40 CFR 63.694 - Testing methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determine treatment process required HAP biodegradation efficiency (Rbio) for compliance with standards... procedures to minimize the loss of compounds due to volatilization, biodegradation, reaction, or sorption... compounds due to volatilization, biodegradation, reaction, or sorption during the sample collection, storage...

40 CFR 63.694 - Testing methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determine treatment process required HAP biodegradation efficiency (Rbio) for compliance with standards... procedures to minimize the loss of compounds due to volatilization, biodegradation, reaction, or sorption... compounds due to volatilization, biodegradation, reaction, or sorption during the sample collection, storage...

40 CFR 63.694 - Testing methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determine treatment process required HAP biodegradation efficiency (Rbio) for compliance with standards... procedures to minimize the loss of compounds due to volatilization, biodegradation, reaction, or sorption... compounds due to volatilization, biodegradation, reaction, or sorption during the sample collection, storage...

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

77 FR 23176 - Revisions to Procedural Rules

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

... helpful to the Postal Service's decision making process as required by law. V. Comment Procedures Pursuant... under 39 U.S.C. 3661. These cases involve changes in the nature of postal services which affect service... persons on ways to improve and expedite its procedures, consistent with due process. Following review of...

Procedural Due Process in Indian Education. Scripts for a Two-Part Filmstrip/Audio Tape Program. Curriculum Bulletin 18.03.

ERIC Educational Resources Information Center

Streiff, Paul R.

In 1974 new sections added to the Code of Federal Regulations and the Indian Affairs Field Manual required the establishment of programs of student rights and responsibilities and due process procedures in schools operated or funded by the Bureau of Indian Affairs. This two-part filmstrip and audio tape program is designed to assist educators and…

34 CFR 300.140 - Due process complaints and State complaints.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EDUCATION OF CHILDREN WITH DISABILITIES State Eligibility Children with Disabilities Enrolled by Their Parents in Private Schools § 300.140 Due process complaints and State complaints. (a) Due process not applicable, except for child find. (1) Except as provided in paragraph (b) of this section, the procedures in...

Due Process and Higher Education: A Systemic Approach to Fair Decision Making. ASHE-ERIC Higher Education Report, Volume 27, Number 2.

ERIC Educational Resources Information Center

Stevens, Ed

Due process has become an important principle in higher education as a result of many new legal issues, including dismissals of students from campus, firings of staff members, faculty tenure and promotion, sexual harassment, discrimination, and substance abuse. This volume defines due process; explains when due process procedures are required;…

25 CFR 42.6 - When does due process require a formal disciplinary hearing?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false When does due process require a formal disciplinary... RIGHTS § 42.6 When does due process require a formal disciplinary hearing? Unless local school policies and procedures provide for less, a formal disciplinary hearing is required before a suspension in...

SYSTEMATIC PROCEDURE FOR DESIGNING PROCESSES WITH MULTIPLE ENVIRONMENTAL OBJECTIVES

EPA Science Inventory

Evaluation of multiple objectives is very important in designing environmentally benign processes. It requires a systematic procedure for solving multiobjective decision-making problems, due to the complex nature of the problems, the need for complex assessments, and complicated ...

Due Process in the Realm of Higher Education: Considerations for Dealing with Students Rights

ERIC Educational Resources Information Center

Fishner, Jason T.

2006-01-01

Court decisions have laid out expectations of what due process procedures need to be followed in student disciplinary cases and academic dismissal cases due to poor academic performance. This paper will give show where due process comes from and how it found its way into higher education. It will show that there are differences in the ways public…

A SYSTEMATIC PROCEDURE FOR DESIGNING PROCESSES WITH MULTIPLE ENVIRONMENTAL OBJECTIVES

EPA Science Inventory

Evaluation and analysis of multiple objectives are very important in designing environmentally benign processes. They require a systematic procedure for solving multi-objective decision-making problems due to the complex nature of the problems and the need for complex assessment....

The Aftermath of "Goss v. Lopez": Procedural Due Process for Suspensions and Expulsions. A Legal Memorandum: Quarterly Law Topics for School Leaders. Vol. 6, No. 4, Summer 2006

ERIC Educational Resources Information Center

Zirkel, Perry A.

2006-01-01

In its landmark decision in "Goss v. Lopez" (1975), the U.S. Supreme Court ruled that for a suspension of 10 days or fewer, public school officials must provide the student with at least the following minimum of procedural protection on the basis of the Fourteenth Amendment's due process clause: oral (or written) notice of the charges…

34 CFR 300.521-300.529 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true [Reserved] 300.521-300.529 Section 300.521-300.529... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children §§ 300.521-300.529 [Reserved] Discipline Procedures ...

34 CFR 300.521-300.529 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false [Reserved] 300.521-300.529 Section 300.521-300.529... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children §§ 300.521-300.529 [Reserved] Discipline Procedures ...

34 CFR 300.521-300.529 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true [Reserved] 300.521-300.529 Section 300.521-300.529... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children §§ 300.521-300.529 [Reserved] Discipline Procedures ...

34 CFR 300.521-300.529 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false [Reserved] 300.521-300.529 Section 300.521-300.529... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children §§ 300.521-300.529 [Reserved] Discipline Procedures ...

34 CFR 300.521-300.529 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false [Reserved] 300.521-300.529 Section 300.521-300.529... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children §§ 300.521-300.529 [Reserved] Discipline Procedures ...

34 CFR 300.513 - Hearing decisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... receive a FAPE only if the procedural inadequacies— (i) Impeded the child's right to a FAPE; (ii... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.513 Hearing decisions...

34 CFR 303.419 - Mediation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Mediation. 303.419 Section 303.419 Education... DISABILITIES Procedural Safeguards Mediation and Due Process Procedures for Parents and Children § 303.419 Mediation. (a) General. Each State shall ensure that procedures are established and implemented to allow...

Standard Setting as Psychometric Due Process: Going a Little Further Down an Uncertain Road.

ERIC Educational Resources Information Center

Cizek, Gregory J.

The concept of due process provides an analogy for the process of standard setting that emphasizes many of the procedural and substantive elements of the process over technical and statistical concerns. Surely such concerns can and should continue to be addressed. However, a sound rationale for standard setting does not rest on this foundation.…

34 CFR 300.535 - Referral to and action by law enforcement and judicial authorities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children Discipline Procedures § 300.535 Referral to and action by law enforcement and... crime committed by a child with a disability to appropriate authorities or prevents State law...

34 CFR 300.535 - Referral to and action by law enforcement and judicial authorities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children Discipline Procedures § 300.535 Referral to and action by law enforcement and... crime committed by a child with a disability to appropriate authorities or prevents State law...

34 CFR 300.535 - Referral to and action by law enforcement and judicial authorities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children Discipline Procedures § 300.535 Referral to and action by law enforcement and... crime committed by a child with a disability to appropriate authorities or prevents State law...

34 CFR 300.535 - Referral to and action by law enforcement and judicial authorities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children Discipline Procedures § 300.535 Referral to and action by law enforcement and... crime committed by a child with a disability to appropriate authorities or prevents State law...

34 CFR 300.535 - Referral to and action by law enforcement and judicial authorities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children Discipline Procedures § 300.535 Referral to and action by law enforcement and... crime committed by a child with a disability to appropriate authorities or prevents State law...

Procedural Due Process for Students at Public Colleges and Universities.

ERIC Educational Resources Information Center

Golden, Edward J.

1982-01-01

Reports the findings of a study to determine what procedural protections are afforded students at public colleges and universities who are faced with disciplinary or academic dismissal. The data are from 62 of the 85 public postsecondary institutions asked to provide published procedural guidelines. (Author/MLF)

78 FR 12998 - Establishment of Due Process Procedures on License-Like Processes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... requirements, CBP proposes to amend 19 CFR parts 142 and 143 by adding notice requirements and appeal... revise Sec. 142.3a(d) of title 19 of the CFR to provide notice requirements and appeal procedures for... warranting the action. The importer or broker will have the opportunity to appeal the port director's...

Public University Responses to Academic Dishonesty: Disciplinary or Academic.

ERIC Educational Resources Information Center

Roberts, Robert N.

1986-01-01

Reviews court decisions in cases involving suspension or dismissal of public university students for academic dishonesty. The courts have required universities defending such suits to meet the procedural and due process standards for nonacademic disciplinary proceedings. Discusses the constitutional due process problems raised by the suspension or…

Proceduralism and Bureaucracy: Due Process in the School Setting

ERIC Educational Resources Information Center

Kirp, David L.

1976-01-01

The likely consequences of applying traditional due process standards, expecially formal adversary hearings, to the public school are examined. The ruling in Goss v. Lopez suggests that fair treatment can still be expected if the hearings are treated as opportunities for candid and informal exchange rather than prepunishment ceremonies. (LBH)

Contract Law, Due Process, and the NCAA.

ERIC Educational Resources Information Center

Dickerson, Jaffe D.; Chapman, Mayer

1978-01-01

The NCAA has enjoyed almost total freedom from judicial scrutiny of its rules, procedures, and official acts in large part because of its private nature as an unincorporated association. The function of the NCAA, California State University, Hayward v NCAA, and due process of the student-athlete are discussed. (MLW)

AFT Chief Promises Due-Process Reform

ERIC Educational Resources Information Center

Sawchuk, Stephen

2010-01-01

The president of the American Federation of Teachers (AFT), Randi Weingarten, is putting the sensitive issue of due process on the education reform table, with a pledge to work with districts to streamline the often-cumbersome procedures for dismissing teachers who fail to improve their performance after receiving help and support. She has also…

The Procedural Queer: Substantive Due Process, "Lawrence v. Texas," and Queer Rhetorical Futures

ERIC Educational Resources Information Center

Campbell, Peter Odell

2012-01-01

This essay discusses Justice Anthony M. Kennedy's choice to foreground arguments from due process rather than equal protection in the majority opinion in Lawrence v. Texas. Kennedy's choice can realize constitutional legal doctrine that is more consistent with radical queer politics than arguments from equal protection. Unlike some recent…

Administrator Accountability Plan, 1986-87.

ERIC Educational Resources Information Center

Council Bluffs Community School District, IA.

This summary outline presents performance evaluation procedures of the 1986-87 administrator accountability plan adopted by the Council Bluffs Community Schools, Iowa. Procedures ensure that a cooperative evaluation plan is established, there is continuity between evaluation cycles, guidance and assistance are provided, and due process is…

The "emotion misattribution" procedure: processing beyond good and bad under masked and unmasked presentation conditions.

PubMed

Rohr, Michaela; Degner, Juliane; Wentura, Dirk

2015-01-01

In general, it is assumed that misattribution in the Affect Misattribution Procedure (AMP) is restricted to crude affect due to its unbound nature, especially under limited presentation conditions. In two experiments, we investigated whether emotion-specific misattributions occur using a four-category misattribution procedure. Experiment 1 yielded emotion-specific misattribution effects under clearly visible presentation conditions demonstrating that the procedure is principally susceptible for emotion-specific effects. In Experiment 2, we employed masked presentation conditions impeding conscious prime perception. A specific pattern of emotion-specific misattributions effects emerged indicating some emotion-specific processing at initial stages of processing. However, not each emotion was misattributed equally. We discuss the implications of these results for the non-conscious processing of emotional information, for the supposed mechanisms of the AMP and its implicit nature.

34 CFR 300.512 - Hearing rights.

Code of Federal Regulations, 2012 CFR

2012-07-01

... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.512 Hearing rights. (a... counsel and by individuals with special knowledge or training with respect to the problems of children...

34 CFR 300.512 - Hearing rights.

Code of Federal Regulations, 2014 CFR

2014-07-01

... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.512 Hearing rights. (a... counsel and by individuals with special knowledge or training with respect to the problems of children...

34 CFR 300.512 - Hearing rights.

Code of Federal Regulations, 2013 CFR

2013-07-01

... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.512 Hearing rights. (a... counsel and by individuals with special knowledge or training with respect to the problems of children...

34 CFR 300.512 - Hearing rights.

Code of Federal Regulations, 2011 CFR

2011-07-01

... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.512 Hearing rights. (a... counsel and by individuals with special knowledge or training with respect to the problems of children...

Identifying the Associated Factors of Mediation and Due Process in Families of Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Burke, Meghan M.; Goldman, Samantha E.

2015-01-01

Compared to families of students with other types of disabilities, families of students with autism spectrum disorder (ASD) are significantly more likely to enact their procedural safeguards such as mediation and due process. However, we do not know which school, child, and parent characteristics are associated with the enactment of safeguards.…

34 CFR 300.512 - Hearing rights.

Code of Federal Regulations, 2010 CFR

2010-07-01

... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.512 Hearing rights. (a... 34 Education 2 2010-07-01 2010-07-01 false Hearing rights. 300.512 Section 300.512 Education...

34 CFR 300.505 - Electronic mail.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true Electronic mail. 300.505 Section 300.505 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.505 Electronic mail. A....508 by an electronic mail communication, if the public agency makes that option available. (Authority...

34 CFR 300.505 - Electronic mail.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Electronic mail. 300.505 Section 300.505 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.505 Electronic mail. A....508 by an electronic mail communication, if the public agency makes that option available. (Authority...

34 CFR 300.505 - Electronic mail.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Electronic mail. 300.505 Section 300.505 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.505 Electronic mail. A....508 by an electronic mail communication, if the public agency makes that option available. (Authority...

34 CFR 300.505 - Electronic mail.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false Electronic mail. 300.505 Section 300.505 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.505 Electronic mail. A....508 by an electronic mail communication, if the public agency makes that option available. (Authority...

34 CFR 300.505 - Electronic mail.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false Electronic mail. 300.505 Section 300.505 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.505 Electronic mail. A....508 by an electronic mail communication, if the public agency makes that option available. (Authority...

Supporting Public Administration with an Integrated BPR Environment

NASA Astrophysics Data System (ADS)

Ciaghi, Aaron; Villafiorita, Adolfo; Weldemariam, Komminist; Mattioli, Andrea; Phan, Quoc-Sang

The definition or redesign of Public Administration (PA) procedures is particularly challenging. This is, for example, due to the requirement of cooperation of different organizational units and actors, different laws and procedures for the production of several artifacts, and maintaining traceability while integrating processes with new laws.

45 CFR 286.160 - What are the applicable time frames and procedures for submitting a Tribal Family Assistance Plan?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What are the applicable time frames and procedures... and Processing § 286.160 What are the applicable time frames and procedures for submitting a Tribal... Secretary according to the following time frames: Implementation date: Letter of intent due to ACF and the...

34 CFR 300.519 - Surrogate parents.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Surrogate parent responsibilities. The surrogate parent may represent the child in all matters relating to... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.519 Surrogate parents..., cannot locate a parent; (3) The child is a ward of the State under the laws of that State; or (4) The...

34 CFR 300.519 - Surrogate parents.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Surrogate parent responsibilities. The surrogate parent may represent the child in all matters relating to... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.519 Surrogate parents..., cannot locate a parent; (3) The child is a ward of the State under the laws of that State; or (4) The...

34 CFR 300.519 - Surrogate parents.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Surrogate parent responsibilities. The surrogate parent may represent the child in all matters relating to... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.519 Surrogate parents..., cannot locate a parent; (3) The child is a ward of the State under the laws of that State; or (4) The...

34 CFR 300.519 - Surrogate parents.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Surrogate parent responsibilities. The surrogate parent may represent the child in all matters relating to... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.519 Surrogate parents..., cannot locate a parent; (3) The child is a ward of the State under the laws of that State; or (4) The...

34 CFR 300.519 - Surrogate parents.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Surrogate parent responsibilities. The surrogate parent may represent the child in all matters relating to... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.519 Surrogate parents..., cannot locate a parent; (3) The child is a ward of the State under the laws of that State; or (4) The...

34 CFR 300.518 - Child's status during proceedings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false Child's status during proceedings. 300.518 Section 300... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.518 Child's status during proceedings. (a) Except as provided in § 300.533, during the pendency of any...

34 CFR 300.518 - Child's status during proceedings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Child's status during proceedings. 300.518 Section 300... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.518 Child's status during proceedings. (a) Except as provided in § 300.533, during the pendency of any...

34 CFR 300.518 - Child's status during proceedings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Child's status during proceedings. 300.518 Section 300... CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.518 Child's status during proceedings. (a) Except as provided in § 300.533, during the pendency of any...

Student Discipline: Procedural Issues.

ERIC Educational Resources Information Center

Phay, Robert E.

This chapter's discussion of student discipline stresses a student's right to due process when he or she is faced with suspension or expulsion from school. To determine procedural requirements, the paper states, a school must examine both the statutes of the state and the requirements imposed by state and federal constitutions. The major topic of…

A Handbook for Hearing Officers. Revised.

ERIC Educational Resources Information Center

McCarthy, Greg

The handbook provides information on legislation and litigation pertaining to the education of handicapped pupils in South Carolina, required procedures for ensuring due process, and suggestions for procedures to be followed by Hearing Officers prior to, during, and after a hearing. The opening section on state laws includes definitions of…

Hierarchically Parallelized Constrained Nonlinear Solvers with Automated Substructuring

NASA Technical Reports Server (NTRS)

Padovan, Joe; Kwang, Abel

1994-01-01

This paper develops a parallelizable multilevel multiple constrained nonlinear equation solver. The substructuring process is automated to yield appropriately balanced partitioning of each succeeding level. Due to the generality of the procedure,_sequential, as well as partially and fully parallel environments can be handled. This includes both single and multiprocessor assignment per individual partition. Several benchmark examples are presented. These illustrate the robustness of the procedure as well as its capability to yield significant reductions in memory utilization and calculational effort due both to updating and inversion.

Constitutional Law--Irrebuttable Statutory Presemption of Student Non-Residency Held Violative of Due Process Clause of Fourteenth Amendment--Vlandis v. Kline, 93 S. Ct. 2230 (1973)

ERIC Educational Resources Information Center

University of Richmond Law Review, 1974

1974-01-01

In the past the durational residence requirement in colleges and universities has been subject to constitutional challenge under the equal protection clause of the fourteenth amendment. The durational residence requirement in this case displays a further fourteenth amendment vulnerability--the contravention of procedural due process. (Author/PG)

A vertical-energy-thresholding procedure for data reduction with multiple complex curves.

PubMed

Jung, Uk; Jeong, Myong K; Lu, Jye-Chyi

2006-10-01

Due to the development of sensing and computer technology, measurements of many process variables are available in current manufacturing processes. It is very challenging, however, to process a large amount of information in a limited time in order to make decisions about the health of the processes and products. This paper develops a "preprocessing" procedure for multiple sets of complicated functional data in order to reduce the data size for supporting timely decision analyses. The data type studied has been used for fault detection, root-cause analysis, and quality improvement in such engineering applications as automobile and semiconductor manufacturing and nanomachining processes. The proposed vertical-energy-thresholding (VET) procedure balances the reconstruction error against data-reduction efficiency so that it is effective in capturing key patterns in the multiple data signals. The selected wavelet coefficients are treated as the "reduced-size" data in subsequent analyses for decision making. This enhances the ability of the existing statistical and machine-learning procedures to handle high-dimensional functional data. A few real-life examples demonstrate the effectiveness of our proposed procedure compared to several ad hoc techniques extended from single-curve-based data modeling and denoising procedures.

EMU processing - A myth dispelled

NASA Technical Reports Server (NTRS)

Peacock, Paul R.; Wilde, Richard C.; Lutz, Glenn C.; Melgares, Michael A.

1991-01-01

The refurbishment-and-checkout 'processing' activities entailed by the Space Shuttle Extravehicular Mobility Units (EMUs) are currently significantly more modest, at 1050 man-hours, than when Space Shuttle services began (involving about 4000 man-hours). This great improvement in hardware efficiency is due to the design or modification of test rigs for simplification of procedures, as well as those procedures' standardization, in conjunction with an increase in hardware confidence which has allowed the extension of inspection, service, and testing intervals. Recent simplification of the hardware-processing sequence could reduce EMU processing requirements to 600 man-hours in the near future.

Reducing the Teacher Workforce: A Management Perspective.

ERIC Educational Resources Information Center

Collins, Philip; Nelson, Dorothy Q.

1983-01-01

Discusses substantive and procedural restraints, including legal pitfalls, due process, and no-layoff clauses, within which public employers must decide questions of reduction in workforce (RIF). Describes elements of a sound RIF policy and considers ways of using the collective bargaining process to facilitate the RIF process. (JBM)

78 FR 58897 - Pipeline Safety: Administrative Procedures; Updates and Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... incorporate increased transparency into the decision making process, the regulations must explicitly recognize... certainty, and due process. II. Discussion of Comments The comments received from the trade organizations... assistance through these processes by assisting OPS in the development of written responses to requests for...

Autologous chondrocyte implantation for cartilage injury treatment in Chiang Mai University Hospital: a case report.

PubMed

Wongtriratanachai, Prasit; Pruksakorn, Dumnoensun; Pothacharoen, Peraphan; Nimkingratana, Puwapong; Pattamapaspong, Nuttaya; Phornphutkul, Chanakarn; Setsitthakun, Sasiwariya; Fongsatitkul, Ladda; Phrompaet, Sureeporn

2013-11-01

Autologous chondrocyte implantation (ACI) has become one of the standard procedures for articular cartilage defect treatment. This technique provides a promising result. However the procedural process requires an approach of several steps from multidisciplinary teams. Although the success of this procedure has been reported from Srinakharinvirot University since 2007, the application of ACI is still limited in Thailand due to the complexity of processes and stringent quality control. This report is to present the first case of the cartilage defect treatment using the first generation-ACI under Chiang Mai University's (CMU) own facility and Ethics Committee. This paper also reviews the process of biotechnology procedures, patient selection, surgical, and rehabilitation techniques. The success of the first case is an important milestone for the further development of the CMU Human Translational Research Laboratory in near future.

Collaboration and the Collective-Bargaining Process in Public Education

ERIC Educational Resources Information Center

Noggle, Matthew

2010-01-01

In the vast majority of school districts, the collective-bargaining process has evolved little during the past few decades. Teachers unions have successfully represented teachers' economic and job security interests by linking them to collective bargaining and procedural due process rights, but district administrators continue to make the…

32 CFR 156.4 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., training, and awareness support to the DoD PSP. (5) Serve as the primary contact between DoD, the Red Cross... for contracts and agreements that require non-DoD personnel to adhere to personnel security procedures... administrative due process procedures of the DoD PSP. (2) Perform functions relating to the DoD PSP including the...

34 CFR 300.516 - Civil action.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

34 CFR 300.516 - Civil action.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

34 CFR 300.516 - Civil action.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

34 CFR 300.516 - Civil action.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

34 CFR 300.516 - Civil action.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

48 CFR 1852.245-73 - Financial reporting of NASA property in the custody of contractors.

Code of Federal Regulations, 2013 CFR

2013-10-01

... due. However, contractors' procedures must document the process for developing these estimates based... shall have formal policies and procedures, which address the validation of NF 1018 data, including data... validation is to ensure that information reported is accurate and in compliance with the NASA FAR Supplement...

48 CFR 1852.245-73 - Financial reporting of NASA property in the custody of contractors.

Code of Federal Regulations, 2012 CFR

2012-10-01

... due. However, contractors' procedures must document the process for developing these estimates based... shall have formal policies and procedures, which address the validation of NF 1018 data, including data... validation is to ensure that information reported is accurate and in compliance with the NASA FAR Supplement...

The Substantive and Procedural Due Process Rights of Students Accused of Criminal Behavior in School and the Educational Rights of Adjudicated Youths.

ERIC Educational Resources Information Center

Brown, Frank

This paper--part of a collection of 54 papers from the 48th annual conference of the Education Law Association held in November 2002-- addresses juvenile justice. Its central issue is how to protect children of color in elementary and secondary schools with constitutional due process where attendance is compulsory and, at the same time, maintain a…

Pupils

ERIC Educational Resources Information Center

Garber, Lee O.; Seitz, Reynolds C.

1971-01-01

Discusses recent court litigation concerning legal rights and responsibilities of pupils covering procedural due process, grooming and appearance, regulation of speech and publications, liability for pupil injuries, and racial integration. (JF)

An Issue of Conflicting Rights: Nursing Student Charged with Drug Trafficking.

ERIC Educational Resources Information Center

Cullen, Phyllis; And Others

1997-01-01

Outlines a case of a nursing student charged with drug trafficking who was not suspended due to concern over student rights. Reviews case law that would have supported suspension. Advocates clearly defined policies and procedures that ensure due process while allowing for disciplinary action. (SK)

Comparison of the quasi-static method and the dynamic method for simulating fracture processes in concrete

NASA Astrophysics Data System (ADS)

Liu, J. X.; Deng, S. C.; Liang, N. G.

2008-02-01

Concrete is heterogeneous and usually described as a three-phase material, where matrix, aggregate and interface are distinguished. To take this heterogeneity into consideration, the Generalized Beam (GB) lattice model is adopted. The GB lattice model is much more computationally efficient than the beam lattice model. Numerical procedures of both quasi-static method and dynamic method are developed to simulate fracture processes in uniaxial tensile tests conducted on a concrete panel. Cases of different loading rates are compared with the quasi-static case. It is found that the inertia effect due to load increasing becomes less important and can be ignored with the loading rate decreasing, but the inertia effect due to unstable crack propagation remains considerable no matter how low the loading rate is. Therefore, an unrealistic result will be obtained if a fracture process including unstable cracking is simulated by the quasi-static procedure.

34 CFR 300.503 - Prior notice by the public agency; content of notice.

Code of Federal Regulations, 2010 CFR

2010-07-01

... THE EDUCATION OF CHILDREN WITH DISABILITIES Procedural Safeguards Due Process Procedures for Parents... refused action; (4) A statement that the parents of a child with a disability have protection under the... other mode of communication used by the parent, unless it is clearly not feasible to do so. (2) If the...

Information Technology Project Processes: Understanding the Barriers to Improvement and Adoption

ERIC Educational Resources Information Center

Williams, Bernard L.

2009-01-01

Every year, organizations lose millions of dollars due to IT (Information Technology) project failures. Over time, organizations have developed processes and procedures to help reduce the incidence of challenged IT projects. Research has shown that IT project processes can work to help reduce the number of challenged projects. The research in this…

The School Official's Guide to Student Disciplinary Hearings.

ERIC Educational Resources Information Center

Cartwright, Gene J.; Schwartz, Allen D.

This guide to student disciplinary hearings provides an understanding of procedures and options during the student suspension or expulsion process through the perspectives of the different participants. Section 1, "Why Hearings?" discusses due process and the three categories of student disciplinary hearings: pre-suspension, suspension, and…

Design, Fabrication, Processing, and Testing of Micro-Electro-Mechanical Chemical Sensors

DTIC Science & Technology

1995-12-01

sensor ...... .......................... 118 71. Resonating bridge parameter curves ...... ......................... 119 72. Low frequency oscillations...131 82. Heater V-I curve .. .. .. .. ... ... ... ... ... ... ... ... ..... 132 83. Frequency response of heated chemoresistor...devices, including devices that may be pre-stressed due to fabrication procedures (i.e. curve out of the plane after being released)? Due to their

20 CFR 416.903a - Program integrity.

Code of Federal Regulations, 2010 CFR

2010-04-01

... currently revoked or suspended by any State licensing authority pursuant to adequate due process procedures... involving professional conduct are pending. By individual or entity we mean a medical or psychological...

20 CFR 416.903a - Program integrity.

Code of Federal Regulations, 2011 CFR

2011-04-01

... currently revoked or suspended by any State licensing authority pursuant to adequate due process procedures... involving professional conduct are pending. By individual or entity we mean a medical or psychological...

Effectiveness of HVAC duct cleaning procedures in improving indoor air quality.

PubMed

Ahmad, I; Tansel, B; Mitrani, J D

2001-12-01

Indoor air quality has become one of the most serious environmental concerns as an average person spends about 22 hr indoors on a daily basis. The study reported in this article, was conducted to determine the effectiveness of three commercial HVAC (Heating Ventilation Air Conditioning) duct cleaning processes in reducing the level of airborne particulate matter and viable bioaerosols. The three HVAC sanitation processes were: (1) Contact method (use of conventional vacuum cleaning of interior duct surfaces); (2) Air sweep method (use of compressed air to dislodging dirt and debris); (3) Rotary brush method (insertion of a rotary brush into the ductwork to agitate and dislodge the debris). Effectiveness of these sanitation processes was evaluated in terms of airborne particulate and viable bioaerosol concentrations in residential homes. Eight identical homes were selected in the same neighborhood. Two homes were cleaned using each procedure and two were used as controls. It was found that both particle count readings and bioaerosol concentrations were higher when cleaning was being performed than before or after cleaning, which suggests that dirt, debris and other pollutants may become airborne as a result of disturbances caused by the cleaning processes. Particle count readings at 0.3 micron size were found to have increased due to cigarette smoking. Particle counts at 1.0 micron size were reduced due to HVAC duct cleaning. Post-level bioaerosol concentrations, taken two days after cleaning, were found to be lower than the pre-level concentrations suggesting that the cleaning procedures were effective to some extent. Homes cleaned with the Air Sweep procedure showed the highest degree of reduction in bioaerosol concentration among the three procedures investigated.

Highly Concurrent Scalar Processing.

DTIC Science & Technology

1986-01-01

rearrangement arise from data dependencies between instructions, hence it is critical that artificial - dependencies are eliminated whenever possible...An important class of artificial depen- *. dencies arise due to register reuse. In the following example, no parallelism can be • . exploited in the...specific procedure call site. The use of inteligent procedure expansion techniques is expected to be crucial to the achievement of high performance

Automated Chromium Plating Line for Gun Barrels

DTIC Science & Technology

1979-09-01

consistent pretreatments and bath dwell times. Some of the advantages of automated processing include increased productivity (average of 20^) due to...when automated processing procedures’ are used. The current method of applying chromium electrodeposits to gun tubes is a manual, batch operation...currently practiced with rotary swaged gun tubes would substantially reduce the difficulties in automated processing . RECOMMENDATIONS

Chromaticity based smoke removal in endoscopic images

NASA Astrophysics Data System (ADS)

Tchaka, Kevin; Pawar, Vijay M.; Stoyanov, Danail

2017-02-01

In minimally invasive surgery, image quality is a critical pre-requisite to ensure a surgeons ability to perform a procedure. In endoscopic procedures, image quality can deteriorate for a number of reasons such as fogging due to the temperature gradient after intra-corporeal insertion, lack of focus and due to smoke generated when using electro-cautery to dissect tissues without bleeding. In this paper we investigate the use of vision processing techniques to remove surgical smoke and improve the clarity of the image. We model the image formation process by introducing a haze medium to account for the degradation of visibility. For simplicity and computational efficiency we use an adapted dark-channel prior method combined with histogram equalization to remove smoke artifacts to recover the radiance image and enhance the contrast and brightness of the final result. Our initial results on images from robotic assisted procedures are promising and show that the proposed approach may be used to enhance image quality during surgery without additional suction devices. In addition, the processing pipeline may be used as an important part of a robust surgical vision pipeline that can continue working in the presence of smoke.

Implication of defamation for dental educators.

PubMed

Moore, R N

1987-08-01

Recent court decisions have indicated that in dealing with their students and colleagues, faculty must balance academic freedom and the individual right of fair consideration. It is also important for faculty and administrators to distinguish between decision-making procedures and criteria. It is quite clear from two recent United States Supreme Court cases that subjective evaluation by professional judgment is permissible as long as standard procedures of procedural due process are followed. In short, courts are more likely to review the application of the criteria than their substance.

ASRDI Oxygen Technology Survey. Volume 2: Cleaning Requirements, Procedures, and Verification Techniques

NASA Technical Reports Server (NTRS)

Bankaitis, H.; Schueller, C. F.

1972-01-01

The oxygen system cleaning specifications drawn from 23 industrial and government sources are presented along with cleaning processes employed for meeting these specifications, and recommended postcleaning inspection procedures for establishing the cleanliness achieved. Areas of agreement and difference in the specifications, procedures, and inspection are examined. Also, the lack of clarity or specificity will be discussed. This absence of clarity represents potential safety hazards due to misinterpretation. It can result in exorbitant expenditures of time and money in satisfying unnecessary requirements.

[Cognitive aging mechanism of signaling effects on the memory for procedural sentences].

PubMed

Yamamoto, Hiroki; Shimada, Hideaki

2006-08-01

The aim of this study was to clarify the cognitive aging mechanism of signaling effects on the memory for procedural sentences. Participants were 60 younger adults (college students) and 60 older adults. Both age groups were assigned into two groups; half of each group was presented with procedural sentences with signals that highlighted their top-level structure and the other half with procedural sentences without them. Both groups were requested to perform the sentence arrangement task and the reconstruction task. Each task was composed of procedural sentences with or without signals. Results indicated that signaling supported changes in strategy utilization during the successive organizational processes and that changes in strategy utilization resulting from signaling improved the memory for procedural sentences. Moreover, age-related factors interfered with these signaling effects. This study clarified the cognitive aging mechanism of signaling effects in which signaling supports changes in the strategy utilization during organizational processes at encoding and this mediation promotes memory for procedural sentences, though disuse of the strategy utilization due to aging restrains their memory for procedural sentences.

Department of Defense Dependents Schools Special Education Dispute Management System.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

The regulations outline procedures and policies for resolving disputes in special education in the U.S. Department of Defense Dependents schools. Processes involved in conferences, mediation, and due process hearings concerning issues of identification, eligibility, individualized education programs, or programing are outlined. At each of the…

The Impartial Hearing Officer: A Procedural Safeguards Training Manual for Utah.

ERIC Educational Resources Information Center

Utah State Univ., Salt Lake City. Intermountain Plains Regional Resource Center.

The manual for due process hearing officers in Utah provides information on prehearing activities, hearing activities, decision making processes, and final reporting on hearings regarding conflicts or disagreements between the parents and the school district concerning the most appropriate educational program for the handicapped child. An…

Sex Discrimination as Public Policy

ERIC Educational Resources Information Center

Pottker, Janice; Fishel, Andrew

1974-01-01

Article examined the policy procedure that existed until struck down by the Supreme Court which made it a violation of the due process clause of the U. S. Constitution to promote discriminatory maternity leave policies. (RK)

Reactance in affective-evaluative learning: Outside of conscious control?

PubMed

Fulcher, Eamon P; Hammerl, Marianne

2005-02-01

Recent studies have shown that the basic evaluative conditioning (EC) effect (originally neutral stimuli acquiring an affective value congruent with the valence of the affective stimulus they were paired with) seems to be limited to participants who are unaware of the stimulus pairings. If participants are aware of the pairings, reactance effects occur (i.e., changes in the opposite direction of the valence of the affective stimulus). To examine whether these reactance effects are due to processes of conscious countercontrol or whether the ratings reflect intrinsic feelings towards the stimuli, a new procedure was developed that included a bogus-pipeline condition. In this procedure, which was adapted from attitude research, participants were connected to bogus lie detector equipment leading them to believe that their "true" affective-evaluative responses were being observed. In Experiment 1, reactance effects occurred also in this procedure, suggesting that the effect is spontaneous and not due to processes of conscious countercontrol. In Experiment 2, these effects were replicated using a between-subjects design in addition to the standard within-subjects control condition.

Middle School/Secondary Strategies.

ERIC Educational Resources Information Center

Roe, Richard; And Others

1986-01-01

Presents three complete lesson plans for class activities that teach youths about the writ of habeas corpus, procedural justice, and due process, through the use of role playing, a criminal law mock trial, and case study techniques. (JDH)

Tracking and Ability Grouping in Education.

ERIC Educational Resources Information Center

Drowatzky, John N.

1981-01-01

A look at identification, grouping, and instruction techniques, followed by an assessment of the legality of a properly administered tracking system and an enumeration of guidelines and due process procedures that must be followed. (Author/MLF)

Legal Aspects of Faculty Reduction.

ERIC Educational Resources Information Center

Hendrickson, Robert M.

1981-01-01

A well-designed database, carefully defined procedures, and consultation with legal counsel can greatly reduce the prospect of costly litigation associated with retrenchment. Tenure contracts, case law on financial exigency, due process, and liability are discussed. (Author/LB)

Evaluation of noise limits to improve image processing in soft X-ray projection microscopy.

PubMed

Jamsranjav, Erdenetogtokh; Kuge, Kenichi; Ito, Atsushi; Kinjo, Yasuhito; Shiina, Tatsuo

2017-03-03

Soft X-ray microscopy has been developed for high resolution imaging of hydrated biological specimens due to the availability of water window region. In particular, a projection type microscopy has advantages in wide viewing area, easy zooming function and easy extensibility to computed tomography (CT). The blur of projection image due to the Fresnel diffraction of X-rays, which eventually reduces spatial resolution, could be corrected by an iteration procedure, i.e., repetition of Fresnel and inverse Fresnel transformations. However, it was found that the correction is not enough to be effective for all images, especially for images with low contrast. In order to improve the effectiveness of image correction by computer processing, we in this study evaluated the influence of background noise in the iteration procedure through a simulation study. In the study, images of model specimen with known morphology were used as a substitute for the chromosome images, one of the targets of our microscope. Under the condition that artificial noise was distributed on the images randomly, we introduced two different parameters to evaluate noise effects according to each situation where the iteration procedure was not successful, and proposed an upper limit of the noise within which the effective iteration procedure for the chromosome images was possible. The study indicated that applying the new simulation and noise evaluation method was useful for image processing where background noises cannot be ignored compared with specimen images.

Running SINDA '85/FLUINT interactive on the VAX

NASA Technical Reports Server (NTRS)

Simmonds, Boris

1992-01-01

Computer software as engineering tools are typically run in three modes: Batch, Demand, and Interactive. The first two are the most popular in the SINDA world. The third one is not so popular, due probably to the users inaccessibility to the command procedure files for running SINDA '85, or lack of familiarity with the SINDA '85 execution processes (pre-processor, processor, compilation, linking, execution and all of the file assignment, creation, deletions and de-assignments). Interactive is the mode that makes thermal analysis with SINDA '85 a real-time design tool. This paper explains a command procedure sufficient (the minimum modifications required in an existing demand command procedure) to run SINDA '85 on the VAX in an interactive mode. To exercise the procedure a sample problem is presented exemplifying the mode, plus additional programming capabilities available in SINDA '85. Following the same guidelines the process can be extended to other SINDA '85 residence computer platforms.

Systematic procedure for designing processes with multiple environmental objectives.

PubMed

Kim, Ki-Joo; Smith, Raymond L

2005-04-01

Evaluation of multiple objectives is very important in designing environmentally benign processes. It requires a systematic procedure for solving multiobjective decision-making problems due to the complex nature of the problems, the need for complex assessments, and the complicated analysis of multidimensional results. In this paper, a novel systematic procedure is presented for designing processes with multiple environmental objectives. This procedure has four steps: initialization, screening, evaluation, and visualization. The first two steps are used for systematic problem formulation based on mass and energy estimation and order of magnitude analysis. In the third step, an efficient parallel multiobjective steady-state genetic algorithm is applied to design environmentally benign and economically viable processes and to provide more accurate and uniform Pareto optimal solutions. In the last step a new visualization technique for illustrating multiple objectives and their design parameters on the same diagram is developed. Through these integrated steps the decision-maker can easily determine design alternatives with respect to his or her preferences. Most importantly, this technique is independent of the number of objectives and design parameters. As a case study, acetic acid recovery from aqueous waste mixtures is investigated by minimizing eight potential environmental impacts and maximizing total profit. After applying the systematic procedure, the most preferred design alternatives and their design parameters are easily identified.

ANSI/AIAA S-081A, Pressure Vessel Standards Implementation Guidelines

NASA Technical Reports Server (NTRS)

Greene, Nathanael J.

2009-01-01

The stress rupture specification for Composite Overwrapped Pressure Vessels (COPV) is discussed. The composite shell of the COPV shall be designed to meet the design life considering the time it is under sustained load. A Mechcanical Damage Control Plan (MDCP) shall be created and implemented that assures the COPV will not fail due to mechanical damage due to manufacturing, testing, shipping, installation, or flight. Proven processes and procedures for fabrication and repair shall be used to preclude damage or material degradation during material processing, manufacturing operations, and refurbushment.Selected NDI techniques for the liner and/or boss(es) shall be performed before overwrapping with composite. When visual inspection reveals mechanical damage or defects exceeding manufacturing specification levels (and standard repair procedures), the damaged COPV shall be submitted to a material review board (MRB) for disposition. Every COPV shall be subjected to visual and other non-destructive inspection (NDI), per the inspection plan.

Thermal hydrolysis (TDH) as a pretreatment method for the digestion of organic waste.

PubMed

Schieder, D; Schneider, R; Bischof, F

2000-01-01

The recycling concept under consideration is based on the process of Thermal Hydrolysis (TDH) followed by an anaerobic digestion. By increasing pressure and temperature the organic part of the waste is split up in a first step into short-chain fragments that are biologically well suited for microorganisms. The following fermentation runs much faster and more complete than in conventional digestion processes and the biogas yield is increased. Left is just a small amount of a solid residue that can be easily dewatered and utilized as surrogate fuel for incineration or as compost additive. The thermal hydrolysis process allows a complete energy recovery from organic waste. During the total procedure more energy sources are produced than are needed for running the plant. The procedure is especially suited for wet organic waste and biosolids that are difficult to compost, such as food scraps, biological waste from compact residential areas and sewage sludge. As a complete disinfection is granted due to the process temperatures the procedure is also suited for carcasses.

[Implementation of a rational standard of hygiene for preparation of operating rooms].

PubMed

Bauer, M; Scheithauer, S; Moerer, O; Pütz, H; Sliwa, B; Schmidt, C E; Russo, S G; Waeschle, R M

2015-10-01

The assurance of high standards of care is a major requirement in German hospitals while cost reduction and efficient use of resources are mandatory. These requirements are particularly evident in the high-risk and cost-intensive operating theatre field with multiple process steps. The cleaning of operating rooms (OR) between surgical procedures is of major relevance for patient safety and requires time and human resources. The hygiene procedure plan for OR cleaning between operations at the university hospital in Göttingen was revised and optimized according to the plan-do-check-act principle due to not clearly defined specifications of responsibilities, use of resources, prolonged process times and increased staff engagement. The current status was evaluated in 2012 as part of the first step "plan". The subsequent step "do" included an expert symposium with external consultants, interdisciplinary consensus conferences with an actualization of the former hygiene procedure plan and the implementation process. All staff members involved were integrated into this management change process. The penetration rate of the training and information measures as well as the acceptance and compliance with the new hygiene procedure plan were reviewed within step "check". The rates of positive swabs and air sampling as well as of postoperative wound infections were analyzed for quality control and no evidence for a reduced effectiveness of the new hygiene plan was found. After the successful implementation of these measures the next improvement cycle ("act") was performed in 2014 which led to a simplification of the hygiene plan by reduction of the number of defined cleaning and disinfection programs for preparation of the OR. The reorganization measures described led to a comprehensive commitment of the hygiene procedure plan by distinct specifications for responsibilities, for the course of action and for the use of resources. Furthermore, a simplification of the plan, a rational staff assignment and reduced process times were accomplished. Finally, potential conflicts due to an insufficient evidence-based knowledge of personnel was reduced. This present project description can be used by other hospitals as a guideline for similar changes in management processes.

First Experiences with the New Senhance® Telerobotic System in Visceral Surgery.

PubMed

Stephan, Dietmar; Sälzer, Heike; Willeke, Frank

2018-02-01

Until recently, robotic-assisted surgery has exclusively been connected to the name DaVinci®. In 2016, a second robotic system, the Senhance®, became available. To introduce the new robotic system into clinical routine, detailed team training and an integration program were useful. Within the first 6 months, 116 cases were performed with this system. The integration program intended to start with simple and well-standardized clinical cases. We chose inguinal hernia repair using the TAPP (transabdominal preperitoneal) technique as the starting procedure. Subsequently, we added upper gastrointestinal surgery and cholecystectomies, and colorectal procedures have since also been included. Initial experience with the Senhance system as the first installation in Germany shows that it is suitable for surgery in general and for visceral surgery in particular. The application is safe due to the unproblematically quick changeover to normal laparoscopy and easy to integrate due to the very short system integration times (docking times). Since it is a laparoscopic-based system, following an integration program will enable experienced laparoscopic surgeons to very quickly manage more complex procedures. Due to lower costs, introducing robotic surgery starting with simple and standardized procedures is more feasible. After the establishment of this second robotic system, future studies will have to specifically look at differences in surgical results and basic conditions of different robotic-assisted systems. This paper documents the decision-making process of a hospital towards the integration of a robotic system and the selection criteria used while also demonstrating the planning and execution process during the introduction of the system into clinical routine.

Aggregate and Individual Replication Probability within an Explicit Model of the Research Process

ERIC Educational Resources Information Center

Miller, Jeff; Schwarz, Wolf

2011-01-01

We study a model of the research process in which the true effect size, the replication jitter due to changes in experimental procedure, and the statistical error of effect size measurement are all normally distributed random variables. Within this model, we analyze the probability of successfully replicating an initial experimental result by…

Ensuring due process in the IACUC and animal welfare setting: considerations in developing noncompliance policies and procedures for institutional animal care and use committees and institutional officials.

PubMed

Hansen, Barbara C; Gografe, Sylvia; Pritt, Stacy; Jen, Kai-Lin Catherine; McWhirter, Camille A; Barman, Susan M; Comuzzie, Anthony; Greene, Molly; McNulty, Justin A; Michele, Daniel Eugene; Moaddab, Naz; Nelson, Randall J; Norris, Karen; Uray, Karen D; Banks, Ron; Westlund, Karin N; Yates, Bill J; Silverman, Jerald; Hansen, Kenneth D; Redman, Barbara

2017-10-01

Every institution that is involved in research with animals is expected to have in place policies and procedures for the management of allegations of noncompliance with the Animal Welfare Act and the U.S. Public Health Service Policy on the Humane Care and Use of Laboratory Animals. We present here a model set of recommendations for institutional animal care and use committees and institutional officials to ensure appropriate consideration of allegations of noncompliance with federal Animal Welfare Act regulations that carry a significant risk or specific threat to animal welfare. This guidance has 3 overarching aims: 1 ) protecting the welfare of research animals; 2 ) according fair treatment and due process to an individual accused of noncompliance; and 3 ) ensuring compliance with federal regulations. Through this guidance, the present work seeks to advance the cause of scientific integrity, animal welfare, and the public trust while recognizing and supporting the critical importance of animal research for the betterment of the health of both humans and animals.-Hansen, B. C., Gografe, S., Pritt, S., Jen, K.-L. C., McWhirter, C. A., Barman, S. M., Comuzzie, A., Greene, M., McNulty, J. A., Michele, D. E., Moaddab, N., Nelson, R. J., Norris, K., Uray, K. D., Banks, R., Westlund, K. N., Yates, B. J., Silverman, J., Hansen, K. D., Redman, B. Ensuring due process in the IACUC and animal welfare setting: considerations in developing noncompliance policies and procedures for institutional animal care and use committees and institutional officials. © FASEB.

Contamination-Free Manufacturing: Tool Component Qualification, Verification and Correlation with Wafers

NASA Astrophysics Data System (ADS)

Tan, Samantha H.; Chen, Ning; Liu, Shi; Wang, Kefei

2003-09-01

As part of the semiconductor industry "contamination-free manufacturing" effort, significant emphasis has been placed on reducing potential sources of contamination from process equipment and process equipment components. Process tools contain process chambers and components that are exposed to the process environment or process chemistry and in some cases are in direct contact with production wafers. Any contamination from these sources must be controlled or eliminated in order to maintain high process yields, device performance, and device reliability. This paper discusses new nondestructive analytical methods for quantitative measurement of the cleanliness of metal, quartz, polysilicon and ceramic components that are used in process equipment tools. The goal of these new procedures is to measure the effectiveness of cleaning procedures and to verify whether a tool component part is sufficiently clean for installation and subsequent routine use in the manufacturing line. These procedures provide a reliable "qualification method" for tool component certification and also provide a routine quality control method for reliable operation of cleaning facilities. Cost advantages to wafer manufacturing include higher yields due to improved process cleanliness and elimination of yield loss and downtime resulting from the installation of "bad" components in process tools. We also discuss a representative example of wafer contamination having been linked to a specific process tool component.

Employees.

ERIC Educational Resources Information Center

Beckham, Joseph C.

This chapter analyzes 1982 decisions involving legal issues in public school employment. Cases in areas of federal law are discussed first, including: discrimination in employment (race, sex, religion, age, and handicap); substantive constitutional rights (speech, association, and religion); and procedural due process (property interest, liberty…

When Teachers Falter.

ERIC Educational Resources Information Center

O'Neil, I. Riley; Adamson, David R.

1993-01-01

Administrators cannot avoid disciplining and dismissing teachers who lack the skill to teach or the judgment to conduct themselves professionally. Central office administrators at a Salt Lake City school district developed "corrective discipline" procedures to help principals incorporate just cause, due process, and progressive…

Governance and the Professional School

ERIC Educational Resources Information Center

Kraft, Ivor

1975-01-01

In the future the professional school should be governed according to strictly democratic procedures with shared powers among all the constituencies, limited tenure in all administrative posts, and provisions for due process and grievance machinery to handle all academic complaints. (Editor/KE)

Due process model of procedural justice in performance appraisal: promotion versus termination scenarios.

PubMed

Kataoka, Heloneida C; Cole, Nina D; Flint, Douglas A

2006-12-01

In a laboratory study, 318 student participants (148 male, 169 female, and one who did not report sex; M age 25.0, SD = 6.0) in introductory organizational behavior classes responded to scenarios in which performance appraisal resulted in either employee promotion or termination. Each scenario had varying levels of three procedural justice criteria for performance appraisal. For both promotion and termination outcomes, analysis showed that, as the number of criteria increased, perceptions of procedural fairness increased. A comparison between the two outcomes showed that perceptions of fairness were significantly stronger for the promotion outcome than for termination.

Reliability based fatigue design and maintenance procedures

NASA Technical Reports Server (NTRS)

Hanagud, S.

1977-01-01

A stochastic model has been developed to describe a probability for fatigue process by assuming a varying hazard rate. This stochastic model can be used to obtain the desired probability of a crack of certain length at a given location after a certain number of cycles or time. Quantitative estimation of the developed model was also discussed. Application of the model to develop a procedure for reliability-based cost-effective fail-safe structural design is presented. This design procedure includes the reliability improvement due to inspection and repair. Methods of obtaining optimum inspection and maintenance schemes are treated.

Quantification of Processing Effects on Filament Wound Pressure Vessels

NASA Technical Reports Server (NTRS)

Aiello, Robert A.; Chamis, Christos C.

1999-01-01

A computational simulation procedure is described which is designed specifically for the modeling and analysis of filament wound pressure vessels. Cylindrical vessels with spherical or elliptical end caps can be generated automatically. End caps other than spherical or elliptical may be modeled by varying circular sections along the x-axis according to the C C! end cap shape. The finite element model generated is composed of plate type quadrilateral shell elements on the entire vessel surface. This computational procedure can also be sued to generate grid, connectivity and material cards (bulk data) for component parts of a larger model. These bulk data are assigned to a user designated file for finite element structural/stress analysis of composite pressure vessels. The procedure accommodates filament would pressure vessels of all types of shells-of-revolution. It has provisions to readily evaluate initial stresses due to pretension in the winding filaments and residual stresses due to cure temperature.

Quantification of Processing Effects on Filament Wound Pressure Vessels. Revision

NASA Technical Reports Server (NTRS)

Aiello, Robert A.; Chamis, Christos C.

2002-01-01

A computational simulation procedure is described which is designed specifically for the modeling and analysis of filament wound pressure vessels. Cylindrical vessels with spherical or elliptical end caps can be generated automatically. End caps other than spherical or elliptical may be modeled by varying circular sections along the x-axis according to the end cap shape. The finite element model generated is composed of plate type quadrilateral shell elements on the entire vessel surface. This computational procedure can also be used to generate grid, connectivity and material cards (bulk data) for component parts of a larger model. These bulk data are assigned to a user designated file for finite element structural/stress analysis of composite pressure vessels. The procedure accommodates filament wound pressure vessels of all types of shells-of -revolution. It has provisions to readily evaluate initial stresses due to pretension in the winding filaments and residual stresses due to cure temperature.

38 CFR 3.103 - Procedural due process and appellate rights.

Code of Federal Regulations, 2013 CFR

2013-07-01

... VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation...) of this section, no award of compensation, pension or dependency and indemnity compensation shall be... on factual and unambiguous information or statements as to income, net worth, or dependency or...

38 CFR 3.103 - Procedural due process and appellate rights.

Code of Federal Regulations, 2012 CFR

2012-07-01

... VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation...) of this section, no award of compensation, pension or dependency and indemnity compensation shall be... on factual and unambiguous information or statements as to income, net worth, or dependency or...

38 CFR 3.103 - Procedural due process and appellate rights.

Code of Federal Regulations, 2014 CFR

2014-07-01

... VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation...) of this section, no award of compensation, pension or dependency and indemnity compensation shall be... on factual and unambiguous information or statements as to income, net worth, or dependency or...

What About Legal Literacy?

ERIC Educational Resources Information Center

Taylor, Kelly R.

2001-01-01

A brief list of basic legal concepts and terms to help principals become more familiar with some of the Constitutional and statutory procedural and substantive aspects of school law, including, for example, concepts like due process and privacy and terms like En Banc and De Facto. (PKP)

Student Rights and Responsibilities

ERIC Educational Resources Information Center

Today's Education, 1972

1972-01-01

Article summarizes National Education Association pamphlet. As citizens, students should have full protection of Bill of Rights, due process, protection from illegal search or seizure. As clients of institution, should have substantial influence on how institutions affect their lives. Proper disciplinary procedures for minor and major infractions…

Different matrix evaluation for the bone regeneration of rats' femours using time domain optical coherence tomography

NASA Astrophysics Data System (ADS)

Rusu, Laura-Cristina; Negrutiu, Meda Lavinia; Sinescu, Cosmin; Hoinoiu, Bogdan; Zaharia, Cristian; Ardelean, Lavinia; Duma, Virgil-Florin; Podoleanu, Adrian G.

2014-01-01

The osteoconductive materials are important in bone regeneration procedures. Three dimensional (3D) reconstructions were obtained from the analysis. The aim of this study is to investigate the interface between the femur rat bone and the new bone that is obtained using a method of tissue engineering that is based on two artificial matrixes inserted in previously artificially induced defects. For this study, under strict supervision 20 rats were used in conformity with ethical procedures. In all the femurs a round defect was induced by drilling with a 1 mm spherical Co-Cr surgical drill. The matrixes used were IngeniOss (for ten samples) and 4Bone(for the other ten samples). These materials were inserted into the induced defects. The femurs were investigated at 1 month, after the surgical procedures. The interfaces were examined using Time Domain (TD) Optical Coherence Tomography (OCT) combined with Confocal Microscopy (CM). The scanning procedure is similar to that used in any CM, where the fast scanning is en-face (line rate) and the scanning in depth is much slower (at the frame rate). The optical configuration uses two single mode directional couplers with a superluminiscent diode as the source centered at 1300 nm. The results showed open interfaces due to the insufficient healing process, as well as closed interfaces due to a new bone formation inside the defect. The conclusion of this study is that TD-OCT can act as a valuable tool in the investigation of the interface between the old bone and the one that has been newly created due to the osteoinductive process. The TD-OCT has proven a valuable tool for the non-invasive evaluation of the matrix bone interfaces.

Platelet Rich Plasma: New Insights for Cutaneous Wound Healing Management

PubMed Central

Chicharro-Alcántara, Deborah; Damiá-Giménez, Elena; Carrillo-Poveda, José M.; Peláez-Gorrea, Pau

2018-01-01

The overall increase of chronic degenerative diseases associated with ageing makes wound care a tremendous socioeconomic burden. Thus, there is a growing need to develop novel wound healing therapies to improve cutaneous wound healing. The use of regenerative therapies is becoming increasingly popular due to the low-invasive procedures needed to apply them. Platelet-rich plasma (PRP) is gaining interest due to its potential to stimulate and accelerate the wound healing process. The cytokines and growth factors forming PRP play a crucial role in the healing process. This article reviews the emerging field of skin wound regenerative therapies with particular emphasis on PRP and the role of growth factors in the wound healing process. PMID:29346333

A Systems Modeling Approach for Risk Management of Command File Errors

NASA Technical Reports Server (NTRS)

Meshkat, Leila

2012-01-01

The main cause of commanding errors is often (but not always) due to procedures. Either lack of maturity in the processes, incompleteness of requirements or lack of compliance to these procedures. Other causes of commanding errors include lack of understanding of system states, inadequate communication, and making hasty changes in standard procedures in response to an unexpected event. In general, it's important to look at the big picture prior to making corrective actions. In the case of errors traced back to procedures, considering the reliability of the process as a metric during its' design may help to reduce risk. This metric is obtained by using data from Nuclear Industry regarding human reliability. A structured method for the collection of anomaly data will help the operator think systematically about the anomaly and facilitate risk management. Formal models can be used for risk based design and risk management. A generic set of models can be customized for a broad range of missions.

Algorithm for Video Summarization of Bronchoscopy Procedures

PubMed Central

2011-01-01

Background The duration of bronchoscopy examinations varies considerably depending on the diagnostic and therapeutic procedures used. It can last more than 20 minutes if a complex diagnostic work-up is included. With wide access to videobronchoscopy, the whole procedure can be recorded as a video sequence. Common practice relies on an active attitude of the bronchoscopist who initiates the recording process and usually chooses to archive only selected views and sequences. However, it may be important to record the full bronchoscopy procedure as documentation when liability issues are at stake. Furthermore, an automatic recording of the whole procedure enables the bronchoscopist to focus solely on the performed procedures. Video recordings registered during bronchoscopies include a considerable number of frames of poor quality due to blurry or unfocused images. It seems that such frames are unavoidable due to the relatively tight endobronchial space, rapid movements of the respiratory tract due to breathing or coughing, and secretions which occur commonly in the bronchi, especially in patients suffering from pulmonary disorders. Methods The use of recorded bronchoscopy video sequences for diagnostic, reference and educational purposes could be considerably extended with efficient, flexible summarization algorithms. Thus, the authors developed a prototype system to create shortcuts (called summaries or abstracts) of bronchoscopy video recordings. Such a system, based on models described in previously published papers, employs image analysis methods to exclude frames or sequences of limited diagnostic or education value. Results The algorithm for the selection or exclusion of specific frames or shots from video sequences recorded during bronchoscopy procedures is based on several criteria, including automatic detection of "non-informative", frames showing the branching of the airways and frames including pathological lesions. Conclusions The paper focuses on the challenge of generating summaries of bronchoscopy video recordings. PMID:22185344

Fabrication of ф 160 mm convex hyperbolic mirror for remote sensing instrument

NASA Astrophysics Data System (ADS)

Kuo, Ching-Hsiang; Yu, Zong-Ru; Ho, Cheng-Fang; Hsu, Wei-Yao; Chen, Fong-Zhi

2012-10-01

In this study, efficient polishing processes with inspection procedures for a large convex hyperbolic mirror of Cassegrain optical system are presented. The polishing process combines the techniques of conventional lapping and CNC polishing. We apply the conventional spherical lapping process to quickly remove the sub-surface damage (SSD) layer caused by grinding process and to get the accurate radius of best-fit sphere (BFS) of aspheric surface with fine surface texture simultaneously. Thus the removed material for aspherization process can be minimized and the polishing time for SSD removal can also be reduced substantially. The inspection procedure was carried out by using phase shift interferometer with CGH and stitching technique. To acquire the real surface form error of each sub aperture, the wavefront errors of the reference flat and CGH flat due to gravity effect of the vertical setup are calibrated in advance. Subsequently, we stitch 10 calibrated sub-aperture surface form errors to establish the whole irregularity of the mirror in 160 mm diameter for correction polishing. The final result of the In this study, efficient polishing processes with inspection procedures for a large convex hyperbolic mirror of Cassegrain optical system are presented. The polishing process combines the techniques of conventional lapping and CNC polishing. We apply the conventional spherical lapping process to quickly remove the sub-surface damage (SSD) layer caused by grinding process and to get the accurate radius of best-fit sphere (BFS) of aspheric surface with fine surface texture simultaneously. Thus the removed material for aspherization process can be minimized and the polishing time for SSD removal can also be reduced substantially. The inspection procedure was carried out by using phase shift interferometer with CGH and stitching technique. To acquire the real surface form error of each sub aperture, the wavefront errors of the reference flat and CGH flat due to gravity effect of the vertical setup are calibrated in advance. Subsequently, we stitch 10 calibrated sub-aperture surface form errors to establish the whole irregularity of the mirror in 160 mm diameter for correction polishing. The final result of the Fabrication of ф160 mm Convex Hyperbolic Mirror for Remote Sensing Instrument160 mm convex hyperbolic mirror is 0.15 μm PV and 17.9 nm RMS.160 mm convex hyperbolic mirror is 0.15 μm PV and 17.9 nm RMS.

Microstructure based procedure for process parameter control in rolling of aluminum thin foils

NASA Astrophysics Data System (ADS)

Johannes, Kronsteiner; Kabliman, Evgeniya; Klimek, Philipp-Christoph

2018-05-01

In present work, a microstructure based procedure is used for a numerical prediction of strength properties for Al-Mg-Sc thin foils during a hot rolling process. For this purpose, the following techniques were developed and implemented. At first, a toolkit for a numerical analysis of experimental stress-strain curves obtained during a hot compression testing by a deformation dilatometer was developed. The implemented techniques allow for the correction of a temperature increase in samples due to adiabatic heating and for the determination of a yield strength needed for the separation of the elastic and plastic deformation regimes during numerical simulation of multi-pass hot rolling. At the next step, an asymmetric Hot Rolling Simulator (adjustable table inlet/outlet height as well as separate roll infeed) was developed in order to match the exact processing conditions of a semi-industrial rolling procedure. At each element of a finite element mesh the total strength is calculated by in-house Flow Stress Model based on evolution of mean dislocation density. The strength values obtained by numerical modelling were found in a reasonable agreement with results of tensile tests for thin Al-Mg-Sc foils. Thus, the proposed simulation procedure might allow to optimize the processing parameters with respect to the microstructure development.

Student Discipline Data Tracker v.1

ERIC Educational Resources Information Center

Steel, Lawrence E.

2005-01-01

One of the most difficult tasks facing today's busy school administrative teams is tracking and managing student discipline. Administrators must balance the rights of students with cultivating classroom environments conducive to learning. Breakdowns in communication, procedure, and due process can lead to unpleasant situations, and ultimately, a…

76 FR 20032 - Thomas E. Mitchell, M.D.; Dismissal of Proceeding

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... DEPARTMENT OF JUSTICE Drug Enforcement Administration [Docket No. 10-7] Thomas E. Mitchell, M.D.; Dismissal of Proceeding On September 11, 2009, the Deputy Assistant Administrator, Office of Diversion... procedural misconduct, misrepresentations and the subsequent illegitimate denial of due process.'' Id. On...

Recollection and familiarity in amnesic mild cognitive impairment.

PubMed

Serra, Laura; Bozzali, Marco; Cercignani, Mara; Perri, Roberta; Fadda, Lucia; Caltagirone, Carlo; Carlesimo, Giovanni A

2010-05-01

To investigate whether, in patients with amnesic mild cognitive impairment (a-MCI), recognition deficits are mainly due to a selective impairment of recollection rather than familiarity. Nineteen patients with a-MCI and 23 sex-, age-, and education-matched healthy controls underwent two experimental investigations, using the Process Dissociation Procedure (PDP) and the Remember/Know (R/K) procedure, to assess the differential contribution of recollection and familiarity to their recognition performance. Both experimental procedures revealed a selective preservation of familiarity in a-MCI patients. Moreover, the R/K procedure showed a statistically significant impairment of recollection in a-MCI patients for words that were either read or anagrammed during the study phase. A-MCI is known to be commonly associated with a high risk of conversion to Alzheimer's disease (AD). Several previous studies have demonstrated a characteristic impairment of episodic memory in a-MCI, with an early dysfunction of recognition. Our findings are consistent with the knowledge of neurodegeneration occurring in AD, which is characterized, at the earliest disease stages, by a selective involvement of the entorhinal cortex. Moreover, the current study supports the dual process model of recognition, which hypothesizes recollection and familiarity to be independent processes associated with distinct anatomical substrates.

Integrating SAR and derived products into operational volcano monitoring and decision support systems

NASA Astrophysics Data System (ADS)

Meyer, F. J.; McAlpin, D. B.; Gong, W.; Ajadi, O.; Arko, S.; Webley, P. W.; Dehn, J.

2015-02-01

Remote sensing plays a critical role in operational volcano monitoring due to the often remote locations of volcanic systems and the large spatial extent of potential eruption pre-cursor signals. Despite the all-weather capabilities of radar remote sensing and its high performance in monitoring of change, the contribution of radar data to operational monitoring activities has been limited in the past. This is largely due to: (1) the high costs associated with radar data; (2) traditionally slow data processing and delivery procedures; and (3) the limited temporal sampling provided by spaceborne radars. With this paper, we present new data processing and data integration techniques that mitigate some of these limitations and allow for a meaningful integration of radar data into operational volcano monitoring decision support systems. Specifically, we present fast data access procedures as well as new approaches to multi-track processing that improve near real-time data access and temporal sampling of volcanic systems with SAR data. We introduce phase-based (coherent) and amplitude-based (incoherent) change detection procedures that are able to extract dense time series of hazard information from these data. For a demonstration, we present an integration of our processing system with an operational volcano monitoring system that was developed for use by the Alaska Volcano Observatory (AVO). Through an application to a historic eruption, we show that the integration of SAR into systems such as AVO can significantly improve the ability of operational systems to detect eruptive precursors. Therefore, the developed technology is expected to improve operational hazard detection, alerting, and management capabilities.

An integer batch scheduling model considering learning, forgetting, and deterioration effects for a single machine to minimize total inventory holding cost

NASA Astrophysics Data System (ADS)

Yusriski, R.; Sukoyo; Samadhi, T. M. A. A.; Halim, A. H.

2018-03-01

This research deals with a single machine batch scheduling model considering the influenced of learning, forgetting, and machine deterioration effects. The objective of the model is to minimize total inventory holding cost, and the decision variables are the number of batches (N), batch sizes (Q[i], i = 1, 2, .., N) and the sequence of processing the resulting batches. The parts to be processed are received at the right time and the right quantities, and all completed parts must be delivered at a common due date. We propose a heuristic procedure based on the Lagrange method to solve the problem. The effectiveness of the procedure is evaluated by comparing the resulting solution to the optimal solution obtained from the enumeration procedure using the integer composition technique and shows that the average effectiveness is 94%.

Disciplinary versus Academic Sanctions in Higher Education: A Doomed Dichotomy?

ERIC Educational Resources Information Center

Dutile, Fernand N.

2003-01-01

Explains that courts have generally subjected disciplinary action to procedural due process under the Fourteenth Amendment, while academic sanctions have garnered greater deference. Examines the judicial history of this dual track, establishes the difficulty of characterizing as either disciplinary or academic the countless situations reflecting…

School Discipline: Special Issues. School Management Handbook Number 2.

ERIC Educational Resources Information Center

National Association of Elementary School Principals, Arlington, VA.

This part of the School Management Handbook provides the elementary school administrator with an overview of civil rights issues affecting school discipline policy. The first section treats the requirements for providing due process and avoiding discrimination against minority groups when following disciplinary procedures. Section 2 covers…

Discipline and Due Process.

ERIC Educational Resources Information Center

Collins, Mildred; Dowell, Mary L.

1998-01-01

Increasing numbers of parents do not accept a school's discipline policy and are refusing to permit their children to comply with disciplinary sanctions. According to the California Education Code, educators have the right to expect parents to accept disciplinary decisions made in compliance with required procedures. Parental defiance might worsen…

Legal Bibliography for Juvenile and Family Courts. Supplement 2.

ERIC Educational Resources Information Center

Sheridan, William H.; Freer, Alice B.

This bibliography provides a listing of journal articles on such topics as: the abused child, adoptions, case decisions, confessions, constitutional law, counsel, court administration and organization, courts, criminal law and procedure, custody, delinquency, domestic relations, due process for juveniles, evidence, family court and family law,…

Reimbursement of biosimilars in Poland: is there a link to health technology assessment?

PubMed

Neumann, Dominika; Jabłecka, Anna

2016-12-01

Due to their complex structures, biosimilars are not generics. The differences between them are considered during market authorization processes but remain unclear during reimbursement decision-making. We analyzed the reimbursement of biopharmaceuticals in Poland with an emphasis on biosimilars and compared the health technology assessment (HTA) process with that defined in other countries. Recommendations provided by the Polish HTA organization and those in other countries were included as source documents. The period of interest covered January 2012 to December 2014. The reimbursement process for biosimilars in Poland is the same as that for generics. In contrast to other countries, a HTA is not involved in decision-making in Poland. The short administrative procedure for reimbursement of biosimilars in Poland accelerates the decision-making process; therefore, therapies can be made available to patients more quickly. However, this procedure can potentially lead to underestimation of aspects concerning the effectiveness and safety of biosimilars.

PLAN-TA9-2443(U), Rev. B Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Geoffrey Wayne

2016-03-16

This document identifies scope and some general procedural steps for performing Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing. This Test Plan describes the requirements, responsibilities, and process for preparing and testing a range of chemical surrogates intended to mimic the energetic response of waste created during processing of legacy nitrate salts. The surrogates developed are expected to bound1 the thermal and mechanical sensitivity of such waste, allowing for the development of process parameters required to minimize the risk to worker and public when processing this waste. Such parameters will be based on the worst-case kinetic parameters as derived frommore » APTAC measurements as well as the development of controls to mitigate sensitivities that may exist due to friction, impact, and spark. This Test Plan will define the scope and technical approach for activities that implement Quality Assurance requirements relevant to formulation and testing.« less

KSC-97pc762

NASA Image and Video Library

1997-05-01

KENNEDY SPACE CENTER, FLA. -- KSC payloads processing employees work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the Space Shuttle Orbiter Columbia’s payload bay for the STS-94 mission in Orbiter Processing Facility 1. That mission is now scheduled to lift off in early July. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

KSC-97pc763

NASA Image and Video Library

1997-05-01

KENNEDY SPACE CENTER, FLA. -- KSC payloads processing employees work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the Space Shuttle Orbiter Columbia’s payload bay for the STS-94 mission in Orbiter Processing Facility 1. That mission is now scheduled to lift off in early July. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

KSC-97pc761

NASA Image and Video Library

1997-05-01

KSC payloads processing employees work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the Space Shuttle Orbiter Columbia’s payload bay for the STS-94 mission in Orbiter Processing Facility 1. That mission is now scheduled to lift off in early July. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

Fault detection in heavy duty wheels by advanced vibration processing techniques and lumped parameter modeling

NASA Astrophysics Data System (ADS)

Malago`, M.; Mucchi, E.; Dalpiaz, G.

2016-03-01

Heavy duty wheels are used in applications such as automatic vehicles and are mainly composed of a polyurethane tread glued to a cast iron hub. In the manufacturing process, the adhesive application between tread and hub is a critical assembly phase, since it is completely made by an operator and a contamination of the bond area may happen. Furthermore, the presence of rust on the hub surface can contribute to worsen the adherence interface, reducing the operating life. In this scenario, a quality control procedure for fault detection to be used at the end of the manufacturing process has been developed. This procedure is based on vibration processing techniques and takes advantages of the results of a lumped parameter model. Indicators based on cyclostationarity can be considered as key parameters to be adopted in a monitoring test station at the end of the production line due to their not deterministic characteristics.

21 CFR 60.44 - Hearing procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RESTORATION Due Diligence Hearings § 60.44 Hearing procedures. The due diligence hearing shall be conducted in accordance with this part, supplemented by the nonconflicting procedures in part 16. During the due diligence... requesting a hearing under part 16. The standard of due diligence set forth in § 60.36 will apply in the due...

Evaluation of anomalies observed on film from S-190A flight system calibration test

NASA Technical Reports Server (NTRS)

Bourque, P. F.; Perry, L.; Sauer, G. E.

1975-01-01

Due to a persistent problem of scratched film from testing of the Skylab S-190A system, a series of tests were designed to identify the cause of the film scratching. The procedures followed in this test for pretest handling and packaging of the film, the makeup of the rolls for processing, and the results of the processed film evaluation are reported.

Reliability Stress-Strength Models for Dependent Observations with Applications in Clinical Trials

NASA Technical Reports Server (NTRS)

Kushary, Debashis; Kulkarni, Pandurang M.

1995-01-01

We consider the applications of stress-strength models in studies involving clinical trials. When studying the effects and side effects of certain procedures (treatments), it is often the case that observations are correlated due to subject effect, repeated measurements and observing many characteristics simultaneously. We develop maximum likelihood estimator (MLE) and uniform minimum variance unbiased estimator (UMVUE) of the reliability which in clinical trial studies could be considered as the chances of increased side effects due to a particular procedure compared to another. The results developed apply to both univariate and multivariate situations. Also, for the univariate situations we develop simple to use lower confidence bounds for the reliability. Further, we consider the cases when both stress and strength constitute time dependent processes. We define the future reliability and obtain methods of constructing lower confidence bounds for this reliability. Finally, we conduct simulation studies to evaluate all the procedures developed and also to compare the MLE and the UMVUE.

42 CFR 457.915 - Fraud detection and investigation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and abuse cases. (2) Methods for investigating fraud and abuse cases that— (i) Do not infringe on legal rights of persons involved; and (ii) Afford due process of law. (b) State program integrity unit... implement procedures for referring suspected fraud and abuse cases to the State program integrity unit (if...

The Legal Implications of Administrative Decision-Making.

ERIC Educational Resources Information Center

Bender, Louis W.

Administrative decision-making encompasses three levels on which increasing legal challenges and liability and their implications need to be considered. At the local level, this may involve violations of procedural due process. A second level concerns state laws and regulations. Line administrators, who frequently make decisions on programs,…

16 CFR 1025.1 - Scope of rules.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Constitutional due process rights of all parties. It is anticipated that in any adjudicative proceedings for the... PROCEEDINGS Scope of Rules, Nature of Adjudicative Proceedings, Definitions § 1025.1 Scope of rules. The rules in this part govern procedures in adjudicative proceedings relating to the provisions of section 15...

An Overview of Legal Principles and Issues Affecting Postsecondary Athletics.

ERIC Educational Resources Information Center

Kaplin, William A.

1977-01-01

Discussions of procedural due process, first amendment rights, sex discrimination, tort law, discrimination on the basis of handicap, and legal principles regarding athletic associations and conferences indicate the wide range of legal principles to which postsecondary athletic programs are subject. Sex discrimination is noted as a major issue in…

Disciplinary and Academic Decisions Pertaining to Students: A Review of the 1995 Judicial Decisions.

ERIC Educational Resources Information Center

Pavela, Gary

1997-01-01

Reviews 1995 case law concerning constitutional due process in college student disciplinary cases. Finds that administrators should follow substantive and procedural rules carefully; disciplinary determinations should not substitute for academic judgments; academic dishonesty should be treated as a disciplinary offense; internships and clinical…

Application of Competency Testing Mandates to Handicapped Children.

ERIC Educational Resources Information Center

McCarthy, Martha M.

1983-01-01

The author considers the legality of minimum competency testing diploma requirements applied to the handicapped in light of (1) their constitutional and statutory rights to nondiscriminatory treatment, (2) their statutory right to an appropriate education, and (3) their constitutional right to substantive and procedural due process. (Author/SSH)

Demand Characteristics, Moods, and Helping

ERIC Educational Resources Information Center

Wispe, Lauren; And Others

1977-01-01

Procedures used in empathy-helping studies suggest results may be due to demand characteristics. Two studies were run to investigate especially the mood induction process. One reproduced the Aderman-Berkowitz main mood effects. Another showed that after seeing a help-non-help incident, mood effects were demonstrated only when Ss knew the research…

45 CFR 400.58 - Content and submission of public/private RCA plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... RESETTLEMENT, ADMINISTRATION FOR CHILDREN AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE... services; (6) A description of the procedures to be used to ensure appropriate protections and due process for refugees, such as the correction of underpayments, notice of adverse action and the right to...

With Preparation, You Can Clear the Teacher Termination Hurdles.

ERIC Educational Resources Information Center

MacNaughton, Robert; Ross, Victor J.

1982-01-01

Maintains that, contrary to popular opinion, it is possible to fire incompetent teachers, as long as administrators know how to provide both substantive and procedural due process, follow state tenure laws or continuing contract laws, follow the collective bargaining agreement, and conduct and write a fair teacher evaluation. (JM)

Disciplinary Counseling: The First Step toward Due Process.

ERIC Educational Resources Information Center

Cunningham, Patrick J.

1980-01-01

The oral reprimand is seen as the most important step in a corrective discipline procedure. Steps of disciplinary counseling include: always counsel in a private place; identify the problem; identify the desired behavior; define the consequences; get commitment from employee; identify session as oral reprimand; and monitor and follow up.(MLW)

Student Disciplinary Codes -- What Makes Them Tick.

ERIC Educational Resources Information Center

Johnson, Donald V.

In this speech, the author describes how one school developed discipline guidelines with the cooperation of staff, parents, and students. Due process procedures, types of discipline, and an alternative out-of-school program for adjustment students (those who have experienced chronic or serious disciplinary problems in the school) are described.…

A Focusing Method in the Calibration Process of Image Sensors Based on IOFBs

PubMed Central

Fernández, Pedro R.; Lázaro, José L.; Gardel, Alfredo; Cano, Ángel E.; Bravo, Ignacio

2010-01-01

A focusing procedure in the calibration process of image sensors based on Incoherent Optical Fiber Bundles (IOFBs) is described using the information extracted from fibers. These procedures differ from any other currently known focusing method due to the non spatial in-out correspondence between fibers, which produces a natural codification of the image to transmit. Focus measuring is essential prior to carrying out calibration in order to guarantee accurate processing and decoding. Four algorithms have been developed to estimate the focus measure; two methods based on mean grey level, and the other two based on variance. In this paper, a few simple focus measures are defined and compared. Some experimental results referred to the focus measure and the accuracy of the developed methods are discussed in order to demonstrate its effectiveness. PMID:22315526

Optimization of flexible wing structures subject to strength and induced drag constraints

NASA Technical Reports Server (NTRS)

Haftka, R. T.

1977-01-01

An optimization procedure for designing wing structures subject to stress, strain, and drag constraints is presented. The optimization method utilizes an extended penalty function formulation for converting the constrained problem into a series of unconstrained ones. Newton's method is used to solve the unconstrained problems. An iterative analysis procedure is used to obtain the displacements of the wing structure including the effects of load redistribution due to the flexibility of the structure. The induced drag is calculated from the lift distribution. Approximate expressions for the constraints used during major portions of the optimization process enhance the efficiency of the procedure. A typical fighter wing is used to demonstrate the procedure. Aluminum and composite material designs are obtained. The tradeoff between weight savings and drag reduction is investigated.

Neural changes associated to procedural learning and automatization process in Developmental Coordination Disorder and/or Developmental Dyslexia.

PubMed

Biotteau, Maëlle; Péran, Patrice; Vayssière, Nathalie; Tallet, Jessica; Albaret, Jean-Michel; Chaix, Yves

2017-03-01

Recent theories hypothesize that procedural learning may support the frequent overlap between neurodevelopmental disorders. The neural circuitry supporting procedural learning includes, among others, cortico-cerebellar and cortico-striatal loops. Alteration of these loops may account for the frequent comorbidity between Developmental Coordination Disorder (DCD) and Developmental Dyslexia (DD). The aim of our study was to investigate cerebral changes due to the learning and automatization of a sequence learning task in children with DD, or DCD, or both disorders. fMRI on 48 children (aged 8-12) with DD, DCD or DD + DCD was used to explore their brain activity during procedural tasks, performed either after two weeks of training or in the early stage of learning. Firstly, our results indicate that all children were able to perform the task with the same level of automaticity, but recruit different brain processes to achieve the same performance. Secondly, our fMRI results do not appear to confirm Nicolson and Fawcett's model. The neural correlates recruited for procedural learning by the DD and the comorbid groups are very close, while the DCD group presents distinct characteristics. This provide a promising direction on the neural mechanisms associated with procedural learning in neurodevelopmental disorders and for understanding comorbidity. Published by Elsevier Ltd.

Customized data container for improved performance in optical cryptosystems

NASA Astrophysics Data System (ADS)

Vélez Zea, Alejandro; Fredy Barrera, John; Torroba, Roberto

2016-12-01

Coherent optical encryption procedures introduce speckle noise to the output, limiting many practical applications. Until now the only method available to avoid this noise is to codify the information to be processed into a container that is encrypted instead of the original data. Although the decrypted container presents the noise due to the optical processing, their features remain recognizable enough to allow decoding, bringing the original information free of any kind of degradation. The first adopted containers were the quick response (QR) codes. However, the limitations of optical encryption procedures and the features of QR codes imply that in practice only simple codes containing small amounts of data can be processed without large experimental requirements. In order to overcome this problem, we introduce the first tailor made container to be processed in optical cryptosystems, ensuring larger noise tolerance and the ability to process more information with less experimental requirements. We present both simulations and experimental results to demonstrate the advantages of our proposal.

A linearized theory method of constrained optimization for supersonic cruise wing design

NASA Technical Reports Server (NTRS)

Miller, D. S.; Carlson, H. W.; Middleton, W. D.

1976-01-01

A linearized theory wing design and optimization procedure which allows physical realism and practical considerations to be imposed as constraints on the optimum (least drag due to lift) solution is discussed and examples of application are presented. In addition to the usual constraints on lift and pitching moment, constraints are imposed on wing surface ordinates and wing upper surface pressure levels and gradients. The design procedure also provides the capability of including directly in the optimization process the effects of other aircraft components such as a fuselage, canards, and nacelles.

Enhanced job control language procedures for the SIMSYS2D two-dimensional water-quality simulation system

USGS Publications Warehouse

Karavitis, G.A.

1984-01-01

The SIMSYS2D two-dimensional water-quality simulation system is a large-scale digital modeling software system used to simulate flow and transport of solutes in freshwater and estuarine environments. Due to the size, processing requirements, and complexity of the system, there is a need to easily move the system and its associated files between computer sites when required. A series of job control language (JCL) procedures was written to allow transferability between IBM and IBM-compatible computers. (USGS)

Legal basis of the Advanced Therapies Regulation.

PubMed

Jekerle, V; Schröder, C; Pedone, E

2010-01-01

Advanced therapy medicinal products consist of gene therapy, somatic cell therapy and tissue engineered products. Due to their specific manufacturing process and mode of action these products require specially tailored legislation. With Regulation (EC) No. 1394/2007, these needs have been met. Definitions of gene therapy, somatic cell therapy and tissue engineered products were laid down. A new committee, the Committee for Advanced Therapies, was founded, special procedures such as the certification procedure for small- and medium-sized enterprises were established and the technical requirements for Marketing Authorisation Applications (quality, non-clinical and clinical) were revised.

The Transverse Musculocutaneous Gracilis Flap for Breast Reconstruction Educational Illustration Series

NASA Astrophysics Data System (ADS)

Steenberg, Ryan

Advancements in medicine have allowed surgeons a menu of options in post-mastectomy breast reconstruction. A conundrum exists, however, in flap selection when faced with varying patient body types. In the case of the athletic patient who does not have the appropriate amount of donor site tissue to warrant a Transverse Rectus Abdominus Musculocutaneuos Flap (TRAM) the Transverse Musculocutaneous Gracilis Flap (TMG) is an appropriate alternative due to its functional and aesthetic benefits. An intricate and timely process, the TMG procedure can be difficult to understand for the layperson. Therefore, a need for a condensed and standardized description exists. By breaking the process down and illustrating the procedure one can effectively deliver the information for use across all realms of publication and education.

Transboundary EIA: Iberian experiences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albergaria, Rita; Fidelis, Teresa

2006-10-15

The 1314 km border shared by Portugal and Spain is simultaneously a conflict generator, due to joint access to common resources such as water, and a motive for transboundary cooperation in terms of development projects based on common concerns. Transboundary cooperation associated with Environment Impact Assessment (EIA) has been encouraged through the enactment of the Espoo Convention (1997). The European Union has adopted a Directive (97/11/CE Directive) under which taking transboundary impacts into consideration during EIA processes has become mandatory for member states. As a consequence, Portugal and Spain have approved related provisions. This paper aims to critically analyse themore » legal and procedural features of bilateral cooperation through the comparison of two case studies related to water management projects (the Sela and Alqueva dams). The paper highlights procedural weaknesses and puts forward a 'Good Practice Model' for cooperation under transboundary EIA processes. The model focuses on the ways in which EIA-based bilateral cooperation should proceed through the specification of phases and procedures for collaboration between Portugal and Spain in the identification and evaluation of transboundary impacts, as well in the public participation procedures.« less

Fermentation process tracking through enhanced spectral calibration modeling.

PubMed

Triadaphillou, Sophia; Martin, Elaine; Montague, Gary; Norden, Alison; Jeffkins, Paul; Stimpson, Sarah

2007-06-15

The FDA process analytical technology (PAT) initiative will materialize in a significant increase in the number of installations of spectroscopic instrumentation. However, to attain the greatest benefit from the data generated, there is a need for calibration procedures that extract the maximum information content. For example, in fermentation processes, the interpretation of the resulting spectra is challenging as a consequence of the large number of wavelengths recorded, the underlying correlation structure that is evident between the wavelengths and the impact of the measurement environment. Approaches to the development of calibration models have been based on the application of partial least squares (PLS) either to the full spectral signature or to a subset of wavelengths. This paper presents a new approach to calibration modeling that combines a wavelength selection procedure, spectral window selection (SWS), where windows of wavelengths are automatically selected which are subsequently used as the basis of the calibration model. However, due to the non-uniqueness of the windows selected when the algorithm is executed repeatedly, multiple models are constructed and these are then combined using stacking thereby increasing the robustness of the final calibration model. The methodology is applied to data generated during the monitoring of broth concentrations in an industrial fermentation process from on-line near-infrared (NIR) and mid-infrared (MIR) spectrometers. It is shown that the proposed calibration modeling procedure outperforms traditional calibration procedures, as well as enabling the identification of the critical regions of the spectra with regard to the fermentation process.

Principles Supporting the Perceptional Teaching of Physics: A ``Practical Teaching Philosophy''

NASA Astrophysics Data System (ADS)

Kurki-Suonio, Kaarle

2011-03-01

This article sketches a framework of ideas developed in the context of decades of physics teacher-education that was entitled the "perceptional approach". Individual learning and the scientific enterprise are interpreted as different manifestations of the same process aimed at understanding the natural and social worlds. The process is understood to possess the basic nature of perception, where empirical meanings are first born and then conceptualised. The accumulation of perceived gestalts in the "structure of the mind" leads to structural perception and the generation of conceptual hierarchies, which form a general principle for the expansion of our understanding. The process undergoes hierarchical development from early sensory perception to individual learning and finally to science. The process is discussed in terms of a three-process dynamic. Scientific and technological processes are driven by the interaction of the mind and nature. They are embedded in the social process due to the interaction of individual minds. These sub-processes are defined by their aims: The scientific process affects the mind and aims at understanding; the technological process affects nature and aims at human well-being; and the social process aims at mutual agreement and cooperation. In hierarchical development the interaction of nature and the mind gets structured into a "methodical cycle" by procedures involving conscious activities. Its intuitive nature is preserved due to subordination of the procedures to empirical meanings. In physics, two dimensions of hierarchical development are distinguished: Unification development gives rise to a generalisation hierarchy of concepts; Quantification development transfers the empirical meanings to quantities, laws and theories representing successive hierarchical levels of quantitative concepts. Consequences for physics teaching are discussed in principle, and in the light of examples and experiences from physics teacher education.

Early process development of API applied to poorly water-soluble TBID.

PubMed

Meise, Marius; Niggemann, Matthias; Dunens, Alexandra; Schoenitz, Martin; Kuschnerow, Jan C; Kunick, Conrad; Scholl, Stephan

2018-05-01

Finding and optimising of synthesis processes for active pharmaceutical ingredients (API) is time consuming. In the finding phase, established methods for synthesis, purification and formulation are used to achieve a high purity API for biological studies. For promising API candidates, this is followed by pre-clinical and clinical studies requiring sufficient quantities of the active component. Ideally, these should be produced with a process representative for a later production process and suitable for scaling to production capacity. This work presents an overview of different approaches for process synthesis based on an existing lab protocol. This is demonstrated for the production of the model drug 4,5,6,7-tetrabromo-2-(1H-imidazol-2-yl) isoindolin-1,3-dione (TBID). Early batch synthesis and purification procedures typically suffer from low and fluctuating yields and purities due to poor process control. In a first step the literature synthesis and purification procedure was modified and optimized using solubility measurements, targeting easier and safer processing for consecutive studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Social incentives improve deliberative but not procedural learning in older adults.

PubMed

Gorlick, Marissa A; Maddox, W Todd

2015-01-01

Age-related deficits are seen across tasks where learning depends on asocial feedback processing, however plasticity has been observed in some of the same tasks in social contexts suggesting a novel way to attenuate deficits. Socioemotional selectivity theory suggests this plasticity is due to a deliberative motivational shift toward achieving well-being with age (positivity effect) that reverses when executive processes are limited (negativity effect). The present study examined the interaction of feedback valence (positive, negative) and social salience (emotional face feedback - happy; angry, asocial point feedback - gain; loss) on learning in a deliberative task that challenges executive processes and a procedural task that does not. We predict that angry face feedback will improve learning in a deliberative task when executive function is challenged. We tested two competing hypotheses regarding the interactive effects of deliberative emotional biases on automatic feedback processing: (1) If deliberative emotion regulation and automatic feedback are interactive we expect happy face feedback to improve learning and angry face feedback to impair learning in older adults because cognitive control is available. (2) If deliberative emotion regulation and automatic feedback are not interactive we predict that emotional face feedback will not improve procedural learning regardless of valence. Results demonstrate that older adults show persistent deficits relative to younger adults during procedural category learning suggesting that deliberative emotional biases do not interact with automatic feedback processing. Interestingly, a subgroup of older adults identified as potentially using deliberative strategies tended to learn as well as younger adults with angry relative to happy feedback, matching the pattern observed in the deliberative task. Results suggest that deliberative emotional biases can improve deliberative learning, but have no effect on procedural learning.

Disciplinary and Academic Decisions Pertaining to Students: A Review of the 1997 Judicial Decisions.

ERIC Educational Resources Information Center

Stoner, Edward N.; Schupansky, Susan P.

1998-01-01

Reviews key cases concerning disciplinary and academic decisions in higher education handed down by courts in 1997. Cases touched on procedural due process (for medical residents, academic versus disciplinary decisions, other notable issues), double jeopardy, breach of contract, student discipline records under the Family Education Rights and…

Computerized Testing of Level III Associate Degree Nursing Students versus Paper and Pencil Testing Methods

ERIC Educational Resources Information Center

Gullo, Shirna R.

2014-01-01

Computerized testing may be one solution to enhance performance on the curricular Health Education Systems Inc. (HESI) exam and the National Council Licensure Exam for Registered Nurses (NCLEX-RN). Due to the integration of improved technological processes and procedures in healthcare for computerized documentation and electronicmedical records,…

From the Oracles of the Temple of Janus: "Chicago Teachers Union v. Hudson."

ERIC Educational Resources Information Center

Vieira, Edwin, Jr.

1986-01-01

Examines "Chicago Teachers Union v. Hudson," a United States Supreme Court decision guaranteeing non-union government workers specific protections of procedural due process that certain educational and teacher unions had failed to recognize. Decries the "Hudson" decision for separating labor law from laws governing the rest of…

The Due-Able Process Could Happen to You! Physical Educators, Handicapped Students, and the Law.

ERIC Educational Resources Information Center

Kennedy, Susan O.; And Others

1989-01-01

This article presents basic information for regular and special physical educators to help them better understand the procedural rights of parents as well as the schools, and to help them make appropriate judgments for the physical education placement and programing of students with handicaps. (IAH)

Special Education Policy: A Retrospective and Future Prospective--A View from Saskatchewan.

ERIC Educational Resources Information Center

Dahl, Harry; Sanche, Robert

This paper reviews the history of special education in Saskatchewan (Canada) since the 1960s and proposes policy initiatives for future changes. Emphasis in the discussion is on trends and Canadian reports that led to Saskatchewan's 1971 passing of legislation mandating an "appropriate" free public education with procedural due process,…

Ongoing Issues in Test Fairness

ERIC Educational Resources Information Center

Camilli, Gregory

2013-01-01

In the attempt to identify or prevent unfair tests, both quantitative analyses and logical evaluation are often used. For the most part, fairness evaluation is a pragmatic attempt at determining whether procedural or substantive due process has been accorded to either a group of test takers or an individual. In both the individual and comparative…

38 CFR 3.103 - Procedural due process and appellate rights.

Code of Federal Regulations, 2010 CFR

2010-07-01

... right of representation. Proceedings before VA are ex parte in nature, and it is the obligation of VA to... the decision, the right to a hearing on any issue involved in the claim, the right of representation... is deceased. However, in the event that VA has received a death certificate, a terminal hospital...

Assessing Professional Openness to a Novel Publication Approach.

ERIC Educational Resources Information Center

DeFiore, Roberta M.; Kramer, Thomas J.

In response to criticism of the peer review publication process, a study surveyed a random sample of 600 members of the American Psychological Association (APA) to determine (1) whether professional openness exists regarding the publication of a journal highlighting studies that, due to a difficulty in the experimental procedure, would usually be…

Hydrological processes and model representation: impact of soft data on calibration

Treesearch

J.G. Arnold; M.A. Youssef; H. Yen; M.J. White; A.Y. Sheshukov; A.M. Sadeghi; D.N. Moriasi; J.L. Steiner; Devendra Amatya; R.W. Skaggs; E.B. Haney; J. Jeong; M. Arabi; P.H. Gowda

2015-01-01

Hydrologic and water quality models are increasingly used to determine the environmental impacts of climate variability and land management. Due to differing model objectives and differences in monitored data, there are currently no universally accepted procedures for model calibration and validation in the literature. In an effort to develop accepted model calibration...

Legal Issues in Educational Order: Principals' Perceptions of School Discipline Policies and Practices.

ERIC Educational Resources Information Center

Wright, Douglas; Moles, Ollie

A preliminary review of early responses to a questionnaire sent to secondary school principals across the United States revealed that most administrators felt more rigorous due process procedures should be followed in discipline cases than those required by federal regulations and school policies. The principals also tended to believe that…

The Courts and Student Rights -- Procedural Matters.

ERIC Educational Resources Information Center

Phay, Robert E.

This paper traces the evolution of student rights and the judicial protection of these rights through numerous court cases. The author outlines the minimum standards of due process required in disciplinary proceedings and discusses cases that point up (1) the required specificity of rules on student conduct, (2) the requirements of notice to…

Higher Education Law: Current Developments and Issues.

ERIC Educational Resources Information Center

Young, D. Parker

During the past dozen years administrators in higher education have been faced with student action that took the form of protest and that many times became violent. Student action is somewhat quieter now and the battleground has shifted largely from the campus to the courtroom. Both procedural and substantive due process are recognized by the…

Washington State Juvenile Justice Code: An Experiment in Justice.

ERIC Educational Resources Information Center

Illinois Univ., Champaign. Community Research Center.

In the Washington State juvenile justice system, serious or repeat offenders receive the full panoply of due process rights and procedures, with the exception of jury trials; minor offenders are diverted to community boards that require community service or victim restitution; and status offenders are removed from the courts' jurisdiction and…

New York Bight Study: Report 5, NY Bight Biological Review Program

DTIC Science & Technology

1994-05-01

final cap has been recolonized due to changes in granulome - tVy and stress from chronic burial. The procedure and information available for examining this...34 Linear oceanographic features: A focus for research on recruitment processes," Australian Journal of Ecology 15, 391-401. Kiorboe, T., Munk, P., Richardson

A Nationwide Survey of Judicial Systems in Large Institutions of Higher Education

ERIC Educational Resources Information Center

Ostroth, D. David; And Others

1978-01-01

Recent developments in student judicial (disciplinary) systems were surveyed at large institutions of higher education. The past five years have seen more standardization of procedural due process and some growth in judicial structures. The dean of students office, instead of student judicial committee(s), still conducts the majority of…

A numerical procedure for recovering true scattering coefficients from measurements with wide-beam antennas

NASA Technical Reports Server (NTRS)

Wang, Qinglin; Gogineni, S. P.

1991-01-01

A numerical procedure for estimating the true scattering coefficient, sigma(sup 0), from measurements made using wide-beam antennas. The use of wide-beam antennas results in an inaccurate estimate of sigma(sup 0) if the narrow-beam approximation is used in the retrieval process for sigma(sup 0). To reduce this error, a correction procedure was proposed that estimates the error resulting from the narrow-beam approximation and uses the error to obtain a more accurate estimate of sigma(sup 0). An exponential model was assumed to take into account the variation of sigma(sup 0) with incidence angles, and the model parameters are estimated from measured data. Based on the model and knowledge of the antenna pattern, the procedure calculates the error due to the narrow-beam approximation. The procedure is shown to provide a significant improvement in estimation of sigma(sup 0) obtained with wide-beam antennas. The proposed procedure is also shown insensitive to the assumed sigma(sup 0) model.

Space-Wise approach for airborne gravity data modelling

NASA Astrophysics Data System (ADS)

Sampietro, D.; Capponi, M.; Mansi, A. H.; Gatti, A.; Marchetti, P.; Sansò, F.

2017-05-01

Regional gravity field modelling by means of remove-compute-restore procedure is nowadays widely applied in different contexts: it is the most used technique for regional gravimetric geoid determination, and it is also used in exploration geophysics to predict grids of gravity anomalies (Bouguer, free-air, isostatic, etc.), which are useful to understand and map geological structures in a specific region. Considering this last application, due to the required accuracy and resolution, airborne gravity observations are usually adopted. However, due to the relatively high acquisition velocity, presence of atmospheric turbulence, aircraft vibration, instrumental drift, etc., airborne data are usually contaminated by a very high observation error. For this reason, a proper procedure to filter the raw observations in both the low and high frequencies should be applied to recover valuable information. In this work, a software to filter and grid raw airborne observations is presented: the proposed solution consists in a combination of an along-track Wiener filter and a classical Least Squares Collocation technique. Basically, the proposed procedure is an adaptation to airborne gravimetry of the Space-Wise approach, developed by Politecnico di Milano to process data coming from the ESA satellite mission GOCE. Among the main differences with respect to the satellite application of this approach, there is the fact that, while in processing GOCE data the stochastic characteristics of the observation error can be considered a-priori well known, in airborne gravimetry, due to the complex environment in which the observations are acquired, these characteristics are unknown and should be retrieved from the dataset itself. The presented solution is suited for airborne data analysis in order to be able to quickly filter and grid gravity observations in an easy way. Some innovative theoretical aspects focusing in particular on the theoretical covariance modelling are presented too. In the end, the goodness of the procedure is evaluated by means of a test on real data retrieving the gravitational signal with a predicted accuracy of about 0.4 mGal.

Canning process that diminishes paralytic shellfish poison in naturally contaminated mussels (Mytilus galloprovincialis).

PubMed

Vieites, J M; Botana, L M; Vieytes, M R; Leira, F J

1999-05-01

Changes in toxin profile and total toxicity levels of paralytic shellfish poison (PSP)-containing mussels were monitored during the standard canning process of pickled mussels and mussels in brine using mouse bioassays and high-performance liquid chromatography. Detoxification percentages for canned mussel meat exceeded 50% of initial toxicity. Total toxicity reduction did not fully correspond to toxin destruction, which was due to the loss of PSP to cooking water and packing media of the canned product. Significant differences in detoxification percentages were due to changes in toxin profile during heat treatment in packing media. Toxin conversion phenomena should be determined to validate detoxification procedures in the canning industry.

Fiber pushout test: A three-dimensional finite element computational simulation

NASA Technical Reports Server (NTRS)

Mital, Subodh K.; Chamis, Christos C.

1990-01-01

A fiber pushthrough process was computationally simulated using three-dimensional finite element method. The interface material is replaced by an anisotropic material with greatly reduced shear modulus in order to simulate the fiber pushthrough process using a linear analysis. Such a procedure is easily implemented and is computationally very effective. It can be used to predict fiber pushthrough load for a composite system at any temperature. The average interface shear strength obtained from pushthrough load can easily be separated into its two components: one that comes from frictional stresses and the other that comes from chemical adhesion between fiber and the matrix and mechanical interlocking that develops due to shrinkage of the composite because of phase change during the processing. Step-by-step procedures are described to perform the computational simulation, to establish bounds on interfacial bond strength and to interpret interfacial bond quality.

Impairment of recollection but not familiarity in a case of developmental amnesia.

PubMed

Brandt, Karen R; Gardiner, John M; Vargha-Khadem, Faraneh; Baddeley, Alan D; Mishkin, Mortimer

2008-01-01

In a re-examination of the recognition memory of Jon, a young adult with developmental amnesia due to perinatal hippocampal damage, we used a test procedure that provides estimates of the separate contributions to recognition of recollection and familiarity. Comparison between Jon and his controls revealed that, whereas he was unimpaired in the familiarity process, he showed abnormally low levels of recollection, supporting the view that the hippocampus mediates the latter process selectively.

Error Analysis Of Students Working About Word Problem Of Linear Program With NEA Procedure

NASA Astrophysics Data System (ADS)

Santoso, D. A.; Farid, A.; Ulum, B.

2017-06-01

Evaluation and assessment is an important part of learning. In evaluation process of learning, written test is still commonly used. However, the tests usually do not following-up by further evaluation. The process only up to grading stage not to evaluate the process and errors which done by students. Whereas if the student has a pattern error and process error, actions taken can be more focused on the fault and why is that happen. NEA procedure provides a way for educators to evaluate student progress more comprehensively. In this study, students’ mistakes in working on some word problem about linear programming have been analyzed. As a result, mistakes are often made students exist in the modeling phase (transformation) and process skills (process skill) with the overall percentage distribution respectively 20% and 15%. According to the observations, these errors occur most commonly due to lack of precision of students in modeling and in hastiness calculation. Error analysis with students on this matter, it is expected educators can determine or use the right way to solve it in the next lesson.

Efficiency, cost-effectiveness and need of inversion in nutritional therapy. Importance of detecting and documenting undernutrition.

PubMed

Morán López, Jesús Manuel; Piedra León, María; Beneítez Moralejo, Belén; Enciso Izquierdo, Fidel Jesús; Luengo Pérez, Luis Miguel; Amado Señaris, José Antonio

2016-06-01

Disease Related Malnutrition (DRM) is highly prevalent in Spanish hospitals. WHO estimates that 20-40% of health-associated expenses are lost due to inefficiency. Demonstration that DRM is a component of inefficiency and hiring a specialist physician for its detection and treatment is cost-effective. Comparison between nutritional diagnosis and procedures detected and encoded at discharge using McNemar test. Recoding of 162 discharge reports including nutritional diagnoses and procedures. Determine changes on Case-Mix Index (IC), cost of procedure and cost procedure/DRG index. Comparison using T-student paired test. Only 10 of 162 diagnoses of malnutrition were coded in delivery statements (p < 0.001). After right codification, IC increased in 103,3 DRG points (p < 0.001). Consequently, procedure cost/DRG index was reduced in 978.81 € (p < 0.001). DRM is underdiagnosed in our hospital. DRM and nutritional procedures detection by a doctor specialist in clinical nutrition led to a reduction in cost procedure/DRG index of 16.8% of officially established by the Health System. Loss of 16.8% of health expenses, estimated in 424.785,15 € was described. Proper codification would have justified 343.291,2 € reimbursement just for nutritional diagnoses and processes. Both expenses were lost due to system's inefficiency. Those amounts are much higher than cost associated of hiring a specialist in clinical nutrition. Copyright © 2016 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

[Efficiency, cost-effectiveness and justification of need for investment in nutrition therapy in a hospital of third level; the role of specialists in endocrinology and nutrition and the coding unit].

PubMed

Morán López, Jesús Manuel; Enciso Izquierdo, Fidel Jesús; Beneítez Moralejo, Belén; Luengo Pérez, Luis Miguel; Piedra León, María; Amado Señaris, José Antonio

2015-04-01

Disease Related Malnutrition (DRM) is highly prevalent in Spanish hospitals. WHO estimates that 20-40% of health-associated expenses are lost due to inefficiency. Demonstration that DRM is a component of inefficiency and hiring a specialist physician for its detection and treatment is cost-effective. Comparison between nutritional diagnosis and procedures detected and encoded at discharge using McNemar test. Recoding of 55 discharge reports including nutritional diagnoses and procedures. Determine changes on Case-Mix Index (IC), cost of procedure and cost procedure/GRD index. Comparison using Wilcoxon test. Only 2 of 55 diagnoses of malnutrition were coded in delivery statements (p<0,001). After right codification,IC increased in 42,67 GRD points (p<0,05). Consequently, procedure cost/GRD index was reduced in 976,81€ (p<0,05). DRM is underdiagnosed in our hospital. DRM and nutritional procedures detection by a specialist on endocrinology and nutrition led to a reduction in cost procedure/GRD index of 20% of officially established by the Health System. Loss of 20% of health expenses,estimated in 172690€ was described. Proper codification would have justified 154581€ reimbursement just for nutritional diagnoses and processes. Both expenses were lost due to system's inefficiency. Those amounts are much higher than cost associated of hiring a specialist, so there is no economic reason for denying it. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Procedural Challenges In International Collaborative Research

PubMed Central

Loo, Kek Khee

2009-01-01

There is tremendous promise for a rewarding experience in an international research project due to the collaboration, mutual learning and cultural bridging that intrinsically occur. However, knowledge of the procedural requirements for international research is not widely disseminated to investigators who may not have been involved in the administration of a federal grant with a foreign component. The purpose of this article is to highlight the major challenges in administrative, procedural and equipment management aspects of grant implementation when federal funding is involved in international collaborative research. It is hoped that awareness of these difficulties and demystification of the process for future investigators can minimize the potential encumbrances in a rewarding journey towards realizing the scientific goals in an international collaborative research project. PMID:19574522

Software design as a problem in learning theory (a research overview)

NASA Technical Reports Server (NTRS)

Fass, Leona F.

1992-01-01

Our interest in automating software design has come out of our research in automated reasoning, inductive inference, learnability, and algebraic machine theory. We have investigated these areas extensively, in connection with specific problems of language representation, acquisition, processing, and design. In the case of formal context-free (CF) languages we established existence of finite learnable models ('behavioral realizations') and procedures for constructing them effectively. We also determined techniques for automatic construction of the models, inductively inferring them from finite examples of how they should 'behave'. These results were obtainable due to appropriate representation of domain knowledge, and constraints on the domain that the representation defined. It was when we sought to generalize our results, and adapt or apply them, that we began investigating the possibility of determining similar procedures for constructing correct software. Discussions with other researchers led us to examine testing and verification processes, as they are related to inference, and due to their considerable importance in correct software design. Motivating papers by other researchers, led us to examine these processes in some depth. Here we present our approach to those software design issues raised by other researchers, within our own theoretical context. We describe our results, relative to those of the other researchers, and conclude that they do not compare unfavorably.

Ward nurses' knowledge of computed tomography scanning.

PubMed

Majeed, M A; Nayeemuddin, M; Christie, M

Patients benefit from and are reassured by advance information on procedures that they are to undergo. Ward nurses should have adequate knowledge of radiological investigations to ensure proper patient preparation and good interdepartmental communication to avoid delays and cancellations. This study was conducted to assess the ward nurses' knowledge of the process of computed tomography (CT) scanning. One hundred and twenty qualified nurses were asked to complete a questionnaire regarding CT scanning. The findings revealed a suboptimal level of awareness about the process. This is probably due to lack of formal teaching for nurses on the wards in regards the different radiological procedures and patient preparation. There is a strong case for better educational talks on rapidly changing radiological techniques for ward staff to ensure high-quality patient care.

A Z-number-based decision making procedure with ranking fuzzy numbers method

NASA Astrophysics Data System (ADS)

Mohamad, Daud; Shaharani, Saidatull Akma; Kamis, Nor Hanimah

2014-12-01

The theory of fuzzy set has been in the limelight of various applications in decision making problems due to its usefulness in portraying human perception and subjectivity. Generally, the evaluation in the decision making process is represented in the form of linguistic terms and the calculation is performed using fuzzy numbers. In 2011, Zadeh has extended this concept by presenting the idea of Z-number, a 2-tuple fuzzy numbers that describes the restriction and the reliability of the evaluation. The element of reliability in the evaluation is essential as it will affect the final result. Since this concept can still be considered as new, available methods that incorporate reliability for solving decision making problems is still scarce. In this paper, a decision making procedure based on Z-numbers is proposed. Due to the limitation of its basic properties, Z-numbers will be first transformed to fuzzy numbers for simpler calculations. A method of ranking fuzzy number is later used to prioritize the alternatives. A risk analysis problem is presented to illustrate the effectiveness of this proposed procedure.

Engineering applications of strong ground motion simulation

NASA Astrophysics Data System (ADS)

Somerville, Paul

1993-02-01

The formulation, validation and application of a procedure for simulating strong ground motions for use in engineering practice are described. The procedure uses empirical source functions (derived from near-source strong motion recordings of small earthquakes) to provide a realistic representation of effects such as source radiation that are difficult to model at high frequencies due to their partly stochastic behavior. Wave propagation effects are modeled using simplified Green's functions that are designed to transfer empirical source functions from their recording sites to those required for use in simulations at a specific site. The procedure has been validated against strong motion recordings of both crustal and subduction earthquakes. For the validation process we choose earthquakes whose source models (including a spatially heterogeneous distribution of the slip of the fault) are independently known and which have abundant strong motion recordings. A quantitative measurement of the fit between the simulated and recorded motion in this validation process is used to estimate the modeling and random uncertainty associated with the simulation procedure. This modeling and random uncertainty is one part of the overall uncertainty in estimates of ground motions of future earthquakes at a specific site derived using the simulation procedure. The other contribution to uncertainty is that due to uncertainty in the source parameters of future earthquakes that affect the site, which is estimated from a suite of simulations generated by varying the source parameters over their ranges of uncertainty. In this paper, we describe the validation of the simulation procedure for crustal earthquakes against strong motion recordings of the 1989 Loma Prieta, California, earthquake, and for subduction earthquakes against the 1985 Michoacán, Mexico, and Valparaiso, Chile, earthquakes. We then show examples of the application of the simulation procedure to the estimatation of the design response spectra for crustal earthquakes at a power plant site in California and for subduction earthquakes in the Seattle-Portland region. We also demonstrate the use of simulation methods for modeling the attenuation of strong ground motion, and show evidence of the effect of critical reflections from the lower crust in causing the observed flattening of the attenuation of strong ground motion from the 1988 Saguenay, Quebec, and 1989 Loma Prieta earthquakes.

FIRE's Guide to Due Process and Fair Procedure on Campus. FIRE's Guides to Student Rights on Campus

ERIC Educational Resources Information Center

Silverglate, Harvey A.; Gewolb, Josh

2003-01-01

Students should know their rights and liberties, and they need to be better informed and better equipped about how to assert and defend these precious things. The protectors of students' rights and liberties--those faculty, administrators, parents, alumni, friends, citizens, advisors, and attorneys who care about such vital matters--should…

Due Process in Student Discipline in Non-Public Schools.

ERIC Educational Resources Information Center

Furst, Lyndon G.

A study to determine the status of disciplinary procedures in nonpublic high schools in Nebraska and Kansas is described in this report. A two-part questionnaire to assess schools' written policies and actual practices was administered to 68 out of 72 private schools, a 94 percent response rate. Findings indicate that the majority of nonpublic…

Pathology in Continuous Infusion Studies in Rodents and Non-Rodents and ITO (Infusion Technology Organisation)-Recommended Protocol for Tissue Sampling and Terminology for Procedure-Related Lesions

PubMed Central

Weber, Klaus; Mowat, Vasanthi; Hartmann, Elke; Razinger, Tanja; Chevalier, Hans-Jörg; Blumbach, Kai; Green, Owen P.; Kaiser, Stefan; Corney, Stephen; Jackson, Ailsa; Casadesus, Agustin

2011-01-01

Many variables may affect the outcome of continuous infusion studies. The results largely depend on the experience of the laboratory performing these studies, the technical equipment used, the choice of blood vessels and hence the surgical technique as well the quality of pathological evaluation. The latter is of major interest due to the fact that the pathologist is not involved until necropsy in most cases, i.e. not dealing with the complicated surgical or in-life procedures of this study type. The technique of tissue sampling during necropsy and the histology processing procedures may influence the tissues presented for evaluation, hence the pathologist may be a source of misinterpretation. Therefore, ITO proposes a tissue sampling procedure and a standard nomenclature for pathological lesions for all sites and tissues in contact with the port-access and/or catheter system. PMID:22272050

Micro-evolution due to pollution: possible consequences for ecosystem responses to toxic stress.

PubMed

Medina, Matías H; Correa, Juan A; Barata, Carlos

2007-05-01

Polluting events can change community structure and ecosystem functioning. Selection of genetically inherited tolerance on exposed populations, here referred as micro-evolution due to pollution, has been recognized as one of the causes of these changes. However, there is a gap between studies addressing this process and those assessing effects at higher levels of biological organization. In this review we attempt to address these evolutionary considerations into the ecological risk assessment (ERA) of polluting events and to trigger the discussion about the consequences of this process for the ecosystem response to toxic stress. We provide clear evidence that pollution drives micro-evolutionary processes in several species. When this process occurs, populations inhabiting environments that become polluted may persist. However, due to the existence of ecological costs derived from the loss of genetic variability, negative pleiotropy with fitness traits and/or from physiological alterations, micro-evolution due to pollution may alter different properties of the affected populations. Despite the existence of empirical evidence showing that safety margins currently applied in the ERA process may account for pollution-induced genetic changes in tolerance, information regarding long-term ecological consequences at higher levels of biological organization due to ecological costs is not explicitly considered in these procedures. In relation to this, we present four testable hypotheses considering that micro-evolution due to pollution acts upon the variability of functional response traits of the exposed populations and generates changes on their functional effect traits, therefore, modifying the way species exploit their ecological niches and participate in the overall ecosystem functioning.

Processing of intended and unintended strategic issues and integration into the strategic agenda.

PubMed

Ridder, Hans-Gerd; Schrader, Jan Simon

2017-11-01

Strategic change is needed in hospitals due to external and internal pressures. However, research on strategic change, as a combination of management and medical expertise in hospitals, remains scarce. We analyze how intended strategic issues are processed into deliberate strategies and how unintended strategic issues are processed into emergent strategies in the management of strategy formation in hospitals. This study empirically investigates the integration of medical and management expertise in strategy formation. The longitudinal character of the case study enabled us to track patterns of intended and unintended strategic issues over 2 years. We triangulated data from interviews, observations, and documents. In accordance with the quality standards of qualitative research procedures, we analyzed the data by pattern matching and provided analytical generalization regarding strategy formation in hospitals. Our findings suggest that strategic issues are particularly successful within the strategy formation process if interest groups are concerned with the strategic issue, prospective profits are estimated, and relevant decisions makers are involved early on. Structure and interaction processes require clear criteria and transparent procedures for effective strategy formation. There is systematic neglect of medical expertise in processes of generating strategies. Our study reveals that the decentralized structure of medical centers is an adequate template for both the operationalization of intended strategic issues and the development of unintended strategic issues. However, tasks, roles, responsibility, resources, and administrative support are necessary for effective management of strategy formation. Similarly, criteria, procedures, and decision-making are prerequisites for effective strategy formation.

Wave and Beach Processes Modeling for Sabine Pass to Galveston Bay, Texas, Shoreline Erosion Feasibility Study

DTIC Science & Technology

2007-08-01

local wind field , led to the development of an appropriate alternative procedure which produced GENESIS results in agreement with observations...River field site wave data. ........................................................................................................53 Table 17...been abandoned since 1989 due to shoreline erosion. From east to west, the inlets in the study area include Sabine Pass, Rollover Pass near the

The Logistical Tracking System (LTS) Five Years Later: What Has Been Accomplished?

ERIC Educational Resources Information Center

Valcik, Nicolas A.

2007-01-01

The purpose of this research is to discuss development of the Logistical Tracking System (LTS)1 and evaluate the changes in processes and procedures at the University of Texas-Dallas (UT-Dallas) that were due to implementation of a new type of technology. The chapter elaborates on the positive and negative aspects of designing and constructing a…

Consumer protection and managed care: the need for organized consumers.

PubMed

Rodwin, M A

1996-01-01

Despite its many advantages, managed care creates new problems for consumers. Activists have proposed four types of remedies: (1) increased information and choice; (2) standards for services and marketing; (3) administrative oversight; and (4) procedural due process for complaints. Each approach offers some benefits, but they are insufficient to cope with consumer problems. What is lacking is effective, organized consumer advocacy.

Analysis of machining damage in engineering ceramics by fracture mechanics, fractography and x-ray diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollstein, T.; Pfeiffer, W.; Rombach, M.

1996-12-31

The cost for final machining covers a significant percentage of the whole cost of a ceramic component. This is due to the difficult machining of the high performance ceramics. The high values of hardness and wear resistance, which are desired in many applications, hinder the process of machining. Only a few machining procedures are applicable to engineering ceramics e.g. grinding, polishing or ultrasonic lapping, and the rate of material removal is considerably lower than for metals. In addition crack generation in the surface regions during machining is easily possible due to the brittleness of the ceramics. The material removal duringmore » grinding, which is the most important machining procedure of engineering ceramics, takes place mainly by brittle fracture processes but also by ductile material removal. The complex stress conditions in the work piece below or in the vicinity of the grinding grits lead to a variability of cracks and crack systems like median cracks, lateral cracks or radial cracks, which extend in general {le} 50 {mu}m and which lead to the strength anisotropy of ground ceramics, if certain grinding parameters are used e.g..« less

Complex functional and epithetic rehabilitation after ablation of recurrent retroauricular basal cell carcinoma – a case study

PubMed Central

Reich, Waldemar; Exner, Anika; Winter, Eileen; Al-Nawas, Bilal; Eckert, Alexander Walter

2017-01-01

The reconstruction of extended defects of the concha poses a complex challenge for plastic surgeons. In cases of subtotal ablation, an alternative method designed especially for elderly oncological patients consists of epithetic rehabilitation. However, inserting an implant-retained concha epithesis proves challenging in patients with antecedents of deep resections involving the mastoid process. In the present case study, we report on the long-term treatment course (2009–2017) of a 79-year-old male patient suffering from a recurrent basal cell carcinoma of the retroauricular region. Following tumor resection, along with lateral mastoidectomy, reconstruction, and adjuvant radiotherapy, functional and esthetic deficits primarily due to peripheral facial nerve palsy were successfully managed using a multistep procedure. The procedure was completed by inserting an implant-retained concha epithesis, resulting in improved quality of life. Due to prior lateral mastoidectomy, ultra-short implants (4 mm) were inserted, partially at atypical positions. For maintaining healthy periimplant soft tissue, aftercare comprised cold plasma treatment. This oncologic case demonstrates the therapeutic necessity of using a broad spectrum of reconstructive procedures, along with their limitations, in a critical anatomic region. Specific features include the presentation of a workflow using ultra-short implants in a compromised mastoid region. Surgeons should consider alternative implant positions in the event of any compromised mastoid process. A particular emphasis has been put on meticulous aftercare to preserve healthy periimplant soft tissues. PMID:29423354

Age-related differences in perceptuomotor procedural learning in children.

PubMed

Lejeune, Caroline; Catale, Corinne; Schmitz, Xavier; Quertemont, Etienne; Meulemans, Thierry

2013-10-01

Procedural learning is generally considered to proceed in a series of phases, with cognitive resources playing an important role during the initial step. From a developmental perspective, little is known about the development of procedural learning or the role played by explicit cognitive processes during learning. The main objectives of this study were (a) to determine whether procedural learning performance improves with age by comparing groups of 7-year-old children, 10-year-old children, and adults and (b) to investigate the role played by executive functions during the acquisition in these three age groups. The 76 participants were assessed on a computerized adaptation of the mirror tracing paradigm. Results revealed that the youngest children had more difficulty in adapting to the task (they were slower and committed more errors at the beginning of the learning process) than 10-year-olds, but despite this age effect observed at the outset, all children improved performance across trials and transferred their skill to a different figure as well as adults. Correlational analyses showed that inhibition abilities play a key role in the performance of 10-year-olds and adults at the beginning of the learning but not in that of 7-year-olds. Overall, our results suggest that the age-related differences observed in our procedural learning task are at least partly due to the differential involvement of inhibition abilities, which may facilitate learning (so long as they are sufficiently developed) during the initial steps of the learning process; however, they would not be a necessary condition for skill learning to occur. Copyright © 2013 Elsevier Inc. All rights reserved.

Specific arithmetic calculation deficits in children with Turner syndrome.

PubMed

Rovet, J; Szekely, C; Hockenberry, M N

1994-12-01

Study 1 compared arithmetic processing skills on the WRAT-R in 45 girls with Turner syndrome (TS) and 92 age-matched female controls. Results revealed significant underachievement by subjects with TS, which reflected their poorer performance on problems requiring the retrieval of addition and multiplication facts and procedural knowledge for addition and division operations. TS subjects did not differ qualitatively from controls in type of procedural error committed. Study 2, which compared the performance of 10 subjects with TS and 31 controls on the Keymath Diagnostic Arithmetic Test, showed that the TS group had less adequate knowledge of arithmetic, subtraction, and multiplication procedures but did not differ from controls on Fact items. Error analyses revealed that TS subjects were more likely to confuse component steps or fail to separate intermediate steps or to complete problems. TS subjects relied to a greater degree on verbal than visual-spatial abilities in arithmetic processing while their visual-spatial abilities were associated with retrieval of simple multidigit addition facts and knowledge of subtraction, multiplication, and division procedures. Differences between the TS and control groups increased with age for Keymath, but not WRAT-R, procedures. Discrepant findings are related to the different task constraints (timed vs. untimed, single vs. alternate versions, size of item pool) and the use of different strategies (counting vs. fact retrieval). It is concluded that arithmetic difficulties in females with TS are due to less adequate procedural skills, combined with poorer fact retrieval in timed testing situations, rather than to inadequate visual-spatial abilities.

Selecting Statistical Procedures for Quality Control Planning Based on Risk Management.

PubMed

Yago, Martín; Alcover, Silvia

2016-07-01

According to the traditional approach to statistical QC planning, the performance of QC procedures is assessed in terms of its probability of rejecting an analytical run that contains critical size errors (PEDC). Recently, the maximum expected increase in the number of unacceptable patient results reported during the presence of an undetected out-of-control error condition [Max E(NUF)], has been proposed as an alternative QC performance measure because it is more related to the current introduction of risk management concepts for QC planning in the clinical laboratory. We used a statistical model to investigate the relationship between PEDC and Max E(NUF) for simple QC procedures widely used in clinical laboratories and to construct charts relating Max E(NUF) with the capability of the analytical process that allow for QC planning based on the risk of harm to a patient due to the report of erroneous results. A QC procedure shows nearly the same Max E(NUF) value when used for controlling analytical processes with the same capability, and there is a close relationship between PEDC and Max E(NUF) for simple QC procedures; therefore, the value of PEDC can be estimated from the value of Max E(NUF) and vice versa. QC procedures selected by their high PEDC value are also characterized by a low value for Max E(NUF). The PEDC value can be used for estimating the probability of patient harm, allowing for the selection of appropriate QC procedures in QC planning based on risk management. © 2016 American Association for Clinical Chemistry.

A prospective outcomes analysis of palliative procedures performed for malignant intestinal obstruction due to recurrent ovarian cancer.

PubMed

Chi, Dennis S; Phaëton, Rebecca; Miner, Thomas J; Kardos, Steven V; Diaz, John P; Leitao, Mario M; Gardner, Ginger; Huh, Jae; Tew, William P; Konner, Jason A; Sonoda, Yukio; Abu-Rustum, Nadeem R; Barakat, Richard R; Jaques, David P

2009-08-01

To obtain prospective outcomes data on patients (pts) undergoing palliative operative or endoscopic procedures for malignant bowel obstruction due to recurrent ovarian cancer. An institutional study was conducted from July 2002 to July 2003 to prospectively identify pts who underwent an operative or endoscopic procedure to palliate the symptoms of advanced cancer. This report focuses on pts with malignant bowel obstruction due to recurrent ovarian cancer. Procedures performed with an upper or lower gastrointestinal (GI) endoscope were considered "endoscopic." All other cases were classified as "operative." Following the procedure, the presence or absence of symptoms was determined and followed over time. All pts were followed until death. Palliative interventions were performed on 74 gynecologic oncology pts during the study period, of which 26 (35%) were for malignant GI obstruction due to recurrent ovarian cancer. The site of obstruction was small bowel in 14 (54%) cases and large bowel in 12 (46%) cases. Palliative procedures were operative in 14 (54%) pts and endoscopic in the other 12 (46%). Overall, symptomatic improvement or resolution within 30 days was achieved in 23 (88%) of 26 patients, with 1 (4%) postprocedure mortality. At 60 days, 10 (71%) of 14 pts who underwent operative procedures and 6 (50%) of 12 pts who had endoscopic procedures had symptom control. Median survival from the time of the palliative procedure was 191 days (range, 33-902) for those undergoing an operative procedure and 78 days (range, 18-284) for those undergoing an endoscopic procedure. Patients with malignant bowel obstructions due to recurrent ovarian cancer have a high likelihood of experiencing relief of symptoms with palliative procedures. Although recurrence of symptoms is common, durable palliation and extended survival are possible, especially in those patients selected for operative intervention.

Bayesian estimation of Karhunen–Loève expansions; A random subspace approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhary, Kenny; Najm, Habib N.

One of the most widely-used statistical procedures for dimensionality reduction of high dimensional random fields is Principal Component Analysis (PCA), which is based on the Karhunen-Lo eve expansion (KLE) of a stochastic process with finite variance. The KLE is analogous to a Fourier series expansion for a random process, where the goal is to find an orthogonal transformation for the data such that the projection of the data onto this orthogonal subspace is optimal in the L 2 sense, i.e, which minimizes the mean square error. In practice, this orthogonal transformation is determined by performing an SVD (Singular Value Decomposition)more » on the sample covariance matrix or on the data matrix itself. Sampling error is typically ignored when quantifying the principal components, or, equivalently, basis functions of the KLE. Furthermore, it is exacerbated when the sample size is much smaller than the dimension of the random field. In this paper, we introduce a Bayesian KLE procedure, allowing one to obtain a probabilistic model on the principal components, which can account for inaccuracies due to limited sample size. The probabilistic model is built via Bayesian inference, from which the posterior becomes the matrix Bingham density over the space of orthonormal matrices. We use a modified Gibbs sampling procedure to sample on this space and then build a probabilistic Karhunen-Lo eve expansions over random subspaces to obtain a set of low-dimensional surrogates of the stochastic process. We illustrate this probabilistic procedure with a finite dimensional stochastic process inspired by Brownian motion.« less

Bayesian estimation of Karhunen–Loève expansions; A random subspace approach

DOE PAGES

Chowdhary, Kenny; Najm, Habib N.

2016-04-13

One of the most widely-used statistical procedures for dimensionality reduction of high dimensional random fields is Principal Component Analysis (PCA), which is based on the Karhunen-Lo eve expansion (KLE) of a stochastic process with finite variance. The KLE is analogous to a Fourier series expansion for a random process, where the goal is to find an orthogonal transformation for the data such that the projection of the data onto this orthogonal subspace is optimal in the L 2 sense, i.e, which minimizes the mean square error. In practice, this orthogonal transformation is determined by performing an SVD (Singular Value Decomposition)more » on the sample covariance matrix or on the data matrix itself. Sampling error is typically ignored when quantifying the principal components, or, equivalently, basis functions of the KLE. Furthermore, it is exacerbated when the sample size is much smaller than the dimension of the random field. In this paper, we introduce a Bayesian KLE procedure, allowing one to obtain a probabilistic model on the principal components, which can account for inaccuracies due to limited sample size. The probabilistic model is built via Bayesian inference, from which the posterior becomes the matrix Bingham density over the space of orthonormal matrices. We use a modified Gibbs sampling procedure to sample on this space and then build a probabilistic Karhunen-Lo eve expansions over random subspaces to obtain a set of low-dimensional surrogates of the stochastic process. We illustrate this probabilistic procedure with a finite dimensional stochastic process inspired by Brownian motion.« less

[Quality control in anesthesiology].

PubMed

Muñoz-Ramón, J M

1995-03-01

The process of quality control and auditing of anesthesiology allows us to evaluate care given by a service and solve problems that are detected. Quality control is a basic element of care giving and is only secondarily an area of academic research; it is therefore a meaningless effort if the information does not serve to improve departmental procedures. Quality assurance procedures assume certain infrastructural requirements and an initial period of implementation and adjustment. The main objectives of quality control are the reduction of morbidity and mortality due to anesthesia, assurance of the availability and proper management of resources and, finally, the well-being and safety of the patient.

Residual Gases in Crystal Growth Systems

NASA Technical Reports Server (NTRS)

Palosz, W.

2003-01-01

Residual gases present in closed ampoules may affect different crystal growth processes. That seems to be particularly true under microgravity conditions where, due to weightlessness of the melt, the gases may lead to detached solidification and/or formation of voids and bubbles, as observed in the past. For that reason a good understanding and control of formation of residual gases is important for an optimum design and meaningful interpretation of crystal growth experiments. Our extensive experimental and theoretical studies of the subject, summarized in this paper, include degassing of silica glass and generation of gases from different source materials. Different materials processing conditions, like outgassing under vacuum, annealing in hydrogen, resublimation, different material preparation procedures, multiple annealings, different processing times, and others were applied and their effect on the amount and composition of gas were analyzed. The experimental results were interpreted based on theoretical calculations on diffusion in silica glass and source materials and thermochemistry of the system. Procedures for a reduction of the amount of gas are also discussed.

Determination of Optimal Subsidy for Materials Saving Investment through Recycle/Recovery at Industrial Level

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.

2009-08-01

This work deals with a methodological framework under the form of a simple/short algorithmic procedure (including 11 activity steps and 3 decision nodes) designed/developed for the determination of optimal subsidy for materials saving investment through recycle/recovery (RR) at industrial level. Two case examples are presented, covering both aspects, without and with recycling. The expected Relative Cost Decrease (RCD) because of recycling, which forms a critical index for decision making on subsidizing, is estimated. The developed procedure can be extended outside the industrial unit to include collection/transportation/processing of recyclable wasted products. Since, in such a case, transportation cost and processing cost are conflict depended variables (when the quantity collected/processed Q is the independent/explanatory variable), the determination of Qopt is examined under energy crises conditions, when corresponding subsidies might be granted to re-set the original equilibrium and avoid putting the recycling enterprise in jeopardize due to dangerous lowering of the first break-even point.

Comparison of retina damage thresholds simulating the femtosecond-laser in situ keratomileusis (fs-LASIK) process with two laser systems in the CW- and fs-regime

NASA Astrophysics Data System (ADS)

Sander, M.; Minet, O.; Zabarylo, U.; Müller, M.; Tetz, M. R.

2012-04-01

The femtosecond-laser in situ keratomileusis procedure affords the opportunity to correct ametropia by cutting transparent corneal tissue with ultra-short laser pulses. Thereby the tissue cut is generated by a laser-induced optical breakdown in the cornea with ultra-short laser pulses in the near-infrared range. Compared to standard procedures such as photorefractive keratectomy and laser in-situ keratomileusis with the excimer laser, where the risk potential for the eye is low due to the complete absorption of ultraviolet irradiation from corneal tissue, only a certain amount of the pulse energy is deposited in the cornea during the fs-LASIK process. The remaining energy propagates through the eye and interacts with the retina and the strong absorbing tissue layers behind. The objective of the presented study was to determine and compare the retina damage thresholds during the fs-LASIK process simulated with two various laser systems in the CW- and fs-regime.

Measuring myokines with cardiovascular functions: pre-analytical variables affecting the analytical output.

PubMed

Lombardi, Giovanni; Sansoni, Veronica; Banfi, Giuseppe

2017-08-01

In the last few years, a growing number of molecules have been associated to an endocrine function of the skeletal muscle. Circulating myokine levels, in turn, have been associated with several pathophysiological conditions including the cardiovascular ones. However, data from different studies are often not completely comparable or even discordant. This would be due, at least in part, to the whole set of situations related to the preparation of the patient prior to blood sampling, blood sampling procedure, processing and/or store. This entire process constitutes the pre-analytical phase. The importance of the pre-analytical phase is often not considered. However, in routine diagnostics, the 70% of the errors are in this phase. Moreover, errors during the pre-analytical phase are carried over in the analytical phase and affects the final output. In research, for example, when samples are collected over a long time and by different laboratories, a standardized procedure for sample collecting and the correct procedure for sample storage are acknowledged. In this review, we discuss the pre-analytical variables potentially affecting the measurement of myokines with cardiovascular functions.

KSC-97pc670

NASA Image and Video Library

1997-04-17

The Spacelab long transfer tunnel that leads from the Space Shuttle Orbiter Columbia’s crew airlock to the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the spaceplane’s payload bay is removed by KSC paylaod processing employees in Orbiter Processing Facility 1. The tunnel was taken out to allow better access to the MSL-1 module during reservicing operations to prepare it for its reflight as MSL-1R. That mission is now scheduled to lift off July 1. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day reflight, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

KSC-97pc764

NASA Image and Video Library

1997-05-01

KSC payload processing employees in Orbiter Processing Facility 1 prepare the Space Shuttle Orbiter Columbia’s crew airlock and payload bay for the reinstallation of the Spacelab long transfer tunnel that leads from the airlock to the Microgravity Science Laboratory-1 (MSL-1) Spacelab module. The tunnel was taken out after the STS-83 mission to allow better access to the MSL-1 module during reservicing operations to prepare it for for the STS-94 mission. That space flight is now scheduled to lift off in early July. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

The Processing and Analysis of the Data from an Air Force Geophysics Laboratory Atmospheric Optical Measurement Station and the Maintenance of the Central Data Logger System.

DTIC Science & Technology

1984-02-15

Directory ... ....... 42 19. Sample Interval Monitor Graph ................. 46 vi vii LIST OF FIGURES P age I. Example of DATA PROFILE Plot...Final Report, AFGL-TR-81-0130, ADA1? 7879 . PART I. RAW DATA TAPE PROCESSING PROCEDURES. 1.1 EXPERIMENT SAMPLING SEQUENCES Due to the changing...Data Quality 79 QQQQ Packed Eltro Data Quality 80 QQQQQQQQ Packed Luxmeter Data Quality 8i QQOQ Packed Night Path Data Quality P? QQQQQQQ Packed Vis

Patents for Soldiers

DTIC Science & Technology

2016-06-10

required for the U.S. Army to achieve overmatch of its enemies.6 It is one of the eight tenets prescribed for commanders to consider while conducting ...regulations that are current as of January 1, 2016. Sixth, interviews were generally not conducted due to time constraints, procedural requirements, and a...development process, were searching for such a material to develop a catheter. The named inventors conducted extensive research and demonstrations with this

Pen-based computers: Computers without keys

NASA Technical Reports Server (NTRS)

Conklin, Cheryl L.

1994-01-01

The National Space Transportation System (NSTS) is comprised of many diverse and highly complex systems incorporating the latest technologies. Data collection associated with ground processing of the various Space Shuttle system elements is extremely challenging due to the many separate processing locations where data is generated. This presents a significant problem when the timely collection, transfer, collation, and storage of data is required. This paper describes how new technology, referred to as Pen-Based computers, is being used to transform the data collection process at Kennedy Space Center (KSC). Pen-Based computers have streamlined procedures, increased data accuracy, and now provide more complete information than previous methods. The end results is the elimination of Shuttle processing delays associated with data deficiencies.

Parallelization of a hydrological model using the message passing interface

USGS Publications Warehouse

Wu, Yiping; Li, Tiejian; Sun, Liqun; Chen, Ji

2013-01-01

With the increasing knowledge about the natural processes, hydrological models such as the Soil and Water Assessment Tool (SWAT) are becoming larger and more complex with increasing computation time. Additionally, other procedures such as model calibration, which may require thousands of model iterations, can increase running time and thus further reduce rapid modeling and analysis. Using the widely-applied SWAT as an example, this study demonstrates how to parallelize a serial hydrological model in a Windows® environment using a parallel programing technology—Message Passing Interface (MPI). With a case study, we derived the optimal values for the two parameters (the number of processes and the corresponding percentage of work to be distributed to the master process) of the parallel SWAT (P-SWAT) on an ordinary personal computer and a work station. Our study indicates that model execution time can be reduced by 42%–70% (or a speedup of 1.74–3.36) using multiple processes (two to five) with a proper task-distribution scheme (between the master and slave processes). Although the computation time cost becomes lower with an increasing number of processes (from two to five), this enhancement becomes less due to the accompanied increase in demand for message passing procedures between the master and all slave processes. Our case study demonstrates that the P-SWAT with a five-process run may reach the maximum speedup, and the performance can be quite stable (fairly independent of a project size). Overall, the P-SWAT can help reduce the computation time substantially for an individual model run, manual and automatic calibration procedures, and optimization of best management practices. In particular, the parallelization method we used and the scheme for deriving the optimal parameters in this study can be valuable and easily applied to other hydrological or environmental models.

Real-space processing of helical filaments in SPARX

PubMed Central

Behrmann, Elmar; Tao, Guozhi; Stokes, David L.; Egelman, Edward H.; Raunser, Stefan; Penczek, Pawel A.

2012-01-01

We present a major revision of the iterative helical real-space refinement (IHRSR) procedure and its implementation in the SPARX single particle image processing environment. We built on over a decade of experience with IHRSR helical structure determination and we took advantage of the flexible SPARX infrastructure to arrive at an implementation that offers ease of use, flexibility in designing helical structure determination strategy, and high computational efficiency. We introduced the 3D projection matching code which now is able to work with non-cubic volumes, the geometry better suited for long helical filaments, we enhanced procedures for establishing helical symmetry parameters, and we parallelized the code using distributed memory paradigm. Additional feature includes a graphical user interface that facilitates entering and editing of parameters controlling the structure determination strategy of the program. In addition, we present a novel approach to detect and evaluate structural heterogeneity due to conformer mixtures that takes advantage of helical structure redundancy. PMID:22248449

An Automated Peak Identification/Calibration Procedure for High-Dimensional Protein Measures From Mass Spectrometers.

PubMed

Yasui, Yutaka; McLerran, Dale; Adam, Bao-Ling; Winget, Marcy; Thornquist, Mark; Feng, Ziding

2003-01-01

Discovery of "signature" protein profiles that distinguish disease states (eg, malignant, benign, and normal) is a key step towards translating recent advancements in proteomic technologies into clinical utilities. Protein data generated from mass spectrometers are, however, large in size and have complex features due to complexities in both biological specimens and interfering biochemical/physical processes of the measurement procedure. Making sense out of such high-dimensional complex data is challenging and necessitates the use of a systematic data analytic strategy. We propose here a data processing strategy for two major issues in the analysis of such mass-spectrometry-generated proteomic data: (1) separation of protein "signals" from background "noise" in protein intensity measurements and (2) calibration of protein mass/charge measurements across samples. We illustrate the two issues and the utility of the proposed strategy using data from a prostate cancer biomarker discovery project as an example.

Comparison of VFA titration procedures used for monitoring the biogas process.

PubMed

Lützhøft, Hans-Christian Holten; Boe, Kanokwan; Fang, Cheng; Angelidaki, Irini

2014-05-01

Titrimetric determination of volatile fatty acids (VFAs) contents is a common way to monitor a biogas process. However, digested manure from co-digestion biogas plants has a complex matrix with high concentrations of interfering components, resulting in varying results when using different titration procedures. Currently, no standardized procedure is used and it is therefore difficult to compare the performance among plants. The aim of this study was to evaluate four titration procedures (for determination of VFA-levels of digested manure samples) and compare results with gas chromatographic (GC) analysis. Two of the procedures are commonly used in biogas plants and two are discussed in literature. The results showed that the optimal titration results were obtained when 40 mL of four times diluted digested manure was gently stirred (200 rpm). Results from samples with different VFA concentrations (1-11 g/L) showed linear correlation between titration results and GC measurements. However, determination of VFA by titration generally overestimated the VFA contents compared with GC measurements when samples had low VFA concentrations, i.e. around 1 g/L. The accuracy of titration increased when samples had high VFA concentrations, i.e. around 5 g/L. It was further found that the studied ionisable interfering components had lowest effect on titration when the sample had high VFA concentration. In contrast, bicarbonate, phosphate and lactate had significant effect on titration accuracy at low VFA concentration. An extended 5-point titration procedure with pH correction was best to handle interferences from bicarbonate, phosphate and lactate at low VFA concentrations. Contrary, the simplest titration procedure with only two pH end-points showed the highest accuracy among all titration procedures at high VFA concentrations. All in all, if the composition of the digested manure sample is not known, the procedure with only two pH end-points should be the procedure of choice, due to its simplicity and accuracy. Copyright © 2014 Elsevier Ltd. All rights reserved.

Multidisciplinary experiment on studying short-period variability of the sedimentary process in the northeastern part of the Black Sea

NASA Astrophysics Data System (ADS)

Klyuvitkin, A. A.; Ostrovskii, A. G.; Novigatskii, A. N.; Lisitzin, A. P.

2016-07-01

The principal aim of this work is to reveal the regularities of short-period synoptic variability of vertical flows and the composition of settling sedimentary material, to obtain information on the quantitative characteristics of the processes that influence sound-scattering layers in the water layer above the continental slope behind the shelf edge in the northeastern part of the Black Sea. The results were obtained due to improvement of the equipment and the procedures for performing sea experiments on studying physicogeological, biological, and hydrophysical processes in the upper illuminated layer of phytoplankton development.

Modelling airborne gravity data by means of adapted Space-Wise approach

NASA Astrophysics Data System (ADS)

Sampietro, Daniele; Capponi, Martina; Hamdi Mansi, Ahmed; Gatti, Andrea

2017-04-01

Regional gravity field modelling by means of remove - restore procedure is nowadays widely applied to predict grids of gravity anomalies (Bouguer, free-air, isostatic, etc.) in gravimetric geoid determination as well as in exploration geophysics. Considering this last application, due to the required accuracy and resolution, airborne gravity observations are generally adopted. However due to the relatively high acquisition velocity, presence of atmospheric turbulence, aircraft vibration, instrumental drift, etc. airborne data are contaminated by a very high observation error. For this reason, a proper procedure to filter the raw observations both in the low and high frequency should be applied to recover valuable information. In this work, a procedure to predict a grid or a set of filtered along track gravity anomalies, by merging GGM and airborne dataset, is presented. The proposed algorithm, like the Space-Wise approach developed by Politecnico di Milano in the framework of GOCE data analysis, is based on a combination of along track Wiener filter and Least Squares Collocation adjustment and properly considers the different altitudes of the gravity observations. Among the main differences with respect to the satellite application of the Space-Wise approach there is the fact that, while in processing GOCE data the stochastic characteristics of the observation error can be considered a-priori well known, in airborne gravimetry, due to the complex environment in which the observations are acquired, these characteristics are unknown and should be retrieved from the dataset itself. Some innovative theoretical aspects focusing in particular on the theoretical covariance modelling are presented too. In the end, the goodness of the procedure is evaluated by means of a test on real data recovering the gravitational signal with a predicted accuracy of about 0.25 mGal.

Intrastromal corneal reshaping using a high-intensity femtosecond laser: A novel method of vision correction

NASA Astrophysics Data System (ADS)

Han, Taehee

A new technology to perform a minimally invasive cornea reshaping procedure has been developed. This can eliminate the incidence of the flap-related complications of the conventional eye refractive procedures by multiphoton processes using a very high-intensity (I ≥ 1013 W/cm 2), but low energy (Ep ˜ 100-200 microJ) femtosecond laser pulses. Due to much lower energy than that of the nanosecond laser pulses for the thermal photoablation, the multiphoton processes cause almost no collateral damage by heat and shock wave generation. In this method, a series of femtosecond laser pulses is used to create very narrow (< 30 microm) and sufficiently long (≥ 2.5 mm) micro-channels in the cornea. The micro-channels are oriented almost perpendicular to the eye's optical axis. Once the micro-channel reaches a desired length, another series of femtosecond pulses with higher intensity is efficiently delivered through the micro-channel to the endpoint where a certain amount of the stromal tissue is disintegrated by the multiphoton processes. The disintegrated fragments are ejected out of the cornea via the same micro-channel, allowing the corneal surface to collapse, and changing its refractive power. This new corneal reshaping method obviates any process of damaging the corneal surface layer, while retaining the advantages of the conventional refractive procedures such as Laser in situ keratomileusis (LASIK) and Photorefractive keratectomy (PRK). In order to demonstrate the flapless cornea reshaping procedure, we have conducted ex-vivo experiments on fresh porcine eyes. The reshaped corneas were evaluated by using optical coherence tomography (OCT). The test results have shown that this flapless intrastromal procedure can reshape the cornea as intended with almost no surface damage. We have also performed a series of experiments to demonstrate the multiphoton processes in the corneal tissue by very high-intensity femtosecond laser pulses. Through the optical emission spectroscopy, we investigated the spectral lines of calcium atom and ions from the femtosecond laser-induced plasma from the porcine corneal tissue. The experimental results have shown the intensity-dependence of ablation rate, which qualitatively verifies the characteristics of the multiphoton processes.

The limited use of the fluency heuristic: Converging evidence across different procedures.

PubMed

Pohl, Rüdiger F; Erdfelder, Edgar; Michalkiewicz, Martha; Castela, Marta; Hilbig, Benjamin E

2016-10-01

In paired comparisons based on which of two objects has the larger criterion value, decision makers could use the subjectively experienced difference in retrieval fluency of the objects as a cue. According to the fluency heuristic (FH) theory, decision makers use fluency-as indexed by recognition speed-as the only cue for pairs of recognized objects, and infer that the object retrieved more speedily has the larger criterion value (ignoring all other cues and information). Model-based analyses, however, have previously revealed that only a small portion of such inferences are indeed based on fluency alone. In the majority of cases, other information enters the decision process. However, due to the specific experimental procedures, the estimates of FH use are potentially biased: Some procedures may have led to an overestimated and others to an underestimated, or even to actually reduced, FH use. In the present article, we discuss and test the impacts of such procedural variations by reanalyzing 21 data sets. The results show noteworthy consistency across the procedural variations revealing low FH use. We discuss potential explanations and implications of this finding.

Lumley's PODT definition of large eddies and a trio of numerical procedures. [Proper Orthogonal Decomposition Theorem

NASA Technical Reports Server (NTRS)

Payne, Fred R.

1992-01-01

Lumley's 1967 Moscow paper provided, for the first time, a completely rational definition of the physically-useful term 'large eddy', popular for a half-century. The numerical procedures based upon his results are: (1) PODT (Proper Orthogonal Decomposition Theorem), which extracts the Large Eddy structure of stochastic processes from physical or computer simulation two-point covariances, and 2) LEIM (Large-Eddy Interaction Model), a predictive scheme for the dynamical large eddies based upon higher order turbulence modeling. Earlier Lumley's work (1964) forms the basis for the final member of the triad of numerical procedures: this predicts the global neutral modes of turbulence which have surprising agreement with both structural eigenmodes and those obtained from the dynamical equations. The ultimate goal of improved engineering design tools for turbulence may be near at hand, partly due to the power and storage of 'supermicrocomputer' workstations finally becoming adequate for the demanding numerics of these procedures.

Impact of backwashing procedures on deep bed filtration productivity in drinking water treatment.

PubMed

Slavik, Irene; Jehmlich, Alexander; Uhl, Wolfgang

2013-10-15

Backwash procedures for deep bed filters were evaluated and compared by means of a new integrated approach based on productivity. For this, different backwash procedures were experimentally evaluated by using a pilot plant for direct filtration. A standard backwash mode as applied in practice served as a reference and effluent turbidity was used as the criterion for filter run termination. The backwash water volumes needed, duration of the filter-to-waste period, time out of operation, total volume discharged and filter run-time were determined and used to calculate average filtration velocity and average productivity. Results for filter run-times, filter backwash volumes, and filter-to-waste volumes showed considerable differences between the backwash procedures. Thus, backwash procedures with additional clear flushing phases were characterised by an increased need for backwash water. However, this additional water consumption could not be compensated by savings during filter ripening. Compared to the reference backwash procedure, filter run-times were longer for both single-media and dual-media filters when air scour and air/water flush were optimised with respect to flow rates and the proportion of air and water. This means that drinking water production time is longer and less water is needed for filter bed cleaning. Also, backwashing with additional clear flushing phases resulted in longer filter run-times before turbidity breakthrough. However, regarding the productivity of the filtration process, it was shown that it was almost the same for all of the backwash procedures investigated in this study. Due to this unexpected finding, the relationships between filter bed cleaning, filter ripening and filtration performance were considered and important conclusions and new approaches for process optimisation and resource savings were derived. Copyright © 2013 Elsevier Ltd. All rights reserved.

Forensic molecular pathology of violent deaths.

PubMed

Maeda, Hitoshi; Zhu, Bao-li; Ishikawa, Takaki; Michiue, Tomomi

2010-12-15

In forensic pathology, while classical morphology remains a core procedure to investigate deaths, a spectrum of ancillary procedures has been developed and incorporated to detail the pathology. Among them, postmortem biochemistry is important to investigate the systemic pathophysiological changes involved in the dying process that cannot be detected by morphology. In addition, recent advances in molecular biology have provided a procedure to investigate genetic bases of diseases that might present with sudden death, which is called 'molecular autopsy'. Meanwhile, the practical application of RNA analyses to postmortem investigation has not been accepted due to rapid decay after death; however, recent experimental and practical studies using real-time reverse transcription-PCR have suggested that the relative quantification of mRNA transcripts can be applied in molecular pathology for postmortem investigation of deaths, which may be called 'advanced molecular autopsy'. In a broad sense, forensic molecular pathology implies applied medical sciences to investigate the genetic basis of diseases, and the pathophysiology of diseases and traumas leading to death at a biological molecular level in the context of forensic pathology. The possible applications include analyses of local pathology, including tissue injury, ischemia/hypoxia and inflammation at the site of insult or specific tissue damage from intoxication, systemic responses to violence or environmental hazards, disorders due to intoxication, and systemic pathophysiology of fatal process involving major life-support organs. A review of previous studies suggests that systematic postmortem quantitative analysis of mRNA transcripts can be established from multi-faceted aspects of molecular biology and incorporated into death investigations in forensic pathology, to support and reinforce morphological evidence. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Classical and modern control strategies for the deployment, reconfiguration, and station-keeping of the National Aeronautics and Space Administration (NASA) Benchmark Tetrahedron Constellation

NASA Astrophysics Data System (ADS)

Capo-Lugo, Pedro A.

Formation flying consists of multiple spacecraft orbiting in a required configuration about a planet or through Space. The National Aeronautics and Space Administration (NASA) Benchmark Tetrahedron Constellation is one of the proposed constellations to be launched in the year 2009 and provides the motivation for this investigation. The problem that will be researched here consists of three stages. The first stage contains the deployment of the satellites; the second stage is the reconfiguration process to transfer the satellites through different specific sizes of the NASA benchmark problem; and, the third stage is the station-keeping procedure for the tetrahedron constellation. Every stage contains different control schemes and transfer procedures to obtain/maintain the proposed tetrahedron constellation. In the first stage, the deployment procedure will depend on a combination of two techniques in which impulsive maneuvers and a digital controller are used to deploy the satellites and to maintain the tetrahedron constellation at the following apogee point. The second stage that corresponds to the reconfiguration procedure shows a different control scheme in which the intelligent control systems are implemented to perform this procedure. In this research work, intelligent systems will eliminate the use of complex mathematical models and will reduce the computational time to perform different maneuvers. Finally, the station-keeping process, which is the third stage of this research problem, will be implemented with a two-level hierarchical control scheme to maintain the separation distance constraints of the NASA Benchmark Tetrahedron Constellation. For this station-keeping procedure, the system of equations defining the dynamics of a pair of satellites is transformed to take in account the perturbation due to the oblateness of the Earth and the disturbances due to solar pressure. The control procedures used in this research will be transformed from a continuous control system to a digital control system which will simplify the implementation into the computer onboard the satellite. In addition, this research will show an introductory chapter on attitude dynamics that can be used to maintain the orientation of the satellites, and an adaptive intelligent control scheme will be proposed to maintain the desired orientation of the spacecraft. In conclusion, a solution for the dynamics of the NASA Benchmark Tetrahedron Constellation will be presented in this research work. The main contribution of this work is the use of discrete control schemes, impulsive maneuvers, and intelligent control schemes that can be used to reduce the computational time in which these control schemes can be easily implemented in the computer onboard the satellite. These contributions are explained through the deployment, reconfiguration, and station-keeping process of the proposed NASA Benchmark Tetrahedron Constellation.

Simple and economic colloidal centrifugation protocols may be incorporated into the clinical equine sperm processing procedure.

PubMed

Gutiérrez-Cepeda, L; Fernández, A; Crespo, F; Gosálvez, J; Serres, C

2011-03-01

For many years in human assisted-reproduction procedures there have been special protocols to prepare and improve sperm quality. Colloidal centrifugation (CC) is a useful technique that has been proved to enhance semen quality by selection of the best spermatozoa for different species. Its use is recommended to improve fertility of subfertile stallions but current CC protocols are clinically complicated in the equine sperm processing technique due to economic and technical difficulties. The aim of this study was to determine the optimal processing procedures to adapt the use of a CC product (EquiPure™) in the equine reproduction industry. A total of nineteen ejaculates were collected from 10 Purebred Spanish Horses (P.R.E horses) using a Missouri artificial vagina. Gel-free semen aliquots were analyzed prior to treatment (control). Semen was subjected to one of six CC protocols with EquiPure™ and centrifuged samples were statistically evaluated by ANOVA and Duncan tests (p<0.05) for sperm quality and recovery rate. We obtained higher values by colloidal centrifugation in LIN, STR and BCF variables and DNA fragmentation index trended to be lower in most of the CC protocols. The studied protocols were shown to be as efficient in improving equine sperm quality as the current commercial EquiPure™, with the added advantage of being much more economical and simple to use. According to these results it seems to be possible to incorporate single layer and or high colloidal centrifugation volume protocols what would make them simple, economic and clinically viable for the equine sperm processing procedure. Copyright © 2011 Elsevier B.V. All rights reserved.

The Effect of Intra-Dialytic Exercise on Inflammation and Blood Endotoxin Levels.

PubMed

Wong, Jonathan; Davis, Philip; Patidar, Ashish; Zhang, Yonglong; Vilar, Enric; Finkelman, Malcolm; Farrington, Ken

2017-01-01

In healthy individuals, an acute inflammatory response occurs after intense exercise due to gut ischaemia and intestinal bacterial endotoxin translocation into the bloodstream. This process maybe exacerbated in patients who exercise during dialysis due to large volume shifts experienced by many during haemodialysis (HD). The acute effect of intra-dialytic exercise on blood endotoxins and inflammation is not known. The effect of intra-dialytic exercise on blood endotoxin and inflammation was investigated in 10 patients and compared with resting haemodialysis. Blood was measured for endotoxin and inflammatory biomarkers before and after dialysis. With the exception of one sample, all samples tested negative for endotoxin. Intra-dialytic exercise attenuated the rise of interleukin-6, tumour necrosis factor-α and high-sensitivity C-reactive protein after the HD procedure. Intra-dialytic exercise was not associated with an observable rise in blood endotoxin, although it may ameliorate the inflammatory effects of the HD procedure. Larger studies are needed to confirm this finding. © 2017 S. Karger AG, Basel.

Command and Control Options for Joint Logistics

DTIC Science & Technology

2011-03-24

PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 24-03-2011 2. REPORT TYPE Strategy Research Project 3. DATES...point due to excessive government spending.6 The result will most-assuredly be a tightening of pocketbooks , a call for efficiencies and a smaller...procedures and capabilities of Service component logistics processes to build the logistics common operating picture and associated actions. 8. Integrated

Study on relationship of performance shaping factor in human error probability with prevalent stress of PUSPATI TRIGA reactor operators

NASA Astrophysics Data System (ADS)

Rahim, Ahmad Nabil Bin Ab; Mohamed, Faizal; Farid, Mohd Fairus Abdul; Fazli Zakaria, Mohd; Sangau Ligam, Alfred; Ramli, Nurhayati Binti

2018-01-01

Human factor can be affected by prevalence stress measured using Depression, Anxiety and Stress Scale (DASS). From the respondents feedback can be summarized that the main factor causes the highest prevalence stress is due to the working conditions that require operators to handle critical situation and make a prompt critical decisions. The relationship between the prevalence stress and performance shaping factors found that PSFFitness and PSFWork Process showed positive Pearson’s Correlation with the score of .763 and .826 while the level of significance, p = .028 and p = .012. These positive correlations with good significant values between prevalence stress and human performance shaping factor (PSF) related to fitness, work processes and procedures. The higher the stress level of the respondents, the higher the score of selected for the PSFs. This is due to the higher levels of stress lead to deteriorating physical health and cognitive also worsened. In addition, the lack of understanding in the work procedures can also be a factor that causes a growing stress. The higher these values will lead to the higher the probabilities of human error occur. Thus, monitoring the level of stress among operators RTP is important to ensure the safety of RTP.

Quantification of uncertainty in the prediction of railway induced ground vibration due to the use of statistical track unevenness data

NASA Astrophysics Data System (ADS)

Lombaert, G.; Galvín, P.; François, S.; Degrande, G.

2014-09-01

Environmental vibrations due to railway traffic are predominantly due to dynamic axle loads caused by wheel and track unevenness and impact excitation by rail joints and wheel flats. Because of its irregular character, track unevenness is commonly processed statistically and represented by its power spectral density function or its root mean square (RMS) value in one-third octave bands. This statistical description does not uniquely define the track unevenness at a given site, however, and different track unevenness profiles matching the statistical description will lead to different predictions of dynamic axle loads and resulting ground vibration. This paper presents a methodology that allows quantifying the corresponding variability in ground vibration predictions. The procedure is derived assuming the geometry of the track and soil to be homogeneous along the track. The procedure is verified by means of Monte Carlo simulations and its usefulness for assessing the mismatch between predicted and measured ground vibrations is demonstrated in a case study. The results show that the response in time domain and its narrow band spectrum exhibit significant variability which is reduced when the running RMS value or the one-third octave band spectrum of the response is considered.

Regenerative endodontics: A way forward.

PubMed

Diogenes, Anibal; Ruparel, Nikita B; Shiloah, Yoav; Hargreaves, Kenneth M

2016-05-01

Immature teeth are susceptible to infections due to trauma, anatomic anomalies, and caries. Traditional endodontic therapies for immature teeth, such as apexification procedures, promote resolution of the disease and prevent future infections. However, these procedures fail to promote continued root development, leaving teeth susceptible to fractures. Regenerative endodontic procedures (REPs) have evolved in the past decade, being incorporated into endodontic practice and becoming a viable treatment alternative for immature teeth. The authors have summarized the status of regenerative endodontics on the basis of the available published studies and provide insight into the different levels of clinical outcomes expected from these procedures. Substantial advances in regenerative endodontics are allowing a better understanding of a multitude of factors that govern stem cell-mediated regeneration and repair of the damaged pulp-dentin complex. REPs promote healing of apical periodontitis, continued radiographic root development, and, in certain cases, vitality responses. Despite the clinical success of these procedures, they appear to promote a guided endodontic repair process rather than a true regeneration of physiological-like tissue. Immature teeth with pulpal necrosis with otherwise poor prognosis can be treated with REPs. These procedures do not preclude the possibility of apexification procedures if attempts are unsuccessful. Therefore, REPs may be considered first treatment options for immature teeth with pulpal necrosis. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Automating PACS quality control with the Vanderbilt image processing enterprise resource

NASA Astrophysics Data System (ADS)

Esparza, Michael L.; Welch, E. Brian; Landman, Bennett A.

2012-02-01

Precise image acquisition is an integral part of modern patient care and medical imaging research. Periodic quality control using standardized protocols and phantoms ensures that scanners are operating according to specifications, yet such procedures do not ensure that individual datasets are free from corruption; for example due to patient motion, transient interference, or physiological variability. If unacceptable artifacts are noticed during scanning, a technologist can repeat a procedure. Yet, substantial delays may be incurred if a problematic scan is not noticed until a radiologist reads the scans or an automated algorithm fails. Given scores of slices in typical three-dimensional scans and widevariety of potential use cases, a technologist cannot practically be expected inspect all images. In large-scale research, automated pipeline systems have had great success in achieving high throughput. However, clinical and institutional workflows are largely based on DICOM and PACS technologies; these systems are not readily compatible with research systems due to security and privacy restrictions. Hence, quantitative quality control has been relegated to individual investigators and too often neglected. Herein, we propose a scalable system, the Vanderbilt Image Processing Enterprise Resource (VIPER) to integrate modular quality control and image analysis routines with a standard PACS configuration. This server unifies image processing routines across an institutional level and provides a simple interface so that investigators can collaborate to deploy new analysis technologies. VIPER integrates with high performance computing environments has successfully analyzed all standard scans from our institutional research center over the course of the last 18 months.

Surgeon Design Interface for Patient-Specific Concentric Tube Robots

PubMed Central

Morimoto, Tania K.; Greer, Joseph D.; Hsieh, Michael H.; Okamura, Allison M.

2017-01-01

Concentric tube robots have potential for use in a wide variety of surgical procedures due to their small size, dexterity, and ability to move in highly curved paths. Unlike most existing clinical robots, the design of these robots can be developed and manufactured on a patient- and procedure-specific basis. The design of concentric tube robots typically requires significant computation and optimization, and it remains unclear how the surgeon should be involved. We propose to use a virtual reality-based design environment for surgeons to easily and intuitively visualize and design a set of concentric tube robots for a specific patient and procedure. In this paper, we describe a novel patient-specific design process in the context of the virtual reality interface. We also show a resulting concentric tube robot design, created by a pediatric urologist to access a kidney stone in a pediatric patient. PMID:28656124

Surgeon Design Interface for Patient-Specific Concentric Tube Robots.

PubMed

Morimoto, Tania K; Greer, Joseph D; Hsieh, Michael H; Okamura, Allison M

2016-06-01

Concentric tube robots have potential for use in a wide variety of surgical procedures due to their small size, dexterity, and ability to move in highly curved paths. Unlike most existing clinical robots, the design of these robots can be developed and manufactured on a patient- and procedure-specific basis. The design of concentric tube robots typically requires significant computation and optimization, and it remains unclear how the surgeon should be involved. We propose to use a virtual reality-based design environment for surgeons to easily and intuitively visualize and design a set of concentric tube robots for a specific patient and procedure. In this paper, we describe a novel patient-specific design process in the context of the virtual reality interface. We also show a resulting concentric tube robot design, created by a pediatric urologist to access a kidney stone in a pediatric patient.

Landsat-5 TM reflective-band absolute radiometric calibration

USGS Publications Warehouse

Chander, G.; Helder, D.L.; Markham, B.L.; Dewald, J.D.; Kaita, E.; Thome, K.J.; Micijevic, E.; Ruggles, T.A.

2004-01-01

The Landsat-5 Thematic Mapper (TM) sensor provides the longest running continuous dataset of moderate spatial resolution remote sensing imagery, dating back to its launch in March 1984. Historically, the radiometric calibration procedure for this imagery used the instrument's response to the Internal Calibrator (IC) on a scene-by-scene basis to determine the gain and offset of each detector. Due to observed degradations in the IC, a new procedure was implemented for U.S.-processed data in May 2003. This new calibration procedure is based on a lifetime radiometric calibration model for the instrument's reflective bands (1-5 and 7) and is derived, in part, from the IC response without the related degradation effects and is tied to the cross calibration with the Landsat-7 Enhanced Thematic Mapper Plus. Reflective-band absolute radiometric accuracy of the instrument tends to be on the order of 7% to 10%, based on a variety of calibration methods.

Semihard processes with BLM renormalization scale setting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caporale, Francesco; Ivanov, Dmitry Yu.; Murdaca, Beatrice

We apply the BLM scale setting procedure directly to amplitudes (cross sections) of several semihard processes. It is shown that, due to the presence of β{sub 0}-terms in the NLA results for the impact factors, the obtained optimal renormalization scale is not universal, but depends both on the energy and on the process in question. We illustrate this general conclusion considering the following semihard processes: (i) inclusive production of two forward high-p{sub T} jets separated by large interval in rapidity (Mueller-Navelet jets); (ii) high-energy behavior of the total cross section for highly virtual photons; (iii) forward amplitude of the productionmore » of two light vector mesons in the collision of two virtual photons.« less

A toxicity reduction evaluation for an oily waste treatment plant exhibiting episodic effluent toxicity.

PubMed

Erten-Unal, M; Gelderloos, A B; Hughes, J S

1998-07-30

A Toxicity Reduction Evaluation (TRE) was conducted on the oily wastewater treatment plant (Plant) at a Naval Fuel Depot. The Plant treats ship and ballast wastes, berm water from fuel storage areas and wastes generated in the fuel reclamation plant utilizing physical/chemical treatment processes. In the first period of the project (Period I), the TRE included chemical characterization of the plant wastewaters, monitoring the final effluent for acute toxicity and a thorough evaluation of each treatment process and Plant operating procedures. Toxicity Identification Evaluation (TIE) procedures were performed as part of the overall TRE to characterize and identify possible sources of toxicity. Several difficulties were encountered because the effluent was saline, test organisms were marine species and toxicity was sporadic and unpredictable. The treatability approach utilizing enhancements, improved housekeeping, and operational changes produced substantial reductions in the acute toxicity of the final effluent. In the second period (Period II), additional acute toxicity testing and chemical characterization were performed through the Plant to assess the long-term effects of major unit process improvements for the removal of toxicity. The TIE procedures were also modified for saline wastewaters to focus on suspected class of toxicants such as surfactants. The TRE was successful in reducing acute toxicity of the final effluent through process improvements and operational modifications. The results indicated that the cause of toxicity was most likely due to combination of pollutants (matrix effect) rather than a single pollutant.

Alternative Green Solvents Project

NASA Technical Reports Server (NTRS)

Maloney, Phillip R.

2012-01-01

Necessary for safe and proper functioning of equipment. Mainly halogenated solvents. Tetrachloride, Trichloroethylene (TCE), CFC-113. No longer used due to regulatory/safety concerns. Precision Cleaning at KSC: Small % of total parts. Used for liquid oxygen (LOX) systems. Dual solvent process. Vertrel MCA (decafluoropentane (DFP) and trons-dichloroethylene) HFE-7100. DFP has long term environmental concerns. Project Goals: a) Identify potential replacements. b) 22 wet chemical processes. c) 3 alternative processes. d) Develop test procedures. e) Contamination and cleaning. f) Analysis. g) Use results to recommend alternative processes. Conclusions: a) No alternative matched Vertrel in this study. b) No clear second place solvent. c) Hydrocarbons- easy; Fluorinated greases- difficult. d) Fluorinated component may be needed in replacement solvent. e) Process may need to make up for shortcoming of the solvent. f) Plasma and SCC02 warrant further testing.

KSC-97pc671

NASA Image and Video Library

1997-04-17

The Spacelab long transfer tunnel that leads from the Space Shuttle Orbiter Columbia’s crew airlock to the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the spaceplane’s payload bay is removed in Orbiter Processing Facility 1. The tunnel was taken out to allow better access to the MSL-1 module during reservicing operations to prepare it for its reflight as MSL-1R. That mission is now scheduled to lift off July 1. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for quick relaunch turnaround times for future payloads. The Spacelab module was scheduled to fly again with the full complement of STS-83 experiments after that mission was cut short due to a faulty fuel cell. During the scheduled 16-day reflight, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

Automated decontamination of surface-adherent prions.

PubMed

Schmitt, A; Westner, I M; Reznicek, L; Michels, W; Mitteregger, G; Kretzschmar, H A

2010-09-01

At present there is no routinely available decontamination procedure in washer-disinfectors to allow the reliable inactivation and/or elimination of prions present on reusable surgical instruments. This means that is not possible to provide assurance for preventing iatrogenic transmission of prion diseases. We need effective procedures in prion decontamination that can be integrated into the usual routine of reprocessing surgical instruments. This article reports on the evaluation of an automated process designed to decontaminate prions in washer-disinfectors using a quantitative, highly sensitive in vivo assay for surface-adherent 22L prions. The automated process showed great advantages when compared with conventional alkaline cleaning. In contrast, the new process was as effective as autoclaving at 134 degrees C for 2h and left no detectable prion infectivity, even for heavily contaminated surfaces. This indicates a reduction of surface-adherent prion infectivity of >7 log units. Due to its compatibility with even delicate surgical instruments, the process can be integrated into the large scale reprocessing of instruments in a central sterile supply department. The system could potentially make an important contribution to the prevention of iatrogenic transmission of prions. Copyright 2010 The Hospital Infection Society. Published by Elsevier Ltd. All rights reserved.

KSC-97PC880

NASA Image and Video Library

1997-06-04

The Space Shuttle Orbiter Columbia is reflected in a nearby pond as it rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF) 1 atop its transporter in preparation for the STS-94 mission. Once inside the VAB, Columbia will be hoisted to be mated with its solid rocket boosters and external tank. Columbia was moved to the OPF April 8 after the completion of the STS-83 mission. KSC payloads processing employees then began work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the orbiter’s payload bay for the STS-94 mission. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for possible quick relaunch turnaround times for future payloads. The MSL-1 module will fly again with the full complement of STS-83 experiments after that mission was cut short due to indications of a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

[Current Perceptions of Lipofilling on the Basis of the New Guideline on "Autologous Fat Grafting"].

PubMed

Prantl, L; Rennekampff, H O; Giunta, R E; Harder, Y; von Heimburg, D; Heine, N; Herold, C; Kneser, U; Lampert, F; Machens, H G; Mirastschijski, U; Müller, D; Pallua, N; Schantz, T; Schönborn, A; Ueberreiter, K; Witzel, C H; Bull, G; Rezek, D; Sattler, G; Vogt, P M; Horch, R E

2016-12-01

Introduction: Autologous fat transfer has recently become an increasingly popular surgical procedure and comprises harvesting, processing and transplantation of adipose tissue, as well as professional follow-up care. This method, as a surgical procedure, can be utilised for trauma-, disease- or age-related soft tissue volume deficits and soft tissue augmentation. As usage is increasing, but the variables of fat harvest, specific indications and fashion of fat transfer are poorly defined, there is a great demand for development of a guideline in the field of reconstructive and aesthetic surgery. Methods: All relevant points were discussed within the scope of a consensus conference including a nominal group process of all societies involved in the procedure and ratified with a strong consensus (>95%). Literature from the standard medical databases over the last 10 years was retrieved, studied and specific guidelines were concluded. Results: Consensus was achieved among all professionals involved on the following points: 1. definition 2. indication/contraindication, 3. preoperative measures 4. donor sites 5. techniques of processing 6. transplantation 7. follow-up care 8. storage 9. efficacy 10. documentation 11. evaluation of patient safety. Conclusion: Definite indications and professional expertise are paramount for autologous fat tissue transfer. Successful transfers are based on the use of correct methods as well as specific instruments and materials. Autologous adipose tissue transplantation is considered to be a safe procedure in reconstructive and aesthetic surgery, due to the low rate of postoperative complications and sequelae. © Georg Thieme Verlag KG Stuttgart · New York.

Processes and experiences of Portugal's international recruitment scheme of Colombian physicians: Did it work?

PubMed

Masanet, Erika

2017-08-01

The Portuguese Ministry of Health performed five international recruitment rounds of Latin American physicians due to the need for physicians in certain geographic areas of the country and in some specialties, as a temporary solution to shortages. Among these recruitments is that of Colombian physicians in 2011 that was the largest of the five groups. This paper presents an evaluation of the international recruitment procedure of Colombian physicians based on the criteria of procedural outcomes and health system outcomes. The methodology used is qualitative, based on semi-structured interviews with key informants and Colombian physicians recruited in Portugal and also on documentary analysis of secondary sources. International recruitment of Colombian physicians coincided with a period of political change and severe economic crisis in Portugal that caused some problems in the course of this recruitment, mainly family reunification in the later group of Colombian physicians and non-compliance of the salary originally agreed upon. Furthermore, due to the continuous resignations of Colombian physicians throughout the 3-year contract, procedural outcomes and health system outcomes of this international recruitment were not fulfilled and therefore the expected results to meet the temporary needs for medical personnel in some areas of the country were not accomplished. Copyright © 2017 Elsevier B.V. All rights reserved.

Pictorial essay: Vascular interventions in extra cranial head and neck

PubMed Central

Kulkarni, Suyash S; Shetty, Nitin S; Dharia, Tejas P; Polnaya, Ashwin M

2012-01-01

Medicine is an ever changing field and interventional radiology (IR) procedures are becoming increasingly popular because of high efficacy and its minimally invasive nature of the procedure. Management of disease processes in the extra cranial head and neck (ECHN) has always been a challenge due to the complex anatomy of the region. Cross sectional imaging of the ECHN has grown and evolved tremendously and occupies a pivotal and integral position in the clinical management of variety of head and neck pathologies. Advances in angiographic technologies including flat panel detector systems, biplane, and 3-dimensional rotational angiography have consolidated and expanded the role of IR in the management of various ECHN pathologies. The ECHN is at cross roads between the origins of great vessels and the cerebral vasculature. Thorough knowledge of functional and technical aspects of neuroangiography is essential before embarking on head and neck vascular interventions. The vessels of the head and neck can be involved by infectious and inflammatory conditions, get irradiated during radiotherapy and injured due to trauma or iatrogenic cause. The ECHN is also a common site for various hypervascular neoplasms and vascular malformations, which can be treated with endovascular and percutaneous embolization. This pictorial essay provides a review of variety of ECHN pathologies which were managed by various IR procedures using different approaches. PMID:23833428

The Resin-Embedded Cornea Prepared Via Rapid Processing Protocol : A Good Histomorphometric Target for Clinical Investigation in Ophthalmology and Optometry

PubMed Central

Cheah, Pike See; Mohidin, Norhani; Mohd Ali, Bariah; Maung, Myint; Latif, Azian Abdul

2008-01-01

This study illustrates and quantifies the changes on corneal tissue between the paraffin-embedded and resin-embedded blocks and thus, selects a better target in investigational ophthalmology and optometry via light microscopy. Corneas of two cynomolgus monkeys (Macaca fascicularis) were used in this study. The formalin-fixed cornea was prepared in paraffin block via the conventional tissue processing protocol (4-day protocol) and stained with haematoxylin and eosin. The glutaraldehyde-fixed cornea was prepared in resin block via the rapid and modified tissue processing procedure (1.2-day protocol) and stained with toluidine blue. The paraffin-embedded sample exhibits various undesired tissue damage and artifact such as thinner epithelium (due to the substantial volumic extraction from the tissue), thicker stroma layer (due to the separation of lamellae and the presence of voids) and the distorted endothelium. In contrast, the resin-embedded corneal tissue has demonstrated satisfactory corneal ultrastructural preservation. The rapid and modified tissue processing method for preparing the resin-embedded is particularly beneficial to accelerate the microscopic evaluation in ophthalmology and optometry. PMID:22570589

Can sample treatments based on advanced oxidation processes assisted by high-intensity focused ultrasound be used for toxic arsenic determination in human urine by flow-injection hydride-generation atomic absorption spectrometry?

PubMed

Correia, A; Galesio, M; Santos, H; Rial-Otero, R; Lodeiro, C; Oehmen, A; Conceição, Antonio C L; Capelo, J L

2007-05-15

Two advanced oxidation processes (AOPs), based on high-intensity focused ultrasound (HIFU), namely, KMnO(4)/HCl/HIFU and H(2)O(2)/HCl/HIFU are studied and compared for the determination of toxic arsenic in human urine [As(III)+As(V)+MMA+DMA] by flow-injection hydride-generation atomic absorption spectrometry (FI-HG-AAS). The KMnO(4)/HCl/HIFU procedure was found to be adequate for organic matter degradation in human urine. l-cysteine (letra minuscula) was used for As reduction to the trivalent state. The new procedure was assessed with seven urines certified in different As species. Results revealed that with KMnO(4)/HCl/HIFU plus l-cysteine the toxic arsenic can be accurately measured in human urine whilst the H(2)O(2)/HCl/HIFU procedure underestimates toxic As. DMA and MMA degradation in urine were observed, due to the effects of the ultrasonic field. Recoveries for As(III), As(V), MMA and DMA were within the certified ranges. Arsenobetaine was not degraded by the AOPs. The new procedure adheres well to the principles of analytical minimalism: (i) low reagent consumption, (ii) low reagent concentration, (iii) low waste production and (iv) low amount of time required for sample preparation and analysis.

Robot-Assisted Transoral Odontoidectomy : Experiment in New Minimally Invasive Technology, a Cadaveric Study

PubMed Central

Yang, Moon Sul; Yoon, Tae Ho; Yoon, Do Heum; Kim, Keung Nyun; Pennant, William

2011-01-01

Objective In the field of spinal surgery, a few laboratory results or clinical cases about robotic spinal surgery have been reported. In vivo trials and development of related surgical instruments for spinal surgery are required before its clinical application. We investigated the use of the da Vinci® Surgical System in spinal surgery at the craniovertebral junction in a human cadaver to demonstrate the efficacy and pitfalls of robotic surgery. Methods Dissection of pharyngeal wall to the exposure of C1 and odontoid process was performed with full robotic procedure. Although assistance of another surgeon was necessary for drilling and removal of odontoid process due to the lack of appropriate end-effectors, successful robotic procedures for dural sutures and exposing spinal cord proved its safety and dexterity. Results Robot-assisted odontoidectomy was successfully performed in a human cadaver using the da Vinci® Surgical System with few robotic arm collisions and minimal soft tissue damages. Da Vinci® Surgical System manifested more dexterous movement than human hands in the deep and narrow oral cavity. Furthermore, sutures with robotic procedure in the oral cavity demonstrated the advantage over conventional procedure. Conclusion Presenting cadaveric study proved the probability of robot-assisted transoral approach. However, the development of robotic instruments specific to spinal surgery must first precede its clinical application. PMID:21607188

Reconstruction of the modified discrete Langevin equation from persistent time series

DOE Office of Scientific and Technical Information (OSTI.GOV)

Czechowski, Zbigniew

The discrete Langevin-type equation, which can describe persistent processes, was introduced. The procedure of reconstruction of the equation from time series was proposed and tested on synthetic data, with short and long-tail distributions, generated by different Langevin equations. Corrections due to the finite sampling rates were derived. For an exemplary meteorological time series, an appropriate Langevin equation, which constitutes a stochastic macroscopic model of the phenomenon, was reconstructed.

Heuristic decomposition for non-hierarchic systems

NASA Technical Reports Server (NTRS)

Bloebaum, Christina L.; Hajela, P.

1991-01-01

Design and optimization is substantially more complex in multidisciplinary and large-scale engineering applications due to the existing inherently coupled interactions. The paper introduces a quasi-procedural methodology for multidisciplinary optimization that is applicable for nonhierarchic systems. The necessary decision-making support for the design process is provided by means of an embedded expert systems capability. The method employs a decomposition approach whose modularity allows for implementation of specialized methods for analysis and optimization within disciplines.

Debarment and suspension. [of contractors

NASA Technical Reports Server (NTRS)

Whelan, Thomas J.

1987-01-01

The changing Government attitude toward contractor debarment and suspension is examined, with emphasis on the fact that the Government is more alert to fraud, waste, and abuse. Consideration is given to causes of debarment or suspension, procedures and due process hearings, settlement agreements, compliance programs, and recent related legislation. It is concluded that the change in the Government contracting environment in recent years should be sufficient incentive for contractors to monitor their operations more closely.

A stochastic estimation procedure for intermittently-observed semi-Markov multistate models with back transitions.

PubMed

Aralis, Hilary; Brookmeyer, Ron

2017-01-01

Multistate models provide an important method for analyzing a wide range of life history processes including disease progression and patient recovery following medical intervention. Panel data consisting of the states occupied by an individual at a series of discrete time points are often used to estimate transition intensities of the underlying continuous-time process. When transition intensities depend on the time elapsed in the current state and back transitions between states are possible, this intermittent observation process presents difficulties in estimation due to intractability of the likelihood function. In this manuscript, we present an iterative stochastic expectation-maximization algorithm that relies on a simulation-based approximation to the likelihood function and implement this algorithm using rejection sampling. In a simulation study, we demonstrate the feasibility and performance of the proposed procedure. We then demonstrate application of the algorithm to a study of dementia, the Nun Study, consisting of intermittently-observed elderly subjects in one of four possible states corresponding to intact cognition, impaired cognition, dementia, and death. We show that the proposed stochastic expectation-maximization algorithm substantially reduces bias in model parameter estimates compared to an alternative approach used in the literature, minimal path estimation. We conclude that in estimating intermittently observed semi-Markov models, the proposed approach is a computationally feasible and accurate estimation procedure that leads to substantial improvements in back transition estimates.

Occurrence of pneumomediastinum due to dental procedures.

PubMed

Aslaner, Mehmet Ali; Kasap, Gül Nihal; Demir, Cihat; Akkaş, Meltem; Aksu, Nalan M

2015-01-01

The occurrence of pneumomediastinum and massive subcutaneous emphysema due to dental procedures is quite rare. We present a case of pneumomediastinum and massive subcutaneous emphysema that occurred during third molar tooth extraction with air-turbine handpiece.

Ex-vivo multiphoton analysis of rabbit corneal wound healing following photorefractive keratectomy

NASA Astrophysics Data System (ADS)

Wang, Tsung-Jen; Lo, Wen; Dong, Chen-Yuan; Hu, Fung-Rong

2008-02-01

The aim of this study is to assess the application of multiphoton autofluorescence and second harmonic generation (SHG) microscopy for investigating corneal wound healing after high myopic (-10.0D) photorefractive keratectomy (PRK) procedures on the rabbit eyes. The effect of PRK on the morphology and distribution of keratocytes were investigated using multiphoton excited autofluorescence imaging, while the effect of PRK on the arrangement of collagen fibers was monitored by second-harmonic generation imaging. Without histological processing, multiphoton microscopy is able to characterize corneal damage and wound healing from PRK. Our results show that this technique has potential application in the clinical evaluation of corneal damage due to refractive surgery, and may be used to study the unwanted side effects of these procedures.

Optimal Signal Filtration in Optical Sensors with Natural Squeezing of Vacuum Noises

NASA Technical Reports Server (NTRS)

Gusev, A. V.; Kulagin, V. V.

1996-01-01

The structure of optimal receiver is discussed for optical sensor measuring a small displacement of probe mass. Due to nonlinear interaction of the field and the mirror, a reflected wave is in squeezed state (natural squeezing), two quadratures of which are correlated and therefore one can increase signal-to-noise ratio and overcome the SQL. A measurement procedure realizing such correlation processing of two quadratures is clarified. The required combination of quadratures can be produced via mixing of pump field reflected from the mirror with local oscillator phase modulated field in duel-detector homodyne scheme. Such measurement procedure could be useful not only for resonant bar gravitational detector but for laser longbase interferometric detectors as well.

Behavioral and physiological adaptation to repeated chair restraint in rhesus macaques.

PubMed

Ruys, J D; Mendoza, S P; Capitanio, J P; Mason, W A

2004-09-15

Physical restraint is a commonly used procedure when working closely with nonhuman primates. Nonhuman primates show rapid behavioral changes when learning the restraint procedure, and these changes have been taken to reflect behavioral and physiological habituation to the procedure. This study examined the behavioral and adrenocortical responses to repeated physical restraint in a large sample of adult male rhesus monkeys. Subjects showed a decline in behavioral agitation and cortisol concentrations across seven consecutive days of restraint. The changes in adrenocortical responsiveness were also coincident with an increased sensitivity to dexamethasone and a change in early morning basal cortisol secretion. The subjects were restrained for a single session 6 months later, and while the reduction in behavioral agitation was still present, the majority of changes in adrenocortical responsiveness were no longer present. These data show that behavior is not necessarily an indicator of underlying physiological processes and that the reduction of hypothalamic-pituitary-adrenal (HPA) activity with repeated restraint is due to physiological adaptation to high glucocorticoid concentrations and not to psychological habituation to the restraint procedures.

Development of a drift-correction procedure for a direct-reading spectrometer

NASA Technical Reports Server (NTRS)

Chapman, G. B., II; Gordon, W. A.

1977-01-01

A procedure which provides automatic correction for drifts in the radiometric sensitivity of each detector channel in a direct-reading emission spectrometer is described. Such drifts are customarily controlled by the regular analyses of standards, which provide corrections for changes in the excitational, optical, and electronic components of the instrument. This standardization procedure, however, corrects for the optical and electronic drifts. It is a step that must be taken if the time, effort, and cost of processing standards is to be minimized. This method of radiometric drift correction uses a 1,000-W tungsten-halogen reference lamp to illuminate each detector through the same optical path as that traversed during sample analysis. The responses of the detector channels to this reference light are regularly compared with channel response to the same light intensity at the time of analytical calibration in order to determine and correct for drift. Except for placing the lamp in position, the procedure is fully automated and compensates for changes in spectral intensity due to variations in lamp current. A discussion of the implementation of this drift-correction system is included.

Contamination of blood cultures during venepuncture: fact or myth?

PubMed Central

Shahar, E.; Wohl-Gottesman, B. S.; Shenkman, L.

1990-01-01

Contamination of blood cultures is believed to occur mainly during the venepuncture procedure. Consequently, meticulous preparation of the venepuncture site is widely recommended. To determine whether the contamination rate is indeed affected by the quality of the antiseptic procedure at the venepuncture site, 181 paired cultures were collected from 176 patients during a 6-month period after either strict antiseptic cleansing of skin with alcohol followed by povidone-iodine, or after brief disinfection with alcohol alone. The contamination rate was not influenced by the antiseptic procedure, and corresponded to the accepted percentage reported in most other studies. Eight false positive cultures (4.4%) were obtained after strict antisepsis of the skin and 6 (3.3%) after short simple cleansing with alcohol (P = 0.39). Our results suggest that contamination of blood cultures may not be related to the venepuncture procedure--regardless of the antiseptic technique used--but may be due to later stages of laboratory handling and processing of the specimens. Review of the literature has provided further indirect evidence to support this conclusion. PMID:2084653

A bronchoscopic approach to benign subglottic stenosis.

PubMed

Raman, Tuhina; Chatterjee, Kshitij; Alzghoul, Bashar N; Innabi, Ayoub A; Tulunay, Ozlem; Bartter, Thaddeus; Meena, Nikhil K

2017-01-01

Subglottic stenosis is an abnormal narrowing of the tracheal lumen at the level of subglottis (the area in between the vocal cords and the cricoid cartilage). It can cause significant symptoms due to severe attenuation of airflow. We describe our experience in alleviating symptoms by addressing the stenosis using fibreoptic bronchoscopic methods. We report all concurrent cases performed between September 2015 and July 2016. We use a combination of balloon dilation, electro-surgery knife to dilate and incise stenotic segments followed by steroid injection to modulate healing. We treated 10 patients in the study period, 8 of which were women. A total of 39 procedures were performed on these patients during this period. Gastro-esophageal reflux was the most common comorbidity associated with stenosis. The majority of the patients required more than 2 therapeutic procedures, but none required more than 4 procedures. There were no complications. Tracheal stenosis and in particular subglottic stenosis is a recurrent process and its management requires extensive collaboration amongst treating specialties. Our technique of steroid injection after dilation of the stenosis was effective in symptom control and decreased the number of repeat procedures.

Application of industry-standard guidelines for the validation of avionics software

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Shagnea, Anita M.

1990-01-01

The application of industry standards to the development of avionics software is discussed, focusing on verification and validation activities. It is pointed out that the procedures that guide the avionics software development and testing process are under increased scrutiny. The DO-178A guidelines, Software Considerations in Airborne Systems and Equipment Certification, are used by the FAA for certifying avionics software. To investigate the effectiveness of the DO-178A guidelines for improving the quality of avionics software, guidance and control software (GCS) is being developed according to the DO-178A development method. It is noted that, due to the extent of the data collection and configuration management procedures, any phase in the life cycle of a GCS implementation can be reconstructed. Hence, a fundamental development and testing platform has been established that is suitable for investigating the adequacy of various software development processes. In particular, the overall effectiveness and efficiency of the development method recommended by the DO-178A guidelines are being closely examined.

Heuristic algorithms for the minmax regret flow-shop problem with interval processing times.

PubMed

Ćwik, Michał; Józefczyk, Jerzy

2018-01-01

An uncertain version of the permutation flow-shop with unlimited buffers and the makespan as a criterion is considered. The investigated parametric uncertainty is represented by given interval-valued processing times. The maximum regret is used for the evaluation of uncertainty. Consequently, the minmax regret discrete optimization problem is solved. Due to its high complexity, two relaxations are applied to simplify the optimization procedure. First of all, a greedy procedure is used for calculating the criterion's value, as such calculation is NP-hard problem itself. Moreover, the lower bound is used instead of solving the internal deterministic flow-shop. The constructive heuristic algorithm is applied for the relaxed optimization problem. The algorithm is compared with previously elaborated other heuristic algorithms basing on the evolutionary and the middle interval approaches. The conducted computational experiments showed the advantage of the constructive heuristic algorithm with regards to both the criterion and the time of computations. The Wilcoxon paired-rank statistical test confirmed this conclusion.

Non-thermal inactivation of Noroviruses in food

NASA Astrophysics Data System (ADS)

Velebit, B.; Petronijević, R.; Bošković, T.

2017-09-01

An increased incidence of foodborne illnesses caused by Norovirus and consumer demand for fresh, convenient, and safe foods have prompted research into alternative antiviral processing technologies. Chlorine dioxide, UV treatment and thermal processing are standard antinoroviral technologies that have been employed for a while; however, they tend to be non-effective in modern processing due to residue concerns (ClO2), shadowing effects (UV) and low-energy efficiency (heat treatment). Alternative technologies have been validated such as ozone treatment, high pressure processing and pulse electric fields. Although these techniques are promising, none of them individually can deem food free of Norovirus. Further research on the effects on Norovirus in various food matrices is required. Good manufacturing practices and proper sanitation procedures remain the “gold” safety tools in food business.

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... review are intended to lead to improvements in work zone processes and procedures, data and information... 23 Highways 1 2010-04-01 2010-04-01 false State-level processes and procedures. 630.1008 Section... OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1008 State-level processes and...

Equivalent model construction for a non-linear dynamic system based on an element-wise stiffness evaluation procedure and reduced analysis of the equivalent system

NASA Astrophysics Data System (ADS)

Kim, Euiyoung; Cho, Maenghyo

2017-11-01

In most non-linear analyses, the construction of a system matrix uses a large amount of computation time, comparable to the computation time required by the solving process. If the process for computing non-linear internal force matrices is substituted with an effective equivalent model that enables the bypass of numerical integrations and assembly processes used in matrix construction, efficiency can be greatly enhanced. A stiffness evaluation procedure (STEP) establishes non-linear internal force models using polynomial formulations of displacements. To efficiently identify an equivalent model, the method has evolved such that it is based on a reduced-order system. The reduction process, however, makes the equivalent model difficult to parameterize, which significantly affects the efficiency of the optimization process. In this paper, therefore, a new STEP, E-STEP, is proposed. Based on the element-wise nature of the finite element model, the stiffness evaluation is carried out element-by-element in the full domain. Since the unit of computation for the stiffness evaluation is restricted by element size, and since the computation is independent, the equivalent model can be constructed efficiently in parallel, even in the full domain. Due to the element-wise nature of the construction procedure, the equivalent E-STEP model is easily characterized by design parameters. Various reduced-order modeling techniques can be applied to the equivalent system in a manner similar to how they are applied in the original system. The reduced-order model based on E-STEP is successfully demonstrated for the dynamic analyses of non-linear structural finite element systems under varying design parameters.

A simple methodology for characterization of germanium coaxial detectors by using Monte Carlo simulation and evolutionary algorithms.

PubMed

Guerra, J G; Rubiano, J G; Winter, G; Guerra, A G; Alonso, H; Arnedo, M A; Tejera, A; Gil, J M; Rodríguez, R; Martel, P; Bolivar, J P

2015-11-01

The determination in a sample of the activity concentration of a specific radionuclide by gamma spectrometry needs to know the full energy peak efficiency (FEPE) for the energy of interest. The difficulties related to the experimental calibration make it advisable to have alternative methods for FEPE determination, such as the simulation of the transport of photons in the crystal by the Monte Carlo method, which requires an accurate knowledge of the characteristics and geometry of the detector. The characterization process is mainly carried out by Canberra Industries Inc. using proprietary techniques and methodologies developed by that company. It is a costly procedure (due to shipping and to the cost of the process itself) and for some research laboratories an alternative in situ procedure can be very useful. The main goal of this paper is to find an alternative to this costly characterization process, by establishing a method for optimizing the parameters of characterizing the detector, through a computational procedure which could be reproduced at a standard research lab. This method consists in the determination of the detector geometric parameters by using Monte Carlo simulation in parallel with an optimization process, based on evolutionary algorithms, starting from a set of reference FEPEs determined experimentally or computationally. The proposed method has proven to be effective and simple to implement. It provides a set of characterization parameters which it has been successfully validated for different source-detector geometries, and also for a wide range of environmental samples and certified materials. Copyright © 2015 Elsevier Ltd. All rights reserved.

KSC-05pd2602

NASA Image and Video Library

2005-12-14

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman installs the gap filler between tiles on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence.

KSC-05pd2601

NASA Image and Video Library

2005-12-14

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman applies the Teflon-coated fabric to the gap filler before installation on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence.

Linear MALDI-ToF simultaneous spectrum deconvolution and baseline removal.

PubMed

Picaud, Vincent; Giovannelli, Jean-Francois; Truntzer, Caroline; Charrier, Jean-Philippe; Giremus, Audrey; Grangeat, Pierre; Mercier, Catherine

2018-04-05

Thanks to a reasonable cost and simple sample preparation procedure, linear MALDI-ToF spectrometry is a growing technology for clinical microbiology. With appropriate spectrum databases, this technology can be used for early identification of pathogens in body fluids. However, due to the low resolution of linear MALDI-ToF instruments, robust and accurate peak picking remains a challenging task. In this context we propose a new peak extraction algorithm from raw spectrum. With this method the spectrum baseline and spectrum peaks are processed jointly. The approach relies on an additive model constituted by a smooth baseline part plus a sparse peak list convolved with a known peak shape. The model is then fitted under a Gaussian noise model. The proposed method is well suited to process low resolution spectra with important baseline and unresolved peaks. We developed a new peak deconvolution procedure. The paper describes the method derivation and discusses some of its interpretations. The algorithm is then described in a pseudo-code form where the required optimization procedure is detailed. For synthetic data the method is compared to a more conventional approach. The new method reduces artifacts caused by the usual two-steps procedure, baseline removal then peak extraction. Finally some results on real linear MALDI-ToF spectra are provided. We introduced a new method for peak picking, where peak deconvolution and baseline computation are performed jointly. On simulated data we showed that this global approach performs better than a classical one where baseline and peaks are processed sequentially. A dedicated experiment has been conducted on real spectra. In this study a collection of spectra of spiked proteins were acquired and then analyzed. Better performances of the proposed method, in term of accuracy and reproductibility, have been observed and validated by an extended statistical analysis.

78 FR 61869 - Notice of Procedures To Be Followed in the Event Board Offices Are Closed Due to a Lapse in...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-04

... NATIONAL LABOR RELATIONS BOARD Notice of Procedures To Be Followed in the Event Board Offices Are Closed Due to a Lapse in Appropriated Funds AGENCY: National Labor Relations Board. ACTION: The National Labor Relations Board is issuing this notice to advise the public of procedures to be followed in the event that Board offices are closed, in...

Modeling treatment of ischemic heart disease with partially observable Markov decision processes.

PubMed

Hauskrecht, M; Fraser, H

1998-01-01

Diagnosis of a disease and its treatment are not separate, one-shot activities. Instead they are very often dependent and interleaved over time, mostly due to uncertainty about the underlying disease, uncertainty associated with the response of a patient to the treatment and varying cost of different diagnostic (investigative) and treatment procedures. The framework of Partially observable Markov decision processes (POMDPs) developed and used in operations research, control theory and artificial intelligence communities is particularly suitable for modeling such a complex decision process. In the paper, we show how the POMDP framework could be used to model and solve the problem of the management of patients with ischemic heart disease, and point out modeling advantages of the framework over standard decision formalisms.

The implementation of a quality assurance procedure for the Veterinary Services of France.

PubMed

Gerster, F; Guerson, N; Moreau, V; Mulnet, O; Provot, S; Salabert, C

2003-08-01

Due to the increasing complexity of food production systems and the concerns that these systems raise, there has been increasing demand from the general public for more State control of these processes. In France, it is the official Veterinary Services who are responsible for food safety and who must respond to these demands. The Veterinary Service is formulating a quality assurance procedure in accordance with standard EN 45004-ISO 17020, which determines the requirements that inspection bodies must follow to be recognised, at national, European and international level, as competent and reliable. As part of this procedure, the Veterinary Service will review requirements in terms of organisation, functions, qualifications and resources. The progress of inspection service orders, from their conception by the Central Administration, to their implementation by decentralised services, must be carefully managed. It is essential that service orders be implemented effectively and systematically by using recognised methods and issuing adequate inspection reports. The training and qualifications of inspectors are very important: their skills must remain up-to-date so that there is always a network of qualified staff, that is, staff who have an understanding of production processes and who have recognised competences in terms of initial training, continuous professional development and adequate experience. The quality systems implemented will only meet expectations if they are continuously monitored by means of regular evaluations. For this reason, both internal and external audits are performed. These new practices contribute to establishing a basis for the improvement of internal evaluation. In order to facilitate the implementation of a quality assurance procedure for inspection services, several tools, that are linked with the information system of the government department responsible for food, are, or will be, at the disposal of the decentralised Veterinary Services, i.e. a national database, mail and service order processing software, and inspection procedures.

Limitations of cadaveric organ donation on judicial cases and problems confronted in autopsy: Istanbul data in comparative perspective.

PubMed

Arslan, M N; Esen Melez, I; Melez, D O; Cavlak, M; Gur, A

2014-04-01

Organ transplantation is one of the most important services of modern medicine to the humanity. In judicial death cases the interaction between judicial needs and transplantation needs is inevitable and both should be provided in a short time before the decomposition of the body. Thus, the description of this interaction and the algorithm which should be carried out to manage these cases are important. Aim of this study is to determine the problems confronted in forensic autopsies and to determine what to do for both judicial processes' and cadaveric organ donations' not becoming limited due to each other. With these aims, autopsy case archive of the Council of Forensic Medicine Istanbul Morgue Department was reviewed, between the years 2009 and 2011, to reveal the number of organ donors among autopsy cases and also to find out the judicial problems confronted during autopsies. Among 12,016 judicial death cases referred to Istanbul Morgue Department in 3 years, 35 cases were found to have undergone cadaveric solid organ harvesting procedure and 307 cases cornea-only harvesting procedure. Manner of deaths for organ donor cases were blunt trauma due to traffic accident in 20 cases, firearm injury in 3 cases, stabbing in 2 cases, suspicious criminal battery in 4 cases and fatal falls in 5 cases. Only 1 case was suspected to have died due to high dose insulin administration. Through the whole data presented in this study, it can be concluded that consulting with the Forensic Medicine Expert not only for the autopsies but also during the clinical process of a judicial case, who is a candidate to be an organ donor, is absolutely important. The early contribution of the Forensic Medicine Expert would provide help to plan both the judicial process and the transplantation process which needs urgent decisions. A Forensic Medicine Expert may be an organ harvest team member performing initial investigations on the cause of death and collecting some of the toxicological screening samples when needed. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Airborne gamma-ray spectra processing: Extracting photopeaks.

PubMed

Druker, Eugene

2018-07-01

The acquisition of information from the airborne gamma-ray spectra is based on the ability to evaluate photopeak areas in regular spectra from natural and other sources. In airborne gamma-ray spectrometry, extraction of photopeaks of radionuclides from regular one-second spectra is a complex problem. In the region of higher energies, difficulties are associated with low signal level, i.e. low count rates, whereas at lower energies difficulties are associated with high noises due to a high signal level. In this article, a new procedure is proposed for processing the measured spectra up to and including the extraction of evident photopeaks. The procedure consists of reducing the noise in the energy channels along the flight lines, transforming the spectra into the spectra of equal resolution, removing the background from each spectrum, sharpening the details, and transforming the spectra back to the original energy scale. The resulting spectra are better suited for examining and using the photopeaks. No assumptions are required regarding the number, locations, and magnitudes of photopeaks. The procedure does not generate negative photopeaks. The resolution of the spectrometer is used for the purpose. The proposed methodology, apparently, will contribute also to study environmental problems, soil characterization, and other near-surface geophysical methods. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Detection and specific studies in procedural learning difficulties].

PubMed

Magallón, S; Narbona, J

2009-02-27

The main disabilities in non-verbal learning disorder (NLD) are: the acquisition and automating of motor and cognitive processes, visual spatial integration, motor coordination, executive functions, difficulty in comprehension of the context, and social skills. AIMS. To review the research to date on NLD, and to discuss whether the term 'procedural learning disorder' (PLD) would be more suitable to refer to NLD. A considerable amount of research suggests a neurological correlate of PLD with dysfunctions in the 'posterior' attention system, or the right hemisphere, or the cerebellum. Even if it is said to be difficult the delimitation between NLD and other disorders or syndromes like Asperger syndrome, certain characteristics contribute to differential diagnosis. Intervention strategies for the PLD must lead to the development of motor automatisms and problem solving strategies, including social skills. The basic dysfunction in NLD affects to implicit learning of routines, automating of motor skills and cognitive strategies that spare conscious resources in daily behaviours. These limitations are partly due to a dysfunction in non-declarative procedural memory. Various dimensions of language are also involved: context comprehension, processing of the spatial and emotional indicators of verbal language, language inferences, prosody, organization of the inner speech, use of language and non-verbal communication; this is why the diagnostic label 'PLD' would be more appropriate, avoiding the euphemistic adjective 'non-verbal'.

Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

PubMed

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2015-02-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Meta-analysis of the technical performance of an imaging procedure: Guidelines and statistical methodology

PubMed Central

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2017-01-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test–retest repeatability data for illustrative purposes. PMID:24872353

The Heterogeneity in Retrieved Relations between the Personality Trait ‘Harm Avoidance’ and Gray Matter Volumes Due to Variations in the VBM and ROI Labeling Processing Settings

PubMed Central

Van Schuerbeek, Peter; Baeken, Chris; De Mey, Johan

2016-01-01

Concerns are raising about the large variability in reported correlations between gray matter morphology and affective personality traits as ‘Harm Avoidance’ (HA). A recent review study (Mincic 2015) stipulated that this variability could come from methodological differences between studies. In order to achieve more robust results by standardizing the data processing procedure, as a first step, we repeatedly analyzed data from healthy females while changing the processing settings (voxel-based morphology (VBM) or region-of-interest (ROI) labeling, smoothing filter width, nuisance parameters included in the regression model, brain atlas and multiple comparisons correction method). The heterogeneity in the obtained results clearly illustrate the dependency of the study outcome to the opted analysis settings. Based on our results and the existing literature, we recommended the use of VBM over ROI labeling for whole brain analyses with a small or intermediate smoothing filter (5-8mm) and a model variable selection step included in the processing procedure. Additionally, it is recommended that ROI labeling should only be used in combination with a clear hypothesis and that authors are encouraged to report their results uncorrected for multiple comparisons as supplementary material to aid review studies. PMID:27096608

KSC-97PC879

NASA Image and Video Library

1997-06-04

While KSC workers in the Launch Complex 39 Area watch, The Space Shuttle Orbiter Columbia rolls over to the Vehicle Assembly Building (VAB) June 4 from Orbiter Processing Facility (OPF)1 atop its transporter in preparation for the STS-94 mission. Once inside the VAB, Columbia will be hoisted to be mated with its solid rocket boosters and external tank. Columbia was moved to the OPF April 8 after the completion of the STS-83 mission. KSC payloads processing employees then began work to reservice the Microgravity Science Laboratory-1 (MSL-1) Spacelab module in the orbiter’s payload bay for the STS-94 mission. This was the first time that this type of payload was reserviced without removing it from the payload bay. This new procedure pioneers processing efforts for possible quick relaunch turnaround times for future payloads. The MSL-1 module will fly again with the full complement of STS-83 experiments after that mission was cut short due to indications of a faulty fuel cell. During the scheduled 16-day STS-94 mission, the experiments will be used to test some of the hardware, facilities and procedures that are planned for use on the International Space Station while the flight crew conducts combustion, protein crystal growth and materials processing experiments

Letter and symbol identification: No evidence for letter-specific crowding mechanisms.

PubMed

Castet, Eric; Descamps, Marine; Denis-Noël, Ambre; Colé, Pascale

2017-09-01

It has been proposed that letters, as opposed to symbols, trigger specialized crowding processes, boosting identification of the first and last letters of words. This hypothesis is based on evidence that single-letter accuracy as a function of within-string position has a W shape (the classic serial position function [SPF] in psycholinguistics) whereas an inverted V shape is obtained when measured with symbols. Our main goal was to test the robustness of the latter result. Our hypothesis was that any letter/symbol difference might result from short-term visual memory processes (due to the partial report [PR] procedures used in SPF studies) rather than from crowding. We therefore removed the involvement of short-term memory by precueing target-item position and compared SPFs with precueing and postcueing. Perimetric complexity was stringently matched between letters and symbols. In postcueing conditions similar to previous studies, we did not reproduce the inverted V shape for symbols: Clear-cut W shapes were observed with an overall smaller accuracy for symbols compared to letters. This letter/symbol difference was dramatically reduced in precueing conditions in keeping with our prediction. Our results are not consistent with the claim that letter strings trigger specialized crowding processes. We argue that PR procedures are not fit to isolate crowding processes.

Sub-barrier radioactive ion beam investigations using a new methodology and analysis for the stacked target technique

NASA Astrophysics Data System (ADS)

Fisichella, M.; Shotter, A. C.; Di Pietro, A.; Figuera, P.; Lattuada, M.; Marchetta, C.; Privitera, V.; Romano, L.; Ruiz, C.; Zadro, M.

2015-12-01

For low energy reaction studies involving radioactive ion beams, the experimental reaction yields are generally small due to the low intensity of the beams. For this reason, the stacked target technique has been often used to measure excitation functions. This technique offers considerable advantages since the reaction cross-section at several energies can be simultaneously measured. In a further effort to increase yields, thick targets are also employed. The main disadvantage of the method is the degradation of the beam quality as it passes through the stack due to the statistical nature of energy loss processes and any nonuniformity of the stacked targets. This degradation can lead to ambiguities of associating effective beam energies to reaction product yields for the targets within the stack and, as a consequence, to an error in the determination of the excitation function for the reaction under study. A thorough investigation of these ambiguities is reported, and a best practice procedure of analyzing data obtained using the stacked target technique with radioactive ion beams is recommended. Using this procedure a re-evaluation is reported of some previously published sub-barrier fusion data in order to demonstrate the possibility of misinterpretations of derived excitation functions. In addition, this best practice procedure has been used to evaluate, from a new data set, the sub-barrier fusion excitation function for the reaction 6Li+120Sn .

Rectosigmoidian Involvement in Advanced-stage Ovarian Cancer – Intraoperative Decisions

PubMed Central

BACALBASA, NICOLAE; BALESCU, IRINA; DIMA, SIMONA

2017-01-01

Background/Aim: Ovarian cancer remains one of the most commonly encountered malignancies affecting women worldwide, that is unfortunately commonly diagnosed in advanced stages of the disease. In these stages, the tumoral process usually involves the surrounding viscera throughout contiguity or induces the apparition of distant metastases via peritoneal, lymphatic or hematogenous spread, multiple resections being needed in order to achieve a good control of the disease. Patients and Methods: In the present study, we present a case series of 12 patients in whom various surgical procedures on the rectosigmoidian loop were performed in order to achieve debulking surgery to no residual disease. Results: Digestive tract resections consisted of rectosigmoidian resection with left colostomy in three cases, low rectosigmoidian resections with anastomosis in eight cases and a stripping procedure of the peritoneal layer in one case. Conclusion: Due to the close proximity of the digestive and gynecological tract, advanced-stage ovarian tumors frequently involve the rectosigmoidian loop, imposing association of digestive tract surgical procedures. PMID:28882968

Rectosigmoidian Involvement in Advanced-stage Ovarian Cancer - Intraoperative Decisions.

PubMed

Bacalbasa, Nicolae; Balescu, Irina; Dima, Simona

2017-01-01

Ovarian cancer remains one of the most commonly encountered malignancies affecting women worldwide, that is unfortunately commonly diagnosed in advanced stages of the disease. In these stages, the tumoral process usually involves the surrounding viscera throughout contiguity or induces the apparition of distant metastases via peritoneal, lymphatic or hematogenous spread, multiple resections being needed in order to achieve a good control of the disease. In the present study, we present a case series of 12 patients in whom various surgical procedures on the rectosigmoidian loop were performed in order to achieve debulking surgery to no residual disease. Digestive tract resections consisted of rectosigmoidian resection with left colostomy in three cases, low rectosigmoidian resections with anastomosis in eight cases and a stripping procedure of the peritoneal layer in one case. Due to the close proximity of the digestive and gynecological tract, advanced-stage ovarian tumors frequently involve the rectosigmoidian loop, imposing association of digestive tract surgical procedures. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Determination of 105 antibiotic, anti-inflammatory, antiparasitic agents and tranquilizers by LC-MS/MS based on an acidic QuEChERS-like extraction.

PubMed

Desmarchelier, Aurélien; Fan, Kaïli; Minh Tien, Mai; Savoy, Marie-Claude; Tarres, Adrienne; Fuger, Denis; Goyon, Alexandre; Bessaire, Thomas; Mottier, Pascal

2018-04-01

A procedure for screening 105 veterinary drugs in foods by liquid chromatography tandem mass-spectrometry (LC-MS/MS) is presented. Its scope encompasses raw materials of animal origin (milk, meat, fish, egg and fat) but also related processed ingredients and finished products commonly used and manufactured by food business operators. Due to the complexity of the matrices considered and to efficiently deal with losses during extraction and matrix effects during MS source ionisation, each sample was analysed twice, that is 'unspiked' and 'spiked at the screening target concentration' using a QuEChERS-like extraction. The entire procedure was validated according to the European Community Reference Laboratories Residues Guidelines. False-negative and false-positive rates were below 5% for all veterinary drugs whatever the food matrix. Effectiveness of the procedure was further demonstrated through participation to five proficiency tests and its ruggedness demonstrated in quality control operations by a second laboratory.

Experimental Methods for Trapping Ions Using Microfabricated Surface Ion Traps

PubMed Central

Hong, Seokjun; Lee, Minjae; Kwon, Yeong-Dae; Cho, Dong-il "Dan"; Kim, Taehyun

2017-01-01

Ions trapped in a quadrupole Paul trap have been considered one of the strong physical candidates to implement quantum information processing. This is due to their long coherence time and their capability to manipulate and detect individual quantum bits (qubits). In more recent years, microfabricated surface ion traps have received more attention for large-scale integrated qubit platforms. This paper presents a microfabrication methodology for ion traps using micro-electro-mechanical system (MEMS) technology, including the fabrication method for a 14 µm-thick dielectric layer and metal overhang structures atop the dielectric layer. In addition, an experimental procedure for trapping ytterbium (Yb) ions of isotope 174 (174Yb+) using 369.5 nm, 399 nm, and 935 nm diode lasers is described. These methodologies and procedures involve many scientific and engineering disciplines, and this paper first presents the detailed experimental procedures. The methods discussed in this paper can easily be extended to the trapping of Yb ions of isotope 171 (171Yb+) and to the manipulation of qubits. PMID:28872137

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

Time-Domain Receiver Function Deconvolution using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Moreira, L. P.

2017-12-01

Receiver Functions (RF) are well know method for crust modelling using passive seismological signals. Many different techniques were developed to calculate the RF traces, applying the deconvolution calculation to radial and vertical seismogram components. A popular method used a spectral division of both components, which requires human intervention to apply the Water Level procedure to avoid instabilities from division by small numbers. One of most used method is an iterative procedure to estimate the RF peaks and applying the convolution with vertical component seismogram, comparing the result with the radial component. This method is suitable for automatic processing, however several RF traces are invalid due to peak estimation failure.In this work it is proposed a deconvolution algorithm using Genetic Algorithm (GA) to estimate the RF peaks. This method is entirely processed in the time domain, avoiding the time-to-frequency calculations (and vice-versa), and totally suitable for automatic processing. Estimated peaks can be used to generate RF traces in a seismogram format for visualization. The RF trace quality is similar for high magnitude events, although there are less failures for RF calculation of smaller events, increasing the overall performance for high number of events per station.

Flexible Automation System for Determination of Elemental Composition of Incrustations in Clogged Biliary Endoprostheses Using ICP-MS.

PubMed

Fleischer, Heidi; Ramani, Kinjal; Blitti, Koffi; Roddelkopf, Thomas; Warkentin, Mareike; Behrend, Detlef; Thurow, Kerstin

2018-02-01

Automation systems are well established in industries and life science laboratories, especially in bioscreening and high-throughput applications. An increasing demand of automation solutions can be seen in the field of analytical measurement in chemical synthesis, quality control, and medical and pharmaceutical fields, as well as research and development. In this study, an automation solution was developed and optimized for the investigation of new biliary endoprostheses (stents), which should reduce clogging after implantation in the human body. The material inside the stents (incrustations) has to be controlled regularly and under identical conditions. The elemental composition is one criterion to be monitored in stent development. The manual procedure was transferred to an automated process including sample preparation, elemental analysis using inductively coupled plasma mass spectrometry (ICP-MS), and data evaluation. Due to safety issues, microwave-assisted acid digestion was executed outside of the automation system. The performance of the automated process was determined and validated. The measurement results and the processing times were compared for both the manual and the automated procedure. Finally, real samples of stent incrustations and pig bile were analyzed using the automation system.

Consistent linguistic fuzzy preference relations method with ranking fuzzy numbers

NASA Astrophysics Data System (ADS)

Ridzuan, Siti Amnah Mohd; Mohamad, Daud; Kamis, Nor Hanimah

2014-12-01

Multi-Criteria Decision Making (MCDM) methods have been developed to help decision makers in selecting the best criteria or alternatives from the options given. One of the well known methods in MCDM is the Consistent Fuzzy Preference Relation (CFPR) method, essentially utilizes a pairwise comparison approach. This method was later improved to cater subjectivity in the data by using fuzzy set, known as the Consistent Linguistic Fuzzy Preference Relations (CLFPR). The CLFPR method uses the additive transitivity property in the evaluation of pairwise comparison matrices. However, the calculation involved is lengthy and cumbersome. To overcome this problem, a method of defuzzification was introduced by researchers. Nevertheless, the defuzzification process has a major setback where some information may lose due to the simplification process. In this paper, we propose a method of CLFPR that preserves the fuzzy numbers form throughout the process. In obtaining the desired ordering result, a method of ranking fuzzy numbers is utilized in the procedure. This improved procedure for CLFPR is implemented to a case study to verify its effectiveness. This method is useful for solving decision making problems and can be applied to many areas of applications.

[Standardization and modeling of surgical processes].

PubMed

Strauss, G; Schmitz, P

2016-12-01

Due to the technological developments around the operating room, surgery in the twenty-first century is undergoing a paradigm shift. Which technologies have already been integrated into the surgical routine? How can a favorable cost-benefit balance be achieved by the implementation of new software-based assistance systems? This article presents the state of the art technology as exemplified by a semi-automated operation system for otorhinolaryngology surgery. The main focus is on systems for implementation of digital handbooks and navigational functions in situ. On the basis of continuous development in digital imaging, decisions may by facilitated by individual patient models thus allowing procedures to be optimized. The ongoing digitization and linking of all relevant information enable a high level of standardization in terms of operating procedures. This may be used by assistance systems as a basis for complete documentation and high process reliability. Automation of processes in the operating room results in an increase in quality, precision and standardization so that the effectiveness and efficiency of treatment can be improved; however, care must be taken that detrimental consequences, such as loss of skills and placing too much faith in technology must be avoided by adapted training concepts.

Wavelet-based identification of rotor blades in passage-through-resonance tests

NASA Astrophysics Data System (ADS)

Carassale, Luigi; Marrè-Brunenghi, Michela; Patrone, Stefano

2018-01-01

Turbine blades are critical components in turbo engines and their design process usually includes experimental tests in order to validate and/or update numerical models. These tests are generally carried out on full-scale rotors having some blades instrumented with strain gauges and usually involve a run-up or a run-down phase. The quantification of damping in these conditions is rather challenging for several reasons. In this work, we show through numerical simulations that the usual identification procedures lead to a systematic overestimation of damping due both to the finite sweep velocity, as well as to the variation of the blade natural frequencies with the rotation speed. To overcome these problems, an identification procedure based on the continuous wavelet transform is proposed and validated through numerical simulation.

Cost-Based Optimization of a Papermaking Wastewater Regeneration Recycling System

NASA Astrophysics Data System (ADS)

Huang, Long; Feng, Xiao; Chu, Khim H.

2010-11-01

Wastewater can be regenerated for recycling in an industrial process to reduce freshwater consumption and wastewater discharge. Such an environment friendly approach will also lead to cost savings that accrue due to reduced freshwater usage and wastewater discharge. However, the resulting cost savings are offset to varying degrees by the costs incurred for the regeneration of wastewater for recycling. Therefore, systematic procedures should be used to determine the true economic benefits for any water-using system involving wastewater regeneration recycling. In this paper, a total cost accounting procedure is employed to construct a comprehensive cost model for a paper mill. The resulting cost model is optimized by means of mathematical programming to determine the optimal regeneration flowrate and regeneration efficiency that will yield the minimum total cost.

Automated and unsupervised detection of malarial parasites in microscopic images.

PubMed

Purwar, Yashasvi; Shah, Sirish L; Clarke, Gwen; Almugairi, Areej; Muehlenbachs, Atis

2011-12-13

Malaria is a serious infectious disease. According to the World Health Organization, it is responsible for nearly one million deaths each year. There are various techniques to diagnose malaria of which manual microscopy is considered to be the gold standard. However due to the number of steps required in manual assessment, this diagnostic method is time consuming (leading to late diagnosis) and prone to human error (leading to erroneous diagnosis), even in experienced hands. The focus of this study is to develop a robust, unsupervised and sensitive malaria screening technique with low material cost and one that has an advantage over other techniques in that it minimizes human reliance and is, therefore, more consistent in applying diagnostic criteria. A method based on digital image processing of Giemsa-stained thin smear image is developed to facilitate the diagnostic process. The diagnosis procedure is divided into two parts; enumeration and identification. The image-based method presented here is designed to automate the process of enumeration and identification; with the main advantage being its ability to carry out the diagnosis in an unsupervised manner and yet have high sensitivity and thus reducing cases of false negatives. The image based method is tested over more than 500 images from two independent laboratories. The aim is to distinguish between positive and negative cases of malaria using thin smear blood slide images. Due to the unsupervised nature of method it requires minimal human intervention thus speeding up the whole process of diagnosis. Overall sensitivity to capture cases of malaria is 100% and specificity ranges from 50-88% for all species of malaria parasites. Image based screening method will speed up the whole process of diagnosis and is more advantageous over laboratory procedures that are prone to errors and where pathological expertise is minimal. Further this method provides a consistent and robust way of generating the parasite clearance curves.

Releasing pre-adoption birth records: the impact of Oregon's experience on its vital records department.

PubMed

Barfield, Wanda D; Rhodes, Julia C; Kohn, Melvin A; Hedberg, Katrina; Schoendorf, Kenneth C

2002-01-01

In November 1998, Oregon voters passed Ballot Measure 58, which allowed Oregon adoptees > or = 21 years of age access to their original birth records, which are sealed at adoption. The objective of this study was to evaluate the impact of the measure on the Oregon Health Division (since renamed Oregon Health Services) by assessing procedures used and resources needed after implementation of Measure 58. Vital records employees were interviewed about processing, storage, and archive retrieval procedures for pre-adoption birth records before, during, and after the implementation of Measure 58 and the effect on their usual workload. Personnel time, space, and fiscal resources used to process requests for pre-adoption records were also calculated. The Oregon Health Division began to receive requests from adoptees immediately following the passage of Measure 58 in November 1998, but due to legal challenges, they could not be processed until May 31, 2000. From June 2, 2000, through October 20, 2000, 12 staff members and two supervisors issued more than 4,700 pre-adoption birth records while also processing their normal workload, which averages more than 135,400 vital record orders annually. Due to the need for retrieval from archives, requests for pre-adoption birth records were estimated to take 75 hours to process vs. 2-3 minutes for standard requests. Each batch of approximately 75 pre-adoption birth records required approximately 12.5 person-hours from vital records staff and 3-4 person-hours from archive personnel; in addition, supervisors spent time responding to incomplete orders, informing the public and the media, and responding to concerns of adoptees, birth parents, and adoptive parents. Fewer than 1% of requests went unfilled. Implementation of Measure 58 utilized substantial resources of the Oregon Health Division. States contemplating similar legislation should consider increasing personnel and resources, preparing for intense public and media interest, and reorganizing the storage of adoptees' original birth records so they are easily retrieved.

Advances in postharvest technologies to extend the storage life of minimally processed fruits and vegetables.

PubMed

Ali, Asgar; Yeoh, Wei Keat; Forney, Charles; Siddiqui, Mohammed Wasim

2017-10-26

Minimally processed fresh produce is one of the fastest growing segments of the food industry due to consumer demand for fresh, healthy, and convenient foods. However, mechanical operations of cutting and peeling induce the liberation of cellular contents at the site of wounding that can promote the growth of pathogenic and spoilage microorganisms. In addition, rates of tissue senescence can be enhanced resulting in reduced storage life of fresh-cut fruits and vegetables. Chlorine has been widely adopted in the disinfection and washing procedures of fresh-cut produce due to its low cost and efficacy against a broad spectrum of microorganisms. Continuous replenishment of chlorine in high organic wash water can promote the formation of carcinogenic compounds such as trihalomethanes, which threaten human and environmental health. Alternative green and innovative chemical and physical postharvest treatments such as ozone, electrolyzed water, hydrogen peroxide, ultraviolet radiation, high pressure processing, and ultrasound can achieve similar reduction of microorganisms as chlorine without the production of harmful compounds or compromising the quality of fresh-cut produce.

A new method using Scanning Electron Microscopy (SEM) for preparation of anisopterous odonates.

PubMed

Del Palacio, Alejandro; Sarmiento, Patricia Laura; Javier, Muzón

2017-10-01

Anisopterous odonate male's secondary genitalia is a complex of several structures, among them the vesica spermalis is the most informative with important specific characters. The observation of those characters, mostly of membranous nature, is difficult in the Scanning Electron Microscope due to dehydration and metallization processes. In this contribution, we discuss a new and low cost procedure for the observation of these characters in the SEM, compatible with the most common agents used for preserving specimens. © 2017 Wiley Periodicals, Inc.

Horizon sensor errors calculated by computer models compared with errors measured in orbit

NASA Technical Reports Server (NTRS)

Ward, K. A.; Hogan, R.; Andary, J.

1982-01-01

Using a computer program to model the earth's horizon and to duplicate the signal processing procedure employed by the ESA (Earth Sensor Assembly), errors due to radiance variation have been computed for a particular time of the year. Errors actually occurring in flight at the same time of year are inferred from integrated rate gyro data for a satellite of the TIROS series of NASA weather satellites (NOAA-A). The predicted performance is compared with actual flight history.

FINAL REPORT: Transformational electrode drying process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Claus Daniel, C.; Wixom, M.

2013-12-19

This report includes major findings and outlook from the transformational electrode drying project performance period from January 6, 2012 to August 1, 2012. Electrode drying before cell assembly is an operational bottleneck in battery manufacturing due to long drying times and batch processing. Water taken up during shipment and other manufacturing steps needs to be removed before final battery assembly. Conventional vacuum ovens are limited in drying speed due to a temperature threshold needed to avoid damaging polymer components in the composite electrode. Roll to roll operation and alternative treatments can increase the water desorption and removal rate without overheatingmore » and damaging other components in the composite electrode, thus considerably reducing drying time and energy use. The objective of this project was the development of an electrode drying procedure, and the demonstration of processes with no decrease in battery performance. The benchmark for all drying data was an 80°C vacuum furnace treatment with a residence time of 18 – 22 hours. This report demonstrates an alternative roll to roll drying process with a 500-fold improvement in drying time down to 2 minutes and consumption of only 30% of the energy compared to vacuum furnace treatment.« less

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., data and information resources, training, and periodic evaluation enable a systematic approach for... management procedures. States should develop and implement systematic procedures to assess work zone impacts... practices and State processes and procedures. (e) Process review. In order to assess the effectiveness of...

Development of Facial Rejuvenation Procedures: Thirty Years of Clinical Experience with Face Lifts

PubMed Central

Kim, Byung Jun; Choi, Jun Ho

2015-01-01

Facial rejuvenation procedures can be roughly divided into face lift surgery and nonoperative, less invasive procedures, such as fat grafts, fillers, botulinum toxin injections, thread lifts, or laserbrasion. Face lift surgery or rhytidectomy is the procedure most directly associated with rejuvenation, due to its fundamental ability to restore the anatomical changes caused by aging. Various methods of face lift surgery have been developed over the last hundred years, thanks to advances in the understanding of facial anatomy and the mechanisms of aging, as well as the dedication of innovative surgeons. However, no generally applicable standard method exists, because the condition of each patient is different, and each operative method has advantages and disadvantages. Specific characteristics of the skin of Asians and their skeletal anatomy should be considered when determining the operative method to be used on Asian patients. Plastic surgeons should improve their ability to analyze the original aesthetic properties and problem areas of each patient, drawing on scientific knowledge about the aging process, and they should develop the skills necessary to perform various rejuvenative techniques. In the present article, we reviewed various face lift procedures and the current methods of modified double plane face lift, based on our clinical experience of over 30 years. PMID:26430622

A laboratory procedure for measuring and georeferencing soil colour

NASA Astrophysics Data System (ADS)

Marques-Mateu, A.; Balaguer-Puig, M.; Moreno-Ramon, H.; Ibanez-Asensio, S.

2015-04-01

Remote sensing and geospatial applications very often require ground truth data to assess outcomes from spatial analyses or environmental models. Those data sets, however, may be difficult to collect in proper format or may even be unavailable. In the particular case of soil colour the collection of reliable ground data can be cumbersome due to measuring methods, colour communication issues, and other practical factors which lead to a lack of standard procedure for soil colour measurement and georeferencing. In this paper we present a laboratory procedure that provides colour coordinates of georeferenced soil samples which become useful in later processing stages of soil mapping and classification from digital images. The procedure requires a laboratory setup consisting of a light booth and a trichromatic colorimeter, together with a computer program that performs colour measurement, storage, and colour space transformation tasks. Measurement tasks are automated by means of specific data logging routines which allow storing recorded colour data in a spatial format. A key feature of the system is the ability of transforming between physically-based colour spaces and the Munsell system which is still the standard in soil science. The working scheme pursues the automation of routine tasks whenever possible and the avoidance of input mistakes by means of a convenient layout of the user interface. The program can readily manage colour and coordinate data sets which eventually allow creating spatial data sets. All the tasks regarding data joining between colorimeter measurements and samples locations are executed by the software in the background, allowing users to concentrate on samples processing. As a result, we obtained a robust and fully functional computer-based procedure which has proven a very useful tool for sample classification or cataloging purposes as well as for integrating soil colour data with other remote sensed and spatial data sets.

Self-Calibrated In-Process Photogrammetry for Large Raw Part Measurement and Alignment before Machining

PubMed Central

Mendikute, Alberto; Zatarain, Mikel; Bertelsen, Álvaro; Leizea, Ibai

2017-01-01

Photogrammetry methods are being used more and more as a 3D technique for large scale metrology applications in industry. Optical targets are placed on an object and images are taken around it, where measuring traceability is provided by precise off-process pre-calibrated digital cameras and scale bars. According to the 2D target image coordinates, target 3D coordinates and camera views are jointly computed. One of the applications of photogrammetry is the measurement of raw part surfaces prior to its machining. For this application, post-process bundle adjustment has usually been adopted for computing the 3D scene. With that approach, a high computation time is observed, leading in practice to time consuming and user dependent iterative review and re-processing procedures until an adequate set of images is taken, limiting its potential for fast, easy-to-use, and precise measurements. In this paper, a new efficient procedure is presented for solving the bundle adjustment problem in portable photogrammetry. In-process bundle computing capability is demonstrated on a consumer grade desktop PC, enabling quasi real time 2D image and 3D scene computing. Additionally, a method for the self-calibration of camera and lens distortion has been integrated into the in-process approach due to its potential for highest precision when using low cost non-specialized digital cameras. Measurement traceability is set only by scale bars available in the measuring scene, avoiding the uncertainty contribution of off-process camera calibration procedures or the use of special purpose calibration artifacts. The developed self-calibrated in-process photogrammetry has been evaluated both in a pilot case scenario and in industrial scenarios for raw part measurement, showing a total in-process computing time typically below 1 s per image up to a maximum of 2 s during the last stages of the computed industrial scenes, along with a relative precision of 1/10,000 (e.g., 0.1 mm error in 1 m) with an error RMS below 0.2 pixels at image plane, ranging at the same performance reported for portable photogrammetry with precise off-process pre-calibrated cameras. PMID:28891946

Self-Calibrated In-Process Photogrammetry for Large Raw Part Measurement and Alignment before Machining.

PubMed

Mendikute, Alberto; Yagüe-Fabra, José A; Zatarain, Mikel; Bertelsen, Álvaro; Leizea, Ibai

2017-09-09

Photogrammetry methods are being used more and more as a 3D technique for large scale metrology applications in industry. Optical targets are placed on an object and images are taken around it, where measuring traceability is provided by precise off-process pre-calibrated digital cameras and scale bars. According to the 2D target image coordinates, target 3D coordinates and camera views are jointly computed. One of the applications of photogrammetry is the measurement of raw part surfaces prior to its machining. For this application, post-process bundle adjustment has usually been adopted for computing the 3D scene. With that approach, a high computation time is observed, leading in practice to time consuming and user dependent iterative review and re-processing procedures until an adequate set of images is taken, limiting its potential for fast, easy-to-use, and precise measurements. In this paper, a new efficient procedure is presented for solving the bundle adjustment problem in portable photogrammetry. In-process bundle computing capability is demonstrated on a consumer grade desktop PC, enabling quasi real time 2D image and 3D scene computing. Additionally, a method for the self-calibration of camera and lens distortion has been integrated into the in-process approach due to its potential for highest precision when using low cost non-specialized digital cameras. Measurement traceability is set only by scale bars available in the measuring scene, avoiding the uncertainty contribution of off-process camera calibration procedures or the use of special purpose calibration artifacts. The developed self-calibrated in-process photogrammetry has been evaluated both in a pilot case scenario and in industrial scenarios for raw part measurement, showing a total in-process computing time typically below 1 s per image up to a maximum of 2 s during the last stages of the computed industrial scenes, along with a relative precision of 1/10,000 (e.g. 0.1 mm error in 1 m) with an error RMS below 0.2 pixels at image plane, ranging at the same performance reported for portable photogrammetry with precise off-process pre-calibrated cameras.

Operational Data Reduction Procedure for Determining Density and Vertical Structure of the Martian Upper Atmosphere from Mars Global Surveyor Accelerometer Measurements

NASA Technical Reports Server (NTRS)

Cancro, George J.; Tolson, Robert H.; Keating, Gerald M.

1998-01-01

The success of aerobraking by the Mars Global Surveyor (MGS) spacecraft was partly due to the analysis of MGS accelerometer data. Accelerometer data was used to determine the effect of the atmosphere on each orbit, to characterize the nature of the atmosphere, and to predict the atmosphere for future orbits. To interpret the accelerometer data, a data reduction procedure was developed to produce density estimations utilizing inputs from the spacecraft, the Navigation Team, and pre-mission aerothermodynamic studies. This data reduction procedure was based on the calculation of aerodynamic forces from the accelerometer data by considering acceleration due to gravity gradient, solar pressure, angular motion of the MGS, instrument bias, thruster activity, and a vibration component due to the motion of the damaged solar array. Methods were developed to calculate all of the acceleration components including a 4 degree of freedom dynamics model used to gain a greater understanding of the damaged solar array. The total error inherent to the data reduction procedure was calculated as a function of altitude and density considering contributions from ephemeris errors, errors in force coefficient, and instrument errors due to bias and digitization. Comparing the results from this procedure to the data of other MGS Teams has demonstrated that this procedure can quickly and accurately describe the density and vertical structure of the Martian upper atmosphere.

Bone augmentation of the osteo-odonto alveolar lamina in MOOKP--will it delay laminar resorption?

PubMed

Iyer, Geetha; Srinivasan, Bhaskar; Agarwal, Shweta; Rishi, Ekta; Rishi, Pukhraj; Rajan, Gunaseelan; Shanmugasundaram, Shanmugasundaram

2015-07-01

We aimed to describe a new technique and analyse the early outcomes of augmenting the canine tooth using a mandibular bone graft in an attempt to delay or retard the process of laminar resorption following the modified osteo odonto keratoprosthesis (MOOKP) procedure. This was a retrospective case series. Eyes that underwent the bone augmentation procedure between December 2012 and February 2014 were retrospectively analysed. The procedure, performed by the oromaxillofacial surgeon, involved securing a mandibular bone graft beneath the periosteum on the labial aspect of the canine tooth chosen to be harvested for the MOOKP procedure. This procedure was performed simultaneously with the Stage 1 A of the MOOKP. Three months later, the tooth was harvested and fashioned into the osteo-odonto alveolar lamina similar to the method described in the Rome-Vienna Protocol. The bone augmentation procedure was performed in 11 eyes (five SJS/ six chemical injuries). The mean follow-up after Stage 2 of MOOKP procedure in these eyes was 7.45 months (2 to 20 months). Complications noted were peripheral laminar exposure (three eyes-SJS) and bone graft exposure and necrosis in the mouth (nine-SJS). No evidence of clinical laminar resorption was noted in any of the eyes. Laminar resorption in MOOKP can lead to vision and globe threatening complications due to the consequent cylinder instability and chances of extrusion. Augmenting the bone on the labial aspect of the canine tooth might have a role to play in delaying or preventing laminar resorption.

23 CFR 200.11 - Procedures for processing Title VI reviews.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Procedures for processing Title VI reviews. 200.11 Section 200.11 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CIVIL RIGHTS TITLE VI PROGRAM AND RELATED STATUTES-IMPLEMENTATION AND REVIEW PROCEDURES § 200.11 Procedures for processing Title...

23 CFR 200.11 - Procedures for processing Title VI reviews.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Procedures for processing Title VI reviews. 200.11 Section 200.11 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CIVIL RIGHTS TITLE VI PROGRAM AND RELATED STATUTES-IMPLEMENTATION AND REVIEW PROCEDURES § 200.11 Procedures for processing Title...

23 CFR 200.11 - Procedures for processing Title VI reviews.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Procedures for processing Title VI reviews. 200.11 Section 200.11 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CIVIL RIGHTS TITLE VI PROGRAM AND RELATED STATUTES-IMPLEMENTATION AND REVIEW PROCEDURES § 200.11 Procedures for processing Title...

23 CFR 200.11 - Procedures for processing Title VI reviews.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Procedures for processing Title VI reviews. 200.11 Section 200.11 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CIVIL RIGHTS TITLE VI PROGRAM AND RELATED STATUTES-IMPLEMENTATION AND REVIEW PROCEDURES § 200.11 Procedures for processing Title...

76 FR 26579 - Procedures for Submitting to the Department of Energy Trade Secrets and Commercial or Financial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... procedures DOE uses to process loan applications submitted to DOE's Advanced Technology Vehicles... information. The procedures are modeled after existing procedures DOE uses to process loan applications... requirements as described above for any information submitted through the Title XVII loan application process...

Estimating lake susceptibility to acidification due to acid deposition.

Treesearch

Dale S. Nichols

1990-01-01

Presents a graphical procedure for evaluating the same sensitivity of lakes to acidification due to acid deposition. The procedure is based on empirical relationships between sulfur (and in some cases nitrogen) deposition rates and lake pH, acid-neutralizing capacity, base cation concentrations, and the amount of runoff.

A Guide for Developing Standard Operating Job Procedures for the Pump Station Process Wastewater Treatment Facility. SOJP No. 3.

ERIC Educational Resources Information Center

Perley, Gordon F.

This is a guide for standard operating job procedures for the pump station process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up procedures, continuous routine operation procedures, and shut-down procedures. A general description of the equipment used in the process is given. Two…

Spontaneous prospective-memory processing: Unexpected fluency experiences trigger erroneous intention executions.

PubMed

Rummel, Jan; Meiser, Thorsten

2016-01-01

Event-based prospective memory is the ability to remember to execute an intention when an environmental cue occurs. It has been argued that, due to their special meaning, these cues are discrepant from their environment and therefore are sometimes spontaneously noticed. In line with this assumption, the likelihood that an intention will be executed increases with increased cue-discrepancy. It is not yet clear, however, whether these improvements are due to facilitated spontaneous noticing rather than to an increase in the efficiency of controlled cue-processing. To further investigate the spontaneous nature of cue-discrepancy benefits, we presented participants with stimuli that were unrelated to the intention but discrepant from other stimuli. Therefore, we experimentally increased the processing fluency of some stimuli for participants currently holding an intention by using different priming procedures. We found that stimuli whose fluency was increased via spaced repeated stimulus presentation (Experiment 1) or via short pre-exposure (Experiment 2a to 3) elicited a tendency to fulfill the intention despite its actual inappropriateness. Findings were inconsistent as to whether cue-memory uncertainty fosters the reliance on cue discrepancy for intention retrieval (Experiments 2a and 3). Taken together, the present findings provide converging evidence for a spontaneous discrepancy-based prospective-memory process which works independent of controlled processes.

Operational Control Procedures for the Activated Sludge Process, Part III-B: Calculation Procedures for Step-Feed Process Responses and Addendum No. 1.

ERIC Educational Resources Information Center

West, Alfred W.

This is the third in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals with the calculation procedures associated with a step-feed process. Illustrations and examples are included to…

[Subcutaneous phaeohyphomycose due to Exophiala jeanselmir. Report of 3 cases in patients with a kidney transplant].

PubMed

Sabbaga, E; Tedesco-Marchesi, L M; Lacaz, C da S; Cucé, L C; Salebian, A; Heins-Vaccari, E M; Sotto, M N; Valente, N Y; Porto, E; Levy Neto, M

1994-01-01

We report three cases of subcutaneous phaeohyphomycosis due to Exophiala jeanselmei (Langeron) McGinnis et Padhye 1977, in kidney transplant patients. Exophiala jeanselmei is a dematious fungus having also ability to rarely procedure eumycetoma (black grains). According to KWON-CHUNG & BENNETT (1992) such fungus is antigenically very heterogeneous, since so far three serotypes have been identified; each serotype including subgroups. Subcutaneous phaeohyphomycosis is becoming more and more frequent in kidney transplant patients submitted to an immunosuppressive treatment. As Exophiala jeanselmei has already been isolated from the environment it becomes difficult to explain the pathogenicity of these cases by a reactivation of quiescent processes. The authors suggest an occasional fungistatic action of cyclosporine A upon Exophiala jeanselmei.

Soft-solution route to ZnO nanowall array with low threshold power density

NASA Astrophysics Data System (ADS)

Jang, Eue-Soon; Chen, Xiaoyuan; Won, Jung-Hee; Chung, Jae-Hun; Jang, Du-Jeon; Kim, Young-Woon; Choy, Jin-Ho

2010-07-01

ZnO nanowall array (ZNWA) has been directionally grown on the buffer layer of ZnO nanoparticles dip-coated on Si-wafer under a soft solution process. Nanowalls on substrate are in most suitable shape and orientation not only as an optical trap but also as an optical waveguide due to their unique growth habit, V[011¯0]≫V[0001]≈V[0001¯]. Consequently, the stimulated emission at 384 nm through nanowalls is generated by the threshold power density of only 25 kW/cm2. Such UV lasing properties are superior to those of previously reported ZnO nanorod arrays. Moreover, there is no green (defect) emission due to the mild procedure to synthesize ZNWA.

Planning treatment of ischemic heart disease with partially observable Markov decision processes.

PubMed

Hauskrecht, M; Fraser, H

2000-03-01

Diagnosis of a disease and its treatment are not separate, one-shot activities. Instead, they are very often dependent and interleaved over time. This is mostly due to uncertainty about the underlying disease, uncertainty associated with the response of a patient to the treatment and varying cost of different diagnostic (investigative) and treatment procedures. The framework of partially observable Markov decision processes (POMDPs) developed and used in the operations research, control theory and artificial intelligence communities is particularly suitable for modeling such a complex decision process. In this paper, we show how the POMDP framework can be used to model and solve the problem of the management of patients with ischemic heart disease (IHD), and demonstrate the modeling advantages of the framework over standard decision formalisms.

Qualification of a rapid readout biological indicator with moist heat sterilization.

PubMed

McCormick, Patrick; Finocchario, Catherine; Manchester, Robert; Glasgow, Louis; Costanzo, Stephen

2003-01-01

Biological indicators are recognized as an important component in the validation and routine monitoring of moist heat (steam) sterilization processes. Due to the need to allow for the recovery and outgrowth of test organisms that may have been sub-lethally injured, between 2-5 days of incubation are typically required before the outcome of sterilization processing can be reliably interpreted. Rapid readout biological indicators that incorporate the response of a heat resistant enzyme provide a means for assessing the efficacy of moist heat sterilization within hours of processing. This study describes the qualification of the 3M Attest 1292 Rapid Readout Biological Indicator with moist heat sterilization according to the procedures described in the PDA Technical Report No. 33, "Evaluation, Validation and Implementation of New Microbiological Testing Methods".

Two-dimensional signal processing with application to image restoration

NASA Technical Reports Server (NTRS)

Assefi, T.

1974-01-01

A recursive technique for modeling and estimating a two-dimensional signal contaminated by noise is presented. A two-dimensional signal is assumed to be an undistorted picture, where the noise introduces the distortion. Both the signal and the noise are assumed to be wide-sense stationary processes with known statistics. Thus, to estimate the two-dimensional signal is to enhance the picture. The picture representing the two-dimensional signal is converted to one dimension by scanning the image horizontally one line at a time. The scanner output becomes a nonstationary random process due to the periodic nature of the scanner operation. Procedures to obtain a dynamical model corresponding to the autocorrelation function of the scanner output are derived. Utilizing the model, a discrete Kalman estimator is designed to enhance the image.

Rapid microfluidic analysis of a Y-STR multiplex for screening of forensic samples.

PubMed

Gibson-Daw, Georgiana; Albani, Patricia; Gassmann, Marcus; McCord, Bruce

2017-02-01

In this paper, we demonstrate a rapid analysis procedure for use with a small set of rapidly mutating Y chromosomal short tandem repeat (Y-STR) loci that combines both rapid polymerase chain reaction (PCR) and microfluidic separation elements. The procedure involves a high-speed polymerase and a rapid cycling protocol to permit PCR amplification in 16 min. The resultant amplified sample is next analysed using a short 1.8-cm microfluidic electrophoresis system that permits a four-locus Y-STR genotype to be produced in 80 s. The entire procedure takes less than 25 min from sample collection to result. This paper describes the rapid amplification protocol as well as studies of the reproducibility and sensitivity of the procedure and its optimisation. The amplification process utilises a small high-speed thermocycler, microfluidic device and compact laptop, making it portable and potentially useful for rapid, inexpensive on-site genotyping. The four loci used for the multiplex were selected due to their rapid mutation rates and should proved useful in preliminary screening of samples and suspects. Overall, this technique provides a method for rapid sample screening of suspect and crime scene samples in forensic casework. Graphical abstract ᅟ.

43 CFR 4.828 - Use of depositions at hearing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... APPEALS PROCEDURES Special Procedural Rules Applicable to Practice and Procedure for Hearings, Decisions... make it desirable, in the interest of justice and with due regard to the importance of presenting the...

43 CFR 4.828 - Use of depositions at hearing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... APPEALS PROCEDURES Special Procedural Rules Applicable to Practice and Procedure for Hearings, Decisions... make it desirable, in the interest of justice and with due regard to the importance of presenting the...

32 CFR 1806.3 - Procedures governing acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COUNTERINTELLIGENCE CENTER PROCEDURES GOVERNING ACCEPTANCE OF SERVICE OF PROCESS § 1806.3 Procedures governing acceptance of service of process. (a) Service of Process Upon the NACIC or a NACIC Employee in an Official..., personal service of process may be accepted only by NACIC Counsel, Director, NACIC, or Deputy Director...

Ethical case deliberation and decision making.

PubMed

Gracia, Diego

2003-01-01

During the last thirty years different methods have been proposed in order to manage and resolve ethical quandaries, specially in the clinical setting. Some of these methodologies are based on the principles of Decision-making theory. Others looked to other philosophical traditions, like Principlism, Hermeneutics, Narrativism, Casuistry, Pragmatism, etc. This paper defends the view that deliberation is the cornerstone of any adequate methodology. This is due to the fact that moral decisions must take into account not only principles and ideas, but also emotions, values and beliefs. Deliberation is the process in which everyone concerned by the decision is considered a valid moral agent, obliged to give reasons for their own points of view, and to listen to the reasons of others. The goal of this process is not the reaching of a consensus but the enrichment of one's own point of view with that of the others, increasing in this way the maturity of one's own decision, in order to make it more wise or prudent. In many cases the members of a group of deliberation will differ in the final solution of the case, but the confrontation of their reasons will modify the perception of the problem of everyone. This is the profit of the process. Our moral decisions cannot be completely rational, due to the fact that they are influenced by feelings, values, beliefs, etc., but they must be reasonable, that is, wise and prudent. Deliberation is the main procedure to reach this goal. It obliges us to take others into account, respecting their different beliefs and values and prompting them to give reasons for their own points of view. This method has been traditional in Western clinical medicine all over its history, and it should be also the main procedure for clinical ethics.

Multicriterion problem of allocation of resources in the heterogeneous distributed information processing systems

NASA Astrophysics Data System (ADS)

Antamoshkin, O. A.; Kilochitskaya, T. R.; Ontuzheva, G. A.; Stupina, A. A.; Tynchenko, V. S.

2018-05-01

This study reviews the problem of allocation of resources in the heterogeneous distributed information processing systems, which may be formalized in the form of a multicriterion multi-index problem with the linear constraints of the transport type. The algorithms for solution of this problem suggest a search for the entire set of Pareto-optimal solutions. For some classes of hierarchical systems, it is possible to significantly speed up the procedure of verification of a system of linear algebraic inequalities for consistency due to the reducibility of them to the stream models or the application of other solution schemes (for strongly connected structures) that take into account the specifics of the hierarchies under consideration.

KSC-05pd2600

NASA Image and Video Library

2005-12-14

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman applies the glue (red) known as RTV, or room temperature vulcanization, to a strip of gap filler before installation on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence.

If Unprofessional Conduct Is Charged by the California Board of Medical Quality Assurance

PubMed Central

Regardie, Arnold G.

1977-01-01

The right of a physician to practice his or her chosen profession must be balanced against the right of the public to be protected from unprofessional conduct by physicians. By providing notice and a hearing before imposing discipline, if any, on a physician for unprofessional conduct, the California Board of Medical Quality Assurance meets the basic requirements of procedural due process. However, although the constitutional rights of the physician may be protected in this way, the administrative disciplinary process itself is likely to be an arduous experience. A basic understanding of the nature and legal effect of such disciplinary proceedings may assist a physician in defending against the charges. PMID:919549

KSC-05pd2603

NASA Image and Video Library

2005-12-14

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman applies tape to hold the gap filler in place on the orbiter Discovery while the glue dries. Looking on is quality inspector Travis Schlingman. Discovery is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence.

32 CFR 513.2 - Administrative procedures for processing complaints.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 3 2011-07-01 2009-07-01 true Administrative procedures for processing... procedures for processing complaints. (a) Commander's actions. Upon receipt of a debt complaint, the... believed the creditor's debt processing privileges should be revoked, include a recommendation stating the...

32 CFR 513.2 - Administrative procedures for processing complaints.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 3 2012-07-01 2009-07-01 true Administrative procedures for processing... procedures for processing complaints. (a) Commander's actions. Upon receipt of a debt complaint, the... believed the creditor's debt processing privileges should be revoked, include a recommendation stating the...

32 CFR 513.2 - Administrative procedures for processing complaints.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 3 2013-07-01 2013-07-01 false Administrative procedures for processing... procedures for processing complaints. (a) Commander's actions. Upon receipt of a debt complaint, the... believed the creditor's debt processing privileges should be revoked, include a recommendation stating the...

Optimizing The DSSC Fabrication Process Using Lean Six Sigma

NASA Astrophysics Data System (ADS)

Fauss, Brian

Alternative energy technologies must become more cost effective to achieve grid parity with fossil fuels. Dye sensitized solar cells (DSSCs) are an innovative third generation photovoltaic technology, which is demonstrating tremendous potential to become a revolutionary technology due to recent breakthroughs in cost of fabrication. The study here focused on quality improvement measures undertaken to improve fabrication of DSSCs and enhance process efficiency and effectiveness. Several quality improvement methods were implemented to optimize the seven step individual DSSC fabrication processes. Lean Manufacturing's 5S method successfully increased efficiency in all of the processes. Six Sigma's DMAIC methodology was used to identify and eliminate each of the root causes of defects in the critical titanium dioxide deposition process. These optimizations resulted with the following significant improvements in the production process: 1. fabrication time of the DSSCs was reduced by 54 %; 2. fabrication procedures were improved to the extent that all critical defects in the process were eliminated; 3. the quantity of functioning DSSCs fabricated was increased from 17 % to 90 %.

Enhanced Versus Conventional Sludge Anaerobic Processes: Performances and Techno-Economic Assessment.

PubMed

Gianico, Andrea; Bertanza, Giorgio; Braguglia, Camilla M; Canato, Matteo; Gallipoli, Agata; Laera, Giuseppe; Levantesi, Caterina; Mininni, Giuseppe

2016-05-01

Sewage sludge processing is a key issue in water resource recovery facilities due to the inefficacy of conventional treatments to produce high quality biosolids to be safely used in agriculture. Under this framework, the performances of several enhanced stabilization processes, namely ultrasound-pretreated Mesophilic Anaerobic Digestion (US+MAD), thermophilic anaerobic digestion (TAD), thermal-pretreated TAD (TH+TAD) and ultrasound-pretreated inverse Temperature Phased Anaerobic Digestion (US+iTPAD) have been investigated. Such enhanced processes resulted in higher biogas yields and higher destruction of pathogens with respect to conventional MAD process, thus suggesting their feasibility in full-scale implementation perspectives. A procedure for technical-economic comparison of new sludge processing lines against conventional ones (benchmarking) was developed, based on the definition of technical issues (e.g. reliability, complexity, etc.) which are rated for each situation. Moreover, capital and operating costs were estimated. The enhanced processes analyzed in this work showed some potentially critical items, mainly related to energy balance and reagent consumption.

Cigarette smokers show steeper discounting of both food and cigarettes than money.

PubMed

Odum, Amy L; Baumann, Ana A L

2007-12-01

People with drug addiction show steeper discounting of drugs of abuse than money. One suggestion is that this effect is related to withdrawal processes in drug dependence. We investigated whether it could be related to the fact that drugs are directly consumable, whereas money is not. We determined whether regular cigarette smokers discount food (another consumable outcome) less steeply than cigarettes, both of which were predicted to be discounted more steeply than money. Cigarette smokers (N=20) indicated preferences for immediate and delayed outcomes in a titration procedure that determined indifference points at various delays. In three separate conditions, the choices involved food, cigarettes, or money. The value of the delayed option was always US$ 10 or US$ 10 worth of the outcome. Cigarette smokers discounted both cigarettes and food more steeply than money. Most importantly, cigarettes and food were discounted to a similar degree. Cigarettes may be steeply discounted in part due to their consumable nature, rather than solely due to withdrawal-related processes.

Ethnic and Gender Considerations in the Use of Facial Injectables: Asian Patients.

PubMed

Liew, Steven

2015-11-01

Asians have distinct facial characteristics due to underlying skeletal and morphological features that differ greatly with those of whites. This together with the higher sun protection factor and the differences in the quality of the skin and soft tissue create a profound effect on their aging process. Understanding of these differences and their effects in the aging process in Asians is crucial in determining effective utilization and placement of injectable products to ensure optimal aesthetic outcomes. For younger Asian women, the main treatment goal is to address the inherent structural deficits through reshaping and the provision of facial support. Facial injectables are used to provide anterior projection, to reduce facial width, and to lengthen facial height. In the older group, the aim is for rejuvenation and also to address the underlying structural issues that has compounded due to age-related volume loss. Asian women requesting cosmetic procedures do not want to be Westernized but rather seeking to enhance and optimize their Asian ethnic features.

Numerical and Experimental Investigations of Humping Phenomena in Laser Micro Welding

NASA Astrophysics Data System (ADS)

Otto, Andreas; Patschger, Andreas; Seiler, Michael

The Humping effect is a phenomenon which is observed approximately since 50 years in various welding procedures and is characterized by droplets due to a pile-up of the melt pool. It occurs within a broad range of process parameters. Particularly during micro welding, humping effect is critical due to typically high feed rates. In the past, essentially two approaches (fluid-dynamic approach of streaming melt within the molten pool and the Plateau-Rayleigh instability of a liquid jet) were discussed in order to explain the occurrence of the humping effect. But none of both can fully explain all observed effects. For this reason, experimental studies in micro welding of thin metal foils were performed in order to determine the influence of process parameters on the occurrence of humping effects. The experimental observations were compared with results from numerical multi-physical simulations (incorporating beam propagation, incoupling, heat transfer, fluid dynamics etc.) to provide a deeper understanding of the causes for hump formation.

Computerized procedures system

DOEpatents

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Measuring automatic retrieval: a comparison of implicit memory, process dissociation, and speeded response procedures.

PubMed

Horton, Keith D; Wilson, Daryl E; Vonk, Jennifer; Kirby, Sarah L; Nielsen, Tina

2005-07-01

Using the stem completion task, we compared estimates of automatic retrieval from an implicit memory task, the process dissociation procedure, and the speeded response procedure. Two standard manipulations were employed. In Experiment 1, a depth of processing effect was found on automatic retrieval using the speeded response procedure although this effect was substantially reduced in Experiment 2 when lexical processing was required of all words. In Experiment 3, the speeded response procedure showed an advantage of full versus divided attention at study on automatic retrieval. An implicit condition showed parallel effects in each study, suggesting that implicit stem completion may normally provide a good estimate of automatic retrieval. Also, we replicated earlier findings from the process dissociation procedure, but estimates of automatic retrieval from this procedure were consistently lower than those from the speeded response procedure, except when conscious retrieval was relatively low. We discuss several factors that may contribute to the conflicting outcomes, including the evidence for theoretical assumptions and criterial task differences between implicit and explicit tests.

Hierarchical nonlinear behavior of hot composite structures

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Chamis, C. C.; Singhal, S. N.

1993-01-01

Hierarchical computational procedures are described to simulate the multiple scale thermal/mechanical behavior of high temperature metal matrix composites (HT-MMC) in the following three broad areas: (1) behavior of HT-MMC's from micromechanics to laminate via METCAN (Metal Matrix Composite Analyzer), (2) tailoring of HT-MMC behavior for optimum specific performance via MMLT (Metal Matrix Laminate Tailoring), and (3) HT-MMC structural response for hot structural components via HITCAN (High Temperature Composite Analyzer). Representative results from each area are presented to illustrate the effectiveness of computational simulation procedures and accompanying computer codes. The sample case results show that METCAN can be used to simulate material behavior such as the entire creep span; MMLT can be used to concurrently tailor the fabrication process and the interphase layer for optimum performance such as minimum residual stresses; and HITCAN can be used to predict the structural behavior such as the deformed shape due to component fabrication. These codes constitute virtual portable desk-top test laboratories for characterizing HT-MMC laminates, tailoring the fabrication process, and qualifying structural components made from them.

Evaluation of grid generation technologies from an applied perspective

NASA Technical Reports Server (NTRS)

Hufford, Gary S.; Harrand, Vincent J.; Patel, Bhavin C.; Mitchell, Curtis R.

1995-01-01

An analysis of the grid generation process from the point of view of an applied CFD engineer is given. Issues addressed include geometric modeling, structured grid generation, unstructured grid generation, hybrid grid generation and use of virtual parts libraries in large parametric analysis projects. The analysis is geared towards comparing the effective turn around time for specific grid generation and CFD projects. The conclusion was made that a single grid generation methodology is not universally suited for all CFD applications due to both limitations in grid generation and flow solver technology. A new geometric modeling and grid generation tool, CFD-GEOM, is introduced to effectively integrate the geometric modeling process to the various grid generation methodologies including structured, unstructured, and hybrid procedures. The full integration of the geometric modeling and grid generation allows implementation of extremely efficient updating procedures, a necessary requirement for large parametric analysis projects. The concept of using virtual parts libraries in conjunction with hybrid grids for large parametric analysis projects is also introduced to improve the efficiency of the applied CFD engineer.

IT-benchmarking of clinical workflows: concept, implementation, and evaluation.

PubMed

Thye, Johannes; Straede, Matthias-Christopher; Liebe, Jan-David; Hübner, Ursula

2014-01-01

Due to the emerging evidence of health IT as opportunity and risk for clinical workflows, health IT must undergo a continuous measurement of its efficacy and efficiency. IT-benchmarks are a proven means for providing this information. The aim of this study was to enhance the methodology of an existing benchmarking procedure by including, in particular, new indicators of clinical workflows and by proposing new types of visualisation. Drawing on the concept of information logistics, we propose four workflow descriptors that were applied to four clinical processes. General and specific indicators were derived from these descriptors and processes. 199 chief information officers (CIOs) took part in the benchmarking. These hospitals were assigned to reference groups of a similar size and ownership from a total of 259 hospitals. Stepwise and comprehensive feedback was given to the CIOs. Most participants who evaluated the benchmark rated the procedure as very good, good, or rather good (98.4%). Benchmark information was used by CIOs for getting a general overview, advancing IT, preparing negotiations with board members, and arguing for a new IT project.

A Highly Flexible, Automated System Providing Reliable Sample Preparation in Element- and Structure-Specific Measurements.

PubMed

Vorberg, Ellen; Fleischer, Heidi; Junginger, Steffen; Liu, Hui; Stoll, Norbert; Thurow, Kerstin

2016-10-01

Life science areas require specific sample pretreatment to increase the concentration of the analytes and/or to convert the analytes into an appropriate form for the detection and separation systems. Various workstations are commercially available, allowing for automated biological sample pretreatment. Nevertheless, due to the required temperature, pressure, and volume conditions in typical element and structure-specific measurements, automated platforms are not suitable for analytical processes. Thus, the purpose of the presented investigation was the design, realization, and evaluation of an automated system ensuring high-precision sample preparation for a variety of analytical measurements. The developed system has to enable system adaption and high performance flexibility. Furthermore, the system has to be capable of dealing with the wide range of required vessels simultaneously, allowing for less cost and time-consuming process steps. However, the system's functionality has been confirmed in various validation sequences. Using element-specific measurements, the automated system was up to 25% more precise compared to the manual procedure and as precise as the manual procedure using structure-specific measurements. © 2015 Society for Laboratory Automation and Screening.

Real-time dynamics and control strategies for space operations of flexible structures

NASA Technical Reports Server (NTRS)

Park, K. C.; Alvin, K. F.; Alexander, S.

1993-01-01

This project (NAG9-574) was meant to be a three-year research project. However, due to NASA's reorganizations during 1992, the project was funded only for one year. Accordingly, every effort was made to make the present final report as if the project was meant to be for one-year duration. Originally, during the first year we were planning to accomplish the following: we were to start with a three dimensional flexible manipulator beam with articulated joints and with a linear control-based controller applied at the joints; using this simple example, we were to design the software systems requirements for real-time processing, introduce the streamlining of various computational algorithms, perform the necessary reorganization of the partitioned simulation procedures, and assess the potential speed-up realization of the solution process by parallel computations. The three reports included as part of the final report address: the streamlining of various computational algorithms; the necessary reorganization of the partitioned simulation procedures, in particular the observer models; and an initial attempt of reconfiguring the flexible space structures.

9 CFR 124.42 - Hearing procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Diligence Hearing § 124.42 Hearing procedure. (a) The presiding officer shall be appointed by the... hearing. (g) The due diligence hearing will be conducted in accordance with rules of practice adopted for... opportunity to participate as a party in the hearing. The standard of due diligence set forth in § 124.33 will...

39 CFR 230.26 - Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure...

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements of the Federal Rules of Civil Procedure (28 U.S.C. Appendix)? 230.26 Section 230.26 Postal Service....26 Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure... Rules of Civil Procedure regarding service of process. ...

Time domain optical coherence tomography investigation of bone matrix interface in rat femurs

NASA Astrophysics Data System (ADS)

Rusu, Laura-Cristina; Negruá¹±iu, Meda-Lavinia; Sinescu, Cosmin; Hoinoiu, Bogdan; Topala, Florin-Ionel; Duma, Virgil-Florin; Rominu, Mihai; Podoleanu, Adrian G.

2013-08-01

The materials used to fabricate scaffolds for tissue engineering are derived from synthetic polymers, mainly from the polyester family, or from natural materials (e.g., collagen and chitosan). The mechanical properties and the structural properties of these materials can be tailored by adjusting the molecular weight, the crystalline state, and the ratio of monomers in the copolymers. Quality control and adjustment of the scaffold manufacturing process are essential to achieve high standard scaffolds. Most scaffolds are made from highly crystalline polymers, which inevitably result in their opaque appearance. Their 3-D opaque structure prevents the observation of internal uneven surface structures of the scaffolds under normal optical instruments, such as the traditional light microscope. The inability to easily monitor the inner structure of scaffolds as well as the interface with the old bone poses a major challenge for tissue engineering: it impedes the precise control and adjustment of the parameters that affect the cell growth in response to various mimicked culture conditions. The aim of this paper is to investigate the interface between the femur rat bone and the new bone that is obtained using a method of tissue engineering that is based on different artificial matrixes inserted in previously artificially induced defects. For this study, 15 rats were used in conformity with ethical procedures. In all the femurs a round defect was induced by drilling with a 1 mm spherical Co-Cr surgical drill. The matrixes used were Bioss and 4bone. These materials were inserted into the induced defects. The femurs were investigated at 1 week, 1 month, 2 month and three month after the surgical procedures. The interfaces were examined using Time Domain (TD) Optical Coherence Tomography (OCT) combined with Confocal Microscopy (CM). The optical configuration uses two single mode directional couplers with a superluminiscent diode as the source centered at 1300 nm. The scanning procedure is similar to that used in any CM, where the fast scanning is en-face (line rate) and the scanning in depth is much slower (at the frame rate). The results showed open interfaces due to the insufficient healing process, as well as closed interfaces due to a new bone formation inside the defect. The conclusion of this study is that TD-OCT can act as a valuable tool in the investigation of the interface between the old bone and the one that has been newly induced due to the osteoinductive process.

10 CFR 765.21 - Procedures for processing reimbursement claims.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Department shall complete a final review of all relevant information prior to making a reimbursement decision... 10 Energy 4 2010-01-01 2010-01-01 false Procedures for processing reimbursement claims. 765.21... AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.21...

40 CFR 63.11980 - What are the test methods and calculation procedures for process wastewater?

Code of Federal Regulations, 2013 CFR

2013-07-01

... calculation procedures for process wastewater? 63.11980 Section 63.11980 Protection of Environment... § 63.11980 What are the test methods and calculation procedures for process wastewater? (a) Performance... performance tests during worst-case operating conditions for the PVCPU when the process wastewater treatment...

40 CFR 63.11980 - What are the test methods and calculation procedures for process wastewater?

Code of Federal Regulations, 2012 CFR

2012-07-01

... calculation procedures for process wastewater? 63.11980 Section 63.11980 Protection of Environment... § 63.11980 What are the test methods and calculation procedures for process wastewater? (a) Performance... performance tests during worst-case operating conditions for the PVCPU when the process wastewater treatment...

40 CFR 63.11980 - What are the test methods and calculation procedures for process wastewater?

Code of Federal Regulations, 2014 CFR

2014-07-01

... calculation procedures for process wastewater? 63.11980 Section 63.11980 Protection of Environment... § 63.11980 What are the test methods and calculation procedures for process wastewater? (a) Performance... performance tests during worst-case operating conditions for the PVCPU when the process wastewater treatment...

Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing

PubMed Central

Chen, Jun-Zhou; Li, Guo-Ai; Cai, Xin; Jiang, Jian-Tang; Shao, Wen-Zhu; Yang, Li; Zhen, Liang

2018-01-01

A non-isothermal ageing process was proposed for an Al-Zn-Mg-Cu alloy aiming to accommodate the slow heating/cooling procedure during the ageing of large components. The evolution of microstructure and microchemistry was analyzed by using transmission electron microscopy, high-angle annular dark field imaging, and energy dispersive spectrometry. The age-hardening of the alloy was examined to evaluate the strengthening behavior during the non-isothermal process. The corrosion behavior was investigated via observing the specimens immersed in EXCO solution (solution for Exfoliation Corrosion Susceptibility test in 2xxx and 7xxx series aluminum alloys, referring ASTM G34-01). Secondary precipitation was observed during the cooling stage, leading to increased precipitate number density. The distribution of grain boundary precipitates transits from discontinuous to continuous at the cooling stage, due to the secondary precipitation’s linking-up effect. The solutes’ enrichment on grain boundary precipitates and the depletion in precipitate-free zones develops during the heating procedure, but remains invariable during the cooling procedure. The corrosion in NIA (Non-isothermal Ageing) treated specimens initiates from pitting and then transits to intergranular corrosion and exfoliation corrosion. The transition from pitting to intergranular corrosion is very slow for specimens heated to 190 °C, but accelerates slightly as the cooling procedure proceeds. The transition to exfoliation corrosion is observed to be quite slow in all specimens in non-isothermal aged to over-aged condition, suggesting a corrosion resistance comparable to that of RRA condition. PMID:29751493

Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing.

PubMed

Chen, Jun-Zhou; Li, Guo-Ai; Cai, Xin; Jiang, Jian-Tang; Shao, Wen-Zhu; Yang, Li; Zhen, Liang

2018-05-03

A non-isothermal ageing process was proposed for an Al-Zn-Mg-Cu alloy aiming to accommodate the slow heating/cooling procedure during the ageing of large components. The evolution of microstructure and microchemistry was analyzed by using transmission electron microscopy, high-angle annular dark field imaging, and energy dispersive spectrometry. The age-hardening of the alloy was examined to evaluate the strengthening behavior during the non-isothermal process. The corrosion behavior was investigated via observing the specimens immersed in EXCO solution (solution for Exfoliation Corrosion Susceptibility test in 2xxx and 7xxx series aluminum alloys, referring ASTM G34-01). Secondary precipitation was observed during the cooling stage, leading to increased precipitate number density. The distribution of grain boundary precipitates transits from discontinuous to continuous at the cooling stage, due to the secondary precipitation’s linking-up effect. The solutes’ enrichment on grain boundary precipitates and the depletion in precipitate-free zones develops during the heating procedure, but remains invariable during the cooling procedure. The corrosion in NIA (Non-isothermal Ageing) treated specimens initiates from pitting and then transits to intergranular corrosion and exfoliation corrosion. The transition from pitting to intergranular corrosion is very slow for specimens heated to 190 °C, but accelerates slightly as the cooling procedure proceeds. The transition to exfoliation corrosion is observed to be quite slow in all specimens in non-isothermal aged to over-aged condition, suggesting a corrosion resistance comparable to that of RRA condition.

An interval model updating strategy using interval response surface models

NASA Astrophysics Data System (ADS)

Fang, Sheng-En; Zhang, Qiu-Hu; Ren, Wei-Xin

2015-08-01

Stochastic model updating provides an effective way of handling uncertainties existing in real-world structures. In general, probabilistic theories, fuzzy mathematics or interval analyses are involved in the solution of inverse problems. However in practice, probability distributions or membership functions of structural parameters are often unavailable due to insufficient information of a structure. At this moment an interval model updating procedure shows its superiority in the aspect of problem simplification since only the upper and lower bounds of parameters and responses are sought. To this end, this study develops a new concept of interval response surface models for the purpose of efficiently implementing the interval model updating procedure. The frequent interval overestimation due to the use of interval arithmetic can be maximally avoided leading to accurate estimation of parameter intervals. Meanwhile, the establishment of an interval inverse problem is highly simplified, accompanied by a saving of computational costs. By this means a relatively simple and cost-efficient interval updating process can be achieved. Lastly, the feasibility and reliability of the developed method have been verified against a numerical mass-spring system and also against a set of experimentally tested steel plates.

Qualification Status of Non-Asbestos Internal Insulation in the Reusable Solid Rocket Motor Program

NASA Technical Reports Server (NTRS)

Clayton, Louie

2011-01-01

This paper provides a status of the qualification efforts associated with NASA's RSRMV non-asbestos internal insulation program. For many years, NASA has been actively engaged in removal of asbestos from the shuttle RSRM motors due to occupation health concerns where technicians are working with an EPA banned material. Careful laboratory and subscale testing has lead to the downselect of a organic fiber known as Polybenzimidazol to replace the asbestos fiber filler in the existing synthetic rubber copolymer Nitrile Butadiene - now named PBI/NBR. Manufacturing, processing, and layup of the new material has been a challenge due to the differences in the baseline shuttle RSRM internal insulator properties and PBI/NBR material properties. For this study, data gathering and reduction procedures for thermal and chemical property characterization for the new candidate material are discussed. Difficulties with test procedures, implementation of properties into the Charring Material Ablator (CMA) codes, and results correlation with static motor fire data are provided. After two successful five segment motor firings using the PBI/NBR insulator, performance results for the new material look good and the material should eventually be qualified for man rated use in large solid rocket motor applications.

A novel Kalman filter based video image processing scheme for two-photon fluorescence microscopy

NASA Astrophysics Data System (ADS)

Sun, Wenqing; Huang, Xia; Li, Chunqiang; Xiao, Chuan; Qian, Wei

2016-03-01

Two-photon fluorescence microscopy (TPFM) is a perfect optical imaging equipment to monitor the interaction between fast moving viruses and hosts. However, due to strong unavoidable background noises from the culture, videos obtained by this technique are too noisy to elaborate this fast infection process without video image processing. In this study, we developed a novel scheme to eliminate background noises, recover background bacteria images and improve video qualities. In our scheme, we modified and implemented the following methods for both host and virus videos: correlation method, round identification method, tree-structured nonlinear filters, Kalman filters, and cell tracking method. After these procedures, most of noises were eliminated and host images were recovered with their moving directions and speed highlighted in the videos. From the analysis of the processed videos, 93% bacteria and 98% viruses were correctly detected in each frame on average.

Vibration Sensor Monitoring of Nickel-Titanium Alloy Turning for Machinability Evaluation.

PubMed

Segreto, Tiziana; Caggiano, Alessandra; Karam, Sara; Teti, Roberto

2017-12-12

Nickel-Titanium (Ni-Ti) alloys are very difficult-to-machine materials causing notable manufacturing problems due to their unique mechanical properties, including superelasticity, high ductility, and severe strain-hardening. In this framework, the aim of this paper is to assess the machinability of Ni-Ti alloys with reference to turning processes in order to realize a reliable and robust in-process identification of machinability conditions. An on-line sensor monitoring procedure based on the acquisition of vibration signals was implemented during the experimental turning tests. The detected vibration sensorial data were processed through an advanced signal processing method in time-frequency domain based on wavelet packet transform (WPT). The extracted sensorial features were used to construct WPT pattern feature vectors to send as input to suitably configured neural networks (NNs) for cognitive pattern recognition in order to evaluate the correlation between input sensorial information and output machinability conditions.

Vibration Sensor Monitoring of Nickel-Titanium Alloy Turning for Machinability Evaluation

PubMed Central

Segreto, Tiziana; Karam, Sara; Teti, Roberto

2017-01-01

Nickel-Titanium (Ni-Ti) alloys are very difficult-to-machine materials causing notable manufacturing problems due to their unique mechanical properties, including superelasticity, high ductility, and severe strain-hardening. In this framework, the aim of this paper is to assess the machinability of Ni-Ti alloys with reference to turning processes in order to realize a reliable and robust in-process identification of machinability conditions. An on-line sensor monitoring procedure based on the acquisition of vibration signals was implemented during the experimental turning tests. The detected vibration sensorial data were processed through an advanced signal processing method in time-frequency domain based on wavelet packet transform (WPT). The extracted sensorial features were used to construct WPT pattern feature vectors to send as input to suitably configured neural networks (NNs) for cognitive pattern recognition in order to evaluate the correlation between input sensorial information and output machinability conditions. PMID:29231864

Process Synchronization and Data Communication between Processes in Real Time Local Area Networks.

DTIC Science & Technology

1985-12-01

52 APPENDIX A: PROCEDURE MAKETABLE .............. 54 APPENDIX B: PROCEDURE MAKEMESSAGE ............. 56 APPENDIX C: PROCEDURE...item. The relation table is built by the driver during system initialization by the procedure maketable , see Appendix A. This procedure reads the file... MAKETABLE Procedure maketable is the first procedure called by the driver. It sets up the relation table in local RAM of SBC 1 by reading the information

[The mini-open Latarjet procedure for treatment of recurrent anterior instability of the shoulder].

PubMed

Pogorzelski, J; Beitzel, K; Imhoff, A B; Braun, S

2016-12-01

Shoulder stabilization. Symptomatic recurrent anterior shoulder instability combined with glenoid bone loss of approximately 20-35 % of the glenoid surface, engaging Hill-Sachs lesion and/or previously failed arthroscopic Bankart repair. In patients with a high risk of redislocation (contact sports) or irreparable soft tissue injury the Latarjet procedure can be considered as a first-line treatment. Contraindicated if arthroscopic Bankart repair is possible. Irreparable damage of subscapularis tendon. Bony defect >35 % of the glenoid that cannot be filled with coracoid bone block. Arbitrary shoulder dislocation. Young patients with open growth plates (relative contraindication). Mini-open deltopectoral approach of approximately 6 cm. Preparation of the coracoid process and the conjoined tendons. Osteotomy of the coracoid process at its base using a 90° sawblade. Split of the subscapularis tendon. Preparation of the glenoid defect and implantation of 2-3 suture anchors where appropriate. Drilling of two parallel holes through the coracoid process. Fixation of the bone block with cannulated screws at the anterior glenoid rim and refixation of the joint capsula, if necessary with the help of the suture anchors. Wound drainage and closure in layers. Intermittent immobilization in a sling for 6 weeks with limited abduction, flexion and external rotation. Sport-specific training after 3 months, over-head sports after 6 months. Since 2009 64 mini-open Latarjet procedures (61 patients) performed. In all, 9.4 % of patients suffered from persistent instability (dislocations and subluxations); only 1 patient needed revision surgery due to instability.

In-process, non-destructive, dynamic testing of high-speed polymer composite rotors

NASA Astrophysics Data System (ADS)

Kuschmierz, Robert; Filippatos, Angelos; Günther, Philipp; Langkamp, Albert; Hufenbach, Werner; Czarske, Jürgen; Fischer, Andreas

2015-03-01

Polymer composite rotors are lightweight and offer great perspectives in high-speed applications such as turbo machinery. Currently, novel rotor structures and materials are investigated for the purpose of increasing machine efficiency and lifetime, as well as allowing for higher dynamic loads. However, due to the complexity of the composite materials an in-process measurement system is required. This allows for monitoring the evolution of damages under dynamic loads, for testing and predicting the structural integrity of composite rotors in process. In rotor design, it can be used for calibrating and improving models, simulating the dynamic behaviour of polymer composite rotors. The measurement system is to work non-invasive, offer micron uncertainty, as well as a high measurement rate of several tens of kHz. Furthermore, it must be applicable at high surface speeds and under technical vacuum. In order to fulfil these demands a novel laser distance measurement system was developed. It provides the angle resolved measurement of the biaxial deformation of a fibre-reinforced polymer composite rotor with micron uncertainty at surface speeds of more than 300 m/s. Furthermore, a simulation procedure combining a finite element model and a damage mechanics model is applied. A comparison of the measured data and the numerically calculated data is performed to validate the simulation towards rotor expansion. This validating procedure can be used for a model calibration in the future. The simulation procedure could be used to investigate different damage-test cases of the rotor, in order to define its structural behaviour without further experiments.

Optical properties of hydroxyapatite obtained by mechanical alloying

NASA Astrophysics Data System (ADS)

Silva, C. C.; Thomazini, D.; Pinheiro, A. G.; Lanciotti, F.; Sasaki, J. M.; Góes, J. C.; Sombra, A. S. B.

2002-09-01

Calcium phosphate based bioceramics, mainly in the form of hydroxyapatite (HA), have been in use in medicine and dentistry for the last 20 years. Applications include coatings of orthopaedic and dental implants, alveolar ridge augmentation, maxillofacial surgery, otolaryngology, and scaffolds for bone growth and as powders in total hip and knee surgery. These materials exhibit several problems of handling and fabrication, which can be overcome by mixing with a suitable binder. In this paper, mechanical alloying has been used successfully to produce nanocrystalline powders of HA using five different experimental procedures. The milled HA were studied by X-ray powder diffraction, infrared and Raman scattering spectroscopy. For four different procedures, HA was obtained after a couple of hours of milling (on an average, 20 h of milling depending on the reaction procedure). The XRD patterns indicate that the grain size is within the range of 29-103 nm. This milling process, used to produce HA, presents the advantage that melting is not necessary and the powder obtained is nanocrystalline with extraordinary mechanical properties. The material can be compacted and transformed in solid ceramic samples. The high efficiency of the process opens a way to produce commercial amount of nanocrystalline HA. Due to the nanocrystalline character of this powder, their mechanical properties have changed and for this reason a pressure of 1 GPa is enough to shape the sample into any geometry.

The AES total ankle replacement: A mid-term analysis of 93 cases.

PubMed

Henricson, Anders; Knutson, Kaj; Lindahl, Johan; Rydholm, Urban

2010-06-01

There are few studies concerning specific total ankle arthroplasties. This study reports mid-term survival data for the AES prosthesis. Ninety-three AES ankle arthroplasties were performed by the senior authors. The mean follow-up was 3.5 years. The 5-year survivorship and also the number of simultaneous procedures, reoperations, additional procedures and revisions are analyzed. The 5-year survivorship with revision for any reason as end-point was 90%. Simultaneous procedures were performed in 25 patients, deltoid release and subtalar fusion being the most common. There were seven revisions, one due to loosening, and two due to infection, instability and fractures, respectively. Twenty-seven reoperations or additional procedures were performed in 23 patients with a procedure for malleolar impingement being the most common reoperation, and correction of hindfoot varus being the most common reason for an additional procedure. The AES total ankle replacement seems to be a reasonably safe procedure in experienced hands. Copyright 2009 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor

PubMed Central

Guerrero-Barajas, Claudia; Ordaz, Alberto; García-Solares, Selene Montserrat; Garibay-Orijel, Claudio; Bastida-González, Fernando; Zárate-Segura, Paola Berenice

2015-01-01

The importance of microbial sulfate reduction relies on the various applications that it offers in environmental biotechnology. Engineered sulfate reduction is used in industrial wastewater treatment to remove large concentrations of sulfate along with the chemical oxygen demand (COD) and heavy metals. The most common approach to the process is with anaerobic bioreactors in which sulfidogenic sludge is obtained through adaptation of predominantly methanogenic granular sludge to sulfidogenesis. This process may take a long time and does not always eliminate the competition for substrate due to the presence of methanogens in the sludge. In this work, we propose a novel approach to obtain sulfidogenic sludge in which hydrothermal vents sediments are the original source of microorganisms. The microbial community developed in the presence of sulfate and volatile fatty acids is wide enough to sustain sulfate reduction over a long period of time without exhibiting inhibition due to sulfide. This protocol describes the procedure to generate the sludge from the sediments in an upflow anaerobic sludge blanket (UASB) type of reactor. Furthermore, the protocol presents the procedure to demonstrate the capability of the sludge to remove by reductive dechlorination a model of a highly toxic organic pollutant such as trichloroethylene (TCE). The protocol is divided in three stages: (1) the formation of the sludge and the determination of its sulfate reducing activity in the UASB, (2) the experiment to remove the TCE by the sludge, and (3) the identification of microorganisms in the sludge after the TCE reduction. Although in this case the sediments were taken from a site located in Mexico, the generation of a sulfidogenic sludge by using this procedure may work if a different source of sediments is taken since marine sediments are a natural pool of microorganisms that may be enriched in sulfate reducing bacteria. PMID:26555802

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor.

PubMed

Guerrero-Barajas, Claudia; Ordaz, Alberto; García-Solares, Selene Montserrat; Garibay-Orijel, Claudio; Bastida-González, Fernando; Zárate-Segura, Paola Berenice

2015-10-15

The importance of microbial sulfate reduction relies on the various applications that it offers in environmental biotechnology. Engineered sulfate reduction is used in industrial wastewater treatment to remove large concentrations of sulfate along with the chemical oxygen demand (COD) and heavy metals. The most common approach to the process is with anaerobic bioreactors in which sulfidogenic sludge is obtained through adaptation of predominantly methanogenic granular sludge to sulfidogenesis. This process may take a long time and does not always eliminate the competition for substrate due to the presence of methanogens in the sludge. In this work, we propose a novel approach to obtain sulfidogenic sludge in which hydrothermal vents sediments are the original source of microorganisms. The microbial community developed in the presence of sulfate and volatile fatty acids is wide enough to sustain sulfate reduction over a long period of time without exhibiting inhibition due to sulfide. This protocol describes the procedure to generate the sludge from the sediments in an upflow anaerobic sludge blanket (UASB) type of reactor. Furthermore, the protocol presents the procedure to demonstrate the capability of the sludge to remove by reductive dechlorination a model of a highly toxic organic pollutant such as trichloroethylene (TCE). The protocol is divided in three stages: (1) the formation of the sludge and the determination of its sulfate reducing activity in the UASB, (2) the experiment to remove the TCE by the sludge, and (3) the identification of microorganisms in the sludge after the TCE reduction. Although in this case the sediments were taken from a site located in Mexico, the generation of a sulfidogenic sludge by using this procedure may work if a different source of sediments is taken since marine sediments are a natural pool of microorganisms that may be enriched in sulfate reducing bacteria.

Revision of infected knee arthroplasties in Denmark

PubMed Central

Lindberg-Larsen, Martin; Jørgensen, Christoffer C; Bagger, Jens; Schrøder, Henrik M; Kehlet, Henrik

2016-01-01

Background and purpose The surgical treatment of periprosthetic knee infection is generally either a partial revision procedure (open debridement and exchange of the tibial insert) or a 2-stage exchange arthroplasty procedure. We describe the failure rates of these procedures on a nationwide basis. Patients and methods 105 partial revisions (100 patients) and 215 potential 2-stage revision procedures (205 patients) performed due to infection from July 1, 2011 to June 30, 2013 were identified from the Danish Knee Arthroplasty Register (DKR). Failure was defined as surgically related death ≤ 90 days postoperatively, re-revision due to infection, or not reaching the second stage for a planned 2-stage procedure within a median follow-up period of 3.2 (2.2–4.2) years. Results The failure rate of the partial revisions was 43%. 71 of the partial revisions (67%) were revisions of a primary prosthesis with a re-revision rate due to infection of 34%, as compared to 55% in revisions of a revision prosthesis (p = 0.05). The failure rate of the 2-stage revisions was 30%. Median time interval between stages was 84 (9–597) days. 117 (54%) of the 2-stage revisions were revisions of a primary prosthesis with a re-revision rate due to infection of 21%, as compared to 29% in revisions of a previously revised prosthesis (p = 0.1). Overall postoperative mortality was 0.6% in high-volume centers (> 30 procedures within 2 years) as opposed to 7% in the remaining centers (p = 0.003). Interpretation The failure rates of 43% after the partial revision procedures and 30% after the 2-stage revisions in combination with the higher mortality outside high-volume centers call for centralization and reconsideration of surgical strategies. PMID:26900908

Background contamination by coplanar polychlorinated biphenyls (PCBs) in trace level high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) analytical procedures.

PubMed

Ferrario, J; Byrne, C; Dupuy, A E

1997-06-01

The addition of the "dioxin-like" polychlorinated biphenyl (PCB) congeners to the assessment of risk associated with the 2,3,7,8-chlorine substituted dioxins and furans has dramatically increased the number of laboratories worldwide that are developing analytical procedures for their detection and quantitation. Most of these procedures are based on established sample preparation and analytical techniques employing high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS), which are used for the analyses of dioxin/furans at low parts-per-trillion (ppt) levels. A significant and widespread problem that arises when using these sample preparation procedures for the analysis of coplanar PCBs is the presence of background levels of these congeners. Industrial processes, urban incineration, leaking electrical transformers, hazardous waste accidents, and improper waste disposal practices have released appreciable quantities of PCBs into the environment. This contamination has resulted in the global distribution of these compounds via the atmosphere and their ubiquitous presence in ambient air. The background presence of these compounds in method blanks must be addressed when determining the exact concentrations of these and other congeners in environmental samples. In this study reliable procedures were developed to accurately define these background levels and assess their variability over the course of the study. The background subtraction procedures developed and employed increase the probability that the values reported accurately represent the concentrations found in the samples and were not biased due to this background contamination.

Background contamination by coplanar polychlorinated biphenyls (PCBs) in trace level high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) analytical procedures

NASA Technical Reports Server (NTRS)

Ferrario, J.; Byrne, C.; Dupuy, A. E. Jr

1997-01-01

The addition of the "dioxin-like" polychlorinated biphenyl (PCB) congeners to the assessment of risk associated with the 2,3,7,8-chlorine substituted dioxins and furans has dramatically increased the number of laboratories worldwide that are developing analytical procedures for their detection and quantitation. Most of these procedures are based on established sample preparation and analytical techniques employing high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS), which are used for the analyses of dioxin/furans at low parts-per-trillion (ppt) levels. A significant and widespread problem that arises when using these sample preparation procedures for the analysis of coplanar PCBs is the presence of background levels of these congeners. Industrial processes, urban incineration, leaking electrical transformers, hazardous waste accidents, and improper waste disposal practices have released appreciable quantities of PCBs into the environment. This contamination has resulted in the global distribution of these compounds via the atmosphere and their ubiquitous presence in ambient air. The background presence of these compounds in method blanks must be addressed when determining the exact concentrations of these and other congeners in environmental samples. In this study reliable procedures were developed to accurately define these background levels and assess their variability over the course of the study. The background subtraction procedures developed and employed increase the probability that the values reported accurately represent the concentrations found in the samples and were not biased due to this background contamination.

Designing a fully automated multi-bioreactor plant for fast DoE optimization of pharmaceutical protein production.

PubMed

Fricke, Jens; Pohlmann, Kristof; Jonescheit, Nils A; Ellert, Andree; Joksch, Burkhard; Luttmann, Reiner

2013-06-01

The identification of optimal expression conditions for state-of-the-art production of pharmaceutical proteins is a very time-consuming and expensive process. In this report a method for rapid and reproducible optimization of protein expression in an in-house designed small-scale BIOSTAT® multi-bioreactor plant is described. A newly developed BioPAT® MFCS/win Design of Experiments (DoE) module (Sartorius Stedim Systems, Germany) connects the process control system MFCS/win and the DoE software MODDE® (Umetrics AB, Sweden) and enables therefore the implementation of fully automated optimization procedures. As a proof of concept, a commercial Pichia pastoris strain KM71H has been transformed for the expression of potential malaria vaccines. This approach has allowed a doubling of intact protein secretion productivity due to the DoE optimization procedure compared to initial cultivation results. In a next step, robustness regarding the sensitivity to process parameter variability has been proven around the determined optimum. Thereby, a pharmaceutical production process that is significantly improved within seven 24-hour cultivation cycles was established. Specifically, regarding the regulatory demands pointed out in the process analytical technology (PAT) initiative of the United States Food and Drug Administration (FDA), the combination of a highly instrumented, fully automated multi-bioreactor platform with proper cultivation strategies and extended DoE software solutions opens up promising benefits and opportunities for pharmaceutical protein production. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Analysis LANDSAT-4 Thematic Mapper Geometric Properties

NASA Technical Reports Server (NTRS)

Walker, R. E.; Zobrist, A. L.; Bryant, N. A.; Gokhman, B.; Friedman, S. Z.; Logan, T. L.

1984-01-01

LANDSAT Thematic Mapper P-data of Washington, D. C., Harrisburg, PA, and Salton Sea, CA are analyzed to determine magnitudes and causes of error in the geometric conformity of the data to known Earth surface geometry. Several tests of data geometry are performed. Intraband and interband correlation and registration are investigated, exclusive of map based ground truth. The magnitudes and statistical trends of pixel offsets between a single band's mirror scans (due to processing procedures) are computed, and the inter-band integrity of registration is analyzed. A line to line correlation analysis is included.

[Controlling instruments in radiology].

PubMed

Maurer, M

2013-10-01

Due to the rising costs and competitive pressures radiological clinics and practices are now facing, controlling instruments are gaining importance in the optimization of structures and processes of the various diagnostic examinations and interventional procedures. It will be shown how the use of selected controlling instruments can secure and improve the performance of radiological facilities. A definition of the concept of controlling will be provided. It will be shown which controlling instruments can be applied in radiological departments and practices. As an example, two of the controlling instruments, material cost analysis and benchmarking, will be illustrated.

Architecture and data processing alternatives for the tse computer. Volume 4: Image rotation using tse operations

NASA Technical Reports Server (NTRS)

Kao, M. H.; Bodenheimer, R. E.

1976-01-01

The tse computer's capability of achieving image congruence between temporal and multiple images with misregistration due to rotational differences is reported. The coordinate transformations are obtained and a general algorithms is devised to perform image rotation using tse operations very efficiently. The details of this algorithm as well as its theoretical implications are presented. Step by step procedures of image registration are described in detail. Numerous examples are also employed to demonstrate the correctness and the effectiveness of the algorithms and conclusions and recommendations are made.

Evaluation of LANDSAT-4 TM and MSS ground geometry performance without ground control

NASA Technical Reports Server (NTRS)

Bryant, N. A.; Zobrist, A.

1983-01-01

LANDSAT thematic mapper P-data of Washington, D.C., Harrisburg, PA, and Salton Sea, CA were analyzed to determine magnitudes and causes of error in the geometric conformity of the data to known earth-surface geometry. Several tests of data geometry were performed. Intra-band and inter-band correlation and registration were investigated, exclusive of map-based ground truth. Specifically, the magnitudes and statistical trends of pixel offsets between a single band's mirror scans (due to processing procedures) were computed, and the inter-band integrity of registration was analyzed.

Evaluation of IKTS Transparent Polycrystalline Magnesium Aluminate Spinel (MgAl2O4) for Armor and Infrared Dome/Window Applications

DTIC Science & Technology

2013-03-01

interacted with (15). 4.3.3 Experimental Procedure Two MgAl2O4 spinel samples with nominal 0.6- and 1.6-μm mean grain sizes were tested using advanced...unable to make specific quantitative predictions at this time. Due to the nature of the experimental process, this technique is suitable only for...Information From Spherical Indentation; ARL-TR-4229; U.S. Army Research Laboratory: Aberdeen Proving Ground, MD, 2007. 24. ASTM E112. Standard Test

47 CFR 1.926 - Application processing; initial procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Application processing; initial procedures. 1.926 Section 1.926 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Wireless Radio Services Applications and Proceedings Application Requirements and Procedures § 1.926...

47 CFR 1.926 - Application processing; initial procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Application processing; initial procedures. 1.926 Section 1.926 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Wireless Radio Services Applications and Proceedings Application Requirements and Procedures § 1.926...

Outlining a selection procedure for Saccharomyces cerevisiae isolated from grape marc to improve fermentation process and distillate quality.

PubMed

Bovo, Barbara; Carlot, Milena; Fontana, Federico; Lombardi, Angiolella; Soligo, Stefano; Giacomini, Alessio; Corich, Viviana

2015-04-01

Nowadays grape marc represents one of the main by-product of winemaking. Many South Europe countries valorize this ligno-cellulosic waste through fermentation and distillation for industrial alcoholic beverage production. The storage of marcs is a crucial phase in the distillation process, due to the physicochemical transformations ascribed to microbial activity. Among the methods adopted by distillers to improve the quality of spirits, the use of selected yeasts has not been explored so far, therefore in this work we evaluated the selection criteria of Saccharomyces cerevisiae strains for grape marc fermentation. The proposed selection procedure included three steps: characterization of phenotypical traits, evaluation of selected strains on pasteurised grape marc at lab-scale (100 g) and pilot-scale fermentation (350 kg). This selection process was applied on 104 strains isolated from grape marcs of different origins and technological treatment. Among physiological traits, β-glucosidase activity level as quality trait seems to be only partially involved in increasing varietal flavour. More effective in describing yeast impact on distillate quality is the ratio higher alcohols/esters that indicates strain ability to increase positive flavours. Finally, evaluating grape marc as source of selected yeasts, industrial treatment rather than varietal origin seems to shape strain technological and quality traits. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of the Quality of Action Cameras with Wide-Angle Lenses in Uav Photogrammetry

NASA Astrophysics Data System (ADS)

Hastedt, H.; Ekkel, T.; Luhmann, T.

2016-06-01

The application of light-weight cameras in UAV photogrammetry is required due to restrictions in payload. In general, consumer cameras with normal lens type are applied to a UAV system. The availability of action cameras, like the GoPro Hero4 Black, including a wide-angle lens (fish-eye lens) offers new perspectives in UAV projects. With these investigations, different calibration procedures for fish-eye lenses are evaluated in order to quantify their accuracy potential in UAV photogrammetry. Herewith the GoPro Hero4 is evaluated using different acquisition modes. It is investigated to which extent the standard calibration approaches in OpenCV or Agisoft PhotoScan/Lens can be applied to the evaluation processes in UAV photogrammetry. Therefore different calibration setups and processing procedures are assessed and discussed. Additionally a pre-correction of the initial distortion by GoPro Studio and its application to the photogrammetric purposes will be evaluated. An experimental setup with a set of control points and a prospective flight scenario is chosen to evaluate the processing results using Agisoft PhotoScan. Herewith it is analysed to which extent a pre-calibration and pre-correction of a GoPro Hero4 will reinforce the reliability and accuracy of a flight scenario.

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 630.1008 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1008 State-level processes and... sustain their respective work zone safety and mobility policies. State-level processes and procedures...

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 630.1008 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1008 State-level processes and... sustain their respective work zone safety and mobility policies. State-level processes and procedures...

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 630.1008 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1008 State-level processes and... sustain their respective work zone safety and mobility policies. State-level processes and procedures...

12 CFR 303.43 - Processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Standard processing. For those applications which are not processed pursuant to the expedited procedures... Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE FILING PROCEDURES... institution as defined in § 303.2(r) will be acknowledged in writing by the FDIC and will receive expedited...

12 CFR 303.43 - Processing.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Standard processing. For those applications which are not processed pursuant to the expedited procedures... Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE FILING PROCEDURES... institution as defined in § 303.2(r) will be acknowledged in writing by the FDIC and will receive expedited...

Process dissociation and mixture signal detection theory.

PubMed

DeCarlo, Lawrence T

2008-11-01

The process dissociation procedure was developed in an attempt to separate different processes involved in memory tasks. The procedure naturally lends itself to a formulation within a class of mixture signal detection models. The dual process model is shown to be a special case. The mixture signal detection model is applied to data from a widely analyzed study. The results suggest that a process other than recollection may be involved in the process dissociation procedure.

Robust solder joint attachment of coaxial cable leads to piezoelectric ceramic electrodes.

PubMed

Vianco, P T

1993-01-01

A technique was developed for the solder attachment of coaxial cable leads to silver-bearing thick-film electrodes on piezoelectric ceramics. Soldering the cable leads directly to the thick film caused bonds with low mechanical strength due to poor solder joint geometry. A barrier coating of 1.5 mum Cu/1.5 mum Ni/1.0 mum Sn deposited on the thick-film layer improved the strength of the solder joints by eliminating the adsorption of Ag from the thick film, which was responsible for the improper solder joint geometry. The procedure does not require special preparation of the electrode surface and is cost effective due to the use of nonprecious metal films and the batch processing capabilities of the electron beam deposition technique.

Maximum von Mises Stress in the Loading Environment of Mass Acceleration Curve

NASA Technical Reports Server (NTRS)

Glaser, Robert J.; Chen, Long Y.

2006-01-01

Method for calculating stress due to acceleration loading: 1) Part has been designed by FEA and hand calculation in one critical loading direction judged by the analyst; 2) Maximum stress can be due to loading in another direction; 3) Analysis procedure to be presented determines: a) The maximum Mises stress at any point; and b) The direction of maximum loading associated with the "stress". Concept of Mass Acceleration Curves (MAC): 1) Developed by JPL to perform preliminary structural sizing (i.e. Mariners, Voyager, Galileo, Pathfinder, MER,...MSL); 2) Acceleration of physical masses are bounded by a curve; 3) G-levels of vibro-acoustic and transient environments; 4) Convergent process before the couple loads cycle; and 5) Semi-empirical method to effectively bound the loads, not a simulation of the actual response.

Uncertainty in least-squares fits to the thermal noise spectra of nanomechanical resonators with applications to the atomic force microscope.

PubMed

Sader, John E; Yousefi, Morteza; Friend, James R

2014-02-01

Thermal noise spectra of nanomechanical resonators are used widely to characterize their physical properties. These spectra typically exhibit a Lorentzian response, with additional white noise due to extraneous processes. Least-squares fits of these measurements enable extraction of key parameters of the resonator, including its resonant frequency, quality factor, and stiffness. Here, we present general formulas for the uncertainties in these fit parameters due to sampling noise inherent in all thermal noise spectra. Good agreement with Monte Carlo simulation of synthetic data and measurements of an Atomic Force Microscope (AFM) cantilever is demonstrated. These formulas enable robust interpretation of thermal noise spectra measurements commonly performed in the AFM and adaptive control of fitting procedures with specified tolerances.

Uncertainty in least-squares fits to the thermal noise spectra of nanomechanical resonators with applications to the atomic force microscope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sader, John E., E-mail: jsader@unimelb.edu.au; Yousefi, Morteza; Friend, James R.

2014-02-15

Thermal noise spectra of nanomechanical resonators are used widely to characterize their physical properties. These spectra typically exhibit a Lorentzian response, with additional white noise due to extraneous processes. Least-squares fits of these measurements enable extraction of key parameters of the resonator, including its resonant frequency, quality factor, and stiffness. Here, we present general formulas for the uncertainties in these fit parameters due to sampling noise inherent in all thermal noise spectra. Good agreement with Monte Carlo simulation of synthetic data and measurements of an Atomic Force Microscope (AFM) cantilever is demonstrated. These formulas enable robust interpretation of thermal noisemore » spectra measurements commonly performed in the AFM and adaptive control of fitting procedures with specified tolerances.« less

Numerical simulation of machining distortions on a forged aerospace component following a one and a multi-step approaches

NASA Astrophysics Data System (ADS)

Prete, Antonio Del; Franchi, Rodolfo; Antermite, Fabrizio; Donatiello, Iolanda

2018-05-01

Residual stresses appear in a component as a consequence of thermo-mechanical processes (e.g. ring rolling process) casting and heat treatments. When machining these kinds of components, distortions arise due to the redistribution of residual stresses due to the foregoing process history inside the material. If distortions are excessive, they can lead to a large number of scrap parts. Since dimensional accuracy can affect directly the engines efficiency, the dimensional control for aerospace components is a non-trivial issue. In this paper, the problem related to the distortions of large thin walled aeroengines components in nickel superalloys has been addressed. In order to estimate distortions on inner diameters after internal turning operations, a 3D Finite Element Method (FEM) analysis has been developed on a real industrial test case. All the process history, has been taken into account by developing FEM models of ring rolling process and heat treatments. Three different strategies of ring rolling process have been studied and the combination of related parameters which allows to obtain the best dimensional accuracy has been found. Furthermore, grain size evolution and recrystallization phenomena during manufacturing process has been numerically investigated using a semi empirical Johnson-Mehl-Avrami-Kohnogorov (JMAK) model. The volume subtractions have been simulated by boolean trimming: a one step and a multi step analysis have been performed. The multi-step procedure has allowed to choose the best material removal sequence in order to reduce machining distortions.

Methodological strategies in using home sleep apnea testing in research and practice.

PubMed

Miller, Jennifer N; Schulz, Paula; Pozehl, Bunny; Fiedler, Douglas; Fial, Alissa; Berger, Ann M

2017-11-14

Home sleep apnea testing (HSAT) has increased due to improvements in technology, accessibility, and changes in third party reimbursement requirements. Research studies using HSAT have not consistently reported procedures and methodological challenges. This paper had two objectives: (1) summarize the literature on use of HSAT in research of adults and (2) identify methodological strategies to use in research and practice to standardize HSAT procedures and information. Search strategy included studies of participants undergoing sleep testing for OSA using HSAT. MEDLINE via PubMed, CINAHL, and Embase with the following search terms: "polysomnography," "home," "level III," "obstructive sleep apnea," and "out of center testing." Research articles that met inclusion criteria (n = 34) inconsistently reported methods and methodological challenges in terms of: (a) participant sampling; (b) instrumentation issues; (c) clinical variables; (d) data processing; and (e) patient acceptability. Ten methodological strategies were identified for adoption when using HSAT in research and practice. Future studies need to address the methodological challenges summarized in this paper as well as identify and report consistent HSAT procedures and information.

An improved ring removal procedure for in-line x-ray phase contrast tomography

NASA Astrophysics Data System (ADS)

Massimi, Lorenzo; Brun, Francesco; Fratini, Michela; Bukreeva, Inna; Cedola, Alessia

2018-02-01

The suppression of ring artifacts in x-ray computed tomography (CT) is a required step in practical applications; it can be addressed by introducing refined digital low pass filters within the reconstruction process. However, these filters may introduce additional ringing artifacts when simultaneously imaging pure phase objects and elements having a non-negligible absorption coefficient. Ringing originates at sharp interfaces, due to the truncation of spatial high frequencies, and severely affects qualitative and quantitative analysis of the reconstructed slices. In this work, we discuss the causes of ringing artifacts, and present a general compensation procedure to account for it. The proposed procedure has been tested with CT datasets of the mouse central nervous system acquired at different synchrotron radiation facilities. The results demonstrate that the proposed method compensates for ringing artifacts induced by low pass ring removal filters. The effectiveness of the ring suppression filters is not altered; the proposed method can thus be considered as a framework to improve the ring removal step, regardless of the specific filter adopted or the imaged sample.

DFLOWZ: A free program to evaluate the area potentially inundated by a debris flow

NASA Astrophysics Data System (ADS)

Berti, M.; Simoni, A.

2014-06-01

The transport and deposition mechanisms of debris flows are still poorly understood due to the complexity of the interactions governing the behavior of water-sediment mixtures. Empirical-statistical methods can therefore be used, instead of more sophisticated numerical methods, to predict the depositional behavior of these highly dangerous gravitational movements. We use widely accepted semi-empirical scaling relations and propose an automated procedure (DFLOWZ) to estimate the area potentially inundated by a debris flow event. Beside a digital elevation model (DEM), the procedure has only two input requirements: the debris flow volume and the possible flow-path. The procedure is implemented in Matlab and a Graphical User Interface helps to visualize initial conditions, flow propagation and final results. Different hypothesis about the depositional behavior of an event can be tested together with the possible effect of simple remedial measures. Uncertainties associated to scaling relations can be treated and their impact on results evaluated. Our freeware application aims to facilitate and speed up the process of susceptibility mapping. We discuss limits and advantages of the method in order to inform inexperienced users.

An improved ring removal procedure for in-line x-ray phase contrast tomography.

PubMed

Massimi, Lorenzo; Brun, Francesco; Fratini, Michela; Bukreeva, Inna; Cedola, Alessia

2018-02-12

The suppression of ring artifacts in x-ray computed tomography (CT) is a required step in practical applications; it can be addressed by introducing refined digital low pass filters within the reconstruction process. However, these filters may introduce additional ringing artifacts when simultaneously imaging pure phase objects and elements having a non-negligible absorption coefficient. Ringing originates at sharp interfaces, due to the truncation of spatial high frequencies, and severely affects qualitative and quantitative analysis of the reconstructed slices. In this work, we discuss the causes of ringing artifacts, and present a general compensation procedure to account for it. The proposed procedure has been tested with CT datasets of the mouse central nervous system acquired at different synchrotron radiation facilities. The results demonstrate that the proposed method compensates for ringing artifacts induced by low pass ring removal filters. The effectiveness of the ring suppression filters is not altered; the proposed method can thus be considered as a framework to improve the ring removal step, regardless of the specific filter adopted or the imaged sample.

Computationally efficient algorithm for Gaussian Process regression in case of structured samples

NASA Astrophysics Data System (ADS)

Belyaev, M.; Burnaev, E.; Kapushev, Y.

2016-04-01

Surrogate modeling is widely used in many engineering problems. Data sets often have Cartesian product structure (for instance factorial design of experiments with missing points). In such case the size of the data set can be very large. Therefore, one of the most popular algorithms for approximation-Gaussian Process regression-can be hardly applied due to its computational complexity. In this paper a computationally efficient approach for constructing Gaussian Process regression in case of data sets with Cartesian product structure is presented. Efficiency is achieved by using a special structure of the data set and operations with tensors. Proposed algorithm has low computational as well as memory complexity compared to existing algorithms. In this work we also introduce a regularization procedure allowing to take into account anisotropy of the data set and avoid degeneracy of regression model.

Generic System for Remote Testing and Calibration of Measuring Instruments: Security Architecture

NASA Astrophysics Data System (ADS)

Jurčević, M.; Hegeduš, H.; Golub, M.

2010-01-01

Testing and calibration of laboratory instruments and reference standards is a routine activity and is a resource and time consuming process. Since many of the modern instruments include some communication interfaces, it is possible to create a remote calibration system. This approach addresses a wide range of possible applications and permits to drive a number of different devices. On the other hand, remote calibration process involves a number of security issues due to recommendations specified in standard ISO/IEC 17025, since it is not under total control of the calibration laboratory personnel who will sign the calibration certificate. This approach implies that the traceability and integrity of the calibration process directly depends on the collected measurement data. The reliable and secure remote control and monitoring of instruments is a crucial aspect of internet-enabled calibration procedure.

39 CFR 230.26 - Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Do these rules affect the service of process....26 Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure... Rules of Civil Procedure regarding service of process. ...

Naturally Occurring Food Toxins

PubMed Central

Dolan, Laurie C.; Matulka, Ray A.; Burdock, George A.

2010-01-01

Although many foods contain toxins as a naturally-occurring constituent or, are formed as the result of handling or processing, the incidence of adverse reactions to food is relatively low. The low incidence of adverse effects is the result of some pragmatic solutions by the US Food and Drug Administration (FDA) and other regulatory agencies through the creative use of specifications, action levels, tolerances, warning labels and prohibitions. Manufacturers have also played a role by setting limits on certain substances and developing mitigation procedures for process-induced toxins. Regardless of measures taken by regulators and food producers to protect consumers from natural food toxins, consumption of small levels of these materials is unavoidable. Although the risk for toxicity due to consumption of food toxins is fairly low, there is always the possibility of toxicity due to contamination, overconsumption, allergy or an unpredictable idiosyncratic response. The purpose of this review is to provide a toxicological and regulatory overview of some of the toxins present in some commonly consumed foods, and where possible, discuss the steps that have been taken to reduce consumer exposure, many of which are possible because of the unique process of food regulation in the United States. PMID:22069686

Comparing the role of selective and divided attention in the composite face effect: Insights from Attention Operating Characteristic (AOC) plots and cross-contingency correlations.

PubMed

Fitousi, Daniel

2016-03-01

Composite faces combine the top half of one face with the bottom half of another to create a compelling illusion of a new face. Evidence for holistic processing with composite faces comes primarily from a matching procedure in a selective attention task. In the present study, a dual-task approach has been employed to study whether composite faces reflect genuine holistic (i.e., fusion of parts) or non-holistic processing strategies (i.e., switching, resource sharing). This has been accomplished by applying the Attention Operation Characteristic methodology (AOC, Sperling & Melchner, 1978a, 1978b) and cross-contingency correlations (Bonnel & Prinzmetal, 1998) to composite faces. Overall, the results converged on the following conclusions: (a) observers can voluntarily allocate differential amounts of attention to the top and bottom parts in both spatially aligned and misaligned composite faces, (b) the interaction between composite face halves is due to attentional limitations, not due to switching or fusion strategies, and (c) the processing of aligned and misaligned composite faces is quantitatively and qualitatively similar. Taken together, these results challenge the holistic interpretation of the composite face illusion. Copyright © 2015 Elsevier B.V. All rights reserved.

Application of statistical process control and process capability analysis procedures in orbiter processing activities at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Safford, Robert R.; Jackson, Andrew E.; Swart, William W.; Barth, Timothy S.

1994-01-01

Successful ground processing at KSC requires that flight hardware and ground support equipment conform to specifications at tens of thousands of checkpoints. Knowledge of conformance is an essential requirement for launch. That knowledge of conformance at every requisite point does not, however, enable identification of past problems with equipment, or potential problem areas. This paper describes how the introduction of Statistical Process Control and Process Capability Analysis identification procedures into existing shuttle processing procedures can enable identification of potential problem areas and candidates for improvements to increase processing performance measures. Results of a case study describing application of the analysis procedures to Thermal Protection System processing are used to illustrate the benefits of the approaches described in the paper.

Remediation of hexavalent chromium contamination in chromite ore processing residue by sodium dithionite and sodium phosphate addition and its mechanism.

PubMed

Li, Yunyi; Cundy, Andrew B; Feng, Jingxuan; Fu, Hang; Wang, Xiaojing; Liu, Yangsheng

2017-05-01

Large amounts of chromite ore processing residue (COPR) wastes have been deposited in many countries worldwide, generating significant contamination issues from the highly mobile and toxic hexavalent chromium species (Cr(VI)). In this study, sodium dithionite (Na 2 S 2 O 4 ) was used to reduce Cr(VI) to Cr(III) in COPR containing high available Fe, and then sodium phosphate (Na 3 PO 4 ) was utilized to further immobilize Cr(III), via a two-step procedure (TSP). Remediation and immobilization processes and mechanisms were systematically investigated using batch experiments, sequential extraction studies, X-ray diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS). Results showed that Na 2 S 2 O 4 effectively reduced Cr(VI) to Cr(III), catalyzed by Fe(III). The subsequent addition of Na 3 PO 4 further immobilized Cr(III) by the formation of crystalline CrPO 4 ·6H 2 O. However, addition of Na 3 PO 4 simultaneously with Na 2 S 2 O 4 (via a one-step procedure, OSP) impeded Cr(VI) reduction due to the competitive reaction of Na 3 PO 4 and Na 2 S 2 O 4 with Fe(III). Thus, the remediation efficiency of the TSP was much higher than the corresponding OSP. Using an optimal dosage in the two-step procedure (Na 2 S 2 O 4 at a dosage of 12× the stoichiometric requirement for 15 days, and then Na 3 PO 4 in a molar ratio (i.e. Na 3 PO 4 : initial Cr(VI)) of 4:1 for another 15 days), the total dissolved Cr in the leachate determined via Toxicity Characteristic Leaching Procedure (TCLP Cr) testing of our samples was reduced to 3.8 mg/L (from an initial TCLP Cr of 112.2 mg/L, i.e. at >96% efficiency). Copyright © 2017 Elsevier Ltd. All rights reserved.

Three-dimensional visualization of morphology and ventilation procedure (air flow and diffusion) of a subdivision of the acinus using synchrotron radiation microtomography of the human lung specimens

NASA Astrophysics Data System (ADS)

Shimizu, Kenji; Ikura, Hirohiko; Ikezoe, Junpei; Nagareda, Tomofumi; Yagi, Naoto; Umetani, Keiji; Imai, Yutaka

2004-04-01

We have previously reported a synchrotron radiation (SR) microtomography system constructed at the bending magnet beamline at the SPring-8. This system has been applied to the lungs obtained at autopsy and inflated and fixed by Heitzman"s method. Normal lung and lung specimens with two different types of pathologic processes (fibrosis and emphysema) were included. Serial SR microtomographic images were stacked to yield the isotropic volumetric data with high-resolution (12 μm3 in voxel size). Within the air spaces of a subdivision of the acinus, each voxel is segmented three-dimensionally using a region growing algorithm ("rolling ball algorithm"). For each voxel within the segmented air spaces, two types of voxel coding have been performed: single-seeded (SS) coding and boundary-seeded (BS) coding, in which the minimum distance from an initial point as the only seed point and all object boundary voxels as a seed set were calculated and assigned as the code values to each voxel, respectively. With these two codes, combinations of surface rendering and volume rendering techniques were applied to visualize three-dimensional morphology of a subdivision of the acinus. Furthermore, sequentially filling process of air into a subdivision of the acinus was simulated under several conditions to visualize the ventilation procedure (air flow and diffusion). A subdivision of the acinus was reconstructed three-dimensionally, demonstrating the normal architecture of the human lung. Significant differences in appearance of ventilation procedure were observed between normal and two pathologic processes due to the alteration of the lung architecture. Three-dimensional reconstruction of the microstructure of a subdivision of the acinus and visualization of the ventilation procedure (air flow and diffusion) with SR microtomography would offer a new approach to study the morphology, physiology, and pathophysiology of the human respiratory system.

34 CFR Appendix C to Part 682 - Procedures for Curing Violations of the Due Diligence in Collection and Timely Filing of Claims...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 4 2013-07-01 2013-07-01 false Procedures for Curing Violations of the Due Diligence... Part 682 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Pt...

34 CFR Appendix C to Part 682 - Procedures for Curing Violations of the Due Diligence in Collection and Timely Filing of Claims...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 4 2011-07-01 2011-07-01 false Procedures for Curing Violations of the Due Diligence... Part 682 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Pt...

34 CFR Appendix C to Part 682 - Procedures for Curing Violations of the Due Diligence in Collection and Timely Filing of Claims...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 4 2012-07-01 2012-07-01 false Procedures for Curing Violations of the Due Diligence... Part 682 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Pt...

34 CFR Appendix C to Part 682 - Procedures for Curing Violations of the Due Diligence in Collection and Timely Filing of Claims...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Procedures for Curing Violations of the Due Diligence... Part 682 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Pt. 682, App. C...

Estimation of Fine and Oversize Particle Ratio in a Heterogeneous Compound with Acoustic Emissions.

PubMed

Nsugbe, Ejay; Ruiz-Carcel, Cristobal; Starr, Andrew; Jennions, Ian

2018-03-13

The final phase of powder production typically involves a mixing process where all of the particles are combined and agglomerated with a binder to form a single compound. The traditional means of inspecting the physical properties of the final product involves an inspection of the particle sizes using an offline sieving and weighing process. The main downside of this technique, in addition to being an offline-only measurement procedure, is its inability to characterise large agglomerates of powders due to sieve blockage. This work assesses the feasibility of a real-time monitoring approach using a benchtop test rig and a prototype acoustic-based measurement approach to provide information that can be correlated to product quality and provide the opportunity for future process optimisation. Acoustic emission (AE) was chosen as the sensing method due to its low cost, simple setup process, and ease of implementation. The performance of the proposed method was assessed in a series of experiments where the offline quality check results were compared to the AE-based real-time estimations using data acquired from a benchtop powder free flow rig. A designed time domain based signal processing method was used to extract particle size information from the acquired AE signal and the results show that this technique is capable of estimating the required ratio in the washing powder compound with an average absolute error of 6%.

Hot cracking of Structural Steel during Laser Welding

NASA Astrophysics Data System (ADS)

Pineda Huitron, Rosa M.; Vuorinen, Esa

2017-10-01

Laser welding is an important technique in many industries due to its high precision in operation, its local and fast processing, narrow welds and its good weld surface quality. However, the process can involve some complications due to the rapid heating and cooling of the material processed, resulting in physical and metallurgical effects as thermal contraction during solidification, giving as a result the presence of residual stresses in the narrow weld. Formation of defects during the process is an important topic to be evaluated in order to achieve better performance of the steels in use. In the present work, defects formed during laser welding of a structural steel have been investigated. The defects formed have been identified and the causes of the defects are discussed. Possible strategies for improvement of the welding procedure and final weld result are proposed. The defects were analysed by optical and scanning electron microscopy and hardness measurement. Cracks were located in the middle of the fusion zone and followed both inter-granular and trans-granular paths. Impurities as manganese sulphides were found along the welding direction, and could act as sites for crack formation. The cracks formed during solidification of the weld are identified as solidification cracks. This kind of cracks is usually caused by solidification shrinkage and thermal contractions during the process, which appear in the fusion zone and sometimes in the heat affected zone.

A Modified Subpulse SAR Processing Procedure Based on the Range-Doppler Algorithm for Synthetic Wideband Waveforms

PubMed Central

Lim, Byoung-Gyun; Woo, Jea-Choon; Lee, Hee-Young; Kim, Young-Soo

2008-01-01

Synthetic wideband waveforms (SWW) combine a stepped frequency CW waveform and a chirp signal waveform to achieve high range resolution without requiring a large bandwidth or the consequent very high sampling rate. If an efficient algorithm like the range-Doppler algorithm (RDA) is used to acquire the SAR images for synthetic wideband signals, errors occur due to approximations, so the images may not show the best possible result. This paper proposes a modified subpulse SAR processing algorithm for synthetic wideband signals which is based on RDA. An experiment with an automobile-based SAR system showed that the proposed algorithm is quite accurate with a considerable improvement in resolution and quality of the obtained SAR image. PMID:27873984

Effect of Soil Washing for Lead and Zinc Removal on Soil Hydraulic Properties

NASA Astrophysics Data System (ADS)

Kammerer, Gerhard; Zupanc, Vesna; Gluhar, Simon; Lestan, Domen

2017-04-01

Soil washing as a metal pollution remediation process, especially part with intensive mixing of the soil slurry and soil compression after de-watering, significantly deteriorates physical properties of soil compared to those of non-remediated soil. Furthermore, changed physical characteristics of remediated soil influence interaction of plant roots with soil system and affect soil water regime. Remediated soils showed significant differences to their original state in water retention properties and changed structure due to the influence of artificial structure created during remediation process. Disturbed and undisturbed soil samples of remediated and original soils were analyzed. We evaluated soil hydraulic properties as a possible constraint for re-establishing soil structure and soil fertility after the remediation procedure.

Storage method, drying processes and extraction procedures strongly affect the phenolic fraction of rosemary leaves: an HPLC/DAD/MS study.

PubMed

Mulinacci, N; Innocenti, M; Bellumori, M; Giaccherini, C; Martini, V; Michelozzi, M

2011-07-15

The Rosmarinus officinalis L. is widely known for its numerous applications in the food field but also for the increasing interest in its pharmaceutical properties. Two groups of compounds are mainly responsible for the biological activities of the plant: the volatile fraction and the phenolic constituents. The latter group is mainly constituted by rosmarinic acid, by a flavonoidic fraction and by some diterpenoid compounds structurally derived from the carnosic acid. The aim of our work was to optimize the extractive and analytical procedure for the determination of all the phenolic constituents. Moreover the chemical stability of the main phenols, depending on the storage condition, the different drying procedures and the extraction solvent, have been evaluated. This method allowed to detect up to 29 different constituents at the same time in a relatively short time. The described procedure has the advantage to being able to detect and quantify several classes of compounds, among them numerous minor flavonoids, thus contributing to improving knowledge of the plant. The findings from this study have demonstrated that storing the raw fresh material in the freezer is not appropriate for rosemary, mainly due to the rapid disappearing of the rosmarinic acid during the freezing/thawing process. Regarding the flavonoidic fraction, consistent decrements, were highlighted in the dried samples at room temperature if compared with the fresh leaf. Rosmarinic acid, appeared very sensitive also to mild drying processes. The total diterpenoidic content undergoes to little changes when the leaves are freeze dried or frozen and limited losses are observed working on dried leaves at room temperature. Nevertheless it can be taken in account that this fraction is very sensitive to the water presence during the extraction that favors the conversion of carnosic acid toward it oxidized form carnosol. From our findings, it appear evident that when evaluating the phenolic content in rosemary leaves, several factors, mainly the type of storage, the drying process and the extraction methods, should be carefully taken into account because they can induce partial losses of the antioxidant components. Copyright © 2011 Elsevier B.V. All rights reserved.

Recognising safety critical events: can automatic video processing improve naturalistic data analyses?

PubMed

Dozza, Marco; González, Nieves Pañeda

2013-11-01

New trends in research on traffic accidents include Naturalistic Driving Studies (NDS). NDS are based on large scale data collection of driver, vehicle, and environment information in real world. NDS data sets have proven to be extremely valuable for the analysis of safety critical events such as crashes and near crashes. However, finding safety critical events in NDS data is often difficult and time consuming. Safety critical events are currently identified using kinematic triggers, for instance searching for deceleration below a certain threshold signifying harsh braking. Due to the low sensitivity and specificity of this filtering procedure, manual review of video data is currently necessary to decide whether the events identified by the triggers are actually safety critical. Such reviewing procedure is based on subjective decisions, is expensive and time consuming, and often tedious for the analysts. Furthermore, since NDS data is exponentially growing over time, this reviewing procedure may not be viable anymore in the very near future. This study tested the hypothesis that automatic processing of driver video information could increase the correct classification of safety critical events from kinematic triggers in naturalistic driving data. Review of about 400 video sequences recorded from the events, collected by 100 Volvo cars in the euroFOT project, suggested that drivers' individual reaction may be the key to recognize safety critical events. In fact, whether an event is safety critical or not often depends on the individual driver. A few algorithms, able to automatically classify driver reaction from video data, have been compared. The results presented in this paper show that the state of the art subjective review procedures to identify safety critical events from NDS can benefit from automated objective video processing. In addition, this paper discusses the major challenges in making such video analysis viable for future NDS and new potential applications for NDS video processing. As new NDS such as SHRP2 are now providing the equivalent of five years of one vehicle data each day, the development of new methods, such as the one proposed in this paper, seems necessary to guarantee that these data can actually be analysed. Copyright © 2013 Elsevier Ltd. All rights reserved.

10 CFR 765.22 - Appeals procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Appeals procedures. 765.22 Section 765.22 Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.22 Appeals procedures. (a) Any...

10 CFR 765.22 - Appeals procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Appeals procedures. 765.22 Section 765.22 Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.22 Appeals procedures. (a) Any...

10 CFR 765.22 - Appeals procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Appeals procedures. 765.22 Section 765.22 Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.22 Appeals procedures. (a) Any...

10 CFR 765.22 - Appeals procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Appeals procedures. 765.22 Section 765.22 Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.22 Appeals procedures. (a) Any...

10 CFR 765.22 - Appeals procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Appeals procedures. 765.22 Section 765.22 Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Procedures for Submitting and Processing Reimbursement Claims § 765.22 Appeals procedures. (a) Any...

47 CFR 22.921 - 911 call processing procedures; 911-only calling mode.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false 911 call processing procedures; 911-only... CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.921 911 call processing procedures; 911-only calling mode. Mobile telephones manufactured after February 13, 2000 that are capable of...

47 CFR 22.921 - 911 call processing procedures; 911-only calling mode.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false 911 call processing procedures; 911-only... CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.921 911 call processing procedures; 911-only calling mode. Mobile telephones manufactured after February 13, 2000 that are capable of...

76 FR 13300 - Procedures for Submitting to the Department of Energy Trade Secrets and Commercial or Financial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

... procedures DOE uses to process loan applications submitted to DOE's Advanced Technology Vehicles... procedures DOE uses to process loan applications submitted to DOE's Advanced Technology Vehicles... requirements as described above for any information submitted through the Title XVII loan application process...

76 FR 54528 - Standard Operating Procedures (SOP) of the Aircraft Certification Service (AIR) Process for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

...) of the Aircraft Certification Service (AIR) Process for the Sequencing of Certification and... on the Aircraft Certification Service (AIR) standard operating procedure (SOP) describing the process... comments on the SOP : AIR-100-001; Standard Operating Procedure--Aircraft Certification Service Project...

28 CFR 34.102 - Peer review procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” describes a process that evolves in accordance with experience and opportunities to effect improvements. The... Review § 34.102 Peer review procedures. The OJJDP peer review process is contained in an OJJDP “Peer... substantive and procedural matters related to the peer review process, the “Guideline” addresses such issues...

Field guide for collecting and processing stream-water samples for the National Water-Quality Assessment Program

USGS Publications Warehouse

Shelton, Larry R.

1994-01-01

The U.S. Geological Survey's National Water-Quality Assessment program includes extensive data- collection efforts to assess the quality of the Nations's streams. These studies require analyses of stream samples for major ions, nutrients, sediments, and organic contaminants. For the information to be comparable among studies in different parts of the Nation, consistent procedures specifically designed to produce uncontaminated samples for trace analysis in the laboratory are critical. This field guide describes the standard procedures for collecting and processing samples for major ions, nutrients, organic contaminants, sediment, and field analyses of conductivity, pH, alkalinity, and dissolved oxygen. Samples are collected and processed using modified and newly designed equipment made of Teflon to avoid contamination, including nonmetallic samplers (D-77 and DH-81) and a Teflon sample splitter. Field solid-phase extraction procedures developed to process samples for organic constituent analyses produce an extracted sample with stabilized compounds for more accurate results. Improvements to standard operational procedures include the use of processing chambers and capsule filtering systems. A modified collecting and processing procedure for organic carbon is designed to avoid contamination from equipment cleaned with methanol. Quality assurance is maintained by strict collecting and processing procedures, replicate sampling, equipment blank samples, and a rigid cleaning procedure using detergent, hydrochloric acid, and methanol.

[Total hip replacement in the G-DRG-system].

PubMed

Kaufmann, M M; Franz, D; Lassahn, C; Siebert, C H

2007-01-01

Due to the continuing increase in life expectancy, the ageing process of the German population in general and the high demands placed on activity levels and quality of life today, the demand for primary and secondary joint replacement surgery continues to increase. To distribute the economic and medical resources properly, while still making technical and surgical innovations available to a broad public, hospitals must be able to adequately finance these procedures with the help of the proper diagnosis related groups. The development of the German DRG-system over the past years, as well as the new calculation for the year 2006 are to be reviewed and analysed in this article with this in mind. An improvement in the degree of differentiation between the individual procedures can be documented. Whether or not these changes will ensure the long-term financial survival of the German health care system will remain to be seen.

Quantifying Adventitious Error in a Covariance Structure as a Random Effect

PubMed Central

Wu, Hao; Browne, Michael W.

2017-01-01

We present an approach to quantifying errors in covariance structures in which adventitious error, identified as the process underlying the discrepancy between the population and the structured model, is explicitly modeled as a random effect with a distribution, and the dispersion parameter of this distribution to be estimated gives a measure of misspecification. Analytical properties of the resultant procedure are investigated and the measure of misspecification is found to be related to the RMSEA. An algorithm is developed for numerical implementation of the procedure. The consistency and asymptotic sampling distributions of the estimators are established under a new asymptotic paradigm and an assumption weaker than the standard Pitman drift assumption. Simulations validate the asymptotic sampling distributions and demonstrate the importance of accounting for the variations in the parameter estimates due to adventitious error. Two examples are also given as illustrations. PMID:25813463

A manual for addressing ineffectiveness within a Corrective Action System and driving on-time dispositions

NASA Astrophysics Data System (ADS)

Mallari, Lawrence Anthony Castro

This project proposes a manual specifically for remedying an ineffective Corrective Action Request System for Company ABC by providing dispositions within the company's quality procedure. A Corrective Action Request System is a corrective action tool that provides a means for employees to engage in the process improvement, problem elimination cycle. At Company ABC, Corrective Action Recommendations (CARs) are not provided with timely dispositions; CARs are being ignored due to a lack of training and awareness of Company ABC's personnel and quality procedures. In this project, Company ABC's quality management software database is scrutinized to identify the number of delinquent, non-dispositioned CARs in 2014. These CARs are correlated with the number of nonconformances generated for the same issue while the CAR is still open. Using secondary data, the primary investigator finds that nonconformances are being remediated at the operational level. However, at the administrative level, CARS are being ignored and forgotten.

Progress in protein crystallography.

PubMed

Dauter, Zbigniew; Wlodawer, Alexander

2016-01-01

Macromolecular crystallography evolved enormously from the pioneering days, when structures were solved by "wizards" performing all complicated procedures almost by hand. In the current situation crystal structures of large systems can be often solved very effectively by various powerful automatic programs in days or hours, or even minutes. Such progress is to a large extent coupled to the advances in many other fields, such as genetic engineering, computer technology, availability of synchrotron beam lines and many other techniques, creating the highly interdisciplinary science of macromolecular crystallography. Due to this unprecedented success crystallography is often treated as one of the analytical methods and practiced by researchers interested in structures of macromolecules, but not highly competent in the procedures involved in the process of structure determination. One should therefore take into account that the contemporary, highly automatic systems can produce results almost without human intervention, but the resulting structures must be carefully checked and validated before their release into the public domain.

[Unconscious induction of emotions and unintended change in behavior].

PubMed

Sokolowski, K

1992-01-01

The problem of most mood induction procedures in psychological laboratories is located in their demand characteristics. The subjects either have to help change their mood actively, or are at best only passively aware of the induction process. To overcome the necessity of consciousness of the mood induction procedure we developed a technique based on the involuntary tendency to imitate the expression of perceived faces ("emotional infection"). Three different mood induction conditions--operationalized by means of happy, neutral, or sad pairs of faces, which had to be compared in spite of their age--were imbedded in an experiment disguised as, research in perception'. The results show mood influences only in the behavioral measures: Happy induced subjects wrote significantly faster than neutral and sad ones. In contrast, the self description data--measured via mood adjectives--showed no typical changes due to the induction condition. The subjects seemed to be unaware of the cause and the effect of their changed mood.

[The risk of direct current countershock].

PubMed

Gajek, J; Zyśko, D

2001-07-01

Direct current cardioversion (DCC) is a procedure commonly used to restore the sinus rhythm in patients with supraventricular and ventricular arrhythmias. Its safety, regarding the use of electric current, is still a matter of controversy and debate. The patients with atrial fibrillation/flutter, supraventricular or ventricular tachycardia represent a broad spectrum of clinical conditions and it is difficult to draw the conclusions. The high success rate of DCC in restoring the sinus rhythm, may be partly responsible for enhancing and revealing proarrhythmic properties of antiarrhythmic drugs. The deaths described as a complications of DCC were mainly due to the proarrhythmia and less common to the progression of the pathologic process. The embolic, arrhythmic and anesthetic complications of DCC can be prevented if the known recommendations of performing the DCC are followed. The authors review critically the literature data about the complications of the procedure and come to the conclusion of safety of DCC.

High-speed video capillaroscopy method for imaging and evaluation of moving red blood cells

NASA Astrophysics Data System (ADS)

Gurov, Igor; Volkov, Mikhail; Margaryants, Nikita; Pimenov, Aleksei; Potemkin, Andrey

2018-05-01

The video capillaroscopy system with high image recording rate to resolve moving red blood cells with velocity up to 5 mm/s into a capillary is considered. Proposed procedures of the recorded video sequence processing allow evaluating spatial capillary area, capillary diameter and central line with high accuracy and reliability independently on properties of individual capillary. Two-dimensional inter frame procedure is applied to find lateral shift of neighbor images in the blood flow area with moving red blood cells and to measure directly the blood flow velocity along a capillary central line. The developed method opens new opportunities for biomedical diagnostics, particularly, due to long-time continuous monitoring of red blood cells velocity into capillary. Spatio-temporal representation of capillary blood flow is considered. Experimental results of direct measurement of blood flow velocity into separate capillary as well as capillary net are presented and discussed.

Cognitive Outcomes of Cardiovascular Surgical Procedures in the Old: An Important but Neglected Area.

PubMed

Keage, Hannah A D; Smith, Ashleigh; Loetscher, Tobias; Psaltis, Peter

2016-12-01

Older individuals can now undergo invasive cardiovascular procedures without serious concern about mortality, and the numbers and proportions of the over 65s and 85s doing so in Australia has been increasing over the last 20 years. There is overwhelming evidence linking cardiovascular conditions to late-life (65 years and over) cognitive impairment and dementia including Alzheimer's Disease, primarily due to impaired cerebrovascularisation and cascading neuropathological processes. Somewhat paradoxically, these cardiovascular interventions, carried out with the primary aim of revascularisation, are not usually associated with short- or long-term improvements in cognitive function in older adults. We discuss factors associated with cognitive outcomes post-cardiovascular surgeries in patients over 65 years of age. There are many opportunities for future research: we know almost nothing about cognitive outcomes following invasive cardiac procedures in the oldest old (85 years and over) nor how to predict the cognitive/delirium outcome using pre-surgical data, and lastly, intervention opportunities exist both pre and postoperatively that have not been tested. As our population ages with increased cardiovascular burden and rates of cardiovascular interventions and surgeries, it is critical that we understand the cognitive consequences of these procedures, who is at greatest risk, and ways to optimise cognition. Copyright © 2016. Published by Elsevier B.V.

Supporting Self-management of Chronic Pain

ClinicalTrials.gov

2018-04-04

Chronic Pain Syndrome; Chronic Pain; Chronic Pain Due to Injury; Chronic Pain Due to Trauma; Chronic Pain Due to Malignancy (Finding); Chronic Pain Post-Procedural; Chronic Pain Hip; Chronic Pain, Widespread

Operating room data management: improving efficiency and safety in a surgical block.

PubMed

Agnoletti, Vanni; Buccioli, Matteo; Padovani, Emanuele; Corso, Ruggero M; Perger, Peter; Piraccini, Emanuele; Orelli, Rebecca Levy; Maitan, Stefano; Dell'amore, Davide; Garcea, Domenico; Vicini, Claudio; Montella, Teresa Maria; Gambale, Giorgio

2013-03-11

European Healthcare Systems are facing a difficult period characterized by increasing costs and spending cuts due to economic problems. There is the urgent need for new tools which sustain Hospitals decision makers work. This project aimed to develop a data recording system of the surgical process of every patient within the operating theatre. The primary goal was to create a practical and easy data processing tool to give hospital managers, anesthesiologists and surgeons the information basis to increase operating theaters efficiency and patient safety. The developed data analysis tool is embedded in an Oracle Business Intelligence Environment, which processes data to simple and understandable performance tachometers and tables. The underlying data analysis is based on scientific literature and the projects teams experience with tracked data. The system login is layered and different users have access to different data outputs depending on their professional needs. The system is divided in the tree profile types Manager, Anesthesiologist and Surgeon. Every profile includes subcategories where operators can access more detailed data analyses. The first data output screen shows general information and guides the user towards more detailed data analysis. The data recording system enabled the registration of 14.675 surgical operations performed from 2009 to 2011. Raw utilization increased from 44% in 2009 to 52% in 2011. The number of high complexity surgical procedures (≥120 minutes) has increased in certain units while decreased in others. The number of unscheduled procedures performed has been reduced (from 25% in 2009 to 14% in 2011) while maintaining the same percentage of surgical procedures. The number of overtime events decreased in 2010 (23%) and in 2011 (21%) compared to 2009 (28%) and the delays expressed in minutes are almost the same (mean 78 min). The direct link found between the complexity of surgical procedures, the number of unscheduled procedures and overtime show a positive impact of the project on OR management. Despite a consistency in the complexity of procedures (19% in 2009 and 21% in 2011), surgical groups have been successful in reducing the number of unscheduled procedures (from 25% in 2009 to 14% in 2011) and overtime (from 28% in 2009 to 21% in 2011). The developed project gives healthcare managers, anesthesiologists and surgeons useful information to increase surgical theaters efficiency and patient safety. In difficult economic times is possible to develop something that is of some value to the patient and healthcare system too.

Operating room data management: improving efficiency and safety in a surgical block

PubMed Central

2013-01-01

Background European Healthcare Systems are facing a difficult period characterized by increasing costs and spending cuts due to economic problems. There is the urgent need for new tools which sustain Hospitals decision makers work. This project aimed to develop a data recording system of the surgical process of every patient within the operating theatre. The primary goal was to create a practical and easy data processing tool to give hospital managers, anesthesiologists and surgeons the information basis to increase operating theaters efficiency and patient safety. Methods The developed data analysis tool is embedded in an Oracle Business Intelligence Environment, which processes data to simple and understandable performance tachometers and tables. The underlying data analysis is based on scientific literature and the projects teams experience with tracked data. The system login is layered and different users have access to different data outputs depending on their professional needs. The system is divided in the tree profile types Manager, Anesthesiologist and Surgeon. Every profile includes subcategories where operators can access more detailed data analyses. The first data output screen shows general information and guides the user towards more detailed data analysis. The data recording system enabled the registration of 14.675 surgical operations performed from 2009 to 2011. Results Raw utilization increased from 44% in 2009 to 52% in 2011. The number of high complexity surgical procedures (≥120 minutes) has increased in certain units while decreased in others. The number of unscheduled procedures performed has been reduced (from 25% in 2009 to 14% in 2011) while maintaining the same percentage of surgical procedures. The number of overtime events decreased in 2010 (23%) and in 2011 (21%) compared to 2009 (28%) and the delays expressed in minutes are almost the same (mean 78 min). The direct link found between the complexity of surgical procedures, the number of unscheduled procedures and overtime show a positive impact of the project on OR management. Despite a consistency in the complexity of procedures (19% in 2009 and 21% in 2011), surgical groups have been successful in reducing the number of unscheduled procedures (from 25% in 2009 to 14% in 2011) and overtime (from 28% in 2009 to 21% in 2011). Conclusions The developed project gives healthcare managers, anesthesiologists and surgeons useful information to increase surgical theaters efficiency and patient safety. In difficult economic times is possible to develop something that is of some value to the patient and healthcare system too. PMID:23496977

Configural and component processing in simultaneous and sequential lineup procedures.

PubMed

Flowe, Heather D; Smith, Harriet M J; Karoğlu, Nilda; Onwuegbusi, Tochukwu O; Rai, Lovedeep

2016-01-01

Configural processing supports accurate face recognition, yet it has never been examined within the context of criminal identification lineups. We tested, using the inversion paradigm, the role of configural processing in lineups. Recent research has found that face discrimination accuracy in lineups is better in a simultaneous compared to a sequential lineup procedure. Therefore, we compared configural processing in simultaneous and sequential lineups to examine whether there are differences. We had participants view a crime video, and then they attempted to identify the perpetrator from a simultaneous or sequential lineup. The test faces were presented either upright or inverted, as previous research has shown that inverting test faces disrupts configural processing. The size of the inversion effect for faces was the same across lineup procedures, indicating that configural processing underlies face recognition in both procedures. Discrimination accuracy was comparable across lineup procedures in both the upright and inversion condition. Theoretical implications of the results are discussed.

Item response theory - A first approach

NASA Astrophysics Data System (ADS)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Operational Control Procedures for the Activated Sludge Process, Part III-A: Calculation Procedures.

ERIC Educational Resources Information Center

West, Alfred W.

This is the second in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals exclusively with the calculation procedures, including simplified mixing formulas, aeration tank…

Processing single-use medical devices for use in surgery - importance, status quo and potential.

PubMed

Krüger, Colin M

2008-09-03

In summary, it is possible with the technology and scientific knowledge currently available to allow products intended for single use to be reprocessed using validated and certified processing procedures, while maintaining the full function and without any loss in quality. How many times a product can be re-processed must be determined separately for each individual medical technology device; it is not possible to make any kind of blanket statement as to the permissible number of cycles. This is due to the differing construction, the various combinations of materials and the diverse demands made of each device during clinical use. The exigency of the reprocessing issue is evident both to the user and the primary manufacturer. For the user, where there is a correspondingly high-quality primary product with suitably costed, technically-sound and certified reprocessing procedures, repeat usage can mean real savings while maintaining full functionality in each use. For the primary manufacturers of highly specialised instruments, only part of which can be represented by the medical facility in terms of a corresponding DRG (Diagnosis-Related Group), it is reprocessing that opens the door to widespread routine clinical use. The patient, in turn, benefits greatly from this, since his demand for medical treatment using the most up-to-date technology is taken into account. If processing complies in full with medical technology and hygiene directives, from the medical point of view (without being able to definitively evaluate each individual case using this criterion) the specific advantages of the reprocessing procedure are obvious. In order to establish broad acceptance for the purposes of good marketing, corresponding controlling and quality instruments have to be developed to allow the decision-making process regarding the permissibility of the reprocessing of a certain device and the number of times it can be reprocessed using this procedure to be made transparent.Taking this a step further, possibilities arise for the establishment of corresponding quality-assurance instruments on the part of the clinical establishments involved, within which reprocessed products, in the interest of quality assurance, can be referred back to the processor in the event of defective function and can also be removed from clinical use prior to completing the intended number of processing cycles. Furthermore, it can be assumed that the widespread use of reprocessing procedures in today's high-cost single-use medical device sector will have a long-term cost/price-regulating effect for the primary products, to the benefit of the users. Thus, the heated debate regarding the safety of processing procedures that have already been certified and validated in accordance with current industry standards should be evaluated in particular from the point of view of the justified fears of the leading manufacturers with regard to their currently established market share. From a purely surgical point of view, the reprocessing of disposable products should be welcomed as a revolution. The main criteria for surgeons and medics should always be the benefit for the patient. If the quality is ensured through corresponding processing and validation procedures based on recognised certificates, then economic arguments take precedence. Cases in which a DRG (and thus a payment calculation) does not fully cover the use of medical devices are conceivable. Withholding medically necessary services on grounds of the costs, or making these services available to a limited extent only, is not acceptable from the medical point of view and furthermore goes beyond what is ethically acceptable. Each procedure, even the systematic use of reprocessing of suitable medical technology disposable items, should, where the quality is guaranteed, be supported unequivocally. Taken a step further, this branch of the economy will have a long-lasting price-regulating effect on the primary producers market.

Transition Process of Procedural to Conceptual Understanding in Solving Mathematical Problems

ERIC Educational Resources Information Center

Fatqurhohman

2016-01-01

This article aims to describe the transition process from procedural understanding to conceptual understanding in solving mathematical problems. Subjects in this study were three students from 20 fifth grade students of SDN 01 Sumberberas Banyuwangi selected based on the results of the students' answers. The transition process from procedural to…

Apollo experience report: Systems and flight procedures development

NASA Technical Reports Server (NTRS)

Kramer, P. C.

1973-01-01

This report describes the process of crew procedures development used in the Apollo Program. The two major categories, Systems Procedures and Flight Procedures, are defined, as are the forms of documentation required. A description is provided of the operation of the procedures change control process, which includes the roles of man-in-the-loop simulations and the Crew Procedures Change Board. Brief discussions of significant aspects of the attitude control, computer, electrical power, environmental control, and propulsion subsystems procedures development are presented. Flight procedures are subdivided by mission phase: launch and translunar injection, rendezvous, lunar descent and ascent, and entry. Procedures used for each mission phase are summarized.

34 CFR 674.45 - Collection procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false Collection procedures. 674.45 Section 674.45 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.45 Collection procedures. (a) The...

34 CFR 674.43 - Billing procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false Billing procedures. 674.43 Section 674.43 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.43 Billing procedures. (a) The term...

34 CFR 674.46 - Litigation procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Litigation procedures. 674.46 Section 674.46 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.46 Litigation procedures. (a)(1) If...

34 CFR 674.43 - Billing procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Billing procedures. 674.43 Section 674.43 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.43 Billing procedures. (a) The term...

34 CFR 674.45 - Collection procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Collection procedures. 674.45 Section 674.45 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.45 Collection procedures. (a) The...

Operational and Medical Procedures for a Declared Contingency Shuttle (CSCS) Shuttle Mission Due to a Failure that Precludes a Safe Return

NASA Technical Reports Server (NTRS)

Adams, Adrien; Patlach, Bob; Duchense, Ted; Chandler, Mike; Stepaniak, Philip C.

2011-01-01

This poster paper outlines the operational and medical procedures for a shuttle mission that has a failure that precludes a safe return to Earth. Information about the assumptions, procedures and limiting consumables is included.

Application of transient CFD-procedures for S-shape computation in pump-turbines with and without FSI

NASA Astrophysics Data System (ADS)

Casartelli, E.; Mangani, L.; Ryan, O.; Schmid, A.

2016-11-01

CFD has entered the product development process in hydraulic machines since more than three decades. Beside the actual design process, in which the most appropriate geometry for a certain task is iteratively sought, several steady-state simulations and related analyses are performed with the help of CFD. Basic transient CFD-analysis is becoming more and more routine for rotor-stator interaction assessment, but in general unsteady CFD is still not standard due to the large computational effort. Especially for FSI simulations, where mesh motion is involved, a considerable amount of computational time is necessary for the mesh handling and deformation as well as the related unsteady flow field resolution. Therefore this kind of CFD computations are still unusual and mostly performed during trouble-shooting analysis rather than in the standard development process, i.e. in order to understand what went wrong instead of preventing failure or even better to increase the available knowledge. In this paper the application of an efficient and particularly robust algorithm for fast computations with moving mesh is presented for the analysis of transient effects encountered during highly dynamic procedures in the operation of a pump-turbine, like runaway at fixed GV position and load-rejection with GV motion imposed as one-way FSI. In both cases the computations extend through the S-shape of the machine in the turbine-brake and reverse pump domain, showing that such exotic computations can be perform on a more regular base, even if quite time consuming. Beside the presentation of the procedure and global results, some highlights in the encountered flow-physics are also given.

A semi-automated image analysis procedure for in situ plankton imaging systems.

PubMed

Bi, Hongsheng; Guo, Zhenhua; Benfield, Mark C; Fan, Chunlei; Ford, Michael; Shahrestani, Suzan; Sieracki, Jeffery M

2015-01-01

Plankton imaging systems are capable of providing fine-scale observations that enhance our understanding of key physical and biological processes. However, processing the large volumes of data collected by imaging systems remains a major obstacle for their employment, and existing approaches are designed either for images acquired under laboratory controlled conditions or within clear waters. In the present study, we developed a semi-automated approach to analyze plankton taxa from images acquired by the ZOOplankton VISualization (ZOOVIS) system within turbid estuarine waters, in Chesapeake Bay. When compared to images under laboratory controlled conditions or clear waters, images from highly turbid waters are often of relatively low quality and more variable, due to the large amount of objects and nonlinear illumination within each image. We first customized a segmentation procedure to locate objects within each image and extracted them for classification. A maximally stable extremal regions algorithm was applied to segment large gelatinous zooplankton and an adaptive threshold approach was developed to segment small organisms, such as copepods. Unlike the existing approaches for images acquired from laboratory, controlled conditions or clear waters, the target objects are often the majority class, and the classification can be treated as a multi-class classification problem. We customized a two-level hierarchical classification procedure using support vector machines to classify the target objects (< 5%), and remove the non-target objects (> 95%). First, histograms of oriented gradients feature descriptors were constructed for the segmented objects. In the first step all non-target and target objects were classified into different groups: arrow-like, copepod-like, and gelatinous zooplankton. Each object was passed to a group-specific classifier to remove most non-target objects. After the object was classified, an expert or non-expert then manually removed the non-target objects that could not be removed by the procedure. The procedure was tested on 89,419 images collected in Chesapeake Bay, and results were consistent with visual counts with >80% accuracy for all three groups.

A Semi-Automated Image Analysis Procedure for In Situ Plankton Imaging Systems

PubMed Central

Bi, Hongsheng; Guo, Zhenhua; Benfield, Mark C.; Fan, Chunlei; Ford, Michael; Shahrestani, Suzan; Sieracki, Jeffery M.

2015-01-01

Plankton imaging systems are capable of providing fine-scale observations that enhance our understanding of key physical and biological processes. However, processing the large volumes of data collected by imaging systems remains a major obstacle for their employment, and existing approaches are designed either for images acquired under laboratory controlled conditions or within clear waters. In the present study, we developed a semi-automated approach to analyze plankton taxa from images acquired by the ZOOplankton VISualization (ZOOVIS) system within turbid estuarine waters, in Chesapeake Bay. When compared to images under laboratory controlled conditions or clear waters, images from highly turbid waters are often of relatively low quality and more variable, due to the large amount of objects and nonlinear illumination within each image. We first customized a segmentation procedure to locate objects within each image and extracted them for classification. A maximally stable extremal regions algorithm was applied to segment large gelatinous zooplankton and an adaptive threshold approach was developed to segment small organisms, such as copepods. Unlike the existing approaches for images acquired from laboratory, controlled conditions or clear waters, the target objects are often the majority class, and the classification can be treated as a multi-class classification problem. We customized a two-level hierarchical classification procedure using support vector machines to classify the target objects (< 5%), and remove the non-target objects (> 95%). First, histograms of oriented gradients feature descriptors were constructed for the segmented objects. In the first step all non-target and target objects were classified into different groups: arrow-like, copepod-like, and gelatinous zooplankton. Each object was passed to a group-specific classifier to remove most non-target objects. After the object was classified, an expert or non-expert then manually removed the non-target objects that could not be removed by the procedure. The procedure was tested on 89,419 images collected in Chesapeake Bay, and results were consistent with visual counts with >80% accuracy for all three groups. PMID:26010260

Concurrent changes in aggregation and swelling of coal particles in solvents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishioka, M.

1995-12-31

A new method of coal swelling has been developed tinder the condition of low coal concentrations with continuous mixing of coal and solvent. The change in particle size distributions by a laser scattering procedure was used for the evaluation of coal swelling. Particle size distributions in good and poor solvents were nearly equal, but reversibly changed in good solvents from time to time. The effects of solubles and coal concentrations on the distributions were small. It was concluded that aggregate d coal particles disaggregate in good solvents, and that an increase in the particle size distribution due to swelling inmore » good solvents are compensated by a decrease in the particle size due to disaggregation. Therefore, the behavior of coal particles in solvents is controlled by aggregation in addition to coal swelling. This implies that an increase in the particle size due to coal swelling in actual processes is not so large as expected by the results obtained from the conventional coal swelling methods.« less

Adaptive kernel independent component analysis and UV spectrometry applied to characterize the procedure for processing prepared rhubarb roots.

PubMed

Wang, Guoqing; Hou, Zhenyu; Peng, Yang; Wang, Yanjun; Sun, Xiaoli; Sun, Yu-an

2011-11-07

By determination of the number of absorptive chemical components (ACCs) in mixtures using median absolute deviation (MAD) analysis and extraction of spectral profiles of ACCs using kernel independent component analysis (KICA), an adaptive KICA (AKICA) algorithm was proposed. The proposed AKICA algorithm was used to characterize the procedure for processing prepared rhubarb roots by resolution of the measured mixed raw UV spectra of the rhubarb samples that were collected at different steaming intervals. The results show that the spectral features of ACCs in the mixtures can be directly estimated without chemical and physical pre-separation and other prior information. The estimated three independent components (ICs) represent different chemical components in the mixtures, which are mainly polysaccharides (IC1), tannin (IC2), and anthraquinone glycosides (IC3). The variations of the relative concentrations of the ICs can account for the chemical and physical changes during the processing procedure: IC1 increases significantly before the first 5 h, and is nearly invariant after 6 h; IC2 has no significant changes or is slightly decreased during the processing procedure; IC3 decreases significantly before the first 5 h and decreases slightly after 6 h. The changes of IC1 can explain why the colour became black and darkened during the processing procedure, and the changes of IC3 can explain why the processing procedure can reduce the bitter and dry taste of the rhubarb roots. The endpoint of the processing procedure can be determined as 5-6 h, when the increasing or decreasing trends of the estimated ICs are insignificant. The AKICA-UV method provides an alternative approach for the characterization of the processing procedure of rhubarb roots preparation, and provides a novel way for determination of the endpoint of the traditional Chinese medicine (TCM) processing procedure by inspection of the change trends of the ICs.

Interaction Effects of Acute Kidney Injury, Acute Respiratory Failure, and Sepsis on 30-Day Postoperative Mortality in Patients Undergoing High-Risk Intraabdominal General Surgical Procedures.

PubMed

Kim, Minjae; Brady, Joanne E; Li, Guohua

2015-12-01

Acute kidney injury (AKI), acute respiratory failure, and sepsis are distinct but related pathophysiologic processes. We hypothesized that these 3 processes may interact to synergistically increase the risk of short-term perioperative mortality in patients undergoing high-risk intraabdominal general surgery procedures. We performed a retrospective, observational cohort study of data (2005-2011) from the American College of Surgeons-National Surgical Quality Improvement Program, a high-quality surgical outcomes data set. High-risk procedures were those with a risk of AKI, acute respiratory failure, or sepsis greater than the average risk in all intraabdominal general surgery procedures. The effects of AKI, acute respiratory failure, and sepsis on 30-day mortality were assessed using a Cox proportional hazards model. Additive interactions were assessed with the relative excess risk due to interaction. Of 217,994 patients, AKI, acute respiratory failure, and sepsis developed in 1.3%, 3.7%, and 6.8%, respectively. The 30-day mortality risk with sepsis, acute respiratory failure, and AKI were 11.4%, 24.1%, and 25.1%, respectively, compared with 0.85% without these complications. The adjusted hazard ratios and 95% confidence intervals for a single complication (versus no complication) on mortality were 7.24 (6.46-8.11), 10.8 (8.56-13.6), and 14.2 (12.8-15.7) for sepsis, AKI, and acute respiratory failure, respectively. For 2 complications, the adjusted hazard ratios were 30.8 (28.0-33.9), 42.6 (34.3-52.9), and 65.2 (53.9-78.8) for acute respiratory failure/sepsis, AKI/sepsis, and acute respiratory failure/AKI, respectively. Finally, the adjusted hazard ratio for all 3 complications was 105 (92.8-118). Positive additive interactions, indicating synergism, were found for each combination of 2 complications. The relative excess risk due to interaction for all 3 complications was not statistically significant. In high-risk general surgery patients, the development of AKI, acute respiratory failure, or sepsis is independently associated with an increase in 30-day mortality. In addition, the development of 2 complications shows significant positive additive interactions to further increase the risk of mortality. Our findings suggest that interactions between these 3 perioperative complications increase the risk of mortality more than would be expected by the independent effects of each complication alone.

Experience of microbiological screening of human hepatocytes for clinical transplantation.

PubMed

Lehec, Sharon C; Hughes, Robin D; Mitry, Ragai R; Graver, Michelle A; Verma, Anita; Wade, Jim J; Dhawan, Anil

2009-01-01

Hepatocyte transplantation is being used in patients with liver-based metabolic disorders and acute liver failure. Hepatocytes are isolated from unused donor liver tissue under GMP conditions. Cells must be free of microbiological contamination to be safe for human use. The experience of microbiological screening during 72 hepatocyte isolation procedures at one center is reported. Samples were taken at different stages of the process and tested using a blood culture bottle system and Gram stain. Bacterial contamination was detected in 37.5% of the UW organ preservative solutions used to transport the liver tissue to the Cell Isolation Unit. After tissue processing the contamination was reduced to 7% overall in the final hepatocyte product, irrespective of the presence of initial contamination of the transport solution. The most common organisms recovered were coagulase-negative staphylococci, a skin commensal. A total of 41 preparations of fresh or cryopreserved hepatocytes were used for cell transplantation in children with liver-based metabolic disorders without any evidence of sepsis due to infusion of hepatocytes. In conclusion, the incidence of bacterial contamination of the final product was low, confirming the suitability of the organs used, hepatocyte isolation procedure, and the environmental conditions of the clean room.

Analysis of pulsed injection for microgravity receiver tank chilldown

NASA Astrophysics Data System (ADS)

Honkonen, Scott C.; Pietrzyk, Joe R.; Schuster, John R.

The dominant heat transfer mechanism during the hold phase of a tank chilldown cycle in a low-gravity environment is due to fluid motion persistence following the charge. As compared to the single-charge per vent cycle case, pulsed injection maintains fluid motion and the associated high wall heat transfer coefficients during the hold phase. As a result, the pulsed injection procedure appears to be an attractive method for reducing the time and liquid mass required to chill a tank. However, for the representative conditions considered, no significant benefit can be realized by using pulsed injection as compared to the single-charge case. A numerical model of the charge/hold/vent process was used to evaluate the pulsed injection procedure for tank chilldown in microgravity. Pulsed injection results in higher average wall heat transfer coefficients during the hold, as compared to the single-charge case. However, these high levels were not coincident with the maximum wall-to-fluid temperature differences, as in the single-charge case. For representative conditions investigated, the charge/hold/vent process is very efficient. A slightly shorter chilldown time was realized by increasing the number of pulses.

Assessing denoising strategies to increase signal to noise ratio in spinal cord and in brain cortical and subcortical regions

NASA Astrophysics Data System (ADS)

Maugeri, L.; Moraschi, M.; Summers, P.; Favilla, S.; Mascali, D.; Cedola, A.; Porro, C. A.; Giove, F.; Fratini, M.

2018-02-01

Functional Magnetic Resonance Imaging (fMRI) based on Blood Oxygenation Level Dependent (BOLD) contrast has become one of the most powerful tools in neuroscience research. On the other hand, fMRI approaches have seen limited use in the study of spinal cord and subcortical brain regions (such as the brainstem and portions of the diencephalon). Indeed obtaining good BOLD signal in these areas still represents a technical and scientific challenge, due to poor control of physiological noise and to a limited overall quality of the functional series. A solution can be found in the combination of optimized experimental procedures at acquisition stage, and well-adapted artifact mitigation procedures in the data processing. In this framework, we studied two different data processing strategies to reduce physiological noise in cortical and subcortical brain regions and in the spinal cord, based on the aCompCor and RETROICOR denoising tools respectively. The study, performed in healthy subjects, was carried out using an ad hoc isometric motor task. We observed an increased signal to noise ratio in the denoised functional time series in the spinal cord and in the subcortical brain region.

Modeling solvent evaporation during thin film formation in phase separating polymer mixtures

DOE PAGES

Cummings, John; Lowengrub, John S.; Sumpter, Bobby G.; ...

2018-02-09

Preparation of thin films by dissolving polymers in a common solvent followed by evaporation of the solvent has become a routine processing procedure. However, modeling of thin film formation in an evaporating solvent has been challenging due to a need to simulate processes at multiple length and time scales. In this paper, we present a methodology based on the principles of linear non-equilibrium thermodynamics, which allows systematic study of various effects such as the changes in the solvent properties due to phase transformation from liquid to vapor and polymer thermodynamics resulting from such solvent transformations. The methodology allows for themore » derivation of evaporative flux and boundary conditions near each surface for simulations of systems close to the equilibrium. We apply it to study thin film microstructural evolution in phase segregating polymer blends dissolved in a common volatile solvent and deposited on a planar substrate. Finally, effects of the evaporation rates, interactions of the polymers with the underlying substrate and concentration dependent mobilities on the kinetics of thin film formation are studied.« less

Modeling solvent evaporation during thin film formation in phase separating polymer mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cummings, John; Lowengrub, John S.; Sumpter, Bobby G.

Preparation of thin films by dissolving polymers in a common solvent followed by evaporation of the solvent has become a routine processing procedure. However, modeling of thin film formation in an evaporating solvent has been challenging due to a need to simulate processes at multiple length and time scales. In this paper, we present a methodology based on the principles of linear non-equilibrium thermodynamics, which allows systematic study of various effects such as the changes in the solvent properties due to phase transformation from liquid to vapor and polymer thermodynamics resulting from such solvent transformations. The methodology allows for themore » derivation of evaporative flux and boundary conditions near each surface for simulations of systems close to the equilibrium. We apply it to study thin film microstructural evolution in phase segregating polymer blends dissolved in a common volatile solvent and deposited on a planar substrate. Finally, effects of the evaporation rates, interactions of the polymers with the underlying substrate and concentration dependent mobilities on the kinetics of thin film formation are studied.« less

Parameters of Solidifying Mixtures Transporting at Underground Ore Mining

NASA Astrophysics Data System (ADS)

Golik, Vladimir; Dmitrak, Yury

2017-11-01

The article is devoted to the problem of providing mining enterprises with solidifying filling mixtures at underground mining. The results of analytical studies using the data of foreign and domestic practice of solidifying mixtures delivery to stopes are given. On the basis of experimental practice the parameters of transportation of solidifying filling mixtures are given with an increase in their quality due to the effect of vibration in the pipeline. The mechanism of the delivery process and the procedure for determining the parameters of the forced oscillations of the pipeline, the characteristics of the transporting processes, the rigidity of the elastic elements of pipeline section supports and the magnitude of vibrator' driving force are detailed. It is determined that the quality of solidifying filling mixtures can be increased due to the rational use of technical resources during the transportation of mixtures, and as a result the mixtures are characterized by a more even distribution of the aggregate. The algorithm for calculating the parameters of the pipe vibro-transport of solidifying filling mixtures can be in demand in the design of mineral deposits underground mining technology.

Burst design and signal processing for the speed of sound measurement of fluids with the pulse-echo technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubberke, Frithjof H.; Baumhögger, Elmar; Vrabec, Jadran, E-mail: jadran.vrabec@upb.de

2015-05-15

The pulse-echo technique determines the propagation time of acoustic wave bursts in a fluid over a known propagation distance. It is limited by the signal quality of the received echoes of the acoustic wave bursts, which degrades with decreasing density of the fluid due to acoustic impedance and attenuation effects. Signal sampling is significantly improved in this work by burst design and signal processing such that a wider range of thermodynamic states can be investigated. Applying a Fourier transformation based digital filter on acoustic wave signals increases their signal-to-noise ratio and enhances their time and amplitude resolutions, improving the overallmore » measurement accuracy. In addition, burst design leads to technical advantages for determining the propagation time due to the associated conditioning of the echo. It is shown that the according operation procedure enlarges the measuring range of the pulse-echo technique for supercritical argon and nitrogen at 300 K down to 5 MPa, where it was limited to around 20 MPa before.« less

Sequential two-column electro-Fenton-photolytic reactor for the treatment of winery wastewater.

PubMed

Díez, A M; Sanromán, M A; Pazos, M

2017-01-01

The high amount of winery wastewaters produced each year makes their treatment a priority issue due to their problematic characteristics such as acid pH, high concentration of organic load and colourful compounds. Furthermore, some of these effluents can have dissolved pesticides, due to the previous grape treatments, which are recalcitrant to conventional treatments. Recently, photo-electro-Fenton process has been reported as an effective procedure to mineralize different organic contaminants and a promising technology for the treatment of these complex matrixes. However, the reactors available for applying this process are scarce and they show several limitations. In this study, a sequential two-column reactor for the photo-electro-Fenton treatment was designed and evaluated for the treatment of different pesticides, pirimicarb and pyrimethanil, used in wine production. Both studied pesticides were efficiently removed, and the transformation products were determined. Finally, the treatment of a complex aqueous matrix composed by winery wastewater and the previously studied pesticides was carried out in the designed sequential reactor. The high removals of TOC and COD reached and the low energy consumption demonstrated the efficiency of this new configuration.

Overview of the Regulatory Oversight Implemented by the French Regulatory Authorities for the Clinical Investigation of Gene Therapy and Cell Therapy Products.

PubMed

Lucas-Samuel, Sophie; Ferry, Nicolas; Trouvin, Jean-Hugues

2015-01-01

Advanced therapy medicinal products, a new class of products with promising therapeutic effects, have been classified as medicinal products and as such should be developed according to a well-structured development plan, to establish their quality, safety and efficacy profile and conclude, at the time of the marketing authorisation evaluation, on a positive risk/benefit balance for patients. An important part of this development plan is achieved through clinical trials, which have also to be approved according to a well-established regulatory process, prior any initiation. This chapter is dedicated to describe the regulatory pathway to be followed in France, before initiating any clinical trial with those investigational advanced therapy medicinal products. In France, to get the final authorisation to initiate a clinical trial, the legislation imposes to run in parallel two independent but complementary authorisation procedures. The first procedure is aimed at assessing the ethical aspect of the biomedical research, while the second has to review the safety and regulatory aspects. A third procedure has to be envisaged where in case the investigational product consists or contains a genetically modified organism. The French system herein described is in line with the EU regulation on clinical trial and follows the respective deadlines for granting the final approval. The complexity of the procedure is in fact more due to the complexity of the products and protocols to be assessed than to the procedure itself which is now very close to the well-known procedure applied routinely for more conventional chemical or biological candidate medicinal products.

Comparison of contamination of femoral heads and pre-processed bone chips during hip revision arthroplasty.

PubMed

Mathijssen, N M C; Sturm, P D; Pilot, P; Bloem, R M; Buma, P; Petit, P L; Schreurs, B W

2013-12-01

With bone impaction grafting, cancellous bone chips made from allograft femoral heads are impacted in a bone defect, which introduces an additional source of infection. The potential benefit of the use of pre-processed bone chips was investigated by comparing the bacterial contamination of bone chips prepared intraoperatively with the bacterial contamination of pre-processed bone chips at different stages in the surgical procedure. To investigate baseline contamination of the bone grafts, specimens were collected during 88 procedures before actual use or preparation of the bone chips: in 44 procedures intraoperatively prepared chips were used (Group A) and in the other 44 procedures pre-processed bone chips were used (Group B). In 64 of these procedures (32 using locally prepared bone chips and 32 using pre-processed bone chips) specimens were also collected later in the procedure to investigate contamination after use and preparation of the bone chips. In total, 8 procedures had one or more positive specimen(s) (12.5 %). Contamination rates were not significantly different between bone chips prepared at the operating theatre and pre-processed bone chips. In conclusion, there was no difference in bacterial contamination between bone chips prepared from whole femoral heads in the operating room and pre-processed bone chips, and therefore, both types of bone allografts are comparable with respect to risk of infection.

Operations of a spaceflight experiment to investigate plant tropisms

NASA Astrophysics Data System (ADS)

Kiss, John Z.; Kumar, Prem; Millar, Katherine D. L.; Edelmann, Richard E.; Correll, Melanie J.

2009-10-01

Plants will be an important component in bioregenerative systems for long-term missions to the Moon and Mars. Since gravity is reduced both on the Moon and Mars, studies that identify the basic mechanisms of plant growth and development in altered gravity are required to ensure successful plant production on these space colonization missions. To address these issues, we have developed a project on the International Space Station (ISS) to study the interaction between gravitropism and phototropism in Arabidopsis thaliana. These experiments were termed TROPI (for tropisms) and were performed on the European Modular Cultivation System (EMCS) in 2006. In this paper, we provide an operational summary of TROPI and preliminary results on studies of tropistic curvature of seedlings grown in space. Seed germination in TROPI was lower compared to previous space experiments, and this was likely due to extended storage in hardware for up to 8 months. Video downlinks provided an important quality check on the automated experimental time line that also was monitored with telemetry. Good quality images of seedlings were obtained, but the use of analog video tapes resulted in delays in image processing and analysis procedures. Seedlings that germinated exhibited robust phototropic curvature. Frozen plant samples were returned on three space shuttle missions, and improvements in cold stowage and handing procedures in the second and third missions resulted in quality RNA extracted from the seedlings that was used in subsequent microarray analyses. While the TROPI experiment had technical and logistical difficulties, most of the procedures worked well due to refinement during the project.

CT thermometry for cone-beam CT guided ablation

NASA Astrophysics Data System (ADS)

DeStefano, Zachary; Abi-Jaoudeh, Nadine; Li, Ming; Wood, Bradford J.; Summers, Ronald M.; Yao, Jianhua

2016-03-01

Monitoring temperature during a cone-beam CT (CBCT) guided ablation procedure is important for prevention of over-treatment and under-treatment. In order to accomplish ideal temperature monitoring, a thermometry map must be generated. Previously, this was attempted using CBCT scans of a pig shoulder undergoing ablation.1 We are extending this work by using CBCT scans of real patients and incorporating more processing steps. We register the scans before comparing them due to the movement and deformation of organs. We then automatically locate the needle tip and the ablation zone. We employ a robust change metric due to image noise and artifacts. This change metric takes windows around each pixel and uses an equation inspired by Time Delay Analysis to calculate the error between windows with the assumption that there is an ideal spatial offset. Once the change map is generated, we correlate change data with measured temperature data at the key points in the region. This allows us to transform our change map into a thermal map. This thermal map is then able to provide an estimate as to the size and temperature of the ablation zone. We evaluated our procedure on a data set of 12 patients who had a total of 24 ablation procedures performed. We were able to generate reasonable thermal maps with varying degrees of accuracy. The average error ranged from 2.7 to 16.2 degrees Celsius. In addition to providing estimates of the size of the ablation zone for surgical guidance, 3D visualizations of the ablation zone and needle are also produced.

Revision for prosthetic joint infection following hip arthroplasty: Evidence from the National Joint Registry.

PubMed

Lenguerrand, E; Whitehouse, M R; Beswick, A D; Jones, S A; Porter, M L; Blom, A W

2017-06-01

We used the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man (NJR) to investigate the risk of revision due to prosthetic joint infection (PJI) for patients undergoing primary and revision hip arthroplasty, the changes in risk over time, and the overall burden created by PJI. We analysed revision total hip arthroplasties (THAs) performed due to a diagnosis of PJI and the linked index procedures recorded in the NJR between 2003 and 2014. The cohort analysed consisted of 623 253 index primary hip arthroplasties, 63 222 index revision hip arthroplasties and 7585 revision THAs performed due to a diagnosis of PJI. The prevalence, cumulative incidence functions and the burden of PJI (total procedures) were calculated. Overall linear trends were investigated with log-linear regression. We demonstrated a prevalence of revision THA due to prosthetic joint infection of 0.4/100 procedures following primary and 1.6/100 procedures following revision hip arthroplasty. The prevalence of revision due to PJI in the three months following primary hip arthroplasty has risen 2.3-fold (95% confidence interval (CI) 1.3 to 4.1) between 2005 and 2013, and 3.0-fold (95% CI 1.1 to 8.5) following revision hip arthroplasty. Over 1000 procedures are performed annually as a consequence of hip PJI, an increase of 2.6-fold between 2005 and 2013. Although the risk of revision due to PJI following hip arthroplasty is low, it is rising and, coupled with the established and further predicted increased incidence of both primary and revision hip arthroplasty, this represents a growing and substantial treatment burden. Cite this article : E. Lenguerrand, M. R. Whitehouse, A. D. Beswick, S. A. Jones, M. L. Porter, A. W. Blom. Revision for prosthetic joint infection following hip arthroplasty: Evidence from the National Joint Registry. Bone Joint Res 2017;6:391-398. DOI: 10.1302/2046-3758.66.BJR-2017-0003.R1. © 2017 Lenguerrand et al.

Decapsulation Method for Flip Chips with Ceramics in Microelectronic Packaging

NASA Astrophysics Data System (ADS)

Shih, T. I.; Duh, J. G.

2008-06-01

The decapsulation of flip chips bonded to ceramic substrates is a challenging task in the packaging industry owing to the vulnerability of the chip surface during the process. In conventional methods, such as manual grinding and polishing, the solder bumps are easily damaged during the removal of underfill, and the thin chip may even be crushed due to mechanical stress. An efficient and reliable decapsulation method consisting of thermal and chemical processes was developed in this study. The surface quality of chips after solder removal is satisfactory for the existing solder rework procedure as well as for die-level failure analysis. The innovative processes included heat-sink and ceramic substrate removal, solder bump separation, and solder residue cleaning from the chip surface. In the last stage, particular temperatures were selected for the removal of eutectic Pb-Sn, high-lead, and lead-free solders considering their respective melting points.

Heavy Metal Phytoremediation: Microbial Indicators of Soil Health for the Assessment of Remediation Efficiency

NASA Astrophysics Data System (ADS)

Epelde, Lur; Ma Becerril, José; Alkorta, Itziar; Garbisu, Carlos

Phytoremediation is an effective, non-intrusive, inexpensive, aesthetically pleasing, socially accepted, promising phytotechnology for the remediation of polluted soils. The objective of any soil remediation process must be not only to remove the contaminant(s) from the soil but, most importantly, to restore the continued capacity of the soil to perform or function according to its potential (i.e., to recover soil health). Hence, indicators of soil health are needed to properly assess the efficiency of a phytoremediation process. Biological indicators of soil health, especially those related to the size, activity and diversity of the soil microbial communities, are becoming increasingly used, due to their sensitivity and capacity to provide information that integrates many environmental factors. In particular, microbial indicators of soil health are valid tools to evaluate the success of metal phytoremediation procedures such as phytoextraction and phytostabilization processes.

Surface compositional mapping by spectral ratioing of ERTS-1 MSS data in the Wind River Basin and Range, Wyoming

NASA Technical Reports Server (NTRS)

Vincent, R. K. (Principal Investigator); Salmon, B. C.; Pillars, W. W.; Harris, J. E.

1975-01-01

The author has identified the following significant results. ERTS data collected in August and October 1972 were processed on digital and special purpose analog recognition computers using ratio enhancement and pattern recognition. Ratios of band-averaged laboratory reflectances of some minerals and rock types known to be in the scene compared favorably with ratios derived from the data by ratio normalization procedures. A single ratio display and density slice of the visible channels of ERTS MSS data, Channel 5/Channel 4 (R5,4), separated the Triassic Chugwater formation (redbeds) from other formations present and may have enhanced iron oxide minerals present at the surface in abundance. Comparison of data sets collected over the same area at two different times of the year by digital processing indicated that spectral variation due to environmental factors was reduced by ratio processing.

Development of flow systems by direct-milling on poly(methyl methacrylate) substrates using UV-photopolymerization as sealing process.

PubMed

Rodrigues, Eunice R G O; Lapa, Rui A S

2009-03-01

An alternative process for the design and construction of fluidic devices is presented. Several sealing processes were studied, as well as the hydrodynamic characteristics of the proposed fluidic devices. Manifolds were imprinted on polymeric substrates by direct-write milling, according to Computer Assisted Design (CAD) data. Poly(methyl methacrylate) (PMMA) was used as substrate due to its physical and chemical properties. Different bonding approaches for the imprinted channels were evaluated and UV-photopolymerization of acrylic acid (AA) was selected. The hydrodynamic characteristics of the proposed flow devices were assessed and compared to those obtained in similar flow systems using PTFE reactors and micro-pumps as propulsion units (multi-pumping approach). The applicability of the imprinted reactors was evaluated in the sequential determination of calcium and magnesium in water samples. Results obtained were in good agreement with those obtained by the reference procedure.

Open circuit potential monitored digital photocorrosion of GaAs/AlGaAs quantum well microstructures

NASA Astrophysics Data System (ADS)

Aithal, Srivatsa; Dubowski, Jan J.

2018-04-01

Nanostructuring of semiconductor wafers with an atomic level depth resolution is a challenging task, primarily due to the limited availability of instruments for in situ monitoring of such processes. Conventional digital etching relies on calibration procedures and cumbersome diagnostics applied between or at the end of etching cycles. We have developed a photoluminescence (PL) based process for monitoring in situ digital photocorrosion (DPC) of GaAs/AlGaAs microstructures at rates below 0.2 nm per cycle. In this communication, we demonstrate that DPC of GaAs/AlGaAs microstructures could be monitored with open circuit potential (OCP) measured between the photocorroding surface of a microstructure and an Ag/AgCl reference electrode installed in the sample chamber. The excellent correlation between the position of both PL and OCP maxima indicates that the DPC process could be monitored in situ for materials that do not necessarily exhibit measurable PL emission.

Neuropsychiatric features associated with nutritional and metabolic status in a gastric bypass patient.

PubMed

Waserman, Jessica E; Hategan, Ana; Bourgeois, James A

2015-01-01

Bariatric patients may present for psychiatric evaluation due to exacerbation of preexisting psychiatric disorders, new onset psychiatric disorders and/or neuropsychiatric complications associated with abnormal nutritional and metabolic states following the surgical procedure. These neuropsychiatric complications can be insidious, and clinical manifestations may vary, possibly due to the individual central nervous system (CNS) vulnerability to nutritional decline. Lack of awareness of these complications and their symptoms can result in delays in diagnosis and treatment. Identifying and correcting underlying pathophysiologic processes that lead to such neuropsychiatric syndromes can be challenging. We report a case of a patient who developed a protracted course of mood and cognitive disorder after gastric bypass surgery, which illustrates some of the complexities encountered in diagnosing and managing these patients. Copyright © 2015 Elsevier Inc. All rights reserved.

Integral-geometry characterization of photobiomodulation effects on retinal vessel morphology

PubMed Central

Barbosa, Marconi; Natoli, Riccardo; Valter, Kriztina; Provis, Jan; Maddess, Ted

2014-01-01

The morphological characterization of quasi-planar structures represented by gray-scale images is challenging when object identification is sub-optimal due to registration artifacts. We propose two alternative procedures that enhances object identification in the integral-geometry morphological image analysis (MIA) framework. The first variant streamlines the framework by introducing an active contours segmentation process whose time step is recycled as a multi-scale parameter. In the second variant, we used the refined object identification produced in the first variant to perform the standard MIA with exact dilation radius as multi-scale parameter. Using this enhanced MIA we quantify the extent of vaso-obliteration in oxygen-induced retinopathic vascular growth, the preventative effect (by photobiomodulation) of exposure during tissue development to near-infrared light (NIR, 670 nm), and the lack of adverse effects due to exposure to NIR light. PMID:25071966

Eyewitness Identification Reform: Data, Theory, and Due Process.

PubMed

Clark, Steven E

2012-05-01

Some commentators view my analyses (Clark, 2012, this issue) as an important step forward in assessing the costs and benefits of eyewitness identification reform. Others suggest that the trade-off between correct identifications lost and false identifications avoided is well-known; that the expected utility model is misspecified; and that the loss of correct identifications due to the use of reformed eyewitness identification procedures is irrelevant to policy decisions, as those correct identifications are the illegitimate product of suggestion and lucky guesses. Contrary to these criticisms, the loss of correct identifications has not been adequately considered in theoretical or policy matters, criticisms regarding the various utilities do not substantively change the nature of the trade-off, and the dismissal of lost correct identifications is based not on data but on an outdated theory of recognition memory. © The Author(s) 2012.

Through ARIPAR-GIS the quantified area risk analysis supports land-use planning activities.

PubMed

Spadoni, G; Egidi, D; Contini, S

2000-01-07

The paper first summarises the main aspects of the ARIPAR methodology whose steps can be applied to quantify the impact on a territory of major accident risks due to processing, storing and transporting dangerous substances. Then the capabilities of the new decision support tool ARIPAR-GIS, implementing the mentioned procedure, are described, together with its main features and types of results. These are clearly shown through a short description of the updated ARIPAR study (reference year 1994), in which the impact of changes due to industrial and transportation dynamics on the Ravenna territory in Italy were evaluated. The brief explanation of how results have been used by local administrations offers the opportunity to discuss about advantages of the quantitative area risk analysis tool in supporting activities of risk management, risk control and land-use planning.