Definition of spacecraft standard interfaces by the NASA Space Assembly and Servicing Working Group (SASWG)

NASA Technical Reports Server (NTRS)

Radtke, Robert; Woolley, Charles; Arnold, Lana

1993-01-01

The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.

High Speed Digital Camera Technology Review

NASA Technical Reports Server (NTRS)

Clements, Sandra D.

2009-01-01

A High Speed Digital Camera Technology Review (HSD Review) is being conducted to evaluate the state-of-the-shelf in this rapidly progressing industry. Five HSD cameras supplied by four camera manufacturers participated in a Field Test during the Space Shuttle Discovery STS-128 launch. Each camera was also subjected to Bench Tests in the ASRC Imaging Development Laboratory. Evaluation of the data from the Field and Bench Tests is underway. Representatives from the imaging communities at NASA / KSC and the Optical Systems Group are participating as reviewers. A High Speed Digital Video Camera Draft Specification was updated to address Shuttle engineering imagery requirements based on findings from this HSD Review. This draft specification will serve as the template for a High Speed Digital Video Camera Specification to be developed for the wider OSG imaging community under OSG Task OS-33.

Microgravity strategic planning exercise

NASA Technical Reports Server (NTRS)

Halpern, Richard; Downey, Jim; Harvey, Harold

1991-01-01

The Center for Space and Advanced Technology supported a planning exercise for the Microgravity Program management at the Marshall Space Flight Center. The effort focused on the status of microgravity work at MSFC and elsewhere with the objective of preparing a goal-oriented strategic planning document which could be used for informational/brochure purposes. The effort entailed numerous interactions and presentations with Field Center programmatic components and Headquarters personnel. Appropriate material was consolidated in a draft format for a MSFC Strategic Plan.

78 FR 18674 - Invitation for Public Comment on Draft DOT Research, Development and Technology Strategic Plan...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

...-0002] Invitation for Public Comment on Draft DOT Research, Development and Technology Strategic Plan... for public comment on its draft strategic plan, U.S. Department of Transportation, Research, Development and Technology Strategic Plan FY 2013-2018. The new five-year strategic plan will guide the...

The NASA/DOE/DOD nuclear rocket propulsion project - FY 1991 status

NASA Technical Reports Server (NTRS)

Clark, John S.; Miller, Thomas J.

1991-01-01

NASA has initiated planning and critical technology development for nuclear rocket propulsion systems for Space Exploration Initiative missions to the moon and to Mars. Interagency agreements are being negotiated between NASA, the Department of Energy, and the Department of Defense for joint technology development activities. This paper summarizes the activities of the NASA project planning team in FY 1990 that led to the draft Nuclear Propulsion Project Plan, outlines the FY 1991 Interagency activities, and describes the current status of the project plan.

Introduction to MacDraft. High-Technology Training Module.

ERIC Educational Resources Information Center

Traxler, Gene

This training module on MacDraft is part of a computer drafting skills unit on communications technology for grades 9-12. The objective is for each student to complete a drawing on the MacIntosh computer using the MacDraft software program. This drawing is to be dimensioned with a dual system and is to include a border and title block. This module…

Yucca Mountain nuclear waste repository prompts heated congressional hearing

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-11-01

Although the final report of the Blue Ribbon Commission on America's Nuclear Future is not expected until January 2012, the tentative conclusions of the commission's draft report were dissected during a recent joint hearing by two subcommittees of the House of Representatives' Committee on Science, Space, and Technology. Among the more heated issues debated at the hearing was the fate of the stalled Yucca Mountain nuclear waste repository in Nevada. The Blue Ribbon Commission's (BRC) draft report includes recommendations for managing nuclear waste and for developing one or more permanent deep geological repositories and interim storage facilities, but the report does not address the future of Yucca Mountain. The BRC charter indicates that the commission is to "conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle." However, the draft report states that the commission was not asked to consider, and therefore did not address, several key issues. "We have not rendered an opinion on the suitability of the Yucca Mountain site or on the request to withdraw the license application for Yucca Mountain," the draft report states.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 4: Solar electric propulsion vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents the solar electric propulsion (SEP) concept design developed as part of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the SEP concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 2: Cryo/aerobrake vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The cryogenic/aerobrake (CAB) and the cryogenic all-propulsive (CAP) concept designs developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study are presented. The evolution of the CAB and CAP concepts is described along with the requirements, guidelines and assumptions for the designs. Operating modes and options are defined and systems descriptions of the vehicles are presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 5: Nuclear electric propulsion vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The nuclear electric propulsion (NEP) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study is presented. The evolution of the NEP concept is described along with the requirements, guidelines, and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 3: Nuclear thermal rocket vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents the nuclear thermal rocket (NTR) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the NTR concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 167.55-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must be...

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 167.55-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must be...

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 167.55-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must be...

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 167.55-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must be...

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 167.55-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must be...

Draft Genome Sequence of Solibacillus kalamii, Isolated from an Air Filter Aboard the International Space Station.

PubMed

Seuylemezian, Arman; Singh, Nitin K; Vaishampayan, Parag; Venkateswaran, Kasthuri

2017-08-31

We report here the draft genome of Solibacillus kalamii ISSFR-015, isolated from a high-energy particulate arrestance filter aboard the International Space Station. The draft genome sequence of this strain contains 3,809,180 bp with an estimated G+C content of 38.61%. Copyright © 2017 Seuylemezian et al.

Computer-Aided Drafting. Education for Technology Employment.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Technology.

This computer-aided drafting (CAD) curriculum was developed to provide drafting instructors in Illinois with a useful guide for relating an important new technological advance to the vocational classroom. The competency-based learning activity guides are written to be used with any CAD system being used at the secondary and postsecondary levels.…

77 FR 14855 - Notice of Availability and Request for Comment on the Draft Environmental Assessment (EA) for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-13

... Reusable Suborbital Rockets at the Mojave Air and Space Port AGENCY: Federal Aviation Administration (FAA... of SpaceShipTwo Reusable Suborbital Rockets at the Mojave Air and Space Port. The Draft EA was... licenses to operate SpaceShipTwo Reusable Suborbital Rockets and WhiteKnightTwo carrier aircraft at the...

X-33 Environmental Impact Statement: A Fast Track Approach

NASA Technical Reports Server (NTRS)

McCaleb, Rebecca C.; Holland, Donna L.

1998-01-01

NASA is required by the National Environmental Policy Act (NEPA) to prepare an appropriate level environmental analysis for its major projects. Development of the X-33 Technology Demonstrator and its associated flight test program required an environmental impact statement (EIS) under the NEPA. The EIS process is consists of four parts: the "Notice of Intent" to prepare an EIS and scoping; the draft EIS which is distributed for review and comment; the final ETS; and the "Record of Decision." Completion of this process normally takes from 2 - 3 years, depending on the complexity of the proposed action. Many of the agency's newest fast track, technology demonstration programs require NEPA documentation, but cannot sustain the lengthy time requirement between program concept development to implementation. Marshall Space Flight Center, in cooperation with Kennedy Space Center, accomplished the NEPA process for the X-33 Program in 13 months from Notice of Intent to Record of Decision. In addition, the environmental team implemented an extensive public involvement process, conducting a total of 23 public meetings for scoping and draft EIS comment along with numerous informal meetings with public officials, civic organizations, and Native American Indians. This paper will discuss the fast track approach used to successfully accomplish the NEPA process for X-33 on time.

Review of the Draft 2014 Science Mission Directorate Science Plan

NASA Technical Reports Server (NTRS)

2013-01-01

At the request of NASA's Science Mission Directorate (SMD), the National Research Council's (NRC's) Space Studies Board (SSB) initiated a study to review a draft of the SMD's 2014 Science Plan. The request for this review was made at a time when NASA is engaged in the final stages of a comprehensive, agency-wide effort to develop a new strategic plan and at a time when NASA's budget is under considerable stress. SMD's Science Plan serves to provide more detail on its four traditional science disciplines-astronomy and astrophysics, solar and space physics (also called heliophysics), planetary science, and Earth remote sensing and related activities-than is possible in the agency-wide Strategic Plan. In conducting its review of the draft Science Plan, the Committee on the Assessment of the NASA Science Mission Directorate 2014 Science Plan was charged to comment on the following specific areas: (1) Responsiveness to the NRC's guidance on key science issues and opportunities in recent NRC reports; (2) Attention to interdisciplinary aspects and overall scientific balance; (3) Identification and exposition of important opportunities for partnerships as well as education and public outreach; (4) Integration of technology development with the science program; (5) Clarity on how the plan aligns with SMD's strategic planning process; (6) General readability and clarity of presentation; and (7) Other relevant issues as determined by the committee. The main body of the report provides detailed findings and recommendations relating to the draft Science Plan. The highest-level, crosscutting issues are summarized here, and more detail is available in the main body of the report.

A Comparison of the Effectiveness between Computer Aided Drafting and the Traditional Drafting Techniques as Methods of Teaching Pictorial and Multiview Drawings.

ERIC Educational Resources Information Center

Kashef, Ali E.

A study was conducted to determine the effectiveness of teaching multiview and pictorial drawing using traditional methods and using computer-aided drafting (CAD). Research used a quasi-experimental design; subjects were 37 full- and part-time undergraduate students in industrial technology or technology education courses. The students were…

Improving Student Drafting Knowledge and Skills through the Use of Technology.

ERIC Educational Resources Information Center

Ramsey, Steven A.; Vedder, Charles V.

A program was developed to infuse technology into drafting strategies to enhance learning of 11th- and 12th-grade students in a middle-class community in central Illinois who exhibited signs of inadequate achievement related to technology use. To document the extent of students' lack of understanding technology, surveys regarding attitudes toward…

Drafting with Design in Mind

ERIC Educational Resources Information Center

Daugherty, Michael K.; Carter, Vinson

2011-01-01

Design and drafting are subjects long taught in technology education, and subjects that retain high status in the profession. Admittedly, since the initial publication of Standards for Technological Literacy in 2000, design has taken on a larger role and meaning in the technology education profession. However, design continues to be delivered…

Drafting. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials for drafting for students in grades 6-10 consists of an instructor's section and student materials. The instructor's section contains background information, suggested activities, and a list of suggested resources. A lesson plan for the 8-day module includes assignments; equipment, tools,…

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 1: Plenary Session

NASA Technical Reports Server (NTRS)

1991-01-01

Briefings from the plenary session of the conference on SSTAC/ARTS Review of the Draft Integrated Technology Plan (ITP) held on 24-28 Jun. 1991 are included. Viewgraphs from the presentations are included.

NASA Technology Area 07: Human Exploration Destination Systems Roadmap

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

2011-01-01

This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near-Earth objects (NEOs), which > 95% are asteroidal bodies, Phobos, Deimos, Mars, and beyond. The HEDS technology roadmap will strategically guide NASA and other U.S. Government agency technology investments that will result in capabilities enabling human exploration missions to diverse destinations generating high returns on investments.

A Path to Planetary Protection Requirements for Human Exploration: A Literature Review and Systems Engineering Approach

NASA Technical Reports Server (NTRS)

Johnson, James E.; Conley, Cassie; Siegel, Bette

2015-01-01

As systems, technologies, and plans for the human exploration of Mars and other destinations beyond low Earth orbit begin to coalesce, it is imperative that frequent and early consideration is given to how planetary protection practices and policy will be upheld. While the development of formal planetary protection requirements for future human space systems and operations may still be a few years from fruition, guidance to appropriately influence mission and system design will be needed soon to avoid costly design and operational changes. The path to constructing such requirements is a journey that espouses key systems engineering practices of understanding shared goals, objectives and concerns, identifying key stakeholders, and iterating a draft requirement set to gain community consensus. This paper traces through each of these practices, beginning with a literature review of nearly three decades of publications addressing planetary protection concerns with respect to human exploration. Key goals, objectives and concerns, particularly with respect to notional requirements, required studies and research, and technology development needs have been compiled and categorized to provide a current 'state of knowledge'. This information, combined with the identification of key stakeholders in upholding planetary protection concerns for human missions, has yielded a draft requirement set that might feed future iteration among space system designers, exploration scientists, and the mission operations community. Combining the information collected with a proposed forward path will hopefully yield a mutually agreeable set of timely, verifiable, and practical requirements for human space exploration that will uphold international commitment to planetary protection.

Space Telecommunications Radio Architecture (STRS)

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

2006-01-01

A software defined radio (SDR) architecture used in space-based platforms proposes to standardize certain aspects of radio development such as interface definitions, functional control and execution, and application software and firmware development. NASA has charted a team to develop an open software defined radio hardware and software architecture to support NASA missions and determine the viability of an Agency-wide Standard. A draft concept of the proposed standard has been released and discussed among organizations in the SDR community. Appropriate leveraging of the JTRS SCA, OMG's SWRadio Architecture and other aspects are considered. A standard radio architecture offers potential value by employing common waveform software instantiation, operation, testing and software maintenance. While software defined radios offer greater flexibility, they also poses challenges to the radio development for the space environment in terms of size, mass and power consumption and available technology. An SDR architecture for space must recognize and address the constraints of space flight hardware, and systems along with flight heritage and culture. NASA is actively participating in the development of technology and standards related to software defined radios. As NASA considers a standard radio architecture for space communications, input and coordination from government agencies, the industry, academia, and standards bodies is key to a successful architecture. The unique aspects of space require thorough investigation of relevant terrestrial technologies properly adapted to space. The talk will describe NASA s current effort to investigate SDR applications to space missions and a brief overview of a candidate architecture under consideration for space based platforms.

Space Telecommunications Radio Architecture (STRS): Technical Overview

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

2006-01-01

A software defined radio (SDR) architecture used in space-based platforms proposes to standardize certain aspects of radio development such as interface definitions, functional control and execution, and application software and firmware development. NASA has charted a team to develop an open software defined radio hardware and software architecture to support NASA missions and determine the viability of an Agency-wide Standard. A draft concept of the proposed standard has been released and discussed among organizations in the SDR community. Appropriate leveraging of the JTRS SCA, OMG s SWRadio Architecture and other aspects are considered. A standard radio architecture offers potential value by employing common waveform software instantiation, operation, testing and software maintenance. While software defined radios offer greater flexibility, they also poses challenges to the radio development for the space environment in terms of size, mass and power consumption and available technology. An SDR architecture for space must recognize and address the constraints of space flight hardware, and systems along with flight heritage and culture. NASA is actively participating in the development of technology and standards related to software defined radios. As NASA considers a standard radio architecture for space communications, input and coordination from government agencies, the industry, academia, and standards bodies is key to a successful architecture. The unique aspects of space require thorough investigation of relevant terrestrial technologies properly adapted to space. The talk will describe NASA's current effort to investigate SDR applications to space missions and a brief overview of a candidate architecture under consideration for space based platforms.

NASA's SDR Standard: Space Telecommunications Radio System

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Johnson, Sandra K.

2007-01-01

A software defined radio (SDR) architecture used in space-based platforms proposes to standardize certain aspects of radio development such as interface definitions, functional control and execution, and application software and firmware development. NASA has charted a team to develop an open software defined radio hardware and software architecture to support NASA missions and determine the viability of an Agency-wide Standard. A draft concept of the proposed standard has been released and discussed among organizations in the SDR community. Appropriate leveraging of the JTRS SCA, OMG s SWRadio Architecture and other aspects are considered. A standard radio architecture offers potential value by employing common waveform software instantiation, operation, testing and software maintenance. While software defined radios offer greater flexibility, they also poses challenges to the radio development for the space environment in terms of size, mass and power consumption and available technology. An SDR architecture for space must recognize and address the constraints of space flight hardware, and systems along with flight heritage and culture. NASA is actively participating in the development of technology and standards related to software defined radios. As NASA considers a standard radio architecture for space communications, input and coordination from government agencies, the industry, academia, and standards bodies is key to a successful architecture. The unique aspects of space require thorough investigation of relevant terrestrial technologies properly adapted to space. The talk will describe NASA s current effort to investigate SDR applications to space missions and a brief overview of a candidate architecture under consideration for space based platforms.

A Space-Based Point Design for Global Coherent Doppler Wind Lidar Profiling Matched to the Recent NASA/NOAA Draft Science Requirements

NASA Technical Reports Server (NTRS)

Kavaya, Michael J.; Emmitt, G. David; Frehlich, Rod G.; Amzajerdian, Farzin; Singh, Upendra N.

2002-01-01

An end-to-end point design, including lidar, orbit, scanning, atmospheric, and data processing parameters, for space-based global profiling of atmospheric wind will be presented. The point design attempts to match the recent NASA/NOAA draft science requirements for wind measurement.

46 CFR 169.755 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

46 CFR 169.755 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

46 CFR 169.755 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

46 CFR 169.755 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

46 CFR 169.755 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

TECHNOLOGY AND MANPOWER IN DESIGN AND DRAFTING 1965-75. MANPOWER RESEARCH BULLETIN NUMBER 12.

ERIC Educational Resources Information Center

Office of Manpower Policy, Evaluation, and Research (DOL), Washington, DC.

AS PART OF AN EXPERIMENTAL AND DEMONSTRATION PROJECT LAUNCHED BY THE DEPARTMENT OF LABOR IN 1965 TO EMPHASIZE LIKELY FUTURE TECHNOLOGICAL AND MANPOWER CHANGES, THIS STUDY OF THE DESIGN AND DRAFTING PROCESS AIMED TO IDENTIFY THE MAJOR TECHNOLOGICAL CHANGES IN THE NEXT 10 YEARS, TO DETERMINE THE EXTENT AND RATE OF DIFFUSION OF THESE CHANGES, AND TO…

A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students

ERIC Educational Resources Information Center

Katsioloudis, Petros; Jovanovic, Vukica; Jones, Mildred

2014-01-01

The main purpose of this study was to determine significant positive effects among the use of three different types of drafting models, and to identify whether any differences exist towards promotion of spatial visualization ability for students in Industrial Technology and Technology Education courses. In particular, the study compared the use of…

77 FR 52692 - NIST Federal Information Processing Standard (FIPS) 140-3 (Second Draft), Security Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

...-03] NIST Federal Information Processing Standard (FIPS) 140-3 (Second Draft), Security Requirements... Technology (NIST), Commerce. ACTION: Notice and Request for Comments. SUMMARY: The National Institute of Standards and Technology (NIST) seeks additional comments on specific sections of Federal Information...

Draft position paper on knowledge management in space activities

NASA Technical Reports Server (NTRS)

Holm, Jeanne; Moura, Denis

2003-01-01

As other fields of industry, space activities are facing the challenge of Knowledge Management and the International Academy of Astronautics decided to settle in 2002 a Study Group to analyse the problem and issue general guidelines. This communication presents the draft position paper of this group in view to be discussed during the 2003 IAF Congress.

Draft Genome Sequences of Two Aspergillus fumigatus Strains, Isolated from the International Space Station.

PubMed

Singh, Nitin Kumar; Blachowicz, Adriana; Checinska, Aleksandra; Wang, Clay; Venkateswaran, Kasthuri

2016-07-14

Draft genome sequences of Aspergillus fumigatus strains (ISSFT-021 and IF1SW-F4), opportunistic pathogens isolated from the International Space Station (ISS), were assembled to facilitate investigations of the nature of the virulence characteristics of the ISS strains to other clinical strains isolated on Earth. Copyright © 2016 Singh et al.

Drafting guidelines for occupational exposure to chemicals: the Dutch experience with the assessment of reproductive risks.

PubMed

Stijkel, A; van Eijndhoven, J C; Bal, R

1996-12-01

The Dutch procedure for standard setting for occupational exposure to chemicals, just like the European Union (EU) procedure, is characterized by an organizational separation between considerations of health on the one side, and of technology, economics, and policy on the other side. Health considerations form the basis for numerical guidelines. These guidelines are next combined with technical-economical considerations. Standards are then proposed, and are finally set by the Ministry of Social Affairs and Employment. An analysis of this procedure might be of relevance to the US, where other procedures are used and criticized. In this article we focus on the first stage of the standard-setting procedure. In this stage, the Dutch Expert Committee on Occupational Standards (DECOS) drafts a criteria document in which a health-based guideline is proposed. The drafting is based on a set of starting points for assessing toxicity. We raise the questions, "Does DECOS limit itself only to health considerations? And if not, what are the consequences of such a situation?" We discuss DECOS' starting points and analyze the relationships between those starting points, and then explore eight criteria documents where DECOS was considering reproductive risks as a possible critical effect. For various reasons, it will be concluded that the starting points leave much interpretative space, and that this space is widened further by the manner in which DECOS utilizes it. This is especially true in situations involving sex-specific risks and uncertainties in knowledge. Consequently, even at the first stage, where health considerations alone are intended to play a role, there is much room for other than health-related factors to influence decision making, although it is unavoidable that some interpretative space will remain. We argue that separating the various types of consideration should not be abandoned. Rather, through adjustments in the starting points and aspects of the procedure, clarity should be guaranteed about the way the interpretative space is being employed.

Software Defined Radio Standard Architecture and its Application to NASA Space Missions

NASA Technical Reports Server (NTRS)

Andro, Monty; Reinhart, Richard C.

2006-01-01

A software defined radio (SDR) architecture used in space-based platforms proposes to standardize certain aspects of radio development such as interface definitions, functional control and execution, and application software and firmware development. NASA has charted a team to develop an open software defined radio hardware and software architecture to support NASA missions and determine the viability of an Agency-wide Standard. A draft concept of the proposed standard has been released and discussed among organizations in the SDR community. Appropriate leveraging of the JTRS SCA, OMG's SWRadio Architecture and other aspects are considered. A standard radio architecture offers potential value by employing common waveform software instantiation, operation, testing and software maintenance. While software defined radios offer greater flexibility, they also poses challenges to the radio development for the space environment in terms of size, mass and power consumption and available technology. An SDR architecture for space must recognize and address the constraints of space flight hardware, and systems along with flight heritage and culture. NASA is actively participating in the development of technology and standards related to software defined radios. As NASA considers a standard radio architecture for space communications, input and coordination from government agencies, the industry, academia, and standards bodies is key to a successful architecture. The unique aspects of space require thorough investigation of relevant terrestrial technologies properly adapted to space. The talk will describe NASA's current effort to investigate SDR applications to space missions and a brief overview of a candidate architecture under consideration for space based platforms.

DRAFT of Final Report of the Assumable Waters Subcommittee Submitted to the National Advisory Council for Environmental Policy and Technology (NACEPT)

EPA Pesticide Factsheets

This is a draft of the recommendations that that Assumable Waters Subcommittee will present to NACEPT on May 10. It should be considered a draft until it is approved and transmitted to the EPA by NACEPT

77 FR 52024 - Notification of a Public Teleconference of the Chartered Science Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Amphibole Asbestos and (2) an SAB draft report regarding EPA's Scientific and Technological Achievement... review of an SAB draft report reviewing EPA's Toxicological Review of Libby Amphibole Asbestos. The... entitled ``Toxicological Review of Libby Amphibole Asbestos.'' The EPA's draft assessment evaluates cancer...

Curriculum Guide for Drafting Communication in Technology Education.

ERIC Educational Resources Information Center

Connecticut Industrial Technology Association.

Consistent with the principles of the Connecticut Common Core of Learning, this competency-based curriculum guide for drafting provides a reference guide for educators to research and prepare for teaching the field of drafting communications. The guide contains 44 units in three levels. The introductory level covers the following topics:…

77 FR 40586 - Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

...-01] Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter... Technology (NIST) seeks comments on Draft NISTIR 7823, Advanced Metering Infrastructure Smart Meter.... Electronic comments should be sent to: Michaela Iorga at [email protected]nist.gov , with a Subject line...

Drafting & Design Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

Drafting and Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This document provides lists of tasks, performance objectives, and enabling objectives for 1,800 hours of postsecondary instruction or 900 hours of secondary instruction in the drafting and design technology program. Following a list of tasks and an explanation of the program, the bulk of the document consists of 25 modules, each of which is a…

78 FR 63964 - Request for Comments on Draft NIST Interagency Report (NISTIR) 7628 Rev. 1, Guidelines for Smart...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Grid Cyber Security AGENCY: National Institute of Standards and Technology (NIST), Department of... and Technology (NIST) seeks comments on draft NISTIR 7628 Rev. 1, Guidelines for Smart Grid Cyber... (formerly the Cyber Security Working Group) of the Smart Grid Interoperability Panel. The document has been...

Data Base Management Systems Panel. Third workshop summary

NASA Technical Reports Server (NTRS)

Urena, J. L. (Editor)

1981-01-01

The discussions and results of a review by a panel of data base management system (DRMS) experts of various aspects of the use of DBMSs within NASA/Office of Space and Terrestrial Applications (OSTA) and related organizations are summarized. The topics discussed included the present status of the use of DBMS technology and of the various ongoing DBMS-related efforts within NASA. The report drafts of a study that seeks to determine the functional requirements for a generalized DBMS for the NASA/OSTA and related data bases are examined. Future problems and possibilities with the use of DBMS technology are also considered. A list of recommendations for NASA/OSTA data systems is included.

Closed-Cycle, Frequency-Stable CO2 Laser Technology

NASA Technical Reports Server (NTRS)

Batten, Carmen E. (Editor); Miller, Irvin M. (Editor); Wood, George M., Jr. (Editor); Willetts, David V. (Editor)

1987-01-01

These proceedings contain a collection of papers and comments presented at a workshop on technology associated with long-duration closed-cycle operation of frequency-stable, pulsed carbon dioxide lasers. This workshop was held at the NASA Langley Research Center June 10 to 12, 1986. The workshop, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Royal Signals and Radar Establishment (RSRE), was attended by 63 engineers and scientists from the United States and the United Kingdom. During the 2 1/2 days of the workshop, a number of issues relating to obtaining frequency-stable operation and to the catalytic control of laser gas chemistry were discussed, and specific recommendations concerning future activities were drafted.

NASA Space Technology Draft Roadmap Area 13: Ground and Launch Systems Processing

NASA Technical Reports Server (NTRS)

Clements, Greg

2011-01-01

This slide presentation reviews the technology development roadmap for the area of ground and launch systems processing. The scope of this technology area includes: (1) Assembly, integration, and processing of the launch vehicle, spacecraft, and payload hardware (2) Supply chain management (3) Transportation of hardware to the launch site (4) Transportation to and operations at the launch pad (5) Launch processing infrastructure and its ability to support future operations (6) Range, personnel, and facility safety capabilities (7) Launch and landing weather (8) Environmental impact mitigations for ground and launch operations (9) Launch control center operations and infrastructure (10) Mission integration and planning (11) Mission training for both ground and flight crew personnel (12) Mission control center operations and infrastructure (13) Telemetry and command processing and archiving (14) Recovery operations for flight crews, flight hardware, and returned samples. This technology roadmap also identifies ground, launch and mission technologies that will: (1) Dramatically transform future space operations, with significant improvement in life-cycle costs (2) Improve the quality of life on earth, while exploring in co-existence with the environment (3) Increase reliability and mission availability using low/zero maintenance materials and systems, comprehensive capabilities to ascertain and forecast system health/configuration, data integration, and the use of advanced/expert software systems (4) Enhance methods to assess safety and mission risk posture, which would allow for timely and better decision making. Several key technologies are identified, with a couple of slides devoted to one of these technologies (i.e., corrosion detection and prevention). Development of these technologies can enhance life on earth and have a major impact on how we can access space, eventually making routine commercial space access and improve building and manufacturing, and weather forecasting for example for the effect of these process improvements on our daily lives.

EPA scientific integrity policy draft

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-08-01

The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

75 FR 75704 - Notice of Availability of Draft Supplement to the Environmental Assessment for the Proposed Pa...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

... irradiation, and (3) alternative sites for Pa'ina's irradiator. DATES: The public comment period on the Draft...'s irradiator, (2) electron-beam technology as an alternative to cobalt-60 irradiation, and (3... be used for the production and research irradiation of food, cosmetic, and pharmaceutical products...

A Thesaurus for Information Technology and Education. Occasional Paper ITE/6/86.

ERIC Educational Resources Information Center

Lewis, R.

Prepared for use by the Information Technology and Education (ITE) Programme of the Economic and Social Science Research Council (ESRC), this draft document is based on the 1984 EUDISED (European Documentation and Information System for Education) Thesaurus for Information Processing. This draft is a modified thesaurus which aims to keep as close…

A Guide for Planning Drafting and Design Technology Programs. Section III, Data Collection and Analysis.

ERIC Educational Resources Information Center

1971

This document, the second of three related reports, constitutes the data collection and analysis section of the study designed to provide information for preparing a planning guide for drafting and design technology programs. The curriculum survey instrument mailed to 26 schools, contained questions regarding: (1) length of semesters, (2)…

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

Reflections on the Draft National Educational Technology Plan 2010: Foundations for Transformation

ERIC Educational Resources Information Center

Dede, Chris

2010-01-01

This article provides personal reflections about aspects of the draft "National Educational Technology Plan 2010". Its focus is on ideas in the Plan that could be foundational for transforming our industrial-era schooling system. In sharing these thoughts, the author is speaking only for himself: they do not necessarily reflect the discussions or…

Response to the Articles on the Draft 2010 National Educational Technology Plan

ERIC Educational Resources Information Center

Atkins, Dan; Bennett, John; Brown, John Seely; Dede, Chris; Fishman, Barry; Means, Barbara, Pea, Roy; Thille, Candace; Williams, Brenda

2011-01-01

As people who were involved with drafting the 2010 National Educational Technology Plan (NETP), the authors have taken the opportunity to respond to the very interesting perspectives in this special issue. The thoughts here represent only their views and are not an official statement of either the US Department of Education or the NETP Technical…

Geothermal space/water heating for City of Mammoth Lakes, California. Draft final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sims, A.V.; Racine, W.C.

1977-09-01

The results of a study to determine the technical, economic and environmental feasibility of geothermal district heating for Mammoth Lakes Village, California are presented. The geothermal district heating system selected is technically feasible and uses existing technology in its design and operation. During a preliminary environmental assessment, no potential adverse environmental impacts could be identified of sufficient consequence to preclude the construction and operation of the proposed district heating system. A follow-on program aimed at implementing district heating in Mammoth is outlined.

The K-8 Aeronautics Internet Textbook

NASA Technical Reports Server (NTRS)

2002-01-01

Efforts were focused on web site migration, from UC (University of California) Davis to the National Business Aviation Association's (NBAA) web site. K8AIT (K-8 Aeronautics Internet Textbook), which has remained an unadvertised web site, receives almost two million hits per month. Project continuation funding with the National Business Aviation Association is being pursued. A Memorandum of Understanding (MOU) between NASA Ames LTP (Learning Technologies Project) and Cislunar has been drafted and approved by NASA's legal department. Additional web content on space flight and the Wright brothers has been added in English and Spanish.

Draft Genome Sequences of Biosafety Level 2 Opportunistic Pathogens Isolated from the Environmental Surfaces of the International Space Station.

PubMed

Checinska Sielaff, Aleksandra; Singh, Nitin K; Allen, Jonathan E; Thissen, James; Jaing, Crystal; Venkateswaran, Kasthuri

2016-12-29

The draft genome sequences of 20 biosafety level 2 (BSL-2) opportunistic pathogens isolated from the environmental surfaces of the International Space Station (ISS) were presented. These genomic sequences will help in understanding the influence of microgravity on the pathogenicity and virulence of these strains when compared with Earth strains. Copyright © 2016 Checinska Sielaff et al.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 8: Aerothermodynamics Automation and Robotics (A/R) systems sensors, high-temperature superconductivity

NASA Technical Reports Server (NTRS)

1991-01-01

Viewgraphs of briefings presented at the SSTAC/ARTS review of the draft Integrated Technology Plan (ITP) on aerothermodynamics, automation and robotics systems, sensors, and high-temperature superconductivity are included. Topics covered include: aerothermodynamics; aerobraking; aeroassist flight experiment; entry technology for probes and penetrators; automation and robotics; artificial intelligence; NASA telerobotics program; planetary rover program; science sensor technology; direct detector; submillimeter sensors; laser sensors; passive microwave sensing; active microwave sensing; sensor electronics; sensor optics; coolers and cryogenics; and high temperature superconductivity.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 8: Aerothermodynamics Automation and Robotics (A/R) systems sensors, high-temperature superconductivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Viewgraphs of briefings presented at the SSTAC/ARTS review of the draft Integrated Technology Plan (ITP) on aerothermodynamics, automation and robotics systems, sensors, and high-temperature superconductivity are included. Topics covered include: aerothermodynamics; aerobraking; aeroassist flight experiment; entry technology for probes and penetrators; automation and robotics; artificial intelligence; NASA telerobotics program; planetary rover program; science sensor technology; direct detector; submillimeter sensors; laser sensors; passive microwave sensing; active microwave sensing; sensor electronics; sensor optics; coolers and cryogenics; and high temperature superconductivity.

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

46 CFR 58.01-25 - Means of stopping machinery.

Code of Federal Regulations, 2010 CFR

2010-10-01

... forced-draft and induced-draft fans, fuel-oil transfer pumps, fuel-oil unit and service pumps, and... space concerned so that the fans or pumps may be stopped in case of fire in the compartment in which...

Draft Genome Sequences from a Novel Clade of Bacillus cereus Sensu Lato Strains, Isolated from the International Space Station.

PubMed

Venkateswaran, Kasthuri; Checinska Sielaff, Aleksandra; Ratnayake, Shashikala; Pope, Robert K; Blank, Thomas E; Stepanov, Victor G; Fox, George E; van Tongeren, Sandra P; Torres, Clinton; Allen, Jonathan; Jaing, Crystal; Pierson, Duane; Perry, Jay; Koren, Sergey; Phillippy, Adam; Klubnik, Joy; Treangen, Todd J; Rosovitz, M J; Bergman, Nicholas H

2017-08-10

The draft genome sequences of six Bacillus strains, isolated from the International Space Station and belonging to the Bacillus anthracis - B. cereus - B. thuringiensis group, are presented here. These strains were isolated from the Japanese Experiment Module (one strain), U.S. Harmony Node 2 (three strains), and Russian Segment Zvezda Module (two strains). Copyright © 2017 Venkateswaran et al.

Effectiveness of Drafting Models for Engineering Technology Students and Impacts on Spatial Visualization Ability: An Analysis and Consideration of Critical Variables

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Stefaniak, Jill E.

2018-01-01

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5…

KSC-2011-7886

NASA Image and Video Library

2011-11-23

CAPE CANAVERAL, Fla. -- Media learn about the plans Space Exploration Technologies Corp. (SpaceX) has to take NASA astronauts to the International Space Station at Space Launch Complex-40 on Cape Canaveral Air Force Station. SpaceX is working to make its Falcon 9 rocket and Dragon capsule safe for humans for NASA's Commercial Crew Program (CCP) under the Commercial Crew Development Round 2 (CCDev2) activities. SpaceX already is developing these systems under NASA's Commercial Orbital Transportation System (COTS) Program to take supplies to the space station. Scott Henderson, director of SpaceX mission assurance, explained that the company is drafting designs to make the Dragon capsule crew-capable with life support systems while meeting CCP's safety requirements. One such option under discussion is a launch abort system that would push astronauts away from the launch pad in the event of an emergency, which is different than traditional pull systems. It's the freedom to develop innovative solutions such as this that CCP hopes will drive down the cost of space travel as well as open up space to more people than ever before. CCP, which is based at NASA's Kennedy Space Center in Florida, partnered with seven aerospace companies to mature launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. (ATK) of Promontory, Utah, Blue Origin of Kent, Wash., The Boeing Co., of Houston, Excalibur Almaz Inc. of Houston, Sierra Nevada Corp. of Louisville, Colo., Space Exploration Technologies (SpaceX) of Hawthorne, Calif., and United Launch Alliance (ULA) of Centennial, Colo. For more information, visit www.nasa.gov/exploration/commercial Photo credit: Jim Grossmann

KSC-2011-7885

NASA Image and Video Library

2011-11-23

CAPE CANAVERAL, Fla. -- Media learn about the plans Space Exploration Technologies Corp. (SpaceX) has to take NASA astronauts to the International Space Station at Space Launch Complex-40 on Cape Canaveral Air Force Station. SpaceX is working to make its Falcon 9 rocket and Dragon capsule safe for humans for NASA's Commercial Crew Program (CCP) under the Commercial Crew Development Round 2 (CCDev2) activities. SpaceX already is developing these systems under NASA's Commercial Orbital Transportation System (COTS) Program to take supplies to the space station. Scott Henderson, director of SpaceX mission assurance, explained that the company is drafting designs to make the Dragon capsule crew-capable with life support systems while meeting CCP's safety requirements. One such option under discussion is a launch abort system that would push astronauts away from the launch pad in the event of an emergency, which is different than traditional pull systems. It's the freedom to develop innovative solutions such as this that CCP hopes will drive down the cost of space travel as well as open up space to more people than ever before. CCP, which is based at NASA's Kennedy Space Center in Florida, partnered with seven aerospace companies to mature launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. (ATK) of Promontory, Utah, Blue Origin of Kent, Wash., The Boeing Co., of Houston, Excalibur Almaz Inc. of Houston, Sierra Nevada Corp. of Louisville, Colo., Space Exploration Technologies (SpaceX) of Hawthorne, Calif., and United Launch Alliance (ULA) of Centennial, Colo. For more information, visit www.nasa.gov/exploration/commercial Photo credit: Jim Grossmann

COMPUTER-AIDED DRAFTING AND DESIGN, A THREE-WEEK SUMMER INSTITUTE TRAINING PROGRAM (MIAMI-DADE JUNIOR COLLEGE, MIAMI, FLORIDA, JULY 10, 1967 - JULY 28, 1967). FINAL REPORT.

ERIC Educational Resources Information Center

MORPHONIOS, ALEX G.

THIRTY-SIX INSTRUCTORS, SUPERVISORS, AND DEPARTMENT CHAIRMEN IN AREAS OF DRAFTING, ENGINEERING, MANUFACTURING, AND COMPUTER TECHNOLOGY AT JUNIOR COLLEGES, TECHNICAL, AND AREA VOCATIONAL SCHOOLS IN 20 STATES ATTENDED A 3-WEEK SUMMER INSTITUTE TRAINING PROGRAM ON COMPUTER-AIDED DRAFTING AND DESIGN. EXPERIENCE IN PROGRAMING THE IBM SYSTEM 1620 WITH…

76 FR 82306 - Draft Guidance for Industry on Use of Histology in Biomarker Qualification Studies; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... evolution and reversibility of morphologic changes. Because of the many variations in the practice of..., and other forms of information technology. This draft guidance refers to previously approved...

California Diploma Project Technical Report II: Alignment Study--Alignment Study of the Health Sciences and Medical Technology Draft Standards and California's Exit Level Common Core State Standards

ERIC Educational Resources Information Center

McGaughy, Charis; de Gonzalez, Alicia

2012-01-01

The California Department of Education is in the process of revising the Career and Technical Education (CTE) Model Curriculum Standards. The Educational Policy Improvement Center (EPIC) conducted an investigation of the draft version of the Health Sciences and Medical Technology Standards (Health Science). The purpose of the study is to…

Telescience Testbed Pilot Program

NASA Technical Reports Server (NTRS)

Gallagher, Maria L. (Editor); Leiner, Barry M. (Editor)

1988-01-01

The Telescience Testbed Pilot Program is developing initial recommendations for requirements and design approaches for the information systems of the Space Station era. During this quarter, drafting of the final reports of the various participants was initiated. Several drafts are included in this report as the University technical reports.

For Drafting Programs--Computer Graphics in Industrial Tech.

ERIC Educational Resources Information Center

Sutliff, Ron

1980-01-01

Posits that computer-aided drafting and design should be introduced to students in industrial technology programs. Discusses ways the technical educator can get involved in computer graphics to familiarize students with it without a large outlay of money. (JOW)

Industrial Orientation.

ERIC Educational Resources Information Center

Rasor, Leslie; Brooks, Valerie

These eight modules for an industrial orientation class were developed by a project to design an interdisciplinary program of basic skills training for disadvantaged students in a Construction Technology Program (see Note). The Drafting module overviews drafting career opportunities, job markets, salaries, educational requirements, and basic…

General Mission Analysis Tool (GMAT) User's Guide (Draft)

NASA Technical Reports Server (NTRS)

Hughes, Steven P.

2007-01-01

4The General Mission Analysis Tool (GMAT) is a space trajectory optimization and mission analysis system. This document is a draft of the users guide for the tool. Included in the guide is information about Configuring Objects/Resources, Object Fields: Quick Look-up Tables, and Commands and Events.

78 FR 68030 - Draft Guidance on Intellectual Property Rights for the National Network for Manufacturing...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

... Additive Manufacturing showed great promise for the defense, energy, space and commercial sectors of the Nation. In August, 2012, the selection of the National Additive Manufacturing Innovation Institute (NAMII...-01] Draft Guidance on Intellectual Property Rights for the National Network for Manufacturing...

76 FR 52694 - National Environmental Policy Act: Launch of NASA Routine Payloads on Expendable Launch Vehicles

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...: Launch of NASA Routine Payloads on Expendable Launch Vehicles AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of availability and request for comments on the draft environmental assessment (``Draft EA'') for launch of NASA routine payloads on expendable launch vehicles. SUMMARY...

Fiscal year 1981 US corn and soybeans pilot preliminary experiment plan, phase 1

NASA Technical Reports Server (NTRS)

Livingston, G. P.; Nedelman, K. S.; Norwood, D. F.; Smith, J. H. (Principal Investigator)

1981-01-01

A draft of the preliminary experiment plan for the foreign commodity production forecasting project fiscal year 1981 is presented. This draft plan includes: definition of the phase 1 and 2 U.S. pilot objectives; the proposed experiment design to evaluate crop calendar, area estimation, and area aggregation components for corn and soybean technologies using 1978/1979 crop-year data; a description of individual sensitivity evaluations of the baseline corn and soybean segment classification procedure; and technology and data assessment in support of the corn and soybean estimation technology for use in the U.S. central corn belt.

46 CFR 58.01-25 - Means of stopping machinery.

Code of Federal Regulations, 2014 CFR

2014-10-01

... forced-draft and induced-draft fans, fuel-oil transfer pumps, fuel-oil unit and service pumps, and similar fuel-oil pumps must be fitted with remote controls from a readily accessible position outside the space concerned so that the fans or pumps may be stopped in case of fire in the compartment in which...

46 CFR 58.01-25 - Means of stopping machinery.

Code of Federal Regulations, 2013 CFR

2013-10-01

... forced-draft and induced-draft fans, fuel-oil transfer pumps, fuel-oil unit and service pumps, and similar fuel-oil pumps must be fitted with remote controls from a readily accessible position outside the space concerned so that the fans or pumps may be stopped in case of fire in the compartment in which...

46 CFR 58.01-25 - Means of stopping machinery.

Code of Federal Regulations, 2011 CFR

2011-10-01

... forced-draft and induced-draft fans, fuel-oil transfer pumps, fuel-oil unit and service pumps, and similar fuel-oil pumps must be fitted with remote controls from a readily accessible position outside the space concerned so that the fans or pumps may be stopped in case of fire in the compartment in which...

46 CFR 58.01-25 - Means of stopping machinery.

Code of Federal Regulations, 2012 CFR

2012-10-01

... forced-draft and induced-draft fans, fuel-oil transfer pumps, fuel-oil unit and service pumps, and similar fuel-oil pumps must be fitted with remote controls from a readily accessible position outside the space concerned so that the fans or pumps may be stopped in case of fire in the compartment in which...

Competency Exams for Drafting-Related Occupations. Student and Instructor Manuals.

ERIC Educational Resources Information Center

Davis, Harley; Denison, John

This document contains 20 competency-based examinations with student and instructor manuals for drafting-related occupations. For each of the examinations, the student manual contains the following: the competency, the performance objective, directions, the facility to be used, the materials needed, a space to note time started and time finished,…

77 FR 24722 - Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...] Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes... Substances, Including Food Ingredients That Are Color Additives; Availability AGENCY: Food and Drug... Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food...

Flow characteristics of an inclined air-curtain range hood in a draft

PubMed Central

CHEN, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m3/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s. PMID:25810445

Flow characteristics of an inclined air-curtain range hood in a draft.

PubMed

Chen, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m(3)/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s.

Government Information Locator Service (GILS). Draft report to the Information Infrastructure Task Force

NASA Technical Reports Server (NTRS)

1994-01-01

This is a draft report on the Government Information Locator Service (GILS) to the National Information Infrastructure (NII) task force. GILS is designed to take advantage of internetworking technology known as client-server architecture which allows information to be distributed among multiple independent information servers. Two appendices are provided -- (1) A glossary of related terminology and (2) extracts from a draft GILS profile for the use of the American National Standard Information Retrieval Application Service Definition and Protocol Specification for Library Applications.

75 FR 67149 - Request for Public Comment on the Draft 2010 National Nanotechnology Initiative Strategic Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-01

... Nanotechnology Initiative Strategic Plan AGENCY: White House Office of Science and Technology Policy. ACTION... Nanotechnology Initiative (NNI) Strategic Plan. The draft plan is posted at http://strategy.nano.gov . Comments... information. Overview: The National Nanotechnology Initiative (NNI) Strategic Plan is the framework that...

A GUIDE FOR USE IN DEVELOPING TRAINING PROGRAMS IN DRAFTING AND DESIGN TECHNOLOGY.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson.

INITIAL COURSE OUTLINES WERE PREPARED BY INSTRUCTORS. INDIVIDUAL COURSES WERE THEN EXPANDED AND COORDINATED WITH OTHER COURSES. THE CURRICULUM LABORATORY STAFF REORGANIZED AND EDITED THE MATERIAL. A COMMITTEE OF INDUSTRIAL REPRESENTATIVES REVIEWED AND PERSONALLY ENDORSED IT AS BEING APPROPRIATE AND ADEQUATE FOR TRAINING DRAFTING AND DESIGN…

Airbrush Technology.

ERIC Educational Resources Information Center

Micklus, C. Samuel

To supplement and extend the offerings in the fields of industrial arts and vocational education, instructions in the use of the airbrush in design oriented activities are presented in this manual. It is written for and directed to the following types of programs: (1) high school--drafting, graphic arts; (2) vocational school--drafting, commercial…

77 FR 12836 - Draft Toxicological Review of Biphenyl: In Support of Summary Information on the Integrated Risk...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... prepared by the National Center for Environmental Assessment (NCEA) within the EPA Office of Research and... comments and/or provide written comments at the meeting regarding the draft assessment under review. Space... the Recent Additions and Publications menus at http://www.epa.gov/ncea . A limited number of paper...

Two-Year ET Programs: Essential Topics and Levels of Proficiency.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

1990-01-01

Reports the results of a survey of graduates, employers, and instructors of engineering technology programs for the essential topics in mechanical engineering technology, mechanical drafting/design technology, manufacturing engineering technology, and industrial engineering technology. Identifies the proficiency level suggested for classwork and…

75 FR 29357 - Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... technology that is used to aid in inspecting high-density cargo containers for contraband such as illicit... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and Operation of High Energy X-Ray...

77 FR 21538 - Announcing DRAFT Revisions to Federal Information Processing Standard (FIPS) 186-3, Digital...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... Technology (NIST) requests comments on revisions to Federal Information Processing Standard (FIPS) 186-3... http://csrc.nist.gov/publications/PubsDrafts.html . DATES: Comments must be received on or before [email protected]nist.gov , with ``186-3 Change Notice'' in the subject line. FOR FURTHER...

Measure Guideline: Combustion Safety for Natural Draft Appliances Through Appliance Zone Isolation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fitzgerald, J.; Bohac, D.

2014-04-01

This measure guideline covers how to assess and carry out the isolation of natural draft combustion appliances from the conditioned space of low-rise residential buildings. It deals with combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage. This subset of houses does not require comprehensive combustion safety tests and simplified prescriptive procedures can be used to address safety concerns. This allows residential energy retrofit contractors inexperienced in advanced combustion safety testing to effectively address combustion safety issues and allow energy retrofitsmore » including tightening and changes to distribution and ventilation systems to proceed.« less

Global partnerships: Expanding the frontiers of space exploration education

NASA Astrophysics Data System (ADS)

MacLeish, Marlene Y.; Akinyede, Joseph O.; Goswami, Nandu; Thomson, William A.

2012-11-01

Globalization is creating an interdependent space-faring world and new opportunities for international partnerships that strengthen space knowledge development and transfer. These opportunities have been codified in the Global Exploration Strategy, which endorses the "inspirational and educational value of space exploration" [1]. Also, during the 2010 Heads of Space Agencies Summit celebrating the International Academy of Astronautics' (IAA) 50th Anniversary, space-faring nations from across the globe issued a collective call in support of robust international partnerships to expand the frontiers of space exploration and generate knowledge for improving life on Earth [2]. Educators play a unique role in this mission, developing strategic partnerships and sharing best educational practices to (1) further global understanding of the benefits of space exploration for life on Earth and (2) prepare the next generation of scientists required for the 21st Century space workforce. Educational Outreach (EO) programs use evidence-based, measurable outcomes strategies and cutting edge information technologies to transfer space-based science, technology, engineering and mathematics (STEM) knowledge to new audiences; create indigenous materials with cultural resonance for emerging space societies; support teacher professional development; and contribute to workforce development initiatives that inspire and prepare new cohorts of students for space exploration careers. The National Space Biomedical Research Institute (NSBRI), the National Aeronautics and Space Administration (NASA) and Morehouse School of Medicine (MSM) have sustained a 13-year space science education partnership dedicated to these objectives. This paper briefly describes the design and achievements of NSBRI's educational programs, with special emphasis on those initiatives' involvement with IAA and the International Astronautical Congress (IAC). The IAA Commission 2 Draft Report, Space for Africa, is discussed as a model for developing sustainable partnerships and indigenous programs that support Africa's steady emergence as a global space-faring force. The IAC will provide timely: 2011 South Africa will provide timely feedback to refine that report's strategies for space life sciences education and public engagement in Africa and around the globe.

Knowledge-based systems in Japan

NASA Technical Reports Server (NTRS)

Feigenbaum, Edward; Engelmore, Robert S.; Friedland, Peter E.; Johnson, Bruce B.; Nii, H. Penny; Schorr, Herbert; Shrobe, Howard

1994-01-01

This report summarizes a study of the state-of-the-art in knowledge-based systems technology in Japan, organized by the Japanese Technology Evaluation Center (JTEC) under the sponsorship of the National Science Foundation and the Advanced Research Projects Agency. The panel visited 19 Japanese sites in March 1992. Based on these site visits plus other interactions with Japanese organizations, both before and after the site visits, the panel prepared a draft final report. JTEC sent the draft to the host organizations for their review. The final report was published in May 1993.

75 FR 57521 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... NATIONAL SCIENCE FOUNDATION Networking and Information Technology Research and Development (NITRD...) for Networking and Information Technology Research and Development (NITRD). ACTION: Notice, request.... SUMMARY: With this notice, the National Coordination Office for Networking and Information Technology...

75 FR 55360 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... NATIONAL SCIENCE FOUNDATION Networking and Information Technology Research and Development (NITRD... Information Technology Research and Development (NITRD). ACTION: Notice, request for public comment. FOR..., the National Coordination Office for Networking and Information Technology Research and Development...

Leveraging Current Initiatives to Bring Earth and Space Science into Elementary and Early Childhood Classrooms: NGSS in the Context of the Classroom Technology Push

NASA Astrophysics Data System (ADS)

Pacheco-Guffrey, H. A.

2016-12-01

Classroom teachers face many challenges today such as new standards, the moving targets of high stakes tests and teacher evaluations, inconsistent/insufficient access to resources and evolving education policies. Science education in the K-5 context is even more complex. NGSS can be intimidating, especially to K-5 educators with little science background. High stakes science tests are slow to catch up with newly drafted state level science standards, leaving teachers unsure about what to change and when to implement updated standards. Amid all this change, many schools are also piloting new technology programs. Though exciting, tech initiatives can also be overwhelming to teachers who are already overburdened. A practical way to support teachers in science while remaining mindful of these stressors is to design and share resources that leverage other K-5 school initiatives. This is often done by integrating writing or math into science learning to meet Common Core requirements. This presentation will suggest a method for bringing Earth and space science learning into elementary / early childhood classrooms by utilizing the current push for tablet technology. The goal is to make science integration reasonable by linking it to technology programs that are in their early stages. The roles and uses of K-5 Earth and space science apps will be examined in this presentation. These apps will be linked to NGSS standards as well as to the science and engineering practices. To complement the app resources, two support frameworks will also be shared. They are designed to help educators consider new technologies in the context of their own classrooms and lessons. The SAMR Model (Puentadura, 2012) is a conceptual framework that helps teachers think critically about the means and purposes of integrating technology into existing lessons. A practical framework created by the author will also be shared. It is designed to help teachers identify and address the important logistical and curricular decision-making aspects of integrating technology into K-5 classroom science. This method provides clear applications for new technology while also bringing meaningful Earth and space science learning into K-5 classrooms.

78 FR 72641 - Request for Public Comments on Draft Final Report on the Technical Investigation of the May 22...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

..., 2011 Tornado in Joplin, Missouri AGENCY: National Institute of Standards and Technology, United States... for public comment of the draft final report of the investigation conducted by NIST into the tornado... found on the Joplin Investigation Web page http://www.nist.gov/el/disasterstudies/weather/joplin_tornado...

Draft Genome Sequence of “Cohnella kolymensis” B-2846

PubMed Central

Kudryashova, Ekaterina B.; Ariskina, Elena V.

2016-01-01

A draft genome sequence of “Cohnella kolymensis” strain B-2846 was derived using IonTorrent sequencing technology. The size of the assembly and G+C content were in agreement with those of other species of this genus. Characterization of the genome of a novel species of Cohnella will assist in bacterial systematics. PMID:26769947

2005 Mississippi Curriculum Framework: Secondary General Drafting. (Program CIP: 15.1301 - Drafting and Design Technology/Technician, General)

ERIC Educational Resources Information Center

Kirk, Karen; Ladner, Daryl; Lewis, Carroll; Moran, Sheryl; Schneider, Chester; Strickland, Ruth Ann; Welch, Amanda

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

76 FR 13396 - Notice of Availability of the Draft Environmental Impact Statement for the Mountaineer Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

... deep saline geologic formations for permanent geologic storage. DATES: DOE invites the public to...; or by fax (304) 285-4403. The Draft EIS is available on DOE's NEPA Web page at: http://nepa.energy.gov/DOE_NEPA_documents.htm ; and on the National Energy Technology Laboratory's Web page at: http...

Conceptual designs and cost estimates of mechanical draft wet/dry and natural draft dry cooling systems using Curtiss-Wright integral fin-tube heat exchangers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haberski, R.J.; Bentz, J.C.

1979-04-01

This study was performed to establish a conceptual design and cost evaluation of an advanced technology mechanical draft wet/dry and natural draft dry cooling systems for large electric power plants using a high performance integral fin-tube heat transfer surface. This study was part of an overall DOE program to develop and demonstrate advanced concept cooling systems for large electric power plants. The results obtained show significant economic advantages compared to results previously published for conventional cooling systems. These advantages are due to the higher heat transfer and lower pressure loss which occur with the use of the selected multi-port integralmore » fin-tubes.« less

75 FR 16551 - Office of Commercial Space Transportation; Notice of Availability and Request for Comment on the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Office of Commercial Space... (Draft SEA) to the September 2008 Environmental Assessment for Space Florida Launch Site Operator License... States Air Force, cooperating agency ACTION: Notice of availability, notice of public comment period, and...

SSPACE-LongRead: scaffolding bacterial draft genomes using long read sequence information

PubMed Central

2014-01-01

Background The recent introduction of the Pacific Biosciences RS single molecule sequencing technology has opened new doors to scaffolding genome assemblies in a cost-effective manner. The long read sequence information is promised to enhance the quality of incomplete and inaccurate draft assemblies constructed from Next Generation Sequencing (NGS) data. Results Here we propose a novel hybrid assembly methodology that aims to scaffold pre-assembled contigs in an iterative manner using PacBio RS long read information as a backbone. On a test set comprising six bacterial draft genomes, assembled using either a single Illumina MiSeq or Roche 454 library, we show that even a 50× coverage of uncorrected PacBio RS long reads is sufficient to drastically reduce the number of contigs. Comparisons to the AHA scaffolder indicate our strategy is better capable of producing (nearly) complete bacterial genomes. Conclusions The current work describes our SSPACE-LongRead software which is designed to upgrade incomplete draft genomes using single molecule sequences. We conclude that the recent advances of the PacBio sequencing technology and chemistry, in combination with the limited computational resources required to run our program, allow to scaffold genomes in a fast and reliable manner. PMID:24950923

Security Analysis of DTN Architecture and Bundle Protocol Specification for Space-Based Networks

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2009-01-01

A Delay-Tolerant Network (DTN) Architecture (Request for Comment, RFC-4838) and Bundle Protocol Specification, RFC-5050, have been proposed for space and terrestrial networks. Additional security specifications have been provided via the Bundle Security Specification (currently a work in progress as an Internet Research Task Force internet-draft) and, for link-layer protocols applicable to Space networks, the Licklider Transport Protocol Security Extensions. This document provides a security analysis of the current DTN RFCs and proposed security related internet drafts with a focus on space-based communication networks, which is a rather restricted subset of DTN networks. Note, the original focus and motivation of DTN work was for the Interplanetary Internet . This document does not address general store-and-forward network overlays, just the current work being done by the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) Space Internetworking Services Area (SIS) - DTN working group under the DTN and Bundle umbrellas. However, much of the analysis is relevant to general store-and-forward overlays.

78 FR 69462 - National Nanotechnology Initiative Strategic Plan; National Science and Technology Council...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY OFFICE National Nanotechnology Initiative Strategic Plan; National Science and Technology Council; National Nanotechnology Coordination Office AGENCY: Executive... Nanotechnology Initiative (NNI) Strategic Plan. The draft plan will be posted at www.nano.gov/2014strategy...

Related Skills in the Marketplace. Final Report.

ERIC Educational Resources Information Center

John C. Calhoun State Community Coll., Decatur, AL.

A study identified related skills needed in five diploma programs offered in the Technical Division of John C. Calhoun State Community College in Decatur, Alabama. The programs were automotive technology, refrigeration/air conditioning, electrical technology, design drafting technology, and cosmetology. Thirty-five area businesses and industries…

NASA Technology Area 1: Launch Propulsion Systems

NASA Technical Reports Server (NTRS)

McConnaughey, Paul; Femminineo, Mark; Koelfgen, Syri; Lepsch, Roger; Ryan, Richard M.; Taylor, Steven A.

2011-01-01

This slide presentation reviews the technology advancements plans for the NASA Technology Area 1, Launch Propulsion Systems Technology Area (LPSTA). The draft roadmap reviews various propulsion system technologies that will be developed during the next 25 + years. This roadmap will be reviewed by the National Research Council which will issue a final report, that will include findings and recommendations.

An Emerging Technology Curriculum. Education for Technology Employment Project. Final Report.

ERIC Educational Resources Information Center

Harms, Dan; And Others

Individualized, competency-based curriculum materials were developed for a course on Principles of Technology, Units 1-6. New and updated curriculum materials in Drafting and Electronics and the Principles of Technology units were pilot tested in area vocational center settings in Illinois. A computer maintenance program was also developed but not…

Assessment of Knowledge and Skills Needed in Selected Engineering Technician Fields: Mechanical/Manufacturing/Industrial.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

A study identified the essential educational topics and the level of proficiency perceived to be required in these topics for selected two-year engineering technology programs in North Carolina. The four curricula studied were mechanical engineering technology, mechanical drafting and design technology, manufacturing engineering technology, and…

"Taking Women One Step Further..." Women in Technology. End of Year Report, July '93-June '94.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

The primary purpose of El Paso Community College's (EPCC's) Women in Technology (WIT) Program is to recruit women into nontraditional occupations through technical/vocational education and training. Credit training areas include automotive technology, drafting, electronics, fire technology, heating/ventilation and air conditioning, and welding.…

The Development of Statistics Textbook Supported with ICT and Portfolio-Based Assessment

NASA Astrophysics Data System (ADS)

Hendikawati, Putriaji; Yuni Arini, Florentina

2016-02-01

This research was development research that aimed to develop and produce a Statistics textbook model that supported with information and communication technology (ICT) and Portfolio-Based Assessment. This book was designed for students of mathematics at the college to improve students’ ability in mathematical connection and communication. There were three stages in this research i.e. define, design, and develop. The textbooks consisted of 10 chapters which each chapter contains introduction, core materials and include examples and exercises. The textbook developed phase begins with the early stages of designed the book (draft 1) which then validated by experts. Revision of draft 1 produced draft 2 which then limited test for readability test book. Furthermore, revision of draft 2 produced textbook draft 3 which simulated on a small sample to produce a valid model textbook. The data were analysed with descriptive statistics. The analysis showed that the Statistics textbook model that supported with ICT and Portfolio-Based Assessment valid and fill up the criteria of practicality.

Draft Genome Sequences of Two Fusarium oxysporum Isolates Cultured from Infected Zinnia hybrida Plants Grown on the International Space Station

PubMed Central

Urbaniak, Camilla; Massa, Gioia; Hummerick, Mary; Khodadad, Christina; Schuerger, Andrew

2018-01-01

ABSTRACT Here, we present the whole-genome sequences of two Fusarium oxysporum isolates cultured from infected Zinnia hybrida plants that were grown onboard the International Space Station (ISS). PMID:29773617

Ocean research plan reviewed

NASA Astrophysics Data System (ADS)

Zielinski, Sarah

A draft plan setting out priorities for U.S. ocean research generally was lauded for its clear and well-articulated view in a recent report from a committee of the U.S. National Research Council (NRC) of the US. National Academies. However, the committee advised that the plan would benefit from a bold vision for the future of ocean science research, additional details, and a reorganization to include cross-cutting research.The draft "Charting the Course for Ocean Science in the United States: Research Priorities for the Next Decade" was made available for public comment in September 2006 by the U.S. National Science and Technology Council's Joint Subcommittee on Ocean Science and Technology.

The genesis of the AIDS policy and AIDS Space in Brazil (1981-1989)

PubMed Central

de Barros, Sandra Garrido; Vieira-da-Silva, Ligia Maria

2016-01-01

ABSTRACT OBJECTIVE To analyze the genesis of the policy for controlling AIDS in Brazil. METHODS Socio-historical study (1981-1989), based on Bordieu’s genetic sociology, by document analysis, bibliographical review, and in-depth interviews. It consisted of a connection between the analysis of the paths of 33 agents involved in the creation of a social space focusing on AIDS-related issues and the historical possibility conditions of the drafting of a specific policy. RESULTS AIDS Space is a gathering point for the paths of agents from several social fields (medical, scientific, political, and bureaucratic fields). A specific space for relationships, which enabled the drafting of a policy for controlling the AIDS epidemic, but also a place where the authority to talk about the meaning of the disease, the methods to prevent and treat it was under dispute. The analysis showed how the various structures (democratic administrations in Sao Paulo and at the national level, with public health officers taking important positions) and the lack of a specific therapy contributed to social agents of different ranks and backgrounds to initially set prevention as a priority. CONCLUSIONS The rise of the sanitary movement, the organization of SUS, and the dominance of the medical field at the AIDS Space contributed to foster treatment as a part of the measures to control the epidemic. These conditions allowed drafting a policy based on the integrality of care, by linking prevention and treatment in the following decade, with important participation from state bureaucracy and researchers. PMID:27463255

[Embryos and embryo-like entities: problem of definition in the draft of the Swiss embryonic research law].

PubMed

Bürgin, M T; Bürkli, P

2002-11-01

At the end of May 2002, the draft of the Swiss "Federal Act on Research on Surplus Embryos and Embryonic Stem Cells" (EFG, Embryonic Research Act) reached the pre-legislative consultation stage. Under certain conditions, it would allow research on "surplus" embryos from in-vitro fertilization, and the derivation of embryonic stem cells from surplus embryos for research purposes. The EFG draft defines an embryo as "the developing organism from the point of nuclear fusion until the completion of organ development". New technological developments show that embryo-like entities can also be created without nuclear fusion having taken place. It remains unclear how to treat embryonic entities that don't fall under the draft's narrow definition of an embryo. Expanding this definition would be a welcome improvement.

Draft Genome Sequences of Two Fusarium oxysporum Isolates Cultured from Infected Zinnia hybrida Plants Grown on the International Space Station.

PubMed

Urbaniak, Camilla; Massa, Gioia; Hummerick, Mary; Khodadad, Christina; Schuerger, Andrew; Venkateswaran, Kasthuri

2018-05-17

Here, we present the whole-genome sequences of two Fusarium oxysporum isolates cultured from infected Zinnia hybrida plants that were grown onboard the International Space Station (ISS). Copyright © 2018 Urbaniak et al.

Emerging Media in Engineering Technology: A Case Study in Higher Education

ERIC Educational Resources Information Center

Ostler, Karl B.

2013-01-01

Technical illustration, 3D modeling, and design drafting under the discipline of engineering technology face rapid change and advancements in technologies such that educational leaders must continually anticipate change and make intelligent choices in providing a quality educational experience to adult students. However, how successful program…

Extensive Error in the Number of Genes Inferred from Draft Genome Assemblies

PubMed Central

Denton, James F.; Lugo-Martinez, Jose; Tucker, Abraham E.; Schrider, Daniel R.; Warren, Wesley C.; Hahn, Matthew W.

2014-01-01

Current sequencing methods produce large amounts of data, but genome assemblies based on these data are often woefully incomplete. These incomplete and error-filled assemblies result in many annotation errors, especially in the number of genes present in a genome. In this paper we investigate the magnitude of the problem, both in terms of total gene number and the number of copies of genes in specific families. To do this, we compare multiple draft assemblies against higher-quality versions of the same genomes, using several new assemblies of the chicken genome based on both traditional and next-generation sequencing technologies, as well as published draft assemblies of chimpanzee. We find that upwards of 40% of all gene families are inferred to have the wrong number of genes in draft assemblies, and that these incorrect assemblies both add and subtract genes. Using simulated genome assemblies of Drosophila melanogaster, we find that the major cause of increased gene numbers in draft genomes is the fragmentation of genes onto multiple individual contigs. Finally, we demonstrate the usefulness of RNA-Seq in improving the gene annotation of draft assemblies, largely by connecting genes that have been fragmented in the assembly process. PMID:25474019

Extensive error in the number of genes inferred from draft genome assemblies.

PubMed

Denton, James F; Lugo-Martinez, Jose; Tucker, Abraham E; Schrider, Daniel R; Warren, Wesley C; Hahn, Matthew W

2014-12-01

Current sequencing methods produce large amounts of data, but genome assemblies based on these data are often woefully incomplete. These incomplete and error-filled assemblies result in many annotation errors, especially in the number of genes present in a genome. In this paper we investigate the magnitude of the problem, both in terms of total gene number and the number of copies of genes in specific families. To do this, we compare multiple draft assemblies against higher-quality versions of the same genomes, using several new assemblies of the chicken genome based on both traditional and next-generation sequencing technologies, as well as published draft assemblies of chimpanzee. We find that upwards of 40% of all gene families are inferred to have the wrong number of genes in draft assemblies, and that these incorrect assemblies both add and subtract genes. Using simulated genome assemblies of Drosophila melanogaster, we find that the major cause of increased gene numbers in draft genomes is the fragmentation of genes onto multiple individual contigs. Finally, we demonstrate the usefulness of RNA-Seq in improving the gene annotation of draft assemblies, largely by connecting genes that have been fragmented in the assembly process.

DOD Information Technology Standard Guidance (ITSG) Version 3.1

DTIC Science & Technology

1997-04-07

from NGSBs later (e.g., OSFs Motif specification became the basis for IEEE 1295 . 1). Most consortia specifications are available now, do not overlap...Illumination) CIM Center for Information Management (DISA) CINC Conumnder in Chief CIS CASE Integration Services CJCS Chairman of the Joint Chiefs of...Compound Text Encoding CUA Common User Access DAC Discretionary Access Controls DAD Draft Addendum (ISO) DAM Draft Amendment (ISO) DAP Document

Draft Genome Sequences of Five Neonatal Meningitis-Causing Escherichia coli Isolates (SP-4, SP-5, SP-13, SP-46, and SP-65)

PubMed Central

Xu, Aixia; Johnson, James R.; Sheen, Shiowshuh

2018-01-01

ABSTRACT Neonatal meningitis-causing Escherichia coli isolates (SP-4, SP-5, SP-13, SP-46, and SP-65) were recovered between 1989 and 1997 from infants in the Netherlands. Here, we report the draft genome sequences of these five E. coli isolates, which are currently being used to validate food safety processing technologies. PMID:29674529

ISO WD 1856. Guideline for radiation exposure of nonmetallic materials. Present status

NASA Astrophysics Data System (ADS)

Briskman, B. A.

In the framework of the International Organization for Standardization (ISO) activity we started development of international standard series for space environment simulation at on-ground tests of materials. The proposal was submitted to ISO Technical Committee 20 (Aircraft and Space Vehicles), Subcommittee 14 (Space Systems and Operations) and was approved as Working Draft 15856 at the Los-Angeles meeting (1997). A draft of the first international standard "Space Environment Simulation for Radiation Tests of Materials" (1st version) was presented at the 7th International Symposium on Materials in Space Environment (Briskman et al, 1997). The 2nd version of the standard was limited to nonmetallic materials and presented at the 20th Space Simulation Conference (Briskman and Borson, 1998). It covers the testing of nonmetallic materials embracing also polymer composite materials including metal components (metal matrix composites) to simulated space radiation. The standard does not cover semiconductor materials. The types of simulated radiation include charged particles (electrons and protons), solar ultraviolet radiation, and soft X-radiation of solar flares. Synergistic interactions of the radiation environment are covered only for these natural and some induced environmental effects. This standard outlines the recommended methodology and practices for the simulation of space radiation on materials. Simulation methods are used to reproduce the effects of the space radiation environment on materials that are located on surfaces of space vehicles and behind shielding. It was discovered that the problem of radiation environment simulation is very complex and the approaches of different specialists and countries to the problem are sometimes quite opposite. To the present moment we developed seven versions of the standard. The last version is a compromise between these approaches. It was approved at the last ISO TC20/SC14/WG4 meeting in Houston, October 2002. At a splinter meeting of Int. Conference on Materials in a Space Environment, Noordwijk, Netherlands, ESA, June 2003, the experts from ESA, USA, France, Russia and Japan discussed the last version of the draft and approved it with a number of notes. A revised version of the standard will be presented this May at ISO TC20/SC14 meeting in Russia.

Draft Genome Sequences of Several Fungal Strains Selected for Exposure to Microgravity at the International Space Station

DOE PAGES

Singh, Nitin K.; Blachowicz, Adriana; Romsdahl, Jillian; ...

2017-04-13

Presented here are the whole-genome sequences of eight fungal strains that were selected for exposure to microgravity at the International Space Station. These baseline sequences will help to understand the observed production of novel bioactive compounds.

Draft Genome Sequences of Several Fungal Strains Selected for Exposure to Microgravity at the International Space Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Nitin K.; Blachowicz, Adriana; Romsdahl, Jillian

Presented here are the whole-genome sequences of eight fungal strains that were selected for exposure to microgravity at the International Space Station. These baseline sequences will help to understand the observed production of novel bioactive compounds.

75 FR 81284 - Nationwide Use of High Frequency and Ultra High Frequency Active SONAR Technology; Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... such as: The attacks of September 11, 2001; natural disasters such as Hurricanes Katrina and Rita of... technology during times of extreme weather, such as hurricanes, could be required for onshore areas that...

Exploring Communication Technology.

ERIC Educational Resources Information Center

Wood, Jimmie; Kellum, Mary

These teacher's materials for a seven-unit course were developed to help students develop technological literacy, career exploration, and problem-solving skills relative to the communication industries. The seven units are on an introduction to communication, verbal communication, design and sketching, drafting, graphic reproduction, photography,…

FORENSIC DNA BANKING LEGISLATION IN DEVELOPING COUNTRIES: PRIVACY AND CONFIDENTIALITY CONCERNS REGARDING A DRAFT FROM TURKISH LEGISLATION.

PubMed

Ilgili, Önder; Arda, Berna

This paper presents and analyses, in terms of privacy and confidentiality, the Turkish Draft Law on National DNA Database prepared in 2004, and concerning the use of DNA analysis for forensic objectives and identity verification in Turkey. After a short introduction including related concepts, we evaluate the draft law and provide articles about confidentiality. The evaluation reminded us of some important topics at international level for the developing countries. As a result, the need for sophisticated legislations about DNA databases, for solutions to issues related to the education of employees, and the technological dependency to other countries emerged as main challenges in terms of confidentiality for the developing countries. As seen in the Turkish Draft Law on National DNA Database, the protection of the fundamental rights and freedoms requires more care during the legislative efforts.

The Training and Technology Project Experimental Research Program for Vocational-Technical Teachers. Final Report.

ERIC Educational Resources Information Center

Merrill, E.L.; Russell, Wendell H.

Over a 31-month period from June 1966 to December 1968, the University of Tennessee and Union Carbide Corporation conducted preservice and inservice institutes for 160 industrial education teachers. These institutes carried college credit and covered Mechanical Technology and Drafting, Industrial Electronics Technology, Machine Shop and…

Civil Technology Applications. Teacher Edition [and] Student Edition.

ERIC Educational Resources Information Center

Schertz, Karen

Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

Legislative Origins of the National Aeronautics and Space Act of 1958. Monograph No. 8

NASA Technical Reports Server (NTRS)

Logsdon, John M. (Compiler)

1992-01-01

A transcript of a 1992 collective oral history with several individuals who helped to draft the Space Act in 1958 is presented. Contributors include: Paul G. Dembling, Willis H. Shapley, Eilene M. Galloway, Glen P. Wilson, George Reedy, H. Guyford Stever and George Siegel.

Draft Genome Sequences of Several Fungal Strains Selected for Exposure to Microgravity at the International Space Station

PubMed Central

Singh, Nitin K.; Blachowicz, Adriana; Romsdahl, Jillian; Wang, Clay; Torok, Tamas

2017-01-01

ABSTRACT The whole-genome sequences of eight fungal strains that were selected for exposure to microgravity at the International Space Station are presented here. These baseline sequences will help to understand the observed production of novel bioactive compounds. PMID:28408692

Draft genome sequence of Trametes villosa (Sw.) Kreisel CCMB561, a tropical white-rot Basidiomycota from the semiarid region of Brazil.

PubMed

Ferreira, Dalila Souza Santos; Kato, Rodrigo Bentes; Miranda, Fábio Malcher; da Costa Pinheiro, Kenny; Fonseca, Paula Luize Camargos; Tomé, Luiz Marcelo Ribeiro; Vaz, Aline Bruna Martins; Badotti, Fernanda; Ramos, Rommel Thiago Jucá; Brenig, Bertram; Azevedo, Vasco Ariston de Carvalho; Benevides, Raquel Guimarães; Góes-Neto, Aristóteles

2018-06-01

Herein, we present the draft genome of Trametes villosa isolate CCMB561, a wood-decaying Basidiomycota commonly found in tropical semiarid climate. The genome assembly was 57.98 Mb in size with an L50 of 691. A total of 16,711 putative protein-encoding genes was predicted, including 590 genes coding for carbohydrate-active enzymes (CAZy), directly involved in the decomposition of lignocellulosic materials. This is the first genome of this species of high interest in bioenergy research. The draft genome of Trametes villosa isolate CCMB561 will provide an important resource for future investigations in biofuel production, bioremediation and other green technologies.

Emergency Cooling of Nuclear Power Plant Reactors With Heat Removal By a Forced-Draft Cooling Tower

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murav’ev, V. P., E-mail: murval1@mail.ru

The feasibility of heat removal during emergency cooling of a reactor by a forced-draft cooling tower with accumulation of the peak heat release in a volume of precooled water is evaluated. The advantages of a cooling tower over a spray cooling pond are demonstrated: it requires less space, consumes less material, employs shorter lines in the heat removal system, and provides considerably better protection of the environment from wetting by entrained moisture.

Health impact assessment as an agent of policy change: improving the health impacts of the mayor of London's draft transport strategy.

PubMed

Mindell, J; Sheridan, L; Joffe, M; Samson-Barry, H; Atkinson, S

2004-03-01

To increase the positive and mitigate the negative health impacts of the mayor's draft transport strategy for London. A rapid prospective health impact assessment (HIA) of the penultimate draft of the strategy, using a review commissioned by the regional director of public health; an appraisal of congestion charging; and a participatory workshop. Two audits of changes were performed to assess the impact on policy of the HIA process. Regional government policy development. Recommendations from the rapid HIA were fed back into the drafting process. Changes (a) between the penultimate draft and the draft for public consultation and (b) between that and the final mayoral strategy. The draft transport strategy published for consultation differed in a number of respects from the previous version. Almost all the recommendations from the HIA were incorporated into the final strategy. Significant changes included promoting sustainable travel plans for workplaces and schools; giving priority to infrastructure and services that benefit London's deprived communities; increased emphasis on promoting walking and cycling and reducing reliance on private cars; and a commitment to track the health impacts of the final strategy and its implementation. Specific additions included re-allocating road space. HIA was successful in influencing the transport strategy for London, resulting in several improvements from a health viewpoint. HIA is an effective method both for bringing about significant change in policy proposals and in increasing policy makers' understanding of determinants of health and hence in changing attitudes of policy makers.

Advances in technologies and study design

USDA-ARS?s Scientific Manuscript database

Completion of the initial draft sequence of the human genome was the proving ground for and has ushered in significant advancements in technology of increasing sophistication and ever increasing amounts of data. Often, this combination has a multiplicative effect of stimulating research groups to co...

Develop nondestructive rapid pavement quality assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Develop nondestructive rapid pavement quality Assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

The fast changing landscape of sequencing technologies and their impact on microbial genome assemblies and annotation.

PubMed

Mavromatis, Konstantinos; Land, Miriam L; Brettin, Thomas S; Quest, Daniel J; Copeland, Alex; Clum, Alicia; Goodwin, Lynne; Woyke, Tanja; Lapidus, Alla; Klenk, Hans Peter; Cottingham, Robert W; Kyrpides, Nikos C

2012-01-01

The emergence of next generation sequencing (NGS) has provided the means for rapid and high throughput sequencing and data generation at low cost, while concomitantly creating a new set of challenges. The number of available assembled microbial genomes continues to grow rapidly and their quality reflects the quality of the sequencing technology used, but also of the analysis software employed for assembly and annotation. In this work, we have explored the quality of the microbial draft genomes across various sequencing technologies. We have compared the draft and finished assemblies of 133 microbial genomes sequenced at the Department of Energy-Joint Genome Institute and finished at the Los Alamos National Laboratory using a variety of combinations of sequencing technologies, reflecting the transition of the institute from Sanger-based sequencing platforms to NGS platforms. The quality of the public assemblies and of the associated gene annotations was evaluated using various metrics. Results obtained with the different sequencing technologies, as well as their effects on downstream processes, were analyzed. Our results demonstrate that the Illumina HiSeq 2000 sequencing system, the primary sequencing technology currently used for de novo genome sequencing and assembly at JGI, has various advantages in terms of total sequence throughput and cost, but it also introduces challenges for the downstream analyses. In all cases assembly results although on average are of high quality, need to be viewed critically and consider sources of errors in them prior to analysis. These data follow the evolution of microbial sequencing and downstream processing at the JGI from draft genome sequences with large gaps corresponding to missing genes of significant biological role to assemblies with multiple small gaps (Illumina) and finally to assemblies that generate almost complete genomes (Illumina+PacBio).

LANES - LOCAL AREA NETWORK EXTENSIBLE SIMULATOR

NASA Technical Reports Server (NTRS)

Gibson, J.

1994-01-01

The Local Area Network Extensible Simulator (LANES) provides a method for simulating the performance of high speed local area network (LAN) technology. LANES was developed as a design and analysis tool for networking on board the Space Station. The load, network, link and physical layers of a layered network architecture are all modeled. LANES models to different lower-layer protocols, the Fiber Distributed Data Interface (FDDI) and the Star*Bus. The load and network layers are included in the model as a means of introducing upper-layer processing delays associated with message transmission; they do not model any particular protocols. FDDI is an American National Standard and an International Organization for Standardization (ISO) draft standard for a 100 megabit-per-second fiber-optic token ring. Specifications for the LANES model of FDDI are taken from the Draft Proposed American National Standard FDDI Token Ring Media Access Control (MAC), document number X3T9.5/83-16 Rev. 10, February 28, 1986. This is a mature document describing the FDDI media-access-control protocol. Star*Bus, also known as the Fiber Optic Demonstration System, is a protocol for a 100 megabit-per-second fiber-optic star-topology LAN. This protocol, along with a hardware prototype, was developed by Sperry Corporation under contract to NASA Goddard Space Flight Center as a candidate LAN protocol for the Space Station. LANES can be used to analyze performance of a networking system based on either FDDI or Star*Bus under a variety of loading conditions. Delays due to upper-layer processing can easily be nullified, allowing analysis of FDDI or Star*Bus as stand-alone protocols. LANES is a parameter-driven simulation; it provides considerable flexibility in specifying both protocol an run-time parameters. Code has been optimized for fast execution and detailed tracing facilities have been included. LANES was written in FORTRAN 77 for implementation on a DEC VAX under VMS 4.6. It consists of two programs, a simulation program and a user-interface program. The simulation program requires the SLAM II simulation library from Pritsker and Associates, W. Lafayette IN; the user interface is implemented using the Ingres database manager from Relational Technology, Inc. Information about running the simulation program without the user-interface program is contained in the documentation. The memory requirement is 129,024 bytes. LANES was developed in 1988.

One of the larger open spaces on the third floor. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

One of the larger open spaces on the third floor. This space was used most often for drafting work and for general experimentation. Physical evidence on the ceiling indicates existence of partition walls for smaller rooms, but no photographic or documentary evidence has surfaced to verify this. - Thomas A. Edison Laboratories, Building No. 5, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

Draft Genome Sequences of Four Enterococcus faecium Strains Isolated from Argentine Cheese

PubMed Central

Martino, Gabriela P.; Quintana, Ingrid M.; Espariz, Martín; Blancato, Victor S.; Gallina Nizo, Gabriel; Esteban, Luis

2016-01-01

We report the draft genome sequences of four Enterococcus faecium strains isolated from Argentine regional cheeses. These strains were selected based on their technological properties, i.e., their ability to produce aroma compounds (diacetyl, acetoin, and 2,3-butanediol) from citrate. The goal of our study is to provide further genetic evidence for the rational selection of enterococci strains based on their pheno- and genotype in order to be used in cheese production. PMID:26847907

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

An overview of spray drift reduction testing of spray nozzles

USDA-ARS?s Scientific Manuscript database

The importance of the development and testing of drift reduction technologies (DRTs) is increasing. Common spray drift reduction technologies include spray nozzles and spray adjuvants. Following draft procedures developed for a DRT program, three spray nozzles were tested under high air speed cond...

78 FR 22889 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... the data collection plans and draft instruments, email [email protected] or call the HRSA Reports... technology to minimize the information collection burden. Information Collection Request Title: Data... utilize technology and systems for the purpose of collecting, validating and verifying information...

78 FR 27241 - Agency Information Collection Activities; Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-09

... the data collection plans and draft instruments, email [email protected] or call the HRSA Information... technology to minimize the information collection burden. Information Collection Request Title... instructions; to develop, acquire, install and utilize technology and systems for the purpose of collecting...

Rescuing Writing Instruction: How To Save Time & Money with Technology

ERIC Educational Resources Information Center

Kuriloff, Peshe C.

2004-01-01

This document focuses on the writing skills of college students. The days of students sifting through piles of file cards, producing detailed outlines, and handwriting drafts have slipped into the distant past. Students write quickly and casually with the assistance of technology, and common sense dictates that technology needs to be used to teach…

MECHANICAL TECHNOLOGY, DESIGN AND PRODUCTION, SUGGESTED TECHNIQUES FOR DETERMINING COURSES OF STUDY IN VOCATIONAL EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

PETERSON, CLARENCE E.

THIS PUBLICATION IS THE THIRD IN A SERIES DESIGNED TO PROVIDE INFORMATION TO HELP STATES ORGANIZE AND OPERATE PROGRAMS UNDER TITLE VIII OF THE NATIONAL DEFENSE EDUCATION ACT OF 1958. THE OTHER PUBLICATIONS ARE "MECHANICAL DRAFTING AND DESIGN TECHNOLOGY" (VT 001 823) AND "ELECTRICAL AND ELECTRONIC TECHNOLOGY" (VT 002 421). EACH…

Systems Security Engineering

DTIC Science & Technology

2010-08-22

Commission (IEC). “Information technology — Security techniques — Code of practice for information security management ( ISO /IEC 27002 ...Information technology — Security techniques — Information security management systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security...was a draft ISO standard on Systems and software engineering, Systems and software assurance [18]. Created by systems engineers for systems

Draft Genome Sequences of Several Fungal Strains Selected for Exposure to Microgravity at the International Space Station.

PubMed

Singh, Nitin K; Blachowicz, Adriana; Romsdahl, Jillian; Wang, Clay; Torok, Tamas; Venkateswaran, Kasthuri

2017-04-13

The whole-genome sequences of eight fungal strains that were selected for exposure to microgravity at the International Space Station are presented here. These baseline sequences will help to understand the observed production of novel bioactive compounds. Copyright © 2017 Singh et al.

Scenario drafting to anticipate future developments in technology assessment.

PubMed

Retèl, Valesca P; Joore, Manuela A; Linn, Sabine C; Rutgers, Emiel J T; van Harten, Wim H

2012-08-16

Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers.

Scenario drafting to anticipate future developments in technology assessment

PubMed Central

2012-01-01

Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers. PMID:22894140

Technology of Producing the Contact Connections of Superconductor Metal-Sheathed Cable

NASA Astrophysics Data System (ADS)

Jakubowski, Andrzej

2017-06-01

The technology of producing the current contact connections on the superconductor cable edges is presented. This lead cable is used as one of the major elements of the magnetic system in thermonuclear reactor construction, actuality for modern world energy. The technology is realized by the radial draft of metal thin-walled tube on the conductor's package. The filling of various profiles by round section wire is optimized. Geometrical characteristics of the dangerous crosssection (as a broken ring) of thin-walled tube injured by the sector cut-out are accounted. The comparative strength calculation of the solid and injured tubes at a longitudinal compression and lateral bending is acted. The radial draft mechanism of cylindrical thin-walled sheath with the wire packing is designed. The necessity to use the nonlinear theory for the sheaths calculate is set. The resilient co-operation of wires as the parallel located cylinders with the contact stripes of rectangular form is considered.

ESA Human rating Requirements:Status

NASA Astrophysics Data System (ADS)

Trujillo, M.; Sgobba, T.

2012-01-01

The European Space Agency (ESA) human rating safety requirements are based on heritage requirements of the International Space Station as well as the knowledge and experience derived from European participation on international partnerships. This expertise in conjunction with recommendations derived from past accidents (i.e.: Columbia) and lessons learned have led to the identification of m inimum core safety tech nical requirements for hum an rated space syst ems. These requirements apply to th e crewed space vehicle, integrated space system (i.e.: cre wed vehicle on its launcher) and its interfaces with control centres, la unch pad, etc. In 2009, a first draft was issued. Then, in the summer of 2010, ESA established a working group comprised of more than twenty experts (from disciplines including propulsion, pyrotechnics, structures, avionics, human factors and life support among others) across the Agency to review this draft. This paper provides an overview of ESA "Safety technical re quirements for human rated s pace systems" document, its scope a nd structure, as well as the planned steps for verification of these requirements in term s of achieving the identified safety objectives for crew safety in t erms of a quantitative risk evaluation.

Three Perspectives on Innovation--the Technological, the Political, and the Cultural. Draft.

ERIC Educational Resources Information Center

House, Ernest R.

Awareness of the three analytical perspectives on educational innovation leads to better understanding of educational change processes and better innovation strategies and policies. The three perspectives--technological, political, and cultural--are "screens" of facts, values, and presuppositions through which analysts view innovation.…

Long term integrity for space station power systems

NASA Technical Reports Server (NTRS)

Leckie, F. A.; Marriott, D. L.

1991-01-01

A study was made of the High Temperature Design Codes ASME N47, British R5, and the French RCC-MR Rules. It is concluded that all these codes provide a good basis of design for space application. The new British R5 is the most complete since it deals with the problem of defects. The ASME N47 was subjected longer to practical application and scrutiny. A draft code is introduced, and a proposed draft for high temperature design in which attempts were made to identify gaps and improvements is suggested. The design is limited by creep characteristics. In these circumstances, life is strongly affected by the selected value of the factor of safety. The factor of safety of primary loads adopted in the codes is 1.5. Maybe a lower value of 1.25 is permissible for use in space. Long term creep rupture data for HAYNES 188 is deficient and it is suggested that extrapolation methods be investigated.

Overview of GPS Adjacent Band Compatibility Assessment

DOT National Transportation Integrated Search

2014-09-18

January 13, 2012 National SpaceBased Positioning, Navigation, and Timing (PNT) Executive Committee (EXCOM) cochair letter to National Telecommunications and Information Administration (NTIA) proposed to draft new Global Positioning System (GPS)...

A proposed draft protocol for the European Convention on Biomedicine relating to research on the human embryo and fetus.

PubMed

Byk, J C

1997-02-01

The objective of this paper is to stimulate academic debate on embryo and fetal research from the perspective of the drafting of a protocol to the European Convention on Biomedicine. The Steering Committee on Bioethics of the Council of Europe was mandated to draw up such a protocol and for this purpose organised an important symposium on reproductive technologies and embryo research, in Strasbourg from the 16th to the 18th of December 1996.

Draft Genome Sequences of Four Enterococcus faecium Strains Isolated from Argentine Cheese.

PubMed

Martino, Gabriela P; Quintana, Ingrid M; Espariz, Martín; Blancato, Victor S; Gallina Nizo, Gabriel; Esteban, Luis; Magni, Christian

2016-02-04

We report the draft genome sequences of four Enterococcus faecium strains isolated from Argentine regional cheeses. These strains were selected based on their technological properties, i.e., their ability to produce aroma compounds (diacetyl, acetoin, and 2,3-butanediol) from citrate. The goal of our study is to provide further genetic evidence for the rational selection of enterococci strains based on their pheno- and genotype in order to be used in cheese production. Copyright © 2016 Martino et al.

The Quantum Leap in Special Education: New Information and Communication Technologies. Their Impact upon Educational Opportunities for Disabled People, Focussing on How Integration in the Ordinary Educational System Can Be Facilitated. Draft Document.

ERIC Educational Resources Information Center

Kristiansen, Rolf

This paper suggests means of merging educational ideas with new information and communication technologies to aid individuals with disabilities. New technologies discussed include microtechnology and integrated circuits, high speed processing and retrieval of information, and light-weight equipment, among others. New technologies can be used as…

Case Analysis Of The Joint High Speed Vessel Program: Defense Acquisition

DTIC Science & Technology

2016-09-01

reviews resulted in a series of Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial...requirements into a final and unique materiel solution for a system capability that is fielded. 14. SUBJECT TERMS Advanced Concept and Technology ...Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial, high-speed, shallow-draft

In Brief: Geoengineering draft statement

NASA Astrophysics Data System (ADS)

Showstack, Randy

2009-04-01

The American Meteorological Society (AMS) has prepared a draft policy statement on geoengineering the climate system, which the AMS Council is considering for approval. The statement notes, “Geoengineering will not substitute for either aggressive mitigation or proactive adaptation. It could contribute to a comprehensive risk management strategy to slow climate change and alleviate its negative impacts, but the potential for adverse and unintended consequences implies a need for adequate research, appropriate regulation, and transparent consideration.” The statement, if adopted, indicates that AMS recommends enhanced research on the scientific and technological potential for geoengineering the climate system; additional study of the historical, ethical, legal, political, and societal aspects of the geoengineering issues; and the development and analysis of policy options to promote transparency and international cooperation in exploring geoengineering options along with restrictions on reckless efforts to manipulate the climate system. AMS is accepting comments on the draft statement until 23 April. For more information, visit http://ametsoc.org/policy/draftstatements/index.html#draft.

Use of low-coverage, large-insert, short-read data for rapid and accurate generation of enhanced-quality draft Pseudomonas genome sequences.

PubMed

O'Brien, Heath E; Gong, Yunchen; Fung, Pauline; Wang, Pauline W; Guttman, David S

2011-01-01

Next-generation genomic technology has both greatly accelerated the pace of genome research as well as increased our reliance on draft genome sequences. While groups such as the Genomics Standards Consortium have made strong efforts to promote genome standards there is a still a general lack of uniformity among published draft genomes, leading to challenges for downstream comparative analyses. This lack of uniformity is a particular problem when using standard draft genomes that frequently have large numbers of low-quality sequencing tracts. Here we present a proposal for an "enhanced-quality draft" genome that identifies at least 95% of the coding sequences, thereby effectively providing a full accounting of the genic component of the genome. Enhanced-quality draft genomes are easily attainable through a combination of small- and large-insert next-generation, paired-end sequencing. We illustrate the generation of an enhanced-quality draft genome by re-sequencing the plant pathogenic bacterium Pseudomonas syringae pv. phaseolicola 1448A (Pph 1448A), which has a published, closed genome sequence of 5.93 Mbp. We use a combination of Illumina paired-end and mate-pair sequencing, and surprisingly find that de novo assemblies with 100x paired-end coverage and mate-pair sequencing with as low as low as 2-5x coverage are substantially better than assemblies based on higher coverage. The rapid and low-cost generation of large numbers of enhanced-quality draft genome sequences will be of particular value for microbial diagnostics and biosecurity, which rely on precise discrimination of potentially dangerous clones from closely related benign strains.

The Outlook in Engineering-Related Technology Fields

ERIC Educational Resources Information Center

Weeks, Peggie

2009-01-01

Community colleges have a long and impressive history of preparing a well-qualified technical workforce to meet the immediate and short-term needs of local and regional industries. Programs range from certificates in areas such as drafting, computer-aided design, and automotive technology to associate degrees in electrical and mechanical…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

Report on the Audit of Materials Technology

DTIC Science & Technology

1990-01-25

We are providing this report on the Audit of Materials Technology for your information and use. No comments were required or received on the draft...report. The audit was made from July through September 1989. The objectives of the audit were to evaluate the missions and functions assigned to DOD

You and Technology, A High School Case Study Text.

ERIC Educational Resources Information Center

Damaskos, Nickander J., Ed.; Smyth, Michael P., Ed.

This second draft of a manuscript for a high school engineering and technology course uses case studies as its format. The principles associated with various engineering problems are presented along with their effects on daily life. Topics include the computer, the automotive power system, satellite communications, the petroleum industry, water…

New Technologies, New Curricula.

ERIC Educational Resources Information Center

Speidel, Gisela E.

1995-01-01

This article describes the AutoCAD Laboratory at Hawaii's Kamehameha Secondary Schools, offering the perspective of the AutoCAD instructor and Technology Department Head, looking at a day in the AutoCAD Laboratory, and explaining how teaching students about computer-assisted design and drafting can prepare them for college or careers. (SM)

76 FR 12712 - Announcing Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-08

... FIPS 201-2 AGENCY: National Institute of Standards and Technology (NIST), Commerce. ACTION: Notice and request for comments. SUMMARY: The National Institute of Standards and Technology (NIST) publishes this... 201-1, and specific changes requested by Federal agencies and implementers. NIST has received numerous...

Strategies for optimizing BioNano and Dovetail explored through a second reference quality assembly for the legume model, Medicago truncatula.

PubMed

Moll, Karen M; Zhou, Peng; Ramaraj, Thiruvarangan; Fajardo, Diego; Devitt, Nicholas P; Sadowsky, Michael J; Stupar, Robert M; Tiffin, Peter; Miller, Jason R; Young, Nevin D; Silverstein, Kevin A T; Mudge, Joann

2017-08-04

Third generation sequencing technologies, with sequencing reads in the tens- of kilo-bases, facilitate genome assembly by spanning ambiguous regions and improving continuity. This has been critical for plant genomes, which are difficult to assemble due to high repeat content, gene family expansions, segmental and tandem duplications, and polyploidy. Recently, high-throughput mapping and scaffolding strategies have further improved continuity. Together, these long-range technologies enable quality draft assemblies of complex genomes in a cost-effective and timely manner. Here, we present high quality genome assemblies of the model legume plant, Medicago truncatula (R108) using PacBio, Dovetail Chicago (hereafter, Dovetail) and BioNano technologies. To test these technologies for plant genome assembly, we generated five assemblies using all possible combinations and ordering of these three technologies in the R108 assembly. While the BioNano and Dovetail joins overlapped, they also showed complementary gains in continuity and join numbers. Both technologies spanned repetitive regions that PacBio alone was unable to bridge. Combining technologies, particularly Dovetail followed by BioNano, resulted in notable improvements compared to Dovetail or BioNano alone. A combination of PacBio, Dovetail, and BioNano was used to generate a high quality draft assembly of R108, a M. truncatula accession widely used in studies of functional genomics. As a test for the usefulness of the resulting genome sequence, the new R108 assembly was used to pinpoint breakpoints and characterize flanking sequence of a previously identified translocation between chromosomes 4 and 8, identifying more than 22.7 Mb of novel sequence not present in the earlier A17 reference assembly. Adding Dovetail followed by BioNano data yielded complementary improvements in continuity over the original PacBio assembly. This strategy proved efficient and cost-effective for developing a quality draft assembly compared to traditional reference assemblies.

76 FR 22699 - Environmental Impacts Statements; Notice of Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

.... 20110126, Draft Supplement, MMS, 00, Gulf of Mexico Outer Continental Shelf Oil and Gas Lease Sales: 2011... Establish and Maintain Spaces--Defensible Fuel Profile Zones (DFPZs), Feather River Ranger District, Plumas...

Numerical Simulation and Validation of a High Head Model Francis Turbine at Part Load Operating Condition

NASA Astrophysics Data System (ADS)

Goyal, Rahul; Trivedi, Chirag; Kumar Gandhi, Bhupendra; Cervantes, Michel J.

2017-07-01

Hydraulic turbines are operated over an extended operating range to meet the real time electricity demand. Turbines operated at part load have flow parameters not matching the designed ones. This results in unstable flow conditions in the runner and draft tube developing low frequency and high amplitude pressure pulsations. The unsteady pressure pulsations affect the dynamic stability of the turbine and cause additional fatigue. The work presented in this paper discusses the flow field investigation of a high head model Francis turbine at part load: 50% of the rated load. Numerical simulation of the complete turbine has been performed. Unsteady pressure pulsations in the vaneless space, runner, and draft tube are investigated and validated with available experimental data. Detailed analysis of the rotor stator interaction and draft tube flow field are performed and discussed. The analysis shows the presence of a rotating vortex rope in the draft tube at the frequency of 0.3 times of the runner rotational frequency. The frequency of the vortex rope precession, which causes severe fluctuations and vibrations in the draft tube, is predicted within 3.9% of the experimental measured value. The vortex rope results pressure pulsations propagating in the system whose frequency is also perceive in the runner and upstream the runner.

Assembly and features of secondary metabolite biosynthetic gene clusters in Streptomyces ansochromogenes.

PubMed

Zhong, Xingyu; Tian, Yuqing; Niu, Guoqing; Tan, Huarong

2013-07-01

A draft genome sequence of Streptomyces ansochromogenes 7100 was generated using 454 sequencing technology. In combination with local BLAST searches and gap filling techniques, a comprehensive antiSMASH-based method was adopted to assemble the secondary metabolite biosynthetic gene clusters in the draft genome of S. ansochromogenes. A total of at least 35 putative gene clusters were identified and assembled. Transcriptional analysis showed that 20 of the 35 gene clusters were expressed in either or all of the three different media tested, whereas the other 15 gene clusters were silent in all three different media. This study provides a comprehensive method to identify and assemble secondary metabolite biosynthetic gene clusters in draft genomes of Streptomyces, and will significantly promote functional studies of these secondary metabolite biosynthetic gene clusters.

Evoqua RCRA Permit Application and Draft Permit Documents

EPA Pesticide Factsheets

Documents pertaining to the proposed RCRA permit for the Evoqua Water Technologies LLC carbon regeneration facility located on the Colorado River Indian Tribes (CRIT) reservation near Parker, Arizona.

Blueprint for a Better World...A Book That Introduces a New, Simpler, Comprehensive Method of Understanding Our Environment. Rough Draft.

ERIC Educational Resources Information Center

Richards, David B.

The world is growing technologically at a rapid pace and people's understanding of these new technological advances and their effects upon the world and its various populations and environments must keep up the pace. Technological advances bring with them ever greater potential problems for humanity and for the world environment. The complications…

Saturn Apollo Program

NASA Image and Video Library

1964-02-01

Temporary quarters in the Huntsville Industrial Center (HIC) building located in downtown Huntsville, Alabama, as Marshall Space Flight Center (MSFC) grew. This image shows drafting specialists from the Propulsion and Vehicle Engineering Laboratory at work in the HIC building.

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS) Evolution of Computer Integrated Manufacturing (CIM) Technologies. Version 2.0 Draft

DOT National Transportation Integrated Search

1988-11-01

During the past decade a great deal of effort has been focused on the advantages computerization can bring to engineering design and production activities. This is seen in such developments as Group Technology (GT), Manufacturing Resource Planning (M...

A Heuristic Approach to Creating Technological Fair Use Guidelines in Higher Education

ERIC Educational Resources Information Center

Roper, Jerry

2017-01-01

Higher education has experienced challenges defining and implementing copyright compliance. Confusion among faculty and staff appears to be common regarding copyright and fair use. The original copyright doctrine was drafted over 200 years ago, which predates practically all technological advances that have and will continue to occur. Change is…

76 FR 6496 - Special Flight Rules Area in the Vicinity of Grand Canyon National Park, Draft Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... being considered include: Alternative A Current Condition: Key elements are corridors open year round, annual allocation cap of 93,971, and no quiet technology incentive. Current tours for helicopters and... to quiet technology aircraft. Alternative F Modified Current Condition: Key elements are similar to...

76 FR 32886 - Control of Emissions From New Highway Vehicles and Engines; Guidance on EPA's Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... production is accounted for in API's certification program and that the follow-up audit program is showing... Selective Catalytic Reduction Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Request for... reduction (SCR) technology to meet emission standards for oxides of nitrogen (NO X ). This draft guidance...

CAD/CAM. High-Technology Training Module.

ERIC Educational Resources Information Center

Zuleger, Robert

This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

A Critical Review of the Massachusetts Next Generation Science and Technology/Engineering Standards. Policy Brief

ERIC Educational Resources Information Center

Metzenberg, Stan

2015-01-01

Stan Metzenberg offers a critical analysis of the draft "Massachusetts Science and Technology/Engineering Standards," which are for pre-Kindergarten to Grade 8 and introductory high school courses. Metzenberg claims that the document reveals significant, unacceptable gaps in science content, as well as some notable errors and…

78 FR 77440 - Notice of Availability of the Draft Environmental Impact Statement for the Disposal and Reuse of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

... former installation property by the DoN but has a higher density of residential development than under... property and includes a mix of land use types and densities, as well as open space and natural areas. The... spaces, best management practices for stormwater management, and green and sustainable design principles...

Guiding the process of health technology disinvestment.

PubMed

Ibargoyen-Roteta, Nora; Gutiérrez-Ibarluzea, Iñaki; Asua, José

2010-12-01

To develop a guideline for health technology disinvestment. The Nominal Group Technique was used to determine relevant aspects of disinvestment decision-making. Ideas reaching consensus and previous Spanish guidelines on the acquisition of new health technologies (GANT) and new genetic tests (GEN) structures were used to develop the domains and contents of GuNFT (Guideline for Not Funding Health Technologies). The draft was peer reviewed by local and international experts and their suggestions were incorporated to the first GuNFT version. Thirty-five ideas reached consensus. The most relevant ones referred to the reasons for disinvesting in a technology and the key aspects that would facilitate disinvestment acceptance. Considering both consensus ideas and GANT and GEN guidelines, the first GuNFT draft was elaborated. After the review process, section numbers and contents were changed. The resulting GuNFT guideline was finally divided into six domains related to: (1) general preliminary recommendations, (2) completing the application form, (3) checking and prioritising applications, (4) assessment, (5) final decision and (6) action plan design. A software was also developed to facilitate GuNFT implementation. Disinvestment should be a guided process. Accordingly, we present the first guideline for that purpose. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

American Power Act (Discussion of Draft)

EPA Pesticide Factsheets

To secure the energy future of the United States, to provide incentives for the domestic production of clean energy technology, to achieve meaningful pollution reductions, to create jobs, and for other purposes.

A proposed draft protocol for the European Convention on Biomedicine relating to research on the human embryo and fetus.

PubMed Central

Byk, J C

1997-01-01

The objective of this paper is to stimulate academic debate on embryo and fetal research from the perspective of the drafting of a protocol to the European Convention on Biomedicine. The Steering Committee on Bioethics of the Council of Europe was mandated to draw up such a protocol and for this purpose organised an important symposium on reproductive technologies and embryo research, in Strasbourg from the 16th to the 18th of December 1996. PMID:9055160

Resequencing of the common marmoset genome improves genome assemblies and gene-coding sequence analysis.

PubMed

Sato, Kengo; Kuroki, Yoko; Kumita, Wakako; Fujiyama, Asao; Toyoda, Atsushi; Kawai, Jun; Iriki, Atsushi; Sasaki, Erika; Okano, Hideyuki; Sakakibara, Yasubumi

2015-11-20

The first draft of the common marmoset (Callithrix jacchus) genome was published by the Marmoset Genome Sequencing and Analysis Consortium. The draft was based on whole-genome shotgun sequencing, and the current assembly version is Callithrix_jacches-3.2.1, but there still exist 187,214 undetermined gap regions and supercontigs and relatively short contigs that are unmapped to chromosomes in the draft genome. We performed resequencing and assembly of the genome of common marmoset by deep sequencing with high-throughput sequencing technology. Several different sequence runs using Illumina sequencing platforms were executed, and 181 Gbp of high-quality bases including mate-pairs with long insert lengths of 3, 8, 20, and 40 Kbp were obtained, that is, approximately 60× coverage. The resequencing significantly improved the MGSAC draft genome sequence. The N50 of the contigs, which is a statistical measure used to evaluate assembly quality, doubled. As a result, 51% of the contigs (total length: 299 Mbp) that were unmapped to chromosomes in the MGSAC draft were merged with chromosomal contigs, and the improved genome sequence helped to detect 5,288 new genes that are homologous to human cDNAs and the gaps in 5,187 transcripts of the Ensembl gene annotations were completely filled.

CAR: contig assembly of prokaryotic draft genomes using rearrangements.

PubMed

Lu, Chin Lung; Chen, Kun-Tze; Huang, Shih-Yuan; Chiu, Hsien-Tai

2014-11-28

Next generation sequencing technology has allowed efficient production of draft genomes for many organisms of interest. However, most draft genomes are just collections of independent contigs, whose relative positions and orientations along the genome being sequenced are unknown. Although several tools have been developed to order and orient the contigs of draft genomes, more accurate tools are still needed. In this study, we present a novel reference-based contig assembly (or scaffolding) tool, named as CAR, that can efficiently and more accurately order and orient the contigs of a prokaryotic draft genome based on a reference genome of a related organism. Given a set of contigs in multi-FASTA format and a reference genome in FASTA format, CAR can output a list of scaffolds, each of which is a set of ordered and oriented contigs. For validation, we have tested CAR on a real dataset composed of several prokaryotic genomes and also compared its performance with several other reference-based contig assembly tools. Consequently, our experimental results have shown that CAR indeed performs better than all these other reference-based contig assembly tools in terms of sensitivity, precision and genome coverage. CAR serves as an efficient tool that can more accurately order and orient the contigs of a prokaryotic draft genome based on a reference genome. The web server of CAR is freely available at http://genome.cs.nthu.edu.tw/CAR/ and its stand-alone program can also be downloaded from the same website.

78 FR 47003 - Draft National Spatial Data Infrastructure Strategic Plan; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NSDI.'' Executive Order 12906 describes the NSDI as ``the technology, policies, standards, and human resources necessary to acquire, process, store, distribute, and improve utilization of geospatial data...

Evaluation of Cryofreezer Technology through Simulation and Testing (DRAFT)

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su

2005-01-01

A cryofreezer system is being evaluated as a new method of compressing and storing carbon dioxide (CO2) in an Advanced Life Support (ALS) Environmental Control and Life Support System (ECLSS). A cryocooler is used to provide cold temperatures and heat removal while CO2 freezes and accumulates around a coldtip. The CO2 can then be stored as a liquid or high-pressure gas after it has been accumulated. This system was originally conceived as an In-Situ Resource Utilization (ISRU) application for collecting CO2 from the Mars atmosphere to be converted to methane fuel with a Sabatier reaction. In the ALS application, this system could collect CO2 from the International Space Station (ISS) Carbon Dioxide Removal Assembly (CDRA) for delivery to the Sabatier reactor. The Sabatier reaction is an important part of proposed Air Revitalization System (ARS) for ALS, and technology sharing is often possible between ISRU and ARS applications in CO2 processing systems. A prototype system developed and initially tested by Lockheed Martin Astronautics is now being evaluated in the Air Revitalization Technology Evaluation Facility (ARTEF) at NASA Johnson Space Center (JSC). This paper will discuss testing conducted through December 2004 to examine the performance and capacity of the system under a variety of input conditions. A simulation of the system was developed simultaneously using the Aspen Custom Modeler (ACM) software package. Several approaches using varying levels of detail could be used when modeling the system, and this paper will discuss the assumptions and choices made in this simulation, as well as the validity of the simulation for predicting performance of the prototype unit.

De novo genome assembly of the red silk cotton tree (Bombax ceiba).

PubMed

Gao, Yong; Wang, Haibo; Liu, Chao; Chu, Honglong; Dai, Dongqin; Song, Shengnan; Yu, Long; Han, Lihong; Fu, Yi; Tian, Bin; Tang, Lizhou

2018-05-01

Bombax ceiba L. (the red silk cotton tree) is a large deciduous tree that is distributed in tropical and sub-tropical Asia as well as northern Australia. It has great economic and ecological importance, with several applications in industry and traditional medicine in many Asian countries. To facilitate further utilization of this plant resource, we present here the draft genome sequence for B. ceiba. We assembled a relatively intact genome of B. ceiba by using PacBio single-molecule sequencing and BioNano optical mapping technologies. The final draft genome is approximately 895 Mb long, with contig and scaffold N50 sizes of 1.0 Mb and 2.06 Mb, respectively. The high-quality draft genome assembly of B. ceiba will be a valuable resource enabling further genetic improvement and more effective use of this tree species.

75 FR 42466 - Notice of Availability of Draft Environmental Impact Statement and Public Meeting for the AREVA...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... electrical transmission line required to power the proposed EREF. On March 17, 2010, the NRC granted an... facility. Specifically, AES proposes to use gas centrifuge technology to enrich the uranium-235 isotope... centrifuge-based technology to enrich the uranium- 235 isotope found in natural uranium to concentrations up...

Compendium of Authenticated Systems and Logistics Terms, Definitions and Acronyms

DTIC Science & Technology

1981-04-01

assigned for storage operations, within OTHER NON WAREHOUSE SPACE a structure designed for other than storage Space being used for storage within any...opposed to Any work done in order to correct rejected work. administrative), design (engineering design and (AFLCM1 74-2) drafting), experimental test...study. (principal or designated representative) authorized practices, methodology , or procedures involved in to request, receive, store, and account

End-effector: Joint conjugates for robotic assembly of large truss structures in space: Extended concepts

NASA Technical Reports Server (NTRS)

Brewer, W. V.; Rasis, E. P.; Shih, H. R.

1993-01-01

Results from NASA/HBCU Grant No. NAG-1-1125 are summarized. Designs developed for model fabrication, exploratory concepts drafted, interface of computer with robot and end-effector, and capability enhancement are discussed.

Temporary Laboratory Office in Huntsville Industrial Center Building

NASA Technical Reports Server (NTRS)

1964-01-01

Temporary quarters in the Huntsville Industrial Center (HIC) building located in downtown Huntsville, Alabama, as Marshall Space Flight Center (MSFC) grew. This image shows drafting specialists from the Propulsion and Vehicle Engineering Laboratory at work in the HIC building.

AIAA Survivability Technical Committee Draft

NASA Technical Reports Server (NTRS)

Shipman, Jim; Williamson, Joel

1997-01-01

A relatively new area of interest in aerospace systems survivability is the growing threat of spacecraft penetration by orbital debris. Orbital debris, or "space junk", is composed of the man-made remnants of non-functioning spacecraft still orbiting the Earth. NASA estimates that there are currently over 100,000 orbital debris particles 1 centimeter in diameter or larger that cannot be tracked by existing radar, with the population growing at approximately 4% per year in low earth orbits. With an average velocity of over 8.7 km/sec, these projectiles can penetrate and disable many vulnerable spacecraft systems. Since the likelihood of spacecraft penetration increases with spacecraft surface area, large spacecraft (such as the International Space Station) and communication satellite fleets (such as Iridium) have begun to adopt survivability enhancement strategies similar to those employed by combat aircraft. Collision avoidance maneuvers are commonly practiced by the Space Shuttle and are planned by the International Space Station to decrease their susceptibility to impact by trackable orbital debris; likewise, improved shielding, internal equipment placement, and improved crew operations following penetration can reduce the vulnerability of spacecraft to loss following orbital debris impact. Computer simulations such as the Manned Spacecraft and Crew Survivability (MSCSurv) program at the NASA-Marshall Space Flight Center have recently been developed to quantify and reduce the likelihood of crew or spacecraft loss following orbital debris penetration. The AIAA Survivability Technical Committee is working to enable the transfer of military-developed survivability technologies to help the aerospace industry cope with this growing threat.

Space and Naval Warfare Systems Command and Overall Navy Needs to Improve Management of Waiver and Deferral Requests

DTIC Science & Technology

2015-10-08

Management of Waiver and Deferral Requests Visit us at www.dodig.mil Objective Our objective for this audit was to evaluate the Space and Naval Warfare...We conducted this audit in accordance with generally accepted government auditing standards. We considered management comments on a draft of...OFFICIAL USE ON Y Introduction DODIG-2016-003 │ 1 Introduction Objective Our objective for this audit was to evaluate the Space and Naval Warfare

Toward the MIL-STD and MIL-HDBK for Project Support Environment Interfaces

DTIC Science & Technology

1992-11-01

acquisition and budget process in the past has taken a long time to field new standard computers, so long that the produced technology is often old...compared to commercial technology . The obvious logistics benefits associated with standard hardware are offset by the inability to field current... technology area. The Standard and Handbook Writing Team is tasked with actually writing the draft military standard and handbook. 3. PSESWG STANDARD The

75 FR 14206 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... commercial nuclear power plants (NPPs), electric power companies, and any person eligible under the Atomic... or other forms of information technology? A copy of the draft supporting statement may be viewed free...

78 FR 72873 - Availability of 2014-2018 Draft Strategic Plan and Request for Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... energy, environmental, and nuclear security of the United States; promoting scientific and technological innovation in support of that mission; sponsoring basic research in the physical sciences; [[Page 72874

76 FR 10574 - Notice of Availability of the Draft Environmental Impact Statement for the Disposal of Greater...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... power systems in support of space exploration and national security; and the environmental cleanup of... and industrial equipment and exploration of geologic formations for oil and gas. They are located in...

Acting on Lessons Learned: A NASA Glenn Acoustics Branch Perspective

NASA Technical Reports Server (NTRS)

Koch, L. Danielle

2008-01-01

Lessons learned from the International Space Station have indicated that early attention to acoustics will be key to achieving safer, more productive environments for new long duration missions. Fans are known to be dominant noise sources, and reducing fan noise poses challenges for fan manufacturers and systems engineers. The NASA Glenn Acoustics Branch has considered ways in which expertise and capabilities traditionally used to understand and mitigate aircraft engine noise can be used to address small fan noise issues in Exploration and Information Technology applications. Many could benefit if NASA can capture what is known about small fan aero and acoustic performance in a "Guide for the Design, Selection, and Installation of Fans for Spaceflight Applications." A draft outline for this document will be offered as a useful starting point for brainstorming ideas for the various smaller, near-term research projects that would need to be addressed first.

Guideline series: Control of volatile organic compound emissions from wood furniture manufacturing operations. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

This draft Control Techniques Guidelines (CTG) provides necessary guidance for development of regulations to limit emissions of volatile organic compounds (VOC`s) from wood furniture finishing and cleaning operations. This guidance includes emission limits for specific wood furniture finishing steps and work pratices to reduce waste and evaporation through pollution prevention methods; these represent reasonably available control technology for wood furniture finishing and cleaning operations. This document is intended to provide State and local air pollution authorities with an information base for proceeding with their own analyses of RACT to meet statutory requirements.

NANOTECHNOLOGY WHITE PAPER | Science Inventory | US ...

EPA Pesticide Factsheets

Nanotechnology is the science of manipulating materials at the atomic and molecular level to develop new or enhanced materials and products. In December 2004, EPA’s Science Policy Council created a cross-Agency workgroup to identify and describe the issues EPA must address to ensure protection of human health and the environment as this new technology is developed. The draft white paper on nanotechnology is the product of the workgroup. The draft white paper describes the technology, and provides a discussion of the potential environmental benefits of nanotechnology and its applications that can foster sustainable use of resources. Risk management issues and the Agency’s statutory mandates are outlined, followed by an extensive discussion of risk assessment issues. The paper identifies research needs for both environmental applications and implications of nanotechnology and concludes with recommendations on next steps for addressing science policy issues and research needs. Supplemental information is provided in a number of appendices. The Agency will use the white paper to address research needs and risk assessment issues concerning nanotechnology. The draft white paper will undergo independent expert review, which will be conducted in the February time frame. All public comments received by January 31, 2006 will be submitted to the external review panel for their consideration. Comments received beyond that time will be considered by EPA. Follo

The draft genome of MD-2 pineapple using hybrid error correction of long reads

PubMed Central

Redwan, Raimi M.; Saidin, Akzam; Kumar, S. Vijay

2016-01-01

The introduction of the elite pineapple variety, MD-2, has caused a significant market shift in the pineapple industry. Better productivity, overall increased in fruit quality and taste, resilience to chilled storage and resistance to internal browning are among the key advantages of the MD-2 as compared with its previous predecessor, the Smooth Cayenne. Here, we present the genome sequence of the MD-2 pineapple (Ananas comosus (L.) Merr.) by using the hybrid sequencing technology from two highly reputable platforms, i.e. the PacBio long sequencing reads and the accurate Illumina short reads. Our draft genome achieved 99.6% genome coverage with 27,017 predicted protein-coding genes while 45.21% of the genome was identified as repetitive elements. Furthermore, differential expression of ripening RNASeq library of pineapple fruits revealed ethylene-related transcripts, believed to be involved in regulating the process of non-climacteric pineapple fruit ripening. The MD-2 pineapple draft genome serves as an example of how a complex heterozygous genome is amenable to whole genome sequencing by using a hybrid technology that is both economical and accurate. The genome will make genomic applications more feasible as a medium to understand complex biological processes specific to pineapple. PMID:27374615

THE MAN MADE WORLD, A HIGH SCHOOL COURSE ON THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

THIS STUDENTS' MANUAL FOR THE ENGINEERING CONCEPTS CURRICULUM PROJECT'S (ECCP) HIGH SCHOOL COURSE, "THE MAN MADE WORLD," IS THE THIRD DRAFT OF THE EXPERIMENTAL VERSION. THE MATERIAL WRITTEN BY SCIENTISTS, ENGINEERS, AND EDUCATORS, EMPHASIZES THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION. RESOURCES OF THE MAN-MADE…

Medical technologies in developing countries: a feasibility study on the maintenance of medical equipment in Ethiopia.

PubMed

Bracale, M; Pepino, A

1994-03-01

The authors report the results of a feasibility study, sponsored by the Italian Foreign Ministry, of setting up a Regional Centre for the Management and Maintenance of Medical Technologies in Ethiopia. After some general considerations regarding the problems of co-operation in this field, the authors draft some concrete proposals for an operative programme.

Systems Security Engineering

DTIC Science & Technology

2010-08-22

practice for information security management ( ISO /IEC 27002 ),” “Information technology — Security techniques — Information security management...systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security techniques — Information security risk management ( ISO /IEC 27005).” from...associated practice aids. Perhaps the most germane discovery from this effort was a draft ISO standard on Systems and software engineering, Systems and

ED20. Crisis or Opportunity? Earth and Space Science Education at the State and National Levels

NASA Astrophysics Data System (ADS)

Brett, J. M.

2011-12-01

Scientists and researchers, those often in oversight positions and often control of the purse strings, have historically not been kind to the Earth Systems Science (ESS) discipline. This is puzzling to those of us who are ESS educators because we know that to appreciate how our planet works it is necessary to integrate and apply all the disciplines of science. With our amazing technologies and the increasing demands of a growing population we are dramatically changing our home planet. Perhaps a crisis? As the last century ended we found ESS in the same minor league position it was in when the 20th Century started. During the review period of what was to become the National Science Education Standards (NSES) draft after draft, no matter what color the cover was, seemed to ignore, omit, or severely limit ESS topics in meteorology and oceanography. Once published the NSES became the basis for the science standards in many states with what many said were critical gaps. In the years following 1996 different groups have worked to correct the omissions they found by developing guides...Ocean Literacy: Essential Principles of Ocean Science K-12 and Climate Literacy: The Essential Principals of Climate Science. An observer on the side might have considered each effort one of lobbying to get attention, funding and materials. Each effort was clearly interested in making an impact where it mattered...in the classroom. Now our Opportunity! The NAS process for developing "A Framework for K-12 Science Education" presented ESS educators with a real opportunity and we can proudly say we made our voices heard. And while there is great enthusiasm for the framework and the Chapter 7 Earth and Space we face critically important work to bring real Earth Space Science Education into the K-12 classroom. The possibility of the standards to be developed from the Framework becoming Common Core for the majority of states following the course of ELA and mathematics requires that those who previously guarded their territory collaborate.

Beyond Airmindedness: Managing Regional Affairs Strategists for Joint Strategic Effect

DTIC Science & Technology

2017-06-01

FORCE A THESIS PRESENTED TO THE FACULTY OF THE SCHOOL OF ADVANCED AIR AND SPACE STUDIES FOR COMPLETION OF GRADUATION REQUIREMENTS SCHOOL OF...Strategy and Security Studies at the School of Advanced Air and Space Studies, for his review of the final draft and suggestions for improvement...Our forces must have the ability to effectively communicate with and understand the cultures of coalition forces, international partners, and local

IVHS: Potential Impact On Disadvantaged Communities, IVHS Draft

DOT National Transportation Integrated Search

1994-06-01

THIS PAPER EXPLORES THE IMPACT OF TRANSPORTATION TECHNOLOGIES ON THE SOCIAL AND ECONOMIC WELL-BEING OF CENTRAL CITY RESIDENTS AND DISADVANTAGED POPULATIONS. THOUGH MEMBERS OF POOR COMMUNITIES HAVE LITTLE POLITICAL POWER OR INPUT INTO THE DECISION-MAK...

Industrial Education Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This handbook contains a competency-based curriculum for teaching industrial education in Alaska. Competencies are listed for the following areas: employability, auto maintenance, building maintenance, commercial fishing, communications, construction, drafting, electronics, energy and power, forestry and logging, graphics, high technology,…

ABACAS: algorithm-based automatic contiguation of assembled sequences

PubMed Central

Assefa, Samuel; Keane, Thomas M.; Otto, Thomas D.; Newbold, Chris; Berriman, Matthew

2009-01-01

Summary: Due to the availability of new sequencing technologies, we are now increasingly interested in sequencing closely related strains of existing finished genomes. Recently a number of de novo and mapping-based assemblers have been developed to produce high quality draft genomes from new sequencing technology reads. New tools are necessary to take contigs from a draft assembly through to a fully contiguated genome sequence. ABACAS is intended as a tool to rapidly contiguate (align, order, orientate), visualize and design primers to close gaps on shotgun assembled contigs based on a reference sequence. The input to ABACAS is a set of contigs which will be aligned to the reference genome, ordered and orientated, visualized in the ACT comparative browser, and optimal primer sequences are automatically generated. Availability and Implementation: ABACAS is implemented in Perl and is freely available for download from http://abacas.sourceforge.net Contact: sa4@sanger.ac.uk PMID:19497936

Receiver design, performance analysis, and evaluation for space-borne laser altimeters and space-to-space laser ranging systems

NASA Technical Reports Server (NTRS)

Davidson, Frederic M.; Sun, Xiaoli; Field, Christopher T.

1995-01-01

This Interim report consists of a manuscript, 'Receiver Design for Satellite to Satellite Laser Ranging Instrument,' and copies of two papers we co-authored, 'Demonstration of High Sensitivity Laser Ranging System' and 'Semiconductor Laser-Based Ranging Instrument for Earth Gravity Measurements. ' These two papers were presented at the conference Semiconductor Lasers, Advanced Devices and Applications, August 21 -23, 1995, Keystone Colorado. The manuscript is a draft in the preparation for publication, which summarizes the theory we developed on space-borne laser ranging instrument for gravity measurements.

Application of USNRC NUREG/CR-6661 and draft DG-1108 to evolutionary and advanced reactor designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang 'Apollo', Chen

2006-07-01

For the seismic design of evolutionary and advanced nuclear reactor power plants, there are definite financial advantages in the application of USNRC NUREG/CR-6661 and draft Regulatory Guide DG-1108. NUREG/CR-6661, 'Benchmark Program for the Evaluation of Methods to Analyze Non-Classically Damped Coupled Systems', was by Brookhaven National Laboratory (BNL) for the USNRC, and Draft Regulatory Guide DG-1108 is the proposed revision to the current Regulatory Guide (RG) 1.92, Revision 1, 'Combining Modal Responses and Spatial Components in Seismic Response Analysis'. The draft Regulatory Guide DG-1108 is available at http://members.cox.net/apolloconsulting, which also provides a link to the USNRC ADAMS site to searchmore » for NUREG/CR-6661 in text file or image file. The draft Regulatory Guide DG-1108 removes unnecessary conservatism in the modal combinations for closely spaced modes in seismic response spectrum analysis. Its application will be very helpful in coupled seismic analysis for structures and heavy equipment to reduce seismic responses and in piping system seismic design. In the NUREG/CR-6661 benchmark program, which investigated coupled seismic analysis of structures and equipment or piping systems with different damping values, three of the four participants applied the complex mode solution method to handle different damping values for structures, equipment, and piping systems. The fourth participant applied the classical normal mode method with equivalent weighted damping values to handle differences in structural, equipment, and piping system damping values. Coupled analysis will reduce the equipment responses when equipment, or piping system and structure are in or close to resonance. However, this reduction in responses occurs only if the realistic DG-1108 modal response combination method is applied, because closely spaced modes will be produced when structure and equipment or piping systems are in or close to resonance. Otherwise, the conservatism in the current Regulatory Guide 1.92, Revision 1, will overshadow the advantage of coupled analysis. All four participants applied the realistic modal combination method of DG-1108. Consequently, more realistic and reduced responses were obtained. (authors)« less

The pressure ridge distribution in the Arctic Ocean from submarine sonar data

NASA Astrophysics Data System (ADS)

Rodrigues, Joao; Wadhams, Peter

2010-05-01

The profiling of the underside of the sea ice with upward-looking sonars fitted to submarines is the best method of studying the large scale distribution of morphological features such as pressure ridges and leads. We present the statistical analysis of the distributions of pressure ridge spacings and heights, and lead spacings and widths observed during two Arctic cruises by the Royal Navy submarine HMS Tireless in the winters of 2004 and 2007 in which more than 10000km of sea ice draft data were collected. We briefly describe the main characteristics of the full ice draft distribution in the several regions of the Arctic Ocean visited by the submarine and discuss the most significant differences between 2004 and 2007. In the area of heavily ridged ice north of Greenland and Ellesmere Island we found an increase in ridge density (number of ridges per unit track length) accompanied by a decrease in modal ice draft, leaving the mean ice thickness essentially unchanged, between 2004 and 2007. This area is likely to be the only one in the Arctic Ocean where the sea ice thickness may not be in decline. We investigate the causes of this invariance in the context of an Arctic Ocean in transition from a multi-year to a first-year ice cover and discuss its relation with the strengthening of the transpolar drift and consequent accumulation of ice north of Greenland and increase in ice export through Fram Strait. Our analysis shows that the number of deep ridges per km is well described by a Poisson distribution while the corresponding distribution for shallow ridges is more complicated. The tail of the distribution of the pressure ridge heights is approximately a negative exponential, in agreement with similar observations made in previous cruises. We pay special attention to the uncertainties and biases in the measurement of the ice draft. Specifically, we discuss the effects of the finite beamwidth of the single-beam sonars traditionally used in British submarines on the determination of sea ice draft, which may have been underestimated in previous work.

46 CFR 61.20-3 - Main and auxiliary machinery and associated equipment, including fluid control systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... control for the means of stopping machinery driving forced and induced draft fans, fuel oil transfer pumps, fuel oil unit pumps, and fans in the ventilation systems serving machinery and cargo spaces shall be...

Audit of a Scientific Data Center for Certification as a Trustworthy Digital Repository: A Case Study

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2011-12-01

Services that preserve and enable future access to scientific data are necessary to ensure that the data that are being collected today will be available for use by future generations of scientists. Many data centers, archives, and other digital repositories are working to improve their ability to serve as long-term stewards of scientific data. Trust in sustainable data management and preservation capabilities of digital repositories can influence decisions to use these services to deposit or obtain scientific data. Building on the Open Archival Information System (OAIS) Reference Model developed by the Consultative Committee for Space Data Systems (CCSDS) and adopted by the International Organization for Standardization as ISO 14721:2003, new standards are being developed to improve long-term data management processes and documentation. The Draft Information Standard ISO/DIS 16363, "Space data and information transfer systems - Audit and certification of trustworthy digital repositories" offers the potential to evaluate digital repositories objectively in terms of their trustworthiness as long-term stewards of digital resources. In conjunction with this, the CCSDS and ISO are developing another draft standard for the auditing and certification process, ISO/DIS 16919, "Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trustworthy digital repositories". Six test audits were conducted of scientific data centers and archives in Europe and the United States to test the use of these draft standards and identify potential improvements for the standards and for the participating digital repositories. We present a case study of the test audit conducted on the NASA Socioeconomic Data and Applications Center (SEDAC) and describe the preparation, the audit process, recommendations received, and next steps to obtain certification as a trustworthy digital repository, after approval of the ISO/DIS standards.

Data Relay Board with Protocol for High-Speed, Free-Space Optical Communications

NASA Technical Reports Server (NTRS)

Wright, Malcolm; Clare, Loren; Gould, Gary; Pedyash, Maxim

2004-01-01

In a free-space optical communication system, the mitigation of transient outages through the incorporation of error-control methods is of particular concern, the outages being caused by scintillation fades and obscurants. The focus of this innovative technology is the development of a data relay system for a reliable high-data-rate free-spacebased optical-transport network. The data relay boards will establish the link, maintain synchronous connection, group the data into frames, and provide for automatic retransmission (ARQ) of lost or erred frames. A certain Quality of Service (QoS) can then be ensured, compatible with the required data rate. The protocol to be used by the data relay system is based on the draft CCSDS standard data-link protocol Proximity-1, selected by orbiters to multiple lander assets in the Mars network, for example. In addition to providing data-link protocol capabilities for the free-space optical link and buffering the data, the data relay system will interface directly with user applications over Gigabit Ethernet and/or with highspeed storage resources via Fibre Channel. The hardware implementation is built on a network-processor-based architecture. This technology combines the power of a hardware switch capable of data switching and packet routing at Gbps rates, with the flexibility of a software- driven processor that can host highly adaptive and reconfigurable protocols used, for example, in wireless local-area networks (LANs). The system will be implemented in a modular multi-board fashion. The main hardware elements of the data relay system are the new data relay board developed by Rockwell Scientific, a COTS Gigabit Ethernet board for user interface, and a COTS Fibre Channel board that connects to local storage. The boards reside in a cPCI back plane, and can be housed in a VME-type enclosure.

Draft material : enhanced freight movement at domestic and international gateways

DOT National Transportation Integrated Search

1997-07-01

The purpose of this report is to provide a framework for integrating the core program activities that constitute the National Science and Technology Councils (NSTCs) public-private initiative to improve freight movement at domestic and internat...

75 FR 48996 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

..., doses to an embryo/fetus or nursing child, or leaking sources are reportable on occurrence. A certifying... information technology? A copy of the draft supporting statement may be viewed free of charge at the NRC...

Fuel Cell Transit Bus Coordination and Evaluation Plan California Fuel Cell Transit Evaluation Team, DRAFT

DOT National Transportation Integrated Search

2003-10-29

The objective of the DOE/NREL evaluation program is to provide comprehensive, unbiased evaluation results of advanced technology vehicle development and operations, evaluation of hydrogen infrastructure development and operation, and descriptions of ...

Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

NASA Technical Reports Server (NTRS)

Carl, John G.

1973-01-01

This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

GPS Spectrum Management (Briefing Charts)

DTIC Science & Technology

2015-04-29

15) agenda item (AI) 1.1 draft conference preparatory meeting ( CPM ); proactively keeping possible mobile broadband allocations away from GPS in-band...UNCLASSIFIED/APPROVED FOR PUBLIC RELEASE ITU Watch Items SPACE AND MISSILE SYSTEMS CENTER • WRC-15 AI 1.1 -mobile broadband; finalization of CPM in Mar

A Survey of CAD/CAM Technology Applications in the U.S. Shipbuilding Industry

DTIC Science & Technology

1984-01-01

operation for drafting. Computer Aided Engineering (CAE) analysis is used primarily to determine the validity of design characteristics and produc- tion...include time standard generation, sea trial analysis , and group Systems integration While no systems surveyed Aided Design (CAD) is the technology... analysis . is the largest problem involving software packages. are truly integrated, many are interfaced. Computer most interfaced category with links

Molten Boron Phase-Change Thermal Energy Storage: Containment and Applicability to Microsatellites (Draft)

DTIC Science & Technology

2011-06-01

technologies, including high temperature thermal insulation and thermal to electric power conversion, have been evaluated, and a preliminary design...support technologies, including high temperature thermal insulation and thermal to electric power conversion, have been evaluated, and a preliminary...vacuum gap with low emissivity surfaces on either side as the first insulating layer.11 D. Electrical Energy Conversion There are a wide variety

Atmospheric considerations regarding the impact of heat dissipation from a nuclear energy center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rotty, R.M.; Bauman, H.; Bennett, L.L.

1976-05-01

Potential changes in climate resulting from a large nuclear energy center are discussed. On a global scale, no noticeable changes are likely, but on both a regional and a local scale, changes can be expected. Depending on the cooling system employed, the amount of fog may increase, the amount and distribution of precipitation will change, and the frequency or location of severe storms may change. Very large heat releases over small surface areas can result in greater atmospheric instability; a large number of closely spaced natural-draft cooling towers have this disadvantage. On the other hand, employment of natural-draft towers makesmore » an increase in the occurrence of ground fog unlikely. The analysis suggests that the cooling towers for a large nuclear energy center should be located in clusters of four with at least 2.5-mile spacing between the clusters. This is equivalent to the requirement of one acre of land surface per each two megawatts of heat being rejected.« less

Buying a Shuttle ticket

NASA Technical Reports Server (NTRS)

Moore, W. F.; Forsythe, C.

1977-01-01

A preliminary draft policy for reimbursement for Space Shuttle flights has been developed by NASA in the form of pricing criteria for Space Transportation System (STS) users in domestic and foreign government and industry. The reimbursement policy, the transition from expendable launch vehicles to STS, the new user services, and the interaction of the economics of new user services and STS cost to fly are discussed in the present paper. Current efforts to develop new users are noted.

Surveying Florida MPO readiness to incorporate innovative technologies into long range transportation plans : draft final report.

DOT National Transportation Integrated Search

2016-08-01

There is optimism that Automated Vehicles (AVs) can improve the safety of the transportation system, : reduce congestion, increase reliability, offer improved mobility solutions to all segments of the population : including the transportation-disadva...

78 FR 63464 - Notice of Extension of the Public Comment Period on the Draft Toxicological Review of Benzo[a...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... substances; this information is then used to support risk management decisions designed to protect public... American Railroads, and the Pavement Coatings Technology Council. The EPA believes this extension will...

Technician Program Uses Advanced Instruments.

ERIC Educational Resources Information Center

Stinson, Stephen

1981-01-01

Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

77 FR 52365 - Notice of Availability of the Draft Environmental Impact Statement for the Arkansas Valley...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Pueblo Reservoir during emergencies or periodic maintenance activities. Interconnect operations would... available space in Pueblo Reservoir would deliver high quality water that would meet Environmental... contract with Southeastern Colorado Water Conservancy District to store water in Pueblo Reservoir. While...

Draft Environmental Impact Statement. Space Shuttle Advanced Solid Rocket Motor Program

DTIC Science & Technology

1988-12-01

NTEMA ~Z INDSTRIA RECRETIONA ___ __ __ __ __ ___ __ __ __ __ __ _ __ _ ___ __ __ __ __Dat: ec mbr 988 EB SC S RVCES\\ PARK R TE 4-X Adjacent to the...some areas of submerged marsh, with differing soils developing in the high and low portions. The predominant soils are Pomello sand on the ridges

Scientific experiments on the flight of the 1979 biological satellite, draft plan

NASA Technical Reports Server (NTRS)

1979-01-01

The various physiological, biological, radiobiological, and radiation physics experiments to be conducted onboard the 1979 biological satellite are described. These experiments deal with the effects of space flight on living organisms, measurement of radiation, and possible methods of shielding spacecraft against such radiation.

A concept of a space hazard counteraction system: Astronomical aspects

NASA Astrophysics Data System (ADS)

Shustov, B. M.; Rykhlova, L. V.; Kuleshov, Yu. P.; Dubov, Yu. N.; Elkin, K. S.; Veniaminov, S. S.; Borovin, G. K.; Molotov, I. E.; Naroenkov, S. A.; Barabanov, S. I.; Emel'yanenko, V. V.; Devyatkin, A. V.; Medvedev, Yu. D.; Shor, V. A.; Kholshevnikov, K. V.

2013-07-01

The basic science of astronomy and, primarily, its branch responsible for studying the Solar System, face the most important practical task posed by nature and the development of human civilization—to study space hazards and to seek methods of counteracting them. In pursuance of the joint Resolution of the Federal Space Agency (Roscosmos) and the RAS (Russian Academy of Sciences) Space Council of June 23, 2010, the RAS Institute of Astronomy in collaboration with other scientific and industrial organizations prepared a draft concept of the federal-level program targeted at creating a system of space hazard detection and counteraction. The main ideas and astronomical content of the concept are considered in this article.

A Space Data System Standard for Telerobotic Operations

NASA Technical Reports Server (NTRS)

Mittman, David S.; Martinez, Lindolfo

2014-01-01

The Telerobotics Working Group of the Mission Operations and Information Management Services Area of the Consultative Committee for Space Data Systems is drafting a document that will help bound the scope of an eventual international standard for telerobotic operations services. This paper will present the work in progress and provide background for how the international community is beginning to define standards in telerobotic operations that will help ensure the success of complex missions to explore beyond Earth orbit.

MECHANICAL DRAFTING AND DESIGN TECHNOLOGY, JOB DESCRIPTIONS AND SUGGESTED TECHNIQUES FOR DETERMINING COURSES OF STUDY IN VOCATIONAL EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

PETERSON, CLARENCE E.

THIS IS THE FIRST OF A SERIES DESIGNED TO PROVIDE AID TO STATES IN ORGANIZING AND OPERATING PROGRAMS UNDER TITLE VIII OF THE NATIONAL DEFENSE EDUCATION ACT, PUBLIC LAW 85-864. IT FURNISHES--(1) GENERAL INFORMATION ABOUT A TECHNOLOGY OR BROAD FIELD OF WORK, (2) COMPOSITE JOB DESCRIPTIONS OF REPRESENTATIVE OCCUPATIONS IN THAT FIELD OF WORK, (3) A…

Services and the National Information Infrastructure. Report of the Information Infrastructure Task Force Committee on Applications and Technology, Technology Policy Working Group. Draft for Public Comment.

ERIC Educational Resources Information Center

Office of Science and Technology Policy, Washington, DC.

In this report, the National Information Infrastructure (NII) services issue is addressed, and activities to advance the development of NII services are recommended. The NII is envisioned to grow into a seamless web of communications networks, computers, databases, and consumer electronics that will put vast amounts of information at users'…

New Technology Drafts: Production and Improvements

ScienceCinema

Lapidus, Alla

2018-01-22

Alla Lapidus, head of the DOE Joint Genome Institute's Finishing group, gives a talk on how the DOE JGI's microbial genome sequencing pipeline has been adapted to accommodate next generation sequencing platforms at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers these occupations: manufacturing technician, computer-assisted design and drafting (CADD) technician, quality technician, and mechanical technician. Section 1 provides occupation definitions. Section 2 lists development committee members. Section 3 provides the leveling codes---abbreviations for grade level…

Data Model as an Architectural View

DTIC Science & Technology

2009-10-01

store order - processing system. Logical. The logical data model is an evolution of the conceptual data model towards a data management technology (e.g...online store order - processing system at different stages. Perhaps the first draft was elaborated by the architect during discussion of requirements

75 FR 32535 - ITS Joint Program Office; IntelliDriveSM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; IntelliDrive\\SM\\ Deployment Scenarios Workshop; Notice of Workshop AGENCY: Research and Innovative Technology Administration, Department of... participants to identify advantages and disadvantages of each of the draft scenarios and critical policy and...

Best Practice Guidelines for Computer Technology in the Montessori Early Childhood Classroom.

ERIC Educational Resources Information Center

Montminy, Peter

1999-01-01

Presents a draft for a principle-centered position statement of a Montessori early childhood program in central Pennsylvania, on the pros and cons of computer use in a Montessori 3-6 classroom. Includes computer software rating form. (Author/KB)

Utility of Social Modeling for Proliferation Assessment - Preliminary Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coles, Garill A.; Gastelum, Zoe N.; Brothers, Alan J.

2009-06-01

This Preliminary Assessment draft report will present the results of a literature search and preliminary assessment of the body of research, analysis methods, models and data deemed to be relevant to the Utility of Social Modeling for Proliferation Assessment research. This report will provide: 1) a description of the problem space and the kinds of information pertinent to the problem space, 2) a discussion of key relevant or representative literature, 3) a discussion of models and modeling approaches judged to be potentially useful to the research, and 4) the next steps of this research that will be pursued based onmore » this preliminary assessment. This draft report represents a technical deliverable for the NA-22 Simulations, Algorithms, and Modeling (SAM) program. Specifically this draft report is the Task 1 deliverable for project PL09-UtilSocial-PD06, Utility of Social Modeling for Proliferation Assessment. This project investigates non-traditional use of social and cultural information to improve nuclear proliferation assessment, including nonproliferation assessment, proliferation resistance assessments, safeguards assessments and other related studies. These assessments often use and create technical information about the State’s posture towards proliferation, the vulnerability of a nuclear energy system to an undesired event, and the effectiveness of safeguards. This project will find and fuse social and technical information by explicitly considering the role of cultural, social and behavioral factors relevant to proliferation. The aim of this research is to describe and demonstrate if and how social science modeling has utility in proliferation assessment.« less

48 CFR 1852.217-72 - Phased acquisition using progressive competition down-selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND... Phase 2 proposals, including the final evaluation criteria and factors, will be provided at that time... award. (g) The following draft Phase 2 evaluation factors are provided for your information. Please note...

Space Law and China

NASA Astrophysics Data System (ADS)

Tronchetti, Fabio

2017-08-01

Over the past few years, China has made remarkable achievements in the space sector and become one of the most relevant players in the outer space domain. Highlights of this process have been the deployment in orbit of the first Chinese space station, Tiangong-1, on September 29, 2011; and the landing of the Yutu rover on the lunar surface on December 14, 2013. While technological developments have occurred at such a rapid pace, the same cannot be said of the regulatory framework governing Chinese space activities, which still lays at its infant stage. Indeed, unlike other major space-faring countries, China lacks comprehensive and uniform national space legislation; as of now, China has enacted two low-level administrative regulations addressing the issues of launching and registration of space objects. With the growth of the Chinese space program, such a lack of a structured national space law is beginning to show its limits and to create concerns about its negative impact on business opportunities and the ability of China to fully comply with international obligations. One should keep in mind that the international space treaties (China is part to four international space law treaties) are not self-executing, thus requiring States to adopt domestic measures to ensure their effective implementation. Importantly, Chinese authorities appear to be aware of these issues; as stated by the secretary-general of the Chinese National Space Administration (CNSA) in 2014, national space law has been listed in the national legislation plan and the CNSA is directly engaged in such a process. However, questions remain as to how this drafting process will be conducted and what legal form and content the law will have. For example, China could either decide to proceed with a gradual approach, consisting in the adoption of laws addressing selected issues to be eventually assembled into one single law; or to directly move to the adoption of one comprehensive law. In any case, if enacted, a Chinese national space law would represent an important step in the advancement of the Chinese space program and in the progress of international space law as such.

The International Safety Framework for nuclear power source applications in outer space-Useful and substantial guidance

NASA Astrophysics Data System (ADS)

Summerer, L.; Wilcox, R. E.; Bechtel, R.; Harbison, S.

2015-06-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space was adopted, following a multi-year process that involved all major space faring nations under the auspices of a partnership between the UN Committee on the Peaceful Uses of Outer Space and the International Atomic Energy Agency. The Safety Framework reflects an international consensus on best practices to achieve safety. Following the 1992 UN Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second attempt by the international community to draft guidance promoting the safety of applications of nuclear power sources in space missions. NPS applications in space have unique safety considerations compared with terrestrial applications. Mission launch and outer space operational requirements impose size, mass and other space environment limitations not present for many terrestrial nuclear facilities. Potential accident conditions could expose nuclear power sources to extreme physical conditions. The Safety Framework is structured to provide guidance for both the programmatic and technical aspects of safety. In addition to sections containing specific guidance for governments and for management, it contains technical guidance pertinent to the design, development and all mission phases of space NPS applications. All sections of the Safety Framework contain elements directly relevant to engineers and space mission designers for missions involving space nuclear power sources. The challenge for organisations and engineers involved in the design and development processes of space nuclear power sources and applications is to implement the guidance provided in the Safety Framework by integrating it into the existing standard space mission infrastructure of design, development and operational requirements, practices and processes. This adds complexity to the standard space mission and launch approval processes. The Safety Framework is deliberately generic to remain relevantly independent of technological progress, of national organisational setups and of space mission types. Implementing its guidance therefore leaves room for interpretation and adaptation. Relying on reported practices, we analyse the guidance particularly relevant to engineers and space mission designers.

SUPERFUND TREATABILITY CLEARINGHOUSE: BDAT FOR SOLIDIFICATION/STABILIZATION TECHNOLOGY FOR SUPERFUND SOILS (DRAFT FINAL REPORT)

EPA Science Inventory

This report evaluates the performance of solidification as a method for treating solids from Superfund sites. Tests were conducted on four different artificially contaminated soils which are representative of soils found at the sites. Contaminated soils were solidified us...

Evaluation Strategy. Paper Preservation Systems.

ERIC Educational Resources Information Center

FMC Corp., Gastonia, NC. Lithium Div.

After a decade of slow but steady progress, the pace of development of technologies to deacidify and strengthen deteriorating books and documents has quickened significantly. These developments accentuate the need for the conservation community to scientifically evaluate the technical merits of potential processes. This draft evaluation strategy…

Connected Vehicle Pilot Deployment Program phase 1 : partnership status summary : ICF/Wyoming : draft report.

DOT National Transportation Integrated Search

2016-08-12

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Ethical considerations of research policy for personal genome analysis: the approach of the Genome Science Project in Japan.

PubMed

Minari, Jusaku; Shirai, Tetsuya; Kato, Kazuto

2014-12-01

As evidenced by high-throughput sequencers, genomic technologies have recently undergone radical advances. These technologies enable comprehensive sequencing of personal genomes considerably more efficiently and less expensively than heretofore. These developments present a challenge to the conventional framework of biomedical ethics; under these changing circumstances, each research project has to develop a pragmatic research policy. Based on the experience with a new large-scale project-the Genome Science Project-this article presents a novel approach to conducting a specific policy for personal genome research in the Japanese context. In creating an original informed-consent form template for the project, we present a two-tiered process: making the draft of the template following an analysis of national and international policies; refining the draft template in conjunction with genome project researchers for practical application. Through practical use of the template, we have gained valuable experience in addressing challenges in the ethical review process, such as the importance of sharing details of the latest developments in genomics with members of research ethics committees. We discuss certain limitations of the conventional concept of informed consent and its governance system and suggest the potential of an alternative process using information technology.

Draft Site Treatment Plan (DSTP), Volumes I and II

DOE Office of Scientific and Technical Information (OSTI.GOV)

D`Amelio, J.

1994-08-30

Site Treatment Plans (STP) are required for facilities at which the DOE generates or stores mixed waste. This Draft Site Treatment Plan (DSTP) the second step in a three-phase process, identifies the currently preferred options for treating mixed waste at the Savannah River Site (SRS) or for developing treatment technologies where technologies do not exist or need modification. The DSTP reflects site-specific preferred options, developed with the state`s input and based on existing available information. To the extent possible, the DSTP identifies specific treatment facilities for treating the mixed waste and proposes schedules. Where the selection of specific treatment facilitiesmore » is not possible, schedules for alternative activities such as waste characterization and technology assessment are provided. All schedule and cost information presented is preliminary and is subject to change. The DSTP is comprised of two volumes: this Compliance Plan Volume and the Background Volume. This Compliance Plan Volume proposes overall schedules with target dates for achieving compliance with the land disposal restrictions (LDR) of RCRA and procedures for converting the target dates into milestones to be enforced under the Order. The more detailed discussion of the options contained in the Background Volume is provided for informational purposes only.« less

Human genetics and genomics a decade after the release of the draft sequence of the human genome.

PubMed

Naidoo, Nasheen; Pawitan, Yudi; Soong, Richie; Cooper, David N; Ku, Chee-Seng

2011-10-01

Substantial progress has been made in human genetics and genomics research over the past ten years since the publication of the draft sequence of the human genome in 2001. Findings emanating directly from the Human Genome Project, together with those from follow-on studies, have had an enormous impact on our understanding of the architecture and function of the human genome. Major developments have been made in cataloguing genetic variation, the International HapMap Project, and with respect to advances in genotyping technologies. These developments are vital for the emergence of genome-wide association studies in the investigation of complex diseases and traits. In parallel, the advent of high-throughput sequencing technologies has ushered in the 'personal genome sequencing' era for both normal and cancer genomes, and made possible large-scale genome sequencing studies such as the 1000 Genomes Project and the International Cancer Genome Consortium. The high-throughput sequencing and sequence-capture technologies are also providing new opportunities to study Mendelian disorders through exome sequencing and whole-genome sequencing. This paper reviews these major developments in human genetics and genomics over the past decade.

Human genetics and genomics a decade after the release of the draft sequence of the human genome

PubMed Central

2011-01-01

Substantial progress has been made in human genetics and genomics research over the past ten years since the publication of the draft sequence of the human genome in 2001. Findings emanating directly from the Human Genome Project, together with those from follow-on studies, have had an enormous impact on our understanding of the architecture and function of the human genome. Major developments have been made in cataloguing genetic variation, the International HapMap Project, and with respect to advances in genotyping technologies. These developments are vital for the emergence of genome-wide association studies in the investigation of complex diseases and traits. In parallel, the advent of high-throughput sequencing technologies has ushered in the 'personal genome sequencing' era for both normal and cancer genomes, and made possible large-scale genome sequencing studies such as the 1000 Genomes Project and the International Cancer Genome Consortium. The high-throughput sequencing and sequence-capture technologies are also providing new opportunities to study Mendelian disorders through exome sequencing and whole-genome sequencing. This paper reviews these major developments in human genetics and genomics over the past decade. PMID:22155605

Draft environmental impact statement: Space Shuttle Advanced Solid Rocket Motor Program

NASA Technical Reports Server (NTRS)

1988-01-01

The proposed action is design, development, testing, and evaluation of Advanced Solid Rocket Motors (ASRM) to replace the motors currently used to launch the Space Shuttle. The proposed action includes design, construction, and operation of new government-owned, contractor-operated facilities for manufacturing and testing the ASRM's. The proposed action also includes transport of propellant-filled rocket motor segments from the manufacturing facility to the testing and launch sites and the return of used and/or refurbished segments to the manufacturing site.

Environmental Impact Analysis Process. Preliminary Draft Environmental Impact Statement Construction and Operation of Space Launch Complex 7. Volume 2. Appendices

DTIC Science & Technology

1988-11-15

3 Sincerely, William H. Ehorn3Suerintenent United States Department of the Interior FISH AND WILDLIFE SERVICE LAGUNA NIGUEL FIELD OFFICE 24000 Avila...Road Laguna Niguel, California 92656 Ma’ 19, 1988 Department of the Air Force Headquarters Space Division (AFSC) Los Angeles Air Force Station P. 0...agricultural supply, and ground water recharge. In addition, all minor streams and tributaries in the central coastal region, including Honda Creek and Jalama

Contribution towards a draft revision of recommendations 681: Propagation data required for the design of Earth-space land mobile telecommunications systems

NASA Technical Reports Server (NTRS)

Davarian, Faramaz; Bishop, Dennis

1993-01-01

Propagation models that can be used for the design of earth-space land mobile-satellite telecommunications systems are presented. These models include: empirical roadside shadowing, attenuation frequency scaling, fade and non-fade duration distribution, multipath in a mountain environment, and multipath in a roadside tree environment. Propagation data from helicopter-mobile and satellite-mobile measurements in Australia and the United States were used to develop the models.

Contribution Towards a Draft Revision of Recommendation 681 Propogation Data Required for the Design of Earth-Space Land Mobile Telecommunications Systems

NASA Technical Reports Server (NTRS)

Davarian, F.; Bishop, D.

1993-01-01

Propogation models that can be used for the design of Earth-space land mobile-satellite telecommunications systems are presented. These models include: empirical roadside shadowing, attenuation frequency scaling, fade and non-fade duration distribution, multipath in a mountain environment, and multipath in a roadside tree environment. Propogation data from helicopter-mobile and satellite-mobile measurements in Australia and the United States were used to develop the models.

Monterey Peninsula Water Supply Project Supplemental Draft Environmental Impact Report/Statement. Volume 2. Monterey Peninsula Water Management District

DTIC Science & Technology

1991-08-01

0 (Malacothrix saxatilis var. arachnoidea) j 88089 9-79 9. Vcetation and Terestrial W TABLE 9-6 (Continued) sit,2 Taa Status’ NLP CAC SCIC CHU NSC...construction, the parking site could become a park and ride facdy. Alternatively, the contractor could lease existing unused parking space from private...moie oe Residential - mutti~family Trans’int lodgng - motels, hotels I Schools, libraries, churches, hospitals. Actively used open spaces

Architectural concepts of Martian bases built: of domes, around greenhouses and into slopes -the human aspect and the technology

NASA Astrophysics Data System (ADS)

Kozicki, Janek; Kozicka, Joanna

Human missions to Mars are a special kind of space missions due to their long duration. The human aspect of such missions becomes as important as the technological one. The need for a human friendly and comfortable habitat arises. Studies of human behavior in ICEs have shown that larger groups of people mean a lower occurrence of conflicts. However, for a larger crew a larger habitat has to be designed -a Martian base. The research deals with psychological, sociological and technological aspects influencing the architectural design of a Martian Base. Extreme conditions present on Mars demand a partic-ular approach to technological and architectural design. To reduce the cost of building a bigger habitat, low cost solutions have been inquired into. A series of analyses has been performed to identify the best architectural solutions for a Martian base. A review of existing technologies and extreme condition habitats (both terrestrial and extraterrestrial) has revealed solutions that are the most reliable and efficient ones. Additionally, innovative technologies have been analyzed in search of the best candidates for actual base construction. Low cost solutions have been prioritized in the process. An in-depth study of architectural problems inherent in the design of a Martian base has resulted in a number of guidelines for the architect. The main ones are introduced in this review. Based on them, several concepts have been drafted as examples of user-friendly and aesthetically pleasing habitats. They are discussed in the following order: habitats made of domes, those built around greenhouses and those situated in sloping terrain. One of them is presented in detail, including interior design.

It's Time to Develop a New "Draft Test Protocol" for a Mars Sample Return Mission (or Two…).

PubMed

Rummel, John D; Kminek, Gerhard

2018-04-01

The last time NASA envisioned a sample return mission from Mars, the development of a protocol to support the analysis of the samples in a containment facility resulted in a "Draft Test Protocol" that outlined required preparations "for the safe receiving, handling, testing, distributing, and archiving of martian materials here on Earth" (Rummel et al., 2002 ). This document comprised a specific protocol to be used to conduct a biohazard test for a returned martian sample, following the recommendations of the Space Studies Board of the US National Academy of Sciences. Given the planned launch of a sample-collecting and sample-caching rover (Mars 2020) in 2 years' time, and with a sample return planned for the end of the next decade, it is time to revisit the Draft Test Protocol to develop a sample analysis and biohazard test plan to meet the needs of these future missions. Key Words: Biohazard detection-Mars sample analysis-Sample receiving facility-Protocol-New analytical techniques-Robotic sample handling. Astrobiology 18, 377-380.

OSD CALS Architecture Master Plan Study. Data Dictionary. Concept Paper. Draft Version 1.2. Volume 29

DOT National Transportation Integrated Search

1989-10-01

Rapid advances in information technology are changing the way technical data is created, stored, and used. These advances have created opportunities to reduce costs and improve productivity in both the administration of data and in the acquisition an...

Connected Vehicle Pilot Deployment Concept phase 1 : comprehensive Pilot Deployment Plan : ICF Wyoming : draft final report.

DOT National Transportation Integrated Search

2016-08-11

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

LED street lighting evaluation -- phase II : LED specification and life-cycle cost analysis.

DOT National Transportation Integrated Search

2015-01-01

Phase II of this study focused on developing a draft specification for LED luminaires to be used by IDOT : and a life-cycle cost analysis (LCCA) tool for solid state lighting technologies. The team also researched the : latest developments related to...

An Rx for 20/20 Vision: Vision Planning and Education.

ERIC Educational Resources Information Center

Chrisman, Gerald J.; Holliday, Clifford R.

1996-01-01

Discusses the Dallas Independent School District's decision to adopt an integrated technology infrastructure and the importance of vision planning for long term goals. Outlines the vision planning process: first draft; environmental projection; restatement of vision in terms of market projections, anticipated customer needs, suspected competitor…

Java: An Explosion on the Internet.

ERIC Educational Resources Information Center

Read, Tim; Hall, Hazel

Summer 1995 saw the release, with considerable media attention, of draft versions of Sun Microsystems' Java computer programming language and the HotJava browser. Java has been heralded as the latest "killer" technology in the Internet explosion. Sun Microsystems and numerous companies including Microsoft, IBM, and Netscape have agreed…

Use of Technology Solutions to Improve CAD Instruction

ERIC Educational Resources Information Center

Ault, Holly K.; Fraser, Alister

2012-01-01

Engineering Graphics curricula have changed dramatically in the past three decades. In the past, students in nearly all engineering disciplines were instructed in manual drafting and descriptive geometry. Students spent many hours "on the board", and this training enhanced the students' graphics communication, design and visualization…

46 CFR 111.103-9 - Machinery stop stations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fan, induced draft fan, blower of an inert gas system, fuel oil transfer pump, fuel oil unit, fuel oil service pump, and any other fuel oil pumps must have a stop control that is outside of the space containing the pump or fan. (b) Each stop control must meet § 111.103-7. ...

46 CFR 111.103-9 - Machinery stop stations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... fan, induced draft fan, blower of an inert gas system, fuel oil transfer pump, fuel oil unit, fuel oil service pump, and any other fuel oil pumps must have a stop control that is outside of the space containing the pump or fan. (b) Each stop control must meet § 111.103-7. ...

46 CFR 111.103-9 - Machinery stop stations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... fan, induced draft fan, blower of an inert gas system, fuel oil transfer pump, fuel oil unit, fuel oil service pump, and any other fuel oil pumps must have a stop control that is outside of the space containing the pump or fan. (b) Each stop control must meet § 111.103-7. ...

46 CFR 111.103-9 - Machinery stop stations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... fan, induced draft fan, blower of an inert gas system, fuel oil transfer pump, fuel oil unit, fuel oil service pump, and any other fuel oil pumps must have a stop control that is outside of the space containing the pump or fan. (b) Each stop control must meet § 111.103-7. ...

76 FR 16737 - Notice of Availability of the Draft Environmental Impact Statement for the Proposed South Coast...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

..., visual effects, noise, vibration, cultural resources, air quality, open space, farmland, hazardous... is also available to review at the following locations: 1. State Transportation Library of Massachusetts 10 Park Plaza, 2nd Floor, Boston, MA. 2. Russell Memorial Library, 88 Main Street, Acushnet, MA. 3...

46 CFR 111.103-9 - Machinery stop stations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fan, induced draft fan, blower of an inert gas system, fuel oil transfer pump, fuel oil unit, fuel oil service pump, and any other fuel oil pumps must have a stop control that is outside of the space containing the pump or fan. (b) Each stop control must meet § 111.103-7. ...

An industry update: the latest developments in therapeutic delivery.

PubMed

Steinbach, Oliver C

2017-03-01

The present industry update covers the period 1-31 January 2017, with information sourced from company press releases, regulatory and patent agencies as well as the scientific literature. With a new year come new resolutions, annual operation plans but also reports and outlooks for the years(s) to come. A number of the latter have been published in January forecasting various spaces in drug delivery (Market and Research). Also a number of financing deals were closed being fresh into the year such as Ossianix and Ocular Therapeutix and contract manufacturers will show their offerings at the 2017 MD&M West Medtech event (Lubrizol, Trelleborg). The US FDA released some new (draft) guidelines for combination products to regulate standards and disputes in this increasingly important field. Recent advances in artificial pancreas technology demonstrates that while the age of nanotechnology and gene therapy (Bluebird Bio) has arrived, implantable, closed-loop delivery systems (Medtronic) are just to pass successfully the clinic and come in reach of patients.

Computer Graphics.

ERIC Educational Resources Information Center

Halpern, Jeanne W.

1970-01-01

Computer graphics have been called the most exciting development in computer technology. At the University of Michigan, three kinds of graphics output equipment are now being used: symbolic printers, line plotters or drafting devices, and cathode-ray tubes (CRT). Six examples are given that demonstrate the range of graphics use at the University.…

77 FR 65190 - National Committee on Vital and Health Statistics: Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-25

... Office of the National Coordinator for Health Information Technology (ONC), and the Office for Civil Rights (OCR). The Committee will also discuss its draft report on Data Stewardship in Community Health... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Committee on Vital and Health Statistics: Meeting...

INDEPENDENT POWER PLANT USING WOOD WASTE

EPA Science Inventory

A 1 MWe power plant using waste wood is to be installed at a U.S. Marine Corps base, which will supply all the wood for the plant from a landfill site. The core energy conversion technology is a down-draft gasifier supplying approximately 150 Btu/scf gas to both spark ignition an...

76 FR 43374 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

...'s design and content, using an iterative process to improve the draft form to make it easier for... considered private. Type of Review: New Collection. Affected Public: Individuals and businesses or other for... other forms of information technology; and (e) estimates of capital or start-up costs and costs of...

78 FR 14804 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

... the data collection plans and draft instruments, email [email protected] or call the HRSA Reports...; (c) workforce recruitment and retention; (d) sustainability; (e) health information technology; (f... ADDRESSES: Submit your comments to [email protected] or mail the HRSA Reports Clearance Officer, Room 10-29...

76 FR 24924 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... use of automated collection techniques or other forms of information technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, O1-F21, One White Flint North, 11555 Rockville Pike, Rockville...

76 FR 7817 - Announcing Draft Federal Information Processing Standard 180-4, Secure Hash Standard, and Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... before May 12, 2011. ADDRESSES: Written comments may be sent to: Chief, Computer Security Division... FURTHER INFORMATION CONTACT: Elaine Barker, Computer Security Division, National Institute of Standards... Quynh Dang, Computer Security Division, National Institute of Standards and Technology, Gaithersburg, MD...

77 FR 2514 - National Ocean Council-National Ocean Policy Draft Implementation Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... for users, more efficient and coordinated decision-making, and improved sharing of data and technology... the preparation of the final plan. We welcome your general input, and also pose the following...: Strengthen and integrate Federal and non-Federal ocean observing systems, sensors, data collection platforms...

Models For Assessing The Impacts And The Potential Benefits Of Intelligent Transportation Systems, A Working Paper, Draft

DOT National Transportation Integrated Search

1995-08-15

THE ABSENCE OF SYSTEMATIC ANALYSIS OF THE SOCIETAL BENEFITS AND COSTS OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) TECHNOLOGIES -- IN THE SHORT-TERM AS WELL AS LONG TERM -- IS WELL RECOGNIZED IN THE ITS COMMUNITY. THIS UNMET NEED HAS BEEN RECOGNIZED, ...

Draft genome sequence of Enterobacter cloacae HBY, a ST128 clinical strain co-producing KPC-2 and NDM-1 carbapenemases.

PubMed

Li, Xi; Zhu, Yongze; Shen, Mengyuan; Du, Jing; Zhang, Lei; Wang, Dairong

2018-03-01

Enterobacter cloacae is one of the major pathogens responsible for a variety of human infections. Here we report the draft genome sequence of multidrug-resistant E. cloacae strain HBY isolated from a female patient in China. Whole genomic DNA of E. cloacae strain HBY was extracted and was sequenced using an Illumina HiSeq™ 2000 platform. The generated sequence reads were assembled using CLC Genomics Workbench. The draft genome was annotated using Rapid Annotations using Subsystems Technology (RAST), and the presence of antimicrobial resistance genes was identified. The 5799439-bp genome contains various antimicrobial resistance genes conferring resistance to aminoglycosides, β-lactams, fosfomycin, macrolides, sulphonamides and fluoroquinolones. Notably, the strain was identified to carry two main carbapenemase genes (bla KPC-2 and bla NDM-1 ). The genome sequence reported in this study will provide valuable information to understand antibiotic resistance mechanisms in this strain. It is important to monitor the spread strains of Enterobacter sp. encoding both of these carbapenemase genes. Copyright © 2017 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

Draft standard for color AMLCDs in U.S. military aircraft

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.; Dolezal, William K.; Schur, Keith; Liccione, John W.

1994-06-01

Flight instruments have begun to use color active liquid crystal displays (AMLCDs), signaling the beginning of a significant transition from electromechanical and cathode ray tube display designs to AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and gray scale-capable, high-pixel-count, flat-panel displays for weapon systems. The Wright Laboratory is leading the development of standard and specification documentation for this new generation of display modules based on requirements for U.S. military aircraft. These requirements are similar in many ways to those of both the civil aviation and automotive industries. Accordingly, commonality with these applications is incorporated, where possible, along with the requirements for all military combat applications. Industry and government organizations are involved in this process through workshops and draft review processes. Military procurement specifications for combat system applications may use this information as a source of recommended best practice for this new generation of digital flat panel displays. The draft standard will be revised based upon continuing feedback by early 1995.

Between the Rock and a Hard Place: The CCMC as a Transit Station Between Modelers and Forecasters

NASA Technical Reports Server (NTRS)

Hesse, Michael

2009-01-01

The Community Coordinated Modeling Center (CCMC) is a US inter-agency activity aiming at research in support of the generation of advanced space weather models. As one of its main functions, the CCMC provides to researchers the use of space science models, even if they are not model owners themselves. The second CCMC activity is to support Space Weather forecasting at national Space Weather Forecasting Centers. This second activity involved model evaluations, model transitions to operations, and the development of draft Space Weather forecasting tools. This presentation will focus on the latter element. Specifically, we will discuss the process of transition research models, or information generated by research models, to Space Weather Forecasting organizations. We will analyze successes as well as obstacles to further progress, and we will suggest avenues for increased transitioning success.

77 FR 68748 - Intent To Prepare a Draft Environmental Impact Statement and Feasibility Report for the Cano...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... recreation and tourism, with minimal temporary negative impact on the ecosystem and the adjacent communities... public spaces for recreation and interaction between the communities, visitors and the CMP identified as... impoverished communities in San Juan, the CMP connects the San Juan Bay with the San Jose and Los Corozos...

Earth Observations and the Role of UAVs: A Capabilities Assessment

NASA Technical Reports Server (NTRS)

Cox, Timothy H.

2006-01-01

This three-volume document, based on the draft document located on the website given on page 6, presents the findings of a NASA-led capabilities assessment of Uninhabited Aerial Vehicles (UAVs) for civil (defined as non-DoD) use in Earth observations. Volume 1 is the report that presents the overall assessment and summarizes the data. The second volume contains the appendices and references to address the technologies and capabilities required for viable UAV missions. The third volume is the living portion of this effort and contains the outputs from each of the Technology Working Groups (TWGs) along with the reviews conducted by the Universities Space Research Association (USRA). The focus of this report, intended to complement the Office of the Secretary of Defense UAV Roadmap, is four-fold: 1) To determine and document desired future Earth observation missions for all UAVs based on user-defined needs; 2) To determine and document the technologies necessary to support those missions; 3) To discuss the present state of the art platform capabilities and required technologies, including identifying those in progress, those planned, and those for which no current plans exist; 4) Provide the foundations for development of a comprehensive civil UAV roadmap. It is expected that the content of this report will be updated periodically and used to assess the feasibility of future missions. In addition, this report will provide the foundation to help influence funding decisions to develop those technologies that are considered enabling or necessary but are not contained within approved funding plans. This document is written such that each section will be supported by an Appendix that will give the reader a more detailed discussion of that section's topical materials.

Refining a taxonomy for guideline implementation: results of an exercise in abstract classification

PubMed Central

2013-01-01

Background To better understand the efficacy of various implementation strategies, improved methods for describing and classifying the nature of these strategies are urgently required. The aim of this study was to develop and pilot the feasibility of a taxonomy to classify the nature and content of implementation strategies. Methods A draft implementation taxonomy was developed based on the Cochrane Effective Practice and Organisation of Care (EPOC) data collection checklist. The draft taxonomy had four domains (professional, financial, organisational and regulatory) covering 49 distinct strategies. We piloted the draft taxonomy by using it to classify the implementation strategies described in the conference abstracts of the implementation stream of the 2010 Guideline International Network Conference. Five authors classified the strategies in each abstract individually. Final categorisation was then carried out in a face-to-face consensus meeting involving three authors. Results The implementation strategies described in 71 conference abstracts were classified. Approximately 15.5% of abstracts utilised strategies that could not be categorised using the draft taxonomy. Of those strategies that could be categorised, the majority were professionally focused (57%). A total of 41% of projects used only one implementation strategy, with 29% using two and 31% three or more. The three most commonly used strategies were changes in quality assurance, quality improvement and/or performance measurement systems, changes in information and communication technology, and distribution of guideline materials (via hard-copy, audio-visual and/or electronic means). Conclusions Further refinement of the draft taxonomy is required to provide hierarchical dimensions and granularity, particularly in the areas of patient-focused interventions, those concerned with audit and feedback and quality improvement, and electronic forms of implementation, including electronic decision support. PMID:23497520

Refining a taxonomy for guideline implementation: results of an exercise in abstract classification.

PubMed

Mazza, Danielle; Bairstow, Phillip; Buchan, Heather; Chakraborty, Samantha Paubrey; Van Hecke, Oliver; Grech, Cathy; Kunnamo, Ilkka

2013-03-15

To better understand the efficacy of various implementation strategies, improved methods for describing and classifying the nature of these strategies are urgently required. The aim of this study was to develop and pilot the feasibility of a taxonomy to classify the nature and content of implementation strategies. A draft implementation taxonomy was developed based on the Cochrane Effective Practice and Organisation of Care (EPOC) data collection checklist. The draft taxonomy had four domains (professional, financial, organisational and regulatory) covering 49 distinct strategies. We piloted the draft taxonomy by using it to classify the implementation strategies described in the conference abstracts of the implementation stream of the 2010 Guideline International Network Conference. Five authors classified the strategies in each abstract individually. Final categorisation was then carried out in a face-to-face consensus meeting involving three authors. The implementation strategies described in 71 conference abstracts were classified. Approximately 15.5% of abstracts utilised strategies that could not be categorised using the draft taxonomy. Of those strategies that could be categorised, the majority were professionally focused (57%). A total of 41% of projects used only one implementation strategy, with 29% using two and 31% three or more. The three most commonly used strategies were changes in quality assurance, quality improvement and/or performance measurement systems, changes in information and communication technology, and distribution of guideline materials (via hard-copy, audio-visual and/or electronic means). Further refinement of the draft taxonomy is required to provide hierarchical dimensions and granularity, particularly in the areas of patient-focused interventions, those concerned with audit and feedback and quality improvement, and electronic forms of implementation, including electronic decision support.

The advanced orbiting systems testbed program: Results to date

NASA Technical Reports Server (NTRS)

Newsome, Penny A.; Otranto, John F.

1993-01-01

The Consultative Committee for Space Data Systems Recommendations for Packet Telemetry and Advanced Orbiting Systems (AOS) propose standard solutions to data handling problems common to many types of space missions. The Recommendations address only space/ground and space/space data handling systems. Goddard Space Flight Center's AOS Testbed (AOST) Program was initiated to better understand the Recommendations and their impact on real-world systems, and to examine the extended domain of ground/ground data handling systems. Central to the AOST Program are the development of an end-to-end Testbed and its use in a comprehensive testing program. Other Program activities include flight-qualifiable component development, supporting studies, and knowledge dissemination. The results and products of the Program will reduce the uncertainties associated with the development of operational space and ground systems that implement the Recommendations. The results presented in this paper include architectural issues, a draft proposed standardized test suite and flight-qualifiable components.

[Methodological guideline for the efficacy and safety assessment of new pharmaceuticals: implementation of EUnetHTA's recommendations].

PubMed

Ubago Pérez, Ruth; Castillo Muñoz, María Auxiliadora; Banqueri, Mercedes Galván; García Estepa, Raúl; Alfaro Lara, Eva Rocío; Vega Coca, María Dolores; Beltrán Calvo, Carmen; Molina López, Teresa

The European network for Health Technology Assessment (EUnetHTA) is the network of public health technology assessment (HTA) agencies and entities from across the EU. In this context, the HTA Core Model ® , has been developed. The Andalusian Agency for Health Technology Assessment (AETSA) is a member of the Spanish HTA Network and EUnetHTA collaboration In addition, AETSA participates in the new EUnetHTA Joint Action 3 (JA, 2016-2019). Furthermore, AETSA works on pharmaceutical assessments. Part of this work involves drafting therapeutic positioning reports (TPRs) on drugs that have recently been granted marketing authorisation, which is overseen by the Spanish Agency of Medicines and Medical Devices (AEMPS). AETSA contributes by drafting "Evidence synthesis reports: pharmaceuticals" in which a rapid comparative efficacy and safety assessment is performed for drugs for which a TPR will be created. To create this type of report, AETSA follows its own methodological guideline based on EUnetHTA guidelines and the HTA Core Model ® . In this paper, the methodology that AETSA has developed to create the guideline for "Evidence synthesis reports: pharmaceuticals" is described. The structure of the report itself is also presented. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Spatial Visualization Ability and Impact of Drafting Models: A Quasi Experimental Study

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Jovanovic, Vukica

2014-01-01

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of…

Exploiting long read sequencing technologies to establish high quality highly contiguous pig reference genome assemblies

USDA-ARS?s Scientific Manuscript database

The current pig reference genome sequence (Sscrofa10.2) was established using Sanger sequencing and following the clone-by-clone hierarchical shotgun sequencing approach used in the public human genome project. However, as sequence coverage was low (4-6x) the resulting assembly was only of draft qua...

Online Technologies for Teaching Writing: Students React to Teacher Response in Voice and Written Modalities

ERIC Educational Resources Information Center

Kim, Loel

2004-01-01

English departments are increasingly under pressure to offer writing courses online, but research that informs effective pedagogies--including effective ways to respond to students' drafts--is still limited. By investigating students' perceptions of online teacher response to student writing, this study suggests that in order to develop sound…

Technology Education: A Contemporary Perspective

ERIC Educational Resources Information Center

Litowitz, Len S.; Warner, Scott A.

2008-01-01

In the June 2007 issue of "Phi Delta Kappan" (EJ767455), James Howlett and Brad Huff authored an article about the strong relationship between basic skills in math and reading and such technical skills as machining, drafting, and working with electricity or electronics. They also suggested that, as a result of No Child Left Behind, the…

76 FR 67418 - Request for Comments on NIST Special Publication 500-293, US Government Cloud Computing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

...-1659-01] Request for Comments on NIST Special Publication 500-293, US Government Cloud Computing... Publication 500-293, US Government Cloud Computing Technology Roadmap, Release 1.0 (Draft). This document is... (USG) agencies to accelerate their adoption of cloud computing. The roadmap has been developed through...

75 FR 19990 - Notice of Availability of the Draft Environmental Impact Statement for the NextLight Renewable...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... to construct a solar photovoltaic (PV) plant facility approximately two miles southeast of Primm... action alternatives would use solar PV technology, although the specific types of arrays and trackers... Statement for the NextLight Renewable Power, LLC, Silver State Solar Project, Primm, NV AGENCY: Bureau of...

77 FR 40338 - Announcing Revised Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... may be sent to: Chief, Computer Security Division, Information Technology Laboratory, ATTN: Comments... introduces the concept of a virtual contact interface, over which all functionality of the PIV Card is... Laboratory Programs. [FR Doc. 2012-16725 Filed 7-6-12; 8:45 am] BILLING CODE 3510-13-P ...

Structural Science Laboratory Supplement. High-Technology Training Module.

ERIC Educational Resources Information Center

Luthens, Roger

This module, a laboratory supplement on the theory of bending and properties of sections, is part of a first-year, postsecondary structural science technical support course for architectural drafting and design. The first part of this two-part supplement is directed at the instructor and includes the following sections: program objectives; course…

Chromosome-scale scaffolding of the black raspberry (Rubus occidentalis L.) genome based on chromatin interaction data

USDA-ARS?s Scientific Manuscript database

Black raspberry (Rubus occidentalis L.) is a niche fruit crop valued for its flavour and potential health benefits. The improvement of fruit and cane characteristics via molecular breeding technologies has been hindered by the lack of a high-quality reference genome. The recently released draft geno...

Cost-Cutting in Higher Education: Lessons Learned from Collaboration, Technology, and Outsourcing Initiatives. Draft.

ERIC Educational Resources Information Center

Kaganoff, Tessa

This document presents a review of cost-containment initiatives relevant to higher education institutions. Originally commissioned to examine cost containment initiatives carried out by institutions affiliated with the Foundation for Independent Higher Education (FIHE), the paper was expanded to include a sector-wide review of three types of…

75 FR 48731 - Notice of Availability for Public Comment on the Draft Joint Subcommittee on Ocean Science and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

..., the academic community and the private sector in providing IOOS environmental information, products... Subcommittee on Ocean Science and Technology--Interagency Ocean Observation Committee Public-Private Use Policy... a 60-day public comment period for the Public-Private Use Policy mandated by the Integrated Coastal...

Customized On-site Resource Training Services (CORTS): A Partnership Program.

ERIC Educational Resources Information Center

Macquarie Univ., North Ryde (Australia). Special Education Centre.

In 1983, New Brunswick Community College-Moncton (NBCCM) was awarded funding to establish a Computer Aided Drafting/Manufacturing (CAD/CAM) resource center to train students and assist industry in researching and adopting CAD/CAM technology. However, inherent constraints in industry and the absorption of college resources by in-house training…

77 FR 27055 - National and Governmental Advisory Committees to the U.S. Representative to the Commission for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... authorized under Articles 17 and 18 of the North American Agreement on Environmental Cooperation (NAAEC... strategic, scientific, technological, regulatory, and economic issues related to implementation and further... addressing the draft Guidelines for Submissions on Enforcement Matters under Articles 14 and 15 of the NAAEC...

78 FR 59980 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... action to submit an information collection request to the Office of Management and Budget (OMB) and... information technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, Room O-1F21, One White Flint...

Storytelling, Technology and Children's Literacy Development.

ERIC Educational Resources Information Center

Amaro, Ana Carla; Moreira, Antonio

This paper reports on a project started November 1999, which aims at understanding the storytelling structuring processes put into action by children at primary education level. The ultimate goal of this study is to draft a script for a computer tool to support story telling. For this purpose it identifies narrative scheme as the main organizing…

Computer Programs for Technical Communicators: The Compelling Curriculum. Working Draft.

ERIC Educational Resources Information Center

Selfe, Cynthia L.; Wahlstrom, Billie J.

A series of computer programs have been developed at Michigan Technological University for use with technical writing and technical communications classes. The first type of program in the series, CURIE II, includes process-based modules, each of which corresponds to one of the following assignments: memoranda, resumes, feasibility reports,…

A Plan to the Future in Home Economics Education. Draft Curriculum.

ERIC Educational Resources Information Center

Ruckes, Nina Tiglio; Mongillo, Michael

This curriculum guide was prepared to help Connecticut high schools offer an opportunity to disadvantaged high school students who are interested in home economics education to earn some college credit toward a degree in dietetic technology. The curriculum guide includes an overview of the course with a course description, recommended textbooks,…

Polymorphic SSR markers for Plasmopara obducens (Peronosporaceae), the newly emergent downy mildew pathogen of Impatiens (Balsaminaceae)

USDA-ARS?s Scientific Manuscript database

Premise of the study: Microsatellite markers were developed for Plasmopara obducens, the causal agent of the newly emergent downy mildew disease of Impatiens walleriana. Methods and Results: A 151.2 Mb draft genome assembly was generated from P. obducens using Illumina technology and mined to identi...

75 FR 39535 - Agency Information Collection Activities: Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... opportunity for public comment on proposed data collection projects (section 3506(c)(2)(A) of Title 44, United... more information on the proposed project or to obtain a copy of the data collection plans and draft... forms of information technology. Proposed Project: Bureau of Primary Health Care (BPHC) Uniform Data...

Drafting 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in employment after school.…

77 FR 56817 - Notice of Public Hearings for the Draft Environmental Impact Statement for Medical Facilities...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... buildings (Buildings 2, 4, 6, 7, and 8) and construction of a single 5-story replacement facility in the... clinics; incorporate evidence-based design; include expansion of technology; and allow for operational... regulation. 2. MFD--demolition of five hospital buildings, construction of a single 5-story replacement...

Occupationally Related Science. Draft Curriculum 1986-87.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of Occupational Education Programs.

To prepare occupational students for employment, a basic understanding of scientific knowledge and the processes of science that have been applied in the development of tools, machines, instruments, and technological techniques or processes should be taught. When a second unit of science was included for all high school students in the New York…

The Transcriptomics of Secondary Growth and Wood Formation in Conifers

PubMed Central

Carvalho, Ana; Paiva, Jorge; Louzada, José; Lima-Brito, José

2013-01-01

In the last years, forestry scientists have adapted genomics and next-generation sequencing (NGS) technologies to the search for candidate genes related to the transcriptomics of secondary growth and wood formation in several tree species. Gymnosperms, in particular, the conifers, are ecologically and economically important, namely, for the production of wood and other forestry end products. Until very recently, no whole genome sequencing of a conifer genome was available. Due to the gradual improvement of the NGS technologies and inherent bioinformatics tools, two draft assemblies of the whole genomes sequence of Picea abies and Picea glauca arose in the current year. These draft genome assemblies will bring new insights about the structure, content, and evolution of the conifer genomes. Furthermore, new directions in the forestry, breeding and research of conifers will be discussed in the following. The identification of genes associated with the xylem transcriptome and the knowledge of their regulatory mechanisms will provide less time-consuming breeding cycles and a high accuracy for the selection of traits related to wood production and quality. PMID:24288610

Genome sequence of the phylogenetically isolated spirochete Leptonema illini type strain (3055T)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huntemann, Marcel; Stackebrandt, Erko; Held, Brittany

2013-01-01

Leptonema illini Hovind-Hougen 1979 is the type species of the genus Leptonema, family Leptospiraceae, phylum Spirochaetes. Organisms of this family have a Gram-negative-like cell enve- lope consisting of a cytoplasmic membrane and an outer membrane. The peptidoglycan layer is as- sociated with the cytoplasmic rather than the outer membrane. The two flagella of members of Leptospiraceae extend from the cytoplasmic membrane at the ends of the bacteria into the periplasmic space and are necessary for their motility. Here we describe the features of the L. illini type strain, together with the complete genome sequence, and annotation. This is the firstmore » genome sequence (finished at the level of Improved High Quality Draft) to be reported from of a member of the genus Leptonema and a representative of the third genus of the family Leptospiraceae for which complete or draft genome sequences are now available. The three scaffolds of the 4,522,760 bp draft genome sequence reported here, and its 4,230 protein-coding and 47 RNA genes are part of the Ge- nomic Encyclopedia of Bacteria and Archaea project.« less

Cooper Lake and Channels, Texas.

DTIC Science & Technology

1977-04-01

maintenance. Adverse esthetic impacts of the channel and levees. Inundation of some 90 archeo- logical sites which have been tested to the extent...below the reservoir was approximately ’,0 percent complete. In June 1976, the draft environmental impact statement (EIS) was coordinated for review and...construction necessitates cutting off natural channel bends. 3. a. Environmental Impacts : (I) Reservoir. The flood storage space in the approved

Wheels Don't Have to Be Round

ERIC Educational Resources Information Center

Laird, Shirley

2012-01-01

Every year, the author's eighth-graders do some projects on color mixing and color schemes. In this article, the author gives a twist to the basic color wheel. Using rough-draft paper the same size as the paper they would eventually work on, students were to figure out a way to divide it into six spaces. They were not limited to basic rectangles,…

Conversing in Marginal Spaces: Developmental Writers' Responses to Teacher Comments

ERIC Educational Resources Information Center

Calhoon-Dillahunt, Carolyn; Forrest, Dodie

2013-01-01

As writing instructors, the authors spend hours "talking back" to their students through written comments on their drafts. But how do student writers receive their comments, and what do they "do" with this feedback? Teachers invest so much time and energy in their responses to papers. How do they know what gets through, what makes sense to their…

76 FR 38677 - Draft Environmental Impact Statement for the Proposed Los Coyotes Band of Cahuilla and Cupeño...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... administration space. Food and beverage facilities would include two full service restaurants, a drive-in restaurant, a buffet, a coffee shop, three service bars, and a lounge. The hotel tower would have approximately 100 rooms and a full-service restaurant. Both the gaming facility and the hotel would be open 24...

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document. Volume 1: Major trades. Book 2: Draft final

NASA Technical Reports Server (NTRS)

1991-01-01

Topics addressed are: (1) an artificial gravity assessment study; (2) Mars mission transport vehicle (MTV)/Mars excursion vehicle (MEV) mission scenarios; (3) aerobrake issues; (4) equipment life and self-check; (5) earth-to-orbit (ETO) heavy lift launch vehicle (HLLV) definition trades; and (6) risk analysis.

Improving the energy efficiency of sparse linear system solvers on multicore and manycore systems.

PubMed

Anzt, H; Quintana-Ortí, E S

2014-06-28

While most recent breakthroughs in scientific research rely on complex simulations carried out in large-scale supercomputers, the power draft and energy spent for this purpose is increasingly becoming a limiting factor to this trend. In this paper, we provide an overview of the current status in energy-efficient scientific computing by reviewing different technologies used to monitor power draft as well as power- and energy-saving mechanisms available in commodity hardware. For the particular domain of sparse linear algebra, we analyse the energy efficiency of a broad collection of hardware architectures and investigate how algorithmic and implementation modifications can improve the energy performance of sparse linear system solvers, without negatively impacting their performance. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

SpaceCube 2.0: An Advanced Hybrid Onboard Data Processor

NASA Technical Reports Server (NTRS)

Lin, Michael; Flatley, Thomas; Godfrey, John; Geist, Alessandro; Espinosa, Daniel; Petrick, David

2011-01-01

The SpaceCube 2.0 is a compact, high performance, low-power onboard processing system that takes advantage of cutting-edge hybrid (CPU/FPGA/DSP) processing elements. The SpaceCube 2.0 design concept includes two commercial Virtex-5 field-programmable gate array (FPGA) parts protected by gradiation hardened by software" technology, and possesses exceptional size, weight, and power characteristics [5x5x7 in., 3.5 lb (approximately equal to 12.7 x 12.7 x 17.8 cm, 1.6 kg) 5-25 W, depending on the application fs required clock rate]. The two Virtex-5 FPGA parts are implemented in a unique back-toback configuration to maximize data transfer and computing performance. Draft computing power specifications for the SpaceCube 2.0 unit include four PowerPC 440s (1100 DMIPS each), 500+ DSP48Es (2x580 GMACS), 100+ LVDS high-speed serial I/Os (1.25 Gbps each), and 2x190 GFLOPS single-precision (65 GFLOPS double-precision) floating point performance. The SpaceCube 2.0 includes PROM memory for CPU boot, health and safety, and basic command and telemetry functionality; RAM memory for program execution; and FLASH/EEPROM memory to store algorithms and application code for the CPU, FPGA, and DSP processing elements. Program execution can be reconfigured in real time and algorithms can be updated, modified, and/or replaced at any point during the mission. Gigabit Ethernet, Spacewire, SATA and highspeed LVDS serial/parallel I/O channels are available for instrument/sensor data ingest, and mission-unique instrument interfaces can be accommodated using a compact PCI (cPCI) expansion card interface. The SpaceCube 2.0 can be utilized in NASA Earth Science, Helio/Astrophysics and Exploration missions, and Department of Defense satellites for onboard data processing. It can also be used in commercial communication and mapping satellites.

Trash to Gas: Converting Space Waste into Useful Supply Products

NASA Technical Reports Server (NTRS)

Tsoras, Alexandra

2013-01-01

The cost of sending mass into space with current propulsion technology is very expensive, making every item a crucial element of the space mission. It is essential that all materials be used to their fullest potential. Items like food, packaging, clothing, paper towels, gloves, etc., normally become trash and take up space after use. These waste materials are currently either burned up upon reentry in earth's atmosphere or sent on cargo return vehicles back to earth: a very wasteful method. The purpose of this project was to utilize these materials and create useful products like water and methane gas, which is used for rocket fuel, to further supply a deep space mission. The system used was a thermal degradation reactor with the configuration of a down-draft gasifier. The reactor was loaded with approximately 100g of trash simulant and heated with two external ceramic heaters with separate temperature control in order to create pyrolysis and gasification in one zone and incineration iri a second zone simultaneously. Trash was loaded into the top half of the reactor to undergo pyrolysis while the downdraft gas experienced gasification or incineration to treat tars and maximize the production of carbon dioxide. Minor products included carbon monoxide, methane, and other hydrocarbons. The carbon dioxide produced can be sent to a Sabatier reactor to convert the gas into methane, which can be used as rocket propellant. In order to maximize the carbon dioxide and useful gases produced, and minimize the unwanted tars and leftover ashen material, multiple experiments were performed with altered parameters such as differing temperatures, flow rates, and location of inlet air flow. According to the data received from these experiments, the process will be further scaled up and optimized to ultimately create a system that reduces trash buildup while at the same time providing enough useful gases to potentially fill a methane tank that could fuel a lunar ascent vehicle or other deep space mission.

Draft national health policy 2015: A critical appraisal.

PubMed

Ahmed, Faruque U

2016-01-01

Revising a health policy of any country is a periodic procedure dependent on the change of demographic profile, current health status of the population including epidemiological changes in disease prevalence pattern, and progress made under the earlier policies. Along with it, newer research revelation of the natural history of the existing and emerging health problems, availability of newer technology as well as changing sociopolitical commitment to improve the health status of the population are the driving forces in the change of policy. Draft National Health Policy (NHP) 2015 is an attempt for the same. A review of the draft has been undertaken. The chapter on introduction is crisp and clear. Situation analysis of the draft is sketchy and without any reference of sources. Shifting the health goal is without any basis, and the objectives defined for the policy change are incongruous with the introduction. A detailed description does not give a clear picture but rather confuses the reader as it talks of comprehensive universal health-care services to be provided with a holistic concept but maximum emphasis is made in the implementation of a national program. Private health-care services are an area to reckon but except for mere references on the involvement in private-public mode, nothing concrete is observed, especially in the primary care level. Involvement envisaged in the secondary and tertiary levels is nebulous. The implementation health insurance program as well as regulatory mechanISM with the existing is also not defined exclusively in the context of a newer health policy.

MBGD update 2015: microbial genome database for flexible ortholog analysis utilizing a diverse set of genomic data.

PubMed

Uchiyama, Ikuo; Mihara, Motohiro; Nishide, Hiroyo; Chiba, Hirokazu

2015-01-01

The microbial genome database for comparative analysis (MBGD) (available at http://mbgd.genome.ad.jp/) is a comprehensive ortholog database for flexible comparative analysis of microbial genomes, where the users are allowed to create an ortholog table among any specified set of organisms. Because of the rapid increase in microbial genome data owing to the next-generation sequencing technology, it becomes increasingly challenging to maintain high-quality orthology relationships while allowing the users to incorporate the latest genomic data available into an analysis. Because many of the recently accumulating genomic data are draft genome sequences for which some complete genome sequences of the same or closely related species are available, MBGD now stores draft genome data and allows the users to incorporate them into a user-specific ortholog database using the MyMBGD functionality. In this function, draft genome data are incorporated into an existing ortholog table created only from the complete genome data in an incremental manner to prevent low-quality draft data from affecting clustering results. In addition, to provide high-quality orthology relationships, the standard ortholog table containing all the representative genomes, which is first created by the rapid classification program DomClust, is now refined using DomRefine, a recently developed program for improving domain-level clustering using multiple sequence alignment information. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Northwest Manufacturing Initiative

DTIC Science & Technology

2012-03-27

crack growth and threshold stress corrosion cracking evaluation. Threshold stress corrosion cracking was done using the rising step load method with...Group Technology methods to establish manufacturing cells for production efficiency, to develop internal Lean Champions, and to implement rapid... different levels, advisory, core, etc. VI. Core steering committee composed of members that have a significant vested interest. Action Item: Draft

National evaluation of the SafeTrip-21 initiative : California connected traveler test bed, draft evaluation report : networked traveler-transit/smart parking.

DOT National Transportation Integrated Search

2010-11-10

Through the U.S. Department of Transportations (USDOT) SafeTrip-21 initiative, the USDOT is testing a variety of technologies in a number of locations in California as well as along the I-95 corridor on the east coast. This document presents the e...

75 FR 82413 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... technology? A copy of the draft supporting statement may be viewed free of charge at the NRC Public Document... and search for Docket No. NRC-2010-0347. Mail comments to NRC Clearance Officer, Tremaine Donnell (T-5.... Nuclear Regulatory Commission, Washington, DC 20555-0001, by telephone at 301- 415-6258, or by e-mail to...

National evaluation of the SafeTrip-21 initiative : California Connected Traveler test bed, draft evaluation report: networked traveler--transit/smart parking.

DOT National Transportation Integrated Search

2010-12-10

Through the U.S. Department of Transportations (USDOT) SafeTrip-21 initiative, the USDOT is testing a variety of technologies in a number of locations in California as well as along the I-95 corridor on the east coast. This document presents the e...

Len Gen: The international lentil genome sequencing project

USDA-ARS?s Scientific Manuscript database

We have been sequencing CDC Redberry using NGS of paired-end and mate-pair libraries over a wide range of sizes and technologies. The most recent draft (v0.7) of approximately 150x coverage produced scaffolds covering over half the genome (2.7 Gb of the expected 4.3 Gb). Long reads from PacBio sequ...

Drafting a Customized Tech Plan: Throw out Yesterday's Creaky Model

ERIC Educational Resources Information Center

Solomon, Gwen

2004-01-01

Today, states and districts are zeroing in on standards-based learning and high stakes test scores--even benchmarking results in advance of the school year. Technology planning is--or should be--a key part of any such learning design. With careful planning for integration districts can be helped to more successfully address standards and, in…

76 FR 24924 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, Room O-1F21, One White Flint North, 11555...://www.nrc.gov/public-involve/doc-comment/omb/index.html . The document will be available on the NRC home...

77 FR 48131 - Draft Finding of No Significant Impact and Programmatic Environmental Assessment for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... consumption of freshwater resources and returning water back to the same watershed so as not to deplete the groundwater and surface water resources of that region in quantity or quality; and (3) Reducing, reusing, and... and behavior as well as multiple possible projects and technologies to enhance resource efficiency...

Draft Final Risk Assessment Lime Settling Basins. Version 2.1

DTIC Science & Technology

1990-10-25

TABLE OF CON "S Section Page EXECUTIVE SUMMARY ...................................... v 1.0 INTRODUCTION ..................................... 1 - 1 1.1...BACKGROUND AND RATIONALE ........................ 1 - 1 1.2 SUMMARY OF APPROACH ............................. 1 -3 1.3 REPORT FORMAT... 1 -4 2.0 SITE DESCRIPTION AND HISTORY ......................... 2- 1 3.0 PREFERRED ALTERNATIVE INTERIM ACTION TECHNOLOGY ..... 3- 1 4.0

77 FR 51067 - Investigations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

.... Brockport, PA...... 08/06/12 08/03/12 (Union). 81863 Industrial Machine & Farmington, MO..... 08/07/12 08/07... Industrial Sales (Workers). 81865 Sihi Pumps (Workers).... Grand Island, NY... 08/07/12 07/31/12 81866 Acme... Custom Technology, Windsor, CT........ 08/09/12 08/09/12 Inc., Engineering Design and Drafting Department...

Writing in the Park: Inquiry into Urban Youths' Place-Based Digital Writing Processes

ERIC Educational Resources Information Center

Silva, Bethany

2017-01-01

Theories of writing process have informed the teaching of writing for the past forty years, providing writing mentors with a language of prewriting, drafting, revising, editing, and publishing that broadens ways to invite young writers to approach composition. In the past forty years, new technologies for composition have impacted the products,…

75 FR 37975 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... technologies including induction and fluorescent lamps. 75 FR 22031, 22033 (April 27, 2010). In comments... of magnetic ballasts of 50,000 hours. After the 2003 draft report, Allegheny noted that MV ballast... considered only magnetic ballasts because they are the most common ballast used in HID lighting systems. DOE...

Environmental Quality Technology Demonstration, Evaluation and Transfer Activities

DTIC Science & Technology

1996-12-02

and Appropriate Requirements) and ARAR support documentation for interim and final Installation Restoration Program (IRP) remedial actions . During the...Relevant and Appropriate Requirements (ARARs) for Fort Devens , Massachusetts. Delivered Federal Environmental Legislative Power Curve in hard copy and... Remedial Actions . Delivered revised tables for Desk Guide on Interpretation of Applicable or Relevant and Appropriate Requirements — Interim Draft

Space shuttle propulsion systems on-board checkout and monitoring system development study

NASA Technical Reports Server (NTRS)

1971-01-01

Investigations on the fundamental space shuttle propulsion systems program are reported, with emphasis on in-depth reviews of preliminary drafts of the guidelines. The guidelines will be used to incorporate the onboard checkout and monitoring function into the basic design of the propulsion systems and associated interfacing systems. The analysis of checkout and monitoring requirements of the Titan 3 L expandable booster propulsion systems was completed, and the techniques for accomplishing the checkout and monitoring functions were determined. Updating results of the basic study of propulsion system checkout and monitoring is continuing.

KSC-2013-3161

NASA Image and Video Library

2013-08-01

CAPE CANAVERAL, Fla. - Ed Mango, manager of NASA's Commercial Crew Program, or CCP, talks to media following the Commercial Crew Transportation Capability, or CCtCap, Pre-Proposal Conference at Kennedy Space Center in Florida. CCtCap will be the next phase of certification efforts for CCP mission to the International Space Station. The purpose of the conference was to involve aerospace industry representatives in the CCtCap draft Request for Proposal, or RFP, process and provide a greater understanding for both parties before the official RFP is released in the fall of 2013. To learn more about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Jim Grossmann

KSC-2013-3155

NASA Image and Video Library

2013-08-01

CAPE CANAVERAL, Fla. - NASA Kennedy Space Center Director Bob Cabana welcomes aerospace industry representatives to the Commercial Crew Transportation Capability, or CCtCap, Pre-Proposal Conference. CCtCap will be the next phase of certification efforts for the agency's Commercial Crew Program, or CCP, missions to the International Space Station. The purpose of the conference was to involve industry in the CCtCap draft Request for Proposal, or RFP, process and provide a greater understanding for both parties before the official RFP is released in the fall of 2013. To learn more about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Jim Grossmann

KSC-2013-3159

NASA Image and Video Library

2013-08-01

CAPE CANAVERAL, Fla. - Panelists of the Commercial Crew Transportation Capability, or CCtCap, Pre-Proposal Conference at Kennedy Space Center in Florida are, from left, Maria Collura, Brian Hinerth, Trip Healy and Lee Pagel. CCtCap will be the next phase of certification efforts for CCP mission to the International Space Station. The purpose of the conference was to involve aerospace industry representatives in the CCtCap draft Request for Proposal, or RFP, process and provide a greater understanding for both parties before the official RFP is released in the fall of 2013. To learn more about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Jim Grossmann

KSC-2013-3158

NASA Image and Video Library

2013-08-01

CAPE CANAVERAL, Fla. - Ed Mango, manager of NASA's Commercial Crew Program, or CCP, makes opening remarks at the Commercial Crew Transportation Capability, or CCtCap, Pre-Proposal Conference at Kennedy Space Center in Florida. CCtCap will be the next phase of certification efforts for CCP mission to the International Space Station. The purpose of the conference was to involve aerospace industry representatives in the CCtCap draft Request for Proposal, or RFP, process and provide a greater understanding for both parties before the official RFP is released in the fall of 2013. To learn more about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Jim Grossmann

KSC-2013-3157

NASA Image and Video Library

2013-08-01

CAPE CANAVERAL, Fla. - Ed Mango, manager of NASA's Commercial Crew Program, or CCP, makes opening remarks at the Commercial Crew Transportation Capability, or CCtCap, Pre-Proposal Conference at Kennedy Space Center in Florida. CCtCap will be the next phase of certification efforts for CCP mission to the International Space Station. The purpose of the conference was to involve aerospace industry representatives in the CCtCap draft Request for Proposal, or RFP, process and provide a greater understanding for both parties before the official RFP is released in the fall of 2013. To learn more about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Jim Grossmann

Proposed Activities to Address Regulatory Gaps and Challenges for Licensing Advanced Reactors Using Seismic Isolation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh; Kammerer, Annie M.; Whittaker, Andrew S.

Over the last decade, particularly since implementation of the certified design regulatory approaches outlined in 10 CFR 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” interest has been increasing in the use of seismic isolation (SI) technology to support seismic safety in nuclear facilities. In 2009, the United States (U.S.) Nuclear Regulatory Commission (NRC) initiated research activities to develop new guidance targeted at isolated facilities because SI is being considered for nuclear power plants in the U.S. One product of that research, which was developed around a risk-informed regulatory approach, is a draft NRC NUREG series (NUREG/CR) report thatmore » investigates and discusses considerations for use of SI in otherwise traditionally founded large light water reactors (LWRs). A coordinated effort led to new provisions for SI of LWRs in the American Society of Civil Engineers standard ASCE/SEI 4-16, “Seismic Analysis of Safety Related Nuclear Structures.” The risk-informed design philosophy that underpinned development of the technical basis for these documents led to a set of proposed performance objectives and acceptance criteria intended to serve as the foundation for future NRC guidance on the use of SI and related technology. Although the guidance provided in the draft SI NUREG/CR report and ASCE/SEI 4 16 provides a sound basis for further development of nuclear power plant designs incorporating SI, these initial documents were focused on surface-founded or near-surface-founded LWRs and were, necessarily, limited in scope. For example, there is limited information in both the draft NUREG/CR report and ASCE/SEI 4-16 related to nonlinear analysis of soil-structure systems for deeply-embedded reactors, the isolation of components, and the use of vertical isolation systems. Also not included in the draft SI NUREG/CR report are special considerations for licensing of isolated facilities using the certified design approach in 10 CFR 52 and a detailed discussion of seismic probabilistic risk assessments for isolated facilities.« less

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 10: Computer-Aided Drafting & Design, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Solar Electric Propulsion (SEP) Systems for SMD Mission Needs. Technology Infusion Study.

NASA Technical Reports Server (NTRS)

Anderson, David

2014-01-01

Two presentations for SBAG and OPAG meetings: 1) Solar Electric Propulsion Systems for SMD Missions, and 2) Technology Infusion Study - Draft Findings Recommendation Small Bodies Assessment Group (SBAG) meeting is January 9th in Washington D.C., and the Outer Planets Assessment Group (OPAG) meeting is January 23-14 in Tucson, AZ. NASA sponsors these assessment groups, through the NRC, for the science community to assess and provide advice. These talks are to provide a status of 2 NASA activities, and to seek feedback from the respective science communities.

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

Cyber Gray Space Deterrence

DTIC Science & Technology

2017-12-21

the South China Sea or Eastern Ukraine, but they may cause more damage to U.S. economic and national security interests. Administration officials...cyberattacks to undermine U.S. economic and military security. Reports and strategies have been worried over but then ignored, and draft legislation...would not, for instance, be a great innovation for the United States to threaten economic sanctions against a state attacking through cyberspace. Thus

Determination of suitable climate space for Armillaria ostoyae in the Oregon East Cascades

Treesearch

John W. Hanna; Mee-Sook Kim; Ned B. Klopfenstein; Aaron L. Smith; Helen M. Maffei

2008-01-01

This is a preliminary, draft outline for organizing information on the relation of climate to western forest diseases. The question is how to assess the threat of these diseases under a regime of climate change. Although forest diseases are often important, assessment of disease-climate relations is a challenging problem due to the multiple values at risk and the...

The United Nations contribution towards an international agreement on remote sensing

NASA Technical Reports Server (NTRS)

Menter, M.

1976-01-01

The recommendations of the Legal Subcommittee of the United Nations committee for the Peaceful Uses of Space concerning satellite remote sensing are considered. Detailed studies of the Scientific and Technical Subcommittee of this committee are discussed with emphasis on three draft proposals submitted to it on remote sensing by (1) France and the USSR, (2) Latin American countries, and (3) the United States.

Ultralightweight Fresnel Lens Solar Concentrators for Space Power

NASA Technical Reports Server (NTRS)

ONeill, M. J.; McDanal, A. J.

2000-01-01

The first phase of this project was completed in March 2000, and included the successful technology demonstration of a new ultralightweight photovoltaic concentrator array at the fully functional panel level. The new array is called the Stretched Lens Aurora (SLA) array, and uses deployable, flexible, thin-film silicone rubber Fresnel lenses to focus sunlight onto high efficiency multijunction solar cells, which are mounted to a composite radiator surface for waste heat dissipation. A prototype panel was delivered to NASA Marshall in March 2000, and comprised four side-by-side lenses focussing sunlight onto four side-by-side photovoltaic receivers. This prototype panel was tested by NASA Glenn prior to delivery to NASA Marshall. The best of the four lens/receiver modules achieved 27.4% efficiency at room temperature in the NASA Glenn solar simulator tests. This performance equates to 375 W/sq.m. areal power and 378 W/kg specific power at the fully functional panel level. We believe this to be the first space solar array of any kind to simulataneously meet the two long-standing NASA goals of 300 W/sq.m. and 300 W/kg at the functional panel level. Key results for the first phase of the program have been documented by ENTECH in a Draft Final Technical Report, which is presently being reviewed by NASA, and which should be published in the near future.

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

Draft Genome Sequence, and a Sequence-Defined Genetic Linkage Map of the Legume Crop Species Lupinus angustifolius L

PubMed Central

Zheng, Zequn; Zhang, Qisen; Zhou, Gaofeng; Sweetingham, Mark W.; Howieson, John G.; Li, Chengdao

2013-01-01

Lupin (Lupinus angustifolius L.) is the most recently domesticated crop in major agricultural cultivation. Its seeds are high in protein and dietary fibre, but low in oil and starch. Medical and dietetic studies have shown that consuming lupin-enriched food has significant health benefits. We report the draft assembly from a whole genome shotgun sequencing dataset for this legume species with 26.9x coverage of the genome, which is predicted to contain 57,807 genes. Analysis of the annotated genes with metabolic pathways provided a partial understanding of some key features of lupin, such as the amino acid profile of storage proteins in seeds. Furthermore, we applied the NGS-based RAD-sequencing technology to obtain 8,244 sequence-defined markers for anchoring the genomic sequences. A total of 4,214 scaffolds from the genome sequence assembly were aligned into the genetic map. The combination of the draft assembly and a sequence-defined genetic map made it possible to locate and study functional genes of agronomic interest. The identification of co-segregating SNP markers, scaffold sequences and gene annotation facilitated the identification of a candidate R gene associated with resistance to the major lupin disease anthracnose. We demonstrated that the combination of medium-depth genome sequencing and a high-density genetic linkage map by application of NGS technology is a cost-effective approach to generating genome sequence data and a large number of molecular markers to study the genomics, genetics and functional genes of lupin, and to apply them to molecular plant breeding. This strategy does not require prior genome knowledge, which potentiates its application to a wide range of non-model species. PMID:23734219

Draft genome sequence, and a sequence-defined genetic linkage map of the legume crop species Lupinus angustifolius L.

PubMed

Yang, Huaan; Tao, Ye; Zheng, Zequn; Zhang, Qisen; Zhou, Gaofeng; Sweetingham, Mark W; Howieson, John G; Li, Chengdao

2013-01-01

Lupin (Lupinus angustifolius L.) is the most recently domesticated crop in major agricultural cultivation. Its seeds are high in protein and dietary fibre, but low in oil and starch. Medical and dietetic studies have shown that consuming lupin-enriched food has significant health benefits. We report the draft assembly from a whole genome shotgun sequencing dataset for this legume species with 26.9x coverage of the genome, which is predicted to contain 57,807 genes. Analysis of the annotated genes with metabolic pathways provided a partial understanding of some key features of lupin, such as the amino acid profile of storage proteins in seeds. Furthermore, we applied the NGS-based RAD-sequencing technology to obtain 8,244 sequence-defined markers for anchoring the genomic sequences. A total of 4,214 scaffolds from the genome sequence assembly were aligned into the genetic map. The combination of the draft assembly and a sequence-defined genetic map made it possible to locate and study functional genes of agronomic interest. The identification of co-segregating SNP markers, scaffold sequences and gene annotation facilitated the identification of a candidate R gene associated with resistance to the major lupin disease anthracnose. We demonstrated that the combination of medium-depth genome sequencing and a high-density genetic linkage map by application of NGS technology is a cost-effective approach to generating genome sequence data and a large number of molecular markers to study the genomics, genetics and functional genes of lupin, and to apply them to molecular plant breeding. This strategy does not require prior genome knowledge, which potentiates its application to a wide range of non-model species.

Drafting Fundamentals. Drafting Module 1. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. The guide contains a cross-reference table of instructional materials. Ten units cover drafting fundamentals: (1) introduction to drafting; (2) general safety;…

A reply from earth? - A proposed approach to developing a message from humankind to extraterrestrial intelligence after we detect them

NASA Technical Reports Server (NTRS)

Michaud, Michael; Billingham, John; Tarter, Jill

1990-01-01

The question of the formulation of a proper response to the detection of an extraterrestrial civilization is considered. It is proposed that an international agreement or declaration of principles establishing procedures enabling international participation in the making of such decisions be developed and that the SETI Committee of the International Academy of Aeronautics, in cooperation with other interested bodies, draft an agreement or declaration of principles that would set up these procedures; and that the draft be presented to the United Nations for consideration through the Committee on Peaceful Uses of Outer Space. A suggested outline of the agreement or declaration is presented and proposes that a response to the detection of extraterrestrial intelligence should be on behalf of all humankind; that this decision should be made by an appropriately representative international body; and that the content of the reply should reflect an international consensus.

A SOCIO-ECONOMIST LOOKS AT THE CURRENT VALUES AND CHANGING NEEDS OF YOUTH. FINAL DRAFT.

ERIC Educational Resources Information Center

THEOBALD, ROBERT

MAN HAS ACHIEVED THE POWER TO CREATE AN ENVIRONMENT SUITED TO HIS NEEDS. THIS POWER COMES FROM DEVELOPMENTS IN THE UTILIZATION OF ENERGY, ADVANCEMENTS IN CHEMISTRY, AN INCREASE IN SCIENTIFIC PROBLEM SOLVING ABILITY AND COMPUTER TECHNOLOGY. THESE SOURCES OF POWER RESULT IN THE DRIVE TOWARD THE DEVELOPMENT OF DESTRUCTIVE POWER, THE CAPABILITY OF…

The Technology of Unequal Rights for Women: Patent Drawings of a Voting Machine

ERIC Educational Resources Information Center

Hussey, Michael

2008-01-01

In 1878, Senator Aaron A. Sargent of California introduced to the Senate an amendment to the Constitution "Conferring upon Women the Right of Suffrage." Drafted by Susan B. Anthony, this same amendment would be introduced on a near-yearly basis until its final passage by Congress on May 19, 1919. Varying degrees of voting rights presented an…

78 FR 67348 - Invitation for Public Comment on Draft Test Plan for the High Burnup Dry Storage Cask Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... will be executed will be added when Dominion Virginia Power, who is part of the Electric Power research... Electric Power Research Institute (EPRI) to document what is planned to be accomplished by the CDP. DOE is... Storage Cask Research and Development Project (CDP) AGENCY: Fuel Cycle Technologies, Office of Nuclear...

76 FR 52972 - United States v. Regal Beloit Corp. and A.O. Smith Corp.; Proposed Final Judgment and Competitive...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... magnet technology, thereby allowing the motor to run more efficiently. 15. Motors sold for use in pool...-efficient motors because pool pumps typically run for many hours a day, sometimes even continuously. Pool... and fan blades are among the more difficult design aspects of furnace draft inducers. 51. Furnaces are...

Single-molecule sequencing of the desiccation-tolerant grass Oropetium thomaeum.

PubMed

VanBuren, Robert; Bryant, Doug; Edger, Patrick P; Tang, Haibao; Burgess, Diane; Challabathula, Dinakar; Spittle, Kristi; Hall, Richard; Gu, Jenny; Lyons, Eric; Freeling, Michael; Bartels, Dorothea; Ten Hallers, Boudewijn; Hastie, Alex; Michael, Todd P; Mockler, Todd C

2015-11-26

Plant genomes, and eukaryotic genomes in general, are typically repetitive, polyploid and heterozygous, which complicates genome assembly. The short read lengths of early Sanger and current next-generation sequencing platforms hinder assembly through complex repeat regions, and many draft and reference genomes are fragmented, lacking skewed GC and repetitive intergenic sequences, which are gaining importance due to projects like the Encyclopedia of DNA Elements (ENCODE). Here we report the whole-genome sequencing and assembly of the desiccation-tolerant grass Oropetium thomaeum. Using only single-molecule real-time sequencing, which generates long (>16 kilobases) reads with random errors, we assembled 99% (244 megabases) of the Oropetium genome into 625 contigs with an N50 length of 2.4 megabases. Oropetium is an example of a 'near-complete' draft genome which includes gapless coverage over gene space as well as intergenic sequences such as centromeres, telomeres, transposable elements and rRNA clusters that are typically unassembled in draft genomes. Oropetium has 28,466 protein-coding genes and 43% repeat sequences, yet with 30% more compact euchromatic regions it is the smallest known grass genome. The Oropetium genome demonstrates the utility of single-molecule real-time sequencing for assembling high-quality plant and other eukaryotic genomes, and serves as a valuable resource for the plant comparative genomics community.

Functional Drafting, Drafting--Intermediate: 9255.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course consists of six instructional blocks totaling 135 clock hours: (1) functional drafting, (2) threads and fasteners, (3) pictorial drawings, (4) introduction to electronic drafting, (5) introduction to piping drafting, and (6) Quinmester posttest. Mastery of skills indicated in Drafting-Basic--9255.01 is a prerequisite. In the functional…

76 FR 41808 - Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

...] Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric Delivery..., announce the availability of the draft environmental impact statement and the draft Oncor Electric Delivery... Oncor Electric Delivery Company, LLC (Applicant; Oncor), and (2) That the Applicant has developed a...

A Computer Model of Drafting Effects on Collective Behavior in Elite 10,000-m Runners.

PubMed

Trenchard, Hugh; Renfree, Andrew; Peters, Derek M

2017-03-01

Drafting in cycling influences collective behavior of pelotons. Although evidence for collective behavior in competitive running events exists, it is not clear if this results from energetic savings conferred by drafting. This study modeled the effects of drafting on behavior in elite 10,000-m runners. Using performance data from a men's elite 10,000-m track running event, computer simulations were constructed using Netlogo 5.1 to test the effects of 3 different drafting quantities on collective behavior: no drafting, drafting to 3 m behind with up to ~8% energy savings (a realistic running draft), and drafting up to 3 m behind with up to 38% energy savings (a realistic cycling draft). Three measures of collective behavior were analyzed in each condition: mean speed, mean group stretch (distance between first- and last-placed runner), and runner-convergence ratio (RCR), which represents the degree of drafting benefit obtained by the follower in a pair of coupled runners. Mean speeds were 6.32 ± 0.28, 5.57 ± 0.18, and 5.51 ± 0.13 m/s in the cycling-draft, runner-draft, and no-draft conditions, respectively (all P < .001). RCR was lower in the cycling-draft condition but did not differ between the other 2. Mean stretch did not differ between conditions. Collective behaviors observed in running events cannot be fully explained through energetic savings conferred by realistic drafting benefits. They may therefore result from other, possibly psychological, processes. The benefits or otherwise of engaging in such behavior are as yet unclear.

The Outer Space Treaty

NASA Astrophysics Data System (ADS)

Johnson, Christopher Daniel

2018-01-01

Negotiated at the United Nations and in force since 1967, the Outer Space Treaty has been ratified by over 100 countries and is the most important and foundational source of space law. The treaty, whose full title is "Treaty on Principles Governing the Activities of States in the Exploration and Use of Outer Space, Including the Moon and Other Celestial Bodies," governs all of humankind's activities in outer space, including activities on other celestial bodies and many activities on Earth related to outer space. All space exploration and human spaceflight, planetary sciences, and commercial uses of space—such as the global telecommunications industry and the use of space technologies such as position, navigation, and timing (PNT), take place against the backdrop of the general regulatory framework established in the Outer Space Treaty. A treaty is an international legal instrument which balances rights and obligations between states, and exists as a kind of mutual contract of shared understandings, rights, and responsibilities between them. Negotiated and drafted during the Cold War era of heightened political tensions, the Outer Space Treaty is largely the product of efforts by the United States and the USSR to agree on certain minimum standards and obligations to govern their competition in "conquering" space. Additionally, the Outer Space Treaty is similar to other treaties, including treaties governing the high seas, international airspace, and the Antarctic, all of which govern the behavior of states outside of their national borders. The treaty is brief in nature and only contains 17 articles, and is not comprehensive in addressing and regulating every possible scenario. The negotiating states knew that the Outer Space Treaty could only establish certain foundational concepts such as freedom of access, state responsibility and liability, non-weaponization of space, the treatment of astronauts in distress, and the prohibition of non-appropriation of celestial bodies. Subsequent treaties were to refine these concepts, and national space legislation was to incorporate the treaty's rights and obligations at the national level. While the treaty is the cornerstone in the regulation of activities in outer space, today the emergence of new issues that were not contemplated at the time of its creation, such as small satellites and megaconstellations, satellite servicing missions, the problem of space debris and the possibility of space debris removal, and the use of lunar and asteroid resources, all stretch the coherence and continuing adequacy of the treaty, and may occasion the need for new governance frameworks.

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

76 FR 57760 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Availability of Draft Resource Management Plan and Draft Environmental Impact Statement for the Colorado River... prepared a Draft Resource Management Plan (RMP) and Draft Environmental Impact Statement (EIS) for the... alternative) seeks to allocate limited resources among competing human interests, land uses, and conservation...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

76 FR 59732 - Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

...] Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric Delivery... availability of the draft environmental impact statement (DEIS) and the draft Oncor Electric Delivery Company... announced that Oncor Electric Delivery Company, LLC, has applied under section 10(a)(1)(B) of the Endangered...

Draft Environmental Impact Statement-Consolidated Space Operations Center.

DTIC Science & Technology

1980-10-01

about 10 in the human resonance (worst case) region of the electromagnetic spectrum. The USAF has a significant Radiofrequency Radiation (RFR...accessis necessary. I 3. Restrict all air traffic within 1000 feet of the antenna - field to avoid possible exposure of electroexplosive de- vices to...Permissible Exposure Level (MPEL) for occupational personnel is 10 mw/cm 2 and is based on past knowledge of radiofrequency radiation effects (Ref

Automatic draft reading based on image processing

NASA Astrophysics Data System (ADS)

Tsujii, Takahiro; Yoshida, Hiromi; Iiguni, Youji

2016-10-01

In marine transportation, a draft survey is a means to determine the quantity of bulk cargo. Automatic draft reading based on computer image processing has been proposed. However, the conventional draft mark segmentation may fail when the video sequence has many other regions than draft marks and a hull, and the estimated waterline is inherently higher than the true one. To solve these problems, we propose an automatic draft reading method that uses morphological operations to detect draft marks and estimate the waterline for every frame with Canny edge detection and a robust estimation. Moreover, we emulate surveyors' draft reading process for getting the understanding of a shipper and a receiver. In an experiment in a towing tank, the draft reading error of the proposed method was <1 cm, showing the advantage of the proposed method. It is also shown that accurate draft reading has been achieved in a real-world scene.

Drafting: Current Trends and Future Practices

ERIC Educational Resources Information Center

Jensen, C.

1976-01-01

Various research findings are reported on drafting trends which the author feels should be incorporated into teaching drafting: (1) true position and geometric tolerancing, (2) decimal and metric dimensioning, (3) functional drafting, (4) automated drafting, and (5) drawing reproductions. (BP)

Proceedings of the NASA Laboratory Astrophysics Workshop

NASA Technical Reports Server (NTRS)

Salama, Farid (Editor)

2002-01-01

This document is the proceedings of the NASA Laboratory Astrophysics Workshop, convened May 1-3, 2002 at NASA's Ames Research Center. Sponsored by the NASA Office of Space Science (OSS), this programmatic workshop is held periodically by NASA to discuss the current state of knowledge in the interdisciplinary field of laboratory astrophysics and to identify the science priorities (needs) in support of NASA's space missions. An important goal of the Workshop is to provide input to OSS in the form of a white paper for incorporation in its strategic planning. This report comprises a record of the complete proceedings of the Workshop and the Laboratory Astrophysics White Paper drafted at the Workshop.

Challenge To Apollo: The Soviet Union and The Space Race, 1945-1974

NASA Technical Reports Server (NTRS)

Siddiqi, Asif A.

2000-01-01

This book is, in essence, sixteen years in the making. First attempted to compile a history of the Soviet space program in 1982 author put together a rough chronology of the main events. A decade later, while living on a couch in a college friend's apartment, he began writing what would be a short history of the Soviet lunar landing program. The first draft was sixty-nine pages long. Late the following year, he decided to expand the topic to handle all early Soviet piloted exploration programs. That work eventually grew into what you are holding in your hand now.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document. Volume 1: Major trades. Book 1: Draft final

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents trade studies and reference concept designs accomplished during a study of Space Transfer Concepts and Analyses for Exploration Missions (STCAEM). This volume contains the major top level trades, level 2 trades conducted in support of NASA's Lunar/Mars Exploration Program Office, and a synopsis of the vehicles for different propulsion systems under trade consideration. The vehicles are presented in more detail in other volumes of this report. Book 1 of Volume 1 covers the following analyses: lunar/Mars commonality trades, lunar/Mars mission operations, and Mars transfer systems.

Proceedings of the Next Generation Exploration Conference

NASA Technical Reports Server (NTRS)

Schingler, Robbie (Editor); Lynch, Kennda

2006-01-01

The Next Generation Exploration Conference (NGEC) brought together the emerging next generation of space leaders over three intensive days of collaboration and planning. The participants extended the ongoing work of national space agencies to draft a common strategic framework for lunar exploration, to include other destinations in the solar system. NGEC is the first conference to bring together emerging leaders to comment on and contribute to these activities. The majority of the three-day conference looked beyond the moon and focused on the "next destination": Asteroids, Cis-Lunar, Earth 3.0, Mars Science and Exploration, Mars Settlement and Society, and Virtual Worlds and Virtual Exploration.

Draft Environmental Impact Statement (DEIS)

DTIC Science & Technology

2000-07-01

MCB Marine Corps Base MCCDC Marine Corps Combat Development Center MCHC Marine Corps Heritage Center MCHMD Marine Corps History and Museum...other federal agencies. In addition to the MCU, the base is the site of the Marine Corps Officer Candidate School (OCS), the Marine Corps Combat ...at the Air-Ground Museum to support instruction and research on combat doctrine, tactics, and technology. The Air-Ground Museum also loans items to

Numerical Control/Computer Aided Manufacturing (NC/CAM), A Descom Study

DTIC Science & Technology

1979-07-01

CAM machines operate directly from computers, but most get instructions in the form of punched tape. The applications of NC/CAM are virtually...Although most NC/CAM equipment is metal working, its applications include electronics manufacturing, glass making, food processing, materiel handling...drafting, woodworking, plastics and inspection, just to name a few. Numerical control, like most technologies, is an advancing and evolutionary process

Dynamically Stable Legged Locomotion

DTIC Science & Technology

1981-11-30

the laboratory. Harry Asada, Wayne Book, Nancy Cornelius, Sesh Murthy and Ivan Sutherland read various drafts of this report, for which we are...particularly helpful in providing an atmosphere where things could get started. Craig Fields and Clint Kelly deserve special credit for letting the idea of...legged technology capture their imaginations, even before we could show them tangible results. We are especially indebted to Ivan Sutherland for his

Special Advanced Studies for Pollution Prevention. Delivery Order 0058: The Monitor - Winter 2000

DTIC Science & Technology

2001-04-01

Burning/Open Detonation of Energetic Materials ➨Emission factors from a draft EPA report are incorporated into the guidance Site Restoration ➨Method...Aqueous Cleaner Recycle System Microfiltration Removes oil/grease & TSS from alkaline and acid cleaning baths Commodore Separation Technologies, Inc... Microfiltration Removes all heavy metals from wastewater and recycles water Infinity Chemicals Group Infinity Prep-L Deoxidizing Chemical

USSR Report, Science and Technology Policy.

DTIC Science & Technology

1987-05-28

rate on the basis of the priority allocation of capital investments in the technical retooling and reconstruction of existing production. Their...development, as well as in the drafting of proposals for reconstruction and for the creation of new capacities for series production. The comparison...of variants of reconstruction of an ore dressing combine, which was made in USSR Gosplan departments on the basis of the analysis of the efficiency

Space teleoperations technology for Space Station evolution

NASA Technical Reports Server (NTRS)

Reuter, Gerald J.

1990-01-01

Viewgraphs on space teleoperations technology for space station evolution are presented. Topics covered include: shuttle remote manipulator system; mobile servicing center functions; mobile servicing center technology; flight telerobotic servicer-telerobot; flight telerobotic servicer technology; technologies required for space station assembly; teleoperation applications; and technology needs for space station evolution.

Draft genome sequence of Escherichia coli ST977: A clinical multidrug-resistant strain harbouring blaNDM-3 isolated from a bloodstream infection.

PubMed

Li, Xi; Sun, Long; Zhu, Yongze; Shen, Mengyuan; Tu, Yuexing

2018-04-14

The emergence of carbapenem-resistant Escherichia coli has become a serious challenge to manage in the clinic because of multidrug resistance. Here we report the draft genome sequence of NDM-3-producing E. coli strain NT1 isolated from a bloodstream infection in China. Whole genomic DNA of E. coli strain NT1 was extracted and was sequenced using an Illumina HiSeq™ X Ten platform. The generated sequence reads were assembled using CLC Genomics Workbench. The draft genome was annotated using Rapid Annotation using Subsystem Technology (RAST). Bioinformatics analysis was further performed. The genome size was calculated at 5,353 620bp, with 5297 protein-coding sequences and the presence of genes conferring resistance to aminoglycosides, β-lactams, quinolones, macrolides, phenicols, sulphonamides, tetracycline and trimethoprim. In addition, genes encoding virulence factors were also identified. To our knowledge, this is the first report of an E. coli strain producing NDM-3 isolated from a human bloodstream infection. The genome sequence will provide valuable information to understand antibiotic resistance mechanisms and pathogenic mechanisms in this strain. Close surveillance is urgently needed to monitor the spread of NDM-3-producing isolates. Copyright © 2018 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

How to Develop Electrochemistry SETS-Based Interactive E-Book?

NASA Astrophysics Data System (ADS)

Munawwarah, M.; Anwar, S.; Sunarya, Y.

2017-09-01

This study aims to develop SETS-based interactive e-book teaching material through 4S TMD methode. The research methode in this study is the Development Research (RD) Richey and Klein that consists of design, phase, and evaluation. The design step was to analyze and plan the types of teaching materials instructional developed. There are 12 indicators from 3 standard competences that produced in selection step based new curriculum, the compatibility subject matter and indicators, and the relations between value and subject matter. Structuring steps yield concept map, macro structure, and multiple representation that were arranged to be first draft of teaching material that was used for develop the instruments for characterization step. Chatacterization test have been done to students in 12nd grades with 68 texts. Characterization results indicated that there were some texts included to difficult text. Difficult texts have been reduced with the ways back to qualitative steps and particulation. The second draft of teaching material was arranged based the results of didactic reduction of difficult texts. This draft was used for arranged interactive e-book. The characteristics of this SETS-based interactive e-book that developed were mention about the connection between science with environment, technology, and society. This interactive e-book consists of animation, task, and quizes that taken the interaction of students directly.

A high-coverage draft genome of the mycalesine butterfly Bicyclus anynana.

PubMed

Nowell, Reuben W; Elsworth, Ben; Oostra, Vicencio; Zwaan, Bas J; Wheat, Christopher W; Saastamoinen, Marjo; Saccheri, Ilik J; Van't Hof, Arjen E; Wasik, Bethany R; Connahs, Heidi; Aslam, Muhammad L; Kumar, Sujai; Challis, Richard J; Monteiro, Antónia; Brakefield, Paul M; Blaxter, Mark

2017-07-01

The mycalesine butterfly Bicyclus anynana, the "Squinting bush brown," is a model organism in the study of lepidopteran ecology, development, and evolution. Here, we present a draft genome sequence for B. anynana to serve as a genomics resource for current and future studies of this important model species. Seven libraries with insert sizes ranging from 350 bp to 20 kb were constructed using DNA from an inbred female and sequenced using both Illumina and PacBio technology; 128 Gb of raw Illumina data was filtered to 124 Gb and assembled to a final size of 475 Mb (∼×260 assembly coverage). Contigs were scaffolded using mate-pair, transcriptome, and PacBio data into 10 800 sequences with an N50 of 638 kb (longest scaffold 5 Mb). The genome is comprised of 26% repetitive elements and encodes a total of 22 642 predicted protein-coding genes. Recovery of a BUSCO set of core metazoan genes was almost complete (98%). Overall, these metrics compare well with other recently published lepidopteran genomes. We report a high-quality draft genome sequence for Bicyclus anynana. The genome assembly and annotated gene models are available at LepBase (http://ensembl.lepbase.org/index.html). © The Authors 2017. Published by Oxford University Press.

A high-coverage draft genome of the mycalesine butterfly Bicyclus anynana

PubMed Central

Elsworth, Ben; Oostra, Vicencio; Zwaan, Bas J.; Wheat, Christopher W.; Saastamoinen, Marjo; Saccheri, Ilik J.; van’t Hof, Arjen E.; Wasik, Bethany R.; Connahs, Heidi; Aslam, Muhammad L.; Kumar, Sujai; Challis, Richard J.; Monteiro, Antónia; Brakefield, Paul M.

2017-01-01

Abstract The mycalesine butterfly Bicyclus anynana, the “Squinting bush brown,” is a model organism in the study of lepidopteran ecology, development, and evolution. Here, we present a draft genome sequence for B. anynana to serve as a genomics resource for current and future studies of this important model species. Seven libraries with insert sizes ranging from 350 bp to 20 kb were constructed using DNA from an inbred female and sequenced using both Illumina and PacBio technology; 128 Gb of raw Illumina data was filtered to 124 Gb and assembled to a final size of 475 Mb (∼×260 assembly coverage). Contigs were scaffolded using mate-pair, transcriptome, and PacBio data into 10 800 sequences with an N50 of 638 kb (longest scaffold 5 Mb). The genome is comprised of 26% repetitive elements and encodes a total of 22 642 predicted protein-coding genes. Recovery of a BUSCO set of core metazoan genes was almost complete (98%). Overall, these metrics compare well with other recently published lepidopteran genomes. We report a high-quality draft genome sequence for Bicyclus anynana. The genome assembly and annotated gene models are available at LepBase (http://ensembl.lepbase.org/index.html). PMID:28486658

Can in Space-Status and Future after ECSS-E-ST-50-15C Release

NASA Astrophysics Data System (ADS)

Taylor, Chris; Furano, Gianluca; Valverde-Carretero, Alberto; Marinis, Kostas; Magistrati, Giorgio; Bolognino, Luca; Richard Jansen, King Lam; Caramia, Maurizio; Grau Llovera, Angel; Dalenq, Jean; Vinet, Francois

2015-09-01

Nowadays Controller Area Network (CAN) Bus is used more and more in spacecraft onboard applications. It has already been successfully used in many missions (ATV, SMART-1, MATROSHKA, SSTL Satellites, SENTINEL-2 etc.), will soon be the the main onboard communications bus for the EXOMars Mission and in will enable extended capabilities on future European Telecom palatforms. CAN Bus provides numerous advantages (robust, low cost, low power consumption, European, etc.). Thanks to its wide acceptance in the commercial market, numerous development tools are available that support and reduce the cost of all the engineering process, from specifications and design to the final assembly, integration and tests. Since 2009, ESA-ESTEC established an ESA-Industry Working Group on CAN Bus, in order to identify the main issues for its use in space applications and drive research and development. This long process has finally provided as output an ECSS standard and a set of building blocks that fully enable deployment of CAN bus for platform and payload use in all classes of space missions. The EXOMars project team has spearheaded these efforts, taking as reference the draft guidelines, and has taken into account the particularities of the EXOMars mission requirements, in order to provide a consistent methodology for the development of the multiple units that need to interface with the CAN Bus. The selection of CANOpen as preferred higher layer protocol for CAN in space application is due to the experience and hindsight developed during this long and sometimes not linear process. Two notable efforts were the development of an hardware support layer (the CCIPC IP core) for the CANOpen protocol and the qualification of three rad hard transceivers compliant with CAN commercial ISO physical standard. The CCIPC development has been performed concurrently with the ECSS-E-50-15C standardization activities. This approach has allowed the constant monitoring of the adopted IP core design solution by the ECSS Working Group. The first flight of the CCIPC is foreseen in 2016 with the EXOMARS Entry Descent and Landing Demonstrator Module. This paper will focus on the implementation of CAN Bus for all the future sapce DHSs, both on the technical aspects of physical layer selection, particularities of the higher layer protocol, etc. and on the methodology aspects related to the procurement of multiple heterogeneous units that are required to provide a standard interface to the Bus. Finally, a critical review of the current CAN Bus draft ECSS standard will be presented, based on advantages and difficulties encountered in the application of the current draft standard in the ongoing space applications.

The Evolving Florida Science Standards for K-12 Geocience - An Overview, Journey, Trials, and Tribulations

NASA Astrophysics Data System (ADS)

Ruscher, P. H.

2008-05-01

Introduction This paper will discuss the process that went into the development of new teacher standards for Florida's K-12 science benchmarks over 2007-2008. Florida developed its first set of science standards at about the same time that the National Science Education Standards debuted, in the mid-1990s, and the two documents produced had little in common with other, particularly with regard to controversial issue of evolution, and was also quite weak in the treatment of earth/space (or geoscience) content expectations. The process created panels of Framers and Writers (with much overlap) and led to the creation of a draft set of documents in the fall of 2007 after much electronic and face-to-face collaboration at several meetings. The public was then invited to comment on the draft, and the comments came fast and furious (some really were, in fact, furious). But most were highly complementary, and external professional reviewers lauded the changes from Florida's existing "mile-wide, inch-deep" standards to a much more reasonable core group of standards. Over a 60-day period, over 20,000 individual comments were submitted, and over 100,000 numerical ratings (on a 5 point scale) were entered. In January 2008, these comments were reviewed and that culminated in a final draft of the standards, presented to the State Department of Education and its Commissioner, in late January. The process became fraught with political pressures late, however, as anti-evolutionists led an assault on some aspects of the Life Sciences standards, which had repercussions in particular related to fossil evidence in the Earth/Space Science standards, The talk will summarize the process of evolution that this forced the standards to undergo. Nature of Science There is an expanded section of Nature of Science benchmarks and standards that are based on over twenty years of research in science education that cut across all standard areas (life, physical, and earth/space). This body of knowledge exists at all levels from kindergarten to 12th grade, and serves to assure that science is inquiry-based, if not directly experientially-based, encourages laboratory and field work in science, and serves to elevate science teaching. Impacts on the Florida Science FCAT (Florida Comprehensive Assessment Test) will also be discussed. Geoscience Components Our efforts concentrated on all aspects of Earth/Space Science, including astronomy, cosmology, hydrology, geology, climatology, meteorology, and oceanography (and various other sub-disciplines one could name). We include societal impacts such as the impact of the space program on Florida, disaster mitigation and preparation, and resource utilization. Linkages to physical and life sciences are explicit, allowing for the creation of new crosscutting curricula that might provide interesting new challenges for implementers at the district (e.g., county) level.

A post-assembly genome-improvement toolkit (PAGIT) to obtain annotated genomes from contigs.

PubMed

Swain, Martin T; Tsai, Isheng J; Assefa, Samual A; Newbold, Chris; Berriman, Matthew; Otto, Thomas D

2012-06-07

Genome projects now produce draft assemblies within weeks owing to advanced high-throughput sequencing technologies. For milestone projects such as Escherichia coli or Homo sapiens, teams of scientists were employed to manually curate and finish these genomes to a high standard. Nowadays, this is not feasible for most projects, and the quality of genomes is generally of a much lower standard. This protocol describes software (PAGIT) that is used to improve the quality of draft genomes. It offers flexible functionality to close gaps in scaffolds, correct base errors in the consensus sequence and exploit reference genomes (if available) in order to improve scaffolding and generating annotations. The protocol is most accessible for bacterial and small eukaryotic genomes (up to 300 Mb), such as pathogenic bacteria, malaria and parasitic worms. Applying PAGIT to an E. coli assembly takes ∼24 h: it doubles the average contig size and annotates over 4,300 gene models.

Draft genome sequence of Bradyrhizobium sp. strain BR 3262, an effective microsymbiont recommended for cowpea inoculation in Brazil.

PubMed

Simões-Araújo, Jean Luiz; Leite, Jakson; Marie Rouws, Luc Felicianus; Passos, Samuel Ribeiro; Xavier, Gustavo Ribeiro; Rumjanek, Norma Gouvêa; Zilli, Jerri Édson

The strain BR 3262 was isolated from nodule of cowpea (Vigna unguiculata L. Walp) growing in soil of the Atlantic Forest area in Brazil and it is reported as an efficient nitrogen fixing bacterium associated to cowpea. Firstly, this strain was assigned as Bradyrhizobium elkanii, however, recently a more detailed genetic and molecular characterization has indicated it could be a Bradyrhizobium pachyrhizi species. We report here the draft genome sequence of B. pachyrhizi strain BR 3262, an elite bacterium used as inoculant for cowpea. The whole genome with 116 scaffolds, 8,965,178bp and 63.8% of C+G content for BR 3262 was obtained using Illumina MiSeq sequencing technology. Annotation was added by the RAST prokaryotic genome annotation service and shown 8369 coding sequences, 52 RNAs genes, classified in 504 subsystems. Published by Elsevier Editora Ltda.

Spiral optical designs for nonimaging applications

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan; Buljan, Marina

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Spiral nonimaging optical designs

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Novel freeform optical surface design with spiral symmetry

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. These restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern when dealing with optical design. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. The general designing procedure will be described in detail.

Religious perspectives on the nuclear weapons debate: excerpts from the bishops' pastoral letter on war and peace, proposed third draft

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The text of the third draft, issued in April 1983 and approved by the bishops on 3 May 1983, focuses on the morality of the use of nuclear weapons in a first strike, the threat to use them, and their use as a deterrent to war, but it also includes discussions of the just war theory, nonviolence, and peacemaking. Viewed in the context of the traditional modes of accommodation between religion and the state, and in the light of contemporary disharmony between more fundamentalist sects and modern science, the document affords an interesting point for discussion of the moral basesmore » of the uses of technology. More than simply a dogmatic statement of one religious organization, the pastoral letter represents a vigorous new current in moral discretion and responsibility. 114 references.« less

The elderly in the shopping centers: the usability study of semipublic spaces as attractiveness generator.

PubMed

Bittencourt, Maria Cristina; do Valle Pereira, Vera Lúcia Duarte; Pacheco, Waldemar

2012-01-01

This article aims to study the importance of the attributes of usability and attractiveness for the semi-public spaces of Shopping Centers considering the elderly users, the psycho-cognitive and bio-physiological changes resulting from the aging process, as well as their expectations of the built space. Through a qualitative study of theoretical review with a multidisciplinary focus in architecture, ergonomics, gerontology, environmental psychology and management, the conditions of the elderly users were identified, and also the attributes related to usability and attractiveness, collected in order to understand and organize their interrelationships, to suggest recommendations about the drafting of Shopping Centers, aiming to generate projects and environments that should promote the efficient and satisfactory use for elderly and may also create a competitive advantage for these enterprises.

The use of player physical and technical skill match activity profiles to predict position in the Australian Football League draft.

PubMed

Woods, Carl T; Veale, James P; Collier, Neil; Robertson, Sam

2017-02-01

This study investigated the extent to which position in the Australian Football League (AFL) national draft is associated with individual game performance metrics. Physical/technical skill performance metrics were collated from all participants in the 2014 national under 18 (U18) championships (18 games) drafted into the AFL (n = 65; 17.8 ± 0.5 y); 232 observations. Players were subdivided into draft position (ranked 1-65) and then draft round (1-4). Here, earlier draft selection (i.e., closer to 1) reflects a more desirable player. Microtechnology and a commercial provider facilitated the quantification of individual game performance metrics (n = 16). Linear mixed models were fitted to data, modelling the extent to which draft position was associated with these metrics. Draft position in the first/second round was negatively associated with "contested possessions" and "contested marks", respectively. Physical performance metrics were positively associated with draft position in these rounds. Correlations weakened for the third/fourth rounds. Contested possessions/marks were associated with an earlier draft selection. Physical performance metrics were associated with a later draft selection. Recruiters change the type of U18 player they draft as the selection pool reduces. juniors with contested skill appear prioritised.

Comments from the Developmental Neurotoxicology Committee of the Japanese Teratology Society on the OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426, Developmental Neurotoxicity Study, Draft Document (October 2006 version), and on the Draft Document of the Retrospective Performance Assessment of the Draft Test Guideline 426 on Developmental Neurotoxicity.

PubMed

Ema, Makoto; Fukui, Yoshihiro; Aoyama, Hiroaki; Fujiwara, Michio; Fuji, Junichiro; Inouye, Minoru; Iwase, Takayuki; Kihara, Takahide; Oi, Akihide; Otani, Hiroki; Shinomiya, Mitsuhiro; Sugioka, Kozo; Yamano, Tsunekazu; Yamashita, Keisuke H; Tanimura, Takashi

2007-06-01

In October 2006, a new revision of the draft guideline (OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426. Developmental Neurotoxicity Study) and Draft Document of the Retrospective Performance Assessment (RPA) of the Draft Test Guideline 426 on Developmental Neurotoxicity were distributed following incorporation of the results of the Expert Consultation Meeting in Tokyo on May 24-26, 2005. The draft guideline consists of 50 paragraphs and an appendix with 102 references; and the draft RPA consists of 37 paragraphs with 109 references. National coordinators were requested to arrange for national expert reviews of these draft documents in their member countries. Members of the Developmental Neurotoxicology (DNT) Committee of the Japanese Teratology Society (JTS) reviewed, discussed, and commented on the draft Test Guideline Proposal. The DNT Committee of the JTS also commented on the draft document of the RPA. These comments were sent to the OECD Secretariat. The DNT Committee of the JTS expects the comments to be useful for the finalization of these draft documents.

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

76 FR 57759 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Availability of Draft Resource Management Plan and Draft Environmental Impact Statement for the Kremmling Field... Management Act of 1976 (FLPMA), as amended, the Bureau of Land Management (BLM) has prepared a Draft Resource... alternatives for future [[Page 57760

Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

DTIC Science & Technology

2010-04-08

Occupational Safety and Health Administration P2 Pollution prevention Pb Lead PFC Perfluorocarbon PG& E Pacific Gas & Electric PM2.5 Particulate matter 2.5...services center, a commissary and staff lounge , a warehouse, Chapter 2. Description of the Proposed Action and Alternatives Final Draft...including tenants. Ultimately, the CSC would obtain service from Pacific Gas & Electric (PG& E ) for the entire Center, once a planned line is completed by

Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

77 FR 46518 - Draft Resource Management Plan/General Plan Draft Environmental Impact Statement/Revised Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Resource Management Plan/General Plan Draft... Recreation Area, Merced County, California AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of... California Department of Parks and Recreation was given the responsibility to plan, design, construct...

IRIS Toxicological Review of Ammonia (Revised External Review Draft)

EPA Science Inventory

In August 2013, EPA submitted a revised draft IRIS assessment of ammonia to the agency's Science Advisory Board (SAB) and posted this draft on the IRIS website. EPA had previously released a draft of the assessment for public comment, held a public meeting about the draft, and ...

CURRENT PRACTICES OBSERVED IN DESIGN AND DRAFTING OCCUPATIONS.

ERIC Educational Resources Information Center

SQUIRES, CARL E.

DATA WHICH HAD SIGNIFICANCE FOR DESIGN AND DRAFTING CURRICULUMS WERE COLLECTED BY DIRECT OBSERVATION OF 21 DESIGN AND DRAFTING FACTORS WITHIN 16 SELECTED INDUSTRIAL COMPANIES EMPLOYING 869 DESIGNERS AND DRAFTSMEN. OBSERVATIONS COVERED (1) THE NUMBER OF DESIGN AND DRAFTING EMPLOYEES, (2) THE SYSTEM OF DRAFTING ROOM ORGANIZATION, (3) JOB…

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

Energy use in the marine transportation industry. Task III. Efficiency improvements. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-02

Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used is discussed in Chapter II. The technology base of the commercial marine transportation industry relating to energy usage is made up of: main propulsion plants, propulsors, hydrodynamics, vessel operations, and fuels. Fifteen specific program areas in the first four generic technologies are identified and are evaluated. An economic and energy impact analysis and technological risk assessment was performed on the specific program areas and the results are summarized in Chapter III. The first five appendices address the generic technologies. The sixth appendixmore » contains the baseline operating and cost parameters against which the 15 program areas were evaluated, and the last appendix contains sample printouts of the MTEM model used to evaluate the energy consumption and economic impacts associated with the candidate technology areas. (MCW)« less

About uncertainties in sea ice thickness retrieval from satellite radar altimetry: results from the ESA-CCI Sea Ice ECV Project Round Robin Exercise

NASA Astrophysics Data System (ADS)

Kern, S.; Khvorostovsky, K.; Skourup, H.; Rinne, E.; Parsakhoo, Z. S.; Djepa, V.; Wadhams, P.; Sandven, S.

2014-03-01

One goal of the European Space Agency Climate Change Initiative sea ice Essential Climate Variable project is to provide a quality controlled 20 year long data set of Arctic Ocean winter-time sea ice thickness distribution. An important step to achieve this goal is to assess the accuracy of sea ice thickness retrieval based on satellite radar altimetry. For this purpose a data base is created comprising sea ice freeboard derived from satellite radar altimetry between 1993 and 2012 and collocated observations of snow and sea ice freeboard from Operation Ice Bridge (OIB) and CryoSat Validation Experiment (CryoVEx) air-borne campaigns, of sea ice draft from moored and submarine Upward Looking Sonar (ULS), and of snow depth from OIB campaigns, Advanced Microwave Scanning Radiometer aboard EOS (AMSR-E) and the Warren Climatology (Warren et al., 1999). An inter-comparison of the snow depth data sets stresses the limited usefulness of Warren climatology snow depth for freeboard-to-thickness conversion under current Arctic Ocean conditions reported in other studies. This is confirmed by a comparison of snow freeboard measured during OIB and CryoVEx and snow freeboard computed from radar altimetry. For first-year ice the agreement between OIB and AMSR-E snow depth within 0.02 m suggests AMSR-E snow depth as an appropriate alternative. Different freeboard-to-thickness and freeboard-to-draft conversion approaches are realized. The mean observed ULS sea ice draft agrees with the mean sea ice draft computed from radar altimetry within the uncertainty bounds of the data sets involved. However, none of the realized approaches is able to reproduce the seasonal cycle in sea ice draft observed by moored ULS satisfactorily. A sensitivity analysis of the freeboard-to-thickness conversion suggests: in order to obtain sea ice thickness as accurate as 0.5 m from radar altimetry, besides a freeboard estimate with centimetre accuracy, an ice-type dependent sea ice density is as mandatory as a snow depth with centimetre accuracy.

Solar tower enhanced natural draft dry cooling tower

NASA Astrophysics Data System (ADS)

Yang, Huiqiang; Xu, Yan; Acosta-Iborra, Alberto; Santana, Domingo

2017-06-01

Concentrating Solar Power (CSP) plants are located in desert areas where the Direct Normal Irradiance (DNI) value is very high. Since water resource is scarcely available, mechanical draft cooing technology is commonly used, with power consumption of mechanical fans being approximately 2% of the total power generated. Today, there is only one solar power plant (Khi Solar One in South Africa) uses a condenser installed in a Natural Draft Cooling (NDC) tower that avoids the windage loss of water occurring in wet cooling towers. Although, Khi Solar One is a cavity receiver power tower, the receivers can be hung onto the NDC tower. This paper looks at a novel integration of a NDC tower into an external molten salt receiver of a solar power plant, which is one of a largest commercial molten salt tower in China, with 100MWe power capacity. In this configuration study, the NDC tower surrounds the concrete tower of the receiver concentrically. In this way, the receiver concrete tower is the central support of the NDC tower, which consists of cable networks that are fixed to the concrete tower and suspended at a certain height over the floor. The cable networks support the shell of the NDC tower. To perform a preliminary analysis of the behavior of this novel configuration, two cases of numerical simulation in three dimensional (3D) models have been solved using the commercial Computational Fluid Dynamics (CFD) code, ANSYS Fluent 6.3. The results show that the integration of the NDC tower into an external central receiver tower is feasible. Additionally, the total heat transfer rate is not reduced but slightly increases when the molten salt receiver is in operation because of the additional natural draft induced by the high temperature of the receiver.

Transportation and platforms perspective

NASA Technical Reports Server (NTRS)

Bennett, Gary L.

1992-01-01

The topics covered are presented in viewgraph form and include the following: Office of Aeronautics and Space Technology; space research and technology (R&T); space R&T mission statement; Space R&T program development; R&T strategy; Office of Space Science and Applications (OSSA) technology needs; transportation technology; and space platforms technology.

NASA space research and technology overview (ITP)

NASA Technical Reports Server (NTRS)

Reck, Gregory M.

1992-01-01

A series of viewgraphs summarizing NASA space research and technology is presented. Some of the specific topics covered include the organization and goals of the Office of Aeronautics and Space Technology, technology maturation strategy, integrated technology plan for the Civil Space Program, program selection and investment prioritization, and space technology benefits.

Managing the Drafting Process: Creating a New Model for the Workplace.

ERIC Educational Resources Information Center

Shwom, Barbara L.; Hirsch, Penny L.

1994-01-01

Discusses the development of a pragmatic model of the writing process in the workplace, focusing on the importance of "drafting" as part of that process. Discusses writers' attitudes about drafting and the structures of the workplace that drafting has to accommodate. Introduces a drafting model and discusses results of using this model…

76 FR 65722 - Notification of Two Public Teleconferences; Clean Air Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... EPA's Integrated Science Assessment for Lead (First External Review Draft, May 2011) and EPA's draft... Science Assessment for Lead (First External Review Draft, May 2011) should be directed to Dr. Ellen... Integrated Science Assessment for Lead (First External Review Draft, May 2011) and EPA's draft Near-Road NO 2...

46 CFR 151.03-35 - Limiting draft.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Limiting draft. 151.03-35 Section 151.03-35 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-35 Limiting draft. Maximum allowable draft to which a barge may be loaded. Limiting draft is a function of hull type and cargo specific gravity...

32 CFR 989.19 - Draft EIS.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Draft EIS. 989.19 Section 989.19 National... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.19 Draft EIS. (a) Preliminary draft. The EPF supports the proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

46 CFR 151.03-35 - Limiting draft.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Limiting draft. 151.03-35 Section 151.03-35 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-35 Limiting draft. Maximum allowable draft to which a barge may be loaded. Limiting draft is a function of hull type and cargo specific gravity...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

32 CFR 989.19 - Draft EIS.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Draft EIS. 989.19 Section 989.19 National... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.19 Draft EIS. (a) Preliminary draft. The EPF supports the proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues...

46 CFR 151.03-35 - Limiting draft.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Limiting draft. 151.03-35 Section 151.03-35 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-35 Limiting draft. Maximum allowable draft to which a barge may be loaded. Limiting draft is a function of hull type and cargo specific gravity...

46 CFR 151.03-35 - Limiting draft.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Limiting draft. 151.03-35 Section 151.03-35 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-35 Limiting draft. Maximum allowable draft to which a barge may be loaded. Limiting draft is a function of hull type and cargo specific gravity...

18 CFR 281.212 - Draft tariff and index of entitlements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Draft tariff and index... Rule § 281.212 Draft tariff and index of entitlements. (a) Each interstate pipeline shall prepare draft tariff sheets or sections and a draft index of entitlements in accordance with this subpart. (b) The...

46 CFR 151.03-35 - Limiting draft.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Limiting draft. 151.03-35 Section 151.03-35 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-35 Limiting draft. Maximum allowable draft to which a barge may be loaded. Limiting draft is a function of hull type and cargo specific gravity...

32 CFR 989.19 - Draft EIS.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Draft EIS. 989.19 Section 989.19 National... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.19 Draft EIS. (a) Preliminary draft. The EPF supports the proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues...