Science.gov

Sample records for double-layered low-temperature cylindrical

  1. Low temperature double-layer capacitors

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J. (Inventor); Smart, Marshall C. (Inventor); West, William C. (Inventor)

    2011-01-01

    Double-layer capacitors capable of operating at extremely low temperatures (e.g., as low as -75.degree. C.) are disclosed. Electrolyte solutions combining a base solvent (e.g., acetonitrile) and a cosolvent are employed to lower the melting point of the base electrolyte. Example cosolvents include methyl formate, ethyl acetate, methyl acetate, propionitrile, butyronitrile, and 1,3-dioxolane. An optimized concentration (e.g., 0.10 M to 0.75 M) of salt, such as tetraethylammonium tetrafluoroborate, is dissolved into the electrolyte solution. In some cases (e.g., 1,3-dioxolane cosolvent) additives, such as 2% by volume triethylamine, may be included in the solvent mixture to prevent polymerization of the solution. Conventional device form factors and structural elements (e.g., porous carbon electrodes and a polyethylene separator) may be employed.

  2. Low Temperature Double-layer Capacitors with Improved Energy Density: An Overview of Recent Development Efforts

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J.; West, William C.; Smart, Marshall C.; Korenblit, Yair; Kajdos, Adam; Kvit, Alexander; Jagiello, Jacek; Yushin, Gleb

    2012-01-01

    Electrochemical double-layer capacitors are finding increased use in a wide range of energy storage applications, particularly where high pulse power capabilities are required. Double-layer capacitors store charge at a liquid/solid interface, making them ideal for low temperature power applications, due to the facile kinetic processes associated with the rearrangement of the electrochemical double-layer at these temperatures. Potential low temperature applications include hybrid and electric vehicles, operations in polar regions, high altitude aircraft and aerospace avionics, and distributed environmental and structural health monitoring. State-of-the-art capacitors can typically operate to -40 C, with a subsequent degradation in power performance below room temperature. However, recent efforts focused on advanced electrolyte and electrode systems can enable operation to temperatures as low as -70 C, with capacities similar to room temperature values accompanied by reasonably low equivalent series resistances. This presentation will provide an overview of recent development efforts to extend and improve the wide temperature performance of these devices.

  3. Substituted Quaternary Ammonium Salts Improve Low-Temperature Performance of Double-Layer Capacitors

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J.; Smart, Marshall C.; West, William C.

    2011-01-01

    Double-layer capacitors are unique energy storage devices, capable of supporting large current pulses as well as a very high number of charging and discharging cycles. The performance of doublelayer capacitors is highly dependent on the nature of the electrolyte system used. Many applications, including for electric and fuel cell vehicles, back-up diesel generators, wind generator pitch control back-up power systems, environmental and structural distributed sensors, and spacecraft avionics, can potentially benefit from the use of double-layer capacitors with lower equivalent series resistances (ESRs) over wider temperature limits. Higher ESRs result in decreased power output, which is a particular problem at lower temperatures. Commercially available cells are typically rated for operation down to only 40 C. Previous briefs [for example, Low Temperature Supercapacitors (NPO-44386), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), p. 32, and Supercapacitor Electrolyte Solvents With Liquid Range Below 80 C (NPO-44855), NASA Tech Briefs, Vol. 34, No. 1 (January 2010), p. 44] discussed the use of electrolytes that employed low-melting-point co-solvents to depress the freezing point of traditional acetonitrile-based electrolytes. Using these modified electrolyte formulations can extend the low-temperature operational limit of double-layer capacitors beyond that of commercially available cells. This previous work has shown that although the measured capacitance is relatively insensitive to temperature, the ESR can rise rapidly at low temperatures, due to decreased electrolyte conductance within the pores of the high surface- area carbon electrodes. Most of these advanced electrolyte systems featured tetraethylammonium tetrafluoroborate (TEATFB) as the salt. More recent work at JPL indicates the use of the asymmetric quaternary ammonium salt triethylmethylammonium tetrafluoroborate (TEMATFB) or spiro-(l,l')-bipyrrolidium tetrafluoroborate (SBPBF4) in a 1:1 by volume solvent

  4. Low Temperature Double-Layer Capacitors Using Asymmetric and Spiro-Type Quaternary Ammonium Salts

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J. (Inventor); Smart, Marshall C. (Inventor); West, William C. (Inventor)

    2014-01-01

    Double-layer capacitors capable of operating at extremely low temperatures (e.g., as low as -80.degree. C.) are disclosed. Electrolyte solutions combining a base solvent (e.g., acetonitrile) and a cosolvent are employed to lower the melting point of the base electrolyte. Example cosolvents include methyl formate, ethyl acetate, methyl acetate, propionitrile, butyronitrile, and 1,3-dioxolane. A quaternary ammonium salt including at least one of triethylmethylammonium tetrafluoroborate (TEMATFB) and spiro-(1,1')-bipyrrolidium tetrafluoroborate (SBPBF.sub.4), is used in an optimized concentration (e.g., 0.10 M to 0.75 M), dissolved into the electrolyte solution. Conventional device form factors and structural elements (e.g., porous carbon electrodes and a polyethylene separator) may be employed.

  5. A modified Poisson-Boltzmann analysis of the capacitance behavior of the electric double layer at low temperatures.

    PubMed

    Bhuiyan, L B; Outhwaite, C W; Henderson, D

    2005-07-15

    The modified Poisson-Boltzmann theory is used to analyze the anomalous behavior of the electric double layer capacitance for small surface charge at low temperatures and densities. Good agreement is found with simulation and recent density-functional theory results. Negative adsorption is also found in line with theory and simulation. An unsatisfactory feature is the relatively poor structure in this region due to the inherent approximations in the theory. This feature is unimportant in relation to the capacitance results but has implications when calculating adsorption properties.

  6. Structure of cylindrical electric double layers: A systematic study by Monte Carlo simulations and density functional theory

    NASA Astrophysics Data System (ADS)

    Goel, Teena; Patra, Chandra N.; Ghosh, Swapan K.; Mukherjee, Tulsi

    2008-10-01

    We present a systematic study of the structure of cylindrical double layers to envisage the distribution of small ions around a cylindrical polyion through canonical Monte Carlo simulation and density functional theory. The polyion is modeled as an infinite, rigid, and impenetrable charged cylinder surrounded by charged hard spheres of equal diameter modeled for small ions of the electrolyte. The solvent is considered as dielectric continuum. The theory is partially perturbative where the hard sphere contribution to the total excess free energy is evaluated using weighted density approximation, and the ionic interactions are calculated using quadratic Taylor expansion with respect to a uniform fluid. The system is studied over a wide range of parameters, viz., ionic concentrations, valences, and ionic sizes as well as for varying axial charge densities of the polyion. The theoretical predictions are observed to be in good agreement with that of simulation results. Some interesting phenomena relating to the width of the diffuse layer, mean electrostatic potential, and charge inversion have been observed to be dependent on different parametric conditions.

  7. Double Layers in Astrophysics

    NASA Technical Reports Server (NTRS)

    Williams, Alton C. (Editor); Moorehead, Tauna W. (Editor)

    1987-01-01

    Topics addressed include: laboratory double layers; ion-acoustic double layers; pumping potential wells; ion phase-space vortices; weak double layers; electric fields and double layers in plasmas; auroral double layers; double layer formation in a plasma; beamed emission from gamma-ray burst source; double layers and extragalactic jets; and electric potential between plasma sheet clouds.

  8. How Cylindrical is the Main Himalayan Thrust? Insights from Low - Temperature Thermochronology and Numerical Modelling

    NASA Astrophysics Data System (ADS)

    Robert, X.; van der Beek, P.; Braun, J.; Mugnier, J.

    2008-12-01

    We study the recent dynamics of the Himalayan orogen in central Nepal with the specific goal of quantifying the onset of activity and the deformation history recorded by the different major thrusts along the Himalayan range, and propose a structural and kinematic model of the major crustal Himalayan thrust, the MHT. We report 27 new apatite fission-track (AFT) ages collected along north - south transects in western and eastern - central Nepal (Kali Gandaki and Trisuli Rivers). AFT ages are consistently young (< 3 My) along both N-S transects in the MCT zone and increase (4 to 6 My) toward the south in the Lesser Himalaya. We present and compare 2 age - elevation transects, one in the MCT zone and one in the outer Lesser Himalaya, and interpret them in terms of exhumation rate that we use to constrain the geometry of the MHT ramp. The Himalayan range is commonly presented as a cylindrical structure from west to east. However, geological structures, topography, precipitation rate, convergence rates and low - temperature thermochronological ages all vary significantly along strike. Here, we focus on the interpretation of thermochronological datasets in term of cylindricity in geometry and kinematics of the MHT along the Himalayan range. We compare our new data to published low-temperature thermochronological datasets for western - central Nepal, eastern - central Nepal and the Bhutan Himalaya. We use these data to perform numerical thermal- kinematic modelling with a modified version of the PECUBE code, in order to constrain potential along-strike variations in the kinematics of the Himalayan range. Our results show that lateral variations in geometry of the MHT (in particular the presence or absence of a major ramp) strongly control the kinematics and exhumation history of the orogen.

  9. Teaching the Double Layer.

    ERIC Educational Resources Information Center

    Bockris, J. O'M.

    1983-01-01

    Suggests various methods for teaching the double layer in electrochemistry courses. Topics addressed include measuring change in absolute potential difference (PD) at interphase, conventional electrode potential scale, analyzing absolute PD, metal-metal and overlap electron PDs, accumulation of material at interphase, thermodynamics of electrified…

  10. Tests on Double Layer Metalization

    NASA Technical Reports Server (NTRS)

    Woo, D. S.

    1983-01-01

    28 page report describes experiments in fabrication of integrated circuits with double-layer metalization. Double-layer metalization requires much less silicon "real estate" and allows more flexibility in placement of circuit elements than does single-layer metalization.

  11. Advanced double layer capacitors

    NASA Technical Reports Server (NTRS)

    Sarangapani, S.; Lessner, P.; Forchione, J.; Laconti, A. B.

    1989-01-01

    There is a need for large amounts of power to be delivered rapidly in a number of airborne and space systems. Conventional, portable power sources, such as batteries, are not suited to delivering high peak power pulses. The charge stored at the electrode-electrolyte double layer is, however, much more assessible on a short time scale. Devices exploiting this concept were fabricated using carbon and metal oxides (Pinnacle Research) as the electrodes and sulfuric acid as the electrolyte. The approach reported, replaces the liquid sulfuric acid electrolyte with a solid ionomer electrolyte. The challenge is to form a solid electrode-solid ionomer electrolyte composite which has a high capacitance per geometric area. The approach to maximize contact between the electrode particles and the ionomer was to impregnate the electrode particles using a liquid ionomer solution and to bond the solvent-free structure to a solid ionomer membrane. Ruthenium dioxide is the electrode material used. Three strategies are being pursued to provide for a high area electrode-ionomer contact: mixing of the RuOx with a small volume of ionomer solution followed by filtration to remove the solvent, and impregnation of the ionomer into an already formed RuOx electrode. RuOx powder and electrodes were examined by non-electrochemical techniques. X-ray diffraction has shown that the material is almost pure RuO2. The electrode structure depends on the processing technique used to introduce the Nafion. Impregnated electrodes have Nafion concentrated near the surface. Electrodes prepared by the evaporation method show large aggregates of crystals surrounded by Nafion.

  12. Theory of nonmonotonic double layers

    SciTech Connect

    Kim, K.Y.

    1987-12-01

    A simple graphic method of solving the Vlasov--Poisson system associated with nonlinear eigenvalue conditions for arbitrary potential structures is presented. A general analytic formulation for nonmonotonic double layers is presented and illustrated with some particular closed form solutions. This class of double layers satisfies the time stationary Vlasov--Poisson system while requiring a Sagdeev potential, which is a double-valued function of the physical potential. It follows that any distribution function having a density representation as any integer or noninteger power series of potential can never satisfy the nonmonotonic double-layer boundary conditions. A Korteweg--de Vries-like equation is found showing a relationship among the speed of the nonmonotonic double layer, its scale length, and its degree of asymmetry.

  13. Current driven weak double layers

    NASA Technical Reports Server (NTRS)

    Chanteur, Gerard

    1987-01-01

    Double layers in plasmas can be created by different means. For example, a potential difference forms between two plasmas with different temperatures, in a plasma jet flowing along a converging magnetic field, in a quiescent plasma submitted to an external difference of potential, or in a turbulent plasma carrying an electric charge. The first three cases can be current-free, but not necessarily, although the numerical simulations were made under such conditions for the first two points. Apart from the third case, which is mainly of interest for laboratory experiments, these double layers are good candidates for accelerating the auroral electrons to the few kiloelectron volts observed.

  14. A laboratory investigation of potential double layers

    NASA Technical Reports Server (NTRS)

    Leung, Philip

    1987-01-01

    In a triple plasma device, the injection of electron current from the source chamber to the target chamber causes the formation of a potential double layer. At a low current density, the space charge of the injected current produces a virtual cathode-type potential double layer. This double layer is stable, and various wave instabilities are observed to associate with this double layer. As the current density is increased, the double layer becomes unstable, and a moving double layer results. As the current density is increased further, the enhanced ionization causes the neutralization of the space charge of the electron beam, and the beam plasma discharge is ignited.

  15. A laboratory investigation of potential double layers

    NASA Technical Reports Server (NTRS)

    Leung, Philip

    1987-01-01

    In a triple plasma device, the injection of electron current from the source chamber to the target chamber causes the formation of a potential double layer. At a low current density, the space charge of the injected current produces a virtual cathode-type potential double layer. This double layer is stable and various wave instabilities are observed to associate with this double layer. As the current density is increased, the double layer becomes unstable and a moving double layer results. As the current density is increased further, the enhanced ionization causes the neutralization of the space charge of the electron beam and the 'beam plasma discharge' is ignited.

  16. Low-Temperature Supercapacitors

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J.; West, William C.; Smart, Marshall C.

    2008-01-01

    An effort to extend the low-temperature operational limit of supercapacitors is currently underway. At present, commercially available non-aqueous supercapacitors are rated for a minimum operating temperature of -40 C. A capability to operate at lower temperatures would be desirable for delivering power to systems that must operate in outer space or in the Polar Regions on Earth. Supercapacitors (also known as double-layer or electrochemical capacitors) offer a high power density (>1,000 W/kg) and moderate energy density (about 5 to 10 Wh/kg) technology for storing energy and delivering power. This combination of properties enables delivery of large currents for pulsed applications, or alternatively, smaller currents for low duty cycle applications. The mechanism of storage of electric charge in a supercapacitor -- at the electrical double-layer formed at a solid-electrode/liquid-electrolyte interface -- differs from that of a primary or secondary electrochemical cell (i.e., a battery) in such a manner as to impart a long cycle life (typically >10(exp 6) charge/discharge cycles).

  17. Heat generation in double layer capacitors

    NASA Astrophysics Data System (ADS)

    Schiffer, Julia; Linzen, Dirk; Sauer, Dirk Uwe

    Thermal management is a key issue concerning lifetime and performance of double layer capacitors and battery technologies. Double layer capacitor modules for hybrid vehicles are subject to heavy duty cycling conditions and therefore significant heat generation occurs. High temperature causes accelerated aging of the double layer capacitors and hence reduced lifetime. To investigate the thermal behavior of double layer capacitors, thermal measurements during charge/discharge cycles were performed. These measurements show that heat generation in double layer capacitors is the superposition of an irreversible Joule heat generation and a reversible heat generation caused by a change in entropy. A mathematical representation of both parts is provided.

  18. Simulation of plasma double-layer structures

    NASA Technical Reports Server (NTRS)

    Borovsky, J. E.; Joyce, G.

    1982-01-01

    Electrostatic plasma double layers are numerically simulated by means of a magnetized 2 1/2 dimensional particle in cell method. The investigation of planar double layers indicates that these one dimensional potential structures are susceptible to periodic disruption by instabilities in the low potential plasmas. Only a slight increase in the double layer thickness with an increase in its obliqueness to the magnetic field is observed. Weak magnetization results in the double layer electric field alignment of accelerated particles and strong magnetization results in their magnetic field alignment. The numerical simulations of spatially periodic two dimensional double layers also exhibit cyclical instability. A morphological invariance in two dimensional double layers with respect to the degree of magnetization implies that the potential structures scale with Debye lengths rather than with gyroradii. Electron beam excited electrostatic electron cyclotron waves and (ion beam driven) solitary waves are present in the plasmas adjacent to the double layers.

  19. Double layers and circuits in astrophysics

    NASA Technical Reports Server (NTRS)

    Alfven, Hannes

    1986-01-01

    As the rate of energy release in a double layer with voltage delta V is P approx I delta V, a double layer must be treated as a part of a circuit which delivers the current I. As neither double layer nor circuit can be derived from magnetofluid models of a plasma, such models are useless for treating energy transfer by means of double layers. They must be replaced by particle models and circuit theory. A simple circuit is suggested which is applied to the energizing of auroral particles, to solar flares, and to intergalactic double radio sources. Application to the heliospheric current systems leads to the prediction of two double layers on the Sun's axis which may give radiations detectable from Earth. Double layers in space should be classified as a new type of celestial object (one example is the double radio sources). It is tentatively suggested in X-ray and Gamma-ray bursts may be due to exploding double layers (although annihilation is an alternative energy source). A study of how a number of the most used textbooks in astrophysics treat important concepts like double layers, critical velocity, pinch effects and circuits is made.

  20. Electron temperature differences and double layers

    NASA Technical Reports Server (NTRS)

    Chan, C.; Hershkowitz, N.; Lonngren, K. E.

    1983-01-01

    Electron temperature differences across plasma double layers are studied experimentally. It is shown that the temperature differences across a double layer can be varied and are not a result of thermalization of the bump-on-tail distribution. The implications of these results for electron thermal energy transport in laser-pellet and tandem-mirror experiments are also discussed.

  1. Improved Low Temperature Performance of Supercapacitors

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J.; West, William C.; Smart, Marshall C.; Gnanaraj, Joe

    2013-01-01

    Low temperature double-layer capacitor operation enabled by: - Base acetonitrile / TEATFB salt formulation - Addition of low melting point formates, esters and cyclic ethers center dot Key electrolyte design factors: - Volume of co-solvent - Concentration of salt center dot Capacity increased through higher capacity electrodes: - Zeolite templated carbons - Asymmetric cell designs center dot Continuing efforts - Improve asymmetric cell performance at low temperature - Cycle life testing Motivation center dot Benchmark performance of commercial cells center dot Approaches for designing low temperature systems - Symmetric cells (activated carbon electrodes) - Symmetric cells (zeolite templated carbon electrodes) - Asymmetric cells (lithium titanate/activated carbon electrodes) center dot Experimental results center dot Summary

  2. Electric fields and double layers in plasmas

    NASA Technical Reports Server (NTRS)

    Singh, Nagendra; Thiemann, H.; Schunk, R. W.

    1987-01-01

    Various mechanisms for driving double layers in plasmas are briefly described, including applied potential drops, currents, contact potentials, and plasma expansions. Some dynamical features of the double layers are discussed. These features, as seen in simulations, laboratory experiments, and theory, indicate that double layers and the currents through them undergo slow oscillations which are determined by the ion transit time across an effective length of the system in which double layers form. It is shown that a localized potential dip forms at the low potential end of a double layer, which interrupts the electron current through it according to the Langmuir criterion, whenever the ion flux into the double is disrupted. The generation of electric fields perpendicular to the ambient magnetic field by contact potentials is also discussed. Two different situations were considered; in one, a low-density hot plasma is sandwiched between high-density cold plasmas, while in the other a high-density current sheet permeates a low-density background plasma. Perpendicular electric fields develop near the contact surfaces. In the case of the current sheet, the creation of parallel electric fields and the formation of double layers are also discussed when the current sheet thickness is varied. Finally, the generation of electric fields and double layers in an expanding plasma is discussed.

  3. Electric fields and double layers in plasmas

    NASA Astrophysics Data System (ADS)

    Singh, Nagendra; Thiemann, H.; Schunk, R. W.

    1987-05-01

    Various mechanisms for driving double layers in plasmas are briefly described, including applied potential drops, currents, contact potentials, and plasma expansions. Some dynamical features of the double layers are discussed. These features, as seen in simulations, laboratory experiments, and theory, indicate that double layers and the currents through them undergo slow oscillations which are determined by the ion transit time across an effective length of the system in which double layers form. It is shown that a localized potential dip forms at the low potential end of a double layer, which interrupts the electron current through it according to the Langmuir criterion, whenever the ion flux into the double is disrupted. The generation of electric fields perpendicular to the ambient magnetic field by contact potentials is also discussed. Two different situations were considered; in one, a low-density hot plasma is sandwiched between high-density cold plasmas, while in the other a high-density current sheet permeates a low-density background plasma. Perpendicular electric fields develop near the contact surfaces. In the case of the current sheet, the creation of parallel electric fields and the formation of double layers are also discussed when the current sheet thickness is varied. Finally, the generation of electric fields and double layers in an expanding plasma is discussed.

  4. A new hydrodynamic analysis of double layers

    NASA Technical Reports Server (NTRS)

    Hora, Heinrich

    1987-01-01

    A genuine two-fluid model of plasmas with collisions permits the calculation of dynamic (not necessarily static) electric fields and double layers inside of plasmas including oscillations and damping. For the first time a macroscopic model for coupling of electromagnetic and Langmuir waves was achieved with realistic damping. Starting points were laser-produced plasmas showing very high dynamic electric fields in nonlinear force-produced cavitous and inverted double layers in agreement with experiments. Applications for any inhomogeneous plasma as in laboratory or in astrophysical plasmas can then be followed up by a transparent hydrodynamic description. Results are the rotation of plasmas in magnetic fields and a new second harmonic resonance, explanation of the measured inverted double layers, explanation of the observed density-independent, second harmonics emission from laser-produced plasmas, and a laser acceleration scheme by the very high fields of the double layers.

  5. Double layers and circuits in astrophysics

    NASA Technical Reports Server (NTRS)

    Alfven, Hannes

    1986-01-01

    A simple circuit is applied to the energizing of auroral particles, to solar flares, and to intergalactic double radio sources. Application to the heliospheric current systems leads to the prediction of two double layers on the Sun's axis which may give radiations detectable from earth. Double layers in space should be classified as a new type of celestial object. It is suggested that X-ray and gamma-ray bursts may be due to exploding double layers (although annihilation is an alternative energy source). The way the most used textbooks in astrophysics treat concepts like double layers, critical velocity, pinch effects and circuits was studied. It is found that students using these textbooks remain essentially ignorant of even the existence of these, although some of the phenomena were discovered 50 yr ago.

  6. Double layers and circuits in astrophysics

    NASA Technical Reports Server (NTRS)

    Alfven, H.

    1986-01-01

    A simple circuit is applied to the energizing of auroral particles, to solar flares, and to intergalactic double radio sources. Application to the heliospheric current systems leads to the prediction of two double layers on the Sun's axis which may give radiations detectable from Earth. Double layers in space should be classified as a new type of celestial object. It is suggested that X-ray and gamma-ray bursts may be due to exploding double layers (although annihilation is an alternative energy source). The way the most used textbooks in astrophysics treat concepts like double layers, critical velocity, pinch effects and circuits was studied. It is found that students using these textbooks remain essentially ignorant of even the existence of these, although some of the phenomena were discovered 50 yr ago.

  7. Electron acceleration in stochastic double layers

    NASA Technical Reports Server (NTRS)

    Lotko, William

    1987-01-01

    Transversely localized double layers evolve randomly in turbulent regions of strongly magnetized plasma carrying current along the magnetic field. Results from numerical simulations and spacecraft observations in the auroral plasma indicate that the parallel electric field in such regions is microscopically intermittent or stochastic. The implications of stochastic double layer fields on electron acceleration will be discussed in terms of a statistical process involving ensemble averages over test particle motion. A Fokker-Planck equation can be derived for the electron phase space density, which depends on the mean and rms amplitudes of the double layers, the mean double layer density, and the initial electron velocity distribution. It is shown that the resulting electron acceleration is very sensitive to the ratio of the initial electron energy to the rms double layer amplitude. When this ratio is large, the acceleration process differs little from that expected in a dc electric field. When it is small, stochastic heating competes with directed acceleration. Evidence for both cases can be found in the auroral ionosphere in association with so-called inverted-V precipitation and collimated edge precipitation.

  8. Propagating double layers in electronegative plasmas

    SciTech Connect

    Meige, A.; Plihon, N.; Hagelaar, G. J. M.; Boeuf, J.-P.; Chabert, P.; Boswell, R. W.

    2007-05-15

    Double layers have been observed to propagate from the source region to the diffusion chamber of a helicon-type reactor filled up with a low-pressure mixture of Ar/SF{sub 6} [N. Plihon et al., J. Appl. Phys. 98, 023306 (2005)]. In the present paper the most significant and new experimental results are reported. A fully self-consistent hybrid model in which the electron energy distribution function, the electron temperature, and the various source terms are calculated is developed to investigate these propagating double layers. The spontaneous formation of propagating double layers is only observed in the simulation for system in which the localized inductive heating is combined with small diameter chambers. The conditions of formation and the properties of the propagating double layers observed in the simulation are in good agreement with that of the experiment. By correlating the results of the experiment and the simulation, a formation mechanism compatible with ion two-stream instability is proposed.

  9. Reversible Heating in Electric Double Layer Capacitors

    NASA Astrophysics Data System (ADS)

    Janssen, Mathijs; van Roij, René

    2017-03-01

    A detailed comparison is made between different viewpoints on reversible heating in electric double layer capacitors. We show in the limit of slow charging that a combined Poisson-Nernst-Planck and heat equation, first studied by d'Entremont and Pilon [J. Power Sources 246, 887 (2014), 10.1016/j.jpowsour.2013.08.024], recovers the temperature changes as predicted by the thermodynamic identity of Janssen et al. [Phys. Rev. Lett. 113, 268501 (2014), 10.1103/PhysRevLett.113.268501], and disagrees with the approximative model of Schiffer et al. [J. Power Sources 160, 765 (2006), 10.1016/j.jpowsour.2005.12.070] that predominates the literature. The thermal response to the adiabatic charging of supercapacitors contains information on electric double layer formation that has remained largely unexplored.

  10. Double layer capacitance of carbon foam electrodes

    SciTech Connect

    Delnick, F.M.; Ingersoll, D.; Firsich, D.

    1993-11-01

    We have evaluated a wide variety of microcellular carbon foams prepared by the controlled pyrolysis and carbonization of several polymers including: polyacrylonitrile (PAN), polymethacrylonitrile (PMAN), resorcinol/formaldehyde (RF), divinylbenzene/methacrylonitrile (DVB), phenolics (furfuryl/alcohol), and cellulose polymers such as Rayon. The porosity may be established by several processes including: Gelation (1-5), phase separation (1-3,5-8), emulsion (1,9,10), aerogel/xerogel formation (1,11,12,13), replication (14) and activation. In this report we present the complex impedance analysis and double layer charging characteristics of electrodes prepared from one of these materials for double layer capacitor applications, namely activated cellulose derived microcellular carbon foam.

  11. Double layer capacitance of carbon foam electrodes

    NASA Astrophysics Data System (ADS)

    Delnick, F. M.; Ingersoll, D.; Firsich, D.

    We have evaluated a wide variety of microcellular carbon foams prepared by the controlled pyrolysis and carbonization of several polymers including: polyacrylonitrile (PAN), polymethacrylonitrile (PMAN), resorcinol/formaldehyde (RF), divinylbenzene/methacrylonitrile (DVB), phenolics (furfuryl/alcohol), and cellulose polymers such as Rayon. The porosity may be established by several processes including: gelation (1-5), phase separation (1-3,5-8), emulsion (1,9,10), aerogel/xerogel formation (1,11,12,13), replication (14), and activation. In this report we present the complex impedance analysis and double layer charging characteristics of electrodes prepared from one of these materials for double layer capacitor applications, namely activated cellulose derived microcellular carbon foam.

  12. Double layers acting as particles accelerators

    SciTech Connect

    Sanduloviciu, M.; Lozneanu, E.

    1995-12-31

    It is shown that self-consistent stable and unstable double layers generated in plasma after a self-organisation process are able to accelerate charged particles. The implication of cosmic double layers (Dls) in the acceleration of electrical charged particles long been advocated by Alfven and his Stockholm school is today disputed by argument that static electric fields associated with Dls are conservative and consequently the line integral of the electric field outside the DL balances the line integral inside it. Related with this dispute we will evidence some, so far not considered, facts which are in our opinion arguments that aurora Dls are able to energize particles. For justifying this assertion we start from recent experimental results concerning the phenomenology of self-consistent Dls whose generation involve beside ionisations the neutrals excitations which are at tile origin of the light phenomena as those observed in auroras.

  13. Reversible Heating in Electric Double Layer Capacitors.

    PubMed

    Janssen, Mathijs; van Roij, René

    2017-03-03

    A detailed comparison is made between different viewpoints on reversible heating in electric double layer capacitors. We show in the limit of slow charging that a combined Poisson-Nernst-Planck and heat equation, first studied by d'Entremont and Pilon [J. Power Sources 246, 887 (2014)JPSODZ0378-775310.1016/j.jpowsour.2013.08.024], recovers the temperature changes as predicted by the thermodynamic identity of Janssen et al. [Phys. Rev. Lett. 113, 268501 (2014)PRLTAO0031-900710.1103/PhysRevLett.113.268501], and disagrees with the approximative model of Schiffer et al. [J. Power Sources 160, 765 (2006)JPSODZ0378-775310.1016/j.jpowsour.2005.12.070] that predominates the literature. The thermal response to the adiabatic charging of supercapacitors contains information on electric double layer formation that has remained largely unexplored.

  14. Coulomb Drag and Magnetotransport in Graphene Double Layers

    NASA Astrophysics Data System (ADS)

    Tutuc, Emanuel

    2013-03-01

    Graphene double layers, a set of two closely spaced graphene monolayers seperated by an ultra-thin dielectric, represent an interesting electron system to explore correlated electron states. We discuss the fabrication of such samples using a layer-by-layer transfer approach, the electron transport in individual layers at zero and in a high magnetic field, and Coulomb drag measurements. Coulomb drag, probed by flowing a drive current in one layer, and measuring the voltage drop in the opposite layer provides a direct measurement of the electron-electron scattering between the two layers, and can be used to probe the electron system ground state. Coulomb drag in graphene, measured as a function of both layer densities and temperature reveals two distinct regimes: (i) diffusive drag at elevated temperatures, above 50 K, and (ii) mesoscopic fluctuations-dominated drag at low temperatures. A second topic discussed here is a technique that allows a direct measurement of the Fermi energy in an electron system with an accuracy independent of the sample size, using a graphene double layer heterostructure. The underlying principle of the technique is that an interlayer bias applied to bring the top layer to the charge neutrality point is equal to the Fermi energy of the bottom layer, which in effect renders the top graphene layer a resistively detected Kelvin probe. We illustrate this method by measuring the Fermi velocity, Landau level spacing, and Landau level broadening in monolayer graphene. Work done in collaboration with S. Kim, I. Jo, J. Nah, D. Dillen, K. Lee, B. Fallahazad, Z. Yao, and S. K. Banerjee. We thank ONR, NRI, and NSF for support.

  15. Rotating structures and vortices in low temperature plasmas

    NASA Astrophysics Data System (ADS)

    Boeuf, Jean-Pierre

    2014-10-01

    Rotating structures are present in a number of low temperature EXB devices such as Hall thrusters, magnetrons, Penning discharges etc...Some aspects of the physics of these rotating instabilities are specific to low temperature plasmas because of the relatively large collisionality, the role of ionization, and the fact that ions are often non-magnetized. On the basis of fully kinetic simulations (Particle-In-Cell Monte Carlo Collisions) we describe the formation of a rotating instability associated with an ionization front (``rotating spoke'') and driven by a cross-field current in a self-sustained cylindrical magnetron discharge at gas pressure on the order of 1 Pa. The rotating spoke is a strong double layer (electrostatic sheath) moving towards the higher potential region at a velocity close to the critical ionization velocity, a concept proposed by Alfvén in the context of the formation of the solar system. The mechanisms of cross-field electron transport induced by this instability are analyzed. At lower pressure (<0.01 Pa) the plasma of a magnetron discharge is non-neutral and the simulations predict the formation of electron vortices rotating in the azimuthal direction and resulting from the diocotron instability. The properties of these vortices are specific since they form in a self-sustained discharge where ionization (and losses at the ends of the plasma column) play an essential role in contrast with the electron vortices in pure electron plasmas. We discuss and analyze the mechanisms leading to the generation, dynamics and merging of these self-sustained electron vortices, and to the periodic ejection of fast electrons at the column ends (consistent with previous experimental observations).

  16. Double layered tailorable advanced blanket insulation

    NASA Technical Reports Server (NTRS)

    Falstrup, D.

    1983-01-01

    An advanced flexible reusable surface insulation material for future space shuttle flights was investigated. A conventional fly shuttle loom with special modifications to weave an integral double layer triangular core fabric from quartz yarn was used. Two types of insulating material were inserted into the cells of the fabric, and a procedure to accomplish this was developed. The program is follow up of a program in which single layer rectangular cell core fabrics are woven and a single type of insulating material was inserted into the cells.

  17. Electric fields and double layers in plasmas

    NASA Astrophysics Data System (ADS)

    Singh, Nagendra; Thiemann, H.; Schunk, R. W.

    1987-05-01

    Various mechanisms for driving double layers (DLs) in plasmas are described, including applied potential drops, currents, contact potentials, and plasma expansions. Somne dynamic features of the DLs are discussed; and it is demonstrated that DLs and the currents through them undergo slow oscillations, determined by the ion transit time across an effective length of the system in which the DLs form. It is shown that a localized potential dip forms at the low potential end of a DL, which interrupts the electron current through it according to the Langmuir criterion whenever the ion flux into the DL is disrupted. Also considered is the generation of electric fields perpendicular to the ambient magnetic field by contact potentials.

  18. Double-layered ZnO nanostructures for efficient perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Mahmood, Khalid; S. Swain, Bhabani; Amassian, Aram

    2014-11-01

    To date, a single layer of TiO2 or ZnO has been the most successful implementations of any electron transport layer (ETL) in solution-processed perovskite solar cells. In a quest to improve the ETL, we explore a new nanostructured double-layer ZnO film for mesoscopic perovskite-based thin film photovoltaics. This approach yields a maximum power conversion efficiency of 10.35%, which we attribute to the morphology of oxide layer and to faster electron transport. The successful implementation of the low-temperature hydrothermally processed double-layer ZnO film as ETL in perovskite solar cells highlights the opportunities to further improve the efficiencies by focusing on the ETL in this rapidly developing field.

  19. Double-layered ZnO nanostructures for efficient perovskite solar cells.

    PubMed

    Mahmood, Khalid; S Swain, Bhabani; Amassian, Aram

    2014-12-21

    To date, a single layer of TiO2 or ZnO has been the most successful implementations of any electron transport layer (ETL) in solution-processed perovskite solar cells. In a quest to improve the ETL, we explore a new nanostructured double-layer ZnO film for mesoscopic perovskite-based thin film photovoltaics. This approach yields a maximum power conversion efficiency of 10.35%, which we attribute to the morphology of oxide layer and to faster electron transport. The successful implementation of the low-temperature hydrothermally processed double-layer ZnO film as ETL in perovskite solar cells highlights the opportunities to further improve the efficiencies by focusing on the ETL in this rapidly developing field.

  20. Observation of electron hole, double layer, and turbulent heating in a laboratory plasma

    NASA Astrophysics Data System (ADS)

    Tsukishima, T.; Inuzuka, H.

    1990-08-01

    Nonlinear phenomena such as electron hole, double layer, and turbulent heating, which were observed in a linear mirror device, THE NU-II, are reviewed. Observations were carried out with a temporal resolution of 2 ns and a spatial resolution of 1 mm, respectively. Upon applying a voltage difference of the order of 10 kV between two electrodes inserted in the cylindrical plasma at a distance of 67 cm, the nonlinear phenomena evolved consecutively. In particular, a strong current limited double layer was formed, and its lifetime was found to satisfy a simple empirical law. One dimensional computer simulations based on a kinetic code were carried out with boundary conditions close to the experimental ones. The effect of magnetic field was taken into consideration in the simulations.

  1. Coronal electron confinement by double layers

    SciTech Connect

    Li, T. C.; Drake, J. F.; Swisdak, M.

    2013-12-01

    In observations of flare-heated electrons in the solar corona, a longstanding problem is the unexplained prolonged lifetime of the electrons compared to their transit time across the source. This suggests confinement. Recent particle-in-cell (PIC) simulations, which explored the transport of pre-accelerated hot electrons through ambient cold plasma, showed that the formation of a highly localized electrostatic potential drop, in the form of a double layer (DL), significantly inhibited the transport of hot electrons. The effectiveness of confinement by a DL is linked to the strength of the DL as defined by its potential drop. In this work, we investigate the scaling of the DL strength with the hot electron temperature by PIC simulations and find a linear scaling. We demonstrate that the strength is limited by the formation of parallel shocks. Based on this, we analytically determine the maximum DL strength, and also find a linear scaling with the hot electron temperature. The DL strength obtained from the analytic calculation is comparable to that from the simulations. At the maximum strength, the DL is capable of confining a significant fraction of hot electrons in the source.

  2. Anomalous dc resistivity and double layers in the auroral ionosphere

    SciTech Connect

    Kindel, J.M.; Barnes, C.; Forslund, D.W.

    1980-01-01

    There are at least four candidate instabilities which might account for anomalous dc rereresistivity in the auroral ionosphere. These are: the ion-acoustic instability, the Buneman instability, the ion-cyclotron instability and double layers. Results are reported of computer simulations of these four instabilities which suggest that double layers are most likely to be responsible for sistivity in the auroral zone.

  3. Skin explosion of double-layer conductors in fast-rising high magnetic fields

    SciTech Connect

    Chaikovsky, S. A. Datsko, I. M.; Labetskaya, N. A.; Ratakhin, N. A.

    2014-04-15

    An experiment has been performed to study the electrical explosion of thick cylindrical conductors using the MIG pulsed power generator capable of producing a peak current of 2.5 MA within 100 ns rise time. The experimental goal was to compare the skin explosion of a solid conductor with that of a double-layer conductor whose outer layer had a lower conductivity than the inner one. It has been shown that in magnetic fields of peak induction up to 300 T and average induction rise rate 3 × 10{sup 9} T/s, the double-layer structure of a conductor makes it possible to achieve higher magnetic induction at the conductor surface before it explodes. This can be accounted for, in particular, by the reduction of the ratio of the Joule heat density to the energy density of the magnetic field at the surface of a double-layer conductor due to redistribution of the current density over the conductor cross section.

  4. Skin explosion of double-layer conductors in fast-rising high magnetic fields

    NASA Astrophysics Data System (ADS)

    Chaikovsky, S. A.; Oreshkin, V. I.; Datsko, I. M.; Labetskaya, N. A.; Ratakhin, N. A.

    2014-04-01

    An experiment has been performed to study the electrical explosion of thick cylindrical conductors using the MIG pulsed power generator capable of producing a peak current of 2.5 MA within 100 ns rise time. The experimental goal was to compare the skin explosion of a solid conductor with that of a double-layer conductor whose outer layer had a lower conductivity than the inner one. It has been shown that in magnetic fields of peak induction up to 300 T and average induction rise rate 3 × 109 T/s, the double-layer structure of a conductor makes it possible to achieve higher magnetic induction at the conductor surface before it explodes. This can be accounted for, in particular, by the reduction of the ratio of the Joule heat density to the energy density of the magnetic field at the surface of a double-layer conductor due to redistribution of the current density over the conductor cross section.

  5. Challenges facing lithium batteries and electrical double-layer capacitors.

    PubMed

    Choi, Nam-Soon; Chen, Zonghai; Freunberger, Stefan A; Ji, Xiulei; Sun, Yang-Kook; Amine, Khalil; Yushin, Gleb; Nazar, Linda F; Cho, Jaephil; Bruce, Peter G

    2012-10-01

    Energy-storage technologies, including electrical double-layer capacitors and rechargeable batteries, have attracted significant attention for applications in portable electronic devices, electric vehicles, bulk electricity storage at power stations, and "load leveling" of renewable sources, such as solar energy and wind power. Transforming lithium batteries and electric double-layer capacitors requires a step change in the science underpinning these devices, including the discovery of new materials, new electrochemistry, and an increased understanding of the processes on which the devices depend. The Review will consider some of the current scientific issues underpinning lithium batteries and electric double-layer capacitors.

  6. Discharge rates of porous carbon double layer capacitors

    SciTech Connect

    Eisenmann, E.T.

    1995-10-01

    Double layer capacitors with porous carbon electrodes have very low frequency response limits and correspondingly low charge-discharge rates. Impedance measurements of various commercial double layer capacitors and of carbon electrodes prepared from selected precursor materials were found to yield similar, yet subtly different characteristics. Through modeling with the traditional transmission line equivalent circuit for porous electrodes, a resistive layer can be identified, which forms on carbon films during carbonization and survives the activation procedure. A method for determining the power-to-energy ratio of electrochemical capacitors has been developed. These findings help define new ways for optimizing the properties of double layer capacitors.

  7. Dust-acoustic double layers - Ion inertial effects

    NASA Technical Reports Server (NTRS)

    Mace, Richard L.; Hellberg, Manfred A.

    1993-01-01

    Space and astrophysical plasmas often comprise a number of massive ion components in addition to a tenuous, negatively charged dust component and an electron component. Stationary electrostatic double layers in a dusty plasma are investigated in a model treating the ion components as Boltzmann-distributed (inertialess) fluids. On comparison with the inertialess theory, one finds considerably reduced double layer existence parameter regimes. Significantly, highly nonlinear double layers are ruled out when ion inertia is incorporated. However, in the restricted parameter regimes in which the inertial theory predicts double layers for small ion/dust mass ratios (about 10 exp -15-10 exp -8) there is good qualitative agreement with inertialess theory. The reasons for these, and other discrepancies and similarities, are discussed.

  8. Attaining Low Temperatures

    ERIC Educational Resources Information Center

    Wheatley, John D.; Van Till, Howard J.

    1970-01-01

    Discusses the definition of temperature and the concept of order in non-mathematical terms. Describes the cooling techniques necessary in low temperature physics research, including magnetic cooling, the use of the Pomeranchuk Effect, and dilution refrigeration. Outlines the types of phenomena observed in matter within various temperature ranges…

  9. Low temperature fluid blender

    NASA Technical Reports Server (NTRS)

    Repas, G. A.

    1971-01-01

    Blender supplies hydrogen at temperatures from 289 deg K to 367 deg K. Hydrogen temperature is controlled by using blender to combine flow from liquid hydrogen tank /276 deg K/ and gaseous hydrogen cylinder /550 deg K/. Blenders are applicable where flow of controlled low-temperature fluid is desired.

  10. Low Temperature Powder Coating

    DTIC Science & Technology

    2011-02-09

    Patterson AFB, OH David Piatkowski, Chris Mahendra NAVAIR James Davila, Chris Geib SAIC Beavercreek, OH O G D E N A I R L O G I S T I C S C E N T...PUBLICATIONS Geib , C.W., Davila J.A., Patterson W., et al. “Low Temperature Cure Powder Coating, ESTCP Project WP-0614.” Joint Services Environmental...Management Conference, Columbus, Ohio. 21 – 24 May 2007. Geib , C.W., Davila J.A., Patterson W., et al. “Advances and Testing of Powder Coatings for Aerospace

  11. A Potential Role of Double Layers on Solar Wind Acceleration

    NASA Astrophysics Data System (ADS)

    Parks, G. K.; McCarthy, M.; Lee, E.; Hong, J.

    2012-12-01

    The distribution function of solar wind (SW) is non-Maxwellian and often includes field-aligned beams. Recently, electrostatic solitary waves (ESW) have been observed in the SW and they have been interpreted as double layers. Taking a cue from Earth's auroral observations that large-scale electric field parallel to magnetic field may be due to many double layers distributed along the geomagnetic field, we have looked at the potential role double layers could play in SW acceleration. This picture would suggest that the halo component of the SW represents a beam that has been accelerated by parallel electric field. The core electrons come from secondaries produced by the beam going through the solar coronal atmosphere. The source of the super-halo component is not known and we speculate that it could represent the field-aligned non-thermal high-energy halo electrons that have been accelerated to ``runaway" energies.

  12. A review of molecular modelling of electric double layer capacitors.

    PubMed

    Burt, Ryan; Birkett, Greg; Zhao, X S

    2014-04-14

    Electric double-layer capacitors are a family of electrochemical energy storage devices that offer a number of advantages, such as high power density and long cyclability. In recent years, research and development of electric double-layer capacitor technology has been growing rapidly, in response to the increasing demand for energy storage devices from emerging industries, such as hybrid and electric vehicles, renewable energy, and smart grid management. The past few years have witnessed a number of significant research breakthroughs in terms of novel electrodes, new electrolytes, and fabrication of devices, thanks to the discovery of innovative materials (e.g. graphene, carbide-derived carbon, and templated carbon) and the availability of advanced experimental and computational tools. However, some experimental observations could not be clearly understood and interpreted due to limitations of traditional theories, some of which were developed more than one hundred years ago. This has led to significant research efforts in computational simulation and modelling, aimed at developing new theories, or improving the existing ones to help interpret experimental results. This review article provides a summary of research progress in molecular modelling of the physical phenomena taking place in electric double-layer capacitors. An introduction to electric double-layer capacitors and their applications, alongside a brief description of electric double layer theories, is presented first. Second, molecular modelling of ion behaviours of various electrolytes interacting with electrodes under different conditions is reviewed. Finally, key conclusions and outlooks are given. Simulations on comparing electric double-layer structure at planar and porous electrode surfaces under equilibrium conditions have revealed significant structural differences between the two electrode types, and porous electrodes have been shown to store charge more efficiently. Accurate electrolyte and

  13. Double layer -- a particle accelerator in the magnetosphere

    SciTech Connect

    Fu, Xiangrong

    2015-07-16

    Slides present the material under the following topics: Introduction (What is a double layer (DL)? Why is it important? Key unsolved problems); Theory -- time-independent solutions of 1D Vlasov--Poisson system; Particle-in-cell simulations (Current-driven DLs); and Electron acceleration by DL (Betatron acceleration). Key problems include the generation mechanism, stability, and electron acceleration. In summary, recent observations by Van Allen Probes show large number of DLs in the outer radiation belt, associated with enhanced flux of relativistic electrons. Simulations show that ion acoustic double layers can be generated by field-aligned currents. Thermal electrons can gain energy via betatron acceleration in a dipole magnetic field.

  14. Enhanced intervalley scattering in artificially stacked double-layer graphene

    NASA Astrophysics Data System (ADS)

    Iqbal, M. Z.; Kelekçi, Özgür; Iqbal, M. W.; Jin, Xiaozhan; Hwang, Chanyong; Eom, Jonghwa

    2014-08-01

    We fabricated artificially stacked double-layer graphene by sequentially transferring graphene grown by chemical vapor deposition. The double-layer graphene was characterized by Raman spectroscopy and transport measurements. A weak localization effect was observed for different charge carrier densities and temperatures. The obtained intervalley scattering rate was unusually high compared to normal Bernal-stacked bilayer or single-layer graphene. The sharp point defects, local deformation, or bending of graphene plane required for intervalley scattering from one Dirac cone to another seemed to be enhanced by the artificially stacked graphene layers.

  15. Type I intermittency related to the spatiotemporal dynamics of double layers and ion-acoustic instabilities in plasma

    SciTech Connect

    Chiriac, S.; Dimitriu, D. G.; Sanduloviciu, M.

    2007-07-15

    Anodic double layer instabilities occur in low-temperature diffusion filament-type discharge plasma by applying a certain positive bias with respect to the plasma potential to an additional electrode. Periodic nonlinear regimes, characterized by proper dynamics of double layers, are sustained if excitation and ionization rates in front of the electrode reach the value for which current limitation effects appear in the static current-voltage characteristic. It was experimentally shown that under specific experimental conditions these ordered spatiotemporal phenomena can evolve into chaotic states by type I intermittency. This transition was verified by the evolution of time series, fast Fourier transform amplitude plots, three-dimensional reconstructed state spaces, power laws, and flickering phenomena spectrum, as well as by the return map and tangent bifurcation.

  16. Design, fabrication and characterization of a double layer solid oxide fuel cell (DLFC)

    NASA Astrophysics Data System (ADS)

    Wang, Guangjun; Wu, Xiangying; Cai, Yixiao; Ji, Yuan; Yaqub, Azra; Zhu, Bin

    2016-11-01

    A double layer solid oxide fuel cell (DLSOFC) without using the electrolyte (layer) has been designed by integrating advantages of positive electrode material of lithium ion battery(LiNi0.8Co0.15Al0.05O2) and oxygen-permeable membranes material (trace amount cobalt incorporated terbium doped ceria, TDC + Co) based on the semiconductor physics principle. Instead of using an electrolyte layer, the depletion layer between the anode and cathode served as an electronic insulator to block the electrons but to maintain the electrolyte function for ionic transport. Thus the device with two layers can realize the function of SOFC and at the same time avoids the electronic short circuiting problem. Such novel DLFC showed good performance at low temperatures, for instance, a maximum power density of 230 mWcm-2 was achieved at 500 °C. The working principle of the new device is presented.

  17. Multilabel Image Annotation Based on Double-Layer PLSA Model

    PubMed Central

    Zhang, Jing; Li, Da; Hu, Weiwei; Chen, Zhihua; Yuan, Yubo

    2014-01-01

    Due to the semantic gap between visual features and semantic concepts, automatic image annotation has become a difficult issue in computer vision recently. We propose a new image multilabel annotation method based on double-layer probabilistic latent semantic analysis (PLSA) in this paper. The new double-layer PLSA model is constructed to bridge the low-level visual features and high-level semantic concepts of images for effective image understanding. The low-level features of images are represented as visual words by Bag-of-Words model; latent semantic topics are obtained by the first layer PLSA from two aspects of visual and texture, respectively. Furthermore, we adopt the second layer PLSA to fuse the visual and texture latent semantic topics and achieve a top-layer latent semantic topic. By the double-layer PLSA, the relationships between visual features and semantic concepts of images are established, and we can predict the labels of new images by their low-level features. Experimental results demonstrate that our automatic image annotation model based on double-layer PLSA can achieve promising performance for labeling and outperform previous methods on standard Corel dataset. PMID:24999490

  18. Magnetic steering of a helicon double layer thruster

    SciTech Connect

    Charles, C.; Boswell, R. W.; Cox, W.; Laine, R.; MacLellan, P.

    2008-11-17

    The ion beam generated by a helicon double layer has been electrically steered up to 20 deg. off axis by using a solenoid placed normal to the two axial solenoids of the helicon plasma source without significantly changing the beam exhaust velocity.

  19. Double-layered cell transfer technology for bone regeneration

    PubMed Central

    Akazawa, Keiko; Iwasaki, Kengo; Nagata, Mizuki; Yokoyama, Naoki; Ayame, Hirohito; Yamaki, Kazumasa; Tanaka, Yuichi; Honda, Izumi; Morioka, Chikako; Kimura, Tsuyoshi; Komaki, Motohiro; Kishida, Akio; Izumi, Yuichi; Morita, Ikuo

    2016-01-01

    For cell-based medicine, to mimic in vivo cellular localization, various tissue engineering approaches have been studied to obtain a desirable arrangement of cells on scaffold materials. We have developed a novel method of cell manipulation called “cell transfer technology”, enabling the transfer of cultured cells onto scaffold materials, and controlling cell topology. Here we show that using this technique, two different cell types can be transferred onto a scaffold surface as stable double layers or in patterned arrangements. Various combinations of adherent cells were transferred to a scaffold, amniotic membrane, in overlapping bilayers (double-layered cell transfer), and transferred cells showed stability upon deformations of the material including folding and trimming. Transplantation of mesenchymal stem cells from periodontal ligaments (PDLSC) and osteoblasts, using double-layered cell transfer significantly enhanced bone formation, when compared to single cell type transplantation. Our findings suggest that this double-layer cell transfer is useful to produce a cell transplantation material that can bear two cell layers. Moreover, the transplantation of an amniotic membrane with PDLSCs/osteoblasts by cell transfer technology has therapeutic potential for bone defects. We conclude that cell transfer technology provides a novel and unique cell transplantation method for bone regeneration. PMID:27624174

  20. Double layer formation at the interface of complex plasmas

    SciTech Connect

    Yaroshenko, V. V.; Thoma, M. H.; Thomas, H. M.; Morfill, G. E.

    2008-08-15

    Necessary conditions are formulated for the generation of a double layer at the interface of a complex plasma and a particle-free electron-ion plasma in a weakly collisional discharge. Examples are calculated for realistic observed complex plasmas, and it is shown that situations of both ''smooth'' transitions and 'sharp' transitions can exist. The model can explain the abrupt boundaries observed.

  1. Study of the anode plasma double layer: optogalvanic detectors

    SciTech Connect

    Gurlui, S.; Dimitriu, D.; Strat, M.; Strat, Georgeta

    2006-01-15

    The experimental and theoretical results show that the anode double layer (DL) is a very sensitive plasma formation suitable for fine optogalvanic studies. The obtained results demonstrate that the parameters of the oscillations sustained by a DL (frequency, amplitude) can be used as optogalvanic detectors.

  2. On The Chaotic Dynamics Of Multiple Double Layers In Plasma

    SciTech Connect

    Ivan, L. M.; Chiriac, S. A.; Aflori, M.; Dimitriu, D. G.

    2007-04-23

    When a multiple double layers structure in plasma is driven far from equilibrium, it passes into a chaotic state, characterized by uncorrelated oscillations of the plasma parameters. Two scenarios of transition to chaos were identified: the Feigenbaum scenario (cascade of period doubling bifurcations) and the intermittency scenario.

  3. Pd/Ni-WO3 anodic double layer gasochromic device

    DOEpatents

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland; Liu, Ping

    2004-04-20

    An anodic double layer gasochromic sensor structure for optical detection of hydrogen in improved response time and with improved optical absorption real time constants, comprising: a glass substrate; a tungsten-doped nickel oxide layer coated on the glass substrate; and a palladium layer coated on the tungsten-doped nickel oxide layer.

  4. Insights from theory and simulation on the electrical double layer.

    PubMed

    Henderson, Douglas; Boda, Dezso

    2009-05-28

    Despite the fact that our conceptual understanding of the electrical double layer has advanced during the past few decades, the interpretation of experimental and applied work is still largely based on the venerable Poisson-Boltzmann theory of Gouy, Chapman and Stern. This is understandable since this theory is simple and analytic. However, it is not very accurate because the atomic/molecular nature of the ions/solvent and their correlations are ignored. Simulation and some theoretical studies by ourselves and others that have advanced our understanding are discussed. These studies show that the GCS theory predicts a narrow double layer with monotonic profiles. This is not correct. The double layer is wider, and there can be substantial layering that would be even more pronounced if explicit solvent molecules are considered. For many years, experimental studies of the double layer have been directed to the use of electrochemistry as an analytical tool. This is acceptable for analytic chemistry studies. However, the understanding of electrochemical reactions that typically occur at the electrode surface, where simulation and theory indicate that the GCS theory can have substantial errors, requires modern approaches. New, fundamental experimental studies that would lead to deeper insights using more novel systems would be desirable. Further, biophysics is an interesting field. Recent studies of the selectivity of ion channels and of the adsorption of ions in a binding sites of a protein have shown that the linearized GCS theory has substantial errors.

  5. Capacitance of carbon-based electrical double-layer capacitors.

    PubMed

    Ji, Hengxing; Zhao, Xin; Qiao, Zhenhua; Jung, Jeil; Zhu, Yanwu; Lu, Yalin; Zhang, Li Li; MacDonald, Allan H; Ruoff, Rodney S

    2014-01-01

    Experimental electrical double-layer capacitances of porous carbon electrodes fall below ideal values, thus limiting the practical energy densities of carbon-based electrical double-layer capacitors. Here we investigate the origin of this behaviour by measuring the electrical double-layer capacitance in one to five-layer graphene. We find that the capacitances are suppressed near neutrality, and are anomalously enhanced for thicknesses below a few layers. We attribute the first effect to quantum capacitance effects near the point of zero charge, and the second to correlations between electrons in the graphene sheet and ions in the electrolyte. The large capacitance values imply gravimetric energy storage densities in the single-layer graphene limit that are comparable to those of batteries. We anticipate that these results shed light on developing new theoretical models in understanding the electrical double-layer capacitance of carbon electrodes, and on opening up new strategies for improving the energy density of carbon-based capacitors.

  6. Capacitance of carbon-based electrical double-layer capacitors

    NASA Astrophysics Data System (ADS)

    Ji, Hengxing; Zhao, Xin; Qiao, Zhenhua; Jung, Jeil; Zhu, Yanwu; Lu, Yalin; Zhang, Li Li; MacDonald, Allan H.; Ruoff, Rodney S.

    2014-02-01

    Experimental electrical double-layer capacitances of porous carbon electrodes fall below ideal values, thus limiting the practical energy densities of carbon-based electrical double-layer capacitors. Here we investigate the origin of this behaviour by measuring the electrical double-layer capacitance in one to five-layer graphene. We find that the capacitances are suppressed near neutrality, and are anomalously enhanced for thicknesses below a few layers. We attribute the first effect to quantum capacitance effects near the point of zero charge, and the second to correlations between electrons in the graphene sheet and ions in the electrolyte. The large capacitance values imply gravimetric energy storage densities in the single-layer graphene limit that are comparable to those of batteries. We anticipate that these results shed light on developing new theoretical models in understanding the electrical double-layer capacitance of carbon electrodes, and on opening up new strategies for improving the energy density of carbon-based capacitors.

  7. Low Temperature Plasma Medicine

    NASA Astrophysics Data System (ADS)

    Graves, David

    2013-10-01

    Ionized gas plasmas near room temperature are used in a remarkable number of technological applications mainly because they are extraordinarily efficient at exploiting electrical power for useful chemical and material transformations near room temperature. In this tutorial address, I will focus on the newest area of low temperature ionized gas plasmas (LTP), in this case operating under atmospheric pressure conditions, in which the temperature-sensitive material is living tissue. LTP research directed towards biomedical applications such as sterilization, surgery, wound healing and anti-cancer therapy has seen remarkable growth in the last 3-5 years, but the mechanisms responsible for the biomedical effects have remained mysterious. It is known that LTP readily create reactive oxygen species (ROS) and reactive nitrogen species (RNS). ROS and RNS (or RONS), in addition to a suite of other radical and non-radical reactive species, are essential actors in an important sub-field of aerobic biology termed ``redox'' (or oxidation-reduction) biology. I will review the evidence suggesting that RONS generated by plasmas are responsible for their observed therapeutic effects. Other possible bio-active mechanisms include electric fields, charges and photons. It is common in LTP applications that synergies between different mechanisms can play a role and I will review the evidence for synergies in plasma biomedicine. Finally, I will address the challenges and opportunities for plasma physicists to enter this novel, multidisciplinary field.

  8. Low Temperature Rosseland Opacities

    NASA Astrophysics Data System (ADS)

    Alexander, D. R.

    1994-05-01

    A new, comprehensive set of low temperature opacity data for atoms and molecules has been assembled. From this basic data set, Rosseland and Planck mean opacities have been computed for temperatures between 12,500 K and 700 K. In addition to the standard continuous absorbers, atomic line absorption (with more than 8 million lines), molecular line absorption (with nearly 60 million lines), and grain absorption and scattering (by silicates, iron, carbon, and SiC) have been included. The absorption due to lines is computed monochromatically and included in the mean with the Opacity Sampling technique. Grains are assumed to form in chemical equilibrium and to form into a continuous distribution of ellipsoids which are randomly oriented. Agreement of these opacities with other recent tabulations of opacities (including OP (M. J. Seaton 1994, MNRAS, 266, 805) and OPAL (F. J. Rogers & C. A. Iglesias 1992, ApJS, 79, 507)) for temperatures above 5,000 K is excellent. It is shown that opacities which neglect molecules become unreliable for temperatures below 5,000 K. Similarly, grains must be included in the computation for temperatures below 1,000 - 1,700 K, depending upon the density. Opacity tables can be prepared for a wide variety of chemical compositions, and will be provided upon request. This research is supported by NSF grant AST-9217946.

  9. Preparation of activated carbon hollow fibers from ramie at low temperature for electric double-layer capacitor applications.

    PubMed

    Du, Xuan; Zhao, Wei; Wang, Yi; Wang, Chengyang; Chen, Mingming; Qi, Tao; Hua, Chao; Ma, Mingguo

    2013-12-01

    Activated carbon hollow fibers (ACHFs) with high surface area were prepared from inexpensive, renewable ramie fibers (RFs) by a single-step activation method under lower temperature than that of other reports. The effects of activation conditions on the pore structure and turbostratic structure of ACHFs were investigated systematically. The results show that ACHFs surface area decreased but micropore volume and conductivity increased as the increase of activation temperature and activation time. The electrochemical measurements of supercapacitors fabricated from these ACHFs electrodes reveal that the electrochemical properties improved with the enhancing of activation degree. However, too high activation temperature can make the ion diffusion resistance increase. It suggests that pore structure and conductivity are as important as surface area to decide the electrochemical performances of ACHFs electrode materials. A maximum capacity of 287 F g(-1) at 50 mA g(-1) was obtained for the ACHFs electrode prepared under suitable conditions.

  10. Electrical power generation by mechanically modulating electrical double layers.

    PubMed

    Moon, Jong Kyun; Jeong, Jaeki; Lee, Dongyun; Pak, Hyuk Kyu

    2013-01-01

    Since Michael Faraday and Joseph Henry made their great discovery of electromagnetic induction, there have been continuous developments in electrical power generation. Most people today get electricity from thermal, hydroelectric, or nuclear power generation systems, which use this electromagnetic induction phenomenon. Here we propose a new method for electrical power generation, without using electromagnetic induction, by mechanically modulating the electrical double layers at the interfacial areas of a water bridge between two conducting plates. We find that when the height of the water bridge is mechanically modulated, the electrical double layer capacitors formed on the two interfacial areas are continuously charged and discharged at different phases from each other, thus generating an AC electric current across the plates. We use a resistor-capacitor circuit model to explain the results of this experiment. This observation could be useful for constructing a micro-fluidic power generation system in the near future.

  11. Effects of double-layer polarization on ion transport.

    PubMed Central

    Hainsworth, A H; Hladky, S B

    1987-01-01

    It has been proposed that changes in ionic strength will alter the shape of current-voltage relations for ion transport across a lipid membrane. To investigate this effect, we measured currents across glyceryl monooleate membranes at applied potentials between 10 and 300 mV using either gramicidin and 1 mM NaCl or valinomycin and 1 mM KCl. A bridge circuit with an integrator as null detector was used to separate the capacitative and ionic components of the current. The changes in the current-voltage relations when ionic strength is varied between 1 and 100 mM are compared with predictions of Gouy-Chapman theory for the effects of these variations on polarization of the electrical diffuse double-layer. Double-layer polarization accounts adequately for the changes observed using membranes made permeable by either gramicidin or valinomycin. PMID:2432953

  12. Development and current status of electric double-layer capacitors

    SciTech Connect

    Morimoto, Takeshi; Hiratsuka, Kazuya; Sanada, Yasuhiro; Kurihara, Kaname

    1995-12-31

    An electric double layer capacitor (EDLC) based on the charge storage at the interface between a high surface area carbon electrode and an electrolyte solution is widely used as maintenance-free power source for IC memories and microcomputers. New applications for electric double-layer capacitors have been proposed in recent years. The popularity of these devices is derived from their high energy density relative to conventional capacitors and their long cycle life and high power density relative to batteries. In this paper a classification and a characteristics of industrially produced Japanese small EDLCs are reviewed. Structure and performance of power capacitors under development as well as materials and performance of industrially produced small capacitors are discussed.

  13. Effects of double-layer polarization on ion transport.

    PubMed

    Hainsworth, A H; Hladky, S B

    1987-01-01

    It has been proposed that changes in ionic strength will alter the shape of current-voltage relations for ion transport across a lipid membrane. To investigate this effect, we measured currents across glyceryl monooleate membranes at applied potentials between 10 and 300 mV using either gramicidin and 1 mM NaCl or valinomycin and 1 mM KCl. A bridge circuit with an integrator as null detector was used to separate the capacitative and ionic components of the current. The changes in the current-voltage relations when ionic strength is varied between 1 and 100 mM are compared with predictions of Gouy-Chapman theory for the effects of these variations on polarization of the electrical diffuse double-layer. Double-layer polarization accounts adequately for the changes observed using membranes made permeable by either gramicidin or valinomycin.

  14. Anomalous Coulomb drag in bilayer graphene double layers

    NASA Astrophysics Data System (ADS)

    Liu, Xiaomeng; Taniguchi, Takashi; Watanabe, Kenji; Kim, Philip

    Bilayer graphene double-layer structure consists of two layers of bilayer graphene separated by atomically thin hexagonal boron nitride (hBN). With a perfect Fermi surface nesting and strong electron-electron interaction (ECoulomb > Ekinetic), such systems offer exciting platforms to study interaction driven phenomena, such as Coulomb drag and exciton condensation. We fabricate ultra-clean encapsulated bilayer graphene double layers with dry pick-up method. Room temperature drag measurement on our devices shows the sign of drag agree with the typical Fermi liquid behavior. However, at lower temperatures, the sign of drag reversed, indicating a new drag mechanism emerges and dominates. We measure this with different geometry, temperature, bias and gating to investigate the origin of such effect and discuss the implication of the drag sign changes.

  15. Flexible nanoporous tunable electrical double layer biosensors for sweat diagnostics.

    PubMed

    Munje, Rujuta D; Muthukumar, Sriram; Panneer Selvam, Anjan; Prasad, Shalini

    2015-09-30

    An ultra-sensitive and highly specific electrical double layer (EDL) modulated biosensor, using nanoporous flexible substrates for wearable diagnostics is demonstrated with the detection of the stress biomarker cortisol in synthetic and human sweat. Zinc oxide thin film was used as active region in contact with the liquid i.e. synthetic and human sweat containing the biomolecules. Cortisol detection in sweat was accomplished by measuring and quantifying impedance changes due to modulation of the double layer capacitance within the electrical double layer through the application of a low orthogonally directed alternating current (AC) electric field. The EDL formed at the liquid-semiconductor interface was amplified in the presence of the nanoporous flexible substrate allowing for measuring the changes in the alternating current impedance signal due to the antibody-hormone interactions at diagnostically relevant concentrations. High sensitivity of detection of 1 pg/mL or 2.75 pmol cortisol in synthetic sweat and 1 ng/mL in human sweat is demonstrated with these novel biosensors. Specificity in synthetic sweat was demonstrated using a cytokine IL-1β. Cortisol detection in human sweat was demonstrated over a concentration range from 10-200 ng/mL.

  16. Flexible nanoporous tunable electrical double layer biosensors for sweat diagnostics

    NASA Astrophysics Data System (ADS)

    Munje, Rujuta D.; Muthukumar, Sriram; Panneer Selvam, Anjan; Prasad, Shalini

    2015-09-01

    An ultra-sensitive and highly specific electrical double layer (EDL) modulated biosensor, using nanoporous flexible substrates for wearable diagnostics is demonstrated with the detection of the stress biomarker cortisol in synthetic and human sweat. Zinc oxide thin film was used as active region in contact with the liquid i.e. synthetic and human sweat containing the biomolecules. Cortisol detection in sweat was accomplished by measuring and quantifying impedance changes due to modulation of the double layer capacitance within the electrical double layer through the application of a low orthogonally directed alternating current (AC) electric field. The EDL formed at the liquid-semiconductor interface was amplified in the presence of the nanoporous flexible substrate allowing for measuring the changes in the alternating current impedance signal due to the antibody-hormone interactions at diagnostically relevant concentrations. High sensitivity of detection of 1 pg/mL or 2.75 pmol cortisol in synthetic sweat and 1 ng/mL in human sweat is demonstrated with these novel biosensors. Specificity in synthetic sweat was demonstrated using a cytokine IL-1β. Cortisol detection in human sweat was demonstrated over a concentration range from 10-200 ng/mL.

  17. Completed double layer boundary element method for periodic suspensions

    NASA Astrophysics Data System (ADS)

    Fan, X.-J.; Phan-Thien, N.; Zheng, R.

    In this paper, a traction-based boundary element method is formulated and implemented for periodic suspensions. Hydrodynamic interaction of particles at infinity is handled by O'Brien's method (1979), which is suitably modified for the adjoint double layer using the mean field values of the traction and the background flow. After a deflation of the extreme eigenvalue -1 of the adjoint double layer operator, an iterative solution strategy is implemented, which solves for the traction field on the surfaces of a group of near-by particles sequentially. Ewald's summation technique is employed, by expressing the adjoint double layer kernel in two sums, one converges rapidly in real space, and the other, in the reciprocal Fourier space. The implementation is tested on a periodic suspension of spheres and spheroids in simple and elongated face-centred cubic arrays, and proved to be very accurate when compared to established results. New results for the intrinsic viscosities of periodic suspensions of cubes and spheroids from moderate to high volume fractions are reported. Based on the numerical data for suspensions of spheroids, a simple modification of the constitutive equation of Hinch and Leal (1972), which was derived for dilute suspension of spheroids, is reported, allowing the constitutive equation to reasonably fit the numerical data at moderate to high concentrations.

  18. Flexible nanoporous tunable electrical double layer biosensors for sweat diagnostics

    PubMed Central

    Munje, Rujuta D.; Muthukumar, Sriram; Panneer Selvam, Anjan; Prasad, Shalini

    2015-01-01

    An ultra-sensitive and highly specific electrical double layer (EDL) modulated biosensor, using nanoporous flexible substrates for wearable diagnostics is demonstrated with the detection of the stress biomarker cortisol in synthetic and human sweat. Zinc oxide thin film was used as active region in contact with the liquid i.e. synthetic and human sweat containing the biomolecules. Cortisol detection in sweat was accomplished by measuring and quantifying impedance changes due to modulation of the double layer capacitance within the electrical double layer through the application of a low orthogonally directed alternating current (AC) electric field. The EDL formed at the liquid-semiconductor interface was amplified in the presence of the nanoporous flexible substrate allowing for measuring the changes in the alternating current impedance signal due to the antibody-hormone interactions at diagnostically relevant concentrations. High sensitivity of detection of 1 pg/mL or 2.75 pmol cortisol in synthetic sweat and 1 ng/mL in human sweat is demonstrated with these novel biosensors. Specificity in synthetic sweat was demonstrated using a cytokine IL-1β. Cortisol detection in human sweat was demonstrated over a concentration range from 10–200 ng/mL. PMID:26420511

  19. Electrostatic supersolitons and double layers at the acoustic speed

    SciTech Connect

    Verheest, Frank; Hellberg, Manfred A.

    2015-01-15

    Supersolitons are characterized by subsidiary extrema on the sides of a typical bipolar electric field signature or by association with a root beyond double layers in the fully nonlinear Sagdeev pseudopotential description. It has been proven that supersolitons may exist in several plasmas having at least three constituent species, but they cannot be found in weakly nonlinear theory. Another recent aspect of pseudopotential theory is that in certain plasma models and parameter regimes solitons and/or double layers can exist at the acoustic speed, having no reductive perturbation counterparts. Importantly, they signal coexistence between solitons having positive and negative polarity, in that one solution can be realized at a time, depending on infinitesimal perturbations from the equilibrium state. Weaving the two strands together, we demonstrate here that one can even find supersolitons and double layers at the acoustic speed, as illustrated using the model of cold positive and negative ions, in the presence of nonthermal electrons following a Cairns distribution. This model has been discussed before, but the existence and properties of supersolitons at the acoustic speed were not established at the time of publication.

  20. Nonlinear Surface Transport in the Thin Double-Layer Limit

    NASA Astrophysics Data System (ADS)

    Chu, Kevin; Bazant, Martin

    2006-03-01

    At high applied electric fields, ionic transport within the double layer plays a significant role in the overall response of electrokinetic systems. It is well-known that surface transport processes, including surface electromigration, surface diffusion and surface advection, may impact the strength of electrokinetic phenomena by affecting both the zeta-potential and the magnitude of the tangential electric field. Therefore, it is important to include these effects when formulating the effective boundary conditions for the equations that govern electrokinetic flow outside of the double layer. In this talk, we discuss the application of a general formulation of ``surface conservation laws'' for diffuse boundary layers to derive effective boundary conditions that capture the physics of electrokinetic surface transport. Previous analyses (e.g. Deryagin & Dukhin 1969) are only valid for weak applied fields and are based on a linearization of the concentration and potential about a reference solution, but our results are fully nonlinear and hold at large applied fields as long as the double layer is sufficiently thin. We compare our nonlinear surface transport theory with existing linear analogues and apply it to the canonical problem of induced-charge electro-osmosis around a metal sphere or cylinder in a strong DC field.

  1. Two-dimensional potential double layers and discrete auroras

    NASA Technical Reports Server (NTRS)

    Kan, J. R.; Lee, L. C.; Akasofu, S.-I.

    1979-01-01

    This paper is concerned with the formation of the acceleration region for electrons which produce the visible auroral arc and with the formation of the inverted V precipitation region. The former is embedded in the latter, and both are associated with field-aligned current sheets carried by plasma sheet electrons. It is shown that an electron current sheet driven from the plasma sheet into the ionosphere leads to the formation of a two-dimensional potential double layer. For a current sheet of a thickness less than the proton gyrodiameter solutions are obtained in which the field-aligned potential drop is distributed over a length much greater than the Debye length. For a current sheet of a thickness much greater than the proton gyrodiameter solutions are obtained in which the potential drop is confined to a distance on the order of the Debye length. The electric field in the two-dimensional double-layer model is the zeroth-order field inherent to the current sheet configuration, in contrast to those models in which the electric field is attributed to the first-order field due to current instabilities or turbulences. The maximum potential in the two-dimensional double-layer models is on the order of the thermal energy of plasma sheet protons, which ranges from 1 to 10 keV.

  2. Energy from low temperature differences

    NASA Astrophysics Data System (ADS)

    Parsons, B. K.

    1985-05-01

    A number of energy conservation and alternative energy approaches utilize a low temperature heat source. Applications in this category include: solar ponds, ocean thermal energy conversion (OTEC), low temperature solar thermal, geothermal, and waste heat recovery and bottoming cycles. Low temperature power extraction techniques are presented and the differences between closed and open Rankine power cycles are discussed. Specific applications and technical areas of current research in OTEC along with a breakdown of plant operating conditions and a rough cost estimate illustrate how the use of low temperature power conversion technology can be cost effective.

  3. Dust-ion-acoustic double layers in multi-ion dusty plasma

    NASA Astrophysics Data System (ADS)

    Mamun, A. A.; Deeba, F.

    2015-08-01

    A theoretical investigation has been made on nonplanar (cylindrical and spherical) dust-ionacoustic (DIA) double layers (DLs) in a multi-ion dusty plasma system containing inertial positive and negative ions and arbitrarily charged stationary dust. The dust particles have been considered as arbitrarily (either positively or negatively) charged in order to observe the effects of the dust polarity on the DIA DLs. The ion species were considered to be at different temperatures to observe the effects of the temperatures on that waves. The modified Gardner equation, which has been derived by employing the reductive perturbation method, has been used to analyze time-dependent nonplanar and planar DIA DLs. It has been found that the time evolution of DIA DLs is significantly modified not only by the nonplanar geometry, but also by the polarity, temperature, and mass ratio of the constituent particles. It has been also found that the amplitude of cylindrical DIA DL structures is larger than that of 1D planar ones, but smaller than that of the spherical ones.

  4. Dust-ion-acoustic double layers in multi-ion dusty plasma

    SciTech Connect

    Mamun, A. A.; Deeba, F.

    2015-08-15

    A theoretical investigation has been made on nonplanar (cylindrical and spherical) dust-ionacoustic (DIA) double layers (DLs) in a multi-ion dusty plasma system containing inertial positive and negative ions and arbitrarily charged stationary dust. The dust particles have been considered as arbitrarily (either positively or negatively) charged in order to observe the effects of the dust polarity on the DIA DLs. The ion species were considered to be at different temperatures to observe the effects of the temperatures on that waves. The modified Gardner equation, which has been derived by employing the reductive perturbation method, has been used to analyze time-dependent nonplanar and planar DIA DLs. It has been found that the time evolution of DIA DLs is significantly modified not only by the nonplanar geometry, but also by the polarity, temperature, and mass ratio of the constituent particles. It has been also found that the amplitude of cylindrical DIA DL structures is larger than that of 1D planar ones, but smaller than that of the spherical ones.

  5. Spatial instability of viscous double-layer liquid sheets

    NASA Astrophysics Data System (ADS)

    Ye, Han-Yu; Yang, Li-Jun; Fu, Qing-Fei

    2016-10-01

    This paper investigates the spatial instability of a double-layer viscous liquid sheet moving in a stationary gas medium. A linear stability analysis is conducted and two situations are considered, an inviscid-gas situation and a viscous-gas situation. In the inviscid-gas situation, the basic state of the entire gas phase is stationary and the analytical dispersion relation is derived. Similar to single-layer sheets, the instability of double-layer sheets presents two unstable modes, the sinuous and the varicose modes. However, the result of the base-case double-layer sheet indicates that the cutoff wavenumber of the dispersion curve is larger than that of a single-layer sheet. A decomposition of the growth rate is performed and the result shows that for small wavenumbers, the surface tension of all three interfaces and the aerodynamic forces of both the lower and upper gases contribute significantly to the unstable growth rate. In contrast, for large wavenumbers the major contribution to the unstable growth rate is only the surface tension of the upper interface and the aerodynamic force of the upper gas. In the viscous-gas situation, although the majority of the gas phase is stationary, gas boundary layers exist at the vicinity of the moving liquid sheet, and the stability problem is solved by a spectral collocation method. Compared with the inviscid-gas solution, the growth rate at large wavenumber is significantly suppressed. The decomposition of growth rate indicates that all the aerodynamic and surface tension terms behave consistently throughout the entire unstable wavenumber range. The effects of various parameters are discussed. In addition, the effect of gas viscosity and the gas velocity profile is investigated separately, and the results indicate that both factors affect the maximum growth rate and the dominant wavenumber, although the effect of the gas velocity profile is stronger than that of the gas viscosity.

  6. Tunable magnetic resonance in double layered metallic structures.

    PubMed

    Zhou, L; Zhu, Y Y

    2011-12-01

    Double layered metallic gratings have been investigated both theoretically and experimentally. The authors have reported that tunable magnetic resonance (MR) can be achieved by modulating the vertical chirped width dh which could be controlled conveniently in the common electron and/or ion beam microfabrications. The linear relationship between MR wavelength and dh has been reported. By introducing the difference of electric and magnetic penetration depth, an analytic formula deduced from a modified LC model has shown good agreement with the simulation results, and an effective width for trapezoidal sandwiched microstructures has been presented. Our results may provide an alternative choice for tunable MR and broad bandwidth of magnetic metamaterials.

  7. Multi-ion Double Layers in a Magnetized Plasma

    NASA Astrophysics Data System (ADS)

    Shahmansouri, M.; Alinejad, H.; Tribeche, M.

    2015-11-01

    A theoretical investigation is carried out to study the existence, formation and basic properties of ion acoustic (IA) double layers (DLs) in a magnetized bi-ion plasma consisting of warm/cold ions and Boltzmann distributed electrons. Based on the reductive perturbation technique, an extended Korteweg de-Vries (KdV) equation is derived. The propagation of two possible modes (fast and slow), and their evolution are investigated. The effects of obliqueness, magnitude of the magnetic field, ion concentration, polarity of ions, and ion temperature on the IA DL profile are analyzed, and then the ranges of parameters for which the IA DLs exist are investigated in details.

  8. Observations of double layers in earth's plasma sheet.

    PubMed

    Ergun, R E; Andersson, L; Tao, J; Angelopoulos, V; Bonnell, J; McFadden, J P; Larson, D E; Eriksson, S; Johansson, T; Cully, C M; Newman, D N; Goldman, M V; Roux, A; LeContel, O; Glassmeier, K-H; Baumjohann, W

    2009-04-17

    We report the first direct observations of parallel electric fields (E_{ parallel}) carried by double layers (DLs) in the plasma sheet of Earth's magnetosphere. The DL observations, made by the THEMIS spacecraft, have E_{ parallel} signals that are analogous to those reported in the auroral region. DLs are observed during bursty bulk flow events, in the current sheet, and in plasma sheet boundary layer, all during periods of strong magnetic fluctuations. These observations imply that DLs are a universal process and that strongly nonlinear and kinetic behavior is intrinsic to Earth's plasma sheet.

  9. Langmuir probe measurements of double-layers in a pulsed discharge

    NASA Technical Reports Server (NTRS)

    Levine, J. S.; Crawford, F. W.

    1980-01-01

    Langmuir probe measurements were carried out which confirm the occurrence of double-layers in an argon positive column. Pulsing the discharge current permitted probe measurements to be performed in the presence of the double-layer. Supplementary evidence, obtained from DC and pulsed discharges, indicated that the double-layers formed in the two modes of operation were similar. The double-layers observed were weak and stable; their relation to other classes of double-layers are discussed, and directions for future work are suggested.

  10. Electrical Power Generation by Mechanically Modulating Electrical Double Layers

    NASA Astrophysics Data System (ADS)

    Pak, Hyuk Kyu; Moon, Jong Kyun

    2014-11-01

    Since Michael Faraday and Joseph Henry made their great discovery of electromagnetic induction, there have been continuous developments in electrical power generation. Most people today get electricity from thermal, hydroelectric, or nuclear power generation systems, which use this electromagnetic induction phenomenon. Here we propose a new method for electrical power generation, without using electromagnetic induction, by mechanically modulating the electrical double layers at the interfacial areas of a water bridge between two conducting plates. We find that when the height of the water bridge is mechanically modulated, the electrical double layer capacitors formed on the two interfacial areas are continuously charged and discharged at different phases from each other, thus generating an AC electric current across the plates. We use a resistor-capacitor circuit model to explain the results of this experiment. This observation could be useful for constructing a micro-fluidic power generation system and for understanding the interfacial charge distribution in solid-liquid interfaces in the near future. This work was supported by Center for Soft and Living Matter through IBS prgram in Korea.

  11. Effect of double layers on magnetosphere-ionosphere coupling

    NASA Technical Reports Server (NTRS)

    Lysak, Robert L.; Hudson, Mary K.

    1987-01-01

    The Earth's auroral zone contains dynamic processes occurring on scales from the length of an auroral zone field line which characterizes Alfven wave propagation to the scale of microscopic processes which occur over a few Debye lengths. These processes interact in a time-dependent fashion since the current carried by the Alfven waves can excite microscopic turbulence which can in turn provide dissipation of the Alfven wave energy. This review will first describe the dynamic aspects of auroral current structures with emphasis on consequences for models of microscopic turbulence. A number of models of microscopic turbulence will be introduced into a large-scale model of Alfven wave propagation to determine the effect of various models on the overall structure of auroral currents. In particular, the effects of a double layer electric field which scales with the plasma temperature and Debye length is compared with the effect of anomalous resistivity due to electrostatic ion cyclotron turbulence in which the electric field scales with the magnetic field strength. It is found that the double layer model is less diffusive than in the resistive model leading to the possibility of narrow, intense current structures.

  12. Double layers and double wells in arbitrary degenerate plasmas

    NASA Astrophysics Data System (ADS)

    Akbari-Moghanjoughi, M.

    2016-06-01

    Using the generalized hydrodynamic model, the possibility of variety of large amplitude nonlinear excitations is examined in electron-ion plasma with arbitrary electron degeneracy considering also the ion temperature effect. A new energy-density relation is proposed for plasmas with arbitrary electron degeneracy which reduces to the classical Boltzmann and quantum Thomas-Fermi counterparts in the extreme limits. The pseudopotential method is employed to find the criteria for existence of nonlinear structures such as solitons, periodic nonlinear structures, and double-layers for different cases of adiabatic and isothermal ion fluids for a whole range of normalized electron chemical potential, η0, ranging from dilute classical to completely degenerate electron fluids. It is observed that there is a Mach-speed gap in which no large amplitude localized or periodic nonlinear excitations can propagate in the plasma under consideration. It is further revealed that the plasma under investigation supports propagation of double-wells and double-layers the chemical potential and Mach number ranges of which are studied in terms of other plasma parameters. The Mach number criteria for nonlinear waves are shown to significantly differ for cases of classical with η0 < 0 and quantum with η0 > 0 regimes. It is also shown that the localized structure propagation criteria possess significant dissimilarities for plasmas with adiabatic and isothermal ions. Current research may be generalized to study the nonlinear structures in plasma containing positrons, multiple ions with different charge states, and charged dust grains.

  13. Performance of electric double layer capacitors with polymer gel electrolytes

    SciTech Connect

    Ishikawa, Masashi; Kishino, Takahiro; Katada, Naoji; Morita, Masayuki

    2000-07-01

    Polymer gel electrolytes consisting of poly(vinylidene fluoride) (PVdF), tetraethylammonium tetrafluoroborate (TEABF{sub 4}), and propylene carbonate (PC) as a plasticizer have been investigated for electric double layer capacitors. The PVdF gel electrolytes showed high ionic conductivity (ca. 6 mS/cm at 298 K). To assemble model capacitors with the PVdF gel electrolytes and activated carbon fiber cloth electrodes, a pair of the fixed electrodes was soaked in a precursor solution containing PC, PVdF, and TEABF{sub 4}, followed by evaporation of the PC solvent in a vacuum oven. The resulting gel electrolytes were in good contact with the electrodes. The model capacitors with the PVdF gel electrolytes showed a large value of capacitance and high coulombic efficiency in operation voltage ranges of 1--2 and 1--3 V. It is worth noting that the capacitors with the PVdF electrolytes showed long voltage retention in a self-discharge test. These good characteristics of the gel capacitors were comparable to those of typical double layer capacitors with a liquid organic electrolyte containing PC and TEABF{sub 4}; rather, the voltage retentivity of the PVdF gel capacitors was much superior to that of the capacitors with the organic electrolyte.

  14. SUPPRESSION OF ENERGETIC ELECTRON TRANSPORT IN FLARES BY DOUBLE LAYERS

    SciTech Connect

    Li, T. C.; Drake, J. F.; Swisdak, M.

    2012-09-20

    During flares and coronal mass ejections, energetic electrons from coronal sources typically have very long lifetimes compared to the transit times across the systems, suggesting confinement in the source region. Particle-in-cell simulations are carried out to explore the mechanisms of energetic electron transport from the corona to the chromosphere and possible confinement. We set up an initial system of pre-accelerated hot electrons in contact with ambient cold electrons along the local magnetic field and let it evolve over time. Suppression of transport by a nonlinear, highly localized electrostatic electric field (in the form of a double layer) is observed after a short phase of free-streaming by hot electrons. The double layer (DL) emerges at the contact of the two electron populations. It is driven by an ion-electron streaming instability due to the drift of the back-streaming return current electrons interacting with the ions. The DL grows over time and supports a significant drop in temperature and hence reduces heat flux between the two regions that is sustained for the duration of the simulation. This study shows that transport suppression begins when the energetic electrons start to propagate away from a coronal acceleration site. It also implies confinement of energetic electrons with kinetic energies less than the electrostatic energy of the DL for the DL lifetime, which is much longer than the electron transit time through the source region.

  15. Low Temperature Research in Microgravity

    NASA Technical Reports Server (NTRS)

    Strayer, D.

    1993-01-01

    The recent flight of the Lambda Point Experiment has demonstrated the potential for performing precise tests of fundamental theories using low temperature techniques in Earth orbit. NASA's Microgravity Science and Applications Division has established a program of successor expermients to investigate other aspects of condensed matter physics using the same low temperature flight facility. This paper describes the new investigations that have been chosen for flight experiments, and those selected for ground-based studies that could lead to flight experiments later.

  16. Sensors for low temperature application

    DOEpatents

    Henderson, Timothy M.; Wuttke, Gilbert H.

    1977-01-01

    A method and apparatus for low temperature sensing which uses gas filled micro-size hollow glass spheres that are exposed in a confined observation area to a low temperature range (Kelvin) and observed microscopically to determine change of state, i.e., change from gaseous state of the contained gas to condensed state. By suitable indicia and classification of the spheres in the observation area, the temperature can be determined very accurately.

  17. Ion-acoustic solitons and double layers in a two-electron temperature plasma with hot isothermal electrons and cold ions

    NASA Astrophysics Data System (ADS)

    Tagare, S. G.

    2000-03-01

    It is found that a two-electron temperature plasma with isothermal electrons and cold ions admits both compressive and rarefactive solitons, as well as compressive and rarefactive double layers (depending on the concentration of low-temperature electrons). In this paper, a Korteweg-de Vries (K-dV) equation and a K-dV-type equation with cubic and fourth-order nonlinearity at the critical density of the low-temperature isothermal electrons are derived to discuss the properties of ion-acoustic solitons in a two-electron temperature plasma. In the vicinity of the critical electron density of low-temperature isothermal electrons, we have derived a K-dV-type equation with mixed nonlinearity, and the solution of this equation will have both compressive and rarefactive double layers for those values of critical electron density of low-temperature electrons for which ion-acoustic solitons do not exist. By using quasipotential analysis, critical Mach numbers M1c and M2c are obtained such that compressive ion-acoustic solitons exist when 1

  18. Gas flows through double-layer membrane of thermomolecular pump

    NASA Astrophysics Data System (ADS)

    Oscar, Friedlander; Yuriy, Nikolskiy; Ivan, Voronich

    2014-12-01

    The results of numerical and experimental modeling of the flows in double-layer permeable membranes are presented. One of the layers, the thick one, is the supporting layer in which the perforation diameter is larger than that in the thin layer. Across one or both layers the temperature differences were created. The calculations of the flows inside the perforated channels and additional drag of the channels in the membrane thick layer were carried out with the Stokes equations and with the kinetic boundary conditions across the membrane thin layer. In the experimental research of the thermomolecular pressure difference the thermoelectric effect (the Peltier effect) was used for creating the temperature difference between the membrane layer surfaces.

  19. Buckling instability of circular double-layered graphene sheets.

    PubMed

    Natsuki, Toshiaki; Shi, Jin-Xing; Ni, Qing-Qing

    2012-04-04

    In this paper, we study the buckling properties of circular double-layered graphene sheets (DLGSs), using plate theory. The two graphene layers are modeled as two individual sheets whose interactions are determined by the Lennard-Jones potential of the carbon-carbon bond. An analytical solution of coupled governing equations is proposed for predicting the buckling properties of circular DLGSs. Using the present theoretical approach, the influences of boundary conditions, plate sizes, and buckling-mode shapes on the buckling behaviors are investigated in detail. The buckling stability is significantly affected by the buckling-mode shapes. As a result of van der Waals interactions, the buckling stress of circular DLGSs is much larger for the anti-phase mode than for the in-phase mode.

  20. Carbon additives for electrical double layer capacitor electrodes

    NASA Astrophysics Data System (ADS)

    Weingarth, D.; Cericola, D.; Mornaghini, F. C. F.; Hucke, T.; Kötz, R.

    2014-11-01

    Electrochemical double layer capacitors (EDLCs) are inherently high power devices when compared to rechargeable batteries. While capacitance and energy storage ability are mainly increased by optimizing the electrode active material or the electrolyte, the power capability could be improved by including conductive additives in the electrode formulations. This publication deals with the use of four different carbon additives - two carbon blacks and two graphites - in standard activated carbon based EDLC electrodes. The investigations include: (i) physical characterization of carbon powder mixtures such as surface area, press density, and electrical resistivity measurements, and (ii), electrochemical characterization via impedance spectroscopy and cyclic voltammetry of full cells made with electrodes containing 5 wt.% of carbon additive and compared to cells made with pure activated carbon electrodes in organic electrolyte. Improved cell performance was observed in both impedance and cyclic voltammetry responses. The results are discussed considering the main characteristics of the different carbon additives, and important considerations about electrode structure and processability are drawn.

  1. Limiting factors for carbon based chemical double layer capacitors

    NASA Technical Reports Server (NTRS)

    Rose, M. Frank; Johnson, C.; Owens, T.; Stevens, B.

    1993-01-01

    The Chemical Double Layer (CDL) capacitor improves energy storage density dramatically when compared with conventional electrolytic capacitors. When compared to batteries, the CDL Capacitor is much less energy dense; however, the power density is orders of magnitude better. As a result, CDL-battery combinations present an interesting pulse power system with many potential applications. Due to the nature of the CDL it is inherently a low voltage device. The applications of the CDL can be tailored to auxiliary energy and burst mode storages which require fast charge/discharge cycles. Typical of the applications envisioned are power system backup, directed energy weapons concepts, electric automobiles, and electric actuators. In this paper, we will discuss some of the general characteristics of carbon-based CDL technology describing the structure, performance parameters, and methods of construction. Further, analytical and experimental results which define the state of the art are presented and described in terms of impact on applications.

  2. A novel vibrational energy harvester with electric double layer electrets

    NASA Astrophysics Data System (ADS)

    Ono, S.; Miwa, K.; Iori, J.; Mitsuya, H.; Ishibashi, K.; Sano, C.; Toshiyoshi, H.; Fujita, H.

    2016-11-01

    We propose a new type of vibrational energy harvester with an electric double layer (EDL) electrets. Instead of using any external bias-voltage source or dielectric layer on top of the metal electrode to sustain EDL, we succeed to anchor the ions to polymer network to form the EDL electrets. By changing contact area between the EDL electrets and the electrode, large electric current is generated in the circuit. Owing to extremely large capacitance of the EDL electret, vibrational energy harvesters have the unique capability to leverage the high- density charge accumulation to the electrode and obtained current density becomes as high as 200 μA/cm2 with output voltage of 1V even with low frequency vibrations as low as 1 Hz.

  3. "Thermal Charging" Phenomenon in Electrical Double Layer Capacitors.

    PubMed

    Wang, Jianjian; Feng, Shien-Ping; Yang, Yuan; Hau, Nga Yu; Munro, Mary; Ferreira-Yang, Emerald; Chen, Gang

    2015-09-09

    Electrical double layer capacitors (EDLCs) are usually charged by applying a potential difference across the positive and negative electrodes. In this paper, we demonstrated that EDLCs can be charged by heating. An open circuit voltage of 80-300 mV has been observed by heating the supercapacitor to 65 °C. The charge generated at high temperature can be stored in the device after its returning to the room temperature, thus allowing the lighting up of LEDs by connecting the "thermally charged" supercapacitors in a series. The underlying mechanism is related to a thermo-electrochemical process that enhances the kinetics of Faradaic process at the electrode surface (e.g., surface redox reaction of functional group, or chemical adsorption/desorption of electrolyte ions) at higher temperature. Effects of "thermal charging" times, activation voltage, rate, and times on "thermally charged" voltage are studied and possible mechanisms are discussed.

  4. Some dynamical properties of very strong double layers in a triple plasma device

    NASA Technical Reports Server (NTRS)

    Carpenter, T.; Torven, S.

    1987-01-01

    Dynamical properties of very strong double layers seen in a differentially pumped triple plasma device are reported. These double layers are V-shaped. The following findings are discussed: (1) Disruptions in the double layer potential and in the plasma current occur when an inductance is placed in series with the bias supply between the sources in the external circuit. These disruptions, which can be highly periodic, are the result of a negative resistance region. (2) When reactances in the circuit are minimized, the double layer exhibits a jitter motion in position approximately equal to the double layer thickness. (3) When the bias between the sources is rapidly turned on, the initial phase in the double layer formation is the occurrence of a constant electric field for the first few microseconds. First the apparatus used in all of the work is discussed and then each of the three phenomena are considered.

  5. Low temperature cross linking polyimides

    NASA Technical Reports Server (NTRS)

    Serafini, T. T.; Delvigs, P. (Inventor)

    1982-01-01

    A polyimide is formed by cross linking a prepolymer formed by reacting a polyfunctional ester, a polyfunctional amine, and an end-capping unit. By providing an end-capping unit, the prepolymer is curable at a relatively low temperature of about 175 to 245 C.

  6. Catalysts for low temperature oxidation

    DOEpatents

    Toops, Todd J.; Parks, III, James E.; Bauer, John C.

    2016-03-01

    The invention provides a composite catalyst containing a first component and a second component. The first component contains nanosized gold particles. The second component contains nanosized platinum group metals. The composite catalyst is useful for catalyzing the oxidation of carbon monoxide, hydrocarbons, oxides of nitrogen, and other pollutants at low temperatures.

  7. Low-temperature magnetic refrigerator

    DOEpatents

    Barclay, J.A.

    1983-05-26

    The invention relates to magnetic refrigeration and more particularly to low temperature refrigeration between about 4 and about 20 K, with an apparatus and method utilizing a belt of magnetic material passed in and out of a magnetic field with heat exchangers within and outside the field operably disposed to accomplish refrigeration.

  8. Low-temperature magnetic refrigerator

    DOEpatents

    Barclay, John A.

    1985-01-01

    The disclosure is directed to a low temperature 4 to 20 K. refrigeration apparatus and method utilizing a ring of magnetic material moving through a magnetic field. Heat exchange is accomplished in and out of the magnetic field to appropriately utilize the device to execute Carnot and Stirling cycles.

  9. Dust-acoustic solitary waves and double layers in dusty plasma consisting of cold dust particles and two-temperature isothermal ions

    NASA Astrophysics Data System (ADS)

    Tagare, S. G.

    1997-09-01

    It is found that a dusty plasma with inertial dust fluid and two-temperature isothermal ions admits both compressive and rarefactive solitary waves, as well as compressive and rarefactive double layers (depending on the concentration of low-temperature ions). In this paper, Korteweg-de Vries equation (KdV-type equations) with cubic and fourth-order nonlinearity at the critical density of low-temperature isothermal ions are derived to discuss properties of dust-acoustic solitary waves. In the vicinity of critical density of low-temperature ions, KdV-type equation with mixed nonlinearity is discussed. By using quasipotential analysis, critical Mach numbers M1c and M2c are obtained such that rarefactive dust-acoustic solitons exist when 1

  10. Electrochemical double-layer capacitors based on functionalized graphene

    NASA Astrophysics Data System (ADS)

    Pope, Michael Allan

    Graphene is a promising electrode material for electrochemical double-layer capacitors (EDLCs) used for energy storage due to its high electrical conductivity and theoretical specific surface area. However, the intrinsic capacitance of graphene is known to be low and governed by the electronic side of the interface. Furthermore, graphene tends to aggregate and stack together when processed into thick electrode films. This significantly lowers the ion-accessible specific surface area (SSA). Maximizing both the SSA and the intrinsic capacitance are the main problems addressed in this thesis in an effort to improve the specific capacitance and energy density of EDLCs. In contrast to pristine graphene, functionalized graphene produced by the thermal exfoliation of graphite oxide contains residual functional groups and lattice defects. To study how these properties affect the double-layer capacitance, a model electrode system capable of measuring the intrinsic electrochemical properties of functionalized graphene was developed. To prevent artifacts and uncertainties related to measurements on porous electrodes, the functionalized graphene sheets (FGSs) were assembled as densely tiled monolayers using a Langmuir-Blodgett technique. In this way, charging can be studied in a well-defined 2D geometry. The possibility of measuring and isolating the intrinsic electrochemical properties of FGS monolayers was first demonstrated by comparing capacitance and redox probe measurements carried out on coatings deposited on passivated gold and single crystal graphite substrates. This monolayer system was then used to follow the double-layer capacitance of the FGS/electrolyte interface as the structure and chemistry of graphene was varied by thermal treatments ranging from 300 °C to 2100 °C. Elemental analysis and Raman spectroscopy were used to determine the resulting chemical and structural transformation upon heat treatment. It was demonstrated that intrinsically defective

  11. Structure and dynamics of electrical double layers in organic electrolytes

    SciTech Connect

    Huang, Jingsong; Sumpter, Bobby G; Meunier, Vincent; Qiao, Rui; Feng, Guang

    2010-01-01

    The organic electrolyte of tetraethylammonium tetrafluoroborate (TEABF{sub 4}) in the aprotic solvent of acetonitrile (ACN) is widely used in electrochemical systems such as electrochemical capacitors. In this paper, we examine the solvation of TEA{sup +} and BF{sub 4}{sup -} in ACN, and the structure, capacitance, and dynamics of the electrical double layers (EDLs) in the TEABF{sub 4}-ACN electrolyte using molecular dynamics simulations complemented with quantum density functional theory calculations. The solvation of TEA+ and BF4- ions is found to be much weaker than that of small inorganic ions in aqueous solutions, and the ACN molecules in the solvation shell of both types of ions show only weak packing and orientational ordering. These solvation characteristics are caused by the large size, charge delocalization, and irregular shape (in the case of TEA+ cation) of the ions. Near neutral electrodes, the double-layer structure in the organic electrolyte exhibits a rich organization: the solvent shows strong layering and orientational ordering, ions are significantly contact-adsorbed on the electrode, and alternating layers of cations/anions penetrate ca. 1.1 nm into the bulk electrolyte. The significant contact adsorption of ions and the alternating layering of cation/anion are new features found for EDLs in organic electrolytes. These features essentially originate from the fact that van der Waals interactions between organic ions and the electrode are strong and the partial desolvation of these ions occurs easily, as a result of the large size of the organic ions. Near charged electrodes, distinct counter-ion concentration peaks form, and the ion distribution cannot be described by the Helmholtz model or the Helmholtz + Poisson-Boltzmann model. This is because the number of counter-ions adsorbed on the electrode exceeds the number of electrons on the electrode, and the electrode is over-screened in parts of the EDL. The computed capacitances of the EDLs are in

  12. Structure and dynamics of electrical double layers in organic electrolytes.

    PubMed

    Feng, Guang; Huang, Jingsong; Sumpter, Bobby G; Meunier, Vincent; Qiao, Rui

    2010-01-01

    The organic electrolyte of tetraethylammonium tetrafluoroborate (TEABF(4)) in the aprotic solvent of acetonitrile (ACN) is widely used in electrochemical systems such as electrochemical capacitors. In this paper, we examine the solvation of TEA(+) and BF(4)(-) in ACN, and the structure, capacitance, and dynamics of the electrical double layers (EDLs) in the TEABF(4-)ACN electrolyte using molecular dynamics simulations complemented with quantum density functional theory calculations. The solvation of TEA(+) and BF(4)(-) ions is found to be much weaker than that of small inorganic ions in aqueous solutions, and the ACN molecules in the solvation shell of both types of ions show only weak packing and orientational ordering. These solvation characteristics are caused by the large size, charge delocalization, and irregular shape (in the case of TEA(+) cation) of the ions. Near neutral electrodes, the double-layer structure in the organic electrolyte exhibits a rich organization: the solvent shows strong layering and orientational ordering, ions are significantly contact-adsorbed on the electrode, and alternating layers of cations/anions penetrate ca. 1.1 nm into the bulk electrolyte. The significant contact adsorption of ions and the alternating layering of cation/anion are new features found for EDLs in organic electrolytes. These features essentially originate from the fact that van der Waals interactions between organic ions and the electrode are strong and the partial desolvation of these ions occurs easily, as a result of the large size of the organic ions. Near charged electrodes, distinct counter-ion concentration peaks form, and the ion distribution cannot be described by the Helmholtz model or the Helmholtz + Poisson-Boltzmann model. This is because the number of counter-ions adsorbed on the electrode exceeds the number of electrons on the electrode, and the electrode is over-screened in parts of the EDL. The computed capacitances of the EDLs are in good

  13. Low temperature selective absorber research

    NASA Astrophysics Data System (ADS)

    Herzenberg, S. A.; Silberglitt, R.

    1982-04-01

    Research carried out since 1979 on selective absorbers is surveyed, with particular attention given to the low-temperature coatings seen as promising for flat plate and evacuated tube applications. The most thoroughly investigated absorber is black chrome, which is highly selective and is the most durable low-temperature absorber. It is believed that other materials, because of their low cost and lower content of strategic materials, may eventually supplant black chrome. Among these candidates are chemically converted black nickel; anodically oxidized nickel, zinc, and copper composites; and nickel or other low-cost multilayer coatings. In reviewing medium and high-temperature research, black chrome, multilayer coatings and black cobalt are seen as best medium-temperature candidates. For high temperatures, an Al2O3/Pt-Al203 multilayer composite or the zirconium diboride coating is preferred.

  14. Fast charging self-powered electric double layer capacitor

    NASA Astrophysics Data System (ADS)

    Parida, Kaushik; Bhavanasi, Venkateswarlu; Kumar, Vipin; Wang, Jiangxin; Lee, Pooi See

    2017-02-01

    Self-powered electrochemical energy storage devices, which store energy upon application of mechanical force, have emerged as a promising technology for the realization of autonomous systems for maintenance-free, independent and multifunctional operations. However, the existing state-of-the-art technology demonstrates slow self-charging due to slow Faradaic reactions and intercalation mechanism. Here, we report a fast self-charging, self-powered electrochemical energy storage device owing to the formation of an electric double layer with fast adsorption and desorption of ions at the carbon nanotube (CNT) electrode upon application of mechanical force. The device charges up to 70 mV from the open-circuit potential, storing a capacitance of 95 μFcm-2 upon application of a mechanical pressure of 70 N at a frequency of 5 Hz. More importantly, it takes less than 10 s to achieve 90% of the increment in the potential (60 mV), which is more than one order of magnitude faster than all of the previously reported self-powered energy storage devices.

  15. Stable electrolyte for high voltage electrochemical double-layer capacitors

    SciTech Connect

    Ruther, Rose E.; Sun, Che -Nan; Holliday, Adam; Cheng, Shiwang; Delnick, Frank M.; Zawodzinski, Thomas A.; Nanda, Jagjit

    2016-12-28

    A simple electrolyte consisting of NaPF6 salt in 1,2-dimethoxyethane (DME) can extend the voltage window of electric double-layer capacitors (EDLCs) to >3.5 V. DME does not passivate carbon electrodes at very negative potentials (near Na/Na+), extending the practical voltage window by about 1.0 V compared to standard, non-aqueous electrolytes based on acetonitrile. The voltage window is demonstrated in two- and three-electrode cells using a combination of electrochemical impedance spectroscopy (EIS), charge-discharge cycling, and measurements of leakage current. DME-based electrolytes cannot match the high conductivity of acetonitrile solutions, but they can satisfy applications that demand high energy density at moderate power. The conductivity of NaPF6 in DME is comparable to commercial lithium-ion battery electrolytes and superior to most ionic liquids. Lastly, factors that limit the voltage window and EDLC energy density are discussed, and strategies to further boost energy density are proposed.

  16. Field-Induced Superconductivity in Electric Double Layer Transistors

    NASA Astrophysics Data System (ADS)

    Ueno, Kazunori; Shimotani, Hidekazu; Yuan, Hongtao; Ye, Jianting; Kawasaki, Masashi; Iwasa, Yoshihiro

    2014-03-01

    Electric field tuning of superconductivity has been a long-standing issue in solid state physics since the invention of the field-effect transistor (FET) in 1960. Owing to limited available carrier density in conventional FET devices, electric-field-induced superconductivity was believed to be possible in principle but impossible in practice. However, in the past several years, this limitation has been overcome by the introduction of an electrochemical concept, and electric-field-induced superconductivity has been realized. In the electric double layer (EDL) formed at the electrochemical interfaces, an extremely high electric field is generated and hence high-density charge carriers sufficient to induce superconductivity exist and are collectively used as a charge accumulation device known as an EDL capacitor. Field-induced superconductivity has been used to establish the relationship between Tc and carrier density and can now be used to search for new superconductors. Here, we review electric-field-induced superconductivity using an FET device, with a particular focus on the latest advances in EDL transistors.

  17. Lubrication approximation in completed double layer boundary element method

    NASA Astrophysics Data System (ADS)

    Nasseri, S.; Phan-Thien, N.; Fan, X.-J.

    This paper reports on the results of the numerical simulation of the motion of solid spherical particles in shear Stokes flows. Using the completed double layer boundary element method (CDLBEM) via distributed computing under Parallel Virtual Machine (PVM), the effective viscosity of suspension has been calculated for a finite number of spheres in a cubic array, or in a random configuration. In the simulation presented here, the short range interactions via lubrication forces are also taken into account, via the range completer in the formulation, whenever the gap between two neighbouring particles is closer than a critical gap. The results for particles in a simple cubic array agree with the results of Nunan and Keller (1984) and Stoksian Dynamics of Brady etal. (1988). To evaluate the lubrication forces between particles in a random configuration, a critical gap of 0.2 of particle's radius is suggested and the results are tested against the experimental data of Thomas (1965) and empirical equation of Krieger-Dougherty (Krieger, 1972). Finally, the quasi-steady trajectories are obtained for time-varying configuration of 125 particles.

  18. Plasmons in spatially separated double-layer graphene nanoribbons

    NASA Astrophysics Data System (ADS)

    Bagheri, Mehran; Bahrami, Mousa

    2014-05-01

    Motivated by innovative progresses in designing multi-layer graphene nanostructured materials in the laboratory, we theoretically investigate the Dirac plasmon modes of a spatially separated double-layer graphene nanoribbon system, made up of a vertically offset armchair and metallic graphene nanoribbon pair. We find striking features of the collective excitations in this novel Coulomb correlated system, where both nanoribbons are supposed to be either intrinsic (undoped/ungated) or extrinsic (doped/gated). In the former, it is shown the low-energy acoustical and the high-energy optical plasmon modes are tunable only by the inter-ribbon charge separation. In the later, the aforementioned plasmon branches are modified by the added doping factor. As a result, our model could be useful to examine the existence of a linear Landau-undamped low-energy acoustical plasmon mode tuned via the inter-ribbon charge separation as well as doping. This study might also be utilized for devising novel quantum optical waveguides based on the Coulomb coupled graphene nanoribbons.

  19. Dislocated double-layer metal gratings: an efficient unidirectional coupler.

    PubMed

    Liu, Tianran; Shen, Yang; Shin, Wonseok; Zhu, Qiangzhong; Fan, Shanhui; Jin, Chongjun

    2014-07-09

    We propose theoretically and demonstrate experimentally a dislocated double-layer metal grating structure, which operates as a unidirectional coupler capable of launching surface plasmon polaritons in a desired direction under normal illumination. The structure consists of a slanted dielectric grating sandwiched between two gold gratings. The upper gold grating has a nonzero lateral relative displacement with respect to the lower one. Numerical simulations show that a grating structure with 7 periods can convert 49% of normally incident light into surface plasmons with a contrast ratio of 78 between the powers of the surface plasmons launched in two opposite directions. We explain the unidirectional coupling phenomenon by the dislocation-induced interference of the diffracted waves from the upper and lower gold gratings. Furthermore, we developed a simple and cost-effective technique to fabricate the structure via tilted two-beam interference lithography and subsequent shadow deposition of gold. The experimental results demonstrate a coupling efficiency of 36% and a contrast ratio of 43. The relatively simple periodic nature of our structure lends itself to large-scale low-cost fabrication and simple theoretical analysis. Also, unlike the previous unidirectional couplers based on aperiodic structures, the design parameters of our unidirectional coupler can be determined analytically. Therefore, this structure can be an important component for surface-plasmon-based nanophotonic circuits by providing an efficient interface between free-space and surface plasmon waves.

  20. Plasmons in spatially separated double-layer graphene nanoribbons

    SciTech Connect

    Bagheri, Mehran; Bahrami, Mousa

    2014-05-07

    Motivated by innovative progresses in designing multi-layer graphene nanostructured materials in the laboratory, we theoretically investigate the Dirac plasmon modes of a spatially separated double-layer graphene nanoribbon system, made up of a vertically offset armchair and metallic graphene nanoribbon pair. We find striking features of the collective excitations in this novel Coulomb correlated system, where both nanoribbons are supposed to be either intrinsic (undoped/ungated) or extrinsic (doped/gated). In the former, it is shown the low-energy acoustical and the high-energy optical plasmon modes are tunable only by the inter-ribbon charge separation. In the later, the aforementioned plasmon branches are modified by the added doping factor. As a result, our model could be useful to examine the existence of a linear Landau-undamped low-energy acoustical plasmon mode tuned via the inter-ribbon charge separation as well as doping. This study might also be utilized for devising novel quantum optical waveguides based on the Coulomb coupled graphene nanoribbons.

  1. Stable electrolyte for high voltage electrochemical double-layer capacitors

    DOE PAGES

    Ruther, Rose E.; Sun, Che -Nan; Holliday, Adam; ...

    2016-12-28

    A simple electrolyte consisting of NaPF6 salt in 1,2-dimethoxyethane (DME) can extend the voltage window of electric double-layer capacitors (EDLCs) to >3.5 V. DME does not passivate carbon electrodes at very negative potentials (near Na/Na+), extending the practical voltage window by about 1.0 V compared to standard, non-aqueous electrolytes based on acetonitrile. The voltage window is demonstrated in two- and three-electrode cells using a combination of electrochemical impedance spectroscopy (EIS), charge-discharge cycling, and measurements of leakage current. DME-based electrolytes cannot match the high conductivity of acetonitrile solutions, but they can satisfy applications that demand high energy density at moderate power.more » The conductivity of NaPF6 in DME is comparable to commercial lithium-ion battery electrolytes and superior to most ionic liquids. Lastly, factors that limit the voltage window and EDLC energy density are discussed, and strategies to further boost energy density are proposed.« less

  2. Junction conditions in quadratic gravity: thin shells and double layers

    NASA Astrophysics Data System (ADS)

    Reina, Borja; Senovilla, José M. M.; Vera, Raül

    2016-05-01

    The junction conditions for the most general gravitational theory with a Lagrangian containing terms quadratic in the curvature are derived. We include the cases with a possible concentration of matter on the joining hypersurface—termed as thin shells, domain walls or braneworlds in the literature—as well as the proper matching conditions where only finite jumps of the energy-momentum tensor are allowed. In the latter case we prove that the matching conditions are more demanding than in general relativity. In the former case, we show that generically the shells/domain walls are of a new kind because they possess, in addition to the standard energy-momentum tensor, a double layer energy-momentum contribution which actually induces an external energy flux vector and an external scalar pressure/tension on the shell. We prove that all these contributions are necessary to make the entire energy-momentum tensor divergence-free, and we present the field equations satisfied by these energy-momentum quantities. The consequences of all these results are briefly analyzed.

  3. On The Physical Mechanism At The Origin Of Multiple Double Layers Appearance In Plasma

    SciTech Connect

    Dimitriu, D. G.; Gurlui, S.; Aflori, M.; Ivan, L. M.

    2006-01-15

    Double layer in plasma are nonlinear potential structures consisting of two adjacent layers of positive and negative space charges, respectively. Between these layers a potential jump exists, creating an electric field. A common way to obtain a double layer structure is to positively bias an electrode immersed into stable plasma. Under certain experimental conditions, a more complex structure in form of two or more subsequent double layers was observed, which was called multiple double layers. It appears as several bright and concentric plasma shells attached to the electrode. The successive double layers are located at the abrupt changes of luminosity between two adjacent plasma shells. However, if the electrode is large, the multiple double layers structure appears non-concentrically, as a network of plasma spots, near each other, almost equally distributed on the electrode surface. Each of the plasma spots is confined by an electrical double layer. Here, we will present experimental results on the appearance and dynamics of concentric, as well as non-concentric multiple double layers. The results prove that the same physical mechanism is at the origin of their appearance in plasma. In this mechanism, the electron-neutral impact excitations and ionizations play the key role.

  4. Dynamical features and electric field strengths of double layers driven by currents. [in auroras

    NASA Technical Reports Server (NTRS)

    Singh, N.; Thiemann, H.; Schunk, R. W.

    1985-01-01

    In recent years, a number of papers have been concerned with 'ion-acoustic' double layers. In the present investigation, results from numerical simulations are presented to show that the shapes and forms of current-driven double layers evolve dynamically with the fluctuations in the current through the plasma. It is shown that double layers with a potential dip can form even without the excitation of ion-acoustic modes. Double layers in two-and one-half-dimensional simulations are discussed, taking into account the simulation technique, the spatial and temporal features of plasma, and the dynamical behavior of the parallel potential distribution. Attention is also given to double layers in one-dimensional simulations, and electrical field strengths predicted by two-and one-half-dimensional simulations.

  5. Weak dust-acoustic double-layers in a polarized dusty plasma

    NASA Astrophysics Data System (ADS)

    Messekher, Abderrahim; Tribeche, Mouloud

    2017-03-01

    The problem of small amplitude dust-acoustic double-layers in a polarized dusty plasma is addressed. Our results show that in such a plasma double-layers structures, the amplitude and nature of which depend sensitively on the plasma parameters, can exist. In particular, it may be noted that as the polarization parameter R increases, the domain of the allowable Mach numbers M enlarges and small values of M are more involved. An increase of R leads to a monotonic decrease of the dust-acoustic double-layers amplitude before levelling-off at a constant value. An increase of M provides qualitatively the same results by with a net shift of the R-values towards lower values. We have then investigated the threshold R_{cr} for the possible onset of rarefactive dust-acoustic double-layers and concluded that only compressive double-layers are admitted.

  6. Development of high energy density electrical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Devarajan, Thamarai selvi

    Electrochemical Double Layer capacitors (EDLCs) have shown themselves as a viable energy storage alternative. EDLCs have high power density, faster charge/discharge, wide operating temperature and long cycle life compared to batteries since it stores charge by physical separation. Despites all their advantages, their low energy density stand as a bottleneck for capacitors. This research aims to increase the energy density of EDLC without compromising the power density. Energy is proportional to the square of cell voltage. Cell voltage is mainly dependent on electrolyte breakdown. Electrolytes also provide ions for charge separation and conduction. Therefore various electrolytes (Solutes and Solvents) which can give high concentration, solubility and decomposition potential were characterized in the first part of the research. In that study, a novel ionic liquid OPBF4 had higher capacitance and comparable voltage window compared to commercial TEABF4 in Acetonitrile. However, the increased polarity of the fixed ring O-atom and the ion-ion interaction in OPBF4 was responsible for lowering its conductivity. Oxygenated ionic compounds with alkyl groups had lower stability due to beta elimination between two electron withdrawing atoms. Volume based thermodynamics and quantum chemical calculations were used to calculate ion size, HOMO/LUMO energies, and free energy changes and establish relationship with capacitance, redox potential and melting points respectively. In addition free energy of fusion was used to predict the melting point. Ion size had correlation with capacitance due to compact double layer formation. Free energy changes did not explain the differences in melting point and predicted dielectric constant was inconsistent with the polarity. This is presumably due to using Van der Waals volume instead of crystal structure volume and insufficient incorporation of polarization term. The HOMO/LUMO energies gave direct relation between oxidation and reduction

  7. Relativistic Sommerfeld Low Temperature Expansion

    NASA Astrophysics Data System (ADS)

    Lourenço, O.; Dutra, M.; Delfino, A.; Sá Martins, J. S.

    We derive a relativistic Sommerfeld expansion for thermodynamic quantities in many-body fermionic systems. The expansion is used to generate the equation of state of the Walecka model and its isotherms. We find that these results are in good agreement with numerical calculations, even when the expansion is truncated at its lowest order, in the low temperature regime, defined by T/xf ≪ 1. Although the interesting region near the liquid-gas phase transition is excluded by this criterion, the expansion may still find usefulness in the study of very cold nuclear matter systems, such as neutron stars.

  8. Energy distribution of elastically scattered electrons from double layer samples

    NASA Astrophysics Data System (ADS)

    Tőkési, K.; Varga, D.

    2016-02-01

    We present a theoretical description of the spectra of electrons elastically scattered from thin double layered Au-C samples. The analysis is based on the Monte Carlo simulation of the recoil and Doppler effects in reflection and transmission geometries of the scattering at a fixed angle of 44.3 ° and a primary energy of 40 keV. The relativistic correction is taken into account. Besides the experimentally measurable energy distributions the simulations give many partial distributions separately, depending on the number of elastic scatterings (single, and multiple scatterings of different types). Furthermore, we present detailed analytical calculations for the main parameters of the single scattering, taking into account both the ideal scattering geometry, i.e. infinitesimally small angular range, and the effect of the real, finite angular range used in the measurements. We show our results for intensity ratios, peak shifts and broadenings for four cases of measurement geometries and layer thicknesses. While in the peak intensity ratios of gold and carbon for transmission geometries were found to be in good agreement with the results of the single scattering model, especially large deviations were obtained in reflection geometries. The separation of the peaks, depending on the geometry and the thickness, generally smaller, and the peak width generally larger than it can be expected from the nominal values of the primary energy, scattering angle, and mean kinetic energy of the atoms. We also show that the peaks are asymmetric even for the case of the single scattering due to the finite solid angle. Finally, we present a qualitative comparison with the experimental data. We find our resulting energy distribution of elastically scattered electrons to be in good agreement with recent measurements.

  9. The Importance of Ion Size and Electrode Curvature on Electrical Double Layers in Ionic Liquids

    SciTech Connect

    Feng, Guang; Qiao, Rui; Huang, Jingsong; Dai, Sheng; Sumpter, Bobby G; Meunier, Vincent

    2010-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF(6)] (near the positive electrode) {approx} [BMIM][Cl] (near the negative electrode) {approx} [BMIM][PF(6)] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a 'Multiple Ion Layers with Overscreening' (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  10. The importance of ion size and electrode curvature on electrical double layers in ionic liquids

    SciTech Connect

    Feng, G.; Qiao, R.; Huang, J; Dai, S.; Sumpter, B. G.; Meunier, V.

    2011-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF{sub 6}], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF{sub 6}] (near the positive electrode) ≈ [BMIM][Cl] (near the negative electrode) ≈ [BMIM][PF{sub 6}] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a “Multiple Ion Layers with Overscreening” (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  11. Does the plasma radiate near a Double Layer?

    NASA Astrophysics Data System (ADS)

    Pottelette, Raymond; Berthomier, Matthieu; Pickett, Jolene

    2016-04-01

    Earth is an intense radio source in the kilometer wavelength range. Being a direct consequence of the parallel acceleration processes taking place in the Earth's auroral region, the radiation contains fundamental information on the characteristic spatial and temporal scales of the turbulent accelerating layer. It is now widely assumed that the cyclotron maser instability leads to Auroral Kilometric Radiation (AKR) generation. It has been suggested from the FAST measurements that the AKR results from a so-called horseshoe electron distribution. This distribution is generated when a localized parallel electric field - called Double Layer (DL) - accelerates earthward the electrons that propagate into an increasing magnetic field. The magnetic moment of the electrons is conserved so that their pitch angle is increased. This results in the creation of a horseshoe-like shape for the electron distribution exhibiting large positive velocity gradients in the direction perpendicular to B, thereby providing free energy for the AKR generation which takes place at the local electron gyrofrequency. In these circumstances, the radiation is generated far away (several thousand kilometers) from a DL, because the parallel accelerated electrons need to travel a long distance before forming a horseshoe distribution. From an experimental point of view, it is not an easy task to highlight the presence of DLs, because they are moving transient structures so that high time resolution measurements are needed. A detailed analysis suggests that these large-amplitude parallel electric fields are located inside sharp density gradients at the interface separating the cold, dense ionospheric plasma from the hot, tenuous magnetospheric plasma. We present some FAST observations which illustrate the generation of elementary radiation events in the neighborhood of a DL. The events occur 10 to 20% above the local electron gyrofrequency in association with the presence of nonlinear coherent structures

  12. Electrochemical Double Layered Capacitor Development and Implementation System

    NASA Astrophysics Data System (ADS)

    Strunk, Gavin P.

    Electrochemical Double Layered Capacitors (EDLC's) are becoming a more popular topic of research for hybrid power systems, especially vehicles. They are known for their high power density, high cycle life, low internal resistance, and wider operating temperature compared to batteries. They are rarely used as a standalone power source; however, because of their lack of energy density compared to batteries and fuel cells. Researchers are now discovering the benefits of using them in hybrid systems. The increased complexity of a hybrid power source presents many challenges. A major drawback of this complexity is the lack of design tools to assist a designer in translating a simulation all the way to a full scale implementation. A full spectrum of tools was designed to assist designers at all stages of implementation including: single cell testing, a multi-cell management system, and a full scale vehicle data acquisition system to monitor performance. First, the full scale vehicle data acquisition is described. The system is isolated from the electric shuttle bus it was tested on to allow the system to be ported to other vehicles and applications. This was done to modularize the system to characterize a wide variety of full scale applications. Next, a single cell test system was designed that allows the designer to characterize cell specifications, as well as, test control and safety systems in a controlled environment. The goal is to ensure safety systems can be thoroughly tested to ensure robustness as the bank is scaled up. This system also includes simulation models that provide examples of using the simulation to predict the behavior of a cell and the test system to validate the results of the simulation. This information is then used by the designer to more effectively design sensor ranges for the bank. Finally, a multi-cell EDLC management system was designed to implement a bank. It incorporates 12 series EDLC cells per control module, and the modular design

  13. The Unique Characteristics of Double Layered Ejecta Craters on Mars

    NASA Astrophysics Data System (ADS)

    Mouginis-Mark, P. J.; Boyce, J. M.

    2004-12-01

    THEMIS VIS images reveal several unique characteristics of double layered ejecta (DLE) craters on Mars that suggest a strikingly different mode of formation from single layered ejecta (SLE) or multi-layered ejecta (MLE) craters. DLE craters are typically 15 to 25 km in diameter and differ from the other types of Martian craters in the following ways: (1) DLE craters lack secondary craters; (2) ejecta layers of DLE craters lack distal ramparts; (3) flow features within the outer layer of DLE craters suggest a very low emplacement velocity; and (4) radial striations exist only within DLE ejecta, and that these striations cross both the inner and outer ejecta layers. The interior morphology of DLE is also less complex than SLE or MLE layered ejecta craters; DLE craters lack wall terraces and, where present, have only simple central peaks. Previous morphologic analyses of DLE craters proposed that they might have formed in the volatile-rich sediments that are believed to infill areas such as Utopia, Arcadia and Acidalia Planitiae. But our inspection of the THEMIS VIS data set confirms the Viking-based results of Barlow and Perez (JGR-Planets, vol. 108 (E8), doi 10.1029/2002JE002036, 2003) that DLE craters are not uniquely located in the northern plains. We find that DLE craters with nearly identical morphologies also occur within the highlands of Mars, including Hesperia Planum, Icaria Planum, Arabia Terra, Noachis Terra, and Terra Sirenum. A few examples of DLE craters are found at a range of elevations between -5.8 km to +2.7 km relative to the MOLA datum, and within two latitudes belts between 23° to 52° N, and between 29° to 46° S. Thus some other mode of formation apart from impact into volatile-rich sediments of the northern plains needs to be identified. Through our on-going characterization of DLE craters with THEMIS VIS data, we hope to identify the attributes of these craters to help identify their unique mode of formation.

  14. Binary nucleation at low temperatures

    NASA Technical Reports Server (NTRS)

    Zahoransky, R. A.; Peters, F.

    1985-01-01

    The onset of homogeneous condensation of binary vapors in the supersaturated state is studied in ethanol/n-propanol and water/ethanol via their unsteady expansion in a shock tube at temperatures below 273 K. Ethanol/n-propanol forms a nearly ideal solution, whereas water/ethanol is an example of a strongly nonideal mixture. Vapor mixtures of various compositions are diluted in dry air at small mole fractions and expanded in the driver section from room temperature. The onset of homogeneous condensation is detected optically and the corresponding thermodynamic state is evaluated. The experimental results are compared with the binary nucleation theory, and the particular problems of theoretical evaluation at low temperatures are discussed.

  15. Accretion onto neutron stars with the presence of a double layer

    NASA Technical Reports Server (NTRS)

    Williams, A. C.; Weisskopf, M. C.; Elsner, R. F.; Darbro, W.; Sutherland, P. G.

    1987-01-01

    It is known, from laboratory experiments, that double layers will form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

  16. Accretion onto neutron stars with the presence of a double layer

    NASA Technical Reports Server (NTRS)

    Williams, A. C.; Weisskopf, M. C.; Elsner, R. F.; Darbro, W.; Sutherland, P. G.

    1986-01-01

    It is known from laboratory experiments that double layers can form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

  17. The Low Temperature Microgravity Physics Facility Project

    NASA Technical Reports Server (NTRS)

    Chui, T.; Holmes, W.; Lai, A.; Croonquist, A.; Eraker, J.; Abbott, R.; Mills, G.; Mohl, J.; Craig, J.; Balachandra, B.; Gannon, J.

    2000-01-01

    We describe the design and development of the Low Temperature Microgravity Physics Facility, which is intended to provide a unique environment of low temperature and microgravity for the scientists to perform breakthrough investigations on board the International Space Station.

  18. The low temperature microgravity physics facility

    NASA Technical Reports Server (NTRS)

    Pensinger, J. F.; Croonquist, A P.; Liu, F. C.; Larson, M. E.; Chui, T. C.

    2002-01-01

    The Low Temperature Microgravity Physics Facility currently in the design phase is a multiple user and multiple flight facility intended to provide a long duration low temperature environment onboard the International Space Station.

  19. The Low Temperature Microgravity Physics Facility

    NASA Technical Reports Server (NTRS)

    Pensinger, J. F.; Chui, T.; Croonquist, A.; Larson, M.; Liu, F.

    2002-01-01

    The Low Temperature Microgravity Physics Facility currently in the design phase is a multiple user and multiple flight facility intended to provide a long duration low temperature environment onboard the International Space Station.

  20. Unravelling the electrochemical double layer by direct probing of the solid/liquid interface

    NASA Astrophysics Data System (ADS)

    Favaro, Marco; Jeong, Beomgyun; Ross, Philip N.; Yano, Junko; Hussain, Zahid; Liu, Zhi; Crumlin, Ethan J.

    2016-08-01

    The electrochemical double layer plays a critical role in electrochemical processes. Whilst there have been many theoretical models predicting structural and electrical organization of the electrochemical double layer, the experimental verification of these models has been challenging due to the limitations of available experimental techniques. The induced potential drop in the electrolyte has never been directly observed and verified experimentally, to the best of our knowledge. In this study, we report the direct probing of the potential drop as well as the potential of zero charge by means of ambient pressure X-ray photoelectron spectroscopy performed under polarization conditions. By analyzing the spectra of the solvent (water) and a spectator neutral molecule with numerical simulations of the electric field, we discern the shape of the electrochemical double layer profile. In addition, we determine how the electrochemical double layer changes as a function of both the electrolyte concentration and applied potential.

  1. Shock waves and double layers in electron degenerate dense plasma with viscous ion fluids

    SciTech Connect

    Mamun, A. A.; Zobaer, M. S.

    2014-02-15

    The properties of ion-acoustic shock waves and double layers propagating in a viscous degenerate dense plasma (containing inertial viscous ion fluid, non-relativistic and ultra-relativistic degenerate electron fluid, and negatively charged stationary heavy element) is investigated. A new nonlinear equation (viz. Gardner equation with additional dissipative term) is derived by the reductive perturbation method. The properties of the ion-acoustic shock waves and double layers are examined by the analysis of the shock and double layer solutions of this new equation (we would like to call it “M-Z equation”). It is found that the properties of these shock and double layer structures obtained from this analysis are significantly different from those obtained from the analysis of standard Gardner or Burgers’ equation. The implications of our results to dense plasmas in astrophysical objects (e.g., non-rotating white dwarf stars) are briefly discussed.

  2. Formation and stability of self-consistent double layer structures in plasma

    SciTech Connect

    Sanduloviciu, M.

    1995-12-31

    The presence of critical values in the current versus voltage characteristic of an electrode immersed in a plasma is used as an argument for the existence of self-consistent (autoorganized) double layers in collisional and collisionless presumed plasmas.

  3. Semi-analytical model for quasi-double-layer surface electrode ion traps

    NASA Astrophysics Data System (ADS)

    Zhang, Jian; Chen, Shuming; Wang, Yaohua

    2016-11-01

    To realize scale quantum processors, the surface-electrode ion trap is an effective scaling approach, including single-layer, double-layer, and quasi-double-layer traps. To calculate critical trap parameters such as the trap center and trap depth, the finite element method (FEM) simulation was widely used, however, it is always time consuming. Moreover, the FEM simulation is also incapable of exhibiting the direct relationship between the geometry dimension and these parameters. To eliminate the problems above, House and Madsen et al. have respectively provided analytic models for single-layer traps and double-layer traps. In this paper, we propose a semi-analytical model for quasi-double-layer traps. This model can be applied to calculate the important parameters above of the ion trap in the trap design process. With this model, we can quickly and precisely find the optimum geometry design for trap electrodes in various cases.

  4. Unravelling the electrochemical double layer by direct probing of the solid/liquid interface

    PubMed Central

    Favaro, Marco; Jeong, Beomgyun; Ross, Philip N.; Yano, Junko; Hussain, Zahid; Liu, Zhi; Crumlin, Ethan J.

    2016-01-01

    The electrochemical double layer plays a critical role in electrochemical processes. Whilst there have been many theoretical models predicting structural and electrical organization of the electrochemical double layer, the experimental verification of these models has been challenging due to the limitations of available experimental techniques. The induced potential drop in the electrolyte has never been directly observed and verified experimentally, to the best of our knowledge. In this study, we report the direct probing of the potential drop as well as the potential of zero charge by means of ambient pressure X-ray photoelectron spectroscopy performed under polarization conditions. By analyzing the spectra of the solvent (water) and a spectator neutral molecule with numerical simulations of the electric field, we discern the shape of the electrochemical double layer profile. In addition, we determine how the electrochemical double layer changes as a function of both the electrolyte concentration and applied potential. PMID:27576762

  5. Design of double layer printed spiral coils for wirelessly-powered biomedical implants.

    PubMed

    Ashoori, Ehsan; Asgarian, Farzad; Sodagar, Amir M; Yoon, Euisik

    2011-01-01

    In this paper employing double layer printed spiral coils (PSCs) is proposed for wireless power transmission in implantable biomedical applications. Detailed modeling of this type of PSCs is presented. Both calculations and measurements of fabricated double layer PSCs indicate that this structure can decrease the size of typical single layer PSCs without any change in the most important parameters of the coils, such as quality factor. Also, it is shown that with equal PSC dimensions and design parameters, double layer PSCs achieve significantly higher inductances and quality factors. Ultimately, a pair of double layer PSCs with a distance of 5 mm in air is used in an inductive link. The power transfer efficiency of this link is about 79.8% with a carrier frequency of 5 MHz and coupling coefficient of 0.189.

  6. Molecular physics of electrical double layers in electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Feng, Guang

    At present, electrochemical capacitors (ECs) are emerging as a novel type of energy storage devices and have attracted remarkable attention, due to their key characteristics, such as high power density and excellent durability. However, the moderate energy density of ECs restricts their widespread deployment in everyday technology. To surmount this limitation, four strategies are adopted: (1) to reduce the total system mass, (2) to increase the specific surface area of electrodes, (3) to enhance normalized capacitance, and (4) to expand the range of potentials applied on electrodes. The implementation of these approaches critically relies on the fundamental understanding of physical processes underlying the energy storage mechanisms hinging on the electrical double layers (EDLs) in ECs. In this dissertation, to gain the fundamentals of EDLs in ECs, based on the strategies described above, we studied the structure, capacitance, and dynamics of EDLs in different electrolytes near electrodes featuring different pores using atomistic simulations. The pores of electrodes are categorized into macropores, mesopores, and micropores, following the decreasing order of pore size. The chosen electrolytes fall into aqueous electrolytes, organic electrolytes, and ionic liquids (ILs), listed by the increasing order of their decomposition voltages. For the aqueous electrolytes, we explored the water and ion distributions inside electrified micropores (< 2nm) using molecular dynamics (MD) simulations. The results showed that the ion distribution differs qualitatively from that described by classical EDL theories. Based on such exceptional phenomenon, a new sandwich capacitance model was developed to describe the EDLs inside micropores, which is capable of predicting the sharp increase of capacitance that has been experimentally observed in micropores. For the organic electrolytes, we examined the ion solvation and the EDL structure, capacitance, and dynamics in the electrolyte of

  7. Time evolution of ion-acoustic double layers in an unmagnetized plasma

    SciTech Connect

    Bharuthram, R.; Momoniat, E.; Mahomed, F.; Singh, S. V.; Islam, M. K.

    2008-08-15

    Ion-acoustic double layers are examined in an unmagnetized, three-component plasma consisting of cold ions and two temperature electrons. Both of the electrons are considered to be Boltzmann distributed and the ions follow the usual fluid dynamical equations. Using the method of characteristics, a time-dependent solution for ion-acoustic double layers is obtained. Results of the findings may have important consequences for the real time satellite observations in the space environment.

  8. On the threshold energization of radiation belt electrons by double layers.

    NASA Astrophysics Data System (ADS)

    Dimmock, A. P.; Osmane, A.; Pulkkinen, T. I.

    2014-12-01

    Recent in situ electric field measurements by the Van Allen Probes in the radiation belts have revealed the existence and ubiquitous presence of double layers [Mozer et al. Phys. Rev. Lett., 2013]. Encounters with double layers during 1 minute burst mode intervals were both common and indicative of large cumulative potential drops. With electric fields averaging 20 mV/m, and sometimes reaching as high as 100 mV/m, observed double layers have been suggested as possible accelerators of radiation belt electrons and generators of a seed population of 100 keV. Using a Hamiltonian approach we quantify the energization threshold of electrons interacting with radiation belts' double layers analytically and numerically. We find that double layers with electric field amplitude δE ranging between 10-100 mV/m and spatial scales of the order of few Debye lengths are very efficient in energizing electrons with initial velocities v ≤ vthermal≈3000 km/s to 1 keV levels, but are unable to energize electrons with energies E ≥ 10 keV. Our results therefore indicate that the localized electric field associated with the double layers are unlikely to generate a seed population of 100 keV necessary for a plethora of relativistic acceleration mechanisms and additional transport to higher energetic levels.

  9. The polarization of a nanoparticle surrounded by a thick electric double layer.

    PubMed

    Zhao, Hui; Bau, Haim H

    2009-05-15

    The polarization of a charged, dielectric, nanoparticle enveloped by a thick electric double layer and subjected to a uniform, alternating electric field is studied theoretically with the standard model (the Poisson-Nernst-Planck PNP equations). The dipole coefficient (f) is calculated as a function of the electric field's frequency and the double layer's thickness (lambda(D)). For a weakly charged particle with a small zeta potential zeta, an approximate, analytic expression for the dipole moment coefficient, accurate within O(zeta(2)), is derived. Two processes contribute to the dipole moment: the ion transport in the electric double layer under the action of the electric field and the particle's electrophoretic motion. As the thickness of the electric double layer increases so does the importance of the latter. In contrast to the case of the thin electric double layer, the particle with the thick double layer exhibits only high-frequency dispersion. The theoretical predictions are compared and favorably agree with experimental data, leading one to conclude that the standard, PNP based-model adequately represents the behavior of nanoparticles subject to electric fields.

  10. Double-layer structure in polar mesospheric clouds observed from SOFIE/AIM

    NASA Astrophysics Data System (ADS)

    Gao, Haiyang; Shepherd, Gordon G.; Tang, Yuanhe; Bu, Lingbing; Wang, Zhen

    2017-02-01

    Double-layer structures in polar mesospheric clouds (PMCs) are observed by using Solar Occultation for Ice Experiment (SOFIE) data between 2007 and 2014. We find 816 and 301 events of double-layer structure with percentages of 10.32 and 7.25 % compared to total PMC events, and the mean distances between two peaks are 3.06 and 2.73 km for the Northern Hemisphere (NH) and Southern Hemisphere (SH) respectively. Double-layer PMCs almost always have less mean ice water content (IWC) than daily IWC during the core of the season, but they are close to each other at the beginning and the end. The result by averaging over all events shows that the particle concentration has obvious double peaks, while the particle radius exhibits an unexpected monotonic increase with decreasing altitude. By further analysis of the background temperature and water vapour residual profiles, we conclude that the lower layer is a reproduced one formed at the bottom of the upper layer. 56.00 and 47.51 % of all double-layer events for the NH and SH respectively have temperature enhancements larger than 2 K locating between their double peaks. The longitudinal anti-correlation between the gravity waves' (GWs') potential energies and occurrence frequencies of double-layer PMCs suggests that the double-layer PMCs tend to form in an environment where the GWs have weaker intensities.

  11. Transition from moving to stationary double layers in a single-ended Q machine

    NASA Technical Reports Server (NTRS)

    Song, Bin; Merlino, R. L.; D'Angelo, N.

    1990-01-01

    Large-amplitude (less than about 100 percent) relaxation oscillations in the plasma potential are known to be generated when the cold endplate of a single-ended Q machine is biased positively. These oscillations are associated with double layers that form near the hot plate (plasma source) and travel toward the endplate at about the ion-acoustic velocity. At the endplate they dissolve and then form again near the hot plate, the entire process repeating itself in a regular manner. By admitting a sufficient amount of neutral gas into the system, the moving double layers were slowed down and eventually stopped. The production of stationary double layers requires an ion source on the high-potential side of the double layers. These ions are provided by ionization of the neutral gas by electrons that are accelerated through the double layer. The dependence of the critical neutral gas pressure required for stationary double-layer formation on endplate voltage, magnetic field strength, and neutral atom mass has been examined. These results are discussed in terms of a simple model of ion production and loss, including ion losses across the magnetic field.

  12. Suspension Device for Use with Low Temperature Refrigerator

    NASA Technical Reports Server (NTRS)

    Wegel, Donald C. (Inventor)

    2015-01-01

    A suspension device for use with a low temperature refrigeration system, such as an adiabatic demagnetization refrigerator is provided. A support ring is provided with three spring-loaded tension assemblies equally spaced about the periphery of the support ring. The tension assemblies each have a pulley, about which is entrained a band of material. Connected to this band is a ring that laterally supports a cylindrical salt pill. Undesired variations in the amount of slack in the band as the salt pill cools are compensated for by the spring loading of the tension assemblies.

  13. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect

    Harlan U. Anderson

    2000-03-31

    This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and Testing of Planar Single Cells. During this time period substantial progress has been made in developing low temperature deposition techniques to produce dense, nanocrystalline yttrium-stabilized zirconia films on both dense oxide and polymer substrates. Progress has been made in the preparation and characterization of thin electrolytes and porous LSM substrates. Both of these tasks are essentially on or ahead of schedule. In our proposal, we suggested that the ZrO{sub 2}/Sc system needed to be considered as a candidate as a thin electrolyte. This was because microcrystalline ZrO{sub 2}/Sc has a significantly higher ionic conductivity than YSZ, particularly at the lower temperatures. As a result, some 0.5 micron thick film of ZrO{sub 2}/16% Sc on an alumina substrate (grain size 20nm) was prepared and the electrical conductivity measured as a function of temperature and oxygen activity. The Sc doped ZrO{sub 2} certainly has a higher conductivity that either 20nm or 2400nm YSZ, however, electronic conductivity dominates the conductivity for oxygen activities below 10{sup -15}. Whereas for YSZ, electronic conductivity is not a problem until the oxygen activity decreases below 10{sup -25}. These initial results show that the ionic conductivity of 20nm YSZ and 20nm ZrO{sub 2}/16% Sc are essentially the same and the enhanced conductivity which is observed for Sc doping in microcrystalline specimens is not observed for the same composition when it is nanocrystalline. In addition they show that the electronic conductivity of Sc doped ZrO{sub 2} is at least two orders of magnitude higher than that observed for YSZ. The conclusion one reaches is that for 0.5 to 1 micron thick nanocrystalline films, Sc doping of ZrO{sub 2} has no benefits compared to YSZ. As a result, electrolyte films of ZrO{sub 2}/Sc should not be considered as candidates

  14. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect

    Harlan U. Anderson; Wayne Huebner; Igor Kosacki

    2000-09-30

    This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and testing of Planar Single Cells. During this time period substantial progress has been made in developing low temperature deposition techniques to produce dense, nanocrystalline yttrium-stabilized zirconia films on both dense oxide and polymer substrates. Microstructural changes in unsupported nanocrystalline yttrium stabilized zirconia (ZrO{sub 2}:16%Y, or YSZ) thin films were examined as a function of temperature and annealing time in order to determine the grain growth exponent and the mechanisms of pinhole formation. Grain growth and pinhole formation were measured using high resolution transmission electron microscopy (HRTEM), normal imaging mode transmission electron microscopy (TEM), electron diffraction, and energy dispersive X-ray microanalysis (EDS). Grain growth was found to vary with a time exponent of about one half before pinhole formation and about one third after. Pinhole formation in 70 nm thick films occurred at temperatures near 600 C, corresponding to a grain size of about 15 nm, or a grain size to film thickness ration of approximately 0.25. The deposition of films on porous substrates is hampered by the penetration of the polymer precursor solution into the substrate whose pores as > 0.2 {micro}m, therefore much attention has to be paid to the development of porous colloidal oxide films onto surfaces. Thus during this line period we have been studying these films. Optical properties have proven to be an excellent way to study the quality of these nanoporous films. The influence of porosity and densification on optical properties of films on sapphire substrates that were prepared from water colloidal suspensions of small ({approx}5nm) particles of ceria was investigated. The colloidal ceria films have initially very porous structure (porosity about 50%) and densification starts at about 600 C accompanied by

  15. Enhanced charge separation and oxidation kinetics of BiVO4 photoanode by double layer structure

    NASA Astrophysics Data System (ADS)

    Yang, Lin; Xiong, Yuli; Dong, Hongmei; Peng, Huarong; Zhang, Yunhuai; Xiao, Peng

    2017-03-01

    Monoclinic bismuth vanadate (BiVO4) is a promising semiconductor for photoelectrochemical water splitting. Here, we developed a facile fabrication of BiVO4 double layer photoanode on the fluorine-doped tin oxide substrate by electrodeposition. The BiVO4 double layer photoanode is composed by a dense BiVO4 film as the inner layer and a nanoporous BiVO4 film as the outer layer. Compared to the BiVO4 single layer photoanode, the optimized BiVO4 double layer photoanode produced a much higher photocurrent of 1.15 mA/cm2 at 0.6 V vs. Ag/AgCl under AM 1.5G (100 mW/cm2) illumination. The results of the photoelectric conversion kinetics for different samples revealed that the charge separation and oxidation kinetics efficiencies for the BiVO4 double layer are 47.2% and 51.6% at 0.6 V vs. Ag/AgCl, while the values for BiVO4 single layer are 32.3% and 35.8%, respectively. The improved photoelectrochemical performance for BiVO4 double layer is mainly ascribed to the decrease of defect state at the interface after inserting a dense BiVO4 as an inner layer to prevent the recombination of photogenerated electron-hole pairs.

  16. Topological defects in electric double layers of ionic liquids at carbon interfaces

    DOE PAGES

    Black, Jennifer M.; Okatan, Mahmut Baris; Feng, Guang; ...

    2015-06-07

    The structure and properties of the electrical double layer in ionic liquids is of interest in a wide range of areas including energy storage, catalysis, lubrication, and many more. Theories describing the electrical double layer for ionic liquids have been proposed, however a full molecular level description of the double layer is lacking. To date, studies have been predominantly focused on ion distributions normal to the surface, however the 3D nature of the electrical double layer in ionic liquids requires a full picture of the double layer structure not only normal to the surface, but also in plane. Here wemore » utilize 3D force mapping to probe the in plane structure of an ionic liquid at a graphite interface and report the direct observation of the structure and properties of topological defects. The observation of ion layering at structural defects such as step-edges, reinforced by molecular dynamics simulations, defines the spatial resolution of the method. Observation of defects allows for the establishment of the universality of ionic liquid behavior vs. separation from the carbon surface and to map internal defect structure. In conclusion, these studies offer a universal pathway for probing the internal structure of topological defects in soft condensed matter on the nanometer level in three dimensions.« less

  17. Umbilical Cord Mesenchymal Stem Cells Combined With a Collagenfibrin Double-layered Membrane Accelerates Wound Healing.

    PubMed

    Nan, Wenbin; Liu, Rui; Chen, Hongli; Xu, Zhihao; Chen, Jiannan; Wang, Manman; Yuan, Zhiqing

    2015-05-01

    The aim of this study was to examine the effects of human umbilical cord mesenchymal stem cells (hUCMSCs) in combination with a collagen-fibrin double-layered membrane on wound healing in mice. A collagen-fibrin double-layered membrane was prepared, and the surface properties of the support material were investigated using a scanning electron microscope. Twenty-four mice were prepared for use as full-thickness skin wound models and randomly divided into 3 groups: group A, a control group in which the wounds were bound using a conventional method; group B, a group treated with hUCMSCs combined with a collagen membrane; and group C, a group treated with hUCMSCs combined with a collagen-fibrin double-layered membrane. The postoperative concrescence of the wounds was observed daily to evaluate the effects of the different treatments. Scanning electron microscope observation showed the collagen-fibrin scaffolds exhibited a highly porous and interconnected structure, and wound healing in the double-layered membrane group was better than in groups A or B. Treatment with hUCMSCs combined with a collagen-fibrin double-layered membrane accelerated wound healing.

  18. Conditions for establishing quasistable double layers in the Earth's auroral upward current region

    SciTech Connect

    Main, D. S.; Newman, D. L.; Ergun, R. E.

    2010-12-15

    The strength and stability of simulated double layers at the ionosphere-auroral cavity boundary have been studied as a function of cold ionospheric electron temperature and density. The simulations are performed with an open boundary one-dimensional particle-in- cell (PIC) simulation and are initialized by imposing a density cavity within the simulation domain. The PIC simulation includes H{sup +} and O{sup +} ion beams, a hot H{sup +} background population, cold ionospheric electrons, and a hot electron population. It is shown that a double layer remains quasistable for a variety of initial conditions and plasma parameters. The average potential drop of the double layer is found to increase as the cold electron temperature decreases. However, in terms of cold electron density, the average potential drop of the double layer is found to increase up to some critical cold electron density and decreases above this value. Comparisons with FAST observations are made and agreement is found between simulation results and observations in the shape and width of the double layer. This study helps put a constraint on the plasma conditions in which a DL can be expected to form and remain quasistable.

  19. Topological defects in electric double layers of ionic liquids at carbon interfaces

    SciTech Connect

    Black, Jennifer M.; Okatan, Mahmut Baris; Feng, Guang; Cummings, Peter T.; Kalinin, Sergei V.; Balke, Nina

    2015-06-07

    The structure and properties of the electrical double layer in ionic liquids is of interest in a wide range of areas including energy storage, catalysis, lubrication, and many more. Theories describing the electrical double layer for ionic liquids have been proposed, however a full molecular level description of the double layer is lacking. To date, studies have been predominantly focused on ion distributions normal to the surface, however the 3D nature of the electrical double layer in ionic liquids requires a full picture of the double layer structure not only normal to the surface, but also in plane. Here we utilize 3D force mapping to probe the in plane structure of an ionic liquid at a graphite interface and report the direct observation of the structure and properties of topological defects. The observation of ion layering at structural defects such as step-edges, reinforced by molecular dynamics simulations, defines the spatial resolution of the method. Observation of defects allows for the establishment of the universality of ionic liquid behavior vs. separation from the carbon surface and to map internal defect structure. In conclusion, these studies offer a universal pathway for probing the internal structure of topological defects in soft condensed matter on the nanometer level in three dimensions.

  20. Fabrication of double layer optical tissue phantom by spin coating method: mimicking epidermal and dermal layer

    NASA Astrophysics Data System (ADS)

    Park, Jihoon; Bae, Yunjin; Bae, Youngwoo; Kang, Heesung; Lee, Kyoung-Joung; Jung, Byungjo

    2013-02-01

    Methodologies to fabricate a solid optical tissue phantom (OTP) mimicking epidermal thin-layer have been developed for in vitro human skin experiment. However, there are cumbersome and time-consuming efforts in fabrication process such as a custom-made casting and calculation of solvent volume before curing process. In a previous study, we introduced a new methodology based on spin coating method (SCM) which is utilized to fabricate a thin-layer OTP analogous to epidermal thickness. In this study, a double layer solid OTP which has epidermal and dermal layers was fabricated to mimic the morphological and optical similarity of human tissue. The structural characteristic and optical properties of fabricated double layer OTP were measured using optical coherence tomography and inverse adding doubling algorithms, respectively. It is expected that the new methodology based on the SCM may be usefully used in the fabrication of double layer OTP.

  1. Numerical simulation of white double-layer coating with different submicron particles on the spectral reflectance

    NASA Astrophysics Data System (ADS)

    Chai, Jiale; Cheng, Qiang; Si, Mengting; Su, Yang; Zhou, Yifan; Song, Jinlin

    2017-03-01

    The spectral selective coating is becoming more and more popular against solar irradiation not only in keeping the coated objects stay cool but also retain the appearance of the objects by reducing the glare of reflected sunlight. In this work a numerical study is investigated to design the double-layer coating with different submicron particles to achieve better performance both in thermal and aesthetic aspects. By comparison, the performance of double-layer coating with TiO2 and ZnO particles is better than that with single particles. What's more, the particle diameter, volume fraction of particle as well as substrate condition is also investigated. The results show that an optimized double-layer coating with particles should be the one with an appropriate particle diameter, volume fraction and the black substrate.

  2. Characteristics of complex light modulation through an amplitude-phase double-layer spatial light modulator.

    PubMed

    Park, Sungjae; Roh, Jinyoung; Kim, Soobin; Park, Juseong; Kang, Hoon; Hahn, Joonku; Jeon, Youngjin; Park, Shinwoong; Kim, Hwi

    2017-02-20

    The complex modulation characteristics of a light field through an amplitude-phase double-layer spatial light modulator are analyzed based on the wave-optic numerical model, and the structural conditions for the optimal double-layer complex modulation structure are investigated. The relationships of interlayer distance, pixel size, and complex light modulation performance are analyzed. The main finding of this study is that the optimal interlayer distance for the double-layer structure can be found at the Talbot effect condition. For validating the practical usefulness of our findings, a high quality reconstruction of the complex computer-generated holograms and the robustness of the angular tolerance of the complex modulation at the Talbot interlayer distance are numerically demonstrated.

  3. Interfacial double layer mediated electrochemical growth of thin-walled platinum nanotubes

    NASA Astrophysics Data System (ADS)

    Zhang, Liqiu; Kim, Sang Min; Cho, Sanghyun; Jang, Hee-Jeong; Liu, Lichun; Park, Sungho

    2017-01-01

    This work demonstrates that thin-walled platinum nanotubes can be readily synthesized by controlling the interfacial double layer in alumina nanochannels. The gradient distribution of ions in nanochannels enables the creation of Pt nanotubes with walls as thin as 5 nm at the top end when using a solution containing polyvinylpyrrolidone (PVP) and chloroplatinic acid (H2PtCl6) under the influence of an electric potential in nanochannels. The highly efficient formation of thin-walled Pt nanotubes is a result of the concentration gradient of {{{{PtCl}}}6}2- and a thick double layer, which was caused by the low concentration of Pt precursors and the enhanced surface charge density induced by protonated PVP steric adsorption. This well-controlled synthesis reveals that the interfacial double layer is a useful tool to tailor the structure of nanomaterials in a nanoscale space, and holds promise in the construction of more complex functional nanostructures.

  4. Low temperature heat capacity of phononic crystal membranes

    NASA Astrophysics Data System (ADS)

    Puurtinen, T. A.; Maasilta, I. J.

    2016-12-01

    Phononic crystal (PnC) membranes are a promising solution to improve sensitivity of bolometric sensor devices operating at low temperatures. Previous work has concentrated only on tuning thermal conductance, but significant changes to the heat capacity are also expected due to the modification of the phonon modes. Here, we calculate the area-specific heat capacity for thin (37.5 - 300 nm) silicon and silicon nitride PnC membranes with cylindrical hole patterns of varying period, in the temperature range 1 - 350 mK. We compare the results to two- and three-dimensional Debye models, as the 3D Debye model is known to give an accurate estimate for the low-temperature heat capacity of a bulk sample. We found that thin PnC membranes do not obey the 3D Debye T3 law, nor the 2D T2 law, but have a weaker, approximately linear temperature dependence in the low temperature limit. We also found that depending on the design, the PnC patterning can either enhance or reduce the heat capacity compared to an unpatterned membrane of the same thickness. At temperatures below ˜ 100 mK, reducing the membrane thickness unintuitively increases the heat capacity for all samples studied. These observations can have significance when designing calorimetric detectors, as heat capacity is a critical parameter for the speed and sensitivity of a device.

  5. Synthesis and thermal stability studies of a series of metastable Dion–Jacobson double-layered neodymium-niobate perovskites

    SciTech Connect

    Josepha, Elisha A.; Farooq, Sara; Mitchell, Cinnamon M.; Wiley, John B.

    2014-08-15

    The Dion–Jacobson double-layered perovskite, RbNdNb{sub 2}O{sub 7}, is used as a precursor to synthesize the series ANdNb{sub 2}O{sub 7} (A=H, Li, Na, K, NH{sub 4}, Ag), and (MCl)NdNb{sub 2}O{sub 7} (M=Mn, Fe, Cu) through ion-exchange reactions ≤400 °C. Thermal stability studies indicated that most of these compounds are metastable. A combination of X-ray powder diffraction and differential thermal analysis were used to determine various low temperature decomposition pathways; these pathways were very dependent on the interlayer species. Overall the ANdNb{sub 2}O{sub 7} series was found to be less stable than the corresponding lanthanides, ALaNb{sub 2}O{sub 7}. - Graphical abstract: A new series of topochemically-prepared metastable neodymium-containing layered perovskites are studied. - Highlights: • A series of new layered neodymium containing perovskites were synthesized by ion exchange. • Products were studied by variable temperature X-ray diffraction and thermal analysis. • Most of the series are metastable showing exothermic transitions on decomposition. • The Nd compounds are less stable due to the smaller size of the Nd relative to La.

  6. Megavolt Parallel Potentials Arising from Double-Layer Streams in the Earth's Outer Radiation Belt

    NASA Astrophysics Data System (ADS)

    Mozer, F. S.; Bale, S. D.; Bonnell, J. W.; Chaston, C. C.; Roth, I.; Wygant, J.

    2013-12-01

    Huge numbers of double layers carrying electric fields parallel to the local magnetic field line have been observed on the Van Allen probes in connection with in situ relativistic electron acceleration in the Earth’s outer radiation belt. For one case with adequate high time resolution data, 7000 double layers were observed in an interval of 1 min to produce a 230 000 V net parallel potential drop crossing the spacecraft. Lower resolution data show that this event lasted for 6 min and that more than 1 000 000 volts of net parallel potential crossed the spacecraft during this time. A double layer traverses the length of a magnetic field line in about 15 s and the orbital motion of the spacecraft perpendicular to the magnetic field was about 700 km during this 6 min interval. Thus, the instantaneous parallel potential along a single magnetic field line was the order of tens of kilovolts. Electrons on the field line might experience many such potential steps in their lifetimes to accelerate them to energies where they serve as the seed population for relativistic acceleration by coherent, large amplitude whistler mode waves. Because the double-layer speed of 3100km/s is the order of the electron acoustic speed (and not the ion acoustic speed) of a 25 eV plasma, the double layers may result from a new electron acoustic mode. Acceleration mechanisms involving double layers may also be important in planetary radiation belts such as Jupiter, Saturn, Uranus, and Neptune, in the solar corona during flares, and in astrophysical objects.

  7. Megavolt parallel potentials arising from double-layer streams in the Earth's outer radiation belt.

    PubMed

    Mozer, F S; Bale, S D; Bonnell, J W; Chaston, C C; Roth, I; Wygant, J

    2013-12-06

    Huge numbers of double layers carrying electric fields parallel to the local magnetic field line have been observed on the Van Allen probes in connection with in situ relativistic electron acceleration in the Earth's outer radiation belt. For one case with adequate high time resolution data, 7000 double layers were observed in an interval of 1 min to produce a 230,000 V net parallel potential drop crossing the spacecraft. Lower resolution data show that this event lasted for 6 min and that more than 1,000,000 volts of net parallel potential crossed the spacecraft during this time. A double layer traverses the length of a magnetic field line in about 15 s and the orbital motion of the spacecraft perpendicular to the magnetic field was about 700 km during this 6 min interval. Thus, the instantaneous parallel potential along a single magnetic field line was the order of tens of kilovolts. Electrons on the field line might experience many such potential steps in their lifetimes to accelerate them to energies where they serve as the seed population for relativistic acceleration by coherent, large amplitude whistler mode waves. Because the double-layer speed of 3100  km/s is the order of the electron acoustic speed (and not the ion acoustic speed) of a 25 eV plasma, the double layers may result from a new electron acoustic mode. Acceleration mechanisms involving double layers may also be important in planetary radiation belts such as Jupiter, Saturn, Uranus, and Neptune, in the solar corona during flares, and in astrophysical objects.

  8. Low Temperature Thermometry Using Inexpensive Silicon Diodes.

    ERIC Educational Resources Information Center

    Waltham, N. R.; And Others

    1981-01-01

    Describes the use of silicon diodes for low temperature thermometry in the teaching laboratory. A simple and inexpensive circuit for display of the diode forward voltage under constant current conditions is described, and its application in the evaluation of low cost silicon diodes as low temperature thermometers is presented. (SK)

  9. Ion phase-space vortices and their relation to small amplitude double layers

    NASA Technical Reports Server (NTRS)

    Pecseli, Hans L.

    1987-01-01

    The properties of ion phase-space vortices are reviewed with particular attention to their role in the formation of small amplitude double layers in current-carrying plasmas. In a one-dimensional analysis, many such double layers simply add up to produce a large voltage drop. A laboratory experiment is carried out in order to investigate the properties of ion phase-space vortices in three dimensions. Their lifetime is significantly reduced as compared with similar results from one-dimensional numerical simulations of the problem.

  10. Arbitrary amplitude double layers in warm dust kinetic Alfven wave plasmas

    SciTech Connect

    Gogoi, Runmoni; Devi, Nirupama

    2008-07-15

    Large amplitude electrostatic structures associated with low-frequency dust kinetic Alfvenic waves are investigated under the pressure (temperature) gradient indicative of dust dynamics. The set of equations governing the dust dynamics, Boltzmann electrons, ions and Maxwell's equation have been reduced to a single equation known as the Sagdeev potential equation. Parameter ranges for the existence of arbitrary amplitude double layers are observed. Exact analytical expressions for the energy integral is obtained and computed numerically through which sub-Alfvenic arbitrary amplitude rarefactive double layers are found to exist.

  11. Ion-acoustic double-layers in a magnetized plasma with nonthermal electrons

    SciTech Connect

    Rios, L. A.; Galvão, R. M. O.

    2013-11-15

    In the present work we investigate the existence of obliquely propagating ion-acoustic double layers in magnetized two-electron plasmas. The fluid model is used to describe the ion dynamics, and the hot electron population is modeled via a κ distribution function, which has been proved to be appropriate for modeling non-Maxwellian plasmas. A quasineutral condition is assumed to investigate these nonlinear structures, which leads to the formation of double-layers propagating with slow ion-acoustic velocity. The problem is investigated numerically, and the influence of parameters such as nonthermality is discussed.

  12. Double-layer ion acceleration triggered by ion magnetization in expanding radiofrequency plasma sources

    SciTech Connect

    Takahashi, Kazunori; Charles, Christine; Boswell, Rod W.; Fujiwara, Tamiya

    2010-10-04

    Ion energy distribution functions downstream of the source exit in magnetically expanding low-pressure plasmas are experimentally investigated for four source tube diameters ranging from about 5 to 15 cm. The magnetic-field threshold corresponding to a transition from a simple expanding plasma to a double layer-containing plasma is observed to increase with a decrease in the source tube diameter. The results demonstrate that for the four geometries, the double layer and the accelerated ion beam form when the ion Larmour radius in the source becomes smaller than the source tube radius, i.e., when the ions become magnetized in the source tube.

  13. Auroral-particle precipitation and trapping caused by electrostatic double layers in the ionosphere.

    PubMed

    Albert, R D; Lindstrom, P J

    1970-12-25

    Interpretation of high-resolution angular distribution measurements of the primary auroral electron flux detected by a rocket probe launched into a visible aurora from Fort Churchill in the fall of 1966 leads to the following conclusions. The auroral electron flux is nearly monoenergetic and has a quasi-trapped as well as a precipitating component. The quasi-trapped flux appears to be limited to a region defined by magnetic-mirror points and multiple electrostatic double layers in the ionosphere. The electrostatic field of the double-layer distribution enhances the aurora by lowering the magnetic-mirror points and supplying energy to the primary auroral electrons.

  14. Large amplitude double layers in a positively charged dusty plasma with nonthermal electrons

    SciTech Connect

    Djebli, M.; Marif, H.

    2009-06-15

    A pseudopotential approach is used to investigate large amplitude dust-acoustic solitary structures for a plasma composed of positively charged dust, cold electrons, and nonthermal hot electrons. Numerical investigation for an adiabatic situation is conducted to examine the existence region of the wave. The negative potential of the double layers is found to be dependent on nonthermal parameters, Mach number, and electrons temperature. A range of the nonthermal parameters values exists for which two possible double layers for the same plasma mix at different Mach numbers and with significant different amplitudes. The present model is used to investigate localized structures in the lower-altitude Earth's ionosphere.

  15. Spacecraft Charging in Low Temperature Environments

    NASA Technical Reports Server (NTRS)

    Parker, Linda N.

    2007-01-01

    Spacecraft charging in plasma and radiation environments is a temperature dependent phenomenon due to the reduction of electrical conductivity in dielectric materials at low temperatures. Charging time constants are proportional to l/conductivity may become very large (on the order of days to years) at low temperatures and accumulation of charge densities in insulators in charging environments traditionally considered benign at ambient temperatures may be sufficient to produce charge densities and electric fields of concern in insulators at low temperatures. Low temperature charging is of interest because a number of spacecraft-primarily infrared astronomy and microwave cosmology observatories-are currently being design, built, and or operated at very cold temperatures on the order of 40K to 100K. This paper reviews the temperature dependence of spacecraft charging processes and material parameters important to charging as a function of temperature with an emphasis on low temperatures regimes.

  16. Double layers and plasma-wave resistivity in extragalactic jets - Cavity formation and radio-wave emission

    NASA Technical Reports Server (NTRS)

    Borovsky, Joseph E.

    1987-01-01

    Current driven electrostatic-wave- and electromagnetic-wave-produced resistivities do not occur in extragalactic jets for estimated values of the carried currents. Strong plasma double layers, however, may exist within self-maintained density cavities. The relativistic double-layer-emitted electron and ion beams drive plasma-wave resistivities in the low- and high-potential plasma adjacent to the double layers. The double-layer-emitted electron beams may also emit polarized radio waves via a collective bremsstrahlung process mediated by electrostatic two-stream instabilities.

  17. Double layers and plasma-wave resistivity in extragalactic jets: Cavity formation and radio-wave emission

    NASA Technical Reports Server (NTRS)

    Borovsky, Joseph E.

    1987-01-01

    For estimated values of the currents carried by extragalactic jets, current-driven electrostatic-wave- and electromagnetic-wave-produced resistivities do not occur. Strong plasma double layers, however, may exist within self-maintained density cavities, the relativistic double-layer-emitted electron, and ion beams driving plasma-wave resistivities in the low- and high-potential plasma adjacent to the double layers. The double-layer-emitted electron beams may also emit polarized radio waves via a collective bremsstrahlung process mediated by electrostatic two-stream instabilities.

  18. Large amplitude dust-acoustic double layers in non-thermal plasmas with positive and negative dust

    SciTech Connect

    Maharaj, S. K.; Bharuthram, R.; Singh, S. V.; Lakhina, G. S.; Pillay, S. R.

    2011-11-29

    The existence of large amplitude double layers in a plasma composed of cold negative dust, adiabatic positive dust, non-thermal ions and Boltzmann electrons is investigated using the Sagdeev pseudopotential technique. Both positive potential and negative potential double layers are found to be supported by the model. The variation of the maximum amplitudes of the double layers and corresponding Mach numbers are examined as a function of various plasma parameters. In particular, we investigate to what extent ion non-thermal effects are required for positive potential double layers to occur.

  19. Large amplitude dust-acoustic double layers in non-thermal plasmas with positive and negative dust

    NASA Astrophysics Data System (ADS)

    Maharaj, S. K.; Bharuthram, R.; Singh, S. V.; Pillay, S. R.; Lakhina, G. S.

    2011-11-01

    The existence of large amplitude double layers in a plasma composed of cold negative dust, adiabatic positive dust, non-thermal ions and Boltzmann electrons is investigated using the Sagdeev pseudopotential technique. Both positive potential and negative potential double layers are found to be supported by the model. The variation of the maximum amplitudes of the double layers and corresponding Mach numbers are examined as a function of various plasma parameters. In particular, we investigate to what extent ion non-thermal effects are required for positive potential double layers to occur.

  20. Low-Temperature Power Electronics Program

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Dickman, John E.; Hammoud, Ahmad; Gerber, Scott

    1997-01-01

    Many space and some terrestrial applications would benefit from the availability of low-temperature electronics. Exploration missions to the outer planets, Earth-orbiting and deep-space probes, and communications satellites are examples of space applications which operate in low-temperature environments. Space probes deployed near Pluto must operate in temperatures as low as -229 C. Figure 1 depicts the average temperature of a space probe warmed by the sun for various locations throughout the solar system. Terrestrial applications where components and systems must operate in low-temperature environments include cryogenic instrumentation, superconducting magnetic energy storage, magnetic levitation transportation system, and arctic exploration. The development of electrical power systems capable of extremely low-temperature operation represents a key element of some advanced space power systems. The Low-Temperature Power Electronics Program at NASA Lewis Research Center focuses on the design, fabrication, and characterization of low-temperature power systems and the development of supporting technologies for low-temperature operations such as dielectric and insulating materials, power components, optoelectronic components, and packaging and integration of devices, components, and systems.

  1. Microwave absorption properties of double-layer absorber based on carbonyl iron/barium hexaferrite composites

    NASA Astrophysics Data System (ADS)

    Ren, Xiaohu; Fan, Huiqing; Cheng, Yankui

    2016-05-01

    The microwave absorption properties of BaCo0.4Zn1.6Fe16O27 ferrite and carbonyl iron powder with single-layer and double-layer composite absorbers were investigated based on the electromagnetic transmission line theory in the frequency range from 1 to 14 GHz. XRD was used to characterize the structure of prepared absorbing particles. SEM was used to examine the micromorphology of the particles and composites. The complex permittivity and permeability of composites were measured by using a vector network analyzer. The reflection loss of the single-layer and double-layer absorbers with different thicknesses and orders was investigated. The results show that double-layer absorbers have better microwave absorption properties than single-layer absorbers. The microwave absorption properties of the double-layer structure are influenced by the coupling interactions between the matching and absorption layers. As the pure ferrite used as matching layer and the composite of BF-5CI used as absorption, the minimum RL of absorber can achieve to -55.4 dB and the bandwidth of RL <-10 dB ranged from 5.6 to 10.8 GHz when the thicknesses of matching layer and absorption layer were 0.9 and 1.4 mm, respectively.

  2. Laser cutting silicon-glass double layer wafer with laser induced thermal-crack propagation

    NASA Astrophysics Data System (ADS)

    Cai, Yecheng; Yang, Lijun; Zhang, Hongzhi; Wang, Yang

    2016-07-01

    This study was aimed at introducing the laser induced thermal-crack propagation (LITP) technology to solve the silicon-glass double layer wafer dicing problems in the packaging procedure of silicon-glass device packaged by WLCSP technology, investigating the feasibility of this idea, and studying the crack propagation process of LITP cutting double layer wafer. In this paper, the physical process of the 1064 nm laser beam interact with the double layer wafer during the cutting process was studied theoretically. A mathematical model consists the volumetric heating source and the surface heating source has been established. The temperature and stress distribution was simulated by using finite element method (FEM) analysis software ABAQUS. The extended finite element method (XFEM) was added to the simulation as the supplementary features to simulate the crack propagation process and the crack propagation profile. The silicon-glass double layer wafer cutting verification experiment under typical parameters was conducted by using the 1064 nm semiconductor laser. The crack propagation profile on the fracture surface was examined by optical microscope and explained from the stress distribution and XFEM status. It was concluded that the quality of the finished fracture surface has been greatly improved, and the experiment results were well supported by the numerical simulation results.

  3. Expanded graphite—Phenolic resin composites based double layer microwave absorber for X-band applications

    NASA Astrophysics Data System (ADS)

    Gogoi, Jyoti Prasad; Bhattacharyya, Nidhi Saxena

    2014-11-01

    In this investigation, double layer microwave absorbers are designed and developed with paired combination of 5 wt. %, 7 wt. %, 8 wt. %, and 10 wt. % expanded graphite-novolac phenolic resin (EG-NPR) composites, in the frequency range of 8.2-12.4 GHz. The thickness and compositional combination of the two layers constituting the absorber are optimized to achieve minimum value of reflection loss (dB) and a broad microwave absorption bandwidth. Double layer combinations showing -25 dB absorption bandwidth >2 GHz and -30 dB absorption bandwidth >1 GHz are chosen for fabrication. The total thickness of the fabricated double layer microwave absorber is varied from 3 mm to 3.4 mm. Absorption bandwidths at -10 dB, -20 dB, -25 dB and -30 dB are determined for the fabricated structure. The maximum -25 dB and -30 dB absorption bandwidth of 2.47 GHz and 1.77 GHz, respectively, are observed for the double layer structure with (5 wt. %-8 wt. %) EG-NPR composites with total thickness of 3.2 mm, while -10 dB bandwidth covers the entire X-band range.

  4. Effects of hot electron inertia on electron-acoustic solitons and double layers

    SciTech Connect

    Verheest, Frank; Hellberg, Manfred A.

    2015-07-15

    The propagation of arbitrary amplitude electron-acoustic solitons and double layers is investigated in a plasma containing cold positive ions, cool adiabatic and hot isothermal electrons, with the retention of full inertial effects for all species. For analytical tractability, the resulting Sagdeev pseudopotential is expressed in terms of the hot electron density, rather than the electrostatic potential. The existence domains for Mach numbers and hot electron densities clearly show that both rarefactive and compressive solitons can exist. Soliton limitations come from the cool electron sonic point, followed by the hot electron sonic point, until a range of rarefactive double layers occurs. Increasing the relative cool electron density further yields a switch to compressive double layers, which ends when the model assumptions break down. These qualitative results are but little influenced by variations in compositional parameters. A comparison with a Boltzmann distribution for the hot electrons shows that only the cool electron sonic point limit remains, giving higher maximum Mach numbers but similar densities, and a restricted range in relative hot electron density before the model assumptions are exceeded. The Boltzmann distribution can reproduce neither the double layer solutions nor the switch in rarefactive/compressive character or negative/positive polarity.

  5. Double-Layered Matrix of Shellac Wax-Lutrol in Controlled Dual Drug Release.

    PubMed

    Phaechamud, Thawatchai; Choncheewa, Chai-Ek

    2016-12-01

    Double-layered matrix tablets prepared from shellac wax-lutrol were fabricated using a molding technique, and the release of hydrochlorothiazide and propranolol HCl from the inner tablet or outer layer was studied. The simultaneous determination of dual drug release was measured with first derivative UV spectrophotometry. The tablet containing shellac wax as the outer tablet and lutrol as the inner tablet showed more appropriate drug release and the size of the inner layer influenced the rate of drug release. In addition, the aqueous solubility of the drug and the components of the inner tablet or outer layer affected the drug release behavior. Most of the double-layered tablets exhibited the drug-release pattern which fitted well with zero-order kinetic due to the restriction of the release surface. Biphasic drug release pattern was found in the tablet of which the outer layer rapidly eroded. The drug dissolution data from drug-loaded-outer layer could predict the dissolution time for the outer layer of drug-loaded inner part of double-layered matrix tablet. Incorporation of lutrol increased the drug release from shellac wax matrix, and the zero-order release was attained by fabricating it into a double-layered tablet.

  6. [Low temperature plasma technology for biomass refinery].

    PubMed

    Fu, Xiaoguo; Chen, Hongzhang

    2014-05-01

    Biorefinery that utilizes renewable biomass for production of fuels, chemicals and bio-materials has become more and more important in chemical industry. Recently, steam explosion technology, acid and alkali treatment are the main biorefinery treatment technologies. Meanwhile, low temperature plasma technology has attracted extensive attention in biomass refining process due to its unique chemical activity and high energy. We systemically summarize the research progress of low temperature plasma technology for pretreatment, sugar platflow, selective modification, liquefaction and gasification in biomass refinery. Moreover, the mechanism of low temperature plasma in biorefinery and its further development were also discussed.

  7. Dust acoustic double layers in a magnetized dusty self-gravitating plasma with superthermal particles

    NASA Astrophysics Data System (ADS)

    Sabetkar, Akbar; Dorranian, Davoud

    2016-08-01

    Our prime objective of this paper is to examine the parametric regimes for the existence and polarity of dust acoustic double layers (DADLs) and its solitary structures arising from a magnetized self-gravitating opposite polarity dust-plasma (OPDP) model. The constituents of the OPDP model are two species of positively and negatively charged dust grains, Maxwellian electrons and kappa distributed ions. Contributions of gravitational force only on dust grains are taken into account. For weakly nonlinear analysis, the multiple time scale technique has been used to construct the extended Korteweg-de Vries (E-KdV) and modified Korteweg-de Vries (M-KdV) equations. They pinpoint the evolution of DADLs and solitary structures associated with dust acoustic (DA) mode, respectively. The relevant configurational parameters in our study include the superthermality of ions (κ), obliqueness of propagation (θ), ion concentration (δi), static magnetic field B0 (via ω c p , ω c n ), and self-gravitational field (via γ), as well as the density (μ0), charge (α), and mass (β) ratio of positive to negative dust species. The proposed OPDP model permits positive and negative double layer polarities, while higher order nonlinear equation dictates us only positive polarity solitary structures. The main modification due to an increase in self-gravitational field (via γ) is an enhancement in the spatial width of double layers, yet leaving their amplitude, phase speed, and polarity practically unaffected. With enhanced superthermality and other intrinsic parameters in OPDP model, there is an opposite trend in both amplitude and width of double layers, while the amplitude and the width of solitary waves (via M-KdV equation) undergo the identical behaviors. In particular, the amplitude of solitary waves manifests monotonic behavior for permissible range of obliqueness θ, whereas this scenario is acceptable to only width of double layers. The results are discussed in the context of

  8. Ion acoustic solitons/double layers in two-ion plasma revisited

    SciTech Connect

    Lakhina, G. S. Singh, S. V. Kakad, A. P.

    2014-06-15

    Ion acoustic solitons and double layers are studied in a collisionless plasma consisting of cold heavier ion species, a warm lighter ion species, and hot electrons having Boltzmann distributions by Sagdeev pseudo-potential technique. In contrast to the previous results, no double layers and super-solitons are found when both the heavy and lighter ion species are treated as cold. Only the positive potential solitons are found in this case. When the thermal effects of the lighter ion species are included, in addition to the usual ion-acoustic solitons occurring at M > 1 (where the Mach number, M, is defined as the ratio of the speed of the solitary wave and the ion-acoustic speed considering temperature of hot electrons and mass of the heavier ion species), slow ion-acoustic solitons/double layers are found to occur at low Mach number (M < 1). The slow ion-acoustic mode is actually a new ion-ion hybrid acoustic mode which disappears when the normalized number density of lighter ion species tends to 1 (i.e., no heavier species). An interesting property of the new slow ion-acoustic mode is that at low number density of the lighter ion species, only negative potential solitons/double layers are found whereas for increasing densities there is a transition first to positive solitons/double layers, and then only positive solitons. The model can be easily applicable to the dusty plasmas having positively charged dust grains by replacing the heavier ion species by the dust mass and doing a simple normalization to take account of the dust charge.

  9. Cylindrical wormholes

    SciTech Connect

    Bronnikov, K. A.; Lemos, Jose P. S.

    2009-05-15

    It is shown that the existence of static, cylindrically symmetric wormholes does not require violation of the weak or null energy conditions near the throat, and cylindrically symmetric wormhole geometries can appear with less exotic sources than wormholes whose throats have a spherical topology. Examples of exact wormhole solutions are given with scalar, spinor and electromagnetic fields as sources, and these fields are not necessarily phantom. In particular, there are wormhole solutions for a massless, minimally coupled scalar field in the presence of a negative cosmological constant, and for an azimuthal Maxwell electromagnetic field. All these solutions are not asymptotically flat. A no-go theorem is proved, according to which a flat (or string) asymptotic behavior on both sides of a cylindrical wormhole throat is impossible if the energy density of matter is everywhere nonnegative.

  10. Low-Temperature Electronic Components Being Developed

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Hammond, Ahmad

    1999-01-01

    In many future NASA missions, such as deep space planetary exploration and the Next Generation Space Telescope, electrical components and systems must operate reliably and efficiently in extremely low temperature environments. Most modern electronic components cannot operate below moderately low operating temperatures (-40 to -55 C). The low-temperature electronics program at the NASA Lewis Research Center is focusing on the development and characterization of low-temperature components and the integration of the developed devices into demonstrable very low-temperature (-200 C) power systems such as dc-dc converters. Such low-temperature electronics will not only tolerate hostile environments but also will reduce system size and weight by eliminating radioisotope heating units, thereby reducing launch cost, improving reliability and lifetime, and increasing energy densities. Low-temperature electronic components will also have a great influence on terrestrial applications such as medical instrumentation, magnetic levitation transportation systems, and arctic and antarctic exploration. Lewis researchers are now performing extensive evaluations of commercially available as well as custom-made devices. These include various types of energy storage and signal capacitors, power switching devices, magnetic and superconducting materials, and primary lithium batteries, to name a few.

  11. Electronics Demonstrated for Low- Temperature Operation

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Hammond, Ahmad; Gerber, Scott S.

    2000-01-01

    The operation of electronic systems at cryogenic temperatures is anticipated for many NASA spacecraft, such as planetary explorers and deep space probes. For example, an unheated interplanetary probe launched to explore the rings of Saturn would experience an average temperature near Saturn of about 183 C. Electronics capable of low-temperature operation in the harsh deep space environment also would help improve circuit performance, increase system efficiency, and reduce payload development and launch costs. An ongoing research and development program on low-temperature electronics at the NASA Glenn Research Center at Lewis Field is focusing on the design of efficient power systems that can survive and exploit the advantages of low-temperature environments. The targeted systems, which are mission driven, include converters, inverters, controls, digital circuits, and special-purpose circuits. Initial development efforts successfully demonstrated the low-temperature operation and cold-restart of several direct-current/direct-current (dc/dc) converters based on different types of circuit design, some with superconducting inductors. The table lists some of these dc/dc converters with their properties, and the photograph shows a high-voltage, high-power dc/dc converter designed for an ion propulsion system for low-temperature operation. The development efforts of advanced electronic systems and the supporting technologies for low-temperature operation are being carried out in-house and through collaboration with other Government agencies, industry, and academia. The Low Temperature Electronics Program supports missions and development programs at NASA s Jet Propulsion Laboratory and Goddard Space Flight Center. The developed technologies will be transferred to commercial end users for applications such as satellite infrared sensors and medical diagnostic equipment.

  12. Double layer effects in a model of proton discharge on charged electrodes

    PubMed Central

    2014-01-01

    Summary We report first results on double layer effects on proton discharge reactions from aqueous solutions to charged platinum electrodes. We have extended a recently developed combined proton transfer/proton discharge model on the basis of empirical valence bond theory to include specifically adsorbed sodium cations and chloride anions. For each of four studied systems 800–1000 trajectories of a discharging proton were integrated by molecular dynamics simulations until discharge occurred. The results show significant influences of ion presence on the average behavior of protons prior to the discharge event. Rationalization of the observed behavior cannot be based solely on the electrochemical potential (or surface charge) but needs to resort to the molecular details of the double layer structure. PMID:25161833

  13. A new correlation effect in the Helmholtz and surface potentials of the electrical double layer.

    PubMed

    González-Tovar, Enrique; Jiménez-Angeles, Felipe; Messina, René; Lozada-Cassou, Marcelo

    2004-05-22

    The restricted primitive model of an electrical double layer around a spherical macroparticle is studied by using integral equation theories and Monte Carlo simulations. The resulting theoretical curves for the Helmholtz and surface potentials versus the macroparticle charge show an unexpected positive curvature when the ionic size of uni- and divalent electrolyte species is increased. This is a novel effect that is confirmed here by computer experiments. An explanation of this phenomenon is advanced in terms of the adsorption and layering of the electrolytic species and of the compactness of the diffuse double layer. It is claimed that the interplay between electrostatic and ionic size correlation effects, absent in the classical Poisson-Boltzmann view, is responsible for this singularity.

  14. Resistivity due to weak double layers - A model for auroral arc thickness

    NASA Technical Reports Server (NTRS)

    Prakash, Manju; Lysak, Robert L.

    1992-01-01

    We have calculated the resistivity due to a sequence of fluctuating weak double layers aligned parallel to the ambient magnetic field line. The average response of an electron drifting through a 1D randomly oriented array of WDLs is studied using a test particle approach. The average is taken over the randomly fluctuating values of the electric field associated with the double layers. Based on our calculations, we estimate that a 350 eV electron energy the thickness of the visual auroral arc is about 2.5 km and that of the auroral fine structure as about 250 m when mapped down to the ionosphere. The significance of our calculations is discussed in the context of magnetosphere-ionosphere coupling.

  15. First steps towards the realization of a double layer perceptron based on organic memristive devices

    NASA Astrophysics Data System (ADS)

    Emelyanov, A. V.; Lapkin, D. A.; Demin, V. A.; Erokhin, V. V.; Battistoni, S.; Baldi, G.; Dimonte, A.; Korovin, A. N.; Iannotta, S.; Kashkarov, P. K.; Kovalchuk, M. V.

    2016-11-01

    Memristors are widely considered as promising elements for the efficient implementation of synaptic weights in artificial neural networks (ANNs) since they are resistors that keep memory of their previous conductive state. Whereas demonstrations of simple neural networks (e.g., a single-layer perceptron) based on memristors already exist, the implementation of more complicated networks is more challenging and has yet to be reported. In this study, we demonstrate linearly nonseparable combinational logic classification (XOR logic task) using a network implemented with CMOS-based neurons and organic memrisitive devices that constitutes the first step toward the realization of a double layer perceptron. We also show numerically the ability of such network to solve a principally analogue task which cannot be realized by digital devices. The obtained results prove the possibility to create a multilayer ANN based on memristive devices that paves the way for designing a more complex network such as the double layer perceptron.

  16. Molecular simulation of electric double-layer capacitors based on carbon nanotube forests.

    PubMed

    Yang, Lu; Fishbine, Brian H; Migliori, Albert; Pratt, Lawrence R

    2009-09-02

    Described here are the first simulations of electric double-layer capacitors based on carbon nanotube forests modeled fully at a molecular level. The computations determine single-electrode capacitances in the neighborhood of 80 F/g, in agreement with experimental capacitances of electric double-layer capacitors utilizing carbon nanotube forests or carbide-derived carbons as electrode material. The capacitance increases modestly with the decrease of the pore size through radii greater than 1 nm, which is consistent with recent experiments on carbide-derived carbon electrodes. Because the various factors included in these simulations are precisely defined, these simulation data will help to disentangle distinct physical chemical factors that contribute to the performance of these materials, e.g., pore geometry, variable filling of the pores, pseudocapacitance, and electronic characteristics of the nanotubes.

  17. Acoustic radiation force on a double-layer microsphere by a Gaussian focused beam

    SciTech Connect

    Wu, Rongrong; Cheng, Kaixuan; Liu, Jiehui; Mao, Yiwei; Gong, Xiufen; Liu, Xiaozhou

    2014-10-14

    A new model for calculating the radiation force on double-layer microsphere is proposed based on the ray acoustics approach. The axial acoustic radiation force resulting from a focused Gaussian beam incident on spherical shells immersed in water is examined theoretically in relation to its thickness and the contents of its double-layer. The attenuation both in the water and inside the sphere is considered in this method, which cannot be ignored while the high frequency ultrasonic is used. Results of numerical calculations are presented for fat and low density polyethylene materials, with the hollow region filled with animal oil, water, or air. These results show how the acoustic impedance and the sound velocity of both layers, together with the thickness of the shell, affect the acoustic radiation force.

  18. Spatially Resolved Measurements of a Double Layer in an Argon Helicon Plasma

    NASA Astrophysics Data System (ADS)

    Aguirre, Evan; Siddiqui, Umair; McKee, John; Scime, Earl

    2015-11-01

    We report 2-dimensional, spatially resolved observations of a double layer in an expanding helicon plasma. These new measurements investigate the origins of previously observed multiple ion beam populations in the downstream plasma. We use Laser Induced Fluorescence (LIF) to measure the ion velocity distribution functions (IVDFs) of argon ions and neutrals both parallel and perpendicular to the background magnetic field and an rf-compensated Langmuir probe to determine the local plasma potential. These are the first multi-dimensional LIF measurements of ion acceleration in a current-free double layer and were obtained with a recently installed, internal scanning probe system in the HELIX-LEIA experimental facility. This work is supported by US National Science Foundation grant number PHY-1360278.

  19. A double layer model for solar X-ray and microwave pulsations

    NASA Technical Reports Server (NTRS)

    Tapping, K. F.

    1986-01-01

    The wide range of wavelengths over which quasi-periodic pulsations have been observed suggests that the mechanism causing them acts upon the supply of high energy electrons driving the emission processes. A model is described which is based upon the radial shrinkage of a magnetic flux tube. The concentration of the current, along with the reduction in the number of available charge carriers, can rise to a condition where the current demand exceeds the capacity of the thermal electrons. Driven by the large inductance of the external current circuit, an instability takes place in the tube throat, resulting in the formation of a potential double layer, which then accelerates electrons and ions to MeV energies. The double layer can be unstable, collapsing and reforming repeatedly. The resulting pulsed particle beams give rise to pulsating emission which are observed at radio and X-ray wavelengths.

  20. Nonlinear ion-acoustic double-layers in electronegative plasmas with electrons featuring Tsallis distribution

    NASA Astrophysics Data System (ADS)

    Ghebache, Siham; Tribeche, Mouloud

    2016-04-01

    Weakly nonlinear ion-acoustic (IA) double-layers (DLs), which accompany electronegative plasmas composed of positive ions, negative ions, and nonextensive electrons are investigated. A generalized Korteweg-de Vries equation with a cubic nonlinearity is derived using a reductive perturbation method. Different types of electronegative plasmas inspired from the experimental studies of Ichiki et al. (2001) are discussed. It is shown that the IA wave phase velocity, in different mixtures of negative and positive ions, decreases as the nonextensive parameter q increases, before levelling-off at a constant value for larger q. Moreover, a relative increase of Q involves an enhancement of the IA phase velocity. Existence domains of either solitary waves or double-layers are then presented and their parametric dependence is determined. Owing to the electron nonextensivity, our present plasma model can admit compressive as well as rarefactive IA-DLs.

  1. Multianalyte electrochemical biosensor on a monolith electrode by optically scanning the electrical double layer.

    PubMed

    Lee, Seung-Woo; Saraf, Ravi F

    2014-07-15

    Redox on an electrode is an interfacial phenomenon that modulates the charge in the electrical double layer (EDL). A novel instrument, the Scanning Electrometer for Electrical Double-layer (SEED) has been developed to measure multiple enzyme reactions on a monolith electrode due to immunospecific binding with a mixture of respective analytes. SEED quantitatively maps the local redox reaction by scanning a laser on the array of enzyme monolayer spots immobilized on the monolith electrode. SEED measures the change in local charge state of the EDL that abruptly changes due to the redox reaction. The measurement spot size defined by the size of the laser beam is ~10 µm. The SEED signal is linearly proportional to the local redox current density and analyte concentration. The specificity is close to 100%. The SEED readout is compatible with microfluidics platform where the signal degrades less than 2% due to the poly(dimethyl siloxane) (PDMS) body.

  2. Cascading failures coupled model of interdependent double layered public transit network

    NASA Astrophysics Data System (ADS)

    Zhang, Lin; Fu, Bai-Bai; Li, Shu-Bin

    2016-06-01

    Taking urban public transit network as research perspective, this work introduces the influences of adjacent stations on definition of station initial load, the connected edge transit capacity, and the coupled capacity to modify traditional load-capacity cascading failures (CFs) model. Furthermore, we consider the coupled effect of lower layered public transit network on the CFs of upper layered public transit network, and construct CFs coupled model of double layered public transit network with “interdependent relationship”. Finally, taking Jinan city’s public transit network as example, we give the dynamics simulation analysis of CFs under different control parameters based on measurement indicator of station cascading failures ratio (abbreviated as CF) and the scale of time-step cascading failures (abbreviated as TCFl), get the influencing characteristics of various control parameters, and verify the feasibility of CFs coupled model of double layered public transit network.

  3. Thermal analysis of double-layer metal films during femtosecond laser heating

    NASA Astrophysics Data System (ADS)

    Chen, A. M.; Jiang, Y. F.; Sui, L. Z.; Liu, H.; Jin, M. X.; Ding, D. J.

    2011-05-01

    In this paper, the primary interest is the heat effect of the bottom-layer metal on the temperature distribution of the top-layer metal in a double-layer metal structure during femtosecond laser irradiation. The evolution of the surface electron and lattice temperature depends a lot on the thermal parameters of the substrate. The damage threshold can be increased by using a substrate material with high electron-lattice coupling factor. Next, we choose chrome as the bottom-layer material. The results of modeling show that the surface lattice temperature of top-layer gold can be reduced remarkably. For a fixed entire thickness of the double-layer film, there is an optimal proportion of top and bottom layers for which the damage threshold is the highest possible. Also, for increasing the damage threshold, a substrate with higher melting temperature should be chosen.

  4. Structure of an electric double layer containing a 2:2 valency dimer electrolyte

    SciTech Connect

    Silvestre-Alcantara, Whasington; Henderson, Douglas; Wu, Jianzhong; Kaja, Monika; Lamperski, Stanisław; Bhuiyan, Lutful Bari

    2014-12-05

    In this study, the structure of a planar electric double layer formed by a 2:2 valency dimer electrolyte in the vicinity of a uniformly charged planar hard electrode is investigated using density functional theory and Monte Carlo simulations. The dimer electrolyte consists of a mixture of charged divalent dimers and charged divalent monomers in a dielectric continuum. A dimer is constructed by two tangentially tethered rigid spheres, one of which is divalent and positively charged and the other neutral, whereas the monomer is a divalent and negatively charged rigid sphere. The density functional theory reproduces well the simulation results for (i) the singlet distributions of the various ion species with respect to the electrode, and (ii) the mean electrostatic potential. Lastly, comparison with earlier results for a 2:1/1:2 dimer electrolyte shows that the double layer structure is similar when the counterion has the same valency.

  5. Structure of an electric double layer containing a 2:2 valency dimer electrolyte

    DOE PAGES

    Silvestre-Alcantara, Whasington; Henderson, Douglas; Wu, Jianzhong; ...

    2014-12-05

    In this study, the structure of a planar electric double layer formed by a 2:2 valency dimer electrolyte in the vicinity of a uniformly charged planar hard electrode is investigated using density functional theory and Monte Carlo simulations. The dimer electrolyte consists of a mixture of charged divalent dimers and charged divalent monomers in a dielectric continuum. A dimer is constructed by two tangentially tethered rigid spheres, one of which is divalent and positively charged and the other neutral, whereas the monomer is a divalent and negatively charged rigid sphere. The density functional theory reproduces well the simulation results formore » (i) the singlet distributions of the various ion species with respect to the electrode, and (ii) the mean electrostatic potential. Lastly, comparison with earlier results for a 2:1/1:2 dimer electrolyte shows that the double layer structure is similar when the counterion has the same valency.« less

  6. Controlling spin–orbit interaction in a ferromagnetic Fe/Au double layer

    SciTech Connect

    Samarin, Sergey N.; Kostylev, Mikhail; Williams, James F.; Artamonov, Oleg M.; Baraban, Alexander P.; Guagliardo, Paul

    2015-01-26

    Using spin-polarized single- and two-electron spectroscopy, we probe exchange and spin–orbit interaction in a double layer of Fe and Au on W(110) and measure the spin asymmetry of the Bloch spectral density function of the sample. In a 5 ML iron film, the spin-orbit contribution to the measured asymmetry of the (e,2e) spectra was not detectable, whereas a deposition of about 1 ML of gold introduced a substantial spin-orbit component in the measured asymmetry. At the same time, this double layer still exhibits ferromagnetic properties: (i) the spectral density function asymmetry demonstrate imbalance of spin-up and spin-down electron densities in the valence band and (ii) the Stoner excitation asymmetry has almost the same value as in a pure Fe film.

  7. Kinetic model for an auroral double layer that spans many gravitational scale heights

    SciTech Connect

    Robertson, Scott

    2014-12-15

    The electrostatic potential profile and the particle densities of a simplified auroral double layer are found using a relaxation method to solve Poisson's equation in one dimension. The electron and ion distribution functions for the ionosphere and magnetosphere are specified at the boundaries, and the particle densities are found from a collisionless kinetic model. The ion distribution function includes the gravitational potential energy; hence, the unperturbed ionospheric plasma has a density gradient. The plasma potential at the upper boundary is given a large negative value to accelerate electrons downward. The solutions for a wide range of dimensionless parameters show that the double layer forms just above a critical altitude that occurs approximately where the ionospheric density has fallen to the magnetospheric density. Below this altitude, the ionospheric ions are gravitationally confined and have the expected scale height for quasineutral plasma in gravity.

  8. Application of double-layered skin phantoms for optical flow imaging during laser tattoo treatments

    NASA Astrophysics Data System (ADS)

    Lee, Byeong-il; Song, Woosub; Kim, Hyejin; Kang, Hyun Wook

    2016-05-01

    The feasible application of double-layered skin phantoms was evaluated to identify artificial blood flow with a Doppler optical coherence tomography (DOCT) system for laser tattoo treatments. Polydimethylsiloxane (PDMS) was used to fabricate the artificial phantoms with flow channels embedded. A double-integrating sphere system with an inverse adding-doubling method quantified both the absorption and the reduced scattering coefficients for epidermis and dermis phantoms. Both OCT and caliper measurements confirmed the double-layered phantom structure (epidermis = 136 ± 17 µm vs. dermis = 3.0 ± 0.1 mm). The DOCT method demonstrated that high flow rates were associated with high image contrast, visualizing the position and the shape of the flow channel. Application of the channel-embedded skin phantoms in conjunction with DOCT can be a reliable technique to assess dynamic variations in the blood flow during and after laser tattoo treatments.

  9. Density functional study of the electric double layer formed by a high density electrolyte.

    PubMed

    Henderson, Douglas; Lamperski, Stanisław; Jin, Zhehui; Wu, Jianzhong

    2011-11-10

    We use a classical density functional theory (DFT) to study the electric double layer formed by charged hard spheres near a planar charged surface. The DFT predictions are found to be in good agreement with recent computer simulation results. We study the capacitance of the charged hard-sphere system at a range of densities and surface charges and find that the capacitance exhibits a local minimum at low ionic densities and small electrode charge. Although this charging behavior is typical for an aqueous electrolyte solution, the local minimum gradually turns into a maximum as the density of the hard spheres increases. Charged hard spheres at high density provide a reasonable first approximation for ionic liquids. In agreement with experiment, the capacitance of this model ionic liquid double layer has a maximum at small electrode charge density.

  10. Simulation of double layers in a model auroral circuit with nonlinear impedance

    NASA Technical Reports Server (NTRS)

    Smith, R. A.

    1986-01-01

    A reduced circuit description of the U-shaped potential structure of a discrete auroral arc, consisting of the flank transmission line plus parallel-electric-field region, is used to provide the boundary condition for one-dimensional simulations of the double-layer evolution. The model yields asymptotic scalings of the double-layer potential, as a function of an anomalous transport coefficient alpha and of the perpendicular length scale l(a) of the arc. The arc potential phi(DL) scales approximately linearly with alpha, and for alpha fixed phi (DL) about l(a) to the z power. Using parameters appropriate to the auroral zone acceleration region, potentials of phi (DPL) 10 kV scale to projected ionospheric dimensions of about 1 km, with power flows of the order of magnitude of substorm dissipation rates.

  11. Strong double-layer formation by shock waves in nonequilibrium plasmas.

    PubMed

    Bletzinger, P; Ganguly, B N; Garscadden, A

    2003-04-01

    Strong double-layer formation by acoustic shock wave (double layers maintained by the traveling shock front.

  12. Multinuclear in situ magnetic resonance imaging of electrochemical double-layer capacitors.

    PubMed

    Ilott, Andrew J; Trease, Nicole M; Grey, Clare P; Jerschow, Alexej

    2014-08-01

    The last decade has seen an intensified interest in the development and use of electrochemical double-layer capacitors, fuelled by the availability of new electrode materials. The use of nanoporous carbons, in particular, with extremely high surface areas for ion adsorption has enabled the development of working devices with significantly increased capacitances that have become viable alternatives to lithium-ion batteries in certain applications. An understanding of the charge storage mechanism and the ion dynamics inside the nanopores is only just emerging, with the most compelling evidence coming from simulation. Here we present the first in situ magnetic resonance imaging experiments of electrochemical double-layer capacitors. These experiments overcome the limitations of other techniques and give spatially resolved chemical information about the electrolyte ions in real time for a working capacitor of standard geometry. The results provide insight into the predominant capacitive processes occurring at different states of charge and discharge.

  13. A Van der Waals-like theory of plasma double layers

    NASA Technical Reports Server (NTRS)

    Katz, Ira; Davis, V. A.

    1989-01-01

    A theory describing plasma double layers in terms of multiple roots of the charge density expression is presented. The theory presented uses the fact that equilibrium plasmas shield small potential perturbations linearly; for high potentials, the shielding decreases. The approach is analogous to Van der Waals' theory of simple fluids in which inclusion of approximate expressions for both excluded volume and long range attractive forces sufficiently describes the first-order liquid-gas phase transition.

  14. Novel electric double-layer capacitor with a coaxial fiber structure.

    PubMed

    Chen, Xuli; Qiu, Longbin; Ren, Jing; Guan, Guozhen; Lin, Huijuan; Zhang, Zhitao; Chen, Peining; Wang, Yonggang; Peng, Huisheng

    2013-11-26

    A coaxial electric double-layer capacitor fiber is developed from the aligned carbon nanotube fiber and sheet, which functions as two electrodes with a polymer gel sandwiched between them. The unique coaxial structure enables a rapid transportation of ions between the two electrodes with a high electrochemical performance. These energy storage fibers are also flexible and stretchable, and can be woven into and widely used for electronic textiles.

  15. Formating double layer mechanism by electric charged particle stream in plasma

    NASA Astrophysics Data System (ADS)

    Shan-jun, Ma; Qian-li, Yang; Xiao-qing, Li

    1998-08-01

    In this paper, two-fluid equations have been solved after having considered magnetic field generated by charged particle stream. Finally, the distribution of electric field Ez(z, r) and its growth rate γ in plasma have been obtained. From the expression of Ez(z, r) it can be known that the double layer has been formed. With the increase of disturbance γ will be larger, and finally this will result in the interruption of electric current and occurrence of burst.

  16. Non-mean-field theory of anomalously large double layer capacitance.

    PubMed

    Loth, M S; Skinner, Brian; Shklovskii, B I

    2010-07-01

    Mean-field theories claim that the capacitance of the double layer formed at a metal/ionic conductor interface cannot be larger than that of the Helmholtz capacitor, whose width is equal to the radius of an ion. However, in some experiments the apparent width of the double layer capacitor is substantially smaller. We propose an alternate non-mean-field theory of the ionic double layer to explain such large capacitance values. Our theory allows for the binding of discrete ions to their image charges in the metal, which results in the formation of interface dipoles. We focus primarily on the case where only small cations are mobile and other ions form an oppositely charged background. In this case, at small temperature and zero applied voltage dipoles form a correlated liquid on both contacts. We show that at small voltages the capacitance of the double layer is determined by the transfer of dipoles from one electrode to the other and is therefore limited only by the weak dipole-dipole repulsion between bound ions so that the capacitance is very large. At large voltages the depletion of bound ions from one of the capacitor electrodes triggers a collapse of the capacitance to the much smaller mean-field value, as seen in experimental data. We test our analytical predictions with a Monte Carlo simulation and find good agreement. We further argue that our "one-component plasma" model should work well for strongly asymmetric ion liquids. We believe that this work also suggests an improved theory of pseudocapacitance.

  17. Characteristics and development report for the MC4169 double-layer capacitor assembly

    SciTech Connect

    Clark, N.H.; Baca, W.E.

    1993-09-01

    The MC4169 Double-Layer Capacitor Assembly was developed in response to a request from the B61 Systems organization to provide interim power for the B61 Common JTA Development. The project has been successfully completed, and Lot 1 has been built by MMSC/GEND. Development testing showed that this assembly met all design requirements. This report describes the design configuration, environmental testing, and aging, reliability, and safety studies done to ensure that the design requirements were met.

  18. Ionic Liquids as Electrolytes for Electrochemical Double-Layer Capacitors: Structures that Optimize Specific Energy.

    PubMed

    Mousavi, Maral P S; Wilson, Benjamin E; Kashefolgheta, Sadra; Anderson, Evan L; He, Siyao; Bühlmann, Philippe; Stein, Andreas

    2016-02-10

    Key parameters that influence the specific energy of electrochemical double-layer capacitors (EDLCs) are the double-layer capacitance and the operating potential of the cell. The operating potential of the cell is generally limited by the electrochemical window of the electrolyte solution, that is, the range of applied voltages within which the electrolyte or solvent is not reduced or oxidized. Ionic liquids are of interest as electrolytes for EDLCs because they offer relatively wide potential windows. Here, we provide a systematic study of the influence of the physical properties of ionic liquid electrolytes on the electrochemical stability and electrochemical performance (double-layer capacitance, specific energy) of EDLCs that employ a mesoporous carbon model electrode with uniform, highly interconnected mesopores (3DOm carbon). Several ionic liquids with structurally diverse anions (tetrafluoroborate, trifluoromethanesulfonate, trifluoromethanesulfonimide) and cations (imidazolium, ammonium, pyridinium, piperidinium, and pyrrolidinium) were investigated. We show that the cation size has a significant effect on the electrolyte viscosity and conductivity, as well as the capacitance of EDLCs. Imidazolium- and pyridinium-based ionic liquids provide the highest cell capacitance, and ammonium-based ionic liquids offer potential windows much larger than imidazolium and pyridinium ionic liquids. Increasing the chain length of the alkyl substituents in 1-alkyl-3-methylimidazolium trifluoromethanesulfonimide does not widen the potential window of the ionic liquid. We identified the ionic liquids that maximize the specific energies of EDLCs through the combined effects of their potential windows and the double-layer capacitance. The highest specific energies are obtained with ionic liquid electrolytes that possess moderate electrochemical stability, small ionic volumes, low viscosity, and hence high conductivity, the best performing ionic liquid tested being 1-ethyl-3

  19. Ion-acoustic solitons, double layers and rogue waves in plasma having superthermal electrons

    NASA Astrophysics Data System (ADS)

    Singh Saini, Nareshpal

    2016-07-01

    Most of the space and astrophysical plasmas contain different type of charged particles with non-Maxwellian velocity distributions (e.g., nonthermal, superthermal, Tsallis ). These distributions are commonly found in the auroral region of the Earth's magnetosphere, planetary magnetosphere, solar and stellar coronas, solar wind, etc. The observations from various satellite missions have confirmed the presence of superthermal particles in space and astrophysical environments. Over the last many years, there have been a much interest in studying the different kind of properties of the electrostatic nonlinear excitations (solitons, double layers, rogue waves etc.) in a multi-component plasmas in the presence of superthermal particles. It has been analyzed that superthermal distributions are more appropriate than Maxwellian distribution for the modeling of space data. It is interesting to study the dynamics of various kinds of solitary waves, Double layers, Shocks etc. in varieties of plasma systems containing different kind of species obeying Lorentzian (kappa-type)/Tsallis distribution. In this talk, I have focused on the study of large amplitude IA solitary structures (bipolar solitary structures, double layers etc.), modulational instability and rogue waves in multicomponent plasmas. The Sagdeev potential method has been employed to setup an energy balance equation, from which we have studied the characteristics of large amplitude solitary waves under the influence of superthermality of charged particles and other plasma parameters. The critical Mach number has been determined, above which solitary structures are observed and its variation with superthermality of electrons and other parameters has also been discussed. Double layers have also been discussed. Multiple scale reductive perturbation method has been employed to derive NLS equation. From the different kind of solutions of this equation, amplitude modulation of envelope solitons and rogue waves have been

  20. Observation of warm, higher energy electrons transiting a double layer in a helicon plasma

    NASA Astrophysics Data System (ADS)

    Sung, Yung-Ta; Li, Yan; Scharer, John

    2015-11-01

    Experimental observations in MadiHeX indicate that fast electrons with substantial density fractions can be created at low helicon operating pressure. Two-temperature electron distributions including a fast (>80 eV) tail are observed in an inductive RF helicon argon plasma double layer at 0.17 mTorr Ar pressure. The fast, untrapped electrons measured downstream of the double layer have a higher temperature of 13 eV than the trapped, upstream electrons with a temperature of 4 eV. The reduction of plasma potential and density observed in the double layer region would require an upstream temperature ten times the measured 4 eV if occurring via Boltzmann ambipolar expansion. Upstream fluctuations of +/- 30% are also observed in the emissive probe measured plasma potential. Sideband frequencies have been observed at +/- 2 kHz of the driven RF frequency of 13.56 MHz, implying a beam instability effect dominantly upstream of the double layer. This can affect ion acceleration and electron temperature distribution in the region. The mechanism behind this has been explored via several plasma diagnostics tools. An RF-compensated Langmuir probe has been used to measure the electron temperatures and densities, which are cross-checked with ADAS, OES and millimeter wave IF. The EEDF in the plasma has also been profiled to understand the acceleration mechanism. A four-grid RPA and an emissive probe have been used to measure the IEDF and plasma potential. The measured IEDF has also been checked with LIF techniques.

  1. Influence of nonelectrostatic ion-ion interactions on double-layer capacitance

    NASA Astrophysics Data System (ADS)

    Zhao, Hui

    2012-11-01

    Recently a Poisson-Helmholtz-Boltzmann (PHB) model [Bohinc , Phys. Rev. EPLEEE81539-375510.1103/PhysRevE.85.031130 85, 031130 (2012)] was developed by accounting for solvent-mediated nonelectrostatic ion-ion interactions. Nonelectrostatic interactions are described by a Yukawa-like pair potential. In the present work, we modify the PHB model by adding steric effects (finite ion size) into the free energy to derive governing equations. The modified PHB model is capable of capturing both ion specificity and ion crowding. This modified model is then employed to study the capacitance of the double layer. More specifically, we focus on the influence of nonelectrostatic ion-ion interactions on charging a double layer near a flat surface in the presence of steric effects. We numerically compute the differential capacitance as a function of the voltage under various conditions. At small voltages and low salt concentrations (dilute solution), we find out that the predictions from the modified PHB model are the same as those from the classical Poisson-Boltzmann theory, indicating that nonelectrostatic ion-ion interactions and steric effects are negligible. At moderate voltages, nonelectrostatic ion-ion interactions play an important role in determining the differential capacitance. Generally speaking, nonelectrostatic interactions decrease the capacitance because of additional nonelectrostatic repulsion among excess counterions inside the double layer. However, increasing the voltage gradually favors steric effects, which induce a condensed layer with crowding of counterions near the electrode. Accordingly, the predictions from the modified PHB model collapse onto those computed by the modified Poisson-Boltzmann theory considering steric effects alone. Finally, theoretical predictions are compared and favorably agree with experimental data, in particular, in concentrated solutions, leading one to conclude that the modified PHB model adequately predicts the diffuse

  2. Gate-Induced Superconductivity in Layered-Material-Based Electric Double Layer Transistors

    NASA Astrophysics Data System (ADS)

    Ye, J. T.; Zhang, Y. J.; Matsuhashi, Y.; Craciun, M. F.; Russo, S.; Kasahara, Y.; Morpurgo, A. F.; Iwasa, Y.

    2012-12-01

    High carrier density part of many materials could be accessed by a variation of the field effect transistor technique: electric double layer transistor. Carrier density regime of n~1014 cm-2 can be easily accessed electrostatically realizing effective doping without chemical modification. In this study, we utilized micro-cleavage on a number of interesting layered materials. And realized high carrier density state and high performance transport on atomically flat surfaces.

  3. Double-Layered PTFE-Covered Nitinol Stents: Experience in 32 Patients with Malignant Esophageal Strictures

    SciTech Connect

    Park, Jung Gu; Jung, Gyoo-Sik Oh, Kyung Seung; Park, Seon-Ja

    2010-08-15

    We evaluated the effectiveness of a double-layered polytetrafluoroethylene (PTFE)-covered nitinol stent in the palliative treatment of malignant esophageal strictures. A double-layered PTFE-covered nitinol stent was designed to reduce the propensity to migration of conventional covered stent. The stent consists of an inner PTFE-covered stent and an outer uncovered nitinol stent tube. With fluoroscopic guidance, the stent was placed in 32 consecutive patients with malignant esophageal strictures. During the follow-up period, the technical and clinical success rates, complications, and cumulative patient survival and stent patency were evaluated. Stent placement was technically successful in all patients, and no procedural complications occurred. After stent placement, the symptoms of 30 patients (94%) showed improvement. During the mean follow-up of 103 days (range, 9-348 days), 11 (34%) of 32 patients developed recurrent symptoms due to tumor overgrowth in five patients (16%), tumor ingrowth owing to detachment of the covering material (PTFE) apart from the stent wire in 3 (9%), mucosal hyperplasia in 2 (6%), and stent migration in 1 (3%). Ten of these 11 patients were treated by means of placing a second covered stent. Thirty patients died, 29 as a result of disease progression and 1 from aspiration pneumonia. The median survival period was 92 days. The median period of primary stent patency was 190 days. The double-layered PTFE-covered nitinol stent seems to be effective for the palliative treatment of malignant esophageal strictures. We believe that the double-layer configuration of this stent can contribute to decreasing the stent's migration rate.

  4. Low-temperature properties of aviation fuels

    SciTech Connect

    Brunton, C.; Voisey, M.A.; Willcock, C.R.

    1983-01-01

    A review is presented of work on the low-temperature properties of aviation turbine fuels that has been carried out in recent years at Thornton Research Centre. Details of both simulated full-scale aircraft tank tests and laboratory evaluations are included. Zero holdup is considered as a low-temperature specification parameter and a novel method for measuring its value is described. Experimental results are presented which demonstrate that a change from a freezing point to a flow criterion could provide an increase in fuel availability without prejudicing flight safety.

  5. Prototype Low Temperature Low Power Cryocooler,

    DTIC Science & Technology

    1982-02-01

    Zimmerman successfully operated a point-Contact Nb SQUID on a four- stage stirling cycle cryocooler with a mechanical drive power of approxi- mately 15...AD-ADL2 622 LAKE SHORE CRYOTRONICS INC WESTERVILLE OH F/6 13/1 PROTOTYPE LOW TEMPERATURE LOW POWER CRYOCOOLER ,(U) FE13 82 W G P IERC E N0001INROC...pPrototype Low Temperature Low Power Cryocooler // It by Warren G. Pierce February 1982 Prepared under Contract No. N00014-80-C-0825 by LAKE SHORE

  6. Low temperature monitoring system for subsurface barriers

    DOEpatents

    Vinegar, Harold J.; McKinzie, II. Billy John

    2009-08-18

    A system for monitoring temperature of a subsurface low temperature zone is described. The system includes a plurality of freeze wells configured to form the low temperature zone, one or more lasers, and a fiber optic cable coupled to at least one laser. A portion of the fiber optic cable is positioned in at least one freeze well. At least one laser is configured to transmit light pulses into a first end of the fiber optic cable. An analyzer is coupled to the fiber optic cable. The analyzer is configured to receive return signals from the light pulses.

  7. Electrical double layers at shock fronts in glow discharges and afterglows

    SciTech Connect

    Siefert, Nicholas S.

    2010-12-15

    This paper examines the propagation of spark-generated shockwaves (1.0double layer, at the shock front. The double layer balances the flux of charged particles on both sides of the shock front. The double layer voltage drop was measured in the current-carrying discharge using floating probes and compared with previous models. As well, we measured argon 1s{sup 5} metastable-state density and demonstrate that metastable-state neutral species can be compressed across a shock front and approximately predicted using the Rankine-Hugoniot relationship.

  8. Multiphoton fluorescence microscopic imaging through double-layer turbid tissue media

    NASA Astrophysics Data System (ADS)

    Deng, Xiaoyuan; Gan, Xiaosong; Gu, Min

    2002-04-01

    Image formation in multiphoton fluorescence microscopy through double-layer turbid tissue media is investigated using Monte Carlo simulation. With the help of the concept of the effective point spread function, the relationship of image resolution and signal level to the thickness and scattering properties of the double-layer turbid media under single-, two-, and three-photon excitation is revealed. Results show that for a double-layer turbid medium of a given thickness, small particles in the top layer result in a quicker degradation of signal level than large particles in the top layer. This model is then applied to study the penetration depth of multiphoton fluorescence microscopy through human skin tissue which exhibits a layered structure. It is predicated that using 3p excitation leads to a signal level up to two orders of magnitude higher than that under 2p excitation, while diffraction-limited image resolution can be maintained for skin tissue of thickness up to 500 μm.

  9. Anomalous transport in discrete arcs and simulation of double layers in a model auroral circuit

    NASA Technical Reports Server (NTRS)

    Smith, Robert A.

    1987-01-01

    The evolution and long-time stability of a double layer in a discrete auroral arc requires that the parallel current in the arc, which may be considered uniform at the source, be diverted within the arc to charge the flanks of the U-shaped double-layer potential structure. A simple model is presented in which this current re-distribution is effected by anomalous transport based on electrostatic lower hybrid waves driven by the flank structure itself. This process provides the limiting constraint on the double-layer potential. The flank charging may be represented as that of a nonlinear transmission. A simplified model circuit, in which the transmission line is represented by a nonlinear impedance in parallel with a variable resistor, is incorporated in a 1-d simulation model to give the current density at the DL boundaries. Results are presented for the scaling of the DL potential as a function of the width of the arc and the saturation efficiency of the lower hybrid instability mechanism.

  10. Anomalous transport in discrete arcs and simulation of double layers in a model auroral circuit

    NASA Technical Reports Server (NTRS)

    Smith, Robert A.

    1987-01-01

    The evolution and long-time stability of a double layer (DL) in a discrete auroral arc requires that the parallel current in the arc, which may be considered uniform at the source, be diverted within the arc to charge the flanks of the U-shaped double layer potential structure. A simple model is presented in which this current redistribution is effected by anomalous transport based on electrostatic lower hybrid waves driven by the flank structure itself. This process provides the limiting constraint on the double layer potential. The flank charging may be represented as that of a nonlinear transmission line. A simplified model circuit, in which the transmission line is represented by a nonlinear impedance in parallel with a variable resistor, is incorporated in a one-dimensional simulation model to give the current density at the DL boundaries. Results are presented for the scaling of the DL potential as a function of the width of the arc and the saturation efficiency of the lower hybrid instability mechanism.

  11. Catalyzed double layer cathodes for high performance and long life molten carbonate fuel cells

    SciTech Connect

    Bischoff, M.; Jantsch, U.; Rohland, B.

    1996-12-31

    NiO/LiCoO{sub 2} double layer cathodes (DLCs) were prepared with a thin highly active LiCoO{sub 2}-layer by a new double layer tape casting/sintering procedure. The resulting metallic porous precursor plates were mounted into the MCFC and heated up by a special procedure to form LiCoO{sub 2} from air, Co and Li{sub 2}CO{sub 3} in a solid/gas reaction. MCFCs with highly active NiO/LiCoO{sub 2}-DLCs can operate over prolonged periods of time with a Ni-precipitation which is 10% lower than one finds with state of the art NiO cathodes. According to LiCoO{sub 2}-cathodes have theoretical life times of more than 100 000 hours at nonpressurized conditions. MCFCs with new NiO/LiCoO{sub 2} double layer cathodes (DLC) were investigated with regard to variable parameters of their microstructure. From the agglomerate model of the porous MCFC cathode, the dependence of the polarization resistance from the radius of the agglomerates and the inner agglomerate surface area was calculated.

  12. Magnetohydrodynamic effects on a charged colloidal sphere with arbitrary double-layer thickness

    NASA Astrophysics Data System (ADS)

    Hsieh, Tzu H.; Keh, Huan J.

    2010-10-01

    An analytical study is presented for the magnetohydrodynamic (MHD) effects on a translating and rotating colloidal sphere in an arbitrary electrolyte solution prescribed with a general flow field and a uniform magnetic field at a steady state. The electric double layer surrounding the charged particle may have an arbitrary thickness relative to the particle radius. Through the use of a simple perturbation method, the Stokes equations modified with an electric force term, including the Lorentz force contribution, are dealt by using a generalized reciprocal theorem. Using the equilibrium double-layer potential distribution from solving the linearized Poisson-Boltzmann equation, we obtain closed-form formulas for the translational and angular velocities of the spherical particle induced by the MHD effects to the leading order. It is found that the MHD effects on the particle movement associated with the translation and rotation of the particle and the ambient fluid are monotonically increasing functions of κa, where κ is the Debye screening parameter and a is the particle radius. Any pure rotational Stokes flow of the electrolyte solution in the presence of the magnetic field exerts no MHD effect on the particle directly in the case of a very thick double layer (κa →0). The MHD effect caused by the pure straining flow of the electrolyte solution can drive the particle to rotate, but it makes no contribution to the translation of the particle.

  13. Swelling pressure of a divalent-rich bentonite: Diffuse double-layer theory revisited

    NASA Astrophysics Data System (ADS)

    Schanz, Tom; Tripathy, Snehasis

    2009-05-01

    Physicochemical forces are responsible for the swelling pressure development in saturated bentonites. In this paper, the swelling pressures of several compacted bentonite specimens for a range of dry density of 1.10-1.73 Mg/m3 were measured experimentally. The clay used was a divalent-rich Ca-Mg-bentonite with 12% exchangeable Na+ ions. The theoretical swelling pressure-dry density relationship for the bentonite was determined from the Gouy-Chapman diffuse double-layer theory. A comparison of experimental and theoretical results showed that the experimental swelling pressures are either smaller or greater than their theoretical counterparts within different dry density ranges. It is shown that for dry density of the clay less than about 1.55 Mg/m3, a possible dissociation of ions from the surface of the clay platelets contributed to the diffuse double-layer repulsion. At higher dry densities, the adsorptive forces due to surface and ion hydration dominated the swelling pressures of the clay. A comparison of the modified diffuse double-layer theory equations proposed in the literature to determine the swelling pressures of compacted bentonites and the experimental results for the clay in this study showed that the agreement between the calculated and experimental swelling pressure results is very good for dry densities less than 1.55 Mg/m3, whereas at higher dry densities the use of the equations was found to be limited.

  14. Diffusion barrier performance of novel Ti/TaN double layers for Cu metallization

    NASA Astrophysics Data System (ADS)

    Zhou, Y. M.; He, M. Z.; Xie, Z.

    2014-10-01

    Novel Ti/TaN double layers offering good stability as a barrier against Cu metallization have been made achievable by annealing in vacuum better than 1 × 10-3 Pa. Ti/TaN double layers were formed on SiO2/Si substrates by DC magnetron sputtering and then the properties of Cu/Ti/TaN/SiO2/Si film stacks were studied. It was found that the Ti/TaN double layers provide good diffusion barrier between Cu and SiO2/Si up to 750 °C for 30 min. The XRD, Auger and EDS results show that the Cu-Si compounds like Cu3Si were formed by Cu diffusion through Ti/TaN barrier for the 800 °C annealed samples. It seems that the improved diffusion barrier property of Cu/Ti/TaN/SiO2/Si stack is due to the diffusion of nitrogen along the grain boundaries in Ti layer, which would decrease the defects in Ti film and block the diffusion path for Cu diffusion with increasing annealing temperature. The failure mechanism of Ti/TaN bi-layer is similar to the Cu/TaN/Si metallization system in which Cu atoms diffuse through the grain boundary of barrier and react with silicon to form Cu3Si.

  15. Use of electrochemical impedance spectroscopy to determine double-layer capacitance in doped nonpolar liquids.

    PubMed

    Yezer, Benjamin A; Khair, Aditya S; Sides, Paul J; Prieve, Dennis C

    2015-07-01

    Electrochemical impedance spectroscopy in a thin cell (10 μm) was used to infer conductivity, permittivity and the differential double-layer capacitance of solutions of dodecane doped with OLOA 11000 [poly(isobutylene) succinimide] for concentrations of dopant between 0.1% and 10% by weight. All spectra (frequencies between 1 Hz and 100 kHz) were well fit by an equivalent circuit having four elements including a constant-phase element representing the double-layer capacitance. Using Gouy-Chapman theory for small zeta potentials and assuming univalent charge carriers, the double-layer capacitances were converted into charge carrier concentration which was found to be directly proportional to the weight percent of dopant with a 1 wt% solution having 87 carriers/μm(3) (the concentration of either positive or negative charges). This is only 17 ppm of the total monomer concentration calculated from the average molecule weight of the dopant. Dividing the measured conductivities by the charge carrier concentration, we inferred the mobility and hydrodynamic diameters for the charged micelles. The hydrodynamic diameters of carriers were significantly larger than the average diameter of all micelles measured independently by dynamic light scattering. This suggests that only large micelles become charged.

  16. The electric double layer at a metal electrode in pure water

    NASA Astrophysics Data System (ADS)

    Brüesch, Peter; Christen, Thomas

    2004-03-01

    Pure water is a weak electrolyte that dissociates into hydronium ions and hydroxide ions. In contact with a charged electrode a double layer forms for which neither experimental nor theoretical studies exist, in contrast to electrolytes containing extrinsic ions like acids, bases, and solute salts. Starting from a self-consistent solution of the one-dimensional modified Poisson-Boltzmann equation, which takes into account activity coefficients of point-like ions, we explore the properties of the electric double layer by successive incorporation of various correction terms like finite ion size, polarization, image charge, and field dissociation. We also discuss the effect of the usual approximation of an average potential as required for the one-dimensional Poisson-Boltzmann equation, and conclude that the one-dimensional approximation underestimates the ion density. We calculate the electric potential, the ion distributions, the pH-values, the ion-size corrected activity coefficients, and the dissociation constants close to the electric double layer and compare the results for the various model corrections.

  17. Hierarchical Supervisor and Agent Routing Algorithm in LEO/MEO Double-layered Optical Satellite Network

    NASA Astrophysics Data System (ADS)

    Li, Yongjun; Zhao, Shanghong

    2016-09-01

    A novel routing algorithm (Hierarchical Supervisor and Agent Routing Algorithm, HSARA) for LEO/MEO (low earth orbit/medium earth orbit) double-layered optical satellite network is brought forward. The so-called supervisor (MEO satellite) is designed for failure recovery and network management. LEO satellites are grouped according to the virtual managed field of MEO which is different from coverage area of MEO satellite in RF satellite network. In each LEO group, one LEO satellite which has maximal persistent link with its supervisor is called the agent. A LEO group is updated when this optical inter-orbit links between agent LEO satellite and the corresponding MEO satellite supervisor cuts off. In this way, computations of topology changes and LEO group updating can be decreased. Expense of routing is integration of delay and wavelength utilization. HSARA algorithm simulations are implemented and the results are as follows: average network delay of HSARA can reduce 21 ms and 31.2 ms compared with traditional multilayered satellite routing and single-layer LEO satellite respectively; LEO/MEO double-layered optical satellite network can cover polar region which cannot be covered by single-layered LEO satellite and throughput is 1% more than that of single-layered LEO satellite averagely. Therefore, exact global coverage can be achieved with this double-layered optical satellite network.

  18. Droplet shaped anode double layer and electron sheath formation in magnetically constricted anode

    NASA Astrophysics Data System (ADS)

    Chauhan, S.; Ranjan, M.; Bandyopadhyay, M.; Mukherjee, S.

    2016-01-01

    Anode double layer and droplet shaped fireball are found in a magnetically constricted anode. The disc shaped anode is constricted using permanent magnets. The device has only one anode and vacuum chamber acts as cathode. Plasma is created through glow discharge by applying high voltage between the anode and the cathode. Large size droplet shaped glow is obtained near the anode and is shown to have a double layer structure. Discharge is operated in pressure range from 5 ×10-3 mbar to 5 ×10-2 mbar keeping discharge current between 1 and 10 mA . Typical plasma density obtained near anode is 1 ×1010 cm-3 . The profile of plasma potential clearly shows two distinct regions with potential difference of 15.6 V at the boundary of anode glow. The potential difference is close to the ionization potential of Argon gas, which is used during the experiment. This distinct region is visible as bright anode glow and dark "bulk plasma" fill the chamber. This indicates the presence of the double layer formation. The role of magnetic field is also discussed in the formation of the glow, its shape, and the plasma potential profile.

  19. The capacitance of ionic liquid electric double layer near nanostructured electrodes

    NASA Astrophysics Data System (ADS)

    Park, Yun Sung; Ahn, Myung Mo; Kang, In Seok

    2015-11-01

    The electric double layer capacitors (EDLC) with nanostructured electrodes have attracted much attention of researchers due to their high power density and long life time. Recently, the ionic liquids are used as an electrolyte of EDLC owing to their electrochemical stability. When ionic liquids are used as an electrolyte, the interrelations between the electric double layer of ionic liquids and the nanostructured electrode must be studied. In this study, the EDLC systems with nanostructured electrodes and ionic liquids are simulated by solving the modified Poisson-Boltzmann equation proposed by Bazant, Storey, and Kornyshev with COMSOL Multiphysics. Several electrode geometries including exohedral, endohedral and arrayed shapes with different length scales are simulated. The potential and charge distributions in the normal direction to the electrode surface are analyzed. The capacitance per unit area is obtained and compared to that of flat electrode. The structure determines the space for counter-ion packing and co-ion gathering, thus has crucial effects on electric double layer capacitance. The critical increase of capacitance with nanoscale confined space is observed with low electrode potential. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (Grant Number: 2013R1A1A2011956).

  20. Low temperature synthesis of methyl formate

    DOEpatents

    Mahajan, Devinder; Slegeir, William A.; Sapienza, Richard S.; O'Hare, Thomas E.

    1986-01-01

    A gas reaction process for the preferential production of methyl formate over the co-production of methanol wherein the reactant ratio of CO/H.sub.2 is upgraded and this reaction takes place at low temperatures of 50.degree.-150.degree. C. and moderate pressures of .gtoreq.100 psi.

  1. Second Skin Protection against Low Temperature Exposure.

    DTIC Science & Technology

    against injurious effects from exposure to low temperatures. Vinyl plastisols with good viscosity stability have been developed. Accelerators are...of plasticol or silicone rubber foamed on the skin for thermal insulation and thin dense covering layer of plastisol or silicone rubber for abrasion resistance.

  2. Industrial Applications of Low Temperature Plasmas

    SciTech Connect

    Bardsley, J N

    2001-03-15

    The use of low temperature plasmas in industry is illustrated by the discussion of four applications, to lighting, displays, semiconductor manufacturing and pollution control. The type of plasma required for each application is described and typical materials are identified. The need to understand radical formation, ionization and metastable excitation within the discharge and the importance of surface reactions are stressed.

  3. Fuzzy Logic Controller for Low Temperature Application

    NASA Technical Reports Server (NTRS)

    Hahn, Inseob; Gonzalez, A.; Barmatz, M.

    1996-01-01

    The most common temperature controller used in low temperature experiments is the proportional-integral-derivative (PID) controller due to its simplicity and robustness. However, the performance of temperature regulation using the PID controller depends on initial parameter setup, which often requires operator's expert knowledge on the system. In this paper, we present a computer-assisted temperature controller based on the well known.

  4. Arbitrary amplitude dust ion acoustic solitons and double layers in the presence of nonthermal positrons and electrons

    NASA Astrophysics Data System (ADS)

    Banerjee, Gadadhar; Maitra, Sarit

    2016-12-01

    Existence of arbitrary amplitude solitons and double layers have been studied in collisionless unmagnetized multicomponent dusty plasmas with nonthermally distributed positrons and electrons by using Sagdeev's pseudopotential method. The linear dispersion relation is obtained for dust ion acoustic wave mode. The present model supports the coexistence of positive potential solitary waves and negative potential solitary waves and double layers. The criterion for the existence of solitary waves and double layers is derived in terms of Mach number limit. The effects of ion temperature and nonthermality of electrons and positrons are studied. Also the effects of positron and dust concentration on the wave propagation are observed.

  5. Double-Layered Lateral Meniscus in an 8-Year-Old Child: Report of a Rare Case

    PubMed Central

    Kubo, Mitsuhiko; Imai, Shinji

    2016-01-01

    Reports of congenital abnormalities of the lateral meniscus include discoid meniscus, accessory meniscus, double-layered meniscus, and ring-shaped meniscus. Particularly, only a few cases of double-layered meniscus have been reported. We report a case of double-layered lateral meniscus, in which an additional semicircular meniscus was observed under the normal lateral meniscus. The accessory hemimeniscus was resected by means of arthroscopic surgery. This case demonstrates an interesting and extremely rare anatomical abnormality of the lateral meniscus. PMID:27833770

  6. Validity of the "thin" and "thick" double-layer assumptions to model streaming currents in porous media

    NASA Astrophysics Data System (ADS)

    Leinov, E.; Jackson, M.

    2012-12-01

    Measurements of the streaming potential component of the spontaneous potential have been used to characterize groundwater flow and subsurface hydraulic properties in numerous studies. Streaming potentials in porous media arise from the electrical double layer which forms at solid-fluid interfaces. The solid surfaces typically become electrically charged, in which case an excess of counter-charge accumulates in the adjacent fluid. If the fluid is induced to flow by an external pressure gradient, then some of the excess charge within the diffuse part of the double layer is transported with the flow, giving rise to a streaming current. Divergence of the streaming current density establishes an electrical potential, termed the streaming potential. Within the diffuse layer, the Poisson-Boltzmann equation is typically used to describe the variation in electrical potential with distance from the solid surface. In many subsurface settings, it is reasonable to assume that the thickness of the diffuse layer is small compared to the pore radius. This is the so-called 'thin double layer assumption', which has been invoked by numerous authors to model streaming potentials in porous media. However, a number of recent papers have proposed a different approach, in which the thickness of the diffuse layer is assumed to be large compared to the pore radius. This is the so-called 'thick double layer assumption' in which the excess charge density within the pore is assumed to be constant and independent of distance from the solid surface. The advantage of both the 'thin' and 'thick' double layer assumptions is that calculation of the streaming current is greatly simplified. However, perhaps surprisingly, the conditions for which these assumptions are valid have not been determined quantitatively, yet they have a significant impact on the interpretation of streaming potential measurements in natural systems. We use a simple capillary tubes to model investigate the validity of the thin

  7. Measuring Poisson Ratios at Low Temperatures

    NASA Technical Reports Server (NTRS)

    Boozon, R. S.; Shepic, J. A.

    1987-01-01

    Simple extensometer ring measures bulges of specimens in compression. New method of measuring Poisson's ratio used on brittle ceramic materials at cryogenic temperatures. Extensometer ring encircles cylindrical specimen. Four strain gauges connected in fully active Wheatstone bridge self-temperature-compensating. Used at temperatures as low as liquid helium.

  8. Optical and Electrical Characteristics of Graphene Double Layer Formed by a Double Transfer of Graphene Single Layers.

    PubMed

    Kim, Young Jun; Bae, Gi Yoon; Chun, Sungwoo; Park, Wanjun

    2016-03-01

    We demonstrate formation of double layer graphene by means of a double transfer using two single graphene layers grown by a chemical vapor deposition method. It is observed that shiftiness and broadness in the double-resonance of Raman scattering are much weaker than those of bilayer graphene formed naturally. Transport characteristics examined from transmission line measurements and field effect transistors show the similar behavior with those of single layer graphene. It indicates that interlayer separation, in electrical view, is large enough to avoid correlation between layers for the double layer structure. It is also observed from a transistor with the double layer graphene that molecules adsorpted on two inner graphene surfaces in the double layered structure are isolated and conserved from ambient environment.

  9. Capacitance of the double layer formed at the metal/ionic-conductor interface: how large can it be?

    PubMed

    Skinner, Brian; Loth, M S; Shklovskii, B I

    2010-03-26

    The capacitance of the double layer formed at a metal/ionic-conductor interface can be remarkably large, so that the apparent width of the double layer is as small as 0.3 A. Mean-field theories fail to explain such large capacitance. We propose an alternate theory of the ionic double layer which allows for the binding of discrete ions to their image charges in the metal. We show that at small voltages the capacitance of the double layer is limited only by the weak dipole-dipole repulsion between bound ions, and is therefore very large. At large voltages the depletion of bound ions from one of the capacitor electrodes triggers a collapse of the capacitance to the mean-field value.

  10. Proposed double-layer target for the generation of high-quality laser-accelerated ion beams.

    PubMed

    Esirkepov, T Zh; Bulanov, S V; Nishihara, K; Tajima, T; Pegoraro, F; Khoroshkov, V S; Mima, K; Daido, H; Kato, Y; Kitagawa, Y; Nagai, K; Sakabe, S

    2002-10-21

    In order to achieve a high-quality, i.e., monoenergetic, intense ion beam, we propose the use of a double-layer target. The first layer, at the target front, consists of high-Z atoms, while the second (rear) layer is a thin coating of low-Z atoms. The generation of high-quality proton beams from the double-layer target, irradiated by an ultraintense laser pulse, is demonstrated with three-dimensional particle-in-cell simulations.

  11. Manufacturing Demonstration Facility: Low Temperature Materials Synthesis

    SciTech Connect

    Graham, David E.; Moon, Ji-Won; Armstrong, Beth L.; Datskos, Panos G.; Duty, Chad E.; Gresback, Ryan; Ivanov, Ilia N.; Jacobs, Christopher B.; Jellison, Gerald Earle; Jang, Gyoung Gug; Joshi, Pooran C.; Jung, Hyunsung; Meyer, III, Harry M.; Phelps, Tommy

    2015-06-30

    The Manufacturing Demonstration Facility (MDF) low temperature materials synthesis project was established to demonstrate a scalable and sustainable process to produce nanoparticles (NPs) for advanced manufacturing. Previous methods to chemically synthesize NPs typically required expensive, high-purity inorganic chemical reagents, organic solvents and high temperatures. These processes were typically applied at small laboratory scales at yields sufficient for NP characterization, but insufficient to support roll-to-roll processing efforts or device fabrication. The new NanoFermentation processes described here operated at a low temperature (~60 C) in low-cost, aqueous media using bacteria that produce extracellular NPs with controlled size and elemental stoichiometry. Up-scaling activities successfully demonstrated high NP yields and quality in a 900-L pilot-scale reactor, establishing this NanoFermentation process as a competitive biomanufacturing strategy to produce NPs for advanced manufacturing of power electronics, solid-state lighting and sensors.

  12. Building a Cryogen Efficient Low Temperature Lab

    NASA Astrophysics Data System (ADS)

    Davis, John

    2015-03-01

    Over the past few years we have built a new low temperature laboratory at the University of Alberta to study quantum optomechanics and superfluids in confined geometries. With liquid helium at 11/liter in Alberta, helium consumption was a top concern, but so was vibration for optomechanics experiments and magnet stability for ultra-low temperature experiments. I will describe the wet system we have constructed, along with our automated helium recovery and delivery system. Currently our system runs, fully loaded with a sensitive optomechanics experiment at 9 mK, with a waste of one liquid liter equivalent per day of operation - with room for improvement. This may provide a model for both new laboratories and upgrades to existing wet systems.

  13. Cyclic and low temperature effects on microcircuits

    NASA Technical Reports Server (NTRS)

    Weissflug, V. A.; Sisul, E. V.

    1977-01-01

    Cyclic temperature and low temperature operating life tests, and pre-/post-life device evaluations were used to determine the degrading effects of thermal environments on microcircuit reliability. Low power transistor-transistor-logic gates and linear devices were included in each test group. Device metallization systems included aluminum metallization/aluminum wire, aluminum metallization/gold wire, and gold metallization/gold wire. Fewer than 2% electrical failures were observed during the cyclic and low temperature life tests and the post-life evaluations revealed approximately 2% bond pull failures. Reconstruction of aluminum die metallization was observed in all devices and the severity of the reconstruction appeared to be directly related to the magnitude of the temperature excursion. All types of bonds except the gold/gold bonds were weakened by exposure to repeated cyclic temperature stress.

  14. Thermodynamic power stations at low temperatures

    NASA Astrophysics Data System (ADS)

    Malherbe, J.; Ployart, R.; Alleau, T.; Bandelier, P.; Lauro, F.

    The development of low-temperature thermodynamic power stations using solar energy is considered, with special attention given to the choice of the thermodynamic cycle (Rankine), working fluids (frigorific halogen compounds), and heat exchangers. Thermomechanical conversion machines, such as ac motors and rotating volumetric motors are discussed. A system is recommended for the use of solar energy for irrigation and pumping in remote areas. Other applications include the production of cold of fresh water from brackish waters, and energy recovery from hot springs.

  15. Low temperature FMR linewidth in reentrant magnets

    SciTech Connect

    Belozorov, D.P.; Vertiy, A.A.; Golik, A.V.; Tarapov, S.I.

    1994-03-01

    The FMR linewidth is studied experimentally for reentrant magnets (Fe{sub x}Ni{sub 100{minus}x}){sub 77}B{sub 13}Si{sub 10} in the temperature interval 0.3K < T < 200K, for frequencies 68 GHz < {h_bar}{omega}/kT < 78 GHz. The low temperature interval down to T {approx} 0.3K is thoroughly explored. The linewidth behavior agrees qualitatively with the theoretical model.

  16. Advanced Regenerators for Very Low Temperature Cryocoolers.

    DTIC Science & Technology

    1994-02-01

    Ray Radebaugh of the National Institute of Standards and Technology, Boulder, Colorado. The analyses of the very low temperature thermal properties...2rh. 15 Radebaugh (Bib. 21) has shown that AP can be equated to a loss 6P in gross refrigeration rate OE by 6p = 7r 6E AP/(PH - PJ where AP is the...refrigeration minus resultant enthalpy flow) occurs at a smaller phase angle. Radebaugh (Bib. 20, 21) derived the analytic relationships among these

  17. Low-Temperature Spacecraft: Challenges/Opportunities

    NASA Technical Reports Server (NTRS)

    Dickman, J. E.; Patterson, R. L.; Overton, E.; Hammoud, A. N.; Gerber, S. S.

    2001-01-01

    Imagine sending a spacecraft into deep space that operates at the ambient temperature of its environment rather than hundreds of degrees Kelvin warmer. The average temperature of a spacecraft warmed only by the sun drops from 279 K near the Earth's orbit to 90 K near the orbit of Saturn, and to 44 K near Pluto's orbit. At present, deep space probes struggle to maintain an operating temperature near 300 K for the onboard electronics. To warm the electronics without consuming vast amounts of electrical energy, radioisotope heater units (RHUs) are used in vast numbers. Unfortunately, since RHU are always 'on', an active thermal management system is required to reject the excess heat. A spacecraft designed to operate at cryogenic temperatures and shielded from the sun by a large communication dish or solar cell array could be less complex, lighter, and cheaper than current deep space probes. Before a complete low-temperature spacecraft becomes a reality, there are several challenges to be met. Reliable cryogenic power electronics is one of the major challenges. The Low-Temperature Power Electronics Research Group at NASA Glenn Research Center (GRC) has demonstrated the ability of some commercial off the shelf power electronic components to operate at temperatures approaching that of liquid nitrogen (77 K). Below 77 K, there exists an opportunity for the development of reliable semiconductor power switching technologies other than bulk silicon CMOS. This paper will report on the results of NASA GRC's Low-Temperature Power Electronics Program and discuss the challenges to (opportunities for) the creation of a low-temperature spacecraft.

  18. Low-Temperature Hydrothermal Resource Potential Estimate

    SciTech Connect

    Katherine Young

    2016-06-30

    Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible resource base, mean extractable resource and beneficial heat. Data compiled from USGS and other sources. The paper (submitted to GRC 2016) describing the methodology and analysis is also included.

  19. Low-Temperature Hydrothermal Resource Potential

    SciTech Connect

    Katherine Young

    2016-06-30

    Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible resource base, mean extractable resource and beneficial heat. Data compiled from USGS and other sources. The paper (submitted to GRC 2016) describing the methodology and analysis is also included.

  20. Minimizing material damage using low temperature irradiation

    NASA Astrophysics Data System (ADS)

    Craven, E.; Hasanain, F.; Winters, M.

    2012-08-01

    Scientific advancements in healthcare driven both by technological breakthroughs and an aging and increasingly obese population have lead to a changing medical device market. Complex products and devices are being developed to meet the demands of leading edge medical procedures. Specialized materials in these medical devices, including pharmaceuticals and biologics as well as exotic polymers present a challenge for radiation sterilization as many of these components cannot withstand conventional irradiation methods. The irradiation of materials at dry ice temperatures has emerged as a technique that can be used to decrease the radiation sensitivity of materials. The purpose of this study is to examine the effect of low temperature irradiation on a variety of polymer materials, and over a range of temperatures from 0 °C down to -80 °C. The effectiveness of microbial kill is also investigated under each of these conditions. The results of the study show that the effect of low temperature irradiation is material dependent and can alter the balance between crosslinking and chain scission of the polymer. Low temperatures also increase the dose required to achieve an equivalent microbiological kill, therefore dose setting exercises must be performed under the environmental conditions of use.

  1. Dynamical States of Low Temperature Cirrus

    NASA Technical Reports Server (NTRS)

    Barahona, D.; Nenes, A.

    2011-01-01

    Low ice crystal concentration and sustained in-cloud supersaturation, commonly found in cloud observations at low temperature, challenge our understanding of cirrus formation. Heterogeneous freezing from effloresced ammonium sulfate, glassy aerosol, dust and black carbon are proposed to cause these phenomena; this requires low updrafts for cirrus characteristics to agree with observations and is at odds with the gravity wave spectrum in the upper troposphere. Background temperature fluctuations however can establish a dynamical equilibrium between ice production and sedimentation loss (as opposed to ice crystal formation during the first stages of cloud evolution and subsequent slow cloud decay) that explains low temperature cirrus properties. This newly-discovered state is favored at low temperatures and does not require heterogeneous nucleation to occur (the presence of ice nuclei can however facilitate its onset). Our understanding of cirrus clouds and their role in anthropogenic climate change is reshaped, as the type of dynamical forcing will set these clouds in one of two preferred microphysical regimes with very different susceptibility to aerosol.

  2. Structure and charging kinetics of electrical double layers at large electrode voltage

    SciTech Connect

    Cagle, Clint; Feng, Guang; Qiao, Rui; Huang, Jingsong; Sumpter, Bobby G; Meunier, Vincent

    2009-01-01

    The structure and charging kinetics of electrical double layers (EDLs) at interfaces of NaCl solutions and planar electrodes are studied by molecular dynamics (MD) and Poisson Nernst Planck (PNP) simulations. Based on the MD results and prior experimental data, we show that counterion packing in planar EDLs does not reach the steric limit at electrode voltages below 1 V. In addition, we demonstrate that a PNP model, when complemented with a Stern model, can be effectively used to capture the overall charging kinetics. However, the PNP/Stern model can only give a qualitative description of the fine features of the EDL.

  3. Improved Performance of Silicon Carbide Detector Using Double Layer Anti Reflection (AR) Coating

    DTIC Science & Technology

    2013-08-01

    chemical vapor deposition (PECVD) technique at 250 °C. Using a double-layer AR coating with a bottom silicon nitride ( Si3N4 ) layer and a top silicon...simulation curve for different combination of Si3N4 and SiO2 films. ........4 Figure 4. Experimental quantum efficiency curves for different AR...layer AR coating (4) consisting of silicon nitride ( Si3N4 ) and SO2 layers. 2. Experimental The 4H-SiC wafer from which the photo detectors were

  4. Direct thrust measurement of a permanent magnet helicon double layer thruster

    SciTech Connect

    Takahashi, K.; Lafleur, T.; Charles, C.; Alexander, P.; Boswell, R. W.; Perren, M.; Laine, R.; Pottinger, S.; Lappas, V.; Harle, T.; Lamprou, D.

    2011-04-04

    Direct thrust measurements of a permanent magnet helicon double layer thruster have been made using a pendulum thrust balance and a high sensitivity laser displacement sensor. At the low pressures used (0.08 Pa) an ion beam is detected downstream of the thruster exit, and a maximum thrust force of about 3 mN is measured for argon with an rf input power of about 700 W. The measured thrust is proportional to the upstream plasma density and is in good agreement with the theoretical thrust based on the maximum upstream electron pressure.

  5. Role of barrier layer on dielectric function of graphene double layer system at finite temperature

    NASA Astrophysics Data System (ADS)

    Patel, Digish K.; Ambavale, Sagar K.; Prajapati, Ketan; Sharma, A. C.

    2016-05-01

    We have theoretically investigated the static dielectric function of graphene double layer system (GDLS) at finite temperatures within the random phase approximation. GDLS has been suspended on a substrate and barrier layer of three different materials; h-BN, Al2O3 and HfO2 has been introduced between two graphene sheets of GDLS. We have reported dependence of the overall dielectric function of GDLS on interlayer distance and the effect of the dielectric environment at finite temperatures. Results show close relation between changing environment and behavior of dielectric constant of GDLS.

  6. Post heat treatment effects on double layer metal structures for VLSI applications

    NASA Technical Reports Server (NTRS)

    Wade, T. E.; Trotter, J. D.

    1978-01-01

    The realization of high yield double layer metal systems using wet chemistry processes and the ability to extend yields beyond that attainable with wet chemistry by means of post sintering processes at temperatures below 500 C for potential applications in very large scale integration structures were studied. Yields in excess of 98% and average total contact resistance of less than 150 ohms and 200 ohms were realized for a series of 560 vias of 0.5 X 0.5 mils and 0.2 X 0.2 mils in size, respectively.

  7. Double layers in plasmas; Proceedings of the Conference, Huntsville, AL, Mar. 1986

    NASA Technical Reports Server (NTRS)

    Williams, Alton C. (Editor)

    1987-01-01

    Papers are presented on such topics as double layers (DLs) and plasma-wave resistivity in extragalactic jets; the formation of a DL leading to the critical velocity phenomenon; formation mechanisms of laboratory DLs in triple plasma devices; and linear Vlasov stability in one-dimensional DLs. Consideration is also given to weak DLs in the auroral ionosphere; the dynamical properties of very strong DLs in a triple plasma device; particle simulation of auroral DLs; a muonic X-ray laser assisted by the catalyzed fusion of deuterium and tritium; and the feasbility of measuring the nuclear reaction cross sections at energies of several keV in a target under laser compression.

  8. The Skylab barium plasma injection experiments. II - Evidence for a double layer

    NASA Technical Reports Server (NTRS)

    Wescott, E. M.; Stenbaek-Nielsen, H. C.; Hallinan, T. J.; Davis, T. N.; Peek, H. M.

    1976-01-01

    Television observations of a barium-plasma flux tube extending from near 4500 km to near 10,000 km during a magnetic substorm and dawn-sector auroral display indicated several interesting anomalous events. Beyond 5500 km, there was a rapid increase in brightness accompanied by flux-tube splitting and diffusion, leaving behind a truncated single flux tube. From the orientation of the flux tube compared with theoretical field models, the presence of a substantial field-aligned current sheet is deduced. A suggested explanation of these phenomena is given in terms of a plasma potential double layer.

  9. Experimental and Theoretical Study of Nonlinear Phenomena Related to the Double Layer Dynamics in Plasma

    SciTech Connect

    Niculescu, O.; Dimitriu, D. G.

    2010-08-04

    The periodic current bursts observed in the dynamic current-voltage characteristic of a probe in the presence of a plasma fireball in dynamic state were modeled in the frame of the scale relativity model, based on both the fractal space-time concept and the generalization of Einstein's principle of relativity to scale transformations. The double layer dynamics is described by a set of time-dependent Schroedinger-type equations and the self-structuring is given by means of the negative differential resistance. The obtained experimental and theoretical results are proven to be in very good agreement.

  10. Thin-shell wormholes with a double layer in quadratic F (R ) gravity

    NASA Astrophysics Data System (ADS)

    Eiroa, Ernesto F.; Figueroa Aguirre, Griselda

    2016-08-01

    We present a family of spherically symmetric Lorentzian wormholes in quadratic F (R ) gravity, with a thin shell of matter corresponding to the throat. At each side of the shell, the geometry has a different constant value of the curvature scalar R . The junction conditions determine the equation of state between the pressure and energy density at the throat, where a double layer is also located. We analyze the stability of the configurations under perturbations preserving the spherical symmetry. In particular, we study thin-shell wormholes with mass and charge. We find that there exist values of the parameters for which stable static solutions are possible.

  11. Double layer capacitance of porous platinum electrodes in zirconia electrochemical cells

    SciTech Connect

    Robertson, N.L.; Michaels, J.N. )

    1991-05-01

    This paper reports on the capacitance of the double layer at the interface between porous platinum electrodes and yttria-stabilized zirconia measured by potential step chronoampermetry. The capacitance is independent of oxygen partial pressure and electrode potential and increases from 0.2 {mu}F/cm{sup 2} at 555{degrees}C to 1.3 {mu}F/cm{sup 2} at 695{degrees}C. These value are at least an order of magnitude smaller than capacitances extracted from the low-frequency portion of ac impedance spectra. This indicates that the capacitive behavior of platinum electrodes in zirconia cells is dominated by time-dependent faradaic processes.

  12. Effects of mixed discrete surface charges on the electrical double layer.

    PubMed

    Jiménez-Ángeles, Felipe

    2012-08-01

    Adsorption of surface coions and charge reversal are induced at the electrical double layer of a wall charged with positive and negative surface sites next to an electrolyte solution. While for the considered surface charge density these effects are found over a wide range of conditions, they are not observed for the typically employed surface models in equivalent conditions. Important consequences in electrophoresis experiments for different colloids with equal effective surface charge density are foreseen. This study is carried out by means of molecular dynamics simulations.

  13. Laser Induced Fluorescence Studies of Electrostatic Double Layers in an Expanding Helicon Plasma

    NASA Astrophysics Data System (ADS)

    Carr, Jerry, Jr.

    We report the first evidence of a laboratory double layer (DL) collapsing in the presence of an instability studied by Chakraborty Thakur et al. 1 with the use of time resolved laser induced fluorescence (LIF) studies. Higher time resolution studies then provided the first statistically validated proof of the correlation between the ion acoustic instability and a DL. Time-frequency analysis in the form of time resolved cross power spectra and continuous wavelet transforms were used to provide insight into beam formation. The implications of this work is that in the creation of strong DLs in expanding plasmas for plasma propulsion or other applications may be self-limited through instability growth. Over the past decade, experimental and theoretical studies have demonstrated the formation of stable, electrostatic, current-free double layers (CFDLs) in plasmas with a strong density gradient; typically a result of a divergent magnetic field. In this work, we present evidence for the formation of multiple double layers within a single divergent magnetic field structure. Downstream of the divergent magnetic field, multiple accelerated ion populations are observed through laser induced fluorescence measurements of the ion velocity distribution function. The formation of the multiple double layer structure is a strong function of the neutral gas pressure in the experiment. The similarity of the accelerated ion populations observed in these laboratory experiments to ion populations observed in reconnection outflow regions in the magnetosphere and in numerical simulations is also described. If ion energization during magnetic reconnection also results solely from acceleration in electric fields, these observations imply a prediction that the ion heating, i.e., the broadening of ion velocity distribution functions, reported in magnetic reconnection experiments is more accurately described by a superposition of differently accelerated ion populations. Therefore, the ion

  14. Cylindrical Scanner

    SciTech Connect

    Hall, Thomas E.

    1999-04-29

    The CS system is designed to provide a very fast imaging system in order to search for weapons on persons in an airport environment. The Cylindrical Scanner moves a vertical transceiver array rapidly around a person standing stationary. The software can be segmented in to three specific tasks. The first task is data acquisition and scanner control. At the operator's request, this task commands the scanner to move and the radar transceiver array to send data to the computer system in a known and well-ordered manner. The array is moved over the complete aperture in 10 to 12 seconds. At the completion of the array movement the second software task automatically reconstructs the high-resolution image from the radar data utilizing the integrated DSP boards. The third task displays the resulting images, as they become available, to the computer screen for user review and analysis.

  15. Low-temperature direct synthesis of mesoporous vanadium nitrides for electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Lee, Hae-Min; Jeong, Gyoung Hwa; Kim, Sang-Wook; Kim, Chang-Koo

    2017-04-01

    Mesoporous vanadium nitrides are directly synthesized by a one-step chemical precipitation method at a low temperature (70 °C). Structural and morphological analyses reveal that vanadium nitride consist of long and slender nanowhiskers, and mesopores with diameters of 2-5 nm. Compositional analysis confirms the presence of vanadium in the VN structure, along with oxidized vanadium. The cyclic voltammetry and charge-discharge tests indicate that the obtained material stores charges via a combination of electric double-layer capacitance and pseudocapacitance mechanisms. The vanadium nitride electrode exhibits a specific capacitance of 598 F/g at a current density of 4 A/g. After 5000 charge-discharge cycles, the electrode has an equivalent series resistance of 1.42 Ω and retains 83% of its initial specific capacitance. This direct low-temperature synthesis of mesoporous vanadium nitrides is a simple and promising method to achieve high specific capacitance and low equivalent series resistance for electrochemical capacitor applications.

  16. Theoretical Study of Monolayer and Double-Layer Waveguide Love Wave Sensors for Achieving High Sensitivity.

    PubMed

    Li, Shuangming; Wan, Ying; Fan, Chunhai; Su, Yan

    2017-03-22

    Love wave sensors have been widely used for sensing applications. In this work, we introduce the theoretical analysis of the monolayer and double-layer waveguide Love wave sensors. The velocity, particle displacement and energy distribution of Love waves were analyzed. Using the variations of the energy repartition, the sensitivity coefficients of Love wave sensors were calculated. To achieve a higher sensitivity coefficient, a thin gold layer was added as the second waveguide on top of the silicon dioxide (SiO₂) waveguide-based, 36 degree-rotated, Y-cut, X-propagating lithium tantalate (36° YX LiTaO₃) Love wave sensor. The Love wave velocity was significantly reduced by the added gold layer, and the flow of wave energy into the waveguide layer from the substrate was enhanced. By using the double-layer structure, almost a 72-fold enhancement in the sensitivity coefficient was achieved compared to the monolayer structure. Additionally, the thickness of the SiO₂ layer was also reduced with the application of the gold layer, resulting in easier device fabrication. This study allows for the possibility of designing and realizing robust Love wave sensors with high sensitivity and a low limit of detection.

  17. Laser acceleration of monoenergetic protons via a double layer emerging from an ultra-thin foil

    NASA Astrophysics Data System (ADS)

    Eliasson, Bengt; Liu, Chuan S.; Shao, Xi; Sagdeev, Roald; Shukla, Padma K.; Dudnikova, Galina; Liu, T. C.

    2009-11-01

    Theoretical and numerical studies are presented of the acceleration of monoenergetic protons in a double layer formed by the laser irradiation of an ultra-thin film. The ponderomotive force of the laser light pushes the electrons forward, and the induced space charge electric field pulls the ions and makes the thin foil accelerate as a whole. A stable double layer is formed, in which the ions are trapped by the combined electric field and inertial force in the accelerated frame, together with the electrons that are trapped in the well of the ponderomotive and ion electric field. The trapped ions reach monoenergetic energies up to 100 MeV and beyond, making them suitable for cancer treatment. We present an analytic theory for the laser-accelerated ion energy as a function of the laser intensity, foil thickness and the plasma number density. The underlying physics of the trapped and untrapped ions and of the stabilization of the Rayleigh-Taylor instability are discussed.

  18. Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries.

    PubMed

    Zhao, Meng-Qiang; Zhang, Qiang; Huang, Jia-Qi; Tian, Gui-Li; Nie, Jing-Qi; Peng, Hong-Jie; Wei, Fei

    2014-03-03

    Preventing the stacking of graphene is essential to exploiting its full potential in energy-storage applications. The introduction of spacers into graphene layers always results in a change in the intrinsic properties of graphene and/or induces complexity at the interfaces. Here we show the synthesis of an intrinsically unstacked double-layer templated graphene via template-directed chemical vapour deposition. The as-obtained graphene is composed of two unstacked graphene layers separated by a large amount of mesosized protuberances and can be used for high-power lithium-sulphur batteries with excellent high-rate performance. Even after 1,000 cycles, high reversible capacities of ca. 530 mA h g(-1) and 380 mA h g(-1) are retained at 5 C and 10 C, respectively. This type of double-layer graphene is expected to be an important platform that will enable the investigation of stabilized three-dimensional topological porous systems and demonstrate the potential of unstacked graphene materials for advanced energy storage, environmental protection, nanocomposite and healthcare applications.

  19. Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries

    NASA Astrophysics Data System (ADS)

    Zhao, Meng-Qiang; Zhang, Qiang; Huang, Jia-Qi; Tian, Gui-Li; Nie, Jing-Qi; Peng, Hong-Jie; Wei, Fei

    2014-03-01

    Preventing the stacking of graphene is essential to exploiting its full potential in energy-storage applications. The introduction of spacers into graphene layers always results in a change in the intrinsic properties of graphene and/or induces complexity at the interfaces. Here we show the synthesis of an intrinsically unstacked double-layer templated graphene via template-directed chemical vapour deposition. The as-obtained graphene is composed of two unstacked graphene layers separated by a large amount of mesosized protuberances and can be used for high-power lithium-sulphur batteries with excellent high-rate performance. Even after 1,000 cycles, high reversible capacities of ca. 530 mA h g-1 and 380 mA h g-1 are retained at 5 C and 10 C, respectively. This type of double-layer graphene is expected to be an important platform that will enable the investigation of stabilized three-dimensional topological porous systems and demonstrate the potential of unstacked graphene materials for advanced energy storage, environmental protection, nanocomposite and healthcare applications.

  20. Study of surface charge density on solid/liquid interfaces by modulating the electrical double layer

    NASA Astrophysics Data System (ADS)

    Pak, Hyuk Kyu; Moon, Jong Kyun

    2014-11-01

    A solid surface in contact with water or aqueous solution usually carries specific electric charges. These surface charges attract counter ions from the liquid side. Since the geometry of opposite charge distribution parallel to the solid/liquid interface is similar to that of a capacitor, it is called an electrical double layer capacitor (EDLC). Therefore, there is an electrical potential difference across an EDLC in equilibrium. When a liquid bridge is formed between two conducting plates, the system behaves as two serially connected EDLCs. In this work, we propose a new method for investigating the surface charge density on solid/liquid interfaces. By mechanically modulating the electrical double layers and simultaneously applying a DC bias voltage across the plates, an AC electric current can be generated. By measuring the voltage difference between the plates as a function of bias voltage, we can study the surface charge density on solid/liquid interfaces. Our experimental results agree very well with the simple equivalent circuit model proposed here. Furthermore, using this method, one can determine the polarity of the adsorbed state on the solid surface depending on the material used. This work was supported by Center for Soft and Living Matter through IBS program in Korea.

  1. Double layer adhesive silicone dressing as a potential dermal drug delivery film in scar treatment.

    PubMed

    Mojsiewicz-Pieńkowska, Krystyna; Jamrógiewicz, Marzena; Żebrowska, Maria; Mikolaszek, Barbara; Sznitowska, Małgorzata

    2015-03-15

    The present studies focused on the evaluation of design of an adhesive silicone film intended for scar treatment. Developed silicone double layer film was examined in terms of its future relevance to therapy and applicability on the human skin considering properties which included in vitro permeability of water vapor and oxygen. In order to adapt the patches for medical use in the future there were tested such properties as in vitro adhesion and occlusion related to in vivo hydration. From the silicone rubbers double layer silicone film was prepared: a non-adhesive elastomer as a drug carrier (the matrix for active substances - enoxaparin sodium - low molecular weight heparin) and an adhesive elastomer, applied on the surface of the matrix. The novel adhesive silicone film was found to possess optimal properties in comparison to commercially available silicone dressing: adhesion in vivo, adhesion in vitro - 11.79N, occlusion F=85% and water vapor permeability in vitro - WVP=105g/m(2)/24h, hydration of stratum corneum in vivoH=61-89 (RSD=1.6-0.9%), oxygen permeation in vitro - 119-391 cm(3)/m(2)/24 (RSD=0.17%). In vitro release studies indicated sufficient LMWH release rate from silicone matrix. Developed novel adhesive silicone films were considered an effective treatment of scars and keloids and a potential drug carrier able to improve the effectiveness of therapy.

  2. Poisson-Helmholtz-Boltzmann model of the electric double layer: analysis of monovalent ionic mixtures.

    PubMed

    Bohinc, Klemen; Shrestha, Ahis; Brumen, Milan; May, Sylvio

    2012-03-01

    In the classical mean-field description of the electric double layer, known as the Poisson-Boltzmann model, ions interact exclusively through their Coulomb potential. Ion specificity can arise through solvent-mediated, nonelectrostatic interactions between ions. We employ the Yukawa pair potential to model the presence of nonelectrostatic interactions. The combination of Yukawa and Coulomb potential on the mean-field level leads to the Poisson-Helmholtz-Boltzmann model, which employs two auxiliary potentials: one electrostatic and the other nonelectrostatic. In the present work we apply the Poisson-Helmholtz-Boltzmann model to ionic mixtures, consisting of monovalent cations and anions that exhibit different Yukawa interaction strengths. As a specific example we consider a single charged surface in contact with a symmetric monovalent electrolyte. From the minimization of the mean-field free energy we derive the Poisson-Boltzmann and Helmholtz-Boltzmann equations. These nonlinear equations can be solved analytically in the weak perturbation limit. This together with numerical solutions in the nonlinear regime suggests an intricate interplay between electrostatic and nonelectrostatic interactions. The structure and free energy of the electric double layer depends sensitively on the Yukawa interaction strengths between the different ion types and on the nonelectrostatic interactions of the mobile ions with the surface.

  3. Numerical Well Testing Interpretation Model and Applications in Crossflow Double-Layer Reservoirs by Polymer Flooding

    PubMed Central

    Guo, Hui; He, Youwei; Li, Lei; Du, Song; Cheng, Shiqing

    2014-01-01

    This work presents numerical well testing interpretation model and analysis techniques to evaluate formation by using pressure transient data acquired with logging tools in crossflow double-layer reservoirs by polymer flooding. A well testing model is established based on rheology experiments and by considering shear, diffusion, convection, inaccessible pore volume (IPV), permeability reduction, wellbore storage effect, and skin factors. The type curves were then developed based on this model, and parameter sensitivity is analyzed. Our research shows that the type curves have five segments with different flow status: (I) wellbore storage section, (II) intermediate flow section (transient section), (III) mid-radial flow section, (IV) crossflow section (from low permeability layer to high permeability layer), and (V) systematic radial flow section. The polymer flooding field tests prove that our model can accurately determine formation parameters in crossflow double-layer reservoirs by polymer flooding. Moreover, formation damage caused by polymer flooding can also be evaluated by comparison of the interpreted permeability with initial layered permeability before polymer flooding. Comparison of the analysis of numerical solution based on flow mechanism with observed polymer flooding field test data highlights the potential for the application of this interpretation method in formation evaluation and enhanced oil recovery (EOR). PMID:25302335

  4. Theoretical Study of Monolayer and Double-Layer Waveguide Love Wave Sensors for Achieving High Sensitivity

    PubMed Central

    Li, Shuangming; Wan, Ying; Fan, Chunhai; Su, Yan

    2017-01-01

    Love wave sensors have been widely used for sensing applications. In this work, we introduce the theoretical analysis of the monolayer and double-layer waveguide Love wave sensors. The velocity, particle displacement and energy distribution of Love waves were analyzed. Using the variations of the energy repartition, the sensitivity coefficients of Love wave sensors were calculated. To achieve a higher sensitivity coefficient, a thin gold layer was added as the second waveguide on top of the silicon dioxide (SiO2) waveguide–based, 36 degree–rotated, Y-cut, X-propagating lithium tantalate (36° YX LiTaO3) Love wave sensor. The Love wave velocity was significantly reduced by the added gold layer, and the flow of wave energy into the waveguide layer from the substrate was enhanced. By using the double-layer structure, almost a 72-fold enhancement in the sensitivity coefficient was achieved compared to the monolayer structure. Additionally, the thickness of the SiO2 layer was also reduced with the application of the gold layer, resulting in easier device fabrication. This study allows for the possibility of designing and realizing robust Love wave sensors with high sensitivity and a low limit of detection. PMID:28327504

  5. Optical Tagging of Ion Beams Accelerated by Double Layers in Laboratory Plasma

    NASA Astrophysics Data System (ADS)

    Good, Timothy; Aguirre, Evan; Thompson, Derek; Scime, Earl

    2016-10-01

    Experiments in helicon sources that investigate plasma expansion into weakly magnetized, low density regions reveal the production of supersonic ion beams attributed to acceleration by spatially localized double layer structures. Current efforts are aimed at mapping the ion velocity flow field utilizing 2D spatially scanning laser induced fluorescence (LIF) probes that yield metastable ion velocity distribution functions (IVDF) for velocities along and perpendicular to the flow. Observation of metastable ion beams by LIF renders plausible a Lagrangian approach to studying the field-ion interaction via optical tagging. We propose a tagging scheme in which metastable state ion populations are modulated by optical pumping upstream of the double layer and the synchronous detection of LIF at the ion beam velocity is recorded downstream. Besides the unambiguous identification of the source of beam ions, this method can provide detailed dynamical information through time of flight analysis. Preliminary results will be presented. Please include this poster in session that includes poster authored by Evan Aguirre et al.

  6. Bipolar doping of double-layer graphene vertical heterostructures with hydrogenated boron nitride.

    PubMed

    Liu, Zhun; Wang, Ru-Zhi; Liu, Li-Min; Lau, Woon-Ming; Yan, Hui

    2015-05-07

    Using first-principles calculations, we examined the bipolar doping of double-layer graphene vertical heterostructures, which are constructed by hydrogenated boron nitride (BN) sheets sandwiched into two parallel graphene monolayers. The built-in potential difference in hydrogenated BN breaks the interlayer symmetry, resulting in the p- and n-type doping of two graphene layers at 0.83 and -0.8 eV, respectively. By tuning the interlayer spacing between the graphene and hydrogenated BN, the interfacial dipole and screening charge distribution can be significantly affected, which produces large modulations in band alignments, doping levels and tunnel barriers. Furthermore, we present an analytical model to predicate the doping level as a function of the average interlayer spacing. With large interlayer spacings, the "pillow effect" (Pauli repulsion at the highly charge overlapped interface) is diminished and the calculated Dirac point shifts are in good accordance with our prediction models. Our investigations suggest that this double-layer graphene heterostructures constructed using two-dimensional Janus anisotropic materials offer exciting opportunities for developing novel nanoscale optoelectronic and electronic devices.

  7. Using martian single and double layered ejecta craters to probe subsurface stratigraphy

    NASA Astrophysics Data System (ADS)

    Jones, Eriita; Osinski, Gordon R.

    2015-02-01

    Martian craters with fluidized ejecta - including single-layered, double-layered and multiple-layered craters - have been studied extensively, with their formation generally suggested to require some presence of volatiles in the subsurface. However, experimental reproduction of these morphologies, impact modelling, and the occurrence of layered ejecta in putative volatile poor regions suggests that other factors may also play important roles. A recent extensive catalogue of martian impact craters (Robbins, S.J., Hynek, B.M. [2012a]. J. Geophys. Res. 117, E05004) classifies crater ejecta along with their location, diameters and ejecta extents, potentially providing new information on the links between these morphologies and the subsurface. We utilise this catalogue to examine the regional variation in ejecta mobility, onset diameter and the correlation between ejecta mobility and diameter for single- and double-layered ejecta craters on Mars. A simple regional stratigraphic model is developed to explain the observed trends through the viscosity of the layers within the target. Using this model, the potential relative thickness and burial depths of low viscosity layers in the martian subsurface are hypothesised, and compared to other observations and models of subsurface volatiles and how they have varied throughout time.

  8. Measurements of energetic electrons in a Current-Free Double layer

    NASA Astrophysics Data System (ADS)

    Gulbrandsen, Njaal; Fredriksen, Ashild

    2016-09-01

    In inductively coupled helicon sources, current-free double layers (CFDL) can be formed self-consistently without external current forcing. The CFDLs are evidenced by an ion beam formed as a result of a potential drop between the source and the diffusion chamber. The electrons in the double layer play an important role in balancing the ion beam current, but apart from some observations of electron energy probability functions (EEPFs) by means of Langmuir probes, little information has up to now been obtained about the electron population. By means of an inverted retarding field energy analyzer (RFEA) we have measured for the first time the high-energy part of the electron distribution along the radial direction in the diffusion chamber. In this configuration, the RFEA repeller grid is set to a large positive potential, repelling ions and collecting electrons through the discriminator grid. We find a prominent peak of high-energy electrons up to 60 eV at the footprint of the magnetic field lines emerging from the layer near the wall of the source. This coincides with increased electron temperatures and ion densities at this position. Another small but significant distribution of electrons at energies more than 100 eV are observed within the region of the ion beam itself.

  9. Structural design of a double-layered porous hydrogel for effective mass transport.

    PubMed

    Kim, Hyejeong; Kim, Hyeon Jeong; Huh, Hyung Kyu; Hwang, Hyung Ju; Lee, Sang Joon

    2015-03-01

    Mass transport in porous materials is universal in nature, and its worth attracts great attention in many engineering applications. Plant leaves, which work as natural hydraulic pumps for water uptake, have evolved to have the morphological structure for fast water transport to compensate large water loss by leaf transpiration. In this study, we tried to deduce the advantageous structural features of plant leaves for practical applications. Inspired by the tissue organization of the hydraulic pathways in plant leaves, analogous double-layered porous models were fabricated using agarose hydrogel. Solute transport through the hydrogel models with different thickness ratios of the two layers was experimentally observed. In addition, numerical simulation and theoretical analysis were carried out with varying porosity and thickness ratio to investigate the effect of structural factors on mass transport ability. A simple parametric study was also conducted to examine unveiled relations between structural factors. As a result, the porosity and thickness ratio of the two layers are found to govern the mass transport ability in double-layered porous materials. The hydrogel models with widely dispersed pores at a fixed porosity, i.e., close to a homogeneously porous structure, are mostly turned out to exhibit fast mass transport. The present results would provide a new framework for fundamental design of various porous structures for effective mass transport.

  10. Direct separation of faradaic and double layer charging current in potential step voltammetry.

    PubMed

    Tu, Jiarun; Cai, Wensheng; Shao, Xueguang

    2013-11-15

    Double layer charging current in electrochemical systems has been a challenging problem in the last several decades because it causes interference to the accurate measurement of faradaic current. A method for extracting faradaic current and double layer charging current directly from the measured total current in potential step voltammetry is developed by using iterative target transformation factor analysis (ITTFA). The method constructs initial target vectors based on the theoretical formulae of faradaic and charging current, and then calculates the weights of faradaic and charging current in the measured signal via the iterative transformation of the initial vectors. Therefore, the two currents in one experiment can be obtained simultaneously without any assumption. The potential step voltammetric signals of potassium ferricyanide, copper sulfate and paracetamol were analyzed with the proposed method. The results show that the shape of the obtained voltammogram is an ideal sigmoid curve with horizontal straight baseline and plateaus, and the intensity of the signal is greatly enhanced. Therefore, the method provides a new way to measure the pure faradic current in the potential step voltammetric experiment, and may provide an alternative for improving the sensitivity of quantitative analysis.

  11. Double Layers in Expanding Plasmas and Their Relevance to the Auroral Plasma Processes

    NASA Technical Reports Server (NTRS)

    Singh, Nagendra; Khazanov, George; Six, N. Frank (Technical Monitor)

    2002-01-01

    When a dense plasma consisting of a cold and a sufficiently warm electron population expands, a rarefaction shock forms. In the expansion of the polar wind in the magnetosphere, it has been previously shown that when a sufficiently warm electron population also exists, in addition to the usual cold ionospheric one, a discontinuity forms in the electrostatic potential distribution along the magnetic field lines. Despite the lack of spatial resolution and the assumption of quasi-neutrality in the polar wind models, such discontinuities have been called double layers (DLs). Recently similar discontinuities have been invoked to partly explain the auroral acceleration of electrons and ions in the upward current region. By means of one-dimensional Vlasov simulations of expanding plasmas, for the first time we make here the connection between (i) the rarefaction shocks, (ii) the discontinuities in the potential distributions, and (iii) DLs. We show that when plasmas expand from opposite directions into a deep density cavity with a potential drop across it and when the plasma on the high-potential side contains two electron populations, the temporal evolution of the potential and the plasma. distribution generates evolving multiple double layers with an extended density cavity between them. One of the DLs is the rarefaction-shock (RFS) and it forms by the reflections of the cold electrons coming from the high-potential side; it supports a part of the potential drop approximately determined by the hot electron temperature.

  12. Relation between the ion size and pore size for an electric double-layer capacitor.

    PubMed

    Largeot, Celine; Portet, Cristelle; Chmiola, John; Taberna, Pierre-Louis; Gogotsi, Yury; Simon, Patrice

    2008-03-05

    The research on electrochemical double layer capacitors (EDLC), also known as supercapacitors or ultracapacitors, is quickly expanding because their power delivery performance fills the gap between dielectric capacitors and traditional batteries. However, many fundamental questions, such as the relations between the pore size of carbon electrodes, ion size of the electrolyte, and the capacitance have not yet been fully answered. We show that the pore size leading to the maximum double-layer capacitance of a TiC-derived carbon electrode in a solvent-free ethyl-methylimmidazolium-bis(trifluoro-methane-sulfonyl)imide (EMI-TFSI) ionic liquid is roughly equal to the ion size (approximately 0.7 nm). The capacitance values of TiC-CDC produced at 500 degrees C are more than 160 F/g and 85 F/cm(3) at 60 degrees C, while standard activated carbons with larger pores and a broader pore size distribution present capacitance values lower than 100 F/g and 50 F/cm(3) in ionic liquids. A significant drop in capacitance has been observed in pores that were larger or smaller than the ion size by just an angstrom, suggesting that the pore size must be tuned with sub-angstrom accuracy when selecting a carbon/ion couple. This work suggests a general approach to EDLC design leading to the maximum energy density, which has been now proved for both solvated organic salts and solvent-free liquid electrolytes.

  13. Double Layers: Potential Formation and Related Nonlinear Phenomena in Plasmas: Proceedings of the 5th Symposium

    NASA Astrophysics Data System (ADS)

    Iizuka, S.

    1998-02-01

    The Table of Contents for the book is as follows: * PREFACE * INTERNATIONAL SCIENTIFIC COMMITTEE * LOCAL ORGANIZING COMMITTEE AT TOHOKU UNIVERSITY * CHAPTER 1: DOUBLE LAYERS, SHEATHS, AND POTENTIAL STRUCTURES * 1.1 Double Layers * On Fluid Models of Stationary, Acoustic Double Layers (Invited) * Particle Simulation of Double Layer (Invited) * Space-Time Dependence of Non-Steady Double Layers * The Role of Low Energy Electrons for the Generation of Anode Double Layers in Glow Discharges * Arbitrary Amplitude Ion-Acoustic Double Layers in a Dusty Plasma * 1.2 Sheaths * Bounded Plasma Edge Physics as Observed from Simulations in 1D and 2D (Invited) * Control of RF Sheath Structure in RF Diode Discharge * Observation of Density Gradients with Fine Structures and Low Frequency Wave Excitation at the Plasma-Sheath Boundary * Double Sheath Associated with an Electron Emission to a Plasma Containing Negative Ions * Sheath Edge and Floating Potential for Multi-Species Plasmas Including Dust Particles * 1.3 Potential Structures and Oscillations * Potential Structure Formed at a Constriction of a DC He Positive Column and its Coupling with Ionization Wave * Potential Structure in a New RF Magnetron Device with a Hollow Electrode * Potential Disruption in a RF Afterglow Electronegative Plasma * Potential Oscillation in a Strongly Asymmetry RF Discharge Containing Negative Ions * Effects of External Potential Control on Coulomb Dust Behavior * Potential Structure of Carbon Arc Discharge for High-Yield Fullerenes Formation * Control of Axial and Radial Potential Profiles in Tandem Mirrors (Invited) * CHAPTER 2: FIELD-ALIGNED ELECTRIC FIELDS AND RELATED PARTICLE ACCELERATIONS * 2.1 Field-Aligned Potential Formation * Formation of Large Potential Difference in a Plasma Flow along Converging Magnetic Field Lines (Invited) * Presheath Formation in front of an Oblique End-Plate in a Magnetized Sheet Plasma * Plasma Potential Formation Due to ECRH in a Magnetic Well * Electrostatic

  14. Fabrication and characterization of short-period double-layer cross-grating with holographic lithography

    NASA Astrophysics Data System (ADS)

    Lin, Cunbao; Yan, Shuhua; You, Fusheng

    2017-01-01

    A cross-grating with short period and double layer is designed, and a method combining holographic lithography and lithography-etch-lithography-etch is proposed to manufacture it. The scalar diffraction theory and the rigorous coupled wave analysis are employed to analyze the diffraction characteristics of the double-layer cross-grating (DLCG). It reveals that the efficiencies of the (±1,±1) orders possess perfect complementarity under normal incidence. The equivalent high efficiency for TE and TM polarization can be realized which means the high signal-to-noise ratio and fringe contrast can be simultaneously achieved for heterodyne grating interferometers (HGIs). Furthermore, a gold-coated DLCG with grating pitch of 2 μm and pattern area of 60 mm×60 mm etched on the quartz substrate is fabricated with the proposed method. The displacement resolution, measurement range and long-term stability can be reliably guaranteed for HGIs with this grating. The characteristics of the DLCG are also experimentally tested and compared with the theoretical analysis. Reasonable consistency is obtained and the capabilities of both the DLCG and the fabrication method are verified.

  15. Heat transfer performance of a novel double-layer mini-channel heat sink

    NASA Astrophysics Data System (ADS)

    Tang, Biao; Zhou, Rui; Bai, Pengfei; Fu, Ting; Lu, Longsheng; Zhou, Guofu

    2017-03-01

    High pressure drop and significant non-uniformity in temperature distribution along the streamwise direction are still challenges to the design of mini-channel heat sink. High density mini-channel arrays with high liquid-wall contact area are usually pursued in a conventional single-layer design of heat sink, which also inevitably brings high pressure drop. A novel double-layer structured heat sink is proposed in this paper. Four heat sinks with various designs in mini-channel density and flow direction were fabricated and studied experimentally on the heat transfer performance. The single factor of heat load does not show obvious effect on the overall thermal resistance of the heat sinks. On the other hand, slight decrease in thermal resistance was found with the increase in heat load at high flow rates. Moreover, a computational fluid dynamics modeling work was conducted. The results indicate that the parallel cross-flow field regulated by the double-layer structure enhances the heat exchange in both horizontal and vertical directions and consequently gives an uniform temperature distribution and high heat transfer efficiency.

  16. Numerical well testing interpretation model and applications in crossflow double-layer reservoirs by polymer flooding.

    PubMed

    Yu, Haiyang; Guo, Hui; He, Youwei; Xu, Hainan; Li, Lei; Zhang, Tiantian; Xian, Bo; Du, Song; Cheng, Shiqing

    2014-01-01

    This work presents numerical well testing interpretation model and analysis techniques to evaluate formation by using pressure transient data acquired with logging tools in crossflow double-layer reservoirs by polymer flooding. A well testing model is established based on rheology experiments and by considering shear, diffusion, convection, inaccessible pore volume (IPV), permeability reduction, wellbore storage effect, and skin factors. The type curves were then developed based on this model, and parameter sensitivity is analyzed. Our research shows that the type curves have five segments with different flow status: (I) wellbore storage section, (II) intermediate flow section (transient section), (III) mid-radial flow section, (IV) crossflow section (from low permeability layer to high permeability layer), and (V) systematic radial flow section. The polymer flooding field tests prove that our model can accurately determine formation parameters in crossflow double-layer reservoirs by polymer flooding. Moreover, formation damage caused by polymer flooding can also be evaluated by comparison of the interpreted permeability with initial layered permeability before polymer flooding. Comparison of the analysis of numerical solution based on flow mechanism with observed polymer flooding field test data highlights the potential for the application of this interpretation method in formation evaluation and enhanced oil recovery (EOR).

  17. Vapor pressures of acetylene at low temperatures

    NASA Technical Reports Server (NTRS)

    Masterson, C. M.; Allen, John E., Jr.; Kraus, G. F.; Khanna, R. K.

    1990-01-01

    The atmospheres of many of the outer planets and their satellites contain a large number of hydrocarbon species. In particular, acetylene (C2H2) has been identified at Jupiter, Saturn and its satellite Titan, Uranus and Neptune. In the lower atmospheres of these planets, where colder temperatures prevail, the condensation and/or freezing of acetylene is probable. In order to obtain accurate models of the acetylene in these atmospheres, it is necessary to have a complete understanding of its vapor pressures at low temperatures. Vapor pressures at low temperatures for acetylene are being determined. The vapor pressures are measured with two different techniques in order to cover a wide range of temperatures and pressures. In the first, the acetylene is placed in a sample tube which is immersed in a low temperature solvent/liquid nitrogen slush bath whose temperature is measured with a thermocouple. The vapor pressure is then measured directly with a capacitance manometer. For lower pressures, a second technique which was called the thin-film infrared method (TFIR) was developed. It involves measuring the disappearance rate of a thin film of acetylene at a particular temperature. The spectra are then analyzed using previously determined extinction coefficient values, to determine the disappearance rate R (where R = delta n/delta t, the number of molecules that disappear per unit time). This can be related to the vapor pressure directly. This technique facilitates measurement of the lower temperatures and pressures. Both techniques have been calibrated using CO2, and have shown good agreement with the existing literature data.

  18. Low temperature elastic behavior of rocks

    NASA Astrophysics Data System (ADS)

    Ulrich, T. J.; Darling, T. W.; McCall, K. R.; Fenn, J.

    2002-12-01

    The resonant frequencies of a material sample are directly related to the elastic constants characterizing the sample. Thus, by studying trends in resonant frequencies as a function of temperature, the elastic behavior of the sample may be inferred, and changes in the physical properties of the material may be tracked (for example, phase changes). Historically, tracking the resonant frequencies of a crystalline sample as a function of temperature is one of the most sensitive methods for identifying phase changes in the sample. We are using Resonant Ultrasound Spectroscopy (RUS) to track the resonant frequencies of rock samples at low temperatures. Our initial measurements showed unexpected behavior in a millimeter-sized sample of Berea sandstone in the temperature range from 77 K to 300 K [Ulrich and Darling, 2001], including hysteresis in the temperature dependence of the resonant frequencies, and softening rather than hardening as the temperature decreases. A second experimental apparatus has been developed to make RUS measurements on samples up to 2 cm by 3 cm by 8 cm in size, and over the temperature range 77 K - 400 K. RUS measurements using the new experimental system have been made on several rock samples, as well as several standards, and will be described in this talk. In general, the rock samples exhibit anomalous elastic behavior, consistent with the initial measurements on much smaller samples. Similar elastic phenomena, with similar activation energies, are seen in these rocks in room temperature measurements of resonant frequency versus strain [Tencate and Shankland, 1996]. Thus, low temperature measurements could provide insight into the mechanisms for the nonlinear elastic behavior of rocks and other materials. Ulrich T.J., Darling T.W., Observation of anomalous elastic behavior in rock at low temperatures. Geophys. Res. Let., Vol. 28, No. 11, pgs. 2293-2296, June 1, 2001. Tencate J.A., Shankland, T.J., Slow dynamics in the nonlinear response of

  19. The development of low temperature curing adhesives

    NASA Technical Reports Server (NTRS)

    Green, H. E.; Sutherland, J. D.; Hom, J. M.; Sheppard, C. H.

    1975-01-01

    An approach for the development of a practical low temperature (293 K-311 K/68 F-100 F) curing adhesive system based on a family of amide/ester resins was studied and demonstrated. The work was conducted on resin optimization and adhesive compounding studies. An improved preparative method was demonstrated which involved the reaction of an amine-alcohol precursor, in a DMF solution with acid chloride. Experimental studies indicated that an adhesive formulation containing aluminum powder provided the best performance when used in conjunction with a commercial primer.

  20. Low-temperature heat transfer in nanowires.

    PubMed

    Glavin, B A

    2001-05-07

    A new regime of low-temperature heat transfer in suspended nanowires is predicted. It takes place when (i) only "acoustic" phonon modes of the wire are thermally populated and (ii) phonons are subject to the effective elastic scattering. Qualitatively, the main peculiarities of heat transfer originate due to the appearance of the flexural modes with high density of states in the wire phonon spectrum. They give rise to the T(1/2) temperature dependence of the wire thermal conductance. Experimental situations where the new regime is likely to be detected are discussed.

  1. Investigations of Low Temperature Time Dependent Cracking

    SciTech Connect

    Van der Sluys, W A; Robitz, E S; Young, B A; Bloom, J

    2002-09-30

    The objective of this project was to investigate metallurgical and mechanical phenomena associated with time dependent cracking of cold bent carbon steel piping at temperatures between 327 C and 360 C. Boiler piping failures have demonstrated that understanding the fundamental metallurgical and mechanical parameters controlling these failures is insufficient to eliminate it from the field. The results of the project consisted of the development of a testing methodology to reproduce low temperature time dependent cracking in laboratory specimens. This methodology was used to evaluate the cracking resistance of candidate heats in order to identify the factors that enhance cracking sensitivity. The resultant data was integrated into current available life prediction tools.

  2. Low temperature waste form process intensification

    SciTech Connect

    Fox, K. M.; Cozzi, A. D.; Hansen, E. K.; Hill, K. A.

    2015-09-30

    This study successfully demonstrated process intensification of low temperature waste form production. Modifications were made to the dry blend composition to enable a 50% increase in waste concentration, thus allowing for a significant reduction in disposal volume and associated costs. Properties measurements showed that the advanced waste form can be produced using existing equipment and processes. Performance of the waste form was equivalent or better than the current baseline, with approximately double the amount of waste incorporation. The results demonstrate the feasibility of significantly accelerating low level waste immobilization missions across the DOE complex and at environmental remediation sites worldwide.

  3. Ionometric determination of fluorides at low temperatures

    SciTech Connect

    Kostyukova, I.S.; Ennan, A.A.; Dzerzhko, E.K.; Leivikova, A.A.

    1995-12-01

    A method for determining fluoride ions in solution at low temperatures using a solid-contact fluorine-selective electrode (FSE) has been developed. The effect of temperature (60 to -15{degrees}C) on the calibration slope, potential equilibrium time, and operational stability is studied; the effect of an organic additive (cryoprotector) on the calibration slope is also studied. The temperature relationships obtained for the solid-contact FSEs allow appropriate corrections to be applied to the operational algorithm of the {open_quotes}Ftoring{close_quotes} hand-held semiautomatic HF gas analyzer for the operational temperature range of -16 to 60{degrees}C.

  4. Cryocoolers near their low-temperature limit

    NASA Astrophysics Data System (ADS)

    de Waele, A. T. A. M.

    2015-07-01

    This paper analyses the recently-observed temperature-time dependence in a GM-cooler near its low-temperature limit. The paper mainly focusses on GM-coolers with 4He as the working fluid, but some attention is also paid to pulse-tube refrigerators (PTR's) using 3He and many features of the treatment equally apply to Stirling coolers. Ample attention is paid to the thermodynamics of the cycle by considering the isentropes in the Tp-diagrams of 4He and 3He. The role of the line, where the thermal expansion coefficient is zero, is emphasized. Some fundamental thermodynamic relationships are derived.

  5. Low temperature photoresponse of monolayer tungsten disulphide

    SciTech Connect

    Cao, Bingchen; Shen, Xiaonan; Shang, Jingzhi; Cong, Chunxiao; Yang, Weihuang; Eginligil, Mustafa E-mail: meginligil@ntu.edu.sg; Yu, Ting E-mail: meginligil@ntu.edu.sg

    2014-11-01

    High photoresponse can be achieved in monolayers of transition metal dichalcogenides. However, the response times are inconveniently limited by defects. Here, we report low temperature photoresponse of monolayer tungsten disulphide prepared by exfoliation and chemical vapour deposition (CVD) method. The exfoliated device exhibits n-type behaviour; while the CVD device exhibits intrinsic behaviour. In off state, the CVD device has four times larger ratio of photoresponse for laser on/off and photoresponse decay–rise times are 0.1 s (limited by our setup), while the exfoliated device has few seconds. These findings are discussed in terms of charge trapping and localization.

  6. Measuring Contact Thermal Conductances at Low Temperatures

    NASA Technical Reports Server (NTRS)

    Salerno, Louis J.; Kittel, Peter; Brooks, Walter; Spivak, Alan L.; Marks, William G., Jr.

    1987-01-01

    Instrument measures thermal conductance of pressed contacts in liquid helium. Makes measurements automatically as function of force on pairs of brass samples having various surface finishes. Developed as part of effort to determine heat-transfer characteristics of bolted joints on cryogenically cooled focal planes in infrared equipment. Cylindrical chamber hangs from cover plate in bath of liquid helium. Inside chamber rocker arm applies controlled force to samples. Upper sample made slightly wider than lower one so two samples remain in complete contact even under slight lateral misalignment.

  7. Choosing a low-temperature sterilization technology.

    PubMed

    1999-11-01

    Low-temperature sterilization technologies are used instead of steam for sterilizing heat-sensitive or moisture-intolerant surgical equipment and supplies. In this Guidance Article, we describe several common alternatives, but we focus specifically on the two that have generated the most interest in recent years: ethylene oxide (EtO) and gas plasma sterilization. Ethylene oxide has been used as a low-temperature sterilization technology since the 1950s. Although EtO can be used safely, exposure to this gas is known to be a health hazard, and the emissions from certain EtO sterilizers are known to pollute the atmosphere. For these reasons, the use of EtO is regulated--more strictly in some regions than in others--and many healthcare facilities have decided to investigate alternative technologies. Gas plasma sterilization emerged in the 1990s as one promising alternative. This method appears to pose fewer health and environmental risks, and it offers faster turnaround times. However, this technology also has some limitations. We describe the advantages and disadvantages of both methods, along with the factors to consider when selecting from among these alternatives, in this Guidance Article.

  8. Innovative low temperature SOFCs and advanced materials

    NASA Astrophysics Data System (ADS)

    Zhu, B.; Yang, X. T.; Xu, J.; Zhu, Z. G.; Ji, S. J.; Sun, M. T.; Sun, J. C.

    High ionic conductivity, varying from 0.01 to 1 S cm -1 between 300 and 700 °C, has been achieved for the hybrid and nano-ceria-composite electrolyte materials, demonstrating a successful application for advanced low temperature solid oxide fuel cells (LTSOFCs). The LTSOFCs were constructed based on these new materials. The performance of 0.15-0.25 W cm -2 was obtained in temperature region of 320-400 °C for the ceria-carbonate composite electrolyte, and of 0.35-0.66 W cm -2 in temperature region of 500-600 °C for the ceria-lanthanum oxide composites. The cell could even function at as low as 200 °C. The cell has also undergone a life test for several months. A two-cell stack was studied, showing expected performance successfully. The excellent LTSOFC performance is resulted from both functional electrolyte and electrode materials. The electrolytes are two phase composite materials based on the oxygen ion and proton conducting phases, or two rare-earth oxides. The electrodes used were based on the same composite material system having excellent compatibility with the electrolyte. They are highly catalytic and conductive thus creating the excellent performances at low temperatures. These innovative LT materials and LTSOFC technologies would open the door for wide applications, not only for stationary but also for mobile power sources.

  9. Low Temperature Decomposition Rates for Tetraphenylborate Ion

    SciTech Connect

    Walker, D.D.

    1998-11-18

    Previous studies indicated that palladium is catalyzes rapid decomposition of alkaline tetraphenylborate slurries. Additional evidence suggest that Pd(II) reduces to Pd(0) during catalyst activation. Further use of tetraphenylborate ion in the decontamination of radioactive waste may require removal of the catalyst or cooling to temperatures at which the decomposition reaction proceeds slowly and does not adversely affect processing. Recent tests showed that tetraphenylborate did not react appreciably at 25 degrees Celsius over six months suggesting the potential to avoid the decomposition at low temperatures. The lack of reaction at low temperature could reflect very slow kinetics at the lower temperature, or may indicate a catalyst ''deactivation'' process. Previous tests in the temperature range 35 to 70 degrees Celsius provided a low precision estimate of the activation energy of the reaction with which to predict the rate of reaction at 25 percent Celsius. To understand the observations at 25 degrees Celsius, experiments must separate the catalyst activation step and the subsequent reaction with TPB. Tests described in this report represent an initial attempt to separate the two steps and determine the rate and activation energy of the reaction between active catalyst and TPB. The results of these tests indicate that the absence of reaction at 25 degrees Celsius was caused by failure to activate the catalyst or the presence of a deactivating mechanism. In the presence of activated catalyst, the decomposition reaction rate is significant.

  10. Antimisting kerosene: Low temperature degradation and blending

    NASA Technical Reports Server (NTRS)

    Yavrouian, A.; Parikh, P.; Sarohia, V.

    1988-01-01

    The inline filtration characteristics of freshly blended and degraded antimisting fuels (AMK) at low temperature are examined. A needle valve degrader was modified to include partial recirculation of degraded fuel and heat addition in the bypass loop. A pressure drop across the needle valve of up to 4,000 psi was used. The pressure drop across a 325 mesh filter screen placed inline with the degrader and directly downstream of the needle valve was measured as a function of time for different values of pressure drop across the needle valve. A volume flux of 1 gpm/sq in was employed based on the frontal area of the screen. It was found that, at ambient temperatures, freshly blended AMK fuel could be degraded using a single pass degradation at 4,000 psi pressure drop across the needle valve to give acceptable filterability performance. At fuel temperatures below -20 C, degradation becomes increasingly difficult and a single pass technique results in unacceptable filtration performance. Recirculation of a fraction of the degraded fuel and heat addition in the bypass loop improved low temperature degradation performance. The problem is addressed of blending the AMK additive with Jet A at various base fuel temperatures.

  11. Low temperature plasma sintering of silver nanoparticles

    NASA Astrophysics Data System (ADS)

    Ma, Siyuan; Bromberg, Vadim; Liu, Liang; Egitto, Frank D.; Chiarot, Paul R.; Singler, Timothy J.

    2014-02-01

    The fabrication of flexible electronics using the deposition of solution-processed nanomaterials generally requires low-temperature post-processing to optimize functionality. We studied sintering of silver nanoparticle (AgNP) films on glass substrates by applying argon (Ar) plasma to achieve improved electrical conductivity. This process meets the low temperature processing requirements for standard low-cost polymeric flexible substrates. The relationship between plasma parameters (such as power and sintering time) versus sintering results (such as electrical sheet resistance, sintered structure depth, materials composition variation, and film nanostructure) is reported for 23 and 77 nm diameter AgNPs. In addition, plasma processing typically induces a small surface thermal effect. We monitored the surface temperatures of the AgNP films in-situ during plasma sintering. By sintering control groups at these monitored surface temperatures using a vacuum oven, we confirmed that the resistivity due to plasma sintering is less than that produced by thermal sintering. Our data show that, the measured lowest resistivities for plasma sintered AgNP films are about only 5 and 12 times greater than the bulk Ag resistivity for 23 and 77 nm, respectively.

  12. Low temperature alteration processes affecting ultramafic bodies

    USGS Publications Warehouse

    Nesbitt, H.W.; Bricker, O.P.

    1978-01-01

    At low temperatures, in the presence of an aqueous solution, olivine and orthopyroxene are not stable relative to the hydrous phases brucite, serpentine and talc. Alteration of dunite and peridotite to serpentine or steatite bodies must therefore proceed via non-equilibrium processes. The compositions of natural solutions emanating from dunites and peridotites demonstrate that the dissolution of forsterite and/or enstatite is rapid compared with the precipitation of the hydrous phases; consequently, dissolution of anhydrous minerals controls the chemistry of such solutions. In the presence of an aqueous phase, precipitation of hydrous minerals is the rate-controlling step. Brucite-bearing and -deficient serpentinites alter at low temperature by non-equilibrium processes, as evidenced by the composition of natural solutions from these bodies. The solutions approach equilibrium with the least stable hydrous phase and, as a consequence, are supersaturated with other hydrous phases. Dissolution of the least stable phase is rapid compared to precipitation of other phases, so that the dissolving mineral controls the solution chemistry. Non-equilibrium alteration of anhydrous ultramafic bodies continues until at least one anhydrous phase equilibrates with brucite, chrysotile or talc. The lowest temperature (at a given pressure) at which this happens is defined by the reaction: 3H2O + 2Mg2SiO4 ??? Mg3Si2O5(OH)4 + Mg(OH)2 (Johannes, 1968, Contrib. Mineral. Petrol. 19, 309-315) so that non-equilibrium alteration may occur well into greenschist facies metamorphic conditions. ?? 1978.

  13. Efficient prepreg recycling at low temperatures

    NASA Astrophysics Data System (ADS)

    Pannkoke, Kord; Oethe, Marcus; Busse, Jürgen

    When manufacturing fibre reinforced plastics engineers are still confronted with a lack of experience concerning efficient recycling methods for prepreg cutting waste. Normally, the prepregs are cured and subsequently milled to use them as a filler material for polymers. However, this method is expensive and it is difficult to find applications for the milled FRP. An alternative method to recycle CFRP prepregs will be presented in this paper. Cutting the uncured prepreg waste was done by means of a saw mill which was cooled down to low temperatures. Working temperatures of -30°C are sufficient to harden the uncured resin and to achieve cuttable prepregs. Furthermore, post-curing during the cutting process is avoided with this technique. The result is a `cotton'-like matted structure with random fibre orientation and fibre length distribution. Subsequent curing was done by means of a press and an autoclave, respectively. It will be shown by means of tension and bending tests that low-temperature cutting of uncured prepregs is a way to partly conserve the high valuation of FRP during recycling. Furthermore, it offers possibilities for various applications.

  14. Double Layers in Expanding Plasmas and Their Relevance to the Auroral Plasma Processes

    NASA Technical Reports Server (NTRS)

    Singh, Nagendra; Khazanov, George

    2003-01-01

    When a dense plasma consisting of a cold and a sufficiently warm electron population expands, a rarefaction shock forms [Bezzerides et al., 1978]. In the expansion of the polar wind in the magnetosphere, it has been previously shown that when a sufficiently warm electron population also exists, in addition to the usual cold ionospheric one, a discontinuity forms in the electrostatic potential distribution along the magnetic field lines [Barakat and Schunk, 1984]. Despite the lack of spatial resolution and the assumption of quasi-neutrality in the polar wind models, such discontinuities have been called double layers (DLs). Recently similar discontinuities have been invoked to partly explain the auroral acceleration of electrons and ions in the upward current region [Ergun et al., 2000]. By means of one-dimensional Vlasov simulations of expanding plasmas, for the first time we make here the connection between (1) the rarefaction shocks, (2) the discontinuities in the potential distributions, and (3) DLs. We show that when plasmas expand from opposite directions into a deep density cavity with a potential drop across it and when the plasma on the high-potential side contains hot and cold electron populations, the temporal evolution of the potential and the plasma distribution generates evolving multiple double layers with an ,extended density cavity between them. One of the DLs is the rarefaction-shock (RFS) and it forms by the reflections of the cold electrons coming from the high-potential side; it supports a part of the potential drop approximately determined by the hot electron temperature. The other DLs evolve from charge separations arising either from reflection of ions coming from the low-potential side or stemming from plasma instabilities; they support the rest of the potential drop. The instabilities forming these additional double layers involve electron-ion (e-i) Buneman or ion-ion (i-i) two-stream interactions. The electron-electron two

  15. The Low Temperature Microgravity Physics Experiments Project

    NASA Technical Reports Server (NTRS)

    Holmes, Warren; Lai, Anthony; Croonquist, Arvid; Chui, Talso; Eraker, J. H.; Abbott, Randy; Mills, Gary; Mohl, James; Craig, James; Balachandra, Balu; Gannon, Jade

    2000-01-01

    The Low Temperature Microgravity Physics Facility (LTMPF) is being developed by NASA to provide long duration low temperature and microgravity environment on the International Space Station (ISS) for performing fundamental physics investigations. Currently, six experiments have been selected for flight definition studies. More will be selected in a two-year cycle, through NASA Research Announcement. This program is managed under the Low Temperature Microgravity Physics Experiments Project Office at the Jet Propulsion Laboratory. The facility is being designed to launch and returned to earth on a variety of vehicles including the HII-A and the space shuttle. On orbit, the facility will be connected to the Exposed Facility on the Japanese Experiment Module, Kibo. Features of the facility include a cryostat capable of maintaining super-fluid helium at a temperature of 1.4 K for 5 months, resistance thermometer bridges, multi-stage thermal isolation system, thermometers capable of pico-Kelvin resolution, DC SQUID magnetometers, passive vibration isolation, and magnetic shields with a shielding factor of 80dB. The electronics and software architecture incorporates two VME buses run using the VxWorks operating system. Technically challenging areas in the design effort include the following: 1) A long cryogen life that survives several launch and test cycles without the need to replace support straps for the helium tank. 2) The minimization of heat generation in the sample stage caused by launch vibration 3) The design of compact and lightweight DC SQUID electronics. 4) The minimization of RF interference for the measurement of heat at pico-Watt level. 5) Light weighting of the magnetic shields. 6) Implementation of a modular and flexible electronics and software architecture. The first launch is scheduled for mid-2003, on an H-IIA Rocket Transfer Vehicle, out of the Tanegashima Space Center of Japan. Two identical facilities will be built. While one facility is onboard

  16. Radically Different Kinetics at Low Temperatures

    NASA Astrophysics Data System (ADS)

    Sims, Ian

    2014-06-01

    The use of the CRESU (Cinétique de Réaction en Ecoulement Supersonique Uniforme, or Reaction Kinetics in Uniform Supersonic Flow) technique coupled with pulsed laser photochemical kinetics methods has shown that reactions involving radicals can be very rapid at temperatures down to 10 K or below. The results have had a major impact in astrochemistry and planetology, as well as proving an exacting test for theory. The technique has also been applied to the formation of transient complexes of interest both in atmospheric chemistry and combustion. Until now, all of the chemical reactions studied in this way have taken place on attractive potential energy surfaces with no overall barrier to reaction. The F + H2 {→} HF + H reaction does possess a substantial energetic barrier ({\\cong} 800 K), and might therefore be expected to slow to a negligible rate at very low temperatures. In fact, this H-atom abstraction reaction does take place efficiently at low temperatures due entirely to tunneling. I will report direct experimental measurements of the rate of this reaction down to a temperature of 11 K, in remarkable agreement with state-of-the-art quantum reactive scattering calculations by François Lique (Université du Havre) and Millard Alexander (University of Maryland). It is thought that long chain cyanopolyyne molecules H(C2)nCN may play an important role in the formation of the orange haze layer in Titan's atmosphere. The longest carbon chain molecule observed in interstellar space, HC11N, is also a member of this series. I will present new results, obtained in collaboration with Jean-Claude Guillemin (Ecole de Chimie de Rennes) and Stephen Klippenstein (Argonne National Labs), on reactions of C2H, CN and C3N radicals (using a new LIF scheme by Hoshina and Endo which contribute to the low temperature formation of (cyano)polyynes. H. Sabbah, L. Biennier, I. R. Sims, Y. Georgievskii, S. J. Klippenstein, I. W. M. Smith, Science 317, 102 (2007). S. D. Le Picard, M

  17. Low Temperature Waste Immobilization Testing Vol. I

    SciTech Connect

    Russell, Renee L.; Schweiger, Michael J.; Westsik, Joseph H.; Hrma, Pavel R.; Smith, D. E.; Gallegos, Autumn B.; Telander, Monty R.; Pitman, Stan G.

    2006-09-14

    The Pacific Northwest National Laboratory (PNNL) is evaluating low-temperature technologies to immobilize mixed radioactive and hazardous waste. Three waste forms—alkali-aluminosilicate hydroceramic cement, “Ceramicrete” phosphate-bonded ceramic, and “DuraLith” alkali-aluminosilicate geopolymer—were selected through a competitive solicitation for fabrication and characterization of waste-form properties. The three contractors prepared their respective waste forms using simulants of a Hanford secondary waste and Idaho sodium bearing waste provided by PNNL and characterized their waste forms with respect to the Toxicity Characteristic Leaching Procedure (TCLP) and compressive strength. The contractors sent specimens to PNNL, and PNNL then conducted durability (American National Standards Institute/American Nuclear Society [ANSI/ANS] 16.1 Leachability Index [LI] and modified Product Consistency Test [PCT]) and compressive strength testing (both irradiated and as-received samples). This report presents the results of these characterization tests.

  18. Low-temperature geothermal resources of Washington

    SciTech Connect

    Schuster, J.E.; Bloomquist, R.G.

    1994-06-01

    This report presents information on the location, physical characteristics, and water chemistry of low-temperature geothermal resources in Washington. The database includes 941 thermal (>20C or 68F) wells, 34 thermal springs, lakes, and fumaroles, and 238 chemical analyses. Most thermal springs occur in the Cascade Range, and many are associated with stratovolcanoes. In contrast, 97 percent of thermal wells are located in the Columbia Basin of southeastern Washington. Some 83.5 percent are located in Adams, Benton, Franklin, Grant, Walla Walla, and Yakima Counties. Yakima County, with 259 thermal wells, has the most. Thermal wells do not seem to owe their origin to local sources of heat, such as cooling magma in the Earth`s upper crust, but to moderate to deep circulation of ground water in extensive aquifers of the Columbia River Basalt Group and interflow sedimentary deposits, under the influence of a moderately elevated (41C/km) average geothermal gradient.

  19. Low Temperature SQUID for NDE Applications

    NASA Technical Reports Server (NTRS)

    Wincheski, Buzz (Technical Monitor); Selim, Raouf

    2003-01-01

    We have developed a low temperature SuperConducting Quantum Interference Device - SQUID measurement system for detection of defects deep under the surface of aluminum structures using eddy current techniques. The system uses a two dimensional planar inducer with two different excitation frequencies to induce a current in the sample. We have developed a data analysis software program that enabled us to distinguish between round defects (holes), straight defects (slots) and slots close to holes simulating cracks starting from rivets in aluminum structures. We were able to detect defects that are 8mm below the surface. We have also measured the change in phase of the detected signal as a function of depth of the defect. This relationship can be used to determine the depth of hidden flaws. Using this analysis software with the high temperature SQUID system at NASA Langley we were able to detect slots close to holes in layered aluminum sample.

  20. Magnetic refrigeration for low-temperature applications

    NASA Technical Reports Server (NTRS)

    Barclay, J. A.

    1985-01-01

    The application of refrigeration at low temperatures ranging from production of liquid helium for medical imaging systems to cooling of infrared sensors on surveillance satellites is discussed. Cooling below about 15 K with regenerative refrigerators is difficult because of the decreasing thermal mass of the regenerator compared to that of the working material. In order to overcome this difficulty with helium gas as the working material, a heat exchanger plus a Joule-Thomson or other exponder is used. Regenerative magnetic refrigerators with magnetic solids as the working material have the same regenerator problem as gas refrigerators. This problem provides motivation for the development of nonregenerative magnetic refrigerators that span approximately 1 K to approximately 0 K. Particular emphasis is placed on high reliability and high efficiency. Calculations indicate considerable promise in this area. The principles, the potential, the problems, and the progress towards development of successful 4 to 20 K magnetic refrigerators are discussed.

  1. Evaluation of Low Temperature CO Removal Catalysts

    NASA Technical Reports Server (NTRS)

    Monje, Oscar

    2015-01-01

    CO removal from spacecraft gas streams was evaluated for three commercial, low temperature oxidation catalysts: Carulite 300, Sofnocat 423, and Hamilton Sundstrand Pt1. The catalysts were challenged with CO concentrations (1-100 ppm) under dry and wet (50% humidity) conditions using 2-3 % O2. CO removal and CO2 concentration were measured at constant feed composition using a FTIR. Water vapor affected the CO conversion of each catalyst differently. An initial screening found that Caulite 300 could not operate in humid conditions. The presence of water vapor affected CO conversion of Sofnocat 423 for challenge concentrations below 40 ppm. The conversion of CO by Sofnocat 423 was 80% at CO concentrations greater than 40 ppm under both dry and moist conditions. The HS Pt1 catalyst exhibited CO conversion levels of 100% under both dry and moist conditions.

  2. Low temperature catalyst system for methanol production

    DOEpatents

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.

    1984-04-20

    This patent discloses a catalyst and process useful at low temperatures (150/sup 0/C) and preferably in the range 80 to 120/sup 0/C used in the production of methanol from carbon monoxide and hydrogen. The catalyst components are used in slurry form and comprise (1) a complex reducing agent derived from the component structure NaH-ROH-M(OAc)/sub 2/ where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1 to 6 carbon atoms and (2) a metal carbonyl of a group VI (Mo, Cr, W) metal. For the first component, Nic is preferred (where M = Ni and R = tertiary amyl). For the second component, Mo(CO)/sub 6/ is preferred. The mixture is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  3. Low temperature catalysts for methanol production

    DOEpatents

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1986-09-30

    A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1--6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  4. REFRIGERATION ESPECIALLY FOR VERY LOW TEMPERATURES

    DOEpatents

    Kennedy, P.B.; Smith, H.R. Jr.

    1960-09-13

    A refrigeration system for producing very low temperatures is described. The system of the invention employs a binary mixture refrigerant in a closed constant volume, e.g., Freon and ethylene. Such mixture is compressed in the gaseous state and is then separated in a fractionating column element of the system. Thenceforth, the first liquid to separate is employed stagewise to cool and liq uefy successive portions of the refrigerant at successively lower temperatures by means of heat exchangers coupled between the successive stages. When shut down, all of the volumes of the system are interconnected and a portion of the refrigerant remains liquid at ambient temperatures so that no dangerous overpressures develop. The system is therefore rugged, simple and dependable in operation.

  5. Low-temperature gas from marine shales

    PubMed Central

    2009-01-01

    Thermal cracking of kerogens and bitumens is widely accepted as the major source of natural gas (thermal gas). Decomposition is believed to occur at high temperatures, between 100 and 200°C in the subsurface and generally above 300°C in the laboratory. Although there are examples of gas deposits possibly generated at lower temperatures, and reports of gas generation over long periods of time at 100°C, robust gas generation below 100°C under ordinary laboratory conditions is unprecedented. Here we report gas generation under anoxic helium flow at temperatures 300° below thermal cracking temperatures. Gas is generated discontinuously, in distinct aperiodic episodes of near equal intensity. In one three-hour episode at 50°C, six percent of the hydrocarbons (kerogen & bitumen) in a Mississippian marine shale decomposed to gas (C1–C5). The same shale generated 72% less gas with helium flow containing 10 ppm O2 and the two gases were compositionally distinct. In sequential isothermal heating cycles (~1 hour), nearly five times more gas was generated at 50°C (57.4 μg C1–C5/g rock) than at 350°C by thermal cracking (12 μg C1–C5/g rock). The position that natural gas forms only at high temperatures over geologic time is based largely on pyrolysis experiments under oxic conditions and temperatures where low-temperature gas generation could be suppressed. Our results indicate two paths to gas, a high-temperature thermal path, and a low-temperature catalytic path proceeding 300° below the thermal path. It redefines the time-temperature dimensions of gas habitats and opens the possibility of gas generation at subsurface temperatures previously thought impossible. PMID:19236698

  6. Low-temperature gas from marine shales.

    PubMed

    Mango, Frank D; Jarvie, Daniel M

    2009-02-23

    Thermal cracking of kerogens and bitumens is widely accepted as the major source of natural gas (thermal gas). Decomposition is believed to occur at high temperatures, between 100 and 200 degrees C in the subsurface and generally above 300 degrees C in the laboratory. Although there are examples of gas deposits possibly generated at lower temperatures, and reports of gas generation over long periods of time at 100 degrees C, robust gas generation below 100 degrees C under ordinary laboratory conditions is unprecedented. Here we report gas generation under anoxic helium flow at temperatures 300 degrees below thermal cracking temperatures. Gas is generated discontinuously, in distinct aperiodic episodes of near equal intensity. In one three-hour episode at 50 degrees C, six percent of the hydrocarbons (kerogen & bitumen) in a Mississippian marine shale decomposed to gas (C1-C5). The same shale generated 72% less gas with helium flow containing 10 ppm O2 and the two gases were compositionally distinct. In sequential isothermal heating cycles (approximately 1 hour), nearly five times more gas was generated at 50 degrees C (57.4 microg C1-C5/g rock) than at 350 degrees C by thermal cracking (12 microg C1-C5/g rock). The position that natural gas forms only at high temperatures over geologic time is based largely on pyrolysis experiments under oxic conditions and temperatures where low-temperature gas generation could be suppressed. Our results indicate two paths to gas, a high-temperature thermal path, and a low-temperature catalytic path proceeding 300 degrees below the thermal path. It redefines the time-temperature dimensions of gas habitats and opens the possibility of gas generation at subsurface temperatures previously thought impossible.

  7. Reciprocity in spatial evolutionary public goods game on double-layered network

    PubMed Central

    Kim, Jinho; Yook, Soon-Hyung; Kim, Yup

    2016-01-01

    Spatial evolutionary games have mainly been studied on a single, isolated network. However, in real world systems, many interaction topologies are not isolated but many different types of networks are inter-connected to each other. In this study, we investigate the spatial evolutionary public goods game (SEPGG) on double-layered random networks (DRN). Based on the mean-field type arguments and numerical simulations, we find that SEPGG on DRN shows very rich interesting phenomena, especially, depending on the size of each layer, intra-connectivity, and inter-connected couplings, the network reciprocity of SEPGG on DRN can be drastically enhanced through the inter-connected coupling. Furthermore, SEPGG on DRN can provide a more general framework which includes the evolutionary dynamics on multiplex networks and inter-connected networks at the same time. PMID:27503801

  8. Enhancement of proton acceleration field in laser double-layer target interaction

    SciTech Connect

    Gu, Y. J.; Kong, Q.; Li, X. F.; Yu, Q.; Wang, P. X.; Kawata, S.; Izumiyama, T.; Ma, Y. Y.

    2013-07-15

    A mechanism is proposed to enhance a proton acceleration field in laser plasma interaction. A double-layer plasma with different densities is illuminated by an intense short pulse. Electrons are accelerated to a high energy in the first layer by the wakefield. The electrons accelerated by the laser wakefield induce the enhanced target normal sheath (TNSA) and breakout afterburner (BOA) accelerations through the second layer. The maximum proton energy reaches about 1 GeV, and the total charge with an energy higher than 100 MeV is about several tens of μC/μm. Both the acceleration gradient and laser energy transfer efficiency are higher than those in single-target-based TNSA or BOA. The model has been verified by 2.5D-PIC simulations.

  9. Enhancement of proton acceleration field in laser double-layer target interaction

    NASA Astrophysics Data System (ADS)

    Gu, Y. J.; Kong, Q.; Kawata, S.; Izumiyama, T.; Li, X. F.; Yu, Q.; Wang, P. X.; Ma, Y. Y.

    2013-07-01

    A mechanism is proposed to enhance a proton acceleration field in laser plasma interaction. A double-layer plasma with different densities is illuminated by an intense short pulse. Electrons are accelerated to a high energy in the first layer by the wakefield. The electrons accelerated by the laser wakefield induce the enhanced target normal sheath (TNSA) and breakout afterburner (BOA) accelerations through the second layer. The maximum proton energy reaches about 1 GeV, and the total charge with an energy higher than 100 MeV is about several tens of μC/μm. Both the acceleration gradient and laser energy transfer efficiency are higher than those in single-target-based TNSA or BOA. The model has been verified by 2.5D-PIC simulations.

  10. Simulation of diffuse-charge capacitance in electric double layer capacitors

    NASA Astrophysics Data System (ADS)

    Sun, Ning; Gersappe, Dilip

    2017-01-01

    We use a Lattice Boltzmann Model (LBM) in order to simulate diffuse-charge dynamics in Electric Double Layer Capacitors (EDLCs). Simulations are carried out for both the charge and the discharge processes on 2D systems of complex random electrode geometries (pure random, random spheres and random fibers). The steric effect of concentrated solutions is considered by using a Modified Poisson-Nernst-Planck (MPNP) equations and compared with regular Poisson-Nernst-Planck (PNP) systems. The effects of electrode microstructures (electrode density, electrode filler morphology, filler size, etc.) on the net charge distribution and charge/discharge time are studied in detail. The influence of applied potential during discharging process is also discussed. Our studies show how electrode morphology can be used to tailor the properties of supercapacitors.

  11. Free energy of electrical double layers: Entropy of adsorbed ions and the binding polynomial

    SciTech Connect

    Stigter, D.; Dill, K.A. )

    1989-09-07

    The authors adapt the method of binding polynomials to general problems of binding equilibria of ions to polybases, polyacids, and mixed polyelectrolytes, such as proteins and other colloids. For spherical particles with a smeared charge the interaction effects are taken into account using the Poisson-Boltzmann equation, which is shown to differ little from the Debye-Hueckel approximation under conditions met in most protein solutions. Examples are given of the salt dependence of pH titration equilibria. Binding polynomials produce an extra term in the free energy of the electrical double layer, which arises from the entropy of the adsorbed ions. The maximum term method applied to the binding polynominal yields an expression which is similar to that derived by the charging process of Chan and Mitchell. Applications to monolayers and to polyelectrolyte gels are also discussed.

  12. Role of nonthermal electrons on dust ion acoustic double layer with variable dust charge

    NASA Astrophysics Data System (ADS)

    Borah, Prathana; Gogoi, Deepshikha; Das, Nilakshi

    2016-01-01

    The presence of nonthermal electron may play an important role in the formation of nonlinear structures in plasma. On the other hand, fluctuation of dust charge is an important and unique feature of complex plasma and it gives rise to a dissipative effect in the system leading to the formation of nonlinear structures due to the balance between nonlinearity and dissipation. In this paper, the propagation of nonlinear dust ion acoustic (DIA) wave in unmagnetized collisionless dusty plasma consisting of ions, nonthermal electrons and dust grains with variable negative charge has been investigated using the Sagdeev potential method. The existence domain of rarefactive double layer (DL) in the DIA wave has been investigated for the range of plasma parameters. The real potential has been obtained by numerically solving the Poisson equation and dust charging equation. It is observed that the presence of nonthermal electrons strengthens the DIA DL.

  13. A double-layer based model of ion confinement in electron cyclotron resonance ion source

    SciTech Connect

    Mascali, D. Neri, L.; Celona, L.; Castro, G.; Gammino, S.; Ciavola, G.; Torrisi, G.; Sorbello, G.

    2014-02-15

    The paper proposes a new model of ion confinement in ECRIS, which can be easily generalized to any magnetic configuration characterized by closed magnetic surfaces. Traditionally, ion confinement in B-min configurations is ascribed to a negative potential dip due to superhot electrons, adiabatically confined by the magneto-static field. However, kinetic simulations including RF heating affected by cavity modes structures indicate that high energy electrons populate just a thin slab overlapping the ECR layer, while their density drops down of more than one order of magnitude outside. Ions, instead, diffuse across the electron layer due to their high collisionality. This is the proper physical condition to establish a double-layer (DL) configuration which self-consistently originates a potential barrier; this “barrier” confines the ions inside the plasma core surrounded by the ECR surface. The paper will describe a simplified ion confinement model based on plasma density non-homogeneity and DL formation.

  14. Electrical Double Layer Capacitance in a Graphene-embedded Al2O3 Gate Dielectric

    PubMed Central

    Ki Min, Bok; Kim, Seong K.; Jun Kim, Seong; Ho Kim, Sung; Kang, Min-A; Park, Chong-Yun; Song, Wooseok; Myung, Sung; Lim, Jongsun; An, Ki-Seok

    2015-01-01

    Graphene heterostructures are of considerable interest as a new class of electronic devices with exceptional performance in a broad range of applications has been realized. Here, we propose a graphene-embedded Al2O3 gate dielectric with a relatively high dielectric constant of 15.5, which is about 2 times that of Al2O3, having a low leakage current with insertion of tri-layer graphene. In this system, the enhanced capacitance of the hybrid structure can be understood by the formation of a space charge layer at the graphene/Al2O3 interface. The electrical properties of the interface can be further explained by the electrical double layer (EDL) model dominated by the diffuse layer. PMID:26530817

  15. Simulation of electric double-layer capacitors: evaluation of constant potential method

    NASA Astrophysics Data System (ADS)

    Wang, Zhenxing; Laird, Brian; Yang, Yang; Olmsted, David; Asta, Mark

    2014-03-01

    Atomistic simulations can play an important role in understanding electric double-layer capacitors (EDLCs) at a molecular level. In such simulations, typically the electrode surface is modeled using fixed surface charges, which ignores the charge fluctuation induced by local fluctuations in the electrolyte solution. In this work we evaluate an explicit treatment of charges, namely constant potential method (CPM)[1], in which the electrode charges are dynamically updated to maintain constant electrode potential. We employ a model system with a graphite electrode and a LiClO4/acetonitrile electrolyte, examined as a function of electrode potential differences. Using various molecular and macroscopic properties as metrics, we compare CPM simulations on this system to results using fixed surface charges. Specifically, results for predicted capacity, electric potential gradient and solvent density profile are identical between the two methods; However, ion density profiles and solvation structure yield significantly different results.

  16. Ion acceleration enhanced by additional neutralizing electrons in a magnetically expanding double layer plasma

    SciTech Connect

    Takahashi, Kazunori; Fujiwara, Tamiya

    2010-10-15

    Electrons neutralizing an ion beam are additionally supplied to a magnetically expanding double layer (DL) plasma from the downstream side of the DL. The rf power and the argon gas pressure are maintained at 200 W and 55 mPa, respectively, and the source magnetic field is varied in the range of about 70-550 G. It is observed that the ion beam energy corresponding to the DL potential drop increases up to 30 eV with an increase in the magnetic field when supplying the additional electrons, while it saturates at 20 eV for the case of the absence of the additional electrons. The supplied electrons are believed to be an energy source for the DL such that increasing the magnetic field is able to increase the potential drop beyond the limit found in the absence of the supplied electrons.

  17. Spreading of Electrolyte Drops on Charged Surfaces: Electric Double Layer Effects on Drop Dynamics

    NASA Astrophysics Data System (ADS)

    Bae, Kyeong; Sinha, Shayandev; Chen, Guang; Das, Siddhartha

    2015-11-01

    Drop spreading is one of the most fundamental topics of wetting. Here we study the spreading of electrolyte drops on charged surfaces. The electrolyte solution in contact with the charged solid triggers the formation of an electric double layer (EDL). We develop a theory to analyze how the EDL affects the drop spreading. The drop dynamics is studied by probing the EDL effects on the temporal evolution of the contact angle and the base radius (r). The EDL effects are found to hasten the spreading behaviour - this is commensurate to the EDL effects causing a ``philic'' tendency in the drops (i.e., drops attaining a contact angle smaller than its equilibrium value), as revealed by some of our recent papers. We also develop scaling laws to illustrate the manner in which the EDL effects make the r versus time (t) variation deviate from the well known r ~tn variation, thereby pinpointing the attainment of different EDL-mediated spreading regimes.

  18. Shock waves and double layers in a quantum electron-positron-ion plasma

    NASA Astrophysics Data System (ADS)

    Dip, P. R.; Hossen, M. A.; Salahuddin, M.; Mamun, A. A.

    2016-02-01

    The ion-acoustic (IA) shock waves and double layers (DLs) in an unmagnetized, dissipative, quantum electron-positron-ion (EPI) plasma (composed of a viscous heavy ion fluid, Fermi electrons and positrons) have been theoretically investigated. The higher-order Burgers and Gardner equations are derived by employing the reductive perturbation method. The basic features of the IA shock waves and the DLs are identified by analyzing the solutions of both the higher-order Burgers and Gardner equations. The ratio of the Fermi temperature of the positron to that of the electron, the Fermi pressure of electrons and positrons, the viscous force, the plasma particle number densities, etc. are found to change remarkably the basic features (viz. amplitude, width, phase speed, etc.) of the IA waves. The results of our investigation may be helpful in understanding the nonlinear features of localized IA waves propagating in quantum EPI plasmas which are ubiquitous in astrophysical, as well as laboratory, environments.

  19. Double layer electric fields aiding the production of superthermal electrons within magnetic reconnection exhausts

    NASA Astrophysics Data System (ADS)

    Egedal, Jan; Daughton, William; Le, Ari

    2015-11-01

    Using a kinetic simulation of magnetic reconnection it was recently shown that parallel electric fields (E∥) can be present over large spatial scales in reconnection exhausts. The largest values of E∥ are observed within double layers, which form through large parallel streaming of electrons into the reconnection region. The electron confinement, provided in part by the structure in E∥, allows sustained energization by perpendicular electric fields (E⊥). The energization is a consequence of the confined electrons' chaotic orbital motion that includes drifts aligned with the reconnection electric field. The mechanism is effective in an extended region of the reconnection exhaust allowing for the generation of superthermal electrons in reconnection scenarios, including those with only a single x-line. The numerical and analytical results agree with detailed spacecraft observations recorded during reconnection events in the Earth's magnetotail. Supported by NSF GEM award 1405166 and NASA grant NNX14AC68G.

  20. Double-layer mediated electromechanical response of amyloid fibrils in liquid environment.

    PubMed

    Nikiforov, M P; Thompson, G L; Reukov, V V; Jesse, S; Guo, S; Rodriguez, B J; Seal, K; Vertegel, A A; Kalinin, S V

    2010-02-23

    Harnessing electrical bias-induced mechanical motion on the nanometer and molecular scale is a critical step toward understanding the fundamental mechanisms of redox processes and implementation of molecular electromechanical machines. Probing these phenomena in biomolecular systems requires electromechanical measurements be performed in liquid environments. Here we demonstrate the use of band excitation piezoresponse force microscopy for probing electromechanical coupling in amyloid fibrils. The approaches for separating the elastic and electromechanical contributions based on functional fits and multivariate statistical analysis are presented. We demonstrate that in the bulk of the fibril the electromechanical response is dominated by double-layer effects (consistent with shear piezoelectricity of biomolecules), while a number of electromechanically active hot spots possibly related to structural defects are observed.

  1. Performance of Liquid Phase Exfoliated Graphene As Electrochemical Double Layer Capacitors Electrodes

    NASA Astrophysics Data System (ADS)

    Huffstutler, Jacob; Wasala, Milinda; Richie, Julianna; Winchester, Andrew; Ghosh, Sujoy; Kar, Swastik; Talapatra, Saikat

    2014-03-01

    We will present the results of our investigations of electrochemical double layer capacitors (EDLCs) or supercapacitors (SC) fabricated using liquid-phase exfoliated graphene. Several electrolytes, such as aqueous potassium hydroxide KOH (6M), ionic 1-Butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6], and ionic 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate[BMP][FAP] were used. These EDLC's show good performance compared to other carbon nanomaterials based EDLC's devices. We found that the liquid phase exfoliated graphene based devices possess specific capacitance values as high as 262 F/g, when used with ionic liquid electrolyte[BMP][FAP], with power densities (~ 454 W/kg) and energy densities (~ 0.38Wh/kg). Further, these devices indicated rapid charge transfer response even without the use of any binders or specially prepared current collectors. A detailed electrochemical impedance spectroscopy analysis in order to understand the phenomenon of charge storage in these materials will be presented.

  2. A Study on Equivalent Circuit Model of High-Power Density Electric Double Layer Capacitor

    NASA Astrophysics Data System (ADS)

    Yamada, Tetsu; Yamashiro, Susumu; Sasaki, Masakazu; Araki, Shuuichi

    Various models for the equivalent circuit of EDLC (Electric Double Layer Capacitor) have been presented so far. The multi-stage connection of RC circuit is a representative model to simulate the EDLC's charge-discharge characteristic. However, since high energy density type EDLC for electric power storage has the electrostatic capacity of thousands F, the phenomenon of being almost uninfluential for the case of conventional capacitor appears in an actual measurement notably. To overcome this difficulty, we develop an equivalent circuit model using a nonlinear model that considers the voltage dependency of the electrostatic capacity in this paper. After various simulations and comparison with experimental results, we confirmed the effectiveness of the proposed model.

  3. Carbon-Nanotube-Based Electrochemical Double-Layer Capacitor Technologies for Spaceflight Applications

    NASA Technical Reports Server (NTRS)

    Arepalli, S.; Fireman, H.; Huffman, C.; Maloney, P.; Nikolaev, P.; Yowell, L.; Kim, K.; Kohl, P. A.; Higgins, C. D.; Turano, S. P.

    2005-01-01

    Electrochemical double-layer capacitors, or supercapacitors, have tremendous potential as high-power energy sources for use in low-weight hybrid systems for space exploration. Electrodes based on single-wall carbon nanotubes (SWCNTs) offer exceptional power and energy performance due to the high surface area, high conductivity, and the ability to functionalize the SWCNTs to optimize capacitor properties. This paper will report on the preparation of electrochemical capacitors incorporating SWCNT electrodes and their performance compared with existing commercial technology. Preliminary results indicate that substantial increases in power and energy density are possible. The effects of nanotube growth and processing methods on electrochemical capacitor performance is also presented. The compatibility of different SWCNTs and electrolytes was studied by varying the type of electrolyte ions that accumulate on the high-surface-area electrodes.

  4. A molecular theory for optimal blue energy extraction by electrical double layer expansion

    SciTech Connect

    Kong, Xian; Gallegos, Alejandro; Lu, Diannan; Liu, Zheng; Wu, Jianzhong

    2015-08-19

    We proposed the electrical double layer expansion (CDLE) as a promising alternative to reverse electrodialysis (RED) and pressure retarded osmosis (PRO) processes for extracting osmotic power generated by the salinity difference between freshwater and seawater. The performance of the CDLE process is sensitive to the configuration of porous electrodes and operation parameters for ion extraction and release cycles. In our work, we use a classical density functional theory (CDFT) to examine how the electrode pore size and charging/discharging potentials influence the thermodynamic efficiency of the CDLE cycle. The existence of an optimal charging potential that maximizes the energy output for a given pore configuration is predicted, which varies substantially with the pore size, especially when it is smaller than 2 nm. Finally, the thermodynamic efficiency is maximized when the electrode has a pore size about twice the ion diameter.

  5. A molecular theory for optimal blue energy extraction by electrical double layer expansion

    DOE PAGES

    Kong, Xian; Gallegos, Alejandro; Lu, Diannan; ...

    2015-08-19

    We proposed the electrical double layer expansion (CDLE) as a promising alternative to reverse electrodialysis (RED) and pressure retarded osmosis (PRO) processes for extracting osmotic power generated by the salinity difference between freshwater and seawater. The performance of the CDLE process is sensitive to the configuration of porous electrodes and operation parameters for ion extraction and release cycles. In our work, we use a classical density functional theory (CDFT) to examine how the electrode pore size and charging/discharging potentials influence the thermodynamic efficiency of the CDLE cycle. The existence of an optimal charging potential that maximizes the energy output formore » a given pore configuration is predicted, which varies substantially with the pore size, especially when it is smaller than 2 nm. Finally, the thermodynamic efficiency is maximized when the electrode has a pore size about twice the ion diameter.« less

  6. AA stacking, tribological and electronic properties of double-layer graphene with krypton spacer.

    PubMed

    Popov, Andrey M; Lebedeva, Irina V; Knizhnik, Andrey A; Lozovik, Yurii E; Potapkin, Boris V; Poklonski, Nikolai A; Siahlo, Andrei I; Vyrko, Sergey A

    2013-10-21

    Structural, energetic, and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translational and rotational motion and the shear mode frequency of the graphene layers are calculated. For the incommensurate phase, both of the barriers are found to be negligibly small. A considerable change of tunneling conductance between the graphene layers separated by the commensurate krypton spacer at their relative subangstrom displacement is revealed by the use of the Bardeen method. The possibility of nanoelectromechanical systems based on the studied tribological and electronic properties of the considered heterostructures is discussed.

  7. Electrical double layers and differential capacitance in molten salts from density functional theory

    DOE PAGES

    Frischknecht, Amalie L.; Halligan, Deaglan O.; Parks, Michael L.

    2014-08-05

    Classical density functional theory (DFT) is used to calculate the structure of the electrical double layer and the differential capacitance of model molten salts. The DFT is shown to give good qualitative agreement with Monte Carlo simulations in the molten salt regime. The DFT is then applied to three common molten salts, KCl, LiCl, and LiKCl, modeled as charged hard spheres near a planar charged surface. The DFT predicts strong layering of the ions near the surface, with the oscillatory density profiles extending to larger distances for larger electrostatic interactions resulting from either lower temperature or lower dielectric constant. Inmore » conclusion, overall the differential capacitance is found to be bell-shaped, in agreement with recent theories and simulations for ionic liquids and molten salts, but contrary to the results of the classical Gouy-Chapman theory.« less

  8. Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation

    PubMed Central

    Kang, Homan; Cho, Hong-Jun; Park, Sung-Jun; Yang, Jin-Kyoung; Kim, Sehoon; Kim, Hyung-Mo; Jun, Bong-Hyun; Lee, Yoon-Sik

    2015-01-01

    Superparamagnetic Fe3O4 nanoparticles (NPs) based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe3O4 NPs by magnets may limit broad applications of Fe3O4 NP-based nanomaterials. In this study, we report fabrication of Fe3O4 NPs double-layered silica nanoparticles (DL MNPs) with a silica core and highly packed Fe3O4 NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe3O4 NPs single-layered silica nanoparticles (SL MNPs) and silica-coated Fe3O4 NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules. PMID:26599084

  9. Limitations and strengths of uniformly charged double-layer theory: physical significance of capacitance anomalies.

    PubMed

    Partenskii, Michael B; Jordan, Peter C

    2008-06-01

    Theoretical studies of electrical double layers typically consider the response of ionic conductors to the field of uniform charge-density distributions sigma ("sigma -control"). Many such analyses predict apparent anomalies of differential capacitance, C , including divergences and negative values. To clarify misconceptions regarding these predictions, we critically reexamine some theoretical approaches dealing with the admissible sign of C . We examine the anomalies' origin and stress its relation to the artificiality of sigma-control. We show that calculations based on sigma-control can illuminate the nature of instabilities and phase transitions under the physically attainable conditions of potential control, where applied voltage phi rather than sigma is fixed. For illustration, we discuss the physical nature of the "ultimate anomaly," negative integral capacitance predicted by some recent analyses. We also show that sigma-control anomalies can explain some experimentally observed features of C(phi) .

  10. Molecular Simulations of Graphene-Based Electric Double-Layer Capacitors

    NASA Astrophysics Data System (ADS)

    Kalluri, Raja K.; Konatham, Deepthi; Striolo, Alberto

    2011-03-01

    Towards deploying renewable energy sources it is crucial to develop efficient and cost-effective technologies to store electricity. Traditional batteries are plagued by a number of practical problems that at present limit their widespread applicability. One possible solution is represented by electric double-layer capacitors (EDLCs). To deploy EDLCs at the large scale it is necessary to better understand how electrolytes pack and diffuse within narrow charged pores. We present here simulation results for the concentrated aqueous solutions of NaCl, CsCl, and NaI confined within charged graphene-based porous materials. We discuss how the structure of confined water, the salt concentration, the ions size, and the surface charge density determine the accumulation of electrolytes within the porous network. Our results, compared to data available for bulk systems, are critical for relating macroscopic observations to molecular-level properties of the confined working fluids. Research supported by the Department of Energy.

  11. Electrical double layers and differential capacitance in molten salts from density functional theory

    SciTech Connect

    Frischknecht, Amalie L.; Halligan, Deaglan O.; Parks, Michael L.

    2014-08-05

    Classical density functional theory (DFT) is used to calculate the structure of the electrical double layer and the differential capacitance of model molten salts. The DFT is shown to give good qualitative agreement with Monte Carlo simulations in the molten salt regime. The DFT is then applied to three common molten salts, KCl, LiCl, and LiKCl, modeled as charged hard spheres near a planar charged surface. The DFT predicts strong layering of the ions near the surface, with the oscillatory density profiles extending to larger distances for larger electrostatic interactions resulting from either lower temperature or lower dielectric constant. In conclusion, overall the differential capacitance is found to be bell-shaped, in agreement with recent theories and simulations for ionic liquids and molten salts, but contrary to the results of the classical Gouy-Chapman theory.

  12. Rational design of new electrolyte materials for electrochemical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Schütter, Christoph; Husch, Tamara; Viswanathan, Venkatasubramanian; Passerini, Stefano; Balducci, Andrea; Korth, Martin

    2016-09-01

    The development of new electrolytes is a centerpiece of many strategies to improve electrochemical double layer capacitor (EDLC) devices. We present here a computational screening-based rational design approach to find new electrolyte materials. As an example application, the known chemical space of almost 70 million compounds is investigated in search of electrochemically more stable solvents. Cyano esters are identified as especially promising new compound class. Theoretical predictions are validated with subsequent experimental studies on a selected case. These studies show that based on theoretical predictions only, a previously untested, but very well performing compound class was identified. We thus find that our rational design strategy is indeed able to successfully identify completely new materials with substantially improved properties.

  13. Sub-millimeter arbitrary arrangements of monolithically micro-scale electrical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Laszczyk, Karolina U.; Kazufumi, Kobashi; Sakurai, Shunsuke; Sekiguchi, Atsuko; Futaba, Don N.; Yamada, Takeo; Hata, Kenji

    2015-12-01

    We report the investigation on the reproducibility of micro-scale electric double layer capacitors (micro-EDLCs). The micro-EDLC components were fabricated parallel using photolithography, wet and dry processing. Electrodes of the micro-EDLCs are highly dense packed Single Wall Carbon Nanotubes (SWCNTs) that form a mesh structure. The micro- EDLCs are connected 1-10 in series and in parallel being unified electrical circuits to tune the capacitance and the operational voltage. To confirm the reproducibility of the cells as well as the yield we performed electrochemical measurements in order to define the performance uniformity between cells strings and individual cells connected in a string. For 1-10 cells in series and in parallel the trends for the capacitance and operational voltage satisfied electrophysics rules governing cells addition. However, the measurements of the individual cells in a string revealed the significant performance discrepancy that might result in a shorten life cycling of a circuit.

  14. Tunable surface electron spin splitting with electric double-layer transistors based on InN.

    PubMed

    Yin, Chunming; Yuan, Hongtao; Wang, Xinqiang; Liu, Shitao; Zhang, Shan; Tang, Ning; Xu, Fujun; Chen, Zhuoyu; Shimotani, Hidekazu; Iwasa, Yoshihiro; Chen, Yonghai; Ge, Weikun; Shen, Bo

    2013-05-08

    Electrically manipulating electron spins based on Rashba spin-orbit coupling (SOC) is a key pathway for applications of spintronics and spin-based quantum computation. Two-dimensional electron systems (2DESs) offer a particularly important SOC platform, where spin polarization can be tuned with an electric field perpendicular to the 2DES. Here, by measuring the tunable circular photogalvanic effect (CPGE), we present a room-temperature electric-field-modulated spin splitting of surface electrons on InN epitaxial thin films that is a good candidate to realize spin injection. The surface band bending and resulting CPGE current are successfully modulated by ionic liquid gating within an electric double-layer transistor configuration. The clear gate voltage dependence of CPGE current indicates that the spin splitting of the surface electron accumulation layer is effectively tuned, providing a way to modulate the injected spin polarization in potential spintronic devices.

  15. Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation.

    PubMed

    Kyeong, San; Jeong, Cheolhwan; Kang, Homan; Cho, Hong-Jun; Park, Sung-Jun; Yang, Jin-Kyoung; Kim, Sehoon; Kim, Hyung-Mo; Jun, Bong-Hyun; Lee, Yoon-Sik

    2015-01-01

    Superparamagnetic Fe3O4 nanoparticles (NPs) based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe3O4 NPs by magnets may limit broad applications of Fe3O4 NP-based nanomaterials. In this study, we report fabrication of Fe3O4 NPs double-layered silica nanoparticles (DL MNPs) with a silica core and highly packed Fe3O4 NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe3O4 NPs single-layered silica nanoparticles (SL MNPs) and silica-coated Fe3O4 NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules.

  16. Electrical Double Layer Capacitance in a Graphene-embedded Al2O3 Gate Dielectric.

    PubMed

    Ki Min, Bok; Kim, Seong K; Jun Kim, Seong; Ho Kim, Sung; Kang, Min-A; Park, Chong-Yun; Song, Wooseok; Myung, Sung; Lim, Jongsun; An, Ki-Seok

    2015-11-04

    Graphene heterostructures are of considerable interest as a new class of electronic devices with exceptional performance in a broad range of applications has been realized. Here, we propose a graphene-embedded Al2O3 gate dielectric with a relatively high dielectric constant of 15.5, which is about 2 times that of Al2O3, having a low leakage current with insertion of tri-layer graphene. In this system, the enhanced capacitance of the hybrid structure can be understood by the formation of a space charge layer at the graphene/Al2O3 interface. The electrical properties of the interface can be further explained by the electrical double layer (EDL) model dominated by the diffuse layer.

  17. Large Magnetoresistance at High Bias Voltage in Double-layer Organic Spin Valves

    NASA Astrophysics Data System (ADS)

    Subedi, R. C.; Liang, S. H.; Geng, R.; Zhang, Q. T.; Lou, L.; Wang, J.; Han, X. F.; Nguyen, T. D.

    We report studies of magnetoresistance (MR) in double-layer organic spin valves (DOSV) using tris (8-hydroxyquinolinato) aluminum (Alq3) spacers. The device exhibits three distinct resistance levels depending on the relative magnetizations of the ferromagnetic electrodes. We observed a much weaker bias voltage dependence of MR in the device compared to that in the conventional organic spin valve (OSV). The MR magnitude reduces by the factor of two at 0.7 V bias voltage in the DOSV compared to 0.02 V in the conventional OSV. Remarkably, the MR magnitude reaches 0.3% at 6 V bias in the DOSVs, the largest MR response ever reported in OSVs at this bias. Our finding may have a significant impact on achieving high efficient bipolar OSVs strictly performed at high voltages. University of Georgia start-up fund, Ministry of Education, Singapore, National Natural Science Foundation of China.

  18. Investigation of Interface between Ge Electrodes and Ionic Liquid Electrolytes for Electric Double Layer Capacitors

    NASA Astrophysics Data System (ADS)

    Abeysinghe, R. M.; Oguchi, H.; Kuwano, H.

    2016-11-01

    This study discusses novel way of use of ionic liquids to develop Ge-based electrodes for electric double layer capacitors (EDLC). We found that ionic liquids change their electrochemical properties depending on the amount of the absorbed water. Wet ionic liquids work as solvents to dissolve Ge and make porous structures, whereas dry ones work as electrolytes of the EDLCs. The former property was used to increase surface area of the electrodes which is desired to increase the capacity of EDLCs. This method showed another advantage in contrast to the dry ionic liquids; wet ones could fill the complex Ge pores in parallel to porous structure formation. Finally, after porous formation, we dried the ionic liquid at 100 °C and prepared the EDLCs composed of Ge porous electrodes. Cyclic voltammetry and impedance measurements indicated that the obtained devices can work as EDLCs.

  19. Electric double-layer capacitors based on highly graphitized nanoporous carbons derived from ZIF-67.

    PubMed

    Torad, Nagy L; Salunkhe, Rahul R; Li, Yunqi; Hamoudi, Hicham; Imura, Masataka; Sakka, Yoshio; Hu, Chi-Chang; Yamauchi, Yusuke

    2014-06-23

    Nanoporous carbons (NPCs) have large specific surface areas, good electrical and thermal conductivity, and both chemical and mechanical stability, which facilitate their use in energy storage device applications. In the present study, highly graphitized NPCs are synthesized by one-step direct carbonization of cobalt-containing zeolitic imidazolate framework-67 (ZIF-67). After chemical etching, the deposited Co content can be completely removed to prepare pure NPCs with high specific surface area, large pore volume, and intrinsic electrical conductivity (high content of sp(2) -bonded carbons). A detailed electrochemical study is performed using cyclic voltammetry and galvanostatic charge-discharge measurements. Our NPC is very promising for efficient electrodes for high-performance supercapacitor applications. A maximum specific capacitance of 238 F g(-1) is observed at a scan rate of 20 mV s(-1) . This value is very high compared to previous works on carbon-based electric double layer capacitors.

  20. Steric effects in the dynamics of electrolytes at large applied voltages. I. Double-layer charging

    NASA Astrophysics Data System (ADS)

    Kilic, Mustafa Sabri; Bazant, Martin Z.; Ajdari, Armand

    2007-02-01

    The classical Poisson-Boltzmann (PB) theory of electrolytes assumes a dilute solution of point charges with mean-field electrostatic forces. Even for very dilute solutions, however, it predicts absurdly large ion concentrations (exceeding close packing) for surface potentials of only a few tenths of a volt, which are often exceeded, e.g., in microfluidic pumps and electrochemical sensors. Since the 1950s, several modifications of the PB equation have been proposed to account for the finite size of ions in equilibrium, but in this two-part series, we consider steric effects on diffuse charge dynamics (in the absence of electro-osmotic flow). In this first part, we review the literature and analyze two simple models for the charging of a thin double layer, which must form a condensed layer of close-packed ions near the surface at high voltage. A surprising prediction is that the differential capacitance typically varies nonmonotonically with the applied voltage, and thus so does the response time of an electrolytic system. In PB theory, the differential capacitance blows up exponentially with voltage, but steric effects actually cause it to decrease while remaining positive above a threshold voltage where ions become crowded near the surface. Other nonlinear effects in PB theory are also strongly suppressed by steric effects: The net salt adsorption by the double layers in response to the applied voltage is greatly reduced, and so is the tangential “surface conduction” in the diffuse layer, to the point that it can often be neglected compared to bulk conduction (small Dukhin number).

  1. Double-Layer Graphene Outperforming Monolayer as Catalyst on Silicon Photocathode for Hydrogen Production.

    PubMed

    Sim, Uk; Moon, Joonhee; Lee, Joohee; An, Junghyun; Ahn, Hyo-Yong; Kim, Dong Jin; Jo, Insu; Jeon, Cheolho; Han, Seungwu; Hong, Byung Hee; Nam, Ki Tae

    2017-02-01

    Photoelectrochemical cells are used to split hydrogen and oxygen from water molecules to generate chemical fuels to satisfy our ever-increasing energy demands. However, it is a major challenge to design efficient catalysts to use in the photoelectochemical process. Recently, research has focused on carbon-based catalysts, as they are nonprecious and environmentally benign. Interesting advances have also been made in controlling nanostructure interfaces and in introducing new materials as catalysts in the photoelectrochemical cell. However, these catalysts have as yet unresolved issues involving kinetics and light-transmittance. In this work, we introduce high-transmittance graphene onto a planar p-Si photocathode to produce a hydrogen evolution reaction to dramatically enhance photon-to-current efficiency. Interestingly, double-layer graphene/Si exhibits noticeably improved photon-to-current efficiency and modifies the band structure of the graphene/Si photocathode. On the basis of in-depth electrochemical and electrical analyses, the band structure of graphene/Si was shown to result in a much lower work function than Si, accelerating the electron-to-hydrogen production potential. Specifically, plasma-treated double-layer graphene exhibited the best performance and the lowest work function. We electrochemically analyzed the mechanism at work in the graphene-assisted photoelectrode. Atomistic calculations based on the density functional theory were also carried out to more fully understand our experimental observations. We believe that investigation of the underlying mechanism in this high-performance electrode is an important contribution to efforts to develop high-efficiency metal-free carbon-based catalysts for photoelectrochemical cell hydrogen production.

  2. Electric double layer at the interface of ionic liquid-dielectric liquid under electric field.

    PubMed

    Lee, D W; Im, D J; Kang, I S

    2013-02-12

    The structure of the electric double layer (EDL) is analyzed in order to understand the electromechanical behavior of the interface of ionic liquid-dielectric liquid. The modified Poisson-Boltzmann equation proposed by Bazant et al. is solved to see the crowding and the overscreening effects that are the characteristics of an ionic liquid (Bazant, M. Z.; Storey, B. D.; Kornyshev, A. A. Double layer in ionic liquids: Overscreening versus crowding. Phys. Rev. Lett. 2011, 106, 046102.). From the simple one-dimensional (1-D) analysis, it is found that the changes of the composition and the material properties in the EDL are negligible except under some extreme conditions such as strong electric field over O(10(8)) V/m. From the electromechanical view points, an ionic liquid behaves like a pure conductor at the interface with a dielectric liquid. Based on these findings, three specific application problems are considered. In the first, a new method is suggested for measuring the interfacial tension of an ionic liquid-dielectric liquid system. The deformation of a charged ionic liquid droplet translating between two electrodes is used for this measurement. The second is for the Taylor cone problem, which includes an extreme electric field condition near the tip. The size of the critical region, where the EDL effect should be considered, is estimated by using the 1-D analysis result. Numerical computation is also performed to see the profiles of electric potential and the electric stress along the interface of the Taylor cone. Lastly, the electrowetting problem of the ionic liquid is considered. The discrepancies in the results of previous workers are interpreted by using the results of the present work. It is shown that all the results might be consistent if the leaking of the dielectric layer and/or the adsorption of ions is considered.

  3. Ion Acceleration by Ultra-intense Laser Pulse Interacting with Double-layer Near-critical Density Plasma

    NASA Astrophysics Data System (ADS)

    Gu, Y. J.; Kong, Q.; Kawata, S.; Izumiyama, T.; Nagashima, T.; Takano, M.; Li, X. F.; Yu, Q.; Barada, D.; Ma, Y. Y.; Wang, P. X.

    2016-03-01

    A collimated ion beam is generated through the interaction between ultra-intense laser pulse and a double layer plasma. The maximum energy is above 1GeV and the total charge of high energy protons is about several tens of nC/μm. The double layer plasma is combined with an underdense plasma and a thin overdense one. The wakefield traps and accelerates a bunch of electrons to high energy in the first underdense slab. When the well collimated electron beam accelerated by the wakefield penetrates through the second overdense slab, it enhances target normal sheath acceleration (TNSA) and breakout after-burner (BOA) regimes. The mechanism is simulated and analyzed by 2.5 dimensional Particle-in-cell code. Compared with single target TNSA or BOA, both the acceleration gradient and energy transfer efficiency are higher in the double layer regime.

  4. Ion acoustic solitary waves and double layers in a plasma with two temperature electrons featuring Tsallis distribution

    SciTech Connect

    Shalini, Saini, N. S.

    2014-10-15

    The propagation properties of large amplitude ion acoustic solitary waves (IASWs) are studied in a plasma containing cold fluid ions and multi-temperature electrons (cool and hot electrons) with nonextensive distribution. Employing Sagdeev pseudopotential method, an energy balance equation has been derived and from the expression for Sagdeev potential function, ion acoustic solitary waves and double layers are investigated numerically. The Mach number (lower and upper limits) for the existence of solitary structures is determined. Positive as well as negative polarity solitary structures are observed. Further, conditions for the existence of ion acoustic double layers (IADLs) are also determined numerically in the form of the critical values of q{sub c}, f and the Mach number (M). It is observed that the nonextensivity of electrons (via q{sub c,h}), concentration of electrons (via f) and temperature ratio of cold to hot electrons (via β) significantly influence the characteristics of ion acoustic solitary waves as well as double layers.

  5. Terahertz polarization converter and one-way transmission based on double-layer magneto-plasmonics of magnetized InSb.

    PubMed

    Fan, Fei; Xu, Shi-Tong; Wang, Xiang-Hui; Chang, Sheng-Jiang

    2016-11-14

    In this work, we investigate the nonreciprocal circular dichroism for terahertz (THz) waves in magnetized InSb by the theoretical calculation and numerical simulation, which indicates that longitudinally magnetized InSb can be applied to the circular polarizer and nonreciprocal one-way transmission for the circular polarization THz waves. Furthermore, we propose a double-layer magnetoplasmonics based on the longitudinally magnetized InSb, and find two MO enhancement mechanisms in this device: the magneto surface plasmon resonance on the InSb-metal surface and Fabry-Pérot resonances between two orthogonal metallic gratings. These two resonance mechanisms enlarge the MO polarization rotation and greatly reduce the external magnetic field below 0.1T. The one-way transmission and perfect linear polarization conversion can be realized over 70dB, of which the transmittance can be modulated from 0 to 80% when the weak magnetic field changes from 0 to 0.1T under the low temperature around 200K. This magnetoplasmonic device has broad potential as a THz isolator, modulator, polarization convertor, and filter in the THz application systems.

  6. Determination of effective mechanical properties of a double-layer beam by means of a nano-electromechanical transducer

    SciTech Connect

    Hocke, Fredrik; Pernpeintner, Matthias; Gross, Rudolf; Zhou, Xiaoqing; Kippenberg, Tobias J.; Schliesser, Albert; Huebl, Hans

    2014-09-29

    We investigate the mechanical properties of a doubly clamped, double-layer nanobeam embedded into an electromechanical system. The nanobeam consists of a highly pre-stressed silicon nitride and a superconducting niobium layer. By measuring the mechanical displacement spectral density both in the linear and the nonlinear Duffing regime, we determine the pre-stress and the effective Young's modulus of the nanobeam. An analytical double-layer model quantitatively corroborates the measured values. This suggests that this model can be used to design mechanical multilayer systems for electro- and optomechanical devices, including materials controllable by external parameters such as piezoelectric, magnetostrictive, or in more general multiferroic materials.

  7. Modeling Low-temperature Geochemical Processes

    NASA Astrophysics Data System (ADS)

    Nordstrom, D. K.

    2003-12-01

    Geochemical modeling has become a popular and useful tool for a wide number of applications from research on the fundamental processes of water-rock interactions to regulatory requirements and decisions regarding permits for industrial and hazardous wastes. In low-temperature environments, generally thought of as those in the temperature range of 0-100 °C and close to atmospheric pressure (1 atm=1.01325 bar=101,325 Pa), complex hydrobiogeochemical reactions participate in an array of interconnected processes that affect us, and that, in turn, we affect. Understanding these complex processes often requires tools that are sufficiently sophisticated to portray multicomponent, multiphase chemical reactions yet transparent enough to reveal the main driving forces. Geochemical models are such tools. The major processes that they are required to model include mineral dissolution and precipitation; aqueous inorganic speciation and complexation; solute adsorption and desorption; ion exchange; oxidation-reduction; or redox; transformations; gas uptake or production; organic matter speciation and complexation; evaporation; dilution; water mixing; reaction during fluid flow; reaction involving biotic interactions; and photoreaction. These processes occur in rain, snow, fog, dry atmosphere, soils, bedrock weathering, streams, rivers, lakes, groundwaters, estuaries, brines, and diagenetic environments. Geochemical modeling attempts to understand the redistribution of elements and compounds, through anthropogenic and natural means, for a large range of scale from nanometer to global. "Aqueous geochemistry" and "environmental geochemistry" are often used interchangeably with "low-temperature geochemistry" to emphasize hydrologic or environmental objectives.Recognition of the strategy or philosophy behind the use of geochemical modeling is not often discussed or explicitly described. Plummer (1984, 1992) and Parkhurst and Plummer (1993) compare and contrast two approaches for

  8. The science capability of the Low Temperature Microgravity Physics Facility

    NASA Technical Reports Server (NTRS)

    Larson, M.; Croonquist, A.; Dick, G. J.; Liu, Y.

    2002-01-01

    The Low Temperature Microgravity Physics Facility (LTMPF) is a multiple user and multiple-flight NASA facility that will provide a low temperature environment for about 4. 5 months on board the International Space Station (ISS).

  9. Low Temperature Aluminum Dissolution Of Sludge Waste

    SciTech Connect

    Keefer, M.T.; Hamm, B.A.; Pike, J.A.

    2008-07-01

    primarily of radioactive wastes containing a very high aluminum concentration. Based on initial laboratory testing and previous sludge characterization, aluminum in this sludge could be dissolved at low temperature (no more than 65 deg. C) in a concentrated caustic solution. The amount of aluminum predicted to dissolve under these conditions ranged from 25% to 80%. An opportunity existed to remove a significant amount of aluminum prior to vitrification in DWPF and increase the level of understanding of the effects of caustic dissolution of aluminum at lower temperatures. This paper presents the results of a real waste laboratory demonstration and full-scale implementation of a low temperature aluminum dissolution process which should be considered as a viable means to reduce radioactive sludge mass and reduce the amount of waste to be vitrified. (authors)

  10. 46 CFR 57.05-5 - Low temperature application.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Low temperature application. 57.05-5 Section 57.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-5 Low temperature application. For low temperature application, each...

  11. 46 CFR 57.05-5 - Low temperature application.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Low temperature application. 57.05-5 Section 57.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-5 Low temperature application. For low temperature application, each...

  12. 46 CFR 57.05-5 - Low temperature application.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Low temperature application. 57.05-5 Section 57.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-5 Low temperature application. For low temperature application, each...

  13. 46 CFR 57.05-5 - Low temperature application.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Low temperature application. 57.05-5 Section 57.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-5 Low temperature application. For low temperature application, each...

  14. Low temperature catalysts for methanol production

    DOEpatents

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1985-03-12

    A catalyst and process useful at low temperatures (below about 160/sup 0/C) and preferably in the range 80 to 120/sup 0/C used in the production of methanol from carbon monoxide and hydrogen is disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH-RONa-M(OAc)/sub 2/ where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1 to 6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M = Ni and R = tertiary amyl). Mo(CO)/sub 6/ is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  15. Order in dense hydrogen at low temperatures

    PubMed Central

    Edwards, B.; Ashcroft, N. W.

    2004-01-01

    By increase in density, impelled by pressure, the electronic energy bands in dense hydrogen attain significant widths. Nevertheless, arguments can be advanced suggesting that a physically consistent description of the general consequences of this electronic structure can still be constructed from interacting but state-dependent multipoles. These reflect, in fact self-consistently, a disorder-induced localization of electron states partially manifesting the effects of proton dynamics; they retain very considerable spatial inhomogeneity (as they certainly do in the molecular limit). This description, which is valid provided that an overall energy gap has not closed, leads at a mean-field level to the expected quadrupolar coupling, but also for certain structures to the eventual emergence of dipolar terms and their coupling when a state of broken charge symmetry is developed. A simple Hamiltonian incorporating these basic features then leads to a high-density, low-temperature phase diagram that appears to be in substantial agreement with experiment. In particular, it accounts for the fact that whereas the phase I–II phase boundary has a significant isotope dependence, the phase II–III boundary has very little. PMID:15028839

  16. Properties of ferrites at low temperatures (invited)

    SciTech Connect

    Dionne, G.F.

    1997-04-01

    At cryogenic temperatures magnetic properties of ferrites change significantly from their values at room temperature, which has been the main regime for most device applications. Recently, microwave ferrite devices with superconducting microstrip circuits have been demonstrated at a temperature of 77 K with virtually no electrical conduction losses. Conventional ferrimagnetic garnet and spinel compositions, however, are not generally optimized for low temperatures and may require chemical redesign if the full potential of these devices is to be realized. Saturation magnetizations increase according to the Brillouin{endash}Weiss function dependence that is characteristic of all ferromagnetic materials. Increased magnetocrystalline anisotropy and magnetostriction can have large effects on hysteresis loop squareness and coercive fields that are essential for stable phase shift and efficient switching. Rare-earth impurities and other ions with short spin-lattice relaxation times can cause increased microwave losses. In this article, the basic magnetochemistry pertaining to ferrites will be examined for adaptation of ferrite technology to cryogenic environments. {copyright} {ital 1997 American Institute of Physics.}

  17. a Low Temperature Regenerator Test Facility

    NASA Astrophysics Data System (ADS)

    Kashani, A.; Helvensteijn, B. P. M.; Feller, J. R.; Salerno, L. J.; Kittel, P.

    2008-03-01

    Testing regenerators presents an interesting challenge. When incorporated into a cryocooler, a regenerator is intimately coupled to the other components: expander, heat exchangers, and compressor. It is difficult to isolate the performance of any single component. We have developed a low temperature test facility that will allow us to separate the performance of the regenerator from the rest of the cryocooler. The purpose of the facility is the characterization of test regenerators using novel materials and/or geometries in temperature ranges down to 15 K. It consists of the following elements: The test column has two regenerators stacked in series. The coldest stage regenerator is the device under test. The warmer stage regenerator contains a stack of stainless steel screen, a well-characterized material. A commercial cryocooler is used to fix the temperatures at both ends of the test regenerator, cooling both heat exchangers flanging the regenerator stack. Heaters allow varying the temperatures and allow measurement of the remaining cooling power, and thus, regenerator effectiveness. A linear compressor delivers an oscillating pressure to the regenerator assembly. An inertance tube and reservoir provide the proper phase difference between mass flow and pressure. This phase shift, along with the imposed temperature differential, simulates the conditions of the test regenerator when used in an actual pulse tube cryocooler. This paper presents development details of the regenerator test facility, and test results on a second stage, stainless steel screen test regenerator.

  18. Extreme low temperature tolerance in woody plants

    PubMed Central

    Strimbeck, G. Richard; Schaberg, Paul G.; Fossdal, Carl G.; Schröder, Wolfgang P.; Kjellsen, Trygve D.

    2015-01-01

    Woody plants in boreal to arctic environments and high mountains survive prolonged exposure to temperatures below -40°C and minimum temperatures below -60°C, and laboratory tests show that many of these species can also survive immersion in liquid nitrogen at -196°C. Studies of biochemical changes that occur during acclimation, including recent proteomic and metabolomic studies, have identified changes in carbohydrate and compatible solute concentrations, membrane lipid composition, and proteins, notably dehydrins, that may have important roles in survival at extreme low temperature (ELT). Consideration of the biophysical mechanisms of membrane stress and strain lead to the following hypotheses for cellular and molecular mechanisms of survival at ELT: (1) Changes in lipid composition stabilize membranes at temperatures above the lipid phase transition temperature (-20 to -30°C), preventing phase changes that result in irreversible injury. (2) High concentrations of oligosaccharides promote vitrification or high viscosity in the cytoplasm in freeze-dehydrated cells, which would prevent deleterious interactions between membranes. (3) Dehydrins bind membranes and further promote vitrification or act stearically to prevent membrane–membrane interactions. PMID:26539202

  19. Low Temperature Catalyst for NH3 Removal

    NASA Technical Reports Server (NTRS)

    Monje, Oscar; Melendez, Orlando

    2013-01-01

    Air revitalization technologies maintain a safe atmosphere inside spacecraft by the removal of C02, ammonia (NH3), and trace contaminants. NH3 onboard the International Space Station (ISS) is produced by crew metabolism, payloads, or during an accidental release of thermal control refrigerant. Currently, the ISS relies on removing NH3 via humidity condensate and the crew wears hooded respirators during emergencies. A different approach to cabin NH3 removal is to use selective catalytic oxidation (SCO), which builds on thermal catalytic oxidation concepts that could be incorporated into the existing TCCS process equipment architecture on ISS. A low temperature platinum-based catalyst (LTP-Catalyst) developed at KSC was used for converting NH3 to H20 and N2 gas by SCO. The challenge of implementing SCO is to reduce formation of undesirable byproducts like NOx (N20 and NO). Gas mixture analysis was conducted using FTIR spectrometry in the Regenerable VOC Control System (RVCS) Testbed. The RVCS was modified by adding a 66 L semi-sealed chamber, and a custom NH3 generator. The effect of temperature on NH3 removal using the LTP-Catalyst was examined. A suitable temperature was found where NH3 removal did not produce toxic NO, (NO, N02) and N20 formation was reduced.

  20. Low temperature catalysts for methanol production

    DOEpatents

    Sapienza, Richard S.; Slegeir, William A.; O'Hare, Thomas E.; Mahajan, Devinder

    1986-01-01

    A catalyst and process useful at low temperatures (below about 160.degree. C.) and preferably in the range 80.degree.-120.degree. C. used in the production of methanol from carbon monoxide and hydrogen is disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa--M(OAc).sub.2 where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1-6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M=Ni and R=tertiary amyl). Mo(CO).sub.6 is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  1. Low temperature catalysts for methanol production

    DOEpatents

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1986-10-28

    A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1-6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is NiC (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  2. Prototype low temperature low power cryocooler

    SciTech Connect

    Pierce, W.G.

    1982-02-01

    Over the past several years considerable interest has developed for low power, low cost mechanical cryocoolers for use in cooling SQUIDS and other superconducting devices. In 1977 Dr. Jim Zimmerman of National Bureau of Standards, Boulder, CO described a stirling cycle cryocooler that exhibited the following desirable characteristics: (1) Low input power (approximately 50 watts connected load); (2) Modest cooling capacity at very low temperature; (3) Constructed of non-ferromagnetic materials; and (4) Simple design. Dr. Zimmerman's intent was to demonstrate the feasibility of constructing a simple low power cryocooler capable of cooling an operational SQUID. After several modifications of the original cryocooler, Dr. Zimmerman successfully operated a point-Contact Nb SQUID on a four-stage stirling cycle cryocooler with a mechanical drive power of approximately 15 watts, and a capacity of few milliwatts at less than 9 Kelvin. During this period Lake Shore Cryotronics, Inc. successfully negotiated an exclusive licensing (for the U.S.) agreement with Oxford Instruments Ltd. concerning a simple patented single stage cryocooler utilizing a slide-valve-controlled gas driven displacer drive head, powered by a remote conventional high speed compressor. The lowest temperature achieved was less than 20 Kelvin with the two stage cylinder/displacer operating at a cycle rate of 2Hz, 100 psi inlet (pressure), and 20 psi outlet pressure.

  3. Low temperature growth of boron nitride nanotubes

    NASA Astrophysics Data System (ADS)

    Lee, Chee Huei; Xie, Ming; Wang, Jiesheng; Khin Yap, Yoke

    2008-03-01

    Boron nitride nanotubes (BNNTs) are promising nanostuctures that will complement the applications of carbon nanotubes in various emerging areas. However, the synthesis of BNNTs is still challenging and required high growth temperatures (1500 C to 3000 C). Here we will discuss about two approaches for low temperature growth of BNNTs. First, we have reported on the growth of pure BNNTs at 600 C by a plasma-enhanced pulsed-laser deposition (PE-PLD) technique [1]. These BNNTs were grown vertically-aligned on substrates. Latest result on the effect of catalyst, growth temperatures, ambient gas pressures, substrate bias voltages and the growth mechanism will be discussed in the meeting. Secondly, effective growth of BNNTs is recently achieved by conventional thermal chemical vapor deposition (CVD). Our new CVD approach leads to effective growth of long and clean BNNTs at 1200 C. SEM, TEM, EELS, Raman, FTIR, and UV absorption data indicate that these BNNTs are having high structural ordered and a energy band gap > 5.6 eV. [1]. J. Wang et. al, Nano Lett. 5, 2528 (2005).

  4. Low Temperature Detectors for Neutrino Physics

    NASA Astrophysics Data System (ADS)

    Nucciotti, A.

    2014-09-01

    Recent years have witnessed many exciting breakthroughs in neutrino physics. The detection of neutrino oscillations has proved that neutrinos are massive particles but the assessment of their absolute mass scale is still an outstanding challenge in today particle physics and cosmology. Due to their abundance as big-bang relics, massive neutrinos strongly affect the large-scale structure and dynamics of the universe. In addition, the knowledge of the scale of neutrino masses, together with their hierarchy pattern, is invaluable to clarify the origin of fermion masses beyond the Higgs mechanism. The mass hierarchy is not the only missing piece in the puzzle. Theories of neutrino mass generation call into play Majorana neutrinos and there are experimental observations pointing to the existence of sterile neutrinos in addition to the three ones weakly interacting. Since low temperature detectors were first proposed for neutrino physics experiments in 1984, there have been impressive technical progresses: today this technique offers the high energy resolution and scalability required for leading edges and competitive experiments addressing the still open questions.

  5. Moessbauer Analysis of Low-Temperature Bainite

    SciTech Connect

    Bruna, P.; Crespo, D.; Garcia-Mateo, C.; Bhadeshia, H.K.D.H.

    2005-04-26

    Low-temperature bainite, obtained by the transformation of austenite at temperatures as low as 200 deg. C for times as large as several days, has been reported to have extraordinary mechanical properties including the highest reported hardness of any bainitic steel. The unusual properties are a consequence of the fine scale of the microstructure, which contains bainite plates with thickness in the range 20-40 nm. The microstructure also contains carbon-enriched retained austenite which contributes to the properties via a number of mechanisms. In this work, the microstructure of a high carbon bainitic steel with Si to avoid cementite precipitation and Co to accelerate the transformation has been studied using Moessbauer spectroscopy for a series of samples transformed isothermally at 200 deg. C for time periods of 26, 34 and 96 hours. The total austenite content is almost identical ({approx}13 wt%) for these samples although the carbon concentrations of the phases differ as a function of transformation time. The austenite increases its carbon content from 5.4 atomic % after 26 h transformation to 6.3 at.% after 96 h, while the final bainitic phase retains about 2.2 at.% of C. These results are consistent with data obtained using atom probe tomography for samples transformed isothermally for 12 days.

  6. Low temperature sintering of fluorapatite glass-ceramics.

    PubMed

    Denry, Isabelle; Holloway, Julie A

    2014-02-01

    Fluorapatite glass-ceramics have been shown to be excellent candidates as scaffold materials for bone grafts, however, scaffold production by sintering is hindered by concurrent crystallization of the glass. Objective, our goal was to investigate the effect of Ca/Al ratio on the sintering behavior of Nb-doped fluorapatite-based glasses in the SiO2-Al2O3-P2O5-MgO-Na2O-K2O-CaO-CaF2 system. Methods, glass compositions with Ca/Al ratio of 1 (A), 2 (B), 4 (C) and 19 (D) were prepared by twice melting at 1525°C for 3h. Glasses were either cast as cylindrical ingots or ground into powders. Disk-shaped specimens were prepared by either sectioning from the ingots or powder-compacting in a mold, followed by heat treatment at temperatures ranging between 700 and 1050°C for 1h. The density was measured on both sintered specimens and heat treated discs as controls. The degree of sintering was determined from these measurements. Results and Significance XRD showed that fluorapatite crystallized in all glass-ceramics. A high degree of sintering was achieved at 775°C for glass-ceramic D (98.99±0.04%), and 900°C for glass-ceramic C (91.31±0.10). Glass-ceramics A or B were only partially sintered at 1000°C (63.6±0.8% and 74.1±1.5%, respectively). SEM revealed a unique microstructure of micron-sized spherulitic fluorapatite crystals in glass-ceramics C and D. Increasing the Ca/Al ratio promoted low temperature sintering of fluorapatite glass-ceramics, which are traditionally difficult to sinter.

  7. Low temperature sintering of fluorapatite glass-ceramics

    PubMed Central

    Denry, Isabelle; Holloway, Julie A.

    2014-01-01

    Fluorapatite glass-ceramics have been shown to be excellent candidates as scaffold materials for bone grafts, however, scaffold production by sintering is hindered by concurrent crystallization of the glass. Our goal was to investigate the effect of Ca/Al ratio on the sintering behavior of Nb-doped fluorapatite-based glasses in the SiO2-Al2O3-P2O5-MgO-Na2O-K2O-CaO-CaF2 system. Glass compositions with Ca/Al ratio of 1 (A), 2 (B), 4 (C) and 19 (D) were prepared by twice melting at 1525°C for 3h. Glasses were either cast as cylindrical ingots or ground into powders. Disc-shaped specimens were prepared by either sectioning from the ingots or powder-compacting in a mold, followed by heat treatment at temperatures ranging between 700 and 1050°C for 1h. The density was measured on both sintered specimens and heat treated discs as controls. The degree of sintering was determined from these measurements. XRD showed that fluorapatite crystallized in all glass-ceramics. A high degree of sintering was achieved at 775°C for glass-ceramic D (98.99±0.04%), and 900°C for glass-ceramic C (91.31±0.10). Glass-ceramics A or B were only partially sintered at 1000°C (63.6±0.8% and 74.1±1.5%, respectively). SEM revealed a unique microstructure of micron-sized spherulitic fluorapatite crystals in glass-ceramics C and D. Increasing the Ca/Al ratio promoted low temperature sintering of fluorapatite glass-ceramics, which are traditionally difficult to sinter. PMID:24252652

  8. LigLAP: Encirclement and Ligation of Vessels in Laparoscopic Surgery: A Double-Layer Suture Sealing Approach.

    PubMed

    Yousefian, Reza; Jones, Paul; Kia, Michael A; Zadeh, Mehrdad Hosseini

    2015-12-01

    This article proposes a potential automatic ligation (LigLAP) method to occlude vessels and ducts in several laparoscopic surgical procedures. Currently, stapling devices are widely used for this purpose. However, there are some complications associated with stapling devices, including biliary leak and tissue damage. In this article, we examine the feasibility of an alternative method that uses a double-layer suture to encircle and occlude a vessel. A heating element melts the outer layer of the suture at the cross-point of the suture to create a seal. Several electromechanical mechanisms have been proposed to carry out this ligation process. In addition, some parts have been prototyped for experimental verification and visualization. Several double-layered sutures have been created, and their tensile strength and sealing capabilities have been measured. Moreover, a simple leakage experiment has been performed to verify experimentally the idea of using the double-layer suture. The results show that the new suture and the thermal sealing method provide the required strength to occlude balloons filled with water. Although the results suggest that the proposed method and the double-layer suture may be used in surgical ligation processes, much more rigorous testing of leakage is required.

  9. Building high-efficiency CdS/CdSe-sensitized solar cells with a hierarchically branched double-layer architecture.

    PubMed

    Zhu, Zonglong; Qiu, Jianhang; Yan, Keyou; Yang, Shihe

    2013-05-22

    We report a double-layer architecture for a photoanode of quantum-dot-sensitized solar cells (QDSSCs), which consists of a ZnO nanorod array (NR) underlayer and a ZnO nanotetrapod (TP) top layer. Such double-layer and branching strategies have significantly increased the power conversion efficiency (PCE) to as high as 5.24%, nearly reaching the record PCE of QDSSCs based on TiO2. Our systematic studies have shown that the double-layer strategy could significantly reduce charge recombination at the interface between the charge collection anode (FTO) and ZnO nanostructure because of the strong and compact adhesion of the NRs and enhance charge transport due to the partially interpenetrating contact between the NR and TP layers, leading to improved open-circuit voltage (Voc) and short-circuit current density (Jsc). Also, when the double layer was subjected to further branching, a large increase in Jsc and, to a lesser extent, the fill factor (FF) has resulted from increases in quantum-dot loading, enhanced light scattering, and reduced series resistance.

  10. THE n-DISTRIBUTION OF ELECTRONS AND DOUBLE LAYERS IN THE ELECTRON-BEAM-RETURN-CURRENT SYSTEM OF SOLAR FLARES

    SciTech Connect

    Karlicky, Marian

    2012-05-01

    We investigate processes in the electron-beam-return-current system in the impulsive phase of solar flares to answer a question about the formation of the n-electron distribution detected in this phase of solar flares. An evolution of the electron-beam-return-current system with an initial local density depression is studied using a three-dimensional electromagnetic particle-in-cell model. In the system the strong double layer is formed. Its electric field potential increases with the electron beam flux. In this electric field potential, the electrons of background plasma are strongly accelerated and propagate in the return-current direction. The high-energy part of their distribution at the high-potential side of the strong double layer resembles that of the n-distribution. Thus, the detection of the n-distributions, where a form of the high-energy part of the distribution is the most important, can indicate the presence of strong double layers in solar flares. The similarity between processes in solar flare loops and those in the downward current region of the terrestrial aurora, where the double layers were observed by FAST satellite, supports this idea.

  11. Bias-free, solar-charged electric double-layer capacitors

    NASA Astrophysics Data System (ADS)

    Wu, Hao; Geng, Jing; Wang, Yuhang; Wang, Yanli; Peng, Zheng; Zheng, Gengfeng

    2014-11-01

    The conversion of solar energy with simultaneous electric energy storage provides a promising means for optimizing energy utilization efficiency and reducing device volume. In this paper, a 3-dimensional mesoporous carbon coated branched TiO2 nanowire composite is rationally designed for direct conversion and storage of solar energy as electric double-layer capacitive energy. The 1-dimensional, crystalline TiO2 trunks serve as long light absorption and continuous charge transport pathways, and the high-density TiO2 branches can efficiently increase the contact area with the surface coated mesoporous carbon layers. In addition, the ordered and uniformed mesopores provide large pore sizes for electrolyte penetration, and a high surface area for charge absorption and storage. Under a 1-sun illumination and no external electric bias, this branched TiO2/mesoporous carbon composite exhibits specific capacitances of over 30 and 23.4 F g-1, at current densities of 0.1 and 0.5 A g-1, respectively. An excellent stability of >50 photocharging-electrical discharging cycles has also been demonstrated, suggesting the potential of further developing this hybrid material structure for simultaneous solar conversion and electric energy storage.The conversion of solar energy with simultaneous electric energy storage provides a promising means for optimizing energy utilization efficiency and reducing device volume. In this paper, a 3-dimensional mesoporous carbon coated branched TiO2 nanowire composite is rationally designed for direct conversion and storage of solar energy as electric double-layer capacitive energy. The 1-dimensional, crystalline TiO2 trunks serve as long light absorption and continuous charge transport pathways, and the high-density TiO2 branches can efficiently increase the contact area with the surface coated mesoporous carbon layers. In addition, the ordered and uniformed mesopores provide large pore sizes for electrolyte penetration, and a high surface area for

  12. Systemic low temperature signaling in Arabidopsis.

    PubMed

    Gorsuch, Peter A; Sargeant, Alexander W; Penfield, Steven D; Quick, W Paul; Atkin, Owen K

    2010-09-01

    When leaves are exposed to low temperature, sugars accumulate and transcription factors in the C-repeat binding factor (CBF) family are expressed, which, together with CBF-independent pathways, are known to contribute to the cold acclimation process and an increase in freezing tolerance. What is not known, however, is whether expression of these cold-regulated genes can be induced systemically in response to a localized cold treatment. To address this, pre-existing, mature leaves of warm-grown Arabidopsis thaliana were exposed to a localized cold treatment (near 10 °C) whilst conjoined newly developing leaves continued only to experience warmer temperatures. In initial experiments on wild-type A. thaliana (Col-0) using real-time reverse transcription--PCR (RT-PCR) we observed that some genes--including CBF genes, certain downstream cold-responsive (COR) targets and CBF-independent transcription factors--respond to a direct 9 °C treatment of whole plants. In subsequent experiments, we found that the treatment of expanded leaves with temperatures near 10 °C can induce cold-associated genes in conjoined warm-maintained tissues. CBF1 showed a particularly strong systemic response, although CBF-independent transcription factors also responded. Moreover, the localized cold treatment of A. thaliana (C24) plants with a luciferase reporter fused to the promoter region of KIN2 indicated that in warm-maintained leaves, KIN2 might respond to a systemic signal from remote, directly cold-treated leaves. Collectively, our study provides strong evidence that the processes involved in cold acclimation are partially mediated by a signal that acts systemically. This has the potential to act as an early-warning system to enable developing leaves to cope better with the cold environment in which they are growing.

  13. Single vs. double layer suturing method repair of the urethral plate in the rabbit model of hypospadias

    PubMed Central

    Shirazi, Mehdi; Rahimi, Mohammad

    2016-01-01

    Introduction There are different methods of urethroplasty in hypospadias. The present study aimed to compare the repair of the urethral plate by single vs. double layer suturing. Material and methods Fifteen male rabbits were assigned to the control, single layer, and double layer urethral plate suturing groups (n = 5). Experimental hypospadias was induced in the second and third groups and the urethral plates were sutured. After two weeks, the penis was dissected out and underwent histopathological processing. Stereological studies were applied to obtain quantitative histological data regarding the structure of the urethra and the related part of the corpus spongiosum. Results Volume density of the urethral epithelium (the fraction of unit volume of the urethra occupied by its epithelium) was higher in the single layer suturing group when compared to the double layer or control groups (p <0.01). Additionally, the volume density of the urethral lumen (the fraction of the corpus spongiosum that is occupied by the urethral lumen) in the single versus the double layer suturing groups was respectively 2.4 and 2 folds higher than that in the control group (p <0.01). Besides, the volume density of the lumen was significantly higher in the single layer suturing when compared to the double layer suturing group (p <0.01). However, no significant difference was observed among the study groups regarding the volume density of the collagen and vessels in the incised site of the penis which implied that the fraction of the urethra and surrounding corpus spongiosum was occupied by collagen and vessels. Conclusions Urethral plate repair by the single layer suturing method could be accompanied by higher epithelialization and wider lumen in the rabbit model of hypospadias. PMID:28127462

  14. Influence of attached bacteria and biofilm on double-layer capacitance during biofilm monitoring by electrochemical impedance spectroscopy.

    PubMed

    Kim, Taeyoung; Kang, Junil; Lee, Joon-Hee; Yoon, Jeyong

    2011-10-01

    Development of an effective strategy for biofilm control in water-related system has become a matter of significant concern nowadays. Electrochemical monitoring, especially electrochemical impedance spectroscopy (EIS), is one of the efficient approaches to dealing with biofilm-related issues. However, currently used EIS methods without a redox probe intend to detect all effects generated from media components, bacteria, and bacterial metabolites, which used to make the signals from the attached bacteria and biofilm weakened. In this study, we tried improved EIS measurement to monitor bacterial adhesion and biofilm maturation using a double-layer capacitance. In this improved method, we minimized background signal by subtracting the interference of electrolyte caused by bacterial metabolism. Pseudomonas aeruginosa PA14 wild type and wspF mutant that form the biofilm of distinct nature were used for the model strains to test our method. During bacterial adhesion and biofilm maturation, EIS data were collected and equivalent circuit analysis was carried out to obtain constant phase element (CPE) values representing double-layer capacitance. Since the influence by the bacterial growth-related culture media condition was eliminated by adopting fresh electrolyte at the measurement, the contribution of attached bacteria and biofilm was exclusively measured. As a result, the bacterial adhesion at the early stage of biofilm development was specifically monitored from reduction in double-layer capacitance. Particularly, the plateau in double-layer capacitance appeared upon biofilm maturation, indicating that biofilm maturation could be expected beyond this point. In conclusion, this study found that measurement of double-layer capacitance based on EIS could provide a monitoring parameter suggesting bacterial adhesion and the initiation point of biofilm maturation.

  15. Electric Double-Layer Capacitor Based on an Ionic Clathrate Hydrate

    SciTech Connect

    Lee, Wonhee; Kwon, Minchul; Park, Seongmin; Lim, Dongwook; Cha, Jong-Ho; Lee, Huen

    2013-05-13

    Herein, we suggest a new approach to an electric double-layer capacitor (EDLC) that is based on a proton-conducting ionic clathrate hydrate (ICH). The ice-like structures of clathrate hydrates, which are comprised of host water molecules and guest ions, make them suitable for applications in EDLC electrolytes, owing to their high proton conductivities and thermal stabilities. The carbon materials in the ICH Me{sub 4}NOH[DOT OPERATOR]5H{sub 2}O show a high specific capacitance, reversible charge–discharge behavior, and a long cycle life. The ionic-hydrate complex provides the following advantages in comparison with conventional aqueous and polymer electrolytes: 1)The ICH does not cause leakage problems under normal EDLC operating conditions. 2)The hydrate material can be utilized itself, without requiring any pre-treatments or activation for proton conduction, thus shortening the preparation procedure of the EDLC. 3)The crystallization of the ICH makes it possible to tailor practical EDLC dimensions because of its fluidity as a liquid hydrate. 4)The hydrate solid electrolyte exhibits more-favorable electrochemical stability than aqueous and polymer electrolytes. Therefore, ICH materials are expected to find practical applications in versatile energy devices that incorporate electrochemical systems.

  16. Boosted output performance of triboelectric nanogenerator via electric double layer effect

    NASA Astrophysics Data System (ADS)

    Chun, Jinsung; Ye, Byeong Uk; Lee, Jae Won; Choi, Dukhyun; Kang, Chong-Yun; Kim, Sang-Woo; Wang, Zhong Lin; Baik, Jeong Min

    2016-10-01

    For existing triboelectric nanogenerators (TENGs), it is important to explore unique methods to further enhance the output power under realistic environments to speed up their commercialization. We report here a practical TENG composed of three layers, in which the key layer, an electric double layer, is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al. The efficient charge separation in the middle layer, based on Volta's electrophorus, results from sequential contact configuration of the TENG and direct electrical connection of the middle layer to the earth. A sustainable and enhanced output performance of 1.22 mA and 46.8 mW cm-2 under low frequency of 3 Hz is produced, giving over 16-fold enhancement in output power and corresponding to energy conversion efficiency of 22.4%. Finally, a portable power-supplying system, which provides enough d.c. power for charging a smart watch or phone battery, is also successfully developed.

  17. On the generation of double layers from ion- and electron-acoustic instabilities

    NASA Astrophysics Data System (ADS)

    Fu, Xiangrong; Cowee, Misa M.; Gary, S. Peter; Winske, Dan

    2016-03-01

    A plasma double layer (DL) is a nonlinear electrostatic structure that carries a uni-polar electric field parallel to the background magnetic field due to local charge separation. Past studies showed that DLs observed in space plasmas are mostly associated with the ion acoustic instability. Recent Van Allen Probes observations of parallel electric field structures traveling much faster than the ion acoustic speed have motivated a computational study to test the hypothesis that a new type of DLs—electron acoustic DLs—generated from the electron acoustic instability are responsible for these electric fields. Nonlinear particle-in-cell simulations yield negative results, i.e., the hypothetical electron acoustic DLs cannot be formed in a way similar to ion acoustic DLs. Linear theory analysis and the simulations show that the frequencies of electron acoustic waves are too high for ions to respond and maintain charge separation required by DLs. However, our results do show that local density perturbations in a two-electron-component plasma can result in unipolar-like electric field structures that propagate at the electron thermal speed, suggesting another potential explanation for the observations.

  18. Elucidating the DEP phenomena using a volumetric polarization approach with consideration of the electric double layer.

    PubMed

    Zhao, Yu; Brcka, Jozef; Faguet, Jacques; Zhang, Guigen

    2017-03-01

    Dielectrophoretic (DEP) phenomena have been explored to great success for various applications like particle sorting and separation. To elucidate the underlying mechanism and quantify the DEP force experienced by particles, the point-dipole and Maxwell Stress Tensor (MST) methods are commonly used. However, both methods exhibit their own limitations. For example, the point-dipole method is unable to fully capture the essence of particle-particle interactions and the MST method is not suitable for particles of non-homogeneous property. Moreover, both methods fare poorly when it comes to explaining DEP phenomena such as the dependence of crossover frequency on medium conductivity. To address these limitations, the authors have developed a new method, termed volumetric-integration method, with the aid of computational implementation, to reexamine the DEP phenomena, elucidate the governing mechanism, and quantify the DEP force. The effect of an electric double layer (EDL) on particles' crossover behavior is dealt with through consideration of the EDL structure along with surface ionic/molecular adsorption, unlike in other methods, where the EDL is accounted for through simply assigning a surface conductance value to the particles. For validation, by comparing with literature experimental data, the authors show that the new method can quantify the DEP force on not only homogeneous particles but also non-homogeneous ones, and predict particle-particle interactions fairly accurately. Moreover, the authors also show that the predicted dependence of crossover frequency on medium conductivity and particle size agrees very well with experimental measurements.

  19. High-surface-area nitrogen-doped reduced graphene oxide for electric double-layer capacitors

    SciTech Connect

    Youn, Hee-Chang; Bak, Seong-Min; Kim, Myeong-Seong; Jaye, Cherno; Fischer, Daniel A.; Lee, Chang-Wook; Yang, Xiao-Qing; Roh, Kwang Chul; Kim, Kwang-Bum

    2015-06-08

    A two-step method consisting of solid-state microwave irradiation and heat treatment under NH₃ gas was used to prepare nitrogen-doped reduced graphene oxide (N-RGO) with a high specific surface area (1007m²g⁻¹), high electrical conductivity (1532S m⁻¹), and low oxygen content (1.5 wt%) for electric double-layer capacitor applications. The specific capacitance of N-RGO was 291 Fg⁻¹ at a current density of 1 A g⁻¹, and a capacitance of 261 F g⁻¹ was retained at 50 A g⁻¹, indicating a very good rate capability. N-RGO also showed excellent cycling stability, preserving 96% of the initial specific capacitance after 100,000 cycles. Near-edge X-ray absorption fine-structure spectroscopy evidenced the recover of π-conjugation in the carbon networks with the removal of oxygenated groups and revealed the chemical bonding of the nitrogen atoms in N-RGO. The good electrochemical performance of N-RGO is attributed to its high surface area, high electrical conductivity, and low oxygen content.

  20. Evolution of electronic states in n-type copper oxide superconductor via electric double layer gating.

    PubMed

    Jin, Kui; Hu, Wei; Zhu, Beiyi; Kim, Dohun; Yuan, Jie; Sun, Yujie; Xiang, Tao; Fuhrer, Michael S; Takeuchi, Ichiro; Greene, Richard L

    2016-05-25

    The occurrence of electrons and holes in n-type copper oxides has been achieved by chemical doping, pressure, and/or deoxygenation. However, the observed electronic properties are blurred by the concomitant effects such as change of lattice structure, disorder, etc. Here, we report on successful tuning the electronic band structure of n-type Pr2-xCexCuO4 (x = 0.15) ultrathin films, via the electric double layer transistor technique. Abnormal transport properties, such as multiple sign reversals of Hall resistivity in normal and mixed states, have been revealed within an electrostatic field in range of -2 V to + 2 V, as well as varying the temperature and magnetic field. In the mixed state, the intrinsic anomalous Hall conductivity invokes the contribution of both electron and hole-bands as well as the energy dependent density of states near the Fermi level. The two-band model can also describe the normal state transport properties well, whereas the carrier concentrations of electrons and holes are always enhanced or depressed simultaneously in electric fields. This is in contrast to the scenario of Fermi surface reconstruction by antiferromagnetism, where an anti-correlation is commonly expected.

  1. Bimodal behaviour of charge carriers in graphene induced by electric double layer

    PubMed Central

    Tsai, Sing-Jyun; Yang, Ruey-Jen

    2016-01-01

    A theoretical investigation is performed into the electronic properties of graphene in the presence of liquid as a function of the contact area ratio. It is shown that the electric double layer (EDL) formed at the interface of the graphene and the liquid causes an overlap of the conduction bands and valance bands and increases the density of state (DOS) at the Fermi energy (EF). In other words, a greater number of charge carriers are induced for transport and the graphene changes from a semiconductor to a semimetal. In addition, it is shown that the dependence of the DOS at EF on the contact area ratio has a bimodal distribution which responses to the experimental observation, a pinnacle curve. The maximum number of induced carriers is expected to occur at contact area ratios of 40% and 60%. In general, the present results indicate that modulating the EDL provides an effective means of tuning the electronic properties of graphene in the presence of liquid. PMID:27464986

  2. Anomalous or regular capacitance? The influence of pore size dispersity on double-layer formation

    NASA Astrophysics Data System (ADS)

    Jäckel, N.; Rodner, M.; Schreiber, A.; Jeongwook, J.; Zeiger, M.; Aslan, M.; Weingarth, D.; Presser, V.

    2016-09-01

    The energy storage mechanism of electric double-layer capacitors is governed by ion electrosorption at the electrode surface. This process requires high surface area electrodes, typically highly porous carbons. In common organic electrolytes, bare ion sizes are below one nanometer but they are larger when we consider their solvation shell. In contrast, ionic liquid electrolytes are free of solvent molecules, but cation-anion coordination requires special consideration. By matching pore size and ion size, two seemingly conflicting views have emerged: either an increase in specific capacitance with smaller pore size or a constant capacitance contribution of all micro- and mesopores. In our work, we revisit this issue by using a comprehensive set of electrochemical data and a pore size incremental analysis to identify the influence of certain ranges in the pore size distribution to the ion electrosorption capacity. We see a difference in solvation of ions in organic electrolytes depending on the applied voltage and a cation-anion interaction of ionic liquids in nanometer sized pores.

  3. Double-layer weekly sustained release transdermal patch containing gestodene and ethinylestradiol.

    PubMed

    Gao, Yanli; Liang, Jinying; Liu, Jianping; Xiao, Yan

    2009-07-30

    The combination therapy of gestodene (GEST) and ethinylestradiol (EE) has shown advanced contraception effect and lower side effect. The present study was designed to develop a weekly sustained release matrix type transdermal patch containing GEST and EE using blends of different polymeric combinations. The multiple-layer technique was adopted in order to maintain a steady permeation flux for 7 days. The effects of polymer types, polymer ratios, permeation enhancers, drug loadings and drug ratios in different layers on the skin permeations of the drugs were evaluated using excised mice skin. Polariscope examination was carried out to observe the drug distribution behavior. The formulation with the mixture of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) (7:1) was found to provide the regular release and propylene glycol (PG) could enhance the permeation fluxes of drugs. Double-layer transdermal drug delivery system (TDDS) could sustain the steady permeation flux of drugs for 7 days when the ratio of drug in drug release layer and drug reservoir layer was 1:4 with the identical total drug amount. The in vitro transdermal permeation fluxes were 0.377 microg/cm(2)/h and 0.092 microg/cm(2)/h, for GEST and EE respectively. The uniformity of dosage units test showed that the distribution of drugs in the matrix was homogeneous, which was further demonstrated by the polariscope result. The developed transdermal delivery system containing GEST and EE could be a promising non-oral contraceptive method.

  4. Spin transport in tantalum studied using magnetic single and double layers

    NASA Astrophysics Data System (ADS)

    Montoya, Eric; Omelchenko, Pavlo; Coutts, Chris; Lee-Hone, Nicholas R.; Hübner, René; Broun, David; Heinrich, Bret; Girt, Erol

    2016-08-01

    We report on spin transport in sputter-grown Ta films measured by ferromagnetic resonance. Spin diffusion length and spin mixing conductance are determined from magnetic damping measurements for a varying thickness of Ta layer 0 ≤dTa≤10 nm. The different boundary conditions of single- and double-magnetic-layer heterostructures Py |Ta and Py |Ta | [Py |Fe ] allow us to significantly narrow down the parameter space and test various models. We show that a common approach of using bulk resistivity value in the analysis yields inconsistent spin diffusion length and spin mixing conductance values for magnetic single- and double-layer structures. X-ray diffraction shows that bulk Ta is a combination of β -Ta and bcc-Ta . However, in the region of significant spin transport, ≲2 nm, there is an intermediate region of growth where the Ta lacks long-range structural order, as observed by transmission electron microscopy. Thickness-dependent resistivity measurements confirm that the bulk and intermediate regions have significantly different resistivity values. We find that the data can be well represented if the intermediate region resistivity value is used in the analysis. Additionally, the data can be fit if resistivity has the measured thickness dependence and spin diffusion length is restricted to be inversely proportional to resistivity. Finally, we rule out a model in which spin diffusion length is a constant, while the resistivity has the measured thickness dependence.

  5. Evaluation of the constant potential method in simulating electric double-layer capacitors

    SciTech Connect

    Wang, Zhenxing; Laird, Brian B.; Yang, Yang; Olmsted, David L.; Asta, Mark

    2014-11-14

    A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations in the electrolyte solution. In this work, we evaluate and compare this Fixed Charge Method (FCM) with the more realistic Constant Potential Method (CPM), [S. K. Reed et al., J. Chem. Phys. 126, 084704 (2007)], in which the electrode charges fluctuate in order to maintain constant electric potential in each electrode. For this comparison, we utilize a simplified LiClO{sub 4}-acetonitrile/graphite EDLC. At low potential difference (ΔΨ ⩽ 2 V), the two methods yield essentially identical results for ion and solvent density profiles; however, significant differences appear at higher ΔΨ. At ΔΨ ⩾ 4 V, the CPM ion density profiles show significant enhancement (over FCM) of “inner-sphere adsorbed” Li{sup +} ions very close to the electrode surface. The ability of the CPM electrode to respond to local charge fluctuations in the electrolyte is seen to significantly lower the energy (and barrier) for the approach of Li{sup +} ions to the electrode surface.

  6. Evolution of electronic states in n-type copper oxide superconductor via electric double layer gating

    NASA Astrophysics Data System (ADS)

    Jin, Kui; Hu, Wei; Zhu, Beiyi; Kim, Dohun; Yuan, Jie; Sun, Yujie; Xiang, Tao; Fuhrer, Michael S.; Takeuchi, Ichiro; Greene, Richard. L.

    2016-05-01

    The occurrence of electrons and holes in n-type copper oxides has been achieved by chemical doping, pressure, and/or deoxygenation. However, the observed electronic properties are blurred by the concomitant effects such as change of lattice structure, disorder, etc. Here, we report on successful tuning the electronic band structure of n-type Pr2‑xCexCuO4 (x = 0.15) ultrathin films, via the electric double layer transistor technique. Abnormal transport properties, such as multiple sign reversals of Hall resistivity in normal and mixed states, have been revealed within an electrostatic field in range of ‑2 V to + 2 V, as well as varying the temperature and magnetic field. In the mixed state, the intrinsic anomalous Hall conductivity invokes the contribution of both electron and hole-bands as well as the energy dependent density of states near the Fermi level. The two-band model can also describe the normal state transport properties well, whereas the carrier concentrations of electrons and holes are always enhanced or depressed simultaneously in electric fields. This is in contrast to the scenario of Fermi surface reconstruction by antiferromagnetism, where an anti-correlation is commonly expected.

  7. Environmentally friendly power generator based on moving liquid dielectric and double layer effect

    PubMed Central

    Huynh, D. H.; Nguyen, T. C.; Nguyen, P. D.; Abeyrathne, C. D.; Hossain, Md. S.; Evans, R.; Skafidas, E.

    2016-01-01

    An electrostatic power generator converts mechanical energy to electrical energy by utilising the principle of variable capacitance. This change in capacitance is usually achieved by varying the gap or overlap between two parallel metallic plates. This paper proposes a novel electrostatic micro power generator where the change in capacitance is achieved by the movement of an aqueous solution of NaCl. A significant change in capacitance is achieved due to the higher than air dielectric constant of water and the Helmholtz double layer capacitor formed by ion separation at the electrode interfaces. The proposed device has significant advantages over traditional electrostatic devices which include low bias voltage and low mechanical frequency of operation. This is critical if the proposed device is to have utility in harvesting power from the environment. A figure of merit exceeding 10000(108μW)/(mm2HzV2) which is two orders of magnitude greater than previous devices, is demonstrated for a prototype operating at a bias voltage of 1.2 V and a droplet frequency of 6 Hz. Concepts are presented for large scale power harvesting. PMID:27255577

  8. Electric-double-layer field-effect transistors with ionic liquids.

    PubMed

    Fujimoto, Takuya; Awaga, Kunio

    2013-06-21

    Charge carrier control is a key issue in the development of electronic functions of semiconductive materials. Beyond the simple enhancement of conductivity, high charge carrier accumulation can realize various phenomena, such as chemical reaction, phase transition, magnetic ordering, and superconductivity. Electric double layers (EDLs), formed at solid-electrolyte interfaces, induce extremely large electric fields. This results in a high charge carrier accumulation in the solid, much more effectively than solid dielectric materials. In the present review, we describe recent developments in the field-effect transistors (FETs) with gate dielectrics of ionic liquids, which have attracted much attention due to their wide electrochemical windows, low vapor pressures, and high chemical and physical stability. We explain the capacitance effects of ionic liquids, and describe the various combinations of ionic liquids and organic and inorganic semiconductors that are used to achieve such effects as high transistor performance, insulator-metal transitions, superconductivity, and ferromagnetism, in addition to the applications of the ionic-liquid EDL-FETs in logic devices. We discuss the factors controlling the mobility and threshold voltage in these types of FETs, and show the ionic liquid dependence of the transistor performance.

  9. Bias-free, solar-charged electric double-layer capacitors.

    PubMed

    Wu, Hao; Geng, Jing; Wang, Yuhang; Wang, Yanli; Peng, Zheng; Zheng, Gengfeng

    2014-12-21

    The conversion of solar energy with simultaneous electric energy storage provides a promising means for optimizing energy utilization efficiency and reducing device volume. In this paper, a 3-dimensional mesoporous carbon coated branched TiO2 nanowire composite is rationally designed for direct conversion and storage of solar energy as electric double-layer capacitive energy. The 1-dimensional, crystalline TiO2 trunks serve as long light absorption and continuous charge transport pathways, and the high-density TiO2 branches can efficiently increase the contact area with the surface coated mesoporous carbon layers. In addition, the ordered and uniformed mesopores provide large pore sizes for electrolyte penetration, and a high surface area for charge absorption and storage. Under a 1-sun illumination and no external electric bias, this branched TiO2/mesoporous carbon composite exhibits specific capacitances of over 30 and 23.4 F g(-1), at current densities of 0.1 and 0.5 A g(-1), respectively. An excellent stability of >50 photocharging-electrical discharging cycles has also been demonstrated, suggesting the potential of further developing this hybrid material structure for simultaneous solar conversion and electric energy storage.

  10. Evaluation of the constant potential method in simulating electric double-layer capacitors.

    PubMed

    Wang, Zhenxing; Yang, Yang; Olmsted, David L; Asta, Mark; Laird, Brian B

    2014-11-14

    A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations in the electrolyte solution. In this work, we evaluate and compare this Fixed Charge Method (FCM) with the more realistic Constant Potential Method (CPM), [S. K. Reed et al., J. Chem. Phys. 126, 084704 (2007)], in which the electrode charges fluctuate in order to maintain constant electric potential in each electrode. For this comparison, we utilize a simplified LiClO4-acetonitrile/graphite EDLC. At low potential difference (ΔΨ ⩽ 2 V), the two methods yield essentially identical results for ion and solvent density profiles; however, significant differences appear at higher ΔΨ. At ΔΨ ⩾ 4 V, the CPM ion density profiles show significant enhancement (over FCM) of "inner-sphere adsorbed" Li(+) ions very close to the electrode surface. The ability of the CPM electrode to respond to local charge fluctuations in the electrolyte is seen to significantly lower the energy (and barrier) for the approach of Li(+) ions to the electrode surface.

  11. Multi-ionic effects on energy production based on double layer expansion by salinity exchange.

    PubMed

    Fernández, M M; Ahualli, S; Iglesias, Guillermo R; González-Caballero, Fernando; Delgado, Ángel V; Jiménez, M L

    2015-05-15

    It has been recently shown that the free energy change upon salinity mixing in river mouths can be harvested taking advantage of the fact that the capacitance of charged solid/liquid interfaces (electrical double layers, EDLs) depends strongly on the ionic composition of the liquid medium. This has led to a new generation of techniques called Capmix technologies, one of them (CDLE or capacitive energy extraction based on DL expansion) based precisely on such dependence. Despite the solution composition playing a crucial role on the whole process, most of the research carried out so far has mainly focused on pure sodium chloride solutions. However, the effect of other species usually present in river and seawaters should be considered both theoretically and experimentally in order to succeed in optimizing a future device. In this paper, we analyse solutions of a more realistic composition from two points of view. Firstly, we find both experimentally and theoretically that the presence of ions other than sodium and chloride, even at low concentrations, may lead to a lower energy extraction in the process. Secondly, we experimentally consider the possible effects of other materials usually dispersed in natural water (mineral particles, microbes, shells, pollutants) by checking their accumulation in the carbon films used, after being exposed for a long period to natural sea water during CDLE cycles.

  12. Enhancing the Capacitive Performance of Electric Double-Layer Capacitors with Ionic Liquid Mixtures

    SciTech Connect

    Lian, C.; Liu, K.; Van Aken, Katherine L.; Gogotsi, Yury G.; Wesolowski, David J.; Liu, Honglai; Jiang, D. E.; Wu, Jianzhong

    2016-04-18

    Formulating room-temperature ionic liquid (RTIL) mixed electrolytes was recently proposed as an effective and convenient strategy to increase the capacitive performance of electrochemical capacitors. In this paper, we investigate the electrical double-layer (EDL) structure and the capacitance of two RTILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF4), and their mixtures with onion-like carbon electrodes using experiment and classical density functional theory. The principal difference between these ionic liquids is the smaller diameter of the BF4 anion relative to the TFSI anion and the EMI+ cation. A volcano-shaped trend is identified for the capacitance versus the composition of the RTIL mixture. The mixture effect, which makes more counterions pack on and more co-ions leave from the electrode surface, leads to an increase of the counterion density within the EDL and thus a larger capacitance. Finally, these theoretical predictions are in good agreement with our experimental observations and offer guidance for designing RTIL mixtures for EDL supercapacitors.

  13. Enhancing the Capacitive Performance of Electric Double-Layer Capacitors with Ionic Liquid Mixtures

    DOE PAGES

    Lian, C.; Liu, K.; Van Aken, Katherine L.; ...

    2016-04-18

    Formulating room-temperature ionic liquid (RTIL) mixed electrolytes was recently proposed as an effective and convenient strategy to increase the capacitive performance of electrochemical capacitors. In this paper, we investigate the electrical double-layer (EDL) structure and the capacitance of two RTILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF4), and their mixtures with onion-like carbon electrodes using experiment and classical density functional theory. The principal difference between these ionic liquids is the smaller diameter of the BF4– anion relative to the TFSI– anion and the EMI+ cation. A volcano-shaped trend is identified for the capacitance versus the composition of the RTIL mixture.more » The mixture effect, which makes more counterions pack on and more co-ions leave from the electrode surface, leads to an increase of the counterion density within the EDL and thus a larger capacitance. Finally, these theoretical predictions are in good agreement with our experimental observations and offer guidance for designing RTIL mixtures for EDL supercapacitors.« less

  14. High-Surface-Area Nitrogen-Doped Reduced Graphene Oxide for Electric Double-Layer Capacitors.

    PubMed

    Youn, Hee-Chang; Bak, Seong-Min; Kim, Myeong-Seong; Jaye, Cherno; Fischer, Daniel A; Lee, Chang-Wook; Yang, Xiao-Qing; Roh, Kwang Chul; Kim, Kwang-Bum

    2015-06-08

    A two-step method consisting of solid-state microwave irradiation and heat treatment under NH3 gas was used to prepare nitrogen-doped reduced graphene oxide (N-RGO) with a high specific surface area (1007 m(2)  g(-1) ), high electrical conductivity (1532 S m(-1) ), and low oxygen content (1.5 wt %) for electrical double-layer capacitor applications. The specific capacitance of N-RGO was 291 F g(-1) at a current density of 1 A g(-1) , and a capacitance of 261 F g(-1) was retained at 50 A g(-1) , which indicated a very good rate capability. N-RGO also showed excellent cycling stability and preserved 96 % of the initial specific capacitance after 100 000 cycles. Near-edge X-ray absorption fine-structure spectroscopy results provided evidenced for the recovery of π conjugation in the carbon networks with the removal of oxygenated groups and revealed chemical bonding of the nitrogen atoms in N-RGO. The good electrochemical performance of N-RGO is attributed to its high surface area, high electrical conductivity, and low oxygen content.

  15. Electric potential calculation in molecular simulation of electric double layer capacitors

    NASA Astrophysics Data System (ADS)

    Wang, Zhenxing; Olmsted, David L.; Asta, Mark; Laird, Brian B.

    2016-11-01

    For the molecular simulation of electric double layer capacitors (EDLCs), a number of methods have been proposed and implemented to determine the one-dimensional electric potential profile between the two electrodes at a fixed potential difference. In this work, we compare several of these methods for a model LiClO4-acetonitrile/graphite EDLC simulated using both the traditional fixed-charged method (FCM), in which a fixed charge is assigned a priori to the electrode atoms, or the recently developed constant potential method (CPM) (2007 J. Chem. Phys. 126 084704), where the electrode charges are allowed to fluctuate to keep the potential fixed. Based on an analysis of the full three-dimensional electric potential field, we suggest a method for determining the averaged one-dimensional electric potential profile that can be applied to both the FCM and CPM simulations. Compared to traditional methods based on numerically solving the one-dimensional Poisson’s equation, this method yields better accuracy and no supplemental assumptions.

  16. Evaluation of the constant potential method in simulating electric double-layer capacitors

    NASA Astrophysics Data System (ADS)

    Wang, Zhenxing; Yang, Yang; Olmsted, David L.; Asta, Mark; Laird, Brian B.

    2014-11-01

    A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations in the electrolyte solution. In this work, we evaluate and compare this Fixed Charge Method (FCM) with the more realistic Constant Potential Method (CPM), [S. K. Reed et al., J. Chem. Phys. 126, 084704 (2007)], in which the electrode charges fluctuate in order to maintain constant electric potential in each electrode. For this comparison, we utilize a simplified LiClO4-acetonitrile/graphite EDLC. At low potential difference (ΔΨ ⩽ 2 V), the two methods yield essentially identical results for ion and solvent density profiles; however, significant differences appear at higher ΔΨ. At ΔΨ ⩾ 4 V, the CPM ion density profiles show significant enhancement (over FCM) of "inner-sphere adsorbed" Li+ ions very close to the electrode surface. The ability of the CPM electrode to respond to local charge fluctuations in the electrolyte is seen to significantly lower the energy (and barrier) for the approach of Li+ ions to the electrode surface.

  17. High-surface-area nitrogen-doped reduced graphene oxide for electric double-layer capacitors

    DOE PAGES

    Youn, Hee-Chang; Bak, Seong-Min; Kim, Myeong-Seong; ...

    2015-06-08

    A two-step method consisting of solid-state microwave irradiation and heat treatment under NH₃ gas was used to prepare nitrogen-doped reduced graphene oxide (N-RGO) with a high specific surface area (1007m²g⁻¹), high electrical conductivity (1532S m⁻¹), and low oxygen content (1.5 wt%) for electric double-layer capacitor applications. The specific capacitance of N-RGO was 291 Fg⁻¹ at a current density of 1 A g⁻¹, and a capacitance of 261 F g⁻¹ was retained at 50 A g⁻¹, indicating a very good rate capability. N-RGO also showed excellent cycling stability, preserving 96% of the initial specific capacitance after 100,000 cycles. Near-edge X-ray absorptionmore » fine-structure spectroscopy evidenced the recover of π-conjugation in the carbon networks with the removal of oxygenated groups and revealed the chemical bonding of the nitrogen atoms in N-RGO. The good electrochemical performance of N-RGO is attributed to its high surface area, high electrical conductivity, and low oxygen content.« less

  18. Tetramethylammonium tetrafluoroborate: The smallest quaternary ammonium tetrafluoroborate salt for use in electrochemical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Park, Sieun; Kim, Ketack

    2017-01-01

    Tetramethylammonium (TMA) ion is the smallest quaternary ammonium ion (QAI) that can be used in electrochemical double layer capacitor (EDLC) applications. Small ions improve the capacitance of EDLCs by increasing the adsorbed ionic density. Herein, we first report the utilization of TMA BF4 in EDLCs and the properties of the smallest QAI are investigated. However, because of the poor solubility of TMA BF4, it must be combined with another salt, forming a binary-salt electrolyte. In this study, the maximum TMA BF4 concentration used was 5 mol%. These binary salt mixtures contain a conventional electrolyte salt such as tetraethylammonium BF4, trimethylethylammonium BF4, or spiro-bipyrrolidinium BF4. In addition, 4-5 mol% TMA BF4 was added to the conventional salt solution and a binary-salt electrolyte was obtained, leading to 12-13% increase in the capacitance compared to that of a 100 mol% conventional electrolyte at 10 A g-1. This work proposes a new method to improve the performance of EDLCs by using binary-salt electrolytes.

  19. The Double Layer Methodology and the Validation of Eigenbehavior Techniques Applied to Lifestyle Modeling

    PubMed Central

    Lamichhane, Bishal

    2017-01-01

    A novel methodology, the double layer methodology (DLM), for modeling an individual's lifestyle and its relationships with health indicators is presented. The DLM is applied to model behavioral routines emerging from self-reports of daily diet and activities, annotated by 21 healthy subjects over 2 weeks. Unsupervised clustering on the first layer of the DLM separated our population into two groups. Using eigendecomposition techniques on the second layer of the DLM, we could find activity and diet routines, predict behaviors in a portion of the day (with an accuracy of 88% for diet and 66% for activity), determine between day and between individual similarities, and detect individual's belonging to a group based on behavior (with an accuracy up to 64%). We found that clustering based on health indicators was mapped back into activity behaviors, but not into diet behaviors. In addition, we showed the limitations of eigendecomposition for lifestyle applications, in particular when applied to noisy and sparse behavioral data such as dietary information. Finally, we proposed the use of the DLM for supporting adaptive and personalized recommender systems for stimulating behavior change. PMID:28133607

  20. Theory of volumetric capacitance of an electric double-layer supercapacitor.

    PubMed

    Skinner, Brian; Chen, Tianran; Loth, M S; Shklovskii, B I

    2011-05-01

    Electric double-layer supercapacitors are a fast-rising class of high-power energy storage devices based on porous electrodes immersed in a concentrated electrolyte or ionic liquid. As yet there is no microscopic theory to describe their surprisingly large capacitance per unit volume (volumetric capacitance) of ~100 F/cm(3), nor is there a good understanding of the fundamental limits on volumetric capacitance. In this paper we present a non-mean-field theory of the volumetric capacitance of a supercapacitor that captures the discrete nature of the ions and the exponential screening of their repulsive interaction by the electrode. We consider analytically and via Monte Carlo simulations the case of an electrode made from a good metal and show that in this case the volumetric capacitance can reach the record values. We also study how the capacitance is reduced when the electrode is an imperfect metal characterized by some finite screening radius. Finally, we argue that a carbon electrode, despite its relatively large linear screening radius, can be approximated as a perfect metal because of its strong nonlinear screening. In this way the experimentally measured capacitance values of ~100 F/cm(3) may be understood.

  1. Molecular Dynamics Study of the Electrical Double Layer at Silver Chloride Electrolyte Interfaces

    SciTech Connect

    Zarzycki, Piotr P.; Kerisit, Sebastien N.; Rosso, Kevin M.

    2010-05-20

    Molecular dynamics simulations of the electrical double layer at AgCl/aqueous electrolyte (KCl) interfaces are presented, accompanied by a new force field and properties of bulk AgCl computed using planewave density functional theory. Long dynamics simulations were performed to estimate ion adsorption free energies at the AgCl surface. The simulations demonstrate formation of a bilayer hydration sheet composed of two sublayers of water molecules interconnected by hydrogen bonds. Potassium ions prefer to form an inner-sphere complex, whereas chloride ions prefer outer-sphere complexes. The adsorbed ions/water layers form a relatively rigid structure within the range of ionic strength considered, which confirms the applicability of the Helmholtz model in a high concentration regime. Profiles of the charge density, electric field and electrostatic potential across the simulation cell revealed that oscillations of water molecules govern these quantities. The electrostatic potential generated only by the electrolyte ions was used to study the quasi-Nernstian response of the silver chloride surface to the variation in the ionic strength.

  2. Langevin-Poisson-EQT: A dipolar solvent based quasi-continuum approach for electric double layers

    NASA Astrophysics Data System (ADS)

    Mashayak, S. Y.; Aluru, N. R.

    2017-01-01

    Water is a highly polar solvent. As a result, electrostatic interactions of interfacial water molecules play a dominant role in determining the distribution of ions in electric double layers (EDLs). Near a surface, an inhomogeneous and anisotropic arrangement of water molecules gives rise to pronounced variations in the electrostatic and hydration energies of ions. Therefore, a detailed description of the structural and dielectric properties of water is important to study EDLs. However, most theoretical models ignore the molecular effects of water and treat water as a background continuum with a uniform dielectric permittivity. Explicit consideration of water polarization and hydration of ions is both theoretically and numerically challenging. In this work, we present an empirical potential-based quasi-continuum theory (EQT) for EDL, which incorporates the polarization and hydration effects of water explicitly. In EQT, water molecules are modeled as Langevin point dipoles and a point dipole based coarse-grained model for water is developed systematically. The space dependence of the dielectric permittivity of water is included in the Poisson equation to compute the electrostatic potential. In addition, to reproduce hydration of ions, ion-water coarse-grained potentials are developed. We demonstrate the EQT framework for EDL by simulating NaCl aqueous electrolyte confined inside slit-like capacitor channels at various ion concentrations and surface charge densities. We show that the ion and water density predictions from EQT agree well with the reference molecular dynamics simulations.

  3. Concentration of simple aldehydes by sulfite-containing double-layer hydroxide minerals: implications for biopoesis

    NASA Technical Reports Server (NTRS)

    Pitsch, S.; Krishnamurthy, R.; Arrhenius, G.; Bada, J. L. (Principal Investigator)

    2000-01-01

    Environmental conditions play an important role in conceptual studies of prebiotically relevant chemical reactions that could have led to functional biomolecules. The necessary source compounds are likely to have been present in dilute solution, raising the question of how to achieve selective concentration and to reach activation. With the assumption of an initial 'RNA World', the questions of production, concentration, and interaction of aldehydes and aldehyde phosphates, potential precursors of sugar phosphates, come into the foreground. As a possible concentration process for simple, uncharged aldehydes, we investigated their adduct formation with sulfite ion bound in the interlayer of positively charged expanding-sheet-structure double-layer hydroxide minerals. Minerals of this type, initially with chloride as interlayer counter anion, have previously been shown to induce concentration and subsequent aldolization of aldehyde phosphates to form tetrose, pentose, and hexose phosphates. The reversible uptake of the simple aldehydes formaldehyde, glycolaldehyde, and glyceraldehyde by adduct formation with the immobilized sulfite ions is characterized by equilibrium constants of K=1.5, 9, and 11, respectively. This translates into an observable uptake at concentrations exceeding 50 mM.

  4. Transport of ion beam in an annular magnetically expanding helicon double layer thruster

    SciTech Connect

    Zhang, Yunchao Charles, Christine; Boswell, Rod

    2014-06-15

    An ion beam generated by an annular double layer has been measured in a helicon thruster, which sustains a magnetised low-pressure (5.0 × 10{sup −4} Torr) argon plasma at a constant radio-frequency (13.56 MHz) power of 300 W. After the ion beam exits the annular structure, it merges into a solid centrally peaked structure in the diffusion chamber. As the annular ion beam moves towards the inner region in the diffusion chamber, a reversed-cone plasma wake (with a half opening angle of about 30°) is formed. This process is verified by measuring both the radial and axial distributions of the beam potential and beam current. The beam potential changes from a two-peak radial profile (maximum value ∼ 30 V, minimum value ∼ 22.5 V) to a flat (∼28 V) along the axial direction; similarly, the beam current changes from a two-peak to one-peak radial profile and the maximum value decreases by half. The inward cross-magnetic-field motion of the beam ions is caused by a divergent electric field in the source. Cross-field diffusion of electrons is also observed in the inner plume and is determined as being of non-ambipolar origin.

  5. Electrochemical cell studies based on non-aqueous magnesium electrolyte for electric double layer capacitor applications

    NASA Astrophysics Data System (ADS)

    Chandrasekaran, Ramasamy; Koh, Meiten; Yamauchi, Akiyoshi; Ishikawa, Masashi

    Performances of electric double layer capacitors (EDLCs) based on an activated carbon electrode with acetonitrile (ACN), propylene carbonate (PC), or a ternary electrolyte, i.e., PC:ethylene carbonate (EC):diethyl carbonate (DEC), at 1 mol dm -3 of magnesium perchlorate [Mg(ClO 4) 2] salt have been investigated. The electrochemical responses were studied by impedance spectroscopy, cyclic voltammetry, and galvanostatic charge-discharge experiments at 25 °C in a three-electrode configuration. For a comparative evaluation, lithium perchlorate (LiClO 4) salt-based systems were also evaluated. All the observed results showed typical EDLC characteristics within the potential range between 0 and 1 V vs. an Ag/Ag + reference electrode. The Mg-based systems exhibited similar or rather better performances than the corresponding Li-based electrolytes; in particular, the rate capability of Mg-based ACN and PC electrolytes was much better than the corresponding Li-based electrolytes, indicating the high accessibility and utility of activated carbon pores by solvated Mg ions.

  6. Visualizing monolayers with a water-soluble fluorophore to quantify adsorption, desorption, and the double layer

    PubMed Central

    Shieh, Ian C.; Zasadzinski, Joseph A.

    2015-01-01

    Contrast in confocal microscopy of phase-separated monolayers at the air–water interface can be generated by the selective adsorption of water-soluble fluorescent dyes to disordered monolayer phases. Optical sectioning minimizes the fluorescence signal from the subphase, whereas convolution of the measured point spread function with a simple box model of the interface provides quantitative assessment of the excess dye concentration associated with the monolayer. Coexisting liquid-expanded, liquid-condensed, and gas phases could be visualized due to differential dye adsorption in the liquid-expanded and gas phases. Dye preferentially adsorbed to the liquid-disordered phase during immiscible liquid–liquid phase coexistence, and the contrast persisted through the critical point as shown by characteristic circle-to-stripe shape transitions. The measured dye concentration in the disordered phase depended on the phase composition and surface pressure, and the dye was expelled from the film at the end of coexistence. The excess concentration of a cationic dye within the double layer adjacent to an anionic phospholipid monolayer was quantified as a function of subphase ionic strength, and the changes in measured excess agreed with those predicted by the mean-field Gouy–Chapman equations. This provided a rapid and noninvasive optical method of measuring the fractional dissociation of lipid headgroups and the monolayer surface potential. PMID:25675499

  7. Sound field measurement in a double layer cavitation cluster by rugged miniature needle hydrophones.

    PubMed

    Koch, Christian

    2016-03-01

    During multi-bubble cavitation the bubbles tend to organize themselves into clusters and thus the understanding of properties and dynamics of clustering is essential for controlling technical applications of cavitation. Sound field measurements are a potential technique to provide valuable experimental information about the status of cavitation clouds. Using purpose-made, rugged, wide band, and small-sized needle hydrophones, sound field measurements in bubble clusters were performed and time-dependent sound pressure waveforms were acquired and analyzed in the frequency domain up to 20 MHz. The cavitation clusters were synchronously observed by an electron multiplying charge-coupled device (EMCCD) camera and the relation between the sound field measurements and cluster behaviour was investigated. Depending on the driving power, three ranges could be identified and characteristic properties were assigned. At low power settings no transient and no or very low stable cavitation activity can be observed. The medium range is characterized by strong pressure peaks and various bubble cluster forms. At high power a stable double layer was observed which grew with further increasing power and became quite dynamic. The sound field was irregular and the fundamental at driving frequency decreased. Between the bubble clouds completely different sound field properties were found in comparison to those in the cloud where the cavitation activity is high. In between the sound field pressure amplitude was quite small and no collapses were detected.

  8. Electric Double-Layer Capacitor Module with Series-Parallel Reconfigurable Cell Voltage Equalizers

    NASA Astrophysics Data System (ADS)

    Uno, Masatoshi; Kukita, Akio; Tanaka, Koji

    When electric double-layer capacitors (EDLCs) are connected in series, cell voltage imbalance that results due to non-uniform cell properties is observed. Cell voltage imbalance should be minimized to prolong cycle lives and maximize the available energy of cells. In this study, we propose a series-parallel reconfigurable cell voltage equalizer that is considered suitable for energy-storage systems using EDLCs instead of traditional secondary batteries as main energy-storage sources. The proposed equalizer requires only EDLCs and switches as its main circuit elements, and it utilizes EDLCs not only for energy storage but also for equalization. An equivalent circuit model using equivalent resistors that can be regarded as an index of equalization speed is developed. Current distribution and cell voltage imbalance during operation are quantitatively generalized. Experimental charge-discharge tests were performed for EDLC modules to demonstrate the performance of the cell voltage equalizer. All the cells in the modules could be charged/discharged uniformly even when a degradation-mimicking cell was intentionally included in the module. The resultant cell voltage imbalances and current distributions were in good agreement with those predicted by mathematical analyses.

  9. Solitary and double-layer structures in quantum bi-ion plasma

    NASA Astrophysics Data System (ADS)

    Shahmansouri, Mehran; Tribeche, Mouloud

    2016-06-01

    Weak ion-acoustic solitary waves (IASWs) in an unmagnetized quantum plasmas having two-fluid ions and fluid electrons are considered. Using the one-dimensional quantum hydrodynamics model and then the reductive perturbation technique, a generalized form of nonlinear quantum Korteweg-de Vries (KdV) equation governing the dynamics of weak ion acoustic solitary waves is derived. The effects of ion population, warm ion temperature, quantum diffraction, and polarity of ions on the nonlinear properties of these IASWs are analyzed. It is found that our present plasma model may support compressive as well as rarefactive solitary structures. Furthermore, formation and characteristics properties of IA double layers in the present bi-ion plasma model are investigated. The results of this work should be useful and applicable in understanding the wide relevance of nonlinear features of localized electro-acoustic structures in laboratory and space plasma, such as in super-dense astrophysical objects [24] and in the Earth's magnetotail region (Parks [43]. The implications of our results in some space plasma situations are discussed.

  10. Electro-acoustic solitary waves and double layers in a quantum plasma

    NASA Astrophysics Data System (ADS)

    Dip, P. R.; Hossen, M. A.; Salahuddin, M.; Mamun, A. A.

    2017-02-01

    A meticulous theoretical investigation has carried out to study the properties related to the higher-order nonlinearity of the electro-acoustic waves, specifically ion-acoustic (IA) waves in an unmagnetized, collisionless, quantum electron-positron-ion (EPI) plasma. The plasma system is supposed to be formed of positively charged inertial heavy ions, inertialess electrons and positrons. The reductive perturbation technique is employed to derive the modified Korteweg-de Vries (mK-dV) equation to analyze the solitary waves (SWs), and the standard Gardner (SG) equation to analyze the higher-order SWs as well as double layers (DLs). The basic features (viz. amplitude, width, phase speed, etc.) of the IA SWs and DLs are examined. The comparison between the mK-dV SWs and SG SWs is also made. It is found that the amplitude, width, phase speed, etc. of the IA SWs and DLs are significantly modified by the effects of the both Fermi temperatures as well as pressures and Bohm potentials of electrons and positrons. Our findings may be useful in explaining the physics behind the formation of the IA waves in both astrophysical and laboratory EPI plasmas (viz. white dwarfs, laser-solid matter interaction experiments, etc.).

  11. One-step synthesis of hierarchically porous carbons for high-performance electric double layer supercapacitors

    NASA Astrophysics Data System (ADS)

    Zhang, Haitao; Zhang, Lei; Chen, Jun; Su, Hai; Liu, Fangyan; Yang, Weiqing

    2016-05-01

    With plenty of unique porous structure at micro-/nano scale, hierarchically porous carbons (HPCs) are promising for usage in advanced electric double layer supercapacitors (EDLCs) as the electrode materials. However, wide-range adoption of HPC for practical application is largely shadowed by its extremely complex synthesis process with considerably low production efficiency. Herein we reported a simple template-free, one-step sintering method, to massively produce the HPCs for high-performance EDLCs. Resorting to the 3D structure modification of the wide pore size distribution, high surface area of HPCs (up to 3000 m2 g-1) was achieved. By using 1 M Na2SO4 as electrolyte, the as-fabricated HPCs based EDLCs can be operated reversibly over a wide voltage window of 1.6 V with superior specific capacitance of 240 F g-1 under a current density of 0.5 A g-1. In the meanwhile, the EDLCs exhibit excellent rate capability (high power density of 16 kW kg-1 at 10.2 Wh kg-1) and long-term cycling stability with 9% loss of its initial capacitance after 2000 cycles. This output performance distinguished itself among most of the carbon-based EDLCs with neutral aqueous electrolyte. Thus, the template-free one-step sintering method produced HPCs for EDLCs represents a new approach for high-performance energy storage.

  12. Some aspects of double layer formation in a plasma constrained by a magnetic mirror

    NASA Technical Reports Server (NTRS)

    Lennartsson, W.

    1987-01-01

    The shift from wave-generated anomalous resistivity toward the more large-scale effects of magnetic confinement of current carrying plasmas was inspired by the more extensive data on auroral particle distribution functions that were made available, data that may often seem consistent with a dissipation-free acceleration of auroral electrons over an extended altitude range. Efforts to interpret these data have brought new vigor to the concept that a smooth and static electric field can be self-consistently generated by suitable pitch angle anisotropies among the high altitude particle populations, different for electrons and ions, and that such an electric field is both necessary and sufficient to maintain the plasma in a quasi-neutral steady state. Certain aspects of this concept are reviewed and criticized, both from a general theoretical standpoint and from the standpoint of what is known about the magnetospheric environment. It is argued that this concept has flaws and that the actual physical problem is considerably more complicated, requiring a more complex electric field, possibly including double layer structures.

  13. "Squishy capacitor" model for electrical double layers and the stability of charged interfaces.

    PubMed

    Partenskii, Michael B; Jordan, Peter C

    2009-07-01

    Negative capacitance (NC), predicted by various electrical double layer (EDL) theories, is critically reviewed. Physically possible for individual components of the EDL, the compact or diffuse layer, it is strictly prohibited for the whole EDL or for an electrochemical cell with two electrodes. However, NC is allowed for the artificial conditions of sigma control, where an EDL is described by the equilibrium electric response of electrolyte to a field of fixed, and typically uniform, surface charge-density distributions, sigma. The contradiction is only apparent; in fact local sigma cannot be set independently, but is established by the equilibrium response to physically controllable variables, i.e., applied voltage phi (phi control) or total surface charge q (q control). NC predictions in studies based on sigma control signify potential instabilities and phase transitions for physically realizable conditions. Building on our previous study of phi control [M. B. Partenskii and P. C. Jordan, Phys. Rev. E 77, 061117 (2008)], here we analyze critical behavior under q control, clarifying the basic picture using an exactly solvable "squishy capacitor" toy model. We find that phi can change discontinuously in the presence of a lateral transition, specify stability conditions for an electrochemical cell, analyze the origin of the EDL's critical point in terms of compact and diffuse serial contributions, and discuss perspectives and challenges for theoretical studies not limited by sigma control.

  14. Evolution of Multiple Double Layer in Glow discharge and its inherent Properties

    NASA Astrophysics Data System (ADS)

    Alex, Prince; A, Saravanan; Sinha, Suraj

    2016-10-01

    Formation and evolution of multiple anodic double layers (MADLs) were experimentally studied in glow discharge plasma. The boundary condition for the existence of MADL was identified in terms of threshold bias and ambient working pressure. The MADL formation is accompanied by an explosive growth in anode current and consequent current-voltage characteristics follows a hysteresis loop. The analysis yield that stable MADLs is only observed when the control voltage V2 is between a certain critical values (Vq > νte MADL completely transforms to an intense high current carrying unstable anode glow. The floating potential analysis carried out using three axially positioned electrostatic probes shows a bipolar signature of DL with as the control parameter is varied. The floating potential analysis also shows that hysteresis arises due to the difference in magnitude of electric field required to align the space charges in the DL sheet at the control voltage changes forward and backward. The effect of pressure on MADL indicates that the MADL structure advances towards anode surface as the pressure is increases. The power dumped (W) in the MADL is estimated to decrease with increase in pressure while the same increase in the anode glow.

  15. An electrochemical double layer capacitor using an activated carbon electrode with gel electrolyte binder

    SciTech Connect

    Osaka, Tetsuya, Liu, X.; Nojima, Masashi; Momma, Toshiyuki

    1999-05-01

    An electric double layer capacitor (EDLC) was prepared with an activated carbon powder electrode with poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based gel electrolyte. Ethylene carbonate (EC) and propylene carbonate (PC) were used as plasticizer and tetraethylammonium tetrafluoroborate (TEABF{sub 4}) was used as the supporting electrolyte. An optimized gel electrolyte of PVdF-HFP/PC/EC/TEABF{sub 4} - 23/31/35/11 mass ratio exhibited high ionic conductivity of 5 {times} 10{sup {minus}3} S/cm, high electrode capacitance, and good mechanical strength. An electrode consisting of activated carbon (AC) with the gel electrolyte as the binder (AC/PVdF-HFP based gel, 7/3 mass ratio) showed a higher specific capacitance and a lower ion diffusion resistance within the electrode than a carbon electrode, prepared with PVdF-HFP binder without plasticizer. This suggests that an electrode mixed with the gel electrolyte has a lower ion diffusion resistance inside the electrode. The highest specific capacitance of 123 F/g was achieved with an electrode containing AC with a specific surface area of 2500 m{sup 2}/g. A coin-type EDLC cell with optimized components showed excellent cycleability exceeding 10{sup 4} cycles with ca. 100% coulombic efficiency achieved when charging and discharging was repeated between 1.0 and 2.5 V at 1.66 mA/cm{sup 2}.

  16. Boosted output performance of triboelectric nanogenerator via electric double layer effect

    PubMed Central

    Chun, Jinsung; Ye, Byeong Uk; Lee, Jae Won; Choi, Dukhyun; Kang, Chong-Yun; Kim, Sang-Woo; Wang, Zhong Lin; Baik, Jeong Min

    2016-01-01

    For existing triboelectric nanogenerators (TENGs), it is important to explore unique methods to further enhance the output power under realistic environments to speed up their commercialization. We report here a practical TENG composed of three layers, in which the key layer, an electric double layer, is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al. The efficient charge separation in the middle layer, based on Volta's electrophorus, results from sequential contact configuration of the TENG and direct electrical connection of the middle layer to the earth. A sustainable and enhanced output performance of 1.22 mA and 46.8 mW cm−2 under low frequency of 3 Hz is produced, giving over 16-fold enhancement in output power and corresponding to energy conversion efficiency of 22.4%. Finally, a portable power-supplying system, which provides enough d.c. power for charging a smart watch or phone battery, is also successfully developed. PMID:27703165

  17. Evolution of electronic states in n-type copper oxide superconductor via electric double layer gating

    PubMed Central

    Jin, Kui; Hu, Wei; Zhu, Beiyi; Kim, Dohun; Yuan, Jie; Sun, Yujie; Xiang, Tao; Fuhrer, Michael S.; Takeuchi, Ichiro; Greene, Richard. L.

    2016-01-01

    The occurrence of electrons and holes in n-type copper oxides has been achieved by chemical doping, pressure, and/or deoxygenation. However, the observed electronic properties are blurred by the concomitant effects such as change of lattice structure, disorder, etc. Here, we report on successful tuning the electronic band structure of n-type Pr2−xCexCuO4 (x = 0.15) ultrathin films, via the electric double layer transistor technique. Abnormal transport properties, such as multiple sign reversals of Hall resistivity in normal and mixed states, have been revealed within an electrostatic field in range of −2 V to + 2 V, as well as varying the temperature and magnetic field. In the mixed state, the intrinsic anomalous Hall conductivity invokes the contribution of both electron and hole-bands as well as the energy dependent density of states near the Fermi level. The two-band model can also describe the normal state transport properties well, whereas the carrier concentrations of electrons and holes are always enhanced or depressed simultaneously in electric fields. This is in contrast to the scenario of Fermi surface reconstruction by antiferromagnetism, where an anti-correlation is commonly expected. PMID:27221198

  18. Double-layer parallelization for hydrological model calibration on HPC systems

    NASA Astrophysics Data System (ADS)

    Zhang, Ang; Li, Tiejian; Si, Yuan; Liu, Ronghua; Shi, Haiyun; Li, Xiang; Li, Jiaye; Wu, Xia

    2016-04-01

    Large-scale problems that demand high precision have remarkably increased the computational time of numerical simulation models. Therefore, the parallelization of models has been widely implemented in recent years. However, computing time remains a major challenge when a large model is calibrated using optimization techniques. To overcome this difficulty, we proposed a double-layer parallel system for hydrological model calibration using high-performance computing (HPC) systems. The lower-layer parallelism is achieved using a hydrological model, the Digital Yellow River Integrated Model, which was parallelized by decomposing river basins. The upper-layer parallelism is achieved by simultaneous hydrological simulations with different parameter combinations in the same generation of the genetic algorithm and is implemented using the job scheduling functions of an HPC system. The proposed system was applied to the upstream of the Qingjian River basin, a sub-basin of the middle Yellow River, to calibrate the model effectively by making full use of the computing resources in the HPC system and to investigate the model's behavior under various parameter combinations. This approach is applicable to most of the existing hydrology models for many applications.

  19. Dynamics of double layers, ion acceleration, and heat flux suppression during solar flares

    SciTech Connect

    Li, T. C.; Drake, J. F.; Swisdak, M.

    2014-09-20

    Observations of flare-heated electrons in the corona typically suggest confinement of electrons. The confinement mechanism, however, remains unclear. The transport of coronal hot electrons into ambient plasma was recently investigated by particle-in-cell (PIC) simulations. Electron transport was significantly suppressed by the formation of a highly localized, nonlinear electrostatic potential in the form of a double layer (DL). In this work large-scale PIC simulations are performed to explore the dynamics of DLs in larger systems where, instead of a single DL, multiple DLs are generated. The primary DL accelerates return current electrons, resulting in high velocity electron beams that interact with ambient ions. This forms a Buneman unstable system that spawns more DLs. Trapping of heated return current electrons between multiple DLs strongly suppresses electron transport. DLs also accelerate ambient ions and produce strong ion flows over an extended region. This clarifies the mechanism by which hot electrons in the corona couple to and accelerate ions to form the solar wind. These new dynamics in larger systems reveal a more likely picture of DL development and their impact on the ambient plasma in the solar corona. They are applicable to the preparation for in situ coronal space missions like the Solar Probe Plus.

  20. Edge effects in vertically-oriented graphene based electric double-layer capacitors

    NASA Astrophysics Data System (ADS)

    Yang, Huachao; Yang, Jinyuan; Bo, Zheng; Zhang, Shuo; Yan, Jianhua; Cen, Kefa

    2016-08-01

    Vertically-oriented graphenes (VGs) have been demonstrated as a promising active material for electric double-layer capacitors (EDLCs), partially due to their edge-enriched structure. In this work, the 'edge effects', i.e., edges as the promoters of high capacitance, in VG based EDLCs are investigated with experimental research and numerical simulations. VGs with diverse heights (i.e., edge-to-basal ratios) and edge densities are prepared with varying the plasma-enabled growth time and employing different plasma sources. Electrochemical measurements show that the edges play a predominant role on the charge storage behavior of VGs. A simulation is further conducted to unveil the roles of the edges on the separation and adsorption of ions within VG channels. The initial charge distribution of a VG plane is obtained with density functional theory (DFT) calculations, which is subsequently applied to a molecular dynamics (MD) simulation system to gain the insights into the microscope EDLC structures. Compared with the basal planes, the edges present higher initial charge density (by 4.2 times), higher ion packing density (by 2.6 times), closer ion packing location (by 0.8 Å), and larger ion separation degree (by 14%). The as-obtained findings will be instructive in designing the morphology and structure of VGs for enhanced capacitive performances.

  1. Boosted output performance of triboelectric nanogenerator via electric double layer effect.

    PubMed

    Chun, Jinsung; Ye, Byeong Uk; Lee, Jae Won; Choi, Dukhyun; Kang, Chong-Yun; Kim, Sang-Woo; Wang, Zhong Lin; Baik, Jeong Min

    2016-10-05

    For existing triboelectric nanogenerators (TENGs), it is important to explore unique methods to further enhance the output power under realistic environments to speed up their commercialization. We report here a practical TENG composed of three layers, in which the key layer, an electric double layer, is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al. The efficient charge separation in the middle layer, based on Volta's electrophorus, results from sequential contact configuration of the TENG and direct electrical connection of the middle layer to the earth. A sustainable and enhanced output performance of 1.22 mA and 46.8 mW cm(-2) under low frequency of 3 Hz is produced, giving over 16-fold enhancement in output power and corresponding to energy conversion efficiency of 22.4%. Finally, a portable power-supplying system, which provides enough d.c. power for charging a smart watch or phone battery, is also successfully developed.

  2. Electric potential calculation in molecular simulation of electric double layer capacitors.

    PubMed

    Wang, Zhenxing; Olmsted, David L; Asta, Mark; Laird, Brian B

    2016-11-23

    For the molecular simulation of electric double layer capacitors (EDLCs), a number of methods have been proposed and implemented to determine the one-dimensional electric potential profile between the two electrodes at a fixed potential difference. In this work, we compare several of these methods for a model LiClO4-acetonitrile/graphite EDLC simulated using both the traditional fixed-charged method (FCM), in which a fixed charge is assigned a priori to the electrode atoms, or the recently developed constant potential method (CPM) (2007 J. Chem. Phys. 126 084704), where the electrode charges are allowed to fluctuate to keep the potential fixed. Based on an analysis of the full three-dimensional electric potential field, we suggest a method for determining the averaged one-dimensional electric potential profile that can be applied to both the FCM and CPM simulations. Compared to traditional methods based on numerically solving the one-dimensional Poisson's equation, this method yields better accuracy and no supplemental assumptions.

  3. Water Density in the Electric Double Layer at the Insulator/Electrolyte Solution Interface

    SciTech Connect

    Tikhonov,A.

    2006-01-01

    I studied the spatial structure of the thick transition region between n-hexane and a colloidal solution of 7-nm silica particles by X-ray reflectivity and grazing incidence small-angle scattering. The interfacial structure is discussed in terms of a semiquantitative interface model wherein the potential gradient at the n-hexane/sol interface reflects the difference in the potentials of 'image forces' between the cationic Na{sup +} and anions (nanoparticles) and the specific adsorption of surface charge at the interface between the adsorbed layer and the solution, as well as at the interface between the adsorbed layer and n-hexane. The X-ray scattering data revealed that the average density of water in the field {approx}10{sup 9}-10{sup 10} V/m of the electrical double layer at the hexane/silica sol interface is the same as, or only few percent higher (1-7%) than, its density under normal conditions.

  4. Composite Materials for Low-Temperature Applications

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Composite materials with improved thermal conductivity and good mechanical strength properties should allow for the design and construction of more thermally efficient components (such as pipes and valves) for use in fluid-processing systems. These materials should have wide application in any number of systems, including ground support equipment (GSE), lunar systems, and flight hardware that need reduced heat transfer. Researchers from the Polymer Science and Technology Laboratory and the Cryogenics Laboratory at Kennedy Space Center were able to develop a new series of composite materials that can meet NASA's needs for lightweight materials/composites for use in fluid systems and also expand the plastic-additive markets. With respect to thermal conductivity and physical properties, these materials are excellent alternatives to prior composite materials and can be used in the aerospace, automotive, military, electronics, food-packaging, and textile markets. One specific application of the polymeric composition is for use in tanks, pipes, valves, structural supports, and components for hot or cold fluid-processing systems where heat flow through materials is a problem to be avoided. These materials can also substitute for metals in cryogenic and other low-temperature applications. These organic/inorganic polymeric composite materials were invented with significant reduction in heat transfer properties. Decreases of 20 to 50 percent in thermal conductivity versus that of the unmodified polymer matrix were measured. These novel composite materials also maintain mechanical properties of the unmodified polymer matrix. These composite materials consist of an inorganic additive combined with a thermoplastic polymer material. The intrinsic, low thermal conductivity of the additive is imparted into the thermoplastic, resulting in a significant reduction in heat transfer over that of the base polymer itself, yet maintaining most of the polymer's original properties. Normal

  5. Low Temperature Trapping: from Reactions to Spectroscopy

    NASA Astrophysics Data System (ADS)

    Schlemmer, S.; Asvany, O.; Brunken, S.

    2013-06-01

    The kinetics of ion - molecule reactions are investigated in higher-order multipole traps by observation of the temporal evolution of mass selected parent ions in the presence of a neutral reaction partner. Rate coeffients for fast reactions (proceeding at collision rate) and very slow reactions (taking millions of collisions) are determined over a wide range of temperatures. Endothermic or hindered reactions can be promoted by excitation of the ion via absorption of a photon. Scanning the photon energy while detecting the number of product ions establishes an action spectroscopy method which we developed over the last 10-15 years and termed LIR: laser or light induced reactions. The main advantages of LIR are mass selection of the parent ion and low temperature conditions in the trap. Long storage times in combination with a near unity detection efficiency make LIR one of the most sensitive spectroscopy methods. The status quo of LIR will be discussed on selected examples. Recent measurements are concerned with ro-vibrational spectra of CH_2D^+ and CH_5^+ at highest resolution using cw OPO radiation. In the particular case of CH_5^+, the lines in the mid IR have been measured at a nominal temperature of 10 K and a frequency comb has been used for absolute calibration. Line positions can be determined to an accuracy which shall enable us in the future to obtain rotational spectra in a THz-IR double resonance approach. We tested the feasibility of this two photon method recently on H_2D^+. S. Schlemmer, T. Kuhn, E. Lescop, and D. Gerlich, Laser excited N_2^+ in a 22-Pole Trap: Experimental Studies of Rotational Relaxation Processes, Int. J. Mass Spectrometry and Ion Processes, 185-187, 589-602, (1999), S.D. Ivanov, O. Asvany, A. Witt, E. Hugo, G. Mathias, B. Redlich, D. Marx and S. Schlemmer, Quantum-induced symmetry breaking explains infrared spectra of CH_5^+ isotopologues, Nature Chemistry, 2, 298-302 (2010) S. Gaertner, J. Krieg, A. Klemann, O. Asvany and S

  6. Low Temperature Surface Carburization of Stainless Steels

    SciTech Connect

    Collins, Sunniva R; Heuer, Arthur H; Sikka, Vinod K

    2007-12-07

    Low-temperature colossal supersaturation (LTCSS) is a novel surface hardening method for carburization of austenitic stainless steels (SS) without the precipitation of carbides. The formation of carbides is kinetically suppressed, enabling extremely high or colossal carbon supersaturation. As a result, surface carbon concentrations in excess of 12 at. % are routinely achieved. This treatment increases the surface hardness by a factor of four to five, improving resistance to wear, corrosion, and fatigue, with significant retained ductility. LTCSS is a diffusional surface hardening process that provides a uniform and conformal hardened gradient surface with no risk of delamination or peeling. The treatment retains the austenitic phase and is completely non-magnetic. In addition, because parts are treated at low temperature, they do not distort or change dimensions. During this treatment, carbon diffusion proceeds into the metal at temperatures that constrain substitutional diffusion or mobility between the metal alloy elements. Though immobilized and unable to assemble to form carbides, chromium and similar alloying elements nonetheless draw enormous amounts of carbon into their interstitial spaces. The carbon in the interstitial spaces of the alloy crystals makes the surface harder than ever achieved before by more conventional heat treating or diffusion process. The carbon solid solution manifests a Vickers hardness often exceeding 1000 HV (equivalent to 70 HRC). This project objective was to extend the LTCSS treatment to other austenitic alloys, and to quantify improvements in fatigue, corrosion, and wear resistance. Highlights from the research include the following: • Extension of the applicability of the LTCSS process to a broad range of austenitic and duplex grades of steels • Demonstration of LTCSS ability for a variety of different component shapes and sizes • Detailed microstructural characterization of LTCSS-treated samples of 316L and other alloys

  7. Low temperature environmental degradation of zirconia ceramics

    NASA Astrophysics Data System (ADS)

    Zhao, Zhenbo

    2005-11-01

    The low temperature environmental degradation (LTED) of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) has been prevented, or at least retarded, by using both bulk doping and surface doping methods with either cation, or anion, stabilizers. The introduction of both mullite and alumina into 3Y-TZP by a bulk-doping method was found to be effective in suppressing the tetragonal-->monoclinic transformation induced by water during hydrothermal treatment thus giving rise to better mechanical properties. The beneficial effects of alumina on the phase stability of the 3Y-TZP ceramic are considered to be due to the increase in the elastic modulus of the constraining matrix, as well as to the segregation of A12O3 at grain boundaries. The LTED transformation kinetics as determined by x-ray diffraction (XRD) and White Light Interferometer (WLI) analysis showed that the isothermal tetragonal-to-monoclinic transformation starts from the surface and has an incubation-nucleation-growth mechanism which can be described by the Johnson-Mehl-Avrami equation. The degradation of Y-TZP ceramic after hydrothermal treatment can be effectively overcome by surface doping by a solid diffusion method with tetravalent dopants: CeO2 and GeO2; with trivalent dopants: La2O 3 and Fe2O3; and with divalent dopants: CuO and MgO. For surface CeO2-, GeO2- and Fe2O 3-doping, this degradation inhibition behaviour is attributed to a localized increase in cation stabilizer content which satisfies the requirements for stabilization of the tetragonal phase. However, in each case, the stability mechanisms are different. For surface La2O3doping, surface doping overcomes the formation of La2O3 and La 2Zr2O7 since the extra La2O3 can further diffuse to the center of the 3Y-TZP ceramic. For CuO-doping, small amounts of CuO form a liquid that can act as a conduit for the re-distribution of yttria. In the case of surface MgO modification, the stabilization results from the isolated nature of the

  8. Li-Ion Cell Development for Low Temperature Applications

    NASA Technical Reports Server (NTRS)

    Huang, C.-K.; Sakamoto, J. S.; Surampudi, S.; Wolfenstine, J.

    2000-01-01

    JPL is involved in the development of rechargeable Li-ion cells for future Mars Exploration Missions. The specific objectives are to improve the Li-ion cell cycle life performance and rate capability at low temperature (<<-20 C) in order to enhance survivability of the Mars lander and rover batteries. Poor Li-ion rate capability at low temperature has been attributed to: (1) the electrolytes becoming viscous or freezing and/or (2) reduced electrode capacity that results from decreased Li diffusivity. Our efforts focus on increasing the rate capability at low temperature for Li-ion cells. In order to improve the rate capability we evaluated the following: (1) cathode performance at low temperatures, (2) electrode active material particle size on low temperature performance and (3) Li diffusivity at room temperature and low temperatures. In this paper, we will discuss the results of our study.

  9. Effectiveness of Low Temperature Additives for Biodiesel Blends

    DTIC Science & Technology

    2012-06-30

    UNCLASSIFIED EFFECTIVENESS OF LOW TEMPERATURE ADDITIVES FOR BIODIESEL BLENDS INTERIM REPORT TFLRF No. 428 by Steven R...Do not return it to the originator. UNCLASSIFIED UNCLASSIFIED EFFECTIVENESS OF LOW TEMPERATURE ADDITIVES FOR BIODIESEL BLENDS...17-2010 – 06-30-2012 4. TITLE AND SUBTITLE Effectiveness of Low Temperature Additives for Biodiesel Blends 5a. CONTRACT NUMBER W56HZV-09-C-0100

  10. Double layering of a thermochemical plume in the upper mantle beneath Hawaii

    NASA Astrophysics Data System (ADS)

    Ballmer, M. D.; Ito, G.; Wolfe, C. J.; Cadio, C.; Solomon, S. C.

    2012-04-01

    stem of the plume and its non-eclogitic outskirts, it inflates to release a shallow thermal plume. This latter plume sustains hotspot volcanism and feeds a hot shallow pancake that compensates the seafloor swell. Our model predictions reconcile a range of characteristics for Hawaiian volcanism. We find that the small-scale convection that develops within the hot pancake2 is sufficient to support rejuvenated and arch volcanism, as well as to account for the apparent decrease of the geoid-to-topography ratio (GTR) along the Hawaiian Swell. The double layering of hot plume material (DEP and shallow pancake) forms a thick and asymmetric feature. Seismic resolution tests indicate that this double layering can account for the thick and asymmetric low-velocity body as imaged by PLUME. We also show that thermochemical plumes with slightly larger volumes of eclogitic material display pulsations from the DEP upwards, a behavior that can explain temporal variability of Hawaiian hotspot volcanism3. Finally, models with a diffuse distribution of eclogite in the plume give rise to bilateral asymmetry in the predicted contribution of mafic material to partial melting. Such lateral variability in the source of volcanism has been proposed to account for the prominent Loa-versus-Kea geochemical trends in Hawaiian lavas¹. Building on previous work for the lower mantle, our results reveal the relevance of thermochemical convection for the upper mantle, specifically for the overall dynamics of mantle plumes, the genesis of intraplate volcanism, and ocean-island geochemistry. ¹Sobolev, A.V., A.W. Hofmann, S.V. Sobolev, I.K. Nikogosian (2005) Nature 434, 590-597. 2Ballmer, M.D., G. Ito, J. van Hunen, P.J. Tackley (2011) Nature Geosci. 4, 457-460. 3van Ark, E., J. Lin (2004) J. Geophys. Res. 109, B11401.

  11. Low-temperature Hall effect in bismuth chalcogenides thin films

    NASA Astrophysics Data System (ADS)

    Kuntsevich, A. Yu.; Gabdullin, A. A.; Prudkogliad, V. A.; Selivanov, Yu. G.; Chizhevskii, E. G.; Pudalov, V. M.

    2016-12-01

    Bismuth chalcogenides are the most studied 3D topological insulators. As a rule, at low temperatures, thin films of these materials demonstrate positive magnetoresistance due to weak antilocalization. Weak antilocalization should lead to resistivity decrease at low temperatures; in experiments, however, resistivity grows as temperature decreases. From transport measurements for several thin films (with various carrier density, thickness, and carrier mobility), and by using a purely phenomenological approach, with no microscopic theory, we show that the low-temperature growth of the resistivity is accompanied by growth of the Hall coefficient, in agreement with the diffusive electron-electron interaction correction mechanism. Our data reasonably explain the low-temperature resistivity upturn.

  12. Synthesis, characterization, and antimicrobial properties of novel double layer nanocomposite electrospun fibers for wound dressing applications

    PubMed Central

    Hassiba, Alaa J; El Zowalaty, Mohamed E; Webster, Thomas J; Abdullah, Aboubakr M; Nasrallah, Gheyath K; Khalil, Khalil Abdelrazek; Luyt, Adriaan S; Elzatahry, Ahmed A

    2017-01-01

    Herein, novel hybrid nanomaterials were developed for wound dressing applications with antimicrobial properties. Electrospinning was used to fabricate a double layer nanocomposite nanofibrous mat consisting of an upper layer of poly(vinyl alcohol) and chitosan loaded with silver nanoparticles (AgNPs) and a lower layer of polyethylene oxide (PEO) or polyvinylpyrrolidone (PVP) nanofibers loaded with chlorhexidine (as an antiseptic). The top layer containing AgNPs, whose purpose was to protect the wound site against environmental germ invasion, was prepared by reducing silver nitrate to its nanoparticulate form through interaction with chitosan. The lower layer, which would be in direct contact with the injured site, contained the antibiotic drug needed to avoid wound infections which would otherwise interfere with the healing process. Initially, the upper layer was electrospun, followed sequentially by electrospinning the second layer, creating a bilayer nanofibrous mat. The morphology of the nanofibrous mats was studied by scanning electron microscopy and transmission electron microscopy, showing successful nanofiber production. X-ray diffraction confirmed the reduction of silver nitrate to AgNPs. Fourier transform infrared spectroscopy showed a successful incorporation of the material used in the produced nanofibrous mats. Thermal studies carried out by thermogravimetric analysis indicated that the PVP–drug-loaded layer had the highest thermal stability in comparison to other fabricated nanofibrous mats. Antimicrobial activities of the as-synthesized nanofibrous mats against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans were determined using disk diffusion method. The results indicated that the PEO–drug-loaded mat had the highest antibacterial activity, warranting further attention for numerous wound-healing applications. PMID:28356737

  13. Solid lipid nanoparticles coated with cross-linked polymeric double layer for oral delivery of curcumin.

    PubMed

    Wang, Taoran; Ma, Xiaoyu; Lei, Yu; Luo, Yangchao

    2016-12-01

    Solid lipid nanoparticles (SLNs) are regarded as promising carriers to improve the safety and effectiveness of delivery for drugs and nutrients, however, the clinic applications for oral administration are limited by their poor stability in gastrointestinal conditions. In this study, surface modification was explored to confer new physicochemical properties to SLNs and thus achieve enhanced functionalities. Novel SLNs with biopolymeric double layer (DL) coating using two natural biopolymers, i.e. caseinate (NaCas) and pectin, were prepared to encapsulate and deliver curcumin, a lipophilic bioactive compound studied as a model drug/nutrient. The DL coating was chemically cross-linked by creating covalent bonds between NaCas and pectin, using two different cross-linkers, i.e. glutaraldehyde (GA) and 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-Hydroxysuccinimide (EDC/NHS). Prior to cross-linking, the mean particle size, polydispersity index and zeta potential of DL-SLNs were 300-330nm, 0.25-0.30, -45-40mV, respectively. It was found that cross-linking with GA had a more prominent effect on particle size and polydispersity index than EDC/NHS. The cross-linking process significantly improved physicochemical properties of DL-SLNs, resulting in higher encapsulation efficiency and loading capacity, better stability and slower release profile in simulated gastrointestinal conditions. Particularly, an optimal zero-order release kinetic was observed for EDC/NHS crosslinked DL-SLNs. The electron microscopy revealed that both cross-linked DL-SLNs exhibited spherical shape with homogeneous size and smooth surface. Encapsulation of curcumin in SLNs dramatically enhanced its antioxidant activity in aqueous condition. The cross-linking process further helped spray drying of SLNs by forming homogenous powder particles. These results indicated that coating with cross-linked polymers could significantly improve the physicochemical properties of SLNs and expand their potentials as

  14. Structure and genome release of Twort-like Myoviridae phage with a double-layered baseplate

    PubMed Central

    Nováček, Jiří; Šiborová, Marta; Benešík, Martin; Pantůček, Roman; Doškař, Jiří; Plevka, Pavel

    2016-01-01

    Bacteriophages from the family Myoviridae use double-layered contractile tails to infect bacteria. Contraction of the tail sheath enables the tail tube to penetrate through the bacterial cell wall and serve as a channel for the transport of the phage genome into the cytoplasm. However, the mechanisms controlling the tail contraction and genome release of phages with “double-layered” baseplates were unknown. We used cryo-electron microscopy to show that the binding of the Twort-like phage phi812 to the Staphylococcus aureus cell wall requires a 210° rotation of the heterohexameric receptor-binding and tripod protein complexes within its baseplate about an axis perpendicular to the sixfold axis of the tail. This rotation reorients the receptor-binding proteins to point away from the phage head, and also results in disruption of the interaction of the tripod proteins with the tail sheath, hence triggering its contraction. However, the tail sheath contraction of Myoviridae phages is not sufficient to induce genome ejection. We show that the end of the phi812 double-stranded DNA genome is bound to one protein subunit from a connector complex that also forms an interface between the phage head and tail. The tail sheath contraction induces conformational changes of the neck and connector that result in disruption of the DNA binding. The genome penetrates into the neck, but is stopped at a bottleneck before the tail tube. A subsequent structural change of the tail tube induced by its interaction with the S. aureus cell is required for the genome’s release. PMID:27469164

  15. Fast Response, vertically oriented graphene nanosheet electric double layer capacitors synthesized from C(2)H(2).

    PubMed

    Cai, Minzhen; Outlaw, Ronald A; Quinlan, Ronald A; Premathilake, Dilshan; Butler, Sue M; Miller, John R

    2014-06-24

    The growth and electrical characteristics of vertically oriented graphene nanosheets grown by radio frequency plasma-enhanced chemical vapor deposition from C2H2 feedstock on nickel substrates and used as electrodes in symmetric electric double layer capacitors (EDLC) are presented. The nanosheets exhibited 2.7 times faster growth rate and much greater specific capacitance for a given growth time than CH4 synthesized films. Raman spectra showed that the intensity ratio of the D band to G band versus temperature initially decreased to a minimum value of 0.45 at a growth temperature of 750 °C, but increased rapidly with further temperature increase (1.15 at 850 °C). The AC specific capacitance at 120 Hz of these EDLC devices increased in a linear fashion with growth temperature, up to 265 μF/cm(2) (2 μm high film, 850 °C with 10 min growth). These devices exhibited ultrafast frequency response: the frequency response at -45° phase angle reached over 20 kHz. Consistent with the increase in D band to G band ratio, the morphology of the films became less vertical, less crystalline, and disordered at substrate temperatures of 800 °C and above. This deterioration in morphology resulted in an increase in graphene surface area and defect density, which, in turn, contributed to the increased capacitance, as well as a slight decrease in frequency response. The low equivalent series resistance varied from 0.07 to 0.08 Ω and was attributed to the significant carbon incorporation into the Ni substrate.

  16. Martian craters viewed by the Thermal Emission Imaging System instrument: Double-layered ejecta craters

    NASA Astrophysics Data System (ADS)

    Boyce, Joseph M.; Mouginis-Mark, Peter J.

    2006-10-01

    The Thermal Emission Imaging System (THEMIS) visible (VIS) images provide new insight into the nature and development of the unique ejecta deposits of Martian craters. This study focuses on double-layered ejecta (DLE) craters. To date, over 100 DLE craters have been examined using mainly THEMIS VIS data. Our observations suggest that emplacement of DLE crater ejecta occurred in two stages, with the inner ejecta layer emplaced similar to single-layered ejecta (SLE) crater ejecta. This may have involved both ballistic and flow processes. In contrast, the outer ejecta layer of DLE craters appears to have been emplaced through the high-velocity outflow of materials from tornadic winds generated by the advancing ejecta curtain or base surge. Remarkably, DLE craters lack secondary craters, which suggests that the large ejecta blocks that normally produce such craters may have either been entrained and/or crushed by these winds or fragmented as a result of the presence of water in the target materials. These observations suggest that volatiles (either trapped in the subsurface or in the atmosphere) have played a key role in the emplacement of the ejecta of DLE craters and leaves open the question as to what role volatiles play in the emplacement of ejecta of other types of fluidized ejecta craters (i.e., SLE and MLE craters). Because DLE craters are found in many different regions of Mars, often in close proximity to other types of craters, conditions (e.g., atmospheric density) that produce DLE craters must fluctuate or the Martian crust must be unexpectedly heterogeneous (laterally and vertically). While the degree of heterogeneity has yet to be recognized, recent suggestions about possible Martian climate change raises the possibility of impact into target materials that are periodically wet or that a significantly higher atmospheric pressure may be periodically present.

  17. Subsurface volatile content of martian double-layer ejecta (DLE) craters

    NASA Astrophysics Data System (ADS)

    Viola, Donna; McEwen, Alfred S.; Dundas, Colin M.; Byrne, Shane

    2017-03-01

    Excess ice is widespread throughout the martian mid-latitudes, particularly in Arcadia Planitia, where double-layer ejecta (DLE) craters also tend to be abundant. In this region, we observe the presence of thermokarstically-expanded secondary craters that likely form from impacts that destabilize a subsurface layer of excess ice, which subsequently sublimates. The presence of these expanded craters shows that excess ice is still preserved within the adjacent terrain. Here, we focus on a 15-km DLE crater that contains abundant superposed expanded craters in order to study the distribution of subsurface volatiles both at the time when the secondary craters formed and, by extension, remaining today. To do this, we measure the size distribution of the superposed expanded craters and use topographic data to calculate crater volumes as a proxy for the volumes of ice lost to sublimation during the expansion process. The inner ejecta layer contains craters that appear to have undergone more expansion, suggesting that excess ice was most abundant in that region. However, both of the ejecta layers had more expanded craters than the surrounding terrain. We extrapolate that the total volume of ice remaining within the entire ejecta deposit is as much as 74 km3 or more. The variation in ice content between the ejecta layers could be the result of (1) volatile preservation from the formation of the DLE crater, (2) post-impact deposition in the form of ice lenses; or (3) preferential accumulation or preservation of subsequent snowfall. We have ruled out (2) as the primary mode for ice deposition in this location based on inconsistencies with our observations, though it may operate in concert with other processes. Although none of the existing DLE formation hypotheses are completely consistent with our observations, which may merit a new or modified mechanism, we can conclude that DLE craters contain a significant quantity of excess ice today.

  18. Low Temperature Regolith Bricks for In-Situ Structural Material

    NASA Technical Reports Server (NTRS)

    Grossman, Kevin; Sakthivel, Tamil S.; Mantovani, James; Seal, Sudipta

    2016-01-01

    Current technology for producing in-situ structural materials on future missions to Mars or the moon relies heavily on energy-intensive sintering processes to produce solid bricks from regolith. This process requires heating the material up to temperatures in excess of 1000 C and results in solid regolith pieces with compressive strengths in the range of 14000 to 28000 psi, but are heavily dependent on the porosity of the final material and are brittle. This method is currently preferred over a low temperature cementation process to prevent consumption of precious water and other non-renewable materials. A high strength structural material with low energy requirements is still needed for future colonization of other planets. To fulfill these requirements, a nano-functionalization process has been developed to produce structural bricks from regolith simulant and shows promising mechanical strength results. Functionalization of granular silicate particles into alkoxides using a simple low temperature chemical process produces a high surface area zeolite particles that are held together via inter-particle oxygen bonding. Addition of water in the resulting zeolite particles produces a sol-gel reaction called "inorganic polymerization" which gives a strong solid material after a curing process at 60 C. The aqueous solution by-product of the reaction is currently being investigated for its reusability; an essential component of any ISRU technology. For this study, two batches of regolith bricks are synthesized from JSC-1A; the first batch from fresh solvents and chemicals, the second batch made from the water solution by-product of the first batch. This is done to determine the feasibility of recycling necessary components of the synthesis process, mainly water. Characterization including BET surface area, SEM, and EDS has been done on the regolith bricks as well as the constituent particles,. The specific surface area of 17.53 sq m/g (average) of the granular regolith

  19. Characterization and organic electric-double-layer-capacitor application of KOH activated coal-tar-pitch-based carbons: Effect of carbonization temperature

    NASA Astrophysics Data System (ADS)

    Choi, Poo Reum; Lee, Eunji; Kwon, Soon Hyung; Jung, Ji Chul; Kim, Myung-Soo

    2015-12-01

    The present study reports the influence of pre-carbonization on the properties of KOH-activated coal tar pitch (CTP). The change of crystallinity and pore structure of pre-carbonized CTPs as well as their activated carbons (ACs) as function of pre-carbonization temperature are investigated. The crystallinity of pre-carbonized CTPs increases with increasing the carbonization temperature up to 600 °C, but a disorder occurs during the carbonization around 700 °C and an order happens gradually with increasing the carbonization temperatures in range of 800-1000 °C. The CTPs pre-carbonized at high temperatures are more difficult to be activated with KOH than those pre-carbonized at low temperatures due to the increase of micro-crystalline size and the decrease of surface functional groups. The micro-pores and meso-pores are well developed at around 1.0 nm and 2.4 nm, respectively, as the ACs are pre-carbonized at temperatures of 500-600 °C, exhibiting high specific capacitances as electrode materials for electric double layer capacitor (EDLC). Although the specific surface area (SSA) and pore volume of ACs pre-carbonized at temperatures of 900-1000 °C are extraordinary low (non-porous) as compared to those of AC pre-carbonized at 600 °C, their specific capacitances are comparable to each other. The large specific capacitances with low SSA ACs can be attributed to the structural change resulting from the electrochemical activation during the 1st charge above 2.0 V.

  20. Optical properties of self-assembled TiO2-SiO2 double-layered photonic crystals.

    PubMed

    Oh, Yong Taeg; Koo, Bo Ra; Shin, Dong Chan

    2013-01-01

    The optical properties of self-assembled TiO2/SiO2 double-layered photonic crystals were examined using SiO2 and TiO2 nanopowders. The SiO2 and TiO2 nanopowders were fabricated using the well-known Stöber process, and the double-layered structure was self-assembled by an evaporation method. Self-assembled TiO2 thin film was coated at a 1.2 mm thickness by the evaporation process, and 3 atomic layers of the SiO2 layer was coated onto the TiO2 thin film. The relative reflectance peak intensity of the photonic bandgap in the specimen was 13% before thermal treatment. The peak value was increased by sequential heat-treatments and reached the highest value of 21% at 400 degrees C.

  1. High-Performance Humidity Sensors Based on Double-Layer ZnO-TiO2 Nanofibers via Electrospinning

    NASA Astrophysics Data System (ADS)

    Yue, Xue-Jun; Hong, Tian-Sheng; Xu, Xing; Li, Zhen

    2011-09-01

    ZnO and TiO2 nanofibers are synthesized via electrospinning methods and characterized by x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Humidity sensors with double-layer sensing films are fabricated by spinning the ZnO and TiO2 nanofibers on ceramic substrates sequentially. Compared with sensors loading only one type of nanofiber, the double-layer sensors exhibit much better sensing properties. The corresponding impedance changes more than four orders of magnitude within the whole humidity range from 11% to 95% relative humidity, and the response and recovery times are about 11 and 7s, respectively. Maximum hysteresis is around 1.5% RH, and excellent stability is also observed after 180 days. The humidity sensing mechanism is discussed in terms of the sensor structure. The experimental results provide a possible route for the design and fabrication of high performance humidity sensors based on one-dimensional nanomaterials.

  2. Density functional theory calculations for the hydrogen evolution reaction in an electrochemical double layer on the Pt(111) electrode.

    PubMed

    Skúlason, Egill; Karlberg, Gustav S; Rossmeisl, Jan; Bligaard, Thomas; Greeley, Jeff; Jónsson, Hannes; Nørskov, Jens K

    2007-07-07

    We present results of density functional theory calculations on a Pt(111) slab with a bilayer of water, solvated protons in the water layer, and excess electrons in the metal surface. In this way we model the electrochemical double layer at a platinum electrode. By varying the number of protons/electrons in the double layer we investigate the system as a function of the electrode potential. We study the elementary processes involved in the hydrogen evolution reaction, 2(H(+) + e(-)) --> H(2), and determine the activation energy and predominant reaction mechanism as a function of electrode potential. We confirm by explicit calculations the notion that the variation of the activation barrier with potential can be viewed as a manifestation of the Brønsted-Evans-Polanyi-type relationship between activation energy and reaction energy found throughout surface chemistry.

  3. Fast valve based on double-layer eddy-current repulsion for disruption mitigation in Experimental Advanced Superconducting Tokamak.

    PubMed

    Zhuang, H D; Zhang, X D

    2015-05-01

    A fast valve based on the double-layer eddy-current repulsion mechanism has been developed on Experimental Advanced Superconducting Tokamak (EAST). In addition to a double-layer eddy-current coil, a preload system was added to improve the security of the valve, whereby the valve opens more quickly and the open-valve time becomes shorter, making it much safer than before. In this contribution, testing platforms, open-valve characteristics, and throughput of the fast valve are discussed. Tests revealed that by choosing appropriate parameters the valve opened within 0.15 ms, and open-valve times were no longer than 2 ms. By adjusting working parameter values, the maximum number of particles injected during this open-valve time was estimated at 7 × 10(22). The fast valve will become a useful tool to further explore disruption mitigation experiments on EAST in 2015.

  4. Electrochemical Electron Transfer and Proton-Coupled Electron Transfer: Effects of Double Layer and Ionic Environment on Solvent Reorganization Energies

    SciTech Connect

    Ghosh, Soumya; Soudackov, Alexander V.; Hammes-Schiffer, Sharon

    2016-06-14

    Electron transfer and proton coupled electron transfer (PCET) reactions at electrochemical interfaces play an essential role in a broad range of energy conversion processes. The reorganization energy, which is a measure of the free energy change associated with solute and solvent rearrangements, is a key quantity for calculating rate constants for these reactions. We present a computational method for including the effects of the double layer and ionic environment of the diffuse layer in calculations of electrochemical solvent reorganization energies. This approach incorporates an accurate electronic charge distribution of the solute within a molecular-shaped cavity in conjunction with a dielectric continuum treatment of the solvent, ions, and electrode using the integral equations formalism polarizable continuum model. The molecule-solvent boundary is treated explicitly, but the effects of the electrode-double layer and double layer-diffuse layer boundaries, as well as the effects of the ionic strength of the solvent, are included through an external Green’s function. The calculated total reorganization energies agree well with experimentally measured values for a series of electrochemical systems, and the effects of including both the double layer and ionic environment are found to be very small. This general approach was also extended to electrochemical PCET and produced total reorganization energies in close agreement with experimental values for two experimentally studied PCET systems. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center, funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

  5. Novel computational approach for studying ph effects, excluded volume and ion-ion correlations in electrical double layers around polyelectrolytes and nanoparticles

    NASA Astrophysics Data System (ADS)

    Ovanesyan, Zaven

    Highly charged cylindrical and spherical objects (macroions) are probably the simplest structures for modeling nucleic acids, proteins and nanoparticles. Their ubiquitous presence within biophysical systems ensures that Coulomb forces are among the most important interactions that regulate the behavior of these systems. In these systems, ions position themselves in a strongly correlated manner near the surface of a macroion and form electrical double layers (EDLs). These EDLs play an important role in many biophysical and biochemical processes. For instance, the macroion's net charge can change due to the binding of many multivalent ions to its surface. Thus, proper description of EDLs near the surface of a macroion may reveal a counter-intuitive charge inversion behavior, which can generate attraction between like-charged objects. This is relevant for the variety of fields such as self-assembly of DNA and RNA folding, as well as for protein aggregation and neurodegenerative diseases. Certainly, the key factors that contribute to these phenomena cannot be properly understood without an accurate solvation model. With recent advancements in computer technologies, the possibility to use computational tools for fundamental understanding of the role of EDLs around biomolecules and nanoparticles on their physical and chemical properties is becoming more feasible. Establishing the impact of the excluded volume and ion-ion correlations, ionic strength and pH of the electrolyte on the EDL around biomolecules and nanoparticles, and how changes in these properties consequently affect the Zeta potential and surface charge density are still not well understood. Thus, modeling and understanding the role of these properties on EDLs will provide more insights on the stability, adsorption, binding and function of biomolecules and nanoparticles. Existing mean-field theories such as Poisson Boltzmann (PB) often neglect the ion-ion correlations, solvent and ion excluded volume effects

  6. Organic double layer element driven by triboelectric nanogenerator: Study of carrier behavior by non-contact optical method

    NASA Astrophysics Data System (ADS)

    Chen, Xiangyu; Taguchi, Dai; Manaka, Takaaki; Iwamoto, Mitsumasa

    2016-02-01

    By using optical electric-field-induced second-harmonic generation (EFISHG) technique, we studied carrier behavior caused by contact electrification (CE) in an organic double-layer element. This double-layer sample was half suspended in the open air, where one electrode (anode or cathode) was connected with a Cu foil for electrification while the other electrode was floated. Results showed two distinct carrier behaviors, depending on the (anode or cathode) connections to the Cu foil, and these carrier behaviors were analyzed based on the Maxwell-Wagner model. The double-layer sample works as a simple solar cell device. The photovoltaic effect and CE process have been proved to be two paralleled effects without strong interaction with each other, while photoconductivity changing in the sample can enhance the relaxation of CE induced charges. By probing the carrier behavior in this half-suspended device, the EFISHG technique has been demonstrated to be an effective non-contact method for clarifying the CE effect on related energy harvesting devices and electronics devices. Meanwhile, the related physical analysis in this letter is also useful for elucidating the fundamental characteristic of hybrid energy system based on solar cell and triboelectric nanogenerator.

  7. Anode-electrolyte double-layer of Li-ion batteries: Structure and Li-ion intercalation

    NASA Astrophysics Data System (ADS)

    Wipf, David O.; Abou Hamad, Ibrahim; Rikvold, Per Arne; Novotny, Mark A.

    2011-03-01

    The electrochemical double-layer structure plays an important role in Li-ion intercalation during charging of Li-ion batteries with a graphite anode. In our recent Molecular Dynamics studies of a proposed accelerated charging method [I. Abou Hamad~et al., Phys. Chem. Chem. Phys. 12, 2740-2743 (2010)], we notice that ethylene carbonate and propylene carbonate molecules of the electrolyte assemble themselves in a preferred orientation at the electrode-electrolyte interface. On the other hand, they are randomly oriented in the bulk electrolyte. We show that the structure of the double layer is affected by the intercalating Li-ion: while the dipole moments of double-layer molecules far from the intercalating Li-ion point toward the graphite sheets of the anode, they point away from the intercalation site close to the intercalating Li-ion. This observation should contribute to a better understanding of the intercalation process. This work was supported in part by NSF Grant No. DMR-0802288.

  8. Microwave absorption properties of double-layer composites using CoZn/NiZn/MnZn-ferrite and titanium dioxide

    NASA Astrophysics Data System (ADS)

    Das, Sukanta; Nayak, G. C.; Sahu, S. K.; Routray, P. C.; Roy, A. K.; Baskey, H.

    2015-03-01

    Zinc substituted ferrite powders Me0.5Zn0.5Fe2O4 (Me=Co, Mn and Ni) were prepared by the sol-gel auto-combustion method. The present study highlights development of Single layer and double layer composite microwave absorbing materials using Ferrites, Titanium dioxide and Epoxy matrix. Moreover microwave absorption property, i.e. reflection loss evaluated at X-band frequency. XRD analysis of the filler particles were carried out to evaluate crystal structure, average crystallite diameter. Morphology of the filler particles were studied with FESEM. Hysteresis behavior of the ferrites samples were studied with Vibrating Sample Magnetometer. The most important parameter governing the absorption properties of microwave absorbers i.e. permittivity and permeability studied in a vector network analyzer. Measured reflection loss value of single-layer NiZn-ferrite based microwave absorber reaches -11.2 dB at 12.05 GHz. Whereas, reflection loss value of double-layer CoZn-ferrite/ TiO2 based microwave absorber reaches -24.3 dB at 12.02 GHz. The result shows that microwave absorption property and bandwidth of absorption of double-layer microwave absorber was found to improve comparison to single layer.

  9. Interplay between Depletion and Double-Layer Forces Acting between Charged Particles in Solutions of Like-Charged Polyelectrolytes

    NASA Astrophysics Data System (ADS)

    Moazzami-Gudarzi, Mohsen; Kremer, Tomislav; Valmacco, Valentina; Maroni, Plinio; Borkovec, Michal; Trefalt, Gregor

    2016-08-01

    Direct force measurements between negatively charged silica particles in the presence of a like-charged strong polyelectrolyte were carried out with an atomic force microscope. The force profiles can be quantitatively interpreted as a superposition of depletion and double-layer forces. The depletion forces are modeled with a damped oscillatory profile, while the double-layer forces with the mean-field Poisson-Boltzmann theory for a strongly asymmetric electrolyte, whereby an effective valence must be assigned to the polyelectrolyte. This effective valence is substantially smaller than the bare valence due to ion condensation effects. The unusual aspect of the electrical double layer in these systems is the exclusion of the like-charged polyelectrolyte from the vicinity of the surface, leading to a strongly nonexponential diffuse ionic layer that is dominated by counterions and has a well-defined thickness. As the oscillatory depletion force sets in right after this layer, this condition can be used to predict the phase of the oscillatory depletion force.

  10. The Development of the Low Temperature Microgravity Physics Facility

    NASA Technical Reports Server (NTRS)

    Chui, T.; Holmes, W.; Lai, A.; Croonquist, A.; Eraker, J.; Abbott, R.; Mills, G.; Mohl, J.; Craig, J.; Balachandra, B.; Gannon, J.

    2000-01-01

    We describe the design and development of the Low Temperature Microgravity Physics Facility, which is intended to provide long duration (4.5 months) low temperature (1.4K) and microgravity conditions for scientists to perform breakthrough investigations on board the International Space Station.

  11. Low temperature barrier wellbores formed using water flushing

    DOEpatents

    McKinzie, II; John, Billy [Houston, TX; Keltner, Thomas Joseph [Spring, TX

    2009-03-10

    A method of forming an opening for a low temperature well is described. The method includes drilling an opening in a formation. Water is introduced into the opening to displace drilling fluid or indigenous gas in the formation adjacent to a portion of the opening. Water is produced from the opening. A low temperature fluid is applied to the opening.

  12. Oxyhydrogen burner for low-temperature flame fusion

    NASA Astrophysics Data System (ADS)

    Ueltzen, M.; Brüggenkamp, T.; Franke, M.; Altenburg, H.

    1993-04-01

    An oxyhydrogen burner as described in this article enables the growth of crystals by Verneuil's technique at temperatures of about 1000 °C. The powder fed to the crystal passes along a low-temperature pathway through the flame, so that evaporation of volatile components is prevented. Low-temperature flame fusion of superconducting Y-Ba-cuprate is reported.

  13. Low temperature magnetic force microscopy on ferromagnetic and superconducting oxides

    NASA Astrophysics Data System (ADS)

    Sirohi, Anshu; Sheet, Goutam

    2016-05-01

    We report the observation of complex ferromagnetic domain structures on thin films of SrRuO3 and superconducting vortices in high temperature superconductors through low temperature magnetic force microscopy. Here we summarize the experimental details and results of magnetic imaging at low temperatures and high magnetic fields. We discuss these data in the light of existing theoretical concepts.

  14. 42 CFR 84.98 - Tests during low temperature operation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Tests during low temperature operation. 84.98...-Contained Breathing Apparatus § 84.98 Tests during low temperature operation. (a) The applicant shall specify the minimum temperature for safe operation and two persons will perform the tests described...

  15. 42 CFR 84.98 - Tests during low temperature operation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Tests during low temperature operation. 84.98...-Contained Breathing Apparatus § 84.98 Tests during low temperature operation. (a) The applicant shall specify the minimum temperature for safe operation and two persons will perform the tests described...

  16. 42 CFR 84.98 - Tests during low temperature operation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Tests during low temperature operation. 84.98...-Contained Breathing Apparatus § 84.98 Tests during low temperature operation. (a) The applicant shall specify the minimum temperature for safe operation and two persons will perform the tests described...

  17. 42 CFR 84.98 - Tests during low temperature operation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Tests during low temperature operation. 84.98...-Contained Breathing Apparatus § 84.98 Tests during low temperature operation. (a) The applicant shall specify the minimum temperature for safe operation and two persons will perform the tests described...

  18. 42 CFR 84.98 - Tests during low temperature operation.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Tests during low temperature operation. 84.98...-Contained Breathing Apparatus § 84.98 Tests during low temperature operation. (a) The applicant shall specify the minimum temperature for safe operation and two persons will perform the tests described...

  19. Double Layering and Bilateral Asymmetry of a Thermochemical Plume in the Upper Mantle beneath Hawaii

    NASA Astrophysics Data System (ADS)

    Ito, G.; Ballmer, M. D.; Wolfe, C. J.; Solomon, S. C.

    2012-12-01

    Classical plume theory describes purely thermal upwellings that rise through the entire mantle, pond beneath the lithospheric plate in a thin "pancake," and generate hotspot volcanism. High-resolution seismic velocity images obtained from the Plume-Lithosphere Undersea Melt Experiment (PLUME) support the concept of a deep-rooted mantle plume beneath the Hawaiian hotspot. However, in detail these images challenge traditional concepts inasmuch as they indicate a broad low-velocity body in the upper mantle that is much thicker and more asymmetric than a thermal pancake predicted from purely thermal plume models. Geochemical observations also argue against a purely thermal (i.e., isochemical) mantle source for Hawaiian lavas and instead indicate a heterogeneous plume involving mafic lithologies such as eclogite. To explore the dynamical and melting behavior of hot plumes that also contain eclogite, we perform three-dimensional numerical simulations of thermochemical convection. The models simulate eclogite with an excess density relative to ambient-mantle peridotite that peaks at depths of 410-300 km due to solid phase changes and lessens at depths of 250-190 km where eclogite is removed by melting. For a plume core with an eclogite content >12%, a moderately buoyant plume stem rises into the upper mantle but pools as a much wider body at depths of 450-300 km (the "deep eclogite pool", or DEP). Out of the top of the DEP rises a shallow plume that feeds hotspot volcanism and supplies material into a thin sublithospheric pancake that supports the hotspot swell. Seismic resolution tests indicate that the double layering of hot plume material (DEP and shallow pancake) can account for the thick low-velocity body as imaged by PLUME. We also find that upwelling fingers of non-eclogitic outskirt material can support magmatism comparable in volume and geographic distribution to Hawaiian rejuvenated stage and arch volcanism. In some models, thermochemical plumes with radial and

  20. Digital Elevation Models Aid the Analysis of Double Layered Ejecta (DLE) Impact Craters on Mars

    NASA Astrophysics Data System (ADS)

    Mouginis-Mark, P. J.; Boyce, J. M.; Garbeil, H.

    2014-12-01

    Considerable debate has recently taken place concerning the origin of the inner and outer ejecta layers of double layered ejecta (DLE) craters on Mars. For craters in the diameter range ~10 to ~25 km, the inner ejecta layer of DLE craters displays characteristic grooves extending from the rim crest, and has led investigators to propose three hypotheses for their formation: (1) deposition of the primary ejecta and subsequent surface scouring by either atmospheric vortices or a base surge; (2) emplacement through a landslide of the near-rim crest ejecta; and (3) instabilities (similar to Gortler vortices) generated by high flow-rate, and high granular temperatures. Critical to resolving between these models is the topographic expression of both the ejecta layer and the groove geometry. To address this problem, we have made several digital elevation models (DEMs) from CTX and HiRISE stereo pairs using the Ames Stereo Pipeline at scales of 24 m/pixel and 1 m/pixel, respectively. These DEMs allow several key observations to be made that bear directly upon the origin of the grooves associated with DLE craters: (1) Grooves formed on the sloping ejecta layer surfaces right up to the preserved crater rim; (2) There is clear evidence that grooves traverse the topographic boundary between the inner and outer ejecta layers; and (3) There are at least two different sets of radial grooves, with smaller grooves imprinted upon the larger grooves. There are "deep-wide" grooves that have a width of ~200 m and a depth of ~10 m, and there are "shallow-narrow" grooves with a width of <50 m and depth <5 m. These two scales of grooves are not consistent with their formation analogous to a landslide. Two different sets of grooves would imply that, simultaneously, two different depths to the flow would have to exist if the grooves were formed by shear within the flow, something that is not physically possible. All three observations can only be consistent with a model of groove formation

  1. A possible formation process of outer lobes of Double Layered Ejecta craters on Mars

    NASA Astrophysics Data System (ADS)

    Suzuki, A.; Baratoux, D.; Kurita, K.

    2008-12-01

    Martian impact ejecta are famous for their morphologies suggesting ejecta would be formed by radial ground- hugging flows in the late stage of the impact. The atmosphere [Schultz, 1992] and/or the subsurface volatiles [Carr et al., 1977] have been suggested as causes of fluidization. Examining the process to generate and emplace the radial flow would allow us to understand the nature of the entrained fluid. Double Layered Ejecta (DLE), one of the major subclasses of martian ejecta, have many unique features. Most enigmatic is the presence of two distinct layers of ejecta: a thick inner lobe and a thin outer lobe. The striking differences between the two lobes suggest that two different processes occur independently during ejecta emplacement, a case implausible by a single ballistic trajectory. In this study, based on the hypothesis that an impact- induced vortex ring modifies surface materials in the late stage of the impact to produce the outer lobe, the volumes of displaced particles by the vortex ring were measured in laboratory experiments to compare the volumes of the outer lobes. We utilized the experimental situation of a vortex ring impacting on a particle layer. Two dimensionless numbers based on particle size (Shields' and Reynolds number) in lab fall within the same ranges as those on Mars [Suzuki et al., 2007], it is thus possible to compare the relationships between volumes and Γ, a parameter expressing the strength of a vortex ring. We fit the dependence of Vdisplaced on Gamma using a power law Vdisplaced = a Γb and we found b = 1.25 ± 0.17. The volumes of the outer lobes were measured, selecting 7 fresh craters larger than 5km in diameter in the survey area (0N-60N, 90E-150E). In the case of impact cratering, the vortex strength Γ can be scaled with the crater diameter [Barnouin-Jha and Schultz, 1998] as Γ ∝ D⅔. Using also a power law Vouter = c Γd, we obtained d = 1.42 ± 0.24 for the volume of outer lobes of DLE. As the power indices of

  2. Modeling sorption of divalent metal cations on hydrous manganese oxide using the diffuse double layer model

    USGS Publications Warehouse

    Tonkin, J.W.; Balistrieri, L.S.; Murray, J.W.

    2004-01-01

    Manganese oxides are important scavengers of trace metals and other contaminants in the environment. The inclusion of Mn oxides in predictive models, however, has been difficult due to the lack of a comprehensive set of sorption reactions consistent with a given surface complexation model (SCM), and the discrepancies between published sorption data and predictions using the available models. The authors have compiled a set of surface complexation reactions for synthetic hydrous Mn oxide (HMO) using a two surface site model and the diffuse double layer SCM which complements databases developed for hydrous Fe (III) oxide, goethite and crystalline Al oxide. This compilation encompasses a range of data observed in the literature for the complex HMO surface and provides an error envelope for predictions not well defined by fitting parameters for single or limited data sets. Data describing surface characteristics and cation sorption were compiled from the literature for the synthetic HMO phases birnessite, vernadite and ??-MnO2. A specific surface area of 746 m2g-1 and a surface site density of 2.1 mmol g-1 were determined from crystallographic data and considered fixed parameters in the model. Potentiometric titration data sets were adjusted to a pH1EP value of 2.2. Two site types (???XOH and ???YOH) were used. The fraction of total sites attributed to ???XOH (??) and pKa2 were optimized for each of 7 published potentiometric titration data sets using the computer program FITEQL3.2. pKa2 values of 2.35??0.077 (???XOH) and 6.06??0.040 (???YOH) were determined at the 95% confidence level. The calculated average ?? value was 0.64, with high and low values ranging from 1.0 to 0.24, respectively. pKa2 and ?? values and published cation sorption data were used subsequently to determine equilibrium surface complexation constants for Ba2+, Ca2+, Cd 2+, Co2+, Cu2+, Mg2+, Mn 2+, Ni2+, Pb2+, Sr2+ and Zn 2+. In addition, average model parameters were used to predict additional

  3. Overcharging and charge reversal in the electrical double layer around the point of zero charge.

    PubMed

    Guerrero-García, G Iván; González-Tovar, Enrique; Chávez-Páez, Martín; Lozada-Cassou, Marcelo

    2010-02-07

    The ionic adsorption around a weakly charged spherical colloid, immersed in size-asymmetric 1:1 and 2:2 salts, is studied. We use the primitive model (PM) of an electrolyte to perform Monte Carlo simulations as well as theoretical calculations by means of the hypernetted chain/mean spherical approximation (HNC/MSA) and the unequal-radius modified Gouy-Chapman (URMGC) integral equations. Structural quantities such as the radial distribution functions, the integrated charge, and the mean electrostatic potential are reported. Our Monte Carlo "experiments" evidence that near the point of zero charge, the smallest ionic species is preferentially adsorbed onto the macroparticle, independently of the sign of the charge carried by this tiniest electrolytic component, giving rise to the appearance of the phenomena of charge reversal (CR) and overcharging (OC). Accordingly, colloidal CR, due to an excessive attachment of counterions, is observed when the macroion is slightly charged and the coions are larger than the counterions. In the opposite situation, i.e., if the counterions are larger than the coions, the central macroion acquires additional like-charge (coions) and hence becomes "overcharged," a feature theoretically predicted in the past [F. Jiménez-Angeles and M. Lozada-Cassou, J. Phys. Chem. B 108, 7286 (2004)]. In other words, here we present the first simulation data on OC in the PM electrical double layer, showing that close to the point of zero charge, this novel effect surges as a consequence of the ionic size asymmetry. We also find that the HNC/MSA theory captures well the CR and OC phenomena exhibited by the computer experiments, especially as the macroion's charge increases. On the contrary, even if URMGC also displays CR and OC, its predictions do not compare favorably with the Monte Carlo data, evidencing that the inclusion of hard-core correlations in Monte Carlo and HNC/MSA enhances and extends those effects. We explain our findings in terms of the

  4. Low-temperature softening in body-centered cubic alloys

    NASA Technical Reports Server (NTRS)

    Pink, E.; Arsenault, R. J.

    1979-01-01

    In the low-temperature range, bcc alloys exhibit a lower stress-temperature dependence than the pure base metals. This effect often leads to a phenomenon that is called 'alloy softening': at low temperatures, the yield stress of an alloy may be lower than that of the base metal. Various theories are reviewed; the most promising are based either on extrinsic or intrinsic models of low-temperature deformation. Some other aspects of alloy softening are discussed, among them the effects on the ductile-brittle transition temperature.

  5. Low temperature safety of lithium-thionyl chloride cells

    NASA Technical Reports Server (NTRS)

    Subbarao, S.; Deligiannis, F.; Shen, D. H.; Dawson, S.; Halpert, G.

    1988-01-01

    The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

  6. Low temperature safety of lithium-thionyl chloride cells

    NASA Astrophysics Data System (ADS)

    Subbarao, S.; Deligiannis, F.; Shen, D. H.; Dawson, S.; Halpert, G.

    The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

  7. Total Dose Effects on Bipolar Integrated Circuits at Low Temperature

    NASA Technical Reports Server (NTRS)

    Johnston, A. H.; Swimm, R. T.; Thorbourn, D. O.

    2012-01-01

    Total dose damage in bipolar integrated circuits is investigated at low temperature, along with the temperature dependence of the electrical parameters of internal transistors. Bandgap narrowing causes the gain of npn transistors to decrease far more at low temperature compared to pnp transistors, due to the large difference in emitter doping concentration. When irradiations are done at temperatures of -140 deg C, no damage occurs until devices are warmed to temperatures above -50 deg C. After warm-up, subsequent cooling shows that damage is then present at low temperature. This can be explained by the very strong temperature dependence of dispersive transport in the continuous-time-random-walk model for hole transport. For linear integrated circuits, low temperature operation is affected by the strong temperature dependence of npn transistors along with the higher sensitivity of lateral and substrate pnp transistors to radiation damage.

  8. Low temperature CVD growth of ultrathin carbon films

    NASA Astrophysics Data System (ADS)

    Yang, Chao; Wu, Peng; Gan, Wei; Habib, Muhammad; Xu, Weiyu; Fang, Qi; Song, Li

    2016-05-01

    We demonstrate the low temperature, large area growth of ultrathin carbon films by chemical vapor deposition under atmospheric pressure on various substrates. In particularly, uniform and continuous carbon films with the thickness of 2-5 nm were successfully grown at a temperature as low as 500 oC on copper foils, as well as glass substrates coated with a 100 nm thick copper layer. The characterizations revealed that the low-temperature-grown carbon films consist on few short, curved graphene layers and thin amorphous carbon films. Particularly, the low-temperature grown samples exhibited over 90% transmittance at a wavelength range of 400-750 nm and comparable sheet resistance in contrast with the 1000oC-grown one. This low-temperature growth method may offer a facile way to directly prepare visible ultrathin carbon films on various substrate surfaces that are compatible with temperatures (500-600oC) used in several device processing technologies.

  9. 2014 Low-Temperature and Coproduced Geothermal Resources Fact Sheet

    SciTech Connect

    Tim Reinhardt, Program Manager

    2014-09-01

    As a growing sector of geothermal energy development, the Low-Temperature Program supports innovative technologies that enable electricity production and cascaded uses from geothermal resources below 300° Fahrenheit.

  10. Plasma heating power dissipation in low temperature hydrogen plasmas

    SciTech Connect

    Komppula, J. Tarvainen, O.

    2015-10-15

    A theoretical framework for power dissipation in low temperature plasmas in corona equilibrium is developed. The framework is based on fundamental conservation laws and reaction cross sections and is only weakly sensitive to plasma parameters, e.g., electron temperature and density. The theory is applied to low temperature atomic and molecular hydrogen laboratory plasmas for which the plasma heating power dissipation to photon emission, ionization, and chemical potential is calculated. The calculated photon emission is compared to recent experimental results.

  11. US Low-Temperature EGS Resource Potential Estimate

    SciTech Connect

    Katherine Young

    2016-06-30

    Shapefile of shallow, low-temperature EGS resources for the United States, and accompanying paper (submitted to GRC 2016) describing the methodology and analysis. These data are part of a very rough estimate created for use in the U.S. Department of Energy Geothermal Technology Office's Vision Study. They are not a robust estimate of low-temperature EGS resources in the U.S, and should be used accordingly.

  12. Preliminary low temperature tests of a digital signal processor

    NASA Technical Reports Server (NTRS)

    Zebulum, Ricardo S.; Ramesham, Rajeshuni; Stoica, Adrian; Keymeulen, Didier; Daud, Taher; Sekanina, Lukas

    2005-01-01

    This paper describes an initial experiment performed to assess the electrical behavior of the Innovative Integration board containing a Digital Signal Processor (DSP) with its JTAG (Blackhawk) connector at low temperatures. The objective of the experiment is to determine the lowest temperature at which the DSP can operate. The DSP was tested at various low-temperatures and a Genetic Algorithm was used as the DSP test program.

  13. Measured Performance of a Low Temperature Air Source Heat Pump

    SciTech Connect

    R.K. Johnson

    2013-09-01

    A 4-ton Low Temperature Heat Pump (LTHP) manufactured by Hallowell International was installed in a residence near New Haven, Connecticut and monitored over two winters of operation. After attending to some significant service issues, the heat pump operated as designed. This report should be considered a review of the dual compressor “boosted heat pump” technology. The Low Temperature Heat Pump system operates with four increasing levels of capacity (heat output) as the outdoor temperature drops.

  14. Apparatus for high-pressure and low-temperature experiments

    NASA Technical Reports Server (NTRS)

    Golopentia, D. A.; Ruoff, A. L.

    1981-01-01

    A new type of apparatus for high-pressure experiments at low temperature (1.5 K) is presented. It uses a flat diamond anvil with a spherical indentor. It utilizes a load ring placed under the sample, so that the load (and hence pressure) can be measured in situ at low temperature. The apparatus was successfully used to investigate the high-conductivity state of sulphur. It can be used to investigate other thin film samples.

  15. Low Temperature Degradation of Y-TZP Materials

    DTIC Science & Technology

    1990-01-01

    ZIRCONIA DATA AFTER LOW TEMPERATURE EXPOSURE ............. 18 INTRODUCTION Yttria- tetragonal zirconia polycrystal (Y- TZP ) materials are candidates for...radiation over an angular range of 250 to 400 20. The surface-volume fraction of monoclinic and tetragonal - plus- cubic zirconia was calculated using the...NWoq (c~mw a mw~wik Wmawt &% end &uq by block ,umpbw) Ceramics Low temperature degradation Y- TZP materials Microstructure Yttria- zirconia compounds

  16. Double layer electric fields aiding the production of energetic flat-top distributions and superthermal electrons within magnetic reconnection exhausts

    NASA Astrophysics Data System (ADS)

    Egedal, J.; Daughton, W.; Le, A.; Borg, A. L.

    2015-10-01

    Using a kinetic simulation of magnetic reconnection, it was recently shown that magnetic-field-aligned electric fields (E∥) can be present over large spatial scales in reconnection exhausts. The largest values of E∥ are observed within double layers. The existence of double layers in the Earth's magnetosphere is well documented. In our simulation, their formation is triggered by large parallel streaming of electrons into the reconnection region. These parallel electron fluxes are required for maintaining quasi-neutrality of the reconnection region and increase with decreasing values of the normalized electron pressure upstream of the reconnection region, βe∞=2 μ0ne ∞Te ∞/B∞2 . A threshold (βe∞ < 0.02) is derived for strong double layers to develop. We also document how the electron confinement, provided in part by the structure in E∥, allows sustained energization by perpendicular electric fields (E⊥). The energization is a consequence of the confined electrons' chaotic orbital motion that includes drifts aligned with the reconnection electric field. The level of energization is proportional to the initial particle energy and therefore is enhanced by the initial energy boost of the acceleration potential, e Φ∥=e ∫x∞∥ d l , acquired by electrons entering the region. The mechanism is effective in an extended region of the reconnection exhaust allowing for the generation of superthermal electrons in reconnection scenarios, including those with only a single x-line. An expression for the phase-space distribution of the superthermal electrons is derived, providing an accurate match to the kinetic simulation results. The numerical and analytical results agree with detailed spacecraft observations recorded during reconnection events in the Earth's magnetotail.

  17. Impact of single- vs double-layer closure on adverse outcomes and uterine scar defect: a systematic review and metaanalysis.

    PubMed

    Roberge, Stéphanie; Demers, Suzanne; Berghella, Vincenzo; Chaillet, Nils; Moore, Lynne; Bujold, Emmanuel

    2014-11-01

    A systematic review and metaanalysis were performed through electronic database searches to estimate the effect of uterine closure at cesarean on the risk of adverse maternal outcome and on uterine scar evaluated by ultrasound. Randomized controlled trials, which compared single vs double layers and locking vs unlocking sutures for uterine closure of low transverse cesarean, were included. Outcomes were short-term complications (endometritis, wound infection, maternal infectious morbidity, blood transfusion, duration of surgical procedure, length of hospital stay, mean blood loss), uterine rupture or dehiscence at next pregnancy, and uterine scar evaluation by ultrasound. Twenty of 1278 citations were included in the analysis. We found that all types of closure were comparable for short-term maternal outcomes, except for single-layer closure, which had shorter operative time (-6.1 minutes; 95% confidence interval [CI], -8.7 to -3.4; P < .001) than double-layer closure. Single layer (-2.6 mm; 95% CI, -3.1 to -2.1; P < .001) and locked first layer (mean difference, -2.5 mm; 95% CI, -3.2 to -1.8; P < .001) were associated with lower residual myometrial thickness. Two studies reported no significant difference between single- vs double-layer closure for uterine dehiscence (relative risk, 1.86; 95% CI, 0.44-7.90; P = .40) or uterine rupture (no case). In conclusion, current evidence based on randomized trials does not support a specific type of uterine closure for optimal maternal outcomes and is insufficient to conclude about the risk of uterine rupture. Single-layer closure and locked first layer are possibly coupled with thinner residual myometrium thickness.

  18. Solid state double layer capacitor based on a polyether polymer electrolyte blend and nanostructured carbon black electrode composites

    NASA Astrophysics Data System (ADS)

    Lavall, Rodrigo L.; Borges, Raquel S.; Calado, Hállen D. R.; Welter, Cezar; Trigueiro, João P. C.; Rieumont, Jacques; Neves, Bernardo R. A.; Silva, Glaura G.

    An all solid double layer capacitor was assembled by using poly(ethylene oxide)/poly(propylene glycol)- b-poly(ethylene glycol)- b-poly(propylene glycol)-bis(2-aminopropyl ether) blend (PEO-NPPP) and LiClO 4 as polymer electrolyte layer and PEO-NPPP-carbon black (CB) as electrode film. High molecular weight PEO and the block copolymer NPPP with molecular mass of 2000 Da were employed, which means that the design is safe from the point of view of solvent or plasticizer leakage and thus, a separator is not necessary. Highly conductive with large surface area nanostructured carbon black was dispersed in the polymer blend to produce the electrode composite. The electrolyte and electrode multilayers prepared by spray were studied by differential scanning calorimetry, atomic force microscopy (AFM) and impedance spectroscopy. The ionic conductivity as a function of temperature was fitted with the Williams-Landel-Ferry equation, which indicates a conductivity mechanism typical of solid polymer electrolyte. AFM images of the nanocomposite electrode showed carbon black particles of approximately 60 nm in size well distributed in a semicrystalline and porous polymer blend coating. The solid double layer capacitor with 10 wt.% CB was designed with final thickness of approximately 130 μm and delivered a capacitance of 17 F g -1 with a cyclability of more than 1000 cycles. These characteristics make possible the construction of a miniature device in complete solid state which will avoid electrolyte leakage and present a performance superior to other similar electric double layer capacitors (EDLCs) presented in literature, as assessed in specific capacitance by total carbon mass.

  19. FTRIFS biosensor based on double layer porous silicon as a LC detector for target molecule screening from complex samples.

    PubMed

    Shang, Yunling; Zhao, Weijie; Xu, Erchao; Tong, Changlun; Wu, Jianmin

    2010-01-15

    Post-column identification of target compounds in complex samples is one of the major tasks in drug screening and discovery. In this work, we demonstrated that double layer porous silicon (PSi) attached with affinity ligand could serve as a sensing element for post-column detection of target molecule by Fourier transformed reflectometric interference spectroscopy (FTRIFS), in which trypsin and its inhibitor were used as the model probe-target system. The double layer porous silicon was prepared by electrical etching with a current density of 500 mA/cm(2), followed by 167 mA/cm(2). Optical measurements indicated that trypsin could infiltrate into the outer porous layer (porosity 83.6%), but was excluded by the bottom layer (porosity 52%). The outer layer, attached with trypsin by standard amino-silane and glutaraldehyde chemistry, could specifically bind with the trypsin inhibitor, acting as a sample channel, while the bottom layer served as a reference signal channel. The binding event between the attached trypsin and trypsin inhibitor samples could be detected by FTRIFS in real-time through monitoring the optical thickness change of the porous silicon layer. The baseline drift caused by sample matrix variation could be effectively eliminated by a signal correction method. Optical signals had a linear relationship with the concentration of trypsin inhibitor in the range of 10-200 ng mL(-1). The FTRIFS biosensor based on double layer porous silicon could be combined with a UV detector for screening the target molecule from complex component mixtures separated by a LC column. Using an LC-UV-FTRIFS system, a fraction containing a trypsin inhibitor could be separated from a soybean extract sample and identified in real-time.

  20. The fabrication of a double-layer atom chip with through silicon vias for an ultra-high-vacuum cell

    NASA Astrophysics Data System (ADS)

    Chuang, Ho-Chiao; Lin, Yun-Siang; Lin, Yu-Hsin; Huang, Chi-Sheng

    2014-04-01

    This study presents a double-layer atom chip that provides users with increased diversity in the design of the wire patterns and flexibility in the design of the magnetic field. It is more convenient for use in atomic physics experiments. A negative photoresist, SU-8, was used as the insulating layer between the upper and bottom copper wires. The electrical measurement results show that the upper and bottom wires with a width of 100 µm can sustain a 6 A current without burnout. Another focus of this study is the double-layer atom chips integrated with the through silicon via (TSV) technique, and anodically bonded to a Pyrex glass cell, which makes it a desired vacuum chamber for atomic physics experiments. Thus, the bonded glass cell not only significantly reduces the overall size of the ultra-high-vacuum (UHV) chamber but also conducts the high current from the backside to the front side of the atom chip via the TSV under UHV (9.5 × 10-10 Torr). The TSVs with a diameter of 70 µm were etched through by the inductively coupled plasma ion etching and filled by the bottom-up copper electroplating method. During the anodic bonding process, the electroplated copper wires and TSVs on atom chips also need to pass the examination of the required bonding temperature of 250 °C, under an applied voltage of 1000 V. Finally, the UHV test of the double-layer atom chips with TSVs at room temperature can be reached at 9.5 × 10-10 Torr, thus satisfying the requirements of atomic physics experiments under an UHV environment.