tools developed by the author to facilitate in-situ documentation of architectural and archæological heritage. The design choices are exposed and related to a general issue in conservation and documentation: taking decisions about a valuable object under threat . The questions of level of objectivity is central to the three steps of this process. It is our belief that in-situ documentation has to be favoured in this demanding context, full of potential discoveries. The very powerful surveying techniques in rapid development nowadays enhance our vision but often tend to bring back a critical part of the documentation process to the office. The software presented facilitate a direct treatment of the data on the site. Emphasis is given to flexibility, interoperability and simplicity. Key features of the software are listed and illustrated with examples (3D model of Gothic vaults, analysis of the shape of a column, deformation of a wall, direct interaction with AutoCAD).

UHF (Ultra High Frequency) Military Satellite Communications Ground Equipment Interoperability.

DTIC Science & Technology

1986-10-06

crisis management requires interoperability between various services. These short-term crises often arise from unforeseen circumstances in which...Scheduler Qualcomm has prepared an interoperability study for the JTC3A (Reference 15) as a TA/CE for USCINCLANT ROC 5-84 requirements. It has defined a...interoperability is fundamental. A number of operational crises have occurred where interoperable communications or the lack of interoperable

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Using archetypes for defining CDA templates.

PubMed

Moner, David; Moreno, Alberto; Maldonado, José A; Robles, Montserrat; Parra, Carlos

2012-01-01

While HL7 CDA is a widely adopted standard for the documentation of clinical information, the archetype approach proposed by CEN/ISO 13606 and openEHR is gaining recognition as a means of describing domain models and medical knowledge. This paper describes our efforts in combining both standards. Using archetypes as an alternative for defining CDA templates permit new possibilities all based on the formal nature of archetypes and their ability to merge into the same artifact medical knowledge and technical requirements for semantic interoperability of electronic health records. We describe the process followed for the normalization of existing legacy data in a hospital environment, from the importation of the HL7 CDA model into an archetype editor, the definition of CDA archetypes and the application of those archetypes to obtain normalized CDA data instances.

Framework for Architecture Trade Study Using MBSE and Performance Simulation

NASA Technical Reports Server (NTRS)

Ryan, Jessica; Sarkani, Shahram; Mazzuchim, Thomas

2012-01-01

Increasing complexity in modern systems as well as cost and schedule constraints require a new paradigm of system engineering to fulfill stakeholder needs. Challenges facing efficient trade studies include poor tool interoperability, lack of simulation coordination (design parameters) and requirements flowdown. A recent trend toward Model Based System Engineering (MBSE) includes flexible architecture definition, program documentation, requirements traceability and system engineering reuse. As a new domain MBSE still lacks governing standards and commonly accepted frameworks. This paper proposes a framework for efficient architecture definition using MBSE in conjunction with Domain Specific simulation to evaluate trade studies. A general framework is provided followed with a specific example including a method for designing a trade study, defining candidate architectures, planning simulations to fulfill requirements and finally a weighted decision analysis to optimize system objectives.

Concepts and Technologies for a Comprehensive Information System for Historical Research and Heritage Documentation

NASA Astrophysics Data System (ADS)

Henze, F.; Magdalinski, N.; Schwarzbach, F.; Schulze, A.; Gerth, Ph.; Schäfer, F.

2013-07-01

Information systems play an important role in historical research as well as in heritage documentation. As part of a joint research project of the German Archaeological Institute, the Brandenburg University of Technology Cottbus and the Dresden University of Applied Sciences a web-based documentation system is currently being developed, which can easily be adapted to the needs of different projects with individual scientific concepts, methods and questions. Based on open source and standardized technologies it will focus on open and well-documented interfaces to ease the dissemination and re-use of its content via web-services and to communicate with desktop applications for further evaluation and analysis. Core of the system is a generic data model that represents a wide range of topics and methods of archaeological work. By the provision of a concerted amount of initial themes and attributes a cross project analysis of research data will be possible. The development of enhanced search and retrieval functionalities will simplify the processing and handling of large heterogeneous data sets. To achieve a high degree of interoperability with existing external data, systems and applications, standardized interfaces will be integrated. The analysis of spatial data shall be possible through the integration of web-based GIS functions. As an extension to this, customized functions for storage, processing and provision of 3D geo data are being developed. As part of the contribution system requirements and concepts will be presented and discussed. A particular focus will be on introducing the generic data model and the derived database schema. The research work on enhanced search and retrieval capabilities will be illustrated by prototypical developments, as well as concepts and first implementations for an integrated 2D/3D Web-GIS.

Photon-HDF5: Open Data Format and Computational Tools for Timestamp-based Single-Molecule Experiments

PubMed Central

Ingargiola, Antonino; Laurence, Ted; Boutelle, Robert; Weiss, Shimon; Michalet, Xavier

2017-01-01

Archival of experimental data in public databases has increasingly become a requirement for most funding agencies and journals. These data-sharing policies have the potential to maximize data reuse, and to enable confirmatory as well as novel studies. However, the lack of standard data formats can severely hinder data reuse. In photon-counting-based single-molecule fluorescence experiments, data is stored in a variety of vendor-specific or even setup-specific (custom) file formats, making data interchange prohibitively laborious, unless the same hardware-software combination is used. Moreover, the number of available techniques and setup configurations make it difficult to find a common standard. To address this problem, we developed Photon-HDF5 (www.photon-hdf5.org), an open data format for timestamp-based single-molecule fluorescence experiments. Building on the solid foundation of HDF5, Photon-HDF5 provides a platform- and language-independent, easy-to-use file format that is self-describing and supports rich metadata. Photon-HDF5 supports different types of measurements by separating raw data (e.g. photon-timestamps, detectors, etc) from measurement metadata. This approach allows representing several measurement types and setup configurations within the same core structure and makes possible extending the format in backward-compatible way. Complementing the format specifications, we provide open source software to create and convert Photon-HDF5 files, together with code examples in multiple languages showing how to read Photon-HDF5 files. Photon-HDF5 allows sharing data in a format suitable for long term archival, avoiding the effort to document custom binary formats and increasing interoperability with different analysis software. We encourage participation of the single-molecule community to extend interoperability and to help defining future versions of Photon-HDF5. PMID:28649160

Photon-HDF5: Open Data Format and Computational Tools for Timestamp-based Single-Molecule Experiments.

PubMed

Ingargiola, Antonino; Laurence, Ted; Boutelle, Robert; Weiss, Shimon; Michalet, Xavier

2016-02-13

Archival of experimental data in public databases has increasingly become a requirement for most funding agencies and journals. These data-sharing policies have the potential to maximize data reuse, and to enable confirmatory as well as novel studies. However, the lack of standard data formats can severely hinder data reuse. In photon-counting-based single-molecule fluorescence experiments, data is stored in a variety of vendor-specific or even setup-specific (custom) file formats, making data interchange prohibitively laborious, unless the same hardware-software combination is used. Moreover, the number of available techniques and setup configurations make it difficult to find a common standard. To address this problem, we developed Photon-HDF5 (www.photon-hdf5.org), an open data format for timestamp-based single-molecule fluorescence experiments. Building on the solid foundation of HDF5, Photon-HDF5 provides a platform- and language-independent, easy-to-use file format that is self-describing and supports rich metadata. Photon-HDF5 supports different types of measurements by separating raw data (e.g. photon-timestamps, detectors, etc) from measurement metadata. This approach allows representing several measurement types and setup configurations within the same core structure and makes possible extending the format in backward-compatible way. Complementing the format specifications, we provide open source software to create and convert Photon-HDF5 files, together with code examples in multiple languages showing how to read Photon-HDF5 files. Photon-HDF5 allows sharing data in a format suitable for long term archival, avoiding the effort to document custom binary formats and increasing interoperability with different analysis software. We encourage participation of the single-molecule community to extend interoperability and to help defining future versions of Photon-HDF5.

Photon-HDF5: open data format and computational tools for timestamp-based single-molecule experiments

NASA Astrophysics Data System (ADS)

Ingargiola, Antonino; Laurence, Ted; Boutelle, Robert; Weiss, Shimon; Michalet, Xavier

2016-02-01

Archival of experimental data in public databases has increasingly become a requirement for most funding agencies and journals. These data-sharing policies have the potential to maximize data reuse, and to enable confirmatory as well as novel studies. However, the lack of standard data formats can severely hinder data reuse. In photon-counting-based single-molecule fluorescence experiments, data is stored in a variety of vendor-specific or even setup-specific (custom) file formats, making data interchange prohibitively laborious, unless the same hardware-software combination is used. Moreover, the number of available techniques and setup configurations make it difficult to find a common standard. To address this problem, we developed Photon-HDF5 (www.photon-hdf5.org), an open data format for timestamp-based single-molecule fluorescence experiments. Building on the solid foundation of HDF5, Photon- HDF5 provides a platform- and language-independent, easy-to-use file format that is self-describing and supports rich metadata. Photon-HDF5 supports different types of measurements by separating raw data (e.g. photon-timestamps, detectors, etc) from measurement metadata. This approach allows representing several measurement types and setup configurations within the same core structure and makes possible extending the format in backward-compatible way. Complementing the format specifications, we provide open source software to create and convert Photon- HDF5 files, together with code examples in multiple languages showing how to read Photon-HDF5 files. Photon- HDF5 allows sharing data in a format suitable for long term archival, avoiding the effort to document custom binary formats and increasing interoperability with different analysis software. We encourage participation of the single-molecule community to extend interoperability and to help defining future versions of Photon-HDF5.

Interoperability of medical device information and the clinical applications: an HL7 RMIM based on the ISO/IEEE 11073 DIM.

PubMed

Yuksel, Mustafa; Dogac, Asuman

2011-07-01

Medical devices are essential to the practice of modern healthcare services. Their benefits will increase if clinical software applications can seamlessly acquire the medical device data. The need to represent medical device observations in a format that can be consumable by clinical applications has already been recognized by the industry. Yet, the solutions proposed involve bilateral mappings from the ISO/IEEE 11073 Domain Information Model (DIM) to specific message or document standards. Considering that there are many different types of clinical applications such as the electronic health record and the personal health record systems, the clinical workflows, and the clinical decision support systems each conforming to different standard interfaces, detailing a mapping mechanism for every one of them introduces significant work and, thus, limits the potential health benefits of medical devices. In this paper, to facilitate the interoperability of clinical applications and the medical device data, we use the ISO/IEEE 11073 DIM to derive an HL7 v3 Refined Message Information Model (RMIM) of the medical device domain from the HL7 v3 Reference Information Mode (RIM). This makes it possible to trace the medical device data back to a standard common denominator, that is, HL7 v3 RIM from which all the other medical domains under HL7 v3 are derived. Hence, once the medical device data are obtained in the RMIM format, it can easily be transformed into HL7-based standard interfaces through XML transformations because these interfaces all have their building blocks from the same RIM. To demonstrate this, we provide the mappings from the developed RMIM to some of the widely used HL7 v3-based standard interfaces.

The interoperability force in the ERP field

NASA Astrophysics Data System (ADS)

Boza, Andrés; Cuenca, Llanos; Poler, Raúl; Michaelides, Zenon

2015-04-01

Enterprise resource planning (ERP) systems participate in interoperability projects and this participation sometimes leads to new proposals for the ERP field. The aim of this paper is to identify the role that interoperability plays in the evolution of ERP systems. To go about this, ERP systems have been first identified within interoperability frameworks. Second, the initiatives in the ERP field driven by interoperability requirements have been identified from two perspectives: technological and business. The ERP field is evolving from classical ERP as information system integrators to a new generation of fully interoperable ERP. Interoperability is changing the way of running business, and ERP systems are changing to adapt to the current stream of interoperability.

WellnessRules: A Web 3.0 Case Study in RuleML-Based Prolog-N3 Profile Interoperation

NASA Astrophysics Data System (ADS)

Boley, Harold; Osmun, Taylor Michael; Craig, Benjamin Larry

An interoperation study, WellnessRules, is described, where rules about wellness opportunities are created by participants in rule languages such as Prolog and N3, and translated within a wellness community using RuleML/XML. The wellness rules are centered around participants, as profiles, encoding knowledge about their activities conditional on the season, the time-of-day, the weather, etc. This distributed knowledge base extends FOAF profiles with a vocabulary and rules about wellness group networking. The communication between participants is organized through Rule Responder, permitting wellness-profile translation and distributed querying across engines. WellnessRules interoperates between rules and queries in the relational (Datalog) paradigm of the pure-Prolog subset of POSL and in the frame (F-logic) paradigm of N3. An evaluation of Rule Responder instantiated for WellnessRules revealed acceptable Web response times.

A Shovel-Ready Solution to Fill the Nursing Data Gap in the Interdisciplinary Clinical Picture.

PubMed

Keenan, Gail M; Lopez, Karen Dunn; Sousa, Vanessa E C; Stifter, Janet; Macieira, Tamara G R; Boyd, Andrew D; Yao, Yingwei; Herdman, T Heather; Moorhead, Sue; McDaniel, Anna; Wilkie, Diana J

2018-01-01

To critically evaluate 2014 American Academy of Nursing (AAN) call-to-action plan for generating interoperable nursing data. Healthcare literature. AAN's plan will not generate the nursing data needed to participate in big data science initiatives in the short term because Logical Observation Identifiers Names and Codes and Systematized Nomenclature of Medicine - Clinical Terms are not yet ripe for generating interoperable data. Well-tested viable alternatives exist. Authors present recommendations for revisions to AAN's plan and an evidence-based alternative to generating interoperable nursing data in the near term. These revisions can ultimately lead to the proposed terminology goals of the AAN's plan in the long term. © 2017 NANDA International, Inc.

Inter-operator Reliability of Magnetic Resonance Image-Based Computational Fluid Dynamics Prediction of Cerebrospinal Fluid Motion in the Cervical Spine.

PubMed

Martin, Bryn A; Yiallourou, Theresia I; Pahlavian, Soroush Heidari; Thyagaraj, Suraj; Bunck, Alexander C; Loth, Francis; Sheffer, Daniel B; Kröger, Jan Robert; Stergiopulos, Nikolaos

2016-05-01

For the first time, inter-operator dependence of MRI based computational fluid dynamics (CFD) modeling of cerebrospinal fluid (CSF) in the cervical spinal subarachnoid space (SSS) is evaluated. In vivo MRI flow measurements and anatomy MRI images were obtained at the cervico-medullary junction of a healthy subject and a Chiari I malformation patient. 3D anatomies of the SSS were reconstructed by manual segmentation by four independent operators for both cases. CFD results were compared at nine axial locations along the SSS in terms of hydrodynamic and geometric parameters. Intraclass correlation (ICC) assessed the inter-operator agreement for each parameter over the axial locations and coefficient of variance (CV) compared the percentage of variance for each parameter between the operators. Greater operator dependence was found for the patient (0.19 < ICC < 0.99) near the craniovertebral junction compared to the healthy subject (ICC > 0.78). For the healthy subject, hydraulic diameter and Womersley number had the least variance (CV = ~2%). For the patient, peak diastolic velocity and Reynolds number had the smallest variance (CV = ~3%). These results show a high degree of inter-operator reliability for MRI-based CFD simulations of CSF flow in the cervical spine for healthy subjects and a lower degree of reliability for patients with Type I Chiari malformation.

Inter-Operator Dependence of Magnetic Resonance Image-Based Computational Fluid Dynamics Prediction of Cerebrospinal Fluid Motion in the Cervical Spine

PubMed Central

Martin, Bryn A.; Yiallourou, Theresia I.; Pahlavian, Soroush Heidari; Thyagaraj, Suraj; Bunck, Alexander C.; Loth, Francis; Sheffer, Daniel B.; Kröger, Jan Robert; Stergiopulos, Nikolaos

2015-01-01

For the first time, inter-operator dependence of MRI based computational fluid dynamics (CFD) modeling of cerebrospinal fluid (CSF) in the cervical spinal subarachnoid space (SSS) is evaluated. In vivo MRI flow measurements and anatomy MRI images were obtained at the cervico-medullary junction of a healthy subject and a Chiari I malformation patient. 3D anatomies of the SSS were reconstructed by manual segmentation by four independent operators for both cases. CFD results were compared at nine axial locations along the SSS in terms of hydrodynamic and geometric parameters. Intraclass correlation (ICC) assessed the inter-operator agreement for each parameter over the axial locations and coefficient of variance (CV) compared the percentage of variance for each parameter between the operators. Greater operator dependence was found for the patient (0.19 0.78). For the healthy subject, hydraulic diameter and Womersley number had the least variance (CV= ~2%). For the patient, peak diastolic velocity and Reynolds number had the smallest variance (CV= ~3%). These results show a high degree of inter-operator reliability for MRI-based CFD simulations of CSF flow in the cervical spine for healthy subjects and a lower degree of reliability for patients with Type I Chiari malformation. PMID:26446009

CCSDS Spacecraft Monitor and Control Mission Operations Interoperability Prototype

NASA Technical Reports Server (NTRS)

Lucord, Steve; Martinez, Lindolfo

2009-01-01

We are entering a new era in space exploration. Reduced operating budgets require innovative solutions to leverage existing systems to implement the capabilities of future missions. Custom solutions to fulfill mission objectives are no longer viable. Can NASA adopt international standards to reduce costs and increase interoperability with other space agencies? Can legacy systems be leveraged in a service oriented architecture (SOA) to further reduce operations costs? The Operations Technology Facility (OTF) at the Johnson Space Center (JSC) is collaborating with Deutsches Zentrum fur Luft- und Raumfahrt (DLR) to answer these very questions. The Mission Operations and Information Management Services Area (MOIMS) Spacecraft Monitor and Control (SM&C) Working Group within the Consultative Committee for Space Data Systems (CCSDS) is developing the Mission Operations standards to address this problem space. The set of proposed standards presents a service oriented architecture to increase the level of interoperability among space agencies. The OTF and DLR are developing independent implementations of the standards as part of an interoperability prototype. This prototype will address three key components: validation of the SM&C Mission Operations protocol, exploration of the Object Management Group (OMG) Data Distribution Service (DDS), and the incorporation of legacy systems in a SOA. The OTF will implement the service providers described in the SM&C Mission Operation standards to create a portal for interaction with a spacecraft simulator. DLR will implement the service consumers to perform the monitor and control of the spacecraft. The specifications insulate the applications from the underlying transport layer. We will gain experience with a DDS transport layer as we delegate responsibility to the middleware and explore transport bridges to connect disparate middleware products. A SOA facilitates the reuse of software components. The prototype will leverage the capabilities of existing legacy systems. Various custom applications and middleware solutions will be combined into one system providing the illusion of a set of homogenous services. This paper will document our journey as we implement the interoperability prototype. The team consists of software engineers with experience on the current command, telemetry and messaging systems that support the International Space Station (ISS) and Space Shuttle programs. Emphasis will be on the objectives, results and potential cost saving benefits.

Enabling Interoperable and Selective Data Sharing among Social Networking Sites

NASA Astrophysics Data System (ADS)

Shin, Dongwan; Lopes, Rodrigo

With the widespread use of social networking (SN) sites and even introduction of a social component in non-social oriented services, there is a growing concern over user privacy in general, how to handle and share user profiles across SN sites in particular. Although there have been several proprietary or open source-based approaches to unifying the creation of third party applications, the availability and retrieval of user profile information are still limited to the site where the third party application is run, mostly devoid of the support for data interoperability. In this paper we propose an approach to enabling interopearable and selective data sharing among SN sites. To support selective data sharing, we discuss an authenticated dictionary (ADT)-based credential which enables a user to share only a subset of her information certified by external SN sites with applications running on an SN site. For interoperable data sharing, we propose an extension to the OpenSocial API so that it can provide an open source-based framework for allowing the ADT-based credential to be used seamlessly among different SN sites.

Ensuring Interoperability between UAS Detect-and-Avoid and Manned Aircraft Collision Avoidance

NASA Technical Reports Server (NTRS)

Thipphavong, David; Cone, Andrew; Lee, Seung Man; Santiago, Confesor

2017-01-01

The UAS community in the United States has identified the need for a collision avoidance region in which UAS Detect-and-Avoid (DAA) vertical guidance is restricted to preclude interoperability issues with manned aircraft collision avoidance system vertical resolution advisories (RAs). This paper documents the process by which the collision avoidance region was defined. Three candidate definitions were evaluated on 1.3 million simulated pairwise encounters between UAS and manned aircraft covering a wide range of horizontal and vertical closure rates, angles, and miss distances. They were evaluated with regard to UAS DAA interoperability with manned aircraft collision avoidance systems in terms of: 1) the primary objective of restricting DAA vertical guidance before RAs when the aircraft are close, and 2) the secondary objective of avoiding unnecessary restrictions of DAA vertical guidance at a DAA alert when the aircraft are further apart. The collision avoidance region definition that fully achieves the primary objective and best achieves the secondary objective was recommended to and accepted by the UAS community in the United States. By this definition, UAS and manned aircraft are in the collision avoidance region--during which DAA vertical guidance is restricted--when the time to closest point of approach is less than 50 seconds and either the time to co-altitude is less than 50 seconds or the current vertical separation is less than 800 feet.

Poor interoperability of the Adams-Harbertson method for analysis of anthocyanins: comparison with AOAC pH differential method.

PubMed

Brooks, Larry M; Kuhlman, Benjamin J; McKesson, Doug W; McCloskey, Leo

2013-01-01

The poor interoperability of anthocyanin glycosides measurements by two pH differential methods is documented. Adams-Harbertson, which was proposed for commercial winemaking, was compared to AOAC Official Method 2005.02 for wine. California bottled wines (Pinot Noir, Merlot, and Cabernet Sauvignon) were assayed in a collaborative study (n=105), which found mean precision of Adams-Harbertson winery versus reference measurements to be 77 +/- 20%. Maximum error is expected to be 48% for Pinot Noir, 42% for Merlot, and 34% for Cabernet Sauvignon from reproducibility RSD. Range of measurements was actually 30 to 91% for Pinot Noir. An interoperability study (n=30) found Adams-Harbertson produces measurements that are nominally 150% of the AOAC pH differential method. Large analytical chemistry differences are: AOAC method uses Beer-Lambert equation and measures absorbance at pH 1.0 and 4.5, proposed a priori by Flueki and Francis; whereas Adams-Harbertson uses "universal" standard curve and measures absorbance ad hoc at pH 1.8 and 4.9 to reduce the effects of so-called co-pigmentation. Errors relative to AOAC are produced by Adams-Harbertson standard curve over Beer-Lambert and pH 1.8 over pH 1.0. The study recommends using AOAC Official Method 2005.02 for analysis of wine anthocyanin glycosides.

Ensuring Interoperability Between Unmanned Aircraft Detect-and-Avoid and Manned Aircraft Collision Avoidance

NASA Technical Reports Server (NTRS)

Thipphavong, David; Cone, Andrew; Lee, Seungman

2017-01-01

The Unmanned Aircraft Systems (UAS) community in the United States has identified the need for a collision avoidance region in which UAS Detect-and-Avoid (DAA) vertical guidance is restricted to preclude interoperability issues with manned aircraft collision avoidance system vertical resolution advisories (RAs). This paper documents the process by which the collision avoidance region was defined. Three candidate definitions were evaluated on 1.3 million simulated pairwise encounters between UAS and manned aircraft covering a wide range of horizontal and vertical closure rates, angles, and miss distances. Each definition was evaluated with regard to UAS DAA interoperability with manned aircraft collision avoidance in terms of how well it achieved: 1) the primary objective of restricting DAA vertical guidance prior to RAs when the aircraft are close, and 2) the secondary objective of avoiding unnecessary restrictions of DAA vertical guidance at DAA alerts when the aircraft are further apart. The collision avoidance region definition that fully achieves the primary objective and best achieves the secondary objective was recommended to and accepted by the UAS community in the United States. By this definition, UAS and manned aircraft are in the collision avoidance region where DAA vertical guidance is restricted when the time to closest point of approach (CPA) is less than 50 seconds and either the time to co-altitude is less than 50 seconds or the current vertical separation is less than 800 feet.

The PSML format and library for norm-conserving pseudopotential data curation and interoperability

NASA Astrophysics Data System (ADS)

García, Alberto; Verstraete, Matthieu J.; Pouillon, Yann; Junquera, Javier

2018-06-01

Norm-conserving pseudopotentials are used by a significant number of electronic-structure packages, but the practical differences among codes in the handling of the associated data hinder their interoperability and make it difficult to compare their results. At the same time, existing formats lack provenance data, which makes it difficult to track and document computational workflows. To address these problems, we first propose a file format (PSML) that maps the basic concepts of the norm-conserving pseudopotential domain in a flexible form and supports the inclusion of provenance information and other important metadata. Second, we provide a software library (libPSML) that can be used by electronic structure codes to transparently extract the information in the file and adapt it to their own data structures, or to create converters for other formats. Support for the new file format has been already implemented in several pseudopotential generator programs (including ATOM and ONCVPSP), and the library has been linked with SIESTA and ABINIT, allowing them to work with the same pseudopotential operator (with the same local part and fully non-local projectors) thus easing the comparison of their results for the structural and electronic properties, as shown for several example systems. This methodology can be easily transferred to any other package that uses norm-conserving pseudopotentials, and offers a proof-of-concept for a general approach to interoperability.

Sensor Web Interoperability Testbed Results Incorporating Earth Observation Satellites

NASA Technical Reports Server (NTRS)

Frye, Stuart; Mandl, Daniel J.; Alameh, Nadine; Bambacus, Myra; Cappelaere, Pat; Falke, Stefan; Derezinski, Linda; Zhao, Piesheng

2007-01-01

This paper describes an Earth Observation Sensor Web scenario based on the Open Geospatial Consortium s Sensor Web Enablement and Web Services interoperability standards. The scenario demonstrates the application of standards in describing, discovering, accessing and tasking satellites and groundbased sensor installations in a sequence of analysis activities that deliver information required by decision makers in response to national, regional or local emergencies.

Distributed GIS Systems, Open Specifications and Interoperability: How do They Relate to the Sustainable Management of Natural Resources?

Treesearch

Rafael Moreno-Sanchez

2006-01-01

The aim of this is paper is to provide a conceptual framework for the session: “The role of web-based Geographic Information Systems in supporting sustainable management.” The concepts of sustainability, sustainable forest management, Web Services, Distributed Geographic Information Systems, interoperability, Open Specifications, and Open Source Software are defined...

KAPSE Interface Team (KIT) Public Report. Volume 7

DTIC Science & Technology

1989-10-01

e E&V STATUS - Ray Szymanski (Wriaht-Patterson) was announced as the new chairman of the Evaluation and Validation Team. Two RFP’s are coming, for...are language interoperability problems (implementations using multiple languages where interoperability problems are experienced such as transferring...visitors were introduced. Ray Szymanski , the Evaluation & Validation Team Leader, is replacing Jinny Castor from Wright-Patterson Air Force Base. Dr

Maturity model for enterprise interoperability

NASA Astrophysics Data System (ADS)

Guédria, Wided; Naudet, Yannick; Chen, David

2015-01-01

Historically, progress occurs when entities communicate, share information and together create something that no one individually could do alone. Moving beyond people to machines and systems, interoperability is becoming a key factor of success in all domains. In particular, interoperability has become a challenge for enterprises, to exploit market opportunities, to meet their own objectives of cooperation or simply to survive in a growing competitive world where the networked enterprise is becoming a standard. Within this context, many research works have been conducted over the past few years and enterprise interoperability has become an important area of research, ensuring the competitiveness and growth of European enterprises. Among others, enterprises have to control their interoperability strategy and enhance their ability to interoperate. This is the purpose of the interoperability assessment. Assessing interoperability maturity allows a company to know its strengths and weaknesses in terms of interoperability with its current and potential partners, and to prioritise actions for improvement. The objective of this paper is to define a maturity model for enterprise interoperability that takes into account existing maturity models while extending the coverage of the interoperability domain. The assessment methodology is also presented. Both are demonstrated with a real case study.

Geoscience Information Network (USGIN) Solutions for Interoperable Open Data Access Requirements

NASA Astrophysics Data System (ADS)

Allison, M. L.; Richard, S. M.; Patten, K.

2014-12-01

The geosciences are leading development of free, interoperable open access to data. US Geoscience Information Network (USGIN) is a freely available data integration framework, jointly developed by the USGS and the Association of American State Geologists (AASG), in compliance with international standards and protocols to provide easy discovery, access, and interoperability for geoscience data. USGIN standards include the geologic exchange language 'GeoSciML' (v 3.2 which enables instant interoperability of geologic formation data) which is also the base standard used by the 117-nation OneGeology consortium. The USGIN deployment of NGDS serves as a continent-scale operational demonstration of the expanded OneGeology vision to provide access to all geoscience data worldwide. USGIN is developed to accommodate a variety of applications; for example, the International Renewable Energy Agency streams data live to the Global Atlas of Renewable Energy. Alternatively, users without robust data sharing systems can download and implement a free software packet, "GINstack" to easily deploy web services for exposing data online for discovery and access. The White House Open Data Access Initiative requires all federally funded research projects and federal agencies to make their data publicly accessible in an open source, interoperable format, with metadata. USGIN currently incorporates all aspects of the Initiative as it emphasizes interoperability. The system is successfully deployed as the National Geothermal Data System (NGDS), officially launched at the White House Energy Datapalooza in May, 2014. The USGIN Foundation has been established to ensure this technology continues to be accessible and available.

OGC and Grid Interoperability in enviroGRIDS Project

NASA Astrophysics Data System (ADS)

Gorgan, Dorian; Rodila, Denisa; Bacu, Victor; Giuliani, Gregory; Ray, Nicolas

2010-05-01

EnviroGRIDS (Black Sea Catchment Observation and Assessment System supporting Sustainable Development) [1] is a 4-years FP7 Project aiming to address the subjects of ecologically unsustainable development and inadequate resource management. The project develops a Spatial Data Infrastructure of the Black Sea Catchment region. The geospatial technologies offer very specialized functionality for Earth Science oriented applications as well as the Grid oriented technology that is able to support distributed and parallel processing. One challenge of the enviroGRIDS project is the interoperability between geospatial and Grid infrastructures by providing the basic and the extended features of the both technologies. The geospatial interoperability technology has been promoted as a way of dealing with large volumes of geospatial data in distributed environments through the development of interoperable Web service specifications proposed by the Open Geospatial Consortium (OGC), with applications spread across multiple fields but especially in Earth observation research. Due to the huge volumes of data available in the geospatial domain and the additional introduced issues (data management, secure data transfer, data distribution and data computation), the need for an infrastructure capable to manage all those problems becomes an important aspect. The Grid promotes and facilitates the secure interoperations of geospatial heterogeneous distributed data within a distributed environment, the creation and management of large distributed computational jobs and assures a security level for communication and transfer of messages based on certificates. This presentation analysis and discusses the most significant use cases for enabling the OGC Web services interoperability with the Grid environment and focuses on the description and implementation of the most promising one. In these use cases we give a special attention to issues such as: the relations between computational grid and the OGC Web service protocols, the advantages offered by the Grid technology - such as providing a secure interoperability between the distributed geospatial resource -and the issues introduced by the integration of distributed geospatial data in a secure environment: data and service discovery, management, access and computation. enviroGRIDS project proposes a new architecture which allows a flexible and scalable approach for integrating the geospatial domain represented by the OGC Web services with the Grid domain represented by the gLite middleware. The parallelism offered by the Grid technology is discussed and explored at the data level, management level and computation level. The analysis is carried out for OGC Web service interoperability in general but specific details are emphasized for Web Map Service (WMS), Web Feature Service (WFS), Web Coverage Service (WCS), Web Processing Service (WPS) and Catalog Service for Web (CSW). Issues regarding the mapping and the interoperability between the OGC and the Grid standards and protocols are analyzed as they are the base in solving the communication problems between the two environments: grid and geospatial. The presetation mainly highlights how the Grid environment and Grid applications capabilities can be extended and utilized in geospatial interoperability. Interoperability between geospatial and Grid infrastructures provides features such as the specific geospatial complex functionality and the high power computation and security of the Grid, high spatial model resolution and geographical area covering, flexible combination and interoperability of the geographical models. According with the Service Oriented Architecture concepts and requirements of interoperability between geospatial and Grid infrastructures each of the main functionality is visible from enviroGRIDS Portal and consequently, by the end user applications such as Decision Maker/Citizen oriented Applications. The enviroGRIDS portal is the single way of the user to get into the system and the portal faces a unique style of the graphical user interface. Main reference for further information: [1] enviroGRIDS Project, http://www.envirogrids.net/

Providing Enterprise Information Services for Multinational Interoperability - The EIM Approach

DTIC Science & Technology

2005-06-01

Federated Search • Document Processing and Archiving • Workflow processing References 1. Perspective on Multinational Information Sharing, Cheryl...layer, with a primary focus on the Application Layers. App Layer Focus Areas Enterprise Content Mgt, Workflow, Business Processes, Federated ... Search Integration Layer – EAI Components Nation 1 Nation 2 Nation 3 … Nation N Silo 1 Silo 2 Silo 3 S ilo N Silo 1 Silo 1 Silo 2 Silo 2 Silo 3 Silo 3 S

Simplifying HL7 Version 3 messages.

PubMed

Worden, Robert; Scott, Philip

2011-01-01

HL7 Version 3 offers a semantically robust method for healthcare interoperability but has been criticized as overly complex to implement. This paper reviews initiatives to simplify HL7 Version 3 messaging and presents a novel approach based on semantic mapping. Based on user-defined definitions, precise transforms between simple and full messages are automatically generated. Systems can be interfaced with the simple messages and achieve interoperability with full Version 3 messages through the transforms. This reduces the costs of HL7 interfacing and will encourage better uptake of HL7 Version 3 and CDA.

An Interoperability Consideration in Selecting Domain Parameters for Elliptic Curve Cryptography

NASA Technical Reports Server (NTRS)

Ivancic, Will (Technical Monitor); Eddy, Wesley M.

2005-01-01

Elliptic curve cryptography (ECC) will be an important technology for electronic privacy and authentication in the near future. There are many published specifications for elliptic curve cryptosystems, most of which contain detailed descriptions of the process for the selection of domain parameters. Selecting strong domain parameters ensures that the cryptosystem is robust to attacks. Due to a limitation in several published algorithms for doubling points on elliptic curves, some ECC implementations may produce incorrect, inconsistent, and incompatible results if domain parameters are not carefully chosen under a criterion that we describe. Few documents specify the addition or doubling of points in such a manner as to avoid this problematic situation. The safety criterion we present is not listed in any ECC specification we are aware of, although several other guidelines for domain selection are discussed in the literature. We provide a simple example of how a set of domain parameters not meeting this criterion can produce catastrophic results, and outline a simple means of testing curve parameters for interoperable safety over doubling.

Smart Grid Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Craig; Carroll, Paul; Bell, Abigail

The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives,more » to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and posted for universal access at www.nreca.coop/smartgrid. This research is available for widespread distribution to both cooperative members and non-members. These reports are listed in Table 1.2. Interoperability: The deliverable in this area was the advancement of the MultiSpeak™ interoperability standard from version 4.0 to version 5.0, and improvement in the MultiSpeak™ documentation to include more than 100 use cases. This deliverable substantially expanded the scope and usability of MultiSpeak, ™ the most widely deployed utility interoperability standard, now in use by more than 900 utilities. MultiSpeak™ documentation can be accessed only at www.multispeak.org. Cyber Security: NRECA’s starting point was to develop cyber security tools that incorporated succinct guidance on best practices. The deliverables were: cyber security extensions to MultiSpeak,™ which allow more security message exchanges; a Guide to Developing a Cyber Security and Risk Mitigation Plan; a Cyber Security Risk Mitigation Checklist; a Cyber Security Plan Template that co-ops can use to create their own cyber security plans; and Security Questions for Smart Grid Vendors.« less

A step-by-step methodology for enterprise interoperability projects

NASA Astrophysics Data System (ADS)

Chalmeta, Ricardo; Pazos, Verónica

2015-05-01

Enterprise interoperability is one of the key factors for enhancing enterprise competitiveness. Achieving enterprise interoperability is an extremely complex process which involves different technological, human and organisational elements. In this paper we present a framework to help enterprise interoperability. The framework has been developed taking into account the three domains of interoperability: Enterprise Modelling, Architecture and Platform and Ontologies. The main novelty of the framework in comparison to existing ones is that it includes a step-by-step methodology that explains how to carry out an enterprise interoperability project taking into account different interoperability views, like business, process, human resources, technology, knowledge and semantics.

An integrative solution for managing, tracing and citing sensor-related information

NASA Astrophysics Data System (ADS)

Koppe, Roland; Gerchow, Peter; Macario, Ana; Schewe, Ingo; Rehmcke, Steven; Düde, Tobias

2017-04-01

In a data-driven scientific world, the need to capture information on sensors used in the data acquisition process has become increasingly important. Following the recommendations of the Open Geospatial Consortium (OGC), we started by adopting the SensorML standard for describing platforms, devices and sensors. However, it soon became obvious to us that understanding, implementing and filling such standards costs significant effort and cannot be expected from every scientist individually. So we developed a web-based sensor management solution (https://sensor.awi.de) for describing platforms, devices and sensors as hierarchy of systems which supports tracing changes to a system whereas hiding complexity. Each platform contains devices where each device can have sensors associated with specific identifiers, contacts, events, related online resources (e.g. manufacturer factsheets, calibration documentation, data processing documentation), sensor output parameters and geo-location. In order to better understand and address real world requirements, we have closely interacted with field-going scientists in the context of the key national infrastructure project "FRontiers in Arctic marine Monitoring ocean observatory" (FRAM) during the software development. We learned that not only the lineage of observations is crucial for scientists but also alert services using value ranges, flexible output formats and information on data providers (e.g. FTP sources) for example. Mostly important, persistent and citable versions of sensor descriptions are required for traceability and reproducibility allowing seamless integration with existing information systems, e.g. PANGAEA. Within the context of the EU-funded Ocean Data Interoperability Platform project (ODIP II) and in cooperation with 52north we are proving near real-time data via Sensor Observation Services (SOS) along with sensor descriptions based on our sensor management solution. ODIP II also aims to develop a harmonized SensorML profile for the marine community which we will be adopting in our solution as soon as available. In this presentation we will show our sensor management solution which is embedded in our data flow framework to offer out-of-the-box interoperability with existing information systems and standards. In addition, we will present real world examples and challenges related to the description and traceability of sensor metadata.

A common type system for clinical natural language processing

PubMed Central

2013-01-01

Background One challenge in reusing clinical data stored in electronic medical records is that these data are heterogenous. Clinical Natural Language Processing (NLP) plays an important role in transforming information in clinical text to a standard representation that is comparable and interoperable. Information may be processed and shared when a type system specifies the allowable data structures. Therefore, we aim to define a common type system for clinical NLP that enables interoperability between structured and unstructured data generated in different clinical settings. Results We describe a common type system for clinical NLP that has an end target of deep semantics based on Clinical Element Models (CEMs), thus interoperating with structured data and accommodating diverse NLP approaches. The type system has been implemented in UIMA (Unstructured Information Management Architecture) and is fully functional in a popular open-source clinical NLP system, cTAKES (clinical Text Analysis and Knowledge Extraction System) versions 2.0 and later. Conclusions We have created a type system that targets deep semantics, thereby allowing for NLP systems to encapsulate knowledge from text and share it alongside heterogenous clinical data sources. Rather than surface semantics that are typically the end product of NLP algorithms, CEM-based semantics explicitly build in deep clinical semantics as the point of interoperability with more structured data types. PMID:23286462

A common type system for clinical natural language processing.

PubMed

Wu, Stephen T; Kaggal, Vinod C; Dligach, Dmitriy; Masanz, James J; Chen, Pei; Becker, Lee; Chapman, Wendy W; Savova, Guergana K; Liu, Hongfang; Chute, Christopher G

2013-01-03

One challenge in reusing clinical data stored in electronic medical records is that these data are heterogenous. Clinical Natural Language Processing (NLP) plays an important role in transforming information in clinical text to a standard representation that is comparable and interoperable. Information may be processed and shared when a type system specifies the allowable data structures. Therefore, we aim to define a common type system for clinical NLP that enables interoperability between structured and unstructured data generated in different clinical settings. We describe a common type system for clinical NLP that has an end target of deep semantics based on Clinical Element Models (CEMs), thus interoperating with structured data and accommodating diverse NLP approaches. The type system has been implemented in UIMA (Unstructured Information Management Architecture) and is fully functional in a popular open-source clinical NLP system, cTAKES (clinical Text Analysis and Knowledge Extraction System) versions 2.0 and later. We have created a type system that targets deep semantics, thereby allowing for NLP systems to encapsulate knowledge from text and share it alongside heterogenous clinical data sources. Rather than surface semantics that are typically the end product of NLP algorithms, CEM-based semantics explicitly build in deep clinical semantics as the point of interoperability with more structured data types.

Progress in electronic medical record adoption in Canada.

PubMed

2015-12-01

To determine the rate of adoption of electronic medical records (EMRs) by physicians across Canada, provincial incentives, and perceived benefits of and barriers to EMR adoption. Data on EMR adoption in Canada were collected from CINAHL, MEDLINE, PubMed, EMBASE, the Cochrane Library, the Health Council of Canada, Canada Health Infoway, government websites, regional EMR associations, and health professional association websites. After removal of duplicate articles, 236 documents were found matching the original search. After using the filter Canada, 12 documents remained. Additional documents were obtained from each province's EMR website and from the Canada Health Infoway website. Since 2006, Canadian EMR adoption rates have increased from about 20% of practitioners to an estimated 62% of practitioners in 2013, with substantial regional disparities ranging from roughly 40% of physicians in New Brunswick and Quebec to more than 75% of physicians in Alberta. Provincial incentives vary widely but appear to have only a weak relationship with the rate of adoption. Many adopters use only a fraction of their software's available functions. User-cited benefits to adoption include time savings, improved record keeping, heightened patient safety, and confidence in retrieved data when EMRs are used efficiently. Barriers to adoption include financial and time constraints, lack of knowledgeable support personnel, and lack of interoperability with hospital and pharmacy systems. Canadian physicians remain at the stage of EMR adoption. Progression in EMR use requires experienced, knowledgeable technical support during implementation, and financial support for the transcription of patient data from paper to electronic media. The interoperability of EMR offerings for hospitals, pharmacies, and clinics is the rate-limiting factor in achieving a unified EMR solution for Canada.

Designing learning management system interoperability in semantic web

NASA Astrophysics Data System (ADS)

Anistyasari, Y.; Sarno, R.; Rochmawati, N.

2018-01-01

The extensive adoption of learning management system (LMS) has set the focus on the interoperability requirement. Interoperability is the ability of different computer systems, applications or services to communicate, share and exchange data, information, and knowledge in a precise, effective and consistent way. Semantic web technology and the use of ontologies are able to provide the required computational semantics and interoperability for the automation of tasks in LMS. The purpose of this study is to design learning management system interoperability in the semantic web which currently has not been investigated deeply. Moodle is utilized to design the interoperability. Several database tables of Moodle are enhanced and some features are added. The semantic web interoperability is provided by exploited ontology in content materials. The ontology is further utilized as a searching tool to match user’s queries and available courses. It is concluded that LMS interoperability in Semantic Web is possible to be performed.

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

DTIC Science & Technology

2017-10-01

Award Number: W81XWH-09-1-0705 TITLE: “Medical Device Plug-and-Play Interoperability Standards and Technology Leadership” PRINCIPAL INVESTIGATOR...Sept 2016 – 20 Sept 2017 4. TITLE AND SUBTITLE “Medical Device Plug-and-Play Interoperability 5a. CONTRACT NUMBER Standards and Technology ...efficiency through interoperable medical technologies . We played a leadership role on interoperability safety standards (AAMI, AAMI/UL Joint

Standardisation for C2-Simulation Interoperation

DTIC Science & Technology

2015-11-01

la continuité du MSG-048 a permis, grâce notamment à la contribution de la communauté opérationnelle, de consolider le besoin et d’approfondir un...demandes de documents STO, RTO ou AGARD doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des ...disponibilité des rapports de la STO au fur et à mesure de leur publication, vous pouvez consulter notre site Web

Developing a Coalition Battle Management Language to Facilitate Interoperability Between Operation CIS, and Simulations in Support of Training and Mission Rehearsal

DTIC Science & Technology

2005-06-01

virtualisation of distributed computing and data resources such as processing, network bandwidth, and storage capacity, to create a single system...and Simulation (M&S) will be integrated into this heterogeneous SOA. M&S functionality will be available in the form of operational M&S services. One...documents defining net centric warfare, the use of M&S functionality is a common theme. Alberts and Hayes give a good overview on net centric operations

The World Football League Plays Ethnopolis United. The Problems of Asymmetry and Interoperability in Future War

DTIC Science & Technology

1998-04-22

TOM SMITH FACULTY SEMINAR LEADER DR BOB MCDONALD , FACULTY ADVISOR Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden...team, provided the cash to pay the huge costs of 3 salaries and equipment, and enjoyed baskmg m the glory of Its vrctones The fans liked wmners, and...before rt had started The WFL would took the field wrth little spectator support, wlnle fanatical Ethno supporters filled the stadium and crowded the

Testbed for Satellite and Terrestrial Interoperability (TSTI)

NASA Technical Reports Server (NTRS)

Gary, J. Patrick

1998-01-01

Various issues associated with the "Testbed for Satellite and Terrestrial Interoperability (TSTI)" are presented in viewgraph form. Specific topics include: 1) General and specific scientific technical objectives; 2) ACTS experiment No. 118: 622 Mbps network tests between ATDNet and MAGIC via ACTS; 3) ATDNet SONET/ATM gigabit network; 4) Testbed infrastructure, collaborations and end sites in TSTI based evaluations; 5) the Trans-Pacific digital library experiment; and 6) ESDCD on-going network projects.

A loosely coupled framework for terminology controlled distributed EHR search for patient cohort identification in clinical research.

PubMed

Zhao, Lei; Lim Choi Keung, Sarah N; Taweel, Adel; Tyler, Edward; Ogunsina, Ire; Rossiter, James; Delaney, Brendan C; Peterson, Kevin A; Hobbs, F D Richard; Arvanitis, Theodoros N

2012-01-01

Heterogeneous data models and coding schemes for electronic health records present challenges for automated search across distributed data sources. This paper describes a loosely coupled software framework based on the terminology controlled approach to enable the interoperation between the search interface and heterogeneous data sources. Software components interoperate via common terminology service and abstract criteria model so as to promote component reuse and incremental system evolution.

ECHO Services: Foundational Middleware for a Science Cyberinfrastructure

NASA Technical Reports Server (NTRS)

Burnett, Michael

2005-01-01

This viewgraph presentation describes ECHO, an interoperability middleware solution. It uses open, XML-based APIs, and supports net-centric architectures and solutions. ECHO has a set of interoperable registries for both data (metadata) and services, and provides user accounts and a common infrastructure for the registries. It is built upon a layered architecture with extensible infrastructure for supporting community unique protocols. It has been operational since November, 2002 and it available as open source.

Opportunities for Next Generation BML: Semantic C-BML

DTIC Science & Technology

2014-06-01

Simulation Interoperability Workshop, 05S- SIW -007, San Diego, CA. 2005. [11] Schade, Ulrich, Bastian Haarmann, and Michael R. Hieb. "A Grammar for...Language (C-BML) Product Development Group.” Paper 06F- SIW -003. In Proceed-ings of the Fall Simulation Interoperability Workshop. Simulation...process – Based on a specification provided by the C-BML product development group (Blais, Curtis, et al; SISO Fall 2011 SIW ) – My work provides insight

Systems Harmonization and Convergence - the GIGAS Approach

NASA Astrophysics Data System (ADS)

Marchetti, P. G.; Biancalana, A.; Coene, Y.; Uslander, T.

2009-04-01

0.1 Background The GIGAS1 Support Action promotes the coherent and interoperable development of the GMES, INSPIRE and GEOSS initiatives through their concerted adoption of standards, protocols, and open architectures. 0.2 Preparing for Coordinated Data Access The GMES Coordinated Data Access System is under design and implementation2. This objective has motivated the definition of the interoperability standards between the contributing missions. The following elements have been addressed with associated papers submitted to OGC: The EO Product Metadata has been based on the OGC Geographic Markup Language, addressing sensor characteristics for optical, radar and atmospheric products. Collection and service discovery: an ISO extension package for CSW ebRim has been proposed. Catalogue Service (CSW): an Earth Observation extension package of the CSW ebRim has been proposed. Feasibility Analysis and Order: an Order interface control document and an Earth Observation profile of the Sensor Planning Service have been proposed. Online Data Access: an Earth Observation profile of the Web Map Services (WMS) for visualization and evaluation purposes has been proposed. Identity (user) management: the objective in the long term is to allow for a single sign-on to the Coordinated Data Access system by users registered in the various Earth Observation ground segments by providing a federated identity across participating ground segments, exploiting OASIS standards. 0.3 The GIGAS proposed harmonization approach The approach proposed by GIGAS is based on three elements: Technology watch Comparative analysis Shaping of initiatives and standards This paper concentrates on the methodology for technology watch and comparative analysis. The complexity of the GIGAS scenario involving huge systems (i.e. GEOSS, INSPIRE, GMES etc.) entails the interaction with different heterogeneous partners, each with a specific competence, expertise and know-how. 0.3.1 Technology watch The methodology proposed is based on an RM-ODP based study supported by interoperability use cases and scenarios used to derive requirements. GIGAS will monitor the INSPIRE, GMES and GEOSS evolution and analyze the requirements, the standards, the services and the architecture, the models, the processes and the consensus mechanisms with the same elements of the other systems under analysis. activities in the fields of standard development that are part of the three initiatives. This task will provide the basis for how these three initiatives will strategically support consensus and efficient standards development going forward. architecture, specifications, innovative concepts and software developments of past or ongoing FP6/FP7 research topics. The use of an RM-ODP approach is selected as: most of the architectural approaches to be compared are based on RM-ODP, it supports distributed processing, it aims at fostering interoperability across heterogeneous systems, it tries to hide distribution to systems developers. However, as most of the systems to be considered have the characteristic of a loosely-coupled network of systems and services instead of a "distributed processing system based on interacting objects", the RM-ODP concepts are tailored for the GIGAS needs. The usage of RM-ODP for GIGAS Requirements and Technology Watch is two-fold: Architectural analysis: It is performed for all projects and initiatives. Its purpose is to identify possibilities but also major obstacles for interoperability. Furthermore, it identifies the major use cases to be analysed in more detail. Use Case Implementation Analysis: It is used to describe how selected use cases of the projects and initiatives are implemented in the different architectures. Its purpose is to identify technological gaps and concrete problems of interoperability. It is performed only for selected use cases. The output of the Technology Watch is an RM-ODP based report containing parallel analysis on the same aspects on the three initiatives integrated by analysis of relevant FP6-FP7 projects and standardization activities. 0.3.2 Comparative Analysis Based on the outcomes of the previous monitoring tasks, GIGAS undertakes a comparative analysis on solutions, requirements, architecture, models, processes and consensus mechanisms used by INSPIRE, GMES and GEOSS, taking into account the inputs from the monitoring of FP6/FP7 research projects and the ongoing standardization activities. Initiative Contact Points will insure that the overall policy framework and schedules for each of the three initiatives will be factored in. The result of the Comparative Analysis includes: A list of recommendations to GEOSS, INSPIRE and GMES to be expanded and processed in depth in the following shaping phase The identification of technological gaps to be explored in the following shaping phase. Guidelines and objectives for the architectural approach within GIGAS Analysis on the schedules of the three initiatives and on the FP6/FP7 programs and standardization activities, with identification of key milestones or intervention points.

Cooperative problem solving with personal mobile information tools in hospitals.

PubMed

Buchauer, A; Werner, R; Haux, R

1998-01-01

Health-care professionals have a broad range of needs for information and cooperation while working at different points of care (e.g., outpatient departments, wards, and functional units such as operating theaters). Patient-related data and medical knowledge have to be widely available to support high-quality patient care. Furthermore, due to the increased specialization of health-care professionals, efficient collaboration is required. Personal mobile information tools have a considerable potential to realize almost ubiquitous information and collaborative support. They enable to unite the functionality of conventional tools such as paper forms, dictating machines, and pagers into one tool. Moreover, they can extend the support already provided by clinical workstations. An approach is described for the integration of mobile information tools with heterogeneous hospital information systems. This approach includes identification of functions which should be provided on mobile tools. Major functions are the presentation of medical records and reports, electronic mailing to support interpersonal communication, and the provision of editors for structured clinical documentation. To realize those functions on mobile tools, we propose a document-based client-server architecture that enables mobile information tools to interoperate with existing computer-based application systems. Open application systems and powerful, partially wireless, hospital-wide networks are the prerequisites for the introduction of mobile information tools.

Interoperability Using Lightweight Metadata Standards: Service & Data Casting, OpenSearch, OPM Provenance, and Shared SciFlo Workflows

NASA Astrophysics Data System (ADS)

Wilson, B. D.; Manipon, G.; Hua, H.; Fetzer, E.

2011-12-01

Under several NASA grants, we are generating multi-sensor merged atmospheric datasets to enable the detection of instrument biases and studies of climate trends over decades of data. For example, under a NASA MEASURES grant we are producing a water vapor climatology from the A-Train instruments, stratified by the Cloudsat cloud classification for each geophysical scene. The generation and proper use of such multi-sensor climate data records (CDR's) requires a high level of openness, transparency, and traceability. To make the datasets self-documenting and provide access to full metadata and traceability, we have implemented a set of capabilities and services using known, interoperable protocols. These protocols include OpenSearch, OPeNDAP, Open Provenance Model, service & data casting technologies using Atom feeds, and REST-callable analysis workflows implemented as SciFlo (XML) documents. We advocate that our approach can serve as a blueprint for how to openly "document and serve" complex, multi-sensor CDR's with full traceability. The capabilities and services provided include: - Discovery of the collections by keyword search, exposed using OpenSearch protocol; - Space/time query across the CDR's granules and all of the input datasets via OpenSearch; - User-level configuration of the production workflows so that scientists can select additional physical variables from the A-Train to add to the next iteration of the merged datasets; - Efficient data merging using on-the-fly OPeNDAP variable slicing & spatial subsetting of data out of input netCDF and HDF files (without moving the entire files); - Self-documenting CDR's published in a highly usable netCDF4 format with groups used to organize the variables, CF-style attributes for each variable, numeric array compression, & links to OPM provenance; - Recording of processing provenance and data lineage into a query-able provenance trail in Open Provenance Model (OPM) format, auto-captured by the workflow engine; - Open Publishing of all of the workflows used to generate products as machine-callable REST web services, using the capabilities of the SciFlo workflow engine; - Advertising of the metadata (e.g. physical variables provided, space/time bounding box, etc.) for our prepared datasets as "datacasts" using the Atom feed format; - Publishing of all datasets via our "DataDrop" service, which exploits the WebDAV protocol to enable scientists to access remote data directories as local files on their laptops; - Rich "web browse" of the CDR's with full metadata and the provenance trail one click away; - Advertising of all services as Google-discoverable "service casts" using the Atom format. The presentation will describe our use of the interoperable protocols and demonstrate the capabilities and service GUI's.

Personalized-detailed clinical model for data interoperability among clinical standards.

PubMed

Khan, Wajahat Ali; Hussain, Maqbool; Afzal, Muhammad; Amin, Muhammad Bilal; Saleem, Muhammad Aamir; Lee, Sungyoung

2013-08-01

Data interoperability among health information exchange (HIE) systems is a major concern for healthcare practitioners to enable provisioning of telemedicine-related services. Heterogeneity exists in these systems not only at the data level but also among different heterogeneous healthcare standards with which these are compliant. The relationship between healthcare organization data and different heterogeneous standards is necessary to achieve the goal of data level interoperability. We propose a personalized-detailed clinical model (P-DCM) approach for the generation of customized mappings that creates the necessary linkage between organization-conformed healthcare standards concepts and clinical model concepts to ensure data interoperability among HIE systems. We consider electronic health record (EHR) standards, openEHR, and HL7 CDA instances transformation using P-DCM. P-DCM concepts associated with openEHR and HL7 CDA help in transformation of instances among these standards. We investigated two datasets: (1) data of 100 diabetic patients, including 50 each of type 1 and type 2, from a local hospital in Korea and (2) data of a single Alzheimer's disease patient. P-DCMs were created for both scenarios, which provided the basis for deriving instances for HL7 CDA and openEHR standards. For proof of concept, we present case studies of encounter information for type 2 diabetes mellitus patients and monitoring of daily routine activities of an Alzheimer's disease patient. These reflect P-DCM-based customized mappings generation with openEHR and HL7 CDA standards. Customized mappings are generated based on the relationship of P-DCM concepts with CDA and openEHR concepts. The objective of this work is to achieve semantic data interoperability among heterogeneous standards. This would lead to effective utilization of resources and allow timely information exchange among healthcare systems.

Personalized-Detailed Clinical Model for Data Interoperability Among Clinical Standards

PubMed Central

Khan, Wajahat Ali; Hussain, Maqbool; Afzal, Muhammad; Amin, Muhammad Bilal; Saleem, Muhammad Aamir

2013-01-01

Abstract Objective: Data interoperability among health information exchange (HIE) systems is a major concern for healthcare practitioners to enable provisioning of telemedicine-related services. Heterogeneity exists in these systems not only at the data level but also among different heterogeneous healthcare standards with which these are compliant. The relationship between healthcare organization data and different heterogeneous standards is necessary to achieve the goal of data level interoperability. We propose a personalized-detailed clinical model (P-DCM) approach for the generation of customized mappings that creates the necessary linkage between organization-conformed healthcare standards concepts and clinical model concepts to ensure data interoperability among HIE systems. Materials and Methods: We consider electronic health record (EHR) standards, openEHR, and HL7 CDA instances transformation using P-DCM. P-DCM concepts associated with openEHR and HL7 CDA help in transformation of instances among these standards. We investigated two datasets: (1) data of 100 diabetic patients, including 50 each of type 1 and type 2, from a local hospital in Korea and (2) data of a single Alzheimer's disease patient. P-DCMs were created for both scenarios, which provided the basis for deriving instances for HL7 CDA and openEHR standards. Results: For proof of concept, we present case studies of encounter information for type 2 diabetes mellitus patients and monitoring of daily routine activities of an Alzheimer's disease patient. These reflect P-DCM-based customized mappings generation with openEHR and HL7 CDA standards. Customized mappings are generated based on the relationship of P-DCM concepts with CDA and openEHR concepts. Conclusions: The objective of this work is to achieve semantic data interoperability among heterogeneous standards. This would lead to effective utilization of resources and allow timely information exchange among healthcare systems. PMID:23875730

Development and Evaluation of a Clinical Note Section Header Terminology

PubMed Central

Denny, Joshua C.; Miller, Randolph A.; Johnson, Kevin B.; Spickard, Anderson

2008-01-01

Clinical documentation is often expressed in natural language text, yet providers often use common organizations that segment these notes in sections, such as “history of present illness” or “physical examination.” We developed a hierarchical section header terminology, supporting mappings to LOINC and other vocabularies; it contained 1109 concepts and 4332 synonyms. Physicians evaluated it compared to LOINC and the Evaluation and Management billing schema using a randomly selected corpus of history and physical notes. Evaluated documents contained a median of 54 sections and 27 “major sections.” There were 16,196 total sections in the evaluation note corpus. The terminology contained 99.9% of the clinical sections; LOINC matched 77% of section header concepts and 20% of section header strings in those documents. The section terminology may enable better clinical note understanding and interoperability. Future development and integration into natural language processing systems is needed. PMID:18999303

Enhancing the many-to-many relations across IHE document sharing communities.

PubMed

Ribeiro, Luís S; Costa, Carlos; Oliveira, José Luís

2012-01-01

The Integrating Healthcare Enterprise (IHE) initiative is an ongoing project aiming to enable true inter-site interoperability in the health IT field. IHE is a work in progress and many challenges need to be overcome before the healthcare Institutions may share patient clinical records transparently and effortless. Configuring, deploying and testing an IHE document sharing community requires a significant effort to plan and maintain the supporting IT infrastructure. With the new paradigm of cloud computing is now possible to launch software devices on demand and paying accordantly to the usage. This paper presents a framework designed with purpose of expediting the creation of IHE document sharing communities. It provides semi-ready templates of sharing communities that will be customized according the community needs. The framework is a meeting point of the healthcare institutions, creating a favourable environment that might converge in new inter-institutional professional relationships and eventually the creation of new Affinity Domains.

Ocean Data Interoperability Platform (ODIP): developing a common framework for global marine data management

NASA Astrophysics Data System (ADS)

Glaves, H. M.

2015-12-01

In recent years marine research has become increasingly multidisciplinary in its approach with a corresponding rise in the demand for large quantities of high quality interoperable data as a result. This requirement for easily discoverable and readily available marine data is currently being addressed by a number of regional initiatives with projects such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Integrated Marine Observing System (IMOS) in Australia, having implemented local infrastructures to facilitate the exchange of standardised marine datasets. However, each of these systems has been developed to address local requirements and created in isolation from those in other regions.Multidisciplinary marine research on a global scale necessitates a common framework for marine data management which is based on existing data systems. The Ocean Data Interoperability Platform project is seeking to address this requirement by bringing together selected regional marine e-infrastructures for the purposes of developing interoperability across them. By identifying the areas of commonality and incompatibility between these data infrastructures, and leveraging the development activities and expertise of these individual systems, three prototype interoperability solutions are being created which demonstrate the effective sharing of marine data and associated metadata across the participating regional data infrastructures as well as with other target international systems such as GEO, COPERNICUS etc.These interoperability solutions combined with agreed best practice and approved standards, form the basis of a common global approach to marine data management which can be adopted by the wider marine research community. To encourage implementation of these interoperability solutions by other regional marine data infrastructures an impact assessment is being conducted to determine both the technical and financial implications of deploying them alongside existing services. The associated best practice and common standards are also being disseminated to the user community through relevant accreditation processes and related initiatives such as the Research Data Alliance and the Belmont Forum.

Standard-compliant real-time transmission of ECGs: harmonization of ISO/IEEE 11073-PHD and SCP-ECG.

PubMed

Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

2009-01-01

Ambient assisted living and integrated care in an aging society is based on the vision of the lifelong Electronic Health Record calling for HealthCare Information Systems and medical device interoperability. For medical devices this aim can be achieved by the consistent implementation of harmonized international interoperability standards. The ISO/IEEE 11073 (x73) family of standards is a reference standard for medical device interoperability. In its Personal Health Device (PHD) version several devices have been included, but an ECG device specialization is not yet available. On the other hand, the SCP-ECG standard for short-term diagnostic ECGs (EN1064) has been recently approved as an international standard ISO/IEEE 11073-91064:2009. In this paper, the relationships between a proposed x73-PHD model for an ECG device and the fields of the SCP-ECG standard are investigated. A proof-of-concept implementation of the proposed x73-PHD ECG model is also presented, identifying open issues to be addressed by standards development for the wider interoperability adoption of x73-PHD standards.

[Analysis of health terminologies for use as ontologies in healthcare information systems].

PubMed

Romá-Ferri, Maria Teresa; Palomar, Manuel

2008-01-01

Ontologies are a resource that allow the concept of meaning to be represented informatically, thus avoiding the limitations imposed by standardized terms. The objective of this study was to establish the extent to which terminologies could be used for the design of ontologies, which could be serve as an aid to resolve problems such as semantic interoperability and knowledge reusability in healthcare information systems. To determine the extent to which terminologies could be used as ontologies, six of the most important terminologies in clinical, epidemiologic, documentation and administrative-economic contexts were analyzed. The following characteristics were verified: conceptual coverage, hierarchical structure, conceptual granularity of the categories, conceptual relations, and the language used for conceptual representation. MeSH, DeCS and UMLS ontologies were considered lightweight. The main differences among these ontologies concern conceptual specification, the types of relation and the restrictions among the associated concepts. SNOMED and GALEN ontologies have declaratory formalism, based on logical descriptions. These ontologies include explicit qualities and show greater restrictions among associated concepts and rule combinations and were consequently considered as heavyweight. Analysis of the declared representation of the terminologies shows the extent to which they could be reused as ontologies. Their degree of usability depends on whether the aim is for healthcare information systems to solve problems of semantic interoperability (lightweight ontologies) or to reuse the systems' knowledge as an aid to decision making (heavyweight ontologies) and for non-structured information retrieval, extraction, and classification.

Supply Chain Interoperability Measurement

DTIC Science & Technology

2015-06-19

Supply Chain Interoperability Measurement DISSERTATION June 2015 Christos E. Chalyvidis, Major, Hellenic Air...ENS-DS-15-J-001 SUPPLY CHAIN INTEROPERABILITY MEASUREMENT DISSERTATION Presented to the Faculty Department of Operational Sciences...INTEROPERABILITY MEASUREMENT Christos E. Chalyvidis, BS, MSc. Major, Hellenic Air Force Committee Membership: Dr. A.W. Johnson Chair

The impact of interoperability of electronic health records on ambulatory physician practices: a discrete-event simulation study.

PubMed

Zhou, Yuan; Ancker, Jessica S; Upadhye, Mandar; McGeorge, Nicolette M; Guarrera, Theresa K; Hegde, Sudeep; Crane, Peter W; Fairbanks, Rollin J; Bisantz, Ann M; Kaushal, Rainu; Lin, Li

2013-01-01

The effect of health information technology (HIT) on efficiency and workload among clinical and nonclinical staff has been debated, with conflicting evidence about whether electronic health records (EHRs) increase or decrease effort. None of this paper to date, however, examines the effect of interoperability quantitatively using discrete event simulation techniques. To estimate the impact of EHR systems with various levels of interoperability on day-to-day tasks and operations of ambulatory physician offices. Interviews and observations were used to collect workflow data from 12 adult primary and specialty practices. A discrete event simulation model was constructed to represent patient flows and clinical and administrative tasks of physicians and staff members. High levels of EHR interoperability were associated with reduced time spent by providers on four tasks: preparing lab reports, requesting lab orders, prescribing medications, and writing referrals. The implementation of an EHR was associated with less time spent by administrators but more time spent by physicians, compared with time spent at paper-based practices. In addition, the presence of EHRs and of interoperability did not significantly affect the time usage of registered nurses or the total visit time and waiting time of patients. This paper suggests that the impact of using HIT on clinical and nonclinical staff work efficiency varies, however, overall it appears to improve time efficiency more for administrators than for physicians and nurses.

CCR+: Metadata Based Extended Personal Health Record Data Model Interoperable with the ASTM CCR Standard.

PubMed

Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong; Kim, Ju Han

2014-01-01

Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models.

OR.NET: a service-oriented architecture for safe and dynamic medical device interoperability.

PubMed

Kasparick, Martin; Schmitz, Malte; Andersen, Björn; Rockstroh, Max; Franke, Stefan; Schlichting, Stefan; Golatowski, Frank; Timmermann, Dirk

2018-02-23

Modern surgical departments are characterized by a high degree of automation supporting complex procedures. It recently became apparent that integrated operating rooms can improve the quality of care, simplify clinical workflows, and mitigate equipment-related incidents and human errors. Particularly using computer assistance based on data from integrated surgical devices is a promising opportunity. However, the lack of manufacturer-independent interoperability often prevents the deployment of collaborative assistive systems. The German flagship project OR.NET has therefore developed, implemented, validated, and standardized concepts for open medical device interoperability. This paper describes the universal OR.NET interoperability concept enabling a safe and dynamic manufacturer-independent interconnection of point-of-care (PoC) medical devices in the operating room and the whole clinic. It is based on a protocol specifically addressing the requirements of device-to-device communication, yet also provides solutions for connecting the clinical information technology (IT) infrastructure. We present the concept of a service-oriented medical device architecture (SOMDA) as well as an introduction to the technical specification implementing the SOMDA paradigm, currently being standardized within the IEEE 11073 service-oriented device connectivity (SDC) series. In addition, the Session concept is introduced as a key enabler for safe device interconnection in highly dynamic ensembles of networked medical devices; and finally, some security aspects of a SOMDA are discussed.

Interoperability and information discovery

USGS Publications Warehouse

Christian, E.

2001-01-01

In the context of information systems, there is interoperability when the distinctions between separate information systems are not a barrier to accomplishing a task that spans those systems. Interoperability so defined implies that there are commonalities among the systems involved and that one can exploit such commonalities to achieve interoperability. The challenge of a particular interoperability task is to identify relevant commonalities among the systems involved and to devise mechanisms that exploit those commonalities. The present paper focuses on the particular interoperability task of information discovery. The Global Information Locator Service (GILS) is described as a policy, standards, and technology framework for addressing interoperable information discovery on a global and long-term basis. While there are many mechanisms for people to discover and use all manner of data and information resources, GILS initiatives exploit certain key commonalities that seem to be sufficient to realize useful information discovery interoperability at a global, long-term scale. This paper describes ten of the specific commonalities that are key to GILS initiatives. It presents some of the practical implications for organizations in various roles: content provider, system engineer, intermediary, and searcher. The paper also provides examples of interoperable information discovery as deployed using GILS in four types of information communities: bibliographic, geographic, environmental, and government.

80 FR 46010 - Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2015-08-03

...] Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments AGENCY: Food... workshop entitled ``FDA/CDC/NLM Workshop on Promoting Semantic Interoperability of Laboratory Data.'' The... to promoting the semantic interoperability of laboratory data between in vitro diagnostic devices and...

A unified architecture for biomedical search engines based on semantic web technologies.

PubMed

Jalali, Vahid; Matash Borujerdi, Mohammad Reza

2011-04-01

There is a huge growth in the volume of published biomedical research in recent years. Many medical search engines are designed and developed to address the over growing information needs of biomedical experts and curators. Significant progress has been made in utilizing the knowledge embedded in medical ontologies and controlled vocabularies to assist these engines. However, the lack of common architecture for utilized ontologies and overall retrieval process, hampers evaluating different search engines and interoperability between them under unified conditions. In this paper, a unified architecture for medical search engines is introduced. Proposed model contains standard schemas declared in semantic web languages for ontologies and documents used by search engines. Unified models for annotation and retrieval processes are other parts of introduced architecture. A sample search engine is also designed and implemented based on the proposed architecture in this paper. The search engine is evaluated using two test collections and results are reported in terms of precision vs. recall and mean average precision for different approaches used by this search engine.

Alignment of ICNP® 2.0 ontology and a proposed INCP® Brazilian ontology.

PubMed

Carvalho, Carina Maris Gaspar; Cubas, Marcia Regina; Malucelli, Andreia; Nóbrega, Maria Miriam Lima da

2014-01-01

to align the International Classification for Nursing Practice (ICNP®) Version 2.0 ontology and a proposed INCP® Brazilian Ontology. document-based, exploratory and descriptive study, the empirical basis of which was provided by the ICNP® 2.0 Ontology and the INCP® Brazilian Ontology. The ontology alignment was performed using a computer tool with algorithms to identify correspondences between concepts, which were organized and analyzed according to their presence or absence, their names, and their sibling, parent, and child classes. there were 2,682 concepts present in the ICNP® 2.0 Ontology that were missing in the Brazilian Ontology; 717 concepts present in the Brazilian Ontology were missing in the ICNP® 2.0 Ontology; and there were 215 pairs of matching concepts. it is believed that the correspondences identified in this study might contribute to the interoperability between the representations of nursing practice elements in ICNP®, thus allowing the standardization of nursing records based on this classification system.

Ontology aided modeling of organic reaction mechanisms with flexible and fragment based XML markup procedures.

PubMed

Sankar, Punnaivanam; Aghila, Gnanasekaran

2007-01-01

The mechanism models for primary organic reactions encoding the structural fragments undergoing substitution, addition, elimination, and rearrangements are developed. In the proposed models, each and every structural component of mechanistic pathways is represented with flexible and fragment based markup technique in XML syntax. A significant feature of the system is the encoding of the electron movements along with the other components like charges, partial charges, half bonded species, lone pair electrons, free radicals, reaction arrows, etc. needed for a complete representation of reaction mechanism. The rendering of reaction schemes described with the proposed methodology is achieved with a concise XML extension language interoperating with the structure markup. The reaction scheme is visualized as 2D graphics in a browser by converting them into SVG documents enabling the desired layouts normally perceived by the chemists conventionally. An automatic representation of the complex patterns of the reaction mechanism is achieved by reusing the knowledge in chemical ontologies and developing artificial intelligence components in terms of axioms.

75 FR 63462 - Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid Interoperability Standards October 7, 2010... directs the development of a framework to achieve interoperability of smart grid devices and systems...

81 FR 68435 - Workshop on Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2016-10-04

...] Workshop on Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments... Semantic Interoperability of Laboratory Data.'' The purpose of this public workshop is to receive and... Semantic Interoperability of Laboratory Data.'' Received comments will be placed in the docket and, except...

Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes

PubMed Central

Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

2015-01-01

Introduction The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Methods Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. Results We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. Conclusions We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. PMID:25670753

Gaps Analysis of Integrating Product Design, Manufacturing, and Quality Data in The Supply Chain Using Model-Based Definition.

PubMed

Trainer, Asa; Hedberg, Thomas; Feeney, Allison Barnard; Fischer, Kevin; Rosche, Phil

2016-01-01

Advances in information technology triggered a digital revolution that holds promise of reduced costs, improved productivity, and higher quality. To ride this wave of innovation, manufacturing enterprises are changing how product definitions are communicated - from paper to models. To achieve industry's vision of the Model-Based Enterprise (MBE), the MBE strategy must include model-based data interoperability from design to manufacturing and quality in the supply chain. The Model-Based Definition (MBD) is created by the original equipment manufacturer (OEM) using Computer-Aided Design (CAD) tools. This information is then shared with the supplier so that they can manufacture and inspect the physical parts. Today, suppliers predominantly use Computer-Aided Manufacturing (CAM) and Coordinate Measuring Machine (CMM) models for these tasks. Traditionally, the OEM has provided design data to the supplier in the form of two-dimensional (2D) drawings, but may also include a three-dimensional (3D)-shape-geometry model, often in a standards-based format such as ISO 10303-203:2011 (STEP AP203). The supplier then creates the respective CAM and CMM models and machine programs to produce and inspect the parts. In the MBE vision for model-based data exchange, the CAD model must include product-and-manufacturing information (PMI) in addition to the shape geometry. Today's CAD tools can generate models with embedded PMI. And, with the emergence of STEP AP242, a standards-based model with embedded PMI can now be shared downstream. The on-going research detailed in this paper seeks to investigate three concepts. First, that the ability to utilize a STEP AP242 model with embedded PMI for CAD-to-CAM and CAD-to-CMM data exchange is possible and valuable to the overall goal of a more efficient process. Second, the research identifies gaps in tools, standards, and processes that inhibit industry's ability to cost-effectively achieve model-based-data interoperability in the pursuit of the MBE vision. Finally, it also seeks to explore the interaction between CAD and CMM processes and determine if the concept of feedback from CAM and CMM back to CAD is feasible. The main goal of our study is to test the hypothesis that model-based-data interoperability from CAD-to-CAM and CAD-to-CMM is feasible through standards-based integration. This paper presents several barriers to model-based-data interoperability. Overall, the project team demonstrated the exchange of product definition data between CAD, CAM, and CMM systems using standards-based methods. While gaps in standards coverage were identified, the gaps should not stop industry's progress toward MBE. The results of our study provide evidence in support of an open-standards method to model-based-data interoperability, which would provide maximum value and impact to industry.

Robotics Systems Joint Project Office (RSJPO) Interoperability Profiles (IOPS) 101

DTIC Science & Technology

2012-07-01

interoperability, although they are supported by some interoperability attributes  For example, stair climbing » Stair climbing is not something that...IOPs need to specify » However, the mobility & actuation related interoperable messages can be used to provide stair climbing » Also...interoperability can enable management of different poses or modes, one of which may be stair climbing R O B O T IC S Y S T E M S J P O L e a d e r s h i p

76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

...-01] NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft... draft version of the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0... Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0) (Draft) for public review and...

Warfighter IT Interoperability Standards Study

DTIC Science & Technology

2012-07-22

data (e.g. messages) between systems ? ii) What process did you used to validate and certify semantic interoperability between your...other systems at this time There was no requirement to validate and certify semantic interoperability The DLS program exchanges data with... semantics Testing for System Compliance with Data Models Verify and Certify Interoperability Using Data

MQ-4C Triton Unmanned Aircraft System (MQ-4C Triton)

DTIC Science & Technology

2015-12-01

will respond to theater level operational or national strategic taskings. MQ-4C Triton December 2015 SAR March 23, 2016 15:26:01 UNCLASSIFIED 6...88% at a mission radius of 2,000 nm Level of Interoperability 1-5 BLOS and LOS from MOB/ FOB (Land Based) MCS BLOS and LOS from MOB/ FOB (Land...MCS UA Mission Radius >=3,000 nm >=3,000 nm >=2,000 nm TBD >=2,000 nm Level Of Interoperability 2 Capability LOS/BLOS multi-ISR payload reception to

Arc-An OAI Service Provider for Digital Library Federation; Kepler-An OAI Data/Service Provider for the Individual; Information Objects and Rights Management: A Mediation-Based Approach to DRM Interoperability; Automated Name Authority Control and Enhanced Searching in the Levy Collection; Renardus Project Developments and the Wider Digital Library Context.

ERIC Educational Resources Information Center

Liu, Xiaoming; Maly, Kurt; Zubair, Mohammad; Nelson, Michael L.; Erickson, John S.; DiLauro, Tim; Choudhury, G. Sayeed; Patton, Mark; Warner, James W.; Brown, Elizabeth W.; Heery, Rachel; Carpenter, Leona; Day, Michael

2001-01-01

Includes five articles that discuss the OAI (Open Archive Initiative), an interface between data providers and service providers; information objects and digital rights management interoperability; digitizing library collections, including automated name authority control, metadata, and text searching engines; and building digital library services…

Kalman approach to accuracy management for interoperable heterogeneous model abstraction within an HLA-compliant simulation

NASA Astrophysics Data System (ADS)

Leskiw, Donald M.; Zhau, Junmei

2000-06-01

This paper reports on results from an ongoing project to develop methodologies for representing and managing multiple, concurrent levels of detail and enabling high performance computing using parallel arrays within distributed object-based simulation frameworks. At this time we present the methodology for representing and managing multiple, concurrent levels of detail and modeling accuracy by using a representation based on the Kalman approach for estimation. The Kalman System Model equations are used to represent model accuracy, Kalman Measurement Model equations provide transformations between heterogeneous levels of detail, and interoperability among disparate abstractions is provided using a form of the Kalman Update equations.

Exploring a model-driven architecture (MDA) approach to health care information systems development.

PubMed

Raghupathi, Wullianallur; Umar, Amjad

2008-05-01

To explore the potential of the model-driven architecture (MDA) in health care information systems development. An MDA is conceptualized and developed for a health clinic system to track patient information. A prototype of the MDA is implemented using an advanced MDA tool. The UML provides the underlying modeling support in the form of the class diagram. The PIM to PSM transformation rules are applied to generate the prototype application from the model. The result of the research is a complete MDA methodology to developing health care information systems. Additional insights gained include development of transformation rules and documentation of the challenges in the application of MDA to health care. Design guidelines for future MDA applications are described. The model has the potential for generalizability. The overall approach supports limited interoperability and portability. The research demonstrates the applicability of the MDA approach to health care information systems development. When properly implemented, it has the potential to overcome the challenges of platform (vendor) dependency, lack of open standards, interoperability, portability, scalability, and the high cost of implementation.

The 2006 NESCent Phyloinformatics Hackathon: A Field Report

PubMed Central

Lapp, Hilmar; Bala, Sendu; Balhoff, James P.; Bouck, Amy; Goto, Naohisa; Holder, Mark; Holland, Richard; Holloway, Alisha; Katayama, Toshiaki; Lewis, Paul O.; Mackey, Aaron J.; Osborne, Brian I.; Piel, William H.; Kosakovsky Pond, Sergei L.; Poon, Art F.Y.; Qiu, Wei-Gang; Stajich, Jason E.; Stoltzfus, Arlin; Thierer, Tobias; Vilella, Albert J.; Vos, Rutger A.; Zmasek, Christian M.; Zwickl, Derrick J.; Vision, Todd J.

2007-01-01

In December, 2006, a group of 26 software developers from some of the most widely used life science programming toolkits and phylogenetic software projects converged on Durham, North Carolina, for a Phyloinformatics Hackathon, an intense five-day collaborative software coding event sponsored by the National Evolutionary Synthesis Center (NESCent). The goal was to help researchers to integrate multiple phylogenetic software tools into automated workflows. Participants addressed deficiencies in interoperability between programs by implementing “glue code” and improving support for phylogenetic data exchange standards (particularly NEXUS) across the toolkits. The work was guided by use-cases compiled in advance by both developers and users, and the code was documented as it was developed. The resulting software is freely available for both users and developers through incorporation into the distributions of several widely-used open-source toolkits. We explain the motivation for the hackathon, how it was organized, and discuss some of the outcomes and lessons learned. We conclude that hackathons are an effective mode of solving problems in software interoperability and usability, and are underutilized in scientific software development.

Data Quality and Interoperability Challenges for eHealth Exchange Participants: Observations from the Department of Veterans Affairs' Virtual Lifetime Electronic Record Health Pilot Phase.

PubMed

Botts, Nathan; Bouhaddou, Omar; Bennett, Jamie; Pan, Eric; Byrne, Colene; Mercincavage, Lauren; Olinger, Lois; Hunolt, Elaine; Cullen, Theresa

2014-01-01

Authors studied the United States (U.S.) Department of Veterans Affairs' (VA) Virtual Lifetime Electronic Record (VLER) Health pilot phase relative to two attributes of data quality - the adoption of eHealth Exchange data standards, and clinical content exchanged. The VLER Health pilot was an early effort in testing implementation of eHealth Exchange standards and technology. Testing included evaluation of exchange data from the VLER Health pilot sites partners: VA, U.S. Department of Defense (DoD), and private sector health care organizations. Domains assessed data quality and interoperability as it relates to: 1) conformance with data standards related to the underlying structure of C32 Summary Documents (C32) produced by eHealth Exchange partners; and 2) the types of C32 clinical content exchanged. This analysis identified several standards non-conformance issues in sample C32 files and informed further discourse on the methods needed to effectively monitor Health Information Exchange (HIE) data content and standards conformance.

Applying Sensor Web Technology to Marine Sensor Data

NASA Astrophysics Data System (ADS)

Jirka, Simon; del Rio, Joaquin; Mihai Toma, Daniel; Nüst, Daniel; Stasch, Christoph; Delory, Eric

2015-04-01

In this contribution we present two activities illustrating how Sensor Web technology helps to enable a flexible and interoperable sharing of marine observation data based on standards. An important foundation is the Sensor Web Architecture developed by the European FP7 project NeXOS (Next generation Low-Cost Multifunctional Web Enabled Ocean Sensor Systems Empowering Marine, Maritime and Fisheries Management). This architecture relies on the Open Geospatial Consortium's (OGC) Sensor Web Enablement (SWE) framework. It is an exemplary solution for facilitating the interoperable exchange of marine observation data within and between (research) organisations. The architecture addresses a series of functional and non-functional requirements which are fulfilled through different types of OGC SWE components. The diverse functionalities offered by the NeXOS Sensor Web architecture are shown in the following overview: - Pull-based observation data download: This is achieved through the OGC Sensor Observation Service (SOS) 2.0 interface standard. - Push-based delivery of observation data to allow users the subscription to new measurements that are relevant for them: For this purpose there are currently several specification activities under evaluation (e.g. OGC Sensor Event Service, OGC Publish/Subscribe Standards Working Group). - (Web-based) visualisation of marine observation data: Implemented through SOS client applications. - Configuration and controlling of sensor devices: This is ensured through the OGC Sensor Planning Service 2.0 interface. - Bridging between sensors/data loggers and Sensor Web components: For this purpose several components such as the "Smart Electronic Interface for Sensor Interoperability" (SEISI) concept are developed; this is complemented by a more lightweight SOS extension (e.g. based on the W3C Efficient XML Interchange (EXI) format). To further advance this architecture, there is on-going work to develop dedicated profiles of selected OGC SWE specifications that provide stricter guidance how these standards shall be applied to marine data (e.g. SensorML 2.0 profiles stating which metadata elements are mandatory building upon the ESONET Sensor Registry developments, etc.). Within the NeXOS project the presented architecture is implemented as a set of open source components. These implementations can be re-used by all interested scientists and data providers needing tools for publishing or consuming oceanographic sensor data. In further projects such as the European project FixO3 (Fixed-point Open Ocean Observatories), these software development activities are complemented with additional efforts to provide guidance how Sensor Web technology can be applied in an efficient manner. This way, not only software components are made available but also documentation and information resources that help to understand which types of Sensor Web deployments are best suited to fulfil different types of user requirements.

Process-oriented integration and coordination of healthcare services across organizational boundaries.

PubMed

Tello-Leal, Edgar; Chiotti, Omar; Villarreal, Pablo David

2012-12-01

The paper presents a methodology that follows a top-down approach based on a Model-Driven Architecture for integrating and coordinating healthcare services through cross-organizational processes to enable organizations providing high quality healthcare services and continuous process improvements. The methodology provides a modeling language that enables organizations conceptualizing an integration agreement, and identifying and designing cross-organizational process models. These models are used for the automatic generation of: the private view of processes each organization should perform to fulfill its role in cross-organizational processes, and Colored Petri Net specifications to implement these processes. A multi-agent system platform provides agents able to interpret Colored Petri-Nets to enable the communication between the Healthcare Information Systems for executing the cross-organizational processes. Clinical documents are defined using the HL7 Clinical Document Architecture. This methodology guarantees that important requirements for healthcare services integration and coordination are fulfilled: interoperability between heterogeneous Healthcare Information Systems; ability to cope with changes in cross-organizational processes; guarantee of alignment between the integrated healthcare service solution defined at the organizational level and the solution defined at technological level; and the distributed execution of cross-organizational processes keeping the organizations autonomy.

76 FR 51271 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... interoperable public safety broadband network. The establishment of a common air interface for 700 MHz public safety broadband networks will create a foundation for interoperability and provide a clear path for the...

Intelligent E-Learning Systems: Automatic Construction of Ontologies

NASA Astrophysics Data System (ADS)

Peso, Jesús del; de Arriaga, Fernando

2008-05-01

During the last years a new generation of Intelligent E-Learning Systems (ILS) has emerged with enhanced functionality due, mainly, to influences from Distributed Artificial Intelligence, to the use of cognitive modelling, to the extensive use of the Internet, and to new educational ideas such as the student-centered education and Knowledge Management. The automatic construction of ontologies provides means of automatically updating the knowledge bases of their respective ILS, and of increasing their interoperability and communication among them, sharing the same ontology. The paper presents a new approach, able to produce ontologies from a small number of documents such as those obtained from the Internet, without the assistance of large corpora, by using simple syntactic rules and some semantic information. The method is independent of the natural language used. The use of a multi-agent system increases the flexibility and capability of the method. Although the method can be easily improved, the results so far obtained, are promising.

Tisettanta case study: the interoperation of furniture production companies

NASA Astrophysics Data System (ADS)

Amarilli, Fabrizio; Spreafico, Alberto

This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

Computational knowledge integration in biopharmaceutical research.

PubMed

Ficenec, David; Osborne, Mark; Pradines, Joel; Richards, Dan; Felciano, Ramon; Cho, Raymond J; Chen, Richard O; Liefeld, Ted; Owen, James; Ruttenberg, Alan; Reich, Christian; Horvath, Joseph; Clark, Tim

2003-09-01

An initiative to increase biopharmaceutical research productivity by capturing, sharing and computationally integrating proprietary scientific discoveries with public knowledge is described. This initiative involves both organisational process change and multiple interoperating software systems. The software components rely on mutually supporting integration techniques. These include a richly structured ontology, statistical analysis of experimental data against stored conclusions, natural language processing of public literature, secure document repositories with lightweight metadata, web services integration, enterprise web portals and relational databases. This approach has already begun to increase scientific productivity in our enterprise by creating an organisational memory (OM) of internal research findings, accessible on the web. Through bringing together these components it has also been possible to construct a very large and expanding repository of biological pathway information linked to this repository of findings which is extremely useful in analysis of DNA microarray data. This repository, in turn, enables our research paradigm to be shifted towards more comprehensive systems-based understandings of drug action.

A sensor data format incorporating battery charge information for smartphone-based mHealth applications

NASA Astrophysics Data System (ADS)

Escobar, Rodrigo; Akopian, David; Boppana, Rajendra

2015-03-01

Remote health monitoring systems involve energy-constrained devices, such as sensors and mobile gateways. Current data formats for communication of health data, such as DICOM and HL7, were not designed for multi-sensor applications or to enable the management of power-constrained devices in health monitoring processes. In this paper, a data format suitable for collection of multiple sensor data, including readings and other operational parameters is presented. By using the data format, the system management can assess energy consumptions and plan realistic monitoring scenarios. The proposed data format not only outperforms other known data formats in terms of readability, flexibility, interoperability and validation of compliant documents, but also enables energy assessment capability for realistic data collection scenarios and maintains or even reduces the overhead introduced due to formatting. Additionally, we provide analytical methods to estimate incremental energy consumption by various sensors and experiments to measure the actual battery drain on smartphones.

Quality and efficiency successes leveraging IT and new processes.

PubMed

Chaiken, Barry P; Christian, Charles E; Johnson, Liz

2007-01-01

Today, healthcare annually invests billions of dollars in information technology, including clinical systems, electronic medical records and interoperability platforms. While continued investment and parallel development of standards are critical to secure exponential benefits from clinical information technology, intelligent and creative redesign of processes through path innovation is necessary to deliver meaningful value. Reports from two organizations included in this report review the steps taken to reinvent clinical processes that best leverage information technology to deliver safer and more efficient care. Good Samaritan Hospital, Vincennes, Indiana, implemented electronic charting, point-of-care bar coding of medications prior to administration, and integrated clinical documentation for nursing, laboratory, radiology and pharmacy. Tenet Healthcare, during its implementation and deployment of multiple clinical systems across several hospitals, focused on planning that included team-based process redesign. In addition, Tenet constructed valuable and measurable metrics that link outcomes with its strategic goals.

Political, policy and social barriers to health system interoperability: emerging opportunities of Web 2.0 and 3.0.

PubMed

Juzwishin, Donald W M

2009-01-01

Achieving effective health informatics interoperability in a fragmented and uncoordinated health system is by definition not possible. Interoperability requires the simultaneous integration of health care processes and information across different types and levels of care (systems thinking). The fundamental argument of this paper is that information system interoperability will remain an unfulfilled hope until health reforms effectively address the governance (accountability), structural and process barriers to interoperability of health care delivery. The ascendency of Web 2.0 and 3.0, although still unproven, signals the opportunity to accelerate patients' access to health information and their health record. Policy suggestions for simultaneously advancing health system delivery and information system interoperability are posited.

D-ATM, a working example of health care interoperability: From dirt path to gravel road.

PubMed

DeClaris, John-William

2009-01-01

For many years, there have been calls for interoperability within health care systems. The technology currently exists and is being used in business areas like banking and commerce, to name a few. Yet the question remains, why has interoperability not been achieved in health care? This paper examines issues encountered and success achieved with interoperability during the development of the Digital Access To Medication (D-ATM) project, sponsored by the Substance Abuse and Mental Health Services Administration (SAMHSA). D-ATM is the first government funded interoperable patient management system. The goal of this paper is to provide lessons learned and propose one possible road map for health care interoperability within private industry and how government can help.

Facilitating secondary use of medical data by using openEHR archetypes.

PubMed

Kohl, Christian D; Garde, Sebastian; Knaup, Petra

2010-01-01

Clinical trials are of high importance for medical progress. But even though more and more clinical data is available in electronic patient records (EPRs) and more and more electronic data capture (EDC) systems are used in trials, there is still a gap which makes EPR / EDC interoperability difficult and hampers secondary use of medical routine data. The openEHR architecture for Electronic Health Records is based on a two level modeling approach which makes use of 'archetypes'. We want to analyze whether archetypes can help to bridge this gap by building an integrated EPR / EDC system based on openEHR archetypes. We used the 'openEHR Reference Framework and Application' (Opereffa) and existing archetypes for medical data. Furthermore, we developed dedicated archetypes to document study meta data. We developed a first prototype implementation of an archetype based integrated EPR / EDC system. Next steps will be the evaluation of an extended prototype in a real clinical trial scenario. Opereffa was a good starting point for our work. OpenEHR archetypes proved useful for secondary use of health data.

The 2nd DBCLS BioHackathon: interoperable bioinformatics Web services for integrated applications

PubMed Central

2011-01-01

Background The interaction between biological researchers and the bioinformatics tools they use is still hampered by incomplete interoperability between such tools. To ensure interoperability initiatives are effectively deployed, end-user applications need to be aware of, and support, best practices and standards. Here, we report on an initiative in which software developers and genome biologists came together to explore and raise awareness of these issues: BioHackathon 2009. Results Developers in attendance came from diverse backgrounds, with experts in Web services, workflow tools, text mining and visualization. Genome biologists provided expertise and exemplar data from the domains of sequence and pathway analysis and glyco-informatics. One goal of the meeting was to evaluate the ability to address real world use cases in these domains using the tools that the developers represented. This resulted in i) a workflow to annotate 100,000 sequences from an invertebrate species; ii) an integrated system for analysis of the transcription factor binding sites (TFBSs) enriched based on differential gene expression data obtained from a microarray experiment; iii) a workflow to enumerate putative physical protein interactions among enzymes in a metabolic pathway using protein structure data; iv) a workflow to analyze glyco-gene-related diseases by searching for human homologs of glyco-genes in other species, such as fruit flies, and retrieving their phenotype-annotated SNPs. Conclusions Beyond deriving prototype solutions for each use-case, a second major purpose of the BioHackathon was to highlight areas of insufficiency. We discuss the issues raised by our exploration of the problem/solution space, concluding that there are still problems with the way Web services are modeled and annotated, including: i) the absence of several useful data or analysis functions in the Web service "space"; ii) the lack of documentation of methods; iii) lack of compliance with the SOAP/WSDL specification among and between various programming-language libraries; and iv) incompatibility between various bioinformatics data formats. Although it was still difficult to solve real world problems posed to the developers by the biological researchers in attendance because of these problems, we note the promise of addressing these issues within a semantic framework. PMID:21806842

Oceanotron, Scalable Server for Marine Observations

NASA Astrophysics Data System (ADS)

Loubrieu, T.; Bregent, S.; Blower, J. D.; Griffiths, G.

2013-12-01

Ifremer, French marine institute, is deeply involved in data management for different ocean in-situ observation programs (ARGO, OceanSites, GOSUD, ...) or other European programs aiming at networking ocean in-situ observation data repositories (myOcean, seaDataNet, Emodnet). To capitalize the effort for implementing advance data dissemination services (visualization, download with subsetting) for these programs and generally speaking water-column observations repositories, Ifremer decided to develop the oceanotron server (2010). Knowing the diversity of data repository formats (RDBMS, netCDF, ODV, ...) and the temperamental nature of the standard interoperability interface profiles (OGC/WMS, OGC/WFS, OGC/SOS, OpeNDAP, ...), the server is designed to manage plugins: - StorageUnits : which enable to read specific data repository formats (netCDF/OceanSites, RDBMS schema, ODV binary format). - FrontDesks : which get external requests and send results for interoperable protocols (OGC/WMS, OGC/SOS, OpenDAP). In between a third type of plugin may be inserted: - TransformationUnits : which enable ocean business related transformation of the features (for example conversion of vertical coordinates from pressure in dB to meters under sea surface). The server is released under open-source license so that partners can develop their own plugins. Within MyOcean project, University of Reading has plugged a WMS implementation as an oceanotron frontdesk. The modules are connected together by sharing the same information model for marine observations (or sampling features: vertical profiles, point series and trajectories), dataset metadata and queries. The shared information model is based on OGC/Observation & Measurement and Unidata/Common Data Model initiatives. The model is implemented in java (http://www.ifremer.fr/isi/oceanotron/javadoc/). This inner-interoperability level enables to capitalize ocean business expertise in software development without being indentured to specific data formats or protocols. Oceanotron is deployed at seven European data centres for marine in-situ observations within myOcean. While additional extensions are still being developed, to promote new collaborative initiatives, a work is now done on continuous and distributed integration (jenkins, maven), shared reference documentation (on alfresco) and code and release dissemination (sourceforge, github).

The 2nd DBCLS BioHackathon: interoperable bioinformatics Web services for integrated applications.

PubMed

Katayama, Toshiaki; Wilkinson, Mark D; Vos, Rutger; Kawashima, Takeshi; Kawashima, Shuichi; Nakao, Mitsuteru; Yamamoto, Yasunori; Chun, Hong-Woo; Yamaguchi, Atsuko; Kawano, Shin; Aerts, Jan; Aoki-Kinoshita, Kiyoko F; Arakawa, Kazuharu; Aranda, Bruno; Bonnal, Raoul Jp; Fernández, José M; Fujisawa, Takatomo; Gordon, Paul Mk; Goto, Naohisa; Haider, Syed; Harris, Todd; Hatakeyama, Takashi; Ho, Isaac; Itoh, Masumi; Kasprzyk, Arek; Kido, Nobuhiro; Kim, Young-Joo; Kinjo, Akira R; Konishi, Fumikazu; Kovarskaya, Yulia; von Kuster, Greg; Labarga, Alberto; Limviphuvadh, Vachiranee; McCarthy, Luke; Nakamura, Yasukazu; Nam, Yunsun; Nishida, Kozo; Nishimura, Kunihiro; Nishizawa, Tatsuya; Ogishima, Soichi; Oinn, Tom; Okamoto, Shinobu; Okuda, Shujiro; Ono, Keiichiro; Oshita, Kazuki; Park, Keun-Joon; Putnam, Nicholas; Senger, Martin; Severin, Jessica; Shigemoto, Yasumasa; Sugawara, Hideaki; Taylor, James; Trelles, Oswaldo; Yamasaki, Chisato; Yamashita, Riu; Satoh, Noriyuki; Takagi, Toshihisa

2011-08-02

The interaction between biological researchers and the bioinformatics tools they use is still hampered by incomplete interoperability between such tools. To ensure interoperability initiatives are effectively deployed, end-user applications need to be aware of, and support, best practices and standards. Here, we report on an initiative in which software developers and genome biologists came together to explore and raise awareness of these issues: BioHackathon 2009. Developers in attendance came from diverse backgrounds, with experts in Web services, workflow tools, text mining and visualization. Genome biologists provided expertise and exemplar data from the domains of sequence and pathway analysis and glyco-informatics. One goal of the meeting was to evaluate the ability to address real world use cases in these domains using the tools that the developers represented. This resulted in i) a workflow to annotate 100,000 sequences from an invertebrate species; ii) an integrated system for analysis of the transcription factor binding sites (TFBSs) enriched based on differential gene expression data obtained from a microarray experiment; iii) a workflow to enumerate putative physical protein interactions among enzymes in a metabolic pathway using protein structure data; iv) a workflow to analyze glyco-gene-related diseases by searching for human homologs of glyco-genes in other species, such as fruit flies, and retrieving their phenotype-annotated SNPs. Beyond deriving prototype solutions for each use-case, a second major purpose of the BioHackathon was to highlight areas of insufficiency. We discuss the issues raised by our exploration of the problem/solution space, concluding that there are still problems with the way Web services are modeled and annotated, including: i) the absence of several useful data or analysis functions in the Web service "space"; ii) the lack of documentation of methods; iii) lack of compliance with the SOAP/WSDL specification among and between various programming-language libraries; and iv) incompatibility between various bioinformatics data formats. Although it was still difficult to solve real world problems posed to the developers by the biological researchers in attendance because of these problems, we note the promise of addressing these issues within a semantic framework.

Enhancing Interoperability Through Standard Procedures for Recording and Communicating Information on V&V Planning, Implementation and Results

DTIC Science & Technology

2003-11-01

are used in the ITOP [8], these are a “V&V cases” concept, a “claim-argument-evidence” structure, and a “ levels ” concept for the classification of M&S...obtained from the V&V effort. A levels concept assists in communication and understanding between parties in discussion. It also provides a convenient...piece of evidence obtained from the V&V effort. 13-9 Concepts behind the V&V ITOP document • A levels concept assists in communication and understanding

A Collaboration-Oriented M2M Messaging Mechanism for the Collaborative Automation between Machines in Future Industrial Networks

PubMed Central

Gray, John

2017-01-01

Machine-to-machine (M2M) communication is a key enabling technology for industrial internet of things (IIoT)-empowered industrial networks, where machines communicate with one another for collaborative automation and intelligent optimisation. This new industrial computing paradigm features high-quality connectivity, ubiquitous messaging, and interoperable interactions between machines. However, manufacturing IIoT applications have specificities that distinguish them from many other internet of things (IoT) scenarios in machine communications. By highlighting the key requirements and the major technical gaps of M2M in industrial applications, this article describes a collaboration-oriented M2M (CoM2M) messaging mechanism focusing on flexible connectivity and discovery, ubiquitous messaging, and semantic interoperability that are well suited for the production line-scale interoperability of manufacturing applications. The designs toward machine collaboration and data interoperability at both the communication and semantic level are presented. Then, the application scenarios of the presented methods are illustrated with a proof-of-concept implementation in the PicknPack food packaging line. Eventually, the advantages and some potential issues are discussed based on the PicknPack practice. PMID:29165347

Rollout Strategy to Implement Interoperable Traceability in the Seafood Industry.

PubMed

Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert; Cusack, Christopher

2017-08-01

Verifying the accuracy and rigor of data exchanged within and between businesses for the purposes of traceability rests on the existence of effective and efficient interoperable information systems that meet users' needs. Interoperability, particularly given the complexities intrinsic to the seafood industry, requires that the systems used by businesses operating along the supply chain share a common technology architecture that is robust, resilient, and evolves as industry needs change. Technology architectures are developed through engaging industry stakeholders in understanding why an architecture is required, the benefits provided to the industry and individual businesses and supply chains, and how the architecture will translate into practical results. This article begins by reiterating the benefits that the global seafood industry can capture by implementing interoperable chain-length traceability and the reason for basing the architecture on a peer-to-peer networked database concept versus more traditional centralized or linear approaches. A summary of capabilities that already exist within the seafood industry that the proposed architecture uses is discussed; and a strategy for implementing the architecture is presented. The 6-step strategy is presented in the form of a critical path. © 2017 Institute of Food Technologists®.

A review on digital ECG formats and the relationships between them.

PubMed

Trigo, Jesús Daniel; Alesanco, Alvaro; Martínez, Ignacio; García, José

2012-05-01

A plethora of digital ECG formats have been proposed and implemented. This heterogeneity hinders the design and development of interoperable systems and entails critical integration issues for the healthcare information systems. This paper aims at performing a comprehensive overview on the current state of affairs of the interoperable exchange of digital ECG signals. This includes 1) a review on existing digital ECG formats, 2) a collection of applications and cardiology settings using such formats, 3) a compilation of the relationships between such formats, and 4) a reflection on the current situation and foreseeable future of the interoperable exchange of digital ECG signals. The objectives have been approached by completing and updating previous reviews on the topic through appropriate database mining. 39 digital ECG formats, 56 applications, tools or implantation experiences, 47 mappings/converters, and 6 relationships between such formats have been found in the literature. The creation and generalization of a single standardized ECG format is a desirable goal. However, this unification requires political commitment and international cooperation among different standardization bodies. Ongoing ontology-based approaches covering ECG domain have recently emerged as a promising alternative for reaching fully fledged ECG interoperability in the near future.

Interoperability of Information Systems Managed and Used by the Local Health Departments.

PubMed

Shah, Gulzar H; Leider, Jonathon P; Luo, Huabin; Kaur, Ravneet

2016-01-01

In the post-Affordable Care Act era marked by interorganizational collaborations and availability of large amounts of electronic data from other community partners, it is imperative to assess the interoperability of information systems used by the local health departments (LHDs). To describe the level of interoperability of LHD information systems and identify factors associated with lack of interoperability. This mixed-methods research uses data from the 2015 Informatics Capacity and Needs Assessment Survey, with a target population of all LHDs in the United States. A representative sample of 650 LHDs was drawn using a stratified random sampling design. A total of 324 completed responses were received (50% response rate). Qualitative data were used from a key informant interview study of LHD informatics staff from across the United States. Qualitative data were independently coded by 2 researchers and analyzed thematically. Survey data were cleaned, bivariate comparisons were conducted, and a multivariable logistic regression was run to characterize factors associated with interoperability. For 30% of LHDs, no systems were interoperable, and 38% of LHD respondents indicated some of the systems were interoperable. Significant determinants of interoperability included LHDs having leadership support (adjusted odds ratio [AOR] = 3.54), control of information technology budget allocation (AOR = 2.48), control of data systems (AOR = 2.31), having a strategic plan for information systems (AOR = 1.92), and existence of business process analysis and redesign (AOR = 1.49). Interoperability of all systems may be an informatics goal, but only a small proportion of LHDs reported having interoperable systems, pointing to a substantial need among LHDs nationwide.

Open data models for smart health interconnected applications: the example of openEHR.

PubMed

Demski, Hans; Garde, Sebastian; Hildebrand, Claudia

2016-10-22

Smart Health is known as a concept that enhances networking, intelligent data processing and combining patient data with other parameters. Open data models can play an important role in creating a framework for providing interoperable data services that support the development of innovative Smart Health applications profiting from data fusion and sharing. This article describes a model-driven engineering approach based on standardized clinical information models and explores its application for the development of interoperable electronic health record systems. The following possible model-driven procedures were considered: provision of data schemes for data exchange, automated generation of artefacts for application development and native platforms that directly execute the models. The applicability of the approach in practice was examined using the openEHR framework as an example. A comprehensive infrastructure for model-driven engineering of electronic health records is presented using the example of the openEHR framework. It is shown that data schema definitions to be used in common practice software development processes can be derived from domain models. The capabilities for automatic creation of implementation artefacts (e.g., data entry forms) are demonstrated. Complementary programming libraries and frameworks that foster the use of open data models are introduced. Several compatible health data platforms are listed. They provide standard based interfaces for interconnecting with further applications. Open data models help build a framework for interoperable data services that support the development of innovative Smart Health applications. Related tools for model-driven application development foster semantic interoperability and interconnected innovative applications.

CCR+: Metadata Based Extended Personal Health Record Data Model Interoperable with the ASTM CCR Standard

PubMed Central

Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong

2014-01-01

Objectives Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Methods Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. Results In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. Conclusions A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models. PMID:24627817

Architecture of a consent management suite and integration into IHE-based Regional Health Information Networks.

PubMed

Heinze, Oliver; Birkle, Markus; Köster, Lennart; Bergh, Björn

2011-10-04

The University Hospital Heidelberg is implementing a Regional Health Information Network (RHIN) in the Rhine-Neckar-Region in order to establish a shared-care environment, which is based on established Health IT standards and in particular Integrating the Healthcare Enterprise (IHE). Similar to all other Electronic Health Record (EHR) and Personal Health Record (PHR) approaches the chosen Personal Electronic Health Record (PEHR) architecture relies on the patient's consent in order to share documents and medical data with other care delivery organizations, with the additional requirement that the German legislation explicitly demands a patients' opt-in and does not allow opt-out solutions. This creates two issues: firstly the current IHE consent profile does not address this approach properly and secondly none of the employed intra- and inter-institutional information systems, like almost all systems on the market, offers consent management solutions at all. Hence, the objective of our work is to develop and introduce an extensible architecture for creating, managing and querying patient consents in an IHE-based environment. Based on the features offered by the IHE profile Basic Patient Privacy Consent (BPPC) and literature, the functionalities and components to meet the requirements of a centralized opt-in consent management solution compliant with German legislation have been analyzed. Two services have been developed and integrated into the Heidelberg PEHR. The standard-based Consent Management Suite consists of two services. The Consent Management Service is able to receive and store consent documents. It can receive queries concerning a dedicated patient consent, process it and return an answer. It represents a centralized policy enforcement point. The Consent Creator Service allows patients to create their consents electronically. Interfaces to a Master Patient Index (MPI) and a provider index allow to dynamically generate XACML-based policies which are stored in a CDA document to be transferred to the first service. Three workflows have to be considered to integrate the suite into the PEHR: recording the consent, publishing documents and viewing documents. Our approach solves the consent issue when using IHE profiles for regional health information networks. It is highly interoperable due to the use of international standards and can hence be used in any other region to leverage consent issues and substantially promote the use of IHE for regional health information networks in general.

Architecture of a consent management suite and integration into IHE-based regional health information networks

PubMed Central

2011-01-01

Background The University Hospital Heidelberg is implementing a Regional Health Information Network (RHIN) in the Rhine-Neckar-Region in order to establish a shared-care environment, which is based on established Health IT standards and in particular Integrating the Healthcare Enterprise (IHE). Similar to all other Electronic Health Record (EHR) and Personal Health Record (PHR) approaches the chosen Personal Electronic Health Record (PEHR) architecture relies on the patient's consent in order to share documents and medical data with other care delivery organizations, with the additional requirement that the German legislation explicitly demands a patients' opt-in and does not allow opt-out solutions. This creates two issues: firstly the current IHE consent profile does not address this approach properly and secondly none of the employed intra- and inter-institutional information systems, like almost all systems on the market, offers consent management solutions at all. Hence, the objective of our work is to develop and introduce an extensible architecture for creating, managing and querying patient consents in an IHE-based environment. Methods Based on the features offered by the IHE profile Basic Patient Privacy Consent (BPPC) and literature, the functionalities and components to meet the requirements of a centralized opt-in consent management solution compliant with German legislation have been analyzed. Two services have been developed and integrated into the Heidelberg PEHR. Results The standard-based Consent Management Suite consists of two services. The Consent Management Service is able to receive and store consent documents. It can receive queries concerning a dedicated patient consent, process it and return an answer. It represents a centralized policy enforcement point. The Consent Creator Service allows patients to create their consents electronically. Interfaces to a Master Patient Index (MPI) and a provider index allow to dynamically generate XACML-based policies which are stored in a CDA document to be transferred to the first service. Three workflows have to be considered to integrate the suite into the PEHR: recording the consent, publishing documents and viewing documents. Conclusions Our approach solves the consent issue when using IHE profiles for regional health information networks. It is highly interoperable due to the use of international standards and can hence be used in any other region to leverage consent issues and substantially promote the use of IHE for regional health information networks in general. PMID:21970788

National electronic health record interoperability chronology.

PubMed

Hufnagel, Stephen P

2009-05-01

The federal initiative for electronic health record (EHR) interoperability began in 2000 and set the stage for the establishment of the 2004 Executive Order for EHR interoperability by 2014. This article discusses the chronology from the 2001 e-Government Consolidated Health Informatics (CHI) initiative through the current congressional mandates for an aligned, interoperable, and agile DoD AHLTA and VA VistA.

Resource allocation in shared spectrum access communications for operators with diverse service requirements

NASA Astrophysics Data System (ADS)

Kibria, Mirza Golam; Villardi, Gabriel Porto; Ishizu, Kentaro; Kojima, Fumihide; Yano, Hiroyuki

2016-12-01

In this paper, we study inter-operator spectrum sharing and intra-operator resource allocation in shared spectrum access communication systems and propose efficient dynamic solutions to address both inter-operator and intra-operator resource allocation optimization problems. For inter-operator spectrum sharing, we present two competent approaches, namely the subcarrier gain-based sharing and fragmentation-based sharing, which carry out fair and flexible allocation of the available shareable spectrum among the operators subject to certain well-defined sharing rules, traffic demands, and channel propagation characteristics. The subcarrier gain-based spectrum sharing scheme has been found to be more efficient in terms of achieved throughput. However, the fragmentation-based sharing is more attractive in terms of computational complexity. For intra-operator resource allocation, we consider resource allocation problem with users' dissimilar service requirements, where the operator supports users with delay constraint and non-delay constraint service requirements, simultaneously. This optimization problem is a mixed-integer non-linear programming problem and non-convex, which is computationally very expensive, and the complexity grows exponentially with the number of integer variables. We propose less-complex and efficient suboptimal solution based on formulating exact linearization, linear approximation, and convexification techniques for the non-linear and/or non-convex objective functions and constraints. Extensive simulation performance analysis has been carried out that validates the efficiency of the proposed solution.

Empowering open systems through cross-platform interoperability

NASA Astrophysics Data System (ADS)

Lyke, James C.

2014-06-01

Most of the motivations for open systems lie in the expectation of interoperability, sometimes referred to as "plug-and-play". Nothing in the notion of "open-ness", however, guarantees this outcome, which makes the increased interest in open architecture more perplexing. In this paper, we explore certain themes of open architecture. We introduce the concept of "windows of interoperability", which can be used to align disparate portions of architecture. Such "windows of interoperability", which concentrate on a reduced set of protocol and interface features, might achieve many of the broader purposes assigned as benefits in open architecture. Since it is possible to engineer proprietary systems that interoperate effectively, this nuanced definition of interoperability may in fact be a more important concept to understand and nurture for effective systems engineering and maintenance.

Community-Driven Initiatives to Achieve Interoperability for Ecological and Environmental Data

NASA Astrophysics Data System (ADS)

Madin, J.; Bowers, S.; Jones, M.; Schildhauer, M.

2007-12-01

Advances in ecology and environmental science increasingly depend on information from multiple disciplines to tackle broader and more complex questions about the natural world. Such advances, however, are hindered by data heterogeneity, which impedes the ability of researchers to discover, interpret, and integrate relevant data that have been collected by others. Here, we outline two community-building initiatives for improving data interoperability in the ecological and environmental sciences, one that is well-established (the Ecological Metadata Language [EML]), and another that is actively underway (a unified model for observations and measurements). EML is a metadata specification developed for the ecology discipline, and is based on prior work done by the Ecological Society of America and associated efforts to ensure a modular and extensible framework to document ecological data. EML "modules" are designed to describe one logical part of the total metadata that should be included with any ecological dataset. EML was developed through a series of working meetings, ongoing discussion forums and email lists, with participation from a broad range of ecological and environmental scientists, as well as computer scientists and software developers. Where possible, EML adopted syntax from the other metadata standards for other disciplines (e.g., Dublin Core, Content Standard for Digital Geospatial Metadata, and more). Although EML has not yet been ratified through a standards body, it has become the de facto metadata standard for a large range of ecological data management projects, including for the Long Term Ecological Research Network, the National Center for Ecological Analysis and Synthesis, and the Ecological Society of America. The second community-building initiative is based on work through the Scientific Environment for Ecological Knowledge (SEEK) as well as a recent workshop on multi-disciplinary data management. This initiative aims at improving interoperability by describing the semantics of data at the level of observation and measurement (rather than the traditional focus at the level of the data set) and will define the necessary specifications and technologies to facilitate semantic interpretation and integration of observational data for the environmental sciences. As such, this initiative will focus on unifying the various existing approaches for representing and describing observation data (e.g., SEEK's Observation Ontology, CUAHSI's Observation Data Model, NatureServe's Observation Data Standard, to name a few). Products of this initiative will be compatible with existing standards and build upon recent advances in knowledge representation (e.g., W3C's recommended Web Ontology Language, OWL) that have demonstrated practical utility in enhancing scientific communication and data interoperability in other communities (e.g., the genomics community). A community-sanctioned, extensible, and unified model for observational data will support metadata standards such as EML while reducing the "babel" of scientific dialects that currently impede effective data integration, which will in turn provide a strong foundation for enabling cross-disciplinary synthetic research in the ecological and environmental sciences.

Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes.

PubMed

Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

2015-05-01

The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Design and Implementation of e-Health System Based on Semantic Sensor Network Using IETF YANG.

PubMed

Jin, Wenquan; Kim, Do Hyeun

2018-02-20

Recently, healthcare services can be delivered effectively to patients anytime and anywhere using e-Health systems. e-Health systems are developed through Information and Communication Technologies (ICT) that involve sensors, mobiles, and web-based applications for the delivery of healthcare services and information. Remote healthcare is an important purpose of the e-Health system. Usually, the eHealth system includes heterogeneous sensors from diverse manufacturers producing data in different formats. Device interoperability and data normalization is a challenging task that needs research attention. Several solutions are proposed in the literature based on manual interpretation through explicit programming. However, programmatically implementing the interpretation of the data sender and data receiver in the e-Health system for the data transmission is counterproductive as modification will be required for each new device added into the system. In this paper, an e-Health system with the Semantic Sensor Network (SSN) is proposed to address the device interoperability issue. In the proposed system, we have used IETF YANG for modeling the semantic e-Health data to represent the information of e-Health sensors. This modeling scheme helps in provisioning semantic interoperability between devices and expressing the sensing data in a user-friendly manner. For this purpose, we have developed an ontology for e-Health data that supports different styles of data formats. The ontology is defined in YANG for provisioning semantic interpretation of sensing data in the system by constructing meta-models of e-Health sensors. The proposed approach assists in the auto-configuration of eHealth sensors and querying the sensor network with semantic interoperability support for the e-Health system.

Design and Implementation of e-Health System Based on Semantic Sensor Network Using IETF YANG

PubMed Central

Kim, Do Hyeun

2018-01-01

Recently, healthcare services can be delivered effectively to patients anytime and anywhere using e-Health systems. e-Health systems are developed through Information and Communication Technologies (ICT) that involve sensors, mobiles, and web-based applications for the delivery of healthcare services and information. Remote healthcare is an important purpose of the e-Health system. Usually, the eHealth system includes heterogeneous sensors from diverse manufacturers producing data in different formats. Device interoperability and data normalization is a challenging task that needs research attention. Several solutions are proposed in the literature based on manual interpretation through explicit programming. However, programmatically implementing the interpretation of the data sender and data receiver in the e-Health system for the data transmission is counterproductive as modification will be required for each new device added into the system. In this paper, an e-Health system with the Semantic Sensor Network (SSN) is proposed to address the device interoperability issue. In the proposed system, we have used IETF YANG for modeling the semantic e-Health data to represent the information of e-Health sensors. This modeling scheme helps in provisioning semantic interoperability between devices and expressing the sensing data in a user-friendly manner. For this purpose, we have developed an ontology for e-Health data that supports different styles of data formats. The ontology is defined in YANG for provisioning semantic interpretation of sensing data in the system by constructing meta-models of e-Health sensors. The proposed approach assists in the auto-configuration of eHealth sensors and querying the sensor network with semantic interoperability support for the e-Health system. PMID:29461493

CINTEX: International Interoperability Extensions to EOSDIS

NASA Technical Reports Server (NTRS)

Graves, Sara J.

1997-01-01

A large part of the research under this cooperative agreement involved working with representatives of the DLR, NASDA, EDC, and NOAA-SAA data centers to propose a set of enhancements and additions to the EOSDIS Version 0 Information Management System (V0 IMS) Client/Server Message Protocol. Helen Conover of ITSL led this effort to provide for an additional geographic search specification (WRS Path/Row), data set- and data center-specific search criteria, search by granule ID, specification of data granule subsetting requests, data set-based ordering, and the addition of URLs to result messages. The V0 IMS Server Cookbook is an evolving document, providing resources and information to data centers setting up a VO IMS Server. Under this Cooperative Agreement, Helen Conover revised, reorganized, and expanded this document, and converted it to HTML. Ms. Conover has also worked extensively with the IRE RAS data center, CPSSI, in Russia. She served as the primary IMS contact for IRE-CPSSI and as IRE-CPSSI's liaison to other members of IMS and Web Gateway (WG) development teams. Her documentation of IMS problems in the IRE environment (Sun servers and low network bandwidth) led to a general restructuring of the V0 IMS Client message polling system. to the benefit of all IMS participants. In addition to the IMS server software and documentation. which are generally available to CINTEX sites, Ms. Conover also provided database design documentation and consulting, order tracking software, and hands-on testing and debug assistance to IRE. In the final pre-operational phase of IRE-CPSSI development, she also supplied information on configuration management, including ideas and processes in place at the Global Hydrology Resource Center (GHRC), an EOSDIS data center operated by ITSL.

Foundations of reusable and interoperable facet models using category theory

PubMed Central

2016-01-01

Faceted browsing has become ubiquitous with modern digital libraries and online search engines, yet the process is still difficult to abstractly model in a manner that supports the development of interoperable and reusable interfaces. We propose category theory as a theoretical foundation for faceted browsing and demonstrate how the interactive process can be mathematically abstracted. Existing efforts in facet modeling are based upon set theory, formal concept analysis, and light-weight ontologies, but in many regards, they are implementations of faceted browsing rather than a specification of the basic, underlying structures and interactions. We will demonstrate that category theory allows us to specify faceted objects and study the relationships and interactions within a faceted browsing system. Resulting implementations can then be constructed through a category-theoretic lens using these models, allowing abstract comparison and communication that naturally support interoperability and reuse. PMID:27942248

Combining Archetypes with Fast Health Interoperability Resources in Future-proof Health Information Systems.

PubMed

Bosca, Diego; Moner, David; Maldonado, Jose Alberto; Robles, Montserrat

2015-01-01

Messaging standards, and specifically HL7 v2, are heavily used for the communication and interoperability of Health Information Systems. HL7 FHIR was created as an evolution of the messaging standards to achieve semantic interoperability. FHIR is somehow similar to other approaches like the dual model methodology as both are based on the precise modeling of clinical information. In this paper, we demonstrate how we can apply the dual model methodology to standards like FHIR. We show the usefulness of this approach for data transformation between FHIR and other specifications such as HL7 CDA, EN ISO 13606, and openEHR. We also discuss the advantages and disadvantages of defining archetypes over FHIR, and the consequences and outcomes of this approach. Finally, we exemplify this approach by creating a testing data server that supports both FHIR resources and archetypes.

Developing Interoperable Air Quality Community Portals

NASA Astrophysics Data System (ADS)

Falke, S. R.; Husar, R. B.; Yang, C. P.; Robinson, E. M.; Fialkowski, W. E.

2009-04-01

Web portals are intended to provide consolidated discovery, filtering and aggregation of content from multiple, distributed web sources targeted at particular user communities. This paper presents a standards-based information architectural approach to developing portals aimed at air quality community collaboration in data access and analysis. An important characteristic of the approach is to advance beyond the present stand-alone design of most portals to achieve interoperability with other portals and information sources. We show how using metadata standards, web services, RSS feeds and other Web 2.0 technologies, such as Yahoo! Pipes and del.icio.us, helps increase interoperability among portals. The approach is illustrated within the context of the GEOSS Architecture Implementation Pilot where an air quality community portal is being developed to provide a user interface between the portals and clearinghouse of the GEOSS Common Infrastructure and the air quality community catalog of metadata and data services.

Economic impact of a nationwide interoperable e-Health system using the PENG evaluation tool.

PubMed

Parv, L; Saluse, J; Aaviksoo, A; Tiik, M; Sepper, R; Ross, P

2012-01-01

The aim of this paper is to evaluate the costs and benefits of the Estonian interoperable health information exchange system. In addition, a framework will be built for follow-up monitoring and analysis of a nationwide HIE system. PENG evaluation tool was used to map and quantify the costs and benefits arising from type II diabetic patient management for patients, providers and the society. The analysis concludes with a quantification based on real costs and potential benefits identified by a panel of experts. Setting up a countrywide interoperable eHealth system incurs a large initial investment. However, if the system is working seamlessly, benefits will surpass costs within three years. The results show that while the society stands to benefit the most, the costs will be mainly borne by the healthcare providers. Therefore, new government policies should be devised to encourage providers to invest to ensure society wide benefits.

Interoperability Matter: Levels of Data Sharing, Starting from a 3d Information Modelling

NASA Astrophysics Data System (ADS)

Tommasi, C.; Achille, C.

2017-02-01

Nowadays, the adoption of BIM processes in the AEC (Architecture, Engineering and Construction) industry means to be oriented towards synergistic workflows, based on informative instruments capable of realizing the virtual model of the building. The target of this article is to speak about the interoperability matter, approaching the subject through a theoretical part and also a practice example, in order to show how these notions are applicable in real situations. In particular, the case study analysed belongs to the Cultural Heritage field, where it is possible to find some difficulties - both in the modelling and sharing phases - due to the complexity of shapes and elements. Focusing on the interoperability between different software, the questions are: What and how many kind of information can I share? Given that this process leads also to a standardization of the modelled parts, is there the possibility of an accuracy loss?

Managing Interoperability for GEOSS - A Report from the SIF

NASA Astrophysics Data System (ADS)

Khalsa, S. J.; Actur, D.; Nativi, S.; Browdy, S.; Eglitis, P.

2009-04-01

The Global Earth Observation System of Systems (GEOSS) is a coordinating and integrating framework for Earth observing and information systems, which are contributed on a voluntary basis by Members and Participating Organizations of the intergovernmental Group on Earth Observations (GEO). GEOSS exists to support informed decision making for the benefit of society, including the implementation of international environmental treaty obligations. GEO Members and Participating organizations use the GEOSS Common Infrastructure (GCI) to register their Earth observation resources, thereby making them discoverable and consumable by both humans and client applications. Essential to meeting GEO user needs is a process for supporting interoperability of observing, processing, modeling and dissemination capabilities. The GEO Standards and Interoperability Forum (SIF) was created to develop, implement and oversee this process. The SIF supports GEO organizations contributing resources to the GEOSS by helping them understand and work with the GEOSS interoperability guidelines and encouraging them to register their "interoperability arrangements" (standards or other ad hoc arrangements for interoperability) in the GEOSS standards registry, which is part of the GCI. These registered interoperability arrangements support the actual services used to achieve interoperability of systems. By making information about these interoperability arrangements available to users of the GEOSS the SIF enhances the understanding and utility of contributed resources. We describe the procedures that the SIF has enacted to carry out its work. To operate effectively the SIF uses a workflow system and is establishing a set of regional teams and domain experts. In the near term our work has focused on population and review of the GEOSS Standards Registry, but we are also developing approaches to achieving progressive convergence on, and uptake of, an optimal set of interoperability arrangements for all of GEOSS.

Interoperability of Information Systems Managed and Used by the Local Health Departments

PubMed Central

Leider, Jonathon P.; Luo, Huabin; Kaur, Ravneet

2016-01-01

Background: In the post-Affordable Care Act era marked by interorganizational collaborations and availability of large amounts of electronic data from other community partners, it is imperative to assess the interoperability of information systems used by the local health departments (LHDs). Objectives: To describe the level of interoperability of LHD information systems and identify factors associated with lack of interoperability. Data and Methods: This mixed-methods research uses data from the 2015 Informatics Capacity and Needs Assessment Survey, with a target population of all LHDs in the United States. A representative sample of 650 LHDs was drawn using a stratified random sampling design. A total of 324 completed responses were received (50% response rate). Qualitative data were used from a key informant interview study of LHD informatics staff from across the United States. Qualitative data were independently coded by 2 researchers and analyzed thematically. Survey data were cleaned, bivariate comparisons were conducted, and a multivariable logistic regression was run to characterize factors associated with interoperability. Results: For 30% of LHDs, no systems were interoperable, and 38% of LHD respondents indicated some of the systems were interoperable. Significant determinants of interoperability included LHDs having leadership support (adjusted odds ratio [AOR] = 3.54), control of information technology budget allocation (AOR = 2.48), control of data systems (AOR = 2.31), having a strategic plan for information systems (AOR = 1.92), and existence of business process analysis and redesign (AOR = 1.49). Conclusion: Interoperability of all systems may be an informatics goal, but only a small proportion of LHDs reported having interoperable systems, pointing to a substantial need among LHDs nationwide. PMID:27684616

Principles of Automation for Patient Safety in Intensive Care: Learning From Aviation.

PubMed

Dominiczak, Jason; Khansa, Lara

2018-06-01

The transition away from written documentation and analog methods has opened up the possibility of leveraging data science and analytic techniques to improve health care. In the implementation of data science techniques and methodologies, high-acuity patients in the ICU can particularly benefit. The Principles of Automation for Patient Safety in Intensive Care (PASPIC) framework draws on Billings's principles of human-centered aviation (HCA) automation and helps in identifying the advantages, pitfalls, and unintended consequences of automation in health care. Billings's HCA principles are based on the premise that human operators must remain "in command," so that they are continuously informed and actively involved in all aspects of system operations. In addition, automated systems need to be predictable, simple to train, to learn, and to operate, and must be able to monitor the human operators, and every intelligent system element must know the intent of other intelligent system elements. In applying Billings's HCA principles to the ICU setting, PAPSIC has three key characteristics: (1) integration and better interoperability, (2) multidimensional analysis, and (3) enhanced situation awareness. PAPSIC suggests that health care professionals reduce overreliance on automation and implement "cooperative automation" and that vendors reduce mode errors and embrace interoperability. Much can be learned from the aviation industry in automating the ICU. Because it combines "smart" technology with the necessary controls to withstand unintended consequences, PAPSIC could help ensure more informed decision making in the ICU and better patient care. Copyright © 2018 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Approaching semantic interoperability in Health Level Seven

PubMed Central

Alschuler, Liora

2010-01-01

‘Semantic Interoperability’ is a driving objective behind many of Health Level Seven's standards. The objective in this paper is to take a step back, and consider what semantic interoperability means, assess whether or not it has been achieved, and, if not, determine what concrete next steps can be taken to get closer. A framework for measuring semantic interoperability is proposed, using a technique called the ‘Single Logical Information Model’ framework, which relies on an operational definition of semantic interoperability and an understanding that interoperability improves incrementally. Whether semantic interoperability tomorrow will enable one computer to talk to another, much as one person can talk to another person, is a matter for speculation. It is assumed, however, that what gets measured gets improved, and in that spirit this framework is offered as a means to improvement. PMID:21106995

Gaps Analysis of Integrating Product Design, Manufacturing, and Quality Data in The Supply Chain Using Model-Based Definition

PubMed Central

Trainer, Asa; Hedberg, Thomas; Feeney, Allison Barnard; Fischer, Kevin; Rosche, Phil

2017-01-01

Advances in information technology triggered a digital revolution that holds promise of reduced costs, improved productivity, and higher quality. To ride this wave of innovation, manufacturing enterprises are changing how product definitions are communicated – from paper to models. To achieve industry's vision of the Model-Based Enterprise (MBE), the MBE strategy must include model-based data interoperability from design to manufacturing and quality in the supply chain. The Model-Based Definition (MBD) is created by the original equipment manufacturer (OEM) using Computer-Aided Design (CAD) tools. This information is then shared with the supplier so that they can manufacture and inspect the physical parts. Today, suppliers predominantly use Computer-Aided Manufacturing (CAM) and Coordinate Measuring Machine (CMM) models for these tasks. Traditionally, the OEM has provided design data to the supplier in the form of two-dimensional (2D) drawings, but may also include a three-dimensional (3D)-shape-geometry model, often in a standards-based format such as ISO 10303-203:2011 (STEP AP203). The supplier then creates the respective CAM and CMM models and machine programs to produce and inspect the parts. In the MBE vision for model-based data exchange, the CAD model must include product-and-manufacturing information (PMI) in addition to the shape geometry. Today's CAD tools can generate models with embedded PMI. And, with the emergence of STEP AP242, a standards-based model with embedded PMI can now be shared downstream. The on-going research detailed in this paper seeks to investigate three concepts. First, that the ability to utilize a STEP AP242 model with embedded PMI for CAD-to-CAM and CAD-to-CMM data exchange is possible and valuable to the overall goal of a more efficient process. Second, the research identifies gaps in tools, standards, and processes that inhibit industry's ability to cost-effectively achieve model-based-data interoperability in the pursuit of the MBE vision. Finally, it also seeks to explore the interaction between CAD and CMM processes and determine if the concept of feedback from CAM and CMM back to CAD is feasible. The main goal of our study is to test the hypothesis that model-based-data interoperability from CAD-to-CAM and CAD-to-CMM is feasible through standards-based integration. This paper presents several barriers to model-based-data interoperability. Overall, the project team demonstrated the exchange of product definition data between CAD, CAM, and CMM systems using standards-based methods. While gaps in standards coverage were identified, the gaps should not stop industry's progress toward MBE. The results of our study provide evidence in support of an open-standards method to model-based-data interoperability, which would provide maximum value and impact to industry. PMID:28691120

OSI for hardware/software interoperability

NASA Astrophysics Data System (ADS)

Wood, Richard J.; Harvey, Donald L.; Linderman, Richard W.; Gardener, Gary A.; Capraro, Gerard T.

1994-03-01

There is a need in public safety for real-time data collection and transmission from one or more sensors. The Rome Laboratory and the Ballistic Missile Defense Organization are pursuing an effort to bring the benefits of Open System Architectures (OSA) to embedded systems within the Department of Defense. When developed properly OSA provides interoperability, commonality, graceful upgradeability, survivability and hardware/software transportability to greatly minimize life cycle costs, integration and supportability. Architecture flexibility can be achieved to take advantage of commercial accomplishments by basing these developments on vendor-neutral commercially accepted standards and protocols.

PACS/information systems interoperability using Enterprise Communication Framework.

PubMed

alSafadi, Y; Lord, W P; Mankovich, N J

1998-06-01

Interoperability among healthcare applications goes beyond connectivity to allow components to exchange structured information and work together in a predictable, coordinated fashion. To facilitate building an interoperability infrastructure, an Enterprise Communication Framework (ECF) was developed by the members of the Andover Working Group for Healthcare Interoperability (AWG-OHI). The ECF consists of four models: 1) Use Case Model, 2) Domain Information Model (DIM), 3) Interaction Model, and 4) Message Model. To realize this framework, a software component called the Enterprise Communicator (EC) is used. In this paper, we will demonstrate the use of the framework in interoperating a picture archiving and communication system (PACS) with a radiology information system (RIS).

Latest developments for the IAGOS database: Interoperability and metadata

NASA Astrophysics Data System (ADS)

Boulanger, Damien; Gautron, Benoit; Thouret, Valérie; Schultz, Martin; van Velthoven, Peter; Broetz, Bjoern; Rauthe-Schöch, Armin; Brissebrat, Guillaume

2014-05-01

In-service Aircraft for a Global Observing System (IAGOS, http://www.iagos.org) aims at the provision of long-term, frequent, regular, accurate, and spatially resolved in situ observations of the atmospheric composition. IAGOS observation systems are deployed on a fleet of commercial aircraft. The IAGOS database is an essential part of the global atmospheric monitoring network. Data access is handled by open access policy based on the submission of research requests which are reviewed by the PIs. Users can access the data through the following web sites: http://www.iagos.fr or http://www.pole-ether.fr as the IAGOS database is part of the French atmospheric chemistry data centre ETHER (CNES and CNRS). The database is in continuous development and improvement. In the framework of the IGAS project (IAGOS for GMES/COPERNICUS Atmospheric Service), major achievements will be reached, such as metadata and format standardisation in order to interoperate with international portals and other databases, QA/QC procedures and traceability, CARIBIC (Civil Aircraft for the Regular Investigation of the Atmosphere Based on an Instrument Container) data integration within the central database, and the real-time data transmission. IGAS work package 2 aims at providing the IAGOS data to users in a standardized format including the necessary metadata and information on data processing, data quality and uncertainties. We are currently redefining and standardizing the IAGOS metadata for interoperable use within GMES/Copernicus. The metadata are compliant with the ISO 19115, INSPIRE and NetCDF-CF conventions. IAGOS data will be provided to users in NetCDF or NASA Ames format. We also are implementing interoperability between all the involved IAGOS data services, including the central IAGOS database, the former MOZAIC and CARIBIC databases, Aircraft Research DLR database and the Jülich WCS web application JOIN (Jülich OWS Interface) which combines model outputs with in situ data for intercomparison. The optimal data transfer protocol is being investigated to insure the interoperability. To facilitate satellite and model validation, tools will be made available for co-location and comparison with IAGOS. We will enhance the JOIN application in order to properly display aircraft data as vertical profiles and along individual flight tracks and to allow for graphical comparison to model results that are accessible through interoperable web services, such as the daily products from the GMES/Copernicus atmospheric service.

Modeling Interoperable Information Systems with 3LGM² and IHE.

PubMed

Stäubert, S; Schaaf, M; Jahn, F; Brandner, R; Winter, A

2015-01-01

Strategic planning of information systems (IS) in healthcare requires descriptions of the current and the future IS state. Enterprise architecture planning (EAP) tools like the 3LGM² tool help to build up and to analyze IS models. A model of the planned architecture can be derived from an analysis of current state IS models. Building an interoperable IS, i. e. an IS consisting of interoperable components, can be considered a relevant strategic information management goal for many IS in healthcare. Integrating the healthcare enterprise (IHE) is an initiative which targets interoperability by using established standards. To link IHE concepts to 3LGM² concepts within the 3LGM² tool. To describe how an information manager can be supported in handling the complex IHE world and planning interoperable IS using 3LGM² models. To describe how developers or maintainers of IHE profiles can be supported by the representation of IHE concepts in 3LGM². Conceptualization and concept mapping methods are used to assign IHE concepts such as domains, integration profiles actors and transactions to the concepts of the three-layer graph-based meta-model (3LGM²). IHE concepts were successfully linked to 3LGM² concepts. An IHE-master-model, i. e. an abstract model for IHE concepts, was modeled with the help of 3LGM² tool. Two IHE domains were modeled in detail (ITI, QRPH). We describe two use cases for the representation of IHE concepts and IHE domains as 3LGM² models. Information managers can use the IHE-master-model as reference model for modeling interoperable IS based on IHE profiles during EAP activities. IHE developers are supported in analyzing consistency of IHE concepts with the help of the IHE-master-model and functions of the 3LGM² tool The complex relations between IHE concepts can be modeled by using the EAP method 3LGM². 3LGM² tool offers visualization and analysis features which are now available for the IHE-master-model. Thus information managers and IHE developers can use or develop IHE profiles systematically. In order to improve the usability and handling of the IHE-master-model and its usage as a reference model, some further refinements have to be done. Evaluating the use of the IHE-master-model by information managers and IHE developers is subject to further research.

Building a portable data and information interoperability infrastructure-framework for a standard Taiwan Electronic Medical Record Template.

PubMed

Jian, Wen-Shan; Hsu, Chien-Yeh; Hao, Te-Hui; Wen, Hsyien-Chia; Hsu, Min-Huei; Lee, Yen-Liang; Li, Yu-Chuan; Chang, Polun

2007-11-01

Traditional electronic health record (EHR) data are produced from various hospital information systems. They could not have existed independently without an information system until the incarnation of XML technology. The interoperability of a healthcare system can be divided into two dimensions: functional interoperability and semantic interoperability. Currently, no single EHR standard exists that provides complete EHR interoperability. In order to establish a national EHR standard, we developed a set of local EHR templates. The Taiwan Electronic Medical Record Template (TMT) is a standard that aims to achieve semantic interoperability in EHR exchanges nationally. The TMT architecture is basically composed of forms, components, sections, and elements. Data stored in the elements which can be referenced by the code set, data type, and narrative block. The TMT was established with the following requirements in mind: (1) transformable to international standards; (2) having a minimal impact on the existing healthcare system; (3) easy to implement and deploy, and (4) compliant with Taiwan's current laws and regulations. The TMT provides a basis for building a portable, interoperable information infrastructure for EHR exchange in Taiwan.

The Osseus platform: a prototype for advanced web-based distributed simulation

NASA Astrophysics Data System (ADS)

Franceschini, Derrick; Riecken, Mark

2016-05-01

Recent technological advances in web-based distributed computing and database technology have made possible a deeper and more transparent integration of some modeling and simulation applications. Despite these advances towards true integration of capabilities, disparate systems, architectures, and protocols will remain in the inventory for some time to come. These disparities present interoperability challenges for distributed modeling and simulation whether the application is training, experimentation, or analysis. Traditional approaches call for building gateways to bridge between disparate protocols and retaining interoperability specialists. Challenges in reconciling data models also persist. These challenges and their traditional mitigation approaches directly contribute to higher costs, schedule delays, and frustration for the end users. Osseus is a prototype software platform originally funded as a research project by the Defense Modeling & Simulation Coordination Office (DMSCO) to examine interoperability alternatives using modern, web-based technology and taking inspiration from the commercial sector. Osseus provides tools and services for nonexpert users to connect simulations, targeting the time and skillset needed to successfully connect disparate systems. The Osseus platform presents a web services interface to allow simulation applications to exchange data using modern techniques efficiently over Local or Wide Area Networks. Further, it provides Service Oriented Architecture capabilities such that finer granularity components such as individual models can contribute to simulation with minimal effort.

Secure and interoperable communication infrastructures for PPDR organisations

NASA Astrophysics Data System (ADS)

Müller, Wilmuth; Marques, Hugo; Pereira, Luis; Rodriguez, Jonathan; Brouwer, Frank; Bouwers, Bert; Politis, Ilias; Lykourgiotis, Asimakis; Ladas, Alexandros; Adigun, Olayinka; Jelenc, David

2016-05-01

The growing number of events affecting public safety and security (PS&S) on a regional scale with potential to grow up to large scale cross border disasters puts an increased pressure on agencies and organisation responsible for PS&S. In order to respond timely and in an adequate manner to such events, Public Protection and Disaster Relief (PPDR) organisations need to cooperate, align their procedures and activities, share the needed information and be interoperable. Existing PPDR/PMR technologies such as TETRA, TETRAPOL or P25, do not currently provide broadband capability nor is expected such technologies to be upgraded in the future. This presents a major limitation in supporting new services and information flows. Furthermore, there is no known standard that addresses interoperability of these technologies. In this contribution the design of a next generation communication infrastructure for PPDR organisations which fulfills the requirements of secure and seamless end-to-end communication and interoperable information exchange within the deployed communication networks is presented. Based on Enterprise Architecture of PPDR organisations, a next generation PPDR network that is backward compatible with legacy communication technologies is designed and implemented, capable of providing security, privacy, seamless mobility, QoS and reliability support for mission-critical Private Mobile Radio (PMR) voice and broadband data services. The designed solution provides a robust, reliable, and secure mobile broadband communications system for a wide variety of PMR applications and services on PPDR broadband networks, including the ability of inter-system, interagency and cross-border operations with emphasis on interoperability between users in PMR and LTE.

A semantically-aided architecture for a web-based monitoring system for carotid atherosclerosis.

PubMed

Kolias, Vassileios D; Stamou, Giorgos; Golemati, Spyretta; Stoitsis, Giannis; Gkekas, Christos D; Liapis, Christos D; Nikita, Konstantina S

2015-08-01

Carotid atherosclerosis is a multifactorial disease and its clinical diagnosis depends on the evaluation of heterogeneous clinical data, such as imaging exams, biochemical tests and the patient's clinical history. The lack of interoperability between Health Information Systems (HIS) does not allow the physicians to acquire all the necessary data for the diagnostic process. In this paper, a semantically-aided architecture is proposed for a web-based monitoring system for carotid atherosclerosis that is able to gather and unify heterogeneous data with the use of an ontology and to create a common interface for data access enhancing the interoperability of HIS. The architecture is based on an application ontology of carotid atherosclerosis that is used to (a) integrate heterogeneous data sources on the basis of semantic representation and ontological reasoning and (b) access the critical information using SPARQL query rewriting and ontology-based data access services. The architecture was tested over a carotid atherosclerosis dataset consisting of the imaging exams and the clinical profile of 233 patients, using a set of complex queries, constructed by the physicians. The proposed architecture was evaluated with respect to the complexity of the queries that the physicians could make and the retrieval speed. The proposed architecture gave promising results in terms of interoperability, data integration of heterogeneous sources with an ontological way and expanded capabilities of query and retrieval in HIS.

System and methods of resource usage using an interoperable management framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heileman, Gregory L.; Jamkhedkar, Pramod A.; Lamb, Christopher C.

Generic rights expression language allowing interoperability across different computing environments including resource usage of different applications. A formal framework for usage management provides scaffolding upon which interoperable usage management systems can be built. Certain features of the framework are standardized, such as the operational semantics, including areas free of standards that necessitate choice and innovation to achieve a balance of flexibility and usability for interoperability in usage management systems.

Information Management Challenges in Achieving Coalition Interoperability

DTIC Science & Technology

2001-12-01

by J. Dyer SESSION I: ARCHITECTURES AND STANDARDS: FUNDAMENTAL ISSUES Chairman: Dr I. WHITE (UK) Planning for Interoperability 1 by W.M. Gentleman...framework – a crucial step toward achieving coalition C4I interoperability. TOPICS TO BE COVERED: 1 ) Maintaining secure interoperability 2) Command...d’une coalition. SUJETS À EXAMINER : 1 ) Le maintien d’une interopérabilité sécurisée 2) Les interfaces des systèmes de commandement : 2a

Space Network Interoperability Panel (SNIP) study

NASA Technical Reports Server (NTRS)

Ryan, Thomas; Lenhart, Klaus; Hara, Hideo

1991-01-01

The Space Network Interoperability Panel (SNIP) study is a tripartite study that involves the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the National Space Development Agency (NASDA) of Japan. SNIP involves an ongoing interoperability study of the Data Relay Satellite (DRS) Systems of the three organizations. The study is broken down into two parts; Phase one deals with S-band (2 GHz) interoperability and Phase two deals with Ka-band (20/30 GHz) interoperability (in addition to S-band). In 1987 the SNIP formed a Working Group to define and study operations concepts and technical subjects to assure compatibility of the international data relay systems. Since that time a number of Panel and Working Group meetings have been held to continue the study. Interoperability is of interest to the three agencies because it offers a number of potential operation and economic benefits. This paper presents the history and status of the SNIP study.

Implementing Interoperability in the Seafood Industry: Learning from Experiences in Other Sectors.

PubMed

Bhatt, Tejas; Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert

2017-08-01

Interoperability of communication and information technologies within and between businesses operating along supply chains is being pursued and implemented in numerous industries worldwide to increase the efficiency and effectiveness of operations. The desire for greater interoperability is also driven by the need to reduce business risk through more informed management decisions. Interoperability is achieved by the development of a technology architecture that guides the design and implementation of communication systems existing within individual businesses and between businesses comprising the supply chain. Technology architectures are developed through a purposeful dialogue about why the architecture is required, the benefits and opportunities that the architecture offers the industry, and how the architecture will translate into practical results. An assessment of how the finance, travel, and health industries and a sector of the food industry-fresh produce-have implemented interoperability was conducted to identify lessons learned that can aid the development of interoperability in the seafood industry. The findings include identification of the need for strong, effective governance during the establishment and operation of an interoperability initiative to ensure the existence of common protocols and standards. The resulting insights were distilled into a series of principles for enabling syntactic and semantic interoperability in any industry, which we summarize in this article. Categorized as "structural," "operational," and "integrative," the principles describe requirements and solutions that are pivotal to enabling businesses to create and capture value from full chain interoperability. The principles are also fundamental to allowing governments and advocacy groups to use traceability for public good. © 2017 Institute of Food Technologists®.

Lowering Entry Barriers for Multidisciplinary Cyber(e)-Infrastructures

NASA Astrophysics Data System (ADS)

Nativi, S.

2012-04-01

Multidisciplinarity is more and more important to study the Earth System and address Global Changes. To achieve that, multidisciplinary cyber(e)-infrastructures are an important instrument. In the last years, several European, US and international initiatives have been started to carry out multidisciplinary infrastructures, including: the Spatial Information in the European Community (INSPIRE), the Global Monitoring for Environment and Security (GMES), the Data Observation Network for Earth (DataOne), and the Global Earth Observation System of Systems (GEOSS). The majority of these initiatives are developing service-based digital infrastructures asking scientific Communities (i.e. disciplinary Users and data Producers) to implement a set of standards for information interoperability. For scientific Communities, this has represented an entry barrier which has proved to be high, in several cases. In fact, both data Producers and Users do not seem to be willing to invest precious resources to become expert on interoperability solutions -on the contrary, they are focused on developing disciplinary and thematic capacities. Therefore, an important research topic is lowering entry barriers for joining multidisciplinary cyber(e)-Infrastructures. This presentation will introduce a new approach to achieve multidisciplinary interoperability underpinning multidisciplinary infrastructures and lowering the present entry barriers for both Users and data Producers. This is called the Brokering approach: it extends the service-based paradigm by introducing a new a Brokering layer or cloud which is in charge of managing all the interoperability complexity (e.g. data discovery, access, and use) thus easing Users' and Producers' burden. This approach was successfully experimented in the framework of several European FP7 Projects and in GEOSS.

Archetype-based electronic health records: a literature review and evaluation of their applicability to health data interoperability and access.

PubMed

Wollersheim, Dennis; Sari, Anny; Rahayu, Wenny

Health Information Managers (HIMs) are responsible for overseeing health information. The change management necessary during the transition to electronic health records (EHR) is substantial, and ongoing. Archetype-based EHRs are a core health information system component which solve many of the problems that arise during this period of change. Archetypes are models of clinical content, and they have many beneficial properties. They are interoperable, both between settings and through time. They are more amenable to change than conventional paradigms, and their design is congruent with clinical practice. This paper is an overview of the current archetype literature relevant to Health Information Managers. The literature was sourced in the English language sections of ScienceDirect, IEEE Explore, Pubmed, Google Scholar, ACM Digital library and other databases on the usage of archetypes for electronic health record storage, looking at the current areas of archetype research, appropriate usage, and future research. We also used reference lists from the cited papers, papers referenced by the openEHR website, and the recommendations from experts in the area. Criteria for inclusion were (a) if studies covered archetype research and (b) were either studies of archetype use, archetype system design, or archetype effectiveness. The 47 papers included show a wide and increasing worldwide archetype usage, in a variety of medical domains. Most of the papers noted that archetypes are an appropriate solution for future-proof and interoperable medical data storage. We conclude that archetypes are a suitable solution for the complex problem of electronic health record storage and interoperability.

a Virtual Hub Brokering Approach for Integration of Historical and Modern Maps

NASA Astrophysics Data System (ADS)

Bruno, N.; Previtali, M.; Barazzetti, L.; Brumana, R.; Roncella, R.

2016-06-01

Geospatial data are today more and more widespread. Many different institutions, such as Geographical Institutes, Public Administrations, collaborative communities (e.g., OSM) and web companies, make available nowadays a large number of maps. Besides this cartography, projects of digitizing, georeferencing and web publication of historical maps have increasingly spread in the recent years. In spite of these variety and availability of data, information overload makes difficult their discovery and management: without knowing the specific repository where the data are stored, it is difficult to find the information required and problems of interconnection between different data sources and their restricted interoperability limit a wide utilization of available geo-data. This paper aims to describe some actions performed to assure interoperability between data, in particular spatial and geographic data, gathered from different data providers, with different features and referring to different historical periods. The article summarizes and exemplifies how, starting from projects of historical map digitizing and Historical GIS implementation, respectively for the Lombardy and for the city of Parma, the interoperability is possible in the framework of the ENERGIC OD project. The European project ENERGIC OD, thanks to a specific component - the virtual hub - based on a brokering framework, copes with the previous listed problems and allows the interoperability between different data sources.

Impact of coalition interoperability on PKI

NASA Astrophysics Data System (ADS)

Krall, Edward J.

2003-07-01

This paper examines methods for providing PKI interoperability among units of a coalition of armed forces drawn from different nations. The area in question is tactical identity management, for the purposes of confidentiality, integrity and non-repudiation in such a dynamic coalition. The interoperating applications under consideration range from email and other forms of store-and-forward messaging to TLS and IPSEC-protected real-time communications. Six interoperability architectures are examined with advantages and disadvantages of each described in the paper.

Telemedicine system interoperability architecture: concept description and architecture overview.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

In order for telemedicine to realize the vision of anywhere, anytime access to care, it must address the question of how to create a fully interoperable infrastructure. This paper describes the reasons for pursuing interoperability, outlines operational requirements that any interoperability approach needs to consider, proposes an abstract architecture for meeting these needs, identifies candidate technologies that might be used for rendering this architecture, and suggests a path forward that the telemedicine community might follow.

Semantics Enabled Queries in EuroGEOSS: a Discovery Augmentation Approach

NASA Astrophysics Data System (ADS)

Santoro, M.; Mazzetti, P.; Fugazza, C.; Nativi, S.; Craglia, M.

2010-12-01

One of the main challenges in Earth Science Informatics is to build interoperability frameworks which allow users to discover, evaluate, and use information from different scientific domains. This needs to address multidisciplinary interoperability challenges concerning both technological and scientific aspects. From the technological point of view, it is necessary to provide a set of special interoperability arrangement in order to develop flexible frameworks that allow a variety of loosely-coupled services to interact with each other. From a scientific point of view, it is necessary to document clearly the theoretical and methodological assumptions underpinning applications in different scientific domains, and develop cross-domain ontologies to facilitate interdisciplinary dialogue and understanding. In this presentation we discuss a brokering approach that extends the traditional Service Oriented Architecture (SOA) adopted by most Spatial Data Infrastructures (SDIs) to provide the necessary special interoperability arrangements. In the EC-funded EuroGEOSS (A European approach to GEOSS) project, we distinguish among three possible functional brokering components: discovery, access and semantics brokers. This presentation focuses on the semantics broker, the Discovery Augmentation Component (DAC), which was specifically developed to address the three thematic areas covered by the EuroGEOSS project: biodiversity, forestry and drought. The EuroGEOSS DAC federates both semantics (e.g. SKOS repositories) and ISO-compliant geospatial catalog services. The DAC can be queried using common geospatial constraints (i.e. what, where, when, etc.). Two different augmented discovery styles are supported: a) automatic query expansion; b) user assisted query expansion. In the first case, the main discovery steps are: i. the query keywords (the what constraint) are “expanded” with related concepts/terms retrieved from the set of federated semantic services. A default expansion regards the multilinguality relationship; ii. The resulting queries are submitted to the federated catalog services; iii. The DAC performs a “smart” aggregation of the queries results and provides them back to the client. In the second case, the main discovery steps are: i. the user browses the federated semantic repositories and selects the concepts/terms-of-interest; ii. The DAC creates the set of geospatial queries based on the selected concepts/terms and submits them to the federated catalog services; iii. The DAC performs a “smart” aggregation of the queries results and provides them back to the client. A Graphical User Interface (GUI) was also developed for testing and interacting with the DAC. The entire brokering framework is deployed in the context of EuroGEOSS infrastructure and it is used in a couple of GEOSS AIP-3 use scenarios: the “e-Habitat Use Scenario” for the Biodiversity and Climate Change topic, and the “Comprehensive Drought Index Use Scenario” for Water/Drought topic

Evaluation of a Framework to Implement Electronic Health Record Systems Based on the openEHR Standard

NASA Astrophysics Data System (ADS)

Orellana, Diego A.; Salas, Alberto A.; Solarz, Pablo F.; Medina Ruiz, Luis; Rotger, Viviana I.

2016-04-01

The production of clinical information about each patient is constantly increasing, and it is noteworthy that the information is created in different formats and at diverse points of care, resulting in fragmented, incomplete, inaccurate and isolated, health information. The use of health information technology has been promoted as having a decisive impact to improve the efficiency, cost-effectiveness, quality and safety of medical care delivery. However in developing countries the utilization of health information technology is insufficient and lacking of standards among other situations. In the present work we evaluate the framework EHRGen, based on the openEHR standard, as mean to reach generation and availability of patient centered information. The framework has been evaluated through the provided tools for final users, that is, without intervention of computer experts. It makes easier to adopt the openEHR ideas and provides an open source basis with a set of services, although some limitations in its current state conspire against interoperability and usability. However, despite the described limitations respect to usability and semantic interoperability, EHRGen is, at least regionally, a considerable step toward EHR adoption and interoperability, so that it should be supported from academic and administrative institutions.

Interoperable End-to-End Remote Patient Monitoring Platform Based on IEEE 11073 PHD and ZigBee Health Care Profile.

PubMed

Clarke, Malcolm; de Folter, Joost; Verma, Vivek; Gokalp, Hulya

2018-05-01

This paper describes the implementation of an end-to-end remote monitoring platform based on the IEEE 11073 standards for personal health devices (PHD). It provides an overview of the concepts and approaches and describes how the standard has been optimized for small devices with limited resources of processor, memory, and power that use short-range wireless technology. It explains aspects of IEEE 11073, including the domain information model, state model, and nomenclature, and how these support its plug-and-play architecture. It shows how these aspects underpin a much larger ecosystem of interoperable devices and systems that include IHE PCD-01, HL7, and BlueTooth LE medical devices, and the relationship to the Continua Guidelines, advocating the adoption of data standards and nomenclature to support semantic interoperability between health and ambient assisted living in future platforms. The paper further describes the adaptions that have been made in order to implement the standard on the ZigBee Health Care Profile and the experiences of implementing an end-to-end platform that has been deployed to frail elderly patients with chronic disease(s) and patients with diabetes.

A generic architecture for an adaptive, interoperable and intelligent type 2 diabetes mellitus care system.

PubMed

Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Schulz, Stefan

2015-01-01

Chronic diseases such as Type 2 Diabetes Mellitus (T2DM) constitute a big burden to the global health economy. T2DM Care Management requires a multi-disciplinary and multi-organizational approach. Because of different languages and terminologies, education, experiences, skills, etc., such an approach establishes a special interoperability challenge. The solution is a flexible, scalable, business-controlled, adaptive, knowledge-based, intelligent system following a systems-oriented, architecture-centric, ontology-based and policy-driven approach. The architecture of real systems is described, using the basics and principles of the Generic Component Model (GCM). For representing the functional aspects of a system the Business Process Modeling Notation (BPMN) is used. The system architecture obtained is presented using a GCM graphical notation, class diagrams and BPMN diagrams. The architecture-centric approach considers the compositional nature of the real world system and its functionalities, guarantees coherence, and provides right inferences. The level of generality provided in this paper facilitates use case specific adaptations of the system. By that way, intelligent, adaptive and interoperable T2DM care systems can be derived from the presented model as presented in another publication.

47 CFR 0.192 - Emergency Response Interoperability Center.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Emergency Response Interoperability Center. 0.192 Section 0.192 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Organization Public Safety and Homeland Security Bureau § 0.192 Emergency Response Interoperability Center. (a...

47 CFR 0.192 - Emergency Response Interoperability Center.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Emergency Response Interoperability Center. 0.192 Section 0.192 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Organization Public Safety and Homeland Security Bureau § 0.192 Emergency Response Interoperability Center. (a...

47 CFR 0.192 - Emergency Response Interoperability Center.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Emergency Response Interoperability Center. 0.192 Section 0.192 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Organization Public Safety and Homeland Security Bureau § 0.192 Emergency Response Interoperability Center. (a...

DIMP: an interoperable solution for software integration and product data exchange

NASA Astrophysics Data System (ADS)

Wang, Xi Vincent; Xu, Xun William

2012-08-01

Today, globalisation has become one of the main trends of manufacturing business that has led to a world-wide decentralisation of resources amongst not only individual departments within one company but also business partners. However, despite the development and improvement in the last few decades, difficulties in information exchange and sharing still exist in heterogeneous applications environments. This article is divided into two parts. In the first part, related research work and integrating solutions are reviewed and discussed. The second part introduces a collaborative environment called distributed interoperable manufacturing platform, which is based on a module-based, service-oriented architecture (SOA). In the platform, the STEP-NC data model is used to facilitate data-exchange among heterogeneous CAD/CAM/CNC systems.

Maturity Model for Advancing Smart Grid Interoperability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knight, Mark; Widergren, Steven E.; Mater, J.

2013-10-28

Abstract—Interoperability is about the properties of devices and systems to connect and work properly. Advancing interoperability eases integration and maintenance of the resulting interconnection. This leads to faster integration, lower labor and component costs, predictability of projects and the resulting performance, and evolutionary paths for upgrade. When specifications are shared and standardized, competition and novel solutions can bring new value streams to the community of stakeholders involved. Advancing interoperability involves reaching agreement for how things join at their interfaces. The quality of the agreements and the alignment of parties involved in the agreement present challenges that are best met withmore » process improvement techniques. The GridWise® Architecture Council (GWAC) sponsored by the United States Department of Energy is supporting an effort to use concepts from capability maturity models used in the software industry to advance interoperability of smart grid technology. An interoperability maturity model has been drafted and experience is being gained through trials on various types of projects and community efforts. This paper describes the value and objectives of maturity models, the nature of the interoperability maturity model and how it compares with other maturity models, and experiences gained with its use.« less

Hearing Device Manufacturers Call for Interoperability and Standardization of Internet and Audiology.

PubMed

Laplante-Lévesque, Ariane; Abrams, Harvey; Bülow, Maja; Lunner, Thomas; Nelson, John; Riis, Søren Kamaric; Vanpoucke, Filiep

2016-10-01

This article describes the perspectives of hearing device manufacturers regarding the exciting developments that the Internet makes possible. Specifically, it proposes to join forces toward interoperability and standardization of Internet and audiology. A summary of why such a collaborative effort is required is provided from historical and scientific perspectives. A roadmap toward interoperability and standardization is proposed. Information and communication technologies improve the flow of health care data and pave the way to better health care. However, hearing-related products, features, and services are notoriously heterogeneous and incompatible with other health care systems (no interoperability). Standardization is the process of developing and implementing technical standards (e.g., Noah hearing database). All parties involved in interoperability and standardization realize mutual gains by making mutually consistent decisions. De jure (officially endorsed) standards can be developed in collaboration with large national health care systems as well as spokespeople for hearing care professionals and hearing device users. The roadmap covers mutual collaboration; data privacy, security, and ownership; compliance with current regulations; scalability and modularity; and the scope of interoperability and standards. We propose to join forces to pave the way to the interoperable Internet and audiology products, features, and services that the world needs.

Reflections on the role of open source in health information system interoperability.

PubMed

Sfakianakis, S; Chronaki, C E; Chiarugi, F; Conforti, F; Katehakis, D G

2007-01-01

This paper reflects on the role of open source in health information system interoperability. Open source is a driving force in computer science research and the development of information systems. It facilitates the sharing of information and ideas, enables evolutionary development and open collaborative testing of code, and broadens the adoption of interoperability standards. In health care, information systems have been developed largely ad hoc following proprietary specifications and customized design. However, the wide deployment of integrated services such as Electronic Health Records (EHRs) over regional health information networks (RHINs) relies on interoperability of the underlying information systems and medical devices. This reflection is built on the experiences of the PICNIC project that developed shared software infrastructure components in open source for RHINs and the OpenECG network that offers open source components to lower the implementation cost of interoperability standards such as SCP-ECG, in electrocardiography. Open source components implementing standards and a community providing feedback from real-world use are key enablers of health care information system interoperability. Investing in open source is investing in interoperability and a vital aspect of a long term strategy towards comprehensive health services and clinical research.

Wireless Network Communications Overview for Space Mission Operations

NASA Technical Reports Server (NTRS)

Fink, Patrick W.

2009-01-01

The mission of the On-Board Wireless Working Group (WWG) is to serve as a general CCSDS focus group for intra-vehicle wireless technologies. The WWG investigates and makes recommendations pursuant to standardization of applicable wireless network protocols, ensuring the interoperability of independently developed wireless communication assets. This document presents technical background information concerning uses and applicability of wireless networking technologies for space missions. Agency-relevant driving scenarios, for which wireless network communications will provide a significant return-on-investment benefiting the participating international agencies, are used to focus the scope of the enclosed technical information.

Profiling Fast Healthcare Interoperability Resources (FHIR) of Family Health History based on the Clinical Element Models.

PubMed

Lee, Jaehoon; Hulse, Nathan C; Wood, Grant M; Oniki, Thomas A; Huff, Stanley M

2016-01-01

In this study we developed a Fast Healthcare Interoperability Resources (FHIR) profile to support exchanging a full pedigree based family health history (FHH) information across multiple systems and applications used by clinicians, patients, and researchers. We used previously developed clinical element models (CEMs) that are capable of representing the FHH information, and derived essential data elements including attributes, constraints, and value sets. We analyzed gaps between the FHH CEM elements and existing FHIR resources. Based on the analysis, we developed a profile that consists of 1) FHIR resources for essential FHH data elements, 2) extensions for additional elements that were not covered by the resources, and 3) a structured definition to integrate patient and family member information in a FHIR message. We implemented the profile using an open-source based FHIR framework and validated it using patient-entered FHH data that was captured through a locally developed FHH tool.

A Framework for Integration of Heterogeneous Medical Imaging Networks

PubMed Central

Viana-Ferreira, Carlos; Ribeiro, Luís S; Costa, Carlos

2014-01-01

Medical imaging is increasing its importance in matters of medical diagnosis and in treatment support. Much is due to computers that have revolutionized medical imaging not only in acquisition process but also in the way it is visualized, stored, exchanged and managed. Picture Archiving and Communication Systems (PACS) is an example of how medical imaging takes advantage of computers. To solve problems of interoperability of PACS and medical imaging equipment, the Digital Imaging and Communications in Medicine (DICOM) standard was defined and widely implemented in current solutions. More recently, the need to exchange medical data between distinct institutions resulted in Integrating the Healthcare Enterprise (IHE) initiative that contains a content profile especially conceived for medical imaging exchange: Cross Enterprise Document Sharing for imaging (XDS-i). Moreover, due to application requirements, many solutions developed private networks to support their services. For instance, some applications support enhanced query and retrieve over DICOM objects metadata. This paper proposes anintegration framework to medical imaging networks that provides protocols interoperability and data federation services. It is an extensible plugin system that supports standard approaches (DICOM and XDS-I), but is also capable of supporting private protocols. The framework is being used in the Dicoogle Open Source PACS. PMID:25279021

A framework for integration of heterogeneous medical imaging networks.

PubMed

Viana-Ferreira, Carlos; Ribeiro, Luís S; Costa, Carlos

2014-01-01

Medical imaging is increasing its importance in matters of medical diagnosis and in treatment support. Much is due to computers that have revolutionized medical imaging not only in acquisition process but also in the way it is visualized, stored, exchanged and managed. Picture Archiving and Communication Systems (PACS) is an example of how medical imaging takes advantage of computers. To solve problems of interoperability of PACS and medical imaging equipment, the Digital Imaging and Communications in Medicine (DICOM) standard was defined and widely implemented in current solutions. More recently, the need to exchange medical data between distinct institutions resulted in Integrating the Healthcare Enterprise (IHE) initiative that contains a content profile especially conceived for medical imaging exchange: Cross Enterprise Document Sharing for imaging (XDS-i). Moreover, due to application requirements, many solutions developed private networks to support their services. For instance, some applications support enhanced query and retrieve over DICOM objects metadata. This paper proposes anintegration framework to medical imaging networks that provides protocols interoperability and data federation services. It is an extensible plugin system that supports standard approaches (DICOM and XDS-I), but is also capable of supporting private protocols. The framework is being used in the Dicoogle Open Source PACS.

77 FR 67815 - Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-14

..., Reliability, and Interoperability Council AGENCY: Federal Communications Commission. ACTION: Notice of public... persons that the Federal Communications Commission's (FCC) Communications Security, Reliability, and... the security, reliability, and interoperability of communications systems. On March 19, 2011, the FCC...

Using Clinical Data Standards to Measure Quality: A New Approach.

PubMed

D'Amore, John D; Li, Chun; McCrary, Laura; Niloff, Jonathan M; Sittig, Dean F; McCoy, Allison B; Wright, Adam

2018-04-01

 Value-based payment for care requires the consistent, objective calculation of care quality. Previous initiatives to calculate ambulatory quality measures have relied on billing data or individual electronic health records (EHRs) to calculate and report performance. New methods for quality measure calculation promoted by federal regulations allow qualified clinical data registries to report quality outcomes based on data aggregated across facilities and EHRs using interoperability standards.  This research evaluates the use of clinical document interchange standards as the basis for quality measurement.  Using data on 1,100 patients from 11 ambulatory care facilities and 5 different EHRs, challenges to quality measurement are identified and addressed for 17 certified quality measures.  Iterative solutions were identified for 14 measures that improved patient inclusion and measure calculation accuracy. Findings validate this approach to improving measure accuracy while maintaining measure certification.  Organizations that report care quality should be aware of how identified issues affect quality measure selection and calculation. Quality measure authors should consider increasing real-world validation and the consistency of measure logic in respect to issues identified in this research. Schattauer GmbH Stuttgart.

US Geoscience Information Network, Web Services for Geoscience Information Discovery and Access

NASA Astrophysics Data System (ADS)

Richard, S.; Allison, L.; Clark, R.; Coleman, C.; Chen, G.

2012-04-01

The US Geoscience information network has developed metadata profiles for interoperable catalog services based on ISO19139 and the OGC CSW 2.0.2. Currently data services are being deployed for the US Dept. of Energy-funded National Geothermal Data System. These services utilize OGC Web Map Services, Web Feature Services, and THREDDS-served NetCDF for gridded datasets. Services and underlying datasets (along with a wide variety of other information and non information resources are registered in the catalog system. Metadata for registration is produced by various workflows, including harvest from OGC capabilities documents, Drupal-based web applications, transformation from tabular compilations. Catalog search is implemented using the ESRI Geoportal open-source server. We are pursuing various client applications to demonstrated discovery and utilization of the data services. Currently operational applications allow catalog search and data acquisition from map services in an ESRI ArcMap extension, a catalog browse and search application built on openlayers and Django. We are developing use cases and requirements for other applications to utilize geothermal data services for resource exploration and evaluation.

Content Model Use and Development to Redeem Thin Section Records

NASA Astrophysics Data System (ADS)

Hills, D. J.

2014-12-01

The National Geothermal Data System (NGDS) is a catalog of documents and datasets that provide information about geothermal resources located primarily within the United States. The goal of NGDS is to make large quantities of geothermal-relevant geoscience data available to the public by creating a national, sustainable, distributed, and interoperable network of data providers. The Geological Survey of Alabama (GSA) has been a data provider in the initial phase of NGDS. One method by which NGDS facilitates interoperability is through the use of content models. Content models provide a schema (structure) for submitted data. Schemas dictate where and how data should be entered. Content models use templates that simplify data formatting to expedite use by data providers. These methodologies implemented by NGDS can extend beyond geothermal data to all geoscience data. The GSA, using the NGDS physical samples content model, has tested and refined a content model for thin sections and thin section photos. Countless thin sections have been taken from oil and gas well cores housed at the GSA, and many of those thin sections have related photomicrographs. Record keeping for these thin sections has been scattered at best, and it is critical to capture their metadata while the content creators are still available. A next step will be to register the GSA's thin sections with SESAR (System for Earth Sample Registration) and assign an IGSN (International Geo Sample Number) to each thin section. Additionally, the thin section records will be linked to the GSA's online record database. When complete, the GSA's thin sections will be more readily discoverable and have greater interoperability. Moving forward, the GSA is implementing use of NGDS-like content models and registration with SESAR and IGSN to improve collection maintenance and management of additional physical samples.

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

NASA Astrophysics Data System (ADS)

Glaves, Helen; Schaap, Dick

2016-04-01

The increasingly ocean basin level approach to marine research has led to a corresponding rise in the demand for large quantities of high quality interoperable data. This requirement for easily discoverable and readily available marine data is currently being addressed by initiatives such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Australian Ocean Data Network (AODN) with each having implemented an e-infrastructure to facilitate the discovery and re-use of standardised multidisciplinary marine datasets available from a network of distributed repositories, data centres etc. within their own region. However, these regional data systems have been developed in response to the specific requirements of their users and in line with the priorities of the funding agency. They have also been created independently of the marine data infrastructures in other regions often using different standards, data formats, technologies etc. that make integration of marine data from these regional systems for the purposes of basin level research difficult. Marine research at the ocean basin level requires a common global framework for marine data management which is based on existing regional marine data systems but provides an integrated solution for delivering interoperable marine data to the user. The Ocean Data Interoperability Platform (ODIP/ODIP II) project brings together those responsible for the management of the selected marine data systems and other relevant technical experts with the objective of developing interoperability across the regional e-infrastructures. The commonalities and incompatibilities between the individual data infrastructures are identified and then used as the foundation for the specification of prototype interoperability solutions which demonstrate the feasibility of sharing marine data across the regional systems and also with relevant larger global data services such as GEO, COPERNICUS, IODE, POGO etc. The potential impact for the individual regional data infrastructures of implementing these prototype interoperability solutions is also being evaluated to determine both the technical and financial implications of their integration within existing systems. These impact assessments form part of the strategy to encourage wider adoption of the ODIP solutions and approach beyond the current scope of the project which is focussed on regional marine data systems in Europe, Australia, the USA and, more recently, Canada.

Building the Synergy between Public Sector and Research Data Infrastructures

NASA Astrophysics Data System (ADS)

Craglia, Massimo; Friis-Christensen, Anders; Ostländer, Nicole; Perego, Andrea

2014-05-01

INSPIRE is a European Directive aiming to establish a EU-wide spatial data infrastructure to give cross-border access to information that can be used to support EU environmental policies, as well as other policies and activities having an impact on the environment. In order to ensure cross-border interoperability of data infrastructures operated by EU Member States, INSPIRE sets out a framework based on common specifications for metadata, data, network services, data and service sharing, monitoring and reporting. The implementation of INSPIRE has reached important milestones: the INSPIRE Geoportal was launched in 2011 providing a single access point for the discovery of INSPIRE data and services across EU Member States (currently, about 300K), while all the technical specifications for the interoperability of data across the 34 INSPIRE themes were adopted at the end of 2013. During this period a number of EU and international initiatives has been launched, concerning cross-domain interoperability and (Linked) Open Data. In particular, the EU Open Data Portal, launched in December 2012, made provisions to access government and scientific data from EU institutions and bodies, and the EU ISA Programme (Interoperability Solutions for European Public Administrations) promotes cross-sector interoperability by sharing and re-using EU-wide and national standards and components. Moreover, the Research Data Alliance (RDA), an initiative jointly funded by the European Commission, the US National Science Foundation and the Australian Research Council, was launched in March 2013 to promote scientific data sharing and interoperability. The Joint Research Centre of the European Commission (JRC), besides being the technical coordinator of the implementation of INSPIRE, is also actively involved in the initiatives promoting cross-sector re-use in INSPIRE, and sustainable approaches to address the evolution of technologies - in particular, how to support Linked Data in INSPIRE and the use of global persistent identifiers. It is evident that government and scientific data infrastructures are currently facing a number of issues that have already been addressed in INSPIRE. Sharing experiences and competencies will avoid re-inventing the wheel, and help promoting the cross-domain adoption of consistent solutions. Actually, one of the lessons learnt from INSPIRE and the initiatives in which JRC is involved, is that government and research data are not two separate worlds. Government data are commonly used as a basis to create scientific data, and vice-versa. Consequently, it is fundamental to adopt a consistent approach to address interoperability and data management issues shared by both government and scientific data. The presentation illustrates some of the lessons learnt during the implementation of INSPIRE and in work on data and service interoperability coordinated with European and international initiatives. We describe a number of critical interoperability issues and barriers affecting both scientific and government data, concerning, e.g., data terminologies, quality and licensing, and propose how these problems could be effectively addressed by a closer collaboration of the government and scientific communities, and the sharing of experiences and practices.

UAS Integration in the NAS Project: DAA-TCAS Interoperability "mini" HITL Primary Results

NASA Technical Reports Server (NTRS)

Rorie, Conrad; Fern, Lisa; Shively, Jay; Santiago, Confesor

2016-01-01

At the May 2015 SC-228 meeting, requirements for TCAS II interoperability became elevated in priority. A TCAS interoperability workgroup was formed to identify and address key issues/questions. The TCAS workgroup came up with an initial list of questions and a plan to address those questions. As part of that plan, NASA proposed to run a mini HITL to address display, alerting and guidance issues. A TCAS Interoperability Workshop was held to determine potential display/alerting/guidance issues that could be explored in future NASA mini HITLS. Consensus on main functionality of DAA guidance when TCAS II RA occurs. Prioritized list of independent variables for experimental design. Set of use cases to stress TCAS Interoperability.

An Ontological Solution to Support Interoperability in the Textile Industry

NASA Astrophysics Data System (ADS)

Duque, Arantxa; Campos, Cristina; Jiménez-Ruiz, Ernesto; Chalmeta, Ricardo

Significant developments in information and communication technologies and challenging market conditions have forced enterprises to adapt their way of doing business. In this context, providing mechanisms to guarantee interoperability among heterogeneous organisations has become a critical issue. Even though prolific research has already been conducted in the area of enterprise interoperability, we have found that enterprises still struggle to introduce fully interoperable solutions, especially, in terms of the development and application of ontologies. Thus, the aim of this paper is to introduce basic ontology concepts in a simple manner and to explain the advantages of the use of ontologies to improve interoperability. We will also present a case study showing the implementation of an application ontology for an enterprise in the textile/clothing sector.

Knowledge representation and management enabling intelligent interoperability - principles and standards.

PubMed

Blobel, Bernd

2013-01-01

Based on the paradigm changes for health, health services and underlying technologies as well as the need for at best comprehensive and increasingly automated interoperability, the paper addresses the challenge of knowledge representation and management for medical decision support. After introducing related definitions, a system-theoretical, architecture-centric approach to decision support systems (DSSs) and appropriate ways for representing them using systems of ontologies is given. Finally, existing and emerging knowledge representation and management standards are presented. The paper focuses on the knowledge representation and management part of DSSs, excluding the reasoning part from consideration.

Making Interoperability Easier with NASA's Metadata Management Tool (MMT)

NASA Technical Reports Server (NTRS)

Shum, Dana; Reese, Mark; Pilone, Dan; Baynes, Katie

2016-01-01

While the ISO-19115 collection level metadata format meets many users' needs for interoperable metadata, it can be cumbersome to create it correctly. Through the MMT's simple UI experience, metadata curators can create and edit collections which are compliant with ISO-19115 without full knowledge of the NASA Best Practices implementation of ISO-19115 format. Users are guided through the metadata creation process through a forms-based editor, complete with field information, validation hints and picklists. Once a record is completed, users can download the metadata in any of the supported formats with just 2 clicks.

77 FR 37001 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... of the Interoperability Services Layer, Attn: Ron Chen, 400 Gigling Road, Seaside, CA 93955. Title; Associated Form; and OMB Number: Interoperability Services Layer; OMB Control Number 0704-TBD. Needs and Uses... INFORMATION: Summary of Information Collection IoLS (Interoperability Layer Services) is an application in a...

Achieving Interoperability in GEOSS - How Close Are We?

NASA Astrophysics Data System (ADS)

Arctur, D. K.; Khalsa, S. S.; Browdy, S. F.

2010-12-01

A primary goal of the Global Earth Observing System of System (GEOSS) is improving the interoperability between the observational, modelling, data assimilation, and prediction systems contributed by member countries. The GEOSS Common Infrastructure (GCI) comprises the elements designed to enable discovery and access to these diverse data and information sources. But to what degree can the mechanisms for accessing these data, and the data themselves, be considered interoperable? Will the separate efforts by Communities of Practice within GEO to build their own portals, such as for Energy, Biodiversity, and Air Quality, lead to fragmentation or synergy? What communication and leadership do we need with these communities to improve interoperability both within and across such communities? The Standards and Interoperability Forum (SIF) of GEO's Architecture and Data Committee has assessed progress towards achieving the goal of global interoperability and made recommendations regarding evolution of the architecture and overall data strategy to ensure fulfillment of the GEOSS vision. This presentation will highlight the results of this study, and directions for further work.

Personal Health Records: Is Rapid Adoption Hindering Interoperability?

PubMed Central

Studeny, Jana; Coustasse, Alberto

2014-01-01

The establishment of the Meaningful Use criteria has created a critical need for robust interoperability of health records. A universal definition of a personal health record (PHR) has not been agreed upon. Standardized code sets have been built for specific entities, but integration between them has not been supported. The purpose of this research study was to explore the hindrance and promotion of interoperability standards in relationship to PHRs to describe interoperability progress in this area. The study was conducted following the basic principles of a systematic review, with 61 articles used in the study. Lagging interoperability has stemmed from slow adoption by patients, creation of disparate systems due to rapid development to meet requirements for the Meaningful Use stages, and rapid early development of PHRs prior to the mandate for integration among multiple systems. Findings of this study suggest that deadlines for implementation to capture Meaningful Use incentive payments are supporting the creation of PHR data silos, thereby hindering the goal of high-level interoperability. PMID:25214822

An archiving system for Planetary Mapping Data - Availability of derived information and knowledge in Planetary Science!

NASA Astrophysics Data System (ADS)

Nass, A.

2017-12-01

Since the late 1950s a huge number of planetary missions started to explore our solar system. The data resulting from this robotic exploration and remote sensing varies in data type, resolution and target. After data preprocessing, and referencing, the released data are available for the community on different portals and archiving systems, e.g. PDS or PSA. One major usage for these data is mapping, i.e. the extraction and filtering of information by combining and visualizing different kind of base data. Mapping itself is conducted either for mission planning (e.g. identification of landing site) or fundamental research (e.g. reconstruction of surface). The mapping results for mission planning are directly managed within the mission teams. The derived data for fundamental research - also describable as maps, diagrams, or analysis results - are mainly project-based and exclusively available in scientific papers. Within the last year, first steps have been taken to ensure a sustainable use of these derived data by finding an archiving system comparable to the data portals, i.e. reusable, well-documented, and sustainable. For the implementation three tasks are essential. Two tasks have been treated in the past 1. Comparability and interoperability has been made possible by standardized recommendations for visual, textual, and structural description of mapping data. 2. Interoperability between users, information- and graphic systems is possible by templates and guidelines for digital GIS-based mapping. These two steps are adapted e.g. within recent mapping projects for the Dawn mission. The third task hasn`t been implemented thus far: Establishing an easily detectable and accessible platform that holds already acquired information and published mapping results for future investigations or mapping projects. An archive like this would support the scientific community significantly by a constant rise of knowledge and understanding based on recent discussions within Information Science and Management, and Data Warehousing. This contribution describes the necessary map archive components that have to be considered for an efficient establishment and user-oriented accessibility. It will be described how already existing developments could be used, and which components will have to be developed yet.

Peridigm summary report : lessons learned in development with agile components.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John

2011-09-01

This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of thismore » approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.« less

Evolution of System Architectures: Where Do We Need to Fail Next?

NASA Astrophysics Data System (ADS)

Bermudez, Luis; Alameh, Nadine; Percivall, George

2013-04-01

Innovation requires testing and failing. Thomas Edison was right when he said "I have not failed. I've just found 10,000 ways that won't work". For innovation and improvement of standards to happen, service Architectures have to be tested and tested. Within the Open Geospatial Consortium (OGC), testing of service architectures has occurred for the last 15 years. This talk will present an evolution of these service architectures and a possible future path. OGC is a global forum for the collaboration of developers and users of spatial data products and services, and for the advancement and development of international standards for geospatial interoperability. The OGC Interoperability Program is a series of hands-on, fast paced, engineering initiatives to accelerate the development and acceptance of OGC standards. Each initiative is organized in threads that provide focus under a particular theme. The first testbed, OGC Web Services phase 1, completed in 2003 had four threads: Common Architecture, Web Mapping, Sensor Web and Web Imagery Enablement. The Common Architecture was a cross-thread theme, to ensure that the Web Mapping and Sensor Web experiments built on a base common architecture. The architecture was based on the three main SOA components: Broker, Requestor and Provider. It proposed a general service model defining service interactions and dependencies; categorization of service types; registries to allow discovery and access of services; data models and encodings; and common services (WMS, WFS, WCS). For the latter, there was a clear distinction on the different services: Data Services (e.g. WMS), Application services (e.g. Coordinate transformation) and server-side client applications (e.g. image exploitation). The latest testbed, OGC Web Service phase 9, completed in 2012 had 5 threads: Aviation, Cross-Community Interoperability (CCI), Security and Services Interoperability (SSI), OWS Innovations and Compliance & Interoperability Testing & Evaluation (CITE). Compared to the first testbed, OWS-9 did not have a separate common architecture thread. Instead the emphasis was on brokering information models, securing them and making data available efficiently on mobile devices. The outcome is an architecture based on usability and non-intrusiveness while leveraging mediation of information models from different communities. This talk will use lessons learned from the evolution from OGC Testbed phase 1 to phase 9 to better understand how global and complex infrastructures evolve to support many communities including the Earth System Science Community.

Query Health: standards-based, cross-platform population health surveillance

PubMed Central

Klann, Jeffrey G; Buck, Michael D; Brown, Jeffrey; Hadley, Marc; Elmore, Richard; Weber, Griffin M; Murphy, Shawn N

2014-01-01

Objective Understanding population-level health trends is essential to effectively monitor and improve public health. The Office of the National Coordinator for Health Information Technology (ONC) Query Health initiative is a collaboration to develop a national architecture for distributed, population-level health queries across diverse clinical systems with disparate data models. Here we review Query Health activities, including a standards-based methodology, an open-source reference implementation, and three pilot projects. Materials and methods Query Health defined a standards-based approach for distributed population health queries, using an ontology based on the Quality Data Model and Consolidated Clinical Document Architecture, Health Quality Measures Format (HQMF) as the query language, the Query Envelope as the secure transport layer, and the Quality Reporting Document Architecture as the result language. Results We implemented this approach using Informatics for Integrating Biology and the Bedside (i2b2) and hQuery for data analytics and PopMedNet for access control, secure query distribution, and response. We deployed the reference implementation at three pilot sites: two public health departments (New York City and Massachusetts) and one pilot designed to support Food and Drug Administration post-market safety surveillance activities. The pilots were successful, although improved cross-platform data normalization is needed. Discussions This initiative resulted in a standards-based methodology for population health queries, a reference implementation, and revision of the HQMF standard. It also informed future directions regarding interoperability and data access for ONC's Data Access Framework initiative. Conclusions Query Health was a test of the learning health system that supplied a functional methodology and reference implementation for distributed population health queries that has been validated at three sites. PMID:24699371

Query Health: standards-based, cross-platform population health surveillance.

PubMed

Klann, Jeffrey G; Buck, Michael D; Brown, Jeffrey; Hadley, Marc; Elmore, Richard; Weber, Griffin M; Murphy, Shawn N

2014-01-01

Understanding population-level health trends is essential to effectively monitor and improve public health. The Office of the National Coordinator for Health Information Technology (ONC) Query Health initiative is a collaboration to develop a national architecture for distributed, population-level health queries across diverse clinical systems with disparate data models. Here we review Query Health activities, including a standards-based methodology, an open-source reference implementation, and three pilot projects. Query Health defined a standards-based approach for distributed population health queries, using an ontology based on the Quality Data Model and Consolidated Clinical Document Architecture, Health Quality Measures Format (HQMF) as the query language, the Query Envelope as the secure transport layer, and the Quality Reporting Document Architecture as the result language. We implemented this approach using Informatics for Integrating Biology and the Bedside (i2b2) and hQuery for data analytics and PopMedNet for access control, secure query distribution, and response. We deployed the reference implementation at three pilot sites: two public health departments (New York City and Massachusetts) and one pilot designed to support Food and Drug Administration post-market safety surveillance activities. The pilots were successful, although improved cross-platform data normalization is needed. This initiative resulted in a standards-based methodology for population health queries, a reference implementation, and revision of the HQMF standard. It also informed future directions regarding interoperability and data access for ONC's Data Access Framework initiative. Query Health was a test of the learning health system that supplied a functional methodology and reference implementation for distributed population health queries that has been validated at three sites. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

NASA and Industry Benefits of ACTS High Speed Network Interoperability Experiments

NASA Technical Reports Server (NTRS)

Zernic, M. J.; Beering, D. R.; Brooks, D. E.

2000-01-01

This paper provides synopses of the design. implementation, and results of key high data rate communications experiments utilizing the technologies of NASA's Advanced Communications Technology Satellite (ACTS). Specifically, the network protocol and interoperability performance aspects will be highlighted. The objectives of these key experiments will be discussed in their relevant context to NASA missions, as well as, to the comprehensive communications industry. Discussion of the experiment implementation will highlight the technical aspects of hybrid network connectivity, a variety of high-speed interoperability architectures, a variety of network node platforms, protocol layers, internet-based applications, and new work focused on distinguishing between link errors and congestion. In addition, this paper describes the impact of leveraging government-industry partnerships to achieve technical progress and forge synergistic relationships. These relationships will be the key to success as NASA seeks to combine commercially available technology with its own internal technology developments to realize more robust and cost effective communications for space operations.

PyMOOSE: Interoperable Scripting in Python for MOOSE

PubMed Central

Ray, Subhasis; Bhalla, Upinder S.

2008-01-01

Python is emerging as a common scripting language for simulators. This opens up many possibilities for interoperability in the form of analysis, interfaces, and communications between simulators. We report the integration of Python scripting with the Multi-scale Object Oriented Simulation Environment (MOOSE). MOOSE is a general-purpose simulation system for compartmental neuronal models and for models of signaling pathways based on chemical kinetics. We show how the Python-scripting version of MOOSE, PyMOOSE, combines the power of a compiled simulator with the versatility and ease of use of Python. We illustrate this by using Python numerical libraries to analyze MOOSE output online, and by developing a GUI in Python/Qt for a MOOSE simulation. Finally, we build and run a composite neuronal/signaling model that uses both the NEURON and MOOSE numerical engines, and Python as a bridge between the two. Thus PyMOOSE has a high degree of interoperability with analysis routines, with graphical toolkits, and with other simulators. PMID:19129924

Across the Atlantic cooperation to address international challenges in eHealth and health IT: managing toward a common goal.

PubMed

Friedman, Charles P; Iakovidis, Ilias; Debenedetti, Laurent; Lorenzi, Nancy M

2009-11-01

Countries on both sides of the Atlantic Ocean have invested in health information and communication technologies. Since eHealth challenges cross borders a European Union-United States of America conference on public policies relating to health IT and eHealth was held October 20-21, 2008 in Paris, France. The conference was organized around the four themes: (1) privacy and security, (2) health IT interoperability, (3) deployment and adoption of health IT, and (4) Public Private Collaborative Governance. The four key themes framed the discussion over the two days of plenary sessions and workshops. Key findings of the conference were organized along the four themes. (1) Privacy and security: Patients' access to their own data and key elements of a patient identification management framework were discussed. (2) Health IT interoperability: Three significant and common interoperability challenges emerged: (a) the need to establish common or compatible standards and clear guidelines for their implementation, (b) the desirability for shared certification criteria and (c) the need for greater awareness of the importance of interoperability. (3) Deployment and adoption of health IT: Three major areas of need emerged: (a) a shared knowledge base and assessment framework, (b) public-private collaboration and (c) and effective organizational change strategies. (4) Public Private Collaborative Governance: Sharing and communication are central to success in this area. Nations can learn from one another about ways to develop harmonious, effective partnerships. Three areas that were identified as highest priority for collaboration included: (1) health data security, (2) developing effective strategies to ensure healthcare professionals' acceptance of health IT tools, and (3) interoperability.

A future-proof architecture for telemedicine using loose-coupled modules and HL7 FHIR.

PubMed

Gøeg, Kirstine Rosenbeck; Rasmussen, Rune Kongsgaard; Jensen, Lasse; Wollesen, Christian Møller; Larsen, Søren; Pape-Haugaard, Louise Bilenberg

2018-07-01

Most telemedicine solutions are proprietary and disease specific which cause a heterogeneous and silo-oriented system landscape with limited interoperability. Solving the interoperability problem would require a strong focus on data integration and standardization in telemedicine infrastructures. Our objective was to suggest a future-proof architecture, that consisted of small loose-coupled modules to allow flexible integration with new and existing services, and the use of international standards to allow high re-usability of modules, and interoperability in the health IT landscape. We identified core features of our future-proof architecture as the following (1) To provide extended functionality the system should be designed as a core with modules. Database handling and implementation of security protocols are modules, to improve flexibility compared to other frameworks. (2) To ensure loosely coupled modules the system should implement an inversion of control mechanism. (3) A focus on ease of implementation requires the system should use HL7 FHIR (Fast Interoperable Health Resources) as the primary standard because it is based on web-technologies. We evaluated the feasibility of our architecture by developing an open source implementation of the system called ORDS. ORDS is written in TypeScript, and makes use of the Express Framework and HL7 FHIR DSTU2. The code is distributed on GitHub. All modules have been tested unit wise, but end-to-end testing awaits our first clinical example implementations. Our study showed that highly adaptable and yet interoperable core frameworks for telemedicine can be designed and implemented. Future work includes implementation of a clinical use case and evaluation. Copyright © 2018 Elsevier B.V. All rights reserved.

Cloud-Based Data Sharing Connects Emergency Managers

NASA Technical Reports Server (NTRS)

2014-01-01

Under an SBIR contract with Stennis Space Center, Baltimore-based StormCenter Communications Inc. developed an improved interoperable platform for sharing geospatial data over the Internet in real time-information that is critical for decision makers in emergency situations.

Organisational Interoperability: Evaluation and Further Development of the OIM Model

DTIC Science & Technology

2003-06-01

an Organizational Interoperability Maturity Model (OIM) to evaluate interoperability at the organizational level. The OIM considers the human ... activity aspects of military operations, which are not covered in other models. This paper describes how the model has been used to identify problems and to

TR32DB - Management of Research Data in a Collaborative, Interdisciplinary Research Project

NASA Astrophysics Data System (ADS)

Curdt, Constanze; Hoffmeister, Dirk; Waldhoff, Guido; Lang, Ulrich; Bareth, Georg

2015-04-01

The management of research data in a well-structured and documented manner is essential in the context of collaborative, interdisciplinary research environments (e.g. across various institutions). Consequently, set-up and use of a research data management (RDM) system like a data repository or project database is necessary. These systems should accompany and support scientists during the entire research life cycle (e.g. data collection, documentation, storage, archiving, sharing, publishing) and operate cross-disciplinary in interdisciplinary research projects. Challenges and problems of RDM are well-know. Consequently, the set-up of a user-friendly, well-documented, sustainable RDM system is essential, as well as user support and further assistance. In the framework of the Transregio Collaborative Research Centre 32 'Patterns in Soil-Vegetation-Atmosphere Systems: Monitoring, Modelling, and Data Assimilation' (CRC/TR32), funded by the German Research Foundation (DFG), a RDM system was self-designed and implemented. The CRC/TR32 project database (TR32DB, www.tr32db.de) is operating online since early 2008. The TR32DB handles all data, which are created by the involved project participants from several institutions (e.g. Universities of Cologne, Bonn, Aachen, and the Research Centre Jülich) and research fields (e.g. soil and plant sciences, hydrology, geography, geophysics, meteorology, remote sensing). Very heterogeneous research data are considered, which are resulting from field measurement campaigns, meteorological monitoring, remote sensing, laboratory studies and modelling approaches. Furthermore, outcomes like publications, conference contributions, PhD reports and corresponding images are regarded. The TR32DB project database is set-up in cooperation with the Regional Computing Centre of the University of Cologne (RRZK) and also located in this hardware environment. The TR32DB system architecture is composed of three main components: (i) a file-based data storage including backup, (ii) a database-based storage for administrative data and metadata, and (iii) a web-interface for user access. The TR32DB offers common features of RDM systems. These include data storage, entry of corresponding metadata by a user-friendly input wizard, search and download of data depending on user permission, as well as secure internal exchange of data. In addition, a Digital Object Identifier (DOI) can be allocated for specific datasets and several web mapping components are supported (e.g. Web-GIS and map search). The centrepiece of the TR32DB is the self-provided and implemented CRC/TR32 specific metadata schema. This enables the documentation of all involved, heterogeneous data with accurate, interoperable metadata. The TR32DB Metadata Schema is set-up in a multi-level approach and supports several metadata standards and schemes (e.g. Dublin Core, ISO 19115, INSPIRE, DataCite). Furthermore, metadata properties with focus on the CRC/TR32 background (e.g. CRC/TR32 specific keywords) and the supported data types are complemented. Mandatory, optional and automatic metadata properties are specified. Overall, the TR32DB is designed and implemented according to the needs of the CRC/TR32 (e.g. huge amount of heterogeneous data) and demands of the DFG (e.g. cooperation with a computing centre). The application of a self-designed, project-specific, interoperable metadata schema enables the accurate documentation of all CRC/TR32 data. The implementation of the TR32DB in the hardware environment of the RRZK ensures the access to the data after the end of the CRC/TR32 funding in 2018.

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

77 FR 48153 - Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

..., Reliability, and Interoperability Council AGENCY: Federal Communications Commission. ACTION: Notice of public..., Reliability, and Interoperability Council (CSRIC) will hold its fifth meeting. The CSRIC will vote on... to the FCC regarding best practices and actions the FCC can take to ensure the security, reliability...

Evaluation of Interoperability Protocols in Repositories of Electronic Theses and Dissertations

ERIC Educational Resources Information Center

Hakimjavadi, Hesamedin; Masrek, Mohamad Noorman

2013-01-01

Purpose: The purpose of this study is to evaluate the status of eight interoperability protocols within repositories of electronic theses and dissertations (ETDs) as an introduction to further studies on feasibility of deploying these protocols in upcoming areas of interoperability. Design/methodology/approach: Three surveys of 266 ETD…

Examining the Relationship between Electronic Health Record Interoperability and Quality Management

ERIC Educational Resources Information Center

Purcell, Bernice M.

2013-01-01

A lack of interoperability impairs data quality among health care providers' electronic health record (EHR) systems. The problem is whether the International Organization for Standardization (ISO) 9000 principles relate to the problem of interoperability in implementation of EHR systems. The purpose of the nonexperimental quantitative research…

Interoperability of Demand Response Resources Demonstration in NY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wellington, Andre

2014-03-31

The Interoperability of Demand Response Resources Demonstration in NY (Interoperability Project) was awarded to Con Edison in 2009. The objective of the project was to develop and demonstrate methodologies to enhance the ability of customer sited Demand Response resources to integrate more effectively with electric delivery companies and regional transmission organizations.

Watershed and Economic Data InterOperability (WEDO): Facilitating Discovery, Evaluation and Integration through the Sharing of Watershed Modeling Data

EPA Science Inventory

Watershed and Economic Data InterOperability (WEDO) is a system of information technologies designed to publish watershed modeling studies for reuse. WEDO facilitates three aspects of interoperability: discovery, evaluation and integration of data. This increased level of interop...

The HDF Product Designer - Interoperability in the First Mile

NASA Astrophysics Data System (ADS)

Lee, H.; Jelenak, A.; Habermann, T.

2014-12-01

Interoperable data have been a long-time goal in many scientific communities. The recent growth in analysis, visualization and mash-up applications that expect data stored in a standardized manner has brought the interoperability issue to the fore. On the other hand, producing interoperable data is often regarded as a sideline task in a typical research team for which resources are not readily available. The HDF Group is developing a software tool aimed at lessening the burden of creating data in standards-compliant, interoperable HDF5 files. The tool, named HDF Product Designer, lowers the threshold needed to design such files by providing a user interface that combines the rich HDF5 feature set with applicable metadata conventions. Users can quickly devise new HDF5 files while at the same time seamlessly incorporating the latest best practices and conventions from their community. That is what the term interoperability in the first mile means: enabling generation of interoperable data in HDF5 files from the onset of their production. The tool also incorporates collaborative features, allowing team approach in the file design, as well as easy transfer of best practices as they are being developed. The current state of the tool and the plans for future development will be presented. Constructive input from interested parties is always welcome.

Potential interoperability problems facing multi-site radiation oncology centers in The Netherlands

NASA Astrophysics Data System (ADS)

Scheurleer, J.; Koken, Ph; Wessel, R.

2014-03-01

Aim: To identify potential interoperability problems facing multi-site Radiation Oncology (RO) departments in the Netherlands and solutions for unambiguous multi-system workflows. Specific challenges confronting the RO department of VUmc (RO-VUmc), which is soon to open a satellite department, were characterized. Methods: A nationwide questionnaire survey was conducted to identify possible interoperability problems and solutions. Further detailed information was obtained by in-depth interviews at 3 Dutch RO institutes that already operate in more than one site. Results: The survey had a 100% response rate (n=21). Altogether 95 interoperability problems were described. Most reported problems were on a strategic and semantic level. The majority were DICOM(-RT) and HL7 related (n=65), primarily between treatment planning and verification systems or between departmental and hospital systems. Seven were identified as being relevant for RO-VUmc. Departments have overcome interoperability problems with their own, or with tailor-made vendor solutions. There was little knowledge about or utilization of solutions developed by Integrating the Healthcare Enterprise Radiation Oncology (IHE-RO). Conclusions: Although interoperability problems are still common, solutions have been identified. Awareness of IHE-RO needs to be raised. No major new interoperability problems are predicted as RO-VUmc develops into a multi-site department.

NASA's Earth Science Gateway: A Platform for Interoperable Services in Support of the GEOSS Architecture

NASA Astrophysics Data System (ADS)

Alameh, N.; Bambacus, M.; Cole, M.

2006-12-01

Nasa's Earth Science as well as interdisciplinary research and applications activities require access to earth observations, analytical models and specialized tools and services, from diverse distributed sources. Interoperability and open standards for geospatial data access and processing greatly facilitate such access among the information and processing compo¬nents related to space¬craft, airborne, and in situ sensors; predictive models; and decision support tools. To support this mission, NASA's Geosciences Interoperability Office (GIO) has been developing the Earth Science Gateway (ESG; online at http://esg.gsfc.nasa.gov) by adapting and deploying a standards-based commercial product. Thanks to extensive use of open standards, ESG can tap into a wide array of online data services, serve a variety of audiences and purposes, and adapt to technology and business changes. Most importantly, the use of open standards allow ESG to function as a platform within a larger context of distributed geoscience processing, such as the Global Earth Observing System of Systems (GEOSS). ESG shares the goals of GEOSS to ensure that observations and products shared by users will be accessible, comparable, and understandable by relying on common standards and adaptation to user needs. By maximizing interoperability, modularity, extensibility and scalability, ESG's architecture fully supports the stated goals of GEOSS. As such, ESG's role extends beyond that of a gateway to NASA science data to become a shared platform that can be leveraged by GEOSS via: A modular and extensible architecture Consensus and community-based standards (e.g. ISO and OGC standards) A variety of clients and visualization techniques, including WorldWind and Google Earth A variety of services (including catalogs) with standard interfaces Data integration and interoperability Mechanisms for user involvement and collaboration Mechanisms for supporting interdisciplinary and domain-specific applications ESG has played a key role in recent GEOSS Service Network (GSN) demos and workshops, acting not only as a service and data catalog and discovery client, but also as a portrayal and visualization client to distributed data.

Electronic Health Record Challenges, Workarounds, and Solutions Observed in Practices Integrating Behavioral Health and Primary Care.

PubMed

Cifuentes, Maribel; Davis, Melinda; Fernald, Doug; Gunn, Rose; Dickinson, Perry; Cohen, Deborah J

2015-01-01

This article describes the electronic health record (EHR)-related experiences of practices striving to integrate behavioral health and primary care using tailored, evidenced-based strategies from 2012 to 2014; and the challenges, workarounds and initial health information technology (HIT) solutions that emerged during implementation. This was an observational, cross-case comparative study of 11 diverse practices, including 8 primary care clinics and 3 community mental health centers focused on the implementation of integrated care. Practice characteristics (eg, practice ownership, federal designation, geographic area, provider composition, EHR system, and patient panel characteristics) were collected using a practice information survey and analyzed to report descriptive information. A multidisciplinary team used a grounded theory approach to analyze program documents, field notes from practice observation visits, online diaries, and semistructured interviews. Eight primary care practices used a single EHR and 3 practices used 2 different EHRs, 1 to document behavioral health and 1 to document primary care information. Practices experienced common challenges with their EHRs' capabilities to 1) document and track relevant behavioral health and physical health information, 2) support communication and coordination of care among integrated teams, and 3) exchange information with tablet devices and other EHRs. Practices developed workarounds in response to these challenges: double documentation and duplicate data entry, scanning and transporting documents, reliance on patient or clinician recall for inaccessible EHR information, and use of freestanding tracking systems. As practices gained experience with integration, they began to move beyond workarounds to more permanent HIT solutions ranging in complexity from customized EHR templates, EHR upgrades, and unified EHRs. Integrating behavioral health and primary care further burdens EHRs. Vendors, in cooperation with clinicians, should intentionally design EHR products that support integrated care delivery functions, such as data documentation and reporting to support tracking patients with emotional and behavioral problems over time and settings, integrated teams working from shared care plans, template-driven documentation for common behavioral health conditions such as depression, and improved registry functionality and interoperability. This work will require financial support and cooperative efforts among clinicians, EHR vendors, practice assistance organizations, regulators, standards setters, and workforce educators. © Copyright 2015 by the American Board of Family Medicine.

Procrustes-based geometric morphometrics on MRI images: An example of inter-operator bias in 3D landmarks and its impact on big datasets.

PubMed

Daboul, Amro; Ivanovska, Tatyana; Bülow, Robin; Biffar, Reiner; Cardini, Andrea

2018-01-01

Using 3D anatomical landmarks from adult human head MRIs, we assessed the magnitude of inter-operator differences in Procrustes-based geometric morphometric analyses. An in depth analysis of both absolute and relative error was performed in a subsample of individuals with replicated digitization by three different operators. The effect of inter-operator differences was also explored in a large sample of more than 900 individuals. Although absolute error was not unusual for MRI measurements, including bone landmarks, shape was particularly affected by differences among operators, with up to more than 30% of sample variation accounted for by this type of error. The magnitude of the bias was such that it dominated the main pattern of bone and total (all landmarks included) shape variation, largely surpassing the effect of sex differences between hundreds of men and women. In contrast, however, we found higher reproducibility in soft-tissue nasal landmarks, despite relatively larger errors in estimates of nasal size. Our study exemplifies the assessment of measurement error using geometric morphometrics on landmarks from MRIs and stresses the importance of relating it to total sample variance within the specific methodological framework being used. In summary, precise landmarks may not necessarily imply negligible errors, especially in shape data; indeed, size and shape may be differentially impacted by measurement error and different types of landmarks may have relatively larger or smaller errors. Importantly, and consistently with other recent studies using geometric morphometrics on digital images (which, however, were not specific to MRI data), this study showed that inter-operator biases can be a major source of error in the analysis of large samples, as those that are becoming increasingly common in the 'era of big data'.

Procrustes-based geometric morphometrics on MRI images: An example of inter-operator bias in 3D landmarks and its impact on big datasets

PubMed Central

Ivanovska, Tatyana; Bülow, Robin; Biffar, Reiner; Cardini, Andrea

2018-01-01

Using 3D anatomical landmarks from adult human head MRIs, we assessed the magnitude of inter-operator differences in Procrustes-based geometric morphometric analyses. An in depth analysis of both absolute and relative error was performed in a subsample of individuals with replicated digitization by three different operators. The effect of inter-operator differences was also explored in a large sample of more than 900 individuals. Although absolute error was not unusual for MRI measurements, including bone landmarks, shape was particularly affected by differences among operators, with up to more than 30% of sample variation accounted for by this type of error. The magnitude of the bias was such that it dominated the main pattern of bone and total (all landmarks included) shape variation, largely surpassing the effect of sex differences between hundreds of men and women. In contrast, however, we found higher reproducibility in soft-tissue nasal landmarks, despite relatively larger errors in estimates of nasal size. Our study exemplifies the assessment of measurement error using geometric morphometrics on landmarks from MRIs and stresses the importance of relating it to total sample variance within the specific methodological framework being used. In summary, precise landmarks may not necessarily imply negligible errors, especially in shape data; indeed, size and shape may be differentially impacted by measurement error and different types of landmarks may have relatively larger or smaller errors. Importantly, and consistently with other recent studies using geometric morphometrics on digital images (which, however, were not specific to MRI data), this study showed that inter-operator biases can be a major source of error in the analysis of large samples, as those that are becoming increasingly common in the 'era of big data'. PMID:29787586

Data interoperability software solution for emergency reaction in the Europe Union

NASA Astrophysics Data System (ADS)

Casado, R.; Rubiera, E.; Sacristan, M.; Schütte, F.; Peters, R.

2015-07-01

Emergency management becomes more challenging in international crisis episodes because of cultural, semantic and linguistic differences between all stakeholders, especially first responders. Misunderstandings between first responders makes decision making slower and more difficult. However, spread and development of networks and IT-based emergency management systems (EMSs) have improved emergency responses, which have become more coordinated. Despite improvements made in recent years, EMSs have not still solved problems related to cultural, semantic and linguistic differences which are the real cause of slower decision making. In addition, from a technical perspective, the consolidation of current EMSs and the different formats used to exchange information offers another problem to be solved in any solution proposed for information interoperability between heterogeneous EMSs in different contexts. To overcome these problems, we present a software solution based on semantic and mediation technologies. EMERGency ELements (EMERGEL) (Fundacion CTIC and AntwortING Ingenieurbüro PartG, 2013), a common and modular ontology shared by all the stakeholders, has been defined. It offers the best solution to gather all stakeholders' knowledge in a unique and flexible data model, taking into account different countries' cultural and linguistic issues. To deal with the diversity of data protocols and formats, we have designed a service-oriented architecture for data interoperability (named DISASTER: Data Interoperability Solution At STakeholders Emergency Reaction) providing a flexible extensible solution to solve the mediation issues. Web services have been adopted as specific technology to implement this paradigm that has the most significant academic and industrial visibility and attraction. Contributions of this work have been validated through the design and development of a cross-border realistic prototype scenario, actively involving both emergency managers and emergency-first responders: the Netherlands-Germany border fire.

Topic maps for exploring nosological, lexical, semantic and HL7 structures for clinical data.

PubMed

Paterson, Grace I; Grant, Andrew M; Soroka, Steven D

2008-12-01

A topic map is implemented for learning about clinical data associated with a hospital stay for patients diagnosed with chronic kidney disease, diabetes and hypertension. The question posed is: how might a topic map help bridge perspectival differences among communities of practice and help make commensurable the different classifications they use? The knowledge layer of the topic map was generated from existing ontological relationships in nosological, lexical, semantic and HL7 boundary objects. Discharge summaries, patient charts and clinical data warehouse entries rectified the clinical knowledge used in practice. These clinical data were normalized to HL7 Clinical Document Architecture (CDA) markup standard and stored in the Clinical Document Repository. Each CDA entry was given a subject identifier and linked with the topic map. The ability of topic maps to function as the infostructure ;glue' is assessed using dimensions of semantic interoperability and commensurability.

Development of Extended Content Standards for Biodiversity Data

NASA Astrophysics Data System (ADS)

Hugo, Wim; Schmidt, Jochen; Saarenmaa, Hannu

2013-04-01

Interoperability in the field of Biodiversity observation has been strongly driven by the development of a number of global initiatives (GEO, GBIF, OGC, TDWG, GenBank, …) and its supporting standards (OGC-WxS, OGC-SOS, Darwin Core (DwC), NetCDF, …). To a large extent, these initiatives have focused on discoverability and standardization of syntactic and schematic interoperability. Semantic interoperability is more complex, requiring development of domain-dependent conceptual data models, and extension of these models with appropriate ontologies (typically manifested as controlled vocabularies). Biodiversity content has been standardized partly, for example through Darwin Core for occurrence data and associated taxonomy, and through Genbank for genetic data, but other contexts of biodiversity observation have lagged behind - making it difficult to achieve semantic interoperability between distributed data sources. With this in mind, WG8 of GEO BON (charged with data and systems interoperability) has started a work programme to address a number of concerns, one of which is the gap in content standards required to make Biodiversity data truly interoperable. The paper reports on the framework developed by WG8 for the classification of Biodiversity observation data into 'families' of use cases and its supporting data schema, where gaps, if any, in the availability if content standards have been identified, and how these are to be addressed by way of an abstract data model and the development of associated content standards. It is proposed that a minimum set of standards (1) will be required to address the scope of Biodiversity content, aligned with levels and dimensions of observation, and based on the 'Essential Biodiversity Variables' (2) being developed by GEO BON . The content standards are envisaged as loosely separated from the syntactic and schematic standards used for the base data exchange: typically, services would offer an existing data standard (DwC, WFS, SOS, NetCDF), with a use-case dependent 'payload' embedded into the data stream. This enables the re-use of the abstract schema, and sometimes the implementation specification (for example XML, JSON, or NetCDF conventions) across services. An explicit aim will be to make the XML implementation specification re-usable as a DwC and a GML (SOS end WFS) extension. (1) Olga Lyashevska, Keith D. Farnsworth, How many dimensions of biodiversity do we need?, Ecological Indicators, Volume 18, July 2012, Pages 485-492, ISSN 1470-160X, 10.1016/j.ecolind.2011.12.016. (2) GEO BON: Workshop on Essential Biodiversity Variables (27-29 February 2012, Frascati, Italy). (http://www.earthobservations.org/geobon_docs_20120227.shtml)

A qualitative study of Canada's experience with the implementation of electronic health information technology.

PubMed

Rozenblum, Ronen; Jang, Yeona; Zimlichman, Eyal; Salzberg, Claudia; Tamblyn, Melissa; Buckeridge, David; Forster, Alan; Bates, David W; Tamblyn, Robyn

2011-03-22

In 2001, Canada Health Infoway unveiled a plan to implement a national system of interoperable electronic health records. This government-funded corporation introduced a novel model for interprovincial/territorial collaboration to establish core aspects of a national framework. Despite this $1.6 billion initiative, Canada continues to lag behind other Western countries in adopting electronic health records. We conducted a study to identify the success of different aspects of the Canadian plan and ways to improve the adoption of electronic health records. We used a case study approach to assess the 10-year history of Canada's e-health plan. National reports and documents were reviewed, and structured interviews were conducted with 29 key stakeholders representing national and provincial organizations responsible for establishing policy and strategic direction for health information technology. Using grounded theory, we analyzed transcripts of the interviews to identify themes and their relationships. Key stakeholders identified funding, national standards, patient registries and digital imaging as important achievements of the e-health plan. Lack of an e-health policy, inadequate involvement of clinicians, failure to establish a business case for using electronic health records, a focus on national rather than regional interoperability, and inflexibility in approach were seen as barriers to adoption of the plan. To accelerate adoption of electronic health records and timely return on investment, an e-health policy needs to be tightly aligned with the major strategic directions of health care reform. Adoption needs to be actively fostered through a bottom-up, clinical-needs-first approach, a national policy for investment in electronic health records, and financial incentives based on patient outcomes that can be achieved with electronic health records.

A qualitative study of Canada’s experience with the implementation of electronic health information technology

PubMed Central

Rozenblum, Ronen; Jang, Yeona; Zimlichman, Eyal; Salzberg, Claudia; Tamblyn, Melissa; Buckeridge, David; Forster, Alan; Bates, David W.; Tamblyn, Robyn

2011-01-01

Background In 2001, Canada Health Infoway unveiled a plan to implement a national system of interoperable electronic health records. This government-funded corporation introduced a novel model for interprovincial/territorial collaboration to establish core aspects of a national framework. Despite this $1.6 billion initiative, Canada continues to lag behind other Western countries in adopting electronic health records. We conducted a study to identify the success of different aspects of the Canadian plan and ways to improve the adoption of electronic health records. Methods We used a case study approach to assess the 10-year history of Canada’s e-health plan. National reports and documents were reviewed, and structured interviews were conducted with 29 key stakeholders representing national and provincial organizations responsible for establishing policy and strategic direction for health information technology. Using grounded theory, we analyzed transcripts of the interviews to identify themes and their relationships. Results Key stakeholders identified funding, national standards, patient registries and digital imaging as important achievements of the e-health plan. Lack of an e-health policy, inadequate involvement of clinicians, failure to establish a business case for using electronic health records, a focus on national rather than regional interoperability, and inflexibility in approach were seen as barriers to adoption of the plan. Interpretation To accelerate adoption of electronic health records and timely return on investment, an e-health policy needs to be tightly aligned with the major strategic directions of health care reform. Adoption needs to be actively fostered through a bottom-up, clinical-needs-first approach, a national policy for investment in electronic health records, and financial incentives based on patient outcomes that can be achieved with electronic health records. PMID:21343262

A case study of the introduction of the International Classification for Nursing Practice(®) in Poland.

PubMed

Kilańska, D; Gaworska-Krzemińska, A; Grabowska, H; Gorzkowicz, B

2016-09-01

The development of a nursing practice, improvements in nurses' autonomy, and increased professional and personal responsibility for the medical services provided all require professional documentation with records of health status assessments, decisions undertaken, actions and their outcomes for each patient. The International Classification for Nursing Practice is a tool that meets all of these needs, and although it requires continuous evaluation, it offers professional documentation and communication in the practitioner and researcher community. The aim of this paper is to present a theoretical critique of an issue related to policy and experience of the current situation in Polish nursing - especially of the efforts to standardize nursing practices through the introduction and development of the Classification in Poland. Despite extensive promotion and training by International Council of Nurses members worldwide, there are still many countries where the Classification has not been implemented as a standard tool in healthcare facilities. Recently, a number of initiatives were undertaken in cooperation with the local and state authorities to disseminate the Classification in healthcare facilities. Thanks to intense efforts by the Polish Nurses Association and the International Council of Nurses Accredited Center for ICNP(®) Research & Development at the Medical University of Łódź, the Classification is known in Poland and has been tested at several centres. Nevertheless, an actual implementation that would allow for national and international interoperability requires strategic governmental decisions and close cooperation with information technology companies operating in the country. Discussing the barriers to the implementation of the Classification can improve understanding of it and its use. At a policy level, decision makers need to understand that use Classification in eHealth services and tools it is necessary to achieve interoperability. © 2016 International Council of Nurses.

Elements of Network-Based Assessment

ERIC Educational Resources Information Center

Gibson, David

2007-01-01

Elements of network-based assessment systems are envisioned based on recent advances in knowledge and practice in learning theory, assessment design and delivery, and semantic web interoperability. The architecture takes advantage of the meditating role of technology as well as recent models of assessment systems. This overview of the elements…

Supporting spatial data harmonization process with the use of ontologies and Semantic Web technologies

NASA Astrophysics Data System (ADS)

Strzelecki, M.; Iwaniak, A.; Łukowicz, J.; Kaczmarek, I.

2013-10-01

Nowadays, spatial information is not only used by professionals, but also by common citizens, who uses it for their daily activities. Open Data initiative states that data should be freely and unreservedly available for all users. It also applies to spatial data. As spatial data becomes widely available it is essential to publish it in form which guarantees the possibility of integrating it with other, heterogeneous data sources. Interoperability is the possibility to combine spatial data sets from different sources in a consistent way as well as providing access to it. Providing syntactic interoperability based on well-known data formats is relatively simple, unlike providing semantic interoperability, due to the multiple possible data interpretation. One of the issues connected with the problem of achieving interoperability is data harmonization. It is a process of providing access to spatial data in a representation that allows combining it with other harmonized data in a coherent way by using a common set of data product specification. Spatial data harmonization is performed by creating definition of reclassification and transformation rules (mapping schema) for source application schema. Creation of those rules is a very demanding task which requires wide domain knowledge and a detailed look into application schemas. The paper focuses on proposing methods for supporting data harmonization process, by automated or supervised creation of mapping schemas with the use of ontologies, ontology matching methods and Semantic Web technologies.

Architectural approaches for HL7-based health information systems implementation.

PubMed

López, D M; Blobel, B

2010-01-01

Information systems integration is hard, especially when semantic and business process interoperability requirements need to be met. To succeed, a unified methodology, approaching different aspects of systems architecture such as business, information, computational, engineering and technology viewpoints, has to be considered. The paper contributes with an analysis and demonstration on how the HL7 standard set can support health information systems integration. Based on the Health Information Systems Development Framework (HIS-DF), common architectural models for HIS integration are analyzed. The framework is a standard-based, consistent, comprehensive, customizable, scalable methodology that supports the design of semantically interoperable health information systems and components. Three main architectural models for system integration are analyzed: the point to point interface, the messages server and the mediator models. Point to point interface and messages server models are completely supported by traditional HL7 version 2 and version 3 messaging. The HL7 v3 standard specification, combined with service-oriented, model-driven approaches provided by HIS-DF, makes the mediator model possible. The different integration scenarios are illustrated by describing a proof-of-concept implementation of an integrated public health surveillance system based on Enterprise Java Beans technology. Selecting the appropriate integration architecture is a fundamental issue of any software development project. HIS-DF provides a unique methodological approach guiding the development of healthcare integration projects. The mediator model - offered by the HIS-DF and supported in HL7 v3 artifacts - is the more promising one promoting the development of open, reusable, flexible, semantically interoperable, platform-independent, service-oriented and standard-based health information systems.

[Research on tumor information grid framework].

PubMed

Zhang, Haowei; Qin, Zhu; Liu, Ying; Tan, Jianghao; Cao, Haitao; Chen, Youping; Zhang, Ke; Ding, Yuqing

2013-10-01

In order to realize tumor disease information sharing and unified management, we utilized grid technology to make the data and software resources which distributed in various medical institutions for effective integration so that we could make the heterogeneous resources consistent and interoperable in both semantics and syntax aspects. This article describes the tumor grid framework, the type of the service being packaged in Web Service Description Language (WSDL) and extensible markup language schemas definition (XSD), the client use the serialized document to operate the distributed resources. The service objects could be built by Unified Modeling Language (UML) as middle ware to create application programming interface. All of the grid resources are registered in the index and released in the form of Web Services based on Web Services Resource Framework (WSRF). Using the system we can build a multi-center, large sample and networking tumor disease resource sharing framework to improve the level of development in medical scientific research institutions and the patient's quality of life.

Mobile platform for treatment of stroke: A case study of tele-assistance

PubMed Central

Torres Zenteno, Arturo Henry; Fernández, Francisco; Palomino-García, Alfredo; Moniche, Francisco; Escudero, Irene; Jiménez-Hernández, M Dolores; Caballero, Auxiliadora; Escobar-Rodriguez, Germán; Parra, Carlos

2015-01-01

This article presents the technological solution of a tele-assistance process for stroke patients in acute phase in the Seville metropolitan area. The main objective of this process is to reduce time from symptom onset to treatment of acute phase stroke patients by means of telemedicine, regarding mobility between an intensive care unit ambulance and an expert center and activating the pre-hospital care phase. The technological platform covering the process has been defined following an interoperability model based on standards and with a focus on service-oriented architecture focus. Messaging definition has been designed according to the reference model of the CEN/ISO 13606, messages content follows the structure of archetypes. An XDS-b (Cross-Enterprise Document Sharing-b) transaction messaging has been designed according to Integrating the Healthcare Enterprise profile for archetype notifications and update enquiries.This research has been performed by a multidisciplinary group. The Virgen del Rocío University Hospital acts as Reference Hospital and the Public Company for Healthcare as mobility surroundings. PMID:25975806

ImTK: an open source multi-center information management toolkit

NASA Astrophysics Data System (ADS)

Alaoui, Adil; Ingeholm, Mary Lou; Padh, Shilpa; Dorobantu, Mihai; Desai, Mihir; Cleary, Kevin; Mun, Seong K.

2008-03-01

The Information Management Toolkit (ImTK) Consortium is an open source initiative to develop robust, freely available tools related to the information management needs of basic, clinical, and translational research. An open source framework and agile programming methodology can enable distributed software development while an open architecture will encourage interoperability across different environments. The ISIS Center has conceptualized a prototype data sharing network that simulates a multi-center environment based on a federated data access model. This model includes the development of software tools to enable efficient exchange, sharing, management, and analysis of multimedia medical information such as clinical information, images, and bioinformatics data from multiple data sources. The envisioned ImTK data environment will include an open architecture and data model implementation that complies with existing standards such as Digital Imaging and Communications (DICOM), Health Level 7 (HL7), and the technical framework and workflow defined by the Integrating the Healthcare Enterprise (IHE) Information Technology Infrastructure initiative, mainly the Cross Enterprise Document Sharing (XDS) specifications.

Sustainability of Open-Source Software Organizations as Underpinning for Sustainable Interoperability on Large Scales

NASA Astrophysics Data System (ADS)

Fulker, D. W.; Gallagher, J. H. R.

2015-12-01

OPeNDAP's Hyrax data server is an open-source framework fostering interoperability via easily-deployed Web services. Compatible with solutions listed in the (PA001) session description—federation, rigid standards and brokering/mediation—the framework can support tight or loose coupling, even with dependence on community-contributed software. Hyrax is a Web-services framework with a middleware-like design and a handler-style architecture that together reduce the interoperability challenge (for N datatypes and M user contexts) to an O(N+M) problem, similar to brokering. Combined with an open-source ethos, this reduction makes Hyrax a community tool for gaining interoperability. E.g., in its response to the Big Earth Data Initiative (BEDI), NASA references OPeNDAP-based interoperability. Assuming its suitability, the question becomes: how sustainable is OPeNDAP, a small not-for-profit that produces open-source software, i.e., has no software-sales? In other words, if geoscience interoperability depends on OPeNDAP and similar organizations, are those entities in turn sustainable? Jim Collins (in Good to Great) highlights three questions that successful companies can answer (paraphrased here): What is your passion? Where is your world-class excellence? What drives your economic engine? We attempt to shed light on OPeNDAP sustainability by examining these. Passion: OPeNDAP has a focused passion for improving the effectiveness of scientific data sharing and use, as deeply-cooperative community endeavors. Excellence: OPeNDAP has few peers in remote, scientific data access. Skills include computer science with experience in data science, (operational, secure) Web services, and software design (for servers and clients, where the latter vary from Web pages to standalone apps and end-user programs). Economic Engine: OPeNDAP is an engineering services organization more than a product company, despite software being key to OPeNDAP's reputation. In essence, provision of engineering expertise, via contracts and grants, is the economic engine. Hence sustainability, as needed to address global grand challenges in geoscience, depends on agencies' and others' abilities and willingness to offer grants and let contracts for continually upgrading open-source software from OPeNDAP and others.

Connected Lighting System Interoperability Study Part 1: Application Programming Interfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaidon, Clement; Poplawski, Michael

First in a series of studies that focuses on interoperability as realized by the use of Application Programming Interfaces (APIs), explores the diversity of such interfaces in several connected lighting systems; characterizes the extent of interoperability that they provide; and illustrates challenges, limitations, and tradeoffs that were encountered during this exploration.

Enabling model checking for collaborative process analysis: from BPMN to `Network of Timed Automata'

NASA Astrophysics Data System (ADS)

Mallek, Sihem; Daclin, Nicolas; Chapurlat, Vincent; Vallespir, Bruno

2015-04-01

Interoperability is a prerequisite for partners involved in performing collaboration. As a consequence, the lack of interoperability is now considered a major obstacle. The research work presented in this paper aims to develop an approach that allows specifying and verifying a set of interoperability requirements to be satisfied by each partner in the collaborative process prior to process implementation. To enable the verification of these interoperability requirements, it is necessary first and foremost to generate a model of the targeted collaborative process; for this research effort, the standardised language BPMN 2.0 is used. Afterwards, a verification technique must be introduced, and model checking is the preferred option herein. This paper focuses on application of the model checker UPPAAL in order to verify interoperability requirements for the given collaborative process model. At first, this step entails translating the collaborative process model from BPMN into a UPPAAL modelling language called 'Network of Timed Automata'. Second, it becomes necessary to formalise interoperability requirements into properties with the dedicated UPPAAL language, i.e. the temporal logic TCTL.

A generative tool for building health applications driven by ISO 13606 archetypes.

PubMed

Menárguez-Tortosa, Marcos; Martínez-Costa, Catalina; Fernández-Breis, Jesualdo Tomás

2012-10-01

The use of Electronic Healthcare Records (EHR) standards in the development of healthcare applications is crucial for achieving the semantic interoperability of clinical information. Advanced EHR standards make use of the dual model architecture, which provides a solution for clinical interoperability based on the separation of the information and knowledge. However, the impact of such standards is biased by the limited availability of tools that facilitate their usage and practical implementation. In this paper, we present an approach for the automatic generation of clinical applications for the ISO 13606 EHR standard, which is based on the dual model architecture. This generator has been generically designed, so it can be easily adapted to other dual model standards and can generate applications for multiple technological platforms. Such good properties are based on the combination of standards for the representation of generic user interfaces and model-driven engineering techniques.

A component-based software environment for visualizing large macromolecular assemblies.

PubMed

Sanner, Michel F

2005-03-01

The interactive visualization of large biological assemblies poses a number of challenging problems, including the development of multiresolution representations and new interaction methods for navigating and analyzing these complex systems. An additional challenge is the development of flexible software environments that will facilitate the integration and interoperation of computational models and techniques from a wide variety of scientific disciplines. In this paper, we present a component-based software development strategy centered on the high-level, object-oriented, interpretive programming language: Python. We present several software components, discuss their integration, and describe some of their features that are relevant to the visualization of large molecular assemblies. Several examples are given to illustrate the interoperation of these software components and the integration of structural data from a variety of experimental sources. These examples illustrate how combining visual programming with component-based software development facilitates the rapid prototyping of novel visualization tools.

A Pragmatic Approach to Sustainable Interoperability for the Web 2.0 World

NASA Astrophysics Data System (ADS)

Wright, D. J.; Sankaran, S.

2015-12-01

In the geosciences, interoperability is a fundamental requirement. Members of various standards organizations such as the OGC and ISO-TC 211 have done yeomen services to promote a standards-centric approach to manage the interoperability challenges that organizations face today. The specific challenges that organizations face when adopting interoperability patterns are very many. One approach, that of mandating the use of specific standards has been reasonably successful. But scientific communities, as with all others, ultimately want their solutions to be widely accepted and used. And to this end there is a crying need to explore all possible interoperability patterns without restricting the choices to mandated standards. Standards are created by a slow and deliberative process that sometimes takes a long time to come to fruition and therefore sometime feel to fall short of user expectations. It seems therefore that organizations are left with a series of perceived orthogonal requirements when they want to pursue interoperability. They want a robust but agile solution, a mature approach that also needs to satisfy latest technology trends and so on. Sustainable interoperability patterns need to be forward looking and should choose the patterns and paradigms of the Web 2.0 generation. To this end, the key is to choose platform technologies that embrace multiple interoperability mechanisms that are built on fundamental "open" principles and which align with popular mainstream patterns. We seek to explore data-, metadata- and web service-related interoperability patterns through the prism of building solutions that encourage strong implementer and end-user engagement, improved usability and scalability considerations, and appealing developer frameworks that can grow the audience. The path to tread is not new, and the geocommunity only needs to observe and align its end goals with current Web 2.0 patterns to realize all the benefits that today we all take for granted as part of our everyday use of technology.

Promoting A-Priori Interoperability of HLA-Based Simulations in the Space Domain: The SISO Space Reference FOM Initiative

NASA Technical Reports Server (NTRS)

Moller, Bjorn; Garro, Alfredo; Falcone, Alberto; Crues, Edwin Z.; Dexter, Daniel E.

2016-01-01

Distributed and Real-Time Simulation plays a key-role in the Space domain being exploited for missions and systems analysis and engineering as well as for crew training and operational support. One of the most popular standards is the 1516-2010 IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA). HLA supports the implementation of distributed simulations (called Federations) in which a set of simulation entities (called Federates) can interact using a Run-Time Infrastructure (RTI). In a given Federation, a Federate can publish and/or subscribes objects and interactions on the RTI only in accordance with their structures as defined in a FOM (Federation Object Model). Currently, the Space domain is characterized by a set of incompatible FOMs that, although meet the specific needs of different organizations and projects, increases the long-term cost for interoperability. In this context, the availability of a reference FOM for the Space domain will enable the development of interoperable HLA-based simulators for related joint projects and collaborations among worldwide organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA). The paper presents a first set of results achieved by a SISO standardization effort that aims at providing a Space Reference FOM for international collaboration on Space systems simulations.

Groundwater data network interoperability

USGS Publications Warehouse

Brodaric, Boyan; Booth, Nathaniel; Boisvert, Eric; Lucido, Jessica M.

2016-01-01

Water data networks are increasingly being integrated to answer complex scientific questions that often span large geographical areas and cross political borders. Data heterogeneity is a major obstacle that impedes interoperability within and between such networks. It is resolved here for groundwater data at five levels of interoperability, within a Spatial Data Infrastructure architecture. The result is a pair of distinct national groundwater data networks for the United States and Canada, and a combined data network in which they are interoperable. This combined data network enables, for the first time, transparent public access to harmonized groundwater data from both sides of the shared international border.

Improving Patient Safety with X-Ray and Anesthesia Machine Ventilator Synchronization: A Medical Device Interoperability Case Study

NASA Astrophysics Data System (ADS)

Arney, David; Goldman, Julian M.; Whitehead, Susan F.; Lee, Insup

When a x-ray image is needed during surgery, clinicians may stop the anesthesia machine ventilator while the exposure is made. If the ventilator is not restarted promptly, the patient may experience severe complications. This paper explores the interconnection of a ventilator and simulated x-ray into a prototype plug-and-play medical device system. This work assists ongoing interoperability framework development standards efforts to develop functional and non-functional requirements and illustrates the potential patient safety benefits of interoperable medical device systems by implementing a solution to a clinical use case requiring interoperability.

Report on the Second Catalog Interoperability Workshop

NASA Technical Reports Server (NTRS)

Thieman, James R.; James, Mary E.

1988-01-01

The events, resolutions, and recommendations of the Second Catalog Interoperability Workshop, held at JPL in January, 1988, are discussed. This workshop dealt with the issues of standardization and communication among directories, catalogs, and inventories in the earth and space science data management environment. The Directory Interchange Format, being constructed as a standard for the exchange of directory information among participating data systems, is discussed. Involvement in the Interoperability effort by NASA, NOAA, ISGS, and NSF is described, and plans for future interoperability considered. The NASA Master Directory prototype is presented and critiqued and options for additional capabilities debated.

A logical approach to semantic interoperability in healthcare.

PubMed

Bird, Linda; Brooks, Colleen; Cheong, Yu Chye; Tun, Nwe Ni

2011-01-01

Singapore is in the process of rolling out a number of national e-health initiatives, including the National Electronic Health Record (NEHR). A critical enabler in the journey towards semantic interoperability is a Logical Information Model (LIM) that harmonises the semantics of the information structure with the terminology. The Singapore LIM uses a combination of international standards, including ISO 13606-1 (a reference model for electronic health record communication), ISO 21090 (healthcare datatypes), and SNOMED CT (healthcare terminology). The LIM is accompanied by a logical design approach, used to generate interoperability artifacts, and incorporates mechanisms for achieving unidirectional and bidirectional semantic interoperability.

Collaborative development of predictive toxicology applications

PubMed Central

2010-01-01

OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative) Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs) for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals. The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation. Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure-activity relationship modelling of REACH-relevant endpoints: ToxPredict which predicts and reports on toxicities for endpoints for an input chemical structure, and ToxCreate which builds and validates a predictive toxicity model based on an input toxicology dataset. Because of the extensible nature of the standardised Framework design, barriers of interoperability between applications and content are removed, as the user may combine data, models and validation from multiple sources in a dependable and time-effective way. PMID:20807436

Collaborative development of predictive toxicology applications.

PubMed

Hardy, Barry; Douglas, Nicki; Helma, Christoph; Rautenberg, Micha; Jeliazkova, Nina; Jeliazkov, Vedrin; Nikolova, Ivelina; Benigni, Romualdo; Tcheremenskaia, Olga; Kramer, Stefan; Girschick, Tobias; Buchwald, Fabian; Wicker, Joerg; Karwath, Andreas; Gütlein, Martin; Maunz, Andreas; Sarimveis, Haralambos; Melagraki, Georgia; Afantitis, Antreas; Sopasakis, Pantelis; Gallagher, David; Poroikov, Vladimir; Filimonov, Dmitry; Zakharov, Alexey; Lagunin, Alexey; Gloriozova, Tatyana; Novikov, Sergey; Skvortsova, Natalia; Druzhilovsky, Dmitry; Chawla, Sunil; Ghosh, Indira; Ray, Surajit; Patel, Hitesh; Escher, Sylvia

2010-08-31

OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative) Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs) for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals.The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation.Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure-activity relationship modelling of REACH-relevant endpoints: ToxPredict which predicts and reports on toxicities for endpoints for an input chemical structure, and ToxCreate which builds and validates a predictive toxicity model based on an input toxicology dataset. Because of the extensible nature of the standardised Framework design, barriers of interoperability between applications and content are removed, as the user may combine data, models and validation from multiple sources in a dependable and time-effective way.

Interoperability Between Coastal Web Atlases Using Semantic Mediation: A Case Study of the International Coastal Atlas Network (ICAN)

NASA Astrophysics Data System (ADS)

Wright, D. J.; Lassoued, Y.; Dwyer, N.; Haddad, T.; Bermudez, L. E.; Dunne, D.

2009-12-01

Coastal mapping plays an important role in informing marine spatial planning, resource management, maritime safety, hazard assessment and even national sovereignty. As such, there is now a plethora of data/metadata catalogs, pre-made maps, tabular and text information on resource availability and exploitation, and decision-making tools. A recent trend has been to encapsulate these in a special class of web-enabled geographic information systems called a coastal web atlas (CWA). While multiple benefits are derived from tailor-made atlases, there is great value added from the integration of disparate CWAs. CWAs linked to one another can query more successfully to optimize planning and decision-making. If a dataset is missing in one atlas, it may be immediately located in another. Similar datasets in two atlases may be combined to enhance study in either region. *But how best to achieve semantic interoperability to mitigate vague data queries, concepts or natural language semantics when retrieving and integrating data and information?* We report on the development of a new prototype seeking to interoperate between two initial CWAs: the Marine Irish Digital Atlas (MIDA) and the Oregon Coastal Atlas (OCA). These two mature atlases are used as a testbed for more regional connections, with the intent for the OCA to use lessons learned to develop a regional network of CWAs along the west coast, and for MIDA to do the same in building and strengthening atlas networks with the UK, Belgium, and other parts of Europe. Our prototype uses semantic interoperability via services harmonization and ontology mediation, allowing local atlases to use their own data structures, and vocabularies (ontologies). We use standard technologies such as OGC Web Map Services (WMS) for delivering maps, and OGC Catalogue Service for the Web (CSW) for delivering and querying ISO-19139 metadata. The metadata records of a given CWA use a given ontology of terms called local ontology. Human or machine users formulate their requests using a common ontology of metadata terms, called global ontology. A CSW mediator rewrites the user’s request into CSW requests over local CSWs using their own (local) ontologies, collects the results and sends them back to the user. To extend the system, we have recently added global maritime boundaries and are also considering nearshore ocean observing system data. Ongoing work includes adding WFS, error management, and exception handling, enabling Smart Searches, and writing full documentation. This prototype is a central research project of the new International Coastal Atlas Network (ICAN), a group of 30+ organizations from 14 nations (and growing) dedicated to seeking interoperability approaches to CWAs in support of coastal zone management and the translation of coastal science to coastal decision-making.

Method for modeling social care processes for national information exchange.

PubMed

Miettinen, Aki; Mykkänen, Juha; Laaksonen, Maarit

2012-01-01

Finnish social services include 21 service commissions of social welfare including Adoption counselling, Income support, Child welfare, Services for immigrants and Substance abuse care. This paper describes the method used for process modeling in the National project for IT in Social Services in Finland (Tikesos). The process modeling in the project aimed to support common national target state processes from the perspective of national electronic archive, increased interoperability between systems and electronic client documents. The process steps and other aspects of the method are presented. The method was developed, used and refined during the three years of process modeling in the national project.

Space Station Information System - Concepts and international issues

NASA Technical Reports Server (NTRS)

Williams, R. B.; Pruett, David; Hall, Dana L.

1987-01-01

The Space Station Information System (SSIS) is outlined in terms of its functions and probable physical facilities. The SSIS includes flight element systems as well as existing and planned institutional systems such as the NASA Communications System, the Tracking and Data Relay Satellite System, and the data and communications networks of the international partners. The SSIS strives to provide both a 'user friendly' environment and a software environment which will allow for software transportability and interoperability across the SSIS. International considerations are discussed as well as project management, software commonality, data communications standards, data security, documentation commonality, transaction management, data flow cross support, and key technologies.

Open Data and Open Science for better Research in the Geo and Space Domain

NASA Astrophysics Data System (ADS)

Ritschel, B.; Seelus, C.; Neher, G.; Iyemori, T.; Koyama, Y.; Yatagai, A. I.; Murayama, Y.; King, T. A.; Hughes, S.; Fung, S. F.; Galkin, I. A.; Hapgood, M. A.; Belehaki, A.

2015-12-01

Main open data principles had been worked out in the run-up and finally adopted in the Open Data Charta at the G8 summit in Lough Erne, Northern Ireland in June 2013. Important principles are also valid for science data, such as Open Data by Default, Quality and Quantity, Useable by All, Releasing Data for Improved Governance, Releasing Data for Innovation. There is also an explicit relationship to such areas of high values as earth observation, education and geospatial data. The European union implementation plan of the Open Data Charta identifies among other things objectives such as making data available in an open format, enabling semantic interoperability, ensuring quality, documentation and where appropriate reconciliation across different data sources, implementing software solutionsallowing easy management, publication or visualization of datasets and simplifying clearance of intellectual property rights.Open Science is not just a list of already for a longer time known principles but stands for a lot of initiatives and projects around a better handling of scientific data and openly shared scientific knowledge. It is also about transparency in methodology and collection of data, availability and reuse of scientific data, public accessibility to scientific communication and using of social media to facility scientific collaboration. Some projects are concentrating on open sharing of free and open source software and even further hardware in kind of processing capabilities. In addition question about the mashup of data and publication and an open peer review process are addressed.Following the principles of open data and open science the newest results of the collaboration efforts in mashing up the data servers related to the Japanese IUGONET, the European Union ESPAS and the GFZ ISDC semantic Web projects will be presented here. The semantic Web based approach for the mashup is focusing on the design and implementation of a common but still distributed data catalog based on semantical interoperability including the transparent access to data in relational data bases. References: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/207772/Open_Data_Charter.pdfhttp://www.openscience.org/blog/wp-content/uploads/2013/06/OpenSciencePoster.pdf

Enabling Interoperability - Supporting a Diversity of Search Paradigms Using Shared Ontologies and Federated Registries

NASA Astrophysics Data System (ADS)

Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Mattman, C. A.; Ramirez, P. M.

2009-12-01

Experience suggests that no single search paradigm will meet all of a community’s search requirements. Traditional forms based search is still considered critical by a significant percentage of most science communities. However text base and facet based search are improving the community’s perception that search can be easy and that the data is available and can be located. Finally semantic search promises ways to find data that were not conceived when the metadata was first captured and organized. This situation suggests that successful science information systems must be able to deploy new search applications quickly, efficiently, and often for ad-hoc purposes. Federated registries allow data to be packaged or associated with their metadata and managed as simple registry objects. Standard reference models for federated registries now exist that ensure registry objects are uniquely identified at registration and that versioning, classification, and cataloging are addressed automatically. Distributed but locally governed, federated registries also provide notification of registry events and federated query, linking, and replication of registry objects. Key principles for shared ontology development in the space sciences are that the ontology remains independent of its implementation and be extensible, flexible and scalable. The dichotomy between digital things and physical/conceptual things in the domain need to be unified under a standard model, such as the Open Archive Information System (OAIS) Information Object. Finally the fact must be accepted that ontology development is a difficult task that requires time, patience and experts in both the science domain and information modeling. The Planetary Data System (PDS) has adopted this architecture for it next generation information system, PDS 2010. The authors will report on progress, briefly describe key elements, and illustrate how the new system will be phased into operations to handle both legacy and new science data. In particular the shared ontology is being used to drive system implementation through the generation of standards documents and software configuration files. The resulting information system will help meet the expectations of modern scientists by providing more of the information interconnectedness, correlative science, and system interoperability that they desire. Fig.1 - Data Driven Architecture

Towards Standardized Patient Data Exchange: Integrating a FHIR Based API for the Open Medical Record System.

PubMed

Kasthurirathne, Suranga N; Mamlin, Burke; Grieve, Grahame; Biondich, Paul

2015-01-01

Interoperability is essential to address limitations caused by the ad hoc implementation of clinical information systems and the distributed nature of modern medical care. The HL7 V2 and V3 standards have played a significant role in ensuring interoperability for healthcare. FHIR is a next generation standard created to address fundamental limitations in HL7 V2 and V3. FHIR is particularly relevant to OpenMRS, an Open Source Medical Record System widely used across emerging economies. FHIR has the potential to allow OpenMRS to move away from a bespoke, application specific API to a standards based API. We describe efforts to design and implement a FHIR based API for the OpenMRS platform. Lessons learned from this effort were used to define long term plans to transition from the legacy OpenMRS API to a FHIR based API that greatly reduces the learning curve for developers and helps enhance adhernce to standards.

Interoperability Measurement

DTIC Science & Technology

2008-08-01

facilitate the use of existing architecture descriptions in performing interoperability measurement. Noting that “everything in the world can be expressed as...biological, botanical, and genetic research, it has also been used with great success in the fields of ecology, medicine, the social sciences, the...appropriate for at least three reasons. First, systems perform different interoperations in different scenarios (i.e., they are used differently); second

Commanding Heterogeneous Multi-Robot Teams

DTIC Science & Technology

2014-06-01

Coalition Battle Management Language (C-BML) Study Group Report. 2005 Fall Simulation Interoperability Workshop (05F- SIW - 041), Orlando, FL, September...NMSG-085 CIG Land Operation Demonstration. 2013 Spring Simulation Interoperability Workshop (13S- SIW -031), San Diego, CA. April 2013. [4] K...Simulation Interoperability Workshop (10F- SIW -039), Orlando, FL, September 2010. [5] M. Langerwisch, M. Ax, S. Thamke, T. Remmersmann, A. Tiderko

DeoR repression at-a-distance only weakly responds to changes in interoperator separation and DNA topology.

PubMed Central

Dandanell, G

1992-01-01

The interoperator distance between a synthetic operator Os and the deoP2O2-galK fusion was varied between 46 and 176 bp. The repression of the deoP2 directed galK expression as a function of the interoperator distance (center-to-center) was measured in vivo in a single-copy system. The results show that the DeoR repressor efficiently can repress transcription at all the interoperator distances tested. The degree of repression depends very little on the spacing between the operators, however, a weak periodic dependency of 8-11 bp may exist. PMID:1437558

Reconciling disparate information in continuity of care documents: Piloting a system to consolidate structured clinical documents.

PubMed

Hosseini, Masoud; Jones, Josette; Faiola, Anthony; Vreeman, Daniel J; Wu, Huanmei; Dixon, Brian E

2017-10-01

Due to the nature of information generation in health care, clinical documents contain duplicate and sometimes conflicting information. Recent implementation of Health Information Exchange (HIE) mechanisms in which clinical summary documents are exchanged among disparate health care organizations can proliferate duplicate and conflicting information. To reduce information overload, a system to automatically consolidate information across multiple clinical summary documents was developed for an HIE network. The system receives any number of Continuity of Care Documents (CCDs) and outputs a single, consolidated record. To test the system, a randomly sampled corpus of 522 CCDs representing 50 unique patients was extracted from a large HIE network. The automated methods were compared to manual consolidation of information for three key sections of the CCD: problems, allergies, and medications. Manual consolidation of 11,631 entries was completed in approximately 150h. The same data were automatically consolidated in 3.3min. The system successfully consolidated 99.1% of problems, 87.0% of allergies, and 91.7% of medications. Almost all of the inaccuracies were caused by issues involving the use of standardized terminologies within the documents to represent individual information entries. This study represents a novel, tested tool for de-duplication and consolidation of CDA documents, which is a major step toward improving information access and the interoperability among information systems. While more work is necessary, automated systems like the one evaluated in this study will be necessary to meet the informatics needs of providers and health systems in the future. Copyright © 2017 Elsevier Inc. All rights reserved.

Cohort Selection and Management Application Leveraging Standards-based Semantic Interoperability and a Groovy DSL

PubMed Central

Bucur, Anca; van Leeuwen, Jasper; Chen, Njin-Zu; Claerhout, Brecht; de Schepper, Kristof; Perez-Rey, David; Paraiso-Medina, Sergio; Alonso-Calvo, Raul; Mehta, Keyur; Krykwinski, Cyril

2016-01-01

This paper describes a new Cohort Selection application implemented to support streamlining the definition phase of multi-centric clinical research in oncology. Our approach aims at both ease of use and precision in defining the selection filters expressing the characteristics of the desired population. The application leverages our standards-based Semantic Interoperability Solution and a Groovy DSL to provide high expressiveness in the definition of filters and flexibility in their composition into complex selection graphs including splits and merges. Widely-adopted ontologies such as SNOMED-CT are used to represent the semantics of the data and to express concepts in the application filters, facilitating data sharing and collaboration on joint research questions in large communities of clinical users. The application supports patient data exploration and efficient collaboration in multi-site, heterogeneous and distributed data environments. PMID:27570644

On the Execution Control of HLA Federations using the SISO Space Reference FOM

NASA Technical Reports Server (NTRS)

Moller, Bjorn; Garro, Alfredo; Falcone, Alberto; Crues, Edwin Z.; Dexter, Daniel E.

2017-01-01

In the Space domain the High Level Architecture (HLA) is one of the reference standard for Distributed Simulation. However, for the different organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA) and their industrial partners, it is difficult to implement HLA simulators (called Federates) able to interact and interoperate in the context of a distributed HLA simulation (called Federation). The lack of a common FOM (Federation Object Model) for the Space domain is one of the main reasons that precludes a-priori interoperability between heterogeneous federates. To fill this lack a Product Development Group (PDG) has been recently activated in the Simulation Interoperability Standards Organization (SISO) with the aim to provide a Space Reference FOM (SRFOM) for international collaboration on Space systems simulations. Members of the PDG come from several countries and contribute experiences from projects within NASA, ESA and other organizations. Participants represent government, academia and industry. The paper presents an overview of the ongoing Space Reference FOM standardization initiative by focusing on the solution provided for managing the execution of an SRFOM-based Federation.

Integrating the healthcare enterprise in radiation oncology plug and play--the future of radiation oncology?

PubMed

Abdel-Wahab, May; Rengan, Ramesh; Curran, Bruce; Swerdloff, Stuart; Miettinen, Mika; Field, Colin; Ranjitkar, Sunita; Palta, Jatinder; Tripuraneni, Prabhakar

2010-02-01

To describe the processes and benefits of the integrating healthcare enterprises in radiation oncology (IHE-RO). The IHE-RO process includes five basic steps. The first step is to identify common interoperability issues encountered in radiation treatment planning and the delivery process. IHE-RO committees partner with vendors to develop solutions (integration profiles) to interoperability problems. The broad application of these integration profiles across a variety of vender platforms is tested annually at the Connectathon event. Demonstration of the seamless integration and transfer of patient data to the potential users are then presented by vendors at the public demonstration event. Users can then integrate these profiles into requests for proposals and vendor contracts by institutions. Incorporation of completed integration profiles into requests for proposals can be done when purchasing new equipment. Vendors can publish IHE integration statements to document the integration profiles supported by their products. As a result, users can reference integration profiles in requests for proposals, simplifying the systems acquisition process. These IHE-RO solutions are now available in many of the commercial radiation oncology-related treatment planning, delivery, and information systems. They are also implemented at cancer care sites around the world. IHE-RO serves an important purpose for the radiation oncology community at large. Copyright 2010 Elsevier Inc. All rights reserved.

Large Scale eHealth Deployment in Europe: Insights from Concurrent Use of Standards.

PubMed

Eichelberg, Marco; Chronaki, Catherine

2016-01-01

Large-scale eHealth deployment projects face a major challenge when called to select the right set of standards and tools to achieve sustainable interoperability in an ecosystem including both legacy systems and new systems reflecting technological trends and progress. There is not a single standard that would cover all needs of an eHealth project, and there is a multitude of overlapping and perhaps competing standards that can be employed to define document formats, terminology, communication protocols mirroring alternative technical approaches and schools of thought. eHealth projects need to respond to the important question of how alternative or inconsistently implemented standards and specifications can be used to ensure practical interoperability and long-term sustainability in large scale eHealth deployment. In the eStandards project, 19 European case studies reporting from R&D and large-scale eHealth deployment and policy projects were analyzed. Although this study is not exhaustive, reflecting on the concepts, standards, and tools for concurrent use and the successes, failures, and lessons learned, this paper offers practical insights on how eHealth deployment projects can make the most of the available eHealth standards and tools and how standards and profile developing organizations can serve the users embracing sustainability and technical innovation.

Health Informatics for Development: a Three-pronged Strategy of Partnerships, Standards, and Mobile Health. Contribution of the IMIA Working Group on Health Informatics for Development.

PubMed

Marcelo, A; Adejumo, A; Luna, D

2011-01-01

Describe the issues surrounding health informatics in developing countries and the challenges faced by practitioners in building internal capacity. From these issues, the authors propose cost-effective strategies that can fast track health informatics development in these low to medium income countries (LMICs). The authors conducted a review of literature and consulted key opinion leaders who have experience with health informatics implementations around the world. Despite geographic and cultural differences, many LMICs share similar challenges and opportunities in developing health informatics. Partnerships, standards, and inter-operability are well known components of successful informatics programs. Establishing partnerships can be comprised of formal inter-institutional collaborations on training and research, collaborative open source software development, and effective use of social networking. Lacking legacy systems, LMICs can discuss standards and inter-operability more openly and have greater potential for success. Lastly, since cellphones are pervasive in developing countries, they can be leveraged as access points for delivering and documenting health services in remote under-served areas. Mobile health or mHealth gives LMICs a unique opportunity to leapfrog through most issues that have plagued health informatics in developed countries. By employing this proposed roadmap, LMICs can now develop capacity for health informatics using appropriate and cost-effective technologies.

Metadata and Service at the GFZ ISDC Portal

NASA Astrophysics Data System (ADS)

Ritschel, B.

2008-05-01

The online service portal of the GFZ Potsdam Information System and Data Center (ISDC) is an access point for all manner of geoscientific geodata, its corresponding metadata, scientific documentation and software tools. At present almost 2000 national and international users and user groups have the opportunity to request Earth science data from a portfolio of 275 different products types and more than 20 Million single data files with an added volume of approximately 12 TByte. The majority of the data and information, the portal currently offers to the public, are global geomonitoring products such as satellite orbit and Earth gravity field data as well as geomagnetic and atmospheric data for the exploration. These products for Earths changing system are provided via state-of-the art retrieval techniques. The data product catalog system behind these techniques is based on the extensive usage of standardized metadata, which are describing the different geoscientific product types and data products in an uniform way. Where as all ISDC product types are specified by NASA's Directory Interchange Format (DIF), Version 9.0 Parent XML DIF metadata files, the individual data files are described by extended DIF metadata documents. Depending on the beginning of the scientific project, one part of data files are described by extended DIF, Version 6 metadata documents and the other part are specified by data Child XML DIF metadata documents. Both, the product type dependent parent DIF metadata documents and the data file dependent child DIF metadata documents are derived from a base-DIF.xsd xml schema file. The ISDC metadata philosophy defines a geoscientific product as a package consisting of mostly one or sometimes more than one data file plus one extended DIF metadata file. Because NASA's DIF metadata standard has been developed in order to specify a collection of data only, the extension of the DIF standard consists of new and specific attributes, which are necessary for an explicit identification of single data files and the set-up of a comprehensive Earth science data catalog. The huge ISDC data catalog is realized by product type dependent tables filled with data file related metadata, which have relations to corresponding metadata tables. The product type describing parent DIF XML metadata documents are stored and managed in ORACLE's XML storage structures. In order to improve the interoperability of the ISDC service portal, the existing proprietary catalog system will be extended by an ISO 19115 based web catalog service. In addition to this development there is ISDC related concerning semantic network of different kind of metadata resources, like different kind of standardized and not-standardized metadata documents and literature as well as Web 2.0 user generated information derived from tagging activities and social navigation data.

A federated semantic metadata registry framework for enabling interoperability across clinical research and care domains.

PubMed

Sinaci, A Anil; Laleci Erturkmen, Gokce B

2013-10-01

In order to enable secondary use of Electronic Health Records (EHRs) by bridging the interoperability gap between clinical care and research domains, in this paper, a unified methodology and the supporting framework is introduced which brings together the power of metadata registries (MDR) and semantic web technologies. We introduce a federated semantic metadata registry framework by extending the ISO/IEC 11179 standard, and enable integration of data element registries through Linked Open Data (LOD) principles where each Common Data Element (CDE) can be uniquely referenced, queried and processed to enable the syntactic and semantic interoperability. Each CDE and their components are maintained as LOD resources enabling semantic links with other CDEs, terminology systems and with implementation dependent content models; hence facilitating semantic search, much effective reuse and semantic interoperability across different application domains. There are several important efforts addressing the semantic interoperability in healthcare domain such as IHE DEX profile proposal, CDISC SHARE and CDISC2RDF. Our architecture complements these by providing a framework to interlink existing data element registries and repositories for multiplying their potential for semantic interoperability to a greater extent. Open source implementation of the federated semantic MDR framework presented in this paper is the core of the semantic interoperability layer of the SALUS project which enables the execution of the post marketing safety analysis studies on top of existing EHR systems. Copyright © 2013 Elsevier Inc. All rights reserved.

[Lessons learned in the implementation of interoperable National Health Information Systems: a systematic review].

PubMed

Ovies-Bernal, Diana Paola; Agudelo-Londoño, Sandra M

2014-01-01

Identify shared criteria used throughout the world in the implementation of interoperable National Health Information Systems (NHIS) and provide validated scientific information on the dimensions affecting interoperability. This systematic review sought to identify primary articles on the implementation of interoperable NHIS published in scientific journals in English, Portuguese, or Spanish between 1990 and 2011 through a search of eight databases of electronic journals in the health sciences and informatics: MEDLINE (PubMed), Proquest, Ovid, EBSCO, MD Consult, Virtual Health Library, Metapress, and SciELO. The full texts of the articles were reviewed, and those that focused on technical computer aspects or on normative issues were excluded, as well as those that did not meet the quality criteria for systematic reviews of interventions. Of 291 studies found and reviewed, only five met the inclusion criteria. These articles reported on the process of implementing an interoperable NHIS in Brazil, China, the United States, Turkey, and the Semiautonomous Region of Zanzíbar, respectively. Five common basic criteria affecting implementation of the NHIS were identified: standards in place to govern the process, availability of trained human talent, financial and structural constraints, definition of standards, and assurance that the information is secure. Four dimensions affecting interoperability were defined: technical, semantic, legal, and organizational. The criteria identified have to be adapted to the actual situation in each country and a proactive approach should be used to ensure that implementation of the interoperable NHIS is strategic, simple, and reliable.

Interoperability challenges in river discharge modelling: A cross domain application scenario

NASA Astrophysics Data System (ADS)

Santoro, Mattia; Andres, Volker; Jirka, Simon; Koike, Toshio; Looser, Ulrich; Nativi, Stefano; Pappenberger, Florian; Schlummer, Manuela; Strauch, Adrian; Utech, Michael; Zsoter, Ervin

2018-06-01

River discharge is a critical water cycle variable, as it integrates all the processes (e.g. runoff and evapotranspiration) occurring within a river basin and provides a hydrological output variable that can be readily measured. Its prediction is of invaluable help for many water-related tasks including water resources assessment and management, flood protection, and disaster mitigation. Observations of river discharge are important to calibrate and validate hydrological or coupled land, atmosphere and ocean models. This requires using datasets from different scientific domains (Water, Weather, etc.). Typically, such datasets are provided using different technological solutions. This complicates the integration of new hydrological data sources into application systems. Therefore, a considerable effort is often spent on data access issues instead of the actual scientific question. This paper describes the work performed to address multidisciplinary interoperability challenges related to river discharge modeling and validation. This includes definition and standardization of domain specific interoperability standards for hydrological data sharing and their support in global frameworks such as the Global Earth Observation System of Systems (GEOSS). The research was developed in the context of the EU FP7-funded project GEOWOW (GEOSS Interoperability for Weather, Ocean and Water), which implemented a "River Discharge" application scenario. This scenario demonstrates the combination of river discharge observations data from the Global Runoff Data Centre (GRDC) database and model outputs produced by the European Centre for Medium-Range Weather Forecasts (ECMWF) predicting river discharge based on weather forecast information in the context of the GEOSS.

A common layer of interoperability for biomedical ontologies based on OWL EL.

PubMed

Hoehndorf, Robert; Dumontier, Michel; Oellrich, Anika; Wimalaratne, Sarala; Rebholz-Schuhmann, Dietrich; Schofield, Paul; Gkoutos, Georgios V

2011-04-01

Ontologies are essential in biomedical research due to their ability to semantically integrate content from different scientific databases and resources. Their application improves capabilities for querying and mining biological knowledge. An increasing number of ontologies is being developed for this purpose, and considerable effort is invested into formally defining them in order to represent their semantics explicitly. However, current biomedical ontologies do not facilitate data integration and interoperability yet, since reasoning over these ontologies is very complex and cannot be performed efficiently or is even impossible. We propose the use of less expressive subsets of ontology representation languages to enable efficient reasoning and achieve the goal of genuine interoperability between ontologies. We present and evaluate EL Vira, a framework that transforms OWL ontologies into the OWL EL subset, thereby enabling the use of tractable reasoning. We illustrate which OWL constructs and inferences are kept and lost following the conversion and demonstrate the performance gain of reasoning indicated by the significant reduction of processing time. We applied EL Vira to the open biomedical ontologies and provide a repository of ontologies resulting from this conversion. EL Vira creates a common layer of ontological interoperability that, for the first time, enables the creation of software solutions that can employ biomedical ontologies to perform inferences and answer complex queries to support scientific analyses. The EL Vira software is available from http://el-vira.googlecode.com and converted OBO ontologies and their mappings are available from http://bioonto.gen.cam.ac.uk/el-ont.

Device interoperability and authentication for telemedical appliance based on the ISO/IEEE 11073 Personal Health Device (PHD) Standards.

PubMed

Caranguian, Luther Paul R; Pancho-Festin, Susan; Sison, Luis G

2012-01-01

In this study, we focused on the interoperability and authentication of medical devices in the context of telemedical systems. A recent standard called the ISO/IEEE 11073 Personal Health Device (X73-PHD) Standards addresses the device interoperability problem by defining common protocols for agent (medical device) and manager (appliance) interface. The X73-PHD standard however has not addressed security and authentication of medical devices which is important in establishing integrity of a telemedical system. We have designed and implemented a security policy within the X73-PHD standards. The policy will enable device authentication using Asymmetric-Key Cryptography and the RSA algorithm as the digital signature scheme. We used two approaches for performing the digital signatures: direct software implementation and use of embedded security modules (ESM). The two approaches were evaluated and compared in terms of execution time and memory requirement. For the standard 2048-bit RSA, ESM calculates digital signatures only 12% of the total time for the direct implementation. Moreover, analysis shows that ESM offers more security advantage such as secure storage of keys compared to using direct implementation. Interoperability with other systems was verified by testing the system with LNI Healthlink, a manager software that implements the X73-PHD standard. Lastly, security analysis was done and the system's response to common attacks on authentication systems was analyzed and several measures were implemented to protect the system against them.

LVC Architecture Roadmap Implementation - Results of the First Two Years

DTIC Science & Technology

2012-03-01

NOTES Presented at the Simulation Interoperability Standards Organization?s (SISO) Spring Simulation Interoperability Workshop ( SIW ), 26-30 March...presented at the semi-annual Simulation Interoperability Workshops ( SIWs ) and the annual Interservice/Industry Training, Simulation & Education Conference...I/ITSEC), as well as other venues. For example, a full-day workshop on the initial progress of the effort was conducted at the 2010 Spring SIW [2

NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

NASA Technical Reports Server (NTRS)

Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

2000-01-01

The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

A VO-Driven Astronomical Data Grid in China

NASA Astrophysics Data System (ADS)

Cui, C.; He, B.; Yang, Y.; Zhao, Y.

2010-12-01

With the implementation of many ambitious observation projects, including LAMOST, FAST, and Antarctic observatory at Doom A, observational astronomy in China is stepping into a brand new era with emerging data avalanche. In the era of e-Science, both these cutting-edge projects and traditional astronomy research need much more powerful data management, sharing and interoperability. Based on data-grid concept, taking advantages of the IVOA interoperability technologies, China-VO is developing a VO-driven astronomical data grid environment to enable multi-wavelength science and large database science. In the paper, latest progress and data flow of the LAMOST, architecture of the data grid, and its supports to the VO are discussed.

Open Architecture SDR for Space

NASA Technical Reports Server (NTRS)

Smith, Carl; Long, Chris; Liebetreu, John; Reinhart, Richard C.

2005-01-01

This paper describes an open-architecture SDR (software defined radio) infrastructure that is suitable for space-based operations (Space-SDR). SDR technologies will endow space and planetary exploration systems with dramatically increased capability, reduced power consumption, and significantly less mass than conventional systems, at costs reduced by vigorous competition, hardware commonality, dense integration, reduced obsolescence, interoperability, and software re-use. Significant progress has been recorded on developments like the Joint Tactical Radio System (JSTRS) Software Communication Architecture (SCA), which is oriented toward reconfigurable radios for defense forces operating in multiple theaters of engagement. The JTRS-SCA presents a consistent software interface for waveform development, and facilitates interoperability, waveform portability, software re-use, and technology evolution.

Operational Plan Ontology Model for Interconnection and Interoperability

NASA Astrophysics Data System (ADS)

Long, F.; Sun, Y. K.; Shi, H. Q.

2017-03-01

Aiming at the assistant decision-making system’s bottleneck of processing the operational plan data and information, this paper starts from the analysis of the problem of traditional expression and the technical advantage of ontology, and then it defines the elements of the operational plan ontology model and determines the basis of construction. Later, it builds up a semi-knowledge-level operational plan ontology model. Finally, it probes into the operational plan expression based on the operational plan ontology model and the usage of the application software. Thus, this paper has the theoretical significance and application value in the improvement of interconnection and interoperability of the operational plan among assistant decision-making systems.

.NET INTEROPERABILITY GUIDELINES

EPA Science Inventory

The CAPE-OPEN middleware standards were created to allow process modelling components (PMCs) developed by third parties to be used in any process modelling environment (PME) utilizing these standards. The CAPE-OPEN middleware specifications were based upon both Microsoft's Compo...

A cloud based brokering framework to support hydrology at global scale

NASA Astrophysics Data System (ADS)

Boldrini, E.; Pecora, S.; Bordini, F.; Nativi, S.

2016-12-01

This work presents the hydrology broker designed and deployed in the context of a collaboration between the Regional Agency for Environmental Protection in the Italian region Emilia-Romagna (ARPA-ER) and CNR-IIA (National Research Council of Italy). The hydrology brokering platform eases the task of discovering and accessing hydrological observation data, usually acquired and made available by national agencies by means of a set of heterogeneous services (e.g. CUAHSI HIS servers, OGC services, FTP servers) and formats (e.g. WaterML, O&M, ...). The hydrology broker makes all the already published data available according to one or more of the desired and well known discovery protocols, access protocols, and formats . As a result, the user is able to search and access the available hydrological data through his preferred client (e.g. CUAHSI HydroDesktop, 52North SWE client). It is also easy to build a hydrological web portal on top of the broker, using the user friendly js API. The hydrology broker has been deployed on the Amazon cloud to ensure scalability and tested in the context of the work of the Commission for Hydrology of WMO on three different scenarios: the La Plata river basin, the Sava river basin and the Arctic-HYCOS project. In each scenario the hydrology broker discovered and accessed heterogeneous data formats (e.g. Waterml 1.0/2.0, proprietary CSV documents) from the heterogeneous services (e.g. CUAHSI HIS servers, FTP service and agency proprietary services) managed by several national agencies and international commissions. The hydrology broker made possible to present all the available data uniformly through the user desired service type and format (e.g. an HIS server publishing Waterml 2.0), producing a great improvement in both system interoperability and data exchange. Interoperability tests were also successfully conducted with WMO Information System (WIS) nodes, making possible for a specific Global Information Center System (GISC) to gather the available hydrological records as ISO 19115:2007 metadata documents through the OAI-PMH interface exposed by the broker. The framework flexibility makes it also easy to add other sources, as well as additional published interfaces, in order to cope with the future standard requirements needed by the hydrological community.

MAPI: a software framework for distributed biomedical applications

PubMed Central

2013-01-01

Background The amount of web-based resources (databases, tools etc.) in biomedicine has increased, but the integrated usage of those resources is complex due to differences in access protocols and data formats. However, distributed data processing is becoming inevitable in several domains, in particular in biomedicine, where researchers face rapidly increasing data sizes. This big data is difficult to process locally because of the large processing, memory and storage capacity required. Results This manuscript describes a framework, called MAPI, which provides a uniform representation of resources available over the Internet, in particular for Web Services. The framework enhances their interoperability and collaborative use by enabling a uniform and remote access. The framework functionality is organized in modules that can be combined and configured in different ways to fulfil concrete development requirements. Conclusions The framework has been tested in the biomedical application domain where it has been a base for developing several clients that are able to integrate different web resources. The MAPI binaries and documentation are freely available at http://www.bitlab-es.com/mapi under the Creative Commons Attribution-No Derivative Works 2.5 Spain License. The MAPI source code is available by request (GPL v3 license). PMID:23311574

A comparison of data interoperability approaches of fusion codes with application to synthetic diagnostics

NASA Astrophysics Data System (ADS)

Kruger, Scott; Shasharina, S.; Vadlamani, S.; McCune, D.; Holland, C.; Jenkins, T. G.; Candy, J.; Cary, J. R.; Hakim, A.; Miah, M.; Pletzer, A.

2010-11-01

As various efforts to integrate fusion codes proceed worldwide, standards for sharing data have emerged. In the U.S., the SWIM project has pioneered the development of the Plasma State, which has a flat-hierarchy and is dominated by its use within 1.5D transport codes. The European Integrated Tokamak Modeling effort has developed a more ambitious data interoperability effort organized around the concept of Consistent Physical Objects (CPOs). CPOs have deep hierarchies as needed by an effort that seeks to encompass all of fusion computing. Here, we discuss ideas for implementing data interoperability that is complementary to both the Plasma State and CPOs. By making use of attributes within the netcdf and HDF5 binary file formats, the goals of data interoperability can be achieved with a more informal approach. In addition, a file can be simultaneously interoperable to several standards at once. As an illustration of this approach, we discuss its application to the development of synthetic diagnostics that can be used for multiple codes.

Ontology Mappings to Improve Learning Resource Search

ERIC Educational Resources Information Center

Gasevic, Dragan; Hatala, Marek

2006-01-01

This paper proposes an ontology mapping-based framework that allows searching for learning resources using multiple ontologies. The present applications of ontologies in e-learning use various ontologies (eg, domain, curriculum, context), but they do not give a solution on how to interoperate e-learning systems based on different ontologies. The…

An Interoperable Electronic Medical Record-Based Platform for Personalized Predictive Analytics

ERIC Educational Resources Information Center

Abedtash, Hamed

2017-01-01

Precision medicine refers to the delivering of customized treatment to patients based on their individual characteristics, and aims to reduce adverse events, improve diagnostic methods, and enhance the efficacy of therapies. Among efforts to achieve the goals of precision medicine, researchers have used observational data for developing predictive…

Development of Health Information Search Engine Based on Metadata and Ontology

PubMed Central

Song, Tae-Min; Jin, Dal-Lae

2014-01-01

Objectives The aim of the study was to develop a metadata and ontology-based health information search engine ensuring semantic interoperability to collect and provide health information using different application programs. Methods Health information metadata ontology was developed using a distributed semantic Web content publishing model based on vocabularies used to index the contents generated by the information producers as well as those used to search the contents by the users. Vocabulary for health information ontology was mapped to the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), and a list of about 1,500 terms was proposed. The metadata schema used in this study was developed by adding an element describing the target audience to the Dublin Core Metadata Element Set. Results A metadata schema and an ontology ensuring interoperability of health information available on the internet were developed. The metadata and ontology-based health information search engine developed in this study produced a better search result compared to existing search engines. Conclusions Health information search engine based on metadata and ontology will provide reliable health information to both information producer and information consumers. PMID:24872907

Development of health information search engine based on metadata and ontology.

PubMed

Song, Tae-Min; Park, Hyeoun-Ae; Jin, Dal-Lae

2014-04-01

The aim of the study was to develop a metadata and ontology-based health information search engine ensuring semantic interoperability to collect and provide health information using different application programs. Health information metadata ontology was developed using a distributed semantic Web content publishing model based on vocabularies used to index the contents generated by the information producers as well as those used to search the contents by the users. Vocabulary for health information ontology was mapped to the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), and a list of about 1,500 terms was proposed. The metadata schema used in this study was developed by adding an element describing the target audience to the Dublin Core Metadata Element Set. A metadata schema and an ontology ensuring interoperability of health information available on the internet were developed. The metadata and ontology-based health information search engine developed in this study produced a better search result compared to existing search engines. Health information search engine based on metadata and ontology will provide reliable health information to both information producer and information consumers.

OntoCR: A CEN/ISO-13606 clinical repository based on ontologies.

PubMed

Lozano-Rubí, Raimundo; Muñoz Carrero, Adolfo; Serrano Balazote, Pablo; Pastor, Xavier

2016-04-01

To design a new semantically interoperable clinical repository, based on ontologies, conforming to CEN/ISO 13606 standard. The approach followed is to extend OntoCRF, a framework for the development of clinical repositories based on ontologies. The meta-model of OntoCRF has been extended by incorporating an OWL model integrating CEN/ISO 13606, ISO 21090 and SNOMED CT structure. This approach has demonstrated a complete evaluation cycle involving the creation of the meta-model in OWL format, the creation of a simple test application, and the communication of standardized extracts to another organization. Using a CEN/ISO 13606 based system, an indefinite number of archetypes can be merged (and reused) to build new applications. Our approach, based on the use of ontologies, maintains data storage independent of content specification. With this approach, relational technology can be used for storage, maintaining extensibility capabilities. The present work demonstrates that it is possible to build a native CEN/ISO 13606 repository for the storage of clinical data. We have demonstrated semantic interoperability of clinical information using CEN/ISO 13606 extracts. Copyright © 2016 Elsevier Inc. All rights reserved.

Interoperability in planetary research for geospatial data analysis

NASA Astrophysics Data System (ADS)

Hare, Trent M.; Rossi, Angelo P.; Frigeri, Alessandro; Marmo, Chiara

2018-01-01

For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on mapping standards that embrace standardized geospatial image formats, geologic mapping conventions, U.S. Federal Geographic Data Committee (FGDC) cartographic and metadata standards, and notably on-line mapping services as defined by the Open Geospatial Consortium (OGC). The latter includes defined standards such as the OGC Web Mapping Services (simple image maps), Web Map Tile Services (cached image tiles), Web Feature Services (feature streaming), Web Coverage Services (rich scientific data streaming), and Catalog Services for the Web (data searching and discoverability). While these standards were developed for application to Earth-based data, they can be just as valuable for planetary domain. Another initiative, called VESPA (Virtual European Solar and Planetary Access), will marry several of the above geoscience standards and astronomy-based standards as defined by International Virtual Observatory Alliance (IVOA). This work outlines the current state of interoperability initiatives in use or in the process of being researched within the planetary geospatial community.

IT Labs Proof-of-Concept Project: Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Ingalls, John; Bengtsson, Kjell

2014-01-01

No known system is in place to allow NASA technical data interoperability throughout the whole life cycle. Life Cycle Cost (LCC) will be higher on many developing programs if action isn't taken soon to join disparate systems efficiently. Disparate technical data also increases safety risks from poorly integrated elements. NASA requires interoperability and industry standards, but breaking legacy ways is a challenge.

Interacting with Multi-Robot Systems Using BML

DTIC Science & Technology

2013-06-01

Pullen, U. Schade, J. Simonsen & R. Gomez-Veiga, NATO MSG-048 C-BML Final Report Summary. 2010 Fall Simulation Interoperability Workshop (10F- SIW -039...NATO MSG-085. 2012 Spring Simulation Interoperability Workshop (12S- SIW -045), Orlando, FL, March 2012. [3] T. Remmersmann, U. Schade, L. Khimeche...B. Grautreau & R. El Abdouni Khayari, Lessons Recognized: How to Combine BML and MSDL. 2012 Spring Simulation Interoperability Workshop (12S- SIW -012

A Linguistic Foundation for Communicating Geo-Information in the context of BML and geoBML

DTIC Science & Technology

2010-03-23

BML Standard. 2009 Spring Simulation Interoperability Workshop (09S- SIW -046). San Diego, CA. Rein, K., Schade, U. & Hieb, M.R. (2009). Battle...Formalizing Battle Management Language: A Grammar for Specifying Orders. 2006 Spring Simulation Interoperability Workshop (06S- SIW - 068). Huntsville...Hieb, M.R. (2007). Battle Management Language: A Grammar for Specifying Reports. 2007 Spring Simulation Interoperability Workshop (07S- SIW -036

Semantic and syntactic interoperability in online processing of big Earth observation data.

PubMed

Sudmanns, Martin; Tiede, Dirk; Lang, Stefan; Baraldi, Andrea

2018-01-01

The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover).

Semantic and syntactic interoperability in online processing of big Earth observation data

PubMed Central

Sudmanns, Martin; Tiede, Dirk; Lang, Stefan; Baraldi, Andrea

2018-01-01

ABSTRACT The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover). PMID:29387171

Publication, discovery and interoperability of Clinical Decision Support Systems: A Linked Data approach.

PubMed

Marco-Ruiz, Luis; Pedrinaci, Carlos; Maldonado, J A; Panziera, Luca; Chen, Rong; Bellika, J Gustav

2016-08-01

The high costs involved in the development of Clinical Decision Support Systems (CDSS) make it necessary to share their functionality across different systems and organizations. Service Oriented Architectures (SOA) have been proposed to allow reusing CDSS by encapsulating them in a Web service. However, strong barriers in sharing CDS functionality are still present as a consequence of lack of expressiveness of services' interfaces. Linked Services are the evolution of the Semantic Web Services paradigm to process Linked Data. They aim to provide semantic descriptions over SOA implementations to overcome the limitations derived from the syntactic nature of Web services technologies. To facilitate the publication, discovery and interoperability of CDS services by evolving them into Linked Services that expose their interfaces as Linked Data. We developed methods and models to enhance CDS SOA as Linked Services that define a rich semantic layer based on machine interpretable ontologies that powers their interoperability and reuse. These ontologies provided unambiguous descriptions of CDS services properties to expose them to the Web of Data. We developed models compliant with Linked Data principles to create a semantic representation of the components that compose CDS services. To evaluate our approach we implemented a set of CDS Linked Services using a Web service definition ontology. The definitions of Web services were linked to the models developed in order to attach unambiguous semantics to the service components. All models were bound to SNOMED-CT and public ontologies (e.g. Dublin Core) in order to count on a lingua franca to explore them. Discovery and analysis of CDS services based on machine interpretable models was performed reasoning over the ontologies built. Linked Services can be used effectively to expose CDS services to the Web of Data by building on current CDS standards. This allows building shared Linked Knowledge Bases to provide machine interpretable semantics to the CDS service description alleviating the challenges on interoperability and reuse. Linked Services allow for building 'digital libraries' of distributed CDS services that can be hosted and maintained in different organizations. Copyright © 2016 Elsevier Inc. All rights reserved.

A Virtual Observatory Approach to Planetary Data for Vesta and Ceres

NASA Astrophysics Data System (ADS)

Giardino, M.; Fonte, S.; Politi, R.; Ivanovski, S.; Longobardo, A.; Capria, M. T.; Erard, S.; De Sanctis, M. C.

2018-04-01

A virtual observatory service for DAWN/VIR spectral dataset is presented, based upon the IVOA standards adapted to the planetary field. Advantages of such an approach will be discussed, especially concerning interoperability and availability.

NeXML: rich, extensible, and verifiable representation of comparative data and metadata.

PubMed

Vos, Rutger A; Balhoff, James P; Caravas, Jason A; Holder, Mark T; Lapp, Hilmar; Maddison, Wayne P; Midford, Peter E; Priyam, Anurag; Sukumaran, Jeet; Xia, Xuhua; Stoltzfus, Arlin

2012-07-01

In scientific research, integration and synthesis require a common understanding of where data come from, how much they can be trusted, and what they may be used for. To make such an understanding computer-accessible requires standards for exchanging richly annotated data. The challenges of conveying reusable data are particularly acute in regard to evolutionary comparative analysis, which comprises an ever-expanding list of data types, methods, research aims, and subdisciplines. To facilitate interoperability in evolutionary comparative analysis, we present NeXML, an XML standard (inspired by the current standard, NEXUS) that supports exchange of richly annotated comparative data. NeXML defines syntax for operational taxonomic units, character-state matrices, and phylogenetic trees and networks. Documents can be validated unambiguously. Importantly, any data element can be annotated, to an arbitrary degree of richness, using a system that is both flexible and rigorous. We describe how the use of NeXML by the TreeBASE and Phenoscape projects satisfies user needs that cannot be satisfied with other available file formats. By relying on XML Schema Definition, the design of NeXML facilitates the development and deployment of software for processing, transforming, and querying documents. The adoption of NeXML for practical use is facilitated by the availability of (1) an online manual with code samples and a reference to all defined elements and attributes, (2) programming toolkits in most of the languages used commonly in evolutionary informatics, and (3) input-output support in several widely used software applications. An active, open, community-based development process enables future revision and expansion of NeXML.

NeXML: Rich, Extensible, and Verifiable Representation of Comparative Data and Metadata

PubMed Central

Vos, Rutger A.; Balhoff, James P.; Caravas, Jason A.; Holder, Mark T.; Lapp, Hilmar; Maddison, Wayne P.; Midford, Peter E.; Priyam, Anurag; Sukumaran, Jeet; Xia, Xuhua; Stoltzfus, Arlin

2012-01-01

Abstract In scientific research, integration and synthesis require a common understanding of where data come from, how much they can be trusted, and what they may be used for. To make such an understanding computer-accessible requires standards for exchanging richly annotated data. The challenges of conveying reusable data are particularly acute in regard to evolutionary comparative analysis, which comprises an ever-expanding list of data types, methods, research aims, and subdisciplines. To facilitate interoperability in evolutionary comparative analysis, we present NeXML, an XML standard (inspired by the current standard, NEXUS) that supports exchange of richly annotated comparative data. NeXML defines syntax for operational taxonomic units, character-state matrices, and phylogenetic trees and networks. Documents can be validated unambiguously. Importantly, any data element can be annotated, to an arbitrary degree of richness, using a system that is both flexible and rigorous. We describe how the use of NeXML by the TreeBASE and Phenoscape projects satisfies user needs that cannot be satisfied with other available file formats. By relying on XML Schema Definition, the design of NeXML facilitates the development and deployment of software for processing, transforming, and querying documents. The adoption of NeXML for practical use is facilitated by the availability of (1) an online manual with code samples and a reference to all defined elements and attributes, (2) programming toolkits in most of the languages used commonly in evolutionary informatics, and (3) input–output support in several widely used software applications. An active, open, community-based development process enables future revision and expansion of NeXML. PMID:22357728

Based new WiMax simulation model to investigate Qos with OPNET modeler in sheduling environment

NASA Astrophysics Data System (ADS)

Saini, Sanju; Saini, K. K.

2012-11-01

WiMAX stands for World Interoperability for Microwave Access. It is considered a major part of broadband wireless network having the IEEE 802.16 standard. WiMAX provides innovative, fixed as well as mobile platforms for broadband internet access anywhere anytime with different transmission modes. The results show approximately equal load and throughput while the delay values vary among the different Base Stations Introducing the various type of scheduling algorithm, like FIFO,PQ,WFQ, for comparison of four type of scheduling service, with its own QoS needs and also introducing OPNET modeler support for Worldwide Interoperability for Microwave Access (WiMAX) network. The simulation results indicate the correctness and the effectiveness of this algorithm. This paper presents a WiMAX simulation model designed with OPNET modeler 14 to measure the delay, load and the throughput performance factors.

SDI-based business processes: A territorial analysis web information system in Spain

NASA Astrophysics Data System (ADS)

Béjar, Rubén; Latre, Miguel Á.; Lopez-Pellicer, Francisco J.; Nogueras-Iso, Javier; Zarazaga-Soria, F. J.; Muro-Medrano, Pedro R.

2012-09-01

Spatial Data Infrastructures (SDIs) provide access to geospatial data and operations through interoperable Web services. These data and operations can be chained to set up specialized geospatial business processes, and these processes can give support to different applications. End users can benefit from these applications, while experts can integrate the Web services in their own business processes and developments. This paper presents an SDI-based territorial analysis Web information system for Spain, which gives access to land cover, topography and elevation data, as well as to a number of interoperable geospatial operations by means of a Web Processing Service (WPS). Several examples illustrate how different territorial analysis business processes are supported. The system has been established by the Spanish National SDI (Infraestructura de Datos Espaciales de España, IDEE) both as an experimental platform for geoscientists and geoinformation system developers, and as a mechanism to contribute to the Spanish citizens knowledge about their territory.

CAD Services: an Industry Standard Interface for Mechanical CAD Interoperability

NASA Technical Reports Server (NTRS)

Claus, Russell; Weitzer, Ilan

2002-01-01

Most organizations seek to design and develop new products in increasingly shorter time periods. At the same time, increased performance demands require a team-based multidisciplinary design process that may span several organizations. One approach to meet these demands is to use 'Geometry Centric' design. In this approach, design engineers team their efforts through one united representation of the design that is usually captured in a CAD system. Standards-based interfaces are critical to provide uniform, simple, distributed services that enable the 'Geometry Centric' design approach. This paper describes an industry-wide effort, under the Object Management Group's (OMG) Manufacturing Domain Task Force, to define interfaces that enable the interoperability of CAD, Computer Aided Manufacturing (CAM), and Computer Aided Engineering (CAE) tools. This critical link to enable 'Geometry Centric' design is called: Cad Services V1.0. This paper discusses the features of this standard and proposed application.

Interoperability between phenotype and anatomy ontologies.

PubMed

Hoehndorf, Robert; Oellrich, Anika; Rebholz-Schuhmann, Dietrich

2010-12-15

Phenotypic information is important for the analysis of the molecular mechanisms underlying disease. A formal ontological representation of phenotypic information can help to identify, interpret and infer phenotypic traits based on experimental findings. The methods that are currently used to represent data and information about phenotypes fail to make the semantics of the phenotypic trait explicit and do not interoperate with ontologies of anatomy and other domains. Therefore, valuable resources for the analysis of phenotype studies remain unconnected and inaccessible to automated analysis and reasoning. We provide a framework to formalize phenotypic descriptions and make their semantics explicit. Based on this formalization, we provide the means to integrate phenotypic descriptions with ontologies of other domains, in particular anatomy and physiology. We demonstrate how our framework leads to the capability to represent disease phenotypes, perform powerful queries that were not possible before and infer additional knowledge. http://bioonto.de/pmwiki.php/Main/PheneOntology.

Telescience workstation

NASA Technical Reports Server (NTRS)

Brown, Robert L.; Doyle, Dee; Haines, Richard F.; Slocum, Michael

1989-01-01

As part of the Telescience Testbed Pilot Program, the Universities Space Research Association/ Research Institute for Advanced Computer Science (USRA/RIACS) proposed to support remote communication by providing a network of human/machine interfaces, computer resources, and experimental equipment which allows: remote science, collaboration, technical exchange, and multimedia communication. The telescience workstation is intended to provide a local computing environment for telescience. The purpose of the program are as follows: (1) to provide a suitable environment to integrate existing and new software for a telescience workstation; (2) to provide a suitable environment to develop new software in support of telescience activities; (3) to provide an interoperable environment so that a wide variety of workstations may be used in the telescience program; (4) to provide a supportive infrastructure and a common software base; and (5) to advance, apply, and evaluate the telescience technolgy base. A prototype telescience computing environment designed to bring practicing scientists in domains other than their computer science into a modern style of doing their computing was created and deployed. This environment, the Telescience Windowing Environment, Phase 1 (TeleWEn-1), met some, but not all of the goals stated above. The TeleWEn-1 provided a window-based workstation environment and a set of tools for text editing, document preparation, electronic mail, multimedia mail, raster manipulation, and system management.

Development of a Web-Based Visualization Platform for Climate Research Using Google Earth

NASA Technical Reports Server (NTRS)

Sun, Xiaojuan; Shen, Suhung; Leptoukh, Gregory G.; Wang, Panxing; Di, Liping; Lu, Mingyue

2011-01-01

Recently, it has become easier to access climate data from satellites, ground measurements, and models from various data centers, However, searching. accessing, and prc(essing heterogeneous data from different sources are very tim -consuming tasks. There is lack of a comprehensive visual platform to acquire distributed and heterogeneous scientific data and to render processed images from a single accessing point for climate studies. This paper. documents the design and implementation of a Web-based visual, interoperable, and scalable platform that is able to access climatological fields from models, satellites, and ground stations from a number of data sources using Google Earth (GE) as a common graphical interface. The development is based on the TCP/IP protocol and various data sharing open sources, such as OPeNDAP, GDS, Web Processing Service (WPS), and Web Mapping Service (WMS). The visualization capability of integrating various measurements into cE extends dramatically the awareness and visibility of scientific results. Using embedded geographic information in the GE, the designed system improves our understanding of the relationships of different elements in a four dimensional domain. The system enables easy and convenient synergistic research on a virtual platform for professionals and the general public, gr$tly advancing global data sharing and scientific research collaboration.

AnnoSys—implementation of a generic annotation system for schema-based data using the example of biodiversity collection data

PubMed Central

Kusber, W.-H.; Tschöpe, O.; Güntsch, A.; Berendsohn, W. G.

2017-01-01

Abstract Biological research collections holding billions of specimens world-wide provide the most important baseline information for systematic biodiversity research. Increasingly, specimen data records become available in virtual herbaria and data portals. The traditional (physical) annotation procedure fails here, so that an important pathway of research documentation and data quality control is broken. In order to create an online annotation system, we analysed, modeled and adapted traditional specimen annotation workflows. The AnnoSys system accesses collection data from either conventional web resources or the Biological Collection Access Service (BioCASe) and accepts XML-based data standards like ABCD or DarwinCore. It comprises a searchable annotation data repository, a user interface, and a subscription based message system. We describe the main components of AnnoSys and its current and planned interoperability with biodiversity data portals and networks. Details are given on the underlying architectural model, which implements the W3C OpenAnnotation model and allows the adaptation of AnnoSys to different problem domains. Advantages and disadvantages of different digital annotation and feedback approaches are discussed. For the biodiversity domain, AnnoSys proposes best practice procedures for digital annotations of complex records. Database URL: https://annosys.bgbm.fu-berlin.de/AnnoSys/AnnoSys PMID:28365735

A Principled Approach to the Specification of System Architectures for Space Missions

NASA Technical Reports Server (NTRS)

McKelvin, Mark L. Jr.; Castillo, Robert; Bonanne, Kevin; Bonnici, Michael; Cox, Brian; Gibson, Corrina; Leon, Juan P.; Gomez-Mustafa, Jose; Jimenez, Alejandro; Madni, Azad

2015-01-01

Modern space systems are increasing in complexity and scale at an unprecedented pace. Consequently, innovative methods, processes, and tools are needed to cope with the increasing complexity of architecting these systems. A key systems challenge in practice is the ability to scale processes, methods, and tools used to architect complex space systems. Traditionally, the process for specifying space system architectures has largely relied on capturing the system architecture in informal descriptions that are often embedded within loosely coupled design documents and domain expertise. Such informal descriptions often lead to misunderstandings between design teams, ambiguous specifications, difficulty in maintaining consistency as the architecture evolves throughout the system development life cycle, and costly design iterations. Therefore, traditional methods are becoming increasingly inefficient to cope with ever-increasing system complexity. We apply the principles of component-based design and platform-based design to the development of the system architecture for a practical space system to demonstrate feasibility of our approach using SysML. Our results show that we are able to apply a systematic design method to manage system complexity, thus enabling effective data management, semantic coherence and traceability across different levels of abstraction in the design chain. Just as important, our approach enables interoperability among heterogeneous tools in a concurrent engineering model based design environment.

Design and management of public health outreach using interoperable mobile multimedia: an analysis of a national winter weather preparedness campaign.

PubMed

Bandera, Cesar

2016-05-25

The Office of Public Health Preparedness and Response (OPHPR) in the Centers for Disease Control and Prevention conducts outreach for public preparedness for natural and manmade incidents. In 2011, OPHPR conducted a nationwide mobile public health (m-Health) campaign that pushed brief videos on preparing for severe winter weather onto cell phones, with the objective of evaluating the interoperability of multimedia m-Health outreach with diverse cell phones (including handsets without Internet capability), carriers, and user preferences. Existing OPHPR outreach material on winter weather preparedness was converted into mobile-ready multimedia using mobile marketing best practices to improve audiovisual quality and relevance. Middleware complying with opt-in requirements was developed to push nine bi-weekly multimedia broadcasts onto subscribers' cell phones, and OPHPR promoted the campaign on its web site and to subscribers on its govdelivery.com notification platform. Multimedia, text, and voice messaging activity to/from the middleware was logged and analyzed. Adapting existing media into mobile video was straightforward using open source and commercial software, including web pages, PDF documents, and public service announcements. The middleware successfully delivered all outreach videos to all participants (a total of 504 videos) regardless of the participant's device. 54 % of videos were viewed on cell phones, 32 % on computers, and 14 % were retrieved by search engine web crawlers. 21 % of participating cell phones did not have Internet access, yet still received and displayed all videos. The time from media push to media viewing on cell phones was half that of push to viewing on computers. Video delivered through multimedia messaging can be as interoperable as text messages, while providing much richer information. This may be the only multimedia mechanism available to outreach campaigns targeting vulnerable populations impacted by the digital divide. Anti-spam laws preserve the integrity of mobile messaging, but complicate campaign promotion. Person-to-person messages may boost enrollment.

Electronic Health Records: VAs Efforts Raise Concerns about Interoperability Goals and Measures, Duplication with DOD, and Future Plans

DTIC Science & Technology

2016-07-13

ELECTRONIC HEALTH RECORDS VA’s Efforts Raise Concerns about Interoperability Goals and Measures, Duplication with DOD...Agencies, Committee on Appropriations, U.S. Senate July 13, 2016 ELECTRONIC HEALTH RECORDS VA’s Efforts Raise Concerns about Interoperability Goals...initiatives with the Department of Defense (DOD) that were intended to advance the ability of the two departments to share electronic health records , the

Enabling Medical Device Interoperability for the Integrated Clinical Environment

DTIC Science & Technology

2016-12-01

else who is eager to work together to mature the healthcare technology ecosystem to enable the next generation of safe and intelligent medical device...Award Number: W81XWH-12-C-0154 TITLE: “Enabling Medical Device Interoperability for the Integrated Clinical Environment ” PRINCIPAL INVESTIGATOR...SUBTITLE 5a. CONTRACT NUMBER W81XWH-12-C-0154 “Enabling Medical Device Interoperability for the Integrated Clinical Environment ” 5b. GRANT NUMBER 5c

An Air Operations Division Live, Virtual, and Constructive (LVC) Corporate Interoperability Standards Development Strategy

DTIC Science & Technology

2011-07-01

Orlando, Florida, September 2009, 09F- SIW -090. [HLA (2000) - 1] - Modeling and Simulation Standard - High Level Architecture (HLA) – Framework and...Simulation Interoperability Workshop, Orlando, FL, USA, September 2009, 09F- SIW -023. [MaK] - www.mak.com [MIL-STD-3011] - MIL-STD-3011...Spring Simulation Interoperability Workshop, Norfolk, VA, USA, March 2007, 07S- SIW -072. [Ross] - Ross, P. and Clark, P. (2005), “Recommended

Interoperable Open-Source Sensor-Net Frameworks with Sensor-Package Workbench Capabilities: Motivation, Survey of Resources, and Exploratory Results

DTIC Science & Technology

2010-06-01

Military Scenario Definition Language (MSDL) for Nontraditional Warfare Scenarios," Paper 09S- SIW -001, Proceedings of the Spring Simulation...Update to the M&S Community," Paper 09S- SIW -002, Proceedings of the Spring Simulation Interoperability Workshop, Simulation Interoperability...Multiple Simulations: An Application of the Military Scenario Definition Language (MSDL)," Paper 09S- SIW -003, Proc. of the Spring Simulation

Planetary Sciences Interoperability at VO Paris Data Centre

NASA Astrophysics Data System (ADS)

Le Sidaner, P.; Aboudarham, J.; Birlan, M.; Briot, D.; Bonnin, X.; Cecconi, B.; Chauvin, C.; Erard, S.; Henry, F.; Lamy, L.; Mancini, M.; Normand, J.; Popescu, F.; Roques, F.; Savalle, R.; Schneider, J.; Shih, A.; Thuillot, W.; Vinatier, S.

2015-10-01

The Astronomy community has been developing interoperability since more than 10 years, by standardizing data access, data formats, and metadata. This international action is led by the International Virtual Observatory Alliance (IVOA). Observatoire de Paris is an active participant in this project. All actions on interoperability, data and service provision are centralized in and managed by VOParis Data Centre (VOPDC). VOPDC is a coordinated project from all scientific departments of Observatoire de Paris..

UAS Integration into the NAS: Detect and Avoid Display Evaluations in Support of SC-228 MOPS Development

NASA Technical Reports Server (NTRS)

Fern, Lisa; Rorie, Conrad; Shively, Jay

2016-01-01

At the May 2015 SC-228 meeting, requirements for TCAS II interoperability became elevated in priority. A TCAS interoperability work group was formed to identify and address key issuesquestions. The TCAS work group came up with an initial list of questions and a plan to address those questions. As part of that plan, NASA proposed to run a mini HITL to address display, alerting and guidance issues. A TCAS Interoperability Workshop was held to determine potential displayalertingguidance issues that could be explored in future NASA mini HITLS. Consensus on main functionality of DAA guidance when TCAS II RA occurs. Prioritized list of independent variables for experimental design. Set of use cases to stress TCAS Interoperability.

[Challenges of Digital Medicine].

PubMed

Blaser, Jürg

2018-06-01

Challenges of Digital Medicine Abstract. Digitization is increasingly covering more and more sectors, including medicine. To ensure medical operation 365 × 24 hours, progressively more human and financial resources are necessary. The transformation of patient histories from paper into electronic patient records focused initially on documentation. Today, hospital information systems are increasingly used as a platform for the communication of all professionals involved in the patient process - in Switzerland, however, so far without providing patients direct access to their data. Digititizing processes intend to increase efficiency, but also to enhance clinical and administrative decision support and quality assurance. The introduction of the electronic patient record in Switzerland in 2020 is expected to provide cross-company, more complete documentation of patient care. Multimorbid patients, often treated in different institutions and by different specialists, should benefit from this in particular. Advances in artificial intelligence offer new opportunities in medicine. Challenges include ensuring reliable data protection, and better interoperability of the systems involved. Semantically structured, machine-readable data exchange is a necessity for both networked services and internationally competitive research.

Telemonitoring of patients with Parkinson's disease using inertia sensors.

PubMed

Piro, N E; Baumann, L; Tengler, M; Piro, L; Blechschmidt-Trapp, R

2014-01-01

Medical treatment in patients suffering from Parkinson's disease is very difficult as dose-finding is mainly based on selective and subjective impressions by the physician. To allow for the objective evaluation of patients' symptoms required for optimal dosefinding, a telemonitoring system tracks the motion of patients in their surroundings. The system focuses on providing interoperability and usability in order to ensure high acceptance. Patients wear inertia sensors and perform standardized motor tasks. Data are recorded, processed and then presented to the physician in a 3D animated form. In addition, the same data is rated based on the UPDRS score. Interoperability is realized by developing the system in compliance with the recommendations of the Continua Health Alliance. Detailed requirements analysis and continuous collaboration with respective user groups help to achieve high usability. A sensor platform was developed that is capable of measuring acceleration and angular rate of motions as well as the absolute orientation of the device itself through an included compass sensor. The system architecture was designed and required infrastructure, and essential parts of the communication between the system components were implemented following Continua guidelines. Moreover, preliminary data analysis based on three-dimensional acceleration and angular rate data could be established. A prototype system for the telemonitoring of Parkinson's disease patients was successfully developed. The developed sensor platform fully satisfies the needs of monitoring patients of Parkinson's disease and is comparable to other sensor platforms, although these sensor platforms have yet to be tested rigorously against each other. Suitable approaches to provide interoperability and usability were identified and realized and remain to be tested in the field.

Designing a Distributed Space Systems Simulation in Accordance with the Simulation Interoperability Standards Organization (SISO)

NASA Technical Reports Server (NTRS)

Cowen, Benjamin

2011-01-01

Simulations are essential for engineering design. These virtual realities provide characteristic data to scientists and engineers in order to understand the details and complications of the desired mission. A standard development simulation package known as Trick is used in developing a source code to model a component (federate in HLA terms). The runtime executive is integrated into an HLA based distributed simulation. TrickHLA is used to extend a Trick simulation for a federation execution, develop a source code for communication between federates, as well as foster data input and output. The project incorporates international cooperation along with team collaboration. Interactions among federates occur throughout the simulation, thereby relying on simulation interoperability. Communication through the semester went on between participants to figure out how to create this data exchange. The NASA intern team is designing a Lunar Rover federate and a Lunar Shuttle federate. The Lunar Rover federate supports transportation across the lunar surface and is essential for fostering interactions with other federates on the lunar surface (Lunar Shuttle, Lunar Base Supply Depot and Mobile ISRU Plant) as well as transporting materials to the desired locations. The Lunar Shuttle federate transports materials to and from lunar orbit. Materials that it takes to the supply depot include fuel and cargo necessary to continue moon-base operations. This project analyzes modeling and simulation technologies as well as simulation interoperability. Each team from participating universities will work on and engineer their own federate(s) to participate in the SISO Spring 2011 Workshop SIW Smackdown in Boston, Massachusetts. This paper will focus on the Lunar Rover federate.

Creating personalised clinical pathways by semantic interoperability with electronic health records.

PubMed

Wang, Hua-Qiong; Li, Jing-Song; Zhang, Yi-Fan; Suzuki, Muneou; Araki, Kenji

2013-06-01

There is a growing realisation that clinical pathways (CPs) are vital for improving the treatment quality of healthcare organisations. However, treatment personalisation is one of the main challenges when implementing CPs, and the inadequate dynamic adaptability restricts the practicality of CPs. The purpose of this study is to improve the practicality of CPs using semantic interoperability between knowledge-based CPs and semantic electronic health records (EHRs). Simple protocol and resource description framework query language is used to gather patient information from semantic EHRs. The gathered patient information is entered into the CP ontology represented by web ontology language. Then, after reasoning over rules described by semantic web rule language in the Jena semantic framework, we adjust the standardised CPs to meet different patients' practical needs. A CP for acute appendicitis is used as an example to illustrate how to achieve CP customisation based on the semantic interoperability between knowledge-based CPs and semantic EHRs. A personalised care plan is generated by comprehensively analysing the patient's personal allergy history and past medical history, which are stored in semantic EHRs. Additionally, by monitoring the patient's clinical information, an exception is recorded and handled during CP execution. According to execution results of the actual example, the solutions we present are shown to be technically feasible. This study contributes towards improving the clinical personalised practicality of standardised CPs. In addition, this study establishes the foundation for future work on the research and development of an independent CP system. Copyright © 2013 Elsevier B.V. All rights reserved.

Electronic health records and cardiac implantable electronic devices: new paradigms and efficiencies.

PubMed

Slotwiner, David J

2016-10-01

The anticipated advantages of electronic health records (EHRs)-improved efficiency and the ability to share information across the healthcare enterprise-have so far failed to materialize. There is growing recognition that interoperability holds the key to unlocking the greatest value of EHRs. Health information technology (HIT) systems including EHRs must be able to share data and be able to interpret the shared data. This requires a controlled vocabulary with explicit definitions (data elements) as well as protocols to communicate the context in which each data element is being used (syntactic structure). Cardiac implantable electronic devices (CIEDs) provide a clear example of the challenges faced by clinicians when data is not interoperable. The proprietary data formats created by each CIED manufacturer, as well as the multiple sources of data generated by CIEDs (hospital, office, remote monitoring, acute care setting), make it challenging to aggregate even a single patient's data into an EHR. The Heart Rhythm Society and CIED manufacturers have collaborated to develop and implement international standard-based specifications for interoperability that provide an end-to-end solution, enabling structured data to be communicated from CIED to a report generation system, EHR, research database, referring physician, registry, patient portal, and beyond. EHR and other health information technology vendors have been slow to implement these tools, in large part, because there have been no financial incentives for them to do so. It is incumbent upon us, as clinicians, to insist that the tools of interoperability be a prerequisite for the purchase of any and all health information technology systems.

Establishing Semantic Interoperability, Under Denied, Disconnected, Intermittant, and Limited Telecommunications Conditions

DTIC Science & Technology

2014-06-01

functionalities and capabilities of DDS. We present a middleware design based on the DDS specifications as developed by the Object Management Group . The...functionalities and capabilities of DDS. We present a middleware design based on the DDS specifications as developed by the Object Management Group ...32 c. History .....................................................................................33 d

Data Modeling Challenges of Advanced Interoperability.

PubMed

Blobel, Bernd; Oemig, Frank; Ruotsalainen, Pekka

2018-01-01

Progressive health paradigms, involving many different disciplines and combining multiple policy domains, requires advanced interoperability solutions. This results in special challenges for modeling health systems. The paper discusses classification systems for data models and enterprise business architectures and compares them with the ISO Reference Architecture. On that basis, existing definitions, specifications and standards of data models for interoperability are evaluated and their limitations are discussed. Amendments to correctly use those models and to better meet the aforementioned challenges are offered.

Towards an Approach of Semantic Access Control for Cloud Computing

NASA Astrophysics Data System (ADS)

Hu, Luokai; Ying, Shi; Jia, Xiangyang; Zhao, Kai

With the development of cloud computing, the mutual understandability among distributed Access Control Policies (ACPs) has become an important issue in the security field of cloud computing. Semantic Web technology provides the solution to semantic interoperability of heterogeneous applications. In this paper, we analysis existing access control methods and present a new Semantic Access Control Policy Language (SACPL) for describing ACPs in cloud computing environment. Access Control Oriented Ontology System (ACOOS) is designed as the semantic basis of SACPL. Ontology-based SACPL language can effectively solve the interoperability issue of distributed ACPs. This study enriches the research that the semantic web technology is applied in the field of security, and provides a new way of thinking of access control in cloud computing.

The charging security study of electric vehicle charging spot based on automatic testing platform

NASA Astrophysics Data System (ADS)

Li, Yulan; Yang, Zhangli; Zhu, Bin; Ran, Shengyi

2018-03-01

With the increasing of charging spots, the testing of charging security and interoperability becomes more and more urgent and important. In this paper, an interface simulator for ac charging test is designed, the automatic testing platform for electric vehicle charging spots is set up and used to test and analyze the abnormal state during the charging process. On the platform, the charging security and interoperability of ac charging spots and IC-CPD can be checked efficiently, the test report can be generated automatically with No artificial reading error. From the test results, the main reason why the charging spot is not qualified is that the power supply cannot be cut off in the prescribed time when the charging anomaly occurs.

eHealth integration and interoperability issues: towards a solution through enterprise architecture.

PubMed

Adenuga, Olugbenga A; Kekwaletswe, Ray M; Coleman, Alfred

2015-01-01

Investments in healthcare information and communication technology (ICT) and health information systems (HIS) continue to increase. This is creating immense pressure on healthcare ICT and HIS to deliver and show significance in such investments in technology. It is discovered in this study that integration and interoperability contribute largely to this failure in ICT and HIS investment in healthcare, thus resulting in the need towards healthcare architecture for eHealth. This study proposes an eHealth architectural model that accommodates requirement based on healthcare need, system, implementer, and hardware requirements. The model is adaptable and examines the developer's and user's views that systems hold high hopes for their potential to change traditional organizational design, intelligence, and decision-making.

A Framework for Seamless Interoperation of Heterogeneous Distributed Software Components

DTIC Science & Technology

2005-05-01

interoperability, b) distributed resource discovery, and c) validation of quality requirements. Principles and prototypical systems were created to demonstrate the successful completion of the research.

Development of high performance scientific components for interoperability of computing packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gulabani, Teena Pratap

2008-01-01

Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achievedmore » by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.« less

The solution of target assignment problem in command and control decision-making behaviour simulation

NASA Astrophysics Data System (ADS)

Li, Ni; Huai, Wenqing; Wang, Shaodan

2017-08-01

C2 (command and control) has been understood to be a critical military component to meet an increasing demand for rapid information gathering and real-time decision-making in a dynamically changing battlefield environment. In this article, to improve a C2 behaviour model's reusability and interoperability, a behaviour modelling framework was proposed to specify a C2 model's internal modules and a set of interoperability interfaces based on the C-BML (coalition battle management language). WTA (weapon target assignment) is a typical C2 autonomous decision-making behaviour modelling problem. Different from most WTA problem descriptions, here sensors were considered to be available resources of detection and the relationship constraints between weapons and sensors were also taken into account, which brought it much closer to actual application. A modified differential evolution (MDE) algorithm was developed to solve this high-dimension optimisation problem and obtained an optimal assignment plan with high efficiency. In case study, we built a simulation system to validate the proposed C2 modelling framework and interoperability interface specification. Also, a new optimisation solution was used to solve the WTA problem efficiently and successfully.

Integrating manufacturing softwares for intelligent planning execution: a CIIMPLEX perspective

NASA Astrophysics Data System (ADS)

Chu, Bei Tseng B.; Tolone, William J.; Wilhelm, Robert G.; Hegedus, M.; Fesko, J.; Finin, T.; Peng, Yun; Jones, Chris H.; Long, Junshen; Matthews, Mike; Mayfield, J.; Shimp, J.; Su, S.

1997-01-01

Recent developments have made it possible to interoperate complex business applications at much lower costs. Application interoperation, along with business process re- engineering can result in significant savings by eliminating work created by disconnected business processes due to isolated business applications. However, we believe much greater productivity benefits can be achieved by facilitating timely decision-making, utilizing information from multiple enterprise perspectives. The CIIMPLEX enterprise integration architecture is designed to enable such productivity gains by helping people to carry out integrated enterprise scenarios. An enterprise scenario is triggered typically by some external event. The goal of an enterprise scenario is to make the right decisions considering the full context of the problem. Enterprise scenarios are difficult for people to carry out because of the interdependencies among various actions. One can easily be overwhelmed by the large amount of information. We propose the use of software agents to help gathering relevant information and present them in the appropriate context of an enterprise scenario. The CIIMPLEX enterprise integration architecture is based on the FAIME methodology for application interoperation and plug-and-play. It also explores the use of software agents in application plug-and- play.

Biometric identification: a holistic perspective

NASA Astrophysics Data System (ADS)

Nadel, Lawrence D.

2007-04-01

Significant advances continue to be made in biometric technology. However, the global war on terrorism and our increasingly electronic society have created the societal need for large-scale, interoperable biometric capabilities that challenge the capabilities of current off-the-shelf technology. At the same time, there are concerns that large-scale implementation of biometrics will infringe our civil liberties and offer increased opportunities for identity theft. This paper looks beyond the basic science and engineering of biometric sensors and fundamental matching algorithms and offers approaches for achieving greater performance and acceptability of applications enabled with currently available biometric technologies. The discussion focuses on three primary biometric system aspects: performance and scalability, interoperability, and cost benefit. Significant improvements in system performance and scalability can be achieved through careful consideration of the following elements: biometric data quality, human factors, operational environment, workflow, multibiometric fusion, and integrated performance modeling. Application interoperability hinges upon some of the factors noted above as well as adherence to interface, data, and performance standards. However, there are times when the price of conforming to such standards can be decreased local system performance. The development of biometric performance-based cost benefit models can help determine realistic requirements and acceptable designs.

Interoperability of GADU in using heterogeneous Grid resources for bioinformatics applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sulakhe, D.; Rodriguez, A.; Wilde, M.

2008-03-01

Bioinformatics tools used for efficient and computationally intensive analysis of genetic sequences require large-scale computational resources to accommodate the growing data. Grid computational resources such as the Open Science Grid and TeraGrid have proved useful for scientific discovery. The genome analysis and database update system (GADU) is a high-throughput computational system developed to automate the steps involved in accessing the Grid resources for running bioinformatics applications. This paper describes the requirements for building an automated scalable system such as GADU that can run jobs on different Grids. The paper describes the resource-independent configuration of GADU using the Pegasus-based virtual datamore » system that makes high-throughput computational tools interoperable on heterogeneous Grid resources. The paper also highlights the features implemented to make GADU a gateway to computationally intensive bioinformatics applications on the Grid. The paper will not go into the details of problems involved or the lessons learned in using individual Grid resources as it has already been published in our paper on genome analysis research environment (GNARE) and will focus primarily on the architecture that makes GADU resource independent and interoperable across heterogeneous Grid resources.« less

A SOA-Based Platform to Support Clinical Data Sharing

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. © 2017 R. Gazzarata et al.

ETICS: the international software engineering service for the grid

NASA Astrophysics Data System (ADS)

Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

2008-07-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

A SOA-Based Platform to Support Clinical Data Sharing

PubMed Central

Gazzarata, R.; Giannini, B.

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. PMID:29065576

The BACnet Campus Challenge - Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masica, Ken; Tom, Steve

Here, the BACnet protocol was designed to achieve interoperability among building automation vendors and evolve over time to include new functionality as well as support new communication technologies such as the Ethernet and IP protocols as they became prevalent and economical in the market place. For large multi-building, multi-vendor campus environments, standardizing on the BACnet protocol as an implementation strategy can be a key component in meeting the challenge of an interoperable, flexible, and scalable building automation system. The interoperability of BACnet is especially important when large campuses with legacy equipment have DDC upgrades to facilities performed over different timemore » frames and use different contractors that install equipment from different vendors under the guidance of different campus HVAC project managers. In these circumstances, BACnet can serve as a common foundation for interoperability when potential variability exists in approaches to the design-build process by numerous parties over time. Likewise, BACnet support for a range of networking protocols and technologies can be a key strategy for achieving flexible and scalable automation systems as campuses and enterprises expand networking infrastructures using standard interoperable protocols like IP and Ethernet.« less

Study and validation of tools interoperability in JPSEC

NASA Astrophysics Data System (ADS)

Conan, V.; Sadourny, Y.; Jean-Marie, K.; Chan, C.; Wee, S.; Apostolopoulos, J.

2005-08-01

Digital imagery is important in many applications today, and the security of digital imagery is important today and is likely to gain in importance in the near future. The emerging international standard ISO/IEC JPEG-2000 Security (JPSEC) is designed to provide security for digital imagery, and in particular digital imagery coded with the JPEG-2000 image coding standard. One of the primary goals of a standard is to ensure interoperability between creators and consumers produced by different manufacturers. The JPSEC standard, similar to the popular JPEG and MPEG family of standards, specifies only the bitstream syntax and the receiver's processing, and not how the bitstream is created or the details of how it is consumed. This paper examines the interoperability for the JPSEC standard, and presents an example JPSEC consumption process which can provide insights in the design of JPSEC consumers. Initial interoperability tests between different groups with independently created implementations of JPSEC creators and consumers have been successful in providing the JPSEC security services of confidentiality (via encryption) and authentication (via message authentication codes, or MACs). Further interoperability work is on-going.

Identity Management Systems in Healthcare: The Issue of Patient Identifiers

NASA Astrophysics Data System (ADS)

Soenens, Els

According to a recent recommendation of the European Commission, now is the time for Europe to enhance interoperability in eHealth. Although interoperability of patient identifiers seems promising for matters of patient mobility, patient empowerment and effective access to care, we see that today there is indeed a considerable lack of interoperability in the field of patient identification. Looking from a socio-technical rather than a merely technical point of view, one can understand the fact that the development and implementation of an identity management system in a specific healthcare context is influenced by particular social practices, affected by socio-economical history and the political climate and regulated by specific data protection legislations. Consequently, the process of making patient identification in Europe more interoperable is a development beyond semantic and syntactic levels. In this paper, we gives some examples of today’s patient identifier systems in Europe, discuss the issue of interoperability of (unique) patient identifiers from a socio-technical point of view and try not to ignore the ‘privacy side’ of the story.

The BACnet Campus Challenge - Part 1

DOE PAGES

Masica, Ken; Tom, Steve

2015-12-01

Here, the BACnet protocol was designed to achieve interoperability among building automation vendors and evolve over time to include new functionality as well as support new communication technologies such as the Ethernet and IP protocols as they became prevalent and economical in the market place. For large multi-building, multi-vendor campus environments, standardizing on the BACnet protocol as an implementation strategy can be a key component in meeting the challenge of an interoperable, flexible, and scalable building automation system. The interoperability of BACnet is especially important when large campuses with legacy equipment have DDC upgrades to facilities performed over different timemore » frames and use different contractors that install equipment from different vendors under the guidance of different campus HVAC project managers. In these circumstances, BACnet can serve as a common foundation for interoperability when potential variability exists in approaches to the design-build process by numerous parties over time. Likewise, BACnet support for a range of networking protocols and technologies can be a key strategy for achieving flexible and scalable automation systems as campuses and enterprises expand networking infrastructures using standard interoperable protocols like IP and Ethernet.« less

Key pillars of data interoperability in Earth Sciences - INSPIRE and beyond

NASA Astrophysics Data System (ADS)

Tomas, Robert; Lutz, Michael

2013-04-01

The well-known heterogeneity and fragmentation of data models, formats and controlled vocabularies of environmental data limit potential data users from utilising the wealth of environmental information available today across Europe. The main aim of INSPIRE1 is to improve this situation and give users possibility to access, use and correctly interpret environmental data. Over the past years number of INSPIRE technical guidelines (TG) and implementing rules (IR) for interoperability have been developed, involving hundreds of domain experts from across Europe. The data interoperability specifications, which have been developed for all 34 INSPIRE spatial data themes2, are the central component of the TG and IR. Several of these themes are related to the earth sciences, e.g. geology (including hydrogeology, geophysics and geomorphology), mineral and energy resources, soil science, natural hazards, meteorology, oceanography, hydrology and land cover. The following main pillars for data interoperability and harmonisation have been identified during the development of the specifications: Conceptual data models describe the spatial objects and their properties and relationships for the different spatial data themes. To achieve cross-domain harmonization, the data models for all themes are based on a common modelling framework (the INSPIRE Generic Conceptual Model3) and managed in a common UML repository. Harmonised vocabularies (or code lists) are to be used in data exchange in order to overcome interoperability issues caused by heterogeneous free-text and/or multi-lingual content. Since a mapping to a harmonized vocabulary could be difficult, the INSPIRE data models typically allow the provision of more specific terms from local vocabularies in addition to the harmonized terms - utilizing either the extensibility options or additional terminological attributes. Encoding. Currently, specific XML profiles of the Geography Markup Language (GML) are promoted as the standard encoding. However, since the conceptual models are independent of concrete encodings, it is also possible to derive other encodings (e.g. based on RDF). Registers provide unique and persistent identifiers for a number of different types of information items (e.g. terms from a controlled vocabulary or units of measure) and allow their consistent management and versioning. By using these identifiers in data, references to specific information items can be made unique and unambiguous. It is important that these interoperability solutions are not developed in isolation - for Europe only. This has been identified from the beginning, and therefore, international standards have been taken into account and been widely referred to in INSPIRE. This mutual cooperation with international standardisation activities needs to be maintained or even extended. For example, where INSPIRE has gone beyond existing standards, the INSPIRE interoperability solutions should be introduced to the international standardisation initiatives. However, in some cases, it is difficult to choose the appropriate international organization or standardisation body (e.g. where there are several organizations overlapping in scope) or to achieve international agreements that accept European specifics. Furthermore, the development of the INSPIRE specifications (to be legally adopted in 2013) is only a beginning of the effort to make environmental data interoperable. Their actual implementation by data providers across Europe, as well as the rapid development in the earth sciences (e.g. from new simulation models, scientific advances, etc.) and ICT technology will lead to requests for changes. It is therefore crucial to ensure the long-term sustainable maintenance and further development of the proposed infrastructure. This task cannot be achieved by the INSPIRE coordination team of the European Commission alone. It is therefore crucial to closely involve relevant (where possible, umbrella) organisations in the earth sciences, who can provide the necessary domain knowledge and expert networks.