Words, concepts, or both: optimal indexing units for automated information retrieval.

PubMed Central

Hersh, W. R.; Hickam, D. H.; Leone, T. J.

1992-01-01

What is the best way to represent the content of documents in an information retrieval system? This study compares the retrieval effectiveness of five different methods for automated (machine-assigned) indexing using three test collections. The consistently best methods are those that use indexing based on the words that occur in the available text of each document. Methods used to map text into concepts from a controlled vocabulary showed no advantage over the word-based methods. This study also looked at an approach to relevance feedback which showed benefit for both word-based and concept-based methods. PMID:1482951

Comparative study between the results of effective index based matrix method and characterization of fabricated SU-8 waveguide

NASA Astrophysics Data System (ADS)

Samanta, Swagata; Dey, Pradip Kumar; Banerji, Pallab; Ganguly, Pranabendu

2017-01-01

A study regarding the validity of effective-index based matrix method (EIMM) for the fabricated SU-8 channel waveguides is reported. The design method is extremely fast compared to other existing numerical techniques, such as, BPM and FDTD. In EIMM, the effective index method was applied in depth direction of the waveguide and the resulted lateral index profile was analyzed by a transfer matrix method. By EIMM one can compute the guided mode propagation constants and mode profiles for each mode for any dimensions of the waveguides. The technique may also be used to design single mode waveguide. SU-8 waveguide fabrication was carried out by continuous-wave direct laser writing process at 375 nm wavelength. The measured propagation losses of these wire waveguides having air and PDMS as superstrates were 0.51 dB/mm and 0.3 dB/mm respectively. The number of guided modes, obtained theoretically as well as experimentally, for air-cladded waveguide was much more than that of PDMS-cladded waveguide. We were able to excite the isolated fundamental mode for the later by precise fiber positioning, and mode image was recorded. The mode profiles, mode indices, and refractive index profiles were extracted from this mode image of the fundamental mode which matched remarkably well with the theoretical predictions.

Study on load forecasting to data centers of high power density based on power usage effectiveness

NASA Astrophysics Data System (ADS)

Zhou, C. C.; Zhang, F.; Yuan, Z.; Zhou, L. M.; Wang, F. M.; Li, W.; Yang, J. H.

2016-08-01

There is usually considerable energy consumption in data centers. Load forecasting to data centers is in favor of formulating regional load density indexes and of great benefit to getting regional spatial load forecasting more accurately. The building structure and the other influential factors, i.e. equipment, geographic and climatic conditions, are considered for the data centers, and a method to forecast the load of the data centers based on power usage effectiveness is proposed. The cooling capacity of a data center and the index of the power usage effectiveness are used to forecast the power load of the data center in the method. The cooling capacity is obtained by calculating the heat load of the data center. The index is estimated using the group decision-making method of mixed language information. An example is given to prove the applicability and accuracy of this method.

Hypnosis control based on the minimum concentration of anesthetic drug for maintaining appropriate hypnosis.

PubMed

Furutani, Eiko; Nishigaki, Yuki; Kanda, Chiaki; Takeda, Toshihiro; Shirakami, Gotaro

2013-01-01

This paper proposes a novel hypnosis control method using Auditory Evoked Potential Index (aepEX) as a hypnosis index. In order to avoid side effects of an anesthetic drug, it is desirable to reduce the amount of an anesthetic drug during surgery. For this purpose many studies of hypnosis control systems have been done. Most of them use Bispectral Index (BIS), another hypnosis index, but it has problems of dependence on anesthetic drugs and nonsmooth change near some particular values. On the other hand, aepEX has an ability of clear distinction between patient consciousness and unconsciousness and independence of anesthetic drugs. The control method proposed in this paper consists of two elements: estimating the minimum effect-site concentration for maintaining appropriate hypnosis and adjusting infusion rate of an anesthetic drug, propofol, using model predictive control. The minimum effect-site concentration is estimated utilizing the property of aepEX pharmacodynamics. The infusion rate of propofol is adjusted so that effect-site concentration of propofol may be kept near and always above the minimum effect-site concentration. Simulation results of hypnosis control using the proposed method show that the minimum concentration can be estimated appropriately and that the proposed control method can maintain hypnosis adequately and reduce the total infusion amount of propofol.

Incomplete evidence: the inadequacy of databases in tracing published adverse drug reactions in clinical trials

PubMed Central

Derry, Sheena; Kong Loke, Yoon; Aronson, Jeffrey K

2001-01-01

Background We would expect information on adverse drug reactions in randomised clinical trials to be easily retrievable from specific searches of electronic databases. However, complete retrieval of such information may not be straightforward, for two reasons. First, not all clinical drug trials provide data on the frequency of adverse effects. Secondly, not all electronic records of trials include terms in the abstract or indexing fields that enable us to select those with adverse effects data. We have determined how often automated search methods, using indexing terms and/or textwords in the title or abstract, would fail to retrieve trials with adverse effects data. Methods We used a sample set of 107 trials known to report frequencies of adverse drug effects, and measured the proportion that (i) were not assigned the appropriate adverse effects indexing terms in the electronic databases, and (ii) did not contain identifiable adverse effects textwords in the title or abstract. Results Of the 81 trials with records on both MEDLINE and EMBASE, 25 were not indexed for adverse effects in either database. Twenty-six trials were indexed in one database but not the other. Only 66 of the 107 trials reporting adverse effects data mentioned this in the abstract or title of the paper. Simultaneous use of textword and indexing terms retrieved only 82/107 (77%) papers. Conclusions Specific search strategies based on adverse effects textwords and indexing terms will fail to identify nearly a quarter of trials that report on the rate of drug adverse effects. PMID:11591220

Index Fund Selections with GAs and Classifications Based on Turnover

NASA Astrophysics Data System (ADS)

Orito, Yukiko; Motoyama, Takaaki; Yamazaki, Genji

It is well known that index fund selections are important for the risk hedge of investment in a stock market. The`selection’means that for`stock index futures’, n companies of all ones in the market are selected. For index fund selections, Orito et al.(6) proposed a method consisting of the following two steps : Step 1 is to select N companies in the market with a heuristic rule based on the coefficient of determination between the return rate of each company in the market and the increasing rate of the stock price index. Step 2 is to construct a group of n companies by applying genetic algorithms to the set of N companies. We note that the rule of Step 1 is not unique. The accuracy of the results using their method depends on the length of time data (price data) in the experiments. The main purpose of this paper is to introduce a more`effective rule’for Step 1. The rule is based on turnover. The method consisting of Step 1 based on turnover and Step 2 is examined with numerical experiments for the 1st Section of Tokyo Stock Exchange. The results show that with our method, it is possible to construct the more effective index fund than the results of Orito et al.(6). The accuracy of the results using our method depends little on the length of time data (turnover data). The method especially works well when the increasing rate of the stock price index over a period can be viewed as a linear time series data.

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

A new state evaluation method of oil pump unit based on AHP and FCE

NASA Astrophysics Data System (ADS)

Lin, Yang; Liang, Wei; Qiu, Zeyang; Zhang, Meng; Lu, Wenqing

2017-05-01

In order to make an accurate state evaluation of oil pump unit, a comprehensive evaluation index should be established. A multi-parameters state evaluation method of oil pump unit is proposed in this paper. The oil pump unit is analyzed by Failure Mode and Effect Analysis (FMEA), so evaluation index can be obtained based on FMEA conclusions. The weights of different parameters in evaluation index are discussed using Analytic Hierarchy Process (AHP) with expert experience. According to the evaluation index and the weight of each parameter, the state evaluation is carried out by Fuzzy Comprehensive Evaluation (FCE) and the state is divided into five levels depending on status value, which is inspired by human body health. In order to verify the effectiveness and feasibility of the proposed method, a state evaluation of oil pump used in a pump station is taken as an example.

G-index: A new metric to describe dynamic refractive index effects in HPLC absorbance detection.

PubMed

Kraiczek, Karsten G; Rozing, Gerard P; Zengerle, Roland

2018-09-01

High performance liquid chromatography (HPLC) with a solvent gradient and absorbance detection is one of the most widely used methods in analytical chemistry. The observed absorbance baseline is affected by the changes in the refractive index (RI) of the mobile phase. Near the limited of detection, this complicates peak quantitation. The general aspects of these RI-induced apparent absorbance effects are discussed. Two different detectors with fundamentally different optics and flow cell concepts, a variable-wavelength detector equipped with a conventional flow cell and a diode-array detector equipped with a liquid core waveguide flow cell, are compared with respect to their RI behavior. A simple method to separate static - partly unavoidable - RI effects from dynamic RI effects is presented. It is shown that the dynamic RI behavior of an absorbance detector can be well described using a single, relatively easy-to-determine metric called the G-index. The G-index is typically in the order of a few seconds and its sign depends on the optical flow cell concept. Copyright © 2018 Elsevier B.V. All rights reserved.

A novel manifold-manifold distance index applied to looseness state assessment of viscoelastic sandwich structures

NASA Astrophysics Data System (ADS)

Sun, Chuang; Zhang, Zhousuo; Guo, Ting; Luo, Xue; Qu, Jinxiu; Zhang, Chenxuan; Cheng, Wei; Li, Bing

2014-06-01

Viscoelastic sandwich structures (VSS) are widely used in mechanical equipment; their state assessment is necessary to detect structural states and to keep equipment running with high reliability. This paper proposes a novel manifold-manifold distance-based assessment (M2DBA) method for assessing the looseness state in VSSs. In the M2DBA method, a manifold-manifold distance is viewed as a health index. To design the index, response signals from the structure are firstly acquired by condition monitoring technology and a Hankel matrix is constructed by using the response signals to describe state patterns of the VSS. Thereafter, a subspace analysis method, that is, principal component analysis (PCA), is performed to extract the condition subspace hidden in the Hankel matrix. From the subspace, pattern changes in dynamic structural properties are characterized. Further, a Grassmann manifold (GM) is formed by organizing a set of subspaces. The manifold is mapped to a reproducing kernel Hilbert space (RKHS), where support vector data description (SVDD) is used to model the manifold as a hypersphere. Finally, a health index is defined as the cosine of the angle between the hypersphere centers corresponding to the structural baseline state and the looseness state. The defined health index contains similarity information existing in the two structural states, so structural looseness states can be effectively identified. Moreover, the health index is derived by analysis of the global properties of subspace sets, which is different from traditional subspace analysis methods. The effectiveness of the health index for state assessment is validated by test data collected from a VSS subjected to different degrees of looseness. The results show that the health index is a very effective metric for detecting the occurrence and extension of structural looseness. Comparison results indicate that the defined index outperforms some existing state-of-the-art ones.

Methods to Calculate the Heat Index as an Exposure Metric in Environmental Health Research

PubMed Central

Bell, Michelle L.; Peng, Roger D.

2013-01-01

Background: Environmental health research employs a variety of metrics to measure heat exposure, both to directly study the health effects of outdoor temperature and to control for temperature in studies of other environmental exposures, including air pollution. To measure heat exposure, environmental health studies often use heat index, which incorporates both air temperature and moisture. However, the method of calculating heat index varies across environmental studies, which could mean that studies using different algorithms to calculate heat index may not be comparable. Objective and Methods: We investigated 21 separate heat index algorithms found in the literature to determine a) whether different algorithms generate heat index values that are consistent with the theoretical concepts of apparent temperature and b) whether different algorithms generate similar heat index values. Results: Although environmental studies differ in how they calculate heat index values, most studies’ heat index algorithms generate values consistent with apparent temperature. Additionally, most different algorithms generate closely correlated heat index values. However, a few algorithms are potentially problematic, especially in certain weather conditions (e.g., very low relative humidity, cold weather). To aid environmental health researchers, we have created open-source software in R to calculate the heat index using the U.S. National Weather Service’s algorithm. Conclusion: We identified 21 separate heat index algorithms used in environmental research. Our analysis demonstrated that methods to calculate heat index are inconsistent across studies. Careful choice of a heat index algorithm can help ensure reproducible and consistent environmental health research. Citation: Anderson GB, Bell ML, Peng RD. 2013. Methods to calculate the heat index as an exposure metric in environmental health research. Environ Health Perspect 121:1111–1119; http://dx.doi.org/10.1289/ehp.1206273 PMID:23934704

Application of Nemerow Index Method and Integrated Water Quality Index Method in Water Quality Assessment of Zhangze Reservoir

NASA Astrophysics Data System (ADS)

Zhang, Qian; Feng, Minquan; Hao, Xiaoyan

2018-03-01

[Objective] Based on the water quality historical data from the Zhangze Reservoir from the last five years, the water quality was assessed by the integrated water quality identification index method and the Nemerow pollution index method. The results of different evaluation methods were analyzed and compared and the characteristics of each method were identified.[Methods] The suitability of the water quality assessment methods were compared and analyzed, based on these results.[Results] the water quality tended to decrease over time with 2016 being the year with the worst water quality. The sections with the worst water quality were the southern and northern sections.[Conclusion] The results produced by the traditional Nemerow index method fluctuated greatly in each section of water quality monitoring and therefore could not effectively reveal the trend of water quality at each section. The combination of qualitative and quantitative measures of the comprehensive pollution index identification method meant it could evaluate the degree of water pollution as well as determine that the river water was black and odorous. However, the evaluation results showed that the water pollution was relatively low.The results from the improved Nemerow index evaluation were better as the single indicators and evaluation results are in strong agreement; therefore the method is able to objectively reflect the water quality of each water quality monitoring section and is more suitable for the water quality evaluation of the reservoir.

The Effects of Experimental Conditions on the Refractive Index and Density of Low-Temperature Ices: Solid Carbon Dioxide

NASA Technical Reports Server (NTRS)

Loeffler, M. J.; Moore, M. H.; Gerakines, P. A.

2016-01-01

We present the first study on the effects of the deposition technique on the measurements of the visible refractive index and the density of a low-temperature ice using solid carbon dioxide (CO2) at 14-70 K as an example. While our measurements generally agree with previous studies that show a dependence of index and density on temperature below 50 K, we also find that the measured values depend on the method used to create each sample. Below 50 K, we find that the refractive index varied by as much as 4% and the density by as much as 16% at a single temperature depending on the deposition method. We also show that the Lorentz-Lorenz approximation is valid for solid CO2 across the full 14-70 K temperature range, regardless of the deposition method used. Since the refractive index and density are important in calculations of optical constants and infrared (IR) band strengths of materials, our results suggest that the deposition method must be considered in cases where nvis and ? are not measured in the same experimental setup where the IR spectral measurements are made.

A rough set-based measurement model study on high-speed railway safety operation.

PubMed

Hu, Qizhou; Tan, Minjia; Lu, Huapu; Zhu, Yun

2018-01-01

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method's, which verifies the feasibility and effectiveness.

Database and new models based on a group contribution method to predict the refractive index of ionic liquids.

PubMed

Wang, Xinxin; Lu, Xingmei; Zhou, Qing; Zhao, Yongsheng; Li, Xiaoqian; Zhang, Suojiang

2017-08-02

Refractive index is one of the important physical properties, which is widely used in separation and purification. In this study, the refractive index data of ILs were collected to establish a comprehensive database, which included about 2138 pieces of data from 1996 to 2014. The Group Contribution-Artificial Neural Network (GC-ANN) model and Group Contribution (GC) method were employed to predict the refractive index of ILs at different temperatures from 283.15 K to 368.15 K. Average absolute relative deviations (AARD) of the GC-ANN model and the GC method were 0.179% and 0.628%, respectively. The results showed that a GC-ANN model provided an effective way to estimate the refractive index of ILs, whereas the GC method was simple and extensive. In summary, both of the models were accurate and efficient approaches for estimating refractive indices of ILs.

[Thinking about the present primary open angle glaucoma early diagnosis concepts and methods].

PubMed

Ren, Zeqin

2014-05-01

Early diagnosis of primary open-angle glaucoma has not been clear and consistent in concepts and methods. At present, according to the pathophysiology process of optic nerve damage and its detection technology, early diagnosis on the concept still belongs to the early clinical diagnosis instead of preclinical diagnosis, and on the method depends on the fundus as morphological index combined with the visual field as functional index. The direction of early clinical diagnosis mainly lies in exploring more effective diagnosis index, rather than blindly adopt new diagnostic technology.

[Comparative study on promoting blood effects of Danshen-Honghua herb pair with different preparations based on chemometrics and multi-attribute comprehensive index methods].

PubMed

Qu, Cheng; Tang, Yu-Ping; Shi, Xu-Qin; Zhou, Gui-Sheng; Shang, Er-Xin; Shang, Li-Li; Guo, Jian-Ming; Liu, Pei; Zhao, Jing; Zhao, Bu-Chang; Duan, Jin-Ao

2017-08-01

To evaluate the promoting blood circulation and removing blood stasis effects of Danshen-Honghua(DH) herb pair with different preparations (alcohol, 50% alcohol and water) on blood rheology and coagulation functions in acute blood stasis rats, and optimize the best preparation method of DH based on principal component analysis(PCA), hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods. Ice water bath and subcutaneous injection of adrenaline were both used to establish the acute blood stasis rat model. Then the blood stasis rats were administrated intragastrically with DH (alcohol, 50% alcohol and water) extracts. The whole blood viscosity(WBV), plasma viscosity(PV), erythrocyte sedimentation rate(ESR) and haematocrit(HCT) were tested to observe the effects of DH herb pair with different preparations and doses on hemorheology of blood stasis rats; the activated partial thromboplastin time(APTT), thrombin time(TT), prothrombin time(PT), and plasma fibrinogen(FIB) were tested to observe the effects of DH herb pair with different preparations on blood coagulation function and platelet aggregation of blood stasis rats. Then PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods were all used to comprehensively evaluate the total promoting blood circulation and removing blood stasis effects of DH herb pair with different preparations. The hemorheological indexes and coagulation parameters of model group had significant differences with normal blank group. As compared with the model group, the DH herb pair with different preparations at low, middle and high doses could improve the blood hemorheology indexes and coagulation parameters in acute blood stasis rats with dose-effect relation. Based on the PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods, the high dose group of 50% alcohol extract had the best effect of promoting blood circulation and removing blood stasis. Under the same dose but different preparations, 50% alcohol DH could obviously improve the hemorheology and blood coagulation function in acute blood stasis rats. These results suggested that DH herb pair with different preparations could obviously ameliorate the abnormality of hemorheology and blood coagulation function in acute blood stasis rats, and the optimized preparation of DH herb pair on promoting blood effects was 50% alcohol extract, providing scientific basis for more effective application of the DH herb pair in modern clinic medicine. Copyright© by the Chinese Pharmaceutical Association.

Weighting Criteria and Prioritizing of Heat stress indices in surface mining using a Delphi Technique and Fuzzy AHP-TOPSIS Method.

PubMed

Asghari, Mehdi; Nassiri, Parvin; Monazzam, Mohammad Reza; Golbabaei, Farideh; Arabalibeik, Hossein; Shamsipour, Aliakbar; Allahverdy, Armin

2017-01-01

Heat stress as a physical harmful agent can increase the risk of health and safety problems in different workplaces such as mining. Although there are different indices to assess the heat stress imposed on workers, choosing the best index for a specific workplace is so important. Since various criteria affect an index applicability, extracting the most effective ones and determining their weights help to prioritize the existing indices and select the optimal index. In order to achieve this aim, present study compared some heat stress indices using effective methods. The viewpoints of occupational health experts and the qualitative Delphi methods were used to extract the most important criteria. Then, the weights of 11 selected criteria were determined by Fuzzy Analytic Hierarchy Process. Finally, fuzzy TOPSIS technique was applied for choosing the most suitable heat stress index. According to result, simplicity, reliability, being low cost, and comprehensiveness were the most determinative criteria for a heat stress index. Based on these criteria and their weights, the existing indices were prioritized. Eventually, wet bulb glob temperature appropriated the first priority and it was proposed as an applicable index for evaluating the heat stress at outdoor hot environments such as surface mines. The use of these strong methods allows introducing the most simple, precise, and applicable tool for evaluation the heat stress in hot environments. It seems that WBGT acts as an appropriate index for assessing the heat stress in mining activities at outdoors.

A genotype probability index for multiple alleles and haplotypes.

PubMed

Percy, A; Kinghorn, B P

2005-12-01

We use linear algebra to calculate an index of information content in genotype probabilities which has previously been calculated using trigonometry. The new method can be generalized allowing the index to be calculated for loci with more than two alleles. Applications of this index include its use in genotyping strategies, strategies to manage genetic disorders and in estimation of genotype effects.

Multi-Level Bitmap Indexes for Flash Memory Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Kesheng; Madduri, Kamesh; Canon, Shane

2010-07-23

Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data atmore » the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.« less

Photoacoustic measurement of refractive index of dye solutions and myoglobin for biosensing applications

PubMed Central

Goldschmidt, Benjamin S.; Mehta, Smit; Mosley, Jeff; Walter, Chris; Whiteside, Paul J. D.; Hunt, Heather K.; Viator, John A.

2013-01-01

Current methods of determining the refractive index of chemicals and materials, such as ellipsometry and reflectometry, are limited by their inability to analyze highly absorbing or highly transparent materials, as well as the required prior knowledge of the sample thickness and estimated refractive index. Here, we present a method of determining the refractive index of solutions using the photoacoustic effect. We show that a photoacoustic refractometer can analyze highly absorbing dye samples to within 0.006 refractive index units of a handheld optical refractometer. Further, we use myoglobin, an early non-invasive biomarker for malignant hyperthermia, as a proof of concept that this technique is applicable for use as a medical diagnostic. Comparison of the speed, cost, simplicity, and accuracy of the techniques shows that this photoacoustic method is well-suited for optically complex systems. PMID:24298407

A study on reliability of power customer in distribution network

NASA Astrophysics Data System (ADS)

Liu, Liyuan; Ouyang, Sen; Chen, Danling; Ma, Shaohua; Wang, Xin

2017-05-01

The existing power supply reliability index system is oriented to power system without considering actual electricity availability in customer side. In addition, it is unable to reflect outage or customer’s equipment shutdown caused by instantaneous interruption and power quality problem. This paper thus makes a systematic study on reliability of power customer. By comparing with power supply reliability, reliability of power customer is defined and extracted its evaluation requirements. An indexes system, consisting of seven customer indexes and two contrast indexes, are designed to describe reliability of power customer from continuity and availability. In order to comprehensively and quantitatively evaluate reliability of power customer in distribution networks, reliability evaluation method is proposed based on improved entropy method and the punishment weighting principle. Practical application has proved that reliability index system and evaluation method for power customer is reasonable and effective.

The Instructional Cost Index. A Simplified Approach to Interinstitutional Cost Comparison.

ERIC Educational Resources Information Center

Beatty, George, Jr.; And Others

The paper describes a simple, yet effective method of computing a comparative index of instructional costs. The Instructional Cost Index identifies direct cost differentials among instructional programs. Cost differentials are described in terms of differences among numerical values of variables that reflect fundamental academic and resource…

Full extraction methods to retrieve effective refractive index and parameters of a bianisotropic metamaterial based on material dispersion models

NASA Astrophysics Data System (ADS)

Hsieh, Feng-Ju; Wang, Wei-Chih

2012-09-01

This paper discusses two improved methods in retrieving effective refractive indices, impedances, and material properties, such as permittivity (ɛ) and permeability (μ), of metamaterials. The first method modified from Kong's retrieval method allows effective constitutive parameters over all frequencies including the anti-resonant band, where imaginary parts of ɛ or μ are negative, to be solved. The second method is based on genetic algorithms and optimization of properly defined goal functions to retrieve parameters of the Drude and Lorentz dispersion models. Equations of effective refractive index and impedance at any reference planes are derived. Split ring resonator-rod based metamaterials operating in terahertz frequencies are designed and investigated with proposed methods. Retrieved material properties and parameters are used to regenerate S-parameters and compared with simulation results generated by cst microwave studio software.

Method of determining dispersion dependence of refractive index of nanospheres building opals

NASA Astrophysics Data System (ADS)

Kępińska, Mirosława; Starczewska, Anna; Duka, Piotr

2017-11-01

The method of determining dispersion dependence of refractive index of nanospheres building opals is presented. In this method basing on angular dependences of the spectral positions of Bragg diffraction minima on transmission spectra for opal series of known spheres diameter, the spectrum of effective refractive index for opals and then refractive index for material building opal's spheres is determined. The described procedure is used for determination of neff(λ) for opals and nsph(λ) for material which spheres building investigated opals are made of. The obtained results are compared with literature data of nSiO2(λ) considered in the analysis and interpretation of extremes related to the light diffraction at (hkl) SiO2 opal planes.

Intraocular lens power calculation following LASIK: determination of the new effective index of refraction.

PubMed

Jarade, Elias F; Abi Nader, Françoise C; Tabbara, Khalid F

2006-01-01

To determine the new corneal effective index of refraction (rN) following LASIK to be used for accurate keratometry reading (K-reading). A total of 332 eyes that underwent myopic LASIK were divided into two groups (group A [n = 137] and group B [n = 1951). In each group, patients were divided into four subgroups according to the amount of spherical equivalent refraction of myopic LASIK ablation (subgroup 1 [< -4.0 D], subgroup 2 [-4.0 to < -8.0 D], subgroup 3 [-8.0 to -12.0 D], and subgroup 4 [> -12.0 D]). In each subgroup of group A, K-reading was measured by the clinical history method and the new corneal effective index (rN) was determined using paraxial formula: (K-reading = (rN-1)/Ra), where Ra is the radius of curvature of the anterior corneal surface. In group B, the anterior radius of curvature of the cornea was determined by automated K-reading, and K-reading was measured in each subgroup using the new effective index in paraxial formula, clinical history method, and automated K-reading. In group A, the new effective index of refraction was 1.3355, 1.3286, 1.3237, and 1.3172 in the four subgroups, respectively. In group B, the mean K-reading measurements using rN in paraxial formula, clinical history method, and automated K-reading were: 40.33 +/- 1.68 D, 40.33 +/- 1.67 D, and 40.54 +/- 1.69 D, respectively, in subgroup 1; 37.96 +/- 1.26 D, 38.03 +/- 1.38 D, and 38.98 +/- 1.28 D, respectively, in subgroup 2; 35.77 +/- 1.75 D, 35.84 +/- 1.85 D, and 37.29 +/- 1.83 D, respectively, in subgroup 3; and 34.03 +/- 1.49 D, 34.15 +/- 1.84 D, and 36.21 +/- 1.59 D, respectively, in subgroup 4. In all subgroups of group B, the results of K-reading obtained using the new effective index of refraction were statistically similar to the results obtained by clinical history method (P > .05). Automated K-reading statistically overestimated the K-reading values in subgroups 2, 3, and 4 of group B (P < .001). The use of the new corneal effective index of refraction allows for an accurate derivation of K-reading from the anterior radius of curvature.

[Designing dental manpower index to evaluate dental manpower resources].

PubMed

Li, Gang; Ni, Zong-zan

2004-06-01

The purpose of this investigation is to find out a method to evaluate dental manpower resources. We selected population, GDP, number of dentist and number of different oral health professionals from certain internet stations, published books and journals from 1996 to 2000 as our investigating data. Data was collected from 100 countries. Our investigation found that the design of dental manpower index to evaluate dental manpower resources was effective and convenient. Dental manpower index is a good method to evaluate dental manpower resources.

Psychophysical "blinding" methods reveal a functional hierarchy of unconscious visual processing.

PubMed

Breitmeyer, Bruno G

2015-09-01

Numerous non-invasive experimental "blinding" methods exist for suppressing the phenomenal awareness of visual stimuli. Not all of these suppressive methods occur at, and thus index, the same level of unconscious visual processing. This suggests that a functional hierarchy of unconscious visual processing can in principle be established. The empirical results of extant studies that have used a number of different methods and additional reasonable theoretical considerations suggest the following tentative hierarchy. At the highest levels in this hierarchy is unconscious processing indexed by object-substitution masking. The functional levels indexed by crowding, the attentional blink (and other attentional blinding methods), backward pattern masking, metacontrast masking, continuous flash suppression, sandwich masking, and single-flash interocular suppression, fall at progressively lower levels, while unconscious processing at the lowest levels is indexed by eye-based binocular-rivalry suppression. Although unconscious processing levels indexed by additional blinding methods is yet to be determined, a tentative placement at lower levels in the hierarchy is also given for unconscious processing indexed by Troxler fading and adaptation-induced blindness, and at higher levels in the hierarchy indexed by attentional blinding effects in addition to the level indexed by the attentional blink. The full mapping of levels in the functional hierarchy onto cortical activation sites and levels is yet to be determined. The existence of such a hierarchy bears importantly on the search for, and the distinctions between, neural correlates of conscious and unconscious vision. Copyright © 2015 Elsevier Inc. All rights reserved.

Non-uniform refractive index field measurement based on light field imaging technique

NASA Astrophysics Data System (ADS)

Du, Xiaokun; Zhang, Yumin; Zhou, Mengjie; Xu, Dong

2018-02-01

In this paper, a method for measuring the non-uniform refractive index field based on the light field imaging technique is proposed. First, the light field camera is used to collect the four-dimensional light field data, and then the light field data is decoded according to the light field imaging principle to obtain image sequences with different acquisition angles of the refractive index field. Subsequently PIV (Particle Image Velocimetry) technique is used to extract ray offset of each image. Finally, the distribution of non-uniform refractive index field can be calculated by inversing the deflection of light rays. Compared with traditional optical methods which require multiple optical detectors from multiple angles to synchronously collect data, the method proposed in this paper only needs a light field camera and shoot once. The effectiveness of the method has been verified by the experiment which quantitatively measures the distribution of the refractive index field above the flame of the alcohol lamp.

The link between symptoms of office building occupants and in-office air pollution: the Indoor Air Pollution Index.

PubMed

Sofuoglu, S C; Moschandreas, D J

2003-12-01

The lack of an effective indoor air quality (IAQ) metric causes communication concerns among building tenants (the public), building managers (decision-makers), and IAQ investigators (engineers). The Indoor Air Pollution Index (IAPI) is developed for office buildings to bridge this communication discord. The index, simple and easily understood, employs the range of pollutant concentrations and concentrations in the subject building to estimate a unitless single number, the IAPI, between 0 (lowest pollution level and best IAQ) and ten (highest pollution level and worst IAQ). The index provides a relative measure of indoor air pollution for office buildings and ranks office indoor air pollution relative to the index distribution of the US office building population. Furthermore, the index associates well with occupant symptoms, percentage of occupants with persistent symptoms. A tree-structured method is utilized in conjunction with the arithmetic mean as the aggregation function. The hierarchical structure of the method renders not only one index value, but also several sub-index values that are critical in the study of an office air environment. The use of the IAPI for IAQ management is illustrated with an example. The decomposition of the index leads to the ranking of sampled pollutants by their relative contribution to the index and the identification of dominant pollutant(s). This information can be applied to design an effective strategy for reducing in-office air pollution.

Effects of Storytelling-Based Education in the Prevention of Drug Abuse among Adolescents in Iran Based on a Readiness to Addiction Index

PubMed Central

Moghadam, Mahdieh Poodineh; Sari, Mahdieh; Balouchi, Abbas; Moghadam, Khadijeh

2016-01-01

Introduction One of the most effective strategies in the prevention of addiction is increasing awareness among young people, towards the tendency for taking drugs their physical, mental and social side effects. Storytelling is effective for increasing characteristics of happiness and resilience. This study uses storytelling, a common and popular method to increase awareness among adolescents. Aim To examine the effect of storytelling-based education on the prevention of drug abuse, based on a readiness to addiction index. Materials and Methods This quasi-experimental study was conducted on 136 high school students (grade one), selected by a cluster sampling procedure from May 2014 to February 2015 in Zabol, Iran. The instrument for gathering data was a readiness to addiction questionnaire. This questionnaire included 41 items for which the scoring of each item followed the Likerts format. The data gathered was analysed using SPSS version 21 with descriptive statistics and inferential statistics. Results The results revealed that the mean of the readiness to addiction index in the case group fell from 75.66±19.99 to 69.57±21.83 (paired t-test; p =0.02); in the control group the same index changed from 103.01±21.88 to 93.98±27.70 (paired t-test, p = 0.775). That is, the index decreased for both groups, but the reduction was statistically significant only for the case group (p =0.02). Conclusion This suggests that the narrative method is effective in reducing adolescents readiness to addiction. Storytelling is an effective way to raise awareness among young people about addiction and its detrimental impacts on health. Therefore, such a technique can be taken into consideration in teaching principles of prevention. PMID:28050403

[Application of three risk assessment models in occupational health risk assessment of dimethylformamide].

PubMed

Wu, Z J; Xu, B; Jiang, H; Zheng, M; Zhang, M; Zhao, W J; Cheng, J

2016-08-20

Objective: To investigate the application of United States Environmental Protection Agency (EPA) inhalation risk assessment model, Singapore semi-quantitative risk assessment model, and occupational hazards risk assessment index method in occupational health risk in enterprises using dimethylformamide (DMF) in a certain area in Jiangsu, China, and to put forward related risk control measures. Methods: The industries involving DMF exposure in Jiangsu province were chosen as the evaluation objects in 2013 and three risk assessment models were used in the evaluation. EPA inhalation risk assessment model: HQ=EC/RfC; Singapore semi-quantitative risk assessment model: Risk= (HR×ER) 1/2 ; Occupational hazards risk assessment index=2 Health effect level ×2 exposure ratio ×Operation condition level. Results: The results of hazard quotient (HQ>1) from EPA inhalation risk assessment model suggested that all the workshops (dry method, wet method and printing) and work positions (pasting, burdening, unreeling, rolling, assisting) were high risk. The results of Singapore semi-quantitative risk assessment model indicated that the workshop risk level of dry method, wet method and printing were 3.5 (high) , 3.5 (high) and 2.8 (general) , and position risk level of pasting, burdening, unreeling, rolling, assisting were 4 (high) , 4 (high) , 2.8 (general) , 2.8 (general) and 2.8 (general) . The results of occupational hazards risk assessment index method demonstrated that the position risk index of pasting, burdening, unreeling, rolling, assisting were 42 (high) , 33 (high) , 23 (middle) , 21 (middle) and 22 (middle) . The results of Singapore semi-quantitative risk assessment model and occupational hazards risk assessment index method were similar, while EPA inhalation risk assessment model indicated all the workshops and positions were high risk. Conclusion: The occupational hazards risk assessment index method fully considers health effects, exposure, and operating conditions and can comprehensively and accurately evaluate occupational health risk caused by DMF.

A Materials Index--Its Storage, Retrieval, and Display

ERIC Educational Resources Information Center

Rosen, Carol Z.

1973-01-01

An experimental procedure for indexing physical materials based on simple syntactical rules was tested by encoding the materials in the journal, Applied Physics Letters,'' to produce a materials index. The syntax and numerous examples together with an indication of the method by which retrieval can be effected are presented. (5 references)…

Compression of Index Term Dictionary in an Inverted-File-Oriented Database: Some Effective Algorithms.

ERIC Educational Resources Information Center

Wisniewski, Janusz L.

1986-01-01

Discussion of a new method of index term dictionary compression in an inverted-file-oriented database highlights a technique of word coding, which generates short fixed-length codes obtained from the index terms themselves by analysis of monogram and bigram statistical distributions. Substantial savings in communication channel utilization are…

Digital Logic and Reconfigurable Interconnects Using Aluminum Gallium Arsenide Electro-Optic Fredkin Gates

DTIC Science & Technology

1994-06-01

length and coupling coefficient for the zero-gap directional coupler are obtained by using Eq. 3.2.39. Bums and Milton Effective Index Method In a 1975...nj) with •i wavegulde thicness b. Effective index N1 is then used to find the effective >Vt.,:, ;- 105 c a ¶ 2 n. n_ z n2 - : n4 Three-Dimensional...constant for the TM, modes is determined in a manner similar to the one used for the TEp modes. First, effective index N1 of 2-D Waveguide I is found by

Experimental investigation of gas flow rate and electric field effect on refractive index and electron density distribution of cold atmospheric pressure-plasma by optical method, Moiré deflectometry

NASA Astrophysics Data System (ADS)

Khanzadeh, Mohammad; Jamal, Fatemeh; Shariat, Mahdi

2018-04-01

Nowadays, cold atmospheric-pressure (CAP) helium plasma jets are widely used in material processing devices in various industries. Researchers often use indirect and spectrometric methods for measuring the plasma parameters which are very expensive. In this paper, for the first time, characterization of CAP, i.e., finding its parameters such as refractive index and electron density distribution, was carried out using an optical method, Moiré deflectometry. This method is a wave front analysis technique based on geometric optics. The advantages of this method are simplicity, high accuracy, and low cost along with the non-contact, non-destructive, and direct measurement of CAP parameters. This method demonstrates that as the helium gas flow rate decreases, the refractive index increases. Also, we must note that the refractive index is larger in the gas flow consisting of different flow rates of plasma comparing with the gas flow without the plasma.

Geometrical-optics approximation of forward scattering by gradient-index spheres.

PubMed

Li, Xiangzhen; Han, Xiang'e; Li, Renxian; Jiang, Huifen

2007-08-01

By means of geometrical optics we present an approximation method for acceleration of the computation of the scattering intensity distribution within a forward angular range (0-60 degrees ) for gradient-index spheres illuminated by a plane wave. The incident angle of reflected light is determined by the scattering angle, thus improving the approximation accuracy. The scattering angle and the optical path length are numerically integrated by a general-purpose integrator. With some special index models, the scattering angle and the optical path length can be expressed by a unique function and the calculation is faster. This method is proved effective for transparent particles with size parameters greater than 50. It fails to give good approximation results at scattering angles whose refractive rays are in the backward direction. For different index models, the geometrical-optics approximation is effective only for forward angles, typically those less than 60 degrees or when the refractive-index difference of a particle is less than a certain value.

Measuring the Refractive Index of Highly Crystalline Monolayer MoS2 with High Confidence

PubMed Central

Zhang, Hui; Ma, Yaoguang; Wan, Yi; Rong, Xin; Xie, Ziang; Wang, Wei; Dai, Lun

2015-01-01

Monolayer molybdenum disulphide (MoS2) has attracted much attention, due to its attractive properties, such as two-dimensional properties, direct bandgap, valley-selective circular dichroism, and valley Hall effect. However, some of its fundamental physical parameters, e.g. refractive index, have not been studied in detail because of measurement difficulties. In this work, we have synthesized highly crystalline monolayer MoS2 on SiO2/Si substrates via chemical vapor deposition (CVD) method and devised a method to measure their optical contrast spectra. Using these contrast spectra, we extracted the complex refractive index spectrum of monolayer MoS2 in the wavelength range of 400 nm to 750 nm. We have analyzed the pronounced difference between the obtained complex refractive index spectrum and that of bulk MoS2. The method presented here is effective for two-dimensional materials of small size. Furthermore, we have calculated the color contour plots of the contrast as a function of both SiO2 thickness and incident light wavelength for monolayer MoS2 using the obtained refractive index spectrum. These plots are useful for both fundamental study and device application. PMID:25676089

Measuring the refractive index of highly crystalline monolayer MoS2 with high confidence.

PubMed

Zhang, Hui; Ma, Yaoguang; Wan, Yi; Rong, Xin; Xie, Ziang; Wang, Wei; Dai, Lun

2015-02-13

Monolayer molybdenum disulphide (MoS2) has attracted much attention, due to its attractive properties, such as two-dimensional properties, direct bandgap, valley-selective circular dichroism, and valley Hall effect. However, some of its fundamental physical parameters, e.g. refractive index, have not been studied in detail because of measurement difficulties. In this work, we have synthesized highly crystalline monolayer MoS2 on SiO2/Si substrates via chemical vapor deposition (CVD) method and devised a method to measure their optical contrast spectra. Using these contrast spectra, we extracted the complex refractive index spectrum of monolayer MoS2 in the wavelength range of 400 nm to 750 nm. We have analyzed the pronounced difference between the obtained complex refractive index spectrum and that of bulk MoS2. The method presented here is effective for two-dimensional materials of small size. Furthermore, we have calculated the color contour plots of the contrast as a function of both SiO2 thickness and incident light wavelength for monolayer MoS2 using the obtained refractive index spectrum. These plots are useful for both fundamental study and device application.

Measuring the Refractive Index of Highly Crystalline Monolayer MoS2 with High Confidence

NASA Astrophysics Data System (ADS)

Zhang, Hui; Ma, Yaoguang; Wan, Yi; Rong, Xin; Xie, Ziang; Wang, Wei; Dai, Lun

2015-02-01

Monolayer molybdenum disulphide (MoS2) has attracted much attention, due to its attractive properties, such as two-dimensional properties, direct bandgap, valley-selective circular dichroism, and valley Hall effect. However, some of its fundamental physical parameters, e.g. refractive index, have not been studied in detail because of measurement difficulties. In this work, we have synthesized highly crystalline monolayer MoS2 on SiO2/Si substrates via chemical vapor deposition (CVD) method and devised a method to measure their optical contrast spectra. Using these contrast spectra, we extracted the complex refractive index spectrum of monolayer MoS2 in the wavelength range of 400 nm to 750 nm. We have analyzed the pronounced difference between the obtained complex refractive index spectrum and that of bulk MoS2. The method presented here is effective for two-dimensional materials of small size. Furthermore, we have calculated the color contour plots of the contrast as a function of both SiO2 thickness and incident light wavelength for monolayer MoS2 using the obtained refractive index spectrum. These plots are useful for both fundamental study and device application.

Modulation Index Adjustment for Recovery of Pure Wavelength Modulation Spectroscopy Second Harmonic Signal Waveforms.

PubMed

Wei, Wei; Chang, Jun; Wang, Qiang; Qin, Zengguang

2017-01-15

A new technique of modulation index adjustment for pure wavelength modulation spectroscopy second harmonic signal waveforms recovery is presented. As the modulation index is a key parameter in determining the exact form of the signals generated by the technique of wavelength modulation spectroscopy, the method of modulation index adjustment is applied to recover the second harmonic signal with wavelength modulation spectroscopy. By comparing the measured profile with the theoretical profile by calculation, the relationship between the modulation index and average quantities of the scanning wavelength can be obtained. Furthermore, when the relationship is applied in the experimental setup by point-by-point modulation index modification for gas detection, the results show good agreement with the theoretical profile and signal waveform distortion (such as the amplitude modulation effect caused by diode laser) can be suppressed. Besides, the method of modulation index adjustment can be used in many other aspects which involve profile improvement. In practical applications, when the amplitude modulation effect can be neglected and the stability of the detection system is limited by the sampling rate of analog-to-digital, modulation index adjustment can be used to improve detection into softer inflection points and solve the insufficient sampling problem. As a result, measurement stability is improved by 40%.

Modulation Index Adjustment for Recovery of Pure Wavelength Modulation Spectroscopy Second Harmonic Signal Waveforms

PubMed Central

Wei, Wei; Chang, Jun; Wang, Qiang; Qin, Zengguang

2017-01-01

A new technique of modulation index adjustment for pure wavelength modulation spectroscopy second harmonic signal waveforms recovery is presented. As the modulation index is a key parameter in determining the exact form of the signals generated by the technique of wavelength modulation spectroscopy, the method of modulation index adjustment is applied to recover the second harmonic signal with wavelength modulation spectroscopy. By comparing the measured profile with the theoretical profile by calculation, the relationship between the modulation index and average quantities of the scanning wavelength can be obtained. Furthermore, when the relationship is applied in the experimental setup by point-by-point modulation index modification for gas detection, the results show good agreement with the theoretical profile and signal waveform distortion (such as the amplitude modulation effect caused by diode laser) can be suppressed. Besides, the method of modulation index adjustment can be used in many other aspects which involve profile improvement. In practical applications, when the amplitude modulation effect can be neglected and the stability of the detection system is limited by the sampling rate of analog-to-digital, modulation index adjustment can be used to improve detection into softer inflection points and solve the insufficient sampling problem. As a result, measurement stability is improved by 40%. PMID:28098842

Developing and evaluating a target-background similarity metric for camouflage detection.

PubMed

Lin, Chiuhsiang Joe; Chang, Chi-Chan; Liu, Bor-Shong

2014-01-01

Measurement of camouflage performance is of fundamental importance for military stealth applications. The goal of camouflage assessment algorithms is to automatically assess the effect of camouflage in agreement with human detection responses. In a previous study, we found that the Universal Image Quality Index (UIQI) correlated well with the psychophysical measures, and it could be a potentially camouflage assessment tool. In this study, we want to quantify the camouflage similarity index and psychophysical results. We compare several image quality indexes for computational evaluation of camouflage effectiveness, and present the results of an extensive human visual experiment conducted to evaluate the performance of several camouflage assessment algorithms and analyze the strengths and weaknesses of these algorithms. The experimental data demonstrates the effectiveness of the approach, and the correlation coefficient result of the UIQI was higher than those of other methods. This approach was highly correlated with the human target-searching results. It also showed that this method is an objective and effective camouflage performance evaluation method because it considers the human visual system and image structure, which makes it consistent with the subjective evaluation results.

a New Multi-Spectral Threshold Normalized Difference Water Index Mst-Ndwi Water Extraction Method - a Case Study in Yanhe Watershed

NASA Astrophysics Data System (ADS)

Zhou, Y.; Zhao, H.; Hao, H.; Wang, C.

2018-05-01

Accurate remote sensing water extraction is one of the primary tasks of watershed ecological environment study. Since the Yanhe water system has typical characteristics of a small water volume and narrow river channel, which leads to the difficulty for conventional water extraction methods such as Normalized Difference Water Index (NDWI). A new Multi-Spectral Threshold segmentation of the NDWI (MST-NDWI) water extraction method is proposed to achieve the accurate water extraction in Yanhe watershed. In the MST-NDWI method, the spectral characteristics of water bodies and typical backgrounds on the Landsat/TM images have been evaluated in Yanhe watershed. The multi-spectral thresholds (TM1, TM4, TM5) based on maximum-likelihood have been utilized before NDWI water extraction to realize segmentation for a division of built-up lands and small linear rivers. With the proposed method, a water map is extracted from the Landsat/TM images in 2010 in China. An accuracy assessment is conducted to compare the proposed method with the conventional water indexes such as NDWI, Modified NDWI (MNDWI), Enhanced Water Index (EWI), and Automated Water Extraction Index (AWEI). The result shows that the MST-NDWI method generates better water extraction accuracy in Yanhe watershed and can effectively diminish the confusing background objects compared to the conventional water indexes. The MST-NDWI method integrates NDWI and Multi-Spectral Threshold segmentation algorithms, with richer valuable information and remarkable results in accurate water extraction in Yanhe watershed.

The Influence of Body Mass Index on Long-Term Fitness from Physical Education in Adolescent Girls

ERIC Educational Resources Information Center

Camhi, Sarah M.; Phillips, Jennie; Young, Deborah R.

2011-01-01

Background: Physical education (PE) can improve physical fitness; however, little research has evaluated PE's long-term influence. The purpose is to determine PE's longitudinal effects on fitness in a group of adolescent girls and to determine whether body mass index (BMI) status influenced any potential effects. Methods: Participants were…

Effects of carbohydrate quantity and glycemic index on resting metabolic rate and body composition during weight loss

USDA-ARS?s Scientific Manuscript database

Objective: To examine the effects of diets varying in carbohydrate and glycemic index (GI) on changes in body composition, resting metabolic rate (RMR), and metabolic adaptation during and after weight loss. Methods: Adults with obesity (n = 91) were randomized to one of four provided-food diets f...

Adjusting site index and age to account for genetic effects in yield equations for loblolly pine

Treesearch

Steven A. Knowe; G. Sam Foster

2010-01-01

Nine combinations of site index curves and age adjustments methods were evaluated for incorporating genetic effects for open-pollinated loblolly pine (Pinus taeda L.) families. An explicit yield system consisting of dominant height, basal area, and merchantable green weight functions was used to compare the accuracy of predictions associated with...

Peeking inside the "Black Box" of the Flynn Effect: Evidence from Three Wechsler Instruments

ERIC Educational Resources Information Center

Zhou, Xiaobin; Zhu, Jianjun; Weiss, Lawrence G.

2010-01-01

This study investigated the Wechsler Performance IQ (PIQ) or Perceptual Reasoning Index (PRI)/ Perceptual Organization Index (POI) change over time and its relation to ability levels. PIQ or PRI/ POI was analyzed because of the known sensitivity of nonverbal scales to the Flynn effect. Scores were analyzed using two methods. First, analysis of…

Two-Flux Method for Transient Radiative Transfer in a Semitransparent Layer

NASA Technical Reports Server (NTRS)

Siegel, Robert

1996-01-01

The two-flux method was used to obtain transient solutions for a plane layer including internal reflections and scattering. The layer was initially at uniform temperature, and was heated or cooled by external radiation and convection. The two-flux equations were examined as a means for evaluating the radiative flux gradient in the transient energy equation. Comparisons of transient temperature distributions using the two-flux method were made with results where the radiative flux gradient was evaluated from the exact radiative transfer equations. Good agreement was obtained for optical thicknesses from 0.5 to 5 and for refractive indices of 1 and 2. Illustrative results obtained with the two-flux method demonstrate the effect of isotropic scattering coupled with changing the refractive index. For small absorption with large scattering the maximum layer temperature is increased when the refractive index is increased. For larger absorption the effect is opposite, and the maximum temperature decreases with increased refractive index .

Photonic spin Hall effect enabled refractive index sensor using weak measurements.

PubMed

Zhou, Xinxing; Sheng, Lijuan; Ling, Xiaohui

2018-01-19

In this work, we theoretically propose an optical biosensor (consists of a BK7 glass, a metal film, and a graphene sheet) based on photonic spin Hall effect (SHE). We establish a quantitative relationship between the spin-dependent shift in photonic SHE and the refractive index of sensing medium. It is found that, by considering the surface plasmon resonance effect, the refractive index variations owing to the adsorption of biomolecules in sensing medium can effectively change the spin-dependent displacements. Remarkably, using the weak measurement method, this tiny spin-dependent shifts can be detected with a desirable accuracy so that the corresponding biomolecules concentration can be determined.

Broadening of polymer chromatographic signals: Analysis, quantification and correction through effective diffusion coefficients.

PubMed

Suárez, Inmaculada; Coto, Baudilio

2015-08-14

Average molecular weights and polydispersity indexes are some of the most important parameters considered in the polymer characterization. Usually, gel permeation chromatography (GPC) and multi angle light scattering (MALS) are used for this determination, but GPC values are overestimated due to the dispersion introduced by the column separation. Several procedures were proposed to correct such effect usually involving more complex calibration processes. In this work, a new method of calculation has been considered including diffusion effects. An equation for the concentration profile due to diffusion effects along the GPC column was considered to be a Fickian function and polystyrene narrow standards were used to determine effective diffusion coefficients. The molecular weight distribution function of mono and poly disperse polymers was interpreted as a sum of several Fickian functions representing a sample formed by only few kind of polymer chains with specific molecular weight and diffusion coefficient. Proposed model accurately fit the concentration profile along the whole elution time range as checked by the computed standard deviation. Molecular weights obtained by this new method are similar to those obtained by MALS or traditional GPC while polydispersity index values are intermediate between those obtained by the traditional GPC combined to Universal Calibration method and the MALS method. Values for Pearson and Lin coefficients shows improvement in the correlation of polydispersity index values determined by GPC and MALS methods when diffusion coefficients and new methods are used. Copyright © 2015 Elsevier B.V. All rights reserved.

A method of determining the refractive index of a prismatic lens.

PubMed

Buckley, John G

2010-01-01

A new method of measuring lens refractive index requiring immersion in solution and measuring lens power in air and in solution is extended. Prompted by a clinical need, the new method using lens power can be extended by applying it to prismatic power as well. This article provides a theoretical basis explaining why this can be done. The prismatic power of a prism is derived from first principles. Snell's Law and geometrical optics provide the framework for demonstrating the validity of the resulting formula. The sameness in formula derived using lens power or prism is shown, both from a paraxial and non-paraxial optics perspective. The effect of varying lens material and amount of prism is considered. The prismatic method described provides a useful alternative method of determining the refractive index of any lens. In some cases, it may be the only method available. Practitioners should consider when each method will provide optimal results.

Herpin effective media resonant underlayers and resonant overlayer designs for ultra-high NA interference lithography.

PubMed

Bourke, Levi; Blaikie, Richard J

2017-12-01

Dielectric waveguide resonant underlayers are employed in ultra-high NA interference photolithography to effectively double the depth of field. Generally a single high refractive index waveguiding layer is employed. Here multilayer Herpin effective medium methods are explored to develop equivalent multilayer waveguiding layers. Herpin equivalent resonant underlayers are shown to be suitable replacements provided at least one layer within the Herpin trilayer supports propagating fields. In addition, a method of increasing the intensity incident upon the photoresist using resonant overlayers is also developed. This method is shown to greatly enhance the intensity within the photoresist making the use of thicker, safer, non-absorbing, low refractive index matching liquids potentially suitable for large-scale applications.

Albedo and flux extinction coefficient of impure snow for diffuse shortwave radiation

NASA Technical Reports Server (NTRS)

Choudhury, B. J.; Mo, T.; Wang, J. R.; Chang, A. T. C.

1981-01-01

Impurities enter a snowpack as a result of fallout of scavenging by falling snow crystals. Albedo and flux extinction coefficient of soot contaminated snowcovers were studied using a two stream approximation of the radiative transfer equation. The effect of soot was calculated by two methods: independent scattering by ice grains and impurities and average refractive index for ice grains. Both methods predict a qualitatively similar effect of soot; the albedo is decreased and the extinction coefficient is increased compared to that for pure snow in the visible region; the infrared properties are largely unaffected. Quantitatively, however, the effect of soot is more pronounced in the average refractive index method. Soot contamination provides a qualitative explanation for several snow observations.

The Evaluation of Published Indexes, and Abstract Journals:, Criteria and Possible Procedures

PubMed Central

Lancaster, F. W.

1971-01-01

This paper describes possible criteria by which the effectiveness of a published index may be evaluated and suggest procedures that might be used to conduct an evaluation of a published index. The procedures were developed for the National Library of Medicine and relate specifically to the recurring bibliographies produced by MEDLARS in various specialized areas of biomedicine. The methods described should, however, be applicable to other printed indexes and abstract journals. Factors affecting the performance of a published index are also discussed and some research projects relevant to the evaluation of published indexes are reviewed. PMID:5146770

Kirchhoff Index of Cyclopolyacenes

NASA Astrophysics Data System (ADS)

Wang, Yan; Zhang, Wenwen

2010-10-01

The resistance distance between two vertices of a connected graph G is computed as the effective resistance between them in the corresponding network constructed from G by replacing each edge with a unit resistor. The Kirchhoff index of G is the sum of resistance distances between all pairs of vertices. In this paper, following the method of Y. J. Yang and H. P. Zhang in the proof of the Kirchhoff index of the linear hexagonal chain, we obtain the Kirchhoff index of cyclopolyacenes, denoted by HRn, in terms of its Laplacian spectrum. We show that the Kirchhoff index of HRnis approximately one third of its Wiener index.

Effect of Refractive Index of Substrate on Fabrication and Optical Properties of Hybrid Au-Ag Triangular Nanoparticle Arrays

PubMed Central

Liu, Jing; Chen, Yushan; Cai, Haoyuan; Chen, Xiaoyi; Li, Changwei; Yang, Cheng-Fu

2015-01-01

In this study, the nanosphere lithography (NSL) method was used to fabricate hybrid Au-Ag triangular periodic nanoparticle arrays. The Au-Ag triangular periodic arrays were grown on different substrates, and the effect of the refractive index of substrates on fabrication and optical properties was systematically investigated. At first, the optical spectrum was simulated by the discrete dipole approximation (DDA) numerical method as a function of refractive indexes of substrates and mediums. Simulation results showed that as the substrates had the refractive indexes of 1.43 (quartz) and 1.68 (SF5 glass), the nanoparticle arrays would have better refractive index sensitivity (RIS) and figure of merit (FOM). Simulation results also showed that the peak wavelength of the extinction spectra had a red shift when the medium’s refractive index n increased. The experimental results also demonstrated that when refractive indexes of substrates were 1.43 and 1.68, the nanoparticle arrays and substrate had better adhesive ability. Meanwhile, we found the nanoparticles formed a large-scale monolayer array with the hexagonally close-packed structure. Finally, the hybrid Au-Ag triangular nanoparticle arrays were fabricated on quartz and SF5 glass substrates and their experiment extinction spectra were compared with the simulated results.

Multiple-algorithm parallel fusion of infrared polarization and intensity images based on algorithmic complementarity and synergy

NASA Astrophysics Data System (ADS)

Zhang, Lei; Yang, Fengbao; Ji, Linna; Lv, Sheng

2018-01-01

Diverse image fusion methods perform differently. Each method has advantages and disadvantages compared with others. One notion is that the advantages of different image methods can be effectively combined. A multiple-algorithm parallel fusion method based on algorithmic complementarity and synergy is proposed. First, in view of the characteristics of the different algorithms and difference-features among images, an index vector-based feature-similarity is proposed to define the degree of complementarity and synergy. This proposed index vector is a reliable evidence indicator for algorithm selection. Second, the algorithms with a high degree of complementarity and synergy are selected. Then, the different degrees of various features and infrared intensity images are used as the initial weights for the nonnegative matrix factorization (NMF). This avoids randomness of the NMF initialization parameter. Finally, the fused images of different algorithms are integrated using the NMF because of its excellent data fusing performance on independent features. Experimental results demonstrate that the visual effect and objective evaluation index of the fused images obtained using the proposed method are better than those obtained using traditional methods. The proposed method retains all the advantages that individual fusion algorithms have.

a Framework of Change Detection Based on Combined Morphologica Features and Multi-Index Classification

NASA Astrophysics Data System (ADS)

Li, S.; Zhang, S.; Yang, D.

2017-09-01

Remote sensing images are particularly well suited for analysis of land cover change. In this paper, we present a new framework for detection of changing land cover using satellite imagery. Morphological features and a multi-index are used to extract typical objects from the imagery, including vegetation, water, bare land, buildings, and roads. Our method, based on connected domains, is different from traditional methods; it uses image segmentation to extract morphological features, while the enhanced vegetation index (EVI), the differential water index (NDWI) are used to extract vegetation and water, and a fragmentation index is used to the correct extraction results of water. HSV transformation and threshold segmentation extract and remove the effects of shadows on extraction results. Change detection is performed on these results. One of the advantages of the proposed framework is that semantic information is extracted automatically using low-level morphological features and indexes. Another advantage is that the proposed method detects specific types of change without any training samples. A test on ZY-3 images demonstrates that our framework has a promising capability to detect change.

International Roughness Index (IRI) measurement using Hilbert-Huang transform

NASA Astrophysics Data System (ADS)

Zhang, Wenjin; Wang, Ming L.

2018-03-01

International Roughness Index (IRI) is an important metric to measure condition of roadways. This index is usually used to justify the maintenance priority and scheduling for roadways. Various inspection methods and algorithms are used to assess this index through the use of road profiles. This study proposes to calculate IRI values using Hilbert-Huang Transform (HHT) algorithm. In particular, road profile data is provided using surface radar attached to a vehicle driving at highway speed. Hilbert-Huang transform (HHT) is used in this study because of its superior properties for nonstationary and nonlinear data. Empirical mode decomposition (EMD) processes the raw data into a set of intrinsic mode functions (IMFs), representing various dominating frequencies. These various frequencies represent noises from the body of the vehicle, sensor location, and the excitation induced by nature frequency of the vehicle, etc. IRI calculation can be achieved by eliminating noises that are not associated with the road profile including vehicle inertia effect. The resulting IRI values are compared favorably to the field IRI values, where the filtered IMFs captures the most characteristics of road profile while eliminating noises from the vehicle and the vehicle inertia effect. Therefore, HHT is an effect method for road profile analysis and for IRI measurement. Furthermore, the application of HHT method has the potential to eliminate the use of accelerometers attached to the vehicle as part of the displacement measurement used to offset the inertia effect.

High-precision diode-laser-based temperature measurement for air refractive index compensation.

PubMed

Hieta, Tuomas; Merimaa, Mikko; Vainio, Markku; Seppä, Jeremias; Lassila, Antti

2011-11-01

We present a laser-based system to measure the refractive index of air over a long path length. In optical distance measurements, it is essential to know the refractive index of air with high accuracy. Commonly, the refractive index of air is calculated from the properties of the ambient air using either Ciddor or Edlén equations, where the dominant uncertainty component is in most cases the air temperature. The method developed in this work utilizes direct absorption spectroscopy of oxygen to measure the average temperature of air and of water vapor to measure relative humidity. The method allows measurement of temperature and humidity over the same beam path as in optical distance measurement, providing spatially well-matching data. Indoor and outdoor measurements demonstrate the effectiveness of the method. In particular, we demonstrate an effective compensation of the refractive index of air in an interferometric length measurement at a time-variant and spatially nonhomogeneous temperature over a long time period. Further, we were able to demonstrate 7 mK RMS noise over a 67 m path length using a 120 s sample time. To our knowledge, this is the best temperature precision reported for a spectroscopic temperature measurement. © 2011 Optical Society of America

The Index cohesive effect on stock market correlations

NASA Astrophysics Data System (ADS)

Shapira, Y.; Kenett, D. Y.; Ben-Jacob, E.

2009-12-01

We present empirical examination and reassessment of the functional role of the market Index, using datasets of stock returns for eight years, by analyzing and comparing the results for two very different markets: 1) the New York Stock Exchange (NYSE), representing a large, mature market, and 2) the Tel Aviv Stock Exchange (TASE), representing a small, young market. Our method includes special collective (holographic) analysis of stock-Index correlations, of nested stock correlations (including the Index as an additional ghost stock) and of bare stock correlations (after subtraction of the Index return from the stocks returns). Our findings verify and strongly substantiate the assumed functional role of the index in the financial system as a cohesive force between stocks, i.e., the correlations between stocks are largely due to the strong correlation between each stock and the Index (the adhesive effect), rather than inter-stock dependencies. The Index adhesive and cohesive effects on the market correlations in the two markets are presented and compared in a reduced 3-D principal component space of the correlation matrices (holographic presentation). The results provide new insights into the interplay between an index and its constituent stocks in TASE-like versus NYSE-like markets.

A cloud-based framework for large-scale traditional Chinese medical record retrieval.

PubMed

Liu, Lijun; Liu, Li; Fu, Xiaodong; Huang, Qingsong; Zhang, Xianwen; Zhang, Yin

2018-01-01

Electronic medical records are increasingly common in medical practice. The secondary use of medical records has become increasingly important. It relies on the ability to retrieve the complete information about desired patient populations. How to effectively and accurately retrieve relevant medical records from large- scale medical big data is becoming a big challenge. Therefore, we propose an efficient and robust framework based on cloud for large-scale Traditional Chinese Medical Records (TCMRs) retrieval. We propose a parallel index building method and build a distributed search cluster, the former is used to improve the performance of index building, and the latter is used to provide high concurrent online TCMRs retrieval. Then, a real-time multi-indexing model is proposed to ensure the latest relevant TCMRs are indexed and retrieved in real-time, and a semantics-based query expansion method and a multi- factor ranking model are proposed to improve retrieval quality. Third, we implement a template-based visualization method for displaying medical reports. The proposed parallel indexing method and distributed search cluster can improve the performance of index building and provide high concurrent online TCMRs retrieval. The multi-indexing model can ensure the latest relevant TCMRs are indexed and retrieved in real-time. The semantics expansion method and the multi-factor ranking model can enhance retrieval quality. The template-based visualization method can enhance the availability and universality, where the medical reports are displayed via friendly web interface. In conclusion, compared with the current medical record retrieval systems, our system provides some advantages that are useful in improving the secondary use of large-scale traditional Chinese medical records in cloud environment. The proposed system is more easily integrated with existing clinical systems and be used in various scenarios. Copyright © 2017. Published by Elsevier Inc.

A discussion on validity of the diffusion theory by Monte Carlo method

NASA Astrophysics Data System (ADS)

Peng, Dong-qing; Li, Hui; Xie, Shusen

2008-12-01

Diffusion theory was widely used as a basis of the experiments and methods in determining the optical properties of biological tissues. A simple analytical solution could be obtained easily from the diffusion equation after a series of approximations. Thus, a misinterpret of analytical solution would be made: while the effective attenuation coefficient of several semi-infinite bio-tissues were the same, the distribution of light fluence in the tissues would be the same. In order to assess the validity of knowledge above, depth resolved internal fluence of several semi-infinite biological tissues which have the same effective attenuation coefficient were simulated with wide collimated beam in the paper by using Monte Carlo method in different condition. Also, the influence of bio-tissue refractive index on the distribution of light fluence was discussed in detail. Our results showed that, when the refractive index of several bio-tissues which had the same effective attenuation coefficient were the same, the depth resolved internal fluence would be the same; otherwise, the depth resolved internal fluence would be not the same. The change of refractive index of tissue would have affection on the light depth distribution in tissue. Therefore, the refractive index is an important optical property of tissue, and should be taken in account while using the diffusion approximation theory.

[Effect of 2 methods of occlusion adjustment on occlusal balance and muscles of mastication in patient with implant restoration].

PubMed

Wang, Rong; Xu, Xin

2015-12-01

To compare the effect of 2 methods of occlusion adjustment on occlusal balance and muscles of mastication in patients with dental implant restoration. Twenty patients, each with a single edentulous posterior dentition with no distal dentition were selected, and divided into 2 groups. Patients in group A underwent original occlusion adjustment method and patients in group B underwent occlusal plane reduction technique. Ankylos implants were implanted in the edentulous space in each patient and restored with fixed prosthodontics single unit crown. Occlusion was adjusted in each restoration accordingly. Electromyograms were conducted to determine the effect of adjustment methods on occlusion and muscles of mastication 3 months and 6 months after initial restoration and adjustment. Data was collected and measurements for balanced occlusal measuring standards were obtained, including central occlusion force (COF), asymmetry index of molar occlusal force(AMOF). Balanced muscles of mastication measuring standards were also obtained including measurements from electromyogram for the muscles of mastication and the anterior bundle of the temporalis muscle at the mandibular rest position, average electromyogram measurements of the anterior bundle of the temporalis muscle at the intercuspal position(ICP), Astot, masseter muscle asymmetry index, and anterior temporalis asymmetry index (ASTA). Statistical analysis was performed using Student 's t test with SPSS 18.0 software package. Three months after occlusion adjustment, parameters of the original occlusion adjustment method were significantly different between group A and group B in balanced occlusal measuring standards and balanced muscles of mastication measuring standards. Six months after occlusion adjustment, parameters of the original occlusion adjustment methods were significantly different between group A and group B in balanced muscles of mastication measuring standards, but was no significant difference in balanced occlusal measuring standards. Using occlusion plane reduction adjustment technique, it is possible to obtain occlusion index and muscles of mastication's electromyogram index similar to the opposite side's natural dentition in patients with single unit fix prosthodontics crown and single posterior edentulous dentition without distal dentitions.

Determining thickness and refractive index from free-standing ultra-thin polymer films with spectroscopic ellipsometry

DOE PAGES

Hilfiker, James N.; Stadermann, Michael; Sun, Jianing; ...

2016-08-27

It is a well-known challenge to determine refractive index (n) from ultra-thin films where the thickness is less than about 10 nm. In this paper, we discovered an interesting exception to this issue while characterizing spectroscopic ellipsometry (SE) data from isotropic, free-standing polymer films. Ellipsometry analysis shows that both thickness and refractive index can be independently determined for free-standing films as thin as 5 nm. Simulations further confirm an orthogonal separation between thickness and index effects on the experimental SE data. Effects of angle of incidence and wavelength on the data and sensitivity are discussed. Finally, while others have demonstratedmore » methods to determine refractive index from ultra-thin films, our analysis provides the first results to demonstrate high-sensitivity to the refractive index from ultra-thin layers.« less

An optimized time varying filtering based empirical mode decomposition method with grey wolf optimizer for machinery fault diagnosis

NASA Astrophysics Data System (ADS)

Zhang, Xin; Liu, Zhiwen; Miao, Qiang; Wang, Lei

2018-03-01

A time varying filtering based empirical mode decomposition (EMD) (TVF-EMD) method was proposed recently to solve the mode mixing problem of EMD method. Compared with the classical EMD, TVF-EMD was proven to improve the frequency separation performance and be robust to noise interference. However, the decomposition parameters (i.e., bandwidth threshold and B-spline order) significantly affect the decomposition results of this method. In original TVF-EMD method, the parameter values are assigned in advance, which makes it difficult to achieve satisfactory analysis results. To solve this problem, this paper develops an optimized TVF-EMD method based on grey wolf optimizer (GWO) algorithm for fault diagnosis of rotating machinery. Firstly, a measurement index termed weighted kurtosis index is constructed by using kurtosis index and correlation coefficient. Subsequently, the optimal TVF-EMD parameters that match with the input signal can be obtained by GWO algorithm using the maximum weighted kurtosis index as objective function. Finally, fault features can be extracted by analyzing the sensitive intrinsic mode function (IMF) owning the maximum weighted kurtosis index. Simulations and comparisons highlight the performance of TVF-EMD method for signal decomposition, and meanwhile verify the fact that bandwidth threshold and B-spline order are critical to the decomposition results. Two case studies on rotating machinery fault diagnosis demonstrate the effectiveness and advantages of the proposed method.

Broadband metamaterial lens antennas with special properties by controlling both refractive-index distribution and feed directivity

NASA Astrophysics Data System (ADS)

Ma, Qian; Shi, Chuan Bo; Chen, Tian Yi; Qing Qi, Mei; Li, Yun Bo; Cui, Tie Jun

2018-04-01

A new method is proposed to design gradient refractive-index metamaterial lens antennas by optimizing both the refractive-index distribution of the lens and the feed directivity. Comparing to the conventional design methods, source optimization provides a new degree of freedom to control aperture fields effectively. To demonstrate this method, two lenses with special properties based on this method are designed, to emit high-efficiency plane waves and fan-shaped beams, respectively. Both lenses have good performance and wide frequency band from 12 to 18 GHz, verifying the validity of the proposed method. The plane-wave emitting lens realized a high aperture efficiency of 75%, and the fan-beam lens achieved a high gain of 15 dB over board bandwidth. The experimental results have good agreement with the design targets and full-wave simulations.

Microcomputer software for calculating an elk habitat effectiveness index on Blue Mountain winter ranges.

Treesearch

Mark Hitchcock; Alan Ager

1992-01-01

National Forests in the Pacific Northwest Region have incorporated elk habitat standards into Forest plans to ensure that elk habitat objectives are met on multiple use land allocations. Many Forests have employed versions of the habitat effectiveness index (HEI) as a standard method to evaluate habitat. Field application of the HEI model unfortunately is a formidable...

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Investment threshold and management reflection for industrial system cleaning: a case for China.

PubMed

Fang, Yiping

2012-03-01

The recognition that industrial activity plays an essential role in a sustainable society is now widespread. To understand the causal relationship between industrial pollution abatement expenditure and industrial system cleaning level in China is of considerable importance, especially under extremely rapid industrial growth and serious pressure of industrial pollutants abatement context. We use composite index assessment method and regression analysis in this paper. We establish the mathematical model between composite industrial cleaner index and investment intensity for industrial pollutants abatement, and analyze the effects of industrial pollutants treatment and discharge indicators on composite industrial cleaner index in China. Results show that: (1) There is significant nonlinear relationship between composite industrial cleaner index and investment intensity for industrial pollutants abatement. (2) From single indicator perspective, the effect of investment intensity on pollutants treatment indicators is positively, on the contrary, the effect of investment intensity on pollutants discharge indicators is negatively; (3) From decomposition cleaner index perspective, the effect of pollutants discharge level (process control) is higher than pollutants treatment capacity (end-of-pipe) on composite industrial cleaner index; (4) There is threshold between investment intensity and composite cleaner industrial index, it is a crucial reference scale for industrial environmental management in selected period.

U.S. Geological Survey Near Real-Time Dst Index

USGS Publications Warehouse

Gannon, J.L.; Love, J.J.; Friberg, P.A.; Stewart, D.C.; Lisowski, S.W.

2011-01-01

The operational version of the United States Geological Survey one-minute Dst index (a global geomagnetic disturbance-intensity index for scientific studies and definition of space-weather effects) uses either four- or three-station input (including Honolulu, Hawaii; San Juan, Puerto Rico; Hermanus, South Africa; and Kakioka, Japan; or Honolulu, San Juan and Guam) and a method based on the U.S. Geological Survey definitive Dst index, in which Dst is more rigorously calculated. The method uses a combination of time-domain techniques and frequency-space filtering to produce the disturbance time series at an individual observatory. The operational output is compared to the U.S. Geological Survey one-minute Dst index (definitive version) and to the Kyoto (Japan) Final Dst to show that the U.S. Geological Survey operational output matches both definitive indices well.

Calibration of groundwater vulnerability mapping using the generalized reduced gradient method.

PubMed

Elçi, Alper

2017-12-01

Groundwater vulnerability assessment studies are essential in water resources management. Overlay-and-index methods such as DRASTIC are widely used for mapping of groundwater vulnerability, however, these methods mainly suffer from a subjective selection of model parameters. The objective of this study is to introduce a calibration procedure that results in a more accurate assessment of groundwater vulnerability. The improvement of the assessment is formulated as a parameter optimization problem using an objective function that is based on the correlation between actual groundwater contamination and vulnerability index values. The non-linear optimization problem is solved with the generalized-reduced-gradient (GRG) method, which is numerical algorithm based optimization method. To demonstrate the applicability of the procedure, a vulnerability map for the Tahtali stream basin is calibrated using nitrate concentration data. The calibration procedure is easy to implement and aims the maximization of correlation between observed pollutant concentrations and groundwater vulnerability index values. The influence of each vulnerability parameter in the calculation of the vulnerability index is assessed by performing a single-parameter sensitivity analysis. Results of the sensitivity analysis show that all factors are effective on the final vulnerability index. Calibration of the vulnerability map improves the correlation between index values and measured nitrate concentrations by 19%. The regression coefficient increases from 0.280 to 0.485. It is evident that the spatial distribution and the proportions of vulnerability class areas are significantly altered with the calibration process. Although the applicability of the calibration method is demonstrated on the DRASTIC model, the applicability of the approach is not specific to a certain model and can also be easily applied to other overlay-and-index methods. Copyright © 2017 Elsevier B.V. All rights reserved.

Calibration of groundwater vulnerability mapping using the generalized reduced gradient method

NASA Astrophysics Data System (ADS)

Elçi, Alper

2017-12-01

Groundwater vulnerability assessment studies are essential in water resources management. Overlay-and-index methods such as DRASTIC are widely used for mapping of groundwater vulnerability, however, these methods mainly suffer from a subjective selection of model parameters. The objective of this study is to introduce a calibration procedure that results in a more accurate assessment of groundwater vulnerability. The improvement of the assessment is formulated as a parameter optimization problem using an objective function that is based on the correlation between actual groundwater contamination and vulnerability index values. The non-linear optimization problem is solved with the generalized-reduced-gradient (GRG) method, which is numerical algorithm based optimization method. To demonstrate the applicability of the procedure, a vulnerability map for the Tahtali stream basin is calibrated using nitrate concentration data. The calibration procedure is easy to implement and aims the maximization of correlation between observed pollutant concentrations and groundwater vulnerability index values. The influence of each vulnerability parameter in the calculation of the vulnerability index is assessed by performing a single-parameter sensitivity analysis. Results of the sensitivity analysis show that all factors are effective on the final vulnerability index. Calibration of the vulnerability map improves the correlation between index values and measured nitrate concentrations by 19%. The regression coefficient increases from 0.280 to 0.485. It is evident that the spatial distribution and the proportions of vulnerability class areas are significantly altered with the calibration process. Although the applicability of the calibration method is demonstrated on the DRASTIC model, the applicability of the approach is not specific to a certain model and can also be easily applied to other overlay-and-index methods.

Double-Zero-Index Structural Phononic Waveguides

NASA Astrophysics Data System (ADS)

Zhu, Hongfei; Semperlotti, Fabio

2017-12-01

We report on the theoretical and experimental realization of a double-zero-index elastic waveguide and the corresponding acoustic cloaking and supercoupling effects. The proposed waveguide uses geometric tapers in order to induce Dirac-like cones at k → =0 due to accidental degeneracy. The nature of the degeneracy is explored by a k .p perturbation method adapted to thin structural waveguides. The results confirm the linear nature of the dispersion around the degeneracy and the possibility to map the material to effective-medium properties. Effective parameters numerically extracted using boundary medium theory confirm that the phononic waveguide maps into a double-zero-index material. Numerical and experimental results confirm the expected cloaking and supercoupling effects.

Backward and forward Monte Carlo method for vector radiative transfer in a two-dimensional graded index medium

NASA Astrophysics Data System (ADS)

Qian, Lin-Feng; Shi, Guo-Dong; Huang, Yong; Xing, Yu-Ming

2017-10-01

In vector radiative transfer, backward ray tracing is seldom used. We present a backward and forward Monte Carlo method to simulate vector radiative transfer in a two-dimensional graded index medium, which is new and different from the conventional Monte Carlo method. The backward and forward Monte Carlo method involves dividing the ray tracing into two processes backward tracing and forward tracing. In multidimensional graded index media, the trajectory of a ray is usually a three-dimensional curve. During the transport of a polarization ellipse, the curved ray trajectory will induce geometrical effects and cause Stokes parameters to continuously change. The solution processes for a non-scattering medium and an anisotropic scattering medium are analysed. We also analyse some parameters that influence the Stokes vector in two-dimensional graded index media. The research shows that the Q component of the Stokes vector cannot be ignored. However, the U and V components of the Stokes vector are very small.

Investigation of the Wave Propagation of Vector Modes of Light in a Spherically Symmetric Refractive Index Profile

NASA Astrophysics Data System (ADS)

Pozderac, Preston; Leary, Cody

We investigated the solutions to the Helmholtz equation in the case of a spherically symmetric refractive index using three different methods. The first method involves solving the Helmholtz equation for a step index profile and applying further constraints contained in Maxwell's equations. Utilizing these equations, we can simultaneously solve for the electric and magnetic fields as well as the allowed energies of photons propagating in this system. The second method applies a perturbative correction to these energies, which surfaces when deriving a Helmholtz type equation in a medium with an inhomogeneous refractive index. Applying first order perturbation theory, we examine how the correction term affects the energy of the photon. In the third method, we investigate the effects of the above perturbation upon solutions to the scalar Helmholtz equation, which are separable with respect to its polarization and spatial degrees of freedom. This work provides insights into the vector field structure of a photon guided by a glass microsphere.

Deformation of a Capsule in a Power-Law Shear Flow

PubMed Central

2016-01-01

An immersed boundary-lattice Boltzmann method is developed for fluid-structure interactions involving non-Newtonian fluids (e.g., power-law fluid). In this method, the flexible structure (e.g., capsule) dynamics and the fluid dynamics are coupled by using the immersed boundary method. The incompressible viscous power-law fluid motion is obtained by solving the lattice Boltzmann equation. The non-Newtonian rheology is achieved by using a shear rate-dependant relaxation time in the lattice Boltzmann method. The non-Newtonian flow solver is then validated by considering a power-law flow in a straight channel which is one of the benchmark problems to validate an in-house solver. The numerical results present a good agreement with the analytical solutions for various values of power-law index. Finally, we apply this method to study the deformation of a capsule in a power-law shear flow by varying the Reynolds number from 0.025 to 0.1, dimensionless shear rate from 0.004 to 0.1, and power-law index from 0.2 to 1.8. It is found that the deformation of the capsule increases with the power-law index for different Reynolds numbers and nondimensional shear rates. In addition, the Reynolds number does not have significant effect on the capsule deformation in the flow regime considered. Moreover, the power-law index effect is stronger for larger dimensionless shear rate compared to smaller values. PMID:27840656

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hilfiker, James N.; Stadermann, Michael; Sun, Jianing

It is a well-known challenge to determine refractive index (n) from ultra-thin films where the thickness is less than about 10 nm. In this paper, we discovered an interesting exception to this issue while characterizing spectroscopic ellipsometry (SE) data from isotropic, free-standing polymer films. Ellipsometry analysis shows that both thickness and refractive index can be independently determined for free-standing films as thin as 5 nm. Simulations further confirm an orthogonal separation between thickness and index effects on the experimental SE data. Effects of angle of incidence and wavelength on the data and sensitivity are discussed. Finally, while others have demonstratedmore » methods to determine refractive index from ultra-thin films, our analysis provides the first results to demonstrate high-sensitivity to the refractive index from ultra-thin layers.« less

Research on Centralized Voltage and Effective Inequality Identification Based on Circuit Analysis Method

NASA Astrophysics Data System (ADS)

Su, Yi; Wang, Feifeng; Lu, Yufeng; Huang, Huimin; Xia, Xiaofei

2017-09-01

This paper is based on affine function equation of the grid and OPF problem, discusses the equivalent of some inequality constraints variables optimizing. Further, we propose the model of injection current and set up the constraint sensitivity index of affine characteristics. The index can be used to identify the central point voltage and effective inequality of the system automatically. And then we can know how to compensate reactive power of the corresponding generator node and control the voltage to ensure the quality of the system voltage. When checking the effective inequalities we introduce cross-solving method of power flow. This provide a different idea for solving the power flow. The paper uses the results of the IEEE5 node examples to illustrate the validity and practicality of the proposed method.

Developing and Evaluating a Target-Background Similarity Metric for Camouflage Detection

PubMed Central

Lin, Chiuhsiang Joe; Chang, Chi-Chan; Liu, Bor-Shong

2014-01-01

Background Measurement of camouflage performance is of fundamental importance for military stealth applications. The goal of camouflage assessment algorithms is to automatically assess the effect of camouflage in agreement with human detection responses. In a previous study, we found that the Universal Image Quality Index (UIQI) correlated well with the psychophysical measures, and it could be a potentially camouflage assessment tool. Methodology In this study, we want to quantify the camouflage similarity index and psychophysical results. We compare several image quality indexes for computational evaluation of camouflage effectiveness, and present the results of an extensive human visual experiment conducted to evaluate the performance of several camouflage assessment algorithms and analyze the strengths and weaknesses of these algorithms. Significance The experimental data demonstrates the effectiveness of the approach, and the correlation coefficient result of the UIQI was higher than those of other methods. This approach was highly correlated with the human target-searching results. It also showed that this method is an objective and effective camouflage performance evaluation method because it considers the human visual system and image structure, which makes it consistent with the subjective evaluation results. PMID:24498310

Refractive index sensor based on the leaky radiation of a microfiber.

PubMed

Gao, F; Liu, H; Sheng, C; Zhu, C; Zhu, S N

2014-05-19

In this work we present a refractive index sensor based on the leaky radiation of a microfiber. The 5.3um diameter microfiber is fabricated by drawing a commercial optical fiber. When the microfiber is immersed into a liquid with larger refractive index than the effective index of fiber mode, the light will leak out through the leaky radiation process. The variation of refractive index of liquid can be monitored by measuring radiation angle of light. The refractive index sensitivity can be over 400 degree/RIU in theory. In the experiment, the variation value 0.001 of refractive index of liquid around this microfiber can be detected through this technique. This work provides a simple and sensitive method for refractive index sensing application.

An Effective Measured Data Preprocessing Method in Electrical Impedance Tomography

PubMed Central

Yu, Chenglong; Yue, Shihong; Wang, Jianpei; Wang, Huaxiang

2014-01-01

As an advanced process detection technology, electrical impedance tomography (EIT) has widely been paid attention to and studied in the industrial fields. But the EIT techniques are greatly limited to the low spatial resolutions. This problem may result from the incorrect preprocessing of measuring data and lack of general criterion to evaluate different preprocessing processes. In this paper, an EIT data preprocessing method is proposed by all rooting measured data and evaluated by two constructed indexes based on all rooted EIT measured data. By finding the optimums of the two indexes, the proposed method can be applied to improve the EIT imaging spatial resolutions. In terms of a theoretical model, the optimal rooting times of the two indexes range in [0.23, 0.33] and in [0.22, 0.35], respectively. Moreover, these factors that affect the correctness of the proposed method are generally analyzed. The measuring data preprocessing is necessary and helpful for any imaging process. Thus, the proposed method can be generally and widely used in any imaging process. Experimental results validate the two proposed indexes. PMID:25165735

Summary of water body extraction methods based on ZY-3 satellite

NASA Astrophysics Data System (ADS)

Zhu, Yu; Sun, Li Jian; Zhang, Chuan Yin

2017-12-01

Extracting from remote sensing images is one of the main means of water information extraction. Affected by spectral characteristics, many methods can be not applied to the satellite image of ZY-3. To solve this problem, we summarize the extraction methods for ZY-3 and analyze the extraction results of existing methods. According to the characteristics of extraction results, the method of WI& single band threshold and the method of texture filtering based on probability statistics are explored. In addition, the advantages and disadvantages of all methods are compared, which provides some reference for the research of water extraction from images. The obtained conclusions are as follows. 1) NIR has higher water sensitivity, consequently when the surface reflectance in the study area is less similar to water, using single band threshold method or multi band operation can obtain the ideal effect. 2) Compared with the water index and HIS optimal index method, object extraction method based on rules, which takes into account not only the spectral information of the water, but also space and texture feature constraints, can obtain better extraction effect, yet the image segmentation process is time consuming and the definition of the rules requires a certain knowledge. 3) The combination of the spectral relationship and water index can eliminate the interference of the shadow to a certain extent. When there is less small water or small water is not considered in further study, texture filtering based on probability statistics can effectively reduce the noises in result and avoid mixing shadows or paddy field with water in a certain extent.

A Multimetric Benthic Macroinvertebrate Index for the Assessment of Stream Biotic Integrity in Korea

PubMed Central

Jun, Yung-Chul; Won, Doo-Hee; Lee, Soo-Hyung; Kong, Dong-Soo; Hwang, Soon-Jin

2012-01-01

At a time when anthropogenic activities are increasingly disturbing the overall ecological integrity of freshwater ecosystems, monitoring of biological communities is central to assessing the health and function of streams. This study aimed to use a large nation-wide database to develop a multimetric index (the Korean Benthic macroinvertebrate Index of Biological Integrity—KB-IBI) applicable to the biological assessment of Korean streams. Reference and impaired conditions were determined based on watershed, chemical and physical criteria. Eight of an initial 34 candidate metrics were selected using a stepwise procedure that evaluated metric variability, redundancy, sensitivity and responsiveness to environmental gradients. The selected metrics were number of taxa, percent Ephemeroptera-Plecoptera-Trichoptera (EPT) individuals, percent of a dominant taxon, percent taxa abundance without Chironomidae, Shannon’s diversity index, percent gatherer individuals, ratio of filterers and scrapers, and the Korean saprobic index. Our multimetric index successfully distinguished reference from impaired conditions. A scoring system was established for each core metric using its quartile range and response to anthropogenic disturbances. The multimetric index was classified by aggregating the individual metric ..scores and the value range was quadrisected to provide a narrative criterion (Poor, Fair, Good and Excellent) to describe the biological integrity of the streams in the study. A validation procedure showed that the index is an effective method for evaluating stream conditions, and thus is appropriate for use in future studies measuring the long-term status of streams, and the effectiveness of restoration methods. PMID:23202765

Application of the network robustness index to identifying critical road-network links in Chittenden County, Vermont.

DOT National Transportation Integrated Search

2010-06-01

The purpose of this project is to conduct a pilot application of the Network : Robustness Index (NRI) for the Chittenden County Regional Transportation Model. : Using the results, improvements to the method to increase its effectiveness for more : wi...

Large Daily Stock Variation Is Associated with Cardiovascular Mortality in Two Cities of Guangdong, China

PubMed Central

Lin, Hualiang; Zhang, Yonghui; Xu, Yanjun; Liu, Tao; Xiao, Jianpeng; Luo, Yuan; Xu, Xiaojun; He, Yanhui; Ma, Wenjun

2013-01-01

Objective The current study aimed to examine the effects of daily change of the Shenzhen Stock Exchange Index on cardiovascular mortality in Guangzhou and Taishan, China. Methods Daily mortality and stock performance data during 2006–2010 were collected to construct the time series for the two cities. A distributed lag non-linear model was utilized to examine the effect of daily stock index changes on cardiovascular mortality after controlling for potential confounding factors. Results We observed a delayed non-linear effect of the stock index change on cardiovascular mortality: both rising and declining of the stock index were associated with increased cardiovascular deaths. In Guangzhou, the 15–25 lag days cumulative relative risk of an 800 index drop was 2.08 (95% CI: 1.38–3.14), and 2.38 (95% CI: 1.31–4.31) for an 800 stock index increase on the cardiovascular mortality, respectively. In Taishan, the cumulative relative risk over 15–25 days lag was 1.65 (95% CI: 1.13–2.42) for an 800 index drop and 2.08 (95% CI: 1.26–3.42) for an 800 index rising, respectively. Conclusions Large ups and downs in daily stock index might be important predictor of cardiovascular mortality. PMID:23874619

Graded-Index "Whispering-Gallery" Optical Microresonators

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Maleki, Lute; Iltchenko, Vladimir; Matsko, Andrey

2006-01-01

Graded-index-of-refraction dielectric optical microresonators have been proposed as a superior alternative to prior dielectric optical microresonators, which include microspheres and microtori wherein electromagnetic waves propagate along circumferential paths in "whispering-gallery" modes. The design and method of fabrication of the proposed microresonators would afford improved performance by exploiting a combination of the propagation characteristics of the whisperinggallery modes and the effect of a graded index of refraction on the modes.

Low-cost precision rotary index calibration

NASA Astrophysics Data System (ADS)

Ng, T. W.; Lim, T. S.

2005-08-01

The traditional method for calibrating angular indexing repeatability of rotary axes on machine tools and measuring equipment is with a precision polygon (usually 12 sided) and an autocollimator or angular interferometer. Such a setup is typically expensive. Here, we propose a far more cost-effective approach that uses just a laser, diffractive optical element, and CCD camera. We show that significantly high accuracies can be achieved for angular index calibration.

Optimal control of 2-wheeled mobile robot at energy performance index

NASA Astrophysics Data System (ADS)

Kaliński, Krzysztof J.; Mazur, Michał

2016-03-01

The paper presents the application of the optimal control method at the energy performance index towards motion control of the 2-wheeled mobile robot. With the use of the proposed method of control the 2-wheeled mobile robot can realise effectively the desired trajectory. The problem of motion control of mobile robots is usually neglected and thus performance of the realisation of the high level control tasks is limited.

A Multi-level Fuzzy Evaluation Method for Smart Distribution Network Based on Entropy Weight

NASA Astrophysics Data System (ADS)

Li, Jianfang; Song, Xiaohui; Gao, Fei; Zhang, Yu

2017-05-01

Smart distribution network is considered as the future trend of distribution network. In order to comprehensive evaluate smart distribution construction level and give guidance to the practice of smart distribution construction, a multi-level fuzzy evaluation method based on entropy weight is proposed. Firstly, focus on both the conventional characteristics of distribution network and new characteristics of smart distribution network such as self-healing and interaction, a multi-level evaluation index system which contains power supply capability, power quality, economy, reliability and interaction is established. Then, a combination weighting method based on Delphi method and entropy weight method is put forward, which take into account not only the importance of the evaluation index in the experts’ subjective view, but also the objective and different information from the index values. Thirdly, a multi-level evaluation method based on fuzzy theory is put forward. Lastly, an example is conducted based on the statistical data of some cites’ distribution network and the evaluation method is proved effective and rational.

Development of car theft crime index in peninsular Malaysia

NASA Astrophysics Data System (ADS)

Zulkifli, Malina; Ismail, Noriszura; Razali, Ahmad Mahir; Kasim, Maznah Mat

2014-06-01

Vehicle theft is classified as property crime and is considered as the most frequently reported crime in Malaysia. The rising number of vehicle thefts requires proper control by relevant authorities, especially through planning and implementation of strategic and effective measures. Nevertheless, the effort to control this crime would be much easier if there is an indication or index which is more specific to vehicle theft. This study aims to build an index crime which is specific to vehicle theft. The development of vehicle theft index proposed in this study requires three main steps; the first involves identification of criteria related to vehicle theft, the second requires calculation of degrees of importance, or weighting criteria, which involves application of correlation and entropy methods, and the final involves building of vehicle theft index using method of linear combination, or weighted arithmetic average. The results show that the two methods used for determining weights of vehicle theft index are similar. Information generated from the results can be used as a primary source for local authorities to plan strategies for reduction of vehicle theft and for insurance companies to determine premium rates of automobile insurance.

Evaluation of Catalytic Effects of Chymotrypsin and Cu2+ for Development of UV-Spectroscopic Method for Gelatin-Source Differentiation.

PubMed

Hamizah, Anis; Hammed, Ademola Monsur; Asiyanbi-H, Tawakalit Tope; Mirghani, Mohamed Elwathig Saeed; Jaswir, Irwandi; Ahamad Fadzillah, Nurrulhidayah Binti

2017-01-01

The consumers interest in gelatin authentication is high due to allergic reactions and adoption of Halal and Kosher eating cultures. This research investigated browning development due to enzymatic hydrolysis and presence of Cu 2+ during Maillard reaction of fish, porcine, and bovine gelatin. The rate of browning index samples showed two phases-rapid and slow-for all the gelatin samples and changes in browning index (Δ B index ) were increased (>100%) in presence of Cu 2+ . Δ B index of enzymatic hydrolysates were different among the gelatin species. Fish gelatin hydrolyzate displayed > 400% increase in browning in the first six hours compared to gelatin hydrolyzates from porcine (200%) and bovine (140%). The variation in Δ B index of chymotrypsin digested gelatin in presence of Cu 2+ could be valuable for the development of an efficient UV-spectroscopic method for gelatin differentiation.

A new comprehensive index for drought monitoring with TM data

NASA Astrophysics Data System (ADS)

Wang, Yuanyuan

2017-10-01

Drought is one of the most important and frequent natural hazards to agriculture production in North China Plain. To improve agriculture water management, accurate drought monitoring information is needed. This study proposed a method for comprehensive drought monitoring by combining a meteorological index and three satellite drought indices of TM data together. SPI (Standard Precipitation Index), the meteorological drought index, is used to measure precipitation deficiency. Three satellite drought indices (Temperature Vegetation Drought Index, Land Surface Water Index, Modified Perpendicular Drought Index) are used to evaluate agricultural drought risk by exploring data from various channels (VIS, NIR, SWIR, TIR). Considering disparities in data ranges of different drought indices, normalization is implemented before combination. First, SPI is normalized to 0 — 100 given that its normal range is -4 - +4. Then, the three satellite drought indices are normalized to 0 - 100 according to the maximum and minimum values in the image, and aggregated using weighted average method (the result is denoted as ADI, Aggregated drought index). Finally, weighed geometric mean of SPI and ADI are calculated (the result is denoted as DIcombined). A case study in North China plain using three TM images acquired during April-May 2007 show that the method proposed in this study is effective. In spatial domain, DIcombined demonstrates dramatically more details than SPI; in temporal domain, DIcombined shows more reasonable drought development trajectory than satellite indices that are derived from independent TM images.

Measuring Gap Fraction, Element Clumping Index and LAI in Sierra Forest Stands Using a Full-Waveform Ground-Based Lidar

NASA Technical Reports Server (NTRS)

Zhao, Feng; Strahler, Alan H.; Crystal L. Schaaf; Yao, Tian; Yang, Xiaoyuan; Wang, Zhuosen; Schull, Mitchell A.; Roman, Miguel O.; Woodcock, Curtis E.; Olofsson, Pontus;

Media effects on suicide methods: A case study on Hong Kong 1998-2005.

PubMed

Cheng, Qijin; Chen, Feng; Yip, Paul S F

2017-01-01

Previous studies have suggested that mass media's reports of new suicide methods will increase suicides using the same method. The same pattern seems not to apply to a conventional suicide method, unless it was used by a celebrity. 1) to examine media effects on both new and non-new suicide methods during 1998 and 2005 in Hong Kong (HK), when a new method by burning charcoal (CB suicide) was spreading in the region. 2) to examine how CB competed with non-CB methods in terms of media coverage and "recruiting" suicidal persons in the socio-economic context. A self- and mutual- exciting process model was fitted to the data, adjusting for divorce rate, unemployment rate, and property price index. Breaking the whole period into onset, peak, and post-peak stages, the model was fitted again to examine the differences. Comparable copycat effects were found on both CB and non-CB suicide news. The only cross-method media effects were found in the onset stage when non-CB suicide news showed suppressing effect on CB suicides. CB suicides reported a significant self-excitation effect. A higher divorce rate and lower property price index were associated with significantly more suicides incidences and more suicide news. The emerging of CB suicide method did not substitute media coverage of non-CB suicide in HK. Media effects in this case were not limited to new suicide method or celebrity suicide. The effects were further fueled by adverse socio-economic conditions.

Construction of prediction intervals for Palmer Drought Severity Index using bootstrap

NASA Astrophysics Data System (ADS)

Beyaztas, Ufuk; Bickici Arikan, Bugrayhan; Beyaztas, Beste Hamiye; Kahya, Ercan

2018-04-01

In this study, we propose an approach based on the residual-based bootstrap method to obtain valid prediction intervals using monthly, short-term (three-months) and mid-term (six-months) drought observations. The effects of North Atlantic and Arctic Oscillation indexes on the constructed prediction intervals are also examined. Performance of the proposed approach is evaluated for the Palmer Drought Severity Index (PDSI) obtained from Konya closed basin located in Central Anatolia, Turkey. The finite sample properties of the proposed method are further illustrated by an extensive simulation study. Our results revealed that the proposed approach is capable of producing valid prediction intervals for future PDSI values.

All-dielectric three-dimensional broadband Eaton lens with large refractive index range

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, Ming; Yong Tian, Xiao, E-mail: leoxyt@mail.xjtu.edu.cn; Ling Wu, Ling

2014-03-03

We proposed a method to realize three-dimensional (3D) gradient index (GRIN) devices requiring large refractive index (RI) range with broadband performance. By combining non-resonant GRIN woodpile photonic crystals structure in the metamaterial regime with a compound liquid medium, a wide RI range (1–6.32) was fulfilled flexibly. As a proof-of-principle for the low-loss and non-dispersive method, a 3D Eaton lens was designed and fabricated based on 3D printing process. Full-wave simulation and experiment validated its omnidirectional wave bending effects in a broad bandwidth covering Ku band (12 GHz–18 GHz)

Evaluation of a simple method for the automatic assignment of MeSH descriptors to health resources in a French online catalogue.

PubMed

Névéol, Aurélie; Pereira, Suzanne; Kerdelhué, Gaetan; Dahamna, Badisse; Joubert, Michel; Darmoni, Stéfan J

2007-01-01

The growing number of resources to be indexed in the catalogue of online health resources in French (CISMeF) calls for curating strategies involving automatic indexing tools while maintaining the catalogue's high indexing quality standards. To develop a simple automatic tool that retrieves MeSH descriptors from documents titles. In parallel to research on advanced indexing methods, a bag-of-words tool was developed for timely inclusion in CISMeF's maintenance system. An evaluation was carried out on a corpus of 99 documents. The indexing sets retrieved by the automatic tool were compared to manual indexing based on the title and on the full text of resources. 58% of the major main headings were retrieved by the bag-of-words algorithm and the precision on main heading retrieval was 69%. Bag-of-words indexing has effectively been used on selected resources to be included in CISMeF since August 2006. Meanwhile, on going work aims at improving the current version of the tool.

Effects of Storytelling-Based Education in the Prevention of Drug Abuse among Adolescents in Iran Based on a Readiness to Addiction Index.

PubMed

Moghadam, Mahdieh Poodineh; Sari, Mahdieh; Balouchi, Abbas; Madarshahian, Farah; Moghadam, Khadijeh

2016-11-01

One of the most effective strategies in the prevention of addiction is increasing awareness among young people, towards the tendency for taking drugs their physical, mental and social side effects. Storytelling is effective for increasing characteristics of happiness and resilience. This study uses storytelling, a common and popular method to increase awareness among adolescents. To examine the effect of storytelling-based education on the prevention of drug abuse, based on a readiness to addiction index. This quasi-experimental study was conducted on 136 high school students (grade one), selected by a cluster sampling procedure from May 2014 to February 2015 in Zabol, Iran. The instrument for gathering data was a readiness to addiction questionnaire. This questionnaire included 41 items for which the scoring of each item followed the Likerts format. The data gathered was analysed using SPSS version 21 with descriptive statistics and inferential statistics. The results revealed that the mean of the readiness to addiction index in the case group fell from 75.66±19.99 to 69.57±21.83 (paired t-test; p =0.02); in the control group the same index changed from 103.01±21.88 to 93.98±27.70 (paired t-test, p = 0.775). That is, the index decreased for both groups, but the reduction was statistically significant only for the case group (p =0.02). This suggests that the narrative method is effective in reducing adolescents readiness to addiction. Storytelling is an effective way to raise awareness among young people about addiction and its detrimental impacts on health. Therefore, such a technique can be taken into consideration in teaching principles of prevention.

[Evaluating the Significance of Odor Gas Released During the Directly Drying Process of Sludge: Based on the Multi-index Integrated Assessment Method].

PubMed

Ding, Wen-jie; Chen, Wen-he; Deng, Ming-jia; Luo, Hui; Li, Lin; Liu, Jun-xin

2016-02-15

Co-processing of sewage sludge using the cement kiln can realize sludge harmless treatment, quantity reduction, stabilization and reutilization. The moisture content should be reduced to below 30% to meet the requirement of combustion. Thermal drying is an effective way for sludge desiccation. Odors and volatile organic compounds are generated and released during the sludge drying process, which could lead to odor pollution. The main odor pollutants were selected by the multi-index integrated assessment method. The concentration, olfactory threshold, threshold limit value, smell security level and saturated vapor pressure were considered as indexes based on the related regulations in China and foreign countries. Taking the pollution potential as the evaluation target, and the risk index and odor emission intensity as evaluation indexes, the odor pollution potential rated evaluation model of the pollutants was built according to the Weber-Fechner law. The aim of the present study is to form the rating evaluation method of odor potential pollution capacity suitable for the directly drying process of sludge.

Objective evaluation of interior noise booming in a passenger car based on sound metrics and artificial neural networks.

PubMed

Lee, Hyun-Ho; Lee, Sang-Kwon

2009-09-01

Booming sound is one of the important sounds in a passenger car. The aim of the paper is to develop the objective evaluation method of interior booming sound. The development method is based on the sound metrics and ANN (artificial neural network). The developed method is called the booming index. Previous work maintained that booming sound quality is related to loudness and sharpness--the sound metrics used in psychoacoustics--and that the booming index is developed by using the loudness and sharpness for a signal within whole frequency between 20 Hz and 20 kHz. In the present paper, the booming sound quality was found to be effectively related to the loudness at frequencies below 200 Hz; thus the booming index is updated by using the loudness of the signal filtered by the low pass filter at frequency under 200 Hz. The relationship between the booming index and sound metric is identified by an ANN. The updated booming index has been successfully applied to the objective evaluation of the booming sound quality of mass-produced passenger cars.

An evaluation of a weaning index for wild fishers (Pekania [Martes] pennanti) in California

Treesearch

Sean M. Matthews; J. Mark Higley; John T. Finn; Kerry M. Rennie; Craig M. Thompson; Kathryn L. Purcell; Rick A. Sweitzer; Sandra L. Haire; Paul R. Sievert; Todd K. Fuller

2013-01-01

Conservation concern for fishers (Pekania [Martes] pennanti) in the Pacific states has highlighted a need to develop cost-effective methods of monitoring reproduction in extant and reintroduced fisher populations. We evaluated the efficacy of nipple size as a predictive index of weaning success for females...

Foaming Index of CaO-SiO2-FeO-MgO Slag System

NASA Astrophysics Data System (ADS)

Park, Youngjoo; Min, Dong Joon

A study on the effect of FeO and MgO content on foaming index in EAF slag system was carried out. The height of the slag foam was measured by electric probe maintaining steady state in gas formation and escape. Foaming index, which is the measurement of gas capturing potential of the slag, is calculated from the foam height and gas flow rate. Viscosity and surface tension, which are the key properties for the foaming index, are calculated by Urbain's model and additive method, respectively. Dimensional analysis also performed to determine the dominancy of properties and resulted that the important factor was a ratio between viscosity and surface tension. The effect of each component on the viscosity, surface tension and foaming index of the slag is evaluated to be in strong relationship.

Linear Matrix Inequality Method for a Quadratic Performance Index Minimization Problem with a class of Bilinear Matrix Inequality Conditions

NASA Astrophysics Data System (ADS)

Tanemura, M.; Chida, Y.

2016-09-01

There are a lot of design problems of control system which are expressed as a performance index minimization under BMI conditions. However, a minimization problem expressed as LMIs can be easily solved because of the convex property of LMIs. Therefore, many researchers have been studying transforming a variety of control design problems into convex minimization problems expressed as LMIs. This paper proposes an LMI method for a quadratic performance index minimization problem with a class of BMI conditions. The minimization problem treated in this paper includes design problems of state-feedback gain for switched system and so on. The effectiveness of the proposed method is verified through a state-feedback gain design for switched systems and a numerical simulation using the designed feedback gains.

Beyond the floor effect on the Wechsler Intelligence Scale for Children--4th Ed. (WISC-IV): calculating IQ and Indexes of subjects presenting a floored pattern of results.

PubMed

Orsini, A; Pezzuti, L; Hulbert, S

2015-05-01

It is now widely known that children with severe intellectual disability show a 'floor effect' on the Wechsler scales. This effect emerges because the practice of transforming raw scores into scaled scores eliminates any variability present in participants with low intellectual ability and because intelligence quotient (IQ) scores are limited insofar as they do not measure scores lower than 40. Following Hessl et al.'s results, the present authors propose a method for the computation of the Wechsler Intelligence Scale for Children--4th Ed. (WISC-IV)'s IQ and Indexes in intellectually disabled participants affected by a floored pattern of results. The Italian standardization sample (n = 2200) for the WISC-IV was used. The method presented in this study highlights the limits of the 'floor effect' of the WISC-IV in children with serious intellectual disability who present a profile with weighted scores of 1 in all the subtests despite some variability in the raw scores. Such method eliminates the floor effect of the scale and therefore makes it possible to analyse the strengths and weaknesses of the WISC-IV's Indexes in these participants. The Authors reflect on clinical utility of this method and on the meaning of raw score of 0 on subtest. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Relationship of visfatin level to pancreatic endocrine hormone level, HOMA-IR index, and HOMA β-cell index in overweight women who performed hydraulic resistance exercise.

PubMed

Ha, Chang Ho; Swearingin, Brenda; Jeon, Yong Kyun

2015-09-01

[Purpose] This study aimed to examine the correlation of visfatin level to pancreatic endocrine hormone level, homeostasis model assessment of insulin resistance (HOMA-IR) index, and HOMA β-cell index in hydraulic resistance exercise. Furthermore, it investigated the relationship between visfatin level and other variables affected by exercise in overweight women. [Subjects and Methods] The exercise group trained for 12 weeks, 70 minutes/day, 5 days/week. Visfatin level, pancreatic endocrine hormone level, HOMA-IR index, and HOMA β-cell index were measured before and after the intervention. Based on the blood insulin and glucose concentrations, HOMA-IR index, the indicator of insulin resistance, and HOMA β-cell index, the indicator of insulin secretion level, were assessed. [Results] Interaction effects on visfatin level, insulin level, HOMA-IR index, and HOMA β-cell index were observed. Interaction effects on glucagon and glucose levels were not observed between the intervention groups. The correlations of visfatin level to insulin, glucagon, and glucose levels, and HOMA-IR and HOMA β-cell indexes were not significant for any of the subjects. [Conclusion] Therefore, the 12-week resistance exercise affected body composition, visfatin level, insulin level, HOMA-IR index, and HOMA β-cell index. Finally, visfatin was not related to insulin, glucagon, and glucose levels, and HOMA-IR and HOMA β-cell indexes.

A Granular Self-Organizing Map for Clustering and Gene Selection in Microarray Data.

PubMed

Ray, Shubhra Sankar; Ganivada, Avatharam; Pal, Sankar K

2016-09-01

A new granular self-organizing map (GSOM) is developed by integrating the concept of a fuzzy rough set with the SOM. While training the GSOM, the weights of a winning neuron and the neighborhood neurons are updated through a modified learning procedure. The neighborhood is newly defined using the fuzzy rough sets. The clusters (granules) evolved by the GSOM are presented to a decision table as its decision classes. Based on the decision table, a method of gene selection is developed. The effectiveness of the GSOM is shown in both clustering samples and developing an unsupervised fuzzy rough feature selection (UFRFS) method for gene selection in microarray data. While the superior results of the GSOM, as compared with the related clustering methods, are provided in terms of β -index, DB-index, Dunn-index, and fuzzy rough entropy, the genes selected by the UFRFS are not only better in terms of classification accuracy and a feature evaluation index, but also statistically more significant than the related unsupervised methods. The C-codes of the GSOM and UFRFS are available online at http://avatharamg.webs.com/software-code.

[The study of establishment of the " Chinese provincial Blindness prevention technical guidance group performance evaluation system"].

PubMed

Lu, L N; He, X G; Zhu, J F; Xu, X; Zhang, R; Hu, X; Zou, H D

2016-11-11

Objective: To establish an assessment system, including indexes and scoring methods, that can be used for performance evaluation of the provincial blindness prevention technical guidance group properly and effectively . Methods: The indexes and scoring methods were set based on the core content of The " National Plan of Prevention and Treatment of Blindness (2012-2015)" , the specific requirement and target of the World Health Organization (WHO) "For the General Eye Health: Global plan of Action (2014-2019)" , and the current situation of the China's provinces and autonomous regions. These indexes should be of effectiveness, feasibility, comparability, guidance and advancing. Formed by a literature review of candidate indicators, the framework of the system is built by qualitative assessment. With the Delphi method, the system was further revised and improved. Empirical pilot study was then used to prove the feasibility, followed by the final qualitative analysis that establish the " Chinese provincial Blindness prevention technical guidance group performance evaluation system" . Results: Through the literature review and qualitative assessment, a six dimensional system framework was built, including 6 first-level indicators, 16 second-level indicators, and 29 third-level indicators through Delphi method evaluation. With the variation coefficient method, the coeffiences of the first-level index weight were calculated as: Organization and management 0.15, Development and implementation of blindness prevention plans 0.15, Implementation of blindness prevention projects 0.14, Training 0.17, Health education 0.18, and Cooperation and exchanges 0.21. The specific scoring method for this system is confirmed as: data and files check, field interview, and record interview, sampling investigation. Empirical pilot study was conducted in the Jilin, Guizhou and Gansu provinces, and the self-assessment results from local experts were consistent with the scores from the systems. Conclusion: This system established is appropriate at current time, and it can effectively evaluate the performance of the Chinese provincial Blindness prevention technical guidance group. (Chin J Ophthalmol, 2016, 52:814-824) .

Effect of the refractive index on the hawking temperature: an application of the Hamilton-Jacobi method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sakalli, I., E-mail: izzet.sakalli@emu.edu.tr; Mirekhtiary, S. F., E-mail: fatemeh.mirekhtiary@emu.edu.tr

2013-10-15

Hawking radiation of a non-asymptotically flat 4-dimensional spherically symmetric and static dilatonic black hole (BH) via the Hamilton-Jacobi (HJ) method is studied. In addition to the naive coordinates, we use four more different coordinate systems that are well-behaved at the horizon. Except for the isotropic coordinates, direct computation by the HJ method leads to the standard Hawking temperature for all coordinate systems. The isotropic coordinates allow extracting the index of refraction from the Fermat metric. It is explicitly shown that the index of refraction determines the value of the tunneling rate and its natural consequence, the Hawking temperature. The isotropicmore » coordinates in the conventional HJ method produce a wrong result for the temperature of the linear dilaton. Here, we explain how this discrepancy can be resolved by regularizing the integral possessing a pole at the horizon.« less

Apparatus and method for quantitative assay of samples of transuranic waste contained in barrels in the presence of matrix material

DOEpatents

Caldwell, J.T.; Herrera, G.C.; Hastings, R.D.; Shunk, E.R.; Kunz, W.E.

1987-08-28

Apparatus and method for performing corrections for matrix material effects on the neutron measurements generated from analysis of transuranic waste drums using the differential-dieaway technique. By measuring the absorption index and the moderator index for a particular drum, correction factors can be determined for the effects of matrix materials on the ''observed'' quantity of fissile and fertile material present therein in order to determine the actual assays thereof. A barrel flux monitor is introduced into the measurement chamber to accomplish these measurements as a new contribution to the differential-dieaway technology. 9 figs.

Matrix method for two-dimensional waveguide mode solution

NASA Astrophysics Data System (ADS)

Sun, Baoguang; Cai, Congzhong; Venkatesh, Balajee Seshasayee

2018-05-01

In this paper, we show that the transfer matrix theory of multilayer optics can be used to solve the modes of any two-dimensional (2D) waveguide for their effective indices and field distributions. A 2D waveguide, even composed of numerous layers, is essentially a multilayer stack and the transmission through the stack can be analysed using the transfer matrix theory. The result is a transfer matrix with four complex value elements, namely A, B, C and D. The effective index of a guided mode satisfies two conditions: (1) evanescent waves exist simultaneously in the first (cladding) layer and last (substrate) layer, and (2) the complex element D vanishes. For a given mode, the field distribution in the waveguide is the result of a 'folded' plane wave. In each layer, there is only propagation and absorption; at each boundary, only reflection and refraction occur, which can be calculated according to the Fresnel equations. As examples, we show that this method can be used to solve modes supported by the multilayer step-index dielectric waveguide, slot waveguide, gradient-index waveguide and various plasmonic waveguides. The results indicate the transfer matrix method is effective for 2D waveguide mode solution in general.

Mach-Zehnder interferometer implementation for thermo-optical and Kerr effect study

NASA Astrophysics Data System (ADS)

Bundulis, Arturs; Nitiss, Edgars; Busenbergs, Janis; Rutkis, Martins

2018-04-01

In this paper, we propose the Mach-Zehnder interferometric method for third-order nonlinear optical and thermo-optical studies. Both effects manifest themselves as refractive index dependence on the incident light intensity and are widely employed for multiple opto-optical and thermo-optical applications. With the implemented method, we have measured the Kerr and thermo-optical coefficients of chloroform under CW, ns and ps laser irradiance. The application of lasers with different light wavelengths, pulse duration and energy allowed us to distinguish the processes responsible for refractive index changes in the investigated solution. Presented setup was also used for demonstration of opto-optical switching. Results from Mach-Zehnder experiment were compared to Z-scan data obtained in our previous studies. Based on this, a quality comparison of both methods was assessed and advantages and disadvantages of each method were analyzed.

Air Pollution Translations: A Bibliography with Abstracts - Volume 2.

ERIC Educational Resources Information Center

National Air Pollution Control Administration (DHEW), Raleigh, NC.

This volume is the second in a series of compilations presenting abstracts and indexes of translations of technical air pollution literature. The 444 entries are grouped into 12 subject categories: General; Emission Sources; Atmospheric Interaction; Measurement Methods; Control Methods; Effects--Human Health; Effects--Plants and Livestock;…

Media effects on suicide methods: A case study on Hong Kong 1998-2005

PubMed Central

Cheng, Qijin; Chen, Feng; Yip, Paul S. F.

2017-01-01

Background Previous studies have suggested that mass media’s reports of new suicide methods will increase suicides using the same method. The same pattern seems not to apply to a conventional suicide method, unless it was used by a celebrity. Objective 1) to examine media effects on both new and non-new suicide methods during 1998 and 2005 in Hong Kong (HK), when a new method by burning charcoal (CB suicide) was spreading in the region. 2) to examine how CB competed with non-CB methods in terms of media coverage and “recruiting” suicidal persons in the socio-economic context. Methods A self- and mutual- exciting process model was fitted to the data, adjusting for divorce rate, unemployment rate, and property price index. Breaking the whole period into onset, peak, and post-peak stages, the model was fitted again to examine the differences. Results Comparable copycat effects were found on both CB and non-CB suicide news. The only cross-method media effects were found in the onset stage when non-CB suicide news showed suppressing effect on CB suicides. CB suicides reported a significant self-excitation effect. A higher divorce rate and lower property price index were associated with significantly more suicides incidences and more suicide news. Conclusions The emerging of CB suicide method did not substitute media coverage of non-CB suicide in HK. Media effects in this case were not limited to new suicide method or celebrity suicide. The effects were further fueled by adverse socio-economic conditions. PMID:28403231

Analyzing refractive index profiles of confined fluids by interferometry.

PubMed

Kienle, Daniel F; Kuhl, Tonya L

2014-12-02

This work describes an interferometry data analysis method for determining the optical thickness of thin films or any variation in the refractive index of a fluid or film near a surface. In particular, the method described is applied to the analysis of interferometry data taken with a surface force apparatus (SFA). The technique does not require contacting or confining the fluid or film. By analyzing interferometry data taken at many intersurface separation distances out to at least 300 nm, the properties of a film can be quantitatively determined. The film can consist of material deposited on the surface, like a polymer brush, or variation in a fluid's refractive index near a surface resulting from, for example, a concentration gradient, depletion in density, or surface roughness. The method is demonstrated with aqueous polyethylenimine (PEI) adsorbed onto mica substrates, which has a large concentration and therefore refractive index gradient near the mica surface. The PEI layer thickness determined by the proposed method is consistent with the thickness measured by conventional SFA methods. Additionally, a thorough investigation of the effects of random and systematic error in SFA data analysis and modeling via simulations of interferometry is described in detail.

Comparison and evaluation of fusion methods used for GF-2 satellite image in coastal mangrove area

NASA Astrophysics Data System (ADS)

Ling, Chengxing; Ju, Hongbo; Liu, Hua; Zhang, Huaiqing; Sun, Hua

2018-04-01

GF-2 satellite is the highest spatial resolution Remote Sensing Satellite of the development history of China's satellite. In this study, three traditional fusion methods including Brovey, Gram-Schmidt and Color Normalized (CN were used to compare with the other new fusion method NNDiffuse, which used the qualitative assessment and quantitative fusion quality index, including information entropy, variance, mean gradient, deviation index, spectral correlation coefficient. Analysis results show that NNDiffuse method presented the optimum in qualitative and quantitative analysis. It had more effective for the follow up of remote sensing information extraction and forest, wetland resources monitoring applications.

Body Mass Index, Nutrient Intakes, Health Behaviours and Nutrition Knowledge: A Quantile Regression Application in Taiwan

ERIC Educational Resources Information Center

Chen, Shih-Neng; Tseng, Jauling

2010-01-01

Objective: To assess various marginal effects of nutrient intakes, health behaviours and nutrition knowledge on the entire distribution of body mass index (BMI) across individuals. Design: Quantitative and distributional study. Setting: Taiwan. Methods: This study applies Becker's (1965) model of health production to construct an individual's BMI…

Determination of Factors Effected Dietary Glycemic Index in Turkish University Students

ERIC Educational Resources Information Center

Gumus, Huseyin; Akdevelioglu, Yasemin; Bulduk, Sidika

2014-01-01

We aimed to determine how factors such as smoking, regular activity, etc. affected dietary glycemic index in university students. Methods: This study was carried out at Gazi University, Ankara, Turkey. The participants were 577 randomly selected Turkish healthy female university students aged 17-32 years. The survey included a questionnaire that…

Measurement of the index of refraction of μm crystals by a confocal laser microscope--potential application for the refractive index mapping of μm scale.

PubMed

Kimura, Keisaku; Sato, Seiichi

2014-05-01

A conventional laser microscope can be used to derive the index of refractivity by the ratio of geometrical height of the transparent platelet to the apparent height of the normal incident light for very small crystals in the wide size range. We demonstrate that the simple method is effective for the samples from 100 μm to 16 μm in size using alkali halide crystals as a model system. The method is also applied for the surface fractured micro-crystals and an inclined crystal with microscopic size regime. Furthermore, we present two-dimensional refractive index mapping as well as two-dimensional height profile for the mixture of three alkali halides, KCl, KI, and NaCl, all are μm in size.

Process equipped with a sloped UV lamp for the fabrication of gradient-refractive-index lenses.

PubMed

Liu, Jui-Hsiang; Chiu, Yi-Hong

2009-05-01

In this investigation, a method for the preparation of gradient-refractive-index (GRIN) lenses by UV-energy-controlled polymerization has been developed. A glass reaction tube equipped with a sloped UV lamp was designed. Methyl methacrylate and diphenyl sulfide were used as the reactive monomer and nonreactive dopant, respectively. Ciba IRGACURE 184 (1-hydroxy-cyclohexyl-phenyl-ketone) was used as the initiator. The effects of initiator concentration, the addition of acrylic polymers, and the preparation conditions on the optical characteristics of the GRIN lenses produced by this method were also investigated. Refractive index distributions and image transmission properties were estimated for all GRIN lenses prepared.

Surface colour photometry of galaxies with Schmidt telescopes.

NASA Technical Reports Server (NTRS)

Wray, J. D.

1972-01-01

A method is described which owes its practicality to the capability of Schmidt telescopes to record a number of galaxy images on a single plate and to the existence of high speed computer controlled area-scanning precision microdensitometers such as the Photometric Data Systems model 1010. The method of analysis results in quantitative color-index information which is displayed in a manner that allows any user to effectively study the morphological properties of the distribution of color-index in galaxies.

Pricing and simulation for real estate index options: Radial basis point interpolation

NASA Astrophysics Data System (ADS)

Gong, Pu; Zou, Dong; Wang, Jiayue

2018-06-01

This study employs the meshfree radial basis point interpolation (RBPI) for pricing real estate derivatives contingent on real estate index. This method combines radial and polynomial basis functions, which can guarantee the interpolation scheme with Kronecker property and effectively improve accuracy. An exponential change of variables, a mesh refinement algorithm and the Richardson extrapolation are employed in this study to implement the RBPI. Numerical results are presented to examine the computational efficiency and accuracy of our method.

Effectiveness of Vegetation Index Transformation for Land Use Identifying and Mapping in the Area of Oil palm Plantation based on SPOT-6 Imagery (Case Study: PT.Tunggal Perkasa Plantations, Air Molek, Indragiri Hulu)

NASA Astrophysics Data System (ADS)

Setyowati, H. A.; S, S. H. Murti B.; Sukentyas, E. S.

2016-11-01

The reflection of land surface, atmosphere and vegetation conditions affect the reflectance value of the object is recorded on remote sensing image so that it can affect the outcome of information extraction from remote sensing imagery one multispectral classification. This study aims to assess the ability of the transformation of generic vegetation index (Wide Dynamic Range Vegetation Index), the vegetation index transformation that is capable reducing the influence of the atmosphere (Atmospherically Resistant Vegetation Index), and the transformation of vegetation index that is capable of reducing the influence of the background soil (Second Modified Soil Adjusted Vegetation Index) for the identification and mapping of land use in the oil palm plantation area based on SPOT-6 archived on June 13, 2013 from LAPAN. The study area selected oil palm plantations PT. Tunggal Perkasa Plantations, Air Molek, Indragiri Hulu, Riau Province. The method is using the transformation of the vegetation index ARVI, MSAVI2, and WDRVI. Sample selection method used was stratified random sampling. The test method used mapping accuracy of the confusion matrix. The results showed that the best transformation of the vegetation index for the identification and mapping of land use in the plantation area is ARVI transformation with a total of accuracy is 96%. Accuracy of mapping land use settlements 100%, replanting 82.35%, 81.25% young oil palm, old oil palm 99.46%, 100% bush, body of water 100%, and 100% bare-soil.

Ray tracing simulation of aero-optical effect using multiple gradient index layer

NASA Astrophysics Data System (ADS)

Yang, Seul Ki; Seong, Sehyun; Ryu, Dongok; Kim, Sug-Whan; Kwon, Hyeuknam; Jin, Sang-Hun; Jeong, Ho; Kong, Hyun Bae; Lim, Jae Wan; Choi, Jong Hwa

2016-10-01

We present a new ray tracing simulation of aero-optical effect through anisotropic inhomogeneous media as supersonic flow field surrounds a projectile. The new method uses multiple gradient-index (GRIN) layers for construction of the anisotropic inhomogeneous media and ray tracing simulation. The cone-shaped projectile studied has 19° semi-vertical angle; a sapphire window is parallel to the cone angle; and an optical system of the projectile was assumed via paraxial optics and infrared image detector. The condition for the steady-state solver conducted through computational fluid dynamics (CFD) included Mach numbers 4 and 6 in speed, 25 km altitude, and 0° angle of attack (AoA). The grid refractive index of the flow field via CFD analysis and Gladstone-Dale relation was discretized into equally spaced layers which are parallel with the projectile's window. Each layer was modeled as a form of 2D polynomial by fitting the refractive index distribution. The light source of ray set generated 3,228 rays for varying line of sight (LOS) from 10° to 40°. Ray tracing simulation adopted the Snell's law in 3D to compute the paths of skew rays in the GRIN layers. The results show that optical path difference (OPD) and boresight error (BSE) decreases exponentially as LOS increases. The variation of refractive index decreases, as the speed of flow field increases the OPD and its rate of decay at Mach number 6 in speed has somewhat larger value than at Mach number 4 in speed. Compared with the ray equation method, at Mach number 4 and 10° LOS, the new method shows good agreement, generated 0.33% of relative root-mean-square (RMS) OPD difference and 0.22% of relative BSE difference. Moreover, the simulation time of the new method was more than 20,000 times faster than the conventional ray equation method. The technical detail of the new method and simulation is presented with results and implication.

Gradient polymer network liquid crystal with a large refractive index change.

PubMed

Ren, Hongwen; Xu, Su; Wu, Shin-Tson

2012-11-19

A simple approach for preparing gradient polymer network liquid crystal (PNLC) with a large refractive index change is demonstrated. To control the effective refractive index at a given cell position, we applied a voltage to a homogeneous cell containing LC/diacrylate monomer mixture to generate the desired tilt angle and then stabilize the LC orientation with UV-induced polymer network. By varying the applied voltage along with the cells' movement, a PNLC with a gradient refractive index distribution is obtained. In comparison with conventional approaches using patterned photomask or electrode, our method offers following advantages: large refractive index change, freedom to design specific index profile, and large panel capability. Potential applications include tunable-focus lenses, prism gratings, phase modulators, and other adaptive photonic devices.

Space debris detection in optical image sequences.

PubMed

Xi, Jiangbo; Wen, Desheng; Ersoy, Okan K; Yi, Hongwei; Yao, Dalei; Song, Zongxi; Xi, Shaobo

2016-10-01

We present a high-accuracy, low false-alarm rate, and low computational-cost methodology for removing stars and noise and detecting space debris with low signal-to-noise ratio (SNR) in optical image sequences. First, time-index filtering and bright star intensity enhancement are implemented to remove stars and noise effectively. Then, a multistage quasi-hypothesis-testing method is proposed to detect the pieces of space debris with continuous and discontinuous trajectories. For this purpose, a time-index image is defined and generated. Experimental results show that the proposed method can detect space debris effectively without any false alarms. When the SNR is higher than or equal to 1.5, the detection probability can reach 100%, and when the SNR is as low as 1.3, 1.2, and 1, it can still achieve 99%, 97%, and 85% detection probabilities, respectively. Additionally, two large sets of image sequences are tested to show that the proposed method performs stably and effectively.

Detection Progress of Selected Drugs in TLC

PubMed Central

Pyka, Alina

2014-01-01

This entry describes applications of known indicators and dyes as new visualizing reagents and various visualizing systems as well as photocatalytic reactions and bioautography method for the detection of bioactive compounds including drugs and compounds isolated from herbal extracts. Broadening index, detection index, characteristics of densitometric band, modified contrast index, limit of detection, densitometric visualizing index, and linearity range of detected compounds were used for the evaluation of visualizing effects of applied visualizing reagents. It was shown that visualizing effect depends on the chemical structure of the visualizing reagent, the structure of the substance detected, and the chromatographic adsorbent applied. The usefulness of densitometry to direct detection of some drugs was also shown. Quoted papers indicate the detection progress of selected drugs investigated by thin-layer chromatography (TLC). PMID:24551853

Laser interferometry of the hydrolytic changes in protein solutions: the refractive index and hydration shells.

PubMed

Sarimov, R M; Matveyeva, T A; Binhi, V N

2018-05-11

Using an original laser interferometer of enhanced sensitivity, an increase in the refractive index of a protein solution was observed during the reaction of proteolysis catalyzed by pepsin. The increase in the refractive index of the protein solution at a concentration of 4 mg/ml was [Formula: see text] for bovine serum albumin and [Formula: see text] for lysozyme. The observed effect disproves the existing idea that the refractive index of protein solutions is determined only by their amino acid composition and concentration. It is shown that the refractive index also depends on the state of protein fragmentation. A mathematical model of proteolysis and a real-time method for estimating the state of protein hydration based on the measurement of refractive index during the reaction are proposed. A good agreement between the experimental and calculated time dependences of the refractive index shows that the growth of the surface of protein fragments and the change in the number of hydration cavities during proteolysis can be responsible for the observed effect.

Social accounting matrix and the effects of economic reform on health price index and household expenditures: Evidence from Iran.

PubMed

Keshavarz, Khosro; Najafi, Behzad; Andayesh, Yaghob; Rezapour, Aziz; Abolhallaj, Masoud; Sarabi Asiabar, Ali; Hashemi Meshkini, Amir; Sanati, Ehsan; Mirian, Iman; Nikfar, Shekoofeh; Lotfi, Farhad

2017-01-01

Background: Socioeconomic indicators are the main factors that affect health outcome. Health price index (HPI) and households living costs (HLC) are affected by economic reform. This study aimed at examining the effect of subsidy targeting plan (STP) on HPI and HLC. Methods: The social accounting matrix was used to study the direct and indirect effects of STP. We chose 11 health related goods and services including insurance, compulsory social security services, hospital services, medical and dental services, other human health services, veterinary services, social services, environmental health services, laundry& cleaning and dyeing services, cosmetic and physical health services, and pharmaceutical products in the social accounting matrix to examine the health price index. Data were analyzed by the I-O&SAM software. Results: Due to the subsidy release on energy, water, and bread prices, we found that (i) health related goods and services groups' price index rose between 33.43% and 77.3%, (ii) the living cost index of urban households increased between 48.75% and 58.21%, and (iii) the living cost index of rural households grew between 53.51% and 68.23%. The results demonstrated that the elimination of subsidy would have negative effects on health subdivision and households' costs such that subsidy elimination increased the health prices index and the household living costs, especially among low-income families. The STP had considerable effects on health subdivision price index. Conclusion: The elimination or reduction of energy carriers and basic commodities subsidies have changed health price and households living cost index. Therefore, the policymakers should consider controlling the price of health sectors, price fluctuations and shocks.

A comparison of the effects of the most commonly used tocolytic agents on maternal and fetal blood flow

PubMed Central

Güden, Mahmut; Akkurt, Mehmet Özgür; Eriş Yalçın, Serenat; Coşkun, Bora; Akkurt, Iltaç; Yavuz, And; Yirci, Bülent; Kandemir, Necmi Ömer

2016-01-01

Objective: To investigate the effects of two tocolytics, nifedipine and magnesium sulfate, on Doppler indices in maternal and fetal vessels. Materials and Methods: We recruited 100 pregnant women with preterm birth between 24-36 gestational weeks who were admitted to our tertiary center over a two-year period. Patients were allocated to nifedipine (n=49) and magnesium sulfate (n=51) groups and Doppler indices of umbilical, middle cerebral, uterine arteries, and ductus venosus were measured before and after tocolysis. Results: There were no differences between the groups in terms of maternal age, gestational week, body mass indexes, cervical dilation, effacement at admission, birth weights and latency periods until birth. Nifedipine decreased resistance indexes in uterine arteries but magnesium sulfate increased resistance especially in the right uterine artery. Nifedipine significantly decreased systole to diastole and resistance index in the umbilical artery, magnesium sulfate increased systole to diastole and resistance index but this was not statistically significant. Nifedipine acted variably on resistance index and pulsatility index in the ductus venosus; however, magnesium sulfate increased resistance. Nifedipine decreased pulsatility index in the middle cerebral artery, contrary to magnesium sulfate with which it increased. Conclusion: Nifedipine had favorable effects on maternal and fetal vessel indexes but magnesium sulfate increased resistance. Despite the proposed neuroprotective benefits of magnesium sulfate, nifedipine seems to be a better and safer tocolytic agent than magnesium sulfate due to its positive beneficial effects on maternal and fetal vessels. PMID:28913098

Effectiveness Evaluation Method of Anti-Radiation Missile against Active Decoy

NASA Astrophysics Data System (ADS)

Tang, Junyao; Cao, Fei; Li, Sijia

2017-06-01

In the problem of anti-radiation missile against active decoy, whether the ARM can effectively kill the target radiation source and bait is an important index for evaluating the operational effectiveness of the missile. Aiming at this problem, this paper proposes a method to evaluate the effect of ARM against active decoy. Based on the calculation of ARM’s ability to resist the decoy, the paper proposes a method to evaluate the decoy resistance based on the key components of the hitting radar. The method has the advantages of scientific and reliability.

The effects of early hypo- and hyperthyroidism on the development of rat cerebellar cortex. III. Kinetics of cell proliferation in the external granular layer.

PubMed

Lauder, J M

1977-04-22

The effects of early hypo- and hyperthyroidism on the rates of cell acquisition and proliferation have been studied in the external granular layer (EGL) of the developing rat cerebellar cortex at 10 days of age using quantitative autoradiographic methods. Both altered thyroid states reduce the rate of cell acquisition in the EGL, but appear to do so for different reasons. Hyperthyroidism shortens the average length of the cell cycle by decreasing the duration of the pre-DNA synthetic phase (G1), indicating that excess thyroxine may exert a direct effect on the EGL. This action involves the early onset of neuronal differentiation (cessation of proliferation)46 which presumably leads to the observed decrease in the rate of cell acquisition (increased doubling time). Such differentiating cells do not, however, leave the proliferative zone or the EGL prematurely, resulting in a reduced labeling index, mitotic index, and growth fraction as non-dividing cells dilute the proliferating cell population. Hypothyroidism, on the other hand, leads to no significant change in the length of the cell cycle or in the mitotic index, but causes a decreased labeling index and growth fraction, as well as a reduced rate of cell acquisition (increased doubling time). No significant change in the amount of cell death in the EGL could be found to explain this apparent discrepancy between the rate of cell proliferation (cell cycle length) and cell acqusiition. The answer to this puzzle appears to lie in the mitotic index, which is not affected to the same extent as the labeling index, although it is also slightly reduced. If cells were to remain longer in mitosis, this could result in a decreased labeling index and growth fraction but nearly normal mitotic index and cell cycle length (as measured using the % labeled mitoses method), since those cells dropping out of the cycling population would be counted as mitoses...

Effect of water content and organic carbon on remote sensing of crop residue cover

NASA Astrophysics Data System (ADS)

Serbin, G.; Hunt, E. R., Jr.; Daughtry, C. S. T.; McCarty, G. W.; Brown, D. J.; Doraiswamy, P. C.

2009-04-01

Crop residue cover is an important indicator of tillage method. Remote sensing of crop residue cover is an attractive and efficient method when compared with traditional ground-based methods, e.g., the line-point transect or windshield survey. A number of spectral indices have been devised for residue cover estimation. Of these, the most effective are those in the shortwave infrared portion of the spectrum, situated between 1950 and 2500 nm. These indices include the hyperspectral Cellulose Absorption Index (CAI), and advanced multispectral indices, i.e., the Lignin-Cellulose Absorption (LCA) index and the Shortwave Infrared Normalized Difference Residue Index (SINDRI), which were devised for the NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor. Spectra of numerous soils from U.S. Corn Belt (Indiana and Iowa) were acquired under wetness conditions varying from saturation to oven-dry conditions. The behavior of soil reflectance with water content was also dependent on the soil organic carbon content (SOC) of the soils, and the location of the spectral bands relative to significant water absorptions. High-SOC soils showed the least change in spectral index values with increase in soil water content. Low-SOC soils, on the other hand, showed measurable difference. For CAI, low-SOC soils show an initial decrease in index value followed by an increase, due to the way that water content affects CAI spectral bands. Crop residue CAI values decrease with water content. For LCA, water content increases decrease crop residue index values and increase them for soils, resulting in decreased contrast. SINDRI is also affected by SOC and water content. As such, spatial information on the distribution of surface soil water content and SOC, when used in a geographic information system (GIS), will improve the accuracy of remotely-sensed crop residue cover estimates.

Control range: a controllability-based index for node significance in directed networks

NASA Astrophysics Data System (ADS)

Wang, Bingbo; Gao, Lin; Gao, Yong

2012-04-01

While a large number of methods for module detection have been developed for undirected networks, it is difficult to adapt them to handle directed networks due to the lack of consensus criteria for measuring the node significance in a directed network. In this paper, we propose a novel structural index, the control range, motivated by recent studies on the structural controllability of large-scale directed networks. The control range of a node quantifies the size of the subnetwork that the node can effectively control. A related index, called the control range similarity, is also introduced to measure the structural similarity between two nodes. When applying the index of control range to several real-world and synthetic directed networks, it is observed that the control range of the nodes is mainly influenced by the network's degree distribution and that nodes with a low degree may have a high control range. We use the index of control range similarity to detect and analyze functional modules in glossary networks and the enzyme-centric network of homo sapiens. Our results, as compared with other approaches to module detection such as modularity optimization algorithm, dynamic algorithm and clique percolation method, indicate that the proposed indices are effective and practical in depicting structural and modular characteristics of sparse directed networks.

Selection and Evaluation of Indexes Commonly Used to Determine Contamination with T-2 Toxin in Pacific White Shrimp Litopenaeus vannamei by the Grey Relational Method.

PubMed

Lu, Pengli; Wang, Yaling; Dai, Zhe; Sun, Lijun; Xu, Defeng; Liu, Ying; Ye, Riying; Gooneratne, Ravi; Bi, Siyuan

2017-09-01

The objectives of the present study were to evaluate the effects of different concentrations of the mycotoxin T-2 toxin in feed on muscle performance in the Pacific white shrimp Litopenaeus vannamei, evaluate indexes of physiological variables that indicate T-2 toxin contamination in the shrimp using the grey relational method, and determine the dose-response relationships between T-2 toxin and the indexes. Of the 6 physical, 7 biochemical, and 17 nutritional indexes examined, the values of the grey relational coefficients were highest for the hepatopancreas: body weight ratio (HBR), alanine aminotransferase (ALT) activity, and serine (SER) content (0.83, 0.68, and 0.82, respectively). Therefore, the HBR, ALT activity, and SER content were selected as appropriate indexes for contamination of Pacific white shrimp muscle with T-2 toxin. Based on their dose-response relationship curves, mean effective doses of 1.45, 1.69, and 1.33 mg of T-2 toxin/kg of feed were obtained for the HBR, ALT activity, and SER content, respectively. These results offer technical reference points for the evaluation and control of T-2 toxin in shrimp feed. Received April 28, 2016; accepted April 9, 2017.

Design of a Wireless Sensor System with the Algorithms of Heart Rate and Agility Index for Athlete Evaluation

PubMed Central

Li, Meina; Kim, Youn Tae

2017-01-01

Athlete evaluation systems can effectively monitor daily training and boost performance to reduce injuries. Conventional heart-rate measurement systems can be easily affected by artifact movement, especially in the case of athletes. Significant noise can be generated owing to high-intensity activities. To improve the comfort for athletes and the accuracy of monitoring, we have proposed to combine robust heart rate and agility index monitoring algorithms into a small, light, and single node. A band-pass-filter-based R-wave detection algorithm was developed. The agility index was calculated by preprocessing with band-pass filtering and employing the zero-crossing detection method. The evaluation was conducted under both laboratory and field environments to verify the accuracy and reliability of the algorithm. The heart rate and agility index measurements can be wirelessly transmitted to a personal computer in real time by the ZigBee telecommunication system. The results show that the error rate of measurement of the heart rate is within 2%, which is comparable with that of the traditional wired measurement method. The sensitivity of the agility index, which could be distinguished as the activity speed, changed slightly. Thus, we confirmed that the developed algorithm could be used in an effective and safe exercise-evaluation system for athletes. PMID:29039763

Towards the Application of Fuzzy Logic for Developing a Novel Indoor Air Quality Index (FIAQI)

PubMed Central

JAVID, Allahbakhsh; HAMEDIAN, Amir Abbas; GHARIBI, Hamed; SOWLAT, Mohammad Hossein

2016-01-01

Background: In the past few decades, Indoor Air Pollution (IAP) has become a primary concern to the point. It is increasingly believed to be of equal or greater importance to human health compared to ambient air. However, due to the lack of comprehensive indices for the integrated assessment of indoor air quality (IAQ), we aimed to develop a novel, Fuzzy-Based Indoor Air Quality Index (FIAQI) to bridge the existing gap in this area. Methods: We based our index on fuzzy logic, which enables us to overcome the limitations of traditional methods applied to develop environmental quality indices. Fifteen parameters, including the criteria air pollutants, volatile organic compounds, and bioaerosols were included in the FIAQI due mainly to their significant health effects. Weighting factors were assigned to the parameters based on the medical evidence available in the literature on their health effects. The final FIAQI consisted of 108 rules. In order to demonstrate the performance of the index, data were intentionally generated to cover a variety of quality levels. In addition, a sensitivity analysis was conducted to assess the validity of the index. Results: The FIAQI tends to be a comprehensive tool to classify IAQ and produce accurate results. Conclusion: It seems useful and reliable to be considered by authorities to assess IAQ environments. PMID:27114985

Effects of refractive index mismatch in optical CT imaging of polymer gel dosimeters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manjappa, Rakesh; Makki S, Sharath; Kanhirodan, Rajan, E-mail: rajan@physics.iisc.ernet.in

2015-02-15

Purpose: Proposing an image reconstruction technique, algebraic reconstruction technique-refraction correction (ART-rc). The proposed method takes care of refractive index mismatches present in gel dosimeter scanner at the boundary, and also corrects for the interior ray refraction. Polymer gel dosimeters with high dose regions have higher refractive index and optical density compared to the background medium, these changes in refractive index at high dose results in interior ray bending. Methods: The inclusion of the effects of refraction is an important step in reconstruction of optical density in gel dosimeters. The proposed ray tracing algorithm models the interior multiple refraction at themore » inhomogeneities. Jacob’s ray tracing algorithm has been modified to calculate the pathlengths of the ray that traverses through the higher dose regions. The algorithm computes the length of the ray in each pixel along its path and is used as the weight matrix. Algebraic reconstruction technique and pixel based reconstruction algorithms are used for solving the reconstruction problem. The proposed method is tested with numerical phantoms for various noise levels. The experimental dosimetric results are also presented. Results: The results show that the proposed scheme ART-rc is able to reconstruct optical density inside the dosimeter better than the results obtained using filtered backprojection and conventional algebraic reconstruction approaches. The quantitative improvement using ART-rc is evaluated using gamma-index. The refraction errors due to regions of different refractive indices are discussed. The effects of modeling of interior refraction in the dose region are presented. Conclusions: The errors propagated due to multiple refraction effects have been modeled and the improvements in reconstruction using proposed model is presented. The refractive index of the dosimeter has a mismatch with the surrounding medium (for dry air or water scanning). The algorithm reconstructs the dose profiles by estimating refractive indices of multiple inhomogeneities having different refractive indices and optical densities embedded in the dosimeter. This is achieved by tracking the path of the ray that traverses through the dosimeter. Extensive simulation studies have been carried out and results are found to be matching that of experimental results.« less

SU-F-T-352: Development of a Knowledge Based Automatic Lung IMRT Planning Algorithm with Non-Coplanar Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, W; Wu, Q; Yuan, L

Purpose: To improve the robustness of a knowledge based automatic lung IMRT planning method and to further validate the reliability of this algorithm by utilizing for the planning of clinical cases with non-coplanar beams. Methods: A lung IMRT planning method which automatically determines both plan optimization objectives and beam configurations with non-coplanar beams has been reported previously. A beam efficiency index map is constructed to guide beam angle selection in this algorithm. This index takes into account both the dose contributions from individual beams and the combined effect of multiple beams which is represented by a beam separation score. Wemore » studied the effect of this beam separation score on plan quality and determined the optimal weight for this score.14 clinical plans were re-planned with the knowledge-based algorithm. Significant dosimetric metrics for the PTV and OARs in the automatic plans are compared with those in the clinical plans by the two-sample t-test. In addition, a composite dosimetric quality index was defined to obtain the relationship between the plan quality and the beam separation score. Results: On average, we observed more than 15% reduction on conformity index and homogeneity index for PTV and V{sub 40}, V{sub 60} for heart while an 8% and 3% increase on V{sub 5}, V{sub 20} for lungs, respectively. The variation curve of the composite index as a function of angle spread score shows that 0.6 is the best value for the weight of the beam separation score. Conclusion: Optimal value for beam angle spread score in automatic lung IMRT planning is obtained. With this value, model can result in statistically the “best” achievable plans. This method can potentially improve the quality and planning efficiency for IMRT plans with no-coplanar angles.« less

Assessment of sustainable urban transport development based on entropy and unascertained measure.

PubMed

Li, Yancang; Yang, Jing; Shi, Huawang; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development.

The comparative effects of 0.12% chlorhexidine and herbal oral rinse on dental plaque-induced gingivitis: A randomized clinical trial

PubMed Central

Bhate, Devaki; Jain, Sanjay; Kale, Rahul; Muglikar, Sangeeta

2015-01-01

Background: Chlorhexidine (CHX) is considered as a gold standard of antimicrobial rinses. Various herbal oral rinses are available in the market. However, little is known of its effectiveness. Aim: The aim of this study was to evaluate the clinical changes after the usage of herbal oral rinse and 0.12% CHX. Materials and Methods: In a randomized clinical trial, 76 patients with dental plaque-induced gingivitis were assigned to Group I (Herbal Oral Rinse - Hiora®) and 76 patients with dental plaque-induced gingivitis to Group II (0.12% Chlorhexidine-Peridex®). Gingival index and Plaque index scores were recorded at baseline and 21 days after scaling. Results: Intragroup comparison in both groups showed that plaque index and gingival index scores were statistically significant after 21 days as compared to baseline. Intergroup comparison showed that plaque index scores and gingival index scores were statistically significant in Group II as compared to Group I. Conclusion: When herbal oral rinse was compared to 0.12% CHX, 0.12% CHX mouth rinse effectively reduced the clinical symptoms of plaque-induced gingivitis. PMID:26392686

The Traffic Noise Index: A Method of Controlling Noise Nuisance.

ERIC Educational Resources Information Center

Langdon, F. J.; Scholes, W. E.

This building research survey is an analysis of the social nuisance caused by urban motor ways and their noise. The Traffic Noise Index is used to indicate traffic noises and their effects on architectural designs and planning, while suggesting the need for more and better window insulation and acoustical barriers. Overall concern is for--(1)…

Short term clinical effectiveness of a 0.07% cetylpyridinium chloride mouth rinse in patients undergoing fixed orthodontic appliance treatment

PubMed Central

Pahwa, Narinder; Kumar, Atul; Gupta, Siddharth

2011-01-01

Objectives To test the short term clinical effectiveness of commercially available 0.07%.cetylpyridinium chloride mouth rinse in patients undergoing fixed orthodontic treatment as compared to a placebo mouth rinse and patients using toothbrush and toothpaste. Method Forty-five subjects for this double blind study were assigned randomly into three groups of 15 each. Gingival inflammation, plaque accumulation, and bleeding on probing, were recorded at baseline (10 days after prophylaxis), and at the end of one month in all the three groups and compared. Results Paired t test showed significant differences in bleeding index for pre and post treatment recordings for cetylpyridinium group. Modified gingival index showed no significant difference in the cetylpyridinium group. For plaque index significant difference was found for cetylpyridinium and control groups. Conclusion Cetylpyridinium mouth rinse 0.7% was found to be effective in reducing the bleeding and plaque index scores. It was not effective in reducing the modified gingival index scores. Cetylpyridinium mouth rinse 0.07% improves the oral hygiene of orthodontic patients when used as an adjunct to normal oral hygiene measures. PMID:23960507

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loeffler, M. J.; Moore, M. H.; Gerakines, P. A.

We present the first study on the effects of the deposition technique on the measurements of the visible refractive index and the density of a low-temperature ice using solid carbon dioxide (CO{sub 2}) at 14–70 K as an example. While our measurements generally agree with previous studies that show a dependence of index and density on temperature below 50 K, we also find that the measured values depend on the method used to create each sample. Below 50 K, we find that the refractive index varied by as much as 4% and the density by as much as 16% atmore » a single temperature depending on the deposition method. We also show that the Lorentz–Lorenz approximation is valid for solid CO{sub 2} across the full 14–70 K temperature range, regardless of the deposition method used. Since the refractive index and density are important in calculations of optical constants and infrared (IR) band strengths of materials, our results suggest that the deposition method must be considered in cases where n {sub vis} and ρ are not measured in the same experimental setup where the IR spectral measurements are made.« less

Intensive care unit depth of sleep: proof of concept of a simple electroencephalography index in the non-sedated

PubMed Central

2014-01-01

Introduction Intensive care unit (ICU) patients are known to experience severely disturbed sleep, with possible detrimental effects on short- and long- term outcomes. Investigation into the exact causes and effects of disturbed sleep has been hampered by cumbersome and time consuming methods of measuring and staging sleep. We introduce a novel method for ICU depth of sleep analysis, the ICU depth of sleep index (IDOS index), using single channel electroencephalography (EEG) and apply it to outpatient recordings. A proof of concept is shown in non-sedated ICU patients. Methods Polysomnographic (PSG) recordings of five ICU patients and 15 healthy outpatients were analyzed using the IDOS index, based on the ratio between gamma and delta band power. Manual selection of thresholds was used to classify data as either wake, sleep or slow wave sleep (SWS). This classification was compared to visual sleep scoring by Rechtschaffen & Kales criteria in normal outpatient recordings and ICU recordings to illustrate face validity of the IDOS index. Results When reduced to two or three classes, the scoring of sleep by IDOS index and manual scoring show high agreement for normal sleep recordings. The obtained overall agreements, as quantified by the kappa coefficient, were 0.84 for sleep/wake classification and 0.82 for classification into three classes (wake, non-SWS and SWS). Sensitivity and specificity were highest for the wake state (93% and 93%, respectively) and lowest for SWS (82% and 76%, respectively). For ICU recordings, agreement was similar to agreement between visual scorers previously reported in literature. Conclusions Besides the most satisfying visual resemblance with manually scored normal PSG recordings, the established face-validity of the IDOS index as an estimator of depth of sleep was excellent. This technique enables real-time, automated, single channel visualization of depth of sleep, facilitating the monitoring of sleep in the ICU. PMID:24716479

Logarithm conformal mapping brings the cloaking effect

PubMed Central

Xu, Lin; Chen, Huanyang

2014-01-01

Over the past years, invisibility cloaks have been extensively discussed since transformation optics emerges. Generally, the electromagnetic parameters of invisibility cloaks are complicated tensors, yet difficult to realize. As a special method of transformation optics, conformal mapping helps us design invisibility cloak with isotropic materials of a refractive index distribution. However, for all proposed isotropic cloaks, the refractive index range is at such a breadth that challenges current experimental fabrication. In this work, we propose two new kinds of logarithm conformal mappings for invisible device designs. For one of the mappings, the refractive index distribution of conformal cloak varies from 0 to 9.839, which is more feasible for future implementation. Numerical simulations by using finite element method are performed to confirm the theoretical analysis. PMID:25359138

Mixed effects modelling for glass category estimation from glass refractive indices.

PubMed

Lucy, David; Zadora, Grzegorz

2011-10-10

520 Glass fragments were taken from 105 glass items. Each item was either a container, a window, or glass from an automobile. Each of these three classes of use are defined as glass categories. Refractive indexes were measured both before, and after a programme of re-annealing. Because the refractive index of each fragment could not in itself be observed before and after re-annealing, a model based approach was used to estimate the change in refractive index for each glass category. It was found that less complex estimation methods would be equivalent to the full model, and were subsequently used. The change in refractive index was then used to calculate a measure of the evidential value for each item belonging to each glass category. The distributions of refractive index change were considered for each glass category, and it was found that, possibly due to small samples, members of the normal family would not adequately model the refractive index changes within two of the use types considered here. Two alternative approaches to modelling the change in refractive index were used, one employed more established kernel density estimates, the other a newer approach called log-concave estimation. Either method when applied to the change in refractive index was found to give good estimates of glass category, however, on all performance metrics kernel density estimates were found to be slightly better than log-concave estimates, although the estimates from log-concave estimation prossessed properties which had some qualitative appeal not encapsulated in the selected measures of performance. These results and implications of these two methods of estimating probability densities for glass refractive indexes are discussed. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Validity of a traffic air pollutant dispersion model to assess exposure to fine particles.

PubMed

Kostrzewa, Aude; Reungoat, Patrice; Raherison, Chantal

2009-08-01

Fine particles (PM(2.5)) are an important component of air pollution. Epidemiological studies have shown health effects due to ambient air particles, particularly allergies in children. Since the main difficulty is to determine exposure to such pollution, traffic air pollutant (TAP) dispersions models have been developed to improve the estimation of individual exposure levels. One such model, the ExTra index, has been validated for nitrogen oxide concentrations but not for other pollutants. The purpose of this study was to assess the validity of the ExTra index to assess PM(2.5) exposure. We compared PM(2.5) concentrations calculated by the ExTra index to reference measures (passive samplers situated under the covered part of the playground), in 15 schools in Bordeaux, in 2000. First, we collected the input data required by the ExTra index: background and local pollution depending on traffic, meteorology and topography. Second, the ExTra index was calculated for each school. Statistical analysis consisted of a graphic description; then, we calculated an intraclass correlation coefficient. Concentrations calculated with the ExTra index and the reference method were similar. The ExTra index underestimated exposure by 2.2 microg m(-3) on average compared to the reference method. The intraclass correlation coefficient was 0.85 and its 95% confidence interval was [0.62; 0.95]. The results suggest that the ExTra index provides an assessment of PM(2.5) exposure similar to that of the reference method. Although caution is required in interpreting these results owing to the small number of sites, the ExTra index could be a useful epidemiological tool for reconstructing individual exposure, an important challenge in epidemiology.

Influence of Long-term Application of Feedlot Manure Amendments on Water Repellency of a Clay Loam Soil.

PubMed

Miller, Jim J; Beasley, Bruce W; Hazendonk, Paul; Drury, Craig F; Chanasyk, David S

2017-05-01

Long-term application of feedlot manure to cropland may increase the quantity of soil organic carbon (C) and change its quality, which may influence soil water repellency. The objective was to determine the influence of feedlot manure type (stockpiled vs. composted), bedding material (straw [ST] vs. woodchips [WD]), and application rate (13, 39, or 77 Mg ha) on repellency of a clay loam soil after 17 annual applications. The repellency was determined on all 14 treatments using the water repellency index ( index), the water drop penetration time (WDPT) method, and molarity of ethanol (MED) test. The C composition of particulate organic matter in soil of five selected treatments after 16 annual applications was also determined using C nuclear magnetic resonance-direct polarization with magic-angle spinning (NMR-DPMAS). Manure type had no significant ( > 0.05) effect on index and WDPT, and MED classification was similar. Mean index and WDPT values were significantly greater and MED classification more hydrophobic for WD than ST. Application rate had no effect on the index, but WDPT was significantly greater and MED classification more hydrophobic with increasing application rate. Strong ( > 0.7) but nonsignificant positive correlations were found between index and WDPT versus hydrophobic (alkyl + aromatic) C, lignin at 74 ppm (O-alkyl), and unspecified aromatic compounds at 144 ppm. Specific aromatic compounds also contributed more to repellency than alkyl, O-alkyl, and carbonyl compounds. Overall, all three methods consistently showed that repellency was greater for WD- than ST-amended clay loam soil, but manure type had no effect. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Effectiveness of Biodiversity Surrogates for Conservation Planning: Different Measures of Effectiveness Generate a Kaleidoscope of Variation

PubMed Central

Grantham, Hedley S.; Pressey, Robert L.; Wells, Jessie A.; Beattie, Andrew J.

2010-01-01

Conservation planners represent many aspects of biodiversity by using surrogates with spatial distributions readily observed or quantified, but tests of their effectiveness have produced varied and conflicting results. We identified four factors likely to have a strong influence on the apparent effectiveness of surrogates: (1) the choice of surrogate; (2) differences among study regions, which might be large and unquantified (3) the test method, that is, how effectiveness is quantified, and (4) the test features that the surrogates are intended to represent. Analysis of an unusually rich dataset enabled us, for the first time, to disentangle these factors and to compare their individual and interacting influences. Using two data-rich regions, we estimated effectiveness using five alternative methods: two forms of incidental representation, two forms of species accumulation index and irreplaceability correlation, to assess the performance of ‘forest ecosystems’ and ‘environmental units’ as surrogates for six groups of threatened species—the test features—mammals, birds, reptiles, frogs, plants and all of these combined. Four methods tested the effectiveness of the surrogates by selecting areas for conservation of the surrogates then estimating how effective those areas were at representing test features. One method measured the spatial match between conservation priorities for surrogates and test features. For methods that selected conservation areas, we measured effectiveness using two analytical approaches: (1) when representation targets for the surrogates were achieved (incidental representation), or (2) progressively as areas were selected (species accumulation index). We estimated the spatial correlation of conservation priorities using an index known as summed irreplaceability. In general, the effectiveness of surrogates for our taxa (mostly threatened species) was low, although environmental units tended to be more effective than forest ecosystems. The surrogates were most effective for plants and mammals and least effective for frogs and reptiles. The five testing methods differed in their rankings of effectiveness of the two surrogates in relation to different groups of test features. There were differences between study areas in terms of the effectiveness of surrogates for different test feature groups. Overall, the effectiveness of the surrogates was sensitive to all four factors. This indicates the need for caution in generalizing surrogacy tests. PMID:20644726

Determination of the effective refractive index spectrum of a quantum-well semiconductor laser diode from the measured modal gain spectrum

NASA Astrophysics Data System (ADS)

Wu, Linzhang; Tian, Wei; Gao, Feng

2004-09-01

This paper presents a self-consistent method to directly determine the effective refractive-index spectrum of a semiconductor quantum-well (QW) laser diode from the measured modal gain spectrum for a given current. The dispersion spectra of the optical waveguide confinement factor and the strongly carrier-density-dependent refractive index of the QW active layer of the test laser are also accurately obtained. The experimental result from a single QW GaInP/AlGaInP laser diode, which has 6 nm thick compressively strained Ga0.4InP active layer sandwiched by two 80 nm thick Al0.33GaInP, is presented.

Determination of the spectral values of the real part of the relative refractive index of human blood erythrocytes from the measured directional scattering coefficients

NASA Astrophysics Data System (ADS)

Kugeiko, M. M.; Lisenko, S. A.

2008-07-01

An easily automated method for determining the real part of the refractive index of human blood erythrocytes in the range 0.3 1.2 μm is proposed. The method is operationally and metrologically reliable and is based on the measurement of the coefficients of light scattering from forward and backward hemisphere by two pairs of angles and on the use of multiple regression equations. An engineering solution for constructing a measurement system according to this method is proposed, which makes it possible to maximally reduce the calibration errors and effects of destabilizing factors.

Determination of absorption coefficient of nanofluids with unknown refractive index from reflection and transmission spectra

NASA Astrophysics Data System (ADS)

Kim, Joong Bae; Lee, Seungyoon; Lee, Kyungeun; Lee, Ikjin; Lee, Bong Jae

2018-07-01

It has been shown that the absorption coefficient of a nanofluid can be actively tuned by changing material, size, shape, and concentration of the nanoparticle suspension. In applications of engineered nanofluids for the direct absorption of solar radiation, it is important to experimentally characterize the absorption coefficient of nanofluids in the solar spectrum. If the refractive index of the base fluid (i.e., the solution without nanoparticles) is known a priori, the absorption coefficient of nanofluids can be easily determined from the transmission spectrum. However, if the refractive index of the base fluid is not known, it is not straightforward to extract the absorption coefficient solely from the transmission spectrum. The present work aims to develop an analytical method of determining the absorption coefficient of nanofluids with unknown refractive index by measuring both reflection and transmission spectra. The proposed method will be validated with deionized water, and the effect of measurement uncertainty will be carefully examined. Finally, the general applicability of the proposed method will also be demonstrated for Therminol VP-1 as well as the Therminol VP-1 - graphite nanofluid.

Application of the BMWP-Costa Rica biotic index in aquatic biomonitoring: sensitivity to collection method and sampling intensity.

PubMed

Gutiérrez-Fonseca, Pablo E; Lorion, Christopher M

2014-04-01

The use of aquatic macroinvertebrates as bio-indicators in water quality studies has increased considerably over the last decade in Costa Rica, and standard biomonitoring methods have now been formulated at the national level. Nevertheless, questions remain about the effectiveness of different methods of sampling freshwater benthic assemblages, and how sampling intensity may influence biomonitoring results. In this study, we compared the results of qualitative sampling using commonly applied methods with a more intensive quantitative approach at 12 sites in small, lowland streams on the southern Caribbean slope of Costa Rica. Qualitative samples were collected following the official protocol using a strainer during a set time period and macroinvertebrates were field-picked. Quantitative sampling involved collecting ten replicate Surber samples and picking out macroinvertebrates in the laboratory with a stereomicroscope. The strainer sampling method consistently yielded fewer individuals and families than quantitative samples. As a result, site scores calculated using the Biological Monitoring Working Party-Costa Rica (BMWP-CR) biotic index often differed greatly depending on the sampling method. Site water quality classifications using the BMWP-CR index differed between the two sampling methods for 11 of the 12 sites in 2005, and for 9 of the 12 sites in 2006. Sampling intensity clearly had a strong influence on BMWP-CR index scores, as well as perceived differences between reference and impacted sites. Achieving reliable and consistent biomonitoring results for lowland Costa Rican streams may demand intensive sampling and requires careful consideration of sampling methods.

Liquid core photonic crystal fiber with low-refractive-index liquids for optofluidic applications.

PubMed

Park, Jiyoung; Kang, Doo-Eui; Paulson, Bjorn; Nazari, Tavakol; Oh, Kyunghwan

2014-07-14

A defectless hexagonal air-silica photonic crystal fiber (PCF) structure with its central hole selectively filled by a low-refractive-index liquid is numerically analyzed. Despite the fact that the refractive index of the liquid is significantly lower than that of silica, we found an optimal range of waveguide parameters to ensure light guidance through the liquid core in the fundamental mode, maximizing the light-liquid interaction over a desired wavelength range. Using the vectorial finite element method (FEM), we report detailed parametric studies in terms of the effective index, chromatic dispersion, optical loss, and modal intensity distribution of the liquid core PCFs.

Child Disinhibition, Parent Restriction, and Child Body Mass Index in Low-Income Preschool Families

ERIC Educational Resources Information Center

Sparks, Martha A.; Radnitz, Cynthia L.

2013-01-01

Objective: To examine both unique and interactive effects of parent restrictive feeding and child disinhibited eating behavior on child body mass index (BMI) in low-income Latino and African American preschoolers. Methods: The sample included 229 parent-child pairs, the majority of whom were low-income and Latino (57%) or African American (25%).…

The Feasibility of Reducing Sitting Time in Overweight and Obese Older Adults

ERIC Educational Resources Information Center

Rosenberg, Dori E.; Gell, Nancy M.; Jones, Salene M. W.; Renz, Anne; Kerr, Jacqueline; Gardiner, Paul A.; Arterburn, David

2015-01-01

Background: Overweight and obese older adults have high sedentary time. We tested the feasibility and preliminary effects of a sedentary time reduction intervention among adults over age 60 with a body mass index over 27 kg/m2 using a nonrandomized one-arm design. Methods: Participants (N = 25, mean age = 71.4, mean body mass index = 34) completed…

The Effects of Indexical and Phonetic Variation on Vowel Perception in Typically Developing 9- to 12-Year-Old Children

ERIC Educational Resources Information Center

Jacewicz, Ewa; Fox, Robert Allen

2014-01-01

Purpose: The purpose of this study was to investigate how linguistic knowledge interacts with indexical knowledge in older children's perception under demanding listening conditions created by extensive talker variability. Method: Twenty-five 9- to 12-year-old children, 12 from North Carolina (NC) and 13 from Wisconsin (WI), identified 12 vowels…

The effects of dance music jump rope exercise on pulmonary function and body mass index after music jump rope exercise in overweight adults in 20's.

PubMed

Seo, KyoChul

2017-08-01

[Purpose] The purpose of this study was to examine the effect of a dance music jump rope exercise on changes Pulmonary Function and body mass index in female overweight subjects in their 20's. [Subjects and Methods] The subjects were randomly assigned to the dance music jump rope exercise group and the stationary cycle exercise group. All subjects have conducted the exercises three times a week for four weeks. Pulmonary function was evaluated using a spirometer, and body mass index was evaluated using an InBody 3.0. [Results] The findings of this study showed significant improvements in the voluntary capacity and body mass index of the experimental groups. Vital capacity was higher in the music jump rope exercise group than the stationary cycle exercise group, and body mass index was lower in the music jump rope exercise group than the stationary cycle exercise group. [Conclusion] This study showed that the dance music jump rope exercise can be used to improve vital capacity and body mass index.

Assessing and monitoring the ecotoxicity of pulp and paper wastewater for irrigating reed fields using the polyurethane foam unit method based on monitoring protozoal communities.

PubMed

Ding, Cheng; Chen, Tianming; Li, Zhaoxia; Yan, Jinlong

2015-05-01

Using the standardized polyurethane foam unit (PFU) method, a preliminary investigation was carried out on the bioaccumulation and the ecotoxic effects of the pulp and paper wastewater for irrigating reed fields. Static ectoxicity test had shown protozoal communities were very sensitive to variations in toxin time and effective concentration (EC) of the pulp and paper wastewater. Shannon-Wiener diversity index (H) was a more suitable indicator of the extent of water pollution than Gleason and Margalef diversity index (d), Simpson's diversity index (D), and Pielou's index (J). The regression equation between S eq and EC was S eq  = - 0.118EC + 18.554. The relatively safe concentration and maximum acceptable toxicant concentration (MATC) of the wastewater for the protozoal communities were about 20 % and 42 %, respectively. To safely use this wastewater for irrigation, more than 58 % of the toxins must be removed or diluted by further processing. Monitoring of the wastewater in representative irrigated reed fields showed that the regularity of the protozoal colonization process was similar to the static ectoxicity, indicating that the toxicity of the irrigating pulp and paper wastewater was not lethal to protozoal communities in the reed fields. This study demonstrated the applicability of the PFU method in monitoring the ecotoxic effects of pulp and paper wastewater on the level of microbial communities and may guide the supervision and control of pulp and paper wastewater irrigating within the reed fields ecological system (RFES).

Design of a robust fuzzy controller for the arc stability of CO(2) welding process using the Taguchi method.

PubMed

Kim, Dongcheol; Rhee, Sehun

2002-01-01

CO(2) welding is a complex process. Weld quality is dependent on arc stability and minimizing the effects of disturbances or changes in the operating condition commonly occurring during the welding process. In order to minimize these effects, a controller can be used. In this study, a fuzzy controller was used in order to stabilize the arc during CO(2) welding. The input variable of the controller was the Mita index. This index estimates quantitatively the arc stability that is influenced by many welding process parameters. Because the welding process is complex, a mathematical model of the Mita index was difficult to derive. Therefore, the parameter settings of the fuzzy controller were determined by performing actual control experiments without using a mathematical model of the controlled process. The solution, the Taguchi method was used to determine the optimal control parameter settings of the fuzzy controller to make the control performance robust and insensitive to the changes in the operating conditions.

Multi-Hierarchical Gray Correlation Analysis Applied in the Selection of Green Building Design Scheme

NASA Astrophysics Data System (ADS)

Wang, Li; Li, Chuanghong

2018-02-01

As a sustainable form of ecological structure, green building is widespread concerned and advocated in society increasingly nowadays. In the survey and design phase of preliminary project construction, carrying out the evaluation and selection of green building design scheme, which is in accordance with the scientific and reasonable evaluation index system, can improve the ecological benefits of green building projects largely and effectively. Based on the new Green Building Evaluation Standard which came into effect on January 1, 2015, the evaluation index system of green building design scheme is constructed taking into account the evaluation contents related to the green building design scheme. We organized experts who are experienced in construction scheme optimization to mark and determine the weight of each evaluation index through the AHP method. The correlation degree was calculated between each evaluation scheme and ideal scheme by using multilevel gray relational analysis model and then the optimal scheme was determined. The feasibility and practicability of the evaluation method are verified by introducing examples.

A novel method to construct an air quality index based on air pollution profiles.

PubMed

Thach, Thuan-Quoc; Tsang, Hilda; Cao, Peihua; Ho, Lai-Ming

2018-01-01

Air quality indices based on the maximum of sub-indices of pollutants are easy to produce and help quantify the degree of air pollution. However, they discount the additive effects of multiple pollutants and are only sensitive to changes in highest sub-index. We propose a simple and concise method to construct an air quality index that takes into account additive effects of multiple pollutants and evaluate the extent to which this index predicts health effects. We obtained concentrations of four criteria pollutants: particulate matter with aerodynamic diameter ≤ 10μm (PM 10 ), sulphur dioxide (SO 2 ), nitrogen dioxide (NO 2 ) and ozone (O 3 ) and daily admissions to Hong Kong hospitals for cardiovascular and respiratory diseases for all ages and those 65 years or older for years 2001-2012. We derived sub-indices of the four criteria pollutants, calculated by normalizing pollutant concentrations to their respective short-term WHO Air Quality Guidelines (WHO AQG). We aggregated the sub-indices using the root-mean-power function with an optimal power to form an overall air quality index. The optimal power was determined by minimizing the sum of over- and under-estimated days. We then assessed associations between the pollution bands of the index and cardiovascular and respiratory admissions using a time-stratified case-crossover design adjusted for ambient temperature, relative humidity and influenza epidemics. Further, we conducted case-crossover analyses using the Hong Kong air quality data with the respective standards and classification of pollution bands of the China Air Quality Index (AQI), the United Kingdom Daily AQI (DAQI), and the United States Environmental Protection Agency (USEPA) AQI. The mean concentrations of PM 10 and SO 2 based on maximum 3-h mean exceeded the WHO AQG by 37% and 50%, respectively. We identified the combined condition of observed high-pollution days as either at least one pollutant > 1.5×WHO AQG or at least two pollutants > 1.0×WHO AQG to characterize the typical pollution profiles over the study period, which resulted in the optimal power=3.0. The distribution of days in different pollution bands of the index was: 5.8% for "Low" (0-50), 37.6% for "Moderate" (51-100), 31.1% for "High" (101-150), 14.7% for "Very High" (151-200), and 10.8% for "Serious" (201+). For cardiovascular and respiratory admissions, there were significant associations with the pollution bands of the index for all ages and those 65 years or older. The trends of increasing pollution bands in relation to increasing excess risks of cardiovascular and respiratory admissions were significant for the proposed index, the China AQI, the UK DAQI and the USEPA AQI (P value for test for linear trend < 0.0001), suggesting a dose-response relation. We have developed a simple and concise method to construct an air quality index that accounts for multiple pollutants to quantify air quality conditions for Hong Kong. Further developments are needed in order to support the extension of the method to other settings. Copyright © 2017 Elsevier GmbH. All rights reserved.

Prepregnancy body mass index, gestational weight gain, and birth weight in the BRISA cohort.

PubMed

Lima, Raina Jansen Cutrim Propp; Batista, Rosângela Fernandes Lucena; Ribeiro, Marizélia Rodrigues Costa; Ribeiro, Cecília Cláudia Costa; Simões, Vanda Maria Ferreira; Lima Neto, Pedro Martins; Silva, Antônio Augusto Moura da; Bettiol, Heloisa

2018-01-01

OBJECTIVE To analyze the effects of maternal pre-pregnancy body mass index and weight gain during pregnancy on the baby's birth weight. METHODS We conducted a cross-sectional study with 5,024 mothers and their newborns using a Brazilian birth cohort study. In the proposed model, estimated by structural equation modeling, we tested socioeconomic status, age, marital status, pre-pregnancy body mass index, smoking habit and alcohol consumption during pregnancy, hypertension and gestational diabetes, gestational weight gain, and type of delivery as determinants of the baby's birth weight. RESULTS For a gain of 4 kg/m2 (1 Standard Deviation [SD]) in pre-pregnancy body mass index, there was a 0.126 SD increase in birth weight, corresponding to 68 grams (p < 0.001). A 6 kg increase (1 SD) in gestational weight gain represented a 0.280 SD increase in newborn weight, correponding to 151.2 grams (p < 0.001). The positive effect of pre-pregnancy body mass index on birth weight was direct (standardized coefficient [SC] = 0.202; p < 0.001), but the negative indirect effect was small (SC = -0.076, p < 0.001) and partially mediated by the lower weight gain during pregnancy (SC = -0.070, p < 0.001). The positive effect of weight gain during pregnany on birth weight was predominantly direct (SC = 0.269, p < 0.001), with a small indirect effect of cesarean delivery (SC = 0.011; p < 0.001). Women with a higher pre-pregnancy body mass index gained less weight during pregnancy (p < 0.001). CONCLUSIONS The effect of gestational weight gain on the increase in birth weight was greater than that of pre-pregnancy body mass index.

Drought severity in intensive agricultural areas by means of the EDI index

NASA Astrophysics Data System (ADS)

Procházková, Petra; Chuchma, Filip; Středa, Tomáš

2016-12-01

The aim of this work was the evaluation of drought severity development in the Czech Republic for the period 1971-2015 by the means of the Effective Drought Index (EDI). Annual values of the EDI index were determined using the method of effective precipitation for 14 localities spread throughout the Czech Republic (Central Europe). The seven categories were created according to obtained index values for the drought conditions determination for years during the period 1971-2015 through the percentile method. The annual index values were compared with acquired 2nd, 15th, 45th, 55th, 85th and 98th percentiles. Both the years with precipitation unfavourable conditions: 1972, 1973, 1984, 1990, 1991, 1992, 1993 and 2015 and the years with precipitation favourable conditions: 1977, 1987, 1995, 2001, 2002 and 2010 were determined. Precipitation conditions in the growing season from 61st to 180th day of the year were also analysed. This evaluation was conducted during the period 1971-2015 through the ten-day index values which were compared with acquired 2nd, 15th, 45th, 55th, 85th and 98th percentiles. Dry growing seasons occurred in 1973, 1974, 1976 and 1993. Wet growing seasons occurred in 1987, 2006 and 2010. Trend analysis of annual index values was performed through the Mann-Kendall test. Highly statistically significant increasing linear trends (P < 0.01) were found for four localities (Uherský Ostroh, Vysoká, Znojmo-Oblekovice and Žatec); statistically significant increasing trends (P < 0.05) were found for three localities (Brno-Chrlice, Lednice and Lípa). Based on the extrapolation of the trend, a slightly higher effective precipitation can be expected during the year in a substantial part of the country. However, these findings do not necessarily mean an optimal supply of agricultural land with water. Precipitation exhibits considerable unevenness of distribution through time. Given the increasing evapotranspiration demands of the environment their availability is limited.

Functional region prediction with a set of appropriate homologous sequences-an index for sequence selection by integrating structure and sequence information with spatial statistics

PubMed Central

2012-01-01

Background The detection of conserved residue clusters on a protein structure is one of the effective strategies for the prediction of functional protein regions. Various methods, such as Evolutionary Trace, have been developed based on this strategy. In such approaches, the conserved residues are identified through comparisons of homologous amino acid sequences. Therefore, the selection of homologous sequences is a critical step. It is empirically known that a certain degree of sequence divergence in the set of homologous sequences is required for the identification of conserved residues. However, the development of a method to select homologous sequences appropriate for the identification of conserved residues has not been sufficiently addressed. An objective and general method to select appropriate homologous sequences is desired for the efficient prediction of functional regions. Results We have developed a novel index to select the sequences appropriate for the identification of conserved residues, and implemented the index within our method to predict the functional regions of a protein. The implementation of the index improved the performance of the functional region prediction. The index represents the degree of conserved residue clustering on the tertiary structure of the protein. For this purpose, the structure and sequence information were integrated within the index by the application of spatial statistics. Spatial statistics is a field of statistics in which not only the attributes but also the geometrical coordinates of the data are considered simultaneously. Higher degrees of clustering generate larger index scores. We adopted the set of homologous sequences with the highest index score, under the assumption that the best prediction accuracy is obtained when the degree of clustering is the maximum. The set of sequences selected by the index led to higher functional region prediction performance than the sets of sequences selected by other sequence-based methods. Conclusions Appropriate homologous sequences are selected automatically and objectively by the index. Such sequence selection improved the performance of functional region prediction. As far as we know, this is the first approach in which spatial statistics have been applied to protein analyses. Such integration of structure and sequence information would be useful for other bioinformatics problems. PMID:22643026

A Simple and Effective Image Normalization Method to Monitor Boreal Forest Change in a Siberian Burn Chronosequence across Sensors and across Time

NASA Astrophysics Data System (ADS)

Chen, X.; Vierling, L. A.; Deering, D. W.

2004-12-01

Satellite data offer unique perspectives for monitoring and quantifying land cover change, however, the radiometric consistency among co-located multi-temporal images is difficult to maintain due to variations in sensors and atmosphere. To detect accurate landscape change using multi-temporal images, we developed a new relative radiometric normalization scheme: the temporally invariant cluster (TIC) method. Image data were acquired on 9 June 1990 (Landsat 4), 20 June 2000, and 26 August 2001 (Landsat 7) for analyses over boreal forests near the Siberian city of Krasnoyarsk. Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), and Reduced Simple Ratio (RSR) were investigated in the normalization study. The temporally invariant cluster (TIC) centers were identified through a point density map of the base image and the target image and a normalization regression line was created through all TIC centers. The target image digital data were then converted using the regression function so that the two images could be compared using the resulting common radiometric scale. We found that EVI was very sensitive to vegetation structure and could thus be used to separate conifer forests from deciduous forests and grass/crop lands. NDVI was a very effective vegetation index to reduce the influence of shadow, while EVI was very sensitive to shadowing. After normalization, correlations of NDVI and EVI with field collected total Leaf Area Index (LAI) data in 2000 and 2001 were significantly improved; the r-square values in these regressions increased from 0.49 to 0.69 and from 0.46 to 0.61, respectively. An EVI ¡°cancellation effect¡± where EVI was positively related to understory greenness but negatively related to forest canopy coverage was evident across a post fire chronosequence. These findings indicate that the TIC method provides a simple, effective and repeatable method to create radiometrically comparable data sets for remote detection of landscape change. Compared with some previous relative normalization methods, this new method can avoid subjective selection of a normalization regression line. It does not require high level programming and statistical analyses, yet remains sensitive to landscape changes occurring over seasonal and inter-annual time scales. In addition, the TIC method maintains sensitivity to subtle changes in vegetation phenology and enables normalization even when invariant features are rare.

The Efficacy of Landscape-Level Conservation in Changbai Mountain Biosphere Reserve, China

PubMed Central

Zhang, Jianliang; Liu, Fangzheng; Cui, Guofa

2014-01-01

Anthropogenic landscape alteration is rather common in many protected areas (PAs), jeopardizing the efficacy of PAs conservation. However, the general consensus is that PAs still remain effective in habitat conservation. To assess the efficacy of landscape-level conservation, we examined landscape alterations in the Changbai Mountain Biosphere Reserve (CMBR), which was established in 1960 as a “flagship” protected area in China. Based on analyses of high-resolution satellite images and data of forest inventory, field survey and interview, we developed two new indexes to assess the efficacy of landscape conservation, i.e. the quality index of protected landscape and the interference index of anthropogenic landscape. From 1993 to 2012, the quality index increased from 74.48 to 75.50, and the interference index decreased from 0.49 to 0.06, suggesting that the overall quality of protected landscape improved and the degree of anthropogenic interference decreased in CMBR. The increase in landscape quality was mainly due to the progressive vegetation recovery of previous cutover land in the windthrow area, the cease of the use of the cultivated land, and the amelioration of spatial pattern of protected landscape. We conclude that the current landscape conservation methods used in CMBR are effective, and the method we developed has the potential to be used to assess the efficacy of landscape-level conservation in nature reserves worldwide. PMID:24743693

Quantum-behaved particle swarm optimization for the synthesis of fibre Bragg gratings filter

NASA Astrophysics Data System (ADS)

Yu, Xuelian; Sun, Yunxu; Yao, Yong; Tian, Jiajun; Cong, Shan

2011-12-01

A method based on the quantum-behaved particle swarm optimization algorithm is presented to design a bandpass filter of the fibre Bragg gratings. In contrast to the other optimization algorithms such as the genetic algorithm and particle swarm optimization algorithm, this method is simpler and easier to implement. To demonstrate the effectiveness of the QPSO algorithm, we consider a bandpass filter. With the parameters the half the bandwidth of the filter 0.05 nm, the Bragg wavelength 1550 nm, the grating length with 2cm is divided into 40 uniform sections and its index modulation is what should be optimized and whole feasible solution space is searched for the index modulation. After the index modulation profile is known for all the sections, the transfer matrix method is used to verify the final optimal index modulation by calculating the refection spectrum. The results show the group delay is less than 12ps in band and the calculated dispersion is relatively flat inside the passband. It is further found that the reflective spectrum has sidelobes around -30dB and the worst in-band dispersion value is less than 200ps/nm . In addition, for this design, it takes approximately several minutes to find the acceptable index modulation values with a notebook computer.

Quality planning in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

The purpose of this paper is to investigate deeper on the factors that contribute to the effectiveness of quality planning, identifying the common problems encountered in quality planning, practices and ways for improvements in quality planning for construction projects. This paper involves data collected from construction company representatives across Malaysia that are obtained through semi-structured interviews as well as questionnaire distributions. Results shows that design of experiments (average index: 4.61), inspection (average index: 4.45) and quality audit as well as other methods (average index: 4.26) rank first, second and third most important factors respectively.

High-Density Near-Field Readout over 50 GB Capacity Using Solid Immersion Lens with High Refractive Index

NASA Astrophysics Data System (ADS)

Shinoda, Masataka; Saito, Kimihiro; Kondo, Takao; Ishimoto, Tsutomu; Nakaoki, Ariyoshi

2003-02-01

We have investigated high-density near-field readout using a solid immersion lens with a high refractive index. By using a glass material with a high refractive index of 2.08, we developed an optical pick-up with the effective numerical aperture of 1.8. We could observe a clear eye pattern for a 50 GB capacity disc in 120 mm diameter. We confirmed that the near-field readout system is promising method of realizing a high-density optical disc system.

Gradient-index crystalline lens model: A new method for determining the paraxial properties by the axial and field rays

NASA Astrophysics Data System (ADS)

Rama, María. Angeles; Pérez, María. Victoria; Bao, Carmen; Flores-Arias, María. Teresa; Gómez-Reino, Carlos

2005-05-01

Gradient-index (GRIN) models of the human lens have received wide attention in optometry and vision sciences for considering the effect of inhomogeneity of the refractive index on the optical properties of the lens. This paper uses the continuous asymmetric bi-elliptical model to determine analytically cardinal elements, magnifications and refractive power of the lens by the axial and field rays in order to study the paraxial light propagation through the human lens from its GRIN nature.

High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice.

PubMed

Wang, Haiyang; Yan, Xin; Li, Shuguang; An, Guowen; Zhang, Xuenan

2016-10-08

A refractive index sensor based on dual-core photonic crystal fiber (PCF) with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM). Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33-1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit) when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity.

World Biomedical Journals, 1951-60: A Study of the Relative Significance of 1,388 Titles Indexed in Current List of Medical Literature*

PubMed Central

Raisig, L. Miles

1966-01-01

This study is an application of the relationship of serial articles published to serial articles cited, developed in theory in the author's “Statistical Bibliography in the Health Sciences” (Bulletin 50: 450-461, July 1962). A ranked list of the indexes of significance of most of the serials indexed in Current List of Medical Literature was derived and erected from 21,000 citations secured in a random sampling of 1962 and 1961 biomedical journals regularly received in the Yale Medical Library. The author measures the gross indexing effectiveness of Current List against his indexes of significance, offers his method and results as means to reach objective standards for indexing and abstracting, and projects his results as measures of general value of the serials analyzed. PMID:5952248

High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice

PubMed Central

Wang, Haiyang; Yan, Xin; Li, Shuguang; An, Guowen; Zhang, Xuenan

2016-01-01

A refractive index sensor based on dual-core photonic crystal fiber (PCF) with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM). Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33–1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit) when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity. PMID:27740607

Deep Constrained Siamese Hash Coding Network and Load-Balanced Locality-Sensitive Hashing for Near Duplicate Image Detection.

PubMed

Hu, Weiming; Fan, Yabo; Xing, Junliang; Sun, Liang; Cai, Zhaoquan; Maybank, Stephen

2018-09-01

We construct a new efficient near duplicate image detection method using a hierarchical hash code learning neural network and load-balanced locality-sensitive hashing (LSH) indexing. We propose a deep constrained siamese hash coding neural network combined with deep feature learning. Our neural network is able to extract effective features for near duplicate image detection. The extracted features are used to construct a LSH-based index. We propose a load-balanced LSH method to produce load-balanced buckets in the hashing process. The load-balanced LSH significantly reduces the query time. Based on the proposed load-balanced LSH, we design an effective and feasible algorithm for near duplicate image detection. Extensive experiments on three benchmark data sets demonstrate the effectiveness of our deep siamese hash encoding network and load-balanced LSH.

The effect of isoflurane anesthesia on the electroencephalogram assessed by harmonic wavelet bicoherence-based indices

NASA Astrophysics Data System (ADS)

Li, Duan; Li, Xiaoli; Hagihira, Satoshi; Sleigh, Jamie W.

2011-10-01

Bicoherence quantifies the degree of quadratic phase coupling among different frequency components within a signal. Previous studies, using Fourier-based methods of bicoherence calculation (FBIC), have demonstrated that electroencephalographic bicoherence can be related to the end-tidal concentration of inhaled anesthetic drugs. However, FBIC methods require excessively long sections of the encephalogram. This problem might be overcome by the use of wavelet-based methods. In this study, we compare FBIC and a recently developed wavelet bicoherence (WBIC) method as a tool to quantify the effect of isoflurane on the electroencephalogram. We analyzed a set of previously published electroencephalographic data, obtained from 29 patients who underwent elective abdominal surgery under isoflurane general anesthesia combined with epidural anesthesia. Nine potential indices of the electroencephalographic anesthetic effect were obtained from the WBIC and FBIC techniques. The relationship between each index and end-tidal concentrations of isoflurane was evaluated using correlation coefficients (r), the inter-individual variations (CV) of index values, the coefficient of determination (R2) of the PKPD models and the prediction probability (PK). The WBIC-based indices tracked anesthetic effects better than the traditional FBIC-based ones. The DiagBic_En index (derived from the Shannon entropy of the diagonal bicoherence values) performed best [r = 0.79 (0.66-0.92), CV = 0.08 (0.05-0.12), R2 = 0.80 (0.75-0.85), PK = 0.79 (0.75-0.83)]. Short data segments of ~10-30 s were sufficient to reliably calculate the indices of WBIC. The wavelet-based bicoherence has advantages over the traditional Fourier-based bicoherence in analyzing volatile anesthetic effects on the electroencephalogram.

Density estimation in wildlife surveys

Treesearch

Jonathan Bart; Sam Droege; Paul Geissler; Bruce Peterjohn; C. John Ralph

2004-01-01

Several authors have recently discussed the problems with using index methods to estimate trends in population size. Some have expressed the view that index methods should virtually never be used. Others have responded by defending index methods and questioning whether better alternatives exist. We suggest that index methods are often a costeffective component of valid...

Novel analytical approach for strongly coupled waveguide arrays

NASA Astrophysics Data System (ADS)

Kohli, Niharika; Srivastava, Sangeeta; Sharma, Enakshi K.

2018-02-01

Coupled Mode theory and Variational methods are the most extensively used analytical methods for the study of coupled optical waveguides. In this paper we have discussed a variation of the Ritz Galerkin Variational method (RGVM) wherein the trial field is a superposition of an orthogonal basis set which in turn is generated from superposition of the individual waveguide modal fields using Gram Schmidt Orthogonalization Procedure (GSOP). The conventional coupled mode theory (CCMT), a modified coupled mode theory (MCMT) incorporating interaction terms that are neglected in CCMT, and an RGVM using orthogonal basis set (RG-GSOP) are compared for waveguide arrays of different materials. The exact effective indices values for these planar waveguide arrays are also studied. The different materials have their index-contrasts ranging between the GaAs/ AlGaAs system to Si/SiO2 system. It has been shown that the error in the effective indices values obtained from MCMT and CCMT is higher than RGVM-GSOP especially in the case of higher index-contrast. Therefore, for accurate calculations of the modal characteristics of planar waveguide arrays, even at higher index-contrasts, RGVM-GSOP is the best choice. Moreover, we obtain obviously orthogonal supermode fields and Hermitian matrix from RGVM-GSOP.

Effective use of latent semantic indexing and computational linguistics in biological and biomedical applications.

PubMed

Chen, Hongyu; Martin, Bronwen; Daimon, Caitlin M; Maudsley, Stuart

2013-01-01

Text mining is rapidly becoming an essential technique for the annotation and analysis of large biological data sets. Biomedical literature currently increases at a rate of several thousand papers per week, making automated information retrieval methods the only feasible method of managing this expanding corpus. With the increasing prevalence of open-access journals and constant growth of publicly-available repositories of biomedical literature, literature mining has become much more effective with respect to the extraction of biomedically-relevant data. In recent years, text mining of popular databases such as MEDLINE has evolved from basic term-searches to more sophisticated natural language processing techniques, indexing and retrieval methods, structural analysis and integration of literature with associated metadata. In this review, we will focus on Latent Semantic Indexing (LSI), a computational linguistics technique increasingly used for a variety of biological purposes. It is noted for its ability to consistently outperform benchmark Boolean text searches and co-occurrence models at information retrieval and its power to extract indirect relationships within a data set. LSI has been used successfully to formulate new hypotheses, generate novel connections from existing data, and validate empirical data.

Multiscale rescaled range analysis of EEG recordings in sevoflurane anesthesia.

PubMed

Liang, Zhenhu; Li, Duan; Ouyang, Gaoxiang; Wang, Yinghua; Voss, Logan J; Sleigh, Jamie W; Li, Xiaoli

2012-04-01

The Hurst exponent (HE) is a nonlinear method measuring the smoothness of a fractal time series. In this study we applied the HE index, extracted from electroencephalographic (EEG) recordings, as a measure of anesthetic drug effects on brain activity. In 19 adult patients undergoing sevoflurane general anesthesia, we calculated the HE of the raw EEG; comparing the maximal overlap discrete wavelet transform (MODWT) with the traditional rescaled range (R/S) analysis techniques, and with a commercial index of depth of anesthesia - the response entropy (RE). We analyzed each wavelet-decomposed sub-band as well as the combined low frequency bands (HEOLFBs). The methods were compared in regard to pharmacokinetic/pharmacodynamic (PK/PD) modeling, and prediction probability. All the low frequency band HE indices decreased when anesthesia deepened. However the HEOLFB was the best index because: it was less sensitive to artifacts, most closely tracked the exact point of loss of consciousness, showed a better prediction probability in separating the awake and unconscious states, and tracked sevoflurane concentration better - as estimated by the PK/PD models. The HE is a useful measure for estimating the depth of anesthesia. It was noted that HEOLFB showed the best performance for tracking drug effect. The HEOLFB could be used as an index for accurately estimating the effect of anesthesia on brain activity. Copyright © 2011 International Federation of Clinical Neurophysiology. All rights reserved.

Association between different measurements of blood pressure variability by ABP monitoring and ankle-brachial index.

PubMed

Wittke, Estefânia; Fuchs, Sandra C; Fuchs, Flávio D; Moreira, Leila B; Ferlin, Elton; Cichelero, Fábio T; Moreira, Carolina M; Neyeloff, Jeruza; Moreira, Marina B; Gus, Miguel

2010-11-05

Blood pressure (BP) variability has been associated with cardiovascular outcomes, but there is no consensus about the more effective method to measure it by ambulatory blood pressure monitoring (ABPM). We evaluated the association between three different methods to estimate BP variability by ABPM and the ankle brachial index (ABI). In a cross-sectional study of patients with hypertension, BP variability was estimated by the time rate index (the first derivative of SBP over time), standard deviation (SD) of 24-hour SBP; and coefficient of variability of 24-hour SBP. ABI was measured with a doppler probe. The sample included 425 patients with a mean age of 57 ± 12 years, being 69.2% women, 26.1% current smokers and 22.1% diabetics. Abnormal ABI (≤ 0.90 or ≥ 1.40) was present in 58 patients. The time rate index was 0.516 ± 0.146 mmHg/min in patients with abnormal ABI versus 0.476 ± 0.124 mmHg/min in patients with normal ABI (P = 0.007). In a logistic regression model the time rate index was associated with ABI, regardless of age (OR = 6.9, 95% CI = 1.1- 42.1; P = 0.04). In a multiple linear regression model, adjusting for age, SBP and diabetes, the time rate index was strongly associated with ABI (P < 0.01). None of the other indexes of BP variability were associated with ABI in univariate and multivariate analyses. Time rate index is a sensible method to measure BP variability by ABPM. Its performance for risk stratification of patients with hypertension should be explored in longitudinal studies.

Yarding-method and slash-treatment effects on compaction, humus, and variation in plantation soils.

Treesearch

Don Minore; Howard G. Weatherly

1988-01-01

Soil penetration-resistance and soil-humus frequency were measured on 86 progeny-test plantations in southwestern Oregon to determine the effects of yarding method and slash treatment on soil compaction and humus, and a disturbance index was calculated for each plantation. Compaction and humus loss were more severe on tractor-yarded, machine-piled plantations than on...

Evaluating the Impact of Various Parameters on the Gamma Index Values of 2D Diode Array in IMRT Verification

PubMed Central

Jabbari, Keyvan; Pashaei, Fakhereh; Ay, Mohammad R.; Amouheidari, Alireza; Tavakoli, Mohammad B.

2018-01-01

Background: MapCHECK2 is a two-dimensional diode arrays planar dosimetry verification system. Dosimetric results are evaluated with gamma index. This study aims to provide comprehensive information on the impact of various factors on the gamma index values of MapCHECK2, which is mostly used for IMRT dose verification. Methods: Seven fields were planned for 6 and 18 MV photons. The azimuthal angle is defined as any rotation of collimators or the MapCHECK2 around the central axis, which was varied from 5 to −5°. The gantry angle was changed from −8 to 8°. Isodose sampling resolution was studied in the range of 0.5 to 4 mm. The effects of additional buildup on gamma index in three cases were also assessed. Gamma test acceptance criteria were 3%/3 mm. Results: The change of azimuthal angle in 5° interval reduced gamma index value by about 9%. The results of putting buildups of various thicknesses on the MapCHECK2 surface showed that gamma index was generally improved in thicker buildup, especially for 18 MV. Changing the sampling resolution from 4 to 2 mm resulted in an increase in gamma index by about 3.7%. The deviation of the gantry in 8° intervals in either directions changed the gamma index only by about 1.6% for 6 MV and 2.1% for 18 MV. Conclusion: Among the studied parameters, the azimuthal angle is one of the most effective factors on gamma index value. The gantry angle deviation and sampling resolution are less effective on gamma index value reduction. PMID:29535922

[Study on method and its optimization of improving seed germination of Astragalus membranaceus as gansu traditional medicinal herb].

PubMed

Shi, Li-Ping; Ou, Qiao-Ming; Cui, Wen-Juan; Chen, Yu-Liang

2014-04-01

To break the hard testa and improve seed germination situation of Astragalus membranaceus var. mongholicus, in order to solve the problems of low success rate of seed germination and seedling. Longxi Astragalus membranaceus var. mongholicus seed was treated by soaking seed with 75% alcohol and concentrated sulfuric acid, warm-water incubating, grinding and comprehensive treating with warm-water incubating, grinding and sand culture. Its seed germination situation was evaluated by germination potential, germination rate and germination index. Different processing methods significantly improved seed germination with different effect. Comprehensive treatment with warm-water incubating, grinding and sand culture was the best one on Astragalus membranaceus var. mongholicus seed germination. Its germination potential, germination rate and germination index was 66.04%, 87.70% and 1.34,respectively. Comprehensive treatment with warm-water incubating, grinding and sand culture is an economic and effective processing method, which is suitable for actual production.

Discovering relevance knowledge in data: a growing cell structures approach.

PubMed

Azuaje, F; Dubitzky, W; Black, N; Adamson, K

2000-01-01

Both information retrieval and case-based reasoning systems rely on effective and efficient selection of relevant data. Typically, relevance in such systems is approximated by similarity or indexing models. However, the definition of what makes data items similar or how they should be indexed is often nontrivial and time-consuming. Based on growing cell structure artificial neural networks, this paper presents a method that automatically constructs a case retrieval model from existing data. Within the case-based reasoning (CBR) framework, the method is evaluated for two medical prognosis tasks, namely, colorectal cancer survival and coronary heart disease risk prognosis. The results of the experiments suggest that the proposed method is effective and robust. To gain a deeper insight and understanding of the underlying mechanisms of the proposed model, a detailed empirical analysis of the models structural and behavioral properties is also provided.

Performance assessment of static lead-lag feedforward controllers for disturbance rejection in PID control loops.

PubMed

Yu, Zhenpeng; Wang, Jiandong

2016-09-01

This paper assesses the performance of feedforward controllers for disturbance rejection in univariate feedback plus feedforward control loops. The structures of feedback and feedforward controllers are confined to proportional-integral-derivative and static-lead-lag forms, respectively, and the effects of feedback controllers are not considered. The integral squared error (ISE) and total squared variation (TSV) are used as performance metrics. A performance index is formulated by comparing the current ISE and TSV metrics to their own lower bounds as performance benchmarks. A controller performance assessment (CPA) method is proposed to calculate the performance index from measurements. The proposed CPA method resolves two critical limitations in the existing CPA methods, in order to be consistent with industrial scenarios. Numerical and experimental examples illustrate the effectiveness of the obtained results. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

[Electrical acupoint stimulation increases athletes' rapid strength].

PubMed

Yang, Hua-yuan; Liu, Tang-yi; Kuai, Le; Gao, Ming

2006-05-01

To search for a stimulation method for increasing athletes' performance. One hundred and fifty athletes were randomly divided into a trial group and a control group, 75 athletes in each group. Acupoints were stimulated with audio frequency pulse modulated wave and multi-blind method were used to investigate effects of the electric stimulation of acupoints on 30-meter running, standing long jumping and Cybex isokinetic testing index. The acupoint electric stimulation method could significantly increase athlete's performance (P < 0.05), and the biomechanical indexes, maximal peak moment of force (P < 0.05), force moment accelerating energy (P < 0.05) and average power (P < 0.05). Electrical acupoint stimulation can enhance athlete's rapid strength.

Exploration Opportunity Search of Near-earth Objects Based on Analytical Gradients

NASA Astrophysics Data System (ADS)

Ren, Yuan; Cui, Ping-Yuan; Luan, En-Jie

2008-07-01

The problem of search of opportunity for the exploration of near-earth minor objects is investigated. For rendezvous missions, the analytical gradients of the performance index with respect to the free parameters are derived using the variational calculus and the theory of state-transition matrix. After generating randomly some initial guesses in the search space, the performance index is optimized, guided by the analytical gradients, leading to the local minimum points representing the potential launch opportunities. This method not only keeps the global-search property of the traditional method, but also avoids the blindness in the latter, thereby increasing greatly the computing speed. Furthermore, with this method, the searching precision could be controlled effectively.

Search of exploration opportunity for near earth objects based on analytical gradients

NASA Astrophysics Data System (ADS)

Ren, Y.; Cui, P. Y.; Luan, E. J.

2008-01-01

The problem of searching for exploration opportunity of near Earth objects is investigated. For rendezvous missions, the analytical gradients of performance index with respect to free parameters are derived by combining the calculus of variation with the theory of state-transition matrix. Then, some initial guesses are generated random in the search space, and the performance index is optimized with the guidance of analytical gradients from these initial guesses. This method not only keeps the property of global search in traditional method, but also avoids the blindness in the traditional exploration opportunity search; hence, the computing speed could be increased greatly. Furthermore, by using this method, the search precision could be controlled effectively.

Generalized Weierstrass-Mandelbrot Function Model for Actual Stocks Markets Indexes with Nonlinear Characteristics

NASA Astrophysics Data System (ADS)

Zhang, L.; Yu, C.; Sun, J. Q.

2015-03-01

It is difficult to simulate the dynamical behavior of actual financial markets indexes effectively, especially when they have nonlinear characteristics. So it is significant to propose a mathematical model with these characteristics. In this paper, we investigate a generalized Weierstrass-Mandelbrot function (WMF) model with two nonlinear characteristics: fractal dimension D where 2 > D > 1.5 and Hurst exponent (H) where 1 > H > 0.5 firstly. And then we study the dynamical behavior of H for WMF as D and the spectrum of the time series γ change in three-dimensional space, respectively. Because WMF and the actual stock market indexes have two common features: fractal behavior using fractal dimension and long memory effect by Hurst exponent, we study the relationship between WMF and the actual stock market indexes. We choose a random value of γ and fixed value of D for WMF to simulate the S&P 500 indexes at different time ranges. As shown in the simulation results of three-dimensional space, we find that γ is important in WMF model and different γ may have the same effect for the nonlinearity of WMF. Then we calculate the skewness and kurtosis of actual Daily S&P 500 index in different time ranges which can be used to choose the value of γ. Based on these results, we choose appropriate γ, D and initial value into WMF to simulate Daily S&P 500 indexes. Using the fit line method in two-dimensional space for the simulated values, we find that the generalized WMF model is effective for simulating different actual stock market indexes in different time ranges. It may be useful for understanding the dynamical behavior of many different financial markets.

Measurement of the Microwave Refractive Index of Materials Based on Parallel Plate Waveguides

NASA Astrophysics Data System (ADS)

Zhao, F.; Pei, J.; Kan, J. S.; Zhao, Q.

2017-12-01

An electrical field scanning apparatus based on a parallel plate waveguide method is constructed, which collects the amplitude and phase matrices as a function of the relative position. On the basis of such data, a method for calculating the refractive index of the measured wedge samples is proposed in this paper. The measurement and calculation results of different PTFE samples reveal that the refractive index measured by the apparatus is substantially consistent with the refractive index inferred with the permittivity of the sample. The proposed refractive index calculation method proposed in this paper is a competitive method for the characterization of the refractive index of materials with positive refractive index. Since the apparatus and method can be used to measure and calculate arbitrary direction of the microwave propagation, it is believed that both of them can be applied to the negative refractive index materials, such as metamaterials or “left-handed” materials.

Fractal analysis of the short time series in a visibility graph method

NASA Astrophysics Data System (ADS)

Li, Ruixue; Wang, Jiang; Yu, Haitao; Deng, Bin; Wei, Xile; Chen, Yingyuan

2016-05-01

The aim of this study is to evaluate the performance of the visibility graph (VG) method on short fractal time series. In this paper, the time series of Fractional Brownian motions (fBm), characterized by different Hurst exponent H, are simulated and then mapped into a scale-free visibility graph, of which the degree distributions show the power-law form. The maximum likelihood estimation (MLE) is applied to estimate power-law indexes of degree distribution, and in this progress, the Kolmogorov-Smirnov (KS) statistic is used to test the performance of estimation of power-law index, aiming to avoid the influence of droop head and heavy tail in degree distribution. As a result, we find that the MLE gives an optimal estimation of power-law index when KS statistic reaches its first local minimum. Based on the results from KS statistic, the relationship between the power-law index and the Hurst exponent is reexamined and then amended to meet short time series. Thus, a method combining VG, MLE and KS statistics is proposed to estimate Hurst exponents from short time series. Lastly, this paper also offers an exemplification to verify the effectiveness of the combined method. In addition, the corresponding results show that the VG can provide a reliable estimation of Hurst exponents.

Assessment of sustainable urban transport development based on entropy and unascertained measure

PubMed Central

Li, Yancang; Yang, Jing; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development. PMID:29084281

A new method of Quickbird own image fusion

NASA Astrophysics Data System (ADS)

Han, Ying; Jiang, Hong; Zhang, Xiuying

2009-10-01

With the rapid development of remote sensing technology, the means of accessing to remote sensing data become increasingly abundant, thus the same area can form a large number of multi-temporal, different resolution image sequence. At present, the fusion methods are mainly: HPF, IHS transform method, PCA method, Brovey, Mallat algorithm and wavelet transform and so on. There exists a serious distortion of the spectrums in the IHS transform, Mallat algorithm omits low-frequency information of the high spatial resolution images, the integration results of which has obvious blocking effects. Wavelet multi-scale decomposition for different sizes, the directions, details and the edges can have achieved very good results, but different fusion rules and algorithms can achieve different effects. This article takes the Quickbird own image fusion as an example, basing on wavelet transform and HVS, wavelet transform and IHS integration. The result shows that the former better. This paper introduces the correlation coefficient, the relative average spectral error index and usual index to evaluate the quality of image.

EJSCREEN Version 1, EJ Index Alternatives

EPA Pesticide Factsheets

This map service displays alternative environmental justice (EJ) indexes used in EJSCREEN. The alternative EJ indexes combine each of the 12 environmental indicators and one of two demographic indexes using different methods than the Primary EJ Index. EJ Index Alternative 1 is a combination of a blockgroup environmental factor, the populaiton of the blockgroup, and the demographic index. This EJ Index measures how much a particular place contributes to the total burden faced by subpopulations highlighted by the demographic index. EJ Index Alternative 2 is a combination of a blockgroup environmental factor and the demographic index. Two options are presented for both EJ Index Alternative 1 and Alternative 2-- they are combined with the primary demographic index and alternative demographic index. EJSCREEN is an environmental justice screening tool that provides EPA with a nationally consistent approach to screening for potential areas of EJ concern that may warrant further investigation. The EJ indexes are block group level results that combine multiple demographic factors with a single environmental variable (such as proximity to traffic) that can be used to help identify communities living with the greatest potential for negative environmental and health effects. The EJSCREEN tool is currently for internal EPA use only. It is anticipated that as users become accustomed to this new tool, individual programs within the Agency will develop program use guidelines a

Speech communications in noise

NASA Technical Reports Server (NTRS)

1984-01-01

The physical characteristics of speech, the methods of speech masking measurement, and the effects of noise on speech communication are investigated. Topics include the speech signal and intelligibility, the effects of noise on intelligibility, the articulation index, and various devices for evaluating speech systems.

Research on power market technical analysis index system employing high-low matching mechanism

NASA Astrophysics Data System (ADS)

Li, Tao; Wang, Shengyu

2018-06-01

The power market trading technical analysis refers to a method that takes the bidding behavior of members in the power market as the research object, sums up some typical market rules and price trends by applying mathematical and logical methods, and finally can effectively assist members in the power market to make more reasonable trading decisions. In this paper, the following four indicators have been proposed: bidding price difference scale, extreme bidding price rate, dispersion of bidding price and monthly transaction satisfaction of electricity trading, which are the core of the index system.

Correction of stain variations in nuclear refractive index of clinical histology specimens

PubMed Central

Uttam, Shikhar; Bista, Rajan K.; Hartman, Douglas J.; Brand, Randall E.; Liu, Yang

2011-01-01

For any technique to be adopted into a clinical setting, it is imperative that it seamlessly integrates with well-established clinical diagnostic workflow. We recently developed an optical microscopy technique—spatial-domain low-coherence quantitative phase microscopy (SL-QPM) that can extract the refractive index of the cell nucleus from the standard histology specimens on glass slides prepared via standard clinical protocols. This technique has shown great potential in detecting cancer with a better sensitivity than conventional pathology. A major hurdle in the clinical translation of this technique is the intrinsic variation among staining agents used in histology specimens, which limits the accuracy of refractive index measurements of clinical samples. In this paper, we present a simple and easily generalizable method to remove the effect of variations in staining levels on nuclear refractive index obtained with SL-QPM. We illustrate the efficacy of our correction method by applying it to variously stained histology samples from animal model and clinical specimens. PMID:22112118

A study of the influence of regional environmental expenditure on air quality in China: the effectiveness of environmental policy.

PubMed

He, Lingyun; Wu, Meng; Wang, Deqing; Zhong, Zhangqi

2018-03-01

Based on the panel data model, data on environmental expenditures, the air quality index, economic aggregates, industrial structures, etc., of seven seriously polluted cities in China, from the period 2007-2015, were collected, and this paper estimates the general relationship between environmental expenditures and the air quality index. Besides, the impact of the fuel tax policy on air quality as well as on the relationship between environmental expenditure and the air quality index is tested using the method of regression discontinuity. We find that there is a long-term equilibrium relationship between environmental expenditure and air quality index as well as a 0.0507% positive effect of the former on the latter. Second, for Beijing, Taiyuan, Chongqing, and Lanzhou, a 1% increase in environmental expenditure leads to 0.0773, 0.0125, 0.0965, and 0.0912% decreases in the air quality index, respectively; however, for Shijiazhuang, Ji'nan, and Urumqi, effect of environmental expenditure on air quality is insignificant. Third, both economic growth and optimization of the industrial structure can lead to an improvement of air quality. Fourth, since the implementation of the fuel tax policy in 2009, the air quality of the sample cities has improved, and the pulling effect of environmental expenditure on the air quality index has decreased from 0.0507 to 0.0048%. Our findings cannot only clarify the effect of environmental expenditures on air quality but can also objectively judge the effectiveness of environmental policies of China to a certain extent. It may benefit Chinese government to effectively govern air pollution with fiscal tools in conjunction with economic and environmental characteristics.

HRV-derived data similarity and distribution index based on ensemble neural network for measuring depth of anaesthesia.

PubMed

Liu, Quan; Ma, Li; Chiu, Ren-Chun; Fan, Shou-Zen; Abbod, Maysam F; Shieh, Jiann-Shing

2017-01-01

Evaluation of depth of anaesthesia (DoA) is critical in clinical surgery. Indices derived from electroencephalogram (EEG) are currently widely used to quantify DoA. However, there are known to be inaccurate under certain conditions; therefore, experienced anaesthesiologists rely on the monitoring of vital signs such as body temperature, pulse rate, respiration rate, and blood pressure to control the procedure. Because of the lack of an ideal approach for quantifying level of consciousness, studies have been conducted to develop improved methods of measuring DoA. In this study, a short-term index known as the similarity and distribution index (SDI) is proposed. The SDI is generated using heart rate variability (HRV) in the time domain and is based on observations of data distribution differences between two consecutive 32 s HRV data segments. A comparison between SDI results and expert assessments of consciousness level revealed that the SDI has strong correlation with anaesthetic depth. To optimise the effect, artificial neural network (ANN) models were constructed to fit the SDI, and ANN blind cross-validation was conducted to overcome random errors and overfitting problems. An ensemble ANN was then employed and was discovered to provide favourable DoA assessment in comparison with commonly used Bispectral Index. This study demonstrated the effectiveness of this method of DoA assessment, and the results imply that it is feasible and meaningful to use the SDI to measure DoA with the additional use of other measurement methods, if appropriate.

Instrumental Variable Methods for Continuous Outcomes That Accommodate Nonignorable Missing Baseline Values.

PubMed

Ertefaie, Ashkan; Flory, James H; Hennessy, Sean; Small, Dylan S

2017-06-15

Instrumental variable (IV) methods provide unbiased treatment effect estimation in the presence of unmeasured confounders under certain assumptions. To provide valid estimates of treatment effect, treatment effect confounders that are associated with the IV (IV-confounders) must be included in the analysis, and not including observations with missing values may lead to bias. Missing covariate data are particularly problematic when the probability that a value is missing is related to the value itself, which is known as nonignorable missingness. In such cases, imputation-based methods are biased. Using health-care provider preference as an IV method, we propose a 2-step procedure with which to estimate a valid treatment effect in the presence of baseline variables with nonignorable missing values. First, the provider preference IV value is estimated by performing a complete-case analysis using a random-effects model that includes IV-confounders. Second, the treatment effect is estimated using a 2-stage least squares IV approach that excludes IV-confounders with missing values. Simulation results are presented, and the method is applied to an analysis comparing the effects of sulfonylureas versus metformin on body mass index, where the variables baseline body mass index and glycosylated hemoglobin have missing values. Our result supports the association of sulfonylureas with weight gain. © The Author 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

SU-E-T-60: A Plan Quality Index in IMRT QA That Is Independent of the Acceptance Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, D; Kang, S; Kim, T

2015-06-15

Purpose: In IMRT QA, plan quality evaluation is made based on pass rate under preset acceptance criteria, mostly using gamma-values. This method is convenient but, its Result highly depends on what the acceptance criteria are and suffers from the lack of sensitivity in judging how good the plan is. In this study, we introduced a simple but effective plan quality index of IMRT QA based on dose difference only to supplement such shortcomings, and investigated its validity. Methods: The proposed index is a single value which is calculated mainly based on point-by-point comparison between planned and measured dose distributions, andmore » it becomes “1” in an ideal case. A systematic evaluation was performed with one-dimensional test dose distributions. For 3 hypothetical dose profiles, various displacements (in both dose and space) were introduced, the proposed index was calculated for each case, and the behavior of obtained indices was analyzed and compared with that of gamma evaluation. In addition, the feasibility of the index was assessed with clinical IMRT/VMAT/SBRT QA cases for different sites (prostate, head & neck, liver, lung, spine, and abdomen). Results: The proposed index showed more robust correlation with the amount of induced displacement compared to the gamma evaluation method. No matter what the acceptance criteria are (e.g., whether 3%/3mm or 2%/2mm), it was possible to clearly rank every case with the proposed index while it was difficult to do with the gamma evaluation method. Conclusion: IMRT plan quality can be evaluated quantitatively by the proposed index. It is considered that the proposed index would provide useful information for better judging the level of goodness of each plan and its Result is independent of the acceptance criteria. This work was supported by the Radiation Technology R&D program (No. 2013M2A2A7043498) and the Mid-career Researcher Program (2014R1A2A1A10050270) through the National Research Foundation of Korea funded by the Ministry of Science, ICT&Future Planning.« less

Experimental analysis and application of the effect of stress on continental shale reservoir brittleness

NASA Astrophysics Data System (ADS)

Yin, Shuai; Lv, Dawei; Jin, Lin; Ding, Wenlong

2018-04-01

Hydraulic fracturing is an effective measure of reservoir modification for the development of shale gas. The evaluation of rock brittleness can provide a basis for the optimization of fracturing. In this paper, the effect of stress on the brittleness of shale is systematically analyzed by designing triaxial mechanics tests. The strain analysis method was used to evaluate the shale brittleness. The research indicates that, with the increase of effective confining pressure, the value of the brittleness index (B 1) decreases. There is a linear and positive correlation between the average reduction ratio of B 1 and the buried depth. The stress has a significant effect on the shale brittleness. Therefore, the rock brittleness can be overestimated without considering the influence of the buried depth or the stress of formation when using the mineral composition method. Being affected by the stress, when the brittle mineral content of the shale reservoir is 70%, 65%, 60%, and 55%, the lower limit depth of the shale gas development is 5000 m, 4400 m, 3000 m, and 1800 m, respectively. However, when the brittle mineral content of the shale is less than 50%, the brittleness index is less than 50% in all of the buried depths. In this case, the shale will not have any commercial development potential. The logging interpretation results of the brittleness index conducted with stress correction are more consistent with the real situation, and thus, this method can be better used to help the optimization of the fracturing intervals of shale gas.

Evaluation of material dispersion using a nanosecond optical pulse radiator.

PubMed

Horiguchi, M; Ohmori, Y; Miya, T

1979-07-01

To study the material dispersion effects on graded-index fibers, a method for measuring the material dispersion in optical glass fibers has been developed. Nanosecond pulses in the 0.5-1.7-microm region are generated by a nanosecond optical pulse radiator and grating monochromator. These pulses are injected into a GeO(2)-P(2)0(5)-doped silica graded-index fiber. Relative time delay changes between different wavelengths are used to determine material dispersion, core glass refractive index, material group index, and optimum profile parameter of the graded-index fiber. From the measured data, the optimum profile parameter on the GeO(2)-P(2)O(5)-doped silica graded-index fiber could be estimated to be 1.88 at 1.27 microm of the material dispersion free wavelength region and 1.82 at 1.55 microm of the lowest-loss wavelength region in silica-based optical fiber waveguides.

Multi-energy Coordinated Evaluation for Energy Internet

NASA Astrophysics Data System (ADS)

Jia, Dongqiang; Sun, Jian; Wang, Cunping; Hong, Xiao; Ma, Xiufan; Xiong, Wenting; Shen, Yaqi

2017-05-01

This paper reviews the current research status of multi-energy coordinated evaluation for energy Internet. Taking the coordinated optimization effect of wind energy, solar energy and other energy sources into consideration, 17 evaluation indexes, such as the substitution coefficient of cold heat and power, the ratio of wind and solar energy, and the rate of energy storage ratio, were designed from five aspects, including the acceptance of renewable energy, energy complementary alternative benefits, peak valley difference, the degree of equipment utilization and user needs. At the same time, this article attaches importance to the economic and social benefits of the coordination of multiple energy sources. Ultimately, a comprehensive multi-energy coordination evaluation index system of regional energy Internet was put forward from the safe operation, coordination and optimization, economic and social benefits four aspects, and a comprehensive evaluation model was established. This model uses the optimal combination weighting method based on moment estimation and Topsis evaluation analysis method, so both the subjective and objective weight of the index are considered and the coordinate evaluation of multi-energy is realized. Finally the perfection of the index system and the validity of the evaluation method are verified by a case analysis.

Air Pollution Translations: A Bibliography with Abstracts - Volume 4.

ERIC Educational Resources Information Center

Environmental Protection Agency, Research Triangle Park, NC. Air Pollution Technical Information Center.

This volume is the fourth in a series of compilations presenting abstracts and indexes of translations of technical air pollution literature. The entries are grouped into 12 subject categories: Emission Sources, Control Methods, Measurement Methods, Air Quality Measurements, Atmospheric Interaction, Basic Science and Technology, Effects--Human…

Technique for forming ITO films with a controlled refractive index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markov, L. K., E-mail: l.markov@mail.ioffe.ru; Smirnova, I. P.; Pavluchenko, A. S.

2016-07-15

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method.more » Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.« less

Numerical model of the polymer electro-optic waveguide

NASA Astrophysics Data System (ADS)

Fan, Guofang; Li, Yuan; Han, Bing; Wang, Qi; Liu, Xinhou; Zhen, Zhen

2012-09-01

A numerical design model is presented for the polymer waveguide in an electro-optic modulator. The effective index method is used to analyze the height of the core waveguide and rib waveguide, an improved Marcatili method is presented to design the rib waveguide width in order to keep the strong single mode operation and have a good match with the standard fiber. Also, the thickness of the upper cladding layer is discussed through calculating the effective index of the multilayer planar waveguide structure has been obtained by setting the optical loss due to the metallic absorption to an acceptable value (<0.1 dB/cm). As a consequence, we take the EO polymer waveguide structure of UV15:CLD/APC:UFC170 as an example, an optimized design is reported.

Remote sensing of environmental particulate pollutants - Optical methods for determinations of size distribution and complex refractive index

NASA Technical Reports Server (NTRS)

Fymat, A. L.

1978-01-01

A unifying approach, based on a generalization of Pearson's differential equation of statistical theory, is proposed for both the representation of particulate size distribution and the interpretation of radiometric measurements in terms of this parameter. A single-parameter gamma-type distribution is introduced, and it is shown that inversion can only provide the dimensionless parameter, r/ab (where r = particle radius, a = effective radius, b = effective variance), at least when the distribution vanishes at both ends. The basic inversion problem in reconstructing the particle size distribution is analyzed, and the existing methods are reviewed (with emphasis on their capabilities) and classified. A two-step strategy is proposed for simultaneously determining the complex refractive index and reconstructing the size distribution of atmospheric particulates.

Trading efficiency for effectiveness in similarity-based indexing for image databases

NASA Astrophysics Data System (ADS)

Barros, Julio E.; French, James C.; Martin, Worthy N.; Kelly, Patrick M.

1995-11-01

Image databases typically manage feature data that can be viewed as points in a feature space. Some features, however, can be better expressed as a collection of points or described by a probability distribution function (PDF) rather than as a single point. In earlier work we introduced a similarity measure and a method for indexing and searching the PDF descriptions of these items that guarantees an answer equivalent to sequential search. Unfortunately, certain properties of the data can restrict the efficiency of that method. In this paper we extend that work and examine trade-offs between efficiency and answer quality or effectiveness. These trade-offs reduce the amount of work required during a search by reducing the number of undesired items fetched without excluding an excessive number of the desired ones.

Evaluation of comprehensive environmental effect about coastal zone development activities in Liaoning Province and management advice.

PubMed

Wang, Wei-Wei; Cai, Yue-Yin; Sun, Yong-Guang; Ma, Hong-Wei

2015-07-01

Using spatial analysis function of Arcgis software, the present study investigated the building environment impact evaluation index system of coastal development in Liaoning Province. The factors of it included of current state of environmental quality, environmental impact of marine development and marine environmental disaster. Weighted factor analysis and comprehensive index method were utilized. At the end, comprehensive environment effect of coastal development in Liaoning Province were evaluated successfully. The result showed that the environmental effect of development activity were most serious, along the Zhao Jiatun coast in north of Zhimao bay and coast of Mianhua island in Dalian bay.

Method and apparatus for determining peak temperature along an optical fiber

DOEpatents

Fox, R.J.

1982-07-29

The invention relates to a new method and new apparatus for determining the hottest temperature or the coldest temperature prevailing along the length of an optical-fiber light guide. The invention is conducted with an optical fiber capable of supporting multidiode propagation of light and comprising a core, a cladding, and a jacket. The core is selected to have (1) a higher refractive index than the core and the cladding and (2) a relatively high negative temperature coefficient of refractive index. A light beam capable of establishing substantially single-mode propagation in the core is launched into an end thereof at an angle to the axis. The angle is increased to effect the onset of light fraction from the core into the cladding. The value of the launch angle corresponding to the onset is determined and then used to establish the refractive index of the core corresponding to the onset angle. The maximum temperature prevailing along the fiber then is determined from the (1) refractive index so determined and (2) the temperature coefficient of refractive index for the core. The invention is based on the finding that the launch angle corresponding to the onset of refraction into the cladding is uniquely determined by the maximum value of the ratio of the core refractive index to the cladding refractive index, which maximum occurs at the hottest point along the fiber.

Method and apparatus for determining peak temperature along an optical fiber

DOEpatents

Fox, Richard J.

1985-01-01

The invention relates to a new method and new apparatus for determining the hottest temperature or the coldest temperature prevailing along the length of an optical-fiber light guide. The invention is conducted with an optical fiber capable of supporting multidiode propagation of light and comprising a core, a cladding, and a jacket. The core is selected to have (1) a higher refractive index than the core and the cladding and (2) a relatively high negative temperature coefficient of refractive index. A light beam capable of establishing substantially single-mode propagation in the core is launched into an end thereof at an angle to the axis. The angle is increased to effect the onset of light refraction from the core into the cladding. The value of the launch angle corresponding to the onset is determined and then used to establish the refractive index of the core corresponding to the onset angle. The maximum temperature prevailing along the fiber then is determined from the (1) refractive index so determined and (2) the temperature coefficient of refractive index for the core. The invention is based on the finding that the launch angle corresponding to the onset of refraction into the cladding is uniquely determined by the maximum value of the ratio of the core refractive index to the cladding refractive index, which maximum occurs at the hottest point along the fiber.

Case study of small scale polytropic index in the central plasma sheet

NASA Astrophysics Data System (ADS)

Peng, XueXia; Cao, JinBin; Liu, WenLen; Ma, YuDuan; Lu, HaiYu; Yang, JunYing; Liu, LiuYuan; Liu, Xu; Wang, Jing; Wang, TieYan; Yu, Jiang

2015-11-01

This paper studies the effective polytropic index in the central plasma sheet (CPS) by using the method of Kartalev et al. (2006), which adopts the denoising technique of Haar wavelet to identify the homogeneous MHD Bernoulli integral (MBI) and has been frequently used to study the polytropic relation in the solar wind. We chose the quiet CPS crossing by Cluster C1 during the interval 08:51:00-09:19:00 UT on 03 August 2001. In the central plasma sheet, thermal pressure energy per unit mass is the most important part in MBI, and kinetic energy of fluid motion and electromagnetic energy per unit mass are less important. In the MBI, there are many peaks, which correspond to isothermal or near isothermal processes. The interval lengths of homogenous MBI regions are generally less than 1 min. The polytropic indexes are calculated by linearly fitting the data of lnp and lnn within a 16 s window, which is shifted forward by 8 s step length. Those polytropic indexes with |R|≥ 0.8 (R is the correlation coefficient between lnp and lnn) and p-value≤0.1 in the homogeneous regions are almost all in the range of [0, 1]. The mean and median effective polytropic indexes with high R and low p-value in homogeneous regions are 0.34 and 0.32 respectively, which are much different from the polytropic index obtained by traditional method (αtrad=-0.15). This result indicates that the CPS is not uniform even during quiet time and the blanket applications of polytropic law to plasma sheet may return misleading value of polytropic index. The polytropic indexes in homogeneous regions with a high correlation coefficient basically have good regression significance and are thus credible. These results are very important to understand the energy transport in magnetotail in the MHD frame.

The Aftershock Risk Index - quantification of aftershock impacts during ongoing strong-seismic sequences

NASA Astrophysics Data System (ADS)

Schaefer, Andreas; Daniell, James; Khazai, Bijan; Wenzel, Friedemann

2016-04-01

The occurrence and impact of strong earthquakes often triggers the long-lasting impact of a seismic sequence. Strong earthquakes are generally followed by many aftershocks or even strong subsequently triggered ruptures. The Nepal 2015 earthquake sequence is one of the most recent examples where aftershocks significantly contributed to human and economic losses. In addition, rumours about upcoming mega-earthquakes, false predictions and on-going cycles of aftershocks induced a psychological burden on the society, which caused panic, additional casualties and prevented people from returning to normal life. This study shows the current phase of development of an operationalised aftershock intensity index, which will contribute to the mitigation of aftershock hazard. Hereby, various methods of earthquake forecasting and seismic risk assessments are utilised and an integration of the inherent aftershock intensity is performed. A spatio-temporal analysis of past earthquake clustering provides first-hand data about the nature of aftershock occurrence. Epidemic methods can additionally provide time-dependent variation indices of the cascading effects of aftershock generation. The aftershock hazard is often combined with the potential for significant losses through the vulnerability of structural systems and population. A historical database of aftershock socioeconomic effects from CATDAT has been used in order to calibrate the index based on observed impacts of historical events and their aftershocks. In addition, analytical analysis of cyclic behaviour and fragility functions of various building typologies are explored. The integration of many different probabilistic computation methods will provide a combined index parameter which can then be transformed into an easy-to-read spatio-temporal intensity index. The index provides daily updated information about the probability of the inherent seismic risk of aftershocks by providing a scalable scheme fordifferent aftershock intensities. These intensities define spatial locations and the temporal period when aftershocks are either probable or damaging. Instead of providing a highly scientific probability mesh-up, the aftershock intensity index is an easy-to-communicate system of intensity levels for rescue and relief organizations but also governments and the common people. For this study, the metric is tested retrospectively on the earthquake sequences of Nepal 2015 and Darfield-Christchurch of 2010/2011.

Refractive index measurement for biomaterial samples by total internal reflection.

PubMed

Jin, Y L; Chen, J Y; Xu, L; Wang, P N

2006-10-21

The refractive index of biological tissue is a fundamental parameter in applications of optical diagnosis and laser treatments. In the present work, the refractive indices and thermo-optic coefficients of some basic biomaterials, such as blood plasma, haemoglobin solution and lipid membrane, were studied by the method of total internal reflection at the wavelengths of 532 and 632.8 nm that are the most frequently used laser wavelengths in the biomedical field. The effects of the sample concentration and the temperature on refractive index were measured, and empirical relationships were summarized, accompanied by a theoretical explanation based on molecular polarization theory. The results provide some fundamental data for the refractive indices of these biomaterials under variant conditions, and also demonstrate that the total internal reflection method is a feasible and reliable way to measure the refractive indices of biological samples.

Nonintrusive measurement of the liquid refractive index by using properties of the cuvette wall.

PubMed

Xu, Ming; Ren, Junpeng; Miao, Runcai; Zhang, Zongquan

2016-10-01

We present a method of nonintrusive measurement of the refractive index of a liquid in a glass cuvette, which uses some optical properties of the cuvette wall and the principle of total internal reflection. By coating a transmission-scattering paint layer on the outer surface of the cuvette, we transform an incident laser beam into a transmitted scattered light. When the transmitted scattered light reaches the interface between the container wall and the liquid inside, the light beams satisfying the condition of total internal reflection are reflected to the coating layer, automatically forming a circular dark pattern that is related to the refractive index of the liquid. Based on an analytic relation between the diameter of the circular dark pattern and the refractive index of the liquid, we devised a method of in situ nonintrusive refractive index measurement. We tested the effect of several parameters on the measuring accuracy and found that the optimal thickness of the transmission-scattering layer is in the range of 50-70 μm, and the aperture of the diaphragm should be in the range of 0.7-1.0 mm. We measured the refractive indices of ethanol, Coca Cola, and red wine, and achieved an accuracy of ±3×10^-4  RIU (refractive index unit).

An approach to compute the C factor for universal soil loss equation using EOS-MODIS vegetation index (VI)

NASA Astrophysics Data System (ADS)

Li, Hui; He, Huizhong; Chen, Xiaoling; Zhang, Lihua

2008-12-01

C factor, known as cover and management factor in USLE, is one of the most important factors since it represents the combined effects of plant, soil cover and management on erosion, whereas it also most easily changed variables by men for it itself is time-variant and the uncertainty nature. So it's vital to compute C factor properly in order to model erosion effectively. In this paper we attempt to present a new method for calculating C value using Vegetation Index (VI) derived from multi-temporal MODIS imagery, which can estimate C factor in a more scientific way. Based on the theory that C factor is strongly correlated with VI, the average annual C value is estimated by adding the VI value of three growth phases within a year with different weights. Modified Fournier Index (MFI) is employed to determine the weight of each growth phase for the vegetation growth and agricultural activities are significantly influenced by precipitation. The C values generated by the proposed method were compared with that of other method, and the results showed that the results of our method is highly correlated with the others. This study is helpful to extract C value from satellite data in a scientific and efficient way, which in turn could be used to facilitate the prediction of erosion.

Stochastic resonance in underdamped periodic potential systems with alpha stable Lévy noise

NASA Astrophysics Data System (ADS)

Liu, Ruo-Nan; Kang, Yan-Mei

2018-06-01

In this paper, we investigate the effect of alpha stable Lévy noise with alpha stability index α (0 < α ≤ 2) on stochastic resonance (SR) in underdamped periodic potential systems by the non-perturbative expansion moment method and stochastic simulation. Using the spectral amplification factor as a quantifying index, we find that SR can occur in both sinusoidal potentials and ratchet potentials when α is close to 2, while the resonant effect becomes weaker as the stability index decreases. By means of massive numerical statistics, we ascribe this trend to the typical jumps of non-Gaussian Lévy noise (0 < α < 2), which play a destructive role on the periodicity of the long time mean response. We also disclose that the skewness parameter of Lévy noise has a more notable impact on the resonant effect of the asymmetric ratchet potential than that of the symmetric sinusoidal potential because of symmetry breaking.

Incidences from modifications of the computational methods of the psophic index

NASA Technical Reports Server (NTRS)

Francois, J.

1981-01-01

In France, the level of annoyance in areas around airports is represented by the psyphic index N. Various modifications were proposed in the method of calculating this indexing order to improve the index as an annoyance indicator. The quality of the modified N index as a prognosis index for annoyance caused by aircraft noise is included.

A non-reference evaluation method for edge detection of wear particles in ferrograph images

NASA Astrophysics Data System (ADS)

Wang, Jingqiu; Bi, Ju; Wang, Lianjun; Wang, Xiaolei

2018-02-01

Edges are one of the most important features of wear particles in a ferrograph image and are widely used to extract parameters, recognize types of wear particles, and assist in the identification of the wear mode and severity. Edge detection is a critical step in ferrograph image processing and analysis. Till date, there has been no single algorithm that guarantees the production of good quality edges in ferrograph images for a variety of applications. Therefore, it is desirable to have a reliable evaluation method for measuring the performance of various edge detection algorithms and for aiding in the selection of the optimal parameter and algorithm for ferrographic applications. In this paper, a new non-reference method for the objective evaluation of wear particle edge detection is proposed. In this method, a comprehensive index of edge evaluation is composed of three components, i.e., the reconstruction based similarity sub-index between the original image and the reconstructed image, the confidence degree sub-index used to show the true or false degree of the edge pixels, and the edge form sub-index that is used to determine the direction consistency and width uniformity of the edges. Two experiments are performed to illustrate the validity of the proposed method. First, this method is used to select the best parameters for an edge detection algorithm, and it is then used to compare the results obtained using various edge detection algorithms and determine the best algorithm. Experimental results of various real ferrograph images verify the effectiveness of the proposed method.

Association between fat mass index and fat-free mass index values and cardiovascular risk in adolescents

PubMed Central

de Oliveira, Patrícia Morais; da Silva, Fabiana Almeida; Oliveira, Renata Maria Souza; Mendes, Larissa Loures; Pereira, Michele; Cândido, Ana Paula Carlos

2016-01-01

Abstract Objective: To describe the association between fat mass index and fat-free mass index values and factors associated with cardiovascular risk in adolescents in the city of Juiz de Fora, Minas Gerais. Methods: Cross-sectional study was with 403 adolescents aged 10–14 years, from public and private schools. Anthropometric, clinical, and biochemical measurements were obtained, as well as self-reported time spent performing physical exercises, sedentary activities and sexual maturation stage. Results: Regarding the nutritional status, 66.5% of the adolescents had normal weight, 19.9% were overweight and 10.2% were obese. For both genders, the fat mass index was higher in adolescents who had high serum triglycerides, body mass index and waist circumference. Conclusions: Adolescents who had anthropometric, clinical and biochemical characteristics considered to be at risk for the development of cardiovascular disease had higher values of fat mass index. Different methodologies for the assessment of body composition make health promotion and disease prevention more effective. PMID:26542380

Correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise.

PubMed

Yoon, Jung-Gyu

2018-01-01

[Purpose] The purpose of this study was to examine correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise. [Subjects and Methods] The subjects of this study were 24 healthy men. C90 area, C90 angle, trace length, sway average velocity for body sway index were measured using a force plate by BT4. The collected data were analyzed using Kendall's coefficient of concordance. [Results] All of body sway index on measuring follow up 24 hours after removing tape were significantly decreased than before and right after plyometric exercise. No significant correlations were found between body sway index and different expansibility of the elastic tape. [Conclusion] It appears that different expansibility of the elastic tape does not affect the ability to body sway index. Carry over effect of taping was verified on measuring follow up 24 hours after removing tape through the decreasing body sway index.

Index finger motor imagery EEG pattern recognition in BCI applications using dictionary cleaned sparse representation-based classification for healthy people

NASA Astrophysics Data System (ADS)

Miao, Minmin; Zeng, Hong; Wang, Aimin; Zhao, Fengkui; Liu, Feixiang

2017-09-01

Electroencephalogram (EEG)-based motor imagery (MI) brain-computer interface (BCI) has shown its effectiveness for the control of rehabilitation devices designed for large body parts of the patients with neurologic impairments. In order to validate the feasibility of using EEG to decode the MI of a single index finger and constructing a BCI-enhanced finger rehabilitation system, we collected EEG data during right hand index finger MI and rest state for five healthy subjects and proposed a pattern recognition approach for classifying these two mental states. First, Fisher's linear discriminant criteria and power spectral density analysis were used to analyze the event-related desynchronization patterns. Second, both band power and approximate entropy were extracted as features. Third, aiming to eliminate the abnormal samples in the dictionary and improve the classification performance of the conventional sparse representation-based classification (SRC) method, we proposed a novel dictionary cleaned sparse representation-based classification (DCSRC) method for final classification. The experimental results show that the proposed DCSRC method gives better classification accuracies than SRC and an average classification accuracy of 81.32% is obtained for five subjects. Thus, it is demonstrated that single right hand index finger MI can be decoded from the sensorimotor rhythms, and the feature patterns of index finger MI and rest state can be well recognized for robotic exoskeleton initiation.

Retrieval of memories with the help of music in Alzheimer's disease.

PubMed

Chevreau, Priscilia; Nizard, Ingrid; Allain, Philippe

2017-09-01

This study focuses on music as a mediator facilitating access to autobiographical memory in Alzheimer's disease (AD). Studies on this topic are rare, but available data have shown a beneficial effect of music on autobiographical performance in AD patients. Based on the "index word" method, we developed the "index music" method for the evaluation of autobiographical memory. The subjects had to tell a memory of their choice from the words or music presented to them. The task was proposed to 54 patients with diagnosis of AD according to DSM IV and NINCDS-ADRDA criteria. All of them had a significant cognitive decline on the MMSE (mean score: 14.5). Patients were matched by age, sex and level of education with 48 control subjects without cognitive impairment (mean score on the MMSE: 28). Results showed that autobiographical memory quantity scores of AD patients were significantly lower than those of healthy control in both methods. However, autobiographical memory quality scores of AD patients increased with "index music" whereas autobiographical memory quality scores of healthy control decreased. Also, the autobiographical performance of patients with AD in condition index music was not correlated with cognitive performance in contrast to the autobiographical performances in index word. These results confirm that music improves access to personal memories in patients with AD. Personal memories could be preserved in patients with AD and music could constitute an interesting way to stimulate recollection.

VLF/LF Amplitude Perturbations before Tuscany Earthquakes, 2013

NASA Astrophysics Data System (ADS)

Khadka, Balaram; Kandel, Keshav Prasad; Pant, Sudikshya; Bhatta, Karan; Ghimire, Basu Dev

2017-12-01

The US Navy VLF/LF Transmitter's NSY signal (45.9 kHz) transmitted from Niscemi, Sicily, Italy, and received at the Kiel Long Wave Monitor, Germany, was analyzed for the period of two months, May and June (EQ-month) of 2013. There were 12 earthquakes of magnitude greater than 4 that hit Italy in these two months, of which the earthquake of 21st June having magnitude of 5.2 and a shallow focal depth of 5 km was the major one. We studied the earthquake of 21st of June 2013, which struck Tuscany, Central Italy, (44.1713°N and 10.2082°E) at 10:33 UT, and also analyzed the effects of this earthquake on the sub-ionos- pheric VLF/LF signals. In addition, we also studied another earthquake, of magnitude 4.9, which hit the same place at 14:40 UT on 30th of June and had shallow focal depth of 10 km. We assessed the data using terminator time (TT) method and night time fluctuation method and found unusual changes in VLF/LF amplitudes/phases. Analysis of trend, night time dispers! ion, and night time fluctuation was also carried and several anomalies were detected. Most ionospheric perturbations in these parameters were found in the month of June, from few days to few weeks prior to the earthquakes. Moreover, we filtered the possible effects due to geomagnetic storms, auroras, and solar activities using parameters like Dst index, AE index, and Kp index for analyzing the geomagnetic effects, and Bz (sigma) index, sunspot numbers, and solar index F10.7 for analyzing the solar activities for the confirmation of anomalies as precursors.

k-neighborhood Decentralization: A Comprehensive Solution to Index the UMLS for Large Scale Knowledge Discovery

PubMed Central

Xiang, Yang; Lu, Kewei; James, Stephen L.; Borlawsky, Tara B.; Huang, Kun; Payne, Philip R.O.

2011-01-01

The Unified Medical Language System (UMLS) is the largest thesaurus in the biomedical informatics domain. Previous works have shown that knowledge constructs comprised of transitively-associated UMLS concepts are effective for discovering potentially novel biomedical hypotheses. However, the extremely large size of the UMLS becomes a major challenge for these applications. To address this problem, we designed a k-neighborhood Decentralization Labeling Scheme (kDLS) for the UMLS, and the corresponding method to effectively evaluate the kDLS indexing results. kDLS provides a comprehensive solution for indexing the UMLS for very efficient large scale knowledge discovery. We demonstrated that it is highly effective to use kDLS paths to prioritize disease-gene relations across the whole genome, with extremely high fold-enrichment values. To our knowledge, this is the first indexing scheme capable of supporting efficient large scale knowledge discovery on the UMLS as a whole. Our expectation is that kDLS will become a vital engine for retrieving information and generating hypotheses from the UMLS for future medical informatics applications. PMID:22154838

k-Neighborhood decentralization: a comprehensive solution to index the UMLS for large scale knowledge discovery.

PubMed

Xiang, Yang; Lu, Kewei; James, Stephen L; Borlawsky, Tara B; Huang, Kun; Payne, Philip R O

2012-04-01

The Unified Medical Language System (UMLS) is the largest thesaurus in the biomedical informatics domain. Previous works have shown that knowledge constructs comprised of transitively-associated UMLS concepts are effective for discovering potentially novel biomedical hypotheses. However, the extremely large size of the UMLS becomes a major challenge for these applications. To address this problem, we designed a k-neighborhood Decentralization Labeling Scheme (kDLS) for the UMLS, and the corresponding method to effectively evaluate the kDLS indexing results. kDLS provides a comprehensive solution for indexing the UMLS for very efficient large scale knowledge discovery. We demonstrated that it is highly effective to use kDLS paths to prioritize disease-gene relations across the whole genome, with extremely high fold-enrichment values. To our knowledge, this is the first indexing scheme capable of supporting efficient large scale knowledge discovery on the UMLS as a whole. Our expectation is that kDLS will become a vital engine for retrieving information and generating hypotheses from the UMLS for future medical informatics applications. Copyright © 2011 Elsevier Inc. All rights reserved.

Experimental and numerical study of underwater beam propagation in a Rayleigh-Bénard turbulence tank.

PubMed

Nootz, Gero; Matt, Silvia; Kanaev, Andrey; Judd, Kyle P; Hou, Weilin

2017-08-01

The propagation of a laser beam through Rayleigh-Bénard (RB) turbulence is investigated experimentally and by way of numerical simulation. For the experimental part, a focused laser beam transversed a 5  m×0.5  m×0.5  m water filled tank lengthwise. The tank is heated from the bottom and cooled from the top to produce convective RB turbulence. The effect of the turbulence on the beam is recorded on the exit of the beam from the tank. From the centroid motion of the beam, the index of refraction structure constant Cn2 is determined. For the numerical efforts RB turbulence is simulated for a tank of the same geometry. The simulated temperature fields are converted to the index of refraction distributions, and Cn2 is extracted from the index of refraction structure functions, as well as from the simulated beam wander. To model the effect on beam propagation, the simulated index of refraction fields are converted to discrete index of refraction phase screens. These phase screens are then used in a split-step beam propagation method to investigate the effect of the turbulence on a laser beam. The beam wander as well as the index of refraction structure parameter Cn2 determined from the experiment and simulation are compared and found to be in good agreement.

Meta-Storms: efficient search for similar microbial communities based on a novel indexing scheme and similarity score for metagenomic data.

PubMed

Su, Xiaoquan; Xu, Jian; Ning, Kang

2012-10-01

It has long been intriguing scientists to effectively compare different microbial communities (also referred as 'metagenomic samples' here) in a large scale: given a set of unknown samples, find similar metagenomic samples from a large repository and examine how similar these samples are. With the current metagenomic samples accumulated, it is possible to build a database of metagenomic samples of interests. Any metagenomic samples could then be searched against this database to find the most similar metagenomic sample(s). However, on one hand, current databases with a large number of metagenomic samples mostly serve as data repositories that offer few functionalities for analysis; and on the other hand, methods to measure the similarity of metagenomic data work well only for small set of samples by pairwise comparison. It is not yet clear, how to efficiently search for metagenomic samples against a large metagenomic database. In this study, we have proposed a novel method, Meta-Storms, that could systematically and efficiently organize and search metagenomic data. It includes the following components: (i) creating a database of metagenomic samples based on their taxonomical annotations, (ii) efficient indexing of samples in the database based on a hierarchical taxonomy indexing strategy, (iii) searching for a metagenomic sample against the database by a fast scoring function based on quantitative phylogeny and (iv) managing database by index export, index import, data insertion, data deletion and database merging. We have collected more than 1300 metagenomic data from the public domain and in-house facilities, and tested the Meta-Storms method on these datasets. Our experimental results show that Meta-Storms is capable of database creation and effective searching for a large number of metagenomic samples, and it could achieve similar accuracies compared with the current popular significance testing-based methods. Meta-Storms method would serve as a suitable database management and search system to quickly identify similar metagenomic samples from a large pool of samples. ningkang@qibebt.ac.cn Supplementary data are available at Bioinformatics online.

Effect of change in core width and core refractive index on the switching behavior of a nonlinear Mach-Zehnder interferometer

NASA Astrophysics Data System (ADS)

Srivastava, Arpita; Medhekar, Sarang

2012-09-01

The effect of variation of core width and core refractive index on output versus input (O-I) and transmission coefficient versus input (T-I) characteristics of a nonlinear Mach-Zehnder interferometer (NMZI) were investigated for the first time. Beam propagation method has been used for the present investigation. Change of core width and/or core refractive index adds extra liberty for changing the operating power of an NMZI to a desired value. Moreover, it is revealed for the first time that use of only the O-I or T-I characteristic presents an incomplete picture of NMZI switching; both O-I and T-I characteristics of both balanced/imbalanced NMZIs are indispensible for complete understanding of NMZI switching.

Using knowledge for indexing health web resources in a quality-controlled gateway.

PubMed

Joubert, Michel; Darmoni, Stefan J; Avillach, Paul; Dahamna, Badisse; Fieschi, Marius

2008-01-01

The aim of this study is to provide to indexers MeSH terms to be considered as major ones in a list of terms automatically extracted from a document. We propose a method combining symbolic knowledge - the UMLS Metathesaurus and Semantic Network - and statistical knowledge drawn from co-occurrences of terms in the CISMeF database (a French-language quality-controlled health gateway) using data mining measures. The method was tested on CISMeF corpus of 293 resources. There was a proportion of 0.37+/-0.26 major terms in the processed records. The method produced lists of terms with a proportion of terms initially pointed out as major of 0.54+/-0.31. The method we propose reduces the number of terms, which seem not useful for content description of resources, such as "check tags", but retains the most descriptive ones. Discarding these terms is accounted for by: 1) the removal by using semantic knowledge of associations of concepts bearing no real medical significance, 2) the removal by using statistical knowledge of nonstatistically significant associations of terms. This method can assist effectively indexers in their daily work and will be soon applied in the CISMeF system.

Assessing Restoration Effects on River Hydromorphology Using the Process-based Morphological Quality Index in Eight European River Reaches

NASA Astrophysics Data System (ADS)

Belletti, B.; Nardi, L.; Rinaldi, M.; Poppe, M.; Brabec, K.; Bussettini, M.; Comiti, F.; Gielczewski, M.; Golfieri, B.; Hellsten, S.; Kail, J.; Marchese, E.; Marcinkowski, P.; Okruszko, T.; Paillex, A.; Schirmer, M.; Stelmaszczyk, M.; Surian, N.

2018-01-01

The Morphological Quality Index (MQI) and the Morphological Quality Index for monitoring (MQIm) have been applied to eight case studies across Europe with the objective of analyzing the hydromorphological response to various restoration measures and of comparing the results of the MQI and MQIm as a morphological assessment applied at the reach scale, with a conventional site scale physical-habitat assessment method. For each restored reach, the two indices were applied to the pre-restoration and post-restoration conditions. The restored reach was also compared to an adjacent, degraded reach. Results show that in all cases the restoration measures improved the morphological quality of the reach, but that the degree of improvement depends on many factors, including the initial morphological conditions, the length of the restored portion in relation to the reach length, and on the type of intervention. The comparison with a conventional site scale physical-habitat assessment method shows that the MQI and MQIm are best suited for the evaluation of restoration effects on river hydromorphology at the geomorphologically-relevant scale of the river reach.

Assessing Restoration Effects on River Hydromorphology Using the Process-based Morphological Quality Index in Eight European River Reaches.

PubMed

Belletti, B; Nardi, L; Rinaldi, M; Poppe, M; Brabec, K; Bussettini, M; Comiti, F; Gielczewski, M; Golfieri, B; Hellsten, S; Kail, J; Marchese, E; Marcinkowski, P; Okruszko, T; Paillex, A; Schirmer, M; Stelmaszczyk, M; Surian, N

2018-01-01

The Morphological Quality Index (MQI) and the Morphological Quality Index for monitoring (MQIm) have been applied to eight case studies across Europe with the objective of analyzing the hydromorphological response to various restoration measures and of comparing the results of the MQI and MQIm as a morphological assessment applied at the reach scale, with a conventional site scale physical-habitat assessment method. For each restored reach, the two indices were applied to the pre-restoration and post-restoration conditions. The restored reach was also compared to an adjacent, degraded reach. Results show that in all cases the restoration measures improved the morphological quality of the reach, but that the degree of improvement depends on many factors, including the initial morphological conditions, the length of the restored portion in relation to the reach length, and on the type of intervention. The comparison with a conventional site scale physical-habitat assessment method shows that the MQI and MQIm are best suited for the evaluation of restoration effects on river hydromorphology at the geomorphologically-relevant scale of the river reach.

Hydration rate of obsidian.

PubMed

Friedman, I; Long, W

1976-01-30

The hydration rates of 12 obsidian samples of different chemical compositions were measured at temperatures from 95 degrees to 245 degrees C. An expression relating hydration rate to temperature was derived for each sample. The SiO(2) content and refractive index are related to the hydration rate, as are the CaO, MgO, and original water contents. With this information it is possible to calculate the hydration rate of a sample from its silica content, refractive index, or chemical index and a knowledge of the effective temperature at which the hydration occurred. The effective hydration temperature can be either measured or approximated from weather records. Rates have been calculated by both methods, and the results show that weather records can give a good approximation to the true EHT, particularly in tropical and subtropical climates. If one determines the EHT by any of the methods suggested, and also measures or knows the rate of hydration of the particular obsidian used, it should be possible to carry out absolute dating to +/- 10 percent of the true age over periods as short as several years and as long as millions of years.

Measuring Multi-Ethnic Desegregation

ERIC Educational Resources Information Center

Straus, Ryane McAuliffe

2010-01-01

This article proposes a new method for measuring school desegregation in multiracial districts, and uses the new method to measure the desegregation effects of magnet schools in Los Angeles. Rather than measuring desegregation between only two groups at a time, I compute the index of interracial exposure for Blacks, Whites, Latinos, and Asians.…

Bin-Hash Indexing: A Parallel Method for Fast Query Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bethel, Edward W; Gosink, Luke J.; Wu, Kesheng

2008-06-27

This paper presents a new parallel indexing data structure for answering queries. The index, called Bin-Hash, offers extremely high levels of concurrency, and is therefore well-suited for the emerging commodity of parallel processors, such as multi-cores, cell processors, and general purpose graphics processing units (GPU). The Bin-Hash approach first bins the base data, and then partitions and separately stores the values in each bin as a perfect spatial hash table. To answer a query, we first determine whether or not a record satisfies the query conditions based on the bin boundaries. For the bins with records that can not bemore » resolved, we examine the spatial hash tables. The procedures for examining the bin numbers and the spatial hash tables offer the maximum possible level of concurrency; all records are able to be evaluated by our procedure independently in parallel. Additionally, our Bin-Hash procedures access much smaller amounts of data than similar parallel methods, such as the projection index. This smaller data footprint is critical for certain parallel processors, like GPUs, where memory resources are limited. To demonstrate the effectiveness of Bin-Hash, we implement it on a GPU using the data-parallel programming language CUDA. The concurrency offered by the Bin-Hash index allows us to fully utilize the GPU's massive parallelism in our work; over 12,000 records can be simultaneously evaluated at any one time. We show that our new query processing method is an order of magnitude faster than current state-of-the-art CPU-based indexing technologies. Additionally, we compare our performance to existing GPU-based projection index strategies.« less

A comparative study of fire weather indices in a semiarid south-eastern Europe region. Case of study: Murcia (Spain).

PubMed

Pérez-Sánchez, Julio; Senent-Aparicio, Javier; Díaz-Palmero, José María; Cabezas-Cerezo, Juan de Dios

2017-07-15

Forest fires are an important distortion in forest ecosystems, linked to their development and whose effects proceed beyond the destruction of ecosystems and material properties, especially in semiarid regions. Prevention of forest fires has to lean on indices based on available parameters that quantify fire risk ignition and spreading. The present study was conducted to compare four fire weather indices in a semiarid region of 11,314km 2 located in southern Spain, characterised as being part of the most damaged area by fire in the Iberian Peninsula. The studied period comprises 3033 wildfires in the region during 15years (2000-2014), of which 80% are >100m 2 and 14% >1000m 2 , resulting around 40km 2 of burnt area in this period. The indices selected have been Angström Index, Forest Fire Drought Index, Forest Moisture Index and Fire Weather Index. Likewise, four selection methods have been applied to compare the results of the studied indices: Mahalanobis distance, percentile method, ranked percentile method and Relative Operating Characteristic curves (ROC). Angström index gives good results in the coastal areas with higher temperatures, low rainfall and wider range of variations while Fire Weather Index has better results in inland areas with higher rainfall, dense forest mass and fewer changes in meteorological conditions throughout the year. ROC space rejects all the indices except Fire Weather Index with good performance all over the region. ROC analysis ratios can be used to assess the success (or lack thereof) of fire indices; thus, it benefits operational wildfire predictions in semiarid regions similar to that of the case study. Copyright © 2017 Elsevier B.V. All rights reserved.

Fine-Grained Indexing of the Biomedical Literature: MeSH Subheading Attachment for a MEDLINE Indexing Tool

PubMed Central

Névéol, Aurélie; Shooshan, Sonya E.; Mork, James G.; Aronson, Alan R.

2007-01-01

Objective This paper reports on the latest results of an Indexing Initiative effort addressing the automatic attachment of subheadings to MeSH main headings recommended by the NLM’s Medical Text Indexer. Material and Methods Several linguistic and statistical approaches are used to retrieve and attach the subheadings. Continuing collaboration with NLM indexers also provided insight on how automatic methods can better enhance indexing practice. Results The methods were evaluated on corpus of 50,000 MEDLINE citations. For main heading/subheading pair recommendations, the best precision is obtained with a post-processing rule method (58%) while the best recall is obtained by pooling all methods (64%). For stand-alone subheading recommendations, the best performance is obtained with the PubMed Related Citations algorithm. Conclusion Significant progress has been made in terms of subheading coverage. After further evaluation, some of this work may be integrated in the MEDLINE indexing workflow. PMID:18693897

The NLM Indexing Initiative.

PubMed Central

Aronson, A. R.; Bodenreider, O.; Chang, H. F.; Humphrey, S. M.; Mork, J. G.; Nelson, S. J.; Rindflesch, T. C.; Wilbur, W. J.

2000-01-01

The objective of NLM's Indexing Initiative (IND) is to investigate methods whereby automated indexing methods partially or completely substitute for current indexing practices. The project will be considered a success if methods can be designed and implemented that result in retrieval performance that is equal to or better than the retrieval performance of systems based principally on humanly assigned index terms. We describe the current state of the project and discuss our plans for the future. PMID:11079836

Effects and Mechanism of SO2 Inhalation on Rat Myocardial Collagen Fibers.

PubMed

Chen, Ping; Qiao, Decai; Liu, Xiaoli

2018-03-21

BACKGROUND This study investigates the effects and mechanism of sulfur dioxide (SO2) inhalation and exercise on rat myocardial collagen fiber. MATERIAL AND METHODS The rats were randomly divided into 4 groups: a control group (RG), an exercise group (EG), an SO2 pollution group (SRG), and an SO2 pollution and exercise group (SEG). Body weight, cardiac index, and left ventricular index in each group were compared. The myocardial hydroxyproline (Hyp) concentration was determined by pepsin acid hydrolysis. The interstitial myocardial collagen expression was measured by Sirius Red F3B in saturated carbazotic acid. The local myocardial angiotensin II type 1 receptor (AT1R) and connective tissue growth factor (CTGF) expression was tested by immunohistochemistry SABC method. RESULTS Compared with RG, the weight growth rate of EG, SRG, and SEG decreased significantly (P<0.01). Compared with EG, the body weight growth rate of SEG significantly decreased (P<0.01) and cardiac index and left ventricular index decreased but without a significant difference. Compared with EG, myocardial Hyp and collagen concentration, myocardial collagen volume fraction (CVF), perivascular collagen area (PVCA), and the expression of AT1R and CTGF in myocardium of SEG increased significantly (P<0.01). CONCLUSIONS SO2 inhalation and exercise will not only offset beneficial health effects of movement on the cardiovascular system, but also produce more unfavorable influences. People should pay attention to their environment when exercising, and try to avoid exercising in environments with SO2 pollution.

Interferometric measurement of refractive index modification in a single mode microfiber

NASA Astrophysics Data System (ADS)

Ahmed, Farid; Ahsani, Vahid; Jun, Martin B. G.

2017-02-01

Efficient and cost effective measurement of the refractive index profile in an optical fiber is a significant technical job to design and manufacture in-fiber photonic devices and communication systems. For instance, to design fiber gratings, it is required to estimate the refractive index modulation to be inscribed by the fabrication apparatus such as ultraviolet or infrared lasers. Mach-Zehnder interferometer (MZI) based quantification of refractive index change written in single mode microfiber by femtosecond laser radiation is presented in this study. The MZI is constructed by splicing a microfiber (core diameter: 3.75 μm, cladding diameter: 40 μm) between standard single mode fibers. To measure the RI inscribed by infrared femtosecond laser, 200 μm length of the core within the MZI was scanned with laser radiation. As the higher index was written within 200 μm length of the core, the transmission spectrum of the interferometer displayed a corresponding red shift. The observed spectral shift was used to calculate the amount of refractive index change inscribed by the femtosecond irradiation. For the MZI length of 3.25 mm, and spectral shift of 0.8 nm, the calculated refractive index was found to be 0.00022. The reported results display excellent agreement between theory and experimental findings. Demonstrated method provides simple yet very effective on-site measurement of index change in optical fibers. Since the MZI can be constructed in diverse fiber types, this technique offers flexibility to quantify index change in various optical fibers.

Methods for accurate estimation of net discharge in a tidal channel

USGS Publications Warehouse

Simpson, M.R.; Bland, R.

2000-01-01

Accurate estimates of net residual discharge in tidally affected rivers and estuaries are possible because of recently developed ultrasonic discharge measurement techniques. Previous discharge estimates using conventional mechanical current meters and methods based on stage/discharge relations or water slope measurements often yielded errors that were as great as or greater than the computed residual discharge. Ultrasonic measurement methods consist of: 1) the use of ultrasonic instruments for the measurement of a representative 'index' velocity used for in situ estimation of mean water velocity and 2) the use of the acoustic Doppler current discharge measurement system to calibrate the index velocity measurement data. Methods used to calibrate (rate) the index velocity to the channel velocity measured using the Acoustic Doppler Current Profiler are the most critical factors affecting the accuracy of net discharge estimation. The index velocity first must be related to mean channel velocity and then used to calculate instantaneous channel discharge. Finally, discharge is low-pass filtered to remove the effects of the tides. An ultrasonic velocity meter discharge-measurement site in a tidally affected region of the Sacramento-San Joaquin Rivers was used to study the accuracy of the index velocity calibration procedure. Calibration data consisting of ultrasonic velocity meter index velocity and concurrent acoustic Doppler discharge measurement data were collected during three time periods. Two sets of data were collected during a spring tide (monthly maximum tidal current) and one of data collected during a neap tide (monthly minimum tidal current). The relative magnitude of instrumental errors, acoustic Doppler discharge measurement errors, and calibration errors were evaluated. Calibration error was found to be the most significant source of error in estimating net discharge. Using a comprehensive calibration method, net discharge estimates developed from the three sets of calibration data differed by less than an average of 4 cubic meters per second, or less than 0.5% of a typical peak tidal discharge rate of 750 cubic meters per second.

The evaluation of basin water resources utilization efficiency based on Chaos projection mode

NASA Astrophysics Data System (ADS)

Guan, X.; Liang, S.; Meng, Y.; Wang, H.

2017-12-01

To promote the coordinated development of a healthy economy, society, and environment, and the sustainable development of water resources comprehensive utilization efficiency (WRCUE), this study investigated appropriate indicators using the trapezoidal fuzzy number method, and constructed an evaluation index system for WRCUE. A WRCUE evaluation model is applied to the areas in the Yellow River Basin in China using a genetic projection pursuit method. The comprehensive evaluation index system of water use efficiency includes 6 indicators: Water consumption per unit industrial value added, water consumption per unit GDP, eliminate the climate effect on agricultural water use efficiency, irrigation water consumption per unit area, domestic water use per capita and industrial water ratio. Then, multiple indexes in the index system are transformed to a comprehensive index by the combined model, which is used to represent the total water resources utilization efficiency. Results show that the WRCUE in Yellow River basin and the provinces have a great distance. WRCUE is well developed in Shanxi, Shandong, and Henan provinces, moderately developed in Shaanxi, Inner Mongolia, and Sichuan provinces, and poorly developed in the Ningxia Autonomous Region, Gansu Province, and Qinghai Province. According to the capacities of provinces, related measures are proposed.

Transpiration rates of urban trees, Aesculus chinensis.

PubMed

Wang, Hua; Wang, Xiaoke; Zhao, Ping; Zheng, Hua; Ren, Yufen; Gao, Fuyuan; Ouyang, Zhiyun

2012-01-01

Transpiration patterns of Aesculus chinensis in relation to explanatory variables in the microclimatic, air quality, and biological phenomena categories were measured in Beijing, China using the thermal dissipation method. The highest transpiration rate measured as the sap flux density of the trees took place from 10:00 am to 13:00 pm in the summer and the lowest was found during nighttime in the winter. To sort out co-linearity, principal component analysis and variation and hierarchical partitioning methods were employed in data analyses. The evaporative demand index (EDI) consisting of air temperature, soil temperature, total radiation, vapor pressure deficit, and atmospheric ozone (O3), explained 68% and 80% of the hourly and daily variations of the tree transpiration, respectively. The independent and joint effects of EDI variables together with a three-variable joint effect exerted the greatest influences on the variance of transpiration rates. The independent effects of leaf area index and atmospheric O3 and their combined effect exhibited minor yet significant influences on tree transpiration rates.

Sorted Index Numbers for Privacy Preserving Face Recognition

NASA Astrophysics Data System (ADS)

Wang, Yongjin; Hatzinakos, Dimitrios

2009-12-01

This paper presents a novel approach for changeable and privacy preserving face recognition. We first introduce a new method of biometric matching using the sorted index numbers (SINs) of feature vectors. Since it is impossible to recover any of the exact values of the original features, the transformation from original features to the SIN vectors is noninvertible. To address the irrevocable nature of biometric signals whilst obtaining stronger privacy protection, a random projection-based method is employed in conjunction with the SIN approach to generate changeable and privacy preserving biometric templates. The effectiveness of the proposed method is demonstrated on a large generic data set, which contains images from several well-known face databases. Extensive experimentation shows that the proposed solution may improve the recognition accuracy.

Evaluation of tablet PC as a tool for teaching tooth brushing to children.

PubMed

Salama, F; Abobakr, I; Al-Khodair, N; Al-Wakeel, M

2016-12-01

This study evaluated the effect of a single time tooth brushing instruction using video on a tablet PC (Apple iPad) compared to operator presentation using jaw model for plaque removal. This cross-sectional study included a convenience sample of 100 children divided into two groups. For Group 1 brushing was demonstrated to the child by the operator with the use of a jaw model. This demonstration was videotaped for subsequent use in Group 2 using a tablet PC (Apple iPad). Plaque index was recorded before and after demonstration of the assigned method of teaching tooth brushing. The results showed a significant difference using the two methods. The difference between the mean plaque index values with the jaw model and tablet PC at baseline and after tooth brushing represented 17.27% (50% improvement) and 11.56% (34% improvement) respectively. Boys showed a 18.3%. higher improvement in tooth brushing compared to girls. Seventy-five percent of the children reported using tablet computers in their daily life. CONCLUSION Teaching children by using a jaw model was more effective in improving plaque index score than using video on tablet PC by 16%. Both methods of tooth brushing teaching were fully accepted by all children.

Goos-Hänchen effect in semiconductor metamaterial waveguide and its application as a biosensor

NASA Astrophysics Data System (ADS)

Tang, Tingting; Li, Chaoyang; Luo, Li; Zhang, Yanfen; Li, Jie

2016-06-01

We investigate Goos-Hänchen (GH) effect in a prism waveguide coupling structure with semiconductor metamaterial (SMM) of ZnGaO/ZnO multilayer and explore the possibility as a biosensor. The GH effect in three different waveguides and their performances as a refractive index sensor to detect glycerol concentration in water are analyzed. The SMM brings a periodic property of GH shift peaks which is not found in other waveguides. It is also verified that setting coupling layer of the prism waveguide coupling structure as sensing area is an effective method to significantly increase the sensitivity to refractive index variation. A schematic diagram for the biosensor configuration is designed, and the sensitivity distribution for different glycerol water index is given. Calculation results show that in the proposed biosensor the maximum sensitivity reaches 3.2 × 106 μm/RIU and resolution reaches 1.6 × 10-7 (around 1.33306) with high sensitive position sensitive detector.

The use of the effect size in JCR Spanish journals of psychology: from theory to fact.

PubMed

García García, Juan; Ortega Campos, Elena; De la Fuente Sánchez, Leticia

2011-11-01

In 1999, Wilkinson and the Task Force on Statistical Inference published "Statistical Methods and Psychology: Guidelines and Explanation." The authors made several recommendations about how to improve the quality of Psychology research papers. One of these was to report some effect-size index in the results of the research. In 2001, the fifth edition of the Publication Manual of the American Psychological Association included this recommendation. In Spain, in 2003, scientific journals like Psicothema or the International Journal of Clinical and Health Psychology (IJCHP) published editorials and papers expressing the need to calculate the effect size in the research papers. The aim of this study is to determine whether the papers published from 2003 to 2008 in the four Spanish journals indexed in the Journal Citation Reports have reported some effect-size index of their results. The findings indicate that, in general, the followup of the norm has been scanty, though the evolution over the analyzed period is different depending on the journal.

Method-independent, Computationally Frugal Convergence Testing for Sensitivity Analysis Techniques

NASA Astrophysics Data System (ADS)

Mai, Juliane; Tolson, Bryan

2017-04-01

The increasing complexity and runtime of environmental models lead to the current situation that the calibration of all model parameters or the estimation of all of their uncertainty is often computationally infeasible. Hence, techniques to determine the sensitivity of model parameters are used to identify most important parameters or model processes. All subsequent model calibrations or uncertainty estimation procedures focus then only on these subsets of parameters and are hence less computational demanding. While the examination of the convergence of calibration and uncertainty methods is state-of-the-art, the convergence of the sensitivity methods is usually not checked. If any, bootstrapping of the sensitivity results is used to determine the reliability of the estimated indexes. Bootstrapping, however, might as well become computationally expensive in case of large model outputs and a high number of bootstraps. We, therefore, present a Model Variable Augmentation (MVA) approach to check the convergence of sensitivity indexes without performing any additional model run. This technique is method- and model-independent. It can be applied either during the sensitivity analysis (SA) or afterwards. The latter case enables the checking of already processed sensitivity indexes. To demonstrate the method independency of the convergence testing method, we applied it to three widely used, global SA methods: the screening method known as Morris method or Elementary Effects (Morris 1991, Campolongo et al., 2000), the variance-based Sobol' method (Solbol' 1993, Saltelli et al. 2010) and a derivative-based method known as Parameter Importance index (Goehler et al. 2013). The new convergence testing method is first scrutinized using 12 analytical benchmark functions (Cuntz & Mai et al. 2015) where the true indexes of aforementioned three methods are known. This proof of principle shows that the method reliably determines the uncertainty of the SA results when different budgets are used for the SA. Subsequently, we focus on the model-independency by testing the frugal method using the hydrologic model mHM (www.ufz.de/mhm) with about 50 model parameters. The results show that the new frugal method is able to test the convergence and therefore the reliability of SA results in an efficient way. The appealing feature of this new technique is the necessity of no further model evaluation and therefore enables checking of already processed (and published) sensitivity results. This is one step towards reliable and transferable, published sensitivity results.

A method based on IHS cylindrical transform model for quality assessment of image fusion

NASA Astrophysics Data System (ADS)

Zhu, Xiaokun; Jia, Yonghong

2005-10-01

Image fusion technique has been widely applied to remote sensing image analysis and processing, and methods for quality assessment of image fusion in remote sensing have also become the research issues at home and abroad. Traditional assessment methods combine calculation of quantitative indexes and visual interpretation to compare fused images quantificationally and qualitatively. However, in the existing assessment methods, there are two defects: on one hand, most imdexes lack the theoretic support to compare different fusion methods. On the hand, there is not a uniform preference for most of the quantitative assessment indexes when they are applied to estimate the fusion effects. That is, the spatial resolution and spectral feature could not be analyzed synchronously by these indexes and there is not a general method to unify the spatial and spectral feature assessment. So in this paper, on the basis of the approximate general model of four traditional fusion methods, including Intensity Hue Saturation(IHS) triangle transform fusion, High Pass Filter(HPF) fusion, Principal Component Analysis(PCA) fusion, Wavelet Transform(WT) fusion, a correlation coefficient assessment method based on IHS cylindrical transform is proposed. By experiments, this method can not only get the evaluation results of spatial and spectral features on the basis of uniform preference, but also can acquire the comparison between fusion image sources and fused images, and acquire differences among fusion methods. Compared with the traditional assessment methods, the new methods is more intuitionistic, and in accord with subjective estimation.

An approach to solve replacement problems under intuitionistic fuzzy nature

NASA Astrophysics Data System (ADS)

Balaganesan, M.; Ganesan, K.

2018-04-01

Due to impreciseness to solve the day to day problems the researchers use fuzzy sets in their discussions of the replacement problems. The aim of this paper is to solve the replacement theory problems with triangular intuitionistic fuzzy numbers. An effective methodology based on fuzziness index and location index is proposed to determine the optimal solution of the replacement problem. A numerical example is illustrated to validate the proposed method.

Effect of rheological parameters on curing rate during NBR injection molding

NASA Astrophysics Data System (ADS)

Kyas, Kamil; Stanek, Michal; Manas, David; Skrobak, Adam

2013-04-01

In this work, non-isothermal injection molding process for NBR rubber mixture considering Isayev-Deng curing kinetic model, generalized Newtonian model with Carreau-WLF viscosity was modeled by using finite element method in order to understand the effect of volume flow rate, index of non-Newtonian behavior and relaxation time on the temperature profile and curing rate. It was found that for specific geometry and processing conditions, increase in relaxation time or in the index of non-Newtonian behavior increases the curing rate due to viscous dissipation taking place at the flow domain walls.

The Comprehensive Evaluation Method of Supervision Risk in Electricity Transaction Based on Unascertained Rational Number

NASA Astrophysics Data System (ADS)

Haining, Wang; Lei, Wang; Qian, Zhang; Zongqiang, Zheng; Hongyu, Zhou; Chuncheng, Gao

2018-03-01

For the uncertain problems in the comprehensive evaluation of supervision risk in electricity transaction, this paper uses the unidentified rational numbers to evaluation the supervision risk, to obtain the possible result and corresponding credibility of evaluation and realize the quantification of risk indexes. The model can draw the risk degree of various indexes, which makes it easier for the electricity transaction supervisors to identify the transaction risk and determine the risk level, assisting the decision-making and realizing the effective supervision of the risk. The results of the case analysis verify the effectiveness of the model.

Circularly polarized guided modes in dielectrically chiral photonic crystal fiber.

PubMed

Li, Junqing; Su, Qiyao; Cao, Yusheng

2010-08-15

The effect of dielectric chirality on the polarization states and mode indices of guided modes in photonic crystal fiber (PCF) is investigated by a modified plane-wave expansion (PWE) method. Using a solid-core chiral PCF as a numerical example, we show that circular polarization is the eigenstate of the fundamental mode. Mode index divergence between right-handed circularly polarized (RCP) and left-handed circularly polarized (LCP) states is demonstrated. Chirality's effect on mode index and circular birefringence (CB) in such a PCF is found to be similar to that in bulk chiral media.

Optimization of the efficiency of search operations in the relational database of radio electronic systems

NASA Astrophysics Data System (ADS)

Wajszczyk, Bronisław; Biernacki, Konrad

2018-04-01

The increase of interoperability of radio electronic systems used in the Armed Forces requires the processing of very large amounts of data. Requirements for the integration of information from many systems and sensors, including radar recognition, electronic and optical recognition, force to look for more efficient methods to support information retrieval in even-larger database resources. This paper presents the results of research on methods of improving the efficiency of databases using various types of indexes. The data structure indexing technique is a solution used in RDBMS systems (relational database management system). However, the analysis of the performance of indices, the description of potential applications, and in particular the presentation of a specific scale of performance growth for individual indices are limited to few studies in this field. This paper contains analysis of methods affecting the work efficiency of a relational database management system. As a result of the research, a significant increase in the efficiency of operations on data was achieved through the strategy of indexing data structures. The presentation of the research topic discussed in this paper mainly consists of testing the operation of various indexes against the background of different queries and data structures. The conclusions from the conducted experiments allow to assess the effectiveness of the solutions proposed and applied in the research. The results of the research indicate the existence of a real increase in the performance of operations on data using indexation of data structures. In addition, the level of this growth is presented, broken down by index types.

Developing a Method to Mask Trees in Commercial Multispectral Imagery

NASA Astrophysics Data System (ADS)

Becker, S. J.; Daughtry, C. S. T.; Jain, D.; Karlekar, S. S.

2015-12-01

The US Army has an increasing focus on using automated remote sensing techniques with commercial multispectral imagery (MSI) to map urban and peri-urban agricultural and vegetative features; however, similar spectral profiles between trees (i.e., forest canopy) and other vegetation result in confusion between these cover classes. Established vegetation indices, like the Normalized Difference Vegetation Index (NDVI), are typically not effective in reliably differentiating between trees and other vegetation. Previous research in tree mapping has included integration of hyperspectral imagery (HSI) and LiDAR for tree detection and species identification, as well as the use of MSI to distinguish tree crowns from non-vegetated features. This project developed a straightforward method to model and also mask out trees from eight-band WorldView-2 (1.85 meter x 1.85 meter resolution at nadir) satellite imagery at the Beltsville Agricultural Research Center in Beltsville, MD spanning 2012 - 2015. The study site included tree cover, a range of agricultural and vegetative cover types, and urban features. The modeling method exploits the product of the red and red edge bands and defines accurate thresholds between trees and other land covers. Results show this method outperforms established vegetation indices including the NDVI, Soil Adjusted Vegetation Index, Normalized Difference Water Index, Simple Ratio, and Normalized Difference Red Edge Index in correctly masking trees while preserving the other information in the imagery. This method is useful when HSI and LiDAR collection are not possible or when using archived MSI.

A topographical map approach to representing treatment efficacy: a focus on positive psychology interventions.

PubMed

Gorlin, Eugenia I; Lee, Josephine; Otto, Michael W

2018-01-01

A recent meta-analysis by Bolier et al. indicated that positive psychology interventions have overall small to moderate effects on well-being, but results were quite heterogeneous across intervention trials. Such meta-analytic research helps condense information on the efficacy of a broad psychosocial intervention by averaging across many effects; however, such global averages may provide limited navigational guidance for selecting among specific interventions. Here, we introduce a novel method for displaying qualitative and quantitative information on the efficacy of interventions using a topographical map approach. As an initial prototype for demonstrating this method, we mapped 50 positive psychology interventions targeting well-being (as captured in the Bolier et al. [2013] meta-analysis, [Bolier, L., Haverman, M., Westerhof, G. J., Riper, H., Smit, F., & Bohlmeijer, E. (2013). Positive psychology interventions: A meta-analysis of randomized controlled studies. BMC Public Health, 13, 83]). Each intervention domain/subdomain was mapped according to its average effect size (indexed by vertical elevation), number of studies providing effect sizes (indexed by horizontal area), and therapist/client burden (indexed by shading). The geographical placement of intervention domains/subdomains was determined by their conceptual proximity, allowing viewers to gauge the general conceptual "direction" in which promising intervention effects can be found. The resulting graphical displays revealed several prominent features of the well-being intervention "landscape," such as more strongly and uniformly positive effects of future-focused interventions (including, goal-pursuit and optimism training) compared to past/present-focused ones.

Nucleic acid indexing

DOEpatents

Guilfoyle, Richard A.; Guo, Zhen

2001-01-01

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

Nucleic acid indexing

DOEpatents

Guilfoyle, Richard A.; Guo, Zhen

1999-01-01

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

On the Use of a Signal Quality Index Applying at Tracking Stage Level to Assist the RAIM System of a GNSS Receiver.

PubMed

Berardo, Mattia; Lo Presti, Letizia

2016-07-02

In this work, a novel signal processing method is proposed to assist the Receiver Autonomous Integrity Monitoring (RAIM) module used in a receiver of Global Navigation Satellite Systems (GNSS) to improve the integrity of the estimated position. The proposed technique represents an evolution of the Multipath Distance Detector (MPDD), thanks to the introduction of a Signal Quality Index (SQI), which is both a metric able to evaluate the goodness of the signal, and a parameter used to improve the performance of the RAIM modules. Simulation results show the effectiveness of the proposed method.

Comparison of the manual, semiautomatic, and automatic selection and leveling of hot spots in whole slide images for Ki-67 quantification in meningiomas.

PubMed

Swiderska, Zaneta; Korzynska, Anna; Markiewicz, Tomasz; Lorent, Malgorzata; Zak, Jakub; Wesolowska, Anna; Roszkowiak, Lukasz; Slodkowska, Janina; Grala, Bartlomiej

2015-01-01

Background. This paper presents the study concerning hot-spot selection in the assessment of whole slide images of tissue sections collected from meningioma patients. The samples were immunohistochemically stained to determine the Ki-67/MIB-1 proliferation index used for prognosis and treatment planning. Objective. The observer performance was examined by comparing results of the proposed method of automatic hot-spot selection in whole slide images, results of traditional scoring under a microscope, and results of a pathologist's manual hot-spot selection. Methods. The results of scoring the Ki-67 index using optical scoring under a microscope, software for Ki-67 index quantification based on hot spots selected by two pathologists (resp., once and three times), and the same software but on hot spots selected by proposed automatic methods were compared using Kendall's tau-b statistics. Results. Results show intra- and interobserver agreement. The agreement between Ki-67 scoring with manual and automatic hot-spot selection is high, while agreement between Ki-67 index scoring results in whole slide images and traditional microscopic examination is lower. Conclusions. The agreement observed for the three scoring methods shows that automation of area selection is an effective tool in supporting physicians and in increasing the reliability of Ki-67 scoring in meningioma.

Methods of both destructive and non-destructive metrology of GRIN optical elements

NASA Astrophysics Data System (ADS)

Lindberg, G. P.; Deegan, J.; Benson, R.; Berger, A. J.; Linden, J. J.; Gibson, D.; Bayya, S.; Sanghera, J.; Nguyen, V.; Kotov, M.

2015-05-01

Gradient index (GRIN) optics have been an up-and-coming tool in the world of optics. By combining an index gradient with a surface curvature the number of optical components for a lens system can often be greatly reduced. Their use in the realm of infra-red is only becoming realized as new efforts are being developed to create materials that are suitable and mutually compatible for these optical components. The materials being pursued are the chalcogenide based glasses. Small changes in elemental concentrations in these glasses can have significant effects on physical and optical properties. The commonality between these glasses and their widely different optical properties make them prime candidates for GRIN applications. Traditional methods of metrology are complicated by the combination of the GRIN and the curvature of the element. We will present preliminary data on both destructive and non-destructive means of measuring the GRIN profile. Non-destructive methods may require inference of index through material properties, by careful measurement of the individual materials going into the GRIN optic, followed by, mapping measurements of the GRIN surface. Methods to be pursued are micro Raman mapping and CT scanning. By knowing the properties of the layers and accurately mapping the interfaces between the layers we should be able to back out the index profile of the GRIN optic and then confirm the profile by destructive means.

Comparison of the Manual, Semiautomatic, and Automatic Selection and Leveling of Hot Spots in Whole Slide Images for Ki-67 Quantification in Meningiomas

PubMed Central

Swiderska, Zaneta; Korzynska, Anna; Markiewicz, Tomasz; Lorent, Malgorzata; Zak, Jakub; Wesolowska, Anna; Roszkowiak, Lukasz; Slodkowska, Janina; Grala, Bartlomiej

2015-01-01

Background. This paper presents the study concerning hot-spot selection in the assessment of whole slide images of tissue sections collected from meningioma patients. The samples were immunohistochemically stained to determine the Ki-67/MIB-1 proliferation index used for prognosis and treatment planning. Objective. The observer performance was examined by comparing results of the proposed method of automatic hot-spot selection in whole slide images, results of traditional scoring under a microscope, and results of a pathologist's manual hot-spot selection. Methods. The results of scoring the Ki-67 index using optical scoring under a microscope, software for Ki-67 index quantification based on hot spots selected by two pathologists (resp., once and three times), and the same software but on hot spots selected by proposed automatic methods were compared using Kendall's tau-b statistics. Results. Results show intra- and interobserver agreement. The agreement between Ki-67 scoring with manual and automatic hot-spot selection is high, while agreement between Ki-67 index scoring results in whole slide images and traditional microscopic examination is lower. Conclusions. The agreement observed for the three scoring methods shows that automation of area selection is an effective tool in supporting physicians and in increasing the reliability of Ki-67 scoring in meningioma. PMID:26240787

Effects of refractive index mismatch in optical CT imaging of polymer gel dosimeters.

PubMed

Manjappa, Rakesh; Makki S, Sharath; Kumar, Rajesh; Kanhirodan, Rajan

2015-02-01

Proposing an image reconstruction technique, algebraic reconstruction technique-refraction correction (ART-rc). The proposed method takes care of refractive index mismatches present in gel dosimeter scanner at the boundary, and also corrects for the interior ray refraction. Polymer gel dosimeters with high dose regions have higher refractive index and optical density compared to the background medium, these changes in refractive index at high dose results in interior ray bending. The inclusion of the effects of refraction is an important step in reconstruction of optical density in gel dosimeters. The proposed ray tracing algorithm models the interior multiple refraction at the inhomogeneities. Jacob's ray tracing algorithm has been modified to calculate the pathlengths of the ray that traverses through the higher dose regions. The algorithm computes the length of the ray in each pixel along its path and is used as the weight matrix. Algebraic reconstruction technique and pixel based reconstruction algorithms are used for solving the reconstruction problem. The proposed method is tested with numerical phantoms for various noise levels. The experimental dosimetric results are also presented. The results show that the proposed scheme ART-rc is able to reconstruct optical density inside the dosimeter better than the results obtained using filtered backprojection and conventional algebraic reconstruction approaches. The quantitative improvement using ART-rc is evaluated using gamma-index. The refraction errors due to regions of different refractive indices are discussed. The effects of modeling of interior refraction in the dose region are presented. The errors propagated due to multiple refraction effects have been modeled and the improvements in reconstruction using proposed model is presented. The refractive index of the dosimeter has a mismatch with the surrounding medium (for dry air or water scanning). The algorithm reconstructs the dose profiles by estimating refractive indices of multiple inhomogeneities having different refractive indices and optical densities embedded in the dosimeter. This is achieved by tracking the path of the ray that traverses through the dosimeter. Extensive simulation studies have been carried out and results are found to be matching that of experimental results.

[The effect of Ai Chi method in fibromyalgic patients].

PubMed

Santana, Jacqueline Soares de; Almeida, Ana Paula Gonçalves de; Brandão, Patrícia Martins Carvalho

2010-06-01

The objective of this article is to show the effect of the Ai Chi method, as an alternative form of hydrotherapeutic approach in fibromyalgia syndrome patients. Ten patients were studied, four were part of the experiment group and five of the control group, with one desistance. The patients were evaluated through the Fibromyalgia Impact Questionnaire (QIF) and Scale of Intensity and Index of pain in Sensible Points. Two evaluations were performed, before and after the treatment. The patients were submitted to ten sessions of the Ai Chi method during 40 minutes. The scale of intensity of pain in sensible points presented an improvement in the intensity of pain after the intervention, while quality of life remained without alteration. Regarding the quality of life, it was observed that the groups had similar results, because of the fact that patients had not presented improvement at depressive state. It was also verified a difference in the index of the sensible points between the groups; the explanation for this difference might be because of the benefits of the immersion in warm water and the effect of the Ai Chi method. There was no significant difference between the groups, which can be attributed to its limitations. In this way, new studies referring to the application of the Ai Chi method in patients carrying fibromyalgia syndrome become relevant.

Direct Electrospray Printing of Gradient Refractive Index Chalcogenide Glass Films.

PubMed

Novak, Spencer; Lin, Pao Tai; Li, Cheng; Lumdee, Chatdanai; Hu, Juejun; Agarwal, Anuradha; Kik, Pieter G; Deng, Weiwei; Richardson, Kathleen

2017-08-16

A spatially varying effective refractive index gradient using chalcogenide glass layers is printed on a silicon wafer using an optimized electrospray (ES) deposition process. Using solution-derived glass precursors, IR-transparent Ge 23 Sb 7 S 70 and As 40 S 60 glass films of programmed thickness are fabricated to yield a bilayer structure, resulting in an effective gradient refractive index (GRIN) film. Optical and compositional analysis tools confirm the optical and physical nature of the gradient in the resulting high-optical-quality films, demonstrating the power of direct printing of multimaterial structures compatible with planar photonic fabrication protocols. The potential application of such tailorable materials and structures as they relate to the enhancement of sensitivity in chalcogenide glass based planar chemical sensor device design is presented. This method, applicable to a broad cross section of glass compositions, shows promise in directly depositing GRIN films with tunable refractive index profiles for bulk and planar optical components and devices.

Mode characteristics of nonplanar double-heterojunction and large-optical-cavity laser structures

NASA Technical Reports Server (NTRS)

Butler, J. K.; Botez, D.

1982-01-01

Mode behavior of nonplanar double-heterojunction (DH) and large-optical-cavity (LOC) lasers is investigated using the effective index method to model the lateral field distribution. The thickness variations of various layers for the devices discussed are correlated with the growth characteristics of liquid-phase epitaxy over topographical features (channels, mesas) etched into the substrate. The effective dielectric profiles of constricted double-heterojunction (CDH)-LOC lasers show a strong influence on transverse mode operation: the fundamental transverse mode (i.e., in the plane perpendicular to the junction) may be laterally index-guided, while the first (high)-order mode is laterally index-antiguided. The analytical model developed uses a smoothly varying hyperbolic cosine distribution to characterize lateral index variations. The waveguide model is applied to several lasers to illustrate conditions necessary to convert leaky modes to trapped ones via the active-region gain distribution. Theoretical radiation patterns are calculated using model parameters, and matched to an experimental far-field pattern.

Effect of anatase nanoparticles (TiO2) on parsley seed germination (Petroselinum crispum) in vitro.

PubMed

Dehkourdi, Elahe Hashemi; Mosavi, Mousa

2013-11-01

Nano priming is a new method for the increase of seedling vigor and improvement of germination percentage and seedling growth. The experiments to evaluate the effect of different concentrations of nano-anatase on germination parameters of parsley as a completely randomized design with five replications were performed in a tissue culture laboratory of the Department of Horticulture, Shahid Chamran University of Ahvaz. In addition, nano-anatase at four concentrations (10, 20, 30, and 40 mg/ml) was added to the Murashige and Skoog medium. At the end of the experiment, the percentage of germination, germination rate index, root and shoot length, fresh weight of seedlings, vigor index, and chlorophyll content were evaluated. The results showed that an increase in the concentration of nano-anatase caused a significant increase in the percentage of germination, germination rate index, root and shoot length, fresh weight, vigor index, and chlorophyll content of seedlings. The best concentration of nano-anatase was 30 mg/ml.

Coexistence of positive and negative refractive index sensitivity in the liquid-core photonic crystal fiber based plasmonic sensor.

PubMed

Shuai, Binbin; Xia, Li; Liu, Deming

2012-11-05

We present and numerically characterize a liquid-core photonic crystal fiber based plasmonic sensor. The coupling properties and sensing performance are investigated by the finite element method. It is found that not only the plasmonic mode dispersion relation but also the fundamental mode dispersion relation is rather sensitive to the analyte refractive index (RI). The positive and negative RI sensitivity coexist in the proposed design. It features a positive RI sensitivity when the increment of the SPP mode effective index is larger than that of the fundamental mode, but the sensor shows a negative RI sensitivity once the increment of the fundamental mode gets larger. A maximum negative RI sensitivity of -5500nm/RIU (Refractive Index Unit) is achieved in the sensing range of 1.50-1.53. The effects of the structural parameters on the plasmonic excitations are also studied, with a view of tuning and optimizing the resonant spectrum.

New methods for indexing multi-lattice diffraction data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gildea, Richard J.; Waterman, David G.; CCP4, Research Complex at Harwell, Rutherford Appleton Laboratory, Didcot OX11 0FA

2014-10-01

A new indexing method is presented which is capable of indexing multiple crystal lattices from narrow wedges of data. The efficacy of this method is demonstrated with both semi-synthetic multi-lattice data and real multi-lattice data recorded from microcrystals of ∼1 µm in size. A new indexing method is presented which is capable of indexing multiple crystal lattices from narrow wedges of diffraction data. The method takes advantage of a simplification of Fourier transform-based methods that is applicable when the unit-cell dimensions are known a priori. The efficacy of this method is demonstrated with both semi-synthetic multi-lattice data and real multi-latticemore » data recorded from crystals of ∼1 µm in size, where it is shown that up to six lattices can be successfully indexed and subsequently integrated from a 1° wedge of data. Analysis is presented which shows that improvements in data-quality indicators can be obtained through accurate identification and rejection of overlapping reflections prior to scaling.« less

Multiscale permutation entropy analysis of EEG recordings during sevoflurane anesthesia

NASA Astrophysics Data System (ADS)

Li, Duan; Li, Xiaoli; Liang, Zhenhu; Voss, Logan J.; Sleigh, Jamie W.

2010-08-01

Electroencephalogram (EEG) monitoring of the effect of anesthetic drugs on the central nervous system has long been used in anesthesia research. Several methods based on nonlinear dynamics, such as permutation entropy (PE), have been proposed to analyze EEG series during anesthesia. However, these measures are still single-scale based and may not completely describe the dynamical characteristics of complex EEG series. In this paper, a novel measure combining multiscale PE information, called CMSPE (composite multi-scale permutation entropy), was proposed for quantifying the anesthetic drug effect on EEG recordings during sevoflurane anesthesia. Three sets of simulated EEG series during awake, light and deep anesthesia were used to select the parameters for the multiscale PE analysis: embedding dimension m, lag τ and scales to be integrated into the CMSPE index. Then, the CMSPE index and raw single-scale PE index were applied to EEG recordings from 18 patients who received sevoflurane anesthesia. Pharmacokinetic/pharmacodynamic (PKPD) modeling was used to relate the measured EEG indices and the anesthetic drug concentration. Prediction probability (Pk) statistics and correlation analysis with the response entropy (RE) index, derived from the spectral entropy (M-entropy module; GE Healthcare, Helsinki, Finland), were investigated to evaluate the effectiveness of the new proposed measure. It was found that raw single-scale PE was blind to subtle transitions between light and deep anesthesia, while the CMSPE index tracked these changes accurately. Around the time of loss of consciousness, CMSPE responded significantly more rapidly than the raw PE, with the absolute slopes of linearly fitted response versus time plots of 0.12 (0.09-0.15) and 0.10 (0.06-0.13), respectively. The prediction probability Pk of 0.86 (0.85-0.88) and 0.85 (0.80-0.86) for CMSPE and raw PE indicated that the CMSPE index correlated well with the underlying anesthetic effect. The correlation coefficient for the comparison between the CMSPE index and RE index of 0.84 (0.80-0.88) was significantly higher than the raw PE index of 0.75 (0.66-0.84). The results show that the CMSPE outperforms the raw single-scale PE in reflecting the sevoflurane drug effect on the central nervous system.

Comparison of simple additive weighting (SAW) and composite performance index (CPI) methods in employee remuneration determination

NASA Astrophysics Data System (ADS)

Karlitasari, L.; Suhartini, D.; Benny

2017-01-01

The process of determining the employee remuneration for PT Sepatu Mas Idaman currently are still using Microsoft Excel-based spreadsheet where in the spreadsheet there is the value of criterias that must be calculated for every employee. This can give the effect of doubt during the assesment process, therefore resulting in the process to take much longer time. The process of employee remuneration determination is conducted by the assesment team based on some criterias that have been predetermined. The criteria used in the assessment process are namely the ability to work, human relations, job responsibility, discipline, creativity, work, achievement of targets, and absence. To ease the determination of employee remuneration to be more efficient and effective, the Simple Additive Weighting (SAW) method is used. SAW method can help in decision making for a certain case, and the calculation that generates the greatest value will be chosen as the best alternative. Other than SAW, also by using another method was the CPI method which is one of the calculating method in decision making based on performance index. Where SAW method was more faster by 89-93% compared to CPI method. Therefore it is expected that this application can be an evaluation material for the need of training and development for employee performances to be more optimal.

Improved retroreflection method for measuring the refractive index of liquids.

PubMed

Shao, Duo; Tian, Linghao; Chen, Jingfei; Chen, Xianfeng

2010-06-01

We propose a new method for measuring the refractive index of liquids with high precision; the method is based on use of the optical fiber end face. As an example, we investigated the refractive index of sugar solution under varying conditions tens of times. The results show that this method has the advantage of higher stability and repeatability. The concentration and the temperature-dependent refractive index of the sugar solution is also experimentally studied.

Physics Notes

ERIC Educational Resources Information Center

School Science Review, 1977

1977-01-01

Includes methods for demonstrating Schlieren effect, measuring refractive index, measuring acceleration, presenting concepts of optics, automatically recording weather, constructing apparaturs for sound experiments, using thermistor thermometers, using the 741 operational amplifier in analog computing, measuring inductance, electronically ringing…

Simultaneous measurement of refractive index and thickness by combining low-coherence interferometry and confocal optics.

PubMed

Kim, Seokhan; Na, Jihoon; Kim, Myoung Jin; Lee, Byeong Ha

2008-04-14

We propose and demonstrate novel methods that enable simultaneous measurements of the phase index, the group index, and the geometrical thickness of an optically transparent object by combining optical low-coherence interferometer and confocal optics. The low-coherence interferometer gives information relating the group index with the thickness, while the confocal optics allows access to the phase index related with the thickness of the sample. To relate these, two novel methods were devised. In the first method, the dispersion-induced broadening of the low-coherence envelop signal was utilized, and in the second method the frequency derivative of the phase index was directly obtained by taking the confocal measurements at several wavelengths. The measurements were made with eight different samples; B270, CaF2, two of BK7, two of fused silica, cover glass, and cigarette cover film. The average measurement errors of the first and the second methods were 0.123% and 0.061% in the geometrical thickness, 0.133% and 0.066% in the phase index, and 0.106% and 0.057% in the group index, respectively.

Effects of random aspects of cutting tool wear on surface roughness and tool life

NASA Astrophysics Data System (ADS)

Nabil, Ben Fredj; Mabrouk, Mohamed

2006-10-01

The effects of random aspects of cutting tool flank wear on surface roughness and on tool lifetime, when turning the AISI 1045 carbon steel, were studied in this investigation. It was found that standard deviations corresponding to tool flank wear and to the surface roughness increase exponentially with cutting time. Under cutting conditions that correspond to finishing operations, no significant differences were found between the calculated values of the capability index C p at the steady-state region of the tool flank wear, using the best-fit method or the Box-Cox transformation, or by making the assumption that the surface roughness data are normally distributed. Hence, a method to establish cutting tool lifetime could be established that simultaneously respects the desired average of surface roughness and the required capability index.

Research of building information extraction and evaluation based on high-resolution remote-sensing imagery

NASA Astrophysics Data System (ADS)

Cao, Qiong; Gu, Lingjia; Ren, Ruizhi; Wang, Lang

2016-09-01

Building extraction currently is important in the application of high-resolution remote sensing imagery. At present, quite a few algorithms are available for detecting building information, however, most of them still have some obvious disadvantages, such as the ignorance of spectral information, the contradiction between extraction rate and extraction accuracy. The purpose of this research is to develop an effective method to detect building information for Chinese GF-1 data. Firstly, the image preprocessing technique is used to normalize the image and image enhancement is used to highlight the useful information in the image. Secondly, multi-spectral information is analyzed. Subsequently, an improved morphological building index (IMBI) based on remote sensing imagery is proposed to get the candidate building objects. Furthermore, in order to refine building objects and further remove false objects, the post-processing (e.g., the shape features, the vegetation index and the water index) is employed. To validate the effectiveness of the proposed algorithm, the omission errors (OE), commission errors (CE), the overall accuracy (OA) and Kappa are used at final. The proposed method can not only effectively use spectral information and other basic features, but also avoid extracting excessive interference details from high-resolution remote sensing images. Compared to the original MBI algorithm, the proposed method reduces the OE by 33.14% .At the same time, the Kappa increase by 16.09%. In experiments, IMBI achieved satisfactory results and outperformed other algorithms in terms of both accuracies and visual inspection

A method for scintillation characterization using geodetic receivers operating at 1 Hz

NASA Astrophysics Data System (ADS)

Juan, J. M.; Aragon-Angel, A.; Sanz, J.; González-Casado, G.; Rovira-Garcia, A.

2017-11-01

Ionospheric scintillation produces strong disruptive effects on global navigation satellite system (GNSS) signals, ranging from degrading performances to rendering these signals useless for accurate navigation. The current paper presents a novel approach to detect scintillation on the GNSS signals based on its effect on the ionospheric-free combination of carrier phases, i.e. the standard combination of measurements used in precise point positioning (PPP). The method is implemented using actual data, thereby having both its feasibility and its usefulness assessed at the same time. The results identify the main effects of scintillation, which consist of an increased level of noise in the ionospheric-free combination of measurements and the introduction of cycle-slips into the signals. Also discussed is how mis-detected cycle-slips contaminate the rate of change of the total electron content index (ROTI) values, which is especially important for low-latitude receivers. By considering the effect of single jumps in the individual frequencies, the proposed method is able to isolate, over the combined signal, the frequency experiencing the cycle-slip. Moreover, because of the use of the ionospheric-free combination, the method captures the diffractive nature of the scintillation phenomena that, in the end, is the relevant effect on PPP. Finally, a new scintillation index is introduced that is associated with the degradation of the performance in navigation.

Weakly modulated silicon-dioxide-cladding gratings for silicon waveguide Fabry-Pérot cavities.

PubMed

Grote, Richard R; Driscoll, Jeffrey B; Biris, Claudiu G; Panoiu, Nicolae C; Osgood, Richard M

2011-12-19

We show by theory and experiment that silicon-dioxide-cladding gratings for Fabry-Pérot cavities on silicon-on-insulator channel ("wire") waveguides provide a low-refractive-index perturbation, which is required for several important integrated photonics components. The underlying refractive index perturbation of these gratings is significantly weaker than that of analogous silicon gratings, leading to finer control of the coupling coefficient κ. Our Fabry-Pérot cavities are designed using the transfer-matrix method (TMM) in conjunction with the finite element method (FEM) for calculating the effective index of each waveguide section. Device parameters such as coupling coefficient, κ, Bragg mirror stop band, Bragg mirror reflectivity, and quality factor Q are examined via TMM modeling. Devices are fabricated with representative values of distributed Bragg reflector lengths, cavity lengths, and propagation losses. The measured transmission spectra show excellent agreement with the FEM/TMM calculations.

Mitigating effect on turbulent scintillation using non-coherent multi-beam overlapped illumination

NASA Astrophysics Data System (ADS)

Zhou, Lu; Tian, Yuzhen; Wang, Rui; Wang, Tingfeng; Sun, Tao; Wang, Canjin; Yang, Xiaotian

2017-12-01

In order to find an effective method to mitigate the turbulent scintillation for applications involved laser propagation through atmosphere, we demonstrated one model using non-coherent multi-beam overlapped illumination. Based on lognormal distribution and the statistical moments of overlapped field, the reduction effect on turbulent scintillation of this method was discussed and tested against numerical wave optics simulation and laboratory experiments with phase plates. Our analysis showed that the best mitigating effect, the scintillation index of overlapped field reduced to 1/N of that when using single beam illuminating, could be obtained using this method when the intensity of N emitting beams equaled to each other.

Comparing and refining karst disturbance index methods through application in an island karst setting

NASA Astrophysics Data System (ADS)

Porter, Brandon L.; North, Leslie A.; Polk, Jason S.

2016-12-01

The interconnected nature of surface and subsurface karst environments allows easy disturbance to their aquifers and specialized ecosystems from anthropogenic impacts. The karst disturbance index is a holistic tool used to measure disturbance to karst environments and has been applied and refined through studies in Florida and Italy, among others. Through these applications, the karst disturbance index has evolved into two commonly used methods of application; yet, the karst disturbance index is still susceptible to evaluation and modification for application in other areas around the world. The geographically isolated and highly vulnerable municipality of Arecibo, Puerto Rico's karst area provides an opportunity to test the usefulness and validity of the karst disturbance index in an island setting and to compare and further refine the application of the original and modified methods. This study found the both methods of karst disturbance index application resulted in high disturbance scores (Original Method 0.54 and Modified Method 0.69, respectively) and uncovered multiple considerations for the improvement of the karst disturbance index. An evaluation of multiple methods together in an island setting also resulted in the need for adding additional indicators, including Mogote Removal and Coastal Karst. Collectively, the results provide a holistic approach to using the karst disturbance index in an island karst setting and suggest a modified method by which scaling and weighting may compensate for the difference between the original and modified method scores and allow interested stakeholders to evaluate disturbance regardless of his or her level of expertise.

[Impact of tillage and nutrient management practices on the spring weed community in a winter wheat-summer maize rotation farmland].

PubMed

Wang, Neng Wei; Ge, Xiu Li; Li, Sheng Dong

2017-03-18

Conservation tillage and the weed diversity are two hot issues in the modern ecological agriculture. Although it is known that the diversity of weed would increase slightly in the farmland under conservation tillage, the interaction effects between the tillage and the nutrient management on the weed community are not clear. In this study, one wheat-maize rotation field located in Ji'nan, Shandong Province, was selected as the studying site. Different tillage methods (no-tillage, deep subsoiling, rotary tillage, deep tillage) and different nutrient managements (farmers routine, 480 kg N hm -2 per year; high production and efficiency, 360 kg N hm -2 per year; optimal management, 300 kg N hm -2 per year) were carried out for 3 years. The characteristics of the spring weed communities under different managements were investigated and compared. The results showed that there were 15 species in the spring weed communities in the test filed and Digitaria sanguinalis and Echinochloa crusgalli were the dominant species. The plots under no-tillage or deep subsoiling had higher weed densities compared with those under the deep tillage or rotary tillage. In terms of the effect of tillage on the weed community diversity, both species richness index and species evenness index were lowest but the community dominance index was highest in the plots under deep tillage. In terms of the effect of the nutrient management, with the increase of fertilizer application, both species richness and evenness index increased under the different tillage methods. The community dominance increased with the increasing fertilizer application under deep tillage or rotary tillage and vice versa under no-tillage, deep subsoiling. In terms of weed biomass, the plots under no-tillage or deep subsoiling had significantly higher weed biomass than those under the other two tillage methods. The plots under routine nutrient management had higher weed biomass than those under the other two nutrient managements. Among all these treatments, the plots under the combination treatment of no-tillage and routine nutrient management had the highest weed biomass. According to these results, it was implied that no-tillage and fertilization would improve species richness index, species evenness index, and the productivity of spring weed community in the wheat-maize farmland.

Feathering effect detection and artifact agglomeration index-based video deinterlacing technique

NASA Astrophysics Data System (ADS)

Martins, André Luis; Rodrigues, Evandro Luis Linhari; de Paiva, Maria Stela Veludo

2018-03-01

Several video deinterlacing techniques have been developed, and each one presents a better performance in certain conditions. Occasionally, even the most modern deinterlacing techniques create frames with worse quality than primitive deinterlacing processes. This paper validates that the final image quality can be improved by combining different types of deinterlacing techniques. The proposed strategy is able to select between two types of deinterlaced frames and, if necessary, make the local correction of the defects. This decision is based on an artifact agglomeration index obtained from a feathering effect detection map. Starting from a deinterlaced frame produced by the "interfield average" method, the defective areas are identified, and, if deemed appropriate, these areas are replaced by pixels generated through the "edge-based line average" method. Test results have proven that the proposed technique is able to produce video frames with higher quality than applying a single deinterlacing technique through getting what is good from intra- and interfield methods.

The Nurses’ Well-Being Index and Factors Influencing This Index among Nurses in Central China: A Cross-Sectional Study

PubMed Central

Liu, Bing; Hu, Ying; Yu, Chuanhua

2015-01-01

Backgrounds/Objectives A discussion and analysis of factors that contribute to nurses’ happiness index can be useful in developing effective interventions to improve nurses’ enthusiasm, sense of honor and pride and to improve the efficiency and quality of medical services. Methods In this study, 206 registered nurses at the 2011 annual encounter for 12 Hanchuan hospitals completed a questionnaire survey that covered three aspects of the well-being index and thus served as a comprehensive well-being and general information tool. Results Based on their index score, the nurses’ overall happiness level was moderate. The dimensions of the happiness index are listed in descending order of their contribution to the nurses’ comprehensive happiness levels: health concerns, friendly relationships, self-worth, altruism, vitality, positive emotions, personality development, life satisfaction and negative emotions. Four variables (positive emotion, life satisfaction, negative emotions, and friendly relationships) jointly explained 47.80% of the total variance of the happiness index; positive emotions had the greatest impact on the happiness index. Conclusions Appropriate nursing interventions can improve nurses’ happiness index scores, thereby increasing nurses’ motivation and promoting the development of their nursing practice. PMID:26680594

Study on the refractive index matching effect of ultrasound on optical clearing of bio-tissues based on the derivative total reflection method.

PubMed

Zeng, Huanhuan; Wang, Jin; Ye, Qing; Deng, Zhichao; Mei, Jianchun; Zhou, Wenyuan; Zhang, Chunping; Tian, Jianguo

2014-10-01

In recent years, the tissue optical clearing (OC) technique in the biomedicine field has drawn lots of attention. Various physical and chemical methods have been introduced to improve the efficacy of OC. In this study, the effect of the combination of glycerol and ultrasound treatment on OC of in vitro porcine muscle tissues has been investigated. The refractive index (RI) matching mechanism of OC was directly observed based on the derivative total reflection method. A theoretical model was used to simulate the proportion of tissue fluid in the illuminated area. Moreover, the total transmittance spectra have been obtained by a spectrometer over the range from 450 nm to 700 nm. The administration of glycerol and ultrasound has led to an increase of the RI of background medium and a more RI matching environment was achieved. The experimental results support the validity of the ultrasound treatment for OC. The RI matching mechanism has been firstly quantitatively analyzed based on the derivative total reflection method.

Radiation Dose Index of Renal Colic Protocol CT Studies in the United States

PubMed Central

Lukasiewicz, Adam; Bhargavan-Chatfield, Mythreyi; Coombs, Laura; Ghita, Monica; Weinreb, Jeffrey; Gunabushanam, Gowthaman; Moore, Christopher L.

2016-01-01

Purpose To determine radiation dose indexes for computed tomography (CT) performed with renal colic protocols in the United States, including frequency of reduced-dose technique usage and any institutional-level factors associated with high or low dose indexes. Materials and Methods The Dose Imaging Registry (DIR) collects deidentified CT data, including examination type and dose indexes, for CT performed at participating institutions; thus, the DIR portion of the study was exempt from institutional review board approval and was HIPAA compliant. CT dose indexes were examined at the institutional level for CT performed with a renal colic protocol at institutions that contributed at least 10 studies to the registry as of January 2013. Additionally, patients undergoing CT for renal colic at a single institution (with institutional review board approval and informed consent from prospective subjects and waiver of consent from retrospective subjects) were studied to examine individual renal colic CT dose index patterns and explore relationships between patient habitus, demographics, and dose indexes. Descriptive statistics were used to analyze dose indexes, and linear regression and Spearman correlations were used to examine relationships between dose indexes and institutional factors. Results There were 49 903 renal colic protocol CT examinations conducted at 93 institutions between May 2011 and January 2013. Mean age ± standard deviation was 49 years ± 18, and 53.9% of patients were female. Institutions contributed a median of 268 (interquartile range, 77–699) CT studies. Overall mean institutional dose-length product (DLP) was 746 mGy · cm (effective dose, 11.2 mSv), with a range of 307–1497 mGy · cm (effective dose, 4.6–22.5 mSv) for mean DLPs. Only 2% of studies were conducted with a DLP of 200 mGy · cm or lower (a “reduced dose”) (effective dose, 3 mSv), and only 10% of institutions kept DLP at 400 mGy · cm (effective dose, 6 mSv) or less in at least 50% of patients. Conclusion Reduced-dose renal protocol CT is used infrequently in the United States. Mean dose index is higher than reported previously, and institutional variation is substantial. PMID:24484064

Use of Segregation Indices, Townsend Index, and Air Toxics Data to Assess Lifetime Cancer Risk Disparities in Metropolitan Charleston, South Carolina, USA

PubMed Central

Rice, LaShanta J.; Jiang, Chengsheng; Wilson, Sacoby M.; Burwell-Naney, Kristen; Samantapudi, Ashok; Zhang, Hongmei

2014-01-01

Background: Studies have demonstrated a relationship between segregation and level of education, occupational opportunities, and risk behaviors, yet a paucity of research has elucidated the association between racial residential segregation, socioeconomic deprivation, and lifetime cancer risk. Objectives: We examined estimated lifetime cancer risk from air toxics by racial composition, segregation, and deprivation in census tracts in Metropolitan Charleston. Methods: Segregation indices were used to measure the distribution of groups of people from different races within neighborhoods. The Townsend Index was used to measure economic deprivation in the study area. Poisson multivariate regressions were applied to assess the association of lifetime cancer risk with segregation indices and Townsend Index along with several sociodemographic measures. Results: Lifetime cancer risk from all pollution sources was 28 persons/million for half of the census tracts in Metropolitan Charleston. Isolation Index and Townsend Index both showed significant correlation with lifetime cancer risk from different sources. This significance still holds after adjusting for other sociodemographic measures in a Poisson regression, and these two indices have stronger effect on lifetime cancer risk compared to the effects of sociodemographic measures. Conclusions: We found that material deprivation, measured by the Townsend Index and segregation measured by the Isolation index, introduced high impact on lifetime cancer risk by air toxics at the census tract level. PMID:24852759

Practical life log video indexing based on content and context

NASA Astrophysics Data System (ADS)

Tancharoen, Datchakorn; Yamasaki, Toshihiko; Aizawa, Kiyoharu

2006-01-01

Today, multimedia information has gained an important role in daily life and people can use imaging devices to capture their visual experiences. In this paper, we present our personal Life Log system to record personal experiences in form of wearable video and environmental data; in addition, an efficient retrieval system is demonstrated to recall the desirable media. We summarize the practical video indexing techniques based on Life Log content and context to detect talking scenes by using audio/visual cues and semantic key frames from GPS data. Voice annotation is also demonstrated as a practical indexing method. Moreover, we apply body media sensors to record continuous life style and use body media data to index the semantic key frames. In the experiments, we demonstrated various video indexing results which provided their semantic contents and showed Life Log visualizations to examine personal life effectively.

Determination of effective complex refractive index of a turbid liquid with surface plasmon resonance phase detection.

PubMed

Yingying, Zhang; Jiancheng, Lai; Cheng, Yin; Zhenhua, Li

2009-03-01

The dependence of the surface plasmon resonance (SPR) phase difference curve on the complex refractive index of a sample in Kretschmann configuration is discussed comprehensively, based on which a new method is proposed to measure the complex refractive index of turbid liquid. A corresponding experiment setup was constructed to measure the SPR phase difference curve, and the complex refractive index of turbid liquid was determined. By using the setup, the complex refractive indices of Intralipid solutions with concentrations of 5%, 10%, 15%, and 20% are obtained to be 1.3377+0.0005 i, 1.3427+0.0028 i, 1.3476+0.0034 i, and 1.3496+0.0038 i, respectively. Furthermore, the error analysis indicates that the root-mean-square errors of both the real and the imaginary parts of the measured complex refractive index are less than 5x10(-5).

The risk of musculoskeletal disorders for workers due to repetitive movements during tomato harvesting.

PubMed

Cecchini, M; Colantoni, A; Massantini, R; Monarca, D

2010-04-01

Tomatoes are the most common crop in Italy. The production cycle requires operations in the field and factory that can cause musculoskeletal disorders due to the repetitive movements of the upper limbs of the workers employed in the sorting phase. This research aims to evaluate these risks using the OCRA (occupational repetitive actions) index method This method is based firstly on the calculation of a maximum number of recommended actions, related to the way the operation is performed, and secondly on a comparison of the number of actions effectively carried out by the upper limb with the recommended calculated value. The results of the risk evaluation for workers who manually sort tomatoes during harvest showed a risk for the workers, with an exposure index greater than 20; the OCRA index defines an index higher than 3.5 as unacceptable. The present trend of replacing manual sorting onboard a vehicle with optical sorters seems to be appropriate to reduce the risk of work-related musculoskeletal disorders (WMSDs) and is supported from both a financial point of view and as a quality control measure.

Polarization-based index of refraction and reflection angle estimation for remote sensing applications.

PubMed

Thilak, Vimal; Voelz, David G; Creusere, Charles D

2007-10-20

A passive-polarization-based imaging system records the polarization state of light reflected by objects that are illuminated with an unpolarized and generally uncontrolled source. Such systems can be useful in many remote sensing applications including target detection, object segmentation, and material classification. We present a method to jointly estimate the complex index of refraction and the reflection angle (reflected zenith angle) of a target from multiple measurements collected by a passive polarimeter. An expression for the degree of polarization is derived from the microfacet polarimetric bidirectional reflectance model for the case of scattering in the plane of incidence. Using this expression, we develop a nonlinear least-squares estimation algorithm for extracting an apparent index of refraction and the reflection angle from a set of polarization measurements collected from multiple source positions. Computer simulation results show that the estimation accuracy generally improves with an increasing number of source position measurements. Laboratory results indicate that the proposed method is effective for recovering the reflection angle and that the estimated index of refraction provides a feature vector that is robust to the reflection angle.

A New MI-Based Visualization Aided Validation Index for Mining Big Longitudinal Web Trial Data

PubMed Central

Zhang, Zhaoyang; Fang, Hua; Wang, Honggang

2016-01-01

Web-delivered clinical trials generate big complex data. To help untangle the heterogeneity of treatment effects, unsupervised learning methods have been widely applied. However, identifying valid patterns is a priority but challenging issue for these methods. This paper, built upon our previous research on multiple imputation (MI)-based fuzzy clustering and validation, proposes a new MI-based Visualization-aided validation index (MIVOOS) to determine the optimal number of clusters for big incomplete longitudinal Web-trial data with inflated zeros. Different from a recently developed fuzzy clustering validation index, MIVOOS uses a more suitable overlap and separation measures for Web-trial data but does not depend on the choice of fuzzifiers as the widely used Xie and Beni (XB) index. Through optimizing the view angles of 3-D projections using Sammon mapping, the optimal 2-D projection-guided MIVOOS is obtained to better visualize and verify the patterns in conjunction with trajectory patterns. Compared with XB and VOS, our newly proposed MIVOOS shows its robustness in validating big Web-trial data under different missing data mechanisms using real and simulated Web-trial data. PMID:27482473

Polarization-based index of refraction and reflection angle estimation for remote sensing applications

NASA Astrophysics Data System (ADS)

Thilak, Vimal; Voelz, David G.; Creusere, Charles D.

2007-10-01

A passive-polarization-based imaging system records the polarization state of light reflected by objects that are illuminated with an unpolarized and generally uncontrolled source. Such systems can be useful in many remote sensing applications including target detection, object segmentation, and material classification. We present a method to jointly estimate the complex index of refraction and the reflection angle (reflected zenith angle) of a target from multiple measurements collected by a passive polarimeter. An expression for the degree of polarization is derived from the microfacet polarimetric bidirectional reflectance model for the case of scattering in the plane of incidence. Using this expression, we develop a nonlinear least-squares estimation algorithm for extracting an apparent index of refraction and the reflection angle from a set of polarization measurements collected from multiple source positions. Computer simulation results show that the estimation accuracy generally improves with an increasing number of source position measurements. Laboratory results indicate that the proposed method is effective for recovering the reflection angle and that the estimated index of refraction provides a feature vector that is robust to the reflection angle.

An Index and Test of Linear Moderated Mediation.

PubMed

Hayes, Andrew F

2015-01-01

I describe a test of linear moderated mediation in path analysis based on an interval estimate of the parameter of a function linking the indirect effect to values of a moderator-a parameter that I call the index of moderated mediation. This test can be used for models that integrate moderation and mediation in which the relationship between the indirect effect and the moderator is estimated as linear, including many of the models described by Edwards and Lambert ( 2007 ) and Preacher, Rucker, and Hayes ( 2007 ) as well as extensions of these models to processes involving multiple mediators operating in parallel or in serial. Generalization of the method to latent variable models is straightforward. Three empirical examples describe the computation of the index and the test, and its implementation is illustrated using Mplus and the PROCESS macro for SPSS and SAS.

Efficient Forest Fire Detection Index for Application in Unmanned Aerial Systems (UASs).

PubMed

Cruz, Henry; Eckert, Martina; Meneses, Juan; Martínez, José-Fernán

2016-06-16

This article proposes a novel method for detecting forest fires, through the use of a new color index, called the Forest Fire Detection Index (FFDI), developed by the authors. The index is based on methods for vegetation classification and has been adapted to detect the tonalities of flames and smoke; the latter could be included adaptively into the Regions of Interest (RoIs) with the help of a variable factor. Multiple tests have been performed upon database imagery and present promising results: a detection precision of 96.82% has been achieved for image sizes of 960 × 540 pixels at a processing time of 0.0447 seconds. This achievement would lead to a performance of 22 f/s, for smaller images, while up to 54 f/s could be reached by maintaining a similar detection precision. Additional tests have been performed on fires in their early stages, achieving a precision rate of p = 96.62%. The method could be used in real-time in Unmanned Aerial Systems (UASs), with the aim of monitoring a wider area than through fixed surveillance systems. Thus, it would result in more cost-effective outcomes than conventional systems implemented in helicopters or satellites. UASs could also reach inaccessible locations without jeopardizing people's safety. On-going work includes implementation into a commercially available drone.

Modified Optimization Water Index (mowi) for LANDSAT-8 Oli/tirs

NASA Astrophysics Data System (ADS)

Moradi, M.; Sahebi, M.; Shokri, M.

2017-09-01

Water is one of the most important resources that essential need for human life. Due to population growth and increasing need of human to water, proper management of water resources will be one of the serious challenges of next decades. Remote sensing data is the best way to the management of water resources due time and cost effectiveness over a greater range of temporal and spatial scales. Between many kinds of satellite data, from SAR to optic or from high resolution to low resolution, Landsat imagery is more interesting data for water detection and management of earth surface water. Landsat8 OLI/TIRS is the newest version of Landsat satellite series. In this paper, we investigated the full spectral potential of Landsat8 for water detection. It is developed many kinds of methods for this purpose that index based methods have some advantages than other methods. Pervious indices just use a limited number of spectral band. In this paper, Modified Optimization Water Index (MOWI) defined by consideration of a linear combination of bands that each coefficient of bands calculated by particle swarm algorithm. The result shows that modified optimization water index (MOWI) has a proper performance on different condition like cloud, cloud shadow and mountain shadow.

Empirical Method to Estimate Hydrogen Embrittlement of Metals as a Function of Hydrogen Gas Pressure at Constant Temperature

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2010-01-01

High pressure Hydrogen (H) gas has been known to have a deleterious effect on the mechanical properties of certain metals, particularly, the notched tensile strength, fracture toughness and ductility. The ratio of these properties in Hydrogen as compared to Helium or Air is called the Hydrogen Environment Embrittlement (HEE) Index, which is a useful method to classify the severity of H embrittlement and to aid in the material screening and selection for safety usage H gas environment. A comprehensive world-wide database compilation, in the past 50 years, has shown that the HEE index is mostly collected at two conveniently high H pressure points of 5 ksi and 10 ksi near room temperature. Since H embrittlement is directly related to pressure, the lack of HEE index at other pressure points has posed a technical problem for the designers to select appropriate materials at a specific H pressure for various applications in aerospace, alternate and renewable energy sectors for an emerging hydrogen economy. Based on the Power-Law mathematical relationship, an empirical method to accurately predict the HEE index, as a function of H pressure at constant temperature, is presented with a brief review on Sievert's law for gas-metal absorption.

Heart rate is associated with markers of fatty acid desaturation: the GOCADAN study

PubMed Central

Ebbesson, Sven O.E.; Lopez-Alvarenga, Juan C.; Okin, Peter M.; Devereux, Richard B.; Tejero, Maria Elizabeth; Harris, William S.; Ebbesson, Lars O.E.; MacCluer, Jean W.; Wenger, Charlotte; Laston, Sandra; Fabsitz, Richard R.; Kennish, John; Howard, William J.; Howard, Barbara V.; Umans, Jason; Comuzzie, Anthony G.

2012-01-01

Objectives To determine if heart rate (HR) is associated with desaturation indexes as HR is associated with arrhythmia and sudden death. Study design A community based cross-sectional study of 1214 Alaskan Inuit. Methods Data of FA concentrations from plasma and red blood cell membranes from those ≥35 years of age (n =819) were compared to basal HR at the time of examination. Multiple linear regression with backward stepwise selection was employed to analyze the effect of the desaturase indexes on HR, after adjustment for relevant covariates. Results The Δ5 desaturase index (Δ5-DI) measured in serum has recently been associated with a protective role for cardiovascular disease. This index measured here in plasma and red blood cells showed a negative correlation with HR. The plasma stearoyl-CoA-desaturase (SCD) index, previously determined to be related to cardiovascular disease (CVD) mortality, on the other hand, was positively associated with HR, while the Δ6 desaturase index (Δ6-DI) had no significant effect on HR. Conclusion Endogenous FA desaturation is associated with HR and thereby, in the case of SCD, possibly with arrhythmia and sudden death, which would at least partially explain the previously observed association between cardiovascular mortality and desaturase activity. PMID:22456045

Effectiveness of Health Promotion Programmes for Truck Drivers: A Systematic Review

ERIC Educational Resources Information Center

Ng, Mandy K.; Yousuf, Bilal; Bigelow, Philip Lloyd; Van Eerd, Dwayne

2015-01-01

Objective: To review the characteristics of effective health promotion interventions for reducing chronic diseases and their risk factors in truck drivers. Methods: MEDLINE (PubMed), SCOPUS, Web of Science Conference Proceedings, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and the National Transportation Library were…

Using a laser source to measure the refractive index of glass beads and Debye theory analysis.

PubMed

Li, Shui-Yan; Qin, Shuang; Li, Da-Hai; Wang, Qiong-Hua

2015-11-20

Using a monochromatic laser beam to illuminate a homogeneous glass bead, some rainbows will appear around it. This paper concentrates on the study of the scattering intensity distribution and the method of measuring the refractive index for glass beads based on the Debye theory. It is found that the first rainbow due to the scattering superposition of backward light of the low-refractive-index glass beads can be explained approximately with the diffraction, the external reflection plus the one internal reflection, while the second rainbow of high-refractive-index glass beads is due to the contribution from the diffraction, the external reflection, the direct transmission, and the two internal reflections. The scattering intensity distribution is affected by the refractive index, the radius of the glass bead, and the incident beam width. The effects of the refractive index and the glass bead size on the first and second minimum deviation angle position are analyzed in this paper. The results of the measurements agree very well with the specifications.

The clinical applicability of an automated plethysmographic determination of the ankle-brachial index after vascular surgery.

PubMed

van der Slegt, Jasper; Verbogt, Nathalie Pa; Mulder, Paul Gh; Steunenberg, Stijn L; Steunenberg, Bastiaan E; van der Laan, Lijckle

2016-10-01

An automated ankle-brachial index device could lead to potential time savings and more accuracy in ankle-brachial index-determination after vascular surgery. This prospective cross-sectional study compared postprocedural ankle-brachial indices measured by a manual method with ankle-brachial indices of an automated plethysmographic method. Forty-two patients were included. No significant difference in time performing a measurement was observed (1.1 min, 95% CI: -0.2 to +2.4; P = 0.095). Mean ankle-brachial index with the automated method was 0.105 higher (95% CI: 0.017 to 0.193; P = 0.020) than with the manual method, with limits of agreement of -0.376 and +0.587. Total variance amounted to 0.0759 and the correlation between both methods was 0.60. Reliability expressed as maximum absolute difference (95% level) between duplicate ankle-brachial index-measurements under identical conditions was 0.350 (manual) and 0.152 (automated), although not significant (p = 0.053). Finally, the automated method had 34% points higher failure rate than the manual method. In conclusion based on this study, the automated ankle-brachial index-method seems not to be clinically applicable for measuring ankle-brachial index postoperatively in patients with vascular disease. © The Author(s) 2016.

Effects of a 2-Year School-Based Intervention of Enhanced Physical Education in the Primary School

ERIC Educational Resources Information Center

Sacchetti, Rossella; Ceciliani, Andrea; Garulli, Andrea; Dallolio, Laura; Beltrami, Patrizia; Leoni, Erica

2013-01-01

Background: This study aimed to assess whether a school-based physical education intervention was effective in improving physical abilities and influencing daily physical activity habits in primary school children. The possible effect on body mass index (BMI) was also considered. Methods: Twenty-six 3rd-grade classes were randomly selected…

Searching and Filtering Tweets: CSIRO at the TREC 2012 Microblog Track

DTIC Science & Technology

2012-11-01

stages. We first evaluate the effect of tweet corpus pre- processing in vanilla runs (no query expansion), and then assess the effect of query expansion...Effect of a vanilla run on D4 index (both realtime and non-real-time), and query expansion methods based on the submitted runs for two sets of queries

Fine-grained indexing of the biomedical literature: MeSH subheading attachment for a MEDLINE indexing tool.

PubMed

Névéol, Aurélie; Shooshan, Sonya E; Mork, James G; Aronson, Alan R

2007-10-11

This paper reports on the latest results of an Indexing Initiative effort addressing the automatic attachment of subheadings to MeSH main headings recommended by the NLM's Medical Text Indexer. Several linguistic and statistical approaches are used to retrieve and attach the subheadings. Continuing collaboration with NLM indexers also provided insight on how automatic methods can better enhance indexing practice. The methods were evaluated on corpus of 50,000 MEDLINE citations. For main heading/subheading pair recommendations, the best precision is obtained with a post-processing rule method (58%) while the best recall is obtained by pooling all methods (64%). For stand-alone subheading recommendations, the best performance is obtained with the PubMed Related Citations algorithm. Significant progress has been made in terms of subheading coverage. After further evaluation, some of this work may be integrated in the MEDLINE indexing workflow.

A novel evaluation method for building construction project based on integrated information entropy with reliability theory.

PubMed

Bai, Xiao-ping; Zhang, Xi-wei

2013-01-01

Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

A novel, fuzzy-based air quality index (FAQI) for air quality assessment

NASA Astrophysics Data System (ADS)

Sowlat, Mohammad Hossein; Gharibi, Hamed; Yunesian, Masud; Tayefeh Mahmoudi, Maryam; Lotfi, Saeedeh

2011-04-01

The ever increasing level of air pollution in most areas of the world has led to development of a variety of air quality indices for estimation of health effects of air pollution, though the indices have their own limitations such as high levels of subjectivity. Present study, therefore, aimed at developing a novel, fuzzy-based air quality index (FAQI ) to handle such limitations. The index developed by present study is based on fuzzy logic that is considered as one of the most common computational methods of artificial intelligence. In addition to criteria air pollutants (i.e. CO, SO 2, PM 10, O 3, NO 2), benzene, toluene, ethylbenzene, xylene, and 1,3-butadiene were also taken into account in the index proposed, because of their considerable health effects. Different weighting factors were then assigned to each pollutant according to its priority. Trapezoidal membership functions were employed for classifications and the final index consisted of 72 inference rules. To assess the performance of the index, a case study was carried out employing air quality data at five different sampling stations in Tehran, Iran, from January 2008 to December 2009, results of which were then compared to the results obtained from USEPA air quality index (AQI). According to the results from present study, fuzzy-based air quality index is a comprehensive tool for classification of air quality and tends to produce accurate results. Therefore, it can be considered useful, reliable, and suitable for consideration by local authorities in air quality assessment and management schemes. Fuzzy-based air quality index (FAQI).

Non-destructive geometric and refractive index characterization of single and multi-element lenses using optical coherence tomography

NASA Astrophysics Data System (ADS)

El-Haddad, Mohamed T.; Tao, Yuankai K.

2018-02-01

Design of optical imaging systems requires careful balancing of lens aberrations to optimize the point-spread function (PSF) and minimize field distortions. Aberrations and distortions are a result of both lens geometry and glass material. While most lens manufacturers provide optical models to facilitate system-level simulation, these models are often not reflective of true system performance because of manufacturing tolerances. Optical design can be further confounded when achromatic or proprietary lenses are employed. Achromats are ubiquitous in systems that utilize broadband sources due to their superior performance in balancing chromatic aberrations. Similarly, proprietary lenses may be custom-designed for optimal performance, but lens models are generally not available. Optical coherence tomography (OCT) provides non-contact, depth-resolved imaging with high axial resolution and sensitivity. OCT has been previously used to measure the refractive index of unknown materials. In a homogenous sample, the group refractive index is obtained as the ratio between the measured optical and geometric thicknesses of the sample. In heterogenous samples, a method called focus-tracking (FT) quantifies the effect of focal shift introduced by the sample. This enables simultaneous measurement of the thickness and refractive index of intermediate sample layers. Here, we extend the mathematical framework of FT to spherical surfaces, and describe a method based on OCT and FT for full characterization of lens geometry and refractive index. Finally, we validate our characterization method on commercially available singlet and doublet lenses.

Evaluation of experimental methods for assessing safety for ultrasound radiation force elastography.

PubMed

Skurczynski, M J; Duck, F A; Shipley, J A; Bamber, J C; Melodelima, D

2009-08-01

Standard test tools have been evaluated for the assessment of safety associated with a prototype transducer intended for a novel radiation force elastographic imaging system. In particular, safety has been evaluated by direct measurement of temperature rise, using a standard thermal test object, and detection of inertial cavitation from acoustic emission. These direct measurements have been compared with values of the thermal index and mechanical index, calculated from acoustic measurements in water using standard formulae. It is concluded that measurements using a thermal test object can be an effective alternative to the calculation of thermal index for evaluating thermal hazard. Measurement of the threshold for cavitation was subject to considerable variability, and it is concluded that the mechanical index still remains the preferred standard means for assessing cavitation hazard.

A population health approach to reducing observational intensity bias in health risk adjustment: cross sectional analysis of insurance claims.

PubMed

Wennberg, David E; Sharp, Sandra M; Bevan, Gwyn; Skinner, Jonathan S; Gottlieb, Daniel J; Wennberg, John E

2014-04-10

To compare the performance of two new approaches to risk adjustment that are free of the influence of observational intensity with methods that depend on diagnoses listed in administrative databases. Administrative data from the US Medicare program for services provided in 2007 among 306 US hospital referral regions. Cross sectional analysis. 20% sample of fee for service Medicare beneficiaries residing in one of 306 hospital referral regions in the United States in 2007 (n = 5,153,877). The effect of health risk adjustment on age, sex, and race adjusted mortality and spending rates among hospital referral regions using four indices: the standard Centers for Medicare and Medicaid Services--Hierarchical Condition Categories (HCC) index used by the US Medicare program (calculated from diagnoses listed in Medicare's administrative database); a visit corrected HCC index (to reduce the effects of observational intensity on frequency of diagnoses); a poverty index (based on US census); and a population health index (calculated using data on incidence of hip fractures and strokes, and responses from a population based annual survey of health from the Centers for Disease Control and Prevention). Estimated variation in age, sex, and race adjusted mortality rates across hospital referral regions was reduced using the indices based on population health, poverty, and visit corrected HCC, but increased using the standard HCC index. Most of the residual variation in age, sex, and race adjusted mortality was explained (in terms of weighted R2) by the population health index: R2=0.65. The other indices explained less: R2=0.20 for the visit corrected HCC index; 0.19 for the poverty index, and 0.02 for the standard HCC index. The residual variation in age, sex, race, and price adjusted spending per capita across the 306 hospital referral regions explained by the indices (in terms of weighted R2) were 0.50 for the standard HCC index, 0.21 for the population health index, 0.12 for the poverty index, and 0.07 for the visit corrected HCC index, implying that only a modest amount of the variation in spending can be explained by factors most closely related to mortality. Further, once the HCC index is visit corrected it accounts for almost none of the residual variation in age, sex, and race adjusted spending. Health risk adjustment using either the poverty index or the population health index performed substantially better in terms of explaining actual mortality than the indices that relied on diagnoses from administrative databases; the population health index explained the majority of residual variation in age, sex, and race adjusted mortality. Owing to the influence of observational intensity on diagnoses from administrative databases, the standard HCC index over-adjusts for regional differences in spending. Research to improve health risk adjustment methods should focus on developing measures of risk that do not depend on observation influenced diagnoses recorded in administrative databases.

Preload Monitoring of Bolted L-Shaped Lap Joints Using Virtual Time Reversal Method.

PubMed

Du, Fei; Xu, Chao; Wu, Guannan; Zhang, Jie

2018-06-13

L-shaped bolt lap joints are commonly used in aerospace and civil structures. However, bolt joints are frequently subjected to loosening, and this has a significant effect on the safety and reliability of these structures. Therefore, bolt preload monitoring is very important, especially at the early stage of loosening. In this paper, a virtual time reversal guided wave method is presented to monitor preload of bolted L-shaped lap joints accurately and simply. In this method, a referenced reemitting signal (RRS) is extracted from the bolted structure in fully tightened condition. Then the RRS is utilized as the excitation signal for the bolted structure in loosening states, and the normalized peak amplitude of refocused wave packet is used as the tightness index (TI A ). The proposed method is experimentally validated by L-shaped bolt joints with single and multiple bolts. Moreover, the selections of guided wave frequency and tightness index are also discussed. The results demonstrate that the relationship between TI A and bolt preload is linear. The detection sensitivity is improved significantly compared with time reversal (TR) method, particularly when bolt loosening is at its embryo stage. The results also show that TR method is an effective method for detection of the number of loosening bolts.

Nationwide desert highway assessment: a case study in China.

PubMed

Mao, Xuesong; Wang, Fuchun; Wang, Binggang

2011-07-01

The natural environment affects the construction of desert highways. Conversely, highway construction affects the natural environment and puts the ecological environment at a disadvantage. To satisfy the variety and hierarchy of desert highway construction and discover the spatio-temporal distribution of the natural environment and its effect on highway construction engineering, an assessment of the natural regional divisions of desert highways in China is carried out for the first time. Based on the general principles and method for the natural region division, the principles, method and index system for desert highway assessment is put forward by combining the desert highway construction features and the azonal differentiation law. The index system combines the dominant indicator and four auxiliary indicators. The dominant indicator is defined by the desert's comprehensive state index and the auxiliary indicators include the sand dune height, the blown sand strength, the vegetation coverage ratio and the annual average temperature difference. First the region is divided according to the dominant indicator. Then the region boundaries are amended according to the four auxiliary indicators. Finally the natural region division map for desert highway assessment is presented. The Chinese desert highways can be divided into three sections: the east medium effect region, the middle medium-severe effect region, and the west slight-medium effect region. The natural region division map effectively paves the way for the route planning, design, construction, maintenance and ongoing management of desert highways, and further helps environmental protection.

Nationwide Desert Highway Assessment: A Case Study in China

PubMed Central

Mao, Xuesong; Wang, Fuchun; Wang, Binggang

2011-01-01

The natural environment affects the construction of desert highways. Conversely, highway construction affects the natural environment and puts the ecological environment at a disadvantage. To satisfy the variety and hierarchy of desert highway construction and discover the spatio-temporal distribution of the natural environment and its effect on highway construction engineering, an assessment of the natural regional divisions of desert highways in China is carried out for the first time. Based on the general principles and method for the natural region division, the principles, method and index system for desert highway assessment is put forward by combining the desert highway construction features and the azonal differentiation law. The index system combines the dominant indicator and four auxiliary indicators. The dominant indicator is defined by the desert’s comprehensive state index and the auxiliary indicators include the sand dune height, the blown sand strength, the vegetation coverage ratio and the annual average temperature difference. First the region is divided according to the dominant indicator. Then the region boundaries are amended according to the four auxiliary indicators. Finally the natural region division map for desert highway assessment is presented. The Chinese desert highways can be divided into three sections: the east medium effect region, the middle medium-severe effect region, and the west slight-medium effect region. The natural region division map effectively paves the way for the route planning, design, construction, maintenance and ongoing management of desert highways, and further helps environmental protection. PMID:21845155

Clinical evaluation of a novel herbal dental cream in plaque formation: a double-blind, randomized, controlled clinical trial

PubMed Central

Amrutesh, Sunita; Malini, J; Tandur, Prakash S; Patki, Pralhad S

2010-01-01

Background The aim of this study was to evaluate the efficacy and safety of herbal dental cream in comparison to fluoride dental cream. Objectives Clinical evaluation of a novel herbal dental cream in plaque formation: a double-blind, randomized, controlled clinical trial. Methods One hundred and two patients with established dental plaque were randomly assigned to either herbal dental group or fluoride dental group for six weeks in a double-blind design. Improvement in plaque index, oral hygiene status, bleeding index, and gingival index was evaluated in these patients along with microbiological study. Results Results indicated a significant reduction in plaque index, gingival index, oral hygiene index, and microbial growth in both groups. Difference between the groups was not significant. There was no significant change in bleeding index. No adverse events were reported and both the dental creams were well tolerated. Conclusion The finding of this preliminary study indicates that herbal dental cream is as safe and effective as fluoride dental cream, but not superior to it. PMID:27186096

In vitro starch digestibility and expected glycemic index of pound cakes baked in two-cycle microwave-toaster and conventional oven.

PubMed

García-zaragoza, Francisco J; Sánchez-Pardo, María E; Ortiz-Moreno, Alicia; Bello-Pérez, Luis A

2010-11-01

Bread baking technology has an important effect on starch digestibility measured as its predicted glycemic index tested in vitro. The aim of this work was to evaluate the changes in predicted glycemic index of pound cake baked in a two-cycle microwave toaster and a conventional oven. The glycemic index was calculated from hydrolysis index values by the Granfeldt method. Non-significant differences (P > 0.05) were found in hydrolysis index (60.67 ± 3.96 for the product baked in microwave oven and 65.94 ± 4.09 for the product baked in conventional oven) and predicted glycemic index content (60.5 for product baked in microwave oven and 65 for the product baked in conventional oven) in freshly-baked samples. Results clearly demonstrate that the baking pound cake conventional process could be replicated using a two-cycle multifunction microwave oven, reducing the traditional baking time. Further research is required in order to achieve pound cake crumb uniformity.

Correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise

PubMed Central

Yoon, Jung-Gyu

2018-01-01

[Purpose] The purpose of this study was to examine correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise. [Subjects and Methods] The subjects of this study were 24 healthy men. C90 area, C90 angle, trace length, sway average velocity for body sway index were measured using a force plate by BT4. The collected data were analyzed using Kendall’s coefficient of concordance. [Results] All of body sway index on measuring follow up 24 hours after removing tape were significantly decreased than before and right after plyometric exercise. No significant correlations were found between body sway index and different expansibility of the elastic tape. [Conclusion] It appears that different expansibility of the elastic tape does not affect the ability to body sway index. Carry over effect of taping was verified on measuring follow up 24 hours after removing tape through the decreasing body sway index. PMID:29410564

A Comparison of Four Indices for Combining Distance and Dose Differences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Simon J., E-mail: simon.thomas@addenbrookes.nhs.uk; Cowley, Ian R.

2012-04-01

Purpose: When one is comparing two dose distributions, a number of methods have been published to combine dose difference and distance to agreement into a single measure. Some have been defined as pass/fail indices and some as numeric indices. We show that the pass/fail indices can all be used to derive numeric indices, and we compare the results of using these indices to evaluate one-dimensional (1D) and three-dimensional (3D) dose distributions, with the aim of selecting the most appropriate index for use in different circumstances. Methods and Materials: The indices compared are the gamma index, the kappa index, the indexmore » in International Commission on Radiation Units and Measurements Report 83, and a box index. Comparisons are made for 1D and 3D distributions. The 1D distribution is chosen to have a variety of dose gradients. The 3D distribution is taken from a clinical treatment plan. The effect of offsetting distributions by known distances and doses is studied. Results: The International Commission on Radiation Units and Measurements Report 83 index causes large discontinuities unless the dose gradient cutoff is set to equal the ratio of the dose tolerance to the distance tolerance. If it is so set, it returns identical results to the kappa index. Where the gradient is very high or very low, all the indices studied in this article give similar results for the same tolerance values. For moderate gradients, they differ, with the box index being the least strict, followed by the gamma index, and with the kappa index being the most strict. Conclusions: If the clinical tolerances are much greater than the uncertainties of the measuring system, the kappa index should be used, with tolerance values determined by the clinical tolerances. In cases where the uncertainties of the measuring system dominate, the box index will be best able to determine errors in the delivery system.« less

Effects of Indoor Horseback Riding and Virtual Reality Exercises on the Dynamic Balance Ability of Normal Healthy Adults

PubMed Central

Lee, Daehee; Lee, Sangyong; Park, Jungseo

2014-01-01

[Purpose] The objective of this study was to determine the effect of indoor horseback riding and virtual reality exercises on the dynamic balance ability of normal adults. [Subjects] This study enrolled 24 normal adults and divided them into two groups: an indoor horseback riding exercise group (IHREG, n = 12) and a virtual reality exercise group (VREG, n = 12). [Methods] IHREG exercised on indoor horseback riding equipment and VREG exercised using the Nintendo Wii Fit three times a week for six weeks. The Biodex Balance System was used to analyze dynamic balance as measured by the overall stability index (OSI), anteroposterior stability index (APSI), and mediolateral stability index (MLSI). [Results] In the within-group comparison, IHREG and VERG both showed significant decreases in the dynamic balance indexes of OSI, APSI, and MLSI after the intervention, but no significant difference was found between the groups. [Conclusion] Both indoor horseback riding and virtual reality exercises were effective at improving the subjects’ dynamic balance ability as measured by OSI, APSI, and MLSI, and can be used as additional exercises for patients with conditions affecting postural control. PMID:25540494

FACTORS ASSOCIATED WITH ODONTOGENIC BACTERAEMIA IN ORTHODONTIC PATIENTS.

PubMed

Umeh, O D; Sanu, O O; Utomi, I L; Nwaokorie, F O

2016-01-01

Various researches have investigated factors associated with the prevalence and intensity of bacteraemia following oral procedures including orthodontic procedures. The aim of this study was to determine the effect of age, gender, plaque and gingival indices on the occurrence of odontogenic bacteraemia following orthodontic treatment procedures. Orthodontic Clinic, Lagos University Teaching Hospital (LUTH), Lagos , Nigeria. Using the consecutive, convenience sampling method, a total of 100 subjects who met the inclusion criteria were recruited for the study and peripheral blood was collected before and again within 2 minutes of completion of orthodontic procedures for microbiologic analysis using the BACTEC automated blood culture system and the lysis filtration methods of blood culturing. The subjects were randomly placed in one of four orthodontic procedures investigated: alginate impression making (Group I), separator placement (Group II), band cementation (Group III) and arch wire change (Group IV). Plaque and gingival indices were assessed using the plaque component of the Simplified Oral Hygiene Index (OHI-S) (Greene & Vermillion) and Modified gingival index (Lobene) respectively before blood collection. Spearman Point bi-serial correlations and logistic regression statistics were used for statistical evaluations at p < 0.05 level. An overall baseline prevalence of bacteraemia of 3% and 17% were observed using the BACCTEC and lysis filtration methods respectively. Similarly, overall prevalence of bacteraemia following orthodontic treatment procedures of 16% and 28% were observed respectively using the BACTEC and lysis filtration methods. A statistically significant increase in the prevalence of bateraemia was observed following separator placement (p=0.016). An increase in age, plaque index scores and modified gingival index scores of the subjects were found to be associated with an increase in the prevalence of bacteraemia following orthodontic treatment procedures, with plaque index score showing the strongest correlation. Separator placement was found to induce significantly highest level of bacteraemia. Meticulous oral hygiene practice and the use of 0.2% chlorhexidine mouth rinse prior to separator placement may be considered an effective measure in reducing oral bacteria load and consequent reduction of the occurrence of bacteraemia following orthodontic treatment procedures.

Determination of the refractive index of microparticles by utilizing light dispersion properties of the particle and an immersion liquid.

PubMed

Niskanen, I; Räty, J; Peiponen, K E

2013-10-15

The knowledge of the refractive index of a particle is important in sensing and imaging applications, e.g., in biology, medicine and process industry. The refractive index of tiny solid particles such as microsize particles can be determined by the so-called liquid immersion technique. This study deals with three different types of interrogation methods to get the refractive index of a particle in a liquid matrix. These methods utilize thermo-optical properties and wavelength-dependent refractive index of the particle and the immersion liquids, as well as, the classical method using a set of in advance prepared set of immersion liquids with different refractive indices. The emphasis is on a method to get especially the wavelength-dependent refractive index of microparticles and exploiting different wavelength-dependences of immersion liquid and a solid particle because identification of a particle is more reliable if the refractive index of the particle is known at several wavelengths. In this study glycerol-water mixtures served as immersion liquids to obtain the refractive index of CaF2 at several discrete wavelengths in the spectral range 200-500 nm. The idea is to find the maximum value of light transmission of suspension by scanning the wavelength of a commercial spectrophotometer. The light dispersion-based method is suggested as a relatively easy, economic and fast method to determine the refractive index of a particle by a spectrophotometer at several wavelengths of light. The accuracy of the detection of the refractive index is suggested to be better than ± 0.005 refractive index units. © 2013 Elsevier B.V. All rights reserved.

Determination of the combustion behavior for pure components and mixtures using a 20-liter sphere

NASA Astrophysics Data System (ADS)

Mashuga, Chad Victor

1999-11-01

The safest method to prevent fires and explosions of flammable vapors is to prevent the existence of flammable mixtures in the first place. This methodology requires detailed knowledge of the flammability region as a function of the fuel, oxygen, and nitrogen concentrations. A triangular flammability diagram is the most useful tool to display the flammability region, and to determine if a flammable mixture is present during plant operations. An automated apparatus for assessing the flammability region and for determining the potential effect of confined fuel-air explosions is described. Data derived from the apparatus included the limits of combustion, maximum combustion pressure, and the deflagration index, or KG. Accurate measurement of these parameters can be influenced by numerous experimental conditions, including igniter energy, humidity and gas composition. Gas humidity had a substantial effect on the deflagration index, but had little effect on the maximum combustion pressure. Small changes in gas compositions had a greater effect on the deflagration index than the maximum combustion pressure. Both the deflagration indices and the maximum combustion pressure proved insensitive to the range of igniter energies examined. Estimation of flammability limits using a calculated adiabatic flame temperature (CAFT) method is demonstrated. The CAFT model is compared with the extensive experimental data from this work for methane, ethylene and a 50/50 mixture of methane and ethylene. The CAFT model compares well to methane and ethylene throughout the flammability zone when using a 1200K threshold temperature. Deviations between the method and the experimental data occurs in the fuel rich region. For the 50/50 fuel mixture the CAFT deviates only in the fuel rich region---the inclusion of carbonaceous soot as one of the equilibrium products improved the fit. Determination of burning velocities from a spherical flame model utilizing the extensive pressure---time data was also completed. The burning velocities determined compare well to other investigators using this method. The data collected for the methane/ethylene mixture was used to evaluate mixing rules for the flammability limits, maximum combustion pressure, deflagration index, and burning velocity. These rules attempt to predict the behavior of fuel mixtures from pure component data. Le Chatelier's law and averaging both work well for predicting the flammability boundary in the fuel lean region and for mixtures of inerted fuel and air. Both methods underestimate the flammability boundary in the fuel rich region. For a mixture of methane and ethylene, we were unable to identify mixing rules for estimating the maximum combustion pressure and the burning velocity from pure component data. Averaging the deflagration indices for fuel air mixtures did provide a adequate estimation of the mixture behavior. Le Chatelier's method overestimated the maximum deflagration index in air but provided a satisfactory estimation in the extreme fuel lean and rich regions.

[The new method monitoring crop water content based on NIR-Red spectrum feature space].

PubMed

Cheng, Xiao-juan; Xu, Xin-gang; Chen, Tian-en; Yang, Gui-jun; Li, Zhen-hai

2014-06-01

Moisture content is an important index of crop water stress condition, timely and effective monitoring of crop water content is of great significance for evaluating crop water deficit balance and guiding agriculture irrigation. The present paper was trying to build a new crop water index for winter wheat vegetation water content based on NIR-Red spectral space. Firstly, canopy spectrums of winter wheat with narrow-band were resampled according to relative spectral response function of HJ-CCD and ZY-3. Then, a new index (PWI) was set up to estimate vegetation water content of winter wheat by improveing PDI (perpendicular drought index) and PVI (perpendicular vegetation index) based on NIR-Red spectral feature space. The results showed that the relationship between PWI and VWC (vegetation water content) was stable based on simulation of wide-band multispectral data HJ-CCD and ZY-3 with R2 being 0.684 and 0.683, respectively. And then VWC was estimated by using PWI with the R2 and RMSE being 0.764 and 0.764, 3.837% and 3.840%, respectively. The results indicated that PWI has certain feasibility to estimate crop water content. At the same time, it provides a new method for monitoring crop water content using remote sensing data HJ-CCD and ZY-3.

Submergence Vulnerability Index development and application to Coastwide Reference Monitoring System Sites and Coastal Wetlands Planning, Protection and Restoration Act projects

USGS Publications Warehouse

Stagg, Camille L.; Sharp, Leigh A.; McGinnis, Thomas E.; Snedden, Gregg A.

2013-01-01

Since its implementation in 2003, the Coastwide Reference Monitoring System (CRMS) in Louisiana has facilitated the creation of a comprehensive dataset that includes, but is not limited to, vegetation, hydrologic, and soil metrics on a coastwide scale. The primary impetus for this data collection is to assess land management activities, including restoration efforts, across the coast. The aim of the CRMS analytical team is to provide a method to synthesize this data to enable multiscaled evaluations of activities in Louisiana’s coastal wetlands. Several indices have been developed to facilitate data synthesis and interpretation, including a Floristic Quality Index, a Hydrologic Index, and a Landscape Index. This document details the development of the Submergence Vulnerability Index, which incorporates sediment-elevation data as well as hydrologic data to determine the vulnerability of a wetland based on its ability to keep pace with sea-level rise. The objective of this document is to provide Federal and State sponsors, project managers, planners, landowners, data users, and the rest of the coastal restoration community with the following: (1) data collection and model development methods for the sediment-elevation response variables, and (2) a description of how these response variables will be used to evaluate CWPPRA project and program effectiveness.

Screening of antibacterial effects of anise essential oil alone and in combination with conventional antibiotics against Streptococcus pneumoniae clinical isolates.

PubMed

Gradinaru, Adina Catinca; Miron, Anca; Trifan, Adriana; Spac, A; Brebu, M; Aprotosoaie, Ana Clara

2014-01-01

This study aimed to investigate the effects of anise essential oil alone and in combination with conventional antibiotics (amoxicillin, ciprofloxacin) against Streptococcus pneumoniae clinical isolates. MATERIAL AND METHODs: Anise essential oil (AEO) was isolated by hydrodistillation from dried powdered fruits. Its chemical composition was investigated by GC-MS and GC-FID. Broth dilution assay was used to evaluate the antibacterial effects of anise essential oil. The interactions with antibiotics were studied by the checkerboard assay. Trans-anethole (90.18%) was identified as major constituent in anise essential oil. Almost all combinations AEO-amoxicillin and AEO-ciprofloxacin showed indifferent interactions (1 < FIC index < or = 2). Positive interactions (addition and weak synergism) were found only for four combinations AEO-amoxicillin (FIC index = 1,0.62, 0.75 and 0.5) and one combination AEO-ciprofloxacin (FIC index = 0.62). Herbal products containing anise essential oil may be used as expectorants in combination with amoxicillin or ciprofloxacin in Streptococcus pneumoniae infections without diminishing antibiotic efficacy.

Ecosystem Services Insights into Water Resources Management in China: A Case of Xi'an City.

PubMed

Liu, Jingya; Li, Jing; Gao, Ziyi; Yang, Min; Qin, Keyu; Yang, Xiaonan

2016-11-24

Global climate and environmental changes are endangering global water resources; and several approaches have been tested to manage and reduce the pressure on these decreasing resources. This study uses the case study of Xi'an City in China to test reasonable and effective methods to address water resource shortages. The study generated a framework combining ecosystem services and water resource management. Seven ecosystem indicators were classified as supply services, regulating services, or cultural services. Index values for each indicator were calculated, and based on questionnaire results, each index's weight was calculated. Using the Likert method, we calculated ecosystem service supplies in every region of the city. We found that the ecosystem's service capability is closely related to water resources, providing a method for managing water resources. Using Xi'an City as an example, we apply the ecosystem services concept to water resources management, providing a method for decision makers.

Fabrication of poly(vinyl carbazole) waveguides by oxygen ion implantation

NASA Astrophysics Data System (ADS)

Ghailane, Fatima; Manivannan, Gurusamy; Knystautas, Émile J.; Lessard, Roger A.

1995-08-01

Polymer waveguides were fabricated by ion implantation involving poly(vinyl carbazole) films. This material was implanted by oxygen ions (O ++ ) of energies ranging from 50 to 250 keV. The ion doses varied from 1010 to 1015 ions / cm2. The conventional prism-film coupler method was used to determine the waveguiding nature of the implanted and unimplanted films. The increase of the surface refractive index in the implanted layer has been studied by measuring the effective refractive index (neff) for different optical modes. Electron spectroscopy chemical analysis measurements were also performed to assess the effect of ion implantation on the polymer matrix.

Electromyogram as a measure of heavy metal toxicity in fresh water and salt water mussels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kidder, G.W. III; McCoy, A.A.

1996-02-01

The response of bivalves to heavy metals and other toxins has usually been determined by observing valve position. Since mussels close their valves to avoid noxious stimuli, experimental delivery of chemicals ins uncertain. To obtain constant results plastic spacers can be employed to hold the valves apart. This obviates valve position as an index of response and some other method is required. Electromyography of intact mussels is one such index, giving a simple, effective, and quantitative measurement of activity. Experiments are reported in this article on the effects of added mercury on salt water and fresh water species.

Evaluation of a reproductive index to estimate grasshopper sparrow and eastern meadowlark reproductive success

USGS Publications Warehouse

Althoff, Donald P.; Gipson, P.S.; Pontius, J.S.; Japuntich, R.D.

2009-01-01

We compared an index of reproductive success based on breeding behavior to actual nest fates of grasshopper sparrows (Ammodramus savannarum) and eastern meadowlarks (Sturnella magna) on 12 plots (4-ha). Concordance of results between the two methods was 58% for grasshopper sparrows and 42% for eastern meadowlarks on a plot-by-plot basis. The indirect method yielded higher estimates of reproductive activity than nest monitoring for the balance of the plots,. There was little evidence that brown-headed cowbird (Molothrus ater) parasitism influenced the estimates of reproductive success using the indirect method. We concluded that nests and about-to-fledge nestlings were missed during searches on some plots. It may be appropriate to use an indirect method to more efficiently survey territories and/or plots for species with hard-to-find nests or when monitoring large areas. Use of a reproductive index may be appropriate and more time-efficient than nest searching and monitoring for comparing management effects such as burning, grazing, haying, military training, and other localized disturbances that are likely to affect reproductive success of grasshopper sparrows and eastern meadowlarks. However, nest monitoring may be necessary for more precise estimates of productivity necessary for long-term monitoring. Nest monitoring results are also likely to allow for direct comparisons to results from other studies because the index method requires intimate knowledge of the species being evaluated - a factor that could lead to reduced precision because the experience level of technicians relying only on behavioral cues from study-to-study is likely to vary considerably.

Assessing critical source areas in watersheds for conservation buffer planning and riparian restoration.

PubMed

Qiu, Zeyuan

2009-11-01

A science-based geographic information system (GIS) approach is presented to target critical source areas in watersheds for conservation buffer placement. Critical source areas are the intersection of hydrologically sensitive areas and pollutant source areas in watersheds. Hydrologically sensitive areas are areas that actively generate runoff in the watershed and are derived using a modified topographic index approach based on variable source area hydrology. Pollutant source areas are the areas in watersheds that are actively and intensively used for such activities as agricultural production. The method is applied to the Neshanic River watershed in Hunterdon County, New Jersey. The capacity of the topographic index in predicting the spatial pattern of runoff generation and the runoff contribution to stream flow in the watershed is evaluated. A simple cost-effectiveness assessment is conducted to compare the conservation buffer placement scenario based on this GIS method to conventional riparian buffer scenarios for placing conservation buffers in agricultural lands in the watershed. The results show that the topographic index reasonably predicts the runoff generation in the watershed. The GIS-based conservation buffer scenario appears to be more cost-effective than the conventional riparian buffer scenarios.

Cell refractive index for cell biology and disease diagnosis: past, present and future.

PubMed

Liu, P Y; Chin, L K; Ser, W; Chen, H F; Hsieh, C-M; Lee, C-H; Sung, K-B; Ayi, T C; Yap, P H; Liedberg, B; Wang, K; Bourouina, T; Leprince-Wang, Y

2016-02-21

Cell refractive index is a key biophysical parameter, which has been extensively studied. It is correlated with other cell biophysical properties including mechanical, electrical and optical properties, and not only represents the intracellular mass and concentration of a cell, but also provides important insight for various biological models. Measurement techniques developed earlier only measure the effective refractive index of a cell or a cell suspension, providing only limited information on cell refractive index and hence hindering its in-depth analysis and correlation. Recently, the emergence of microfluidic, photonic and imaging technologies has enabled the manipulation of a single cell and the 3D refractive index of a single cell down to sub-micron resolution, providing powerful tools to study cells based on refractive index. In this review, we provide an overview of cell refractive index models and measurement techniques including microfluidic chip-based techniques for the last 50 years, present the applications and significance of cell refractive index in cell biology, hematology, and pathology, and discuss future research trends in the field, including 3D imaging methods, integration with microfluidics and potential applications in new and breakthrough research areas.

Variation of Biophysical Parameters of the Skin with Age, Gender, and Body Region

PubMed Central

Firooz, Alireza; Sadr, Bardia; Babakoohi, Shahab; Sarraf-Yazdy, Maryam; Fanian, Ferial; Kazerouni-Timsar, Ali; Nassiri-Kashani, Mansour; Naghizadeh, Mohammad Mehdi; Dowlati, Yahya

2012-01-01

Background. Understanding the physiological, chemical, and biophysical characteristics of the skin helps us to arrange a proper approach to the management of skin diseases. Objective. The aim of this study was to measure 6 biophysical characteristics of normal skin (sebum content, hydration, transepidermal water loss (TEWL), erythema index, melanin index, and elasticity) in a normal population and assess the effect of sex, age, and body location on them. Methods. Fifty healthy volunteers in 5 age groups (5 males and females in each) were enrolled in this study. A multifunctional skin physiology monitor (Courage & Khazaka electronic GmbH, Germany) was used to measure skin sebum content, hydration, TEWL, erythema index, melanin index, and elasticity in 8 different locations of the body. Results. There were significant differences between the hydration, melanin index, and elasticity of different age groups. Regarding the locations, forehead had the highest melanin index, where as palm had the lowest value. The mean values of erythema index and melanin index and TEWL were significantly higher in males and anatomic location was a significant independent factor for all of 6 measured parameters. Conclusion. Several biophysical properties of the skin vary among different gender, age groups, and body locations. PMID:22536139

Critical levels as applied to ozone for North American forests

Treesearch

Robert C. Musselman

2006-01-01

The United States and Canada have used concentration-based parameters for air quality standards for ozone effects on forests in North America. The European critical levels method for air quality standards uses an exposure-based parameter, a cumulative ozone concentration index with a threshold cutoff value. The critical levels method has not been used in North America...

Improved spring load restriction guidelines using mechanistic analysis

DOT National Transportation Integrated Search

2000-07-01

This project used research to develop more effective criteria for placement and removal of spring load restrictions (SLR). Researchers investigated a method that uses a thawing index equation based on air temperatures to predict thawing events. Resul...

Damage assessment of long-range rocket system by electromagnetic pulse weapon

NASA Astrophysics Data System (ADS)

Cao, Lingyu; Liu, Guoqing; Li, Jinming

2017-08-01

This paper analyzes the damage mechanism and characteristics of electromagnetic pulse weapon, establishes the index system of survivability of long-range rocket launcher system, and uses AHP method to establish the combat effectiveness model of long-range rocket missile system. According to the damage mechanism and characteristics of electromagnetic pulse weapon, the damage effect of the remote rocket system is established by using the exponential method to realize the damage efficiency of the remote rocket system.

Empirical methods for assessing meaningful neuropsychological change following epilepsy surgery.

PubMed

Sawrie, S M; Chelune, G J; Naugle, R I; Lüders, H O

1996-11-01

Traditional methods for assessing the neurocognitive effects of epilepsy surgery are confounded by practice effects, test-retest reliability issues, and regression to the mean. This study employs 2 methods for assessing individual change that allow direct comparison of changes across both individuals and test measures. Fifty-one medically intractable epilepsy patients completed a comprehensive neuropsychological battery twice, approximately 8 months apart, prior to any invasive monitoring or surgical intervention. First, a Reliable Change (RC) index score was computed for each test score to take into account the reliability of that measure, and a cutoff score was empirically derived to establish the limits of statistically reliable change. These indices were subsequently adjusted for expected practice effects. The second approach used a regression technique to establish "change norms" along a common metric that models both expected practice effects and regression to the mean. The RC index scores provide the clinician with a statistical means of determining whether a patient's retest performance is "significantly" changed from baseline. The regression norms for change allow the clinician to evaluate the magnitude of a given patient's change on 1 or more variables along a common metric that takes into account the reliability and stability of each test measure. Case data illustrate how these methods provide an empirically grounded means for evaluating neurocognitive outcomes following medical interventions such as epilepsy surgery.

Quantifying the Diversity and Similarity of Surgical Procedures Among Hospitals and Anesthesia Providers.

PubMed

Dexter, Franklin; Ledolter, Johannes; Hindman, Bradley J

2016-01-01

In this Statistical Grand Rounds, we review methods for the analysis of the diversity of procedures among hospitals, the activities among anesthesia providers, etc. We apply multiple methods and consider their relative reliability and usefulness for perioperative applications, including calculations of SEs. We also review methods for comparing the similarity of procedures among hospitals, activities among anesthesia providers, etc. We again apply multiple methods and consider their relative reliability and usefulness for perioperative applications. The applications include strategic analyses (e.g., hospital marketing) and human resource analytics (e.g., comparisons among providers). Measures of diversity of procedures and activities (e.g., Herfindahl and Gini-Simpson index) are used for quantification of each facility (hospital) or anesthesia provider, one at a time. Diversity can be thought of as a summary measure. Thus, if the diversity of procedures for 48 hospitals is studied, the diversity (and its SE) is being calculated for each hospital. Likewise, the effective numbers of common procedures at each hospital can be calculated (e.g., by using the exponential of the Shannon index). Measures of similarity are pairwise assessments. Thus, if quantifying the similarity of procedures among cases with a break or handoff versus cases without a break or handoff, a similarity index represents a correlation coefficient. There are several different measures of similarity, and we compare their features and applicability for perioperative data. We rely extensively on sensitivity analyses to interpret observed values of the similarity index.

Estimation of confidence limits for descriptive indexes derived from autoregressive analysis of time series: Methods and application to heart rate variability.

PubMed

Beda, Alessandro; Simpson, David M; Faes, Luca

2017-01-01

The growing interest in personalized medicine requires making inferences from descriptive indexes estimated from individual recordings of physiological signals, with statistical analyses focused on individual differences between/within subjects, rather than comparing supposedly homogeneous cohorts. To this end, methods to compute confidence limits of individual estimates of descriptive indexes are needed. This study introduces numerical methods to compute such confidence limits and perform statistical comparisons between indexes derived from autoregressive (AR) modeling of individual time series. Analytical approaches are generally not viable, because the indexes are usually nonlinear functions of the AR parameters. We exploit Monte Carlo (MC) and Bootstrap (BS) methods to reproduce the sampling distribution of the AR parameters and indexes computed from them. Here, these methods are implemented for spectral and information-theoretic indexes of heart-rate variability (HRV) estimated from AR models of heart-period time series. First, the MS and BC methods are tested in a wide range of synthetic HRV time series, showing good agreement with a gold-standard approach (i.e. multiple realizations of the "true" process driving the simulation). Then, real HRV time series measured from volunteers performing cognitive tasks are considered, documenting (i) the strong variability of confidence limits' width across recordings, (ii) the diversity of individual responses to the same task, and (iii) frequent disagreement between the cohort-average response and that of many individuals. We conclude that MC and BS methods are robust in estimating confidence limits of these AR-based indexes and thus recommended for short-term HRV analysis. Moreover, the strong inter-individual differences in the response to tasks shown by AR-based indexes evidence the need of individual-by-individual assessments of HRV features. Given their generality, MC and BS methods are promising for applications in biomedical signal processing and beyond, providing a powerful new tool for assessing the confidence limits of indexes estimated from individual recordings.

Estimation of confidence limits for descriptive indexes derived from autoregressive analysis of time series: Methods and application to heart rate variability

PubMed Central

2017-01-01

The growing interest in personalized medicine requires making inferences from descriptive indexes estimated from individual recordings of physiological signals, with statistical analyses focused on individual differences between/within subjects, rather than comparing supposedly homogeneous cohorts. To this end, methods to compute confidence limits of individual estimates of descriptive indexes are needed. This study introduces numerical methods to compute such confidence limits and perform statistical comparisons between indexes derived from autoregressive (AR) modeling of individual time series. Analytical approaches are generally not viable, because the indexes are usually nonlinear functions of the AR parameters. We exploit Monte Carlo (MC) and Bootstrap (BS) methods to reproduce the sampling distribution of the AR parameters and indexes computed from them. Here, these methods are implemented for spectral and information-theoretic indexes of heart-rate variability (HRV) estimated from AR models of heart-period time series. First, the MS and BC methods are tested in a wide range of synthetic HRV time series, showing good agreement with a gold-standard approach (i.e. multiple realizations of the "true" process driving the simulation). Then, real HRV time series measured from volunteers performing cognitive tasks are considered, documenting (i) the strong variability of confidence limits' width across recordings, (ii) the diversity of individual responses to the same task, and (iii) frequent disagreement between the cohort-average response and that of many individuals. We conclude that MC and BS methods are robust in estimating confidence limits of these AR-based indexes and thus recommended for short-term HRV analysis. Moreover, the strong inter-individual differences in the response to tasks shown by AR-based indexes evidence the need of individual-by-individual assessments of HRV features. Given their generality, MC and BS methods are promising for applications in biomedical signal processing and beyond, providing a powerful new tool for assessing the confidence limits of indexes estimated from individual recordings. PMID:28968394

Computing discharge using the index velocity method

USGS Publications Warehouse

Levesque, Victor A.; Oberg, Kevin A.

2012-01-01

Application of the index velocity method for computing continuous records of discharge has become increasingly common, especially since the introduction of low-cost acoustic Doppler velocity meters (ADVMs) in 1997. Presently (2011), the index velocity method is being used to compute discharge records for approximately 470 gaging stations operated and maintained by the U.S. Geological Survey. The purpose of this report is to document and describe techniques for computing discharge records using the index velocity method. Computing discharge using the index velocity method differs from the traditional stage-discharge method by separating velocity and area into two ratings—the index velocity rating and the stage-area rating. The outputs from each of these ratings, mean channel velocity (V) and cross-sectional area (A), are then multiplied together to compute a discharge. For the index velocity method, V is a function of such parameters as streamwise velocity, stage, cross-stream velocity, and velocity head, and A is a function of stage and cross-section shape. The index velocity method can be used at locations where stage-discharge methods are used, but it is especially appropriate when more than one specific discharge can be measured for a specific stage. After the ADVM is selected, installed, and configured, the stage-area rating and the index velocity rating must be developed. A standard cross section is identified and surveyed in order to develop the stage-area rating. The standard cross section should be surveyed every year for the first 3 years of operation and thereafter at a lesser frequency, depending on the susceptibility of the cross section to change. Periodic measurements of discharge are used to calibrate and validate the index rating for the range of conditions experienced at the gaging station. Data from discharge measurements, ADVMs, and stage sensors are compiled for index-rating analysis. Index ratings are developed by means of regression techniques in which the mean cross-sectional velocity for the standard section is related to the measured index velocity. Most ratings are simple-linear regressions, but more complex ratings may be necessary in some cases. Once the rating is established, validation measurements should be made periodically. Over time, validation measurements may provide additional definition to the rating or result in the creation of a new rating. The computation of discharge is the last step in the index velocity method, and in some ways it is the most straight-forward step. This step differs little from the steps used to compute discharge records for stage-discharge gaging stations. The ratings are entered into database software used for records computation, and continuous records of discharge are computed.

Effects of Lisdexamfetamine Dimesylate Treatment for ADHD on Growth

ERIC Educational Resources Information Center

Faraone, Stephen V.; Spencer, Thomas J.; Kollins, Scott H.; Glatt, Stephen J.

2010-01-01

Objective: To complete an exploratory uncontrolled study of the effects of lisdexamfetamine dimesylate (LDX) on growth of children treated for attention-deficit/hyperactivity disorder (ADHD). Method: Height, weight, and body mass index (BMI) from 281 children ages 6 to 13 years from longitudinal assessments up to 15 months were compared to norms…

Effects of empty bins on image upscaling in capsule endoscopy

NASA Astrophysics Data System (ADS)

Rukundo, Olivier

2017-07-01

This paper presents a preliminary study of the effect of empty bins on image upscaling in capsule endoscopy. The presented study was conducted based on results of existing contrast enhancement and interpolation methods. A low contrast enhancement method based on pixels consecutiveness and modified bilinear weighting scheme has been developed to distinguish between necessary empty bins and unnecessary empty bins in the effort to minimize the number of empty bins in the input image, before further processing. Linear interpolation methods have been used for upscaling input images with stretched histograms. Upscaling error differences and similarity indices between pairs of interpolation methods have been quantified using the mean squared error and feature similarity index techniques. Simulation results demonstrated more promising effects using the developed method than other contrast enhancement methods mentioned.

A new improved graphical and quantitative method for detecting bias in meta-analysis.

PubMed

Furuya-Kanamori, Luis; Barendregt, Jan J; Doi, Suhail A R

2018-04-04

Detection of publication and related biases remains suboptimal and threatens the validity and interpretation of meta-analytical findings. When bias is present, it usually differentially affects small and large studies manifesting as an association between precision and effect size and therefore visual asymmetry of conventional funnel plots. This asymmetry can be quantified and Egger's regression is, by far, the most widely used statistical measure for quantifying funnel plot asymmetry. However, concerns have been raised about both the visual appearance of funnel plots and the sensitivity of Egger's regression to detect such asymmetry, particularly when the number of studies is small. In this article, we propose a new graphical method, the Doi plot, to visualize asymmetry and also a new measure, the LFK index, to detect and quantify asymmetry of study effects in Doi plots. We demonstrate that the visual representation of asymmetry was better for the Doi plot when compared with the funnel plot. We also show that the diagnostic accuracy of the LFK index in discriminating between asymmetry due to simulated publication bias versus chance or no asymmetry was also better with the LFK index which had areas under the receiver operating characteristic curve of 0.74-0.88 with simulations of meta-analyses with five, 10, 15, and 20 studies. The Egger's regression result had lower areas under the receiver operating characteristic curve values of 0.58-0.75 across the same simulations. The LFK index also had a higher sensitivity (71.3-72.1%) than the Egger's regression result (18.5-43.0%). We conclude that the methods proposed in this article can markedly improve the ability of researchers to detect bias in meta-analysis.

The importance of normalisation in the construction of deprivation indices.

PubMed

Gilthorpe, M S

1995-12-01

Measuring socio-economic deprivation is a major challenge usually addressed through the use of composite indices. This paper aims to clarify the technical details regarding composite index construction. The distribution of some variables, for example unemployment, varies over time, and these variations must be considered when composite indices are periodically re-evaluated. The process of normalisation is examined in detail and particular attention is paid to the importance of symmetry and skewness of the composite variable distributions. Four different solutions of the Townsend index of socioeconomic deprivation are compared to reveal the effects that differing transformation processes have on the meaning or interpretation of the final index values. Differences in the rank order and the relative separation between values are investigated. Constituent variables which have been transformed to yield a more symmetric distribution provide indices that behave similarly, irrespective of the actual transformation methods adopted. Normalisation is seen to be of less importance than the removal of variable skewness. Furthermore, the degree of success of the transformation in removing skewness has a major effect in determining the variation between the individual electoral ward scores. Constituent variables undergoing no transformation produce an index that is distorted by the inherent variable skewness, and this index is not consistent between re-evaluations, either temporally or spatially. Effective transformation of constituent variables should always be undertaken when generating a composite index. The most important aspect is the removal of variable skewness. There is no need for the transformed variables to be normally distributed, only symmetrically distributed, before standardisation. Even where additional parameter weights are to be applied, which significantly alter the final index, appropriate transformation procedures should be adopted for the purpose of consistency over time and between different geographical areas.

Plasmonic nano-sensor based on metal-dielectric-metal waveguide with the octagonal cavity ring

NASA Astrophysics Data System (ADS)

Ghorbani, Saeed; Dashti, Mohammad Ali; Jabbari, Masoud

2018-06-01

In this paper, a refractive index plasmonic sensor including a waveguide of metal–insulator–metal with side coupled octagonal cavity ring has been suggested. The sensory and transmission feature of the structure has been analyzed numerically using Finite Element Method numerical solution. The effect of coupling distance and changing the width of metal–insulator–metal waveguide and refractive index of the dielectric located inside octagonal cavity—which are the effective factors in determining the sensory feature—have been examined so completely that the results of the numerical simulation show a linear relation between the resonance wavelength and refractive index of the liquid/gas dielectric material inside the octagonal cavity ring. High sensitivity of the sensor in the resonance wavelength, simplicity and a compact geometry are the advantages of the refractive plasmonic sensor advised which make that possible to use it for designing high performance nano-sensor and bio-sensing devices.

Method-independent, Computationally Frugal Convergence Testing for Sensitivity Analysis Techniques

NASA Astrophysics Data System (ADS)

Mai, J.; Tolson, B.

2017-12-01

The increasing complexity and runtime of environmental models lead to the current situation that the calibration of all model parameters or the estimation of all of their uncertainty is often computationally infeasible. Hence, techniques to determine the sensitivity of model parameters are used to identify most important parameters. All subsequent model calibrations or uncertainty estimation procedures focus then only on these subsets of parameters and are hence less computational demanding. While the examination of the convergence of calibration and uncertainty methods is state-of-the-art, the convergence of the sensitivity methods is usually not checked. If any, bootstrapping of the sensitivity results is used to determine the reliability of the estimated indexes. Bootstrapping, however, might as well become computationally expensive in case of large model outputs and a high number of bootstraps. We, therefore, present a Model Variable Augmentation (MVA) approach to check the convergence of sensitivity indexes without performing any additional model run. This technique is method- and model-independent. It can be applied either during the sensitivity analysis (SA) or afterwards. The latter case enables the checking of already processed sensitivity indexes. To demonstrate the method's independency of the convergence testing method, we applied it to two widely used, global SA methods: the screening method known as Morris method or Elementary Effects (Morris 1991) and the variance-based Sobol' method (Solbol' 1993). The new convergence testing method is first scrutinized using 12 analytical benchmark functions (Cuntz & Mai et al. 2015) where the true indexes of aforementioned three methods are known. This proof of principle shows that the method reliably determines the uncertainty of the SA results when different budgets are used for the SA. The results show that the new frugal method is able to test the convergence and therefore the reliability of SA results in an efficient way. The appealing feature of this new technique is the necessity of no further model evaluation and therefore enables checking of already processed sensitivity results. This is one step towards reliable and transferable, published sensitivity results.

Temperature-mortality relationship in dairy cattle in France based on an iso-hygro-thermal partition of the territory

NASA Astrophysics Data System (ADS)

Morignat, Eric; Gay, Emilie; Vinard, Jean-Luc; Calavas, Didier; Hénaux, Viviane

2017-11-01

The issue of global warming and more specifically its health impact on populations is increasingly concerning. The aim of our study was to evaluate the impact of temperature on dairy cattle mortality in France during the warm season (April-August). We therefore devised and implemented a spatial partitioning method to divide France into areas in which weather conditions were homogeneous, combining a multiple factor analysis with a clustering method using both weather and spatial data. We then used time-series regressions (2001-2008) to model the relationship between temperature humidity index (an index representing the temperature corrected by the relative humidity) and dairy cattle mortality within these areas. We found a significant effect of heat on dairy cattle mortality, but also an effect of cooler temperatures (to a lesser extent in some areas), which leads to a U-shaped relationship in the studied areas. Our partitioning approach based on weather criteria, associated with classic clustering methods, may contribute to better estimating temperature effects, a critical issue for animal health and welfare. Beyond the interest of its use in animal health, this approach can also be of interest in several situations in the frame of human health.

A Rapid Auto-Indexing Technology for Designing Readable E-Learning Content

ERIC Educational Resources Information Center

Yu, Pao-Ta; Liao, Yuan-Hsun; Su, Ming-Hsiang; Cheng, Po-Jen; Pai, Chun-Hsuan

2012-01-01

A rapid scene indexing method is proposed to improve retrieval performance for students accessing instructional videos. This indexing method is applied to anchor suitable indices to the instructional video so that students can obtain several small lesson units to gain learning mastery. The method also regulates online course progress. These…

[Therapeutic consequences of obstructive sleep apnea syndrome--results of drug, mechanical and surgical treatment].

PubMed

Fietze, I; Warmuth, R; Quispe-Bravo, S; Waschke, K

1993-12-01

The therapeutical strategy of the obstructive sleep apnoea syndrome depends on the differential diagnosis of the sleep disorder, the subjective complaints and the patients' individual cardiopulmonary risk profile. Basic requirements for a successful treatment are stepped concepts for therapy. Initial therapeutical methods are preventive measures such as adequate sleep hygiene, weight loss, and reduction of alcoholic intake. We investigated the effectiveness of following therapeutical methods: drug treatment, nasal CPAP therapy and surgical approach. We present the results of the first 151 treated patients aged between 15 and 88 years (mean: 50.8 +/- 11.5 SD). 20 patients with an apnoea index below 20 per hour were treated with theophylline. After 4 weeks with theophylline there were no significant changes in apnoea index, O2 saturation and snoring level. 24 patients themselves preferred the Uvulopalatopharyngoplasty (UPPP). 8 weeks after surgical approach we couldn't find significant changes in the apnoea index although 11 of these patients reported on a better sleep quality. 107 patients were treated with nasal CPAP. The effective CPAP pressures were between 6 and 14.5 mbar. Long term compliance with CPAP was studied in a survey of 70 patients who underwent a CPAP trial. After 6 months 97% were complaint, 17% of them additionally were using a humidifier. Our data show that effective therapy can be achieved with nCPAP objectively and subjectively. Other methods--theophylline and UPPP--are less successful. CPAP is likely to remain the first choice for treatment of sleep related breathing disorders and it should be applied more generously.

Global geometric torsion estimation in adolescent idiopathic scoliosis.

PubMed

Kadoury, Samuel; Shen, Jesse; Parent, Stefan

2014-04-01

Several attempts have been made to measure geometrical torsion in adolescent idiopathic scoliosis (AIS) and quantify the three-dimensional (3D) deformation of the spine. However, these approaches are sensitive to imprecisions in the 3D modeling of the anatomy and can only capture the effect locally at the vertebrae, ignoring the global effect at the regional level and thus have never been widely used to follow the progression of a deformity. The goal of this work was to evaluate the relevance of a novel geometric torsion descriptor based on a parametric modeling of the spinal curve as a 3D index of scoliosis. First, an image-based approach anchored on prior statistical distributions is used to reconstruct the spine in 3D from biplanar X-rays. Geometric torsion measuring the twisting effect of the spine is then estimated using a technique that approximates local arc-lengths with parametric curve fitting centered at the neutral vertebra in different spinal regions. We first evaluated the method with simulated experiments, demonstrating the method's robustness toward added noise and reconstruction inaccuracies. A pilot study involving 65 scoliotic patients exhibiting different types of deformities was also conducted. Results show the method is able to discriminate between different types of deformation based on this novel 3D index evaluated in the main thoracic and thoracolumbar/lumbar regions. This demonstrates that geometric torsion modeled by parametric spinal curve fitting is a robust tool that can be used to quantify the 3D deformation of AIS and possibly exploited as an index to classify the 3D shape.

Chemical Sensing Sensitivity of Long-Period Grating Sensor Enhanced by Colloidal Gold Nanoparticles

PubMed Central

Tang, Jaw-Luen; Wang, Jien-Neng

2008-01-01

A simple and effective method is proposed to improve spectral sensitivity and detection limit of long period gratings for refractive index or chemical sensing, where the grating surface is modified by a monolayer of colloidal gold nanoparticles. The transmission spectra and optical properties of gold nanospheres vary with the different refractive index of the environment near the surface of gold nanospheres. The sensor response of gold colloids increases linearly with solvents of increasing refractive index. The results for the measurement of sucrose and sodium chloride solutions are reported, which show that this type of sensor can provide a limiting resolution of ∼10-3 to ∼10-4 for refractive indices in the range of 1.34 to 1.39 and a noticeable increase in detection limit of refractive index to external medium. PMID:27879701

[Simplification of crop shortage water index and its application in drought remote sensing monitoring].

PubMed

Liu, Anlin; Li, Xingmin; He, Yanbo; Deng, Fengdong

2004-02-01

Based on the principle of energy balance, the method for calculating latent evaporation was simplified, and hence, the construction of the drought remote sensing monitoring model of crop water shortage index was also simplified. Since the modified model involved fewer parameters and reduced computing times, it was more suitable for the operation running in the routine services. After collecting the concerned meteorological elements and the NOAA/AVHRR image data, the new model was applied to monitor the spring drought in Guanzhong, Shanxi Province. The results showed that the monitoring results from the new model, which also took more considerations of the effects of the ground coverage conditions and meteorological elements such as wind speed and the water pressure, were much better than the results from the model of vegetation water supply index. From the view of the computing times, service effects and monitoring results, the simplified crop water shortage index model was more suitable for practical use. In addition, the reasons of the abnormal results of CWSI > 1 in some regions in the case studies were also discussed in this paper.

Link prediction with node clustering coefficient

NASA Astrophysics Data System (ADS)

Wu, Zhihao; Lin, Youfang; Wang, Jing; Gregory, Steve

2016-06-01

Predicting missing links in incomplete complex networks efficiently and accurately is still a challenging problem. The recently proposed Cannistrai-Alanis-Ravai (CAR) index shows the power of local link/triangle information in improving link-prediction accuracy. Inspired by the idea of employing local link/triangle information, we propose a new similarity index with more local structure information. In our method, local link/triangle structure information can be conveyed by clustering coefficient of common-neighbors directly. The reason why clustering coefficient has good effectiveness in estimating the contribution of a common-neighbor is that it employs links existing between neighbors of a common-neighbor and these links have the same structural position with the candidate link to this common-neighbor. In our experiments, three estimators: precision, AUP and AUC are used to evaluate the accuracy of link prediction algorithms. Experimental results on ten tested networks drawn from various fields show that our new index is more effective in predicting missing links than CAR index, especially for networks with low correlation between number of common-neighbors and number of links between common-neighbors.

A toxicity-based method for evaluating safety of reclaimed water for environmental reuses.

PubMed

Xu, Jianying; Zhao, Chuntao; Wei, Dongbin; Du, Yuguo

2014-10-01

A large quantity of toxic chemical pollutants possibly remains in reclaimed water due to the limited removal efficiency in traditional reclamation processes. It is not enough to guarantee the safety of reclaimed water using conventional water quality criteria. An integrated assessment method based on toxicity test is necessary to vividly depict the safety of reclaimed water for reuse. A toxicity test battery consisting of lethality, genotoxicity and endocrine disrupting effect was designed to screen the multiple biological effects of residual toxic chemicals in reclaimed water. The toxicity results of reclaimed water were converted into the equivalent concentrations of the corresponding positive reference substances (EQC). Simultaneously, the predicted no-effect concentration (PNEC) of each positive reference substance was obtained by analyzing the species sensitivity distribution (SSD) of toxicity data. An index "toxicity score" was proposed and valued as 1, 2, 3, or 4 depending on the ratio of the corresponding EQC to PNEC. For vividly ranking the safety of reclaimed water, an integrated assessment index "toxicity rank" was proposed, which was classified into A, B, C, or D rank with A being the safest. The proposed method was proved to be effective in evaluating reclaimed water samples in case studies. Copyright © 2014. Published by Elsevier B.V.

Effects of grazing on leaf area index, fractional cover and evapotranspiration by a desert phreatophyte community at a former uranium mill site on the Colorado Plateau

USGS Publications Warehouse

Bresloff, Cynthia J.; Nguyen, Uyen; Glenn, Edward P.; Waugh, Jody; Nagler, Pamela L.

2013-01-01

This study employed ground and remote sensing methods to monitor the effects of grazing on leaf area index (LAI), fractional cover (fc) and evapotranspiration (ET) of a desert phreatophyte community over an 11 year period at a former uranium mill site on the Colorado Plateau, U.S. Nitrate, ammonium and sulfate are migrating away from the mill site in a shallow alluvial aquifer. The phreatophyte community, consisting of Atriplex canescens (ATCA) and Sarcobatus vermiculatus (SAVE) shrubs, intercepts groundwater and could potentially slow the movement of the contaminant plume through evapotranspiration (ET). However, the site has been heavily grazed by livestock, reducing plant cover and LAI. We used livestock exclosures and revegetation plots to determine the effects of grazing on LAI, fc and ET, then projected the findings over the whole site using multi-platform remote sensing methods. We show that ET is approximately equal to annual precipitation at the site, but when ATCA and SAVE are protected from grazing they can develop high fc and LAI values, and ET can exceed annual precipitation, with the excess coming from groundwater discharge. Therefore, control of grazing could be an effective method to slow migration of contaminants at this and similar sites in the western U.S.

LC-PROM: Validation of a patient reported outcomes measure for liver cirrhosis patients.

PubMed

Zhang, Ying; Yang, Yuanyuan; Lv, Jing; Zhang, Yanbo

2016-05-10

The aim of the study is to develop a specific patient-reported scale of liver cirrhosis according to the Patient Reported Outcome guidelines of the Food and Drug Administration (FDA), and to examine its capacity to fill gaps in this field. A conceptual framework was developed and a preliminary item pool developed through literature review and interviews of 10 patients with liver cirrhosis. With the preliminary items, we performed a pilot survey that included a cognitive test with patients and interviews with experts; the focus was on content and language of the scale. In the item selection stage, seven statistical methods including discrete trends method, discrimination analysis, exploratory factor analysis, Cronbach's α coefficient, correlation coefficient, test-retest reliability, Item-Response Theory were applied to survey data from 200 subjects (150 liver cirrhosis patients and 50 controls). This produced the preliminary Liver Cirrhosis Patient-reported Outcome Measure (LC-PROM). In the next stage, we conducted the survey with 620 subjects (500 patients and 120 controls) to validate reliability, validity and acceptability of this scale. The 55 items and 13 dimensions addressed four domains: physical, psychological, social, and therapeutic. Cronbach's α coefficients were 0.921 for the total scale; the confirmatory factor analysis, t-tests and ANOVA supported scale validity; the model fit index as Root Mean Square Error of Approximation (RMSEA), Root Mean Square Residual (RMR), Normed Fit Index (NFI), Non-Normed Fit Index (NNFI), Comparative Fit Index (CFI) and Incremental Fit Index (IFI) met the criterion generally. The acceptance ratio and response rate indicated good feasibility. This study developed an accurate and stable patient-reported outcome scale of liver cirrhosis, which is able to evaluate clinical effects effectively, is helpful to patients in recognizing their health condition, and contributes to clinical decision making both for patients and physicians. Additionally, the LC-PROM can perform as an ultimate assessment of medical and health care effects and can inform clinical trials of new drugs for liver cirrhosis.

Evaluation of three indices for biofilm accumulation on complete dentures.

PubMed

Paranhos, Helena de Freitas Oliveira; Lovato da Silva, Claudia Helena; de Souza, Raphael Freitas; Pontes, Karina Matthes de Freitas

2010-03-01

The objective of this study was to evaluate the accuracy and reproducibility of three complete denture biofilm indices (Prosthesis Hygiene Index; Jeganathan et al. Index; Budtz-Jørgensen Index) by means of a computerised comparison method. Clinical studies into denture hygiene have employed a large number of biofilm indices among their outcome variables. However, the knowledge about the validity of these indices is still scarce. Sixty-two complete denture wearers were selected. The internal surfaces of the upper complete dentures were stained (5% erythrosine) and photographed. The slides were projected on paper, and the biofilm indices were applied over the photos by means of a scoring method. For the computerised method, the areas (total and biofilm-covered) were measured by dedicated software (Image Tool). In addition, to compare the results of the computerised method and Prosthetic Hygiene Index, a new scoring scale (including four and five graded) was introduced. For the Jeganathan et al. and Budtz-Jørgensen indices, the original scales were used. Values for each index were compared with the computerised method by the Friedman test. Their reproducibility was measured by means of weighed kappa. Significance for both tests was set at 0.05. The indices tested provided similar mean measures but they tended to overestimate biofilm coverage when compared with the computerised method (p < 0.001). Agreement between the Prosthesis Hygiene Index and the computerised method was not significant, regardless of the scale used. Jeghanathan et al. Index showed weak agreement, and consistent results were found for Budtz-Jorgensen Index (kappa = 0.19 and 0.39 respectively). Assessment of accuracy for the biofilm indices showed instrument bias that was similar among the tested methods. Weak inter-instrument reproducibility was found for the indices, except for the Budtz-Jørgensen Index. This should be the method of choice for clinical studies when more sophisticated approaches are not possible.

Experimental Study on Comprehensive Performance of Full Tailings Paste Filling in Jiaojia Gold Mine.

NASA Astrophysics Data System (ADS)

Zhang, Z. H.; Zou, Q. B.; Wang, P. Z.

2017-11-01

Filling mining method is the main method of modern underground mining. High concentration cementation is carried out using coarse tailing of +37 μm, and the mine has maturely used classified tailings paste filling technology. The gold mine studied on the performance of full tailings paste filling in order to maximize the use of tailings, reduce -37 μm fine tailings discharged into the tailing pond, reduce mining cost and eliminate security risks. The results show that: comprehensive index of full tailings paste filling is higher than that of classified tailings high concentration cementation filling, and the full tailings paste filling of 76% mass concentration has the best comprehensive index of slump, expansibility, yield stress and viscosity to meet the mining method requirements, which can effectively reduce the mining loss rate and dilution rate.

The lead-lag relationship between stock index and stock index futures: A thermal optimal path method

NASA Astrophysics Data System (ADS)

Gong, Chen-Chen; Ji, Shen-Dan; Su, Li-Ling; Li, Sai-Ping; Ren, Fei

2016-02-01

The study of lead-lag relationship between stock index and stock index futures is of great importance for its wide application in hedging and portfolio investments. Previous works mainly use conventional methods like Granger causality test, GARCH model and error correction model, and focus on the causality relation between the index and futures in a certain period. By using a non-parametric approach-thermal optimal path (TOP) method, we study the lead-lag relationship between China Securities Index 300 (CSI 300), Hang Seng Index (HSI), Standard and Poor 500 (S&P 500) Index and their associated futures to reveal the variance of their relationship over time. Our finding shows evidence of pronounced futures leadership for well established index futures, namely HSI and S&P 500 index futures, while index of developing market like CSI 300 has pronounced leadership. We offer an explanation based on the measure of an indicator which quantifies the differences between spot and futures prices for the surge of lead-lag function. Our results provide new perspectives for the understanding of the dynamical evolution of lead-lag relationship between stock index and stock index futures, which is valuable for the study of market efficiency and its applications.

A new integrated evaluation method of heavy metals pollution control during melting and sintering of MSWI fly ash.

PubMed

Li, Rundong; Li, Yanlong; Yang, Tianhua; Wang, Lei; Wang, Weiyun

2015-05-30

Evaluations of technologies for heavy metal control mainly examine the residual and leaching rates of a single heavy metal, such that developed evaluation method have no coordination or uniqueness and are therefore unsuitable for hazard control effect evaluation. An overall pollution toxicity index (OPTI) was established in this paper, based on the developed index, an integrated evaluation method of heavy metal pollution control was established. Application of this method in the melting and sintering of fly ash revealed the following results: The integrated control efficiency of the melting process was higher in all instances than that of the sintering process. The lowest integrated control efficiency of melting was 56.2%, and the highest integrated control efficiency of sintering was 46.6%. Using the same technology, higher integrated control efficiency conditions were all achieved with lower temperatures and shorter times. This study demonstrated the unification and consistency of this method. Copyright © 2015 Elsevier B.V. All rights reserved.

Method of identifying features in indexed data

DOEpatents

Jarman, Kristin H [Richland, WA; Daly, Don Simone [Richland, WA; Anderson, Kevin K [Richland, WA; Wahl, Karen L [Richland, WA

2001-06-26

The present invention is a method of identifying features in indexed data, especially useful for distinguishing signal from noise in data provided as a plurality of ordered pairs. Each of the plurality of ordered pairs has an index and a response. The method has the steps of: (a) providing an index window having a first window end located on a first index and extending across a plurality of indices to a second window end; (b) selecting responses corresponding to the plurality of indices within the index window and computing a measure of dispersion of the responses; and (c) comparing the measure of dispersion to a dispersion critical value. Advantages of the present invention include minimizing signal to noise ratio, signal drift, varying baseline signal and combinations thereof.

The Role of Tonsillectomy in Adults with Tonsillar Hypertrophy and Obstructive Sleep Apnea.

PubMed

Smith, Matthew M; Peterson, Ed; Yaremchuk, Kathleen L

2017-08-01

Objective To determine if tonsillectomy alone is an effective treatment in improving obstructive sleep apnea in adult subjects with tonsillar hypertrophy and to evaluate the effect of tonsillectomy on patient-reported quality-of-life indices. Study Design Case series with planned data collection. Setting Academic hospital. Subjects and Methods Thirty-four subjects completed enrollment and intervention from January 2011 to January 2016. Subjects completed pre- and postoperative quality-of-life questionnaires, including the Insomnia Severity Index, Epworth Sleepiness Scale, and the Functional Outcomes of Sleep Questionnaire-10. Surgical response to treatment was defined by a >50% decrease in the Apnea-Hypopnea Index and a decrease in the overall Apnea-Hypopnea Index to <20. Wilcoxon matched-pairs signed-rank tests were used to test each variable to assess for a change from pre- to postintervention. Subjects were then split into 3 BMI subgroups, with results also evaluated by Wilcoxon matched-pairs signed-rank tests. Results There was a significant difference discovered between the mean preoperative Apnea-Hypopnea Index of 31.57 and the mean postoperative value of 8.12 ( P < .001). All patient-reported outcomes improved significantly following tonsillectomy. After stratifying all outcome variables (Apnea-Hypopnea Index, Epworth Sleepiness Scale, Insomnia Severity Index, and Functional Outcomes of Sleep Questionnaire-10) by sex, race, and tonsil size, no statistically significant difference was noted among any of these subgroups. There was a 78% surgical response to treatment. Conclusion Tonsillectomy appears to be an effective treatment for obstructive sleep apnea in a select population of adults with tonsillar hypertrophy.

Broadband arrayed waveguide grating multiplexers on indium phosphide

NASA Astrophysics Data System (ADS)

Rausch, Kameron

2005-11-01

Coarse Wavelength Division Multiplexing (CWDM) is becoming a popular way to increase the optical throughput of fibers for short to medium haul networks at a reduced cost. The International Telecommunications Union (ITU) has defined the CWDM network to consist of eighteen channels with channel spacings of 20 nm starting at 1270 nm and ending at 1610 nm. Four and eight channel AWGs suitable for CWDM were fabricated using a versatile S-shape design novel to InP. The standard horseshoe layout will not work on semiconductor for AWGs with a free spectral range (FSR) larger than 30 nm. The AWG design provides operation insensitive to thermal and polarization fluctuations; which is key for low cost operation and packaging. It will be shown that, refractive index changes over the large operating wavelength band produced negligible effects in the transmission spectrum. Standard AWG design assumes refractive index is a constant over the operating wavelength band. As a result, the output waveguide separations are held constant on the second star coupler. As the channel number increases, secondary focal dispersion caused from a changing refractive index can have detrimental effects on performance. A new design method will be introduced which includes refractive index dispersion by allowing the output waveguide separations to vary. The new design is consistent with standard design but is applicable in materials with a linear index dispersion over an arbitrarily large wavelength band. Lastly, a method for increasing the transmission using multimode waveguides is discussed. Traditionally, single mode waveguides are required in order to prevent higher order waveguide modes creating ghost images in the output spectrum. Using bend loss and waveguide junction offsets, higher order modes can be filtered from the output, thereby eliminating ghost images and at the same time, increase transmission.

[Evaluation of tuberculosis transmission routes in an outbreak among young adults for developing an effective method for contact investigations].

PubMed

Toyota, Makoto

2012-12-01

To evaluate the various transmission routes of tuberculosis in an outbreak among young adults in order to develop an effective method for contact investigations. We reviewed the records of 21 tuberculosis patients involved in an outbreak of tuberculosis; the records were collected by conventional epidemiological studies. Mycobacterium tuberculosis isolates were genotyped using IS6110-based restriction fragment length polymorphism (RFLP). The index patient was a 26-year-old man whose 32-year-old brother was identified as the source patient of tuberculosis through a contact investigation. Investigation of their contacts led to the identification of 10 tuberculosis patients. Further, 5 more patients with only casual contact with the index or source patients developed tuberculosis 18-25 months after identification of the index patient. The RFLP analysis of strains obtained from these 5 patients as well as the index and source patients revealed an identical pattern. Further, 4 persons, among those who had epidemiological links with some of the above-mentioned 5 patients, developed tuberculosis 22-34 months after identification of the index patient. All 21 patients were relatively young. In total, 15 strains obtained from these patients were sent for the RFLP analysis, all of which showed an identical pattern. The epidemiological links were categorized into a household environment, an entertainment area, a university, a music band, and a construction site. Molecular epidemiology can provide insights into the process of tuberculosis transmission, which may otherwise go unrecognized by conventional contact investigations. Additionally, it can play an important role in identifying places of tuberculosis outbreaks and routes of transmission in a contact investigation.

Efficient Forest Fire Detection Index for Application in Unmanned Aerial Systems (UASs)

PubMed Central

Cruz, Henry; Eckert, Martina; Meneses, Juan; Martínez, José-Fernán

2016-01-01

This article proposes a novel method for detecting forest fires, through the use of a new color index, called the Forest Fire Detection Index (FFDI), developed by the authors. The index is based on methods for vegetation classification and has been adapted to detect the tonalities of flames and smoke; the latter could be included adaptively into the Regions of Interest (RoIs) with the help of a variable factor. Multiple tests have been performed upon database imagery and present promising results: a detection precision of 96.82% has been achieved for image sizes of 960 × 540 pixels at a processing time of 0.0447 seconds. This achievement would lead to a performance of 22 f/s, for smaller images, while up to 54 f/s could be reached by maintaining a similar detection precision. Additional tests have been performed on fires in their early stages, achieving a precision rate of p = 96.62%. The method could be used in real-time in Unmanned Aerial Systems (UASs), with the aim of monitoring a wider area than through fixed surveillance systems. Thus, it would result in more cost-effective outcomes than conventional systems implemented in helicopters or satellites. UASs could also reach inaccessible locations without jeopardizing people’s safety. On-going work includes implementation into a commercially available drone. PMID:27322264

Using the Solar Polar Magnetic Field for Longterm Predictions of Solar Activity, Solar Cycles 21-25

NASA Astrophysics Data System (ADS)

Pesnell, W. D.; Schatten, K. H.

2017-12-01

We briefly review the dynamo and geomagnetic precursor methods of long-term solar activity forecasting. These methods depend upon the most basic aspect of dynamo theory to predict future activity, future magnetic field arises directly from the amplification of pre-existing magnetic field. We then generalize the dynamo technique, allowing the method to be used at any phase of the solar cycle, to the Solar Dynamo Amplitude (SODA) index. This index is sensitive to the magnetic flux trapped within the Sun's convection zone but insensitive to the phase of the solar cycle. Since magnetic fields inside the Sun can become buoyant, one may think of the acronym SODA as describing the amount of buoyant flux. We will show how effective the SODA Index has been in predicting Solar Cycles 23 and 24, and present a unified picture of earlier estimates of the polar magnetic configuration in Solar Cycle 21 and 22. Using the present value of the SODA index, we estimate that the next cycle's smoothed peak activity will be about 125 ± 30 solar flux units for the 10.7 cm radio flux and a sunspot number of 70 ± 25. This suggests that Solar Cycle 25 will be comparable to Solar Cycle 24. Since the current approach uses data prior to solar minimum, these estimates may improve when the upcoming solar minimum is reached.

A population health approach to reducing observational intensity bias in health risk adjustment: cross sectional analysis of insurance claims

PubMed Central

Sharp, Sandra M; Bevan, Gwyn; Skinner, Jonathan S; Gottlieb, Daniel J

2014-01-01

Objective To compare the performance of two new approaches to risk adjustment that are free of the influence of observational intensity with methods that depend on diagnoses listed in administrative databases. Setting Administrative data from the US Medicare program for services provided in 2007 among 306 US hospital referral regions. Design Cross sectional analysis. Participants 20% sample of fee for service Medicare beneficiaries residing in one of 306 hospital referral regions in the United States in 2007 (n=5 153 877). Main outcome measures The effect of health risk adjustment on age, sex, and race adjusted mortality and spending rates among hospital referral regions using four indices: the standard Centers for Medicare and Medicaid Services—Hierarchical Condition Categories (HCC) index used by the US Medicare program (calculated from diagnoses listed in Medicare’s administrative database); a visit corrected HCC index (to reduce the effects of observational intensity on frequency of diagnoses); a poverty index (based on US census); and a population health index (calculated using data on incidence of hip fractures and strokes, and responses from a population based annual survey of health from the Centers for Disease Control and Prevention). Results Estimated variation in age, sex, and race adjusted mortality rates across hospital referral regions was reduced using the indices based on population health, poverty, and visit corrected HCC, but increased using the standard HCC index. Most of the residual variation in age, sex, and race adjusted mortality was explained (in terms of weighted R2) by the population health index: R2=0.65. The other indices explained less: R2=0.20 for the visit corrected HCC index; 0.19 for the poverty index, and 0.02 for the standard HCC index. The residual variation in age, sex, race, and price adjusted spending per capita across the 306 hospital referral regions explained by the indices (in terms of weighted R2) were 0.50 for the standard HCC index, 0.21 for the population health index, 0.12 for the poverty index, and 0.07 for the visit corrected HCC index, implying that only a modest amount of the variation in spending can be explained by factors most closely related to mortality. Further, once the HCC index is visit corrected it accounts for almost none of the residual variation in age, sex, and race adjusted spending. Conclusion Health risk adjustment using either the poverty index or the population health index performed substantially better in terms of explaining actual mortality than the indices that relied on diagnoses from administrative databases; the population health index explained the majority of residual variation in age, sex, and race adjusted mortality. Owing to the influence of observational intensity on diagnoses from administrative databases, the standard HCC index over-adjusts for regional differences in spending. Research to improve health risk adjustment methods should focus on developing measures of risk that do not depend on observation influenced diagnoses recorded in administrative databases. PMID:24721838

Center effect on ankle-brachial index measurement when using the reference method (Doppler and manometer): results from a large cohort study.

PubMed

Vierron, Emilie; Halimi, Jean-Michel; Tichet, Jean; Balkau, Beverley; Cogneau, Joel; Giraudeau, Bruno

2009-07-01

The ankle-brachial index (ABI) is a simple and noninvasive tool used to detect peripheral arterial disease (PAD). We aimed to assess, in a French multicenter cohort, the center effect associated with arterial pressure (AP) and ABI measurements using the reference method and using a semiautomatic device. This study included baseline and 9-year follow-up data from 3,664 volunteers of 10 health examination centers of the DESIR (Data from an Epidemiological Study on the Insulin Resistance) syndrome French cohort. Ankle and brachial AP were measured at inclusion by the reference method (a mercury sphygmomanometer coupled with a Doppler probe for ankle measurements) and at 9 years by a semiautomatic device (Omron HEM-705CP). The center effect was assessed by the intraclass correlation coefficient (ICC), ratio of the between-center variance to the total variance of the measurement. At inclusion, the sample mean age was 47.5 (s.d. 9.9) years; 49.3% were men. Although ICCs were smaller than 0.05 for brachial AP measurements, they were close to 0.18 and 0.20 for ankle systolic AP (SAP) and ABI measurements, respectively, when the reference method was used. No center effect for measures other than ankle SAP was detected. With the semiautomatic device method, all ICCs, including those for ankle SAP and ABI measurements, were between 0.005 and 0.04. We found an important center effect on ABI measured with a sphygmomanometer and a Doppler probe but not a semiautomatic device. A center effect should be taken into account when planning any multicenter study on ABI measurement.

The Effects of Intravenous Hydration on Amniotic Fluid Index in Pregnant Women with Preterm premature Rupture of Membranes: A Randomized Clinical Trial

PubMed Central

Shahnazi, Mahnaz; Tagavi, Simin; Hajizadeh, Khadije; Farshbaf Khalili, Azize

2013-01-01

Introduction: Preterm premature rupture of membranes (PPROM) can result in fetal complications such as oligohydramnios. This study aimed to determine the effects of intravenous (IV) fluid bolus on amniotic fluid index (AFI) in pregnant women with PPROM. Methods: 24 women with PPROM during singleton live pregnancy of 28 to 34 weeks whose baseline AFI was ≤ 5cm were randomized into two groups. The study group received one liter intravenous fluid bolus of isotonic Ringer serum during 30-minute period. Reevaluations of amniotic fluid index in both groups were made 90 minutes and 48 hours after baseline measurement. Independent t-test and paired t-test were used to compare the two groups and mean amniotic fluid index before and after treatment, respectively. Results: The results of this study demonstrate that AFI decreased statistically significant in both the control and study groups. AFI decreased in both groups at 48 hours later. This decrease was not statistically significant in any group. The mean change in AFI (90 minutes and baseline) and (48 hours and baseline) between the two groups were not significant. The time between mean baseline measurements and delivery were 196.41 and 140.58 hours in the study and control groups, respectively. This difference was not statistically significant. Conclusion: This study did not find significant impact of hydration On AFI as a prophylactic method on oligohydramnios in pregnant women with PPROM. PMID:25276709

MeSHLabeler: improving the accuracy of large-scale MeSH indexing by integrating diverse evidence

PubMed Central

Liu, Ke; Peng, Shengwen; Wu, Junqiu; Zhai, Chengxiang; Mamitsuka, Hiroshi; Zhu, Shanfeng

2015-01-01

Motivation: Medical Subject Headings (MeSHs) are used by National Library of Medicine (NLM) to index almost all citations in MEDLINE, which greatly facilitates the applications of biomedical information retrieval and text mining. To reduce the time and financial cost of manual annotation, NLM has developed a software package, Medical Text Indexer (MTI), for assisting MeSH annotation, which uses k-nearest neighbors (KNN), pattern matching and indexing rules. Other types of information, such as prediction by MeSH classifiers (trained separately), can also be used for automatic MeSH annotation. However, existing methods cannot effectively integrate multiple evidence for MeSH annotation. Methods: We propose a novel framework, MeSHLabeler, to integrate multiple evidence for accurate MeSH annotation by using ‘learning to rank’. Evidence includes numerous predictions from MeSH classifiers, KNN, pattern matching, MTI and the correlation between different MeSH terms, etc. Each MeSH classifier is trained independently, and thus prediction scores from different classifiers are incomparable. To address this issue, we have developed an effective score normalization procedure to improve the prediction accuracy. Results: MeSHLabeler won the first place in Task 2A of 2014 BioASQ challenge, achieving the Micro F-measure of 0.6248 for 9,040 citations provided by the BioASQ challenge. Note that this accuracy is around 9.15% higher than 0.5724, obtained by MTI. Availability and implementation: The software is available upon request. Contact: zhusf@fudan.edu.cn PMID:26072501

Evaluation of Sub Query Performance in SQL Server

NASA Astrophysics Data System (ADS)

Oktavia, Tanty; Sujarwo, Surya

2014-03-01

The paper explores several sub query methods used in a query and their impact on the query performance. The study uses experimental approach to evaluate the performance of each sub query methods combined with indexing strategy. The sub query methods consist of in, exists, relational operator and relational operator combined with top operator. The experimental shows that using relational operator combined with indexing strategy in sub query has greater performance compared with using same method without indexing strategy and also other methods. In summary, for application that emphasized on the performance of retrieving data from database, it better to use relational operator combined with indexing strategy. This study is done on Microsoft SQL Server 2012.

A method for the detection of the refractive index of irregular shape solid pigments in light absorbing liquid matrix.

PubMed

Niskanen, Ilpo; Räty, Jukka; Peiponen, Kai-Erik

2010-06-15

The immersion liquid method is powerful for the measurement of the refractive index of solid particles in a liquid matrix. However, this method applies best for cases when the liquid matrix is transparent. A problem is usually how to assess the refractive index of a pigment when it is in a colored host liquid. In this article we introduce a method, and show that by combining so-called multifunction spectrophotometer, immersion liquid method and detection of light transmission and reflection we can assess the refractive index of a pigment in a colored liquid, and also the extinction or absorption coefficient of the host liquid.

Visual feature discrimination versus compression ratio for polygonal shape descriptors

NASA Astrophysics Data System (ADS)

Heuer, Joerg; Sanahuja, Francesc; Kaup, Andre

2000-10-01

In the last decade several methods for low level indexing of visual features appeared. Most often these were evaluated with respect to their discrimination power using measures like precision and recall. Accordingly, the targeted application was indexing of visual data within databases. During the standardization process of MPEG-7 the view on indexing of visual data changed, taking also communication aspects into account where coding efficiency is important. Even if the descriptors used for indexing are small compared to the size of images, it is recognized that there can be several descriptors linked to an image, characterizing different features and regions. Beside the importance of a small memory footprint for the transmission of the descriptor and the memory footprint in a database, eventually the search and filtering can be sped up by reducing the dimensionality of the descriptor if the metric of the matching can be adjusted. Based on a polygon shape descriptor presented for MPEG-7 this paper compares the discrimination power versus memory consumption of the descriptor. Different methods based on quantization are presented and their effect on the retrieval performance are measured. Finally an optimized computation of the descriptor is presented.

Optimization of OSEM parameters in myocardial perfusion imaging reconstruction as a function of body mass index: a clinical approach*

PubMed Central

de Barros, Pietro Paolo; Metello, Luis F.; Camozzato, Tatiane Sabriela Cagol; Vieira, Domingos Manuel da Silva

2015-01-01

Objective The present study is aimed at contributing to identify the most appropriate OSEM parameters to generate myocardial perfusion imaging reconstructions with the best diagnostic quality, correlating them with patients’ body mass index. Materials and Methods The present study included 28 adult patients submitted to myocardial perfusion imaging in a public hospital. The OSEM method was utilized in the images reconstruction with six different combinations of iterations and subsets numbers. The images were analyzed by nuclear cardiology specialists taking their diagnostic value into consideration and indicating the most appropriate images in terms of diagnostic quality. Results An overall scoring analysis demonstrated that the combination of four iterations and four subsets has generated the most appropriate images in terms of diagnostic quality for all the classes of body mass index; however, the role played by the combination of six iterations and four subsets is highlighted in relation to the higher body mass index classes. Conclusion The use of optimized parameters seems to play a relevant role in the generation of images with better diagnostic quality, ensuring the diagnosis and consequential appropriate and effective treatment for the patient. PMID:26543282

[Impact of prostaglandin F2α and endothelin, pulsation index and resistance index of uterine artery blood flow on dysmenorrhea patients of cold stagnation and blood stasis syndrome with Dingkun Dan].

PubMed

Ma, Kun; Chen, Yan-Xia; Wang, Yan-Ying

2017-12-01

This research apply Dingkun Dan to treat patients with dysmenorrhea of cold stagnation and blood stasis syndrome. This study observed its effectiveness and safety of the treatment of the disease and its influence on the serum prostaglandin F2α, endothefin, pulsatility index and resistant index of uterine artery blood, to explore the possible mechanism of effect of Dingkun Dan in the treatment of dysmenorrhea and provide scientific basis for clinical application. The 75 patients with dysmenorrhea of cold stagnation and blood stasis who met the inclusion criteria, were divided into treatment group (n=37) and control group (n=38) by using random number remainder grouping method. In the treatment group patients were treated with Dingkun Dan, the other group were given Fuke Zaizao Jiaonang. Two groups have same time to take the medicine, three days prior to the menstruation for ten days. Medication for three menstrual cycles was seen as a course of treatment. To observe and compare the two groups of patients before and after treatment VAS score, syndrome integral, serum levels of prostaglandin F2α and endothelin, pulsation index and resistance index of uterine artery blood flow and related safety index changes. Finally makes statistical analysis. It has been identified that, Treatment group and control group can reduce pain symptom of dysmenorrhea patients and improve the syndromes scores, compare with control group, effect of the treatment group is more significant(P<0.01). VAS pain curative effect: the treatment group and control group total effective rate respectively were, 97.22%, 69.44%, markedly effective rate were 83.33%, 30.56%, comparison between two groups, treatment group is better than that of control group(P＜0.01). Syndromes curative effect: the treatment group and control group total effective rate respectively were 97.22%, 94.44%, markedly effective rate was 66.67%, 2.78%, respectively. The comparison between two groups, the total effective rate has no obvious difference, but markedly effective rate of treatment group is better than that of control group(P＜0.01). The treatment group can significantly reduce the patients' serum level of prostaglandin F2α(P<0.01), but no obvious difference was found in the control group before and after treatment. Both groups can significantly reduce the serum level of endothelin(P<0.01), comparison between two groups, the treatment group is more significant(P<0.01).Both treatment group and control group were significantly lower left and right pulsation index and resistance index of uterus artery blood flow(P<0.01). Between groups to compare the effect, the treatment group is more significant(P<0.01). Both treatment group and control group in the security check before and after treatment found no significant anomalies. Dingkun Dan in treating dysmenorrhea with cold stagnation and blood stasis syndrome seems to have remarkable clinical curative effect and safety, which may be achieved by significantly reducing the serum level of prostaglandin F2αand endothefin of the patients, and reducing the pulsation index and resistance index of uterine artery blood flow of the patients, to improve uterine artery condition of blood, and correcting local tissue ischemia to relieve pain. Copyright© by the Chinese Pharmaceutical Association.

Femtosecond Z-scan measurements of the nonlinear refractive index of fused silica

NASA Astrophysics Data System (ADS)

Zhang, Lin; Shi, Zhendong; Ma, Hua; Ren, Huan; Yuan, Quan; Ma, Yurong; Feng, Xiaoxuan; Chen, Bo; Yang, Yi

2018-01-01

Z-scan technology is a popular experimental technique for determining the nonlinear refractive index of the material. However, it encounters a great difficulty in measuring the weak nonlinear material like fused silica which is about two orders of magnitude below the nonlinear refractive index of most of the materials studied with the nanosecond and picosecond Z-scan methods. In this case, the change of refractive index introduced by accumulation of thermal effects cannot be neglected. In order to have a reliable measurement of the nonlinear refractive index, a metrology bench based on the femtosecond Z-scan technology is developed. The intensity modulation component and the differential measurement system are applied to guarantee the accuracy of the measuring system. Based on the femtosecond Z-scan theory, the femtosecond laser Z-scan technique is performed on fused silica, and the nonlinear refractive index of Fused silica is determined to be 9.2039×10-14esu for 800nm, 37fs pulse duration at I0=50GW/cm2 with a good repeatability of 6.7%.

Energy index decomposition methodology at the plant level

NASA Astrophysics Data System (ADS)

Kumphai, Wisit

Scope and method of study. The dissertation explores the use of a high level energy intensity index as a facility-level energy performance monitoring indicator with a goal of developing a methodology for an economically based energy performance monitoring system that incorporates production information. The performance measure closely monitors energy usage, production quantity, and product mix and determines the production efficiency as a part of an ongoing process that would enable facility managers to keep track of and, in the future, be able to predict when to perform a recommissioning process. The study focuses on the use of the index decomposition methodology and explored several high level (industry, sector, and country levels) energy utilization indexes, namely, Additive Log Mean Divisia, Multiplicative Log Mean Divisia, and Additive Refined Laspeyres. One level of index decomposition is performed. The indexes are decomposed into Intensity and Product mix effects. These indexes are tested on a flow shop brick manufacturing plant model in three different climates in the United States. The indexes obtained are analyzed by fitting an ARIMA model and testing for dependency between the two decomposed indexes. Findings and conclusions. The results concluded that the Additive Refined Laspeyres index decomposition methodology is suitable to use on a flow shop, non air conditioned production environment as an energy performance monitoring indicator. It is likely that this research can be further expanded in to predicting when to perform a recommissioning process.

Formulation and characterization of fisetin nanosuspension

NASA Astrophysics Data System (ADS)

Dzakwan, M.; Pramukantoro, G. E.; Mauludin, R.; Wikarsa, S.

2017-11-01

Fisetin (3,3,4,7-tetrahydroxyflavone) is a natural antioxidant that has shown to posses anticancer, antioxidant and anti-inflammatory properties. However, the poor solubility leads to poor bioavailability and limits its development. The aim of the study is to investigate the effect of fisetin nanosuspension using a precipitation-sonication method and additional stabilizers polysorbat 80, SLS, F68, PVP, PVA and HPMC on particle size average and the polydispersity index. The suspensions of microcrystalline FIS were prepared by a precipitation method with different proportion of stabilizers fixed. The nanosuspension produced was then characterized using Photon Correlation Spectroscopy (PCS) in term of particle size distribution, polydispersity index and morphology particle (SEM). Result showed fisetin nanosuspension were successfully prepared by anti-solvent precipitation with additional stabilizer SLS and PVA. The nanosuspension containing PVA showed smaller average particle size of 406 nm, a polydispersity index of 0.22±0.1 was obtained. The drug particles precipitated with the PVA as stabilizer were spherical in shape.

Link prediction based on local weighted paths for complex networks

NASA Astrophysics Data System (ADS)

Yao, Yabing; Zhang, Ruisheng; Yang, Fan; Yuan, Yongna; Hu, Rongjing; Zhao, Zhili

As a significant problem in complex networks, link prediction aims to find the missing and future links between two unconnected nodes by estimating the existence likelihood of potential links. It plays an important role in understanding the evolution mechanism of networks and has broad applications in practice. In order to improve prediction performance, a variety of structural similarity-based methods that rely on different topological features have been put forward. As one topological feature, the path information between node pairs is utilized to calculate the node similarity. However, many path-dependent methods neglect the different contributions of paths for a pair of nodes. In this paper, a local weighted path (LWP) index is proposed to differentiate the contributions between paths. The LWP index considers the effect of the link degrees of intermediate links and the connectivity influence of intermediate nodes on paths to quantify the path weight in the prediction procedure. The experimental results on 12 real-world networks show that the LWP index outperforms other seven prediction baselines.

Simultaneous measurement of refractive index and temperature based on intensity demodulation using matching grating method.

PubMed

Qi, Liang; Zhao, Chun-Liu; Kang, Juan; Jin, Yongxing; Wang, Jianfeng; Ye, Manping; Jin, Shangzhong

2013-07-01

A solution refractive index (SRI) and temperature simultaneous measurement sensor with intensity-demodulation system based on matching grating method were demonstrated. Long period grating written in a photonic crystal fiber (LPG-PCF), provides temperature stable and wavelength dependent optical intensity transmission. The reflective peaks of two fiber Bragg gratings (FBGs), one of which is etched then sensitive to both SRI and temperature, another (FBG2) is only sensitive to temperature, were located in the same linear range of the LPG-PCF's transmission spectrum. An identical FBG with FBG2 was chosen as a matching FBG. When environments (SRI and temperature) change, the wavelength shifts of the FBGs are translated effectively to the reflection intensity changes. By monitoring output lights of unmatching and matching paths, the SRI and temperature were deduced by a signal processing unit. Experimental results show that the simultaneous refractive index and temperature measurement system work well. The proposed sensor system is compact and suitable for in situ applications at lower cost.

Performance analysis of higher mode spoof surface plasmon polariton for terahertz sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yao, Haizi; Tu, Wanli; Zhong, Shuncong, E-mail: zhongshuncong@hotmail.com

2015-04-07

We investigated the spoof surface plasmon polaritons (SSPPs) on 1D grooved metal surface for terahertz sensing of refractive index of the filling analyte through a prism-coupling attenuated total reflection setup. From the dispersion relation analysis and the finite element method-based simulation, we revealed that the dispersion curve of SSPP got suppressed as the filling refractive index increased, which cause the coupling resonance frequency redshifting in the reflection spectrum. The simulated results for testing various refractive indexes demonstrated that the incident angle of terahertz radiation has a great effect on the performance of sensing. Smaller incident angle will result in amore » higher sensitive sensing with a narrower detection range. In the meanwhile, the higher order mode SSPP-based sensing has a higher sensitivity with a narrower detection range. The maximum sensitivity is 2.57 THz/RIU for the second-order mode sensing at 45° internal incident angle. The proposed SSPP-based method has great potential for high sensitive terahertz sensing.« less

Land cover classification of Landsat 8 satellite data based on Fuzzy Logic approach

NASA Astrophysics Data System (ADS)

Taufik, Afirah; Sakinah Syed Ahmad, Sharifah

2016-06-01

The aim of this paper is to propose a method to classify the land covers of a satellite image based on fuzzy rule-based system approach. The study uses bands in Landsat 8 and other indices, such as Normalized Difference Water Index (NDWI), Normalized difference built-up index (NDBI) and Normalized Difference Vegetation Index (NDVI) as input for the fuzzy inference system. The selected three indices represent our main three classes called water, built- up land, and vegetation. The combination of the original multispectral bands and selected indices provide more information about the image. The parameter selection of fuzzy membership is performed by using a supervised method known as ANFIS (Adaptive neuro fuzzy inference system) training. The fuzzy system is tested for the classification on the land cover image that covers Klang Valley area. The results showed that the fuzzy system approach is effective and can be explored and implemented for other areas of Landsat data.

A general method for decomposing the causes of socioeconomic inequality in health.

PubMed

Heckley, Gawain; Gerdtham, Ulf-G; Kjellsson, Gustav

2016-07-01

We introduce a general decomposition method applicable to all forms of bivariate rank dependent indices of socioeconomic inequality in health, including the concentration index. The technique is based on recentered influence function regression and requires only the application of OLS to a transformed variable with similar interpretation. Our method requires few identifying assumptions to yield valid estimates in most common empirical applications, unlike current methods favoured in the literature. Using the Swedish Twin Registry and a within twin pair fixed effects identification strategy, our new method finds no evidence of a causal effect of education on income-related health inequality. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Comparison of quantitatively analyzed dynamic area-detector CT using various mathematic methods with FDG PET/CT in management of solitary pulmonary nodules.

PubMed

Ohno, Yoshiharu; Nishio, Mizuho; Koyama, Hisanobu; Fujisawa, Yasuko; Yoshikawa, Takeshi; Matsumoto, Sumiaki; Sugimura, Kazuro

2013-06-01

The objective of our study was to prospectively compare the capability of dynamic area-detector CT analyzed with different mathematic methods and PET/CT in the management of pulmonary nodules. Fifty-two consecutive patients with 96 pulmonary nodules underwent dynamic area-detector CT, PET/CT, and microbacterial or pathologic examinations. All nodules were classified into the following groups: malignant nodules (n = 57), benign nodules with low biologic activity (n = 15), and benign nodules with high biologic activity (n = 24). On dynamic area-detector CT, the total, pulmonary arterial, and systemic arterial perfusions were calculated using the dual-input maximum slope method; perfusion was calculated using the single-input maximum slope method; and extraction fraction and blood volume (BV) were calculated using the Patlak plot method. All indexes were statistically compared among the three nodule groups. Then, receiver operating characteristic analyses were used to compare the diagnostic capabilities of the maximum standardized uptake value (SUVmax) and each perfusion parameter having a significant difference between malignant and benign nodules. Finally, the diagnostic performances of the indexes were compared by means of the McNemar test. No adverse effects were observed in this study. All indexes except extraction fraction and BV, both of which were calculated using the Patlak plot method, showed significant differences among the three groups (p < 0.05). Areas under the curve of total perfusion calculated using the dual-input method, pulmonary arterial perfusion calculated using the dual-input method, and perfusion calculated using the single-input method were significantly larger than that of SUVmax (p < 0.05). The accuracy of total perfusion (83.3%) was significantly greater than the accuracy of the other indexes: pulmonary arterial perfusion (72.9%, p < 0.05), systemic arterial perfusion calculated using the dual-input method (69.8%, p < 0.05), perfusion (66.7%, p < 0.05), and SUVmax (60.4%, p < 0.05). Dynamic area-detector CT analyzed using the dual-input maximum slope method has better potential for the diagnosis of pulmonary nodules than dynamic area-detector CT analyzed using other methods and than PET/CT.

Biotin-Avidin ELISA Detection of Grapevine Fanleaf Virus in the Vector Nematode Xiphinema index.

PubMed

Esmenjaud, D; Walter, B; Minot, J C; Voisin, R; Cornuet, P

1993-09-01

The value of biotin-avidin (B-A) ELISA for the detection of grapevine fanleaf virus (GFLV) in Xiphinema was estimated with field populations and greenhouse subpopulations. Samples consisted of increasing numbers of adults ranging from 1 to 64 in multiples of two. Tests with virus-free X. index populations reared on grapevine and fig plants as negative controls did not reveal a noticeable effect of the host plant. ELISA absorbances of virus-free X. index samples were greater than corresponding absorbances of X. pachtaicum samples. Differences occurred between two X. index field populations from GFLV-infected grapevines in Champagne and Languedoc. In most tests, 1-, 2-, 4-, and 8-nematode samples of virus-free and virus-infected populations, respectively, could not be separated. Consequently, B-A ELISA was not a reliable method for GFLV detection in samples of less than 10 X. index adults, but comparison of the absorbances obtained with increasing numbers may allow differentiation of the viral infectious potential of several populations.

A new comprehensive index for discriminating adulteration in bovine raw milk.

PubMed

Liu, Jing; Ren, Jing; Liu, Zhen-Min; Guo, Ben-Heng

2015-04-01

This paper proposes a new comprehensive index, called Q, which can effectively discriminate artificial adulterated milk from unadulterated milk. Both normal and adulterated samples of bovine raw milk were analysed by Fourier transform infrared spectroscopic instrument to measure the traditional indices of quality, including fat (FAT), protein (PRO), lactose (LAC), total solids (TS), non-fat solid (NFS), freezing point (FP) and somatic cell counts (SCC). From these traditional indices, this paper elaborates a method to build the index Q. First, correlated analysis and principle component analysis were used to select parameter pairs TS-FAT and FP-LAC as predominant variables. Second, linear-regression analysis and residual analysis are applied to determine the index Q and its discriminating ranges. The verification and two-blind trial results suggested that index Q could accurately detect milk adulteration with maltodextrin and water (as low as 1.0% of adulteration proportions), and with other nine kinds of synthetic adulterants (as low as 0.5% of adulteration proportions). Copyright © 2014 Elsevier Ltd. All rights reserved.

The use of 2D and 3D WA-BPM models to analyze total-internal-reflection-based integrated optical switches

NASA Astrophysics Data System (ADS)

Wang, Pengfei; Brambilla, Gilberto; Semenova, Yuliya; Wu, Qiang; Zheng, Jie; Farrell, Gerald

2011-08-01

The well known beam propagation method (BPM) has become one of the most useful, robust and effective numerical simulation tools for the investigation of guided-wave optics, for example integrated optical waveguides and fiber optic devices. In this paper we examine the use of the 2D and 3D wide angle-beam propagation method (WA-BPM) combined with the well known perfectly matched layer (PML) boundary conditions as a tool to analyze TIR based optical switches, in particular the relationship between light propagation and the geometrical parameters of a TIR based optical switch. To analyze the influence of the length and the width of the region in which the refractive index can be externally controlled, the 3D structure of a 2x2 TIR optical switch is firstly considered in 2D using the effective index method (EIM). Then the influence of the etching depth and the tilt angle of the reflection facet on the switch performance are investigated with a 3D model.

Parameter screening: the use of a dummy parameter to identify non-influential parameters in a global sensitivity analysis

NASA Astrophysics Data System (ADS)

Khorashadi Zadeh, Farkhondeh; Nossent, Jiri; van Griensven, Ann; Bauwens, Willy

2017-04-01

Parameter estimation is a major concern in hydrological modeling, which may limit the use of complex simulators with a large number of parameters. To support the selection of parameters to include in or exclude from the calibration process, Global Sensitivity Analysis (GSA) is widely applied in modeling practices. Based on the results of GSA, the influential and the non-influential parameters are identified (i.e. parameters screening). Nevertheless, the choice of the screening threshold below which parameters are considered non-influential is a critical issue, which has recently received more attention in GSA literature. In theory, the sensitivity index of a non-influential parameter has a value of zero. However, since numerical approximations, rather than analytical solutions, are utilized in GSA methods to calculate the sensitivity indices, small but non-zero indices may be obtained for the indices of non-influential parameters. In order to assess the threshold that identifies non-influential parameters in GSA methods, we propose to calculate the sensitivity index of a "dummy parameter". This dummy parameter has no influence on the model output, but will have a non-zero sensitivity index, representing the error due to the numerical approximation. Hence, the parameters whose indices are above the sensitivity index of the dummy parameter can be classified as influential, whereas the parameters whose indices are below this index are within the range of the numerical error and should be considered as non-influential. To demonstrated the effectiveness of the proposed "dummy parameter approach", 26 parameters of a Soil and Water Assessment Tool (SWAT) model are selected to be analyzed and screened, using the variance-based Sobol' and moment-independent PAWN methods. The sensitivity index of the dummy parameter is calculated from sampled data, without changing the model equations. Moreover, the calculation does not even require additional model evaluations for the Sobol' method. A formal statistical test validates these parameter screening results. Based on the dummy parameter screening, 11 model parameters are identified as influential. Therefore, it can be denoted that the "dummy parameter approach" can facilitate the parameter screening process and provide guidance for GSA users to define a screening-threshold, with only limited additional resources. Key words: Parameter screening, Global sensitivity analysis, Dummy parameter, Variance-based method, Moment-independent method

Image fusion based on Bandelet and sparse representation

NASA Astrophysics Data System (ADS)

Zhang, Jiuxing; Zhang, Wei; Li, Xuzhi

2018-04-01

Bandelet transform could acquire geometric regular direction and geometric flow, sparse representation could represent signals with as little as possible atoms on over-complete dictionary, both of which could be used to image fusion. Therefore, a new fusion method is proposed based on Bandelet and Sparse Representation, to fuse Bandelet coefficients of multi-source images and obtain high quality fusion effects. The test are performed on remote sensing images and simulated multi-focus images, experimental results show that the performance of new method is better than tested methods according to objective evaluation indexes and subjective visual effects.

Predicting chaos in memristive oscillator via harmonic balance method.

PubMed

Wang, Xin; Li, Chuandong; Huang, Tingwen; Duan, Shukai

2012-12-01

This paper studies the possible chaotic behaviors in a memristive oscillator with cubic nonlinearities via harmonic balance method which is also called the method of describing function. This method was proposed to detect chaos in classical Chua's circuit. We first transform the considered memristive oscillator system into Lur'e model and present the prediction of the existence of chaotic behaviors. To ensure the prediction result is correct, the distortion index is also measured. Numerical simulations are presented to show the effectiveness of theoretical results.

Dual-modality arterial pulse monitoring system for continuous blood pressure measurement.

PubMed

Wen-Xuan Dai; Yuan-Ting Zhang; Jing Liu; Xiao-Rong Ding; Ni Zhao

2016-08-01

Accurate and ambulatory measurement of blood pressure (BP) is essential for efficient diagnosis, management and prevention of cardiovascular diseases (CVDs). However, traditional cuff-based BP measurement methods provide only intermittent BP readings and can cause discomfort with the occlusive cuff. Although pulse transit time (PTT) method is promising for cuffless and continuous BP measurement, its pervasive use is restricted by its limited accuracy and requirement of placing sensors on multiple body sites. To tackle these issues, we propose a novel dual-modality arterial pulse monitoring system for continuous blood pressure measurement, which simultaneously records the pressure and photoplethysmography (PPG) signals of radial artery. The obtained signals can be used to generate a pressure-volume curve, from which the elasticity index (EI) and viscosity index (VI) can be extracted. Experiments were carried out among 7 healthy subjects with their PPG, ECG, arterial pressure wave and reference BP collected to examine the effectiveness of the proposed indexes. The results of this study demonstrate that a linear regression model combining EI and VI has significantly higher BP tracking correlation coefficient as compared to the PTT method. This suggests that the proposed system and method can potentially be used for convenient and continuous blood pressure estimation with higher accuracy.

[Application of temporomandibular joint dics reduction in the operation of condylar sagittal fracture].

PubMed

Wenli, Zeng; Wuchao, Zhou; Jingkun, Zhang; Yisen, Shao; Weihong, Xi

2017-10-01

To explore the selection of temporomandibular joint (TMJ) disc reduction and fixation methods in condylar sagittal fracture surgery. A total of 36 patients with condylar fractures were chosen. The follow-up period was more 6 months. All 36 cases of condylar sagittal fracture were fixed with long screw. In the operation, the displaced joint disc was repositioned and fixed. The fixed method included direct suture (22 cases) and anchorage (14 cases). Clinical followups were performed before surgery and 1 month, 3 months, 6 months and 1 year after surgery. Clinicians recorded data related to the Fricton craniomandibular index (CMI) and evaluated the postoperative joint function during followup before surgery and 6 months after surgery. In both groups, function of TMJ significantly improved after surgery. The CMI decreased from 0.213±0.162 and 0.273±0.154 to 0.059±0.072 and 0.064±0.068 (P<0.05), respectively. No statistical difference was observed between the two groups in palpation index (PI), dysfunction index (DI) and CMI (P>0.05) before or after surgery. Both methods could effectively improve the dysfunction of the TMJ caused by trauma. The selection of joint disc reduction and fixation methods is based on the displacement and damage degree of the joint disc.

One-dimensional transient radiative transfer by lattice Boltzmann method.

PubMed

Zhang, Yong; Yi, Hongliang; Tan, Heping

2013-10-21

The lattice Boltzmann method (LBM) is extended to solve transient radiative transfer in one-dimensional slab containing scattering media subjected to a collimated short laser irradiation. By using a fully implicit backward differencing scheme to discretize the transient term in the radiative transfer equation, a new type of lattice structure is devised. The accuracy and computational efficiency of this algorithm are examined firstly. Afterwards, effects of the medium properties such as the extinction coefficient, the scattering albedo and the anisotropy factor, and the shapes of laser pulse on time-resolved signals of transmittance and reflectance are investigated. Results of the present method are found to compare very well with the data from the literature. For an oblique incidence, the LBM results in this paper are compared with those by Monte Carlo method generated by ourselves. In addition, transient radiative transfer in a two-Layer inhomogeneous media subjected to a short square pulse irradiation is investigated. At last, the LBM is further extended to study the transient radiative transfer in homogeneous medium with a refractive index discontinuity irradiated by the short pulse laser. Several trends on the time-resolved signals different from those for refractive index of 1 (i.e. refractive-index-matched boundary) are observed and analysed.

A temperature and vegetation adjusted NTL urban index for urban area mapping and analysis

NASA Astrophysics Data System (ADS)

Zhang, Xiya; Li, Peijun

2018-01-01

Accurate and timely information regarding the extent and spatial distribution of urban areas on regional and global scales is crucially important for both scientific and policy-making communities. Stable nighttime light (NTL) data from the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provides a unique proxy of human settlement and activity, which has been used in the mapping and analysis of urban areas and urbanization dynamics. However, blooming and saturation effects of DMSP/OLS NTL data are two unresolved problems in regional urban area mapping and analysis. This study proposed a new urban index termed the Temperature and Vegetation Adjusted NTL Urban Index (TVANUI). It is intended to reduce blooming and saturation effects and to enhance urban features by combining DMSP/OLS NTL data with Normalized Difference Vegetation Index (NDVI) and land surface temperature (LST) data from the Moderate Resolution Imaging Spectroradiometer onboard the Terra satellite. The proposed index was evaluated in two study areas by comparison with established urban indices. The results demonstrated the proposed TVANUI was effective in enhancing the variation of DMSP/OLS light in urban areas and in reducing blooming and saturation effects, showing better performance than three established urban indices. The TVANUI also significantly outperformed the established urban indices in urban area mapping using both the global-fixed threshold and the local-optimal threshold methods. Thus, the proposed TVANUI provides a useful variable for urban area mapping and analysis on regional scale, as well as for urbanization dynamics using time-series DMSP/OLS and related satellite data.

Long-Term Effects of the Realfit Intervention on Self-Esteem and Food Craving

ERIC Educational Resources Information Center

Bartelink, Nina H. M.; Mulkens, Sandra; Mujakovic, Suhreta; Jansen, Maria W. J.

2018-01-01

Background: RealFit is a 13-week weight-reduction programme for adolescents. This study investigated the programme's long-term effectiveness regarding the psychological outcomes of self-esteem and food craving. Methods: The study had a quasi-experimental design. Body mass index, self-esteem and food craving were assessed at baseline (T[subscript…

Timing Effects on Divorce: 20th Century Experience in the United States

ERIC Educational Resources Information Center

Schoen, Robert; Canudas-Romo, Vladimir

2006-01-01

Period divorce measures can misrepresent the underlying behavior of birth cohorts as changes in cohort timing produce changes in period probabilities of divorce. Building on methods used to adjust period fertility and marriage measures, we adjust U.S. period divorce rates for timing effects, calculating a timing index for every year between 1910…

Nondestructive measurement of the refractive index distribution of a glass molded lens by two-wavelength wavefronts.

PubMed

Sugimoto, Tomohiro

2016-10-01

This paper presents a nondestructive and non-exact-index-matching method for measuring the refractive index distribution of a glass molded lens with high refractivity. The method measures two-wavelength wavefronts of a test lens immersed in a liquid with a refractive index dispersion different from that of the test lens and calculates the refractive index distribution by eliminating the refractive index distribution error caused by the shape error of the test lens. The estimated uncertainties of the refractive index distributions of test lenses with n_d≈1.77 and n_d≈1.85 were 1.9×10^-5  RMS and 2.4×10^-5  RMS, respectively. I validated the proposed method by evaluating the agreement between the estimated uncertainties and experimental values.

[Assessment of ecological environment effects of coastal development in Hebei Province, China].

PubMed

Cui, Li-Tuo; Li, Zhi-Wei

2014-07-01

Through the analysis of the development activities and the ecological environment in coastal of Hebei Province, China, an index system for evaluating the ecological environment effect, composed of 28 indices, was set up by the pressure, state and response subsystems. Using the comprehensive index evaluation method, the integrated effects of ecological environment index (EI) was calculated and its grading criterion was founded. The results showed that the ecological environment effect of Hebei Province coastal development varied from being relatively small, normal and then relatively large from 1984 to 2010, and its acceptance degree evolved from being acceptable to being unacceptable. Because the resource and environment pressures caused by coastal development were serious and a delay existed in the state relative to the response, the improvement of various measures in the response subsystem did not show a positive effect on the state, and the environmental quality of ocean showed a degrading trend. Due to the differences in coastal development pattern and strength, the ecological environment effect of development activities showed some spatial differences. The ecological environment effect of Qinhuangdao coastal development was the minimum, followed by Cangzhou and Tangshan. Cangzhou and Tangshan had reached unacceptable levels and needed to further strengthen the restoration and protection of ecological environment.

Can Network Linkage Effects Determine Return? Evidence from Chinese Stock Market

PubMed Central

Qiao, Haishu; Xia, Yue; Li, Ying

2016-01-01

This study used the dynamic conditional correlations (DCC) method to identify the linkage effects of Chinese stock market, and further detected the influence of network linkage effects on magnitude of security returns across different industries. Applying two physics-derived techniques, the minimum spanning tree and the hierarchical tree, we analyzed the stock interdependence within the network of the China Securities Index (CSI) industry index basket. We observed that that obvious linkage effects existed among stock networks. CII and CCE, CAG and ITH as well as COU, CHA and REI were confirmed as the core nodes in the three different networks respectively. We also investigated the stability of linkage effects by estimating the mean correlations and mean distances, as well as the normalized tree length of these indices. In addition, using the GMM model approach, we found inter-node influence within the stock network had a pronounced effect on stock returns. Our results generally suggested that there appeared to be greater clustering effect among the indexes belonging to related industrial sectors than those of diverse sectors, and network comovement was significantly affected by impactive financial events in the reality. Besides, stocks that were more central within the network of stock market usually had higher returns for compensation because they endured greater exposure to correlation risk. PMID:27257816

Can Network Linkage Effects Determine Return? Evidence from Chinese Stock Market.

PubMed

Qiao, Haishu; Xia, Yue; Li, Ying

2016-01-01

This study used the dynamic conditional correlations (DCC) method to identify the linkage effects of Chinese stock market, and further detected the influence of network linkage effects on magnitude of security returns across different industries. Applying two physics-derived techniques, the minimum spanning tree and the hierarchical tree, we analyzed the stock interdependence within the network of the China Securities Index (CSI) industry index basket. We observed that that obvious linkage effects existed among stock networks. CII and CCE, CAG and ITH as well as COU, CHA and REI were confirmed as the core nodes in the three different networks respectively. We also investigated the stability of linkage effects by estimating the mean correlations and mean distances, as well as the normalized tree length of these indices. In addition, using the GMM model approach, we found inter-node influence within the stock network had a pronounced effect on stock returns. Our results generally suggested that there appeared to be greater clustering effect among the indexes belonging to related industrial sectors than those of diverse sectors, and network comovement was significantly affected by impactive financial events in the reality. Besides, stocks that were more central within the network of stock market usually had higher returns for compensation because they endured greater exposure to correlation risk.

Isolation and characterization of phosphate-solubilizing bacteria from seagrass rhizosphere soil

NASA Astrophysics Data System (ADS)

Ghosh, Upasana; Subhashini, Ponnambalam; Dilipan, Elangovan; Raja, Subramanian; Thangaradjou, Thirunavukarassu; Kannan, Lakshmanan

2012-03-01

Phosphate-solubilizing bacterial strains (6 Nos.) were isolated from the rhizosphere soils of two seagrasses ( Halophila ovalis (R. Br.) Hook and Halodule pinifolia (Miki) Hartog) in the Vellar estuary. Experimental studies found that the strain PSSG6 was effective in phosphate solubilization with Phosphate Solubilization efficiency index E = 375 ± 8.54, followed by the strain PSSG5 with Phosphate Solubilization efficiency index E = 275 ± 27.3. Of the 6 strains isolated, the strains PSSG4 and PSSG5 belonged to the genus Bacillus, and PSSG1, PSSG2 and PSSG3 were identified as Citrobacter sp., Shigella sp., and Klebsiella sp., respectively, by conventional method, and PSSG6 was identified as Bacillus circulans using conventional and molecular methods.

RATIONAL DETERMINATION METHOD OF PROBABLE FREEZING INDEX FOR n-YEARS CONSIDERING THE REGIONAL CHARACTERISTICS

NASA Astrophysics Data System (ADS)

Kawabata, Shinichiro; Hayashi, Keiji; Kameyama, Shuichi

This paper investigates a method for ob taining the probable freezing index for n -years from past frostaction damage and meteorological data. From investigati on of Japanese cold winter data from the areas of Hokkaido, Tohoku and south of Tohoku, it was found that the extent of cold winter had regularity by location south or north. Also, after obtaining return periods of cold winters by area, obvious regional characteristics were found. Mild winters are rare in Hokkaido. However, it was clarified that when Hokkaido had cold winters, its size increased. It wa s effective to determine the probable freezing indices as 20-, 15- and 10-year return periods for Hokkaido, Tohoku and south of Tohoku, respectively.

Translation and validation of the Rhinosinusitis Disability Index for use in Nigeria.

PubMed

Asoegwu, C N; Nwawolo, C C; Okubadejo, N U

2017-07-01

The Rhinosinusitis Disability Index (RSDI) is a validated and reliable measure of severity of chronic rhinosinusitis. The objective of this study was to translate and validate the instrument for use in Nigeria. This is a methodological study. 71 patients with chronic rhinosinusitis attending two Otolaryngology clinics in Lagos, Nigeria. Using standardized methods and trained translators, the RSDI was translated to vernacular (Yoruba language) and back-translated to culturally appropriate English. Data analysis comprised of assessment of the item quality, content validity and internal consistency of the back-translated Rhinosinusitis Disability Index (bRSDI), and correlation to the original RSDI. Content validity (floor and ceiling effects) showed 0% floor and ceiling effects for the total scores, 0% ceiling effects for all domains and floor effect for physical domain, and 9.9 and 8.5% floor effects for functional and emotional domains, respectively. The mean item-own correlation for physical domain was 0.54 ± 0.08, 0.72 ± 0.08 for functional domain and 0.74 ± 0.07 for emotional domain. All domain item-own correlations were higher than item-other domain correlations. The total Cronbach's alpha was 0.936 and was higher than 0.70 for all the domains representing good internal consistency. Pearson correlation analysis showed strong correlation of RSDI to bRSDI (total score 0.881; p = 0.000, and domain subscores-physical: 0.788; p = 0.000, functional: 0.830; p = 0.000, and emotional: 0.888; p = 0.000). The back-translated Rhinosinusitis Disability Index shows good face and content validity with good internal consistency while correlating linearly and significantly with the original Rhinosinusitis Disability Index and is recommended for use in Nigeria.

Towards the Application of Fuzzy Logic for Developing a Novel Indoor Air Quality Index (FIAQI).

PubMed

Javid, Allahbakhsh; Hamedian, Amir Abbas; Gharibi, Hamed; Sowlat, Mohammad Hossein

2016-02-01

In the past few decades, Indoor Air Pollution (IAP) has become a primary concern to the point. It is increasingly believed to be of equal or greater importance to human health compared to ambient air. However, due to the lack of comprehensive indices for the integrated assessment of indoor air quality (IAQ), we aimed to develop a novel, Fuzzy-Based Indoor Air Quality Index (FIAQI) to bridge the existing gap in this area. We based our index on fuzzy logic, which enables us to overcome the limitations of traditional methods applied to develop environmental quality indices. Fifteen parameters, including the criteria air pollutants, volatile organic compounds, and bioaerosols were included in the FIAQI due mainly to their significant health effects. Weighting factors were assigned to the parameters based on the medical evidence available in the literature on their health effects. The final FIAQI consisted of 108 rules. In order to demonstrate the performance of the index, data were intentionally generated to cover a variety of quality levels. In addition, a sensitivity analysis was conducted to assess the validity of the index. The FIAQI tends to be a comprehensive tool to classify IAQ and produce accurate results. It seems useful and reliable to be considered by authorities to assess IAQ environments.

Equity in Pharmaceutical Pricing and Reimbursement: Crossing the Income Divide in Asia Pacific.

PubMed

Daems, Rutger; Maes, Edith; Glaetzer, Christoph

2013-05-01

The article takes a three-dimensional approach (triangulation) in defining international pricing policy for pharmaceuticals using cost-effectiveness analysis (CEA), willingness-to-pay (WTP) analysis, and ability-to-pay (ATP) analysis. It attempts to find a balance between the various economic methods of which some focus on effectiveness while others are geared toward incorporating equity in the equation. A critical review of the first two established economic methods and their ability to evaluate not only "efficacy" but also "fairness" in pricing decisions identifies a gap in the latter. Therefore, a third analytic method is presented that measures the ATP based on a country's score in the human development index of the United Nations Development Program for 120 countries. This approach allows practicing differential pricing among and within countries. To refine this equity-driven pricing concept, two additional parameters can be added to the model: the Oxford "Multidimensional Poverty Index" and the "Out-of-Pocket" or "Self Pay" health expenditure as reported by the World Bank. There is no hierarchy between the above three pricing methods. Because one method provides further insight into the other, however, it is recommended to start with CEA followed by WTP analysis. These types of analysis are closely linked in that the first provides the CE ratio for the compound investigated and the other sets the anticipated ceiling threshold of the payer's WTP (in a particular country). The ATP method provides a supplementary "equity" check and facilitates the process of equity-based differential pricing. A third method should be used in conjunction with the standard CEA and WTP analysis that measures the ATP with the human development index as yardstick to provide sustainable and equitable access to medicines. We recommend that ATP analysis becomes an additional practice in policy decision making and in defining international pricing strategies for pharmaceuticals. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

A hybrid 3D spatial access method based on quadtrees and R-trees for globe data

NASA Astrophysics Data System (ADS)

Gong, Jun; Ke, Shengnan; Li, Xiaomin; Qi, Shuhua

2009-10-01

3D spatial access method for globe data is very crucial technique for virtual earth. This paper presents a brand-new maintenance method to index 3d objects distributed on the whole surface of the earth, which integrates the 1:1,000,000- scale topographic map tiles, Quad-tree and R-tree. Furthermore, when traditional methods are extended into 3d space, the performance of spatial index deteriorates badly, for example 3D R-tree. In order to effectively solve this difficult problem, a new algorithm of dynamic R-tree is put forward, which includes two sub-procedures, namely node-choosing and node-split. In the node-choosing algorithm, a new strategy is adopted, not like the traditional mode which is from top to bottom, but firstly from bottom to top then from top to bottom. This strategy can effectively solve the negative influence of node overlap. In the node-split algorithm, 2-to-3 split mode substitutes the traditional 1-to-2 mode, which can better concern the shape and size of nodes. Because of the rational tree shape, this R-tree method can easily integrate the concept of LOD. Therefore, it will be later implemented in commercial DBMS and adopted in time-crucial 3d GIS system.

Comparative analysis of water quality and toxicity assessment methods for urban highway runoff.

PubMed

Chen, Rui-Hong; Li, Fei-Peng; Zhang, Hai-Ping; Jiang, Yue; Mao, Ling-Chen; Wu, Ling-Ling; Chen, Ling

2016-05-15

In this study, comparative analyses of highway runoff samples obtained from seventeen storm events have been conducted between the traditional water quality assessment method and biotoxicity tests, using zebrafish (Danio rerio) embryos and luminous bacteria (Vibrio qinghaiensis. Q67) to provide useful information for ecotoxicity assessment of urban highway runoff. The study results showed that the Nemerow pollution index based on US EPA recommended Criteria Maximum Concentrations (CMC) (as traditional water quality assessment method) had no significant correlation with luminous bacteria acute toxicity test results, while significant correlation has been observed with two indicators of 72 hpf (hours post fertilization) hour hatching rate and 96 hpf abnormality rate from the toxicity test with zebrafish embryos. It is therefore concluded that the level of mixture toxicity of highway runoff could not be adequately measured by the Nemerow assessment method. Moreover, the key pollutants identified from the water quality assessment and from the biotoxicity evaluation were not consistent. For biotoxic effect evaluation of highway runoff, three indexes were found to be sensitive, i.e. 24 hpf lethality and 96 hpf abnormality of zebrafish embryos, as well as the inhibition rate for luminous bacteria Q67. It is therefore recommended that these indexes could be incorporated into the traditional Nemerow method to provide a more reasonable evaluation of the highway runoff quality and ecotoxicity. Copyright © 2016 Elsevier B.V. All rights reserved.

Introductory Talk: Adding Up Chemicals: Component-Based Risk Assessment of Chemical Mixturesand Primary Talk: Grouping Chemicals for Assessment and Conducting Assessments with the Hazard Index and Related Methods

EPA Science Inventory

Dr. Simmons will provide a concise overview of established and emerging methods to group chemicals for component-based mixture risk assessments. This will be followed by introduction to several important component-based methods, the Hazard Index, Target Organ Hazard Index, Multi...

Permutation auto-mutual information of electroencephalogram in anesthesia

NASA Astrophysics Data System (ADS)

Liang, Zhenhu; Wang, Yinghua; Ouyang, Gaoxiang; Voss, Logan J.; Sleigh, Jamie W.; Li, Xiaoli

2013-04-01

Objective. The dynamic change of brain activity in anesthesia is an interesting topic for clinical doctors and drug designers. To explore the dynamical features of brain activity in anesthesia, a permutation auto-mutual information (PAMI) method is proposed to measure the information coupling of electroencephalogram (EEG) time series obtained in anesthesia. Approach. The PAMI is developed and applied on EEG data collected from 19 patients under sevoflurane anesthesia. The results are compared with the traditional auto-mutual information (AMI), SynchFastSlow (SFS, derived from the BIS index), permutation entropy (PE), composite PE (CPE), response entropy (RE) and state entropy (SE). Performance of all indices is assessed by pharmacokinetic/pharmacodynamic (PK/PD) modeling and prediction probability. Main results. The PK/PD modeling and prediction probability analysis show that the PAMI index correlates closely with the anesthetic effect. The coefficient of determination R2 between PAMI values and the sevoflurane effect site concentrations, and the prediction probability Pk are higher in comparison with other indices. The information coupling in EEG series can be applied to indicate the effect of the anesthetic drug sevoflurane on the brain activity as well as other indices. The PAMI of the EEG signals is suggested as a new index to track drug concentration change. Significance. The PAMI is a useful index for analyzing the EEG dynamics during general anesthesia.

A novel technique to solve nonlinear higher-index Hessenberg differential-algebraic equations by Adomian decomposition method.

PubMed

Benhammouda, Brahim

2016-01-01

Since 1980, the Adomian decomposition method (ADM) has been extensively used as a simple powerful tool that applies directly to solve different kinds of nonlinear equations including functional, differential, integro-differential and algebraic equations. However, for differential-algebraic equations (DAEs) the ADM is applied only in four earlier works. There, the DAEs are first pre-processed by some transformations like index reductions before applying the ADM. The drawback of such transformations is that they can involve complex algorithms, can be computationally expensive and may lead to non-physical solutions. The purpose of this paper is to propose a novel technique that applies the ADM directly to solve a class of nonlinear higher-index Hessenberg DAEs systems efficiently. The main advantage of this technique is that; firstly it avoids complex transformations like index reductions and leads to a simple general algorithm. Secondly, it reduces the computational work by solving only linear algebraic systems with a constant coefficient matrix at each iteration, except for the first iteration where the algebraic system is nonlinear (if the DAE is nonlinear with respect to the algebraic variable). To demonstrate the effectiveness of the proposed technique, we apply it to a nonlinear index-three Hessenberg DAEs system with nonlinear algebraic constraints. This technique is straightforward and can be programmed in Maple or Mathematica to simulate real application problems.

Which Propensity Score Method Best Reduces Confounder Imbalance? An Example From a Retrospective Evaluation of a Childhood Obesity Intervention.

PubMed

Schroeder, Krista; Jia, Haomiao; Smaldone, Arlene

Propensity score (PS) methods are increasingly being employed by researchers to reduce bias arising from confounder imbalance when using observational data to examine intervention effects. The purpose of this study was to examine PS theory and methodology and compare application of three PS methods (matching, stratification, weighting) to determine which best improves confounder balance. Baseline characteristics of a sample of 20,518 school-aged children with severe obesity (of whom 1,054 received an obesity intervention) were assessed prior to PS application. Three PS methods were then applied to the data to determine which showed the greatest improvement in confounder balance between the intervention and control group. The effect of each PS method on the outcome variable-body mass index percentile change at one year-was also examined. SAS 9.4 and Comprehensive Meta-analysis statistical software were used for analyses. Prior to PS adjustment, the intervention and control groups differed significantly on seven of 11 potential confounders. PS matching removed all differences. PS stratification and weighting both removed one difference but created two new differences. Sensitivity analyses did not change these results. Body mass index percentile at 1 year decreased in both groups. The size of the decrease was smaller in the intervention group, and the estimate of the decrease varied by PS method. Selection of a PS method should be guided by insight from statistical theory and simulation experiments, in addition to observed improvement in confounder balance. For this data set, PS matching worked best to correct confounder imbalance. Because each method varied in correcting confounder imbalance, we recommend that multiple PS methods be compared for ability to improve confounder balance before implementation in evaluating treatment effects in observational data.

Impact of dynamic distribution of floc particles on flocculation effect.

PubMed

Nan, Jun; He, Weipeng; Song, Xinin; Li, Guibai

2009-01-01

Polyaluminum chloride (PAC) was used as coagulant and suspended particles in kaolin water. Online instruments including turbidimeter and particle counter were used to monitor the flocculation process. An evaluation model for demonstrating the impact on the flocculation effect was established based on the multiple linear regression analysis method. The parameter of the index weight of channels quantitatively described how the variation of floc particle population in different size ranges cause the decrement of turbidity. The study showed that the floc particles in different size ranges contributed differently to the decrease of turbidity and that the index weight of channel could excellently indicate the impact degree of floc particles dynamic distribution on flocculation effect. Therefore, the parameter may significantly benefit the development of coagulation and sedimentation techniques as well as the optimal coagulant selection.

Aging effect of AlF3 coatings for 193 nm lithography

NASA Astrophysics Data System (ADS)

Zhao, Jia; Wang, Lin; Zhang, Weili; Yi, Kui; Shao, Jianda

2018-02-01

As important part of components for 193 nm lithography, AlF3 coatings deposited by resistive heating method acquire advantages like lower optical loss and higher laser damage threshold, but they also possess some disadvantages like worse stability, which is what aging effect focuses on. AlF3 single-layer coatings were deposited; optical property, surface morphology and roughness, and composition were characterized in different periods. Owing to aging effect, refractive index and extinction coefficient increased; larger and larger roughness caused more and more scattering loss, which was in the same order with absorption at 193.4 nm and part of optical loss; from composition analysis, proportional substitution of AlF3 by alumina may account for changes in refractive index as well as absorption.

Machine aided indexing from natural language text

NASA Technical Reports Server (NTRS)

Silvester, June P.; Genuardi, Michael T.; Klingbiel, Paul H.

1993-01-01

The NASA Lexical Dictionary (NLD) Machine Aided Indexing (MAI) system was designed to (1) reuse the indexing of the Defense Technical Information Center (DTIC); (2) reuse the indexing of the Department of Energy (DOE); and (3) reduce the time required for original indexing. This was done by automatically generating appropriate NASA thesaurus terms from either the other agency's index terms, or, for original indexing, from document titles and abstracts. The NASA STI Program staff devised two different ways to generate thesaurus terms from text. The first group of programs identified noun phrases by a parsing method that allowed for conjunctions and certain prepositions, on the assumption that indexable concepts are found in such phrases. Results were not always satisfactory, and it was noted that indexable concepts often occurred outside of noun phrases. The first method also proved to be too slow for the ultimate goal of interactive (online) MAI. The second group of programs used the knowledge base (KB), word proximity, and frequency of word and phrase occurrence to identify indexable concepts. Both methods are described and illustrated. Online MAI has been achieved, as well as several spinoff benefits, which are also described.

Predictability of machine learning techniques to forecast the trends of market index prices: Hypothesis testing for the Korean stock markets.

PubMed

Pyo, Sujin; Lee, Jaewook; Cha, Mincheol; Jang, Huisu

2017-01-01

The prediction of the trends of stocks and index prices is one of the important issues to market participants. Investors have set trading or fiscal strategies based on the trends, and considerable research in various academic fields has been studied to forecast financial markets. This study predicts the trends of the Korea Composite Stock Price Index 200 (KOSPI 200) prices using nonparametric machine learning models: artificial neural network, support vector machines with polynomial and radial basis function kernels. In addition, this study states controversial issues and tests hypotheses about the issues. Accordingly, our results are inconsistent with those of the precedent research, which are generally considered to have high prediction performance. Moreover, Google Trends proved that they are not effective factors in predicting the KOSPI 200 index prices in our frameworks. Furthermore, the ensemble methods did not improve the accuracy of the prediction.

[Measurement and analysis on complex refraction indices of pear pollen in infrared band].

PubMed

Li, Le; Hu, Yi-hua; Gu, You-lin; Chen, Wei; Zhao, Yi-zheng; Chen, Shan-jing

2015-01-01

Pollen is an important part of bioaerosols, and its complex refractive index is a crucial parameter for study on optical characteristics and detection, identification of bioaerosols. The reflection spectra of pear pollen within the 2. 5 - 15µm waveband were measured by squash method. Based on the measured data, the complex refractive index of pear pollen within the wave-band of 2. 5 to 15 µm was calculated by using Kramers-Kroning (K-K) relation, and calculation deviation about incident angle and different reflectivities at high and low frequencies.were analyzed. The results indicate that 18 degrees angle of incidence and different reflectivities at high and low frequencies have little effect on the results, and it is practicable to calculate the complex refractive index of pollen based on its reflection spectral data. The data of complex refractive index of pollen have some reference value for optical characteristics of pollen, detection and identification of bioaerosols.

Predictability of machine learning techniques to forecast the trends of market index prices: Hypothesis testing for the Korean stock markets

PubMed Central

Pyo, Sujin; Lee, Jaewook; Cha, Mincheol

2017-01-01

The prediction of the trends of stocks and index prices is one of the important issues to market participants. Investors have set trading or fiscal strategies based on the trends, and considerable research in various academic fields has been studied to forecast financial markets. This study predicts the trends of the Korea Composite Stock Price Index 200 (KOSPI 200) prices using nonparametric machine learning models: artificial neural network, support vector machines with polynomial and radial basis function kernels. In addition, this study states controversial issues and tests hypotheses about the issues. Accordingly, our results are inconsistent with those of the precedent research, which are generally considered to have high prediction performance. Moreover, Google Trends proved that they are not effective factors in predicting the KOSPI 200 index prices in our frameworks. Furthermore, the ensemble methods did not improve the accuracy of the prediction. PMID:29136004

Bayesian assessment of uncertainty in aerosol size distributions and index of refraction retrieved from multiwavelength lidar measurements.

PubMed

Herman, Benjamin R; Gross, Barry; Moshary, Fred; Ahmed, Samir

2008-04-01

We investigate the assessment of uncertainty in the inference of aerosol size distributions from backscatter and extinction measurements that can be obtained from a modern elastic/Raman lidar system with a Nd:YAG laser transmitter. To calculate the uncertainty, an analytic formula for the correlated probability density function (PDF) describing the error for an optical coefficient ratio is derived based on a normally distributed fractional error in the optical coefficients. Assuming a monomodal lognormal particle size distribution of spherical, homogeneous particles with a known index of refraction, we compare the assessment of uncertainty using a more conventional forward Monte Carlo method with that obtained from a Bayesian posterior PDF assuming a uniform prior PDF and show that substantial differences between the two methods exist. In addition, we use the posterior PDF formalism, which was extended to include an unknown refractive index, to find credible sets for a variety of optical measurement scenarios. We find the uncertainty is greatly reduced with the addition of suitable extinction measurements in contrast to the inclusion of extra backscatter coefficients, which we show to have a minimal effect and strengthens similar observations based on numerical regularization methods.

Primary School Children's Health Behaviors, Attitudes, and Body Mass Index After a 10-Week Lifestyle Intervention With Follow-Up.

PubMed

Brown, Elise C; Buchan, Duncan S; Drignei, Dorin; Wyatt, Frank B; Kilgore, Lon; Cavana, Jonathan; Baker, Julien S

2018-01-01

Background: Given the current global child obesity epidemic, testing the effectiveness of interventions in reducing obesity and its influencers is paramount. The purpose of this study was to determine immediate and long-term changes in body mass index and psychosocial variables following a 10-week lifestyle intervention. Methods: Seven hundred and seventy participants (8.75 ± 0.98 years of age, 379 boys and 391 girls) took part in the study. Participants had height, weight, and psychosocial questionnaires assessed at pre- and post-control, pre- and post-intervention, and 6-months post-intervention. Participants completed a weekly 10-week intervention consisting of healthy eating and physical activity education, physical activity, parental involvement, and behavior change techniques. Regression models were fit with correlated errors where the correlation occurred only between time points, not between subjects, and the nesting effects of school and area deprivation were controlled. Results: Regression models revealed a significant decrease in body mass index from pre- to post-intervention of 0.8512 kg/m 2 ( P = 0.0182). No Changes in body mass index occurred from post-intervention to 6-month follow-up ( P = 0.5446). The psychosocial variables did not significantly change. Conclusions: This lifestyle intervention may be an effective means for improving body mass index in primary school children in the short-term if the duration of the intervention is increased, but these changes may not be sustained without on-going support.

Plasma exogenous creatinine clearance in clinically healthy cats: comparison with urinary exogenous creatinine clearance, tentative reference intervals and indexation to bodyweight.

PubMed

Reynolds, B S; Massal, M R; Nguyen, P; Grégoire, L L; Périgaud, A E; Concordet, D; Biourge, V; Lefebvre, H P

2014-10-01

Glomerular filtration rate (GFR) is considered to be the best indicator of overall kidney function. The major objectives of this study were to compare plasma exogenous creatinine clearance (PECC) with a reference method, to establish reference intervals (RIs) for PECC and to assess the effects of indexation of GFR to bodyweight (BW) in cats. PECC was compared with urinary clearance of exogenous creatinine (UECC) in six clinically healthy domestic shorthair cats (experiment 1). Tentative RIs were determined according to current guidelines and the effects of indexation to BW and of covariables on GFR were assessed in 43 clinically healthy cats of various breeds (experiment 2). PECC was 15% higher than UECC (P <0.01), but the two estimates were strongly correlated (r(2)=0.97, P = 0.001). RIs for PECC were 6.4-21.3 mL/min or 1.2-4.9 mL/min/kg. The absolute (i.e. non-indexed) GFR value was not dependent on BW. Thus, indexation of GFR to BW in cats would not standardize the GFR value, but could introduce bias in clinical interpretation. Significant effects of breed, plasma protein concentration and plasma albumin concentration on GFR were demonstrated. Plasma concentrations of urea and creatinine, when assessed separately, were also weakly correlated with GFR in healthy cats. These combined findings contribute to a better understanding of renal function assessment in cats. Copyright © 2014 Elsevier Ltd. All rights reserved.

Studying Wind Chill Index as a Climatic Index Effective on the Health of Athletes and Tourists Interested in Winter Sports

PubMed Central

Roshan, Gholamreza; Mirkatouli, Gafar; Shakoor, Ali; Mohammad-Nejad, Vahid

2010-01-01

Purpose Estimating wind chill index as one of the indexes effective in body comfort, specifically for athletes and tourists interested in winter sports. Methods Meteorology data including temperature and the percentage of relative humidity of 6 synoptic stations of Chaharmahal-Bakhtiyrai province, Iran from 1990 to 2007 were extracted from Iranian Meteorology Site. In order to calculate the values of wind chill, the innovative formula of NOAA Meteorology Services Center [T (WC)= 35.74+0.6215T-35.75V+0.4275TV] was used. Results After analyzing wind in all stations, it became evident that the great percentage of wind calm related to fall, and spring had the most wind distortions. In studying the mean temperature during this studying period, Koohrang station with mean of 9.8°C was identified as the coldest station and Lordegan with a mean of 17°C represented the warmest station of the region observed. According to degrees derived from wind chill index, Koohrang station in January with a mean of −28.75 was known as the coldest and roughest station. Conclusion Among the studied stations, Koohrang had the most intensive degrees of wind chill occurrence and Lordegan had the calmest conditions. Therefore, athletes and tourists should use warmer clothes and covers in cold seasons in Koohrang in comparison with other studied regions, in order to protect themselves from the negative effects of sudden cold and occurrence of intense wind chills. PMID:22375198

New methods for indexing multi-lattice diffraction data

PubMed Central

Gildea, Richard J.; Waterman, David G.; Parkhurst, James M.; Axford, Danny; Sutton, Geoff; Stuart, David I.; Sauter, Nicholas K.; Evans, Gwyndaf; Winter, Graeme

2014-01-01

A new indexing method is presented which is capable of indexing multiple crystal lattices from narrow wedges of diffraction data. The method takes advantage of a simplification of Fourier transform-based methods that is applicable when the unit-cell dimensions are known a priori. The efficacy of this method is demonstrated with both semi-synthetic multi-lattice data and real multi-lattice data recorded from crystals of ∼1 µm in size, where it is shown that up to six lattices can be successfully indexed and subsequently integrated from a 1° wedge of data. Analysis is presented which shows that improvements in data-quality indicators can be obtained through accurate identification and rejection of overlapping reflections prior to scaling. PMID:25286849

New methods for indexing multi-lattice diffraction data.

PubMed

Gildea, Richard J; Waterman, David G; Parkhurst, James M; Axford, Danny; Sutton, Geoff; Stuart, David I; Sauter, Nicholas K; Evans, Gwyndaf; Winter, Graeme

2014-10-01

A new indexing method is presented which is capable of indexing multiple crystal lattices from narrow wedges of diffraction data. The method takes advantage of a simplification of Fourier transform-based methods that is applicable when the unit-cell dimensions are known a priori. The efficacy of this method is demonstrated with both semi-synthetic multi-lattice data and real multi-lattice data recorded from crystals of ∼1 µm in size, where it is shown that up to six lattices can be successfully indexed and subsequently integrated from a 1° wedge of data. Analysis is presented which shows that improvements in data-quality indicators can be obtained through accurate identification and rejection of overlapping reflections prior to scaling.

New methods for indexing multi-lattice diffraction data

DOE PAGES

Gildea, Richard J.; Waterman, David G.; Parkhurst, James M.; ...

2014-09-27

A new indexing method is presented which is capable of indexing multiple crystal lattices from narrow wedges of diffraction data. The method takes advantage of a simplification of Fourier transform-based methods that is applicable when the unit-cell dimensions are known a priori. The efficacy of this method is demonstrated with both semi-synthetic multi-lattice data and real multi-lattice data recorded from crystals of ~1 µm in size, where it is shown that up to six lattices can be successfully indexed and subsequently integrated from a 1° wedge of data. Analysis is presented which shows that improvements in data-quality indicators can bemore » obtained through accurate identification and rejection of overlapping reflections prior to scaling.« less

[Comparison of two algorithms for development of design space-overlapping method and probability-based method].

PubMed

Shao, Jing-Yuan; Qu, Hai-Bin; Gong, Xing-Chu

2018-05-01

In this work, two algorithms (overlapping method and the probability-based method) for design space calculation were compared by using the data collected from extraction process of Codonopsis Radix as an example. In the probability-based method, experimental error was simulated to calculate the probability of reaching the standard. The effects of several parameters on the calculated design space were studied, including simulation number, step length, and the acceptable probability threshold. For the extraction process of Codonopsis Radix, 10 000 times of simulation and 0.02 for the calculation step length can lead to a satisfactory design space. In general, the overlapping method is easy to understand, and can be realized by several kinds of commercial software without coding programs, but the reliability of the process evaluation indexes when operating in the design space is not indicated. Probability-based method is complex in calculation, but can provide the reliability to ensure that the process indexes can reach the standard within the acceptable probability threshold. In addition, there is no probability mutation in the edge of design space by probability-based method. Therefore, probability-based method is recommended for design space calculation. Copyright© by the Chinese Pharmaceutical Association.

A study on operation efficiency evaluation based on firm's financial index and benchmark selection: take China Unicom as an example

NASA Astrophysics Data System (ADS)

Wu, Zu-guang; Tian, Zhan-jun; Liu, Hui; Huang, Rui; Zhu, Guo-hua

2009-07-01

Being the only listed telecom operators of A share market, China Unicom has always been attracted many institutional investors under the concept of 3G recent years,which itself is a great technical progress expectation.Do the institutional investors or the concept of technical progress have signficant effect on the improving of firm's operating efficiency?Though reviewing the documentary about operating efficiency we find that schoolars study this problem useing the regress analyzing based on traditional production function and data envelopment analysis(DEA) and financial index anayzing and marginal function and capital labor ratio coefficient etc. All the methods mainly based on macrodata. This paper we use the micro-data of company to evaluate the operating efficiency.Using factor analyzing based on financial index and comparing the factor score of three years from 2005 to 2007, we find that China Unicom's operating efficiency is under the averge level of benchmark corporates and has't improved under the concept of 3G from 2005 to 2007.In other words,institutional investor or the conception of technical progress expectation have faint effect on the changes of China Unicom's operating efficiency. Selecting benchmark corporates as post to evaluate the operating efficiency is a characteristic of this method ,which is basicallly sipmly and direct.This method is suit for the operation efficiency evaluation of agriculture listed companies because agriculture listed also face technical progress and marketing concept such as tax-free etc.

[Use of the reliable change index to evaluate the effectiveness of clinical interventions: Application of an asthma training program].

PubMed

Montero, Mikel; Iraurgi, Ioseba; Matellanes, Begoña; Montero, José Manuel

2015-12-01

To compare two methods for the evaluation of outcomes to assess effectiveness of a therapeutic intervention of a professional education program on asthma control. A naturalistic, intervention study in which asthmatic patients were attended by clinicians (IG group) who Had taken part in a special education program and a control group (CG) that received medical assistance from clinicians still waiting to be trained. Five urban Primary Care Health Centres of the same region. From an initial sample of 100 patients, 76 formed the final sample for analysis. The study included 37 males and 39 females, aged between 18 and 65 years (M=41.2 years). The two study groups were found to be homogeneous except for the sex variable. Training program for clinical treatment adherence. Peak flow as spirometric index, and structured interview. The results were initially analysed using classical techniques based on robust ANOVA models, and then by calculating the Reliable Change Index (RCI). ANOVA models, conducted separately for each sex, showed no significant differences, due to sample size. RCI methodology showed significant differences in the percentage of patients improved in both groups, as well as clinically relevant changes being observed individually. The RCI method is presented as an attractive alternative as regards the classical methods of analysis that can help in the clinical decision. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

Fractal propagation method enables realistic optical microscopy simulations in biological tissues

PubMed Central

Glaser, Adam K.; Chen, Ye; Liu, Jonathan T.C.

2017-01-01

Current simulation methods for light transport in biological media have limited efficiency and realism when applied to three-dimensional microscopic light transport in biological tissues with refractive heterogeneities. We describe here a technique which combines a beam propagation method valid for modeling light transport in media with weak variations in refractive index, with a fractal model of refractive index turbulence. In contrast to standard simulation methods, this fractal propagation method (FPM) is able to accurately and efficiently simulate the diffraction effects of focused beams, as well as the microscopic heterogeneities present in tissue that result in scattering, refractive beam steering, and the aberration of beam foci. We validate the technique and the relationship between the FPM model parameters and conventional optical parameters used to describe tissues, and also demonstrate the method’s flexibility and robustness by examining the steering and distortion of Gaussian and Bessel beams in tissue with comparison to experimental data. We show that the FPM has utility for the accurate investigation and optimization of optical microscopy methods such as light-sheet, confocal, and nonlinear microscopy. PMID:28983499

Breaking the Sound Barrier with a Hummingbird's Index to Musical Themes.

ERIC Educational Resources Information Center

Bauer, Harry C.

1978-01-01

This review of Denys Parsons'"Directory of Tunes and Musical Themes" describes its simple but effective method of identifying musical compositions. Comparisons are made with other prominent musical reference works, particularly those of Harold Barlow and Sam Morgenstern. (JD)

Comparison of FIB-4 index and aspartate aminotransferase to platelet ratio index on carcinogenesis in chronic hepatitis B treated with entecavir

PubMed Central

Nishikawa, Hiroki; Nishijima, Norihiro; Enomoto, Hirayuki; Sakamoto, Azusa; Nasu, Akihiro; Komekado, Hideyuki; Nishimura, Takashi; Kita, Ryuichi; Kimura, Toru; Iijima, Hiroko; Nishiguchi, Shuhei; Osaki, Yukio

2017-01-01

Aims: We sought to compare the effects of FIB-4 index and aspartate aminotransferase to platelet ratio index (APRI) on hepatocellular carcinoma (HCC) incidence in chronic hepatitis B (CHB) patients undergoing entecavir (ETV) therapy. Patient and methods: A total of 338 nucleosides analogue therapy naïve CHB patients initially treated with ETV were analyzed. The optimal cutoff points in each continuous variable were determined by receiver operating curve (ROC) analysis. The effects of FIB-4 index and APRI on HCC incidence were compared using time-dependent ROC analysis and factors linked to HCC incidence were also examined using univariate and multivariate analyses. Results: There were 215 males and 123 females with the median age of 52 years and the median baseline HBV-DNA level of 6.6 log copies/ml. The median follow-up interval after the initiation of ETV therapy was 4.99 years. During the follow-up period, 33 patients (9.8%) developed HCC. The 3-, 5- 7-year cumulative HCC incidence rates in all cases were 4.4%, 9.2% and 13.5%, respectively. In the multivariate analysis, FIB-4 index revealed to be an independent predictor associated with HCC incidence, while APRI was not. In the time-dependent ROC analyses for all cases and for all subgroups analyses stratified by viral status or cirrhosis status, all area under the ROCs in each time point (2-, 3-, 4-, 5-, 6-, and 7-year) of FIB-4 index were higher than those of APRI. Conclusion: FIB-4 index rather than APRI can be a useful predictor associated with HCC development for CHB patients undergoing ETV therapy. PMID:28243319

Effect of Miracle Fruit (Synsepalum dulcificum) Seed Oil (MFSO®) on the Measurable Improvement of Hair Breakage in Women with Damaged Hair

PubMed Central

Zhang, Yu; Wakeford, Charles

2017-01-01

Background: Hair breakage is a common unrecognized form of hair loss in women most often the result of hair weathering and traumatic grooming practices. Lipids are major determinants of the physical properties of the hair. Synsepalum dulcificum seed oil (MFSO®; Miracle Fruit Oil Co., Miami Beach, Florida), is an exotic fruit oil with physicochemical properties suited to providing a superior ability to reduce hair breakage. Objective: To assess the safety and efficacy of a hair oil containing MFSO and its effects on hair breakage rates. Methods: Healthy, long-haired women (age range: 19–63 years, mean age: 36.7 years, standard deviation: 10.77 years) with excessive hair breakage were randomized in this double-blind, placebo-controlled study to receive MFSO (n=24), vehicle (n=17), or argan oil (n=16). Measurements of hair length, hair diameter, and Hair Mass Index were performed at baseline, Month 4, and Month 8. Hair Breakage Index and the Healthy Hair Index values were calculated from the trichometer measurements, and subject self-assessment questionnaires were conducted. The primary efficacy endpoints were the percent change in Healthy Hair Index 75 and Healthy Hair Index 50 measurements from baseline to the eighth month. Results: The Healthy Hair Index calculations, expressed as percent change from baseline to Month 4 and from baseline to Month 8, revealed that the MFSO® treatment group improved by 103.6 percent and 215.7 percent for the Healthy Hair Index 75 and 133.7 and 188.3 percent for the Healthy Hair Index 50 values, respectively. When compared with the vehicle and the argan oil brand groups, the Healthy Hair Index levels were significantly higher (p < 0.001) for the MFSO® treatment group, indicating a much greater ability to increase the levels of unbroken hairs by reducing hair breakage. With respect to the mean percent improvements from baseline to Month 4 and Month 8, the MFSO® hair oil treatment group was better than each of the other two treatment groups by at least 117.6 percent and 234.9 percent for the Healthy Hair Index 75 and 316.5 percent and 312 percent for the Healthy Hair Index 50 values, respectively, thereby achieving the primary efficacy objective. Subjects favored the MFSO® hair oil treatment, rating it as safe, effective, and aesthetically pleasing. Conclusions: The MFSO hair oil product is a safe and effective option for the treatment of women suffering from hair breakage and damaged hair. PMID:29399260

Effect of Miracle Fruit (Synsepalum dulcificum) Seed Oil (MFSO®) on the Measurable Improvement of Hair Breakage in Women with Damaged Hair: A Randomized, Double-blind, Placebo-controlled, Eight-month Trial.

PubMed

Del Campo, Roberta; Zhang, Yu; Wakeford, Charles

2017-11-01

Background: Hair breakage is a common unrecognized form of hair loss in women most often the result of hair weathering and traumatic grooming practices. Lipids are major determinants of the physical properties of the hair. Synsepalum dulcificum seed oil (MFSO ® ; Miracle Fruit Oil Co., Miami Beach, Florida), is an exotic fruit oil with physicochemical properties suited to providing a superior ability to reduce hair breakage. Objective: To assess the safety and efficacy of a hair oil containing MFSO and its effects on hair breakage rates. Methods: Healthy, long-haired women (age range: 19-63 years, mean age: 36.7 years, standard deviation: 10.77 years) with excessive hair breakage were randomized in this double-blind, placebo-controlled study to receive MFSO (n=24), vehicle (n=17), or argan oil (n=16). Measurements of hair length, hair diameter, and Hair Mass Index were performed at baseline, Month 4, and Month 8. Hair Breakage Index and the Healthy Hair Index values were calculated from the trichometer measurements, and subject self-assessment questionnaires were conducted. The primary efficacy endpoints were the percent change in Healthy Hair Index 75 and Healthy Hair Index 50 measurements from baseline to the eighth month. Results: The Healthy Hair Index calculations, expressed as percent change from baseline to Month 4 and from baseline to Month 8, revealed that the MFSO ® treatment group improved by 103.6 percent and 215.7 percent for the Healthy Hair Index 75 and 133.7 and 188.3 percent for the Healthy Hair Index 50 values, respectively. When compared with the vehicle and the argan oil brand groups, the Healthy Hair Index levels were significantly higher (p < 0.001) for the MFSO ® treatment group, indicating a much greater ability to increase the levels of unbroken hairs by reducing hair breakage. With respect to the mean percent improvements from baseline to Month 4 and Month 8, the MFSO ® hair oil treatment group was better than each of the other two treatment groups by at least 117.6 percent and 234.9 percent for the Healthy Hair Index 75 and 316.5 percent and 312 percent for the Healthy Hair Index 50 values, respectively, thereby achieving the primary efficacy objective. Subjects favored the MFSO ® hair oil treatment, rating it as safe, effective, and aesthetically pleasing. Conclusions: The MFSO hair oil product is a safe and effective option for the treatment of women suffering from hair breakage and damaged hair.

Remote atmospheric probing by ground to ground line of sight optical methods

NASA Technical Reports Server (NTRS)

Lawrence, R. S.

1969-01-01

The optical effects arising from refractive-index variations in the clear air are qualitatively described, and the possibilities are discussed of using those effects for remotely sensing the physical properties of the atmosphere. The effects include scintillations, path length fluctuations, spreading of a laser beam, deflection of the beam, and depolarization. The physical properties that may be measured include the average temperature along the path, the vertical temperature gradient, and the distribution along the path of the strength of turbulence and the transverse wind velocity. Line-of-sight laser beam methods are clearly effective in measuring the average properties, but less effective in measuring distributions along the path. Fundamental limitations to the resolution are pointed out and experiments are recommended to investigate the practicality of the methods.

Research on the Risk Early Warning Method of Material Supplier Performance in Power Industry

NASA Astrophysics Data System (ADS)

Chen, Peng; Zhang, Xi

2018-01-01

The early warning of supplier performance risk is still in the initial stage interiorly, and research on the early warning mechanism to identify, analyze and prevent the performance risk is few. In this paper, a new method aiming at marerial supplier performance risk in power industry is proposed, firstly, establishing a set of risk early warning indexes, Then use the ECM method to classify the indexes to form different risk grades. Then, improving Crock Ford risk quantization model by considering three indicators, including the stability of power system, economic losses and successful bid ratio to form the predictive risk grade, and ultimately using short board effect principle to form the ultimate risk grade to truly reflect the supplier performance risk. Finally, making empirical analysis on supplier performance and putting forward the counter measures and prevention strategies for different risks.

Model-Free Adaptive Control for Unknown Nonlinear Zero-Sum Differential Game.

PubMed

Zhong, Xiangnan; He, Haibo; Wang, Ding; Ni, Zhen

2018-05-01

In this paper, we present a new model-free globalized dual heuristic dynamic programming (GDHP) approach for the discrete-time nonlinear zero-sum game problems. First, the online learning algorithm is proposed based on the GDHP method to solve the Hamilton-Jacobi-Isaacs equation associated with optimal regulation control problem. By setting backward one step of the definition of performance index, the requirement of system dynamics, or an identifier is relaxed in the proposed method. Then, three neural networks are established to approximate the optimal saddle point feedback control law, the disturbance law, and the performance index, respectively. The explicit updating rules for these three neural networks are provided based on the data generated during the online learning along the system trajectories. The stability analysis in terms of the neural network approximation errors is discussed based on the Lyapunov approach. Finally, two simulation examples are provided to show the effectiveness of the proposed method.

Identifying multiple influential spreaders based on generalized closeness centrality

NASA Astrophysics Data System (ADS)

Liu, Huan-Li; Ma, Chuang; Xiang, Bing-Bing; Tang, Ming; Zhang, Hai-Feng

2018-02-01

To maximize the spreading influence of multiple spreaders in complex networks, one important fact cannot be ignored: the multiple spreaders should be dispersively distributed in networks, which can effectively reduce the redundance of information spreading. For this purpose, we define a generalized closeness centrality (GCC) index by generalizing the closeness centrality index to a set of nodes. The problem converts to how to identify multiple spreaders such that an objective function has the minimal value. By comparing with the K-means clustering algorithm, we find that the optimization problem is very similar to the problem of minimizing the objective function in the K-means method. Therefore, how to find multiple nodes with the highest GCC value can be approximately solved by the K-means method. Two typical transmission dynamics-epidemic spreading process and rumor spreading process are implemented in real networks to verify the good performance of our proposed method.

Spatial generalised linear mixed models based on distances.

PubMed

Melo, Oscar O; Mateu, Jorge; Melo, Carlos E

2016-10-01

Risk models derived from environmental data have been widely shown to be effective in delineating geographical areas of risk because they are intuitively easy to understand. We present a new method based on distances, which allows the modelling of continuous and non-continuous random variables through distance-based spatial generalised linear mixed models. The parameters are estimated using Markov chain Monte Carlo maximum likelihood, which is a feasible and a useful technique. The proposed method depends on a detrending step built from continuous or categorical explanatory variables, or a mixture among them, by using an appropriate Euclidean distance. The method is illustrated through the analysis of the variation in the prevalence of Loa loa among a sample of village residents in Cameroon, where the explanatory variables included elevation, together with maximum normalised-difference vegetation index and the standard deviation of normalised-difference vegetation index calculated from repeated satellite scans over time. © The Author(s) 2013.

An Analysis of the Relationship Between the Heat Index and Arrivals in the Emergency Department

PubMed Central

Levy, Matthew; Broccoli, Morgan; Cole, Gai; Jenkins, J Lee; Klein, Eili Y.

2015-01-01

Background: Heatwaves are one of the most deadly weather-related events in the United States and account for more deaths annually than hurricanes, tornadoes, floods, and earthquakes combined. However, there are few statistically rigorous studies of the effect of heatwaves on emergency department (ED) arrivals. A better understanding of this relationship can help hospitals plan better and provide better care for patients during these types of events. Methods: A retrospective review of all ED patient arrivals that occurred from April 15 through August 15 for the years 2008 through 2013 was performed. Daily patient arrival data were combined with weather data (temperature and humidity) to examine the potential relationships between the heat index and ED arrivals as well as the length of time patients spend in the ED using generalized additive models. In particular the effect the 2012 heat wave that swept across the United States, and which was hypothesized to increase arrivals was examined. Results: While there was no relationship found between the heat index and arrivals on a single day, a non-linear relationship was found between the mean three-day heat index and the number of daily arrivals. As the mean three-day heat index initially increased, the number of arrivals significantly declined. However, as the heat index continued to increase, the number of arrivals increased. It was estimated that there was approximately a 2% increase in arrivals when the mean heat index for three days approached 100°F. This relationship was strongest for adults aged 18-64, as well as for patients arriving with lower acuity. Additionally, a positive relationship was noted between the mean three-day heat index and the length of stay (LOS) for patients in the ED, but no relationship was found for the time from which a patient was first seen to when a disposition decision was made. No significant relationship was found for the effect of the 2012 heat wave on ED arrivals, though it did have an effect on patient LOS. Conclusion: A single hot day has only a limited effect on ED arrivals, but continued hot weather has a cumulative effect. When the heat index is high (~90°F) for a number of days in a row, this curtails peoples activities, but if the heat index is very hot (~100°F) this likely results in an exacerbation of underlying conditions as well as heat-related events that drives an increase in ED arrivals. Periods of high heat also affects the length of stay of patients either by complicating care or by making it more difficult to discharge patients. PMID:26579329

Automated method to compute Evans index for diagnosis of idiopathic normal pressure hydrocephalus on brain CT images

NASA Astrophysics Data System (ADS)

Takahashi, Noriyuki; Kinoshita, Toshibumi; Ohmura, Tomomi; Matsuyama, Eri; Toyoshima, Hideto

2017-03-01

The early diagnosis of idiopathic normal pressure hydrocephalus (iNPH) considered as a treatable dementia is important. The iNPH causes enlargement of lateral ventricles (LVs). The degree of the enlargement of the LVs on CT or MR images is evaluated by using a diagnostic imaging criterion, Evans index. Evans index is defined as the ratio of the maximal width of frontal horns (FH) of the LVs to the maximal width of the inner skull (IS). Evans index is the most commonly used parameter for the evaluation of ventricular enlargement. However, manual measurement of Evans index is a time-consuming process. In this study, we present an automated method to compute Evans index on brain CT images. The algorithm of the method consisted of five major steps: standardization of CT data to an atlas, extraction of FH and IS regions, the search for the outmost points of bilateral FH regions, determination of the maximal widths of both the FH and the IS, and calculation of Evans index. The standardization to the atlas was performed by using linear affine transformation and non-linear wrapping techniques. The FH regions were segmented by using a three dimensional region growing technique. This scheme was applied to CT scans from 44 subjects, including 13 iNPH patients. The average difference in Evans index between the proposed method and manual measurement was 0.01 (1.6%), and the correlation coefficient of these data for the Evans index was 0.98. Therefore, this computerized method may have the potential to accurately compute Evans index for the diagnosis of iNPH on CT images.

Electrically controlled cloud of bulk nanobubbles in water solutions

PubMed Central

Postnikov, Alexander V.; Uvarov, Ilia V.; Lokhanin, Mikhail V.

2017-01-01

Using different experimental techniques we visualize a cloud of gas in water that is produced electrochemically by the alternating polarity process. Liquid enriched with gas does not contain bubbles strongly scattering visible light but its refractive index changes significantly near the electrodes. The change of the refractive index is a collective effect of bulk nanobubbles with a diameter smaller than 200 nm. Any alternative explanation fails to explain the magnitude of the effect. Spatial structure of the cloud is investigated with the optical lever method. Its dynamics is visualised observing optical distortion of the electrode images or using differential interference contrast method. The cloud covers concentric electrodes, in a steady state it is roughly hemispherical with a size two times larger than the size of the electrode structure. When the electrical pulses are switched off the cloud disappears in less than one second. The total concentration of gases can reach very high value estimated as 3.5 × 1020 cm−3 that corresponds to an effective supersaturation of 500 and 150 for hydrogen and oxygen, respectively. PMID:28727812

Study on the Application of the Kent Index Method on the Risk Assessment of Disastrous Accidents in Subway Engineering

PubMed Central

Lu, Hao; Wang, Mingyang; Yang, Baohuai; Rong, Xiaoli

2013-01-01

With the development of subway engineering, according to uncertain factors and serious accidents involved in the construction of subways, implementing risk assessment is necessary and may bring a number of benefits for construction safety. The Kent index method extensively used in pipeline construction is improved to make risk assessment much more practical for the risk assessment of disastrous accidents in subway engineering. In the improved method, the indexes are divided into four categories, namely, basic, design, construction, and consequence indexes. In this study, a risk assessment model containing four kinds of indexes is provided. Three kinds of risk occurrence modes are listed. The probability index model which considers the relativity of the indexes is established according to the risk occurrence modes. The model provides the risk assessment process through the fault tree method and has been applied in the risk assessment of Nanjing subway's river-crossing tunnel construction. Based on the assessment results, the builders were informed of what risks should be noticed and what they should do to avoid the risks. The need for further research is discussed. Overall, this method may provide a tool for the builders, and improve the safety of the construction. PMID:23710136

CD-Based Indices for Link Prediction in Complex Network.

PubMed

Wang, Tao; Wang, Hongjue; Wang, Xiaoxia

2016-01-01

Lots of similarity-based algorithms have been designed to deal with the problem of link prediction in the past decade. In order to improve prediction accuracy, a novel cosine similarity index CD based on distance between nodes and cosine value between vectors is proposed in this paper. Firstly, node coordinate matrix can be obtained by node distances which are different from distance matrix and row vectors of the matrix are regarded as coordinates of nodes. Then, cosine value between node coordinates is used as their similarity index. A local community density index LD is also proposed. Then, a series of CD-based indices include CD-LD-k, CD*LD-k, CD-k and CDI are presented and applied in ten real networks. Experimental results demonstrate the effectiveness of CD-based indices. The effects of network clustering coefficient and assortative coefficient on prediction accuracy of indices are analyzed. CD-LD-k and CD*LD-k can improve prediction accuracy without considering the assortative coefficient of network is negative or positive. According to analysis of relative precision of each method on each network, CD-LD-k and CD*LD-k indices have excellent average performance and robustness. CD and CD-k indices perform better on positive assortative networks than on negative assortative networks. For negative assortative networks, we improve and refine CD index, referred as CDI index, combining the advantages of CD index and evolutionary mechanism of the network model BA. Experimental results reveal that CDI index can increase prediction accuracy of CD on negative assortative networks.

CD-Based Indices for Link Prediction in Complex Network

PubMed Central

Wang, Tao; Wang, Hongjue; Wang, Xiaoxia

2016-01-01

Lots of similarity-based algorithms have been designed to deal with the problem of link prediction in the past decade. In order to improve prediction accuracy, a novel cosine similarity index CD based on distance between nodes and cosine value between vectors is proposed in this paper. Firstly, node coordinate matrix can be obtained by node distances which are different from distance matrix and row vectors of the matrix are regarded as coordinates of nodes. Then, cosine value between node coordinates is used as their similarity index. A local community density index LD is also proposed. Then, a series of CD-based indices include CD-LD-k, CD*LD-k, CD-k and CDI are presented and applied in ten real networks. Experimental results demonstrate the effectiveness of CD-based indices. The effects of network clustering coefficient and assortative coefficient on prediction accuracy of indices are analyzed. CD-LD-k and CD*LD-k can improve prediction accuracy without considering the assortative coefficient of network is negative or positive. According to analysis of relative precision of each method on each network, CD-LD-k and CD*LD-k indices have excellent average performance and robustness. CD and CD-k indices perform better on positive assortative networks than on negative assortative networks. For negative assortative networks, we improve and refine CD index, referred as CDI index, combining the advantages of CD index and evolutionary mechanism of the network model BA. Experimental results reveal that CDI index can increase prediction accuracy of CD on negative assortative networks. PMID:26752405

Gender determination: Role of lip prints, finger prints and mandibular canine index

PubMed Central

KRISHNAN, RESHMA POOTHAKULATH; THANGAVELU, RADHIKA; RATHNAVELU, VIDHYA; NARASIMHAN, MALATHI

2016-01-01

Personal identification has a pivotal role in forensic investigations. Gender determination is an essential step in personal identification. Despite the advent of advanced techniques such as DNA fingerprinting, methods such as lip print and fingerprint analysis and mandibular canine index calculations are routinely used in gender determination, as they are simple and cost-effective. The present study investigated the hypothesis that lip print analysis is an effective tool in gender determination compared with fingerprint analysis and the mandibular canine index. The predominant patterns of lip prints and fingerprints were analyzed in males and females, and the efficacy of the mandibular canine index in gender determination was evaluated. The study group comprised 50 students, 25 males and 25 females who were 18–25 years of age. Lip prints and fingerprints were obtained and classified according to Tsuchihashi's classification and Kücken and Newell's classification, respectively. Mandibular impressions were made and the mandibular canine index was calculated. Type I and Type I' lip prints were predominant in females, and Type IV lip prints were predominant in males. The analysis of fingerprints revealed that the loop fingerprint pattern was predominant in both males and females. The mandibular canine index was not found to be significant in gender identification. The predominant patterns of lip prints were distinct for males and females; conversely, fingerprints were demonstrated to be similar in both genders. Therefore, lip prints hold an increased potential for gender determination, as compared with fingerprints, and the mandibular canine index is not a reliable indicator of gender. PMID:27284316

Effect of blood sampling schedule and method of calculating the area under the curve on validity and precision of glycaemic index values.

PubMed

Wolever, Thomas M S

2004-02-01

To evaluate the suitability for glycaemic index (GI) calculations of using blood sampling schedules and methods of calculating area under the curve (AUC) different from those recommended, the GI values of five foods were determined by recommended methods (capillary blood glucose measured seven times over 2.0 h) in forty-seven normal subjects and different calculations performed on the same data set. The AUC was calculated in four ways: incremental AUC (iAUC; recommended method), iAUC above the minimum blood glucose value (AUCmin), net AUC (netAUC) and iAUC including area only before the glycaemic response curve cuts the baseline (AUCcut). In addition, iAUC was calculated using four different sets of less than seven blood samples. GI values were derived using each AUC calculation. The mean GI values of the foods varied significantly according to the method of calculating GI. The standard deviation of GI values calculating using iAUC (20.4), was lower than six of the seven other methods, and significantly less (P<0.05) than that using netAUC (24.0). To be a valid index of food glycaemic response independent of subject characteristics, GI values in subjects should not be related to their AUC after oral glucose. However, calculating GI using AUCmin or less than seven blood samples resulted in significant (P<0.05) relationships between GI and mean AUC. It is concluded that, in subjects without diabetes, the recommended blood sampling schedule and method of AUC calculation yields more valid and/or more precise GI values than the seven other methods tested here. The only method whose results agreed reasonably well with the recommended method (ie. within +/-5 %) was AUCcut.

Use of a variational moment method in calculating propagation constants for waveguides with an arbitrary index profile.

PubMed

Hardy, A; Itzkowitz, M; Griffel, G

1989-05-15

A variational moment method is used to calculate propagation constants of 1-D optical waveguides with an arbitrary index profile. The method is applicable to 2-D waveguides as well, and the index profiles need not be symmetric. Examples are given for the lowest-order and the next higher-order modes and are compared with exact numerical solutions.

Estimating site index from tree species composition in mixed stands of upland eastern hardwoods: Should shrubs be included?

Treesearch

W. Henry McNab

2010-01-01

Site index is the most widely used method for site quality assessment in hardwood forests of the eastern United States. Its application in most oak (Quercus sp. L.) dominated stands is often problematic, however, because available sample trees usually do not meet important underlying assumptions of the method. A prototype method for predicting site index from tree...

Hospitalization flow in the public and private systems in the state of Sao Paulo, Brazil

PubMed Central

Rocha, Juan Stuardo Yazlle; Monteiro, Rosane Aparecida; Moreira, Marizélia Leão

2015-01-01

OBJECTIVE To describe the migration flows of demand for public and private hospital care among the health regions of the state of Sao Paulo, Brazil. METHODS Study based on a database of hospitalizations in the public and private systems of the state of Sao Paulo, Southeastern Brazil, in 2006. We analyzed data from 17 health regions of the state, considering people hospitalized in their own health region and those who migrated outwards (emigration) or came from other regions (immigration). The index of migration effectiveness of patients from both systems was estimated. The coverage (hospitalization coefficient) was analyzed in relation to the number of inpatient beds per population and the indexes of migration effectiveness. RESULTS The index of migration effectiveness applied to the hospital care demand flow allowed characterizing health regions with flow balance, with high emigration of public and private patients, and with high attraction of public and private patients. CONCLUSIONS There are differences in hospital care access and opportunities among health regions in the state of Sao Paulo, Brazil. PMID:26465661

Hospitalization flow in the public and private systems in the state of Sao Paulo, Brazil.

PubMed

Rocha, Juan Stuardo Yazlle; Monteiro, Rosane Aparecida; Moreira, Marizélia Leão

2015-01-01

OBJECTIVE To describe the migration flows of demand for public and private hospital care among the health regions of the state of Sao Paulo, Brazil.METHODS Study based on a database of hospitalizations in the public and private systems of the state of Sao Paulo, Southeastern Brazil, in 2006. We analyzed data from 17 health regions of the state, considering people hospitalized in their own health region and those who migrated outwards (emigration) or came from other regions (immigration). The index of migration effectiveness of patients from both systems was estimated. The coverage (hospitalization coefficient) was analyzed in relation to the number of inpatient beds per population and the indexes of migration effectiveness.RESULTS The index of migration effectiveness applied to the hospital care demand flow allowed characterizing health regions with flow balance, with high emigration of public and private patients, and with high attraction of public and private patients.CONCLUSIONS There are differences in hospital care access and opportunities among health regions in the state of Sao Paulo, Brazil.

Effects of brain-computer interface-based functional electrical stimulation on brain activation in stroke patients: a pilot randomized controlled trial.

PubMed

Chung, EunJung; Kim, Jung-Hee; Park, Dae-Sung; Lee, Byoung-Hee

2015-03-01

[Purpose] This study sought to determine the effects of brain-computer interface-based functional electrical stimulation (BCI-FES) on brain activation in patients with stroke. [Subjects] The subjects were randomized to in a BCI-FES group (n=5) and a functional electrical stimulation (FES) group (n=5). [Methods] Patients in the BCI-FES group received ankle dorsiflexion training with FES for 30 minutes per day, 5 times under the brain-computer interface-based program. The FES group received ankle dorsiflexion training with FES for the same amount of time. [Results] The BCI-FES group demonstrated significant differences in the frontopolar regions 1 and 2 attention indexes, and frontopolar 1 activation index. The FES group demonstrated no significant differences. There were significant differences in the frontopolar 1 region activation index between the two groups after the interventions. [Conclusion] The results of this study suggest that BCI-FES training may be more effective in stimulating brain activation than only FES training in patients recovering from stroke.

The evaluation of MCI, MI, PMI and GT on both genders with different age and dental status

PubMed Central

Sener, S

2015-01-01

Objectives: The aim of this study was to measure the mandibular cortical index (MCI), mental index (MI), panoramic mandibular index (PMI) and cortical bone thickness in the zone of the gonial angle (GT) in panoramic radiographies from a large sample of males and females and to determine how they relate to patients' age, gender and dental status. Methods: 910 panoramic radiographs were obtained and grouped into age, dental status and gender. The MCI, MI, PMI and GT were analysed. Results: Remarkable differences were observed for MCI and GT regarding gender, age groups and dental status on both sides (p < 0.05). While age and dental status had an effect on the MI and PMI in females, dental status had an effect on the MI and PMI in males (p < 0.05). Also, gender had an effect on the MI and PMI (p < 0.05). Conclusions: The effects of age and tooth loss are different in females and males. In females, the harmful effects of tooth loss and age are more prominent according to the PMI and MI measurements. The effects of age and tooth loss in the GT and MCI measurements are similar, and these indices can be accepted as more reliable in studies including both genders. PMID:26133366

An automatic indexing method for medical documents.

PubMed Central

Wagner, M. M.

1991-01-01

This paper describes MetaIndex, an automatic indexing program that creates symbolic representations of documents for the purpose of document retrieval. MetaIndex uses a simple transition network parser to recognize a language that is derived from the set of main concepts in the Unified Medical Language System Metathesaurus (Meta-1). MetaIndex uses a hierarchy of medical concepts, also derived from Meta-1, to represent the content of documents. The goal of this approach is to improve document retrieval performance by better representation of documents. An evaluation method is described, and the performance of MetaIndex on the task of indexing the Slice of Life medical image collection is reported. PMID:1807564

Injection Laser Structure Design.

DTIC Science & Technology

1985-01-30

A. Linz and J. Butler Electrical Engineering Department Southern Methodist University Dallas, Texas 75275 Abstract A numerical method and the... NUMERICAL AND EFFECTIVE-INDEX METHODS FOR A CLASS OF DIELECTRIC WAVEGUIDES* H-.2 A. Linz and J.K. Butler Electrical Engineering Department Southern...University, Dallas, TX, where he is now Professor of Electrical methd w usd i notpraticl fr etensve odeingdue Engineering . His primary research areas are solid

[Using sequential indicator simulation method to define risk areas of soil heavy metals in farmland.

PubMed

Yang, Hao; Song, Ying Qiang; Hu, Yue Ming; Chen, Fei Xiang; Zhang, Rui

2018-05-01

The heavy metals in soil have serious impacts on safety, ecological environment and human health due to their toxicity and accumulation. It is necessary to efficiently identify the risk area of heavy metals in farmland soil, which is of important significance for environment protection, pollution warning and farmland risk control. We collected 204 samples and analyzed the contents of seven kinds of heavy metals (Cu, Zn, Pb, Cd, Cr, As, Hg) in Zengcheng District of Guangzhou, China. In order to overcame the problems of the data, including the limitation of abnormal values and skewness distribution and the smooth effect with the traditional kriging methods, we used sequential indicator simulation method (SISIM) to define the spatial distribution of heavy metals, and combined Hakanson index method to identify potential ecological risk area of heavy metals in farmland. The results showed that: (1) Based on the similar accuracy of spatial prediction of soil heavy metals, the SISIM had a better expression of detail rebuild than ordinary kriging in small scale area. Compared to indicator kriging, the SISIM had less error rate (4.9%-17.1%) in uncertainty evaluation of heavy-metal risk identification. The SISIM had less smooth effect and was more applicable to simulate the spatial uncertainty assessment of soil heavy metals and risk identification. (2) There was no pollution in Zengcheng's farmland. Moderate potential ecological risk was found in the southern part of study area due to enterprise production, human activities, and river sediments. This study combined the sequential indicator simulation with Hakanson risk index method, and effectively overcame the outlier information loss and smooth effect of traditional kriging method. It provided a new way to identify the soil heavy metal risk area of farmland in uneven sampling.

Ellipsometry-like analysis of polarization state for micro cracks using stress-induced light scattering method

NASA Astrophysics Data System (ADS)

Sakata, Yoshitaro; Terasaki, Nao; Sakai, Kazufumi; Nonaka, Kazuhiro

2016-03-01

Fine polishing techniques, such as chemical mechanical polishing (CMP), are important to glass substrate manufacturing. When these techniques involve mechanical interaction in the form of friction between the abrasive and the substrate surface during polishing, latent flaws may form on the product. Fine polishing induced latent flaws in glass substrates may become obvious during a subsequent cleaning process if the glass surface is eroded away by chemical interaction with a cleaning liquid. Thus, latent flaws reduce product yield. A novel technique (the stress-induced light scattering method; SILSM) which was combined with light scattering method and stress effects was proposed for inspecting surface to detect polishing induced latent flaws. This method is able to distinguish between latent flaws and tiny particles on the surface. In this method, an actuator deforms a sample inducing stress effects around the tip of a latent flaw caused by the deformation, which in turn changes the refractive index of the material around the tip of the latent flaw because of the photoelastic effect. A CCD camera detects this changed refractive index as variations in light-scattering intensity. In this study, the changes in reflection coefficients and polarization states after application of stress to a glass substrate were calculated and evaluated qualitatively using Jones matrix-like ellipsometry. As the results, it was shown that change in the polarization states around the tip of latent flaw were evaluated between before and after applied stress, qualitatively.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sahoo, Satiprasad; Dhar, Anirban, E-mail: anirban.dhar@gmail.com; Kar, Amlanjyoti

Environmental management of an area describes a policy for its systematic and sustainable environmental protection. In the present study, regional environmental vulnerability assessment in Hirakud command area of Odisha, India is envisaged based on Grey Analytic Hierarchy Process method (Grey–AHP) using integrated remote sensing (RS) and geographic information system (GIS) techniques. Grey–AHP combines the advantages of classical analytic hierarchy process (AHP) and grey clustering method for accurate estimation of weight coefficients. It is a new method for environmental vulnerability assessment. Environmental vulnerability index (EVI) uses natural, environmental and human impact related factors, e.g., soil, geology, elevation, slope, rainfall, temperature, windmore » speed, normalized difference vegetation index, drainage density, crop intensity, agricultural DRASTIC value, population density and road density. EVI map has been classified into four environmental vulnerability zones (EVZs) namely: ‘low’, ‘moderate’ ‘high’, and ‘extreme’ encompassing 17.87%, 44.44%, 27.81% and 9.88% of the study area, respectively. EVI map indicates that the northern part of the study area is more vulnerable from an environmental point of view. EVI map shows close correlation with elevation. Effectiveness of the zone classification is evaluated by using grey clustering method. General effectiveness is in between “better” and “common classes”. This analysis demonstrates the potential applicability of the methodology. - Highlights: • Environmental vulnerability zone identification based on Grey Analytic Hierarchy Process (AHP) • The effectiveness evaluation by means of a grey clustering method with support from AHP • Use of grey approach eliminates the excessive dependency on the experience of experts.« less

Extracting fields snow coverage information with HJ-1A/B satellites data

NASA Astrophysics Data System (ADS)

Dong, Wenquan; Meng, Jihua

2015-10-01

The distribution and change of snow coverage are sensitive factors of climate change. In northeast part of China, farmlands are still covered with snow in spring. Since sowing activity can only be done when the snow melted, fields snow coverage monitoring provides reference for the determination of sowing date. Because of the restriction of the sensors and application requirements, current researches on remote sensing of snow focus more on the study of musicale and large scale, rather than the study of small scale, and especially research on snow melting period is rarely reported.HJ-1A/B satellites are parts of little satellite constellation, focusing on environment and disaster monitoring and meteorological forecast. Compared to other data sources, HJ-1A/B satellites both have comparatively higher temporal and spatial resolution and are more conducive to monitor the variations of melting snow coverage at small watershed. This paper was based on HJ-1A/1B data, taking Hongxing farm of Bei'an, Heilongjiang Province, China as the study area. In this paper, we exploited the methods for extraction of snow cover information on farmland in two cases, both HJ-1A/1B CCD with HJ-1B IRS data and just HJ-1A/1B CCD data. The reason we chose the two cases is that, the two optical satellites HJ-1A/B are capable of providing a whole territory coverage period in visible light spectrum in two days, infrared spectrum in four days. So sometimes we can only obtain CCD image. In this case, the method of normalized snow index cannot be used to extract snow coverage information. Using HJ-1A/1B CCD with HJ-1B IRS data, combined with the theory of snow remote sensing monitoring, this paper analyzed spectral response characteristics of HJ-1A/1B satellites data, then the widely used Normalized Difference Snow Index(NDSI) and S3 Index were quoted to the HJ-1A/1B satellites data. The NDSI uses reflectance values of Red and SWIR spectral bands of HJ-1B, and S3 index uses reflectance values of NIR, Red and SWIR spectral bands. With multi-temporal HJ satellite data, the optimal threshold of normalized snow index was determined to divide the farmland into snow covering area, melting snow area and non-snow area. The results are quite similar to each other and of high accuracy, and the melting snow coverage can be well extracted by two types of normalized snow index. When we can only obtain CCD image, we use supervised classification method to extract melting snow coverage. With this method, the accuracy of fields snow coverage extraction is slightly lower than that using normalized snow index methods mentioned above. And in mountain area, the snow coverage area is slightly larger than that is extracted by normalized snow index methods, because the shadows make the color of snow in the valley darker, the supervised classification method divides it into non-snow coverage area, while the normalized snow index method well weakened the effect of shadow. This study shows that extraction accuracy in both cases is assessed, and both of them can meet the needs of practical applications. HJ-1A/1B satellites are conducive to monitor the variations of melting snow coverage over farmland, and they can provide reference for the determination of sowing date.

An evaluation of terrain-based downscaling of fractional snow covered area data sets based on LiDAR-derived snow data and orthoimagery

NASA Astrophysics Data System (ADS)

Cristea, Nicoleta C.; Breckheimer, Ian; Raleigh, Mark S.; HilleRisLambers, Janneke; Lundquist, Jessica D.

2017-08-01

Reliable maps of snow-covered areas at scales of meters to tens of meters, with daily temporal resolution, are essential to understanding snow heterogeneity, melt runoff, energy exchange, and ecological processes. Here we develop a parsimonious downscaling routine that can be applied to fractional snow covered area (fSCA) products from satellite platforms such as the Moderate Resolution Imaging Spectroradiometer (MODIS) that provide daily ˜500 m data, to derive higher-resolution snow presence/absence grids. The method uses a composite index combining both the topographic position index (TPI) to represent accumulation effects and the diurnal anisotropic heat (DAH, sun exposure) index to represent ablation effects. The procedure is evaluated and calibrated using airborne-derived high-resolution data sets across the Tuolumne watershed, CA using 11 scenes in 2014 to downscale to 30 m resolution. The average matching F score was 0.83. We then tested our method's transferability in time and space by comparing against the Tuolumne watershed in water years 2013 and 2015, and over an entirely different site, Mt. Rainier, WA in 2009 and 2011, to assess applicability to other topographic and climatic conditions. For application to sites without validation data, we recommend equal weights for the TPI and DAH indices and close TPI neighborhoods (60 and 27 m for downscaling to 30 and 3 m, respectively), which worked well in both our study areas. The method is less effective in forested areas, which still requires site-specific treatment. We demonstrate that the procedure can even be applied to downscale to 3 m resolution, a very fine scale relevant to alpine ecohydrology research.

Evaluation of different shadow detection and restoration methods and their impact on vegetation indices using UAV high-resolution imageries over vineyards

NASA Astrophysics Data System (ADS)

Aboutalebi, M.; Torres-Rua, A. F.; McKee, M.; Kustas, W. P.; Nieto, H.

2017-12-01

Shadows are an unavoidable component of high-resolution imagery. Although shadows can be a useful source of information about terrestrial features, they are a hindrance for image processing and lead to misclassification errors and increased uncertainty in defining surface reflectance properties. In precision agriculture activities, shadows may affect the performance of vegetation indices at pixel and plant scales. Thus, it becomes necessary to evaluate existing shadow detection and restoration methods, especially for applications that makes direct use of pixel information to estimate vegetation biomass, leaf area index (LAI), plant water use and stress, chlorophyll content, just to name a few. In this study, four high-resolution imageries captured by the Utah State University - AggieAir Unmanned Aerial Vehicle (UAV) system flown in 2014, 2015, and 2016 over a commercial vineyard located in the California for the USDA-Agricultural Research Service Grape Remote sensing Atmospheric Profile and Evapotranspiration Experiment (GRAPEX) Program are used for shadow detection and restoration. Four different methods for shadow detection are compared: (1) unsupervised classification, (2) supervised classification, (3) index-based method, and (4) physically-based method. Also, two different shadow restoration methods are evaluated: (1) linear correlation correction, and (2) gamma correction. The models' performance is evaluated over two vegetation indices: normalized difference vegetation index (NDVI) and LAI for both sunlit and shadowed pixels. Histogram and analysis of variance (ANOVA) are used as performance indicators. Results indicated that the performance of the supervised classification and the index-based method are better than other methods. In addition, there is a statistical difference between the average of NDVI and LAI on the sunlit and shadowed pixels. Among the shadow restoration methods, gamma correction visually works better than the linear correlation correction. Moreover, the statistical difference between sunlit and shadowed NDVI and LAI decreases after the application of the gamma restoration method. Potential effects of shadows on modeling surface energy balance and evapotranspiration using very high resolution UAV imagery over the GRAPEX vineyard will be discussed.

Search and Retrieval Index to EOS/ESD Symposium Proceedings - 1979 to 1984.

DTIC Science & Technology

1985-04-15

This book contains indexes used in searching for information contained in papers produced in Electrical Overstress/Electrostatic Discharge (EOS/ESD) Symposium 1979 to 1984. These indexes are the Alphabetical List of Index Terms, Subject Index, Author Index , Corporate Index, Keywords in Title Index, and Chronological List of Papers Index. These indexes provide a clear, easy-to-read, and concise method of searching for and

The Risk Assessment Study for Electric Power Marketing Competitiveness Based on Cloud Model and TOPSIS

NASA Astrophysics Data System (ADS)

Li, Cunbin; Wang, Yi; Lin, Shuaishuai

2017-09-01

With the rapid development of the energy internet and the deepening of the electric power reform, the traditional marketing mode of electric power does not apply to most of electric power enterprises, so must seek a breakthrough, however, in the face of increasingly complex marketing information, how to make a quick, reasonable transformation, makes the electric power marketing competitiveness assessment more accurate and objective becomes a big problem. In this paper, cloud model and TOPSIS method is proposed. Firstly, build the electric power marketing competitiveness evaluation index system. Then utilize the cloud model to transform the qualitative evaluation of the marketing data into quantitative values and use the entropy weight method to weaken the subjective factors of evaluation index weight. Finally, by TOPSIS method the closeness degrees of alternatives are obtained. This method provides a novel solution for the electric power marketing competitiveness evaluation. Through the case analysis the effectiveness and feasibility of this model are verified.

Evaluation of apoptosis indexes in currently used oral alpha- blockers in prostate: a pilot study

PubMed Central

Demir, Mehmet; Akin, Yigit; Terim, Kubra Asena Kapakin; Gulum, Mehmet; Buyukfirat, Evren; Ciftci, Halil; Yeni, Ercan

2018-01-01

ABSTRACT Objectives: Apoptosis effect of oral alpha-blockers is known in the prostate. Apoptosis index of silodosin has not been proved, yet. Aims are to present apoptosis index of silodosin in prostate and to compare this with other currently used alpha-blocker's apoptosis indexes together with their clinical effects. Materials and Methods: Benign prostatic hyperplasia (BPH) patients were enrolled among those admitted to urology outpatient clinic between June 2014 and June 2015. Study groups were created according to randomly prescribed oral alpha-blocker drugs as silodosin 8mg (Group 1; n=24), tamsulosin 0.4mg (Group 2; n=30), alfuzosin 10mg (Group 3; n=25), doxazosin 8mg (Group 4; n=22), terazosin 5mg (Group 5; n=15). Pa- tients who refused to use any alpha-blocker drug were included into Group 6 as control group (n=16). We investigated apoptosis indexes of the drugs in prostatic tissues that were taken from patient's surgery (transurethral resection of prostate) and/or prostate biopsies. Immunochemical dyeing, light microscope, and Image Processing and Analy- sis in Java were used for evaluations. Statistical significant p was p<0.05. Results: There were 132 patients with mean follow-up of 4.2±2.1 months. Pathologist researched randomly selected 10 areas in each microscope set. Group 1 showed statisti- cal significant difference apoptosis index in immunochemical TUNEL dyeing and im- age software (p<0.001). Moreover, we determined superior significant development in parameters as uroflowmetry, quality of life scores, and international prostate symptom score in Group 1. Conclusions: Silodosin has higher apoptosis effect than other alpha-blockers in prostate. Thus, clinic improvement with silodosin was proved by histologic studies. Besides, static factor of BPH may be overcome with creating apoptosis. PMID:29617082

Focus modulation of cylindrical vector beams by using 1D photonic crystal lens with negative refraction effect.

PubMed

Xu, Ji; Zhong, Yi; Wang, Shengming; Lu, Yunqing; Wan, Hongdan; Jiang, Jian; Wang, Jin

2015-10-19

Sub-wavelength focusing of cylindrical vector beams (CVBs) has attracted great attention due to the specific physical effects and the applications in many areas. More powerful, flexible and effective ways to modulate the focus transversally and also longitudinally are always being pursued. In this paper, cylindrically symmetric lens composed of negative-index one-dimensional photonic crystal is proposed to make a breakthrough. By revealing the relationship between focal length and the exit surface shape of the lens, a quite simple and effective principle of designing the lens structure is presented to realize specific focus modulation. Plano-concave lenses are parameterized to modulate the focal length and the number of focuses. An axicon constructed by one-dimensional photonic crystal is proposed for the first time to obtain a large depth of focus and an optical needle focal field with almost a theoretical minimum FWHM of 0.362λ is achieved under radially polarized incident light. Because of the almost identical negative refractive index for TE and TM polarization states, all the modulation methods can be applied for any arbitrary polarized CVBs. This work offers a promising methodology for designing negative-index lenses in related application areas.

Effective DQE (eDQE) for monoscopic and stereoscopic chest radiography imaging systems with the incorporation of anatomical noise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyce, Sarah J.; Choudhury, Kingshuk Roy; Samei, Ehsan

2013-09-15

Purpose: Stereoscopic chest biplane correlation imaging (stereo/BCI) has been proposed as an alternative modality to single view chest x-ray (CXR). The metrics effective modulation transfer function (eMTF), effective normalized noise power spectrum (eNNPS), and effective detective quantum efficiency (eDQE) have been proposed as clinically relevant metrics for assessing clinical system performance taking into consideration the magnification and scatter effects. This study compared the metrics eMTF, eNNPS, eDQE, and detectability index for stereo/BCI and single view CXR under isodose conditions at two magnifications for two anthropomorphic phantoms of differing sizes.Methods: Measurements for the eMTF were taken for two phantom sizes withmore » an opaque edge test device using established techniques. The eNNPS was measured at two isodose conditions for two phantoms using established techniques. The scatter was measured for two phantoms using an established beam stop method. All measurements were also taken at two different magnifications with two phantoms. A geometrical phantom was used for comparison with prior results for CXR although the results for an anatomy free phantom are not expected to vary for BCI.Results: Stereo/BCI resulted in improved metrics compared to single view CXR. Results indicated that magnification can potentially improve the detection performance primarily due to the air gap which reduced scatter by ∼20%. For both phantoms, at isodose, eDQE(0) for stereo/BCI was ∼100 times higher than that for CXR. Magnification at isodose improved eDQE(0) by ∼10 times for stereo/BCI. Increasing the dose did not improve eDQE. The detectability index for stereo/BCI was ∼100 times better than single view CXR for all conditions. The detectability index was also not improved with increased dose.Conclusions: The findings indicate that stereo/BCI with magnification may improve detectability of subtle lung nodules compared to single view CXR. Results were improved with magnification for the smaller phantom but not for the larger phantom. The effective DQE and the detectability index did not improve with increasing dose.« less

Initial Teacher Training to Promote Health and Well-Being in Schools--A Systematic Review of Effectiveness, Barriers and Facilitators

ERIC Educational Resources Information Center

Shepherd, Jonathan; Pickett, Karen; Dewhirst, Sue; Byrne, Jenny; Speller, Viv; Grace, Marcus; Almond, Palo; Roderick, Paul

2016-01-01

Objectives: To conduct a systematic review of effectiveness, and barriers and facilitators, of initial teacher training to promote health and well-being in schools. Design: Systematic review of the literature. Method: A total of 20 bibliographic databases were searched, including MEDLINE, EMBASE and the Social Science Citation Index. Studies were…

Effect of one low thinning on cove and slope hardwoods in the New Jersey highlands

Treesearch

H. B. Tepper; G. T. Bamford

1959-01-01

The exact value of thinning in managing hardwoods is not yet known. Further study of the many factors that affect thinning results is needed. These factors include methods and intensities of thinning, ages at which thinnings are started or repeated, effects of species composition in mixed stands, and influence of site index on response to thinning.

Long-Term Effects of Methylphenidate Transdermal Delivery System Treatment of ADHD on Growth

ERIC Educational Resources Information Center

Faraone, Stephen V.; Giefer, Eldred E.

2007-01-01

Objective: To examine the long-term effects of the methylphenidate transdermal system (MTS) on the growth of children being treated for attention-deficit/hyperactivity disorder. Method: Height, weight, and body mass index (BMI) were measured in 127 children ages 6 to 12 at longitudinal assessments for up to 36 months of treatment with MTS. These…

Mediating Effect of Body Image Distortion on Weight Loss Efforts in Normal-Weight and Underweight Korean Adolescent Girls

ERIC Educational Resources Information Center

Choi, Jeong-Sil; Kim, Ji-Soo

2017-01-01

Background: We explored the relationship between body mass index-for-age percentile, body image distortion, and unnecessary weight loss efforts in Korean adolescent girls who are underweight and normal weight and examined the mediating effect of body image distortion on weight loss efforts. Methods: This study used data from the 2013 Korea Youth…

Development of Dimensionless Index Assessing Low Impact Development in Urban Areas

NASA Astrophysics Data System (ADS)

Jun, S. H.; Lee, E. H.; Kim, J. H.

2017-12-01

Because the rapid urbanization and industrialization have increased the impervious area of watersheds, inundation in urban area and water pollution of river by non-point pollutants have caused serious problems for a long time. Low Impact Development (LID) techniques have been implemented for the solution of these problems due to its cost effectiveness for mitigating the water quality and quantity impact on urban areas. There have been many studies about the effectiveness of LID, but there is a lack of research on developing an index for the assessment of LID performance. In this study, the dimensionless reliability index of LID is proposed. The index is developed using Distance Measure Method (DMM). DMM is used to consider the parameters that have different units. The parameters for reliability of LID are the amount of pollutant at the outfall and the flooding volume. Both parameters become dimensionless index by DMM. Weighted factors in dimensionless index are considered to realize the behavior of reliability for the variation of importance to the parameters. LID is applied to an actual area called Gasan city in Seoul, South Korea where inundation is frequently occurred. The reliability is estimated for 16 different rainfall events. For each rainfall event, the parameters with LID installation are compared with those of no LID installation. Depending on which parameter is considered more important, the results showed difference. In conclusion, the optimal locations of LID are suggested as the weighted factors change.

PQScal (Power Quality Score Calculation for Distribution Systems with DER Integration)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Power Quality is of great importance to evaluate the “health” of a distribution system, especially when the distributed energy resource (DER) penetration becomes more significant. The individual components that make up power quality, such as voltage magnitude and unbalance, can be measured in simulations or in the field, however, a comprehensive method to incorporate all of these values into a single score doesn't exist. As a result, we propose a methodology to quantify the power quality health using the single number value, named as Power Quality Score (PQS). The PQS is dependent on six metrics that are developed based onmore » both components that directly impact power quality and those are often reference in the context of power quality. These six metrics are named as System Average Voltage Magnitude Violation Index (SAVMVI), System Average Voltage Fluctuation Index (SAVFI), System Average Voltage Unbalance Index (SAVUI), System Control Device Operation Index (SCDOI), System Reactive Power Demand Index (SRPDI) and System Energy Loss Index (SELI). This software tool, PQScal, is developed based on this novel PQS methodology. Besides of traditional distribution systems, PQScal can also measure the power quality for distribution systems with various DER penetrations. PQScal has been tested on two utility distribution feeders with distinct model characteristics and its effectiveness has been proved. In sum, PQScal can help utilities or other parties to measure the power quality of distribution systems with DER integration easily and effectively.« less

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

NASA Astrophysics Data System (ADS)

Li, Hui; Liu, Zhi-qiang; Ou, Jin-ping

2007-12-01

It has been proven that carbon-fiber-reinforced polymer (CFRP) sheets or plates are capable of improving the strength of reinforced concrete (RC) structures. However, residual deformation of RC structures in service reduces the effect of CFRP strengthening. SMA can be applied to potentially decrease residual deformation and even close concrete cracks because of its recovery forces imposed on the concrete when heated. Therefore, a method of a RC structure strengthened by CFRP plates in combination with SMA wires is proposed in this paper. The strengthening effect of this method is investigated through experiments and numerical study based on the nonlinear finite element software ABAQUS in simple RC beams. Parametric analysis and assessment of damage by defining a damage index are carried out. The results indicate that recovery forces of SMA wires can decrease deflections and even close cracks in the concrete. The recovery rate of deflection of the beam increases with increasing the ratio of SMA wires. The specimen strengthened with CFRP plates has a relatively large stiffness and smaller damage index value when the residual deformation of the beam is first reduced by activation of the SMA wires. The effectiveness of this strengthening method for RC beams is verified by experimental and numerical results.

Estimating red pine site index in northern Minnesota.

Treesearch

1976-01-01

Methods are presented for estimating red pine site index from the height growth of red pine, site index of several associated species (jack pine, white pine, white spruce, or quaking aspen), and from easily measured soil properties. The restrictions and limitations of each method and their relative precision are discussed.

The effect of nopal (Opuntia ficus indica) on postprandial blood glucose, incretins, and antioxidant activity in Mexican patients with type 2 diabetes after consumption of two different composition breakfasts.

PubMed

López-Romero, Patricia; Pichardo-Ontiveros, Edgar; Avila-Nava, Azalia; Vázquez-Manjarrez, Natalia; Tovar, Armando R; Pedraza-Chaverri, José; Torres, Nimbe

2014-11-01

Nopal is a plant used in traditional Mexican medicine to treat diabetes. However, there is insufficient scientific evidence to demonstrate whether nopal can regulate postprandial glucose. The purpose for conducting this study was to evaluate the glycemic index, insulinemic index, glucose-dependent insulinotropic peptide (GIP) index, and the glucagon-like peptide 1 (GLP-1) index, and the effect of nopal on patients with type 2 diabetes after consumption of a high-carbohydrate breakfast (HCB) or high-soy-protein breakfast (HSPB) on the postprandial response of glucose, insulin, GIP, GLP-1, and antioxidant activity. In study 1, the glycemic index, insulinemic index, GIP index, and GLP-1 index were calculated for seven healthy participants who consumed 50 g of available carbohydrates from glucose or dehydrated nopal. In study 2, 14 patients with type 2 diabetes consumed nopal in HCB or HSPB with or without 300 g steamed nopal. The glycemic index of nopal was 32.5±4, insulinemic index was 36.1±6, GIP index was 6.5±3.0, and GLP-1 index was 25.9±18. For those patients with type 2 diabetes who consumed the HCB+nopal, there was significantly lower area under the curve for glucose (287±30) than for those who consumed the HCB only (443±49), and lower incremental area under the curve for insulin (5,952±833 vs 7,313±1,090), and those patients with type 2 diabetes who consumed the HSPB avoided postprandial blood glucose peaks. Consumption of the HSPB+nopal significantly reduced the postprandial peaks of GIP concentration at 30 and 45 minutes and increased the antioxidant activity after 2 hours measured by the 2,2-diphenyl-1-picrilhidracyl method. These findings suggest that nopal could reduce postprandial blood glucose, serum insulin, and plasma GIP peaks, as well as increase antioxidant activity in healthy people and patients with type 2 diabetes. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Glycemic index of sweetpotato as affected by cooking methods

USDA-ARS?s Scientific Manuscript database

Understanding the effect of cooking on glucose availability will aid in the recommendation for including sweet potatoes as a regular component in American diets. Heating breaks down starch granules to allow amylopectin and amylose to be more readily digested by pancreatic amylase, which theoreticall...

Using Electroencephalography to Measure Cognitive Load

ERIC Educational Resources Information Center

Antonenko, Pavlo; Paas, Fred; Grabner, Roland; van Gog, Tamara

2010-01-01

Application of physiological methods, in particular electroencephalography (EEG), offers new and promising approaches to educational psychology research. EEG is identified as a physiological index that can serve as an online, continuous measure of cognitive load detecting subtle fluctuations in instantaneous load, which can help explain effects of…