Starting Point: Pedagogic Resources for Teaching and Learning Economics

ERIC Educational Resources Information Center

Maier, Mark H.; McGoldrick, KimMarie; Simkins, Scott P.

2012-01-01

This article describes Starting Point: Teaching and Learning Economics, a Web-based portal that makes innovative pedagogic resources and effective teaching practices easily accessible to economists. Starting Point introduces economists to teaching innovations through 16 online modules, each containing a general description of a specific pedagogic…

Solar Water Splitting at λ=600 nm: A Step Closer to Sustainable Hydrogen Production.

PubMed

Zhang, Jinshui; Wang, Xinchen

2015-06-15

Overall water splitting with a semiconductor photocatalyst under visible-light irradiation is considered as a "dream reaction" in chemistry. The development of a 600 nm photocatalyst for solar water splitting highlighted here is not only an important milestone towards sustainable hydrogen production, but also a new starting point for artificial photosynthesis. STH=solar-to-hydrogen energy conversion efficiency. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Rapid Python-Based Methodology for Target-Focused Combinatorial Library Design.

PubMed

Li, Shiliang; Song, Yuwei; Liu, Xiaofeng; Li, Honglin

2016-01-01

The chemical space is so vast that only a small portion of it has been examined. As a complementary approach to systematically probe the chemical space, virtual combinatorial library design has extended enormous impacts on generating novel and diverse structures for drug discovery. Despite the favorable contributions, high attrition rates in drug development that mainly resulted from lack of efficacy and side effects make it increasingly challenging to discover good chemical starting points. In most cases, focused libraries, which are restricted to particular regions of the chemical space, are deftly exploited to maximize hit rate and improve efficiency at the beginning of the drug discovery and drug development pipeline. This paper presented a valid methodology for fast target-focused combinatorial library design in both reaction-based and production-based ways with the library creating rates of approximately 70,000 molecules per second. Simple, quick and convenient operating procedures are the specific features of the method. SHAFTS, a hybrid 3D similarity calculation software, was embedded to help refine the size of the libraries and improve hit rates. Two target-focused (p38-focused and COX2-focused) libraries were constructed efficiently in this study. This rapid library enumeration method is portable and applicable to any other targets for good chemical starting points identification collaborated with either structure-based or ligand-based virtual screening.

Ultra-Efficient and Power Dense Electric Motors for U. S. Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melfi, Michael J.; Schiferl, Richard F.; Umans, Stephen D.

2013-03-12

The primary purpose of this project was to combine the ease-of-installation and ease-of-use attributes of industrial induction motors with the low-loss and small size and weight advantages of PM motors to create an ultra-efficient, high power density industrial motor that can be started across-the-line or operated from a standard, Volts/Hertz drive without the need for a rotor position feedback device. PM motor products that are currently available are largely variable speed motors that require a special adjustable speed drive with rotor position feedback. The reduced size and weight helps to offset the magnet cost in order make these motors commerciallymore » viable. The scope of this project covers horsepower ratings from 20 ? 500. Prototypes were built and tested at ratings ranging from 30 to 250 HP. Since fans, pumps and compressors make up a large portion of industrial motor applications, the motor characteristics are tailored to those applications. Also, since there is extensive use of adjustable frequency inverters in these applications, there is the opportunity to design for an optimal pole number and operate at other than 60 Hz frequency when inverters are utilized. Designs with four and eight pole configurations were prototyped as part of this work. Four pole motors are the most commonly used configuration in induction motors today. The results of the prototype design, fabrication, and testing were quite successful. The 50 HP rating met all of the design goals including efficiency and power density. Tested values of motor losses at 50 HP were 30% lower than energy efficient induction motors and the motor weight is 35% lower than the energy efficient induction motor of the same rating. Further, when tested at the 30 HP rating that is normally built in this 286T frame size, the efficiency far exceeds the project design goals with 30 HP efficiency levels indicating a 55% reduction in loss compared to energy efficient motors with a motor weight that is a few percentage points lower than the energy efficient motor. This 30 HP rating full load efficiency corresponds to a 46% reduction in loss compared to a 30 HP NEMA Premium? efficient motor. The cost goals were to provide a two year or shorter efficiency-based payback of a price premium associated with the magnet cost in these motors. That goal is based on 24/7 operation with a cost of electricity of 10 cents per kW-hr. Similarly, the 250 HP prototype efficiency testing was quite successful. In this case, the efficiency was maximized with a slightly less aggressive reduction in active material. The measured full load efficiency of 97.6% represents in excess of a 50% loss reduction compared to the equivalent NEMA Premium Efficiency induction motor. The active material weight reduction was a respectable 14.5% figure. This larger rating demonstrated both the scalability of this technology and also the ability to flexibly trade off power density and efficiency. In terms of starting performance, the 30 ? 50 HP prototypes were very extensively tested. The demonstrated capability included the ability to successfully start a load with an inertia of 25 times the motor?s own inertia while accelerating against a load torque following a fan profile at the motor?s full nameplate power rating. This capability will provide very wide applicability of this motor technology. The 250 HP prototype was also tested for starting characteristics, though without a coupled inertia and load torque. As a result it was not definitively proven that the same 25 times the motor?s own inertia could be started and synchronized successfully at 250 HP. Finite element modeling implies that this load could be successfully started, but it has not yet been confirmed by a test.« less

A comparative study of controlled random search algorithms with application to inverse aerofoil design

NASA Astrophysics Data System (ADS)

Manzanares-Filho, N.; Albuquerque, R. B. F.; Sousa, B. S.; Santos, L. G. C.

2018-06-01

This article presents a comparative study of some versions of the controlled random search algorithm (CRSA) in global optimization problems. The basic CRSA, originally proposed by Price in 1977 and improved by Ali et al. in 1997, is taken as a starting point. Then, some new modifications are proposed to improve the efficiency and reliability of this global optimization technique. The performance of the algorithms is assessed using traditional benchmark test problems commonly invoked in the literature. This comparative study points out the key features of the modified algorithm. Finally, a comparison is also made in a practical engineering application, namely the inverse aerofoil shape design.

InSilico DB genomic datasets hub: an efficient starting point for analyzing genome-wide studies in GenePattern, Integrative Genomics Viewer, and R/Bioconductor.

PubMed

Coletta, Alain; Molter, Colin; Duqué, Robin; Steenhoff, David; Taminau, Jonatan; de Schaetzen, Virginie; Meganck, Stijn; Lazar, Cosmin; Venet, David; Detours, Vincent; Nowé, Ann; Bersini, Hugues; Weiss Solís, David Y

2012-11-18

Genomics datasets are increasingly useful for gaining biomedical insights, with adoption in the clinic underway. However, multiple hurdles related to data management stand in the way of their efficient large-scale utilization. The solution proposed is a web-based data storage hub. Having clear focus, flexibility and adaptability, InSilico DB seamlessly connects genomics dataset repositories to state-of-the-art and free GUI and command-line data analysis tools. The InSilico DB platform is a powerful collaborative environment, with advanced capabilities for biocuration, dataset sharing, and dataset subsetting and combination. InSilico DB is available from https://insilicodb.org.

A Collection of Technical Studies Completed for the Computer-Aided Acquisition and Logistic Support (CALS) Program Fiscal Year 1988. Volume 3. CGM Registration

DTIC Science & Technology

1991-03-01

the array are used cyclically, that is when the end of the array is reached, the pattern starts over at the beginning. Dashed lines wrap around curves...the dash pattern relative to the start of the path. It is interpreted as a .distance into the dash pattern at which the pattern should be started ...cubic seldom Is drawn using the four points specified. The curve starts at the first point and ends at the fourth point; the second and third point are

Natural occupation numbers in two-electron quantum rings.

PubMed

Tognetti, Vincent; Loos, Pierre-François

2016-02-07

Natural orbitals (NOs) are central constituents for evaluating correlation energies through efficient approximations. Here, we report the closed-form expression of the NOs of two-electron quantum rings, which are prototypical finite-extension systems and new starting points for the development of exchange-correlation functionals in density functional theory. We also show that the natural occupation numbers for these two-electron paradigms are in general non-vanishing and follow the same power law decay as atomic and molecular two-electron systems.

A Synchronous Digital Duplexing Technique for OFDMA-Based Indoor Communications

NASA Astrophysics Data System (ADS)

Park, Chang-Hwan; Ko, Yo-Han; Kim, Yeong-Jun; Park, Kyung-Won; Jeon, Won-Gi; Paik, Jong-Ho; Lee, Seok-Pil; Cho, Yong-Soo

In this paper, we propose a new digital duplexing scheme, called synchronous digital duplexing (SDD), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously in wireless communication. In order to transmit uplink and downlink signals simultaneously, the proposed SDD obtains mutual information among subscriber stations (SSs) with a mutual ranging symbol. This information is used for selection of transmission time, decision on cyclic suffix (CS) insertion, determination of CS length, and re-establishment of FFT starting point.

Natural occupation numbers in two-electron quantum rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tognetti, Vincent, E-mail: vincent.tognetti@univ-rouen.fr; Loos, Pierre-François

2016-02-07

Natural orbitals (NOs) are central constituents for evaluating correlation energies through efficient approximations. Here, we report the closed-form expression of the NOs of two-electron quantum rings, which are prototypical finite-extension systems and new starting points for the development of exchange-correlation functionals in density functional theory. We also show that the natural occupation numbers for these two-electron paradigms are in general non-vanishing and follow the same power law decay as atomic and molecular two-electron systems.

Band-edge positions in G W : Effects of starting point and self-consistency

NASA Astrophysics Data System (ADS)

Chen, Wei; Pasquarello, Alfredo

2014-10-01

We study the effect of starting point and self-consistency within G W on the band-edge positions of semiconductors and insulators. Compared to calculations based on a semilocal starting point, the use of a hybrid-functional starting point shows a larger quasiparticle correction for both band-edge states. When the self-consistent treatment is employed, the band-gap opening is found to result mostly from a shift of the valence-band edge. Within the non-self-consistent methods, we analyse the performance of empirical and nonempirical schemes in which the starting point is optimally tuned. We further assess the accuracy of the band-edge positions through the calculation of ionization potentials of surfaces. The ionization potentials for most systems are reasonably well described by one-shot calculations. However, in the case of TiO2, we find that the use of self-consistency is critical to obtain a good agreement with experiment.

Computational methods for efficient structural reliability and reliability sensitivity analysis

NASA Technical Reports Server (NTRS)

Wu, Y.-T.

1993-01-01

This paper presents recent developments in efficient structural reliability analysis methods. The paper proposes an efficient, adaptive importance sampling (AIS) method that can be used to compute reliability and reliability sensitivities. The AIS approach uses a sampling density that is proportional to the joint PDF of the random variables. Starting from an initial approximate failure domain, sampling proceeds adaptively and incrementally with the goal of reaching a sampling domain that is slightly greater than the failure domain to minimize over-sampling in the safe region. Several reliability sensitivity coefficients are proposed that can be computed directly and easily from the above AIS-based failure points. These probability sensitivities can be used for identifying key random variables and for adjusting design to achieve reliability-based objectives. The proposed AIS methodology is demonstrated using a turbine blade reliability analysis problem.

Massively parallel multicanonical simulations

NASA Astrophysics Data System (ADS)

Gross, Jonathan; Zierenberg, Johannes; Weigel, Martin; Janke, Wolfhard

2018-03-01

Generalized-ensemble Monte Carlo simulations such as the multicanonical method and similar techniques are among the most efficient approaches for simulations of systems undergoing discontinuous phase transitions or with rugged free-energy landscapes. As Markov chain methods, they are inherently serial computationally. It was demonstrated recently, however, that a combination of independent simulations that communicate weight updates at variable intervals allows for the efficient utilization of parallel computational resources for multicanonical simulations. Implementing this approach for the many-thread architecture provided by current generations of graphics processing units (GPUs), we show how it can be efficiently employed with of the order of 104 parallel walkers and beyond, thus constituting a versatile tool for Monte Carlo simulations in the era of massively parallel computing. We provide the fully documented source code for the approach applied to the paradigmatic example of the two-dimensional Ising model as starting point and reference for practitioners in the field.

Fragment library design: using cheminformatics and expert chemists to fill gaps in existing fragment libraries.

PubMed

Kutchukian, Peter S; So, Sung-Sau; Fischer, Christian; Waller, Chris L

2015-01-01

Fragment based screening (FBS) has emerged as a mainstream lead discovery strategy in academia, biotechnology start-ups, and large pharma. As a prerequisite of FBS, a structurally diverse library of fragments is desirable in order to identify chemical matter that will interact with the range of diverse target classes that are prosecuted in contemporary screening campaigns. In addition, it is also desirable to offer synthetically amenable starting points to increase the probability of a successful fragment evolution through medicinal chemistry. Herein we describe a method to identify biologically relevant chemical substructures that are missing from an existing fragment library (chemical gaps), and organize these chemical gaps hierarchically so that medicinal chemists can efficiently navigate the prioritized chemical space and subsequently select purchasable fragments for inclusion in an enhanced fragment library.

An Invitation to Open Innovation in Malaria Drug Discovery: 47 Quality Starting Points from the TCAMS.

PubMed

Calderón, Félix; Barros, David; Bueno, José María; Coterón, José Miguel; Fernández, Esther; Gamo, Francisco Javier; Lavandera, José Luís; León, María Luisa; Macdonald, Simon J F; Mallo, Araceli; Manzano, Pilar; Porras, Esther; Fiandor, José María; Castro, Julia

2011-10-13

In 2010, GlaxoSmithKline published the structures of 13533 chemical starting points for antimalarial lead identification. By using an agglomerative structural clustering technique followed by computational filters such as antimalarial activity, physicochemical properties, and dissimilarity to known antimalarial structures, we have identified 47 starting points for lead optimization. Their structures are provided. We invite potential collaborators to work with us to discover new clinical candidates.

Long-term stability of microcrystalline silicon p-i-n solar cells exposed to sun light

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanguino, P.; Koynov, S.; Schwarz, R.

1999-07-01

The performance of an entirely microcrystalline p-i-n solar cell was monitored during a long-term outdoor test in Lisbon starting in September 1998. A small decrease of the short circuit current was observed after 5 months of operation. The open-circuit voltage remained stable around 400 mV. From the analysis of the I-V characteristic in dark and under illumination they could identify the weak points of the test structure, like large series resistance, high recombination rate, and intensity-dependent collection efficiency.

Film Condensation of Steam on Externally Finned Horizontal Tubes.

DTIC Science & Technology

1985-03-01

Thermal Conductivity of Tube/Fin Metal i" ir - Condensation Rate Nu - Nusselt Number PA’ PB’ PC - Pressure at Points A, B, and C in Figure 2.1 APAB’ PcB...single finned tubes. To predict the film coefficients, they started with the Nusselt equations for condensation on a horizontal tube and on a vertical... Nusselt equation was obtained. A " condensation efficiency" was then proposed to account for a variable fin temperature, and was defined as: C, F1 (2.18) 3

Impacts of visuomotor sequence learning methods on speed and accuracy: Starting over from the beginning or from the point of error.

PubMed

Tanaka, Kanji; Watanabe, Katsumi

2016-02-01

The present study examined whether sequence learning led to more accurate and shorter performance time if people who are learning a sequence start over from the beginning when they make an error (i.e., practice the whole sequence) or only from the point of error (i.e., practice a part of the sequence). We used a visuomotor sequence learning paradigm with a trial-and-error procedure. In Experiment 1, we found fewer errors, and shorter performance time for those who restarted their performance from the beginning of the sequence as compared to those who restarted from the point at which an error occurred, indicating better learning of spatial and motor representations of the sequence. This might be because the learned elements were repeated when the next performance started over from the beginning. In subsequent experiments, we increased the occasions for the repetitions of learned elements by modulating the number of fresh start points in the sequence after errors. The results showed that fewer fresh start points were likely to lead to fewer errors and shorter performance time, indicating that the repetitions of learned elements enabled participants to develop stronger spatial and motor representations of the sequence. Thus, a single or two fresh start points in the sequence (i.e., starting over only from the beginning or from the beginning or midpoint of the sequence after errors) is likely to lead to more accurate and faster performance. Copyright © 2016 Elsevier B.V. All rights reserved.

An optimization program based on the method of feasible directions: Theory and users guide

NASA Technical Reports Server (NTRS)

Belegundu, Ashok D.; Berke, Laszlo; Patnaik, Surya N.

1994-01-01

The theory and user instructions for an optimization code based on the method of feasible directions are presented. The code was written for wide distribution and ease of attachment to other simulation software. Although the theory of the method of feasible direction was developed in the 1960's, many considerations are involved in its actual implementation as a computer code. Included in the code are a number of features to improve robustness in optimization. The search direction is obtained by solving a quadratic program using an interior method based on Karmarkar's algorithm. The theory is discussed focusing on the important and often overlooked role played by the various parameters guiding the iterations within the program. Also discussed is a robust approach for handling infeasible starting points. The code was validated by solving a variety of structural optimization test problems that have known solutions obtained by other optimization codes. It has been observed that this code is robust: it has solved a variety of problems from different starting points. However, the code is inefficient in that it takes considerable CPU time as compared with certain other available codes. Further work is required to improve its efficiency while retaining its robustness.

Continuous Human Action Recognition Using Depth-MHI-HOG and a Spotter Model

PubMed Central

Eum, Hyukmin; Yoon, Changyong; Lee, Heejin; Park, Mignon

2015-01-01

In this paper, we propose a new method for spotting and recognizing continuous human actions using a vision sensor. The method is comprised of depth-MHI-HOG (DMH), action modeling, action spotting, and recognition. First, to effectively separate the foreground from background, we propose a method called DMH. It includes a standard structure for segmenting images and extracting features by using depth information, MHI, and HOG. Second, action modeling is performed to model various actions using extracted features. The modeling of actions is performed by creating sequences of actions through k-means clustering; these sequences constitute HMM input. Third, a method of action spotting is proposed to filter meaningless actions from continuous actions and to identify precise start and end points of actions. By employing the spotter model, the proposed method improves action recognition performance. Finally, the proposed method recognizes actions based on start and end points. We evaluate recognition performance by employing the proposed method to obtain and compare probabilities by applying input sequences in action models and the spotter model. Through various experiments, we demonstrate that the proposed method is efficient for recognizing continuous human actions in real environments. PMID:25742172

Simple vertex correction improves G W band energies of bulk and two-dimensional crystals

NASA Astrophysics Data System (ADS)

Schmidt, Per S.; Patrick, Christopher E.; Thygesen, Kristian S.

2017-11-01

The G W self-energy method has long been recognized as the gold standard for quasiparticle (QP) calculations of solids in spite of the fact that the neglect of vertex corrections and the use of a density-functional theory starting point lack rigorous justification. In this work we remedy this situation by including a simple vertex correction that is consistent with a local-density approximation starting point. We analyze the effect of the self-energy by splitting it into short-range and long-range terms which are shown to govern, respectively, the center and size of the band gap. The vertex mainly improves the short-range correlations and therefore has a small effect on the band gap, while it shifts the band gap center up in energy by around 0.5 eV, in good agreement with experiments. Our analysis also explains how the relative importance of short- and long-range interactions in structures of different dimensionality is reflected in their QP energies. Inclusion of the vertex comes at practically no extra computational cost and even improves the basis set convergence compared to G W . Taken together, the method provides an efficient and rigorous improvement over the G W approximation.

Delaunay based algorithm for finding polygonal voids in planar point sets

NASA Astrophysics Data System (ADS)

Alonso, R.; Ojeda, J.; Hitschfeld, N.; Hervías, C.; Campusano, L. E.

2018-01-01

This paper presents a new algorithm to find under-dense regions called voids inside a 2D point set. The algorithm starts from terminal-edges (local longest-edges) in a Delaunay triangulation and builds the largest possible low density terminal-edge regions around them. A terminal-edge region can represent either an entire void or part of a void (subvoid). Using artificial data sets, the case of voids that are detected as several adjacent subvoids is analyzed and four subvoid joining criteria are proposed and evaluated. Since this work is inspired on searches of a more robust, effective and efficient algorithm to find 3D cosmological voids the evaluation of the joining criteria considers this context. However, the design of the algorithm permits its adaption to the requirements of any similar application.

Design of piezoelectric transformer for DC/DC converter with stochastic optimization method

NASA Astrophysics Data System (ADS)

Vasic, Dejan; Vido, Lionel

2016-04-01

Piezoelectric transformers were adopted in recent year due to their many inherent advantages such as safety, no EMI problem, low housing profile, and high power density, etc. The characteristics of the piezoelectric transformers are well known when the load impedance is a pure resistor. However, when piezoelectric transformers are used in AC/DC or DC/DC converters, there are non-linear electronic circuits connected before and after the transformer. Consequently, the output load is variable and due to the output capacitance of the transformer the optimal working point change. This paper starts from modeling a piezoelectric transformer connected to a full wave rectifier in order to discuss the design constraints and configuration of the transformer. The optimization method adopted here use the MOPSO algorithm (Multiple Objective Particle Swarm Optimization). We start with the formulation of the objective function and constraints; then the results give different sizes of the transformer and the characteristics. In other word, this method is looking for a best size of the transformer for optimal efficiency condition that is suitable for variable load. Furthermore, the size and the efficiency are found to be a trade-off. This paper proposes the completed design procedure to find the minimum size of PT in need. The completed design procedure is discussed by a given specification. The PT derived from the proposed design procedure can guarantee both good efficiency and enough range for load variation.

A highly efficient autothermal microchannel reactor for ammonia decomposition: Analysis of hydrogen production in transient and steady-state regimes

NASA Astrophysics Data System (ADS)

Engelbrecht, Nicolaas; Chiuta, Steven; Bessarabov, Dmitri G.

2018-05-01

The experimental evaluation of an autothermal microchannel reactor for H2 production from NH3 decomposition is described. The reactor design incorporates an autothermal approach, with added NH3 oxidation, for coupled heat supply to the endothermic decomposition reaction. An alternating catalytic plate arrangement is used to accomplish this thermal coupling in a cocurrent flow strategy. Detailed analysis of the transient operating regime associated with reactor start-up and steady-state results is presented. The effects of operating parameters on reactor performance are investigated, specifically, the NH3 decomposition flow rate, NH3 oxidation flow rate, and fuel-oxygen equivalence ratio. Overall, the reactor exhibits rapid response time during start-up; within 60 min, H2 production is approximately 95% of steady-state values. The recommended operating point for steady-state H2 production corresponds to an NH3 decomposition flow rate of 6 NL min-1, NH3 oxidation flow rate of 4 NL min-1, and fuel-oxygen equivalence ratio of 1.4. Under these flows, NH3 conversion of 99.8% and H2 equivalent fuel cell power output of 0.71 kWe is achieved. The reactor shows good heat utilization with a thermal efficiency of 75.9%. An efficient autothermal reactor design is therefore demonstrated, which may be upscaled to a multi-kW H2 production system for commercial implementation.

A Systems Framework for Assessing Plumbing Products-Related Water Conservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Alison; Dunham Whitehead, Camilla; Lutz, James

2011-12-02

Reducing the water use of plumbing products—toilets, urinals, faucets, and showerheads —has been a popular conservation measure. Improved technologies have created opportunities for additional conservation in this area. However, plumbing products do not operate in a vacuum. This paper reviews the literature related to plumbing products to determine a systems framework for evaluating future conservation measures using these products. The main framework comprises the following categories: water use efficiency, product components, product performance, source water, energy, and plumbing/sewer infrastructure. This framework for analysis provides a starting point for professionals considering future water conservation measures to evaluate the need for additionalmore » research, collaboration with other standards or codes committees, and attachment of additional metrics to water use efficiency (such as performance).« less

Energy Engineering Analysis Program. Lighting Survey of Selected Buildings, Pine Bluff Arsenal, Pine Bluff, Arkansas. Volume 2A: Appendices

DTIC Science & Technology

1995-06-01

Energy efficient, 30 and 40 watt ballasts are Rapid Start, thermally protected, automatic resetting. Class P, high or low power factor as required...BALLASTS Energy efficient, 30 ana 40 watt Rapic Start, thermally protected, automatic resetting. Class P. high power factor, CEM, sound rated A. unless...BALLASTS Energy efficient, 40 Watt Rapid Start, thermally protected, automatic resetting, Class P, high power factor, CBM, sound rated A, unless

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aartsen, M. G.; Abraham, K.; Ackermann, M.

Observation of a point source of astrophysical neutrinos would be a “smoking gun” signature of a cosmic-ray accelerator. While IceCube has recently discovered a diffuse flux of astrophysical neutrinos, no localized point source has been observed. Previous IceCube searches for point sources in the southern sky were restricted by either an energy threshold above a few hundred TeV or poor neutrino angular resolution. Here we present a search for southern sky point sources with greatly improved sensitivities to neutrinos with energies below 100 TeV. By selecting charged-current ν{sub μ} interacting inside the detector, we reduce the atmospheric background while retainingmore » efficiency for astrophysical neutrino-induced events reconstructed with sub-degree angular resolution. The new event sample covers three years of detector data and leads to a factor of 10 improvement in sensitivity to point sources emitting below 100 TeV in the southern sky. No statistically significant evidence of point sources was found, and upper limits are set on neutrino emission from individual sources. A posteriori analysis of the highest-energy (∼100 TeV) starting event in the sample found that this event alone represents a 2.8 σ deviation from the hypothesis that the data consists only of atmospheric background.« less

Extracting a Whisper from the DIN: A Bayesian-Inductive Approach to Learning an Anticipatory Model of Cavitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kercel, S.W.

1999-11-07

For several reasons, Bayesian parameter estimation is superior to other methods for inductively learning a model for an anticipatory system. Since it exploits prior knowledge, the analysis begins from a more advantageous starting point than other methods. Also, since "nuisance parameters" can be removed from the Bayesian analysis, the description of the model need not be as complete as is necessary for such methods as matched filtering. In the limit of perfectly random noise and a perfect description of the model, the signal-to-noise ratio improves as the square root of the number of samples in the data. Even with themore » imperfections of real-world data, Bayesian methods approach this ideal limit of performance more closely than other methods. These capabilities provide a strategy for addressing a major unsolved problem in pump operation: the identification of precursors of cavitation. Cavitation causes immediate degradation of pump performance and ultimate destruction of the pump. However, the most efficient point to operate a pump is just below the threshold of cavitation. It might be hoped that a straightforward method to minimize pump cavitation damage would be to simply adjust the operating point until the inception of cavitation is detected and then to slightly readjust the operating point to let the cavitation vanish. However, due to the continuously evolving state of the fluid moving through the pump, the threshold of cavitation tends to wander. What is needed is to anticipate cavitation, and this requires the detection and identification of precursor features that occur just before cavitation starts.« less

Turning Points in Even Start Programs. Occasional Paper #4.

ERIC Educational Resources Information Center

Rasinski, Timothy; Padak, Nancy

To investigate the initial experiences of the various Even Start programs, a project developed a survey that was sent to program coordinators in Ohio. It asked open-ended questions to get descriptions and perceptions of situations that preceded turning point events and the turning point events themselves. Data from eight programs highlighted their…

The Underrepresentation of African Americans in Army Combat Arms Branches

DTIC Science & Technology

2014-12-04

a starting point for the Army to determine true causality. This monograph is simply reviewing data and identifying correlation, and based on...correlation, assigning causality based on historical information and scholarly literature. These potential causes are not fact, and provide a starting ...1988 is the starting point for the commissioning statistics. Subject matter experts hypothesized that the number African American officers

Microcomputer keeps watch at Emerald Mine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-04-01

This paper reviews the computerized mine monitoring system set up at the Emerald Mine, SW Pennsylvania, USA. This coal mine has pioneered the automation of many production and safety features and this article covers their work in fire detection and conveyor belt monitoring. A central computer control room can safely watch over the whole underground mining operation using one 25 inch colour monitor. These new data-acquisition systems will lead the way, in the future, to safer move efficient coal mining. Multi-point monitoring of carbon monoxide, heat anomalies, toxic gases and the procedures in conveyor belt operation from start-up to closedown.

Unstructured Euler flow solutions using hexahedral cell refinement

NASA Technical Reports Server (NTRS)

Melton, John E.; Cappuccio, Gelsomina; Thomas, Scott D.

1991-01-01

An attempt is made to extend grid refinement into three dimensions by using unstructured hexahedral grids. The flow solver is developed using the TIGER (topologically Independent Grid, Euler Refinement) as the starting point. The program uses an unstructured hexahedral mesh and a modified version of the Jameson four-stage, finite-volume Runge-Kutta algorithm for integration of the Euler equations. The unstructured mesh allows for local refinement appropriate for each freestream condition, thereby concentrating mesh cells in the regions of greatest interest. This increases the computational efficiency because the refinement is not required to extend throughout the entire flow field.

Large inert-gas thrusters

NASA Technical Reports Server (NTRS)

Kaufman, H. R.; Robinson, R. S.

1981-01-01

Using present technology as a starting point, performance predictions were made for large thrusters. The optimum beam diameter for maximum thruster efficiency was determined for a range of specific impulse. This optimum beam diameter varied greatly with specific impulse, from about 0.6 m at 3000 seconds (and below) to about 4 m at 10,000 seconds with argon, and from about 0.6 m at 2,000 seconds (and below) to about 12 m at 10,000 seconds with Xe. These beams sizes would require much larger thrusters than those presently available, but would offer substantial complexity and cost reductions for large electric propulsion systems.

Hidden costs in the physician-insurer relationship.

PubMed

Cote, Jane; Latham, Claire

2003-01-01

Numerous reports document the frictions in health care funding systems, particularly related to the physician-insurer dyad. Efforts to improve efficient patient care by improving interactions between the physician and insurer are ongoing. This article examines one dimension--relationship quality--and demonstrates how attention to building commitment and trust within the relationship has financial benefits. Using a survey of physician practice personnel, commitment and trust are shown to have a positive influence on financial performance metrics. Commitment and trust antecedents are empirically documented. These antecedents provide a starting point for physician practices seeking to enhance their insurer relationships as a mechanism for improved operations.

The rewritable effects of bonded magnet for large starting torque and high efficiency in the small power single-phase written pole motor

NASA Astrophysics Data System (ADS)

Choi, Jae-Hak; Lee, Sung-Ho

2009-04-01

This paper presents a single-phase written pole motor using a bonded ring magnet for the small power home application. The motor has an exciter pole structure inside the stator and hybrid characteristics of an induction motor and permanent magnet motor. The design parameters and operating characteristics of the hybrid concept motor are investigated to increase starting torque and efficiency, which is most important for the small power home application. Larger starting torque and higher efficiency than those of the conventional induction motor could be obtained by using the rewritable characteristics of bonded magnet on the starting and running conditions.

Brainstorming Themes that Connect Art and Ideas across the Curriculum

ERIC Educational Resources Information Center

Walling, Donovan R.

2006-01-01

Ideas are starting points-for thought, discussion, reading, viewing, writing, and making. The two "brainstorms on paper" presented in this article illustrate how taking an idea and examining it from an artistic point of view can generate thematic starting points to help teachers and students connect the visual arts to ideas that ripple across the…

Road traffic sign detection and classification from mobile LiDAR point clouds

NASA Astrophysics Data System (ADS)

Weng, Shengxia; Li, Jonathan; Chen, Yiping; Wang, Cheng

2016-03-01

Traffic signs are important roadway assets that provide valuable information of the road for drivers to make safer and easier driving behaviors. Due to the development of mobile mapping systems that can efficiently acquire dense point clouds along the road, automated detection and recognition of road assets has been an important research issue. This paper deals with the detection and classification of traffic signs in outdoor environments using mobile light detection and ranging (Li- DAR) and inertial navigation technologies. The proposed method contains two main steps. It starts with an initial detection of traffic signs based on the intensity attributes of point clouds, as the traffic signs are always painted with highly reflective materials. Then, the classification of traffic signs is achieved based on the geometric shape and the pairwise 3D shape context. Some results and performance analyses are provided to show the effectiveness and limits of the proposed method. The experimental results demonstrate the feasibility and effectiveness of the proposed method in detecting and classifying traffic signs from mobile LiDAR point clouds.

Electricity Market Liberalisation and Flexibility of Conventional Generation to Balance Intermittent Renewable Energy - Is It Possible to Stay Competitive?

NASA Astrophysics Data System (ADS)

Linkevics, O.; Ivanova, P.; Balodis, M.

2016-12-01

Intermittent generation (solar PV and wind energy) integration in power production portfolio as well as electricity price fluctuations have changed the running manner of conventional combined heat and power (CHP) plants: the shift from base load operation to running in cyclic modes. These cogeneration power plants are not adapted to new running conditions. The level of CHP plant flexibility should be improved to operate profitably and efficiently from both technical and fuel usage point of view. There are different ways to increase the flexibility of power plants. Before any improvements, the situation at power plants should be evaluated and the weakest points defined. In this publication, such measures are presented on Riga CHP-2 plant example: installation of heat storage tank; extension of operation rang; acceleration of start-ups.

Challenges and opportunities of power systems from smart homes to super-grids.

PubMed

Kuhn, Philipp; Huber, Matthias; Dorfner, Johannes; Hamacher, Thomas

2016-01-01

The world's power systems are facing a structural change including liberalization of markets and integration of renewable energy sources. This paper describes the challenges that lie ahead in this process and points out avenues for overcoming different problems at different scopes, ranging from individual homes to international super-grids. We apply energy system models at those different scopes and find a trade-off between technical and social complexity. Small-scale systems would require technological breakthroughs, especially for storage, but individual agents can and do already start to build and operate such systems. In contrast, large-scale systems could potentially be more efficient from a techno-economic point of view. However, new political frameworks are required that enable long-term cooperation among sovereign entities through mutual trust. Which scope first achieves its breakthrough is not clear yet.

EMPRESS: A European Project to Enhance Process Control Through Improved Temperature Measurement

NASA Astrophysics Data System (ADS)

Pearce, J. V.; Edler, F.; Elliott, C. J.; Rosso, L.; Sutton, G.; Andreu, A.; Machin, G.

2017-08-01

A new European project called EMPRESS, funded by the EURAMET program `European Metrology Program for Innovation and Research,' is described. The 3 year project, which started in the summer of 2015, is intended to substantially augment the efficiency of high-value manufacturing processes by improving temperature measurement techniques at the point of use. The project consortium has 18 partners and 5 external collaborators, from the metrology sector, high-value manufacturing, sensor manufacturing, and academia. Accurate control of temperature is key to ensuring process efficiency and product consistency and is often not achieved to the level required for modern processes. Enhanced efficiency of processes may take several forms including reduced product rejection/waste; improved energy efficiency; increased intervals between sensor recalibration/maintenance; and increased sensor reliability, i.e., reduced amount of operator intervention. Traceability of temperature measurements to the International Temperature Scale of 1990 (ITS-90) is a critical factor in establishing low measurement uncertainty and reproducible, consistent process control. Introducing such traceability in situ (i.e., within the industrial process) is a theme running through this project.

Light-efficient photography.

PubMed

Hasinoff, Samuel W; Kutulakos, Kiriakos N

2011-11-01

In this paper, we consider the problem of imaging a scene with a given depth of field at a given exposure level in the shortest amount of time possible. We show that by 1) collecting a sequence of photos and 2) controlling the aperture, focus, and exposure time of each photo individually, we can span the given depth of field in less total time than it takes to expose a single narrower-aperture photo. Using this as a starting point, we obtain two key results. First, for lenses with continuously variable apertures, we derive a closed-form solution for the globally optimal capture sequence, i.e., that collects light from the specified depth of field in the most efficient way possible. Second, for lenses with discrete apertures, we derive an integer programming problem whose solution is the optimal sequence. Our results are applicable to off-the-shelf cameras and typical photography conditions, and advocate the use of dense, wide-aperture photo sequences as a light-efficient alternative to single-shot, narrow-aperture photography.

A simple and efficient alternative to implementing systematic random sampling in stereological designs without a motorized microscope stage.

PubMed

Melvin, Neal R; Poda, Daniel; Sutherland, Robert J

2007-10-01

When properly applied, stereology is a very robust and efficient method to quantify a variety of parameters from biological material. A common sampling strategy in stereology is systematic random sampling, which involves choosing a random sampling [corrected] start point outside the structure of interest, and sampling relevant objects at [corrected] sites that are placed at pre-determined, equidistant intervals. This has proven to be a very efficient sampling strategy, and is used widely in stereological designs. At the microscopic level, this is most often achieved through the use of a motorized stage that facilitates the systematic random stepping across the structure of interest. Here, we report a simple, precise and cost-effective software-based alternative to accomplishing systematic random sampling under the microscope. We believe that this approach will facilitate the use of stereological designs that employ systematic random sampling in laboratories that lack the resources to acquire costly, fully automated systems.

Simultaneous hydrolysis and fermentation of unprocessed food waste into ethanol using thermophilic anaerobic bacteria.

PubMed

Dhiman, Saurabh Sudha; David, Aditi; Shrestha, Namita; Johnson, Glenn R; Benjamin, Kenneth M; Gadhamshetty, Venkataramana; Sani, Rajesh K

2017-11-01

The one-pot CRUDE (Conversion of Raw and Untreated Disposal into Ethanol) process was developed for simultaneous hydrolysis and fermentation of unprocessed food waste into ethanol using thermophilic (growing at 65°C) anaerobic bacteria. Unlike existing waste to energy technologies, the CRUDE process obviates the need for any pre-treatment or enzyme addition. A High-Temperature-High-Pressure (HTHP) distillation technique was also applied that facilitated efficient use of fermentation medium, inoculum recycling, and in-situ ethanol collection. For material balancing of the process, each characterized component was represented in terms of C-mol. Recovery of 94% carbon at the end confirmed the operational efficiency of CRUDE process. The overall energy retaining efficiency calculated from sugars to ethanol was 1262.7kJdryweightkg -1 of volatile solids using HTHP. These results suggest that the CRUDE process can be a starting point for the development of a commercial ethanol production process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ten best resources on conditional cash transfers.

PubMed

Marshall, Caroline; Hill, Peter S

2015-07-01

The world's economy is in a fragile state. Although cautiously recovering from a global recession, unemployment rates and poverty levels remain high. At the same time, food and fuel crises have resulted in skyrocketing commodity costs, straining household budgets even further than before. In the wake of these financial pressure points, there has been increased focus on social safety net programmes. More recently, Brazil's 'Bolsa Familia' conditional cash transfer (CCT) programme has celebrated its tenth-year anniversary, renewing focus on this particular aspect of social transfer programmes. This essay examines one particular aspect of these social safety net programmes: CCTs. CCT programmes are useful social programmes that have had demonstrable effects on many different populations. However, they are not a 'magic bullet' against poverty, and their image has suffered from unreasonable expectations of their impacts. This 10 best list is an ideal starting point from which a potential user can begin to understand CCTs. There remain significant gaps in the literature behind CCTs, with a particular need for much more research on emerging areas such as impacts on gender, long-term school and health outcomes, methods for increasing efficiency and adapting conditionalities within cultural contexts, among others. However, this list can function as a starting point from which the reader can gain an understanding and appreciation for what we believe to be one of the most innovative social programmes for addressing poverty worldwide. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

Analysis of a Channeled Centerbody Supersonic Inlet for F-15B Flight Research

NASA Technical Reports Server (NTRS)

Ratnayake, Nalin A.

2010-01-01

The Propulsion Flight Test Fixture at the NASA Dryden Flight Research Center is a unique test platform available for use on the NASA F-15B airplane, tail number 836, as a modular host for a variety of aerodynamics and propulsion research. The first experiment that is to be flown on the test fixture is the Channeled Centerbody Inlet Experiment. The objectives of this project at Dryden are twofold: 1) flight evaluation of an innovative new approach to variable geometry for high-speed inlets, and 2) flight validation of channeled inlet performance prediction by complex computational fluid dynamics codes. The inlet itself is a fixed-geometry version of a mixed-compression, variable-geometry, supersonic in- let developed by TechLand Research, Inc. (North Olmsted, Ohio) to improve the efficiency of supersonic flight at off-nominal conditions. The concept utilizes variable channels in the centerbody section to vary the mass flow of the inlet, enabling efficient operation at a range of flight conditions. This study is particularly concerned with the starting characteristics of the inlet. Computational fluid dynamics studies were shown to align well with analytical predictions, showing the inlet to remain unstarted as designed at the primary test point of Mach 1.5 at an equivalent pressure altitude of 29,500 ft local conditions. Mass-flow-related concerns such as the inlet start problem, as well as inlet efficiency in terms of total pressure loss, are assessed using the flight test geometry.

Tracing a Route and Finding a Shortcut: The Working Memory, Motivational, and Personality Factors Involved.

PubMed

Pazzaglia, Francesca; Meneghetti, Chiara; Ronconi, Lucia

2018-01-01

Wayfinding (WF) is the ability to move around efficiently and find the way from a starting point to a destination. It is a component of spatial navigation, a coordinate and goal-directed movement of one's self through the environment. In the present study, the relationship between WF tasks (route tracing and shortcut finding) and individual factors were explored with the hypothesis that WF tasks would be predicted by different types of cognitive, affective, motivational variables, and personality factors. A group of 116 university students (88 F.) were conducted along a route in a virtual environment and then asked first to trace the same route again, and then to find a shortcut between the start and end points. Several instruments assessing visuospatial working memory, mental rotation ability, self-efficacy, spatial anxiety, positive attitude to exploring, and personality traits were administered. The results showed that a latent spatial ability factor (measured with the visuospatial working memory and mental rotations tests) - controlled for gender - predicted route-tracing performance, while self-report measures of anxiety, efficacy, and pleasure in exploring, and some personality traits were more likely to predict shortcut-finding performance. We concluded that both personality and cognitive abilities affect WF performance, but differently, depending on the requirements of the task.

A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noel, Nakita K.; Habisreutinger, Severin N.; Wenger, Bernard

2017-01-01

Perovskite-based photovoltaics have, in recent years, become poised to revolutionise the solar industry. While there have been many approaches taken to the deposition of this material, one-step spin-coating remains the simplest and most widely used method in research laboratories. Although spin-coating is not recognised as the ideal manufacturing methodology, it represents a starting point from which more scalable deposition methods, such as slot-dye coating or ink-jet printing can be developed. Here, we introduce a new, low-boiling point, low viscosity solvent system that enables rapid, room temperature crystallisation of methylammonium lead triiodide perovskite films, without the use of strongly coordinating aproticmore » solvents. Through the use of this solvent, we produce dense, pinhole free films with uniform coverage, high specularity, and enhanced optoelectronic properties. We fabricate devices and achieve stabilised power conversion efficiencies of over 18% for films which have been annealed at 100 degrees C, and over 17% for films which have been dried under vacuum and have undergone no thermal processing. This deposition technique allows uniform coating on substrate areas of up to 125 cm2, showing tremendous promise for the fabrication of large area, high efficiency, solution processed devices, and represents a critical step towards industrial upscaling and large area printing of perovskite solar cells.« less

Detection of inter-turn short-circuit at start-up of induction machine based on torque analysis

NASA Astrophysics Data System (ADS)

Pietrowski, Wojciech; Górny, Konrad

2017-12-01

Recently, interest in new diagnostics methods in a field of induction machines was observed. Research presented in the paper shows the diagnostics of induction machine based on torque pulsation, under inter-turn short-circuit, during start-up of a machine. In the paper three numerical techniques were used: finite element analysis, signal analysis and artificial neural networks (ANN). The elaborated numerical model of faulty machine consists of field, circuit and motion equations. Voltage excited supply allowed to determine the torque waveform during start-up. The inter-turn short-circuit was treated as a galvanic connection between two points of the stator winding. The waveforms were calculated for different amounts of shorted-turns from 0 to 55. Due to the non-stationary waveforms a wavelet packet decomposition was used to perform an analysis of the torque. The obtained results of analysis were used as input vector for ANN. The response of the neural network was the number of shorted-turns in the stator winding. Special attention was paid to compare response of general regression neural network (GRNN) and multi-layer perceptron neural network (MLP). Based on the results of the research, the efficiency of the developed algorithm can be inferred.

Selection of Thermal Worst-Case Orbits via Modified Efficient Global Optimization

NASA Technical Reports Server (NTRS)

Moeller, Timothy M.; Wilhite, Alan W.; Liles, Kaitlin A.

2014-01-01

Efficient Global Optimization (EGO) was used to select orbits with worst-case hot and cold thermal environments for the Stratospheric Aerosol and Gas Experiment (SAGE) III. The SAGE III system thermal model changed substantially since the previous selection of worst-case orbits (which did not use the EGO method), so the selections were revised to ensure the worst cases are being captured. The EGO method consists of first conducting an initial set of parametric runs, generated with a space-filling Design of Experiments (DoE) method, then fitting a surrogate model to the data and searching for points of maximum Expected Improvement (EI) to conduct additional runs. The general EGO method was modified by using a multi-start optimizer to identify multiple new test points at each iteration. This modification facilitates parallel computing and decreases the burden of user interaction when the optimizer code is not integrated with the model. Thermal worst-case orbits for SAGE III were successfully identified and shown by direct comparison to be more severe than those identified in the previous selection. The EGO method is a useful tool for this application and can result in computational savings if the initial Design of Experiments (DoE) is selected appropriately.

Development and evaluation of a web-based application for digital findings and documentation in physiotherapy education.

PubMed

Spieler, Bernadette; Burgsteiner, Harald; Messer-Misak, Karin; Gödl-Purrer, Barbara; Salchinger, Beate

2015-01-01

Findings in physiotherapy have standardized approaches in treatment, but there is also a significant margin of differences in how to implement these standards. Clinical decisions require experience and continuous learning processes to consolidate personal values and opinions and studies suggest that lecturers can influence students positively. Recently, the study course of Physiotherapy at the University of Applied Science in Graz has offered a paper based finding document. This document supported decisions through the adaption of the clinical reasoning process. The document was the starting point for our learning application called "EasyAssess", a Java based web-application for a digital findings documentation. A central point of our work was to ensure efficiency, effectiveness and usability of the web-application through usability tests utilized by both students and lecturers. Results show that our application fulfills the previously defined requirements and can be efficiently used in daily routine largely because of its simple user interface and its modest design. Due to the close cooperation with the study course Physiotherapy, the application has incorporated the various needs of the target audiences and confirmed the usefulness of our application.

International Space Station Increment Operations Services

NASA Astrophysics Data System (ADS)

Michaelis, Horst; Sielaff, Christian

2002-01-01

The Industrial Operator (IO) has defined End-to-End services to perform efficiently all required operations tasks for the Manned Space Program (MSP) as agreed during the Ministerial Council in Edinburgh in November 2001. Those services are the result of a detailed task analysis based on the operations processes as derived from the Space Station Program Implementation Plans (SPIP) and defined in the Operations Processes Documents (OPD). These services are related to ISS Increment Operations and ATV Mission Operations. Each of these End-to-End services is typically characterised by the following properties: It has a clearly defined starting point, where all requirements on the end-product are fixed and associated performance metrics of the customer are well defined. It has a clearly defined ending point, when the product or service is delivered to the customer and accepted by him, according to the performance metrics defined at the start point. The implementation of the process might be restricted by external boundary conditions and constraints mutually agreed with the customer. As far as those are respected the IO has the free choice to select methods and means of implementation. The ISS Increment Operations Service (IOS) activities required for the MSP Exploitation program cover the complete increment specific cycle starting with the support to strategic planning and ending with the post increment evaluation. These activities are divided into sub-services including the following tasks: - ISS Planning Support covering the support to strategic and tactical planning up to the generation - Development &Payload Integration Support - ISS Increment Preparation - ISS Increment Execution These processes are tight together by the Increment Integration Management, which provides the planning and scheduling of all activities as well as the technical management of the overall process . The paper describes the entire End-to-End ISS Increment Operations service and the implementation to support the Columbus Flight 1E related increment and subsequent ISS increments. Special attention is paid to the implications caused by long term operations on hardware, software and operations personnel.

White organic light-emitting diodes with fluorescent tube efficiency.

PubMed

Reineke, Sebastian; Lindner, Frank; Schwartz, Gregor; Seidler, Nico; Walzer, Karsten; Lüssem, Björn; Leo, Karl

2009-05-14

The development of white organic light-emitting diodes (OLEDs) holds great promise for the production of highly efficient large-area light sources. High internal quantum efficiencies for the conversion of electrical energy to light have been realized. Nevertheless, the overall device power efficiencies are still considerably below the 60-70 lumens per watt of fluorescent tubes, which is the current benchmark for novel light sources. Although some reports about highly power-efficient white OLEDs exist, details about structure and the measurement conditions of these structures have not been fully disclosed: the highest power efficiency reported in the scientific literature is 44 lm W(-1) (ref. 7). Here we report an improved OLED structure which reaches fluorescent tube efficiency. By combining a carefully chosen emitter layer with high-refractive-index substrates, and using a periodic outcoupling structure, we achieve a device power efficiency of 90 lm W(-1) at 1,000 candelas per square metre. This efficiency has the potential to be raised to 124 lm W(-1) if the light outcoupling can be further improved. Besides approaching internal quantum efficiency values of one, we have also focused on reducing energetic and ohmic losses that occur during electron-photon conversion. We anticipate that our results will be a starting point for further research, leading to white OLEDs having efficiencies beyond 100 lm W(-1). This could make white-light OLEDs, with their soft area light and high colour-rendering qualities, the light sources of choice for the future.

34 CFR 200.16 - Starting points.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Using data from the 2001-2002 school year, each State must establish starting points in reading/language... of proficient students in the school that represents 20 percent of the State's total enrollment among all schools ranked by the percentage of students at the proficient level. The State must determine...

Starting geometry creation and design method for freeform optics.

PubMed

Bauer, Aaron; Schiesser, Eric M; Rolland, Jannick P

2018-05-01

We describe a method for designing freeform optics based on the aberration theory of freeform surfaces that guides the development of a taxonomy of starting-point geometries with an emphasis on manufacturability. An unconventional approach to the optimization of these starting designs wherein the rotationally invariant 3rd-order aberrations are left uncorrected prior to unobscuring the system is shown to be effective. The optimal starting-point geometry is created for an F/3, 200 mm aperture-class three-mirror imager and is fully optimized using a novel step-by-step method over a 4 × 4 degree field-of-view to exemplify the design method. We then optimize an alternative starting-point geometry that is common in the literature but was quantified here as a sub-optimal candidate for optimization with freeform surfaces. A comparison of the optimized geometries shows the performance of the optimal geometry is at least 16× better, which underscores the importance of the geometry when designing freeform optics.

SigVox - A 3D feature matching algorithm for automatic street object recognition in mobile laser scanning point clouds

NASA Astrophysics Data System (ADS)

Wang, Jinhu; Lindenbergh, Roderik; Menenti, Massimo

2017-06-01

Urban road environments contain a variety of objects including different types of lamp poles and traffic signs. Its monitoring is traditionally conducted by visual inspection, which is time consuming and expensive. Mobile laser scanning (MLS) systems sample the road environment efficiently by acquiring large and accurate point clouds. This work proposes a methodology for urban road object recognition from MLS point clouds. The proposed method uses, for the first time, shape descriptors of complete objects to match repetitive objects in large point clouds. To do so, a novel 3D multi-scale shape descriptor is introduced, that is embedded in a workflow that efficiently and automatically identifies different types of lamp poles and traffic signs. The workflow starts by tiling the raw point clouds along the scanning trajectory and by identifying non-ground points. After voxelization of the non-ground points, connected voxels are clustered to form candidate objects. For automatic recognition of lamp poles and street signs, a 3D significant eigenvector based shape descriptor using voxels (SigVox) is introduced. The 3D SigVox descriptor is constructed by first subdividing the points with an octree into several levels. Next, significant eigenvectors of the points in each voxel are determined by principal component analysis (PCA) and mapped onto the appropriate triangle of a sphere approximating icosahedron. This step is repeated for different scales. By determining the similarity of 3D SigVox descriptors between candidate point clusters and training objects, street furniture is automatically identified. The feasibility and quality of the proposed method is verified on two point clouds obtained in opposite direction of a stretch of road of 4 km. 6 types of lamp pole and 4 types of road sign were selected as objects of interest. Ground truth validation showed that the overall accuracy of the ∼170 automatically recognized objects is approximately 95%. The results demonstrate that the proposed method is able to recognize street furniture in a practical scenario. Remaining difficult cases are touching objects, like a lamp pole close to a tree.

Early endocrine attending surgeon presence increases operating room efficiency.

PubMed

Clark, Audra; Dackiw, Alan P; White, Wendy D; Nwariaku, Fiemu E; Holt, Shelby A; Rabaglia, Jennifer L; Oltmann, Sarah C

2016-10-01

Preincision operating room (OR) preparation varies greatly. Cases requiring exacting preoperative setup may be more sensitive to inconsistent team members and trainees. Leadership and oversight by the surgeon may facilitate a timely start. The study hypothesized that early attending presence in the OR expedites surgery start time, improving efficiency, and decreasing cost. Prospective data collection of endocrine surgery cases at an urban teaching hospital was performed. Time points recorded in minutes. Cost/min of OR time was $54. Patients classified as in the OR ≤10 min before attending arrival or >10 min before attending arrival. A total of 227 cases (166 thyroid, 54 parathyroid, 10 adrenal) were performed over 14 mo. Of the patients, 128 were in the OR ≤10 min before attending arrival, and 99 patients were >10 min (3 ± 3 min versus 35 ± 14 min, P < 0.01). The ≤10 min procedures started sooner after patient arrival in OR (40 ± 11 versus 63 ± 19, P < 0.01) which equated to $1202 of savings before incision. Although attending time in the OR before incision was equivalent between groups for adrenal and parathyroid, time to incision was shorter in the ≤10 min groups, saving $2416 ± 477 and $1458 ± 244, respectively (P < 0.01). Attending time in OR before thyroidectomy was 13 min longer in ≤10 min than >10 min (P < 0.01), but incisions were made 20 min sooner (P < 0.01) equating to $1076 ± 120 in savings. Early attending presence in the OR shortens time to incision. For parathyroid and adrenal cases, this does not require additional surgeon time. In ORs without consistent teams, early attending presence in the OR improves efficiency and yields significant cost savings. Copyright © 2016 Elsevier Inc. All rights reserved.

ENKI - A tool for analysing the learning efficiency

NASA Astrophysics Data System (ADS)

Simona, Dudáková; Boris, Lacsný; Aba, Teleki

2017-01-01

Long-term memory plays a crucial role in learning mechanisms. We start to build up a probability model of learning (ENKI) ten years ago based on findings of micro genetics published in [1]. We accomplished a number of experiments in our department to testify the validity of the model with success. We described ENKI in detail here, giving the general mathematical formula of the learning curve. This paper pointed out that the model ENKI can detect its own strategy of learning in the brain as well as the simulation of the process of learning that will lead to the development of this method using its own strategy.

Iron Porphyrins Embedded into a Supramolecular Porous Organic Cage for Electrochemical CO2 Reduction in Water.

PubMed

Smith, Peter T; Benke, Bahiru Punja; Cao, Zhi; Kim, Younghoon; Nichols, Eva M; Kim, Kimoon; Chang, Christopher J

2018-06-19

We report the use of a porous organic cage composed of six iron tetraphenylporphyrins as a supramolecular catalyst for electrochemical CO2-to-CO conversion. This strategy enhances active site exposure and substrate diffusion relative to the monomeric catalyst, resulting in CO generation with near-quantitative Faradaic efficiency in pH 7.3 water, with activities reaching 55,250 turnovers. These results provide a starting point for the design of supramolecular catalysts that can exploit the properties of the surrounding matrix yet retain the tunability of the original molecular unit. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Efficient exploration of chemical space by fragment-based screening.

PubMed

Hall, Richard J; Mortenson, Paul N; Murray, Christopher W

2014-01-01

Screening methods seek to sample a vast chemical space in order to identify starting points for further chemical optimisation. Fragment based drug discovery exploits the superior sampling of chemical space that can be achieved when the molecular weight is restricted. Here we show that commercially available fragment space is still relatively poorly sampled and argue for highly sensitive screening methods to allow the detection of smaller fragments. We analyse the properties of our fragment library versus the properties of X-ray hits derived from the library. We particularly consider properties related to the degree of planarity of the fragments. Copyright © 2014 Elsevier Ltd. All rights reserved.

Devolution and health in the UK: policy and its lessons since 1998

PubMed Central

Greer, Scott L.

2016-01-01

Introduction Since devolution in 1998, the UK has had four increasingly distinct health systems, in England, Northern Ireland, Scotland and Wales. Sources of data Secondary literature and authors’ own research since 1998. Areas of agreement From a similar starting point, there has been a considerable distancing of the four health systems from each other in policies, priorities and organization. Areas of controversy The comparative efficiency and quality of the different systems as well as the wisdom of their greater or lesser reliance on integration and competition. Growing points Better and more comparable public data would be useful, as would consideration of potential devolved lessons for UK policy. Areas timely for developing further research Comparisons of organization and performance at levels more detailed than whole systems; analysis of the resilience and management of different systems in a context of budgetary austerity; analysis of the politics behind policy decisions. PMID:27151953

Structural optimisation of cage induction motors using finite element analysis

NASA Astrophysics Data System (ADS)

Palko, S.

The current trend in motor design is to have highly efficient, low noise, low cost, and modular motors with a high power factor. High torque motors are useful in applications like servo motors, lifts, cranes, and rolling mills. This report contains a detailed review of different optimization methods applicable in various design problems. Special attention is given to the performance of different methods, when they are used with finite element analysis (FEA) as an objective function, and accuracy problems arising from the numerical simulations. Also an effective method for designing high starting torque and high efficiency motors is presented. The method described in this work utilizes FEA combined with algorithms for the optimization of the slot geometry. The optimization algorithm modifies the position of the nodal points in the element mesh. The number of independent variables ranges from 14 to 140 in this work.

Oligovalent Fab display on M13 phage improved by directed evolution.

PubMed

Huovinen, Tuomas; Sanmark, Hanna; Ylä-Pelto, Jani; Vehniäinen, Markus; Lamminmäki, Urpo

2010-03-01

Efficient display of antibody on filamentous phage M13 coat is crucial for successful biopanning selections. We applied a directed evolution strategy to improve the oligovalent display of a poorly behaving Fab fragment fused to phage gene-3 for minor coat protein (g3p). The Fab displaying clones were enriched from a randomly mutated Fab gene library with polyclonal anti-mouse IgG antibodies. Contribution of each mutation to the improved phenotype of one selected mutant was studied. It was found out that two point mutations had significant contribution to the display efficiency of Fab clones superinfected with hyperphage. The most dramatic effect was connected to a start codon mutation, from AUG to GUG, of the PelB signal sequence preceding the heavy chain. The clone carrying this mutation, FabM(GUG), displayed Fab 19-fold better and yielded twofold higher phage titers than the original Fab.

Behavioural signatures of backward planning in animals.

PubMed

Afsardeir, Arsham; Keramati, Mehdi

2018-03-01

Goal-directed planning in behavioural and neural sciences is theorized to involve a prospective mental simulation that, starting from the animal's current state in the environment, expands a decision tree in a forward fashion. Backward planning in the artificial intelligence literature, however, suggests that agents expand a mental tree in a backward fashion starting from a certain goal state they have in mind. Here, we show that several behavioural patterns observed in animals and humans, namely outcome-specific Pavlovian-to-instrumental transfer and differential outcome effect, can be parsimoniously explained by backward planning. Our basic assumption is that the presentation of a cue that has been associated with a certain outcome triggers backward planning from that outcome state. On the basis of evidence pointing to forward and backward planning models, we discuss the possibility of brain using a bidirectional planning mechanism where forward and backward trees are expanded in parallel to achieve higher efficiency. © 2018 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Technical and Economic Assessment of the Implementation of Measures for Reducing Energy Losses in Distribution Systems

NASA Astrophysics Data System (ADS)

Aguila, Alexander; Wilson, Jorge

2017-07-01

This paper develops a methodology to assess a group of measures of electrical improvements in distribution systems, starting from the complementation of technical and economic criteria. In order to solve the problem of energy losses in distribution systems, technical and economic analysis was performed based on a mathematical model to establish a direct relationship between the energy saved by way of minimized losses and the costs of implementing the proposed measures. This paper aims at analysing the feasibility of reducing energy losses in distribution systems, by changing existing network conductors by larger crosssection conductors and distribution voltage change at higher levels. The impact of this methodology provides a highly efficient mathematical tool for analysing the feasibility of implementing improvement projects based on their costs which is a very useful tool for the distribution companies that will serve as a starting point to the analysis for this type of projects in distribution systems.

Inverse identification of unknown finite-duration air pollutant release from a point source in urban environment

NASA Astrophysics Data System (ADS)

Kovalets, Ivan V.; Efthimiou, George C.; Andronopoulos, Spyros; Venetsanos, Alexander G.; Argyropoulos, Christos D.; Kakosimos, Konstantinos E.

2018-05-01

In this work, we present an inverse computational method for the identification of the location, start time, duration and quantity of emitted substance of an unknown air pollution source of finite time duration in an urban environment. We considered a problem of transient pollutant dispersion under stationary meteorological fields, which is a reasonable assumption for the assimilation of available concentration measurements within 1 h from the start of an incident. We optimized the calculation of the source-receptor function by developing a method which requires integrating as many backward adjoint equations as the available measurement stations. This resulted in high numerical efficiency of the method. The source parameters are computed by maximizing the correlation function of the simulated and observed concentrations. The method has been integrated into the CFD code ADREA-HF and it has been tested successfully by performing a series of source inversion runs using the data of 200 individual realizations of puff releases, previously generated in a wind tunnel experiment.

Influence of Femoral Component Design on Retrograde Femoral Nail Starting Point.

PubMed

Service, Benjamin C; Kang, William; Turnbull, Nathan; Langford, Joshua; Haidukewych, George; Koval, Kenneth J

2015-10-01

Our experience with retrograde femoral nailing after periprosthetic distal femur fractures was that femoral components with deep trochlear grooves posteriorly displace the nail entry point resulting in recurvatum deformity. This study evaluated the influence of distal femoral prosthetic design on the starting point. One hundred lateral knee images were examined. The distal edge of Blumensaat's line was used to create a ratio of its location compared with the maximum anteroposterior condylar width called the starting point ratio (SPR). Femoral trials from 6 manufacturers were analyzed to determine the location of simulated nail position in the sagittal plane compared with the maximum anteroposterior prosthetic width. These measurements were used to create a ratio, the femoral component ratio (FCR). The FCR was compared with the SPR to determine if a femoral component would be at risk for retrograde nail starting point posterior to the Blumensaat's line. The mean SPR was 0.392 ± 0.03, and the mean FCR was 0.416 ± 0.05, which was significantly greater (P = 0.003). The mean FCR was 0.444 ± 0.06 for the cruciate retaining (CR) trials and was 0.393 ± 0.04 for the posterior stabilized trials; this difference was significant (P < 0.001). The FCR for the femoral trials studied was significantly greater than the SPR for native knees and was significantly greater for CR femoral components compared with posterior stabilized components. These findings demonstrate that many total knee prostheses, particularly CR designs, are at risk for a starting point posterior to Blumensaat's line.

C-5M Super Galaxy Utilization with Joint Precision Airdrop System

DTIC Science & Technology

2012-03-22

System Notes FireFly 900-2,200 Steerable Parafoil Screamer 500-2,200 Steerable Parafoil w/additional chutes to slow touchdown Dragonfly...setting . This initial feasible solution provides the Nonlinear Program algorithm a starting point to continue its calculations. The model continues...provides the NLP with a starting point of 1. This provides the NLP algorithm a point within the feasible region to begin its calculations in an attempt

COREnet: The Fusion of Social Network Analysis and Target Audience Analysis

DTIC Science & Technology

2014-12-01

misunderstanding of MISO (PSYOP) not only in doctrine, but also in practice, is easily understood. MISO has a long history of name changes starting ...TAA does not strictly adhere to any particular theory; studying dynamics is a valid starting point for analysis, and is naturally congruent with the...provides a starting point for further analysis. The PO is a pre-approved objective by the Office of the Secretary of Defense (OSD) (JP 3–53, 2003, V-1

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2014-01-01 2014-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2012-01-01 2012-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2013-01-01 2013-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

An Alternative Starting Point for Fraction Instruction

ERIC Educational Resources Information Center

Cortina, José Luis; Višnovská, Jana; Zúñiga, Claudia

2015-01-01

We analyze the results of a study conducted for the purpose of assessing the viability of an alternative starting point for teaching fractions. The alternative is based on Freudenthal's insights about fraction as comparison. It involves portraying the entities that unit fractions quantify as always being apart from the reference unit, instead of…

33 CFR 165.915 - Security zones; Captain of the Port Detroit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the starting point at 41°58.4′ N, 083°15.4′ W (NAD 83). (2) Davis Besse Nuclear Power Station. All... to the starting point 41°36.1′ N, 083°04.7′ W (NAD 83). (b) Regulations. (1) In accordance with § 165...

Length, Area, and Volume--or, Just Geometry Really

ERIC Educational Resources Information Center

Ball, Derek

2012-01-01

Many delegates at "conference" relish the opportunity, and the space, to "do some mathematics". Opportunity and space help to make the experience memorable, but how often is the quality of the starting point, or question acknowledged? Here is a set of starting points or problems that invite the reader to "do some mathematics". Deliberately, no…

Intelligence and working memory systems: evidence of neural efficiency in alpha band ERD.

PubMed

Grabner, R H; Fink, A; Stipacek, A; Neuper, C; Neubauer, A C

2004-07-01

Starting from the well-established finding that brighter individuals display a more efficient brain function when performing cognitive tasks (i.e., neural efficiency), we investigated the relationship between intelligence and cortical activation in the context of working memory (WM) tasks. Fifty-five male (n=28) and female (n=27) participants worked on (1) a classical forward digit span task demanding only short-term memory (STM), (2) an attention-switching task drawing on the central executive (CE) of WM and (3) a WM task involving both STM storage and CE processes. During performance of these three types of tasks, cortical activation was quantified by the extent of Event-Related Desynchronization (ERD) in the alpha band of the human EEG. Correlational analyses revealed associations between the amount of ERD in the upper alpha band and intelligence in several brain regions. In all tasks, the males were more likely to display the negative intelligence-cortical activation relationship. Furthermore, stronger associations between ERD and intelligence were found for fluid rather than crystallized intelligence. Analyses also point to topographical differences in neural efficiency depending on sex, task type and the associated cognitive subsystems engaged during task performance.

Evaluation of annual efficiencies of high temperature central receiver concentrated solar power plants with thermal energy storage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehrhart, Brian David; Gill, David Dennis

The current study has examined four cases of a central receiver concentrated solar power plant with thermal energy storage using the DELSOL and SOLERGY computer codes. The current state-of-the-art base case was compared with a theoretical high temperature case which was based on the scaling of some input parameters and the estimation of other parameters based on performance targets from the Department of Energy SunShot Initiative. This comparison was done for both current and high temperature cases in two configurations: a surround field with an external cylindrical receiver and a north field with a single cavity receiver. There is amore » fairly dramatic difference between the design point and annual average performance, especially in the solar field and receiver subsystems, and also in energy losses due to the thermal energy storage being full to capacity. Additionally, there are relatively small differences (<2%) in annual average efficiencies between the Base and High Temperature cases, despite an increase in thermal to electric conversion efficiency of over 8%. This is due the increased thermal losses at higher temperature and operational losses due to subsystem start-up and shut-down. Thermal energy storage can mitigate some of these losses by utilizing larger thermal energy storage to ensure that the electric power production system does not need to stop and re-start as often, but solar energy is inherently transient. Economic and cost considerations were not considered here, but will have a significant impact on solar thermal electric power production strategy and sizing.« less

The influence of plan modulation on the interplay effect in VMAT liver SBRT treatments.

PubMed

Hubley, Emily; Pierce, Greg

2017-08-01

Volumetric modulated arc therapy (VMAT) uses multileaf collimator (MLC) leaves, gantry speed, and dose rate to modulate beam fluence, producing the highly conformal doses required for liver radiotherapy. When targets that move with respiration are treated with a dynamic fluence, there exists the possibility for interplay between the target and leaf motions. This study employs a novel motion simulation technique to determine if VMAT liver SBRT plans with an increase in MLC leaf modulation are more susceptible to dosimetric differences in the GTV due to interplay effects. For ten liver SBRT patients, two VMAT plans with different amounts of MLC leaf modulation were created. Motion was simulated using a random starting point in the respiratory cycle for each fraction. To isolate the interplay effect, motion was also simulated using four specific starting points in the respiratory cycle. The dosimetric differences caused by different starting points were examined by subtracting resultant dose distributions from each other. When motion was simulated using random starting points for each fraction, or with specific starting points, there were significantly more dose differences in the GTV (maximum 100cGy) for more highly modulated plans, but the overall plan quality was not adversely affected. Plans with more MLC leaf modulation are more susceptible to interplay effects, but dose differences in the GTV are clinically negligible in magnitude. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

33 CFR 165.911 - Security Zones; Captain of the Port Buffalo Zone.

Code of Federal Regulations, 2010 CFR

2010-07-01

...′ N, 076°23.2′ W; and then following the shoreline back to the point of origin (NAD 83). (2) Ginna... 43°16.7′ N, 077°18.3′ W; then following the shoreline back to starting point (NAD 83). (3) Moses... northwest to 45°00.36′ N, 074°48.16′ W; then northeast back to the starting point (NAD 83). (4) Long Sault...

Instruments and Methodologies for the Underwater Tridimensional Digitization and Data Musealization

NASA Astrophysics Data System (ADS)

Repola, L.; Memmolo, R.; Signoretti, D.

2015-04-01

In the research started within the SINAPSIS project of the Università degli Studi Suor Orsola Benincasa an underwater stereoscopic scanning aimed at surveying of submerged archaeological sites, integrable to standard systems for geomorphological detection of the coast, has been developed. The project involves the construction of hardware consisting of an aluminum frame supporting a pair of GoPro Hero Black Edition cameras and software for the production of point clouds and the initial processing of data. The software has features for stereoscopic vision system calibration, reduction of noise and the of distortion of underwater captured images, searching for corresponding points of stereoscopic images using stereo-matching algorithms (dense and sparse), for points cloud generating and filtering. Only after various calibration and survey tests carried out during the excavations envisaged in the project, the mastery of methods for an efficient acquisition of data has been achieved. The current development of the system has allowed generation of portions of digital models of real submerged scenes. A semi-automatic procedure for global registration of partial models is under development as a useful aid for the study and musealization of sites.

Advanced IGCC/Hydrogen Gas Turbine Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

York, William; Hughes, Michael; Berry, Jonathan

2015-07-30

The objective of this program was to develop the technologies required for a fuel flexible (coal derived hydrogen or syngas) gas turbine for IGCC that met DOE turbine performance goals. The overall DOE Advanced Power System goal was to conduct the research and development (R&D) necessary to produce coal-based IGCC power systems with high efficiency, near-zero emissions, and competitive capital cost. To meet this goal, the DOE Fossil Energy Turbine Program had as an interim objective of 2 to 3 percentage points improvement in combined cycle (CC) efficiency. The final goal is 3 to 5 percentage points improvement in CCmore » efficiency above the state of the art for CC turbines in IGCC applications at the time the program started. The efficiency goals were for NOx emissions of less than 2 ppm NOx (@15 % O2). As a result of the technologies developed under this program, the DOE goals were exceeded with a projected 8 point efficiency improvement. In addition, a new combustion technology was conceived of and developed to overcome the challenges of burning hydrogen and achieving the DOE’s NOx goal. This report also covers the developments under the ARRA-funded portion of the program that include gas turbine technology advancements for improvement in the efficiency, emissions, and cost performance of gas turbines for industrial applications with carbon capture and sequestration. Example applications could be cement plants, chemical plants, refineries, steel and aluminum plants, manufacturing facilities, etc. The DOE’s goal for more than 5 percentage point improvement in efficiency was met with cycle analyses performed for representative IGCC Steel Mill and IGCC Refinery applications. Technologies were developed in this program under the following areas: combustion, larger latter stage buckets, CMC and EBC, advanced materials and coatings, advanced configurations to reduce cooling, sealing and rotor purge flows, turbine aerodynamics, advanced sensors, advancements in first stage hot gas path components, and systems analyses to determine benefits of all previously mentioned technologies to a gas turbine system in an IGCC configuration. This project built on existing gas turbine technology and product developments, and developed and validated the necessary turbine related technologies and sub-systems needed to meet the DOE turbine program goals. The scope of the program did not cover the design and validation of a full-scale prototype machine with the technology advances from this program incorporated. In summary, the DOE goals were met with this program. While the commercial landscape has not resulted in a demand for IGCC gas turbines many of the technologies that were developed over the course of the program are benefiting the US by being applied to new higher efficiency natural gas fueled gas turbines.« less

Efficiency gain of solid oxide fuel cell systems by using anode offgas recycle - Results for a small scale propane driven unit

NASA Astrophysics Data System (ADS)

Dietrich, Ralph-Uwe; Oelze, Jana; Lindermeir, Andreas; Spitta, Christian; Steffen, Michael; Küster, Torben; Chen, Shaofei; Schlitzberger, Christian; Leithner, Reinhard

The transfer of high electrical efficiencies of solid oxide fuel cells (SOFC) into praxis requires appropriate system concepts. One option is the anode-offgas recycling (AOGR) approach, which is based on the integration of waste heat using the principle of a chemical heat pump. The AOGR concept allows a combined steam- and dry-reforming of hydrocarbon fuel using the fuel cell products steam and carbon dioxide. SOFC fuel gas of higher quantity and quality results. In combination with internal reuse of waste heat the system efficiency increases compared to the usual path of partial oxidation (POX). The demonstration of the AOGR concept with a 300 Wel-SOFC stack running on propane required: a combined reformer/burner-reactor operating in POX (start-up) and AOGR modus; a hotgas-injector for anode-offgas recycling to the reformer; a dynamic process model; a multi-variable process controller; full system operation for experimental proof of the efficiency gain. Experimental results proof an efficiency gain of 18 percentage points (η·POX = 23%, η·AOGR = 41%) under idealized lab conditions. Nevertheless, further improvements of injector performance, stack fuel utilization and additional reduction of reformer reformer O/C ratio and system pressure drop are required to bring this approach into self-sustaining operation.

The Personal Responsibility and Work Opportunity Act of 1996: What Welfare Reform Means for Head Start.

ERIC Educational Resources Information Center

Shuell, Julie; Hanna, Jeff; Oterlei, Jannell; Kariger, Patricia

This National Head Start Association booklet outlines the main provisions of the Personal Responsibility and Work Opportunity Act and describes how it may affect local Head Start Programs. The document is intended to serve as a starting point for local programs, parents, administrators and policy workers to discuss and plan how Head Start will…

Oxygen tolerance of an in silico-designed bioinspired hydrogen-evolving catalyst in water.

PubMed

Sit, Patrick H-L; Car, Roberto; Cohen, Morrel H; Selloni, Annabella

2013-02-05

Certain bacterial enzymes, the diiron hydrogenases, have turnover numbers for hydrogen production from water as large as 10(4)/s. Their much smaller common active site, composed of earth-abundant materials, has a structure that is an attractive starting point for the design of a practical catalyst for electrocatalytic or solar photocatalytic hydrogen production from water. In earlier work, our group has reported the computational design of [FeFe](P)/FeS(2), a hydrogenase-inspired catalyst/electrode complex, which is efficient and stable throughout the production cycle. However, the diiron hydrogenases are highly sensitive to ambient oxygen by a mechanism not yet understood in detail. An issue critical for practical use of [FeFe](P)/FeS(2) is whether this catalyst/electrode complex is tolerant to the ambient oxygen. We report demonstration by ab initio simulations that the complex is indeed tolerant to dissolved oxygen over timescales long enough for practical application, reducing it efficiently. This promising hydrogen-producing catalyst, composed of earth-abundant materials and with a diffusion-limited rate in acidified water, is efficient as well as oxygen tolerant.

Oxygen tolerance of an in silico-designed bioinspired hydrogen-evolving catalyst in water

PubMed Central

Sit, Patrick H.-L.; Car, Roberto; Cohen, Morrel H.; Selloni, Annabella

2013-01-01

Certain bacterial enzymes, the diiron hydrogenases, have turnover numbers for hydrogen production from water as large as 104/s. Their much smaller common active site, composed of earth-abundant materials, has a structure that is an attractive starting point for the design of a practical catalyst for electrocatalytic or solar photocatalytic hydrogen production from water. In earlier work, our group has reported the computational design of [FeFe]P/FeS2, a hydrogenase-inspired catalyst/electrode complex, which is efficient and stable throughout the production cycle. However, the diiron hydrogenases are highly sensitive to ambient oxygen by a mechanism not yet understood in detail. An issue critical for practical use of [FeFe]P/FeS2 is whether this catalyst/electrode complex is tolerant to the ambient oxygen. We report demonstration by ab initio simulations that the complex is indeed tolerant to dissolved oxygen over timescales long enough for practical application, reducing it efficiently. This promising hydrogen-producing catalyst, composed of earth-abundant materials and with a diffusion-limited rate in acidified water, is efficient as well as oxygen tolerant. PMID:23341607

Damage Propagation Modeling for Aircraft Engine Prognostics

NASA Technical Reports Server (NTRS)

Saxena, Abhinav; Goebel, Kai; Simon, Don; Eklund, Neil

2008-01-01

This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the Prognostics and Health Management (PHM) data competition at PHM 08.

Timing of intermittent torque control with wire-driven gait training robot lifting toe trajectory for trip avoidance.

PubMed

Miyake, Tamon; Kobayashi, Yo; Fujie, Masakatsu G; Sugano, Shigeki

2017-07-01

Gait training robots are useful for changing gait patterns and decreasing risk of trip. Previous research has reported that decreasing duration of the assistance or guidance of the robot is beneficial for efficient gait training. Although robotic intermittent control method for assisting joint motion has been established, the effect of the robot intervention timing on change of toe clearance is unclear. In this paper, we tested different timings of applying torque to the knee, employing the intermittent control of a gait training robot to increase toe clearance throughout the swing phase. We focused on knee flexion motion and designed a gait training robot that can apply flexion torque to the knee with a wire-driven system. We used a method of timing detecting for the robot conducting torque control based on information from the hip, knee, and ankle angles to establish a non-time dependent parameter that can be used to adapt to gait change, such as gait speed. We carried out an experiment in which the conditions were four time points: starting the swing phase, lifting the foot, maintaining knee flexion, and finishing knee flexion. The results show that applying flexion torque to the knee at the time point when people start lifting their toe is effective for increasing toe clearance in the whole swing phase.

Multilevel relaxation phenomena and population trapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hioe, F.T.

1991-11-01

This final report summarizes the main results of our work supported by DOE since 1982. A list of 45 publications supported by this DOE Grant is attached at the end of this report. The use and exploitation of the SU(N) dynamic symmetry to the study of the dynamics of laser-atom interaction was the starting point of our research work under this DOE Grant, and is our most original contribution to the field of quantum electrodynamics. Many results of general and special interests have been derived and developed from this starting point and the following is a summary of them: (1)more » We have introduced a set of simple relations based on the principle of unitary invariance which has proved to be useful for the study of the dynamics of a quantum system involving coupling. (2) We have found various specific conditions under which (a) we may have trapped population, or (b) we may send laser pulses through a multilevel atomic medium without attenuation. (3) We have found a remarkably efficient method for optimal state selective multiphoton population transfer, that employs two or more spatially overlapping lasers arranged in an unconventional sequence which we called counterintuitive''. A recent suggestion by Profs. P. Marte, P. Zoller and J.L. Hall to use this counterintuitive method for atomic beam deflections promises to make this remarkably effective procedure to become an important method in atomic interferometry.« less

System Sensitivity Analysis Applied to the Conceptual Design of a Dual-Fuel Rocket SSTO

NASA Technical Reports Server (NTRS)

Olds, John R.

1994-01-01

This paper reports the results of initial efforts to apply the System Sensitivity Analysis (SSA) optimization method to the conceptual design of a single-stage-to-orbit (SSTO) launch vehicle. SSA is an efficient, calculus-based MDO technique for generating sensitivity derivatives in a highly multidisciplinary design environment. The method has been successfully applied to conceptual aircraft design and has been proven to have advantages over traditional direct optimization methods. The method is applied to the optimization of an advanced, piloted SSTO design similar to vehicles currently being analyzed by NASA as possible replacements for the Space Shuttle. Powered by a derivative of the Russian RD-701 rocket engine, the vehicle employs a combination of hydrocarbon, hydrogen, and oxygen propellants. Three primary disciplines are included in the design - propulsion, performance, and weights & sizing. A complete, converged vehicle analysis depends on the use of three standalone conceptual analysis computer codes. Efforts to minimize vehicle dry (empty) weight are reported in this paper. The problem consists of six system-level design variables and one system-level constraint. Using SSA in a 'manual' fashion to generate gradient information, six system-level iterations were performed from each of two different starting points. The results showed a good pattern of convergence for both starting points. A discussion of the advantages and disadvantages of the method, possible areas of improvement, and future work is included.

An Examination of the Starting Point Approach to Design and Technology

ERIC Educational Resources Information Center

Good, Keith; Jarvinen, Esa-Matti

2007-01-01

This study examines the Starting Point Approach (SPA) to design and technology, which is intended to maximize creativity while being manageable for the teacher. The purpose of the study was to examine whether the children could do what the approach requires and in particular whether it promoted their innovative thinking. Data were collected during…

The Use of Mixed Methods in Randomized Control Trials

ERIC Educational Resources Information Center

White, Howard

2013-01-01

Evaluations should be issues driven, not methods driven. The starting point should be priority programs to be evaluated or policies to be tested. From this starting point, a list of evaluation questions is identified. For each evaluation question, the task is to identify the best available method for answering that question. Hence it is likely…

In the Heart of Teaching: A Two-Dimensional Conception of Teachers' Relational Competence

ERIC Educational Resources Information Center

Aspelin, Jonas

2017-01-01

Research reveals that teachers' relational competence is crucial for successful education. However, the field is still small and largely unexplored, and arguably needs a better and more precise theoretical starting point. This article seeks to help establish such a starting point, aiming to outline a relational framework based on the philosophies…

Computers Don't Byte. A Starting Point for Teachers Using Computers. A Resource Booklet.

ERIC Educational Resources Information Center

Lieberman, Michael; And Others

Designed to provide a starting point for the teacher without computer experience, this booklet deals with both the "how" and the "when" of computers in education. Educational applications described include classroom uses with the student as a passive or an active user and programs for the handicapped; the purpose of computers…

Bioelectrochemical enhancement of anaerobic methanogenesis for high organic load rate wastewater treatment in a up-flow anaerobic sludge blanket (UASB) reactor.

PubMed

Zhao, Zhiqiang; Zhang, Yaobin; Chen, Shuo; Quan, Xie; Yu, Qilin

2014-10-17

A coupling process of anaerobic methanogenesis and electromethanogenesis was proposed to treat high organic load rate (OLR) wastewater. During the start-up stage, acetate removal efficiency of the electric-biological reactor (R1) reached the maximization about 19 percentage points higher than that of the control anaerobic reactor without electrodes (R2), and CH4 production rate of R1 also increased about 24.9% at the same time, while additional electric input was 1/1.17 of the extra obtained energy from methane. Coulombic efficiency and current recorded showed that anodic oxidation contributed a dominant part in degrading acetate when the metabolism of methanogens was low during the start-up stage. Along with prolonging operating time, aceticlastic methanogenesis gradually replaced anodic oxidation to become the main pathway of degrading acetate. When the methanogens were inhibited under the acidic conditions, anodic oxidation began to become the main pathway of acetate decomposition again, which ensured the reactor to maintain a stable performance. FISH analysis confirmed that the electric field imposed could enrich the H2/H(+)-utilizing methanogens around the cathode to help for reducing the acidity. This study demonstrated that an anaerobic digester with a pair of electrodes inserted to form a coupling system could enhance methanogenesis and reduce adverse impacts.

Discrete Event Simulation Model of the Polaris 2.1 Gamma Ray Imaging Radiation Detection Device

DTIC Science & Technology

2016-06-01

out China, Pakistan, and India as having a minimalist point of view with regards to nuclear weapons. For those in favor of this approach, he does...Referee event graph The referee listens to the start and stops of the mover and determines whether or not the Polaris has entered or exited the...are highlighted in Figure 17: • Polaris start point • Polaris end point • Polaris original waypoints • Polaris ad hoc waypoints • Number of

Distributing and storing data efficiently by means of special datasets in the ATLAS collaboration

NASA Astrophysics Data System (ADS)

Köneke, Karsten; ATLAS Collaboration

2011-12-01

With the start of the LHC physics program, the ATLAS experiment started to record vast amounts of data. This data has to be distributed and stored on the world-wide computing grid in a smart way in order to enable an effective and efficient analysis by physicists. This article describes how the ATLAS collaboration chose to create specialized reduced datasets in order to efficiently use computing resources and facilitate physics analyses.

Dynamic Creation of Social Networks for Syndromic Surveillance Using Information Fusion

NASA Astrophysics Data System (ADS)

Holsopple, Jared; Yang, Shanchieh; Sudit, Moises; Stotz, Adam

To enhance the effectiveness of health care, many medical institutions have started transitioning to electronic health and medical records and sharing these records between institutions. The large amount of complex and diverse data makes it difficult to identify and track relationships and trends, such as disease outbreaks, from the data points. INFERD: Information Fusion Engine for Real-Time Decision-Making is an information fusion tool that dynamically correlates and tracks event progressions. This paper presents a methodology that utilizes the efficient and flexible structure of INFERD to create social networks representing progressions of disease outbreaks. Individual symptoms are treated as features allowing multiple hypothesis being tracked and analyzed for effective and comprehensive syndromic surveillance.

Fragment-based drug discovery and its application to challenging drug targets.

PubMed

Price, Amanda J; Howard, Steven; Cons, Benjamin D

2017-11-08

Fragment-based drug discovery (FBDD) is a technique for identifying low molecular weight chemical starting points for drug discovery. Since its inception 20 years ago, FBDD has grown in popularity to the point where it is now an established technique in industry and academia. The approach involves the biophysical screening of proteins against collections of low molecular weight compounds (fragments). Although fragments bind to proteins with relatively low affinity, they form efficient, high quality binding interactions with the protein architecture as they have to overcome a significant entropy barrier to bind. Of the biophysical methods available for fragment screening, X-ray protein crystallography is one of the most sensitive and least prone to false positives. It also provides detailed structural information of the protein-fragment complex at the atomic level. Fragment-based screening using X-ray crystallography is therefore an efficient method for identifying binding hotspots on proteins, which can then be exploited by chemists and biologists for the discovery of new drugs. The use of FBDD is illustrated here with a recently published case study of a drug discovery programme targeting the challenging protein-protein interaction Kelch-like ECH-associated protein 1:nuclear factor erythroid 2-related factor 2. © 2017 The Author(s). Published by Portland Press Limited on behalf of the Biochemical Society.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Small, Leo J.; Pratt, Harry D.; Staiger, Chad L.

We present a systematic approach for increasing the concentration of redox-active species in electrolytes for nonaqueous redox flow batteries (RFBs). Starting with an ionic liquid consisting of a metal coordination cation (MetIL), ferrocene-containing ligands and iodide anions are substituted incrementally into the structure. While chemical structures can be drawn for molecules with 10 m redox-active electrons (RAE), practical limitations such as melting point and phase stability constrain the structures to 4.2 m RAE, a 2.3× improvement over the original MetIL. Dubbed “MetILs 3,” these ionic liquids possess redox activity in the cation core, ligands, and anions. Throughout all compositions, infraredmore » spectroscopy shows the ethanolamine-based ligands primarily coordinate to the Fe 2+ core via hydroxyl groups. Calorimetry conveys a profound change in thermophysical properties, not only in melting temperature but also in suppression of a cold crystallization only observed in the original MetIL. Square wave voltammetry reveals redox processes characteristic of each molecular location. Testing a laboratory-scale RFB demonstrates Coulombic efficiencies >95% and increased voltage efficiencies due to more facile redox kinetics, effectively increasing capacity 4×. Application of this strategy to other chemistries, optimizing melting point and conductivity, can yield >10 m RAE, making nonaqueous RFB a viable technology for grid scale storage.« less

Directional learning, but no spatial mapping by rats performing a navigational task in an inverted orientation

PubMed Central

Valerio, Stephane; Clark, Benjamin J.; Chan, Jeremy H. M.; Frost, Carlton P.; Harris, Mark J.; Taube, Jeffrey S.

2010-01-01

Previous studies have identified neurons throughout the rat limbic system that fire as a function of the animal's head direction (HD). This HD signal is particularly robust when rats locomote in the horizontal and vertical planes, but is severely attenuated when locomoting upside-down (Calton & Taube, 2005). Given the hypothesis that the HD signal represents an animal's sense of its directional heading, we evaluated whether rats could accurately navigate in an inverted (upside-down) orientation. The task required the animals to find an escape hole while locomoting inverted on a circular platform suspended from the ceiling. In experiment 1, Long-Evans rats were trained to navigate to the escape hole by locomoting from either one or four start points. Interestingly, no animals from the 4-start point group reached criterion, even after 30 days of training. Animals in the 1-start point group reached criterion after about 6 training sessions. In Experiment 2, probe tests revealed that animals navigating from either 1- or 2-start points utilized distal visual landmarks for accurate orientation. However, subsequent probe tests revealed that their performance was markedly attenuated when required to navigate to the escape hole from a novel starting point. This absence of flexibility while navigating upside-down was confirmed in experiment 3 where we show that the rats do not learn to reach a place, but instead learn separate trajectories to the target hole(s). Based on these results we argue that inverted navigation primarily involves a simple directional strategy based on visual landmarks. PMID:20109566

A Non-Canonical Initiation Site Is Required for Efficient Translation of the Dendritically Localized Shank1 mRNA

PubMed Central

Studtmann, Katrin; Ölschläger-Schütt, Janin; Buck, Friedrich; Richter, Dietmar; Sala, Carlo; Bockmann, Jürgen; Kindler, Stefan; Kreienkamp, Hans-Jürgen

2014-01-01

Local protein synthesis in dendrites enables neurons to selectively change the protein complement of individual postsynaptic sites. Though it is generally assumed that this mechanism requires tight translational control of dendritically transported mRNAs, it is unclear how translation of dendritic mRNAs is regulated. We have analyzed here translational control elements of the dendritically localized mRNA coding for the postsynaptic scaffold protein Shank1. In its 5′ region, the human Shank1 mRNA exhibits two alternative translation initiation sites (AUG+1 and AUG+214), three canonical upstream open reading frames (uORFs1-3) and a high GC content. In reporter assays, fragments of the 5′UTR with high GC content inhibit translation, suggesting a contribution of secondary structures. uORF3 is most relevant to translation control as it overlaps with the first in frame start codon (AUG+1), directing translation initiation to the second in frame start codon (AUG+214). Surprisingly, our analysis points to an additional uORF initiated at a non-canonical ACG start codon. Mutation of this start site leads to an almost complete loss of translation initiation at AUG+1, demonstrating that this unconventional uORF is required for Shank1 synthesis. Our data identify a novel mechanism whereby initiation at a non-canonical site allows for translation of the main Shank1 ORF despite a highly structured 5′UTR. PMID:24533096

Designing a Feasibility Study: A Starting Point for Considering New Management Initiatives for Working Parents.

ERIC Educational Resources Information Center

Friedman, Dana E.

This brief paper was prepared as a starting point for employers considering the adoption of a new management initiative for working parents. It is not an exhaustive outline of all considerations in the decision-making process, nor does it provide solutions to all the known pitfalls. It does, however, suggest the potential scope and complexity of…

An Investigation of Starting Point Preferences in Human Performance on Traveling Salesman Problems

ERIC Educational Resources Information Center

MacGregor, James N.

2014-01-01

Previous studies have shown that people start traveling sales problem tours significantly more often from boundary than from interior nodes. There are a number of possible reasons for such a tendency: first, it may arise as a direct result of the processes involved in tour construction; second, boundary points may be perceptually more salient than…

Screening the Medicines for Malaria Venture Pathogen Box across Multiple Pathogens Reclassifies Starting Points for Open-Source Drug Discovery

PubMed Central

Sykes, Melissa L.; Jones, Amy J.; Shelper, Todd B.; Simpson, Moana; Lang, Rebecca; Poulsen, Sally-Ann; Sleebs, Brad E.

2017-01-01

ABSTRACT Open-access drug discovery provides a substantial resource for diseases primarily affecting the poor and disadvantaged. The open-access Pathogen Box collection is comprised of compounds with demonstrated biological activity against specific pathogenic organisms. The supply of this resource by the Medicines for Malaria Venture has the potential to provide new chemical starting points for a number of tropical and neglected diseases, through repurposing of these compounds for use in drug discovery campaigns for these additional pathogens. We tested the Pathogen Box against kinetoplastid parasites and malaria life cycle stages in vitro. Consequently, chemical starting points for malaria, human African trypanosomiasis, Chagas disease, and leishmaniasis drug discovery efforts have been identified. Inclusive of this in vitro biological evaluation, outcomes from extensive literature reviews and database searches are provided. This information encompasses commercial availability, literature reference citations, other aliases and ChEMBL number with associated biological activity, where available. The release of this new data for the Pathogen Box collection into the public domain will aid the open-source model of drug discovery. Importantly, this will provide novel chemical starting points for drug discovery and target identification in tropical disease research. PMID:28674055

Screening the Medicines for Malaria Venture Pathogen Box across Multiple Pathogens Reclassifies Starting Points for Open-Source Drug Discovery.

PubMed

Duffy, Sandra; Sykes, Melissa L; Jones, Amy J; Shelper, Todd B; Simpson, Moana; Lang, Rebecca; Poulsen, Sally-Ann; Sleebs, Brad E; Avery, Vicky M

2017-09-01

Open-access drug discovery provides a substantial resource for diseases primarily affecting the poor and disadvantaged. The open-access Pathogen Box collection is comprised of compounds with demonstrated biological activity against specific pathogenic organisms. The supply of this resource by the Medicines for Malaria Venture has the potential to provide new chemical starting points for a number of tropical and neglected diseases, through repurposing of these compounds for use in drug discovery campaigns for these additional pathogens. We tested the Pathogen Box against kinetoplastid parasites and malaria life cycle stages in vitro Consequently, chemical starting points for malaria, human African trypanosomiasis, Chagas disease, and leishmaniasis drug discovery efforts have been identified. Inclusive of this in vitro biological evaluation, outcomes from extensive literature reviews and database searches are provided. This information encompasses commercial availability, literature reference citations, other aliases and ChEMBL number with associated biological activity, where available. The release of this new data for the Pathogen Box collection into the public domain will aid the open-source model of drug discovery. Importantly, this will provide novel chemical starting points for drug discovery and target identification in tropical disease research. Copyright © 2017 Duffy et al.

JumpStart III Final Report.

ERIC Educational Resources Information Center

Cohen, Arthur M.; Brawer, Florence B.; Kozeracki, Carol A.

This final report for the JumpStart III program presents a summary of the entrepreneurship training programs developed by each of the four JumpStart III partners selected in March 1997. Grants for the colleges totaled $354,546 over 2 years. The Jumpstart funding has been only a starting point for these and the other 12 Jumpstart partners in…

Resource efficiency and culture--workplace training for small and medium-sized enterprises.

PubMed

Bliesner, Anna; Liedtke, Christa; Rohn, Holger

2014-05-15

Although there are already some qualification offers available for enterprises to support resource efficiency innovations, the high potentials that can be identified especially for small and medium sized enterprises (SMEs) have not been activated until now. As successful change lies in the hands of humans, the main aim of vocational education has to be the promotion of organisational and cultural changes in the enterprises. As there is already a small but increasing number of enterprises that perform very well in resource efficiency innovations one question arises: What are typical characteristics of those enterprises? Leaning on a good-practice approach, the project "ResourceCulture" is going to prove or falsify the hypothesis that enterprises being successful with resource efficiency innovations have a specific culture of trust, which substantially contributes to innovation processes, or even initially enables them. Detailed empirical field research will light up which correlations between resource efficiency, innovation and cultures of trust can be found and will offer important aspects for the improvement of management instruments and qualification concepts for workplace training. The project seizes qualification needs that were likewise mentioned by enterprises and consultants, regarding the implementation of resource efficiency. This article - based on first empirical field research results - derives preliminary indications for the design of the qualification module for the target groups resource efficiency consultants and managers. On this basis and in order to implement "ResourceCulture" conceptual and methodological starting points for workplace training are outlined. Copyright © 2013 Elsevier B.V. All rights reserved.

Compensatable muon collider calorimeter with manageable backgrounds

DOEpatents

Raja, Rajendran

2015-02-17

A method and system for reducing background noise in a particle collider, comprises identifying an interaction point among a plurality of particles within a particle collider associated with a detector element, defining a trigger start time for each of the pixels as the time taken for light to travel from the interaction point to the pixel and a trigger stop time as a selected time after the trigger start time, and collecting only detections that occur between the start trigger time and the stop trigger time in order to thereafter compensate the result from the particle collider to reduce unwanted background detection.

Engine management during NTRE start up

NASA Technical Reports Server (NTRS)

Bulman, Mel; Saltzman, Dave

1993-01-01

The topics are presented in viewgraph form and include the following: total engine system management critical to successful nuclear thermal rocket engine (NTRE) start up; NERVA type engine start windows; reactor power control; heterogeneous reactor cooling; propellant feed system dynamics; integrated NTRE start sequence; moderator cooling loop and efficient NTRE starting; analytical simulation and low risk engine development; accurate simulation through dynamic coupling of physical processes; and integrated NTRE and mission performance.

Combinatorial and High Throughput Discovery of High Temperature Piezoelectric Ceramics

DTIC Science & Technology

2011-10-10

the known candidate piezoelectric ferroelectric perovskites. Unlike most computational studies on crystal chemistry, where the starting point is some...studies on crystal chemistry, where the starting point is some form of electronic structure calculation, we use a data driven approach to initiate our...experimental measurements reported in the literature. Given that our models are based solely on crystal and electronic structure data and did not

Starting Up a Company in a Mature Market: Wise or Foolish ?

NASA Astrophysics Data System (ADS)

Biberger, Maximilian

SDCmaterials, Inc. (SDC) is a venture backed, mature start up in the automotive sector. Moreover: Catalytic Converters for vehicles and stationary applications. The company has invented and developed environmentally friendly, novel materials as well as material integration techniques for catalytic converters based on a proprietary and patented nanotechnology. Traditionally catalysts require large amounts of PGMs (Platinum Group Metals), more than USD 10B per year, in order to treat vehicle emissions. Due to that, the catalytic converter is the single most expensive piece part in a vehicle. The currently used technologies have served the industry well. However, as emission standards dramatically tighten, particularly in China, the demand for more fuel efficient and Hybrid vehicles increases, this technology begins to start showing limitations as it can meet the aforementioned demands only by increasing the PGM amount per vehicle. This in turn will increase the cost per vehicle and / or reduce margins for the automotive industry, and in addition to that impact the environment negatively. In contrast to existing technologies, the SDC based technology can meet future emission goals by maintaining, or even reducing, the PGM amount required to treat exhaust emissions. This results in tremendous savings for the consumer and the automotive industry, as well as a significantly better stewardship of natural resources and clean manufacturing. In the present paper the pros and cons of starting a nanotechnology company in a mature market are presented. Both from a business & economics, as well as from a technology point of view. The case is made that it is possible to start a company in a mature market and that novel technologies can compete economically with 40+ old year technologies.

Favoring the unfavored: Selective electrochemical nitrogen fixation using a reticular chemistry approach

PubMed Central

Lee, Hiang Kwee; Koh, Charlynn Sher Lin; Lee, Yih Hong; Liu, Chong; Phang, In Yee; Han, Xuemei; Tsung, Chia-Kuang; Ling, Xing Yi

2018-01-01

Electrochemical nitrogen-to-ammonia fixation is emerging as a sustainable strategy to tackle the hydrogen- and energy-intensive operations by Haber-Bosch process for ammonia production. However, current electrochemical nitrogen reduction reaction (NRR) progress is impeded by overwhelming competition from the hydrogen evolution reaction (HER) across all traditional NRR catalysts and the requirement for elevated temperature/pressure. We achieve both excellent NRR selectivity (~90%) and a significant boost to Faradic efficiency by 10 percentage points even at ambient operations by coating a superhydrophobic metal-organic framework (MOF) layer over the NRR electrocatalyst. Our reticular chemistry approach exploits MOF’s water-repelling and molecular-concentrating effects to overcome HER-imposed bottlenecks, uncovering the unprecedented electrochemical features of NRR critical for future theoretical studies. By favoring the originally unfavored NRR, we envisage our electrocatalytic design as a starting point for high-performance nitrogen-to-ammonia electroconversion directly from water vapor–abundant air to address increasing global demand of ammonia in (bio)chemical and energy industries. PMID:29536047

Improving Operating Room Efficiency: First Case On-Time Start Project.

PubMed

Phieffer, Laura; Hefner, Jennifer L; Rahmanian, Armin; Swartz, Jason; Ellison, Christopher E; Harter, Ronald; Lumbley, Joshua; Moffatt-Bruce, Susan D

Operating rooms (ORs) are costly to run, and multiple factors influence efficiency. The first case on-time start (FCOS) of an OR is viewed as a harbinger of efficiency for the daily schedule. Across 26 ORs of a large, academic medical center, only 49% of cases started on time in October 2011. The Perioperative Services Department engaged an interdisciplinary Operating Room Committee to apply Six Sigma tools to this problem. The steps of this project included (1) problem mapping, (2) process improvements to preoperative readiness, (3) informatics support improvements, and (4) continuous measurement and feedback. By June 2013, there was a peak of 92% first case on-time starts across service lines, decreasing to 78% through 2014, still significantly above the preintervention level of 49% (p = .000). Delay minutes also significantly decreased through the study period (p = .000). Across 2013, the most common delay owners were the patient, the surgeon, the facility, and the anesthesia department. Continuous and sustained improvement of first case on-time starts is attributed to tracking the FCOS metric, establishing embedded process improvement resources and creating transparency of data. This article highlights success factors and barriers to program success and sustainability.

Ophthalmology and vision science research: part 5: surfing or sieving--using literature databases wisely.

PubMed

Sherwin, Trevor; Gilhotra, Amardeep K

2006-02-01

Literature databases are an ever-expanding resource available to the field of medical sciences. Understanding how to use such databases efficiently is critical for those involved in research. However, for the uninitiated, getting started is a major hurdle to overcome and for the occasional user, the finer points of database searching remain an unacquired skill. In the fifth and final article in this series aimed at those embarking on ophthalmology and vision science research, we look at how the beginning researcher can start to use literature databases and, by using a stepwise approach, how they can optimize their use. This instructional paper gives a hypothetical example of a researcher writing a review article and how he or she acquires the necessary scientific literature for the article. A prototype search of the Medline database is used to illustrate how even a novice might swiftly acquire the skills required for a medium-level search. It provides examples and key tips that can increase the proficiency of the occasional user. Pitfalls of database searching are discussed, as are the limitations of which the user should be aware.

Evolving artificial metalloenzymes via random mutagenesis

NASA Astrophysics Data System (ADS)

Yang, Hao; Swartz, Alan M.; Park, Hyun June; Srivastava, Poonam; Ellis-Guardiola, Ken; Upp, David M.; Lee, Gihoon; Belsare, Ketaki; Gu, Yifan; Zhang, Chen; Moellering, Raymond E.; Lewis, Jared C.

2018-03-01

Random mutagenesis has the potential to optimize the efficiency and selectivity of protein catalysts without requiring detailed knowledge of protein structure; however, introducing synthetic metal cofactors complicates the expression and screening of enzyme libraries, and activity arising from free cofactor must be eliminated. Here we report an efficient platform to create and screen libraries of artificial metalloenzymes (ArMs) via random mutagenesis, which we use to evolve highly selective dirhodium cyclopropanases. Error-prone PCR and combinatorial codon mutagenesis enabled multiplexed analysis of random mutations, including at sites distal to the putative ArM active site that are difficult to identify using targeted mutagenesis approaches. Variants that exhibited significantly improved selectivity for each of the cyclopropane product enantiomers were identified, and higher activity than previously reported ArM cyclopropanases obtained via targeted mutagenesis was also observed. This improved selectivity carried over to other dirhodium-catalysed transformations, including N-H, S-H and Si-H insertion, demonstrating that ArMs evolved for one reaction can serve as starting points to evolve catalysts for others.

Lignocellulose pretreatment in a fungus-cultivating termite

DOE PAGES

Li, Hongjie; Yelle, Daniel J.; Li, Chang; ...

2017-04-19

Depolymerizing lignin, the complex phenolic polymer fortifying plant cell walls, is an essential but challenging starting point for the lignocellulosics industries. The variety of ether– and carbon–carbon interunit linkages produced via radical coupling during lignification limit chemical and biological depolymerization efficiency. In an ancient fungus-cultivating termite system, we reveal unprecedentedly rapid lignin depolymerization and degradation by combining laboratory feeding experiments, lignocellulosic compositional measurements, electron microscopy, 2D-NMR, and thermochemolysis. In a gut transit time of under 3.5 h, in young worker termites, poplar lignin sidechains are extensively cleaved and the polymer is significantly depleted, leaving a residue almost completely devoid ofmore » various condensed units that are traditionally recognized to be the most recalcitrant. Subsequently, the fungus-comb microbiome preferentially uses xylose and cleaves polysaccharides, thus facilitating final utilization of easily digestible oligosaccharides by old worker termites. This complementary symbiotic pretreatment process in the fungus-growing termite symbiosis reveals a previously unappreciated natural system for efficient lignocellulose degradation.« less

Large Deviations for Nonlocal Stochastic Neural Fields

PubMed Central

2014-01-01

We study the effect of additive noise on integro-differential neural field equations. In particular, we analyze an Amari-type model driven by a Q-Wiener process, and focus on noise-induced transitions and escape. We argue that proving a sharp Kramers’ law for neural fields poses substantial difficulties, but that one may transfer techniques from stochastic partial differential equations to establish a large deviation principle (LDP). Then we demonstrate that an efficient finite-dimensional approximation of the stochastic neural field equation can be achieved using a Galerkin method and that the resulting finite-dimensional rate function for the LDP can have a multiscale structure in certain cases. These results form the starting point for an efficient practical computation of the LDP. Our approach also provides the technical basis for further rigorous study of noise-induced transitions in neural fields based on Galerkin approximations. Mathematics Subject Classification (2000): 60F10, 60H15, 65M60, 92C20. PMID:24742297

Community detection for fluorescent lifetime microscopy image segmentation

NASA Astrophysics Data System (ADS)

Hu, Dandan; Sarder, Pinaki; Ronhovde, Peter; Achilefu, Samuel; Nussinov, Zohar

2014-03-01

Multiresolution community detection (CD) method has been suggested in a recent work as an efficient method for performing unsupervised segmentation of fluorescence lifetime (FLT) images of live cell images containing fluorescent molecular probes.1 In the current paper, we further explore this method in FLT images of ex vivo tissue slices. The image processing problem is framed as identifying clusters with respective average FLTs against a background or "solvent" in FLT imaging microscopy (FLIM) images derived using NIR fluorescent dyes. We have identified significant multiresolution structures using replica correlations in these images, where such correlations are manifested by information theoretic overlaps of the independent solutions ("replicas") attained using the multiresolution CD method from different starting points. In this paper, our method is found to be more efficient than a current state-of-the-art image segmentation method based on mixture of Gaussian distributions. It offers more than 1:25 times diversity based on Shannon index than the latter method, in selecting clusters with distinct average FLTs in NIR FLIM images.

Lignocellulose pretreatment in a fungus-cultivating termite

PubMed Central

Li, Hongjie; Yelle, Daniel J.; Li, Chang; Yang, Mengyi; Ke, Jing; Zhang, Ruijuan; Liu, Yu; Zhu, Na; Liang, Shiyou; Mo, Xiaochang; Currie, Cameron R.; Mo, Jianchu

2017-01-01

Depolymerizing lignin, the complex phenolic polymer fortifying plant cell walls, is an essential but challenging starting point for the lignocellulosics industries. The variety of ether– and carbon–carbon interunit linkages produced via radical coupling during lignification limit chemical and biological depolymerization efficiency. In an ancient fungus-cultivating termite system, we reveal unprecedentedly rapid lignin depolymerization and degradation by combining laboratory feeding experiments, lignocellulosic compositional measurements, electron microscopy, 2D-NMR, and thermochemolysis. In a gut transit time of under 3.5 h, in young worker termites, poplar lignin sidechains are extensively cleaved and the polymer is significantly depleted, leaving a residue almost completely devoid of various condensed units that are traditionally recognized to be the most recalcitrant. Subsequently, the fungus-comb microbiome preferentially uses xylose and cleaves polysaccharides, thus facilitating final utilization of easily digestible oligosaccharides by old worker termites. This complementary symbiotic pretreatment process in the fungus-growing termite symbiosis reveals a previously unappreciated natural system for efficient lignocellulose degradation. PMID:28424249

Lignocellulose pretreatment in a fungus-cultivating termite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Hongjie; Yelle, Daniel J.; Li, Chang

Depolymerizing lignin, the complex phenolic polymer fortifying plant cell walls, is an essential but challenging starting point for the lignocellulosics industries. The variety of ether– and carbon–carbon interunit linkages produced via radical coupling during lignification limit chemical and biological depolymerization efficiency. In an ancient fungus-cultivating termite system, we reveal unprecedentedly rapid lignin depolymerization and degradation by combining laboratory feeding experiments, lignocellulosic compositional measurements, electron microscopy, 2D-NMR, and thermochemolysis. In a gut transit time of under 3.5 h, in young worker termites, poplar lignin sidechains are extensively cleaved and the polymer is significantly depleted, leaving a residue almost completely devoid ofmore » various condensed units that are traditionally recognized to be the most recalcitrant. Subsequently, the fungus-comb microbiome preferentially uses xylose and cleaves polysaccharides, thus facilitating final utilization of easily digestible oligosaccharides by old worker termites. This complementary symbiotic pretreatment process in the fungus-growing termite symbiosis reveals a previously unappreciated natural system for efficient lignocellulose degradation.« less

Assessment of emissions and removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) at start-up periods in a hazardous waste incinerator.

PubMed

Karademir, Aykan; Korucu, M Kemal

2013-07-01

A study was conducted to observe the changes in polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) levels and congener profiles in the flue gas of a hazardous waste incinerator during two start-up periods. Flue gas samplings were performed simultaneously through Air Pollution Control Devices (APCDs) (including boiler outlet, electrostatic precipitator (ESP) outlet, wet scrubbers (WS) outlet, and activated carbon (AC) filter outlet) in different combustion temperatures during a planned cold (long) start-up and an unplanned warm (short) start-up. The results showed that PCDD/F concentrations could be elevated during the start-up periods up to levels 3-4 times higher than those observed in the normal operation. Especially lower combustion temperatures in the short start-ups may cause high PCDD/F concentrations in the raw flue gas. Assessment of combustion temperatures and Furans/Dioxins values indicated that surface-catalyzed de novo synthesis was the dominant pathway in the formation of PCDD/Fs in the combustion units. PCDD/F removal efficiencies of Air Pollution Control Devices suggested that formation by de novo synthesis existed in ESP also when in operation, leading to increase of gaseous phase PCDD/Fs in ESP Particle-bound PCDD/Fs were removed mainly by ESP and WS, while gaseous phase PCDD/Fs were removed by WS, and more efficiently by AC filter. This paper evaluates PCDD/F emissions and removal performances of APCDs (ESP, wet scrubbers, and activated carbon) during two start-up periods in an incinerator. The main implications are the following: (1) start-up periods increase PCDD/F emissions up to 2-3 times in the incinerator; (2) low combustion temperatures in start-ups cause high PCDD/F emissions in raw gas; (3) formation of PCDD/Fs by de novo synthesis occurs in ESP; (4) AC is efficient in removing gaseous PCDD/Fs, but may increase particle-bound ones; and (5) scrubbers remove both gaseous and particle-bound PCDD/Fs efficiently.

Automatic pole-like object modeling via 3D part-based analysis of point cloud

NASA Astrophysics Data System (ADS)

He, Liu; Yang, Haoxiang; Huang, Yuchun

2016-10-01

Pole-like objects, including trees, lampposts and traffic signs, are indispensable part of urban infrastructure. With the advance of vehicle-based laser scanning (VLS), massive point cloud of roadside urban areas becomes applied in 3D digital city modeling. Based on the property that different pole-like objects have various canopy parts and similar trunk parts, this paper proposed the 3D part-based shape analysis to robustly extract, identify and model the pole-like objects. The proposed method includes: 3D clustering and recognition of trunks, voxel growing and part-based 3D modeling. After preprocessing, the trunk center is identified as the point that has local density peak and the largest minimum inter-cluster distance. Starting from the trunk centers, the remaining points are iteratively clustered to the same centers of their nearest point with higher density. To eliminate the noisy points, cluster border is refined by trimming boundary outliers. Then, candidate trunks are extracted based on the clustering results in three orthogonal planes by shape analysis. Voxel growing obtains the completed pole-like objects regardless of overlaying. Finally, entire trunk, branch and crown part are analyzed to obtain seven feature parameters. These parameters are utilized to model three parts respectively and get signal part-assembled 3D model. The proposed method is tested using the VLS-based point cloud of Wuhan University, China. The point cloud includes many kinds of trees, lampposts and other pole-like posters under different occlusions and overlaying. Experimental results show that the proposed method can extract the exact attributes and model the roadside pole-like objects efficiently.

Re-starting smoking in the postpartum period after receiving a smoking cessation intervention: a systematic review.

PubMed

Jones, Matthew; Lewis, Sarah; Parrott, Steve; Wormall, Stephen; Coleman, Tim

2016-06-01

In pregnant smoking cessation trial participants, to estimate (1) among women abstinent at the end of pregnancy, the proportion who re-start smoking at time-points afterwards (primary analysis) and (2) among all trial participants, the proportion smoking at the end of pregnancy and at selected time-points during the postpartum period (secondary analysis). Trials identified from two Cochrane reviews plus searches of Medline and EMBASE. Twenty-seven trials were included. The included trials were randomized or quasi-randomized trials of within-pregnancy cessation interventions given to smokers who reported abstinence both at end of pregnancy and at one or more defined time-points after birth. Outcomes were validated biochemically and self-reported continuous abstinence from smoking and 7-day point prevalence abstinence. The primary random-effects meta-analysis used longitudinal data to estimate mean pooled proportions of re-starting smoking; a secondary analysis used cross-sectional data to estimate the mean proportions smoking at different postpartum time-points. Subgroup analyses were performed on biochemically validated abstinence. The pooled mean proportion re-starting at 6 months postpartum was 43% [95% confidence interval (CI) = 16-72%, I(2)  = 96.7%] (11 trials, 571 abstinent women). The pooled mean proportion smoking at the end of pregnancy was 87% (95% CI = 84-90%, I(2)  = 93.2%) and 94% (95% CI = 92-96%, I(2)  = 88%) at 6 months postpartum (23 trials, 9262 trial participants). Findings were similar when using biochemically validated abstinence. In clinical trials of smoking cessation interventions during pregnancy only 13% are abstinent at term. Of these, 43% re-start by 6 months postpartum. © 2016 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

Optimal Analysis of Left Atrial Strain by Speckle Tracking Echocardiography: P-wave versus R-wave Trigger.

PubMed

Hayashi, Shuji; Yamada, Hirotsugu; Bando, Mika; Saijo, Yoshihito; Nishio, Susumu; Hirata, Yukina; Klein, Allan L; Sata, Masataka

2015-08-01

Left atrial (LA) strain analysis using speckle tracking echocardiography is useful for assessing LA function. However, there is no established procedure for this method. Most investigators have determined the electrocardiographic R-wave peak as the starting point for LA strain analysis. To test our hypothesis that P-wave onset should be used as the starting point, we measured LA strain using 2 different starting points and compared the strain values with the corresponding LA volume indices obtained by three-dimensional (3D) echocardiography. We enrolled 78 subjects (61 ± 17 years, 25 males) with and without various cardiac diseases in this study and assessed global longitudinal LA strain by two-dimensional speckle tracking strain echocardiography using EchoPac software. We used either R-wave peak or P-wave onset as the starting point for determining LA strains during the reservoir (Rres, Pres), conduit (Rcon, Pcon), and booster pump (Rpump, Ppump) phases. We determined the maximum, minimum, and preatrial contraction LA volumes, and calculated the LA total, passive, and active emptying fractions using 3D echocardiography. The correlation between Pres and LA total emptying fraction was better than the correlation between Rres and LA total emptying fraction (r = 0.458 vs. 0.308, P = 0.026). Pcon and Ppump exhibited better correlation with the corresponding 3D echocardiographic parameters than Rcon (r = 0.560 vs. 0.479, P = 0.133) and Rpump (r = 0.577 vs. 0.345, P = 0.003), respectively. LA strain in any phase should be analyzed using P-wave onset as the starting point rather than R-wave peak. © 2014, Wiley Periodicals, Inc.

Automatic derivation of natural and artificial lineaments from ALS point clouds in floodplains

NASA Astrophysics Data System (ADS)

Mandlburger, G.; Briese, C.

2009-04-01

Water flow is one of the most important driving forces in geomorphology and river systems have ever since formed our landscapes. With increasing urbanisation fertile flood plains were more and more cultivated and the defence of valuable settlement areas by dikes and dams became an important issue. Today, we are dealing with landscapes built up by natural as well as man-made artificial forces. In either case the general shape of the terrain can be portrayed by lineaments representing discontinuities of the terrain slope. Our contribution, therefore, presents an automatic method for delineating natural and artificial structure lines based on randomly distributed point data with high density of more than one point/m2. Preferably, the last echoes of airborne laser scanning (ALS) point clouds are used, since the laser signal is able to penetrate vegetation through small gaps in the foliage. Alternatively, point clouds from (multi) image matching can be employed, but poor ground point coverage in vegetated areas is often the limiting factor. Our approach is divided into three main steps: First, potential 2D start segments are detected by analyzing the surface curvature in the vicinity of each data point, second, the detailed 3D progression of each structure line is modelled patch-wise by intersecting surface pairs (e.g. planar patch pairs) based on the detected start segments and by performing line growing and, finally, post-processing like line cleaning, smoothing and networking is carried out in a last step. For the initial detection of start segments a best fitting two dimensional polynomial surface (quadric) is computed in each data point based on a set of neighbouring points, from which the minimum and maximum curvature is derived. Patches showing high maximum and low minimum curvatures indicate linear discontinuities in the surface slope and serve as start segments for the subsequent 3D modelling. Based on the 2D location and orientation of the start segments, surface patches can be identified as to the left or the right of the structure line. For each patch pair the intersection line is determined by least squares adjustment. The stochastic model considers the planimetric accuracy of the start segments, and the vertical measurement errors in the data points. A robust estimation approach is embedded in the patch adjustment for elimination of off-terrain ALS last echo points. Starting from an initial patch pair, structure line modelling is continued in forward and backward direction as long as certain thresholds (e.g. minimum surface intersection angles) are fulfilled. In the final post-processing step the resulting line set is cleaned by connecting corresponding line parts, by removing short line strings of minor relevance, and by thinning the resulting line set with respect to a certain approximation tolerance in order to reduce the amount of line data. Thus, interactive human verification and editing is limited to a minimum. In a real-world example structure lines were computed for a section of the river Main (ALS, last echoes, 4 points/m2) demonstrating the high potential of the proposed method with respect to accuracy and completeness. Terrestrial control measurements have confirmed the high accuracy expectations both in planimetry (<0.4m) and height (<0.2m).

Voltage Controller Saves Energy, Prolongs Life of Motors

NASA Technical Reports Server (NTRS)

2007-01-01

In 1985, Power Efficiency Corporation of Las Vegas licensed NASA voltage controller technology from Marshall Space Flight Center. In the following years, Power Efficiency made patented improvements to the technology and marketed the resulting products throughout the world as the Performance Controller and the Power Efficiency energy-saving soft start. Soft start gradually introduces power to an electric motor, thus eliminating the harsh, violent mechanical stresses of having the device go from a dormant state to one of full activity; prevents it from running too hot; and increases the motor's lifetime. The product can pay for itself through the reduction in electricity consumed (according to Power Efficiency, within 3 years), depending on the duty cycle of the motor and the prevailing power rates. In many instances, the purchaser is eligible for special utility rebates for the environmental protection it provides. Common applications of Power Efficiency's soft start include mixers, grinders, granulators, conveyors, crushers, stamping presses, injection molders, elevators with MG sets, and escalators. The device has been retrofitted onto equipment at major department store chains, hotels, airports, universities, and for various manufacturers

Control of the low-load region in partially premixed combustion

NASA Astrophysics Data System (ADS)

Ingesson, Gabriel; Yin, Lianhao; Johansson, Rolf; Tunestal, Per

2016-09-01

Partially premixed combustion (PPC) is a low temperature, direct-injection combustion concept that has shown to give promising emission levels and efficiencies over a wide operating range. In this concept, high EGR ratios, high octane-number fuels and early injection timings are used to slow down the auto-ignition reactions and to enhance the fuel and are mixing before the start of combustion. A drawback with this concept is the combustion stability in the low-load region where a high octane-number fuel might cause misfire and low combustion efficiency. This paper investigates the problem of low-load PPC controller design for increased engine efficiency. First, low-load PPC data, obtained from a multi-cylinder heavy- duty engine is presented. The data shows that combustion efficiency could be increased by using a pilot injection and that there is a non-linearity in the relation between injection and combustion timing. Furthermore, intake conditions should be set in order to avoid operating points with unfavourable global equivalence ratio and in-cylinder temperature combinations. Model predictive control simulations were used together with a calibrated engine model to find a gas-system controller that fulfilled this task. The findings are then summarized in a suggested engine controller design. Finally, an experimental performance evaluation of the suggested controller is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Woohyun; Katipamula, Srinivas; Lutes, Robert G.

Small- and medium-sized (<100,000 sf) commercial buildings (SMBs) represent over 95% of the U.S. commercial building stock and consume over 60% of total site energy consumption. Many of these buildings use rudimentary controls that are mostly manual, with limited scheduling capability, no monitoring or failure management. Therefore, many of these buildings are operated inefficiently and consume excess energy. SMBs typically utilize packaged rooftop units (RTUs) that are controlled by an individual thermostat. There is increased urgency to improve the operating efficiency of existing commercial building stock in the U.S. for many reasons, chief among them is to mitigate the climatemore » change impacts. Studies have shown that managing set points and schedules of the RTUs will result in up to 20% energy and cost savings. Another problem associated with RTUs is short-cycling, where an RTU goes through ON and OFF cycles too frequently. Excessive cycling can lead to excessive wear and lead to premature failure of the compressor or its components. The short cycling can result in a significantly decreased average efficiency (up to 10%), even if there are no physical failures in the equipment. Also, SMBs use a time-of-day scheduling is to start the RTUs before the building will be occupied and shut it off when unoccupied. Ensuring correct use of the zone set points and eliminating frequent cycling of RTUs thereby leading to persistent building operations can significantly increase the operational efficiency of the SMBs. A growing trend is to use low-cost control infrastructure that can enable scalable and cost-effective intelligent building operations. The work reported in this report describes three algorithms for detecting the zone set point temperature, RTU cycling rate and occupancy schedule detection that can be deployed on the low-cost infrastructure. These algorithms only require the zone temperature data for detection. The algorithms have been tested and validated using field data from a number of RTUs from six buildings in different climate locations. Overall, the algorithms were successful in detecting the set points and ON/OFF cycles accurately using the peak detection technique and occupancy schedule using symbolic aggregate approximation technique. The report describes the three algorithms, results from testing the algorithms using field data, how the algorithms can be used to improve SMBs efficiency, and presents related conclusions.« less

Robust point matching via vector field consensus.

PubMed

Jiayi Ma; Ji Zhao; Jinwen Tian; Yuille, Alan L; Zhuowen Tu

2014-04-01

In this paper, we propose an efficient algorithm, called vector field consensus, for establishing robust point correspondences between two sets of points. Our algorithm starts by creating a set of putative correspondences which can contain a very large number of false correspondences, or outliers, in addition to a limited number of true correspondences (inliers). Next, we solve for correspondence by interpolating a vector field between the two point sets, which involves estimating a consensus of inlier points whose matching follows a nonparametric geometrical constraint. We formulate this a maximum a posteriori (MAP) estimation of a Bayesian model with hidden/latent variables indicating whether matches in the putative set are outliers or inliers. We impose nonparametric geometrical constraints on the correspondence, as a prior distribution, using Tikhonov regularizers in a reproducing kernel Hilbert space. MAP estimation is performed by the EM algorithm which by also estimating the variance of the prior model (initialized to a large value) is able to obtain good estimates very quickly (e.g., avoiding many of the local minima inherent in this formulation). We illustrate this method on data sets in 2D and 3D and demonstrate that it is robust to a very large number of outliers (even up to 90%). We also show that in the special case where there is an underlying parametric geometrical model (e.g., the epipolar line constraint) that we obtain better results than standard alternatives like RANSAC if a large number of outliers are present. This suggests a two-stage strategy, where we use our nonparametric model to reduce the size of the putative set and then apply a parametric variant of our approach to estimate the geometric parameters. Our algorithm is computationally efficient and we provide code for others to use it. In addition, our approach is general and can be applied to other problems, such as learning with a badly corrupted training data set.

33 CFR 165.704 - Safety Zone; Tampa Bay, Florida.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety zone starts at Tampa Bay Cut “F” Channel from Lighted Buoys “3F” and “4F” and proceeds north ending at Gadsden Point Cut Lighted Buoys “3” and “4”. The safety zone starts again at Gadsden Point Cut Lighted Buoys “7” and “8” and proceeds north through Hillsborough Cut “C”, Port Sutton Entrance Channel...

[Disputes and history of fetal heart monitoring].

PubMed

Dueñas-García, Omar Felipe; Díaz-Sotomayor, Maricela

2011-01-01

The concept of fetal heart monitoring to determine the fetal wellbeing state has been employed for almost 300 years, but in the last 50 years it has observed drastic changes due to the incorporation of the electronic devices that has started controversy since the moment of its description and point of start. The purpose of this article is to mention the key points and controversial moments in the history of the cardiotocography

Starting Points and Destinations: Negotiating Factual and Fictional Pathways: A Response to Gilbourne, Jones and Jordan

ERIC Educational Resources Information Center

Wellard, Ian

2014-01-01

This paper provides a response to questions which emerged when reading Gilbourne et al's paper, questions it is suggested which compel us to go back to the very heart of what critical social science is (or can be) about. Central to this debate is the extent to which a perceived starting point in any investigation has implications upon the…

Breakout Reconnection Observed by the TESIS EUV Telescope

NASA Astrophysics Data System (ADS)

Reva, A. A.; Ulyanov, A. S.; Shestov, S. V.; Kuzin, S. V.

2016-01-01

We present experimental evidence of the coronal mass ejection (CME) breakout reconnection, observed by the TESIS EUV telescope. The telescope could observe solar corona up to 2 R⊙ from the Sun center in the Fe 171 Å line. Starting from 2009 April 8, TESIS observed an active region (AR) that had a quadrupolar structure with an X-point 0.5 R⊙ above photosphere. A magnetic field reconstructed from the Michelson Doppler Imager data also has a multipolar structure with an X-point above the AR. At 21:45 UT on April 9, the loops near the X-point started to move away from each other with a velocity of ≈7 km s-1. At 01:15 UT on April 10, a bright stripe appeared between the loops, and the flux in the GOES 0.5-4 Å channel increased. We interpret the loops’ sideways motion and the bright stripe as evidence of the breakout reconnection. At 01:45 UT, the loops below the X-point started to slowly move up. At 15:10 UT, the CME started to accelerate impulsively, while at the same time a flare arcade formed below the CME. After 15:50 UT, the CME moved with constant velocity. The CME evolution precisely followed the breakout model scenario.

Normalization and extension of single-collector efficiency correlation equation

NASA Astrophysics Data System (ADS)

Messina, Francesca; Marchisio, Daniele; Sethi, Rajandrea

2015-04-01

The colloidal transport and deposition are important phenomena involved in many engineering problems. In the environmental engineering field the use of micro- and nano-scale zerovalent iron (M-NZVI) is one of the most promising technologies for groundwater remediation. Colloid deposition is normally studied from a micro scale point of view and the results are then implemented in macro scale models that are used to design field-scale applications. The single collector efficiency concept predicts particles deposition onto a single grain of a complex porous medium in terms of probability that an approaching particle would be retained on the solid grain. In literature, many different approaches and equations exist to predict it, but most of them fail under specific conditions (e.g. very small or very big particle size and very low fluid velocity) because they predict efficiency values exceeding unity. By analysing particle fluxes and deposition mechanisms and performing a mass balance on the entire domain, the traditional definition of efficiency was reformulated and a novel total flux normalized correlation equation is proposed for predicting single-collector efficiency under a broad range of parameters. It has been formulated starting from a combination of Eulerian and Lagrangian numerical simulations, performed under Smoluchowski-Levich conditions, in a geometry which consists of a sphere enveloped by a control volume. In order to guarantee the independence of each term, the correlation equation is derived through a rigorous hierarchical parameter estimation process, accounting for single and mutual interacting transport mechanisms. The correlation equation provides efficiency values lower than one over a wide range of parameters and is valid both for point and finite-size particles. A reduced form is also proposed by elimination of the less relevant terms. References 1. Yao, K. M.; Habibian, M. M.; Omelia, C. R., Water and Waste Water Filtration - Concepts and Applications. Environ Sci Technol 1971, 5, (11), 1105-&. 2. Tufenkji, N., and M. Elimelech, Correlation equation for predicting single-collector efficiency in physicochemical filtration in saturated porous media. Environmental Science & Technology 2004 38(2):529-536. 3. Boccardo, G.; Marchisio, D. L.; Sethi, R., Microscale simulation of particle deposition in porous media. J Colloid Interface Sci 2014, 417, 227-37

PowerPoint Workshop for Teachers[TM].

ERIC Educational Resources Information Center

Caughlin, Janet

This guide for teachers to the Microsoft PowerPoint multimedia presentation program begins with a section that introduces what PowerPoint is and why teachers should use it, Windows 95/98 basics, Macintosh basics, getting started, PowerPoint toolbars, and presentation tips. The next section discusses learning PowerPoint, including creating a…

Multimedia learning for increasing knowledge on energy efficiency and promotion of proenvironmental behavior: A study of undergraduate students in Costa Rica

NASA Astrophysics Data System (ADS)

Walsh-Zuniga, Yoselyn

Promotion of energy efficiency practices among household has been employed in many interventions with a varying degree of success, mainly on developed countries. The purpose of the study is to promote and measure knowledge of proenvironmental behavior in undergraduate students in the Costa Rica Institute of Technology. The intervention used for this purpose provided personal and altruistic information about the impact of energy consumption activities in household. People's perceptions and attitudes about behaviors that contribute and mitigate climate change were also investigated. Participants were students from undergraduate programs who are also inhabitants of the residence hall provided by the institution. The participation consisted in two surveys and a learning module. Students responded a survey before and after exposure to a learning module. Surveys focused on identifying knowledge, attitudes and intentions. The learning module provided information about three hypothetical scenarios and corresponding energy consumption estimates for each one. Participants did not significantly improve their knowledge on energy efficiency topics and did not change perceptions about the topic of climate change. Yet for both, knowledge and perceptions, participants demonstrated an average knowledge on topics associated to climate change. In addition, participants did not use technical information to explain concepts and perceptions. Another important finding was that participants wrote their responses more third-person than in first person singular or plural, meaning that, excluding themselves from the solution and the problem. Results suggest that there is an average knowledge among participants about 2.5 out of 5 points that represent a start point to design more successful interventions that promote energy efficiency behaviors. A major recommendation to improve energy efficiency behaviors is to place a greater emphasis and awareness in personal consequences of the misuse of energy in household as part of future interventions. More studies based on real consumption data along with more engaging visualizations are highly encouraged.

Current Trends in Wireless Mesh Sensor Networks: A Review of Competing Approaches

PubMed Central

Rodenas-Herraiz, David; Garcia-Sanchez, Antonio-Javier; Garcia-Sanchez, Felipe; Garcia-Haro, Joan

2013-01-01

Finding a complete mesh-based solution for low-rate wireless personal area networks (LR-WPANs) is still an open issue. To cope with this concern, different competing approaches have emerged in the Wireless Mesh Sensor Networks (WMSNs) field in the last few years. They are usually supported by the IEEE 802.15.4 standard, the most commonly adopted LR-WPAN recommendation for point-to-point topologies. In this work, we review the most relevant and up-to-date WMSN solutions that extend the IEEE 802.15.4 standard to multi-hop mesh networks. To conduct this review, we start by identifying the most significant WMSN requirements (i.e., interoperability, robustness, scalability, mobility or energy-efficiency) that reveal the benefits and shortcomings of each proposal. Then, we re-examine thoroughly the group of proposals following different design guidelines which are usually considered by end-users and developers. Among all of the approaches reviewed, we highlight the IEEE 802.15.5 standard, a recent recommendation that, in its LR-WPAN version, fully satisfies the greatest number of WMSN requirements. As a result, IEEE 802.15.5 can be an appropriate solution for a wide-range of applications, unlike the majority of the remaining solutions reviewed, which are usually designed to solve particular problems, for instance in the home, building and industrial sectors. In this sense, a description of IEEE 802.15.5 is also included, paying special attention to its efficient energy-saving mechanisms. Finally, possible improvements of this recommendation are pointed out in order to offer hints for future research. PMID:23666128

Series-nonuniform rational B-spline signal feedback: From chaos to any embedded periodic orbit or target point.

PubMed

Shao, Chenxi; Xue, Yong; Fang, Fang; Bai, Fangzhou; Yin, Peifeng; Wang, Binghong

2015-07-01

The self-controlling feedback control method requires an external periodic oscillator with special design, which is technically challenging. This paper proposes a chaos control method based on time series non-uniform rational B-splines (SNURBS for short) signal feedback. It first builds the chaos phase diagram or chaotic attractor with the sampled chaotic time series and any target orbit can then be explicitly chosen according to the actual demand. Second, we use the discrete timing sequence selected from the specific target orbit to build the corresponding external SNURBS chaos periodic signal, whose difference from the system current output is used as the feedback control signal. Finally, by properly adjusting the feedback weight, we can quickly lead the system to an expected status. We demonstrate both the effectiveness and efficiency of our method by applying it to two classic chaotic systems, i.e., the Van der Pol oscillator and the Lorenz chaotic system. Further, our experimental results show that compared with delayed feedback control, our method takes less time to obtain the target point or periodic orbit (from the starting point) and that its parameters can be fine-tuned more easily.

Series-nonuniform rational B-spline signal feedback: From chaos to any embedded periodic orbit or target point

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Chenxi, E-mail: cxshao@ustc.edu.cn; Xue, Yong; Fang, Fang

2015-07-15

The self-controlling feedback control method requires an external periodic oscillator with special design, which is technically challenging. This paper proposes a chaos control method based on time series non-uniform rational B-splines (SNURBS for short) signal feedback. It first builds the chaos phase diagram or chaotic attractor with the sampled chaotic time series and any target orbit can then be explicitly chosen according to the actual demand. Second, we use the discrete timing sequence selected from the specific target orbit to build the corresponding external SNURBS chaos periodic signal, whose difference from the system current output is used as the feedbackmore » control signal. Finally, by properly adjusting the feedback weight, we can quickly lead the system to an expected status. We demonstrate both the effectiveness and efficiency of our method by applying it to two classic chaotic systems, i.e., the Van der Pol oscillator and the Lorenz chaotic system. Further, our experimental results show that compared with delayed feedback control, our method takes less time to obtain the target point or periodic orbit (from the starting point) and that its parameters can be fine-tuned more easily.« less

Creation of a Novel Class of Potent and Selective MutT Homologue 1 (MTH1) Inhibitors Using Fragment-Based Screening and Structure-Based Drug Design.

PubMed

Rahm, Fredrik; Viklund, Jenny; Trésaugues, Lionel; Ellermann, Manuel; Giese, Anja; Ericsson, Ulrika; Forsblom, Rickard; Ginman, Tobias; Günther, Judith; Hallberg, Kenth; Lindström, Johan; Persson, Lars Boukharta; Silvander, Camilla; Talagas, Antoine; Díaz-Sáez, Laura; Fedorov, Oleg; Huber, Kilian V M; Panagakou, Ioanna; Siejka, Paulina; Gorjánácz, Mátyás; Bauser, Marcus; Andersson, Martin

2018-03-22

Recent literature has both suggested and questioned MTH1 as a novel cancer target. BAY-707 was just published as a target validation small molecule probe for assessing the effects of pharmacological inhibition of MTH1 on tumor cell survival, both in vitro and in vivo. (1) In this report, we describe the medicinal chemistry program creating BAY-707, where fragment-based methods were used to develop a series of highly potent and selective MTH1 inhibitors. Using structure-based drug design and rational medicinal chemistry approaches, the potency was increased over 10,000 times from the fragment starting point while maintaining high ligand efficiency and drug-like properties.

Aligning Greek-English parallel texts

NASA Astrophysics Data System (ADS)

Galiotou, Eleni; Koronakis, George; Lazari, Vassiliki

2015-02-01

In this paper, we discuss issues concerning the alignment of parallel texts written in languages with different alphabets based on an experiment of aligning texts from the proceedings of the European Parliament in Greek and English. First, we describe our implementation of the k-vec algorithm and its application to the bilingual corpus. Then the output of the algorithm is used as a starting point for an alignment procedure at a sentence level which also takes into account mark-ups of meta-information. The results of the implementation are compared to those of the application of the Church and Gale alignment algorithm on the Europarl corpus. The conclusions of this comparison can give useful insights as for the efficiency of alignment algorithms when applied to the particular bilingual corpus.

A 15,000-hour cyclic endurance test of an 8-centimeter-diameter electron bombardment mercury ion thruster

NASA Technical Reports Server (NTRS)

Nakanishi, S.

1976-01-01

A laboratory model 8 cm thruster with improvements to minimize ion chamber erosion and peeling of sputtered metal was subjected to a cyclic endurance test for 15,040 hours and 460 restarts. A charted history of several thruster operating variables and off-normal events are shown in 600-hour segments at three points in the test. The transient behavior of these variables during a typical start-stop cycle is presented. Finding of the post-test inspection confirmed most of the expected results. Charge exchange ions caused normal accelerator grid erosion. The workability of the various design features was substantiated, and attainable improvements in propellant utilization efficiency should significantly reduce accelerator erosion.

Non-isolated 30 kW class arcjet PCU

NASA Astrophysics Data System (ADS)

Wong, See-Pok; Britt, Edward J.

1994-03-01

A 30 kW class arcjet Power Conditioning Unit, PCU, was built and tested during this Phase 2 SBIR contract. The PCU is an improved version of two previously developed PCU's. All of these units are 3-phase, 20 kHz buck regulators with current mode feed back to modulate the duty cycle to control the arcjet current at any selected operating point. The steady state control can assure arcjet stability despite the negative dynamic resistance of the arc discharge. The system also has a circuit to produce a high voltage start pulse to breakdown the gas and initiate the arc. The start pulse is formed by temporarily switching a short current path across the output terminals with a special solid state switching array. The switches then open rapidly, and the energy stored in the output inductors of the buck regulator produces a pulse of approximately 2500 V for approximately 500 nsec. The system was tested and modified until the transition to steady operation occurred after start up with a very small surge current overshoot. The system also can withstand a direct short circuit across the output without damage. The automatic feed back control simply reduces the duty cycle to hold the current at the set point. When the short is removed the full power output is immediately restored. This latest version arcjet PCU is conduction cooled to remove waste heat by conduction to the base plate. This unit is closer to flight a type of design than the previous functional bread boards. Waste heat is small because the PCU has a very high efficiency, 296 percent. The PCU was extensively tested with resistor loads to simulate operation with an arcjet. The unit was tested with ammonia arcjets at the Jet Propulsion Laboratory. Approximately 400 hours of testing were completed, with several starts. Many hours were also demonstrated with resistive loads.

Non-isolated 30 kW class arcjet PCU

NASA Technical Reports Server (NTRS)

Wong, See-Pok; Britt, Edward J.

1994-01-01

A 30 kW class arcjet Power Conditioning Unit, PCU, was built and tested during this Phase 2 SBIR contract. The PCU is an improved version of two previously developed PCU's. All of these units are 3-phase, 20 kHz buck regulators with current mode feed back to modulate the duty cycle to control the arcjet current at any selected operating point. The steady state control can assure arcjet stability despite the negative dynamic resistance of the arc discharge. The system also has a circuit to produce a high voltage start pulse to breakdown the gas and initiate the arc. The start pulse is formed by temporarily switching a short current path across the output terminals with a special solid state switching array. The switches then open rapidly, and the energy stored in the output inductors of the buck regulator produces a pulse of approximately 2500 V for approximately 500 nsec. The system was tested and modified until the transition to steady operation occurred after start up with a very small surge current overshoot. The system also can withstand a direct short circuit across the output without damage. The automatic feed back control simply reduces the duty cycle to hold the current at the set point. When the short is removed the full power output is immediately restored. This latest version arcjet PCU is conduction cooled to remove waste heat by conduction to the base plate. This unit is closer to flight a type of design than the previous functional bread boards. Waste heat is small because the PCU has a very high efficiency, 296 percent. The PCU was extensively tested with resistor loads to simulate operation with an arcjet. The unit was tested with ammonia arcjets at the Jet Propulsion Laboratory. Approximately 400 hours of testing were completed, with several starts. Many hours were also demonstrated with resistive loads. Some testing with hydrogen arcjets was also carried out at NASA LeRC. This system concept is now the design base for the ATTD program.

Multilevel relaxation phenomena and population trapping. Final report, July 1, 1984--June 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hioe, F.T.

1991-11-01

This final report summarizes the main results of our work supported by DOE since 1982. A list of 45 publications supported by this DOE Grant is attached at the end of this report. The use and exploitation of the SU(N) dynamic symmetry to the study of the dynamics of laser-atom interaction was the starting point of our research work under this DOE Grant, and is our most original contribution to the field of quantum electrodynamics. Many results of general and special interests have been derived and developed from this starting point and the following is a summary of them: (1)more » We have introduced a set of simple relations based on the principle of unitary invariance which has proved to be useful for the study of the dynamics of a quantum system involving coupling. (2) We have found various specific conditions under which (a) we may have trapped population, or (b) we may send laser pulses through a multilevel atomic medium without attenuation. (3) We have found a remarkably efficient method for optimal state selective multiphoton population transfer, that employs two or more spatially overlapping lasers arranged in an unconventional sequence which we called ``counterintuitive``. A recent suggestion by Profs. P. Marte, P. Zoller and J.L. Hall to use this counterintuitive method for atomic beam deflections promises to make this remarkably effective procedure to become an important method in atomic interferometry.« less

Oral desensitization to milk: how to choose the starting dose!

PubMed Central

Mori, Francesca; Pucci, Neri; Rossi, Maria Elisabetta; de Martino, Maurizio; Azzari, Chiara; Novembre, Elio

2010-01-01

Mori F, Pucci N, Rossi ME, de Martino M, Azzari C, Novembre E. Oral desensitization to milk: how to choose the starting dose! Pediatr Allergy Immunol 2010: 21: e450–e453. © 2009 John Wiley & Sons A/S A renewed interest in oral desensitization as treatment for food allergy has been observed in the last few years. We studied a novel method based on the end point skin prick test procedure to establish the starting dose for oral desensitization in a group of 30 children higly allergic to milk. The results (in terms of reactions to the first dose administered) were compared with a group of 20 children allergic to milk as well. Such control group started to swallow the same dose of 0.015 mg/ml of milk. None reacted to the first dose when administered according to the end point skin prick test. On the other side, ten out of 20 children (50%) from the control group showed mild allergic reactions to the first dose of milk. In conclusion the end point skin prick test procedure results safe and easy to be performed in each single child in order to find out the starting dose for oral desensitization to milk, also by taking into account the individual variability. PMID:19624618

Opportunities for Improved Management Efficiency of the Head Start Program: Performance Evaluation and High Risk Determination.

ERIC Educational Resources Information Center

Gall, Mary Sheila

This report provides results of a review of the methodology used by the Office of Human Development Services (HDS) to measure Head Start performance and to control high risk Head Start agencies. The review was performed at HDS headquarters and regional locations nationwide. The review was based on a sample of 200 Head Start agencies and focused on…

Antenna Controller Replacement Software

NASA Technical Reports Server (NTRS)

Chao, Roger Y.; Morgan, Scott C.; Strain, Martha M.; Rockwell, Stephen T.; Shimizu, Kenneth J.; Tehrani, Barzia J.; Kwok, Jaclyn H.; Tuazon-Wong, Michelle; Valtier, Henry; Nalbandi, Reza;

40 CFR 86.535-90 - Dynamometer procedure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... run consists of two tests, a “cold” start test and a “hot” start test following the “cold” start by 10... Administrator. (d) Practice runs over the prescribed driving schedule may be performed at test points, provided... the proper speed-time relationship, or to permit sampling system adjustments. (e) The drive wheel...

Mapping the transcription start points of the Staphylococcus aureus eap, emp, and vwb promoters reveals a conserved octanucleotide sequence that is essential for expression of these genes.

PubMed

Harraghy, Niamh; Homerova, Dagmar; Herrmann, Mathias; Kormanec, Jan

2008-01-01

Mapping the transcription start points of the eap, emp, and vwb promoters revealed a conserved octanucleotide sequence (COS). Deleting this sequence abolished the expression of eap, emp, and vwb. However, electrophoretic mobility shift assays gave no evidence that this sequence was a binding site for SarA or SaeR, known regulators of eap and emp.

Investigations of magnesium, histamine and immunoglobulins dynamics in acute urticaria.

PubMed

Mureşan, D; Oană, A; Nicolae, I; Alecu, M; Moşescu, L; Benea, V; Flueraş, M

1990-01-01

In 42 urticaria patients, magnesium, histamine and IgE were dosed. Magnesium, IgE and histamine variations were followed in urticaria evolution, during acute phase and clinical remission. We noticed magnesium, histamine, IgE values variations depending on disease evolution and applied therapeutic scheme. Therefore: At disease starting point, histamine presented 3.5 times higher values than the normal ones. The value decreases following a curve which tends to reach normal values during clinical remission. At disease starting point, magnesium presented values under the inferior limit of the normal, 0.5 m mol/L respectively, as a mean. The value increases towards the normal limit during clinical remission. Immunoglobulins E follow a similar curve to histamine one, presenting 1,250 U/L values at the starting point, that, under medication, influence decrease between normal limits (800 U/L), during clinical remission. Analyzing the variations of biochemical parameters, the authors emphasize magnesium substitution treatment in urticaria.

Mutagenesis of the three bases preceding the start codon of the beta-galactosidase mRNA and its effect on translation in Escherichia coli.

PubMed Central

Hui, A; Hayflick, J; Dinkelspiel, K; de Boer, H A

1984-01-01

The effect on the translation efficiency of various mutations in the three bases (the -1 triplet) that precede the AUG start codon of the beta-galactosidase mRNA in Escherichia coli was studied. Of the 39 mutants examined, the level of expression varies over a 20-fold range. The most favorable combinations of bases in the -1 triplet are UAU and CUU. The expression levels in the mutants with UUC, UCA or AGG as the -1 triplet are 20-fold lower than those with UAU or CUU. In general, a U residue immediately preceding the start codon is more favorable for expression than any other base; furthermore, an A residue at the -2 position enhances the translation efficiency in most instances. In both cases, however, the degree of enhancement depends on its context, i.e. the neighboring bases. Although the rules derived from this study are complex, the results show that mutations in any of the three bases preceding the start codon can strongly affect the translational efficiency of the beta-galactosidase mRNA. PMID:6425057

Effects of Cavity on the Performance of Dual Throat Nozzle During the Thrust-Vectoring Starting Transient Process.

PubMed

Gu, Rui; Xu, Jinglei

2014-01-01

The dual throat nozzle (DTN) technique is capable to achieve higher thrust-vectoring efficiencies than other fluidic techniques, without compromising thrust efficiency significantly during vectoring operation. The excellent performance of the DTN is mainly due to the concaved cavity. In this paper, two DTNs of different scales have been investigated by unsteady numerical simulations to compare the parameter variations and study the effects of cavity during the vector starting process. The results remind us that during the vector starting process, dynamic loads may be generated, which is a potentially challenging problem for the aircraft trim and control.

Computational design of variants for cephalosporin C acylase from Pseudomonas strain N176 with improved stability and activity.

PubMed

Tian, Ye; Huang, Xiaoqiang; Li, Qing; Zhu, Yushan

2017-01-01

In this report, redesigning cephalosporin C acylase from the Pseudomonas strain N176 revealed that the loss of stability owing to the introduced mutations at the active site can be recovered by repacking the nearby hydrophobic core regions. Starting from a quadruple mutant M31βF/H57βS/V68βA/H70βS, whose decrease in stability is largely owing to the mutation V68βA at the active site, we employed a computational enzyme design strategy that integrated design both at hydrophobic core regions for stability enhancement and at the active site for activity improvement. Single-point mutations L154βF, Y167βF, L180βF and their combinations L154βF/L180βF and L154βF/Y167βF/L180βF were found to display improved stability and activity. The two-point mutant L154βF/L180βF increased the protein melting temperature (T m ) by 11.7 °C and the catalytic efficiency V max /K m by 57 % compared with the values of the starting quadruple mutant. The catalytic efficiency of the resulting sixfold mutant M31βF/H57βS/V68βA/H70βS/L154βF/L180βF is recovered to become comparable to that of the triple mutant M31βF/H57βS/H70βS, but with a higher T m . Further experiments showed that single-point mutations L154βF, L180βF, and their combination contribute no stability enhancement to the triple mutant M31βF/H57βS/H70βS. These results verify that the lost stability because of mutation V68βA at the active site was recovered by introducing mutations L154βF and L180βF at hydrophobic core regions. Importantly, mutation V68βA in the six-residue mutant provides more space to accommodate the bulky side chain of cephalosporin C, which could help in designing cephalosporin C acylase mutants with higher activities and the practical one-step enzymatic route to prepare 7-aminocephalosporanic acid at industrial-scale levels.

AVERT Main Module Quick Start Guide

EPA Pesticide Factsheets

Learn how to get started with the AVERT tool, which guides non-experts in evaluating county-level emissions displaced at electric power plants by energy efficiency and renewable energy policies and programs.

MetILs 3: A Strategy for High Density Energy Storage Using Redox-Active Ionic Liquids

DOE PAGES

Small, Leo J.; Pratt, Harry D.; Staiger, Chad L.; ...

2017-07-26

We present a systematic approach for increasing the concentration of redox-active species in electrolytes for nonaqueous redox flow batteries (RFBs). Starting with an ionic liquid consisting of a metal coordination cation (MetIL), ferrocene-containing ligands and iodide anions are substituted incrementally into the structure. While chemical structures can be drawn for molecules with 10 m redox-active electrons (RAE), practical limitations such as melting point and phase stability constrain the structures to 4.2 m RAE, a 2.3× improvement over the original MetIL. Dubbed “MetILs 3,” these ionic liquids possess redox activity in the cation core, ligands, and anions. Throughout all compositions, infraredmore » spectroscopy shows the ethanolamine-based ligands primarily coordinate to the Fe 2+ core via hydroxyl groups. Calorimetry conveys a profound change in thermophysical properties, not only in melting temperature but also in suppression of a cold crystallization only observed in the original MetIL. Square wave voltammetry reveals redox processes characteristic of each molecular location. Testing a laboratory-scale RFB demonstrates Coulombic efficiencies >95% and increased voltage efficiencies due to more facile redox kinetics, effectively increasing capacity 4×. Application of this strategy to other chemistries, optimizing melting point and conductivity, can yield >10 m RAE, making nonaqueous RFB a viable technology for grid scale storage.« less

Process Improvement Initiative for the Perioperative Management of Patients With a Cardiovascular Implantable Electronic Device.

PubMed

Ellis, Margaret K Menzel; Treggiari, Miriam M; Robertson, Jamie M; Rozner, Marc A; Graven, Peter F; Aziz, Michael F; Merkel, Matthias J; Kahl, Edward A; Cohen, Norman A; Stecker, Eric C; Schulman, Peter M

2017-07-01

Economic, personnel, and procedural challenges often complicate and interfere with efficient and safe perioperative care of patients with cardiovascular implantable electronic devices (CIEDs). In the context of a process improvement initiative, we created and implemented a comprehensive anesthesiologist-run perioperative CIED service to respond to all routine requests for perioperative CIED consultations at a large academic medical center. This study was designed to determine whether this new care model was associated with improved operating room efficiency, reduced institutional cost, and adequate patient safety. We included patients with a CIED and a concurrent cohort of patients with the same eligibility criteria but without a CIED who underwent first-case-of-the-day surgery during the periods between February 1, 2008, and August 17, 2010 (preintervention) and between March 4, 2012, and August 1, 2014 (postintervention). The primary end point was delay in first-case-of-the day start time. We used multiple linear regression to compare delays in start times during the preintervention and postintervention periods and to adjust for potential confounders. A patient safety database was queried for CIED-related complications. Cost analysis was based on labor minutes saved and was calculated using nationally published administrative estimates. A total of 18,148 first-case surgical procedures were performed in 15,100 patients (preintervention period-7293 patients and postintervention period-7807 patients). Of those, 151 (2.1%) patients had a CIED in the preintervention period, and 146 (1.9%) had a CIED in the postintervention period. After adjustment for imbalances in baseline characteristics (age, American Society of Anesthesiologists physical status, and surgical specialty), the difference in mean first-case start delay between the postintervention and preintervention periods in the cohort of patients with a CIED was -16.7 minutes (95% confidence interval [CI], -26.1 to -7.2). The difference in mean delay between the postintervention and preintervention periods in the cohort without a CIED was -4.7 minutes (95% CI, -5.4 to -3.9). There were 3 CIED-related adverse events during the preintervention period and none during the postintervention period. Based on reduction in first-case start delay, the intervention was associated with cost savings (estimated institutional savings $14,102 annually, or $94.06 per CIED patient), with a return on investment ratio of 2.18 over the course of the postintervention period. Based on our experience, specially trained anesthesiologists can provide efficient and safe perioperative care for patients with CIEDs. Other centers may consider implementing a similar strategy as our specialty adopts the perioperative surgical home model.

Improving first case start times using Lean in an academic medical center.

PubMed

Deldar, Romina; Soleimani, Tahereh; Harmon, Carol; Stevens, Larry H; Sood, Rajiv; Tholpady, Sunil S; Chu, Michael W

2017-06-01

Lean is a process improvement strategy that can improve efficiency of the perioperative process. The purpose of this study was to identify etiologies of late surgery start times, implement Lean interventions, and analyze their effects. A retrospective review of all first-start surgery cases was performed. Lean was implemented in May 2015, and cases 7 months before and after implementation were analyzed. A total of 4,492 first-start cases were included; 2,181 were pre-Lean and 2,311 were post-Lean. The post-Lean group had significantly higher on-time starts than the pre-Lean group (69.0% vs 57.0%, P < .01). The most common delay etiology was surgeon-related for both groups. Delayed post-Lean cases were significantly less likely to be due to preoperative assessment (14.9% vs 9.9%, P < .01) and more likely due to patient-related (16.5% vs 22.3%, P < .01) or chaplain (1.8% vs 4.0%, P < .01) factors. Delayed starts occurred more often on snowy and cold days, and less often on didactic days (P < .01). Modifying preoperative tasks using Lean methods can improve operating room efficiency and increase on-time starts. Copyright © 2016 Elsevier Inc. All rights reserved.

The Military Assistance Command-Vietnam Studies and Observations Group-A Case Study in Special Operations Campaigning

DTIC Science & Technology

2016-06-10

viewed as the panacea for all military problems. Politicians view SOF as a low risk minimalist investment that produces results; even for problems...of published work that has been dedicated to discussing special operations theory as an element of military strategy. A good starting point to...utility. Doctrine As a starting point for framing understanding of special operations, Joint Publication (JP) 3-05 Special Operations, provides the basis

Investigation of the influence of sampling schemes on quantitative dynamic fluorescence imaging

PubMed Central

Dai, Yunpeng; Chen, Xueli; Yin, Jipeng; Wang, Guodong; Wang, Bo; Zhan, Yonghua; Nie, Yongzhan; Wu, Kaichun; Liang, Jimin

2018-01-01

Dynamic optical data from a series of sampling intervals can be used for quantitative analysis to obtain meaningful kinetic parameters of probe in vivo. The sampling schemes may affect the quantification results of dynamic fluorescence imaging. Here, we investigate the influence of different sampling schemes on the quantification of binding potential (BP) with theoretically simulated and experimentally measured data. Three groups of sampling schemes are investigated including the sampling starting point, sampling sparsity, and sampling uniformity. In the investigation of the influence of the sampling starting point, we further summarize two cases by considering the missing timing sequence between the probe injection and sampling starting time. Results show that the mean value of BP exhibits an obvious growth trend with an increase in the delay of the sampling starting point, and has a strong correlation with the sampling sparsity. The growth trend is much more obvious if throwing the missing timing sequence. The standard deviation of BP is inversely related to the sampling sparsity, and independent of the sampling uniformity and the delay of sampling starting time. Moreover, the mean value of BP obtained by uniform sampling is significantly higher than that by using the non-uniform sampling. Our results collectively suggest that a suitable sampling scheme can help compartmental modeling of dynamic fluorescence imaging provide more accurate results and simpler operations. PMID:29675325

Drafting guidelines for occupational exposure to chemicals: the Dutch experience with the assessment of reproductive risks.

PubMed

Stijkel, A; van Eijndhoven, J C; Bal, R

1996-12-01

The Dutch procedure for standard setting for occupational exposure to chemicals, just like the European Union (EU) procedure, is characterized by an organizational separation between considerations of health on the one side, and of technology, economics, and policy on the other side. Health considerations form the basis for numerical guidelines. These guidelines are next combined with technical-economical considerations. Standards are then proposed, and are finally set by the Ministry of Social Affairs and Employment. An analysis of this procedure might be of relevance to the US, where other procedures are used and criticized. In this article we focus on the first stage of the standard-setting procedure. In this stage, the Dutch Expert Committee on Occupational Standards (DECOS) drafts a criteria document in which a health-based guideline is proposed. The drafting is based on a set of starting points for assessing toxicity. We raise the questions, "Does DECOS limit itself only to health considerations? And if not, what are the consequences of such a situation?" We discuss DECOS' starting points and analyze the relationships between those starting points, and then explore eight criteria documents where DECOS was considering reproductive risks as a possible critical effect. For various reasons, it will be concluded that the starting points leave much interpretative space, and that this space is widened further by the manner in which DECOS utilizes it. This is especially true in situations involving sex-specific risks and uncertainties in knowledge. Consequently, even at the first stage, where health considerations alone are intended to play a role, there is much room for other than health-related factors to influence decision making, although it is unavoidable that some interpretative space will remain. We argue that separating the various types of consideration should not be abandoned. Rather, through adjustments in the starting points and aspects of the procedure, clarity should be guaranteed about the way the interpretative space is being employed.

Lean principles optimize on-time vascular surgery operating room starts and decrease resident work hours.

PubMed

Warner, Courtney J; Walsh, Daniel B; Horvath, Alexander J; Walsh, Teri R; Herrick, Daniel P; Prentiss, Steven J; Powell, Richard J

2013-11-01

Lean process improvement techniques are used in industry to improve efficiency and quality while controlling costs. These techniques are less commonly applied in health care. This study assessed the effectiveness of Lean principles on first case on-time operating room starts and quantified effects on resident work hours. Standard process improvement techniques (DMAIC methodology: define, measure, analyze, improve, control) were used to identify causes of delayed vascular surgery first case starts. Value stream maps and process flow diagrams were created. Process data were analyzed with Pareto and control charts. High-yield changes were identified and simulated in computer and live settings prior to implementation. The primary outcome measure was the proportion of on-time first case starts; secondary outcomes included hospital costs, resident rounding time, and work hours. Data were compared with existing benchmarks. Prior to implementation, 39% of first cases started on time. Process mapping identified late resident arrival in preoperative holding as a cause of delayed first case starts. Resident rounding process inefficiencies were identified and changed through the use of checklists, standardization, and elimination of nonvalue-added activity. Following implementation of process improvements, first case on-time starts improved to 71% at 6 weeks (P = .002). Improvement was sustained with an 86% on-time rate at 1 year (P < .001). Resident rounding time was reduced by 33% (from 70 to 47 minutes). At 9 weeks following implementation, these changes generated an opportunity cost potential of $12,582. Use of Lean principles allowed rapid identification and implementation of perioperative process changes that improved efficiency and resulted in significant cost savings. This improvement was sustained at 1 year. Downstream effects included improved resident efficiency with decreased work hours. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Advanced Cooling for High Power Electric Actuators

DTIC Science & Technology

1993-01-01

heat and heat transfer rates. At point B, the fluid temperature reaches the melting temperature of the PCM and it starts to melt , storing energy in the...working fluid through the duty cycle represented by the square wave in the upper half of the figure. Starting at point A, the actuator goes to peak load...form of latent heat. As the solid material melts , the coolant temperature continues to rise, but at a much lower rate, as the heat conducts through the

The role of the optimization process in illumination design

NASA Astrophysics Data System (ADS)

Gauvin, Michael A.; Jacobsen, David; Byrne, David J.

2015-07-01

This paper examines the role of the optimization process in illumination design. We will discuss why the starting point of the optimization process is crucial to a better design and why it is also important that the user understands the basic design problem and implements the correct merit function. Both a brute force method and the Downhill Simplex method will be used to demonstrate optimization methods with focus on using interactive design tools to create better starting points to streamline the optimization process.

Application of genetic algorithm for the simultaneous identification of atmospheric pollution sources

NASA Astrophysics Data System (ADS)

Cantelli, A.; D'Orta, F.; Cattini, A.; Sebastianelli, F.; Cedola, L.

2015-08-01

A computational model is developed for retrieving the positions and the emission rates of unknown pollution sources, under steady state conditions, starting from the measurements of the concentration of the pollutants. The approach is based on the minimization of a fitness function employing a genetic algorithm paradigm. The model is tested considering both pollutant concentrations generated through a Gaussian model in 25 points in a 3-D test case domain (1000m × 1000m × 50 m) and experimental data such as the Prairie Grass field experiments data in which about 600 receptors were located along five concentric semicircle arcs and the Fusion Field Trials 2007. The results show that the computational model is capable to efficiently retrieve up to three different unknown sources.

Achrotech: achromat cost versus performance for conventional, diffractive, and GRIN components

NASA Astrophysics Data System (ADS)

Morris, Jeffrey; Wolf, Greg; Vandendriessche, Stefaan; Sparrold, Scott

2016-09-01

An achromatic component shares a common focus at two wavelengths and is a commonly used device in optical assemblies. This work explores the cost versus performance tradeoff for several types of achromatic lenses: conventional doublets with homogenous glass elements, hybrid doublets with a diffractive surface, axial GRadient INdex (GRIN) lenses (where the index of refraction changes along the length of the lens), and radial GRIN lenses (where the index of refraction changes depending on radial position). First order achromatic principles will be reviewed and applied to each system as a starting point and refined through the use of ray trace software. Optical performance will be assessed in terms of focusing efficiency and imaging. Cost will then be evaluated by accounting for current manufacturing costs and retail price through several distributors.

Data-Driven Learning of Total and Local Energies in Elemental Boron

NASA Astrophysics Data System (ADS)

Deringer, Volker L.; Pickard, Chris J.; Csányi, Gábor

2018-04-01

The allotropes of boron continue to challenge structural elucidation and solid-state theory. Here we use machine learning combined with random structure searching (RSS) algorithms to systematically construct an interatomic potential for boron. Starting from ensembles of randomized atomic configurations, we use alternating single-point quantum-mechanical energy and force computations, Gaussian approximation potential (GAP) fitting, and GAP-driven RSS to iteratively generate a representation of the element's potential-energy surface. Beyond the total energies of the very different boron allotropes, our model readily provides atom-resolved, local energies and thus deepened insight into the frustrated β -rhombohedral boron structure. Our results open the door for the efficient and automated generation of GAPs, and other machine-learning-based interatomic potentials, and suggest their usefulness as a tool for materials discovery.

Data-Driven Learning of Total and Local Energies in Elemental Boron.

PubMed

Deringer, Volker L; Pickard, Chris J; Csányi, Gábor

2018-04-13

The allotropes of boron continue to challenge structural elucidation and solid-state theory. Here we use machine learning combined with random structure searching (RSS) algorithms to systematically construct an interatomic potential for boron. Starting from ensembles of randomized atomic configurations, we use alternating single-point quantum-mechanical energy and force computations, Gaussian approximation potential (GAP) fitting, and GAP-driven RSS to iteratively generate a representation of the element's potential-energy surface. Beyond the total energies of the very different boron allotropes, our model readily provides atom-resolved, local energies and thus deepened insight into the frustrated β-rhombohedral boron structure. Our results open the door for the efficient and automated generation of GAPs, and other machine-learning-based interatomic potentials, and suggest their usefulness as a tool for materials discovery.

Benzothiazepine CGP37157 and its 2'-isopropyl analogue modulate Ca²⁺ entry through CALHM1.

PubMed

Moreno-Ortega, Ana J; Martínez-Sanz, Francisco J; Lajarín-Cuesta, Rocío; de Los Rios, Cristóbal; Cano-Abad, María F

2015-08-01

CALHM1 is a Ca(2+) channel discovered in 2008, which plays a key role in the neuronal electrical activity, among other functions. However, there are no known efficient blockers able to modulate its Ca(2+) handling ability. We herein describe that benzothiazepine CGP37157 and its newly synthesized analogue ITH12575 reduced Ca(2+) influx through CALHM1 at low micromolar concentrations. These results could serve as a starting point for the development of more selective CALHM1 ligands using CGP37157 as a hit compound, which would help to study the physiological role of CALHM1 in the control of [Ca(2+)]cyt in excitable cells, as well as its implication in CNS diseases. Copyright © 2015 Elsevier Ltd. All rights reserved.

Polarization-controlled coherent phonon generation in acoustoplasmonic metasurfaces

NASA Astrophysics Data System (ADS)

Lanzillotti-Kimura, Norberto D.; O'Brien, Kevin P.; Rho, Junsuk; Suchowski, Haim; Yin, Xiaobo; Zhang, Xiang

2018-06-01

Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons, and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopies and phonon lasers. Here we show how an optimized plasmonic metasurface can act as a high-frequency phonon transducer. We report pump-probe experiments in metasurfaces composed of an array of gold nanostructures, revealing that such arrays can act as efficient and tunable photon-phonon transducers, with a strong spectral dependence on the excitation rate and laser polarization. We anticipate our work to be the starting point for the engineering of phononic metasurfaces based on plasmonic nanostructures.

SUMCOR: Cascade summing correction for volumetric sources applying MCNP6.

PubMed

Dias, M S; Semmler, R; Moreira, D S; de Menezes, M O; Barros, L F; Ribeiro, R V; Koskinas, M F

2018-04-01

The main features of code SUMCOR developed for cascade summing correction for volumetric sources are described. MCNP6 is used to track histories starting from individual points inside the volumetric source, for each set of cascade transitions from the radionuclide. Total and FEP efficiencies are calculated for all gamma-rays and X-rays involved in the cascade. Cascade summing correction is based on the matrix formalism developed by Semkow et al. (1990). Results are presented applying the experimental data sent to the participants of two intercomparisons organized by the ICRM-GSWG and coordinated by Dr. Marie-Cristine Lépy from the Laboratoire National Henri Becquerel (LNE-LNHB), CEA, in 2008 and 2010, respectively and compared to the other participants in the intercomparisons. Copyright © 2017 Elsevier Ltd. All rights reserved.

Contribution of stimulus attributes to errors in duration and distance judgments--a developmental study.

PubMed

Matsuda, F; Lan, W C; Tanimura, R

1999-02-01

In Matsuda's 1996 study, 4- to 11-yr.-old children (N = 133) watched two cars running on two parallel tracks on a CRT display and judged whether their durations and distances were equal and, if not, which was larger. In the present paper, the relative contributions of the four critical stimulus attributes (whether temporal starting points, temporal stopping points, spatial starting points, and spatial stopping points were the same or different between two cars) to the production of errors were quantitatively estimated based on the data for rates of errors obtained by Matsuda. The present analyses made it possible not only to understand numerically the findings about qualitative characteristics of the critical attributes described by Matsuda, but also to add more detailed findings about them.

Malaria and global change: Insights, uncertainties and possible surprises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, P.H.; Steel, A.

Malaria may change with global change. Indeed, global change may affect malaria risk and malaria epidemiology. Malaria risk may change in response to a greenhouse warming; malaria epidemiology, in response to the social, economic, and political developments which a greenhouse warming may trigger. To date, malaria receptivity and epidemiology futures have been explored within the context of equilibrium studies. Equilibrium studies of climate change postulate an equilibrium present climate (the starting point) and a doubled-carbon dioxide climate (the end point), simulate conditions in both instances, and compare the two. What happens while climate changes, i.e., between the starting point andmore » the end point, is ignored. The present paper focuses on malaria receptivity and addresses what equilibrium studies miss, namely transient malaria dynamics.« less

Creating a market: an economic analysis of the purchaser-provider model.

PubMed

Shackley, P; Healey, A

1993-09-01

The focus of this paper is the extent to which the purchaser-provider split and the creation of a market in the provision of health care can be expected to bring about greater efficiency within the new NHS. The starting point is a theoretical discussion of markets and competition. In particular, emphasis is placed upon the economic model of perfect competition. It is argued that because of the existence of externalities, uncertainty and a lack of perfect information, an unregulated market in health care will almost certainly fail. In view of this, the imperfect provider markets of monopoly and contestable markets, which are of particular relevance to health care, are discussed. A description of the new health care market and the principal actors within it is followed by an evaluation of the new health care market. It is argued that in view of the restrictions to competition that exist between providers, some form of price regulation will be necessary to prevent monopolistic behaviour in the hospital sector. Regulation of purchasers is also suggested as a means of improving efficiency. It is concluded that competition may be a necessary condition for increased efficiency in health care provision, but is not sufficient in itself. Other incentives in the hospital sector are necessary to assist the market process and to enhance its impact on efficiency.

High-efficiency broadband excitation and propagation of second-mode spoof surface plasmon polaritons by a complementary structure.

PubMed

Zhang, Dawei; Zhang, Kuang; Wu, Qun; Yang, Guohui; Sha, Xuejun

2017-07-15

A complementary structure based on coplanar waveguides (CPWs) with periodical etching slots is proposed to support spoof surface plasmon polaritons (SSPPs). In contrast to the traditional slotline-based complementary SSPP structure, a dispersion curve of the second mode by the proposed structure has a much lower starting point from the origin which exhibits greatly improved operating bandwidth. Moreover, tighter confinements of SSPPs in the region of small wave vectors corresponding to lower frequencies can be predicted from the dispersion analysis, which means enhancement of transmission efficiency. Then a simple and efficient transition structure with tapered CPWs and gradient slots is proposed to realize high-efficiency and broadband excitation of the second mode of SSPPs for the first time, to the best of our knowledge. Based on the proposed structure, a seamless connection between CPWs and the SSPP structure can be achieved. The measured insertion loss and return loss below 6.6 GHz is better than -0.86 and -13.62  dB, respectively. Furthermore, it can be seen from the measurement results that a 3 dB bandwidth ranges from 0 to 10.57 GHz, and the return loss is better than -10  dB from 0 to 8.96 GHz. The proposed structure can promote the development of plasmonic integrate circuits and functional devices at microwave frequencies.

Efficient ECH-assisted plasma start-up using trapped particle configuration in the versatile experiment spherical torus

NASA Astrophysics Data System (ADS)

An, YoungHwa; Lee, Jeongwon; Jo, JongGab; Jung, Bong-Ki; Lee, HyunYeong; Chung, Kyoung-Jae; Na, Yong-Su; Hahm, T. S.; Hwang, Y. S.

2017-01-01

An efficient and robust ECH (electron cyclotron heating)-assisted plasma start-up scheme with a low loop voltage and low volt-second consumption utilizing the trapped particle configuration (TPC) has been developed in the versatile experiment spherical torus (VEST). The TPC is a mirror-like magnetic field configuration providing a vertical magnetic field in the same direction as the equilibrium field. It significantly enhances ECH pre-ionization with enhanced particle confinement due to its mirror effect, and intrinsically provides an equilibrium field with a stable decay index enabling prompt plasma current initiation. Consequently, the formation of TPC before the onset of the loop voltage allows the plasma to start up with a lower loop voltage and lower volt-second consumption as well as a wider operation range in terms of ECH pre-ionization power and H2 filling pressure. The TPC can improve the widely-used field null configuration significantly for more efficient start-up when ECH pre-ionization is used. This can then be utilized in superconducting tokamaks requiring a low loop voltage start-up, such as ITER, or in spherical tori with limited volt-seconds. The TPC can be particularly useful in superconducting tokamaks with a limited current slew-rate of superconducting PF coils, as it can save volt-second consumption before plasma current initiation by providing prompt initiation with an intrinsic stable equilibrium field.

A Fast-Starting Robotic Fish

NASA Astrophysics Data System (ADS)

Modarres-Sadeghi, Yahya; Watts, Matthew; Conte, Joe; Hover, Franz; Triantafyllou, Michael

2009-11-01

We have built a simple mechanical system to emulate the fast-start performance of fish. The system consisted of a thin metal beam covered by a urethane rubber fish body. The body form of the mechanical fish in this work was modeled from a pike species, which is the most successfully studied fast-start specialist species. The mechanical fish was held in curvature and hung in water by two restraining lines, which were simultaneously released by pneumatic cutting mechanisms. The potential energy in the beam was transferred into the fluid, thereby accelerating the fish, similar to a pike. We measured the resulting velocity and acceleration, as well as the efficiency of propulsion for the mechanical fish model and also ran a series of flow visualization tests to observe the resulting flow pattern. We also studied the influence of stiffness and geometry of the tail on the efficiency of propulsion and flow pattern. The hydrodynamic efficiency of the fish, calculated by the transfer of energy, was around 10%. Flow visualization of the mechanical fast-start wake was also analyzed, showing that the acceleration is associated with the fast movement of an intense vortex in a near-lateral direction.

From W7-X to a HELIAS fusion power plant: motivation and options for an intermediate-step burning-plasma stellarator

NASA Astrophysics Data System (ADS)

Warmer, F.; Beidler, C. D.; Dinklage, A.; Wolf, R.; The W7-X Team

2016-07-01

As a starting point for a more in-depth discussion of a research strategy leading from Wendelstein 7-X to a HELIAS power plant, the respective steps in physics and engineering are considered from different vantage points. The first approach discusses the direct extrapolation of selected physics and engineering parameters. This is followed by an examination of advancing the understanding of stellarator optimisation. Finally, combining a dimensionless parameter approach with an empirical energy confinement time scaling, the necessary development steps are highlighted. From this analysis it is concluded that an intermediate-step burning-plasma stellarator is the most prudent approach to bridge the gap between W7-X and a HELIAS power plant. Using a systems code approach in combination with transport simulations, a range of possible conceptual designs is analysed. This range is exemplified by two bounding cases, a fast-track, cost-efficient device with low magnetic field and without a blanket and a device similar to a demonstration power plant with blanket and net electricity power production.

Seamline Determination Based on PKGC Segmentation for Remote Sensing Image Mosaicking

PubMed Central

Dong, Qiang; Liu, Jinghong

2017-01-01

This paper presents a novel method of seamline determination for remote sensing image mosaicking. A two-level optimization strategy is applied to determine the seamline. Object-level optimization is executed firstly. Background regions (BRs) and obvious regions (ORs) are extracted based on the results of parametric kernel graph cuts (PKGC) segmentation. The global cost map which consists of color difference, a multi-scale morphological gradient (MSMG) constraint, and texture difference is weighted by BRs. Finally, the seamline is determined in the weighted cost from the start point to the end point. Dijkstra’s shortest path algorithm is adopted for pixel-level optimization to determine the positions of seamline. Meanwhile, a new seamline optimization strategy is proposed for image mosaicking with multi-image overlapping regions. The experimental results show the better performance than the conventional method based on mean-shift segmentation. Seamlines based on the proposed method bypass the obvious objects and take less time in execution. This new method is efficient and superior for seamline determination in remote sensing image mosaicking. PMID:28749446

Vibrational self-consistent field theory using optimized curvilinear coordinates.

PubMed

Bulik, Ireneusz W; Frisch, Michael J; Vaccaro, Patrick H

2017-07-28

A vibrational SCF model is presented in which the functions forming the single-mode functions in the product wavefunction are expressed in terms of internal coordinates and the coordinates used for each mode are optimized variationally. This model involves no approximations to the kinetic energy operator and does not require a Taylor-series expansion of the potential. The non-linear optimization of coordinates is found to give much better product wavefunctions than the limited variations considered in most previous applications of SCF methods to vibrational problems. The approach is tested using published potential energy surfaces for water, ammonia, and formaldehyde. Variational flexibility allowed in the current ansätze results in excellent zero-point energies expressed through single-product states and accurate fundamental transition frequencies realized by short configuration-interaction expansions. Fully variational optimization of single-product states for excited vibrational levels also is discussed. The highlighted methodology constitutes an excellent starting point for more sophisticated treatments, as the bulk characteristics of many-mode coupling are accounted for efficiently in terms of compact wavefunctions (as evident from the accurate prediction of transition frequencies).

Effect of starting point formation on the crystallization of amorphous silicon films by flash lamp annealing

NASA Astrophysics Data System (ADS)

Sato, Daiki; Ohdaira, Keisuke

2018-04-01

We succeed in the crystallization of hydrogenated amorphous silicon (a-Si:H) films by flash lamp annealing (FLA) at a low fluence by intentionally creating starting points for the trigger of explosive crystallization (EC). We confirm that a partly thick a-Si part can induce the crystallization of a-Si films. A periodic wavy structure is observed on the surface of polycrystalline silicon (poly-Si) on and near the thick parts, which is a clear indication of the emergence of EC. Creating partly thick a-Si parts can thus be effective for the control of the starting point of crystallization by FLA and can realize the crystallization of a-Si with high reproducibility. We also compare the effects of creating thick parts at the center and along the edge of the substrates, and a thick part along the edge of the substrates leads to the initiation of crystallization at a lower fluence.

Nearby Search Indekos Based Android Using A Star (A*) Algorithm

NASA Astrophysics Data System (ADS)

Siregar, B.; Nababan, EB; Rumahorbo, JA; Andayani, U.; Fahmi, F.

2018-03-01

Indekos or rented room is a temporary residence for months or years. Society of academicians who come from out of town need a temporary residence, such as Indekos or rented room during their education, teaching, or duties. They are often found difficulty in finding a Indekos because lack of information about the Indekos. Besides, new society of academicians don’t recognize the areas around the campus and desire the shortest path from Indekos to get to the campus. The problem can be solved by implementing A Star (A*) algorithm. This algorithm is one of the shortest path algorithm to a finding shortest path from campus to the Indekos application, where the faculties in the campus as the starting point of the finding. Determination of the starting point used in this study aims to allow students to determine the starting point in finding the Indekos. The mobile based application facilitates the finding anytime and anywhere. Based on the experimental results, A* algorithm can find the shortest path with 86,67% accuracy.

Recursive Branching Simulated Annealing Algorithm

NASA Technical Reports Server (NTRS)

Bolcar, Matthew; Smith, J. Scott; Aronstein, David

2012-01-01

This innovation is a variation of a simulated-annealing optimization algorithm that uses a recursive-branching structure to parallelize the search of a parameter space for the globally optimal solution to an objective. The algorithm has been demonstrated to be more effective at searching a parameter space than traditional simulated-annealing methods for a particular problem of interest, and it can readily be applied to a wide variety of optimization problems, including those with a parameter space having both discrete-value parameters (combinatorial) and continuous-variable parameters. It can take the place of a conventional simulated- annealing, Monte-Carlo, or random- walk algorithm. In a conventional simulated-annealing (SA) algorithm, a starting configuration is randomly selected within the parameter space. The algorithm randomly selects another configuration from the parameter space and evaluates the objective function for that configuration. If the objective function value is better than the previous value, the new configuration is adopted as the new point of interest in the parameter space. If the objective function value is worse than the previous value, the new configuration may be adopted, with a probability determined by a temperature parameter, used in analogy to annealing in metals. As the optimization continues, the region of the parameter space from which new configurations can be selected shrinks, and in conjunction with lowering the annealing temperature (and thus lowering the probability for adopting configurations in parameter space with worse objective functions), the algorithm can converge on the globally optimal configuration. The Recursive Branching Simulated Annealing (RBSA) algorithm shares some features with the SA algorithm, notably including the basic principles that a starting configuration is randomly selected from within the parameter space, the algorithm tests other configurations with the goal of finding the globally optimal solution, and the region from which new configurations can be selected shrinks as the search continues. The key difference between these algorithms is that in the SA algorithm, a single path, or trajectory, is taken in parameter space, from the starting point to the globally optimal solution, while in the RBSA algorithm, many trajectories are taken; by exploring multiple regions of the parameter space simultaneously, the algorithm has been shown to converge on the globally optimal solution about an order of magnitude faster than when using conventional algorithms. Novel features of the RBSA algorithm include: 1. More efficient searching of the parameter space due to the branching structure, in which multiple random configurations are generated and multiple promising regions of the parameter space are explored; 2. The implementation of a trust region for each parameter in the parameter space, which provides a natural way of enforcing upper- and lower-bound constraints on the parameters; and 3. The optional use of a constrained gradient- search optimization, performed on the continuous variables around each branch s configuration in parameter space to improve search efficiency by allowing for fast fine-tuning of the continuous variables within the trust region at that configuration point.

Methods for finding transition states on reduced potential energy surfaces

NASA Astrophysics Data System (ADS)

Burger, Steven K.; Ayers, Paul W.

2010-06-01

Three new algorithms are presented for determining transition state (TS) structures on the reduced potential energy surface, that is, for problems in which a few important degrees of freedom can be isolated. All three methods use constrained optimization to rapidly find the TS without an initial Hessian evaluation. The algorithms highlight how efficiently the TS can be located on a reduced surface, where the rest of the degrees of freedom are minimized. The first method uses a nonpositive definite quasi-Newton update for the reduced degrees of freedom. The second uses Shepard interpolation to fit the Hessian and starts from a set of points that bound the TS. The third directly uses a finite difference scheme to calculate the reduced degrees of freedom of the Hessian of the entire system, and searches for the TS on the full potential energy surface. All three methods are tested on an epoxide hydrolase cluster, and the ring formations of cyclohexane and cyclobutenone. The results indicate that all the methods are able to converge quite rapidly to the correct TS, but that the finite difference approach is the most efficient.

Methods for finding transition states on reduced potential energy surfaces.

PubMed

Burger, Steven K; Ayers, Paul W

2010-06-21

Three new algorithms are presented for determining transition state (TS) structures on the reduced potential energy surface, that is, for problems in which a few important degrees of freedom can be isolated. All three methods use constrained optimization to rapidly find the TS without an initial Hessian evaluation. The algorithms highlight how efficiently the TS can be located on a reduced surface, where the rest of the degrees of freedom are minimized. The first method uses a nonpositive definite quasi-Newton update for the reduced degrees of freedom. The second uses Shepard interpolation to fit the Hessian and starts from a set of points that bound the TS. The third directly uses a finite difference scheme to calculate the reduced degrees of freedom of the Hessian of the entire system, and searches for the TS on the full potential energy surface. All three methods are tested on an epoxide hydrolase cluster, and the ring formations of cyclohexane and cyclobutenone. The results indicate that all the methods are able to converge quite rapidly to the correct TS, but that the finite difference approach is the most efficient.

Method for hyperspectral imagery exploitation and pixel spectral unmixing

NASA Technical Reports Server (NTRS)

Lin, Ching-Fang (Inventor)

2003-01-01

An efficiently hybrid approach to exploit hyperspectral imagery and unmix spectral pixels. This hybrid approach uses a genetic algorithm to solve the abundance vector for the first pixel of a hyperspectral image cube. This abundance vector is used as initial state in a robust filter to derive the abundance estimate for the next pixel. By using Kalman filter, the abundance estimate for a pixel can be obtained in one iteration procedure which is much fast than genetic algorithm. The output of the robust filter is fed to genetic algorithm again to derive accurate abundance estimate for the current pixel. The using of robust filter solution as starting point of the genetic algorithm speeds up the evolution of the genetic algorithm. After obtaining the accurate abundance estimate, the procedure goes to next pixel, and uses the output of genetic algorithm as the previous state estimate to derive abundance estimate for this pixel using robust filter. And again use the genetic algorithm to derive accurate abundance estimate efficiently based on the robust filter solution. This iteration continues until pixels in a hyperspectral image cube end.

Genome-wide chromatin footprinting reveals changes in replication origin architecture induced by pre-RC assembly

PubMed Central

MacAlpine, Heather K.; Lubelsky, Yoav; Hartemink, Alexander J.

2015-01-01

Start sites of DNA replication are marked by the origin recognition complex (ORC), which coordinates Mcm2–7 helicase loading to form the prereplicative complex (pre-RC). Although pre-RC assembly is well characterized in vitro, the process is poorly understood within the local chromatin environment surrounding replication origins. To reveal how the chromatin architecture modulates origin selection and activation, we “footprinted” nucleosomes, transcription factors, and replication proteins at multiple points during the Saccharomyces cerevisiae cell cycle. Our nucleotide-resolution protein occupancy profiles resolved a precise ORC-dependent footprint at 269 origins in G2. A separate class of inefficient origins exhibited protein occupancy only in G1, suggesting that stable ORC chromatin association in G2 is a determinant of origin efficiency. G1 nucleosome remodeling concomitant with pre-RC assembly expanded the origin nucleosome-free region and enhanced activation efficiency. Finally, the local chromatin environment restricts the loading of the Mcm2–7 double hexamer either upstream of or downstream from the ARS consensus sequence (ACS). PMID:25593310

A two steps solution approach to solving large nonlinear models: application to a problem of conjunctive use.

PubMed

Vieira, J; Cunha, M C

2011-01-01

This article describes a solution method of solving large nonlinear problems in two steps. The two steps solution approach takes advantage of handling smaller and simpler models and having better starting points to improve solution efficiency. The set of nonlinear constraints (named as complicating constraints) which makes the solution of the model rather complex and time consuming is eliminated from step one. The complicating constraints are added only in the second step so that a solution of the complete model is then found. The solution method is applied to a large-scale problem of conjunctive use of surface water and groundwater resources. The results obtained are compared with solutions determined with the direct solve of the complete model in one single step. In all examples the two steps solution approach allowed a significant reduction of the computation time. This potential gain of efficiency of the two steps solution approach can be extremely important for work in progress and it can be particularly useful for cases where the computation time would be a critical factor for having an optimized solution in due time.

Linear homotopy solution of nonlinear systems of equations in geodesy

NASA Astrophysics Data System (ADS)

Paláncz, Béla; Awange, Joseph L.; Zaletnyik, Piroska; Lewis, Robert H.

2010-01-01

A fundamental task in geodesy is solving systems of equations. Many geodetic problems are represented as systems of multivariate polynomials. A common problem in solving such systems is improper initial starting values for iterative methods, leading to convergence to solutions with no physical meaning, or to convergence that requires global methods. Though symbolic methods such as Groebner bases or resultants have been shown to be very efficient, i.e., providing solutions for determined systems such as 3-point problem of 3D affine transformation, the symbolic algebra can be very time consuming, even with special Computer Algebra Systems (CAS). This study proposes the Linear Homotopy method that can be implemented easily in high-level computer languages like C++ and Fortran that are faster than CAS by at least two orders of magnitude. Using Mathematica, the power of Homotopy is demonstrated in solving three nonlinear geodetic problems: resection, GPS positioning, and affine transformation. The method enlarging the domain of convergence is found to be efficient, less sensitive to rounding of numbers, and has lower complexity compared to other local methods like Newton-Raphson.

Neural Network Based Sensory Fusion for Landmark Detection

NASA Technical Reports Server (NTRS)

Kumbla, Kishan -K.; Akbarzadeh, Mohammad R.

1997-01-01

NASA is planning to send numerous unmanned planetary missions to explore the space. This requires autonomous robotic vehicles which can navigate in an unstructured, unknown, and uncertain environment. Landmark based navigation is a new area of research which differs from the traditional goal-oriented navigation, where a mobile robot starts from an initial point and reaches a destination in accordance with a pre-planned path. The landmark based navigation has the advantage of allowing the robot to find its way without communication with the mission control station and without exact knowledge of its coordinates. Current algorithms based on landmark navigation however pose several constraints. First, they require large memories to store the images. Second, the task of comparing the images using traditional methods is computationally intensive and consequently real-time implementation is difficult. The method proposed here consists of three stages, First stage utilizes a heuristic-based algorithm to identify significant objects. The second stage utilizes a neural network (NN) to efficiently classify images of the identified objects. The third stage combines distance information with the classification results of neural networks for efficient and intelligent navigation.

Parallel adaptive wavelet collocation method for PDEs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nejadmalayeri, Alireza, E-mail: Alireza.Nejadmalayeri@gmail.com; Vezolainen, Alexei, E-mail: Alexei.Vezolainen@Colorado.edu; Brown-Dymkoski, Eric, E-mail: Eric.Browndymkoski@Colorado.edu

2015-10-01

A parallel adaptive wavelet collocation method for solving a large class of Partial Differential Equations is presented. The parallelization is achieved by developing an asynchronous parallel wavelet transform, which allows one to perform parallel wavelet transform and derivative calculations with only one data synchronization at the highest level of resolution. The data are stored using tree-like structure with tree roots starting at a priori defined level of resolution. Both static and dynamic domain partitioning approaches are developed. For the dynamic domain partitioning, trees are considered to be the minimum quanta of data to be migrated between the processes. This allowsmore » fully automated and efficient handling of non-simply connected partitioning of a computational domain. Dynamic load balancing is achieved via domain repartitioning during the grid adaptation step and reassigning trees to the appropriate processes to ensure approximately the same number of grid points on each process. The parallel efficiency of the approach is discussed based on parallel adaptive wavelet-based Coherent Vortex Simulations of homogeneous turbulence with linear forcing at effective non-adaptive resolutions up to 2048{sup 3} using as many as 2048 CPU cores.« less

Starting Trees from Cuttings.

ERIC Educational Resources Information Center

Kramer, David C.

1983-01-01

Describes a procedure for starting tree cuttings from woody plants, explaining "lag time," recommending materials, and giving step-by-step instructions for rooting and planting. Points out species which are likely candidates for cuttings and provides tips for teachers for developing a unit. (JM)

Robotics virtual rail system and method

DOEpatents

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID; Walton, Miles C [Idaho Falls, ID

2011-07-05

A virtual track or rail system and method is described for execution by a robot. A user, through a user interface, generates a desired path comprised of at least one segment representative of the virtual track for the robot. Start and end points are assigned to the desired path and velocities are also associated with each of the at least one segment of the desired path. A waypoint file is generated including positions along the virtual track representing the desired path with the positions beginning from the start point to the end point including the velocities of each of the at least one segment. The waypoint file is sent to the robot for traversing along the virtual track.

Public transportation : New Starts program challenges and preliminary observations on expediting project development.

DOT National Transportation Integrated Search

2009-06-01

The New Starts program is an : important source of new capital : investment in mass transportation. : As required by the Safe, : Accountable, Flexible, Efficient : Transportation Equity Act: A : Legacy for Users, the Federal : Transit Administration ...

Study of nanosecond discharges in H2-air mixtures at atmospheric pressure for plasma assisted combustion applications

NASA Astrophysics Data System (ADS)

Kobayashi, Sumire; Bonaventura, Zdeněk; Tholin, Fabien; Popov, Nikolay A.; Bourdon, Anne

2017-07-01

This paper presents 2D simulations of nanosecond discharges between two point electrodes for four different H2-air mixtures defined by their equivalence ratios ϕ (i.e. φ =0, air, φ =0.3, lean mixture, φ =1, stoichiometric mixture and φ =1.5, rich mixture) at atmospheric pressure and at an initial temperature of 1000 K. In a first step, we have shown that the mixture composition has only a very small influence on the discharge dynamics and structure during the streamer phase and up to the formation of the plasma channel between the two point electrodes in H2-air mixtures with φ \\in [0,1.5]. However, as the plasma channel is formed slightly earlier as the equivalence ratio increases, for a given voltage pulse, the duration of the nanosecond spark phase increases as the equivalence ratio increases. As expected, we have shown that excited states of N2 (and in particular N2(A)) and radicals (and in particular O(D), O(P), H and OH) are very efficiently produced during the voltage pulse after the start of the spark phase. After the voltage pulse, and up to 100 ns, the densities of excited states of N2 and of O(D) decrease. Conversely, most of the O(P), H and OH radicals are produced after the voltage pulse due to the dissociative quenching of electronically excited N2. As for radicals, the gas temperature starts increasing after the start of the spark phase. For all studied mixtures, the density of O(P) atoms and the gas temperature reach their maxima after the end of the voltage pulse and the densities of O(P), H and OH radicals and the maximal gas temperature increase as the equivalence ratio increases. We have shown that the production of radicals is the highest on the discharge axis and the distribution of species after the voltage pulse and up to 100 ns has a larger diameter between the electrodes than close to both electrode tips. As for species, the temperature distribution presents two hot spots close to the point electrode tips. The non-uniform distributions of radical densities and gas temperature obtained after the nanosecond voltage pulse provide accurate initial conditions for 2D reactive flow codes to study the combustion ignition on longer timescales and compare with experiments.

Facial expression identification using 3D geometric features from Microsoft Kinect device

NASA Astrophysics Data System (ADS)

Han, Dongxu; Al Jawad, Naseer; Du, Hongbo

2016-05-01

Facial expression identification is an important part of face recognition and closely related to emotion detection from face images. Various solutions have been proposed in the past using different types of cameras and features. Microsoft Kinect device has been widely used for multimedia interactions. More recently, the device has been increasingly deployed for supporting scientific investigations. This paper explores the effectiveness of using the device in identifying emotional facial expressions such as surprise, smile, sad, etc. and evaluates the usefulness of 3D data points on a face mesh structure obtained from the Kinect device. We present a distance-based geometric feature component that is derived from the distances between points on the face mesh and selected reference points in a single frame. The feature components extracted across a sequence of frames starting and ending by neutral emotion represent a whole expression. The feature vector eliminates the need for complex face orientation correction, simplifying the feature extraction process and making it more efficient. We applied the kNN classifier that exploits a feature component based similarity measure following the principle of dynamic time warping to determine the closest neighbors. Preliminary tests on a small scale database of different facial expressions show promises of the newly developed features and the usefulness of the Kinect device in facial expression identification.

75 FR 81498 - Fisheries of the Northeastern United States; Summer Flounder, Scup, and Black Sea Bass Fisheries...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

... period will be addressed in July 2011, prior to the start of the 2011 Winter II fishery. Per the quota... inappropriate years of very low harvest as the foundation of the constant catch starting point. The commenters... summer flounder quota at the start of the fishing year that begins January 1, 2011, is required by the...

Developmental time windows for axon growth influence neuronal network topology.

PubMed

Lim, Sol; Kaiser, Marcus

2015-04-01

Early brain connectivity development consists of multiple stages: birth of neurons, their migration and the subsequent growth of axons and dendrites. Each stage occurs within a certain period of time depending on types of neurons and cortical layers. Forming synapses between neurons either by growing axons starting at similar times for all neurons (much-overlapped time windows) or at different time points (less-overlapped) may affect the topological and spatial properties of neuronal networks. Here, we explore the extreme cases of axon formation during early development, either starting at the same time for all neurons (parallel, i.e., maximally overlapped time windows) or occurring for each neuron separately one neuron after another (serial, i.e., no overlaps in time windows). For both cases, the number of potential and established synapses remained comparable. Topological and spatial properties, however, differed: Neurons that started axon growth early on in serial growth achieved higher out-degrees, higher local efficiency and longer axon lengths while neurons demonstrated more homogeneous connectivity patterns for parallel growth. Second, connection probability decreased more rapidly with distance between neurons for parallel growth than for serial growth. Third, bidirectional connections were more numerous for parallel growth. Finally, we tested our predictions with C. elegans data. Together, this indicates that time windows for axon growth influence the topological and spatial properties of neuronal networks opening up the possibility to a posteriori estimate developmental mechanisms based on network properties of a developed network.

The Pepsi Challenge: Building a Leader-Driven Organization.

ERIC Educational Resources Information Center

Tichy, Noel M.; DeRose, Christopher

1996-01-01

PepsiCo's change-leadership model starts with a teachable point of view, showing trainees how to think in different terms, develop a point of view, test it, crystallize the vision, and implement it. The human resources department plays an important role in articulating the point of view. (SK)

Travelling Randomly on the Poincaré Half-Plane with a Pythagorean Compass

NASA Astrophysics Data System (ADS)

Cammarota, V.; Orsingher, E.

2008-02-01

A random motion on the Poincaré half-plane is studied. A particle runs on the geodesic lines changing direction at Poisson-paced times. The hyperbolic distance is analyzed, also in the case where returns to the starting point are admitted. The main results concern the mean hyperbolic distance (and also the conditional mean distance) in all versions of the motion envisaged. Also an analogous motion on orthogonal circles of the sphere is examined and the evolution of the mean distance from the starting point is investigated.

CREPT-MCNP code for efficiency calibration of HPGe detectors with the representative point method.

PubMed

Saegusa, Jun

2008-01-01

The representative point method for the efficiency calibration of volume samples has been previously proposed. For smoothly implementing the method, a calculation code named CREPT-MCNP has been developed. The code estimates the position of a representative point which is intrinsic to each shape of volume sample. The self-absorption correction factors are also given to make correction on the efficiencies measured at the representative point with a standard point source. Features of the CREPT-MCNP code are presented.

77 FR 65815 - Special Local Regulations; Marine Events in the Seventh Coast Guard District

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... imaginary line connecting the following points: Starting at Point 1 in position 24[deg]32'08'' N, 81[deg]50'19'' W; thence east to Point 2 in position 24[deg]32'23'' N, 81[deg]48'58'' W; thence northeast to Point 3 in position 24[deg]33'14'' N, 81[deg]48'47'' W; thence northeast to Point 4 in position 24[deg...

CwicStart - a proof-of-concept client for the CEOSWGISS Integrated Catalog (CWIC)

NASA Astrophysics Data System (ADS)

Newman, D. J.; Mitchell, A. E.

2012-12-01

Keywords - Earth Science, data discovery, agile development, ruby on rails, catalog, OGC Audience - Earth Science application developers What is CwicStart CwicStart is a prototypical earth science data discovery web application designed, developed and hosted by NASA's Earth Observing System (EOS) Clearinghouse (ECHO). CwicStart searches the CEOS WGISS Integrated Catalog (CWIC) to provide users with dataset and granule level metadata from sources as diverse as NASA, NOAA, INPE and AOE. CwicStart demonstrates the ease of which it is possible to stand up a functioning client against the CWIC. From start to finish, CwicStart was designed, developed and deployed in one month. Built from OGC getCapabilities document of CWIC The CwicStart application takes the OGC getCapabilities (http://www.opengeospatial.org/standards/is) document describing CWIC, as it's starting point for providing a user interface suitable for interrogating CWIC. Consequently, it can allow the user to constrain their search by the following criteria, - Generic search terms - Spatial bounding box - Start date/time and end date/time - ISO-queryable key-value pairs User Interface inspired by Reverb ECHO's state-of-the-art earth science discovery tool, Reverb (http://reverb.echo.nasa.gov) was used as a guideline for the user interface components of CwicStart. It incorporates OpenLayers to provide point-and-click spatial constraint specification and calendar input for temporal constraints. Discovery involves two phases: dataset discovery and granule discovery with full pagination support for large results sets. CwicStart supports 'graceful degradation' of support for multiple browsers and accessibility requirements. Implemented in Ruby on Rails for Agile Development CwicStart is implemented in Ruby on Rails, a dynamic, rapid development language and environment that facilitates Agile development and is resilient to changing requirements. Using an Agile development methodology ECHO was able to stand up the first iteration of CwicStart in an iteration lasting only one week. Three subsequent week-long iterations delivered the current functionality. CwicStart can be found at the following location, https://testbed.echo.nasa.gov/cwic-start/ About CWIC The WGISS team provides an application, the CEOS WGISS Integrated Catalog (CWIC) with the following capabilities. - Provide an access point for major CEOS agency catalog systems. - Interface to user interface clients by using the GEO standards. - Send directory/collection searches to the International Directory Network. - Distribute inventory/product searches to the CEOS agency inventory systems using the agency systems native protocol. - Offered as the CEOS community catalog as part of the GEO common infrastructure. CWIC Partners - Committee on Earth Observing Satellites (CEOS) - International Directory Network (IDN) - U.S. National Aeronautics and Space (NASA) - Earth Observing System (EOS) Clearinghouse (ECHO) - U.S. National Oceanographic and Atmospheric Administration (NOAA) - Comprehensive Large Array Data Stewardship System (CLASS) - U.S. Geological Survey (USGS) - Landsat Catalog System - U.S. Geological Survey (USGS) - LSI Portal - National Institute for Space Research (INPE), Brazil - Academy of Opto-Electronics (AOE), Chinese Academy of Sciences (CAS)

Establishing the Learning Curve of Robotic Sacral Colpopexy in a Start-up Robotics Program.

PubMed

Sharma, Shefali; Calixte, Rose; Finamore, Peter S

2016-01-01

To determine the learning curve of the following segments of a robotic sacral colpopexy: preoperative setup, operative time, postoperative transition, and room turnover. A retrospective cohort study to determine the number of cases needed to reach points of efficiency in the various segments of a robotic sacral colpopexy (Canadian Task Force II-2). A university-affiliated community hospital. Women who underwent robotic sacral colpopexy at our institution from 2009 to 2013 comprise the study population. Patient characteristics and operative reports were extracted from a patient database that has been maintained since the inception of the robotics program at Winthrop University Hospital and electronic medical records. Based on additional procedures performed, 4 groups of patients were created (A-D). Learning curves for each of the segment times of interest were created using penalized basis spline (B-spline) regression. Operative time was further analyzed using an inverse curve and sequential grouping. A total of 176 patients were eligible. Nonparametric tests detected no difference in procedure times between the 4 groups (A-D) of patients. The preoperative and postoperative points of efficiency were 108 and 118 cases, respectively. The operative points of proficiency and efficiency were 25 and 36 cases, respectively. Operative time was further analyzed using an inverse curve that revealed that after 11 cases the surgeon had reached 90% of the learning plateau. Sequential grouping revealed no significant improvement in operative time after 60 cases. Turnover time could not be assessed because of incomplete data. There is a difference in the operative time learning curve for robotic sacral colpopexy depending on the statistical analysis used. The learning curve of the operative segment showed an improvement in operative time between 25 and 36 cases when using B-spline regression. When the data for operative time was fit to an inverse curve, a learning rate of 11 cases was appreciated. Using sequential grouping to describe the data, no improvement in operative time was seen after 60 cases. Ultimately, we believe that efficiency in operative time is attained after 30 to 60 cases when performing robotic sacral colpopexy. The learning curve for preoperative setup and postoperative transition, which is reflective of anesthesia and nursing staff, was approximately 110 cases. Copyright © 2016 AAGL. Published by Elsevier Inc. All rights reserved.

Ground Motion Simulation for a Large Active Fault System using Empirical Green's Function Method and the Strong Motion Prediction Recipe - a Case Study of the Noubi Fault Zone -

NASA Astrophysics Data System (ADS)

Kuriyama, M.; Kumamoto, T.; Fujita, M.

2005-12-01

The 1995 Hyogo-ken Nambu Earthquake (1995) near Kobe, Japan, spurred research on strong motion prediction. To mitigate damage caused by large earthquakes, a highly precise method of predicting future strong motion waveforms is required. In this study, we applied empirical Green's function method to forward modeling in order to simulate strong ground motion in the Noubi Fault zone and examine issues related to strong motion prediction for large faults. Source models for the scenario earthquakes were constructed using the recipe of strong motion prediction (Irikura and Miyake, 2001; Irikura et al., 2003). To calculate the asperity area ratio of a large fault zone, the results of a scaling model, a scaling model with 22% asperity by area, and a cascade model were compared, and several rupture points and segmentation parameters were examined for certain cases. A small earthquake (Mw: 4.6) that occurred in northern Fukui Prefecture in 2004 were examined as empirical Green's function, and the source spectrum of this small event was found to agree with the omega-square scaling law. The Nukumi, Neodani, and Umehara segments of the 1891 Noubi Earthquake were targeted in the present study. The positions of the asperity area and rupture starting points were based on the horizontal displacement distributions reported by Matsuda (1974) and the fault branching pattern and rupture direction model proposed by Nakata and Goto (1998). Asymmetry in the damage maps for the Noubi Earthquake was then examined. We compared the maximum horizontal velocities for each case that had a different rupture starting point. In the case, rupture started at the center of the Nukumi Fault, while in another case, rupture started on the southeastern edge of the Umehara Fault; the scaling model showed an approximately 2.1-fold difference between these cases at observation point FKI005 of K-Net. This difference is considered to relate to the directivity effect associated with the direction of rupture propagation. Moreover, it was clarified that the horizontal velocities by assuming the cascade model was underestimated more than one standard deviation of empirical relation by Si and Midorikawa (1999). The scaling and cascade models showed an approximately 6.4-fold difference for the case, in which the rupture started along the southeastern edge of the Umehara Fault at observation point GIF020. This difference is significantly large in comparison with the effect of different rupture starting points, and shows that it is important to base scenario earthquake assumptions on active fault datasets before establishing the source characterization model. The distribution map of seismic intensity for the 1891 Noubi Earthquake also suggests that the synthetic waveforms in the southeastern Noubi Fault zone may be underestimated. Our results indicate that outer fault parameters (e.g., earthquake moment) related to the construction of scenario earthquakes influence strong motion prediction, rather than inner fault parameters such as the rupture starting point. Based on these methods, we will predict strong motion for approximately 140 to 150 km of the Itoigawa-Shizuoka Tectonic Line.

The effect of handover location on trauma theatre start time: An estimated cost saving of £131 000 per year.

PubMed

Nahas, Sam; Ali, Adam; Majid, Kiran; Joseph, Roshan; Huber, Chris; Babu, Victor

2018-02-08

The National Health Service was estimated to be in £2.45 billion deficit in 2015 to 2016. Trauma theatre utilization and efficiency has never been so important as it is estimated to cost £15/minute. Structured questionnaires were given to 23 members of staff at our Trust who are actively involved in the organization or delivery of orthopaedic trauma lists at least once per week. This was used to identify key factors that may improve theatre efficiency. Following focus group evaluation, the location of the preoperative theatre meeting was changed, with all staff involved being required to attend this. Our primary outcome measure was mean theatre start time (time of arrival in the anaesthetic room) during the 1 month immediately preceding the change and the month following the change. Theatre start time was improved on average 24 minutes (1 month premeeting and postmeeting change). This equates to a saving of £360 per day, or £131 040 per year. Changing the trauma meeting location to a venue adjacent to the trauma theatre can improve theatre start times, theatre efficiency, and therefore result in significant cost savings. Copyright © 2018 John Wiley & Sons, Ltd.

Avalanche of entanglement and correlations at quantum phase transitions.

PubMed

Krutitsky, Konstantin V; Osterloh, Andreas; Schützhold, Ralf

2017-06-16

We study the ground-state entanglement in the quantum Ising model with nearest neighbor ferromagnetic coupling J and find a sequential increase of entanglement depth d with growing J. This entanglement avalanche starts with two-point entanglement, as measured by the concurrence, and continues via the three-tangle and four-tangle, until finally, deep in the ferromagnetic phase for J = ∞, arriving at a pure L-partite (GHZ type) entanglement of all L spins. Comparison with the two, three, and four-point correlations reveals a similar sequence and shows strong ties to the above entanglement measures for small J. However, we also find a partial inversion of the hierarchy, where the four-point correlation exceeds the three- and two-point correlations, well before the critical point is reached. Qualitatively similar behavior is also found for the Bose-Hubbard model, suggesting that this is a general feature of a quantum phase transition. This should be taken into account in the approximations starting from a mean-field limit.

Spectral properties from Matsubara Green's function approach: Application to molecules

NASA Astrophysics Data System (ADS)

Schüler, M.; Pavlyukh, Y.

2018-03-01

We present results for many-body perturbation theory for the one-body Green's function at finite temperatures using the Matsubara formalism. Our method relies on the accurate representation of the single-particle states in standard Gaussian basis sets, allowing to efficiently compute, among other observables, quasiparticle energies and Dyson orbitals of atoms and molecules. In particular, we challenge the second-order treatment of the Coulomb interaction by benchmarking its accuracy for a well-established test set of small molecules, which includes also systems where the usual Hartree-Fock treatment encounters difficulties. We discuss different schemes how to extract quasiparticle properties and assess their range of applicability. With an accurate solution and compact representation, our method is an ideal starting point to study electron dynamics in time-resolved experiments by the propagation of the Kadanoff-Baym equations.

The psychiatric hospital and its place in a mental health service

PubMed Central

Tooth, Geoffrey

1958-01-01

Modern methods of treatment of mental disease enable the average length of stay in hospital to be drastically reduced. The former overcrowding is therefore disappearing; in fact, it should be possible to contemplate a reduction in the size of the hospitals, particularly if new admissions are kept to a minimum by the provision of efficient out-patient clinics and of adequate geriatric and domiciliary nursing services. Taking recent trends in England and Wales as his starting point, the author outlines ways in which a modern mental health service might be built up around existing facilities under a variety of conditions. He advocates that, as far as possible, the treatment of mental disease should be integrated into general medicine, and emphasises the need for close co-operation between psychiatrists, family doctors, and the staff of general hospitals. PMID:13585081

Approximations to the exact exchange potential: KLI versus semilocal

NASA Astrophysics Data System (ADS)

Tran, Fabien; Blaha, Peter; Betzinger, Markus; Blügel, Stefan

2016-10-01

In the search for an accurate and computationally efficient approximation to the exact exchange potential of Kohn-Sham density functional theory, we recently compared various semilocal exchange potentials to the exact one [F. Tran et al., Phys. Rev. B 91, 165121 (2015), 10.1103/PhysRevB.91.165121]. It was concluded that the Becke-Johnson (BJ) potential is a very good starting point, but requires the use of empirical parameters to obtain good agreement with the exact exchange potential. In this work, we extend the comparison by considering the Krieger-Li-Iafrate (KLI) approximation, which is a beyond-semilocal approximation. It is shown that overall the KLI- and BJ-based potentials are the most reliable approximations to the exact exchange potential, however, sizable differences, especially for the antiferromagnetic transition-metal oxides, can be obtained.

A comparative analysis of tellurite detoxification by members of the genus Shewanella.

PubMed

Valdivia-González, M A; Díaz-Vásquez, W A; Ruiz-León, D; Becerra, A A; Aguayo, D R; Pérez-Donoso, J M; Vásquez, C C

2018-03-01

The increasing industrial utilization of tellurium has resulted in an important environmental pollution with the soluble, extremely toxic oxyanion tellurite. In this context, the use of microorganisms for detoxifying tellurite or tellurium biorecovery has gained great interest. The ability of different Shewanella strains to reduce tellurite to elemental tellurium was assessed; the results showed that the reduction process is dependent on electron transport and the ∆pH gradient. While S. baltica OS155 showed the highest tellurite resistance, S. putrefaciens was the most efficient in reducing tellurite. Moreover, pH-dependent tellurite transformation was associated with tellurium precipitation as tellurium dioxide. In summary, this work highlights the high tellurite reduction/detoxification ability exhibited by a number of Shewanella species, which could represent the starting point to develop friendly methods for the recovery of elemental tellurium (or tellurium dioxide).

Strong Coupling Corrections in Quantum Thermodynamics

NASA Astrophysics Data System (ADS)

Perarnau-Llobet, M.; Wilming, H.; Riera, A.; Gallego, R.; Eisert, J.

2018-03-01

Quantum systems strongly coupled to many-body systems equilibrate to the reduced state of a global thermal state, deviating from the local thermal state of the system as it occurs in the weak-coupling limit. Taking this insight as a starting point, we study the thermodynamics of systems strongly coupled to thermal baths. First, we provide strong-coupling corrections to the second law applicable to general systems in three of its different readings: As a statement of maximal extractable work, on heat dissipation, and bound to the Carnot efficiency. These corrections become relevant for small quantum systems and vanish in first order in the interaction strength. We then move to the question of power of heat engines, obtaining a bound on the power enhancement due to strong coupling. Our results are exemplified on the paradigmatic non-Markovian quantum Brownian motion.

Modelling human problem solving with data from an online game.

PubMed

Rach, Tim; Kirsch, Alexandra

2016-11-01

Since the beginning of cognitive science, researchers have tried to understand human strategies in order to develop efficient and adequate computational methods. In the domain of problem solving, the travelling salesperson problem has been used for the investigation and modelling of human solutions. We propose to extend this effort with an online game, in which instances of the travelling salesperson problem have to be solved in the context of a game experience. We report on our effort to design and run such a game, present the data contained in the resulting openly available data set and provide an outlook on the use of games in general for cognitive science research. In addition, we present three geometrical models mapping the starting point preferences in the problems presented in the game as the result of an evaluation of the data set.

A 15,000-hour cyclic endurance test of an 8-centimeter-diameter electron bombardment mercury ion thruster

NASA Technical Reports Server (NTRS)

Nakanishi, S.

1976-01-01

A laboratory model 8-cm thruster with improvements to minimize ion chamber erosion and peeling of sputtered metal was subjected to a cyclic endurance test for 15,040 hours and 460 restarts. A charted history of several thruster operating variables and off-normal events are shown in 600-hour segments at three points in the test. The transient behavior of these variables during a typical start-stop cycle is presented. Performance and operating characteristics were nearly constant throughout the test except for a change in the accelerator back-streaming limit. Findings of the post-test inspection confirmed most of the expected results. Charge-exchange ions caused normal accelerator grid erosion. The workability of the various design features have been substantiated, and attainable improvements in propellant utilization efficiency should significantly reduce accelerator erosion.

Realizing universal Majorana fermionic quantum computation

NASA Astrophysics Data System (ADS)

Wu, Ya-Jie; He, Jing; Kou, Su-Peng

2014-08-01

Majorana fermionic quantum computation (MFQC) was proposed by S. B. Bravyi and A. Yu. Kitaev [Ann. Phys. (NY) 298, 210 (2002), 10.1006/aphy.2002.6254], who indicated that a (nontopological) fault-tolerant quantum computer built from Majorana fermions may be more efficient than that built from distinguishable two-state systems. However, until now scientists have not known how to realize a MFQC in a physical system. In this paper we propose a possible realization of MFQC. We find that the end of a line defect of a p-wave superconductor or superfluid in a honeycomb lattice traps a Majorana zero mode, which becomes the starting point of MFQC. Then we show how to manipulate Majorana fermions to perform universal MFQC, which possesses possibilities for high-level local controllability through individually addressing the quantum states of individual constituent elements by using timely cold-atom technology.

A bootstrap based Neyman-Pearson test for identifying variable importance.

PubMed

Ditzler, Gregory; Polikar, Robi; Rosen, Gail

2015-04-01

Selection of most informative features that leads to a small loss on future data are arguably one of the most important steps in classification, data analysis and model selection. Several feature selection (FS) algorithms are available; however, due to noise present in any data set, FS algorithms are typically accompanied by an appropriate cross-validation scheme. In this brief, we propose a statistical hypothesis test derived from the Neyman-Pearson lemma for determining if a feature is statistically relevant. The proposed approach can be applied as a wrapper to any FS algorithm, regardless of the FS criteria used by that algorithm, to determine whether a feature belongs in the relevant set. Perhaps more importantly, this procedure efficiently determines the number of relevant features given an initial starting point. We provide freely available software implementations of the proposed methodology.

A Parametric Geometry Computational Fluid Dynamics (CFD) Study Utilizing Design of Experiments (DOE)

NASA Technical Reports Server (NTRS)

Rhew, Ray D.; Parker, Peter A.

2007-01-01

Design of Experiments (DOE) was applied to the LAS geometric parameter study to efficiently identify and rank primary contributors to integrated drag over the vehicles ascent trajectory in an order of magnitude fewer CFD configurations thereby reducing computational resources and solution time. SME s were able to gain a better understanding on the underlying flowphysics of different geometric parameter configurations through the identification of interaction effects. An interaction effect, which describes how the effect of one factor changes with respect to the levels of other factors, is often the key to product optimization. A DOE approach emphasizes a sequential approach to learning through successive experimentation to continuously build on previous knowledge. These studies represent a starting point for expanded experimental activities that will eventually cover the entire design space of the vehicle and flight trajectory.

Comparison of Automated Atlas-Based Segmentation Software for Postoperative Prostate Cancer Radiotherapy

PubMed Central

Delpon, Grégory; Escande, Alexandre; Ruef, Timothée; Darréon, Julien; Fontaine, Jimmy; Noblet, Caroline; Supiot, Stéphane; Lacornerie, Thomas; Pasquier, David

2016-01-01

Automated atlas-based segmentation (ABS) algorithms present the potential to reduce the variability in volume delineation. Several vendors offer software that are mainly used for cranial, head and neck, and prostate cases. The present study will compare the contours produced by a radiation oncologist to the contours computed by different automated ABS algorithms for prostate bed cases, including femoral heads, bladder, and rectum. Contour comparison was evaluated by different metrics such as volume ratio, Dice coefficient, and Hausdorff distance. Results depended on the volume of interest showed some discrepancies between the different software. Automatic contours could be a good starting point for the delineation of organs since efficient editing tools are provided by different vendors. It should become an important help in the next few years for organ at risk delineation. PMID:27536556

Method and apparatus for selectively controlling the speed of an engine

DOEpatents

Davis, Roy Inge

2001-02-27

A control assembly 12 for use within a vehicle 10 having an engine 14 and which selectively controls the speed of the engine 14 in order to increase fuel efficiency and to effect relatively smooth starting and stopping of the engine. Particularly, in one embodiment, control assembly 12 cooperatively operates with a starter/alternator assembly 20 and is adapted for use with hybrid vehicles employing a start/stop powertrain assembly, wherein fuel efficiency is increased by selectively stopping engine operation when the vehicle has stopped.

Get Started: Energy Efficiency Makes More Sense Than Ever.

ERIC Educational Resources Information Center

Alban, Josh; Drabick, J. R.

2003-01-01

Describes the benefits of making school building more energy efficient. Provides examples of physical retrofits and behavioral changes to save energy costs. Describes four-step process to create an energy efficiency plan. Includes resources and information such as U.S. Department of Energy's Energy STAR program (www.energystar.gov). (PKP)

LiveWire interactive boundary extraction algorithm based on Haar wavelet transform and control point set direction search

NASA Astrophysics Data System (ADS)

Cheng, Jun; Zhang, Jun; Tian, Jinwen

2015-12-01

Based on deep analysis of the LiveWire interactive boundary extraction algorithm, a new algorithm focusing on improving the speed of LiveWire algorithm is proposed in this paper. Firstly, the Haar wavelet transform is carried on the input image, and the boundary is extracted on the low resolution image obtained by the wavelet transform of the input image. Secondly, calculating LiveWire shortest path is based on the control point set direction search by utilizing the spatial relationship between the two control points users provide in real time. Thirdly, the search order of the adjacent points of the starting node is set in advance. An ordinary queue instead of a priority queue is taken as the storage pool of the points when optimizing their shortest path value, thus reducing the complexity of the algorithm from O[n2] to O[n]. Finally, A region iterative backward projection method based on neighborhood pixel polling has been used to convert dual-pixel boundary of the reconstructed image to single-pixel boundary after Haar wavelet inverse transform. The algorithm proposed in this paper combines the advantage of the Haar wavelet transform and the advantage of the optimal path searching method based on control point set direction search. The former has fast speed of image decomposition and reconstruction and is more consistent with the texture features of the image and the latter can reduce the time complexity of the original algorithm. So that the algorithm can improve the speed in interactive boundary extraction as well as reflect the boundary information of the image more comprehensively. All methods mentioned above have a big role in improving the execution efficiency and the robustness of the algorithm.

Understanding the Budget Battle.

ERIC Educational Resources Information Center

Hritz, Townley

1996-01-01

Describes Head Start's financial uncertainty for the future due to the government's budget battle. Presents information on the key points in the budget process, how that process got off track in fiscal year 1996, the resulting government shutdowns, and how Head Start can prepare for the 1997 budget debates. (MOK)

A burner for plasma-coal starting of a boiler

NASA Astrophysics Data System (ADS)

Peregudov, V. S.

2008-04-01

Advanced schemes of a plasma-coal burner with single-and two-stage chambers for thermochemical preparation of fuel are described. The factors causing it becoming contaminated with slag during oil-free starting of a boiler are considered, and methods for preventing this phenomenon are pointed out.

A systematic approach to sound decision making starts with financial reporting.

PubMed

Taylor, R B

1989-11-01

Managers and supervisors need information to measure departmental performance. Designing a reporting system requires managers to obtain needed information without being flooded by extraneous data. A reporting framework designed to examine five control points is a necessary tool, and a good place to start.

Effect of the transverse nonuniformity of the radiofrequency field on the start current and efficiency of gyrodevices with confocal mirrors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nusinovich, Gregory S.; Chainani, Samir; Granatstein, Victor L.

The theory is developed for analyzing the effect of transverse nonuniformity of the radiofrequency (rf) field on the starting conditions and efficiency of such gyrotron oscillators as gyromonotrons and gyro-backward-wave oscillators (gyro-BWO). The formalism allows one to study this effect in oscillators operating in the regimes of soft and hard self-excitation. Results obtained for a device with a confocal waveguide (or resonator) are compared with the results for conventional gyrodevices where the rf field acting on electrons with different guiding centers is the same. It is shown how to use results of the classical small-signal theory of backward-wave oscillators drivenmore » by linear electron beams for calculating the start currents in gyro-BWOs. The effect of the wave attenuation in waveguide walls on the start current is analyzed, which is important for the design of frequency-tunable gyro-backward-wave oscillators in the THz (and sub THz) frequency range.« less

Challenges in Maintaining Emotion Regulation in a Sleep and Energy Deprived State Induced by the 4800Km Ultra-Endurance Bicycle Race; The Race Across AMerica (RAAM).

PubMed

Lahart, Ian M; Lane, Andrew M; Hulton, Andrew; Williams, Karen; Godfrey, Richard; Pedlar, Charles; Wilson, Mathew G; Whyte, Gregory P

2013-01-01

Multiday ultra-endurance races present athletes with a significant number of physiological and psychological challenges. We examined emotions, the perceived functionality (optimal-dysfunctional) of emotions, strategies to regulate emotions, sleep quality, and energy intake-expenditure in a four-man team participating in the Race Across AMerica (RAAM); a 4856km continuous cycle race. Cyclists reported experiencing an optimal emotional state for less than 50% of total competition, with emotional states differing significantly between each cyclist over time. Coupled with this emotional disturbance, each cyclist experienced progressively worsening sleep deprivation and daily negative energy balances throughout the RAAM. Cyclists managed less than one hour of continuous sleep per sleep episode, high sleep latency and high percentage moving time. Of note, actual sleep and sleep efficiency were better maintained during longer rest periods, highlighting the importance of a race strategy that seeks to optimise the balance between average cycling velocity and sleep time. Our data suggests that future RAAM cyclists and crew should: 1) identify beliefs on the perceived functionality of emotions in relation to best (functional-optimal) and worst (dysfunctional) performance as the starting point to intervention work; 2) create a plan for support sufficient sleep and recovery; 3) create nutritional strategies that maintain energy intake and thus reduce energy deficits; and 4) prepare for the deleterious effects of sleep deprivation so that they are able to appropriately respond to unexpected stressors and foster functional working interpersonal relationships. Key PointsCompleting the Race Across AMerica (RAAM); a 4856km continuous cycle race associated with sleep disturbance, an energy-deficient state, and experiencing intense unwanted emotions.Cyclists reported experiencing an optimal emotional state for less than 50% of total competition and actual sleep and sleep efficiency was better maintained during longer rest periods.We suggest that future RAAM cyclists and crew should:Identify individual beliefs on the perceived functionality of emotional states in relation to best (optimal) and worst (dysfunctional) performance as the starting point to identifying if emotion regulation strategies should be initiated.Plan for enhanced sleep and recovery not just plan and train for maintaining a high average velocity;Create nutritional strategies that maintain energy intake and thus reduce energy deficits;Psychologically prepare cyclists and crew for the deleterious effects of sleep deprivation so that they both are able to appropriately respond to unexpected stressors and foster functional interpersonal working relationships.

Active versus Passive Proprioceptive Straight-Ahead Pointing in Normal Subjects

ERIC Educational Resources Information Center

Chokron, Sylvie; Colliot, Pascale; Atzeni, Thierry; Bartolomeo, Paolo; Ohlmann, Theophile

2004-01-01

Eighty blindfolded healthy female subjects participated in an active and a passive straight-ahead pointing task to study the estimation of the subjective sagittal middle in the presence or absence of an active haptic exploration. Subjects were to point straight-ahead with their left or right index finger starting from different right- or…

Strategy and Grand Strategy: What Students and Practitioners Need to Know

DTIC Science & Technology

2015-12-01

available, acceptable, and well-suited to the purpose for which they will be used. These questions, though crucial, are only a starting place... starting point (rarely an ideal one) and then constantly reassessing the situation in light of changing conditions. This requires an ongoing...him.87 In the end, Britain and France reluctantly decided that they had to stand up to Hitler’s challenge to the international system. At the start

Virtual war, military revolutions, and networks: a guide through the concepts from an Australian perspective

NASA Astrophysics Data System (ADS)

Bowley, Dean K.; Gaertner, Paul S.

2003-07-01

In this paper the argument is made that the offensive fire support organisation and doctrine, born of the "indirect fire revolution" of the first world war, is the start point for distributed sensors, shooters and deciders that may be transferred to a joint force; that the culture of directive control and mission orders developed by the German Army in 1918 and then adopted by most western armies is the start point for the culture required to achieve "self synchronisation" and that the network developed for the air defence of carrier battle groups is the start point for developing a networked ground manoeuvre force. We discuss the strategic expectations of network centric warfare, a "virtual war" scenario and the inherent vulnerabilities. The current level of understanding and implementation in specific areas is analysed and lessons for general application are developed and the potential payoff identified. Three broad operational domains are investigated, networked platform versus platform warfare between states, guerrilla/counter-insurfence operations and the emerging domain of "netwars" (terror organisations and criminal gangs).

A hierarchical wavefront reconstruction algorithm for gradient sensors

NASA Astrophysics Data System (ADS)

Bharmal, Nazim; Bitenc, Urban; Basden, Alastair; Myers, Richard

2013-12-01

ELT-scale extreme adaptive optics systems will require new approaches tocompute the wavefront suitably quickly, when the computational burden ofapplying a MVM is no longer practical. An approach is demonstrated here whichis hierarchical in transforming wavefront slopes from a WFS into a wavefront,and then to actuator values. First, simple integration in 1D is used to create1D-wavefront estimates with unknown starting points at the edges of independentspatial domains. Second, these starting points are estimated globally. By thesestarting points are a sub-set of the overall grid where wavefront values are tobe estimated, sparse representations are produced and numerical complexity canbe chosen by the spacing of the starting point grid relative to the overallgrid. Using a combination of algebraic expressions, sparse representation, anda conjugate gradient solver, the number of non-parallelized operations forreconstruction on a 100x100 sub-aperture sized problem is ~600,000 or O(N^3/2),which is approximately the same as for each thread of a MVM solutionparallelized over 100 threads. To reduce the effects of noise propagationwithin each domain, a noise reduction algorithm can be applied which ensuresthe continuity of the wavefront. To apply this additional step has a cost of~1,200,000 operations. We conclude by briefly discussing how the final step ofconverting from wavefront to actuator values can be achieved.

Effects of placement point of background music on shopping website.

PubMed

Lai, Chien-Jung; Chiang, Chia-Chi

2012-01-01

Consumer on-line behaviors are more important than ever due to highly growth of on-line shopping. The purposes of this study were to design placement methods of background music for shopping website and examine the effect on browsers' emotional and cognitive response. Three placement points of background music during the browsing, i.e. 2 min., 4 min., and 6 min. from the start of browsing were considered for entry points. Both browsing without music (no music) and browsing with constant music volume (full music) were treated as control groups. Participants' emotional state, approach-avoidance behavior intention, and action to adjust music volume were collected. Results showed that participants had a higher level of pleasure, arousal and approach behavior intention for the three placement points than for no music and full music. Most of the participants for full music (5/6) adjusted the background music. Only 16.7% (3/18) participants for other levels turn off the background music. The results indicate that playing background music after the start of browsing is benefit for on-line shopping atmosphere. It is inappropriate to place background music at the start of browsing shopping website. The marketer must manipulated placement methods of background music for a web store carefully.

78 FR 18475 - Special Local Regulations; Stuart Sailfish Regatta, Indian River; Stuart, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... Cove that are encompassed within an imaginary line connecting the following points: Starting at Point 1 in position 27[deg]12'46'' N, 80[deg]11'10'' W; thence southeast to Point 2 in position 27[deg]12'41'' N, 80[deg]11'09'' W; thence southwest to Point 3 in position 27[deg]12'37'' N, 80[deg]11'11'' W...

78 FR 1792 - Special Local Regulations, Stuart Sailfish Regatta, Indian River; Stuart, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... that are encompassed within an imaginary line connecting the following points: starting at Point 1 in position 27[deg]12'46'' N, 80[deg]11'09'' W; thence southeast to Point 2 in position 27[deg]12'41'' N, 80[deg]11'08'' W; thence southwest to Point 3 in position 27[deg]12'37'' N, 80[deg]11'11'' W; thence...

Identification of high-efficiency 3'GG gRNA motifs in indexed FASTA files with ngg2.

PubMed

Roberson, Elisha D O

CRISPR/Cas9 is emerging as one of the most-used methods of genome modification in organisms ranging from bacteria to human cells. However, the efficiency of editing varies tremendously site-to-site. A recent report identified a novel motif, called the 3'GG motif, which substantially increases the efficiency of editing at all sites tested in C. elegans . Furthermore, they highlighted that previously published gRNAs with high editing efficiency also had this motif. I designed a python command-line tool, ngg2, to identify 3'GG gRNA sites from indexed FASTA files. As a proof-of-concept, I screened for these motifs in six model genomes: Saccharomyces cerevisiae , Caenorhabditis elegans , Drosophila melanogaster , Danio rerio , Mus musculus , and Homo sapiens. I also scanned the genomes of pig ( Sus scrofa ) and African elephant ( Loxodonta africana ) to demonstrate the utility in non-model organisms. I identified more than 60 million single match 3'GG motifs in these genomes. Greater than 61% of all protein coding genes in the reference genomes had at least one unique 3'GG gRNA site overlapping an exon. In particular, more than 96% of mouse and 93% of human protein coding genes have at least one unique, overlapping 3'GG gRNA. These identified sites can be used as a starting point in gRNA selection, and the ngg2 tool provides an important ability to identify 3'GG editing sites in any species with an available genome sequence.

Making Sense of Energy

ERIC Educational Resources Information Center

Boohan, Richard

2014-01-01

This article describes an approach to teaching about the energy concept that aims to be accessible to students starting in early secondary school, while being scientifically rigorous and forming the foundation for later work. It discusses how exploring thermal processes is a good starting point for a more general consideration of the ways that…

40 CFR 86.135-90 - Dynamometer procedure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... startup and operation over the first 505 seconds of the driving schedule complete the hot start test. The... 505 seconds of the driving schedule complete the hot start test. The exhaust emissions are diluted... over the prescribed driving schedule may be performed at test point, provided an emission sample is not...

40 CFR 86.135-90 - Dynamometer procedure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... startup and operation over the first 505 seconds of the driving schedule complete the hot start test. The... 505 seconds of the driving schedule complete the hot start test. The exhaust emissions are diluted... over the prescribed driving schedule may be performed at test point, provided an emission sample is not...

Getting started with package sampSurf

Treesearch

Jeffrey H. Gove

2014-01-01

The sampSurf package is designed to facilitate the comparison of new and existing areal sampling methods through simulation. The package is thoroughly documented in several vignettes as mentioned below. This document is meant to point you in the right direction in finding the needed information to get started using sampSurf.

Native American Entrepreneurship. Digest.

ERIC Educational Resources Information Center

Seymour, Nicole

Although Native Americans have owned and started the fewest small businesses of all U.S. minority groups, entrepreneurship is considered to be an efficient tool for alleviating their economic problems. Barriers to Native American entrepreneurship include poverty, scarce start-up capital, poor access to business education and technical assistance,…

The inverse-square law and quantum gravity

NASA Technical Reports Server (NTRS)

Nieto, Michael Martin; Goldman, T.; Hughes, Richard J.

1989-01-01

A program is described which measures the gravitational acceleration of antiprotons. This idea was approached from a particle physics point of view. That point of view is examined starting with some history of physics over the last 200 years.

41 CFR 301-11.9 - When does per diem or actual expense entitlement start/stop?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ALLOWABLE TRAVEL EXPENSES 11-PER... authorized point and ends on the day you return to your home, office or other authorized point. ...

Black start research of the wind and storage system based on the dual master-slave control

NASA Astrophysics Data System (ADS)

Leng, Xue; Shen, Li; Hu, Tian; Liu, Li

2018-02-01

Black start is the key to solving the problem of large-scale power failure, while the introduction of new renewable clean energy as a black start power supply was a new hotspot. Based on the dual master-slave control strategy, the wind and storage system was taken as the black start reliable power, energy storage and wind combined to ensure the stability of the micorgrid systems, to realize the black start. In order to obtain the capacity ratio of the storage in the small system based on the dual master-slave control strategy, and the black start constraint condition of the wind and storage combined system, obtain the key points of black start of wind storage combined system, but also provide reference and guidance for the subsequent large-scale wind and storage combined system in black start projects.

ROBIL - Robot Israel

DTIC Science & Technology

2013-07-31

pedals and releasing the hand brake ), the ROS ’actionlib’ is started. Atlas starts driving to the received way points until it reaches the last gate...grip at angle 0………………………………………………………………… ..31 FIGURE 3.5.6: MATLAB ’Steering wheel angle ’ output membership function schematic……………...……31...repeatability of the motion sequence. We added an optional motion to press the gas pedal at the end of the sequence in order to secure additional points

75 FR 33565 - Notice of Intent To Prepare an Environmental Impact Statement for New Medium- and Heavy-Duty Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

...- and Heavy-Duty Fuel Efficiency Improvement Program AGENCY: National Highway Traffic Safety... efficiency improvement program for commercial medium- and heavy-duty on-highway vehicles and work trucks... efficiency standards starting with model year (MY) 2016 commercial medium- and heavy-duty on-highway vehicles...

Multi-scale characterization of the energy landscape of proteins with application to the C3D/Efb-C complex.

PubMed

Haspel, Nurit; Geisbrecht, Brian V; Lambris, John; Kavraki, Lydia

2010-03-01

We present a novel multi-level methodology to explore and characterize the low energy landscape and the thermodynamics of proteins. Traditional conformational search methods typically explore only a small portion of the conformational space of proteins and are hard to apply to large proteins due to the large amount of calculations required. In our multi-scale approach, we first provide an initial characterization of the equilibrium state ensemble of a protein using an efficient computational conformational sampling method. We then enrich the obtained ensemble by performing short Molecular Dynamics (MD) simulations on selected conformations from the ensembles as starting points. To facilitate the analysis of the results, we project the resulting conformations on a low-dimensional landscape to efficiently focus on important interactions and examine low energy regions. This methodology provides a more extensive sampling of the low energy landscape than an MD simulation starting from a single crystal structure as it explores multiple trajectories of the protein. This enables us to obtain a broader view of the dynamics of proteins and it can help in understanding complex binding, improving docking results and more. In this work, we apply the methodology to provide an extensive characterization of the bound complexes of the C3d fragment of human Complement component C3 and one of its powerful bacterial inhibitors, the inhibitory domain of Staphylococcus aureus extra-cellular fibrinogen-binding domain (Efb-C) and two of its mutants. We characterize several important interactions along the binding interface and define low free energy regions in the three complexes. Proteins 2010. (c) 2009 Wiley-Liss, Inc.

Strategies for merging microbial fuel cell technologies in water desalination processes: Start-up protocol and desalination efficiency assessment

NASA Astrophysics Data System (ADS)

Borjas, Zulema; Esteve-Núñez, Abraham; Ortiz, Juan Manuel

2017-07-01

Microbial Desalination Cells constitute an innovative technology where microbial fuel cell and electrodialysis merge in the same device for obtaining fresh water from saline water with no energy-associated cost for the user. In this work, an anodic biofilm of the electroactive bacteria Geobacter sulfurreducens was able to efficiently convert the acetate present in synthetic waste water into electric current (j = 0.32 mA cm-2) able to desalinate water. .Moreover, we implemented an efficient start-up protocol where desalination up to 90% occurred in a desalination cycle (water production:0.308 L m-2 h-1, initial salinity: 9 mS cm-1, final salinity: <1 mS cm-1) using a filter press-based MDC prototype without any energy supply (excluding peristaltic pump energy). This start-up protocol is not only optimized for time but also simplifies operational procedures making it a more feasible strategy for future scaling-up of MDCs either as a single process or as a pre-treatment method combined with other well established desalination technologies such as reverse osmosis (RO) or reverse electrodialysis.

Avoiding Terminations, Single Offer Competition, and Costly Change Orders with Fixed-Price Contracts

DTIC Science & Technology

2015-04-30

deriving performance outputs from FPDS.6 To ensure reproducibility of this analysis and to provide a starting point for future research, the entirety...available in bulk from USAspending.gov starting in FY2000. However, data quality steadily improves over that decade, particularly in the commonly...available prior to FY2007, the study team chose to set FY2007 as the start date rather than risk sample bias by including only those earlier

Us in a Bus: A Transportation Manual for Head Start Programs.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA.

The purpose of this manual is to provide Head Start directors, transportation supervisors, and trainers with information and activities that will help develop, enhance, and maintain a safe and efficient transportation system for their programs. Contents are organized into three categories: safety procedures, planning a transportation system, and…

An Efficient Algorithm for Perturbed Orbit Integration Combining Analytical Continuation and Modified Chebyshev Picard Iteration

NASA Astrophysics Data System (ADS)

Elgohary, T.; Kim, D.; Turner, J.; Junkins, J.

2014-09-01

Several methods exist for integrating the motion in high order gravity fields. Some recent methods use an approximate starting orbit, and an efficient method is needed for generating warm starts that account for specific low order gravity approximations. By introducing two scalar Lagrange-like invariants and employing Leibniz product rule, the perturbed motion is integrated by a novel recursive formulation. The Lagrange-like invariants allow exact arbitrary order time derivatives. Restricting attention to the perturbations due to the zonal harmonics J2 through J6, we illustrate an idea. The recursively generated vector-valued time derivatives for the trajectory are used to develop a continuation series-based solution for propagating position and velocity. Numerical comparisons indicate performance improvements of ~ 70X over existing explicit Runge-Kutta methods while maintaining mm accuracy for the orbit predictions. The Modified Chebyshev Picard Iteration (MCPI) is an iterative path approximation method to solve nonlinear ordinary differential equations. The MCPI utilizes Picard iteration with orthogonal Chebyshev polynomial basis functions to recursively update the states. The key advantages of the MCPI are as follows: 1) Large segments of a trajectory can be approximated by evaluating the forcing function at multiple nodes along the current approximation during each iteration. 2) It can readily handle general gravity perturbations as well as non-conservative forces. 3) Parallel applications are possible. The Picard sequence converges to the solution over large time intervals when the forces are continuous and differentiable. According to the accuracy of the starting solutions, however, the MCPI may require significant number of iterations and function evaluations compared to other integrators. In this work, we provide an efficient methodology to establish good starting solutions from the continuation series method; this warm start improves the performance of the MCPI significantly and will likely be useful for other applications where efficiently computed approximate orbit solutions are needed.

Impact of lean six sigma process improvement methodology on cardiac catheterization laboratory efficiency.

PubMed

Agarwal, Shikhar; Gallo, Justin J; Parashar, Akhil; Agarwal, Kanika K; Ellis, Stephen G; Khot, Umesh N; Spooner, Robin; Murat Tuzcu, Emin; Kapadia, Samir R

2016-03-01

Operational inefficiencies are ubiquitous in several healthcare processes. To improve the operational efficiency of our catheterization laboratory (Cath Lab), we implemented a lean six sigma process improvement initiative, starting in June 2010. We aimed to study the impact of lean six sigma implementation on improving the efficiency and the patient throughput in our Cath Lab. All elective and urgent cardiac catheterization procedures including diagnostic coronary angiography, percutaneous coronary interventions, structural interventions and peripheral interventions performed between June 2009 and December 2012 were included in the study. Performance metrics utilized for analysis included turn-time, physician downtime, on-time patient arrival, on-time physician arrival, on-time start and manual sheath-pulls inside the Cath Lab. After implementation of lean six sigma in the Cath Lab, we observed a significant improvement in turn-time, physician downtime, on-time patient arrival, on-time physician arrival, on-time start as well as sheath-pulls inside the Cath Lab. The percentage of cases with optimal turn-time increased from 43.6% in 2009 to 56.6% in 2012 (p-trend<0.001). Similarly, the percentage of cases with an aggregate on-time start increased from 41.7% in 2009 to 62.8% in 2012 (p-trend<0.001). In addition, the percentage of manual sheath-pulls performed in the Cath Lab decreased from 60.7% in 2009 to 22.7% in 2012 (p-trend<0.001). The current longitudinal study illustrates the impact of successful implementation of a well-known process improvement initiative, lean six sigma, on improving and sustaining efficiency of our Cath Lab operation. After the successful implementation of this continuous quality improvement initiative, there was a significant improvement in the selected performance metrics namely turn-time, physician downtime, on-time patient arrival, on-time physician arrival, on-time start as well as sheath-pulls inside the Cath Lab. Copyright © 2016 Elsevier Inc. All rights reserved.

Floating-point performance of ARM cores and their efficiency in classical molecular dynamics

NASA Astrophysics Data System (ADS)

Nikolskiy, V.; Stegailov, V.

2016-02-01

Supercomputing of the exascale era is going to be inevitably limited by power efficiency. Nowadays different possible variants of CPU architectures are considered. Recently the development of ARM processors has come to the point when their floating point performance can be seriously considered for a range of scientific applications. In this work we present the analysis of the floating point performance of the latest ARM cores and their efficiency for the algorithms of classical molecular dynamics.

Identifying Nonprovider Factors Affecting Pediatric Emergency Medicine Provider Efficiency.

PubMed

Saleh, Fareed; Breslin, Kristen; Mullan, Paul C; Tillett, Zachary; Chamberlain, James M

2017-10-31

The aim of this study was to create a multivariable model of standardized relative value units per hour by adjusting for nonprovider factors that influence efficiency. We obtained productivity data based on billing records measured in emergency relative value units for (1) both evaluation and management of visits and (2) procedures for 16 pediatric emergency medicine providers with more than 750 hours worked per year. Eligible shifts were in an urban, academic pediatric emergency department (ED) with 2 sites: a tertiary care main campus and a satellite community site. We used multivariable linear regression to adjust for the impact of shift and pediatric ED characteristics on individual-provider efficiency and then removed variables from the model with minimal effect on productivity. There were 2998 eligible shifts for the 16 providers during a 3-year period. The resulting model included 4 variables when looking at both ED sites combined. These variables include the following: (1) number of procedures billed by provider, (2) season of the year, (3) shift start time, and (4) day of week. Results were improved when we separately modeled each ED location. A 3-variable model using procedures billed by provider, shift start time, and season explained 23% of the variation in provider efficiency at the academic ED site. A 3-variable model using procedures billed by provider, patient arrivals per hour, and shift start time explained 45% of the variation in provider efficiency at the satellite ED site. Several nonprovider factors affect provider efficiency. These factors should be considered when designing productivity-based incentives.

HIV treatment and care in resource-constrained environments: challenges for the next decade

PubMed Central

Eholié, Serge-Paul; Aoussi, François Eba; Ouattara, Ismael Songda; Bissagnéné, Emmanuel; Anglaret, Xavier

2012-01-01

Many successes have been achieved in HIV care in low- and middle-income countries (LMIC): increased number of HIV-infected individuals receiving antiretroviral treatment (ART), wide decentralization, reduction in morbidity and mortality and accessibility to cheapest drugs. However, these successes should not hide existing failures and difficulties. In this paper, we underline several key challenges. First, ensure long-term financing, increase available resources, in order to meet the increasing needs, and redistribute the overall budget in a concerted way amongst donors. Second, increase ART coverage and treat the many eligible patients who have not yet started ART. Competition amongst countries is expected to become a strong driving force in encouraging the least efficient to join better performing countries. Third, decrease early mortality on ART, by improving access to prevention, case-finding and treatment of tuberculosis and invasive bacterial diseases and by getting people to start ART much earlier. Fourth, move on from WHO 2006 to WHO 2010 guidelines. Raising the cut-off point for starting ART to 350 CD4/mm3 needs changing paradigm, adopting opt-out approach, facilitating pro-active testing, facilitating task shifting and increasing staff recruitments. Phasing out stavudine needs acting for a drastic reduction in the costs of other drugs. Scaling up routine viral load needs a mobilization for lower prices of reagents and equipments, as well as efforts in relation to point-of-care automation and to maintenance. The latter is a key step to boost the utilization of second-line regimens, which are currently dramatically under prescribed. Finally, other challenges are to reduce lost-to-follow-up rates; manage lifelong treatment and care for long-term morbidity, including drug toxicity, residual AIDS and HIV-non-AIDS morbidity and aging-related morbidity; and be able to face unforeseen events such as socio-political and military crisis. An old African proverb states that the growth of a deep-rooted tree cannot be stopped. Our tree is well rooted in existing field experience and is, therefore, expected to grow. In order for us to let it grow, long-term cost-effectiveness approach and life-saving evidence-based programming should replace short-term budgeting approach. PMID:22944479

Determination of efficiency of an aged HPGe detector for gaseous sources by self absorption correction and point source methods

NASA Astrophysics Data System (ADS)

Sarangapani, R.; Jose, M. T.; Srinivasan, T. K.; Venkatraman, B.

2017-07-01

Methods for the determination of efficiency of an aged high purity germanium (HPGe) detector for gaseous sources have been presented in the paper. X-ray radiography of the detector has been performed to get detector dimensions for computational purposes. The dead layer thickness of HPGe detector has been ascertained from experiments and Monte Carlo computations. Experimental work with standard point and liquid sources in several cylindrical geometries has been undertaken for obtaining energy dependant efficiency. Monte Carlo simulations have been performed for computing efficiencies for point, liquid and gaseous sources. Self absorption correction factors have been obtained using mathematical equations for volume sources and MCNP simulations. Self-absorption correction and point source methods have been used to estimate the efficiency for gaseous sources. The efficiencies determined from the present work have been used to estimate activity of cover gas sample of a fast reactor.

Nanocrystalline ceramic materials

DOEpatents

Siegel, Richard W.; Nieman, G. William; Weertman, Julia R.

1994-01-01

A method for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material.

Transforming the structure of a health system.

PubMed

Reilly, Patrick

2012-06-01

In starting the planning process for an organization's transformation or restructuring, healthcare finance leaders should: Identify strategic imperatives for the organization and physicians, Remember the organization's core area of business, Define the starting point and create clear objectives, Develop a strategy that engages front-line employees to change the culture of the organization.

Formation and removal of PCDD/Fs in a municipal waste incinerator during different operating periods.

PubMed

Wang, Hou Chuan; Hwang, Jyh Feng; Chi, Kai Hsien; Chang, Moo Been

2007-04-01

The PCDD/F concentrations and removal efficiencies achieved with air pollution control devices (APCDs) during different operating periods (start-up, normal operation, and shut-down) at an existing municipal waste incinerator (MWI) in Taiwan are evaluated via stack sampling and analysis. The MWI investigated is equipped with electrostatic precipitators (EP), wet scrubbers (WS), and selective catalytic reduction system (SCR) as APCDs. The sampling results indicate that the PCDD/F concentrations at the EP inlet during start-up period were 15 times higher than that measured during normal operation period. The PCDD/F concentration observed at shut-down period was close to that measured at normal operation period. The CO concentration was between 400 and 1000 ppm during start-up period, which was about 50 times higher compared with the normal operation. Hence, combustion condition significantly affected the PCDD/F formation concentration during the waste incineration process. In addition, the distributions of the PCDD/F congeners were similar at different operating periods. During the normal operation and shut-down periods, the EP decreases the PCDD/F concentration (based on TEQ) by 18.4-48.6%, while the removal efficiency of PCDD/Fs achieved with SCR system reaches 99.3-99.6%. Nevertheless, the PCDD/F removal efficiency achieved with SCR was only 42% during the 19-h start-up period due to the low SCR operating temperature (195 degrees C).

Creating three-dimensional tooth models from tomographic images.

PubMed

Lima da Silva, Isaac Newton; Barbosa, Gustavo Frainer; Soares, Rodrigo Borowski Grecco; Beltrao, Maria Cecilia Gomes; Spohr, Ana Maria; Mota, Eduardo Golcalves; Oshima, Hugo Mitsuo Silva; Burnett, Luiz Henrique

2008-01-01

The use of Finite Element Analysis (FEA) is becoming very frequent in Dentistry. However, most of the three-dimensional models presented by the literature for teeth are limited in terms of geometry. Discrepancy in shape and dimensions can cause wrong results to occur. Sharp cusps and faceted contour can produce stress concentrations, which are incoherent with the reality. The aim of this study was the processing of tomographic images in order to develop an advanced three-dimensional reconstruction of the anatomy of a molar tooth and the integration of the resulting solid with commercially available CAD/CAE software. Computed tomographic images were obtained from 0.5 mm thick slices of mandibular molar and transferred to commercial cad software. Once the point cloud data have been generated, the work on these points started to get to the solid model of the tooth with Pro/Engineer software. The obtained tooth model showed very accurate shape and dimensions, as it was obtained from real tooth data with error of 0.0 to -0.8 mm. The methodology presented was efficient for creating a biomodel of a tooth from tomographic images that realistically represented its anatomy.

Transfer of Wire Arc-Sprayed Metal Coatings onto Plastic Parts

NASA Astrophysics Data System (ADS)

Bobzin, K.; Öte, M.; Knoch, M. A.; Liao, X.; Hopmann, Ch.; Ochotta, P.

2018-01-01

By means of In-Mold-Metal-Spraying (IMMS), metal coatings deposited by means of arc spraying process (ASP) can be transferred onto plastic parts during injection molding, thus realizing an efficient production of metallized plastic parts. Parts produced by means of IMMS can be used in electrical applications. In the current study, the electrical resistivity of coatings applied with different feedstock materials was determined. As a starting point, pressurized air is used as atomizing gas for ASP. In contrast to Zn coatings, Cu coatings applied with pressurized air exhibit a significantly higher electrical resistivity in comparison with massive material. One possible reason is the more pronounced oxidation of Cu particles during ASP. Therefore, N2 and a mixture of N2 and H2 were used as atomizing gas. As a result, the electrical resistivity of coatings applied by means of IMMS could be significantly reduced. Furthermore, standoff distance, current and pressure of the atomizing gas were varied to investigate the influence of these process parameters on the electrical resistivity of Zn coatings using a full factorial experiment design with center point. It can be observed that the electrical resistivity of the Zn coatings increases with decreasing current and increasing standoff distance and pressure.

Transfer of Wire Arc-Sprayed Metal Coatings onto Plastic Parts

NASA Astrophysics Data System (ADS)

Bobzin, K.; Öte, M.; Knoch, M. A.; Liao, X.; Hopmann, Ch.; Ochotta, P.

2017-12-01

By means of In-Mold-Metal-Spraying (IMMS), metal coatings deposited by means of arc spraying process (ASP) can be transferred onto plastic parts during injection molding, thus realizing an efficient production of metallized plastic parts. Parts produced by means of IMMS can be used in electrical applications. In the current study, the electrical resistivity of coatings applied with different feedstock materials was determined. As a starting point, pressurized air is used as atomizing gas for ASP. In contrast to Zn coatings, Cu coatings applied with pressurized air exhibit a significantly higher electrical resistivity in comparison with massive material. One possible reason is the more pronounced oxidation of Cu particles during ASP. Therefore, N2 and a mixture of N2 and H2 were used as atomizing gas. As a result, the electrical resistivity of coatings applied by means of IMMS could be significantly reduced. Furthermore, standoff distance, current and pressure of the atomizing gas were varied to investigate the influence of these process parameters on the electrical resistivity of Zn coatings using a full factorial experiment design with center point. It can be observed that the electrical resistivity of the Zn coatings increases with decreasing current and increasing standoff distance and pressure.

Bioprospecting and evolving alternative xylose and arabinose pathway enzymes for use in Saccharomyces cerevisiae.

PubMed

Lee, Sun-Mi; Jellison, Taylor; Alper, Hal S

2016-03-01

Bioprospecting is an effective way to find novel enzymes from strains with desirable phenotypes. Such bioprospecting has enabled organisms such as Saccharomyces cerevisiae to utilize nonnative pentose sugars. Yet, the efficiency of this pentose catabolism (especially for the case of arabinose) remains suboptimal. Thus, further pathway optimization or identification of novel, optimal pathways is needed. Previously, we identified a novel set of xylan catabolic pathway enzymes from a superior pentose-utilizing strain of Ustilago bevomyces. These enzymes were used to successfully engineer a xylan-utilizing S. cerevisiae through a blended approach of bioprospecting and evolutionary engineering. Here, we expanded this approach to xylose and arabinose catabolic pathway engineering and demonstrated that bioprospected xylose and arabinose catabolic pathways from U. bevomyces offer alternative choices for enabling efficient pentose catabolism in S. cerevisiae. By introducing a novel set of xylose catabolic genes from U. bevomyces, growth rates were improved up to 85 % over a set of traditional Scheffersomyces stipitis pathway genes. In addition, we suggested an alternative arabinose catabolic pathway which, after directed evolution and pathway engineering, enabled S. cerevisiae to grow on arabinose as a sole carbon source in minimal medium with growth rates upwards of 0.05 h(-1). This pathway represents the most efficient growth of yeast on pure arabinose minimal medium. These pathways provide great starting points for further strain development and demonstrate the utility of bioprospecting from U. bevomyces.

Interferometric study on the mass transfer in cryogenic distillation under magnetic field

NASA Astrophysics Data System (ADS)

Bao, S. R.; Zhang, R. P.; Y Rong, Y.; Zhi, X. Q.; Qiu, L. M.

2017-12-01

Cryogenic distillation has long been used for the mass production of industrial gases because of its features of high efficiency, high purity, and capability to produce noble gases. It is of great theoretical and practical significance to explore methods to improve the mass transfer efficiency in cryogenic distillation. The negative correlation between the susceptibility of paramagnetic oxygen and temperature provides a new possibility of comprehensive utilization of boiling point and susceptibility differences in cryogenic distillation. Starting from this concept, we proposed a novel distillation intensifying method by using gradient magnetic field, in which the magnetic forces enhance the transport of the oxygen molecules to the liquid phase in the distillation. In this study, a cryogenic testbed was designed and fabricated to study the diffusion between oxygen and nitrogen under magnetic field. A Mach-Zehnder interferometer was used to visualize the concentration distribution during the diffusion process. The mass transfer characteristics with and without magnetic field, in the chamber filled with the magnetized medium, were systematically studied. The concentration redistribution of oxygen was observed, and the stable stratified diffusion between liquid oxygen and nitrogen was prolonged by the non-uniform magnetic field. The experimental results show that the magnetic field can efficiently influence the mass transfer in cryogenic distillation, which can provide a new mechanism for the optimization of air separation process.

Efficient modulation of γ-aminobutyric acid type A receptors by piperine derivatives.

PubMed

Schöffmann, Angela; Wimmer, Laurin; Goldmann, Daria; Khom, Sophia; Hintersteiner, Juliane; Baburin, Igor; Schwarz, Thomas; Hintersteininger, Michael; Pakfeifer, Peter; Oufir, Mouhssin; Hamburger, Matthias; Erker, Thomas; Ecker, Gerhard F; Mihovilovic, Marko D; Hering, Steffen

2014-07-10

Piperine activates TRPV1 (transient receptor potential vanilloid type 1 receptor) receptors and modulates γ-aminobutyric acid type A receptors (GABAAR). We have synthesized a library of 76 piperine analogues and analyzed their effects on GABAAR by means of a two-microelectrode voltage-clamp technique. GABAAR were expressed in Xenopus laevis oocytes. Structure-activity relationships (SARs) were established to identify structural elements essential for efficiency and potency. Efficiency of piperine derivatives was significantly increased by exchanging the piperidine moiety with either N,N-dipropyl, N,N-diisopropyl, N,N-dibutyl, p-methylpiperidine, or N,N-bis(trifluoroethyl) groups. Potency was enhanced by replacing the piperidine moiety by N,N-dibutyl, N,N-diisobutyl, or N,N-bistrifluoroethyl groups. Linker modifications did not substantially enhance the effect on GABAAR. Compound 23 [(2E,4E)-5-(1,3-benzodioxol-5-yl)-N,N-dipropyl-2,4-pentadienamide] induced the strongest modulation of GABAA (maximal GABA-induced chloride current modulation (IGABA-max = 1673% ± 146%, EC50 = 51.7 ± 9.5 μM), while 25 [(2E,4E)-5-(1,3-benzodioxol-5-yl)-N,N-dibutyl-2,4-pentadienamide] displayed the highest potency (EC50 = 13.8 ± 1.8 μM, IGABA-max = 760% ± 47%). Compound 23 induced significantly stronger anxiolysis in mice than piperine and thus may serve as a starting point for developing novel GABAAR modulators.

Efficient Modulation of γ-Aminobutyric Acid Type A Receptors by Piperine Derivatives

PubMed Central

2014-01-01

Piperine activates TRPV1 (transient receptor potential vanilloid type 1 receptor) receptors and modulates γ-aminobutyric acid type A receptors (GABAAR). We have synthesized a library of 76 piperine analogues and analyzed their effects on GABAAR by means of a two-microelectrode voltage-clamp technique. GABAAR were expressed in Xenopus laevis oocytes. Structure–activity relationships (SARs) were established to identify structural elements essential for efficiency and potency. Efficiency of piperine derivatives was significantly increased by exchanging the piperidine moiety with either N,N-dipropyl, N,N-diisopropyl, N,N-dibutyl, p-methylpiperidine, or N,N-bis(trifluoroethyl) groups. Potency was enhanced by replacing the piperidine moiety by N,N-dibutyl, N,N-diisobutyl, or N,N-bistrifluoroethyl groups. Linker modifications did not substantially enhance the effect on GABAAR. Compound 23 [(2E,4E)-5-(1,3-benzodioxol-5-yl)-N,N-dipropyl-2,4-pentadienamide] induced the strongest modulation of GABAA (maximal GABA-induced chloride current modulation (IGABA-max = 1673% ± 146%, EC50 = 51.7 ± 9.5 μM), while 25 [(2E,4E)-5-(1,3-benzodioxol-5-yl)-N,N-dibutyl-2,4-pentadienamide] displayed the highest potency (EC50 = 13.8 ± 1.8 μM, IGABA-max = 760% ± 47%). Compound 23 induced significantly stronger anxiolysis in mice than piperine and thus may serve as a starting point for developing novel GABAAR modulators. PMID:24905252

Image-based path planning for automated virtual colonoscopy navigation

NASA Astrophysics Data System (ADS)

Hong, Wei

2008-03-01

Virtual colonoscopy (VC) is a noninvasive method for colonic polyp screening, by reconstructing three-dimensional models of the colon using computerized tomography (CT). In virtual colonoscopy fly-through navigation, it is crucial to generate an optimal camera path for efficient clinical examination. In conventional methods, the centerline of the colon lumen is usually used as the camera path. In order to extract colon centerline, some time consuming pre-processing algorithms must be performed before the fly-through navigation, such as colon segmentation, distance transformation, or topological thinning. In this paper, we present an efficient image-based path planning algorithm for automated virtual colonoscopy fly-through navigation without the requirement of any pre-processing. Our algorithm only needs the physician to provide a seed point as the starting camera position using 2D axial CT images. A wide angle fisheye camera model is used to generate a depth image from the current camera position. Two types of navigational landmarks, safe regions and target regions are extracted from the depth images. Camera position and its corresponding view direction are then determined using these landmarks. The experimental results show that the generated paths are accurate and increase the user comfort during the fly-through navigation. Moreover, because of the efficiency of our path planning algorithm and rendering algorithm, our VC fly-through navigation system can still guarantee 30 FPS.

[Fragment-based drug discovery: concept and aim].

PubMed

Tanaka, Daisuke

2010-03-01

Fragment-Based Drug Discovery (FBDD) has been recognized as a newly emerging lead discovery methodology that involves biophysical fragment screening and chemistry-driven fragment-to-lead stages. Although fragments, defined as structurally simple and small compounds (typically <300 Da), have not been employed in conventional high-throughput screening (HTS), the recent significant progress in the biophysical screening methods enables fragment screening at a practical level. The intention of FBDD primarily turns our attention to weakly but specifically binding fragments (hit fragments) as the starting point of medicinal chemistry. Hit fragments are then promoted to more potent lead compounds through linking or merging with another hit fragment and/or attaching functional groups. Another positive aspect of FBDD is ligand efficiency. Ligand efficiency is a useful guide in screening hit selection and hit-to-lead phases to achieve lead-likeness. Owing to these features, a number of successful applications of FBDD to "undruggable targets" (where HTS and other lead identification methods failed to identify useful lead compounds) have been reported. As a result, FBDD is now expected to complement more conventional methodologies. This review, as an introduction of the following articles, will summarize the fundamental concepts of FBDD and will discuss its advantages over other conventional drug discovery approaches.

A millimeter wave relativistic backward wave oscillator operating in TM{sub 03} mode with low guiding magnetic field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ye, Hu; Wu, Ping; Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an Shaanxi 710024

2015-06-15

A V-band overmoded relativistic backward wave oscillator (RBWO) guided by low magnetic field and operating on a TM{sub 03} mode is presented to increase both the power handling capacity and the wave-beam interaction conversion efficiency. Trapezoidal slow wave structures (SWSs) with shallow corrugations and long periods are adopted to make the group velocity of TM{sub 03} mode at the intersection point close to zero. The coupling impedance and diffraction Q-factor of the RBWO increase, while the starting current decreases owing to the reduction of the group velocity of TM{sub 03} mode. In addition, the TM{sub 03} mode dominates over themore » other modes in the startup of the oscillation. Via numerical simulation, the generation of the microwave pulse with an output power of 425 MW and a conversion efficiency of 32% are achieved at 60.5 GHz with an external magnetic field of 1.25 T. This RBWO can provide greater power handling capacity when operating on the TM{sub 03} mode than on the TM{sub 01} mode.« less

Context-dependent player's movement interpretation: application to adaptive game development

NASA Astrophysics Data System (ADS)

Picard, Francois; Estraillier, Pascal

2010-02-01

Video games are more and more controlled by the real movements of the player. However, the player is constrained by the system devices, imposing a limited vocabulary of actions associated with a set of unnatural movements. To introduce more entertaining video games to players, a component-based architecture is proposed. It has been acknowledged as the starting point for the development of adaptive applications based on the hypothesis of a high level dialogue between the system and the player. The system adaptability relies on interpretation mechanisms of the player behaviors. These behaviors are defined through the representation of the real movements of the player who freely interacts with the 3D elements composing an immersive virtual environment, following a given game scenario. The efficient interpretation of the player movements relies on the introduction in the system of the management of the scene's context. The contextual information not only helps to determine the true meaning of an observed behavior but also makes the system to adapt its processes regarding this interpretation, while managing its hardware and software resources efficiently. A commercial motion capture interface has been enhanced by the elaboration of such a system.

Effects of Gas Turbine Component Performance on Engine and Rotary Wing Vehicle Size and Performance

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.; Thurman, Douglas R.

2010-01-01

In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project, further gas turbine engine studies have been performed to quantify the effects of advanced gas turbine technologies on engine weight and fuel efficiency and the subsequent effects on a civilian rotary wing vehicle size and mission fuel. The Large Civil Tiltrotor (LCTR) vehicle and mission and a previous gas turbine engine study will be discussed as a starting point for this effort. Methodology used to assess effects of different compressor and turbine component performance on engine size, weight and fuel efficiency will be presented. A process to relate engine performance to overall LCTR vehicle size and fuel use will also be given. Technology assumptions and levels of performance used in this analysis for the compressor and turbine components performances will be discussed. Optimum cycles (in terms of power specific fuel consumption) will be determined with subsequent engine weight analysis. The combination of engine weight and specific fuel consumption will be used to estimate their effect on the overall LCTR vehicle size and mission fuel usage. All results will be summarized to help suggest which component performance areas have the most effect on the overall mission.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Assessing the impact of energy efficiency technologies at a district or city scale is of great interest to local governments, real estate developers, utility companies, and policymakers. This paper describes a flexible framework that can be used to create and run district and city scale building energy simulations. The framework is built around the new OpenStudio City Database (CityDB). Building footprints, building height, building type, and other data can be imported from public records or other sources. Missing data can be inferred or assigned from a statistical sampling of other datasets. Once all required data is available, OpenStudio Measures aremore » used to create starting point energy models and to model energy efficiency measures for each building. Together this framework allows a user to pose several scenarios such as 'what if 30% of the commercial retail buildings added rooftop solar' or 'what if all elementary schools converted to ground source heat pumps' and then visualize the impacts at a district or city scale. This paper focuses on modeling existing building stock using public records. However, the framework is capable of supporting the evaluation of new construction, district systems, and the use of proprietary data sources.« less

Protection, Profit, or Privacy: Exploring Strategic Solutions for Integrating Unmanned Aerial Systems (UAS) and the Delicate Balance Between Commercial Opportunity and Public Safety

DTIC Science & Technology

2016-12-01

United States v. Knotts.9 Analysis of previous cases provides a starting point for discussion between government officials and the public they...authorized under this ordinance to deploy this technology. At the start of the legislative session in the fall of 2015, Senator John Kavanagh, a...2015, through April 30, 2016 (a span of approximately 15 months). The start date of this query is intended to correspond with the operational

Recommendations and Privacy Requirements for a Bring-Your-Own-Device User Policy and Agreement

DTIC Science & Technology

2015-03-01

manipulate data from non-traditional workplaces to support mission requirements. The United States Marine Corps (USMC) has started a pilot BYOD program, but...contrasted to obtain a starting point to develop a user agreement for the USMC. The security controls identified within these case studies were also...participating in a BYOD program. A. MARINE CORPS PILOT PROGRAM Starting in January 2015 and at the behest of the USMC, the Marine Corps Network Operations and

Up to what point is loss reduction environmentally friendly?: The LCA of loss reduction scenarios in drinking water networks.

PubMed

Pillot, Julie; Catel, Laureline; Renaud, Eddy; Augeard, Bénédicte; Roux, Philippe

2016-11-01

In a context of increasing water shortage all over the world, water utilities must minimise losses in their distribution networks and draw up water loss reduction action plans. While leak reduction is clearly an important part of sustainable water management, its impacts have to be reconsidered in a broader objective of environmental protection than strictly the avoided losses in cubic metres of water. Reducing the volume of water abstracted reduces also environmental impacts associated to water production (the operation and infrastructure needed for abstraction, treatment, supply). In the mean time, activities for reducing water losses generate their own environmental impacts, notably as a result of the work, equipment, and infrastructures used for this purpose. In this study, Life Cycle Assessment (LCA) was used to assess and compare two sets of environmental impacts: those resulting from the production and supply of water which will never reach subscribers, and those caused by water loss reduction activities. This information can then be used to establish whether or not there is a point beyond which loss reduction is no longer effective in reducing the environmental impacts of drinking water supply. Results show that the improvement actions that start from a low water supply efficiency are clearly beneficial for ecosystems, human health and preservation of resources. When seeking to improve the efficiency beyond certain values (about 65%), the uncertainty makes it impossible to conclude for an environmental benefit on all impact categories. Copyright © 2016 Elsevier Ltd. All rights reserved.

Combined metabolic engineering of precursor and co-factor supply to increase α-santalene production by Saccharomyces cerevisiae

PubMed Central

2012-01-01

Background Sesquiterpenes are a class of natural products with a diverse range of attractive industrial proprieties. Due to economic difficulties of sesquiterpene production via extraction from plants or chemical synthesis there is interest in developing alternative and cost efficient bioprocesses. The hydrocarbon α-santalene is a precursor of sesquiterpenes with relevant commercial applications. Here, we construct an efficient Saccharomyces cerevisiae cell factory for α-santalene production. Results A multistep metabolic engineering strategy targeted to increase precursor and cofactor supply was employed to manipulate the yeast metabolic network in order to redirect carbon toward the desired product. To do so, genetic modifications were introduced acting to optimize the farnesyl diphosphate branch point, modulate the mevalonate pathway, modify the ammonium assimilation pathway and enhance the activity of a transcriptional activator. The approach employed resulted in an overall α-santalene yield of a 0.0052 Cmmol (Cmmol glucose)-1 corresponding to a 4-fold improvement over the reference strain. This strategy, combined with a specifically developed continuous fermentation process, led to a final α-santalene productivity of 0.036 Cmmol (g biomass)-1 h-1. Conclusions The results reported in this work illustrate how the combination of a metabolic engineering strategy with fermentation technology optimization can be used to obtain significant amounts of the high-value sesquiterpene α-santalene. This represents a starting point toward the construction of a yeast “sesquiterpene factory” and for the development of an economically viable bio-based process that has the potential to replace the current production methods. PMID:22938570

Multiple Revolution Solutions for the Perturbed Lambert Problem using the Method of Particular Solutions and Picard Iteration

NASA Astrophysics Data System (ADS)

Woollands, Robyn M.; Read, Julie L.; Probe, Austin B.; Junkins, John L.

2017-12-01

We present a new method for solving the multiple revolution perturbed Lambert problem using the method of particular solutions and modified Chebyshev-Picard iteration. The method of particular solutions differs from the well-known Newton-shooting method in that integration of the state transition matrix (36 additional differential equations) is not required, and instead it makes use of a reference trajectory and a set of n particular solutions. Any numerical integrator can be used for solving two-point boundary problems with the method of particular solutions, however we show that using modified Chebyshev-Picard iteration affords an avenue for increased efficiency that is not available with other step-by-step integrators. We take advantage of the path approximation nature of modified Chebyshev-Picard iteration (nodes iteratively converge to fixed points in space) and utilize a variable fidelity force model for propagating the reference trajectory. Remarkably, we demonstrate that computing the particular solutions with only low fidelity function evaluations greatly increases the efficiency of the algorithm while maintaining machine precision accuracy. Our study reveals that solving the perturbed Lambert's problem using the method of particular solutions with modified Chebyshev-Picard iteration is about an order of magnitude faster compared with the classical shooting method and a tenth-twelfth order Runge-Kutta integrator. It is well known that the solution to Lambert's problem over multiple revolutions is not unique and to ensure that all possible solutions are considered we make use of a reliable preexisting Keplerian Lambert solver to warm start our perturbed algorithm.

Robust and efficient overset grid assembly for partitioned unstructured meshes

NASA Astrophysics Data System (ADS)

Roget, Beatrice; Sitaraman, Jayanarayanan

2014-03-01

This paper presents a method to perform efficient and automated Overset Grid Assembly (OGA) on a system of overlapping unstructured meshes in a parallel computing environment where all meshes are partitioned into multiple mesh-blocks and processed on multiple cores. The main task of the overset grid assembler is to identify, in parallel, among all points in the overlapping mesh system, at which points the flow solution should be computed (field points), interpolated (receptor points), or ignored (hole points). Point containment search or donor search, an algorithm to efficiently determine the cell that contains a given point, is the core procedure necessary for accomplishing this task. Donor search is particularly challenging for partitioned unstructured meshes because of the complex irregular boundaries that are often created during partitioning.

Strehl ratio: a tool for optimizing optical nulls and singularities.

PubMed

Hénault, François

2015-07-01

In this paper a set of radial and azimuthal phase functions are reviewed that have a null Strehl ratio, which is equivalent to generating a central extinction in the image plane of an optical system. The study is conducted in the framework of Fraunhofer scalar diffraction, and is oriented toward practical cases where optical nulls or singularities are produced by deformable mirrors or phase plates. The identified solutions reveal unexpected links with the zeros of type-J Bessel functions of integer order. They include linear azimuthal phase ramps giving birth to an optical vortex, azimuthally modulated phase functions, and circular phase gratings (CPGs). It is found in particular that the CPG radiometric efficiency could be significantly improved by the null Strehl ratio condition. Simple design rules for rescaling and combining the different phase functions are also defined. Finally, the described analytical solutions could also serve as starting points for an automated searching software tool.

Devolution and health in the UK: policy and its lessons since 1998.

PubMed

Greer, Scott L

2016-06-01

Since devolution in 1998, the UK has had four increasingly distinct health systems, in England, Northern Ireland, Scotland and Wales. Secondary literature and authors' own research since 1998. From a similar starting point, there has been a considerable distancing of the four health systems from each other in policies, priorities and organization. The comparative efficiency and quality of the different systems as well as the wisdom of their greater or lesser reliance on integration and competition. Better and more comparable public data would be useful, as would consideration of potential devolved lessons for UK policy. Comparisons of organization and performance at levels more detailed than whole systems; analysis of the resilience and management of different systems in a context of budgetary austerity; analysis of the politics behind policy decisions. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A globally convergent LCL method for nonlinear optimization.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedlander, M. P.; Saunders, M. A.; Mathematics and Computer Science

2005-01-01

For optimization problems with nonlinear constraints, linearly constrained Lagrangian (LCL) methods solve a sequence of subproblems of the form 'minimize an augmented Lagrangian function subject to linearized constraints.' Such methods converge rapidly near a solution but may not be reliable from arbitrary starting points. Nevertheless, the well-known software package MINOS has proved effective on many large problems. Its success motivates us to derive a related LCL algorithm that possesses three important properties: it is globally convergent, the subproblem constraints are always feasible, and the subproblems may be solved inexactly. The new algorithm has been implemented in Matlab, with an optionmore » to use either MINOS or SNOPT (Fortran codes) to solve the linearly constrained subproblems. Only first derivatives are required. We present numerical results on a subset of the COPS, HS, and CUTE test problems, which include many large examples. The results demonstrate the robustness and efficiency of the stabilized LCL procedure.« less

Delineating Hydrofacies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Xuehang; Chen, Xingyuan; Ye, Ming

2015-07-01

This study develops a new framework of facies-based data assimilation for characterizing spatial distribution of hydrofacies and estimating their associated hydraulic properties. This framework couples ensemble data assimilation with transition probability-based geostatistical model via a parameterization based on a level set function. The nature of ensemble data assimilation makes the framework efficient and flexible to be integrated with various types of observation data. The transition probability-based geostatistical model keeps the updated hydrofacies distributions under geological constrains. The framework is illustrated by using a two-dimensional synthetic study that estimates hydrofacies spatial distribution and permeability in each hydrofacies from transient head data.more » Our results show that the proposed framework can characterize hydrofacies distribution and associated permeability with adequate accuracy even with limited direct measurements of hydrofacies. Our study provides a promising starting point for hydrofacies delineation in complex real problems.« less

Simple model of hydrophobic hydration.

PubMed

Lukšič, Miha; Urbic, Tomaz; Hribar-Lee, Barbara; Dill, Ken A

2012-05-31

Water is an unusual liquid in its solvation properties. Here, we model the process of transferring a nonpolar solute into water. Our goal was to capture the physical balance between water's hydrogen bonding and van der Waals interactions in a model that is simple enough to be nearly analytical and not heavily computational. We develop a 2-dimensional Mercedes-Benz-like model of water with which we compute the free energy, enthalpy, entropy, and the heat capacity of transfer as a function of temperature, pressure, and solute size. As validation, we find that this model gives the same trends as Monte Carlo simulations of the underlying 2D model and gives qualitative agreement with experiments. The advantages of this model are that it gives simple insights and that computational time is negligible. It may provide a useful starting point for developing more efficient and more realistic 3D models of aqueous solvation.

Aerosol Modeling for the Global Model Initiative

NASA Technical Reports Server (NTRS)

Weisenstein, Debra K.; Ko, Malcolm K. W.

2001-01-01

The goal of this project is to develop an aerosol module to be used within the framework of the Global Modeling Initiative (GMI). The model development work will be preformed jointly by the University of Michigan and AER, using existing aerosol models at the two institutions as starting points. The GMI aerosol model will be tested, evaluated against observations, and then applied to assessment of the effects of aircraft sulfur emissions as needed by the NASA Subsonic Assessment in 2001. The work includes the following tasks: 1. Implementation of the sulfur cycle within GMI, including sources, sinks, and aqueous conversion of sulfur. Aerosol modules will be added as they are developed and the GMI schedule permits. 2. Addition of aerosol types other than sulfate particles, including dust, soot, organic carbon, and black carbon. 3. Development of new and more efficient parameterizations for treating sulfate aerosol nucleation, condensation, and coagulation among different particle sizes and types.

A first insight on the biodegradation of limestone: the case of the World Heritage Convent of Christ

NASA Astrophysics Data System (ADS)

Rosado, Tânia; Silva, Mara; Galvão, Andreia; Mirão, José; Candeias, António; Caldeira, Ana Teresa

2016-12-01

The present study is a multidisciplinary approach applied to architectural stone materials of the Convent of Christ in Tomar (Portugal) in order to understand and mitigate the active decay processes. The structure and appearance of the stonework from the Convent of Christ are strongly affected by stains, biofilms and structural degradation. To investigate these phenomena, a multianalytical approach comprising X-ray microdiffraction, scanning electron microscopy, microRaman and microinfrared spectroscopy was applied to the examination of altered outdoor stone areas being detected calcium oxalates, carotenoids and microbial proliferation. The presence of these alteration products seems to be correlated with the microbial activity of bacteria, microalgae, cyanobacteria and filamentous fungi. This work showed that the application of complementary methodologies is an efficient strategy to characterise the stone decay, and constitute a starting point for successful conservation intervention plans that are urgent to ensure the preservation and safeguard of this emblematic monument.

Study of Two-Dimensional Compressible Non-Acoustic Modeling of Stirling Machine Type Components

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.; Ibrahim, Mounir B.

2001-01-01

A two-dimensional (2-D) computer code was developed for modeling enclosed volumes of gas with oscillating boundaries, such as Stirling machine components. An existing 2-D incompressible flow computer code, CAST, was used as the starting point for the project. CAST was modified to use the compressible non-acoustic Navier-Stokes equations to model an enclosed volume including an oscillating piston. The devices modeled have low Mach numbers and are sufficiently small that the time required for acoustics to propagate across them is negligible. Therefore, acoustics were excluded to enable more time efficient computation. Background information about the project is presented. The compressible non-acoustic flow assumptions are discussed. The governing equations used in the model are presented in transport equation format. A brief description is given of the numerical methods used. Comparisons of code predictions with experimental data are then discussed.

Efficient G0W0 using localized basis sets: a benchmark for molecules

NASA Astrophysics Data System (ADS)

Koval, Petr; Per Ljungberg, Mathias; Sanchez-Portal, Daniel

Electronic structure calculations within Hedin's GW approximation are becoming increasingly accessible to the community. In particular, as it has been shown earlier and we confirm by calculations using our MBPT_LCAO package, the computational cost of the so-called G0W0 can be made comparable to the cost of a regular Hartree-Fock calculation. In this work, we study the performance of our new implementation of G0W0 to reproduce the ionization potentials of all 117 closed-shell molecules belonging to the G2/97 test set, using a pseudo-potential starting point provided by the popular density-functional package SIESTA. Moreover, the ionization potentials and electron affinities of a set of 24 acceptor molecules are compared to experiment and to reference all-electron calculations. PK: Guipuzcoa Fellow; PK,ML,DSP: Deutsche Forschungsgemeinschaft (SFB1083); PK,DSP: MINECO MAT2013-46593-C6-2-P.

Thermodynamic analysis of low-temperature carbon dioxide and sulfur dioxide capture from coal-burning power plants.

PubMed

Swanson, Charles E; Elzey, John W; Hershberger, Robert E; Donnelly, Russell J; Pfotenhauer, John

2012-07-01

We discuss the possibility of capturing carbon dioxide from the flue gas of a coal-fired electrical power plant by cryogenically desublimating the carbon dioxide and then preparing it for transport in a pipeline to a sequestration site. Various other means have been proposed to accomplish the same goal. The problem discussed here is to estimate the "energy penalty" or "parasitic energy loss,' defined as the fraction of electrical output that will be needed to provide the refrigeration and that will then not be deliverable. We compute the energy loss (7.9-9.2% at 1 atm) based on perfect Carnot efficiency and estimate the achievable parasitic energy loss (22-26% at 1 atm) by incorporating the published coefficient of performance values for appropriately sized refrigeration or liquefaction cycles at the relevant temperatures. The analyses at 1 atm represent a starting point for future analyses using elevated pressures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klesmith, Justin R.; Bacik, John -Paul; Michalczyk, Ryszard

Synthetic metabolic pathways often suffer from low specific productivity, and new methods that quickly assess pathway functionality for many thousands of variants are urgently needed. Here we present an approach that enables the rapid and parallel determination of sequence effects on flux for complete gene-encoding sequences. We show that this method can be used to determine the effects of over 8000 single point mutants of a pyrolysis oil catabolic pathway implanted in Escherichia coli. Experimental sequence-function data sets predicted whether fitness-enhancing mutations to the enzyme levoglucosan kinase resulted from enhanced catalytic efficiency or enzyme stability. A structure of one designmore » incorporating 38 mutations elucidated the structural basis of high fitness mutations. One design incorporating 15 beneficial mutations supported a 15-fold improvement in growth rate and greater than 24-fold improvement in enzyme activity relative to the starting pathway. Lastly, this technique can be extended to improve a wide variety of designed pathways.« less

Grainsize evolution and differential comminution in an experimental regolith

NASA Technical Reports Server (NTRS)

Horz, F.; Cintala, M.; See, T.

1984-01-01

The comminution of planetary surfaces by exposure to continuous meteorite bombardment was simulated by impacting the same fragmental gabbro target 200 times. The role of comminution and in situ gardening of planetary regoliths was addressed. Mean grain size continuously decreased with increasing shot number. Initially it decreased linearly with accumulated energy, but at some stage comminution efficiency started to decrease gradually. Point counting techniques, aided by the electron microprobe for mineral identification, were performed on a number of comminution products. Bulk chemical analyses of specific grain size fractions were also carried out. The finest sizes ( 10 microns) display generally the strongest enrichment/depletion factors. Similar, if not exactly identical, trends are reported from lunar soils. It is, therefore, not necessarily correct to explain the chemical characteristics of various grain sizes via different admixtures of materials from distant source terrains. Differential comminution of local source rocks may be the dominating factor.

PubMed

Lohrmann, Dietrich

This paper emphasizes the great interest of the later Middle Ages in terms of burning mirrors, especially parabolic mirrors, which were considered as particularly efficient; the underlying theory was that of conic sections. This interest will be documented in the Appendix in the form of a short presentation of 29 treatises. The starting point is Paris BnF ms. lat. 9335, a collection of translations from the Arabic, copied in the early 13th century, which came into the possession of the Venetian physician and naturalist John Fontana (ca. 1395–1455). The optical part (Diokles, Apollonius, Alhazen) has been explained by him in a marginal note and a series of short definitions. These observations support the proposal by Horst Kranz, to change the date of an anonymous treatise on the construction of parabolic mirrors (Speculi almukefi compositio), previously dated by Marshall Clagett to the mid 14th century. We consider it now as a work of the famous Venetian naturalist John Fontana (ca 1430–1435).

Six elements of integrated primary healthcare.

PubMed

Brown, Lynsey J; Oliver-Baxter, Jodie

2016-03-01

Integrated care has the potential to deliver efficiencies and improvements in patient experiences and health outcomes. Efforts towards integrated care, especially at the primary and community health levels, have increasingly been under focus, both nationally and internationally. In Australia, regional integration is a priority, and integration of care is a task for meso-level organisations such as Primary Health Networks (PHNs). This paper seeks to provide a list of elements and questions for consideration by organisations working across primary healthcare settings, looking to enact and improve the delivery of integrated care. Six elements that consistently emerged during the development of a series of rapid reviews on integrated primary healthcare in Australia are presented in this paper. The elements identified are context, governance and leadership, infrastructure, financing, engagement, and communication. They offer a starting point for reflection in the planning and practices of organisations in their drive for continuous improvements in integrated care.

Thermodynamic analysis of low-temperature carbon dioxide and sulfur dioxide capture from coal-burning power plants

NASA Astrophysics Data System (ADS)

Swanson, Charles E.; Elzey, John W.; Hershberger, Robert E.; Donnelly, Russell J.; Pfotenhauer, John

2012-07-01

We discuss the possibility of capturing carbon dioxide from the flue gas of a coal-fired electrical power plant by cryogenically desublimating the carbon dioxide and then preparing it for transport in a pipeline to a sequestration site. Various other means have been proposed to accomplish the same goal. The problem discussed here is to estimate the “energy penalty” or “parasitic energy loss,' defined as the fraction of electrical output that will be needed to provide the refrigeration and that will then not be deliverable. We compute the energy loss (7.9-9.2% at 1 atm) based on perfect Carnot efficiency and estimate the achievable parasitic energy loss (22-26% at 1 atm) by incorporating the published coefficient of performance values for appropriately sized refrigeration or liquefaction cycles at the relevant temperatures. The analyses at 1 atm represent a starting point for future analyses using elevated pressures.

Tapered fiber coupling of single photons emitted by a deterministically positioned single nitrogen vacancy center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebermeister, Lars, E-mail: lars.liebermeister@physik.uni-muenchen.de; Petersen, Fabian; Münchow, Asmus v.

2014-01-20

A diamond nano-crystal hosting a single nitrogen vacancy (NV) center is optically selected with a confocal scanning microscope and positioned deterministically onto the subwavelength-diameter waist of a tapered optical fiber (TOF) with the help of an atomic force microscope. Based on this nano-manipulation technique, we experimentally demonstrate the evanescent coupling of single fluorescence photons emitted by a single NV-center to the guided mode of the TOF. By comparing photon count rates of the fiber-guided and the free-space modes and with the help of numerical finite-difference time domain simulations, we determine a lower and upper bound for the coupling efficiency ofmore » (9.5 ± 0.6)% and (10.4 ± 0.7)%, respectively. Our results are a promising starting point for future integration of single photon sources into photonic quantum networks and applications in quantum information science.« less

Green's functions for analysis of dynamic response of wheel/rail to vertical excitation

NASA Astrophysics Data System (ADS)

Mazilu, Traian

2007-09-01

An analytical model to simulate wheel/rail interaction using the Green's functions method is proposed in this paper. The model consists of a moving wheel on a discretely supported rail. Particularly for this model of rail, the bending and the longitudinal displacement are coupled due to the rail pad and a complex model of the rail pad is adopted. An efficient method for solving a time-domain analysis for wheel/rail interaction is presented. The method is based on the properties of the rail's Green functions and starting to these functions, a track's Green matrix is assembled for the numerical simulations of wheel/rail response due to three kinds of vertical excitations: the steady-state interaction, the rail corrugation and the wheel flat. The study points to influence of the worn rail—rigid contact—on variation in the wheel/rail contact force. The concept of pinned-pinned inhibitive rail pad is also presented.

Computational approach to compact Riemann surfaces

NASA Astrophysics Data System (ADS)

Frauendiener, Jörg; Klein, Christian

2017-01-01

A purely numerical approach to compact Riemann surfaces starting from plane algebraic curves is presented. The critical points of the algebraic curve are computed via a two-dimensional Newton iteration. The starting values for this iteration are obtained from the resultants with respect to both coordinates of the algebraic curve and a suitable pairing of their zeros. A set of generators of the fundamental group for the complement of these critical points in the complex plane is constructed from circles around these points and connecting lines obtained from a minimal spanning tree. The monodromies are computed by solving the defining equation of the algebraic curve on collocation points along these contours and by analytically continuing the roots. The collocation points are chosen to correspond to Chebychev collocation points for an ensuing Clenshaw-Curtis integration of the holomorphic differentials which gives the periods of the Riemann surface with spectral accuracy. At the singularities of the algebraic curve, Puiseux expansions computed by contour integration on the circles around the singularities are used to identify the holomorphic differentials. The Abel map is also computed with the Clenshaw-Curtis algorithm and contour integrals. As an application of the code, solutions to the Kadomtsev-Petviashvili equation are computed on non-hyperelliptic Riemann surfaces.

46 CFR 160.135-7 - Design, construction, and performance of lifeboats.

Code of Federal Regulations, 2013 CFR

2013-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on.... (8) Starting system batteries. Any battery fitted in a totally enclosed lifeboat must be stored in a... starting battery is required per engine. (9) Exhaust. Engine exhaust must be routed away from bilge and...

46 CFR 160.135-7 - Design, construction, and performance of lifeboats.

Code of Federal Regulations, 2012 CFR

2012-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on.... (8) Starting system batteries. Any battery fitted in a totally enclosed lifeboat must be stored in a... starting battery is required per engine. (9) Exhaust. Engine exhaust must be routed away from bilge and...

46 CFR 160.135-7 - Design, construction, and performance of lifeboats.

Code of Federal Regulations, 2014 CFR

2014-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on.... (8) Starting system batteries. Any battery fitted in a totally enclosed lifeboat must be stored in a... starting battery is required per engine. (9) Exhaust. Engine exhaust must be routed away from bilge and...

Operational Efficiency and Productivity Improvement Initiatives in a Large Cardiac Catheterization Laboratory.

PubMed

Reed, Grant W; Hantz, Scott; Cunningham, Rebecca; Krishnaswamy, Amar; Ellis, Stephen G; Khot, Umesh; Rak, Joe; Kapadia, Samir R

2018-02-26

This study sought to report outcomes from an efficiency improvement project in a large cardiac cath lab. Operational inefficiencies are common in the cath lab, yet solutions are challenging. A detailed report describing and providing solutions for these inefficiencies may be valuable in guiding improvements in productivity. In this observational study, the authors report metrics of efficiency before and after a cath lab quality improvement program in June 2014. Main outcomes included lab room start times, room turnaround times, laboratory use, and employee satisfaction. Time series analysis was used to assess trend over time. Chi-square testing and analysis of variance were used to assess change before and after the initiative. The principal changes included implementation of a pyramidal nursing schedule, increased use of an electronic scheduling system, and increased utilization of a preparation and recovery area. Comparing before with after the program, start times improved an average of 17 min, and on-time starts improved from 61.8% to 81.7% (p = 0.0024). Turnaround times improved from 20.5 min to 16.4 min (trend p < 0.0001), and the proportion of days at full lab utilization improved from 7.7% to 77.3% (p < 0.00001). There were no increases in overtime, night, or weekend cases. There was a reduction in full time employees from 36.1 in 2013 to 29.6 in 2016, with an improvement in employee satisfaction. A systematic approach to reducing inefficiencies can improve cath lab start times, turnaround times, and overall productivity. This knowledge may be helpful in assisting other cath labs in similar efficiency improvement initiatives. Copyright © 2018 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Functional renormalization-group approaches, one-particle (irreducible) reducible with respect to local Green’s functions, with dynamical mean-field theory as a starting point

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katanin, A. A., E-mail: katanin@mail.ru

We consider formulations of the functional renormalization-group (fRG) flow for correlated electronic systems with the dynamical mean-field theory as a starting point. We classify the corresponding renormalization-group schemes into those neglecting one-particle irreducible six-point vertices (with respect to the local Green’s functions) and neglecting one-particle reducible six-point vertices. The former class is represented by the recently introduced DMF{sup 2}RG approach [31], but also by the scale-dependent generalization of the one-particle irreducible representation (with respect to local Green’s functions, 1PI-LGF) of the generating functional [20]. The second class is represented by the fRG flow within the dual fermion approach [16, 32].more » We compare formulations of the fRG approach in each of these cases and suggest their further application to study 2D systems within the Hubbard model.« less

Comparison of Multiple Molecular Dynamics Trajectories Calculated for the Drug-Resistant HIV-1 Integrase T66I/M154I Catalytic Domain

PubMed Central

Brigo, Alessandro; Lee, Keun Woo; Iurcu Mustata, Gabriela; Briggs, James M.

2005-01-01

HIV-1 integrase (IN) is an essential enzyme for the viral replication and an interesting target for the design of new pharmaceuticals for multidrug therapy of AIDS. Single and multiple mutations of IN at residues T66, S153, or M154 confer degrees of resistance to several inhibitors that prevent the enzyme from performing its normal strand transfer activity. Four different conformations of IN were chosen from a prior molecular dynamics (MD) simulation on the modeled IN T66I/M154I catalytic core domain as starting points for additional MD studies. The aim of this article is to understand the dynamic features that may play roles in the catalytic activity of the double mutant enzyme in the absence of any inhibitor. Moreover, we want to verify the influence of using different starting points on the MD trajectories and associated dynamical properties. By comparison of the trajectories obtained from these MD simulations we have demonstrated that the starting point does not affect the conformational space explored by this protein and that the time of the simulation is long enough to achieve convergence for this system. PMID:15764656

HIV prevention costs and program scale: data from the PANCEA project in five low and middle-income countries.

PubMed

Marseille, Elliot; Dandona, Lalit; Marshall, Nell; Gaist, Paul; Bautista-Arredondo, Sergio; Rollins, Brandi; Bertozzi, Stefano M; Coovadia, Jerry; Saba, Joseph; Lioznov, Dmitry; Du Plessis, Jo-Ann; Krupitsky, Evgeny; Stanley, Nicci; Over, Mead; Peryshkina, Alena; Kumar, S G Prem; Muyingo, Sowedi; Pitter, Christian; Lundberg, Mattias; Kahn, James G

2007-07-12

Economic theory and limited empirical data suggest that costs per unit of HIV prevention program output (unit costs) will initially decrease as small programs expand. Unit costs may then reach a nadir and start to increase if expansion continues beyond the economically optimal size. Information on the relationship between scale and unit costs is critical to project the cost of global HIV prevention efforts and to allocate prevention resources efficiently. The "Prevent AIDS: Network for Cost-Effectiveness Analysis" (PANCEA) project collected 2003 and 2004 cost and output data from 206 HIV prevention programs of six types in five countries. The association between scale and efficiency for each intervention type was examined for each country. Our team characterized the direction, shape, and strength of this association by fitting bivariate regression lines to scatter plots of output levels and unit costs. We chose the regression forms with the highest explanatory power (R2). Efficiency increased with scale, across all countries and interventions. This association varied within intervention and within country, in terms of the range in scale and efficiency, the best fitting regression form, and the slope of the regression. The fraction of variation in efficiency explained by scale ranged from 26-96%. Doubling in scale resulted in reductions in unit costs averaging 34.2% (ranging from 2.4% to 58.0%). Two regression trends, in India, suggested an inflection point beyond which unit costs increased. Unit costs decrease with scale across a wide range of service types and volumes. These country and intervention-specific findings can inform projections of the global cost of scaling up HIV prevention efforts.

Assessing the efficiency of different CSO positions based on network graph characteristics.

PubMed

Sitzenfrei, R; Urich, C; Möderl, M; Rauch, W

2013-01-01

The technical design of urban drainage systems comprises two major aspects: first, the spatial layout of the sewer system and second, the pipe-sizing process. Usually, engineers determine the spatial layout of the sewer network manually, taking into account physical features and future planning scenarios. Before the pipe-sizing process starts, it is important to determine locations of possible weirs and combined sewer overflows (CSOs) based on, e.g. distance to receiving water bodies or to a wastewater treatment plant and available space for storage units. However, positions of CSOs are also determined by topological characteristics of the sewer networks. In order to better understand the impact of placement choices for CSOs and storage units in new systems, this work aims to determine case unspecific, general rules. Therefore, based on numerous, stochastically generated virtual alpine sewer systems of different sizes it is investigated how choices for placement of CSOs and storage units have an impact on the pipe-sizing process (hence, also on investment costs) and on technical performance (CSO efficiency and flooding). To describe the impact of the topological positions of these elements in the sewer networks, graph characteristics are used. With an evaluation of 2,000 different alpine combined sewer systems, it was found that, as expected, with CSOs at more downstream positions in the network, greater construction costs and better performance regarding CSO efficiency result. At a specific point (i.e. topological network position), no significant difference (further increase) in construction costs can be identified. Contrarily, the flooding efficiency increases with more upstream positions of the CSOs. Therefore, CSO and flooding efficiency are in a trade-off conflict and a compromise is required.

Mechanisms Affecting Performance of the BaBar Resistive Plate Chambers and Searches for Remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Changguo

2003-09-19

The BaBar experiment at PEPII relies on the Instrumentation of the Flux Return (IFR) for both muon identification and KL detection. The active detector is composed of Resistive Plate Chambers (RPC's) operated in streamer mode. Since the start of operation the RPC's have suffered persistent efficiency deterioration and dark current increase problems. The ''autopsy'' of bad BaBar RPC's revealed that in many cases uncured Linseed oil droplets had formed on the inner surface of the Bakelite plates, leading to current paths from oil ''stalagmites'' bridging the 2 mm gap. In this paper a possible model of this ''stalagmite'' formation andmore » its effect on the dark current and efficiency of RPC chambers is presented. Laboratory test results strongly support this model. Based upon this model we are searching for solutions to eliminate the unfavorable effect of the oil stalagmites. The lab tests show that the stalagmite resistivity increases dramatically if exposed to the air, an observation that points to a possible way to remedy the damage and increase the efficiency. We have seen that flowing an oxygen gas mixture into the chamber helps to polymerize the uncured linseed oil. Consequently the resistivity of the bridged oil stalagmites increases, as does that of the oil coating on the frame edges and spacers, significantly reducing the RPC dark currents and low-efficiency regions. We have tested this idea on two chambers removed from BaBar because of their low efficiency and high dark current. These test results are reported in the paper, and two other remediation methods also mentioned. We continue to study this problem, and try to find new treatments with permanent improvement.« less

Vegetation in transition: the Southwest's dynamic past century

Treesearch

Raymond M. Turner

2005-01-01

Monitoring that follows long-term vegetation changes often requires selection of a temporal baseline. Any such starting point is to some degree artificial, but in some instances there are aids that can be used as guides to baseline selection. Matched photographs duplicating scenes first recorded on film a century or more ago reveal changes that help select the starting...

Implications of the Dynamics of the New Networked Economy for E-Business Start-Ups: The Case of Philips' Access Point.

ERIC Educational Resources Information Center

Tovstiga, George; Fantner, Ernest J.

2000-01-01

Examines implications of the networked economy for e-commerce business start-ups. Revisits the notion of "value" and "value creation" in a network context. Examines "value" relative to technological innovation. Looks at implications of the network environment for the organization and transformation of the enterprise's…

Increased Coal Plant Flexibility Can Improve Renewables Integration |

Science.gov Websites

practices that enable lower turndowns, faster starts and stops, and faster ramping between load set-points faster ramp rates and faster and less expensive starts. Flexible Load - Demand Response Resources Demand response (DR) is a load management practice of deliberately reducing or adding load to balance the system

Nanocrystalline ceramic materials

DOEpatents

Siegel, R.W.; Nieman, G.W.; Weertman, J.R.

1994-06-14

A method is disclosed for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material. 19 figs.

Let's Start in Our Own Backyard: Children's Engagement with Science through the Natural Environment

ERIC Educational Resources Information Center

Alexander, Athalie; Russo, Sharon

2010-01-01

Capitalising on areas in which teachers feel most comfortable, the teaching of Biology, environmental education or nature to young children can be an alternative way of introducing and understanding Science. A "Citizen Science" program currently being run by the University of South Australia (UniSA) may be an appropriate starting point.…

A Well-Started Beginning Elementary Teacher's Beliefs and Practices in Relation to Reform Recommendations about Inquiry-Based Science

ERIC Educational Resources Information Center

Avraamidou, Lucy

2017-01-01

Given reform recommendations emphasizing scientific inquiry and empirical evidence pointing to the difficulties beginning teachers face in enacting inquiry-based science, this study explores a well-started beginning elementary teacher's (Sofia) beliefs about inquiry-based science and related instructional practices. In order to explore Sofia's…

Improving Head Start Students' Early Literacy Skills Using Technology

ERIC Educational Resources Information Center

Shamir, Haya; Yoder, Erik; Feehan, Kathryn; Pocklington, David

2018-01-01

While recent literature has pointed to the efficacy of computer-assisted instruction (CAI) in providing educational intervention at an early age, there is a lack of research exploring its use in a pre-kindergarten setting. The current study assessed the efficacy of CAI on students at the start of their academic careers. The Waterford Early…

Specific Barriers and Drivers in Different Stages of Decision-Making about Energy Efficiency Upgrades in Private Homes

PubMed Central

Klöckner, Christian A.; Nayum, Alim

2016-01-01

Energy efficiency upgrades of privately owned homes like adding to the insulation layers in the walls, roof or floor, or replacing windows with more efficiently insulated versions can contribute significantly to reducing the energy impact of the building sector and thus also the CO2 footprint of a household. However, even in countries like Norway that have a rather high rate of renovation, energy upgrades are not always integrated into such a refurbishment project. This study tests which structural and internal psychological barriers hinder and which drivers foster decision-making to implement such measures, once a renovation project is planned. With a theoretical background in stage-based models of decision-making 24 barriers and drivers were tested for their specific effect in the stages of decision-making. The four stages of decision-making assumed in this study were (1) “not being in a decision mode,” (2) “deciding what to do,” (3) “deciding how to do it,” and (4) “planning implementation.” Based on an online survey of 3787 Norwegian households, it was found that the most important barriers toward deciding to implement energy efficiency upgrades were not owning the dwelling and feeling the right time had not come yet. The most important drivers of starting to decide were higher expected comfort levels, better expected living conditions, and an expected reduction of energy costs. For the transition from deciding what to do to how to do it, not managing to make a decision and feeling the right point in time has not come yet were the strongest barriers, easily accessible information and an expected reduction of energy costs were the most important drivers. The final transition from deciding how to do the upgrades to planning implementation was driven by expecting a payoff within a reasonable time frame and higher expected comfort levels; the most important barriers were time demands for supervising contractors and—again—a feeling that the right point in time has not come yet. Implications for policy-making and marketing are discussed. PMID:27660618

Specific Barriers and Drivers in Different Stages of Decision-Making about Energy Efficiency Upgrades in Private Homes.

PubMed

Klöckner, Christian A; Nayum, Alim

2016-01-01

Energy efficiency upgrades of privately owned homes like adding to the insulation layers in the walls, roof or floor, or replacing windows with more efficiently insulated versions can contribute significantly to reducing the energy impact of the building sector and thus also the CO2 footprint of a household. However, even in countries like Norway that have a rather high rate of renovation, energy upgrades are not always integrated into such a refurbishment project. This study tests which structural and internal psychological barriers hinder and which drivers foster decision-making to implement such measures, once a renovation project is planned. With a theoretical background in stage-based models of decision-making 24 barriers and drivers were tested for their specific effect in the stages of decision-making. The four stages of decision-making assumed in this study were (1) "not being in a decision mode," (2) "deciding what to do," (3) "deciding how to do it," and (4) "planning implementation." Based on an online survey of 3787 Norwegian households, it was found that the most important barriers toward deciding to implement energy efficiency upgrades were not owning the dwelling and feeling the right time had not come yet. The most important drivers of starting to decide were higher expected comfort levels, better expected living conditions, and an expected reduction of energy costs. For the transition from deciding what to do to how to do it, not managing to make a decision and feeling the right point in time has not come yet were the strongest barriers, easily accessible information and an expected reduction of energy costs were the most important drivers. The final transition from deciding how to do the upgrades to planning implementation was driven by expecting a payoff within a reasonable time frame and higher expected comfort levels; the most important barriers were time demands for supervising contractors and-again-a feeling that the right point in time has not come yet. Implications for policy-making and marketing are discussed.

Towards 3D Matching of Point Clouds Derived from Oblique and Nadir Airborne Imagery

NASA Astrophysics Data System (ADS)

Zhang, Ming

Because of the low-expense high-efficient image collection process and the rich 3D and texture information presented in the images, a combined use of 2D airborne nadir and oblique images to reconstruct 3D geometric scene has a promising market for future commercial usage like urban planning or first responders. The methodology introduced in this thesis provides a feasible way towards fully automated 3D city modeling from oblique and nadir airborne imagery. In this thesis, the difficulty of matching 2D images with large disparity is avoided by grouping the images first and applying the 3D registration afterward. The procedure starts with the extraction of point clouds using a modified version of the RIT 3D Extraction Workflow. Then the point clouds are refined by noise removal and surface smoothing processes. Since the point clouds extracted from different image groups use independent coordinate systems, there are translation, rotation and scale differences existing. To figure out these differences, 3D keypoints and their features are extracted. For each pair of point clouds, an initial alignment and a more accurate registration are applied in succession. The final transform matrix presents the parameters describing the translation, rotation and scale requirements. The methodology presented in the thesis has been shown to behave well for test data. The robustness of this method is discussed by adding artificial noise to the test data. For Pictometry oblique aerial imagery, the initial alignment provides a rough alignment result, which contains a larger offset compared to that of test data because of the low quality of the point clouds themselves, but it can be further refined through the final optimization. The accuracy of the final registration result is evaluated by comparing it to the result obtained from manual selection of matched points. Using the method introduced, point clouds extracted from different image groups could be combined with each other to build a more complete point cloud, or be used as a complement to existing point clouds extracted from other sources. This research will both improve the state of the art of 3D city modeling and inspire new ideas in related fields.

Improving operating room first start efficiency - value of both checklist and a pre-operative facilitator.

PubMed

Panni, M K; Shah, S J; Chavarro, C; Rawl, M; Wojnarwsky, P K; Panni, J K

2013-10-01

There are multiple components leading to improved operating room efficiency. We undertook a project focusing on first case starts; accounting for each delay component on a global basis. Our hypothesis was there would be a reduction in first start delays after we implemented strategies to address the issues identified through this accounting process. An orange sheet checklist was implemented, with specific items that needed to be clear prior to roll back to the operating room (OR), and an OR facilitator was employed to intervene whenever there were any missing items needed for a specific patient. We present the data from this quality improvement project over an 18-month period. Initially, 10.07 (± 0.73) delayed first starts occurred per day but declined steadily over time to a low of 4.95 (± 0.38) per day after 6 months (-49.2 %, P < 0.001). By the end of the project, the most common reasons for delay still included late surgical attending (19%), schedule changes (14%) as well as 'other reasons' (13%), but with an overall reduction per day of each. Total anaesthesia delay initially totalled 11% of the first start delays, but was negligible (< 1%) at the project's completion. While we have a challenging operating room environment based on our patient population, multiple trainees in both the surgery and anaesthesiology teams: an orange sheet - pre-operative checklist in addition to a dedicated pre-operative facilitator; allowed us to make a substantial improvement in our first start on time starts. © 2013 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

A novel KFCM based fault diagnosis method for unknown faults in satellite reaction wheels.

PubMed

Hu, Di; Sarosh, Ali; Dong, Yun-Feng

2012-03-01

Reaction wheels are one of the most critical components of the satellite attitude control system, therefore correct diagnosis of their faults is quintessential for efficient operation of these spacecraft. The known faults in any of the subsystems are often diagnosed by supervised learning algorithms, however, this method fails to work correctly when a new or unknown fault occurs. In such cases an unsupervised learning algorithm becomes essential for obtaining the correct diagnosis. Kernel Fuzzy C-Means (KFCM) is one of the unsupervised algorithms, although it has its own limitations; however in this paper a novel method has been proposed for conditioning of KFCM method (C-KFCM) so that it can be effectively used for fault diagnosis of both known and unknown faults as in satellite reaction wheels. The C-KFCM approach involves determination of exact class centers from the data of known faults, in this way discrete number of fault classes are determined at the start. Similarity parameters are derived and determined for each of the fault data point. Thereafter depending on the similarity threshold each data point is issued with a class label. The high similarity points fall into one of the 'known-fault' classes while the low similarity points are labeled as 'unknown-faults'. Simulation results show that as compared to the supervised algorithm such as neural network, the C-KFCM method can effectively cluster historical fault data (as in reaction wheels) and diagnose the faults to an accuracy of more than 91%. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Comparison of Point Cloud Registration Algorithms for Better Result Assessment - Towards AN Open-Source Solution

NASA Astrophysics Data System (ADS)

Lachat, E.; Landes, T.; Grussenmeyer, P.

2018-05-01

Terrestrial and airborne laser scanning, photogrammetry and more generally 3D recording techniques are used in a wide range of applications. After recording several individual 3D datasets known in local systems, one of the first crucial processing steps is the registration of these data into a common reference frame. To perform such a 3D transformation, commercial and open source software as well as programs from the academic community are available. Due to some lacks in terms of computation transparency and quality assessment in these solutions, it has been decided to develop an open source algorithm which is presented in this paper. It is dedicated to the simultaneous registration of multiple point clouds as well as their georeferencing. The idea is to use this algorithm as a start point for further implementations, involving the possibility of combining 3D data from different sources. Parallel to the presentation of the global registration methodology which has been employed, the aim of this paper is to confront the results achieved this way with the above-mentioned existing solutions. For this purpose, first results obtained with the proposed algorithm to perform the global registration of ten laser scanning point clouds are presented. An analysis of the quality criteria delivered by two selected software used in this study and a reflexion about these criteria is also performed to complete the comparison of the obtained results. The final aim of this paper is to validate the current efficiency of the proposed method through these comparisons.

Sample to answer visualization pipeline for low-cost point-of-care blood cell counting

NASA Astrophysics Data System (ADS)

Smith, Suzanne; Naidoo, Thegaran; Davies, Emlyn; Fourie, Louis; Nxumalo, Zandile; Swart, Hein; Marais, Philip; Land, Kevin; Roux, Pieter

2015-03-01

We present a visualization pipeline from sample to answer for point-of-care blood cell counting applications. Effective and low-cost point-of-care medical diagnostic tests provide developing countries and rural communities with accessible healthcare solutions [1], and can be particularly beneficial for blood cell count tests, which are often the starting point in the process of diagnosing a patient [2]. The initial focus of this work is on total white and red blood cell counts, using a microfluidic cartridge [3] for sample processing. Analysis of the processed samples has been implemented by means of two main optical visualization systems developed in-house: 1) a fluidic operation analysis system using high speed video data to determine volumes, mixing efficiency and flow rates, and 2) a microscopy analysis system to investigate homogeneity and concentration of blood cells. Fluidic parameters were derived from the optical flow [4] as well as color-based segmentation of the different fluids using a hue-saturation-value (HSV) color space. Cell count estimates were obtained using automated microscopy analysis and were compared to a widely accepted manual method for cell counting using a hemocytometer [5]. The results using the first iteration microfluidic device [3] showed that the most simple - and thus low-cost - approach for microfluidic component implementation was not adequate as compared to techniques based on manual cell counting principles. An improved microfluidic design has been developed to incorporate enhanced mixing and metering components, which together with this work provides the foundation on which to successfully implement automated, rapid and low-cost blood cell counting tests.

Cost of enlarged operating zone for an existing Francis runner

NASA Astrophysics Data System (ADS)

Monette, Christine; Marmont, Hugues; Chamberland-Lauzon, Joël; Skagerstrand, Anders; Coutu, André; Carlevi, Jens

2016-11-01

Traditionally, hydro power plants have been operated close to best efficiency point, the more stable operating condition for which they have been designed. However, because of changes in the electricity market, many hydro power plants operators wish to operate their machines differently to fulfil those new market needs. New operating conditions can include whole range operation, many start/stops, extensive low load operation, synchronous condenser mode and power/frequency regulation. Many of these new operating conditions may impose more severe fatigue damage than the traditional base load operation close to best efficiency point. Under these conditions, the fatigue life of the runner may be significantly reduced and reparation or replacement cost might occur sooner than expected. In order to design reliable Francis runners for those new challenging operating scenarios, Andritz Hydro has developed various proprietary tools and design rules. These are used within Andritz Hydro to design mechanically robust Francis runners for the operating scenarios fulfilling customer's specifications. To estimate residual life under different operating scenarios of an existing runner designed years ago for best efficiency base load operation, Andritz Hydro's design rules and tools would necessarily lead to conservative results. While the geometry of a new runner can be modified to fulfil all conservative mechanical design rules, the predicted fatigue life of an existing runner under off-design operating conditions may appear rather short because of the conservative safety factor included in the calculations. The most precise and reliable way to calculate residual life of an existing runner under different operating scenarios is to perform a strain gauge measurement campaign on the runner. This paper presents the runner strain gage measurement campaign of a mid-head Francis turbine over all the operating conditions available during the test, the analysis of the measurement signals and the runner residual life assessment under different operating scenarios. With these results, the maintenance cost of the change in operating mode can then be calculated and foreseen by the power plant owner.

Production of drug nanosuspensions: effect of drug physical properties on nanosizing efficiency.

PubMed

Liu, Tao; Müller, Rainer H; Möschwitzer, Jan P

2018-02-01

Drug nanosuspension is one of the established methods to improve the bioavailability of poorly soluble drugs. Drug physical properties aspect (morphology, solid state, starting size et al) is a critical parameter determining the production efficiency. Some drug modification approaches such as spray-drying were proved to improve the millability of drug powders. However, the mechanism behind those improved performances is unclear. This study is to systematically investigate the influence of those physical properties. Five different APIs (active pharmaceutical ingredients) with different millabilities, i.e. resveratrol, hesperetin, glibenclamide, rutin, and quercetin, were processed by standard high pressure homogenization (HPH), wet bead milling (WBM), and a combinative method of spray-drying and HPH. Smaller starting sizes of certain APIs could accelerate the particle size reduction velocity during both HPH and WBM processes. Spherical particles were observed for almost all spray-dried powders (except spray-dried hesperetin) after spray-drying. The crystallinity of some spray-dried samples such as rutin and glibenclamide became much lower than their corresponding unmodified powders. Almost all spray-dried drug powders after HPH processes could lead to smaller nanocrystal particle size than unmodified APIs. The modified microstructure instead of solid state after spray-drying explained the potential reason for improved nanosizing efficiency. In addition, the contribution of starting size on the production efficiency was also critical according to both HPH and WBM results.

A single center analysis of factors influencing study start-up timeline in clinical trials.

PubMed

Krafcik, Brianna M; Doros, Gheorghe; Malikova, Marina A

2017-11-01

Efficient start-up phase in clinical trials is crucial to execution. The goal was to determine factors contributing to delays. The start-up milestones were assessed for 38 studies and analyzed. Total start-up time was shorter for following studies: device trials, no outsourcing, fewer ancillary services used and in interventional versus observational designs. The use of a centralized Institutional Review Board (IRB) versus a local IRB reduced time to approval. Studies that never enrolled took longer on average to finalize their budget/contract, and obtain IRB than ones that did enroll. Different features of clinical trials can affect timeline of start-up process. An understanding of the impact of each feature allows for optimization.

Forest restoration paradigms

Treesearch

John Stanturf; Brian J. Palik; Mary I. Williams; R. Kasten Dumroese

2014-01-01

An estimated 2 billion ha of forests are degraded globally and global change suggests even greater need for forest restoration. Four forest restoration paradigms are identified and discussed: revegetation, ecological restoration, functional restoration, and forest landscape restoration. Restoration is examined in terms of a degraded starting point and an ending point...

27 CFR 9.108 - Ozark Mountain.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., revised 1969); (2) Jefferson City, Missouri (1955, revised 1970); (3) Springfield, Missouri (1954, revised... following boundary description is the point at which the Missouri River joins the Mississippi River north of... the starting point westward along the Missouri River until it meets the Osage River; (ii) Then further...

A General Method for Solving Systems of Non-Linear Equations

NASA Technical Reports Server (NTRS)

Nachtsheim, Philip R.; Deiss, Ron (Technical Monitor)

1995-01-01

The method of steepest descent is modified so that accelerated convergence is achieved near a root. It is assumed that the function of interest can be approximated near a root by a quadratic form. An eigenvector of the quadratic form is found by evaluating the function and its gradient at an arbitrary point and another suitably selected point. The terminal point of the eigenvector is chosen to lie on the line segment joining the two points. The terminal point found lies on an axis of the quadratic form. The selection of a suitable step size at this point leads directly to the root in the direction of steepest descent in a single step. Newton's root finding method not infrequently diverges if the starting point is far from the root. However, the current method in these regions merely reverts to the method of steepest descent with an adaptive step size. The current method's performance should match that of the Levenberg-Marquardt root finding method since they both share the ability to converge from a starting point far from the root and both exhibit quadratic convergence near a root. The Levenberg-Marquardt method requires storage for coefficients of linear equations. The current method which does not require the solution of linear equations requires more time for additional function and gradient evaluations. The classic trade off of time for space separates the two methods.

Collaborative Indoor Access Point Localization Using Autonomous Mobile Robot Swarm.

PubMed

Awad, Fahed; Naserllah, Muhammad; Omar, Ammar; Abu-Hantash, Alaa; Al-Taj, Abrar

2018-01-31

Localization of access points has become an important research problem due to the wide range of applications it addresses such as dismantling critical security threats caused by rogue access points or optimizing wireless coverage of access points within a service area. Existing proposed solutions have mostly relied on theoretical hypotheses or computer simulation to demonstrate the efficiency of their methods. The techniques that rely on estimating the distance using samples of the received signal strength usually assume prior knowledge of the signal propagation characteristics of the indoor environment in hand and tend to take a relatively large number of uniformly distributed random samples. This paper presents an efficient and practical collaborative approach to detect the location of an access point in an indoor environment without any prior knowledge of the environment. The proposed approach comprises a swarm of wirelessly connected mobile robots that collaboratively and autonomously collect a relatively small number of non-uniformly distributed random samples of the access point's received signal strength. These samples are used to efficiently and accurately estimate the location of the access point. The experimental testing verified that the proposed approach can identify the location of the access point in an accurate and efficient manner.

Efficient computation of the Grünwald-Letnikov fractional diffusion derivative using adaptive time step memory

NASA Astrophysics Data System (ADS)

MacDonald, Christopher L.; Bhattacharya, Nirupama; Sprouse, Brian P.; Silva, Gabriel A.

2015-09-01

Computing numerical solutions to fractional differential equations can be computationally intensive due to the effect of non-local derivatives in which all previous time points contribute to the current iteration. In general, numerical approaches that depend on truncating part of the system history while efficient, can suffer from high degrees of error and inaccuracy. Here we present an adaptive time step memory method for smooth functions applied to the Grünwald-Letnikov fractional diffusion derivative. This method is computationally efficient and results in smaller errors during numerical simulations. Sampled points along the system's history at progressively longer intervals are assumed to reflect the values of neighboring time points. By including progressively fewer points backward in time, a temporally 'weighted' history is computed that includes contributions from the entire past of the system, maintaining accuracy, but with fewer points actually calculated, greatly improving computational efficiency.

Automatic Reconstruction of 3D Building Models from Terrestrial Laser Scanner Data

NASA Astrophysics Data System (ADS)

El Meouche, R.; Rezoug, M.; Hijazi, I.; Maes, D.

2013-11-01

With modern 3D laser scanners we can acquire a large amount of 3D data in only a few minutes. This technology results in a growing number of applications ranging from the digitalization of historical artifacts to facial authentication. The modeling process demands a lot of time and work (Tim Volodine, 2007). In comparison with the other two stages, the acquisition and the registration, the degree of automation of the modeling stage is almost zero. In this paper, we propose a new surface reconstruction technique for buildings to process the data obtained by a 3D laser scanner. These data are called a point cloud which is a collection of points sampled from the surface of a 3D object. Such a point cloud can consist of millions of points. In order to work more efficiently, we worked with simplified models which contain less points and so less details than a point cloud obtained in situ. The goal of this study was to facilitate the modeling process of a building starting from 3D laser scanner data. In order to do this, we wrote two scripts for Rhinoceros 5.0 based on intelligent algorithms. The first script finds the exterior outline of a building. With a minimum of human interaction, there is a thin box drawn around the surface of a wall. This box is able to rotate 360° around an axis in a corner of the wall in search for the points of other walls. In this way we can eliminate noise points. These are unwanted or irrelevant points. If there is an angled roof, the box can also turn around the edge of the wall and the roof. With the different positions of the box we can calculate the exterior outline. The second script draws the interior outline in a surface of a building. By interior outline we mean the outline of the openings like windows or doors. This script is based on the distances between the points and vector characteristics. Two consecutive points with a relative big distance will form the outline of an opening. Once those points are found, the interior outline can be drawn. The designed scripts are able to ensure for simple point clouds: the elimination of almost all noise points and the reconstruction of a CAD model.

Applicability of the 5S management method for quality improvement in health-care facilities: a review.

PubMed

Kanamori, Shogo; Shibanuma, Akira; Jimba, Masamine

2016-01-01

The 5S management method (where 5S stands for sort, set in order, shine, standardize, and sustain) was originally implemented by manufacturing enterprises in Japan. It was then introduced to the manufacturing sector in the West and eventually applied to the health sector for organizing and standardizing the workplace. 5S has recently received attention as a potential solution for improving government health-care services in low- and middle-income countries. We conducted a narrative literature review to explore its applicability to health-care facilities globally, with a focus on three aspects: (a) the context of its application, (b) its impacts, and (c) its adoption as part of government initiatives. To identify relevant research articles, we researched public health databases in English, including CINAHL, PubMed, ScienceDirect, and Web of Science. We found 15 of the 114 articles obtained from the search results to be relevant for full-text analysis of the context and impacts of the 5S application. To identify additional information particularly on its adoption as part of government initiatives, we also examined other types of resources including reference books, reports, didactic materials, government documents, and websites. The 15 empirical studies highlighted its application in primary health-care facilities and a wide range of hospital areas in Brazil, India, Jordan, Senegal, Sri Lanka, Tanzania, the UK, and the USA. The review also found that 5S was considered to be the starting point for health-care quality improvement. Ten studies presented its impacts on quality improvements; the changes resulting from the 5S application were classified into the three dimensions of safety, efficiency, and patient-centeredness. Furthermore, 5S was adopted as part of government quality improvement strategies in India, Senegal, Sri Lanka, and Tanzania. 5S could be applied to health-care facilities regardless of locations. It could be not only a tool for health workers and facility managers but also a strategic option for policymakers. They could consider 5S as the starting point of a government-led quality improvement initiative for improving safety, efficiency, or patient-centeredness aspects particularly in low- and middle-income countries. However, the evidence base, particularly in resource-poor settings, must be expanded.

Joint classification and contour extraction of large 3D point clouds

NASA Astrophysics Data System (ADS)

Hackel, Timo; Wegner, Jan D.; Schindler, Konrad

2017-08-01

We present an effective and efficient method for point-wise semantic classification and extraction of object contours of large-scale 3D point clouds. What makes point cloud interpretation challenging is the sheer size of several millions of points per scan and the non-grid, sparse, and uneven distribution of points. Standard image processing tools like texture filters, for example, cannot handle such data efficiently, which calls for dedicated point cloud labeling methods. It turns out that one of the major drivers for efficient computation and handling of strong variations in point density, is a careful formulation of per-point neighborhoods at multiple scales. This allows, both, to define an expressive feature set and to extract topologically meaningful object contours. Semantic classification and contour extraction are interlaced problems. Point-wise semantic classification enables extracting a meaningful candidate set of contour points while contours help generating a rich feature representation that benefits point-wise classification. These methods are tailored to have fast run time and small memory footprint for processing large-scale, unstructured, and inhomogeneous point clouds, while still achieving high classification accuracy. We evaluate our methods on the semantic3d.net benchmark for terrestrial laser scans with >109 points.

A qualitative exploration of attitudes towards alcohol, and the role of parents and peers of two alcohol-attitude-based segments of the adolescent population.

PubMed

Janssen, Meriam M; Mathijssen, Jolanda J P; van Bon-Martens, Marja J H; van Oers, Hans A M; Garretsen, Henk F L

2014-05-24

An earlier study using social marketing and audience segmentation distinguished five segments of Dutch adolescents aged 12-18 years based on their attitudes towards alcohol. The present, qualitative study focuses on two of these five segments ('ordinaries' and 'ordinary sobers') and explores the attitudes of these two segments towards alcohol, and the role of parents and peers in their alcohol use in more detail. This qualitative study was conducted in the province of North-Brabant, the Netherlands. With a 28-item questionnaire, segments of adolescents were identified. From the ordinaries and ordinary sobers who were willing to participate in a focus group, 55 adolescents (30 ordinaries and 25 ordinary sobers) were selected and invited to participate. Finally, six focus groups were conducted with 12-17 year olds, i.e., three interviews with 17 ordinaries and three interviews with 20 ordinary sobers at three different high schools. The ordinaries thought that drinking alcohol was fun and relaxing. Curiosity was an important factor in starting to drink alcohol. Peer pressure played a role, e.g., it was difficult not to drink when peers were drinking. Most parents advised their child to drink a small amount only. The attitude of ordinary sobers towards alcohol was that drinking alcohol was stupid; moreover, they did not feel the need to drink. Most parents set strict rules and prohibited the use of alcohol before the age of 16. Qualitative insight into the attitudes towards alcohol and the role played by parents and peers, revealed differences between ordinaries and ordinary sobers. Based on these differences and on health education theories, starting points for the development of interventions, for both parents and adolescents, are formulated. Important starting points for interventions targeting ordinaries are reducing perceived peer pressure and learning to make one's own choices. For the ordinary sobers, an important starting point includes enabling them to express to others that they do not feel the need to drink alcohol. Starting points for parents include setting strict rules, restricting alcohol availability at home and monitoring their child's alcohol use.

Production of nitrogen oxides in air pulse-periodic discharge with apokamp

NASA Astrophysics Data System (ADS)

Panarin, Victor A.; Skakun, Victor S.; Sosnin, Eduard A.; Tarasenko, Victor F.

2018-05-01

The decomposition products of pulse-periodic discharge atmospheric pressure plasma in apokamp, diffuse and corona modes were determined by optical and chemical methods. It is shown that apokamp discharge formation starts at a critical value of dissipation power in a discharge channel. Simultaneously, due to the thermochemical reactions, plasma starts to efficiently produce nitrogen oxides.

46 CFR 160.156-7 - Design, construction and performance of rescue boats and fast rescue boats.

Code of Federal Regulations, 2014 CFR

2014-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on... this subpart) meets these requirements for fuel tanks. (9) Starting system batteries. Each battery... the rescue boat has more than one engine, then only one starting battery is required per engine. (10...

46 CFR 160.156-7 - Design, construction and performance of rescue boats and fast rescue boats.

Code of Federal Regulations, 2012 CFR

2012-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on... this subpart) meets these requirements for fuel tanks. (9) Starting system batteries. Each battery... the rescue boat has more than one engine, then only one starting battery is required per engine. (10...

46 CFR 160.156-7 - Design, construction and performance of rescue boats and fast rescue boats.

Code of Federal Regulations, 2013 CFR

2013-10-01

... materials equivalent or superior in strength, design, wet out, and efficiency will be given consideration on... this subpart) meets these requirements for fuel tanks. (9) Starting system batteries. Each battery... the rescue boat has more than one engine, then only one starting battery is required per engine. (10...

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fourteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting January 1, 2004 and ending March 31, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale shakedown and performance testing, program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program has determined the feasibility of the integrated UFP technology through pilot-scale testing, and investigated operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrated experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fifteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting April 1, 2004 and ending June 30, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale testing, kinetic modeling, program management and technology transfer.« less

Efficient High Performance Collective Communication for Distributed Memory Environments

ERIC Educational Resources Information Center

Ali, Qasim

2009-01-01

Collective communication allows efficient communication and synchronization among a collection of processes, unlike point-to-point communication that only involves a pair of communicating processes. Achieving high performance for both kernels and full-scale applications running on a distributed memory system requires an efficient implementation of…

Ideal cycle analysis of a regenerative pulse detonation engine for power production

NASA Astrophysics Data System (ADS)

Bellini, Rafaela

Over the last few decades, considerable research has been focused on pulse detonation engines (PDEs) as a promising replacement for existing propulsion systems with potential applications in aircraft ranging from the subsonic to the lower hypersonic regimes. On the other hand, very little attention has been given to applying detonation for electric power production. One method for assessing the performance of a PDE is through thermodynamic cycle analysis. Earlier works have adopted a thermodynamic cycle for the PDE that was based on the assumption that the detonation process could be approximated by a constant volume process, called the Humphrey cycle. The Fickett-Jacob cycle, which uses the one--dimensional Chapman--Jouguet (CJ) theory of detonation, has also been used to model the PDE cycle. However, an ideal PDE cycle must include a detonation based compression and heat release processes with a finite chemical reaction rate that is accounted for in the Zeldovich -- von Neumann -- Doring model of detonation where the shock is considered a discontinuous jump and is followed by a finite exothermic reaction zone. This work presents a thermodynamic cycle analysis for an ideal PDE cycle for power production. A code has been written that takes only one input value, namely the heat of reaction of a fuel-oxidizer mixture, based on which the program computes all the points on the ZND cycle (both p--v and T--s plots), including the von Neumann spike and the CJ point along with all the non-dimensionalized state properties at each point. In addition, the program computes the points on the Humphrey and Brayton cycles for the same input value. Thus, the thermal efficiencies of the various cycles can be calculated and compared. The heat release of combustion is presented in a generic form to make the program usable with a wide variety of fuels and oxidizers and also allows for its use in a system for the real time monitoring and control of a PDE in which the heat of reaction can be obtained as a function of fuel-oxidizer ratio. The Humphrey and ZND cycles are studied in comparison with the Brayton cycle for different fuel-air mixtures such as methane, propane and hydrogen. The validity and limitations of the ZND and Humphrey cycles related to the detonation process are discussed and the criteria for the selection of the best model for the PDE cycle are explained. It is seen that the ZND cycle is a more appropriate representation of the PDE cycle. Next, the thermal and electrical power generation efficiencies for the PDE are compared with those of the deflagration based Brayton cycle. While the Brayton cycle shows an efficiency of 0 at a compressor pressure ratio of 1, the thermal efficiency for the ZND cycle starts out at 42% for hydrogen--air and then climbs to a peak of 66% at a compression ratio of 7 before falling slowly for higher compression ratios. The Brayton cycle efficiency rises above the PDEs for compression ratios above 23. This finding supports the theoretical advantage of PDEs over the gas turbines because PDEs only require a fan or only a few compressor stages, thereby eliminating the need for heavy compressor machinery, making the PDEs less complex and therefore more cost effective than other engines. Lastly, a regeneration study is presented to analyze how the use of exhaust gases can improve the performance of the system. The thermal efficiencies for the regenerative ZND cycle are compared with the efficiencies for the non--regenerative cycle. For a hydrogen--air mixture the thermal efficiency increases from 52%, for a cycle without regeneration, to 78%, for the regenerative cycle. The efficiency is compared with the Carnot efficiency of 84% which is the maximum possible theoretical efficiency of the cycle. When compared to the Brayton cycle thermal efficiencies, the regenerative cycle shows efficiencies that are always higher for the pressure ratio studied of 5 ≤ pic ≤ 25, where pi c the compressor pressure ratio of the cycle. This observation strengthens the idea of using regeneration on PDEs.

Trends: Bearding the Proverbial Lion.

ERIC Educational Resources Information Center

Greckel, Wil

1989-01-01

Describes the use of television commercials to teach classical music. Points out that a large number of commercials use classical selections which can serve as a starting point for introducing students to this form. Urges music educators to broaden their views and use these truncated selections to transmit our cultural heritage. (KO)

The Ideology of Certainty in Mathematics Education.

ERIC Educational Resources Information Center

Borba, Marcelo C.; Skovsmose, Ole

1997-01-01

Presents one aspect that makes mathematics the final word in many discussions, the ideology of certainty. Argues that one way of challenging the ideology of certainty is to change classroom practice by introducing a landscape of discussion on chaotic nature where relativity, provisional starting points, different points of view, and uncertainty…

Music Cultural Pedagogy in the "Network Society"

ERIC Educational Resources Information Center

Sakai, Winfried

2014-01-01

The present contribution to theory construction in music educational research focuses on the contemporary requirements for general music education. One starting point are the normative claims of a democratic liberal education as to find in the field of critical pedagogy and the sociology of education. Another point of departure is provided by…

Using Data Visualization to Examine an Academic Library Collection

ERIC Educational Resources Information Center

Finch, Jannette L.; Flenner, Angela R.

2016-01-01

The authors generated data visualizations to compare sections of the library book collection, expenditures in those areas, student enrollment in majors and minors, and number of courses. The visualizations resulting from the entered data provide an excellent starting point for conversations about possible imbalances in the collection and point to…

Development of the PEBLebl Traveling Salesman Problem Computerized Testbed

ERIC Educational Resources Information Center

Mueller, Shane T.; Perelman, Brandon S.; Tan, Yin Yin; Thanasuan, Kejkaew

2015-01-01

The traveling salesman problem (TSP) is a combinatorial optimization problem that requires finding the shortest path through a set of points ("cities") that returns to the starting point. Because humans provide heuristic near-optimal solutions to Euclidean versions of the problem, it has sometimes been used to investigate human visual…

One Third More: Maine Head Start Expansion with State Funds.

ERIC Educational Resources Information Center

Weil, Jane

The expansion of Project Head Start in Maine to the point of serving nearly 25 percent of eligible children is detailed in this report. Section I describes the expansion and some of its benefits, such as equalization of services across county boundaries and the establishment of a uniform unit cost-per-child for use in appropriating state funds.…

Supporting Disciplinary Talk from the Start of School: Teaching Students to Think and Talk Like Scientists

ERIC Educational Resources Information Center

Wright, Tanya S.; Gotwals, Amelia Wenk

2017-01-01

In this article, the authors first review the research literature to show why supporting talk from the start of school is important for students' long-term literacy development. The authors then define and describe disciplinary talk and argue that it is an important entry point into science and disciplinary literacy learning for young students.…

78 FR 41300 - Special Local Regulations and Safety Zones; Marine Events in Captain of the Port Long Island...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... the events start and finish points. The Coast Guard received information about the Riverhead Rocks Triathlon from the event sponsor, Event Power, on May 2, 2013. Event Power held the Riverhead Rocks... difficulty of rescheduling the early morning start of the swim event with the desired high tide cycle. While...

Lessons Learned in Dreamland: How a Small Urban Charter School Overcame Start-Up Woes to Increase Reading Scores 28 Percent

ERIC Educational Resources Information Center

Carter, Carolyn J.

2011-01-01

Charter school administrators weathered start-up woes, among them challenging students with unmet needs, verbal assaults, dwindling student enrollment, and a first-year budget deficit exceeding $200,000 to implement a reading improvement strategy that holds promise for helping at-risk students read better, a point particularly underscored…

Cosmological viability conditions for f(T) dark energy models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Setare, M.R.; Mohammadipour, N., E-mail: rezakord@ipm.ir, E-mail: N.Mohammadipour@uok.ac.ir

2012-11-01

Recently f(T) modified teleparallel gravity where T is the torsion scalar has been proposed as the natural gravitational alternative for dark energy. We perform a detailed dynamical analysis of these models and find conditions for the cosmological viability of f(T) dark energy models as geometrical constraints on the derivatives of these models. We show that in the phase space exists two cosmologically viable trajectory which (i) The universe would start from an unstable radiation point, then pass a saddle standard matter point which is followed by accelerated expansion de sitter point. (ii) The universe starts from a saddle radiation epoch,more » then falls onto the stable matter era and the system can not evolve to the dark energy dominated epoch. Finally, for a number of f(T) dark energy models were proposed in the more literature, the viability conditions are investigated.« less

Magnification of starting torques of dc motors by maximum power point trackers in photovoltaic systems

NASA Technical Reports Server (NTRS)

Appelbaum, Joseph; Singer, S.

1989-01-01

Direct current (dc) motors are used in terrestrial photovoltaic (PV) systems such as in water-pumping systems for irrigation and water supply. Direct current motors may also be used for space applications. Simple and low weight systems including dc motors may be of special interest in space where the motors are directly coupled to the solar cell array (with no storage). The system will operate only during times when sufficient insolation is available. An important performance characteristic of electric motors is the starting to rated torque ratio. Different types of dc motors have different starting torque ratios. These ratios are dictated by the size of solar cell array, and the developed motor torque may not be sufficient to overcome the load starting torque. By including a maximum power point tracker (MPPT) in the PV system, the starting to rated torque ratio will increase, the amount of which depends on the motor type. The starting torque ratio is calculated for the permanent magnet, series and shunt excited dc motors when powered by solar cell arrays for two cases: with and without MPPT's. Defining a motor torque magnification by the ratio of the motor torque with an MPPT to the motor torque without an MPPT, a magnification of 3 was obtained for the permanent magnet motor and a magnification of 7 for both the series and shunt motors. The effect of the variation of solar insolation on the motor starting torque was covered. All motor types are less sensitive to insolation variation in systems including MPPT's as compared to systems with MPPT's. The analysis of this paper will assist the PV system designed to determine whether or not to include an MPPT in the system for a specific motor type.

A population-based study of stimulant drug treatment of ADHD and academic progress in children.

PubMed

Zoëga, Helga; Rothman, Kenneth J; Huybrechts, Krista F; Ólafsson, Örn; Baldursson, Gísli; Almarsdóttir, Anna B; Jónsdóttir, Sólveig; Halldórsson, Matthías; Hernández-Diaz, Sonia; Valdimarsdóttir, Unnur A

2012-07-01

We evaluated the hypothesis that later start of stimulant treatment of attention-deficit/hyperactivity disorder adversely affects academic progress in mathematics and language arts among 9- to 12-year-old children. We linked nationwide data from the Icelandic Medicines Registry and the Database of National Scholastic Examinations. The study population comprised 11,872 children born in 1994-1996 who took standardized tests in both fourth and seventh grade. We estimated the probability of academic decline (drop of ≥ 5.0 percentile points) according to drug exposure and timing of treatment start between examinations. To limit confounding by indication, we concentrated on children who started treatment either early or later, but at some point between fourth-grade and seventh-grade standardized tests. In contrast with nonmedicated children, children starting stimulant treatment between their fourth- and seventh-grade tests were more likely to decline in test performance. The crude probability of academic decline was 72.9% in mathematics and 42.9% in language arts for children with a treatment start 25 to 36 months after the fourth-grade test. Compared with those starting treatment earlier (≤ 12 months after tests), the multivariable adjusted risk ratio (RR) for decline was 1.7 (95% confidence interval [CI]: 1.2-2.4) in mathematics and 1.1 (95% CI: 0.7-1.8) in language arts. The adjusted RR of mathematics decline with later treatment was higher among girls (RR, 2.7; 95% CI: 1.2-6.0) than boys (RR, 1.4; 95% CI: 0.9-2.0). Later start of stimulant drug treatment of attention-deficit/hyperactivity disorder is associated with academic decline in mathematics.

Magnification of starting torques of dc motors by maximum power point trackers in photovoltaic systems

NASA Technical Reports Server (NTRS)

Appelbaum, J.; Singer, S.

1989-01-01

A calculation of the starting torque ratio of permanent magnet, series, and shunt-excited dc motors powered by solar cell arrays is presented for two cases, i.e., with and without a maximum-power-point tracker (MPPT). Defining motor torque magnification by the ratio of the motor torque with an MPPT to the motor torque without an MPPT, a magnification of 3 for the permanent magnet motor and a magnification of 7 for both the series and shunt motors are obtained. The study also shows that all motor types are less sensitive to solar insolation variation in systems including MPPTs as compared to systems without MPPTs.

[The forgotten capitulation of evidence-based medicine].

PubMed

Schoemaker, Casper G; Smulders, Yvo M

2015-01-01

In 1992, the Canadian physician Gordon Guyatt wrote an article that is generally regarded as the starting point of evidence-based medicine (EBM). He described the ideas behind the McMaster residency programme for 'evidence-based practitioners', founded by David Sackett. Eight years later, in 2000, Guyatt concluded that this programme was too ambitious. In a new publication he described most doctors as 'evidence-users'. This editorial marks the transition from an individual to a collective form of EBM, emphasizing the use of evidence-based guidelines. The starting point of this collective form of EBM is not the well-known 1992 paper, but the forgotten editorial in 2000, which was described by Guyatt's colleagues as the capitulation of EBM.

Successful strategies for improving operating room efficiency at academic institutions.

PubMed

Overdyk, F J; Harvey, S C; Fishman, R L; Shippey, F

1998-04-01

In this prospective study, we evaluated the etiology of operating room (OR) delays in an academic institution, examined the impact of multidisciplinary strategies to improve OR efficiency, and established OR timing benchmarks for use in future OR efficiency studies. OR times and delay etiologies were collected for 94 cases during the initial phase of the study. Timing data and delay etiologies were analyzed, and 2 wk of multidisciplinary OR efficiency awareness education was conducted for the nursing, surgical, and anesthesia staff. After the education period, timing data were collected from 1787 cases, and monthly reports listing individual case delays and timing data were sent to the Chiefs of Service. For the first case of the day, patient in room, anesthesia ready, surgical preparation start, and procedure start time were significantly earlier (P < 0.01) in the posteducation period compared with the preeducation period, and the procedure start time for the first case of the day occurred, on average, 22 min earlier than all other procedures. For all cases combined, turnover time decreased, on average, by 16 min. Unavailability of surgeons, anesthesiologists, and residents decreased significantly (P < 0.05) as causes of OR delays. Anesthesia induction times were consistently longer for the vascular and cardiothoracic services, whereas surgical preparation time was increased for the neurosurgical and orthopedic services (P < 0.05). Identification of the etiology of OR inefficiency, combined with multidisciplinary awareness training and personal accountability, can improve OR efficiency. The time savings realized are probably most cost-effective when combined with more flexible OR staffing and improved OR scheduling. We achieved significant improvements in operating room efficiency by analyzing operating room data on causes of delays, devising strategies for minimizing the most common delays, and subsequently measuring delay data. Personal accountability, streamlining of procedures, interdisciplinary team work, and accurate data collection were all important contributors to improved efficiency.

Pedestrian Pathfinding in Urban Environments: Preliminary Results

NASA Astrophysics Data System (ADS)

López-Pazos, G.; Balado, J.; Díaz-Vilariño, L.; Arias, P.; Scaioni, M.

2017-12-01

With the rise of urban population, many initiatives are focused upon the smart city concept, in which mobility of citizens arises as one of the main components. Updated and detailed spatial information of outdoor environments is needed to accurate path planning for pedestrians, especially for people with reduced mobility, in which physical barriers should be considered. This work presents a methodology to use point clouds to direct path planning. The starting point is a classified point cloud in which ground elements have been previously classified as roads, sidewalks, crosswalks, curbs and stairs. The remaining points compose the obstacle class. The methodology starts by individualizing ground elements and simplifying them into representative points, which are used as nodes in the graph creation. The region of influence of obstacles is used to refine the graph. Edges of the graph are weighted according to distance between nodes and according to their accessibility for wheelchairs. As a result, we obtain a very accurate graph representing the as-built environment. The methodology has been tested in a couple of real case studies and Dijkstra algorithm was used to pathfinding. The resulting paths represent the optimal according to motor skills and safety.

Treatment Dosing Patterns and Clinical Outcomes for Patients with Type 2 Diabetes Starting or Switching to Treatment with Insulin Glargine (300 Units per Milliliter) in a Real-World Setting: A Retrospective Observational Study.

PubMed

Gupta, Shaloo; Wang, Hongwei; Skolnik, Neil; Tong, Liyue; Liebert, Ryan M; Lee, Lulu K; Stella, Peter; Cali, Anna; Preblick, Ronald

2018-01-01

Usage patterns and effectiveness of a longer-acting formulation of insulin glargine at a strength of 300 units per milliliter (Gla-300) have not been studied in real-world clinical practice. This study evaluated differences in dosing and clinical outcomes before and after Gla-300 treatment initiation in patients with type 2 diabetes starting or switching to treatment with Gla-300 to assess whether the benefits observed in clinical trials translate into real-world settings. This was a retrospective observational study using medical record data obtained by physician survey for patients starting treatment with insulin glargine at a strength of 100 units per milliliter (Gla-100) or Gla-300, or switching to treatment with Gla-300 from treatment with another basal insulin (BI). Differences in dosing and clinical outcomes before versus after treatment initiation or switching were examined by generalized linear mixed-effects models. Among insulin-naive patients starting BI treatment, no difference in the final titrated dose was observed in patients starting Gla-300 treatment versus those starting Gla-100 treatment [least-squares (LS) mean 0.43 units per kilogram vs 0.44 units per kilogram; P = 0.77]. Both groups had significant hemoglobin A 1c level reductions (LS mean 1.21 percentage points for Gla-300 and 1.12 percentage points for Gla-100 ; both P < 0.001). The relative risk of hypoglycemic events after Gla-300 treatment initiation was lower than that after Gla-100 treatment initiation [0.31, 95% confidence interval (CI) 0.12-0.81; P = 0.018] at similar daily doses. The daily dose of BI was significantly lower after switching to treatment with Gla-300 from treatment with another BI (0.73 units per kilogram before switch vs 0.58 units per kilogram after switch; P = 0.02). The mean hemoglobin A 1c level was significantly lower after switching than before switching (adjusted difference - 0.95 percentage points, 95% CI - 1.13 to - 0.78 percentage points ; P < 0.0001). Hypoglycemic events per patient-year were significantly lower (relative risk 0.17, 95% CI 0.11-0.26; P < 0.0001). Insulin-naive patients starting Gla-300 treatment had fewer hypoglycemic events, a similar hemoglobin A 1c level reduction, and no difference in insulin dose versus patients starting Gla-100 treatment. Patients switching to Gla-300 treatment from treatment with other BIs had significantly lower daily doses of BI, with fewer hypoglycemic events, without compromise of hemoglobin A 1c level reduction. These findings suggest Gla-300 in a real-world setting provides benefits in terms of dosing, with improved hemoglobin A 1c level and hypoglycemia rates. Sanofi US Inc. (Bridgewater, NJ, USA).

Flow control by means of a traveling curvature wave in fishlike escape responses

NASA Astrophysics Data System (ADS)

Liu, Geng; Yu, Yong-Liang; Tong, Bing-Gang

2011-11-01

Fish usually bend their bodies into a ‘‘C’’ shape and then beat their tails one or more times to escape from predators (in nature) or stimuli (in experiments). The maneuvering behavior, i.e., the C-shape bending and the return flapping, is called C-start. In this paper, the escaping performance of fishlike C-start motions has been numerically investigated for a flow physics study by the use of a two-dimensional deformable foil bending and stretching quickly. The C-start motions, performed in the quiescent water and based on prescribed deforming modes, are predicted by a numerical method coupling the two-dimensional incompressible Navier-Stokes equations and the deforming body dynamic equations. It has been found earlier that a typical C-start motion consists of (1) a main C-shape bending and (2) a rearward travelling curvature wave which was seldom mentioned in previous studies. In order to reveal the flow control mechanism of the traveling curvature wave in a fish's C-start motion, two kinds of C-start flows with different deforming modes, namely the integrated mode (IM, a C-shape bending plus a travelling curvature wave) and the basic mode (BM, a C-shape bending only) are analyzed and compared in detail. According to the numerical results, it shows that if proper values of the travelling curvature wave parameters are chosen, the foil's escaping maneuverability presented in the IM is much better than that in the BM, i.e. the turn angle and the speed of the center of mass at the end of a C-start in the IM is almost twice as large as those in the BM. Further study shows that the travelling curvature wave not only can enhance the thrust and the centripetal force but also increase the propulsive efficiency. These results suggest that an efficient travelling curvature wave is of great significance in the flow control of a C-start motion. Finally, a parametric study finds that the phase difference between the C-shape bending and the travelling curvature wave (i.e., the initial phase angle in the travelling curvature wave of the deforming model) is a key parameter in the flow control. To achieve the desirable turn angle, escaping speed, and propulsive efficiency in the C-start motions, the initial phase angles must be ranged within specific magnitudes. It is found that for optimum values of the initial phase angle, the foil's flexible deforming process is qualitatively consistent with that of a fish body in nature. The results obtained in this study provide a new physical insight into the understanding of swimming mechanisms of fish's C-start maneuvers.

Flow control by means of a traveling curvature wave in fishlike escape responses.

PubMed

Liu, Geng; Yu, Yong-Liang; Tong, Bing-Gang

2011-11-01

Fish usually bend their bodies into a ''C'' shape and then beat their tails one or more times to escape from predators (in nature) or stimuli (in experiments). The maneuvering behavior, i.e., the C-shape bending and the return flapping, is called C-start. In this paper, the escaping performance of fishlike C-start motions has been numerically investigated for a flow physics study by the use of a two-dimensional deformable foil bending and stretching quickly. The C-start motions, performed in the quiescent water and based on prescribed deforming modes, are predicted by a numerical method coupling the two-dimensional incompressible Navier-Stokes equations and the deforming body dynamic equations. It has been found earlier that a typical C-start motion consists of (1) a main C-shape bending and (2) a rearward travelling curvature wave which was seldom mentioned in previous studies. In order to reveal the flow control mechanism of the traveling curvature wave in a fish's C-start motion, two kinds of C-start flows with different deforming modes, namely the integrated mode (IM, a C-shape bending plus a travelling curvature wave) and the basic mode (BM, a C-shape bending only) are analyzed and compared in detail. According to the numerical results, it shows that if proper values of the travelling curvature wave parameters are chosen, the foil's escaping maneuverability presented in the IM is much better than that in the BM, i.e. the turn angle and the speed of the center of mass at the end of a C-start in the IM is almost twice as large as those in the BM. Further study shows that the travelling curvature wave not only can enhance the thrust and the centripetal force but also increase the propulsive efficiency. These results suggest that an efficient travelling curvature wave is of great significance in the flow control of a C-start motion. Finally, a parametric study finds that the phase difference between the C-shape bending and the travelling curvature wave (i.e., the initial phase angle in the travelling curvature wave of the deforming model) is a key parameter in the flow control. To achieve the desirable turn angle, escaping speed, and propulsive efficiency in the C-start motions, the initial phase angles must be ranged within specific magnitudes. It is found that for optimum values of the initial phase angle, the foil's flexible deforming process is qualitatively consistent with that of a fish body in nature. The results obtained in this study provide a new physical insight into the understanding of swimming mechanisms of fish's C-start maneuvers.

Collaborative Indoor Access Point Localization Using Autonomous Mobile Robot Swarm

PubMed Central

Awad, Fahed; Naserllah, Muhammad; Omar, Ammar; Abu-Hantash, Alaa; Al-Taj, Abrar

2018-01-01

Localization of access points has become an important research problem due to the wide range of applications it addresses such as dismantling critical security threats caused by rogue access points or optimizing wireless coverage of access points within a service area. Existing proposed solutions have mostly relied on theoretical hypotheses or computer simulation to demonstrate the efficiency of their methods. The techniques that rely on estimating the distance using samples of the received signal strength usually assume prior knowledge of the signal propagation characteristics of the indoor environment in hand and tend to take a relatively large number of uniformly distributed random samples. This paper presents an efficient and practical collaborative approach to detect the location of an access point in an indoor environment without any prior knowledge of the environment. The proposed approach comprises a swarm of wirelessly connected mobile robots that collaboratively and autonomously collect a relatively small number of non-uniformly distributed random samples of the access point’s received signal strength. These samples are used to efficiently and accurately estimate the location of the access point. The experimental testing verified that the proposed approach can identify the location of the access point in an accurate and efficient manner. PMID:29385042

Effect of Patiromer on Serum Potassium Level in Patients With Hyperkalemia and Diabetic Kidney Disease: The AMETHYST-DN Randomized Clinical Trial.

PubMed

Bakris, George L; Pitt, Bertram; Weir, Matthew R; Freeman, Mason W; Mayo, Martha R; Garza, Dahlia; Stasiv, Yuri; Zawadzki, Rezi; Berman, Lance; Bushinsky, David A

2015-07-14

Hyperkalemia is a potentially life-threatening condition predominantly seen in patients treated with renin-angiotensin-aldosterone system (RAAS) inhibitors with stage 3 or greater chronic kidney disease (CKD) who may also have diabetes, heart failure, or both. To select starting doses for a phase 3 study and to evaluate the long-term safety and efficacy of a potassium-binding polymer, patiromer, in outpatients with hyperkalemia. Phase 2, multicenter, open-label, dose-ranging, randomized clinical trial (AMETHYST-DN), conducted at 48 sites in Europe from June 2011 to June 2013 evaluating patiromer in 306 outpatients with type 2 diabetes (estimated glomerular filtration rate, 15 to <60 mL/min/1.73 m2 and serum potassium level >5.0 mEq/L). All patients received RAAS inhibitors prior to and during study treatment. Patients were stratified by baseline serum potassium level into mild or moderate hyperkalemia groups and received 1 of 3 randomized starting doses of patiromer (4.2 g [n = 74], 8.4 g [n = 74], or 12.6 g [n = 74] twice daily [mild hyperkalemia] or 8.4 g [n = 26], 12.6 g [n = 28], or 16.8 g [n = 30] twice daily [moderate hyperkalemia]). Patiromer was titrated to achieve and maintain serum potassium level 5.0 mEq/L or lower. The primary efficacy end point was mean change in serum potassium level from baseline to week 4 or prior to initiation of dose titration. The primary safety end point was adverse events through 52 weeks. Secondary efficacy end points included mean change in serum potassium level through 52 weeks. A total of 306 patients were randomized. The least squares mean reduction from baseline in serum potassium level at week 4 or time of first dose titration in patients with mild hyperkalemia was 0.35 (95% CI, 0.22-0.48) mEq/L for the 4.2 g twice daily starting-dose group, 0.51 (95% CI, 0.38-0.64) mEq/L for the 8.4 g twice daily starting-dose group, and 0.55 (95% CI, 0.42-0.68) mEq/L for the 12.6 g twice daily starting-dose group. In those with moderate hyperkalemia, the reduction was 0.87 (95% CI, 0.60-1.14) mEq/L for the 8.4 g twice daily starting-dose group, 0.97 (95% CI, 0.70-1.23) mEq/L for the 12.6 g twice daily starting-dose group, and 0.92 (95% CI, 0.67-1.17) mEq/L for the 16.8 g twice daily starting-dose group (P < .001 for all changes vs baseline by hyperkalemia starting-dose groups within strata). From week 4 through week 52, statistically significant mean decreases in serum potassium levels were observed at each monthly point in patients with mild and moderate hyperkalemia. Over the 52 weeks, hypomagnesemia (7.2%) was the most common treatment-related adverse event, mild to moderate constipation (6.3%) was the most common gastrointestinal adverse event, and hypokalemia (<3.5 mEq/L) occurred in 5.6% of patients. Among patients with hyperkalemia and diabetic kidney disease, patiromer starting doses of 4.2 to 16.8 g twice daily resulted in statistically significant decreases in serum potassium level after 4 weeks of treatment, lasting through 52 weeks. clinicaltrials.gov Identifier:NCT01371747.

Freeform lens generation for quasi-far-field successive illumination targets

NASA Astrophysics Data System (ADS)

Zhuang, Zhenfeng; Thibault, Simon

2018-07-01

A predefined mapping to tailor one or more freeform surfaces is employed to build a freeform illumination system. The emergent rays from the light source corresponding to the prescribed target mesh for a pre-determined lighting distance are mapped by a point-to-point algorithm with respect to the freeform optics, which involves limiting design flexibility. To tackle the problem of design limitation and find the optimum design results, a freeform lens is exploited to produce the desired rectangular illumination distribution at successive target planes at quasi-far-field lighting distances. It is generated using numerical solutions to find out an initial starting point, and an appropriate approach to obtain variables for parameterization of the freeform surface is introduced. The relative standard deviation, which is a useful figure of merit for the analysis, is set up as merit function with respect to illumination non-uniformity at the successive sampled target planes. Therefore, the irradiance distribution in terms of the specific lighting distance range can be ensured by the proposed scheme. A design example of a freeform illumination system, composed of a spherical surface and a freeform surface, is given to produce desired irradiance distribution within the lighting distance range. An optical performance with low non-uniformity and high efficiency is achieved. Compared with the conventional approach, the uniformity of the sampled targets is dramatically enhanced; meanwhile, a design result with a large tolerance of LED size is offered.

Acoustic and Perceptual Effects of Left–Right Laryngeal Asymmetries Based on Computational Modeling

PubMed Central

Samlan, Robin A.; Story, Brad H.; Lotto, Andrew J.; Bunton, Kate

2015-01-01

Purpose Computational modeling was used to examine the consequences of 5 different laryngeal asymmetries on acoustic and perceptual measures of vocal function. Method A kinematic vocal fold model was used to impose 5 laryngeal asymmetries: adduction, edge bulging, nodal point ratio, amplitude of vibration, and starting phase. Thirty /a/ and /I/ vowels were generated for each asymmetry and analyzed acoustically using cepstral peak prominence (CPP), harmonics-to-noise ratio (HNR), and 3 measures of spectral slope (H1*-H2*, B0-B1, and B0-B2). Twenty listeners rated voice quality for a subset of the productions. Results Increasingly asymmetric adduction, bulging, and nodal point ratio explained significant variance in perceptual rating (R2 = .05, p < .001). The same factors resulted in generally decreasing CPP, HNR, and B0-B2 and in increasing B0-B1. Of the acoustic measures, only CPP explained significant variance in perceived quality (R2 = .14, p < .001). Increasingly asymmetric amplitude of vibration or starting phase minimally altered vocal function or voice quality. Conclusion Asymmetries of adduction, bulging, and nodal point ratio drove acoustic measures and perception in the current study, whereas asymmetric amplitude of vibration and starting phase demonstrated minimal influence on the acoustic signal or voice quality. PMID:24845730

Numerical simulation the pollutants transport in the Lake base on remote sensing image with Lattice Boltzmann Method

NASA Astrophysics Data System (ADS)

Qiao, Y.

2013-12-01

As China's economic development, water pollution incidents happened frequently. For example, the cyanobacterial bloom events repeatedly occur in Taihu Lake. In this research, we investigate the pollutants solute transport start at different points, such as the eutrophication substances Nitrogen and Phosphorus et al, with the Lattice Boltzmann Method (LBM) performed on real pore geometries. The LBM has emerged as a powerful tool for simulating the behaviour of multi-component fluid systems in complex pore networks. We will build a quick response simulation system, which is base on the high resolution GIS figure, using the LBM numerical method.When the start two deferent points at the Meiliang Bay nearby the Wuxi City, it is shown that the pollutants solute can't transport out of the bay to influence the Taihu Lake and the diffusion areas are similar. On the other hand, when the start point at central region of the Taihu Lake, it is found that the pollutants solute covered the almost whole area of the lake and the cyanobacterial bloom with good condition. In the same way, if the cyanobacterial bloom transport in the central area, then it will pollute the whole Taihu Lake. Therefore, when we monitor and deal with the eutrophication substances, we need to focus on the central area of lake.

Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application.

PubMed

Meng, Ying; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Chufo, Akiber; Jaffar, Muhammad; Li, Xiujin

2014-11-01

Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L(-1), the start-up would go well using lower F/M ratio of 0.5-0.7. The OLR 7.0 gCOD L(-1) day(-1) was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53% and biomethane yield of 3.5 ± 0.2 L gCOD(-1) were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L(-1) day(-1), and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m(3) volume) with biogas production of 1.0-3.8 m(3) m(-3) day(-1).

Early Brain Damage and the Development of Motor Behavior in Children: Clues for Therapeutic Intervention?

PubMed Central

Hadders-Algra, Mijna

2001-01-01

The Neuronal Group Selection Theory (NGST) could offer new insights into the mechanisms directing motor disorders, such as cerebral palsy and developmental coordination disorder. According to NGST, normal motor development is characterized by two phases of variability. Variation is not at random but determined by criteria set by genetic information. Development starts with the phase of primary variability,during which variation in motor behavior is not geared to external conditions. At function-specific ages secondary variability starts, during which motor performance can be adapted to specific situations. In both forms, of variability, selection on the basis of afferent information plays a significant role. From the NGST point of view, children with pre- or perinatally acquired brain damage, such as children with cerebral palsy and part of the children with developmental coordination disorder, suffer from stereotyped motor behavior, produced by a limited repertoire or primary (sub)cortical neuronal networks. These children also have roblems in selecting the most efficient neuronal activity, due to deficits in the processing of sensory information. Therefore, NGST suggests that intervention in these children at early age should aim at an enlargement of the primary neuronal networks. With increasing age, the emphasis of intervention could shift to the provision of ample opportunities for active practice, which might form a compensation for the impaired selection. PMID:11530887

Production of the Marine Carotenoid Astaxanthin by Metabolically Engineered Corynebacterium glutamicum.

PubMed

Henke, Nadja A; Heider, Sabine A E; Peters-Wendisch, Petra; Wendisch, Volker F

2016-06-30

Astaxanthin, a red C40 carotenoid, is one of the most abundant marine carotenoids. It is currently used as a food and feed additive in a hundred-ton scale and is furthermore an attractive component for pharmaceutical and cosmetic applications with antioxidant activities. Corynebacterium glutamicum, which naturally synthesizes the yellow C50 carotenoid decaprenoxanthin, is an industrially relevant microorganism used in the million-ton amino acid production. In this work, engineering of a genome-reduced C. glutamicum with optimized precursor supply for astaxanthin production is described. This involved expression of heterologous genes encoding for lycopene cyclase CrtY, β-carotene ketolase CrtW, and hydroxylase CrtZ. For balanced expression of crtW and crtZ their translation initiation rates were varied in a systematic approach using different ribosome binding sites, spacing, and translational start codons. Furthermore, β-carotene ketolases and hydroxylases from different marine bacteria were tested with regard to efficient astaxanthin production in C. glutamicum. In shaking flasks, the C. glutamicum strains developed here overproduced astaxanthin with volumetric productivities up to 0.4 mg·L(-1)·h(-1) which are competitive with current algae-based production. Since C. glutamicum can grow to high cell densities of up to 100 g cell dry weight (CDW)·L(-1), the recombinant strains developed here are a starting point for astaxanthin production by C. glutamicum.

Production of the Marine Carotenoid Astaxanthin by Metabolically Engineered Corynebacterium glutamicum

PubMed Central

Henke, Nadja A.; Heider, Sabine A. E.; Peters-Wendisch, Petra; Wendisch, Volker F.

2016-01-01

Astaxanthin, a red C40 carotenoid, is one of the most abundant marine carotenoids. It is currently used as a food and feed additive in a hundred-ton scale and is furthermore an attractive component for pharmaceutical and cosmetic applications with antioxidant activities. Corynebacterium glutamicum, which naturally synthesizes the yellow C50 carotenoid decaprenoxanthin, is an industrially relevant microorganism used in the million-ton amino acid production. In this work, engineering of a genome-reduced C. glutamicum with optimized precursor supply for astaxanthin production is described. This involved expression of heterologous genes encoding for lycopene cyclase CrtY, β-carotene ketolase CrtW, and hydroxylase CrtZ. For balanced expression of crtW and crtZ their translation initiation rates were varied in a systematic approach using different ribosome binding sites, spacing, and translational start codons. Furthermore, β-carotene ketolases and hydroxylases from different marine bacteria were tested with regard to efficient astaxanthin production in C. glutamicum. In shaking flasks, the C. glutamicum strains developed here overproduced astaxanthin with volumetric productivities up to 0.4 mg·L−1·h−1 which are competitive with current algae-based production. Since C. glutamicum can grow to high cell densities of up to 100 g cell dry weight (CDW)·L−1, the recombinant strains developed here are a starting point for astaxanthin production by C. glutamicum. PMID:27376307

Improving the Efficiency of Physical Examination Services

PubMed Central

Chih, Mingchang; Bair, Aaron E.

2009-01-01

The objective of our project was to improve the efficiency of the physical examination screening service of a large hospital system. We began with a detailed simulation model to explore the relationships between four performance measures and three decision factors. We then attempted to identify the optimal physician inquiry starting time by solving a goal-programming problem, where the objective function includes multiple goals. One of our simulation results shows that the proposed optimal physician inquiry starting time decreased patient wait times by 50% without increasing overall physician utilization. Electronic supplementary material  The online version of this article (doi:10.1007/s10916-009-9271-z) contains supplementary material, which is available to authorized users. PMID:20703912

Preparing for Workplace Numeracy: A Modelling Perspective

ERIC Educational Resources Information Center

Wake, Geoff

2015-01-01

The starting point of this article is the question, "how might we inform an epistemology of numeracy from the point of view of better preparing young people for workplace competence?" To inform thinking illustrative data from two projects that researched into mathematics in workplace activity and the teaching and learning of modelling in…

Replacement Planning: A Starting Point for Succession Planning and Talent Management

ERIC Educational Resources Information Center

Rothwell, William J.

2011-01-01

Replacement planning is a process of identifying short-term or long-term backups so that organizations have people who can assume responsibility for critical positions during emergencies. Individuals identified as "replacements" are not promised promotions; rather, they are prepared to the point where they can assume a critical position long…

40 CFR 1054.145 - Are there interim provisions that apply only for a limited time?

Code of Federal Regulations, 2010 CFR

2010-07-01

... scheduled emission-related maintenance falls within 10 hours of a test point, delay the maintenance until the engine reaches the test point. Measure emissions before and after peforming the maintenance. Use... example, for the fuel line permeation standards starting in 2012, equipment manufacturers may order a...

Stabilizing Crystal Oscillators With Melting Metals

NASA Technical Reports Server (NTRS)

Stephens, J. B.; Miller, C. G.

1984-01-01

Heat of fusion provides extended period of constant temperature and frequency. Crystal surrounded by metal in spherical container. As outside temperature rises to melting point of metal, metal starts to liquefy; but temperature stays at melting point until no solid metal remains. Potential terrestrial applications include low-power environmental telemetering transmitters and instrumentation transmitters for industrial processes.

Fractured Connections: Migration and Holistic Models of Counselling

ERIC Educational Resources Information Center

Wright, Jeannie; Lang, Steve K. W.; Cornforth, Sue

2011-01-01

In this article we aim to explore those points at which migrant identity and landscape intersect. We also consider implications for holistic models of counselling with migrant groups. The New Zealand migration literature was the starting point to consider how and why the experience of migration has been studied. We asked how collective biography…

Indentations and Starting Points in Traveling Sales Tour Problems: Implications for Theory

ERIC Educational Resources Information Center

MacGregor, James N.

2012-01-01

A complete, non-trivial, traveling sales tour problem contains at least one "indentation", where nodes in the interior of the point set are connected between two adjacent nodes on the boundary. Early research reported that human tours exhibited fewer such indentations than expected. A subsequent explanation proposed that this was because…

Homogeneity of Moral Judgment? Apprentices Solving Business Conflicts.

ERIC Educational Resources Information Center

Beck, Klaus; Heinrichs, Karin; Minnameier, Gerhard; Parche-Kawik, Kirsten

In an ongoing longitudinal study that started in 1994, the moral development of business apprentices is being studied. The focal point of this project is a critical analysis of L. Kohlberg's thesis of homogeneity, according to which people should judge every moral issue from the point of view of their "modal" stage (the most frequently…

MOLECULAR VACUUM PUMP

DOEpatents

Eckberg, E.E.

1960-09-27

A multiple molecular vacuum pump capable of producing a vacuum of the order of 10/sup -9/ mm Hg is described. The pump comprises a casing of an aggregate of paired and matched cylindrical plates, a recessed portion on one face of each plate concentrically positioned formed by a radially extending wall and matching the similarly recessed portion of its twin plate of that pair of plates and for all paired and matched plates; a plurality of grooves formed in the radially extending walls of each and all recesses progressing in a spiral manner from their respective starting points out at the periphery of the recess inwardly to the central area; a plurality of rotors rotatably mounted to closely occupy the spaces as presented by the paired and matched recesses between all paired plates; a hollowed drive-shaft perforated at points adjacent to the termini of all spiral grooves; inlet ports at the starting points of all grooves and through all plates at common points to each respectively; and a common outlet passage presented by the hollow portion of the perforated hollowed drive-shaft of the molecular pump. (AEC)

Efficiency transfer using the GEANT4 code of CERN for HPGe gamma spectrometry.

PubMed

Chagren, S; Tekaya, M Ben; Reguigui, N; Gharbi, F

2016-01-01

In this work we apply the GEANT4 code of CERN to calculate the peak efficiency in High Pure Germanium (HPGe) gamma spectrometry using three different procedures. The first is a direct calculation. The second corresponds to the usual case of efficiency transfer between two different configurations at constant emission energy assuming a reference point detection configuration and the third, a new procedure, consists on the transfer of the peak efficiency between two detection configurations emitting the gamma ray in different energies assuming a "virtual" reference point detection configuration. No pre-optimization of the detector geometrical characteristics was performed before the transfer to test the ability of the efficiency transfer to reduce the effect of the ignorance on their real magnitude on the quality of the transferred efficiency. The obtained and measured efficiencies were found in good agreement for the two investigated methods of efficiency transfer. The obtained agreement proves that Monte Carlo method and especially the GEANT4 code constitute an efficient tool to obtain accurate detection efficiency values. The second investigated efficiency transfer procedure is useful to calibrate the HPGe gamma detector for any emission energy value for a voluminous source using one point source detection efficiency emitting in a different energy as a reference efficiency. The calculations preformed in this work were applied to the measurement exercise of the EUROMET428 project. A measurement exercise where an evaluation of the full energy peak efficiencies in the energy range 60-2000 keV for a typical coaxial p-type HpGe detector and several types of source configuration: point sources located at various distances from the detector and a cylindrical box containing three matrices was performed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Musical Probabilities, Abductive Reasoning, and Brain Mechanisms: Extended Perspective of "A Priori" Listening to Music within the Creative Cognition Approach

ERIC Educational Resources Information Center

Schmidt, Sebastian; Troge, Thomas A.; Lorrain, Denis

2013-01-01

A theory of listening to music is proposed. It suggests that, for listeners, the process of prediction is the starting point to experiencing music. This implies that perception of music starts through both a predisposed and an experience-based extrapolation into the future (this is labeled "a priori" listening). Indications for this…

Making Space for Children: A Toolkit for Starting a Child Care Facilities Fund. Starting Points: Meeting the Needs of Our Youngest Children.

ERIC Educational Resources Information Center

Kershaw, Amy

To address the growing demand for high-quality child care, many communities are seeking to develop specialized child care facilities funds to build new, and improve the quality of existing, child care programs. This toolkit is designed for policymakers, nonprofit leaders, child care providers, and others interested in increasing access to…

Starting School at a Disadvantage: The School Readiness of Poor Children. The Social Genome Project

ERIC Educational Resources Information Center

Isaacs, Julia B.

2012-01-01

Poor children in the United States start school at a disadvantage in terms of their early skills, behaviors, and health. Fewer than half (48 percent) of poor children are ready for school at age five, compared to 75 percent of children from families with moderate and high income, a 27 percentage point gap. This paper examines the reasons why poor…

The impact of a community-led program promoting weight loss and healthy living in Aboriginal communities: the New South Wales Knockout Health Challenge.

PubMed

Passmore, Erin; Shepherd, Brooke; Milat, Andrew; Maher, Louise; Hennessey, Kiel; Havrlant, Rachael; Maxwell, Michelle; Hodge, Wendy; Christian, Fiona; Richards, Justin; Mitchell, Jo

2017-12-13

Aboriginal people in Australia experience significant health burden from chronic disease. There has been limited research to identify effective healthy lifestyle programs to address risk factors for chronic disease among Aboriginal people. The Knockout Health Challenge is a community-led healthy lifestyle program for Aboriginal communities across New South Wales, Australia. An evaluation of the 2013 Knockout Health Challenge was undertaken. Participants' self-reported physical activity and diet were measured at four time points - at the start and end of the Challenge (via paper form), and 5 and 9 months after the Challenge (via telephone survey). Participants' weight was measured objectively at the start and end of the Challenge, and self-reported (via telephone survey) 5 and 9 months after the Challenge. Changes in body composition, physical activity and diet between time points were analysed using linear mixed models. As part of the telephone survey participants were also asked to identify other impacts of the Challenge; these were analysed descriptively (quantitative items) and thematically (qualitative items). A total of 586 people registered in 22 teams to participate in the Challenge. The mean weight at the start was 98.54kg (SD 22.4), and 94% of participants were overweight or obese. Among participants who provided data at all four time points (n=122), the mean weight loss from the start to the end of the Challenge was 2.3kg (95%CI -3.0 to -1.9, p<0.001), and from the start to 9 months after the Challenge was 2.3kg (95%CI -3.3 to -1.3, p<0.001). Body mass index decreased by an average of 0.9kg/m 2 (95%CI -1.0 to -0.7, p<0.001) from the start to the end of the Challenge, and 0.8kg/m 2 (95%CI -1.2 to -0.4, p<0.001) 9 months after. At the end of the Challenge, participants reported they were more physically active and had increased fruit and vegetable consumption compared with the start of the Challenge, and identified a range of other positive impacts. The Challenge was effective in reducing weight and promoting healthy lifestyles among Aboriginal people across New South Wales, and has potential to contribute to closing the health gap between Aboriginal and non-Aboriginal people.

Francis-99: Transient CFD simulation of load changes and turbine shutdown in a model sized high-head Francis turbine

NASA Astrophysics Data System (ADS)

Mössinger, Peter; Jester-Zürker, Roland; Jung, Alexander

2017-01-01

With increasing requirements for hydropower plant operation due to intermittent renewable energy sources like wind and solar, numerical simulations of transient operations in hydraulic turbo machines become more important. As a continuation of the work performed for the first workshop which covered three steady operating conditions, in the present paper load changes and a shutdown procedure are investigated. The findings of previous studies are used to create a 360° model and compare measurements with simulation results for the operating points part load, high load and best efficiency. A mesh motion procedure is introduced, allowing to represent moving guide vanes for load changes from best efficiency to part load and high load. Additionally an automated re-mesh procedure is added for turbine shutdown to ensure reliable mesh quality during guide vane closing. All three transient operations are compared to PIV velocity measurements in the draft tube and pressure signals in the vaneless space. Simulation results of axial velocity distributions for all three steady operation points, during both load changes and for the shutdown correlated well with the measurement. An offset at vaneless space pressure is found to be a result of guide vane corrections for the simulation to ensure similar velocity fields. Short-time Fourier transformation indicating increasing amplitudes and frequencies at speed-no load conditions. Further studies will discuss the already measured start-up procedure and investigate the necessity to consider the hydraulic system dynamics upstream of the turbine by means of a 1D3D coupling between the 3D flow field and a 1D system model.

Testing second order cyclostationarity in the squared envelope spectrum of non-white vibration signals

NASA Astrophysics Data System (ADS)

Borghesani, P.; Pennacchi, P.; Ricci, R.; Chatterton, S.

2013-10-01

Cyclostationary models for the diagnostic signals measured on faulty rotating machineries have proved to be successful in many laboratory tests and industrial applications. The squared envelope spectrum has been pointed out as the most efficient indicator for the assessment of second order cyclostationary symptoms of damages, which are typical, for instance, of rolling element bearing faults. In an attempt to foster the spread of rotating machinery diagnostics, the current trend in the field is to reach higher levels of automation of the condition monitoring systems. For this purpose, statistical tests for the presence of cyclostationarity have been proposed during the last years. The statistical thresholds proposed in the past for the identification of cyclostationary components have been obtained under the hypothesis of having a white noise signal when the component is healthy. This need, coupled with the non-white nature of the real signals implies the necessity of pre-whitening or filtering the signal in optimal narrow-bands, increasing the complexity of the algorithm and the risk of losing diagnostic information or introducing biases on the result. In this paper, the authors introduce an original analytical derivation of the statistical tests for cyclostationarity in the squared envelope spectrum, dropping the hypothesis of white noise from the beginning. The effect of first order and second order cyclostationary components on the distribution of the squared envelope spectrum will be quantified and the effectiveness of the newly proposed threshold verified, providing a sound theoretical basis and a practical starting point for efficient automated diagnostics of machine components such as rolling element bearings. The analytical results will be verified by means of numerical simulations and by using experimental vibration data of rolling element bearings.

Sampling bird communities in bottomland hardwood forests of the Mississippi Alluvial Valley: Number of points visited versus number of visits to a point

USGS Publications Warehouse

Twedt, D.J.; Smith, W.P.; Cooper, R.J.; Ford, R.P.; Hamel, P.B.; Wiedenfeld, D.A.; Smith, Winston Paul

1993-01-01

Within each of 4 forest stands on Delta Experimental Forest (DEF), 25 points were visited 5 to 7 times from 8 May to 21 May 1991, and 6 times from 30 May to 12 June 1992. During each visit to a point, all birds detected, visuallyor aurally, at any distance were recorded during a 4-minute interval. Using these data, our objectives were to recommend the number of point counts and the number of visits to a point which provide the greatest efficiency for estimating the cumulative number of species in bottomland hardwood forest stands within the Mississippi Alluvial Valley, and to ascertain if increasing the number of visits to points is equivalent to adding more points. Because the total number of species detected in DEF were different between years, 39 species in 1991 and 55 species in 1992, we considered each year independently. Within each stand, we obtained bootstrap estimates of the mean cumulative number of species obtained from all possible combinations of six points and six visits (i.e., 36 means/stand). These bootstrap estimates were subjected to ANOVA; we modelled cumulative number of species as a function of the number of points visited, the number of visits to each point, and their interaction. As part of the same ANOVA we made an a priori, simultaneous comparison of the 15 possible reciprocal treatments (i.e., 1 point-2 visits vs. 2 points-1 visit, etc.). Results of analyses for each year were similar. Although no interaction was detected between the number of points and the number of visits, when reciprocals were compared, more points visited yielded significantly greater cumulative number of species than more visits to each point. Significant differences were detected among both the number of points visited and among the number of visits to a point. Scheffe's test of differences among means indicated that the cumulative number of species increased significantly with each added point, through five points, but six points did not differ from five points in 1991. Similarly, the cumulative number of species increased significantlywith each revisit, up to four visits, but four visits did not differ significantly from five visits. Starting with one point, which yielded about 33 percent of the total species pool when averaged among one through six points, each subsequent point resulted in an increase of about 9 percent, 5 percent, 3 percent, and 3 percent, respectively. Each sequential increase in the number of visits, however, only resulted in increases of 7 percent, 4 percent, 2 percent, and 2 percent of the total species pool.

A 190 mV start-up and 59.2% efficiency CMOS gate boosting voltage doubler charge pump in 0.18 µm standard CMOS process for energy harvesting

NASA Astrophysics Data System (ADS)

Yoshida, Minori; Miyaji, Kousuke

2018-04-01

A start-up charge pump circuit for an extremely low input voltage (V IN) is proposed and demonstrated. The proposed circuit uses an inverter level shifter to generate a 2V IN voltage swing to the gate of both main NMOS and PMOS power transistors in a charge pump to reduce the channel resistance. The proposed circuit is fully implemented in a standard 0.18 µm CMOS process, and the measurement result shows that a minimum input voltage of 190 mV is achieved and output power increases by 181% compared with the conventional forward-body-bias scheme at a 300 mV input voltage. The proposed scheme achieves a maximum efficiency of 59.2% when the input voltage is 390 mV and the output current is 320 nA. The proposed circuit is suitable as a start-up circuit in ultralow power energy harvesting power management applications to boost-up from below threshold voltage.

Aerodynamic side-force alleviator means

NASA Technical Reports Server (NTRS)

Rao, D. M. (Inventor)

1980-01-01

An apparatus for alleviating high angle of attack side force on slender pointed cylindrical forebodies such as fighter aircraft, missiles and the like is described. A symmetrical pair of helical separation trips was employed to disrupt the leeside vortices normally attained. The symmetrical pair of trips starts at either a common point or at space points on the upper surface of the forebody and extends along separate helical paths along the circumference of the forebody.

A robust automatic phase correction method for signal dense spectra

NASA Astrophysics Data System (ADS)

Bao, Qingjia; Feng, Jiwen; Chen, Li; Chen, Fang; Liu, Zao; Jiang, Bin; Liu, Chaoyang

2013-09-01

A robust automatic phase correction method for Nuclear Magnetic Resonance (NMR) spectra is presented. In this work, a new strategy combining ‘coarse tuning' with ‘fine tuning' is introduced to correct various spectra accurately. In the ‘coarse tuning' procedure, a new robust baseline recognition method is proposed for determining the positions of the tail ends of the peaks, and then the preliminary phased spectra are obtained by minimizing the objective function based on the height difference of these tail ends. After the ‘coarse tuning', the peaks in the preliminary corrected spectra can be categorized into three classes: positive, negative, and distorted. Based on the classification result, a new custom negative penalty function used in the step of ‘fine tuning' is constructed to avoid the negative peak points in the spectra excluded in the negative peaks and distorted peaks. Finally, the fine phased spectra can be obtained by minimizing the custom negative penalty function. This method is proven to be very robust for it is tolerant to low signal-to-noise ratio, large baseline distortion and independent of the starting search points of phasing parameters. The experimental results on both 1D metabonomics spectra with over-crowded peaks and 2D spectra demonstrate the high efficiency of this automatic method.

Fermentation of dilute acid pretreated Populus by Clostridium thermocellum, Caldicellulosiruptor bescii, and Caldicellulosiruptor obsidiansis

DOE PAGES

Yee, Kelsey L.; Rodriguez, Jr., Miguel; Hamilton, Choo Yieng; ...

2015-07-25

Consolidated bioprocessing (CBP), which merges enzyme production, biomass hydrolysis, and fermentation into a single step, has the potential to become an efficient and economic strategy for the bioconversion of lignocellulosic feedstocks to transportation fuels or chemicals. In this study, we evaluated Clostridium thermocellum, Caldicellulosiruptor bescii, and Caldicellulosiruptor obsidiansis, three , thermophilic,cellulolytic, mixed-acid fermenting candidate CBP microorganisms, for their fermentation capabilities using dilute acid pretreated Populus as a model biomass feedstock. Under pH controlled, anaerobic fermentation conditions, each candidate successfully digested a minimum of 75% of the cellulose from dilute acid pretreated Populus, as indicated by an increase in planktonic cellsmore » and end-product metabolites and a concurrent decrease in glucan content. C. thermocellum, which employs a cellulosomal approach to biomass degradation, required 120 hours to achieve 75% cellulose utilization. In contrast, the non-cellulosomal, secreted hydrolytic enzyme system of the Caldicellulosiruptor sp. required 300 hours to achieve similar results. End-point fermentation conversions for C. thermocellum, C. bescii, and C. obsidiansis were determined to be 0.29, 0.34, and 0.38 grams of total metabolites per gram of loaded glucan, respectively. This data provide a starting point for future strain engineering efforts that can serve to improve the biomass fermentation capabilities of these three promising candidate CBP platforms.« less

Fermentation of dilute acid pretreated Populus by Clostridium thermocellum, Caldicellulosiruptor bescii, and Caldicellulosiruptor obsidiansis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yee, Kelsey L.; Rodriguez, Jr., Miguel; Hamilton, Choo Yieng

Consolidated bioprocessing (CBP), which merges enzyme production, biomass hydrolysis, and fermentation into a single step, has the potential to become an efficient and economic strategy for the bioconversion of lignocellulosic feedstocks to transportation fuels or chemicals. In this study, we evaluated Clostridium thermocellum, Caldicellulosiruptor bescii, and Caldicellulosiruptor obsidiansis, three , thermophilic,cellulolytic, mixed-acid fermenting candidate CBP microorganisms, for their fermentation capabilities using dilute acid pretreated Populus as a model biomass feedstock. Under pH controlled, anaerobic fermentation conditions, each candidate successfully digested a minimum of 75% of the cellulose from dilute acid pretreated Populus, as indicated by an increase in planktonic cellsmore » and end-product metabolites and a concurrent decrease in glucan content. C. thermocellum, which employs a cellulosomal approach to biomass degradation, required 120 hours to achieve 75% cellulose utilization. In contrast, the non-cellulosomal, secreted hydrolytic enzyme system of the Caldicellulosiruptor sp. required 300 hours to achieve similar results. End-point fermentation conversions for C. thermocellum, C. bescii, and C. obsidiansis were determined to be 0.29, 0.34, and 0.38 grams of total metabolites per gram of loaded glucan, respectively. This data provide a starting point for future strain engineering efforts that can serve to improve the biomass fermentation capabilities of these three promising candidate CBP platforms.« less

Efficiency of ITS Sequences for DNA Barcoding in Passiflora (Passifloraceae)

PubMed Central

Giudicelli, Giovanna Câmara; Mäder, Geraldo; de Freitas, Loreta Brandão

2015-01-01

DNA barcoding is a technique for discriminating and identifying species using short, variable, and standardized DNA regions. Here, we tested for the first time the performance of plastid and nuclear regions as DNA barcodes in Passiflora. This genus is a largely variable, with more than 900 species of high ecological, commercial, and ornamental importance. We analyzed 1034 accessions of 222 species representing the four subgenera of Passiflora and evaluated the effectiveness of five plastid regions and three nuclear datasets currently employed as DNA barcodes in plants using barcoding gap, applied similarity-, and tree-based methods. The plastid regions were able to identify less than 45% of species, whereas the nuclear datasets were efficient for more than 50% using “best match” and “best close match” methods of TaxonDNA software. All subgenera presented higher interspecific pairwise distances and did not fully overlap with the intraspecific distance, and similarity-based methods showed better results than tree-based methods. The nuclear ribosomal internal transcribed spacer 1 (ITS1) region presented a higher discrimination power than the other datasets and also showed other desirable characteristics as a DNA barcode for this genus. Therefore, we suggest that this region should be used as a starting point to identify Passiflora species. PMID:25837628

Childhood amblyopia: current management and new trends

PubMed Central

Tailor, Vijay; Bossi, Manuela; Greenwood, John A.; Dahlmann-Noor, Annegret

2016-01-01

Abstract Introduction or background With a prevalence of 2–5%, amblyopia is the most common vision deficit in children in the UK and the second most common cause of functional low vision in children in low-income countries. Sources of data Pubmed, Cochrane library and clinical trial registries (clinicaltrials.gov, ISRCTN, UKCRN portfolio database). Areas of agreement Screening and treatment at the age of 4–5 years are cost efficient and clinically effective. Optical treatment (glasses) alone can improve visual acuity, with residual amblyopia treated by part-time occlusion or pharmacological blurring of the better-seeing eye. Treatment after the end of the conventional ‘critical period’ can improve vision, but in strabismic amblyopia carries a low risk of double vision. Areas of controversy It is not clear whether earlier vision screening would be cost efficient and associated with better outcomes. Optimization of treatment by individualized patching regimes or early start of occlusion, and novel binocular treatment approaches may enhance adherence to treatment, provide better outcomes and shorten treatment duration. Growing points Binocular treatments for amblyopia. Areas timely for developing research Impact of amblyopia on education and quality of life; optimal screening timing and tests; optimal administration of conventional treatments; development of child-friendly, effective and safe binocular treatments. PMID:27543498

A bicriteria heuristic for an elective surgery scheduling problem.

PubMed

Marques, Inês; Captivo, M Eugénia; Vaz Pato, Margarida

2015-09-01

Resource rationalization and reduction of waiting lists for surgery are two main guidelines for hospital units outlined in the Portuguese National Health Plan. This work is dedicated to an elective surgery scheduling problem arising in a Lisbon public hospital. In order to increase the surgical suite's efficiency and to reduce the waiting lists for surgery, two objectives are considered: maximize surgical suite occupation and maximize the number of surgeries scheduled. This elective surgery scheduling problem consists of assigning an intervention date, an operating room and a starting time for elective surgeries selected from the hospital waiting list. Accordingly, a bicriteria surgery scheduling problem arising in the hospital under study is presented. To search for efficient solutions of the bicriteria optimization problem, the minimization of a weighted Chebyshev distance to a reference point is used. A constructive and improvement heuristic procedure specially designed to address the objectives of the problem is developed and results of computational experiments obtained with empirical data from the hospital are presented. This study shows that by using the bicriteria approach presented here it is possible to build surgical plans with very good performance levels. This method can be used within an interactive approach with the decision maker. It can also be easily adapted to other hospitals with similar scheduling conditions.

A fully automated primary screening system for the discovery of therapeutic antibodies directly from B cells.

PubMed

Tickle, Simon; Howells, Louise; O'Dowd, Victoria; Starkie, Dale; Whale, Kevin; Saunders, Mark; Lee, David; Lightwood, Daniel

2015-04-01

For a therapeutic antibody to succeed, it must meet a range of potency, stability, and specificity criteria. Many of these characteristics are conferred by the amino acid sequence of the heavy and light chain variable regions and, for this reason, can be screened for during antibody selection. However, it is important to consider that antibodies satisfying all these criteria may be of low frequency in an immunized animal; for this reason, it is essential to have a mechanism that allows for efficient sampling of the immune repertoire. UCB's core antibody discovery platform combines high-throughput B cell culture screening and the identification and isolation of single, antigen-specific IgG-secreting B cells through a proprietary technique called the "fluorescent foci" method. Using state-of-the-art automation to facilitate primary screening, extremely efficient interrogation of the natural antibody repertoire is made possible; more than 1 billion immune B cells can now be screened to provide a useful starting point from which to identify the rare therapeutic antibody. This article will describe the design, construction, and commissioning of a bespoke automated screening platform and two examples of how it was used to screen for antibodies against two targets. © 2014 Society for Laboratory Automation and Screening.

A High Proliferation Rate is Critical for Reproducible and Standardized Embryoid Body Formation from Laminin-521-Based Human Pluripotent Stem Cell Cultures.

PubMed

Dziedzicka, Dominika; Markouli, Christina; Barbé, Lise; Spits, Claudia; Sermon, Karen; Geens, Mieke

2016-12-01

When aiming for homogenous embryoid body (EB) differentiation, the use of equal-sized EBs is required to avoid a size-induced differentiation bias. In this study we developed an efficient and standardized EB formation protocol for human pluripotent stem cells (hPSC) cultured in a laminin-521-based xeno-free system. As the cell proliferation rate of the cells growing on laminin-521 strongly affected the efficiency of aggregate formation, we found that recently passaged cells, as well as the addition of ROCK inhibitor, were essential for reproducible EB formation from hPSC single-cell suspensions. EBs could be obtained in a variety of differentiation media, in 96-well round-bottom plates and in hanging drops. Gene expression studies on differentially sized EBs from three individual human embryonic stem cell lines demonstrated that the medium used for differentiation influenced the differentiation outcome to a much greater extent than the number of cells used for the initial EB formation. Our findings give a new insight into factors that influence the EB formation and differentiation process. This optimized method allows us to easily manipulate EB formation and provide an excellent starting point for downstream EB-based differentiation protocols.

Cationic polymers for DNA origami coating - examining their binding efficiency and tuning the enzymatic reaction rates.

PubMed

Kiviaho, Jenny K; Linko, Veikko; Ora, Ari; Tiainen, Tony; Järvihaavisto, Erika; Mikkilä, Joona; Tenhu, Heikki; Nonappa; Kostiainen, Mauri A

2016-06-02

DNA origamis are fully tailored, programmable, biocompatible and readily functionalizable nanostructures that provide an excellent foundation for the development of sophisticated drug-delivery systems. However, the DNA origami objects suffer from certain drawbacks such as low cell-transfection rates and low stability. A great deal of studies on polymer-based transfection agents, mainly focusing on polyplex formation and toxicity, exists. In this study, the electrostatic binding between a brick-like DNA origami and cationic block-copolymers was explored. The effect of the polymer structure on the binding was investigated and the toxicity of the polymer-origami complexes evaluated. The study shows that all of the analyzed polymers had a suitable binding efficiency irrespective of the block structure. It was also observed that the toxicity of polymer-origami complexes was insignificant at the biologically relevant concentration levels. Besides brick-like DNA origamis, tubular origami carriers equipped with enzymes were also coated with the polymers. By adjusting the amount of cationic polymers that cover the DNA structures, we showed that it is possible to control the enzyme kinetics of the complexes. This work gives a starting point for further development of biocompatible and effective polycation-based block copolymers that can be used in coating different DNA origami nanostructures for various bioapplications.

Forward/up directional incompatibilities during cursor placement within graphical user interfaces.

PubMed

Phillips, James G; Triggs, Thomas J; Meehan, James W

2005-05-15

Within graphical user interfaces, an indirect relationship between display and control may lead to directional incompatibilities when a forward mouse movement codes upward cursor motions. However, this should not occur for left/right movements or direct cursor controllers (e.g. touch sensitive screens). In a four-choice reaction time task, 12 participants performed movements from a central start location to a target situated at one of four cardinal points (top, bottom, left, right). A 2 x 2 x 2 design varied directness of controller (moving cursor on computer screen or pen on graphics tablet), compatibility of orientation of cursor controller with screen (horizontal or vertical) and axis of desired cursor motion (left/right or up/down). Incompatibility between orientation of controller and motion of cursor did not affect response latencies, possibly because both forward and upward movements are away from the midline and go up the visual field. However, directional incompatibilities between display and controller led to slower movement with prolonged accelerative phases. Indirect relationships between display and control led to less efficient movements with prolonged decelerative phases and a tendency to undershoot movements along the bottom/top axis. More direct cursor control devices, such as touch sensitive screens, should enhance the efficiency of aspects of cursor trajectories.

Bee Inspired Novel Optimization Algorithm and Mathematical Model for Effective and Efficient Route Planning in Railway System

PubMed Central

Leong, Kah Huo; Abdul-Rahman, Hamzah; Wang, Chen; Onn, Chiu Chuen

2016-01-01

Railway and metro transport systems (RS) are becoming one of the popular choices of transportation among people, especially those who live in urban cities. Urbanization and increasing population due to rapid development of economy in many cities are leading to a bigger demand for urban rail transit. Despite being a popular variant of Traveling Salesman Problem (TSP), it appears that the universal formula or techniques to solve the problem are yet to be found. This paper aims to develop an optimization algorithm for optimum route selection to multiple destinations in RS before returning to the starting point. Bee foraging behaviour is examined to generate a reliable algorithm in railway TSP. The algorithm is then verified by comparing the results with the exact solutions in 10 test cases, and a numerical case study is designed to demonstrate the application with large size sample. It is tested to be efficient and effective in railway route planning as the tour can be completed within a certain period of time by using minimal resources. The findings further support the reliability of the algorithm and capability to solve the problems with different complexity. This algorithm can be used as a method to assist business practitioners making better decision in route planning. PMID:27930659

Bee Inspired Novel Optimization Algorithm and Mathematical Model for Effective and Efficient Route Planning in Railway System.

PubMed

Leong, Kah Huo; Abdul-Rahman, Hamzah; Wang, Chen; Onn, Chiu Chuen; Loo, Siaw-Chuing

2016-01-01

Railway and metro transport systems (RS) are becoming one of the popular choices of transportation among people, especially those who live in urban cities. Urbanization and increasing population due to rapid development of economy in many cities are leading to a bigger demand for urban rail transit. Despite being a popular variant of Traveling Salesman Problem (TSP), it appears that the universal formula or techniques to solve the problem are yet to be found. This paper aims to develop an optimization algorithm for optimum route selection to multiple destinations in RS before returning to the starting point. Bee foraging behaviour is examined to generate a reliable algorithm in railway TSP. The algorithm is then verified by comparing the results with the exact solutions in 10 test cases, and a numerical case study is designed to demonstrate the application with large size sample. It is tested to be efficient and effective in railway route planning as the tour can be completed within a certain period of time by using minimal resources. The findings further support the reliability of the algorithm and capability to solve the problems with different complexity. This algorithm can be used as a method to assist business practitioners making better decision in route planning.

Leader's Handbook for a Nutrition and Food Course. Parent Education in Nutrition and Food: A Series of Ten Lessons for Parents.

ERIC Educational Resources Information Center

Murrah, Pauline

This booklet presents a 10-lesson curriculum guide for teaching mothers of Head Start children to plan, purchase, prepare, and serve food more efficiently and economically. Leaders of programs in nutrition education for Head Start parents must complete a Leaders Training Course, taught by a professional nutritionist or home economist. The first…

Evaluation of the Effects of Head Start Experience in the Area of Self-Concept, Social Skills, and Language Skills. Pre-Publication Draft.

ERIC Educational Resources Information Center

McNamara, J. Regis; And Others

About 180 Negro Head Start children in Dade County, Florida, were tested (1) to discover if the county's program contributed significantly to language skills, social skills, and self-concept development and (2) to determine if an efficient instrument could be developed to measure self-concept in the disadvantaged child. Pretests and posttests used…

Detailed Hydrographic Feature Extraction from High-Resolution LiDAR Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Danny L. Anderson

Detailed hydrographic feature extraction from high-resolution light detection and ranging (LiDAR) data is investigated. Methods for quantitatively evaluating and comparing such extractions are presented, including the use of sinuosity and longitudinal root-mean-square-error (LRMSE). These metrics are then used to quantitatively compare stream networks in two studies. The first study examines the effect of raster cell size on watershed boundaries and stream networks delineated from LiDAR-derived digital elevation models (DEMs). The study confirmed that, with the greatly increased resolution of LiDAR data, smaller cell sizes generally yielded better stream network delineations, based on sinuosity and LRMSE. The second study demonstrates amore » new method of delineating a stream directly from LiDAR point clouds, without the intermediate step of deriving a DEM. Direct use of LiDAR point clouds could improve efficiency and accuracy of hydrographic feature extractions. The direct delineation method developed herein and termed “mDn”, is an extension of the D8 method that has been used for several decades with gridded raster data. The method divides the region around a starting point into sectors, using the LiDAR data points within each sector to determine an average slope, and selecting the sector with the greatest downward slope to determine the direction of flow. An mDn delineation was compared with a traditional grid-based delineation, using TauDEM, and other readily available, common stream data sets. Although, the TauDEM delineation yielded a sinuosity that more closely matches the reference, the mDn delineation yielded a sinuosity that was higher than either the TauDEM method or the existing published stream delineations. Furthermore, stream delineation using the mDn method yielded the smallest LRMSE.« less

Starting Off.

ERIC Educational Resources Information Center

Vanderlinden, Loren

2002-01-01

Discusses concerns about polluted breast milk. Offers research results which support concerns about lead exposure and human beings. Points out that often the benefits of breastfeeding outweigh the risks. (DDR)

From Pong to Pokemon Go, catching the essence of the Internet Gaming Disorder diagnosis

PubMed Central

Carbonell, Xavier

2017-01-01

Taking as a starting point, this commentary proposes some issues regarding the diagnosis of Internet Gaming Disorder discussed in Kuss et al. (2016). In our opinion, the confusion in DSM-5 diagnosis could be due to the weak starting point in building the criteria. The criteria such as functional impairment and stability of the dysfunctional behavior are considered. It is suggested that avatar identification, playing motivations, and types of video games should be considered for diagnosis. The diagnostic process is highly influenced by social context and the rapid development of video game industry. The commentary ends by considering the distinction between online and offline video gaming and the critical consideration of everyday behaviors as being addictive. PMID:28301965

From Pong to Pokemon Go, catching the essence of the Internet Gaming Disorder diagnosis.

PubMed

Carbonell, Xavier

2017-06-01

Taking as a starting point, this commentary proposes some issues regarding the diagnosis of Internet Gaming Disorder discussed in Kuss et al. (2016). In our opinion, the confusion in DSM-5 diagnosis could be due to the weak starting point in building the criteria. The criteria such as functional impairment and stability of the dysfunctional behavior are considered. It is suggested that avatar identification, playing motivations, and types of video games should be considered for diagnosis. The diagnostic process is highly influenced by social context and the rapid development of video game industry. The commentary ends by considering the distinction between online and offline video gaming and the critical consideration of everyday behaviors as being addictive.

Constructing an Efficient Self-Tuning Aircraft Engine Model for Control and Health Management Applications

NASA Technical Reports Server (NTRS)

Armstrong, Jeffrey B.; Simon, Donald L.

2012-01-01

Self-tuning aircraft engine models can be applied for control and health management applications. The self-tuning feature of these models minimizes the mismatch between any given engine and the underlying engineering model describing an engine family. This paper provides details of the construction of a self-tuning engine model centered on a piecewise linear Kalman filter design. Starting from a nonlinear transient aerothermal model, a piecewise linear representation is first extracted. The linearization procedure creates a database of trim vectors and state-space matrices that are subsequently scheduled for interpolation based on engine operating point. A series of steady-state Kalman gains can next be constructed from a reduced-order form of the piecewise linear model. Reduction of the piecewise linear model to an observable dimension with respect to available sensed engine measurements can be achieved using either a subset or an optimal linear combination of "health" parameters, which describe engine performance. The resulting piecewise linear Kalman filter is then implemented for faster-than-real-time processing of sensed engine measurements, generating outputs appropriate for trending engine performance, estimating both measured and unmeasured parameters for control purposes, and performing on-board gas-path fault diagnostics. Computational efficiency is achieved by designing multidimensional interpolation algorithms that exploit the shared scheduling of multiple trim vectors and system matrices. An example application illustrates the accuracy of a self-tuning piecewise linear Kalman filter model when applied to a nonlinear turbofan engine simulation. Additional discussions focus on the issue of transient response accuracy and the advantages of a piecewise linear Kalman filter in the context of validation and verification. The techniques described provide a framework for constructing efficient self-tuning aircraft engine models from complex nonlinear simulations.Self-tuning aircraft engine models can be applied for control and health management applications. The self-tuning feature of these models minimizes the mismatch between any given engine and the underlying engineering model describing an engine family. This paper provides details of the construction of a self-tuning engine model centered on a piecewise linear Kalman filter design. Starting from a nonlinear transient aerothermal model, a piecewise linear representation is first extracted. The linearization procedure creates a database of trim vectors and state-space matrices that are subsequently scheduled for interpolation based on engine operating point. A series of steady-state Kalman gains can next be constructed from a reduced-order form of the piecewise linear model. Reduction of the piecewise linear model to an observable dimension with respect to available sensed engine measurements can be achieved using either a subset or an optimal linear combination of "health" parameters, which describe engine performance. The resulting piecewise linear Kalman filter is then implemented for faster-than-real-time processing of sensed engine measurements, generating outputs appropriate for trending engine performance, estimating both measured and unmeasured parameters for control purposes, and performing on-board gas-path fault diagnostics. Computational efficiency is achieved by designing multidimensional interpolation algorithms that exploit the shared scheduling of multiple trim vectors and system matrices. An example application illustrates the accuracy of a self-tuning piecewise linear Kalman filter model when applied to a nonlinear turbofan engine simulation. Additional discussions focus on the issue of transient response accuracy and the advantages of a piecewise linear Kalman filter in the context of validation and verification. The techniques described provide a framework for constructing efficient self-tuning aircraft engine models from complex nonlinear simulatns.

Ursodeoxycholic Acid for Treatment of Enlarged Polycystic Liver.

PubMed

Iijima, Takashi; Hoshino, Junichi; Suwabe, Tatsuya; Sumida, Keiichi; Mise, Koki; Kawada, Masahiro; Imafuku, Aya; Hayami, Noriko; Hiramatsu, Rikako; Hasegawa, Eiko; Sawa, Naoki; Takaichi, Kenmei; Ubara, Yoshifumi

2016-02-01

Patients with autosomal dominant polycystic kidney disease and polycystic liver disease (PLD) often have elevated serum levels of alkaline phosphatase (ALP) and gamma-glutamyl transpeptidase (GGT). Ursodeoxycholic acid (UDCA) is used to treat biliary tract diseases, but its effect on PLD remains unclear. UDCA was administered for 1 year at a dose of 300 mg daily to seven PLD patients with elevated ALP or GGT levels who were selected for this treatment by experienced clinicians. Laboratory data and liver volumes were compared among three time points: 1 year before UDCA treatment, at the start of UDCA therapy, and 1 year after the start of therapy. Median GGT did not show a significant change between 1 year before UDCA (180 IU/L) and the start of UDCA therapy (209 IU/L), but it decreased significantly to 98 IU/L after 1 year of UDCA therapy (P = 0.015 vs. the start of therapy). ALP showed a significant increase from 1 year before UDCA (456 IU/L) to the start of UDCA therapy (561 IU/L), and then decreased significantly after 1 year of UDCA therapy (364 IU/L). Median liver volume did not show any significant changes among these three time points of assessment. UDCA may be effective for reducing biliary enzyme levels and inhibiting the growth of liver cysts in patients with PLD. © 2015 International Society for Apheresis, Japanese Society for Apheresis, and Japanese Society for Dialysis Therapy.

Starting and Managing a Retail Flower Shop. The Starting and Managing Series, Volume 18.

ERIC Educational Resources Information Center

Krone, Paul R.

This booklet is intended to give a general idea of what is required to set up and manage a flower shop, to point out some of the problems and rewards, and to tell where to find more detailed information. First, an overview of the business is provided, telling the background required in education and experience as well as the amount of profit that…

Reliving the History of Compensatory Education: Policy Choices, Bureaucracy, and the Politicized Role of Science in the Evolution of Head Start

ERIC Educational Resources Information Center

Beatty, Barbara; Zigler, Edward

2012-01-01

In this article, Edward Zigler, interviewed by Barbara Beatty, talks about a turning point in the history of Head Start that reveals how policy choices, bureaucracy, and science came together when he was told to phase out the program in 1970. New to Washington, Zigler learned that President Richard M. Nixon's domestic policy advisor Daniel Patrick…

Next generation internet architecture and cyber-assisted energy efficiency in smart grids of buildings

NASA Astrophysics Data System (ADS)

Peterson, Robb Alex

Northern Minnesota's iron mines are the starting point for the majority of the steel that gets produced in the United States. Their taconite processing plants use heat in furnaces to oxidize and indurate iron in the final stage of making a taconite pellet. Facilities can increase efficiencies when refractory service life is maintained. Efficiencies gained include: less fuel used, better quality control, better furnace control, and less mechanical component maintenance. Furnace refractory linings fail when the cracks that develop in them are uncontrolled or too large. These failures allow heat and gases retained by the lining to reach structural or mechanical components. Furnace control and efficiencies are also compromised when heat and gases are allowed to short circuit or escape the system. These failures are primarily the result of thermal of shock and expansion. It is common place to add stainless steel needle reinforcement to a monolithic refractory in an effort to counteract these effects. This study used several standard ASTM testing procedures to test 65% alumina mullite based refractory samples with 304 and 406 grade stainless steel needles. Mechanical property data gathered was used to analyze performance. The study found that adding reinforcement does not increase initial Compression and Cold Modulus of Ruptures strengths, however, after prolonged heat and thermal shock exposure, needles help maintain integrity and mechanical properties of samples. The study also found that corrosion due to oxidation was a major contributing factor to the way needles performed; and concluded that a concentration of 3% 406 "Alfa 1" stainless steel reinforcing needles added to the working lining of a taconite furnace is recommended.

Perspektiven einer Rezeption neurowissenschaftlicher Erkenntnisse in der Erziehungswissenschaft (Perspectives of an Integration of Neuro-Scientific Findings into Educational Science).

ERIC Educational Resources Information Center

Becker, Nicole

2002-01-01

Sketches the status quo and possible starting points for the adoption of neuro-scientific findings by educational science. Describes the latest developments in U.S. research. Discusses the adoption of these points by German educational science. Outlines the possibilities and limits of an interdisciplinary discourse. (CAJ)

Exploring the influence of context and policy on health district productivity in Cambodia.

PubMed

Ensor, Tim; So, Sovannarith; Witter, Sophie

2016-01-01

Cambodia has been reconstructing its economy and health sector since the end of conflict in the 1990s. There have been gains in life expectancy and increased health expenditure, but Cambodia still lags behind neighbours One factor which may contribute is the efficiency of public health services. This article aims to understand variations in efficiency and the extent to which changes in efficiency are associated with key health policies that have been introduced to strengthen access to health services over the past decade. The analysis makes use of data envelopment analysis (DEA) to measure relative efficiency and changes in productivity and regression analysis to assess the association with the implementation of health policies. Data on 28 operational districts were obtained for 2008-11, focussing on the five provinces selected to represent a range of conditions in Cambodia. DEA was used to calculate efficiency scores assuming constant and variable returns to scale and Malmquist indices to measure productivity changes over time. This analysis was combined with qualitative findings from 17 key informant interviews and 19 in-depth interviews with managers and staff in the same provinces. The DEA results suggest great variation in the efficiency scores and trends of scores of public health services in the five provinces. Starting points were significantly different, but three of the five provinces have improved efficiency considerably over the period. Higher efficiency is associated with more densely populated areas. Areas with health equity funds in Special Operating Agency (SOA) and non-SOA areas are associated with higher efficiency. The same effect is not found in areas only operating voucher schemes. We find that the efficiency score increased by 0.12 the year any of the policies was introduced. This is the first study published on health district productivity in Cambodia. It is one of the few studies in the region to consider the impact of health policy changes on health sector efficiency. The results suggest that the recent health financing reforms have been effective, singly and in combination. This analysis could be extended nationwide and used for targeting of new initiatives. The finding of an association between recent policy interventions and improved productivity of public health services is relevant for other countries planning similar health sector reforms.

A qualitative exploration of attitudes towards alcohol, and the role of parents and peers of two alcohol-attitude-based segments of the adolescent population

PubMed Central

2014-01-01

Background An earlier study using social marketing and audience segmentation distinguished five segments of Dutch adolescents aged 12–18 years based on their attitudes towards alcohol. The present, qualitative study focuses on two of these five segments (‘ordinaries’ and ‘ordinary sobers’) and explores the attitudes of these two segments towards alcohol, and the role of parents and peers in their alcohol use in more detail. Methods This qualitative study was conducted in the province of North-Brabant, the Netherlands. With a 28-item questionnaire, segments of adolescents were identified. From the ordinaries and ordinary sobers who were willing to participate in a focus group, 55 adolescents (30 ordinaries and 25 ordinary sobers) were selected and invited to participate. Finally, six focus groups were conducted with 12–17 year olds, i.e., three interviews with 17 ordinaries and three interviews with 20 ordinary sobers at three different high schools. Results The ordinaries thought that drinking alcohol was fun and relaxing. Curiosity was an important factor in starting to drink alcohol. Peer pressure played a role, e.g., it was difficult not to drink when peers were drinking. Most parents advised their child to drink a small amount only. The attitude of ordinary sobers towards alcohol was that drinking alcohol was stupid; moreover, they did not feel the need to drink. Most parents set strict rules and prohibited the use of alcohol before the age of 16. Conclusions Qualitative insight into the attitudes towards alcohol and the role played by parents and peers, revealed differences between ordinaries and ordinary sobers. Based on these differences and on health education theories, starting points for the development of interventions, for both parents and adolescents, are formulated. Important starting points for interventions targeting ordinaries are reducing perceived peer pressure and learning to make one’s own choices. For the ordinary sobers, an important starting point includes enabling them to express to others that they do not feel the need to drink alcohol. Starting points for parents include setting strict rules, restricting alcohol availability at home and monitoring their child’s alcohol use. PMID:24885322

An Investigation of Alternate Synthesis for 2,2’ -BIS(Phenylethynyl)-5, 5’ -Diaminobenzidine

DTIC Science & Technology

1985-05-01

essentially complete reaction of starting material to give cleanly the biphenyl tetraacetamide compound VIla. After work-up, the product melting point ...of compound llh in ethanolic potassium hydroxide with and without diethanolamine catalysis iReference 34) gave a product with a high melting point ...After cooling, aqueous work-up gave a precipitate, which after drying, displayed a low melting point (110-130 0 C). The crude compound was purified by

Crumb Rubber-Concrete Panels Under Blast Loads

DTIC Science & Technology

2010-05-01

and the samples were labeled. Samples were picked up with an overhead crane and a form spreader connected to two points on the sample, each outside...uniform loading. Shortly after test started 8 to 9 cracks developed within quarter points and 2 cracks developed through pick points where form spreader ...dynamic behaviour of recycled tyre rubber-filled concrete.” Cem. Concr. Res., 32, 1587–1596. Huang, B., Li, G., Pang, S. S., and Eggers, J. (2004

Acquisition Program Transition Workshops: An Element of the DSMC Program Manager Mission Assistance Capability

DTIC Science & Technology

2011-10-01

specific modules as needed. The term “startup” is inclusive of any point in a DoD acquisition program. As noted above, methodology for conducting...Acquisition Sustainment =Decision Point =Milestone Review =Decision Point if PDR is not conducted before Milestone B ProgramA B Initiation) C IOC FOC...start a new program 2.2 Background Conclusions flowing from these observations led the Office of the Secretary of Defense, the De - fense Acquisition

Simultaneous measurement of passage through the restriction point and MCM loading in single cells

PubMed Central

Håland, T. W.; Boye, E.; Stokke, T.; Grallert, B.; Syljuåsen, R. G.

2015-01-01

Passage through the Retinoblastoma protein (RB1)-dependent restriction point and the loading of minichromosome maintenance proteins (MCMs) are two crucial events in G1-phase that help maintain genome integrity. Deregulation of these processes can cause uncontrolled proliferation and cancer development. Both events have been extensively characterized individually, but their relative timing and inter-dependence remain less clear. Here, we describe a novel method to simultaneously measure MCM loading and passage through the restriction point. We exploit that the RB1 protein is anchored in G1-phase but is released when hyper-phosphorylated at the restriction point. After extracting cells with salt and detergent before fixation we can simultaneously measure, by flow cytometry, the loading of MCMs onto chromatin and RB1 binding to determine the order of the two events in individual cells. We have used this method to examine the relative timing of the two events in human cells. Whereas in BJ fibroblasts released from G0-phase MCM loading started mainly after the restriction point, in a significant fraction of exponentially growing BJ and U2OS osteosarcoma cells MCMs were loaded in G1-phase with RB1 anchored, demonstrating that MCM loading can also start before the restriction point. These results were supported by measurements in synchronized U2OS cells. PMID:26250117

SU-E-J-71: Spatially Preserving Prior Knowledge-Based Treatment Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, H; Xing, L

2015-06-15

Purpose: Prior knowledge-based treatment planning is impeded by the use of a single dose volume histogram (DVH) curve. Critical spatial information is lost from collapsing the dose distribution into a histogram. Even similar patients possess geometric variations that becomes inaccessible in the form of a single DVH. We propose a simple prior knowledge-based planning scheme that extracts features from prior dose distribution while still preserving the spatial information. Methods: A prior patient plan is not used as a mere starting point for a new patient but rather stopping criteria are constructed. Each structure from the prior patient is partitioned intomore » multiple shells. For instance, the PTV is partitioned into an inner, middle, and outer shell. Prior dose statistics are then extracted for each shell and translated into the appropriate Dmin and Dmax parameters for the new patient. Results: The partitioned dose information from a prior case has been applied onto 14 2-D prostate cases. Using prior case yielded final DVHs that was comparable to manual planning, even though the DVH for the prior case was different from the DVH for the 14 cases. Solely using a single DVH for the entire organ was also performed for comparison but showed a much poorer performance. Different ways of translating the prior dose statistics into parameters for the new patient was also tested. Conclusion: Prior knowledge-based treatment planning need to salvage the spatial information without transforming the patients on a voxel to voxel basis. An efficient balance between the anatomy and dose domain is gained through partitioning the organs into multiple shells. The use of prior knowledge not only serves as a starting point for a new case but the information extracted from the partitioned shells are also translated into stopping criteria for the optimization problem at hand.« less

Fast-Solving Quasi-Optimal LS-S3VM Based on an Extended Candidate Set.

PubMed

Ma, Yuefeng; Liang, Xun; Kwok, James T; Li, Jianping; Zhou, Xiaoping; Zhang, Haiyan

2018-04-01

The semisupervised least squares support vector machine (LS-S 3 VM) is an important enhancement of least squares support vector machines in semisupervised learning. Given that most data collected from the real world are without labels, semisupervised approaches are more applicable than standard supervised approaches. Although a few training methods for LS-S 3 VM exist, the problem of deriving the optimal decision hyperplane efficiently and effectually has not been solved. In this paper, a fully weighted model of LS-S 3 VM is proposed, and a simple integer programming (IP) model is introduced through an equivalent transformation to solve the model. Based on the distances between the unlabeled data and the decision hyperplane, a new indicator is designed to represent the possibility that the label of an unlabeled datum should be reversed in each iteration during training. Using the indicator, we construct an extended candidate set consisting of the indices of unlabeled data with high possibilities, which integrates more information from unlabeled data. Our algorithm is degenerated into a special scenario of the previous algorithm when the extended candidate set is reduced into a set with only one element. Two strategies are utilized to determine the descent directions based on the extended candidate set. Furthermore, we developed a novel method for locating a good starting point based on the properties of the equivalent IP model. Combined with the extended candidate set and the carefully computed starting point, a fast algorithm to solve LS-S 3 VM quasi-optimally is proposed. The choice of quasi-optimal solutions results in low computational cost and avoidance of overfitting. Experiments show that our algorithm equipped with the two designed strategies is more effective than other algorithms in at least one of the following three aspects: 1) computational complexity; 2) generalization ability; and 3) flexibility. However, our algorithm and other algorithms have similar levels of performance in the remaining aspects.

Factors affecting measured aircraft sound levels in the vicinity of start-of-takeoff roll

NASA Astrophysics Data System (ADS)

Richard, Horonjeff; Fleming, Gregg G.; Rickley, Edward J.; Connor, Thomas L.

This paper presents the findings of a recently conducted measurement and analysis program of jet transport aircraft sound levels in the vicinity of the star-of-takeoff roll. The purpose of the program was two-fold: (1) to evaluate the computational accuracy of the Federal Aviation Administration's Integrated Noise Model (INM) in the vicinity of start-of-takeoff roll with a recently updated database (INM 3.10), and (2) to provide guidance for future model improvements. Focusing on the second of these two goals, this paper examines several factors affecting Sound Exposure Levels (SELs) in the hemicircular area behind the aircraft brake release point at the start-of-takeoff. In addition to the aircraft type itself, these factors included the geometric relationship of the measurement site to the runway, the wind velocity (speed and direction), aircraft grow weight, and start-of-roll mode (static or rolling start).

The Physics of Tokamak Start-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Mueller

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. ITER, the National Spherical Torus eXperiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-upmore » techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.« less

The physics of tokamak start-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, D.

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases, inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. International Thermonuclear Experimental Reactor, the National Spherical Torus Experiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in themore » solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection, and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.« less

Campaign Photometry During The 2010 Eclipse Of Epsilon Aurigae

NASA Astrophysics Data System (ADS)

Hopkins, Jeff; Stencel, R. E.

2011-01-01

Epsilon Aurigae is a long period (27.1 years) eclipsing binary star system with an eclipse that lasts nearly 2 years, but with severe ambiguities about component masses and shape. The current eclipse began on schedule in August of 2009. During the previous, 1982-1984 eclipse, an International Campaign was formed to coordinate a detailed study of the system. While that Campaign was deemed successful, the evolutionary status of the star system remained unclear. Epsilon Aurigae has been observed nearly continuously since the 1982 eclipse. The current Campaign was officially started in 2006. In addition to a Yahoo forum we have a dedicated web site and more than 18 online newsletters reporting photometry, spectroscopy, interferometry and polarimetry data. High quality UBVRIJH band photometric data since before the start of the current eclipse has been submitted. We explore the color differences among the light curves in terms of eclipse phases and archival data. At least one new model of the star system has been proposed since the current Campaign began: a low mass but very high luminosity F star plus a B star surrounded by a debris disk. The current eclipse and in particular the interferometry and spectroscopic data have caused new thoughts on defining eclipsing variable star contact points and phases of an eclipse. Second contact may not be the same point as start of totality and third contact may not be the same point as the start of egress and end of totality. In addition, the much awaited mid-eclipse brightening may or may not have appeared. This paper identifies the current Campaign contributors and the photometric data. This work was supported in part by the bequest of William Herschel Womble in support of astronomy at the University of Denver, by NSF grant 1016678 to the University of Denver.

Determining the Number of Clusters in a Data Set Without Graphical Interpretation

NASA Technical Reports Server (NTRS)

Aguirre, Nathan S.; Davies, Misty D.

2011-01-01

Cluster analysis is a data mining technique that is meant ot simplify the process of classifying data points. The basic clustering process requires an input of data points and the number of clusters wanted. The clustering algorithm will then pick starting C points for the clusters, which can be either random spatial points or random data points. It then assigns each data point to the nearest C point where "nearest usually means Euclidean distance, but some algorithms use another criterion. The next step is determining whether the clustering arrangement this found is within a certain tolerance. If it falls within this tolerance, the process ends. Otherwise the C points are adjusted based on how many data points are in each cluster, and the steps repeat until the algorithm converges,

Sensitivity analysis and economic optimization studies of inverted five-spot gas cycling in gas condensate reservoir

NASA Astrophysics Data System (ADS)

Shams, Bilal; Yao, Jun; Zhang, Kai; Zhang, Lei

2017-08-01

Gas condensate reservoirs usually exhibit complex flow behaviors because of propagation response of pressure drop from the wellbore into the reservoir. When reservoir pressure drops below the dew point in two phase flow of gas and condensate, the accumulation of large condensate amount occurs in the gas condensate reservoirs. Usually, the saturation of condensate accumulation in volumetric gas condensate reservoirs is lower than the critical condensate saturation that causes trapping of large amount of condensate in reservoir pores. Trapped condensate often is lost due to condensate accumulation-condensate blockage courtesy of high molecular weight, heavy condensate residue. Recovering lost condensate most economically and optimally has always been a challenging goal. Thus, gas cycling is applied to alleviate such a drastic loss in resources. In gas injection, the flooding pattern, injection timing and injection duration are key parameters to study an efficient EOR scenario in order to recover lost condensate. This work contains sensitivity analysis on different parameters to generate an accurate investigation about the effects on performance of different injection scenarios in homogeneous gas condensate system. In this paper, starting time of gas cycling and injection period are the parameters used to influence condensate recovery of a five-spot well pattern which has an injection pressure constraint of 3000 psi and production wells are constraint at 500 psi min. BHP. Starting injection times of 1 month, 4 months and 9 months after natural depletion areapplied in the first study. The second study is conducted by varying injection duration. Three durations are selected: 100 days, 400 days and 900 days. In miscible gas injection, miscibility and vaporization of condensate by injected gas is more efficient mechanism for condensate recovery. From this study, it is proven that the application of gas cycling on five-spot well pattern greatly enhances condensate recovery preventing financial, economic and resource loss that previously occurred.

Preventing Delays in First-Case Starts on the Neurosurgery Service: A Resident-Led Initiative at an Academic Institution.

PubMed

Han, Seunggu J; Rolston, John D; Zygourakis, Corinna C; Sun, Matthew Z; McDermott, Michael W; Lau, Catherine Y; Aghi, Manish K

2016-01-01

On-time starts for the first case of the day are critical to maintaining efficiency in operating rooms (ORs). We studied whether a resident-led initiative to ensure on-time site marking and documentation of surgical consent could lead to improved first-case start time. In a resident-led initiative at a large 600-bed academic hospital with 25 ORs, we aimed to complete site marking and surgical consents half an hour before the scheduled start time for all first-case neurosurgical patients. We monitored the occurrence of delayed first starts and the length of delay during our initiative, and compared these cases to neurosurgical cases 3 months before the implementation of the initiative and to first-start nonneurosurgical cases. In the year of the initiative, both site marking and surgical consents were completed 30 minutes before the case start in 97% of neurosurgical cases. The average delay across all first-case starts was reduced to 7.17 minutes (N = 1271), compared with 9.67 minutes before the intervention (N = 345). During the study period, non-neurosurgical cases were delayed on average 10.3 minutes (N = 3592). There was a significant difference in latencies between the study period and the period before the initiative (p < 0.001), and also between neurosurgical cases and nonneurosurgical cases (p < 0.001). There was no reduction in delay times seen on the non-neurosurgical services in the study period when compared to the case 3 months before. Considering its effect across 1271 cases, this initiative over 1 year resulted in a total reduction of 52 hours and 57 minutes in delays. Through a resident-led quality improvement program, neurosurgical trainees successfully reduced delays in first-case starts on a surgical service. Engaging physician trainees in quality improvement and enhancing OR efficiency can be successfully achieved and can have a significant clinical and financial effect. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Burnout syndrome prevalence in physiotherapists.

PubMed

González-Sánchez, Blanca; López-Arza, María Victoria González; Montanero-Fernández, Jesús; Varela-Donoso, Enrique; Rodríguez-Mansilla, Juan; Mingote-Adán, José Carlos

2017-04-01

To evaluate burnout syndrome in its three aspects, jointly as well as independently, in physiotherapists from the Extremadura region (Spain). Analytic descriptive epidemiological transversal trial in primary care and institutional practice, with physiotherapists practicing in Extremadura who met the inclusion criteria, after having signed an informed consent form. Emotional exhaustion, depersonalization and low professional accomplishment were the outcomes measured. Physiotherapists from Extremadura show a 65.23 point level of burnout syndrome, according to the Maslach Burnout Inventory questionnaire. Therefore, they are positioned in the middle of the rating scale for the syndrome, and very near to the high level at starting score of 66 points. Physiotherapists in Extremadura present moderate scores for the three dimensions of burnout syndrome, namely, emotional exhaustion, depersonalization and low professional accomplishment. For this reason, they are in the moderate level of the syndrome and very near to the high level, which starts at a score of 66 points. No relation between burnout syndrome and age has been found in our study.

Transversal Fluctuations of the ASEP, Stochastic Six Vertex Model, and Hall-Littlewood Gibbsian Line Ensembles

NASA Astrophysics Data System (ADS)

Corwin, Ivan; Dimitrov, Evgeni

2018-05-01

We consider the ASEP and the stochastic six vertex model started with step initial data. After a long time, T, it is known that the one-point height function fluctuations for these systems are of order T 1/3. We prove the KPZ prediction of T 2/3 scaling in space. Namely, we prove tightness (and Brownian absolute continuity of all subsequential limits) as T goes to infinity of the height function with spatial coordinate scaled by T 2/3 and fluctuations scaled by T 1/3. The starting point for proving these results is a connection discovered recently by Borodin-Bufetov-Wheeler between the stochastic six vertex height function and the Hall-Littlewood process (a certain measure on plane partitions). Interpreting this process as a line ensemble with a Gibbsian resampling invariance, we show that the one-point tightness of the top curve can be propagated to the tightness of the entire curve.

Cryogenic Tank Structure Sizing With Structural Optimization Method

NASA Technical Reports Server (NTRS)

Wang, J. T.; Johnson, T. F.; Sleight, D. W.; Saether, E.

2001-01-01

Structural optimization methods in MSC /NASTRAN are used to size substructures and to reduce the weight of a composite sandwich cryogenic tank for future launch vehicles. Because the feasible design space of this problem is non-convex, many local minima are found. This non-convex problem is investigated in detail by conducting a series of analyses along a design line connecting two feasible designs. Strain constraint violations occur for some design points along the design line. Since MSC/NASTRAN uses gradient-based optimization procedures. it does not guarantee that the lowest weight design can be found. In this study, a simple procedure is introduced to create a new starting point based on design variable values from previous optimization analyses. Optimization analysis using this new starting point can produce a lower weight design. Detailed inputs for setting up the MSC/NASTRAN optimization analysis and final tank design results are presented in this paper. Approaches for obtaining further weight reductions are also discussed.

Two-stage fan. 4: Performance data for stator setting angle optimization

NASA Technical Reports Server (NTRS)

Burger, G. D.; Keenan, M. J.

1975-01-01

Stator setting angle optimization tests were conducted on a two-stage fan to improve efficiency at overspeed, stall margin at design speed, and both efficiency and stall margin at partspeed. The fan has a design pressure ratio of 2.8, a flow rate of 184.2 lb/sec (83.55 kg/sec) and a 1st-stage rotor tip speed of 1450 ft/sec (441.96 in/sec). Performance was obtained at 70,100, and 105 percent of design speed with different combinations of 1st-stage and 2nd-stage stator settings. One combination of settings, other than design, was common to all three speeds. At design speed, a 2.0 percentage point increase in stall margin was obtained at the expense of a 1.3 percentage point efficiency decrease. At 105 percent speed, efficiency was improved by 1.8 percentage points but stall margin decreased 4.7 percentage points. At 70 percent speed, no change in stall margin or operating line efficiency was obtained with stator resets although considerable speed-flow requlation occurred.

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe.

PubMed

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-28

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties-including the thermal conductivity and viscosity-of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe's start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected.

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe

PubMed Central

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-01

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties—including the thermal conductivity and viscosity—of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe’s start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected. PMID:29382094

A personal sampler for aircraft engine cold start particles: laboratory development and testing.

PubMed

Armendariz, Alfredo; Leith, David

2003-01-01

Industrial hygienists in the U.S. Air Force are concerned about exposure of their personnel to jet fuel. One potential source of exposure for flightline ground crews is the plume emitted during the start of aircraft engines in extremely cold weather. The purpose of this study was to investigate a personal sampler, a small tube-and-wire electrostatic precipitator (ESP), for assessing exposure to aircraft engine cold start particles. Tests were performed in the laboratory to characterize the sampler's collection efficiency and to determine the magnitude of adsorption and evaporation artifacts. A low-temperature chamber was developed for the artifact experiments so tests could be performed at temperatures similar to actual field conditions. The ESP collected particles from 0.5 to 20 micro m diameter with greater than 98% efficiency at particle concentrations up to 100 mg/m(3). Adsorption artifacts were less than 5 micro g/m(3) when sampling a high concentration vapor stream. Evaporation artifacts were significantly lower for the ESP than for PVC membrane filters across a range of sampling times and incoming vapor concentrations. These tests indicate that the ESP provides more accurate exposure assessment results than traditional filter-based particle samplers when sampling cold start particles produced by an aircraft engine.

Novel Method for High-Throughput Full-Length IGHV-D-J Sequencing of the Immune Repertoire from Bulk B-Cells with Single-Cell Resolution.

PubMed

Vergani, Stefano; Korsunsky, Ilya; Mazzarello, Andrea Nicola; Ferrer, Gerardo; Chiorazzi, Nicholas; Bagnara, Davide

2017-01-01

Efficient and accurate high-throughput DNA sequencing of the adaptive immune receptor repertoire (AIRR) is necessary to study immune diversity in healthy subjects and disease-related conditions. The high complexity and diversity of the AIRR coupled with the limited amount of starting material, which can compromise identification of the full biological diversity makes such sequencing particularly challenging. AIRR sequencing protocols often fail to fully capture the sampled AIRR diversity, especially for samples containing restricted numbers of B lymphocytes. Here, we describe a library preparation method for immunoglobulin sequencing that results in an exhaustive full-length repertoire where virtually every sampled B-cell is sequenced. This maximizes the likelihood of identifying and quantifying the entire IGHV-D-J repertoire of a sample, including the detection of rearrangements present in only one cell in the starting population. The methodology establishes the importance of circumventing genetic material dilution in the preamplification phases and incorporates the use of certain described concepts: (1) balancing the starting material amount and depth of sequencing, (2) avoiding IGHV gene-specific amplification, and (3) using Unique Molecular Identifier. Together, this methodology is highly efficient, in particular for detecting rare rearrangements in the sampled population and when only a limited amount of starting material is available.

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

Genomic analysis of three Bifidobacterium species isolated from the calf gastrointestinal tract

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, William J.; Cookson, Adrian L.; Altermann, Eric

Ruminant animals contribute significantly to the global value of agriculture and rely on a complex microbial community for efficient digestion. However, little is known of how this microbial-host relationship develops and is maintained. To begin to address this, we have determined the ability of three Bifidobacterium species isolated from the faeces of newborn calves to grow on carbohydrates typical of a newborn ruminant diet. Genome sequences have been determined for these bacteria with analysis of the genomes providing insights into the host association and identification of several genes that may mediate interactions with the ruminant gastrointestinal tract. The present studymore » provides a starting point from which we can define the role of potential beneficial microbes in the nutrition of young ruminants and begin to influence the interactions between the microbiota and the host. The differences observed in genomic content hint at niche partitioning among the bifidobacterial species analysed and the different strategies they employ to successfully adapt to this habitat.« less

Numerical calculation of aerodynamics wind turbine blade S809 airfoil and comparison of theoretical calculations with experimental measurements and confirming with NREL data

NASA Astrophysics Data System (ADS)

Sogukpinar, Haci; Bozkurt, Ismail

2018-02-01

Aerodynamic performance of the airfoil plays the most important role to obtain economically maximum efficiency from a wind turbine. Therefore airfoil should have an ideal aerodynamic shape. In this study, aerodynamic simulation of S809 airfoil is conducted and obtained result compared with previously made NASA experimental result and NREL theoretical data. At first, Lift coefficient, lift to drag ratio and pressure coefficient around S809 airfoil are calculated with SST turbulence model, and are compared with experimental and other theoretical data to correlate simulation correctness of the computational approaches. And result indicates good correlation with both experimental and theoretical data. This calculation point out that as the increasing relative velocity, lift to drag ratio increases. Lift to drag ratio attain maximum at the angle around 6 degree and after that starts to decrease again. Comparison shows that CFD code used in this calculation can predict aerodynamic properties of airfoil.

Understanding DNA Repair in Hyperthermophilic Archaea: Persistent Gaps and Other Reasons to Focus on the Fork

PubMed Central

Grogan, Dennis W.

2015-01-01

Although hyperthermophilic archaea arguably have a great need for efficient DNA repair, they lack members of several DNA repair protein families broadly conserved among bacteria and eukaryotes. Conversely, the putative DNA repair genes that do occur in these archaea often do not generate the expected phenotype when deleted. The prospect that hyperthermophilic archaea have some unique strategies for coping with DNA damage and replication errors has intellectual and technological appeal, but resolving this question will require alternative coping mechanisms to be proposed and tested experimentally. This review evaluates a combination of four enigmatic properties that distinguishes the hyperthermophilic archaea from all other organisms: DNA polymerase stalling at dU, apparent lack of conventional NER, lack of MutSL homologs, and apparent essentiality of homologous recombination proteins. Hypothetical damage-coping strategies that could explain this set of properties may provide new starting points for efforts to define how archaea differ from conventional models of DNA repair and replication fidelity. PMID:26146487

Comprehensive sequence-flux mapping of a levoglucosan utilization pathway in E. coli

DOE PAGES

Klesmith, Justin R.; Bacik, John -Paul; Michalczyk, Ryszard; ...

2015-09-14

Synthetic metabolic pathways often suffer from low specific productivity, and new methods that quickly assess pathway functionality for many thousands of variants are urgently needed. Here we present an approach that enables the rapid and parallel determination of sequence effects on flux for complete gene-encoding sequences. We show that this method can be used to determine the effects of over 8000 single point mutants of a pyrolysis oil catabolic pathway implanted in Escherichia coli. Experimental sequence-function data sets predicted whether fitness-enhancing mutations to the enzyme levoglucosan kinase resulted from enhanced catalytic efficiency or enzyme stability. A structure of one designmore » incorporating 38 mutations elucidated the structural basis of high fitness mutations. One design incorporating 15 beneficial mutations supported a 15-fold improvement in growth rate and greater than 24-fold improvement in enzyme activity relative to the starting pathway. Lastly, this technique can be extended to improve a wide variety of designed pathways.« less

Enhanced stability of car-following model upon incorporation of short-term driving memory

NASA Astrophysics Data System (ADS)

Liu, Da-Wei; Shi, Zhong-Ke; Ai, Wen-Huan

2017-06-01

Based on the full velocity difference model, a new car-following model is developed to investigate the effect of short-term driving memory on traffic flow in this paper. Short-term driving memory is introduced as the influence factor of driver's anticipation behavior. The stability condition of the newly developed model is derived and the modified Korteweg-de Vries (mKdV) equation is constructed to describe the traffic behavior near the critical point. Via numerical method, evolution of a small perturbation is investigated firstly. The results show that the improvement of this new car-following model over the previous ones lies in the fact that the new model can improve the traffic stability. Starting and breaking processes of vehicles in the signalized intersection are also investigated. The numerical simulations illustrate that the new model can successfully describe the driver's anticipation behavior, and that the efficiency and safety of the vehicles passing through the signalized intersection are improved by considering short-term driving memory.

Genomic analysis of three Bifidobacterium species isolated from the calf gastrointestinal tract

DOE PAGES

Kelly, William J.; Cookson, Adrian L.; Altermann, Eric; ...

2016-07-29

Ruminant animals contribute significantly to the global value of agriculture and rely on a complex microbial community for efficient digestion. However, little is known of how this microbial-host relationship develops and is maintained. To begin to address this, we have determined the ability of three Bifidobacterium species isolated from the faeces of newborn calves to grow on carbohydrates typical of a newborn ruminant diet. Genome sequences have been determined for these bacteria with analysis of the genomes providing insights into the host association and identification of several genes that may mediate interactions with the ruminant gastrointestinal tract. The present studymore » provides a starting point from which we can define the role of potential beneficial microbes in the nutrition of young ruminants and begin to influence the interactions between the microbiota and the host. The differences observed in genomic content hint at niche partitioning among the bifidobacterial species analysed and the different strategies they employ to successfully adapt to this habitat.« less

Synthesis and Demonstration of the Biological Relevance of sp3 -rich Scaffolds Distantly Related to Natural Product Frameworks.

PubMed

Foley, Daniel J; Craven, Philip G E; Collins, Patrick M; Doveston, Richard G; Aimon, Anthony; Talon, Romain; Churcher, Ian; von Delft, Frank; Marsden, Stephen P; Nelson, Adam

2017-10-26

The productive exploration of chemical space is an enduring challenge in chemical biology and medicinal chemistry. Natural products are biologically relevant, and their frameworks have facilitated chemical tool and drug discovery. A "top-down" synthetic approach is described that enabled a range of complex bridged intermediates to be converted with high step efficiency into 26 diverse sp 3 -rich scaffolds. The scaffolds have local natural product-like features, but are only distantly related to specific natural product frameworks. To assess biological relevance, a set of 52 fragments was prepared, and screened by high-throughput crystallography against three targets from two protein families (ATAD2, BRD1 and JMJD2D). In each case, 3D fragment hits were identified that would serve as distinctive starting points for ligand discovery. This demonstrates that frameworks that are distantly related to natural products can facilitate discovery of new biologically relevant regions within chemical space. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

[How to efficiently conduct a physiological examination of a child--from the viewpoint of a medical technologist].

PubMed

Yamadera, Yukio; Aihara, Rieko; Koitabashi, Yoshie; Matsuda, Mitsuko; Takakuda, Yoshie; Kurosaki, Sachiko

2014-08-01

Children are often frightened, cry, refuse to sit still, and may not cooperate during a physiological examination. Technologists must take considerable care to reduce the child's anxiety. Specifically, we should use creative solutions, start by interacting with the patient, using dolls or toys, and explain the procedure to him/her in a friendly way, communicating more effectively with the patient's family. When performing the actual examinations, technologists need to work skillfully with a complete understanding of the purpose of the examinations, having the ability to identify the changes that occur in various developmental stages and interpret the pathophysiological mechanisms specific to children. Furthermore, we must always have an awareness of safety, taking measures to prevent falls from the bed and/or to keep the room warm if examinations require the child to be naked, so that he/she will not catch a cold. I explain various points of caution and possible solutions regarding electrocardiograms, electroencephalograms, and ultrasonography, from the viewpoint of a medical technologist.

Experimental comparison of MCFC performance using three different biogas types and methane

NASA Astrophysics Data System (ADS)

Bove, Roberto; Lunghi, Piero

Biogas recovery is an environmentally friendly and cost-effective practice that is getting consensus in both the scientific and industrial community, as the growing number of projects demonstrate. The use of fuel cells as energy conversion systems increases the conversion efficiency, as well as the environmental benefits. Molten carbonate fuel cells (MCFC) operate at a temperature of about 650 °C, thus presenting a high fuel flexibility, compared to low temperature fuel cells. Aim of the present study is to compare the performance of an MCFC single cell, fuelled with different biogas types as well as methane. The biogases considered are derived from the following processes: (1) steam gasification in an entrained flow gasifier; (2) steam gasification in a duel interconnect fluidized bed gasifier; (3) biogas from an anaerobic digestion process. The performances are evaluated for different fuel utilization and current densities. The results are an essential starting point for a complete system design and demonstration.

G4 motifs affect origin positioning and efficiency in two vertebrate replicators

PubMed Central

Valton, Anne-Laure; Hassan-Zadeh, Vahideh; Lema, Ingrid; Boggetto, Nicole; Alberti, Patrizia; Saintomé, Carole; Riou, Jean-François; Prioleau, Marie-Noëlle

2014-01-01

DNA replication ensures the accurate duplication of the genome at each cell cycle. It begins at specific sites called replication origins. Genome-wide studies in vertebrates have recently identified a consensus G-rich motif potentially able to form G-quadruplexes (G4) in most replication origins. However, there is no experimental evidence to demonstrate that G4 are actually required for replication initiation. We show here, with two model origins, that G4 motifs are required for replication initiation. Two G4 motifs cooperate in one of our model origins. The other contains only one critical G4, and its orientation determines the precise position of the replication start site. Point mutations affecting the stability of this G4 in vitro also impair origin function. Finally, this G4 is not sufficient for origin activity and must cooperate with a 200-bp cis-regulatory element. In conclusion, our study strongly supports the predicted essential role of G4 in replication initiation. PMID:24521668

Optimization of a Bioluminescence Resonance Energy Transfer-Based Assay for Screening of Trypanosoma cruzi Protein/Protein Interaction Inhibitors.

PubMed

Mild, Jesica G; Fernandez, Lucia R; Gayet, Odile; Iovanna, Juan; Dusetti, Nelson; Edreira, Martin M

2018-05-01

Chagas disease, a parasitic disease caused by Trypanosoma cruzi, is a major public health burden in poor rural populations of Central and South America and a serious emerging threat outside the endemic region, since the number of infections in non-endemic countries continues to rise. In order to develop more efficient anti-trypanosomal treatments to replace the outdated therapies, new molecular targets need to be explored and new drugs discovered. Trypanosoma cruzi has distinctive structural and functional characteristics with respect to the human host. These exclusive features could emerge as interesting drug targets. In this work, essential and differential protein-protein interactions for the parasite, including the ribosomal P proteins and proteins involved in mRNA processing, were evaluated in a bioluminescence resonance energy transfer-based assay as a starting point for drug screening. Suitable conditions to consider using this simple and robust methodology to screening compounds and natural extracts able to inhibit protein-protein interactions were set in living cells and lysates.

The isolation and purification of a caribbean maitotoxin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, S.E.; Knoepp, S.M.; Lanoue, B.A.

1994-12-31

The phenomenon known as red tide has been a topic of great interest in that there is concern that the scale and complexity of this natural phenomenon are expanding. It is known that the benthic dinoflagellate, Gambierdiscus toxicus, produces a variety of polyether toxins that contaminate seafood and result in human illness. Maitotoxin (MTX) is one of the toxins that have been implicated in ciguatera seafood poisoning. There is a need for the development of a much broader understanding of the nature of the poisoning toxins. MTX cogeners can be difficult to isolate due to its size and chemical nature.more » A major goal is to obtain a purified standard of a Caribbean MTX so that more efficient assays can be developed to test seafood for the presence of toxins and thus avoid human harm. The primary goal of this project is to obtain large amounts of pure maitotoxin. The procedure described is also useful as a starting point for the purification of other toxins.« less

[Aristotle on the function of blood in the processes of life].

PubMed

Jori, Alberto

2005-01-01

This contribution explains some aspects of the Aristotelian conception of blood. According to Aristotle, blood is an homogeneous part of the body. It is producted in the heart of the warmest animals through the "cooking" of the nourishment, and then it is distributed all over the body, where it has non only the function to nourish the different organs and to induce their growth, but it also passes on the sense-data. Furthermore in the male creatures blood is the starting-point of the production - through a further "cooking" - of semen. On the contrary in the creatures of the female sex, whose body is colder such a tranformation of blood in semen doesn't happen. In the copulation the semen of the male works as bearer of the form and efficient cause, while the female blood acts as matter The outcome of the ag6n that takes place between the two factors determines for its part the sex of the offspring.

A Golay complementary TS-based symbol synchronization scheme in variable rate LDPC-coded MB-OFDM UWBoF system

NASA Astrophysics Data System (ADS)

He, Jing; Wen, Xuejie; Chen, Ming; Chen, Lin

2015-09-01

In this paper, a Golay complementary training sequence (TS)-based symbol synchronization scheme is proposed and experimentally demonstrated in multiband orthogonal frequency division multiplexing (MB-OFDM) ultra-wideband over fiber (UWBoF) system with a variable rate low-density parity-check (LDPC) code. Meanwhile, the coding gain and spectral efficiency in the variable rate LDPC-coded MB-OFDM UWBoF system are investigated. By utilizing the non-periodic auto-correlation property of the Golay complementary pair, the start point of LDPC-coded MB-OFDM UWB signal can be estimated accurately. After 100 km standard single-mode fiber (SSMF) transmission, at the bit error rate of 1×10-3, the experimental results show that the short block length 64QAM-LDPC coding provides a coding gain of 4.5 dB, 3.8 dB and 2.9 dB for a code rate of 62.5%, 75% and 87.5%, respectively.

Kinetics of D-lactic acid production by Sporolactobacillus sp. strain CASD using repeated batch fermentation.

PubMed

Zhao, Bo; Wang, Limin; Li, Fengsong; Hua, Dongliang; Ma, Cuiqing; Ma, Yanhe; Xu, Ping

2010-08-01

D-lactic acid was produced by Sporolactobacillus sp. strain CASD in repeated batch fermentation with one- and two-reactor systems. The strain showed relatively high energy consumption in its growth-related metabolism in comparison with other lactic acid producers. When the fermentation was repeated with 10% (v/v) of previous culture to start a new batch, D-lactic acid production shifted from being cell-maintenance-dependent to cell-growth-dependent. In comparison with the one-reactor system, D-lactic acid production increased approximately 9% in the fourth batch of the two-reactor system. Strain CASD is an efficient D-lactic acid producer with increased growth rate at the early stage of repeated cycles, which explains the strain's physiological adaptation to repeated batch culture and improved performance in the two-reactor fermentation system. From a kinetic point of view, two-reactor fermentation system was shown to be an alternative for conventional one-reactor repeated batch operation. Copyright 2010 Elsevier Ltd. All rights reserved.

[The practice guideline 'Pregnancy and puerperium' (first revision) from the Dutch College of General Practitioners; a response from the perspective of gynaecology].

PubMed

Heringa, M P

2004-01-10

The major benefit of the revised version of the Dutch College of General Practitioners' practice guideline about pregnancy and puerperium is the formal starting point of professional equality of midwives and general practitioners as care providers in antenatal and postpartum care. This thorough evidence-based practice guideline is behind the most recent developments in this field. Scientific evidence on vertical HIV transmission favours screening all pregnant women and not just the selective procedure proposed in this guideline. The restrictive attitude towards routine ultrasound screening during pregnancy hardly seems in line with scientific evidence and the public demand. On the other hand the guideline is very progressive as far as the care of women with thyroid disorders is concerned even though evidence on this subject is meagre. Most importantly the transition of antenatal care from the current almost conveyor belt-like procedure to an efficient but individually-adapted care process was not addressed.

Synthesis and Demonstration of the Biological Relevance of sp3‐rich Scaffolds Distantly Related to Natural Product Frameworks

PubMed Central

Foley, Daniel J.; Craven, Philip G. E.; Collins, Patrick M.; Doveston, Richard G.; Aimon, Anthony; Talon, Romain; Churcher, Ian; von Delft, Frank

2017-01-01

Abstract The productive exploration of chemical space is an enduring challenge in chemical biology and medicinal chemistry. Natural products are biologically relevant, and their frameworks have facilitated chemical tool and drug discovery. A “top‐down” synthetic approach is described that enabled a range of complex bridged intermediates to be converted with high step efficiency into 26 diverse sp3‐rich scaffolds. The scaffolds have local natural product‐like features, but are only distantly related to specific natural product frameworks. To assess biological relevance, a set of 52 fragments was prepared, and screened by high‐throughput crystallography against three targets from two protein families (ATAD2, BRD1 and JMJD2D). In each case, 3D fragment hits were identified that would serve as distinctive starting points for ligand discovery. This demonstrates that frameworks that are distantly related to natural products can facilitate discovery of new biologically relevant regions within chemical space. PMID:28983993

Mesenchymal Stem Cells in Lipogems, a Reverse Story: from Clinical Practice to Basic Science.

PubMed

Tremolada, Carlo; Ricordi, Camillo; Caplan, Arnold I; Ventura, Carlo

2016-01-01

The idea that basic science should be the starting point for modern clinical approaches has been consolidated over the years, and emerged as the cornerstone of Molecular Medicine. Nevertheless, there is increasing concern over the low efficiency and inherent costs related to the translation of achievements from the bench to the bedside. These burdens are also perceived with respect to the effectiveness of translating basic discoveries in stem cell biology to the newly developing field of advanced cell therapy or Regenerative Medicine. As an alternative paradigm, past and recent history in Medical Science provides remarkable reverse stories in which clinical observations at the patient's bedside have fed major advances in basic research which, in turn, led to consistent progression in clinical practice. Within this context, we discuss our recently developed method and device, which forms the core of a system (Lipogems) for processing of human adipose tissue solely with the aid of mild mechanical forces to yield a microfractured tissue product.

Evaluating the impact of contracting out basic health care services in the state of São Paulo, Brazil

PubMed Central

Greve, Jane; Schattan Ruas Pereira Coelho, Vera

2017-01-01

Abstract As a means of dealing with shortcomings in the coverage, quality and efficiency of the public health care sector, several municipalities in the state of São Paulo, Brazil, have started to contract pre-certified non-profit or non-governmental organizations to take part in the delivery of health care services. This paper explores the impact of introducing these contracts in the primary health care sector. Using data on the 645 municipalities in the state of São Paulo and difference-in-differences methods, we estimate the effect of contracting out in the primary health care sector on various dimensions of mortality and health care use. The results show that implementation of the contracting out strategy significantly increases the number of primary health care appointments by approximately one appointment per user of the national health care system per year. Point estimates indicate a reducing effect on hospitalization for preventable diseases. PMID:28419264

MEMS tandem ion-sorption micropump

NASA Astrophysics Data System (ADS)

Grzebyk, T.

2017-12-01

This paper presents a two-stage MEMS ion-sorption micropump, which works in a wide range of pressures—it allows efficient evacuation of gases from the internal volume of any microsystem starting from atmospheric pressure down to 10-6 hPa. The miniature pre-vacuum pump is realized as a two-electrode silicon-glass structure with a very close inter-electrode distance. The use of the silicon substrate as a getter material instead of a metallic layer significantly increases the pumping capacity and as a result, the initial pressure can be reduced to a level of 1 hPa. From this point the pumping is continued with the second glow-discharge high vacuum micropump. This pump is a multilayer structure, in which ions are trapped in crossed electric and magnetic fields. It allows further reduction of pressure down to 10-6 hPa. Both pumps are technologically compatible and together they enable the on-chip generation of avacuum at the desired level in a variety of miniaturized devices.

Blind calibration of radio interferometric arrays using sparsity constraints and its implications for self-calibration

NASA Astrophysics Data System (ADS)

Chiarucci, Simone; Wijnholds, Stefan J.

2018-02-01

Blind calibration, i.e. calibration without a priori knowledge of the source model, is robust to the presence of unknown sources such as transient phenomena or (low-power) broad-band radio frequency interference that escaped detection. In this paper, we present a novel method for blind calibration of a radio interferometric array assuming that the observed field only contains a small number of discrete point sources. We show the huge computational advantage over previous blind calibration methods and we assess its statistical efficiency and robustness to noise and the quality of the initial estimate. We demonstrate the method on actual data from a Low-Frequency Array low-band antenna station showing that our blind calibration is able to recover the same gain solutions as the regular calibration approach, as expected from theory and simulations. We also discuss the implications of our findings for the robustness of regular self-calibration to poor starting models.

Experimental investigation on a high head model Francis turbine during load rejection

NASA Astrophysics Data System (ADS)

Goyal, R.; Bergan, C.; Cervantes, M. J.; Gandhi, B. K.; Dahlhaug, O. G.

2016-11-01

Francis-99 is a set of workshop aiming to determine the state of the art of high head model Francis turbine simulations (flow and structure) under steady and transient operating conditions as well as to promote their development and knowledge dissemination openly. The first workshop (Trondheim, 2014) was concerned with steady state operation. The second workshop will focus on transient operations such as load variation and start-stop. In the present work, 2-D particle image velocimetry (PIV) with synchronized pressure measurements performed in the draft tube cone of the Francis-99 test case during load rejection is presented. Pressure sensors were mounted in the vaneless space and draft tube cone to estimate the instantaneous pressure fluctuations while operating the turbine from the best efficiency point (9.8°) to part load (6.7°) with the presence of a rotating vortex rope (RVR). The time-resolved velocity and pressure data are presented in this paper showing the transition in the turbine from one state to another.

The maxillary molar endodontic access opening: A microscope-based approach

PubMed Central

Mamoun, John Sami

2016-01-01

This article reviews the basic clinical techniques of performing a maxillary molar endodontic access opening, starting from the initial access opening into the pulp chamber, to the point where a size #10 file has been advanced to the apices of all three or four (or more) canals. The article explains how the use of the dental surgical operating microscope or microscope-level loupes magnification of ×6–8 or greater, combined with head-mounted or coaxial illumination, improve the ability of a dentist to identify microscopic root canal orifices, which facilitates the efficient creation of conservative access openings with adequate straight-line access in maxillary molars. Magnified photos illustrate various microscopic anatomical structures or landmarks of the initial access opening. Techniques are explored for implementing an access opening for teeth with vital versus necrotic pulpal tissues. The article also explores the use of piezoelectric or ultrasonic instruments for revealing root canal orifices and for removing pulp stones or calcified pulpal tissue inside the pulp chamber. PMID:27403069

Urban Renewable Building And Neighborhood Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

URBANopt is a user interface for creating and running district and city scale building energy simulations. The framework is built around the OpenStudio Urban Measures which are part of the OpenStudio project. Building footprints, building height, building type, and other data can be imported from public records or other sources. Footprints and locations for new buildings and district systems can also be specified. OpenStudio Measures are used to create starting point energy models and to model energy design features and efficiency measures for each building. URBANopt allows a user to pose several scenarios such as “what if 30% of themore » commercial retail buildings added roof top solar” or “what if all elementary schools converted to ground source heat pumps” and then visualize the impacts at a district or city scale. URBANopt is capable of modeling existing buildings, new construction, and district energy systems. URBANopt can be used to explore options for achieving Zero Energy across a collection of buildings (e.g., Zero Energy Districts).« less

Mutual-information-based image to patient re-registration using intraoperative ultrasound in image-guided neurosurgery

PubMed Central

Ji, Songbai; Wu, Ziji; Hartov, Alex; Roberts, David W.; Paulsen, Keith D.

2008-01-01

An image-based re-registration scheme has been developed and evaluated that uses fiducial registration as a starting point to maximize the normalized mutual information (nMI) between intraoperative ultrasound (iUS) and preoperative magnetic resonance images (pMR). We show that this scheme significantly (p⪡0.001) reduces tumor boundary misalignment between iUS pre-durotomy and pMR from an average of 2.5 mm to 1.0 mm in six resection surgeries. The corrected tumor alignment before dural opening provides a more accurate reference for assessing subsequent intraoperative tumor displacement, which is important for brain shift compensation as surgery progresses. In addition, we report the translational and rotational capture ranges necessary for successful convergence of the nMI registration technique (5.9 mm and 5.2 deg, respectively). The proposed scheme is automatic, sufficiently robust, and computationally efficient (<2 min), and holds promise for routine clinical use in the operating room during image-guided neurosurgical procedures. PMID:18975707

Local health department 2009 H1N1 influenza vaccination clinics-CDC staffing model comparison and other best practices.

PubMed

Porter, Dayna; Hall, Mark; Hartl, Brian; Raevsky, Cathy; Peacock, Roberta; Kraker, David; Walls, Sandra; Brink, Gail

2011-01-01

Mass vaccination clinic staffing models, such as the Centers for Disease Control and Prevention Large-Scale Vaccination Clinic Output and Staff Estimates: An Example, provide guidance on appropriate roles and number of staff for successful mass vaccination clinics within local and state health departments. The Kent County Health Department used this model as a starting point for mass vaccination clinics in response to 2009 H1N1 influenza. In addition to discussion of successful modification of the Centers for Disease Control and Prevention model to maximize local health department mass vaccination clinic efficiency, additional best practices including use of the Incident Command System and a reservation system are provided. Use of the provided modified staffing model and additional best practices will increase the success of health department mass vaccination clinics, and should be considered not only for future public health emergencies, but also for seasonal influenza vaccination campaigns.

Initial guidelines and estimates for a power system with inertial (flywheel) energy storage

NASA Technical Reports Server (NTRS)

Slifer, L. W., Jr.

1980-01-01

The starting point for the assessment of a spacecraft power system utilizing inertial (flywheel) energy storage. Both general and specific guidelines are defined for the assessment of a modular flywheel system, operationally similar to but with significantly greater capability than the multimission modular spacecraft (MMS) power system. Goals for the flywheel system are defined in terms of efficiently train estimates and mass estimates for the system components. The inertial storage power system uses a 5 kw-hr flywheel storage component at 50 percent depth of discharge (DOD). It is capable of supporting an average load of 3 kw, including a peak load of 7.5 kw for 10 percent of the duty cycle, in low earth orbit operation. The specific power goal for the system is 10 w/kg, consisting of a 56w/kg (end of life) solar array, a 21.7 w-hr/kg (at 50 percent DOD) flywheel, and 43 w/kg power processing (conditioning, control and distribution).

Dissecting fragment-based lead discovery at the von Hippel-Lindau protein:hypoxia inducible factor 1α protein-protein interface.

PubMed

Van Molle, Inge; Thomann, Andreas; Buckley, Dennis L; So, Ernest C; Lang, Steffen; Crews, Craig M; Ciulli, Alessio

2012-10-26

Fragment screening is widely used to identify attractive starting points for drug design. However, its potential and limitations to assess the tractability of often challenging protein:protein interfaces have been underexplored. Here, we address this question by means of a systematic deconstruction of lead-like inhibitors of the pVHL:HIF-1α interaction into their component fragments. Using biophysical techniques commonly employed for screening, we could only detect binding of fragments that violate the Rule of Three, are more complex than those typically screened against classical druggable targets, and occupy two adjacent binding subsites at the interface rather than just one. Analyses based on ligand and group lipophilicity efficiency of anchored fragments were applied to dissect the individual subsites and probe for binding hot spots. The implications of our findings for targeting protein interfaces by fragment-based approaches are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Mapping the global flow of steel: from steelmaking to end-use goods.

PubMed

Cullen, Jonathan M; Allwood, Julian M; Bambach, Margarita D

2012-12-18

Our society is addicted to steel. Global demand for steel has risen to 1.4 billion tonnes a year and is set to at least double by 2050, while the steel industry generates nearly a 10th of the world's energy related CO₂ emissions. Meeting our 2050 climate change targets would require a 75% reduction in CO₂ emissions for every tonne of steel produced and finding credible solutions is proving a challenge. The starting point for understanding the environmental impacts of steel production is to accurately map the global steel supply chain and identify the biggest steel flows where actions can be directed to deliver the largest impact. In this paper we present a map of global steel, which for the first time traces steel flows from steelmaking, through casting, forming, and rolling, to the fabrication of final goods. The diagram reveals the relative scale of steel flows and shows where efforts to improve energy and material efficiency should be focused.

Recalcitrant carbohydrates after enzymatic hydrolysis of pretreated lignocellulosic biomass.

PubMed

Alcántara, María Ángeles Bermúdez; Dobruchowska, Justyna; Azadi, Parastoo; García, Bruno Díez; Molina-Heredia, Fernando P; Reyes-Sosa, Francisco Manuel

2016-01-01

To reduce the cost of the enzymes for the hydrolysis of lignocellulosic biomass, two main strategies have been followed: one, the reduction of enzyme dosing by the use of more efficient and stable enzymatic cocktails; another, to include accessory enzymes in the cocktails to increase yields by reducing the recalcitrant carbohydrate fraction remaining at the end of the process. To guide this second strategy, we have explored the chemical bond composition of different fractions of recalcitrant carbohydrates after enzymatic hydrolysis. Two lignocellulosic feedstocks of relevance for the biofuels industry have been analyzed, corn stover and sugarcane straw. On comparing the composition of chemical bonds of the starting pretreated material with samples after standard and forced hydrolysis (with enzyme overdosing), we obtained similar sugar and chemical bond composition. This suggests that the current enzymatic cocktails bear the set of enzymes needed to hydrolyze these feedstocks. From our point of view, the results show the need for a parallel fine-tuning of the enzymatic cocktails with the pretreatment process to maximize sugar release yield.

Risk Mitigation for the Development of the New Ariane 5 On-Board Computer

NASA Astrophysics Data System (ADS)

Stransky, Arnaud; Chevalier, Laurent; Dubuc, Francois; Conde-Reis, Alain; Ledoux, Alain; Miramont, Philippe; Johansson, Leif

2010-08-01

In the frame of the Ariane 5 production, some equipment will become obsolete and need to be redesigned and redeveloped. This is the case for the On-Board Computer, which has to be completely redesigned and re-qualified by RUAG Space, as well as all its on-board software and associated development tools by ASTRIUM ST. This paper presents this obsolescence treatment, which has started in 2007 under an ESA contract, in the frame of ACEP and ARTA accompaniment programmes, and is very critical in technical term but also from schedule point of view: it gives the context and overall development plan, and details the risk mitigation actions agreed with ESA, especially those related to the development of the input/output ASIC, and also the on-board software porting and revalidation strategy. The efficiency of these risk mitigation actions has been proven by the outcome schedule; this development constitutes an up-to-date case for good practices, including some experience report and feedback for future other developments.

USV UHTC- Based Nose And WLE Experimental Test In SCIROCCO And CFD Rebuilding

NASA Astrophysics Data System (ADS)

Marino, G.; De Filippis, F.; Di Clement, M.; Russo, G.

2011-05-01

It is well known that sharp aerodynamic configurations could provide much more efficiency in “flying” during the re-entry phase of spacecrafts, and/or the hypersonic cruise of futuristic aerospace planes. However such innovation in the design criteria, implies a dramatic increase of the localized heat fluxes at the stagnation points of the leading edges of the aerodynamic surfaces that, as matter of fact, might then require dedicated thermal protection systems, able to sustain thermal loads much higher than those typically experienced by conventional materials applied on blunt bodies. In this perspective CIRA started its own investigations on the design methodology [1], characterization methods, manufacturing procedures, and qualification tests of medium size components based on exotic ceramic materials able to sustain temperatures even exceeding 2000°C, the so called Ultra High Temperature Ceramics (UHTC’s). This paper summarizes CIRA experience achieved so far trough the test opportunities conducted on-ground in the SCIROCCO plasma wind tunnel.

Online literature-retrieval systems: how to get started.

PubMed

Tousignaut, D R

1983-02-01

Basic information describing online literature-retrieval systems is presented; the power of online searching is also discussed. The equipment, expense involved, and training necessary to perform online searching efficiently is described. An individual searcher needs only a computer terminal and a telephone; by telephone, the searcher connects with an online vendor's computer at another location. The four major U.S. vendors (Dialog, Bibliographic Retrieval Services, Systems Development Corporation, and the National Library of Medicine) are compared. A step-by-step procedure of logging in and searching is presented. Using the International Pharmaceutical Abstracts database as an example, 17 access points to locating an article via an online system are compared with only two (the subject and author index entry) of a printed service. By searching online, one can search the published literature on a specific topic in a matter of minutes. An online search is very useful when limited information is available or the search question contains a term that is not in a printed index.

Shortcut loading a Bose–Einstein condensate into an optical lattice

NASA Astrophysics Data System (ADS)

Zhou, Xiaoji; Jin, Shengjie; Schmiedmayer, Jörg

2018-05-01

We present an effective and fast (few microseconds) procedure for transferring a Bose–Einstein condensate from the ground state in a harmonic trap into the desired bands of an optical lattice. Our shortcut method is a designed pulse sequence where the time duration and the interval in each step are fully optimized in order to maximize robustness and fidelity of the final state with respect to the target state. The atoms can be prepared in a single band with even or odd parity, and superposition states of different bands can be prepared and manipulated. Furthermore, we extend this idea to the case of two-dimensional or three-dimensional optical lattices where the energies of excited states are degenerate. We experimentally demonstrate various examples and show very good agreement with the theoretical model. Efficient shortcut methods will find applications in the preparation of quantum systems, in quantum information processing, in precise measurement and as a starting point to investigate dynamics in excited bands.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kachru, Shamit; Paquette, Natalie M.; Volpato, Roberto

Here, the simplest string theory compactifications to 3D with 16 supercharges—the heterotic string on T 7, and type II strings onmore » $$K3 \\times T^3$$ —are related by U-duality, and share a moduli space of vacua parametrized by $$O(8, 24;{{\\mathbb Z}}) ~\\backslash ~O(8, 24)~ /~ (O(8) \\times O(24))$$ . One can think of this as the moduli space of even, self-dual 32-dimensional lattices with signature (8,24). At 24 special points in moduli space, the lattice splits as $$\\Gamma^{8, 0} \\oplus \\Gamma^{0, 24}$$ . $$\\Gamma^{0, 24}$$ can be the Leech lattice or any of 23 Niemeier lattices, while $$\\Gamma^{8, 0}$$ is the E 8 root lattice. We show that starting from this observation, one can find a precise connection between the Umbral groups and type IIA string theory on K3. This may provide a natural physical starting point for understanding Mathieu and Umbral moonshine. The maximal unbroken subgroups of Umbral groups in 6D (or any other limit) are those obtained by starting at the associated Niemeier point and moving in moduli space while preserving the largest possible subgroup of the Umbral group. To illustrate the action of these symmetries on BPS states, we discuss the computation of certain protected four-derivative terms in the effective field theory, and recover facts about the spectrum and symmetry representations of 1/2-BPS states.« less

On the Efficiency Costs of De-Tracking Secondary Schools in Europe

ERIC Educational Resources Information Center

Brunello, Giorgio; Rocco, Lorenzo; Ariga, Kenn; Iwahashi, Roki

2012-01-01

Many European countries have delayed the time when school tracking starts in order to pursue equality of opportunity. What are the efficiency costs of de-tracking secondary schools? This paper builds a stylized model of the optimal time of tracking, estimates the relevant parameters using micro data for 11 European countries and computes the…

Funding Universities for Efficiency and Equity: Research Findings versus Petty Politics

ERIC Educational Resources Information Center

Psacharopoulos, George

2008-01-01

The present paper starts by discussing the principles of public funding of universities. The size of the social returns to investment in education gives an indication regarding the most efficient use of resources, while the difference between the private and the social rates relates to issues of equity. The available evidence is contrasted to…

A Robotic Fish to Emulate the Fast-Start

NASA Astrophysics Data System (ADS)

Currier, Todd; Ma, Ganzhong; Modarres-Sadeghi, Yahya

2017-11-01

An experimental study is conducted on a robotic fish designed to emulate the fast-start response. The fish body is constructed of 3D printed ribs and a light spring steel spine. The body is actuated using a series of pressured pistons. A total of four pistons are supplied with pressure through lightweight high pressure service lines. The source of pressure is carbon dioxide with a 700 psi peak operating pressure resulting in a body response that can cycle a c-start maneuver in milliseconds. The motion of the fish is precisely controlled through the use of solenoids with a control signal produced by a programmable microprocessor. The fish is constrained in all translational degrees of freedom but allowed to rotate about a vertical axis. The influence of the point of rotation is studied with different mounting points along the length of the head of the fish. The forces are measured in two perpendicular in-plane directions. A high speed camera is used to capture the response of the fish and the corresponding flow around it. Comparison is made with the kinematics observed in live fish.

The hetC Gene Is a Direct Target of the NtcA Transcriptional Regulator in Cyanobacterial Heterocyst Development

PubMed Central

Muro-Pastor, Alicia M.; Valladares, Ana; Flores, Enrique; Herrero, Antonia

1999-01-01

The heterocyst is the site of nitrogen fixation in aerobically grown cultures of some filamentous cyanobacteria. Heterocyst development in Anabaena sp. strain PCC 7120 is dependent on the global nitrogen regulator NtcA and requires, among others, the products of the hetR and hetC genes. Expression of hetC, tested by RNA- DNA hybridization, was impaired in an ntcA mutant. A nitrogen-regulated, NtcA-dependent putative transcription start point was localized at nucleotide −571 with respect to the hetC translational start. Sequences upstream from this transcription start point exhibit the structure of the canonical cyanobacterial promoter activated by NtcA, and purified NtcA protein specifically bound to a DNA fragment containing this promoter. Activation of expression of hetC during heterocyst development appears thus to be directly operated by NtcA. NtcA-mediated activation of hetR expression was not impaired in a hetC mutant, indicating that HetC is not an NtcA-dependent element required for hetR induction. PMID:10542167

Software Design Document MCC CSCI (1). Volume 2, Sections 2.18.1 - 2.22

DTIC Science & Technology

1991-06-01

tparam pointer to long mnt +Standard C type. _____________________ Internal Variables _____________ Variable Type Where Typedef Declared td ...ist points to the last transaction pointer on the TimeList. The function call is AssocAddToStart~ffimieList( td , startTimeList, endTimeList). Table 2.20...42 describes the parameters used by this function. Parameters Parameter Type______ Where Typedef Declared td pointer to /simnetllibsrc/libassoc/assoc

The Successes and Failures of Democracy in the Post-Soviet Republics

DTIC Science & Technology

2016-09-01

concepts and terms must be defined and qualified. To start at the beginning, what is meant by the term democracy? How is this term defined and...established a baseline definition for research and analysis.10 Although minimalist , and perhaps seemingly devoid of valuable information, this...republics in 2002 can be used as a starting point for investigation. Returning to Figure 1 and McFaul’s Balance of Leadership Theory, the data show

Method for controlling start-up and steady state performance of a closed split flow recompression brayton cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasch, James Jay

A method of resolving a balanced condition that generates control parameters for start-up and steady state operating points and various component and cycle performances for a closed split flow recompression cycle system. The method provides for improved control of a Brayton cycle thermal to electrical power conversion system. The method may also be used for system design, operational simulation and/or parameter prediction.

Air & Space Power Journal. Volume 29, Number 2, March-April 2015

DTIC Science & Technology

2015-04-01

patrols of host-nation and US security personnel within the airfield, and the fairly unobtrusive comings and goings of US vehicles. Such minimalist and...are the ends.24 Although the follow- ing list is incomplete, the recommendations may offer a starting point for discussion of those “ways” for an...USAF has the benefit of starting from a firm foundation of experience and conceptual understanding. Harmo- nizing and simplifying competing interests

Cortical surface shift estimation using stereovision and optical flow motion tracking via projection image registration

PubMed Central

Ji, Songbai; Fan, Xiaoyao; Roberts, David W.; Hartov, Alex; Paulsen, Keith D.

2014-01-01

Stereovision is an important intraoperative imaging technique that captures the exposed parenchymal surface noninvasively during open cranial surgery. Estimating cortical surface shift efficiently and accurately is critical to compensate for brain deformation in the operating room (OR). In this study, we present an automatic and robust registration technique based on optical flow (OF) motion tracking to compensate for cortical surface displacement throughout surgery. Stereo images of the cortical surface were acquired at multiple time points after dural opening to reconstruct three-dimensional (3D) texture intensity-encoded cortical surfaces. A local coordinate system was established with its z-axis parallel to the average surface normal direction of the reconstructed cortical surface immediately after dural opening in order to produce two-dimensional (2D) projection images. A dense displacement field between the two projection images was determined directly from OF motion tracking without the need for feature identification or tracking. The starting and end points of the displacement vectors on the two cortical surfaces were then obtained following spatial mapping inversion to produce the full 3D displacement of the exposed cortical surface. We evaluated the technique with images obtained from digital phantoms and 18 surgical cases – 10 of which involved independent measurements of feature locations acquired with a tracked stylus for accuracy comparisons, and 8 others of which 4 involved stereo image acquisitions at three or more time points during surgery to illustrate utility throughout a procedure. Results from the digital phantom images were very accurate (0.05 pixels). In the 10 surgical cases with independently digitized point locations, the average agreement between feature coordinates derived from the cortical surface reconstructions was 1.7–2.1 mm relative to those determined with the tracked stylus probe. The agreement in feature displacement tracking was also comparable to tracked probe data (difference in displacement magnitude was <1 mm on average). The average magnitude of cortical surface displacement was 7.9 ± 5.7 mm (range 0.3–24.4 mm) in all patient cases with the displacement components along gravity being 5.2 ± 6.0 mm relative to the lateral movement of 2.4 ± 1.6 mm. Thus, our technique appears to be sufficiently accurate and computationally efficiency (typically ~15 s), for applications in the OR. PMID:25077845

Apparatus and method using a holographic optical element for converting a spectral distribution to image points

NASA Technical Reports Server (NTRS)

McGill, Matthew J. (Inventor); Scott, Vibart S. (Inventor); Marzouk, Marzouk (Inventor)

2001-01-01

A holographic optical element transforms a spectral distribution of light to image points. The element comprises areas, each of which acts as a separate lens to image the light incident in its area to an image point. Each area contains the recorded hologram of a point source object. The image points can be made to lie in a line in the same focal plane so as to align with a linear array detector. A version of the element has been developed that has concentric equal areas to match the circular fringe pattern of a Fabry-Perot interferometer. The element has high transmission efficiency, and when coupled with high quantum efficiency solid state detectors, provides an efficient photon-collecting detection system. The element may be used as part of the detection system in a direct detection Doppler lidar system or multiple field of view lidar system.

CCOMP: An efficient algorithm for complex roots computation of determinantal equations

NASA Astrophysics Data System (ADS)

Zouros, Grigorios P.

2018-01-01

In this paper a free Python algorithm, entitled CCOMP (Complex roots COMPutation), is developed for the efficient computation of complex roots of determinantal equations inside a prescribed complex domain. The key to the method presented is the efficient determination of the candidate points inside the domain which, in their close neighborhood, a complex root may lie. Once these points are detected, the algorithm proceeds to a two-dimensional minimization problem with respect to the minimum modulus eigenvalue of the system matrix. In the core of CCOMP exist three sub-algorithms whose tasks are the efficient estimation of the minimum modulus eigenvalues of the system matrix inside the prescribed domain, the efficient computation of candidate points which guarantee the existence of minima, and finally, the computation of minima via bound constrained minimization algorithms. Theoretical results and heuristics support the development and the performance of the algorithm, which is discussed in detail. CCOMP supports general complex matrices, and its efficiency, applicability and validity is demonstrated to a variety of microwave applications.

An approach for aerodynamic optimization of transonic fan blades

NASA Astrophysics Data System (ADS)

Khelghatibana, Maryam

Aerodynamic design optimization of transonic fan blades is a highly challenging problem due to the complexity of flow field inside the fan, the conflicting design requirements and the high-dimensional design space. In order to address all these challenges, an aerodynamic design optimization method is developed in this study. This method automates the design process by integrating a geometrical parameterization method, a CFD solver and numerical optimization methods that can be applied to both single and multi-point optimization design problems. A multi-level blade parameterization is employed to modify the blade geometry. Numerical analyses are performed by solving 3D RANS equations combined with SST turbulence model. Genetic algorithms and hybrid optimization methods are applied to solve the optimization problem. In order to verify the effectiveness and feasibility of the optimization method, a singlepoint optimization problem aiming to maximize design efficiency is formulated and applied to redesign a test case. However, transonic fan blade design is inherently a multi-faceted problem that deals with several objectives such as efficiency, stall margin, and choke margin. The proposed multi-point optimization method in the current study is formulated as a bi-objective problem to maximize design and near-stall efficiencies while maintaining the required design pressure ratio. Enhancing these objectives significantly deteriorate the choke margin, specifically at high rotational speeds. Therefore, another constraint is embedded in the optimization problem in order to prevent the reduction of choke margin at high speeds. Since capturing stall inception is numerically very expensive, stall margin has not been considered as an objective in the problem statement. However, improving near-stall efficiency results in a better performance at stall condition, which could enhance the stall margin. An investigation is therefore performed on the Pareto-optimal solutions to demonstrate the relation between near-stall efficiency and stall margin. The proposed method is applied to redesign NASA rotor 67 for single and multiple operating conditions. The single-point design optimization showed +0.28 points improvement of isentropic efficiency at design point, while the design pressure ratio and mass flow are, respectively, within 0.12% and 0.11% of the reference blade. Two cases of multi-point optimization are performed: First, the proposed multi-point optimization problem is relaxed by removing the choke margin constraint in order to demonstrate the relation between near-stall efficiency and stall margin. An investigation on the Pareto-optimal solutions of this optimization shows that the stall margin has been increased with improving near-stall efficiency. The second multi-point optimization case is performed with considering all the objectives and constraints. One selected optimized design on the Pareto front presents +0.41, +0.56 and +0.9 points improvement in near-peak efficiency, near-stall efficiency and stall margin, respectively. The design pressure ratio and mass flow are, respectively, within 0.3% and 0.26% of the reference blade. Moreover the optimized design maintains the required choking margin. Detailed aerodynamic analyses are performed to investigate the effect of shape optimization on shock occurrence, secondary flows, tip leakage and shock/tip-leakage interactions in both single and multi-point optimizations.

ECG (Electrocardiogram) Interpretation Training Program - Reference Manual

DTIC Science & Technology

1984-05-08

4) PRESS THE "AUTOLOAD" KEY - this will automatically load and activate the program and bring the user to the starting point . 5) FOLLOW THE...will give you some familiarity with the landmarks. Try to go thru a few, picking out first the QRS, its the only pointed one!, then the P and T...This is the very top of the sternum, just between the medial ends of the clavicles or collar bones. From this point palpate down the sternum

Catalog of Existing Small Tools for Surface Preparation and Support Equipment for Blasters and Painters

DTIC Science & Technology

1977-05-01

128 lbs./ft3 Specific Gravity 3.6 Hardness (MOHS) 7 Melting Point 2900°F. Coefficient of Expansion 7 . 8 X 1 0– 6 FIGURE 3.17: Properties of...Beaumont, Texas Bethlehem Steel Corporation, San Francisco, California Bethlehem Steel Corporation, Sparrows Point , Maryland Jacksonville Shipyards...checklist can be used by operators and super- visors as a starting point for determining if the yard’s abrasive blasting facility is operating at full