Preliminary earthquake locations in the Kenai Peninsula recorded by the MOOS Array and their relationship to structure in the 1964 great earthquake zone

NASA Astrophysics Data System (ADS)

Li, J.; Abers, G. A.; Christensen, D. H.; Kim, Y.; Calkins, J. A.

2011-12-01

Earthquakes in subduction zones are mostly generated at the interface between the subducting and overlying plates. In 2006-2009, the MOOS (Multidisciplinary Observations Of Subduction) seismic array was deployed around the Kenai Peninsula, Alaska, consisting of 34 broadband seismometers recording for 1-3 years. This region spans the eastern end of the Aleutian megathrust that ruptured in the 1964 Mw 9.2 great earthquake, the second largest recorded earthquake, and ongoing seismicity is abundant. Here, we report an initial analysis of seismicity recorded by MOOS, in the context of preliminary imaging. There were 16,462 events detected in one year from initial STA/LTA signal detections and subsequent event associations from the MOOS Array. We manually reviewed them to eliminate distant earthquakes and noise, leaving 11,879 local earthquakes. To refine this catalog, an adaptive auto-regressive onset estimation algorithm was applied, doubling the original dataset and producing 20,659 P picks and 22,999 S picks for one month (September 2007). Inspection shows that this approach lead to almost negligible false alarms and many more events than hand picking. Within the well-sampled part of the array, roughly 200 km by 300 km, we locate 250% more earthquakes for one month than the permanent network catalog, or 10 earthquakes per day on this patch of the megathrust. Although the preliminary locations of earthquakes still show some scatter, we can see a concentration of events in a ~20-km-wide belt, part of which can be interpreted as seismogenic thrust zone. In conjunction with the seismicity study, we are imaging the plate interface with receiver functions. The main seismicity zone corresponds to the top of a low-velocity layer imaged in receiver functions, nominally attributed to the top of the downgoing plate. As we refine velocity models and apply relative relocation algorithms, we expect to improve the precision of the locations substantially. When combined with image

Earthquake detection through computationally efficient similarity search

PubMed Central

Yoon, Clara E.; O’Reilly, Ossian; Bergen, Karianne J.; Beroza, Gregory C.

2015-01-01

Seismology is experiencing rapid growth in the quantity of data, which has outpaced the development of processing algorithms. Earthquake detection—identification of seismic events in continuous data—is a fundamental operation for observational seismology. We developed an efficient method to detect earthquakes using waveform similarity that overcomes the disadvantages of existing detection methods. Our method, called Fingerprint And Similarity Thresholding (FAST), can analyze a week of continuous seismic waveform data in less than 2 hours, or 140 times faster than autocorrelation. FAST adapts a data mining algorithm, originally designed to identify similar audio clips within large databases; it first creates compact “fingerprints” of waveforms by extracting key discriminative features, then groups similar fingerprints together within a database to facilitate fast, scalable search for similar fingerprint pairs, and finally generates a list of earthquake detections. FAST detected most (21 of 24) cataloged earthquakes and 68 uncataloged earthquakes in 1 week of continuous data from a station located near the Calaveras Fault in central California, achieving detection performance comparable to that of autocorrelation, with some additional false detections. FAST is expected to realize its full potential when applied to extremely long duration data sets over a distributed network of seismic stations. The widespread application of FAST has the potential to aid in the discovery of unexpected seismic signals, improve seismic monitoring, and promote a greater understanding of a variety of earthquake processes. PMID:26665176

A new algorithm to detect earthquakes outside the seismic network: preliminary results

NASA Astrophysics Data System (ADS)

Giudicepietro, Flora; Esposito, Antonietta Maria; Ricciolino, Patrizia

2017-04-01

In this text we are going to present a new technique for detecting earthquakes outside the seismic network, which are often the cause of fault of automatic analysis system. Our goal is to develop a robust method that provides the discrimination result as quickly as possible. We discriminate local earthquakes from regional earthquakes, both recorded at SGG station, equipped with short period sensors, operated by Osservatorio Vesuviano (INGV) in the Southern Apennines (Italy). The technique uses a Multi Layer Perceptron (MLP) neural network with an architecture composed by an input layer, a hidden layer and a single node output layer. We pre-processed the data using the Linear Predictive Coding (LPC) technique to extract the spectral features of the signals in a compact form. We performed several experiments by shortening the signal window length. In particular, we used windows of 4, 2 and 1 seconds containing the onset of the local and the regional earthquakes. We used a dataset of 103 local earthquakes and 79 regional earthquakes, most of which occurred in Greece, Albania and Crete. We split the dataset into a training set, for the network training, and a testing set to evaluate the network's capacity of discrimination. In order to assess the network stability, we repeated this procedure six times, randomly changing the data composition of the training and testing set and the initial weights of the net. We estimated the performance of this method by calculating the average of correct detection percentages obtained for each of the six permutations. The average performances are 99.02%, 98.04% and 98.53%, which concern respectively the experiments carried out on 4, 2 and 1 seconds signal windows. The results show that our method is able to recognize the earthquakes outside the seismic network using only the first second of the seismic records, with a suitable percentage of correct detection. Therefore, this algorithm can be profitably used to make earthquake automatic

Detection of large prehistoric earthquakes in the pacific northwest by microfossil analysis.

PubMed

Mathewes, R W; Clague, J J

1994-04-29

Geologic and palynological evidence for rapid sea level change approximately 3400 and approximately 2000 carbon-14 years ago (3600 and 1900 calendar years ago) has been found at sites up to 110 kilometers apart in southwestern British Columbia. Submergence on southern Vancouver Island and slight emergence on the mainland during the older event are consistent with a great (magnitude M >/= 8) earthquake on the Cascadia subduction zone. The younger event is characterized by submergence throughout the region and may also record a plate-boundary earthquake or a very large crustal or intraplate earthquake. Microfossil analysis can detect small amounts of coseismic uplift and subsidence that leave little or no lithostratigraphic signature.

Reading a 400,000-year record of earthquake frequency for an intraplate fault

NASA Astrophysics Data System (ADS)

Williams, Randolph T.; Goodwin, Laurel B.; Sharp, Warren D.; Mozley, Peter S.

2017-05-01

Our understanding of the frequency of large earthquakes at timescales longer than instrumental and historical records is based mostly on paleoseismic studies of fast-moving plate-boundary faults. Similar study of intraplate faults has been limited until now, because intraplate earthquake recurrence intervals are generally long (10s to 100s of thousands of years) relative to conventional paleoseismic records determined by trenching. Long-term variations in the earthquake recurrence intervals of intraplate faults therefore are poorly understood. Longer paleoseismic records for intraplate faults are required both to better quantify their earthquake recurrence intervals and to test competing models of earthquake frequency (e.g., time-dependent, time-independent, and clustered). We present the results of U-Th dating of calcite veins in the Loma Blanca normal fault zone, Rio Grande rift, New Mexico, United States, that constrain earthquake recurrence intervals over much of the past ˜550 ka—the longest direct record of seismic frequency documented for any fault to date. The 13 distinct seismic events delineated by this effort demonstrate that for >400 ka, the Loma Blanca fault produced periodic large earthquakes, consistent with a time-dependent model of earthquake recurrence. However, this time-dependent series was interrupted by a cluster of earthquakes at ˜430 ka. The carbon isotope composition of calcite formed during this seismic cluster records rapid degassing of CO2, suggesting an interval of anomalous fluid source. In concert with U-Th dates recording decreased recurrence intervals, we infer seismicity during this interval records fault-valve behavior. These data provide insight into the long-term seismic behavior of the Loma Blanca fault and, by inference, other intraplate faults.

USGS Tweet Earthquake Dispatch (@USGSted): Using Twitter for Earthquake Detection and Characterization

NASA Astrophysics Data System (ADS)

Liu, S. B.; Bouchard, B.; Bowden, D. C.; Guy, M.; Earle, P.

2012-12-01

The U.S. Geological Survey (USGS) is investigating how online social networking services like Twitter—a microblogging service for sending and reading public text-based messages of up to 140 characters—can augment USGS earthquake response products and the delivery of hazard information. The USGS Tweet Earthquake Dispatch (TED) system is using Twitter not only to broadcast seismically-verified earthquake alerts via the @USGSted and @USGSbigquakes Twitter accounts, but also to rapidly detect widely felt seismic events through a real-time detection system. The detector algorithm scans for significant increases in tweets containing the word "earthquake" or its equivalent in other languages and sends internal alerts with the detection time, tweet text, and the location of the city where most of the tweets originated. It has been running in real-time for 7 months and finds, on average, two or three felt events per day with a false detection rate of less than 10%. The detections have reasonable coverage of populated areas globally. The number of detections is small compared to the number of earthquakes detected seismically, and only a rough location and qualitative assessment of shaking can be determined based on Tweet data alone. However, the Twitter detections are generally caused by widely felt events that are of more immediate interest than those with no human impact. The main benefit of the tweet-based detections is speed, with most detections occurring between 19 seconds and 2 minutes from the origin time. This is considerably faster than seismic detections in poorly instrumented regions of the world. Going beyond the initial detection, the USGS is developing data mining techniques to continuously archive and analyze relevant tweets for additional details about the detected events. The information generated about an event is displayed on a web-based map designed using HTML5 for the mobile environment, which can be valuable when the user is not able to access a

Lake deposits record evidence of large post-1505 AD earthquakes in western Nepal

NASA Astrophysics Data System (ADS)

Ghazoui, Z.; Bertrand, S.; Vanneste, K.; Yokoyama, Y.; Van Der Beek, P.; Nomade, J.; Gajurel, A.

2016-12-01

According to historical records, the last large earthquake that ruptured the Main Frontal Thrust (MFT) in western Nepal occurred in 1505 AD. Since then, no evidence of other large earthquakes has been found in historical records or geological archives. In view of the catastrophic consequences to millions of inhabitants of Nepal and northern India, intense efforts currently focus on improving our understanding of past earthquake activity and complement the historical data on Himalayan earthquakes. Here we report a new record, based on earthquake-triggered turbidites in lakes. We use lake sediment records from Lake Rara, western Nepal, to reconstruct the occurrence of seismic events. The sediment cores were studied using a multi-proxy approach combining radiocarbon and 210Pb chronologies, physical properties (X-ray computerized axial tomography scan, Geotek multi-sensor core logger), high-resolution grain size, inorganic geochemistry (major elements by ITRAX XRF core scanning) and bulk organic geochemistry (C, N concentrations and stable isotopes). We identified several sequences of dense and layered fine sand mainly composed of mica, which we interpret as earthquake-triggered turbidites. Our results suggest the presence of a synchronous event between the two lake sites correlated with the well-known 1505 AD earthquake. In addition, our sediment records reveal five earthquake-triggered turbidites younger than the 1505 AD event. By comparison with historical archives, we relate one of those to the 1833 AD MFT rupture. The others may reflect successive ruptures of the Western Nepal Fault System. Our study sheds light on events that have not been recorded in historical chronicles. Those five MMI>7 earthquakes permit addressing the problem of missing slip on the MFT in western Nepal and reevaluating the risk of a large earthquake affecting western Nepal and North India.

Improved Detection of Local Earthquakes in the Vienna Basin (Austria), using Subspace Detectors

NASA Astrophysics Data System (ADS)

Apoloner, Maria-Theresia; Caffagni, Enrico; Bokelmann, Götz

2016-04-01

The Vienna Basin in Eastern Austria is densely populated and highly-developed; it is also a region of low to moderate seismicity, yet the seismological network coverage is relatively sparse. This demands improving our capability of earthquake detection by testing new methods, enlarging the existing local earthquake catalogue. This contributes to imaging tectonic fault zones for better understanding seismic hazard, also through improved earthquake statistics (b-value, magnitude of completeness). Detection of low-magnitude earthquakes or events for which the highest amplitudes slightly exceed the signal-to-noise-ratio (SNR), may be possible by using standard methods like the short-term over long-term average (STA/LTA). However, due to sparse network coverage and high background noise, such a technique may not detect all potentially recoverable events. Yet, earthquakes originating from the same source region and relatively close to each other, should be characterized by similarity in seismic waveforms, at a given station. Therefore, waveform similarity can be exploited by using specific techniques such as correlation-template based (also known as matched filtering) or subspace detection methods (based on the subspace theory). Matching techniques basically require a reference or template event, usually characterized by high waveform coherence in the array receivers, and high SNR, which is cross-correlated with the continuous data. Instead, subspace detection methods overcome in principle the necessity of defining template events as single events, but use a subspace extracted from multiple events. This approach theoretically should be more robust in detecting signals that exhibit a strong variability (e.g. because of source or magnitude). In this study we scan the continuous data recorded in the Vienna Basin with a subspace detector to identify additional events. This will allow us to estimate the increase of the seismicity rate in the local earthquake catalogue

Sounds of earthquakes in West Bohemia: analysis of sonic and infrasonic records

NASA Astrophysics Data System (ADS)

Fischer, Tomáš; Vilhelm, Jan; Kuna, Václav; Chum, Jaroslav; Horálek, Josef

2013-04-01

Earthquake sounds are usually observed during the occurrence of small earthquakes. The observations of audible manifestations of earthquakes date back to the ancient age and have been recently analyzed in more detail based both on macroseismic observations and audio recordings. In most cases the earthquake sounds resemble low-frequency underground thundering that is generated by seismic-acoustic conversion of P and SV waves at the earth surface. This is also supported by the fact that earthquake sounds usually precede shaking caused by S-waves. The less frequent are explosion-type sounds whose origin remains unclear. We analyze the observations of sounds associating the occurrence of earthquake swarms in the area of West Bohemia/Vogtland, Central Europe. Macroseismic data include 250 reports of sounds with 90% thundering and 10% of explosions. Additional data consist of sonic and infrasonic records acquired by microphones and microbarographs at seismic stations in the area. All the sonic and infrasonic records correspond to sounds of the thunder type; no explosions were recorded. Comparison of these records enabled to determine the seismic wave - air pressure transfer function. The measurements using a 3D microphone array confirm that in the epicentral area the sonic wave is propagating subvertically. We also compared the coda of seismograms and sonic records. It turned out that additional to seismo-acoustic coupling, a later acoustic wave of thunder type arrives at the observation site whose arrival time corresponds to sonic propagation from the epicenter. We analyse the possible generation mechanisms of this type of sonic wave.

Larger earthquakes recur more periodically: New insights in the megathrust earthquake cycle from lacustrine turbidite records in south-central Chile

NASA Astrophysics Data System (ADS)

Moernaut, J.; Van Daele, M.; Fontijn, K.; Heirman, K.; Kempf, P.; Pino, M.; Valdebenito, G.; Urrutia, R.; Strasser, M.; De Batist, M.

2018-01-01

Historical and paleoseismic records in south-central Chile indicate that giant earthquakes on the subduction megathrust - such as in AD1960 (Mw 9.5) - reoccur on average every ∼300 yr. Based on geodetic calculations of the interseismic moment accumulation since AD1960, it was postulated that the area already has the potential for a Mw 8 earthquake. However, to estimate the probability of such a great earthquake to take place in the short term, one needs to frame this hypothesis within the long-term recurrence pattern of megathrust earthquakes in south-central Chile. Here we present two long lacustrine records, comprising up to 35 earthquake-triggered turbidites over the last 4800 yr. Calibration of turbidite extent with historical earthquake intensity reveals a different macroseismic intensity threshold (≥VII1/2 vs. ≥VI1/2) for the generation of turbidites at the coring sites. The strongest earthquakes (≥VII1/2) have longer recurrence intervals (292 ±93 yrs) than earthquakes with intensity of ≥VI1/2 (139 ± 69yr). Moreover, distribution fitting and the coefficient of variation (CoV) of inter-event times indicate that the stronger earthquakes recur in a more periodic way (CoV: 0.32 vs. 0.5). Regional correlation of our multi-threshold shaking records with coastal paleoseismic data of complementary nature (tsunami, coseismic subsidence) suggests that the intensity ≥VII1/2 events repeatedly ruptured the same part of the megathrust over a distance of at least ∼300 km and can be assigned to Mw ≥ 8.6. We hypothesize that a zone of high plate locking - identified by geodetic studies and large slip in AD 1960 - acts as a dominant regional asperity, on which elastic strain builds up over several centuries and mostly gets released in quasi-periodic great and giant earthquakes. Our paleo-records indicate that Poissonian recurrence models are inadequate to describe large megathrust earthquake recurrence in south-central Chile. Moreover, they show an enhanced

Holocene turbidite and onshore paleoseismic record of great earthquakes on the Cascadia Subduction Zone: relevance for the Sumatra 2004 Great Earthquake

NASA Astrophysics Data System (ADS)

Gutierrez-Pastor, J.; Nelson, C. H.; Goldfinger, C.; Johnson, J.

2005-05-01

Marine turbidite stratigraphy, onshore paleoseismic records of tsunami sand beds and co-seismic subsidence (Atwater and Hemphill-Haley, 1997; Kelsey et al., 2002; Witter et al., 2003) and tsunami sands of Japan (Satake et al., 1996) all show evidence for great earthquakes (M ~ 9) on the Cascadia Subduction Zone. When a great earthquake shakes 1000 kilometers of the Cascadia margin, sediment failures occur in all tributary canyons and resulting turbidity currents travel down the canyon systems and deposit synchronous turbidites in abyssal seafloor channels. These turbidite records provide a deepwater paleoseismic record of great earthquakes. An onshore paleoseismic record develops from rapid coseismic subsidence resulting in buried marshes and drowned forests, and subsequent tsunami sand layer deposition. The Cascadia Basin provides the longest paleoseismic record of great earthquakes that is presently available for a subduction zone. A total of 17 synchronous turbidites have deposited along ~700 km of the Cascadia margin during the Holocene time of ~10,000 cal yr. Because the youngest paleoseismic event in all turbidite and onshore records is 300 AD, the average recurrence interval of Great Earthquakes is ~ 600 yr. At least 6 smaller events have also ruptured shorter margin segments. Linkage of the rupture length of these events comes from relative dating tools such as the "confluence test" of Adams (1990), radiocarbon ages of onshore and offshore events and physical property correlation of individual event "signatures". We use both 14C ages and analysis of hemipelagic sediment thickness between turbidites (H), where H/sedimentation rate = time between turbidite events to develop two recurrence histories. Utilizing the most reliable 14C and hemipelagic data sets from turbidites for the past ~ 5000 yr, the minimum recurrence time is ~ 300 yr and maximum time is ~ 1300 yr. There also is a recurrence pattern through the entire Holocene that consists of a long time

Estimation of completeness magnitude with a Bayesian modeling of daily and weekly variations in earthquake detectability

NASA Astrophysics Data System (ADS)

Iwata, T.

2014-12-01

In the analysis of seismic activity, assessment of earthquake detectability of a seismic network is a fundamental issue. For this assessment, the completeness magnitude Mc, the minimum magnitude above which all earthquakes are recorded, is frequently estimated. In most cases, Mc is estimated for an earthquake catalog of duration longer than several weeks. However, owing to human activity, noise level in seismic data is higher on weekdays than on weekends, so that earthquake detectability has a weekly variation [e.g., Atef et al., 2009, BSSA]; the consideration of such a variation makes a significant contribution to the precise assessment of earthquake detectability and Mc. For a quantitative evaluation of the weekly variation, we introduced the statistical model of a magnitude-frequency distribution of earthquakes covering an entire magnitude range [Ogata & Katsura, 1993, GJI]. The frequency distribution is represented as the product of the Gutenberg-Richter law and a detection rate function. Then, the weekly variation in one of the model parameters, which corresponds to the magnitude where the detection rate of earthquakes is 50%, was estimated. Because earthquake detectability also have a daily variation [e.g., Iwata, 2013, GJI], and the weekly and daily variations were estimated simultaneously by adopting a modification of a Bayesian smoothing spline method for temporal change in earthquake detectability developed in Iwata [2014, Aust. N. Z. J. Stat.]. Based on the estimated variations in the parameter, the value of Mc was estimated. In this study, the Japan Meteorological Agency catalog from 2006 to 2010 was analyzed; this dataset is the same as analyzed in Iwata [2013] where only the daily variation in earthquake detectability was considered in the estimation of Mc. A rectangular grid with 0.1° intervals covering in and around Japan was deployed, and the value of Mc was estimated for each gridpoint. Consequently, a clear weekly variation was revealed; the

Preliminary Results of Earthquake-Induced Building Damage Detection with Object-Based Image Classification

NASA Astrophysics Data System (ADS)

Sabuncu, A.; Uca Avci, Z. D.; Sunar, F.

2016-06-01

Earthquakes are the most destructive natural disasters, which result in massive loss of life, infrastructure damages and financial losses. Earthquake-induced building damage detection is a very important step after earthquakes since earthquake-induced building damage is one of the most critical threats to cities and countries in terms of the area of damage, rate of collapsed buildings, the damage grade near the epicenters and also building damage types for all constructions. Van-Ercis (Turkey) earthquake (Mw= 7.1) was occurred on October 23th, 2011; at 10:41 UTC (13:41 local time) centered at 38.75 N 43.36 E that places the epicenter about 30 kilometers northern part of the city of Van. It is recorded that, 604 people died and approximately 4000 buildings collapsed or seriously damaged by the earthquake. In this study, high-resolution satellite images of Van-Ercis, acquired by Quickbird-2 (Digital Globe Inc.) after the earthquake, were used to detect the debris areas using an object-based image classification. Two different land surfaces, having homogeneous and heterogeneous land covers, were selected as case study areas. As a first step of the object-based image processing, segmentation was applied with a convenient scale parameter and homogeneity criterion parameters. As a next step, condition based classification was used. In the final step of this preliminary study, outputs were compared with streetview/ortophotos for the verification and evaluation of the classification accuracy.

Data quality of seismic records from the Tohoku, Japan earthquake as recorded across the Albuquerque Seismological Laboratory networks

USGS Publications Warehouse

Ringler, A.T.; Gee, L.S.; Marshall, B.; Hutt, C.R.; Storm, T.

2012-01-01

Great earthquakes recorded across modern digital seismographic networks, such as the recent Tohoku, Japan, earthquake on 11 March 2011 (Mw = 9.0), provide unique datasets that ultimately lead to a better understanding of the Earth's structure (e.g., Pesicek et al. 2008) and earthquake sources (e.g., Ammon et al. 2011). For network operators, such events provide the opportunity to look at the performance across their entire network using a single event, as the ground motion records from the event will be well above every station's noise floor.

Distributed Fiber Optic Sensors for Earthquake Detection and Early Warning

NASA Astrophysics Data System (ADS)

Karrenbach, M. H.; Cole, S.

2016-12-01

Fiber optic cables placed along pipelines, roads or other infrastructure provide dense sampling of passing seismic wavefields. Laser interrogation units illuminate the fiber over its entire length, and strain at desired points along the fiber can be determined from the reflected signal. Single-mode optical fibers up to 50 km in length can provide a distributed acoustic sensing system (DAS) where the acoustic bandwidth of each channel is limited only by the round-trip time over the length of the cable (0.0005 s for a 50 km cable). Using a 10 m spatial resolution results in 4000 channels sampled at 2.5 kHz spanning a 40 km-long fiber deployed along a pipeline. The inline strain field is averaged along the fiber over a 10 m section of the cable at each desired spatial sample, creating a virtual sensor location. Typically, a dynamic strain sensitivity of sub-nanometers within each gauge along the entire length of the fiber can be achieved. This sensitivity corresponds to a particle displacement figure of approximately -90 dB ms-2Hz-½. Such a fiber optic sensor is not as sensitive as long-period seismometers used in earthquake networks, but given the large number of channels, small to medium-sized earthquakes can be detected, depending on distance from the array, and can be located with precision through arrival time inversions. We show several examples of earthquake recordings using distributed fiber optic arrays that were deployed originally for other purposes. A 480 km long section of a pipeline in Turkey was actively monitored with a DAS fiber optic system for activities in the immediate vicinity of the pipeline. The densely spaced sensor array along the pipeline detected earthquakes of 3.6 - 7.2 magnitude range, centered near Van, Turkey. Secondly, a fiber optic system located along a rail line near the Salton Sea in California was used to create a smaller scale fiber optic sensor array, on which earthquakes with magnitudes 2.2 - 2.7 were recorded from epicenters

Detection of Repeating Earthquakes within the Cascadia Subduction Zone Using 2013-2014 Cascadia Initiative Amphibious Network Data

NASA Astrophysics Data System (ADS)

Kenefic, L.; Morton, E.; Bilek, S.

2017-12-01

It is well known that subduction zones create the largest earthquakes in the world, like the magnitude 9.5 Chile earthquake in 1960, or the more recent 9.1 magnitude Japan earthquake in 2011, both of which are in the top five largest earthquakes ever recorded. However, off the coast of the Pacific Northwest region of the U.S., the Cascadia subduction zone (CSZ) remains relatively quiet and modern seismic instruments have not recorded earthquakes of this size in the CSZ. The last great earthquake, a magnitude 8.7-9.2, occurred in 1700 and is constrained by written reports of the resultant tsunami in Japan and dating a drowned forest in the U.S. Previous studies have suggested the margin is most likely segmented along-strike. However, variations in frictional conditions in the CSZ fault zone are not well known. Geodetic modeling indicates that the locked seismogenic zone is likely completely offshore, which may be too far from land seismometers to adequately detect related seismicity. Ocean bottom seismometers, as part of the Cascadia Initiative Amphibious Network, were installed directly above the inferred seismogenic zone, which we use to better detect small interplate seismicity. Using the subspace detection method, this study looks to find new seismogenic zone earthquakes. This subspace detection method uses multiple previously known event templates concurrently to scan through continuous seismic data. Template events that make up the subspace are chosen from events in existing catalogs that likely occurred along the plate interface. Corresponding waveforms are windowed on the nearby Cascadia Initiative ocean bottom seismometers and coastal land seismometers for scanning. Detections that are found by the scan are similar to the template waveforms based upon a predefined threshold. Detections are then visually examined to determine if an event is present. The presence of repeating event clusters can indicate persistent seismic patches, likely corresponding to

Quantified sensitivity of lakes to record historic earthquakes: Implications for paleoseismology

NASA Astrophysics Data System (ADS)

Wilhelm, Bruno; Nomade, Jerome; Crouzet, Christian; Litty, Camille; Belle, Simon; Rolland, Yann; Revel, Marie; Courboulex, Françoise; Arnaud, Fabien; Anselmetti, Flavio S.

2015-04-01

Seismic hazard assessment is a challenging issue for modern societies. A key parameter to be estimated is the recurrence interval of damaging earthquakes. In moderately active seismo-tectonic regions, this requires the establishment of earthquake records long enough to be relevant, i.e. far longer than historical observations. Here we investigate how lake sediments can be used for this purpose and quantify the conditions that enable earthquake recording. For this purpose, (i) we studied nine lake-sediment sequences to reconstruct mass-movement chronicles in different settings of the French Alpine range and (ii) we compared the chronicles to the well-documented earthquake history over the last five centuries. The studied lakes are all small alpine-type lakes based directly on bedrock. All lake sequences have been studied following the same methodology; (i) a multi-core approach to well understand the sedimentary processes within the lake basins, (ii) a high-resolution lithological and grain-size characterization and (iii) a dating based on short-lived radionuclide measurements, lead contaminations and radiocarbon ages. We identified 40 deposits related to 26 mass-movement (MM) occurrences. 46% (12 on 26) of the MMs are synchronous in neighbouring lakes, supporting strongly an earthquake origin. In addition, the good agreement between MMs ages and historical earthquake dates suggests an earthquake trigger for 88% (23 on 26) of them. Related epicenters are always located at distances of less than 100 km from the lakes and their epicentral MSK intensity ranges between VII and IX. However, the number of earthquake-triggered MMs varies between lakes of a same region, suggesting a gradual sensitivity of the lake sequences towards earthquake shaking, i.e. distinct lake-sediment slope stabilities. The quantification of this earthquake sensitivity and the comparison to the lake system and sediment characteristics suggest that the primary factor explaining this variability is

Main shock and aftershock records of the 1999 Izmit and Duzce, Turkey earthquakes

USGS Publications Warehouse

Celebi, M.; Akkar, Sinan; Gulerce, U.; Sanli, A.; Bundock, H.; Salkin, A.

2001-01-01

The August 17, 1999 Izmit (Turkey) earthquake (Mw=7.4) will be remembered as one of the largest earthquakes of recent times that affected a large urban environment (U.S. Geological Survey, 1999). This significant event was followed by many significant aftershocks and another main event (Mw=7.2) that occurred on November 12, 1999 near Duzce (Turkey). The shaking that caused the widespread damage and destruction was recorded by a handful of accelerographs (~30) in the earthquake area operated by different networks. The characteristics of these records show that the recorded peak accelerations, shown in Figure 1, even those from near field stations, are smaller than expected (Çelebi, 1999, 2000). Following this main event, several organizations from Turkey, Japan, France and the USA deployed temporary accelerographs and other aftershock recording hardware. Thus, the number of recording stations in the earthquake affected area was quadrupled (~130). As a result, as seen in Figure 2, smaller magnitude aftershocks yielded larger peak accelerations, indicating that because of the sparse networks, recording of larger motions during the main shock of August 17, 1999 were possibly missed.

Major earthquakes recorded by Speleothems in Midwestern U.S. caves

USGS Publications Warehouse

Panno, S.V.; Lundstrom, C.C.; Hackley, Keith C.; Curry, B. Brandon; Fouke, B.W.; Zhang, Z.

2009-01-01

Historic earthquakes generated by the New Madrid seismic zone represent some of the largest recorded in the United States, yet prehistoric events are recognized only through deformation in late-Wisconsin to Holocene-age, near surface sediments (liquefaction, monoclinal folding, and changes in river meanders). In this article, we show that speleothems in caves of southwestern Illinois and southeastern Missouri may constitute a previously unrecognized recorder of large earthquakes in the U.S. midcontinent region. The timing of the initiation and regrowth of stalagmites in southwestern Illinois and southeastern Missouri caves is consistent with the historic and prehistoric record of several known seismic events in the U.S. midcontinent region. We conclude that dating the initiation of original stalagmite growth and later postearthquake rejuvenation constitutes a new paleoseismic method that has the potential for being applied to any region around the world in the vicinity of major seismic zones where caves exist. Use of this technique could expand the geographical distribution of paleoseimic data, document prehistoric earthquakes, and help improve interpretations of paleoearthquakes.

Detection of earthquake swarms at subduction zones globally: Insights into tectonic controls on swarm activity

NASA Astrophysics Data System (ADS)

Nishikawa, T.; Ide, S.

2017-07-01

Earthquake swarms are characterized by an increase in seismicity rate that lacks a distinguished main shock and does not obey Omori's law. At subduction zones, they are thought to be related to slow-slip events (SSEs) on the plate interface. Earthquake swarms in subduction zones can therefore be used as potential indicators of slow-slip events. However, the global distribution of earthquake swarms at subduction zones remains unclear. Here we present a method for detecting such earthquake sequences using the space-time epidemic-type aftershock-sequence model. We applied this method to seismicity (M ≥ 4.5) recorded in the Advanced National Seismic System catalog at subduction zones during the period of 1995-2009. We detected 453 swarms, which is about 6.7 times the number observed in a previous catalog. Foreshocks of some large earthquakes are also detected as earthquake swarms. In some subduction zones, such as at Ibaraki-Oki, Japan, swarm-like foreshocks and ordinary swarms repeatedly occur at the same location. Given that both foreshocks and swarms are related to SSEs on the plate interface, these regions may have experienced recurring SSEs. We then compare the swarm activity and tectonic properties of subduction zones, finding that swarm activity is positively correlated with curvature of the incoming plate before subduction. This result implies that swarm activity is controlled either by hydration of the incoming plate or by heterogeneity on the plate interface due to fracturing related to slab bending.

Detecting Earthquakes--Part 2.

ERIC Educational Resources Information Center

Isenberg, C.; And Others

1983-01-01

Basic concepts associated with seismic wave propagation through the earth and the location of seismic events were explained in part 1 (appeared in January 1983 issue). This part focuses on the construction of a student seismometer for detecting earthquakes and underground nuclear explosions anywhere on the earth's surface. (Author/JN)

Continuous estimates on the earthquake early warning magnitude by use of the near-field acceleration records

NASA Astrophysics Data System (ADS)

Li, Jun; Jin, Xing; Wei, Yongxiang; Zhang, Hongcai

2013-10-01

In this article, the seismic records of Japan's Kik-net are selected to measure the acceleration, displacement, and effective peak acceleration of each seismic record within a certain time after P wave, then a continuous estimation is given on earthquake early warning magnitude through statistical analysis method, and Wenchuan earthquake record is utilized to check the method. The results show that the reliability of earthquake early warning magnitude continuously increases with the increase of the seismic information, the biggest residual happens if the acceleration is adopted to fit earthquake magnitude, which may be caused by rich high-frequency components and large dispersion of peak value in acceleration record, the influence caused by the high-frequency components can be effectively reduced if the effective peak acceleration and peak displacement is adopted, it is estimated that the dispersion of earthquake magnitude obviously reduces, but it is easy for peak displacement to be affected by long-period drifting. In various components, the residual enlargement phenomenon at vertical direction is almost unobvious, thus it is recommended in this article that the effective peak acceleration at vertical direction is preferred to estimate earthquake early warning magnitude. Through adopting Wenchuan strong earthquake record to check the method mentioned in this article, it is found that this method can be used to quickly, stably, and accurately estimate the early warning magnitude of this earthquake, which shows that this method is completely applicable for earthquake early warning.

One hundred years of earthquake recording at the University of California

USGS Publications Warehouse

Bolt, B. A.

1987-01-01

The best seismographs then available arrived from England in 1887 and were installed at Lick Observatory on Mt.Hamilton and at the Students Astronomical Observatory on the Berkeley campus. The first California earthquake recorded by the Lick instrument was on April 24, 1887. These seismographic stations have functioned continuously from their founding to the present day, with improvements in instruments from time to time as technology advanced. Now they are part of a sesimogrpahic network of 16 stations recording with great completeness both local and distant earthquakes. 

Strong motion observations and recordings from the great Wenchuan Earthquake

USGS Publications Warehouse

Li, X.; Zhou, Z.; Yu, H.; Wen, R.; Lu, D.; Huang, M.; Zhou, Y.; Cu, J.

2008-01-01

The National Strong Motion Observation Network System (NSMONS) of China is briefly introduced in this paper. The NSMONS consists of permanent free-field stations, special observation arrays, mobile observatories and a network management system. During the Wenchuan Earthquake, over 1,400 components of acceleration records were obtained from 460 permanent free-field stations and three arrays for topographical effect and structural response observation in the network system from the main shock, and over 20,000 components of acceleration records from strong aftershocks occurred before August 1, 2008 were also obtained by permanent free-field stations of the NSMONS and 59 mobile instruments quickly deployed after the main shock. The strong motion recordings from the main shock and strong aftershocks are summarized in this paper. In the ground motion recordings, there are over 560 components with peak ground acceleration (PGA) over 10 Gal, the largest being 957.7 Gal. The largest PGA recorded during the aftershock exceeds 300 Gal. ?? 2008 Institute of Engineering Mechanics, China Earthquake Administration and Springer-Verlag GmbH.

Ionospheric earthquake effects detection based on Total Electron Content (TEC) GPS Correlation

NASA Astrophysics Data System (ADS)

Sunardi, Bambang; Muslim, Buldan; Eka Sakya, Andi; Rohadi, Supriyanto; Sulastri; Murjaya, Jaya

2018-03-01

Advances in science and technology showed that ground-based GPS receiver was able to detect ionospheric Total Electron Content (TEC) disturbances caused by various natural phenomena such as earthquakes. One study of Tohoku (Japan) earthquake, March 11, 2011, magnitude M 9.0 showed TEC fluctuations observed from GPS observation network spread around the disaster area. This paper discussed the ionospheric earthquake effects detection using TEC GPS data. The case studies taken were Kebumen earthquake, January 25, 2014, magnitude M 6.2, Sumba earthquake, February 12, 2016, M 6.2 and Halmahera earthquake, February 17, 2016, M 6.1. TEC-GIM (Global Ionosphere Map) correlation methods for 31 days were used to monitor TEC anomaly in ionosphere. To ensure the geomagnetic disturbances due to solar activity, we also compare with Dst index in the same time window. The results showed anomalous ratio of correlation coefficient deviation to its standard deviation upon occurrences of Kebumen and Sumba earthquake, but not detected a similar anomaly for the Halmahera earthquake. It was needed a continous monitoring of TEC GPS data to detect the earthquake effects in ionosphere. This study giving hope in strengthening the earthquake effect early warning system using TEC GPS data. The method development of continuous TEC GPS observation derived from GPS observation network that already exists in Indonesia is needed to support earthquake effects early warning systems.

Earthquake Signatures in the Modern Sediment Record of Prince William Sound, Alaska

NASA Astrophysics Data System (ADS)

Marshall, N. R.; Kuehl, S. A.; Dellapenna, T. M.; Miller, E. J.

2016-02-01

Geochemical signatures of earthquake-generated sediment gravity flows are investigated using X-ray fluorescence core scanning on a suite of sediment cores from Prince William Sound, Alaska. This study focused on the development of geochemical proxies for earthquake deposits with an emphasis on interpreting deposits initiated from large subduction earthquakes. A north-south transect of sediment cores from Prince William Sound, between Hinchinbrook Island and the Columbia Glacier, was used to examine a record of earthquakes in this tectonically active region for the past century. The sediments in Prince William Sound are sourced from two geologically distinct regions: the metamorphosed turbidites of coastal Prince William Sound, and the Copper River Basin that contains a significant amount of volcanic rocks. Geochemical studies of sediment cores and end-member sediment samples using X-ray fluorescence and inductively coupled plasma mass spectrometry allowed for the development of geochemical proxies for sediment provenance during the past 100 years. Downcore peaks in Sr/Pb are indicative of Copper River Basin sediments, whereas peaks in K/Ca are indicative of inputs of Prince William Sound sediments. Large subduction earthquakes in northern Prince William Sound initiate gravity flows of Prince William Sound provenance into the deep channel. Particularly robust provenance signatures are seen in the northernmost cores in the core transect, which are closer to the earthquake epicenters and the Columbia Glacier source region. The ages of the deposits, from core-averaged 210Pb sediment accumulation rates, correspond to large earthquakes that occurred in 1912, 1964, and 1983. A similar deposit from 1895 in northern Prince William Sound, prior to historical earthquake records, may have also been initiated from a large earthquake in the 1890's.

Electromagnetic (EM) earthquake precursor transmission and detection regarding experimental field and laboratory results.

NASA Astrophysics Data System (ADS)

Jones, Kenneth B., II; Saxton, Patrick

2016-04-01

Aside from understanding the animal kingdom reacting to a per-earthquake signal, a transmission source is apparent. The focus of this investigation is an electromagnetic emission approach and detection capable of becoming both practical and reliable to other plausible earthquake precursors. To better determine this method, several prototype magnetometers were devised and built with each successive version improving upon the next. Two twin (prototype #2) antennae were deployed to field settings outside the NE Texas town of Timpson, TX back in February, 2013 and very recent laboratory tests using the most refined (prototype #4) experimental antenna for detecting unconfined, granitic block fracturing. Field testing encompassed the small NE Texas town of Timpson, TX, which endured an earthquake phenomenon (May, 2012 - September, 2013). A rare sequence of events was strictly attributed to hydraulic fracturing activity in the immediate area all for hydrocarbon capture; thus, a chance to detect and record man-made earthquake activity. By swiveling two directional antennae at three locations, one mobile, the antennae could 'zero' in on a signal source until its pattern was well established and mapped, accordingly. Three signals were detected, two strong and one moderately strong, each with epicenter implications several kilometers from known seismological sites. Six months later, two M4s and a M2.4 earthquake hit over the 2013 Labor Day weekend. Hydraulic pump pressure increased deep Earth pore pressure, reduced friction, and displaced opposing tectonic stresses causing rock to fracture. This was the last earthquake sequence in the Timpson area, due to personal involvement and area citizens in contact with their state representatives. Well and drilling operations have since moved 40-50 miles SE of Timpson, TX and rare earthquake activity has now occurred there. Laboratory testing was next performed using cored granitic blocks and the latest, improved antenna with an

Auto Correlation Analysis of Coda Waves from Local Earthquakes for Detecting Temporal Changes in Shallow Subsurface Structures: the 2011 Tohoku-Oki, Japan Earthquake

NASA Astrophysics Data System (ADS)

Nakahara, Hisashi

2015-02-01

For monitoring temporal changes in subsurface structures I propose to use auto correlation functions of coda waves from local earthquakes recorded at surface receivers, which probably contain more body waves than surface waves. Use of coda waves requires earthquakes resulting in decreased time resolution for monitoring. Nonetheless, it may be possible to monitor subsurface structures in sufficient time resolutions in regions with high seismicity. In studying the 2011 Tohoku-Oki, Japan earthquake (Mw 9.0), for which velocity changes have been previously reported, I try to validate the method. KiK-net stations in northern Honshu are used in this analysis. For each moderate earthquake normalized auto correlation functions of surface records are stacked with respect to time windows in the S-wave coda. Aligning the stacked, normalized auto correlation functions with time, I search for changes in phases arrival times. The phases at lag times of <1 s are studied because changes at shallow depths are focused. Temporal variations in the arrival times are measured at the stations based on the stretching method. Clear phase delays are found to be associated with the mainshock and to gradually recover with time. The amounts of the phase delays are 10 % on average with the maximum of about 50 % at some stations. The deconvolution analysis using surface and subsurface records at the same stations is conducted for validation. The results show the phase delays from the deconvolution analysis are slightly smaller than those from the auto correlation analysis, which implies that the phases on the auto correlations are caused by larger velocity changes at shallower depths. The auto correlation analysis seems to have an accuracy of about several percent, which is much larger than methods using earthquake doublets and borehole array data. So this analysis might be applicable in detecting larger changes. In spite of these disadvantages, this analysis is still attractive because it can

Sedimentary earthquake records in the İzmit Gulf, Sea of Marmara, Turkey

NASA Astrophysics Data System (ADS)

Çağatay, M. N.; Erel, L.; Bellucci, L. G.; Polonia, A.; Gasperini, L.; Eriş, K. K.; Sancar, Ü.; Biltekin, D.; Uçarkuş, G.; Ülgen, U. B.; Damcı, E.

2012-12-01

Sedimentary earthquake records of the last 2400 a, including that of the devastating 17 August 1999 İzmit earthquake (Mw = 7.4), were studied in cores from the 210 m-deep central Karamürsel Basin of the İzmit Gulf in the eastern Sea of Marmara, using laser grain-size, physical properties, stable O and C isotopes and XRF Core Scanner analyses, and dated by radionuclide and radiocarbon methods. The earthquake records are represented by turbidite-homogenite mass-flow units (THU) that commonly contain a basal coarse layer, a middle laminated silt layer and an overlying homogeneous mud layer. The coarse basal part has a sharp and sometimes scoured lower boundary, and includes multiple coarse (sand/silt) layers or laminae showing normal size grading. Multiple coarse layers and occasional bi-directional cross-bedding suggest deposition from a bed-load during water column oscillations, or seiche effect. The grain-size characteristics of the overlaying laminated silt and the homogeneous mud units indicate deposition from weak oscillating currents and homogeneous suspension, respectively. High Mn value just below the base of THUs suggests diagenetic enrichment at oxic/anoxic redox boundary before the mass-flow event. Sharp decrease in Mn with very low values within the THUs suggests transient redox conditions following the mass-flow. Variable geochemical compositions of the basal coarse layers indicate different sediment sources for different THUs. Eight sedimentary earthquake records observed in the last 2400 a in the İzmit Gulf can be confidently correlated with the historical earthquakes of 1999, 1509 AD (Ms = 7.2), 1296 AD (I = VII), 865 AD (I = VIII), 740 AD (I = VIII), 268 AD (I = VIII), 358 AD (I = IX), and 427 BC. This gives an earthquake recurrence time of ca. 300 a, with the interval between consecutive events ranging from 90 to 695 a.

Analysis of Earthquake Recordings Obtained from the Seafloor Earthquake Measurement System (SEMS) Instruments Deployed off the Coast of Southern California

USGS Publications Warehouse

Boore, D.M.; Smith, C.E.

1999-01-01

For more than 20 years, a program has been underway to obtain records of earthquake shaking on the seafloor at sites offshore of southern California, near oil platforms. The primary goal of the program is to obtain data that can help determine if ground motions at offshore sites are significantly different than those at onshore sites; if so, caution may be necessary in using onshore motions as the basis for the seismic design of oil platforms. We analyze data from eight earthquakes recorded at six offshore sites; these are the most important data recorded on these stations to date. Seven of the earthquakes were recorded at only one offshore station; the eighth event was recorded at two sites. The earthquakes range in magnitude from 4.7 to 6.1. Because of the scarcity of multiple recordings from any one event, most of the analysis is based on the ratio of spectra from vertical and horizontal components of motion. The results clearly show that the offshore motions have very low vertical motions compared to those from an average onshore site, particularly at short periods. Theoretical calculations find that the water layer has little effect on the horizontal components of motion but that it produces a strong spectral null on the vertical component at the resonant frequency of P waves in the water layer. The vertical-to-horizontal ratios for a few selected onshore sites underlain by relatively low shear-wave velocities are similar to the ratios from offshore sites for frequencies less than about one-half the water layer P-wave resonant frequency, suggesting that the shear-wave velocities beneath a site are more important than the water layer in determining the character of the ground motions at lower frequencies.

Rapid earthquake characterization using MEMS accelerometers and volunteer hosts following the M 7.2 Darfield, New Zealand, Earthquake

USGS Publications Warehouse

Lawrence, J. F.; Cochran, E.S.; Chung, A.; Kaiser, A.; Christensen, C. M.; Allen, R.; Baker, J.W.; Fry, B.; Heaton, T.; Kilb, Debi; Kohler, M.D.; Taufer, M.

2014-01-01

We test the feasibility of rapidly detecting and characterizing earthquakes with the Quake‐Catcher Network (QCN) that connects low‐cost microelectromechanical systems accelerometers to a network of volunteer‐owned, Internet‐connected computers. Following the 3 September 2010 M 7.2 Darfield, New Zealand, earthquake we installed over 180 QCN sensors in the Christchurch region to record the aftershock sequence. The sensors are monitored continuously by the host computer and send trigger reports to the central server. The central server correlates incoming triggers to detect when an earthquake has occurred. The location and magnitude are then rapidly estimated from a minimal set of received ground‐motion parameters. Full seismic time series are typically not retrieved for tens of minutes or even hours after an event. We benchmark the QCN real‐time detection performance against the GNS Science GeoNet earthquake catalog. Under normal network operations, QCN detects and characterizes earthquakes within 9.1 s of the earthquake rupture and determines the magnitude within 1 magnitude unit of that reported in the GNS catalog for 90% of the detections.

Detection of high-frequency radiation sources during the 2004 Parkfield earthquake by a matched filter analysis

NASA Astrophysics Data System (ADS)

Uchide, T.; Shearer, P. M.

2009-12-01

Introduction Uchide and Ide [SSA Spring Meeting, 2009] proposed a new framework for studying the scaling and overall nature of earthquake rupture growth in terms of cumulative moment functions. For better understanding of rupture growth processes, spatiotemporally local processes are also important. The nature of high-frequency (HF) radiation has been investigated for some time, but its role in the earthquake rupture process is still unclear. A wavelet analysis reveals that the HF radiation (e.g., 4 - 32 Hz) of the 2004 Parkfield earthquake is peaky, which implies that the sources of the HF radiation are isolated in space and time. We experiment with applying a matched filter analysis using small template events occurring near the target event rupture area to test whether it can reveal the HF radiation sources for a regular large earthquake. Method We design a matched filter for multiple components and stations. Shelly et al. [2007] attempted identifying low-frequency earthquakes (LFE) in non-volcanic tremor waveforms by stacking the correlation coefficients (CC) between the seismograms of the tremor and the LFE. Differing from their method, our event detection indicator is the CC between the seismograms of the target and template events recorded at the same stations, since the key information for detecting the sources will be the arrival-time differences and the amplitude ratios among stations. Data from both the target and template events are normalized by the maximum amplitude of the seismogram of the template event in the cross-correlation time window. This process accounts for the radiation pattern and distance between the source and stations. At each small earthquake target, high values in the CC time series suggest the possibility of HF radiation during the mainshock rupture from a similar location to the target event. Application to the 2004 Parkfield earthquake We apply the matched filter method to the 2004 Parkfield earthquake (Mw 6.0). We use seismograms

Quasi-periodic recurrence of great and giant earthquakes in South-Central Chile inferred from lacustrine turbidite records

NASA Astrophysics Data System (ADS)

Strasser, M.; Moernaut, J.; Van Daele, M. E.; De Batist, M. A. O.

2017-12-01

Coastal paleoseismic records in south-central Chile indicate that giant megathrust earthquakes -such as in AD1960 (Mw9.5)- occur on average every 300 yrs. Based on geodetic data, it was postulated that the area already has the potential for a Mw8 earthquake. However, to estimate the probability for such a great earthquake from a paleo-perspective, one needs to reconstruct the long-term recurrence pattern of megathrust earthquakes. Here, we present two long lacustrine records, comprising up to 35 earthquake-triggered turbidites over the last 4800 yrs. Calibration of turbidite extent with historical earthquake intensity reveals a different macroseismic intensity threshold (≥VII½ vs. ≥VI½) for the generation of turbidites at the coring sites. The strongest earthquakes (≥VII½) have longer recurrence intervals (292 ±93 yrs) than earthquakes with intensity of ≥VI½ (139 ±69 yrs). The coefficient of variation (CoV) of inter-event times indicate that the strongest earthquakes recur in a quasi-periodic way (CoV: 0.32) and follow a normal distribution. Including also "smaller" earthquakes (Intensity down to VI½) increases the CoV (0.5) and fits best with a Weibull distribution. Regional correlation of our multi-threshold shaking records with coastal records of tsunami and coseismic subsidence suggests that the intensity ≥VII½ events repeatedly ruptured the same part of the megathrust over a distance of at least 300 km and can be assigned to a Mw ≥ 8.6. We hypothesize that a zone of high plate locking -identified by GPS data and large slip in AD 1960- acts as a dominant regional asperity, on which elastic strain builds up over several centuries and mostly gets released in quasi-periodic great and giant earthquakes. For the next 110 yrs, we infer an enhanced probability for a Mw 7.7-8.5 earthquake whereas the probability for a Mw ≥ 8.6 (AD1960-like) earthquake remains low.

Detection and location of earthquakes along the west coast of Chile: Examining seismicity in the 2010 M 8.8 Maule and 2014 M 8.1 Iquique earthquake rupture zones.

NASA Astrophysics Data System (ADS)

Diniakos, R. S.; Bilek, S. L.; Rowe, C. A.; Draganov, D.

2015-12-01

The subduction of the Nazca Plate beneath the South American Plate along Chile has led to some of the largest earthquakes recorded on modern seismic instrumentation. These include the 1960 M 9.5 Valdivia, 2010 M 8.8 Maule, and 2014 M 8.1 Iquique earthquakes. Slip heterogeneity for both the 2010 and 2014 earthquakes has been noted in various studies. In order to explore both spatial variations in the continued aftershocks of the 2010 event, and also seismicity to the north along Iquique prior to the 2014 earthquake relative to the high slip regions, we are expanding the catalog of small earthquakes using template matching algorithms to find other small earthquakes in the region. We start with an earthquake catalog developed from regional and local array data; these events provide the templates used to search through waveform data from a temporary seismic array in Malargue, Argentina, located ~300 km west of the Maule region, which operated in 2012. Our template events are first identified on the array stations, and we use a 10-s window around the P-wave arrival as the template. We then use a waveform cross-correlation algorithm to compare the template with day-long seismograms from Malargue stations. The newly detected events are then located using the HYPOINVERSE2000 program. Initial results for 103 templates on 19 of the array stations show that we find 275 new events ,with an average of three new events for each template correlated. For these preliminary results, events from the Maule region appear to provide the most new detections, with an average of ten new events. We will present our locations for the detected events and we will compare them to patterns of high slip along the 2010 rupture zone of the M 8.8 Maule earthquake and the 2014 M 8.1 Iquique event.

Improved detection and relocation of micro-earthquakes applied to the Sea of Marmara

NASA Astrophysics Data System (ADS)

Tary, J. B.; Evangelia, B.; Géli, L.; Lomax, A.

2016-12-01

The Sea of Marmara is located at the western end of the North Anatolian Fault (NAF). This part of the NAF is considered as a seismic gap, being between the Izmit and Duzce earthquakes to the East and the Ganos earthquake to the West. Improved detection and location of seismicity in the Sea of Marmara is important for defining the seismic hazard in this area.On July 25, 2011, a Mw 5 earthquake occurred below the Western High in the western part of the Sea of Marmara. This earthquake as well as its aftershock sequence were recorded by a network of 10 ocean bottom seismometers (Ifremer) as well as seafloor observatories (KOERI). The OBSs were deployed from mid-April, 2011, to the end of July, 2011.The aftershock sequence is characterized by deep seismicity ( 10-15 km) around the main shock and shallow seismicity. Some of the shallow seismicity could be located at a similar depth as gas prone sediment layers below the Western High. The exact causes of these shallow aftershocks are still unclear. To better define this aftershock sequence, we use the match filter technique with a selection of aftershocks as templates to dig out child events from the continuous data streams. The templates are cross-correlated with the continuous data for stations with absolute time picks. The cross-correlation coefficients are then summed over all stations and components, and we then compute its median absolute deviation (MAD). Signals are detected when the summed cross-correlation time series exceeds a given number of times the MAD. Using a conservative detection threshold, we obtain a 10-fold increase in the number of events. The newly detected events are then relocated using the double-difference technique. With these newly detected events, we investigate the nucleation phase of the main shock and the aftershock sequence, as well as the possible triggering of the shallow aftershocks by the deeper seismicity.

Broadband records of earthquakes in deep gold mines and a comparison with results from SAFOD, California

USGS Publications Warehouse

McGarr, Arthur F.; Boettcher, M.; Fletcher, Jon Peter B.; Sell, Russell; Johnston, Malcolm J.; Durrheim, R.; Spottiswoode, S.; Milev, A.

2009-01-01

For one week during September 2007, we deployed a temporary network of field recorders and accelerometers at four sites within two deep, seismically active mines. The ground-motion data, recorded at 200 samples/sec, are well suited to determining source and ground-motion parameters for the mining-induced earthquakes within and adjacent to our network. Four earthquakes with magnitudes close to 2 were recorded with high signal/noise at all four sites. Analysis of seismic moments and peak velocities, in conjunction with the results of laboratory stick-slip friction experiments, were used to estimate source processes that are key to understanding source physics and to assessing underground seismic hazard. The maximum displacements on the rupture surfaces can be estimated from the parameter , where  is the peak ground velocity at a given recording site, and R is the hypocentral distance. For each earthquake, the maximum slip and seismic moment can be combined with results from laboratory friction experiments to estimate the maximum slip rate within the rupture zone. Analysis of the four M 2 earthquakes recorded during our deployment and one of special interest recorded by the in-mine seismic network in 2004 revealed maximum slips ranging from 4 to 27 mm and maximum slip rates from 1.1 to 6.3 m/sec. Applying the same analyses to an M 2.1 earthquake within a cluster of repeating earthquakes near the San Andreas Fault Observatory at Depth site, California, yielded similar results for maximum slip and slip rate, 14 mm and 4.0 m/sec.

Detection of Traveling Ionospheric Disturbances Induced by 2010 Mindanao Earthquakes

NASA Astrophysics Data System (ADS)

Shahbazi, A.; Park, J.; Huang, C.

2017-12-01

Earthquakes precipitate anomalous variations in the concentration of free electrons/ions in the ionosphere being known as the Traveling Ionospheric Disturbance (TID). The TIDs can be detected from the Total Electron Content (TEC), which can be extracted from the ionospheric delay along the ray path of the GNSS signal between a satellite and a receiver. In this study, we utilized the GNSS-derived TEC observed by Communication/Navigation Outage Forecasting System (C/NOFS), which is a Low Earth Orbit (LEO) satellite. As a case study, we detected the ionospheric perturbations triggered by 2010 Mindanao earthquakes in the Moro Gulf, southern Philippines. Since this sequence of the earthquakes was occurred in depths of about 600 km, the low detectability of TID signature was expected while the magnitude of the foreshock, primary shock and aftershock were of 7.3, 7.6, and 7.5 Mb, respectively. Hence, we introduced a novel filtering scheme to assess the performance of space-based TEC observations in identification of earthquake-induced TIDs as well as to cope with the challenge of investigating deep subsequent earthquakes. The proposed approach suppresses the dominant trend of TEC by Hodrick-Prescott (H-P) Filter, which identifies the extremums of the remained signal as the potential TIDs and associates them to the seismic waves. Considering the propagation mechanism of the seismic waves given in the literatures that the wave propagates upward from the earthquake epicenter to the upper atmosphere, and then, moves horizontally through the ionosphere, we applied the first order linear regression model to estimate the propagation velocity of TIDs. Our experimental result demonstrated the vertical propagation velocity of 0.980 km/s and the horizontal propagation velocity through the ionosphere of 1.066 km/s with the std. of 0.364 km/s. The correlation coefficient of the detected TIDs in this model is 0.78 that illustrates the detected TIDs are well correlated with the event

Catastrophic valley fills record large Himalayan earthquakes, Pokhara, Nepal

NASA Astrophysics Data System (ADS)

Stolle, Amelie; Bernhardt, Anne; Schwanghart, Wolfgang; Hoelzmann, Philipp; Adhikari, Basanta R.; Fort, Monique; Korup, Oliver

2017-12-01

Uncertain timing and magnitudes of past mega-earthquakes continue to confound seismic risk appraisals in the Himalayas. Telltale traces of surface ruptures are rare, while fault trenches document several events at best, so that additional proxies of strong ground motion are needed to complement the paleoseismological record. We study Nepal's Pokhara basin, which has the largest and most extensively dated archive of earthquake-triggered valley fills in the Himalayas. These sediments form a 148-km2 fan that issues from the steep Seti Khola gorge in the Annapurna Massif, invading and plugging 15 tributary valleys with tens of meters of debris, and impounding several lakes. Nearly a dozen new radiocarbon ages corroborate at least three episodes of catastrophic sedimentation on the fan between ∼700 and ∼1700 AD, coinciding with great earthquakes in ∼1100, 1255, and 1344 AD, and emplacing roughly >5 km3 of debris that forms the Pokhara Formation. We offer a first systematic sedimentological study of this formation, revealing four lithofacies characterized by thick sequences of mid-fan fluvial conglomerates, debris-flow beds, and fan-marginal slackwater deposits. New geochemical provenance analyses reveal that these upstream dipping deposits of Higher Himalayan origin contain lenses of locally derived river clasts that mark time gaps between at least three major sediment pulses that buried different parts of the fan. The spatial pattern of 14C dates across the fan and the provenance data are key to distinguishing these individual sediment pulses, as these are not evident from their sedimentology alone. Our study demonstrates how geomorphic and sedimentary evidence of catastrophic valley infill can help to independently verify and augment paleoseismological fault-trench records of great Himalayan earthquakes, while offering unparalleled insights into their long-term geomorphic impacts on major drainage basins.

Detection of small earthquakes with dense array data: example from the San Jacinto fault zone, southern California

NASA Astrophysics Data System (ADS)

Meng, Haoran; Ben-Zion, Yehuda

2018-01-01

We present a technique to detect small earthquakes not included in standard catalogues using data from a dense seismic array. The technique is illustrated with continuous waveforms recorded in a test day by 1108 vertical geophones in a tight array on the San Jacinto fault zone. Waveforms are first stacked without time-shift in nine non-overlapping subarrays to increase the signal-to-noise ratio. The nine envelope functions of the stacked records are then multiplied with each other to suppress signals associated with sources affecting only some of the nine subarrays. Running a short-term moving average/long-term moving average (STA/LTA) detection algorithm on the product leads to 723 triggers in the test day. Using a local P-wave velocity model derived for the surface layer from Betsy gunshot data, 5 s long waveforms of all sensors around each STA/LTA trigger are beamformed for various incident directions. Of the 723 triggers, 220 are found to have localized energy sources and 103 of these are confirmed as earthquakes by verifying their observation at 4 or more stations of the regional seismic network. This demonstrates the general validity of the method and allows processing further the validated events using standard techniques. The number of validated events in the test day is >5 times larger than that in the standard catalogue. Using these events as templates can lead to additional detections of many more earthquakes.

Auto correlation analysis of coda waves from local earthquakes for detecting temporal changes in shallow subsurface structures - The 2011 Tohoku-Oki, Japan, earthquake -

NASA Astrophysics Data System (ADS)

Nakahara, H.

2013-12-01

For monitoring temporal changes in subsurface structures, I propose to use auto correlation functions of coda waves from local earthquakes recorded at surface receivers, which probably contain more body waves than surface waves. Because the use of coda waves requires earthquakes, time resolution for monitoring decreases. But at regions with high seismicity, it may be possible to monitor subsurface structures in sufficient time resolutions. Studying the 2011 Tohoku-Oki (Mw 9.0), Japan, earthquake for which velocity changes have been already reported by previous studies, I try to validate the method. KiK-net stations in northern Honshu are used in the analysis. For each moderate earthquake, normalized auto correlation functions of surface records are stacked with respect to time windows in S-wave coda. Aligning the stacked normalized auto correlation functions with time, I search for changes in arrival times of phases. The phases at lag times of less than 1s are studied because changes at shallow depths are focused. Based on the stretching method, temporal variations in the arrival times are measured at the stations. Clear phase delays are found to be associated with the mainshock and to gradually recover with time. Amounts of the phase delays are in the order of 10% on average with the maximum of about 50% at some stations. For validation, the deconvolution analysis using surface and subsurface records at the same stations are conducted. The results show that the phase delays from the deconvolution analysis are slightly smaller than those from the auto correlation analysis, which implies that the phases on the auto correlations are caused by larger velocity changes at shallower depths. The auto correlation analysis seems to have an accuracy of about several percents, which is much larger than methods using earthquake doublets and borehole array data. So this analysis might be applicable to detect larger changes. In spite of these disadvantages, this analysis is

Statistical discrimination of induced and tectonic earthquake sequences in Central and Eastern US based on waveform detected catalogs

NASA Astrophysics Data System (ADS)

Meng, X.; Daniels, C.; Smith, E.; Peng, Z.; Chen, X.; Wagner, L. S.; Fischer, K. M.; Hawman, R. B.

2015-12-01

Since 2001, the number of M>3 earthquakes increased significantly in Central and Eastern United States (CEUS), likely due to waste-water injection, also known as "induced earthquakes" [Ellsworth, 2013]. Because induced earthquakes are driven by short-term external forcing and hence may behave like earthquake swarms, which are not well characterized by branching point-process models, such as the Epidemic Type Aftershock Sequence (ETAS) model [Ogata, 1988]. In this study we focus on the 02/15/2014 M4.1 South Carolina and the 06/16/2014 M4.3 Oklahoma earthquakes, which likely represent intraplate tectonic and induced events, respectively. For the South Carolina event, only one M3.0 aftershock is identified by the ANSS catalog, which may be caused by a lack of low-magnitude events in this catalog. We apply a recently developed matched filter technique to detect earthquakes from 02/08/2014 to 02/22/2014 around the epicentral region. 15 seismic stations (both permanent and temporary USArray networks) within 100 km of the mainshock are used for detection. The mainshock and aftershock are used as templates for the initial detection. Newly detected events are employed as new templates, and the same detection procedure repeats until no new event can be added. Overall we have identified more than 10 events, including one foreshock occurred ~11 min before the M4.1 mainshock. However, the numbers of aftershocks are still much less than predicted with the modified Bath's law. For the Oklahoma event, we use 1270 events from the ANSS catalog and 182 events from a relocated catalog as templates to scan through continuous recordings 3 days before to 7 days after the mainshock. 12 seismic stations within the vicinity of the mainshock are included in the study. After obtaining more complete catalogs for both sequences, we plan to compare the statistical parameters (e.g., b, a, K, and p values) between the two sequences, as well as their spatial-temporal migration pattern, which may

Coral 13C/12C records of vertical seafloor displacement during megathrust earthquakes west of Sumatra

NASA Astrophysics Data System (ADS)

Gagan, Michael K.; Sosdian, Sindia M.; Scott-Gagan, Heather; Sieh, Kerry; Hantoro, Wahyoe S.; Natawidjaja, Danny H.; Briggs, Richard W.; Suwargadi, Bambang W.; Rifai, Hamdi

2015-12-01

The recent surge of megathrust earthquakes and tsunami disasters has highlighted the need for a comprehensive understanding of earthquake cycles along convergent plate boundaries. Space geodesy has been used to document recent crustal deformation patterns with unprecedented precision, however the production of long paleogeodetic records of vertical seafloor motion is still a major challenge. Here we show that carbon isotope ratios (δ13C) in the skeletons of massive Porites corals from west Sumatra record abrupt changes in light exposure resulting from coseismic seafloor displacements. Validation of the method is based on the coral δ13C response to uplift (and subsidence) produced by the March 2005 Mw 8.6 Nias-Simeulue earthquake, and uplift further south around Sipora Island during a M ∼ 8.4 megathrust earthquake in February 1797. At Nias, the average step-change in coral δ13C was 0.6 ± 0.1 ‰ /m for coseismic displacements of +1.8 m and -0.4 m in 2005. At Sipora, a distinct change in Porites microatoll growth morphology marks coseismic uplift of 0.7 m in 1797. In this shallow water setting, with a steep light attenuation gradient, the step-change in microatoll δ13C is 2.3 ‰ /m, nearly four times greater than for the Nias Porites. Considering the natural variability in coral skeletal δ13C, we show that the lower detection limit of the method is around 0.2 m of vertical seafloor motion. Analysis of vertical displacement for well-documented earthquakes suggests this sensitivity equates to shallow events exceeding Mw ∼ 7.2 in central megathrust and back-arc thrust fault settings. Our findings indicate that the coral 13C /12C paleogeodesy technique could be applied to convergent tectonic margins throughout the tropical western Pacific and eastern Indian oceans, which host prolific coral reefs, and some of the world's greatest earthquake catastrophes. While our focus here is the link between coral δ13C, light exposure and coseismic crustal deformation, the

Coral 13C/12C records of vertical seafloor displacement during megathrust earthquakes west of Sumatra

USGS Publications Warehouse

Gagan, Michael K.; Sosdian, Sindia M.; Scott-Gagan, Heather; Sieh, Kerry; Hantoro, Wahyoe S.; Natawidjaja, Danny H.; Briggs, Richard W.; Suwargadi, Bambang W.; Rifai, Hamdi

2015-01-01

The recent surge of megathrust earthquakes and tsunami disasters has highlighted the need for a comprehensive understanding of earthquake cycles along convergent plate boundaries. Space geodesy has been used to document recent crustal deformation patterns with unprecedented precision, however the production of long paleogeodetic records of vertical seafloor motion is still a major challenge. Here we show that carbon isotope ratios () in the skeletons of massive Porites   corals from west Sumatra record abrupt changes in light exposure resulting from coseismic seafloor displacements. Validation of the method is based on the coral  response to uplift (and subsidence) produced by the March 2005 Mw 8.6 Nias–Simeulue earthquake, and uplift further south around Sipora Island during a M∼8.4 megathrust earthquake in February 1797. At Nias, the average step-change in coral  was 0.6±0.1‰/m for coseismic displacements of +1.8 m and −0.4 m in 2005. At Sipora, a distinct change in Porites  microatoll growth morphology marks coseismic uplift of 0.7 m in 1797. In this shallow water setting, with a steep light attenuation gradient, the step-change in microatoll  is2.3‰/m, nearly four times greater than for the Nias Porites  . Considering the natural variability in coral skeletal , we show that the lower detection limit of the method is around 0.2 m of vertical seafloor motion. Analysis of vertical displacement for well-documented earthquakes suggests this sensitivity equates to shallow events exceedingMw∼7.2 in central megathrust and back-arc thrust fault settings. Our findings indicate that the coral  paleogeodesy technique could be applied to convergent tectonic margins throughout the tropical western Pacific and eastern Indian oceans, which host prolific coral reefs, and some of the world's greatest earthquake catastrophes. While our focus here is the link between coral , light exposure and coseismic crustal deformation, the same principles

Method for detecting moment connection fracture using high-frequency transients in recorded accelerations

USGS Publications Warehouse

Rodgers, J.E.; Elebi, M.

2011-01-01

The 1994 Northridge earthquake caused brittle fractures in steel moment frame building connections, despite causing little visible building damage in most cases. Future strong earthquakes are likely to cause similar damage to the many un-retrofitted pre-Northridge buildings in the western US and elsewhere. Without obvious permanent building deformation, costly intrusive inspections are currently the only way to determine if major fracture damage that compromises building safety has occurred. Building instrumentation has the potential to provide engineers and owners with timely information on fracture occurrence. Structural dynamics theory predicts and scale model experiments have demonstrated that sudden, large changes in structure properties caused by moment connection fractures will cause transient dynamic response. A method is proposed for detecting the building-wide level of connection fracture damage, based on observing high-frequency, fracture-induced transient dynamic responses in strong motion accelerograms. High-frequency transients are short (<1 s), sudden-onset waveforms with frequency content above 25 Hz that are visually apparent in recorded accelerations. Strong motion data and damage information from intrusive inspections collected from 24 sparsely instrumented buildings following the 1994 Northridge earthquake are used to evaluate the proposed method. The method's overall success rate for this data set is 67%, but this rate varies significantly with damage level. The method performs reasonably well in detecting significant fracture damage and in identifying cases with no damage, but fails in cases with few fractures. Combining the method with other damage indicators and removing records with excessive noise improves the ability to detect the level of damage. ?? 2010 Elsevier B.V. All rights reserved.

Sedimentary record of the 1872 earthquake and "Tsunami" at Owens Lake, southeast California

USGS Publications Warehouse

Smoot, J.P.; Litwin, R.J.; Bischoff, J.L.; Lund, S.J.

2000-01-01

In 1872, a magnitude 7.5-7.7 earthquake vertically offset the Owens Valley fault by more than a meter. An eyewitness reported a large wave on the surface of Owens Lake, presumably initiated by the earthquake. Physical evidence of this event is found in cores and trenches from Owens Lake, including soft-sediment deformation and fault offsets. A graded pebbly sand truncates these features, possibly over most of the lake floor, reflecting the "tsunami" wave. Confirmation of the timing of the event is provided by abnormally high lead concentrations in the sediment immediately above and below these proposed earthquake deposits derived from lead-smelting plants that operated near the eastern lake margin from 1869-1876. The bottom velocity in the deepest part of the lake needed to transport the coarsest grain sizes in the graded pebbly sand provides an estimate of the minimum initial 'tsunami' wave height at 37 cm. This is less than the wave height calculated from long-wave numerical models (about 55 cm) using average fault displacement during the earthquake. Two other graded sand deposits associated with soft-sediment deformation in the Owens Lake record are less than 3000 years old, and are interpreted as evidence of older earthquake and tsunami events. Offsets of the Owens Valley fault elsewhere in the valley indicate that at least two additional large earthquakes occurred during the Holocene, which is consistent with our observations in this lacustrine record.

Earthquake Records of North Anatolian Fault from Sapanca Lake Sediments, NW Anatolia

NASA Astrophysics Data System (ADS)

Yalamaz, Burak; Cagatay, Namık; Acar, Dursun; Demirbag, Emin; Gungor, Emin; Gungor, Nurdan; Gulen, Levent

2014-05-01

We determined earthquake records in sediment cores of Sapanca Lake which is a pull-apart basin located along the North Anatolian Fault zone in NW Anatolia. The lake has a maximum depth of 55 m, and a surface area of 46.8 km2, measuring 16 km in E-W and 5 km in N-S directions. A systematic study of the sedimentological, physical and geochemical properties of three water-sediment interface cores, up to 75.7 cm long, located along depth transects ranging from 43 to 51.5 m water depths. The cores were analyzed using Geotek Multi Sensor Core Logger (MSCL) for physical properties, laser particle size analyzer for granulometry, TOC Analyzer for Total Organic Content (TOC) and Total Inorganic Carbon (TIC) analysis, Itrax-XRF Core Scanner for elemental analysis and digital X-RAY Radiography. The geochronology was determined using AMS radiocarbon and radionuclide methods. The Sapanca Lake earthquake records are characterized by mass flow units consisting of grey or dark grey coarse to fine sand and silty mud with sharp basal and transional upper boundaries. The units commonly show normal size grading with their basal parts showing high density, and high magnetic susceptibility and enrichment in one or more elements, such as Si, Ca, Tİ, K, Rb, Zr and Fe, indicative of coarse detrial input. Based on radionuclide and radiocarbon analyses the mass flow units are correlated with 1999 İzmit and Düzce earthquakes (Mw=7.4 and 7.2, respectively) , 1967 Mudurnu earthquake (Mw= 6,8), and 1957 Abant (Mw= 7.1) earthquake. Keywords: Sapanca Lake, North Anatolian Fault, Earthquake, Grain size, Itrax-XRF, MSCL

A Real-Time Earthquake Precursor Detection Technique Using TEC from a GPS Network

NASA Astrophysics Data System (ADS)

Alp Akyol, Ali; Arikan, Feza; Arikan, Orhan

2016-07-01

Anomalies have been observed in the ionospheric electron density distribution prior to strong earthquakes. However, most of the reported results are obtained by earthquake analysis. Therefore, their implementation in practice is highly problematic. Recently, a novel earthquake precursor detection technique based on spatio-temporal analysis of Total Electron Content (TEC) data obtained from Turkish National Permanent GPS Network (TNPGN) is developed by IONOLAB group (www.ionolab.org). In the present study, the developed detection technique is implemented in a causal setup over the available data set in test phase that enables the real time implementation. The performance of the developed earthquake prediction technique is evaluated by using 10 fold cross validation over the data obtained in 2011. Among the 23 earthquakes that have magnitudes higher than 5, the developed technique can detect precursors of 14 earthquakes while producing 8 false alarms. This study is supported by TUBITAK 115E915 and Joint TUBITAK 114E092 and AS CR 14/001 projects.

Seismic Strong Motion Array Project (SSMAP) to Record Future Large Earthquakes in the Nicoya Peninsula area, Costa Rica

NASA Astrophysics Data System (ADS)

Simila, G.; Lafromboise, E.; McNally, K.; Quintereo, R.; Segura, J.

2007-12-01

The seismic strong motion array project (SSMAP) for the Nicoya Peninsula in northwestern Costa Rica is composed of 10 - 13 sites including Geotech A900/A800 accelerographs (three-component), Ref-Teks (three- component velocity), and Kinemetric Episensors. The main objectives of the array are to: 1) record and locate strong subduction zone mainshocks [and foreshocks, "early aftershocks", and preshocks] in Nicoya Peninsula, at the entrance of the Nicoya Gulf, and in the Papagayo Gulf regions of Costa Rica, and 2) record and locate any moderate to strong upper plate earthquakes triggered by a large subduction zone earthquake in the above regions. Our digital accelerograph array has been deployed as part of our ongoing research on large earthquakes in conjunction with the Earthquake and Volcano Observatory (OVSICORI) at the Universidad Nacional in Costa Rica. The country wide seismographic network has been operating continuously since the 1980's, with the first earthquake bulletin published more than 20 years ago, in 1984. The recording of seismicity and strong motion data for large earthquakes along the Middle America Trench (MAT) has been a major research project priority over these years, and this network spans nearly half the time of a "repeat cycle" (~ 50 years) for large (Ms ~ 7.5- 7.7) earthquakes beneath the Nicoya Peninsula, with the last event in 1950. Our long time co- collaborators include the seismology group OVSICORI, with coordination for this project by Dr. Ronnie Quintero and Mr. Juan Segura. The major goal of our project is to contribute unique scientific information pertaining to a large subduction zone earthquake and its related seismic activity when the next large earthquake occurs in Nicoya. We are now collecting a database of strong motion records for moderate sized events to document this last stage prior to the next large earthquake. A recent event (08/18/06; M=4.3) located 20 km northwest of Samara was recorded by two stations (Playa Carrillo

A plate boundary earthquake record from a wetland adjacent to the Alpine fault in New Zealand refines hazard estimates

NASA Astrophysics Data System (ADS)

Cochran, U. A.; Clark, K. J.; Howarth, J. D.; Biasi, G. P.; Langridge, R. M.; Villamor, P.; Berryman, K. R.; Vandergoes, M. J.

2017-04-01

Discovery and investigation of millennial-scale geological records of past large earthquakes improve understanding of earthquake frequency, recurrence behaviour, and likelihood of future rupture of major active faults. Here we present a ∼2000 year-long, seven-event earthquake record from John O'Groats wetland adjacent to the Alpine fault in New Zealand, one of the most active strike-slip faults in the world. We linked this record with the 7000 year-long, 22-event earthquake record from Hokuri Creek (20 km along strike to the north) to refine estimates of earthquake frequency and recurrence behaviour for the South Westland section of the plate boundary fault. Eight cores from John O'Groats wetland revealed a sequence that alternated between organic-dominated and clastic-dominated sediment packages. Transitions from a thick organic unit to a thick clastic unit that were sharp, involved a significant change in depositional environment, and were basin-wide, were interpreted as evidence of past surface-rupturing earthquakes. Radiocarbon dates of short-lived organic fractions either side of these transitions were modelled to provide estimates for earthquake ages. Of the seven events recognised at the John O'Groats site, three post-date the most recent event at Hokuri Creek, two match events at Hokuri Creek, and two events at John O'Groats occurred in a long interval during which the Hokuri Creek site may not have been recording earthquakes clearly. The preferred John O'Groats-Hokuri Creek earthquake record consists of 27 events since ∼6000 BC for which we calculate a mean recurrence interval of 291 ± 23 years, shorter than previously estimated for the South Westland section of the fault and shorter than the current interseismic period. The revised 50-year conditional probability of a surface-rupturing earthquake on this fault section is 29%. The coefficient of variation is estimated at 0.41. We suggest the low recurrence variability is likely to be a feature of

Prediction of Strong Earthquake Ground Motion for the M=7.4 and M=7.2 1999, Turkey Earthquakes based upon Geological Structure Modeling and Local Earthquake Recordings

NASA Astrophysics Data System (ADS)

Gok, R.; Hutchings, L.

2004-05-01

We test a means to predict strong ground motion using the Mw=7.4 and Mw=7.2 1999 Izmit and Duzce, Turkey earthquakes. We generate 100 rupture scenarios for each earthquake, constrained by a prior knowledge, and use these to synthesize strong ground motion and make the prediction. Ground motion is synthesized with the representation relation using impulsive point source Green's functions and synthetic source models. We synthesize the earthquakes from DC to 25 Hz. We demonstrate how to incorporate this approach into standard probabilistic seismic hazard analyses (PSHA). The synthesis of earthquakes is based upon analysis of over 3,000 aftershocks recorded by several seismic networks. The analysis provides source parameters of the aftershocks; records available for use as empirical Green's functions; and a three-dimensional velocity structure from tomographic inversion. The velocity model is linked to a finite difference wave propagation code (E3D, Larsen 1998) to generate synthetic Green's functions (DC < f < 0.5 Hz). We performed the simultaneous inversion for hypocenter locations and three-dimensional P-wave velocity structure of the Marmara region using SIMULPS14 along with 2,500 events. We also obtained source moment and corner frequency and individual station attenuation parameter estimates for over 500 events by performing a simultaneous inversion to fit these parameters with a Brune source model. We used the results of the source inversion to deconvolve out a Brune model from small to moderate size earthquake (M<4.0) recordings to obtain empirical Green's functions for the higher frequency range of ground motion (0.5 < f < 25.0 Hz). Work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract W-7405-ENG-48.

Teleseismically recorded seismicity before and after the May 7, 1986, Andreanof Islands, Alaska, earthquake

USGS Publications Warehouse

Engdahl, E.R.; Billington, S.; Kisslinger, C.

1989-01-01

The Andreanof Islands earthquake (Mw 8.0) is the largest event to have occurred in that section of the Aleutian arc since the March 9, 1957, Aleutian Islands earthquake (Mw 8.6). Teleseismically well-recorded earthquakes in the region of the 1986 earthquake are relocated with a plate model and with careful attention to the focal depths. The data set is nearly complete for mb???4.7 between longitudes 172??W and 179??W for the period 1964 through April 1987 and provides a detailed description of the space-time history of moderate-size earthquakes in the region for that period. Additional insight is provided by source parameters which have been systematically determined for Mw???5 earthquakes that occurred in the region since 1977 and by a modeling study of the spatial distribution of moment release on the mainshock fault plane. -from Authors

Robust method to detect and locate local earthquakes by means of amplitude measurements.

NASA Astrophysics Data System (ADS)

del Puy Papí Isaba, María; Brückl, Ewald

2016-04-01

station. As a direct consequence, we are able to save computing time for the calculation of the final back-projected maximum resultant amplitude at every grid-point. The capability of the method was demonstrated firstly using synthetic data. In the next step, this method was applied to data of 43 local earthquakes of low and medium magnitude (1.7 < magnitude scale < 4.3). These earthquakes were recorded and detected by the seismic network ALPAACT (seismological and geodetic monitoring of Alpine PAnnonian ACtive Tectonics) in the period 2010/06/11 to 2013/09/20. Data provided by the ALPAACT network is used in order to understand seismic activity in the Mürz Valley - Semmering - Vienna Basin transfer fault system in Austria and what makes it such a relatively high earthquake hazard and risk area. The method will substantially support our efforts to involve scholars from polytechnic schools in seismological work within the Sparkling Science project Schools & Quakes.

Preliminary analysis of strong-motion recordings from the 28 September 2004 Parkfield, California earthquake

USGS Publications Warehouse

Shakal, A.; Graizer, V.; Huang, M.; Borcherdt, R.; Haddadi, H.; Lin, K.-W.; Stephens, C.; Roffers, P.

2005-01-01

The Parkfield 2004 earthquake yielded the most extensive set of strong-motion data in the near-source region of a magnitude 6 earthquake yet obtained. The recordings of acceleration and volumetric strain provide an unprecedented document of the near-source seismic radiation for a moderate earthquake. The spatial density of the measurements alon g the fault zone and in the linear arrays perpendicular to the fault is expected to provide an exceptional opportunity to develop improved models of the rupture process. The closely spaced measurements should help infer the temporal and spatial distribution of the rupture process at much higher resolution than previously possible. Preliminary analyses of the peak a cceleration data presented herein shows that the motions vary significantly along the rupture zone, from 0.13 g to more than 2.5 g, with a map of the values showing that the larger values are concentrated in three areas. Particle motions at the near-fault stations are consistent with bilateral rupture. Fault-normal pulses similar to those observed in recent strike-slip earthquakes are apparent at several of the stations. The attenuation of peak ground acceleration with distance is more rapid than that indicated by some standard relationships but adequately fits others. Evidence for directivity in the peak acceleration data is not strong. Several stations very near, or over, the rupturing fault recorded relatively low accelerations. These recordings may provide a quantitative basis to understand observations of low near-fault shaking damage that has been reported in other large strike-slip earthquak.

Remotely Triggered Earthquakes Recorded by EarthScope's Transportable Array and Regional Seismic Networks: A Case Study Of Four Large Earthquakes

NASA Astrophysics Data System (ADS)

Velasco, A. A.; Cerda, I.; Linville, L.; Kilb, D. L.; Pankow, K. L.

2013-05-01

Changes in field stress required to trigger earthquakes have been classified in two basic ways: static and dynamic triggering. Static triggering occurs when an earthquake that releases accumulated strain along a fault stress loads a nearby fault. Dynamic triggering occurs when an earthquake is induced by the passing of seismic waves from a large mainshock located at least two or more fault lengths from the epicenter of the main shock. We investigate details of dynamic triggering using data collected from EarthScope's USArray and regional seismic networks located in the United States. Triggered events are identified using an optimized automated detector based on the ratio of short term to long term average (Antelope software). Following the automated processing, the flagged waveforms are individually analyzed, in both the time and frequency domains, to determine if the increased detection rates correspond to local earthquakes (i.e., potentially remotely triggered aftershocks). Here, we show results using this automated schema applied to data from four large, but characteristically different, earthquakes -- Chile (Mw 8.8 2010), Tokoku-Oki (Mw 9.0 2011), Baja California (Mw 7.2 2010) and Wells Nevada (Mw 6.0 2008). For each of our four mainshocks, the number of detections within the 10 hour time windows span a large range (1 to over 200) and statistically >20% of the waveforms show evidence of anomalous signals following the mainshock. The results will help provide for a better understanding of the physical mechanisms involved in dynamic earthquake triggering and will help identify zones in the continental U.S. that may be more susceptible to dynamic earthquake triggering.

Fossil rocks of slow earthquake detected by thermal diffusion length

NASA Astrophysics Data System (ADS)

Hashimoto, Yoshitaka; Morita, Kiyohiko; Okubo, Makoto; Hamada, Yohei; Lin, Weiren; Hirose, Takehiro; Kitamura, Manami

2016-04-01

Fault motion has been estimated by diffusion pattern of frictional heating recorded in geology (e.g., Fulton et al., 2012). The same record in deeper subduction plate interface can be observed from micro-faults in an exhumed accretionary complex. In this study, we focused on a micro-fault within the Cretaceous Shimanto Belt, SW Japan to estimate fault motion from the frictional heating diffusion pattern. A carbonaceous material concentrated layer (CMCL) with ~2m of thickness is observed in study area. Some micro-faults cut the CMCL. Thickness of a fault is about 3.7mm. Injection veins and dilatant fractures were observed in thin sections, suggesting that the high fluid pressure was existed. Samples with 10cm long were collected to measure distribution of vitrinite reflectance (Ro) as a function of distance from the center of micro-fault. Ro of host rock was ~1.0%. Diffusion pattern was detected decreasing in Ro from ~1.2%-~1.1%. Characteristic diffusion distance is ~4-~9cm. We conducted grid search to find the optimal frictional heat generation per unit area per second (Q (J/m^2/s), the product of friction coefficient, normal stress and slip velocity) and slip duration (t(s)) to fit the diffusion pattern. Thermal diffusivity (0.98*10^8m^2/s) and thermal conductivity (2.0 w/mK) were measured. In the result, 2000-2500J/m^2/s of Q and 63000-126000s of t were estimated. Moment magnitudes (M0) of slow earthquakes (slow EQs) follow a scaling law with slip duration and its dimension is different from that for normal earthquakes (normal EQ) (Ide et al., 2007). The slip duration estimated in this study (~10^4-~10^5s) consistent with 4-5 of M0, never fit to the scaling law for normal EQ. Heat generation can be inverted from 4-5 of M0, corresponding with ~10^8-~10^11J, which is consistent with rupture area of 10^5-10^8m2 in this study. The comparisons in heat generation and slip duration between geological measurements and geophysical remote observations give us the

Do submarine landslides and turbidites provide a faithful record of large magnitude earthquakes in the Western Mediterranean?

NASA Astrophysics Data System (ADS)

Clare, Michael

2016-04-01

Large earthquakes and associated tsunamis pose a potential risk to coastal communities. Earthquakes may trigger submarine landslides that mix with surrounding water to produce turbidity currents. Recent studies offshore Algeria have shown that earthquake-triggered turbidity currents can break important communication cables. If large earthquakes reliably trigger landslides and turbidity currents, then their deposits can be used as a long-term record to understand temporal trends in earthquake activity. It is important to understand in which settings this approach can be applied. We provide some suggestions for future Mediterranean palaeoseismic studies, based on learnings from three sites. Two long piston cores from the Balearic Abyssal Plain provide long-term (<150 ka) records of large volume turbidites. The frequency distribution form of turbidite recurrence indicates a constant hazard rate through time and is similar to the Poisson distribution attributed to large earthquake recurrence on a regional basis. Turbidite thickness varies in response to sea level, which is attributed to proximity and availability of sediment. While mean turbidite recurrence is similar to the seismogenic El Asnam fault in Algeria, geochemical analysis reveals not all turbidites were sourced from the Algerian margin. The basin plain record is instead an amalgamation of flows from Algeria, Sardinia, and river fed systems further to the north, many of which were not earthquake-triggered. Thus, such distal basin plain settings are not ideal sites for turbidite palaoeseimology. Boxcores from the eastern Algerian slope reveal a thin silty turbidite dated to ~700 ya. Given its similar appearance across a widespread area and correlative age, the turbidite is inferred to have been earthquake-triggered. More recent earthquakes that have affected the Algerian slope are not recorded, however. Unlike the central and western Algerian slopes, the eastern part lacks canyons and had limited sediment

Dynamic triggering potential of large earthquakes recorded by the EarthScope U.S. Transportable Array using a frequency domain detection method

NASA Astrophysics Data System (ADS)

Linville, L. M.; Pankow, K. L.; Kilb, D. L.; Velasco, A. A.; Hayward, C.

2013-12-01

Because of the abundance of data from the Earthscope U.S. Transportable Array (TA), data paucity and station sampling bias in the US are no longer significant obstacles to understanding some of the physical parameters driving dynamic triggering. Initial efforts to determine locations of dynamic triggering in the US following large earthquakes (M ≥ 8.0) during TA relied on a time domain detection algorithm which used an optimized short-term average to long-term average (STA/LTA) filter and resulted in an unmanageably large number of false positive detections. Specific site sensitivities and characteristic noise when coupled with changes in detection rates often resulted in misleading output. To navigate this problem, we develop a frequency domain detection algorithm that first pre-whitens each seismogram and then computes a broadband frequency stack of the data using a three hour time window beginning at the origin time of the mainshock. This method is successful because of the broadband nature of earthquake signals compared with the more band-limited high frequency picks that clutter results from time domain picking algorithms. Preferential band filtering of the frequency stack for individual events can further increase the accuracy and drive the detection threshold to below magnitude one, but at general cost to detection levels across large scale data sets. Of the 15 mainshocks studied, 12 show evidence of discrete spatial clusters of local earthquake activity occurring within the array during the mainshock coda. Most of this activity is in the Western US with notable sequences in Northwest Wyoming, Western Texas, Southern New Mexico and Western Montana. Repeat stations (associated with 2 or more mainshocks) are generally rare, but when occur do so exclusively in California and Nevada. Notably, two of the most prolific regions of seismicity following a single mainshock occur following the 2009 magnitude 8.1 Samoa (Sep 29, 2009, 17:48:10) event, in areas with few

Seismicity in 2010 and major earthquakes recorded and located in Costa Rica from 1983 until 2012, by the local OVSICORI-UNA seismic network

NASA Astrophysics Data System (ADS)

Ronnie, Q.; Segura, J.; Burgoa, B.; Jimenez, W.; McNally, K. C.

2013-05-01

This work is the result of the analysis of existing information in the earthquake database of the Observatorio Sismológico y Vulcanológico de Costa Rica, Universidad Nacional (OVSICORI-UNA), and seeks disclosure of basic seismological information recorded and processed in 2010. In this year there was a transition between the software used to record, store and locate earthquakes. During the first three months of 2010, we used Earthworm (http://folkworm.ceri.memphis.edu/ew-doc), SEISAN (Haskov y Ottemoller, 1999) and Hypocenter (Lienert y Haskov, 1995) to capture, store and locate the earthquakes, respectively; in April 2010, ANTELOPE (http://www.brtt.com/software.html) start to be used for recording and storing and GENLOC (Fan at al, 2006) and LOCSAT (Bratt and Bache 1988), to locate earthquakes. GENLOC was used for local events and LOCSAT for regional and distant earthquakes. The local earthquakes were located using the 1D velocity model of Quintero and Kissling (2001) and for regional and distant earthquakes IASPEI91 (Kennett and Engdahl, 1991) was used. All the events for 2010 and shown in this work were rechecked by the authors. We located 3903 earthquakes in and around Costa Rica and 746 regional and distant seismic events were recorded (see Figure 1). In this work we also give a summary of major earthquakes recorded and located by OVSICORI-UNA network between 1983 and 2012. Seismicity recorded by OVSICORI-UNA network in 2010

The 5th July 1930 earthquake at Montilla (S Spain). Use of regionally recorded smoked paper seismograms

NASA Astrophysics Data System (ADS)

Batlló, J.; Stich, D.; Macià, R.; Morales, J.

2009-04-01

On the night of 5th July 1930 a damaging earthquake struck the town of Montilla (near Córdoba, S-Spain) and its surroundings. Magnitude estimation for this earthquake is M=5, and its epicentral intensity has been evaluated as VIII (MSK). Even it is an earthquake of moderate size, it is the largest one in-strumentally recorded in this region. This makes this event of interest for a better definition of the regional seismicity. For this reason we decided to study a new its source from the analysis of the available contemporary seismograms and related documents. A total of 25 seismograms from 11 seismic stations have been collected and digitized. Processing of some of the records has been difficult because they were obtained from microfilm or contemporary reproductions on journals. Most of them are on smoked paper and recorded at regional distances. This poses a good opportunity to test the limits of the use of such low frequency - low dynamics recorded seismograms for the study of regional events. Results are promising: Using such regional seismograms the event has been relocated, its magnitude recalculated (Mw 5.1) and inversion of waveforms to elucidate its focal mechanism has been performed. We present the results of this research and its consequences for the regional seismicity and we compare them with present smaller earthquakes occurred in the same place and with the results obtained for earthquakes of similar size occurred more to the East on 1951.

North Anna Nuclear Power Plant Strong Motion Records of the Mineral, Virginia Earthquake of August 23, 2011

NASA Astrophysics Data System (ADS)

Graizer, V.

2012-12-01

The MW 5.8 Mineral, Virginia earthquake was recorded at a relatively short epicentral distance of about 18 km at the North Anna Nuclear Power Plant (NPP) by the SMA-3 magnetic tape digital accelerographs installed inside the plant's containment at the foundation and deck levels. The North Anna NPP is operated by the Virginia Electric and Power Company (VEPCO) and has two pressurized water reactors (PWR) units that began operation in 1978 and 1980, respectively. Following the earthquake, both units were safely shutdown. The strong-motion records were processed to get velocity, displacement, Fourier and 5% damped response spectra. The basemat record demonstrated relatively high amplitudes of acceleration of 0.26 g and velocity of 13.8 cm/sec with a relatively short duration of strong motion of 2-3 sec. Recorded 5% damped Response Spectra exceed Design Basis Earthquake for the existing Units 1 and 2, while comprehensive plant inspections performed by VEPCO and U.S. Nuclear Regulatory Commission have concluded that the damage to the plant was minimal not affecting any structures and equipment significant to plant operation. This can be explained in part by short duration of the earthquake ground motion at the plant. The North Anna NPP did not have free-field strong motion instrumentation at the time of the earthquake. Since the containment is founded on rock there is a tendency to consider basemat record as an approximation of the free-field recording. However, comparisons of deck and basemat records demonstrate that the basemat recording is also affected by structural resonance frequencies higher than 3 Hz. Structural resonances in the frequency range of 3-4 Hz can at least partially explain significant exceedance of observed motions relative to ground motion calculated using ground motion prediction equations.cceleration, velocity and displacement at the North Anna NPP basemat level. Amplitudes of acceleration, velocity and displacement at basemat and deck levels

Empirical Green's functions from small earthquakes: A waveform study of locally recorded aftershocks of the 1971 San Fernando earthquake

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchings, L.; Wu, F.

1990-02-10

Seismograms from 52 aftershocks of the 1971 San Fernando earthquake recorded at 25 stations distributed across the San Fernando Valley are examined to identify empirical Green's functions, and characterize the dependence of their waveforms on moment, focal mechanism, source and recording site spatial variations, recording site geology, and recorded frequency band. Recording distances ranged from 3.0 to 33.0 km, hypocentral separations ranged from 0.22 to 28.4 km, and recording site separations ranged from 0.185 to 24.2 km. The recording site geologies are diorite gneiss, marine and nonmarine sediments, and alluvium of varying thicknesses. Waveforms of events with moment below aboutmore » 1.5 {times} 10{sup 21} dyn cm are independent of the source-time function and are termed empirical Green's functions. Waveforms recorded at a particular station from events located within 1.0 to 3.0 km of each other, depending upon site geology, with very similar focal mechanism solutions are nearly identical for frequencies up to 10 Hz. There is no correlation to waveforms between recording sites at least 1.2 km apart, and waveforms are clearly distinctive for two sites 0.185 km apart. The geologic conditions of the recording site dominate the character of empirical Green's functions. Even for source separations of up to 20.0 km, the empirical Green's functions at a particular site are consistent in frequency content, amplification, and energy distribution. Therefore, it is shown that empirical Green's functions can be used to obtain site response functions. The observations of empirical Green's functions are used as a basis for developing the theory for using empirical Green's functions in deconvolution for source pulses and synthesis of seismograms of larger earthquakes.« less

Detection of change points in underlying earthquake rates, with application to global mega-earthquakes

NASA Astrophysics Data System (ADS)

Touati, Sarah; Naylor, Mark; Main, Ian

2016-02-01

The recent spate of mega-earthquakes since 2004 has led to speculation of an underlying change in the global `background' rate of large events. At a regional scale, detecting changes in background rate is also an important practical problem for operational forecasting and risk calculation, for example due to volcanic processes, seismicity induced by fluid injection or withdrawal, or due to redistribution of Coulomb stress after natural large events. Here we examine the general problem of detecting changes in background rate in earthquake catalogues with and without correlated events, for the first time using the Bayes factor as a discriminant for models of varying complexity. First we use synthetic Poisson (purely random) and Epidemic-Type Aftershock Sequence (ETAS) models (which also allow for earthquake triggering) to test the effectiveness of many standard methods of addressing this question. These fall into two classes: those that evaluate the relative likelihood of different models, for example using Information Criteria or the Bayes Factor; and those that evaluate the probability of the observations (including extreme events or clusters of events) under a single null hypothesis, for example by applying the Kolmogorov-Smirnov and `runs' tests, and a variety of Z-score tests. The results demonstrate that the effectiveness among these tests varies widely. Information Criteria worked at least as well as the more computationally expensive Bayes factor method, and the Kolmogorov-Smirnov and runs tests proved to be the relatively ineffective in reliably detecting a change point. We then apply the methods tested to events at different thresholds above magnitude M ≥ 7 in the global earthquake catalogue since 1918, after first declustering the catalogue. This is most effectively done by removing likely correlated events using a much lower magnitude threshold (M ≥ 5), where triggering is much more obvious. We find no strong evidence that the background rate of large

MyShake: A smartphone seismic network for earthquake early warning and beyond.

PubMed

Kong, Qingkai; Allen, Richard M; Schreier, Louis; Kwon, Young-Woo

2016-02-01

Large magnitude earthquakes in urban environments continue to kill and injure tens to hundreds of thousands of people, inflicting lasting societal and economic disasters. Earthquake early warning (EEW) provides seconds to minutes of warning, allowing people to move to safe zones and automated slowdown and shutdown of transit and other machinery. The handful of EEW systems operating around the world use traditional seismic and geodetic networks that exist only in a few nations. Smartphones are much more prevalent than traditional networks and contain accelerometers that can also be used to detect earthquakes. We report on the development of a new type of seismic system, MyShake, that harnesses personal/private smartphone sensors to collect data and analyze earthquakes. We show that smartphones can record magnitude 5 earthquakes at distances of 10 km or less and develop an on-phone detection capability to separate earthquakes from other everyday shakes. Our proof-of-concept system then collects earthquake data at a central site where a network detection algorithm confirms that an earthquake is under way and estimates the location and magnitude in real time. This information can then be used to issue an alert of forthcoming ground shaking. MyShake could be used to enhance EEW in regions with traditional networks and could provide the only EEW capability in regions without. In addition, the seismic waveforms recorded could be used to deliver rapid microseism maps, study impacts on buildings, and possibly image shallow earth structure and earthquake rupture kinematics.

Seismo-Acoustic Generation by Earthquakes and Explosions and Near-Regional Propagation

DTIC Science & Technology

2009-09-30

earthquakes generate infrasound . Three infrasonic arrays in Utah (BGU, EPU, and NOQ), one in Nevada (NVIAR), and one in Wyoming (PDIAR) recorded...Katz, and C. Hayward (2009b). The F-detector Revisited: An Improved Strategy for Signal Detection at Seismic and Infrasound Arrays , Bull. Seism. Soc...sources. RESEARCH ACCOMPLISHED Infrasound Observations of the Wells Earthquake Most studies documenting earthquake - generated infrasound are based

Detecting and Characterizing Repeating Earthquake Sequences During Volcanic Eruptions

NASA Astrophysics Data System (ADS)

Tepp, G.; Haney, M. M.; Wech, A.

2017-12-01

A major challenge in volcano seismology is forecasting eruptions. Repeating earthquake sequences often precede volcanic eruptions or lava dome activity, providing an opportunity for short-term eruption forecasting. Automatic detection of these sequences can lead to timely eruption notification and aid in continuous monitoring of volcanic systems. However, repeating earthquake sequences may also occur after eruptions or along with magma intrusions that do not immediately lead to an eruption. This additional challenge requires a better understanding of the processes involved in producing these sequences to distinguish those that are precursory. Calculation of the inverse moment rate and concepts from the material failure forecast method can lead to such insights. The temporal evolution of the inverse moment rate is observed to differ for precursory and non-precursory sequences, and multiple earthquake sequences may occur concurrently. These observations suggest that sequences may occur in different locations or through different processes. We developed an automated repeating earthquake sequence detector and near real-time alarm to send alerts when an in-progress sequence is identified. Near real-time inverse moment rate measurements can further improve our ability to forecast eruptions by allowing for characterization of sequences. We apply the detector to eruptions of two Alaskan volcanoes: Bogoslof in 2016-2017 and Redoubt Volcano in 2009. The Bogoslof eruption produced almost 40 repeating earthquake sequences between its start in mid-December 2016 and early June 2017, 21 of which preceded an explosive eruption, and 2 sequences in the months before eruptive activity. Three of the sequences occurred after the implementation of the alarm in late March 2017 and successfully triggered alerts. The nearest seismometers to Bogoslof are over 45 km away, requiring a detector that can work with few stations and a relatively low signal-to-noise ratio. During the Redoubt

Automatic arrival time detection for earthquakes based on Modified Laplacian of Gaussian filter

NASA Astrophysics Data System (ADS)

Saad, Omar M.; Shalaby, Ahmed; Samy, Lotfy; Sayed, Mohammed S.

2018-04-01

Precise identification of onset time for an earthquake is imperative in the right figuring of earthquake's location and different parameters that are utilized for building seismic catalogues. P-wave arrival detection of weak events or micro-earthquakes cannot be precisely determined due to background noise. In this paper, we propose a novel approach based on Modified Laplacian of Gaussian (MLoG) filter to detect the onset time even in the presence of very weak signal-to-noise ratios (SNRs). The proposed algorithm utilizes a denoising-filter algorithm to smooth the background noise. In the proposed algorithm, we employ the MLoG mask to filter the seismic data. Afterward, we apply a Dual-threshold comparator to detect the onset time of the event. The results show that the proposed algorithm can detect the onset time for micro-earthquakes accurately, with SNR of -12 dB. The proposed algorithm achieves an onset time picking accuracy of 93% with a standard deviation error of 0.10 s for 407 field seismic waveforms. Also, we compare the results with short and long time average algorithm (STA/LTA) and the Akaike Information Criterion (AIC), and the proposed algorithm outperforms them.

Effect of baseline corrections on response spectra for two recordings of the 1999 Chi-Chi, Taiwan, earthquake

USGS Publications Warehouse

Boore, David M.

1999-01-01

Displacements derived from the accelerogram recordings of the 1999 Chi-Chi, Taiwan earthquake at stations TCU078 and TCU129 show drifts when only a simple baseline derived from the pre-event portion of the record is removed from the records. The appearance of the velocity and displacement records suggests that changes in the zero-level of the acceleration are responsible for these drifts. The source of the shifts in zero-level are unknown, but might include tilts in the instruments or the response of the instruments to strong shaking. This note illustrates the effect on the velocity, displacement, and response spectra of several schemes for accounting for these baseline shifts. The most important conclusion for earthquake engineering purposes is that the response spectra for periods less than about 20 sec are unaffected by the baseline correction. The results suggest, however, that staticdisplac ements estimated from the instruments should be used with caution. Although limited to the analysis of only two recordings, the results may have more general significance both for the many other recordings of this earthquake and for data that will be obtained in the future from similar high-quality accelerograph networks now being installed or soon to be installed in many parts of the world.

Signatures of the seismic source in EMD-based characterization of the 1994 Northridge, California, earthquake recordings

USGS Publications Warehouse

Zhang, R.R.; Ma, S.; Hartzell, S.

2003-01-01

In this article we use empirical mode decomposition (EMD) to characterize the 1994 Northridge, California, earthquake records and investigate the signatures carried over from the source rupture process. Comparison of the current study results with existing source inverse solutions that use traditional data processing suggests that the EMD-based characterization contains information that sheds light on aspects of the earthquake rupture process. We first summarize the fundamentals of the EMD and illustrate its features through the analysis of a hypothetical and a real record. Typically, the Northridge strong-motion records are decomposed into eight or nine intrinsic mode functions (IMF's), each of which emphasizes a different oscillation mode with different amplitude and frequency content. The first IMF has the highest-frequency content; frequency content decreases with an increase in IMF component. With the aid of a finite-fault inversion method, we then examine aspects of the source of the 1994 Northridge earthquake that are reflected in the second to fifth IMF components. This study shows that the second IMF is predominantly wave motion generated near the hypocenter, with high-frequency content that might be related to a large stress drop associated with the initiation of the earthquake. As one progresses from the second to the fifth IMF component, there is a general migration of the source region away from the hypocenter with associated longer-period signals as the rupture propagates. This study suggests that the different IMF components carry information on the earthquake rupture process that is expressed in their different frequency bands.

OMG Earthquake! Can Twitter improve earthquake response?

NASA Astrophysics Data System (ADS)

Earle, P. S.; Guy, M.; Ostrum, C.; Horvath, S.; Buckmaster, R. A.

2009-12-01

The U.S. Geological Survey (USGS) is investigating how the social networking site Twitter, a popular service for sending and receiving short, public, text messages, can augment its earthquake response products and the delivery of hazard information. The goal is to gather near real-time, earthquake-related messages (tweets) and provide geo-located earthquake detections and rough maps of the corresponding felt areas. Twitter and other social Internet technologies are providing the general public with anecdotal earthquake hazard information before scientific information has been published from authoritative sources. People local to an event often publish information within seconds via these technologies. In contrast, depending on the location of the earthquake, scientific alerts take between 2 to 20 minutes. Examining the tweets following the March 30, 2009, M4.3 Morgan Hill earthquake shows it is possible (in some cases) to rapidly detect and map the felt area of an earthquake using Twitter responses. Within a minute of the earthquake, the frequency of “earthquake” tweets rose above the background level of less than 1 per hour to about 150 per minute. Using the tweets submitted in the first minute, a rough map of the felt area can be obtained by plotting the tweet locations. Mapping the tweets from the first six minutes shows observations extending from Monterey to Sacramento, similar to the perceived shaking region mapped by the USGS “Did You Feel It” system. The tweets submitted after the earthquake also provided (very) short first-impression narratives from people who experienced the shaking. Accurately assessing the potential and robustness of a Twitter-based system is difficult because only tweets spanning the previous seven days can be searched, making a historical study impossible. We have, however, been archiving tweets for several months, and it is clear that significant limitations do exist. The main drawback is the lack of quantitative information

Application of a net-based baseline correction scheme to strong-motion records of the 2011 Mw 9.0 Tohoku earthquake

NASA Astrophysics Data System (ADS)

Tu, Rui; Wang, Rongjiang; Zhang, Yong; Walter, Thomas R.

2014-06-01

The description of static displacements associated with earthquakes is traditionally achieved using GPS, EDM or InSAR data. In addition, displacement histories can be derived from strong-motion records, allowing an improvement of geodetic networks at a high sampling rate and a better physical understanding of earthquake processes. Strong-motion records require a correction procedure appropriate for baseline shifts that may be caused by rotational motion, tilting and other instrumental effects. Common methods use an empirical bilinear correction on the velocity seismograms integrated from the strong-motion records. In this study, we overcome the weaknesses of an empirically based bilinear baseline correction scheme by using a net-based criterion to select the timing parameters. This idea is based on the physical principle that low-frequency seismic waveforms at neighbouring stations are coherent if the interstation distance is much smaller than the distance to the seismic source. For a dense strong-motion network, it is plausible to select the timing parameters so that the correlation coefficient between the velocity seismograms of two neighbouring stations is maximized after the baseline correction. We applied this new concept to the KiK-Net and K-Net strong-motion data available for the 2011 Mw 9.0 Tohoku earthquake. We compared the derived coseismic static displacement with high-quality GPS data, and with the results obtained using empirical methods. The results show that the proposed net-based approach is feasible and more robust than the individual empirical approaches. The outliers caused by unknown problems in the measurement system can be easily detected and quantified.

MyShake: A smartphone seismic network for earthquake early warning and beyond

PubMed Central

Kong, Qingkai; Allen, Richard M.; Schreier, Louis; Kwon, Young-Woo

2016-01-01

Large magnitude earthquakes in urban environments continue to kill and injure tens to hundreds of thousands of people, inflicting lasting societal and economic disasters. Earthquake early warning (EEW) provides seconds to minutes of warning, allowing people to move to safe zones and automated slowdown and shutdown of transit and other machinery. The handful of EEW systems operating around the world use traditional seismic and geodetic networks that exist only in a few nations. Smartphones are much more prevalent than traditional networks and contain accelerometers that can also be used to detect earthquakes. We report on the development of a new type of seismic system, MyShake, that harnesses personal/private smartphone sensors to collect data and analyze earthquakes. We show that smartphones can record magnitude 5 earthquakes at distances of 10 km or less and develop an on-phone detection capability to separate earthquakes from other everyday shakes. Our proof-of-concept system then collects earthquake data at a central site where a network detection algorithm confirms that an earthquake is under way and estimates the location and magnitude in real time. This information can then be used to issue an alert of forthcoming ground shaking. MyShake could be used to enhance EEW in regions with traditional networks and could provide the only EEW capability in regions without. In addition, the seismic waveforms recorded could be used to deliver rapid microseism maps, study impacts on buildings, and possibly image shallow earth structure and earthquake rupture kinematics. PMID:26933682

Sliding history and energy budget recorded in a frozen mantle earthquake

NASA Astrophysics Data System (ADS)

Ferrand, Thomas P.; Labrousse, Loïc; Hilairet, Nadège; Schubnel, Alexandre

2017-04-01

In the Balmuccia massif (NW Italy), pseudotachylytes (PST) are found within a spinel lherzolite. Coming from the solidification of the melt generated during seismic rupture, these rocks constitute a geological record of fossilized earthquakes. Here, combining field observations, Raman spectrometry and Electron Back-Scattered Diffraction (EBSD), we decipher the sliding history of an ancient Mw >6 earthquake. The earthquake fault displays a 1-1.2 m strike-slip component. The average width of the principal fault plane is about 5 mm. A dense network of thin (20-200 µm) faults and injection veins decorates this principal slip surface. Ultramylonitic faults, filled with olivine (0.2-2 µm), pyroxenes and Al-spinel exhibit strong olivine fabric, with (010) planes parallel to the sliding of the fault and [100] direction parallel to the slip direction. The EBSD pole figure for the [100] direction shows an angle of about 40° with respect to Z-axis, indicating a non-negligible dip-slip component of 1.2-1.5 m, i.e. a probable total relative displacement of 1.6-1.9 m. The olivine fabric is consistent with partial melting and/or high temperature (> 1250 °C) diffusion-accommodated grain boundary sliding, which proves: 1) that the ultramylonite originates from a recrystallized melt; 2) that the earthquake occurred at a depth greater than 35 km (stable Al-spinel, no plagioclase). Raman spectrometry in micrometric injectites reveals amorphous material, with water content of 1-2 wt%, structurally bounded. Assuming a peak temperature of 1600-1800°C during sliding, the melt viscosity was < 1 Pa s. Fracture surface energy and thermally dissipated energy are estimated from fracture density and melt volume (including injected volume) around 50 kJ/m2 and 50 MJ/m2 respectively. Considering a metric displacement, an average melting width of 1 cm and high normal stress, > 1 GPa, this yields a dynamic friction coefficient << 0.1, which demonstrates that complete fault lubrication occurred

Using giant piston coring within IODP to track past earthquakes in the sedimentary record along the Japan Trench

NASA Astrophysics Data System (ADS)

Strasser, Michael

2017-04-01

"Submarine paleoseismology" is a promising approach to investigate deposits from the deep sea, where earthquakes leave traces preserved in stratigraphic succession. The concept of studying sedimentary event deposits for reconstructing past earthquake history and related impacts to the marine environment is increasingly being applied in various settings. However, at present we lack comprehensive data sets that allow conclusive distinctions between quality and completeness of the paleoseismic archives, as they may relate to different sediment transport, erosion and deposition processes vs. variability of intrinsic seismogenic behavior across different segments. Nevertheless, many recent studies, which are mostly based on conventional 10-m-long cores, demonstrate the potential of the research concept. With ECORD opening their mission specific platform approach to include giant piston coring within IODP, a new horizon has opened up for multi-coring expeditions fully dedicated to the rapidly growing field of submarine paleoseismology. IODP is uniquely positioned to address the complex feedback mechanisms between earthquake shaking and its manifestation in the marine archive, decipher related mass fluxes from the shallow to the deep see and to eventually provide longer records to constrain earthquake recurrence far beyond historical catalogues. Initially building on what sedimentary deposits were generated from the 2011 M9 Tohoku-oki earthquake, the Japan Trench is a promising study area to investigate earthquake-triggered sediment remobilization processes and how they become embedded in the stratigraphic record, and has thus been identified as a primary target for proposing giant piston coring within IODP. In this presentation we summarize recent results and available site survey data collected since the 2011 earthquake, comprising >50, 5-10m long piston and gravity cores from (i) trench-fill and graben-fill basin across the entire trench axis from 36° to 40.3° N (ii

Limitation of the Predominant-Period Estimator for Earthquake Early Warning and the Initial Rupture of Earthquakes

NASA Astrophysics Data System (ADS)

Yamada, T.; Ide, S.

2007-12-01

Earthquake early warning is an important and challenging issue for the reduction of the seismic damage, especially for the mitigation of human suffering. One of the most important problems in earthquake early warning systems is how immediately we can estimate the final size of an earthquake after we observe the ground motion. It is relevant to the problem whether the initial rupture of an earthquake has some information associated with its final size. Nakamura (1988) developed the Urgent Earthquake Detection and Alarm System (UrEDAS). It calculates the predominant period of the P wave (τp) and estimates the magnitude of an earthquake immediately after the P wave arrival from the value of τpmax, or the maximum value of τp. The similar approach has been adapted by other earthquake alarm systems (e.g., Allen and Kanamori (2003)). To investigate the characteristic of the parameter τp and the effect of the length of the time window (TW) in the τpmax calculation, we analyze the high-frequency recordings of earthquakes at very close distances in the Mponeng mine in South Africa. We find that values of τpmax have upper and lower limits. For larger earthquakes whose source durations are longer than TW, the values of τpmax have an upper limit which depends on TW. On the other hand, the values for smaller earthquakes have a lower limit which is proportional to the sampling interval. For intermediate earthquakes, the values of τpmax are close to their typical source durations. These two limits and the slope for intermediate earthquakes yield an artificial final size dependence of τpmax in a wide size range. The parameter τpmax is useful for detecting large earthquakes and broadcasting earthquake early warnings. However, its dependence on the final size of earthquakes does not suggest that the earthquake rupture is deterministic. This is because τpmax does not always have a direct relation to the physical quantities of an earthquake.

Designing and Implementing a Retrospective Earthquake Detection Framework at the U.S. Geological Survey National Earthquake Information Center

NASA Astrophysics Data System (ADS)

Patton, J.; Yeck, W.; Benz, H.

2017-12-01

The U.S. Geological Survey National Earthquake Information Center (USGS NEIC) is implementing and integrating new signal detection methods such as subspace correlation, continuous beamforming, multi-band picking and automatic phase identification into near-real-time monitoring operations. Leveraging the additional information from these techniques help the NEIC utilize a large and varied network on local to global scales. The NEIC is developing an ordered, rapid, robust, and decentralized framework for distributing seismic detection data as well as a set of formalized formatting standards. These frameworks and standards enable the NEIC to implement a seismic event detection framework that supports basic tasks, including automatic arrival time picking, social media based event detections, and automatic association of different seismic detection data into seismic earthquake events. In addition, this framework enables retrospective detection processing such as automated S-wave arrival time picking given a detected event, discrimination and classification of detected events by type, back-azimuth and slowness calculations, and ensuring aftershock and induced sequence detection completeness. These processes and infrastructure improve the NEIC's capabilities, accuracy, and speed of response. In addition, this same infrastructure provides an improved and convenient structure to support access to automatic detection data for both research and algorithmic development.

Analysing the 1811-1812 New Madrid earthquakes with recent instrumentally recorded aftershocks

USGS Publications Warehouse

Mueller, K.; Hough, S.E.; Bilham, R.

2004-01-01

Although dynamic stress changes associated with the passage of seismic waves are thought to trigger earthquakes at great distances, more than 60 per cent of all aftershocks appear to be triggered by static stress changes within two rupture lengths of a mainshock. The observed distribution of aftershocks may thus be used to infer details of mainshock rupture geometry. Aftershocks following large mid-continental earthquakes, where background stressing rates are low, are known to persist for centuries, and models based on rate-and-state friction laws provide theoretical support for this inference. Most past studies of the New Madrid earthquake sequence have indeed assumed ongoing microseismicity to be a continuing aftershock sequence. Here we use instrumentally recorded aftershock locations and models of elastic stress change to develop a kinematically consistent rupture scenario for three of the four largest earthquakes of the 1811-1812 New Madrid sequence. Our results suggest that these three events occurred on two contiguous faults, producing lobes of increased stress near fault intersections and end points, in areas where present-day microearthquakes have been hitherto interpreted as evidence of primary mainshock rupture. We infer that the remaining New Madrid mainshock may have occurred more than 200 km north of this region in the Wabash Valley of southern Indiana and Illinois-an area that contains abundant modern microseismicity, and where substantial liquefaction was documented by historic accounts. Our results suggest that future large midplate earthquake sequences may extend over a much broader region than previously suspected.

Discrimination of Man-Made Events and Tectonic Earthquakes in Utah Using Data Recorded at Local Distances

NASA Astrophysics Data System (ADS)

Tibi, R.; Young, C. J.; Koper, K. D.; Pankow, K. L.

2017-12-01

Seismic event discrimination methods exploit the differing characteristics—in terms of amplitude and/or frequency content—of the generated seismic phases among the event types to be classified. Most of the commonly used seismic discrimination methods are designed for regional data recorded at distances of about 200 to 2000 km. Relatively little attention has focused on discriminants for local distances (< 200 km), the range at which the smallest events are recorded. Short-period fundamental mode Rayleigh waves (Rg) are commonly observed on seismograms of man-made seismic events, and shallow, naturally occurring tectonic earthquakes recorded at local distances. We leverage the well-known notion that Rg amplitude decreases dramatically with increasing event depth to propose a new depth discriminant based on Rg-to-Sg spectral amplitude ratios. The approach is successfully used to discriminate shallow events from deeper tectonic earthquakes in the Utah region recorded at local distances (< 150 km) by the University of Utah Seismographic Stations (UUSS) regional seismic network. Using Mood's median test, we obtained probabilities of nearly zero that the median Rg-to-Sg spectral amplitude ratios are the same between shallow events on one side (including both shallow tectonic earthquakes and man-made events), and deeper earthquakes on the other side, suggesting that there is a statistically significant difference in the estimated Rg-to-Sg ratios between the two populations. We also observed consistent disparities between the different types of shallow events (e.g., explosions vs. mining-induced events), implying that it may be possible to separate the sub-populations that make up this group. This suggests that using local distance Rg-to-Sg spectral amplitude ratios one can not only discriminate shallow from deeper events, but may also be able to discriminate different populations of shallow events. We also experimented with Pg-to-Sg amplitude ratios in multi

Earthquakes in Virginia and vicinity 1774 - 2004

USGS Publications Warehouse

Tarr, Arthur C.; Wheeler, Russell L.

2006-01-01

This map summarizes two and a third centuries of earthquake activity. The seismic history consists of letters, journals, diaries, and newspaper and scholarly articles that supplement seismograph recordings (seismograms) dating from the early twentieth century to the present. All of the pre-instrumental (historical) earthquakes were large enough to be felt by people or to cause shaking damage to buildings and their contents. Later, widespread use of seismographs meant that tremors too small or distant to be felt could be detected and accurately located. Earthquakes are a legitimate concern in Virginia and parts of adjacent States. Moderate earthquakes cause slight local damage somewhere in the map area about twice a decade on the average. Additionally, many buildings in the map area were constructed before earthquake protection was added to local building codes. The large map shows all historical and instrumentally located earthquakes from 1774 through 2004.

The 2004 Parkfield, CA Earthquake: A Teachable Moment for Exploring Earthquake Processes, Probability, and Earthquake Prediction

NASA Astrophysics Data System (ADS)

Kafka, A.; Barnett, M.; Ebel, J.; Bellegarde, H.; Campbell, L.

2004-12-01

The occurrence of the 2004 Parkfield earthquake provided a unique "teachable moment" for students in our science course for teacher education majors. The course uses seismology as a medium for teaching a wide variety of science topics appropriate for future teachers. The 2004 Parkfield earthquake occurred just 15 minutes after our students completed a lab on earthquake processes and earthquake prediction. That lab included a discussion of the Parkfield Earthquake Prediction Experiment as a motivation for the exercises they were working on that day. Furthermore, this earthquake was recorded on an AS1 seismograph right in their lab, just minutes after the students left. About an hour after we recorded the earthquake, the students were able to see their own seismogram of the event in the lecture part of the course, which provided an excellent teachable moment for a lecture/discussion on how the occurrence of the 2004 Parkfield earthquake might affect seismologists' ideas about earthquake prediction. The specific lab exercise that the students were working on just before we recorded this earthquake was a "sliding block" experiment that simulates earthquakes in the classroom. The experimental apparatus includes a flat board on top of which are blocks of wood attached to a bungee cord and a string wrapped around a hand crank. Plate motion is modeled by slowly turning the crank, and earthquakes are modeled as events in which the block slips ("blockquakes"). We scaled the earthquake data and the blockquake data (using how much the string moved as a proxy for time) so that we could compare blockquakes and earthquakes. This provided an opportunity to use interevent-time histograms to teach about earthquake processes, probability, and earthquake prediction, and to compare earthquake sequences with blockquake sequences. We were able to show the students, using data obtained directly from their own lab, how global earthquake data fit a Poisson exponential distribution better

Very low frequency earthquakes in Tohoku-Oki recorded by short-period ocean bottom seismographs

NASA Astrophysics Data System (ADS)

Takahashi, H.; Hino, R.; Ohta, Y.; Uchida, N.; Suzuki, S.; Shinohara, M.; Nakatani, Y.; Matsuzawa, T.

2017-12-01

Various kind of slow earthquakes have been found along many plate boundary zones in the world (Obara, and Kato, 2016). In the Tohoku subduction zone where slow event activities have been considered insignificant, slow slip events associated with low frequency tremors were identified prior to the 2011 Tohoku-Oki earthquake based on seafloor geodetic and seismographical observations. Recently very low frequency earthquakes (VLFEs) have been discovered by inspecting onshore broad-band seismograms. Although the activity of the detected VLFEs is low and the VLFEs occurred in the limited area, VLFEs tends to occur successively in a short time period. In this study, we try to characterize the VLFEs along the Japan Trench based on the seismograms obtained by the instruments deployed near the estimated epicenters.Temporary seismic observations using Ocean Bottom Seismometers (OBSs) have been carried out several times after the 2011 Tohoku-Oki earthquake, and several VLFE activities were observed during the deployments of the OBSs. Amplitudes of horizontal component seismograms of the OBSs grow shortly after the estimated origin times of the VLFEs identified by the onshore seismograms, even though the sensors are 4.5 Hz geophones. It is difficult to recognize evident onsets of P or S waves, correspondence between order of arrivals of discernible wave packets and their amplitudes suggests that these wave packets are seismic signals radiated from the VLFE sources. The OBSs detect regular local earthquakes of the similar magnitudes as the VLFEs. Signal powers of the possible VLFE seismograms are comparable to the regular earthquakes in the frequency range < 1 Hz, while significant deficiency of higher frequency components are observed.

Uranium/Thorium Dating and Growth Laminae Counting of Stalagmites Reveal a Record of Major Earthquakes in the Midwestern US

NASA Astrophysics Data System (ADS)

Zhang, Z.; Lundstrom, C.; Panno, S.; Hackley, K. C.; Fouke, B. W.; Curry, B.

2009-12-01

The recurrence interval of large New Madrid Seismic Zone (NMSZ) earthquakes is uncertain because of the limited number and likely incomplete nature of the record of dated seismic events. Data on paleoseismicity in this area is necessary for refining estimates of a recurrence interval for these earthquakes and for characterizing the geophysical nature of the NMSZ. Studies of the paleoseismic history of the NMSZ have previously used liquefaction features and flood plain deposits along the Mississippi River to estimate recurrence interval with considerable uncertainties. More precise estimates of the number and ages of paleoseismic events would enhance the ability of federal, state, and local agencies to make critical preparedness decisions. Initiation of new speleothems (cave deposits) has been shown in several localities to record large earthquake events. Our ongoing work in caves of southwestern Illinois, Missouri, Indiana and Arkansas has used both U/Th age dating techniques and growth laminae counting of actively growing stalagmites to determine the age of initiation of stalagmites in caves across the Midwestern U.S. These age initiations cluster around two known events, the great NMSZ earthquakes of 1811-1812 and the Missouri earthquake of 1917, suggesting that cave deposits in this region constitute a unique record of paleo-seismic history of the NMSZ. Furthermore, the U-Th disequilibria growth laminae ages of young, white stalagmites and of older stalagmites on which they grew, plus published Holocene stalagmite ages of initiation and regrowth from Missouri caves, are all coincident with suspected NMSZ earthquakes based on liquefaction and other paleoseimic techniques. We hypothesize that these speleothems were initiated by earthquake-induced opening/closing of fracture-controlled flowpaths in the ceilings of cave passages.

Prompt gravity signal induced by the 2011 Tohoku-Oki earthquake

PubMed Central

Montagner, Jean-Paul; Juhel, Kévin; Barsuglia, Matteo; Ampuero, Jean Paul; Chassande-Mottin, Eric; Harms, Jan; Whiting, Bernard; Bernard, Pascal; Clévédé, Eric; Lognonné, Philippe

2016-01-01

Transient gravity changes are expected to occur at all distances during an earthquake rupture, even before the arrival of seismic waves. Here we report on the search of such a prompt gravity signal in data recorded by a superconducting gravimeter and broadband seismometers during the 2011 Mw 9.0 Tohoku-Oki earthquake. During the earthquake rupture, a signal exceeding the background noise is observed with a statistical significance higher than 99% and an amplitude of a fraction of μGal, consistent in sign and order of magnitude with theoretical predictions from a first-order model. While prompt gravity signal detection with state-of-the-art gravimeters and seismometers is challenged by background seismic noise, its robust detection with gravity gradiometers under development could open new directions in earthquake seismology, and overcome fundamental limitations of current earthquake early-warning systems imposed by the propagation speed of seismic waves. PMID:27874858

Prompt gravity signal induced by the 2011 Tohoku-Oki earthquake.

PubMed

Montagner, Jean-Paul; Juhel, Kévin; Barsuglia, Matteo; Ampuero, Jean Paul; Chassande-Mottin, Eric; Harms, Jan; Whiting, Bernard; Bernard, Pascal; Clévédé, Eric; Lognonné, Philippe

2016-11-22

Transient gravity changes are expected to occur at all distances during an earthquake rupture, even before the arrival of seismic waves. Here we report on the search of such a prompt gravity signal in data recorded by a superconducting gravimeter and broadband seismometers during the 2011 Mw 9.0 Tohoku-Oki earthquake. During the earthquake rupture, a signal exceeding the background noise is observed with a statistical significance higher than 99% and an amplitude of a fraction of μGal, consistent in sign and order of magnitude with theoretical predictions from a first-order model. While prompt gravity signal detection with state-of-the-art gravimeters and seismometers is challenged by background seismic noise, its robust detection with gravity gradiometers under development could open new directions in earthquake seismology, and overcome fundamental limitations of current earthquake early-warning systems imposed by the propagation speed of seismic waves.

Prompt gravity anomaly induced to the 2011Tohoku-Oki earthquake

NASA Astrophysics Data System (ADS)

Montagner, Jean-Paul; Juhel, Kevin; Barsuglia, Matteo; Ampuero, Jean-Paul; Harms, Jan; Chassande-Mottin, Eric; Whiting, Bernard; Bernard, Pascal; Clévédé, Eric; Lognonné, Philippe

2017-04-01

Transient gravity changes are expected to occur at all distances during an earthquake rupture, even before the arrival of seismic waves. Here we report on the search of such a prompt gravity signal in data recorded by a superconducting gravimeter and broadband seismometers during the 2011 Mw 9.0 Tohoku-Oki earthquake. During the earthquake rupture, a signal exceeding the background noise is observed with a statistical significance higher than 99% and an amplitude of a fraction of μGal, consistent in sign and order-of-magnitude with theoretical predictions from a first-order model. While prompt gravity signal detection with state-of-the-art gravimeters and seismometers is challenged by background seismic noise, its robust detection with gravity gradiometers under development could open new directions in earthquake seismology, and overcome fundamental limitations of current earthquake early-warning systems (EEWS) imposed by the propagation speed of seismic waves.

An efficient repeating signal detector to investigate earthquake swarms

NASA Astrophysics Data System (ADS)

Skoumal, Robert J.; Brudzinski, Michael R.; Currie, Brian S.

2016-08-01

Repetitive earthquake swarms have been recognized as key signatures in fluid injection induced seismicity, precursors to volcanic eruptions, and slow slip events preceding megathrust earthquakes. We investigate earthquake swarms by developing a Repeating Signal Detector (RSD), a computationally efficient algorithm utilizing agglomerative clustering to identify similar waveforms buried in years of seismic recordings using a single seismometer. Instead of relying on existing earthquake catalogs of larger earthquakes, RSD identifies characteristic repetitive waveforms by rapidly identifying signals of interest above a low signal-to-noise ratio and then grouping based on spectral and time domain characteristics, resulting in dramatically shorter processing time than more exhaustive autocorrelation approaches. We investigate seismicity in four regions using RSD: (1) volcanic seismicity at Mammoth Mountain, California, (2) subduction-related seismicity in Oaxaca, Mexico, (3) induced seismicity in Central Alberta, Canada, and (4) induced seismicity in Harrison County, Ohio. In each case, RSD detects a similar or larger number of earthquakes than existing catalogs created using more time intensive methods. In Harrison County, RSD identifies 18 seismic sequences that correlate temporally and spatially to separate hydraulic fracturing operations, 15 of which were previously unreported. RSD utilizes a single seismometer for earthquake detection which enables seismicity to be quickly identified in poorly instrumented regions at the expense of relying on another method to locate the new detections. Due to the smaller computation overhead and success at distances up to ~50 km, RSD is well suited for real-time detection of low-magnitude earthquake swarms with permanent regional networks.

Seismic Strong Motion Array Project (SSMAP) to Record Future Large Earthquakes in the Nicoya Peninsula area, Costa Rica

NASA Astrophysics Data System (ADS)

Simila, G.; McNally, K.; Quintero, R.; Segura, J.

2006-12-01

The seismic strong motion array project (SSMAP) for the Nicoya Peninsula in northwestern Costa Rica is composed of 10 13 sites including Geotech A900/A800 accelerographs (three-component), Ref-Teks (three- component velocity), and Kinemetric Episensors. The main objectives of the array are to: 1) record and locate strong subduction zone mainshocks [and foreshocks, "early aftershocks", and preshocks] in Nicoya Peninsula, at the entrance of the Nicoya Gulf, and in the Papagayo Gulf regions of Costa Rica, and 2) record and locate any moderate to strong upper plate earthquakes triggered by a large subduction zone earthquake in the above regions. Our digital accelerograph array has been deployed as part of our ongoing research on large earthquakes in conjunction with the Earthquake and Volcano Observatory (OVSICORI) at the Universidad Nacional in Costa Rica. The country wide seismographic network has been operating continuously since the 1980's, with the first earthquake bulletin published more than 20 years ago, in 1984. The recording of seismicity and strong motion data for large earthquakes along the Middle America Trench (MAT) has been a major research project priority over these years, and this network spans nearly half the time of a "repeat cycle" (50 years) for large (Ms 7.5- 7.7) earthquakes beneath the Nicoya Peninsula, with the last event in 1950. Our long time co-collaborators include the seismology group OVSICORI, with coordination for this project by Dr. Ronnie Quintero and Mr. Juan Segura. Numerous international investigators are also studying this region with GPS and seismic stations (US, Japan, Germany, Switzerland, etc.). Also, there are various strong motion instruments operated by local engineers, for building purposes and mainly concentrated in the population centers of the Central Valley. The major goal of our project is to contribute unique scientific information pertaining to a large subduction zone earthquake and its related seismic activity when

GPS detection of ionospheric perturbation before the 13 February 2001, El Salvador earthquake

NASA Astrophysics Data System (ADS)

Plotkin, V. V.

A large earthquake of M6.6 occurred on 13 February 2001 at 14:22:05 UT in El Salvador. We detected ionospheric perturbation before this earthquake using GPS data received from CORS network. Systematic decreases of ionospheric total electron content during two days before the earthquake onset were observed at set of stations near the earthquake location and probably in region of about 1000 km from epicenter. This result is consistent with that of investigators, which studied these phenomena with several observational techniques. However it is possible, that such TEC changes are simultaneously accompanied by changes due to solar wind parameters and Kp -index.

Updated determination of stress parameters for nine well-recorded earthquakes in eastern North America

USGS Publications Warehouse

Boore, David M.

2012-01-01

Stress parameters (Δσ) are determined for nine relatively well-recorded earthquakes in eastern North America for ten attenuation models. This is an update of a previous study by Boore et al. (2010). New to this paper are observations from the 2010 Val des Bois earthquake, additional observations for the 1988 Saguenay and 2005 Riviere du Loup earthquakes, and consideration of six attenuation models in addition to the four used in the previous study. As in that study, it is clear that Δσ depends strongly on the rate of geometrical spreading (as well as other model parameters). The observations necessary to determine conclusively which attenuation model best fits the data are still lacking. At this time, a simple 1/R model seems to give as good an overall fit to the data as more complex models.

Relocation of micro-earthquakes in the Yeongdeok offshore area, Korea using local and Ocean bottom seismometers

NASA Astrophysics Data System (ADS)

HAN, M.; Kim, K. H.; Park, S. C.; Lin, P. P.; Chen, P.; Chang, H.; Jang, J. P.; Kuo, B. Y.; Liao, Y. C.

2016-12-01

Seismicity in the East Sea of Korea has been relatively high during the last four decades of instrumental earthquake observation period. Yeongdeok offshore area is probably the most seismically active area in the East Sea. This study analyzes seismic signals to detect micro-earthquakes and determine their precise earthquake hypocenters in the Yeoungdeok offshore area using data recorded by the Korea National Seismic Network (KNSN) and a temporary ocean bottom seismographic network (OBSN-PNU) operated by Korea Meteorological Administration and Pusan National University, respectively. Continuous waveform data recorded at four seismic stations in the study area of KNSN between January 2007 and July 2016 are inspected to detect any repeating earthquakes by applying a waveform cross-correlation detector. More than 1,600 events are triggered. Events outside the study area or in poor waveform quality are removed from further analysis. Approximately 500 earthquakes are selected, most of which have gone unreported because their magnitudes are lower than the detection threshold of the routine earthquake monitoring. Events in the study area are also under bad azimuthal coverage because all stations are located on land and thus biased to the west. OBSN-PNU comprised three ocean bottom seismometers and operated to observe micro-earthquakes in the study area between February and August 2016. The same technique applied to the KNSN data has been applied to the OBSN-PNU data to detect micro-earthquakes. Precise earthquake hypocenters are determined using phase arrival times and waveform similarities. Resultant hypocenters are clustered to form a few lineaments. They are compared to the local geological and geophysical features to understand micro-earthquake activity in the area.

T-phase and tsunami pressure waveforms recorded by near-source IMS water-column hydrophone triplets during the 2015 Chile earthquake

NASA Astrophysics Data System (ADS)

Matsumoto, H.; Haralabus, G.; Zampolli, M.; Özel, N. M.

2016-12-01

Underwater acoustic signal waveforms recorded during the 2015 Chile earthquake (Mw 8.3) by the hydrophones of hydroacoustic station HA03, located at the Juan Fernandez Islands, are analyzed. HA03 is part of the Comprehensive Nuclear-Test-Ban Treaty International Monitoring System. The interest in the particular data set stems from the fact that HA03 is located only approximately 700 km SW from the epicenter of the earthquake. This makes it possible to study aspects of the signal associated with the tsunamigenic earthquake, which would be more difficult to detect had the hydrophones been located far from the source. The analysis shows that the direction of arrival of the T phase can be estimated by means of a three-step preprocessing technique which circumvents spatial aliasing caused by the hydrophone spacing, the latter being large compared to the wavelength. Following this preprocessing step, standard frequency-wave number analysis (F-K analysis) can accurately estimate back azimuth and slowness of T-phase signals. The data analysis also shows that the dispersive tsunami signals can be identified by the water-column hydrophones at the time when the tsunami surface gravity wave reaches the station.

GPS detection of ionospheric perturbations following the January 17, 1994, northridge earthquake

NASA Technical Reports Server (NTRS)

Calais, Eric; Minster, J. Bernard

1995-01-01

Sources such as atmospheric or buried explosions and shallow earthquakes producing strong vertical ground displacements produce pressure waves that propagate at infrasonic speeds in the atmosphere. At ionospheric altitudes low frequency acoustic waves are coupled to ionispheric gravity waves and induce variations in the ionoispheric electron density. Global Positioning System (GPS) data recorded in Southern California were used to compute ionospheric electron content time series for several days preceding and following the January 17, 1994, M(sub w) = 6.7 Northridge earthquake. An anomalous signal beginning several minutes after the earthquake with time delays that increase with distance from the epicenter was observed. The signal frequency and phase velocity are consistent with results from numerical models of atmospheric-ionospheric acoustic-gravity waves excited by seismic sources as well as previous electromagnetic sounding results. It is believed that these perturbations are caused by the ionospheric response to the strong ground displacement associated with the Northridge earthquake.

Discriminants and Detectors: Seismological Studies of Tsunami Earthquakes and Hurricane Microseisms

NASA Astrophysics Data System (ADS)

Ebeling, Carl W.

High energy natural hazards have potential to cause great damage and significant loss of life, but understanding of many lags behind what is required to mitigate their impacts. Of specific concern here are the estimation of tsunami hazard in the eastern Mediterranean; the more timely identification of tsunami earthquakes; and the use of microseisms to identify “missing” hurricanes, thus augmenting the traditional—but short, incomplete, and biased—observational hurricane record. Earthquake energy estimation and time- and frequency-domain time-series analyses applied to an array of historical analog and modern digital seismological data are used to address these problems. Improved estimations of the location, depth, moment magnitude, and focal mechanism of four of the largest Hellenic Arc earthquakes in the last century help to better understand seismic hazard there. Seismological reassessments combined with hydrodynamic simulations show that the tsunamis associated with two of them were not triggered by the earthquakes themselves but instead involved submarine slumping. Moments and estimates of radiated energy from 67 earthquakes taking place in the last twenty years in oceanic environments and recorded at regional and teleseismic distances are used to develop an empirical correction to the robust tsunami earthquake discriminant Theta. This extends its applicability to regional distances, thereby allowing earlier discrimination of tsunami earthquakes. Microseisms, which result from the interaction of ocean swell generated by energetic storms, are shown here to carry information about parent hurricanes and under favorable conditions can be used to detect them. Power variations of microseisms recorded at the Harvard, Massachusetts seismic station demonstrate that Saffir-Simpson category 5 hurricane Andrew (1992) can be identified when it is ˜2,000 km from the station and still at sea. Applied to an expanded data set of 66 hurricanes between 1992 and 2007 with

Earthquakes in Ohio and Vicinity 1776-2007

USGS Publications Warehouse

Dart, Richard L.; Hansen, Michael C.

2008-01-01

This map summarizes two and a third centuries of earthquake activity. The seismic history consists of letters, journals, diaries, and newspaper and scholarly articles that supplement seismograph recordings (seismograms) dating from the early twentieth century to the present. All of the pre-instrumental (historical) earthquakes were large enough to be felt by people or to cause shaking damage to buildings and their contents. Later, widespread use of seismographs meant that tremors too small or distant to be felt could be detected and accurately located. Earthquakes are a legitimate concern in Ohio and parts of adjacent States. Ohio has experienced more than 160 felt earthquakes since 1776. Most of these events caused no damage or injuries. However, 15 Ohio earthquakes resulted in property damage and some minor injuries. The largest historic earthquake in the state occurred in 1937. This event had an estimated magnitude of 5.4 and caused considerable damage in the town of Anna and in several other western Ohio communities. The large map shows all historical and instrumentally located earthquakes from 1776 through 2007.

High Frequency Cut-off Characteristics of Strong Ground Motion Records at Hard Sites, Subduction and Intra-Slab Earthquakes

NASA Astrophysics Data System (ADS)

Kagawa, T.; Tsurugi, M.; Irikura, K.

2006-12-01

A study on high frequency cut-off characteristics of strong ground motion is presented for subduction and intra- slab earthquakes in Japan. In the latest decade, observed records at hard sites are published by NIED, National Research Institute for Earth Science and Disaster Prevention, and JCOLD, Japan Commission on Large Dams. Especially, KiK-net and K-NET maintained by NIED have been providing high quality data to study high-frequency characteristics. Kagawa et al.(2003) studied the characteristics for crustal earthquakes. We apply the same methodology to the recently observed Japanese records due to subduction and intra-slab earthquakes. We assume a Butterworth type high-cut filter with limit frequency (fmax) and its power factor. These two parameters were derived from Fourier spectrum of observed records fitting the theoretical filter shape. After analyzing the result from view points of site, path, or source effects, an averaged filter model is proposed with its standard deviation. Kagawa et al.(2003) derived average as 8.3 Hz with power factor of 1.92. It is used for strong ground motion simulation. We will propose parameters for the high-cut filters of subduction and intra-slab earthquakes and compare them with the results by Kagawa et al.(2003). REFERENCES: Kagawa et al. (2003), 27JEES (in Japanese with English Abstract).

Crustal earthquake triggering by pre-historic great earthquakes on subduction zone thrusts

USGS Publications Warehouse

Sherrod, Brian; Gomberg, Joan

2014-01-01

Triggering of earthquakes on upper plate faults during and shortly after recent great (M>8.0) subduction thrust earthquakes raises concerns about earthquake triggering following Cascadia subduction zone earthquakes. Of particular regard to Cascadia was the previously noted, but only qualitatively identified, clustering of M>~6.5 crustal earthquakes in the Puget Sound region between about 1200–900 cal yr B.P. and the possibility that this was triggered by a great Cascadia thrust subduction thrust earthquake, and therefore portends future such clusters. We confirm quantitatively the extraordinary nature of the Puget Sound region crustal earthquake clustering between 1200–900 cal yr B.P., at least over the last 16,000. We conclude that this cluster was not triggered by the penultimate, and possibly full-margin, great Cascadia subduction thrust earthquake. However, we also show that the paleoseismic record for Cascadia is consistent with conclusions of our companion study of the global modern record outside Cascadia, that M>8.6 subduction thrust events have a high probability of triggering at least one or more M>~6.5 crustal earthquakes.

Tsunami history of an Oregon coastal lake reveals a 4600 yr record of great earthquakes on the Cascadia subduction zone

USGS Publications Warehouse

Kelsey, H.M.; Nelson, A.R.; Hemphill-Haley, E.; Witter, R.C.

2005-01-01

Bradley Lake, on the southern Oregon coastal plain, records local tsunamis and seismic shaking on the Cascadia subduction zone over the last 7000 yr. Thirteen marine incursions delivered landward-thinning sheets of sand to the lake from nearshore, beach, and dune environments to the west. Following each incursion, a slug of marine water near the bottom of the freshwater lake instigated a few-year-to-several-decade period of a brackish (??? 4??? salinity) lake. Four additional disturbances without marine incursions destabilized sideslopes and bottom sediment, producing a suspension deposit that blanketed the lake bottom. Considering the magnitude and duration of the disturbances necessary to produce Bradley Lake's marine incursions, a local tsunami generated by a great earthquake on the Cascadia subduction zone is the only accountable mechanism. Extreme ocean levels must have been at least 5-8 m above sea level, and the cumulative duration of each marine incursion must have been at least 10 min. Disturbances without marine incursions require seismic shaking as well. Over the 4600 yr period when Bradley Lake was an optimum tsunami recorder, tsunamis from Cascadia plate-boundary earthquakes came in clusters. Between 4600 and 2800 cal yr B.P., tsunamis occurred at the average frequency of ??? 3-4 every 1000 yr. Then, starting ???2800 cal yr B.P., there was a 930-1260 yr interval with no tsunamis. That gap was followed by a ???1000 yr period with 4 tsunamis. In the last millennium, a 670-750 yr gap preceded the A.D. 1700 earthquake and tsunami. The A.D. 1700 earthquake may be the first of a new cluster of plate-boundary earthquakes and accompanying tsunamis. Local tsunamis entered Bradley Lake an average of every 390 yr, whereas the portion of the Cascadia plate boundary that underlies Bradley Lake ruptured in a great earthquake less frequently, about once every 500 yr. Therefore, the entire length of the subduction zone does not rupture in every earthquake, and Bradley

Attenuation Characteristics of Strong Motions during the 2016 Kumamoto Earthquakes including Near-Field Records

NASA Astrophysics Data System (ADS)

Si, H.; Koketsu, K.; Miyake, H.; Ibrahim, R.

2016-12-01

During the two major earthquakes occurred in Kumamoto prefecture, at 21:26 on 14 April, 2016 (Mw 6.2, GCMT), and at 1:25 on 16 April, 2016 (Mw7.0, GCMT), a large number of strong ground motions were recorded, including those very close to the surface fault. In this study, we will discuss the attenuation characteristics of strong ground motions observed during the earthquakes. The data used in this study are mainly observed by K-NET, KiK-net, Osaka University, JMA and Kumamoto prefecture. The 5% damped acceleration response spectra (GMRotI50) are calculated based on the method proposed by Boore et al. (2006). PGA and PGV is defined as the larger one among the PGAs and PGVs of two horizontal components. The PGA, PGV, and GMRotI50 data were corrected to the bedrock with Vs of 1.5km/s based on the method proposed by Si et al. (2016) using the average shear wave velocity (Vs30) and the thickness of sediments over the bedrock. The thickness is estimated based on the velocity structure model provided by J-SHIS. We use a source model proposed by Koketsu et al. (2016) to calculate the fault distance and the median distance (MED) which defined as the closest distance from a station to the median line of the fault plane (Si et al., 2014). We compared the observed PGAs, PGVs, and GMRotI50 with the GMPEs developed in Japan using MED (Si et al., 2014). The predictions by the GMPEs are generally consistent with the observations during the two Kumamoto earthquakes. The results of the comparison also indicated that, (1) strong motion records from the earthquake on April 14th are generally consistent with the predictions by GMPE, however, at the periods of 0.5 to 2 seconds, several records close to the fault plane show larger amplitudes than the predictions by GMPE, including the KiK-net station Mashiki (KMMH16); (2) for the earthquake on April 16, the PGAs and GMRotI50 at periods from 0.1s to 0.4s with short distance from the fault plane are slightly smaller than the predictions by

Sensitivity to Regional Earthquake Triggering and Magnitude-Frequency Characteristics of Microseismicity Detected via Matched-Filter Analysis, Central Southern Alps, New Zealand

NASA Astrophysics Data System (ADS)

Boese, C. M.; Townend, J.; Chamberlain, C. J.; Warren-Smith, E.

2016-12-01

Microseismicity recorded since 2008 by the Southern Alps Microseismicity Borehole Array (SAMBA) and other predominantly short-period seismic networks deployed in the central Southern Alps, New Zealand, reveals distinctive patterns of triggering in response to regional seismicity (magnitudes larger than 5, epicentral distances of 100-500 km). Using matched-filter detection methods implemented in the EQcorrscan package (Chamberlain et al., in prep.), we analyze microseismicity occurring in several geographically distinct swarms in order to examine the responses of specific microearthquake sources to earthquakes of different sizes occurring at different distances and azimuths. The swarms exhibit complex responses to regional seismicity which reveal that microearthquake triggering in these cases involves a combination of extrinsic factors (related to the dynamic stresses produced by the regional earthquake) and intrinsic factors (controlled by the local state of stress and possibly by hydrogeological processes). We find also that the microearthquakes detected by individual templates have Gutenberg-Richter magnitude-frequency characteristics. Since the detected events, by design, have very similar hypocentres and focal mechanisms, the observed scaling pertains to a restricted set of fault planes.

Detecting metastable olivine wedge beneath Japan Sea with deep earthquake coda wave interferometry

NASA Astrophysics Data System (ADS)

Shen, Z.; Zhan, Z.

2017-12-01

It has been hypothesized for decades that the lower-pressure olivine phase would kinetically persist in the interior of slab into the transition zone, forming a low-velocity "Metastable Olivine Wedge" (MOW). MOW, if exists, would play a critical role in generating deep earthquakes and parachuting subducted slabs with its buoyancy. However, seismic evidences for MOW are still controversial, and it is suggested that MOW can only be detected using broadband waveforms given the wavefront healing effects for travel times. On the other hand, broadband waveforms are often complicated by shallow heterogeneities. Here we propose a new method using the source-side interferometry of deep earthquake coda to detect MOW. In this method, deep earthquakes are turned into virtual sensors with the reciprocity theorem, and the transient strain from one earthquake to the other is estimated by cross-correlating the coda from the deep earthquake pair at the same stations. This approach effectively isolates near-source structure from complicated shallow structures, hence provide finer resolution to deep slab structures. We apply this method to Japan subduction zone with Hi-Net data, and our preliminary result does not support a large MOW model (100km thick at 410km) as suggested by several previous studies. Metastable olivine at small scales or distributed in an incoherent manner in deep slabs may still be possible.

Far-field tsunami of 2017 Mw 8.1 Tehuantepec, Mexico earthquake recorded by Chilean tide gauge network: Implications for tsunami warning systems

NASA Astrophysics Data System (ADS)

González-Carrasco, J. F.; Benavente, R. F.; Zelaya, C.; Núñez, C.; Gonzalez, G.

2017-12-01

The 2017 Mw 8.1, Tehuantepec earthquake generated a moderated tsunami, which was registered in near-field tide gauges network activating a tsunami threat state for Mexico issued by PTWC. In the case of Chile, the forecast of tsunami waves indicate amplitudes less than 0.3 meters above the tide level, advising an informative state of threat, without activation of evacuation procedures. Nevertheless, during sea level monitoring of network we detect wave amplitudes (> 0.3 m) indicating a possible change of threat state. Finally, NTWS maintains informative level of threat based on mathematical filtering analysis of sea level records. After 2010 Mw 8.8, Maule earthquake, the Chilean National Tsunami Warning System (NTWS) has increased its observational capabilities to improve early response. Most important operational efforts have focused on strengthening tide gauge network for national area of responsibility. Furthermore, technological initiatives as Integrated Tsunami Prediction and Warning System (SIPAT) has segmented the area of responsibility in blocks to focus early warning and evacuation procedures on most affected coastal areas, while maintaining an informative state for distant areas of near-field earthquake. In the case of far-field events, NTWS follow the recommendations proposed by Pacific Tsunami Warning Center (PTWC), including a comprehensive monitoring of sea level records, such as tide gauges and DART (Deep-Ocean Assessment and Reporting of Tsunami) buoys, to evaluate the state of tsunami threat in the area of responsibility. The main objective of this work is to analyze the first-order physical processes involved in the far-field propagation and coastal impact of tsunami, including implications for decision-making of NTWS. To explore our main question, we construct a finite-fault model of the 2017, Mw 8.1 Tehuantepec earthquake. We employ the rupture model to simulate a transoceanic tsunami modeled by Neowave2D. We generate synthetic time series at

Fault structure in the Nepal Himalaya as illuminated by aftershocks of the 2015 Mw 7.8 Gorkha earthquake recorded by the local NAMASTE network

NASA Astrophysics Data System (ADS)

Ghosh, A.; Mendoza, M.; LI, B.; Karplus, M. S.; Nabelek, J.; Sapkota, S. N.; Adhikari, L. B.; Klemperer, S. L.; Velasco, A. A.

2017-12-01

Geometry of the Main Himalayan Thrust (MHT), that accommodates majority of the plate motion between Indian and Eurasian plate, is being debated for a long time. Different models have been proposed; some of them are significantly different from others. Obtaining a well constrained geometry of the MHT is challenging mainly because of the lack of high quality data, inherent low resolution and non-uniqueness of the models. We used a dense local seismic network - NAMASTE - to record and analyze a prolific aftershock sequence following the 2015 Mw 7.8 Gorkha earthquake, and determine geometry of the MHT constrained by precisely located well-constrained aftershocks. We detected and located more than 15,000 aftershocks of the Gorkha earthquake using Hypoinverse and then relatively relocated using HypoDD algorithm. We selected about 7,000 earthquakes that are particularly well constrained to analyze the geometry of the megathrust. They illuminate fault structure in this part of the Himalaya with unprecedented detail. The MHT shows two subhorizontal planes connected by a duplex structure. The duplex structure is characterized by multiple steeply dipping planes. In addition, we used four large-aperture continental-scale seismic arrays at teleseismic distances to backproject high-frequency seismic radiation. Moreover, we combined all arrays to significantly increase the resolution and detectability. We imaged rupture propagation of the mainshock showing complexity near the end of the rupture that might help arresting of the rupture to the east. Furthermore, we continuously scanned teleseismic data for two weeks starting from immediately after the mainshock to detect and locate aftershock activity only using the arrays. Spatial pattern of the aftershocks was similar to the existing global catalog using conventional seismic network and technique. However, we detected more than twice as many aftershocks using the array technique compared to the global catalog including many

Fault Parameters of the 1868 and 1877 earthquakes, inferred from historical records: Run-up measurements, Isoseismals and coseismic deformation

NASA Astrophysics Data System (ADS)

Riquelme, S.; Ruiz, S.; Yamazaki, Y.; Campos, J.

2012-04-01

The Mega-thrust zone of southern Peru and northern Chile is recognized as a tsunamigenic zone. In Southern Peru and Northern Chile, large earthquakes have not occurred in the last 130 years. The 1868 and 1877 were the last earthquakes with rupture larger than 400 km. The fault parameters and slip distribution of these earthquakes is not well understood, because only a few tide gauges recorded these events at far field distance. We studied simultaneously the near field effect, run-up, isoseismals, coseismic historical descriptions and far field tide gauges in the Pacific Ocean. We define several rupture scenerios which are numerically modeled using NEOWAVE program obtaining the tsunami propagation and coseismic deformation. New coupling models from are used to model scenarios. These results are compared with historical near field and far field observations, our preferred scenario fitted well these records and it agrees with the proposed isoseismals. For 1868 southern Peru earthquake our preferred scenario has a seismic rupture starting at the south part of 2001 Camaná Peru earthquake 16.8°S to 19.3°S through the Arica bending at 18°S, with a rupture of 350-400 km, maximum slip of 15 meters and seismic magnitude between M_w~8.7-8.9. For the 1877 earthquake our preferred scenario has a length of 400 kilometers from 23°S to 19.3°S, a maximum slip of 25 meters and seismic moderate magnitude of M_w~8.8. In both earthquakes the dip (10°-20°) is controlled by the geometry of subducting Nazca plate and larger slip distributions are located in the shallow part of the contact, from the trench to 30 km depth. Finally strong slip distribution in the shallow seismic contact for these historical mega-earthquakes could explain the apparent dual behavior between these mega-earthquakes Mw > 8.5 and moderate magnitude earthquakes Mw ~ 8.0 which apparently only have occurred in the depth zone of the contact i.e., the earthquakes of 1967 Mw 6.7 and 2007 Mw 7.7 in Tocopilla

Fiber-Optic Network Observations of Earthquake Wavefields

NASA Astrophysics Data System (ADS)

Lindsey, Nathaniel J.; Martin, Eileen R.; Dreger, Douglas S.; Freifeld, Barry; Cole, Stephen; James, Stephanie R.; Biondi, Biondo L.; Ajo-Franklin, Jonathan B.

2017-12-01

Our understanding of subsurface processes suffers from a profound observation bias: seismometers are sparse and clustered on continents. A new seismic recording approach, distributed acoustic sensing (DAS), transforms telecommunication fiber-optic cables into sensor arrays enabling meter-scale recording over tens of kilometers of linear fiber length. We analyze cataloged earthquake observations from three DAS arrays with different horizontal geometries to demonstrate some possibilities using this technology. In Fairbanks, Alaska, we find that stacking ground motion records along 20 m of fiber yield a waveform that shows a high degree of correlation in amplitude and phase with a colocated inertial seismometer record at 0.8-1.6 Hz. Using an L-shaped DAS array in Northern California, we record the nearly vertically incident arrival of an earthquake from The Geysers Geothermal Field and estimate its backazimuth and slowness via beamforming for different phases of the seismic wavefield. Lastly, we install a fiber in existing telecommunications conduits below Stanford University and show that little cable-to-soil coupling is required for teleseismic P and S phase arrival detection.

The ``exceptional'' earthquake of 3 January 1117 in the Verona area (northern Italy): A critical time review and detection of two lost earthquakes (lower Germany and Tuscany)

NASA Astrophysics Data System (ADS)

Guidoboni, Emanuela; Comastri, Alberto; Boschi, Enzo

2005-12-01

In the seismological literature the 3 January 1117 earthquake represents an interesting case study, both for the sheer size of the area in which that event is recorded by the monastic sources of the 12th century, and for the amount of damage mentioned. The 1117 event has been added to the earthquake catalogues of up to five European countries (Italy, France, Belgium, Switzerland, the Iberian peninsula), and it is the largest historical earthquake for northern Italy. We have analyzed the monastic time system in the 12th century and, by means of a comparative analysis of the sources, have correlated the two shocks mentioned (in the night and in the afternoon of 3 January) to territorial effects, seeking to make the overall picture reported for Europe more consistent. The connection between the linguistic indications and the localization of the effects has allowed us to shed light, with a reasonable degree of approximation, upon two previously little known earthquakes, probably generated by a sequence of events. A first earthquake in lower Germany (I0 (epicentral intensity) VII-VIII MCS (Mercalli, Cancani, Sieberg), M 6.4) preceded the far more violent one in northern Italy (Verona area) by about 12-13 hours. The second event is the one reported in the literature. We have put forward new parameters for this Veronese earthquake (I0 IX MCS, M 7.0). A third earthquake is independently recorded in the northwestern area of Tuscany (Imax VII-VIII MCS), but for the latter event the epicenter and magnitude cannot be evaluated.

Effect of baseline corrections on displacements and response spectra for several recordings of the 1999 Chi-Chi, Taiwan, earthquake

USGS Publications Warehouse

Boore, D.M.

2001-01-01

Displacements derived from many of the accelerogram recordings of the 1999 Chi-Chi, Taiwan, earthquake show drifts when only a simple baseline derived from the pre-event portion of the record is removed from the records. The appearance of the velocity and displacement records suggests that changes in the zero level of the acceleration are responsible for these drifts. The source of the shifts in zero level are unknown, but in at least one case it is almost certainly due to tilting of the ground. This article illustrates the effect on the ground velocity, ground displacement, and response spectra of several schemes for accounting for these baseline shifts. A wide range of final displacements can be obtained for various choices of baseline correction, and comparison with nearby GPS stations (none of which are colocated with the accelerograph stations) do not help in choosing the appropriate baseline correction. The results suggest that final displacements estimated from the records should be used with caution. The most important conclusion for earthquake engineering purposes, however, is that the response spectra for periods less than about 20 sec are usually unaffected by the baseline correction. Although limited to the analysis of only a small number of recordings, the results may have more general significance both for the many other recordings of this earthquake and for data that will be obtained in the future from similar high-quality accelerograph networks now being installed or soon to be installed in many parts of the world.

EM Earthquake Precursor Detection Associated with Fluid Injection for Hydraulic Fracturing and Tectonic Sources

NASA Astrophysics Data System (ADS)

Jones, Kenneth B., II

2015-04-01

Many attempts have been made to determine an earthquake forecasting method and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic wave model, various hypotheses were formed, but only two seemed to take shape with the most interesting one requiring a magnetometer of a unique design. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, results have had wide variability and problems still reside with what exactly is forecastable and the investigative direction of a true precursor. After a number of custom rock experiments, the two hypotheses were thoroughly tested to correlate the EM wave model. The first hypothesis involved sufficient and continuous electron movement either by surface or penetrative flow, and the second regarded a novel approach to radio wave generation. The second hypothesis resulted best with highly reproducible data, radio wave generation and detection, and worked numerous times with each laboratory test administered. In addition, internally introduced force on a small scale stressed a number of select rock types to emit radio waves well before catastrophic failure, and failure always went to completion. Comparatively, at a larger scale, highly detailed studies were procured to establish legitimate wave guides from potential hypocenters to epicenters and map the results, accordingly. Field testing in Southern California from 2006 to 2011 and outside the NE Texas town of Timpson in February, 2013 was conducted for detecting similar, laboratory generated, radio wave sources. At the Southern California field sites, signals were detected in numerous directions with varying amplitudes; therefore, a reactive approach was investigated in hopes of detecting possible aftershocks from large, tectonically related M5.0+ earthquakes. At the Timpson

A 667 year record of coseismic and interseismic Coulomb stress changes in central Italy reveals the role of fault interaction in controlling irregular earthquake recurrence intervals

NASA Astrophysics Data System (ADS)

Wedmore, L. N. J.; Faure Walker, J. P.; Roberts, G. P.; Sammonds, P. R.; McCaffrey, K. J. W.; Cowie, P. A.

2017-07-01

Current studies of fault interaction lack sufficiently long earthquake records and measurements of fault slip rates over multiple seismic cycles to fully investigate the effects of interseismic loading and coseismic stress changes on the surrounding fault network. We model elastic interactions between 97 faults from 30 earthquakes since 1349 A.D. in central Italy to investigate the relative importance of co-seismic stress changes versus interseismic stress accumulation for earthquake occurrence and fault interaction. This region has an exceptionally long, 667 year record of historical earthquakes and detailed constraints on the locations and slip rates of its active normal faults. Of 21 earthquakes since 1654, 20 events occurred on faults where combined coseismic and interseismic loading stresses were positive even though 20% of all faults are in "stress shadows" at any one time. Furthermore, the Coulomb stress on the faults that experience earthquakes is statistically different from a random sequence of earthquakes in the region. We show how coseismic Coulomb stress changes can alter earthquake interevent times by 103 years, and fault length controls the intensity of this effect. Static Coulomb stress changes cause greater interevent perturbations on shorter faults in areas characterized by lower strain (or slip) rates. The exceptional duration and number of earthquakes we model enable us to demonstrate the importance of combining long earthquake records with detailed knowledge of fault geometries, slip rates, and kinematics to understand the impact of stress changes in complex networks of active faults.

Stochastic output error vibration-based damage detection and assessment in structures under earthquake excitation

NASA Astrophysics Data System (ADS)

Sakellariou, J. S.; Fassois, S. D.

2006-11-01

A stochastic output error (OE) vibration-based methodology for damage detection and assessment (localization and quantification) in structures under earthquake excitation is introduced. The methodology is intended for assessing the state of a structure following potential damage occurrence by exploiting vibration signal measurements produced by low-level earthquake excitations. It is based upon (a) stochastic OE model identification, (b) statistical hypothesis testing procedures for damage detection, and (c) a geometric method (GM) for damage assessment. The methodology's advantages include the effective use of the non-stationary and limited duration earthquake excitation, the handling of stochastic uncertainties, the tackling of the damage localization and quantification subproblems, the use of "small" size, simple and partial (in both the spatial and frequency bandwidth senses) identified OE-type models, and the use of a minimal number of measured vibration signals. Its feasibility and effectiveness are assessed via Monte Carlo experiments employing a simple simulation model of a 6 storey building. It is demonstrated that damage levels of 5% and 20% reduction in a storey's stiffness characteristics may be properly detected and assessed using noise-corrupted vibration signals.

Hilbert-Huang transform analysis of dynamic and earthquake motion recordings

USGS Publications Warehouse

Zhang, R.R.; Ma, S.; Safak, E.; Hartzell, S.

2003-01-01

This study examines the rationale of Hilbert-Huang transform (HHT) for analyzing dynamic and earthquake motion recordings in studies of seismology and engineering. In particular, this paper first provides the fundamentals of the HHT method, which consist of the empirical mode decomposition (EMD) and the Hilbert spectral analysis. It then uses the HHT to analyze recordings of hypothetical and real wave motion, the results of which are compared with the results obtained by the Fourier data processing technique. The analysis of the two recordings indicates that the HHT method is able to extract some motion characteristics useful in studies of seismology and engineering, which might not be exposed effectively and efficiently by Fourier data processing technique. Specifically, the study indicates that the decomposed components in EMD of HHT, namely, the intrinsic mode function (IMF) components, contain observable, physical information inherent to the original data. It also shows that the grouped IMF components, namely, the EMD-based low- and high-frequency components, can faithfully capture low-frequency pulse-like as well as high-frequency wave signals. Finally, the study illustrates that the HHT-based Hilbert spectra are able to reveal the temporal-frequency energy distribution for motion recordings precisely and clearly.

Consistency of GPS and strong-motion records: case study of the Mw9.0 Tohoku-Oki 2011 earthquake

NASA Astrophysics Data System (ADS)

Psimoulis, Panos; Houlié, Nicolas; Michel, Clotaire; Meindl, Michael; Rothacher, Markus

2014-05-01

High-rate GPS data are today commonly used to supplement seismic data for the Earth surface motions focusing on earthquake characterisation and rupture modelling. Processing of GPS records using Precise Point Positioning (PPP) can provide real-time information of seismic wave propagation, tsunami early-warning and seismic rupture. Most studies have shown differences between the GPS and seismic systems at very long periods (e.g. >100sec) and static displacements. The aim of this study is the assessment of the consistency of GPS and strong-motion records by comparing their respective displacement waveforms for several frequency bands. For this purpose, the records of the GPS (GEONET) and the strong-motion (KiK-net and K-NET) networks corresponding to the Mw9.0 Tohoku 2011 earthquake were analysed. The comparison of the displacement waveforms of collocated (distance<100m) GPS and strong-motion sites show that the consistency between the two datasets depends on the frequency of the excitation. Differences are mainly due to the GPS noise at relatively short-periods (<3-4 s) and the saturation of the strong-motion sensors for relatively long-periods (40-80 s). Furthermore the agreement between the GPS and strong-motion records also depends on the direction of the excitation signal and the distance from the epicentre. In conclusion, velocities and displacements recovered from GPS and strong-motion records are consistent for long-periods (3-100 s), proving that GPS networks can contribute to the real-time estimation of the long-period ground motion map of an earthquake.

The September 19, 1985 Michoacan Earthquake: Aftershock acceleration data recorded by a temporary installation of strong motion instruments

NASA Astrophysics Data System (ADS)

Munguía, Luis; Simila, Gerry W.; McNally, Karen C.; Thompson, Howard

1986-06-01

We describe acceleration signals recorded for nine aftershocks of the September 19, 1985 Michoacan earthquake. To obtain this data set, three A-700 Teledyne-Geotech digital strong-motion instruments were operated temporarily at two sites on the José María Morelos (La Villita) Dam, and at a site located at about 12 km to the west of the town of Zihuatanejo. Peak horizontal accelerations of 0.005 g to 0.031 g were recorded at epicentral distances between 10 and 75 km, for earthquakes with magnitude (mb) between 4.5 and 5.3. It was observed that the peak accelerations recorded at a site on the embankment of the dam (near the crest ) are approximately three times those recorded on the abutment bedrock portion of the dam. Although these sites were spatially separated by no more than 300 m, differences among their records are also significant. Waveforms recorded at the embankment site look more complex than those from the abutment site. This fact, as well as the higher peak accelerations on the embankment, provides evidence of a strong influence of the structure of the dam on the ground motion at the embankment site.

Earthquake recordings from the 2002 Seattle Seismic Hazard Investigation of Puget Sound (SHIPS), Washington State

USGS Publications Warehouse

Pratt, Thomas L.; Meagher, Karen L.; Brocher, Thomas M.; Yelin, Thomas; Norris, Robert; Hultgrien, Lynn; Barnett, Elizabeth; Weaver, Craig S.

2003-01-01

This report describes seismic data obtained during the fourth Seismic Hazard Investigation of Puget Sound (SHIPS) experiment, termed Seattle SHIPS . The experiment was designed to study the influence of the Seattle sedimentary basin on ground shaking during earthquakes. To accomplish this, we deployed seismometers over the basin to record local earthquakes, quarry blasts, and teleseisms during the period of January 26 to May 27, 2002. We plan to analyze the recordings to compute spectral amplitudes at each site, to determine the variability of ground motions over the basin. During the Seattle SHIPS experiment, seismometers were deployed at 87 sites in a 110-km-long east-west line, three north-south lines, and a grid throughout the Seattle urban area (Figure 1). At each of these sites, an L-22, 2-Hz velocity transducer was installed and connected to a REF TEK Digital Acquisition System (DAS), both provided by the Program for Array Seismic Studies of the Continental Lithosphere (PASSCAL) of the Incorporated Research Institutes for Seismology (IRIS). The instruments were installed on January 26 and 27, and were retrieved gradually between April 18 and May 27. All instruments continuously sampled all three components of motion (velocity) at a sample rate of 50 samples/sec. To ensure accurate computations of amplitude, we calibrated the geophones in situ to obtain the instrument responses. In this report, we discuss the acquisition of these data, we describe the processing and merging of these data into 1-hour long traces and into windowed events, we discuss the geophone calibration process and its results, and we display some of the earthquake recordings.

Microearthquake detection at 2012 M4.9 Qiaojia earthquake source area , the north of the Xiaojiang Fault in Yunnan, China

NASA Astrophysics Data System (ADS)

Li, Y.; Yang, H.; Zhou, S.; Yan, C.

2016-12-01

We perform a comprehensive analysis in Yunnan area based on continuous seismic data of 38 stations of Qiaojia Network in Xiaojiang Fault from 2012.3 to 2015.2. We use an effective method: Match and Locate (M&L, Zhang&Wen, 2015) to detect and locate microearthquakes to conduct our research. We first study dynamic triggering around the Xiaojiang Fault in Yunnan. The triggered earthquakes are identified as two impulsive seismic arrivals in 2Hz-highpass-filtered velocity seismograms during the passage of surface waves of large teleseismic earthquakes. We only find two earthquakes that may have triggered regional earthquakes through inspecting their spectrograms: Mexico Mw7.4 earthquake in 03/20/2012 and El Salvador Mw7.3 earthquake in 10/14/2014. To confirm the two earthquakes are triggered instead of coincidence, we use M&L to search if there are any repeating earthquakes. The result of the coefficients shows that it is a coincidence during the surface waves of El Salvador earthquake and whether 2012 Mexico have triggered earthquake is under discussion. We then visually inspect the 2-8Hz-bandpass-filterd velocity envelopes of these years to search for non-volcanic tremor. We haven't detected any signals similar to non-volcanic tremors yet. In the following months, we are going to study the 2012 M4.9 Qiaojia earthquake. It occurred only 30km west of the epicenter of the 2014 M6.5 Ludian earthquake. We use Match and Locate (M&L) technique to detect and relocate microearthquakes that occurred 2 days before and 3 days after the mainshock. Through this, we could obtain several times more events than listed in the catalogs provided by NEIC and reduce the magnitude of completeness Mc. We will also detect microearthquakes along Xiaojiang Fault using template earthquakes listed in the catalogs to learn more about fault shape and other properties of Xiaojiang Fault. Analyzing seismicity near Xiaojiang Fault systematically may cast insight on our understanding of the features of

Repeated Earthquakes in the Vrancea Subcrustal Source and Source Scaling

NASA Astrophysics Data System (ADS)

Popescu, Emilia; Otilia Placinta, Anica; Borleasnu, Felix; Radulian, Mircea

2017-12-01

The Vrancea seismic nest, located at the South-Eastern Carpathians Arc bend, in Romania, is a well-confined cluster of seismicity at intermediate depth (60 - 180 km). During the last 100 years four major shocks were recorded in the lithosphere body descending almost vertically beneath the Vrancea region: 10 November 1940 (Mw 7.7, depth 150 km), 4 March 1977 (Mw 7.4, depth 94 km), 30 August 1986 (Mw 7.1, depth 131 km) and a double shock on 30 and 31 May 1990 (Mw 6.9, depth 91 km and Mw 6.4, depth 87 km, respectively). The probability of repeated earthquakes in the Vrancea seismogenic volume is relatively large taking into account the high density of foci. The purpose of the present paper is to investigate source parameters and clustering properties for the repetitive earthquakes (located close each other) recorded in the Vrancea seismogenic subcrustal region. To this aim, we selected a set of earthquakes as templates for different co-located groups of events covering the entire depth range of active seismicity. For the identified clusters of repetitive earthquakes, we applied spectral ratios technique and empirical Green’s function deconvolution, in order to constrain as much as possible source parameters. Seismicity patterns of repeated earthquakes in space, time and size are investigated in order to detect potential interconnections with larger events. Specific scaling properties are analyzed as well. The present analysis represents a first attempt to provide a strategy for detecting and monitoring possible interconnections between different nodes of seismic activity and their role in modelling tectonic processes responsible for generating the major earthquakes in the Vrancea subcrustal seismogenic source.

Stress Regime in the Nepalese Himalaya from Recent Earthquakes.

NASA Astrophysics Data System (ADS)

Pant, M.; Karplus, M. S.; Velasco, A. A.; Nabelek, J.; Kuna, V. M.; Ghosh, A.; Mendoza, M.; Adhikari, L. B.; Sapkota, S. N.; Klemperer, S. L.; Patlan, E.

2017-12-01

The two recent earthquakes, April 25, 2015 Mw 7.8 (Gorkha earthquake) and May 12, 2015 Mw 7.2, at the Indo-Eurasian plate margin killed thousands of people and caused billion dollars of property loss. In response to these events, we deployed a dense array of seismometers to record the aftershocks along Gorkha earthquake rupture area. Our network NAMASTE (Nepal Array Measuring Aftershock Seismicity Trailing Earthquake) included 45 different seismic stations (16 short period, 25 broadband, and 4 strong motion sensors) covering a large area from north-central Nepal to south of the Main Frontal Thrust at a spacing of 20 km. The instruments recorded aftershocks from June 2015 to May 2016. We used time domain short term average (STA) and long term average (LTA) algorithms (1/10s and 4/40s) respectively to detect the arrivals and then developed an earthquake catalog containing 9300 aftershocks. We are manually picking the P-wave first motion arrival polarity to develop a catalog of focal mechanisms for the larger magnitude (>M3.0) events with adequate (>10) arrivals. We hope to characterize the seismicity and stress mechanisms of the complex fault geometries in the Nepalese Himalaya and to address the geophysical processes controlling seismic cycles in the Indo-Eurasian plate margin.

Testing continuous earthquake detection and location in Alentejo (South Portugal) by waveform coherency analysis

NASA Astrophysics Data System (ADS)

Matos, Catarina; Grigoli, Francesco; Cesca, Simone; Custódio, Susana

2015-04-01

In the last decade a permanent seismic network of 30 broadband stations, complemented by dense temporary deployments, covered Portugal. This extraordinary network coverage enables now the computation of a high-resolution image of the seismicity of Portugal, which in turn will shed light on the seismotectonics of Portugal. The large data volumes available cannot be analyzed by traditional time-consuming manual location procedures. In this presentation we show first results on the automatic detection and location of earthquakes occurred in a selected region in the south of Portugal Our main goal is to implement an automatic earthquake detection and location routine in order to have a tool to quickly process large data sets, while at the same time detecting low magnitude earthquakes (i.e., lowering the detection threshold). We present a modified version of the automatic seismic event location by waveform coherency analysis developed by Grigoli et al. (2013, 2014), designed to perform earthquake detections and locations in continuous data. The event detection is performed by continuously computing the short-term-average/long-term-average of two different characteristic functions (CFs). For the P phases we used a CF based on the vertical energy trace, while for S phases we used a CF based on the maximum eigenvalue of the instantaneous covariance matrix (Vidale 1991). Seismic event detection and location is obtained by performing waveform coherence analysis scanning different hypocentral coordinates. We apply this technique to earthquakes in the Alentejo region (South Portugal), taking advantage from a small aperture seismic network installed in the south of Portugal for two years (2010 - 2011) during the DOCTAR experiment. In addition to the good network coverage, the Alentejo region was chosen for its simple tectonic setting and also because the relationship between seismicity, tectonics and local lithospheric structure is intriguing and still poorly understood. Inside

Excel, Earthquakes, and Moneyball: exploring Cascadia earthquake probabilities using spreadsheets and baseball analogies

NASA Astrophysics Data System (ADS)

Campbell, M. R.; Salditch, L.; Brooks, E. M.; Stein, S.; Spencer, B. D.

2017-12-01

Much recent media attention focuses on Cascadia's earthquake hazard. A widely cited magazine article starts "An earthquake will destroy a sizable portion of the coastal Northwest. The question is when." Stories include statements like "a massive earthquake is overdue", "in the next 50 years, there is a 1-in-10 chance a "really big one" will erupt," or "the odds of the big Cascadia earthquake happening in the next fifty years are roughly one in three." These lead students to ask where the quoted probabilities come from and what they mean. These probability estimates involve two primary choices: what data are used to describe when past earthquakes happened and what models are used to forecast when future earthquakes will happen. The data come from a 10,000-year record of large paleoearthquakes compiled from subsidence data on land and turbidites, offshore deposits recording submarine slope failure. Earthquakes seem to have happened in clusters of four or five events, separated by gaps. Earthquakes within a cluster occur more frequently and regularly than in the full record. Hence the next earthquake is more likely if we assume that we are in the recent cluster that started about 1700 years ago, than if we assume the cluster is over. Students can explore how changing assumptions drastically changes probability estimates using easy-to-write and display spreadsheets, like those shown below. Insight can also come from baseball analogies. The cluster issue is like deciding whether to assume that a hitter's performance in the next game is better described by his lifetime record, or by the past few games, since he may be hitting unusually well or in a slump. The other big choice is whether to assume that the probability of an earthquake is constant with time, or is small immediately after one occurs and then grows with time. This is like whether to assume that a player's performance is the same from year to year, or changes over their career. Thus saying "the chance of

A study of earthquake-induced building detection by object oriented classification approach

NASA Astrophysics Data System (ADS)

Sabuncu, Asli; Damla Uca Avci, Zehra; Sunar, Filiz

2017-04-01

Among the natural hazards, earthquakes are the most destructive disasters and cause huge loss of lives, heavily infrastructure damages and great financial losses every year all around the world. According to the statistics about the earthquakes, more than a million earthquakes occur which is equal to two earthquakes per minute in the world. Natural disasters have brought more than 780.000 deaths approximately % 60 of all mortality is due to the earthquakes after 2001. A great earthquake took place at 38.75 N 43.36 E in the eastern part of Turkey in Van Province on On October 23th, 2011. 604 people died and about 4000 buildings seriously damaged and collapsed after this earthquake. In recent years, the use of object oriented classification approach based on different object features, such as spectral, textural, shape and spatial information, has gained importance and became widespread for the classification of high-resolution satellite images and orthophotos. The motivation of this study is to detect the collapsed buildings and debris areas after the earthquake by using very high-resolution satellite images and orthophotos with the object oriented classification and also see how well remote sensing technology was carried out in determining the collapsed buildings. In this study, two different land surfaces were selected as homogenous and heterogeneous case study areas. In the first step of application, multi-resolution segmentation was applied and optimum parameters were selected to obtain the objects in each area after testing different color/shape and compactness/smoothness values. In the next step, two different classification approaches, namely "supervised" and "unsupervised" approaches were applied and their classification performances were compared. Object-based Image Analysis (OBIA) was performed using e-Cognition software.

WGCEP Historical California Earthquake Catalog

USGS Publications Warehouse

Felzer, Karen R.; Cao, Tianqing

2008-01-01

This appendix provides an earthquake catalog for California and the surrounding area. Our goal is to provide a listing for all known M > 5.5 earthquakes that occurred from 1850-1932 and all known M > 4.0 earthquakes that occurred from 1932-2006 within the region of 31.0 to 43.0 degrees North and -126.0 to -114.0 degrees West. Some pre-1932 earthquakes 4 5, before the Northern California network was online. Some earthquakes from 1900-1932, and particularly from 1910-1932 are also based on instrumental readings, but the quality of the instrumental record and the resulting analysis are much less precise than for later listings. A partial exception is for some of the largest earthquakes, such as the San Francisco earthquake of April 18, 1906, for which global teleseismic records (Wald et al. 1993) and geodetic measurements (Thatcher et al. 1906) have been used to help determine magnitudes.

Site Effects in the City of Port au Prince (Haiti) Inferred From 2010 Earthquake Aftershocks Recordings.

NASA Astrophysics Data System (ADS)

ST Fleur, S.; Courboulex, F.; Bertrand, E.; Deschamps, A.; Mercier De Lepinay, B. F.; Boisson, D.; Prepetit, C.; Hough, S. E.

2014-12-01

The Haitian earthquake of 12 January 2010 (Mw=7) caused an unprecedented disaster in Port-au-Prince as well as in smaller cities close to the epicenter. The extent of damage appears to be initially attributed to the proximity of the earthquake in Port-au-Prince, the extreme vulnerability of many structures, and a high population density. However, the damage distribution for this earthquake suggests a general correlation of damage with small-scale topographical features and local geological structure. The main objective of this work is to investigate site effects in the city of Port-au-Prince. It is also to better define the response of different sites to earthquakes and establish transfer functions between each site and a particular site defined as a reference site. Specific soil columns is determined in the vicinity of each station in order to carry out 1D simulations of soil response at these sites. About 90 earthquakes (2recorded between March 2010 and February 2013 on a local network composed of nine accelerometers installed by USGS, three broad-band velocimeters installed by NRCAN and two velocimeters of the French "Sismo at school" network. We located 39 of these events using the permanent network and 43 were located by Douilly et al. (2013) using a temporary network. The ground motion recordings at these stations were then analyzed in order to study the topographic and lithologic amplification effects observed on these sites. To quantify site effects under each station, we have used classical spectral ratio methods. In a first step, the HVSR earthquake method (Horizontal over Vertical ratio) was used to choose a reference station in Port au Prince that should be ideally a station without any site effects. We selected HCEA station as reference station. In a second step, we estimated the transfer function at each station by the SSR (Standard Spectral Ratio). Finally, these transfer functions estimated by the spectral ratios technique were compared

Historic and Instrumental Records of Repeating Seismicity in the Gyeongju Area, Southeastern Korea

NASA Astrophysics Data System (ADS)

HAN, M.; Kim, K. H.; Kang, S. Y.; Son, M.; Park, J. H.; LI, Z.

2015-12-01

Gyeongju area located in southeastern Korea has experienced repeated seismicity. Historic records during the last 2000 years in the area indicate the earthquake with magnitude 6.7 caused damages of human life and property in 779. During the period of modern instrumental seismic records, the area also experienced numerous small- and moderate-magnitude earthquakes. For example, an earthquake with magnitude 4.3 occurring in 1997 provided a chance for nationwide evaluations of earthquake safety and the renewal of earthquake monitoring system in Korea. The area is still experiencing small earthquakes including magnitude 3.5 in September 2014. We applied waveform correlation detector to continuously recorded seismic data from July 2014 to December 2014 to identify any repeating earthquakes. Detected waveforms are carefully inspected and more than 230 potential events are identified. Eighty three earthquakes among them have been selected for precise determination of earthquake hypocenters. Focal mechanism solutions for representative events were also determined. We further compared the results with those obtained using earthquakes prior to 2013. It has been confirmed the earthquakes in the area are clustered in space. Similar waveforms, earthquake locations, and focal mechanism solutions identified in the study indicates an active faults in the area. Since the area hosts many critical infra-structures, micro-seismicity in the area requires extensive study to address earthquake hazard issues.

Unusual downhole and surface free-field records near the Carquinez Strait bridges during the 24 August 2014 Mw6.0 South Napa, California earthquake

USGS Publications Warehouse

Çelebi, Mehmet; Ghahari, S. Farid; Taciroglu, Ertugrul

2015-01-01

This paper reports the results of Part A of a study of the recorded strong-motion accelerations at the well-instrumented network of the two side-by-side parallel bridges over the Carquinez Strait during the 24 August 2014 (Mw6.0 ) South Napa, Calif. earthquake that occurred at 03:20:44 PDT with epicentral coordinates 38.22N, 122.31W. (http://earthquake.usgs.gov/earthquakes/eqarchives/poster/2014/20140824.php, last accessed on October 17, 2014). Both bridges and two boreholes were instrumented by the California Strong motion Instrumentation Program (CSMIP) of California Geological Survey (CGS) (Shakal et al., 2014). A comprehensive comparison of several ground motion prediction equations as they relate to recorded ground motions of the earthquake is provided by Baltay and Boatright (2015).

Earthquake Facts

MedlinePlus

... recordings of large earthquakes, scientists built large spring-pendulum seismometers in an attempt to record the long- ... are moving away from one another. The first “pendulum seismoscope” to measure the shaking of the ground ...

A slow earthquake sequence on the San Andreas fault

USGS Publications Warehouse

Linde, A.T.; Gladwin, M.T.; Johnston, M.J.S.; Gwyther, R.L.; Bilham, R.G.

1996-01-01

EARTHQUAKES typically release stored strain energy on timescales of the order of seconds, limited by the velocity of sound in rock. Over the past 20 years, observations and laboratory experiments have indicated that capture can also occur more slowly, with durations up to hours. Such events may be important in earthquake nucleation and in accounting for the excess of plate convergence over seismic slip in subduction zones. The detection of events with larger timescales requires near-field deformation measurements. In December 1992, two borehole strainmeters close to the San Andreas fault in California recorded a slow strain event of about a week in duration, and we show here that the strain changes were produced by a slow earthquake sequence (equivalent magnitude 4.8) with complexity similar to that of regular earthquakes. The largest earthquakes associated with these slow events were small (local magnitude 3.7) and contributed negligible strain release. The importance of slow earthquakes in the seismogenic process remains an open question, but these observations extend the observed timescale for slow events by two orders of magnitude.

Prospective testing of Coulomb short-term earthquake forecasts

NASA Astrophysics Data System (ADS)

Jackson, D. D.; Kagan, Y. Y.; Schorlemmer, D.; Zechar, J. D.; Wang, Q.; Wong, K.

2009-12-01

Earthquake induced Coulomb stresses, whether static or dynamic, suddenly change the probability of future earthquakes. Models to estimate stress and the resulting seismicity changes could help to illuminate earthquake physics and guide appropriate precautionary response. But do these models have improved forecasting power compared to empirical statistical models? The best answer lies in prospective testing in which a fully specified model, with no subsequent parameter adjustments, is evaluated against future earthquakes. The Center of Study of Earthquake Predictability (CSEP) facilitates such prospective testing of earthquake forecasts, including several short term forecasts. Formulating Coulomb stress models for formal testing involves several practical problems, mostly shared with other short-term models. First, earthquake probabilities must be calculated after each “perpetrator” earthquake but before the triggered earthquakes, or “victims”. The time interval between a perpetrator and its victims may be very short, as characterized by the Omori law for aftershocks. CSEP evaluates short term models daily, and allows daily updates of the models. However, lots can happen in a day. An alternative is to test and update models on the occurrence of each earthquake over a certain magnitude. To make such updates rapidly enough and to qualify as prospective, earthquake focal mechanisms, slip distributions, stress patterns, and earthquake probabilities would have to be made by computer without human intervention. This scheme would be more appropriate for evaluating scientific ideas, but it may be less useful for practical applications than daily updates. Second, triggered earthquakes are imperfectly recorded following larger events because their seismic waves are buried in the coda of the earlier event. To solve this problem, testing methods need to allow for “censoring” of early aftershock data, and a quantitative model for detection threshold as a function of

a Collaborative Cyberinfrastructure for Earthquake Seismology

NASA Astrophysics Data System (ADS)

Bossu, R.; Roussel, F.; Mazet-Roux, G.; Lefebvre, S.; Steed, R.

2013-12-01

One of the challenges in real time seismology is the prediction of earthquake's impact. It is particularly true for moderate earthquake (around magnitude 6) located close to urbanised areas, where the slightest uncertainty in event location, depth, magnitude estimates, and/or misevaluation of propagation characteristics, site effects and buildings vulnerability can dramatically change impact scenario. The Euro-Med Seismological Centre (EMSC) has developed a cyberinfrastructure to collect observations from eyewitnesses in order to provide in-situ constraints on actual damages. This cyberinfrastructure takes benefit of the natural convergence of earthquake's eyewitnesses on EMSC website (www.emsc-csem.org), the second global earthquake information website within tens of seconds of the occurrence of a felt event. It includes classical crowdsourcing tools such as online questionnaires available in 39 languages, and tools to collect geolocated pics. It also comprises information derived from the real time analysis of the traffic on EMSC website, a method named flashsourcing; In case of a felt earthquake, eyewitnesses reach EMSC website within tens of seconds to find out the cause of the shaking they have just been through. By analysing their geographical origin through their IP address, we automatically detect felt earthquakes and in some cases map the damaged areas through the loss of Internet visitors. We recently implemented a Quake Catcher Network (QCN) server in collaboration with Stanford University and the USGS, to collect ground motion records performed by volunteers and are also involved in a project to detect earthquakes from ground motions sensors from smartphones. Strategies have been developed for several social media (Facebook, Twitter...) not only to distribute earthquake information, but also to engage with the Citizens and optimise data collection. A smartphone application is currently under development. We will present an overview of this

Source depth dependence of micro-tsunamis recorded with ocean-bottom pressure gauges: The January 28, 2000 Mw 6.8 earthquake off Nemuro Peninsula, Japan

USGS Publications Warehouse

Hirata, K.; Takahashi, H.; Geist, E.; Satake, K.; Tanioka, Y.; Sugioka, H.; Mikada, H.

2003-01-01

Micro-tsunami waves with a maximum amplitude of 4-6 mm were detected with the ocean-bottom pressure gauges on a cabled deep seafloor observatory south of Hokkaido, Japan, following the January 28, 2000 earthquake (Mw 6.8) in the southern Kuril subduction zone. We model the observed micro-tsunami and estimate the focal depth and other source parameters such as fault length and amount of slip using grid searching with the least-squares method. The source depth and stress drop for the January 2000 earthquake are estimated to be 50 km and 7 MPa, respectively, with possible ranges of 45-55 km and 4-13 MPa. Focal depth of typical inter-plate earthquakes in this region ranges from 10 to 20 km and stress drop of inter-plate earthquakes generally is around 3 MPa. The source depth and stress drop estimates suggest that the earthquake was an intra-slab event in the subducting Pacific plate, rather than an inter-plate event. In addition, for a prescribed fault width of 30 km, the fault length is estimated to be 15 km, with possible ranges of 10-20 km, which is the same as the previously determined aftershock distribution. The corresponding estimate for seismic moment is 2.7x1019 Nm with possible ranges of 2.3x1019-3.2x1019Nm. Standard tide gauges along the nearby coast did not record any tsunami signal. High-precision ocean-bottom pressure measurements offshore thus make it possible to determine fault parameters of moderate-sized earthquakes in subduction zones using open-ocean tsunami waveforms. Published by Elsevier Science B. V.

Real-Time Detection of Rupture Development: Earthquake Early Warning Using P Waves From Growing Ruptures

NASA Astrophysics Data System (ADS)

Kodera, Yuki

2018-01-01

Large earthquakes with long rupture durations emit P wave energy throughout the rupture period. Incorporating late-onset P waves into earthquake early warning (EEW) algorithms could contribute to robust predictions of strong ground motion. Here I describe a technique to detect in real time P waves from growing ruptures to improve the timeliness of an EEW algorithm based on seismic wavefield estimation. The proposed P wave detector, which employs a simple polarization analysis, successfully detected P waves from strong motion generation areas of the 2011 Mw 9.0 Tohoku-oki earthquake rupture. An analysis using 23 large (M ≥ 7) events from Japan confirmed that seismic intensity predictions based on the P wave detector significantly increased lead times without appreciably decreasing the prediction accuracy. P waves from growing ruptures, being one of the fastest carriers of information on ongoing rupture development, have the potential to improve the performance of EEW systems.

Automatic Earthquake Detection and Location by Waveform coherency in Alentejo (South Portugal) Using CatchPy

NASA Astrophysics Data System (ADS)

Custodio, S.; Matos, C.; Grigoli, F.; Cesca, S.; Heimann, S.; Rio, I.

2015-12-01

Seismic data processing is currently undergoing a step change, benefitting from high-volume datasets and advanced computer power. In the last decade, a permanent seismic network of 30 broadband stations, complemented by dense temporary deployments, covered mainland Portugal. This outstanding regional coverage currently enables the computation of a high-resolution image of the seismicity of Portugal, which contributes to fitting together the pieces of the regional seismo-tectonic puzzle. Although traditional manual inspections are valuable to refine automatic results they are impracticable with the big data volumes now available. When conducted alone they are also less objective since the criteria is defined by the analyst. In this work we present CatchPy, a scanning algorithm to detect earthquakes in continuous datasets. Our main goal is to implement an automatic earthquake detection and location routine in order to have a tool to quickly process large data sets, while at the same time detecting low magnitude earthquakes (i.e. lowering the detection threshold). CatchPY is designed to produce an event database that could be easily located using existing location codes (e.g.: Grigoli et al. 2013, 2014). We use CatchPy to perform automatic detection and location of earthquakes that occurred in Alentejo region (South Portugal), taking advantage of a dense seismic network deployed in the region for two years during the DOCTAR experiment. Results show that our automatic procedure is particularly suitable for small aperture networks. The event detection is performed by continuously computing the short-term-average/long-term-average of two different characteristic functions (CFs). For the P phases we used a CF based on the vertical energy trace while for S phases we used a CF based on the maximum eigenvalue of the instantaneous covariance matrix (Vidale 1991). Seismic event location is performed by waveform coherence analysis, scanning different hypocentral coordinates

Revelations from a single strong-motion record retreived during the 27 June 1998 Adana (Turkey) earthquake

USGS Publications Warehouse

Celebi, M.

2000-01-01

During the 27 June 1998 Adana (Turkey) earthquake, only one strong-motion record was retrieved in the region where the most damage occurred. This single record from the station in Ceyhan, approximately 15 km from the epicenter of that earthquake, exhibits characteristics that are related to the dominant frequencies of the ground and structures. The purpose of this paper is to explain the causes of the damage as inferred from both field observations and the characteristics of a single strong-motion record retrieved from the immediate epicentral area. In the town of Ceyhan there was considerable but selective damage to a significant number of mid-rise (7-12 stories high) buildings. The strong-motion record exhibits dominant frequencies that are typically similar for the mid-rise building structures. This is further supported by spectral ratios derived using Nakamura's method [QR of RTRI, 30 (1989) 25] that facilitates computation of a spectral ratio from a single tri-axial record as the ratio of amplitude spectrum of horizontal component to that of the vertical component [R = H(f)/V(f)]. The correlation between the damage and the characteristics exhibited from the single strong-motion record is remarkable. Although deficient construction practices played a significant role in the extent of damage to the mid-rise buildings, it is clear that site resonance also contributed to the detrimental fate of most of the mid-rise buildings. Therefore, even a single record can be useful to explain the effect of site resonance on building response and performance. Such information can be very useful for developing zonation criteria in similar alluvial valleys. Published by Elsevier Science Ltd.

National Earthquake Information Center Seismic Event Detections on Multiple Scales

NASA Astrophysics Data System (ADS)

Patton, J.; Yeck, W. L.; Benz, H.; Earle, P. S.; Soto-Cordero, L.; Johnson, C. E.

2017-12-01

The U.S. Geological Survey National Earthquake Information Center (NEIC) monitors seismicity on local, regional, and global scales using automatic picks from more than 2,000 near-real time seismic stations. This presents unique challenges in automated event detection due to the high variability in data quality, network geometries and density, and distance-dependent variability in observed seismic signals. To lower the overall detection threshold while minimizing false detection rates, NEIC has begun to test the incorporation of new detection and picking algorithms, including multiband (Lomax et al., 2012) and kurtosis (Baillard et al., 2014) pickers, and a new bayesian associator (Glass 3.0). The Glass 3.0 associator allows for simultaneous processing of variably scaled detection grids, each with a unique set of nucleation criteria (e.g., nucleation threshold, minimum associated picks, nucleation phases) to meet specific monitoring goals. We test the efficacy of these new tools on event detection in networks of various scales and geometries, compare our results with previous catalogs, and discuss lessons learned. For example, we find that on local and regional scales, rapid nucleation of small events may require event nucleation with both P and higher-amplitude secondary phases (e.g., S or Lg). We provide examples of the implementation of a scale-independent associator for an induced seismicity sequence (local-scale), a large aftershock sequence (regional-scale), and for monitoring global seismicity. Baillard, C., Crawford, W. C., Ballu, V., Hibert, C., & Mangeney, A. (2014). An automatic kurtosis-based P-and S-phase picker designed for local seismic networks. Bulletin of the Seismological Society of America, 104(1), 394-409. Lomax, A., Satriano, C., & Vassallo, M. (2012). Automatic picker developments and optimization: FilterPicker - a robust, broadband picker for real-time seismic monitoring and earthquake early-warning, Seism. Res. Lett. , 83, 531-540, doi: 10

Earthquake triggering in southeast Africa following the 2012 Indian Ocean earthquake

NASA Astrophysics Data System (ADS)

Neves, Miguel; Custódio, Susana; Peng, Zhigang; Ayorinde, Adebayo

2018-02-01

In this paper we present evidence of earthquake dynamic triggering in southeast Africa. We analysed seismic waveforms recorded at 53 broad-band and short-period stations in order to identify possible increases in the rate of microearthquakes and tremor due to the passage of teleseismic waves generated by the Mw8.6 2012 Indian Ocean earthquake. We found evidence of triggered local earthquakes and no evidence of triggered tremor in the region. We assessed the statistical significance of the increase in the number of local earthquakes using β-statistics. Statistically significant dynamic triggering of local earthquakes was observed at 7 out of the 53 analysed stations. Two of these stations are located in the northeast coast of Madagascar and the other five stations are located in the Kaapvaal Craton, southern Africa. We found no evidence of dynamically triggered seismic activity in stations located near the structures of the East African Rift System. Hydrothermal activity exists close to the stations that recorded dynamic triggering, however, it also exists near the East African Rift System structures where no triggering was observed. Our results suggest that factors other than solely tectonic regime and geothermalism are needed to explain the mechanisms that underlie earthquake triggering.

High-resolution earthquake relocation in the Fort Worth and Permian Basins using regional seismic stations

NASA Astrophysics Data System (ADS)

Ogwari, P.; DeShon, H. R.; Hornbach, M.

2017-12-01

Post-2008 earthquake rate increases in the Central United States have been associated with large-scale subsurface disposal of waste-fluids from oil and gas operations. The beginning of various earthquake sequences in Fort Worth and Permian basins have occurred in the absence of seismic stations at local distances to record and accurately locate hypocenters. Most typically, the initial earthquakes have been located using regional seismic network stations (>100km epicentral distance) and using global 1D velocity models, which usually results in large location uncertainty, especially in depth, does not resolve magnitude <2.5 events, and does not constrain the geometry of the activated fault(s). Here, we present a method to better resolve earthquake occurrence and location using matched filters and regional relative location when local data becomes available. We use the local distance data for high-resolution earthquake location, identifying earthquake templates and accurate source-station raypath velocities for the Pg and Lg phases at regional stations. A matched-filter analysis is then applied to seismograms recorded at US network stations and at adopted TA stations that record the earthquakes before and during the local network deployment period. Positive detections are declared based on manual review of associated with P and S arrivals on local stations. We apply hierarchical clustering to distinguish earthquakes that are both spatially clustered and spatially separated. Finally, we conduct relative earthquake and earthquake cluster location using regional station differential times. Initial analysis applied to the 2008-2009 DFW airport sequence in north Texas results in time continuous imaging of epicenters extending into 2014. Seventeen earthquakes in the USGS earthquake catalog scattered across a 10km2 area near DFW airport are relocated onto a single fault using these approaches. These techniques will also be applied toward imaging recent earthquakes in the

Statistical analysis of the ionospheric ion density recorded by DEMETER in the epicenter areas of earthquakes as well as in their magnetically conjugate point areas

NASA Astrophysics Data System (ADS)

Li, Mei; Parrot, Michel

2018-02-01

Results of a statistical variation of total ion density observed in the vicinity of epicenters as well as around magnetically conjugated points of earthquakes are presented in this paper. Two data sets are used: the ion density measured by DEMETER during about 6.5 years and the list of strong earthquakes (MW ≥ 4.8) occurring globally during this period (14,764 earthquakes in total). First of all, ionospheric perturbations with 23-120 s observation time corresponding to spatial scales of 160-840 km are automatically detected by a software (64,287 anomalies in total). Second, it is checked if a perturbation could be associated either with the epicenter of an earthquake or with its magnetically conjugated point (distance < 1500 km and time < 15 days before the earthquake). The index Kp < 3 is also considered in order to reduce the effect of the geomagnetic activity on the ionosphere during this period. The results show that it is possible to detect variations of the ionospheric parameters above the epicenter areas as well as above their conjugated points. About one third of the earthquakes are detected with ionospheric influence on both sides of the Earth. There is a trend showing that the perturbation length increases as the magnitude of the detected EQs but it is more obvious for large magnitude. The probability that a perturbation appears is higher on the day of the earthquake and then gradually decreases when the time before the earthquake increases. The spatial distribution of perturbations shows that the probability of perturbations appearing southeast of the epicenter before an earthquake is a little bit higher and that there is an obvious trend because perturbations appear west of the conjugated point of an earthquake.

Abundant aftershock sequence of the 2015 Mw7.5 Hindu Kush intermediate-depth earthquake

NASA Astrophysics Data System (ADS)

Li, Chenyu; Peng, Zhigang; Yao, Dongdong; Guo, Hao; Zhan, Zhongwen; Zhang, Haijiang

2018-05-01

The 2015 Mw7.5 Hindu Kush earthquake occurred at a depth of 213 km beneath the Hindu Kush region of Afghanistan. While many early aftershocks were missing from the global earthquake catalogues, this sequence was recorded continuously by eight broad-band stations within 500 km. Here we use a waveform matching technique to systematically detect earthquakes around the main shock. More than 3000 events are detected within 35 d after the main shock, as compared with 42 listed in the Advanced National Seismic System catalogue (or 196 in the International Seismological Centre catalogue). The aftershock sequence generally follows the Omori's law with a decay constant p = 0.92. We also apply the recently developed double-pair double-difference technique to relocate all detected aftershocks. Most of them are located to the west of the hypocentre of the main shock, consistent with the westward propagation of the main-shock rupture. The aftershocks outline a nearly vertical southward dipping plane, which matches well with one of the nodal planes of the main shock. We conclude that the aftershock sequence of this intermediate-depth earthquake shares many similarities with those for shallow earthquakes and infer that there are some common mechanisms responsible for shallow and intermediate-depth earthquakes.

Wrightwood and the earthquake cycle: What a long recurrence record tells us about how faults work

USGS Publications Warehouse

Weldon, R.; Scharer, K.; Fumal, T.; Biasi, G.

2004-01-01

The concept of the earthquake cycle is so well established that one often hears statements in the popular media like, "the Big One is overdue" and "the longer it waits, the bigger it will be." Surprisingly, data to critically test the variability in recurrence intervals, rupture displacements, and relationships between the two are almost nonexistent. To generate a long series of earthquake intervals and offsets, we have conducted paleoseismic investigations across the San Andreas fault near the town of Wrightwood, California, excavating 45 trenches over 18 years, and can now provide some answers to basic questions about recurrence behavior of large earthquakes. To date, we have characterized at least 30 prehistoric earthquakes in a 6000-yr-long record, complete for the past 1500 yr and for the interval 3000-1500 B.C. For the past 1500 yr, the mean recurrence interval is 105 yr (31-165 yr for individual intervals) and the mean slip is 3.2 m (0.7-7 m per event). The series is slightly more ordered than random and has a notable cluster of events, during which strain was released at 3 times the long-term average rate. Slip associated with an earthquake is not well predicted by the interval preceding it, and only the largest two earthquakes appear to affect the time interval to the next earthquake. Generally, short intervals tend to coincide with large displacements and long intervals with small displacements. The most significant correlation we find is that earthquakes are more frequent following periods of net strain accumulation spanning multiple seismic cycles. The extent of paleoearthquake ruptures may be inferred by correlating event ages between different sites along the San Andreas fault. Wrightwood and other nearby sites experience rupture that could be attributed to overlap of relatively independent segments that each behave in a more regular manner. However, the data are equally consistent with a model in which the irregular behavior seen at Wrightwood

Early Earthquakes of the Americas

NASA Astrophysics Data System (ADS)

Ni, James

2004-11-01

Robert Kovach's second book looks at the interplay of earthquake and volcanic events, archeology, and history in the Americas. Throughout history, major earthquakes have caused the deaths of millions of people and have damaged countless cities. Earthquakes undoubtedly damaged prehistoric cities in the Americas, and evidence of these events could be preserved in archeological records. Kovach asks, Did indigenous native cultures-Indians of the Pacific Northwest, Aztecs, Mayas, and Incas-document their natural history? Some events have been explicitly documented, for example, in Mayan codices, but many may have been recorded as myth and legend. Kovach's discussions of how early cultures dealt with fearful events such as earthquakes and volcanic eruptions are colorful, informative, and entertaining, and include, for example, a depiction of how the Maya would talk to maize plants in their fields during earthquakes to reassure them.

GPS Technologies as a Tool to Detect the Pre-Earthquake Signals Associated with Strong Earthquakes

NASA Astrophysics Data System (ADS)

Pulinets, S. A.; Krankowski, A.; Hernandez-Pajares, M.; Liu, J. Y. G.; Hattori, K.; Davidenko, D.; Ouzounov, D.

2015-12-01

The existence of ionospheric anomalies before earthquakes is now widely accepted. These phenomena started to be considered by GPS community to mitigate the GPS signal degradation over the territories of the earthquake preparation. The question is still open if they could be useful for seismology and for short-term earthquake forecast. More than decade of intensive studies proved that ionospheric anomalies registered before earthquakes are initiated by processes in the boundary layer of atmosphere over earthquake preparation zone and are induced in the ionosphere by electromagnetic coupling through the Global Electric Circuit. Multiparameter approach based on the Lithosphere-Atmosphere-Ionosphere Coupling model demonstrated that earthquake forecast is possible only if we consider the final stage of earthquake preparation in the multidimensional space where every dimension is one from many precursors in ensemble, and they are synergistically connected. We demonstrate approaches developed in different countries (Russia, Taiwan, Japan, Spain, and Poland) within the framework of the ISSI and ESA projects) to identify the ionospheric precursors. They are also useful to determine the all three parameters necessary for the earthquake forecast: impending earthquake epicenter position, expectation time and magnitude. These parameters are calculated using different technologies of GPS signal processing: time series, correlation, spectral analysis, ionospheric tomography, wave propagation, etc. Obtained results from different teams demonstrate the high level of statistical significance and physical justification what gives us reason to suggest these methodologies for practical validation.

Gas injection may have triggered earthquakes in the Cogdell oil field, Texas.

PubMed

Gan, Wei; Frohlich, Cliff

2013-11-19

Between 1957 and 1982, water flooding was conducted to improve petroleum production in the Cogdell oil field north of Snyder, TX, and a contemporary analysis concluded this induced earthquakes that occurred between 1975 and 1982. The National Earthquake Information Center detected no further activity between 1983 and 2005, but between 2006 and 2011 reported 18 earthquakes having magnitudes 3 and greater. To investigate these earthquakes, we analyzed data recorded by six temporary seismograph stations deployed by the USArray program, and identified 93 well-recorded earthquakes occurring between March 2009 and December 2010. Relocation with a double-difference method shows that most earthquakes occurred within several northeast-southwest-trending linear clusters, with trends corresponding to nodal planes of regional focal mechanisms, possibly indicating the presence of previously unidentified faults. We have evaluated data concerning injection and extraction of oil, water, and gas in the Cogdell field. Water injection cannot explain the 2006-2011 earthquakes, especially as net volumes (injection minus extraction) are significantly less than in the 1957-1982 period. However, since 2004 significant volumes of gases including supercritical CO2 have been injected into the Cogdell field. The timing of gas injection suggests it may have contributed to triggering the recent seismic activity. If so, this represents an instance where gas injection has triggered earthquakes having magnitudes 3 and larger. Further modeling studies may help evaluate recent assertions suggesting significant risks accompany large-scale carbon capture and storage as a strategy for managing climate change.

Detection of collapsed buildings from lidar data due to the 2016 Kumamoto earthquake in Japan

NASA Astrophysics Data System (ADS)

Moya, Luis; Yamazaki, Fumio; Liu, Wen; Yamada, Masumi

2018-01-01

The 2016 Kumamoto earthquake sequence was triggered by an Mw 6.2 event at 21:26 on 14 April. Approximately 28 h later, at 01:25 on 16 April, an Mw 7.0 event (the mainshock) followed. The epicenters of both events were located near the residential area of Mashiki and affected the region nearby. Due to very strong seismic ground motion, the earthquake produced extensive damage to buildings and infrastructure. In this paper, collapsed buildings were detected using a pair of digital surface models (DSMs), taken before and after the 16 April mainshock by airborne light detection and ranging (lidar) flights. Different methods were evaluated to identify collapsed buildings from the DSMs. The change in average elevation within a building footprint was found to be the most important factor. Finally, the distribution of collapsed buildings in the study area was presented, and the result was consistent with that of a building damage survey performed after the earthquake.

Acoustic monitoring of earthquakes along the Blanco Transform Fault zone and Gorda Plate and their tectonic implications

NASA Astrophysics Data System (ADS)

Dziak, Robert Paul

Hydroacoustic tertiary (T-) waves are seismically generated acoustic waves that propagate over great distances in the ocean sound channel with little loss in signal strength. Hydrophone recorded T-waves can provide a lower earthquake detection threshold and an improved epicenter location accuracy for oceanic earthquakes than land-based seismic networks. Thus detection and location of NE Pacific ocean earthquakes along the Blanco Transform Fault (BTFZ) and Gorda plate using the U.S. Navy's SOSUS (SOund SUrveillance System) hydrophone arrays afford greater insight into the current state of stress and crustal deformation mechanics than previously available. Acoustic earthquake information combined with bathymetry, submersible observations, earthquake source- parameter estimates, petrologic samples, and water-column chemistry renders a new tectonic view of the southern Juan de Fuca plate boundaries. Chapter 2 discusses development of seismo-acoustic analysis techniques using the well-documented April 1992 Cape Mendocino earthquake sequence. Findings include a hydrophone detection threshold estimate (M ~ 2.4), and T-wave propagation path modeling to approximate earthquake acoustic source energy. Empirical analyses indicate that acoustic energy provides a reasonable magnitude and seismic moment estimate of oceanic earthquakes not detected by seismic networks. Chapters 3 documents a probable volcanogenic T-wave event swarm along a pull-apart basin within the western BTFZ during January 1994. Response efforts yielded evidence of anomalous water-column 3He concentrations, pillow- lava volcanism, and the first discovery of active hydrothermal vents along an oceanic fracture zone. Chapter 4 discusses the detection of a NE-SW trending microearthquake band along the mid-Gorda plate which was active from initiation of SOSUS recording in August 1991 through July 1992, then abruptly ceased. It is proposed that eventual termination of the Gorda plate seismicity band is due to

The study of key issues about integration of GNSS and strong-motion records for real-time earthquake monitoring

NASA Astrophysics Data System (ADS)

Tu, Rui; Zhang, Pengfei; Zhang, Rui; Liu, Jinhai

2016-08-01

This paper has studied the key issues about integration of GNSS and strong-motion records for real-time earthquake monitoring. The validations show that the consistence of the coordinate system must be considered firstly to exclude the system bias between GNSS and strong-motion. The GNSS sampling rate is suggested about 1-5 Hz, and we should give the strong-motion's baseline shift with a larger dynamic noise as its variation is very swift. The initialization time of solving the baseline shift is less than one minute, and ambiguity resolution strategy is not greatly improved the solution. The data quality is very important for the solution, we advised to use multi-frequency and multi-system observations. These ideas give an important guide for real-time earthquake monitoring and early warning by the tight integration of GNSS and strong-motion records.

2010 Chile Earthquake Aftershock Response

NASA Astrophysics Data System (ADS)

Barientos, Sergio

2010-05-01

The Mw=8.8 earthquake off the coast of Chile on 27 February 2010 is the 5th largest megathrust earthquake ever to be recorded and provides an unprecedented opportunity to advance our understanding of megathrust earthquakes and associated phenomena. The 2010 Chile earthquake ruptured the Concepcion-Constitucion segment of the Nazca/South America plate boundary, south of the Central Chile region and triggered a tsunami along the coast. Following the 2010 earthquake, a very energetic aftershock sequence is being observed in an area that is 600 km along strike from Valparaiso to 150 km south of Concepcion. Within the first three weeks there were over 260 aftershocks with magnitude 5.0 or greater and 18 with magnitude 6.0 or greater (NEIC, USGS). The Concepcion-Constitucion segment lies immediately north of the rupture zone associated with the great magnitude 9.5 Chile earthquake, and south of the 1906 and the 1985 Valparaiso earthquakes. The last great subduction earthquake in the region dates back to the February 1835 event described by Darwin (1871). Since 1835, part of the region was affected in the north by the Talca earthquake in December 1928, interpreted as a shallow dipping thrust event, and by the Chillan earthquake (Mw 7.9, January 1939), a slab-pull intermediate depth earthquake. For the last 30 years, geodetic studies in this area were consistent with a fully coupled elastic loading of the subduction interface at depth; this led to identify the area as a mature seismic gap with potential for an earthquake of magnitude of the order 8.5 or several earthquakes of lesser magnitude. What was less expected was the partial rupturing of the 1985 segment toward north. Today, the 2010 earthquake raises some disturbing questions: Why and how the rupture terminated where it did at the northern end? How did the 2010 earthquake load the adjacent segment to the north and did the 1985 earthquake only partially ruptured the plate interface leaving loaded asperities since

Earthquake Catalogue of the Caucasus

NASA Astrophysics Data System (ADS)

Godoladze, T.; Gok, R.; Tvaradze, N.; Tumanova, N.; Gunia, I.; Onur, T.

2016-12-01

The Caucasus has a documented historical catalog stretching back to the beginning of the Christian era. Most of the largest historical earthquakes prior to the 19th century are assumed to have occurred on active faults of the Greater Caucasus. Important earthquakes include the Samtskhe earthquake of 1283 (Ms˜7.0, Io=9); Lechkhumi-Svaneti earthquake of 1350 (Ms˜7.0, Io=9); and the Alaverdi earthquake of 1742 (Ms˜6.8, Io=9). Two significant historical earthquakes that may have occurred within the Javakheti plateau in the Lesser Caucasus are the Tmogvi earthquake of 1088 (Ms˜6.5, Io=9) and the Akhalkalaki earthquake of 1899 (Ms˜6.3, Io =8-9). Large earthquakes that occurred in the Caucasus within the period of instrumental observation are: Gori 1920; Tabatskuri 1940; Chkhalta 1963; Racha earthquake of 1991 (Ms=7.0), is the largest event ever recorded in the region; Barisakho earthquake of 1992 (M=6.5); Spitak earthquake of 1988 (Ms=6.9, 100 km south of Tbilisi), which killed over 50,000 people in Armenia. Recently, permanent broadband stations have been deployed across the region as part of the various national networks (Georgia (˜25 stations), Azerbaijan (˜35 stations), Armenia (˜14 stations)). The data from the last 10 years of observation provides an opportunity to perform modern, fundamental scientific investigations. In order to improve seismic data quality a catalog of all instrumentally recorded earthquakes has been compiled by the IES (Institute of Earth Sciences/NSMC, Ilia State University) in the framework of regional joint project (Armenia, Azerbaijan, Georgia, Turkey, USA) "Probabilistic Seismic Hazard Assessment (PSHA) in the Caucasus. The catalogue consists of more then 80,000 events. First arrivals of each earthquake of Mw>=4.0 have been carefully examined. To reduce calculation errors, we corrected arrivals from the seismic records. We improved locations of the events and recalculate Moment magnitudes in order to obtain unified magnitude

Earthquake triggering by seismic waves following the landers and hector mine earthquakes

USGS Publications Warehouse

Gomberg, J.; Reasenberg, P.A.; Bodin, P.; Harris, R.A.

2001-01-01

The proximity and similarity of the 1992, magnitude 7.3 Landers and 1999, magnitude 7.1 Hector Mine earthquakes in California permit testing of earthquake triggering hypotheses not previously possible. The Hector Mine earthquake confirmed inferences that transient, oscillatory 'dynamic' deformations radiated as seismic waves can trigger seismicity rate increases, as proposed for the Landers earthquake1-6. Here we quantify the spatial and temporal patterns of the seismicity rate changes7. The seismicity rate increase was to the north for the Landers earthquake and primarily to the south for the Hector Mine earthquake. We suggest that rupture directivity results in elevated dynamic deformations north and south of the Landers and Hector Mine faults, respectively, as evident in the asymmetry of the recorded seismic velocity fields. Both dynamic and static stress changes seem important for triggering in the near field with dynamic stress changes dominating at greater distances. Peak seismic velocities recorded for each earthquake suggest the existence of, and place bounds on, dynamic triggering thresholds. These thresholds vary from a few tenths to a few MPa in most places, depend on local conditions, and exceed inferred static thresholds by more than an order of magnitude. At some sites, the onset of triggering was delayed until after the dynamic deformations subsided. Physical mechanisms consistent with all these observations may be similar to those that give rise to liquefaction or cyclic fatigue.

Evaluating changes of the Bárdarbunga caldera using repeating earthquakes

NASA Astrophysics Data System (ADS)

Jónsdóttir, K.; Hjorleifsdottir, V.; Hooper, A.; Rivalta, E.; Rodriguez Cardozo, F. R.; Gudmundsson, M. T.; Geirsson, H.; Barsotti, S.

2017-12-01

The natural hazard monitoring in Iceland relies heavily on seismic monitoring. With an automated system for detecting earthquakes, locating and evaluating their focal mechanisms, 500 earthquakes are recorded weekly with magnitudes down to -0.5. During the Bárdarbunga volcanic unrest in 2014-2015 the seismicity intensified and up to thousands of earthquakes were recorded daily. The unrest was accompanied by caldera collapse, a rare event that has not been monitored in such detail before, providing a unique opportunity for better understanding the volcanic structure and processes. The 8x11 km caldera gradually subsided, triggering thousands of events with 80 earthquakes between M5-M5.8. A subsidence bowl up to 65 m deep was formed, while about 1.8 km3 of magma drained laterally along a subterranean path, forming flood basalt 47 km northeast of the volcano. The caldera collapse and magma outflow gradually declined until the eruption ended some 6 months later (27 February 2015). The seismicity continued to decline, both in the far end of the dyke as well as within the caldera for a few months. However, half a year later (in September 2015) seismicity within the caldera started to increase again and has been rather constant since, with tens of earthquakes recorded on the caldera rim every week and biggest events reaching magnitude 4.4. Here we present a seismic waveform correlation analysis where we look for similar repeating waveforms of the large caldera dataset. The analysis reveals a dramatic change occurring between February and May 2015. By allowing for anticorrelation we find that the earthquake's polarity reverses sign completely. The timing coincides with the ending of the caldera collapse and the eruption. Our results suggest that caldera fault movements were reversed soon after the eruption ended in spring 2015 when we also observe outwards movement of GPS stations around the caldera, indicating re-inflation of the magma chamber half a year before any

A short note on ground-motion recordings from the M 7.9 Wenchuan, China, earthquake and ground-motion prediction equations in the Central and Eastern United States

USGS Publications Warehouse

Wang, Z.; Lu, M.

2011-01-01

The 12 May 2008 Wenchuan earthquake (M 7.9) occurred along the western edge of the eastern China SCR and was well recorded by modern strong-motion instruments: 93 strong-motion stations within 1.4 to 300 km rupture distance recorded the main event. Preliminary comparisons show some similarities between ground-motion attenuation in the Wenchuan region and the central and eastern United States, suggesting that ground motions from the Wenchuan earthquake could be used as a database providing constraints for developing GMPEs for large earthquakes in the central and eastern United States.

@INGVterremoti: Tweeting the Automatic Detection of Earthquakes

NASA Astrophysics Data System (ADS)

Casarotti, E.; Amato, A.; Comunello, F.; Lauciani, V.; Nostro, C.; Polidoro, P.

2014-12-01

The use of social media is emerging as a powerful tool fordisseminating trusted information about earthquakes. Since 2009, theTwitter account @INGVterremoti provides constant and timely detailsabout M2+ seismic events detected by the Italian National SeismicNetwork, directly connected with the seismologists on duty at IstitutoNazionale di Geofisica e Vulcanologia (INGV). After the 2012 seismicsequence, the account has been awarded by a national prize as the"most useful Twitter account". Currently, it updates more than 110,000followers (one the first 50 Italian Twitter accounts for number offollowers). Nevertheless, since it provides only the manual revisionof seismic parameters, the timing (approximately between 10 and 20minutes after an event) has started to be under evaluation.Undeniably, mobile internet, social network sites and Twitter in particularrequire a more rapid and "real-time" reaction.During the last 18 months, INGV tested the tweeting of the automaticdetection of M3+ earthquakes, obtaining results reliable enough to bereleased openly 1 or 2 minutes after a seismic event. During the summerof 2014, INGV, with the collaboration of CORIS (Department ofCommunication and Social Research, Sapienza University of Rome),involved the followers of @INGVterremoti and citizens, carrying out aquali-quantitative study (through in-depth interviews and a websurvey) in order to evaluate the best format to deliver suchinformation. In this presentation we will illustrate the results of the reliability test and theanalysis of the survey.

Catalog of earthquake hypocenters at Alaskan volcanoes: January 1 through December 31, 2006

USGS Publications Warehouse

Dixon, James P.; Stihler, Scott D.; Power, John A.; Searcy, Cheryl

2008-01-01

Between January 1 and December 31, 2006, AVO located 8,666 earthquakes of which 7,783 occurred on or near the 33 volcanoes monitored within Alaska. Monitoring highlights in 2006 include: an eruption of Augustine Volcano, a volcanic-tectonic earthquake swarm at Mount Martin, elevated seismicity and volcanic unrest at Fourpeaked Mountain, and elevated seismicity and low-level tremor at Mount Veniaminof and Korovin Volcano. A new seismic subnetwork was installed on Fourpeaked Mountain. This catalog includes: (1) descriptions and locations of seismic instrumentation deployed in the field during 2006, (2) a description of earthquake detection, recording, analysis, and data archival systems, (3) a description of seismic velocity models used for earthquake locations, (4) a summary of earthquakes located in 2006, and (5) an accompanying UNIX tar-file with a summary of earthquake origin times, hypocenters, magnitudes, phase arrival times, location quality statistics, daily station usage statistics, and all files used to determine the earthquake locations in 2006.

Luzon earthquake strongest in 90 years

NASA Astrophysics Data System (ADS)

The magnitude 7.7 Philippine earthquake that took place 2 weeks ago was the strongest recorded on the island of Luzon in nearly 90 years and the strongest in all of the Philippines in nearly 14 years, according to the U.S. Geological Survey.The earthquake occurred 60 miles north of Manila and was the third strongest recorded on Luzon, exceeded only by an earthquake with an estimated magnitude of 7.8, on December 14, 1901, near Lucena, about 80 miles southeast of Manila, and an earthquake with an estimated magnitude of 7.9 on August 15, 1897, off the northwest coast of Luzon.

Source characteristics and geological implications of the January 2016 induced earthquake swarm near Crooked Lake, Alberta

NASA Astrophysics Data System (ADS)

Wang, Ruijia; Gu, Yu Jeffrey; Schultz, Ryan; Zhang, Miao; Kim, Ahyi

2017-08-01

On 2016 January 12, an intraplate earthquake with an initial reported local magnitude (ML) of 4.8 shook the town of Fox Creek, Alberta. While there were no reported damages, this earthquake was widely felt by the local residents and suspected to be induced by the nearby hydraulic-fracturing (HF) operations. In this study, we determine the earthquake source parameters using moment tensor inversions, and then detect and locate the associated swarm using a waveform cross-correlation based method. The broad-band seismic recordings from regional arrays suggest a moment magnitude (M) 4.1 for this event, which is the largest in Alberta in the past decade. Similar to other recent M ∼ 3 earthquakes near Fox Creek, the 2016 January 12 earthquake exhibits a dominant strike-slip (strike = 184°) mechanism with limited non-double-couple components (∼22 per cent). This resolved focal mechanism, which is also supported by forward modelling and P-wave first motion analysis, indicates an NE-SW oriented compressional axis consistent with the maximum compressive horizontal stress orientations delineated from borehole breakouts. Further detection analysis on industry-contributed recordings unveils 1108 smaller events within 3 km radius of the epicentre of the main event, showing a close spatial-temporal relation to a nearby HF well. The majority of the detected events are located above the basement, comparable to the injection depth (3.5 km) on the Duvernay shale Formation. The spatial distribution of this earthquake cluster further suggests that (1) the source of the sequence is an N-S-striking fault system and (2) these earthquakes were induced by an HF well close to but different from the well that triggered a previous (January 2015) earthquake swarm. Reactivation of pre-existing, N-S oriented faults analogous to the Pine Creek fault zone, which was reported by earlier studies of active source seismic and aeromagnetic data, are likely responsible for the occurrence of the

Detection limits of tidal-wetland sequences to identify variable rupture modes of megathrust earthquakes

NASA Astrophysics Data System (ADS)

Shennan, Ian; Garrett, Ed; Barlow, Natasha

2016-10-01

Recent paleoseismological studies question whether segment boundaries identified for 20th and 21st century great, >M8, earthquakes persist through multiple earthquake cycles or whether smaller segments with different boundaries rupture and cause significant hazards. The smaller segments may include some currently slipping rather than locked. In this review, we outline general principles regarding indicators of relative sea-level change in tidal wetlands and the conditions in which paleoseismic indicators must be distinct from those resulting from non-seismic processes. We present new evidence from sites across southcentral Alaska to illustrate different detection limits of paleoseismic indicators and consider alternative interpretations for marsh submergence and emergence. We compare predictions of coseismic uplift and subsidence derived from geophysical models of earthquakes with different rupture modes. The spatial patterns of agreement and misfits between model predictions and quantitative reconstructions of coseismic submergence and emergence suggest that no earthquake within the last 4000 years had a pattern of rupture the same as the Mw 9.2 Alaska earthquake in 1964. From the Alaska examples and research from other subduction zones we suggest that If we want to understand whether a megathrust ruptures in segments of variable length in different earthquakes, we need to be site-specific as to what sort of geological-based criteria eliminate the possibility of a particular rupture mode in different earthquakes. We conclude that coastal paleoseismological studies benefit from a methodological framework that employs rigorous evaluation of five essential criteria and a sixth which may be very robust but only occur at some sites: 1 - lateral extent of peat-mud or mud-peat couplets with sharp contacts; 2 - suddenness of submergence or emergence, and replicated within each site; 3 - amount of vertical motion, quantified with 95% error terms and replicated within each

Continuous Record of Permeability inside the Wenchuan Earthquake Fault Zone

NASA Astrophysics Data System (ADS)

Xue, Lian; Li, Haibing; Brodsky, Emily

2013-04-01

Faults are complex hydrogeological structures which include a highly permeable damage zone with fracture-dominated permeability. Since fractures are generated by earthquakes, we would expect that in the aftermath of a large earthquake, the permeability would be transiently high in a fault zone. Over time, the permeability may recover due to a combination of chemical and mechanical processes. However, the in situ fault zone hydrological properties are difficult to measure and have never been directly constrained on a fault zone immediately after a large earthquake. In this work, we use water level response to solid Earth tides to constrain the hydraulic properties inside the Wenchuan Earthquake Fault Zone. The transmissivity and storage determine the phase and amplitude response of the water level to the tidal loading. By measuring phase and amplitude response, we can constrain the average hydraulic properties of the damage zone at 800-1200 m below the surface (~200-600 m from the principal slip zone). We use Markov chain Monte Carlo methods to evaluate the phase and amplitude responses and the corresponding errors for the largest semidiurnal Earth tide M2 in the time domain. The average phase lag is ~ 30o, and the average amplitude response is 6×10-7 strain/m. Assuming an isotropic, homogenous and laterally extensive aquifer, the average storage coefficient S is 2×10-4 and the average transmissivity T is 6×10-7 m2 using the measured phase and the amplitude response. Calculation for the hydraulic diffusivity D with D=T/S, yields the reported value of D is 3×10-3 m2/s, which is two orders of magnitude larger than pump test values on the Chelungpu Fault which is the site of the Mw 7.6 Chi-Chi earthquake. If the value is representative of the fault zone, then this means the hydrology processes should have an effect on the earthquake rupture process. This measurement is done through continuous monitoring and we could track the evolution for hydraulic properties

Slow Earthquakes in the Alaska-Aleutian Subduction Zone Detected by Multiple Mini Seismic Arrays

NASA Astrophysics Data System (ADS)

LI, B.; Ghosh, A.; Thurber, C. H.; Lanza, F.

2017-12-01

The Alaska-Aleutian subduction zone is one of the most seismically and volcanically active plate boundaries on earth. Compared to other subduction zones, the slow earthquakes, such as tectonic tremors (TTs) and low frequency earthquakes (LFEs), are relatively poorly studied due to the limited data availability and difficult logistics. The analysis of two-months of continuous data from a mini array deployed in 2012 shows abundant tremor and LFE activities under Unalaska Island that is heterogeneously distributed [Li & Ghosh, 2017]. To better study slow earthquakes and understand their physical characteristics in the study region, we deployed a hybrid array of arrays, consisting of three well-designed mini seismic arrays and five stand alone stations, in the Unalaska Island in 2014. They were operational for between one and two years. Using the beam back-projection method [Ghosh et al., 2009, 2012], we detect continuous tremor activities for over a year when all three arrays are running. The sources of tremors are located south of the Unalaska and Akutan Islands, at the eastern and down-dip edge of the rupture zone of the 1957 Mw 8.6 earthquake, and they are clustered in several patches, with a gap between the two major clusters. Tremors show multiple migration patterns with propagation in both along-strike and dip directions and a wide range of velocities. We also identify tens of LFE families and use them as templates to search for repeating LFE events with the matched-filter method. Hundreds to thousands of LFEs for each family are detected and their activities are spatiotemporally consistent with tremor activities. The array techniques are revealing a near-continuous tremor activity in this area with remarkable spatiotemporal details. It helps us to better recognize the physical properties of the transition zone, provides new insights into the slow earthquake activities in this area, and explores their relation with the local earthquakes and the potential slow

Characterization of the 2015 M4.0 Venus, Texas, Earthquake Sequence Using Locally Recorded Seismic Data

NASA Astrophysics Data System (ADS)

Scales, M. M.; DeShon, H. R.; Hayward, C.; Magnani, M. B.; Walter, J. I.; Pratt, T. L.

2015-12-01

We present high-resolution relative earthquake relocations derived using differential time data from waveform cross-correlation and first motion fault plane solutions to characterize the 2015 M4.0 Venus, TX, earthquake sequence. On 7 May 2015, a M4.0 earthquake occurred in Johnson County, TX, south of the Dallas-Fort Worth metroplex. It is the largest event recorded to date in the Fort Worth (Barnett Shale) Basin, which is an active shale gas production area that has been associated with induced earthquakes. The USGS moment tensor indicated normal faulting along NE-SW trending faults and two additional felt aftershocks were reported in the National Earthquake Information Center catalog. Beginning on 11 May 2015, a temporary seismic network was deployed. Over the first week, SMU deployed 13 vertical-component RT125s and 3 USGS NetQuakes instruments. The RT125s were replaced with 7 short-period 3-component instruments provided by IRIS and 4 broadband stations deployed throughout Johnson County by the University of Texas. To date, we have located over 100 events that define a 5 km long normal fault striking 35°NE and dipping ~70°. Events occur in the Precambrian granitic basement at depths of 4-6km. These locations are near the bottom of the Ellenburger Group (~3.5km in depth), which is an Ordovician carbonate platform overlying the basement and is often used for wastewater disposal. Five large volume injection wells operate within 10km of the earthquake sequence and inject very near, if not through, the Ellenburger-basement contact. These wells were temporarily shut down by the Texas Railroad Commission for testing but were reported at the time to have no causal effect on the earthquake activity. We explore temporal and spatial correlations between seismicity, wastewater injection data and subsurface fault data to better understand the cause of the Venus sequence.

Source of the 1730 Chilean earthquake from historical records: Implications for the future tsunami hazard on the coast of Metropolitan Chile

NASA Astrophysics Data System (ADS)

Carvajal, M.; Cisternas, M.; Catalán, P. A.

2017-05-01

Historical records of an earthquake that occurred in 1730 affecting Metropolitan Chile provide essential clues on the source characteristics for the future earthquakes in the region. The earthquake and tsunami of 1730 have been recognized as the largest to occur in Metropolitan Chile since the beginning of written history. The earthquake destroyed buildings along >1000 km of the coast and produced a large tsunami that caused damage as far as Japan. Here its source characteristics are inferred by comparing local tsunami inundations computed from hypothetical earthquakes with varying magnitude and depth, with those inferred from historical observations. It is found that a 600-800 km long rupture involving average slip amounts of 10-14 m (Mw 9.1-9.3) best explains the observed tsunami heights and inundations. This large earthquake magnitude is supported by the 1730 tsunami heights inferred in Japan. The inundation results combined with local uplift reports suggest a southward increase of the slip depth along the rupture zone of the 1730 earthquake. While shallow slip on the area to the north of the 2010 earthquake rupture zone is required to explain the reported inundation, only deeper slip at this area can explain the coastal uplift reports. Since the later earthquakes of the region involved little or no slip at shallow depths, the near-future earthquakes on Metropolitan Chile could release the shallow slip accumulated since 1730 and thus lead to strong tsunami excitation. Moderate shaking from a shallow earthquake could delay tsunami evacuation for the most populated coastal region of Chile.

Multi-Parameter Observation and Detection of Pre-Earthquake Signals in Seismically Active Areas

NASA Technical Reports Server (NTRS)

Ouzounov, D.; Pulinets, S.; Parrot, M.; Liu, J. Y.; Hattori, K.; Kafatos, M.; Taylor, P.

2012-01-01

.9) in Taiwan and Japan. We have found anomalous behavior before all of these events with no false negatives. Calculated false alarm ratio for the for the same month over the entire period of analysis (2003-2009) is less than 10% and was d as the earthquakes. The commonalities in detecting atmospheric/ionospheric anomalies show that they may exist over both land and sea in regions of maximum stress (i.e., along plate boundaries) Our results indicate that the ISTF model could provide a capability to observe pre-earthquake atmospheric/ionospheric signals by combining this information into a common framework.

Strike-slip earthquakes can also be detected in the ionosphere

NASA Astrophysics Data System (ADS)

Astafyeva, Elvira; Rolland, Lucie M.; Sladen, Anthony

2014-11-01

It is generally assumed that co-seismic ionospheric disturbances are generated by large vertical static displacements of the ground during an earthquake. Consequently, it is expected that co-seismic ionospheric disturbances are only observable after earthquakes with a significant dip-slip component. Therefore, earthquakes dominated by strike-slip motion, i.e. with very little vertical co-seismic component, are not expected to generate ionospheric perturbations. In this work, we use total electron content (TEC) measurements from ground-based GNSS-receivers to study ionospheric response to six recent largest strike-slip earthquakes: the Mw7.8 Kunlun earthquake of 14 November 2001, the Mw8.1 Macquarie earthquake of 23 December 2004, the Sumatra earthquake doublet, Mw8.6 and Mw8.2, of 11 April 2012, the Mw7.7 Balochistan earthquake of 24 September 2013 and the Mw 7.7 Scotia Sea earthquake of 17 November 2013. We show that large strike-slip earthquakes generate large ionospheric perturbations of amplitude comparable with those induced by dip-slip earthquakes of equivalent magnitude. We consider that in the absence of significant vertical static co-seismic displacements of the ground, other seismological parameters (primarily the magnitude of co-seismic horizontal displacements, seismic fault dimensions, seismic slip) may contribute in generation of large-amplitude ionospheric perturbations.

Infrasound associated with 2004-2005 large Sumatra earthquakes and tsunami

NASA Astrophysics Data System (ADS)

Le Pichon, A.; Herry, P.; Mialle, P.; Vergoz, J.; Brachet, N.; Garcés, M.; Drob, D.; Ceranna, L.

2005-10-01

Large earthquakes that occurred in the Sumatra region in 2004 and 2005 generated acoustic waves recorded by the Diego Garcia infrasound array. The Progressive Multi-Channel Correlation (PMCC) analysis is performed to detect the seismic and infrasound signals associated with these events. The study is completed by an inverse location procedure that permitted reconstruction of the source location of the infrasonic waves. The results show that ground motion near the epicenter and vibrations of nearby land masses efficiently produced infrasound. The analysis also reveals unique evidence of long period pressure waves from the tsunami earthquake (M9.0) of December 26, 2004.

Gas injection may have triggered earthquakes in the Cogdell oil field, Texas

PubMed Central

Gan, Wei; Frohlich, Cliff

2013-01-01

Between 1957 and 1982, water flooding was conducted to improve petroleum production in the Cogdell oil field north of Snyder, TX, and a contemporary analysis concluded this induced earthquakes that occurred between 1975 and 1982. The National Earthquake Information Center detected no further activity between 1983 and 2005, but between 2006 and 2011 reported 18 earthquakes having magnitudes 3 and greater. To investigate these earthquakes, we analyzed data recorded by six temporary seismograph stations deployed by the USArray program, and identified 93 well-recorded earthquakes occurring between March 2009 and December 2010. Relocation with a double-difference method shows that most earthquakes occurred within several northeast–southwest-trending linear clusters, with trends corresponding to nodal planes of regional focal mechanisms, possibly indicating the presence of previously unidentified faults. We have evaluated data concerning injection and extraction of oil, water, and gas in the Cogdell field. Water injection cannot explain the 2006–2011 earthquakes, especially as net volumes (injection minus extraction) are significantly less than in the 1957–1982 period. However, since 2004 significant volumes of gases including supercritical CO2 have been injected into the Cogdell field. The timing of gas injection suggests it may have contributed to triggering the recent seismic activity. If so, this represents an instance where gas injection has triggered earthquakes having magnitudes 3 and larger. Further modeling studies may help evaluate recent assertions suggesting significant risks accompany large-scale carbon capture and storage as a strategy for managing climate change. PMID:24191019

The Determination Method of Extreme Earthquake Disaster Area Based on the Dust Detection Result from GF-4 Data

NASA Astrophysics Data System (ADS)

Dou, A.; Ding, L.; Chen, M.; Wang, X.

2018-04-01

The remote sensing has played an important role in many earthquake emergencies by rapidly providing the building damage, road damage, landslide and other disaster information. The earthquake in the mountains often caused to the loosening of the mountains and the blowing of the dust in the epicentre area. The dust particles are more serious in the epicentre area than the other disaster area. Basis on the analysis of abnormal spectrum characteristics, the dust detection methods from medium and high resolutions satellite imagery are studied in order to determinate the extreme earthquake disaster area. The results indicate the distribution of extreme disaster can be acquired using the dust detection information from imagery, which can provide great help for disaster intensity assessment.

Catalog of earthquake hypocenters at Alaskan volcanoes: January 1 through December 31, 2002

USGS Publications Warehouse

Dixon, James P.; Stihler, Scott D.; Power, John A.; Tytgat, Guy; Moran, Seth C.; Sánchez, John; Estes, Steve; McNutt, Stephen R.; Paskievitch, John

2003-01-01

an EARTHWORM detection system. AVO located 7430 earthquakes during 2002 in the vicinity of the monitored volcanoes. This catalog includes: (1) a description of instruments deployed in the field and their locations; (2) a description of earthquake detection, recording, analysis, and data archival systems; (3) a description of velocity models used for earthquake locations; (4) a summary of earthquakes located in 2002; and (5) an accompanying UNIX tar-file with a summary of earthquake origin times, hypocenters, magnitudes, and location quality statistics; daily station usage statistics; and all HYPOELLIPSE files used to determine the earthquake locations in 2002.The AVO seismic network was used to monitor twenty-four volcanoes in real time in 2002. These include Mount Wrangell, Mount Spurr, Redoubt Volcano, Iliamna Volcano, Augustine Volcano, Katmai Volcanic Group (Snowy Mountain, Mount Griggs, Mount Katmai, Novarupta, Trident Volcano, Mount Mageik, Mount Martin), Aniakchak Crater, Mount Veniaminof, Pavlof Volcano, Mount Dutton, Isanotski Peaks, Shishaldin Volcano, Fisher Caldera, Westdahl Peak, Akutan Peak, Makushin Volcano, Great Sitkin Volcano, and Kanaga Volcano (Figure 1). Monitoring highlights in 2002 include an earthquake swarm at Great Sitkin Volcano in May-June; an earthquake swarm near Snowy Mountain in July-September; low frequency (1-3 Hz) tremor and long-period events at Mount Veniaminof in September-October and in December; and continuing volcanogenic seismic swarms at Shishaldin Volcano throughout the year. Instrumentation and data acquisition highlights in 2002 were the installation of a subnetwork on Okmok Volcano, the establishment of telemetry for the Mount Veniaminof subnetwork, and the change in the data acquisition system to an EARTHWORM detection system. AVO located 7430 earthquakes during 2002 in the vicinity of the monitored volcanoes.This catalog includes: (1) a description of instruments deployed in the field and their locations; (2) a

Probablilistic evaluation of earthquake detection and location capability for Illinois, Indiana, Kentucky, Ohio, and West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauk, F.J.; Christensen, D.H.

1980-09-01

Probabilistic estimations of earthquake detection and location capabilities for the states of Illinois, Indiana, Kentucky, Ohio and West Virginia are presented in this document. The algorithm used in these epicentrality and minimum-magnitude estimations is a version of the program NETWORTH by Wirth, Blandford, and Husted (DARPA Order No. 2551, 1978) which was modified for local array evaluation at the University of Michigan Seismological Observatory. Estimations of earthquake detection capability for the years 1970 and 1980 are presented in four regional minimum m/sub b/ magnitude contour maps. Regional 90% confidence error ellipsoids are included for m/sub b/ magnitude events from 2.0more » through 5.0 at 0.5 m/sub b/ unit increments. The close agreement between these predicted epicentral 90% confidence estimates and the calculated error ellipses associated with actual earthquakes within the studied region suggest that these error determinations can be used to estimate the reliability of epicenter location. 8 refs., 14 figs., 2 tabs.« less

Development of a borehole stress meter for studying earthquake predictions and rock mechanics, and stress seismograms of the 2011 Tohoku earthquake ( M 9.0)

NASA Astrophysics Data System (ADS)

Ishii, Hiroshi; Asai, Yasuhiro

2015-02-01

Although precursory signs of an earthquake can occur before the event, it is difficult to observe such signs with precision, especially on earth's surface where artificial noise and other factors complicate signal detection. One possible solution to this problem is to install monitoring instruments into the deep bedrock where earthquakes are likely to begin. When evaluating earthquake occurrence, it is necessary to elucidate the processes of stress accumulation in a medium and then release as a fault (crack) is generated, and to do so, the stress must be observed continuously. However, continuous observations of stress have not been implemented yet for earthquake monitoring programs. Strain is a secondary physical quantity whose variation varies depending on the elastic coefficient of the medium, and it can yield potentially valuable information as well. This article describes the development of a borehole stress meter that is capable of recording both continuous stress and strain at a depth of about 1 km. Specifically, this paper introduces the design principles of the stress meter as well as its actual structure. It also describes a newly developed calibration procedure and the results obtained to date for stress and strain studies of deep boreholes at three locations in Japan. To show examples of the observations, records of stress seismic waveforms generated by the 2011 Tohoku earthquake ( M 9.0) are presented. The results demonstrate that the stress meter data have sufficient precision and reliability.

Repeating Earthquakes Following an Mw 4.4 Earthquake Near Luther, Oklahoma

NASA Astrophysics Data System (ADS)

Clements, T.; Keranen, K. M.; Savage, H. M.

2015-12-01

An Mw 4.4 earthquake on April 16, 2013 near Luther, OK was one of the earliest M4+ earthquakes in central Oklahoma, following the Prague sequence in 2011. A network of four local broadband seismometers deployed within a day of the Mw 4.4 event, along with six Oklahoma netquake stations, recorded more than 500 aftershocks in the two weeks following the Luther earthquake. Here we use HypoDD (Waldhauser & Ellsworth, 2000) and waveform cross-correlation to obtain precise aftershock locations. The location uncertainty, calculated using the SVD method in HypoDD, is ~15 m horizontally and ~ 35 m vertically. The earthquakes define a near vertical, NE-SW striking fault plane. Events occur at depths from 2 km to 3.5 km within the granitic basement, with a small fraction of events shallower, near the sediment-basement interface. Earthquakes occur within a zone of ~200 meters thickness on either side of the best-fitting fault surface. We use an equivalency class algorithm to identity clusters of repeating events, defined as event pairs with median three-component correlation > 0.97 across common stations (Aster & Scott, 1993). Repeating events occur as doublets of only two events in over 50% of cases; overall, 41% of earthquakes recorded occur as repeating events. The recurrence intervals for the repeating events range from minutes to days, with common recurrence intervals of less than two minutes. While clusters occur in tight dimensions, commonly of 80 m x 200 m, aftershocks occur in 3 distinct ~2km x 2km-sized patches along the fault. Our analysis suggests that with rapidly deployed local arrays, the plethora of ~Mw 4 earthquakes occurring in Oklahoma and Southern Kansas can be used to investigate the earthquake rupture process and the role of damage zones.

Application of τc*Pd for identifying damaging earthquakes for earthquake early warning

NASA Astrophysics Data System (ADS)

Huang, P. L.; Lin, T. L.; Wu, Y. M.

2014-12-01

Earthquake Early Warning System (EEWS) is an effective approach to mitigate earthquake damage. In this study, we used the seismic record by the Kiban Kyoshin network (KiK-net), because it has dense station coverage and co-located borehole strong-motion seismometers along with the free-surface strong-motion seismometers. We used inland earthquakes with moment magnitude (Mw) from 5.0 to 7.3 between 1998 and 2012. We choose 135 events and 10950 strong ground accelerograms recorded by the 696 strong ground accelerographs. Both the free-surface and the borehole data are used to calculate τc and Pd, respectively. The results show that τc*Pd has a good correlation with PGV and is a robust parameter for assessing the potential of damaging earthquake. We propose the value of τc*Pd determined from seconds after the arrival of P wave could be a threshold for the on-site type of EEW.

Methodology to determine the parameters of historical earthquakes in China

NASA Astrophysics Data System (ADS)

Wang, Jian; Lin, Guoliang; Zhang, Zhe

2017-12-01

China is one of the countries with the longest cultural tradition. Meanwhile, China has been suffering very heavy earthquake disasters; so, there are abundant earthquake recordings. In this paper, we try to sketch out historical earthquake sources and research achievements in China. We will introduce some basic information about the collections of historical earthquake sources, establishing intensity scale and the editions of historical earthquake catalogues. Spatial-temporal and magnitude distributions of historical earthquake are analyzed briefly. Besides traditional methods, we also illustrate a new approach to amend the parameters of historical earthquakes or even identify candidate zones for large historical or palaeo-earthquakes. In the new method, a relationship between instrumentally recorded small earthquakes and strong historical earthquakes is built up. Abundant historical earthquake sources and the achievements of historical earthquake research in China are of valuable cultural heritage in the world.

Exploring Earthquakes in Real-Time

NASA Astrophysics Data System (ADS)

Bravo, T. K.; Kafka, A. L.; Coleman, B.; Taber, J. J.

2013-12-01

Earthquakes capture the attention of students and inspire them to explore the Earth. Adding the ability to view and explore recordings of significant and newsworthy earthquakes in real-time makes the subject even more compelling. To address this opportunity, the Incorporated Research Institutions for Seismology (IRIS), in collaboration with Moravian College, developed ';jAmaSeis', a cross-platform application that enables students to access real-time earthquake waveform data. Students can watch as the seismic waves are recorded on their computer, and can be among the first to analyze the data from an earthquake. jAmaSeis facilitates student centered investigations of seismological concepts using either a low-cost educational seismograph or streamed data from other educational seismographs or from any seismic station that sends data to the IRIS Data Management System. After an earthquake, students can analyze the seismograms to determine characteristics of earthquakes such as time of occurrence, distance from the epicenter to the station, magnitude, and location. The software has been designed to provide graphical clues to guide students in the analysis and assist in their interpretations. Since jAmaSeis can simultaneously record up to three stations from anywhere on the planet, there are numerous opportunities for student driven investigations. For example, students can explore differences in the seismograms from different distances from an earthquake and compare waveforms from different azimuthal directions. Students can simultaneously monitor seismicity at a tectonic plate boundary and in the middle of the plate regardless of their school location. This can help students discover for themselves the ideas underlying seismic wave propagation, regional earthquake hazards, magnitude-frequency relationships, and the details of plate tectonics. The real-time nature of the data keeps the investigations dynamic, and offers students countless opportunities to explore.

Continuous Record of Permeability inside the Wenchuan Earthquake Fault Zone

NASA Astrophysics Data System (ADS)

Xue, L.; Li, H.; Brodsky, E. E.; Wang, H.; Pei, J.

2012-12-01

Faults are complex hydrogeological structures which include a highly permeable damage zone with fracture-dominated permeability. Since fractures are generated by earthquakes, we would expect that in the aftermath of a large earthquake, the permeability would be transiently high in a fault zone. Over time, the permeability may recover due to a combination of chemical and mechanical processes. However, the in situ fault zone hydrological properties are difficult to measure and have never been directly constrained on a fault zone immediately after a large earthquake. In this work, we use water level response to solid Earth tides to constrain the hydraulic properties inside the Wenchuan Earthquake Fault Zone. The transmissivity and storage determine the phase and amplitude response of the water level to the tidal loading. By measuring phase and amplitude response, we can constrain the average hydraulic properties of the damage zone at 800-1200 m below the surface (˜200-600 m from the principal slip zone). We use Markov chain Monte Carlo methods to evaluate the phase and amplitude responses and the corresponding errors for the largest semidiurnal Earth tide M2 in the time domain. The average phase lag is ˜30°, and the average amplitude response is 6×10-7 strain/m. Assuming an isotropic, homogenous and laterally extensive aquifer, the average storage coefficient S is 2×10-4 and the average transmissivity T is 6×10-7 m2 using the measured phase and the amplitude response. Calculation for the hydraulic diffusivity D with D=T/S, yields the reported value of D is 3×10-3 m2/s, which is two orders of magnitude larger than pump test values on the Chelungpu Fault which is the site of the Mw 7.6 Chi-Chi earthquake. If the value is representative of the fault zone, then this means the hydrology processes should have an effect on the earthquake rupture process. This measurement is done through continuous monitoring and we could track the evolution for hydraulic properties

Predecessors of the giant 1960 Chile earthquake

USGS Publications Warehouse

Cisternas, M.; Atwater, B.F.; Torrejon, F.; Sawai, Y.; Machuca, G.; Lagos, M.; Eipert, A.; Youlton, C.; Salgado, I.; Kamataki, T.; Shishikura, M.; Rajendran, C.P.; Malik, J.K.; Rizal, Y.; Husni, M.

2005-01-01

It is commonly thought that the longer the time since last earthquake, the larger the next earthquake's slip will be. But this logical predictor of earthquake size, unsuccessful for large earthquakes on a strike-slip fault, fails also with the giant 1960 Chile earthquake of magnitude 9.5 (ref. 3). Although the time since the preceding earthquake spanned 123 years (refs 4, 5), the estimated slip in 1960, which occurred on a fault between the Nazca and South American tectonic plates, equalled 250-350 years' worth of the plate motion. Thus the average interval between such giant earthquakes on this fault should span several centuries. Here we present evidence that such long intervals were indeed typical of the last two millennia. We use buried soils and sand layers as records of tectonic subsidence and tsunami inundation at an estuary midway along the 1960 rupture. In these records, the 1960 earthquake ended a recurrence interval that had begun almost four centuries before, with an earthquake documented by Spanish conquistadors in 1575. Two later earthquakes, in 1737 and 1837, produced little if any subsidence or tsunami at the estuary and they therefore probably left the fault partly loaded with accumulated plate motion that the 1960 earthquake then expended. ?? 2005 Nature Publishing Group.

Predecessors of the giant 1960 Chile earthquake.

PubMed

Cisternas, Marco; Atwater, Brian F; Torrejón, Fernando; Sawai, Yuki; Machuca, Gonzalo; Lagos, Marcelo; Eipert, Annaliese; Youlton, Cristián; Salgado, Ignacio; Kamataki, Takanobu; Shishikura, Masanobu; Rajendran, C P; Malik, Javed K; Rizal, Yan; Husni, Muhammad

2005-09-15

It is commonly thought that the longer the time since last earthquake, the larger the next earthquake's slip will be. But this logical predictor of earthquake size, unsuccessful for large earthquakes on a strike-slip fault, fails also with the giant 1960 Chile earthquake of magnitude 9.5 (ref. 3). Although the time since the preceding earthquake spanned 123 years (refs 4, 5), the estimated slip in 1960, which occurred on a fault between the Nazca and South American tectonic plates, equalled 250-350 years' worth of the plate motion. Thus the average interval between such giant earthquakes on this fault should span several centuries. Here we present evidence that such long intervals were indeed typical of the last two millennia. We use buried soils and sand layers as records of tectonic subsidence and tsunami inundation at an estuary midway along the 1960 rupture. In these records, the 1960 earthquake ended a recurrence interval that had begun almost four centuries before, with an earthquake documented by Spanish conquistadors in 1575. Two later earthquakes, in 1737 and 1837, produced little if any subsidence or tsunami at the estuary and they therefore probably left the fault partly loaded with accumulated plate motion that the 1960 earthquake then expended.

WHITTIER NARROWS, CALIFORNIA EARTHQUAKE OF OCTOBER 1, 1987-PRELIMINARY ASSESSMENT OF STRONG GROUND MOTION RECORDS.

USGS Publications Warehouse

Brady, A.G.; Etheredge, E.C.; Porcella, R.L.

1988-01-01

More than 250 strong-motion accelerograph stations were triggered by the Whittier Narrows, California earthquake of 1 October 1987. Considering the number of multichannel structural stations in the area of strong shaking, this set of records is one of the more significant in history. Three networks, operated by the U. S. Geological Survey, the California Division of Mines and Geology, and the University of Southern California produced the majority of the records. The excellent performance of the instruments in these and the smaller arrays is attributable to the quality of the maintenance programs. Readiness for a magnitude 8 event is directly related to these maintenance programs. Prior to computer analysis of the analog film records, a number of important structural resonant modes can be identified, and frequencies and simple mode shapes have been scaled.

Seismicity Increase in North China After the 2008 Mw7.9 Wenchuan Earthquake.

NASA Astrophysics Data System (ADS)

Goldhagen, G.; Li, C.; Peng, Z.; Wu, J.; Zhao, L.

2016-12-01

A large mainshock is capable of setting off an increase in seismicity in areas thousands of kilometers away. This phenomenon, known as remote triggering, is more likely to occur along active fault lines, aftershock zones, or regions with anthropogenic activities (e.g., mining, reservoirs, and fluid injections). By studying these susceptible areas, we can gain a better understanding of subsurface stress conditions, and long-range earthquake interactions. In this study we conduct a systematic search for remotely triggered seismicity in North China along two linear dense arrays (net code 1A and Z8) deployed by Chinese Academy of Sciences (CAS) following the 2008 Mw7.9 Wenchuan earthquake. A 5 Hz high pass filter is applied to the broadband seismogram recorded at the 1A array, which is more than 2,000 km away from the mainshock, in order to manually pick local events with double peaks. These local events have higher frequencies than earthquakes in the aftershock zone of the Wenchuan earthquake. An STA/LTA method is then employed as a way to automatically detect microseismicity in a section of the array that showed preliminary evidence of remote triggering. We find a clear increase of small earthquakes, right after the surface waves of the Wenchuan mainshock. These events, were recorded at stations close to the north section of the Tanlu fault and aftershock zones of the 1975, Ms7.3 Haicheng earthquake. This result suggests that remote triggering is more likely near active fault zones or other specific regions, as previous studies have proposed. Future work includes applying a waveform matching method to both arrays and automatically detecting micro-earthquakes missed on the catalog, and using them to better confirm the existence (or lack of) remote triggering following the Wenchuan mainshock. Our finding helps to better classify conditions that lead to the occurrence of remotely triggered earthquakes at intraplate regions.

Earthquake magnitude estimation using the τ c and P d method for earthquake early warning systems

NASA Astrophysics Data System (ADS)

Jin, Xing; Zhang, Hongcai; Li, Jun; Wei, Yongxiang; Ma, Qiang

2013-10-01

Earthquake early warning (EEW) systems are one of the most effective ways to reduce earthquake disaster. Earthquake magnitude estimation is one of the most important and also the most difficult parts of the entire EEW system. In this paper, based on 142 earthquake events and 253 seismic records that were recorded by the KiK-net in Japan, and aftershocks of the large Wenchuan earthquake in Sichuan, we obtained earthquake magnitude estimation relationships using the τ c and P d methods. The standard variances of magnitude calculation of these two formulas are ±0.65 and ±0.56, respectively. The P d value can also be used to estimate the peak ground motion of velocity, then warning information can be released to the public rapidly, according to the estimation results. In order to insure the stability and reliability of magnitude estimation results, we propose a compatibility test according to the natures of these two parameters. The reliability of the early warning information is significantly improved though this test.

Detection of Subtle Hydromechanical Medium Changes Caused By a Small-Magnitude Earthquake Swarm in NE Brazil

NASA Astrophysics Data System (ADS)

D'Hour, V.; Schimmel, M.; Do Nascimento, A. F.; Ferreira, J. M.; Lima Neto, H. C.

2016-04-01

Ambient noise correlation analyses are largely used in seismology to map heterogeneities and to monitor the temporal evolution of seismic velocity changes associated mostly with stress field variations and/or fluid movements. Here we analyse a small earthquake swarm related to a main mR 3.7 intraplate earthquake in North-East of Brazil to study the corresponding post-seismic effects on the medium. So far, post-seismic effects have been observed mainly for large magnitude events. In our study, we show that we were able to detect localized structural changes even for a small earthquake swarm in an intraplate setting. Different correlation strategies are presented and their performances are also shown. We compare the classical auto-correlation with and without pre-processing, including 1-bit normalization and spectral whitening, and the phase auto-correlation. The worst results were obtained for the pre-processed data due to the loss of waveform details. The best results were achieved with the phase cross-correlation which is amplitude unbiased and sensitive to small amplitude changes as long as there exist waveform coherence superior to other unrelated signals and noise. The analysis of 6 months of data using phase auto-correlation and cross-correlation resulted in the observation of a progressive medium change after the major recorded event. The progressive medium change is likely related to the swarm activity through opening new path ways for pore fluid diffusion. We further observed for the auto-correlations a lag time frequency-dependent change which likely indicates that the medium change is localized in depth. As expected, the main change is observed along the fault.

Application of an iterative least-squares waveform inversion of strong-motion and teleseismic records to the 1978 Tabas, Iran, earthquake

USGS Publications Warehouse

Hartzell, S.; Mendoza, C.

1991-01-01

An iterative least-squares technique is used to simultaneously invert the strong-motion records and teleseismic P waveforms for the 1978 Tabas, Iran, earthquake to deduce the rupture history. The effects of using different data sets and different parametrizations of the problem (linear versus nonlinear) are considered. A consensus of all the inversion runs indicates a complex, multiple source for the Tabas earthquake, with four main source regions over a fault length of 90 km and an average rupture velocity of 2.5 km/sec. -from Authors

Evaluation of Site Amplification Functions For Generalized Soil Types Using Earthquake Records and Spectral Models

NASA Astrophysics Data System (ADS)

Sokolov, V.; Loh, C. H.; Wen, K. L.

When evaluating the local site influence on seismic ground motion, in certain cases (e.g. building codes provisions) it is sufficient to describe the variety of soil condi- tions by a few number of generalized site classes. The site classification system that is widely used at present is based on on the properties of top 30 m of soil column, dis- regarding the characteristics of the deeper geology. Six site categories are defined on the basis of averaged shear waves velocity, namely: A - hard rock; B - rock; C - very dense or stiff soil; D - stiff soil; E - soft soil; F - soils requiring special studies. The generalized site amplification curves were developed for several site classes in west- ern US (Boore and Joyner, 1997) and Greece (Klimis et al., 1999) using available geotechnical data from near-surface boreholes. We propose to evaluate the amplifica- tion functions as the ratios between the spectra of real earthquakes recordings and the spectra modeled for "very hard rock" (VHR) conditions. The VHR spectra (regional source scaling and attenuation models) are constructed on the basis of ground motion records. The approach allows, on the one hand, to analyze all obtained records. On the other hand, it is possible to test applicability of the used spectral model. Moreover, the uncertainty of site response may be evaluated and described in terms of random variable characteristics to be considered in seismic hazard analysis. The results of the approach application are demonstrated for the case of Taiwan region. The char- acteristics of site amplification functions (mean values and standard deviation) were determined and analyzed in frequency range of 0.2-13 Hz for site classes B and C us- ing recordings of the 1999 Chi-Chi, Taiwan, earthquake (M=7.6), strong aftershocks (M=6.8), and several earthquakes (M < 6.5) occurred in the region in 1995-1998. When comparing the empirical amplification function resulting from the Taiwan data with that proposed for western US

Late Holocene megathrust earthquakes in south central Chile

NASA Astrophysics Data System (ADS)

Garrett, Ed; Shennan, Ian; Gulliver, Pauline; Woodroffe, Sarah

2013-04-01

A lack of comprehensive understanding of the seismic hazards associated with a subduction zone can lead to inadequate anticipation of earthquake and tsunami magnitudes. Four hundred and fifty years of Chilean historical documents record the effects of numerous great earthquakes; however, with recurrence intervals between the largest megathrust earthquakes approaching 300 years, seismic hazard assessment requires longer chronologies. This research seeks to verify and extend historical records in south central Chile using a relative-sea level approach to palaeoseismology. Our quantitative, diatom-based approaches to relative sea-level reconstruction are successful in reconstructing the magnitude of coseismic deformation during recent, well documented Chilean earthquakes. The few disparities between my estimates and independent data highlight the possibility of shaking-induced sediment consolidation in tidal marshes. Following this encouraging confirmation of the approach, we quantify land-level changes in longer sedimentary records from the centre of the rupture zone of the 1960 Valdivia earthquake. Here, laterally extensive marsh soils abruptly overlain by low intertidal sediments attest to the occurrence of four megathrust earthquakes. Sites preserve evidence of the 1960 and 1575 earthquakes and we constrain the timing of two predecessors to 1270 to 1410 and 1050 to 1200. The sediments and biostratigraphy lack evidence for the historically documented 1737 and 1837 earthquakes.

Detection of Induced Seismicity Due to Oil and Gas Extraction in the Northern Gulf of Mexico, USA

NASA Astrophysics Data System (ADS)

Fadugba, O. I.; Ebel, J.

2014-12-01

Drilling operations and extraction of oil and gas (O&G) may lead to subsurface slumping or compression of sediments due to reduced vertical principal stress which may lead to small earthquakes at the drilling site. O&G extraction is common in the northern Gulf of Mexico (NGM) and only thirty-five earthquakes of magnitudes between 2.3 and 6.0 have been recorded in the area from 1974 to the present. The purpose of this research is to detect more earthquakes using stacks of seismic data from the EarthScope Transportable USArray (TA) from 2011 to 2013, and determine the spatiotemporal relationship between the detected earthquakes and O&G extraction. TA waveform records were retrieved from IRIS database and a narrow bandpass filter of 1 - 2 Hz was applied to remove background and high frequency noises and focus on the low energy part of the signal. The seismic record at all stations was plotted vertically with respect to distance from the Gulf. An Automatic Gain Control (AGC) using Root Mean Square was applied to boost the signals at farther stations. More than 1500 events have been detected, including teleseisms and local blasts from the area, especially from the three Walter Minerals coal mines in Alabama. No offshore earthquakes have been detected in the data, although data processing is still ongoing. Therefore, any earthquake activity, if present, associated with the offshore oil and gas production must be at a magnitude below the detection threshold of the algorithm.

Earthquakes in South Carolina and Vicinity 1698-2009

USGS Publications Warehouse

Dart, Richard L.; Talwani, Pradeep; Stevenson, Donald

2010-01-01

This map summarizes more than 300 years of South Carolina earthquake history. It is one in a series of three similar State earthquake history maps. The current map and the previous two for Virginia and Ohio are accessible at http://pubs.usgs.gov/of/2006/1017/ and http://pubs.usgs.gov/of/2008/1221/. All three State earthquake maps were collaborative efforts between the U.S. Geological Survey and respective State agencies. Work on the South Carolina map was done in collaboration with the Department of Geological Sciences, University of South Carolina. As with the two previous maps, the history of South Carolina earthquakes was derived from letters, journals, diaries, newspaper accounts, academic journal articles, and, beginning in the early 20th century, instrumental recordings (seismograms). All historical (preinstrumental) earthquakes that were large enough to be felt have been located based on felt reports. Some of these events caused damage to buildings and their contents. The more recent widespread use of seismographs has allowed many smaller earthquakes, previously undetected, to be recorded and accurately located. The seismicity map shows historically located and instrumentally recorded earthquakes in and near South Carolina

Time-lapse changes in velocity and anisotropy in Japan's near surface after the 2011 Tohoku earthquake

NASA Astrophysics Data System (ADS)

Snieder, R.; Nakata, N.

2012-12-01

A strong-motion recording network, KiK-net, helps us to monitor temporal changes in the near surface in Japan. Each KiK-net station has two seismometers at the free surface and in a borehole a few hundred meters deep, and we can retrieve a traveling wave from the borehole receiver to the surface receiver by applying deconvolution based seismic interferometry. KiK-net recorded the 2011 Tohoku earthquake, which is one of the largest earthquakes in recent history, and seismicity around the time of the main shock. Using records of these seismicity and computing mean values of near-surface shear-wave velocities in the periods of January 1--March 10 and March 12--May 26 in 2011, we detect about a 5% reduction in the velocity after the Tohoku earthquake. The area of the velocity reduction is about 1,200 km wide, which is much wider than earlier studies reporting velocity reductions after larger earthquakes. The reduction partly recovers with time. We can also estimate the azimuthal anisotropy by detecting shear-wave splitting after applying seismic interferometry. Estimating mean values over the same periods as the velocity, we find the strength of anisotropy increased in most parts of northeastern Japan, but fast shear-wave polarization directions in the near surface did not significantly change. The changes in anisotropy and velocity are generally correlated, especially in the northeastern Honshu (the main island in Japan).

Earthquake Source Parameters Inferred from T-Wave Observations

NASA Astrophysics Data System (ADS)

Perrot, J.; Dziak, R.; Lau, T. A.; Matsumoto, H.; Goslin, J.

2004-12-01

The seismicity of the North Atlantic Ocean has been recorded by two networks of autonomous hydrophones moored within the SOFAR channel on the flanks of the Mid-Atlantic Ridge (MAR). In February 1999, a consortium of U.S. investigators (NSF and NOAA) deployed a 6-element hydrophone array for long-term monitoring of MAR seismicity between 15o-35oN south of the Azores. In May 2002, an international collaboration of French, Portuguese, and U.S. researchers deployed a 6-element hydrophone array north of the Azores Plateau from 40o-50oN. The northern network (referred to as SIRENA) was recovered in September 2003. The low attenuation properties of the SOFAR channel for earthquake T-wave propagation results in a detection threshold reduction from a magnitude completeness level (Mc) of ˜ 4.7 for MAR events recorded by the land-based seismic networks to Mc=3.0 using hydrophone arrays. Detailed focal depth and mechanism information, however, remain elusive due to the complexities of seismo-acoustic propagation paths. Nonetheless, recent analyses (Dziak, 2001; Park and Odom, 2001) indicate fault parameter information is contained within the T-wave signal packet. We investigate this relationship further by comparing an earthquake's T-wave duration and acoustic energy to seismic magnitude (NEIC) and radiation pattern (for events M>5) from the Harvard moment-tensor catalog. First results show earthquake energy is well represented by the acoustic energy of the T-waves, however T-wave codas are significantly influenced by acoustic propagation effects and do not allow a direct determination of the seismic magnitude of the earthquakes. Second, there appears to be a correlation between T-wave acoustic energy, azimuth from earthquake source to the hydrophone, and the radiation pattern of the earthquake's SH waves. These preliminary results indicate there is a relationship between the T-wave observations and earthquake source parameters, allowing for additional insights into T

2015 Volcanic Tsunami Earthquake near Torishima Island: Array analysis of ocean bottom pressure gauge records

NASA Astrophysics Data System (ADS)

Fukao, Y.; Sugioka, H.; Ito, A.; Shiobara, H.; Sandanbata, O.; Watada, S.; Satake, K.

2016-12-01

An array of ocean bottom pressure gauges was deployed off east of Aogashima island of the Izu-Bonin arc from May 2014 to May 2015. The array consists of 10 ocean bottom pressure gauges using ParoScientific quartz resonators which can measure absolute water pressure at 7000m depth with nano-resolution. The array configures equilateral triangles with minimum and maximum lengths of 10 and 30km. This array recorded seismic and tsunami waves from the CLVD-type earthquake (M5.7) of May 02, 2015, that occurred near Torishima Island 100 km distant from the array. Comparison with records of ordinary thrust earthquakes with similar magnitudes at similar distances indicates that this event generated anomalously large tsunamis relative to seismic waves. We made an array analysis for the phase speed, propagating azimuth and travel time of tsunami wave in a frequency range 1-10 mHz, where the dispersion effect is significant. The results show excellent agreements with the frequency-dependent ray-tracing calculations. The tsunami trace apparently starts with positive onset (pressure increase) and reaches a maximum amplitude of about 200Pa (≈2cm in tsunami height). A closer inspection, however, shows a preceding negative small pulse (Fig. 1), suggesting that the seafloor deformation at the tsunami source consists of a central large uplift and a peripheral small depression. This mode of deformation is qualitatively consistent with a finite CLVD source uniformly shortened laterally and uniformly stretched vertically without volume change. The detection of weak initial motions is indebted to the array deployment of sensitive pressure gauges far away from coastal regions. The bandpass-filtered waveform is drastically different between the lower and higher frequency ranges. The waveform is single-peaked in the lower frequency range (<5 mHz) but is ringing in the higher frequency range (>5 mHz), corresponding to the tsunami spectrum that consists of the broad primary peak around 3.5 m

The Application of Speaker Recognition Techniques in the Detection of Tsunamigenic Earthquakes

NASA Astrophysics Data System (ADS)

Gorbatov, A.; O'Connell, J.; Paliwal, K.

2015-12-01

Tsunami warning procedures adopted by national tsunami warning centres largely rely on the classical approach of earthquake location, magnitude determination, and the consequent modelling of tsunami waves. Although this approach is based on known physics theories of earthquake and tsunami generation processes, this may be the main shortcoming due to the need to satisfy minimum seismic data requirement to estimate those physical parameters. At least four seismic stations are necessary to locate the earthquake and a minimum of approximately 10 minutes of seismic waveform observation to reliably estimate the magnitude of a large earthquake similar to the 2004 Indian Ocean Tsunami Earthquake of M9.2. Consequently the total time to tsunami warning could be more than half an hour. In attempt to reduce the time of tsunami alert a new approach is proposed based on the classification of tsunamigenic and non tsunamigenic earthquakes using speaker recognition techniques. A Tsunamigenic Dataset (TGDS) was compiled to promote the development of machine learning techniques for application to seismic trace analysis and, in particular, tsunamigenic event detection, and compare them to existing seismological methods. The TGDS contains 227 off shore events (87 tsunamigenic and 140 non-tsunamigenic earthquakes with M≥6) from Jan 2000 to Dec 2011, inclusive. A Support Vector Machine classifier using a radial-basis function kernel was applied to spectral features derived from 400 sec frames of 3-comp. 1-Hz broadband seismometer data. Ten-fold cross-validation was used during training to choose classifier parameters. Voting was applied to the classifier predictions provided from each station to form an overall prediction for an event. The F1 score (harmonic mean of precision and recall) was chosen to rate each classifier as it provides a compromise between type-I and type-II errors, and due to the imbalance between the representative number of events in the tsunamigenic and non

Megathrust Earthquake Swarms Contemporaneous to Slow Slip and Non-Volcanic Tremor in Southern Mexico, Detected and Analyzed through a Template Matching Approach

NASA Astrophysics Data System (ADS)

Holtkamp, S.; Brudzinski, M. R.; Cabral-Cano, E.; Arciniega-Ceballos, A.

2012-12-01

An outstanding question in geophysics is the degree to which the newly discovered types of slow fault slip are related to their destructive cousin - the earthquake. Here, we utilize a local network along the Oaxacan segment of the Middle American subduction zone to investigate the potential relationship between slow slip, non-volcanic tremor (NVT), and earthquakes along the subduction megathrust. We have developed a multi-station "template matching" waveform cross correlation technique which is able to detect and locate events several orders of magnitude smaller than would be possible using more traditional techniques. Also, our template matching procedure is capable of consistently locate events which occur during periods of increased background activity (e.g., during productive NVT, loud cultural noise, or after larger earthquakes) because the multi-station detector is finely tuned to events with similar hypocentral location and focal mechanism. The local network in the Oaxaca region allows us to focus on documented megathrust earthquake swarms, which we focus on because slow slip is hypothesized to be the cause for earthquake swarms in some tectonic environments. We identify a productive earthquake swarm in July 2006 (~600 similar earthquakes detected), which occurred during a week-long episode of productive tremor and slow slip. Families of events in this sequence were also active during larger and longer slow slip events, which provides a potential link between slow slip in the transition zone and earthquakes at the downdip end of the seismogenic portion of the megathrust. Because template matching techniques only detect similar signals, detected waveforms can be stacked together to produce higher signal to noise ratios or cross correlated against each other to produce precise relative phase arrival times. We are using the refined signals to look for evidence of expansion or propagation of hypocenters during these earthquake swarms, which could be used as a

Combined wave propagation analysis of earthquake recordings from borehole and building sensors

NASA Astrophysics Data System (ADS)

Petrovic, B.; Parolai, S.; Dikmen, U.; Safak, E.; Moldobekov, B.; Orunbaev, S.

2015-12-01

In regions highly exposed to natural hazards, Early Warning Systems can play a central role in risk management and mitigation procedures. To improve at a relatively low cost the spatial resolution of regional earthquake early warning (EEW) systems, decentralized onsite EEW and building monitoring, a wireless sensing unit, the Self-Organizing Seismic Early Warning Information Network (SOSEWIN) was developed and further improved to include the multi-parameter acquisition. SOSEWINs working in continuous real time mode are currently tested on various sites. In Bishkek and Istanbul, an instrumented building is located close to a borehole equipped with downhole sensors. The joint data analysis of building and borehole earthquake recordings allows the study of the behavior of the building, characteristics of the soil, and soil-structure interactions. The interferometric approach applied to recordings of the building response is particularly suitable to characterize the wave propagation inside a building, including the propagation velocity of shear waves and attenuation. Applied to borehole sensors, it gives insights into velocity changes in different layers, reflections and mode conversion, and allows the estimation of the quality factor Qs. We used combined building and borehole data from the two test sites: 1) to estimate the characteristics of wave propagation through the building to the soil and back, and 2) to obtain an empirical insight into soil-structure interactions. The two test sites represent two different building and soil types, and soil structure impedance contrasts. The wave propagation through the soil to the building and back is investigated by the joint interferometric approach. The propagation of up and down-going waves through the building and soil is clearly imaged and the reflection of P and S waves from the earth surface and the top of the building identified. An estimate of the reflected and transmitted energy amounts is given, too.

A smartphone application for earthquakes that matter!

NASA Astrophysics Data System (ADS)

Bossu, Rémy; Etivant, Caroline; Roussel, Fréderic; Mazet-Roux, Gilles; Steed, Robert

2014-05-01

level of shaking intensity with empirical models of fatality losses calibrated on past earthquakes in each country. Non-seismic detections and macroseismic questionnaires collected online are combined to identify as many as possible of the felt earthquakes regardless their magnitude. Non seismic detections include Twitter earthquake detections, developed by the US Geological Survey, where the number of tweets containing the keyword "earthquake" is monitored in real time and flashsourcing, developed by the EMSC, which detect traffic surges on its rapid earthquake information website caused by the natural convergence of eyewitnesses who rush to the Internet to investigate the cause of the shaking that they have just felt. All together, we estimate that the number of detected felt earthquakes is around 1 000 per year, compared with the 35 000 earthquakes annually reported by the EMSC! Felt events are already the subject of the web page "Latest significant earthquakes" on EMSC website (http://www.emsc-csem.org/Earthquake/significant_earthquakes.php) and of a dedicated Twitter service @LastQuake. We will present the identification process of the earthquakes that matter, the smartphone application itself (to be released in May) and its future evolutions.

Scaling of seismic memory with earthquake size

NASA Astrophysics Data System (ADS)

Zheng, Zeyu; Yamasaki, Kazuko; Tenenbaum, Joel; Podobnik, Boris; Tamura, Yoshiyasu; Stanley, H. Eugene

2012-07-01

It has been observed that discrete earthquake events possess memory, i.e., that events occurring in a particular location are dependent on the history of that location. We conduct an analysis to see whether continuous real-time data also display a similar memory and, if so, whether such autocorrelations depend on the size of earthquakes within close spatiotemporal proximity. We analyze the seismic wave form database recorded by 64 stations in Japan, including the 2011 “Great East Japan Earthquake,” one of the five most powerful earthquakes ever recorded, which resulted in a tsunami and devastating nuclear accidents. We explore the question of seismic memory through use of mean conditional intervals and detrended fluctuation analysis (DFA). We find that the wave form sign series show power-law anticorrelations while the interval series show power-law correlations. We find size dependence in earthquake autocorrelations: as the earthquake size increases, both of these correlation behaviors strengthen. We also find that the DFA scaling exponent α has no dependence on the earthquake hypocenter depth or epicentral distance.

Continuous permeability measurements record healing inside the Wenchuan earthquake fault zone.

PubMed

Xue, Lian; Li, Hai-Bing; Brodsky, Emily E; Xu, Zhi-Qing; Kano, Yasuyuki; Wang, Huan; Mori, James J; Si, Jia-Liang; Pei, Jun-Ling; Zhang, Wei; Yang, Guang; Sun, Zhi-Ming; Huang, Yao

2013-06-28

Permeability controls fluid flow in fault zones and is a proxy for rock damage after an earthquake. We used the tidal response of water level in a deep borehole to track permeability for 18 months in the damage zone of the causative fault of the 2008 moment magnitude 7.9 Wenchuan earthquake. The unusually high measured hydraulic diffusivity of 2.4 × 10(-2) square meters per second implies a major role for water circulation in the fault zone. For most of the observation period, the permeability decreased rapidly as the fault healed. The trend was interrupted by abrupt permeability increases attributable to shaking from remote earthquakes. These direct measurements of the fault zone reveal a process of punctuated recovery as healing and damage interact in the aftermath of a major earthquake.

Upper-plate splay fault earthquakes along the Arakan subduction belt recorded by uplifted coral microatolls on northern Ramree Island, western Myanmar (Burma)

NASA Astrophysics Data System (ADS)

Shyu, J. Bruce H.; Wang, Chung-Che; Wang, Yu; Shen, Chuan-Chou; Chiang, Hong-Wei; Liu, Sze-Chieh; Min, Soe; Aung, Lin Thu; Than, Oo; Tun, Soe Thura

2018-02-01

Upper-plate structures that splay out from the megathrusts are common features along major convergent plate boundaries. However, their earthquake and tsunami hazard potentials have not yet received significant attention. In this study, we identified at least one earthquake event that may have been produced by an upper-plate splay fault offshore western Myanmar, based on U-Th ages of uplifted coral microatolls. This event is likely an earthquake that was documented historically in C.E. 1848, with an estimated magnitude between 6.8 and 7.2 based on regional structural characteristics. Such magnitude is consistent with the observed co-seismic uplift amount of ∼0.5 m. Although these events are smaller in magnitude than events produced by megathrusts, they may produce higher earthquake and tsunami hazards for local coastal communities due to their proximity. Our results also indicate that earthquake events with co-seismic uplift along the coast may not necessarily produce a flight of marine terraces. Therefore, using only records of uplifted marine terraces as megathrust earthquake proxies may overlook the importance of upper-plate splay fault ruptures, and underestimate the overall earthquake frequency for future seismic and tsunami hazards along major subduction zones of the world.

Understanding earthquake from the granular physics point of view — Causes of earthquake, earthquake precursors and predictions

NASA Astrophysics Data System (ADS)

Lu, Kunquan; Hou, Meiying; Jiang, Zehui; Wang, Qiang; Sun, Gang; Liu, Jixing

2018-03-01

We treat the earth crust and mantle as large scale discrete matters based on the principles of granular physics and existing experimental observations. Main outcomes are: A granular model of the structure and movement of the earth crust and mantle is established. The formation mechanism of the tectonic forces, which causes the earthquake, and a model of propagation for precursory information are proposed. Properties of the seismic precursory information and its relevance with the earthquake occurrence are illustrated, and principle of ways to detect the effective seismic precursor is elaborated. The mechanism of deep-focus earthquake is also explained by the jamming-unjamming transition of the granular flow. Some earthquake phenomena which were previously difficult to understand are explained, and the predictability of the earthquake is discussed. Due to the discrete nature of the earth crust and mantle, the continuum theory no longer applies during the quasi-static seismological process. In this paper, based on the principles of granular physics, we study the causes of earthquakes, earthquake precursors and predictions, and a new understanding, different from the traditional seismological viewpoint, is obtained.

Migrating slow slip detected by slow and repeating earthquakes along the Nankai trough, Japan

NASA Astrophysics Data System (ADS)

Uchida, N.; Obara, K.; Takagi, R.; Asano, Y.

2017-12-01

In the western part of the Nankai trough region, successive occurrences of deep non-volcanic tremors and shallow very low frequency earthquakes (VLFEs) associated with long-term slow slip events (SSEs) are reported in 2003 and 2010. To understand the link between the two seismic slow earthquakes, we identify small repeating earthquake in and around the region from the waveform similarity of earthquakes observed by NIED Hi-net. The result shows the repeaters are located in 15-30 km depth that is in between the depth range of the shallow VLFEs (depth <=15 km) and deep SSEs (depth>= 25km). They are also located outside of the source area of the 1946 Mw8.3 Nankai earthquake, consistent with the hypothesis that repeaters occur due to stress concentration to a locked patch by aseismic slip (creep) in the surrounding area. The long-term trend of aseismic slip estimated from the repeaters shows that the slip rate were faster during 2-3 years period before the 2003 and 2010 episodes. We also found short-term (days to month) accelerations of aseismic slip during the episode of 2010 that migrated toward north. The migration detected from repeaters follows shallow migration of VLFEs and precedes the deep migration of tremors. Therefore we consider that during the period of the long-term SSE of 3 years period, short-term slow slip migrated about 300 km length in 1 month from shallower and south part to deeper and north part of the plate boundary near the edge of the slip area of the Nankai earthquake. Such long-distance migration probably related to large-scale locking of plate boundary that is responsible to the Nankai earthquake and the interseismic stress concentration to the locked area.

Earthquake and tsunami forecasts: Relation of slow slip events to subsequent earthquake rupture

PubMed Central

Dixon, Timothy H.; Jiang, Yan; Malservisi, Rocco; McCaffrey, Robert; Voss, Nicholas; Protti, Marino; Gonzalez, Victor

2014-01-01

The 5 September 2012 Mw 7.6 earthquake on the Costa Rica subduction plate boundary followed a 62-y interseismic period. High-precision GPS recorded numerous slow slip events (SSEs) in the decade leading up to the earthquake, both up-dip and down-dip of seismic rupture. Deeper SSEs were larger than shallower ones and, if characteristic of the interseismic period, release most locking down-dip of the earthquake, limiting down-dip rupture and earthquake magnitude. Shallower SSEs were smaller, accounting for some but not all interseismic locking. One SSE occurred several months before the earthquake, but changes in Mohr–Coulomb failure stress were probably too small to trigger the earthquake. Because many SSEs have occurred without subsequent rupture, their individual predictive value is limited, but taken together they released a significant amount of accumulated interseismic strain before the earthquake, effectively defining the area of subsequent seismic rupture (rupture did not occur where slow slip was common). Because earthquake magnitude depends on rupture area, this has important implications for earthquake hazard assessment. Specifically, if this behavior is representative of future earthquake cycles and other subduction zones, it implies that monitoring SSEs, including shallow up-dip events that lie offshore, could lead to accurate forecasts of earthquake magnitude and tsunami potential. PMID:25404327

Earthquake and tsunami forecasts: relation of slow slip events to subsequent earthquake rupture.

PubMed

Dixon, Timothy H; Jiang, Yan; Malservisi, Rocco; McCaffrey, Robert; Voss, Nicholas; Protti, Marino; Gonzalez, Victor

2014-12-02

The 5 September 2012 M(w) 7.6 earthquake on the Costa Rica subduction plate boundary followed a 62-y interseismic period. High-precision GPS recorded numerous slow slip events (SSEs) in the decade leading up to the earthquake, both up-dip and down-dip of seismic rupture. Deeper SSEs were larger than shallower ones and, if characteristic of the interseismic period, release most locking down-dip of the earthquake, limiting down-dip rupture and earthquake magnitude. Shallower SSEs were smaller, accounting for some but not all interseismic locking. One SSE occurred several months before the earthquake, but changes in Mohr-Coulomb failure stress were probably too small to trigger the earthquake. Because many SSEs have occurred without subsequent rupture, their individual predictive value is limited, but taken together they released a significant amount of accumulated interseismic strain before the earthquake, effectively defining the area of subsequent seismic rupture (rupture did not occur where slow slip was common). Because earthquake magnitude depends on rupture area, this has important implications for earthquake hazard assessment. Specifically, if this behavior is representative of future earthquake cycles and other subduction zones, it implies that monitoring SSEs, including shallow up-dip events that lie offshore, could lead to accurate forecasts of earthquake magnitude and tsunami potential.

Awareness and understanding of earthquake hazards at school

NASA Astrophysics Data System (ADS)

Saraò, Angela; Peruzza, Laura; Barnaba, Carla; Bragato, Pier Luigi

2014-05-01

Schools have a fundamental role in broadening the understanding of natural hazard and risks and in building the awareness in the community. Recent earthquakes in Italy and worldwide, have clearly demonstrated that the poor perception of seismic hazards diminishes the effectiveness of mitigation countermeasures. Since years the Seismology's department of OGS is involved in education projects and public activities to raise awareness about earthquakes. Working together with teachers we aim at developing age-appropriate curricula to improve the student's knowledge about earthquakes, seismic safety, and seismic risk reduction. Some examples of education activities we performed during the last years are here presented. We show our experience with the primary and intermediate schools where, through hands-on activities, we explain the earthquake phenomenon and its effects to kids, but we illustrate also some teaching interventions for high school students. During the past years we lectured classes, we led laboratory and field activities, and we organized summer stages for selected students. In the current year we are leading a project aimed at training high school students on seismic safety through a multidisciplinary approach that involves seismologists, engineers and experts of safety procedures. To combine the objective of dissemination of earthquake culture, also through the knowledge of the past seismicity, with that of a safety culture, we use innovative educational techniques and multimedia resources. Students and teachers, under the guidance of an expert seismologist, organize a combination of hands-on activities for understanding earthquakes in the lab through cheap tools and instrumentations At selected schools we provided the low cost seismometers of the QuakeCatcher network (http://qcn.stanford.edu) for recording earthquakes, and we trained teachers to use such instruments in the lab and to analyze recorded data. Within the same project we are going to train

Anomalous soil radon fluctuations - signal of earthquakes in Nepal and eastern India regions

NASA Astrophysics Data System (ADS)

Deb, Argha; Gazi, Mahasin; Barman, Chiranjib

2016-12-01

The present paper deals with pre-seismic soil radon-222 recorded at two different locations 200 m apart, at Jadavpur University main campus, Kolkata, India. Solid state nuclear track detector method is used for detection of the radioactive radon gas. Two simultaneous 4-month long time series data have been analysed. Anomalous fluctuations in the radon datasets have been observed prior to recent earthquakes in Nepal and eastern India during the monitoring period, mainly, the massive 25th April 7.8 M Nepal earthquake. The simultaneous measurements assist in identifying seismogenic radon precursor efficiently.

Recorded earthquake responses from the integrated seismic monitoring network of the Atwood Building, Anchorage, Alaska

USGS Publications Warehouse

Celebi, M.

2006-01-01

An integrated seismic monitoring system with a total of 53 channels of accelerometers is now operating in and at the nearby free-field site of the 20-story steel-framed Atwood Building in highly seismic Anchorage, Alaska. The building has a single-story basement and a reinforced concrete foundation without piles. The monitoring system comprises a 32-channel structural array and a 21-channel site array. Accelerometers are deployed on 10 levels of the building to assess translational, torsional, and rocking motions, interstory drift (displacement) between selected pairs of adjacent floors, and average drift between floors. The site array, located approximately a city block from the building, comprises seven triaxial accelerometers, one at the surface and six in boreholes ranging in depths from 15 to 200 feet (???5-60 meters). The arrays have already recorded low-amplitude shaking responses of the building and the site caused by numerous earthquakes at distances ranging from tens to a couple of hundred kilometers. Data from an earthquake that occurred 186 km away traces the propagation of waves from the deepest borehole to the roof of the building in approximately 0.5 seconds. Fundamental structural frequencies [0.58 Hz (NS) and 0.47 Hz (EW)], low damping percentages (2-4%), mode coupling, and beating effects are identified. The fundamental site frequency at approximately 1.5 Hz is close to the second modal frequencies (1.83 Hz NS and 1.43 EW) of the building, which may cause resonance of the building. Additional earthquakes prove repeatability of these characteristics; however, stronger shaking may alter these conclusions. ?? 2006, Earthquake Engineering Research Institute.

Implosion, earthquake, and explosion recordings from the 2000 Seattle Kingdome Seismic Hazards Investigation of Puget Sound (SHIPS), Washington

USGS Publications Warehouse

Brocher, Thomas M.; Pratt, Thomas L.; Weaver, Craig S.; Snelson, Catherine M.; Frankel, Arthur D.

2002-01-01

This report describes seismic data obtained in Seattle, Washington, March 24-28, 2000, during a Seismic Hazards Investigation of Puget Sound (SHIPS). The seismic recordings obtained by this SHIPS experiment, nicknamed Kingdome SHIPS, were designed to (1) measure site responses throughout Seattle and to (2) help define the location of the Seattle fault. During Kingdome SHIPS, we recorded the Kingdome implosion, four 150-lb (68-kg) shots, and a Mw = 7.6 teleseism using a dense network of seismographs deployed throughout Seattle. The seismographs were deployed at a nominal spacing of 1 km in a hexagonal grid extending from Green Lake in the north to Boeing Field in the south. The Seattle Kingdome was a domed sports stadium located in downtown Seattle near the Seattle fault. The Seattle Kingdome was imploded (demolished) at 8:32 AM local time (16:32 UTC) on March 26 (JD 086), 2000. The seismic energy produced by implosion of the Kingdome was equivalent to a local earthquake magnitude of 2.3. Strong impacts produced by the implosion of the Kingdome generated seismic arrivals to frequencies as low as 0.1 Hz. Two shots located north of the Seattle fault, where the charges were detonated within the ground water column (Discovery and Magnuson Parks), were much more strongly coupled than were the two shots to the south of the Seattle fault, where the shots were detonated above the water table (Lincoln and Seward Parks). Thirty-eight RefTek stations, scattered throughout Seattle, recorded the Mw = 7.6 Japan Volcano Islands earthquake (22.4°N, 143.6°E, 104 km depth) of 28 March 2000 (JD 088). This teleseism produced useful signals for periods between 4 and 7 seconds. Only a few recordings of small magnitude local earthquakes were made, and these recordings are not presented. In this report, we describe the acquisition of these data, discuss the processing and merging of the data into common shot gathers, and illustrate the acquired data. We also describe the format and

Hiding earthquakes from scrupulous monitoring eyes of dense local seismic networks

NASA Astrophysics Data System (ADS)

Bogiatzis, P.; Ishii, M.; Kiser, E.

2012-12-01

Accurate and complete cataloguing of aftershocks is essential for a variety of purposes, including the estimation of the mainshock rupture area, the identification of seismic gaps, and seismic hazard assessment. However, immediately following large earthquakes, the seismograms recorded by local networks are noisy, with energy arriving from hundreds of aftershocks, in addition to different seismic phases interfering with one another. This causes deterioration in the performance of detection and location of earthquakes using conventional methods such as the S-P approach. This is demonstrated by results of back-projection analysis of teleseismic data showing that a significant number of events are undetected by the Japan Meteorological Agency, within the first twenty-four hours after the Mw9.0 Tohoku-oki, Japan earthquake. The spatial distribution of the hidden events is not arbitrary. Most of these earthquakes are located close to the trench, while some are located at the outer rise. Furthermore, there is a relatively sharp trench-parallel boundary separating the detected and undetected events. We investigate the cause of these hidden earthquakes using forward modeling. The calculation of raypaths for various source locations and takeoff angles with the "shooting" method suggests that this phenomenon is a consequence of the complexities associated with subducting slab. Laterally varying velocity structure defocuses the seismic energy from shallow earthquakes located near the trench and makes the observation of P and S arrivals difficult at stations situated on mainland Japan. Full waveform simulations confirm these results. Our forward calculations also show that the probability of detection is sensitive to the depth of the event. Shallower events near the trench are more difficult to detect than deeper earthquakes that are located inside the subducting plate for which the shadow-zone effect diminishes. The modeling effort is expanded to include three

Widespread Triggering of Earthquakes in the Central US by the 2011 M9.0 Tohoku-Oki Earthquake

NASA Astrophysics Data System (ADS)

Rubinstein, J. L.; Savage, H. M.

2011-12-01

The strong shaking of the 2011 M9.0 off-Tohoku earthquake triggered tectonic tremor and earthquakes in many locations around the world. We analyze broadband records from the USARRAY to identify triggered seismicity in more than 10 different locations in the Central United States. We identify triggered events in many states including: Kansas, Nebraska, Arkansas, Minnesota, and Iowa. The locally triggered earthquakes are obscured in broadband records by the Tohoku-Oki mainshock but can be revealed with high-pass filtering. With the exception of one location (central Arkansas), the triggered seismicity occurred in regions that are seismically quiet. The coincidence of this seismicity with the Tohoku-Oki event suggests that these earthquakes were triggered. The triggered seismicity in Arkansas occurred in a region where there has been an active swarm of seismicity since August 2010. There are two lines of evidence to indicate that the seismicity in Arkansas is triggered instead of part of the swarm: (1) we observe two earthquakes that initiate coincident with the arrival of shear wave and Love wave; (2) the seismicity rate increased dramatically following the Tohoku-Oki mainshock. Our observations of widespread earthquake triggering in regions thought to be seismically quiet remind us that earthquakes can occur in most any location. Studying additional teleseismic events has the potential to reveal regions with a propensity for earthquake triggering.

Hydroacoustic monitoring of seafloor earthquake and cryogenic sounds in the Bransfield Strait, Antarctica

NASA Astrophysics Data System (ADS)

Park, M.; Lee, W.; Dziak, R. P.; Matsumoto, H.; Bohnenstiehl, D. R.; Haxel, J. H.

2008-12-01

To record signals from submarine tectonic activity and ice-generated sound around the Antarctic Peninsula, we have operated an Autonomous Underwater Hydrophone (AUH) array from 2005 to 2007. The objectives of this experiment are to improve detection capability in the study area which is poorly covered by global seismic networks and to reveal characteristics of cryogenic sound which is hard to detect using low-latitude hydrophone array. NEIC has reported ~10-20 earthquakes per year in this region, while the efficiency of sound propagation in the ocean allows detection of greater than two orders of magnitude more earthquakes. A total of 5,160 earthquakes including 12 earthquake swarms are located during the deployment period. A total of 6 earthquake swarms (3,008) occurred in the western part of the Bransfield Strait (WBS), show an epicenter migration of 1-2 km/hr, exhibit a deficiency in high-frequency energy, and occurred near submarine volcanic centers along the back-arc rift axis. Cross-correlation analysis with ocean and solid earth tides indicates the WBS seismicity is modulated by tidal stress, where volcanic earthquake activity reflects variations in tidal forcing than do tectonic earthquakes. On-the-other hand, earthquake swarms from the eastern part of the BS (EBS) show features typical of tectonic earthquakes such as widely distributed epicenters with no clear spatio-temporal pattern and full-spectrum (broadband) signals. These results are consistent with previous crustal models indicating the WBS is undergoing volcanically dominated rifting, whereas rifting in the EBS is tectonically driven. A total of 5,929 ice-generated signals were also derived from the data and are the first detailed observation of various cryogenic phenomena in the region. These cryogenic signals exhibit unusual, tremor-like signals with a high-frequency fundamental (~40 Hz) and 5-6 overtones caused by iceberg resonance, as well as impulsive, short-duration "icequakes" caused by ice

Genetic algorithm for TEC seismo-ionospheric anomalies detection around the time of the Solomon (Mw = 8.0) earthquake of 06 February 2013

NASA Astrophysics Data System (ADS)

Akhoondzadeh, M.

2013-08-01

On 6 February 2013, at 12:12:27 local time (01:12:27 UTC) a seismic event registering Mw 8.0 struck the Solomon Islands, located at the boundaries of the Australian and Pacific tectonic plates. Time series prediction is an important and widely interesting topic in the research of earthquake precursors. This paper describes a new computational intelligence approach to detect the unusual variations of the total electron content (TEC) seismo-ionospheric anomalies induced by the powerful Solomon earthquake using genetic algorithm (GA). The GA detected a considerable number of anomalous occurrences on earthquake day and also 7 and 8 days prior to the earthquake in a period of high geomagnetic activities. In this study, also the detected TEC anomalies using the proposed method are compared to the results dealing with the observed TEC anomalies by applying the mean, median, wavelet, Kalman filter, ARIMA, neural network and support vector machine methods. The accordance in the final results of all eight methods is a convincing indication for the efficiency of the GA method. It indicates that GA can be an appropriate non-parametric tool for anomaly detection in a non linear time series showing the seismo-ionospheric precursors variations.

Dynamic strains for earthquake source characterization

USGS Publications Warehouse

Barbour, Andrew J.; Crowell, Brendan W

2017-01-01

Strainmeters measure elastodynamic deformation associated with earthquakes over a broad frequency band, with detection characteristics that complement traditional instrumentation, but they are commonly used to study slow transient deformation along active faults and at subduction zones, for example. Here, we analyze dynamic strains at Plate Boundary Observatory (PBO) borehole strainmeters (BSM) associated with 146 local and regional earthquakes from 2004–2014, with magnitudes from M 4.5 to 7.2. We find that peak values in seismic strain can be predicted from a general regression against distance and magnitude, with improvements in accuracy gained by accounting for biases associated with site–station effects and source–path effects, the latter exhibiting the strongest influence on the regression coefficients. To account for the influence of these biases in a general way, we include crustal‐type classifications from the CRUST1.0 global velocity model, which demonstrates that high‐frequency strain data from the PBO BSM network carry information on crustal structure and fault mechanics: earthquakes nucleating offshore on the Blanco fracture zone, for example, generate consistently lower dynamic strains than earthquakes around the Sierra Nevada microplate and in the Salton trough. Finally, we test our dynamic strain prediction equations on the 2011 M 9 Tohoku‐Oki earthquake, specifically continuous strain records derived from triangulation of 137 high‐rate Global Navigation Satellite System Earth Observation Network stations in Japan. Moment magnitudes inferred from these data and the strain model are in agreement when Global Positioning System subnetworks are unaffected by spatial aliasing.

Sedimentary Signatures of Submarine Earthquakes: Deciphering the Extent of Sediment Remobilization from the 2011 Tohoku Earthquake and Tsunami and 2010 Haiti Earthquake

NASA Astrophysics Data System (ADS)

McHugh, C. M.; Seeber, L.; Moernaut, J.; Strasser, M.; Kanamatsu, T.; Ikehara, K.; Bopp, R.; Mustaque, S.; Usami, K.; Schwestermann, T.; Kioka, A.; Moore, L. M.

2017-12-01

The 2004 Sumatra-Andaman Mw9.3 and the 2011 Tohoku (Japan) Mw9.0 earthquakes and tsunamis were huge geological events with major societal consequences. Both were along subduction boundaries and ruptured portions of these boundaries that had been deemed incapable of such events. Submarine strike-slip earthquakes, such as the 2010 Mw7.0 in Haiti, are smaller but may be closer to population centers and can be similarly catastrophic. Both classes of earthquakes remobilize sediment and leave distinct signatures in the geologic record by a wide range of processes that depends on both environment and earthquake characteristics. Understanding them has the potential of greatly expanding the record of past earthquakes, which is critical for geohazard analysis. Recent events offer precious ground truth about the earthquakes and short-lived radioisotopes offer invaluable tools to identify sediments they remobilized. In the 2011 Mw9 Japan earthquake they document the spatial extent of remobilized sediment from water depths of 626m in the forearc slope to trench depths of 8000m. Subbottom profiles, multibeam bathymetry and 40 piston cores collected by the R/V Natsushima and R/V Sonne expeditions to the Japan Trench document multiple turbidites and high-density flows. Core tops enriched in xs210Pb,137Cs and 134Cs reveal sediment deposited by the 2011 Tohoku earthquake and tsunami. The thickest deposits (2m) were documented on a mid-slope terrace and trench (4000-8000m). Sediment was deposited on some terraces (600-3000m), but shed from the steep forearc slope (3000-4000m). The 2010 Haiti mainshock ruptured along the southern flank of Canal du Sud and triggered multiple nearshore sediment failures, generated turbidity currents and stirred fine sediment into suspension throughout this basin. A tsunami was modeled to stem from both sediment failures and tectonics. Remobilized sediment was tracked with short-lived radioisotopes from the nearshore, slope, in fault basins including the

Building an 18 000-year-long paleo-earthquake record from detailed deep-sea turbidite characterisation in Poverty Bay, New Zealand

NASA Astrophysics Data System (ADS)

Pouderoux, H.; Lamarche, G.; Proust, J.-N.

2012-06-01

-triggered turbidites. Our results show that the progressive characterisation of a turbidite record from a single sedimentary system can provide a continuous paleo-earthquake history in regions of short historical record and incomplete onland paleo-earthquake evidences. The systematic description of each turbidite enables us to infer the triggering mechanism.

Object-Oriented Analysis of Satellite Images Using Artificial Neural Networks for Post-Earthquake Buildings Change Detection

NASA Astrophysics Data System (ADS)

Khodaverdi zahraee, N.; Rastiveis, H.

2017-09-01

Earthquake is one of the most divesting natural events that threaten human life during history. After the earthquake, having information about the damaged area, the amount and type of damage can be a great help in the relief and reconstruction for disaster managers. It is very important that these measures should be taken immediately after the earthquake because any negligence could be more criminal losses. The purpose of this paper is to propose and implement an automatic approach for mapping destructed buildings after an earthquake using pre- and post-event high resolution satellite images. In the proposed method after preprocessing, segmentation of both images is performed using multi-resolution segmentation technique. Then, the segmentation results are intersected with ArcGIS to obtain equal image objects on both images. After that, appropriate textural features, which make a better difference between changed or unchanged areas, are calculated for all the image objects. Finally, subtracting the extracted textural features from pre- and post-event images, obtained values are applied as an input feature vector in an artificial neural network for classifying the area into two classes of changed and unchanged areas. The proposed method was evaluated using WorldView2 satellite images, acquired before and after the 2010 Haiti earthquake. The reported overall accuracy of 93% proved the ability of the proposed method for post-earthquake buildings change detection.

Geophysical investigations of the Anna, Ohio earthquake zone. Annual progess report July 1979-June 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauk, F.J.; Henry, S.G.; Christensen, D.H.

The Anna, Ohio seismic array, converted to solar recharge power systems, has been in continuous operation. No local earthquakes above m sub b 1.5 have occurred. Near regional earthquakes from 1977 through 1980 supplemented with quarry blast recordings have been used to determine the regional travel time curves. Theoretical estimates of earthquake detection and location capabilities for m sub b 2.5, 2.0, and 1.5 earthquakes in the Anna, Ohio region are included to demonstrate the coverage effectiveness of the network. Teleseismic P-wave residuals as a function of azimuth are included to demonstrate the lower crustal velocity variation for the region.more » Finally, an exhaustive catalog of water and gas well data is included from which a regional depth to bedrock map has been produced.« less

The 2008 Wells, Nevada Earthquake Sequence: Application of Subspace Detection and Multiple Event Relocation Techniques

NASA Astrophysics Data System (ADS)

Nealy, J. L.; Benz, H.; Hayes, G. P.; Bergman, E.; Barnhart, W. D.

2016-12-01

On February 21, 2008 at 14:16:02 (UTC), Wells, Nevada experienced a Mw 6.0 earthquake, the largest earthquake in the state within the past 50 years. Here, we re-analyze in detail the spatiotemporal variations of the foreshock and aftershock sequence and compare the distribution of seismicity to a recent slip model based on inversion of InSAR observations. A catalog of earthquakes for the time period of February 1, 2008 through August 31, 2008 was derived from a combination of arrival time picks using a kurtosis detector (primarily P arrival times), subspace detector (primarily S arrival times), associating the combined pick dataset, and applying multiple event relocation techniques using the 19 closest USArray Transportable Array stations, permanent regional seismic monitoring stations in Nevada and Utah, and temporary stations deployed for an aftershock study. We were able to detect several thousand earthquakes in the months following the mainshock as well as several foreshocks in the days leading up to the event. We reviewed the picks for the largest 986 earthquakes and relocated them using the Hypocentroidal Decomposition (HD) method. The HD technique provides both relative locations for the individual earthquakes and an absolute location for the earthquake cluster, resulting in absolute locations of the events in the cluster having minimal bias from unknown Earth structure. A subset of these "calibrated" earthquake locations that spanned the duration of the sequence and had small uncertainties in location were used as prior constraints within a second relocation effort using the entire dataset and the Bayesloc approach. Accurate locations (to within 2 km) were obtained using Bayesloc for 1,952 of the 2,157 events associated over the seven-month period of the study. The final catalog of earthquake hypocenters indicates that the aftershocks extend for about 20 km along the strike of the ruptured fault. The aftershocks occur primarily updip and along the

Ground Motions Due to Earthquakes on Creeping Faults

NASA Astrophysics Data System (ADS)

Harris, R.; Abrahamson, N. A.

2014-12-01

We investigate the peak ground motions from the largest well-recorded earthquakes on creeping strike-slip faults in active-tectonic continental regions. Our goal is to evaluate if the strong ground motions from earthquakes on creeping faults are smaller than the strong ground motions from earthquakes on locked faults. Smaller ground motions might be expected from earthquakes on creeping faults if the fault sections that strongly radiate energy are surrounded by patches of fault that predominantly absorb energy. For our study we used the ground motion data available in the PEER NGA-West2 database, and the ground motion prediction equations that were developed from the PEER NGA-West2 dataset. We analyzed data for the eleven largest well-recorded creeping-fault earthquakes, that ranged in magnitude from M5.0-6.5. Our findings are that these earthquakes produced peak ground motions that are statistically indistinguishable from the peak ground motions produced by similar-magnitude earthquakes on locked faults. These findings may be implemented in earthquake hazard estimates for moderate-size earthquakes in creeping-fault regions. Further investigation is necessary to determine if this result will also apply to larger earthquakes on creeping faults. Please also see: Harris, R.A., and N.A. Abrahamson (2014), Strong ground motions generated by earthquakes on creeping faults, Geophysical Research Letters, vol. 41, doi:10.1002/2014GL060228.

Unusual geologic evidence of coeval seismic shaking and tsunamis shows variability in earthquake size and recurrence in the area of the giant 1960 Chile earthquake

USGS Publications Warehouse

Cisternas, M.; Garrett, E; Wesson, Robert L.; Dura, T.; Ely, L. L

2017-01-01

An uncommon coastal sedimentary record combines evidence for seismic shaking and coincident tsunami inundation since AD 1000 in the region of the largest earthquake recorded instrumentally: the giant 1960 southern Chile earthquake (Mw 9.5). The record reveals significant variability in the size and recurrence of megathrust earthquakes and ensuing tsunamis along this part of the Nazca-South American plate boundary. A 500-m long coastal outcrop on Isla Chiloé, midway along the 1960 rupture, provides continuous exposure of soil horizons buried locally by debris-flow diamicts and extensively by tsunami sand sheets. The diamicts flattened plants that yield geologically precise ages to correlate with well-dated evidence elsewhere. The 1960 event was preceded by three earthquakes that probably resembled it in their effects, in AD 898 - 1128, 1300 - 1398 and 1575, and by five relatively smaller intervening earthquakes. Earthquakes and tsunamis recurred exceptionally often between AD 1300 and 1575. Their average recurrence interval of 85 years only slightly exceeds the time already elapsed since 1960. This inference is of serious concern because no earthquake has been anticipated in the region so soon after the 1960 event, and current plate locking suggests that some segments of the boundary are already capable of producing large earthquakes. This long-term earthquake and tsunami history of one of the world's most seismically active subduction zones provides an example of variable rupture mode, in which earthquake size and recurrence interval vary from one earthquake to the next.

Triggered Seismicity in Utah from the November 3, 2002, Denali Fault Earthquake

NASA Astrophysics Data System (ADS)

Pankow, K. L.; Nava, S. J.; Pechmann, J. C.; Arabasz, W. J.

2002-12-01

Coincident with the arrival of the surface waves from the November 3, 2002, Mw 7.9 Denali Fault, Alaska earthquake (DFE), the University of Utah Seismograph Stations (UUSS) regional seismic network detected a marked increase in seismicity along the Intermountain Seismic Belt (ISB) in central and north-central Utah. The number of earthquakes per day in Utah located automatically by the UUSS's Earthworm system in the week following the DFE was approximately double the long-term average during the preceding nine months. From these preliminary data, the increased seismicity appears to be characterized by small magnitude events (M = 3.2) and concentrated in five distinct spatial clusters within the ISB between 38.75°and 42.0° N. The first of these earthquakes was an M 2.2 event located ~20 km east of Salt Lake City, Utah, which occurred during the arrival of the Love waves from the DFE. The increase in Utah earthquake activity at the time of the arrival of the surface waves from the DFE suggests that these surface waves triggered earthquakes in Utah at distances of more than 3,000 km from the source. We estimated the peak dynamic shear stress caused by these surface waves from measurements of their peak vector velocities at 43 recording sites: 37 strong-motion stations of the Advanced National Seismic System and six broadband stations. (The records from six other broadband instruments in the region of interest were clipped.) The estimated peak stresses ranged from 1.2 bars to 3.5 bars with a mean of 2.3 bars, and generally occurred during the arrival of Love waves of ~15 sec period. These peak dynamic shear stress estimates are comparable to those obtained from recordings of the 1992 Mw 7.3 Landers, California, earthquake in regions where the Landers earthquake triggered increased seismicity. We plan to present more complete analyses of UUSS seismic network data, further testing our hypothesis that the DFE remotely triggered seismicity in Utah. This hypothesis is

Fault failure with moderate earthquakes

USGS Publications Warehouse

Johnston, M.J.S.; Linde, A.T.; Gladwin, M.T.; Borcherdt, R.D.

1987-01-01

High resolution strain and tilt recordings were made in the near-field of, and prior to, the May 1983 Coalinga earthquake (ML = 6.7, ?? = 51 km), the August 4, 1985, Kettleman Hills earthquake (ML = 5.5, ?? = 34 km), the April 1984 Morgan Hill earthquake (ML = 6.1, ?? = 55 km), the November 1984 Round Valley earthquake (ML = 5.8, ?? = 54 km), the January 14, 1978, Izu, Japan earthquake (ML = 7.0, ?? = 28 km), and several other smaller magnitude earthquakes. These recordings were made with near-surface instruments (resolution 10-8), with borehole dilatometers (resolution 10-10) and a 3-component borehole strainmeter (resolution 10-9). While observed coseismic offsets are generally in good agreement with expectations from elastic dislocation theory, and while post-seismic deformation continued, in some cases, with a moment comparable to that of the main shock, preseismic strain or tilt perturbations from hours to seconds (or less) before the main shock are not apparent above the present resolution. Precursory slip for these events, if any occurred, must have had a moment less than a few percent of that of the main event. To the extent that these records reflect general fault behavior, the strong constraint on the size and amount of slip triggering major rupture makes prediction of the onset times and final magnitudes of the rupture zones a difficult task unless the instruments are fortuitously installed near the rupture initiation point. These data are best explained by an inhomogeneous failure model for which various areas of the fault plane have either different stress-slip constitutive laws or spatially varying constitutive parameters. Other work on seismic waveform analysis and synthetic waveforms indicates that the rupturing process is inhomogeneous and controlled by points of higher strength. These models indicate that rupture initiation occurs at smaller regions of higher strength which, when broken, allow runaway catastrophic failure. ?? 1987.

Hydrologic effects of the earthquake of March 27, 1964, outside Alaska, with sections on Hydroseismograms from the Nunn-Bush Shoe Co. well, Wisconsin, and Alaska earthquake effects on ground water in Iowa: Chapter C in The Alaska earthquakes, March 27, 1964: effects on hydrologic regimen

USGS Publications Warehouse

Vorhis, Robert C.; Rexin, Elmer E.; Coble, R.W.

1967-01-01

The Alaska earthquake of March 27, 1964, had widespread hydrologic effects throughout practically all of the United States. More than 1,450 water-level recorders, scattered throughout all the 50 States except Connecticut, Delaware, and Rhode Island, registered the earthquake. Half of the water-level records were obtained from ground-water observation wells and half at surface-water gaging stations. The earthquake is also known to have registered on water-level recorders on wells in Canada, England, Denmark, Belgium, Egypt, Israel, Libya, Philippine Islands, South-West Africa, South Africa, and Northern Territory of Australia. The Alaska earthquake is the first for which widespread surface-water effects are known. The effects were recorded at stations on flowing streams, rivers, reservoirs, lakes, and ponds. The 755 surface-water stations recording effects are spread through 38 States, but are most numerous in the south-central and southeastern States, especially in Florida and Louisiana. Most of the fluctuations recorded can be referred to more precisely as seismic seiches; however, a few stations recorded the quake as a minor change in stage. The largest recorded seiche outside Alaska was 1.83 feet on a reservoir in Michigan. The next largest was 1.45 feet on Lake Ouachita in Arkansas. The largest fluctuation in a well was 23 feet registered by a pressure recorder near Belle Fourche, S. Dak. Fluctuations of more than 10 feet were reported from wells in Alabama, Florida, Georgia, Illinois, Missouri, and Pennsylvania. A 3.40-foot fluctuation was recorded in a well in Puerto Rico. The Alaska earthquake was registered by about seven times as many water-level recorders as recorded the Hebgen Lake, Mont., earthquake of August 19, 1959.

Geophysical Anomalies and Earthquake Prediction

NASA Astrophysics Data System (ADS)

Jackson, D. D.

2008-12-01

Finding anomalies is easy. Predicting earthquakes convincingly from such anomalies is far from easy. Why? Why have so many beautiful geophysical abnormalities not led to successful prediction strategies? What is earthquake prediction? By my definition it is convincing information that an earthquake of specified size is temporarily much more likely than usual in a specific region for a specified time interval. We know a lot about normal earthquake behavior, including locations where earthquake rates are higher than elsewhere, with estimable rates and size distributions. We know that earthquakes have power law size distributions over large areas, that they cluster in time and space, and that aftershocks follow with power-law dependence on time. These relationships justify prudent protective measures and scientific investigation. Earthquake prediction would justify exceptional temporary measures well beyond those normal prudent actions. Convincing earthquake prediction would result from methods that have demonstrated many successes with few false alarms. Predicting earthquakes convincingly is difficult for several profound reasons. First, earthquakes start in tiny volumes at inaccessible depth. The power law size dependence means that tiny unobservable ones are frequent almost everywhere and occasionally grow to larger size. Thus prediction of important earthquakes is not about nucleation, but about identifying the conditions for growth. Second, earthquakes are complex. They derive their energy from stress, which is perniciously hard to estimate or model because it is nearly singular at the margins of cracks and faults. Physical properties vary from place to place, so the preparatory processes certainly vary as well. Thus establishing the needed track record for validation is very difficult, especially for large events with immense interval times in any one location. Third, the anomalies are generally complex as well. Electromagnetic anomalies in particular require

Impact of earthquakes on agriculture during the Roman-Byzantine period from pollen records of the Dead Sea laminated sediment

NASA Astrophysics Data System (ADS)

Leroy, Suzanne A. G.; Marco, Shmuel; Bookman, Revital; Miller, Charlotte S.

2010-03-01

The Dead Sea region holds the archives of a complex relationship between an ever-changing nature and ancient civilisations. Regional pollen diagrams show a Roman-Byzantine period standing out in the recent millennia by its wetter climate that allowed intensive arboriculture. During that period, the Dead Sea formed laminites that display mostly a seasonal character. A multidisciplinary study focused on two earthquakes, 31 BC and AD 363, recorded as seismites in the Ze'elim gully A unit III which has been well dated by radiocarbon in a previous study. The sampling of the sediment was done at an annual resolution starting from a few years before and finishing a decade after each earthquake. A clear drop in agricultural indicators (especially Olea and cereals) is shown. These pollen indicators mostly reflect human activities in the Judean Hills and coastal oases. Agriculture was disturbed in large part of the rift valley where earthquake damage affected irrigation and access to the fields. It took 4 to 5 yr to resume agriculture to previous conditions. Earthquakes must be seen as contributors to factors damaging societies. If combined with other factors such as climatic aridification, disease epidemics and political upheaval, they may lead to civilisation collapse.

2001 Bhuj, India, earthquake engineering seismoscope recordings and Eastern North America ground-motion attenuation relations

USGS Publications Warehouse

Cramer, C.H.; Kumar, A.

2003-01-01

Engineering seismoscope data collected at distances less than 300 km for the M 7.7 Bhuj, India, mainshock are compatible with ground-motion attenuation in eastern North America (ENA). The mainshock ground-motion data have been corrected to a common geological site condition using the factors of Joyner and Boore (2000) and a classification scheme of Quaternary or Tertiary sediments or rock. We then compare these data to ENA ground-motion attenuation relations. Despite uncertainties in recording method, geological site corrections, common tectonic setting, and the amount of regional seismic attenuation, the corrected Bhuj dataset agrees with the collective predictions by ENA ground-motion attenuation relations within a factor of 2. This level of agreement is within the dataset uncertainties and the normal variance for recorded earthquake ground motions.

Source models of M-7 class earthquakes in the rupture area of the 2011 Tohoku-Oki Earthquake by near-field tsunami modeling

NASA Astrophysics Data System (ADS)

Kubota, T.; Hino, R.; Inazu, D.; Saito, T.; Iinuma, T.; Suzuki, S.; Ito, Y.; Ohta, Y.; Suzuki, K.

2012-12-01

We estimated source models of small amplitude tsunami associated with M-7 class earthquakes in the rupture area of the 2011 Tohoku-Oki Earthquake using near-field records of tsunami recorded by ocean bottom pressure gauges (OBPs). The largest (Mw=7.3) foreshock of the Tohoku-Oki earthquake, occurred on 9 Mar., two days before the mainshock. Tsunami associated with the foreshock was clearly recorded by seven OBPs, as well as coseismic vertical deformation of the seafloor. Assuming a planer fault along the plate boundary as a source, the OBP records were inverted for slip distribution. As a result, the most of the coseismic slip was found to be concentrated in the area of about 40 x 40 km in size and located to the north-west of the epicenter, suggesting downdip rupture propagation. Seismic moment of our tsunami waveform inversion is 1.4 x 10^20 Nm, equivalent to Mw 7.3. On 2011 July 10th, an earthquake of Mw 7.0 occurred near the hypocenter of the mainshock. Its relatively deep focus and strike-slip focal mechanism indicate that this earthquake was an intraslab earthquake. The earthquake was associated with small amplitude tsunami. By using the OBP records, we estimated a model of the initial sea-surface height distribution. Our tsunami inversion showed that a pair of uplift/subsiding eyeballs was required to explain the observed tsunami waveform. The spatial pattern of the seafloor deformation is consistent with the oblique strike-slip solution obtained by the seismic data analyses. The location and strike of the hinge line separating the uplift and subsidence zones correspond well to the linear distribution of the aftershock determined by using local OBS data (Obana et al., 2012).

To what extent the repeating earthquakes repeated? - Analyses of 1982 and 2008 Ibaraki-ken-oki M7 class earthquakes using strong motion records -

NASA Astrophysics Data System (ADS)

Takiguchi, M.; Asano, K.; Iwata, T.

2010-12-01

Two M7 class subduction zone earthquakes have occurred in the Ibaraki-ken-oki region, northeast Japan, at 23:23 on July 23, 1982 JST (Mw7.0; 1982MS) and at 01:45 on May 8, 2008 JST (Mw6.8; 2008MS). It has been reported that, from the results of the teleseismic waveform inversion, the rupture of the asperity repeated (HERP, 2010). We estimated the source processes of these earthquakes in detail by analyzing the strong motion records and discussed how much the source characteristics of the two earthquakes repeated. First, we estimated the source model of 2008MS following the method of Miyake et al. (2003). The best-fit set of the model parameters was determined by a grid search using forward modeling of broad-band ground motions. A single 12.6 km × 12.6 km rectangular Strong Motion Generation Area (SMGA, Miyake et al., 2003) was estimated. The rupture of the SMGA of 2008MS (2008SMGA) started from the hypocenter and propagated mainly to northeast. Next, we estimated the source model of 1982MS. We compared the waveforms of 1982MS and 2008MS recorded at the same stations and found the initial rupture phase before the main rupture phase on the waveforms of 1982MS. The travel time analysis showed that the main rupture of the 1982MS started approximately 33 km west of the hypocenter at about 11s after the origin time. The main rupture starting point was located inside 2008SMGA, suggesting that the two SMGAs overlapped in part. The seismic moment ratio of 1982MS to 2008MS was approximately 1.6, and we also found the observed acceleration amplitude spectra of 1982MS were 1.5 times higher than those of 2008MS in the available frequency range. We performed the waveform modeling for 1982MS with a constraint of these ratios. A single rectangular SMGA (1982SMGA) was estimated for the main rupture, which had the same size and the same rupture propagation direction as those of 2008SMGA. However, the estimated stress drop or average slip amount of 1982SMGA was 1.5 times larger than

The great Lisbon earthquake and tsunami of 1755: lessons from the recent Sumatra earthquakes and possible link to Plato's Atlantis

NASA Astrophysics Data System (ADS)

Gutscher, M.-A.

2006-05-01

Great earthquakes and tsunami can have a tremendous societal impact. The Lisbon earthquake and tsunami of 1755 caused tens of thousands of deaths in Portugal, Spain and NW Morocco. Felt as far as Hamburg and the Azores islands, its magnitude is estimated to be 8.5 9. However, because of the complex tectonics in Southern Iberia, the fault that produced the earthquake has not yet been clearly identified. Recently acquired data from the Gulf of Cadiz area (tomography, seismic profiles, high-resolution bathymetry, sampled active mud volcanoes) provide strong evidence for an active east dipping subduction zone beneath Gibraltar. Eleven out of 12 of the strongest earthquakes (M>8.5) of the past 100 years occurred along subduction zone megathrusts (including the December 2004 and March 2005 Sumatra earthquakes). Thus, it appears likely that the 1755 earthquake and tsunami were generated in a similar fashion, along the shallow east-dipping subduction fault plane. This implies that the Cadiz subduction zone is locked (like the Cascadia and Nankai/Japan subduction zones), with great earthquakes occurring over long return periods. Indeed, the regional paleoseismic record (contained in deep-water turbidites and shallow lagoon deposits) suggests great earthquakes off South West Iberia every 1500 2000 years. Tsunami deposits indicate an earlier great earthquake struck SW Iberia around 200 BC, as noted by Roman records from Cadiz. A written record of even older events may also exist. According to Plato's dialogues The Critias and The Timaeus, Atlantis was destroyed by ‘strong earthquakes and floods … in a single day and night’ at a date given as 11,600 BP. A 1 m thick turbidite deposit, containing coarse grained sediments from underwater avalanches, has been dated at 12,000 BP and may correspond to the destructive earthquake and tsunami described by Plato. The effects on a paleo-island (Spartel) in the straits of Gibraltar would have been devastating, if inhabited, and may

Intermediate-Depth Subduction Earthquakes Recorded by Pseudotachylyte in Dry Eclogite-Facies Oceanic Lithosphere from the Alps

NASA Astrophysics Data System (ADS)

Scambelluri, M.; Pennacchioni, G.; Gilio, M.; Bestmann, M.

2016-12-01

While geophysical studies and laboratory experiments provide much information on subduction earthquakes, field studies identifying the rock types for earthquake development and the deep seismogenic environments are still scarce. To date, fluid overpressure and volume decrease during hydrous mineral breakdown the widely favoured trigger of subduction earthquakes in serpentinized lithospheric mantle and hydrated low-velocity layers atop slabs. Here we document up to 40 cm-thick pseudotachylyte (PST) in Alpine oceanic gabbro and peridotite (2-2.5 GPa-550-620°C), the analogue of a modern cold subducting oceanic lithosphere. These rocks mostly remained unaltered dry systems; only very minor domains (<1%) record partial hydration and static eclogitic metamorphism. Meta-peridotite shows high-pressure olivine + antigorite (garnet + zoisite + chlorite after mantle plagioclase); meta-gabbro develops omphacite + zoisite + talc + chloritoid + garnet. Abundant syn-eclogitic pseudotachylyte cut the dry gabbro-peridotite and the eclogitized domains. In meta-peridotite, PST shows olivine, orthopyroxene, spinel microliths and clasts of high-pressure olivine + antigorite and garnet + zoisite + chlorite aggregates. In metagabbro, microfaults in damage zones near PST cut brecciated igneous pyroxene cemented by omphacite. In unaltered gabbro, glassy PST contains micron-scale garnet replacing plagioclase microliths during, or soon after, PST cooling. In the host rock, garnet coronas between igneous olivine and plagioclase only occur near PST and between closely spaced PST veins. Absence of garnet away from PST indicates that garnet growth was triggered by mineral seeds and by heat released by PST. The above evidence shows that pseudotachylyte formed at eclogite-facies conditions. In such setting, strong, dry, metastable gabbro-peridotite concentrate stress to generate large intermediate depth subduction earthquakes without much involvement of free fluid.

The July 12, 1993, Hokkaido-Nansei-Oki, Japan, earthquake: Coseismic slip pattern from strong-motion and teleseismic recordings

USGS Publications Warehouse

Mendoza, C.; Fukuyama, E.

1996-01-01

We employ a finite fault inversion scheme to infer the distribution of coseismic slip for the July 12, 1993, Hokkaido-Nansei-Oki earthquake using strong ground motions recorded by the Japan Meteorological Agency within 400 km of the epicenter and vertical P waveforms recorded by the Global Digital Seismograph Network at teleseismic distances. The assumed fault geometry is based on the location of the aftershock zone and comprises two fault segments with different orientations: a northern segment striking at N20??E with a 30?? dip to the west and a southern segment with a N20??W strike. For the southern segment we use both westerly and easterly dip directions to test thrust orientations previously proposed for this portion of the fault. The variance reduction is greater using a shallow west dipping segment, suggesting that the direction of dip did not change as the rupture propagated south from the hypocenter. This indicates that the earthquake resulted from the shallow underthrusting of Hokkaido beneath the Sea of Japan. Static vertical movements predicted by the corresponding distribution of fault slip are consistent with the general pattern of surface deformation observed following the earthquake. Fault rupture in the northern segment accounts for about 60% of the total P wave seismic moment of 3.4 ?? 1020 N m and includes a large circular slip zone (4-m peak) near the earthquake hypocenter at depths between 10 and 25 km. Slip in the southern segment is also predominantly shallower than 25 km, but the maximum coseismic displacements (2.0-2.5 m) are observed at a depth of about 5 km. This significant shallow slip in the southern portion of the rupture zone may have been responsible for the large tsunami that devastated the small offshore island of Okushiri. Localized shallow faulting near the island, however, may require a steep westerly dip to reconcile the measured values of ground subsidence.

Earthquake Damage Assessment Using Objective Image Segmentation: A Case Study of 2010 Haiti Earthquake

NASA Technical Reports Server (NTRS)

Oommen, Thomas; Rebbapragada, Umaa; Cerminaro, Daniel

2012-01-01

In this study, we perform a case study on imagery from the Haiti earthquake that evaluates a novel object-based approach for characterizing earthquake induced surface effects of liquefaction against a traditional pixel based change technique. Our technique, which combines object-oriented change detection with discriminant/categorical functions, shows the power of distinguishing earthquake-induced surface effects from changes in buildings using the object properties concavity, convexity, orthogonality and rectangularity. Our results suggest that object-based analysis holds promise in automatically extracting earthquake-induced damages from high-resolution aerial/satellite imagery.

An approach to detect afterslips in giant earthquakes in the normal-mode frequency band

NASA Astrophysics Data System (ADS)

Tanimoto, Toshiro; Ji, Chen; Igarashi, Mitsutsugu

2012-08-01

An approach to detect afterslips in the source process of giant earthquakes is presented in the normal-mode frequency band (0.3-2.0 mHz). The method is designed to avoid a potential systematic bias problem in the determination of earthquake moment by a typical normal-mode approach. The source of bias is the uncertainties in Q (modal attenuation parameter) which varies by up to about ±10 per cent among published studies. A choice of Q values within this range affects amplitudes in synthetic seismograms significantly if a long time-series of about 5-7 d is used for analysis. We present an alternative time-domain approach that can reduce this problem by focusing on a shorter time span with a length of about 1 d. Application of this technique to four recent giant earthquakes is presented: (1) the Tohoku, Japan, earthquake of 2011 March 11, (2) the 2010 Maule, Chile earthquake, (3) the 2004 Sumatra-Andaman earthquake and (4) the Solomon earthquake of 2007 April 1. The Global Centroid Moment Tensor (GCMT) solution for the Tohoku earthquake explains the normal-mode frequency band quite well. The analysis for the 2010 Chile earthquake indicates that the moment is about 7-10 per cent higher than the moment determined by its GCMT solution but further analysis shows that there is little evidence of afterslip; the deviation in moment can be explained by an increase of the dip angle from 18° in the GCMT solution to 19°. This may be a simple trade-off problem between the moment and dip angle but it may also be due to a deeper centroid in the normal-mode frequency band data, as a deeper source could have steeper dip angle due to changes in geometry of the Benioff zone. For the 2004 Sumatra-Andaman earthquake, the five point-source solution by Tsai et al. explains most of the signals but a sixth point-source with long duration improves the fit to the normal-mode frequency band data. The 2007 Solomon earthquake shows that the high-frequency part of our analysis (above 1 mHz) is

Transportations Systems Modeling and Applications in Earthquake Engineering

DTIC Science & Technology

2010-07-01

49 Figure 6 PGA map of a M7.7 earthquake on all three New Madrid fault segments (g)............... 50...Memphis, Tennessee. The NMSZ was responsible for the devastating 1811-1812 New Madrid earthquakes , the largest earthquakes ever recorded in the...Figure 6 PGA map of a M7.7 earthquake on all three New Madrid fault segments (g) Table 1 Fragility parameters for MSC steel bridge (Padgett 2007

An Arduino project to record ground motion and to learn on earthquake hazard at high school

NASA Astrophysics Data System (ADS)

Saraò, Angela; Barnaba, Carla; Clocchiatti, Marco; Zuliani, David

2015-04-01

Through a multidisciplinary work that integrates Technology education with Earth Sciences, we implemented an educational program to raise the students' awareness of seismic hazard and to disseminate good practices of earthquake safety. Using free software and low-cost open hardware, the students of a senior class of the high school Liceo Paschini in Tolmezzo (NE Italy) implemented a seismograph using the Arduino open-source electronics platform and the ADXL345 sensors to emulate a low cost seismometer (e.g. O-NAVI sensor of the Quake-Catcher Network, http://qcn.stanford.edu). To accomplish their task the students were addressed to use the web resources for technical support and troubleshooting. Shell scripts, running on local computers under Linux OS, controlled the process of recording and display data. The main part of the experiment was documented using the DokuWiki style. Some propaedeutic lessons in computer sciences and electronics were needed to build up the necessary skills of the students and to fill in the gap of their background knowledge. In addition lectures by seismologists and laboratory activity allowed the class to exploit different aspects of the physics of the earthquake and particularly of the seismic waves, and to become familiar with the topics of seismic hazard through an inquiry-based learning. The Arduino seismograph achieved can be used for educational purposes and it can display tremors on the local network of the school. For sure it can record the ground motion due to a seismic event that can occur in the area, but further improvements are necessary for a quantitative analysis of the recorded signals.

Quasi-periodic recurrence of large earthquakes on the southern San Andreas fault

USGS Publications Warehouse

Scharer, Katherine M.; Biasi, Glenn P.; Weldon, Ray J.; Fumal, Tom E.

2010-01-01

It has been 153 yr since the last large earthquake on the southern San Andreas fault (California, United States), but the average interseismic interval is only ~100 yr. If the recurrence of large earthquakes is periodic, rather than random or clustered, the length of this period is notable and would generally increase the risk estimated in probabilistic seismic hazard analyses. Unfortunately, robust characterization of a distribution describing earthquake recurrence on a single fault is limited by the brevity of most earthquake records. Here we use statistical tests on a 3000 yr combined record of 29 ground-rupturing earthquakes from Wrightwood, California. We show that earthquake recurrence there is more regular than expected from a Poisson distribution and is not clustered, leading us to conclude that recurrence is quasi-periodic. The observation of unimodal time dependence is persistent across an observationally based sensitivity analysis that critically examines alternative interpretations of the geologic record. The results support formal forecast efforts that use renewal models to estimate probabilities of future earthquakes on the southern San Andreas fault. Only four intervals (15%) from the record are longer than the present open interval, highlighting the current hazard posed by this fault.

Temporal Variation of Tectonic Tremor Activity Associated with Nearby Earthquakes

NASA Astrophysics Data System (ADS)

Chao, K.; Van der Lee, S.; Hsu, Y. J.; Pu, H. C.

2017-12-01

Tectonic tremor and slow slip events, located downdip from the seismogenic zone, hold the key to recurring patterns of typical earthquakes. Several findings of slow aseismic slip during the prenucletion processes of nearby earthquakes have provided new insight into the study of stress transform of slow earthquakes in fault zones prior to megathrust earthquakes. However, how tectonic tremor is associated with the occurrence of nearby earthquakes remains unclear. To enhance our understanding of the stress interaction between tremor and earthquakes, we developed an algorithm for the automatic detection and location of tectonic tremor in the collisional tectonic environment in Taiwan. Our analysis of a three-year data set indicates a short-term increase in the tremor rate starting at 19 days before the 2010 ML6.4 Jiashian main shock (Chao et al., JGR, 2017). Around the time when the tremor rate began to rise, one GPS station recorded a flip in its direction of motion. We hypothesize that tremor is driven by a slow-slip event that preceded the occurrence of the shallower nearby main shock, even though the inferred slip is too small to be observed by all GPS stations. To better quantify what the necessary condition for tremor to response to nearby earthquakes is, we obtained a 13-year ambient tremor catalog from 2004 to 2016 in the same region. We examine the spatiotemporal relationship between tremor and 37 ML>=5.0 (seven events with ML>=6.0) nearby earthquakes located within 0.5 degrees to the active tremor sources. The findings from this study can enhance our understanding of the interaction among tremor, slow slip, and nearby earthquakes in the high seismic hazard regions.

Flash-sourcing or the rapid detection and characterisation of earthquake effects through clickstream data analysis

NASA Astrophysics Data System (ADS)

Bossu, R.; Mazet-Roux, G.; Roussel, F.; Frobert, L.

2011-12-01

crowd-to-agency system, but unlike them it is not based on declarative information (e.g. answers to a questionnaire) but on implicit data, clickstream observed on our website. We present first the main improvements of the method, improved detection of traffic surges, and a way to instantly map areas affected by severe damage or network disruptions. The second part describes how the derived information improves and fastens public earthquake information and, beyond seismology, what it can teach us on public behaviour when facing an earthquake. Finally, the discussion will focus on the future evolutions and how flash-sourcing could ultimately improve earthquake response.

The 2007 Nazko, British Columbia, earthquake sequence: Injection of magma deep in the crust beneath the Anahim volcanic belt

USGS Publications Warehouse

Cassidy, J.F.; Balfour, N.; Hickson, C.; Kao, H.; White, Rickie; Caplan-Auerbach, J.; Mazzotti, S.; Rogers, Gary C.; Al-Khoubbi, I.; Bird, A.L.; Esteban, L.; Kelman, M.; Hutchinson, J.; McCormack, D.

2011-01-01

On 9 October 2007, an unusual sequence of earthquakes began in central British Columbia about 20 km west of the Nazko cone, the most recent (circa 7200 yr) volcanic center in the Anahim volcanic belt. Within 25 hr, eight earthquakes of magnitude 2.3-2.9 occurred in a region where no earthquakes had previously been recorded. During the next three weeks, more than 800 microearthquakes were located (and many more detected), most at a depth of 25-31 km and within a radius of about 5 km. After about two months, almost all activity ceased. The clear P- and S-wave arrivals indicated that these were high-frequency (volcanic-tectonic) earthquakes and the b value of 1.9 that we calculated is anomalous for crustal earthquakes but consistent with volcanic-related events. Analysis of receiver functions at a station immediately above the seismicity indicated a Moho near 30 km depth. Precise relocation of the seismicity using a double-difference method suggested a horizontal migration at the rate of about 0:5 km=d, with almost all events within the lowermost crust. Neither harmonic tremor nor long-period events were observed; however, some spasmodic bursts were recorded and determined to be colocated with the earthquake hypocenters. These observations are all very similar to a deep earthquake sequence recorded beneath Lake Tahoe, California, in 2003-2004. Based on these remarkable similarities, we interpret the Nazko sequence as an indication of an injection of magma into the lower crust beneath the Anahim volcanic belt. This magma injection fractures rock, producing high-frequency, volcanic-tectonic earthquakes and spasmodic bursts.

Localizing Submarine Earthquakes by Listening to the Water Reverberations

NASA Astrophysics Data System (ADS)

Castillo, J.; Zhan, Z.; Wu, W.

2017-12-01

Mid-Ocean Ridge (MOR) earthquakes generally occur far from any land based station and are of moderate magnitude, making it complicated to detect and in most cases, locate accurately. This limits our understanding of how MOR normal and transform faults move and the manner in which they slip. Different from continental events, seismic records from earthquakes occurring beneath the ocean floor show complex reverberations caused by P-wave energy trapped in the water column that are highly dependent of the source location and the efficiency to which energy propagated to the near-source surface. These later arrivals are commonly considered to be only a nuisance as they might sometimes interfere with the primary arrivals. However, in this study, we take advantage of the wavefield's high sensitivity to small changes in the seafloor topography and the present-day availability of worldwide multi-beam bathymetry to relocate submarine earthquakes by modeling these water column reverberations in teleseismic signals. Using a three-dimensional hybrid method for modeling body wave arrivals, we demonstrate that an accurate hypocentral location of a submarine earthquake (<5 km) can be achieved if the structural complexities near the source region are appropriately accounted for. This presents a novel way of studying earthquake source properties and will serve as a means to explore the influence of physical fault structure on the seismic behavior of transform faults.

Parallelization of the Coupled Earthquake Model

NASA Technical Reports Server (NTRS)

Block, Gary; Li, P. Peggy; Song, Yuhe T.

2007-01-01

This Web-based tsunami simulation system allows users to remotely run a model on JPL s supercomputers for a given undersea earthquake. At the time of this reporting, predicting tsunamis on the Internet has never happened before. This new code directly couples the earthquake model and the ocean model on parallel computers and improves simulation speed. Seismometers can only detect information from earthquakes; they cannot detect whether or not a tsunami may occur as a result of the earthquake. When earthquake-tsunami models are coupled with the improved computational speed of modern, high-performance computers and constrained by remotely sensed data, they are able to provide early warnings for those coastal regions at risk. The software is capable of testing NASA s satellite observations of tsunamis. It has been successfully tested for several historical tsunamis, has passed all alpha and beta testing, and is well documented for users.

Fluid-rock interaction during a large earthquake recorded in fault gouge: A case study of the Nojima fault, Japan

NASA Astrophysics Data System (ADS)

Bian, D.; Lin, A.

2016-12-01

Distinguishing the seismic ruptures during the earthquake from a lot of fractures in borehole core is very important to understand rupture processes and seismic efficiency. In particular, a great earthquake like the 1995 Mw 7.2 Kobe earthquake, but again, evidence has been limited to the grain size analysis and the color of fault gouge. In the past two decades, increasing geological evidence has emerged that seismic faults and shear zones within the middle to upper crust play a crucial role in controlling the architectures of crustal fluid migration. Rock-fluid interactions along seismogenic faults give us a chance to find the seismic ruptures from the same event. Recently, a new project of "Drilling into Fault Damage Zone" has being conducted by Kyoto University on the Nojima Fault again after 20 years of the 1995 Kobe earthquake for an integrated multidisciplinary study on the assessment of activity of active faults involving active tectonics, geochemistry and geochronology of active fault zones. In this work, we report on the signature of slip plane inside the Nojima Fault associated with individual earthquakes on the basis of trace element and isotope analyses. Trace element concentrations and 87Sr/86Sr ratios of fault gouge and host rocks were determined by an inductively coupled plasma mass spectrometer (ICP-MS) and thermal ionization mass spectrometry (TIMS). Samples were collected from two trenches and an outcrop of Nojima Fault which. Based on the geochemical result, we interpret these geochemical results in terms of fluid-rock interactions recorded in fault friction during earthquake. The trace-element enrichment pattern of the slip plane can be explained by fluid-rock interactions at high temperature. It also can help us find the main coseismic fault slipping plane inside the thick fault gouge zone.

The Los Alamos Seismic Network (LASN): Recent Network Upgrades and Northern New Mexico Earthquake Catalog Updates

NASA Astrophysics Data System (ADS)

Roberts, P. M.; House, L. S.; Greene, M.; Ten Cate, J. A.; Schultz-Fellenz, E. S.; Kelley, R.

2012-12-01

From the first data recorded in the fall of 1973 to now, the Los Alamos Seismograph Network (LASN) has operated for nearly 40 years. LASN data have been used to locate more than 2,500 earthquakes in north-central New Mexico. The network was installed for seismic verification research, as well as to monitor and locate earthquakes near Los Alamos National Laboratory (LANL). LASN stations are the only earthquake monitoring stations in New Mexico north of Albuquerque. In the late 1970s, LASN included 22 stations spread over a geographic area of 150 km (N-S) by 350 km (E-W), of northern New Mexico. In the early 1980s, the available funding limited the stations that could be operated to a set of 7, located within an area of about 15 km (N-S) by 15 km (E-W), centered on Los Alamos. Over the last 3 years, 6 additional stations have been installed, which have considerably expanded the spatial coverage of the network. These new stations take advantage of broadband state-of-the-art sensors as well as digital recording and telemetry technology. Currently, 7 stations have broadband, three-component seismometers with digital telemetry, and the remaining 6 have traditional 1 Hz short-period seismometers with analog telemetry. In addition, a vertical array of accelerometers was installed in a wellbore on LANL property. This borehole station has 3-component digital strong-motion sensors. In addition, four forensic strong-motion accelerometers (SMA) are operated at LANL facilities. With 3 of the new broadband stations in and around the nearby Valles Caldera, LASN is now able to monitor any very small volcano-seismic events that may be associated with the caldera. We will present a complete description of the current LASN station, instrumentation and telemetry configurations, as well as the data acquisition and event-detection software structure used to record events in Earthworm. More than 2,000 earthquakes were detected and located in north-central New Mexico during the first 11

The Mw=8.8 Maule earthquake aftershock sequence, event catalog and locations

NASA Astrophysics Data System (ADS)

Meltzer, A.; Benz, H.; Brown, L.; Russo, R. M.; Beck, S. L.; Roecker, S. W.

2011-12-01

The aftershock sequence of the Mw=8.8 Maule earthquake off the coast of Chile in February 2010 is one of the most well-recorded aftershock sequences from a great megathrust earthquake. Immediately following the Maule earthquake, teams of geophysicists from Chile, France, Germany, Great Britain and the United States coordinated resources to capture aftershocks and other seismic signals associated with this significant earthquake. In total, 91 broadband, 48 short period, and 25 accelerometers stations were deployed above the rupture zone of the main shock from 33-38.5°S and from the coast to the Andean range front. In order to integrate these data into a unified catalog, the USGS National Earthquake Information Center develop procedures to use their real-time seismic monitoring system (Bulletin Hydra) to detect, associate, location and compute earthquake source parameters from these stations. As a first step in the process, the USGS has built a seismic catalog of all M3.5 or larger earthquakes for the time period of the main aftershock deployment from March 2010-October 2010. The catalog includes earthquake locations, magnitudes (Ml, Mb, Mb_BB, Ms, Ms_BB, Ms_VX, Mc), associated phase readings and regional moment tensor solutions for most of the M4 or larger events. Also included in the catalog are teleseismic phases and amplitude measures and body-wave MT and CMT solutions for the larger events, typically M5.5 and larger. Tuning of automated detection and association parameters should allow a complete catalog of events to approximately M2.5 or larger for that dataset of more than 164 stations. We characterize the aftershock sequence in terms of magnitude, frequency, and location over time. Using the catalog locations and travel times as a starting point we use double difference techniques to investigate relative locations and earthquake clustering. In addition, phase data from candidate ground truth events and modeling of surface waves can be used to calibrate the

Roman, Visigothic and Islamic evidence of earthquakes recorded in the archaeological site of “El Tolmo de Minateda” (Prebetic Zone, southeast of Spain)

USGS Publications Warehouse

Rodríguez-Pascua, M.A.; Abad Casal, L.; Pérez-López, R.; Gamo Parra, B.; Silva, P.G.; Garduño-Monroy, V.H.; Giner-Robles, J.L.; Perucha, M.A.; Israde-Alcántara, I.; Bischoff, J.; Calvo, J.P.

2013-01-01

The archaeological site of “El Tolmo de Minateda” is located within the Albacete province (SE of Spain) and shows a continuous time record of ancient civilizations from 3500 yr BP onwards. However, three temporal gaps were identified in this archaeological record, all of them in relationship with a sudden and unclear abandonment of the city (Centuries 1st, 7th and 9-10th). The Archaeological Earthquake Effects (EAEs) supports the possibility that moderate to strong earthquakes were the cause of such abandonments: oriented columns fallen, collapsed walls and arches, abandonment of irrigation systems and fresh-water supplies, crashed pottery, etc. Despite of the scarce of instrumental seismicity and a few historical chronicles, paleoseismic studies performed in the neighbouring zone (Tobarra) suggest the presence of closer seismic sources as faults (Pozohondo Fault) affecting Quaternary alluvial, lacustrine deposits and colluviums. In this work, we propose the possibility that three moderate earthquakes devastated the ancient Roman city of Ilunum (Century 1st AD), the Visigothic city of Elo (Century 7th AD) and the Islamic city of Madinat Iyih (Century 9th-10thAD), all of them the same place: “El Tolmo de Minateda”.

A record of large earthquakes on the southern Hayward fault for the past 1800 years

USGS Publications Warehouse

Lienkaemper, J.J.; Williams, P.L.

2007-01-01

This is the second article presenting evidence of the occurrence and timing of paleoearthquakes on the southern Hayward fault as interpreted from trenches excavated within a sag pond at the Tyson's Lagoon site in Fremont, California. We use the information to estimate the mean value and aperiodicity of the fault's recurrence interval (RI): two fundamental parameters for estimation of regional seismic hazard. An earlier article documented the four most recent earthquakes, including the historic 1868 earthquake. In this article we present evidence for at least seven earlier paleoruptures since about A.D. 170. We document these events with evidence for ground rupture, such as the presence of blocky colluvium at the base of the main trace fault scarp, and by corroborating evidence such as simultaneous liquefaction or an increase in deformation immediately below event horizons. The mean RI is 170 ?? 82 yr (1??, standard deviation of the sample), aperiodicity is 0.48, and individual intervals may be expected to range from 30 to 370 yr (95.4% confidence). The mean RI is consistent with the recurrence model of the Working Group on California Earthquake Probabilities (2003) (mean, 161 yr; range, 99 yr [2.5%]; 283 yr [97.5%]). We note that the mean RI for the five most recent events may have been only 138 ?? 58 yr (1??). Hypothesis tests for the shorter RI do not demonstrate that any recent acceleration has occurred compared to the earlier period or the entire 1800-yr record, principally because of inherent uncertainties of the event ages.

GPS detection of ionospheric Rayleigh wave and its source following the 2012 Haida Gwaii earthquake

NASA Astrophysics Data System (ADS)

Jin, Shuanggen; Jin, Rui; Li, D.

2017-01-01

The processes and sources of seismo-ionospheric disturbances are still not clear. In this paper, coseismic ionospheric disturbances (CIDs) are investigated by dual-frequency GPS observations following the Mw = 7.8 earthquake as results of the oblique-thrust fault in the Haida Gwaii region, Canada, on 28 October 2012. Results show that the CIDs with an amplitude of up to 0.15 total electron content units (TECU) are found with spreading out at 2.20 km/s, which agree well with the Rayleigh wave propagation speed at 2.22 km/s detected by the bottom pressure records at about 10 min after the onset. The CIDs are a result of the upward propagation acoustic waves trigged by the Rayleigh wave in sequence from near field to far field. The strong correlation is found between the CIDs and the vertical ground motion recorded by seismometers nearby the epicenter. The total electron content (TEC) series from lower-elevation angle GPS observations have higher perturbation amplitudes. Furthermore, the simulated ionospheric disturbance following a vertical Gauss pulse on the ground based on the finite difference time domain method confirms the ionospheric Rayleigh wave signature in the near field and the vertical ground motion dependence theoretically. The vertical ground motion is the dominant source of the ionospheric Rayleigh wave and affects the CID waveform directly.

Evaluation of Earthquake Detection Performance in Terms of Quality and Speed in SEISCOMP3 Using New Modules Qceval, Npeval and Sceval

NASA Astrophysics Data System (ADS)

Roessler, D.; Weber, B.; Ellguth, E.; Spazier, J.

2017-12-01

The geometry of seismic monitoring networks, site conditions and data availability as well as monitoring targets and strategies typically impose trade-offs between data quality, earthquake detection sensitivity, false detections and alert times. Network detection capabilities typically change with alteration of the seismic noise level by human activity or by varying weather and sea conditions. To give helpful information to operators and maintenance coordinators, gempa developed a range of tools to evaluate earthquake detection and network performance including qceval, npeval and sceval. qceval is a module which analyzes waveform quality parameters in real-time and deactivates and reactivates data streams based on waveform quality thresholds for automatic processing. For example, thresholds can be defined for latency, delay, timing quality, spikes and gaps count and rms. As changes in the automatic processing have a direct influence on detection quality and speed, another tool called "npeval" was designed to calculate in real-time the expected time needed to detect and locate earthquakes by evaluating the effective network geometry. The effective network geometry is derived from the configuration of stations participating in the detection. The detection times are shown as an additional layer on the map and updated in real-time as soon as the effective network geometry changes. Yet another new tool, "sceval", is an automatic module which classifies located seismic events (Origins) in real-time. sceval evaluates the spatial distribution of the stations contributing to an Origin. It confirms or rejects the status of Origins, adds comments or leaves the Origin unclassified. The comments are passed to an additional sceval plug-in where the end user can customize event types. This unique identification of real and fake events in earthquake catalogues allows to lower network detection thresholds. In real-time monitoring situations operators can limit the processing to

Machine-Learning Inspired Seismic Phase Detection for Aftershocks of the 2008 MW7.9 Wenchuan Earthquake

NASA Astrophysics Data System (ADS)

Zhu, L.; Li, Z.; Li, C.; Wang, B.; Chen, Z.; McClellan, J. H.; Peng, Z.

2017-12-01

Spatial-temporal evolution of aftershocks is important for illumination of earthquake physics and for rapid response of devastative earthquakes. To improve aftershock catalogs of the 2008 MW7.9 Wenchuan earthquake in Sichuan, China, Alibaba cloud and China Earthquake Administration jointly launched a seismological contest in May 2017 [Fang et al., 2017]. This abstract describes how we handle this problem in this competition. We first used Short-Term Average/Long-Term Average (STA/LTA) and Kurtosis function to obtain over 55000 candidate phase picks (P or S). Based on Signal to Noise Ratio (SNR), about 40000 phases (P or S) are selected. So far, these 40000 phases have a hit rate of 40% among the manually picks. The causes include that 1) there exist false picks (neither P nor S); 2) some P and S arrivals are mis-labeled. To improve our results, we correlate the 40000 phases over continuous waveforms to obtain the phases missed by during the first pass. This results in 120,000 events. After constructing an affinity matrix based on the cross-correlation for newly detected phases, subspace clustering methods [Vidal 2011] are applied to group those phases into separated subspaces. Initial results show good agreement between empirical and clustered labels of P phases. Half of the empirical S phases are clustered into the P phase cluster. This may be a combined effect of 1) mislabeling isolated P phases to S phases and 2) clustering errors due to a small incomplete sample pool. Phases that were falsely detected in the initial results can be also teased out. To better characterize P and S phases, our next step is to apply subspace clustering methods directly to the waveforms, instead of using the cross-correlation coefficients of detected phases. After that, supervised learning, e.g., a convolutional neural network, can be employed to improve the pick accuracy. Updated results will be presented at the meeting.

Detection of induced seismicity due to oil and gas extraction in the northern Gulf of Mexico, USA

NASA Astrophysics Data System (ADS)

Fadugba, Oluwaseun Idowu

Drilling operations and extraction of oil and gas (O&G) may lead to subsurface slumping or compression of sediments due to reduced vertical principal stress which may lead to small earthquakes at the drilling site. O&G extraction is common in the northern Gulf of Mexico (NGM) and only thirty-five earthquakes of magnitudes between 2.3 and 6.0 have been recorded in the area from 1974 to the present. The purpose of this research is to detect more earthquakes using stacks of seismic data from the Transportable USArray (TA) from 2011 to 2013, and determine the spatiotemporal relationship between the detected earthquakes and O&G extraction. Five new small offshore earthquakes, that may be associated with the offshore O&G production, have been detected in the data. Spatial correlation of the epicenters with offshore drilling sites shows that the earthquakes may be due to the O&G extraction.

Full wave field recording of the vertical strain at SAFOD from local, regional and teleseismic earthquakes

NASA Astrophysics Data System (ADS)

Ellsworth, W. L.; Karrenbach, M. H.; Zumberge, M. A.

2017-12-01

The main borehole at the San Andreas Fault Observatory at Depth (SAFOD) contains optical fibers cemented in place in between casing strings from the surface to just below the top of the basement. The fibers are under tension of approximately 1 N and are housed in a 0.9 mm diameter stainless steel tube. Earth strain is transmitted to the fiber by frictional contact with the tube wall. One fiber has been in use as a vertical strainmeter since 2005, measuring the total strain between 9 and 740 m by laser interferometry. In June 2017 we attached an OptaSense Distributed Acoustic Sensing (DAS) system, model ODH3.1, to a second fiber that terminates at 864 m depth. The DAS laser interrogator measures the strain over a gauge length with a set spacing between gauge intervals. For this experiment we set the gauge length to 10 m with 1 m spacing between gauges. Including the surface run of the fiber, this gives us 936 channels measuring the vertical strain at a sample interval of 0.4 msec (2500 samples/s). Continuous recording of the string produces approximately 1 TB/day. During one month of data collection, we recorded local, regional and teleseismic earthquakes. With this recording geometry, the DAS system captures the full vertical wavefield between the basement interface and free surface, revealing direct, converted and refracted waves. Both P- and S- strain waves are clearly visible in the data, even for 10 km deep earthquakes located almost directly below the well (see figure). The incident and surface reflected wavefields can be separated by frequency-wavenumber filtering due to the large-aperture and fine spatial and temporal sampling. Up- and downgoing strain waves illuminate the subsurface within the sensor array's depth range. Accurate arrival time determinations of the initial arrival phase are possible due to consistent wave forms recorded at 1 m spatial intervals that can be used for fine-scale shallow velocity model estimation.

Interpreting the strongest deep earthquake ever observed

NASA Astrophysics Data System (ADS)

Schultz, Colin

2013-12-01

Massive earthquakes that strike deep within the Earth may be more efficient at dissipating pent-up energy than similar quakes near the surface, according to new research by Wei et al. The authors analyzed the rupture of the most powerful deep earthquake ever recorded.

Strong Motion Network of Medellín and Aburrá Valley: technical advances, seismicity records and micro-earthquake monitoring

NASA Astrophysics Data System (ADS)

Posada, G.; Trujillo, J. C., Sr.; Hoyos, C.; Monsalve, G.

2017-12-01

The tectonics setting of Colombia is determined by the interaction of Nazca, Caribbean and South American plates, together with the Panama-Choco block collision, which makes a seismically active region. Regional seismic monitoring is carried out by the National Seismological Network of Colombia and the Accelerometer National Network of Colombia. Both networks calculate locations, magnitudes, depths and accelerations, and other seismic parameters. The Medellín - Aburra Valley is located in the Northern segment of the Central Cordillera of Colombia, and according to the Colombian technical seismic norm (NSR-10), is a region of intermediate hazard, because of the proximity to seismic sources of the Valley. Seismic monitoring in the Aburra Valley began in 1996 with an accelerometer network which consisted of 38 instruments. Currently, the network consists of 26 stations and is run by the Early Warning System of Medellin and Aburra Valley (SIATA). The technical advances have allowed the real-time communication since a year ago, currently with 10 stations; post-earthquake data is processed through operationally near-real-time, obtaining quick results in terms of location, acceleration, spectrum response and Fourier analysis; this information is displayed at the SIATA web site. The strong motion database is composed by 280 earthquakes; this information is the basis for the estimation of seismic hazards and risk for the region. A basic statistical analysis of the main information was carried out, including the total recorded events per station, natural frequency, maximum accelerations, depths and magnitudes, which allowed us to identify the main seismic sources, and some seismic site parameters. With the idea of a more complete seismic monitoring and in order to identify seismic sources beneath the Valley, we are in the process of installing 10 low-cost shake seismometers for micro-earthquake monitoring. There is no historical record of earthquakes with a magnitude

Earthquakes: Risk, Detection, Warning, and Research

DTIC Science & Technology

2010-01-14

which affect taller , multi-story buildings. Ground motion that affects shorter buildings of a few stories, called short-period seismic waves, is...places in a single fault, or jump between connected faults. Earthquakes that occur along the Sierra Madre fault in southern California, for example

Seismic databases and earthquake catalogue of the Caucasus

NASA Astrophysics Data System (ADS)

Godoladze, Tea; Javakhishvili, Zurab; Tvaradze, Nino; Tumanova, Nino; Jorjiashvili, Nato; Gok, Rengen

2016-04-01

The Caucasus has a documented historical catalog stretching back to the beginning of the Christian era. Most of the largest historical earthquakes prior to the 19th century are assumed to have occurred on active faults of the Greater Caucasus. Important earthquakes include the Samtskhe earthquake of 1283, Ms~7.0, Io=9; Lechkhumi-Svaneti earthquake of 1350, Ms~7.0, Io=9; and the Alaverdi(earthquake of 1742, Ms~6.8, Io=9. Two significant historical earthquakes that may have occurred within the Javakheti plateau in the Lesser Caucasus are the Tmogvi earthquake of 1088, Ms~6.5, Io=9 and the Akhalkalaki earthquake of 1899, Ms~6.3, Io =8-9. Large earthquakes that occurred in the Caucasus within the period of instrumental observation are: Gori 1920; Tabatskuri 1940; Chkhalta 1963; 1991 Ms=7.0 Racha earthquake, the largest event ever recorded in the region; the 1992 M=6.5 Barisakho earthquake; Ms=6.9 Spitak, Armenia earthquake (100 km south of Tbilisi), which killed over 50,000 people in Armenia. Recently, permanent broadband stations have been deployed across the region as part of various national networks (Georgia (~25 stations), Azerbaijan (~35 stations), Armenia (~14 stations)). The data from the last 10 years of observation provides an opportunity to perform modern, fundamental scientific investigations. A catalog of all instrumentally recorded earthquakes has been compiled by the IES (Institute of Earth Sciences, Ilia State University). The catalog consists of more then 80,000 events. Together with our colleagues from Armenia, Azerbaijan and Turkey the database for the Caucasus seismic events was compiled. We tried to improve locations of the events and calculate Moment magnitudes for the events more than magnitude 4 estimate in order to obtain unified magnitude catalogue of the region. The results will serve as the input for the Seismic hazard assessment for the region.

Alarm systems detect volcanic tremor and earthquake swarms during Redoubt eruption, 2009

NASA Astrophysics Data System (ADS)

Thompson, G.; West, M. E.

2009-12-01

We ran two alarm algorithms on real-time data from Redoubt volcano during the 2009 crisis. The first algorithm was designed to detect escalations in continuous seismicity (tremor). This is implemented within an application called IceWeb which computes reduced displacement, and produces plots of reduced displacement and spectrograms linked to the Alaska Volcano Observatory internal webpage every 10 minutes. Reduced displacement is a measure of the amplitude of volcanic tremor, and is computed by applying a geometrical spreading correction to a displacement seismogram. When the reduced displacement at multiple stations exceeds pre-defined thresholds and there has been a factor of 3 increase in reduced displacement over the previous hour, a tremor alarm is declared. The second algorithm was to designed to detect earthquake swarms. The mean and median event rates are computed every 5 minutes based on the last hour of data from a real-time event catalog. By comparing these with thresholds, three swarm alarm conditions can be declared: a new swarm, an escalation in a swarm, and the end of a swarm. The end of swarm alarm is important as it may mark a transition from swarm to continuous tremor. Alarms from both systems were dispatched using a generic alarm management system which implements a call-down list, allowing observatory scientists to be called in sequence until someone acknowledged the alarm via a confirmation web page. The results of this simple approach are encouraging. The tremor alarm algorithm detected 26 of the 27 explosive eruptions that occurred from 23 March - 4 April. The swarm alarm algorithm detected all five of the main volcanic earthquake swarm episodes which occurred during the Redoubt crisis on 26-27 February, 21-23 March, 26 March, 2-4 April and 3-7 May. The end-of-swarm alarms on 23 March and 4 April were particularly helpful as they were caused by transitions from swarm to tremor shortly preceding explosive eruptions; transitions which were

Testing earthquake source inversion methodologies

USGS Publications Warehouse

Page, M.; Mai, P.M.; Schorlemmer, D.

2011-01-01

Source Inversion Validation Workshop; Palm Springs, California, 11-12 September 2010; Nowadays earthquake source inversions are routinely performed after large earthquakes and represent a key connection between recorded seismic and geodetic data and the complex rupture process at depth. The resulting earthquake source models quantify the spatiotemporal evolution of ruptures. They are also used to provide a rapid assessment of the severity of an earthquake and to estimate losses. However, because of uncertainties in the data, assumed fault geometry and velocity structure, and chosen rupture parameterization, it is not clear which features of these source models are robust. Improved understanding of the uncertainty and reliability of earthquake source inversions will allow the scientific community to use the robust features of kinematic inversions to more thoroughly investigate the complexity of the rupture process and to better constrain other earthquakerelated computations, such as ground motion simulations and static stress change calculations.

The initial subevent of the 1994 Northridge, California, earthquake: Is earthquake size predictable?

USGS Publications Warehouse

Kilb, Debi; Gomberg, J.

1999-01-01

We examine the initial subevent (ISE) of the M?? 6.7, 1994 Northridge, California, earthquake in order to discriminate between two end-member rupture initiation models: the 'preslip' and 'cascade' models. Final earthquake size may be predictable from an ISE's seismic signature in the preslip model but not in the cascade model. In the cascade model ISEs are simply small earthquakes that can be described as purely dynamic ruptures. In this model a large earthquake is triggered by smaller earthquakes; there is no size scaling between triggering and triggered events and a variety of stress transfer mechanisms are possible. Alternatively, in the preslip model, a large earthquake nucleates as an aseismically slipping patch in which the patch dimension grows and scales with the earthquake's ultimate size; the byproduct of this loading process is the ISE. In this model, the duration of the ISE signal scales with the ultimate size of the earthquake, suggesting that nucleation and earthquake size are determined by a more predictable, measurable, and organized process. To distinguish between these two end-member models we use short period seismograms recorded by the Southern California Seismic Network. We address questions regarding the similarity in hypocenter locations and focal mechanisms of the ISE and the mainshock. We also compare the ISE's waveform characteristics to those of small earthquakes and to the beginnings of earthquakes with a range of magnitudes. We find that the focal mechanisms of the ISE and mainshock are indistinguishable, and both events may have nucleated on and ruptured the same fault plane. These results satisfy the requirements for both models and thus do not discriminate between them. However, further tests show the ISE's waveform characteristics are similar to those of typical small earthquakes in the vicinity and more importantly, do not scale with the mainshock magnitude. These results are more consistent with the cascade model.

Glacier quakes mimicking volcanic earthquakes: The challenge of monitoring ice-clad volcanoes and some solutions

NASA Astrophysics Data System (ADS)

Allstadt, K.; Carmichael, J. D.; Malone, S. D.; Bodin, P.; Vidale, J. E.; Moran, S. C.

2012-12-01

Swarms of repeating earthquakes at volcanoes are often a sign of volcanic unrest. However, glaciers also can generate repeating seismic signals, so detecting unrest at glacier-covered volcanoes can be a challenge. We have found that multi-day swarms of shallow, low-frequency, repeating earthquakes occur regularly at Mount Rainier, a heavily glaciated stratovolcano in Washington, but that most swarms had escaped recognition until recently. Typically such earthquakes were too small to be routinely detected by the seismic network and were often buried in the noise on visual records, making the few swarms that had been detected seem more unusual and significant at the time they were identified. Our comprehensive search for repeating earthquakes through the past 10 years of continuous seismic data uncovered more than 30 distinct swarms of low-frequency earthquakes at Rainier, each consisting of hundreds to thousands of events. We found that these swarms locate high on the glacier-covered edifice, occur almost exclusively between late fall and early spring, and that their onset coincides with heavy snowfalls. We interpret the correlation with snowfall to indicate a seismically observable glacial response to snow loading. Efforts are underway to confirm this by monitoring glacier motion before and after a major snowfall event using ground based radar interferometry. Clearly, if the earthquakes in these swarms reflect a glacial source, then they are not directly related to volcanic activity. However, from an operational perspective they make volcano monitoring difficult because they closely resemble earthquakes that often precede and accompany volcanic eruptions. Because we now have a better sense of the background level of such swarms and know that their occurrence is seasonal and correlated with snowfall, it will now be easier to recognize if future swarms at Rainier are unusual and possibly related to volcanic activity. To methodically monitor for such unusual activity

Towards coupled earthquake dynamic rupture and tsunami simulations: The 2011 Tohoku earthquake.

NASA Astrophysics Data System (ADS)

Galvez, Percy; van Dinther, Ylona

2016-04-01

The 2011 Mw9 Tohoku earthquake has been recorded with a vast GPS and seismic network given an unprecedented chance to seismologists to unveil complex rupture processes in a mega-thrust event. The seismic stations surrounding the Miyagi regions (MYGH013) show two clear distinct waveforms separated by 40 seconds suggesting two rupture fronts, possibly due to slip reactivation caused by frictional melting and thermal fluid pressurization effects. We created a 3D dynamic rupture model to reproduce this rupture reactivation pattern using SPECFEM3D (Galvez et al, 2014) based on a slip-weakening friction with sudden two sequential stress drops (Galvez et al, 2015) . Our model starts like a M7-8 earthquake breaking dimly the trench, then after 40 seconds a second rupture emerges close to the trench producing additional slip capable to fully break the trench and transforming the earthquake into a megathrust event. The seismograms agree roughly with seismic records along the coast of Japan. The resulting sea floor displacements are in agreement with 1Hz GPS displacements (GEONET). The simulated sea floor displacement reaches 8-10 meters of uplift close to the trench, which may be the cause of such a devastating tsunami followed by the Tohoku earthquake. To investigate the impact of such a huge uplift, we ran tsunami simulations with the slip reactivation model and plug the sea floor displacements into GeoClaw (Finite element code for tsunami simulations, George and LeVeque, 2006). Our recent results compare well with the water height at the tsunami DART buoys 21401, 21413, 21418 and 21419 and show the potential using fully dynamic rupture results for tsunami studies for earthquake-tsunami scenarios.

Geophysical advances triggered by 1964 Great Alaska Earthquake

USGS Publications Warehouse

Haeussler, Peter J.; Leith, William S.; Wald, David J.; Filson, John R.; Wolfe, Cecily; Applegate, David

2014-01-01

A little more than 50 years ago, on 27 March 1964, the Great Alaska earthquake and tsunami struck. At moment magnitude 9.2, this earthquake is notable as the largest in U.S. written history and as the second-largest ever recorded by instruments worldwide. But what resonates today are its impacts on the understanding of plate tectonics, tsunami generation, and earthquake history as well as on the development of national programs to reduce risk from earthquakes and tsunamis.

A PC-based computer package for automatic detection and location of earthquakes: Application to a seismic network in eastern sicity (Italy)

NASA Astrophysics Data System (ADS)

Patanè, Domenico; Ferrari, Ferruccio; Giampiccolo, Elisabetta; Gresta, Stefano

Few automated data acquisition and processing systems operate on mainframes, some run on UNIX-based workstations and others on personal computers, equipped with either DOS/WINDOWS or UNIX-derived operating systems. Several large and complex software packages for automatic and interactive analysis of seismic data have been developed in recent years (mainly for UNIX-based systems). Some of these programs use a variety of artificial intelligence techniques. The first operational version of a new software package, named PC-Seism, for analyzing seismic data from a local network is presented in Patanè et al. (1999). This package, composed of three separate modules, provides an example of a new generation of visual object-oriented programs for interactive and automatic seismic data-processing running on a personal computer. In this work, we mainly discuss the automatic procedures implemented in the ASDP (Automatic Seismic Data-Processing) module and real time application to data acquired by a seismic network running in eastern Sicily. This software uses a multi-algorithm approach and a new procedure MSA (multi-station-analysis) for signal detection, phase grouping and event identification and location. It is designed for an efficient and accurate processing of local earthquake records provided by single-site and array stations. Results from ASDP processing of two different data sets recorded at Mt. Etna volcano by a regional network are analyzed to evaluate its performance. By comparing the ASDP pickings with those revised manually, the detection and subsequently the location capabilities of this software are assessed. The first data set is composed of 330 local earthquakes recorded in the Mt. Etna erea during 1997 by the telemetry analog seismic network. The second data set comprises about 970 automatic locations of more than 2600 local events recorded at Mt. Etna during the last eruption (July 2001) at the present network. For the former data set, a comparison of the

Strong motion recordings of the 2008/12/23 earthquake in Northern Italy: another case of very weak motion?

NASA Astrophysics Data System (ADS)

Sabetta, F.; Zambonelli, E.

2009-04-01

On December 23 2008 an earthquake of magnitude ML=5.1 (INGV) Mw=5.4 (INGV-Harvard Global CMT) occurred in northern Italy close to the cities of Parma and Reggio Emilia. The earthquake, with a macroseismic intensity of VI MCS, caused a very slight damage (some tens of unusable buildings and some hundreds of damaged buildings), substantially lower than the damage estimated by the loss simulation scenario currently used by the Italian Civil Protection. Due to the recent upgrading of the Italian strong motion network (RAN), the event has been recorded by a great number of accelerometers (the largest ever obtained in Italy for a single shock): 21 digital and 8 analog instruments with epicentral distances ranging from 16 to 140 km. The comparison of recorded PGA, PGV, Arias intensity, and spectral values with several widely used Ground Motion Prediction Equations (GMPEs) showed much lower ground motion values respect to the empirical predictions (a factor ranging from 4 to 2). A first explanation of the strong differences, in damage and ground motion, between actual data and predictions could be, at a first sight, attributed to the rather high focal depth of 27 km. However, even the adoption of GMPEs accounting for depth of the source and using hypocentral distance (Berge et al 2003, Pousse et al 2005), does not predict large differences in motions, especially at distances larger than 30 km where most of the data are concentrated and where the effect of depth on source-to-site distance is small. At the same time the adoption of the most recent GMPEs (Ambraseys et al 2005, Akkar & bommer 2007) taking into account the different magnitude scaling and the faster attenuation of small magnitudes through magnitude-dependent attenuation, does not show a better agreement with the recorded data. The real reasons of the above mentioned discrepancies need to be further investigated, however a possible explanation could be a low source rupture velocity, likewise the 2002 Molise

Are Earthquake Clusters/Supercycles Real or Random?

NASA Astrophysics Data System (ADS)

Salditch, L.; Brooks, E. M.; Stein, S.; Spencer, B. D.

2016-12-01

Long records of earthquakes at plate boundaries such as the San Andreas or Cascadia often show that large earthquakes occur in temporal clusters, also termed supercycles, separated by less active intervals. These are intriguing because the boundary is presumably being loaded by steady plate motion. If so, earthquakes resulting from seismic cycles - in which their probability is small shortly after the past one, and then increases with time - should occur quasi-periodically rather than be more frequent in some intervals than others. We are exploring this issue with two approaches. One is to assess whether the clusters result purely by chance from a time-independent process that has no "memory." Thus a future earthquake is equally likely immediately after the past one and much later, so earthquakes can cluster in time. We analyze the agreement between such a model and inter-event times for Parkfield, Pallet Creek, and other records. A useful tool is transformation by the inverse cumulative distribution function, so the inter-event times have a uniform distribution when the memorylessness property holds. The second is via a time-variable model in which earthquake probability increases with time between earthquakes and decreases after an earthquake. The probability of an event increases with time until one happens, after which it decreases, but not to zero. Hence after a long period of quiescence, the probability of an earthquake can remain higher than the long-term average for several cycles. Thus the probability of another earthquake is path dependent, i.e. depends on the prior earthquake history over multiple cycles. Time histories resulting from simulations give clusters with properties similar to those observed. The sequences of earthquakes result from both the model parameters and chance, so two runs with the same parameters look different. The model parameters control the average time between events and the variation of the actual times around this average, so

Introduction to the special issue on the 2004 Parkfield earthquake and the Parkfield earthquake prediction experiment

USGS Publications Warehouse

Harris, R.A.; Arrowsmith, J.R.

2006-01-01

The 28 September 2004 M 6.0 Parkfield earthquake, a long-anticipated event on the San Andreas fault, is the world's best recorded earthquake to date, with state-of-the-art data obtained from geologic, geodetic, seismic, magnetic, and electrical field networks. This has allowed the preearthquake and postearthquake states of the San Andreas fault in this region to be analyzed in detail. Analyses of these data provide views into the San Andreas fault that show a complex geologic history, fault geometry, rheology, and response of the nearby region to the earthquake-induced ground movement. Although aspects of San Andreas fault zone behavior in the Parkfield region can be modeled simply over geological time frames, the Parkfield Earthquake Prediction Experiment and the 2004 Parkfield earthquake indicate that predicting the fine details of future earthquakes is still a challenge. Instead of a deterministic approach, forecasting future damaging behavior, such as that caused by strong ground motions, will likely continue to require probabilistic methods. However, the Parkfield Earthquake Prediction Experiment and the 2004 Parkfield earthquake have provided ample data to understand most of what did occur in 2004, culminating in significant scientific advances.

Strong Scaling and a Scarcity of Small Earthquakes Point to an Important Role for Thermal Runaway in Intermediate-Depth Earthquake Mechanics

NASA Astrophysics Data System (ADS)

Barrett, S. A.; Prieto, G. A.; Beroza, G. C.

2015-12-01

There is strong evidence that metamorphic reactions play a role in enabling the rupture of intermediate-depth earthquakes; however, recent studies of the Bucaramanga Nest at a depth of 135-165 km under Colombia indicate that intermediate-depth seismicity shows low radiation efficiency and strong scaling of stress drop with slip/size, which suggests a dramatic weakening process, as proposed in the thermal shear instability model. Decreasing stress drop with slip and low seismic efficiency could have a measurable effect on the magnitude-frequency distribution of small earthquakes by causing them to become undetectable at substantially larger seismic moment than would be the case if stress drop were constant. We explore the population of small earthquakes in the Bucaramanga Nest using an empirical subspace detector to push the detection limit to lower magnitude. Using this approach, we find ~30,000 small, previously uncatalogued earthquakes during a 6-month period in 2013. We calculate magnitudes for these events using their relative amplitudes. Despite the additional detections, we observe a sharp deviation from a Gutenberg-Richter magnitude frequency distribution with a marked deficiency of events at the smallest magnitudes. This scarcity of small earthquakes is not easily ascribed to the detectability threshold; tests of our ability to recover small-magnitude waveforms of Bucaramanga Nest earthquakes in the continuous data indicate that we should be able to detect events reliably at magnitudes that are nearly a full magnitude unit smaller than the smallest earthquakes we observe. The implication is that nearly 100,000 events expected for a Gutenberg-Richter MFD are "missing," and that this scarcity of small earthquakes may provide new support for the thermal runaway mechanism in intermediate-depth earthquake mechanics.

Large earthquakes and creeping faults

USGS Publications Warehouse

Harris, Ruth A.

2017-01-01

Faults are ubiquitous throughout the Earth's crust. The majority are silent for decades to centuries, until they suddenly rupture and produce earthquakes. With a focus on shallow continental active-tectonic regions, this paper reviews a subset of faults that have a different behavior. These unusual faults slowly creep for long periods of time and produce many small earthquakes. The presence of fault creep and the related microseismicity helps illuminate faults that might not otherwise be located in fine detail, but there is also the question of how creeping faults contribute to seismic hazard. It appears that well-recorded creeping fault earthquakes of up to magnitude 6.6 that have occurred in shallow continental regions produce similar fault-surface rupture areas and similar peak ground shaking as their locked fault counterparts of the same earthquake magnitude. The behavior of much larger earthquakes on shallow creeping continental faults is less well known, because there is a dearth of comprehensive observations. Computational simulations provide an opportunity to fill the gaps in our understanding, particularly of the dynamic processes that occur during large earthquake rupture and arrest.

Estimation of seismic velocity changes at different depths associated with the 2014 Northern Nagano Prefecture earthquake, Japan ( M W 6.2) by joint interferometric analysis of NIED Hi-net and KiK-net records

NASA Astrophysics Data System (ADS)

Sawazaki, Kaoru; Saito, Tatsuhiko; Ueno, Tomotake; Shiomi, Katsuhiko

2016-12-01

To estimate the seismic velocity changes at different depths associated with a large earthquake, we apply passive image interferometry to two types of seismograms: KiK-net vertical pairs of earthquake records and Hi-net continuous borehole data. We compute the surface/borehole deconvolution waveform (DCW) of seismograms recorded by a KiK-net station and the autocorrelation function (ACF) of ambient noise recorded by a collocated Hi-net station, 26 km from the epicenter of the 2014 Northern Nagano Prefecture earthquake, Japan ( M W 6.2). Because the deeper KiK-net sensor and the Hi-net sensor are collocated at 150 m depth, and another KiK-net sensor is located at the surface directly above the borehole sensors, we can measure shallow (<150 m depth) and deep (>150 m depth) velocity changes separately. The sensitivity of the ACF to the velocity changes in the deeper zone is evaluated by a numerical wave propagation simulation. We detect relative velocity changes of -3.1 and -1.4% in the shallow and deep zones, respectively, within 1 week of the mainshock. The relative velocity changes recover to -1.9 and -1.1%, respectively, during the period between 1 week and 4 months after the mainshock. The observed relative velocity reductions can be attributed to dynamic strain changes due to the strong ground motion, rather than static strain changes due to coseismic deformation by the mainshock. The speed of velocity recovery may be faster in the shallow zone than in the deep zone because the recovery speed is controlled by initial damage in the medium. This recovery feature is analogous to the behavior of slow dynamics observed in rock experiments.

Paleotsunami deposits along the coast of Egypt correlate with historical earthquake records of eastern Mediterranean

NASA Astrophysics Data System (ADS)

Salama, Asem; Meghraoui, Mustapha; El Gabry, Mohamed; Maouche, Said; Hussein, Hesham; Korrat, Ibrahim

2017-04-01

Tsunami deposits are investigated along the Mediterranean coast of Egypt in the framework of the EC-Funded ASTARTE project (Assessment, Strategy And Risk Reduction for Tsunamis in Europe - FP7-ENV2013 6.4-3, Grant 603839) and the French-Egyptian IMHOTEP project. The study area located west of Alexandria is selected according to historical earthquakes and related inundation events as recorded in archives. Field investigations include: 1) Coastal geomorphology along estuaries, wedge-protected and dune-protected lagunas, and terrace-platforms as potential sites for paleotsunami and boulder records, and 2) Investigations of paleotsunamis deposits and their spatial distribution using trenching and coring. In addition of 10 trenches (1.5-m-depth) and 16 (1 to 2.5-m-depth) core descriptions with detailed logging and Xrays, data collection includes geochemical analysis, magnetic susceptibility and radiocarbon dating necessary for the identification of tsunamis records. In stratigraphic successions of low energy marine and alluvial deposits, mixed sand, gravel and broken shells are interpreted as catastrophic layers correlated with tsunami deposits. The two selected sites at Kefret Saber 32-km west of Marsa-Matruh city and 10 km northwest of El Alamein village are inner lagunas protected by 2 to 40-m-high dunes parallel to the shoreline. A total of 50 samples of organic deposits and charcoal fragments were collected from both sites, among which 20 samples have been dated. Dated charcoal in deposits above and below the catastrophic layers lead us to correlate them with the 24 June 1870 (Mw 7.5), 8 August 1303 (Mw 8) and 21 July 365 (Mw 8 - 8.5), major earthquakes that generated tsunamis with the inundation of Alexandria harbor. Major tsunamigenic seismic sources being along the Hellenic subduction zone and Cyprus arc, our study of paleotsunami deposits and their distribution along the Egyptian coast will help in a better constraint of the size and recurrence of tsunamis, and

Modeling of earthquake ground motion in the frequency domain

NASA Astrophysics Data System (ADS)

Thrainsson, Hjortur

In recent years, the utilization of time histories of earthquake ground motion has grown considerably in the design and analysis of civil structures. It is very unlikely, however, that recordings of earthquake ground motion will be available for all sites and conditions of interest. Hence, there is a need for efficient methods for the simulation and spatial interpolation of earthquake ground motion. In addition to providing estimates of the ground motion at a site using data from adjacent recording stations, spatially interpolated ground motions can also be used in design and analysis of long-span structures, such as bridges and pipelines, where differential movement is important. The objective of this research is to develop a methodology for rapid generation of horizontal earthquake ground motion at any site for a given region, based on readily available source, path and site characteristics, or (sparse) recordings. The research includes two main topics: (i) the simulation of earthquake ground motion at a given site, and (ii) the spatial interpolation of earthquake ground motion. In topic (i), models are developed to simulate acceleration time histories using the inverse discrete Fourier transform. The Fourier phase differences, defined as the difference in phase angle between adjacent frequency components, are simulated conditional on the Fourier amplitude. Uniformly processed recordings from recent California earthquakes are used to validate the simulation models, as well as to develop prediction formulas for the model parameters. The models developed in this research provide rapid simulation of earthquake ground motion over a wide range of magnitudes and distances, but they are not intended to replace more robust geophysical models. In topic (ii), a model is developed in which Fourier amplitudes and Fourier phase angles are interpolated separately. A simple dispersion relationship is included in the phase angle interpolation. The accuracy of the interpolation

The 1964 Great Alaska Earthquake and tsunamis: a modern perspective and enduring legacies

USGS Publications Warehouse

Brocher, Thomas M.; Filson, John R.; Fuis, Gary S.; Haeussler, Peter J.; Holzer, Thomas L.; Plafker, George; Blair, J. Luke

2014-01-01

The magnitude 9.2 Great Alaska Earthquake that struck south-central Alaska at 5:36 p.m. on Friday, March 27, 1964, is the largest recorded earthquake in U.S. history and the second-largest earthquake recorded with modern instruments. The earthquake was felt throughout most of mainland Alaska, as far west as Dutch Harbor in the Aleutian Islands some 480 miles away, and at Seattle, Washington, more than 1,200 miles to the southeast of the fault rupture, where the Space Needle swayed perceptibly. The earthquake caused rivers, lakes, and other waterways to slosh as far away as the coasts of Texas and Louisiana. Water-level recorders in 47 states—the entire Nation except for Connecticut, Delaware, and Rhode Island— registered the earthquake. It was so large that it caused the entire Earth to ring like a bell: vibrations that were among the first of their kind ever recorded by modern instruments. The Great Alaska Earthquake spawned thousands of lesser aftershocks and hundreds of damaging landslides, submarine slumps, and other ground failures. Alaska’s largest city, Anchorage, located west of the fault rupture, sustained heavy property damage. Tsunamis produced by the earthquake resulted in deaths and damage as far away as Oregon and California. Altogether the earthquake and subsequent tsunamis caused 129 fatalities and an estimated $2.3 billion in property losses (in 2013 dollars). Most of the population of Alaska and its major transportation routes, ports, and infrastructure lie near the eastern segment of the Aleutian Trench that ruptured in the 1964 earthquake. Although the Great Alaska Earthquake was tragic because of the loss of life and property, it provided a wealth of data about subductionzone earthquakes and the hazards they pose. The leap in scientific understanding that followed the 1964 earthquake has led to major breakthroughs in earth science research worldwide over the past half century. This fact sheet commemorates Great Alaska Earthquake and

Twitter Seismology: Earthquake Monitoring and Response in a Social World

NASA Astrophysics Data System (ADS)

Bowden, D. C.; Earle, P. S.; Guy, M.; Smoczyk, G.

2011-12-01

The U.S. Geological Survey (USGS) is investigating how the social networking site Twitter, a popular service for sending and receiving short, public, text messages, can augment USGS earthquake response products and the delivery of hazard information. The potential uses of Twitter for earthquake response include broadcasting earthquake alerts, rapidly detecting widely felt events, qualitatively assessing earthquake damage effects, communicating with the public, and participating in post-event collaboration. Several seismic networks and agencies are currently distributing Twitter earthquake alerts including the European-Mediterranean Seismological Centre (@LastQuake), Natural Resources Canada (@CANADAquakes), and the Indonesian meteorological agency (@infogempabmg); the USGS will soon distribute alerts via the @USGSted and @USGSbigquakes Twitter accounts. Beyond broadcasting alerts, the USGS is investigating how to use tweets that originate near the epicenter to detect and characterize shaking events. This is possible because people begin tweeting immediately after feeling an earthquake, and their short narratives and exclamations are available for analysis within 10's of seconds of the origin time. Using five months of tweets that contain the word "earthquake" and its equivalent in other languages, we generate a tweet-frequency time series. The time series clearly shows large peaks correlated with the origin times of widely felt events. To identify possible earthquakes, we use a simple Short-Term-Average / Long-Term-Average algorithm similar to that commonly used to detect seismic phases. As with most auto-detection algorithms, the parameters can be tuned to catch more or less events at the cost of more or less false triggers. When tuned to a moderate sensitivity, the detector found 48 globally-distributed, confirmed seismic events with only 2 false triggers. A space-shuttle landing and "The Great California ShakeOut" caused the false triggers. This number of

Waveforms clustering of small magnitude earthquakes recorded in the Northern Sicilian offshore: evidence of multiplets

NASA Astrophysics Data System (ADS)

D'Alessandro, A.; Mangano, G.; D'Anna, G.; Luzio, D.; Selvaggi, G.

2011-12-01

On September 6th 2002 the northern Sicily was hit by a strong earthquake (MW 5.9). In the following six months over a thousand aftershocks were located in the same area. On December 7th 2009, the INGV OBSLab deployed an OBS/H near the epicentral area of the main shock at a depth of 1500 m. The submarine station was recovered after 233 days. During the eight months of the experiment the OBS/H recorded about 250 small magnitude events of clear local origin. In order to identify seismic events generated by the same tectonic structure, we have applied a clustering technique based on the similarity of the waveforms. The similarity matrix was constructed using the maximum of the normalized cross-covariance function. To identify the multiplets, we used a clustering technique based on an agglomerative hierarchical algorithm, based on the nearest neighbor strategy. The results were summarized in the dendrogram of Fig. 1. The partitions have been obtained by "cutting" the dendrogram at a level of distance equal to 0.3. So we have identified 9 multiplets and some doublets and triplets. Fig. 2 shows as example the multiplet 1. The events of this cluster have a high level of similarity; 25 of the 31 micro-events are characterized by a similarity greater than 0.9. In order to locate the micro-earthquakes recorded by the OBS/H only a single station location technique was implemented and applied. Some multiplets have clouds of hypocenters overlapping each other. These clusters, indistinguishable without the application of a waveforms clustering technique, show differences in the waveforms that must be attributed to differences in focal mechanisms which generated the waveforms.

Development of a technique for long-term detection of precursors of strong earthquakes using high-resolution satellite images

NASA Astrophysics Data System (ADS)

Soto-Pinto, C. A.; Arellano-Baeza, A. A.; Ouzounov, D. P.

2012-12-01

Among a variety of processes involved in seismic activity, the principal process is the accumulation and relaxation of stress in the crust, which takes place at the depth of tens of kilometers. While the Earth's surface bears at most the indirect sings of the accumulation and relaxation of the crust stress, it has long been understood that there is a strong correspondence between the structure of the underlying crust and the landscape. We assume the structure of the lineaments reflects an internal structure of the Earth's crust, and the variation of the lineament number and arrangement reflects the changes in the stress patterns related to the seismic activity. Contrary to the existing assumptions that lineament structure changes only at the geological timescale, we have found that the much faster seismic activity strongly affects the system of lineaments extracted from the high-resolution multispectral satellite images. Previous studies have shown that accumulation of the stress in the crust previous to a strong earthquake is directly related to the number increment and preferential orientation of lineament configuration present in the satellite images of epicenter zones. This effect increases with the earthquake magnitude and can be observed approximately since one month before. To study in details this effect we have developed a software based on a series of algorithms for automatic detection of lineaments. It was found that the Hough transform implemented after the application of discontinuity detection mechanisms like Canny edge detector or directional filters is the most robust technique for detection and characterization of changes in the lineament patterns related to strong earthquakes, which can be used as a robust long-term precursor of earthquakes indicating regions of strong stress accumulation.

Geological and historical evidence of irregular recurrent earthquakes in Japan.

PubMed

Satake, Kenji

2015-10-28

Great (M∼8) earthquakes repeatedly occur along the subduction zones around Japan and cause fault slip of a few to several metres releasing strains accumulated from decades to centuries of plate motions. Assuming a simple 'characteristic earthquake' model that similar earthquakes repeat at regular intervals, probabilities of future earthquake occurrence have been calculated by a government committee. However, recent studies on past earthquakes including geological traces from giant (M∼9) earthquakes indicate a variety of size and recurrence interval of interplate earthquakes. Along the Kuril Trench off Hokkaido, limited historical records indicate that average recurrence interval of great earthquakes is approximately 100 years, but the tsunami deposits show that giant earthquakes occurred at a much longer interval of approximately 400 years. Along the Japan Trench off northern Honshu, recurrence of giant earthquakes similar to the 2011 Tohoku earthquake with an interval of approximately 600 years is inferred from historical records and tsunami deposits. Along the Sagami Trough near Tokyo, two types of Kanto earthquakes with recurrence interval of a few hundred years and a few thousand years had been recognized, but studies show that the recent three Kanto earthquakes had different source extents. Along the Nankai Trough off western Japan, recurrence of great earthquakes with an interval of approximately 100 years has been identified from historical literature, but tsunami deposits indicate that the sizes of the recurrent earthquakes are variable. Such variability makes it difficult to apply a simple 'characteristic earthquake' model for the long-term forecast, and several attempts such as use of geological data for the evaluation of future earthquake probabilities or the estimation of maximum earthquake size in each subduction zone are being conducted by government committees. © 2015 The Author(s).

Application of τc*Pd in earthquake early warning

NASA Astrophysics Data System (ADS)

Huang, Po-Lun; Lin, Ting-Li; Wu, Yih-Min

2015-03-01

Rapid assessment of damage potential and size of an earthquake at the station is highly demanded for onsite earthquake early warning. We study the application of τc*Pd for its estimation on the earthquake size using 123 events recorded by the borehole stations of KiK-net in Japan. The new type of earthquake size determined by τc*Pd is more related to the damage potential. We find that τc*Pd provides another parameter to measure the size of earthquake and the threshold to warn strong ground motion.

Ionospheric detection of tsunami earthquakes: observation, modeling and ideas for future early warning

NASA Astrophysics Data System (ADS)

Occhipinti, G.; Manta, F.; Rolland, L.; Watada, S.; Makela, J. J.; Hill, E.; Astafieva, E.; Lognonne, P. H.

2017-12-01

Detection of ionospheric anomalies following the Sumatra and Tohoku earthquakes (e.g., Occhipinti 2015) demonstrated that ionosphere is sensitive to earthquake and tsunami propagation: ground and oceanic vertical displacement induces acoustic-gravity waves propagating within the neutral atmosphere and detectable in the ionosphere. Observations supported by modelling proved that ionospheric anomalies related to tsunamis are deterministic and reproducible by numerical modeling via the ocean/neutral-atmosphere/ionosphere coupling mechanism (Occhipinti et al., 2008). To prove that the tsunami signature in the ionosphere is routinely detected we show here perturbations of total electron content (TEC) measured by GPS and following tsunamigenic earthquakes from 2004 to 2011 (Rolland et al. 2010, Occhipinti et al., 2013), nominally, Sumatra (26 December, 2004 and 12 September, 2007), Chile (14 November, 2007), Samoa (29 September, 2009) and the recent Tohoku-Oki (11 Mars, 2011). Based on the observations close to the epicenter, mainly performed by GPS networks located in Sumatra, Chile and Japan, we highlight the TEC perturbation observed within the first 8 min after the seismic rupture. This perturbation contains information about the ground displacement, as well as the consequent sea surface displacement resulting in the tsunami. In addition to GNSS-TEC observations close to the epicenter, new exciting measurements in the far-field were performed by airglow measurement in Hawaii show the propagation of the internal gravity waves induced by the Tohoku tsunami (Occhipinti et al., 2011). This revolutionary imaging technique is today supported by two new observations of moderate tsunamis: Queen Charlotte (M: 7.7, 27 October, 2013) and Chile (M: 8.2, 16 September 2015). We finally detail here our recent work (Manta et al., 2017) on the case of tsunami alert failure following the Mw7.8 Mentawai event (25 October, 2010), and its twin tsunami alert response following the Mw7

Dense Array Studies of Volcano-Tectonic and Long-Period Earthquakes Beneath Mount St. Helens

NASA Astrophysics Data System (ADS)

Glasgow, M. E.; Hansen, S. M.; Schmandt, B.; Thomas, A.

2017-12-01

A 904 single-component 10-Hz geophone array deployed within 15 km of Mount St. Helens (MSH) in 2014 recorded continuously for two-weeks. Automated reverse-time imaging (RTI) was used to generate a catalog of 212 earthquakes. Among these, two distinct types of upper crustal (<8 km) earthquakes were classified. Volcano-tectonic (VT) and long-period (LP) earthquakes were identified using analysis of array spectrograms, envelope functions, and velocity waveforms. To remove analyst subjectivity, quantitative classification criteria were developed based on the ratio of power in high and low frequency bands and coda duration. Prior to the 2014 experiment, upper crustal LP earthquakes had only been reported at MSH during volcanic activity. Subarray beamforming was used to distinguish between LP earthquakes and surface generated LP signals, such as rockfall. This method confirmed 16 LP signals with horizontal velocities exceeding that of upper crustal P-wave velocities, which requires a subsurface hypocenter. LP and VT locations overlap in a cluster slightly east of the summit crater from 0-5 km below sea level. LP displacement spectra are similar to simple theoretical predictions for shear failure except that they have lower corner frequencies than VT earthquakes of similar magnitude. The results indicate a distinct non-resonant source for LP earthquakes which are located in the same source volume as some VT earthquakes (within hypocenter uncertainty of 1 km or less). To further investigate MSH microseismicity mechanisms, a 142 three-component (3-C) 5 Hz geophone array will record continuously for one month at MSH in Fall 2017 providing a unique dataset for a volcano earthquake source study. This array will help determine if LP occurrence in 2014 was transient or if it is still ongoing. Unlike the 2014 array, approximately 50 geophones will be deployed in the MSH summit crater directly over the majority of seismicity. RTI will be used to detect and locate earthquakes by

Improvement of a picking algorithm real-time P-wave detection by kurtosis

NASA Astrophysics Data System (ADS)

Ishida, H.; Yamada, M.

2016-12-01

Earthquake early warning (EEW) requires fast and accurate P-wave detection. The current EEW system in Japan uses the STA/LTAalgorithm (Allen, 1978) to detect P-wave arrival.However, some stations did not trigger during the 2011 Great Tohoku Earthquake due to the emergent onset. In addition, accuracy of the P-wave detection is very important: on August 1, 2016, the EEW issued a false alarm with M9 in Tokyo region due to a thunder noise.To solve these problems, we use a P-wave detection method using kurtosis statistics. It detects the change of statistic distribution of the waveform amplitude. This method was recently developed (Saragiotis et al., 2002) and used for off-line analysis such as making seismic catalogs. To apply this method for EEW, we need to remove an acausal calculation and enable a real-time processing. Here, we propose a real-time P-wave detection method using kurtosis statistics with a noise filter.To avoid false triggering by a noise, we incorporated a simple filter to classify seismic signal and noise. Following Kong et al. (2016), we used the interquartilerange and zero cross rate for the classification. The interquartile range is an amplitude measure that is equal to the middle 50% of amplitude in a certain time window. The zero cross rate is a simple frequency measure that counts the number of times that the signal crosses baseline zero. A discriminant function including these measures was constructed by the linear discriminant analysis.To test this kurtosis method, we used strong motion records for 62 earthquakes between April, 2005 and July, 2015, which recorded the seismic intensity greater equal to 6 lower in the JMA intensity scale. The records with hypocentral distance < 200km were used for the analysis. An attached figure shows the error of P-wave detection speed for STA/LTA and kurtosis methods against manual picks. It shows that the median error is 0.13 sec and 0.035 sec for STA/LTA and kurtosis method. The kurtosis method tends to be

Earthquakes along the Azores-Iberia plate boundary revisited

NASA Astrophysics Data System (ADS)

Batlló, Josep; Matos, Catarina; Torres, Ricardo; Cruz, Jorge; Custódio, Susana

2017-04-01

The plate boundary that separates the Eurasian and African plates between the Azores triple junction and Gibraltar has unleashed some of the highest magnitude earthquakes in Europe in the historical and instrumental periods, including the 1755 great Lisbon earthquake with an estimated magnitude of M8.5-8.7, a M8.3 earthquake in 1941 in a transform oceanic fault, a M8.1 fault in 1975 in an oceanic intraplate domain, and a M7.9 earthquake in 1969 offshore SW Portugal. The plate boundary evolves from a divergent boundary in the east - the Azores domain - through a strike-slip domain at the center - the Gloria fault domain - to an oblique convergence domain in the west - west Iberia and its oceanic margin. A proper mapping of the seismicity along this plate boundary is key to better understanding it. Prior to the early eighties, many earthquakes with epicentre in the Atlantic and even in mainland Portugal were undetected or not located instrumentally. However knowledge of the occurrence and location of earthquakes prior to this period is critical to understanding the seismicity of the region and for the assessment of seismic hazard and risk. The relocation of events recorded instrumentally until 1960 is particularly difficult due to the poor sensitivity of the seismographs, few available stations, incompleteness of the reports and lack of accuracy of station chronometers. Thus, different catalogues often provide different locations for the same event, with no information about how they were obtained. On the other hand, there are also conspicuous gaps in the instrumental records of some Portuguese stations. For many earthquakes of the studied period records rely solely on felt effects. In general, a good control on the accuracy or quality of epicenters lacks. Here we present a review of the locations of instrumental earthquakes of the Azores-west Iberia region in the period 1900-1960. In total, we reviewed around 350 earthquakes. More than 160 additional events have

Random variability explains apparent global clustering of large earthquakes

USGS Publications Warehouse

Michael, A.J.

2011-01-01

The occurrence of 5 Mw ≥ 8.5 earthquakes since 2004 has created a debate over whether or not we are in a global cluster of large earthquakes, temporarily raising risks above long-term levels. I use three classes of statistical tests to determine if the record of M ≥ 7 earthquakes since 1900 can reject a null hypothesis of independent random events with a constant rate plus localized aftershock sequences. The data cannot reject this null hypothesis. Thus, the temporal distribution of large global earthquakes is well-described by a random process, plus localized aftershocks, and apparent clustering is due to random variability. Therefore the risk of future events has not increased, except within ongoing aftershock sequences, and should be estimated from the longest possible record of events.

Systematic Detection of Remotely Triggered Seismicity in Africa Following Recent Large Earthquakes

NASA Astrophysics Data System (ADS)

Ayorinde, A. O.; Peng, Z.; Yao, D.; Bansal, A. R.

2016-12-01

It is well known that large distant earthquakes can trigger micro-earthquakes/tectonic tremors during or immediately following their surface waves. Globally, triggered earthquakes have been mostly found in active plate boundary regions. It is not clear whether they could occur within stable intraplate regions in Africa as well as the active East African Rift Zone. In this study we conduct a systematic study of remote triggering in Africa following recent large earthquakes, including the 2004 Mw9.1 Sumatra and 2012 Mw8.6 Indian Ocean earthquakes. In particular, the 2012 Indian Ocean earthquake is the largest known strike slip earthquake and has triggered a global increase of magnitude larger than 5.5 earthquakes as well as numerous micro-earthquakes/tectonic tremors around the world. The entire Africa region was examined for possible remotely triggered seismicity using seismic data downloaded from the Incorporated Research Institutes for Seismology (IRIS) Data Management Center (DMC) and GFZ German Research Center for Geosciences. We apply a 5-Hz high-pass-filter to the continuous waveforms and visually identify high-frequency signals during and immediately after the large amplitude surface waves. Spectrograms are computed as additional tools to identify triggered seismicities and we further confirm them by statistical analysis comparing the high-frequency signals before and after the distant mainshocks. So far we have identified possible triggered seismicity in Botswana and northern Madagascar. This study could help to understand dynamic triggering in diverse tectonic settings of the African continent.

A 3000-year record of ground-rupturing earthquakes along the central North Anatolian fault near Lake Ladik, Turkey

USGS Publications Warehouse

Fraser, J.; Pigati, J.S.; Hubert-Ferrari, A.; Vanneste, K.; Avsar, U.; Altinok, S.

2009-01-01

The North Anatolian fault (NAF) is a ???1500 km long, arcuate, dextral strike-slip fault zone in northern Turkey that extends from the Karliova triple junction to the Aegean Sea. East of Bolu, the fault zone exhibits evidence of a sequence of large (Mw >7) earthquakes that occurred during the twentieth century that displayed a migrating earthquake sequence from east to west. Prolonged human occupation in this region provides an extensive, but not exhaustive, historical record of large earthquakes prior to the twentieth century that covers much of the last 2000 yr. In this study, we extend our knowledge of rupture events in the region by evaluating the stratigraphy and chronology of sediments exposed in a paleoseismic trench across a splay of the NAF at Destek, ???6:5 km east of Lake Ladik (40.868?? N, 36.121?? E). The trenched fault strand forms an uphill-facing scarp and associated sediment trap below a small catchment area. The trench exposed a narrow fault zone that has juxtaposed a sequence of weakly defined paleosols interbedded with colluvium against highly fractured bedrock. We mapped magnetic susceptibility variations on the trench walls and found evidence for multiple visually unrecognized colluvial wedges. This technique was also used to constrain a predominantly dip-slip style of displacement on this fault splay. Sediments exposed in the trench were dated using both charcoal and terrestrial gastropod shells to constrain the timing of the earthquake events. While the gastropod shells consistently yielded 14 C ages that were too old (by ???900 yr), we obtained highly reliable 14 C ages from the charcoal by dating multiple components of the sample material. Our radiocarbon chronology constrains the timing of seven large earthquakes over the past 3000 yr prior to the 1943 Tosya earthquake, including event ages of (2?? error): A.D. 1437-1788, A.D. 1034-1321, A.D. 549-719, A.D. 17-585 (1-3 events), 35 B.C.-A.D. 28, 700-392 B.C., 912-596 B.C. Our results

New earthquake catalog reexamines Hawaii's seismic history

USGS Publications Warehouse

Wright, Thomas L.; Klein, Fred W.

2000-01-01

On April 2,1868, an earthquake of magnitude 7.9 occurred beneath the southern part of the island of Hawaii. The quake, which was felt throughout all of the Hawaiian Islands, had a Modified Mercalli (MM) intensity of XII near its source.The destruction caused by a quake that large is nearly complete. A landslide triggered by the quake buried a small village, killing 31 people, and a tsunami that swept over coastal settlements added to the death toll. We know as much as we do about this and other early earthquakes thanks to detailed records kept by Hawaiian missionaries, including the remarkable diary maintained by the Lyman family that documented every earthquake felt at their home in Hilo between 1833 and 1917 [Wyss et al., 1992].Our analysis of these and other historical records indicates that Hawaii was at least as intensely seismic in the 19th century and first half of the 20th century as in its more recent past, with 26 M ≥6.0 earthquakes occurring from 1823 to 1903 and 20 M ≥6.0 earthquakes from 1904 to 1959. Just five M ≥6.0 earthquakes occurred from 1960 to 1999. The potential damage caused by a repeat of some of the larger historic events could be catastrophic today.

Crustal deformation associated with an M8.1 earthquake in the Solomon Islands, detected by ALOS/PALSAR

NASA Astrophysics Data System (ADS)

Miyagi, Yousuke; Ozawa, Taku; Shimada, Masanobu

2009-10-01

On April 1, 2007 (UTC), a large Mw 8.1 interplate earthquake struck the Solomon Islands subduction zone where complicated tectonics result from the subduction of four plates. Extensive ground movements and a large tsunami occurred in the epicentral area causing severe damage over a wide area. Using ALOS/PALSAR data and the DInSAR technique, we detected crustal deformation exceeding 2 m in islands close to the epicenter. A slip distribution of the inferred seismic fault was estimated using geodetic information derived from DInSAR processing and field investigations. The result indicates large slip areas around the hypocenter and the centroid. It is possible that the largest slip area is related to subduction of the plate boundary between the Woodlark and Australian plates. A small slip area between those large slip areas may indicate weak coupling due to thermal activity related to volcanic activity on Simbo Island. The 2007 earthquake struck an area where large earthquake has not occurred since 1970. Most of this seismic gap was filled by the 2007 events, however a small seismic gap still remains in the southeastern region of the 2007 earthquake.

Earthquake response analysis of 11-story RC building that suffered damage in 2011 East Japan Earthquake

NASA Astrophysics Data System (ADS)

Shibata, Akenori; Masuno, Hidemasa

2017-10-01

An eleven-story RC apartment building suffered medium damage in the 2011 East Japan earthquake and was retrofitted for re-use. Strong motion records were obtained near the building. This paper discusses the inelastic earthquake response analysis of the building using the equivalent single-degree-of-freedom (1-DOF) system to account for the features of damage. The method of converting the building frame into 1-DOF system with tri-linear reducing-stiffness restoring force characteristics was given. The inelastic response analysis of the building against the earthquake using the inelastic 1-DOF equivalent system could interpret well the level of actual damage.

Recurrent slow slip event likely hastened by the 2011 Tohoku earthquake

PubMed Central

Hirose, Hitoshi; Kimura, Hisanori; Enescu, Bogdan; Aoi, Shin

2012-01-01

Slow slip events (SSEs) are another mode of fault deformation than the fast faulting of regular earthquakes. Such transient episodes have been observed at plate boundaries in a number of subduction zones around the globe. The SSEs near the Boso Peninsula, central Japan, are among the most documented SSEs, with the longest repeating history, of almost 30 y, and have a recurrence interval of 5 to 7 y. A remarkable characteristic of the slow slip episodes is the accompanying earthquake swarm activity. Our stable, long-term seismic observations enable us to detect SSEs using the recorded earthquake catalog, by considering an earthquake swarm as a proxy for a slow slip episode. Six recurrent episodes are identified in this way since 1982. The average duration of the SSE interoccurrence interval is 68 mo; however, there are significant fluctuations from this mean. While a regular cycle can be explained using a simple physical model, the mechanisms that are responsible for the observed fluctuations are poorly known. Here we show that the latest SSE in the Boso Peninsula was likely hastened by the stress transfer from the March 11, 2011 great Tohoku earthquake. Moreover, a similar mechanism accounts for the delay of an SSE in 1990 by a nearby earthquake. The low stress buildups and drops during the SSE cycle can explain the strong sensitivity of these SSEs to stress transfer from external sources. PMID:22949688

The EM Earthquake Precursor

NASA Astrophysics Data System (ADS)

Jones, K. B., II; Saxton, P. T.

2013-12-01

Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After the 1989 Loma Prieta Earthquake, American earthquake investigators predetermined magnetometer use and a minimum earthquake magnitude necessary for EM detection. This action was set in motion, due to the extensive damage incurred and public outrage concerning earthquake forecasting; however, the magnetometers employed, grounded or buried, are completely subject to static and electric fields and have yet to correlate to an identifiable precursor. Secondly, there is neither a networked array for finding any epicentral locations, nor have there been any attempts to find even one. This methodology needs dismissal, because it is overly complicated, subject to continuous change, and provides no response time. As for the minimum magnitude threshold, which was set at M5, this is simply higher than what modern technological advances have gained. Detection can now be achieved at approximately M1, which greatly improves forecasting chances. A propagating precursor has now been detected in both the field and laboratory. Field antenna testing conducted outside the NE Texas town of Timpson in February, 2013, detected three strong EM sources along with numerous weaker signals. The antenna had mobility, and observations were noted for recurrence, duration, and frequency response. Next, two

Lacustrine Paleoseismology Reveals Earthquake Segmentation of the Alpine Fault, New Zealand

NASA Astrophysics Data System (ADS)

Howarth, J. D.; Fitzsimons, S.; Norris, R.; Langridge, R. M.

2013-12-01

Transform plate boundary faults accommodate high rates of strain and are capable of producing large (Mw>7.0) to great (Mw>8.0) earthquakes that pose significant seismic hazard. The Alpine Fault in New Zealand is one of the longest, straightest and fastest slipping plate boundary transform faults on Earth and produces earthquakes at quasi-periodic intervals. Theoretically, the fault's linearity, isolation from other faults and quasi-periodicity should promote the generation of earthquakes that have similar magnitudes over multiple seismic cycles. We test the hypothesis that the Alpine Fault produces quasi-regular earthquakes that contiguously rupture the southern and central fault segments, using a novel lacustrine paleoseismic proxy to reconstruct spatial and temporal patterns of fault rupture over the last 2000 years. In three lakes located close to the Alpine Fault the last nine earthquakes are recorded as megaturbidites formed by co-seismic subaqueous slope failures, which occur when shaking exceeds Modified Mercalli (MM) VII. When the fault ruptures adjacent to a lake the co-seismic megaturbidites are overlain by stacks of turbidites produced by enhanced fluvial sediment fluxes from earthquake-induced landslides. The turbidite stacks record shaking intensities of MM>IX in the lake catchments and can be used to map the spatial location of fault rupture. The lake records can be dated precisely, facilitating meaningful along strike correlations, and the continuous records allow earthquakes closely spaced in time on adjacent fault segments to be distinguished. The results show that while multi-segment ruptures of the Alpine Fault occurred during most seismic cycles, sequential earthquakes on adjacent segments and single segment ruptures have also occurred. The complexity of the fault rupture pattern suggests that the subtle variations in fault geometry, sense of motion and slip rate that have been used to distinguish the central and southern segments of the Alpine

Characteristics of strong ground motion generation areas by fully dynamic earthquake cycles

NASA Astrophysics Data System (ADS)

Galvez, P.; Somerville, P.; Ampuero, J. P.; Petukhin, A.; Yindi, L.

2016-12-01

During recent subduction zone earthquakes (2010 Mw 8.8 Maule and 2011 Mw 9.0 Tohoku), high frequency ground motion radiation has been detected in deep regions of seismogenic zones. By semblance analysis of wave packets, Kurahashi & Irikura (2013) found strong ground motion generation areas (SMGAs) located in the down dip region of the 2011 Tohoku rupture. To reproduce the rupture sequence of SMGA's and replicate their rupture time and ground motions, we extended previous work on dynamic rupture simulations with slip reactivation (Galvez et al, 2016). We adjusted stresses on the most southern SMGAs of Kurahashi & Irikura (2013) model to reproduce the observed peak ground velocity recorded at seismic stations along Japan for periods up to 5 seconds. To generate higher frequency ground motions we input the rupture time, final slip and slip velocity of the dynamic model into the stochastic ground motion generator of Graves & Pitarka (2010). Our results are in agreement with the ground motions recorded at the KiK-net and K-NET stations.While we reproduced the recorded ground motions of the 2011 Tohoku event, it is unknown whether the characteristics and location of SMGA's will persist in future large earthquakes in this region. Although the SMGA's have large peak slip velocities, the areas of largest final slip are located elsewhere. To elucidate whether this anti-correlation persists in time, we conducted earthquake cycle simulations and analysed the spatial correlation of peak slip velocities, stress drops and final slip of main events. We also investigated whether or not the SMGA's migrate to other regions of the seismic zone.To perform this study, we coupled the quasi-dynamic boundary element solver QDYN (Luo & Ampuero, 2015) and the dynamic spectral element solver SPECFEM3D (Galvez et al., 2014; 2016). The workflow alternates between inter-seismic periods solved with QDYN and coseismic periods solved with SPECFEM3D, with automated switch based on slip rate

Earthquake location in island arcs

USGS Publications Warehouse

Engdahl, E.R.; Dewey, J.W.; Fujita, K.

1982-01-01

-velocity lithospheric slab. In application, JHD has the practical advantage that it does not require the specification of a theoretical velocity model for the slab. Considering earthquakes within a 260 km long by 60 km wide section of the Aleutian main thrust zone, our results suggest that the theoretical velocity structure of the slab is presently not sufficiently well known that accurate locations can be obtained independently of locally recorded data. Using a locally recorded earthquake as a calibration event, JHD gave excellent results over the entire section of the main thrust zone here studied, without showing a strong effect that might be attributed to spatially varying source-station anomalies. We also calibrated the ray-tracing method using locally recorded data and obtained results generally similar to those obtained by JHD. ?? 1982.

Seismo-ionospheric anomalies in total electron content of the GIM and electron density of DEMETER before the 27 February 2010 M8.8 Chile earthquake

NASA Astrophysics Data System (ADS)

Ho, Yi-Ying; Jhuang, Hau-Kun; Su, Yung-Chih; Liu, Jann-Yenq

2013-06-01

In this paper we examine the pre-earthquake ionospheric anomalies by the total electron content (TEC) extracted from GIM (global ionospheric map) and the electron density (Ne) observed by the DEMETER (Detection of Electro-Magnetic Emissions Transmitted from Earthquake Regions) satellite during the 2010 M8.8 Chile earthquake. Temporal variations show the nighttime TEC and Ne simultaneously increase 9-19 days before the earthquake. A cross-comparison of data recorded during the period of 1 February to 3 March in 2006-2010 confirms the above temporal anomalies specifically appear in 2010. The spatial analyses show that the anomalies tend to appear over the epicenter.

Pre-Earthquake Unipolar Electromagnetic Pulses

NASA Astrophysics Data System (ADS)

Scoville, J.; Freund, F.

2013-12-01

Transient ultralow frequency (ULF) electromagnetic (EM) emissions have been reported to occur before earthquakes [1,2]. They suggest powerful transient electric currents flowing deep in the crust [3,4]. Prior to the M=5.4 Alum Rock earthquake of Oct. 21, 2007 in California a QuakeFinder triaxial search-coil magnetometer located about 2 km from the epicenter recorded unusual unipolar pulses with the approximate shape of a half-cycle of a sine wave, reaching amplitudes up to 30 nT. The number of these unipolar pulses increased as the day of the earthquake approached. These pulses clearly originated around the hypocenter. The same pulses have since been recorded prior to several medium to moderate earthquakes in Peru, where they have been used to triangulate the location of the impending earthquakes [5]. To understand the mechanism of the unipolar pulses, we first have to address the question how single current pulses can be generated deep in the Earth's crust. Key to this question appears to be the break-up of peroxy defects in the rocks in the hypocenter as a result of the increase in tectonic stresses prior to an earthquake. We investigate the mechanism of the unipolar pulses by coupling the drift-diffusion model of semiconductor theory to Maxwell's equations, thereby producing a model describing the rock volume that generates the pulses in terms of electromagnetism and semiconductor physics. The system of equations is then solved numerically to explore the electromagnetic radiation associated with drift-diffusion currents of electron-hole pairs. [1] Sharma, A. K., P. A. V., and R. N. Haridas (2011), Investigation of ULF magnetic anomaly before moderate earthquakes, Exploration Geophysics 43, 36-46. [2] Hayakawa, M., Y. Hobara, K. Ohta, and K. Hattori (2011), The ultra-low-frequency magnetic disturbances associated with earthquakes, Earthquake Science, 24, 523-534. [3] Bortnik, J., T. E. Bleier, C. Dunson, and F. Freund (2010), Estimating the seismotelluric current

Detection of postseismic fault-zone collapse following the Landers earthquake

USGS Publications Warehouse

Massonnet, D.; Thatcher, W.; Vadon, H.

1996-01-01

Stress changes caused by fault movement in an earthquake induce transient aseismic crustal movements in the earthquake source region that continue for months to decades following large events. These motions reflect aseismic adjustments of the fault zone and/or bulk deformation of the surroundings in response to applied stresses, and supply information regarding the inelastic behaviour of the Earth's crust. These processes are imperfectly understood because it is difficult to infer what occurs at depth using only surface measurements, which are in general poorly sampled. Here we push satellite radar interferometry to near its typical artefact level, to obtain a map of the postseismic deformation field in the three years following the 28 June 1992 Landers, California earthquake. From the map, we deduce two distinct types of deformation: afterslip at depth on the fault that ruptured in the earthquake, and shortening normal to the fault zone. The latter movement may reflect the closure of dilatant cracks and fluid expulsion from a transiently over-pressured fault zone.

Understanding Earthquakes

ERIC Educational Resources Information Center

Davis, Amanda; Gray, Ron

2018-01-01

December 26, 2004 was one of the deadliest days in modern history, when a 9.3 magnitude earthquake--the third largest ever recorded--struck off the coast of Sumatra in Indonesia (National Centers for Environmental Information 2014). The massive quake lasted at least 10 minutes and devastated the Indian Ocean. The quake displaced an estimated…

Earthquake damage orientation to infer seismic parameters in archaeological sites and historical earthquakes

NASA Astrophysics Data System (ADS)

Martín-González, Fidel

2018-01-01

Studies to provide information concerning seismic parameters and seismic sources of historical and archaeological seismic events are used to better evaluate the seismic hazard of a region. This is of especial interest when no surface rupture is recorded or the seismogenic fault cannot be identified. The orientation pattern of the earthquake damage (ED) (e.g., fallen columns, dropped key stones) that affected architectonic elements of cities after earthquakes has been traditionally used in historical and archaeoseismological studies to infer seismic parameters. However, in the literature depending on the authors, the parameters that can be obtained are contradictory (it has been proposed: the epicenter location, the orientation of the P-waves, the orientation of the compressional strain and the fault kinematics) and authors even question these relations with the earthquake damage. The earthquakes of Lorca in 2011, Christchurch in 2011 and Emilia Romagna in 2012 present an opportunity to measure systematically a large number and wide variety of earthquake damage in historical buildings (the same structures that are used in historical and archaeological studies). The damage pattern orientation has been compared with modern instrumental data, which is not possible in historical and archaeoseismological studies. From measurements and quantification of the orientation patterns in the studied earthquakes, it is observed that there is a systematic pattern of the earthquake damage orientation (EDO) in the proximity of the seismic source (fault trace) (<10 km). The EDO in these earthquakes is normal to the fault trend (±15°). This orientation can be generated by a pulse of motion that in the near fault region has a distinguishable acceleration normal to the fault due to the polarization of the S-waves. Therefore, the earthquake damage orientation could be used to estimate the seismogenic fault trend of historical earthquakes studies where no instrumental data are available.

Mexican Seismic Alert System's SAS-I algorithm review considering strong earthquakes felt in Mexico City since 1985

NASA Astrophysics Data System (ADS)

Cuellar Martinez, A.; Espinosa Aranda, J.; Suarez, G.; Ibarrola Alvarez, G.; Ramos Perez, S.; Camarillo Barranco, L.

2013-05-01

The Seismic Alert System of Mexico (SASMEX) uses three algorithms for alert activation that involve the distance between the seismic sensing field station (FS) and the city to be alerted; and the forecast for earthquake early warning activation in the cities integrated to the system, for example in Mexico City, the earthquakes occurred with the highest accelerations, were originated in the Pacific Ocean coast, whose distance this seismic region and the city, favors the use of algorithm called Algorithm SAS-I. This algorithm, without significant changes since its beginning in 1991, employs the data that generate one or more FS during P wave detection until S wave detection plus a period equal to the time employed to detect these phases; that is the double S-P time, called 2*(S-P). In this interval, the algorithm performs an integration process of quadratic samples from FS which uses a triaxial accelerometer to get two parameters: amplitude and growth rate measured until 2*(S-P) time. The parameters in SAS-I are used in a Magnitude classifier model, which was made from Guerrero Coast earthquakes time series, with reference to Mb magnitude mainly. This algorithm activates a Public or Preventive Alert if the model predicts whether Strong or Moderate earthquake. The SAS-I algorithm has been operating for over 23 years in the subduction zone of the Pacific Coast of Mexico, initially in Guerrero and followed by Oaxaca; and since March 2012 in the seismic region of Pacific covering the coasts among Jalisco, Colima, Michoacan, Guerrero and Oaxaca, where this algorithm has issued 16 Public Alert and 62 Preventive Alerts to the Mexico City where its soil conditions increase damages by earthquake such as the occurred in September 1985. This work shows the review of the SAS-I algorithm and possible alerts that it could generate from major earthquakes recordings detected by FS or seismometers near the earthquakes, coming from Pacific Ocean Coast whose have been felt in Mexico

Ionospheric Method of Detecting Tsunami-Generating Earthquakes.

ERIC Educational Resources Information Center

Najita, Kazutoshi; Yuen, Paul C.

1978-01-01

Reviews the earthquake phenomenon and its possible relation to ionospheric disturbances. Discusses the basic physical principles involved and the methods upon which instrumentation is being developed for possible use in a tsunami disaster warning system. (GA)

Thermal Alteration of Pyrite to Pyrrhotite During Earthquakes: New Evidence of Seismic Slip in the Rock Record

NASA Astrophysics Data System (ADS)

Yang, Tao; Dekkers, Mark J.; Chen, Jianye

2018-02-01

Seismic slip zones convey important information on earthquake energy dissipation and rupture processes. However, geological records of earthquakes along exhumed faults remain scarce. They can be traced with a variety of methods that establish the frictional heating of seismic slip, although each has certain assets and disadvantages. Here we describe a mineral magnetic method to identify seismic slip along with its peak temperature through examination of magnetic mineral assemblages within a fault zone in deep-sea sediments cored from the Japan Trench—one of the seismically most active regions around Japan—during the Integrated Ocean Drilling Program Expedition 343, the Japan Trench Fast Drilling Project. Fault zone sediments and adjacent host sediments were analyzed mineral magnetically, supplemented by scanning electron microscope observations with associated energy dispersive X-ray spectroscopy analyses. The presence of the magnetic mineral pyrrhotite appears to be restricted to three fault zones occurring at 697, 720, and 801 m below sea floor in the frontal prism sediments, while it is absent in the adjacent host sediments. Elevated temperatures and coseismic hot fluids as a consequence of frictional heating during earthquake rupture induced partial reaction of preexisting pyrite to pyrrhotite. The presence of pyrrhotite in combination with pyrite-to-pyrrhotite reaction kinetics constrains the peak temperature to between 640 and 800°C. The integrated mineral-magnetic, microscopic, and kinetic approach adopted here is a useful tool to identify seismic slip along faults without frictional melt and establish the associated maximum temperature.

Microearthquake networks and earthquake prediction

USGS Publications Warehouse

Lee, W.H.K.; Steward, S. W.

1979-01-01

A microearthquake network is a group of highly sensitive seismographic stations designed primarily to record local earthquakes of magnitudes less than 3. Depending on the application, a microearthquake network will consist of several stations or as many as a few hundred . They are usually classified as either permanent or temporary. In a permanent network, the seismic signal from each is telemetered to a central recording site to cut down on the operating costs and to allow more efficient and up-to-date processing of the data. However, telemetering can restrict the location sites because of the line-of-site requirement for radio transmission or the need for telephone lines. Temporary networks are designed to be extremely portable and completely self-contained so that they can be very quickly deployed. They are most valuable for recording aftershocks of a major earthquake or for studies in remote areas.  

Ionospheric Anomalies Related to the (M = 7.3), August 27, 2012, Puerto Earthquake, (M = 6.8), August 30, 2012 Jan Mayen Island Earthquake, and (M = 7.6), August 31, 2012, Philippines Earthquake: Two-Dimensional Principal Component Analysis

PubMed Central

Lin, Jyh-Woei

2013-01-01

Two-dimensional principal component analysis (2DPCA) and principal component analysis (PCA) are used to examine the ionospheric total electron content (TEC) data during the time period from 00:00 on August 21 to 12: 45 on August 31 (UT), which are 10 days before the M = 7.6 Philippines earthquake at 12:47:34 on August 31, 2012 (UT) with the depth at 34.9 km. From the results by using 2DPCA, a TEC precursor of Philippines earthquake is found during the time period from 4:25 to 4:40 on August 28, 2012 (UT) with the duration time of at least 15 minutes. Another earthquake-related TEC anomaly is detectable for the time period from 04:35 to 04:40 on August 27, 2012 (UT) with the duration time of at least 5 minutes during the Puerto earthquake at 04: 37:20 on August 27, 2012 (UT) (M w = 7.3) with the depth at 20.3 km. The precursor of the Puerto earthquake is not detectable. TEC anomaly is not to be found related to the Jan Mayen Island earthquake (M w = 6.8) at 13:43:24 on August 30, 2012 (UT). These earthquake-related TEC anomalies are detectable by using 2DPCA rather than PCA. They are localized nearby the epicenters of the Philippines and Puerto earthquakes. PMID:23844386

Source complexity of the 1987 Whittier Narrows, California, earthquake from the inversion of strong motion records

USGS Publications Warehouse

Hartzell, S.; Iida, M.

1990-01-01

Strong motion records for the Whittier Narrows earthquake are inverted to obtain the history of slip. Both constant rupture velocity models and variable rupture velocity models are considered. The results show a complex rupture process within a relatively small source volume, with at least four separate concentrations of slip. Two sources are associated with the hypocenter, the larger having a slip of 55-90 cm, depending on the rupture model. These sources have a radius of approximately 2-3 km and are ringed by a region of reduced slip. The aftershocks fall within this low slip annulus. Other sources with slips from 40 to 70 cm each ring the central source region and the aftershock pattern. All the sources are predominantly thrust, although some minor right-lateral strike-slip motion is seen. The overall dimensions of the Whittier earthquake from the strong motion inversions is 10 km long (along the strike) and 6 km wide (down the dip). The preferred dip is 30?? and the preferred average rupture velocity is 2.5 km/s. Moment estimates range from 7.4 to 10.0 ?? 1024 dyn cm, depending on the rupture model. -Authors

The Mw 7.7 Bhuj earthquake: Global lessons for earthquake hazard in intra-plate regions

USGS Publications Warehouse

Schweig, E.; Gomberg, J.; Petersen, M.; Ellis, M.; Bodin, P.; Mayrose, L.; Rastogi, B.K.

2003-01-01

The Mw 7.7 Bhuj earthquake occurred in the Kachchh District of the State of Gujarat, India on 26 January 2001, and was one of the most damaging intraplate earthquakes ever recorded. This earthquake is in many ways similar to the three great New Madrid earthquakes that occurred in the central United States in 1811-1812, An Indo-US team is studying the similarities and differences of these sequences in order to learn lessons for earthquake hazard in intraplate regions. Herein we present some preliminary conclusions from that study. Both the Kutch and New Madrid regions have rift type geotectonic setting. In both regions the strain rates are of the order of 10-9/yr and attenuation of seismic waves as inferred from observations of intensity and liquefaction are low. These strain rates predict recurrence intervals for Bhuj or New Madrid sized earthquakes of several thousand years or more. In contrast, intervals estimated from paleoseismic studies and from other independent data are significantly shorter, probably hundreds of years. All these observations together may suggest that earthquakes relax high ambient stresses that are locally concentrated by rheologic heterogeneities, rather than loading by plate-tectonic forces. The latter model generally underlies basic assumptions made in earthquake hazard assessment, that the long-term average rate of energy released by earthquakes is determined by the tectonic loading rate, which thus implies an inherent average periodicity of earthquake occurrence. Interpreting the observations in terms of the former model therefore may require re-examining the basic assumptions of hazard assessment.

Streamflow Changes Induced by the 1999 MW 7.6 Chi-Chi Earthquake

NASA Astrophysics Data System (ADS)

Chia, Yeeping; Liu, Ching-Yi; Chuang, Po-Yu

2016-04-01

Anomalous streamflow changes have often been observed after strong earthquakes. These changes have been used to study crustal deformation induced by earthquakes. Previous studies indicated that co-seismic groundwater-level changes, ranging from a fall of 11.1 m to a rise of 7.42 m, were recorded in 152 monitoring wells near the seismogenic fault during the 1999 MW 7.6 Chi-Chi earthquake. Here we report anomalous streamflow changes due to the earthquake in central Taiwan. There are 32 stream gauges in the vicinity of the fault, mostly in the mountainous hanging wall area. Of those, 22 recorded anomalous streamflow increases, ranging from 60% to 732%, one to four days after the earthquake. Unlike a rapid decrease in discharge after heavy rainfall, the post-seismic increase is followed by a slow decline which may last for several months. Only one gauge recorded a sudden decrease in discharge immediately after the earthquake. Besides, the decrease was preceded by a large and abrupt streamflow increase over the four days before the earthquake. We attribute the post-seismic increase to fracturing in the mountainous area due to seismic shaking, while the decrease to co-seismic pore pressure drop induced by crustal extension. However, more evidence is needed to consider the pre-seismic streamflow changes as a potential precursory indicator of earthquakes.

Autonomous acoustic recorders reveal complex patterns in avian detection probability

USGS Publications Warehouse

Thompson, Sarah J.; Handel, Colleen M.; McNew, Lance B.

2017-01-01

Avian point‐count surveys are typically designed to occur during periods when birds are consistently active and singing, but seasonal and diurnal patterns of detection probability are often not well understood and may vary regionally or between years. We deployed autonomous acoustic recorders to assess how avian availability for detection (i.e., the probability that a bird signals its presence during a recording) varied during the breeding season with time of day, date, and weather‐related variables at multiple subarctic tundra sites in Alaska, USA, 2013–2014. A single observer processed 2,692 10‐minute recordings across 11 site‐years. We used time‐removal methods to assess availability and used generalized additive models to examine patterns of detectability (joint probability of presence, availability, and detection) for 16 common species. Despite lack of distinct dawn or dusk, most species displayed circadian vocalization patterns, with detection rates generally peaking between 0800 hours and 1200 hours but remaining high as late as 2000 hours for some species. Between 2200 hours and 0500 hours, most species’ detection rates dropped to near 0, signaling a distinctive rest period. Detectability dropped sharply for most species in early July. For all species considered, time‐removal analysis indicated nearly 100% likelihood of detection during a 10‐minute recording conducted in June, between 0500 hours and 2000 hours. This indicates that non‐detections during appropriate survey times and dates were attributable to the species’ absence or that silent birds were unlikely to initiate singing during a 10‐minute interval, whereas vocally active birds were singing very frequently. Systematic recordings revealed a gradient of species’ presence at each site, from ubiquitous to incidental. Although the total number of species detected at a site ranged from 16 to 27, we detected only 4 to 15 species on ≥5% of the site's recordings. Recordings

Multi-segment earthquakes and tsunami potential of the Aleutian megathrust

USGS Publications Warehouse

Shennan, I.; Bruhn, R.; Plafker, G.

2009-01-01

Large to great earthquakes and related tsunamis generated on the Aleutian megathrust produce major hazards for both the area of rupture and heavily populated coastlines around much of the Pacific Ocean. Here we use paleoseismic records preserved in coastal sediments to investigate whether segment boundaries control the largest ruptures or whether in some seismic cycles segments combine to produce earthquakes greater than any observed since instrumented records began. Virtually the entire megathrust has ruptured since AD1900, with four different segments generating earthquakes >M8.0. The largest was the M9.2 great Alaska earthquake of March 1964 that ruptured ???800 km of the eastern segment of the megathrust. The tsunami generated caused fatalities in Alaska and along the coast as far south as California. East of the 1964 zone of deformation, the Yakutat microplate experienced two >M8.0 earthquakes, separated by a week, in September 1899. For the first time, we present evidence that earthquakes ???900 and ???1500 years ago simultaneously ruptured adjacent segments of the Aleutian megathrust and the Yakutat microplate, with a combined area ???15% greater than 1964, giving an earthquake of greater magnitude and increased tsunamigenic potential. ?? 2008 Elsevier Ltd. All rights reserved.

2016-2017 Update of Hydraulic Fracturing Induced Earthquakes near Fox Creek, Alberta

NASA Astrophysics Data System (ADS)

Wang, R.; Gu, Y. J.; Zhang, M.

2017-12-01

With a reported Richter magnitude (ML) of 4.8, the January 12, 2016 earthquake near Fox Creek is the largest event in Alberta during the past decade. This event led to the suspension of a nearby hydraulic fracturing well, in compliance with the provincial "traffic-light" protocol. In previous study, we examine the hypocenter location and focal mechanism of this earthquake, and the results support an anthropogenic origin. Since then (until August 2017), no event reached ML=4, while several ML>3 events occurred in the Fox Creek area. Their focal mechanisms are consistent with the ones from previous events that were induced by hydraulic fracturing, suggesting a strike-slip mechanism with either N-S or E-W trending fault. In 2017, the near-source station (distance <10 km) records around the ML 4.8 earthquake were released by the industry. To identify the true fault orientation(s), a waveform cross-correlation based analysis was conducted and over 1000 earthquakes with ML0 2 were identified within two weeks. The detected seismic swarm is closely distributed around the hydraulic fracturing well at 2.5-4.5 km depths, comparable to that of the injection (3.5 km). The spatial distribution of this earthquake cluster favors an N-S orientation of the reactivated faults, which is also supported by aeromagnetic and active-source seismic data. The temporal distribution of the seismicity indicates that the majority of these events took place during the stimulation phase, showing near-instantaneous response to the injection activity. Unlike an earlier (January 2015) earthquake swarm, the locations of these events are independent of injection phases (i.e., stimulation or shut-in). Finally, the b-value extracted from the detected cluster is close to one, which is comparable to natural earthquake sequences. In short, our updated study of the January 2016 sequence and recent events in 2017 offers new insights into the reactivated fault system and induced seismicity in the Fox Creek

One research from turkey on groundwater- level changes related earthquake

NASA Astrophysics Data System (ADS)

Kirmizitas, H.; Göktepe, G.

2003-04-01

Groundwater levels are recorded by limnigraphs in drilling wells in order to determine groundwater potential accurately and reliable under hydrogeological studies in Turkey State Haydraulic Works (DSI) set the limnigraphs to estimate mainly groundwater potential. Any well is drilled to determine and to obtain data on water level changes related earthquake up today. The main purpose of these studies are based on groundwater potential and to expose the hydrodynamic structure of an aquifer. In this study, abnormal oscillations, water rising and water drops were observed on graphs which is related with water level changes in groundwater. These observations showed that, some earthquakes has been effective on water level changes. There is a distance ranging to 2000 km between this epicentral and water wells. Water level changes occur in groundwater bearing layers that could be consisting of grained materials such as, alluvium or consolidated rocks such as, limestones. The biggest water level change is ranging to 1,48 m on diagrams and it is recorded as oscillation movement. Water level changes related earthquake are observed in different types of movements below in this research. 1-Rise-drop oscillation changes on same point. 2-Water level drop in certain periods or permanent periods after earthquakes. 3-Water level rise in certain periods or permanent periods after earthquakes. (For example, during Gölcük Earthquake with magnitude of 7.8 on August, 17, 1999 one artesian occured in DSI well ( 49160 numbered ) in Adapazari, Dernekkiri Village. Groundwater level changes might easily be changed because of atmosferic pressure that comes in first range, precipitation, irrigation or water pumping. Owing to relate groundwater level changes with earthquake on any time, such changes should be observed accurately, carefully and at right time. Thus, first of all, the real reason of this water level changes must be determined From 1970 to 2001 many earthquakes occured in Turkey

Surface seismic measurements of near-surface P-and S-wave seismic velocities at earthquake recording stations, Seattle, Washington

USGS Publications Warehouse

Williams, R.A.; Stephenson, W.J.; Frankel, A.D.; Odum, J.K.

1999-01-01

We measured P-and S-wave seismic velocities to about 40-m depth using seismic-refraction/reflection data on the ground surface at 13 sites in the Seattle, Washington, urban area, where portable digital seismographs recently recorded earthquakes. Sites with the lowest measured Vs correlate with highest ground motion amplification. These sites, such as at Harbor Island and in the Duwamish River industrial area (DRIA) south of the Kingdome, have an average Vs in the upper 30 m (V??s30) of 150 to 170 m/s. These values of V??s30 place these sites in soil profile type E (V??s30 < 180 m/s). A "rock" site, located at Seward Park on Tertiary sedimentary deposits, has a V??S30 of 433 m/s, which is soil type C (V??s30: 360 to 760 m/s). The Seward Park site V??s30 is about equal to, or up to 200 m/s slower than sites that were located on till or glacial outwash. High-amplitude P-and S-wave seismic reflections at several locations appear to correspond to strong resonances observed in earthquake spectra. An S-wave reflector at the Kingdome at about 17 to 22 m depth probably causes strong 2-Hz resonance that is observed in the earthquake data near the Kingdome.

Magnitude and intensity: Measures of earthquake size and severity

USGS Publications Warehouse

Spall, Henry

1982-01-01

Earthquakes can be measured in terms of either the amount of energy they release (magnitude) or the degree of ground shaking they cause at a particular locality (intensity).  Although magnitude and intensity are basically different measures of an earthquake, they are frequently confused by the public and new reports of earthquakes.  Part of the confusion probably arises from the general similarity of scales used express these quantities.  The various magnitude scales represent logarithmic expressions of the energy released by an earthquake.  Magnitude is calculated from the record made by an earthquake on a calibrated seismograph.  There are no upper or lower limits to magnitude, although no measured earthquakes have exceeded magnitude 8.9.

Stability assessment of structures under earthquake hazard through GRID technology

NASA Astrophysics Data System (ADS)

Prieto Castrillo, F.; Boton Fernandez, M.

2009-04-01

This work presents a GRID framework to estimate the vulnerability of structures under earthquake hazard. The tool has been designed to cover the needs of a typical earthquake engineering stability analysis; preparation of input data (pre-processing), response computation and stability analysis (post-processing). In order to validate the application over GRID, a simplified model of structure under artificially generated earthquake records has been implemented. To achieve this goal, the proposed scheme exploits the GRID technology and its main advantages (parallel intensive computing, huge storage capacity and collaboration analysis among institutions) through intensive interaction among the GRID elements (Computing Element, Storage Element, LHC File Catalogue, federated database etc.) The dynamical model is described by a set of ordinary differential equations (ODE's) and by a set of parameters. Both elements, along with the integration engine, are encapsulated into Java classes. With this high level design, subsequent improvements/changes of the model can be addressed with little effort. In the procedure, an earthquake record database is prepared and stored (pre-processing) in the GRID Storage Element (SE). The Metadata of these records is also stored in the GRID federated database. This Metadata contains both relevant information about the earthquake (as it is usual in a seismic repository) and also the Logical File Name (LFN) of the record for its later retrieval. Then, from the available set of accelerograms in the SE, the user can specify a range of earthquake parameters to carry out a dynamic analysis. This way, a GRID job is created for each selected accelerogram in the database. At the GRID Computing Element (CE), displacements are then obtained by numerical integration of the ODE's over time. The resulting response for that configuration is stored in the GRID Storage Element (SE) and the maximum structure displacement is computed. Then, the corresponding

Strong nonlinear dependence of the spectral amplification factors of deep Vrancea earthquakes magnitude

NASA Astrophysics Data System (ADS)

Marmureanu, Gheorghe; Ortanza Cioflan, Carmen; Marmureanu, Alexandru

2010-05-01

Nonlinear effects in ground motion during large earthquakes have long been a controversial issue between seismologists and geotechnical engineers. Aki wrote in 1993:"Nonlinear amplification at sediments sites appears to be more pervasive than seismologists used to think…Any attempt at seismic zonation must take into account the local site condition and this nonlinear amplification( Local site effects on weak and strong ground motion, Tectonophysics,218,93-111). In other words, the seismological detection of the nonlinear site effects requires a simultaneous understanding of the effects of earthquake source, propagation path and local geological site conditions. The difficulty for seismologists in demonstrating the nonlinear site effects has been due to the effect being overshadowed by the overall patterns of shock generation and path propagation. The researchers from National Institute for Earth Physics ,in order to make quantitative evidence of large nonlinear effects, introduced the spectral amplification factor (SAF) as ratio between maximum spectral absolute acceleration (Sa), relative velocity (Sv) , relative displacement (Sd) from response spectra for a fraction of critical damping at fundamental period and peak values of acceleration(a-max),velocity (v-max) and displacement (d-max),respectively, from processed strong motion record and pointed out that there is a strong nonlinear dependence on earthquake magnitude and site conditions.The spectral amplification factors(SAF) are finally computed for absolute accelerations at 5% fraction of critical damping (β=5%) in five seismic stations: Bucharest-INCERC(soft soils, quaternary layers with a total thickness of 800 m);Bucharest-Magurele (dense sand and loess on 350m); Cernavoda Nuclear Power Plant site (marl, loess, limestone on 270 m) Bacau(gravel and loess on 20m) and Iassy (loess, sand, clay, gravel on 60 m) for last strong and deep Vrancea earthquakes: March 4,1977 (MGR =7.2 and h=95 km);August 30

Site Response for Micro-Zonation from Small Earthquakes

NASA Astrophysics Data System (ADS)

Gospe, T. B.; Hutchings, L.; Liou, I. Y. W.; Jarpe, S.

2017-12-01

We have developed a method to obtain absolute geologic site response from small earthquakes using inexpensive instrumentation that enables us to perform micro-zonation inexpensively and in a short amount of time. We record small earthquakes (M<3) at several sites simultaneously and perform inversion to obtain actual absolute site response. The key to the inversion is that recordings at several stations from an earthquake have the same moment, source corner frequency and whole path Q effect on their spectra, but have individual Kappa and spectral amplification as a function of frequency. When these source and path effects are removed and corrections for different propagation distances are performed, we are left with actual site response. We develop site response functions from 0.5 to 25.0 Hz. Cities situated near active and dangerous faults experience small earthquakes on a regular basis. We typically record at least ten small earthquakes over time to stabilize the uncertainly. Of course, dynamic soil modeling is necessary to scale our linear site response to non-linear regime for large earthquakes. Our instrumentation is very inexpensive and virtually disposable, and can be placed throughout a city at a high density. Operation only requires turning on a switch, and data processing is automated to minimize human labor. We have installed a test network and implemented our full methodology in upper Napa Valley, California where there is variable geology and nearby rock outcrop sites, and a supply of small earthquakes from the nearby Geysers development area. We test several methbods of obtaining site response. We found that rock sites have a site response of their own and distort the site response estimate based upon spectral ratios with soil sites. Also, rock sites may not even be available near all sites throughout a city. Further, H/V site response estimates from earthquakes are marginally better, but vertical motion also has a site response of its own. H

A comparison study of 2006 Java earthquake and other Tsunami earthquakes

NASA Astrophysics Data System (ADS)

Ji, C.; Shao, G.

2006-12-01

We revise the slip processes of July 17 2006 Java earthquakes by combined inverting teleseismic body wave, long period surface waves, as well as the broadband records at Christmas island (XMIS), which is 220 km away from the hypocenter and so far the closest observation for a Tsunami earthquake. Comparing with the previous studies, our approach considers the amplitude variations of surface waves with source depths as well as the contribution of ScS phase, which usually has amplitudes compatible with that of direct S phase for such low angle thrust earthquakes. The fault dip angles are also refined using the Love waves observed along fault strike direction. Our results indicate that the 2006 event initiated at a depth around 12 km and unilaterally rupture southeast for 150 sec with a speed of 1.0 km/sec. The revised fault dip is only about 6 degrees, smaller than the Harvard CMT (10.5 degrees) but consistent with that of 1994 Java earthquake. The smaller fault dip results in a larger moment magnitude (Mw=7.9) for a PREM earth, though it is dependent on the velocity structure used. After verified with 3D SEM forward simulation, we compare the inverted result with the revised slip models of 1994 Java and 1992 Nicaragua earthquakes derived using the same wavelet based finite fault inversion methodology.

Earthquake nucleation by transient deformations caused by the M = 7.9 Denali, Alaska, earthquake

USGS Publications Warehouse

Gomberg, J.; Bodin, P.; Larson, K.; Dragert, H.

2004-01-01

The permanent and dynamic (transient) stress changes inferred to trigger earthquakes are usually orders of magnitude smaller than the stresses relaxed by the earthquakes themselves, implying that triggering occurs on critically stressed faults. Triggered seismicity rate increases may therefore be most likely to occur in areas where loading rates are highest and elevated pore pressures, perhaps facilitated by high-temperature fluids, reduce frictional stresses and promote failure. Here we show that the 2002 magnitude M = 7.9 Denali, Alaska, earthquake triggered wide-spread seismicity rate increases throughout British Columbia and into the western United States. Dynamic triggering by seismic waves should be enhanced in directions where rupture directivity focuses radiated energy, and we verify this using seismic and new high-sample GPS recordings of the Denali mainshock. These observations are comparable in scale only to the triggering caused by the 1992 M = 7.4 Landers, California, earthquake, and demonstrate that Landers triggering did not reflect some peculiarity of the region or the earthquake. However, the rate increases triggered by the Denali earthquake occurred in areas not obviously tectonically active, implying that even in areas of low ambient stressing rates, faults may still be critically stressed and that dynamic triggering may be ubiquitous and unpredictable.

Detection of postseismic fault-zone collapse following the Landers earthquake

NASA Astrophysics Data System (ADS)

Massonnet, Didier; Thatcher, Wayne; Vadon, Hélèna

1996-08-01

STRESS changes caused by fault movement in an earthquake induce transient aseismic crustal movements in the earthquake source region that continue for months to decades following large events1-4. These motions reflect aseismic adjustments of the fault zone and/or bulk deformation of the surroundings in response to applied stresses2,5-7, and supply information regarding the inelastic behaviour of the Earth's crust. These processes are imperfectly understood because it is difficult to infer what occurs at depth using only surface measurements2, which are in general poorly sampled. Here we push satellite radar interferometry to near its typical artefact level, to obtain a map of the postseismic deformation field in the three years following the 28 June 1992 Landers, California earthquake. From the map, we deduce two distinct types of deformation: afterslip at depth on the fault that ruptured in the earthquake, and shortening normal to the fault zone. The latter movement may reflect the closure of dilatant cracks and fluid expulsion from a transiently over-pressured fault zone6-8.

A strain behavior before and after the 2009 Suruga-Bay earthquake (M6.5) in Tokai, Japan

NASA Astrophysics Data System (ADS)

Takanami, T.; Hirata, N.; Kitagawa, G.; Kamigaichi, O.; Linde, A. T.; Sacks, S. I.

2012-12-01

data from the 2003 Tokachi-oki earthquake (M8.0) recorded by the Sacks-Evertson strainmeter, which has been operating since 1982 at Urakawa Seismological Observatory (KMU) of Hokkaido University in the southern part of the Hidaka Mountains (Takanami et al., 2009). KMU is far 105 km NW of the epicenter of the 2003 Tokachi-oki earthquake. After the earthquake, the data showed a clear episode of contraction for 4 days followed by expansion for 23 days. These signals correlate with increased aftershock seismicity for M≧4 events. The strain changes, together with surface displacements detected by the GPS network, are indicative of propagation of slow slip at depth (e.g. Geographical Survey Institute, 2004). We here review the computational approach to state space method and the results of its application to the strain data from the 2009 earthquakes (M6.5) occurred off Sagami in the Tokai area. Interestingly, for the 2011 Tohoku Earthquake off the Pacific coast no pre-slip was detected by land-based observations even though its magnitude was M9. In order to detect the nucleation of such an earthquake occurring far offshore, high-precision strain data is necessary but was not available.

Cascading hazards: Understanding triggering relations between wet tropical cyclones, landslides, and earthquakes

NASA Astrophysics Data System (ADS)

Wdowinski, S.; Peng, Z.; Ferrier, K.; Lin, C. H.; Hsu, Y. J.; Shyu, J. B. H.

2017-12-01

Earthquakes, landslides, and tropical cyclones are extreme hazards that pose significant threats to human life and property. Some of the couplings between these hazards are well known. For example, sudden, widespread landsliding can be triggered by large earthquakes and by extreme rainfall events like tropical cyclones. Recent studies have also shown that earthquakes can be triggered by erosional unloading over 100-year timescales. In a NASA supported project, titled "Cascading hazards: Understanding triggering relations between wet tropical cyclones, landslides, and earthquake", we study triggering relations between these hazard types. The project focuses on such triggering relations in Taiwan, which is subjected to very wet tropical storms, landslides, and earthquakes. One example for such triggering relations is the 2009 Morakot typhoon, which was the wettest recorded typhoon in Taiwan (2850 mm of rain in 100 hours). The typhoon caused widespread flooding and triggered more than 20,000 landslides, including the devastating Hsiaolin landslide. Six months later, the same area was hit by the 2010 M=6.4 Jiashian earthquake near Kaohsiung city, which added to the infrastructure damage induced by the typhoon and the landslides. Preliminary analysis of temporal relations between main-shock earthquakes and the six wettest typhoons in Taiwan's past 50 years reveals similar temporal relations between M≥5 events and wet typhoons. Future work in the project will include remote sensing analysis of landsliding, seismic and geodetic monitoring of landslides, detection of microseismicity and tremor activities, and mechanical modeling of crustal stress changes due to surface unloading.

Lisbon 1755, a multiple-rupture earthquake

NASA Astrophysics Data System (ADS)

Fonseca, J. F. B. D.

2017-12-01

The Lisbon earthquake of 1755 poses a challenge to seismic hazard assessment. Reports pointing to MMI 8 or above at distances of the order of 500km led to magnitude estimates near M9 in classic studies. A refined analysis of the coeval sources lowered the estimates to 8.7 (Johnston, 1998) and 8.5 (Martinez-Solares, 2004). I posit that even these lower magnitude values reflect the combined effect of multiple ruptures. Attempts to identify a single source capable of explaining the damage reports with published ground motion models did not gather consensus and, compounding the challenge, the analysis of tsunami traveltimes has led to disparate source models, sometimes separated by a few hundred kilometers. From this viewpoint, the most credible source would combine a sub-set of the multiple active structures identifiable in SW Iberia. No individual moment magnitude needs to be above M8.1, thus rendering the search for candidate structures less challenging. The possible combinations of active structures should be ranked as a function of their explaining power, for macroseismic intensities and tsunami traveltimes taken together. I argue that the Lisbon 1755 earthquake is an example of a distinct class of intraplate earthquake previously unrecognized, of which the Indian Ocean earthquake of 2012 is the first instrumentally recorded example, showing space and time correlation over scales of the orders of a few hundred km and a few minutes. Other examples may exist in the historical record, such as the M8 1556 Shaanxi earthquake, with an unusually large damage footprint (MMI equal or above 6 in 10 provinces; 830000 fatalities). The ability to trigger seismicity globally, observed after the 2012 Indian Ocean earthquake, may be a characteristic of this type of event: occurrences in Massachussets (M5.9 Cape Ann earthquake on 18/11/1755), Morocco (M6.5 Fez earthquake on 27/11/1755) and Germany (M6.1 Duren earthquake, on 18/02/1756) had in all likelyhood a causal link to the

Infrasound Signal Characteristics from Small Earthquakes

DTIC Science & Technology

2011-09-01

INFRASOUND SIGNAL CHARACTERISTICS FROM SMALL EARTHQUAKES Stephen J. Arrowsmith1, J. Mark Hale2, Relu Burlacu2, Kristine L. Pankow2, Brian W. Stump3...ABSTRACT Physical insight into source properties that contribute to the generation of infrasound signals is critical to understanding the...m, with one element being co-located with a seismic station. One of the goals of this project is the recording of infrasound from earthquakes of

Unraveling earthquake stresses: Insights from dynamically triggered and induced earthquakes

NASA Astrophysics Data System (ADS)

Velasco, A. A.; Alfaro-Diaz, R. A.

2017-12-01

Induced seismicity, earthquakes caused by anthropogenic activity, has more than doubled in the last several years resulting from practices related to oil and gas production. Furthermore, large earthquakes have been shown to promote the triggering of other events within two fault lengths (static triggering), due to static stresses caused by physical movement along the fault, and also remotely from the passage of seismic waves (dynamic triggering). Thus, in order to understand the mechanisms for earthquake failure, we investigate regions where natural, induced, and dynamically triggered events occur, and specifically target Oklahoma. We first analyze data from EarthScope's USArray Transportable Array (TA) and local seismic networks implementing an optimized (STA/LTA) detector in order to develop local detection and earthquake catalogs. After we identify triggered events through statistical analysis, and perform a stress analysis to gain insight on the stress-states leading to triggered earthquake failure. We use our observations to determine the role of different transient stresses in contributing to natural and induced seismicity by comparing these stresses to regional stress orientation. We also delineate critically stressed regions of triggered seismicity that may indicate areas susceptible to earthquake hazards associated with sustained fluid injection in provinces of induced seismicity. Anthropogenic injection and extraction activity can alter the stress state and fluid flow within production basins. By analyzing the stress release of these ancient faults caused by dynamic stresses, we may be able to determine if fluids are solely responsible for increased seismic activity in induced regions.

Some observations on colocated and closely spaced strong ground-motion records of the 1999 Chi-Chi, Taiwan, earthquake

USGS Publications Warehouse

Wang, G.-Q.; Boore, D.M.; Igel, H.; Zhou, X.-Y.

2003-01-01

The digital accelerograph network installed in Taiwan produced a rich set of records from the 20 September 1999 Chi-Chi, Taiwan earthquake (Mw 7.6). Teledyne Geotech model A-800 and A-900A* digital accelerographs were colocated at 22 stations that recorded this event. Comparisons of the amplitudes, frequency content, and baseline offsets show that records from several of the A-800 accelerographs are considerably different than those from the colocated A-900A accelerographs. On this basis, and in view of the more thorough predeployment testing of the newer A-900A instruments, we recommend that the records from the A-800 instruments be used with caution in analyses of the mainshock and aftershocks. At the Hualien seismic station two A-900A and one A-800 instruments were colocated, along with a Global Positioning System instrument. Although the records from the two A-900A instruments are much more similar than those from a colocated A-800 instrument, both three-component records contain unpredictable baseline offsets, which produced completely unrealistic ground displacements derived from the accelerations by double integration, as do many of the strong-motion data from this event; the details of the baseline offsets differ considerably on the two three-component records. There are probably numerous sources of the baseline offsets, including sources external to the instruments, such as tilting or rotation of the ground, and sources internal to the instruments, such as electrical or mechanical hysteresis in the sensors. For the two colocated A-900A records at the Hualien seismic station, however, the differences in the baseline offsets suggest that the principal source is some transient disturbance within the instrument. The baseline offsets generally manifest themselves in the acceleration time series as pulses or steps, either singly or in combination. We find a 0.015-Hz low-cut filter can almost completely eliminate the effects of the baseline offsets, but then

Constructing new seismograms from old earthquakes: Retrospective seismology at multiple length scales

NASA Astrophysics Data System (ADS)

Entwistle, Elizabeth; Curtis, Andrew; Galetti, Erica; Baptie, Brian; Meles, Giovanni

2015-04-01

If energy emitted by a seismic source such as an earthquake is recorded on a suitable backbone array of seismometers, source-receiver interferometry (SRI) is a method that allows those recordings to be projected to the location of another target seismometer, providing an estimate of the seismogram that would have been recorded at that location. Since the other seismometer may not have been deployed at the time the source occurred, this renders possible the concept of 'retrospective seismology' whereby the installation of a sensor at one period of time allows the construction of virtual seismograms as though that sensor had been active before or after its period of installation. Using the benefit of hindsight of earthquake location or magnitude estimates, SRI can establish new measurement capabilities closer to earthquake epicenters, thus potentially improving earthquake location estimates. Recently we showed that virtual SRI seismograms can be constructed on target sensors in both industrial seismic and earthquake seismology settings, using both active seismic sources and ambient seismic noise to construct SRI propagators, and on length scales ranging over 5 orders of magnitude from ~40 m to ~2500 km[1]. Here we present the results from earthquake seismology by comparing virtual earthquake seismograms constructed at target sensors by SRI to those actually recorded on the same sensors. We show that spatial integrations required by interferometric theory can be calculated over irregular receiver arrays by embedding these arrays within 2D spatial Voronoi cells, thus improving spatial interpolation and interferometric results. The results of SRI are significantly improved by restricting the backbone receiver array to include approximately those receivers that provide a stationary phase contribution to the interferometric integrals. We apply both correlation-correlation and correlation-convolution SRI, and show that the latter constructs virtual seismograms with fewer

Response of a 14-story Anchorage, Alaska, building in 2002 to two close earthquakes and two distant Denali fault earthquakes

USGS Publications Warehouse

Celebi, M.

2004-01-01

The recorded responses of an Anchorage, Alaska, building during four significant earthquakes that occurred in 2002 are studied. Two earthquakes, including the 3 November 2002 M7.9 Denali fault earthquake, with epicenters approximately 275 km from the building, generated long trains of long-period (>1 s) surface waves. The other two smaller earthquakes occurred at subcrustal depths practically beneath Anchorage and produced higher frequency motions. These two pairs of earthquakes have different impacts on the response of the building. Higher modes are more pronounced in the building response during the smaller nearby events. The building responses indicate that the close-coupling of translational and torsional modes causes a significant beating effect. It is also possible that there is some resonance occurring due to the site frequency being close to the structural frequency. Identification of dynamic characteristics and behavior of buildings can provide important lessons for future earthquake-resistant designs and retrofit of existing buildings. ?? 2004, Earthquake Engineering Research Institute.

The enigmatic Bala earthquake of 1974

NASA Astrophysics Data System (ADS)

Musson, R. M. W.

2006-10-01

The earthquake that shook most of North Wales on the night of 23 January 1974 appears unremarkable from its entry in the UK earthquake catalogue. With a magnitude of 3.5 ML it represents the size of earthquake to be expected in the UK with a return period of about one year. However, the prominent atmospheric lights observed at the time of the shock led to speculation that an aircraft had crashed, and search-and-rescue teams were deployed. Since nothing was discovered, it was concluded that a meteorite was responsible; more imaginative members of the public decided (and still believe) that a UFO had crashed. In this paper the record of events is set out, and the nature of the earthquake is discussed with reference to its geological setting.

Detecting earthquakes over a seismic network using single-station similarity measures

NASA Astrophysics Data System (ADS)

Bergen, Karianne J.; Beroza, Gregory C.

2018-06-01

New blind waveform-similarity-based detection methods, such as Fingerprint and Similarity Thresholding (FAST), have shown promise for detecting weak signals in long-duration, continuous waveform data. While blind detectors are capable of identifying similar or repeating waveforms without templates, they can also be susceptible to false detections due to local correlated noise. In this work, we present a set of three new methods that allow us to extend single-station similarity-based detection over a seismic network; event-pair extraction, pairwise pseudo-association, and event resolution complete a post-processing pipeline that combines single-station similarity measures (e.g. FAST sparse similarity matrix) from each station in a network into a list of candidate events. The core technique, pairwise pseudo-association, leverages the pairwise structure of event detections in its network detection model, which allows it to identify events observed at multiple stations in the network without modeling the expected moveout. Though our approach is general, we apply it to extend FAST over a sparse seismic network. We demonstrate that our network-based extension of FAST is both sensitive and maintains a low false detection rate. As a test case, we apply our approach to 2 weeks of continuous waveform data from five stations during the foreshock sequence prior to the 2014 Mw 8.2 Iquique earthquake. Our method identifies nearly five times as many events as the local seismicity catalogue (including 95 per cent of the catalogue events), and less than 1 per cent of these candidate events are false detections.

Detecting Earthquakes over a Seismic Network using Single-Station Similarity Measures

NASA Astrophysics Data System (ADS)

Bergen, Karianne J.; Beroza, Gregory C.

2018-03-01

New blind waveform-similarity-based detection methods, such as Fingerprint and Similarity Thresholding (FAST), have shown promise for detecting weak signals in long-duration, continuous waveform data. While blind detectors are capable of identifying similar or repeating waveforms without templates, they can also be susceptible to false detections due to local correlated noise. In this work, we present a set of three new methods that allow us to extend single-station similarity-based detection over a seismic network; event-pair extraction, pairwise pseudo-association, and event resolution complete a post-processing pipeline that combines single-station similarity measures (e.g. FAST sparse similarity matrix) from each station in a network into a list of candidate events. The core technique, pairwise pseudo-association, leverages the pairwise structure of event detections in its network detection model, which allows it to identify events observed at multiple stations in the network without modeling the expected move-out. Though our approach is general, we apply it to extend FAST over a sparse seismic network. We demonstrate that our network-based extension of FAST is both sensitive and maintains a low false detection rate. As a test case, we apply our approach to two weeks of continuous waveform data from five stations during the foreshock sequence prior to the 2014 Mw 8.2 Iquique earthquake. Our method identifies nearly five times as many events as the local seismicity catalog (including 95% of the catalog events), and less than 1% of these candidate events are false detections.

Thermal and TEC anomalies detection using an intelligent hybrid system around the time of the Saravan, Iran, (Mw = 7.7) earthquake of 16 April 2013

NASA Astrophysics Data System (ADS)

Akhoondzadeh, M.

2014-02-01

A powerful earthquake of Mw = 7.7 struck the Saravan region (28.107° N, 62.053° E) in Iran on 16 April 2013. Up to now nomination of an automated anomaly detection method in a non linear time series of earthquake precursor has been an attractive and challenging task. Artificial Neural Network (ANN) and Particle Swarm Optimization (PSO) have revealed strong potentials in accurate time series prediction. This paper presents the first study of an integration of ANN and PSO method in the research of earthquake precursors to detect the unusual variations of the thermal and total electron content (TEC) seismo-ionospheric anomalies induced by the strong earthquake of Saravan. In this study, to overcome the stagnation in local minimum during the ANN training, PSO as an optimization method is used instead of traditional algorithms for training the ANN method. The proposed hybrid method detected a considerable number of anomalies 4 and 8 days preceding the earthquake. Since, in this case study, ionospheric TEC anomalies induced by seismic activity is confused with background fluctuations due to solar activity, a multi-resolution time series processing technique based on wavelet transform has been applied on TEC signal variations. In view of the fact that the accordance in the final results deduced from some robust methods is a convincing indication for the efficiency of the method, therefore the detected thermal and TEC anomalies using the ANN + PSO method were compared to the results with regard to the observed anomalies by implementing the mean, median, Wavelet, Kalman filter, Auto-Regressive Integrated Moving Average (ARIMA), Support Vector Machine (SVM) and Genetic Algorithm (GA) methods. The results indicate that the ANN + PSO method is quite promising and deserves serious attention as a new tool for thermal and TEC seismo anomalies detection.

An automated multi-scale network-based scheme for detection and location of seismic sources

NASA Astrophysics Data System (ADS)

Poiata, N.; Aden-Antoniow, F.; Satriano, C.; Bernard, P.; Vilotte, J. P.; Obara, K.

2017-12-01

We present a recently developed method - BackTrackBB (Poiata et al. 2016) - allowing to image energy radiation from different seismic sources (e.g., earthquakes, LFEs, tremors) in different tectonic environments using continuous seismic records. The method exploits multi-scale frequency-selective coherence in the wave field, recorded by regional seismic networks or local arrays. The detection and location scheme is based on space-time reconstruction of the seismic sources through an imaging function built from the sum of station-pair time-delay likelihood functions, projected onto theoretical 3D time-delay grids. This imaging function is interpreted as the location likelihood of the seismic source. A signal pre-processing step constructs a multi-band statistical representation of the non stationary signal, i.e. time series, by means of higher-order statistics or energy envelope characteristic functions. Such signal-processing is designed to detect in time signal transients - of different scales and a priori unknown predominant frequency - potentially associated with a variety of sources (e.g., earthquakes, LFE, tremors), and to improve the performance and the robustness of the detection-and-location location step. The initial detection-location, based on a single phase analysis with the P- or S-phase only, can then be improved recursively in a station selection scheme. This scheme - exploiting the 3-component records - makes use of P- and S-phase characteristic functions, extracted after a polarization analysis of the event waveforms, and combines the single phase imaging functions with the S-P differential imaging functions. The performance of the method is demonstrated here in different tectonic environments: (1) analysis of the one year long precursory phase of 2014 Iquique earthquake in Chile; (2) detection and location of tectonic tremor sources and low-frequency earthquakes during the multiple episodes of tectonic tremor activity in southwestern Japan.

Unsupervised Approaches for Post-Processing in Computationally Efficient Waveform-Similarity-Based Earthquake Detection

NASA Astrophysics Data System (ADS)

Bergen, K.; Yoon, C. E.; OReilly, O. J.; Beroza, G. C.

2015-12-01

Recent improvements in computational efficiency for waveform correlation-based detections achieved by new methods such as Fingerprint and Similarity Thresholding (FAST) promise to allow large-scale blind search for similar waveforms in long-duration continuous seismic data. Waveform similarity search applied to datasets of months to years of continuous seismic data will identify significantly more events than traditional detection methods. With the anticipated increase in number of detections and associated increase in false positives, manual inspection of the detection results will become infeasible. This motivates the need for new approaches to process the output of similarity-based detection. We explore data mining techniques for improved detection post-processing. We approach this by considering similarity-detector output as a sparse similarity graph with candidate events as vertices and similarities as weighted edges. Image processing techniques are leveraged to define candidate events and combine results individually processed at multiple stations. Clustering and graph analysis methods are used to identify groups of similar waveforms and assign a confidence score to candidate detections. Anomaly detection and classification are applied to waveform data for additional false detection removal. A comparison of methods will be presented and their performance will be demonstrated on a suspected induced and non-induced earthquake sequence.

A Deterministic Methodology for Discriminating between Earthquakes and Underground Nuclear Explosions

DTIC Science & Technology

1976-07-01

rupture (right) to represent a bilat- eral rupture is described in the text Page 48 50 51 56 60 3.11 Far-field radiation patterns for the bi ...particularly effective for detecting, isolating and timing the various seismic phases ^g’ p*’ pn’ Sg’ s*’ Sn , etc.) that are recorded on event seismograms in...of the stress field during rupture. 5. A criterion allowing the rupture to heal . All earthquake models must, implicitly or explicitly, deal with

Near-simultaneous great earthquakes at Tongan megathrust and outer rise in September 2009.

PubMed

Beavan, J; Wang, X; Holden, C; Wilson, K; Power, W; Prasetya, G; Bevis, M; Kautoke, R

2010-08-19

The Earth's largest earthquakes and tsunamis are usually caused by thrust-faulting earthquakes on the shallow part of the subduction interface between two tectonic plates, where stored elastic energy due to convergence between the plates is rapidly released. The tsunami that devastated the Samoan and northern Tongan islands on 29 September 2009 was preceded by a globally recorded magnitude-8 normal-faulting earthquake in the outer-rise region, where the Pacific plate bends before entering the subduction zone. Preliminary interpretation suggested that this earthquake was the source of the tsunami. Here we show that the outer-rise earthquake was accompanied by a nearly simultaneous rupture of the shallow subduction interface, equivalent to a magnitude-8 earthquake, that also contributed significantly to the tsunami. The subduction interface event was probably a slow earthquake with a rise time of several minutes that triggered the outer-rise event several minutes later. However, we cannot rule out the possibility that the normal fault ruptured first and dynamically triggered the subduction interface event. Our evidence comes from displacements of Global Positioning System stations and modelling of tsunami waves recorded by ocean-bottom pressure sensors, with support from seismic data and tsunami field observations. Evidence of the subduction earthquake in global seismic data is largely hidden because of the earthquake's slow rise time or because its ground motion is disguised by that of the normal-faulting event. Earthquake doublets where subduction interface events trigger large outer-rise earthquakes have been recorded previously, but this is the first well-documented example where the two events occur so closely in time and the triggering event might be a slow earthquake. As well as providing information on strain release mechanisms at subduction zones, earthquakes such as this provide a possible mechanism for the occasional large tsunamis generated at the Tonga

Map showing surface ruptures associated with the Mammoth Lakes, California, earthquakes of May 1980

USGS Publications Warehouse

Clark, M.M.; Yount, J.C.; Vaughn, P.R.; Zepeda, R.L.

1982-01-01

This map shows surface ruptures associated with the M 6 Mammoth Lakes earthquakes of May 25-27, 1980 (Sherburne, 1980). The ruptures were mapped during USGS field investigations May 28 to June 4 and July 14-19, 1980. The map also includes some of the ruptures recorded by California Division of Mines and Geology investigators May 26-31, June 26-27, and July 7-11, 1980 (Taylor and Bryant, 1980). Because most of the surface ruptures developed in either unconsolidated pumice, alluvium, or till (and many were on slopes of scarps created by earlier faulting), wind, rain and animals quickly erased many of the ruptures. In places, the minimum detectable slip was 3-10 mm. Thus the lines on the map do not record all of the ruptures that formed at the time of the earthquake. Many of the areas were we show gaps between lines on the map probably had cracks originally. 

A comparison of earthquake backprojection imaging methods for dense local arrays

NASA Astrophysics Data System (ADS)

Beskardes, G. D.; Hole, J. A.; Wang, K.; Michaelides, M.; Wu, Q.; Chapman, M. C.; Davenport, K. K.; Brown, L. D.; Quiros, D. A.

2018-03-01

Backprojection imaging has recently become a practical method for local earthquake detection and location due to the deployment of densely sampled, continuously recorded, local seismograph arrays. While backprojection sometimes utilizes the full seismic waveform, the waveforms are often pre-processed and simplified to overcome imaging challenges. Real data issues include aliased station spacing, inadequate array aperture, inaccurate velocity model, low signal-to-noise ratio, large noise bursts and varying waveform polarity. We compare the performance of backprojection with four previously used data pre-processing methods: raw waveform, envelope, short-term averaging/long-term averaging and kurtosis. Our primary goal is to detect and locate events smaller than noise by stacking prior to detection to improve the signal-to-noise ratio. The objective is to identify an optimized strategy for automated imaging that is robust in the presence of real-data issues, has the lowest signal-to-noise thresholds for detection and for location, has the best spatial resolution of the source images, preserves magnitude, and considers computational cost. Imaging method performance is assessed using a real aftershock data set recorded by the dense AIDA array following the 2011 Virginia earthquake. Our comparisons show that raw-waveform backprojection provides the best spatial resolution, preserves magnitude and boosts signal to detect events smaller than noise, but is most sensitive to velocity error, polarity error and noise bursts. On the other hand, the other methods avoid polarity error and reduce sensitivity to velocity error, but sacrifice spatial resolution and cannot effectively reduce noise by stacking. Of these, only kurtosis is insensitive to large noise bursts while being as efficient as the raw-waveform method to lower the detection threshold; however, it does not preserve the magnitude information. For automatic detection and location of events in a large data set, we

High resolution strain sensor for earthquake precursor observation and earthquake monitoring

NASA Astrophysics Data System (ADS)

Zhang, Wentao; Huang, Wenzhu; Li, Li; Liu, Wenyi; Li, Fang

2016-05-01

We propose a high-resolution static-strain sensor based on a FBG Fabry-Perot interferometer (FBG-FP) and a wavelet domain cross-correlation algorithm. This sensor is used for crust deformation measurement, which plays an important role in earthquake precursor observation. The Pound-Drever-Hall (PDH) technique based on a narrow-linewidth tunable fiber laser is used to interrogate the FBG-FPs. A demodulation algorithm based on wavelet domain cross-correlation is used to calculate the wavelength difference. The FBG-FP sensor head is fixed on the two steel alloy rods which are installed in the bedrock. The reference FBG-FP is placed in a strain-free state closely to compensate the environment temperature fluctuation. A static-strain resolution of 1.6 n(epsilon) can be achieved. As a result, clear solid tide signals and seismic signals can be recorded, which suggests that the proposed strain sensor can be applied to earthquake precursor observation and earthquake monitoring.

Earthquake Prediction in Large-scale Faulting Experiments

NASA Astrophysics Data System (ADS)

Junger, J.; Kilgore, B.; Beeler, N.; Dieterich, J.

2004-12-01

nucleation in these experiments is consistent with observations and theory of Dieterich and Kilgore (1996). Precursory strains can be detected typically after 50% of the total loading time. The Dieterich and Kilgore approach implies an alternative method of earthquake prediction based on comparing real-time strain monitoring with previous precursory strain records or with physically-based models of accelerating slip. Near failure, time to failure t is approximately inversely proportional to precursory slip rate V. Based on a least squares fit to accelerating slip velocity from ten or more events, the standard deviation of the residual between predicted and observed log t is typically 0.14. Scaling these results to natural recurrence suggests that a year prior to an earthquake, failure time can be predicted from measured fault slip rate with a typical error of 140 days, and a day prior to the earthquake with a typical error of 9 hours. However, such predictions require detecting aseismic nucleating strains, which have not yet been found in the field, and on distinguishing earthquake precursors from other strain transients. There is some field evidence of precursory seismic strain for large earthquakes (Bufe and Varnes, 1993) which may be related to our observations. In instances where precursory activity is spatially variable during the interseismic period, as in our experiments, distinguishing precursory activity might be best accomplished with deep arrays of near fault instruments and pattern recognition algorithms such as principle component analysis (Rundle et al., 2000).

Long Period Earthquakes Beneath California's Young and Restless Volcanoes

NASA Astrophysics Data System (ADS)

Pitt, A. M.; Dawson, P. B.; Shelly, D. R.; Hill, D. P.; Mangan, M.

2013-12-01

The newly established USGS California Volcano Observatory has the broad responsibility of monitoring and assessing hazards at California's potentially threatening volcanoes, most notably Mount Shasta, Medicine Lake, Clear Lake Volcanic Field, and Lassen Volcanic Center in northern California; and Long Valley Caldera, Mammoth Mountain, and Mono-Inyo Craters in east-central California. Volcanic eruptions occur in California about as frequently as the largest San Andreas Fault Zone earthquakes-more than ten eruptions have occurred in the last 1,000 years, most recently at Lassen Peak (1666 C.E. and 1914-1917 C.E.) and Mono-Inyo Craters (c. 1700 C.E.). The Long Valley region (Long Valley caldera and Mammoth Mountain) underwent several episodes of heightened unrest over the last three decades, including intense swarms of volcano-tectonic (VT) earthquakes, rapid caldera uplift, and hazardous CO2 emissions. Both Medicine Lake and Lassen are subsiding at appreciable rates, and along with Clear Lake, Long Valley Caldera, and Mammoth Mountain, sporadically experience long period (LP) earthquakes related to migration of magmatic or hydrothermal fluids. Worldwide, the last two decades have shown the importance of tracking LP earthquakes beneath young volcanic systems, as they often provide indication of impending unrest or eruption. Herein we document the occurrence of LP earthquakes at several of California's young volcanoes, updating a previous study published in Pitt et al., 2002, SRL. All events were detected and located using data from stations within the Northern California Seismic Network (NCSN). Event detection was spatially and temporally uneven across the NCSN in the 1980s and 1990s, but additional stations, adoption of the Earthworm processing system, and heightened vigilance by seismologists have improved the catalog over the last decade. LP earthquakes are now relatively well-recorded under Lassen (~150 events since 2000), Clear Lake (~60 events), Mammoth Mountain

Earthquake hazards on the cascadia subduction zone.

PubMed

Heaton, T H; Hartzell, S H

1987-04-10

Large subduction earthquakes on the Cascadia subduction zone pose a potential seismic hazard. Very young oceanic lithosphere (10 million years old) is being subducted beneath North America at a rate of approximately 4 centimeters per year. The Cascadia subduction zone shares many characteristics with subduction zones in southern Chile, southwestern Japan, and Colombia, where comparably young oceanic lithosphere is also subducting. Very large subduction earthquakes, ranging in energy magnitude (M(w)) between 8 and 9.5, have occurred along these other subduction zones. If the Cascadia subduction zone is also storing elastic energy, a sequence of several great earthquakes (M(w) 8) or a giant earthquake (M(w) 9) would be necessary to fill this 1200-kilometer gap. The nature of strong ground motions recorded during subduction earthquakes of M(w) less than 8.2 is discussed. Strong ground motions from even larger earthquakes (M(w) up to 9.5) are estimated by simple simulations. If large subduction earthquakes occur in the Pacific Northwest, relatively strong shaking can be expected over a large region. Such earthquakes may also be accompanied by large local tsunamis.

Earthquakes in southern Dalmatia and coastal Montenegro before the large 6 April 1667 event

NASA Astrophysics Data System (ADS)

Albini, Paola; Rovida, Andrea

2018-05-01

The fourteenth to seventeenth century seismicity of southern Dalmatia (Croatia) and coastal Montenegro deserved to be fully reappraised because of the ascertained imperfect knowledge offered by modern seismological studies and of the awareness of the smokescreen effect due to the large 6 April 1667 M 6.4 earthquake that impacted exactly the area of study. The investigation consisted of (i) a reconsideration of earthquake records made available by previous studies and (ii) a systematic analysis of historical sources contemporary to the earthquakes, especially those not yet taken into account in seismological studies. The 168 contemporary and independent records collected cast a different light on more than 300 years of seismicity of this area. Records are reckoned to be unevenly distributed among the 39 studied earthquakes, out of which 15 still rely upon a single testimony. Each record has been reevaluated with respect to its content and attributed a level of reliability, which for those reporting other 14 events was so low to prevent us from confirming their real occurrence. Completely unreliable records have been identified and discussed, to conclude that they are at the root of five fake earthquakes. Altogether, 34 intensity values in EMS-98 were assessed related to 15 moderate and five damaging earthquakes. Existing and newly obtained data contributed to putting the pre-1667 seismicity of southern Dalmatia and coastal Montenegro into a substantially different perspective.

Earthquakes in southern Dalmatia and coastal Montenegro before the large 6 April 1667 event

NASA Astrophysics Data System (ADS)

Albini, Paola; Rovida, Andrea

2018-02-01

The fourteenth to seventeenth century seismicity of southern Dalmatia (Croatia) and coastal Montenegro deserved to be fully reappraised because of the ascertained imperfect knowledge offered by modern seismological studies and of the awareness of the smokescreen effect due to the large 6 April 1667 M 6.4 earthquake that impacted exactly the area of study. The investigation consisted of (i) a reconsideration of earthquake records made available by previous studies and (ii) a systematic analysis of historical sources contemporary to the earthquakes, especially those not yet taken into account in seismological studies. The 168 contemporary and independent records collected cast a different light on more than 300 years of seismicity of this area. Records are reckoned to be unevenly distributed among the 39 studied earthquakes, out of which 15 still rely upon a single testimony. Each record has been reevaluated with respect to its content and attributed a level of reliability, which for those reporting other 14 events was so low to prevent us from confirming their real occurrence. Completely unreliable records have been identified and discussed, to conclude that they are at the root of five fake earthquakes. Altogether, 34 intensity values in EMS-98 were assessed related to 15 moderate and five damaging earthquakes. Existing and newly obtained data contributed to putting the pre-1667 seismicity of southern Dalmatia and coastal Montenegro into a substantially different perspective.

Ocean bottom pressure observations near the source of the 2011 Tohoku earthquake

NASA Astrophysics Data System (ADS)

Inazu, D.; Hino, R.; Suzuki, S.; Osada, Y.; Ohta, Y.; Iinuma, T.; Tsushima, H.; Ito, Y.; Kido, M.; Fujimoto, H.

2011-12-01

A Mw9.0 earthquake occurred off Miyagi, northeast Japan, on 11 March 2011 (hereafter mainshock). An earthquake of M7.3, considered to be the largest foreshock of the mainshock, occurred on 9 March 2011 near the mainshock hypocenter. A suite of seismic and geodetic variations related to these earthquakes was observed by autonomous, ocean bottom pressure (OBP) gauges at multiple sites (4 sites at present) near the sources within a distance of about 100 km. This paper presents the OBP records with a focus on the earthquakes. Thanks to correcting tides, instrumental drifts, and non-tidal oceanic variations, we can detect OBP signals of tsunamis and vertical seafloor deformation of the order of centimeters with timescales of less than months. In the following we review the detected signals and how to correct the OBP data. The coseismic seafloor displacement and the tsunami accompanied by the mainshock were of the order of meters and large enough to be distinctly identified (Ito et al., 2011, GRL). Co- and post-seismic seafloor displacement and tsunami accompanied by the foreshock were of the order of centimeters which is difficult to be identified from the raw OBP records. The first evident pulses of these tsunamis in the deep sea have durations (periods) of ~20 minutes and ~10 minutes, for the mainshock and the foreshock, respectively. Amounts of seafloor vertical displacement due to post-mainshock deformation reached a few tens of centimeters in two months. It is worth noting that elevation and depression of seafloor were detected at rates of a couple of centimeters in a day after the largest foreshock. The seafloor displacement of centimeters between the largest foreshock and the mainshock can be reasonably identified after correcting non-tidal oceanic variations. The oceanic variations are simulated by a barotropic ocean model driven by atmospheric disturbances (Inazu et al., 2011, Ann. Rep. Earth Simulator Center 2011). The model enables residual OBP time series of

Tilt precursors before earthquakes on the San Andreas fault, California

USGS Publications Warehouse

Johnston, M.J.S.; Mortensen, C.E.

1974-01-01

An array of 14 biaxial shallow-borehole tiltmeters (at 10-7 radian sensitivity) has been installed along 85 kilometers of the San Andreas fault during the past year. Earthquake-related changes in tilt have been simultaneously observed on up to four independent instruments. At earthquake distances greater than 10 earthquake source dimensions, there are few clear indications of tilt change. For the four instruments with the longest records (>10 months), 26 earthquakes have occurred since July 1973 with at least one instrument closer than 10 source dimensions and 8 earthquakes with more than one instrument within that distance. Precursors in tilt direction have been observed before more than 10 earthquakes or groups of earthquakes, and no similar effect has yet been seen without the occurrence of an earthquake.

Ionospheric anomalies detected by ionosonde and possibly related to crustal earthquakes in Greece

NASA Astrophysics Data System (ADS)

Perrone, Loredana; De Santis, Angelo; Abbattista, Cristoforo; Alfonsi, Lucilla; Amoruso, Leonardo; Carbone, Marianna; Cesaroni, Claudio; Cianchini, Gianfranco; De Franceschi, Giorgiana; De Santis, Anna; Di Giovambattista, Rita; Marchetti, Dedalo; Pavòn-Carrasco, Francisco J.; Piscini, Alessandro; Spogli, Luca; Santoro, Francesca

2018-03-01

Ionosonde data and crustal earthquakes with magnitude M ≥ 6.0 observed in Greece during the 2003-2015 period were examined to check if the relationships obtained earlier between precursory ionospheric anomalies and earthquakes in Japan and central Italy are also valid for Greek earthquakes. The ionospheric anomalies are identified on the observed variations of the sporadic E-layer parameters (h'Es, foEs) and foF2 at the ionospheric station of Athens. The corresponding empirical relationships between the seismo-ionospheric disturbances and the earthquake magnitude and the epicentral distance are obtained and found to be similar to those previously published for other case studies. The large lead times found for the ionospheric anomalies occurrence may confirm a rather long earthquake preparation period. The possibility of using the relationships obtained for earthquake prediction is finally discussed.

Real-Time Data Processing Systems and Products at the Alaska Earthquake Information Center

NASA Astrophysics Data System (ADS)

Ruppert, N. A.; Hansen, R. A.

2007-05-01

The Alaska Earthquake Information Center (AEIC) receives data from over 400 seismic sites located within the state boundaries and the surrounding regions and serves as a regional data center. In 2007, the AEIC reported ~20,000 seismic events, with the largest event of M6.6 in Andreanof Islands. The real-time earthquake detection and data processing systems at AEIC are based on the Antelope system from BRTT, Inc. This modular and extensible processing platform allows an integrated system complete from data acquisition to catalog production. Multiple additional modules constructed with the Antelope toolbox have been developed to fit particular needs of the AEIC. The real-time earthquake locations and magnitudes are determined within 2-5 minutes of the event occurrence. AEIC maintains a 24/7 seismologist-on-duty schedule. Earthquake alarms are based on the real- time earthquake detections. Significant events are reviewed by the seismologist on duty within 30 minutes of the occurrence with information releases issued for significant events. This information is disseminated immediately via the AEIC website, ANSS website via QDDS submissions, through e-mail, cell phone and pager notifications, via fax broadcasts and recorded voice-mail messages. In addition, automatic regional moment tensors are determined for events with M>=4.0. This information is posted on the public website. ShakeMaps are being calculated in real-time with the information currently accessible via a password-protected website. AEIC is designing an alarm system targeted for the critical lifeline operations in Alaska. AEIC maintains an extensive computer network to provide adequate support for data processing and archival. For real-time processing, AEIC operates two identical, interoperable computer systems in parallel.

Earthquake and ambient vibration monitoring of the steel-frame UCLA factor building

USGS Publications Warehouse

Kohler, M.D.; Davis, P.M.; Safak, E.

2005-01-01

Dynamic property measurements of the moment-resisting steel-frame University of California, Los Angeles, Factor building are being made to assess how forces are distributed over the building. Fourier amplitude spectra have been calculated from several intervals of ambient vibrations, a 24-hour period of strong winds, and from the 28 March 2003 Encino, California (ML = 2.9), the 3 September 2002 Yorba Linda, California (ML = 4.7), and the 3 November 2002 Central Alaska (Mw = 7.9) earthquakes. Measurements made from the ambient vibration records show that the first-mode frequency of horizontal vibration is between 0.55 and 0.6 Hz. The second horizontal mode has a frequency between 1.6 and 1.9 Hz. In contrast, the first-mode frequencies measured from earthquake data are about 0.05 to 0.1 Hz lower than those corresponding to ambient vibration recordings indicating softening of the soil-structure system as amplitudes become larger. The frequencies revert to pre-earthquake levels within five minutes of the Yorba Linda earthquake. Shaking due to strong winds that occurred during the Encino earthquake dominates the frequency decrease, which correlates in time with the duration of the strong winds. The first shear wave recorded from the Encino and Yorba Linda earthquakes takes about 0.4 sec to travel up the 17-story building. ?? 2005, Earthquake Engineering Research Institute.

Very High-rate (50 Hz) GPS for Detection of Earthquake Ground Motions : How High Do We Need to Go?

NASA Astrophysics Data System (ADS)

Fang, R.

2017-12-01

The GPS variometric approach can measure displacements using broadcast ephemeris and a single receiver, with comparable precision to relative positioning and PPP within a short period of time. We evaluate the performance of the variometric approach to measure displacements using very high-rate (50 Hz) GPS data, which recorded from the 2013 Mw 6.6 Lushan earthquake and the 2011 Mw 9.0 Tohoku-Oki earthquake. To remove the nonlinear drift due to integration process, we present to apply a high-pass filter to reconstruct displacements using the variometric approach. Comparison between 50 Hz and 1 Hz coseismic displacements demonstrates that 1 Hz solutions often fail to faithfully manifest the seismic waves containing high-frequency (> 0.5 Hz) seismic signals, which is common for near-field stations during a moderate-magnitude earthquake. Therefore, in order to reconstruct near-field seismic waves caused by moderate or large earthquakes, it is helpful to equip monitoring stations with very high-rate GPS receivers. Results derived using the variometric approach are compared with PPP results. They display very good consistence within only a few millimeters both in static and seismic periods. High-frequency (above 10 Hz) noises of displacements derived using the variometric approach are smaller than PPP displacements in three components.

Triggered creep as a possible mechanism for delayed dynamic triggering of tremor and earthquakes

USGS Publications Warehouse

Shelly, David R.; Peng, Zhigang; Hill, David P.; Aiken, Chastity

2011-01-01

The passage of radiating seismic waves generates transient stresses in the Earth's crust that can trigger slip on faults far away from the original earthquake source. The triggered fault slip is detectable in the form of earthquakes and seismic tremor. However, the significance of these triggered events remains controversial, in part because they often occur with some delay, long after the triggering stress has passed. Here we scrutinize the location and timing of tremor on the San Andreas fault between 2001 and 2010 in relation to distant earthquakes. We observe tremor on the San Andreas fault that is initiated by passing seismic waves, yet migrates along the fault at a much slower velocity than the radiating seismic waves. We suggest that the migrating tremor records triggered slow slip of the San Andreas fault as a propagating creep event. We find that the triggered tremor and fault creep can be initiated by distant earthquakes as small as magnitude 5.4 and can persist for several days after the seismic waves have passed. Our observations of prolonged tremor activity provide a clear example of the delayed dynamic triggering of seismic events. Fault creep has been shown to trigger earthquakes, and we therefore suggest that the dynamic triggering of prolonged fault creep could provide a mechanism for the delayed triggering of earthquakes. ?? 2011 Macmillan Publishers Limited. All rights reserved.

Stress Drop and Depth Controls on Ground Motion From Induced Earthquakes

NASA Astrophysics Data System (ADS)

Baltay, A.; Rubinstein, J. L.; Terra, F. M.; Hanks, T. C.; Herrmann, R. B.

2015-12-01

Induced earthquakes in the central United States pose a risk to local populations, but there is not yet agreement on how to portray their hazard. A large source of uncertainty in the hazard arises from ground motion prediction, which depends on the magnitude and distance of the causative earthquake. However, ground motion models for induced earthquakes may be very different than models previously developed for either the eastern or western United States. A key question is whether ground motions from induced earthquakes are similar to those from natural earthquakes, yet there is little history of natural events in the same region with which to compare the induced ground motions. To address these problems, we explore how earthquake source properties, such as stress drop or depth, affect the recorded ground motion of induced earthquakes. Typically, due to stress drop increasing with depth, ground motion prediction equations model shallower events to have smaller ground motions, when considering the same absolute hypocentral distance to the station. Induced earthquakes tend to occur at shallower depths, with respect to natural eastern US earthquakes, and may also exhibit lower stress drops, which begs the question of how these two parameters interact to control ground motion. Can the ground motions of induced earthquakes simply be understood by scaling our known source-ground motion relations to account for the shallow depth or potentially smaller stress drops of these induced earthquakes, or is there an inherently different mechanism in play for these induced earthquakes? We study peak ground-motion velocity (PGV) and acceleration (PGA) from induced earthquakes in Oklahoma and Kansas, recorded by USGS networks at source-station distances of less than 20 km, in order to model the source effects. We compare these records to those in both the NGA-West2 database (primarily from California) as well as NGA-East, which covers the central and eastern United States and Canada

Static stress drop of the largest recorded M 4.6 hydraulic fracturing induced earthquake and its aftershock pattern in the northern Montney Play, British Columbia, Canada

NASA Astrophysics Data System (ADS)

Wang, B.; Harrington, R. M.; Liu, Y.; Kao, H.

2016-12-01

The largest suspected fracking-induced earthquake to date occurred near Fort St. John, British Columbia on August 17, 2015, with a reported magnitude of Mw 4.6. Here we estimate the static stress released by the mainshock and the five cataloged aftershocks using new data from eight broadband seismometers installed approximately 50km from the hypocenter of the mainshock, at distances much closer than the Natural Resources Canada regional seismic stations. The estimated cross-correlation coefficient among the 5 cataloged earthquakes is 0.35 or greater. We will present seismic moment (M0) and spectral corner frequency (fc) values estimated using both individual earthquake spectra and spectral ratios to correct for travel-path attenuation and site effects. Static stress drop and scaled energy value calculations based on the estimated moment and corner frequency values will be presented, as well as focal mechanisms for the largest events with adequate station coverage. We will also use a multi-station matched-filter approach to detect additional uncataloged earthquakes on continuous waveforms for a period of two months after the mainshock. Using the results of the matched-filter approach, we will present the aftershock magnitude distribution and locations. The results of our detection and location calculations will be compared to reported fracking parameters, such as fluid injection pressure and duration, to determine their correlation with the spatial and temporal distribution of aftershocks. The objective of this study is to relate operational parameters to earthquake occurrence in order to help to develop procedures to understand the mechanisms responsible for fracking induced earthquakes, their relation to the maximum induced magnitude, and to reduce potential hazards of anthropogenically induced seismic activity.

Variable anelastic attenuation and site effect in estimating source parameters of various major earthquakes including M w 7.8 Nepal and M w 7.5 Hindu kush earthquake by using far-field strong-motion data

NASA Astrophysics Data System (ADS)

Kumar, Naresh; Kumar, Parveen; Chauhan, Vishal; Hazarika, Devajit

2017-10-01

Strong-motion records of recent Gorkha Nepal earthquake ( M w 7.8), its strong aftershocks and seismic events of Hindu kush region have been analysed for estimation of source parameters. The M w 7.8 Gorkha Nepal earthquake of 25 April 2015 and its six aftershocks of magnitude range 5.3-7.3 are recorded at Multi-Parametric Geophysical Observatory, Ghuttu, Garhwal Himalaya (India) >600 km west from the epicentre of main shock of Gorkha earthquake. The acceleration data of eight earthquakes occurred in the Hindu kush region also recorded at this observatory which is located >1000 km east from the epicentre of M w 7.5 Hindu kush earthquake on 26 October 2015. The shear wave spectra of acceleration record are corrected for the possible effects of anelastic attenuation at both source and recording site as well as for site amplification. The strong-motion data of six local earthquakes are used to estimate the site amplification and the shear wave quality factor ( Q β) at recording site. The frequency-dependent Q β( f) = 124 f 0.98 is computed at Ghuttu station by using inversion technique. The corrected spectrum is compared with theoretical spectrum obtained from Brune's circular model for the horizontal components using grid search algorithm. Computed seismic moment, stress drop and source radius of the earthquakes used in this work range 8.20 × 1016-5.72 × 1020 Nm, 7.1-50.6 bars and 3.55-36.70 km, respectively. The results match with the available values obtained by other agencies.

Seismic Observations Indicating That the 2015 Ogasawara (Bonin) Earthquake Ruptured Beneath the 660 km Discontinuity

NASA Astrophysics Data System (ADS)

Kuge, Keiko

2017-11-01

The termination of deep earthquakes at a depth of 700 km is a key feature for understanding the physical mechanism of deep earthquakes. The 680 km deep 30 May 2015, Ogasawara (Bonin) earthquake (Mw 7.9) and its aftershocks were recorded by seismic stations at distances from 7° to 19°. Synthetic seismograms indicate that the P waveforms depend on whether the earthquake is located above or below the 660 km discontinuity. In this study, I show that broadband recordings indicate that the 2015 earthquake may have occurred below the 660 km velocity discontinuity. Recordings of the P wave from the strongest aftershock lack evidence for wave triplication expected when a subhorizontal discontinuity underlies the hypocenter. Theoretical waveforms computed with a 660 km discontinuity above the aftershock and mainshock match the observed waveforms more accurately. These observations may indicate earthquake ruptures due to mantle minerals other than olivine or strong deformation of the 660 km phase transition.

Infrasonic and seismic signals from earthquakes and explosions observed with Plostina seismo-acoustic array

NASA Astrophysics Data System (ADS)

Ghica, D.; Ionescu, C.

2012-04-01

Plostina seismo-acoustic array has been recently deployed by the National Institute for Earth Physics in the central part of Romania, near the Vrancea epicentral area. The array has a 2.5 km aperture and consists of 7 seismic sites (PLOR) and 7 collocated infrasound instruments (IPLOR). The array is being used to assess the importance of collocated seismic and acoustic sensors for the purposes of (1) seismic monitoring of the local and regional events, and (2) acoustic measurement, consisting of detection of the infrasound events (explosions, mine and quarry blasts, earthquakes, aircraft etc.). This paper focuses on characterization of infrasonic and seismic signals from the earthquakes and explosions (accidental and mining type). Two Vrancea earthquakes with magnitude above 5.0 were selected to this study: one occurred on 1st of May 2011 (MD = 5.3, h = 146 km), and the other one, on 4th October 2011 (MD = 5.2, h = 142 km). The infrasonic signals from the earthquakes have the appearance of the vertical component of seismic signals. Because the mechanism of the infrasonic wave formation is the coupling of seismic waves with the atmosphere, trace velocity values for such signals are compatible with the characteristics of the various seismic phases observed with PLOR array. The study evaluates and characterizes, as well, infrasound and seismic data recorded from the explosion caused by the military accident produced at Evangelos Florakis Naval Base, in Cyprus, on 11th July 2011. Additionally, seismo-acoustic signals presumed to be related to strong mine and quarry blasts were investigated. Ground truth of mine observations provides validation of this interpretation. The combined seismo-acoustic analysis uses two types of detectors for signal identification: one is the automatic detector DFX-PMCC, applied for infrasound detection and characterization, while the other one, which is used for seismic data, is based on array processing techniques (beamforming and frequency

Crustal structure of the St. Elias Mountains region, southern Alaska, from regional earthquakes and ambient noise tomography

NASA Astrophysics Data System (ADS)

Ruppert, N. A.; Stachnik, J. C.; Hansen, R. A.

2011-12-01

STEEP (SainT Elias TEctonics and Erosion Project) is a multi-disciplinary research project that took place in southern Alaska between 2005 and 2010. An important component of this undertaking was installation and operation of a dense array of 22 broadband seismometers to augment and improve the existing regional seismic network in the St. Elias Mountains. This allowed for a lower detection threshold and better accuracy for local seismicity and also provided a rich dataset of teleseismic recordings. While the seismic stations were designed to transmit the data in real time, due to harsh weather and difficult terrain conditions some data were recorded only on site and had to be post-processed months and years later. Despite these difficulties, the recorded dataset detected and located regional earthquakes as small as magnitude 0.5 in the network core area. The recorded seismicity shows some clear patterns. A majority of the earthquakes are concentrated along the coast in a distributed area up to 100 km wide. The coastal seismicity can be further subdivided into 3 distinct clusters: Icy Bay, Bering Glacier, and the Copper River delta. This coastal seismicity is abutted by a somewhat aseismic zone that roughly follows the Bagley Ice Field. Farther inland another active region of seismicity is associated with the Denali Fault system. All this seismicity is concentrated in the upper 25 km of the crust. The only region where earthquakes as deep as 100 km occur is beneath the Wrangell volcanoes in the northwestern corner of the study area. The earthquake focal mechanisms are predominately reverse, with some areas of strike-slip faulting also present. The seismicity patterns and faulting mechanisms indicate a high concentration of thrust faulting in the coastal region. The ambient noise cross correlations from the stations in the STEEP region reveal Rayleigh wave packets with good signal-to-noise ratios yielding well-defined interstation phase velocity dispersion curves

Postseismic deformation of the 1999 Izmit Earthquake (Turkey) - the longest recorded afterslip on a major continental fault

NASA Astrophysics Data System (ADS)

Cakir, Z.; Aslan, G.; Cetin, S.; Dogan, U.; Ergintav, S.; Lasserre, C.; Renard, F.; Reilinger, R. E.

2017-12-01

Studies based on InSAR and GPS observations until 2012 have shown that the central segment of the August 17, 1999 Izmit earthquake rupture on the North Anatolian Fault (NAF) began slipping aseismically following the event. To monitor this long-lasting afterslip and characterize its spatio-temporal behaviour, we calculated InSAR time series based on a single master network and Stanford Method for Persistent Scatterers (StaMPS) PS-InSAR approaches. We use 32 TerraSAR-X (Track 24) radar images acquired between 2011 and 2015 from Supersites Istanbul archive provided by the German Aerospace Center (project Marmara Region Supersite, http://www.earthobservations.org/gsnl.php) and 260 ascending and descending Sentinel 1A/B TOPS images (Track 58 [Asc], 160 [Asc] and 138 [Dsc]) spanning the period from October 2014 until July 2017. Together with InSAR data, measurements from a campaign type GPS network of 35 benchmarks we established in 2013 are also used in analyzing spatial distribution of horizontal creep rate. Our GPS and Persistent Scatterer InSAR (PSI) measurements over the period of past 5 years show that afterslip on the central segment of 1999 Izmit fault rupture is still taking place since the earthquake at an average rate of about 6 mm/year, becoming the longest (i.e. 18 years) recorded afterslip. Decaying logarithmically with time, afterslip appears to have reached a steady rate comparable to the pre- earthquake full fault-crossing rate, suggesting that it may continue for decades and possibly until late in the earthquake cycle. In addition to the stable steady state creep, PS time series reveal at least two transient creep events (creep bursts) in August 2015 and December 2016. Vertical velocity field obtained with decomposition of velocity fields on ascending and descending tracks reveals persistent subsidence on the hangingwall block of the Golcuk fault. It is not clear however if this oblique normal fault in a releasing step over is also creeping or acting as

Source discrimination between Mining blasts and Earthquakes in Tianshan orogenic belt, NW China

NASA Astrophysics Data System (ADS)

Tang, L.; Zhang, M.; Wen, L.

2017-12-01

In recent years, a large number of quarry blasts have been detonated in Tianshan Mountains of China. It is necessary to discriminate those non-earthquake records from the earthquake catalogs in order to determine the real seismicity of the region. In this study, we have investigated spectral ratios and amplitude ratios as discriminants for regional seismic-event identification using explosions and earthquakes recorded at Xinjiang Seismic Network (XJSN) of China. We used a data set that includes 1071 earthquakes and 2881 non-earthquakes as training data recorded by the XJSN between years of 2009 and 2016, with both types of events in a comparable local magnitude range (1.5 to 2.9). The non-earthquake and earthquake groups were well separated by amplitude ratios of Pg/Sg, with the separation increasing with frequency when averaged over three stations. The 8- to 15-Hz Pg/Sg ratio was proved to be the most precise and accurate discriminant, which works for more than 90% of the events. In contrast, the P spectral ratio performed considerably worse with a significant overlap (about 60% overlap) between the earthquake and explosion populations. The comparison results show amplitude ratios between compressional and shear waves discriminate better than low-frequency to high-frequency spectral ratios for individual phases. In discriminating between explosions and earthquakes, none of two discriminants were able to completely separate the two populations of events. However, a joint discrimination scheme employing simple majority voting reduces misclassifications to 10%. In the region of the study, 44% of the examined seismic events were determined to be non-earthquakes and 55% to be earthquakes. The earthquakes occurring on land are related to small faults, while the blasts are concentrated in large quarries.