Filling the Gap: Integrating STEM into Career and Technical Education Middle School Programs

ERIC Educational Resources Information Center

Wu-Rorrer, Ray

2017-01-01

The field of STEM education is an educational framework that has surged in application over the past decade. Science, Technology, Engineering, and Math (STEM) is infused in nearly every facet of our society. Filling the gap of current research in middle school career and technical education (CTE) and STEM programs is important as traditional CTE…

Integration of Sustainable Development in Sanitary Engineering Education in Sweden

ERIC Educational Resources Information Center

Rydhagen, B.; Dackman, C.

2011-01-01

In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering…

Teacher Experiences on the Integration of Modern Educational Games in the Middle School Mathematics Classroom

ERIC Educational Resources Information Center

Ritzhaupt, Albert; Higgins, Heidi; Allred, Beth

2010-01-01

What do experienced teachers have to say about integrating modern educational games into their classroom? This paper addresses this question by exploring the discourse of teachers who were provided professional development, technical support, access to a modern educational game, and flexibility in deciding how to integrate the game in their…

Integrating Science with Technical and Vocational Areas.

ERIC Educational Resources Information Center

Snyder, Larry; Shreckengast, Craig

This guide presents learning activities and lesson plans that integrate science with technical and vocational areas. Activities and plans are organized under broad headings such as Environmental Science and Acid Rain Research; Criminal Justice, Chemistry, and Narcotics; Children's Education and Services; Cosmetology; and Health Professions.…

School-Based Curriculum Development in Career and Technical Education in Taiwan, Republic of China.

ERIC Educational Resources Information Center

Wu, Robert T. Y.

In Taiwan, technological and vocational education (TVE) the equivalent of career and technical education in the United States has undergone several political and social changes and is poised for applying school-based curriculum development (SBCD). Three reasons for adopting SBCD are planning of an integrated curriculum, concept of student-centered…

Standards for Technological Literacy and STEM Education Delivery through Career and Technical Education Programs

ERIC Educational Resources Information Center

Asunda, Paul A.

2012-01-01

At a minimum, employers rely on career and technical education (CTE) and workforce training systems to supply workers able to perform in their jobs. In CTE classes that seek to integrate science, technology, engineering, and mathematics (STEM) concepts, it falls to the instructors to design and sequence the learning experiences that will promote…

Modernizing Career and Technical Education Programs

ERIC Educational Resources Information Center

Drage, Karen

2009-01-01

High-quality career and technical education (CTE) programs can launch America's future competitiveness through increased student engagement, the innovative integration of traditional academic courses, and by meeting the needs of both employers and the economy as a whole. American students failing to keep pace with their international counterparts…

Technology Integration in the Teaching and Learning Process in Career and Technical Education Programs in North Carolina

ERIC Educational Resources Information Center

Jones, Sharon Torrence

2011-01-01

Career and technical education (CTE), historically known as vocational education, is a collective term used to identify high school curricula designed to teach students job skills and prepare them for employment (Lynch, 2000). Transformations in the workforce have created a demand for teachers to be technologically literate and adept at using…

The Effects of Curriculum Integration on the Academic Achievement of Secondary Career and Technical Students

ERIC Educational Resources Information Center

Jones, Patricia Anders

2012-01-01

Using a causal-comparative design, this quantitative study investigated whether or not the curriculum integration of academic subjects with career and technical education classes affected secondary students' academic performance as assessed by scores on standardized tests. The purposive sample was drawn from students in Trade and Industry classes…

Integrating Occupational Health and Safety into TAFE Courses: Curriculum Topics.

ERIC Educational Resources Information Center

Hall, Bob; Mageean, Pauline

This guide is designed to help technical and further education (TAFE) curriculum writers in Australia integrate safety education into vocational education courses. It provides a general overview of occupational health and safety from the perspective of TAFE trade training and a brief summary of the major health and safety issues that might be…

Methodology of a Modern Foreign Language Lesson for Postgraduate Students of Technical Disciplines

ERIC Educational Resources Information Center

Toporkova, Olga; Novozhenina, Elena; Tchechet, Tamara; Likhacheva, Tatiana

2014-01-01

The integration of Russia into the international common space of research and education accompanied by modernization of the national system of education puts forward new demands to postgraduate education. The processes of integration and modernization increase the importance of learning a foreign language for a future scientist. The article deals…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

The Possibilities for Career and Technology Centers when Academic Standards and Accountability Requirements Are Integrated into Competency Based Curricula

ERIC Educational Resources Information Center

Damon, Toni

2010-01-01

As with other fields in education, career and technical education (CTE) has experienced a dramatic transformation since its inception in the 19th century. Since the reauthorization of the Carl D. Perkins Career and Technical Education Act of 2006, there has been limited research on the impact, or possibilities, that recent legislation has had on…

Mature Programs of Study: Examining Policy Implementation at the Local Level. Final Report

ERIC Educational Resources Information Center

Alfeld, Corinne; Bhattacharya, Sharika

2013-01-01

The 2006 Carl D. Perkins Career and Technical Education Act required that all career technical education (CTE) programs offer secondary to postsecondary programs of study (POS), which integrate rigorous academics, offer dual enrollment options, and lead to an industry-recognized degree or credential. Focused on improving students' transition to…

Burns education: The emerging role of simulation for training healthcare professionals.

PubMed

Sadideen, Hazim; Goutos, Ioannis; Kneebone, Roger

2017-02-01

Burns education appears to be under-represented in UK undergraduate curricula. However current postgraduate courses in burns education provide formal training in resuscitation and management. Simulation has proven to be a powerful modality to advance surgical training in both technical and non-technical skills. We present a literature review that summarises the format of current burns education, and provides detailed insight into historic, current and novel advances in burns simulation for both technical and non-technical skills, that can be used to augment surgical training. Addressing the economic and practical limitations of current immersive surgical simulation is important, and this review proposes future directions for integration of innovative simulation strategies into training curricula. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Multimedia as a Means to Enhance Teaching Technical Vocabulary to Physics Undergraduates in Rwanda

ERIC Educational Resources Information Center

Rusanganwa, Joseph

2013-01-01

This study investigates whether the integration of ICT in education can facilitate teaching and learning. An example of such integration is computer assisted language learning (CALL) of English technical vocabulary by undergraduate physics students in Rwanda. The study draws on theories of cognitive load and multimedia learning to explore learning…

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2004-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education over the past 10 years. Standards are seen as a way to achieve better accountability within Career and Technical Education (CTE) systems, and improve their quality as well as…

Balancing Career and Technical Education with Academic Coursework: The Consequences for Mathematics Achievement in High School

ERIC Educational Resources Information Center

Bozick, Robert; Dalton, Benjamin

2013-01-01

Federal legislation has attempted to move career and technical education (CTE) from a segregated component of the high school curriculum to an integrated element that jointly improves both academic and career readiness. However, concerns remain about the ability of CTE to improve academic learning. Using a nationally representative sample of high…

A Computerized Information System Model for Decision Making for the Oklahoma State Department of Vocational and Technical Education.

ERIC Educational Resources Information Center

Smith, Hubert Gene

The objectives of the study presented in the dissertation were to identify present and anticipated information requirements of the various departments within the Oklahoma State Department of Vocational and Technical Education, to design a computerized information system model utilizing an integrated systems concept to meet information…

A Structural Model Proposal for Turkish Faculties of Education Regarding ICT Integration Indicators

ERIC Educational Resources Information Center

Akbulut, Yavuz

2010-01-01

A recent survey study with 2515 pre-service teachers suggested an underlying structure to shelter ICT integration indicators. Eleven indicators were extracted, which were Teaching-Learning Methods, E-learning, E-interaction, Learning Communities, Infrastructure, Access, Ease of Use, Technical Assistance, Policy, Special Education and Health. In…

High School Work and Family Life ITAC [Integrated Technical & Academic Competencies] for Career-Focused Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document contains a guide to implementing the Ohio Work and Family Life ITAC (Integrated Technical and Academic Competencies), which connects to the Ohio Model Competency-Based Program documents in arts, foreign languages, language arts, mathematics, science, and social studies, as well as the Core ITAC document. The Work and Family Life ITAC…

Curriculum Integration: Helping Career and Technical Education Students Truly Develop College and Career Readiness

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Richardson, George B.

2017-01-01

All students need to learn how to read, write, solve mathematics problems, and understand and apply scientific principles to succeed in college and/or careers. The challenges posed by entry-level career fields are no less daunting than those posed by college-level study. Thus, career and technical education students must learn effective math,…

Separate and Unequal at Hillsborough High: A Principal's Challenges in Integrating "Academic" and Career and Technical Education Coursework

ERIC Educational Resources Information Center

Malin, Joel R.; Hackmann, Donald G.

2015-01-01

Dr. Edward White, Hillsborough High School principal, has decided to allocate faculty in-service time to address an unproductive chasm between academic and career and technical education programming within the school, which has created tensions among the faculty. On returning to his office after the professional development session, which was…

The CORE Community: Career and Technical Education Teachers' Perceptions of the Common Core State Standards

ERIC Educational Resources Information Center

Stair, Kristin S.; Warner, Wendy J; Hock, Gaea; Conrad, Michelle; Levy, Natalie

2016-01-01

The Common Core State Standards (CCSS) have been adopted in 43 states within the U.S. However, Career and Technical Education (CTE) teachers are often unsure how their programs can successfully integrate CCSS. The purpose of this study was to understand how participants in a CCSS professional development project perceive the CCSS and how they are…

A History of Women in the Trades for Integration with the Gender Equity in Education and the Workplace Curriculum.

ERIC Educational Resources Information Center

Grey, Morgan, Comp.

This document, which was originally intended to complement a curriculum titled "Gender Equity in Education and the Workplace," is a compilation of the historical contributions made by women in trade and technical careers that may be used as a source of materials suitable for integration into existing trade and industrial education programs.…

Integrative Curriculum Planning in Technological and Vocational Education in Taiwan, Republic of China.

ERIC Educational Resources Information Center

Wu, Robert T. Y.

Taiwan is facing these three challenges: cultivating a world-class work force, preventing shortages of industry-related workers, and increasing industrial competitiveness. To meet them, technological and vocational education (TVE) needs to integrate the curricula among the technical arts programs in junior high schools, senior vocational high…

Integration of Behaviour-Based Safety Programme into Engineering Laboratories and Workshops Conceptually

ERIC Educational Resources Information Center

Koo, Kean Eng; Zain, Ahmad Nurulazam Md; Zainal, Siti Rohaida Mohamed

2012-01-01

The purpose of this conceptual research framework is to develop and integrate a safety training model using a behaviour-based safety training programme into laboratories for young adults, during their tertiary education, particularly in technical and vocational education. Hence, this research will be investigating the outcome of basic safety…

Attributes Affecting the Acceptance and Integration of Best Practices in Secondary Professional-Technical Education (PTE): A Mixed-Methods Study

ERIC Educational Resources Information Center

Nevill, Harold Anderson

2010-01-01

This mixed-methods study examined which attributes Professional-Technical Education (PTE) teachers desire to see in the best practices presented to them. The study used data from two separate pilot studies to create a survey administered during the June, 2009 PTE summer conference; which was returned by 229 responders; and in addition used to…

NASA SCIENTIFIC AND TECHNICAL INFORMATION (STI) PROGRAM PLAN

EPA Science Inventory

NASA's scientific and technical information (STI) is an essential product of research, facilitates technology transfer, and enhances the competitive edge of U.S. companies and educational institutions. NASA's STI is an integral part of NASA's information transfer and is critical...

Education in Environmental Chemistry: Setting the Agenda and Recommending Action

ERIC Educational Resources Information Center

Zoller, Uri

2005-01-01

The effective utilization of Education in Environmental Chemistry (EEC) in addressing global and societal environmental problems requires integration between educational, technical, financial, ethical and societal considerations. An interdisciplinary approach is fundamental to efforts to achieve long-term solutions.

SWIFT Intensive Technical Assistance Process. Technical Assistance Brief #1

ERIC Educational Resources Information Center

Sailor, Wayne; McCart, Amy; McSheehan, Michael; Mitchiner, Melinda; Quirk, Carol

2014-01-01

The national center on Schoolwide Integrated Framework for Transformation (SWIFT Center) is now approaching the halfway point in its first full year of providing intensive technical assistance (TA) to 68 schools in 20 local educational agencies across five states. The purpose of this brief is to provide a thumbnail sketch of how this TA process…

Nourish and Nurture: World Food Programme Assistance for Early Childhood Education in India's Integrated Child Development Services. Education Sector Monograph No. 3.

ERIC Educational Resources Information Center

Siraj-Blatchford, Iram

Part of UNESCO's Action Research in Family and Early Childhood series, this monograph is based upon a technical report on the Early Childhood Education (ECE) component of the Integrated Child Development Services (ICDS) program in India. This document overviews the ICDS and how better use could be made of World Food Programme (WFP) food aid along…

Integration of Multimedia Courseware into ESP Instruction for Technological Purposes in Higher Technical Education

ERIC Educational Resources Information Center

Tsai, Shu-Chiao

2012-01-01

This study reports on integrating ESP (English for specific purposes) multimedia courseware for semiconductor technology into instruction of three different language programs in higher education by using it as a silent partner. It focuses primarily on techniques and tools to motivate retention of under-prepared students in an EFL setting. The…

Accomplishments and challenges of surgical simulation.

PubMed

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

A Model for Professional Education in the 21st Century: Integrating Humanities and Engineering through Writing.

ERIC Educational Resources Information Center

Olds, Barbara M.; Miller, Ronald L.

The "HumEn" (Humanities/Engineering Integration) program developed at the Colorado School of Mines integrates humanities and engineering through reading and writing. Through integrative reading and writing engineering students are led to make appropriate connections between the humanities and their technical work, connections that will…

Vocational Education in Algeria, Egypt, and Morocco: The Crisis and its Lessons.

ERIC Educational Resources Information Center

Salmi, Jamil

1990-01-01

Examines developments in vocational and technical education systems in Algeria, Egypt, and Morocco. Argues each system faces critical problems resulting from demographic pressures, educational demand, lack of funding, and job placement difficulties. Recommends programs should reflect industry's needs, urging integration between general and…

Lessons Learned from Breaking Through. In Brief

ERIC Educational Resources Information Center

Bragg, Debra D.; Barnett, Elisabeth

2009-01-01

The Breaking Through (BT) initiative promotes an expanded and enhanced role for community colleges in providing access to college for low-skilled adults. BT is uniquely important in its systematic integration of adult education, developmental/remedial education, professional-technical education (PTE), and career planning and preparation in…

Integrating Science and Technology into a Policy of Lifelong Education in Nigeria.

ERIC Educational Resources Information Center

Urevbu, Andrew O.

1985-01-01

Examines Nigeria's National Policy on Education guidelines, specifically focusing on science and technological education. Discusses the development of vocational and technical schools, transfer of technology, and the role of research institutes. Recommendations are made concerning academic survival skills, respect for manual skills, improved…

Inventory of greenhouse gas emissions from on-road vehicles in Midwestern USA States and integrated approach to achieving environmental sustainability in transportation : USDOT Region V Regional University Transportation Center final report : technical su

DOT National Transportation Integrated Search

2016-12-29

Two project objectives one technical and one educational- were laid out in this project. The technical objective was to assess current inventory of greenhouse gases (GHG) in the six Midwestern states of the nation and to estimate improvements as ...

The Humanities in the Two-Year Agricultural Technical College.

ERIC Educational Resources Information Center

Nelson, Ronald J.

Drawing from the experiences of the University of Minnesota Technical College, Waseca (UMW), this paper provides a rationale and suggestions for promoting and integrating the humanities in vocational education. After discussions of the problems of interesting occupational students in humanities courses and the value of humanities instruction in…

WHOLE SYSTEMS, INTEGRATED SITE DESIGN FOR EDUCATION (WISE) WEBSITE: AN INTERACTIVE WEBSITE FOR EDUCATORS AND STUDENTS

EPA Science Inventory

Technical Challenge to Sustainability: Students who engage with their environment develop values that promote sustainability and perform better on standardized tests [1]. While there are many websites that focus on sustainability education and students, there is no in...

Vocational Training or Value Shaping: One Approach to Education in the 1990's.

ERIC Educational Resources Information Center

Jackson, Stephen

Balancing the vocational and educational components in technical institutions today is difficult, requiring that faculty and administrators have vision, political realism, moral integrity, and energy. To understand better the rationale which underlies present forms of nonuniversity, postsecondary college education, a study was conducted at three…

General Purpose Sampling in the Domain of Higher Education.

ERIC Educational Resources Information Center

Creager, John A.

The experience of the American Council on Education's Cooperative Institutional Research Program indicates that large-scale national surveys in the domain of higher education can be performed with scientific integrity within the constraints of costs, logistics, and technical resources. The purposes of this report are to provide complete and…

Effective Practices in STEM Integration: Describing Teacher Perceptions and Instructional Method Use

ERIC Educational Resources Information Center

Smith, Kasee L.; Rayfield, John; McKim, Billy R.

2015-01-01

Career and Technical Education (CTE), including agricultural education, has been suggested as a platform for delivering Science, Technology, Education, and Mathematics (STEM) content in secondary classrooms (Stone, 2011). The purpose of this descriptive study was to describe agriculture teachers' perceptions and confidence levels for integrating…

Washington State's Integrated Basic Education and Skills Training Program (I-BEST): New Evidence of Effectiveness. CCRC Working Paper No. 20

ERIC Educational Resources Information Center

Zeidenberg, Matthew; Cho, Sung-Woo; Jenkins, Davis

2010-01-01

To increase the rate at which adult basic skills students advance to and succeed in college-level occupational programs, the Washington State Board for Community and Technical Colleges (SBCTC) developed the Integrated Basic Education and Skills Training, or I-BEST. In the I-BEST model, a basic skills instructor and an occupational instructor team…

Business and the Liberal Arts: Integrating Professional and Liberal Education. Report of a Symposium on the Liberal Arts and Business

ERIC Educational Resources Information Center

Paris, David C.

2007-01-01

The Council of Independent Colleges (CIC) convened the "Symposium on Business and the Liberal Arts: Integrating Professional and Liberal Education" in Chicago in May 2007 out of concern that the proportion of students graduating with degrees in the liberal arts has been declining as preprofessional and technical programs have expanded and the…

Development and Preliminary Technical Adequacy of the Schoolwide Integrated Framework for Transformation Fidelity of Implementation Tool

ERIC Educational Resources Information Center

Algozzine, Bob; Morsbach Sweeney, Holly; Choi, Jeong Hoon; Horner, Rob; Sailor, Wayne; McCart, Amy B.; Satter, Allyson; Lane, Kathleen Lynne

2017-01-01

U.S. public education systems are required to provide free appropriate public education to students with disabilities in least restrictive environments that are appropriate to meet their individual needs. The practice of educating students with disabilities in neighborhood schools in age-appropriate general education classrooms and other school…

Career-Focused Education for Ohio's Students: Sample Instructional Units. Integrated Technical and Academic Competencies (ITAC).

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This book is designed to help academic teachers in middle or secondary education develop an appreciation of career-focused education and begin the process of designing career-focused instruction. (Career-focused instruction is educational programming in which curriculum content and learning experiences clearly connect to the world of work.) For…

Course of Study: Occupational, Vocational, and Technical Education: Phase 3--8th Grade. Exploratory Education.

ERIC Educational Resources Information Center

Pittsburgh Board of Public Education, PA.

The curriculum guide outlines learning patterns which may be adapted or adopted by the creative teacher in occupational education. Emphasis is placed on processes basic to specific job activities found within the areas of: (1) business education, (2) home economics, and (3) industrial arts. Students are able to associate, integrate, and catalog…

Technology Diffusion. [SITE 2001 Section].

ERIC Educational Resources Information Center

Strudler, Neal, Ed.; Niederhauser, Dale S., Ed.

This document contains the following papers on technology diffusion from the SITE (Society for Information Technology & Teacher Education) 2001 conference: (1) "A Response to Technology Integration in Teacher Education for Merit, Tenure, and Promotion" (Cindy L. Anderson and David Starrett); (2) "Online Technical Support…

[Integration of fundamental and applied medical and technical research made at the department of the biomedical systems, Moscow State Institute of Electronic Engineering].

PubMed

Selishchev, S V

2004-01-01

The integration results of fundamental and applied medical-and-technical research made at the chair of biomedical systems, Moscow state institute of electronic engineering (technical university--MSIEE), are described in the paper. The chair is guided in its research activity by the traditions of higher education in Russia in the field of biomedical electronics and biomedical engineering. Its activities are based on the extrapolation of methods of electronic tools, computer technologies, physics, biology and medicine with due respect being paid to the requirements of practical medicine and to topical issues of research and design.

The Effect of Field Specialization Variation on Technological Pedagogical Content Knowledge (TPACK) among Malaysian TVET Instructors

ERIC Educational Resources Information Center

Chua, Junnaina Husin; Jamil, Hazri

2014-01-01

Technological Knowledge is directly related to productivity, enhanced performance and service quality. Technology integration in the Technical and Vocational Education and Training (TVET) curriculum is expected due to high application of technical knowledge and technology applications. TPACK is a professional knowledge framework that gives…

Information Systems as a Social Space: Collaborative Teaching of Social Literacies to Technical Students

ERIC Educational Resources Information Center

Kalil, Claudia; Monson, Jo; Nodoba, Gaontebale

2010-01-01

This article describes a successful experimental collaborative teaching project to deliver a short course to develop work-relevant social literacies in technical students. Heterogeneous work contexts require both students and educators to find ways to integrate thinking and practices across disciplines. Teaching social literacies to information…

TSA and Standards-Based Learning through TECH-Know

ERIC Educational Resources Information Center

Taylor, Jerianne S.; Peterson, Richard E.; Ernst, Jeremy

2005-01-01

Career and technical student organizations (CTSOs) serve as an integral part of many career and technical education (CTE) programs across the country. Their activities and competitions make up many of the strongest CTE programs due to their co-curricular nature. With memberships ranging from tens of thousands to almost a half million, it is hard…

A Guide for Vocational Energy Education: Resources, Key People, Classroom Materials. Oregon Vocational Energy Education Project.

ERIC Educational Resources Information Center

Oregon Vocational Association, Gervais.

Intended as a resource tool for integrating energy and conservation education into the vocational skills areas, this resource guide consists of listings of instructional and technical materials pertaining to 14 vocational curriculum areas. These areas are agriculture, agriculture/agribusiness, architecture, automotive, business, construction,…

A Never Ending Journey: Inclusive Education Is a Principle of Practice, Not an End Game

ERIC Educational Resources Information Center

Kozleski, Elizabeth B.; Yu, Ting; Satter, Allyson L.; Francis, Grace L.; Haines, Shana J.

2015-01-01

A team from Schoolwide Integrated Framework for Transformation (SWIFT), a federally funded technical assistance project focused on creating cascading, aligned systems for inclusive education, conducted a series of focus groups and interviews with school administrators, general and special educators, and related service providers in six schools…

Centralized Workshops in Singapore. Education and Work 1.

ERIC Educational Resources Information Center

Singh, P. Harbans

First in an education and work series on innovative vocational training programs in Asian countries, this booklet describes the program in Singapore of integrating technical studies with general education at the lower secondary level through centralized workshops that provide training for students from all types of secondary schools in a region.…

Teaching "Community Engagement" in Engineering Education for International Development: Integration of an Interdisciplinary Social Work Curriculum

ERIC Educational Resources Information Center

Gilbert, Dorie J.; Held, Mary Lehman; Ellzey, Janet L.; Bailey, William T.; Young, Laurie B.

2015-01-01

This article reviews the literature on challenges faced by engineering faculty in educating their students on community-engaged, sustainable technical solutions in developing countries. We review a number of approaches to increasing teaching modules on social and community components of international development education, from adding capstone…

Traditional Craft or Technology Education: Development of Students' Technical Abilities in Finnish Comprehensive School

ERIC Educational Resources Information Center

Autio, Ossi

2016-01-01

Changes in the economy, nature, production and society together with increasing scientific and technological knowledge make demands of transforming school teaching in the field of technology education. The aim of the article is briefly to explore the integration between science, technology and traditional craft education by analyzing the current…

Communication and Integrated Rural Development.

ERIC Educational Resources Information Center

Information Center on Instructional Technology Report, 1976

1976-01-01

In discussing communication planning and integrated rural development, Philip H. Coombs, Manzoor Ahmed, and Pratima Kale of the International Council for Educational Development stress that communication planning must deal with problems in behavioral and not just technical terms. Communication planners must be able to work with experts from other…

Integrating Quality Concepts into TAFE Courses.

ERIC Educational Resources Information Center

Hayton, Geoff; And Others

This document contains the written outcomes from a 1988 project designed to result in the development and integration of instruction on quality into existing Australia's technical and further education (TAFE) courses. The document is intended for TAFE senior staff, staff developers, teaching staff, and curriculum developers; and senior management…

Credit with Education: A Promising Title II Microfinance Strategy--Supporting Integrated Food Security and Nutrition Programs To Improve Health and Well-Being of Women and Children). Food and Nutrition Technical Assistance.

ERIC Educational Resources Information Center

Dunford, Christopher; Denman, Vicki

This paper introduces the reader to microfinance integrated with health and nutrition education as a promising strategy for Title II practitioners. The paper provides an overview of how microfinance, particularly village banking, can contribute to the food-security objectives of Title II. It describes a variant of village banking, called…

Exploring the Technical Expression of Academic Knowledge: The Science-in-CTE Pilot Study

ERIC Educational Resources Information Center

Pearson, Donna; Young, R. Brent; Richardson, George B.

2013-01-01

The Science-in-CTE pilot study tested a curriculum integration model that enhanced the science that oc-curs in CTE curricula. The study replicated the National Research Center for Career and Technical Ed-ucation's (NRCCTE) Math-in-CTE experimental research design (Stone, Alfeld, & Pearson, 2008) with applied science in secondary agricultural…

Criminal Justice. [FasTrak Specialization Integrated Technical and Academic Competency (ITAC).] 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This curriculum for a criminal justice program is designed for students interested in pursuing a future in law enforcement or a related public safety profession. The criminal justice program in the career-technical and adult education center is a two-year curriculum that is divided into these 14 units: orientation; legal aspects; communication…

AIDS: An ICT Model for Integrating Teaching, Learning and Research in Technical University Education in Ghana

ERIC Educational Resources Information Center

Asabere, Nana; Togo, Gilbert; Acakpovi, Amevi; Torby, Wisdom; Ampadu, Kwame

2017-01-01

Information and Communication Technologies (ICT) has changed the way we communicate and carry out certain daily activities. Globally, ICT has become an essential means for disseminating information. Using Accra Technical University in Ghana as a case study, this paper proposes an ICT model called Awareness Incentives Demand and Support (AIDS). Our…

Dodging Marshmallows: Simulations to Teach Ethics

ERIC Educational Resources Information Center

Weidman, Justin; Coombs, Dawan

2016-01-01

Students had just participated in an experiential learning exercise where they played dodgeball using marshmallows, but the unique context of the game introduced ethical dilemmas that integrated ethics education into a technical education classroom setting. Research shows that "Engineering curriculum and activities at the K-12 level should be…

The Scottish Centre for Mathematics, Science and Technical Education

ERIC Educational Resources Information Center

Sandercock, E. R.

1977-01-01

The Centre's functions are described. A flow diagram, developed for the Scottish Integrated Science Course, showing a modular approach to science for mixed ability or low ability students is given. This course is intended for students in their first two years of secondary education. (AJ)

An Integrated Strategy for an Apparel Design Curriculum

ERIC Educational Resources Information Center

Bye, Elizabeth; Labat, Karen L.

2005-01-01

The core of apparel design education is the studio experience. This article discusses an Integrated Apparel Design Curriculum model built on a foundation of creative and technical experimentation and learning which contributes to developing abstract thinking skills. Various learning styles are supported as students work through the design process…

Multiplatform E-Learning Systems and Technologies: Mobile Devices for Ubiquitous ICT-Based Education

ERIC Educational Resources Information Center

Goh, Tiong Thye, Ed.

2010-01-01

Multiplatform e-learning systems are emerging technologies that provide integrated learning content to various accessing devices. This book addresses technical challenges, design frameworks, and development experiences of the future that integrate multiple mobile devices into a single multiplatform e-learning system. With expert international…

The Pedagogical Readiness of Instructors towards Achieving Integration of ICT's in TVET Institutions in Kenya

ERIC Educational Resources Information Center

Maina, Tirus Muya; Ogalo, James; Mwai, Naomi

2016-01-01

This paper points to the necessity to conduct research on the pedagogical readiness of instructors towards achieving integration of ICT's in Technical and Vocational Education and Training (TVET) institutions in Kenya. Research on the integration of ICTs in teaching and learning in TVET institution in Kenya have been done to improve the learning…

Linking Reflection and Technical Competence: The Logbook as an Instrument in Teacher Education.

ERIC Educational Resources Information Center

Korthagen, Fred A. J.

1999-01-01

Describes a framework for integrating reflection and teacher competency development into teacher education programs, introducing a spiral model for reflection, standard reflection questions, and a method of structuring logbooks, all designed to develop a competency for self-directed professional growth in interpersonal classroom behavior. An…

Fostering Trust in Outdoor Leaders: The Role of Personal Attributes

ERIC Educational Resources Information Center

Shooter, Wynn; Paisley, Karen; Sibthorp, Jim

2012-01-01

This study examined trust development between participants of outdoor education programs and outdoor leaders. Participants were college students enrolled in outdoor education courses. Using a factorial survey design, the technical ability, interpersonal ability, benevolence, integrity, and gender of an outdoor leader was displayed randomly in a…

Creation of an Integrated Environment to Supply e-Learning Platforms with Office Automation Features

ERIC Educational Resources Information Center

Palumbo, Emilio; Verga, Francesca

2015-01-01

Over the last years great efforts have been made within the University environment to implement e-learning technologies in the standard educational practice. These learning technologies distribute online educational multimedia contents through technological platforms. Even though specific e-learning tools for technical disciplines were already…

Career Education Instructional Guide.

ERIC Educational Resources Information Center

State Univ. of New York, Oswego. Coll. at Oswego. Dept. of Industrial Arts and Technology.

The guide is designed primarily for industrial arts teachers at the middle school level who wish to integrate career education into their curricula. The lessons and activities attempt to establish a balance among career information, technical information, and hands-on experience. The guide contains six lesson plans which cover the topics: the…

Practical Literacy Matters: Teacher Confidence Is Key

ERIC Educational Resources Information Center

Santamaria, Laura A.; Taylor, Marissa K.; Park, Travis D.; Keene, Barrett L.; van der Mandele, Elizabeth

2010-01-01

Literacy is important to career and technical education (CTE) teachers, who strive to integrate core academic and cognitive skills and knowledge into their classrooms. There is little question that educators need to continually address literacy within CTE. Rather, the issue for many CTE teachers and administrators becomes how to effectively…

Schools, Technology, and Educational Leadership: A Framework for Change.

ERIC Educational Resources Information Center

Bennett, Christene K.

1996-01-01

If technology is to be integrated into the school curriculum, the meaning of educational leadership and the role of principals within a technical paradigm must be redefined. Principals are responsible for defining and communicating a mission, managing curriculum and instruction, training and evaluating teachers, monitoring student progress,…

Integrating the Science of Team Training: Guidelines for Continuing Education

ERIC Educational Resources Information Center

Weaver, Sallie J.; Rosen, Michael A.; Salas, Eduardo; Baum, Karyn D.; King, Heidi B.

2010-01-01

The provision of high-quality, efficient care results from the coordinated, cooperative efforts of multiple technically competent health care providers working in concert over time, spanning disciplinary and professional boundaries. Accordingly, the role of medical education must include the development of providers who are both expert clinicians…

Effectiveness, Improvement and Educational Change: A Distinctively Canadian Approach?

ERIC Educational Resources Information Center

Hargreaves, Andy; Fink, Dean

1998-01-01

A distinctive Canadian school of thought on educational change is inclined to synthesize diverse bodies of work and integrate nonrational and emotional dimensions with rational and technically effective ones in a socially critical way. Highlights the Canadian perspective through discussions about complex systems, contexts of change, critical…

Review of Department of Defense Education Activity (DoDEA) Schools. Volume II: Quantitative Analysis of Educational Quality. IDA Paper.

ERIC Educational Resources Information Center

Anderson, Lowell Bruce; Bracken, Jerome; Bracken, Marilyn C.

This volume compiles, and presents in integrated form, the Institute for Defense Analyses' (IDA) quantitative analysis of educational quality provided by the Department of Defense's dependent schools. It covers the quantitative aspects of volume 1 in greater detail and presents some analyses deemed too technical for that volume. The first task in…

Small Business Ownership Management Entrepreneurship. A Model for Vocational Education Program Development in Entrepreneurship.

ERIC Educational Resources Information Center

Arkansas Univ., Fayetteville.

This guide for instruction in the basics of entrepreneurship is intended for use in adult education programs, and secondary and postsecondary business education programs. It can be used as integrative material for all vocational-technical programs as well, since it provides a beginning point for those who are interested in self-employment and for…

Exploration of NSF-ATE Projects Approaches in the Integration of Technology and Engineering Education at the K-12 Levels

ERIC Educational Resources Information Center

Strobel, Johannes; Mendoza Díaz, Noemi V.

2012-01-01

Access to post-secondary education, specifically in the technical, two-year institution area, is a topic of growing interest in the country. Funding agencies, such as NSF, via the Advanced Technological Education Program (ATE), are supporting initiatives and research aimed at increasing the number of technicians and engineers and improving…

Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

NASA Astrophysics Data System (ADS)

Tang, Xiaofeng

Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

Why Integrating Technology Has Been Unsuccessful in Kuwait? An Exploratory Study

ERIC Educational Resources Information Center

Alfelaij, Bader

2016-01-01

In Kuwait, unsuccessful attempts to use and integrate technology into classrooms and lecture halls are currently being witnessed in schools and higher education institutions. Such failure is believed to be the consequence of various challenges, such as cultural, technical and contextual challenges. In this exploratory study, the researcher has…

An Integrated Parent-Teacher-Related Service Team Approach to Communication Intervention. Final Report.

ERIC Educational Resources Information Center

Stremel, Kathleen; Wilson, Rebecca

This final report describes a federally funded 3-year project for integrating related services within educational objectives for children (ages 3-10) with dual vision and hearing impairments. A Training-Utilization model of inservice training and technical assistance was developed, implemented, and evaluated to address the communication needs of…

Integrated and Applied Curricula Discussion Group and Data Base Project. Final Report.

ERIC Educational Resources Information Center

Wisconsin Univ. - Stout, Menomonie. Center for Vocational, Technical and Adult Education.

A project was conducted to compile integrated and applied curriculum resources, develop databases on the World Wide Web, and encourage networking for high school and technical college educators through an Internet discussion group. Activities conducted during the project include the creation of a web page to guide users to resource banks…

Real Integration--Where the Rubber Meets the Road

ERIC Educational Resources Information Center

Moye, Johnny J.

2011-01-01

Integration of core academics into career and technical education (CTE) is not new. Putting core academics into context, CTE courses provide an excellent platform for students to learn the relevance of science, technology, engineering, and mathematics (STEM) as well as literature, arts, and social studies. Students learn to use this information by…

Organizational Support of Technology Integration in One School in Lebanon

ERIC Educational Resources Information Center

Zgheib, Rosine S.

2013-01-01

Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

Adopting a Design-Thinking Multidisciplinary Learning Approach: Integrating Mobile Applications into a Marketing Research Course

ERIC Educational Resources Information Center

Zarzosa, Jennifer

2018-01-01

This article seeks to address the gap between marketing education and marketing practice by integrating a design-thinking (DT) methodology to the marketing research (MR) framework to achieve learning objectives that will enhance cross-functional, collaborative, conceptual, and technical skills. The mobile application marketing research project…

Technohubs in Teacher Education: The Lived Experience of Assisting Peers with Instructional Technology Issues

ERIC Educational Resources Information Center

Rook, Michael Montalto

2014-01-01

This study examined prospective teachers' lived experiences of assisting peers with instructional technology issues. The study built upon one of ISTE's (2003) essential conditions for integrating technology in education: technical assistance for using technology. Through a review of relevant literature, an argument was made for the study based on…

Preparing Workers for Successful Careers

ERIC Educational Resources Information Center

Reese, Susan

2010-01-01

No doubt career and technical education (CTE) is integral in preparing a skilled workforce for today's jobs. Hands-on training is an important element of the CTE classroom, and when that occurs in an actual workplace setting, it may be called internship, apprenticeship or cooperative education. Whatever term is applied, it is another way in which…

Shaping Perceptions of Delaware Technical & Community College through a Comprehensive Brand Marketing Strategy

ERIC Educational Resources Information Center

Sciple, Judith A.

2010-01-01

Community colleges are an integral part of the American higher education system, providing open access to postsecondary education to all who have the ability to benefit. These institutions, however, often suffer from negative perceptions regarding their effectiveness and quality of instruction. Community colleges can address these perceptions by…

Today's Adult Students

ERIC Educational Resources Information Center

Reese, Susan

2012-01-01

Who are the adult students in career and technical education (CTE) today? There is not one simple answer to that question. Some are young with little life experience, while others are returning to the workforce and learning new skills to reinvent themselves. Whatever the case, educating adult students is an integral part of ACTE's mission, and the…

Development and Evaluation of a Vocational Experience Curriculum for Educable and Disadvantaged Students. Final Report.

ERIC Educational Resources Information Center

Hardin County Board of Education, Elizabethtown, KY.

A project was designed to measure the effects of integrating basic reading and mathematical instruction with prevocational instruction through the addition of a basic skills resource room, a technical simulation unit, and guidance and counseling to the ninth grade vocational experience program for educable mentally handicapped and disadvantaged…

Technical Problems Experienced in the Transformation of Virtual Worlds into an Education Environment and Coping Strategies

ERIC Educational Resources Information Center

Coban, Murat; Karakus, Turkan; Karaman, Asiye; Gunay, Fatma; Goktas, Yuksel

2015-01-01

Research into virtual worlds demonstrates that to successfully use virtual world platforms in different disciplines, certain limitations and potential difficulties of these platforms must be overcome. The current study extends previous research by investigating problems in integrating virtual worlds in education with a longitudinal observation of…

A Regional ETV Network: Community Needs and System Structure. Technical Report 791.

ERIC Educational Resources Information Center

Hershkowitz, Martin

A systems analysis of a community educational television (ETV) structure and of community needs was made in three counties of Appalachian Maryland to see whether an ETV system could meet integrated needs of public school students, disadvantaged families, educators, health service groups, police and fire departments, and business/industry across…

Organizational Change, Informal Learning, and Adaptation: Emerging Trends in Training and Continuing Education.

ERIC Educational Resources Information Center

Kozlowski, Steve W. J.

1995-01-01

Trends such as technological innovation, downsizing, self-managed teams, and continuous learning imply that in continuing education technical content must be considered in the context in which skills are used. Knowledge of learning processes and workplace socialization suggests that formal training and informal learning must be integrated to…

"I Myself Want to Build": Women, Architectural Education and the Integration of Germany's Technical Colleges

ERIC Educational Resources Information Center

Stratigakos, Despina

2007-01-01

This article reconstructs women's entry into the architecture classrooms of Germany's "Technische Hochschulen," which were, and remain, the nation's primary institutions for training architects. Created in the 1860s and '70s to supply an industrializing nation with well-educated engineers and building officials, these elite colleges…

Problems of Technical Standards Teaching in the Context of the Globalization and Euro-Integration in Higher Education System of Ukraine

ERIC Educational Resources Information Center

Kornuta, Olena; Pryhorovska, Tetiana

2015-01-01

Globalization and Ukraine association with EU imply including Ukrainian universities into the world scientific space. The aim of this article is to analyze the problem of drawing standards teaching, based on the experience of Ivano-Frankivsk National Technical University of Oil and Gas (Ukraine) and to summarize the experience of post Soviet…

Design Effects and Generalized Variance Functions for the 1990-91 Schools and Staffing Survey (SASS). Volume II. Technical Report.

ERIC Educational Resources Information Center

Salvucci, Sameena; And Others

This technical report provides the results of a study on the calculation and use of generalized variance functions (GVFs) and design effects for the 1990-91 Schools and Staffing Survey (SASS). The SASS is a periodic integrated system of sample surveys conducted by the National Center for Education Statistics (NCES) that produces sampling variances…

Content and Language Integrated Learning in Higher Technical Education Using the "InGenio" Online Multimedia Authoring Tool

ERIC Educational Resources Information Center

Gimeno, Ana; Seiz, Rafael; de Siqueira, Jose Macario; Martinez, Antonio

2010-01-01

The future professional world of today's students is becoming a life-long learning process where they have to adapt to a changing market and an environment full of new opportunities and challenges. Thus, the development of a number of personal and professional skills, in addition to technical content and knowledge, is a crucial part of their…

Digital video applications in radiologic education: theory, technique, and applications.

PubMed

Hennessey, J G; Fishman, E K; Ney, D R

1994-05-01

Computer-assisted instruction (CAI) has great potential in medical education. The recent explosion of multimedia platforms provides an environment for the seemless integration of text, images, and sound into a single program. This article discusses the role of digital video in the current educational environment as well as its future potential. An indepth review of the technical decisions of this new technology is also presented.

After Integration; Problems of Race Relations in the High School Today. A Study of Madison High School with Recommendations for New York City Schools.

ERIC Educational Resources Information Center

New York City Commission on Human Rights, NY.

This report first presents a narrative and analysis of the process and aftermath of the integration of Madison High School in Brooklyn, New York City. Then 13 recommendations are stated, among which are the following: (1) Board of Education should establish a special unit to provide technical assistance for integrated schools; (2) the New York…

Curriculum Advancement for Work Force Colleges: The Nicolet College Process.

ERIC Educational Resources Information Center

Bass, Howard G. Sam

The rapid growth since the 1980s of the use of total quality workforce methods in U.S. companies has contributed to the movement for integrating academic and vocational/technical education. This integration seeks to improve the intellectual capabilities of students through applied and contextual learning and thus make them more capable of adapting…

Making Communication Matter: Integrating Instruction, Projects and Assignments to Teach Writing and Design

ERIC Educational Resources Information Center

Riddell, William T.; Courtney, Jennifer; Constans, Eric; Dahm, Kevin; Harvey, Roberta; von Lockette, Paris

2010-01-01

An integrated technical writing and design course has been developed at Rowan University. This course was developed using aspects of project-based learning and recent discussions about design education, as well as pedagogical approaches from the write-to-learn and the writing in the disciplines (WID) movements. The result is a course where the…

SWIFT Center State Education Agency Blueprint for Equity-Based Inclusive Reform: Implementing, Sustaining, and Scaling up SWIFT in States

ERIC Educational Resources Information Center

Beitz, Linda M.; Mitchiner, Melinda; Sailor, Wayne; Nelson, Loui Lord

2016-01-01

This blueprint provides an overview of the technical assistance (TA) practices and collaborative learning structures that support state education agencies (SEAs) in whole system implementation of Schoolwide Integrated Framework for Transformation (SWIFT) Domains and Features, and in the development of state-level infrastructure hospitable to…

Evaluating the Impacts of Technology Education on Military Maintenance Students

ERIC Educational Resources Information Center

Jordan, Jeremy D.; Curtis, Christopher

2010-01-01

The United States Air Force (USAF) provides career and technical education (CTE) to a wide variety of specialty career fields. Training airmen to carry out the mission while honoring the USAF core values of integrity first, service before self, and excellence in all we do is the top priority of military leaders and trainers. Vehicle maintenance is…

"Leading Institutions of Higher Learning" or "Research Universities"?

ERIC Educational Resources Information Center

Dezhina, I.

2005-01-01

The necessity of integrating science and education was proclaimed a strategic objective of scientific and technical development as far back as the late 1980s, when it had become clear that the economic mechanism was not effective and that a number of fundamental changes were needed. The support of the strongest institutions of higher education was…

Harnessing the Environmental Professional Expertise of Engineering Students--The Course: "Environmental Management Systems in the Industry"

ERIC Educational Resources Information Center

Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

2010-01-01

More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with…

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

Mathematics as Liberal Education: Whitehead and the Rhythm of Life

ERIC Educational Resources Information Center

Woodhouse, Howard

2012-01-01

In several of his works, Alfred North Whitehead (1861-1947) presents mathematics as a way of learning about general ideas that increase our understanding of the universe. The danger is that students get bogged down in its technical operations. He argues that mathematics should be an integral part of a new kind of liberal education, incorporating…

CTE Policy Past, Present, and Future: Driving Forces behind the Evolution of Federal Priorities

ERIC Educational Resources Information Center

Imperatore, Catherine; Hyslop, Alisha

2017-01-01

Federal legislation has driven and been receptive to the vision of a rigorous, relevant career and technical education (CTE) system integrated with academics and aligned across middle school, secondary school, and postsecondary education. This article uses a social policy analysis approach to trace the history of federal CTE policy throughout the…

Mapping an Emergent Field of "Computational Education Policy": Policy Rationalities, Prediction and Data in the Age of Artificial Intelligence

ERIC Educational Resources Information Center

Gulson, Kalervo N.; Webb, P. Taylor

2017-01-01

Contemporary education policy involves the integration of novel forms of data and the creation of new data platforms, in addition to the infusion of business principles into school governance networks, and intensification of socio-technical relations. In this paper, we examine how "computational rationality" may be understood as…

Cost-Benefit Analysis of a Bridge to Integrate the Management of Technical Information for Producing Technical Manuals and Training Courses

DTIC Science & Technology

2010-11-01

Philadelphia, and all Computer-Based Training (CBT) courses delivered by Navy eLearning (NeL), a part of the Naval Education and Training Command (NETC...concentrated exclu- sively on the benefit side—whether the Bridge would save money in producing future technical manuals and training courses. It...of $78.1 million in 10-year costs: a savings of $86.8 million in producing future HM&E manuals and NeL-delivered courses less $8.7 million in

Coordination and Integration of Military Education with National Career Education

DTIC Science & Technology

1975-02-19

categories of requirements: formal education, vocational/ technical training, previous experience, licens- ing or certification and union apprenticeship...skills are not in demand . In the example under discussion, an Army Correctional Specialist may decide to locate in an area that has no positions...journeyman’s status (this category is most often related to craft or trade union membership) Other; e.g. , physical or personality traits. 15 Sections

Evaluating the Development of Science Research Skills in Work-Integrated Learning through the Use of Workplace Science Tools

ERIC Educational Resources Information Center

McCurdy, Susan M.; Zegwaard, Karsten E.; Dalgety, Jacinta

2013-01-01

Concept understanding, the development of analytical skills and a research mind set are explored through the use of academic tools common in a tertiary science education and relevant work-integrated learning (WIL) experiences. The use and development of the tools; laboratory book, technical report, and literature review are examined by way of…

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

PubMed

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency training. Focus points for improvement of the D-UPS curriculum according to the participants include increased attention to logistics and integration of a spiral learning approach.

75 FR 38793 - Office of Postsecondary Education

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-06

... funds to improve and strengthen the institution's academic quality, institutional management and fiscal... other institutions. Invitational Priority 3. Develop academic programs to improve course completion... and college or career pathway programs that integrate basic academic instruction with technical or...

Using Form+Theme+Context (FTC) for Rebalancing 21st-Century Art Education

ERIC Educational Resources Information Center

Sandell, Renee

2009-01-01

This article addresses the need to rebalance 21st-century art education for inclusion and integration leading to fuller art engagement in an increasingly visual world. I expand upon the form versus content canon in art and offset the typically predominant use of sensory, formal, or technical qualities in comprehending meaning from, as well as in…

Integrating Higher Education Financial Aid and Financing Policy: Case Studies from the "Changing Direction" Technical Assistance States

ERIC Educational Resources Information Center

Bell, Julie Davis; Blanco, Cheryl D.; Conger, Sharmila Basu; Lingenfelter, Paul E.; Michelau, Demaree K.; Wright, David L.

2008-01-01

Throughout the end of the 1990s and the early years of the current decade, states experienced severe downturns in their economies. As has happened during other recessions, higher education, often viewed as discretionary spending compared to other budget demands, was hit particularly hard. During these years of severe fiscal constraints, however, a…

Electronic School Atlas as an Innovative Means of Development of Geographic Education in Kazakhstan Schools

ERIC Educational Resources Information Center

Damekova, Saule Kairollovna; Zharkinbekov, Temirkhan Niyazovich; Turtkarayeva, Gulnara Bayanovna; Han, Sergey Inokenteevich; Damekov, Oral Zhangabylovich

2016-01-01

Strategic role of geographic information systems (GIS) for the geographical entity is not in doubt, but there are differences in the understanding of what, when and how to teach. The article presents some aspects of the GIS integration in school education in Kazakhstan. An analysis of the scientific and technical literature, teaching practice…

The importance of comprehensive agricultural education in land-grant institutions: a historical perspective.

PubMed

Grant, P M; Field, T G; Green, R D; Rollin, B E

2000-06-01

Any thorough examination of the present and future of agricultural education must certainly begin with a look into its past. Since the creation of the United States, many leading American philosophers have viewed a strong agrarian culture as the bedrock of American vigor. These same philosophers repeatedly noted the significance of comprehensive agricultural education to a nation rich in agricultural wealth. The signing of the Agricultural Colleges Act legitimized the concept of formal education in the agricultural sciences and provided funding for such education. The Act, which came to be known as the Morrill Act, after one of its primary authors, stressed the importance of comprehensive education. In fact, the inclusion of liberal studies was specifically mentioned in the Morrill Act and was defended repeatedly by Morrill himself. Comprehensive education prevented graduating technically trained students who were lacking in the basic outcomes of education--critical, comprehensive problem solving, cohesive thought, and effective communication. However, throughout history, the demands of a growing population coupled with rapid advancements in scientific knowledge led to a gradual move away from comprehensive education in agricultural sciences toward increasing specialization, resulting in more narrowly trained students. Today's agricultural students are technically well versed but often lack the skill and knowledge required for cohesive thought and critical problem solving. Addressing the multitude of challenges facing leaders in the future of agriculture requires much more than technical skill. These challenges require quick, yet careful thinkers and communicators who can respond to changing market structure and consumer demand in a dynamic way. Students who are a product of a conscious move toward amalgamation of burgeoning scientific knowledge and technical prowess with an integrative education emphasizing relationships between disciplines would better serve tomorrow's agriculture.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 34: Linear Integrated Circuits. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on linear integrated circuits is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in…

Integration of Staff Development and Research: Description of the Staff Development Project in Progress for the School Year 1975-1976. Technical Report #62.

ERIC Educational Resources Information Center

Speidel, Gisela E.

This report from the Kamehameha Early Education Program (KEEP) describes the 1975-76 KEEP staff development program, which was designed to integrate staff development and research. Specific purposes of the program were: (1) to develop the abilities of the teaching staff in teaching, consultation, and research; (2) to conduct pilot research in…

How Change Occurred at the Stoughton Area School District: Lessons from a SWIFT (Schoolwide Integrated Framework for Transformation) Knowledge Development Site. Issue Brief #3

ERIC Educational Resources Information Center

Stonemeier, Jennifer; Trader, Barbara; Kingston, Mary; Richards, Curtis; Blank, Rolf; East, Bill

2014-01-01

The SWIFT Center (Schoolwide Integrated Framework for Transformation) is an initiative to bring about educational equity district by district until all students excel, including students with the most profound needs. As the national technical assistance center to build schoolwide inclusive practices to improve academic and behavioral outcomes for…

High-Fidelity Simulation for Neonatal Nursing Education: An Integrative Review of the Literature.

PubMed

Cooper, Allyson

2015-01-01

The lack of safe avenues to develop neonatal nursing competencies using human subjects leads to the notion that simulation education for neonatal nurses might be an ideal form of education. This integrative literature review compares traditional, teacher-centered education with high-fidelity simulation education for neonatal nurses. It examines the theoretical frameworks used in neonatal nursing education and outlines the advantages of this type of training, including improving communication and teamwork; providing an innovative pedagogical approach; and aiding in skill acquisition, confidence, and participant satisfaction. The importance of debriefing is also examined. High-fidelity simulation is not without disadvantages, including its significant cost, the time associated with training, the need for very complex technical equipment, and increased faculty resource requirements. Innovative uses of high-fidelity simulation in neonatal nursing education are suggested. High-fidelity simulation has great potential but requires additional research to fully prove its efficacy.

A "Fear" Studies Perspective and Critique: Analyzing English and Stengel's Progressive Study of Fear and Learning in "Education Theory." Technical Paper No. 37

ERIC Educational Resources Information Center

Fisher, R. Michael

2011-01-01

The author critiques the progressive approach of two contemporary educational philosophers (English and Stengel) on the topic of fear and learning. Using a postmodern integral approach, this article examines the tendency of reductionism, individualism, and psychologism as part of a hegemonic liberalism and modernism in discourses on fear and…

Pioneering Partnerships for Progress

ERIC Educational Resources Information Center

Borden, Sam

2006-01-01

This paper presents a brief description of the Center for Bioscience and the Integration of Computer and Telecommunications Technology (BioCATT) at Gateway Technical College in Kenosha, Wisconsin. BioCATT is designed to serve as a catalyst for innovation in educational programming, business services, and technology applications.

48 CFR 1352.215-75 - Evaluation criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... relative importance among the technical evaluation factors.] Based upon the results of the integrated... and manage the contract and the means that will be used to accomplish the contract requirements. The... non-performance. Factor 3—KEY PERSONNEL. The education, experience, and accomplishments of key...

48 CFR 1352.215-75 - Evaluation criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... relative importance among the technical evaluation factors.] Based upon the results of the integrated... and manage the contract and the means that will be used to accomplish the contract requirements. The... non-performance. Factor 3—KEY PERSONNEL. The education, experience, and accomplishments of key...

48 CFR 1352.215-75 - Evaluation criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... relative importance among the technical evaluation factors.] Based upon the results of the integrated... and manage the contract and the means that will be used to accomplish the contract requirements. The... non-performance. Factor 3—KEY PERSONNEL. The education, experience, and accomplishments of key...

Working with Disruptive Students

ERIC Educational Resources Information Center

Harrell, Ivan L., II; Hollins, Thomas N., Jr.

2009-01-01

The recent tragedies at Virginia Tech, Louisiana Technical College, and Northern Illinois University have sparked national dialogue regarding how the higher-education community may increase safety on campus while preserving the integrity of the learning environment. Much of the dialogue has focused on institutions addressing student mental-health…

Interactive Media and Simulation Tools for Technical Training

NASA Technical Reports Server (NTRS)

Gramoll, Kurt

1997-01-01

Over the last several years, integration of multiple media sources into a single information system has been rapidly developing. It has been found that when sound, graphics, text, animations, and simulations are skillfully integrated, the sum of the parts exceeds the individual parts for effective learning. In addition, simulations can be used to design and understand complex engineering processes. With the recent introduction of many high-level authoring, animation, modeling, and rendering programs for personal computers, significant multimedia programs can be developed by practicing engineers, scientists and even managers for both training and education. However, even with these new tools, a considerable amount of time is required to produce an interactive multimedia program. The development of both CD-ROM and Web-based programs are discussed in addition to the use of technically oriented animations. Also examined are various multimedia development tools and how they are used to develop effective engineering education courseware. Demonstrations of actual programs in engineering mechanics are shown.

Educating and training industrial ecologists for the 1990s.

PubMed

Troxell, D E

1992-02-01

For industrial ecology to become a reality and flourish, many talents must be integrated into a single system. Basically, there are four types of technologists who must be brought together to create a system: (i) technical specialists-those that can take the state of knowledge to the state of the art and eventually to the state of practice; (ii) technical "generalists"-those that can integrate diverse technologies into a comprehensive solution; (iii) technical managers-those that can lead technical efforts to an optimal solution (these people must have management skills in their area); and (iv) program managers-those that can understand and merge the overall efforts of technology, business, schedule, and finance. The initial questions for industrial ecology in the 1990s are: Do these people presently exist in industry? What will be needed to bring new people (recent graduates) into the field of industrial ecology? For this decade, the people who will develop and lead the concept of industrial ecology are presently in industry. However, certainly few, if any, today understand the concept of industrial ecology as a system issue. Training will be needed for these practitioners of the 1990s so that the overall goal and the mechanism for achieving industrial ecology are understood. A three-tiered approach is presented to define the education/training needed, to conduct training on an industry basis, and then to initiate the training to be done within a corporation. The three tiers propose the use of universities, professional societies, and industry groups. Having universities participate in the training of the 1990s industrial ecologists will give universities insight to the development of industrial ecology, and access to industry needs so that curriculum can be initiated to educate the industrial ecologists of the future.

Engaging the Geodetic and Geoscience Communities in EarthScope Education and Outreach

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Berg, M.; Morris, A. R.; Olds, S. E.

2013-12-01

UNAVCO is NSF's geodetic facility and operates as a university-governed consortium dedicated to facilitating geoscience research and education, including the support of EarthScope. The Education and Community Engagement program at UNAVCO provides support for broader impacts both externally to the broader University and EarthScope community as well as internally to the UNAVCO. During the first 10 years of EarthScope UNAVCO has engaged in outreach and education activities across the EarthScope footprint ranging from outreach to formal and informal educators and interpreters, to technical training for university faculty and researchers. UNAVCO works jointly with the EarthScope National Office and IRIS while simultaneously maintaining and developing an independent engagement and education program. UNAVCO provides training in the form of technical short courses to researchers including graduate students and early-career professionals, and conducts educational workshops for K-12 educators. A suite of educational materials focused on the integration of EarthScope data into curriculum materials is available from UNAVCO and will soon expand the undergraduate offerings to include a broader suite of geodesy applications activities for undergraduate students. UNAVCO provides outreach materials and in support of EarthScope including summaries of research project and campaign highlights, science snapshots featuring summaries of scientific advancements made possible by UNAVCO services and non-technical communications via social media. UNAVCO also provides undergraduate students exposure to EarthScope science research participation in a year-long research internship managed by UNAVCO (Research Experiences in Solid Earth Science for Students - RESESS).

Making geoscience education accessible for students who are blind and visually impaired

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Berg, M.; Morris, A. R.; Olds, S. E.

2011-12-01

UNAVCO is NSF's geodetic facility and operates as a university-governed consortium dedicated to facilitating geoscience research and education, including the support of EarthScope. The Education and Community Engagement program at UNAVCO provides support for broader impacts both externally to the broader University and EarthScope community as well as internally to the UNAVCO. During the first 10 years of EarthScope UNAVCO has engaged in outreach and education activities across the EarthScope footprint ranging from outreach to formal and informal educators and interpreters, to technical training for university faculty and researchers. UNAVCO works jointly with the EarthScope National Office and IRIS while simultaneously maintaining and developing an independent engagement and education program. UNAVCO provides training in the form of technical short courses to researchers including graduate students and early-career professionals, and conducts educational workshops for K-12 educators. A suite of educational materials focused on the integration of EarthScope data into curriculum materials is available from UNAVCO and will soon expand the undergraduate offerings to include a broader suite of geodesy applications activities for undergraduate students. UNAVCO provides outreach materials and in support of EarthScope including summaries of research project and campaign highlights, science snapshots featuring summaries of scientific advancements made possible by UNAVCO services and non-technical communications via social media. UNAVCO also provides undergraduate students exposure to EarthScope science research participation in a year-long research internship managed by UNAVCO (Research Experiences in Solid Earth Science for Students - RESESS).

Beyond knowledge and skills: the use of a Delphi study to develop a technology-mediated teaching strategy.

PubMed

Rowe, Michael; Frantz, Jose; Bozalek, Vivienne

2013-04-10

While there is evidence to suggest that teaching practices in clinical education should include activities that more accurately reflect the real world, many educators base their teaching on transmission models that encourage the rote learning of knowledge and technical skills. Technology-mediated instruction may facilitate the development of professional attributes that go beyond "having" knowledge and skills, but there is limited evidence for how to integrate technology into these innovative teaching approaches. This study used a modified Delphi method to help identify the professional attributes of capable practitioners, the approaches to teaching that may facilitate the development of these attributes, and finally, how technology could be integrated with those teaching strategies in order to develop capable practitioners. Open-ended questions were used to gather data from three different expert panels, and results were thematically analysed. Clinical educators should not view knowledge, skills and attitudes as a set of products of learning, but rather as a set of attributes that are developed during a learning process. Participants highlighted the importance of continuing personal and professional development that emphasised the role of values and emotional response to the clinical context. To develop these attributes, clinical educators should use teaching activities that are learner-centred, interactive, integrated, reflective and that promote engagement. When technology-mediated teaching activities are considered, they should promote the discussion of clinical encounters, facilitate the sharing of resources and experiences, encourage reflection on the learning process and be used to access content outside the classroom. In addition, educational outcomes must drive the integration of technology into teaching practice, rather than the features of the technology. There is a need for a cultural change in clinical education, in which those involved with the professional training of healthcare professionals perceive teaching as more than the transmission of knowledge and technical skills. Process-oriented teaching practices that integrate technology as part of a carefully designed curriculum may have the potential to facilitate the development of capable healthcare graduates who are able to navigate the complexity of health systems and patient management in ways that go beyond the application of knowledge and skills.

Beyond knowledge and skills: the use of a Delphi study to develop a technology-mediated teaching strategy

PubMed Central

2013-01-01

Background While there is evidence to suggest that teaching practices in clinical education should include activities that more accurately reflect the real world, many educators base their teaching on transmission models that encourage the rote learning of knowledge and technical skills. Technology-mediated instruction may facilitate the development of professional attributes that go beyond “having” knowledge and skills, but there is limited evidence for how to integrate technology into these innovative teaching approaches. Methods This study used a modified Delphi method to help identify the professional attributes of capable practitioners, the approaches to teaching that may facilitate the development of these attributes, and finally, how technology could be integrated with those teaching strategies in order to develop capable practitioners. Open-ended questions were used to gather data from three different expert panels, and results were thematically analysed. Results Clinical educators should not view knowledge, skills and attitudes as a set of products of learning, but rather as a set of attributes that are developed during a learning process. Participants highlighted the importance of continuing personal and professional development that emphasised the role of values and emotional response to the clinical context. To develop these attributes, clinical educators should use teaching activities that are learner-centred, interactive, integrated, reflective and that promote engagement. When technology-mediated teaching activities are considered, they should promote the discussion of clinical encounters, facilitate the sharing of resources and experiences, encourage reflection on the learning process and be used to access content outside the classroom. In addition, educational outcomes must drive the integration of technology into teaching practice, rather than the features of the technology. Conclusions There is a need for a cultural change in clinical education, in which those involved with the professional training of healthcare professionals perceive teaching as more than the transmission of knowledge and technical skills. Process-oriented teaching practices that integrate technology as part of a carefully designed curriculum may have the potential to facilitate the development of capable healthcare graduates who are able to navigate the complexity of health systems and patient management in ways that go beyond the application of knowledge and skills. PMID:23574731

34 CFR 400.2 - What programs are governed by these regulations?

Code of Federal Regulations, 2013 CFR

2013-07-01

...). (8) National Network for Curriculum Coordination in Vocational and Technical Education (34 CFR part... Projects for the Integration of Vocational and Academic Learning Program (34 CFR part 425). (21) Cooperative Demonstration Programs (34 CFR part 426). (22) Bilingual Vocational Training Program (34 CFR part...

34 CFR 400.2 - What programs are governed by these regulations?

Code of Federal Regulations, 2014 CFR

2014-07-01

...). (8) National Network for Curriculum Coordination in Vocational and Technical Education (34 CFR part... Projects for the Integration of Vocational and Academic Learning Program (34 CFR part 425). (21) Cooperative Demonstration Programs (34 CFR part 426). (22) Bilingual Vocational Training Program (34 CFR part...

34 CFR 400.2 - What programs are governed by these regulations?

Code of Federal Regulations, 2012 CFR

2012-07-01

...). (8) National Network for Curriculum Coordination in Vocational and Technical Education (34 CFR part... Projects for the Integration of Vocational and Academic Learning Program (34 CFR part 425). (21) Cooperative Demonstration Programs (34 CFR part 426). (22) Bilingual Vocational Training Program (34 CFR part...

IPM for Pennsylvania Schools: A How-To Manual.

ERIC Educational Resources Information Center

Martz, Eston, Ed.

This manual presents practical advice on planning and adopting an integrated pest management (IPM) program for Pennsylvania educational facilities. The manual covers how to implement a school IPM, school IPM operational information for the school administrator, and technical information for Pennsylvania schools concerning various pests found in…

Internationalizing the Curriculum: A Case Study in the Business Division.

ERIC Educational Resources Information Center

Warzyn, Dee

Internationalizing the business curriculum means integrating the processes of international culture into an educational setting to give students a more comprehensive understanding of the business world. As part of its efforts to internationalize the curriculum, Wisconsin's Waukesha County Technical College established an Associate degree in…

Knowledge Management: A Tripartite Conceptual Framework for Career and Technical Teacher Educators

ERIC Educational Resources Information Center

Lee, Hae-Young; Roth, Gene L.

2008-01-01

Researchers and practitioners consider knowledge management to be a strategic intervention that integrates organizational resources such as technologies and human resources. This conceptual paper focuses on the foundational contributions of economics, sociology, and psychology to knowledge management. Select theories from each foundational area…

Advances in health informatics education: educating students at the intersection of health care and information technology.

PubMed

Kushniruk, Andre; Borycki, Elizabeth; Armstrong, Brian; Kuo, Mu-Hsing

2012-01-01

The paper describes the authors' work in the area of health informatics (HI) education involving emerging health information technologies. A range of information technologies promise to modernize health care. Foremost among these are electronic health records (EHRs), which are expected to significantly improve and streamline health care practice. Major national and international efforts are currently underway to increase EHR adoption. However, there have been numerous issues affecting the widespread use of such information technology, ranging from a complex array of technical problems to social issues. This paper describes work in the integration of information technologies directly into the education and training of HI students at both the undergraduate and graduate level. This has included work in (a) the development of Web-based computer tools and platforms to allow students to have hands-on access to the latest technologies and (b) development of interdisciplinary educational models that can be used to guide integrating information technologies into HI education. The paper describes approaches that allow for remote hands-on access by HI students to a range of EHRs and related technology. To date, this work has been applied in HI education in a variety of ways. Several approaches for integration of this essential technology into HI education and training are discussed, along with future directions for the integration of EHR technology into improving and informing the education of future health and HI professionals.

Integrating ethics in design through the value-sensitive design approach.

PubMed

Cummings, Mary L

2006-10-01

The Accreditation Board of Engineering and Technology (ABET) has declared that to achieve accredited status, 'engineering programs must demonstrate that their graduates have an understanding of professional and ethical responsibility.' Many engineering professors struggle to integrate this required ethics instruction in technical classes and projects because of the lack of a formalized ethics-in-design approach. However, one methodology developed in human-computer interaction research, the Value-Sensitive Design approach, can serve as an engineering education tool which bridges the gap between design and ethics for many engineering disciplines. The three major components of Value-Sensitive Design, conceptual, technical, and empirical, exemplified through a case study which focuses on the development of a command and control supervisory interface for a military cruise missile.

Professional technical standards in colleges and schools of pharmacy.

PubMed

Berry, Tricia M; Chichester, Clinton O; Lundquist, Lisa M; Sanoski, Cynthia A; Woodward, Donald A; Worley, Marcia M; Early, Johnnie L

2011-04-11

To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study.

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

Overview of NASA's Propulsion 21 Effort

NASA Technical Reports Server (NTRS)

Long-Davis, Mary Jo

2006-01-01

Propulsion 21 technologies contribute to reducing CO2 and NO(x) emissions and noise. Integrated Government/Industry/University research efforts have produced promising initial technical results. Graduate students from 5 partnering universities will benefit from this collaborative research--> educating the future engineering workforce. Phase 2 Efforts scheduled to be completed 3QFY06.

Integration of Computers into an EFL Reading Classroom

ERIC Educational Resources Information Center

Lim, Kang-Mi; Shen, Hui Zhong

2006-01-01

This study examined the impact of Computer Assisted Language Learning (CALL) on Korean TAFE (Technical and Further Education) college students in an English as a Foreign Language (EFL) reading classroom in terms of their perceptions of learning environment and their reading performance. The study compared CALL and traditional reading classes over…

Changing Approaches--Changing Perspectives

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Sawyer, Jennifer

2011-01-01

Over the past seven years, research teams from the National Research Center for Career and Technical Education (NRCCTE) have been at work testing curriculum integration models. Each of three studies--Math-in-CTE, Authentic Literacy-in-CTE, and Science-in-CTE--has focused on the development of pedagogic frameworks and delivery of professional…

Making Connections: Integrating Computer Applications with the Academic Core

ERIC Educational Resources Information Center

Harter, Christi

2011-01-01

In order to improve the quality of technology instruction, the Career and Technical Education (CTE) Business Department in the Spokane Public School district has aligned its Computer Applications (CA) course to the district's ninth-grade Springboard (Language Arts) curriculum, Algebra I curriculum, and the Culminating Project (senior project)…

Introductory Programming Subject in European Higher Education

ERIC Educational Resources Information Center

Aleksic, Veljko; Ivanovic, Mirjana

2016-01-01

Programming is one of the basic subjects in most informatics, computer science mathematics and technical faculties' curricula. Integrated overview of the models for teaching programming, problems in teaching and suggested solutions were presented in this paper. Research covered current state of 1019 programming subjects in 715 study programmes at…

The Learning Fund: Income Generation through NFE. Technical Note No. 22.

ERIC Educational Resources Information Center

Iskander, Anwas; And Others

The Learning Fund Program sponsored by PENMAS, the Indonesian Directorate of Community Education, successfully uses community-based learning activities to promote entrepreneurship and managerial skills among Indonesia's rural poor. Currently, the program integrates the learning, financial, and equipment resources necessary to help over 5,400 small…

Lessons Learned from Accelerating Opportunity. Lessons Learned Series

ERIC Educational Resources Information Center

Wilson, Randall

2015-01-01

The Accelerating Opportunity initiative helps our nation's lowest-skilled adults earn college credentials and enter higher-wage jobs faster by combining the Adult Basic Education and career and technical training they need into one integrated curriculum. Based on four years of designing and managing Accelerating Opportunity, Jobs for the Future…

Mainstreaming Handicapped Preschoolers. Proceedings of a Topical Workshop. TADscripts '82.

ERIC Educational Resources Information Center

Anderson, Joan; Black, Talbot

The document offers proceedings from a Technical Assistance Development System (TADS) topical workshop designed to explore the implications of mainstreaming for early childhood education. The first section contains an adaptation of the keynote address by A. Turnbull titled "Integration of Handicapped Children in Home, School, and…

Parametric Pedagogy: Integrating Parametric CAD in Irish Post-Primary Schools

ERIC Educational Resources Information Center

McGarr, Oliver; Seery, Niall

2011-01-01

Technology education in Irish post-primary schools is undergoing significant change. In recent years the syllabi of all technology-related subjects have been revised. A new subject, Design and Communication Graphics, has replaced the traditional Technical Drawing subject. This new subject aims to develop students' spatial awareness and graphical…

Educating for action: Aligning skills with policies for sustainable development in the Danube river basin.

PubMed

Irvine, Kenneth; Weigelhofer, Gabriele; Popescu, Ioana; Pfeiffer, Ellen; Păun, Andrei; Drobot, Radu; Gettel, Gretchen; Staska, Bernadette; Stanica, Adrian; Hein, Thomas; Habersack, Helmut

2016-02-01

Sustainable river basin management depends on knowledge, skills and education. The DANCERS project set out to identify feasible options for achieving education for sustainable water management across the Danube river basin, and its integration with broader education and economic development. The study traced the historic, regulatory and educational landscape of water management in the basin, contrasting it with the complex political decision-making, data-heavy decision support, learning-centred collaboration, and information-based participation that are all inherent components of Integrated Water Resource Management (IWRM). While there is a wide range of educational opportunities and mobility schemes available to individuals, there is no coherent network related to training in water management and sustainable development in the study region. Progress in addressing the multi-layered environmental challenges within the basin requires further aligning of economic, environmental and educational policies, advancing the EU Bologna Process across the region, and the development of dedicated training programmes that combine technical and relational skills. The DANCERS project identified key short and medium term needs for education and research to support progressive adoption of sustainable development, and the necessary dialogue across the public and private sectors to align policies. These include the development of new education networks for masters and PhD programmes, including joint programmes; improved access to technical training and life-long learning programmes for skills development; developing formalized and certified competency structures and associated accreditation of institutions where such skilled individuals work; and developing a co-ordinated research infrastructure and pan-basin programme for research for water management and sustainable development. Copyright © 2015 Elsevier B.V. All rights reserved.

Integration of simulation in postgraduate studies in Saudi Arabia: The current practice in anesthesia training program

PubMed Central

Arab, Abeer; Alatassi, Abdulaleem; Alattas, Elias; Alzoraigi, Usamah; AlZaher, Zaki; Ahmad, Abdulaziz; Albabtain, Hesham; Boker, Abdulaziz

2017-01-01

The educational programs in the Saudi Commission for Health Specialties are developing rapidly in the fields of technical development. Such development is witnessed, particularly in the scientific areas related to what is commonly known as evidence-based medicine. This review highlights the critical need and importance of integrating simulation into anesthesia training and assessment. Furthermore, it describes the current utilization of simulation in anesthesia and critical care assessment process. PMID:28442961

Integrative Medicine in Preventive Medicine Education

PubMed Central

Jani, Asim A.; Trask, Jennifer; Ali, Ather

2016-01-01

During 2012, the USDHHS’s Health Resources and Services Administration funded 12 accredited preventive medicine residencies to incorporate an evidence-based integrative medicine curriculum into their training programs. It also funded a national coordinating center at the American College of Preventive Medicine, known as the Integrative Medicine in Preventive Medicine Education (IMPriME) Center, to provide technical assistance to the 12 grantees. To help with this task, the IMPriME Center established a multidisciplinary steering committee, versed in integrative medicine, whose primary aim was to develop integrative medicine core competencies for incorporation into preventive medicine graduate medical education training. The competency development process was informed by central integrative medicine definitions and principles, preventive medicine’s dual role in clinical and population-based prevention, and the burgeoning evidence base of integrative medicine. The steering committee considered an interdisciplinary integrative medicine contextual framework guided by several themes related to workforce development and population health. A list of nine competencies, mapped to the six general domains of competence approved by the Accreditation Council of Graduate Medical Education, was operationalized through an iterative exercise with the 12 grantees in a process that included mapping each site’s competency and curriculum products to the core competencies. The competencies, along with central curricular components informed by grantees’ work presented elsewhere in this supplement, are outlined as a roadmap for residency programs aiming to incorporate integrative medicine content into their curricula. This set of competencies adds to the larger efforts of the IMPriME initiative to facilitate and enhance further curriculum development and implementation by not only the current grantees but other stakeholders in graduate medical education around integrative medicine training. PMID:26477897

Integrating Nanotechnology into School Education: A Review of the Literature

ERIC Educational Resources Information Center

Ghattas, Nadira I.; Carver, Jeffrey S.

2012-01-01

Background: In this era of rapid technical advancement, there are growing debates around the idea of nanotechnology, which are both timely and controversial. Nanotechnology materials are being utilized in our daily lives in many ways, often without consumer knowledge. Due to the explosion of nanotechnology applications, there is a necessity to…

Learning and Serving through CTE

ERIC Educational Resources Information Center

Reese, Susan

2010-01-01

Across the country, career and technical (CTE) students are learning skills that will help them make a living, while also learning the meaning of giving that will help them, as Churchill put it, "make a life." Service-learning is an integral component of American education that goes on every day in CTE classes and career and technical…

Possibilities and Limitations of Integrating Peer Instruction into Technical Creativity Education

ERIC Educational Resources Information Center

Wang, Shijuan; Murota, Masao

2016-01-01

The effects of active peer-peer interaction on the generation of new hypotheses or models and the increase of new solutions have attracted widespread attention. Therefore, the peer discussion portion of peer instruction is supposedly effective in developing students' creativity. However, few empirical research involves how to adapt peer…

Inclusive E-Learning - Towards an Integrated System Design.

PubMed

Patzer, Yasmin; Pinkwart, Niels

2017-01-01

At first sight there seem to be issues combining technical accessibility guidelines and educational needs when designing inclusive E-Learning. Furthermore Universal Design for Learning seems to contradict individualization. In this paper we address both issues with an inclusive E-Learning design for the LAYA system, which targets disabled and non-disabled learners.

Introduction of ICT and Multimedia into Cambodia's Teacher Training Centres

ERIC Educational Resources Information Center

Dionys, David

2012-01-01

This article describes the integration of ICT in the teacher training centres of Cambodia. It focuses on the collaboration between the Teacher Training Department of the Ministry of Education, Youth and Sports (MoEYS) of Cambodia and VVOB (Flemish Association for Development Cooperation and Technical Assistance), which is aimed at improving ICT…

Integrating Existing Material Into Educational Television Programming. Satellite Technology Demonstration, Technical Report No. 0502.

ERIC Educational Resources Information Center

Beard, Karen L.; Lonsdale, Helen C.

The Satellite Technology Demonstration (STD) produced a series of 81 television programs called the "J-series" for junior high school students. This material was used to illustrate real life situations for a career development program. Because materials were expensive, the decision was made to produce "in-house" programs and…

Multi-Level Adaptation in End-User Development of 3D Virtual Chemistry Experiments

ERIC Educational Resources Information Center

Liu, Chang; Zhong, Ying

2014-01-01

Multi-level adaptation in end-user development (EUD) is an effective way to enable non-technical end users such as educators to gradually introduce more functionality with increasing complexity to 3D virtual learning environments developed by themselves using EUD approaches. Parameterization, integration, and extension are three levels of…

Capstone Experiences in Career and Technical Education. Practice Application Brief No. 16.

ERIC Educational Resources Information Center

Kerka, Sandra

Capstones are culminating experiences in which students synthesize subject-matter knowledge they have acquired, integrate cross-disciplinary knowledge, and connect theory and application in preparation for entry into a career. Capstone courses should be both a synthesis and a bridge to students' future after graduation. In career and technical…

Prospects and Challenges for Using Microcomputers in School. Technical Report No. 7.

ERIC Educational Resources Information Center

Pea, Roy D.

Prepared as an address for educator groups, this paper provides a theoretical perspective for thinking about problems and prospects for integrating microcomputer uses in school activities. Six major aspects of the perspective are defined: (1) the computer as general-purpose symbolic device; (2) the importance of developmental studies of children's…

Evaluation, Integration and Institutionalization of Initiatives to Enhance STEM Student Success

ERIC Educational Resources Information Center

Dickson, Lisa; Mandell, Marv; Maton, Kenneth; Marcotte, Dave; Rous, Philip; McDermott, Patrice; Rutledge, Janet; LaCourse, William R.; Sutphin, Kathy Lee

2013-01-01

Many researchers, policymakers, and university administrators have called for more students to major in Science, Technology, Engineering and Mathematics (STEM) fields to address the critical need for a diverse and technically skilled workforce that is prepared to address national problems and educate its future STEM leaders. One of the questions…

SUMMER PROGRAM FOR UPDATING THE TECHNICAL COMPETENCY OF TEACHERS OF INDUSTRIAL SUBJECTS. FINAL REPORT.

ERIC Educational Resources Information Center

BOHN, RALPH C.

STUDENTS OF THE INSERVICE PROGRAM WERE 96 INDUSTRIAL EDUCATION TEACHERS FROM THE AREAS OF AUTO AND POWER, DRAFTING, ELECTRONICS, AND METALS WHO WERE SELECTED FROM 576 APPLICANTS. OBJECTIVES WERE TO (1) DEVELOP MODELS FOR INDUSTRY-SCHOOL COOPERATIVE PROGRAMS, (2) INTEGRATE INSTRUCTION ON INDUSTRIAL MATERIALS, CYBERNETICS, AND AUTOMATION INTO THE…

78 FR 60864 - Agency Information Collection Activities; Submission to the Office of Management and Budget for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Integrated Postsecondary Education Data System (IPEDS) is a web-based data collection system designed to..., average net price, student financial aid, graduation rates, revenues and expenditures, faculty salaries... Survey between the Technical Review Panel meeting and the submission of the clearance package, and (2) a...

Efficiency in the Community College Sector: Stochastic Frontier Analysis

ERIC Educational Resources Information Center

Agasisti, Tommaso; Belfield, Clive

2017-01-01

This paper estimates technical efficiency scores across the community college sector in the United States. Using stochastic frontier analysis and data from the Integrated Postsecondary Education Data System for 2003-2010, we estimate efficiency scores for 950 community colleges and perform a series of sensitivity tests to check for robustness. We…

Educating the humanitarian engineer.

PubMed

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Rethinking knowledge and pedagogy in dental education.

PubMed

Whipp, J L; Ferguson, D J; Wells, L M; Iacopino, A M

2000-12-01

Dentistry as a profession has often been considered both art and science. Traditional dental education has attempted to address both; however, in many places only the science of dentistry is emphasized. The move toward competency-based curricula in dental education requires an expansion of what constitutes meaningful knowledge in the curriculum and what pedagogies best support that curriculum. The scientific and technical knowledge considered foundational to clinical practice is not sufficient to teach competencies associated with the art of dentistry. Habermas, a social scientist, offers a way of looking beyond technical knowledge to consider two other forms of knowledge: practical and emancipatory. Pedagogy that supports development of practical and emancipatory knowledge includes problem-based learning and case methods, heuristics, reflective practica, journals, storytelling, and performance-based assessment methods. These important teaching strategies are being integrated into various dental curricula including a new competency-based dental curriculum at Marquette University's School of Dentistry. It will be critical for dental educators to continue developing these methods to provide efficient and effective education for future practitioners in both the art and science of dentistry.

Integrating team training strategies into obstetrical emergency simulation training.

PubMed

Daniel, Linda T; Simpson, Ellen K

2009-01-01

Successful management of obstetrical emergencies such as shoulder dystocia requires the coordinated efforts of a multidisciplinary team of professionals. Simulation education provides an opportunity to learn and master simple as well as complex technical skills needed in emergent situations. Team training has been shown to improve the quality of communication among team members and consequently has an enormous impact on human performance. In the healthcare environment, especially obstetrics where the stakes are high, integrating team training into simulation education can advance efforts to create and sustain a culture of safety. With over 7,100 deliveries annually, our 1,100-bed, two-hospital regional healthcare system embarked on this journey to advance the culture of safety.

Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

Expanding the frontiers of national qualifications frameworks through lifelong learning

NASA Astrophysics Data System (ADS)

Owusu-Agyeman, Yaw

2017-10-01

The adoption of a national qualifications framework (NQF) by some governments in all world regions has shown some success in the area of formal learning. However, while NQFs continue to enhance formal learning in many countries, the same cannot be said for the recognition, validation and accreditation (RVA) of non-formal and informal learning. Focusing on competency-based technical and vocational education and training (TVET) within its NQF, Ghana introduced the National Technical and Vocational Education and Training Qualifications Framework (NTVETQF) as a sub-framework in 2012. In the wake of the NTVETQF's limited success, the author of this article reasons that a lifelong learning approach could enhance its effectiveness considerably. Comparing national and international policies, he argues that the NTVETQF should be able to properly address the issues of progression from informal and non-formal to formal modes of lifelong learning within the country's broad context of education. In addition, the study conceptualises the integration of lifelong learning within a broad NQF in four key domains: (1) individual; (2) institutional; (3) industry; and (4) state. The author concludes that, for the NTVETQF to achieve its goal of facilitating access to further education and training while also promoting lifelong learning for all (including workers in the informal economy), effective integration of all modes of lifelong learning is required. Although this entails some challenges, such as recognition of prior learning and validation of all modes of learning, it will help to widen access to education as well as providing individuals with a pathway for achieving their educational aspirations.

75 FR 29732 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-27

... DEPARTMENT OF EDUCATION Career and Technical Education Program--Promoting Rigorous Career and Technical Education Programs of Study Catalog of Federal Domestic Assistance (CFDA) Number: 84.051C. AGENCY: Office of Vocational and Adult Education, Department of Education. ACTION: Notice of proposed priorities...

Developing technical expertise in emergency medicine--the role of simulation in procedural skill acquisition.

PubMed

Wang, Ernest E; Quinones, Joshua; Fitch, Michael T; Dooley-Hash, Suzanne; Griswold-Theodorson, Sharon; Medzon, Ron; Korley, Frederick; Laack, Torrey; Robinett, Adam; Clay, Lamont

2008-11-01

Developing technical expertise in medical procedures is an integral component of emergency medicine (EM) practice and training. This article is the work of an expert panel composed of members from the Society for Academic Emergency Medicine (SAEM) Interest Group, the SAEM Technology in Medical Education Committee, and opinions derived from the May 2008 Academic Emergency Medicine Consensus Conference, "The Science of Simulation in Healthcare." The writing group reviewed the simulation literature on procedures germane to EM training, virtual reality training, and instructional learning theory as it pertains to skill acquisition and procedural skills decay. The authors discuss the role of simulation in teaching technical expertise, identify training conditions that lead to effective learning, and provide recommendations for future foci of research.

The Successful Teacher in Technical Education: The Preparation of the Successful Teacher.

ERIC Educational Resources Information Center

Storm, George

The purposes of this study were to identify success factors in technical education teaching and to obtain subject matter recommendations for the improvement of technical teacher education. A national population of technical education directors offering post-secondary technical education programs in 1963 under Title III of the National Defense…

Constructing the integral concept on the basis of the idea of accumulation: suggestion for a high school curriculum

NASA Astrophysics Data System (ADS)

Kouropatov, Anatoli; Dreyfus, Tommy

2013-07-01

Students have a tendency to see integral calculus as a series of procedures with associated algorithms and many do not develop a conceptual grasp giving them the desirable versatility of thought. Thus, instead of a proceptual view of the symbols in integration, they have, at best, a process-oriented view. On the other hand, it is not surprising that many students find concepts such as the integral difficult when they are unable to experience these processes directly in the classroom. With a view towards improving this situation, constructing the integral concept on the basis of the idea of accumulation has been proposed (Educ Stud Math. 1994;26:229-274; Integral as accumulation: a didactical perspective for school mathematics; Thessaloniki: PME; 2009. p. 417-424). In this paper, we discuss a curriculum that is based on this idea and a design for curriculum materials that are intended to develop an improved cognitive base for a flexible proceptual understanding of the integral and integration in high school. The main focus is on how we (mathematics teachers and mathematics educators) might teach the integral concept in order to help high school students to construct meaningful knowledge alongside acquiring technical abilities.

The Brazilian school feeding programme: an example of an integrated programme in support of food and nutrition security.

PubMed

Sidaner, Emilie; Balaban, Daniel; Burlandy, Luciene

2013-06-01

The present paper analyses the advances and challenges of the school feeding programme in Brazil (PNAE), as part of the Brazilian experience building up an integrated food and nutrition security national system. It explores the role of policy and regulatory frameworks in constructing quality service delivery and intersectoral integration. Review of PNAE and federal government technical documents and studies, legislation, minutes of meetings and official documents of the National Council of Food and Nutrition Security from 2003 to 2011. Food insecurity has decreased significantly in Brazil in the last decade, indicating that appropriate choices were made in terms of public policies and institutional arrangements, which other countries can learn from. Brazil food and nutrition security system; school feeding; school food. Brazil's integrated food and nutrition security policy approach promoted intersectorality in the food system, articulating actions to guarantee access to healthy food and to strengthen family farming. The quality of school meals has progressively improved; in particular, the availability of fruits and vegetables increased. However, national standards regarding menu composition have not yet been met. Regulations were an important factor, along with the policy approach linking food production, nutrition, health and education. Challenges are related to conflict of interests and to farmers' insufficient capacity to meet supply requirements and comply with technical procedures. Local food production, school meals and nutrition education can be linked through integrated programmes and policies, improving access to healthier foods. Government leadership, strong legislation, civil society participation and intersectoral decision making are determinant.

Best Practices in Supporting Persistence of Distant Education Students through Integrated Web-Based Systems

ERIC Educational Resources Information Center

McCracken, Holly

2009-01-01

The importance of the interconnectedness of academic, student, and technical support processes intrinsic to the provision of on-line instruction has been frequently depicted as a "service Web," with students at the center of the infrastructure. However, as programming to support distance learning continues to develop, such service Webs have grown…

Learning the Job: Juggling the Messages in On- and Off-the-Job Training.

ERIC Educational Resources Information Center

Harris, Roger; Willis, Peter; Simons, Michele

This report is an interpretative examination of on- and off-job sites as learning environments. It explores meanings that apprentices, workplace mentors, and technical and further education (TAFE) teachers develop and place on integrated training. Key insights from research on 32 apprentices, 21 host employers, and 6 TAFE teachers in South…

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (86th, Kansas City, Missouri, July 30-August 2, 2003). Public Relations Division.

ERIC Educational Resources Information Center

2003

The Public Relations Division of the proceedings contains the following 20 papers: "Communicating for Technical Change: Business-to-Business Communication with Small Manufacturing Firms" (Danielle Pontiff); "Integrating Editorial Presentation and Public Relations Publications: New Frontiers for Convergence and Collaborative…

Adaptation resources for agriculture: Responding to climate variability and change in the midwest and northeast

Treesearch

Maria K. Janowiak; Daniel D. Dostie; Michael A. Wilson; Michael J. Kucera; R. Howard Skinner; Jerry L. Hatfield; David Hollinger; Christopher W. Swanston

2016-01-01

Changes in climate and extreme weather are already increasing challenges for agriculture nationally and globally, and many of these impacts will continue into the future. This technical bulletin contains information and resources designed to help agricultural producers, service providers, and educators in the Midwest and Northeast regions of the United States integrate...

Literacy and Numeracy among Job Corps Students: Opportunities for Targeted Academic Infusion in CTE

ERIC Educational Resources Information Center

Mellard, Daryl F.; Woods, Kari L.; Desa, Deana Md.

2012-01-01

High literacy and numeracy demands in career and technical education (CTE) compared to low skill levels among many students prompted calls for academic infusion into training curricula. Research on CTE academic curriculum integration implicitly assumes that students' reading and math skills are like those described by models of typical academic…

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2005-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education (CTE) over the past 10 years. Data were collected across 10 CTE program areas from a nationally representative sample of community colleges. The authors discuss the extent to…

Work in the Navy--A Description of Navy Officer and Enlisted Occupations. Technical Report No. 923.

ERIC Educational Resources Information Center

McDermott, Michael N.; And Others

The manual contains career guidance materials describing occupations and career development opportunities in the Navy. The materials were developed for integration into the Oregon Career Information System, a career education program utilizing both computerized and manual information systems. The report includes a discussion of the general work of…

Attitudes of Early Adolescents toward Science, Women in Science, and Science Careers.

ERIC Educational Resources Information Center

Erb, Thomas Owen

The study described is part of a larger project, Career Oriented Modules to Explore Topics in Science (COMETS), designed to integrate career education into the science curriculum. This study aimed to determine the attitudes of male and female students aged 10-16 toward scientists, science, women in science, careers in technical fields, and careers…

Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort: Wave 1 (2009)--Frequency Tables. Technical Report 70

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. Since 2003, the LSAY program has been integrated with the Programme for International Student Assessment (PISA) conducted by the Organisation for Economic…

PROJECT PATS: "Potentially Academically Talented Students." Final Technical Report, 10/1/80-6/30/82.

ERIC Educational Resources Information Center

Pfeffer, J. S.; And Others

The final report describes a 2-year pilot project to identify and program for disadvantaged potentially gifted students in grades 5-8. Two goals of the program are stated: (1) to establish a working partnership among public and nonpublic schools and higher education; and (2) to integrate disadvantaged potentially gifted with nondisadvantaged…

Relational Study of Technical Education in Scotland and Nigeria for Sustainable Skill Development

ERIC Educational Resources Information Center

Umunadi, E. Kennedy

2014-01-01

This paper was designed to look at technical education curriculum and mode of implementation in Scotland in order to adopt the advantageous attributes of the Scottish technical education in Nigeria. The paper x-rayed the staff perceptions of technical education and its roles in Scotland; history of technical education before the advent of British…

The Maker Movement, the Promise of Higher Education, and the Future of Work

NASA Astrophysics Data System (ADS)

Wigner, Aubrey

The 21st century will be the site of numerous changes in education systems in response to a rapidly evolving technological environment where existing skill sets and career structures may cease to exist or, at the very least, change dramatically. Likewise, the nature of work will also change to become more automated and more technologically intensive across all sectors, from food service to scientific research. Simply having technical expertise or the ability to process and retain facts will in no way guarantee success in higher education or a satisfying career. Instead, the future will value those educated in a way that encourages collaboration with technology, critical thinking, creativity, clear communication skills, and strong lifelong learning strategies. These changes pose a challenge for higher education's promise of employability and success post-graduation. Addressing how to prepare students for a technologically uncertain future is challenging. One possible model for education to prepare students for the future of work can be found within the Maker Movement. However, it is not fully understood what parts of this movement are most meaningful to implement in education more broadly, and higher education in particular. Through the qualitative analysis of nearly 160 interviews of adult makers, young makers and young makers' parents, this dissertation unpacks how makers are learning, what they are learning, and how these qualities are applicable to education goals and the future of work in the 21st century. This research demonstrates that makers are learning valuable skills to prepare them for the future of work in the 21st century. Makers are learning communication skills, technical skills in fabrication and design, and developing lifelong learning strategies that will help prepare them for life in an increasingly technologically integrated future. This work discusses what aspects of the Maker Movement are most important for integration into higher education.

Technical Education: Careers Unlimited. Proceedings of The National Clinic on Technical Education (9th, Fort Worth, Texas, March 15-17, 1972).

ERIC Educational Resources Information Center

American Technical Education Association, Inc., Delmar, NY.

The Proceedings, attended by more than 400 technical educators from 42 States and two foreign countries, reflected various topics and information relative to the Clinic's theme. The speeches should assist technical educators and administrators at all post-secondary levels in the preparation of future manpower needs in technical education. The…

Aiming for excellence - A simulation-based study on adapting and testing an instrument for developing non-technical skills in Norwegian student nurse anaesthetists.

PubMed

Flynn, Fiona M; Sandaker, Kjersti; Ballangrud, Randi

2017-01-01

There is increasing focus on building safety into anaesthesia practice, with excellence in anaesthesia as an aspirational goal. Non-technical skills are an important factor in excellence and improved patient safety, though there have been few systematic attempts at integrating them into anaesthesia nursing education. This study aimed to test the reliability of NANTS-no, a specially adapted behavioural marker system for nurse anaesthetists in Norway, and explore the development of non-technical skills in student nurse anaesthetists. The pre-test post-test design incorporated a 10-week simulation-based programme, where non-technical skills in 14 student nurse anaesthetists were rated on three different occasions during high-fidelity simulation, before and after taking part in a training course. NANTS-no demonstrated high overall inter-rater reliability (ICC = 0.91), high test-retest reliability (ICC = 0.94) and good internal consistency (Cronbach's α of 0.85-0.92). A significant improvement was demonstrated across all categories of non-technical skills, with greatest improvements between the first and third and second and third sessions. There was also a significant improvement in two categories between the first and second sessions. NANTS-no is therefore suitable for assessing non-technical skills during simulation training in anaesthesia nursing education. More research is needed to validate its use in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Open Education as a Way for Space Education in Russia

NASA Astrophysics Data System (ADS)

Malyshev, V. V.; Karp, K. A.

2002-01-01

low level of state financial support. As a result there is a decreasing education quality. Scientific research was always an integral part of education and an alternative way for education financial support. But today the level of such support is too low as well. High experience of Russian space education system is not useful completely. This paper shows, that at present an open education could be a new step of space education in Russia. discussed in the paper. of students per one professor and also the number of students, which pay for education. New technology based on Internet technology would provide high methodology and technical level of education. The open education guarantees training in different areas and specialties on international standard level. education process, new education technology, new equipment of education system, new ways of financial support, international cooperation in education process, new professors and staffs in education system, increasing the level of salary for staff and comfortable conditions for students are discussed at the first. free education period, both traditional and new education methods are very important on the other side. about 4-5 years. The necessity of international educational system integration has to be taken into account. The international standard request, educational courses in different languages and free market conditions have to be under consideration. The partially ready open space education is discussed also. That system can be started even today.

Technology of interdisciplinary open-ended designing in engineering education

NASA Astrophysics Data System (ADS)

Isaev, A. P.; Plotnikov, L. V.; Fomin, N. I.

2017-11-01

Author’s technology of interdisciplinary open-ended engineering is presented in this article. This technology is an integrated teaching method that significantly increases the practical component in the educational program. Author’s technology creates the conditions to overcome the shortcomings in the engineering education. The basic ideas of the technology of open-ended engineering, experience of their implementation in higher education and the author’s vision of the teaching technology are examined in the article. The main stages of development process of the author’s technology of open-ended engineering to prepare students (bachelor) of technical profile are presented in the article. Complex of the methodological tools and procedures is shown in the article. This complex is the basis of the developed training technology that is used in educational process in higher school of engineering (UrFU). The organizational model of the technology of open-ended engineering is presented. Organizational model integrates the functions in the creation and implementation of all educational program. Analysis of the characteristics of educational activity of students working on author’s technology of interdisciplinary open-ended engineering is presented. Intermediate results of the application of author’s technology in the educational process of the engineering undergraduate are shown.

Multimedia Courseware Development for World Heritage Sites and Its Trial Integration into Instruction in Higher Technical Education

ERIC Educational Resources Information Center

Tsai, Shu-Chiao

2011-01-01

This study reports on creative ways of using technology in the classroom, specifically the development of multimedia courseware on World Heritage through which learners are able to upgrade their knowledge and cognition regarding historical and cultural legacies from the past, and to improve English skills. The content of the pilot courseware…

Career Education By Design: Making It Fit Your School, Your Curriculum and Your Teachers.

ERIC Educational Resources Information Center

Danley, Nancy; Waters, Christine

For students to successfully compete in the 21st century workforce, schools should prepare them to meet the demands of a dynamic and global job market, linking core knowledge with technical know-how, before they graduate. Integrating career curriculum into all grades and courses of study helps teachers to: (1) increase students' career awareness…

A Sisyphean Task: Historical Perspectives on the Relationship between Writing and Reading Instruction. Technical Report No. 7.

ERIC Educational Resources Information Center

Clifford, Geraldine Joncich

Based on the thesis that cycles of concern for an integrated, holistic approach to English language instruction have periodically emerged in reaction to historical forces that are essentially fragmenting in their effects, this thematic report explores events in 20th-century American educational theory, research, and practice that deal with English…

Integrating Career Skills into the English Class for ELLs: Promise and Peril

ERIC Educational Resources Information Center

DelliCarpini, Margo, Ed.

2010-01-01

Last year the author had the pleasure of working with a team of dedicated teachers in an alternative high school setting on the implementation of a grant she had written for their program. The grant was the Carl D. Perkins Career and Technical Education (CTE) Act grant, federally distributed to the states. As the grant writer and teacher…

Integration of the Common Core State Standards into CTE: Challenges and Strategies of Career and Technical Teachers

ERIC Educational Resources Information Center

Asunda, Paul A.; Finnell, Alicia M.; Berry, Nicholas R.

2015-01-01

In recent years, conversations about the importance of education standards in our school systems have intensified. Common Core State Standards (CCSS) are being implemented across most of the country. The standards require a major shift in instruction and the needed supports really are not there. This study investigated the common barriers,…

Work-Based Learning as a Pathway to Postsecondary and Career Success. Insights on Equity and Outcomes. Issue 18

ERIC Educational Resources Information Center

Rodriguez, Jacqueline; Fox, Heather; McCambly, Heather

2016-01-01

Work-based learning (WBL) is a key example of the integration of academic and occupational training that is central to career and technical education (CTE) and through which students have the ability to gain high-wage, high-skilled occupational experience while pursuing postsecondary credentials (Bragg, Dresser, & Smith, 2012; Chernus &…

World Wide Comparism of Technical and Vocational Education: Lessons for Nigerian Technical and Vocational Education Sector (I)

ERIC Educational Resources Information Center

Ayeni, Abiodun Olumide

2015-01-01

This paper compared technical/vocational education in: Germany, Australia, Finland, Hong Kong, Hungary, India, Japan, South Korea, Mexico, and Nigeria, and found that technical/vocational education was given proper attention in countries considered except Nigeria, where it was handled with laissez faire attitude. Set-Up of Technical/Vocational…

Career-Technical Education--The Immediate Need for Work-Based Curriculum.

ERIC Educational Resources Information Center

Nee, John G.

1994-01-01

Career-technical education may be informal on-the-job training, organized workplace education, community college or technical institute programs, or apprenticeships, internships, and cooperative agreements. Another alternative is polytechnical education: providing technical and general studies for adults in existing school facilities after school…

[Problems of X-ray mammology manpower training and management].

PubMed

Rozhkova, N I

2014-01-01

The paper considers the issues of manpower training in X-ray mammology. It mentions staff shortage and no special training, which reduces the efficient activities of X-ray mammographic rooms, as well as shortage of training facilities and no unified educational programs within interdisciplinary integration, inadequate technical equipment in the training facilities, the lack of an accounting system for training higher- and mid-level health workers, as well as engineers. Emphasis is placed on that the educational programs must comply with the organizational forms of testing the specialists to be employed. The introduction of a continuous education system should be accelerated to rule out the decay period of specialists' competence.

Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975). Human Resource Development: Technical Education's Challenge.

ERIC Educational Resources Information Center

Rutledge, Gene; And Others

This report includes the presentations of the speakers appearing before the National Clinic on Technical Education. Topics cover human resource development; the impact of technical education on economic development (in Mississippi); economics of allied health education; manpower implications of environmental protection; manpower needs for…

Environmental Education in Technical and Vocational Education. A Discussion Document for Unesco Training Seminars on the Incorporation of Environmental Education into Technical and Vocational Education. Environmental Education Series 24.

ERIC Educational Resources Information Center

Grabe, Sven

This paper is intended to serve as the basis for discussion of the scope and place of environmental education in technical and vocational education. It is addressed primarily to administrators, curriculum developers, and other active participants in the definition of scope and content of technical and vocational courses. After a brief introduction…

78 FR 13030 - Applications for New Awards; Native American Career and Technical Education Program (NACTEP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... DEPARTMENT OF EDUCATION Applications for New Awards; Native American Career and Technical...: Notice. Overview Information: Native American Career and Technical Education Program (NACTEP). Notice... Purpose of Program: The Native American Career and Technical Education Program (NACTEP) provides grants to...

The Utility of a Physics Education in Science Policy

NASA Astrophysics Data System (ADS)

Roberts, Drew

2016-03-01

In order for regulators to create successful policies on technical issues, ranging from environmental protection to distribution of national Grant money, the scientific community must play an integral role in the legislative process. Through a summer-long internship with the Science, Space, and Technology Committee of the U.S. House of Representatives, I have learned that skills developed while pursuing an undergraduate degree in physics are very valuable in the policy realm. My physics education provided me the necessary tools to bridge the goals of the scientific and political communities. The need for effective comprehension and communication of technical subjects provides an important opportunity for individuals with physics degrees to make substantial contributions to government policy. Science policy should be encouraged as one of the many career pathways for physics students. Society of Physics Students, John and Jane Mather Foundation for Science and the Arts.

Education Officers on board the JOIDES Resolution: A Three-Year Review and Assessment of a Unique Professional Development Opportunity

NASA Astrophysics Data System (ADS)

Cooper, S. K.; Peart, L.

2012-12-01

Deep Earth Academy - as the education department of the Integrated Ocean Drilling Program - has pioneered a unique approach to the role of educators on board ocean-going research expeditions. As Education Officers, the educator on board the JOIDES Resolution (JR) has the role of prime translator of the exciting geological, geochemical, microbiological and paleo-oceanographic science being done, with sole responsibility for coordinating the story of each expedition that is sent out to the broader world. For two months, the Education Officer coordinates - with participation from the science party and technical staff - blogs, social media postings, web site updates and live ship-to-shore events for a variety of shore-based audiences, including classrooms, museums, professional development workshops and media outlets. This presentation will include results of a three-year review of the experiences of the JR's Education Officers, including their perspectives on their role, the impacts on their lives, careers and students, and their recommendations for the program going forward. Data from surveys of the science parties and technical staff with whom they worked, live event feedback and focus groups will be shared. The presentation will also include video examples of the education officers at work. Opportunities to become involved in this professional development opportunity - either from the ship or shore - will be shared.

Projects for People: An International Exchange Focused on Drinking Water Quality in Rural Peru

NASA Astrophysics Data System (ADS)

Weathers, T. S.; Tarazona Vasquez, F.; Bailey, E.; Duong, V.; Gonzales Vera, R.; LaPorte, D.; Rojas Cala, B.; Torres Atencia, S.; Vasquez Auqui, J.

2016-12-01

The integration of human-centered design with technical engineering in a classroom setting can be challenging but immensely rewarding if coupled with a community-focused experience. Undergraduate students participated in an international exchange to address drinking water quality in the community of Huamancaca, located in the Junin region of Peru. Technical research and experimentation often comes easily to students in undergraduate engineering programs, however, implementation within a community requires a social license to operate. The objectives of this study were to address the technical challenges of designing a sustainable and effective water filtration system while also ensuring community support and education, coupled with user ownership of the process. In tandem with filter media experimentation with biochar and activated carbon produced using locally available agricultural waste from potatoes and carrots, we visited the people of Huamancaca to understand their needs and concerns. This direct communication with the community was invaluable; we observed that many of the residents' water quality problems could be solved with education. For example, proper sanitation techniques and appropriate addition of bleach or sufficient boiling time may make up for inconsistent water quality provided by the local distribution system. An education plan may also be developed for water treatment plant operators covering chlorine dosage for effective residual treatment within the distribution network in addition to filtration. Upon site visitation and sample collection, we realized that open communication with city officials, operators, business owners, and residents in both technical and social settings is essential for continued collaboration within this community. Solving a tangible problem or designing a product that can be effectively adopted is not a concept that is rigorously addressed in undergraduate education, however the setbacks, challenges, and triumphs experienced when interacting with a community can provide valuable lessons for career development.­

Vocational-Technical Education Financial Study. Executive Summary.

ERIC Educational Resources Information Center

Indiana State Board of Vocational and Technical Education, Indianapolis.

A review of Indiana's current system of financing public vocational-technical education was limited to these concerns: the resource needs of vocational-technical education to keep the current delivery system up-to-date and the resources necessary to expand vocational-technical education services to those not being served. Although the current…

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

A Case Study on the Status of Technical and Vocational Education in Thailand. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Shoolap, Charoon; Choomnoom, Siripan

This two-part report presents an overview of the vocational and technical education system in Thailand. The first part is a review of the current and likely future situations pertaining to vocational and technical education in that country. An analysis of economic conditions, human resource development, and the existing technical and vocational…

Do Primary Students Understand How Pregnancy Can Occur? A Comparison of Students in Jakarta, West Java, West Nusa Tenggara and South Sulawesi, Indonesia

ERIC Educational Resources Information Center

Utomo, Iwu Dwisetyani; McDonald, Peter; Reimondos, Anna; Utomo, Ariane; Hull, Terence H.

2014-01-01

In Indonesian primary schools, sex education is implicitly integrated into various related subjects, such as science, biology, social studies and religion. The technical facts of ovulation and sperm are mentioned in biology, although little or no connection is made between this process and sexual intercourse. By the end of primary school,…

[The use of telemedicine in dialysis and new professional practices].

PubMed

Grangier, Jean-Pierre

2016-11-01

Since 2006, a remote patient monitoring scheme using digital pens has enabled patients with chronic kidney disease to be monitored remotely in their own home. The implementation of this project was accompanied by a technical and economic study. Today, this scheme has evolved to integrate therapeutic patient education programmes and their evaluation. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

1983-84 Evaluation Report of Vocational and Technical Education in South Carolina.

ERIC Educational Resources Information Center

South Carolina State Advisory Council on Vocational and Technical Education, Columbia.

This evaluation report contains a series of articles on vocational and technical education encompassing the 1983-84 school year. The articles, collectively, are intended to give an overall picture of vocational and technical education programs in South Carolina. The lead article on technical education strongly urges several changes to bring about…

Predicting Influential Factors of Secondary Career and Technical Education Teachers' Intent to Stay in the Profession

ERIC Educational Resources Information Center

Dainty, Julie D.

2012-01-01

Retaining highly qualified career and technical education teachers is important in maintaining and growing quality secondary career and technical education programs. Therefore, the purpose of this study was to identify factors contributing to teacher retention specifically in the area of career and technical education (CTE) and determine…

IMPLICATIONS OF WOMEN'S WORK PATTERNS FOR PROGRAM DEVELOPMENT IN VOCATIONAL AND TECHNICAL EDUCATION.

ERIC Educational Resources Information Center

LEE, SYLVIA L.; AND OTHERS

THE IMPLICATIONS OF WOMEN'S LABOR FORCE PARTICIPATION FOR EDUCATORS AND LEADERS PLANNING PROGRAMS IN VOCATIONAL AND TECHNICAL EDUCATION WERE DERIVED AT A 2-DAY CONFERENCE BY 30 PEOPLE REPRESENTING THE VARIOUS SERVICES IN VOCATIONAL-TECHNICAL EDUCATION AND RELATED AREAS. IMPLICATIONS AND RECOMMENDATIONS FOR VOCATIONAL AND TECHNICAL EDUCATION…

Proceedings of the International Symposium on Technical and Vocational Education (Beijing, China, September 13-18, 1993).

ERIC Educational Resources Information Center

Chinese National Commission for UNESCO (China).

This document contains 28 papers: "Technical and Vocational Education in Asia and the Pacific: Regional Overview and Recent Innovations" (Muhammad Ashraf Qureshi); "Secondary Education in Austria" (Helmut Aigner); "The Development of Technical Curricula in Austria" (Helmut Aigner); "Technical and Vocational Education in Australia. Australian…

The integration of technology into the middle and high school science curriculum

NASA Astrophysics Data System (ADS)

Corbin, Jan Frederic

This study was to determine the level of technology implementation into the middle and high school science curriculum by beginning teachers. Research was conducted in two phases. The first phase was a survey that provided demographic data and determined the Level of Technology Implementation, Personal Computer Use, and Current Instructional Practice. Dr. Christopher Moersch developed the survey, Level of Technology Implementation (LoTi(c) ). The data provided insight into what technology teachers use, barriers associated with technology integration, teacher training and development, and technical support. Follow-up interviews were conducted to gather additional qualitative data and information. Analysis of the data found beginning teachers have not received enough technology training to integrate technology seamlessly into the science curriculum. Conclusions cite the need for more technology courses during preservice education, more time during the day for beginning teachers to learn to use the technology available at their schools, consolidation of inservice staff development offerings, and more technical support staff readily available. Recommendations were made to expand the study group to all science teachers, assess the technology capacity of all schools, and conduct needs assessment of inservice staff development.

Implications for Focusing Research in Career and Technical Education and Workforce Development

ERIC Educational Resources Information Center

Lambeth, Jeanea M.; Joerger, Richard M.; Elliot, Jack

2009-01-01

Education and educational research is shaped by philosophy, psychology, practice, and ever changing educational policies. Previous studies have expressed a need for a relevant and focused research agenda for career and technical education (CTE), workforce development education and career and technical education. A need for a relevant and timely…

Technical and Vocational Education in Asia and Oceania. Bulletin of the Unesco Regional Office for Education in Asia and Oceania. Number 21, June 1980.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This issue contains a regional review, discussion of technical and vocational education in countries of Asia and Oceania, articles dealing with various aspects of technical and vocational education, and a bibliographical supplement. The brief statistical review in section 1 concerns second-level technical and vocational education in the developing…

77 FR 9216 - Native American Career and Technical Education Program; Proposed Waivers and Extension of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Proposed Waivers... Education, Department of Education. ACTION: Notice. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career and Technical Education Program (NACTEP), the Secretary proposes...

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

Non-technical skills assessment for prelicensure nursing students: An integrative review.

PubMed

Pires, Sara; Monteiro, Sara; Pereira, Anabela; Chaló, Daniela; Melo, Elsa; Rodrigues, Alexandre

2017-11-01

In nursing, non-technical skills are recognized as playing an important role to increase patient safety and successful clinical outcomes (Pearson and McLafferty, 2011). Non-technical skills are cognitive and social resource skills that complement technical skills and contribute to safe and efficient task performance (Flin et al., 2008). In order to effectively provide non-technical skills training, it is essential to have an instrument to measure these skills. An online search was conducted. Articles were selected if they referred to and/or described instruments assessing non-technical skills for nurses and/or prelicensure nursing students in educational, clinical and/or simulated settings with validation evidence (inclusion criteria). Of the 53 articles located, 26 met the inclusion criteria. Those referred to and/or described 16 instruments with validation evidence developed to assess non-technical skills in multidisciplinary teams including nurses. Although articles have shown 16 valid and reliable instruments, to our knowledge, no instrument has been published or developed and validated for the assessment of non-technical skills of only nurses in general, relevant for use in high-fidelity simulation-based training for prelicensure nursing students. Therefore, there is a need for the development of such an instrument. Copyright © 2017 Elsevier Ltd. All rights reserved.

Human Resource Development: Technical Education's Challenge. Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975).

ERIC Educational Resources Information Center

Washington State Community Coll. District 17, Spokane.

Speeches and discussions are transcribed in this report, which also includes a listing of the American Technical Education Association (ATEA) committee members, exhibitors, officers, and directory of speakers. Speeches covered "Human Resource Development" by Gene Rutledge; "The Impact of Technical Education on Economic…

Improving Student Writing: Methods You Can Use in Science and Engineering Classrooms

NASA Astrophysics Data System (ADS)

Hitt, S. J.; Bright, K.

2013-12-01

Many educators in the fields of science and engineering assure their students that writing is an important and necessary part of their work. According to David Lindsay, in Scientific Writing=Thinking in Words, 99% of scientists agree that writing is an integral part of their jobs. However, only 5% of those same scientists have ever had formal instruction in scientific writing, and those who are also educators may then feel unconfident in teaching this skill to their students (2). Additionally, making time for writing instruction in courses that are already full of technical content can cause it to be hastily and/or peremptorily included. These situations may be some of the contributing factors to the prevailing attitude of frustration that pervades the conversation about writing in science and engineering classrooms. This presentation provides a summary of past, present, and ongoing Writing Center research on effective writing tutoring in order to give science and engineering educators integrated approaches for working with student writers in their disciplines. From creating assignments, providing instruction, guiding revisions, facilitating peer review, and using assessments, we offer a comprehensive approach to getting your students motivated to improve their writing. Our new research study focuses on developing student writing resources and support in science and engineering institutions, with the goal of utilizing cross-disciplinary knowledge that can be used by the various constituencies responsible for improving the effectiveness of writing among student engineers and scientists. We will will draw upon recent findings in the study of the rhetoric and compositional pedagogy and apply them to the specific needs of the science and engineering classroom. The fields of communication, journalism, social sciences, rhetoric, technical writing, and philosophy of science have begun to integrate these findings into classroom practice, and we will show how these can also benefit educators in science and engineering, with the goal of producing more effective student writing.

Technical and Vocational Education and Training in Peace Education: Solomon Islands

ERIC Educational Resources Information Center

Maebuta, Jack

2011-01-01

Technical and vocational education and training programs as a form of peace education are examined in this paper. It explores the notion of educating for a culture of peace through refocusing technical and vocational education and training programs on sustainable community development in the Solomon Islands. It further highlights the policy and…

Integration of Research Into Grade Nine-Graduate Level Curricula

NASA Astrophysics Data System (ADS)

Bonner, J.; Callicott, K.; Page, C.

2004-05-01

Research on the Kolb Learning Cycle, engineering education, and recent cognitive learning research indicates that learning occurs through knowledge application. Moreover, experts in a given discipline will differ from novices with regard to their ability to transfer their knowledge by application to new contexts. We have developed a suite of educational opportunities to bridge the gap between research and the classroom, with activities spanning the educational spectrum from high school through graduate school. One mechanism for transferring of research into undergraduate/graduate curricula is through our National Science Foundation (NSF) funded Combined Research-Curriculum Development (CRCD) project ("Environmental Informatics in Coastal Margins"). This project modifies engineering curricula to provide the nation with the next generation of engineers who can utilize the latest environmental modeling tools. The project revises/creates three undergraduate courses forming the environmental informatics (EI) track of the civil engineering curriculum and two graduate courses integrating GIS and environmental measurements. Curriculum development efforts are guided by an expert team drawn from nearby campuses and both regional and national industry, and includes an expert in assessing the pedagogical value of the curriculum and developing suitable metrics to evaluate student learning experiences. Another NSF-funded project integrating research into an undergraduate educational setting is our Research Experience for Undergraduates (REU) project ("Undergraduate Research in Biodiversity and Ecological Processes in Fluctuating Environments"). Research includes overlapping topics in environmental engineering and life sciences. The summer research experience provides students an opportunity to integrate engineering and life science technologies and to the study of ecological processes associated with biodiversity and environmental quality. Students orally present their project and submit in-depth papers. Over twenty publications/proceedings papers have been generated thus far. A third project involves our collaborations with the ITS Center ("Information Technology in Science Center for Teaching and Learning") on the A&M campus. As an investment in "project team growing", the Center is collaborating with us to collect data on implementation of an engineering science and math enhancement module in Hearne Independent School District. The specific activity involves a CRCD engineering class and an educational psychology undergraduate class. The engineering students give group presentations, where each presentation addresses a scenario that focuses on an environmental topic presented in the class. The students present the technical material to the education students who serve as a non-technical lay audience, emulating a city council, for example. The education students adapt the material for presentation to high school students, working with mentor teachers to enhance content, relevance and hands on experience while learning to apply teaching pedagogy.

Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

NASA Technical Reports Server (NTRS)

Moon, James

2004-01-01

My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

A Practical Guide To Developing Effective Web-based Learning

PubMed Central

Cook, David A; Dupras, Denise M

2004-01-01

OBJECTIVE Online learning has changed medical education, but many “educational” websites do not employ principles of effective learning. This article will assist readers in developing effective educational websites by integrating principles of active learning with the unique features of the Web. DESIGN Narrative review. RESULTS The key steps in developing an effective educational website are: Perform a needs analysis and specify goals and objectives; determine technical resources and needs; evaluate preexisting software and use it if it fully meets your needs; secure commitment from all participants and identify and address potential barriers to implementation; develop content in close coordination with website design (appropriately use multimedia, hyperlinks, and online communication) and follow a timeline; encourage active learning (self-assessment, reflection, self-directed learning, problem-based learning, learner interaction, and feedback); facilitate and plan to encourage use by the learner (make website accessible and user-friendly, provide time for learning, and motivate learners); evaluate learners and course; pilot the website before full implementation; and plan to monitor online communication and maintain the site by resolving technical problems, periodically verifying hyperlinks, and regularly updating content. CONCLUSION Teaching on the Web involves more than putting together a colorful webpage. By consistently employing principles of effective learning, educators will unlock the full potential of Web-based medical education. PMID:15209610

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2014-07-01 2014-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2013-07-01 2013-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2012-07-01 2012-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2011-07-01 2011-07-01 false How may a State provide technical assistance? 403.187...

Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

ERIC Educational Resources Information Center

Efande, Lyonga John

2015-01-01

This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

Description and student self-evaluation of a pilot integrated small group learning and simulation programme for medical students in the first clinical year.

PubMed

Levinson, Michele; Kelly, Diane; Zahariou, Krisoula; Johnson, Matthew; Jackman, Christine; Mackenzie, Sara

2017-02-01

Contemporary education for medical students should be student-centred, integrated and contextualised. Small group learning promotes clinical reasoning and skills for lifelong learning. Simulation can provide experiential learning in a safe and controlled environment. We developed a weekly integrated problem-based learning and simulation programme (IPS) over two semesters in the first clinical year to augment clinical placement experience and contextualise theory into work-relevant practice. To evaluate the new programme at Kirkpatrick level 1. An anonymous survey of participating students. The programme was well liked. Students found the programme relevant and that they had a better understanding of patient safety and the assessment of the deteriorating patient. They felt it contributed to integration of theory and practice, clinical reasoning and the acquisition of non-technical skills, particularly affective and communication elements. This IPS programme in the first clinical year can deliver a student-centred curriculum to complement clinical placement that delivers the important requirements of contemporary medical student education. © 2016 Royal Australasian College of Physicians.

Employing subgoals in computer programming education

NASA Astrophysics Data System (ADS)

Margulieux, Lauren E.; Catrambone, Richard; Guzdial, Mark

2016-01-01

The rapid integration of technology into our professional and personal lives has left many education systems ill-equipped to deal with the influx of people seeking computing education. To improve computing education, we are applying techniques that have been developed for other procedural fields. The present study applied such a technique, subgoal labeled worked examples, to explore whether it would improve programming instruction. The first two experiments, conducted in a laboratory, suggest that the intervention improves undergraduate learners' problem-solving performance and affects how learners approach problem-solving. The third experiment demonstrates that the intervention has similar, and perhaps stronger, effects in an online learning environment with in-service K-12 teachers who want to become qualified to teach computing courses. By implementing this subgoal intervention as a tool for educators to teach themselves and their students, education systems could improve computing education and better prepare learners for an increasingly technical world.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2001-01-01

This is a listing of recent unclassified RTO technical publications processed by the NASA Center for AeroSpace Information from January 1, 2001 through March 31, 2001 available on the NASA Aeronautics and Space Database. Contents include 1) Cognitive Task Analysis; 2) RTO Educational Notes; 3) The Capability of Virtual Reality to Meet Military Requirements; 4) Aging Engines, Avionics, Subsystems and Helicopters; 5) RTO Meeting Proceedings; 6) RTO Technical Reports; 7) Low Grazing Angle Clutter...; 8) Verification and Validation Data for Computational Unsteady Aerodynamics; 9) Space Observation Technology; 10) The Human Factor in System Reliability...; 11) Flight Control Design...; 12) Commercial Off-the-Shelf Products in Defense Applications.

Medical Ultrasound Technology Research and Development at the University of Washington Center for Industrial and Medical Ultrasound

DTIC Science & Technology

2003-10-02

provide a world-class, advanced research center for bioengineering development and graduate education in high-intensity, focused ultrasound ( HIFU ). This...convenient, and robust. These technological enhancements have enabled the development of HIFU arrays and image-guided ultrasound systems for greater... Ultrasound (CIMU). The many disparate facilities and technical capabilities available to CIMU staff and students were integrated and enhanced to

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

Project T.E.A.M. (Technical Education Advancement Modules). Final Report.

ERIC Educational Resources Information Center

Greenville Technical Coll., SC.

Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training, created an introductory technical training program and a consumer education package emphasizing the benefits of technical training. The curriculum and training focus of the project began with an assessment of employee needs in…

The Marketability of Technical Graduates from Higher Educational Institutions (HEIs) Offering Technical and Vocational Education and Training (TVET): A Case from Malaysia

ERIC Educational Resources Information Center

Rajadurai, Jegatheesan; Sapuan, Noraina Mazuin; Daud, Salina; Abidin, Nurazariah

2018-01-01

Technical, Vocational Education and Training has been viewed as a means of developing a nation. The marketability of technical graduates is reliant on whether these graduates possess the attributes demanded by their respective industries. Hence, this study aims to investigate the gap between the key attributes of Higher Education Institutions'…

RESEARCH AND DEVELOPMENT PRIORITIES IN TECHNICAL EDUCATION, A REPORT OF A NATIONAL RESEARCH PLANNING CONFERENCE IN TECHNICAL EDUCATION (THE OHIO STATE UNIVERSITY, JANUARY 10-11, 1967).

ERIC Educational Resources Information Center

MILLER, AARON J.

A SELECT GROUP OF PARTICIPANTS REPRESENTING NATIONAL LEADERSHIP IN BUSINESS, INDUSTRY, RESEARCH, GOVERNMENT, AND EDUCATION MET TO IDENTIFY SOME OF THE MOST OBVIOUS NEW EMERGING TECHNICAL OCCUPATIONS WHICH MIGHT REQUIRE RESEARCH AND DEVELOPMENT EFFORTS AND SOME OF THE MOST PRESSING RESEARCHABLE PROBLEM AREAS IN TECHNICAL EDUCATION. THE NEW OR…

Quality Assurance of Teachers in the Implementation of the Curriculum of Technical and Vocational Education in Colleges of Education (Technical) in North Cental Nigeria

ERIC Educational Resources Information Center

Attaochu, Egbita Ugbalu

2013-01-01

This study was carried out to ascertain the quality assurance of teachers (lecturers) in the implementation of the curriculum of Technical and Vocational Education (TVE) in Colleges of Education (Technical) in North Central Nigeria. Two research questions were formulated and answered in this study. Survey research and evaluation designs were…

78 FR 40459 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... DEPARTMENT OF EDUCATION Applications for New Awards; Technical Assistance and Dissemination To... AGENCY: Office of Special Education and Rehabilitative Services, Office of Elementary and Secondary Education, Department of Education. ACTION: Notice. Overview Information Technical Assistance and...

34 CFR 412.1 - What is the National Network for Curriculum Coordination in Vocational and Technical Education?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the National Network for Curriculum... EDUCATION NATIONAL NETWORK FOR CURRICULUM COORDINATION IN VOCATIONAL AND TECHNICAL EDUCATION General § 412.1 What is the National Network for Curriculum Coordination in Vocational and Technical Education? The...

34 CFR 412.1 - What is the National Network for Curriculum Coordination in Vocational and Technical Education?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the National Network for Curriculum... EDUCATION NATIONAL NETWORK FOR CURRICULUM COORDINATION IN VOCATIONAL AND TECHNICAL EDUCATION General § 412.1 What is the National Network for Curriculum Coordination in Vocational and Technical Education? The...

Medical universities educational and research online services: benchmarking universities' website towards e-government.

PubMed

Farzandipour, Mehrdad; Meidani, Zahra

2014-06-01

Websites as one of the initial steps towards an e-government adoption do facilitate delivery of online and customer-oriented services. In this study we intended to investigate the role of the websites of medical universities in providing educational and research services following the E-government maturity model in the Iranian universities. This descriptive and cross- sectional study was conducted through content analysis and benchmarking the websites in 2012. The research population included the entire medical university website (37). Delivery of educational and research services through these university websites including information, interaction, transaction, and Integration were investigated using a checklist. The data were then analyzed by means of descriptive statistics and using SPSS software. Level of educational and research services by websites of the medical universities type I and II was evaluated medium as 1.99 and 1.89, respectively. All the universities gained a mean score of 1 out of 3 in terms of integration of educational and research services. Results of the study indicated that Iranian universities have passed information and interaction stages, but they have not made much progress in transaction and integration stages. Failure to adapt to e-government in Iranian medical universities in which limiting factors such as users' e-literacy, access to the internet and ICT infrastructure are not so crucial as in other organizations, suggest that e-government realization goes beyond technical challenges.

How Should "Quality" Technical Education and Training Be Defined? A Statement from the National Council for Occupational Education.

ERIC Educational Resources Information Center

Everett, James; Gershwin, Mary; Hayes, Homer; Jacobs, James; Mundhenk, Robert

Although objectively measurable achievement of outcomes is an important guide to the quality of education, the process of defining and assuring the quality of technical education and training must include consideration for the context in which technical education and training occurs. It is also critical to remember that education has two sets of…

The CHPRC Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the CH2M Hill Plateau Remediation Company, LLC (CHPRC) Groundwater and Technical Integration Support (Master Project) is for Pacific Northwest National Laboratory staff to provide technical and integration support to CHPRC. This work includes conducting investigations at the 300-FF-5 Operable Unit and other groundwater operable units, and providing strategic integration, technical integration and assessments, remediation decision support, and science and technology. The projects under this Master Project will be defined and included within the Master Project throughout the fiscal year, and will be incorporated into the Master Project Plan. This Quality Assurance Management Plan provides the quality assurancemore » requirements and processes that will be followed by the CHPRC Groundwater and Technical Integration Support (Master Project) and all releases associated with the CHPRC Soil and Groundwater Remediation Project. The plan is designed to be used exclusively by project staff.« less

Financing Technical and Vocational Education: Modalities and Experiences.

ERIC Educational Resources Information Center

German Foundation for International Development (DSE), Bonn (Germany).

The two papers in this document explain various options and modalities for UNEVOC (International Project on Technical and Vocational Education) Member States' financing of their individual systems of technical and vocational education and disseminating experiences in this area. "Financing Vocational Education and Training in Developing…

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures

PubMed Central

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-01-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. PMID:26803655

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

PubMed

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-02-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

An Analysis of Costs and Cenefits Associated with Initial Contracting Technical Education and Training for Unrestricted Marine Officers

DTIC Science & Technology

2017-03-01

COSTS AND BENEFITS ASSOCIATED WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS by Lee A. White...WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS 5. FUNDING NUMBERS 6. AUTHOR(S) Lee A. White 7. PERFORMING...unlimited. AN ANALYSIS OF COSTS AND BENEFITS ASSOCIATED WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS

The MetSkill Program — Rapidly Developing Effective Young Engineers in the Workplace

NASA Astrophysics Data System (ADS)

Drinkwater, Diana; Bianco, Nina

MetSkill is a professional development program for metallurgical engineers that integrates with normal duties in their first one or two years of service. Graduates work together on a structured technical project, facilitated by specialists and supported by formal learning, and ultimately reported to their technical managers. The program enables graduates to "fill the gaps" in their undergraduate education, which is increasingly pertinent as engineering degrees become more general. Participants report that they enjoy the focus on more challenging (rewarding) aspects of their jobs and feel more confident about problem solving. Sponsor companies add that the relationships developed with external technical specialists enhances opportunities for innovation and development. MetSkill was delivered to two major resource companies in Australia in 2012. This paper provides an outline of the program and the reasons for its success, and demonstrates how the learning model could be applied to groups of graduates in other engineering disciplines.

Twelve tips for the effective use of videos in medical education.

PubMed

Dong, Chaoyan; Goh, Poh Sun

2015-02-01

Videos can promote learning by either complementing classroom activities, or in self-paced online learning modules. Despite the wide availability of online videos in medicine, it can be a challenge for many educators to decide when videos should be used, how to best use videos, and whether to use existing videos or produce their own. We outline 12 tips based on a review of best practices in curriculum design, current research in multimedia learning and our experience in producing and using educational videos. The 12 tips review the advantages of using videos in medical education, present requirements for teachers and students, discuss how to integrate video into a teaching programme, and describe technical requirements when producing one's own videos. The 12 tips can help medical educators use videos more effectively to promote student engagement and learning.

Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-12-31

The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical,more » and technical literacy and competency. This report discusses fiscal year 1993 activities.« less

Scope and Challenges of Technical Education: A Kerala Perspective

ERIC Educational Resources Information Center

Rahman, M. Abdul; Unnikrishnan, Ramesh

2015-01-01

Technical education contributes a major share to the overall education system and plays a vital role in the social and economic development of our nation. Since independence, the technical education system in our country has grown into a fairly large-sized system, offering opportunities for education and training in a wide variety of trades and…

WORKING WITH STUDENTS INSIDE AND OUTSIDE THE CLASSROOM IN ADULT BASIC EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

BRAZZIEL, WILLIAM F.

TECHNICAL EDUCATION OF THE ADULT HARD-CORE UNEMPLOYED OFTEN FAILS BECAUSE OF PERSONAL PROBLEMS AND BASIC EDUCATION AND CULTURAL LACKS. A BROAD CONCEPT OF EDUCATION IS ESSENTIAL TO PROGRAMS FOR DEVELOPMENT OF TECHNICAL SKILLS. A COLLEGE PROJECT DESIGNED TO MEET THESE REQUIREMENTS IS PRESENTED. A COMBINATION OF BASIC AND TECHNICAL EDUCATION WITH THE…

Gravitational Influences on the Growth of Polydiacetylene Films by Ultraviolet Solution Polymerization

NASA Technical Reports Server (NTRS)

Frazier, Donald O.

2000-01-01

Technically, the field of integrated optics using organic/polymer materials as a new means of information processing, has emerged as of vital importance to optical computers, optical switching, optical communications, the defense industry, etc. The goal is to replace conventional electronic integrated circuits and wires by equivalent miniaturized optical integrated circuits and fibers, offering larger bandwidths, more compactness and reliability, immunity to electromagnetic interference and less cost. From the Code E perspective, this research area represents an opportunity to marry "front-line" education in science and technology with national scientific and technological interests while maximizing human resources utilization. This can be achieved by the development of untapped resources for scientific research - such as minorities, women, and universities traditionally uninvolved in scientific research.

NPS Draws CTE Educators from around the Country

ERIC Educational Resources Information Center

Emeagwali, N. Susan

2010-01-01

In this article, the author describes the Association for Career and Technical Education's (ACTE) National Policy Seminar (NPS) which successfully brought hundreds of career and technical educators to Arlington, Virginia. The event, which was held March 8-10, provided career and technical education (CTE) professionals with an opportunity to keep…

Education for a Working America. A Vision of Vocational Technical Education.

ERIC Educational Resources Information Center

National Association of State Directors of Vocational Technical Education Consortium.

This document presents the views of the National Association of State Directors of Vocational Technical Education regarding the challenge, mission, vision, underlying principles, practice, needs, and benefits/potential outcomes of vocational-technical education (VTE). The following topics are discussed: the challenge of making VTE the cornerstone…

Aligning Career and Technical Education

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2011-01-01

The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

Laboratory Characteristics in Technical Education.

ERIC Educational Resources Information Center

Ives, Quay D.

The research reported is intended to provide a body of information on technical-scientific shop and laboratory education in the field of technological education. The study seeks to address the dearth of organized information on the utilization of laboratories in the technical education context. Various programs involving use of laboratories are…

Technical Education in Nigeria: The Way Forward. Summary of Proceedings of the Workshop on Technical Education: A Foundation for a Healthy Economy (Ota, Ogun State of Nigeria, March 1-2, 1994).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This summary of proceedings includes papers from and about a workshop on technical education in Nigeria and the lessons Nigeria may gain by examining the vocational and technical education systems of Germany, the United States, Great Britain, and Japan. The following papers are included: "Foreword" (Iyorchia Ayu); "Introduction: A…

Information Technologies (ITs) in Medical Education.

PubMed

Masic, Izet; Pandza, Haris; Toromanovic, Selim; Masic, Fedja; Sivic, Suad; Zunic, Lejla; Masic, Zlatan

2011-09-01

Advances in medicine in recent decades are in significant correlation with the advances in the information technology. Modern information technologies (IT) have enabled faster, more reliable and comprehensive data collection. These technologies have started to create a large number of irrelevant information, which represents a limiting factor and a real growing gap, between the medical knowledge on one hand, and the ability of doctors to follow its growth on the other. Furthermore, in our environment, the term technology is generally reserved for its technical component. Education means, learning, teaching, or the process of acquiring skills or behavior modification through various exercises. Traditionally, medical education meant the oral, practical and more passive transferring of knowledge and skills from the educators to students and health professionals. For the clinical disciplines, of special importance are the principles, such as, "learning at bedside," aided by the medical literature. In doing so, these techniques enable students to contact with their teachers, and to refer to the appropriate literature. The disadvantage of these educational methods is in the fact, that teachers often do not have enough time. Additionally they are not very convenient to the horizontal and vertical integration of teaching, create weak or almost no self education, as well as, low skill levels and poor integration of education with a real social environment. In this paper authors describe application of modern IT in medical education - their advantages and disadvantages comparing with traditional ways of education.

Work Values and Job Satisfaction of Arkansas Business Educators in Secondary Systems and Community/Technical Colleges.

ERIC Educational Resources Information Center

Funderburg, Dinnah L.; Kapes, Jerome T.

The work values and job satisfaction of Arkansas business educators in secondary school systems and community/technical colleges were examined through a survey of a random sample of 129 of Arkansas' 926 secondary and community/technical college business educators. Of those teachers sent surveys (67 secondary and 62 community/technical college…

Technical Working Group on Career and Technical Education Meeting. Meeting Summary (Washington, DC, September 22, 2017)

ERIC Educational Resources Information Center

Ahn, Judie

2017-01-01

On September 22, 2017, the National Center for Special Education Research (NCSER) and the National Center for Education Research (NCER) at the Institute of Education Sciences (IES) convened a group of experts in policy, practice, and research related to Career and Technical Education (CTE). The goal of the meeting was to seek input from…

Differences between General and Talented Students' Perceptions of Their Career and Technical Education Experiences Compared to Their Traditional High School Experiences

ERIC Educational Resources Information Center

Gentry, Marcia; Peters, Scott J.; Mann, Rebecca L.

2007-01-01

Career and technical education represents an important and understudied educational option for high school students. This qualitative study utilized data from one exemplary career and technical education (CTE) center to address the question of how talented and general education students' part-time CTE experiences differed from their traditional…

The Secondarization of Technical Education in Argentina and the Professionalization of Secondary Education in Brazil in a Comparative Perspective.

ERIC Educational Resources Information Center

Gallart, Maria Antonia

The evolution of technical education in Argentina has not been so much a process of vocationalization of academic education as a process of secondarization of vocational education. Argentine technical schools are the product of a process of convergence among terminal trade schools, vocational schools, and industrial technological schools that has…

Origins, Chronology, and Current Status of the National Research Center for Career and Technical Education: 1963-2012

ERIC Educational Resources Information Center

Lewis, Morgan V.; Stone, James R., III

2013-01-01

The National Research Center for Career and Technical Education (NRCCTE) had a unique status among federally funded research and development center in education. Its funding was authorized by the federal legislation for career and technical and administered by the Office of Vocational and Adult Education, not the Institute for Education Sciences.…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 32: Intermediate Oscillators; Module 33: Special Devices; Module 34: Linear Integrated Circuits. Students Guide.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This student guidebook is designed for use with the study booklets in modules 32 through 34 included in the military-developed course on basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. An…

The Development of Technical and Vocational Education in India--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Mishra, Arun K.

Education has a place of high priority on India's development agenda. The technical/vocational education (TVE) system is multisectoral with each ministry responsible for labor force development in that sector. The TVE programs in the formal education system are either state delivered or financed. The higher secondary vocational education program…

New Wine in New Bottles: Transforming Vocational Education into Career and Technical Education. Practice Application Brief No. 21.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Teachers responsible for transforming their vocational education programs into career and technical education (CTE) programs need to concentrate on ensuring programs' technical and academic rigor, engaging in collaboration in school and in the community, keeping current through professional development experiences, and extending learning beyond…

STRATEGIES FOR OPTIMIZING THE APPLICATION OF MEDIA TO VOCATIONAL AND TECHNICAL EDUCATION CURRICULA.

ERIC Educational Resources Information Center

CHRISTENSEN, VIRGIL E.; TAYLOR, ROBERT E.

THE ASSUMPTION IS MADE THAT VOCATIONAL AND TECHNICAL EDUCATION IS "UNDEVELOPED" IN TERMS OF ADEQUATELY EXPLOITING THE FULL RANGE OF POSSIBILITIES INHERENT IN MODERN EDUCATIONAL MEDIA AND TECHNOLOGY. THIS PAPER PRESENTS AN OVERVIEW OF THE BROAD SETTING IN WHICH VOCATIONAL AND TECHNICAL EDUCATION FUNCTIONS, THE GENERAL BENEFITS OF APPLICATIONS OF…

Developments in Technical Education in the British Caribbean, 1940-60.

ERIC Educational Resources Information Center

Pemberton, S. Macpherson

The paper discusses developments in technical education in the British West Indies from 1940-1960 emphasizing the relation between education and economic development. The objective is to analyze the economic basis of progress in technical education. The document is presented in four chapters. Chapter I summarizes historical background prior to…

Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

ERIC Educational Resources Information Center

Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

2014-01-01

As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

Philosophical and Sociological Overview of Vocational Technical Education in Nigeria

ERIC Educational Resources Information Center

Kennedy, Odu Oji

2012-01-01

Vocational Technical Education is any kind of education which has the main purpose of preparing one for employment in recognized occupation. The foundation of vocational technical education is based on philosophy which was mainly established for self-employment and self-reliance of the individual(s) who partake in it. Viewing the philosophy and…

Personality Type Profiles of Beginning Secondary Technical Education Teachers in West Virginia.

ERIC Educational Resources Information Center

Gordon, Howard R. D.

A study developed and examined personality type preference profiles of beginning secondary technical education teachers in West Virginia. The target population consisted of all beginning secondary technical education teachers (n=34) employed by the West Virginia Department of Education during the 1998-99 school year. The Myers-Briggs Type…

The Secretary's Awards for Outstanding Vocational-Technical Education Programs. 1995.

ERIC Educational Resources Information Center

Office of Vocational and Adult Education (ED), Washington, DC.

This publication describes the 12 winning programs and the 9 semifinalists of the 1995 U.S. Secretary of Education's Awards for Outstanding Vocational-Technical Education Programs. The awards program was established in 1981 to recognize excellence in local school-to-work and vocational-technical education programs, services, and activities that…

Agricultural In-Service Needs of Introductory Level Career and Technical Education Teachers

ERIC Educational Resources Information Center

Christensen, Jolene; Warnick, Brian K.; Spielmaker, Debra; Tarpley, Rudy S.; Straquadine, Gary S.

2009-01-01

This study identified and prioritized the agricultural in-service needs of introductory level career and technical education teachers in Utah. The Utah State Board of Education requires that all seventh grade students complete an introductory career and technical education course as their first formal career exploration experience. One component…

The Annual Career and Technical Education High School Report, 2007

ERIC Educational Resources Information Center

Iowa Department of Education, 2007

2007-01-01

This report, the first "Annual Career and Technical Education High School Report" was created to serve as a rich resource for educators, school and college administrators, policymakers, and other citizens by providing essential summative data on career and technical education in Iowa at the high school level. Students increasingly need…

A Study of Learning-Centered Leadership Skills of Principals in Career and Technical Education Schools

ERIC Educational Resources Information Center

Rodman, Mary E.

2012-01-01

Despite years of educational reform, secondary students have demonstrated only modest increases in achievement. Career and technical education students have not demonstrated the same level of performance as non-career and technical education students. Except for teachers, principals have the greatest influence over student achievement. What should…

77 FR 30512 - Native American Career and Technical Education Program; Final Waivers and Extension of Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Final Waivers and... American Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84.101A. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career...

Establishment of a National Wind Energy Center at University of Houston

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Su Su

The DOE-supported project objectives are to: establish a national wind energy center (NWEC) at University of Houston and conduct research to address critical science and engineering issues for the development of future large MW-scale wind energy production systems, especially offshore wind turbines. The goals of the project are to: (1) establish a sound scientific/technical knowledge base of solutions to critical science and engineering issues for developing future MW-scale large wind energy production systems, (2) develop a state-of-the-art wind rotor blade research facility at the University of Houston, and (3) through multi-disciplinary research, introducing technology innovations on advanced wind-turbine materials, processing/manufacturingmore » technology, design and simulation, testing and reliability assessment methods related to future wind turbine systems for cost-effective production of offshore wind energy. To achieve the goals of the project, the following technical tasks were planned and executed during the period from April 15, 2010 to October 31, 2014 at the University of Houston: (1) Basic research on large offshore wind turbine systems (2) Applied research on innovative wind turbine rotors for large offshore wind energy systems (3) Integration of offshore wind-turbine design, advanced materials and manufacturing technologies (4) Integrity and reliability of large offshore wind turbine blades and scaled model testing (5) Education and training of graduate and undergraduate students and post- doctoral researchers (6) Development of a national offshore wind turbine blade research facility The research program addresses both basic science and engineering of current and future large wind turbine systems, especially offshore wind turbines, for MW-scale power generation. The results of the research advance current understanding of many important scientific issues and provide technical information for solving future large wind turbines with advanced design, composite materials, integrated manufacturing, and structural reliability and integrity. The educational program have trained many graduate and undergraduate students and post-doctoral level researchers to learn critical science and engineering of wind energy production systems through graduate-level courses and research, and participating in various projects in center’s large multi-disciplinary research. These students and researchers are now employed by the wind industry, national labs and universities to support the US and international wind energy industry. The national offshore wind turbine blade research facility developed in the project has been used to support the technical and training tasks planned in the program to accomplish their goals, and it is a national asset which is available for used by domestic and international researchers in the wind energy arena.« less

Engineering and Technical Education in Russia, in Numbers

ERIC Educational Resources Information Center

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

Results of the Boulder Consultation: The Beginnings of a Technical Assistance Program for the Office of Environmental Education/USOE/HEW.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC. Office of Environmental Education.

In December 1977, the Office of Environmental Education (OEE) brought its fiscal year '77 grant recipients together in Boulder, Colorado, for a technical assistance consultation. The technical assistance responsibilities of OEE are mandated by the Environmental Education Act. Until this consultation, OEE had been giving its technical assistance on…

Proceedings of the Annual National Clinic on Technical Education (13th, Monroe Community College, Rochester, New York, March 24-26, 1976).

ERIC Educational Resources Information Center

Bureau of Occupational and Adult Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

The keynote address, "Productivity as a Means of Economic Development," by Donald C. Burnham, and 20 other conference presentations on technical education are included in these proceedings. Titles are as follows: A Technical College Responds to a Need for Productivity; The Industrial Answer to Productivity Through Technical Education; An Overview…

Role of Scientific and Technical Libraries in Education and Technical Creative Work of the Soviet People.

ERIC Educational Resources Information Center

Tyshkevich, N. I.

Emphasis is placed on the role of scientific and technical libraries in the education of Soviet workers. One of the main tasks of technical libraries is to educate workers to respect their professions, and to maintain communistic attitudes towards labor. Librarians acquaint younger workers with literature on the history of their plants with…

New Directions for High School Career and Technical Education in Wyoming: A Strategic Plan

ERIC Educational Resources Information Center

Hoachlander, Gary; Klein, Steven; Studier, Carol

2007-01-01

This report offers a plan for improving career and technical education (CTE) in Wyoming, but it is about more than just technical education. Realizing the potential of CTE to contribute to students' mastery of both academic and technical knowledge depends not only on strengthening the CTE curriculum, but also on embedding CTE in a larger program…

Economic Returns to Sub-Baccalaureate Technical Education: A Study of Labor Market Outcomes for Manufacturing Engineering Technologist and Technician Education (METTE) Programs in the Wisconsin Technical College System

ERIC Educational Resources Information Center

Matheny, Christopher J.

2013-01-01

The purpose of this study is to examine the labor market outcomes of sub-baccalaureate education for individuals attending Manufacturing Engineering Technologist and Technician Education (METTE) programs in the Wisconsin Technical College System. Increasingly, public policy for postsecondary education and economic development, as well as decisions…

Virtual Reality Simulation for the Operating Room

PubMed Central

Gallagher, Anthony G.; Ritter, E Matt; Champion, Howard; Higgins, Gerald; Fried, Marvin P.; Moses, Gerald; Smith, C Daniel; Satava, Richard M.

2005-01-01

Summary Background Data: To inform surgeons about the practical issues to be considered for successful integration of virtual reality simulation into a surgical training program. The learning and practice of minimally invasive surgery (MIS) makes unique demands on surgical training programs. A decade ago Satava proposed virtual reality (VR) surgical simulation as a solution for this problem. Only recently have robust scientific studies supported that vision Methods: A review of the surgical education, human-factor, and psychology literature to identify important factors which will impinge on the successful integration of VR training into a surgical training program. Results: VR is more likely to be successful if it is systematically integrated into a well-thought-out education and training program which objectively assesses technical skills improvement proximate to the learning experience. Validated performance metrics should be relevant to the surgical task being trained but in general will require trainees to reach an objectively determined proficiency criterion, based on tightly defined metrics and perform at this level consistently. VR training is more likely to be successful if the training schedule takes place on an interval basis rather than massed into a short period of extensive practice. High-fidelity VR simulations will confer the greatest skills transfer to the in vivo surgical situation, but less expensive VR trainers will also lead to considerably improved skills generalizations. Conclusions: VR for improved performance of MIS is now a reality. However, VR is only a training tool that must be thoughtfully introduced into a surgical training curriculum for it to successfully improve surgical technical skills. PMID:15650649

Research on reform plan of civil engineering adult education graduation design

NASA Astrophysics Data System (ADS)

Su, Zhibin; Sun, Shengnan; Cui, Shicai

2017-12-01

As for civil engineering adult education graduation design, reform program is put forward combined with our school. The main points of reform include the following aspects. New pattern of graduation design which is consisted of basic training of engineering design, technical application and engineering innovation training is formed. Integration model of graduation design and employment is carried out. Multiple professional guidance graduation design pattern is put forward. Subject of graduation design is chosen based on the school actual circumstance. A “three stage” quality monitoring system is established. Performance evaluation pattern that concludes two oral examinations of the dissertation is strictly carried out.

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

National Profiles in Technical and Vocational Education in Asia and the Pacific: Japan.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Japan. The three parts of the document provide information about the geography and history of Japan, historical and current perspectives of general education, and technical and…

A Comparison of the Career and Technical Education Programs in a US Community College and a Chinese Institution

ERIC Educational Resources Information Center

Hou, Harry

2010-01-01

This research study explores and compares the career and technical education programs offered in a US community college and the vocational/career and technology education programs offered in a comparable Chinese postsecondary institution. The study sought to find positive transferable characteristics of the career and technical education programs…

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Nepal.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Nepal. The four parts of the document provide general information about the following: the country; the history, goals, and structure of the educational system; vocational technical and…

Career and Technical Education at a Crossroads: A Delphi Study

ERIC Educational Resources Information Center

Cutright, Michael W.

2011-01-01

Career and technical education in the United States has reached a critical juncture. A three round Delphi method was used to determine a consensus on the future events of career and technical education to better inform educational decision makers. Forty-one individual experts in the field were invited to serve as panelists for the Delphi study and…

The Impact of Secondary Career and Technical Education on Postsecondary Career and Educational Placement

ERIC Educational Resources Information Center

Moss, Roy Allen

2015-01-01

The purpose of this research was to provide evidence of the impact career and technical education courses have on students after graduation. Numbers of Career and Technical Education (CTE) completers have continually dropped at the participating schools for the past five years. Five categories of placement after graduation were studied including…

Training on women and renewable sources of energy.

PubMed

Duenas Loza, M

1997-01-01

The training package developed by the International Research and Training Institute for the Advancement of Women in 1989 focuses on women and energy. The Institute conducts training activities using collected, analyzed and disseminated information and documentation, as well as identification of critical research and training activities and promotion of integrated issues on women and energy policies, programs and projects. Previous training experiences identified the inefficient quality of training offered to community members, technical staff and technical agencies, with more emphasis on the technical skills instead on the managerial, socio-organizational and environmental aspects. The creation of a multimedia modular training material provides an association between the issues of women, New and Renewable Sources of Energy (NRSE) and environmental aspects necessary for the strengthening of national institutions, promotion of socioeconomical and technically feasible renewable technologies, and awareness building, information and communication enhancement. The package covers 1) overview of the UN activities on NRSE; 2) Women's Position in the Energy Sector; 3) NRSE Project and Program design and implementation; 4) relevant NRSE characteristics and technology systems; 5) education and training activities in NRSE projects. This training package is designed to contribute a new approach in the organization and management of NRSE through integration of women's needs and increase awareness and capabilities of planners, officials and experts. In addition, several training seminars were conducted during 1989-91, which focused on the relationship between women and renewable energy sources through the application of participatory and self-reliant techniques.

A practical description and student perspective of the integration of radiology into lower limb musculoskeletal anatomy.

PubMed

Davy, S; O'Keeffe, G W; Mahony, N; Phelan, N; Barry, D S

2017-05-01

Anatomy educators are increasing their utilisation of radiology in anatomy education in line with growing requirements for undergraduate radiology competency and clinical need. We aimed to evaluate student perceptions of radiology and to outline the technical and academic considerations underlying the integration of radiology into musculoskeletal practical anatomy sessions. The formal integration of radiology into anatomy practical sessions took place over a 5-week period during the lower limb musculoskeletal component of the anatomy course taught to first-year medical students. During practical sessions, students were required to rotate between aligned audio-visual radiology presentations, osteology/anatomical models, and prosection/dissection learning stations. After completing the course, students were invited to complete a survey to establish their opinions on radiology as a mode of learning and their satisfaction with radiological integration in anatomical practical sessions. Most students were not familiar with radiology prior to attending our university. All our students agreed or strongly agreed that learning to read radiographs in anatomy is important and most agreed that radiology is a valid assessment tool. Sixty percent stated that radiology facilitated their understanding of anatomy. The majority believed that radiology was best suited to clinically relevant anatomy and X-rays were their preferred learning tool. The practical approach to integrating radiology into undergraduate musculoskeletal anatomy described here did not place strain on existing academic resources. Most students agreed that radiology should be increased in anatomy education and that learning to understand radiographs in anatomy was important for clinical practice.

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM Dissemination of Program Results § 296.32 Technical and educational services. (a) Under...

Should Technical Education Be More Liberal?

ERIC Educational Resources Information Center

Heckman, Richard T.

Due to the increasing emphasis on technology and the trend toward downsizing and multiculturalism in today's workplace, graduates of technical education programs need non-technical thinking and problem solving skills to stay successfully employed. Historically, however, a dichotomy has existed between vocational and liberal education, which has…

5.3 Global challenges in research and strategic planning.

PubMed

Baum, Bruce J; Scott, John; Bickel, Matthias; Gombos, Giorgio; Greenspan, John S; Guo, Wei; Park, No-Hee; Purdell-Lewis, David; Ranney, Richard; Schwarz, Eli; Seymour, Greg; Uoshima, Katsumi

2002-01-01

Health sciences research is experiencing dramatic progress. How can dental schools throughout the world best make these research advances relevant for dental students, as well as providing them with the means to assess and utilize the research advances that will occur in the future? This complex question presents a critical challenge to the dental educational community. Research is clearly integral to the mission of dental education. By providing dental students with active learning strategies, dental educators can inculcate the ability for independent scientific thinking and thereby develop reflective as well as technically competent practitioners. However, there is a shortage of well-trained individuals to fill faculty and research positions in certain parts of the world. Global networks for mutual information exchange are imperative to overcome resource limitations in individual institutions, as is dedicated funding for research in the dental educational setting.

Medical Universities Educational and Research Online Services: Benchmarking Universities’ Website Towards E-Government

PubMed Central

Farzandipour, Mehrdad; Meidani, Zahra

2014-01-01

Background: Websites as one of the initial steps towards an e-government adoption do facilitate delivery of online and customer-oriented services. In this study we intended to investigate the role of the websites of medical universities in providing educational and research services following the E-government maturity model in the Iranian universities. Methods: This descriptive and cross- sectional study was conducted through content analysis and benchmarking the websites in 2012. The research population included the entire medical university website (37). Delivery of educational and research services through these university websites including information, interaction, transaction, and Integration were investigated using a checklist. The data were then analyzed by means of descriptive statistics and using SPSS software. Results: Level of educational and research services by websites of the medical universities type I and II was evaluated medium as 1.99 and 1.89, respectively. All the universities gained a mean score of 1 out of 3 in terms of integration of educational and research services. Conclusions: Results of the study indicated that Iranian universities have passed information and interaction stages, but they have not made much progress in transaction and integration stages. Failure to adapt to e-government in Iranian medical universities in which limiting factors such as users’ e-literacy, access to the internet and ICT infrastructure are not so crucial as in other organizations, suggest that e-government realization goes beyond technical challenges. PMID:25132713

Leadership Skills among Technical and Vocational Educators

ERIC Educational Resources Information Center

Zakaria, Nurazyan Zahidah; Jizat, Nor Atikah Md.; Zakaria, Normah

2015-01-01

The purpose of leadership skills among technical and vocational educator are to prepare them towards effective organization. Effective leadership is widely accepted as being a key constituent in achieving organization improvement and to examine. This study aimed to gauge the leadership skills among technical and vocational educators effectiveness…

Pacific Educational Computer Network Study. Final Report.

ERIC Educational Resources Information Center

Hawaii Univ., Honolulu. ALOHA System.

The Pacific Educational Computer Network Feasibility Study examined technical and non-technical aspects of the formation of an international Pacific Area computer network for higher education. The technical study covered the assessment of the feasibility of a packet-switched satellite and radio ground distribution network for data transmission…

Active learning in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

On the Rise: The Role of Career and Technical Education in Arizona's Future. 21st Century Career and Technical Education Pathways

ERIC Educational Resources Information Center

Gupta, Sapna

2013-01-01

This report examines the potential of Career and Technical Education (CTE) in Arizona in terms of providing employers certified skills need to compete regionally, nationally and internationally and students avenues for higher education, quality of life and job satisfaction. An appendix on "Estimating the Effect of CTE on High School…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Philippines.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in the Philippines. The two parts of the document provide an overview and milestones in technical and vocational education (through charts and tables). Some of the highlights are as…

A Quiet Revolution--International Influence, Domestic Elites and the Transformation of Higher Technical Education in Ireland 1959-72

ERIC Educational Resources Information Center

Walsh, John

2011-01-01

The upgrading of higher technical education which began in the 1960s marked the most influential intervention by the Irish government in the third-level sector since the establishment of the independent Irish state. A series of reforming initiatives extended educational opportunity and transformed the status of technical education at higher level.…

Career and Technical Education: States Have Broad Flexibility in Implementing Perkins IV. Report to Congressional Requesters. GAO-09-683

ERIC Educational Resources Information Center

Scott, George A.

2009-01-01

The Carl D. Perkins Career and Technical Education Act of 2006 (Perkins IV) supports career and technical education (CTE) in high schools and postsecondary institutions, such as community colleges. Perkins IV established student performance measures at the secondary and postsecondary levels for state agencies, such as state educational agencies,…

Roadmap to Perkins III: The Carl D. Perkins Vocational and Technical Education Act of 1998. A Guidebook for Illinois.

ERIC Educational Resources Information Center

Hess-Grabill, Donella; Bueno, Soyon

This guidebook is intended as a road map to the Carl D. Perkins Vocational Technical Education Act of 1998 (Perkins III) for career-technical education (CTE) practitioners and policymakers in Illinois. The following topics are among those covered: (1) framework for Perkins III (national educational reform, Illinois provisions for quality CTE,…

Curriculum Programs in Action, Their Administration and Evaluation; Report of a Conference Devoted to Description, Demonstration, and Evaluative Discussions of Innovative Programs in Vocational-Technical Education.

ERIC Educational Resources Information Center

San Francisco State Coll., CA. Center for Technological Education.

The presentation, review and evaluation of innovative vocational-technical curriculums in operation was the major function of a San Francisco conference sponsored jointly by the Center for Technical Education at San Francisco State College and the Center for Studies in Vocational and Technical Education at the University of Wisconsin. Major…

Integral Engine Inlet Particle Separator. Volume 2. Design Guide

DTIC Science & Technology

1975-08-01

herein will be used in the design of integral inlet particle separators for future Army aircraft gas turbine engines . Apprupriate technical personnel...OF INTEGRAL GAS TURBINE ENGINE SOLID PARTICLE INLET SEPARATORS, PHASE I, FEASIBILITY STUDY AND DESIGN, Pratt and Whitney Aircraft ; USAAVLABS Technical...USAAVLABS Technical Report 70-36, U.S. Army Aviation Materiel Laboratories, Fort Eustis, Virginia, August 1970 AD 876 584. 13. ENGINES , AIRCRAFT

Integration of educational and scientific-technological areas during the process of education of aerospace engineers

NASA Astrophysics Data System (ADS)

Mayorova, Vera

2011-09-01

National priorities, defined by modern state of high-tech industries, demand adequate problem solving of training professionals possessing required modern qualifications. Modern tendencies of the development of aerospace technologies, harsh competition in the market of space services and expansion of international cooperation for implementation of space projects, demand sharp increase of the scientific/technical level and competitiveness of the developed projects. Especially important is to be able to solve technological problems, which in turn define the cost and quality attributes of the designed item, as well as the ability to utilize the most modern design principles. Training of highly efficient, creative professionals who are capable of generating and implementing new ideas is a very important factor driving not only the development of national economy and industry, but also enriching the human capital of the country. Moscow State Technical University named after N.E. Bauman developed and successfully implemented the project-oriented technology of professional training for aerospace industry. It assumes a multitude of forms, methodologies and organizational events, which allow preparing the specialists - on the basis of integration of scientific/technological and educational environment - who are adapted to the conditions of the intellectual market. The Youth Space Center of the University is the base where graduate and post-graduate students attend unique lectures as a part of the facultative course "Applied Cosmonautics", participate in annual International Youth Science School "Space Development: Theory and Practice" and develop innovative technical projects aimed at creation of real-life space hardware. Microsatellite technologies are being developed in Bauman University through various projects, which are implemented in a coordinated manner by way of accomplishing the following steps: development of small-size satellites by universities, using them as test-beds for quick and affordable trial-and-test of new technologies and design solutions in aerospace followed by implementation of selected efficiencies in the industry; development and improvement of ground control infrastructure based in the university, which includes the Mission Control Center and the Earth Remote Sensing Center; development of cooperative partnerships with international partners in the field of microsatellite technologies with the goal of sharing experience, uniting efforts in preparing and running scientific and educational experiments and creating next-generation spacecraft by multi-national student groups. Such approaches allow creating seamless environment that unites educational, scientific and innovative processes. This allows students to develop high professionalism, modern engineering thinking and stable engineering skills at an early stage of education at the university.

15 CFR 295.11 - Technical and educational services for ATP recipients.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General § 295.11 Technical and educational services for ATP recipients... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services for...

Technical Colleges at a Crossroads.

ERIC Educational Resources Information Center

Selingo, Jeffrey

1999-01-01

Under pressure from governors and legislators to heighten academic rigor, technical colleges in several states are becoming part of higher education, whether they want to or not. With business leaders calling for better-educated workers, technical colleges are seen increasingly as stepping-stone institutions within higher education and key cogs in…

Research Needs: Career and Technical Education

ERIC Educational Resources Information Center

Kosloski, Michael F., Jr.; Ritz, John M.

2016-01-01

Research is an important component of each professional field. This study sought to determine topics that needed further research in the school subjects known as career and technical education. It determined topics that needed to be researched related to high school career and technical education (CTE) and the preparation for teaching CTE in…

Crossing the Chasm--Introducing Flexible Learning into the Botswana Technical Education Programme: From Policy to Action

ERIC Educational Resources Information Center

Richardson, Alison Mead

2009-01-01

This paper reports on a longitudinal, ethnomethodological case study of the development towards flexible delivery of the Botswana Technical Education Programme (BTEP), offered by Francistown College of Technical & Vocational Education (FCTVE). Data collection methods included documentary analysis, naturalistic participant observation, and…

A Sharper Focus on Technical Workers: How to Educate and Train for the Global Economy

ERIC Educational Resources Information Center

Lamos, Erin; Simon, Martin; Waits, Mary Jo

2010-01-01

This report presents a case study of the Automotive Manufacturing Technical Education Collaborative (AMTEC), which brings together auto manufacturers and community colleges across 12 states to identify and implement wide-ranging improvements in technical education for automotive manufacturing workers. A "Big Collaboration"--AMTEC…

Vocational-Technical Education: A Plan for Monroe County, Florida.

ERIC Educational Resources Information Center

Mills, Hugh L., Sr., Ed.; Pilcher, Palmer, C., Ed.

Suggested vocational-technical education programs for the Monroe County Florida school system are presented along with recommendations to implement the principle of coordinated career education in the public schools. Expansion of vocational-technical programs is emphasized to expose all students from kindergarten through Grade 12 to career…

Colonialism and Secondary Technical Education in Hong Kong: 1945-1997

ERIC Educational Resources Information Center

Lau, Wai Wah; Kan, Flora

2011-01-01

This study examines the influence of the colonial experience (1945-1997) on the planning of secondary technical education in Hong Kong. Specifically, the origins of secondary technical institutions and their positioning in secondary education are examined. Primary source materials are used as the basis of investigation and analysis, supplemented…

10 CFR 4.322 - Written notice, technical assistance, and educational materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Written notice, technical assistance, and educational... the Age Discrimination Act of 1975, as Amended Duties of Nrc Recipients § 4.322 Written notice, technical assistance, and educational materials. (a) NRC will provide written notice to each recipient of...

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

Annual Convention in St. Louis: A Dynamic Convergence

ERIC Educational Resources Information Center

Emeagwali, N. Susan

2012-01-01

Nearly 3,000 career and technical educators from across the country converged upon St. Louis, Missouri, for the premier professional development event in career and technical education (CTE). The Association for Career and Technical Education (ACTE) held its Annual Convention and Career Tech Expo November 17-19, bringing together teachers,…

Individualizing Instruction in Vocational and Technical Education.

ERIC Educational Resources Information Center

Nee, John G.

On the premise that individualized instruction and its many variations has become increasingly more important to the vocational and technical educator, various aspects of an individualized instructional program are discussed under eight headings: (1) What Is Meant by Individualizing Instruction in Vocational and Technical Education? (2) Why Do We…

The Changing Nature of Technical Assistance.

ERIC Educational Resources Information Center

Noggle, Nelson L.

The changing nature of technical assistance activities and evaluation for compensatory education programs was discussed. The emphasis is on the Education Consolidation and Improvement Act (ECIA) Chapter 1 Technical Assistance Centers (TAC) and their clients. Improvement of school practices demands that the technical assistance process be developed…

Examining Educators' and Employers' Perceptions on Career and Technical Education Graduates' Employability Skills for the Labor Market in Jordan

ERIC Educational Resources Information Center

Al-Alawneh, Muhammad Khaled

2009-01-01

Preparing skilled and knowledgeable workforce that fits the labor market requires continued collaboration between education and work. Studying educators' and employers' perspectives on technical and non-technical skills may result in improving the quality of the graduates to compete on the level of the local as well as the global labor market.…

An Evaluation of the Science Education Component of the Cross River State Science and Technical Education Project

ERIC Educational Resources Information Center

Ekuri, Emmanuel Etta

2012-01-01

The Cross River State Science and Technical Education Project was introduced in 1992 by edict number 9 of 20 December 1991, "Cross River State Science and Technical Education Board Edit, 20 December, 1991", with the aim of improving the quality of science teaching and learning in the state. As the success of the project depends…

A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Northeast Region

ERIC Educational Resources Information Center

CNA Corporation, 2005

2005-01-01

The Northeast Regional Advisory Committee (NE RAC) provides an assessment of the technical assistance needs of educators in the Northeast Region in response to a directive from the Secretary of the U.S. Department of Education (ED). The Secretary will use this assessment in establishing 20 comprehensive centers to provide technical assistance to…

The Challenge of the Future. Future Trends in Adult and Continuing Technical and Vocational Education. An International Symposium (Berlin, Germany, October 16-20, 1995).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Hamburg (Germany). Inst. for Education.

This report on an international symposium on the strengthening of the development and improvement of vocational education begins with a description of UNEVOC, the International Project on Technical and Vocational Education. Section 2 presents discussions of the following topics: adult and continuing technical and vocational education and its…

Why Schools Do Not Release ASVAB Scores to Military Recruiters

DTIC Science & Technology

2012-06-08

Career and Technical Education DoD Department of Defense FERPA Family Education Records Protection Act GA Grad...incorporated the CEP. Since the adaptation of career clusters in Career and Technical Education (CTE), a venture funded by the states and the federal...available from career and technical education websites. The ASVAB CEP website provides the ASVAB CEP Fact Sheet and Overview of the ASVAB CEP.

U.S. Air Force Enlisted Accessions: Upgrading the Pipeline

DTIC Science & Technology

2010-02-17

of State Boards of Education (NASBE) and the Association for Career and Technical Education (ACTE). Specific collaboration efforts include improving...Accessions Command and the Association for Career and Technical Education . November 20, 2009. http://dev.armyedspace.com/news-updates/news...Understanding Between the U.S. Army Accessions Command and the Association for Career and Technical Education . November 20, 2009. http://dev.armyedspace.com

Remaking Career and Technical Education for the 21st Century: What Role for High School Programs?

ERIC Educational Resources Information Center

Kazis, Richard

2005-01-01

As part of the broader policy debate on how to reform K-12 education, particularly high schools, basic questions about career and technical education are on the table. "Remaking Career and Technical Education for the 21st Century" begins with a summary of what researchers know--and do not know--about the value of high school…

Information Technologies (ITs) in Medical Education

PubMed Central

Masic, Izet; Pandza, Haris; Toromanovic, Selim; Masic, Fedja; Sivic, Suad; Zunic, Lejla; Masic, Zlatan

2011-01-01

Advances in medicine in recent decades are in significant correlation with the advances in the information technology. Modern information technologies (IT) have enabled faster, more reliable and comprehensive data collection. These technologies have started to create a large number of irrelevant information, which represents a limiting factor and a real growing gap, between the medical knowledge on one hand, and the ability of doctors to follow its growth on the other. Furthermore, in our environment, the term technology is generally reserved for its technical component. Education means, learning, teaching, or the process of acquiring skills or behavior modification through various exercises. Traditionally, medical education meant the oral, practical and more passive transferring of knowledge and skills from the educators to students and health professionals. For the clinical disciplines, of special importance are the principles, such as, “learning at bedside,” aided by the medical literature. In doing so, these techniques enable students to contact with their teachers, and to refer to the appropriate literature. The disadvantage of these educational methods is in the fact, that teachers often do not have enough time. Additionally they are not very convenient to the horizontal and vertical integration of teaching, create weak or almost no self education, as well as, low skill levels and poor integration of education with a real social environment. In this paper authors describe application of modern IT in medical education – their advantages and disadvantages comparing with traditional ways of education. PMID:23408471

The importance of teaching communication in dental education. A survey amongst dentists, students and patients.

PubMed

Woelber, J P; Deimling, D; Langenbach, D; Ratka-Krüger, P

2012-02-01

The aim of our study was to evaluate the subjective importance of teaching communication in the dental curriculum by conducting a survey amongst dentists, students and patients. Three questionnaires about communication-related issues were developed in which different questions could be rated on a five-point Likert scale. These questions included the subjective importance of the dental team's friendliness, an elaborated consultation, modern office equipment or the dentist's technical skills. Seven hundred and twenty-nine questionnaires were completed [233 by dentists (32%), 310 by students (43%) and 185 by patients (25%)]. Eighty-seven percentage of the dentists, 84% of the students and 84% of the patients supported an integration of communicational issues in dental education; 94.7% of the dentists and 77.2% of the patients attached vital importance to the dentist-patient relationship regarding the therapeutic outcomes. Dentists with prior communicational training experience would spend significantly (P<0.001) more money for further courses. The results show the publicly perceived importance of integrating aspects of communication in dental education. © 2011 John Wiley & Sons A/S.

Cryosphere Science Outreach using the NASA/JPL Virtual Earth System Laboratory

NASA Astrophysics Data System (ADS)

Larour, E. Y.; Cheng, D. L. C.; Quinn, J.; Halkides, D. J.; Perez, G. L.

2016-12-01

Understanding the role of Cryosphere Science within the larger context of Sea Level Rise is both a technical and educational challenge that needs to be addressed if the public at large is to truly understand the implications and consequences of Climate Change. Within this context, we propose a new approach in which scientific tools are used directly inside a mobile/website platform geared towards Education/Outreach. Here, we apply this approach by using the Ice Sheet System Model, a state of the art Cryosphere model developed at NASA, and integrated within a Virtual Earth System Laboratory, with the goal to outreach Cryosphere science to K-12 and College level students. The approach mixes laboratory experiments, interactive classes/lessons on a website, and a simplified interface to a full-fledged instance of ISSM to validate the classes/lessons. This novel approach leverages new insights from the Outreach/Educational community and the interest of new generations in web based technologies and simulation tools, all of it delivered in a seamlessly integrated web platform, relying on a state of the art climate model and live simulations.

An Injury Prevention Strategy for Teen Restaurant Workers

PubMed Central

Ward, Julie A.; de Castro, A. B.; Tsai, Jenny Hsin-Chun; Linker, Darren; Hildahl, Lyle; Miller, Mary E.

2011-01-01

High levels of youth employment, workplace hazards, and characteristics unique to adolescents contribute to a relatively high incidence of injuries among teens in the restaurant industry. This article discusses the ProSafety model of injury prevention among teen restaurant workers. Through integration with an existing career and technical education program, the ProSafety project seeks to prevent occupational injuries among the teen worker population through classroom safety education and internship skills reinforcement. ProSafety is the product of an innovative collaboration with occupational health nurses, business professionals, educators, and government. Its approach is derived from Social Cognitive Theory, is consistent with key values and strategies of occupational health nurses, and provides lessons for practitioners seeking to reduce occupational injuries in food service or among other populations of adolescent workers. PMID:20180503

An injury prevention strategy for teen restaurant workers. Washington State's ProSafety project.

PubMed

Ward, Julie A; de Castro, A B; Tsai, Jenny Hsin-Chun; Linker, Darren; Hildahl, Lyle; Miller, Mary E

2010-02-01

High levels of youth employment, workplace hazards, and characteristics unique to adolescents contribute to a relatively high incidence of injuries among teens in the restaurant industry. This article discusses the ProSafety model of injury prevention among teen restaurant workers. Through integration with an existing career and technical education program, the ProSafety project seeks to prevent occupational injuries among the teen worker population through classroom safety education and internship skills reinforcement. ProSafety is the product of an innovative collaboration with occupational health nurses, business professionals, educators, and government. Its approach is derived from Social Cognitive Theory, is consistent with key values and strategies of occupational health nurses, and provides lessons for practitioners seeking to reduce occupational injuries in food service or among other populations of adolescent workers.

Education Industry, 2006

DTIC Science & Technology

2006-01-01

resulted in the U.S. Department of Education referring to it as Career and Technical Education (CTE). Minuteman High School, a highly successful...whole, and ultimately the students and the nation, will suffer the consequences. 7 Vocational Education The challenge for Career and Technical Education (CTE

Development and implementation of a clinical pathway approach to simulation-based training for foregut surgery

PubMed Central

Miyasaka, Kiyoyuki W; Buchholz, Joseph; LaMarra, Denise; Karakousis, Giorgos C; Aggarwal, Rajesh

2015-01-01

Introduction Contemporary demands on resident education call for integration of simulation. We designed and implemented a simulation-based curriculum for PGY1 surgery residents to teach technical and non-technical skills within a clinical pathway approach for a foregut surgical patient, from outpatient visit through surgery and post-op follow-up. Methods The three-day curriculum for groups of six residents comprises a combination of standardized patient (SP) encounters, didactic sessions, and hands-on training. The curriculum is underpinned by a summative simulation “pathway” repeated on days 1 and 3. The “pathway” is a series of simulated pre-op, intra-op, and post-op encounters following a single patient through a disease process. The resident sees an SP in clinic presenting with distal gastric cancer, then enters an operating room to perform a gastro-jejunostomy on a porcine tissue model. Finally, the resident engages in a simulated post-operative visit. All encounters are rated by faculty members and the residents themselves, using standardized assessment forms endorsed by the American Board of Surgery. Results 18 first-year residents underwent this curriculum. Faculty ratings of overall operative performance significantly improved following the three-day module. Ratings of preoperative and postoperative performance were not significantly changed in three days. Resident self-ratings significantly improved for all encounters assessed, as did reported confidence in meeting defined learning objectives. Conclusions Conventional surgical simulation training focuses on technical skills in isolation. Our novel “pathway” curriculum targets an important gap in training methodologies by placing both technical and non-technical skills in their clinical context as part of managing a surgical patient. Results indicate consistent improvements in assessments of performance as well as confidence and support its continued usage to educate surgery residents in foregut surgery. PMID:25869238

Evaluating the influence of goal setting on intravenous catheterization skill acquisition and transfer in a hybrid simulation training context.

PubMed

Brydges, Ryan; Mallette, Claire; Pollex, Heather; Carnahan, Heather; Dubrowski, Adam

2012-08-01

Educators often simplify complex tasks by setting learning objectives that focus trainees on isolated skills rather than the holistic task. We designed 2 sets of learning objectives for intravenous catheterization using goal setting theory. We hypothesized that setting holistic goals related to technical, cognitive, and communication skills would result in superior holistic performance, whereas setting isolated goals related to technical skills would result in superior technical performance. We randomly assigned practicing health care professionals to set holistic (n = 14) or isolated (n = 15) goals. All watched an instructional video and studied a list of 9 goals specific to their group. Participants practiced independently in a hybrid simulation (standardized patient combined with an arm simulator). The first and the last practice trials were videotaped for analysis. One-week later, participants completed a transfer test in another hybrid simulation scenario. Blinded experts evaluated performance on all 3 trials using the Direct Observation of Procedural Skills tool. The holistic group scored higher than the isolated group on the holistic Direct Observation of Procedural Skills score for all 3 trials [mean (SD), 45.0 (9.16) vs. 38.4 (9.17); P = 0.01]. The isolated group did not perform better than the holistic group on the technical skills score [10.3 (2.73) vs. 11.6 (3.01); P = 0.11]. Our results suggest that asking learners to set holistic goals did not interfere with their attaining competent holistic and technical skills during hybrid simulation training. This exploratory trial provides preliminary evidence for how to consider integrating hybrid simulation into medical curricula and for the design of learning goals in simulation-based education.

Career Technical Education Pathways Initiative Annual Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2014

2014-01-01

California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (the Initiative) became law in 2005 with Senate Bills 70 and 1133 and provided more than $380 million over eight years to improve career technical education…

Consortia Formation and Characteristics under the "Carl D. Perkins Career and Technical Education Act of 2006"

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steve

2014-01-01

The "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV") sets a minimum allocation requirement that secondary and postsecondary career and technical education (CTE) subgrantees must achieve to receive federal financing. An eligible recipient with an allocation below the funding threshold may obtain a…

National Centers for Career and Technical Education Annual Report, 2000.

ERIC Educational Resources Information Center

National Dissemination Center for Career and Technical Education, Columbus, OH.

The National Research Center for Career and Technical Education and the National Dissemination Center for Career and Technical Education were established at the University of Minnesota and The Ohio State University, respectively, in 1999. The centers operate as a consortium with primary and associate partners. Through the centers, the partners…

Education, Technical Progress, and Economic Growth: The Case of Taiwan.

ERIC Educational Resources Information Center

Lin, T.-C.

2003-01-01

Investigates the effect of education and the role of technical progress on economic growth in Taiwan from 1965-2000. Finds that education has a positive and significant effect on growth, but the role of technical progress does not appear to be extraordinarily important. Furthermore, no markedly significant relationships exist between capital and…

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

Emphasis: Technical Education. Conference Report (St. Louis, Mo., May 12-14, 1966).

ERIC Educational Resources Information Center

American Association of Junior Colleges, Washington, DC.

The purpose of this conference was to bring expertise in the field of technical education to bear upon the identification and resolution of problems inhibiting the expansion of programs at the junior college level. Sixty-four participants were involved. The conference focused upon the relationships of technical education to: society, college…

Florida Study of Career and Technical Education. Final Report

ERIC Educational Resources Information Center

Jacobson, Louis; Mokher, Christine

2014-01-01

A key goal of the "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV") is to ensure career and technical education (CTE) programs are widely available for preparing high school and college students for "high skill, high wage, or high demand occupations in current or emerging professions"…

State Strategies for Financing Career and Technical Education

ERIC Educational Resources Information Center

Foster, Laura Rasmussen; Klein, Steve; Elliott, Barbara

2014-01-01

The "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV" or "Act") authorizes federal funding for career and technical education (CTE) and specifies a formula for distributing those funds. Allocations at the secondary level are based on the number of youths ages 5-17 who reside within a local…

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

New Desktop Virtual Reality Technology in Technical Education

ERIC Educational Resources Information Center

Ausburn, Lynna J.; Ausburn, Floyd B.

2008-01-01

Virtual reality (VR) that immerses users in a 3D environment through use of headwear, body suits, and data gloves has demonstrated effectiveness in technical and professional education. Immersive VR is highly engaging and appealing to technically skilled young Net Generation learners. However, technical difficulty and very high costs have kept…

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

34 CFR 300.702 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance. 300.702 Section 300.702 Education..., and Use of Funds § 300.702 Technical assistance. (a) In general. The Secretary may reserve not more... to support technical assistance activities authorized under section 616(i) of the Act. (b) Maximum...

Integration of an expert teaching assistant with distance learning software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fonseca, S.P.; Reed, N.E.

1996-12-31

The Remote Teaching Assistant (RTA) software currently under development at UC Davis allows students and Teaching Assistants (TA`s) to interact through multimedia communication via the Internet. To resolve the problem of TA unavailability and limited knowledge, an Expert Teaching Assistant (ETA) module is being developed. When TA`s are not on-line, students in need of help consult ETA. The focus of this research is the development and integration of ETA with RTA, the establishment of an architecture suitable for use with education (the domain) in any sub-domain (course), and the creation of a mechanism usable by non-technical personnel to maintain knowledgemore » bases.« less

Nursing practice in home care: an integrative literature review.

PubMed

Andrade, Angélica Mônica; Silva, Kênia Lara; Seixas, Clarissa Terenzi; Braga, Patrícia Pinto

2017-01-01

analyze scientific production on nursing practice in home care. integrative review employing databases LILACS, BDENF, IBECS, and MEDLINE. Studies in Spanish, English, and Portuguese were included, regardless of publishing date. after analyzing 48 articles, it was found that nursing practice in home care is complex, employing a multitude of actions by using three technologies: soft; soft-hard especially; and hard. Challenges related to the home-care training process are reported in the literature. Nurses use knowledge from their experience and scientific recommendations in conjunction with their reflections on the practice. home nursing practice is fundamental and widespread. Relational and educational actions stand out as necessary even in technical care, with a predominant need for home-care training.

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

Vocational technical and adult education: Status, trends and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1973-01-01

Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

Non-advanced Further Education.

ERIC Educational Resources Information Center

Alsop, M.

1986-01-01

Traces the history of post-secondary technical education (referred to as "further education") in the United Kingdom. Considers its present position in relation to other branches of the education system. Outlines some recent initiatives which have produced the present structure and content of technical education. (TW)

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false How may a State provide technical assistance? 403.187 Section 403.187 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION...

Internet protocol television for personalized home-based health information: design-based research on a diabetes education system.

PubMed

Gray, Kathleen Mary; Clarke, Ken; Alzougool, Basil; Hines, Carolyn; Tidhar, Gil; Frukhtman, Feodor

2014-03-10

The use of Internet protocol television (IPTV) as a channel for consumer health information is a relatively under-explored area of medical Internet research. IPTV may afford new opportunities for health care service providers to provide health information and for consumers, patients, and caretakers to access health information. The technologies of Web 2.0 add a new and even less explored dimension to IPTV's potential. Our research explored an application of Web 2.0 integrated with IPTV for personalized home-based health information in diabetes education, particularly for people with diabetes who are not strong computer and Internet users, and thus may miss out on Web-based resources. We wanted to establish whether this system could enable diabetes educators to deliver personalized health information directly to people with diabetes in their homes; and whether this system could encourage people with diabetes who make little use of Web-based health information to build their health literacy via the interface of a home television screen and remote control. This project was undertaken as design-based research in two stages. Stage 1 comprised a feasibility study into the technical work required to integrate an existing Web 2.0 platform with an existing IPTV system, populated with content and implemented for user trials in a laboratory setting. Stage 2 comprised an evaluation of the system by consumers and providers of diabetes information. The project succeeded in developing a Web 2.0 IPTV system for people with diabetes and low literacies and their diabetes educators. The performance of the system in the laboratory setting gave them the confidence to engage seriously in thinking about the actual and potential features and benefits of a more widely-implemented system. In their feedback they pointed out a range of critical usability and usefulness issues related to Web 2.0 affordances and learning fundamentals. They also described their experiences with the system in terms that bode well for its educational potential, and they suggested many constructive improvements to the system. The integration of Web 2.0 and IPTV merits further technical development, business modeling, and health services and health outcomes research, as a solution to extend the reach and scale of home-based health care.

Authentic Astronomical Discovery in Planetariums: Bringing Data to Domes

NASA Astrophysics Data System (ADS)

Wyatt, Ryan Jason; Subbarao, Mark; Christensen, Lars; Emmons, Ben; Hurt, Robert

2018-01-01

Planetariums offer a unique opportunity to disseminate astronomical discoveries using data visualization at all levels of complexity: the technical infrastructure to display data and a sizeable cohort of enthusiastic educators to interpret results. “Data to Dome” is an initiative the International Planetarium Society to develop our community’s capacity to integrate data in fulldome planetarium systems—including via open source software platforms such as WorldWide Telescope and OpenSpace. We are cultivating a network of planetarium professionals who integrate data into their presentations and share their content with others. Furthermore, we propose to shorten the delay between discovery and dissemination in planetariums. Currently, the “latest science” is often presented days or weeks after discoveries are announced, and we can shorten this to hours or even minutes. The Data2Dome (D2D) initiative, led by the European Southern Observatory, proposes technical infrastructure and data standards that will streamline content flow from research institutions to planetariums, offering audiences a unique opportunity to access to the latest astronomical data in near real time.

Foundations for value education in engineering: the Indian experience.

PubMed

Gupta, Amitabha

2015-04-01

The objective of this paper is to discuss some of the foundational issues centering around the question of integrating education in human values with professional engineering education: its necessity and justification. The paper looks at the efforts in 'tuning' the technical education system in India to the national goals in the various phases of curriculum development. The contribution of the engineering profession in national development and India's self-sufficiency is crucially linked with the institutionalization of expertise and the role of morality and responsibility. This linkage can be created through a proper understanding of the social role of the profession-what motivates the professionals and what makes professional life meaningful. Value education facilitates the process of moral maturity and the development of a 'holistic' mindset. This paper deals with the need to create such a mindset, the human values associated with it and gives examples of efforts to impart such education through 'action-oriented' programmes introduced in some institutes of engineering in India.

Mission EarthFusing GLOBE with NASA Assets to Build SystemicInnovation in STEM Education

NASA Astrophysics Data System (ADS)

Czajkowski, K. P.; Garik, P.; Padgett, D.; Darche, S.; Struble, J.; Adaktilou, N.

2016-12-01

Mission Earth is a project funded through the NASA CAN that is developing a systematic embedding of NASA assets that is being implemented by a partnership of organizations across the US. Mission Earth brings together scientists and science educators to develop a K-12 "Earth as a system" curriculum progression following research-based best practices. GLOBE and NASA assets will be infused into the curricula of schools along the K-12 continuum, leveraging existing partnerships and networks and supported through state departments of education and targeting underrepresented groups, as a systemic, effective, and sustainable approach to meeting NASA's science education objectives. This presentation will discuss plans for the Mission Earth project and successes and lessons learned in the first year. Mission Earth is developing curricular materials to support vertically integrated learning progressions. It develops models of professional development utilizing sustainable infrastructures. It will support STEM careers focusing on career technical education (CTE). And, it will engage undergraduate education majors through pre-service courses and engineering students through engineering challenges.

Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

ERIC Educational Resources Information Center

Marsella, Anthony J.

2010-01-01

The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

Writing Performance Goals: Strategy and Prototypes. A Manual for Vocational and Technical Educators.

ERIC Educational Resources Information Center

McGraw-Hill Book Co., New York, NY. Gregg Div.

The result of a cooperative project of the Center for Vocational and Technical Education at the Ohio State University and the McGraw-Hill Book Company, this manual was prepared to develop prototypes of performance goals for use by curriculum specialists and developers of instructional materials in vocational and technical education and to provide…

34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are... 34 Education 2 2011-07-01 2010-07-01 true What agencies are eligible for assistance to provide training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the...

34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial... 34 Education 2 2011-07-01 2010-07-01 true What financial assistance does the Secretary provide for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of the...

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

ERIC Educational Resources Information Center

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

Treatment of Race/Ethnicity in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Xing, Xue

2013-01-01

This study examined how researchers of career-technical education have treated the construct of race/ethnicity in recent studies. Fifty-one of 71 articles published in the Career and Technical Education Research (CTER) over a 7-year span (2005-2011) were included. A content analysis found that only one quarter (n = 13, 25.49%) of eligible studies…

Methodology for Planning Technical Education: With a Case Study of Polytechnics in Bangladesh.

ERIC Educational Resources Information Center

Ritzen, Jozef M.; Balderston, Judith B.

A product of research first begun by one of the authors in Bangladesh, this book develops a comprehensive set of methods for planning technical education. Wherever possible, the authors draw on existing tools, fitting them to the specific context of technical education. When faced with planning problems for which existing methods are ill suited…

Preparing Research and Development Proposals for Vocational-Technical Education. Research Series No. 40.

ERIC Educational Resources Information Center

Lamberth, Edwin E.

The purpose of this handbook is to present in a simple form the processes and procedures involved in preparing research and development projects in vocational-technical education in the State of Tennessee. It was prepared in conjunction with the Research Coordinating Unit (RCU) and the division of Vocational-Technical Education, State Department…

Technical and Vocational Education Transformation in Malaysia: Shaping the Future Leaders

ERIC Educational Resources Information Center

Sauffie, Nur Fatin Binti Mohd

2015-01-01

In accordance with the concept of lifelong education, the Technical and Vocational Education (TVE) system is one flaw of that is recognized or known as a system whose role is to develop individuals with high technical skills as desired by the industry nowadays. Changing times and technology development at this time require changes to the TVET…

Career and Technical Education in the Crossroads of Change

ERIC Educational Resources Information Center

Quailey, Janice

2012-01-01

Career and technical education (CTE) is faced with numerous forces that may impact its future. A variety of forces directly or indirectly affect CTE, ranging from the persisting stigma or negative image of career and technical education, the schools' curricular structure and requirements, along with federal laws such as No Child Left Behind (NCLB)…

Exploring Embedded Remediation for Community College Career Technical Education Pathways: Promising Practices

ERIC Educational Resources Information Center

Cooper, Donna Walters

2014-01-01

Public community colleges enroll nearly half of all undergraduate students in the United States and many of these students are enrolled in 1- and 2-year Career and Technical Education programs. Employers have indicated that colleges should place more emphasis on reading, writing, and critical thinking skills. Career Technical Education can address…

An Intensive Onsite Technical Assistance Model to Promote Inclusive Educational Practices for Students with Disabilities in Middle School and High School

ERIC Educational Resources Information Center

Clark, Nitasha M.; Cushing, Lisa S.; Kennedy, Craig H.

2004-01-01

The authors examined the effects of an intensive onsite technical assistance (IOTA) model on the inclusive practices of special educators. Three special educators received technical assistance that included performance assessments, workshops on inclusive practices, and intensive onsite follow-up support. Inclusive practices were measured using…

Toward the 21st Century: Preparing Strategic Thinkers in Vocational, Technical, and Occupational Education for Building Learning Communities.

ERIC Educational Resources Information Center

Groff, Warren H.

The 1992 component of Emergence of Vocational, Technical, and Occupational Education (E-VTO) focused on preparing strategic thinkers in vocational, technical, and occupational education (VTO) for building learning communities. The E-VTO seminar was one of the two seminars that comprised the VTO specialization of Nova University's doctoral program…

Repositioning Technical and Vocational Education and Training (TVET) for Youths Employment and National Security in Nigeria

ERIC Educational Resources Information Center

Ogbunaya, T. C.; Udoudo, Ekereobong S.

2015-01-01

The paper focused on repositioning Technical and Vocational Education and Training (TVET) for youth's employment and national security in Nigeria. It examined briefly the concepts of technical vocational education and training (TVET), youths, unemployment and national security as well as the effects of unemployment on national security in Nigeria.…

Simulated lumbar minimally invasive surgery educational model with didactic and technical components.

PubMed

Chitale, Rohan; Ghobrial, George M; Lobel, Darlene; Harrop, James

2013-10-01

The learning and development of technical skills are paramount for neurosurgical trainees. External influences and a need for maximizing efficiency and proficiency have encouraged advancements in simulator-based learning models. To confirm the importance of establishing an educational curriculum for teaching minimally invasive techniques of pedicle screw placement using a computer-enhanced physical model of percutaneous pedicle screw placement with simultaneous didactic and technical components. A 2-hour educational curriculum was created to educate neurosurgical residents on anatomy, pathophysiology, and technical aspects associated with image-guided pedicle screw placement. Predidactic and postdidactic practical and written scores were analyzed and compared. Scores were calculated for each participant on the basis of the optimal pedicle screw starting point and trajectory for both fluoroscopy and computed tomographic navigation. Eight trainees participated in this module. Average mean scores on the written didactic test improved from 78% to 100%. The technical component scores for fluoroscopic guidance improved from 58.8 to 52.9. Technical score for computed tomography-navigated guidance also improved from 28.3 to 26.6. Didactic and technical quantitative scores with a simulator-based educational curriculum improved objectively measured resident performance. A minimally invasive spine simulation model and curriculum may serve a valuable function in the education of neurosurgical residents and outcomes for patients.

Investigating Employability: A Study to Ascertain Whether Attaining Stackable Credentials Increases Opportunity for Employment for Career Technical Graduates

ERIC Educational Resources Information Center

Whittington, Amy Green

2017-01-01

Career technical education plays an important part in the mission of community colleges--providing educational opportunities needed by members of their communities. Career technical programs prepare students for entry into the workforce. Accountability standards for career technical programs, from local, state, and federal bodies, monitor…

34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are eligible for assistance to provide training and technical assistance? Entities that have experience in the...

34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of..., DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial assistance does the Secretary provide for training and technical assistance? (a) From funds, if...

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

Matching Community and Technical College Professional/Technical Education Capacity to Employer Demand. Final Report.

ERIC Educational Resources Information Center

Sommers, Paul; Heg, Deena

A project was conducted to improve the state of Washington's community and technical college system by developing and using an improved occupational forecasting system to assess and respond to education and training needs. First, long-term occupational forecast data from Washington's Employment Security Department were matched with technical and…

34 CFR 412.5 - What regulations apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF EDUCATION NATIONAL NETWORK FOR CURRICULUM COORDINATION IN VOCATIONAL AND TECHNICAL EDUCATION... Curriculum Coordination in Vocational and Technical Education: (a) The regulations in this part 412. (b) The...

Secrets of the Sediments: Using ANDRILL's Scientific Adventure on Ice to Transfer Climate Change Science to K-12 Audiences

NASA Astrophysics Data System (ADS)

Huffman, L. T.; Dahlman, L.; Frisch-Gleason, R.; Harwood, D.; Pound, K.; Rack, F.; Riesselman, C.; Trummel, E.; Tuzzi, E.; Winter, D.

2008-12-01

Antarctica's harsh environment and the compelling story of living and working there, provides the backdrop for hooking the interest of young learners on science research and the nature of science. By using the adventure stories of today's researcher-explorers, teachers accompanying the ANDRILL team have taken the technical science of drilling rock cores to understand the history of climate change and the advance and retreat of the Antarctic ice sheet, and translated it for non-technical audiences from K-12 school children, to adult community groups. In order to understand the important issues surrounding global climate change, members of the public need access to accurate and relevant information, high quality educational materials, and a variety of learning opportunities in different learning environments. By taking lessons learned from early virtual polar adventure learning expeditions like Will Steger's Trans-Antarctic Expedition, coupled with educators-in-the-field programs like TEA (Teachers Experiencing Antarctica and the Arctic), ARMADA and Polar Trec, ANDRILL's Education and Outreach Program has evolved into successful and far-reaching integrated education projects including 1) the ARISE (ANDRILL Research Immersion for Science Educators) Program, 2) Climate Change Student Summits, 3) the development of Flexhibit (flexible exhibit) teaching resources, 4) virtual online learning communities, and 5) partnering young researchers with teachers and classrooms. Formal evaluations indicate lasting interest in science studies on the part of students and an increase in teachers' scientific background knowledge.

Teaching health assessment in the virtual classroom.

PubMed

Lashley, Mary

2005-08-01

Health assessment skills are vital to professional nursing practice. Health assessment has traditionally been taught using lecture, teacher-developed tests, practice and live demonstration, and interactive and computer-based learning materials. Rapid advances in information technology during the past decade have greatly expanded distance learning options in higher education. Although much nursing education now uses the Internet, there has been limited use of the Web to teach psychomotor and clinical skills. This article describes how online instruction can be integrated into a health assessment course to teach physical examination skills. The development of instructional videos that can be digitally streamed onto the Web for ready and repeated access can also enhance online learning of technical and clinical skills. Student evaluation of this Web-enhanced course revealed that online assignments enabled them to pace their learning, thereby promoting greater flexibility and independence. Students were able to master the technical skills of working online with minimal difficulty and reported that working online was no more stressful than attending class. The most helpful aspect of the online course was the instructor-developed video that was digitally streamed online.

Tipping Points and Balancing Acts: Grand Challenges and Synergistic Opportunities of Integrating Research and Education, Science and Solutions

NASA Astrophysics Data System (ADS)

McCaffrey, M. S.; Stroeve, J. C.

2011-12-01

The "Grand Challenges" to address Global Change identified by the International Council for Science (ICSU) and its partners through the Earth System Sustainability Initiative-improving forecasting, enhancing and integrating observation systems, confining and minimizing global environmental change, responding effectively to change, as well as innovating and evaluating these efforts-require an integrative approach that engages and inspires society in general and young people in particular. What are some of the effective strategies-and stumbling blocks-in being able to make Earth System science and related sustainability efforts relevant and practical to non-technical audiences? Recent climate education projects have pioneered new strategies toward linking and infusing research with education, science with solutions. For example, the Climate Literacy and Energy Awareness Network (CLEAN), a National Science Digital Library Pathway funded by NSF, has approached this integral approach by "closing the loop" between climate and energy topics, identifying and annotating high quality online resources relating to the carbon cycle and related topics. The Inspiring Climate Education Excellence (ICEE) project, funded by NASA, offers professional development for teachers that infuses climate science with solutions as an emerging "best practice" while being sensitive to the emotional, psychological and political aspects of avoiding "gloom and doom" on one hand or advocating for particular policy solutions on another. Other examples includes NASA's climate website (http://climate.nasa.gov ), which serves as a robust, engaging portal for climate research and data, especially for educators. The recent PBS series Earth: The Operators' Manual and related book and website are other recent example of how climate science research, education and solutions can be incorporated in a way that is appealing and informative. The Alliance for Climate Education (ACE) has given assemblies in thousands of US high schools that integrate climate science and solutions in a way that inspires and informs youth, and similar programs exist internationally. Other approaches to prepare vulnerable communities, especially young people, for natural hazards and human-induced environmental change include programs such as Plan International's "Child Centered Disaster Risk Reduction- Building Resilience Through Participation," and their "Weathering the Storm" project, focusing on integrating the needs of teenage girls with climate change adaptation and risk reduction. While minimizing global environmental and climate change is crucial, these and related programs that weave research with education, science with solutions offer the potential for addressing the "Grand Challenges" by better preparing for societal and environmental tipping points through a more balanced and integrated approach to addressing change."

Simulation-Based e-Learning Tools for Science,Engineering, and Technology Education(SimBeLT)

NASA Astrophysics Data System (ADS)

Davis, Doyle V.; Cherner, Y.

2006-12-01

The focus of Project SimBeLT is the research, development, testing, and dissemination of a new type of simulation-based integrated e-learning set of modules for two-year college technical and engineering curricula in the areas of thermodynamics, fluid physics, and fiber optics that can also be used in secondary schools and four-year colleges. A collection of sophisticated virtual labs is the core component of the SimBeLT modules. These labs will be designed to enhance the understanding of technical concepts and underlying fundamental principles of these topics, as well as to master certain performance based skills online. SimBeLT software will help educators to meet the National Science Education Standard that "learning science and technology is something that students do, not something that is done to them". A major component of Project SimBeLT is the development of multi-layered technology-oriented virtual labs that realistically mimic workplace-like environments. Dynamic data exchange between simulations will be implemented and links with instant instructional messages and data handling tools will be realized. A second important goal of Project SimBeLT labs is to bridge technical skills and scientific knowledge by enhancing the teaching and learning of specific scientific or engineering subjects. SimBeLT builds upon research and outcomes of interactive teaching strategies and tools developed through prior NSF funding (http://webphysics.nhctc.edu/compact/index.html) (Project SimBeLT is partially supported by a grant from the National Science Foundation DUE-0603277)

ANNOTATED BIBLIOGRAPHY FOR VOCATIONAL-TECHNICAL EDUCATION, 1966.

ERIC Educational Resources Information Center

BRUNETTI, FRANK; WILLIAMS, JEROME

MORE THAN 1,000 ITEMS ARE LISTED ALPHABETICALLY WITHIN SUBJECT AREAS. THE AREAS INCLUDE AGRICULTURAL EDUCATION, ART INDUSTRIES AND TRADE, BUSINESS EDUCATION, ECONOMICS, JOB ANALYSIS, LABOR AND DEMOCRACY, MANPOWER, OCCUPATIONAL HEALTH NURSING, OCCUPATIONS, PERSONNEL MANAGEMENT, TECHNICAL EDUCATION, VOCATIONAL GUIDANCE, VOCATIONAL MATHEMATICS,…

Environmental engineering education: examples of accreditation and quality assurance

NASA Astrophysics Data System (ADS)

Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

2013-12-01

Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In particular, the accreditation models of the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering are discussed. The critical issues to assure the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences, according to the more engineering focused EUR-ACE skill descriptors as well as with respect to the Dublin descriptors, at local and global scale are also compared. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities is also described. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is in addition assessed. The promotion of innovative aspects related with the environmental engineering education, and of the role that science and technology could play in environmental engineering education is also taken into consideration.

Higher Education Technical Corrections (Public Law 111-39)

ERIC Educational Resources Information Center

US Congress, 2009

2009-01-01

The Higher Education Technical Corrections (Public Law 111-39) was put in place to make technical corrections to the Higher Education Act of 1965, and for other purposes. The table of contents for this Act is as follows: (1) Sec. 1. Table of contents; (2) Sec. 2. References; and (3) Sec. 3. Effective date. (A) Title I--General Provisions: (4) Sec.…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

Technical and Vocational Education in Asia and Oceania. Report of a Regional Seminar (Singapore, Malaysia, November 20-27, 1979).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This seminar report contains summaries of presentations as well as entire reports and addresses made at the Regional Seminar on Technical and Vocational Education in Asia and Oceania held in Singapore in November 1979. Chapter 1 summarizes the trends, problems, and innovations in technical and vocational education which were identified in…

The Establishment of Centres for the Training of Teachers in Technical and Further Education in England, 1933-1950

ERIC Educational Resources Information Center

Bailey, Bill

2007-01-01

This paper examines the beginnings of courses of teacher training for teachers in technical and further education in England. First the development of the technical education sector and its distinctive part-time nature is traced, alongside the activities of the three associations representing the colleges and their staffs. The views of these on…

Linked Learning: Can Career and Technical Education Programs Take California High Schools into the 21st Century?

ERIC Educational Resources Information Center

Adams, Brian Edward

2012-01-01

This qualitative study explored the ability of a linked learning career and technical education program to engage fully students and thereby increase at-risk students' persistence in school. The focus was to identify the degree to which linked learning career and technical education programs provide a community atmosphere, increase and maintained…

Diversity in Career and Technical Education On-Line Classrooms: Considering Issues of Gender, Race and Age

ERIC Educational Resources Information Center

Ware, Mary C.; Stuck, Mary F.

2010-01-01

Designers and instructors of courses in career and technical education have realized the value of on-line delivery of instruction during the past several decades. Many students enrolled in career and technical education courses are what have been labeled "non-traditional" students. On-line learning is helpful to these students because it…

Academic Performance of Students during Transition Period before Choice of Disciplines in Nigeria Certificate in Education (Technical) Programme

ERIC Educational Resources Information Center

Amasuomo, Japo Oweikeye

2015-01-01

The study examined the academic performance of students in the compulsory courses in technical education during the transition period of first and second years of three years Nigeria Certificate in Education (NCE) Technical programme before choosing their disciplines in the third year. The study comprised of 237 students that consisted of…

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

Seizing the Future: How Ohio's Career-Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Careers

ERIC Educational Resources Information Center

Guarino, Heidi; Yoder, Shaun

2015-01-01

"Seizing the Future: How Ohio's Career and Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Work," demonstrates Ohio's progress in developing strong policies for career and technical education (CTE) programs to promote rigor, including college- and career-ready graduation…

A Qualitative Inquiry of Career Exploration in Highly Implemented Career and Technical Education Programs of Study

ERIC Educational Resources Information Center

Stipanovic, Natalie; Stringfield, Sam

2013-01-01

This qualitative study explores career counseling and guidance services as provided to students engaged in career and technical education programs at three sites in the United States. The sites, consisting of high schools and community colleges, were part of the National Research Center for Career and Technical Education's 5-year studies of…

Proceedings of the Office of Special Education Programs' Annual Technical Assistance and Dissemination Meeting (6th, Washington, DC, January 16-18, 1996).

ERIC Educational Resources Information Center

Special Education Programs (ED/OSERS), Washington, DC.

This document presents the proceedings for the Office of Special Education Programs' 6th Annual Technical Assistance and Dissemination Meeting held on January 16-18, 1996, in Washington, DC. Conference discussions centered around changing expectations for local and state education agencies and technical assistance and dissemination (TA&D)…

A Survey of Vocational Administrators and Teachers in Career and Technical Education Centers regarding Their Perception of Vocational Program Improvements

ERIC Educational Resources Information Center

Hummel, Richard Lynn, Jr.

2012-01-01

The purpose of this statewide study is to assess the perceived improvements made to programs that are offered at Career and Technical Education Centers from the perspective of vocational administrators and teachers following the Bureau of Career and Technical Education conduction of an Approved Program Evaluation. The Pennsylvania Bureau of Career…

Seminar for Preparation of Professional Personnel for Vocational-Technical Education. Final Report.

ERIC Educational Resources Information Center

Dillon, Roy D.; Horner, James T.

Seminar participants included college administrative officers, state vocational education directors, vocational-technical teacher educators, and Office of Education staff. The purpose of the June, 1968 seminar was to consider strategies for resolving critical vocational education personnel supply and demand problems. Presentations included in the…

Celebrating CTE Month 2008: ACTE Tours McKinley Technical High School

ERIC Educational Resources Information Center

Kidwai, Sabrina

2008-01-01

A delegation of visitors descended on McKinley Technical High School in Washington, D.C., on February 19 for Career and Technical Education (CTE) Month. ACTE staff, several congressional staffers, staff from SkillsUSA, FCCLA and the District of Columbia Department of Career and Technical Education visited the school--a public charter which offers…

Improving Career and Technical Education to Help Students Succeed in the Workforce. Hearing before the Subcommittee on Early Childhood, Elementary, and Secondary Education, Committee on Education and the Workforce, U.S. House of Representatives, One Hundred Fourteenth Congress, First Session (October 27, 2015). Serial Number 114-33

ERIC Educational Resources Information Center

US House of Representatives, 2016

2016-01-01

This document records testimony from a hearing held to examine the critical role of career and technical education programs in preparing the nation's students for success in college and career. Many of these programs are funded under the Carl D. Perkins Career and Technical Education Improvement Act of 2006. Member statements were provided by: (1)…

Technical efficiency of Shiraz school of medicine in research and education domains: a data envelopment analysis.

PubMed

Delavari, Somayeh; Rezaee, Rita; Hatam, Nahid; Delavari, Sajad

2016-01-01

Efficiency evaluation of universities and faculties is one of the tools that help managers to identify the departments' strengths and weakness. The main objective of the present research was to measure and compare the technical efficiency of Shiraz school of medicine departments using Data Envelopment Analysis (DEA) technique. This cross-sectional and retrospective study was performed on clinical and non-clinical departments in research and education domains over the period of 2006 to 2011. Different inputs and outputs were considered for research and educational domain separately. Efficiency was measured based on the observed optimal performance. Findings showed that pathology and anatomy departments achieved the score of 100 in technical efficiency in education during 2006 to 2011. During this period, parasitology, psychiatric and pediatrics department's achieved the score of 100 for technical efficiency in research domain. The lowest mean of relative educational efficiency belonged to orthopedic department; as to relative research efficiency, the lowest mean was shown in orthopedics and genetics departments. The mean technical efficiency of non-medical departments in education and research domain was 91.93 and 76.08, respectively, while the mean technical efficiency of the clinical department in educational and research fields was 91.02 and 82.23, respectively. Using multiple input and output in DEA technique provided a comprehensive evaluation of efficiency in Shiraz school of medicine departments. The DEA could successfully estimate the technical efficiency of the departments in research and educational fields. Moreover, the deficiency in each department was found; this could help them to plan for improvement.

Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

NASA Technical Reports Server (NTRS)

Jacobs, James A.

2003-01-01

The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

Implications of State Dental Board Disciplinary Actions for Teaching Dental Students About Emotional Intelligence.

PubMed

Munk, Lyle Kris

2016-01-01

The primary emphasis in dental education is on developing students' cognitive intelligence (thinking) and technical intelligence (doing), while emotional intelligence (being) receives less emphasis. The aim of this study was to explore a potential consequence of the paucity of emotional intelligence education by determining the level of emotional intelligence-related (EI-R) infractions in state dental board disciplinary actions and characterizing the types of those infractions. For this study, 1,100 disciplinary action reports from 21 state dental boards were reviewed, and disciplinary infractions were classified as cognitive intelligence-related (CI-R) infractions, technical intelligence-related (TI-R) infractions, and EI-R infractions. EI-R infractions were then subcategorized into emotional intelligence clusters and competencies using the Emotional and Social Competency Inventory (ESCI). The results showed that 56.6% of the infractions were EI-R. When the EI-R infractions were subcategorized, the four competencies most frequently violated involved transparency, teamwork and collaboration, organizational awareness, and accurate self-assessment. Understanding the frequency and nature of EI-R infractions may promote awareness of the need for increased attention to principles of emotional intelligence in dental education and may encourage integration of those principles across dental curricula to help students understand the impact of emotional intelligence on their future well-being and livelihood.

20 CFR 666.220 - What information must be included in a State Board's application for an Incentive Grant?

Code of Federal Regulations, 2010 CFR

2010-04-01

... the Carl D. Perkins Vocational and Technical Education Act. (3) The State exceeded the State... vocational and technical programs under the Carl D. Perkins Vocational and Technical Education Act. (WIA sec...

20 CFR 666.220 - What information must be included in a State Board's application for an Incentive Grant?

Code of Federal Regulations, 2011 CFR

2011-04-01

... the Carl D. Perkins Vocational and Technical Education Act. (3) The State exceeded the State... vocational and technical programs under the Carl D. Perkins Vocational and Technical Education Act. (WIA sec...

Creating a Pilot Educational Psychiatry Website: Opportunities, Barriers, and Next Steps.

PubMed

Torous, John; O'Connor, Ryan; Franzen, Jamie; Snow, Caitlin; Boland, Robert; Kitts, Robert

2015-11-05

While medical students and residents may be utilizing websites as online learning resources, medical trainees and educators now have the opportunity to create such educational websites and digital tools on their own. However, the process and theory of building educational websites for medical education have not yet been fully explored. To understand the opportunities, barriers, and process of creating a novel medical educational website. We created a pilot psychiatric educational website to better understand the options, opportunities, challenges, and processes involved in the creation of a psychiatric educational website. We sought to integrate visual and interactive Web design elements to underscore the potential of such Web technology. A pilot website (PsychOnCall) was created to demonstrate the potential of Web technology in medical and psychiatric education. Creating an educational website is now technically easier than ever before, and the primary challenge no longer is technology but rather the creation, validation, and maintenance of information for such websites as well as translating text-based didactics into visual and interactive tools. Medical educators can influence the design and implementation of online educational resources through creating their own websites and engaging medical students and residents in the process.

Creating a Pilot Educational Psychiatry Website: Opportunities, Barriers, and Next Steps

PubMed Central

O'Connor, Ryan; Franzen, Jamie; Snow, Caitlin; Boland, Robert; Kitts, Robert

2015-01-01

Background While medical students and residents may be utilizing websites as online learning resources, medical trainees and educators now have the opportunity to create such educational websites and digital tools on their own. However, the process and theory of building educational websites for medical education have not yet been fully explored. Objective To understand the opportunities, barriers, and process of creating a novel medical educational website. Methods We created a pilot psychiatric educational website to better understand the options, opportunities, challenges, and processes involved in the creation of a psychiatric educational website. We sought to integrate visual and interactive Web design elements to underscore the potential of such Web technology. Results A pilot website (PsychOnCall) was created to demonstrate the potential of Web technology in medical and psychiatric education. Conclusions Creating an educational website is now technically easier than ever before, and the primary challenge no longer is technology but rather the creation, validation, and maintenance of information for such websites as well as translating text-based didactics into visual and interactive tools. Medical educators can influence the design and implementation of online educational resources through creating their own websites and engaging medical students and residents in the process. PMID:27731837

Integration of Telemedicine in Graduate Medical Informatics Education

PubMed Central

Demiris, George

2003-01-01

An essential part of health informatics is telemedicine, the use of advanced telecommunications technologies to bridge distance and support health care delivery and education. This report discusses the integration of telemedicine into a medical informatics curriculum and, specifically, a framework for a telemedicine course. Within this framework, the objectives and exit competencies are presented and course sections are described: definitions, introduction to technical aspects of telemedicine, evolution of telemedicine and its impact on health care delivery, success and failure factors, and legal and ethical issues. The emphasis is on literature review tools, practical exposure to products and applications, and problem-based learning. Given the rapid advances in the telecommunication field, keeping the course material up to date becomes a challenge for the instructor who at the same time aims to equip students with the knowledge and tools they will need in their future role as decision makers to detect a need for, design, implement, maintain, or evaluate a telemedicine application. PMID:12668696

Integrating ethics into technical courses: micro-insertion.

PubMed

Davis, Michael

2006-10-01

Perhaps the most common reason science and engineering faculty give for not including 'ethics' (that is, research ethics, engineering ethics, or some discussion of professional responsibility) in their technical classes is that 'there is no room'. This article 1) describes a technique ('micro-insertion') that introduces ethics (and related topics) into technical courses in small enough units not to push out technical material, 2) explains where this technique might fit into the larger undertaking of integrating ethics into the technical (scientific or engineering) curriculum, and 3) concludes with some quantified evidence (collected over more than a decade) suggesting success. Integrating ethics into science and engineering courses is largely a matter of providing context for what is already being taught, context that also makes the material already being taught seem 'more relevant'.

Metric Education; A Position Paper for Vocational, Technical and Adult Education.

ERIC Educational Resources Information Center

Cooper, Gloria S.; And Others

Part of an Office of Education three-year project on metric education, the position paper is intended to alert and prepare teachers, curriculum developers, and administrators in vocational, technical, and adult education to the change over to the metric system. The five chapters cover issues in metric education, what the metric system is all…

Implementing a Workforce Development Pipeline

NASA Technical Reports Server (NTRS)

Hix, Billy

2002-01-01

Research shows that the number of highly trained scientists and engineers has continued a steady decline during the 1990's. Furthermore, at the high school level, almost 40% of the total high school graduates are seeking technical skills in preparation of entering the workforce directly. The decrease of students in technology and science programs, along with the lack of viable vocational programs, haunts educators and businesses alike. However, MSFC (Marshall Space Flight Center) has the opportunity to become a leading edge model of workforce development by offering a unified program of apprenticeships, workshops, and educational initiatives. These programs will be designed to encourage young people of all backgrounds to pursue the fields of technology and science, to assist research opportunities, and to support teachers in the systemic changes that they are facing. The emphasis of our program based on grade levels will be: Elementary Level: Exposure to the workforce. Middle School: Examine the workforce. High School and beyond: Instruct the workforce. It is proposed that MSFC create a well-integrated Workforce Development Pipeline Program. The program will act to integrate the many and varied programs offered across MSFC directorates and offices. It will offer a clear path of programs for students throughout middle school, high school, technical training, and college and universities. The end result would consist of technicians, bachelors degrees, masters degrees, and PhDs in science and engineering fields entering the nation's workforce, with a focus on NASA's future personnel needs.

Man, mind, and machine: the past and future of virtual reality simulation in neurologic surgery.

PubMed

Robison, R Aaron; Liu, Charles Y; Apuzzo, Michael L J

2011-11-01

To review virtual reality in neurosurgery, including the history of simulation and virtual reality and some of the current implementations; to examine some of the technical challenges involved; and to propose a potential paradigm for the development of virtual reality in neurosurgery going forward. A search was made on PubMed using key words surgical simulation, virtual reality, haptics, collision detection, and volumetric modeling to assess the current status of virtual reality in neurosurgery. Based on previous results, investigators extrapolated the possible integration of existing efforts and potential future directions. Simulation has a rich history in surgical training, and there are numerous currently existing applications and systems that involve virtual reality. All existing applications are limited to specific task-oriented functions and typically sacrifice visual realism for real-time interactivity or vice versa, owing to numerous technical challenges in rendering a virtual space in real time, including graphic and tissue modeling, collision detection, and direction of the haptic interface. With ongoing technical advancements in computer hardware and graphic and physical rendering, incremental or modular development of a fully immersive, multipurpose virtual reality neurosurgical simulator is feasible. The use of virtual reality in neurosurgery is predicted to change the nature of neurosurgical education, and to play an increased role in surgical rehearsal and the continuing education and credentialing of surgical practitioners. Copyright © 2011 Elsevier Inc. All rights reserved.

CTE Teachers' Perspectives on the Process of CTE and Science Content Integration: A Grounded Theory

NASA Astrophysics Data System (ADS)

Spindler, Matthew Kenneth

The integration of career and technical education (CTE) and academic curricular content that capitalizes on natural and inherent connections represents a challenge for CTE professionals. The research question that was used to guide the current study was: What are CTE teachers' perspectives of and experiences with the process of CTE and science content integration? And more specifically, to generate a grounded theory which explicates the process of CTE and science content integration from the perspective of CTE teachers. The CTE teachers expressed that the process of CTE and science content integration was a process of evolutionizing. From the perspective of the CTE teachers involved integrating CTE and science content resulted in their programs of study being adapted into something different than they were before the process of integration was begun. The CTE teachers revealed that the evolutions in their programs of study and themselves were associated with three other categories within the grounded theory: (a) connecting; (b) enacting; and (c) futuring. The process of CTE and science content integration represents a deep and complex episode for CTE teachers. The process of CTE and science content integration requires connecting to others, putting ideas into action, and an orienting towards the future.

Integrate oral communication with technical writing: Towards a rationale

NASA Technical Reports Server (NTRS)

Skelton, T.

1981-01-01

Integrating oral communication and technical writing instruction, to give students the opportunity to learn and practice interpersonal skills, is proposed. By linking speech and writing the importance of small-group interaction in developing transferrable ideas is acknowledged. Three reasons for integration are examined: workday activities, application of role-taking to writing, and conflict resolution. Four advantages of integration are stated.

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

Private Technical and Vocational Education in Sub-Saharan Africa: Provision Patterns and Policy Issues. New Trends in Technical and Vocational Education.

ERIC Educational Resources Information Center

Atchoarena, David; Esquieu, Paul

The private provision trend in technical and vocational education (TVE) in sub-Saharan Africa occurred as the deterioration of state-run TVE systems in the region created a market niche for private providers. While advocates of deregulation believe the adoption of market principles in TVE will lead to greater efficiency and effectiveness, private…

Vocational Guidance for Equal Access and Opportunity for Girls and Women in Technical and Vocational Education. UNEVOC Studies in Technical and Vocational Education 6.

ERIC Educational Resources Information Center

Miller, Juliet V.; Vetter, Louise

A study examined the relevance of vocational information and guidance for the equal access of girls and women to technical/vocational education in the following countries: Argentina; India; Mexico; Republic of Korea; South Africa; Spain; Sweden; Turkey; United Arab Emirates; and Zambia. Case studies were conducted by using a multiple-strategy…

Improving Secondary Career and Technical Education through Professional Development: Alternative Certification and Use of Technical Assessment Data

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2011

2011-01-01

Secondary career and technical education (CTE) is a field in transition. It is moving from a primary focus on preparing students for entry-level employment to preparing them for continuing education and training as well as employment. The rapid pace of change in technology and the global economy has created a demand for workers who are able to…

An Assessment of the Support Service Needs of Career and Technical Education Teachers and Their Students with Limited English Proficiency in Selected Pennsylvania AVTS's

ERIC Educational Resources Information Center

Wichowski, Chester P.; Nunez, Frances

2005-01-01

A survey was conducted among a population of 350 Career and Technical Education, CTE, teachers from 12 Career Technical Education Centers, CTC, sites in seven counties throughout Pennsylvania (return rate = 64%). The participating schools demographic settings, which were selected by the respondents, were closely divided between rural (37.9%) and…

Promotion of the Equal Access of Girls and Women to Technical and Vocational Education. Studies on Technical and Vocational Education 7.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This monograph includes the final report of the International Expert Meeting on the Promotion of Equal Access of Girls and Women to Technical and Vocational Education (TVE) held in Seoul, Republic of Korea, and country discussion papers. The final report is composed of an introduction that proposes that many Member States require special measures…

Meeting the Needs of Career and Technical Education: Observations from Graduates of a High School Health Science Program

ERIC Educational Resources Information Center

Avey, Matthew R.

2012-01-01

Career and Technical education has been around for some time, and has often been shaped by the current economic landscape of the country. While current evolving trends focus on relevance for students in the school setting, a coexistence with college preparation curriculum is now the new trend in modern technical education. New programs have…

Educational Television Personnel's Review of the Technical Quality, Content Criteria, and Marketability of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 31.

ERIC Educational Resources Information Center

Shively, Joe E.

In order to determine whether Appalachia Educational Laboratory (AEL) had the capability of producing a TV series of high technical quality with content that met criteria designed for the selection of children's television programs, a pilot tape produced by AEL was submitted for rating to educational television (ETV) specialists from the State…

Convention on Technical and Vocational Education Adopted by the General Conference of UNESCO at Its Twenty-Fifth Session, Paris, 10 November 1989 = Convention sur l'enseignement technique et professionel adoptee par la Conference generale a sa vingt-cinquieme session, Paris, 10 novembre 1989.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This document contains the Convention on Technical Education adopted by the General Conference of the United Nations Educational, Scientific, and Cultural Organization (UNESCO). English, French, and Russian versions are provided. Article 1 defines technical and vocational education, specifies its applicability, and states how it shall be applied.…

76 FR 32967 - Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... DEPARTMENT OF EDUCATION [CFDA No. 84.326H] Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center AGENCY: Office of Special Education Programs, Office of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice of proposed extension of...

Technosocial Modeling of IED Threat Scenarios and Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitney, Paul D.; Brothers, Alan J.; Coles, Garill A.

2009-03-23

This paper describes an approach for integrating sociological and technical models to develop more complete threat assessment. Current approaches to analyzing and addressing threats tend to focus on the technical factors. This paper addresses development of predictive models that encompass behavioral as well as these technical factors. Using improvised explosive device (IED) attacks as motivation, this model supports identification of intervention activities 'left of boom' as well as prioritizing attack modalities. We show how Bayes nets integrate social factors associated with IED attacks into general threat model containing technical and organizational steps from planning through obtaining the IED to initiationmore » of the attack. The social models are computationally-based representations of relevant social science literature that describes human decision making and physical factors. When combined with technical models, the resulting model provides improved knowledge integration into threat assessment for monitoring. This paper discusses the construction of IED threat scenarios, integration of diverse factors into an analytical framework for threat assessment, indicator identification for future threats, and future research directions.« less

Technical and Vocational Training.

ERIC Educational Resources Information Center

Vocational Training, 1993

1993-01-01

This issue focuses on the various forms that secondary technical and vocational education takes in different European Community Member States. "The Future for Skilled Workers" is an interview with Burkart Lutz, a German researcher. Other articles are as follows: "Contradictions in Technical and Vocational Education: The…

Sociotechnical Walkthrough: A Means for Knowledge Integration

ERIC Educational Resources Information Center

Herrmann, Thomas; Loser, Kai-Uwe; Jahnke, Isa

2007-01-01

Purpose: The purpose of this research is to show that for the successful development of socio-technical systems it is essential that various stakeholders are able to integrate their different knowledge and perspectives. A method that supports knowledge integration in the course of introduction and development of socio-technical systems is the…

Integrated Bibliographic Information System: Integrating Resources by Integrating Information Technologies.

ERIC Educational Resources Information Center

Cotter, Gladys A.; Hartt, Richard W.

The Defense Technical Information Center (DTIC), an organization charged with providing information services to the Department of Defense (DoD) scientific and technical community, actively seeks ways to promote resource sharing as a means for speeding access to information while reducing the costs of information processing throughout the technical…

IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

NASA Technical Reports Server (NTRS)

Vonholle, Joseph C.

1987-01-01

The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

Workplace Health and Safety across the Vocational/Technical Curriculum.

ERIC Educational Resources Information Center

Ryan, Thomas; Hinkley, Carl

This document contains the outcomes of a pilot project to develop materials and methods of integrating occupational health and safety into the curriculum of the technologies at a technical college. Section I is a model of how to integrate health and safety into a vocational-technical curriculum. Based on the Outcomes-Based Guidelines developed by…

Oak Ridge National Laboratory Core Competencies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberto, J.B.; Anderson, T.D.; Berven, B.A.

1994-12-01

A core competency is a distinguishing integration of capabilities which enables an organization to deliver mission results. Core competencies represent the collective learning of an organization and provide the capacity to perform present and future missions. Core competencies are distinguishing characteristics which offer comparative advantage and are difficult to reproduce. They exhibit customer focus, mission relevance, and vertical integration from research through applications. They are demonstrable by metrics such as level of investment, uniqueness of facilities and expertise, and national impact. The Oak Ridge National Laboratory (ORNL) has identified four core competencies which satisfy the above criteria. Each core competencymore » represents an annual investment of at least $100M and is characterized by an integration of Laboratory technical foundations in physical, chemical, and materials sciences; biological, environmental, and social sciences; engineering sciences; and computational sciences and informatics. The ability to integrate broad technical foundations to develop and sustain core competencies in support of national R&D goals is a distinguishing strength of the national laboratories. The ORNL core competencies are: 9 Energy Production and End-Use Technologies o Biological and Environmental Sciences and Technology o Advanced Materials Synthesis, Processing, and Characterization & Neutron-Based Science and Technology. The distinguishing characteristics of each ORNL core competency are described. In addition, written material is provided for two emerging competencies: Manufacturing Technologies and Computational Science and Advanced Computing. Distinguishing institutional competencies in the Development and Operation of National Research Facilities, R&D Integration and Partnerships, Technology Transfer, and Science Education are also described. Finally, financial data for the ORNL core competencies are summarized in the appendices.« less

Future Directions for Research on Online Technical Education

ERIC Educational Resources Information Center

Horvitz, Brian S.

2017-01-01

Most research on online learning in higher education has been focused on general education at four-year institutions. There is a need for more research that focuses on online and hybrid education at community colleges in technical education fields. This issue includes articles from eight National Science Foundation funded projects doing innovative…

Access Barriers to Distance Education Perceived by Inservice and Preservice Career and Technical Education Majors.

ERIC Educational Resources Information Center

Zirkle, Chris

The access barriers to distance education faced by inservice and preservice career and technical education (CTE) majors were examined through a survey of 76 students enrolled in undergraduate- and graduate-level CTE education programs. Completed questionnaires were received from 60 students (response rate, 78.9%). Forty respondents worked…

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya

PubMed Central

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-01-01

Abstract The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client–provider consultation sessions. The cross-sectional study observed 366 client–provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63–0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07–14.21), adequate infrastructure (5.29; 95% CI: 2.89–7.69) and reagents (1.48; 95% CI: 1.02–1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92–4.36), job satisfaction (2.02; 95% CI: 1.21–2.83) and supervision (1.01; 95% CI: 0.35–1.68), while workload (−0.88; 95% CI: −1.75 to − 0.01) was negatively associated. Technical quality of the client–provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client–provider consultation sessions as measured by both health facility structural and provider factors. PMID:29194543

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya.

PubMed

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-11-01

The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client-provider consultation sessions. The cross-sectional study observed 366 client-provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63-0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07-14.21), adequate infrastructure (5.29; 95% CI: 2.89-7.69) and reagents (1.48; 95% CI: 1.02-1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92-4.36), job satisfaction (2.02; 95% CI: 1.21-2.83) and supervision (1.01; 95% CI: 0.35-1.68), while workload (-0.88; 95% CI: -1.75 to - 0.01) was negatively associated. Technical quality of the client-provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client-provider consultation sessions as measured by both health facility structural and provider factors. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Delaware GK-12: Improvement of Science Education in Vocational Technical High Schools Through Collaborative Learning and Coteaching

NASA Astrophysics Data System (ADS)

Madsen, J.; Skalak, K.; Watson, G.; Scantlebury, K.; Allen, D.; Quillen, A.

2006-12-01

With funding from the National Science Foundation, the University of Delaware (UD) in partnership with the New Castle County Vocational Technical School District (NCCoVoTech) in Delaware has initiated a GK-12 Program. In each of year this program, nine full time UD graduate students in the sciences, who have completed all or most of their coursework, will be selected to serve as fellows. Participation in the GK-12 program benefits the graduate fellows in many ways. In addition to gaining general insight into current issues of science education, the fellows enhance their experience as scientific researchers by directly improving their ability to effectively communicate complex quantitative and technical knowledge to an audience with multiple and diverse learning needs. In the first year of this project, fellows have been paired with high school science teachers from NCCoVoTech. These pairs, along with the principal investigators (PIs) of this program have formed a learning community that is taking this opportunity to examine and to reflect on current issues in science education while specifically addressing critical needs in teaching science in vocational technical high schools. By participating in summer workshops and follow-up meetings facilitated by the PIs, the fellows have been introduced to a number of innovative teaching strategies including problem-based learning (PBL). Fellow/teacher pairs have begun to develop and teach PBL activities that are in agreement with State of Delaware science standards and that support student learning through inquiry. Fellows also have the opportunity to engage in coteaching with their teacher partner. In this "teaching at the elbow of another", fellows will gain a better understanding of and appreciation for the complexities and nuances of teaching science in vocational technical high schools. While not taught as a stand-alone course in NCCoVoTech high schools, earth science topics are integrated into the science curriculum at nearly all levels from the freshman through the senior year. Three of the current group of nine fellows are engaged in Ph.D.-level research within the disciplines of astronomy and hydrology. They will bring this expertise into their collaboration with their practicing teachers with the goal of improving the understanding of earth science topics by high school students within a vocational technical school setting.

What's in a Name?

ERIC Educational Resources Information Center

Hoyt, Kenneth B.

When the American Vocational Association changed its name to the Association for Career and Technical Education, it underscored the need for today's vocational educators to focus on both career education and technical education. The name change reflects the fact that today's work environment, labor market, and employment opportunities are very…

North Carolina Agricultural and Technical State University Drug Education Policy.

ERIC Educational Resources Information Center

Welborne, Sullivan; And Others

This drug education policy statement for North Carolina Agricultural and Technical State University establishes two educational objectives: to develop an educational program that increases the university community's knowledge and competency regarding controlled substances and to increase the skills required to take corrective action for potential…

Energy Technology Training Conference Proceedings (Atlanta, Georgia, October 27-29, 1976).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Conference goals included identifying projected technical manpower needs and skill mix requirements, potential obstacles to developing an adequate technical education base, and stimulating education, industry, and labor cooperation in technical program development and federal interagency coordination and cooperation. Findings of the conference…

Dental Education Required for the Changing Health Care Environment.

PubMed

Fontana, Margherita; González-Cabezas, Carlos; de Peralta, Tracy; Johnsen, David C

2017-08-01

To be able to meet the demands for care in 2040, dental graduates will need to address challenges resulting from the rapidly changing health care environment with knowledge and sets of skills to build on current standards and adapt to the future. The purposes of this article are to 1) analyze key challenges likely to evolve considerably between now and 2040 that will impact dental education and practice and 2) propose several sets of skills and educational outcomes necessary to address these challenges. The challenges discussed include changes in prevalence of oral diseases, dental practice patterns, materials and technologies, integrated medical-dental care, role of electronic health records, cultural competence, integrated curricula, interprofessional education, specialty-general balance, and web/cloud-based collaborations. To meet these challenges, the dental graduate will need skills such as core knowledge in basic and clinical dentistry, technical proficiency, critical thinking skills for lifelong learning, ethical and professional values, ability to manage a practice, social responsibility, and ability to function in a collegial intra- and interprofessional setting. Beyond the skills of the individual dentist will be the need for leadership in academia and the practice community. Academic and professional leaders will need to engage key constituencies to develop strategic directions and agendas with all parties pointed toward high standards for individual patients and the public at large. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Supporting international development through the integration of relevant 'soft-skills' into geoscience education

NASA Astrophysics Data System (ADS)

Gill, Joel C.

2014-05-01

Geologists have an important role to play in international development, improving disaster risk reduction and access to clean water, sanitation, infrastructure, and natural resources. That geologists can contribute to international development is well established. Less so, however, is an understanding of the 'soft' skills required to do this effectively. The fight against global poverty requires an integrated and interdisciplinary approach, demanding a host of skills other than technical geology. Factors such as cultural understanding, cross disciplinary communication, diplomacy, community mobilisation and participation are all aspects that, if lacking, may result in a project failing to have maximum impact. Whilst project success may be highly dependent on these skills and aspects of knowledge, opportunities to develop them throughout a geologist's education are not common. Through a discussion of two case studies (based on water and hazards work), this study seeks to demonstrate the value of an integrated approach and the skills that geologists should invest in at an early stage of their career. It proceeds to examine a range of practical ways by which geology students can develop these skills during and after their education. A number of these opportunities are currently being utilised by Geology for Global Development (GfGD), a not-for-profit organisation working in the UK to support young geoscientists to make a long-term and effective contribution to international development.

The Development of Technical and Vocational Education in Malaysia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Hee, Tieng Fok

The economic profile of Malaysia has changed from an economy mainly based on agriculture and the production of tin ore to a more balanced economy with continuing growth in the manufacturing and industrial sectors. Educational programs need to be upgraded and improved, particularly the direction and development of technical and vocational education…

The Development of Technical and Vocational Education in Indonesia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Bakri, Mohamad

After its independence in 1969, Indonesia studied and analyzed its previous colonial system of technical and vocational education (TVE) and took steps to overcome the shortcomings. TVE was required to provide expansion of work opportunities and industrial development to promote national development. Until 1989, attention was given to further…

National Strategies for Developing Human Resources through Technical and Vocational Education and Training. The 2001 KRIVET International Conference on Technical and Vocational Education and Training [Proceedings] (Seoul, South Korea, November 21-23, 2001).

ERIC Educational Resources Information Center

Korea Research Inst. for Vocational Education and Training, Seoul.

This document contains 19 papers and case studies, in English and Korean, from a conference on national strategies for developing human resources through technical and vocational education and training. The following are representative: "The Need to Innovate and Optimize Resources [Keynote]" (Wataru Iwamoto); "School to Work…

State Department Early Childhood Education Program Specialists' Review of the Content and Technical Quality of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 30.

ERIC Educational Resources Information Center

Shively, Joe E.

In order to determine whether Appalachia Educational Laboratory (AEL) had the capacity to produce a TV series of technical quality and whose content meets criteria designed for the selection of children's television programs, two pilot tapes were produced by AEL and submitted for rating to seven early childhood education specialists from seven…

STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

NASA Astrophysics Data System (ADS)

Crenshaw, Mark VanBuren

This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

Non-technical skills training to enhance patient safety.

PubMed

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

A Comparison of Career Technical Education--16 Career Pathway High School Participants with Non-Participants on Academic Achievement, School Engagement, and Development of Technical Skills

ERIC Educational Resources Information Center

Orozco, Edith Aimee

2010-01-01

The objective of this research was to compare Career Technical Education--16 Career Pathway high school participants with non-participants on academic achievement, development of technical skills and school engagement. Academic achievement was measured by Exit Level Math and English Language Arts Texas Assessment of Knowledge and Skills (TAKS)…

Efficiency in Resource Utilization in Education. Education and Development Technical Reports.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Directorate for Scientific Affairs.

This volume consists of papers presented at a meeting of scientific and technical personnel who examined and evaluated applications of systems analysis and operational research, and who related techniques to practical educational planning. Topics represent a variety of new management techniques available to educational administrators including…

Post-Secondary Occupational Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

Many implications exist for postsecondary educational institutions in the challenge of arriving at a responsible solution to the energy problem. The intent of the Energy Materials Conservation Education Act of 1975 is to call for a commitment by educators (community colleges, technical institutes, and trade and technical schools) to: (1) help…

34 CFR 300.119 - Technical assistance and training activities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION OF CHILDREN WITH DISABILITIES State Eligibility Least Restrictive Environment (lre) § 300.119... 34 Education 2 2011-07-01 2010-07-01 true Technical assistance and training activities. 300.119 Section 300.119 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...

34 CFR 380.6 - What activities may the Secretary fund under technical assistance supported employment projects?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED EMPLOYMENT SERVICES TO INDIVIDUALS... 34 Education 2 2010-07-01 2010-07-01 false What activities may the Secretary fund under technical...

Camels and Camshafts: Career and Technical Education in the Persian Gulf.

ERIC Educational Resources Information Center

Harnish, Dorothy

2003-01-01

Describes a cooperative project of the University of Georgia and the Ministry of Education and Youth in the United Arab Emirates to improve the secondary technical education system. Provides background information, describes project activities, looks at cultural issues, and discusses similarities and differences in education. (JOW)

Effects of Emotions on Learning in Adult, Career and Career-Technical Education. Trends and Issues Alert.

ERIC Educational Resources Information Center

Imel, Susan

Recent research conducted by neurologists and educators shows a strong link between emotion and reason. The role of emotion has been addressed in various ways in the fields of adult education and training, career education and development, and career and technical education (CTE). The term "emotional intelligence" (EI) is generally used…

Perceived Demand for Online and Hybrid Doctoral Programs in Technical Education

ERIC Educational Resources Information Center

Flowers, Jim; Baltzer, Holly

2006-01-01

Data from Sloan-C snapshot of the status of online education in the US indicate that online education is becomingly increasingly a part of the long-term goals and strategies of many institutions. Technical education has begun taking advantage of the online market by offering online education at the bachelor's and master's level. However, the…

How Engineers Perceive the Importance of Ethics in Finland

ERIC Educational Resources Information Center

Taajamaa, Ville; Majanoja, Anne-Maarit; Bairaktarova, Diana; Airola, Antti; Pahikkala, Tapio; Sutinen, Erkki

2018-01-01

Success in complex and holistic engineering practices requires more than problem-solving abilities and technical competencies. Engineering education must offer proficient technical competences and also train engineers to think and act ethically. A technical "engineering-like" focus and demand have made educators and students overlook the…

Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

ERIC Educational Resources Information Center

Sorensen, Mary K.; And Others

This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

Cryosphere Science Outreach using the Ice Sheet System Model and a Virtual Ice Sheet Laboratory

NASA Astrophysics Data System (ADS)

Cheng, D. L. C.; Halkides, D. J.; Larour, E. Y.

2015-12-01

Understanding the role of Cryosphere Science within the larger context of Sea Level Rise is both a technical and educational challenge that needs to be addressed if the public at large is to trulyunderstand the implications and consequences of Climate Change. Within this context, we propose a new approach in which scientific tools are used directly inside a mobile/website platform geared towards Education/Outreach. Here, we apply this approach by using the Ice Sheet System Model, a state of the art Cryosphere model developed at NASA, and integrated within a Virtual Ice Sheet Laboratory, with the goal is to outreach Cryospherescience to K-12 and College level students. The approach mixes laboratory experiments, interactive classes/lessons on a website, and a simplified interface to a full-fledged instance of ISSM to validate the classes/lessons. This novel approach leverages new insights from the Outreach/Educational community and the interest of new generations in web based technologies and simulation tools, all of it delivered in a seamlessly integrated web platform. This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

New Books for Industrial Educators

ERIC Educational Resources Information Center

School Shop, 1975

1975-01-01

The most recent book releases in the field of industrial-technical education are listed alphabetically under: automotive/power mechanics; building trades; drafting; electricity/electronics; graphic arts, industrial arts, vocational, technical and career education; industrial mathematics; machine shop/metalworking; metrics; radio/television;…

How to integrate the electronic health record and patient-centered communication into the medical visit: a skills-based approach.

PubMed

Duke, Pamela; Frankel, Richard M; Reis, Shmuel

2013-01-01

Implementation of the electronic health record (EHR) has changed the dynamics of doctor-patient communication. Physicians train to use EHRs from a technical standpoint, giving only minimal attention to integrating the human dimensions of the doctor-patient relationship into the computer-accompanied medical visit. This article reviews the literature and proposes a model to help clinicians, residents, and students improve physician-patient communication while using the EHR. We conducted a literature search on use of communication skills when interfacing with the EHR. We observed an instructional gap and developed a model using evidence-based communication skills. This model integrates patient-centered interview skills and aims to empower physicians to remain patient centered while effectively using EHRs. It may also serve as a template for future educational and practice interventions for use of the EHR in the examination room.

[2-stage group psychotherapy with integrated autogenic training within the scope of a general integrated psychotherapy concept].

PubMed

Barolin, Gerhard S

2003-01-01

Group-therapy and autogenic training in combination show mutual potentiation. Our results have proved the hypothesis to be true and we have also been able to explain it by an analysis of the neurophysiological and psychological findings concerning both methods. Our "model" has proved to be very economical in time and can be easily applied. It needs basic psychotherapeutical education but no special additive schooling. It is particularly well employed in rehabilitation patients, elderly patients and geronto-rehabilitation patients. As numbers of such patients are steadily increasing, it could soon become highly important, and in the technically dominated medicine of today, the particularly communicative component that we postulate in integrated psychotherapy could also grow in importance. By combining the two methods, it is not method that is at the centre of our endeavours but the patient.

Project Based Learning experiences in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; del Cura, Juan M.; Ezquerro, José M.; Lapuerta, Victoria; Cordero-Gracia, Marta

2015-10-01

This work describes the innovation activities performed in the field of space education since the academic year 2009/10 at the Technical University of Madrid (UPM), in collaboration with the Spanish User Support and Operations Center (E-USOC), the center assigned by the European Space Agency (ESA) in Spain to support the operations of scientific experiments on board the International Space Station. These activities have been integrated within the last year of the UPM Aerospace Engineering degree. A laboratory has been created, where students have to validate and integrate the subsystems of a microsatellite using demonstrator satellites. In parallel, the students participate in a Project Based Learning (PBL) training process in which they work in groups to develop the conceptual design of a space mission. One student in each group takes the role of project manager, another one is responsible for the mission design and the rest are each responsible for the design of one of the satellite subsystems. A ground station has also been set up with the help of students developing their final thesis, which will allow future students to perform training sessions and learn how to communicate with satellites, how to receive telemetry and how to process the data. Several surveys have been conducted along two academic years to evaluate the impact of these techniques in engineering learning. The surveys evaluate the acquisition of specific and generic competences, as well as the students' degree of satisfaction with respect to the use of these learning methodologies. The results of the surveys and the perception of the lecturers show that PBL encourages students' motivation and improves their results. They not only acquire better technical training, but also improve their transversal skills. It is also pointed out that this methodology requires more dedication from lecturers than traditional methods.

Guidelines for Establishing and Evaluating High School Technical Electromechanics Programs.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Technical and Adult Education.

Educators and industrial representatives developed these guidelines for school officials, instructors in technical education, and program and facility planners to use in planning a high school program in technical electromechanics. Designed to train students for entry into industry in applied electromechanics, the program includes electricity,…

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…