Society News: Workshop helps new GJI authors; Free eBook for schools; EGU awards medal; AGU elects Fellow; Support your Society; New Fellows

NASA Astrophysics Data System (ADS)

2012-04-01

Early-career researchers and postgraduates are invited to attend an Author Workshop at the 2012 European Geosciences Union General Assembly in Vienna. The following were elected Fellows of the Society on 10 February 2012:

Concerns over modeling and warning capabilities in wake of Tohoku Earthquake and Tsunami

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-04-01

Improved earthquake models, better tsunami modeling and warning capabilities, and a review of nuclear power plant safety are all greatly needed following the 11 March Tohoku earthquake and tsunami, according to scientists at the European Geosciences Union's (EGU) General Assembly, held 3-8 April in Vienna, Austria. EGU quickly organized a morning session of oral presentations and an afternoon panel discussion less than 1 month after the earthquake and the tsunami and the resulting crisis at Japan's Fukushima nuclear power plant, which has now been identified as having reached the same level of severity as the 1986 Chernobyl disaster. Many of the scientists at the EGU sessions expressed concern about the inability to have anticipated the size of the earthquake and the resulting tsunami, which appears likely to have caused most of the fatalities and damage, including damage to the nuclear plant.

Linking research, education and public engagement in geoscience: Leadership and strategic partnerships

NASA Astrophysics Data System (ADS)

Laj, C. E.

2017-12-01

As a research scientist I have always been interested in sharing whatever I knew with the general public and with teachers, who have the responsibility of forming young people, our ambassadors to the future. The turning point in my educational activities was in 2002, when the European Geosciences Union (EGU) welcomed my proposition to develop a Committee on Education. One of the committee's main activities is the organisation of GIFT (Geosciences Information for Teachers) workshops, held annually during the EGU General Assembly. Typically, these workshops bring together about 80 teachers from 20-25 different countries around a general theme that changes every year. Teachers are offered a mixture of keynote presentations by renowned scientists, and participate to classroom hands-on activities led by high-class educators. They also participate to a poster session, open to every participant to the GA, in which they can show to everyone the activities they have developed in their classroom. Therefore, EGU GIFT workshops spread first-hand scientific information to science teachers, and also offer teachers an exceptional way to networking with fellow teachers worldwide. Speakers are chosen from the academic world, national geosciences organisations such as BGS (UK), BRGM (France), INGV (Italy), the European Space Agency (ESA), CEA (France), from private companies (Total), or from International Organizations for policy makers such as the International Energy Agency (IEA), and IPCC. Since 2010, EGU GIFT workshops have been organized beyond Europe, in connection with EGU Alexander von Humboldt Conferences and other major International Conferences, or in collaboration with local or international organisations. A `Teachers at Sea' program has also been developed for teachers to be able to take part in an Oceanographic cruise. Also, in collaboration with the media manager of EGU the Committee has participated in "Planet Press", a program of geoscience press releases for children.

7 years of MacGyver sessions at EGU and AGU: what happened?

NASA Astrophysics Data System (ADS)

Hut, Rolf; Selker, John; Weijs, Steven; Luxemburg, Wim; Wickert, Andy; Blume, Theresa; Bamburger, Jan; Stoof, Cathelijne; Tauro, Flavia

2016-04-01

The session that this poster is in, the: "Self-made sensors and unintended use of measurement equipment", also known as the "MacGyver-session" has had 7 years of scientists contributing their self made devices, hacks and solutions with the hydrological community. In 2009, the first session was held at the AGU fall meeting and since 2011 a session is also organised at the EGU General Assembly. On this poster, and in the accompanying review paper, we will present an overview of the work presented in the last 7 years, cataloging the work of the inventive scientists who have contributed to these successful, and above all: fun, sessions.

Automation of Ocean Product Metrics

DTIC Science & Technology

2008-09-30

Presented in: Ocean Sciences 2008 Conf., 5 Mar 2008. Shriver, J., J. D. Dykes, and J. Fabre: Automation of Operational Ocean Product Metrics. Presented in 2008 EGU General Assembly , 14 April 2008. 9 ...processing (multiple data cuts per day) and multiple-nested models. Routines for generating automated evaluations of model forecast statistics will be...developed and pre-existing tools will be collected to create a generalized tool set, which will include user-interface tools to the metrics data

Development of an Operational Multi-sensor and Multi-channel Aerosol Assimilation Package

DTIC Science & Technology

2011-08-18

2010, EGU General Assembly 2010. Shi, Y., J. Zhang, J. S. Reid, E. Hyer, Evaluation of MISR Aerosol Optical Depth Product for Aerosol Data...empirical correction procedures for generating data-assimilation-friendly over-water MODIS aerosol products. This study has been published (Shi et al...type as large r\\ values are generally related to fine mode aerosols, such as sulfate and smoke aerosols, and small r\\ values typically indicate sea

Implementation and Research on the Operational Use of the Mesoscale Prediction Model COAMPS in Poland

DTIC Science & Technology

2007-09-30

COAMPS model. Bogumil Jakubiak, University of Warsaw – participated in EGU General Assembly , Vienna Austria 15-20 April 2007 giving one oral and two...conditional forecast (background) error probability density function using an ensemble of the model forecast to generate background error statistics...COAMPS system on ICM machines at Warsaw University for the purpose of providing operational support to the general public using the ICM meteorological

3D General Circulation Model of the Middle Atmosphere of Jupiter

NASA Astrophysics Data System (ADS)

Zube, Nicholas Gerard; Zhang, Xi; Li, Cheng; Le, Tianhao

2017-10-01

The characteristics of Jupiter’s large-scale stratospheric circulation remain largely unknown. Detailed distributions of temperature and photochemical species have been provided by recent observations [1], but have not yet been accurately reproduced by middle atmosphere general circulation models (GCM). Jupiter’s stratosphere and upper troposphere are influenced by radiative forcing from solar insolation and infrared cooling from hydrogen and hydrocarbons, as well as waves propagating from the underlying troposphere [2]. The relative significance of radiative and mechanical forcing on stratospheric circulation is still being debated [3]. Here we present a 3D GCM of Jupiter’s atmosphere with a correlated-k radiative transfer scheme. The simulation results are compared with observations. We analyze the impact of model parameters on the stratospheric temperature distribution and dynamical features. Finally, we discuss future tracer transport and gravity wave parameterization schemes that may be able to accurately simulate the middle atmosphere dynamics of Jupiter and other giant planets.[1] Kunde et al. 2004, Science 305, 1582.[2] Zhang et al. 2013a, EGU General Assembly, EGU2013-5797-2.[3] Conrath 1990, Icarus, 83, 255-281.

ROMS and SUNTANS Continued Development and Support of AESOP And NLIWI

DTIC Science & Technology

2007-09-30

and Carbon Export to the Open Ocean. EGU General Assembly , Vienna, Austria, Apr. 2007. Gruber, N., T. Nagai, H. Frenzel, J.C. McWilliams, and G.-K...new generation of terrain-following, coordinate oceanic models capable of a wide range of applications — from high-resolution local domains to basin...configuration of physical features directly related to our own research, as well as the generation of data to be used as input for side boundaries by our

The EGU Blogs: an online platform for science communication

NASA Astrophysics Data System (ADS)

Roberts Artal, Laura; Ferreira, Bárbara

2017-04-01

The European Geosciences Union (EGU) Blogs (http://blogs.egu.eu) host the official blog of the EGU, GeoLog, as well as a network of blogs in the Earth, planetary and space sciences aimed at fostering a diverse community of geoscientist bloggers. The site also hosts a selection of blogs from the EGU scientific divisions, which share division-specific news, events, and activities, as well as updates on the latest research in their field. The aim of this project is to offer blogging researchers an online platform to share their insights with other scientists and, importantly, to distil complex and often misunderstood concepts so they are easier to understand for the general public. After a brief introduction, the presentation will focus on how the EGU Blogs are used for the purposes of science communication and on the challenges faced when running a diverse blog network. The EGU Blogs have the support of the EGU Outreach Committee and are made possible thanks to the work of volunteer bloggers. We are grateful for the help of Sara Mynott, former EGU Communications Officer, and Robert Barsch, EGU System Administrator and Webmaster, in this project.

Anthropogenic heat fluxes over Moscow agglomeration and other Russian and world cities

NASA Astrophysics Data System (ADS)

Belova, Iya; Ginzburg, Alexander

2010-05-01

Urbanization, particularly with respect to its sustainability, remains to be a great challenge in all regions of the world. Urbanization has an influence on soils, hydrology, and climate, these changes have effect on global climate, pollution, increase of anthropogenic greenhouse gases in the earth's atmosphere and human health. Thus anthropogenic heat flux is an important factor for estimation of development of global climate. The simple formula for anthropogenic heat fluxes (AHF) was proposed in the EGU General Assembly 2008 presentation [1] AHF = k × PD × EC, were PD is urban population density and EC is total energy consumption per capita. It was estimated that two of the world megacities - Seoul and Moscow - have the highest AHF values - 83 and 56 W/m2 correspondently. In presented paper it was studied the reasons of such high anthropogenic heat fluxes within Moscow region as well as AHF over the major Russian cities. It was shown that main reason of this circumstance is the administrative divisions in Moscow region. Moscow is ringed by Moscow circle motor road. Accordingly the city has sharply defined boundaries and densely populated residential suburbs are cut off and don't included in Moscow city administrative area. It was constructed the special graph to illuminate why Moscow city has such a high anthropogenic heat factor and how much Moscow agglomeration AHF could be if consider not only Moscow city itself but also the nearest suburb towns. Using the data from World Bank [2] and Russian governmental statistic agency [3] anthropogenic heat fluxes for Russian cities with population more than 500 000 were estimated. Energy consumption data for different Russian regions were calculated by special routine using in the Web-atlas [4]. This research is supported by RAS Fundamental Research Project 'Influence of anthropogenic heat fluxes and aerosol pollution on heat balance and climate of urbanized areas'. Other results of this project is presented in paper [5]. References: Ginzburg A., Raspletina N. Anthropogenic heat fluxes estimation for metropolitan areas and urban regions // Geophysical Research Abstracts of EGU General Assembly 2008, Vol. 10, EGU2008-A -02526; SRef-ID: 1607-7962/gra/EGU2008-A-02526. The 2009 Little Green Data Book. 2009. World Bank. Russian regions: Basic city socio-economic indexes. 2008 Statistical digest. Moscow. Rosstat. 2008. 375 p. Martynov A.S., Artyukhov V.V., Vinogradov V.G. Web-atlas: Environment and health of population of Russia. 1997. http://www.sci.aha.ru/ATL/ra32b.htm. Ginzburg A.S., D.P. Gubanova, V.M. Minashkin. 2009. Influence of natural and anthropogenic aerosols on global and regional climate. Russian Journal of General Chemistry, Volume 79, Number 9, pp. 2062-2070.

Application of Vegetation Indices to Estimate Acorn Production at Iberian Peninsula

NASA Astrophysics Data System (ADS)

Escribano, Juan A.; Díaz-Ambrona, Carlos G. H.; Recuero, Laura; Huesca, Margarita; Cicuendez, Victor; Palacios, Alicia; Tarquis, Ana M.

2014-05-01

The Iberian pig valued natural resources of the pasture when fattened in mountain. The variability of acorn production is not contained in any line of Spanish agricultural insurance. However, the production of arable pasture is covered by line insurance number 133 for loss of pasture compensation. This scenario is only contemplated for breeding cows and brave bulls, sheep, goats and horses, although pigs are not included. This insurance is established by monitoring ten-day composites Normalized Difference Vegetation Index (NDVI) measured by satellite over treeless pastures, using MODIS TERRA satellite. The aim of this work is to check if we can use a satellite vegetation index to estimate the production of acorns. In order to do so, two Spanish grassland locations have been analyzed: regions of Olivenza (Jerez-Oliva) and Merida (Badajoz). The acorns production was evaluated through 2002-2005 gauging conducted by the Grupo Habitat de la Orden (Badajoz). Medium resolution (500x500 m2) MODIS images were used during the same time period to estimate the ten-day composites NDVI at these locations. Finally, meteorological data was obtained from SIAR and MAGRAMA network stations, calculating the ten-day averaged temperature and ten day accumulated precipitation. Considering two accumulated factors, NDVI and temperature, three phenological stages were well defined being the second one which pointed differences among campaigns. Then, accumulated precipitation versus accumulated NDVI was plot for this second phenological stage obtaining maximum differences at 300 mm of cumulative rainfall. Analyzing acorn production with accumulated NDVI in that moment a production function was obtained with a correlation coefficient of 0.71. These results will be discussed in detail. References J.A. Escribano, C.G.H. Diaz-Ambrona, L. Recuero, M. Huesca, V. Cicuendez, A. Palacios-Orueta y A.M. Tarquis. Aplicacion de Indices de Vegetacion para evaluar la falta de produccion de pastos y montaneras en dehesas. I Congreso Iberico de la Dehesa y el Montado. 6-7 Noviembre, 2013, Badajoz. J.A. Escribano Rodriguez, A.M. Tarquis, C.G. Hernandez Diaz-Ambrona. Pasture Drought Insurance Based on NDVI and SAVI. Geophysical Research Abstracts, 14, EGU2012-13945, 2012. EGU General Assembly 2012. Juan Escribano Rodriguez, Carmelo Alonso, Ana Maria Tarquis, Rosa Maria Benito, Carlos Hernandez Diaz-Ambrona. Comparison of NDVI ?elds obtained from different remote sensors. Geophysical Research Abstracts, 15, EGU2013-14153, 2013. EGU General Assembly 2013 Acknowledgements. This work was partially supported by ENESA under project P10 0220C-823.

Laboratory and Sky Testing Results for the TIS H4RG-10 4k x 4k, 10 micron Visible CMOS-Hybrid Detector

DTIC Science & Technology

2007-01-01

extremely important. In this paper we discuss Teledyne Imaging Sensor’s (TIS)# H4RG-10 CMOS-Hybrid Focal Plane Assembly (FPA)@. The H4RG-10 is a...receipt of a loaned engineering grade unit ( EGU ) that was used initially for electronics set up and testing. We plan on irradiating the EGU at a later...persistence, since exposure to high energy proton flux that is typical of the space environment results in the generation of new traps in the detector

Optimizing Spectral Wave Estimates with Adjoint-Based Sensitivity Maps

DTIC Science & Technology

2014-02-18

J, Orzech MD, Ngodock HE (2013) Validation of a wave data assimilation system based on SWAN. Geophys Res Abst, (15), EGU2013-5951-1, EGU General ...surface wave spectra. Sensitivity maps are generally constructed for a selected system indicator (e.g., vorticity) by computing the differential of...spectral action balance Eq. 2, generally initialized at the off- shore boundary with spectral wave and other outputs from regional models such as

Influence of time scale wind speed data on sustainability analysis for irrigating greenhouse crops

NASA Astrophysics Data System (ADS)

Díaz Méndez, Rodrigo; García Llaneza, Joaquín; Peillón, Manuel; Perdigones, Alicia; Sanchez, Raul; Tarquis, Ana M.; Garcia, Jose Luis

2014-05-01

Appropriate water supply at crop/farm level, with suitable costs, is becoming more and more important. Energy management is closely related to water supply in this context, being wind energy one of the options to be considered, using wind pumps for irrigation water supply. Therefore, it is important to characterize the wind speed frequency distribution to study the technical feasibility to use its energy for irrigation management purpose. The general objective of this present research is to analyze the impact of time scale recorded wind speed data in the sustainability for tomato (Solanum lycopersicum L.) grown under greenhouse at Cuban conditions using drip irrigation system. For this porpoise, a daily estimation balance between water needs and water availability was used to evaluate the feasibility of the most economic windmill irrigation system. Several factors were included: wind velocity (W, m/s) in function of the time scale averaged, flow supplied by the wind pump as a function of the elevation height (H, m) and daily greenhouse evapotranspiration. Monthly volumes of water required for irrigation (Dr, m3/ha) and in the water tank (Vd, m3), as well as the monthly irrigable area (Ar, ha), were estimated by cumulative deficit water budgeting taking in account these factors. Three-hourly wind velocity (W3h, m/s) data from 1992 till 2008 was available for this study. The original data was grouped in six and twelve hourly data (W6h and W12h respectively) as well as daily data (W24h). For each time scale the daily estimation balance was applied. A comparison of the results points out a need for at least three-hourly data to be used mainly in the months in which mean wind speed are close or below the pumps threshold speed to start-up functioning. References Manuel Esteban Peillon Mesa, Ana Maria Tarquis Alfonso, José Luis García Fernández, and Raúl Sánchez Calvo. The use of wind pumps for irrigating greenhouse tomato crops: a case study in Cuba. Geophysical Research Abstracts, 13, EGU2011-64-1, 2011. EGU General Assembly 2011 M. Peillón, R. Sánchez, A.M. Tarquis and J.L. García. Wind pumps for irrigating greenhouse crops. Geophysical Research Abstracts, 14, EGU2012-14155, 2012. EGU General Assembly 2012. Manuel Peillón, Raúl Sánchez, Ana M. Tarquis, José L. García-Fernández. The use of wind pumps for greenhouse microirrigation: A case study for tomato in Cuba. Agricultural Water Management, 120, 107-114, 2013. R. Díaz, A. Rasheed, M. Peillón, A. Perdigones, R. Sánchez, A.M. Tarquis, and J.L. García. Wind pumps for irrigating greenhouse crops: a comparison in different socio-economical frameworks. Submitted to Biosystems, 2014.

Laboratory measurements of grain-bedrock interactions using inertial sensors.

NASA Astrophysics Data System (ADS)

Maniatis, Georgios; Hoey, Trevor; Hodge, Rebecca; Valyrakis, Manousos; Drysdale, Tim

2016-04-01

Sediment transport in steep mountain streams is characterized by the movement of coarse particles (diameter c.100 mm) over beds that are not fully sediment-covered. Under such conditions, individual grain dynamics become important for the prediction of sediment movement and subsequently for understanding grain-bedrock interaction. Technological advances in micro-mechanical-electrical systems now provide opportunities to measure individual grain dynamics and impact forces from inside the sediments (grain inertial frame of reference) instead of trying to infer them indirectly from water flow dynamics. We previously presented a new prototype sensor specifically developed for monitoring sediment transport [Maniatis et al. EGU 2014], and have shown how the definition of the physics of the grain using the inertial frame and subsequent derived measurements which have the potential to enhance the prediction of sediment entrainment [Maniatis et al. 2015]. Here we present the latest version of this sensor and we focus on beginning of the cessation of grain motion: the initial interaction with the bed after the translation phase. The sensor is housed in a spherical case, diameter 80mm, and is constructed using solid aluminum (density = 2.7 kg.m-3) after detailed 3D-CAD modelling. A complete Inertial Measurement Unit (a combination of micro- accelerometer, gyroscope and compass) was placed at the center of the mass of the assembly, with measurement ranges of 400g for acceleration, and 1200 rads/sec for angular velocity. In a 0.9m wide laboratory flume, bed slope = 0.02, the entrainment threshold of the sensor was measured, and the water flow was then set to this value. The sensor was then rolled freely from a static cylindrical bar positioned exactly on the surface of the flowing water. As the sensor enters the flow we record a very short period of transport (1-1.5 sec) followed by the impact on the channel bed. The measured Total Kinetic Energy (Joules) includes the translational energy component of transport (defined as a function of 3-dimensional translational velocity) as well as the rotational component (a function of the 3-axis angular velocity measurements from the gyroscope) which is neglected in the majority of contemporary saltation models. The results suggest that, for this grain scale, the magnitude of the impact of mobile grains on the bed is primarily controlled by their inertia. References Maniatis et al. 2014 EGU General assembly http://meetingorganizer.copernicus.org/EGU2014/EGU2014-12829.pdf Maniatis et. al 2015: "CALCULATION OF EXPLICIT PROBABILITY OF ENTRAINMENT BASED ON INERTIAL ACCELERATION MEASUREMENTS" J. Hydraulic Engineering, Under review.

The statistical model of origin and evolution planets of Solar system and planetary satellities

NASA Astrophysics Data System (ADS)

Krot, A.

There are the theories for exploring Solar system formation in accord Titius-Bode's low: electromagnetic theories (Birkeland (1912), Alfven (1942)), gravitational theories (Schmidt (1944), Woolfson (1964), Safronov (1969), Dole (1970)), nebular theories (Weizsaecker (1943), Kuiper (1949), Nakano (1970)) [1]-[3]. In spite of great number of work aimed to exploring formation of the Solar system, however, the mentioned theories were not able to explain all phenomena. In this connection the statistical theory for a cosmological body forming (so-called the spheroidal body model) has been proposed in [4]-[11]. Within the framework of this theory, bodies have fuzzy outlines and are represented by means of spheroidal forms. In the work [6], which is a continuation of the papers [4], [5], it has been investigated a slowly evolving in time process of a gravitational compression of a spheroidal body close to an unstable equilibrium state. In the papers [7],[8]the equation of motion of particles inside the weakly gravitating spheroidal body modeled by means of an ideal liquid has been obtained. Using Schwarzschild's and Kerr's metrics a consistency of the proposed statistical model with the general relativity has been shown in [12]. The proposed theory proceeds from the conception for forming a spheroidal body as a protoplanet from planetary nebula; it permits to derive the form of distribution functions for an immovable and rotating spheroidal body [4]-[6],[10]-[13] as well as their density masses (gravitational potentials and strengths) and also to find the distribution function of specific angular momentum of the rotating uniformly spheroidal body [13],[14]. Using the specific angular momentum distribution function this work considers a gas- dust protoplanetary cloud as a rotating and gravitating spheroidal body. Because the specific angular momenta are averaged during conglomeration process the specific angular momenta for a planets of Solar system is found. As a result a new low for Solar system planetary distances is derived (it generalizes the well-known Schmidt low). The new low gives a very good estimation of real planetary distances in Solar system (the relative error of estimation is 0%; absolute error of estimation is 0,5% besides its maximal value is equal to 5% for Earth and Pluto). This low has been applied also to estimation of Jupiter's satellities distances in this work. References: [1] M.M.Nieto, The Tutius-Bode low of planetary distances: its his-tory and theory. Pergamon: Oxford, New York et., 1972. [2] V.S. Safronov, Evolution of Protoplanetary cloud and the formation of the Earth and planets. 1969, Moscow, Nauka, (in Russian); NASA Tech. Transl. F-677, Washington, D.C. 1972. [3] A.V. Vityazev, G.V. Pechrnikova and V.S.Safronov, The Terrestrial planets: origin and early evolution. 1990. Moscow, Nauka (in Russian) [4] A.M.Krot, Achievement in Modern Radioelectronics (Special issue "Cosmic Radiophysics", Moscow), no.8, pp.66-81, 1996 (in Russian). [5] A.M.Krot, Proc. SPIE's 13th Annual Intern.Symp. "AeroSense", vol.3710, pp.1248-1259, Orlando, Florida, USA, April 5-9, 1999. [6] A.M.Krot, Proc. SPIE's 14th Annual Intern.Symp. "AeroSense", vol.4038, pp.1318-1329, Orlando, Florida, USA, April 24-28, 2000. [7] A.M.Krot, Proc. SPIE's 15th Annual Intern. Symposium "AeroSense", vol.4394, pp.1271-1282, Orlando, Florida, USA, April 16-20, 2001. [8] A.M.Krot, Proc. 53rd Intern. Astronautical Congress: The World Space Congress-2002, Houston, Texas, USA, October 10-19, 2002, Preprint IAC-02-J.P.01. - 11 p. [9] A.M.Krot, Proc. 34th Scientific Assembly of the Committee on Space Research (COSPAR)- The 2nd World Space Congress (WSC- 2002), October 10-19, 2002,Houston, Texas, USA. [10] A.M.Krot, Proc. of EGS- AGU-EUG Joint Assembly, Nice, France, April 6-11, 2003, Geophysical Research Abstracts, vol.5, EAE03-À-05568, 2003. [11] A.M. Krot, Proc. of 54 Intern. Astronautical Congress (IAC), September 29-October 3, 2003, Bremen, Germany, Preprint IAC-03-J.1.08. -11p. [12] A.M.Krot , Proc. of 35th COSPAR Scientific Assembly, Paris, France, July 18-25, 2004, Abstract-Nr. COSPAR 04-A-00162. [13] A.Krot, Proc. EGU- 2nd General Assembly, Vienna, Austria, April 24-29, 2005, Geophysical Research Abstracts, vol.7, EGU05-A-04550, 2005; SRef-ID: 1607-7962/gra/. [14] A.Krot Proc. EGU- General Assembly, Vienna, Austria, April 02- 07, 2006, Geophysical Research Abstracts, vol.8, EGU06-A-00216, 2006; SRef-ID: 1607-7962/gra/. 2

Understanding similarity of groundwater systems with empirical copulas

NASA Astrophysics Data System (ADS)

Haaf, Ezra; Kumar, Rohini; Samaniego, Luis; Barthel, Roland

2016-04-01

Within the classification framework for groundwater systems that aims for identifying similarity of hydrogeological systems and transferring information from a well-observed to an ungauged system (Haaf and Barthel, 2015; Haaf and Barthel, 2016), we propose a copula-based method for describing groundwater-systems similarity. Copulas are an emerging method in hydrological sciences that make it possible to model the dependence structure of two groundwater level time series, independently of the effects of their marginal distributions. This study is based on Samaniego et al. (2010), which described an approach calculating dissimilarity measures from bivariate empirical copula densities of streamflow time series. Subsequently, streamflow is predicted in ungauged basins by transferring properties from similar catchments. The proposed approach is innovative because copula-based similarity has not yet been applied to groundwater systems. Here we estimate the pairwise dependence structure of 600 wells in Southern Germany using 10 years of weekly groundwater level observations. Based on these empirical copulas, dissimilarity measures are estimated, such as the copula's lower- and upper corner cumulated probability, copula-based Spearman's rank correlation - as proposed by Samaniego et al. (2010). For the characterization of groundwater systems, copula-based metrics are compared with dissimilarities obtained from precipitation signals corresponding to the presumed area of influence of each groundwater well. This promising approach provides a new tool for advancing similarity-based classification of groundwater system dynamics. Haaf, E., Barthel, R., 2015. Methods for assessing hydrogeological similarity and for classification of groundwater systems on the regional scale, EGU General Assembly 2015, Vienna, Austria. Haaf, E., Barthel, R., 2016. An approach for classification of hydrogeological systems at the regional scale based on groundwater hydrographs EGU General Assembly 2016, Vienna, Austria. Samaniego, L., Bardossy, A., Kumar, R., 2010. Streamflow prediction in ungauged catchments using copula-based dissimilarity measures. Water Resources Research, 46. DOI:10.1029/2008wr007695

Editorial

NASA Astrophysics Data System (ADS)

Agosta, Fabrizio; Luetkemeyer, P. Benjamin; Lamarche, Juliette; Crider, Juliet G.; Lacombe, Olivier

2016-10-01

The present Volume is after the 2015 EGU General Assembly, held in Vienna (Austria), where we convened a session entitled "The role of fluids in faulting and fracturing in carbonates and other upper crustal rocks". In that occasion, more than forty contributions were illustrated as oral and poster presentations. The invitation to contribute to this Volume was extended not only to the session participants, but also to a wider spectrum of researchers working on related topics. As a result, a group of Earth scientists encompassing geologists, geophysicists, geochemists and petrologists contributed to this Volume, providing a sampling of the state-of-the-science on fluids and faulting in carbonate, crystalline and siliciclastic rocks from studies that combine and integrate different methods, including rock mechanics, petrophysics, structural diagenesis and crustal permeability.

Mining the Geophysical Research Abstracts Corpus: Mapping the impact of Free and Open Source Software on the EGU Divisions

NASA Astrophysics Data System (ADS)

Löwe, Peter; Klump, Jens; Robertson, Jesse

2015-04-01

Text mining is commonly employed as a tool in data science to investigate and chart emergent information from corpora of research abstracts, such as the Geophysical Research Abstracts (GRA) published by Copernicus. In this context current standards, such as persistent identifiers like DOI and ORCID, allow us to trace, cite and map links between journal publications, the underlying research data and scientific software. This network can be expressed as a directed graph which enables us to chart networks of cooperation and innovation, thematic foci and the locations of research communities in time and space. However, this approach of data science, focusing on the research process in a self-referential manner, rather than the topical work, is still in a developing stage. Scientific work presented at the EGU General Assembly is often the first step towards new approaches and innovative ideas to the geospatial community. It represents a rich, deep and heterogeneous source of geoscientific thought. This corpus is a significant data source for data science, which has not been analysed on this scale previously. In this work, the corpus of the Geophysical Research Abstracts is used for the first time as a data base for analyses of topical text mining. For this, we used a sturdy and customizable software framework, based on the work of Schmitt et al. [1]. For the analysis we used the High Performance Computing infrastructure of the German Research Centre for Geosciences GFZ in Potsdam, Germany. Here, we report on the first results from the analysis of the continuous spreading the of use of Free and Open Source Software Tools (FOSS) within the EGU communities, mapping the general increase of FOSS-themed GRA articles in the last decade and the developing spatial patterns of involved parties and FOSS topics. References: [1] Schmitt, L. M., Christianson, K.T, Gupta R..: Linguistic Computing with UNIX Tools, in Kao, A., Poteet S.R. (Eds.): Natural Language processing and Text Mining, Springer, 2007. doi:10.1007/978-1-84628-754-1_12.

Hydrogen and polyhydroxybutyrate producing abilities of microbes from diverse habitats by dark fermentative process.

PubMed

Porwal, Shalini; Kumar, Tarika; Lal, Sadhana; Rani, Asha; Kumar, Sushil; Cheema, Simrita; Purohit, Hemant J; Sharma, Rakesh; Singh Patel, Sanjay Kumar; Kalia, Vipin Chandra

2008-09-01

Thirty five bacterial isolates from diverse environmental sources such as contaminated food, nitrogen rich soil, activated sludges from pesticide and oil refineries effluent treatment plants were found to belong to Bacillus, Bordetella, Enterobacter, Proteus, and Pseudomonas sp. on the basis of 16S rRNA gene sequence analysis. Under dark fermentative conditions, maximum hydrogen (H(2)) yields (mol/mol of glucose added) were recorded to be 0.68 with Enterobacter aerogenes EGU16 followed by 0.63 with Bacillus cereus EGU43 and Bacillus thuringiensis EGU45. H(2) constituted 63-69% of the total biogas evolved. Out of these 35 microbes, 18 isolates had the ability to produce polyhydroxybutyrate (PHB), which varied up to 500 mg/l of medium, equivalent to a yield of 66.6%. The highest PHB yield was recorded with B. cereus strain EGU3. Nine strains had high hydrolytic activities (zone of hydrolysis): lipase (34-38 mm) -Bacillus sphaericus strains EGU385, EGU399 and EGU542; protease (56-62 mm) -Bacillus sp. strains EGU444, EGU447 and EGU445; amylase (23 mm) -B. thuringiensis EGU378, marine bacterium strain EGU409 and Pseudomonas sp. strain EGU448. These strains with high hydrolytic activities had relatively low H(2) producing abilities in the range of 0.26-0.42 mol/mol of glucose added and only B. thuringiensis strain EGU378 had the ability to produce PHB. This is the first report among the non-photosynthetic microbes, where the same organism(s) -B. cereus strain EGU43 and B. thuringiensis strain EGU45, have been shown to produce H(2) - 0.63 mol/mol of glucose added and PHB - 420-435 mg/l medium.

Investigation of Non-Linear Dynamics of the Rock Massive,Using Seismological Catalogue data and Induction Electromagnetic Monitoring Data in a Rock Burst Mine.

NASA Astrophysics Data System (ADS)

Hachay, O. A.; Khachay, O. Y.; Klimko, V. K.; Shipeev, O. V.

2012-04-01

Geological medium is an open dynamical system, which is influenced on different scales by natural and man-made impacts, which change the medium state and lead as a result to a complicated many ranked hierarchic evolution. That is the subject of geo synergetics. Paradigm of physical mesomechanics, which was advanced by academician Panin V.E. and his scientific school, which includes the synergetic approach is a constructive method for research and changing the state of heterogenic materials [1]. That result had been obtained on specimens of different materials. In our results of research of no stationary geological medium in a frame of natural experiments in real rock massifs, which are under high man-made influence it was shown, that the state dynamics can be revealed with use synergetics in hierarchic medium. Active and passive geophysical monitoring plays a very important role for research of the state of dynamical geological systems. It can be achieved by use electromagnetic and seismic fields. Our experience of that research showed the changing of the system state reveals on the space scales and times in the parameters, which are linked with the peculiarities of the medium of the second or higher ranks [2-5]. Results of seismological and electromagnetic information showed the mutual additional information on different space-time levels of rock massive state, which are energetic influenced by explosions, used in mining technology. It is revealed a change of nonlinearity degree in time of the massive state by active influence on it. The description of massive movement in a frame of linear dynamical system does not satisfy the practical situation. The received results are of great significance because for the first time we could find the coincidences with the mathematical theory of open systems and experimental natural results with very complicated structure. On that base we developed a new processing method for the seismological information which can be used in real time for estimation of the disaster degree changing in mine massive. The work was supported by the grant RFBR 10-05-00013. 1. Panin,V.E. et all. 1995. Physical mesomechanics and computer construction of materials . Novosibirsk.: Nauka, SIFR. V.1 pp. 350. 2. Hachay, O.A. 2006. "The problem of the research of redistribution of stress and phase states of massive between high man-made influences," Mining information and analytic bulletin, 5:109-115. 3. Hachay, O.A. and Khachay, O.Yu. 2008. "Theoretical approaches for system of geophysical state control validation of geological medium by man-made influence," Mining information and analytic bulletin 1:161-169. 4. Hachay, O.A., and Khachay, O.Yu. 2009. "Results of electromagnetic and seismic monitoring of the state of rock massive by use the approach of the open dynamical systems,"presented at the EGU2009 - EGU General Assembly 2009, session: Thermo- hydro- mechanical coupling in stressed rock, 19 April 19 - 24 April 2009. 5. Hachay, O.A. "Synergetic events in geological medium and nonlinear features of wave propagation," presented at the EGU2009 - EGU General Assembly 2009, session: Solid Earth geocomplexity: surface processes, morphology and natural resources over wide ranges of scale, 19 April 19 - 24 April 2009.

SOIL - A new open access journal of the European Geosciences Union

NASA Astrophysics Data System (ADS)

Brevik, Eric; Mataix-Solera, Jorge; Pereg, Lily; Quinton, John; Six, Johan; Van Oost, Kristof; Cerdà, Artemi

2014-05-01

The Soil System Sciences (SSS) division of the EGU has been a strong and growing international research force in the last few years. Since the first EGU meeting with SSS participation in 2004 where 200 abstracts were presented in 7 sessions, the contribution of the SSS division has grown considerably, with 1,427 abstracts presented in 57 SSS sessions at the 2013 EGU General Assembly. After 10 years of active participation, the SSS Division has developed a new open access journal, SOIL, which will serve the whole EGU membership. SOIL intends to publish scientific research that will contribute to understanding the Soil System and its interaction with humans and the entire Earth System. The scope of the journal will include all topics that fall within the study of soil science as a discipline, with an emphasis on studies that integrate soil science with other sciences (Soils and plants, Soils and water, Soils and atmosphere, Soils and biogeochemical cycling, Soils and the natural environment, Soils and the human environment, Soils and food security, Soils and biodiversity, Soils and global change, Soils and health, Soil as a resource, Soil systems, Soil degradation (chemical, physical and biological), Soil protection and remediation (including soil monitoring), Soils and methodologies). Manuscript types considered for publication in SOIL are original research articles, review articles, short communications, forum articles, and letters to the editors. SOIL will also publish up to two special issues on thematic subjects per year and encourages conveners of innovative sessions at the EGU meeting to submit proposals for special issues to the executive editor who oversees special issues. As with other EGU journals, SOIL has a two-stage publication process. In the first stage, papers that pass a rapid access-review by one of the editors will immediately be published in SOIL Discussions (SOIL-D). Papers will then be subject to interactive public discussion, during which the referees' comments (anonymous or attributed), additional short comments by other members of the scientific community (attributed), and the author's replies will also be published in SOIL-D. In the second stage, a peer-review and revision process is completed and, if accepted, finalized papers are published in SOIL. To ensure publication precedence for authors, and to provide a lasting record of scientific discussion, SOIL-D and SOIL are both ISSN-registered, permanently archived, and fully citable. SOIL has a team of five executive editors who work together to oversee the running of the journal. Those executive editors, and their areas of primary oversight, are Eric Brevik (Review Article Editor), Jorge Mataix-Solera (Special Issues Editor), John Quinton (Awards and Recognitions Editor), Johan Six (Managing Editor), and Kristof Van Oost (Forum Article Editor). SOIL also has 46 associate editors. Manuscripts can be submitted to SOIL at the journal's website (http://www.soil-journal.net/home.html) beginning in May 2014. The first issue will be published January of 2015. Publication fees will be waived for the first two years of publication.

The Seismic risk perception in Italy deduced by a statistical sample

NASA Astrophysics Data System (ADS)

Crescimbene, Massimo; La Longa, Federica; Camassi, Romano; Pino, Nicola Alessandro; Pessina, Vera; Peruzza, Laura; Cerbara, Loredana; Crescimbene, Cristiana

2015-04-01

In 2014 EGU Assembly we presented the results of a web a survey on the perception of seismic risk in Italy. The data were derived from over 8,500 questionnaires coming from all Italian regions. Our questionnaire was built by using the semantic differential method (Osgood et al. 1957) with a seven points Likert scale. The questionnaire is inspired the main theoretical approaches of risk perception (psychometric paradigm, cultural theory, etc.) .The results were promising and seem to clearly indicate an underestimation of seismic risk by the italian population. Based on these promising results, the DPC has funded our research for the second year. In 2015 EGU Assembly we present the results of a new survey deduced by an italian statistical sample. The importance of statistical significance at national scale was also suggested by ISTAT (Italian Statistic Institute), considering the study as of national interest, accepted the "project on the perception of seismic risk" as a pilot study inside the National Statistical System (SISTAN), encouraging our RU to proceed in this direction. The survey was conducted by a company specialised in population surveys using the CATI method (computer assisted telephone interview). Preliminary results will be discussed. The statistical support was provided by the research partner CNR-IRPPS. This research is funded by Italian Civil Protection Department (DPC).

Decision-making under uncertainty: results from an experiment conducted at EGU 2012

NASA Astrophysics Data System (ADS)

Ramos, Maria-Helena; van Andel, Schalk Jan; Pappenberger, Florian

2013-04-01

Do probabilistic forecasts lead to better decisions? At the EGU General Assembly 2012, we conducted a laboratory-style experiment to address this question. Several cases of flood forecasts and a choice of actions to take were presented as part of a game to participants, who acted as decision makers. Participants were prompted to make decisions when forecasts were provided with and without uncertainty information. They had to decide whether to open or not a gate which was the inlet of a retention basin designed to protect a town. The rules were such that: if they decided to open the gate, the retention basin was flooded and the farmers in this basin demanded a compensation for flooding their land; if they decided not to open the gate and a flood occurred on the river, the town was flooded and they had to pay a fine to the town. Participants were encouraged to keep note of their individual decisions in a worksheet. About 100 worksheets were collected at the end of the game and the results of their evaluation are presented here. In general, they show that decisions are based on a combination of what is displayed by the expected (forecast) value and what is given by the uncertainty information. In the absence of uncertainty information, decision makers are compelled towards a more risk-averse attitude. Besides, more money was lost by a large majority of participants when they had to make decisions without uncertainty information. Limitations of the experiment setting are discussed, as well as the importance of the development of training tools to increase effectiveness in the use of probabilistic predictions to support decisions under uncertainty.

Satellite-borne study of seismic phenomena by low frequency magnetic field observations

NASA Astrophysics Data System (ADS)

Schwingenschuh, Konrad; Magnes, Werner; Xuhui, Shen; Wang, Jindong; Pollinger, Andreas; Hagen, Christian; Prattes, Gustav; Eichelberger, Hans-Ulrich; Wolbang, Daniel; Boudjada, Mohammed Y.; Besser, Bruno P.; Rozhnoi, Alexander A.; Zhang, Tielong

2015-04-01

A combined scalar-vector magnetic field experiment will be flown on the upcoming CSES mission (China Seismo-Electromagnetic Satellite). Magnetic field data from DC to 30 Hz will be measured with an accuracy of about 10 pT. A fluxgate instrument will provide the 3 magnetic field components and a new type of an optically pumped magnetometer [see Pollinger, 2010] will measure the magnitude of the ambient magnetic field. The satellite will operate in a Sun synchronous polar orbit at an altitude of about 500 km and with an inclination of 97°. We present a model of magnetic field fluctuations in the upper ionosphere based on previous satellite observations and on a model of the lithospheric-atmospheric-ionospheric coupling. Pollinger et al., CDSM-a new scalar magnetometer, EGU General Assembly 2010

Do probabilistic forecasts lead to better decisions?

NASA Astrophysics Data System (ADS)

Ramos, M. H.; van Andel, S. J.; Pappenberger, F.

2012-12-01

The last decade has seen growing research in producing probabilistic hydro-meteorological forecasts and increasing their reliability. This followed the promise that, supplied with information about uncertainty, people would take better risk-based decisions. In recent years, therefore, research and operational developments have also start putting attention to ways of communicating the probabilistic forecasts to decision makers. Communicating probabilistic forecasts includes preparing tools and products for visualization, but also requires understanding how decision makers perceive and use uncertainty information in real-time. At the EGU General Assembly 2012, we conducted a laboratory-style experiment in which several cases of flood forecasts and a choice of actions to take were presented as part of a game to participants, who acted as decision makers. Answers were collected and analyzed. In this paper, we present the results of this exercise and discuss if indeed we make better decisions on the basis of probabilistic forecasts.

Do probabilistic forecasts lead to better decisions?

NASA Astrophysics Data System (ADS)

Ramos, M. H.; van Andel, S. J.; Pappenberger, F.

2013-06-01

The last decade has seen growing research in producing probabilistic hydro-meteorological forecasts and increasing their reliability. This followed the promise that, supplied with information about uncertainty, people would take better risk-based decisions. In recent years, therefore, research and operational developments have also started focusing attention on ways of communicating the probabilistic forecasts to decision-makers. Communicating probabilistic forecasts includes preparing tools and products for visualisation, but also requires understanding how decision-makers perceive and use uncertainty information in real time. At the EGU General Assembly 2012, we conducted a laboratory-style experiment in which several cases of flood forecasts and a choice of actions to take were presented as part of a game to participants, who acted as decision-makers. Answers were collected and analysed. In this paper, we present the results of this exercise and discuss if we indeed make better decisions on the basis of probabilistic forecasts.

Worldwide Emerging Environmental Issues Affecting the U.S. Military. April 2006 Report

DTIC Science & Technology

2006-04-01

Knowledge and Security Some of the most prominent discussions are as follows: - Dissolving coral reef shells are explained by greater increases in CO2...levels within oceanic waters. Especially vulnerable are cold sea corals and recently discovered planktonic organisms. Increases of CO2 reduce pH...leading to acidification . The panelists at the EGU Assembly suggested that 1/3 of all CO2 is absorbed into oceans and that it has recently been

Nitrogen-isotopes and multi-parameter sewage water test for identification of nitrate sources: Groundwater body Marchfeld East of Vienna

NASA Astrophysics Data System (ADS)

Kralik, Martin

2017-04-01

The application of nitrogen and oxygen isotopes in nitrate allows, under favourable circumstances, to identify potential sources such as precipitation, chemical fertilisers and manure or sewage water. Without any additional tracer, the source distinction of nitrate from manure or sewage water is still difficult. Even the application of boron isotopes can in some cases not avoid ambiguous interpretation. Therefore, the Environment Agency Austria developed a new multi parametrical indicator test to allow the identification and quantification of pollution by domestic sewage water. The test analyses 8 substances well known to occur in sewage water: Acesulfame and sucralose (two artificial, calorie-free sweeteners), benzotriazole and tolyltriazole (two industrial chemicals/corrosion inhibitors), metoprolol, sotalol, carbamazepine and the metabolite 10,11-Dihydro-10,11-dihydroxycarbamazepine (pharmaceuticals) [1]. These substances are polar and degradation in the aquatic system by microbiological processes is not documented. These 8 Substances do not occur naturally which make them ideal tracers. The test can detect wastewater in the analysed water sample down to 0.1 %. This ideal coupling of these analytic tests helps to identify the nitrogen sources in the groundwater body Marchfeld East of Vienna to a high confidence level. In addition, the results allow a reasonable quantification of nitrogen sources from different types of fertilizers as well as sewage water contributions close to villages and in wells recharged by bank filtration. Recent investigations of groundwater in selected wells in Marchfeld [2] indicated a clear nitrogen contribution by wastewater leakages (sewers or septic tanks) to the total nitrogen budget. However, this contribution is shrinking and the main source comes still from agricultural activities. [1] Humer, F.; Weiss, S.; Reinnicke, S.; Clara, M.; Grath, J.; Windhofer, G. (2013): Multi parametrical indicator test for urban wastewater influence. EGU General Assembly 2013, held 7-12 April, 2013 in Vienna, Austria, id. EGU2013-5332, EGU2013-5332. [2] Kralik, M.; Humer, F. & Grath, J. (2008): Pilotprojekt Grundwasseralter: Herkunftsanalyse von Nitrat mittels Stickstoff-, Sauerstoff-, Schwefel und Kohlenstoffisotopen. 57 S.2, Environment Agency Austria/Ministry of Agriculture, Forestry, Environment and Water Management, Vienna.

A simple measuring technique of surface flow velocity to analyze the behavior of velocity fields in hydraulic engineering applications.

NASA Astrophysics Data System (ADS)

Tellez, Jackson; Gomez, Manuel; Russo, Beniamino; Redondo, Jose M.

2015-04-01

An important achievement in hydraulic engineering is the proposal and development of new techniques for the measurement of field velocities in hydraulic problems. The technological advances in digital cameras with high resolution and high speed found in the market, and the advances in digital image processing techniques now provides a tremendous potential to measure and study the behavior of the water surface flows. This technique was applied at the Laboratory of Hydraulics at the Technical University of Catalonia - Barcelona Tech to study the 2D velocity fields in the vicinity of a grate inlet. We used a platform to test grate inlets capacity with dimensions of 5.5 m long and 4 m wide allowing a zone of useful study of 5.5m x 3m, where the width is similar of the urban road lane. The platform allows you to modify the longitudinal slopes from 0% to 10% and transversal slope from 0% to 4%. Flow rates can arrive to 200 l/s. In addition a high resolution camera with 1280 x 1024 pixels resolution with maximum speed of 488 frames per second was used. A novel technique using particle image velocimetry to measure surface flow velocities has been developed and validated with the experimental data from the grate inlets capacity. In this case, the proposed methodology can become a useful tools to understand the velocity fields of the flow approaching the inlet where the traditional measuring equipment have serious problems and limitations. References DigiFlow User Guide. (2012), (June). Russo, B., Gómez, M., & Tellez, J. (2013). Methodology to Estimate the Hydraulic Efficiency of Nontested Continuous Transverse Grates. Journal of Irrigation and Drainage Engineering, 139(10), 864-871. doi:10.1061/(ASCE)IR.1943-4774.0000625 Teresa Vila (1), Jackson Tellez (1), Jesus Maria Sanchez (2), Laura Sotillos (1), Margarita Diez (3, 1), and J., & (1), M. R. (2014). Diffusion in fractal wakes and convective thermoelectric flows. Geophysical Research Abstracts - EGU General Assembly 2014. RetrievedJanuary 07, 2015, from http://meetingorganizer.copernicus.org/EGU2014/EGU2014-1204.pdf

Complementary regulation of four Eucalyptus CBF genes under various cold conditions

PubMed Central

Navarro, M.; Marque, G.; Ayax, C.; Keller, G.; Borges, J. P.; Marque, C.; Teulières, C.

2009-01-01

CBF transcription factors play central roles in the control of freezing tolerance in plants. The isolation of two additional CBF genes, EguCBF1c and EguCBF1d, from E. gunnii, one of the cold-hardiest Eucalyptus species, is described. While the EguCBF1D protein sequence is very similar to the previously characterized EguCBF1A and EguCBF1B sequences, EguCBF1C is more distinctive, in particular in the AP2-DBD (AP2-DNA binding domain). The expression analysis of the four genes by RT-qPCR reveals that none of them is specific to one stress but they are all preferentially induced by cold, except for the EguCBF1c gene which is more responsive to salt. The calculation of the transcript copy number enables the quantification of constitutive CBF gene expression. This basal level, significant for the four genes, greatly influences the final EguCBF1 transcript level in the cold. A cold shock at 4 °C, as well as a progressive freezing which mimics a natural frost episode, trigger a fast and strong response of the EguCBF1 genes, while growth at acclimating temperatures results in a lower but more durable induction. The differential expression of the four EguCBF1 genes under these cold regimes suggests that there is a complementary regulation. The high accumulation of the CBF transcript, observed in response to the different types of cold conditions, might be a key for the winter survival of this evergreen broad-leaved tree. PMID:19457981

Geosciences Information for Teachers (GIFT) Workshops held in Conjunction with Alexander von Humboldt (AvH) EGU Conferences

NASA Astrophysics Data System (ADS)

Laj, Carlo; Cifelli, Francesca

2015-04-01

The Alexander von Humboldt Conference Series of the European Geosciences Union are a series of meetings held outside of Europe, in particular in South America, Africa or Asia, on selected topics of geosciences with a socio-economic impact for regions on these continents, jointly organised with the scientists and their institutes and the institutions of these regions. Given the increasing success of the GIFT workshops held in conjunction with the General Assemblies, since 2010 EGU has also developed a series of GIFT workshops held in conjunction with AvH conferences. Associated GIFT workshops were held in Merida, Yucatan, on the theme of Climate Change, Natural Hazards and Societies (March 2010), then in Penang, Malaysia (June 2011) on the theme of Ocean Acidification, in November 2012 in Cusco (Peru) on the theme of Natural Disasters, Global Change and the Preservation of World Heritage Sites, finally in Istanbul (March 2014) on "High Impact Natural Hazards Related to the Euro-Mediterranean Region. The next GIFT workshop is already planned for October 2015 in Adis Ababa (Ethiopia) on the theme "Water". In each case, the GIFT workshop was held on the last two days of the AvH conference and reunited 40-45 teachers from the nation where the AvH was held. Keynote speakers from AvH were speakers to the GIFT workshops which also included hands-on activities animated by sciences educators. These GIFT workshops represented the first workshops specifically aimed at teachers held in the country, and therefore represents a significant Earth Sciences contribution to secondary education in non European countries.

A Comprehensive Modeling Approach Towards Understanding and Prediction of the Alaskan Coastal System Response to Changes in an Ice-diminished Arctic

DTIC Science & Technology

2009-01-01

to generate the 3 member ensembles). In total we’ve run 120 months of simulations as part of the pan-Arctic WRF evaluation. Results from the...2009: Polar atmospheric modeling in an Arctic system model, IAMAS-IAPSO-IACS MOCA-09 Joint Assembly , Montreal, Canada. Higgins, M.E. and J.J...W., and J. Clement Kinney, 2009: Oceanic Heat Contribution to Arctic Sea Ice Melt, EGU , Vienna, Austria. Maslowski, W., 2009: State of Arctic

The limitations of seedling growth and drought tolerance to novel soil substrates in arid systems: Implications for restoration success

NASA Astrophysics Data System (ADS)

Bateman, Amber; Lewandrowski, Wolfgang; Stevens, Jason; Muñoz-Rojas, Miriam

2016-04-01

Introduction With the limited knowledge available regarding the impact of drought on seedling growth, an understanding of seedling tolerance to arid conditions is crucial for restoration success (James et al., 2013; Muñoz-Rojas et al., 2014). However, restoration in semi-arid areas faces the challenge of re-establishing plant communities on altered soil substrates (Muñoz-Rojas et al., 2015). These substrates are a result of anthropogenic disturbances such as mining which have altered the plant-soil-water dynamics of the ecosystem (Machado et al., 2013). The aim of this study was to assess the impact of mining on the plant-soil-water dynamics of an arid ecosystem of Western Australia (Pilbara region, North Western Australia) and the implications these altered relationships have on seedling growth and their responses to drought. Methods Drought responses of native plant species were assessed through a series of glasshouse experiments. Firstly, 21 species dominant to the Pilbara region were subjected to drought in a topsoil growth media to assess variation in responses (leaf water potential at the time of stomatal closure) across species and identify traits associated with drought tolerance. Secondly, four species ranging in their drought tolerance identified previously, were grown to two leaf stages (second and fourth leaf stage) in three mining substrates (topsoil, a topsoil and waste mix and waste) to assess seedling drought responses to various potential restoration substrates and how that varied with plant development stage. Results and discussion Four morphological traits were found to be significantly associated with drought indicators (leaf mass ratio, stem area, stem length, stem weight), however, these were weak correlations. Waste substrate and its addition to topsoil reduced plant total biomass but did not alter species responses to drought. However, the soil physical properties of the waste reduced water retention and water availability for plant uptake resulting in seedling mortality at less negative soil water potential. Finally, no significant differences in drought tolerance were observed between the two leaf stages across the four species tested. Analysis of plant desiccation curves found the advanced leaf stage to be less tolerant of drought as shown by a decrease in soil water potential at the time of stomatal closure. Species possess a range of morphological traits, some of which are associated with drought tolerance. However, these traits on their own may not be main drivers for drought resilience and other factors play a role, for example soil nutrient availability. Materials tested in this study that may be available to create novel restoration substrates hinder plant growth but not necessarily plant responses to drought. These findings go a long way to defining some of the limitations of seedling growth and the degree of drought tolerance which will assist in the management of post-mining restoration. References James, J.J., Sheley, R.L., Erickson,T., Rollins, K.S., Taylor, M.H., Dixon, K.W. (2013) A systems approach to restoring degraded drylands. Journal of Applied Ecology 50:730-739. Machado, N. A. M., Leite, M. G. P., Figueiredo, M. A., Kozovits, A. R. (2013) Growing Ereman-thus erythropappus in crushed laterite: A promising alternative to topsoil for baux¬ite-mine revegetation. Journal of Environmental Management 129: 149-156. Muñoz-Rojas, M., Erickson, T., Merritt, D., Dixon, K. (2014) Optimising post-mining soil conditions to maximise restoration success in a biodiverse semiarid environment. Geophysical Research. Abstracts Vol. 16, EGU2014-2069-1, EGU General Assembly. Muñoz-Rojas, M., Erickson, T., Merritt, D., Dixon, K. (2015) Applying soil science for restoration of post mining degraded landscapes in semi-arid Australia: challenges and opportunities. Geophysical Research. Abstracts Vol. 17, EGU2015-3967-1, EGU General Assembly.

Flight Problems, Problems in Starting Service,

DTIC Science & Technology

1977-01-03

h i l e a t the same time preserving hi gh f l i g h t r egu la r i t~ l e a d s to t h e fa c t t h a t the t e c h n i cal s t a r t i n g... assembl ies and pa r t s of the a i r c r a f t d~ein the previous flight (R R ), the p r o b a b i l i t y of4pr esence in the landing airport of an...of the assemblies , sets and blocks /P.- can be exchange d in a single hour in case of defects. Furthermore , in the newly constructed L-lOll

Planet Press: an EGU initiative to bring geoscientific research to children

NASA Astrophysics Data System (ADS)

Ferreira, Bárbara

2016-04-01

Planet Press (http://www.egu.eu/education/planet-press/) is an EGU educational project that aims to get children (mainly 7-13 year olds), as well as their parents and educators, interested in and engaged with up-to-date scientific research and news. Planet Press articles are short versions of EGU press releases written in child-friendly language. Because EGU press releases cover research published in the various EGU scientific journals, Planet Press focuses on topics as varied as air pollution, glaciers, climate change, earthquakes, ocean sciences, droughts and floods, or space sciences. The texts are reviewed by both scientists and educators to make sure they are accurate and clear to their target audience. By sharing new and exciting geoscientific research with young kids, we hope to inspire them to develop an interest in the Earth, planetary and space sciences. In this presentation, we describe how the Planet Press idea came about, how the project is run, and the challenges and lessons learnt since the launch of this educational initiative in 2014. Planet Press, which has the support of the EGU Committee on Education, is made possible by the work of volunteer scientists and educators who review and translate the texts. We are grateful for the help of Jane Robb, former EGU Educational Fellow, with launching the project. Planet Press is inspired by Space Scoop (http://www.spacescoop.org/), an initiative by UNAWE, the EU-Universe Awareness organisation, that brings astronomy news to children every week.

A Comprehensive Modeling Approach Towards Understanding and Prediction of the Alaskan Coastal System Response to Changes in an Ice-diminished Arctic

DTIC Science & Technology

2009-09-30

and 28 day spin-up times used to generate the 3 member ensembles). In total we’ve run 120 months of simulations as part of the pan-Arctic WRF...Cassano, J.J. and M.W. Seefeldt, 2009: Polar atmospheric modeling in an Arctic system model, IAMAS-IAPSO-IACS MOCA-09 Joint Assembly , Montreal, Canada...NOAA, Seattle, WA. Maslowski, W., and J. Clement Kinney, 2009: Oceanic Heat Contribution to Arctic Sea Ice Melt, EGU , Vienna, Austria. Maslowski, W

Urban Heat Island phenomenon in extreme continental climate (Astana, Kazakhstan)

NASA Astrophysics Data System (ADS)

Konstantinov, Pavel; Akhmetova, Alina

2015-04-01

Urban Heat Island (UHI) phenomenon is well known in scientific literature since first half of the 19th century [1]. By now a wide number of world capitals is described from climatological point of view, especially in mid-latitudes. In beginning of XXI century new studies focus on heat island of tropical cities. However dynamics UHI in extreme continental climates is insufficiently investigated, due to the fact that there isn't large cities in Europe and Northern America within that climate type. In this paper we investigate seasonal and diurnal dynamics UHI intensity for Astana, capital city of Kazakhstan (population larger than 835 000 within the city) including UHI intensity changes on different time scales. Now (since 1998) Astana is the second coldest capital city in the world after Ulaanbaatar, Mongolia [3] For this study we use the UHI investigation technology, described in [2]. According to this paper, we selected three stations: one located into city in high and midrise buildings area (including extensive lowrise and high-energy industrial - LCZ classification) and two others located in rural site (sparsely built or open-set and lightweight lowrise according LCZ classification). Also these stations must be close by distance (less than 100 km) and altitude. Therefore, first for Astana city were obtained numerical evaluations for UHI climate dynamics, UHI dependence of synoptic situations and total UHI climatology on monthly and daily averages. References: 1.Howard, L. (1833) The Climate of London, Deduced from Meteorological Observations. Volume 2, London. 2.Kukanova E.A., Konstantinov P.I. An urban heat islands climatology in Russia and linkages to the climate change In Geophysical Research Abstracts, volume 16 of EGU General Assembly, pages EGU2014-10833-1, Germany, 2014. Germany. 3.www.pogoda.ru.net

Geosciences Information for Teachers (GIFT) Workshops held in Conjunction with Alexander von Humboldt (AvH) EGU Conferences.

NASA Astrophysics Data System (ADS)

Laj, C. E.; Cifelli, F.

2014-12-01

Given the increasing success of the GIFT workshops held in conjunction with the General Assemblies, since 2010 EGU has also developed a series of GIFT workshops held in conjunction with AvH conferences. The Alexander von Humboldt Conference Series of the European Geosciences Union are a series of meetings held outside of Europe, in particular in South America, Africa or Asia, on selected topics of geosciences with a socio-economic impact for regions on these continents, jointly organised with the scientists and their institutes and the institutions of these regions. Associated GIFT workshops were held in Merida, Yucatan, on the theme of Climate Change, Natural Hazards and Societies (March 2010), then in Penang, Malaysia (June 2011) on the theme of Ocean Acidification, in November 2012 in Cusco (Peru) on the theme of Natural Disasters, Global Change and the Preservation of World Heritage Sites, finally in Istanbul (March 2014) on "High Impact Natural Hazards Related to the Euro-Mediterranean Region. The next GIFT workshop is already planned for October 2015 in Adis Ababa (Ethiopia) on the theme "Water". In each case, the GIFT workshop was held on the last two days of the AvH conference and reunited 40-45 teachers from the nation where the AvH was held. Keynote speakers from AvH were speakers to the GIFT workshops which also included hands-on activities animated by sciences educators. In 3 cases of the 4 cases, these GIFT workshops represented the first workshop specifically aimed at teachers held in the country, and therefore represents a significant Earth Sciences contribution to secondary education in non European countries.

Progress on Platforms, Sensors and Applications with Unmanned Aerial Vehicles in soil science and geomorphology

NASA Astrophysics Data System (ADS)

Anders, Niels; Suomalainen, Juha; Seeger, Manuel; Keesstra, Saskia; Bartholomeus, Harm; Paron, Paolo

2014-05-01

The recent increase of performance and endurance of electronically controlled flying platforms, such as multi-copters and fixed-wing airplanes, and decreasing size and weight of different sensors and batteries leads to increasing popularity of Unmanned Aerial Systems (UAS) for scientific purposes. Modern workflows that implement UAS include guided flight plan generation, 3D GPS navigation for fully automated piloting, and automated processing with new techniques such as "Structure from Motion" photogrammetry. UAS are often equipped with normal RGB cameras, multi- and hyperspectral sensors, radar, or other sensors, and provide a cheap and flexible solution for creating multi-temporal data sets. UAS revolutionized multi-temporal research allowing new applications related to change analysis and process monitoring. The EGU General Assembly 2014 is hosting a session on platforms, sensors and applications with UAS in soil science and geomorphology. This presentation briefly summarizes the outcome of this session, addressing the current state and future challenges of small-platform data acquisition in soil science and geomorphology.

Will Mount Etna erupt before EGU General Assembly 2017?

NASA Astrophysics Data System (ADS)

Aloisi, Marco; Cannavo', Flavio; Palano, Mimmo

2017-04-01

Mount Etna has historically recorded a long and very various series of eruptions. The eruptions have mostly shown an episodic character, despite a near continuous supply of magma. In the last years, activity at Mount Etna seems to follow a recurrent pattern characterized by very similar "inflation/paroxysmal events/deflation" dynamic. The paroxysms occurred in December 2015 and May 2016, which involved the "Voragine" crater, can be considered among the most violent observed during the last two decades. These events showed high lava fountains, in the order of hundreds of meters in height, and eruption columns, several kilometres high. A new cycle, characterized by a clear similar inflation of the whole volcano edifice is currently underway. Here, we analyse these recent volcanic cycles and discuss about a) a possible upper bound for the inflation dynamic, above which a paroxysmal event occurs, b) the comparison of the models generating the considered lava fountains and c) a possible time-predictable model of the expected paroxysmal event.

Geothermal prospection in the Greater Geneva Basin (Switzerland and France). Impact of diagenesis on reservoir properties of the Upper Jurassic carbonate sediments

NASA Astrophysics Data System (ADS)

Makhloufi, Yasin; Rusillon, Elme; Brentini, Maud; Clerc, Nicolas; Meyer, Michel; Samankassou, Elias

2017-04-01

Diagenesis of carbonate rocks is known to affect the petrophysical properties (porosity, permeability) of the host rock. Assessing the diagenetic history of the rock is thus essential when evaluating any reservoir exploitation project. The Canton of Geneva (Switzerland) is currently exploring the opportunities for geothermal energy exploitation in the Great Geneva Basin (GGB) sub-surface. In this context, a structural analysis of the basin (Clerc et al., 2016) associated with reservoir appraisal (Brentini et al., 2017) and rock-typing of reservoir bodies of potential interest were conducted (Rusillon et al., 2017). Other geothermal exploitation projects elsewhere (e.g. Bavaria, south Germany, Paris Basin, France) showed that dolomitized carbonate rocks have good reservoir properties and are suitable for geothermal energy production. The objectives of this work are to (1) describe and characterize the dolomitized bodies in the GGB and especially their diagenetic history and (2) quantify the reservoir properties of those bodies (porosity, permeability). Currently, our study focuses on the Upper Jurassic sedimentary bodies of the GGB. Field and well data show that the dolomitization is not ubiquitous in the GGB. Results from the petrographical analyses of the Kimmeridgian cores (Humilly-2) and of field analogues (Jura, Saleve and Vuache mountains) display complex diagenetic histories, dependent of the study sites. The paragenesis exhibits several stages of interparticular calcite cementation as well as different stages of dolomitization and/or dedolomitization. Those processes seem to follow constrained path of fluid migrations through burial, faulting or exhumation during the basin's history. These complex diagenetic histories affected the petrophysical and microstructural properties via porogenesis (conservation of initial porosity, moldic porosity) and/or poronecrosis events. The best reservoir properties appear to be recorded in patch reef and peri-reefal depositional environments in association with porous dolomitized intervals (Rusilloon et al., 2017). The work presented here will help to constrain and quantify reservoir heterogeneities in a complex reservoir and to provide insights into porosity and permeability distribution that will ultimately help in reservoir modeling, a crucial step for further possible exploitation. Brentini et al. 2017: Geothermal prospection in the Greater Geneva Basin: integration of geological data in the new Information System. Abstract, EGU General Assembly 2017, Vienna, Austria. Clerc et al. 2016: Structural Modeling of the Geneva Basin for Geothermal Ressource Assessment. Abstract, 14th Swiss Geoscience Meeting, Geneva, Switzerland. Rusillon et al., 2017: Geothermal prospection in the Greater Geneva Basin (Switzerland and France): structural and reservoir quality assessment. Abstract, EGU General Assembly 2017, Vienna, Austria.

Microbiological Aspects of Geothermal Energy: Influence of Microbial Activity on Scaling and Clogging in a Cold Storage

NASA Astrophysics Data System (ADS)

Lerm, Stephanie; Alawi, Mashal; Miethling-Graff, Rona; Vieth, Andrea; Seibt, Andrea; Wolfgramm, Markus; Würdemann, Hilke

2010-05-01

The development of strategies to substantially reduce emission of greenhouse gases to the atmosphere is one of the major challenges of the next decades. Therefore, the utilization of subsurface stored energy arouses increasing interest. Corrosion and scaling are major problems in geothermal operation which create significant maintenance and cleaning costs. In the scope of the research project AquiScreen the operational reliability of geothermal used aquifer systems was investigated under microbial, geochemical, mineralogical, and petrologic aspects (see also Alawi et al.; General Assembly EGU 2010). This presentation focuses on the investigation of a cold storage in Berlin (Reichstag building, depth 30-50 m). In order to evaluate the impact of microbial processes in the low saline aquifer (see also Vetter et al.; General Assembly EGU 2010), the microbial communities of fluid and filter samples were investigated by Fluorescent in situ hybridization (FISH) and DNA fingerprinting techniques based on PCR amplified partial 16S rRNA genes. Analyses of fluid samples revealed a bacterial community dominated by iron and sulfur oxidizing bacteria closely related to Siderooxidans lithoautotrophicus, Gallionella sp. and Thiotrix unzii. Scanning electron microscope analysis revealed iron hydroxide formation and precipitation in the filter of the top side facility and the well, corresponding to the abundance of iron oxidizing bacteria. Besides oxidizing bacteria sulfate reducing bacteria (SRB) were detected as well, indicating the formation of micro-habitats with divergent redox zones. After several years of operation and routine maintenance procedures the injectivity of the injection wells and the endurance of the top side facility filters were reduced drastically due to clogging. Mechanical cleaning and a disinfection treatment with hydrogen peroxide (H2O2) were successful to re-establish the injectivity of the wells. The results of the microbiological investigations prove that bacteria and their metabolic activities were involved in the decrease of filter endurances. A strong biofilm formation of filamentous sulfur-oxidizing bacteria related to Thiothrix was observed. In the course of the disinfection measure the microbial composition in the process water changed significantly. Thiothrix could not be detected any longer and the biocoenosis in the fluid was dominated now by Flavobacterium, Acidovorax as well as Alcaligenaceae related organisms. In contrast, SRB analyzed by specific dissimilatory sulfite reductase genes were hardly affected by the disinfection measures. However, even if especially SRB are considered as the most important taxonomic group for microbiologically influenced corrosion (MIC), present operational results indicate that scaling and clogging were the predominant processes for the operation of the shallow cold storage in Berlin.

Refrigeration generation using expander-generator units

NASA Astrophysics Data System (ADS)

Klimenko, A. V.; Agababov, V. S.; Koryagin, A. V.; Baidakova, Yu. O.

2016-05-01

The problems of using the expander-generator unit (EGU) to generate refrigeration, along with electricity were considered. It is shown that, on the level of the temperatures of refrigeration flows using the EGU, one can provide the refrigeration supply of the different consumers: ventilation and air conditioning plants and industrial refrigerators and freezers. The analysis of influence of process parameters on the cooling power of the EGU, which depends on the parameters of the gas expansion process in the expander and temperatures of cooled environment, was carried out. The schematic diagram of refrigeration generation plant based on EGU is presented. The features and advantages of EGU to generate refrigeration compared with thermotransformer of steam compressive and absorption types were shown, namely: there is no need to use the energy generated by burning fuel to operate the EGU; beneficial use of the heat delivered to gas from the flow being cooled in equipment operating on gas; energy production along with refrigeration generation, which makes it possible to create, using EGU, the trigeneration plants without using the energy power equipment. It is shown that the level of the temperatures of refrigeration flows, which can be obtained by using the EGU on existing technological decompression stations of the transported gas, allows providing the refrigeration supply of various consumers. The information that the refrigeration capacity of an expander-generator unit not only depends on the parameters of the process of expansion of gas flowing in the expander (flow rate, temperatures and pressures at the inlet and outlet) but it is also determined by the temperature needed for a consumer and the initial temperature of the flow of the refrigeration-carrier being cooled. The conclusion was made that the expander-generator units can be used to create trigeneration plants both at major power plants and at small energy.

The development of spheroidal bodies theory for proto-planetary dynamics problem solving

NASA Astrophysics Data System (ADS)

Krot, A. M.

2007-08-01

There is not a full statistical equilibrium in a gas-dust proto-planetary cloud because of long relaxation time for proto-planet formation in own gravitational field. This protoplanetary system behavior can be described by Jeans equation in partial derivations relatively a distribution function. The problem for finding a general solution of Jeans equation is connected directly with an analytical expression for potential of gravitational field. Thus, the determination of gravitational potential is the main problem of statistical dynamics for proto-planetary system. The work shows this task of protoplanetary dynamics can be solved on the basis of spheroidal bodies theory [1]-[4]. Within the framework of this theory, cosmological bodies have fuzzy outlines and are represented by means of spheroidal forms. The proposed theory follows from the conception for forming a spheroidal body as a proto-planet from dust-like nebula; it permits to derive the form of distribution functions for an immovable spheroidal body [1],[2] and rotating one [3],[4] as well as their density masses (gravitational potentials and strengths) and also to find the distribution function of specific angular momentum for the rotating spheroidal body [4]. References: [1] A.M.Krot, Achievement in Modern Radioelectronics, 1996, no.8, pp.66-81 (in Russian). [2] A.M.Krot, Proc. SPIE's 13thAnnual Intern.Symp. "AeroSense", Orlando, Florida, USA, 1999, vol.3710, pp.1248-1259. [3] A.M.Krot, Proc. 35th COSPAR Scientific Assembly, Paris, France, 2004, Abstract A-00162. [4] A.Krot, Proc. EGU General Assembly, Vienna, Austria, 2006, Geophys. Res. Abstracts, vol.8, A-00216; SRef-ID: 1607-7962/gra/.

Get immersed in the Soil Sciences: the first community of avatars in the EGU Assembly 2015!

NASA Astrophysics Data System (ADS)

Castillo, Sebastian; Alarcón, Purificación; Beato, Mamen; Emilio Guerrero, José; José Martínez, Juan; Pérez, Cristina; Ortiz, Leovigilda; Taguas, Encarnación V.

2015-04-01

Virtual reality and immersive worlds refer to artificial computer-generated environments, with which users act and interact as in a known environment by the use of figurative virtual individuals (avatars). Virtual environments will be the technology of the early twenty-first century that will most dramatically change the way we live, particularly in the areas of training and education, product development and entertainment (Schmorrow, 2009). The usefulness of immersive worlds has been proved in different fields. They reduce geographic and social barriers between different stakeholders and create virtual social spaces which can positively impact learning and discussion outcomes (Lorenzo et al. 2012). In this work we present a series of interactive meetings in a virtual building to celebrate the International Year of Soil to promote the importance of soil functions and its conservation. In a virtual room, the avatars of different senior researchers will meet young scientist avatars to talk about: 1) what remains to be done in Soil Sciences; 2) which are their main current limitations and difficulties and 3) which are the future hot research lines. The interactive participation does not require physically attend to the EGU Assembly 2015. In addition, this virtual building inspired in Soil Sciences can be completed with different teaching resources from different locations around the world and it will be used to improve the learning of Soil Sciences in a multicultural context. REFERENCES: Lorenzo C.M., Sicilia, M.A., Sánchez S. 2012. Studying the effectiveness of multi-user immersive environments for collaborative evaluation tasks. Computers & Education 59 (2012) 1361-1376 Schmorrow D.D. 2009. "Why virtual?" Theoretical Issues in Ergonomics Science 10(3): 279-282.

Spots of Seismic Danger Extracted by Properties of Low-Frequency Seismic Noise

NASA Astrophysics Data System (ADS)

Lyubushin, Alexey

2013-04-01

A new method of seismic danger estimate is presented which is based on using properties of low-frequency seismic noise from broadband networks. Two statistics of noise waveforms are considered: multi-fractal singularity spectrum support width D and minimum normalized entropy En of squared orthogonal wavelet coefficients. The maps of D and En are plotted in the moving time window. Let us call the regions extracted by low values of D and high values of En as "spots of seismic danger" - SSD. Mean values of D and En are strongly anti-correlated - that is why statistics D and En extract the same SSD. Nevertheless their mutual considering is expedient because these parameters are based on different approaches. The physical mechanism which underlies the method is consolidation of small blocks of the Earth's crust into the large one before the strong earthquake. This effect has a consequence that seismic noise does not include spikes which are connected with mutual movements of small blocks. The absence of irregular spikes in the noise follows the decreasing of D and increasing of entropy En. The stability in space and size of the SSD provides estimates of the place and energy of the probable future earthquake. The increasing or decreasing of SSD size and minimum or maximum values of D and En within SSD allows estimate the trend of seismic danger. The method is illustrating by the analysis of seismic noise from broadband seismic network F-net in Japan [1-5]. Statistically significant decreasing of D allowed a hypothesis about approaching Japan to a future seismic catastrophe to be formulated at the middle of 2008. The peculiarities of correlation coefficient estimate within 1 year time window between median values of D and generalized Hurst exponent allowed to make a decision that starting from July of 2010 Japan come to the state of waiting strong earthquake [3]. The method extracted a huge SSD near Japan which includes the region of future Tohoku mega-earthquake and the region of Nankai Trough. The analysis of seismic noise after March 2011 indicates increasing of probability of the 2nd mega-earthquake starting from the middle of 2013 within the region of Nankai Trough which remains to be SSD. References 1. Lyubushin A. Multifractal Parameters of Low-Frequency Microseisms // V. de Rubeis et al. (eds.), Synchronization and Triggering: from Fracture to Earthquake Processes, GeoPlanet: Earth and Planetary Sciences 1, DOI 10.1007/978-3-642-12300-9_15, Springer-Verlag Berlin Heidelberg, 2010, 388p., Chapter 15, pp.253-272. http://www.springerlink.com/content/hj2l211577533261/ 2. Lyubushin A.A. Synchronization of multifractal parameters of regional and global low-frequency microseisms - European Geosciences Union General Assembly 2010, Vienna, 02-07 of May, 2010, Geophysical Research Abstracts, Vol. 12, EGU2010-696, 2010. http://meetingorganizer.copernicus.org/EGU2010/EGU2010-696.pdf 3. Lyubushin A.A. Synchronization phenomena of low-frequency microseisms. European Seismological Commission, 32nd General Assembly, September 06-10, 2010, Montpelier, France. Book of abstracts, p.124, session ES6. http://alexeylyubushin.narod.ru/ESC-2010_Book_of_abstracts.pdf 4. Lyubushin A.A. Seismic Catastrophe in Japan on March 11, 2011: Long-Term Prediction on the Basis of Low-Frequency Microseisms - Izvestiya, Atmospheric and Oceanic Physics, 2011, Vol. 46, No. 8, pp. 904-921. http://www.springerlink.com/content/kq53j2667024w715/ 5. Lyubushin, A. Prognostic properties of low-frequency seismic noise. Natural Science, 4, 659-666.doi: 10.4236/ns.2012.428087. http://www.scirp.org/journal/PaperInformation.aspx?paperID=21656

COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": first-year activities and results

NASA Astrophysics Data System (ADS)

Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

2014-05-01

This work aims at presenting the first-year activities and results of COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar". This Action was launched in April 2013 and will last four years. The principal aim of COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. The first WG focuses on the design of innovative GPR equipment, on the building of prototypes and on the testing and optimisation of new systems. The second WG focuses on the GPR surveying of pavement, bridges, tunnels and buildings, as well as on the sensing of underground utilities and voids. The third WG deals with the development of electromagnetic forward and inverse scattering methods, for the characterization of GPR scenarios, as well as with data- processing algorithms for the elaboration of the data collected during GPR surveys. The fourth WG works on the use of GPR in fields different from the civil engineering, as well as on the integration of GPR with other non-destructive testing techniques. Each WG includes several Projects. COST Action TU1208 is active through a range of networking tools: meetings, workshops, conferences, training schools, short-term scientific missions, dissemination activities. During the first year of activities, a First General Meeting was organized in Rome, in July 2013, a second meeting took place in Nantes, in February 2014, and the Second General Meeting is being held jointly with the 2014 EGU General Assembly. A training school on "Microwave Imaging and Diagnostics: Theory, Techniques, and Applications", held in March 2014, was co-organised with the European School of Antennas. Four Short-Term Scientific Missions were funded, allowing young researchers to spend a period of time in an institution abroad, in order to carry out a research project contributing to the scientific objectives of the Action. The Action's activities were disseminated in international conferences [1]-[4], as well as in further workshops and meetings. Two volumes were published [5]-[6], and several scientific papers on peer-reviewed journals. A Springer book presenting the state of the art on civil engineering applications of Ground Penetrating Radar is being prepared and is going to be published in summer 2014. A COST Action is a wide bottom-up interdisciplinary science and technology network, open to researchers from universities, public and private research institutions, as well as to NGOs, industry and SMEs. At present, About 100 Institutions from 24 COST Member Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Switzerland, Turkey, United Kingdom) have already joined the Action, together with an Institution from Armenia (Near Neighbour Country, NNC). Beyond European borders, six Institutions from U.S.A., one from Rwanda and one from Australia have joined the Action. Further applications from two NNCs (Egypt and Ukraine) and International Partner Countries (Hong Kong and Japan) are under examination. COST Action TU1208 is still open to the participation of new parties and it is possible to include, in the scientific work plan, new perspectives and activities. Scientists and scientific institutions willing to join COST Action TU1208 are encouraged to contact the Chair of the Action and to follow the procedure described at http://www.cost.eu/participate/join_action. For more information on COST Action TU1208, please visit www.GPRadar.eu. ----------------------------- Acknowledgement The Authors thanks COST for funding COST Action TU1208. References [1] L. Pajewski, A. Benedetto, A. Loizos, E. Slob, F. Tosti, "Civil Engineering Applications of Ground Penetrating Radar: Research Perspectives in COST Action TU1208," Geophysical Research Abstracts, European Geosciences Union (EGU) General Assembly 2013, 7-12 April 2013, Vienna, Austria, article ID EGU2013-13941. [2] L. Pajewski, A. Benedetto, G. Schettini, F. Soldovieri, "Applications of GPR in archaeological prospecting and cultural heritage diagnostics: Research Perspectives in COST Action TU1208," Geophysical Research Abstracts, European Geosciences Union (EGU) General Assembly 2013, 7-12 April 2013, Vienna, Austria, article ID EGU2013-14010. [3] L. Pajewski, A. Benedetto, X. Dérobert, A. Giannopoulos, A. Loizos, G. Manacorda, M. Marciniak, C. Plati, G. Schettini, I. Trinks, "Applications of Ground Penetrating Radar in Civil Engineering - COST Action TU1208," Proc. 7th International Workshop on Advanced Ground Penetrating Radar (IWAGPR), 2-5 July 2013, Nantes, France, pp. 1-6 (INVITED). ISBN 978-1-4799-0937-7, doi:10.1109/ IWAGPR.2013.6601528). [4] L. Pajewski, A. Benedetto, "Advanced Ground Penetrating Radar: open issues and new research opportunities in Europe," Proc. 10th European Radar Conference (EuRad), 2013 European Microwave Week (EuMW), 6-11 October 2013, Nuremberg, Germany, pp. 1847-1850. [5] Proceedings of the First Action's General Meeting (Editors: L. Pajewski and A. Benedetto; Publishing House: Aracne; Rome, July 2013; 194 pp.; ISBN 978-88-548-6191-6; o.o. 978-88-548-6190-9) - available as free download on www.GPRadar.eu [6] Booklet of Participants and Institutions (Editors: L. Pajewski and A. Benedetto; Publishing House: Aracne; Rome, July 2013; 127 pp.; ISBN 978-88-548-6192-3; o.o. 978-88-548-6190-9) - available as free download on www.GPRadar.eu

GIS- and field based mapping of geomorphological changes in a glacier retreat area: A case study from the Kromer valley, Silvretta Alps (Austria)

NASA Astrophysics Data System (ADS)

Guttmann, Markus; Pöppl, Ronald

2017-04-01

Global warming results in an ongoing retreat of Alpine glaciers, leaving behind large amounts of easily erodible sediments. As a consequence processes like rockfalls, landslides and debris flows as well as fluvial processes occur more frequently in pro- and paraglacial areas, often involving catastrophic consequences for humans and infrastructure in the affected valleys. The main objective of the presented work was to map and spatially quantify glacier retreat and geomorphological changes in the Kromer valley, Silvretta Alps (Austria) by applying GIS- and field-based geomorphological mapping. In total six geomorphological maps (1950s, 1970s, 2001, 2006, 2012, and 2016) were produced and analyzed in the light of the study aim. First results have shown a significant decrease of total glaciated area from 96 ha to 53 ha which was accompanied by increased proglacial geomorphic activity (i.e. fluvial processes, rockfalls, debris flows, shallow landslides) in the last 15 years. More detailed results will be presented at the EGU General Assembly 2017.

Recent Progress on the Second Generation CMORPH: A Prototype Operational Processing System

NASA Astrophysics Data System (ADS)

Xie, Pingping; Joyce, Robert; Wu, Shaorong

2016-04-01

As reported at the EGU General Assembly of 2015, a conceptual test system was developed for the second generation CMORPH to produce global analyses of 30-min precipitation on a 0.05deg lat/lon grid over the entire globe from pole to pole through integration of information from satellite observations as well as numerical model simulations. The second generation CMORPH is built upon the Kalman Filter based CMORPH algorithm of Joyce and Xie (2011). Inputs to the system include both rainfall and snowfall rate retrievals from passive microwave (PMW) measurements aboard all available low earth orbit (LEO) satellites, precipitation estimates derived from infrared (IR) observations of geostationary (GEO) as well as LEO platforms, and precipitation simulations from numerical global models. Sub-systems were developed and refined to derive precipitation estimates from the GEO and LEO IR observations and to compute precipitating cloud motion vectors. The results were reported at the EGU of 2014 and the AGU 2015 Fall Meetings. In this presentation, we report our recent work on the construction of a prototype operational processing system for the second generation CMORPH. The second generation CMORPH prototype operational processing system takes in the passive microwave (PMW) retrievals of instantaneous precipitation rates from all available sensors, the full-resolution GEO and LEO IR data, as well as the hourly precipitation fields generated by the NOAA/NCEP Climate Forecast System (CFS) Reanalysis (CFS). First, a combined field of PMW based precipitation retrievals (MWCOMB) is created on a 0.05deg lat/lon grid over the entire globe through inter-calibrating retrievals from various sensors against a common reference. For this experiment, the reference field is the GMI based retrievals with climatological adjustment against the TMI retrievals using data over the overlapping period. Precipitation estimation is then derived from the GEO and LEO IR data through calibration against the global MWCOMB and the CloudSat CPR based estimates. At the meantime, precipitating cloud motion vectors are derived through the combination of vectors computed from the GEO IR based precipitation estimates and the CFSR precipitation with a 2DVAR technique. A prototype system is applied to generate integrated global precipitation estimates over the entire globe for a three-month period from June 1 to August 31 of 2015. Preliminary tests are conducted to optimize the performance of the system. Specific efforts are made to improve the computational efficiency of the system. The second generation CMORPH test products are compared to the first generation CMORPH and ground observations. Detailed results will be reported at the EGU.

The use of soil quality indicators to assess soil functionality in restored semi-arid ecosystems

NASA Astrophysics Data System (ADS)

Muñoz-Rojas, Miriam; Erickson, Todd E.; Dixon, Kingsley W.; Merritt, David J.

2016-04-01

Keywords: Pilbara, 1-day CO2 test, microbial activity, mine restoration, soil health, ecosystem services. Introduction Semi-arid and arid environments are highly vulnerable to land degradation and their restoration has commonly showed low rates of success (James et al., 2013). A systematic knowledge of soil functionality is critical to successful restoration of degraded ecosystems since approximately 80% of ecosystem services can be connected to soil functions. The assessment of soil functionality generally involves the evaluation of soil properties and processes as they relate to the ability of soil to function effectively as a component of a healthy ecosystem (Costantini et al., 2015) Using soil quality indicators may be a valuable approach to assess functionality of topsoil and novel substrates used in restoration (Muñoz-Rojas et al., 2014; 2015). A key soil chemical indicator is soil organic C, that has been widely used as an attribute of soil quality because of the many functions that it provides and supports (Willaarts et al., 2015). However, microbial indicators can be more sensitive to disturbances and could be a valuable addition in soil assessment studies in restoration programs. Here, we propose a set of soil quality indicators to assess the soil status in restored soils (topsoil and waste material) of semi-arid environments. The study was conducted during March 2015 in the Pilbara biogeographical region (northwestern Australia) at an iron ore mine site rehabilitated in 2011. Methods Soil samples were collected from two sub-areas with different soil materials used as growth media: topsoil retrieved from nearby stockpiles and a lateritic waste material utilised for its erosive stability and physical competence. An undisturbed natural shrub-grassland ecosystem dominated by Triodia spp. and Acacia spp. representative of the restored area was selected as the analogue reference site. Soil physicochemical analysis were undertaken according to standard methods. Soil microbial activity was measured with the 1-day CO2 test, a cost-effective and rapid method to determine soil microbial respiration rate based on the measurement of the CO2 burst produced after moistening dry soil (Muñoz-Rojas et al., 2016). Soil microbial abundance of specific groups was measured by phospholipid fatty acid analysis. Results and discussion We showed that in addition to organic C and C:N ratio, biological indicators (microbial diversity and activity in particular), are the most sensitive indicators to detect differences among reconstructed soils and analogue undisturbed soils in semi-arid areas. The 1-day CO2 test is an alternative cost- and time-effective method to measure microbial activity and assess soil functionality of restored soils. Our results also showed a positive effect of vegetation on reconstructed soils and a recovery of soil functionality in waste material to levels similar to topsoil once vegetation is established, although soil quality levels are still far from those in undisturbed native soils four years post-restoration. Soil functionality is critical in the restoration process, particularly in semi-arid areas, and the methods used here could be effectively applied in a broad range of restoration projects in arid and semi-arid environments. References Costantini EAC, Branquinho C, Nunes A, Schwilch G, Stavi I, Valdecantos A and Zucca C (2015) Soil indicators to assess the effectiveness of restoration strategies in dryland ecosystems. Solid Earth Discussions 7:3645-3687. James JJ, Sheley RL, EricksonT, Rollins KS, Taylor MH, Dixon KW (2013) A systems approach to restoring degraded drylands. Journal of Applied Ecology 50:730-739. Muñoz-Rojas M., Erickson T, Merritt D, Dixon K (2014) Optimising post-mining soil conditions to maximise restoration success in a biodiverse semiarid environment. Geophysical Research. Abstracts Vol. 16, EGU2014-2069-1, EGU General Assembly. Muñoz-Rojas M, Erickson T, Merritt D, Dixon K (2015) Applying soil science for restoration of post mining degraded landscapes in semi-arid Australia: challenges and opportunities. Geophysical Research. Abstracts Vol. 17, EGU2015-3967-1, EGU General Assembly. Muñoz-Rojas M, Erickson TE, Martini D, Dixon KW, Merritt DJ (2016) Soil physicochemical and microbiological indicators of short, medium and long term post-fire recovery in semi-arid ecosystems. Ecological indicators 63:14-22. Willaarts BA, Oyonarte C, Muñoz-Rojas M., Ibáñez JJ and Aguilera PA (2015) Environmental Factors Controlling Soil Organic Carbon Stocks in Two Contrasting Mediterranean Climatic Areas of Southern Spain. Land Degradation and Development (on-line). DOI: 10.1002/ldr.2417

Recent activities of the Seismology Division Early Career Representative(s)

NASA Astrophysics Data System (ADS)

Agius, Matthew; Van Noten, Koen; Ermert, Laura; Mai, P. Martin; Krawczyk, CharLotte

2016-04-01

The European Geosciences Union is a bottom-up-organisation, in which its members are represented by their respective scientific divisions, committees and council. In recent years, EGU has embarked on a mission to reach out for its numerous 'younger' members by giving awards to outstanding young scientists and the setting up of Early Career Scientists (ECS) representatives. The division representative's role is to engage in discussions that concern students and early career scientists. Several meetings between all the division representatives are held throughout the year to discuss ideas and Union-wide issues. One important impact ECS representatives have had on EGU is the increased number of short courses and workshops run by ECS during the annual General Assembly. Another important contribution of ECS representatives was redefining 'Young Scientist' to 'Early Career Scientist', which avoids discrimination due to age. Since 2014, the Seismology Division has its own ECS representative. In an effort to more effectively reach out for young seismologists, a blog and a social media page dedicated to seismology have been set up online. With this dedicated blog, we'd like to give more depth to the average browsing experience by enabling young researchers to explore various seismology topics in one place while making the field more exciting and accessible to the broader community. These pages are used to promote the latest research especially of young seismologists and to share interesting seismo-news. Over the months the pages proved to be popular, with hundreds of views every week and an increased number of followers. An online survey was conducted to learn more about the activities and needs of early career seismologists. We present the results from this survey, and the work that has been carried out over the last two years, including detail of what has been achieved so far, and what we would like the ECS representation for Seismology to achieve. Young seismologists are continuously encouraged to voice their ideas and contribute to the Seismology Division.

Results from the latest SN-4 multi-parametric benthic observatory experiment (MARsite EU project) in the Gulf of Izmit, Turkey: oceanographic, chemical and seismic monitoring

NASA Astrophysics Data System (ADS)

Embriaco, Davide; Marinaro, Giuditta; Frugoni, Francesco; Giovanetti, Gabriele; Monna, Stephen; Etiope, Giuseppe; Gasperini, Luca; Çağatay, Namık; Favali, Paolo

2015-04-01

An autonomous and long-term multiparametric benthic observatory (SN-4) was designed to study gas seepage and seismic energy release along the submerged segment of the North Anatolian Fault (NAF). Episodic gas seepage occurs at the seafloor in the Gulf of Izmit (Sea of Marmara, NW Turkey) along this submerged segment of the NAF, which ruptured during the 1999 Mw7.4 Izmit earthquake. The SN-4 observatory already operated in the Gulf of Izmit at the western end of the 1999 Izmit earthquake rupture for about one-year at 166 m water depth during the 2009-2010 experiment (EGU2014-13412-1, EGU General Assembly 2014). SN-4 was re-deployed in the same site for a new long term mission (September 2013 - April 2014) in the framework of MARsite (New Directions in Seismic Hazard assessment through Focused Earth Observation in the Marmara Supersite, http://marsite.eu/ ) EC project, which aims at evaluating seismic risk and managing of long-term monitoring activities in the Marmara Sea. A main scientific objective of the SN-4 experiment is to investigate the possible correlations between seafloor methane seepage and release of seismic energy. We used the same site of the 2009-2010 campaign to verify both the occurrence of previously observed phenomena and the reliability of results obtained in the previous experiment (Embriaco et al., 2014, doi:10.1093/gji/ggt436). In particular, we are interested in the detection of gas release at the seafloor, in the role played by oceanographic phenomena in this detection, and in the association of gas and seismic energy release. The scientific payload included, among other instruments, a three-component broad-band seismometer, and gas and oceanographic sensors. We present a technical description of the observatory, including the data acquisition and control system, results from the preliminary analysis of this new multidisciplinary data set, and a comparison with the previous experiment.

New Carbonate Standard Reference Materials for Boron Isotope Geochemistry

NASA Astrophysics Data System (ADS)

Stewart, J.; Christopher, S. J.; Day, R. D.

2015-12-01

The isotopic composition of boron (δ11B) in marine carbonates is well established as a proxy for past ocean pH. Yet, before palaeoceanographic interpretation can be made, rigorous assessment of analytical uncertainty of δ11B data is required; particularly in light of recent interlaboratory comparison studies that reported significant measurement disagreement between laboratories [1]. Well characterised boron standard reference materials (SRMs) in a carbonate matrix are needed to assess the accuracy and precision of carbonate δ11B measurements throughout the entire procedural chemistry; from sample cleaning, to ionic separation of boron from the carbonate matrix, and final δ11B measurement by multi-collector inductively coupled plasma mass spectrometry. To date only two carbonate reference materials exist that have been value-assigned by the boron isotope measurement community [2]; JCp-1 (porites coral) and JCt-1 (Giant Clam) [3]. The National Institute of Standards and Technology (NIST) will supplement these existing standards with new solution based inorganic carbonate boron SRMs that replicate typical foraminiferal and coral B/Ca ratios and δ11B values. These new SRMs will not only ensure quality control of full procedural chemistry between laboratories, but have the added benefits of being both in abundant supply and free from any restrictions associated with shipment of biogenic samples derived from protected species. Here we present in-house δ11B measurements of these new boron carbonate SRM solutions. These preliminary data will feed into an interlaboratory comparison study to establish certified values for these new NIST SRMs. 1. Foster, G.L., et al., Chemical Geology, 2013. 358(0): p. 1-14. 2. Gutjahr, M., et al., Boron Isotope Intercomparison Project (BIIP): Development of a new carbonate standard for stable isotopic analyses. Geophysical Research Abstracts, EGU General Assembly 2014, 2014. 16(EGU2014-5028-1). 3. Inoue, M., et al., Geostandards and Geoanalytical Research, 2004. 28(3): p. 411-416.

High-resolution δ13C record of fossil wood and bulk organic matter from a deep Oligocene lacustrine succession, Bach Long Vi Island, Vietnam

NASA Astrophysics Data System (ADS)

Rizzi, M.; Schovsbo, N. H.; Fyhn, M. B. W.; Korte, C.

2017-12-01

We present a high-resolution stable isotope record based on bulk organic matter (δ13Corg) and fossil wood (δ13Cwood) originating from Oligocene deep lacustrine sediments cored on the Bach Long Vi Island, northern Gulf of Tonkin, offshore Vietnam. The sediments are exceptionally well preserved. They are thus excellently suited for a detailed stratigraphical analysis of the stable isotope record and as proxy for environmental and climatic changes within this period. The sediments were deposited in rapid subsiding, narrow and elongated fault-bound graben (Fyhn and Phach, 2015) and are represented by deep pelagic lacustrine organic-rich mud interrupted by numerous density-flow deposits (Hovikoski et al., 2016). The density-flow deposits contain abundant fragments of fossil wood. Therefore it was possible to obtain 262 coalified wood fragments together with 1063 bulk organic samples throughout the span of the core. This allowed to establish a high resolution stable C isotope record (δ13Corg and δ13Cwood). In addition 2464 handheld XRF determinations were carried out to further characterize the depositional environment (Rizzi et al., 2017). The organic carbon isotope trend from the 500 m core succession provides insight into the palaeoenvironmental changes of the lake during the Oligocene. Both, global and local factors control the δ13C variations. The aim of the study is to obtain pure global δ13Corg and δ13Cwood signals that would allow comparison of the studied sediments with coeval syn-rift successions in the South China Sea region and other parts of the world. [1] Fyhn and Phach (2015) Tectonics, 34(2): 290-312. [2] Hovikoski et al. (2016) Journal of Sedimentary Research, 86(8): 982-1007. [3] Rizzi et al. (2017) EGU General Assembly Abstract EGU 2017-17584.

Embedded Gaussian unitary ensembles with U(Ω)⊗SU(r) embedding generated by random two-body interactions with SU(r) symmetry

NASA Astrophysics Data System (ADS)

Vyas, Manan; Kota, V. K. B.

2012-12-01

Following the earlier studies on embedded unitary ensembles generated by random two-body interactions [EGUE(2)] with spin SU(2) and spin-isospin SU(4) symmetries, developed is a general formulation, for deriving lower order moments of the one- and two-point correlation functions in eigenvalues, that is valid for any EGUE(2) and BEGUE(2) ("B" stands for bosons) with U(Ω)⊗SU(r) embedding and with two-body interactions preserving SU(r) symmetry. Using this formulation with r = 1, we recover the results derived by Asaga et al. [Ann. Phys. (N.Y.) 297, 344 (2002)], 10.1006/aphy.2002.6248 for spinless boson systems. Going further, new results are obtained for r = 2 (this corresponds to two species boson systems) and r = 3 (this corresponds to spin 1 boson systems).

First-order reversal curves of single domain particles: diluted random assemblages and chains

NASA Astrophysics Data System (ADS)

Egli, R.

2009-04-01

Exact magnetic models can be used to calculate first-order reversal curves (FORC) of single domain (SD) particle assemblages, as shown by Newell [2005] for the case of isolated Stoner-Wohlfarth particles. After overcoming experimental difficulties, a FORC diagram sharing many similarities to Newell's model has been measured on a lake sediment sample (see A.P. Chen et al., "Quantification of magnetofossils using first-order reversal curves", EGU General Assembly 2009, Abstracts Vol. 11, EGU2009-10719). This sample contains abundant magnetofossils, as shown by coercivity analysis and electron microscopy, therefore suggesting that well dispersed, intact magnetosome chains are the main SD carriers. Subtle differences between the reversible and the irreversible contributions of the measured FORC distribution suggest that magnetosome chains might not be correctly described by the Stoner-Wohlfarth model. To better understand the hysteresis properties of such chains, a simple magnetic model has been implemented, taking dipole-dipole interactions between particles within the same chain into account. The model results depend on the magnetosome elongation, the number of magnetosomes in a chain, and the gap between them. If the chain axis is subparallel to the applied field, the magnetic moment reverses by a pseudo-fanning mode, which is replaced by a pseudo-coherent rotation mode at greater angles. These reversal modes are intrinsically different from coherent rotation assumed Stoner-Wohlfarth model, resulting in FORC diagrams with a smaller reversible component. On the other hand, isolated authigenic SD particles can precipitate in the sediment matrix, as it might occur for pedogenic magnetite. In this case, an assembly of randomly located particles provides a possible model for the resulting FORC diagram. If the concentration of the particles is small, each particle is affected by a random interaction field whose statistical distribution can be calculated from first principles. In this case, the irreversible component of the FORC diagram, which is described by a Dirac delta function in the non-interacting case, converts into a continuous function that directly reflects the distribution of interaction fields. Such models provide a way to identify and characterize authigenic SD particles in sediments, and in some case allow one to isolate their magnetic contribution from that of other magnetic components. Newell, A.J. (2005), A high-precision model of first-order reversal curve (FORC) functions for single-domain ferromagnets with uniaxial anisotropy, Gechem. Geophys. Geosyst., 6, Q05010, doi:10.1029/2004GC00877.

The SAWO (Small And Well Organized) avatar teaches the importance of the aggregates on the soil system and how to determine their stability

NASA Astrophysics Data System (ADS)

Mataix-Solera, Jorge; Cerdà, Artemi; Jordán, Antonio; Úbeda, Xavier; Pereira, Paulo

2015-04-01

Soil structure is the key factor that determine the soil quality as control the organic matter turnnover, soil biology and soil erodibility (Cerdà, 1996; 1998; Wick et al., 2014; Gelaw, 2015). There is a need to understand better the factors and the processes that act on the soil aggregation and the dynamics of the soil aggregation, which will make easier to understand the soil system functioning (Jordán et al., 2011; Jordán et al., 2012; Pulido Moncada et al., 2013). Fire, mines, grazing and agricultura (Cerdà, 2000; Mataix Solera et al., 2011; Cerdà et al., 2012; Hallett et al., 2014; Lozano et al., 2013) determines how the soil structure is highly affected by the humankind. And this determines the sustainability of the land managements (García Orenes et al., 2012; K¨ropfl et al., 2013; Mekuria and Aynekulu, 2013; Taguas et al., 2013; Zhao et al., 2013). Aggregates are Small And Well Organized (SAWO) structures that allow the water to flow, the air fill the porous and the life to be diverse and abundant in the soil. The SAWO avatar will teach the importance of the functions and the services of the aggregates to students and other scientists, but also to any audience. This means that the experiments and the vocabulary to be used by SAWO will be very wide and rich. The Avatar SAWO will use different strategies and skills to teach the soil aggregation properties and characteristics. And also, how to measure. Easy to carry out experiments will be shown by SAWO to measure the aggregate stability in the field and in the laboratory, and the soil sampling in the field. The SAWO avatar will play a special attention to the impact of forest fires on aggregate stability changes and how to measure. The SAWO avatar will teach how to take samples in the field, how to transport and manage in the laboratory, and finally which measurements and test can be done to determine the aggregate stability. Acknowledgements To the "Ministerio de Economía and Competitividad" of Spanish Government for finance the POSTFIRE project (CGL2013- 47862-C2-1-R). The research projects GL2008-02879/BTE, LEDDRA 243857 and PREVENTING AND REMEDIATING DEGRADATION OF SOILS IN EUROPE THROUGH LAND CARE (RECARE)FP7-ENV-2013- supported this research. References Cerdà, A. 1996. Soil aggregate stability in three mediterranean environments. Soil Technology, 9, 129-133. Cerdà, A. 1998. Soil aggregate stability under different Mediterranean vegetation types. Catena, 32, 73-86. Cerdà, A. 2000. Aggregate stability against water forces under different climates on agriculture land and scrubland in southern Bolivia. Soil and Tillage Research, 36, 1- 8. Cerdà, A., Mataix-Solera, J., Arcenegui, V. (2012, April). Aggregate stability in citrus plantations. The impact of drip irrigation. In EGU General Assembly Conference Abstracts (Vol. 14, p. 3772). García-Orenes, F., Roldán, A., Mataix-Solera, J., Cerdà, A., Campoy, M., Arcenegui, V., Caravaca, F. 2012. Soil structural stability and erosion rates influenced by agricultural management practices in a semi-arid Mediterranean agro-ecosystem. Soil Use and Management 28(4): 571-579. DOI: 10.1111/j.1475-2743.2012.00451.x Gelaw, A. M., Singh, B. R., Lal, R. 2015. Organic carbon and nitrogen associated with soil aggregates and particle sizes under different land uses in Tigray, northern Ethiopia. Land Degradation & Development.DOI: 10.1002/ldr.2261 Hallett, P., Ogden, M., Karim, K., Schmidt, S., Yoshida, S. (2014, May). Beneath aggregate stability-quantifying thermodynamic properties that drive soil structure dynamics. In EGU General Assembly Conference Abstracts (Vol. 16, p. 10792). Jordán, A., Zavala, L. M., Mataix-Solera, J., Nava, A. L., Alanís, N. (2011). Effect of fire severity on water repellency and aggregate stability on Mexican volcanic soils. Catena, 84(3), 136-147. Jordan, M., Garcia-Orenes, F., Mataix-Solera, J., Garcia-Sanchez, E. (2012, April). Evaluation of the physical properties, bulk density and aggregate stability of potential substrates in quarry restoration. In EGU General Assembly Conference Abstracts (Vol. 14, p. 1110). Kröpfl, A. I., Cecchi, G. A., Villasuso, N. M., Distel, R. A. 2013. Degradation and recovery processes in Semi-Arid patchy rangelands of northern Patagonia, Argentina. Land Degradation & Development, 24: 393- 399. DOI 10.1002/ldr.1145 Lozano, E., Temporal, B., Oltra, Á., Mataix-Solera, J., Arcenegui, V., García-Orenes, F. (2013, April). Effect of freeze-thawing on aggregate stability in a calcareous Mediterranean soil. In EGU General Assembly Conference Abstracts (Vol. 15, p. 1483). Mataix-Solera, J., Cerdà, A., Arcenegui, V., Jordán, A., Zavala, L.M. 2011 Fire effects on soil aggregation: a review. Earth-Science Reviews 109: 44-60 http://dx.doi.org/10.1016/j.earscirev.2011.08.002 Mekuria, W., Aynekulu, E. 2013. Exclosure land management for restoration of the soils in degrade communal grazing lands in Northern Ethiopia. Land Degradation & Development, 24: 528- 538. DOI 10.1002/ldr.1146 Pulido Moncada, M., Gabriels, D., Cornelis, W., Lobo, D. 2013. Comparing aggregate stability tests for soil physical quality indicators. Land Degradation & Development.| DOI: 10.1002/ldr.2225 Taguas, E. V., Carpintero, E., and Ayuso, J. L. 2013. Assessing land degradation risk through the long-term analysis of erosivity: a case study in Southern Spain. Land Degradation & Development, 24: 179- 187. DOI 10.1002/ldr.1119 Wick, A.F., Daniels, W.L. Nash, W.L. a Burger, J.A. 2014. Aggregate recovery in reclaimed coal mine soils of SW Virginia. Land Degradation and Development. 2014. DOI: 10.1002/ldr.2309S Zhao, G., Mu, X., Wen, Z., Wang, F., and Gao, P. 2013. Soil erosion, conservation, and Eco-environment changes in the Loess Plateau of China. Land Degradation & Development, 24: 499- 510. DOI 10.1002/ldr.2246

Vertical profiles for SO2 and SO on Venus from different one-dimensional simulations

NASA Astrophysics Data System (ADS)

Mills, Franklin P.; Jessup, Kandis-Lea; Yung, Yuk

2017-10-01

Sulfur dioxide (SO2) plays many roles in Venus’ atmosphere. It is a precursor for the sulfuric acid that condenses to form the global cloud layers and is likely a precursor for the unidentified UV absorber, which, along with CO2 near the tops of the clouds, appears to be responsible for absorbing about half of the energy deposited in Venus’ atmosphere [1]. Most published simulations of Venus’ mesospheric chemistry have used one-dimensional numerical models intended to represent global-average or diurnal-average conditions [eg, 2, 3, 4]. Observations, however, have found significant variations of SO and SO2 with latitude and local time throughout the mesosphere [eg, 5, 6]. Some recent simulations have examined local time variations of SO and SO2 using analytical models [5], one-dimensional steady-state solar-zenith-angle-dependent numerical models [6], and three-dimensional general circulation models (GCMs) [7]. As an initial step towards a quantitative comparison among these different types of models, this poster compares simulated SO, SO2, and SO/SO2 from global-average, diurnal-average, and solar-zenith-angle (SZA) dependent steady-state models for the mesosphere.The Caltech/JPL photochemical model [8] was used with vertical transport via eddy diffusion set based on observations and observationally-defined lower boundary conditions for HCl, CO, and OCS. Solar fluxes are based on SORCE SOLSTICE and SORCE SIM measurements from 26 December 2010 [9, 10]. The results indicate global-average and diurnal-average models may have significant limitations when used to interpret latitude- and local-time-dependent observations of SO2 and SO.[1] Titov D et al (2007) in Exploring Venus as a Terrestrial Planet, 121-138. [2] Zhang X et al (2012) Icarus, 217, 714-739. [3] Krasnopolsky V A (2012) Icarus, 218, 230-246. [4] Parkinson C D et al (2015) Planet Space Sci, 113-114, 226-236. [5] Sandor B J et al (2010) Icarus, 208, 49-60. [6] Jessup K-L et al (2015) Icarus, 258, 309-336. [7] Stolzenbach A et al (2014) EGU General Assembly 2014, 16, EGU2014-5315. [8] Allen M et al (1981) J Geophys Res, 86, 3617-3627. [9] Harder J W et al (2010) Sol Phys, 263, 3-24. [10] Snow M et al (2005) Sol Phys, 230, 295-324.

Numerical modelling of river morphodynamics: Latest developments and remaining challenges

NASA Astrophysics Data System (ADS)

Siviglia, Annunziato; Crosato, Alessandra

2016-07-01

Numerical morphodynamic models provide scientific frameworks for advancing our understanding of river systems. The research on involved topics is an important and socially relevant undertaking regarding our environment. Nowadays numerical models are used for different purposes, from answering questions about basic morphodynamic research to managing complex river engineering problems. Due to increasing computer power and the development of advanced numerical techniques, morphodynamic models are now more and more used to predict the bed patterns evolution to a broad spectrum of spatial and temporal scales. The development and the success of application of such models are based upon a wide range of disciplines from applied mathematics for the numerical solution of the equations to geomorphology for the physical interpretation of the results. In this light we organized this special issue (SI) soliciting multidisciplinary contributions which encompass any aspect needed for the development and applications of such models. Most of the papers in the SI stem from contributions to session HS9.5/GM7.11 on numerical modelling and experiments in river morphodynamics at the European Geosciences Union (EGU) General Assembly held in Vienna, April 27th to May 2nd 2014.

LUCHS - an approach to introduce Land Use Changes in a regional climate models by using EO data

NASA Astrophysics Data System (ADS)

Preuschmann, S.; Jacob, D.

2012-04-01

Changes in the albedo are influencing climate simulations, which is shown by the results of e.g.: Pongratz et al. (2009), Preuschmann and Jacob (2008), Rechid and Jacob (2006), Vamborg et al. (2011). To investigate the land atmosphere interaction for regional aspects, the lower boundary description for climate models should be able to represent a realistic seasonal cycle of the physical attributed parameters, as albedo, Leaf Area Index and vegetation ratio. The description of the lower boundary for the REgional MOdel REMO has discrepancies for the albedo seasonal cycle. In comparison to satellite observation data, the amplitude and phase of the albedo climatology are showing a too homogeneous pattern. Additionally in case of land use change studies, the parametrization scheme is mixing different constant data sets. Changes in one of them can lead to unexpected values. These aspects are demanding a new approach instead of an adaptation of representing the lower boundary for REMO. A new approach called Land Use CHaracter Shifts (LUCHS), combines techniques of remote sensing techniques and climate modelling techniques. Land cover maps derived from satellite data, are used to get information for each land cover type. Therefore a characteristic albedo climatology gets extracted for every land cover type, which reflects exactly the regional dependent amplitude, phase and level of the seasonal albedo cycle. The extracted information is used as a master information. It is transferalbe onto areas, which are defined as extension areas. To keep regional specific conditions, an autochthonous information is integrated within the character shifting method. It results in a albedo distribution, which reflects characteristics of the transferred land cover type, and accounts implicitly to regional floral, soil and cultural specifications. LUCHS is not free of assumptions and uncertainties, but by using observations, it is reflects a realistic albedo. The observed information on characteristics is regionally specific but persistent in time. Therefore it is transferable through space and at least for ±50 years in time. Pongratz, J., T. Raddatz, C. H. Reick, M. Esch and M. Claussen (2009). Radiative forcing from anthropogenic land cover change since AD 800. Geophysical Research Letters, 36, L02709. Vamborg, F. S. E., V. Brovkin and M. Claussen (2011). The effect of a dynamic background albedo scheme on Sahel/Sahara precipitation during the mid-Holocene. Climate Of The Past, 7(1), 117-131. Preuschmann, S. and D. Jacob (2008). Sensitivity study for parameterization of woods in the regional climate model REMO. In Geophysical Research Abstracts, Vol. 10, EGU2008-A-08618, 2008 SRef-ID: 1607-7962/gra/EGU2008-A-08618 EGU General Assembly 2008.

Generalizing roughness: experiments with flow-oriented roughness

NASA Astrophysics Data System (ADS)

Trevisani, Sebastiano

2015-04-01

Surface texture analysis applied to High Resolution Digital Terrain Models (HRDTMs) improves the capability to characterize fine-scale morphology and permits the derivation of useful morphometric indexes. An important indicator to be taken into account in surface texture analysis is surface roughness, which can have a discriminant role in the detection of different geomorphic processes and factors. The evaluation of surface roughness is generally performed considering it as an isotropic surface parameter (e.g., Cavalli, 2008; Grohmann, 2011). However, surface texture has often an anisotropic character, which means that surface roughness could change according to the considered direction. In some applications, for example involving surface flow processes, the anisotropy of roughness should be taken into account (e.g., Trevisani, 2012; Smith, 2014). Accordingly, we test the application of a flow-oriented directional measure of roughness, computed considering surface gravity-driven flow. For the calculation of flow-oriented roughness we use both classical variogram-based roughness (e.g., Herzfeld,1996; Atkinson, 2000) as well as an ad-hoc developed robust modification of variogram (i.e. MAD, Trevisani, 2014). The presented approach, based on a D8 algorithm, shows the potential impact of considering directionality in the calculation of roughness indexes. The use of flow-oriented roughness could improve the definition of effective proxies of impedance to flow. Preliminary results on the integration of directional roughness operators with morphometric-based models, are promising and can be extended to more complex approaches. Atkinson, P.M., Lewis, P., 2000. Geostatistical classification for remote sensing: an introduction. Computers & Geosciences 26, 361-371. Cavalli, M. & Marchi, L. 2008, "Characterization of the surface morphology of an alpine alluvial fan using airborne LiDAR", Natural Hazards and Earth System Science, vol. 8, no. 2, pp. 323-333. Grohmann, C.H., Smith, M.J., Riccomini, C., 2011. Multiscale Analysis of Topographic Surface Roughness in the Midland Valley, Scotland. IEEE Transactions on Geoscience and Remote Sensing 49, 1220-1213. Herzfeld, U.C., Higginson, C.A., 1996. Automated geostatistical seafloor classification - Principles, parameters, feature vectors, and discrimination criteria. Computers and Geosciences, 22 (1), pp. 35-52. Smith, M.W. 2014, "Roughness in the Earth Sciences", Earth-Science Reviews, vol. 136, pp. 202-225. Trevisani, S., Cavalli, M. & Marchi, L. 2012, "Surface texture analysis of a high-resolution DTM: Interpreting an alpine basin", Geomorphology, vol. 161-162, pp. 26-39. Trevisani S., Rocca M., 2014. Geomorphometric analysis of fine-scale morphology for extensive areas: a new surface-texture operator. Geophysical Research Abstracts, Vol. 16, EGU2014-5612, 2014. EGU General Assembly 2014.

Geosciences Information for Teachers (GIFT) in Catalonia

NASA Astrophysics Data System (ADS)

Camerlenghi, Angelo; Cacho, Isabel; Calvo, Eva; Demol, Ben; Sureda, Catalina; Artigas, Carme; Vilaplana, Miquel; Porbellini, Danilo; Rubio, Eduard

2010-05-01

CATAGIFT is the acronym of the project supported by the Catalan Government (trough the AGAUR agency) to support the activities of the EGU Committee on Education in Catalonia. The objective of this project is two-fold: 1) To establish a coordinated action to support the participation of three Catalan science teachers of primary and secondary schools in the GIFT Symposium, held each year during the General Assembly of the European Geosciences Union (EGU). 2) To produce a video documentary each year on hot topics in geosciences. The documentary is produced in Catalan, Spanish and English and is distributed to the Catalan science teachers attending the annual meeting organized by the Institute of Education Sciences and the Faculty of Geology of the University together with the CosmoCaixa Museum of Barcelona, to the international teachers attending the EGU GIFT Workshop, and to other schools in the Spanish territory. In the present-day context of science dissemination through documentaries and television programs there is a dominance of products of high technical quality and very high costs sold and broadcasted world wide. The wide spread of such products tends to standardize scientific information, not only in its content, but also in the format used for communicating science to the general public. In the field of geosciences in particular, there is a scarcity of products that combine high scientific quality and accessible costs to illustrate aspects of the natural life of our planet Earth through the results of the work of individual researchers and / or research groups. The scientific documentaries produced by CATAGIFT pursue the objective to support primary and secondary school teachers to critically interpret scientific information coming from the different media (television, newspapers, magazines, audiovisual products), in a way that they can transmit to their students. CataGIFT has created a series of documentaries called MARENOSTRUM TERRANOSTRA designed and produced by a team of researchers of the Marine Geosciences Research Group of the University of Barcelona, high school teachers, and professionals of multimedia communication. Key aspects of the documentaries are: - Easy language and international accessibility (Catalan, Spanish and English language); - Addressing of hot topics and highly debated issues in geosciences; - Use of the proximity of researchers to the citizens (the story is told with the help of real scientists accessible by the citizen); - Use of video footage recorded by scientists specifically trained to do so during their field work; - Avoidance of catastrophism and excessive dramatization of scientific problems; - Use of slow times and emphasis on the aspects of contemplation, beauty, and astonishment in the daily work of geoscientists. MARENOSTRUM TERRANOSTRA production to date: Ice: The historian of the Earth. 2008. DVD PAL, colour, 27 min. Directed by D. Porbellini (Cultormedia). Catalan, Castellan, English. 20 thousand years. The history of the last big natural climate change of the earth. 2009. DVD PAL, colour, 25 min. Directed by D. Porbellini (Cultormedia). Catalan, Castellan, English. Hidden Corals. 2010 (release date May 2010). DVD PAL, colour, 30 min. Directed by D. Porbellini (Cultormedia). Catalan, Castellan, English.

77 FR 39177 - Approval and Promulgation of Air Quality Implementation Plans; Ohio; Regional Haze

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-02

... of SO 2 from each of 167 stacks in 19 states, 28 percent control of non-EGU SO 2 emissions, and... INFORMATION CONTACT: Charles Hatten, Environmental Engineer, Control Strategies Section, Air Programs Branch... Directors Consortium (LADCO), Ohio identified one non-electric generating unit (non-EGU) source, P.H...

Sensitivity study of the wet deposition schemes in the modelling of the Fukushima accident.

NASA Astrophysics Data System (ADS)

Quérel, Arnaud; Quélo, Denis; Roustan, Yelva; Mathieu, Anne; Kajino, Mizuo; Sekiyama, Thomas; Adachi, Kouji; Didier, Damien; Igarashi, Yasuhito

2016-04-01

The Fukushima-Daiichi release of radioactivity is a relevant event to study the atmospheric dispersion modelling of radionuclides. Actually, the atmospheric deposition onto the ground may be studied through the map of measured Cs-137 established consecutively to the accident. The limits of detection were low enough to make the measurements possible as far as 250km from the nuclear power plant. This large scale deposition has been modelled with the Eulerian model ldX. However, several weeks of emissions in multiple weather conditions make it a real challenge. Besides, these measurements are accumulated deposition of Cs-137 over the whole period and do not inform of deposition mechanisms involved: in-cloud, below-cloud, dry deposition. A comprehensive sensitivity analysis is performed in order to understand wet deposition mechanisms. It has been shown in a previous study (Quérel et al, 2016) that the choice of the wet deposition scheme has a strong impact on the assessment of the deposition patterns. Nevertheless, a "best" scheme could not be highlighted as it depends on the selected criteria: the ranking differs according to the statistical indicators considered (correlation, figure of merit in space and factor 2). A possibility to explain the difficulty to discriminate between several schemes was the uncertainties in the modelling, resulting from the meteorological data for instance. Since the move of the plume is not properly modelled, the deposition processes are applied with an inaccurate activity in the air. In the framework of the SAKURA project, an MRI-IRSN collaboration, new meteorological fields at higher resolution (Sekiyama et al., 2013) were provided and allows to reconsider the previous study. An updated study including these new meteorology data is presented. In addition, a focus on several releases causing deposition in located areas during known period was done. This helps to better understand the mechanisms of deposition involved following the Fukushima release. Quérel et al, 2016, accepted for publication in IJEP Sekiyama et al., 2013, Ensemble simulation of the atmospheric radionuclides discharged by the Fukushima nuclear accident. Presented at the EGU General Assembly, Vienne, pp. EGU2013-1695.

40 CFR Appendix B to Part 97 - Final Section 126 Rule: Non-EGU Allocations, 2004-2007

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Final Section 126 Rule: Non-EGU Allocations, 2004-2007 B Appendix B to Part 97 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... COASTAL EAGLE POINT OIL COMPAN 55004 001 3 NJ Gloucester COASTAL EAGLE POINT OIL COMPAN 55004 038 11 NJ...

Glacier retreat and associated sediment dynamics in proglacial areas: a case study from the Silvretta Alps, Austria

NASA Astrophysics Data System (ADS)

Felbauer, Lucia; Pöppl, Ronald

2016-04-01

Global warming results in an ongoing retreat of glaciers in the Alps, leaving behind large amounts of easily erodible sediments. In addition, the debuttressing of rock-walls and the decay of permafrost in the high mountain regions facilitates mass movements of potential disastrous consequences, such as rock falls, landslides and debris flows. Therefore, it is highly important to quantify the amount of sediments that are supplied from the different compartments and to investigate how glacial retreat influences sediment dynamics in proglacial areas. In the presented work glacier retreat and associated sediment dynamics were investigated in the Kromer valley (Silvretta Alps, Austria) by analyzing remote sensing data. Glacial retreat from the period of 1950 to 2012 was documented by interpreting aerial photographs. By digitizing the different stages of the glaciers for six time frames, changes in glacier area and length were mapped and quantified. In order to identify, characterize and quantify sediment dynamics in the proglacial areas a high resolution DEM of difference (DoD) between 2007 and 2012 was created and analyzed, further differentiating between different zones (e.g. valley bottom, hillslope) and types of geomorphic processes (e.g. fluvial, gravitational). First results will be presented at the EGU General Assembly 2016.

Impacts of interstate transport of pollutants on high ozone events over the Mid-Atlantic United States

NASA Astrophysics Data System (ADS)

Liao, Kuo-Jen; Hou, Xiangting; Baker, Debra Ratterman

2014-02-01

The impacts of interstate transport of anthropogenic nitrogen oxides (NOx) and volatile organic compound (VOC) emissions on peak ozone formation in four nonattainment areas (i.e., Baltimore, Philadelphia-Wilmington-Atlantic City, Pittsburgh-Beaver Valley and Washington, DC) in the Mid-Atlantic U.S. were quantified in this study. Regional air quality and sensitivities of ground-level ozone to emissions from four regions in the eastern U.S. were simulated for three summer months (June, July and August) in 2007 using the U.S. EPA's Community Multiscale Air Quality model with the decoupled direct method 3D. The emissions inventory used in this study was the 2007 Mid-Atlantic Regional Air Management Association Level 2 inventory, developed for State Implementation Plan screening modeling for the Ozone Transport Commission region. The modeling results show that responses of peak ozone levels at specific locations to emissions from EGU (i.e., electric generating unit) and non-EGU sources could be different. Therefore, emissions from EGU and non-EGU sources should be considered as two different control categories when developing regional air pollution mitigation strategies. Based on the emission inventories used in this study, reductions in anthropogenic NOx emissions (including those from EGU and non-EGU sources) from the Great Lake region as well as northeastern and southeastern U.S. would be effective for decreasing area-mean peak ozone concentrations during the summer of 2007 in the Mid-Atlantic ozone air quality nonattainment areas. The results also show that reductions in anthropogenic VOC emissions from the northeastern U.S. would also be effective for decreasing area-mean peak ozone concentrations over the Mid-Atlantic U.S. In some cases, reductions in anthropogenic NOx emissions from the Great Lake and northeastern U.S. could slightly increase area-mean peak ozone concentrations at some ozone monitors in the Pittsburgh-Beaver Valley and Washington, DC areas. However, the disbenefit of the slight increase in ozone concentrations attributed to the NOx emission controls was far outweighed by the overall ozone air quality benefits over the Mid-Atlantic region.

A gravitational potential finding for rotating cosmological body in the context of proto-planetary dynamics problem solving

NASA Astrophysics Data System (ADS)

Krot, Alexander M.

2008-09-01

The statistical theory for a cosmological body forming (so-called the spheroidal body model) has been proposed in [1]-[9]. Within the framework of this theory, bodies have fuzzy outlines and are represented by means of spheroidal forms [1],[2]. In the work [3], it has been investigated a slowly evolving in time process of a gravitational compression of a spheroidal body close to an unstable equilibrium state. In the papers [4],[5], the equation of motion of particles inside the weakly gravitating spheroidal body modeled by means of an ideal liquid has been obtained. Using Schwarzschild's and Kerr's metrics a consistency of the proposed statistical model with the general relativity has been shown in [6]. The proposed theory follows from the conception for forming a spheroidal body from protoplanetary nebula [7],[8]; it permits to derive the form of distribution functions for an immovable [1]-[5] and rotating spheroidal body [6]-[8] as well as their density masses and also the distribution function of specific angular momentum of the rotating uniformly spheroidal body [7],[8]. It is well-known there is not a statistical equilibrium in a gas-dust proto-planetary cloud because of long relaxation time for proto-planets formation in own gravitational field. This proto-planetary system behavior can be described by Jeans' equation in partial derivations relative to a distribution function [9]. The problem for finding a general solution of Jeans' equation is connected directly with an analytical expression for potential of gravitational field. Thus, the determination of gravitational potential is the main problem of statistical dynamics for proto-planetary system [9]. This work shows this task of proto-planetary dynamics can be solved on the basis of spheroidal bodies theory. The proposed theory permits to derive the form of gravitational potential for a rotating spheroidal body at a long distance from its center. Using the obtained analytical expression for potential of gravitational field, the gravitational strength (as well as angular momentum space function) in a remote zone of a slowly gravitational compressed rotating spheroidal body is obtained. As a result, a distribution function describing mechanical state of proto-planetary system can be found from the Jeans' equation. References: [1] Krot AM. The statistical model of gravitational interaction of particles. Uspekhi Sovremennoï Radioelektroniki (special issue "Cosmic Radiophysics", Moscow) 1996; 8: 66-81 (in Russian). [2] Krot AM. Use of the statistical model of gravity for analysis of nonhomogeneity in earth surface. Proc. SPIE's 13th Annual Intern. Symposium "AeroSense", Orlando, Florida, USA, April 5-9, 1999; 3710: 1248-1259. [3] Krot AM. Statistical description of gravitational field: a new approach. Proc. SPIE's 14th Annual Intern.Symposium "AeroSense", Orlando, Florida, USA, April 24-28, 2000; 4038: 1318-1329. [4] Krot AM. Gravidynamical equations for a weakly gravitating spheroidal body. Proc. SPIE's 15th Annual Intern. Symposium "AeroSense", Orlando, Florida, USA, April 16-20, 2001; 4394: 1271-1282. [5] Krot AM. Development of gravidynamical equations for a weakly gravitating body in the vicinity of absolute zero temperature. Proc. 53rd Intern. Astronautical Congress (IAC) - The 2nd World Space Congress-2002, Houston, Texas, USA, October 10-19, 2002; Preprint IAC-02-J.P.01: 1-11. [6] Krot AM. The statistical model of rotating and gravitating spheroidal body with the point of view of general relativity. Proc. 35th COSPAR Scientific Assembly, Paris, France, July 18-25, 2004; Abstract-Nr. COSPAR 04-A- 00162. [7] Krot A. The statistical approach to exploring formation of Solar system. Proc. European Geoscinces Union (EGU) General Assembly, Vienna, Austria, April 02-07, 2006; Geophysical Research Abstracts, vol. 8: EGU06-A- 00216, SRef-ID: 1607-7962/gra/. [8] Krot AM. The statistical model of original and evolution planets of Solar system and planetary satellities. Proc. European Planetary Science Congress, Berlin, Germany, September 18-22, 2006; Planetary Research Abstracts, ESPC2006-A-00014. [9] Krot A. On the principal difficulties and ways to their solution in the theory of gravitational condensation of infinitely distributed dust substance. Proc. XXIV IUGG General Assembly, Perugia, Italy, July 2-13, 2007; GS002 Symposium "Gravity Field", Abstract GS002-3598: 143-144.

Geothermal prospection in the Greater Geneva Basin (Switzerland and France): Structural and reservoir quality assessment

NASA Astrophysics Data System (ADS)

Rusillon, Elme; Clerc, Nicolas; Makhloufi, Yasin; Brentini, Maud; Moscariello, Andrea

2017-04-01

A reservoir assessment was performed in the Greater Geneva Basin to evaluate the geothermal resources potential of low to medium enthalpy (Moscariello, 2016). For this purpose, a detail structural analysis of the basin was performed (Clerc et al., 2016) simultaneously with a reservoir appraisal study including petrophysical properties assessment in a consistent sedimentological and stratigraphical frame (Brentini et al., 2017). This multi-disciplinary study was organised in 4 steps: (1) investigation of the surrounding outcrops to understand the stratigraphy and lateral facies distribution of the sedimentary sequence from Permo-Carboniferous to Lower Cretaceous units; (2) development of 3D geological models derived from 2D seismic and well data focusing on the structural scheme of the basin to constrain better the tectonic influence on facies distribution and to assess potential hydraulic connectivity through faults between reservoir units ; (3) evaluation of the distribution, geometry, sedimentology and petrophysical properties of potential reservoir units from well data; (4) identification and selection of the most promising reservoir units for in-depth rock type characterization and 3D modeling. Petrophysical investigations revealed that the Kimmeridgian-Tithonian Reef Complex and the underlying Calcaires de Tabalcon units are the most promising geothermal reservoir targets (porosity range 10-20%; permeability to 1mD). Best reservoir properties are measured in patch reefs and high-energy peri-reefal depositional environments, which are surrounded by synchronous tight lagoonal deposits. Associated highly porous dolomitized intervals reported in the western part of the basin also provide enhanced reservoir quality. The distribution and geometry of best reservoir bodies is complex and constrained by (1) palaeotopography, which can be affected by synsedimentary fault activity during Mesozoic times, (2) sedimentary factors such as hydrodynamics, sea level variations, or sedimentation rates and (3) diagenetic history (Makhloufi et al., 2017). A detail structural characterization of the basin using 2D seismic data reveals the existence of several wrench fault zones and intra-basinal thrusts across the basin, which could act as hydraulic conduits and play a key role in connecting the most productive reservoir facies. To understand the propagation of these heterogeneous reservoirs, rock types are currently defined and will be integrated into 3D geological models. This integrated study allows us to understand better the distribution and properties of productive reservoir facies as well as hydraulic connectivity zones within the study area. This provides consistent knowledge for future geothermal exploration steps toward the successful development of this sustainable energy resource in the Greater Geneva Basin. Brentini et al. 2017 : Geothermal prospection in the Greater Geneva Basin: integration of geological data in the new Information System. Abstract, EGU General Assembly 2017, Vienna, Austria Clerc et al. 2016 : Structural Modeling of the Geneva Basin for Geothermal Ressource Assessment. Abstract, 14th Swiss Geoscience Meeting, Geneva, Switzerland Makhloufi et al. 2017 : Geothermal prospection in the Greater Geneva Basin (Switzerland and France) : impact of diagenesis on reservoir properties of the Upper Jurassic carbonate sediments. Abstract, EGU General Assembly 2017, Vienna, Austria Moscariello, A. 2016 : Geothermal exploration in SW Switzerland, Proceeding , European Geotermal Congress 2016, Strasbourg, France

Advances of FishNet towards a fully automatic monitoring system for fish migration

NASA Astrophysics Data System (ADS)

Kratzert, Frederik; Mader, Helmut

2017-04-01

Restoring the continuum of river networks, affected by anthropogenic constructions, is one of the main objectives of the Water Framework Directive. Regarding fish migration, fish passes are a widely used measure. Often the functionality of these fish passes needs to be assessed by monitoring. Over the last years, we developed a new semi-automatic monitoring system (FishCam) which allows the contact free observation of fish migration in fish passes through videos. The system consists of a detection tunnel, equipped with a camera, a motion sensor and artificial light sources, as well as a software (FishNet), which helps to analyze the video data. In its latest version, the software is capable of detecting and tracking objects in the videos as well as classifying them into "fish" and "no-fish" objects. This allows filtering out the videos containing at least one fish (approx. 5 % of all grabbed videos) and reduces the manual labor to the analysis of these videos. In this state the entire system has already been used in over 20 different fish passes across Austria for a total of over 140 months of monitoring resulting in more than 1.4 million analyzed videos. As a next step towards a fully automatic monitoring system, a key feature is the automatized classification of the detected fish into their species, which is still an unsolved task in a fully automatic monitoring environment. Recent advances in the field of machine learning, especially image classification with deep convolutional neural networks, sound promising in order to solve this problem. In this study, different approaches for the fish species classification are tested. Besides an image-only based classification approach using deep convolutional neural networks, various methods that combine the power of convolutional neural networks as image descriptors with additional features, such as the fish length and the time of appearance, are explored. To facilitate the development and testing phase of this approach, a subset of six fish species of Austrian rivers and streams is considered in this study. All scripts and the data to reproduce the results of this study will be made publicly available on GitHub* at the beginning of the EGU2017 General Assembly. * https://github.com/kratzert/EGU2017_public/

Seismic tomography of Basse-Terre volcanic island, Guadeloupe, Lesser Antilles, using earthquake travel times and noise correlations

NASA Astrophysics Data System (ADS)

Barnoud, Anne; Coutant, Olivier; Bouligand, Claire; Massin, Frédérick; Stehly, Laurent

2015-04-01

We image the volcanic island of Basse-Terre, Guadeloupe, Lesser Antilles, using both earthquake travel times and noise correlations. (1) A new earthquake catalog was recently compiled for the Lesser Antilles by the CDSA/OVSG/IPGP (Massin et al., EGU General Assembly 2014) and allows us to perform classical travel time tomography to obtain smooth 3D body wave velocity models. The geometrical configuration of the volcanic arc controls the resolution of the model in our zone of interest. (2) Surface wave tomography using noise correlations was successfully applied to volcanoes (Brenguier et al., Geophys. Res. Lett. 2007). We use seismic noise recorded at 16 broad-band stations and 9 short-period stations from Basse-Terre over a period of six years (2007-2012). For each station pair, we extract a dispersion curve from the noise correlation to get surface wave velocity models. The inversion of the dispersion curves produces a 3D S-wave velocity model of the island. The spatial distribution of seismic stations accross the island is highly heterogeneous, leading to higher resolution near the dome of the Soufrière of Guadeloupe volcano. Resulting velocity models are compared with densities obtained by 3D inversion of gravimetric data (Barnoud et al., AGU Fall Meeting 2013). Further work should include simultaneous inversion of seismic and gravimetric datasets to overcome resolution limitations.

Pre-eruptive volatile and erupted gas phase characterization of the 2014 basalt of Bárðarbunga volcanic system, Iceland.

NASA Astrophysics Data System (ADS)

Haddadi, Baptiste; Moune, Séverine; Sigmarsson, Olgeir; Gauthier, Pierre-Jean; Gouhier, Mathieu

2015-04-01

The 2014 Holuhraun eruption on the Bárðarbunga Volcanic System is the largest fissure eruption in Iceland since the 1783 Laki eruption. The eruption started end of August 2014 and has been characterized by large emission of SO2 into the atmosphere. It provides a rare opportunity to study in details magmatic and degassing processes during a large-volume fissure eruption. In order to characterize the pre-eruptive magmatic composition and to assess the plume chemistry at the eruption site, lava and tephra were sampled together with the eruption plume. The basalt composition is olivine tholeiite with MgO close to 7 wt%. It is phenocryst-poor with plagioclase as the dominant mineral phase but olivine and clinopyroxene are also present together with sulphide globules composed principally of pyrite and chalcopyrite. The volatile (S, Cl and F) and major element concentrations were measured by the electron microprobe in melt inclusions (MIs) trapped in plagioclase and clinopyroxene and groundmass glass. The MIs composition ranges from fairly primitive basaltic compositions (MgO: 9.03 wt%) down to evolved qz-tholeiites (MgO: 5.57 wt%), with estimated pre-eruptive S concentrations of 1500 ppm. Tephra groundmass glass contains 400 ppm S, whereas Cl and F concentrations are respectively slightly lower and indistinguishable from those in the MIs. This implies limited exsolution of halogens but 75% of the initial sulphur content. Relatively to their total iron content, MIs are sulphur saturated, and their oxygen fugacity close to the FMQ buffer. The difference between the estimated initial volatile concentrations measured in the MIs and in the tephra groundmass (i.e. the so-called petrological method) yields 7.2 Mt SO2, limited HCl and no HF atmospheric mass loading from the Holuhraun 2014 eruption. The SO2/HCl molar ratio of the gas phase, calculated from the MIs, is 13 and 14, respectively, using average and estimated pre-eruptive S and Cl concentrations in the MIs. Filter-pack sampling of the gas plume was performed 2 October 2014 few hundred meters to the W of the active crater row. Filter packs were composed of three filters in series: one PTFE filter to collect particulate phases, followed by two impregnated filters to trap major gaseous species (SO2, HF and HCl). Sulphate (SO4) and halide (Cl- and F-) ion concentrations were determined by ion chromatography. The SO2/HCl molar ratio in the erupted gas phase at the eruption site is 29-46, only slightly higher than that estimated from the MIs. Trace element volatility and fluxes are discussed elsewhere (Gauthier et al., 2015) but the average SO2 flux calculated from lava volume estimate end of November as 1.2 km3 (Gouhier et al., 2015) is close to 1100 kg/sec. This is the highest SO2 flux ever estimated from gas plume measurements. References: Gauthier et al. (2015) Trace element degassing patterns and volcanic fluxes to the atmosphere during the 2014 Holuhraun eruption, Iceland. EGU General Assembly 2015. Gouhier et al. (2015) Retrieval of lava and SO2 long-lived emissions using MSG-SEVIRI data during the 2014 Holuhraun eruption. EGU General Assembly 2015.

First evidence of the Ellesmerian metamorphism on Svalbard

NASA Astrophysics Data System (ADS)

Kośmińska, Karolina; Majka, Jarosław; Manecki, Maciej; Schneider, David A.

2016-04-01

The Ellesmerian fold-and-thrust belt is exposed in the High Arctic from Ellesmere Island in the east, through North Greenland, to Svalbard in the west (e.g. Piepjohn et al., 2015). It developed during Late Devonian - Early Carboniferous, and overprinted older (mainly Caledonian) structures. It is thought that this fold-and-thrust belt was formed due to collision of the Pearya Terrane and Svalbard with the Franklinian Basin of Laurentia. Traditionally, the Ellesmerian fold-and-thrust belt comprises a passive continental margin affected by foreland deformation processes, but the exact larger scale tectonic context of this belt is disputable. It is partly because the Eocene Eurekan deformation superimposed significantly the Ellesmerian structures, thus making the reconstruction of the pre-Eurekan history very difficult. Here we present for the first time evidence for Ellesmerian metamorphism within the crystalline basement of Svalbard. These rocks are exposed in the Pinkie unit on Prins Karls Forland (W-Svalbard), which exhibits tectonic contacts with the overlying sequences. The Pinkie unit is mainly composed of strongly deformed lithologies such as laminated quartzites, siliciclastic rocks and garnet-bearing mica schists. Detrital zircon dating yielded ages as young as Neoproterozoic (0.95-1.05 Ga), thus the Pinkie unit is considered to be Neoproterozoic (Kośmińska et al., 2015a). The M1 assemblages and D1 structures are affected by D2 mylonitization (cf. Faehnrich et al., 2016, this meeting). Petrological characterization and Th-U-total Pb chemical monazite dating have been performed on the Pinkie metapelites. These rocks exhibit an apparent inverted Barrovian metamorphic sequence, within which three metamorphic zones have been distinguished: garnet+staurolite+muscovite+biotite, garnet+staurolite+kyanite+muscovite+biotite, garnet+kyanite+muscovite+biotite. The P-T estimates using the QuiG barometry coupled with thermodynamic modelling revealed that the metapelites were formed under amphibolite facies conditions at c. 7-9 kbar and 550-650 °C (Kośmińska et al., 2015b). Monazite dating was performed on samples from these three metamorphic zones. The chemical zonation of monazite allows the identification of several monazite populations, which likely developed during different stages of Barrovian metamorphism. The geochronology demonstrate protracted monazite growth from the early prograde stage at c. 370 Ma to the peak conditions at c. 355 Ma. Thus it is evident that the Ellesmerian event was not limited to the relatively cold deformation as previously thought. The amphibolite facies metamorphism of c. 370-355 Ma that was documented in our study sheds new light on understanding of the character of this tectonothermal event. This project is financed by NCN research project No 2013/11/N/ST10/00357 and partially funded by AGH research grant no 11.11.140.319. References: Faehnrich et al., 2016. A tectonic window into the crystalline basement of Prins Karls Forland, Spitsbergen. EGU General Assembly 2016. Kośmińska et al., 2015b. Metamorphic evolution of the Pinkie unit metapelites from Svalbard (High Arctic): P-T-t study including Quartz-in-garnet barometry (QuiG). GSA 2015: Annual Meeting, Baltimore. Kośmińska et al., 2015a. Detrital zircon U-Pb geochronology of metasediments from southwestern Svalbard's Caledonian Province. EGU General Assembly 2015. Piepjohn et al., 2015. Tectonic map of the Ellesmerian and Eurekan deformation belts on Svalbard, North Greenland, and the Queen Elizabeth Islands (Canadian Arctic). Arktos, DOI 10.1007/s41063-015-0015-7.

Characterize the hydraulic behaviour of grate inlet in urban drainage to prevent the urban's flooding

NASA Astrophysics Data System (ADS)

Tellez Alvarez, Jackson David; Gomez, Manuel; Russo, Beniamino; Redondo, Jose M.

2016-04-01

One of the most important problems that have some cities is the urban floods because of poor drainage design. Therefore the systems the drainage do not have the capacity of capture the flow of discharge generated in a rain event and insert it into the drainage network. Even though the two problems that have caught the main attention are the evaluation of the volumes falling in the river basin because extreme rainfall events often lead to urban pluvial flooding being a hydrologic problem and the hydraulic design of the sewer network being a hydraulic problem to limiting capacity of the drainage system, there is an intermediate step between these two processes that is necessary to solve that is the hydraulic behavior of the grate inlet. We need to collect the runoff produced on the city surface and to introduce it in the sewer network. Normally foundry companies provide complete information about drainage grate structural capacity but provide nothing about their hydraulic capacity. This fact can be seen because at the moment does not exist any official regulation at national or international level in this field. It's obvious that, nowadays, there is a great gap in this field at the legislative level owing to the complexity of this field and the modernity of the urban hydrology as science [1]. In essence, we shows the relevance to know the inlet hydraulic interception capacity because surface drainage requires a satisfactory knowledge on storm frequency, gutter flow and above all inlet capacity. In addition, we development an important achievement is the invention and development of techniques for measurement of field velocities in hydraulics engineering applications. Hence knowledge the technological advances in digital cameras with high resolution and high speed found in the environmental, and the advances in image processing techniques, therefore now is a tremendous potential to obtain of behavior of the water surface flow [2]. A novel technique using particle image velocimetry to measure surface flow velocities has been developed and validated with the experiments assays with the grate inlets [3 - 4]. Indeed, the Methodology carried out can become a useful tools to understand the hydraulics behavior of the flow approaching the inlet where the traditional measuring equipment have serious problems and limitations [5 - 6]. References [1] Gómez, M., Macchione, F. and Russo, B. (2006). Inlet systems and risk criteria associated to street runoff application to urban drainage catchments. 27 Corso di aggiornamiento in techniche per la difesa dall'inquinamento. [2] Russo, B., Gómez, M., & Tellez, J. (2013). Methodology to Estimate the Hydraulic Efficiency of Nontested Continuous Transverse Grates. Journal of Irrigation and Drainage Engineering, 139(10), 864-871. doi:10.1061/(ASCE)IR.1943-4774.0000625 [3] DigiFlow. User Guide. (2012), (June). [4] Vila, T., Tellez, J., Sanchez, J.M., Sotillos, L., Diez, M., and Redondo, J.M. (2014). Diffusion in fractal wakes and convective thermoelectric flows. Geophysical Research Abstracts - EGU General Assembly 2014. [5] Tellez, J., Gómez, M., Russo, B. and Redondo, J.M. (2014). A simple technique to measuring surface flow velocity to analyze the behavior of fields velocities in hydraulics engineer applications. Geophysical Research Abstracts - EGU General Assembly 2015. [6] Tellez, J., Gómez, M. and Russo, B. (2015). Técnica para la obtención del campo de velocidad del flujo superficial en proximidad de rejas de alcantarillado. IV Jornadas de Ingeniería del Agua. La precipitación y los procesos erosivos.

Pleistocene alterations of drainage network between the Alps and the Pannonian Basin

NASA Astrophysics Data System (ADS)

Kovács, G.

2012-04-01

The investigated study area is situated in the transition zone between the still uplifting Eastern Alps and the subsiding Little Hungarian Plain (Joó 1992), bordered by Lafnitz (Lapincs), Répce (Rabnitz) and Rába (Raab) rivers. The contrasting forcing of the regions of differential uplift created a distinctive surface morphology of typically low relief that has a characteristic drainage network pattern as well. Our study is aimed at the reconstruction of the surface evolution by separation of individual geomorphic domains delineated by their geomorphometric characteristics. The hilly area is mostly covered by Miocene sediments. The mesoscale geomorphological units of the study area are influenced by the uplifting metamorphic core complex of Koszeg-Rechnitz Mountains (Tari - Horváth 1995), by the also metamorphic and relatively uplifting Vas Hill as well as by the subsiding grabens. There are two dominant flow directions alternating downstream. Valley segments are often bordered by steep scarps, which were identified by previous research as listric normal faults and grabens. Largely, the investigated area consists of tilted blocks bordered by 30-60 m high and steep, fault-related escarpments as it was demonstrated by the analysis of lignite layers, topographic sections and topographic swath analyses (Kovács et al. 2010, Kovács et al. 2011). Drainage network reorganizations occurred in several steps during the Pleistocene. Corresponding landforms are abrupt changes in stream direction, wind gaps, uplifted terrace levels built up of sedimentary rocks and wide alluvial valleys. Terraces are best developed along the Strem stream, which has a strikingly small drainage area at present, due to the Pinka River, which captured the upper parts of the drainage basin. The widest valley belongs to Pinka River. Drainage reorganizations are most likely due to the uplifting scarps that diverted the streams. Remainders of previous cross-valleys are wind gaps. Using these markers (wide alluvial valleys with relatively small streams, terrace levels and wind gaps) and the different height of the scarps we roughly elaborated the geomorphological development of the area, including relative age of drainage network elements, tectonic features and river captures. Results indicate a detailed but still regionally dissected timeline about drainage network alterations, including phases of gravel sedimentation, incision and beheadings. The abstract titled "Pleistocene alteration of drainage network and surface morphology caused by basement structure in the foreland of Eastern Alps" determine the origin of the investigated scarps. This paper was supported by Hungarian Scientific Research Fund (OTKA NK83400). Joó, I. (1992): Recent vertical surface movements in the Carpathian Basin. Tectonophysics 202: 129-134. Kovács, G., Telbisz, T., Székely, B. (2010) Faulted and eroded gravel deposit in western Hungary. - Geophysical Research Abstracts Vol. 12. EGU General Assembly 2010. Kovács, G., Telbisz, T., Székely, B. (2011) Quaternary alterations of drainage network in a transition area between the Alps and the Pannonian Basin. - Geophysical Research Abstracts Vol. 13. EGU General Assembly 2011. Tari, G. and Horváth, F. (1995): Middle Miocene extensional collapse in the Alpine-Pannonian transitional zone, in: Horváth, F., Tari, G., and Bokor, K. (Eds.): Extensional collapse of the Alpine orogene and hydrocarbon prospects in the basement and fill of the western Pannonian Basin, AAPG Inter. Conf. and Exhib., Nice, France, Guidebook to fieldtrip No. 6, 75-105

Modelling global change impacts on soil carbon contents of agro-silvo-pastoral Mediterranean systems

NASA Astrophysics Data System (ADS)

Lozano-García, Beatriz; Muñoz-Rojas, Miriam; Parras-Alcántara, Luis

2016-04-01

To assess the impact of climate change on soil organic C (SOC) stocks in agro-silvo-pastoral environments, different models have been applied worldwide at local or regional scales, such as as RothC (Francaviglia et al., 2012) or CENTURY (Alvaro-Fuentes et al., 2012). However, some of these models may require a high number of input parameters or can underestimate the effect of soil depth. CarboSOIL (Muñoz-Rojas et al., 2013) is an empirical model based on regression techniques and developed to predict SOC contents at standard soil depths (0-25, 25-50 and 50-75 cm) under a range of climate and/or land use change scenarios. CarboSOIL has been successfully applied in different Mediterranean areas ,e.g. Southern Spain (Muñoz-Rojas et al., 2013; Abd-Elmabod et al., 2014), Northern Egypt (Muñoz-Rojas et al., 2014) and Italy (Muñoz-Rojas et al., 2015). In this study, CarboSOIL was applied in the Cardeña and Montoro mountain range Natural Park. This area covers 385 km2 and is located within Sierra Morena (Córdoba, South Spain) and has a semiarid Mediterranean climate. It is characterized by agro-silvo-pastoral systems. The Mediterranean evergreen oak woodland (MEOW-dehesa) is savanna-like open woodland ecosystem characterized by silvopastoral uses, being an ancient human modified Mediterranean landscape (Corral-Fernández et al., 2013; Lozano-García and Parras-Alcántara 2013). The most representative soils in the Cardeña and Montoro mountain range Natural Park are Cambisols, Regosols, Leptosols and Fluvisols. These soils are characterized by low fertility, poor physical conditions and marginal capacity for agricultural use, together with low organic matter (OM) content due to climate conditions (semiarid Mediterranean climate) and soil texture (sandy). The model was applied at different soil depths: 0-25, 25-50 and 50-75 cm (Parras-Alcántara et al., 2015) considering land use and climate changes scenarios based on available global climate models (IPPC, 2007). A total of 38 sampling points were selected under two management practices and six different land uses: (1) MEOW-dehesa (D); (2) MEOW-dehesa + some pine trees (D+P); (3) MEOW-dehesa + some cork oaks (D+C); (4) MEOW-dehesa + some gall oaks (D + G); (5) MEOW-dehesa after a clarified process and transformed to olive grove but maintaining isolated oaks (OG) and (6) MEOW-dehesa after a clarified process and transformed to cereal pasture with isolated oaks (C). Preliminary results showed a high heterogeneity of SOC contents along the soil profile for different climate and land use scenarios. The methods used here can be easily implemented in other Mediterranean areas with available information on climate, site, soil and land use. Keywords: CarboSOIL model, land use change, climate change, soil depth, dehesa References: Abd-Elmabod, S.K., Muñoz-Rojas, M., Jordán, A., Anaya-Romero, M., De la Rosa, D., 2014. Modelling soil organic carbon stocks along topographic transects under climate change scenarios using CarboSOIL. Geophys. Res. Abstr. vol. 16 EGU2014-295-1, EGU General Assembly.) Álvaro-Fuentes, J., Easter, M., Paustian, K., 2012. Climate change effects on organic carbon storage in agricultural soils of northeastern Spain. Agric. Ecosyst. Environ. 155, 87-94. Corral-Fernández, R., Parras-Alcántara, L., Lozano-García, B. 2013. Stratification ratio of soil organic C, N and C:N in Mediterranean evergreen oak woodland with conventional and organic tillage. Agric. Ecosyst. Environ. 164, 252-259. Francaviglia, R., Coleman, K., Whitmore, A.P., Doro, L., Urracci, G., Rubino, M., Ledda, L., 2012. Changes in soil organic carbon and climate change - application of the RothC model in agrosilvo-pastoral Mediterranean systems. Agric. Syst. 112, 48- 54. IPCC, 2007. Technical summary. In: Climate Change 2007. Contribution of Working Group III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change http://www.ipcc.ch/. Lozano-García, B., Parras-Alcántara, L. 2013. Land use and management effects on carbon and nitrogen in Mediterranean Cambisols. Agric. Ecosyst. Environ. 179, 208- 214. Muñoz-Rojas, M., Jordán, A., Zavala, L.M., González-Peñaloza, F.A., De la Rosa, D., Pino-Mejias, R., Anaya-Romero, M., 2013. Modelling soil organic carbon stocks in global change scenarios: a CarboSOIL application. Biogeosciences 10, 8253-8268. Muñoz-Rojas, M., Abd-Elmabod, S.K., Jordán, A., Zavala, L.M., Anaya-Romero, M., De la Rosa, D., 2014. Potential soil organic carbon stocks in semi arid areas under climate change scenarios: an application of CarboSOIL model in northern Egypt. Geophysical Research Abstracts Vol. 16 EGU2014-638-3, EGU General Assembly. Muñoz-Rojas, M., Doro, L., Ledda, L. and Francaviglia, R. 2015. Application of CarboSOIL model to predict the effects of climate change on soil organic carbon stocks in agro-silvo-pastoral Mediterranean management. Agriculture, ecosystems and environment 202, 8-16. Parras-Alcántara, L., Lozano-García, B., Brevik, E.C., Cerdá, A. 2015. Soil organic carbon stocks assessment in Mediterranean natural areas: A comparison of entire soil profiles and soil control sections. Journal of Environmental Management 15, 155-215.

Geothermal prospection in the Greater Geneva Basin (Switzerland and France): Integration of geological data in the new Information System

NASA Astrophysics Data System (ADS)

Brentini, Maud; Favre, Stéphanie; Rusillon, Elme; Moscariello, Andrea

2017-04-01

Piloted by the State of Geneva and implemented by the SIG (Services Industriels de Genève), the GEothermie2020 program aims to develop geothermal energy resources in the Greater Geneva Basin (GGB) (Moscariello A., 2016). Since 2014, many existing data have been examined (Rusillon et al., 2017, Clerc et al., 2016) and new ones have been collected. Nevertheless, to date the actual IT infrastructure of the State of Geneva is neither designed to centralize these data, nor to respond efficiently to operational demands. In this context, we are developing a new Information System adapted to this specific situation (Favre et al., 2017). In order to establish a solid base line for future exploration and exploitation of underground natural resources, the centralization of the geological surface/subsurface knowledge is the real challenge. Finding the balance between comprehensiveness and relevance of the data to integrate into this future complete database system is key. Geological data are numerous, of various nature, and often very heterogeneous. Incorporating and relating all individual data is therefore a difficult and challenging task. As a result, a large work has to be done on the understanding and the harmonization of the stratigraphy of the Geneva Basin, to appreciate the data and spatial geological heterogneity. The first step consisted in consulting all data from MSc and PhD work of the University of Geneva (about 50) and from literature concerning the regional geology. In parallel, an overview concerning the subsurface geological data management in Europe carried out to learn from the experience of other geological surveys. Heterogeneities and discrepancies of the data are the main issue. Over several years (since late 30s) individual authors collected different type of data and made different interpretations leading a variety of stratigraphic facies definitions, associations and environmental reconstructions. Cross checking these data with national programs, such as HARMOS (official Swiss stratigraphic framework; Morard, 2014, Strasser et al., 2016) is essential to evaluate this type of harmonization system. The current work is establishing composite logs and a stratigraphic catalog where clear stratigraphic framework for the GGB is defined. This will provide a better understanding of the subsurface and a general framework for the new State database. The GEothermie 2020 Program has raised the importance of harmonizing and correlating data in order to understand better the GGB subsurface geology. The future database will be based on a clear and accurate geological and stratigraphic framework where relevant data will be integrated. It will offer a valuable tool to the State of Geneva and external users to find data easily, generate correlations, subsurface models and extract information with specific inquiries. The development of this intelligent and interactive data management system is pivotal to offer an easier and smart management of subsurface resources to the State. REFERENCES Clerc, N., Rusillon, E., Cardello, L., Moscariello, A. and Renard, P., 2016. Structural Modeling of the Geneva Basin for Geothermal Ressource Assessment. Abstract, 14th Swiss Geoscience Meeting, Geneva, Switzerland. Favre, S., Brentini, M., Giuliani, G. and Lehmann, A., 2017. Geothermal prospection in the Greater Geneva Basin (Switzerland and France): Architecture of the new Information System. Abstract, EGU General Assembly 2017, Vienna, Austria. Morard, A., 2014. Correlations beyond HARMOS: how, where, why? Swiss Geoscience Meeting 2014. Platform Geosciences, Swiss Academy of Science, SCNAT. Conference paper. Moscariello A. 2016: Geothermal exploration in SW Switzerland, Proceeding of the European Geotermal Congress, Strasbourg 19-23 september 2016, 9 pp. Rusillon, E., Clerc, N., Makhloufi, Y., Brentini and M., Moscariello, A., 2017. Geothermal prospection in the Greater Geneva Basin (Switzerland and France): Structural and reservoir quality assessment. Abstract, EGU General Assembly 2017, Vienna, Austria. Strasser, A., Charollais, J., Conrad, M. A., Clavel, B., Pictet, A. and Mastrangelo, B., 2016. The Cretaceous of the Swiss Jura Mountains : an improved lithostratigraphic scheme. Swiss Journal of Geosciences, 1-20.

Sharing environmental models: An Approach using GitHub repositories and Web Processing Services

NASA Astrophysics Data System (ADS)

Stasch, Christoph; Nuest, Daniel; Pross, Benjamin

2016-04-01

The GLUES (Global Assessment of Land Use Dynamics, Greenhouse Gas Emissions and Ecosystem Services) project established a spatial data infrastructure for scientific geospatial data and metadata (http://geoportal-glues.ufz.de), where different regional collaborative projects researching the impacts of climate and socio-economic changes on sustainable land management can share their underlying base scenarios and datasets. One goal of the project is to ease the sharing of computational models between institutions and to make them easily executable in Web-based infrastructures. In this work, we present such an approach for sharing computational models relying on GitHub repositories (http://github.com) and Web Processing Services. At first, model providers upload their model implementations to GitHub repositories in order to share them with others. The GitHub platform allows users to submit changes to the model code. The changes can be discussed and reviewed before merging them. However, while GitHub allows sharing and collaborating of model source code, it does not actually allow running these models, which requires efforts to transfer the implementation to a model execution framework. We thus have extended an existing implementation of the OGC Web Processing Service standard (http://www.opengeospatial.org/standards/wps), the 52°North Web Processing Service (http://52north.org/wps) platform to retrieve all model implementations from a git (http://git-scm.com) repository and add them to the collection of published geoprocesses. The current implementation is restricted to models implemented as R scripts using WPS4R annotations (Hinz et al.) and to Java algorithms using the 52°North WPS Java API. The models hence become executable through a standardized Web API by multiple clients such as desktop or browser GIS and modelling frameworks. If the model code is changed on the GitHub platform, the changes are retrieved by the service and the processes will be updated accordingly. The admin tool of the 52°North WPS was extended to support automated retrieval and deployment of computational models from GitHub repositories. Once the R code is available in the GitHub repo, the contained process can be easily deployed and executed by simply defining the GitHub repository URL in the WPS admin tool. We illustrate the usage of the approach by sharing and running a model for land use system archetypes developed by the Helmholtz Centre for Environmental Research (UFZ, see Vaclavik et al.). The original R code was extended and published in the 52°North WPS using both, public and non-public datasets (Nüst et al., see also https://github.com/52North/glues-wps). Hosting the analysis in a Git repository now allows WPS administrators, client developers, and modelers to easily work together on new versions or completely new web processes using the powerful GitHub collaboration platform. References: Hinz, M. et. al. (2013): Spatial Statistics on the Geospatial Web. In: The 16th AGILE International Conference on Geographic Information Science, Short Papers. http://www.agile-online.org/Conference_Paper/CDs/agile_2013/Short_Papers/SP_S3.1_Hinz.pdf Nüst, D. et. al.: (2015): Open and reproducible global land use classification. In: EGU General Assembly Conference Abstracts . Vol. 17. European Geophysical Union, 2015, p. 9125, http://meetingorganizer.copernicus. org/EGU2015/EGU2015- 9125.pdf Vaclavik, T., et. al. (2013): Mapping global land system archetypes. Global Environmental Change 23(6): 1637-1647. Online available: October 9, 2013, DOI: 10.1016/j.gloenvcha.2013.09.004

How to pose the question matters: Behavioural Economics concepts in decision making on the basis of ensemble forecasts

NASA Astrophysics Data System (ADS)

Alfonso, Leonardo; van Andel, Schalk Jan

2014-05-01

Part of recent research in ensemble and probabilistic hydro-meteorological forecasting analyses which probabilistic information is required by decision makers and how it can be most effectively visualised. This work, in addition, analyses if decision making in flood early warning is also influenced by the way the decision question is posed. For this purpose, the decision-making game "Do probabilistic forecasts lead to better decisions?", which Ramos et al (2012) conducted at the EGU General Assembly 2012 in the city of Vienna, has been repeated with a small group and expanded. In that game decision makers had to decide whether or not to open a flood release gate, on the basis of flood forecasts, with and without uncertainty information. A conclusion of that game was that, in the absence of uncertainty information, decision makers are compelled towards a more risk-averse attitude. In order to explore to what extent the answers were driven by the way the questions were framed, in addition to the original experiment, a second variant was introduced where participants were asked to choose between a sure value (for either loosing or winning with a giving probability) and a gamble. This set-up is based on Kahneman and Tversky (1979). Results indicate that the way how the questions are posed may play an important role in decision making and that Prospect Theory provides promising concepts to further understand how this works.

Multiscaling properties of tropical rainfall: Analysis of rain gauge datasets in Lesser Antilles island environment

NASA Astrophysics Data System (ADS)

Bernard, Didier C.; Pasquier, Raphaël; Cécé, Raphaël; Dorville, Jean-François

2014-05-01

Changes in rainfall seem to be the main impact of climate change in the Caribbean area. The last conclusions of IPCC (2013), indicate that the end of this century will be marked by a rise of extreme rainfalls in tropical areas, linked with increase of the mean surface temperature. Moreover, most of the Lesser Antilles islands are characterized by a complex topography which tends to enhance the rainfall from synoptic disturbances by orographic effects. In the past five years, out of hurricanes passage, several extreme rainy events (approx. 16 mm in 6 minutes), including fatal cases, occurred in the Lesser Antilles Arc: in Guadeloupe (January 2011, May 2012 and 2013), in Martinique (May 2009, April 2011 and 2013), in Saint-Lucia (December 2013). These phenomena inducing floods, loss of life and material damages (agriculture sector and public infrastructures), inhibit the development of the islands. At this time, numerical weather prediction models as WRF, which are based on the equations of the atmospheric physics, do not show great results in the focused area (Bernard et al., 2013). Statistical methods may be used to examine explicitly local rainy updrafts, thermally and orographically induced at micro-scale. The main goal of the present insular tropical study is to characterize the multifractal symmetries occurring in the 6-min rainfall time series, registered since 2006 by the French Met. Office network weather stations. The universal multifractal model (Schertzer and Lovejoy, 1991) is used to define the statistical properties of measured rainfalls at meso-scale and micro-scale. This model is parametrized by a fundamental exponents set (H,a,C1,q) which are determined and compared with values found in the literature. The first three parameters characterize the mean pattern and the last parameter q, the extreme pattern. The occurrence ranges of multifractal regime are examined. The suggested links between the internal variability of the tropical rainy events and the multifractal properties found, are preliminary discussed. References Bernard, D., R. Cécé and J.-F. Dorville (2013). High resolution numerical simulation (WRF V3) of an extrem rainy event over the Guadeloupe archipelago: Case of 3-5 January 2011. EGU General Assembly 2013, Geophysical Research Abstracts, Vol. 15, EGU2013-9988, Vienna, April 2013. Schertzer, D., S. Lovejoy (1991). Nonlinear geodynamical variability: Multiple singularities, universality and observables. Scaling, fractals and non-linear variability in geophysics, D. Schertzer, S. Lovejoy eds.,41-82, Kluwer.

Detection and characterization of cultural noise sources in magnetotelluric data: individual and joint analysis of the polarization attributes of the electric and magnetic field time-series in the time-frequency domain

NASA Astrophysics Data System (ADS)

Escalas, M.; Queralt, P.; Ledo, J.; Marcuello, A.

2012-04-01

Magnetotelluric (MT) method is a passive electromagnetic technique, which is currently used to characterize sites for the geological storage of CO2. These later ones are usually located nearby industrialized, urban or farming areas, where man-made electromagnetic (EM) signals contaminate the MT data. The identification and characterization of the artificial EM sources which generate the so-called "cultural noise" is an important challenge to obtain the most reliable results with the MT method. The polarization attributes of an EM signal (tilt angle, ellipticity and phase difference between its orthogonal components) are related to the character of its source. In a previous work (Escalas et al. 2011), we proposed a method to distinguish natural signal from cultural noise in the raw MT data. It is based on the polarization analysis of the MT time-series in the time-frequency domain, using a wavelet scheme. We developed an algorithm to implement the method, and was tested with both synthetic and field data. In 2010, we carried out a controlled-source electromagnetic (CSEM) experiment in the Hontomín site (the Research Laboratory on Geological Storage of CO2 in Spain). MT time-series were contaminated at different frequencies with the signal emitted by a controlled artificial EM source: two electric dipoles (1 km long, arranged in North-South and East-West directions). The analysis with our algorithm of the electric field time-series acquired in this experiment was successful: the polarization attributes of both the natural and artificial signal were obtained in the time-frequency domain, highlighting their differences. The processing of the magnetic field time-series acquired in the Hontomín experiment has been done in the present work. This new analysis of the polarization attributes of the magnetic field data has provided additional information to detect the contribution of the artificial source in the measured data. Moreover, the joint analysis of the polarization attributes of the electric and magnetic field has been crucial to fully characterize the properties and the location of the noise source. Escalas, M., Queralt, P., Ledo, J., Marcuello, A., 2011. Identification of cultural noise sources in magnetotelluric data: estimating polarization attributes in the time-frequency domain using wavelet analysis. Geophysical Research Abstracts Vol. 13, EGU2011-6085. EGU General Assembly 2011.

An open science cloud for scientific research

NASA Astrophysics Data System (ADS)

Jones, Bob

2016-04-01

The Helix Nebula initiative was presented at EGU 2013 (http://meetingorganizer.copernicus.org/EGU2013/EGU2013-1510-2.pdf) and has continued to expand with more research organisations, providers and services. The hybrid cloud model deployed by Helix Nebula has grown to become a viable approach for provisioning ICT services for research communities from both public and commercial service providers (http://dx.doi.org/10.5281/zenodo.16001). The relevance of this approach for all those communities facing societal challenges in explained in a recent EIROforum publication (http://dx.doi.org/10.5281/zenodo.34264). This presentation will describe how this model brings together a range of stakeholders to implement a common platform for data intensive services that builds upon existing public funded e-infrastructures and commercial cloud services to promote open science. It explores the essential characteristics of a European Open Science Cloud if it is to address the big data needs of the latest generation of Research Infrastructures. The high-level architecture and key services as well as the role of standards is described. A governance and financial model together with the roles of the stakeholders, including commercial service providers and downstream business sectors, that will ensure a European Open Science Cloud can innovate, grow and be sustained beyond the current project cycles is described.

Estimating State-Specific Contributions to PM2.5- and O3-Related Health Burden from Residential Combustion and Electricity Generating Unit Emissions in the United States.

PubMed

Penn, Stefani L; Arunachalam, Saravanan; Woody, Matthew; Heiger-Bernays, Wendy; Tripodis, Yorghos; Levy, Jonathan I

2017-03-01

Residential combustion (RC) and electricity generating unit (EGU) emissions adversely impact air quality and human health by increasing ambient concentrations of fine particulate matter (PM 2.5 ) and ozone (O 3 ). Studies to date have not isolated contributing emissions by state of origin (source-state), which is necessary for policy makers to determine efficient strategies to decrease health impacts. In this study, we aimed to estimate health impacts (premature mortalities) attributable to PM 2.5 and O 3 from RC and EGU emissions by precursor species, source sector, and source-state in the continental United States for 2005. We used the Community Multiscale Air Quality model employing the decoupled direct method to quantify changes in air quality and epidemiological evidence to determine concentration-response functions to calculate associated health impacts. We estimated 21,000 premature mortalities per year from EGU emissions, driven by sulfur dioxide emissions forming PM 2.5 . More than half of EGU health impacts are attributable to emissions from eight states with significant coal combustion and large downwind populations. We estimate 10,000 premature mortalities per year from RC emissions, driven by primary PM 2.5 emissions. States with large populations and significant residential wood combustion dominate RC health impacts. Annual mortality risk per thousand tons of precursor emissions (health damage functions) varied significantly across source-states for both source sectors and all precursor pollutants. Our findings reinforce the importance of pollutant-specific, location-specific, and source-specific models of health impacts in design of health-risk minimizing emissions control policies. Citation: Penn SL, Arunachalam S, Woody M, Heiger-Bernays W, Tripodis Y, Levy JI. 2017. Estimating state-specific contributions to PM 2.5 - and O 3 -related health burden from residential combustion and electricity generating unit emissions in the United States. Environ Health Perspect 125:324-332; http://dx.doi.org/10.1289/EHP550.

COPDESS (Coalition for Publishing Data in the Earth & Space Sciences): An Update on Progress and Next Steps

NASA Astrophysics Data System (ADS)

Lehnert, Kerstin; Hanson, Brooks; Sallans, Andrew; Elger, Kirsten

2016-04-01

The Coalition for Publishing Data in the Earth and Space Sciences (http://www.copdess.org/) formed in October 2014 to provide an organizational framework for Earth and space science publishers and data facilities to jointly implement and promote common policies and procedures for the publication and citation of data across Earth Science journals. Since inception, it has worked to develop and promote adoption of data citation standards (e.g. FORCE11 Joint Declaration of Data Citation Principles), integrate community tools and services for greater discovery and adoption (e.g. COPDESS Directory of Repositories, https://copdessdirectory.osf.io/), and connect with related community efforts for greater transparency in research community (e.g. the Transparency and Openness Promotion Guidelines, http://cos.io/top). Following a second COPDESS workshop in Fall 2015, COPDESS is undertaking several concrete steps to increase participation and integration of efforts more deeply into the publishing and data facility workflows and to expand international participation. This talk will focus on details of specific initiatives, collection of feedback, and a call for new members. Specifically, we will present progress on the development of guidelines that aim to standardize publishers' recommended best practices by establishing "Best practices for best practices" that will allow a journal or data facility to tailor these practices to the sub-disciplines that they serve. COPDESS will further work to advance implementation of these best practices through increased outreach to and education of editors and authors. COPDESS plans to offer a Town Hall meeting at the EGU General Assembly as a forum for further information and discussion.

Human impact on the geomorphic evolution of the HOAL catchment, Lower Austria

NASA Astrophysics Data System (ADS)

Pöppl, Ronald; Kraushaar, Sabine; Strauss, Peter; Fuchs, Markus

2016-04-01

Since the beginning of human settlement extensive land cover and land use changes have induced significant geomorphic landscape changes as water and sediment dynamics have been transformed. The presented project focuses on the reconstruction of Holocene geomorphic landscape evolution and the assessment of recent geomorphic processes in the Northern foothills of the Eastern Alps in Austria - an area intensively agriculturally used since the middle ages and often overlooked in its geomorphic evolution. The study area is a small catchment (ca. 66 ha) which is located in the western part of Lower Austria comprising a land use history as well as environmental settings typical for wide regions across the Northern foothills of the Eastern Alps in Austria. The catchment elevation ranges from 268 to 323 m a.s.l. and has a mean slope angle of 8%. The climate in this region can be characterized as humid. The lithology mainly consists of Tertiary marly to sandy deposits which are superimposed by Quaternary sediments (e.g. loesses). Dominant soil types are Cambisols, Luvisols, and Planosols. Furthermore, the catchment is used as a Hydrological Open Air Laboratory (HOAL) implemented for the long-term research of water-related flow and transport processes in the landscape (http://hoal.hydrology.at). The main objective of this research project is to reconstruct Holocene landscape evolution by analyzing physical parameters of sediment cores taken from colluvial and alluvial sediment archives with additional 14C and OSL dating as well as by the measurement of truncated and covered standardized Luvisol profiles. First results will be presented at the EGU General Assembly 2016.

An interactive modelling tool for understanding hydrological processes in lowland catchments

NASA Astrophysics Data System (ADS)

Brauer, Claudia; Torfs, Paul; Uijlenhoet, Remko

2016-04-01

Recently, we developed the Wageningen Lowland Runoff Simulator (WALRUS), a rainfall-runoff model for catchments with shallow groundwater (Brauer et al., 2014ab). WALRUS explicitly simulates processes which are important in lowland catchments, such as feedbacks between saturated and unsaturated zone and between groundwater and surface water. WALRUS has a simple model structure and few parameters with physical connotations. Some default functions (which can be changed easily for research purposes) are implemented to facilitate application by practitioners and students. The effect of water management on hydrological variables can be simulated explicitly. The model description and applications are published in open access journals (Brauer et al, 2014). The open source code (provided as R package) and manual can be downloaded freely (www.github.com/ClaudiaBrauer/WALRUS). We organised a short course for Dutch water managers and consultants to become acquainted with WALRUS. We are now adapting this course as a stand-alone tutorial suitable for a varied, international audience. In addition, simple models can aid teachers to explain hydrological principles effectively. We used WALRUS to generate examples for simple interactive tools, which we will present at the EGU General Assembly. C.C. Brauer, A.J. Teuling, P.J.J.F. Torfs, R. Uijlenhoet (2014a): The Wageningen Lowland Runoff Simulator (WALRUS): a lumped rainfall-runoff model for catchments with shallow groundwater, Geosci. Model Dev., 7, 2313-2332. C.C. Brauer, P.J.J.F. Torfs, A.J. Teuling, R. Uijlenhoet (2014b): The Wageningen Lowland Runoff Simulator (WALRUS): application to the Hupsel Brook catchment and Cabauw polder, Hydrol. Earth Syst. Sci., 18, 4007-4028.

Games As Educational Tools in eARTh Science: MAREOPOLI and THE ENERGY CHALLENGE.

NASA Astrophysics Data System (ADS)

Garvani, Sara; Locritani, Marina; di Laura, Francesca; Stroobant, Mascha; Merlino, Silvia

2017-04-01

Research and researchers do have an important role in sustainable green and blue economy. It is also clear that outreach activities are fundamental to improve societal perception of Science past and present results and future insights or consequences and that is primary to change people's mentality. This is one of the main goals of the Scientific Dissemination Group (SDG) "La Spezia Gulf of Science", made up by Research Centres, Schools and Cultural associations located in La Spezia (Liguria, Italy). However, communicating scientific results means also improving educational methods: introducing tight relationship with artists (especially graphic designers), can produce unusual approaches and translate concepts in images which everyone can understand also under an emotional point of view. Images have a fundamental role for understanding and learning simple and less simple concepts, for example general public and high School students can be reached by interactive conferences with live speed painting (Locritani et al., 2016), and kids can be involved in interactive games. And games, especially, can reduce learning curves, since playing itself creates a natural forum for exchanging ideas and reflecting on natural phenomena and human impacts outside of class hours. Games, and the entertainment value of play, have the ability to teach and transform (Gobet et al., 2004). In this work we'll present two different games that raised from the collaboration between researchers and artists: MAREOPOLI and THE ENERGY CHALLENGE. MAREOPOLI (The City of Tides) is a simplified adaptation of the famous board game Monopoly, and consist of 36 spaces: 16 important historical and coastal cities having relevant tide phenomena, 8 Unexpected Events spaces (questions are asked on Modern Oceanography), 8 Curious Facts spaces (players receive information on historical records) and 4 corner squares: GO, (Blocked) in Limestone Grotto/Just Visiting, Free Beach Club, and Go to Limestone Grotto. Players move around the game-board attempting to take control of all 16 cities, with the goal of acquiring information about scientific facts related to tides, climate change and historical oceanographic records. A city is conquered by answering correctly to specific questions. THE ENERGY CHALLENGE (Bussei et al., 2002) is a role-playing game aimed to explain concepts related to energy and one of the deliverables of the FP6 project WESPA (2002-SCIENCEANDSOCIETY-2). It makes use of appealing playing cards that, through eye-catching images, exemplify the different forms and sources of energy and its transformation processes. The game has very simple rules and has been designed as an educational team game, to be used especially in schools, both primary and secondary. Players are organized in two teams, according to their assigned cards, and have to choose a game strategy that optimizes the available resources, their use and the general environmental sustainability. References Locritani, M., Stroobant, M., Talamoni R., Merlino, S., Guccinelli, G., Benvenuti, L., Zatta, C., Stricker, F., Zappa, F., and Sgherri, M. 2016. Re-evaluating Science and Technology through the lens of Arts and Graphic Design. A case study in La Spezia. (2006) In: Proceedings of European Geosciences Union General Assembly. Wien: EGU 2016, April 17-22. Vol. 18, EGU2016-4740-3. Bussei P., Bianucci M., Fieschi R., Gambarelli L., Mantovani C., Merlino S. (2007) "WESPA, a multilingual European Project for teaching Energy and Semiconductors concepts using interactive approaches", Journal of Materials Educations, 29 (3-4), 233 (2007). Gobet, F., Retschitzki, J., & de Voogt, A. (2004). Moves in mind: The psychology of board games. Psychology Press.

Using climate derivatives for assessment of meteorological parameter relationships in RCM and observations

NASA Astrophysics Data System (ADS)

Timuhins, Andrejs; Bethers, Uldis; Bethers, Peteris; Klints, Ilze; Sennikovs, Juris; Frishfelds, Vilnis

2017-04-01

In a changing climate it is essential to estimate its impacts on different economic fields. In our study we tried to create a framework for climate change assessment and climate change impact estimation for the territory of Latvia and to create results which are also understandable for non-scientists (stakeholder, media and public). This approach allowed us to more carefully assess the presentation and interpretation of results and their validation, for public viewing. For the presentation of our work a website was created (www.modlab.lv/klimats) containing two types of documents in a unified framework, meteorological parameter analysis of different easily interpretable derivative values. Both of these include analysis of the current situation as well as illustrate the projection for future time periods. Derivate values are calculated using two data sources: the bias corrected regional climate data and meteorological observation data. Derivative documents contain description of derived value, some interesting facts and conclusions. Additionally, all results may be viewed in temporal and spatial graphs and maps, for different time periods as well as different seasons. Bias correction (Sennikovs and Bethers, 2009) for the control period 1961-1990 is applied to RCM data series. Meteorological observation data of the Latvian Environment, Geology, and Meteorology Agency and ENSEMBLES project daily data of 13 RCM runs for the period 1960-2100 are used. All the documents are prepared in python notebooks, which allow for flexible changes. At the moment following derivative values have been published: forest fire risk index, wind energy, phenology (Degree days), road condition (friction, ice conditions), daily minimal meteorological visibility, headache occurrence rate, firs snow date and meteorological parameter analysis: temperature, precipitation, wind speed, relative humidity, and cloudiness. While creating these products RCM ability to represent the actual climate was analysed from different perspectives, for example, we found that forest fire index has qualitative differences depending on the data used in calculation either using observed data or RCM data, which could be caused by the differences in precipitation and temperature cross correlation (Bethers, P., Sennikovs, J. and Timuhins, A. 2011) The present work has been funded by the Latvian National Research Program on the "The value and dynamic of Latvia's ecosystems under changing climate" (EVIDEnT). References Sennikovs, J. and Bethers, U. (2009), Statistical downscaling method of regional climate model results for hydrological modelling. 18th World IMACS / MODSIM Congress, Cairns, Australia Bethers, P., Sennikovs, J. and Timuhins, A. (2011), Skill assessment of regional climate models:T/P correlations impacts on hydrological modeling. Geophysical Research Abstracts Vol. 13, EGU2011-7068, 2011 EGU General Assembly 2011

Recent Progress on the Second Generation CMORPH: LEO-IR Based Precipitation Estimates and Cloud Motion Vector

NASA Astrophysics Data System (ADS)

Xie, Pingping; Joyce, Robert; Wu, Shaorong

2015-04-01

As reported at the EGU General Assembly of 2014, a prototype system was developed for the second generation CMORPH to produce global analyses of 30-min precipitation on a 0.05olat/lon grid over the entire globe from pole to pole through integration of information from satellite observations as well as numerical model simulations. The second generation CMORPH is built upon the Kalman Filter based CMORPH algorithm of Joyce and Xie (2011). Inputs to the system include rainfall and snowfall rate retrievals from passive microwave (PMW) measurements aboard all available low earth orbit (LEO) satellites, precipitation estimates derived from infrared (IR) observations of geostationary (GEO) as well as LEO platforms, and precipitation simulations from numerical global models. Key to the success of the 2nd generation CMORPH, among a couple of other elements, are the development of a LEO-IR based precipitation estimation to fill in the polar gaps and objectively analyzed cloud motion vectors to capture the cloud movements of various spatial scales over the entire globe. In this presentation, we report our recent work on the refinement for these two important algorithm components. The prototype algorithm for the LEO IR precipitation estimation is refined to achieve improved quantitative accuracy and consistency with PMW retrievals. AVHRR IR TBB data from all LEO satellites are first remapped to a 0.05olat/lon grid over the entire globe and in a 30-min interval. Temporally and spatially co-located data pairs of the LEO TBB and inter-calibrated combined satellite PMW retrievals (MWCOMB) are then collected to construct tables. Precipitation at a grid box is derived from the TBB through matching the PDF tables for the TBB and the MWCOMB. This procedure is implemented for different season, latitude band and underlying surface types to account for the variations in the cloud - precipitation relationship. At the meantime, a sub-system is developed to construct analyzed fields of cloud motion vectors from the GEO/LEO IR based precipitation estimates and the CFS Reanalysis (CFSR) precipitation fields. Motion vectors are first derived separately from the satellite IR based precipitation estimates and the CFSR precipitation fields. These individually derived motion vectors are then combined through a 2D-VAR technique to form an analyzed field of cloud motion vectors over the entire globe. Error function is experimented to best reflect the performance of the satellite IR based estimates and the CFSR in capturing the movements of precipitating cloud systems over different regions and for different seasons. Quantitative experiments are conducted to optimize the LEO IR based precipitation estimation technique and the 2D-VAR based motion vector analysis system. Detailed results will be reported at the EGU.

Preliminary stable isotope results from the Mohos peat bog, East-Carpathians

NASA Astrophysics Data System (ADS)

Túri, Marianna; Palcsu, László; Futó, István; Hubay, Katalin; Molnár, Mihály; Rinyu, László; Braun, Mihály

2016-04-01

This work provides preliminary results of an isotope investigation carried out on a peat core drilled in the ombrotrophic Mohos peat bog, Ciomadul Mountain, (46°8'3.60"N, 25°54'19.43"E, 1050 m.a.s.l.), East Carpathians, Romania. The Ciomadul is a single dacitic volcano with two craters: the younger Saint Ana and the older Mohos which is a peat bog, and surrounded by a number of individual lava domes as well as a narrow volcaniclastic ring plain volcano. A 10 m long peat core has been taken previously, and is available for stable oxygen and carbon isotope analysis. It is known from our previous work (Hubay et al., 2015) that it covers a period from 11.500 cal year B.P. to present. The peat bog is composed mainly of Sphagnum, which has a direct relationship with the environment, making it suitable for examine the changes in the surrounding circumstances. Isotopic analysis of the prepared cellulose from Sphagnum moss has the attribute to provide such high resolution quantitative estimates of the past climate and there is no such climate studies in this area where the past climate investigations based on oxygen isotope analysis of the Sphagnum. Oxygen and carbon stable isotope analysis were carried out on the hemicellulose samples, which were chemically prepared for 14C dating and taken from every 30 cm of the 10 m long peat core. The oxygen isotope composition of the precipitation can be revealed from the δ18O values of the prepared cellulose samples, since, while carbon isotope ratio tells more about the wet and dry periods of the past. Studying both oxygen and carbon isotope signatures, slight fluctuations can be seen during the Holocene like some of the six periods of significant climate changes can be seen in this resolution during the time periods of 9000-8000, 6000-5000, 4200-3800, 3500-2500, 1200-1000, and 600-150 cal yr B.P. Additionally, the late Pleistocene - early Holocene environmental changes can be clearly observed as Pleistocene peat samples have increasingly negative delta values as going back in time. All measurements were carried out in Hertelendi Laboratory of Environmental Studies, Institute for Nuclear Research, Hungarian Academy of Sciences. Katalin Hubay, Mihály Braun, Sándor Harangi, László Palcsu, Marianna Túri, László Rinyu, Mihály Molnár, 2015. European Geosciences Union (EGU) General Assembly 2015, Radiocarbon dating of Sphagnum cellulose from Mohos peat bog, East Carpathians, accepted in CL5.10/GM1.10 Geophysical Research Abstracts Vol. 17, EGU2015-10813, 2015

Parallel Processing of Numerical Tsunami Simulations on a High Performance Cluster based on the GDAL Library

NASA Astrophysics Data System (ADS)

Schroeder, Matthias; Jankowski, Cedric; Hammitzsch, Martin; Wächter, Joachim

2014-05-01

Thousands of numerical tsunami simulations allow the computation of inundation and run-up along the coast for vulnerable areas over the time. A so-called Matching Scenario Database (MSDB) [1] contains this large number of simulations in text file format. In order to visualize these wave propagations the scenarios have to be reprocessed automatically. In the TRIDEC project funded by the seventh Framework Programme of the European Union a Virtual Scenario Database (VSDB) and a Matching Scenario Database (MSDB) were established amongst others by the working group of the University of Bologna (UniBo) [1]. One part of TRIDEC was the developing of a new generation of a Decision Support System (DSS) for tsunami Early Warning Systems (TEWS) [2]. A working group of the GFZ German Research Centre for Geosciences was responsible for developing the Command and Control User Interface (CCUI) as central software application which support operator activities, incident management and message disseminations. For the integration and visualization in the CCUI, the numerical tsunami simulations from MSDB must be converted into the shapefiles format. The usage of shapefiles enables a much easier integration into standard Geographic Information Systems (GIS). Since also the CCUI is based on two widely used open source products (GeoTools library and uDig), whereby the integration of shapefiles is provided by these libraries a priori. In this case, for an example area around the Western Iberian margin several thousand tsunami variations were processed. Due to the mass of data only a program-controlled process was conceivable. In order to optimize the computing efforts and operating time the use of an existing GFZ High Performance Computing Cluster (HPC) had been chosen. Thus, a geospatial software was sought after that is capable for parallel processing. The FOSS tool Geospatial Data Abstraction Library (GDAL/OGR) was used to match the coordinates with the wave heights and generates the different shapefiles for certain time steps. The shapefiles contain afterwards lines for visualizing the isochrones of the wave propagation and moreover, data about the maximum wave height and the Estimated Time of Arrival (ETA) at the coast. Our contribution shows the entire workflow and the visualizing results of the-processing for the example region Western Iberian ocean margin. [1] Armigliato A., Pagnoni G., Zaniboni F, Tinti S. (2013), Database of tsunami scenario simulations for Western Iberia: a tool for the TRIDEC Project Decision Support System for tsunami early warning, Vol. 15, EGU2013-5567, EGU General Assembly 2013, Vienna (Austria). [2] Löwe, P., Wächter, J., Hammitzsch, M., Lendholt, M., Häner, R. (2013): The Evolution of Service-oriented Disaster Early Warning Systems in the TRIDEC Project, 23rd International Ocean and Polar Engineering Conference - ISOPE-2013, Anchorage (USA).

Estimating State-Specific Contributions to PM2.5- and O3-Related Health Burden from Residential Combustion and Electricity Generating Unit Emissions in the United States

PubMed Central

Penn, Stefani L.; Arunachalam, Saravanan; Woody, Matthew; Heiger-Bernays, Wendy; Tripodis, Yorghos; Levy, Jonathan I.

2016-01-01

Background: Residential combustion (RC) and electricity generating unit (EGU) emissions adversely impact air quality and human health by increasing ambient concentrations of fine particulate matter (PM2.5) and ozone (O3). Studies to date have not isolated contributing emissions by state of origin (source-state), which is necessary for policy makers to determine efficient strategies to decrease health impacts. Objectives: In this study, we aimed to estimate health impacts (premature mortalities) attributable to PM2.5 and O3 from RC and EGU emissions by precursor species, source sector, and source-state in the continental United States for 2005. Methods: We used the Community Multiscale Air Quality model employing the decoupled direct method to quantify changes in air quality and epidemiological evidence to determine concentration–response functions to calculate associated health impacts. Results: We estimated 21,000 premature mortalities per year from EGU emissions, driven by sulfur dioxide emissions forming PM2.5. More than half of EGU health impacts are attributable to emissions from eight states with significant coal combustion and large downwind populations. We estimate 10,000 premature mortalities per year from RC emissions, driven by primary PM2.5 emissions. States with large populations and significant residential wood combustion dominate RC health impacts. Annual mortality risk per thousand tons of precursor emissions (health damage functions) varied significantly across source-states for both source sectors and all precursor pollutants. Conclusions: Our findings reinforce the importance of pollutant-specific, location-specific, and source-specific models of health impacts in design of health-risk minimizing emissions control policies. Citation: Penn SL, Arunachalam S, Woody M, Heiger-Bernays W, Tripodis Y, Levy JI. 2017. Estimating state-specific contributions to PM2.5- and O3-related health burden from residential combustion and electricity generating unit emissions in the United States. Environ Health Perspect 125:324–332; http://dx.doi.org/10.1289/EHP550 PMID:27586513

75 FR 67770 - General Motors Company, Formerly Known as General Motors Corporation, Orion Assembly Plant...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

..., Formerly Known as General Motors Corporation, Orion Assembly Plant, Including On-Site Leased Workers From... of General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant, Lake... General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant. The Department...

Influence of tropical atmospheric variability on Weddell Sea deep water convection

NASA Astrophysics Data System (ADS)

Kleppin, H.

2016-02-01

Climate reconstructions from ice core records in Greenland and Antarctica have revealed a series of abrupt climate transitions, showing a distinct relationship between northern and southern hemisphere climate during the last glacial period. The recent ice core records from West Antarctica (WAIS) point towards an atmospheric teleconnection as a possible trigger for the interhemispheric climate variability (Markle et al., 2015). An unforced simulation of the Community Climate System Model, version 4 (CCSM4) reveals Greenland warming and cooling events, caused by stochastic atmospheric forcing, that resemble Dansgaard-Oeschger cycles in pattern and magnitude (Kleppin et al., 2015). Anti-phased temperature changes in the Southern Hemisphere are small in magnitude and have a spatially varying pattern. We argue that both north and south high latitude climate variability is triggered by changes in tropical atmospheric deep convection in the western tropical Pacific. The atmospheric wave guide provides a fast communication pathway connecting the deep tropics and the polar regions. In the Southern Hemisphere this is manifested as a distinct pressure pattern over West Antarctica. These altered atmospheric surface conditions over the convective region can lead to destabilization of the water column and thus to convective overturning in the Weddell Sea. However, opposed to what is seen in the Northern Hemisphere no centennial scale variability can establish, due to the absence of a strong feedback mechanism between ocean, atmosphere and sea ice. Kleppin, H., Jochum, M., Otto-Bliesner, B., Shields, C. A., & Yeager, S. (2015). Stochastic Atmospheric Forcing as a Cause of Greenland Climate Transitions. Journal of Climate, (2015). Markle, B. and Coauthors (2015, April). Atmospheric teleconnections between the tropics and high southern latitudes during millennial climate change. In EGU General Assembly Conference Abstracts (Vol. 17, p. 2569).

75 FR 54388 - General Motors Company Formerly Known as General Motors Corporation, Orion Assembly Plant...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-07

... Formerly Known as General Motors Corporation, Orion Assembly Plant Including On-Site Leased Workers From... Motors Corporation, Orion Assembly Plant, Lake Orion, Michigan. The notice was published in the Federal..., Michigan location of General Motors Company, formerly known as General Motors Corporation, Orion Assembly...

Bioprocessing of Biodiesel Industry Effluent by Immobilized Bacteria to Produce Value-Added Products.

PubMed

Prakash, Jyotsana; Gupta, Rahul Kumar; Xx, Priyanka; Kalia, Vipin Chandra

2018-05-01

Biodiesel industrial effluent rich in crude glycerol (CG) was processed to produce value-added product. Under continuous culture system, Bacillus amyloliquefaciens strain CD16 immobilized within its biofilm, produced 3.2 L H 2 /day/L feed, over a period of 60 days at a hydraulic retention time of 2 days. The effective H 2 yield by B. amyloliquefaciens strain CD16 was 165 L/L CG. This H 2 yield was 1.18-fold higher than that observed with non-biofilm forming Bacillus thuringiensis strain EGU45. Bioprocessing of the effluent released after this stage, by recycling it up to 25% did not have any adverse effect on H 2 production by strain EGU45; however, a 25% reduction in yield was recorded with strain CD16. Biofilm forming H 2 producers thus proved effective as self-immobilizing system leading to enhanced process efficiency.

Northern Eurasia Earth Science Partnership Initiative in the past 12 months: An Update

NASA Astrophysics Data System (ADS)

Groisman, Pavel; Lowford, Richard

2013-04-01

Eight years ago Northern Eurasia Earth Science Partnership Initiative (NEESPI) was launched with the release of its Science Plan (http://neespi.org). Gradually, the Initiative was joined by numerous international projects launched in EU, Russia, the United States, Canada, Japan, and China. Throughout its duration, NEESPI served and is serving as an umbrella for more than 155 individual international research projects. Currently, the total number of the ongoing NEESPI projects (as on January 2013) is 48 and has changed but slightly compared to its peak (87 in 2008). The past 12 months (from the previous EGU Assembly) were extremely productive in the NEESPI outreach. We organized three Open Science Sessions at the three major Geoscience Unions/Assembly Meetings (JpGU, AGU, and this EGU Session) and three International NEESPI Workshops. The programs of two of these Workshops (in Yoshkar Ola and Irkutsk, Russia) included Summer Schools for early career scientists. More than 150 peer-reviewed papers, books, and/or book chapters were published in 2012 or are in press (this list was still incomplete at the time of preparation of this abstract). In particular, a suite of 25 peer-reviewed NEESPI articles was published in the Forth Special NEESPI Issue of "Environmental Research Letters" (ERL) http://iopscience.iop.org/1748-9326/focus/NEESPI3 (this is the third ERL Issue). In December 2012, the next Special ERL NEESPI Issue was launched http://iopscience.iop.org/1748-9326/focus/NEESPI4. Northern Eurasia is a large study domain. Therefore, it was decided to describe the latest findings related to its environmental changes in several regional monographs in English. Three books on Environmental Changes in the NEESPI domain were published by the University of Helsinki (Groisman et al. 2012), "Akademperiodyka" (Groisman and Lyalko 2012), and Springer Publishing House (Groisman and Gutman 2013) being devoted to the high latitudes of Eurasia, to Eastern Europe, and to Siberia respectively. We expect that one more book (Chen et al. 2013) will be published simultaneously by Higher Education Press and De Gruyter Publ. House prior to commence of this Assembly. In this presentation, the description of the NEESPI Program will be complemented with an overview of the results presented in the latest our books "Earth System Change over Eastern Europe", "Regional Environmental Changes in Siberia and Their Global Consequences", and "Dryland East Asia: Land Dynamics amid Social and Climate Change" and the future of the Initiative will be discussed. Cited references: • Groisman, P.Ya., A. Reissell, and Marjut Kaukolehto (eds.) 2012: Proceedings of the Northern Eurasian Earth Science Partnership Initiative (NEESPI) Regional Science Team Meeting devoted to the High Latitudes. Report Series in Aerosol Science, No. 130, Helsinki, Finland, 153 pp. • Groisman, P.Ya. and V.I. Lyalko (eds.) 2012: Earth Systems Change over Eastern Europe. Akademperiodyka, Kiev, The Ukraine, 488 pp. ISBN 978-966-360-195-3. • Groisman and Gutman (eds.) 2013: Environmental Changes in Siberia: Regional Changes and their Global Consequences. Springer, Amsterdam, The Netherlands, 357 pp. doi:10.1007/978-94-007-4569-8 • Chen, J., S. Wan, J. Qi, G. Henebry, M Kappas, and G. Sun (eds.) 2013: Region of East Asia: Land Dynamics amid Social and Climate Change. Beijing: Higher Education Press and Berlin: De Gruyter. (in press)

Air quality impacts of plug-in hybrid electric vehicles in Texas: evaluating three battery charging scenarios

NASA Astrophysics Data System (ADS)

Thompson, Tammy M.; King, Carey W.; Allen, David T.; Webber, Michael E.

2011-04-01

The air quality impacts of replacing approximately 20% of the gasoline-powered light duty vehicle miles traveled (VMT) with electric VMT by the year 2018 were examined for four major cities in Texas: Dallas/Ft Worth, Houston, Austin, and San Antonio. Plug-in hybrid electric vehicle (PHEV) charging was assumed to occur on the electric grid controlled by the Electricity Reliability Council of Texas (ERCOT), and three charging scenarios were examined: nighttime charging, charging to maximize battery life, and charging to maximize driver convenience. A subset of electricity generating units (EGUs) in Texas that were found to contribute the majority of the electricity generation needed to charge PHEVs at the times of day associated with each scenario was modeled using a regional photochemical model (CAMx). The net impacts of the PHEVs on the emissions of precursors to the formation of ozone included an increase in NOx emissions from EGUs during times of day when the vehicle is charging, and a decrease in NOx from mobile emissions. The changes in maximum daily 8 h ozone concentrations and average exposure potential at twelve air quality monitors in Texas were predicted on the basis of these changes in NOx emissions. For all scenarios, at all monitors, the impact of changes in vehicular emissions, rather than EGU emissions, dominated the ozone impact. In general, PHEVs lead to an increase in ozone during nighttime hours (due to decreased scavenging from both vehicles and EGU stacks) and a decrease in ozone during daytime hours. A few monitors showed a larger increase in ozone for the convenience charging scenario versus the other two scenarios. Additionally, cumulative ozone exposure results indicate that nighttime charging is most likely to reduce a measure of ozone exposure potential versus the other two scenarios.

Assessment of Non-EGU NOx Emission Controls, Cost of Controls, and Time for Compliance Final TSD

EPA Pesticide Factsheets

The purpose of this Technical Support Document (TSD) is to discuss the currently available information on emissions and control measures for sources of NOX other than electric generating units (EGUs).

Nonlinear Generation of shear flows and large scale magnetic fields by small scale

NASA Astrophysics Data System (ADS)

Aburjania, G.

2009-04-01

EGU2009-233 Nonlinear Generation of shear flows and large scale magnetic fields by small scale turbulence in the ionosphere by G. Aburjania Contact: George Aburjania, g.aburjania@gmail.com,aburj@mymail.ge

Dynamical contibution of Mean Potential Vorticity pseudo-observations derived from MetOp/GOME2 Ozone data into weather forecast, a Mediterranean High Precipitation Event study.

NASA Astrophysics Data System (ADS)

Sbii, Siham; Zazoui, Mimoun; Semane, Noureddine

2015-04-01

In the absence of observations covering the upper troposphere - lower stratophere, headquarters of several disturbances, and knowing that satellites are uniquely capable of providing uniform data coverage globally, a methodology is followed [1] to convert Total Column Ozone, observed by MetOp/GOME2, into pseudo-observations of Mean Potential Vorticity (MPV). The aim is to study the dynamical impact of Ozone data in the prediction of a Mediterranean Heavy Precipitation Event observed during 28-29 September 2012 in the context of HYMEX1. This study builds on a previously described methodology [2] that generates numerical weather prediction model initial conditions from ozone data. Indeed, the assimilation of MPV in a 3D-var framework is based on a linear regression between observed Ozone and vertical integrated Ertel PV. The latter is calculated using dynamical fields from the moroccan operational limited area model ALADIN-MAROC according to [3]: δθ fp p0 -R δU δV P V = - gξaδp- g-R-(p )Cp [(δp-)2 + (δp-)2] (1) Where ξa is the vertical component of the absolute vorticity, U and V the horizontal wind components, θ the potential temperature, R gas constant, Cp specific heat at constant pressure, p the pressure, p0 a reference pressure, g the gravity and f is the Coriolis parameter. The MPV is estimated using the following expression: --1--∫ P2 M PV = P1 - P2 P P V.δp 1 (2) With P1 = 500hPa and P2 = 100hPa In the present study, the linear regression is performed over September 2012 with a correlation coefficient of 0.8265 and is described as follows: M P V = 5.314610- 2 *O3 - 13.445 (3) where O3 and MPV are given in Dobson Unit (DU) and PVU (1 PV U = 10-6 m2 K kg-1 s-1), respectively. It is found that the ozone-influenced upper-level initializing fields affect the precipitation forecast, as diagnosed by a comparison with the ECMWF model. References [1] S. Sbii, N. Semane, Y. Michel, P. Arbogast and M. Zazoui (2012). Using METOP/GOME-2 data and MSG ozone data as Potential Vorticity pseudo-observations, Geophysical Research Abstracts Vol. 14, EGU2012-8926, EGU General Assembly. [2] S. Sbii, M. Zazoui, N. Semane, Y. Michel and P. Arbogast (2013). Exploring the Potential Application of MetOp/GOME2 Ozone Data to Weather Analysis.IJCSI, Vol. 10, Issue 2, No 3, March 2013: 260-263. [3] Guerin, R., Desroziers, G. and Arbogast, P. (2006). 4D-Var analysis of potential vorticity pseudo-observations. Q.J.R. Meteorol. Soc., 132: 1283-1298.

Assessing river-groundwater exchange fluxes of the Wairau River, New Zealand

NASA Astrophysics Data System (ADS)

Wilson, Scott; Woehling, Thomas; Davidson, Peter

2014-05-01

Allocation limits in river-recharged aquifers have traditionally been based on static observations of river gains and losses undertaken when river flow is low. This approach to setting allocation limits does not consider the dynamic relationship between river flows and groundwater levels. Predicting groundwater availability based on a better understanding of coupled river - aquifer systems opens the possibility for dynamic groundwater allocation approaches. Numerical groundwater models are most commonly used for regional scale allocation assessments. Using these models for predicting future system states is challenging, particularly under changing management and climate scenarios. The large degree of uncertainty associated with these predictions is caused by insufficient knowledge about the heterogeneity of subsurface flow characteristics, ineffective monitoring designs, and the inability to confidently predict the spatially and temporally varying river - groundwater exchange fluxes. These uncertainties are characteristic to many coupled surface water - groundwater systems worldwide. Braided river systems, however, create additional challenges due to their highly dynamic morphological character and mobile beds which also make river flow measurements extremely difficult. This study focuses on the characterization of river - groundwater exchange fluxes along a section of the Wairau River in the Northwest of the South Island of New Zealand. The braided river recharges the Wairau Aquifer which is an important source for irrigation and municipal water requirements of the city of Blenheim. The Wairau Aquifer is hosted by the highly permeable Rapaura Formation gravels that extend to a depth of about 20 to 30 m. However, the overall thickness of the alluvial sequence forming the Wairau Plain may be up to 500 m. The landuse in the area is mainly grapes but landsurface recharge to the aquifer is considered to be considerably smaller than the recharge from the Wairau river. This study aims at the assessment of river-groundwater exchange fluxes and presents first results from data mining and analysis of river flow records, stage gaugings, groundwater head data, pumping test, and the sampling of spring flows. In addition, a methodology is presented that will allow the prediction of transient river exchange fluxes by using a Modflow model, global optimisation techniques, and techniques for quantifying predictive uncertainty which have been recently developed (Wöhling et al 2013). A long-term goal of the study is the reduction of predictive uncertainty of model predictions by optimal design of sensor networks as well as the assessment of this utility by different observation types. Preliminary results indicate that about 7 cumec from the Wairau River is recharged to the aquifer under low flow conditions. A similar volume of groundwater re-emerges as springs where groundwater is forced upwards by the confining Dillons Point Formation. References Wöhling, Th., Gosses, M.J., Leyes Pérez, M., Geiges, A., Moore, C.R., Osenbrück, K., Scott, D.M. (2013). Optimizing monitoring design to increase predictive reliability of groundwater flow models at different scales. Geophysical Research Abstracts Vol. 15, EGU2013-3981, EGU General Assembly 2013.

Effect of biosolid waste compost on soil respiration in salt-affected soils

NASA Astrophysics Data System (ADS)

Raya, Silvia; Gómez, Ignacio; García, Fuensanta; Navarro, José; Jordán, Manuel Miguel; Belén Almendro, María; Martín Soriano, José

2013-04-01

A great part of mediterranean soils are affected by salinization. This is an important problem in semiarid areas increased by the use of low quality waters, the induced salinization due to high phreatic levels and adverse climatology. Salinization affects 25% of irrigated agriculture, producing important losses on the crops. In this situation, the application of organic matter to the soil is one of the possible solutions to improve their quality. The main objective of this research was to asses the relation between the salinity level (electrical conductivity, EC) in the soil and the response of microbial activity (soil respiration rate) after compost addition. The study was conducted for a year. Soil samples were collected near to an agricultural area in Crevillente and Elche, "El Hondo" Natural Park (Comunidad de Regantes from San Felipe Neri). The experiment was developed to determine and quantify the soil respiration rate in 8 different soils differing in salinity. The assay was done in close pots -in greenhouse conditions- containing soil mixed with different doses of sewage sludge compost (2, 4 and 6%) besides the control. They were maintained at 60% of water holding capacity (WHC). Soil samples were analyzed every four months for a year. The equipment used to estimate the soil respiration was a Bac-Trac and CO2 emitted by the soil biota was measured and quantified by electrical impedance changes. It was observed that the respiration rate increases as the proportion of compost added to each sample increases as well. The EC was incremented in each sampling period from the beginning of the experiment, probably due to the fact that soils were in pots and lixiviation was prevented, so the salts couldńt be lost from soil. Over time the compost has been degraded and, it was more susceptible to be mineralized. Salts were accumulated in the soil. Also it was observed a decrease of microbial activity with the increase of salinity in the soil. Keywords: soil respiration, compost, electrical conductivity, salinization, Bac-Trac References: Abdelbasset Lakhdar, Mokded Rabhi, Tahar Ghnaya, Francesco Montemurro, Naceur Jedidi , Chedly Abdelly. Effectiveness of compost use in salt-affected soil. Journal of Hazardous Materials 171 (2009) pp 29-37. M. Tejada, C. Garcia, J.L. Gonzalez , M.T. Hernandez . Use of organic amendment as a strategy for saline soil remediation:Influence on the physical, chemical and biological properties of soil. Soil Biology & Biochemistry 38 (2006) pp 1413-1421. I. Gomez; J.M. Disla Soriano; J. Navarro-Pedreño; F. García-Orenes; M.B. Almendro-Candel; M.M. Jordan. Quantification of soil respiration in different saline soil of Alicante (Spain). EGU General Assembly (2012). Viena. Ed. Geophysycal Research Abstracts. Vol 14 EGU2012-2399,(2012). (Acknowledgements: This work was supported by the Spanish MICINN. Project Ref.: CGL2009-11194)

Geodiversity and biodiversity interactions in the sand landscapes of the Netherlands on 19th and early 20th century landscape paintings

NASA Astrophysics Data System (ADS)

Jungerius, Pieter; van den Ancker, Hanneke

2014-05-01

Sand landscapes occupy about half of the territory of the Netherlands. Apart from an insignificant amount of Tertiary deposits, these sands are of Pleistocene and Holocene age. They include Saalian push moraines, Weichselian cover sands and Holocene drift sands. To these geological landscapes, cultural variants should be added such as the essen, i.e. a landscape with plaggen soils, and reclaimed lands (e.g. former moors). Not included are the coastal sands, which we dealt with in an earlier EGU contribution (van den Ancker & Jungerius 2012). Nature and man created a wide variety of sceneries that inspired painters in the 19th and early 20th century (Jungerius et al. 2012). Painter communities on the sandy soils flourished in Oosterbeek/Wolfheze, Laren/Blaricum, Nijkerk, Nunspeet/Elspeet, Hattem and Heeze. Many of the landscape paintings are found in the database of Simonis en Buunk that can be freely consulted on line (http//www.simonis&buunk.com). For this presentation we selected specimens that show geodiversity-biodiversity relationships, some of which have changed since. Painters of push moraines were attracted by the rolling terrain, the dry valleys and occasionally the colourful podzol soil profiles. Popular themes in the cover sands were the undulating relief and heathlands with herds of sheep, sandy footpaths and country roads with erosion phenomena. The dynamics of erosion captivated the painters of Holocene drift sand scenery, as did the bare fields of cultivated lands. Their paintings show the rural areas that since the beginning of the 20th century lost their traditional charm in large-scale re-allotment schemes and artificial nature-building project, that changed geodiversity-biodiversity relationships. Changes in the sandy terrains that can be inferred from the paintings are on a landscape scale, the scale of the landform and vegetation type, and are illustrated by changes in colour, pattern, structure and texture. Examples are: · active drift sands with erosional phenomena, most vanished as a result of afforestation and eutrophic precipitation; · wetland heath habitats, that largely disappeared due to reclamation and regional lowering of the groundwater table; · grazing of herded sheep of local breed on geo-structured heathlands, that is recently re-introduced for nature mangement purposes; · smaller agricultural plots on undulating 'essen' with crops such as buckwheat and wheat, now replaced by level terrain and maize monocultures; · monumental old trees on the oldest landscape paintings, often on river banks, are notably absent on later paintings. References Jungerius P, van den Ancker H, Wevers N 2012. The contribution of Dutch landscape painters to the conservation of geoheritage. Geology Today 28,3. Hanneke van den Ancker & Pieter Dirk Jungerius, 2012. Landscape paintings, a tool for research, planning and management of the coastal zone. Presentation General Assembly European Geosciences Union EGU - SSS, Vienna.

Experimental modelling of wave amplification over irregular bathymetry for investigations of boulder transport by extreme wave events.

NASA Astrophysics Data System (ADS)

O'Boyle, Louise; Whittaker, Trevor; Cox, Ronadh; Elsäßer, Björn

2017-04-01

During the winter of 2013-2014 the west coast of Ireland was exposed to 6 storms over a period of 8 weeks with wind speeds equating to hurricane categories 3 and 4. During this period, the largest significant wave height recorded at the Marine Institute M6 wave buoy, approximately 300km from the site, was 13.6m (on 26th January 2014). However, this may not be the largest sea state of that winter, because the buoy stopped logging on 30th January and therefore failed to capture the full winter period. During the February 12th 2014 "Darwin" storm, the Kinsale Energy Gas Platform off Ireland's south coast measured a wave height of 25 m, which remains the highest wave measured off Ireland's coasts[1]. Following these storms, significant dislocation and transportation of boulders and megagravel was observed on the Aran Islands, Co. Galway at elevations of up to 25m above the high water mark and distances up to 220 m inland including numerous clasts with masses >50t, and at least one megagravel block weighing >500t [2]. Clast movements of this magnitude would not have been predicted from the measured wave heights. This highlights a significant gap in our understanding of the relationships between storms and the coastal environment: how are storm waves amplified and modified by interactions with bathymetry? To gain further understanding of wave amplification, especially over steep and irregular bathymetry, we have designed Froude-scaled wave tank experiments using the 3D coastal wave basin facility at Queen's University Belfast. The basin is 18m long by 16m wide with wave generation by means of a 12m wide bank of 24 top hinged, force feedback, sector carrier wave paddles at one end. The basin is equipped with gravel beaches to dissipate wave energy on the remaining three sides, capable of absorbing up to 99% of the incident wave energy, to prevent unwanted reflections. Representative bathymetry for the Aran Islands is modelled in the basin based on a high resolution nearshore multibeam sonar survey. Water surface elevation is recorded using twin-wire resistance type wave probes along a shore-normal bathymetry transect as the waves shoal. Variations in significant wave height and maximum elevation are presented for both regular and irregular bathymetry and for a number of typical North Atlantic sea states. These results are significant for calibration of numerical wave propagation models over irregular bathymetry and for those seeking to understand the magnitude of nearshore extreme wave events. References [1] Met Éireann, 2014, Winter 2013/2014: Monthly Weather Bulletin, December issue, p. 1-5. http://www.met.ie/climate-ireland/weather-events/winterstorms13_14.pdf. [2] Cox, R. et. al., 2016, Movement of boulders and megagravel by storm waves Vol. 18, EGU2016-10535, 2016 EGU General Assembly 2016

Classification as a generic tool for characterising status and changes of regional scale groundwater systems

NASA Astrophysics Data System (ADS)

Barthel, Roland; Haaf, Ezra

2016-04-01

Regional hydrogeology is becoming increasingly important, but at the same time, scientifically sound, universal solutions for typical groundwater problems encountered on the regional scale are hard to find. While managers, decision-makers and state agencies operating on regional and national levels have always shown a strong interest in regional scale hydrogeology, researchers from academia tend to avoid the subject, focusing instead on local scales. Additionally, hydrogeology has always had a tendency to regard every problem as unique to its own site- and problem-specific context. Regional scale hydrogeology is therefore pragmatic rather than aiming at developing generic methodology (Barthel, 2014; Barthel and Banzhaf, 2016). One of the main challenges encountered on the regional scale in hydrogeology is the extreme heterogeneity that generally increases with the size of the studied area - paired with relative data scarcity. Even in well-monitored regions of the world, groundwater observations are usually clustered, leaving large areas without any direct data. However, there are many good reasons for assessing the status and predicting the behavior of groundwater systems under conditions of global change even for those areas and aquifers without observations. This is typically done by using rather coarsely discretized and / or poorly parameterized numerical models, or by using very simplistic conceptual hydrological models that do not take into account the complex three-dimensional geological setup. Numerical models heavily rely on local data and are resource-demanding. Conceptual hydrological models only deliver reliable information on groundwater if the geology is extremely simple. In this contribution, we present an approach to derive statistically relevant information for un-monitored areas, making use of existing information from similar localities that are or have been monitored. The approach combines site-specific knowledge with conceptual assumptions on the behavior of groundwater systems. It is based on the hypothesis that similar groundwater systems respond similarly to similar impacts. At its core is the classification of (i) static hydrogeological characteristics (such as aquifer geometry and hydraulic properties), (ii) dynamic changes of the boundary conditions (such as recharge, water levels in surface waters), and (iii) dynamic groundwater system responses (groundwater head and chemical parameters). The dependencies of system responses on explanatory variables are used to map knowledge from observed locations to areas without measurements. Classification of static and dynamic system features combined with information about known system properties and their dependencies provide insight into system behavior that cannot be directly derived through the analysis of raw data. Classification and dependency analysis could finally lead to a new framework for groundwater system assessment on the regional scale as a replacement or supplement to numerical groundwater models and catchment scale hydrological models. This contribution focusses on the main hydrogeological concepts underlying the approach while another EGU contribution (Haaf and Barthel, 2016) explains the methodologies used to classify groundwater systems. References: Barthel, R., 2014. A call for more fundamental science in regional hydrogeology. Hydrogeol J, 22(3): 507-510. Barthel, R., Banzhaf, S., 2016. Groundwater and Surface Water Interaction at the Regional-scale - A Review with Focus on Regional Integrated Models. Water Resour Manag, 30(1): 1-32. Haaf, E., Barthel, R., 2016. An approach for classification of hydrogeological systems at the regional scale based on groundwater hydrographs. Abstract submitted to EGU General Assembly 2016, Vienna, Austria.

29 CFR 1926.1406 - Assembly/Disassembly-employer procedures-general requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 8 2012-07-01 2012-07-01 false Assembly/Disassembly-employer procedures-general... CONSTRUCTION Cranes and Derricks in Construction § 1926.1406 Assembly/Disassembly—employer procedures—general requirements. (a) When using employer procedures instead of manufacturer procedures for assembly/disassembly...

29 CFR 1926.1406 - Assembly/Disassembly-employer procedures-general requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 8 2014-07-01 2014-07-01 false Assembly/Disassembly-employer procedures-general... CONSTRUCTION Cranes and Derricks in Construction § 1926.1406 Assembly/Disassembly—employer procedures—general requirements. (a) When using employer procedures instead of manufacturer procedures for assembly/disassembly...

29 CFR 1926.1406 - Assembly/Disassembly-employer procedures-general requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 8 2013-07-01 2013-07-01 false Assembly/Disassembly-employer procedures-general... CONSTRUCTION Cranes and Derricks in Construction § 1926.1406 Assembly/Disassembly—employer procedures—general requirements. (a) When using employer procedures instead of manufacturer procedures for assembly/disassembly...

29 CFR 1926.1406 - Assembly/Disassembly-employer procedures-general requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Assembly/Disassembly-employer procedures-general... CONSTRUCTION Cranes and Derricks in Construction § 1926.1406 Assembly/Disassembly—employer procedures—general requirements. (a) When using employer procedures instead of manufacturer procedures for assembly/disassembly...

77 FR 6587 - General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-08

... Manufacturing, Formerly Known as General Motors Corporation, Shreveport Assembly Plant, Including On-Site Leased... Vehicle Manufacturing, formerly known as General Motors Corporation, Shreveport Assembly Plant, including..., formerly known as General Motors Corporation, Shreveport Assembly Plant. The Department has determined that...

A degassing instrument for analysing CO2 dissolved in natural water

NASA Astrophysics Data System (ADS)

Durham, Brian; Pfrang, Christian

2017-04-01

Arising from our EGU 2017 presentation (http://meetingorganizer.copernicus.org/EGU2016/posters/20564, X2 352), interest has been expressed in its application to the analysis of the hydrocarbonate ion [HCO3-] in atmospheric water. Arising from the historic difficulty in analysing the aqueous [HCO3-] ion ('it is in all our reagents', pers. comm. UK laboratory) the classic determination has been to measure a suite of other anions and cations including [H+] via pH, and to treat the balance of negative charge as a measure of [HCO3-]. From this balance, dissolved CO2 can be inferred via the dissociation constant as published for pure water. CO2 + H2O ⇓♢[HCO3-] + [H+] K1 = 4.2 x 10-7 Our EGU 2016 presentation sought to determine how the ionic environment in 263 UK rain samples can influence the above equilibrium, which is work in progress. In the mean time we have received the following expression of interest from an atmospheric science advisory group. …….. is very interested in the role of H-carbonate in the ion balance of precipitation. They have had some discussions recently about the best approach to infer H-carbonate currently discussing the possibility of sending you samples from other locations for analysis. We have duly offered to use our degassing instrument to corroborate current analyses in a batch of 'blind' samples, and to provide a design for a basic degasser that water quality laboratories could evaluate in house. This paper therefore presents a circuit for degassing CO2 from water samples irrespective of whether in atmospheric equilibrium or supersaturated, including a prototype 4-way distribution and collection valve which it is hoped will make the analysis intuitive and therefore open to automation.

A framework for quantification of groundwater dynamics - concepts and hydro(geo-)logical metrics

NASA Astrophysics Data System (ADS)

Haaf, Ezra; Heudorfer, Benedikt; Stahl, Kerstin; Barthel, Roland

2017-04-01

Fluctuation patterns in groundwater hydrographs are generally assumed to contain information on aquifer characteristics, climate and environmental controls. However, attempts to disentangle this information and map the dominant controls have been few. This is due to the substantial heterogeneity and complexity of groundwater systems, which is reflected in the abundance of morphologies of groundwater time series. To describe the structure and shape of hydrographs, descriptive terms like "slow"/ "fast" or "flashy"/ "inert" are frequently used, which are subjective, irreproducible and limited. This lack of objective and refined concepts limit approaches for regionalization of hydrogeological characteristics as well as our understanding of dominant processes controlling groundwater dynamics. Therefore, we propose a novel framework for groundwater hydrograph characterization in an attempt to categorize morphologies explicitly and quantitatively based on perceptual concepts of aspects of the dynamics. This quantitative framework is inspired by the existing and operational eco-hydrological classification frameworks for streamflow. The need for a new framework for groundwater systems is justified by the fundamental differences between the state variable groundwater head and the flow variable streamflow. Conceptually, we extracted exemplars of specific dynamic patterns, attributing descriptive terms for means of systematisation. Metrics, primarily taken from streamflow literature, were subsequently adapted to groundwater and assigned to the described patterns for means of quantification. In this study, we focused on the particularities of groundwater as a state variable. Furthermore, we investigated the descriptive skill of individual metrics as well as their usefulness for groundwater hydrographs. The ensemble of categorized metrics result in a framework, which can be used to describe and quantify groundwater dynamics. It is a promising tool for the setup of a successful similarity classification framework for groundwater hydrographs. However, the overabundance of metrics available calls for a systematic redundancy analysis of the metrics, which we describe in a second study (Heudorfer et al., 2017). Heudorfer, B., Haaf, E., Barthel, R., Stahl, K., 2017. A framework for quantification of groundwater dynamics - redundancy and transferability of hydro(geo-)logical metrics. EGU General Assembly 2017, Vienna, Austria.

The Field-Laboratory for CO2 Storage 'CO2SINK

NASA Astrophysics Data System (ADS)

Würdemann, Hilke; Möller, Fabian; Kühn, Michael; Borm, Günter; Schilling, Frank R.

2010-05-01

The first European onshore geological CO2 storage project in a saline aquifer CO2SINK is designed as a field size experiment to better understand in situ storage processes and to test various monitoring techniques. This EU project is run by 18 partners from universities, research institutes and industry out of 9 European countries (www.co2sink.org). The CO2 is injected into Upper Triassic sandstones (Stuttgart Formation) of a double-anticline at a depth of 650 m. The Stuttgart Formation represents a flu vial environment comprised of sandstone channels and silty to muddy deposits. The anticline forms a classical multibarrier system: The first caprock is a playa type mudstone of the Weser and Arnstadt formations directly overlying the Stuttgart formation. Laboratory tests revealed permeabilities in a µDarcy-range. The second main caprock is a tertiary clay, the so-called Rupelton. To determine the maximum injection pressure modified leak-off tests (without fracturing the caprock) were performed resulting in values around 120 bar. Due to safety standards the pressure threshold is set to 82 bar until more experience on the reservoir behaviour is available. The sealing property of the secondary cap rock is well known from decades of natural gas storage operations at the testing site and was the basis for the permission to operate the CO2 storage by the mining authority. Undisturbed, initial reservoir conditions are 35 °C and 62 bar. The initial reservoir fluid is highly saline with about 235 g/l total dissolved solids primarily composed of sodium chloride with notable amounts of calcium chloride. The initial pH value is 6.6. Hydraulic tests as well as laboratory tests revealed a permeability between 50 and 100 mDarcy for the sand channels of the storage formation. Within twenty months of storage operation, about 30,000 t of CO2 have been injected. Spreading of the CO2 plume is monitored by a broad range of geophysical techniques. The injection well and the two observation wells are equipped with 'smart casing technology' containing a Distributed Temperature Sensing (DTS) and electrodes for Electrical Resistivity Tomography (ERT) behind casing, facing the rocks. The geophysical monitoring includes crosshole seismic experiments, Vertical Seismic Profiling (VSP) and Moving Source Profiling (MSP), star seismic experiments and 4-D seismics. Gas membrane sensors (GMS) monitored the arrival of CO2 at the observation wells: CO2 arrived after injection of about 500 t of CO2.at the first well. Arrival in the second well was 9 months after start of injection, having injected an amount of about 11,000 t. Prior to CO2, the arrival of the gas tracers nitrogen and krypton was observed. Pressure and temperature logs showed a supercritical state of the CO2 in all three wells at depth of the storage formation after arrival of CO2. Downhole samples of the brine showed changes in the fluid composition and the activity of biocenosis due CO2 exposure (Morozova et al., EGU General Assembly 2010). Numerical models are benchmarked via the monitoring results indicating a sufficient match for the arrival at the first observation well. First results of ERT measurements indicate an anisotopic flow of CO2 coinciding with the 'on-time' arrival of CO2 at the first well and the late arrival at the second well. Time lapse crosshole seismics showed no considerable change in seismic velocity between the two observation wells within the first two repeats after injection of 660 t and 1,700 t of CO2, respectively. However, after injection of 18,000 t CO2 all time-lapse surveys showed a clearly observable signature of the CO2 propagating in the Stuttgart formation. In May 2010 results from twenty months of operation and monitoring the storage operation will be presented. Morozova, D., Zettlitzer, M.., Vieth A., Würdemann, H., (2010). Microbial community response to the CO2 injection and storage in the saline aquifer, Ketzin, Germany. European Geosciences Union (EGU) General Assembly. Vienna.

76 FR 21035 - General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... Manufacturing, Formerly Known as General Motors Corporation, Shreveport Assembly Plant, Including On-Site Leased... General Motors Corporation, Shreveport Assembly Plant, including on-site leased workers from Aerotek and..., Shreveport Assembly Plant. The Department has determined that these workers were sufficiently under the...

40 CFR Appendix A to Part 97 - Final Section 126 Rule: EGU Allocations, 2004-2007

Code of Federal Regulations, 2012 CFR

2012-07-01

... VA POSSUM POINT 3804 4 528 VA POSSUM POINT 3804 5 322 VA POTOMAC RIVER 3788 1 203 VA POTOMAC RIVER 3788 2 139 VA POTOMAC RIVER 3788 3 232 VA POTOMAC RIVER 3788 4 223 VA POTOMAC RIVER 3788 5 222 VA SEI...

40 CFR Appendix A to Part 97 - Final Section 126 Rule: EGU Allocations, 2004-2007

Code of Federal Regulations, 2013 CFR

2013-07-01

... VA POSSUM POINT 3804 4 528 VA POSSUM POINT 3804 5 322 VA POTOMAC RIVER 3788 1 203 VA POTOMAC RIVER 3788 2 139 VA POTOMAC RIVER 3788 3 232 VA POTOMAC RIVER 3788 4 223 VA POTOMAC RIVER 3788 5 222 VA SEI...

40 CFR Appendix A to Part 97 - Final Section 126 Rule: EGU Allocations, 2004-2007

Code of Federal Regulations, 2014 CFR

2014-07-01

... VA POSSUM POINT 3804 4 528 VA POSSUM POINT 3804 5 322 VA POTOMAC RIVER 3788 1 203 VA POTOMAC RIVER 3788 2 139 VA POTOMAC RIVER 3788 3 232 VA POTOMAC RIVER 3788 4 223 VA POTOMAC RIVER 3788 5 222 VA SEI...

40 CFR 63.7575 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... having the primary purpose of recovering thermal energy in the form of steam or hot water. Controlled... the energy assessment. Electric utility steam generating unit (EGU) means a fossil fuel-fired... for sale. A fossil fuel-fired unit that cogenerates steam and electricity and supplies more than one...

40 CFR 63.7575 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... having the primary purpose of recovering thermal energy in the form of steam or hot water. Controlled... the energy assessment. Electric utility steam generating unit (EGU) means a fossil fuel-fired... for sale. A fossil fuel-fired unit that cogenerates steam and electricity and supplies more than one...

Eastern Regional Technical Advisory Committee (ERTAC) Electricity Generating Unit (EGU) Emission Projection Tool (2015 EIC)

EPA Pesticide Factsheets

Class content will include examples of how the Tool maybe applied to calculate the impacts of various air pollution control regulations (for example, the Mercury and Air Toxics Rule) on future year activity as well as NOx, SO2, and CO2 emissions.

77 FR 40639 - General Motors Vehicle Manufacturing Formerly Known as General Motors Corporation Shreveport...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... Manufacturing Formerly Known as General Motors Corporation Shreveport Assembly Plant Including On-Site Leased..., Shreveport Assembly Plant, including on-site leased workers from Aerotek and Kelly Services, Shreveport..., Shreveport Assembly Plant. The Department has determined that these workers were sufficiently under the...

The Ratu River Expedition - A Case Study in Successful Outreach Using Film and Social Media

NASA Astrophysics Data System (ADS)

Kerlow, Isaac

2016-04-01

The Ratu River Expedition is a 25-minute film about earthquakes in Nepal made for a general audience and for a Nepalese audience in particular. The movie explains basic facts about seismic activity in the Himalaya region and also basic preparedness concepts. It showcases the scientific research of the Structural Geology group at the Earth Observatory of Singapore in collaboration with the Department of Mines and Geology, Nepal. A social media campaign was developed to bring the movie to a large Nepalese audience, and the Nepali-subtitled version of the movie yielded over 79,000 post Likes in a Facebook outreach campaign. This presentation reviews the development, production, and distribution of this highly successful natural hazards documentary with scientific depth but designed for a mainstream audience. The full movie is being shown at EGU's Geo-Cinema 2016. http://raturiver.com/

Relating the microscopic rules in coalescence-fragmentation models to the cluster-size distribution

NASA Astrophysics Data System (ADS)

Ruszczycki, B.; Burnett, B.; Zhao, Z.; Johnson, N. F.

2009-11-01

Coalescence-fragmentation problems are now of great interest across the physical, biological, and social sciences. They are typically studied from the perspective of rate equations, at the heart of which are the rules used for coalescence and fragmentation. Here we discuss how changes in these microscopic rules affect the macroscopic cluster-size distribution which emerges from the solution to the rate equation. Our analysis elucidates the crucial role that the fragmentation rule can play in such dynamical grouping models. We focus our discussion on two well-known models whose fragmentation rules lie at opposite extremes. In particular, we provide a range of generalizations and new analytic results for the well-known model of social group formation developed by Eguíluz and Zimmermann, [Phys. Rev. Lett. 85, 5659 (2000)]. We develop analytic perturbation treatments of this original model, and extend the analytic analysis to the treatment of growing and declining populations.

Visualizing landscape hydrology as a means of education - The water cycle in a box

NASA Astrophysics Data System (ADS)

Lehr, Christian; Rauneker, Philipp; Fahle, Marcus; Hohenbrink, Tobias; Böttcher, Steven; Natkhin, Marco; Thomas, Björn; Dannowski, Ralf; Schwien, Bernd; Lischeid, Gunnar

2016-04-01

We used an aquarium to construct a physical model of the water cycle. The model can be used to visualize the movement of the water through the landscape from precipitation and infiltration via surface and subsurface flow to discharge into the sea. The model consists of two aquifers that are divided by a loamy aquitard. The 'geological' setting enables us to establish confining groundwater conditions and to demonstrate the functioning of artesian wells. Furthermore, small experiments with colored water as tracer can be performed to identify flow paths below the ground, simulate water supply problems like pollution of drinking water wells from inflowing contaminated groundwater or changes in subsurface flow direction due to changes in the predominant pressure gradients. Hydrological basics such as the connectivity of streams, lakes and the surrounding groundwater or the dependency of groundwater flow velocity from different substrates can directly be visualized. We used the model as an instructive tool in education and for public relations. We presented the model to different audiences from primary school pupils to laymen, students of hydrology up to university professors. The model was presented to the scientific community as part of the "Face of the Earth" exhibition at the EGU general assembly 2014. Independent of the antecedent knowledge of the audience, the predominant reactions were very positive. The model often acted as icebreaker to get a conversation on hydrological topics started. Because of the great interest, we prepared video material and a photo documentation on 1) the construction of the model and 2) the visualization of steady and dynamic hydrological situations. The videos will be published soon under creative common license and the collected material will be made accessible online. Accompanying documents will address professionals in hydrology as well as non-experts. In the PICO session, we will present details about the construction of the model and its main features. Further, short videos of specific processes and experiments will be shown.

An approach for classification of hydrogeological systems at the regional scale based on groundwater hydrographs

NASA Astrophysics Data System (ADS)

Haaf, Ezra; Barthel, Roland

2016-04-01

When assessing hydrogeological conditions at the regional scale, the analyst is often confronted with uncertainty of structures, inputs and processes while having to base inference on scarce and patchy data. Haaf and Barthel (2015) proposed a concept for handling this predicament by developing a groundwater systems classification framework, where information is transferred from similar, but well-explored and better understood to poorly described systems. The concept is based on the central hypothesis that similar systems react similarly to the same inputs and vice versa. It is conceptually related to PUB (Prediction in ungauged basins) where organization of systems and processes by quantitative methods is intended and used to improve understanding and prediction. Furthermore, using the framework it is expected that regional conceptual and numerical models can be checked or enriched by ensemble generated data from neighborhood-based estimators. In a first step, groundwater hydrographs from a large dataset in Southern Germany are compared in an effort to identify structural similarity in groundwater dynamics. A number of approaches to group hydrographs, mostly based on a similarity measure - which have previously only been used in local-scale studies, can be found in the literature. These are tested alongside different global feature extraction techniques. The resulting classifications are then compared to a visual "expert assessment"-based classification which serves as a reference. A ranking of the classification methods is carried out and differences shown. Selected groups from the classifications are related to geological descriptors. Here we present the most promising results from a comparison of classifications based on series correlation, different series distances and series features, such as the coefficients of the discrete Fourier transform and the intrinsic mode functions of empirical mode decomposition. Additionally, we show examples of classes corresponding to geological descriptors. Haaf, E., Barthel, R., 2015. Methods for assessing hydrogeological similarity and for classification of groundwater systems on the regional scale, EGU General Assembly 2015, Vienna, Austria.

A Hydraulic Stress Measurement System for Deep Borehole Investigations

NASA Astrophysics Data System (ADS)

Ask, Maria; Ask, Daniel; Cornet, Francois; Nilsson, Tommy

2017-04-01

Luleå University of Technology (LTU) is developing and building a wire-line system for hydraulic rock stress measurements, with funding from the Swedish Research Council and Luleå University of Technology. In this project, LTU is collaborating with University of Strasbourg and Geosigma AB. The stress state influences drilling and drillability, as well as rock mass stability and permeability. Therefore, knowledge about the state of in-situ stress (stress magnitudes, and orientations) and its spatial variation with depth is essential for many underground rock engineering projects, for example for underground storage of hazardous material (e.g. nuclear waste, carbon dioxide), deep geothermal exploration, and underground infrastructure (e.g. tunneling, hydropower dams). The system is designed to conduct hydraulic stress testing in slim boreholes. There are three types of test methods: (1) hydraulic fracturing, (2) sleeve fracturing and (3) hydraulic testing of pre-existing fractures. These are robust methods for determining in situ stresses from boreholes. Integration of the three methods allows determination of the three-dimensional stress tensor and its spatial variation with depth in a scientific unambiguously way. The stress system is composed of a downhole and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions (N=76 mm, H=96 mm, and P=122 mm), (3) Resistivity imager maps the orientation of tested fracture; (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. At EGU General Assembly 2017, we would like to present this new and unique stress measurement system and some initial test results from a 1200 m long borehole in crystalline rock.

How to choose methods for lake greenhouse gas flux measurements?

NASA Astrophysics Data System (ADS)

Bastviken, David

2017-04-01

Lake greenhouse gas (GHG) fluxes are increasingly recognized as important for lake ecosystems as well as for large scale carbon and GHG budgets. However, many of our flux estimates are uncertain and it can be discussed if the presently available data is representative for the systems studied or not. Data are also very limited for some important flux pathways. Hence, many ongoing efforts try to better constrain fluxes and understand flux regulation. A fundamental challenge towards improved knowledge and when starting new studies is what methods to choose. A variety of approaches to measure aquatic GHG exchange is used and data from different methods and methodological approaches have often been treated as equally valid to create large datasets for extrapolations and syntheses. However, data from different approaches may cover different flux pathways or spatio-temporal domains and are thus not always comparable. Method inter-comparisons and critical method evaluations addressing these issues are rare. Emerging efforts to organize systematic multi-lake monitoring networks for GHG fluxes leads to method choices that may set the foundation for decades of data generation and therefore require fundamental evaluation of different approaches. The method choices do not only regard the equipment but also for example consideration of overall measurement design and field approaches, relevant spatial and temporal resolution for different flux components, and accessory variables to measure. In addition, consideration of how to design monitoring approaches being affordable, suitable for widespread (global) use, and comparable across regions is needed. Inspired by discussions with Prof. Dr. Cristian Blodau during the EGU General Assembly 2016, this presentation aims to (1) illustrate fundamental pros and cons for a number of common methods, (2) show how common methodological approaches originally adapted for other environments can be improved for lake flux measurements, (3) suggest how consideration of spatio-temporal dimensions of flux variability can lead to more optimized approaches, and (4) highlight possibilities of efficient ways forward including low-cost technologies that has potential for world-wide use.

Leading Wave Amplitude of a Tsunami

NASA Astrophysics Data System (ADS)

Kanoglu, U.

2015-12-01

Okal and Synolakis (EGU General Assembly 2015, Geophysical Research Abstracts-Vol. 17-7622) recently discussed that why the maximum amplitude of a tsunami might not occur for the first wave. Okal and Synolakis list observations from 2011 Japan tsunami, which reached to Papeete, Tahiti with a fourth wave being largest and 72 min later after the first wave; 1960 Chilean tsunami reached Hilo, Hawaii with a maximum wave arriving 1 hour later with a height of 5m, first wave being only 1.2m. Largest later waves is a problem not only for local authorities both in terms of warning to the public and rescue efforts but also mislead the public thinking that it is safe to return shoreline or evacuated site after arrival of the first wave. Okal and Synolakis considered Hammack's (1972, Ph.D. Dissertation, Calif. Inst. Tech., 261 pp., Pasadena) linear dispersive analytical solution with a tsunami generation through an uplifting of a circular plug on the ocean floor. They performed parametric study for the radius of the plug and the depth of the ocean since these are the independent scaling lengths in the problem. They identified transition distance, as the second wave being larger, regarding the parameters of the problem. Here, we extend their analysis to an initial wave field with a finite crest length and, in addition, to a most common tsunami initial wave form of N-wave as presented by Tadepalli and Synolakis (1994, Proc. R. Soc. A: Math. Phys. Eng. Sci., 445, 99-112). We compare our results with non-dispersive linear shallow water wave results as presented by Kanoglu et al. (2013, Proc. R. Soc. A: Math. Phys. Eng. Sci., 469, 20130015), investigating focusing feature. We discuss the results both in terms of leading wave amplitude and tsunami focusing. Acknowledgment: The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 603839 (Project ASTARTE - Assessment, Strategy and Risk Reduction for Tsunamis in Europe)

Preliminary investigation on the deformation rates of the Nazimiye Fault (Eastern Turkey)

NASA Astrophysics Data System (ADS)

Sançar, Taylan

2016-04-01

The complex tectonic setting of the eastern Mediterranean is mainly shaped by the interaction between three major plates, Eurasian, African, and Arabian plates, with additional involvement from the smaller Anatolian Scholle. The internal deformation of the Anatolian Scholle is mainly accommodated along NW-striking dextral and NE-striking sinistral faults, which are explained by the Prandtl Cell model by Şengör (1979). Although some of these strike-slip faults, such as Tuzgölü, Ecemiş and Malatya-Ovacık faults, have long been documented, the Nazimiye Fault (NF) is only presented in very recent studies (Kara et al. 2013; Emre et al. 2012). The aim of the study is to understand intra-plate deformation of the Anatolian Scholle, by studying the morphotectonic structures along the NF. The study area located close to the eastern boundary of Anatolia, roughly on the wedge that is delimited by the North and East Anatolian shear zones and the Malatya-Ovacık Fault Zone. After the preliminary remote sensing analyses and field observations, I mapped the locations of the different terrace treads along the Pülümür River, which is strongly deflected by the activity of the NF. This dextral strike-slip fault, is not only characterized with the deformation of the Pülümür River, but also it shows many beheaded streams, pressure ridges, hot springs and travertines along its course. I sampled one of the alluvial fans for cosmogenic dating at the eastern section of the NF, where about 20 m of dextral offset was measured at the margins of the incised stream. Moreover, additional sampling was performed from different terrace levels along the Pülümür River, in order not only to estimate the min. horizontal rate, but also to quantify the vertical deformation. Moreover, I applied morphometric indices to understand the tectonic control on the local morphology along the NF. Transverse Topographic Symmetry Factor was used to show the relative degree of tectonic activity along the fault-bounded mountain fronts. In addition to that I also extracted hypsometric curves, hypsometric integrals and stream length gradient index to understand the relationship between characteristics of the drainage basins and tectonic activity. As preliminary results, I conclude that the southern segment of the NF is tectonically quiescent, whereas the deformation is mainly accommodated on the northern branch. References Emre, Ö., Duman, T.Y., Kondo, H., Olgun, Ş., Özalp, S., Elmacı, H., 2012. 1:250.000 Ölçekli Türkiye Diri Fay Haritası Serisi, Erzincan (NJ37-3) Paftası, Seri No:44, Maden Tetkik ve Arama Genel Müdürlüǧü, Ankara-Türkiye. Kara, K., Sançar, T., Zabci, C., 2013. Morphologic and Morphotectonic Characteristics of the Nazimiye Fault Zone, Eastern Turkey. EGU2013-8105, EGU General Assembly Vienna, Austria. Şengör, A.M.C., 1979. The North Anatolian transform fault; its age, offset and tectonic significance. Journal of the Geological Society of London 136, Part 3, 269-282.

Biohydrology - it has its uses

NASA Astrophysics Data System (ADS)

Lichner, L.; Hallett, P. D.; Drongová, Z.; Czachor, H.; Kovacik, L.

2012-04-01

The term biohydrology has existed for years but resurged during the 2005 EGU General Assembly. Various sessions covered topics relevant to biological and hydrological interactions, so the convenors and participants (Dekker, Doerr, Hallett, Lichner, Ritsema and Sir) proposed to draw together the scientists by developing a unified conference. Biohydrology was viewed as a simple, descriptive and catchy title. These efforts resulted in the conferences Biohydrology 2006 in Prague and Biohydrology 2009 in Bratislava. Biologists and soil-water scientists were united under one banner, rather than being stuck like sticks in unsaturated (vadose zone), saturated (hydrogeology) or large-scale (hydrology) mud. Yes, much of the work could be badged under a number of other discipline names, as was evident from the publication of high quality papers from the conferences in special issues of Biologia (61, 2006, Suppl. 19, and 64, 2009, 3), Ecohydrology (3, 2010, 4), and the Journal of Hydrology and Hydromechanics (58, 2010, 3). Other works presented at the conferences appeared in the Journal of Hydrology, microbiology journals, numerous soil science journals and in specialist journals dealing in turfgrass research and wildfires. The entire premise of EGU meetings is to bring together a range of geoscience disciplines under one roof so that the boundaries that separate them can be broken. Biohydrology serves to break the boundary between soil-water physics (at whatever scale and level of saturation) and biology. By coining a not so new name, we are not redefining old research, but providing a vehicle to bridge disciplines to gain scientific advances that would not be possible by working alone. This interdisciplinary approach to the interactions between living organisms and hydrology will be presented on an example of aeolian sand dunes on Borska nizina lowland (Slovakia). They cover about 410 km2 and show all the stages of succession, from biological soil crust to mixed forest. Vegetation retards infiltration by the help of soil water repellency. In hot and dry spells, the soil covered with vegetation had the water drop penetration time up to 10000-times that of pure sand. Sorptivity and hydraulic conductivity in these areas were only 4% and 2% those of pure sand, respectively. Moreover, water applied on all planted and/or crusted surfaces was redistributed to the series of micro-catchments, which acted as runon and runoff zones and flowed As a result, preferential flow was revealed during dye tracer experiments. The original stages of succession were studied in the laboratory, where coccal and filamentous green algae were grown on sterile pure sand as monoalgal and bialgal crusts. The growth of Klebsormidium subtile crust resulted in an increase in water drop penetration time of the dried crusts up to 14-times that of the pure sand and a decrease in the water sorptivity and hydraulic conductivity up to 10% and 9% those of the pure sand, respectively. A greater impact of K. subtile on the shifts in hydraulic behaviour can result in better prevention of its pools of nutrients from leaching, and thus, in easier vegetation establishment and development on the crust.

Quantifying the impact of lithology upon the mechanical properties of rock

NASA Astrophysics Data System (ADS)

Weatherley, Dion

2013-04-01

The physical characteristics of rock, its lithology, undoubtedly influences its deformation under natural or engineering loads. Mineral texture, micro-damage, joints, bedding planes, inclusions, unconformities and faults are all postulated to alter the mechanical response of rock on different scales and under different stressing conditions. Whilst laboratory studies have elucidated some aspects of the relationship between lithology and mechanical properties, these small-scale results are difficult to extrapolate to lithospheric scales. To augment laboratory-derived knowledge, physics-based numerical modelling is a promising avenue [3]. Bonded particle models implemented using the Discrete Element Method (DEM [1]) are a practical numerical laboratory to investigate the interplay between lithology and the mechanical response of rock specimens [4]. Numerical rock specimens are represented as an assembly of indivisible spherical particles connected to nearest neighbours via brittle-elastic beams which impart forces and moments upon one-another as particles move relative to each other. By applying boundary forces and solving Newton's Laws for each particle, elastic deformation and brittle failure may be simulated [2]. Each beam interaction is defined by four model parameters: Young's modulus, Poisson's ratio, cohesive strength and internal friction angle. Beam interactions in different subvolumes of the specimen are assigned different parameters to model different rock types or mineral assemblages. Micro-cracks, joints, unconformities and faults are geometrically incorporated by fitting particles to either side of triangulated surfaces [5]. The utility of this modelling approach is verified by reproducing analytical results from fracture mechanics (Griffith crack propagation and wing-crack formation) and results of controlled laboratory investigations. To quantify the impact of particular lithologic structures on mechanical response, a range of control experiments are conducted in which samples with differing structure are subjected to triaxial compression tests to measure the mechanical response. By systematically varying the geometry and statistical properties of the structures, insight is obtained on how such structures influence mechanical response. The goal of this research is to develop constitutive relations for the mechanical response of rock that are functions of measurable lithological characteristics. Such relations will find utility in tectonic stress field reconstructions, seismic hazard assessment and underground mine engineering. References [1] Cundall, P.A, and Strack, O.D.L (1979), A discrete numerical model for granular assemblies, Geotechnique, 29, No. 1, 47-65. [2] Potyondy, D.O, and Cundall, P.A (2004), A bonded particle model for rock, International Journal of Rock Mechanics and Mining Science, 41, No. 8, 1329-1364. [3] Schopfer, M.P.J, Abe, S., Childs, C. and Walsh, J.J. (2009), The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials: Insights from DEM modelling, Int. J. Rock Mech. Min. Sci., 46, 250-261. [4] Weatherley, D. (2011), Investigations on the role of microstructure in brittle failure using discrete element simulations, Geophysical Research Abstracts, 13, EGU2011-9476. [5] Weatherley, D. and Ayton, T. (2012), Numerical investigations on the role of micro-cracks in determining the compressive and tensile strength of rocks, Geophysical Research Abstracts, 14, EGU2012-8294.

Proceedings of the Twenty-Eighth General Assembly Beijing 2012

NASA Astrophysics Data System (ADS)

Montmerle, Thierry

2015-09-01

Preface; 1. Inaugural ceremony; 2. Twenty-eighth General Assembly business sessions; 3. Closing ceremony; 4. Resolutions; 5. Report of Executive Committee, 2009-2012; 6. Reports on Division, Commission, and Working Group meetings; 7. Statutes, bye-laws, and working rules; 8. New members admitted at the General Assembly; 9. Divisions and their Commissions.

NAQFC Reports

Science.gov Websites

Forecasts Recent NCEP NAM-CMAQ AQF Reports EPA CMAQ Bibliography 2016-2017 Huang, J., et al., 2017: Wea Stajner, I., et al., 2016: EGU: NAQFC Overview Huang, J., et al. 2016: AMS: Bias Correction Stajner, I, et . Huang, J., et al.,(2015): CMAS, Testing of two bias correction approaches for reducing biases of

40 CFR 63.9983 - Are any EGUs not subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., recirculated flue gases or exhaust gases from other sources (such as stationary gas turbines, internal... subject to this subpart. (a) Any unit designated as a stationary combustion turbine, other than an... utility steam generating unit that is not a coal- or oil-fired EGU and combusts natural gas for more than...

40 CFR 63.9983 - Are any EGUs not subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., recirculated flue gases or exhaust gases from other sources (such as stationary gas turbines, internal... subject to this subpart. (a) Any unit designated as a stationary combustion turbine, other than an... utility steam generating unit that is not a coal- or oil-fired EGU and combusts natural gas for more than...

40 CFR 63.9983 - Are any EGUs not subject to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., recirculated flue gases or exhaust gases from other sources (such as stationary gas turbines, internal... subject to this subpart. (a) Any unit designated as a stationary combustion turbine, other than an... utility steam generating unit that is not a coal- or oil-fired EGU and combusts natural gas for more than...

40 CFR 63.11237 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... controlled flame combustion in which water is heated to recover thermal energy in the form of steam and/or... this definition. Coal subcategory includes any boiler that burns any solid fossil fuel and no more than... included in this definition. Electric utility steam generating unit (EGU) means a fossil fuel-fired...

40 CFR 63.11237 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... controlled flame combustion in which water is heated to recover thermal energy in the form of steam and/or... this definition. Coal subcategory includes any boiler that burns any solid fossil fuel and no more than... included in this definition. Electric utility steam generating unit (EGU) means a fossil fuel-fired...

Analysis of NOx Budget Trading Program Units Brought into the CAIR NOx Ozone Season Trading Program

EPA Pesticide Factsheets

EPA analyzed the effect of having the large non-EGU units in the NBP and the CAIR NOX ozone season trading program and evaluated whether or not emissions from this group of units were reduced as a result of their inclusion in those trading programs.

Production of co-polymers of polyhydroxyalkanoates by regulating the hydrolysis of biowastes.

PubMed

Kumar, Prasun; Ray, Subhasree; Kalia, Vipin C

2016-01-01

Production of polyhydroxyalkanoate (PHA) co-polymers by Bacillus spp. was studied by feeding defined volatile fatty acids (VFAs) obtained through controlled hydrolysis of various wastes. Eleven mixed hydrolytic cultures (MHCs) each containing 6 strains could generate VFA from slurries of (2% total solids): pea-shells (PS), potato peels (PP), apple pomace (AP) and onion peels (OP). PS hydrolysates (obtained with MHC2 and MHC5) inoculated with Bacillus cereus EGU43 and Bacillus thuringiensis EGU45 produced co-polymers of PHA at the rate of 15-60mg/L with a 3HV content of 1%w/w. An enhancement in PHA yield of 3.66-fold, i.e. 205-550mg/L with 3HV content up to 7.5%(w/w) was observed upon addition of OP hydrolysate and 1% glucose (w/v) to PS hydrolysates. This is the first demonstration, where PHA co-polymer composition, under non-axenic conditions, could be controlled by customizing VFA profile of the hydrolysate by the addition of different biowastes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Drive piston assembly for a valve actuator assembly

DOEpatents

Sun, Zongxuan

2010-02-23

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

77 FR 71323 - Reconsideration of Certain New Source and Startup/Shutdown Issues: National Emission Standards...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-30

... units designed for the coal >= 8300 Btu/lb (non- low rank virgin coal) subcategory. Some petitioners...-fired EGU would have the opportunity to design the primary PM control device to meet the new source... the opportunity to design the primary PM control device to meet the new source emission limit, we can...

40 CFR 63.10032 - What records must I keep?

Code of Federal Regulations, 2013 CFR

2013-07-01

... must keep records of the type(s) and amount(s) of fuel used during each startup or shutdown. (j) If you... whether the deviation occurred during a period of startup, shutdown, or malfunction or during another... must keep records of monthly fuel use by each EGU, including the type(s) of fuel and amount(s) used. (2...

40 CFR 63.10032 - What records must I keep?

Code of Federal Regulations, 2014 CFR

2014-07-01

... must keep records of the type(s) and amount(s) of fuel used during each startup or shutdown. (j) If you... whether the deviation occurred during a period of startup, shutdown, or malfunction or during another... must keep records of monthly fuel use by each EGU, including the type(s) of fuel and amount(s) used. (2...

40 CFR 63.10032 - What records must I keep?

Code of Federal Regulations, 2012 CFR

2012-07-01

... must keep records of the type(s) and amount(s) of fuel used during each startup or shutdown. (j) If you... whether the deviation occurred during a period of startup, shutdown, or malfunction or during another... must keep records of monthly fuel use by each EGU, including the type(s) of fuel and amount(s) used. (2...

77 FR 3681 - Approval and Promulgation of Air Quality Implementation Plans; Minnesota; Regional Haze

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... approach in the BART Guidelines in making a BART determination for a fossil fuel-fired EGU with total... ammonia (NH 3 ), and volatile organic compound (VOCs). Fine particle precursors react in the atmosphere to... standards, low sulfur fuel, and non-road mobile source control programs. The fourth step is to determine...

40 CFR 63.9991 - What emission limitations, work practice standards, and operating limits must I meet?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Emission Limitations and Work... this subpart only if your EGU: (1) Has a system using wet or dry flue gas desulfurization technology... operate the wet or dry flue gas desulfurization technology installed on the unit consistent with § 63...

40 CFR 63.9991 - What emission limitations, work practice standards, and operating limits must I meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Emission Limitations and Work... this subpart only if your EGU: (1) Has a system using wet or dry flue gas desulfurization technology... operate the wet or dry flue gas desulfurization technology installed on the unit consistent with § 63...

40 CFR 63.9991 - What emission limitations, work practice standards, and operating limits must I meet?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Emission Limitations and Work... this subpart only if your EGU: (1) Has a system using wet or dry flue gas desulfurization technology... operate the wet or dry flue gas desulfurization technology installed on the unit consistent with § 63...

General view of a fully assembled Solid Rocket Booster sitting ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of a fully assembled Solid Rocket Booster sitting atop the Mobile Launch Platform in the Vehicle Assembly Building at Kennedy Space Center - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view taken inside of an assembly bay of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view taken inside of an assembly bay of the Vehicle Assembly Building at the Kennedy Space Center. This view shows the Orbiter Discovery being lowered into position in preparation for being mated to the External Tank/Solid Rocket Booster assembly on the Mobile Launch Platform. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

49 CFR 572.181 - General description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... assembly Drawing number Head Assembly 175-1000 Neck Assembly Test/Cert 175-2000 Neck Bracket Including..., dated February 2008. (c) Weights of body segments (head, neck, upper and lower torso, arms and upper and... the convenience of the user, the added and revised text is set forth as follows: § 572.181 General...

Chapter II: Twenty Eighth General Assembly Business Sessions

NASA Astrophysics Data System (ADS)

Williams, Robert

2015-08-01

The President of the IAU, Prof. Robert Williams, welcomed the delegates and members to this first business session of the General Assembly. The President invited the General Secretary, Dr. Ian Corbett, to start the business session.

TECHNICAL SUPPORT DOCUMENT: NATIONAL-SCALE MERCURY RISK ASSESSMENT SUPPORTING THE APPROPRIATE AND NECESSARY FINDING FOR COAL- AND OIL-FIRED ELECTRIC GENERATING UNITS

EPA Science Inventory

The EPA has completed a national-scale risk assessment for mercury to inform the appropriate and necessary determination for electric utility steam generating unites in the United States (U.S. EGU's), persuant to Section 112(n)(1)(A) of the Clean Air Act. This document describes...

40 CFR Appendix B to Part 97 - Final Section 126 Rule: Non-EGU Allocations, 2004-2007

Code of Federal Regulations, 2010 CFR

2010-07-01

... Lawrence SOUTH POINT ETHANOL 0744000009 B007 107 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B044 47 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B046 34 OH Lucas SUN REFINING... SHENANGO IRON & COKE WORKS 0050 006 18 PA Allegheny SHENANGO IRON & COKE WORKS 0050 009 15 PA Delaware SUN...

40 CFR Appendix B to Part 97 - Final Section 126 Rule: Non-EGU Allocations, 2004-2007

Code of Federal Regulations, 2013 CFR

2013-07-01

... Lawrence SOUTH POINT ETHANOL 0744000009 B007 107 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B044 47 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B046 34 OH Lucas SUN REFINING... SHENANGO IRON & COKE WORKS 0050 006 18 PA Allegheny SHENANGO IRON & COKE WORKS 0050 009 15 PA Delaware SUN...

40 CFR Appendix B to Part 97 - Final Section 126 Rule: Non-EGU Allocations, 2004-2007

Code of Federal Regulations, 2012 CFR

2012-07-01

... Lawrence SOUTH POINT ETHANOL 0744000009 B007 107 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B044 47 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B046 34 OH Lucas SUN REFINING... SHENANGO IRON & COKE WORKS 0050 006 18 PA Allegheny SHENANGO IRON & COKE WORKS 0050 009 15 PA Delaware SUN...

40 CFR Appendix B to Part 97 - Final Section 126 Rule: Non-EGU Allocations, 2004-2007

Code of Federal Regulations, 2014 CFR

2014-07-01

... Lawrence SOUTH POINT ETHANOL 0744000009 B007 107 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B044 47 OH Lucas SUN REFINING & MARKETING CO, TOLEDO REF 0448010246 B046 34 OH Lucas SUN REFINING... SHENANGO IRON & COKE WORKS 0050 006 18 PA Allegheny SHENANGO IRON & COKE WORKS 0050 009 15 PA Delaware SUN...

40 CFR 63.7491 - Are any boilers or process heaters not subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... generating unit (EGU) covered by subpart UUUUU of this part. (b) A recovery boiler or furnace covered by... vessels. This does not include units that provide heat or steam to a process at a research and development... the average annual heat input during any 3 consecutive calendar years to the boiler or process heater...

40 CFR 63.7491 - Are any boilers or process heaters not subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... generating unit (EGU) covered by subpart UUUUU of this part. (b) A recovery boiler or furnace covered by... vessels. This does not include units that provide heat or steam to a process at a research and development... the average annual heat input during any 3 consecutive calendar years to the boiler or process heater...

40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Final Section 126 Rule: Trading Budget C Appendix C to Part 97 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...

40 CFR Appendix A to Part 97 - Final Section 126 Rule: EGU Allocations, 2004-2007

Code of Federal Regulations, 2011 CFR

2011-07-01

... NC L V SUTTON 2713 3 717 NC L V SUTTON 2713 CT2B 2 NC LEE 2709 1 129 NC LEE 2709 2 142 NC LEE 2709 3 414 NC LEE 2709 CT4 1 NC LINCOLN 7277 1 33 NC LINCOLN 7277 10 31 NC LINCOLN 7277 11 33 NC LINCOLN 7277...

Structure Assembly by a Heterogeneous Team of Robots Using State Estimation, Generalized Joints, and Mobile Parallel Manipulators

NASA Technical Reports Server (NTRS)

Komendera, Erik E.; Adhikari, Shaurav; Glassner, Samantha; Kishen, Ashwin; Quartaro, Amy

2017-01-01

Autonomous robotic assembly by mobile field robots has seen significant advances in recent decades, yet practicality remains elusive. Identified challenges include better use of state estimation to and reasoning with uncertainty, spreading out tasks to specialized robots, and implementing representative joining methods. This paper proposes replacing 1) self-correcting mechanical linkages with generalized joints for improved applicability, 2) assembly serial manipulators with parallel manipulators for higher precision and stability, and 3) all-in-one robots with a heterogeneous team of specialized robots for agent simplicity. This paper then describes a general assembly algorithm utilizing state estimation. Finally, these concepts are tested in the context of solar array assembly, requiring a team of robots to assemble, bond, and deploy a set of solar panel mockups to a backbone truss to an accuracy not built into the parts. This paper presents the results of these tests.

Virginia Higher Education: The 1976 General Assembly. A Summary of Legislation and Appropriations.

ERIC Educational Resources Information Center

Virginia State Council of Higher Education, Richmond.

Higher education bills and appropriations to higher education approved by the 1976 Virginia Assembly are summarized. This session was the first in which the Council of Higher Education, operating under the expanded responsibilities granted to it by the General Assembly in 1974, provided formal recommendations on institutional budget requests to…

EXTENSION ADMINISTRATION AND STATE LEGISLATIVE PROCESS--A CASE STUDY OF THE 71ST MISSOURI GENERAL ASSEMBLY.

ERIC Educational Resources Information Center

KYD, STIRLING

TO GAIN UNDERSTANDING OF MISSOURI'S LEGISLATIVE PROCESS AND AID ADMINISTRATORS OF THE EXTENSION DIVISION, THE AUTHOR INVESTIGATED THE 71ST GENERAL ASSEMBLY. HE READ PUBLICATIONS, INTERVIEWED LOBBYISTS, AND CONDUCTED OPEN ENDED DEPTH INTERVIEWS WITH LEGISLATORS SELECTED TO COMPRISE THE LEADERSHIP OF THE ASSEMBLY. HIS DISSERTATION PRESENTS THE…

49 CFR 572.15 - General description.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...

49 CFR 572.15 - General description.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...

49 CFR 572.15 - General description.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...

49 CFR 572.15 - General description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...

Evaluating potential chlorinated methanes degradation mechanisms and treatments in interception trenches filled with concrete-based construction wastes

NASA Astrophysics Data System (ADS)

Rodríguez-Fernandez, Diana; Torrentó, Clara; Rosell, Mònica; Audí-Miró, Carme; Soler, Albert

2014-05-01

A complex mixture of chlorinated organic compounds is located in an unconfined carbonated bedrock aquifer with low permeability in a former industrial area next to Barcelona (NE Spain). The site exhibited an especially high complexity due to the presence of multiple contaminant sources, wide variety of pollutants (mainly chlorinated ethenes but also chlorinated methanes) and unknown system of fractures (Palau et al., 2014). Interception trenches were installed in the place of the removed pollution sources and were filled with construction wastes with the aim of retaining and treating the accumulated contaminated recharge water before reaching the aquifer. Recycled concrete-based aggregates from a construction and demolition waste recycling plant were used to maintain alkaline conditions in the water accumulated in the trenches (pH 11.6±0.3) and thus induce chloroform (CF) degradation by alkaline hydrolysis. An efficacy of around 30-40% CF degradation in the interception trenches was calculated from the significant and reproducible CF carbon isotopic fractionation (-53±3o obtained in batch experiments (Torrentó et al., 2014). Surprisingly, although hydrolysis of carbon tetrachloride (CT) is extremely slow, a significant CT carbon isotopic enrichment was also observed in the trenches. The laboratory experiments verified the low capability of concrete to hydrolyze the CT and showed the high adsorption of CT on the concrete particles (73% after 50 days) with invariability in its δ13C values. Therefore, the significant CT isotopic fractionation observed in the interception trenches could point out the occurrence of other degradation processes distinct than alkaline hydrolysis. Geochemical speciation modelling using the code PHREEQC showed that water collected at the trenches is supersaturated with respect to several iron oxy-hydroxides and therefore, CT degradation processes related to these iron minerals cannot be discarded. In addition, the combination of alkaline conditions in the trenches with in situ chemical oxidation (ISCO), which would be able to remove the rest of the accompanying pollutants, is proposed and merits evaluation. Preliminary batch experiments were performed to evaluate the feasibility of different chemical oxidation reactions (permanganate, persulphate, hydrogen peroxide and Fenton) on the complex contaminated recharge water which were, in general, more effective for degrading the chlorinated ethenes than for the chlorinated methanes (Torrentó et al. EGU 2012). Therefore, this study seeks to improve the understanding of CF and CT degradation mechanisms/processes that are going on in the interception trenches as well as to select between the two most effective chemical oxidation remediation treatments (persulphate and permanganate) taking into account their efficiency respect the chlorinated methanes removal, the generated acute toxicity and the applicability of the carbon isotopic fractionation as an indicator of the effectiveness of the future in situ remediation. Additionally, ongoing batch experiments are expected to elucidate if CT is undergoing abiotic reductive dechlorination by Fe-bearing minerals such as hydrophobic green rust (Ayala-Luis et al., 2012) which transform CT into non-chlorinated substances such as formic acid and carbon monoxide. This unstable iron compound might be formed in the interception trenches during chloride induced corrosion of iron mineral phases present in the concrete-based construction wastes (Sagoe-Crentsil and Glasser, 1993). The role of other minerals like iron oxy-hydroxides, carbonates or sulphides cannot be discarded at all. The potential of δ13C values to assess the efficiency of this abiotic CT degradation reaction will be also evaluated. References Ayala-Luis, K.; Cooper, N.; Bender C. and Hansen. H. (2012) Efficient dechlorination of carbon tetrachloride by hydrophobic green rust intercaled with dodecanoate anions. Environmental Science & Technology 46, 3390-3397. Palau, J.; Marchesi, M.: Chambon, J.: Aravena, R.; Canals, A.; Binning, P. J., Bjerg P. L.; Otero, N.; Soler, A. (2014) Multi-isotope (carbon and chlorine) analysis for fingerprinting and site characterization at a fractured bedrock aquifer contaminated by chlorinated ethenes. Science of the Total Environment 475, 61-70. Sagoe-Crentsil, K.K.; Glasser, F.P. (1993) 'Green Rust', Iron Solubility and the Role of Chloride in the Corrosion of Steel at High pH,' Cement and Concrete Research, 23(4), 785-91. Torrentó, C., Audí-Miró, C., Marchesi, M., Otero, N. and Soler, A. (2012) Comparison of four oxidation processes for the treatment of water contaminated with a mixture of chlorinated volatile organic compounds. EGU General Assembly 2012. Vienna. Geophysical Research Abstracts, 14: EGU2012-11310. Torrentó, C.; Audí-Miró, C.; Bordeleau, G.; Marchesi, M.; Rosell, M.; Otero, N.; Soler, A. (2014) The use of alkaline hydrolysis as a novel strategy for chloroform remediation: the feasibility of using construction wastes and evaluation of carbon isotopic fractionation. Environmental Science & Technology, Just Accepted Manuscript (DOI: 10.1021/es403838t)

On the impact of RN network coverage on event selection and data fusion during the 2009 National Data Centres Preparedness Exercise

NASA Astrophysics Data System (ADS)

Becker, Andreas; Krysta, Monika; Auer, Matthias; Brachet, Nicolas; Ceranna, Lars; Gestermann, Nicolai; Nikkinen, Mika; Zähringer, Matthias

2010-05-01

The so-called National Data Centres (NDCs) to the Provisional Technical Secretariat of the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty (CTBT) Organization are in charge to provide for the final judgement on the CTBT relevance of explosion events encountered in the PTS International Monitoring System (IMS). The latter is a 321 stations network set-up by the PTS (to date completion level: 80%) in order to globally monitor for occurrence of CTBT relevant seismo-acoustic and radionuclide signals. In doing so, NDCs learn about any seismo-acoustic or radionuclide event by active retrieval or subscription to corresponding event lists and products provided by the International Data Centre (IDC) to the PTS. To prepare for their instrumental role in case of a CTBT relevant event, the NDCs jointly conduct annually so-called NDC Preparedness Exercises. In 2009, NDC Germany was in charge to lead the exercise and to choose a seismo-acoustic event out of the list of events provided by the PTS (Gestermann et al., EGU2010-13067). The novelty in this procedure was that also the infrasound readings and the monitoring coverage of existing (certified) radionuclide stations into the area of consideration were taken into account during the event selection process (Coyne et al., EGU2010-12660). Hence, the event finally chosen and examined took place near Kara-Zhyra mine in Eastern Kazakhstan on 28 November 2009 around 07:20:31 UTC (Event-ID 5727516). NDC Austria performed forward atmospheric transport modelling in order to predict RN measurements that should have occurred in the radionuclide IMS. In doing so the fictitious case that there would have been a release of radionuclides taking place at the same location (Wotawa and Schraik, 2010; EGU2010-4907) in a strength being typical for a non-contained nuclear explosion is examined. The stations indicated should then be analysed for their actual radionuclide readings in order to confirm the non nuclear character of the event (negative testing scenario). Obviously only stations already set up and ‘certified' of being capable of full operations, could be recruited for this. In doing so an issue was encountered with regard to the availability of RN data at certified RN stations. Despite the support to the event selection, PTS also supplied so-called data fusion bulletins that apply a method to collocate the RN and seismo-acoustic source location results (Krysta and Becker, EGU2010-10218). In this paper we demonstrate the impact of gaps in network coverage that appear due to the aforementioned reduced RN data availability for source location capacities. Network coverage assessments for the set of certified stations and the reduced set of stations actually sending data shall therefore be discussed. Furthermore, the capabilities and constraints of the data fusion method to make up for the RN source location accuracy losses related to reduced RN data availability at certified stations shall be presented.

Fire occurrence prediction in the Mediterranean: Application to Southern France

NASA Astrophysics Data System (ADS)

Papakosta, Panagiota; Öster, Jan; Scherb, Anke; Straub, Daniel

2013-04-01

The areas that extend in the Mediterranean basin have a long fire history. The climatic conditions of wet winters and long hot drying summers support seasonal fire events, mainly ignited by humans. Extended land fragmentation hinders fire spread, but seasonal winds (e.g. Mistral in South France or Meltemia in Greece) can drive fire events to become uncontrollable fires with severe impacts to humans and the environment [1]. Prediction models in these areas should incorporate both natural and anthropogenic factors. Several indices have been developed worldwide to express fire weather conditions. The Canadian Fire Weather Index (FWI) is currently adapted by many countries in Europe due to the easily observable input weather parameters (temperature, wind speed, relative humidity, precipitation) and the easy-to-implement algorithms of the Canadian formulation describing fuel moisture relations [2],[3]. Human influence can be expressed directly by human presence (e.g. population density) or indirectly by proxy indicators (e.g. street density [4], land cover type). The random nature of fire occurrences and the uncertainties associated with the influencing factors motivate probabilistic prediction models. The aim of this study is to develop a prediction model of fire occurrence probability under natural and anthropogenic influence in Southern France and to compare it with earlier developed predictions in other Mediterranean areas [5]. Fire occurrence is modeled as a Poisson process. Two interpolation methods (Kriging and Inverse Distance Weighting) are used to interpolate daily weather observations from weather stations to a 1 km² spatial grid and their results are compared. Poisson regression estimates the parameters of the model and the resulting daily predictions are provided in terms of maps displaying fire occurrence rates. The model is applied to the regions Provence-Alpes-Côtes D'Azur und Languedoc-Roussillon in the South of France. Weather data are obtained from the German and French Weather Services (Deutscher Wetterdienst and Météo-France). Historical fire events are taken from Prométhée database. Time series 2000-2010 are used as learning data and data from 2011 is used as the validation data. The resulting model can support real-time fire risk estimation for improved allocation of firefighting resources and planning of other mitigation actions. [1] Keeley, J.E.; Bond, W.J.; Bradstock, R.A.; Pausas, J.G.; Rundel, P.W. (2012): Fire in Mediterranean ecosystems: ecology, evolution and management. Cambridge University Press, New York, USA, pp.515 [2] Lawson, B.D.; Armitage, O.B. (2008): Weather Guide for the Canadian Forest Fire Danger Rating System. Natural Resources Canada, Canadian Forest Service, Northern Forestry Centre, Edmonton, Alberta, Canada. [3] Van Wagner, C.E.; Pickett, T.L. (1985): Equations and FORTRAN Program for the Canadian Forest Fire Weather Index System. Forestry Technical Report 33. Canadian Forestry Service, Government of Canada, Ottawa, Ontario, Canada [4] Syphard, A.D.; Radeloff, V.C.; Keuler, N.S.; Taylor, R.S.; Hawbaker, T.J.; Stewart, S.I.; Clayton, M.K. (2008): Predicting spatial patterns of fire on a southern California landscape. International Journal of Wildland Fire, 17, pp.602-613 [5] Papakosta, P.; Klein, F.; König, S.; Straub, D. (2012): Linking spatio-temporal data to the Fire Weather Index to estimate the probability of wildfire in the Mediterranean. Geophysical Research Abstracts, Vol.14, EGU2012-12737, EGU General Assembly 2012

Tsunami hazard assessment for the island of Rhodes, Greece

NASA Astrophysics Data System (ADS)

Pagnoni, Gianluca; Armigliato, Alberto; Zaniboni, Filippo; Tinti, Stefano

2013-04-01

The island of Rhodes is part of the Dodecanese archipelago, and is one of the many islands that are found in the Aegean Sea. The tectonics of the Rhodes area is rather complex, involving both strike-slip and dip-slip (mainly thrust) processes. Tsunami catalogues (e.g. Papadopulos et al, 2007) show the relative high frequency of occurrence of tsunamis in this area, some also destructive, in particular between the coasts of Rhodes and Turkey. In this part of the island is located the town of Rhodes, the capital and also the largest and most populated city. Rhodes is historically famous for the Colossus of Rhodes, collapsed following an earthquake, and nowadays is a popular tourist destination. This work is focused on the hazard assessment evaluation with research performed in the frame of the European project NearToWarn. The hazard is assessed by using the worst-credible case scenario, a method introduced and used to study local tsunami hazard in coastal towns like Catania, Italy, and Alexandria, Egypt (Tinti et al., 2012). The tsunami sources chosen for building scenarios are three: two located in the sea area in front of the Turkish coasts where the events are more frequent represent local sources and were selected in the frame of the European project NearToWarn, while one provides the case of a distant source. The first source is taken from the paper Ebeling et al. (2012) and modified by UNIBO and models the earthquake and small tsunami occurred on 25th April 1957.The second source is a landslide and is derived from the TRANSFER Project "Database of Tsunamigenic Non-Seismic Sources" and coincides with the so-called "Northern Rhodes Slide", possibly responsible for the 24th March 2002 tsunami. The last source is the fault that is located close to the island of Crete believed to be responsible for the tsunami event of 1303 that was reported to have caused damage in the city of Rhodes. The simulations are carried out using the finite difference code UBO-TSUFD that solves the Navier Stokes equations in shallow water approximation. To cover the entire basin two nested grids (a coarse one with 30 arc sec resolution and a finer one with 200 m resolution) are used, constructed on bathymetry data provided by the TRANSFER database. The results, as fields of highest wave elevation, maximum flood, maximum speed, arrival times and synthetic tide-gauges, are provided and discussed both individually (i.e. separately for each source) as well as in the form of a single, aggregate result, as required by the worst-case scenario technique. References Ebeling, C.W., Okal., E.A., Kalligeris, N., Synolakis, C.E.: Modern seismological reassessment and tsunami simulation of historical Hellenic Arc earthquakes. Tectonophysics, 530-531, 225-239, 2012. Papadopoulos, G. A., Daskalaki, E., Fokaefs, A., and Giraleas, N.: Tsunami hazards in the Eastern Mediterranean: strong earthquakes and tsunamis in the East Hellenic Arc and Trench system, Nat. Hazards Earth Syst. Sci., 7, 57-64, doi:10.5194/nhess-7-57-2007, 2007. Tinti S., Pagnoni G., Armigliato A., and Tonini R.: Tsunami inundation scenarios and tsunami vulnerability assessment forthe town of Alexandria, Egypt, Geophysical Research Abstracts Vol. 14, EGU2012-10325, 2012, EGU General Assembly 2012.

General view of the Space Shuttle Main Engine (SSME) assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-Pressure Fuel Turbopump (LPFTP) on the upper left of the engine assembly, the LPFTP Discharge Duct looping around the assembly, the Gimbal Bearing on the top center of the assembly, the Electrical Interface Panel sits just below the Gimbal Bearing and the Low-Pressure Oxidizer Turbopump is mounted on the top right of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...

Scalable Spin-Qubit Circuits with Quantum Dots

DTIC Science & Technology

2006-12-31

Kondo entanglement” Phys. Rev. B 75, 035332 (2007). 14. W. A. Coish, Vitaly N . Golovach, J. Carlos Egues, Daniel Loss, “Measurement, control, and...Spin-orbit interaction in symmetric wells and cycloidal orbits without magnetic fields”, cond-mat/0607218. 16. Mircea Trif, Vitaly N . Golovach, Daniel...195-199 (2006); Supplementary Information. 22. Vitaly N . Golovach, Massoud Borhani, Daniel Loss, “Electric Dipole Induced Spin Resonance in Quantum

40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...

40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...

40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 22 2012-07-01 2012-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...

48 CFR 239.7409 - Special assembly.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Special assembly. 239.7409... Services 239.7409 Special assembly. (a) Special assembly is the designing, manufacturing, arranging... general use equipment. (b) Special assembly rates and charges shall be based on estimated costs. The...

48 CFR 239.7409 - Special assembly.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Special assembly. 239.7409... Services 239.7409 Special assembly. (a) Special assembly is the designing, manufacturing, arranging... general use equipment. (b) Special assembly rates and charges shall be based on estimated costs. The...

48 CFR 239.7409 - Special assembly.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Special assembly. 239.7409... Services 239.7409 Special assembly. (a) Special assembly is the designing, manufacturing, arranging... general use equipment. (b) Special assembly rates and charges shall be based on estimated costs. The...

48 CFR 239.7409 - Special assembly.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Special assembly. 239.7409... Services 239.7409 Special assembly. (a) Special assembly is the designing, manufacturing, arranging... general use equipment. (b) Special assembly rates and charges shall be based on estimated costs. The...

48 CFR 239.7409 - Special assembly.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Special assembly. 239.7409... Services 239.7409 Special assembly. (a) Special assembly is the designing, manufacturing, arranging... general use equipment. (b) Special assembly rates and charges shall be based on estimated costs. The...

Introduction to EGU session "Lunar Science and Exploration Towards Moon Village"

NASA Astrophysics Data System (ADS)

Foing, Bernard

2017-04-01

The EGU PS2.2 session "Lunar Science and Exploration" Towards Moon Village" will address: - Recent lunar results: geochemistry, geophysics in the context of open planetary science and exploration - Synthesis of results from SMART-1, Kaguya, Chang'e 1, 2 and 3, Chandrayaan-1, LCROSS, LADEE, Lunar Reconnaissance Orbiter and, Artemis and GRAIL - Goals and Status of missions under preparation: orbiters, Luna-Glob, Google Lunar X Prize, Luna Resurs polar lander, SLIM, Chandrayaan2, Chang'E 4 & 5, Lunar Resource Prospector, Future landers, Lunar sample return missions - Precursor missions, instruments and investigations for landers, rovers, sample return, and human cis-lunar activities and human lunar surface sorties - Preparation for International Lunar Decade: databases, instruments, missions, terrestrial field campaigns, support studies - ILEWG and Global Exploration roadmaps towards a global robotic/human Moon village - Strategic Knowledge Gaps, and key science Goals relevant to Lunar Global Exploration Lunar science and exploration are developing further with new and exciting missions being developed by China, the US, Japan, India, Russia, Korea and Europe, and with new stakeholders. The Moon Village is an open concept proposed by ESA DG with the goal of a sustainable human and robotic presence on the lunar surface as an ensemble where multiple users can carry out multiple activities. Multiple goals of the Moon Village include planetary science, life sciences, astronomy, fundamental research, resources utilisation, human spaceflight, peaceful cooperation, economical development, inspiration, training and capacity building. ESA director general has revitalized and enhanced the original concept of MoonVillage discussed in the last decade. Space exploration builds on international collaboration. COSPAR and its ILEWG International Lunar Exploration Working Group (created in 1994) have fostered collaboration between lunar missions [4-8]. A flotilla of lunar orbiters has flown in the last international lunar decade (SMART-1, Kaguya, Chang'Eal1 &2, Chandrayaan-1, LCROSS, LRO, GRAIL, LADEE). Chinese Chang'E 3 lander and Yutu rover, and upcoming 2017 other landers from 2017 (GLXP, Chang'E 4 & 5, SLIM, Luna , LRP) will constitute a Robotic Village on the Moon. A number of MoonVillage talks and/or interactive jam sessions have been conducted at International workshops and symposia 2016. Moon Village Workshops were held at ESA centres: they were held with senior experts as well as Young ESA professionals to discuss general topics and specific issues ( habitat design, technology, science and precursor missions; public and stakeholder engagement) . Many workshops were complemented with ILEWG EuroMoonMars simulation campaigns. Moon Village Workshops or Jam sessions were also conducted at international symposia or in collaboration with specific universities or institutes. The PS2.2 session will include invited and contributed talks as well as a panel discussion and interactive posters with short oral introduction. Acknowledgements We thank Prof J. Woerner (ESA DG) for energizing the concept of MoonVillage. We thank co-conveners of MoonVillage Workshops and ILEWG EuroMoonMars field campaigns in 2016 (including C. Jonglez, V.Guinet, M.Monnerie, A. Kleinschneider, A. Kapoglou, A. Kolodziejczyk, M. Harasymczuk, I. Schlacht, C. Heinicke, D. Esser, M.Grulich, T. Siruguet, H.Vos, M.Mirino, D.Sokolsky, J.Blamont) and participants to these events. We thank A.Cowley, C. Haigneré, P. Messina, G. Ortega, S.Cristoforetti, ESA colleagues involved in MoonVillage related activities. We thank colleagues from ILEWG, Young Lunar Explorers, the International Lunar Decade Group, the Moon Village Association and Moon Village Support Groups and "MoonVillagers" at large. [1] Jan Wörner, Driving #MoonVillage http://www.iafastro.org/events/iac/iac-2015/plenaryprogramme/the-moon-a-continent-and-a-gateway-for-ourfuture/ (IAC 2015, Jerusalem); [2]http://www.iafastro.org/events/iac/iac2016/globalnetworking-forum/making-the-moon-village-and-marsjourney-accessible-and-affordable-for-all/ (IAC 2016) ; [3] B. Foing et al , Highlights from Moon Village Workshop, held at ESTEC in December 2015, http://www.hou.usra.edu/meetings/lpsc2016/pdf/2719.pdf, http://www.hou.usra.edu/meetings/lpsc2016/pdf/2798.pdf [4] P. Ehrenfreund et al. "Toward a Global Space Exploration Program: A Stepping Stone Approach" (Advances in Space Research, 49, n°1, January 2012), prepared by COSPAR Panel on Exploration (PEX) [5] http://www.lpi.usra.edu/leag/GER_2011.pdf; [6] http://sci.esa.int/ilewg/47170-gluc-iceum11- beijing-2010lunar-declaration/; [7] http://www.lpi.usra.edu/meetings/leagilewg2008/ [8] http://sci.esa.int/ilewg/41506-iceum9-sorrento- 2007-lunar-declaration/ [9] National Research Council (2007), The Scientific Context for Exploration of the Moon [10] P. Ehrenfreund , B.H. Foing, A. Cellino Editors, The Moon and Near Earth Objects), Advances in Space Research, Volume 37, Issue 1, pp 1-192, 2006 [11] http://sci.esa.int/ilewg/38863-iceum8-beijing- 2006declaration/ [12] W. Huntress, D. Stetson, R. Farquhar, J. Zimmerman, B. Clark, W. O'Neil, R. Bourke& B. Foing,'The next steps in exploring deep space - A cosmic study by the IAA', Acta Astronautica, Vol 58, Issues 6-7, 2006, p302-377 [13]http://sci.esa.int/ilewg/38178-iceum7-toronto-2005-declaration/ [14] H. Balsiger et al. Eds, International Lunar Workshop, 1994 May 31-June 3, Beatenberg, Switzerland. Proceedings. Ed. European Space Agency, 1994. ESA-SP-1170 [15] R.M. Bonnet et al, 'Mission to the Moon, Europe's Priorities for Scientific Exploration and Utilisation of the Moon', European Space Agency, ESA SP-1150, June 1992 [16] http://www.iafastro.org/events/iaf-spring-meetings/spring-meetings-2016/ [17] https://www.spacesymposium.org/ [18] http://www.egu2016.eu/ http://meetingorganizer.copernicus.org/EGU2016/session/20378 [19] https://els2016.arc.nasa.gov/ [20] https://nesf2016.arc.nasa.gov/ [21] https://www.cospar-assembly.org/abstractcd/COSPAR-16/ [22] https://www.iac2016.org/, [23] http://www.hou.usra.edu/meetings/leag2016/presentations/ [24] http://newworlds2016.space/ [25] http://www.stx.ox.ac.uk/happ/events/history-moon [26] https://www.cranfield.ac.uk/events/events-2016/manufacturing-2075#

Analysis of large space structures assembly: Man/machine assembly analysis

NASA Technical Reports Server (NTRS)

1983-01-01

Procedures for analyzing large space structures assembly via three primary modes: manual, remote and automated are outlined. Data bases on each of the assembly modes and a general data base on the shuttle capabilities to support structures assembly are presented. Task element times and structure assembly component costs are given to provide a basis for determining the comparative economics of assembly alternatives. The lessons learned from simulations of space structures assembly are detailed.

19. Launch Area, general view of Missile Assembly Building and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Launch Area, general view of Missile Assembly Building and Generator Building VIEW SOUTHWEST - NIKE Missile Battery PR-79, Launch Area, East Windsor Road south of State Route 101, Foster, Providence County, RI

General view taken in the transfer aisle of the Vehicle ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view taken in the transfer aisle of the Vehicle Assembly Building at the Kennedy Space Center looking at the Orbiter Discovery hoisted, rotated to a vertical position and moving to an assembly bay to be mated to the External Tank/Solid Rocket Booster assembly. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view of the Aft Skirt Assembly and the Aft ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Skirt Assembly and the Aft Solid Rocket Motor Segment mated together in the Vehicle Assembly Building at Kennedy Space Center and being prepared for mounting onto the Mobile Launch Platform and mating with the other Solid Rocket Booster segments. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

How Alexander von Humboldt's life story can inspire innovative soil research in developing countries

NASA Astrophysics Data System (ADS)

Bouma, Johan

2017-09-01

The pioneering vision of Alexander von Humboldt of science and society of the early 1800s is still highly relevant today. His open mind and urge to make many measurements characterizing the interconnected web of life are crucial ingredients as we now face the worldwide challenge of the UN Sustainable Development Goals. Case studies in the Philippines, Vietnam, Kenya, Niger, and Costa Rica demonstrate, in Alexander's spirit, interaction with stakeholders and attention to unique local conditions, applying modern measurement and modeling methods and allowing inter- and transdisciplinary research approaches. But relations between science and society are increasingly problematic, partly as a result of the information revolution and post-truth, fact-free thinking. Overly regulated and financially restricted scientific communities in so-called developed countries may stifle intellectual creativity. Researchers in developing countries are urged to leapfrog these problems in the spirit of Alexander von Humboldt as they further develop their scientific communities. Six suggestions to the science community are made with particular attention to soil science. (The Humboldt lecture, presented by the 2017 recipient of the Alexander von Humboldt lecture, Johan Bouma, can be accessed at http://client.cntv.at/egu2017/ml1.)

Hard fight for scientific truth in EGU

NASA Astrophysics Data System (ADS)

Ostrihansky, Lubor

2014-05-01

Arthur Holmes and Harry Hess established a dogma about the mantle convection which for many decades is accepted as the motive force of plates in spite that it contradicts to reasonable sense and any observations. If a group of scientists tries to come out against it, always meet a strong resistance. Examples of such resistance manifest objections posted by specialists in geodynamics of EGU. Scientific public is convinced that tidal forces of semidiurnal and diurnal periods cannot move plates because triggering of earthquakes by the stress of these amplitudes give statistically insignificant results confirmed by many reports for more than 100 years. However the tidal forces act on 10 km Earth's rotation flattening and by periodic Earth's deformations resulting in earth's rotation variations giving strong forces energetically equivalent to energy of large earthquakes. Oceanic lithosphere older than 180 M.Y. drops down to the mantle by gravity and at that movement the released space facilitates the plate movement by tides. Hotspots firmly anchored in mantle show by tracks an exact movement of plates. Not Polfluchtkraft but Äquatorkraft force the tides create, which can move the large continent (for example Gondwana) far from equator as far ad the pole, where after decay the Antarctica remains being out of tidal forces actions.

49 CFR 393.45 - Brake tubing and hoses; hose assemblies and end fittings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Brake tubing and hoses; hose assemblies and end... assemblies and end fittings. (a) General construction requirements for tubing and hoses, assemblies, and end fittings. All brake tubing and hoses, brake hose assemblies, and brake hose end fittings must meet the...

49 CFR 393.45 - Brake tubing and hoses; hose assemblies and end fittings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Brake tubing and hoses; hose assemblies and end... assemblies and end fittings. (a) General construction requirements for tubing and hoses, assemblies, and end fittings. All brake tubing and hoses, brake hose assemblies, and brake hose end fittings must meet the...

49 CFR 393.45 - Brake tubing and hoses; hose assemblies and end fittings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Brake tubing and hoses; hose assemblies and end... assemblies and end fittings. (a) General construction requirements for tubing and hoses, assemblies, and end fittings. All brake tubing and hoses, brake hose assemblies, and brake hose end fittings must meet the...

Minimal Absent Words in Four Human Genome Assemblies

PubMed Central

Garcia, Sara P.; Pinho, Armando J.

2011-01-01

Minimal absent words have been computed in genomes of organisms from all domains of life. Here, we aim to contribute to the catalogue of human genomic variation by investigating the variation in number and content of minimal absent words within a species, using four human genome assemblies. We compare the reference human genome GRCh37 assembly, the HuRef assembly of the genome of Craig Venter, the NA12878 assembly from cell line GM12878, and the YH assembly of the genome of a Han Chinese individual. We find the variation in number and content of minimal absent words between assemblies more significant for large and very large minimal absent words, where the biases of sequencing and assembly methodologies become more pronounced. Moreover, we find generally greater similarity between the human genome assemblies sequenced with capillary-based technologies (GRCh37 and HuRef) than between the human genome assemblies sequenced with massively parallel technologies (NA12878 and YH). Finally, as expected, we find the overall variation in number and content of minimal absent words within a species to be generally smaller than the variation between species. PMID:22220210

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

A spectroscopic transfer standard for accurate atmospheric CO measurements

NASA Astrophysics Data System (ADS)

Nwaboh, Javis A.; Li, Gang; Serdyukov, Anton; Werhahn, Olav; Ebert, Volker

2016-04-01

Atmospheric carbon monoxide (CO) is a precursor of essential climate variables and has an indirect effect for enhancing global warming. Accurate and reliable measurements of atmospheric CO concentration are becoming indispensable. WMO-GAW reports states a compatibility goal of ±2 ppb for atmospheric CO concentration measurements. Therefore, the EMRP-HIGHGAS (European metrology research program - high-impact greenhouse gases) project aims at developing spectroscopic transfer standards for CO concentration measurements to meet this goal. A spectroscopic transfer standard would provide results that are directly traceable to the SI, can be very useful for calibration of devices operating in the field, and could complement classical gas standards in the field where calibration gas mixtures in bottles often are not accurate, available or stable enough [1][2]. Here, we present our new direct tunable diode laser absorption spectroscopy (dTDLAS) sensor capable of performing absolute ("calibration free") CO concentration measurements, and being operated as a spectroscopic transfer standard. To achieve the compatibility goal stated by WMO for CO concentration measurements and ensure the traceability of the final concentration results, traceable spectral line data especially line intensities with appropriate uncertainties are needed. Therefore, we utilize our new high-resolution Fourier-transform infrared (FTIR) spectroscopy CO line data for the 2-0 band, with significantly reduced uncertainties, for the dTDLAS data evaluation. Further, we demonstrate the capability of our sensor for atmospheric CO measurements, discuss uncertainty calculation following the guide to the expression of uncertainty in measurement (GUM) principles and show that CO concentrations derived using the sensor, based on the TILSAM (traceable infrared laser spectroscopic amount fraction measurement) method, are in excellent agreement with gravimetric values. Acknowledgement Parts of this work have been carried out within the European Metrology Research Programme (EMRP) ENV52 project-HIGHGAS (Metrology for high-impact greenhouse gases). The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union. References [1] EMRP project ENV52-HIGHGAS (Metrology for high-impact greenhouse gases), available at: http://www.euramet.org/. [2] J. Nwaboh, A. Manninen, J. Mohn, J. C. Petersen, O. Werhahn, and V.Ebert, European Geosciences Union General Assembly 2015, EGU2015-13542, 2015, Vienna Austria

Synergistic degradation of chlorinated hydrocarbons with microorganisms and zero valent iron

NASA Astrophysics Data System (ADS)

Schöftner, Philipp; Summer, Dorothea; Leitner, Simon; Watzinger, Andrea; Wimmer, Bernhard; Reichenauer, Thomas

2016-04-01

Sites contaminated with chlorinated hydrocarbons (CHC) are located mainly within build-up regions. Therefore in most cases only in-situ technologies without excavation of soil material can be used for remediation. This project examines a novel in-situ remediation method, in which the biotic degradation via bacteria is combined with abiotic degradation via zero-valent iron particles (ZVI). ZVI particles are injected into the aquifer where CHC-molecules are reductively dechlorinated. However Fe0 is also oxidized by reaction with water leading to generation of H2 without any CHC degradation. To achieve biotic degradation often strictly anaerobic strains of the bacteria Dehalococcoides are used. These bacteria can dechlorinate CHC by utilizing H2. By combining these processes the H2, produced during the anaerobic corrosion of Fe0, could be used by bacteria for further CHC degradation. Therefore the amount of used Fe0 and as a consequence also remediation costs could be reduced. Additionally the continuous supply of H2 could make the bacterial degradation more controllable. Different Fe0 particles (nano- and micro-scale) were tested for their perchloroethene (PCE) degradation rate and H2 production rate in microcosms. PCE-degradation rate by different bacterial cultures was investigated in the same microcosm system. In course of these experiments the 13C enrichment factors of the PCE degradation of the different particles and cultures were determined to enable the differentiation of biotic and abiotic degradation. Preliminary results showed, that the nano-scale particles reacted faster with PCE and water than their micro-scaled counterparts. The PCE degradation via micro-scaled particles lead to 13C enrichment factors in the range of -3,6 ‰ ± 0,6 to -9,5 ‰ ± 0,2. With one of the examined bacterial cultures a fast reduction of PCE to ethene was observed. Although PCE and TCE were completely degraded by this culture the metabolites DCE and VC could still be detected. Further microcosm experiments will be implemented by the time of the EGU General Assembly 2016. In the framework of these experiments other bacterial cultures and ZVI particles as well as the combination of biotic and abiotic dehalogenation will be investigated.

ESONET LIDO Demonstration Mission: the Iberian Margin node.

NASA Astrophysics Data System (ADS)

Embriaco, Davide; André, Michel; Zitellini, Nevio; Esonet Lido Demonstration Mission Team

2010-05-01

The Gulf of Cadiz is one of two the test sites chosen for the demonstration of the ESONET - LIDO Demonstration Mission (DM) [1], which will establish a first nucleus of regional network of multidisciplinary sea floor observatories. The Gulf of Cadiz is a highly populated area, characterized by tsunamigenic sources, which caused the devastating earthquake and tsunamis that struck Lisbon in 1755. The seismic activity is concentrated along a belt going from this region to the Azores and the main tsunamigenic tectonic sources are located near the coastline. In the framework of the EU - NEAREST project [2] the GEOSTAR deep ocean bottom multi-parametric observatory was deployed for a one year mission off cape Saint Vincent at about 3200 m depth. GEOSTAR was equipped with a set of oceanographic, seismic and geophysical sensors and with a new tsunami detector prototype. In November 2009 the GEOSTAR abyssal station equipped with the tsunami prototype was redeployed at the same site on behalf of NEAREST and ESONET - LIDO DM. The system is able to communicate from the ocean bottom to the land station via an acoustic and satellite link. The abyssal station is designed both for long term geophysical and oceanographic observation and for tsunami early warning purpose. The tsunami detection is performed by two different algorithms: a new real time dedicated tsunami detection algorithm which analyses the water pressure data, and a seismic algorithm which triggers on strong events. Examples of geophysical and oceanographic data acquired by the abyssal station during the one year mission will be shown. The development of a new acoustic antenna equipped with a stand alone and autonomous acquisition system will allow the recording of marine mammals and the evaluation of environmental noise. References [1] M. André and The ESONET LIDO Demonstration Mission Team, "Listening to the deep-ocean environment: an ESONET initiative for the real-time monitoring of geohazards and marine ambient noise", EGU General Assembly, Vienna 2-7 May 2010 [2] EU - NEAREST Project web site: http://nearest.bo.ismar.cnr.it/

A framework for quantification of groundwater dynamics - redundancy and transferability of hydro(geo-)logical metrics

NASA Astrophysics Data System (ADS)

Heudorfer, Benedikt; Haaf, Ezra; Barthel, Roland; Stahl, Kerstin

2017-04-01

A new framework for quantification of groundwater dynamics has been proposed in a companion study (Haaf et al., 2017). In this framework, a number of conceptual aspects of dynamics, such as seasonality, regularity, flashiness or inter-annual forcing, are described, which are then linked to quantitative metrics. Hereby, a large number of possible metrics are readily available from literature, such as Pardé Coefficients, Colwell's Predictability Indices or Base Flow Index. In the present work, we focus on finding multicollinearity and in consequence redundancy among the metrics representing different patterns of dynamics found in groundwater hydrographs. This is done also to verify the categories of dynamics aspects suggested by Haaf et al., 2017. To determine the optimal set of metrics we need to balance the desired minimum number of metrics and the desired maximum descriptive property of the metrics. To do this, a substantial number of candidate metrics are applied to a diverse set of groundwater hydrographs from France, Germany and Austria within the northern alpine and peri-alpine region. By applying Principle Component Analysis (PCA) to the correlation matrix of the metrics, we determine a limited number of relevant metrics that describe the majority of variation in the dataset. The resulting reduced set of metrics comprise an optimized set that can be used to describe the aspects of dynamics that were identified within the groundwater dynamics framework. For some aspects of dynamics a single significant metric could be attributed. Other aspects have a more fuzzy quality that can only be described by an ensemble of metrics and are re-evaluated. The PCA is furthermore applied to groups of groundwater hydrographs containing regimes of similar behaviour in order to explore transferability when applying the metric-based characterization framework to groups of hydrographs from diverse groundwater systems. In conclusion, we identify an optimal number of metrics, which are readily available for usage in studies on groundwater dynamics, intended to help overcome analytical limitations that exist due to the complexity of groundwater dynamics. Haaf, E., Heudorfer, B., Stahl, K., Barthel, R., 2017. A framework for quantification of groundwater dynamics - concepts and hydro(geo-)logical metrics. EGU General Assembly 2017, Vienna, Austria.

General view in the transfer aisle of the Vehicle Assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view in the transfer aisle of the Vehicle Assembly Building at Kennedy Space Center looking at one of a pair of Forward Segments of the Solid Rocket Motor of the Solid Rocket Booster awaiting hoisting and mating to the Solid Rocket Booster assembly on the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view in the transfer aisle of the Vehicle Assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view in the transfer aisle of the Vehicle Assembly Building at Kennedy Space Center looking at one of a pair of Forward Center Segments of the Solid Rocket Motor of the Solid Rocket Booster awaiting hoisting and mating to the Solid Rocket Booster assembly on the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Quantitative computational models of molecular self-assembly in systems biology

PubMed Central

Thomas, Marcus; Schwartz, Russell

2017-01-01

Molecular self-assembly is the dominant form of chemical reaction in living systems, yet efforts at systems biology modeling are only beginning to appreciate the need for and challenges to accurate quantitative modeling of self-assembly. Self-assembly reactions are essential to nearly every important process in cell and molecular biology and handling them is thus a necessary step in building comprehensive models of complex cellular systems. They present exceptional challenges, however, to standard methods for simulating complex systems. While the general systems biology world is just beginning to deal with these challenges, there is an extensive literature dealing with them for more specialized self-assembly modeling. This review will examine the challenges of self-assembly modeling, nascent efforts to deal with these challenges in the systems modeling community, and some of the solutions offered in prior work on self-assembly specifically. The review concludes with some consideration of the likely role of self-assembly in the future of complex biological system models more generally. PMID:28535149

Quantitative computational models of molecular self-assembly in systems biology.

PubMed

Thomas, Marcus; Schwartz, Russell

2017-05-23

Molecular self-assembly is the dominant form of chemical reaction in living systems, yet efforts at systems biology modeling are only beginning to appreciate the need for and challenges to accurate quantitative modeling of self-assembly. Self-assembly reactions are essential to nearly every important process in cell and molecular biology and handling them is thus a necessary step in building comprehensive models of complex cellular systems. They present exceptional challenges, however, to standard methods for simulating complex systems. While the general systems biology world is just beginning to deal with these challenges, there is an extensive literature dealing with them for more specialized self-assembly modeling. This review will examine the challenges of self-assembly modeling, nascent efforts to deal with these challenges in the systems modeling community, and some of the solutions offered in prior work on self-assembly specifically. The review concludes with some consideration of the likely role of self-assembly in the future of complex biological system models more generally.

Latching relay switch assembly

DOEpatents

Duimstra, Frederick A.

1991-01-01

A latching relay switch assembly which includes a coil section and a switch or contact section. The coil section includes at least one permanent magnet and at least one electromagnet. The respective sections are, generally, arranged in separate locations or cavities in the assembly. The switch is latched by a permanent magnet assembly and selectively switched by an overriding electromagnetic assembly.

49 CFR 572.5 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... M080—Right leg assembly SA 150 M081—Left leg assembly SA 150 M010—Head assembly SA 150 M020—Neck... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 50th Percentile Male § 572... grouped by component assemblies under the following nine headings: SA 150 M070—Right arm assembly SA 150...

OAS :: General Assembly

Science.gov Websites

General Assembly Governance H Human Development Human Rights I Indigenous Peoples Integral Development Scholarships School of Governance Science and Technology Social Development Summits of the Americas Sustainable - 2005 Quito, Ecuador - 2004 Santiago, Chile - 2003 Bridgetown, Barbados - 2002 Special Sessions Fifty

Gasoline-Engine Assembler (engine & turbine) 806.781; Internal-Combustion-Engine-Assembler (engine & turbine) 806.781; Outboard-Motor Assembler (engine & turbine) 806.781--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Analysis of Nuclear Propagation Effects Utilizing Wideband Satellite Data.

DTIC Science & Technology

1981-04-01

integrated phase spectral energy on scales shorter than - 30 km. Like the TEC, the standard deviation of phase depends on the effective thickness of...Vila, P., "Etude Experimentale de L’Anomalie lonospherique Equatoriale en Afrique en Periode de Minimum Solaire ," Annales de Geophysique, Vol. 22, No...AFRDSP AT[: OP 65 ATTN: AFRDSS 82 DEPARTMENT OF THE AIR FORCE (Continued) DEPARTMENT OF ENERGY CONTRACTORS Electronic Systems Div EG&U, Inc Air force

Becoming angular momentum density flow through nonlinear mass transfer into a gravitating spheroidal body

NASA Astrophysics Data System (ADS)

Krot, A. M.

2009-04-01

A statistical theory for a cosmological body forming based on the spheroidal body model has been proposed in the works [1]-[4]. This work studies a slowly evolving process of gravitational condensation of a spheroidal body from an infinitely distributed gas-dust substance in space. The equation for an initial evolution of mass density function of a gas-dust cloud is considered here. It is found this equation coincides completely with the analogous equation for a slowly gravitational compressed spheroidal body [5]. A conductive flow in dissipative systems was investigated by I. Prigogine in his works (see, for example, [6], [7]). As it has been found in [2], [5], there exists a conductive antidiffusion flow in a slowly compressible gravitating spheroidal body. Applying the equation of continuity to this conductive flow density we obtain a linear antidiffusion equation [5]. However, if an intensity of conductive flow density increases sharply then the linear antidiffusion equation becomes a nonlinear one. Really, it was pointed to [6] analogous linear equations of diffusion or thermal conductivity transform in nonlinear equations respectively. In this case, the equation of continuity describes a nonlinear mass flow being a source of instabilities into a gravitating spheroidal body because the gravitational compression factor G is a function of not only time but a mass density. Using integral substitution we can reduce a nonlinear antidiffusion equation to the linear antidiffusion equation relative to a new function. If the factor G can be considered as a specific angular momentum then the new function is an angular momentum density. Thus, a nonlinear momentum density flow induces a flow of angular momentum density because streamlines of moving continuous substance come close into a gravitating spheroidal body. Really, the streamline approach leads to more tight interactions of "liquid particles" that implies a superposition of their specific angular momentums. This superposition forms an antidiffusion flow of an angular momentum density into a gravitating spheroidal body. References: [1] Krot, A.M. The statistical model of gravitational interaction of particles. Achievement in Modern Radioelectronics (spec.issue"Cosmic Radiophysics", Moscow), 1996, no.8, pp. 66-81 (in Russian). [2] Krot, A.M. Statistical description of gravitational field: a new approach. Proc. SPIE's 14th Annual Intern.Symp. "AeroSense", Orlando, Florida, USA, 2000, vol.4038, pp.1318-1329. [3] Krot, A.M. The statistical model of rotating and gravitating spheroidal body with the point of view of general relativity. Proc.35th COSPAR Scientific Assembly, Paris, France, 2004, Abstract A-00162. [4] Krot, A. The statistical approach to exploring formation of Solar system. Proc.EGU General Assembly, Vienna, Austria, 2006, Geophys.Res.Abstracts, vol.8, A-00216; SRef-ID: 1607-7962/gra/. [5] Krot, A.M. A statistical approach to investigate the formation of the solar system. Chaos, Solitons and Fractals, 2008, doi:10.1016/j.chaos.2008.06.014. [6] Glansdorff, P. and Prigogine, I. Thermodynamic Theory of Structure, Stability and Fluctuations. London, 1971. [7] Nicolis, G. and Prigogine, I. Self-organization in Nonequilibrium Systems:From Dissipative Structures to Order through Fluctuation. John Willey and Sons, New York etc., 1977.

General view of the Space Shuttle Main Engine (SSME) assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-pressure Fuel Turbopump discharge Duct looping from the upper left side of the engine assembly to the lower left side of the assembly, the Low-Pressure Oxidizer Turbopump (LPOTP) is on the upper left of the assembly in this view and the LPOTP Discharge Duct loops from the upper left to upper right. The sphere in the middle right side of the assembly in this view is the POGO System Accumulator , the partial sphere to its left and slightly more toward the center of the assembly is the Heat Exchanger on the Oxidizer Preburner side of the Hot Gas Manifold, beneath that is the High-Pressure Oxidizer Turbopump (HPOTP) and the HPOTP Discharge duct loops from the pump around to the lower left of the assembly. The Pneumatic Control Assembly is in the approximate center of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

19 CFR 10.18 - Valuation of assembled articles.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

19 CFR 10.18 - Valuation of assembled articles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

19 CFR 10.18 - Valuation of assembled articles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

19 CFR 10.18 - Valuation of assembled articles.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

19 CFR 10.18 - Valuation of assembled articles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

General view of a Space Shuttle Main Engine (SSME) mounted ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of a Space Shuttle Main Engine (SSME) mounted on an SSME engine handler, taken in the SSME Processing Facility at Kennedy Space Center. The most prominent features of the engine assembly in this view are the Low-Pressure Fuel Turbopump Discharge Duct looping around the right side and underneath the assembly, the High-Pressure Fuel Turbopump located on the lower left portion of the assembly, the Engine Controller and Main Fuel Valve Hydraulic Actuator located on the upper portion of the assembly and the Low-Pressure Oxidizer Turbopump Discharge Duct at the top of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Meta assembler enhancements and generalized linkage editor

NASA Technical Reports Server (NTRS)

1979-01-01

A meta Assembler for NASA was developed. The initial development of the Meta Assembler for the SUMC was performed. The capabilities included assembly for both main and micro level programs. A period of checkout and utilization to verify the performance of the Meta Assembler was undertaken. Additional enhancements were made to the Meta Assembler which expanded the target computer family to include architectures represented by the PDP-11, MODCOMP 2, and Raytheon 706 computers.

Report to the General Assembly [of Illinois].

ERIC Educational Resources Information Center

Illinois Community Coll. Board, Springfield.

In this nine-part report to Illinois' General Assembly, the Illinois Community College Board (ICCB) reviews Board powers and duties, and systemwide goals, financial resources, student characteristics and outcomes, educational programs, training and economic development activities, programs for special populations, and current issues of importance…

The role of international institutions in the formation of international bioethical law: UNESCO and the United Nations General Assembly attempt to govern human cloning.

PubMed

Kuppuswamy, Chamundeeswari

2007-01-01

This article analyses the international governance of human reproductive cloning. Noting that bioethics is a new field of engagement for international lawyers, it recounts some of the institutional developments in bioethical law making. The role of UNESCO and the United Nations General Assembly is scrutinized and the author discusses the relative merits of the institutions' governance of human reproductive cloning. The author suggests that some international institutions and mechanisms are better suited than others for bioethical law making. The 2005 General Assembly resolution on human cloning is analysed in this context.

Dependence of Halo Bias and Kinematics on Assembly Variables

NASA Astrophysics Data System (ADS)

Xu, Xiaoju; Zheng, Zheng

2018-06-01

Using dark matter haloes identified in a large N-body simulation, we study halo assembly bias, with halo formation time, peak maximum circular velocity, concentration, and spin as the assembly variables. Instead of grouping haloes at fixed mass into different percentiles of each assembly variable, we present the joint dependence of halo bias on the values of halo mass and each assembly variable. In the plane of halo mass and one assembly variable, the joint dependence can be largely described as halo bias increasing outward from a global minimum. We find it unlikely to have a combination of halo variables to absorb all assembly bias effects. We then present the joint dependence of halo bias on two assembly variables at fixed halo mass. The gradient of halo bias does not necessarily follow the correlation direction of the two assembly variables and it varies with halo mass. Therefore in general for two correlated assembly variables one cannot be used as a proxy for the other in predicting halo assembly bias trend. Finally, halo assembly is found to affect the kinematics of haloes. Low-mass haloes formed earlier can have much higher pairwise velocity dispersion than those of massive haloes. In general, halo assembly leads to a correlation between halo bias and halo pairwise velocity distribution, with more strongly clustered haloes having higher pairwise velocity and velocity dispersion. However, the correlation is not tight, and the kinematics of haloes at fixed halo bias still depends on halo mass and assembly variables.

Long-term Field Experiments as Important Source of Knowledge - Aims of the BonaRes Data Centre

NASA Astrophysics Data System (ADS)

Grosse, Meike; Hierold, Wilfried

2017-04-01

BonaRes is short for "soil as a sustainable resource for the bioeconomy". It is funded by the German Federal Ministry of Education and Research (BMBF) under the umbrella of the National Research Strategy BioEconomy 2030. BonaRes consists of ten interdisciplinary research project consortia and the 'BonaRes - Centre for Soil Research' (see also Wollschläger et al 2016). It is one task of the BonaRes Data Centre as part of the 'BonaRes - Centre for Soil Research', to collect data and meta-data of agricultural long-term field experiments (LTFE) in Germany. The definition of LTFE in the context of BonaRes is a minimum duration of twenty years and a static design. LTFE are essential research infrastructures for agricultural sciences and soil sciences amongst other disciplines. Some LTFE run since a very long time; the start of the oldest one in Germany was 1878. Therefore, in many cases valuable time series exist. Data sets of LTFE shall be compiled and made publicly available by the BonaRes Data Centre. The public availability together with an easy access will lead to an enhanced usability of the data. This probably makes the LTFE itself more valuable through an improved visibility and may also help to maintain the LTFE. Beyond the data compilation there is the possibility for every data owner to make a data publication, which offers an additional value for the data owner after his first right of use. A first step towards a joint database is a compilation of all existing LTFE in Germany with meta information to each trial. This information is shown in an interactive web map, what is completely new in that context. Besides the exact position of the LTFE the following metadata are shown: name of the LTFE, website (if available), institution, land use category, participation in existing networks, research theme, start (and maybe end) of the trial, and research parameters. Details on the meta information will be presented in the speech. Literature Wollschläger, U; Helming, K.; Heinrich, U.; Bartke, S.; Kögel-Knabner, I.; Russell, D.; Eberhardt, E. & Vogel, H.-J. (2016): The BonaRes Centre - A virtual institute for soil research in the context of a sustainable bio-economy. Geophysical Research Abstracts Vol. 18, EGU2016-9087, http://meetingorganizer.copernicus.org/EGU2016/EGU2016-9087.pdf.

Multi-Stage Open Peer Review: Scientific Evaluation Integrating the Strengths of Traditional Peer Review with the Virtues of Transparency and Self-Regulation

PubMed Central

Pöschl, Ulrich

2012-01-01

The traditional forms of scientific publishing and peer review do not live up to all demands of efficient communication and quality assurance in today’s highly diverse and rapidly evolving world of science. They need to be advanced and complemented by interactive and transparent forms of review, publication, and discussion that are open to the scientific community and to the public. The advantages of open access, public peer review, and interactive discussion can be efficiently and flexibly combined with the strengths of traditional scientific peer review. Since 2001 the benefits and viability of this approach are clearly demonstrated by the highly successful interactive open access journal Atmospheric Chemistry and Physics (ACP, www.atmos-chem-phys.net) and a growing number of sister journals launched and operated by the European Geosciences Union (EGU, www.egu.eu) and the open access publisher Copernicus (www.copernicus.org). The interactive open access journals are practicing an integrative multi-stage process of publication and peer review combined with interactive public discussion, which effectively resolves the dilemma between rapid scientific exchange and thorough quality assurance. Key features and achievements of this approach are: top quality and impact, efficient self-regulation and low rejection rates, high attractivity and rapid growth, low costs, and financial sustainability. In fact, ACP and the EGU interactive open access sister journals are by most if not all standards more successful than comparable scientific journals with traditional or alternative forms of peer review (editorial statistics, publication statistics, citation statistics, economic costs, and sustainability). The high efficiency and predictive validity of multi-stage open peer review have been confirmed in a series of dedicated studies by evaluation experts from the social sciences, and the same or similar concepts have recently also been adopted in other disciplines, including the life sciences and economics. Multi-stage open peer review can be flexibly adjusted to the needs and peculiarities of different scientific communities. Due to the flexibility and compatibility with traditional structures of scientific publishing and peer review, the multi-stage open peer review concept enables efficient evolution in scientific communication and quality assurance. It has the potential for swift replacement of hidden peer review as the standard of scientific quality assurance, and it provides a basis for open evaluation in science. PMID:22783183

Can multi-scale calibrations allow MT-derived resistivities to be used to probe the structure of the deep crust?

NASA Astrophysics Data System (ADS)

Toy, Virginia; Billia, Marco; Easingwood, Richard; Kirilova, Martina; Kluge, Emma; Sauer, Katrina; Sutherland, Rupert; Timms, Nicholas; Townend, John

2017-04-01

Our current knowledge of microstructural and mechanical controls on rock resistivity is such that identical magnetotelluric (MT) anomalies could result from a highly mineralized but extinct shear zone, or from an unmineralized, fluid saturated, active shear zone. In pursuit of the ability to interpret the structure and activity (rather than just the presence) of buried geological structures from electromagnetic data, we are investigating correlations between rock structure and electrical properties of ductile shear zone rocks recovered from the active Alpine Fault Zone, New Zealand. Multi-scale measurements of resistivity exist for this zone: its ductile portions have anomalously high electrical conductivity identified in MT models constructed as part of the South Island Geophysical Transect (SIGHT). Additionally wireline resistivities were measured in situ to 820 m depth during the recent Deep Fault Drilling Project (DFDP-2), and resisistivity of hand samples has been measured at laboratory conditions [Kluge et al., Abstract EGU2017-10139]. In exhumed and borehole samples, the distributions and arrangements of conductivity carriers - graphite, amorphous carbon, and grain boundary pores that would have contained brines or other conductive fluids at depth, have been characterised. These vary systematically according to the total ductile shear strain they have accommodated [Kirilova et al., Abstract EGU2017-5773; Sauer et al., Abstract EGU2017-10485]. Transmission electron microscopy analyses of grain boundaries also indicate that they contain carbon. The next phases of our investigation involve: (i) construction of crustal fluid composition models by quantitative microstructural and compositional/mineralogical mapping of fluid remnants and their solid residues and calibration of these using in situ measurements of fluid composition in DFDP-2 at depths to 820 m; (ii) calculation of resistivities for real microstructures based on electrical properties of the individual component minerals and fluids - for microstructures fully characterised in three-dimensions; (iii) measurement of the effects of dynamic linking of phases during ductile creep of solid rock on complex resistivity of DFDP samples at a range of realistic crustal temperatures and pressures. A particular challenge in this study is to determine appropriate scaling relationships of electrical properties among samples, boreholes, and MT models because dielectric constants of minerals depend on frequency of the imposed current, which varies with scale and, consequently, measurement method. We invite discussion of strategies to overcome this.

78 FR 19093 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... doing a general visual inspection of the housing assembly of the packboard release mechanism to determine if its surface treatment has been sealed, and if the surface of the housing assembly is unsealed, replacing the housing assembly with a new or serviceable housing assembly. We are issuing this AD to detect...

General view of the Orbiter Discovery mated to the External ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Orbiter Discovery mated to the External Tank and Solid Rocket Booster assembly in the Vehicle Assembly Building at Kennedy Space Center - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Booklets for children related with Earth Sciences published in Mexico

NASA Astrophysics Data System (ADS)

Alaniz, S. A.; Nieto-Samaniego, A. F.

2009-04-01

The Centro de Geociencias, at the Universidad Nacional Autonoma de Mexico, has published a series of booklets for children, entitled "Simple experiments to understand a complex Earth". It is part of the activities of the Mexican committee of the International Year of the Planet Earth. Each booklet contains experiments related with an Earth Sciences topic and includes the procedure to do one of the "Ten most beautiful experiments in physics" (Crease, P., Physics World May 2002 p17 and September 2002 pp19-20). In Mexico, as in other developing countries, there is very little information about Science in general and Earth Sciences in particular, in the basic education programs. Also, there is poor bibliography in Spanish about science experiments. For this reason, we try to fill the vacuum by distributing free the booklets in Science Museums and rural basic schools in paper, and by Internet in the Centro de Geociencias web site (http://www.geociencias.unam.mx/geociencias/difusion/indice.html). At present, we have been distributed 100,000 copies of 5 issues: 1."Atmospheric pressure and the falling bodies", it deals with the Galileo experiment of falling bodies, he proposed that all the bodies fall down at the same velocity. We discuss the properties of the atmosphere air (temperature, pressure and volume) and concluded that Galileo is right but when the bodies are very light. 2. "The light and the colors" is based in the Newton's decomposition of sunlight with a prism experiment. This booklet contains nine experiments to explain the colors that we find in Earth like the blue of the sky, the orange of the sunset, the rainbow and the mirage. 3. "¿Eureka! oceans and continents float". This booklet presents seven experiments related with density and buoyancy to explain the principles of the Plate tectonics theory. 4. "Climate hanging by a thread", Foucault pendulum demonstrates the rotation of Earth without seeing the stars, in this booklet, we explain, through 9 experiments, how the Earth's rotation influences climate. 5. "The Earth and its waves". This booklet presents seven experiments to explain how the knowledge of the wave behavior help us to understand phenomena like tsunamis, earthquakes, colors and telecommunications, etc. All the booklets are in Spanish, printing was sponsored by the Academia Mexicana de Ciencias, the Universidad Nacional Autonoma de Mexico among other institutions. We will bring to the EGU General Assembly some booklets to see if any institution is interested in publishing and distribute them in another language.

General view of the Space Shuttle Main Engine (SSME) assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-pressure oxidizer Turbopump discharge Duct looping from the upper left side of the engine assembly to the lower left side of the assembly, the Low-Pressure Fuel Turbopump (LPFTP) is on the upper left of the assembly in this view and the LPFTP Discharge Duct loops from the upper left to upper right then turns back and down the assembly to the High-Pressure Fuel Turbopump on the lower right of the assembly. The Engine Controller and the Main fuel Valve Hydraulic Actuator are on the lower left portion of the assembly. The vertical rod that is in the approximate center of the engine assembly is a piece of ground support equipment call a Gimbal Actuator Replacement Strut which are used on the SSMEs when they are not installed in an orbiter. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Near-Surface Dispersion and Circulation in the Marmara Sea (MARMARA)

DTIC Science & Technology

2010-01-01

NURC (P.I.s: Drs. S. Besiktepe and J. Chiggiato ) • The NRL Exchange Processes in Ocean Straits (EPOS) project to improve our understanding on the...View/AEGEAN_SEA ) PUBLICATIONS Chiggiato , J., S. Besiktepe, E. Jarosz, J. Book, R. Gerin, P.-M. Poulain and L. Torrisi (2010) Numerical modelling of...EGU2010-2697. Chiggiato , J., S. Besiktepe, E. Jarosz, J. Book, R. Gerin, P.-M. Poulain and L. Torrisi (2010) Numerical modelling of the surface

Self-Assembly through Noncovalent Preorganization of Reactants: Explaining the Formation of a Polyfluoroxometalate.

PubMed

Schreiber, Roy E; Avram, Liat; Neumann, Ronny

2018-01-09

High-order elementary reactions in homogeneous solutions involving more than two molecules are statistically improbable and very slow to proceed. They are not generally considered in classical transition-state or collision theories. Yet, rather selective, high-yield product formation is common in self-assembly processes that require many reaction steps. On the basis of recent observations of crystallization as well as reactions in dense phases, it is shown that self-assembly can occur by preorganization of reactants in a noncovalent supramolecular assembly, whereby directing forces can lead to an apparent one-step transformation of multiple reactants. A simple and general kinetic model for multiple reactant transformation in a dense phase that can account for many-bodied transformations was developed. Furthermore, the self-assembly of polyfluoroxometalate anion [H 2 F 6 NaW 18 O 56 ] 7- from simple tungstate Na 2 WO 2 F 4 was demonstrated by using 2D 19 F- 19 F NOESY, 2D 19 F- 19 F COSY NMR spectroscopy, a new 2D 19 F{ 183 W} NMR technique, as well as ESI-MS and diffusion NMR spectroscopy, and the crucial involvement of a supramolecular assembly was found. The deterministic kinetic reaction model explains the reaction in a dense phase and supports the suggested self-assembly mechanism. Reactions in dense phases may be of general importance in understanding other self-assembly reactions. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Environmental Education in the Developing World.

ERIC Educational Resources Information Center

Connor, James V.

This paper attempts to explore how developing nations can best respond to the request of the United Nations General Assembly to examine their ongoing programs and policies for environmental impact, and to report regularly to the General Assembly on the progress being made towards the objectives of "environmentally sound and sustainable…

Report on Education Legislation: 1990 Session of the General Assembly.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh.

Summaries of special provisions and ratified bills are presented in this report on educational legislation conducted by the 1990 session of the North Carolina General Assembly. Contents include legislation pertaining to education budget expansions and reductions and summaries of special provisions and ratified bills. Legislative outcomes include…

General view of the interior of the Vehicle Assembly Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the interior of the Vehicle Assembly Building showing the External Tank mated to the Solid Rocket Boosters awaiting the arrival and mating of the Orbiter Discovery. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Single- and Multi-Prime Contracting in North Carolina Public Construction.

ERIC Educational Resources Information Center

Bluestein, Frayda S.

1995-01-01

The North Carolina General Assembly directed the State Building Commission to study the comparative costs of multi- and single-prime contracting and report the results to the 1995 General Assembly. Describes the analysis of data collected from governmental units that had awarded construction contracts. Identifies some alternative contracting…

In-Space Assembly Capability Assessment for Potential Human Exploration and Science Applications

NASA Technical Reports Server (NTRS)

Jefferies, Sharon A.; Jones, Christopher A.; Arney, Dale C.; Stillwagen, Frederic H.; Chai, Patrick R.; Hutchinson, Craig D.; Stafford, Matthew A.; Moses, Robert W.; Dempsey, James A.; Rodgers, Erica M.;

Horizontal high speed stacking for batteries with prismatic cans

DOEpatents

Bartos, Andrew L.; Lin, Yhu-Tin; Turner, III, Raymond D.

2016-06-14

A system and method for stacking battery cells or related assembled components. Generally planar, rectangular (prismatic-shaped) battery cells are moved from an as-received generally vertical stacking orientation to a generally horizontal stacking orientation without the need for robotic pick-and-place equipment. The system includes numerous conveyor belts that work in cooperation with one another to deliver, rotate and stack the cells or their affiliated assemblies. The belts are outfitted with components to facilitate the cell transport and rotation. The coordinated movement between the belts and the components promote the orderly transport and rotation of the cells from a substantially vertical stacking orientation into a substantially horizontal stacking orientation. The approach of the present invention helps keep the stacked assemblies stable so that subsequent assembly steps--such as compressing the cells or attaching electrical leads or thermal management components--may proceed with a reduced chance of error.

An prediction and explanation of 'climatic swing

NASA Astrophysics Data System (ADS)

Barkin, Yury

2010-05-01

Introduction. In works of the author [1, 2] the mechanism has been offered and the scenario of formation of congelations and warming of the Earth and their inversion and asymmetric displays in opposite hemispheres has been described. These planetary thermal processes are connected with gravitational forced oscillations of the core-mantle system of the Earth, controlling and directing submission of heat in the top layers of the mantle and on a surface of the Earth. It is shown, that action of this mechanism should observed in various time scales. In particular significant changes of a climate should occur to the thousand-year periods, with the periods in tens and hundred thousand years. Thus excitation of system the core-mantle is caused by planetary secular orbital perturbations and by perturbations of the Earth rotation which as is known are characterized by significant amplitudes. But also in a short time scale the climate variations with the interannual and decade periods also should be observed, how dynamic consequences of the swing of the core-mantle system of the Earth with the same periods [3]. The fundamental phenomenon of secular polar drift of the core relatively to the viscous-elastic and changeable mantle [4] in last years has obtained convincing confirmations various geosciences. Reliable an attribute of influence of oscillations of the core on a variation of natural processes is their property of inversion when, for example, activity of process accrues in northern hemisphere and decreases in a southern hemisphere. Such contrast secular changes in northern and southern (N/S) hemispheres have been predicted on the base of geodynamic model [1] and revealed according to observations: from gravimetry measurements of a gravity [5]; in determination of a secular trend of a sea level, as global, and in northern and southern hemispheres [6, 7]; in redistribution of air masses [6, 8]; in geodetic measurements of changes of average radiuses of northern and southern hemispheres [9]; in contrast changes of physical fields, for example, streams of heat, currents and circulation at ocean and an atmosphere, etc. The geodynamic mechanism [1] also unequivocally specifies, that the secular trend in global climatic characteristics of the Earth, and also inversion and asymmetric tendencies of change of a climate, in its northern and southern hemispheres in present period should be observed. The mechanism of a warming up of layers of the mantle and cyclic inversion changes of a climate. According to a developed geodynamic model all layers of the mantle at oscillations and motions of the core under action of its gravitational attraction test wide class of inversion deformations [1]. Thus the part of energy of deformations passes in heat by virtue of dissipation properties of the mantle. Than more intensively oscillations of the core, the more amplitudes of these oscillations, the occur the specified thermal transformations more intensively. As relative displacements of the core have cyclic character, because of cyclic influences on the core-mantle system of external celestial bodies also a formation of heat flows and warmed plume materials (substances) will have also cyclic character. In particular orbital perturbations with Milankovitch's periods in 100 kyr, 41 kyr, etc. will be precisely reflected in variations of the specified thermal flows and, accordingly, a planetary climate. In it the essence of occurrence of cycles of congelations on the Earth [2] consists. If during any period of time the core behaves passively, amplitudes of its oscillations are small the thermal flows to a surface of a planet will be decrease. This geodynamic conditions corresponds to the periods of a cold snap. And on the contrary, if the core and mantle interact actively and make significant oscillations the thermal flows to a surface of a planet accrues. This geodynamic state corresponds to the periods of warming. At drift of the core to the north and its oscillations with accrueing amplitude (for example, in present period) submission of heat in the top layers of the mantle will accrue. It is warmly allocated in all layers of the mantle deformed by an attraction of the drifting and oscillating core. Mechanisms of warming. But a base layer is the layer D" ("kitchen of plume-tectonics"). As we know the two mechanisms work for warm redistribution into the Earth. First is a mechanism of convection. In our geodynamical model it has forced nature and is organized and controlled by gravitational action of external celestial bodies and as result has cyclical character. Second mechanism is a plume mechanism which organizes the warmed masses redistributions in higher levels of the mantle, on a bottom of ocean and on a surface of the Earth. In accordance with our geodynamical model mentioned redistribution of warmed mass also has forced character. It is organized and controlled by gravitational action of the external celestial bodies on core-mantle system and also has cyclic nature. Contrast secular warming of Northern and Southern hemispheres of the Earth in present epoch. And warm flows are asymmetrically, more intensively warm is redistributed in northern hemisphere of the Earth and less intensively in a southern hemisphere. From here it follows, that the phenomenon of more intensive warming up of northern hemisphere, rather than southern in present period should be observed. Data of climatic observations (in first temperature trends for various latitude belts). Really, the trend of increase of temperature in northern hemisphere is characterized by greater rate, than a trend of temperature in a southern hemisphere. "A climatic swing". In work [2] it was emphasized, that the climatic changes caused by the mechanism of forced oscillations of the core-mantle system, occur to a wide spectrum of frequencies. In particular annual, monthly and even daily fluctuations of the core will inevitably cause thin, but appreciable, climatic changes with the specified periods and it multiple. Similar sort of a variations, for example, are seen in variations of average atmospheric pressure in northern and southern hemispheres. We shall emphasize, what even in these thin variations of climatic conditions on the Earth also should the phenomenon of inversion and asymmetry in relation to corresponding opposite hemispheres of the Earth, in particular in relation to northern and southern hemispheres is precise be shown. New important confirmations of developed geodynamic model, to theoretical results [2, 3] and told above have been obtained by scientists from the Great Britain, Germany, France and the USA [10]. On ice cores they had been studied changes of a climate in area of Greenland and Antarctica and have been obtained confirmations to the phenomenon of inversion changes of a climate in southern and northern hemispheres of the Earth. There was even a name to this phenomenon - "a climatic swing". As authors of clause have established, sharp downturn of temperature in northern hemisphere during last glacial age (100-15 thousand years ago) was accompanied by simultaneous warming of a climate in a southern hemisphere [10]. Scientists have found out this fact, analyzing isotope structure of sedimentary breeds of Atlantic. The phenomenon of contrast (inversion) tendencies in changes of a climate (secular and cyclic, including with the thousand-year periods and periods of Milankovitch) has been predicted in works [1, 2]. The contrast and opposite directed tendencies in change of a climate should be observed first of all in relation to northern and southern hemispheres of the Earth due to polar character of the core displacements. Thus, the nature of "a climatic swing" when one hemisphere gets warm, and the second is cooled, is connected with cyclic polar oscillations of the core-mantle system of the Earth in a corresponding time scale, in particular in a scale of cycles of Milankovitch. The amplitudes of the swing of the core-mantle system and their changes in the time have an important role and value for style and intensity of warming and cooling. References [1] Barkin Yu.V. (2002) An explanation of endogenous activity of planets and satellites and its cyclisity. Isvestia sekcii nauk o Zemle Rossiiskoi akademii ectestvennykh nauk. Vyp. 9, М., VINITI, pp. 45-97. In Russian. [2] Barkin Yu.V. (2004) Dynamics of the Earth shells and variations of paleoclimate. Proceedings of Milutin Milankovitch Anniversary Symposium "Paleoclimate and the Earth climate system" (Belgrade, Serbia, 30 August - 2 September, 2004). Belgrade, Serbian Academy of Sciences and Art, pp. 161-164. [3] Barkin Yu.V. (2007) Inversion of periodic and trend variations of climate in opposite hemispheres of the Earth and their mechanism. Proceedings of IUGG XXIV General Assembly, Perugia, Italy 2007: Earth: Our Changing Planet (Perugia, Italy, July 2-13, 2007) (P) - IAPSO, JPS001 "Interannual and Interdecadal Climate Variability", p. 1674. www. iugg2007perugia.it. [4] Barkin Yu.V. (2008) Secular polar drift of the core in present epoch: geodynamical and geophysical consequences and confirmations. General and regional problems of tectonics and geodynamics. Materials of XLI Tectonic Conference. V. 1. -M.:GEOS. p. 55-59. In Russian. [5] Barkin Yu.V. (2009) An explanation of secular variations of a gravity at stations Ny-Alesund, Medicine, Churchill and Syowa. Materials of the International Conference: «Yu.P. Bulashevich's fifth scientific readings. A deep structure. Geodynamics. A thermal field of the Earth. Interpretation of geophysical fields» (Ekaterinburg, 6 - 10 July, 2009). pp. 27-31. In Russian. [6] Barkin Yu.V. (2005) Oscillations of the Earth core, new oceanic tides and dynamical consequences. Materials of XI International Scientific Conference "Structure, geodynamics and mineral genetic processes in lithosphere" (September, 20-22 2005, Syktyvkar, Russia), Publisher of Geology Institute of Komi SC of Ural Section of RAS, Syktyvkar, pp. 26-28. In Russian. [7] Barkin Yu.V. (2009) Prediction and explanation of mean sea levels in northern hemisphere, in southern hemisphere and all ocean of the Earth. EGU General Assembly (Vienna, Austria, 19-24 April 2009). Geophysical Research Abstracts, Volume 11, 2009, abstract # EGU2009-1610. [8] Barkin Yu.V. (2007) Forced redistribution of air masses between southern and northern hemispheres of the Earth. Proceedings of IUGG XXIV General Assembly, Perugia, Italy 2007: Earth: Our Changing Planet (Perugia, Italy, July 2-13, 2007), (A)-IAGA, JAS008, p. 326. www. iugg2007perugia.it. [9] Barkin, Yu.V.; Shuanggen J. (2007) On variations of the mean radius of the Northern and Southern Hemispheres of the Earth. EGU General Assembly (Vienna, Austria, 15-20 April 2007). Geoph. Res. Abs., Vol. 9, 2007, abstract # EGU07-A-08183. [10] Stephen Barker, Paula Diz, Maryline J. Vautravers, Jennifer Pike, Gregor Knorr, Ian R. Hall & Wallace S. Broecker (2009) Interhemispheric Atlantic seesaw response during the last deglaciation. Nature, 457, 1097-1102 (26 February 2009) | doi:10.1038/nature07770.

Suitability aero-geophysical methods for generating conceptual soil maps and their use in the modeling of process-related susceptibility maps

NASA Astrophysics Data System (ADS)

Tilch, Nils; Römer, Alexander; Jochum, Birgit; Schattauer, Ingrid

2014-05-01

In the past years, several times large-scale disasters occurred in Austria, which were characterized not only by flooding, but also by numerous shallow landslides and debris flows. Therefore, for the purpose of risk prevention, national and regional authorities also require more objective and realistic maps with information about spatially variable susceptibility of the geosphere for hazard-relevant gravitational mass movements. There are many and various proven methods and models (e.g. neural networks, logistic regression, heuristic methods) available to create such process-related (e.g. flat gravitational mass movements in soil) suszeptibility maps. But numerous national and international studies show a dependence of the suitability of a method on the quality of process data and parameter maps (f.e. Tilch & Schwarz 2011, Schwarz & Tilch 2011). In this case, it is important that also maps with detailed and process-oriented information on the process-relevant geosphere will be considered. One major disadvantage is that only occasionally area-wide process-relevant information exists. Similarly, in Austria often only soil maps for treeless areas are available. However, in almost all previous studies, randomly existing geological and geotechnical maps were used, which often have been specially adapted to the issues and objectives. This is one reason why very often conceptual soil maps must be derived from geological maps with only hard rock information, which often have a rather low quality. Based on these maps, for example, adjacent areas of different geological composition and process-relevant physical properties are razor sharp delineated, which in nature appears quite rarly. In order to obtain more realistic information about the spatial variability of the process-relevant geosphere (soil cover) and its physical properties, aerogeophysical measurements (electromagnetic, radiometric), carried out by helicopter, from different regions of Austria were interpreted. Previous studies show that, especially with radiometric measurements, the two-dimensional spatial variability of the nature of the process-relevant soil, close to the surface can be determined. In addition, the electromagnetic measurements are more important to obtain three-dimensional information of the deeper geological conditions and to improve the area-specific geological knowledge and understanding. The validation of these measurements is done with terrestrial geoelectrical measurements. So both aspects, radiometric and electromagnetic measurements, are important and subsequently, interpretation of the geophysical results can be used as the parameter maps in the modeling of more realistic susceptibility maps with respect to various processes. Within this presentation, results of geophysical measurements, the outcome and the derived parameter maps, as well as first process-oriented susceptibility maps in terms of gravitational soil mass movements will be presented. As an example results which were obtained with a heuristic method in an area in Vorarlberg (Western Austria) will be shown. References: Schwarz, L. & Tilch, N. (2011): Why are good process data so important for the modelling of landslide susceptibility maps?- EGU-Postersession "Landslide hazard and risk assessment, and landslide management" (NH 3.6), Vienna. [http://www.geologie.ac.at/fileadmin/user_upload/dokumente/pdf/poster/poster_2011_egu_schwarz_tilch_1.pdf] Tilch, N. & Schwarz, L. (2011): Spatial and scale-dependent variability in data quality and their influence on susceptibility maps for gravitational mass movements in soil, modelled by heuristic method.- EGU-Postersession "Landslide hazard and risk assessment, and landslide management" (NH 3.6); Vienna. [http://www.geologie.ac.at/fileadmin/user_upload/dokumente/pdf/poster/poster_2011_egu_tilch_schwarz.pdf

General view of a Space Shuttle Main Engine (SSME) mounted ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of a Space Shuttle Main Engine (SSME) mounted on an SSME engine handler, taken in the SSME Processing Facility at Kennedy Space Center. The most prominent features of the engine assembly in this view are the Low-Pressure Fuel Turbopump Discharge Duct looping diagonally across the top of the assembly and connecting to the High-Pressure Fuel Turbopump, the Low-Pressure Oxidizer Turbopump (LPOTP) located center right of the assembly and the LPOTP Discharge Duct looping around from the pump to the underside of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Unconference session at the IAU General Assembly 2015

NASA Astrophysics Data System (ADS)

Nava, Tibisay Sankatsing; Venugopal, Ramasamy; Verdolini, Silvia

2016-10-01

The Astronomy For Development Focus Meeting 20 at the IAU General Assembly encompassed an `Unconference' session as part of the proceedings. Unstructured conferences, with their potential to unleash innovative ideas, are gaining traction in various conferences and symposia. Astronomy For Development is a field that is applicable to the entire Astronomy community (and even beyond) and hence an unconference inviting ideas and fostering frank dialogue is very pertinent. Officially one of the final sessions of the the 2015 General Assembly, the unconference session was intended to provide a balanced platform for a diverse set of participants and act as an informal setting to promote open discussion on topics of relevance to Astronomy for Development.

50. Photograph of a line drawing. 'AREA B, GENERAL ASSEMBLY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. Photograph of a line drawing. 'AREA B, GENERAL ASSEMBLY, BUILDINGS I, J, L, & M - LINES 9 & 10.' Holston Army Ammunition Plant. March 13, 1967; revised November 15, 1967, January 3, 1968. Delineator: Unknown. Drawing # 7651-1009.454. - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

Human Rights Education Ways and Means

ERIC Educational Resources Information Center

Sajan, K. S.

2010-01-01

This paper describes the importance of human rights education as proclaimed by UN (1994) and also the strategies for developing human rights education by UN General assembly 2005. In proclaiming the United Nations Decade for Human Rights Education (1995-2004), in December 1994, the General Assembly defined human rights education as "a life-long…

Self-Assembled Student Interactions in Undergraduate General Chemistry Clicker Classrooms

ERIC Educational Resources Information Center

MacArthur, James R.; Jones, Loretta

2013-01-01

Student interviews, focus groups, and classroom observations were used in an exploratory study of the nature of student interactions in a large (300+ students) general chemistry course taught with clickers. These data suggest that students are self-assembling their learning environment: choosing ways in which to interact with one another during…

The feasibility and effectiveness of provisional and graduated licensing strategies as alternatives to full licensing for young drivers in Virginia.

DOT National Transportation Integrated Search

1995-01-01

In its 1995 session, the Virginia General Assembly passed House Bill 2320, which lowered the age at which persons could obtain a learner's permit from 15 years 8 months to 15 years. In the same session, the General Assembly passed House Joint Resolut...

Evaluation and validation of de novo and hybrid assembly techniques to derive high quality genome sequences

DOE PAGES

Utturkar, Sagar M.; Klingeman, Dawn Marie; Land, Miriam L.; ...

2014-06-14

Our motivation with this work was to assess the potential of different types of sequence data combined with de novo and hybrid assembly approaches to improve existing draft genome sequences. Our results show Illumina, 454 and PacBio sequencing technologies were used to generate de novo and hybrid genome assemblies for four different bacteria, which were assessed for quality using summary statistics (e.g. number of contigs, N50) and in silico evaluation tools. Differences in predictions of multiple copies of rDNA operons for each respective bacterium were evaluated by PCR and Sanger sequencing, and then the validated results were applied as anmore » additional criterion to rank assemblies. In general, assemblies using longer PacBio reads were better able to resolve repetitive regions. In this study, the combination of Illumina and PacBio sequence data assembled through the ALLPATHS-LG algorithm gave the best summary statistics and most accurate rDNA operon number predictions. This study will aid others looking to improve existing draft genome assemblies. As to availability and implementation–all assembly tools except CLC Genomics Workbench are freely available under GNU General Public License.« less

Multi-Robot Assembly Strategies and Metrics.

PubMed

Marvel, Jeremy A; Bostelman, Roger; Falco, Joe

2018-02-01

We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies.

Multi-Robot Assembly Strategies and Metrics

PubMed Central

MARVEL, JEREMY A.; BOSTELMAN, ROGER; FALCO, JOE

2018-01-01

We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies. PMID:29497234

49 CFR 572.71 - General description.

Code of Federal Regulations, 2013 CFR

2013-10-01

... D SA 106C 041 Arm Assembly (right) SA 106C 001, sheet 14 A SA 106C 042 Arm Assembly (left) SA 106C... Assembly (left) SA 106C 001, sheet 17 A (c) Adjacent segments are joined in a manner such that except for...

49 CFR 572.71 - General description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... D SA 106C 041 Arm Assembly (right) SA 106C 001, sheet 14 A SA 106C 042 Arm Assembly (left) SA 106C... Assembly (left) SA 106C 001, sheet 17 A (c) Adjacent segments are joined in a manner such that except for...

EGU2013 SM1.4/GI1.6 session: "Improving seismic networks performances: from site selection to data integration"

NASA Astrophysics Data System (ADS)

Pesaresi, D.; Busby, R.

2013-08-01

The number and quality of seismic stations and networks in Europe continually improves, nevertheless there is always scope to optimize their performance. In this session we welcomed contributions from all aspects of seismic network installation, operation and management. This includes site selection; equipment testing and installation; planning and implementing communication paths; policies for redundancy in data acquisition, processing and archiving; and integration of different datasets including GPS and OBS.

The Coast Artillery Journal. Volume 80, Number 1, January-February 1937

DTIC Science & Technology

1937-02-01

tractor and r3ilwav units. It was further real- ized that although this egu~pment was not of the latest desired type that it could serve a very useful...American system of national defense and the systems of older countries was that theirs were big and ours was little. The "resiliency" or "expansibility" by...activities it was necessary to wear the special type of clothing known as Alaskan issue. This outfit, though decidedly effective in providing pro- tection

Balance in scientific impact assessment: the EGU Awards Committe experience

NASA Astrophysics Data System (ADS)

Montanari, Alberto

2016-04-01

Evaluation of scientific impact is becoming an essential step all over the world for assigning academic positions, funding and recognition. Impact is generally assessed by means of objective bibliometric indicators which are frequently integrated with a subjective evaluation by one or more individuals. An essential requirement of impact assessment is to ensure balance across several potential discriminating factors, including gender, ethnics, culture, scientific field and many others. Scientific associations need to ensure balance in any step of their activity and in particular when electing their representatives, evaluating scientific contributions, reviewing papers and assigning awards. While ensuring balance is a strict necessity, how to get to target is still a matter of vivid debates. In fact, the context of science is very different with respect to the general context of society and the need for scientific associations to maintain confidentiality in their evaluation procedures makes the application of transparent procedures more complicated. This talk aims to present the experience and the efforts of the European Geosciences Union to ensure balance, with a particular focus on gender balance. Data and statistics will be presented in the attempt to provide constructive indications to get to the target of giving equal opportunities to researchers across gender, continents and ethnic groups. Science is a unifying discipline and balance will be vital to ensure that humans and our planet co-evolve sustainably.

Cassini RADAR at Titan : Results in 2014/2015

NASA Astrophysics Data System (ADS)

Lorenz, Ralph D.

2015-04-01

Since the last EGU meeting, two Cassini flybys of Titan will have featured significant RADAR observations, illuminating our understanding of this enigmatic, complex world and its hydrocarbon seas in particular. T104, which executed in August 2014, featured a nadir-pointed altimetry swath over the northern part of Kraken Mare, Titan's largest sea. The echo characteristics showed that the sea surface was generally flat (to within a few mm), although a couple of areas appear to show some evidence of roughness. Intriguingly, altimetry processing which yielded (Mastrogiuseppe et al., GRL, 2014) the detection of a prominent bottom echo 160m beneath the surface of Ligeia Mare on T91 failed to yield a similar echo over most of Kraken on T104, suggesting either that Kraken is very deep (perhaps consistent with rather steep shoreline topography) or that the liquid in Kraken is more radar-absorbing than that in Ligeia, or both. The absorbing-liquid scenario may be consistent with a hydrological model for Titan's seas (Lorenz, GRL, 2014) wherein the most northerly seas receive more 'fresh' methane input, flushing ethane and other lower-volatility (and more radar-absorbing) solutes south into Kraken. T108, the last northern seas radar observation until T126 at the very end of the Cassini tour in 2017, is planned to execute on 11th January 2015, and preliminary results will be presented at the EGU meeting. This flyby features altimetry over part of Punga Mare, which will provide surface roughness information and possible bathymetry, permitting comparison of nadir-pointed data over all of Titan's three seas (Ligeia on T91; Kraken Mare on T104). The flyby also includes SAR observation of the so-called Ligeia 'Magic Island', the best-observed of several areas of varying radar brightness on Titan's seas. This brightness may be due to sediments suspended by currents, or by roughening of the surface either by local wind stress ('catspaw') or non-local stress (wind-driven currents). SAR imaging and altimetry over land areas on T104 and T108 will be reviewed (current flybys devote more close-approach time to altimetry, in part because of solar heating pointing constraints for other Cassini instruments), and selected interpretations and products of earlier coverage will be discussed.

Lifting system and apparatus for constructing wind turbine towers

DOEpatents

Livingston, Tracy; Schrader, Terry; Goldhardt, James; Lott, James

2011-02-01

The disclosed invention is utilized for mounting a wind turbine and blade assembly on the upper end of a wind turbine tower. The invention generally includes a frame or truss that is pivotally secured to the top bay assembly of the tower. A transverse beam is connected to the frame or truss and extends fore of the tower when the frame or truss is in a first position and generally above the tower when in a second position. When in the first position, a wind turbine or blade assembly can be hoisted to the top of the tower. The wind turbine or blade assembly is then moved into position for mounting to the tower as the frame or truss is pivoted to a second position. When the turbine and blade assembly are secured to the tower, the frame or truss is disconnected from the tower and lowered to the ground.

General view of a Space Shuttle Main Engine (SSME) mounted ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of a Space Shuttle Main Engine (SSME) mounted on an SSME engine handler, taken in the SSME Processing Facility at Kennedy Space Center. The most prominent features of the engine assembly in this view are the Low-Pressure Oxidizer Turbopump Discharge Duct looping around the right side of the engine assembly then turning in and connecting to the High-Pressure Oxidizer Turbopump. The sphere in the approximate center of the assembly is the POGO System Accumulator, the Engine Controller is located on the bottom and slightly left of the center of the Engine Assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view of the Aft Rocket Motor mated with the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Rocket Motor mated with the External Tank Attach Ring and Aft Skirt Assembly in the process of being mounted onto the Mobile Launch Platform in the Vehicle Assembly Building at Kennedy Space Center. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view of the Aft Rocket Motor mated with the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Rocket Motor mated with the External Tank Attach Ring and Aft Skirt Assembly being transported from the Rotation Processing and Surge Facility to the Vehicle Assembly Building at Kennedy Space Center. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Session of the General Assembly of IUCN (15th, Christchurch, New Zealand, October 11-23, 1981).

ERIC Educational Resources Information Center

International Union for Conservation of Nature and Natural Resources, Morges, (Switzerland).

Resolutions adopted by the 15th session of the General Assembly of the International Union for Conservation of Nature and Natural Resources (IUCN) are provided in this document. These resolutions focus on areas/issues related to: (1) world conservation strategy; (2) conservation and peace; (3) people, resources, and environment; (4) environmental…

Recommendations to the Illinois General Assembly on Zoning for Community Residences.

ERIC Educational Resources Information Center

Illinois Planning Council on Developmental Disabilities, Springfield.

The Illinois General Assembly enacted the Community Residence Location Planning Act (CRLPA) to provide assistance to the state's 110 home rule municipalities to help bring their zoning ordinances into compliance with 1988 amendments to the U.S. Fair Housing Act. This report presents the results of this effort and offers recommendations to the…

Teacher Activism in Response to North Carolina's 2013 Excellent Public Schools Act

ERIC Educational Resources Information Center

Cox, Courtnee Danielle

2017-01-01

In 2013, North Carolina's political power balances shifted with the election of a Republican governor, Pat McCrory, and a Republican super-majority in the General Assembly. This shift in political power allowed for more conservative legislation to be introduced in the North Carolina General Assembly. Some of the newly proposed legislation,…

Colorado Commission on Higher Education Report to the General Assembly Educator Preparation, Fiscal Year 2009-2010

ERIC Educational Resources Information Center

Colorado Commission on Higher Education, 2011

2011-01-01

Pursuant to Section 23-1-121(6) Colorado Revised Statutes (CRS), the Colorado Commission on Higher Education (CCHE) reports annually to the Education Committees of the General Assembly on the effectiveness of the review of educator preparation programs. This report also includes: (1) An overview of enrollments in approved educator preparation…

The pedestrian in the transportation system : legislation for improved traffic safety : a report to the governor and General Assembly of Virginia in response to House Joint Resolution no. 419.

DOT National Transportation Integrated Search

1990-01-01

During its 1989 session, the Virginia General Assembly passed House Joint Resolution No. 419. The Resolution requested that Virginia's pedestrian safety laws be studied and that recommendations for revisions of those laws be made to improve pedestria...

Forced response of mistuned bladed disk assemblies

NASA Technical Reports Server (NTRS)

Watson, Brian C.; Kamat, Manohar P.; Murthy, Durbha V.

1993-01-01

A complete analytic model of mistuned bladed disk assemblies, designed to simulate the dynamical behavior of these systems, is analyzed. The model incorporates a generalized method for describing the mistuning of the assembly through the introduction of specific mistuning modes. The model is used to develop a computational bladed disk assembly model for a series of parametric studies. Results are presented demonstrating that the response amplitudes of bladed disk assemblies depend both on the excitation mode and on the mistune mode.

X-ray Production in a Laboratory Streamer Discharge

NASA Astrophysics Data System (ADS)

Lehtinen, N. G.; Kochkin, P.; Ostgaard, N.

2016-12-01

A 1D model of a 1-m scale laboratory discharge streamer system [Lehtinen et al, 2016, http://meetingorganizer.copernicus.org/EGU2016/EGU2016-6180.pdf] has reproduced the experimentally-observed [Kochkin et al, 2014, doi:10.1088/0022-3727/47/14/145203] detached streamer systems (pilots). The pilots grow in both directions and thus produce counter-streamers which collide with forward-moving streamers, a mechanism which was proposed to lead to the production of x-rays [Cooray, 2009, doi:10.1016/j.jastp.2009.07.010]. However, the 1D model is insufficient to analyse this process because in this model the electric field between the colliding streamers is averaged in the transverse direction and therefore the maximum fields are underestimated. In this presentation, we include the microscopic processes in the modeling of streamer propagation in order to calculate accurately the electric field enhancement between colliding streamers of opposite polarity. We evaluate the temporal and spatial characteristics of the enhanced electric field, which define the production of relativistic runaway electrons and x-rays. The x-ray output for the conditions occuring in a laboratory discharge is compared to the experimental data [Kochkin et al, 2012, doi:10.1088/0022-3727/45/42/425202; 2015, doi:10.1088/0022-3727/48/2/025205]. We note that the previous modeling of streamer collisions [Ihaddadene and Celestin, 2015, doi:10.1002/2015GL064623] obtained the field enhancements which are insufficient for the observed x-ray production.

The modules of trans-acyltransferase assembly lines redefined with a central acyl carrier protein.

PubMed

Vander Wood, Drew A; Keatinge-Clay, Adrian T

2018-06-01

Here, the term "module" is redefined for trans-acyltransferase (trans-AT) assembly lines to agree with how its domains cooperate and evolutionarily co-migrate. The key domain in both the polyketide synthase (PKS) and nonribosomal peptide synthetase (NRPS) modules of assembly lines is the acyl carrier protein (ACP). ACPs not only relay growing acyl chains through the assembly line but also collaborate with enzymes in modules, both in cis and in trans, to add a specific chemical moiety. A ketosynthase (KS) downstream of ACP often plays the role of gatekeeper, ensuring that only a single intermediate generated by the enzymes of a module is passed downstream. Bioinformatic analysis of 526 ACPs from 33 characterized trans-AT assembly lines reveals ACPs from the same module type generally clade together, reflective of the co-evolution of these domains with their cognate enzymes. While KSs downstream of ACPs from the same module type generally also clade together, KSs upstream of ACPs do not-in disagreement with the traditional definition of a module. Beyond nomenclature, the presented analysis impacts our understanding of module function, the evolution of assembly lines, pathway prediction, and assembly line engineering. © 2018 Wiley Periodicals, Inc.

Public Secondary School Dropouts in Pennsylvania 2003-04. Report to the General Assembly

ERIC Educational Resources Information Center

Hruska, Richard A., Comp.

2005-01-01

Act 49 of 1987 requires the Secretary of Education to provide the General Assembly with an annual report on public school dropouts in Pennsylvania. The purpose of this report is to document the actual number of students who drop out each year and to provide various characteristics about these students. The type of data collected about each dropout…

Public Secondary School Dropouts in Pennsylvania, 2002-03. Report to the General Assembly.

ERIC Educational Resources Information Center

Hruska, Richard A., Comp.

2004-01-01

Act 49 of 1987 requires the Secretary of Education to provide the General Assembly with an annual report on public school dropouts in Pennsylvania. The purpose of this report is to document the actual number of students who drop out each year and to provide various characteristics about these students. The type of data collected about each dropout…

Public Secondary School Dropouts in Pennsylvania 2005-06: Report to the General Assembly

ERIC Educational Resources Information Center

Bobek, Joanne R., Comp.

2007-01-01

Act 49 of 1987 requires the Secretary of Education to provide the General Assembly with an annual report on public school dropouts in Pennsylvania. The purpose of this report is to document the actual number of students who drop out each year and to provide various characteristics about these students. The type of data collected about each dropout…

The General Assembly of the United Nations, 1979 (34th).

ERIC Educational Resources Information Center

Keys, Donald F.

This report is a succinct summary of action taken by the 34th General Assembly of the United Nations. It is intended for use by members of UN delegations, UN secretariat staff, policy makers, scholars, students, and members of the public interested in global problems and world issues. The report provides an accurate record of actions taken,…

The effects of motor vehicle window tinting on traffic safety and enforcement : final report : a report to the Governor and General Assembly in response to Senate Joint Resolution 293, 1993 Session.

DOT National Transportation Integrated Search

1994-01-01

The 1993 Session of the Virginia General Assembly lessened restrictions relating to the application of aftermarket tinted window films to motor vehicle glass. Effective July 1, 1993, vehicles are allowed to have window tinting treatments that do not ...

General view taken in the transfer aisle in the Vehicle ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view taken in the transfer aisle in the Vehicle Assembly Building at the Kennedy Space Center looking at the Orbiter Discovery as it is being prepared to be hoisted, moved and mated to the External Tank/Solid Rocket Booster Assembly. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Assembler (elec. equip.) 826.884, Assembler, Electrical (elec. equip.) 826.884--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Finisher, Hand (toys & games) 9-13.01; Gluer (toys & games) 9-13.01; Laborer (toys & games) 9-13.01; Plastic-Toy Assembler (toys & games) 7-13.012; Toy Assembler (toys & games) 7-13.012--Technical Report on Standardization of the General Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Nuclear reactor

DOEpatents

Yant, Howard W.; Stinebiser, Karl W.; Anzur, Gregory C.

1977-01-01

A nuclear reactor, particularly a liquid-metal breeder reactor, whose upper internals include outlet modules for channeling the liquid-metal coolant from selected areas of the outlet of the core vertically to the outlet plenum. The modules are composed of a highly-refractory, high corrosion-resistant alloy, for example, INCONEL-718. Each module is disposed to confine and channel generally vertically the coolant emitted from a subplurality of core-component assemblies. Each module has a grid with openings, each opening disposed to receive the coolant from an assembly of the subplurality. The grid in addition serves as a holdown for the assemblies of the corresponding subplurality preventing their excessive ejection upwardly from the core. In the region directly over the core the outlet modules are of such peripheral form that they nest forming a continuum over the core-component assemblies whose outlet coolant they confine. Each subassembly includes a chimney which confines the coolant emitted by its corresponding subassemblies to generally vertical flow between the outlet of the core and the outlet plenum. Each subplurality of assemblies whose emitted coolant is confined by an outlet module includes assemblies which emit lower-temperature coolant, for example, a control-rod assembly, or fertile assemblies, and assemblies which emit coolant of substantially higher temperature, for example, fuel-rod assemblies. The coolants of different temperatures are mixed in the chimneys reducing the effect of stripping (hot-cold temperature fluctuations) on the remainder of the upper internals which are composed typically of AISI-304 or AISI-316 stainless steel.

Pultrusion Die Assembly

NASA Technical Reports Server (NTRS)

Wilson, Maywood L. (Inventor); Johnson, Gary S. (Inventor); Frye, Mark W. (Inventor); Stanfield, Clarence E. (Inventor)

1988-01-01

This invention relates generally to pultrusion die assemblies, and more particularly, to a pultrusion die assembly which incorporates a plurality of functions in order to produce a continuous, thin composite fiber reinforced thermoplastic material. The invention is useful for making high performance thermoplastic composite materials in sheets which can be coiled on a spool and stored for further processing.

Fall 1978 Directory - Assembly of Life Sciences, National Research Council.

ERIC Educational Resources Information Center

National Academy of Sciences, Washington, DC.

This directory of the Assembly of Life Sciences (ALS), National Research Council, reflects the status of all committees, their membership, Corresponding Societies, and ALS staff as of October, 1978. Organization charts illustrate the relationship between the Assembly of Life Sciences and the general structure of the National Academy of Sciences,…

29 CFR 1926.1404 - Assembly/Disassembly-general requirements (applies to all assembly and disassembly operations).

Code of Federal Regulations, 2013 CFR

2013-07-01

...'s procedures must be followed. When lifting loads without using outriggers or stabilizers, the manufacturer's procedures must be met regarding truck wedges or screws. (r) Rigging. In addition to following...(o)(3) before assembly/disassembly begins. (5) Boom and jib pick points. The point(s) of attachment...

29 CFR 1926.1404 - Assembly/Disassembly-general requirements (applies to all assembly and disassembly operations).

Code of Federal Regulations, 2012 CFR

2012-07-01

...'s procedures must be followed. When lifting loads without using outriggers or stabilizers, the manufacturer's procedures must be met regarding truck wedges or screws. (r) Rigging. In addition to following...(o)(3) before assembly/disassembly begins. (5) Boom and jib pick points. The point(s) of attachment...

29 CFR 1926.1404 - Assembly/Disassembly-general requirements (applies to all assembly and disassembly operations).

Code of Federal Regulations, 2011 CFR

2011-07-01

...'s procedures must be followed. When lifting loads without using outriggers or stabilizers, the manufacturer's procedures must be met regarding truck wedges or screws. (r) Rigging. In addition to following...(o)(3) before assembly/disassembly begins. (5) Boom and jib pick points. The point(s) of attachment...

29 CFR 1926.1404 - Assembly/Disassembly-general requirements (applies to all assembly and disassembly operations).

Code of Federal Regulations, 2014 CFR

2014-07-01

...'s procedures must be followed. When lifting loads without using outriggers or stabilizers, the manufacturer's procedures must be met regarding truck wedges or screws. (r) Rigging. In addition to following...(o)(3) before assembly/disassembly begins. (5) Boom and jib pick points. The point(s) of attachment...

The IAU Division A Working Group on the Third Realization of the ICRF: Background, Goals, Plans

NASA Astrophysics Data System (ADS)

Gaume, Ralph

2015-08-01

The XXVIII General Assembly of the IAU (Beijing, 2012) established the Division A Working Group on the Third Realization of the International Celestial Reference Frame (ICRF). The adopted charter of the ICRF3 Working Group includes a commitment to report on the implementation and execution plans for ICRF3 during the XXIX General Assembly of the IAU along with a targeted completion and presentation of ICRF3 in 2018 to the XXX General Assembly for adoption. This talk will discuss the background, purpose, and overall implementation plan for ICRF3, and motivate the concept, currently under consideration by the ICRF3 Working Group, that future realizations of the ICRF be based on multi-frequency astrometric data, starting with ICRF3.

Method and apparatus for assembling solid oxide fuel cells

DOEpatents

Szreders, B.E.; Campanella, N.

1988-05-11

This invention relates generally to solid oxide fuel power generators and is particularly directed to improvements in the assembly and coupling of solid oxide fuel cell modules. A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing. 17 figs.

Multiscaling of vegetative indexes from remote sensing images obtained at different spatial resolutions

NASA Astrophysics Data System (ADS)

Alonso, Carmelo; Tarquis, Ana M.; Zuñiga, Ignacio; Benito, Rosa M.

2017-04-01

Vegetation indexes, such as Normalized Difference Vegetation Index (NDVI) and enhanced Vegetation index (EVI), can been used to estimate root zone soil moisture through high resolution remote sensing images. These indexes are based in red (R), near infrared (NIR) and blue (B) wavelengths data. In this work we have studied the scaling properties of both vegetation indexes analyzing the information contained in two satellite data: Landsat-7 and Ikonos. Because of the potential capacity for systematic observations at various scales, remote sensing technology extends possible data archives from present time to over several decades back. For this advantage, enormous efforts have been made by researchers and application specialists to delineate vegetation indexes from local scale to global scale by applying remote sensing imagery. To study the influence of the spatial resolution the vegetation indexes map estimated with Ikonos-2 coded in 8 bits, with a resolution of 4m, have been compared through a multifractal analysis with the ones obtained with Lansat-7 8 bits, of 30 m. resolution, on the same area of study. The scaling behaviour of NDVI and EVI presents several differences that will be discussed based on the multifractal parameters extracted from the analysis. REFERENCES Alonso, C., Tarquis, A. M., Benito, R. M. and Zuñiga, I. Correlation scaling properties between soil moisture and vegetation indices. Geophysical Research Abstracts, 11, EGU2009-13932, 2009. Alonso, C., Tarquis, A. M. and Benito, R. M. Comparison of fractal dimensions based on segmented NDVI fields obtained from different remote sensors. Geophysical Research Abstracts, 14, EGU2012-14342, 2012. Escribano Rodriguez, J., Alonso, C., Tarquis, A.M., Benito, R.M. and Hernandez Diaz-Ambrona, C. Comparison of NDVI fields obtained from different remote sensors. Geophysical Research Abstracts,15, EGU2013-14153, 2013. Lovejoy, S., Tarquis, A., Gaonac'h, H. and Schertzer, D. Single and multiscale remote sensing techniques, multifractals and MODIS derived vegetation and soil moisture, Vadose Zone J., 7, 533-546, 2008. Renosh, P. R., Schmitt, F. G., and Loisel, H.: Scaling analysis of ocean surface turbulent heterogeneities from satellite remote sensing: use of 2D structure functions. PLoS ONE, 10, e0126975, 2015. Tarquis, A.M., Platonov, A., Matulka, A., Grau, J., Sekula, E., Diez, M. and Redondo J. M. Application of multifractal analysis to the study of SAR features and oil spills on the ocean surface. Nonlin. Processes Geophys., 21, 439-450, 2014.

System and method for incremental forming

DOEpatents

Beltran, Michael; Cao, Jian; Roth, John T.

2015-12-29

A system includes a frame configured to hold a workpiece and first and second tool positioning assemblies configured to be opposed to each other on opposite sides of the workpiece. The first and second tool positioning assemblies each include a toolholder configured to secure a tool to the tool positioning assembly, a first axis assembly, a second axis assembly, and a third axis assembly. The first, second, and third axis assemblies are each configured to articulate the toolholder along a respective axis. Each axis assembly includes first and second guides extending generally parallel to the corresponding axis and disposed on opposing sides of the toolholder with respect to the corresponding axis. Each axis assembly includes first and second carriages articulable along the first and second guides of the axis assembly, respectively, in the direction of the corresponding axis.

Quantifying the effect of Tmax extreme events on local adaptation to climate change of maize crop in Andalusia for the 21st century

NASA Astrophysics Data System (ADS)

Gabaldon, Clara; Lorite, Ignacio J.; Ines Minguez, M.; Lizaso, Jon; Dosio, Alessandro; Sanchez, Enrique; Ruiz-Ramos, Margarita

2015-04-01

Extreme events of Tmax can threaten maize production on Andalusia (Ruiz-Ramos et al., 2011). The objective of this work is to attempt a quantification of the effects of Tmax extreme events on the previously identified (Gabaldón et al., 2013) local adaptation strategies to climate change of irrigated maize crop in Andalusia for the first half of the 21st century. This study is focused on five Andalusia locations. Local adaptation strategies identified consisted on combinations of changes on sowing dates and choice of cultivar (Gabaldón et al., 2013). Modified cultivar features were the duration of phenological phases and the grain filling rate. The phenological and yield simulations with the adaptative changes were obtained from a modelling chain: current simulated climate and future climate scenarios (2013-2050) were taken from a group of regional climate models at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/). After bias correcting these data for temperature and precipitation (Dosio and Paruolo, 2011; Dosio et al., 2012) crop simulations were generated by the CERES-maize model (Jones and Kiniry, 1986) under DSSAT platform, previously calibrated and validated. Quantification of the effects of extreme Tmax on maize yield was computed for different phenological stages following Teixeira et al. (2013). A heat stress index was computed; this index assumes that yield-damage intensity due to heat stress increases linearly from 0.0 at a critical temperature to a maximum of 1.0 at a limit temperature. The decrease of crop yield is then computed by a normalized production damage index which combines attainable yield and heat stress index for each location. Selection of the most suitable adaptation strategy will be reviewed and discussed in light of the quantified effect on crop yield of the projected change of Tmax extreme events. This study will contribute to MACSUR knowledge Hub within the Joint Programming Initiative on Agriculture, Food Security and Climate Change (FACCE - JPI) of EU and is financed by MULCLIVAR project (CGL2012-38923-C02-02) and IFAPA project AGR6126 from Junta de Andalucía, Spain. References Dosio A. and Paruolo P., 2011. Bias correction of the ENSEMBLES high-resolution climate change projections for use by impact models: Evaluation on the present climate. Journal of Geophysical Research, VOL. 116, D16106, doi:10.1029/2011JD015934 Dosio A., Paruolo P. and Rojas R., 2012. Bias correction of the ENSEMBLES high resolution climate change projections for use by impact models: Analysis of the climate change signal. Journal of Geophysical Research, Volume 117, D17, doi: 0.1029/2012JD017968 Gabaldón C, Lorite IJ, Mínguez MI, Dosio A, Sánchez-Sánchez E and Ruiz-Ramos M, 2013. Evaluation of local adaptation strategies to climate change of maize crop in Andalusia for the first half of 21st century. Geophysical Research Abstracts. Vol. 15, EGU2013-13625, 2013. EGU General Assembly 2013, April 2013, Vienna, Austria. Jones C.A. and J.R. Kiniry. 1986. CERES-Maize: A simulation model of maize growth and development. Texas A&M Univ. Press, College Station. Ruiz-Ramos M., E. Sanchez, C. Galllardo, and M.I. Minguez. 2011. Impacts of projected maximum temperature extremes for C21 by an ensemble of regional climate models on cereal cropping systems in the Iberian Peninsula. Natural Hazards and Earth System Science 11: 3275-3291. Teixeira EI, Fischer G, van Velthuizen H, Walter C, Ewert F. Global hotspots of heat stress on agricultural crops due to climate change. Agric For Meteorol. 2013;170(15):206-215.

Halogen speciation in volcanic plumes - Development of compact denuder sampling techniques with in-situ derivatization followed by gas chromatography-mass spectrometry and their application at Mt. Etna, Mt. Nyiragongo and Mt. Nyamulagira in 2015.

NASA Astrophysics Data System (ADS)

Rüdiger, Julian; Bobrowski, Nicole; Hoffmann, Thorsten

2016-04-01

Volcanoes are a large source for several reactive atmospheric trace gases including sulfur and halogen containing species. The detailed knowledge of volcanic plume chemistry can give insights into subsurface processes and can be considered as a useful geochemical tool for monitoring of volcanic activity, especially halogen to sulfur ratios (e.g. Bobrowski and Giuffrida, 2012; Donovan et al., 2014). The reactive bromine species bromine monoxide (BrO) is of particular interest, because BrO as well as SO2 are readily measurable by UV spectrometer at a safe distance. Furthermore it is formed in the plume by a multiphase reaction mechanism under depletion of ozone in the plume. The abundance of BrO changes as a function of the reaction time and therefore distance from the vent as well as the spatial position in the plume. The precursor substance for the formation of BrO is HBr with Br2as an intermediate product. The reaction of HBr to BrO involves heterogeneous reactions involving aerosol particles, while Br2 reacts directly with O3 to form BrO in a UV radiation induced mechanism. Due to the lack of analytical approaches for the species analysis of halogens (HBr, Br2, Br, BrCl, HOBr) there are still uncertainties about the magnitude of volcanic halogen emissions and in particular their speciation and therefore also in the understanding of the bromine chemistry in volcanic plumes (Bobrowski et al., 2007). In this study a gas diffusion denuder sampling method using a 1,3,5-trimethoxybenzene (1,3,5-TMB) coating for the derivatization of reactive halogen species (Rüdiger et al., 2015) was characterized by reaction chamber experiments. The coating proved to be suitable to collect selectively gaseous bromine species with oxidation states of +1 or 0 (such as Br2, BrCl, BrO(H) and BrONO2), while being ignorant to HBr (OS -1). The reaction of 1,3,5-TMB with reactive bromine species gives 1-bromo-2,4,6-trimethoxybenzene (1-bromo-2,4,6-TMB) - other halogens give corresponding products. The diffusion denuder technique allows sampling of gaseous compounds exclusively without collecting particulate matter. Solvent elution of the derivatized analytes and subsequent analysis with gas chromatography-mass spectrometry gives a limit of detection below 1 ng of bromine. The method was applied in 2015 on volcanic gas plumes at Mt. Etna (Italy), Mt. Nyiragongo and Mt. Nyamulagira (DR Congo) giving reactive bromine mixing ratios from 0.3 ppb (Nyiragongo) up to 22 ppb (Etna, NEC). Compared with total halogen data derived by alkaline trap sampling (Raschig-tube) and ion-chromatography analysis the reactive bromine mixing ratios allow the investigation of the conversion of HBr into reactive species due to plume chemistry with progressing plume age. The new method will be described in detail and the first results on the reactive halogen to total halogen output will be discussed (for bromine and chlorine) and compared to earlier volcanic plume chemistry model studies. References Bobrowski, N. and G. Giuffrida: Bromine monoxide / sulphur dioxide ratios in relation to volcanological observations at Mt. Etna 2006-2009. Solid Earth, 3, 433-445, 2012 Bobrowski, N., R. von Glasow, A. Aiuppa, S. Inguaggiato, I. Louban, O. W. Ibrahim and U. Platt: Reactive halogen chemistry in volcanic plumes. J. Geophys. Res., 112, 2007 Donovan A., V. Tsanev, C. Oppenheimer and M. Edmonds: Reactive halogens (BrO and OClO) detected in the plume of Soufrière Hills Volcano during an eruption hiatus. Geochem. Geophys. Geosyst., 15, 3346-3363, 2014 Rüdiger, J., N. Bobrowski, T. Hoffmann (2015), Development and application of compact denuder sampling techniques with in situ derivatization followed by gas chromatography-mass spectrometry for halogen speciation in volcanic plumes (EGU2015-2392-2), EGU General Assembly 2015

Seasonal Trace Gas Dynamics on Minerotrophic Fen Peatlands in NE-Germany

NASA Astrophysics Data System (ADS)

Giebels, Michael; Beyer, Madlen; Augustin, Jürgen; Minke, Merten; Juszczak, Radoszlav; Serba, Tomasz

2010-05-01

In Germany more than 99 % of fens have lost their carbon and nutrient sink function due to heavy drainage and agricultural land use especially during the last decades and thus resulted in compression and heavy peat loss (CHARMAN 2002; JOOSTEN & CLARKE 2002; SUCCOW & JOOSTEN 2001; AUGUSTIN et al. 1996; KUNTZE 1993). Therefore fen peatlands play an important part (4-5 %) in the national anthropogenic trace gas budget. But only a small part of drained and agricultural used fens in NE Germany can be restored. Knowledge of the influence of land use to trace gas exchange is important for mitigation of the climate impact of the anthropogenic peatland use. We study carbon exchanges of several fen peatland use areas between soil and atmosphere at different sites in NE-Germany. Our research covers peatlands of supposed strongly climate forcing land use (cornfield and intensive pasture) and of probably less forcing, alternative types (meadow and extensive pasture) as well as rewetted (formerly drained) areas and near-natural sites like a low-degraded fen and a wetted alder woodland. We measured trace gas fluxes with manual and automatic chambers in periodic routines since spring 2007. The used chamber technique bases on DROESLER (2005). In total we now do research at 22 sites situated in 5 different locations covering agricultural, varying states of rewetted and near-natural treatments. We present results of at least 2 years of measurements and show significant differences in their annual trace gas balances depending on the genesis of the observed sites and the seasonal dynamics. Crosswise comparison of different site treatments combined with the seasonal environmental observations give good hints for the identification of main flux driving parameters. That is that a reduced intensity in land use as a supposed mitigating treatment did not show the expected effect, though a normal meadow treatment surprisingly resulted in the lowest balances in both years. For implementing a further trace gas flux model observations will proceed at least until the end of year 2011. Regarding restoration sites we present newly installed locations of observing especially methane fluxes. To assure our results (presented at last years EGU conference, GIEBELS et al. 2009) from our in 2005 rewetted site we started observations at sites with advanced states of rewetting and alternative management respectively. I.e. one alternative aim to mitigate the heavy methane efflux after rewetting is observed at a site with removed canopy. Other experiments are conducted by freshly reforested alders and reed grass. References: Augustin, J., Merbach, W., Käding, H., Schnidt, W. & Schalitz, G. 1996. Lachgas- und Methanemissionen aus degradierten Niedermoorstandorten Nordostdeutschlands unter dem Einfluß unterschiedlicher Bewirtschaftung. Alfed-Wegener-Stiftung (ed.): Von den Ressourcen zum Recycling: Geoanalytik-Geomanagement-Geoinformatik. Ernst & Sohn Verlag. Berlin Charman, D. 2002: Peatland and environmental change. John Wiley & Sons, LTD, Chichester Droesler, M. 2005. Trace Gas Exchange and climatic relevance of bog ecosystems, Southern Germany, phD-thesis, TU München, München Giebels, M., Augustin, J., Minke, M., Halle, E., Beyer, M., Ehrig, B., Leitholdt, E., Chojnicki, B., Juszczak, R., Serba, T. 2009. Anthropogenic impact on the carbon cycle of fen peatlands in NE-Germany, EGU General Assembly 2009 Joosten, H. & Clarke, D. 2002: Wise use of mires and peatlands-background and principles including a framework for decision-making. International Mire Conservation Group and International Peat Society (eds.), Finland Kuntze 1993: Moore als Senken und Quellen für C und N, Mitt. Deutsche Bodenkundliche Gesellschaft 69, 277-280 Succow, M. & Joosten, H. 2001: Landschaftsökologische Moorkunde, 2nd edition, Schweizerbart'sche Verlagsbuchhandlung, Stuttgart

Seasonal Carbon Dynamics on Selected Fen Peatland Sites in NE-Germany

NASA Astrophysics Data System (ADS)

Giebels, Michael; Beyer, Madlen; Augustin, Jürgen; Minke, Merten; Juszczak, Radoszlav; Serba, Tomasz

2010-05-01

In Germany more than 99 % of fens have lost their carbon and nutrient sink function due to heavy drainage and agricultural land use especially during the last decades and thus resulted in compression and heavy peat loss (CHARMAN 2002; JOOSTEN & CLARKE 2002; SUCCOW & JOOSTEN 2001; AUGUSTIN et al. 1996; KUNTZE 1993). Therefore fen peatlands play an important part (4-5 %) in the national anthropogenic trace gas budget. But only a small part of drained and agricultural used fens in NE Germany can be restored. Knowledge of the influence of land use to trace gas exchange is important for mitigation of the climate impact of the anthropogenic peatland use. We study carbon exchanges of several fen peatland use areas between soil and atmosphere at different sites in NE-Germany. Our research covers peatlands of supposed strongly climate forcing land use (cornfield and intensive pasture) and of probably less forcing, alternative types (meadow and extensive pasture) as well as rewetted (formerly drained) areas and near-natural sites like a low-degraded fen and a wetted alder woodland. We measured trace gas fluxes with manual and automatic chambers in periodic routines since spring 2007. The used chamber technique bases on DROESLER (2005). In total we now do research at 22 sites situated in 5 different locations covering agricultural, varying states of rewetted and near-natural treatments. We present results of at least 2 years of measurements and show significant differences in their annual carbon balances depending on the genesis of the observed sites and the seasonal dynamics. Crosswise comparison of different site treatments combined with the seasonal environmental observations give good hints for the identification of main flux driving parameters. That is that a reduced intensity in land use as a supposed mitigating treatment did not show the expected effect, though a normal meadow treatment surprisingly resulted in the lowest CO2 balances in both years. For implementing a further trace gas flux model observations will proceed at least until the end of year 2011. Regarding restoration sites we present newly installed locations of observing especially methane fluxes. To assure our results (presented at last years EGU conference, GIEBELS et al. 2009) from our in 2005 rewetted site we started observing carbon exchange at sites with advanced states of rewetting and alternative management respectively. I.e. one alternative aim to mitigate the heavy methane efflux after rewetting is observed at a site with removed canopy. Other experiments are conducted by freshly reforested alders and reed grass. References: Augustin, J., Merbach, W., Käding, H., Schnidt, W. & Schalitz, G. 1996. Lachgas- und Methanemissionen aus degradierten Niedermoorstandorten Nordostdeutschlands unter dem Einfluß unterschiedlicher Bewirtschaftung. Alfed-Wegener-Stiftung (ed.): Von den Ressourcen zum Recycling: Geoanalytik-Geomanagement-Geoinformatik. Ernst & Sohn Verlag. Berlin Charman, D. 2002: Peatland and environmental change. John Wiley & Sons, LTD, Chichester Droesler, M. 2005. Trace Gas Exchange and climatic relevance of bog ecosystems, Southern Germany, phD-thesis, TU München, München Giebels, M., Augustin, J., Minke, M., Halle, E., Beyer, M., Ehrig, B., Leitholdt, E., Chojnicki, B., Juszczak, R., Serba, T. 2009. Anthropogenic impact on the carbon cycle of fen peatlands in NE-Germany, EGU General Assembly 2009 Joosten, H. & Clarke, D. 2002: Wise use of mires and peatlands-background and principles including a framework for decision-making. International Mire Conservation Group and International Peat Society (eds.), Finland Kuntze 1993: Moore als Senken und Quellen für C und N, Mitt. Deutsche Bodenkundliche Gesellschaft 69, 277-280 Succow, M. & Joosten, H. 2001: Landschaftsökologische Moorkunde, 2nd edition, Schweizerbart'sche Verlagsbuchhandlung, Stuttgart

Improving modelled impacts on the flowering of temperate fruit trees in the Iberian Peninsula of climate change projections for 21st century

NASA Astrophysics Data System (ADS)

Ruiz-Ramos, Margarita; Pérez-Lopez, David; Sánchez-Sánchez, Enrique; Centeno, Ana; Dosio, Alessandro; Lopez-de-la-Franca, Noelia

2013-04-01

Flowering of temperate trees needs winter chilling, being the specific requirements dependent on the variety. This work studied the trend and changes of values of chilling hours for some representative agricultural locations in Spain for the last three decades and their projected changes under climate change scenarios. According to our previous results (Pérez-López et al., 2012), areas traditionally producing fruit as the Ebro (NE of Spain) or Guadalquivir (SO) valleys, Murcia (SE) and Extremadura (SO) could have a major cold reduction of chill-hours. This would drive a change of varieties or species and may enhance the use of chemicals to complete the needs of chill hours for flowering. However, these results showed high uncertainty, partly due to the bias of the climate data used, generated by Regional Climate Models. The chilling hours were calculated with different methods according to the species considered: North Carolina method (Shaltout and Unrath, 1983) was used for apples, Utah method (Richardson et al. 1974) for peach and grapevine and the approach used by De Melo-Abreu et al. (2004) for olive trees. The climate data used as inputs were the results of numerical simulations obtained from a group of regional climate models at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/) first bias corrected for temperatures and precipitation (Dosio and Paruolo, 2011; Dosio et al., 2012). This work aims to improve the impact projections obtained in Pérez-López et al. (2012). For this purpose, variation of chill-hours between 2nd half of 20th century and 1st half of 21st century at the study locations were recalculated considering 1) a feedback in the dates in which the chilling hours are calculated, to take into account the shift of phenological dates, and 2) substituting the original ENSEMBLES data set of climate used in Pérez-López et al. (2012) by the bias corrected data set. Calculations for the 2nd half of 20th century will be used to evaluate the quality of the new data set of projections. Acknowledgements This research has been funded by project PEII10-0248-5680 from Junta de Comunidades de Castilla-La Mancha, Spain. References De Melo-Abreu, J. P. Barranco D. Cordeiro, A. M. Tous, J. Rogado, B. M. Villalobos, F. J. 2004. Modelling olive flowering date using chilling for dormancy release and thermal time. Agricultural and Forest Meteorology, 125: 117-127. Dosio A. and Paruolo P., 2011. Bias correction of the ENSEMBLES high-resolution climate change projections for use by impact models: Evaluation on the present climate . Journal of Geophysical Research, VOL. 116, D16106, doi:10.1029/2011JD015934 Dosio A., Paruolo P. and Rojas R., 2012. Bias correction of the ENSEMBLES high resolution climate change projections for use by impact models: Analysis of the climate change signal. Journal of Geophysical Research, Volume 117, D17, doi: 10.1029/2012JD017968 Herrera et. al. (2012) Development and Analysis of a 50 year high-resolution daily gridded precipitation dataset over Spain (Spain02). International Journal of Climatology 32:74-85 DOI: 10.1002/joc.2256. Pérez-López; D., Ruiz-Ramos, M., Sánchez-Sánchez. E., Centeno A., Prieto-Egido, I., and López-de-la-Franca, N., 2012. Influence of climate change on the flowering of temperate fruit trees. Geophysical Research Abstracts Vol. 14, EGU2012-5774, EGU General Assembly 2012. Richardson, E.A. Seeley, S.D. Walker, D.R. 1974. A model for estimating the completion of rest for 'Redhaven' and 'Elberta' peach trees. HortScience, 9: 331-332. Shaltout, A.D. Unrath, C. r. 1983. Rest completion prediction model for 'Starkrimson Delicious' apples. J. Amer. Soc. Hort. Sci., 108: 957-961.

Instrumentation by accelerometers and distributed optical fiber sensors of a real ballastless track structure

NASA Astrophysics Data System (ADS)

Chapeleau, Xavier; Cottineau, Louis-Marie; Sedran, Thierry; Cailliau, Joël; Gueguen, Ivan; Dumoulin, Jean

2015-04-01

While relatively expensive to build, ballastless track structures are presently seen as an attractive alternative to conventional ballast. Firstly, they are built quickly since the slabs can be cast in place in an automated fashion by a slipform paver. Secondly, with its service life of at least 60 years, they requires little maintenance and hence they offers great availability. Other reasons for using ballastless tracks instead of ballasted tracks are the lack of suitable ballast material and the need of less noise and vibration for high-speed, in particularly. In the framework of a FUI project (n° 072906053), a new ballastless track structure based on concrete slabs was designed and its thermal-mechanical behavior in fatigue under selected mechanical and thermal conditions was tested on a real scale mockup in our laboratory [1,2]. By applying to the slabs both together mechanical stresses and thermal gradients, finite elements simulation and experimental results show that the weather conditions influence significantly the concrete slabs curvatures and by the way, the contact conditions with the underlaying layers. So it is absolutely necessary to take into account this effect in the design of the ballastless track structures in order to guarantee a long target life of at least of 50 years. After design and experimental tests in laboratory, a real ballastless track structure of 1km was built in France at the beginning of year 2013. This structure has 2 tracks on which several trains circulate every day since the beginning of year 2014. Before the construction, it was decided to monitor this structure to verify that the mechanical behavior is conform to the simulations. One part of the instrumentation is dedicated to monitor quasi-continuously the evolution of the curvature of a concrete slab. For this, 2 accelerometers were fixed on the slab under the track. One was placed on the edge and the other in the middle of the slab. The acquisition of the signals by a nano computer (called Pegase and developed at Ifsttar for data acquisition [3]) were performed automatically every time that a threshold is exceeded due to the passage of a train. These data are then send to a web server via a 3G Wireless Network. Many data was thus stored daily for several months. Moreover, several thermocouples were embedded at different depths in order to measure thermal gradients into the track slab. From the accelerometers signals, the deflection of the track slab are then obtained and compared to the measurements of thermal gradients. This comparison show clearly the daily evolution of the curvature with the thermal gradient changes as estimated by the simulation. This result was confirmed indirectly by strain profile measurements obtained by the Rayleigh fiber optic sensing technique. Two fiber optics embedded in the upper and lower part of the foundation slab show that contact conditions between the foundation slab and the track slab change with thermal gradient. 1 - X. Chapeleau, T. Sedran, L.-M. Cottineau, J. Cailliau, F. Taillade, I. Gueguen, J.-M. Henault. Study of ballastless track structure monitoring by distributed optical fiber sensors on a real-scale mockup in laboratory. Engineering Structures, 2013, 56, pp. 1751-1757. 2 - X. Chapeleau, L.-M. Cottineau, T. Sedran, J. Cailliau, I. Gueguen. Instrumentation by distributed optical fiber sensors of a new ballastless track structure. EGU General Assembly 2013, held 7-12 April, 2013 in Vienna, Austria, id. EGU2013-8946 3 - V. Le Cam, L. Lemarchand, L-M. Cottineau and F. Bourquin. Design of a generic smart and wireless sensors network - benefits of emerging technologies. Structural Health Monitoring 2008, 1(1), pp. 598-605.

Mechanism of secular increasing of mean gravity in Northern hemisphere and secular decreasing of mean gravity in Southern hemisphere

NASA Astrophysics Data System (ADS)

Barkin, Yu. V.; Ferrandiz, J. M.

2009-04-01

Mechanism. To present time the observant data in various geosciences more and more confidently testify for the benefit of existence of secular drift of the Earth core in the direction of North Pole. 1). So the superfluous mass of a displaced core relatively to elastic mantle, obviously, results in displacement of the centre of mass of the Earth with respect to basic system of coordinates on a surface of the Earth also in northern direction. Methods of a space geodesy let us confidently to determine drift of the centre of mass to the north with velocity about 0.5 - 1.0 cm/yr. The fundamental phenomenon of drift of the centre of mass and the core of the Earth has been predicted in 1995 (Barkin, 1995) at the analysis of secular change of the pear-shaped form of the Earth in present epoch (velocity of drift of the centre of mass of the Earth was appreciated in 1.8 +/-1.0 cm/yr in the direction of North Pole of the Earth). For an explanation of observably drift of the centre of mass at once the model of drift of the core was offered and the geodynamic model of forced relative displacements and wanderings of interacting shells of the Earth under action of a gravitational attraction of external celestial bodies (Barkin, 1996, 2002) has been developed. 2). The core makes slow secular drift and cyclic displacements. Predicted spectrum of oscillations of the centre of mass of the Earth and its core (Barkin, 2001) has received precise confirmation as a result of the Fourier analysis of temporal series for coordinates of a geocenter (Kaftan, Tatevian, 2003; Barkin, Vilke, 2004; Barkin, Lyubushin, Zotov, 2007). 3). The displaced core makes active all bouquet of natural processes in all shells of the Earth (including an atmosphere, ocean and internal shells), varying in the certain rhythms and styles the tension conditions of shells, their thermodynamic conditions etc. The core as though "conducts" by all planetary processes at once. From here take the origin such fundamental phenomena as cyclicity and synchronism of planetary natural processes, inversion of activity of natural processes in opposite hemispheres. Numerous confirmations give the extensive data of every possible geophysical observations. The phenomenon of synchronism in annual variations of activity of various natural processes is rather brightly expressed - their phases are precisely synchronized, and the periods of extreme activity (or passivity) fall to February - March or August - September. In daily variations of natural processes similar laws are observed. Here we speak about modern processes, but similar laws take place in various time scales, including geological. In the given report we shall concentrate on the analysis of possible secular variations of a gravity at displacement of an external core (of its centre of mass) relatively to the elastic mantle. The analysis has shown, that gravitational influence of displaced superfluous mass of the core are a major factor of secular variations of a gravity. However the displaced core causes directed redistribution of atmospheric masses from a southern hemisphere in northern, and also complex slow redistribution of oceanic masses. Increase of loading of atmospheric and oceanic masses on an elastic crust of northern hemisphere results in its slow lowering. Return processes should observed in a southern hemisphere. All listed factors, certainly, directly influence variations of a gravity. In a more comprehensive sense redistribution of all fluid masses, including climatic character also result in changes of a gravity. Hemispheres mean secular trends of gravity. For an estimation of a role of factors of redistribution of air and fluid masses in variations of a gravity the point model of redistribution of masses of the Earth (Barkin, 2001), obtained very effective applications at studying of fundamental problems of geodynamics, has been used. Let's emphasize, that the Earth is active dynamic object at which activity in the certain regions (for example, in subduction zones, a hilly terrain, a zone of volcanism etc.) at times is more brightly shown. Therefore the steadfast attention should be paid to local factors of changes of a gravity. In result the phenomenon of inversion changes of a gravity in northern and southern hemispheres has been predicted: mean value of a gravity in northern hemisphere accrues with velocity 1.36 micro gals in year (mGal), and in southern decreases with the same velocity. Secular variations of a gravity depend from latitude and on equator (within the framework of considered model) change a sign: dg=2.72tsinф micro gals in year (mGal), where ф is a latitude of a place of observations, t is the time in years (Barkin, 2005). The data of gravimetric measurements at the European stations: Metsahovi, Potsdam, Moha, Vienna, Wettzell, Strastburg, Medicina etc., in Asia and Australia: Eshashi, Canberra etc., in Northern and South America: Bolder (Colorado), Patagonia (Argentina) etc., and also in Antarctic Region (station Syowa), will well be coordinated to the theoretical values of secular variations of a gravity predicted earlier at the specified stations. Gravity trends are studied and evaluated after removal effects of tides, local pressure and polar motion. The secular gravity variation at Potsdam is evaluated in 2.1 mGal/yr. During 1976-1986 the similar tendency - gravity trend with velocity 2.6 mGal/yr (absolute measurements) here have been observed. The similar tendency has been determined on measurements on superconducting gravimeters during 1993-1997: 2.3-2.5 mGal/yr (Neumeyer and Dittfeled, 1997). For more extensive period of observation (Neumayer, 2002) the similar result for gravity trend has been obtained. Observable annual variations of a gravity are characterized by amplitude about 3 mGal (on our model it is 3.5 mGal). Observations at Syowa station have been confirmed the developed model. Here it was expected negative gravity trend - decreasing of gravity with velocity -2.54 mGal/yr, that have actually confirmed SG observations during 1995-1998: -2.4 mGal/yr (Sato et al., 2001). Amplitudes of an annual and semi-annual variations approximately make 4.8 mGal/yr and 0.8 mGal/yr (theoretical values: 4.2 mGal/yr and 0.95 mGal/yr). References Barkin Yu.V. (2002) Explanation of endogenous activity of planets and satellites and its cyclicity. Izvestia cekzii nauk o Zemle. Rus. Acad. of Nat. Sciences, Issue 9, December 2002, M.: VINITI, pp. 45-97. In Russian. Barkin Yu.V., Ferrandiz J.M. (2008) Phenomenon of secular increasing of mean gravity in Northern hemisphere and secular decreasing of gravity in Southern hemisphere; predictions and new confirmations. EGU General Assembly (Vienna, Austria, 13-18 April 2008). Geophysical Research Abstracts, EGU General Assembly 2008. Vol. 10, EGU2008-A-10506.

Building a World Fit for Children: The United Nations General Assembly Special Session on Children, 8-10 May, 2002.

ERIC Educational Resources Information Center

United Nations Children's Fund, New York, NY.

The United Nations Special Session on Children in May, 2002, was a landmark for children and human developmentthe first Special Session of the General Assembly devoted exclusively to children and the first to include them as official delegates. Participants came together to assess the progress made toward achieving the goals of the 1990 World…

General view of the Solid Rocket Booster's (SRB) Solid Rocket ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Solid Rocket Booster's (SRB) Solid Rocket Motor Segments in the Surge Building of the Rotation Processing and Surge Facility at Kennedy Space Center awaiting transfer to the Vehicle Assembly Building and subsequent mounting and assembly on the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

On School Bus Safety. Report of the Department of Education to the Governor and the General Assembly of Virginia. House Document No. 10.

ERIC Educational Resources Information Center

Virginia State General Assembly, Richmond. House.

An advisory committee, in response to a 1985 resolution by the Virginia General Assembly, presents this analysis and makes recommendations concerning state school bus safety. The report is divided into eight topics; six appendices comprise three-fourths of the study. "Origin of the Study" states requests to be investigated by the…

Instrumentation and monitoring of the nextgen road infrastructure: Some results and perspectives from the R5G project

NASA Astrophysics Data System (ADS)

Hautière, Nicolas; Bourquin, Frédéric

2017-04-01

Through the centuries, the roads - which today constitute in France a huge transport network of 1 millions kilometers length - have always been able to cope with society needs and challenges. As a consequence, the next generation road infrastructure will have to take into account at least three societal transitions: ecological, energetic and digital. The goal of the 5th generation road project (R5G©) [1], led by Ifsttar in France, aligned with the Forever Open program [2], is to design and build demonstrators of such future road infrastructures. The goal of this presentation is to present different results related to the greening of road materials [3], the design of energy-positive roads [4, 5], the test of roads that self-diagnose [6], the design of roads adapted for connected [7], autonomous [8] and electrified vehicles [9], etc. In terms of perspectives, we will demonstrate that the road infrastructures will soon become a complex system: On one side road users will benefit from new services, on the other side such massively connected and instrumented infrastructures will potentially become an opportune sensor for knowledge development in geoscience, such as air quality, visibility and fog monitoring. References: [1] R5G project. r5g.ifsttar.fr [2] Forever Open Road project. www.foreveropenroad.eu [3] Biorepavation project. www.infravation.net/projects/BIOREPAVATION [4] N. Le Touz, J. Dumoulin. Numerical study of the thermal behavior of a new deicing road structure design with energy harvesting capabilities. EGU General Assembly 2015, Apr 2015, Vienne, Austria. [5] S. Asfour, F. Bernardin, E. Toussaint, J.-M. Piau. Hydrothermal modeling of porous pavement for its surface de-freezing. Applied Thermal Engineering. Volume 107, 25 August 2016, Pages 493-500 [6] LGV BPL Instrumentation. http://railenium.eu/wp-content/uploads/2016/08/INSTRUMENTATION-BPL-FR.pdf [7] SCOOP@F project. https://ec.europa.eu/inea/en/connecting-europe-facility/cef-transport/projects-by-country/multi-country/2014-eu-ta-0669-s [8] J. Ehrlich, D. Gruyer, O. Orfila, N. Hautière. Autonomous vehicle : The concept of high quality of service highway. FISITA World congress, Busan, Korea, 2016. [9] FABRIC project. www.fabric-project.eu

Hydromorphological Datamanagement - From Fieldwork to Database

NASA Astrophysics Data System (ADS)

Stadler, Philipp; Steinwendner, Norbert; Prüller, Stefan; Millauer, Isabell; Pröll, Elmar

2010-05-01

Since 2008 a hydromorphological survey and mapping of semi natural brooks is done at the National Park Kalkalpen in Upper Austria. In addition to the water-documentation programme running at the Nationalpark Kalkalpen there is the request to classify the hydromorphological situation (especially level of anthropogenic interaction and grade of renaturation) of small and midsize semi natural brooks. The system of mapping which was developed during the pilot mapping in 2008 realigns an instruction for a European water framework directive compatible hydromorphological mapping of streams (Lebensministerium 2006). As presented before this allows a consistent and representative exposition of the hydromorphological situation of creeks and brooks (Stadler 2009). Picturing the channel's naturalness is the main parameter, other value was set on typical riverbed structures and torrent control buildings. In order to allow an efficient field work a clearly arranged mapping-schedule was developed. With this schedule a consistent and representative mapping out of the brook's characteristic is possible. Due to the steep and overgrown valleys of the National Park interpretation of remote sensing material is not suitable. Therefore fieldwork becomes the most important basis for data acquisition. Detailed hydromorphological parameters are marked in a schedule for every 500 meter intercept of the stream. In order to manage the recorded field data, a database was designed which handles not only the parameters of every scheduled intercept, but also gives an overview of all mapped brooks in the National Park area. Focus was set on the possibility to display point data (torrent control buildings) on the one side and integrated hydromorphological parameters (grade of naturalness) on the other side. With the developed MS Access database an administration was aimed which can be used not only for the running hydromorphological survey, but also for other stream linked surveys (e.g. hydrochemistry, biology). This enables to merge hydromorphological data with other GIS available data, like the valley's topography. The congruent correlation of the database's Ids with a GIS is the rudiment for an efficient data management and -presentation. References LEBENSMINISTERIUM (2006): Bereich Wasser. A-Fliessgewässer Hydromorphologie, Leitfaden für die hydromorphologische Zustandserhebung, 46 Seiten, Wien STADLER, Philipp (2009): Hydromorphological classification of semi-natural brooks in National Park Kalkalpen, European Geosciences Union General Assembly 2009, EGU 2009-2216 GM8.2/15, Vienna

TRMM Version 7 Level 3 Gridded Monthly Accumulations of GPROF Precipitation Retrievals

NASA Technical Reports Server (NTRS)

Stocker, E. F.; Kelley, O. A.

2012-01-01

In July 2011, improved versions of the retrieval algorithms were approved for TRMM. All data starting with June 2011 are produced only with the version 7 code. At the same time, version 7 reprocessing of all TRMM mission data was started. By the end of August 2011, the 14+ years of the reprocessed mission data became available online to users. This reprocessing provided the opportunity to redo and enhance upon an analysis of V7 impacts on L3 data accumulations that was presented at the 2010 EGU General Assembly. This paper will discuss the impact of algorithm changes made in th GPROF retrieval on the Level 2 swath products. Perhaps the most important change in that retrieval was to replacement of a model based a priori database with one created from Precipitation Radar (PR) and TMI brightness temperature (Tb) data. The radar pays a major role in the V7 GPROF (GPROF2010) in determining existence of rain. The level 2 retrieval algorithm also introduced a field providing the probability of rain. This combined use of the PR has some impact on the retrievals and created areas, particularly over ocean, where many areas of low-probability precipitation are retrieved whereas in version 6, these areas contained zero rain rates. This paper will discuss how these impacts get translated to the space/time averaged monthly products that use the GPROF retrievals. The level 3 products discussed are the gridded text product 3G68 and the standard 3A12 and 3B31 products. The paper provides an overview of the changes and explanation of how the level 3 products dealt with the change in the retrieval approach. Using the .25 deg x .25 degree grid, the paper will show that agreement between the swath product and the level 3 remains very high. It will also present comparisons of V6 and V7 GPROF retrievals as seen both at the swath level and the level 3 time/space gridded accumulations. It will show that the various L3 products based on GPROF level 2 retrievals are in close agreement. The paper concludes by outlining some of the challenges of the TRMM version 7 level 3 products.

Cooperativity in self-limiting equilibrium self-associating systems

NASA Astrophysics Data System (ADS)

Freed, Karl F.

2012-11-01

A wide variety of highly cooperative self-assembly processes in biological and synthetic systems involve the assembly of a large number (m) of units into clusters, with m narrowly peaked about a large size m0 ≫ 1 and with a second peak centered about the m = 1 unassembled monomers. While very specific models have been proposed for the assembly of, for example, viral capsids and core-shell micelles of ß-casein, no available theory describes a thermodynamically general mechanism for this double peaked, highly cooperative equilibrium assembly process. This study provides a general mechanism for these cooperative processes by developing a minimal Flory-Huggins type theory. Beginning from the simplest non-cooperative, free association model in which the equilibrium constant for addition of a monomer to a cluster is independent of cluster size, the new model merely allows more favorable growth for clusters of intermediate sizes. The theory is illustrated by computing the phase diagram for cases of self-assembly on cooling or heating and for the mass distribution of the two phases.

Generalized superradiant assembly for nanophotonic thermal emitters

NASA Astrophysics Data System (ADS)

Mallawaarachchi, Sudaraka; Gunapala, Sarath D.; Stockman, Mark I.; Premaratne, Malin

2018-03-01

Superradiance explains the collective enhancement of emission, observed when nanophotonic emitters are arranged within subwavelength proximity and perfect symmetry. Thermal superradiant emitter assemblies with variable photon far-field coupling rates are known to be capable of outperforming their conventional, nonsuperradiant counterparts. However, due to the inability to account for assemblies comprising emitters with various materials and dimensional configurations, existing thermal superradiant models are inadequate and incongruent. In this paper, a generalized thermal superradiant assembly for nanophotonic emitters is developed from first principles. Spectral analysis shows that not only does the proposed model outperform existing models in power delivery, but also portrays unforeseen and startling characteristics during emission. These electromagnetically induced transparency like (EIT-like) and superscattering-like characteristics are reported here for a superradiant assembly, and the effects escalate as the emitters become increasingly disparate. The fact that the EIT-like characteristics are in close agreement with a recent experimental observation involving the superradiant decay of qubits strongly bolsters the validity of the proposed model.

Challenges and breakthroughs in recent research on self-assembly

PubMed Central

Ariga, Katsuhiko; Hill, Jonathan P; Lee, Michael V; Vinu, Ajayan; Charvet, Richard; Acharya, Somobrata

2008-01-01

The controlled fabrication of nanometer-scale objects is without doubt one of the central issues in current science and technology. However, existing fabrication techniques suffer from several disadvantages including size-restrictions and a general paucity of applicable materials. Because of this, the development of alternative approaches based on supramolecular self-assembly processes is anticipated as a breakthrough methodology. This review article aims to comprehensively summarize the salient aspects of self-assembly through the introduction of the recent challenges and breakthroughs in three categories: (i) types of self-assembly in bulk media; (ii) types of components for self-assembly in bulk media; and (iii) self-assembly at interfaces. PMID:27877935

Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS. NASA, John F. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS. NASA, John F. Kennedy Space Center, Florida. Drawing 79K05424, Seelye Stevenson Value & Knecht, March, 1975. SITE WORK, GENERAL AREA PLAN. Sheet 8 of 207 - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

President's Assembly--State Policy Research at the University of Illinois. Final Report.

ERIC Educational Resources Information Center

Gove, Samuel K., Ed.; Zollinger, Richard A., Ed.

The activities at the President's Assembly on State Policy Research at the University of Illinois, which was convened to explore a series of questions related to the interaction between universities and the agencies that create public policy, are reported. The report of the assembly, which is a statement representing general agreement among the…

40 CFR Appendix A to Part 97 - Final Section 126 Rule: EGU Allocations, 2004-2007

Code of Federal Regulations, 2010 CFR

2010-07-01

... W H WEATHERSPOON 2716 CT-2 3 NC W H WEATHERSPOON 2716 CT-3 2 NC W H WEATHERSPOON 2716 CT-4 4 NJ B L... KY COOPER 1384 1 183 KY COOPER 1384 2 367 KY DALE 1385 3 161 KY DALE 1385 4 158 KY E W BROWN 1355 1 193 KY E W BROWN 1355 10 37 KY E W BROWN 1355 2 317 KY E W BROWN 1355 3 863 KY E W BROWN 1355 8 34 KY...

Interactions regulating the head-to-tail directed assembly of biological Janus rods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, A. C.; Bachand, M.; Gomez, A.

We can generalize the directed, head-to-tail self-assembly of microtubule filaments in the context of Janus colloidal rods. Specifically, their assembly at the tens of micron-length scale involves a careful balance between long-range electrostatic repulsion and short-range attractive forces. We show that the addition of counterion salts increases the rate of directed assembly by screening the electrostatic forces and enhancing the effectiveness of short-range interactions at the microtubule ends.

Research study entitled advanced X-ray astrophysical observatory (AXAF). [system engineering for a total X-ray telescope assembly

NASA Technical Reports Server (NTRS)

Rasche, R. W.

1979-01-01

General background and overview material are presented along with data from studies performed to determine the sensitivity, feasibility, and required performance of systems for a total X-ray telescope assembly. Topics covered include: optical design, mirror support concepts, mirror weight estimates, the effects of l g on mirror elements, mirror assembly resonant frequencies, optical bench considerations, temperature control of the mirror assembly, and the aspect determination system.

Interactions regulating the head-to-tail directed assembly of biological Janus rods

DOE PAGES

Greene, A. C.; Bachand, M.; Gomez, A.; ...

2017-03-31

We can generalize the directed, head-to-tail self-assembly of microtubule filaments in the context of Janus colloidal rods. Specifically, their assembly at the tens of micron-length scale involves a careful balance between long-range electrostatic repulsion and short-range attractive forces. We show that the addition of counterion salts increases the rate of directed assembly by screening the electrostatic forces and enhancing the effectiveness of short-range interactions at the microtubule ends.

49 CFR 572.131 - General description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Assembly 880105-300 Lower Torso Assembly 880105-450 Complete Leg Assembly—left 880105-560-1 Complete Leg Assembly—right 880105-560-2 Complete Arm Assembly—left 880105-728-1 Complete Arm Assembly—right 880105-728...

49 CFR 572.131 - General description.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Assembly 880105-300 Lower Torso Assembly 880105-450 Complete Leg Assembly—left 880105-560-1 Complete Leg Assembly—right 880105-560-2 Complete Arm Assembly—left 880105-728-1 Complete Arm Assembly—right 880105-728...

Self-Assembly and Crystallization of Hairy (f-Star) and DNA-Grafted Nanocubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knorowski, Christopher; Travesset, Alex

Nanoparticle superlattices are key to realizing many of the materials that will solve current technological challenges. Particularly important for their optical, mechanical or catalytic properties are superlattices of anisotropic (nonspherical) nanoparticles. The key challenge is how to program anisotropic nanoparticles to self-assemble into the relevant structures. In this Article, using numerical simulations, we show that “hairy” (f-star) or DNA grafted on nanocubes provides a general framework to direct the self-assembly into phases with crystalline, liquid crystalline, rotator, or noncrystalline phases with both long-range positional and orientational order. We discuss the relevance of these phases for engineering nanomaterials or micromaterials displayingmore » precise orientational order, realization of dry superlattices as well as for the field of programmed self-assembly of anisotropic nanoparticles in general.« less

Ten steps to get started in Genome Assembly and Annotation

PubMed Central

Dominguez Del Angel, Victoria; Hjerde, Erik; Sterck, Lieven; Capella-Gutierrez, Salvadors; Notredame, Cederic; Vinnere Pettersson, Olga; Amselem, Joelle; Bouri, Laurent; Bocs, Stephanie; Klopp, Christophe; Gibrat, Jean-Francois; Vlasova, Anna; Leskosek, Brane L.; Soler, Lucile; Binzer-Panchal, Mahesh; Lantz, Henrik

2018-01-01

As a part of the ELIXIR-EXCELERATE efforts in capacity building, we present here 10 steps to facilitate researchers getting started in genome assembly and genome annotation. The guidelines given are broadly applicable, intended to be stable over time, and cover all aspects from start to finish of a general assembly and annotation project. Intrinsic properties of genomes are discussed, as is the importance of using high quality DNA. Different sequencing technologies and generally applicable workflows for genome assembly are also detailed. We cover structural and functional annotation and encourage readers to also annotate transposable elements, something that is often omitted from annotation workflows. The importance of data management is stressed, and we give advice on where to submit data and how to make your results Findable, Accessible, Interoperable, and Reusable (FAIR). PMID:29568489

Opportunities for improving legislative public health policy in Rhode Island through evidence-based education.

PubMed

Bourdeau, Moise; Winter, Ronald; Marshall, Robert

2013-10-01

The Rhode Island General Assembly considers nearly 3000 bills yearly--spanning the entire range of issues related to state government and legislative policy. This review analyzes the modest number of 40 "health-related" bills introduced during the 2009 session. It is often not clear to what extent these proposals consistently received analysis by both informed and independent organizations or experts regarding their "evidence-based" foundations. Only 25 of these bills received a committee hearing, and eventually become law. Hence, there may be a reasonable opportunity for expert, non-partisan organizations to provide the General Assembly with information related to proposed legislation on a routine or "as requested" basis. This study provides a systematic analysis of this degree of effort based on data regarding health- related legislation proposed during the 2009 session of the RI General Assembly.

Free and Open Source Software underpinning the European Forest Data Centre

NASA Astrophysics Data System (ADS)

Rodriguez Aseretto, Dario; Di Leo, Margherita; de Rigo, Daniele; Corti, Paolo; McInerney, Daniel; Camia, Andrea; San-Miguel-Ayanz, Jesús

2013-04-01

Worldwide, governments are growingly focusing [1] on free and open source software (FOSS) as a move toward transparency and the freedom to run, copy, study, change and improve the software [2]. The European Commission (EC) is also supporting the development of FOSS (see e.g., [3]). In addition to the financial savings, FOSS contributes to scientific knowledge freedom in computational science (CS) [4] and is increasingly rewarded in the science-policy interface within the emerging paradigm of open science [5-8]. Since complex computational science applications may be affected by software uncertainty [4,9-11], FOSS may help to mitigate part of the impact of software errors by CS community-driven open review, correction and evolution of scientific code [10,12-15]. The continental scale of EC science-based policy support implies wide networks of scientific collaboration. Thematic information systems also may benefit from this approach within reproducible [16] integrated modelling [4]. This is supported by the EC strategy on FOSS: "for the development of new information systems, where deployment is foreseen by parties outside of the EC infrastructure, [F]OSS will be the preferred choice and in any case used whenever possible" [17]. The aim of this contribution is to highlight how a continental scale information system may exploit and integrate FOSS technologies within the transdisciplinary research underpinning such a complex system. A European example is discussed where FOSS innervates both the structure of the information system itself and the inherent transdisciplinary research for modelling the data and information which constitute the system content. The information system. The European Forest Data Centre (EFDAC, http://forest.jrc.ec.europa.eu/efdac/) has been established at the EC Joint Research Centre (JRC) as the focal point for forest data and information in Europe to supply European decision-makers with processed, quality checked and timely policy relevant forest data and information (see also [18]). A set of web-based tools allow accessing the information located in EFDAC. The following applications - running on GNU/Linux platforms - are the core elements of EFDAC: In (a.1) a metadata client allows users to search for EFDAC related spatial datasets while (a.2) is a customized web map service that allows the user to visualize, navigate and query available maps and derived geo-datasets on several forest-related topics. The database system currently relies on ORACLE and PostgreSQL [24] with PostGIS [25]. EFFIS (a.3) [26-33] is a comprehensive system covering the full cycle of forest-fire management. The system supports forest-fire prevention and fighting in Europe, North Africa and Middle East countries through the provision of timely and reliable information on forest-fires [29,30,32]. Within EFFIS, UMN Mapserver [34] is used for the management and publication of the fire behavior forecast and the other fire-related layers in a wide range of formats including INSPIRE and Open Geospatial Consortium (OGC) standards such as: Transdisciplinary modelling research. The EFDAC portal [39] provides data and information which rely on coordinated research [40-50] on wide-scale transdisciplinary modelling for environment (WSTMe) [51]. This contributed to advanced computational modelling approaches such as morphological spatial pattern analysis (MSPA) [52-54] and geospatial semantic array programming (GeoSemAP) [51,55]. FOSS is here essential. For example, GeoSemAP is based on a semantically-enhanced [56,57] joint use of geospatial and array programming [58] tools (c) where semantic transparency also implies FOSS use. References Hahn, R. W., Bessen, J., Evans, D. S., Lessig, L., Smith, B. L., 2009. Government Policy Toward Open Source Software. Hahn, R. W. (Ed.). ISBN: 0-8157-3393-3 http://dx.doi.org/10.2139/ssrn Free Software Foundation, 2012. What is free software? http://www.gnu.org/philosophy/free-sw.html (revision 1.118 archived at http://www.webcitation.org/6DXqCFAN3 ) Kroes, N., 2010. How to get more interoperability in Europe. In: Open Forum Europe 2010 Summit - Openness at the heart of the EU Digital Agenda. No. SPEECH/10/300. European Commission press release. http://europa.eu/rapid/press-release_SPEECH-10-300_en.pdf de Rigo, D., 2013. Behind the horizon of reproducible integrated environmental modelling at European scale: ethics and practice of scientific knowledge freedom. F1000 Research. To appear as discussion paper Stallman, R. M., 2005. Free community science and the free development of science. PLoS Med 2 (2), e47+. http://dx.doi.org/10.1371/journal.pmed.0020047 Cai, Y., Judd, K. L., Lontzek, T. S., 2012. Open science is necessary. Nature Climate Change 2 (5), 299. http://dx.doi.org/10.1038/nclimate1509 Morin, A., Urban, J., Adams, P. D., Foster, I., Sali, A., Baker, D., Sliz, P., 2012. Shining light into black boxes. Science 336 (6078), 159-160. http://dx.doi.org/10.1126/science.1218263 Ince, D. C., Hatton, L., Graham-Cumming, J., 2012. The case for open computer programs. Nature 482 (7386), 485-488. http://dx.doi.org/10.1038/nature10836 Lehman, M. M., Ramil, J. F., 2002. Software uncertainty. In: Bustard, D., Liu, W., Sterritt, R. (Eds.), Soft-Ware 2002: Computing in an Imperfect World. Vol. 2311 of Lecture Notes in Computer Science. Springer Berlin / Heidelberg, Berlin, Heidelberg, Ch. 14, pp. 477-514. http://dx.doi.org/10.1007/3-540-46019-5_14 Hatton, L., 2012. Defects, scientific computation and the scientific method uncertainty quantification in scientific computing. Vol. 377 of IFIP Advances in Information and Communication Technology. Springer Boston, Berlin, Heidelberg, Ch. 8, pp. 123-138. http://dx.doi.org/10.1007/978-3-642-32677-68 de Rigo, D., 2013. Software Uncertainty in Integrated Environmental Modelling: the role of Semantics and Open Science. Geophysical Research Abstracts 15, EGU General Assembly 2013 Hatton, L., 2007. The chimera of software quality. Computer 40 (8), 104-103. http://dx.doi.org/10.1109/MC.2007.292 Cai, Y., Judd, K. L., Lontzek, T. S., May 2012. Open science is necessary. Nature Climate Change 2 (5), 299. http://dx.doi.org/10.1038/nclimate1509 Sonnenburg, S., Braun, M. L., Ong, C. S., Bengio, S., Bottou, L., Holmes, G., LeCun, Y., Müller, K. R., Pereira, F., Rasmussen, C. E., Rätsch, G., Schölkopf, B., Smola, A., Vincent, P., Weston, J., Williamson, R., Dec. 2007. The need for open source software in machine learning. J. Mach. Learn. Res. 8, 2443-2466. http://jmlr.csail.mit.edu/papers/v8/sonnenburg07a.html de Vos, M. G., Janssen, S. J. C., van Bussel, L. G. J., Kromdijk, J., van Vliet, J., Top, J. L., Dec. 2011. Are environmental models transparent and reproducible enough? In: Chan, F., Marinova, D., Anderssen, R. S. (Eds.), MODSIM2011, 19th International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand, pp. 2954-2961. http://www.mssanz.org.au/modsim2011/G7/devos.pdf Peng, R. D., 2011. Reproducible research in computational science. Science 334 (6060), 1226-1227. http://dx.doi.org/10.1126/science.1213847 European Commission, 2011. Strategy for internal use of OSS at the EC. European Commission, Directorate-General for Informatics (DIGIT). http://ec.europa.eu/dgs/informatics/oss_tech/index_en.htm (archived at: http://www.webcitation.org/6DXuBeTAU ) European Commission, 2006. European Union forest action plan. No. COM(2006) 302 final. Communication from the Commission. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=COM:2006:0302:FIN:EN:HTML Ticheler, J., Hielkema, J. U., 2007. GeoNetwork opensource. OSGeo Journal 2, 1-5. http://journal.osgeo.org/index.php/journal/article/viewFile/86/69 European Parliament, 2007. Directive 2007/2/EC of the European Parliament and of the Council of 14 march 2007 establishing an infrastructure for spatial information in the european community (INSPIRE). Official Journal of the European Union 50 (L 108), 1-14. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2007:108:0001:0014:EN:PDF European Commission, 2008. Commission regulation (EC) no 1205/2008 of 3 december 2008 implementing directive 2007/2/EC of the european parliament and of the council as regards metadata. Official Journal of the European Union 51 (L 326), 12-30. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:326:0012:0030:EN:PDF Hazzard, E., 2011. Openlayers 2.10 beginner's guide. Packt Publishing. ISBN: 9781849514125 Holovaty, A., Kaplan-Moss, J., 2009. The definitive guide to Django: Web development done right. Apress (distributed by Springer-Verlag). ISBN: 9781590597255. http://dl.acm.org/citation.cfm?id=1572516 Worsley, J. C., Drake, J. D., 2002. Practical PostgreSQL: a hardened, robust, open source database. O'Reilly. ISBN: 1565928466. http://dl.acm.org/citation.cfm?id=580258 Obe, R., Hsu, L., 2011. PostGIS in Action. Manning Publications. ISBN:1935182269. http://dl.acm.org/citation.cfm?id=2018871 San-Miguel-Ayanz, J., 2010. Wildfires in Europe: The analysis of past and future trends within the European Forest Fire Information System. In: EGU General Assembly Conference Abstracts. Vol. 12 of EGU General Assembly Conference Abstracts. pp. 15401+. http://meetingorganizer.copernicus.org/EGU2010/EGU2010-15401.pdf Camia, A., Durrant Houston, T., San-Miguel-Ayanz, J., 2010. The European fire database: development, structure and implementation. In: 6th International Conference on Forest Fire Research. No. A20. Coimbra, Portugal Whitmore, C., Camia, A., San-Miguel-Ayanz, J., 2010. Enhancing the European Forest Fire Information System (EFFIS) with open source software. In: FOSS4G 2010. Barcelona, Spain. http://2010.foss4g.org/presentations_show.php?id=3693 San-Miguel-Ayanz, J., Schulte, E., Schmuck, G., Camia, A., 2012. The European Forest Fire Information System in the context of environmental policies of the European Union. Forest Policy and Economics. http://dx.doi.org/10.1016/j.forpol.2011.08.012 San-Miguel-Ayanz, J., Schulte, E., Schmuck, G., Camia, A., Strobl, P., Liberta, G., Giovando, C., Boca, R., Sedano, F., Kempeneers, P., McInerney, D., Withmore, C., de Oliveira, S. S., Rodrigues, M., Durrant, T., Corti, P., Oehler, F., Vilar, L., Amatulli, G., 2012. Comprehensive monitoring of wildfires in Europe: The European Forest Fire Information System (EFFIS). In: Tiefenbacher, J. (Ed.), Approaches to Managing Disaster - Assessing Hazards, Emergencies and Disaster Impacts. InTech, Ch. 5. http://dx.doi.org/10.5772/28441 Giovando, C., Whitmore, C., Camia, A., San-Miguel-Ayanz, J., 2010. Enhancing the European forest fire information system (EFFIS) with open source software. In: FOSS4G 2010. http://2010.foss4g.org/presentations_show.php?id=3693 Corti, P., San-Miguel-Ayanz, J., Camia, A., McInerney, D., Boca, R., Di Leo, M., 2012. Fire news management in the context of the European Forest Fire Information System (EFFIS). In: proceedings of "Quinta conferenza italiana sul software geografico e sui dati geografici liberi" (GFOSS DAY 2012). http://dx.doi.org/10.6084/m9.figshare.101918 Amatulli, G., Camia, A., 2007. Exploring the relationships of fire occurrence variables by jeans of CART and MARS models. In: Proceedings of the 4th International Wildland Fire Conference, Sevilla, Spain, 13-18 May 2007. http://www.fire.uni-freiburg.de/sevilla-2007/contributions/doc/cd/SESIONES_TEMATICAS/ST4/Amatulli_Camia_ITALY.pdf MapServer, http://mapserver.org/ Open Geospatial Consortium, 2006. OpenGIS Web Map Service version 1.3.0. No. OGC 06-042 in OpenGIS Standard. Open Geospatial Consortium (OGC). http://portal.opengeospatial.org/files/?artifact_id=14416 http://www.opengeospatial.org/standards/wms

Agents, assemblers, and ANTS: scheduling assembly with market and biological software mechanisms

NASA Astrophysics Data System (ADS)

Toth-Fejel, Tihamer T.

2000-06-01

Nanoscale assemblers will need robust, scalable, flexible, and well-understood mechanisms such as software agents to control them. This paper discusses assemblers and agents, and proposes a taxonomy of their possible interaction. Molecular assembly is seen as a special case of general assembly, subject to many of the same issues, such as the advantages of convergent assembly, and the problem of scheduling. This paper discusses the contract net architecture of ANTS, an agent-based scheduling application under development. It also describes an algorithm for least commitment scheduling, which uses probabilistic committed capacity profiles of resources over time, along with realistic costs, to provide an abstract search space over which the agents can wander to quickly find optimal solutions.

General view of the Aft Solid Rocket Motor Segment mated ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Solid Rocket Motor Segment mated with the Aft Skirt Assembly and External Tank Attach Ring in the Rotation Processing and Surge Facility at Kennedy Space Center and awaiting transfer to the Vehicle Assembly Building where it will be mounted onto the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

The 1996 General Assembly Session. A Summary of 1996 Higher Education-Related Legislation & Appropriations. Staff Technical Report No. 96-01.

ERIC Educational Resources Information Center

Virginia State Council of Higher Education, Richmond.

This is a summary of the 120 bills and resolutions related to higher education and passed by the 1996 session of the Virginia General Assembly. Bills address issues affecting all of Virginia higher education as well as those specifically affecting the Council of Higher Education. Brief summaries of each bill follow a listing of all the higher…

General view in the transfer aisle of the Vehicle Assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view in the transfer aisle of the Vehicle Assembly Building at Kennedy Space Center looking at one of a pair of Aft Center Segments of the Solid Rocket Motor of the Solid Rocket Booster awaiting hoisting and mating to the Solid Rocket Booster's Aft Segment on the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

SpRoUTS (Space Robot Universal Truss System): Reversible Robotic Assembly of Deployable Truss Structures of Reconfigurable Length

NASA Technical Reports Server (NTRS)

Jenett, Benjamin; Cellucci, Daniel; Cheung, Kenneth

2015-01-01

Automatic deployment of structures has been a focus of much academic and industrial work on infrastructure applications and robotics in general. This paper presents a robotic truss assembler designed for space applications - the Space Robot Universal Truss System (SpRoUTS) - that reversibly assembles a truss from a feedstock of hinged andflat-packed components, by folding the sides of each component up and locking onto the assembled structure. We describe the design and implementation of the robot and show that the assembled truss compares favorably with prior truss deployment systems.

76 FR 64287 - Airworthiness Directives; General Electric Company CF34-10E Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... escape. Once removed, the CVD support assembly (consisting of self-locking nut, part number (P/N... location. The wear is caused by relative motion between the CVD support assembly (consisting of self... AD, do not return to service any CVD support assembly (consisting of self-locking nut, P/N 2226M57G03...

Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS. NASA John F. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS. NASA John F. Kennedy Space Center, Florida. File Number 79K05424, Seelye Stevenson Value & Knecht, March 1975. ALL PLATFORMS-ARCHITECTURAL, GENERAL ARRANGEMENT, EAST-WEST ELEVATIONS. Sheet 12 of 207 - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

An Assembly Funnel Makes Biomolecular Complex Assembly Efficient

PubMed Central

Zenk, John; Schulman, Rebecca

2014-01-01

Like protein folding and crystallization, the self-assembly of complexes is a fundamental form of biomolecular organization. While the number of methods for creating synthetic complexes is growing rapidly, most require empirical tuning of assembly conditions and/or produce low yields. We use coarse-grained simulations of the assembly kinetics of complexes to identify generic limitations on yields that arise because of the many simultaneous interactions allowed between the components and intermediates of a complex. Efficient assembly occurs when nucleation is fast and growth pathways are few, i.e. when there is an assembly “funnel”. For typical complexes, an assembly funnel occurs in a narrow window of conditions whose location is highly complex specific. However, by redesigning the components this window can be drastically broadened, so that complexes can form quickly across many conditions. The generality of this approach suggests assembly funnel design as a foundational strategy for robust biomolecular complex synthesis. PMID:25360818

Assembly of metals and nanoparticles into novel nanocomposite superstructures

PubMed Central

Xu, Jiaquan; Chen, Lianyi; Choi, Hongseok; Konish, Hiromi; Li, Xiaochun

2013-01-01

Controlled assembly of nanoscale objects into superstructures is of tremendous interests. Many approaches have been developed to fabricate organic-nanoparticle superstructures. However, effective fabrication of inorganic-nanoparticle superstructures (such as nanoparticles linked by metals) remains a difficult challenge. Here we show a novel, general method to assemble metals and nanoparticles rationally into nanocomposite superstructures. Novel metal-nanoparticle superstructures are achieved by self-assembly of liquid metals and nanoparticles in immiscible liquids driven by reduction of free energy. Superstructures with various architectures, such as metal-core/nanoparticle-shell, nanocomposite-core/nanoparticle-shell, network of metal-linked core/shell nanostructures, and network of metal-linked nanoparticles, were successfully fabricated by simply tuning the volume ratio between nanoparticles and liquid metals. Our approach provides a simple, general way for fabrication of numerous metal-nanoparticle superstructures and enables a rational design of these novel superstructures with desired architectures for exciting applications.

The Young Scientist Club of the International Association for Promoting Geoethics - Promoting geoethics among the young geoscientists community

NASA Astrophysics Data System (ADS)

Charrière, Marie; De Pascale, Francesco; Gomez Cantero, Jonathan; Hassan, Tharwat; Mukosi, Ndivhuwo Cecilia; O'Brien, Craig

2016-04-01

The International Association for Promoting Geoethics (IAPG) is a multidisciplinary, scientific platform for the debate on problems of Ethics applied to the Geosciences. The Young Scientists Club (YSC) of the IAPG represents the interface between the IAPG and the young geoscientists' community, organizations and groups. Its overall goal is to promote the topic of geoethics and the IAPG among its young colleagues. The YSC is considered to be the outpost of the IAPG and one of its greater strengths. It is believed that young people entering the professional world or evolving in academic settings can identify needs and expectations that geosciences can cover. The YSC seeks to give a status update on pertinent geoscience challenges and how geoethical principles can be integrated in tackling these challenges. They can also report new instances from the society and identify the potential innovative contributions that geosciences can provide as a service to the population. The YSC was initiated in the summer 2015. All IAPG members younger than 35 years old are part of the YSC. Its Executive Board is constituted by enthusiastic young geoscientists from various backgrounds and countries. Their tasks are to organize and coordinate the activities of the YSC: manage young geoscientists blog posts on Geoethics, set-up a forum platform to allow discussions about geoethics between young and senior geoscientists, organize IAPG-YSC sessions at international conferences for example to discuss the new values that allow to do research in geosciences and organize working groups on geoethical topics. The YSC eagerly anticipates meeting the young geoscientist community at the upcoming EGU Assembly and discuss all current geoethical issues. We look forward to garnering further support for this exciting initiative.

A General Approach for Fluid Patterning and Application in Fabricating Microdevices.

PubMed

Huang, Zhandong; Yang, Qiang; Su, Meng; Li, Zheng; Hu, Xiaotian; Li, Yifan; Pan, Qi; Ren, Wanjie; Li, Fengyu; Song, Yanlin

2018-06-19

Engineering the fluid interface such as the gas-liquid interface is of great significance for solvent processing applications including functional material assembly, inkjet printing, and high-performance device fabrication. However, precisely controlling the fluid interface remains a great challenge owing to its flexibility and fluidity. Here, a general method to manipulate the fluid interface for fluid patterning using micropillars in the microchannel is reported. The principle of fluid patterning for immiscible fluid pairs including air, water, and oils is proposed. This understanding enables the preparation of programmable multiphase fluid patterns and assembly of multilayer functional materials to fabricate micro-optoelectronic devices. This general strategy of fluid patterning provides a promising platform to study the fundamental processes occurring on the fluid interface, and benefits applications in many subjects, such as microfluidics, microbiology, chemical analysis and detection, material synthesis and assembly, device fabrication, etc. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Theory of Connectivity: Nature and Nurture of Cell Assemblies and Cognitive Computation.

PubMed

Li, Meng; Liu, Jun; Tsien, Joe Z

2016-01-01

Richard Semon and Donald Hebb are among the firsts to put forth the notion of cell assembly-a group of coherently or sequentially-activated neurons-to represent percept, memory, or concept. Despite the rekindled interest in this century-old idea, the concept of cell assembly still remains ill-defined and its operational principle is poorly understood. What is the size of a cell assembly? How should a cell assembly be organized? What is the computational logic underlying Hebbian cell assemblies? How might Nature vs. Nurture interact at the level of a cell assembly? In contrast to the widely assumed randomness within the mature but naïve cell assembly, the Theory of Connectivity postulates that the brain consists of the developmentally pre-programmed cell assemblies known as the functional connectivity motif (FCM). Principal cells within such FCM is organized by the power-of-two-based mathematical principle that guides the construction of specific-to-general combinatorial connectivity patterns in neuronal circuits, giving rise to a full range of specific features, various relational patterns, and generalized knowledge. This pre-configured canonical computation is predicted to be evolutionarily conserved across many circuits, ranging from these encoding memory engrams and imagination to decision-making and motor control. Although the power-of-two-based wiring and computational logic places a mathematical boundary on an individual's cognitive capacity, the fullest intellectual potential can be brought about by optimized nature and nurture. This theory may also open up a new avenue to examining how genetic mutations and various drugs might impair or improve the computational logic of brain circuits.

Hydro lazy tongs energy booster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamonica, M.

1987-06-09

An apparatus is described for converting hydraulic power to rotational power. The apparatus comprises: a support base; a source of hydraulic fluid; a pair of piston and cylinder assemblies in communication with the source of hydraulic fluid and mounted to the support base such that the pistons thereof are generally parallel with one another but extending substantially opposite directions; means for alternating directly hydraulic fluid to each of the piston and cylinder assemblies; lazy tong assemblies comprising a first lazy tong assembly, a last lazy tong assembly and an intermediate lazy tong assembly. Each lazy tong assembly comprises at leastmore » one block slidably mounted in proximity to the support base and at least one pair of lazy tongs with each lazy tong having a pair of opposed ends.« less

Stoichiometric Control of Multiple Different Tectons in Coordination-Driven Self-assembly

PubMed Central

Lee, Junseong; Ghosh, Koushik; Stang, Peter J.

2009-01-01

We present a general strategy for the synthesis of stable, multi-component fused polygon complexes where coordination-driven self-assembly allows for single supramolecular species can be formed from multi-component self-assembly and the shape of the obtained polygons can be controlled by simply changing the ratio of individual components. The compounds are characterized by Multinuclear NMR, ESI Mass spectrometry. PMID:19663439

Waiting for 21-Lutetia "Rosetta" images as a final proof of structurizing force of inertia-gravity waves

NASA Astrophysics Data System (ADS)

Kochemasov, Gennady G.

2010-05-01

The 100 km long flattened asteroid 21-Lutetia will be imaged by the "Rosetta' spacecraft in July 2010. Knowing that heavenly bodies are effectively structurized by warping inertia-gravity waves one might expect that Lutetia will not be an exclusion out of a row of bodies subjected to an action of these waves [1-9]. The elliptical keplerian orbits with periodically changing bodies' accelerations imply inertia-gravity forces applied to any body notwithstanding its size, mass, density, chemical composition, and physical state. These forces produce inertia-gravity waves having in rotating bodied standing character and four directions of propagation (orthogonal and diagonal). Interfering these waves produce in bodies three (five) kinds of tectonic blocks: uprising strongly and moderately (++, +), subsiding deeply and moderately (--, -), and neutral (0) where + and - are compensated. Lengths and amplitudes of warping waves form the harmonic sequence. The fundamental wave1 (long 2πR) makes ubiquitous tectonic dichotomy (two antipodean segments or hemispheres: one risen, another fallen). In small bodies this structurization is expressed in their convexo-concave shape: one hemisphere is bulged, another one pressed in. Bulging hemisphere is extended, pressed in hemisphere contracted. This wave shaping tends to transform a globular body into a tetrahedron - the essentially dichotomous simplest Plato's figure. In this polyhedron always there is an opposition of extension (a face) to contraction (a vertex). The first overtone wave2 (long πR) makes tectonic sectors, also risen and fallen, and regularly disposed on (and in) a globe. This regularity is expressed in an octahedron form. The octahedron (diamond) or its parts are often observed in shapes of small bodies with small gravities. Larger bodies with rather strong gravity tend to smooth polyhedron vertices and edges but a polyhedron structurization is always present inside their globes and is shown in their tectonics, geomorphology and geophysical fields. The shorter warping waves are also present but because of their comparatively small lengths and amplitudes they are not so important in distorting globes. The presented main harmonic row is complicated by superimposed individual waves lengths of which are inversely proportional to orbital frequencies: higher frequency - smaller wave, and, vice versa, lower frequency - larger wave. In the main asteroid belt the fundamental wave of the main sequence and the individual wave (also long 2πR) are in the strongest 1:1 resonance what prohibits an accretion of a real planet because of prevailing debris scattering. Thus, the Lutetia shape can support the main point of the wave planetology - «orbits make structures». [1] Kochemasov G.G. (1999) "Diamond" and "dumb-bells"-like shapes of celestial bodies induced by inertia-gravity waves // 30th Vernadsky-Brown microsymposium on comparative planetology, Abstracts, Moscow, Vernadsky Inst., 49-50. [2] -"- (1999) On convexo-concave shape of small celestial bodies // Asteroids, Comets, Meteors. Cornell Univ., July 26-30, 1999, Abstr. # 24.22. [3] -"- (2006) The wave planetology illustrated - I: dichotomy, sectoring // 44th Vernadsky-Brown microsymposium "Topics in Comparative Planetology", Oct. 9-11, 2006, Moscow, Vernadsky Inst., Abstr. m44_39, CD-ROM; [4] -"- (2006) Theorems of the wave planetology imprinted in small bodies // Geophys. Res. Abstracts, Vol. 8, EGU06-A-01098, CD-ROM. [5] -"- (2007) Plato's polyhedra in space // EPSC Abstracts, Vol. 2, EPSC2007-A-00014, 2007. [6] -"-(2007) Wave shaping of small saturnian satellites and wavy granulation of saturnian rings // Geophys. Res. Abstracts, Vol. 9, EGU2007-A-01594, CD-ROM. [7] -"- (2007) Plato's polyhedra as shapes of small satellites in the outer Solar system // New Concepts in Global Tectonics Newsletter, # 44, 43-45. [8] -"- (2008) Plato' polyhedra as shapes of small icy satellites // Geophys. Res. Abstracts, Vol. 10, EGU2008-A-01271, CD-ROM. [9] -"- (2008) A wave geometrization of small heavenly bodies // GRA, Vol. 10, EGU2008-A-01275, CD-ROM.

The ceilometer inter-comparison campaign CeiLinEx2015

NASA Astrophysics Data System (ADS)

Mattis, Ina; Begbie, Robert; Boyouk, Neda; Bravo-Aranda, Juan Antonio; Brettle, Mike; Cermak, Jan; Drouin, Marc-Antoine; Geiß, Alexander; Görsdorf, Ulrich; Haefele, Alexander; Haeffelin, Martial; Hervo, Maxime; Komínková, Kateřina; Leinweber, Ronny; Müller, Gerhard; Münkel, Christoph; Pattantyús-Ábrahám, Margit; Pönitz, Kornelia; Wagner, Frank; Wiegner, Matthias

2016-04-01

Ceilometers are well established instruments for the detection of cloud base heights. Since about 2000, modern ceilometer types (mainly CHM15k, CL51, and CL31) are used also for investigations of the top height of the planetary boundary layer and for quantitative retrievals of vertical profiles of backscatter coefficients. In the framework of the European projects E-PROFILE and TOPROF, tools for the exchange of ceilometer data among European meteorological services, as well as calibration and visualization procedures are developed and established. Unfortunately, the national networks are equipped with instruments of different generations and different manufacturers. In order to quantify and reduce those inhomogeneities, the ceilometer inter-comparison experiment CeiLinEx2015 was performed between June and September 2015 at the Meteorological Observatory Lindenberg, Germany. We tested six different instrument types: LD40, CL31, CL51, CHM15k, CHM15kx, and CS135. Each instrument type was represented by two instruments to estimate the instrument-to-instrument variability and the influence of different firmware versions. Two Raman lidars (RAMSES and RALPH), operated by German Meteorological Service (DWD) are used as reference instruments. Further ancillary data are available, e.g., hourly eye observations, four radio soundings per day, and AERONET sun photometer observations. Beside the typical vertically pointing measurement scheme, we performed special measurements with horizontal pointing direction or blocked receiver telescope. During the experiment, we could collect measurements under very different meteorological situations: Several clear nights allow for Rayleigh-Calibration (see Hervo and CeiLinEx2015 team [EGU2016-4785]), a strong event of Sahara dust intrusion can be used to study the behaviour of the instruments in presence of large, non-spherical particles (like volcanic ash). Further investigations focus, e.g., on the detection of very low cloud base heights, on the retrieval of boundary layer heights, on the performance of the individual instruments in the overlap region, on the characterization of signal artefacts in the clean free troposphere, on daytime performance, and on the estimation of measurement range. All those investigations need calibrated ceilometer profiles as input data. Therefore, quantitative calibration of all instruments is a very important first step of data analysis. [Hervo and CeiLinEx2015 team EGU2016-4785] present the procedure and results of calibration of all individual instruments in a companion contribution. In this contribution, we will provide a general overview on the CeiLinEx2015 experiment together with first results. We present preliminary results concerning signal artefacts in the free troposphere and correlation studies in more detail.

The Convention on the Elimination of All Forms of Discrimination Against Women (CEDAW): Congressional Issues

DTIC Science & Technology

2006-12-14

marriage partner. On October 6, 1999, the U.N. General Assembly adopted an Optional Protocol to strengthen the Convention.7 The Protocol entered into force...Consent to Marriage (1957).8 In 1967, after two years of negotiations, the U.N. General Assembly adopted the Declaration on the Elimination of... Malaysia ; Mauritius; Netherlands; Portugal; Republic of Korea; Singapore; Slovenia; South Africa; and Thailand. 12 A full list of CEDAW Committee

Prince George's Community College Annual Cost Containment Report, Submitted to the Maryland Higher Education Commission and the Maryland General Assembly in Compliance with Section 8 of Chapter 465 of the Acts of 1991.

ERIC Educational Resources Information Center

Prince George's Community Coll., Largo, MD. Board of Trustees.

Each year, the Board of Trustees of Prince George's Community College (PGCC), in Maryland, must submit a report evaluating the effectiveness of PGCC's financial plan to the state's Higher Education Committee and General Assembly. This document provides the report for fiscal year (FY) 1996 divided into four sections. The first section reviews the…

Prince George's Community College Annual Cost Containment Report, Submitted to the Maryland Higher Education Commission and the Maryland General Assembly in Compliance with Section 8 of Chapter 465 of the Acts of 1991.

ERIC Educational Resources Information Center

Prince George's Community Coll., Largo, MD. Board of Trustees.

Each year, the Board of Trustees of Prince George's Community College (PGCC) in Largo, Maryland, must submit a report evaluating the effectiveness of PGCC's financial plan to the state's Higher Education Committee and General Assembly. This document provides the report for fiscal year (FY) 1994 divided into four sections. The first section reviews…

Prince George's Community College Annual Cost Containment Report. Submitted to the Maryland Higher Education Commission and the Maryland General Assembly in Compliance with Section 8 of Chapter 465 of the Acts of 1991.

ERIC Educational Resources Information Center

Prince George's Community Coll., Largo, MD. Board of Trustees.

Each year, the Board of Trustees of Prince George's Community College (PGCC) in Largo, Maryland, must submit a report evaluating the effectiveness of PGCC's financial plan to the state's Higher Education Committee and General Assembly. This report, for fiscal year (FY) 1993, is divided into four sections. The first section reviews the cost…

Advances in Spatial Data Infrastructure, Acquisition, Analysis, Archiving and Dissemination

NASA Technical Reports Server (NTRS)

Ramapriyan, Hampapuran K.; Rochon, Gilbert L.; Duerr, Ruth; Rank, Robert; Nativi, Stefano; Stocker, Erich Franz

2010-01-01

The authors review recent contributions to the state-of-thescience and benign proliferation of satellite remote sensing, spatial data infrastructure, near-real-time data acquisition, analysis on high performance computing platforms, sapient archiving, multi-modal dissemination and utilization for a wide array of scientific applications. The authors also address advances in Geoinformatics and its growing ubiquity, as evidenced by its inclusion as a focus area within the American Geophysical Union (AGU), European Geosciences Union (EGU), as well as by the evolution of the IEEE Geoscience and Remote Sensing Society's (GRSS) Data Archiving and Distribution Technical Committee (DAD TC).

Executable research compendia in geoscience research infrastructures

NASA Astrophysics Data System (ADS)

Nüst, Daniel

2017-04-01

From generation through analysis and collaboration to communication, scientific research requires the right tools. Scientists create their own software using third party libraries and platforms. Cloud computing, Open Science, public data infrastructures, and Open Source enable scientists with unprecedented opportunites, nowadays often in a field "Computational X" (e.g. computational seismology) or X-informatics (e.g. geoinformatics) [0]. This increases complexity and generates more innovation, e.g. Environmental Research Infrastructures (environmental RIs [1]). Researchers in Computational X write their software relying on both source code (e.g. from https://github.com) and binary libraries (e.g. from package managers such as APT, https://wiki.debian.org/Apt, or CRAN, https://cran.r-project.org/). They download data from domain specific (cf. https://re3data.org) or generic (e.g. https://zenodo.org) data repositories, and deploy computations remotely (e.g. European Open Science Cloud). The results themselves are archived, given persistent identifiers, connected to other works (e.g. using https://orcid.org/), and listed in metadata catalogues. A single researcher, intentionally or not, interacts with all sub-systems of RIs: data acquisition, data access, data processing, data curation, and community support [3]. To preserve computational research [3] proposes the Executable Research Compendium (ERC), a container format closing the gap of dependency preservation by encapsulating the runtime environment. ERCs and RIs can be integrated for different uses: (i) Coherence: ERC services validate completeness, integrity and results (ii) Metadata: ERCs connect the different parts of a piece of research and faciliate discovery (iii) Exchange and Preservation: ERC as usable building blocks are the shared and archived entity (iv) Self-consistency: ERCs remove dependence on ephemeral sources (v) Execution: ERC services create and execute a packaged analysis but integrate with existing platforms for display and control These integrations are vital for capturing workflows in RIs and connect key stakeholders (scientists, publishers, librarians). They are demonstrated using developments by the DFG-funded project Opening Reproducible Research (http://o2r.info). Semi-automatic creation of ERCs based on research workflows is a core goal of the project. References [0] Tony Hey, Stewart Tansley, Kristin Tolle (eds), 2009. The Fourth Paradigm: Data-Intensive Scientific Discovery. Microsoft Research. [1] P. Martin et al., Open Information Linking for Environmental Research Infrastructures, 2015 IEEE 11th International Conference on e-Science, Munich, 2015, pp. 513-520. doi: 10.1109/eScience.2015.66 [2] Y. Chen et al., Analysis of Common Requirements for Environmental Science Research Infrastructures, The International Symposium on Grids and Clouds (ISGC) 2013, Taipei, 2013, http://pos.sissa.it/archive/conferences/179/032/ISGC [3] Opening Reproducible Research, Geophysical Research Abstracts Vol. 18, EGU2016-7396, 2016, http://meetingorganizer.copernicus.org/EGU2016/EGU2016-7396.pdf

Fire as a natural and human factor shaping the Mediterranean Ecosystems. The Montgó forest fire and the teaching for the Geograns (older than 55) students

NASA Astrophysics Data System (ADS)

Cerdà, Artemi; González Pelayo, Óscar; Mataix-Solera, Jorge; Arcenegui, Victoria; Jordán, Antonio; Úbeda, Xavier; Pereira, Paulo

2015-04-01

Cerdà and Civera (2012); Fernández Raga et al., (2013) and Cerdà et al., (2014) show that teaching Earth Sciences to students older than 55 is a new challenge for the universities of developed countries due to the higher life expectancy and the arrival of new students and teaching programs to the academy. Fire, due to the background of many of our students, is one of those topics that need more attention when teaching to students older than 55. Most of them see the fire as the enemy and not as a part of the natural and human ecosystems. The view of the scientists is based in the scientific method, and they see the fire as part of the ecosystems and the human societies (Roebroeks and Villa, 2011; Archibald et al., 2012; Berna et al, 2012; Romme et al., 2012; Zumbrunnen et al., 2012). Moreover, the studies developed on the soils, vegetation and hydrological response of fire affected land, show that the fire disturbance use to be short and the ecosystems return to the pre-fire period after a window of disturbance (Cerdà and Lasanta, 2005; Doerr and Cerdà, 2005; Lasanta and Cerdà, 2005; Granjed et al., 2011; Pérez Cabello et al., 2012; Bodí et al., 2013; Guenon et al., 2013; León et al., 2013: Pereira et al., 2013; Pereira et al., 2015; Prats et al., 2015), and this is related to the policies applied in different countries (Carreiras et al., 2014). More recent advances in the impact of fire on soils can be found in Bento-Gonçalves et al. (2012) This research show the different strategies that we apply to explain the students older than 55 to understand the natural processes that are involved in nature due to the fire. The lectures are developed at the lectures room as an introduction about the fire in the Earth System and how the fire modify the soils, the water resources and change the vegetation cover, and 10 hours of field work in an recently fire affected land. The second part of the course, 10 hours in the field, will be done in February during a visit to the recently fire affected land in the Montgó Mountain in Eastern Spain. Acknowledgements To the "Ministerio de Economía and Competitividad" of Spanish Government for finance the POSTFIRE project (CGL2013- 47862-C2-1-R), FUEGORED, Spanish Soil Science Society, Alcoi andJavea councils, Botánica Mediterrànea, ACIF Alcoi, ACIF Marina Alta, Xàbia Viva, Montgó Viu, and Sierra de Mariola and Montgó Natural Parks for their collaboration in our teaching. The research projects GL2008-02879/BTE, LEDDRA 243857 and PREVENTING AND REMEDIATING DEGRADATION OF SOILS IN EUROPE THROUGH LAND CARE (RECARE)FP7-ENV-2013- supported this research. References Archibald, S., Staver, A. C., Levin, S. A. 2012. Evolution of human-driven fire regimes in Africa. Proceedings of the National Academy of Sciences, 109(3), 847-852. Bento-Gonçalves, A., Vieira, A., Úbeda, X., Martin, D. 2012. Fire and soils: key concepts and recent advances. Geoderma, 191, 3-13. Berna, F., Goldberg, P., Horwitz, L. K., Brink, J., Holt, S., Bamford, M., & Chazan, M. (2012). Microstratigraphic evidence of in situ fire in the Acheulean strata of Wonderwerk Cave, Northern Cape province, South Africa. Proceedings of the National Academy of Sciences, 109(20), E1215-E1220. Bodí, M.B., Muñoz-Santa, I., Armero, C., Doerr, S.H., Mataix-Solera, J., Cerdá, A. 2013. Spatial and temporal variations of water repellency and probability of its occurrence in calcareous Mediterranean rangeland soils affected by fires Catena. 108:14-25. 10.1016/j.catena.2012.04.002. Carreiras, M., Ferreira, A.J.D., Valente, S., Fleskens, L., Gonzales-Pelayo, Ó., Rubio, J.L., Stoof, C.R., Coelho, C.O.A., Ferreira, C.S.S., Ritsema, C.J. 2014. Comparative analysis of policies to deal with the wildfire risk. Land Degradation & Development, 25, 92-103. http://dx.doi.org/10.1002/ldr.2274 Cerdà, A., Civera, C. (2012) Teaching Physical Geography to students older than 55. The GEOGRANS Project within the NAUGRAN program at the University of Valencia, Spain. In EGU General Assembly Conference Abstracts (Vol. 14, p. 14010). Cerdà, A., Civera, C., Giménez-Morera, A., Burguet, M. (2014). Teaching Environmental Soil Science to Students older than 55. In EGU General Assembly Conference Abstracts (Vol. 16, p. 16967). Cerdà, A., Lasanta, A. 2005. Long-term erosional responses after fire in the Central Spanish Pyrenees: 1. Water and sediment yield. Catena, 60, 59-80. Doerr, S., Cerdà, A. 2005. Fire effects on soil system functioning: new insights and future challenges International Journal of Wildland Fire Preface. International Journal of Wildland Fire 14(4) 339-342 Fernández Raga, M., Cerdà, A., Civera, C. 2013. New successful ideas to teach Earth Science to students older than 55 by means of trekking. In EGU General Assembly Conference Abstracts (Vol. 15, p. 1041). Granged, A. J., Jordán, A., Zavala, L. M., Bárcenas, G. (2011): Fire-induced changes in soil water repellency increased fingered flow and runoff rates following the 2004 Huelva wildfire. Hydrological Processes, 25: 1614-1629. Guénon, R., Vennetier, M., Dupuy, N., Roussos, S., Pailler, A., Gros, R. 2013. Trends in recovery of Mediterranean soil chemical properties and microbial activities after infrequent and frequent wildfires. Land Degradation & Development, 24: 115- 128. DOI 10.1002/ldr.1109 Lasanta, A., Cerdà, A. 2005. Long-term erosional responses after fire in the Central Spanish Pyrenees: 2. Solute release. Catena, 60, 80-101. León, J. Bodí, M.B., Cerdà, A.., Badía, D. 2013. The contrasted response of ash to wetting. The effects of ash type, thickness and rainfall events. Geoderma, 209-210, 143-152. http://dx.doi.org/10.1016/j.geoderma.2012.01.006 Pereira, P., Úbeda, X., Martin, D., Mataix-Solera, J., Cerdà, A., Burguet, M. 2013. Wildfire effects on extractable elements in ash from a Pinus pinaster forest in Portugal, Hydrological Processes, DOI: 10.1002/hyp.9907 Pereira, P., Cerdà, A., Úbeda, X., Mataix-Solera, J., Arcenegui, V., Zavala, L. M. 2015. Modelling the impacts of wildfire on ash in a short-term period. Land Degradation & Development.| DOI: 10.1002/ldr.2195 Pérez-Cabello, F., Cerdà, A., de la Riva, J., Echeverría, M.T., García-Martín, A., Ibarra, P., Lasanta, T., Montorio, R., Palacios, V. 2012. Micro-scale post-fire surface cover changes monitored using high spatial resolution photography in a semiarid environment: A useful tool in the study of post-fire soil erosion processes, Journal of Arid Environments, 76: 88-96. 10.1016/j.jaridenv.2011.08.007 Pérez-Cabello, F., Cerdà, A., de la Riva, J., Echeverría, M.T., García-Martín, A., Ibarra, P., Lasanta, T., Montorio, R., Palacios, V. 2012. Micro-scale post-fire surface cover changes monitored using high spatial resolution photography in a semiarid environment: A useful tool in the study of post-fire soil erosion processes, Journal of Arid Environments, 76: 88-96. 10.1016/j.jaridenv.2011.08.007 Prats, S.A., Malvar, M.C., Simões-Vieira, D.C., MacDonald, L., Keizer, J.J. 2015. Effectiveness of hydro- mulching to reduce runoff and erosion in a recently burnt pine plantation in central Portugal. Land Degradation & Development, DOI: 10.1002/ldr.2236. Roebroeks, W., Villa, P. 2011. On the earliest evidence for habitual use of fire in Europe. Proceedings of the National Academy of Sciences, 108(13), 5209-5214. Romme, W. H., Boyce, M. S., Gresswell, R., Merrill, E. H., Minshall, G. W., Whitlock, C., Turner, M. G. 2011. Twenty years after the 1988 Yellowstone fires: lessons about disturbance and ecosystems. Ecosystems, 14(7), 1196-1215. Zumbrunnen, T., Menéndez, P., Bugmann, H., Conedera, M., Gimmi, U., Bürgi, M. 2012. Human impacts on fire occurrence: a case study of hundred years of forest fires in a dry alpine valley in Switzerland. Regional Environmental Change, 12(4), 935-949.

Equilibrium polymerization models of re-entrant self-assembly

NASA Astrophysics Data System (ADS)

Dudowicz, Jacek; Douglas, Jack F.; Freed, Karl F.

2009-04-01

As is well known, liquid-liquid phase separation can occur either upon heating or cooling, corresponding to lower and upper critical solution phase boundaries, respectively. Likewise, self-assembly transitions from a monomeric state to an organized polymeric state can proceed either upon increasing or decreasing temperature, and the concentration dependent ordering temperature is correspondingly called the "floor" or "ceiling" temperature. Motivated by the fact that some phase separating systems exhibit closed loop phase boundaries with two critical points, the present paper analyzes self-assembly analogs of re-entrant phase separation, i.e., re-entrant self-assembly. In particular, re-entrant self-assembly transitions are demonstrated to arise in thermally activated equilibrium self-assembling systems, when thermal activation is more favorable than chain propagation, and in equilibrium self-assembly near an adsorbing boundary where strong competition exists between adsorption and self-assembly. Apparently, the competition between interactions or equilibria generally underlies re-entrant behavior in both liquid-liquid phase separation and self-assembly transitions.

30 CFR 27.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING PRODUCTS METHANE-MONITORING SYSTEMS General Provisions § 27.2 Definitions. As used in this part... designs, manufactures, or assembles and that seeks certification or preliminary testing of a methane-monitoring system or component. (c) Methane-monitoring system means a complete assembly of one or more...

INTEGRATED EXPERIENCE APPROACH TO LEARNING.

ERIC Educational Resources Information Center

POSTLETHWAIT, S.N.; AND OTHERS

THE USE OF AUDIOTUTORIAL TECHNIQUES FOR TEACHING INTRODUCTORY COLLEGE BOTANY IS DESCRIBED. SPECIFIC PRACTICES USED AT PURDUE UNIVERSITY TO ILLUSTRATE DIFFERENT FACETS OF THE APPROACH ARE ANALYZED. INCLUDED ARE INDEPENDENT STUDY SESSIONS, SMALL ASSEMBLY SESSIONS, GENERAL ASSEMBLY SESSIONS, AND HOME STUDY SESSIONS. ILLUSTRATIONS AND SPECIFICATIONS…

Theory of Connectivity: Nature and Nurture of Cell Assemblies and Cognitive Computation

PubMed Central

Li, Meng; Liu, Jun; Tsien, Joe Z.

2016-01-01

Richard Semon and Donald Hebb are among the firsts to put forth the notion of cell assembly—a group of coherently or sequentially-activated neurons—to represent percept, memory, or concept. Despite the rekindled interest in this century-old idea, the concept of cell assembly still remains ill-defined and its operational principle is poorly understood. What is the size of a cell assembly? How should a cell assembly be organized? What is the computational logic underlying Hebbian cell assemblies? How might Nature vs. Nurture interact at the level of a cell assembly? In contrast to the widely assumed randomness within the mature but naïve cell assembly, the Theory of Connectivity postulates that the brain consists of the developmentally pre-programmed cell assemblies known as the functional connectivity motif (FCM). Principal cells within such FCM is organized by the power-of-two-based mathematical principle that guides the construction of specific-to-general combinatorial connectivity patterns in neuronal circuits, giving rise to a full range of specific features, various relational patterns, and generalized knowledge. This pre-configured canonical computation is predicted to be evolutionarily conserved across many circuits, ranging from these encoding memory engrams and imagination to decision-making and motor control. Although the power-of-two-based wiring and computational logic places a mathematical boundary on an individual’s cognitive capacity, the fullest intellectual potential can be brought about by optimized nature and nurture. This theory may also open up a new avenue to examining how genetic mutations and various drugs might impair or improve the computational logic of brain circuits. PMID:27199674

Rotative balance of the I.M.F. Lille and associated experimental techniques

NASA Technical Reports Server (NTRS)

Verbrugge, R.

1981-01-01

The study of aerodynamic effects at high incidence associated with motions of wide amplitude incorporating continuous rotations requires the consideration of coupled effects, which are generally nonlinear, in a formulation of equations of motion. A rotative balance designed to simulate such maneuvers in a windtunnel was created to form a test medium for analytical studies. A general description of the assembly is provided by considering two main ranges of application. The capacities and performance of the assembly are discussed.

Joint Discussion 14 Modeling dense stellar systems

NASA Astrophysics Data System (ADS)

Sills, Alison I.; Subr, Ladislav; Portegies Zwart, Simon F.

2007-08-01

Joint Discussion 14 was held at the General Assembly of the International Astronomical Union from August 17 until 23 in the beautiful Bohemian capital, Prague. The blueprints for this meeting were laid out during the MODEST-5 workshop, held in the Canadian city of Hamilton, Ontario in August 2004. We were sitting in a nice cafe with local brew and food, discussing the future of the MODEST community when we posed the idea for this Joint Discussion at the General Assembly. The meeting was then coined MODEST-7.

53. Photocopied August 1978. DERRICKS AND GENERAL VIEW OF PIT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

53. Photocopied August 1978. DERRICKS AND GENERAL VIEW OF PIT WALLS, POWER HOUSE, NOVEMBER 7, 1900. THE MONOLITHIC BASES OF THESE WALLS PRIOR TO THE ERECTION OF THE PRE-MOULDED BLOCKS APPEAR TO THE RIGHT. ASSEMBLED WALLS ARE ON THE LEFT. NOTE THAT THE MONOLITHIC FLOORS FOR THE TAIL PITS HAVE BEEN POURED IN THE FIVE RACES ON THE RIGHT, BUT NOT IN THE THREE CLOSEST TO THE ALREADY-ASSEMBLED WALLS. (103) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

Comparing memory-efficient genome assemblers on stand-alone and cloud infrastructures.

PubMed

Kleftogiannis, Dimitrios; Kalnis, Panos; Bajic, Vladimir B

2013-01-01

A fundamental problem in bioinformatics is genome assembly. Next-generation sequencing (NGS) technologies produce large volumes of fragmented genome reads, which require large amounts of memory to assemble the complete genome efficiently. With recent improvements in DNA sequencing technologies, it is expected that the memory footprint required for the assembly process will increase dramatically and will emerge as a limiting factor in processing widely available NGS-generated reads. In this report, we compare current memory-efficient techniques for genome assembly with respect to quality, memory consumption and execution time. Our experiments prove that it is possible to generate draft assemblies of reasonable quality on conventional multi-purpose computers with very limited available memory by choosing suitable assembly methods. Our study reveals the minimum memory requirements for different assembly programs even when data volume exceeds memory capacity by orders of magnitude. By combining existing methodologies, we propose two general assembly strategies that can improve short-read assembly approaches and result in reduction of the memory footprint. Finally, we discuss the possibility of utilizing cloud infrastructures for genome assembly and we comment on some findings regarding suitable computational resources for assembly.

Stoichiometric control of multiple different tectons in coordination-driven self-assembly: preparation of fused metallacyclic polygons.

PubMed

Lee, Junseong; Ghosh, Koushik; Stang, Peter J

2009-09-02

We present a general strategy for the synthesis of stable, multicomponent fused polygon complexes in which coordination-driven self-assembly allows for single supramolecular species to be formed from multicomponent self-assembly and the shape of the obtained polygons can be controlled simply by changing the ratio of individual components. The compounds have been characterized by multinuclear NMR spectroscopy and electrospray ionization mass spectrometry.

A parallel algorithm for generation and assembly of finite element stiffness and mass matrices

NASA Technical Reports Server (NTRS)

Storaasli, O. O.; Carmona, E. A.; Nguyen, D. T.; Baddourah, M. A.

1991-01-01

A new algorithm is proposed for parallel generation and assembly of the finite element stiffness and mass matrices. The proposed assembly algorithm is based on a node-by-node approach rather than the more conventional element-by-element approach. The new algorithm's generality and computation speed-up when using multiple processors are demonstrated for several practical applications on multi-processor Cray Y-MP and Cray 2 supercomputers.

Hazardous Waste Cleanup: GM Assembly Division in Linden, New Jersey

EPA Pesticide Factsheets

The General Motors Assembly Division (GM) site is 35 acres and is located at 1016 West Edgar Road in an area zoned for residential, commercial and manufacturing/industrial uses in Linden, New Jersey. The facility has operated since 1935 as a manufacturing

Stateline: Virginia's Excellent Adventure

ERIC Educational Resources Information Center

Christie, Kathy

2004-01-01

The Virginia General Assembly is concerned that "there remains a significant gap between the best- and poorest-performing schools." Even as it acknowledged that most elementary and secondary schools are meeting academic achievement goals, the Assembly proceeded to request that information be collected on best practices used in…

Nuclear Criticality Experimental Research Center (NCERC) Overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goda, Joetta Marie; Grove, Travis Justin; Hayes, David Kirk

The mission of the National Criticality Experiments Research Center (NCERC) at the Device Assembly Facility (DAF) is to conduct experiments and training with critical assemblies and fissionable material at or near criticality in order to explore reactivity phenomena, and to operate the assemblies in the regions from subcritical through delayed critical. One critical assembly, Godiva-IV, is designed to operate above prompt critical. The Nuclear Criticality Experimental Research Center (NCERC) is our nation’s only general-purpose critical experiments facility and is only one of a few that remain operational throughout the world. This presentation discusses the history of NCERC, the general activitiesmore » that makeup work at NCERC, and the various government programs and missions that NCERC supports. Recent activities at NCERC will be reviewed, with a focus on demonstrating how NCERC meets national security mission goals using engineering fundamentals. In particular, there will be a focus on engineering theory and design and applications of engineering fundamentals at NCERC. NCERC activities that relate to engineering education will also be examined.« less

Supra-Nanoparticle Functional Assemblies through Programmable Stacking

DOE PAGES

Tian, Cheng; Cordeiro, Marco Aurelio L.; Lhermitte, Julien; ...

2017-05-25

The quest for the by-design assembly of material and devices from nanoscale inorganic components is well recognized. Conventional self-assembly is often limited in its ability to control material morphology and structure simultaneously. We report a general method of assembling nanoparticles in a linear “pillar” morphology with regulated internal configurations. Our approach is inspired by supramolecular systems, where intermolecular stacking guides the assembly process to form diverse linear morphologies. Programmable stacking interactions were realized through incorporation of DNA coded recognition between the designed planar nanoparticle clusters. This resulted in the formation of multilayered pillar architectures with a well-defined internal nanoparticle organization.more » Furthermore, by controlling the number, position, size, and composition of the nanoparticles in each layer, a broad range of nanoparticle pillars were assembled and characterized in detail. In addition, we demonstrated the utility of this stacking assembly strategy for investigating plasmonic and electrical transport properties.« less

Supra-Nanoparticle Functional Assemblies through Programmable Stacking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Cheng; Cordeiro, Marco Aurelio L.; Lhermitte, Julien

The quest for the by-design assembly of material and devices from nanoscale inorganic components is well recognized. Conventional self-assembly is often limited in its ability to control material morphology and structure simultaneously. We report a general method of assembling nanoparticles in a linear “pillar” morphology with regulated internal configurations. Our approach is inspired by supramolecular systems, where intermolecular stacking guides the assembly process to form diverse linear morphologies. Programmable stacking interactions were realized through incorporation of DNA coded recognition between the designed planar nanoparticle clusters. This resulted in the formation of multilayered pillar architectures with a well-defined internal nanoparticle organization.more » Furthermore, by controlling the number, position, size, and composition of the nanoparticles in each layer, a broad range of nanoparticle pillars were assembled and characterized in detail. In addition, we demonstrated the utility of this stacking assembly strategy for investigating plasmonic and electrical transport properties.« less

Supra-Nanoparticle Functional Assemblies through Programmable Stacking.

PubMed

Tian, Cheng; Cordeiro, Marco Aurelio L; Lhermitte, Julien; Xin, Huolin L; Shani, Lior; Liu, Mingzhao; Ma, Chunli; Yeshurun, Yosef; DiMarzio, Donald; Gang, Oleg

2017-07-25

The quest for the by-design assembly of material and devices from nanoscale inorganic components is well recognized. Conventional self-assembly is often limited in its ability to control material morphology and structure simultaneously. Here, we report a general method of assembling nanoparticles in a linear "pillar" morphology with regulated internal configurations. Our approach is inspired by supramolecular systems, where intermolecular stacking guides the assembly process to form diverse linear morphologies. Programmable stacking interactions were realized through incorporation of DNA coded recognition between the designed planar nanoparticle clusters. This resulted in the formation of multilayered pillar architectures with a well-defined internal nanoparticle organization. By controlling the number, position, size, and composition of the nanoparticles in each layer, a broad range of nanoparticle pillars were assembled and characterized in detail. In addition, we demonstrated the utility of this stacking assembly strategy for investigating plasmonic and electrical transport properties.

Interrogating viral capsid assembly with ion mobility-mass spectrometry

NASA Astrophysics Data System (ADS)

Uetrecht, Charlotte; Barbu, Ioana M.; Shoemaker, Glen K.; van Duijn, Esther; Heck, Albert J. R.

2011-02-01

Most proteins fulfil their function as part of large protein complexes. Surprisingly, little is known about the pathways and regulation of protein assembly. Several viral coat proteins can spontaneously assemble into capsids in vitro with morphologies identical to the native virion and thus resemble ideal model systems for studying protein complex formation. Even for these systems, the mechanism for self-assembly is still poorly understood, although it is generally thought that smaller oligomeric structures form key intermediates. This assembly nucleus and larger viral assembly intermediates are typically low abundant and difficult to monitor. Here, we characterised small oligomers of Hepatitis B virus (HBV) and norovirus under equilibrium conditions using native ion mobility mass spectrometry. This data in conjunction with computational modelling enabled us to elucidate structural features of these oligomers. Instead of more globular shapes, the intermediates exhibit sheet-like structures suggesting that they are assembly competent. We propose pathways for the formation of both capsids.

Wedge and spring assembly for securing coils in electromagnets and dynamoelectric machines

DOEpatents

Lindner, Melvin; Cottingham, James G.

1996-03-12

A wedge and spring assembly for use in electromagnets or dynamoelectric machines having a housing with an axis therethrough and a plurality of coils supported on salient poles that extend radially inward from the housing toward the housing axis to define a plurality of interpole spaces. The wedge and spring assembly includes a nonmagnetic retainer spring and a nonmagnetic wedge. The retainer spring is formed to fit into one of the interpole spaces, and has juxtaposed ends defining between them a slit extending in a direction generally parallel to the housing axis. The wedge for insertion into the slit provides an outwardly directed force on respective portions of the juxtaposed ends to expand the slit so that respective portions of the retainer spring engage areas of the coils adjacent thereto, thereby resiliently holding the coils against their respective salient poles. The retainer spring is generally triangular shaped to fit within the interpole space, and the wedge is generally T-shaped.

Women's Participation in Physics Internationally: the IUPAP Working Group on Women

NASA Astrophysics Data System (ADS)

Franz, Judy

2001-04-01

In 1999 the General Assembly of the International Union of Pure and Applied Physics (IUPAP) voted to establish a Working Group on Women in Physics with the following charge: to survey the situation for women in physics in IUPAP member countries; to analyze and report the data collected along with suggestions on how to improve the situation; to suggest ways that women can become more involved in IUPAP, including the Liaison Committees, the Commissions, the Council, and the General Assemblies; and to report all findings at the next General Assembly in 2002. The Working Group was established in 2000 with 11 members representing North and South America, Europe, Asia and the Middle East/Africa. The Group has been gathering data on women in physics and is planning to hold an International Conference on Women in Physics at UNESCO Headquarters in Paris in March, 2002. I will discuss some of the findings and the plans for the future.

Wedge and spring assembly for securing coils in electromagnets and dynamoelectric machines

DOEpatents

Lindner, M.; Cottingham, J.G.

1996-03-12

A wedge and spring assembly for use in electromagnets or dynamoelectric machines is disclosed having a housing with an axis therethrough and a plurality of coils supported on salient poles that extend radially inward from the housing toward the housing axis to define a plurality of interpole spaces. The wedge and spring assembly includes a nonmagnetic retainer spring and a nonmagnetic wedge. The retainer spring is formed to fit into one of the interpole spaces, and has juxtaposed ends defining between them a slit extending in a direction generally parallel to the housing axis. The wedge for insertion into the slit provides an outwardly directed force on respective portions of the juxtaposed ends to expand the slit so that respective portions of the retainer spring engage areas of the coils adjacent thereto, thereby resiliently holding the coils against their respective salient poles. The retainer spring is generally triangular shaped to fit within the interpole space, and the wedge is generally T-shaped. 6 figs.

The precision measurement and assembly for miniature parts based on double machine vision systems

NASA Astrophysics Data System (ADS)

Wang, X. D.; Zhang, L. F.; Xin, M. Z.; Qu, Y. Q.; Luo, Y.; Ma, T. M.; Chen, L.

2015-02-01

In the process of miniature parts' assembly, the structural features on the bottom or side of the parts often need to be aligned and positioned. The general assembly equipment integrated with one vertical downward machine vision system cannot satisfy the requirement. A precision automatic assembly equipment was developed with double machine vision systems integrated. In the system, a horizontal vision system is employed to measure the position of the feature structure at the parts' side view, which cannot be seen with the vertical one. The position measured by horizontal camera is converted to the vertical vision system with the calibration information. By careful calibration, the parts' alignment and positioning in the assembly process can be guaranteed. The developed assembly equipment has the characteristics of easy implementation, modularization and high cost performance. The handling of the miniature parts and assembly procedure were briefly introduced. The calibration procedure was given and the assembly error was analyzed for compensation.

Tools and Equipment Modeling for Automobile Interactive Assembling Operating Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu Dianliang; Zhu Hongmin; Shanghai Key Laboratory of Advance Manufacturing Environment

Tools and equipment play an important role in the simulation of virtual assembly, especially in the assembly process simulation and plan. Because of variety in function and complexity in structure and manipulation, the simulation of tools and equipments remains to be a challenge for interactive assembly operation. Based on analysis of details and characteristics of interactive operations for automobile assembly, the functional requirement for tools and equipments of automobile assembly is given. Then, a unified modeling method for information expression and function realization of general tools and equipments is represented, and the handling methods of manual, semi-automatic, automatic tools andmore » equipments are discussed. Finally, the application in assembly simulation of rear suspension and front suspension of Roewe 750 automobile is given. The result shows that the modeling and handling methods are applicable in the interactive simulation of various tools and equipments, and can also be used for supporting assembly process planning in virtual environment.« less

QSRA: a quality-value guided de novo short read assembler.

PubMed

Bryant, Douglas W; Wong, Weng-Keen; Mockler, Todd C

2009-02-24

New rapid high-throughput sequencing technologies have sparked the creation of a new class of assembler. Since all high-throughput sequencing platforms incorporate errors in their output, short-read assemblers must be designed to account for this error while utilizing all available data. We have designed and implemented an assembler, Quality-value guided Short Read Assembler, created to take advantage of quality-value scores as a further method of dealing with error. Compared to previous published algorithms, our assembler shows significant improvements not only in speed but also in output quality. QSRA generally produced the highest genomic coverage, while being faster than VCAKE. QSRA is extremely competitive in its longest contig and N50/N80 contig lengths, producing results of similar quality to those of EDENA and VELVET. QSRA provides a step closer to the goal of de novo assembly of complex genomes, improving upon the original VCAKE algorithm by not only drastically reducing runtimes but also increasing the viability of the assembly algorithm through further error handling capabilities.

A divide-and-conquer algorithm for large-scale de novo transcriptome assembly through combining small assemblies from existing algorithms.

PubMed

Sze, Sing-Hoi; Parrott, Jonathan J; Tarone, Aaron M

2017-12-06

While the continued development of high-throughput sequencing has facilitated studies of entire transcriptomes in non-model organisms, the incorporation of an increasing amount of RNA-Seq libraries has made de novo transcriptome assembly difficult. Although algorithms that can assemble a large amount of RNA-Seq data are available, they are generally very memory-intensive and can only be used to construct small assemblies. We develop a divide-and-conquer strategy that allows these algorithms to be utilized, by subdividing a large RNA-Seq data set into small libraries. Each individual library is assembled independently by an existing algorithm, and a merging algorithm is developed to combine these assemblies by picking a subset of high quality transcripts to form a large transcriptome. When compared to existing algorithms that return a single assembly directly, this strategy achieves comparable or increased accuracy as memory-efficient algorithms that can be used to process a large amount of RNA-Seq data, and comparable or decreased accuracy as memory-intensive algorithms that can only be used to construct small assemblies. Our divide-and-conquer strategy allows memory-intensive de novo transcriptome assembly algorithms to be utilized to construct large assemblies.

40 CFR 60.398 - Innovative technology waivers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Automobile and... Corporation, Wentzville, Missouri, automobile assembly plant. (1) Pursuant to section 111(j) of the Clean Air Act, 42 U.S.C. 7411(j), each topcoat operation at General Motors Corporation automobile assembly plant...

40 CFR 60.398 - Innovative technology waivers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Automobile and... Corporation, Wentzville, Missouri, automobile assembly plant. (1) Pursuant to section 111(j) of the Clean Air Act, 42 U.S.C. 7411(j), each topcoat operation at General Motors Corporation automobile assembly plant...

Comparison of taxon-specific versus general locus sets for targeted sequence capture in plant phylogenomics.

PubMed

Chau, John H; Rahfeldt, Wolfgang A; Olmstead, Richard G

2018-03-01

Targeted sequence capture can be used to efficiently gather sequence data for large numbers of loci, such as single-copy nuclear loci. Most published studies in plants have used taxon-specific locus sets developed individually for a clade using multiple genomic and transcriptomic resources. General locus sets can also be developed from loci that have been identified as single-copy and have orthologs in large clades of plants. We identify and compare a taxon-specific locus set and three general locus sets (conserved ortholog set [COSII], shared single-copy nuclear [APVO SSC] genes, and pentatricopeptide repeat [PPR] genes) for targeted sequence capture in Buddleja (Scrophulariaceae) and outgroups. We evaluate their performance in terms of assembly success, sequence variability, and resolution and support of inferred phylogenetic trees. The taxon-specific locus set had the most target loci. Assembly success was high for all locus sets in Buddleja samples. For outgroups, general locus sets had greater assembly success. Taxon-specific and PPR loci had the highest average variability. The taxon-specific data set produced the best-supported tree, but all data sets showed improved resolution over previous non-sequence capture data sets. General locus sets can be a useful source of sequence capture targets, especially if multiple genomic resources are not available for a taxon.

A comparative evaluation of genome assembly reconciliation tools.

PubMed

Alhakami, Hind; Mirebrahim, Hamid; Lonardi, Stefano

2017-05-18

The majority of eukaryotic genomes are unfinished due to the algorithmic challenges of assembling them. A variety of assembly and scaffolding tools are available, but it is not always obvious which tool or parameters to use for a specific genome size and complexity. It is, therefore, common practice to produce multiple assemblies using different assemblers and parameters, then select the best one for public release. A more compelling approach would allow one to merge multiple assemblies with the intent of producing a higher quality consensus assembly, which is the objective of assembly reconciliation. Several assembly reconciliation tools have been proposed in the literature, but their strengths and weaknesses have never been compared on a common dataset. We fill this need with this work, in which we report on an extensive comparative evaluation of several tools. Specifically, we evaluate contiguity, correctness, coverage, and the duplication ratio of the merged assembly compared to the individual assemblies provided as input. None of the tools we tested consistently improved the quality of the input GAGE and synthetic assemblies. Our experiments show an increase in contiguity in the consensus assembly when the original assemblies already have high quality. In terms of correctness, the quality of the results depends on the specific tool, as well as on the quality and the ranking of the input assemblies. In general, the number of misassemblies ranges from being comparable to the best of the input assembly to being comparable to the worst of the input assembly.

Impact Upon California School Districts of Senate Bill 90 of 1972 and Assembly Bill 1267 of 1973. A Report to the California Legislature as Required by Assembly Concurrent Resolution No. 54.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Bureau of School Apportionments and Reports.

This report analyzes the impact of California's 1972 Senate Bill 90 and 1973 Assembly Bill 1267 as they have affected public school finance in California. The portions of SB 90 and AB 1267 that pertain to operating school districts contain general property tax rollback and revenue limit features, as well as mechanisms designed to lessen the…

Circuit breaker lock out assembly

DOEpatents

Gordy, W.T.

1983-05-18

A lock out assembly for a circuit breaker which consists of a generally step-shaped unitary base with an aperture in the small portion of the step-shaped base and a roughly S shaped retaining pin which loops through the large portion of the step-shaped base. The lock out assembly is adapted to fit over a circuit breaker with the handle switch projecting through the aperture, and the retaining pin projecting into an opening of the handle switch, preventing removal.

Circuit breaker lock out assembly

DOEpatents

Gordy, Wade T.

1984-01-01

A lock out assembly for a circuit breaker which consists of a generally step-shaped unitary base with an aperture in the small portion of the step-shaped base and a roughly "S" shaped retaining pin which loops through the large portion of the step-shaped base. The lock out assembly is adapted to fit over a circuit breaker with the handle switch projecting through the aperture, and the retaining pin projecting into an opening of the handle switch, preventing removal.

Rotor blade assembly having internal loading features

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soloway, Daniel David

Rotor blade assemblies and wind turbines are provided. A rotor blade assembly includes a rotor blade having exterior surfaces defining a pressure side, a suction side, a leading edge and a trailing edge each extending between a tip and a root, the rotor blade defining a span and a chord, the exterior surfaces defining an interior of the rotor blade. The rotor blade assembly further includes a loading assembly, the loading assembly including a weight disposed within the interior and movable generally along the span of the rotor blade, the weight connected to a rotor blade component such that movementmore » of the weight towards the tip causes application of a force to the rotor blade component by the weight. Centrifugal force due to rotation of the rotor blade biases the weight towards the tip.« less

In-orbit assembly mission for the Space Solar Power Station

NASA Astrophysics Data System (ADS)

Cheng, ZhengAi; Hou, Xinbin; Zhang, Xinghua; Zhou, Lu; Guo, Jifeng; Song, Chunlin

2016-12-01

The Space Solar Power Station (SSPS) is a large spacecraft that utilizes solar power in space to supply power to an electric grid on Earth. A large symmetrical integrated concept has been proposed by the China Academy of Space Technology (CAST). Considering its large scale, the SSPS requires a modular design and unitized general interfaces that would be assembled in orbit. Facilities system supporting assembly procedures, which include a Reusable Heavy Lift Launch Vehicle, orbital transfer and space robots, is introduced. An integrated assembly scheme utilizing space robots to realize this platform SSPS concept is presented. This paper tried to give a preliminary discussion about the minimized time and energy cost of the assembly mission under best sequence and route This optimized assembly mission planning allows the SSPS to be built in orbit rapidly, effectively and reliably.

Recent Advances in Multi-component Particles Assembly.

PubMed

Guo, Dan; Song, Yanlin

2018-03-09

Particles assembly and co-assembly have been research frontiers in chemistry and material science in the past few decades. To achieve a large variety of intricate structures and functional materials, remarkable progress has been made in the particle assembly principles and strategies. It can be summarized that the particle assembly is driven by intrinsic interparticle interaction or the external control. In this article, we focus on binary or ternary particles co-assembly and review the principles and feasible strategies. These advances have led to new disciplines of microfabrication technology and material engineering. Although remarked achievement on particle-based structures has been made, it is still challenging to fully develop general and facile strategies to precisely control the one-dimensional (1D) co-assembly. This article reviews the recent development on multi-component particles co-assembly, which significantly increases structural complexity and functional diversity. In particular, we highlight the advances in the particles co-assembly of well-ordered 1D binary superstructures by liquid soft confinement. Finally, prospective outlook for future trends in this field is proposed. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

pH-programmable self-assembly of plasmonic nanoparticles: hydrophobic interaction versus electrostatic repulsion.

PubMed

Li, Weikun; Kanyo, Istvan; Kuo, Chung-Hao; Thanneeru, Srinivas; He, Jie

2015-01-21

We report a general strategy to conceptualize a new design for the pH-programmable self-assembly of plasmonic gold nanoparticles (AuNPs) tethered by random copolymers of poly(styrene-co-acrylic acid) (P(St-co-AA)). It is based on using pH as an external stimulus to reversibly change the surface charge of polymer tethers and to control the delicate balance of interparticle attractive and repulsive interactions. By incorporating -COOH moieties locally within PSt hydrophobic segments, the change in the ionization degree of -COOH moieties can dramatically disrupt the hydrophobic attraction within a close distance. pH acts as a key parameter to control the deprotonation of -COOH moieties and "programs" the assembled nanostructures of plasmonic nanoparticles in a stepwise manner. At a higher solution pH where -COOH groups of polymer tethers became highly deprotonated, electrostatic repulsion dominated the self-assembly and favored the formation of end-to-end, anisotropic assemblies, e.g. 1-D single-line chains. At a lower pH, the less deprotonated -COOH groups led to the decrease of electrostatic repulsion and the side-to-side aggregates, e.g. clusters and multi-line chains of AuNPs, became favorable. The pH-programmable self-assembly allowed us to engineer a "manual" program for a sequential self-assembly by changing the pH of the solution. We demonstrated that the two-step pH-programmable assembly could generate more sophisticated "multi-block" chains using two differently sized AuNPs. Our strategy offers a general means for the programmable design of plasmonic nanoparticles into the specific pre-ordained nanostructures that are potentially useful for the precise control over their plasmon coupling.

SHARC: Space Habitat, Assembly and Repair Center

NASA Technical Reports Server (NTRS)

Colangelo, Todd; Hoetger, Debora; Kuo, Addison; Lo, Michael; Marcus, Leland; Tran, Philip; Tutt, Chris; Wassmuth, Chad; Wildgrube, Gregory

1992-01-01

Integrated Space Systems (ISS) has taken on the task of designing a Space Habitat, Assembly and Repair Center (SHARC) in Low Earth Orbit to meet the future needs of the space program. Our goal is to meet the general requirements given by the 1991/1992 AIAA/LORAL Team Space Design competition with an emphasis on minimizing the costs of such a design. A baseline structural configuration along with preliminary designs of the major subsystems was created. Our initial mission requirements, which were set by AIAA, were that the facility be able to: support simultaneous assembly of three major vehicles; conduct assembly operations and minimal extra vehicular activity (EVA); maintain orbit indefinitely; and assemble components 30 feet long with a 10 foot diameter in a shirtsleeve environment.

29 CFR 1910.305 - Wiring methods, components, and equipment for general use.

Code of Federal Regulations, 2010 CFR

2010-07-01

... distribution center. (B) Conductors shall be run as multiconductor cord or cable assemblies. However, if... persons, feeders may be run as single insulated conductors. (v) The following requirements apply to branch... shall be multiconductor cord or cable assemblies or open conductors. If run as open conductors, they...

29 CFR 1910.305 - Wiring methods, components, and equipment for general use.

Code of Federal Regulations, 2011 CFR

2011-07-01

... distribution center. (B) Conductors shall be run as multiconductor cord or cable assemblies. However, if... persons, feeders may be run as single insulated conductors. (v) The following requirements apply to branch... shall be multiconductor cord or cable assemblies or open conductors. If run as open conductors, they...

29 CFR 1910.305 - Wiring methods, components, and equipment for general use.

Code of Federal Regulations, 2013 CFR

2013-07-01

... distribution center. (B) Conductors shall be run as multiconductor cord or cable assemblies. However, if... persons, feeders may be run as single insulated conductors. (v) The following requirements apply to branch... shall be multiconductor cord or cable assemblies or open conductors. If run as open conductors, they...

29 CFR 1910.305 - Wiring methods, components, and equipment for general use.

Code of Federal Regulations, 2014 CFR

2014-07-01

... distribution center. (B) Conductors shall be run as multiconductor cord or cable assemblies. However, if... persons, feeders may be run as single insulated conductors. (v) The following requirements apply to branch... shall be multiconductor cord or cable assemblies or open conductors. If run as open conductors, they...

29 CFR 1910.305 - Wiring methods, components, and equipment for general use.

Code of Federal Regulations, 2012 CFR

2012-07-01

... distribution center. (B) Conductors shall be run as multiconductor cord or cable assemblies. However, if... persons, feeders may be run as single insulated conductors. (v) The following requirements apply to branch... shall be multiconductor cord or cable assemblies or open conductors. If run as open conductors, they...

46 CFR 56.70-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false General. 56.70-1 Section 56.70-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-1 General. (a) The following generally applies to all types of welding, such...

46 CFR 56.70-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false General. 56.70-1 Section 56.70-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-1 General. (a) The following generally applies to all types of welding, such...

46 CFR 56.70-1 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false General. 56.70-1 Section 56.70-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-1 General. (a) The following generally applies to all types of welding, such...

46 CFR 56.70-1 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false General. 56.70-1 Section 56.70-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-1 General. (a) The following generally applies to all types of welding, such...

Apparatus for adapting an end effector device remotely controlled manipulator arm

NASA Technical Reports Server (NTRS)

Clark, K. H. (Inventor)

1985-01-01

Apparatus for adapting a general purpose and effector device to a special purpose and effector is disclosed which includes an adapter bracket assembly which provides a mechanical and electrical interface between the end effector devices. The adapter bracket assembly includes an adapter connector post which interlocks with a diamond shaped gripping channel formed in closed jaws of the general purpose end effector. The angularly intersecting surfaces of the connector post and gripping channel prevent any relative movement there between. Containment webs constrain the outer finger plates of the general purpose jaws to prevent pitch motion. Electrical interface is provided by conical, self aligning electrical connector components carried by respective ones of said end effectors.

A general design strategy for block copolymer directed self-assembly patterning of integrated circuits contact holes using an alphabet approach.

PubMed

Yi, He; Bao, Xin-Yu; Tiberio, Richard; Wong, H-S Philip

2015-02-11

Directed self-assembly (DSA) is a promising lithography candidate for technology nodes beyond 14 nm. Researchers have shown contact hole patterning for random logic circuits using DSA with small physical templates. This paper introduces an alphabet approach that uses a minimal set of small physical templates to pattern all contacts configurations on integrated circuits. We illustrate, through experiments, a general and scalable template design strategy that links the DSA material properties to the technology node requirements.

Resolving the chronology of the South African landscape through joint inverse modelling of AFT and apatite (U-Th)/He data

NASA Astrophysics Data System (ADS)

Wildman, Mark; Brown, Roderick; Beucher, Romain; Persano, Cristina; Stuart, Finlay

2013-04-01

Application of Low temperature thermochronometry (LTT) is a powerful method of constraining thermal history information on samples as they pass through isotherms in the upper crust. Inverse modelling of LTT data generates thermal history information which can then be correlated with independent datasets to infer geological processes that are responsible for producing the observed thermal history held in the thermochronometry record. A critical consideration when choosing which LTT method to use are the closure temperatures associated with each system. In order to generate more complete and robust thermal histories a single sample can be analysed using multiple low temperature thermochronometers that are sensitive over different but complimentary temperature ranges. The main focus of LTT work in South Africa has been on apatite fission track (AFT) analysis which is a world renowned method of constraining thermal history information between c. 60 and 110±10°C. The general conclusions that have been drawn from the South African AFT dataset is that the present day regional topography represents an eroded remnant of an elevated interior that experienced a significant uplift event with km-scale erosion in the Cretaceous following the break-up of Gondwana [1]. The exact nature of Cretaceous uplift and erosion varies both spatially and temporally, especially in south western Africa where at least two distinct denudation events are recorded at c. 130Ma and 90 Ma [2]. There are, however, alternative views suggesting significant epeirogenic-style uplift and subsequent erosion throughout the Cenozoic [3]. A key aspect of this debate which is yet to be fully resolved is the influence of mantle dynamics on the evolution of the overlying topography. To further investigate the timing and amount of Cenozoic uplift and erosion and to what degree this can be ascribed to dynamic topography, efforts have been made to complement the existing AFT record with Apatite (U-Th)/He analysis (AHe) (e.g. [4]). AHe is ideally suited to this task as it is sensitive over a lower temperature range (c. 40-75±5°C) and can therefore provide insights into erosion on the scale of 1-3 km. Correlating AFT and AHe datasets can be difficult due to variations in U and Th zonation, crystal geometry and structural defects (e.g. radiation damage) altering the closure temperature of the AHe system and resulting in significant dispersion of ages. It is therefore essential to fully understand the major cause of age dispersion and use thermal history modelling techniques that take these factors into account. Here we present a new suite of apatite (U-Th)/He data from samples along the Orange River alongside complimentary apatite fission track data from the same samples. Two samples with a large number of analysed grains, JN2 and GGO2 (23 and 21 grains, respectively) were modelled using HelFrag [5] which takes into account dispersion in AHe ages produced through analysis fragments of larger apatite grains. These modelled histories where compared with inverse modelling using QTQt [6] to extract thermal history information for each of the samples and provide new insights into the post-Cretaceous evolution of the SW African landscape and the behaviour of complex dispersion patterns commonly observed in AHe data sets. [1] Brown, R.W., Summerfield, M.A., and Gleadow, A.J.W., 2002, Denudational history along a transect across the Drakensberg Escarpment of southern Africa derived from apatite fission track thermochronology: Journal of Geophysical Research, v. 107, p. B12, 2350. [2] Kounov, A., Viola, G., de Wit, M., and Andreoli, M.A.G., 2009, Denudation along the Atlantic passive margin: new insights from apatite fission-track analysis on the western coast of South Africa: Geological Society, London, Special Publications, v. 324, p. 287-306. [3] Partridge, T.C., and Maud, R.R., 1987, Geomorphic evolution of southern Africa since the Mesozoic: South African Journal of Geology, v. 90, p. 179-208 [4] Flowers, R.M., and Schoene, B., 2010, (U-Th)/He thermochronometry constraints on unroofing of the eastern Kaapvaal craton and significance for uplift of the southern Africa Plateau: Geology, v. 38, p. 827-830. [5] Gallagher, K., 2012, Transdimensional inverse thermal history modeling for quantitative thermochronology: Journal of Geophysical Research, v. 117, p. 16. [6] Brown, R.W., Beucher, R., Roper, S., Gallagher, K., Persano, C. and Stuart, F., 2012, How to derive robust thermal histories from 'over-dispersed' single crystal apatite (U-Th)/He ages, Geophysical Research Abstracts, Vol. 14, EGU2012-11828, 2012, EGU General Assembly 2012

Evaluation of the magnitude and effects of bundle duct interaction in fuel assemblies at developmental plant conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Serell, D.C.; Kaplan, S.

1980-09-01

Purpose of this evaluation is to estimate the magnitude and effects of irradiation and creep induced fuel bundle deformations in the developmental plant. This report focuses on the trends of the results and the ability of present models to evaluate the assembly temperatures in the presence of bundle deformation. Although this analysis focuses on the developmental plant, the conclusions are applicable to LMFBR fuel assemblies in general if they have wire spacers.

Liquid-liquid interfacial nanoparticle assemblies

DOEpatents

Emrick, Todd S [South Deerfield, MA; Russell, Thomas P [Amherst, MA; Dinsmore, Anthony [Amherst, MA; Skaff, Habib [Amherst, MA; Lin, Yao [Amherst, MA

2008-12-30

Self-assembly of nanoparticles at the interface between two fluids, and methods to control such self-assembly process, e.g., the surface density of particles assembling at the interface; to utilize the assembled nanoparticles and their ligands in fabrication of capsules, where the elastic properties of the capsules can be varied from soft to tough; to develop capsules with well-defined porosities for ultimate use as delivery systems; and to develop chemistries whereby multiple ligands or ligands with multiple functionalities can be attached to the nanoparticles to promote the interfacial segregation and assembly of the nanoparticles. Certain embodiments use cadmium selenide (CdSe) nanoparticles, since the photoluminescence of the particles provides a convenient means by which the spatial location and organization of the particles can be probed. However, the systems and methodologies presented here are general and can, with suitable modification of the chemistries, be adapted to any type of nanoparticle.

Constrained space camera assembly

DOEpatents

Heckendorn, Frank M.; Anderson, Erin K.; Robinson, Casandra W.; Haynes, Harriet B.

1999-01-01

A constrained space camera assembly which is intended to be lowered through a hole into a tank, a borehole or another cavity. The assembly includes a generally cylindrical chamber comprising a head and a body and a wiring-carrying conduit extending from the chamber. Means are included in the chamber for rotating the body about the head without breaking an airtight seal formed therebetween. The assembly may be pressurized and accompanied with a pressure sensing means for sensing if a breach has occurred in the assembly. In one embodiment, two cameras, separated from their respective lenses, are installed on a mounting apparatus disposed in the chamber. The mounting apparatus includes means allowing both longitudinal and lateral movement of the cameras. Moving the cameras longitudinally focuses the cameras, and moving the cameras laterally away from one another effectively converges the cameras so that close objects can be viewed. The assembly further includes means for moving lenses of different magnification forward of the cameras.

Quantitative self-assembly prediction yields targeted nanomedicines

NASA Astrophysics Data System (ADS)

Shamay, Yosi; Shah, Janki; Işık, Mehtap; Mizrachi, Aviram; Leibold, Josef; Tschaharganeh, Darjus F.; Roxbury, Daniel; Budhathoki-Uprety, Januka; Nawaly, Karla; Sugarman, James L.; Baut, Emily; Neiman, Michelle R.; Dacek, Megan; Ganesh, Kripa S.; Johnson, Darren C.; Sridharan, Ramya; Chu, Karen L.; Rajasekhar, Vinagolu K.; Lowe, Scott W.; Chodera, John D.; Heller, Daniel A.

2018-02-01

Development of targeted nanoparticle drug carriers often requires complex synthetic schemes involving both supramolecular self-assembly and chemical modification. These processes are generally difficult to predict, execute, and control. We describe herein a targeted drug delivery system that is accurately and quantitatively predicted to self-assemble into nanoparticles based on the molecular structures of precursor molecules, which are the drugs themselves. The drugs assemble with the aid of sulfated indocyanines into particles with ultrahigh drug loadings of up to 90%. We devised quantitative structure-nanoparticle assembly prediction (QSNAP) models to identify and validate electrotopological molecular descriptors as highly predictive indicators of nano-assembly and nanoparticle size. The resulting nanoparticles selectively targeted kinase inhibitors to caveolin-1-expressing human colon cancer and autochthonous liver cancer models to yield striking therapeutic effects while avoiding pERK inhibition in healthy skin. This finding enables the computational design of nanomedicines based on quantitative models for drug payload selection.

Rtop - an R package for interpolation along the stream network

NASA Astrophysics Data System (ADS)

Skøien, J. O.; Laaha, G.; Koffler, D.; Blöschl, G.; Pebesma, E.; Parajka, J.; Viglione, A.

2012-04-01

Geostatistical methods have a long tradition within analysis of data that can be conceptualized as simple point data, such as soil properties, or for regular blocks, such as mining data. However, these methods have been used to a limited extent for estimation along stream networks. A few exceptions are given by (Gottschalk 1993, Sauquet et al. 2000, Gottschalk et al. 2006, Skøien et al. 2006), and an overview by Laaha and Blöschl (2011). Interpolation of runoff characteristics are more complicated than the traditional random variables estimated by geostatistical methods, as the measurements have a more complicated support, and many catchments are nested. Skøien et al. (2006) presented the model Top-kriging which takes these effects into account for interpolation of stream flow characteristics (exemplified by the 100 year flood). The method has here been implemented as a package in the open source statistical environment R (R Development Core Team 2011). Taking advantage of the existing methods in R for working with spatial objects, and the extensive possibilities for visualizing the result, this makes it considerably easier to apply the method on new data sets, in comparison to earlier implementation of the method. In addition to user feedback, the package has also been tested by colleagues whose only responsibility has been to search for bugs, inconsistencies and shortcomings of the documentation. The last part is often the part that gets the least attention in small open source projects, and we have solved this by acknowledging their effects as co-authors. The model will soon be uploaded to CRAN, but is in the meantime also available from R-forge and can be installed by: > install.packages("rtop", repos="http://R-Forge.R-project.org") Gottschalk, L., 1993. Interpolation of runoff applying objective methods. Stochastic Hydrology and Hydraulics, 7, 269-281. Gottschalk, L., Krasovskaia, I., Leblois, E. & Sauquet, E., 2006. Mapping mean and variance of runoff in a river basin. Hydrology and Earth System Sciences, 10, 469-484. Laaha, G. & Blöschl, G. 2011. Geostatistics on river networks - a reviewed. EGU General Assembly, Vienna, Austria. R Development Core Team, 2011. R: A language and environment for statistical computing. Vienna, Austria, ISBN 3-900051-07-0. Sauquet, E., Gottschalk, L. & Leblois, E., 2000. Mapping average annual runoff: A hierarchical approach applying a stochastic interpolation scheme. Hydrological Sciences Journal, 45 (6), 799-815. Skøien, J.O., Merz, R. & Blöschl, G., 2006. Top-kriging - geostatistics on stream networks. Hydrology and Earth System Sciences, 10, 277-287.

Ignimbrites of Armenia - Paleomagnetic constraints on flow direction and stratigraphy of pyroclastic activity of Mount Aragats

NASA Astrophysics Data System (ADS)

Kirscher, Uwe; Meliksetian, Khachatur; Gevorgyan, Hripsime; Navasardyan, Gevorg; Bachtadse, Valerian

2017-04-01

The Aragats volcano is one of the largest stratovolcanoes within the Turkish-Armenian-Iranian orogenic plateau. It is located close to the Armenian capital Yerevan, and only 30 km from the only nuclear power plant within the country. Additional to numerous lava flows, Mount Aragats is thought to be the source of at least two large pyroclastic eruptions leading to a huge number of ignimbrite outcrops, which are located surrounding Mount Aragats with an evaluated eruption radius of 50 km. The age of several ignimbrite outcrops has recently been determined to be 0.65 Ma (Meliksetian et al., 2014). The different ignimbrite flows are characterized by huge diversity of colors, degree of welding and textures. Due to that reason some disagreement exist on how these outcrops can be linked and how the eruption process actually happened in terms of different eruption phases and mixing mechanism of magmas during the eruption. To add constraints to this debate we carried out an intensive paleomagnetic investigation on most of the ignimbrite outcrops (32 sites) in terms of directional and anisotropy measurements. Paleomagnetic directional measurements yield basically two polarities: (1) a well grouped normal polarity is present in the majority of the studied sites including 3 sites which have supposedly originated from a different vent located on Turkish territory in the west; (2) a reversed polarity of the remaining sites with a somewhat increased scatter. Based on secular variation arguments and considering the high quality of the data we suggest that at least all young outcrops represent a single eruption phase in the area at 0.65 Ma, which is in agreement with an occurrence during the Brunhes geomagnetic chron. Additional to that, at least one earlier phase of pyroclastic activity took place prior to the Brunhes-Matuyama boundary (0.781 Ma). Anisotropy of magnetic susceptibility (AMS) suggests initial radial flow directions, which shortly after the eruption become topographically controlled. Such explosive eruptions with VEI≥5 are usually considered among most hazardous volcanic phenomena, therefore detailed multidisciplinary studies of such events occurred in the past are significantly important to estimate recurrence rates of such eruptions, their magnitudes to probabilistically access potential volcanic hazards to populated places and critical infrastructure. Melisketian, K., Savov, I., Connor, C., Halama, R., Jrbashyan, R., Navasardyan, G., Ghukasyan, Y., Gevorgyan, H., Manucharyan, D., Ishizuka, O., Quidelleur, X., Germa, A., 2014. Aragats stratovolcano in Armenia - volcano-stratigraphy and petrology. EGU General Assembly Conference Abstracts 16, 567.

Influential factors on debris flow events and hillslope-channel connectivity in Alpine regions: case studies from two Alpine regions in Styria, Austria

NASA Astrophysics Data System (ADS)

Traper, Sandra; Pöppl, Ronald; Rascher, Eric; Sass, Oliver

2016-04-01

In recent times different types of natural disasters like debris flow events have attracted increasing attention worldwide, since they can cause great damage and loss of infrastructure or even lives is not unusual when it comes to such an event. The engagement with debris flows is especially important in mountainous areas like Austria, since Alpine regions have proved to be particularly prone to the often harmful consequences of such events because of increasing settlement of previously uninhabited regions. Due to those frequently damaging effects of debris flows, research on this kind of natural disaster often focuses on mitigation and recovery measures after an event and on how to restore the initial situation. However, a view on the situation of an area, where severe debris flows recently occurred and are well documented, before the actual event can aid in discovering important preparatory factors that contribute to initiating debris flows and hillslope-channel connectivity in the first place. Valuable insights into the functioning and preconditions of debris flows and their potential connectivity to the main channel can be gained. The study focuses on two geologically different areas in the Austrian Alps, which are both prone to debris flows and have experienced rather severe events recently. Based on data from debris flow events in two regions in Styria (Austria), the Kleinsölk and the Johnsbach valleys, the aim of the study is to identify factors which influence the development of debris flows and the potential of such debris flows to reach the main channel potentially clogging up the river (hillslope-channel connectivity). The degree of hillslope-channel coupling was verified in extensive TLS and ALS surveys, resulting in DEMs of different resolution and spatial extension. Those factors are obtained, analyzed and evaluated with DEM-based GIS- and statistical analyses. These include factors that are attributed to catchment topography, such as slope angle, curvature, size, shape as well as topographic channel parameters. Together with factors of land cover/use and lithology those features provide the independent variables for further statistical analyses. With the help of several logistic regressions the likelihoods of influencing topographical and lithological factors and factors of land cover/use leading to debris flow events and those for debris flows to reach the main channel (hillslope-channel connectivity) are computed. First results will be presented at the EGU General Assembly 2016.

Thermal Evolution of Juvenile Subduction Zones ' New Constraints from Lu-Hf Geochronology on HP oceanic rocks (Halilbaǧi, Central Anatolia)

NASA Astrophysics Data System (ADS)

Pourteau, Amaury; Scherer, Erik; Schmidt, Alexander; Bast, Rebecca

2015-04-01

The thermal structure of subduction zones plays a key role on mechanical and chemical processes taking place along the slab-mantle interface. Until now, changes through time of this thermal structure have been explored mostly by the means of numerical simulations. However, both "warm" (i.e., epidote-bearing), and "cold" (i.e., lawsonite-bearing) HP oceanic rocks have been reported in some fossil subduction complexes exposed at the Earth's surface (e.g., Franciscan Complex, California; Rio San Juan Complex, Hispañola; Halilbağı Unit, Central Anatolia). These a-priori "incompatible" rocks witness different thermal stages of ancient subduction zones and their study might provide complementary constraints to numerical models. To decipher the meaning of these contrasting metamorphic rocks in the Halilbağı Unit, we are carrying out Lu-Hf geochronology on garnet (grt) and lws from a variety of HP oceanic rocks, as well as the metamorphic sole of the overlying ophiolite. We selected five samples that are representative of the variety of metamorphic evolutions (i.e. peak conditions and P-T paths) encountered in this area. Preliminary analyses yielded 110 Ma (grt-hbl isochron) for a sub-ophiolitic grt amphibolite; 92 Ma (grt-omp) for an eclogite with prograde and retrograde ep; 90 Ma (grt-omp) for an eclogitic metabasite with prograde ep and retrograde ep+lws; 87 Ma (grt-gln) for a lws eclogite with prograde ep; and 86 Ma (grt-gln) for a blueschist with prograde and retrograde lws. These ages are mainly two-point isochrons. Further-refined data will be presented at the EGU General Assembly 2015, in Vienna. The consistent younging trend from "warm" to "cold" metamorphic rocks revealed by these first-order results points to metamorphic-sole formation during the initiation of intra-oceanic subduction at ~110 Ma, and subsequent cooling of the slab-mantle interface between 92 and 86 Ma. Therefore, the contrasting metamorphic evolutions encountered in the Halilbağı Unit record the progressive thermal maturation of the juvenile Neotethyan subduction zone. This period of ~23 myr between subduction initiation and thermal "steady state" is significantly shorter than that obtained for the Rio San Juan Complex (~60 myr; Krebs et al. 2008, Lithos, 103, 106-137), but compares well with that for the Franciscan Complex (~22 myr; Anczkiewicz et al. 2004, EPSL, 225, 147-161) and falls in the range predicted in numerical simulations (e.g., Gerya et al. 2002, Tectonics, 21/6, 1056).

A physical data model for fields and agents

NASA Astrophysics Data System (ADS)

de Jong, Kor; de Bakker, Merijn; Karssenberg, Derek

2016-04-01

Two approaches exist in simulation modeling: agent-based and field-based modeling. In agent-based (or individual-based) simulation modeling, the entities representing the system's state are represented by objects, which are bounded in space and time. Individual objects, like an animal, a house, or a more abstract entity like a country's economy, have properties representing their state. In an agent-based model this state is manipulated. In field-based modeling, the entities representing the system's state are represented by fields. Fields capture the state of a continuous property within a spatial extent, examples of which are elevation, atmospheric pressure, and water flow velocity. With respect to the technology used to create these models, the domains of agent-based and field-based modeling have often been separate worlds. In environmental modeling, widely used logical data models include feature data models for point, line and polygon objects, and the raster data model for fields. Simulation models are often either agent-based or field-based, even though the modeled system might contain both entities that are better represented by individuals and entities that are better represented by fields. We think that the reason for this dichotomy in kinds of models might be that the traditional object and field data models underlying those models are relatively low level. We have developed a higher level conceptual data model for representing both non-spatial and spatial objects, and spatial fields (De Bakker et al. 2016). Based on this conceptual data model we designed a logical and physical data model for representing many kinds of data, including the kinds used in earth system modeling (e.g. hydrological and ecological models). The goal of this work is to be able to create high level code and tools for the creation of models in which entities are representable by both objects and fields. Our conceptual data model is capable of representing the traditional feature data models and the raster data model, among many other data models. Our physical data model is capable of storing a first set of kinds of data, like omnipresent scalars, mobile spatio-temporal points and property values, and spatio-temporal rasters. With our poster we will provide an overview of the physical data model expressed in HDF5 and show examples of how it can be used to capture both object- and field-based information. References De Bakker, M, K. de Jong, D. Karssenberg. 2016. A conceptual data model and language for fields and agents. European Geosciences Union, EGU General Assembly, 2016, Vienna.

Investigation and incorporation of water inflow uncertainties through stochastic modelling in a combined optimisation methodology for water allocation in Alfeios River (Greece)

NASA Astrophysics Data System (ADS)

Bekri, Eleni; Yannopoulos, Panayotis; Disse, Markus

2014-05-01

The Alfeios River plays a vital role for Western Peloponnisos in Greece from natural, ecological, social and economic aspect. The main river and its six tributaries, forming the longest watercourse and the highest streamflow rate of Peloponnisose, represent a significant source of water supply for the region, aiming at delivering and satisfying the expected demands from a variety of water users, including irrigation, drinking water supply, hydropower production and recreation. In the previous EGU General Assembly, a fuzzy-boundary-interval linear programming methodology, based on Li et al. (2010) and Bekri et al. (2012), has been presented for optimal water allocation under uncertain and vague system conditions in the Alfeios River Basin. Uncertainties associated with the benefit and cost coefficient in the objective function of the main water uses (hydropower production and irrigation) were expressed as probability distributions and fuzzy boundary intervals derived by associated α-cut levels. The uncertainty of the monthly water inflows was not incorporated in the previous initial application and the analysis of all other sources of uncertainty has been applied to two extreme hydrologic years represented by a selected wet and dry year. To manage and operate the river system, decision makers should be able to analyze and evaluate the impact of various hydrologic scenarios. In the present work, the critical uncertain parameter of water inflows is analyzed and its incorporation as an additional type of uncertainty in the suggested methodology is investigated, in order to enable the assessment of optimal water allocation for hydrologic and socio-economic scenarios based both on historical data and projected climate change conditions. For this purpose, stochastic simulation analysis for a part of the Alfeios river system is undertaken, testing various stochastic models from simple stationary ones (AR and ARMA), Thomas-Fiering, ARIMA as well as more sophisticated and complete such as CASTALIA. A short description and comparison of their assumptions, the differences between them and the presentation of the results are included. Li, Y.P., Huang, G.H. and S.L., Nie, (2010), Planning water resources management systems using a fuzzy boundary interval-stochastic programming method, Elsevier Ltd, Advances in Water Resources, 33: 1105-1117. doi:10.1016/j.advwatres.2010.06.015 Bekri, E.S., Disse, M. and P.C.,Yannopoulos, (2012), Methodological framework for correction of quick river discharge measurements using quality characteristics, Session of Environmental Hydraulics - Hydrodynamics, 2nd Common Conference of Hellenic Hydrotechnical Association and Greek Committee for Water Resources Management, Volume: 546-557 (in Greek).

Geological mapping of the Kuiper quadrangle (H06) of Mercury

NASA Astrophysics Data System (ADS)

Giacomini, Lorenza; Massironi, Matteo; Galluzzi, Valentina

2017-04-01

Kuiper quadrangle (H06) is located at the equatorial zone of Mercury and encompasses the area between longitudes 288°E - 360°E and latitudes 22.5°N - 22.5°S. The quadrangle was previously mapped for its most part by De Hon et al. (1981) that, using Mariner10 data, produced a final 1:5M scale map of the area. In this work we present the preliminary results of a more detailed geological map (1:3M scale) of the Kuiper quadrangle that we compiled using the higher resolution of MESSENGER data. The main basemap used for the mapping is the MDIS (Mercury Dual Imaging System) 166 m/pixel BDR (map-projected Basemap reduced Data Record) mosaic. Additional datasets were also taken into account, such as DLR stereo-DEM of the region (Preusker et al., 2016), global mosaics with high-incidence illumination from the east and west (Chabot et al., 2016) and MDIS global color mosaic (Denevi et al., 2016). The preliminary geological map shows that the western part of the quadrangle is characterized by a prevalence of crater materials (i.e. crater floor, crater ejecta) which were distinguished into three classes on the basis of their degradation degree (Galluzzi et al., 2016). Different plain units were also identified and classified as: (i) intercrater plains, represented by densely cratered terrains, (ii) intermediate plains, which are terrains with a moderate density of superposed craters, and (iii) smooth plains, which are poorly cratered volcanic deposits emplaced mainly on the larger crater floors. Finally, several structures were mapped all over the quadrangle. Most of these features are represented by thrusts, some of which appear to form systematic alignments. In particular, two main thrust systems have been identified: i) the "Thakur" system, a 1500 km-long system including several scarps with a NNE-SSW orientation, located at the edge between the Kuiper and Beethoven (H07) quadrangles; ii) the "Santa Maria" system, located at the centre of the quadrangle. It is a 1700 km-long system encompassing faults with a prevalent NNW-SSE orientation. Once the mapping activity is accomplished, the geological map of Kuiper quadrangle will be integrated into the global 1:3M geological map of Mercury (Galluzzi et al., 2017). References Chabot et al., 2016, LPS XLVII, #1256. De Hon et al., 1981, IMAP #1233. Denevi et al., 2016 LPS XLVII, #1264. Galluzzi et al., 2016, Geology, J. Maps, 12, 226-238. Galluzzi et al., 2017, EGU General Assembly 2017, #13822. Preusker et al., 2016, Earth and Planet. Astrophys., arXiv:1608.08487.

Inverse Problem in Self-assembly

NASA Astrophysics Data System (ADS)

Tkachenko, Alexei

2012-02-01

By decorating colloids and nanoparticles with DNA, one can introduce highly selective key-lock interactions between them. This leads to a new class of systems and problems in soft condensed matter physics. In particular, this opens a possibility to solve inverse problem in self-assembly: how to build an arbitrary desired structure with the bottom-up approach? I will present a theoretical and computational analysis of the hierarchical strategy in attacking this problem. It involves self-assembly of particular building blocks (``octopus particles''), that in turn would assemble into the target structure. On a conceptual level, our approach combines elements of three different brands of programmable self assembly: DNA nanotechnology, nanoparticle-DNA assemblies and patchy colloids. I will discuss the general design principles, theoretical and practical limitations of this approach, and illustrate them with our simulation results. Our crucial result is that not only it is possible to design a system that has a given nanostructure as a ground state, but one can also program and optimize the kinetic pathway for its self-assembly.

Soft Assembling Project-Based Learning and Leadership in Japan

ERIC Educational Resources Information Center

Knight, Kevin; Murphey, Tim

2017-01-01

In this article, we initially focus on how the conceptualization of leadership by Knight (2013a) in his leadership seminars became the basis for choosing a project-based learning (PBL) approach. We then consider how soft assembling can enhance the leadership project activities of student teams and group-work in general classes. Soft assembling…

Creating Better Citizens? Effects of a Model Citizens' Assembly on Student Political Attitudes and Behavior

ERIC Educational Resources Information Center

Gershtenson, Joseph; Rainey, Glenn W., Jr.; Rainey, Jane G.

2010-01-01

Perceiving political engagement to be dangerously low among American citizens, many political science professors in recent years have attempted to promote engagement and "healthier" political attitudes. The effectiveness of these efforts appears variable and generally quite modest. Following the model of Canadian citizens' assemblies, we…

Installation and Assembly, Electrical Ground Support Equipment (GSE), Specification for

NASA Technical Reports Server (NTRS)

Denson, Erik C.

2014-01-01

This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit and fittings, cable trays and accessories, interconnecting cables (including routing requirements), motor-control equipment, and necessary hardware as specified by the applicable contract and drawings.

RNA packaging of MRFV virus-like particles: The interplay between RNA pools and capsid coat protein

USDA-ARS?s Scientific Manuscript database

Virus-like particles (VLPs) can be produced through self-assembly of capsid protein (CP) into particles with discrete shapes and sizes and containing different types of RNA molecules. The general principle that governs particle assembly and RNA packaging is determined by unique interactions between ...

76 FR 1983 - Airworthiness Directives; The Boeing Company Model MD-11 and MD-11F Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... assemblies of the tail tank fuel system, a wiring change, and corrective actions if necessary. This AD also requires, for certain airplanes, a general visual inspection for correct installation of the self-adhering high-temperature electrical insulation tape; installation of a wire assembly support bracket and...

An Integer Programming-Based Generalized Vehicle Routing Approach for Printed Circuit Board Assembly Optimization

ERIC Educational Resources Information Center

Seth, Anupam

2009-01-01

Production planning and scheduling for printed circuit, board assembly has so far defied standard operations research approaches due to the size and complexity of the underlying problems, resulting in unexploited automation flexibility. In this thesis, the increasingly popular collect-and-place machine configuration is studied and the assembly…

29 CFR 1917.44 - General rules applicable to vehicles. 4

Code of Federal Regulations, 2012 CFR

2012-07-01

... shall first be deflated by valve core removal; and (ix) Before assembly, wheel components shall be... outside the frame of the device for any wheel position within the device. When the wheel assembly is... trailer road wheels prior to disconnection of the trailer and until braking is again provided. Section 49...

29 CFR 1917.44 - General rules applicable to vehicles. 4

Code of Federal Regulations, 2013 CFR

2013-07-01

... shall first be deflated by valve core removal; and (ix) Before assembly, wheel components shall be... outside the frame of the device for any wheel position within the device. When the wheel assembly is... trailer road wheels prior to disconnection of the trailer and until braking is again provided. Section 49...

29 CFR 1917.44 - General rules applicable to vehicles. 4

Code of Federal Regulations, 2014 CFR

2014-07-01

... shall first be deflated by valve core removal; and (ix) Before assembly, wheel components shall be... outside the frame of the device for any wheel position within the device. When the wheel assembly is... trailer road wheels prior to disconnection of the trailer and until braking is again provided. Section 49...

75 FR 36577 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... pump wire harness assembly is routed within the tire burst area and that installing and routing a new and longer auxiliary hydraulic pump wire harness assembly outside the tire burst area will minimize... general visual inspection of the wire harness protective sleeving dimensions, which are related...

Thermal vacuum life test facility for radioisotope thermoelectric generators

NASA Astrophysics Data System (ADS)

Deaton, R. L.; Goebel, C. J.; Amos, W. R.

In the late 1970's, the Department of Energy (DOE) assigned Monsanto Research Corporation, Mound Facility, now operated by EG and G Mound Applied Technologies, the responsibility for assembling and testing General Purpose Heat Source (GPHS) radioisotope thermoelectric generators (RTGs). Assembled and tested were five RTGs, which included four flight units and one non-flight qualification unit. Figure 1 shows the RTG, which was designed by General Electric AstroSpace Division (GE/ASD) to produce 285 W of electrical power. A detailed description of the processes for RTG assembly and testing is presented by Amos and Goebel (1989). The RTG performance data are described by Bennett, et al., (1986). The flight units will provide electrical power for the National Aeronautics and Space Administration's (NASA) Galileo mission to Jupiter (two RTGs) and the joint NASA/European Space Agency (ESA) Ulysses mission to study the polar regions of the sun (one RTG). The remaining flight unit will serve as the spare for both missions, and a non-flight qualification unit was assembled and tested to ensure that performance criteria were adequately met.

Spent fuel burnup estimation by Cerenkov glow intensity measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuribara, Masayuki

1994-10-01

The Cerenkov glow images from irradiated fuel assemblies of boiling-water reactors (BWR) and pressurized-water reactors (PWR) are generally used for inspections. For this purpose, a new UV-I.I. CVD (ultra-violet light image intensifier Cerenkov viewing device), has been developed. This new device can measure the intensity of the Cerenkov glow from a spent fuel assembly, thus making it possible to estimate the burnup of the fuel assembly by comparing the Cerenkov glow intensity to the reference intensity. The experiment was carried out on BWR spent fuel assemblies and the results show that burnups are estimated within 20% accuracy compared to themore » declared burnups for the tested spent fuel assemblies for cooling times ranging from 900--2.000 d.« less

Computational Design of Self-Assembling Protein Nanomaterials with Atomic Level Accuracy

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Neil P.; Sheffler, William; Sawaya, Michael R.

2015-09-17

We describe a general computational method for designing proteins that self-assemble to a desired symmetric architecture. Protein building blocks are docked together symmetrically to identify complementary packing arrangements, and low-energy protein-protein interfaces are then designed between the building blocks in order to drive self-assembly. We used trimeric protein building blocks to design a 24-subunit, 13-nm diameter complex with octahedral symmetry and a 12-subunit, 11-nm diameter complex with tetrahedral symmetry. The designed proteins assembled to the desired oligomeric states in solution, and the crystal structures of the complexes revealed that the resulting materials closely match the design models. The method canmore » be used to design a wide variety of self-assembling protein nanomaterials.« less

Field-induced assembly of colloidal ellipsoids into well-defined microtubules

PubMed Central

Crassous, Jérôme J.; Mihut, Adriana M.; Wernersson, Erik; Pfleiderer, Patrick; Vermant, Jan; Linse, Per; Schurtenberger, Peter

2014-01-01

Current theoretical attempts to understand the reversible formation of stable microtubules and virus shells are generally based on shape-specific building blocks or monomers, where the local curvature of the resulting structure is explicitly built-in via the monomer geometry. Here we demonstrate that even simple ellipsoidal colloids can reversibly self-assemble into regular tubular structures when subjected to an alternating electric field. Supported by model calculations, we discuss the combined effects of anisotropic shape and field-induced dipolar interactions on the reversible formation of self-assembled structures. Our observations show that the formation of tubular structures through self-assembly requires much less geometrical and interaction specificity than previously thought, and advance our current understanding of the minimal requirements for self-assembly into regular virus-like structures. PMID:25409686

Micro-Masonry: Construction of 3D Structures by Mesoscale Self-Assembly

PubMed Central

Fernandez, Javier G.; Khademhosseini, Ali

2010-01-01

A general method for construction of three dimensional structures by directed assembly of microscale polymeric sub-units is presented. Shape-controlled microgels are directed to assemble into different shapes by limiting their movement onto a molded substrate. The capillary forces, resulting from the presence of a liquid polymer, assemble the microgels in close contact with the rest of the units and with the free surface, the latter imposing the final geometry of the resulting construct. The result is a freestanding structure composed of one or multiple layers of sub-units assembled in a tightly packed conformation. The applicability of the technique for the construction of scaffolds with cell-laden sub-units is demonstrated. In addition, scaffolds formed by the sequential aggregation of sub-units are produced. PMID:20440697

HSP90 and its R2TP/Prefoldin-like cochaperone are involved in the cytoplasmic assembly of RNA polymerase II.

PubMed

Boulon, Séverine; Pradet-Balade, Bérengère; Verheggen, Céline; Molle, Dorothée; Boireau, Stéphanie; Georgieva, Marya; Azzag, Karim; Robert, Marie-Cécile; Ahmad, Yasmeen; Neel, Henry; Lamond, Angus I; Bertrand, Edouard

2010-09-24

RNA polymerases are key multisubunit cellular enzymes. Microscopy studies indicated that RNA polymerase I assembles near its promoter. However, the mechanism by which RNA polymerase II is assembled from its 12 subunits remains unclear. We show here that RNA polymerase II subunits Rpb1 and Rpb3 accumulate in the cytoplasm when assembly is prevented and that nuclear import of Rpb1 requires the presence of all subunits. Using MS-based quantitative proteomics, we characterized assembly intermediates. These included a cytoplasmic complex containing subunits Rpb1 and Rpb8 associated with the HSP90 cochaperone hSpagh (RPAP3) and the R2TP/Prefoldin-like complex. Remarkably, HSP90 activity stabilized incompletely assembled Rpb1 in the cytoplasm. Our data indicate that RNA polymerase II is built in the cytoplasm and reveal quality-control mechanisms that link HSP90 to the nuclear import of fully assembled enzymes. hSpagh also bound the free RPA194 subunit of RNA polymerase I, suggesting a general role in assembling RNA polymerases. Copyright © 2010 Elsevier Inc. All rights reserved.

HSP90 and Its R2TP/Prefoldin-like Cochaperone Are Involved in the Cytoplasmic Assembly of RNA Polymerase II

PubMed Central

Boireau, Stéphanie; Georgieva, Marya; Azzag, Karim; Robert, Marie-Cécile; Ahmad, Yasmeen; Neel, Henry; Lamond, Angus I.; Bertrand, Edouard

2015-01-01

SUMMARY RNA polymerases are key multisubunit cellular enzymes. Microscopy studies indicated that RNA polymerase I assembles near its promoter. However, the mechanism by which RNA polymerase II is assembled from its 12 subunits remains unclear. We show here that RNA polymerase II subunits Rpb1 and Rpb3 accumulate in the cytoplasm when assembly is prevented and that nuclear import of Rpb1 requires the presence of all subunits. Using MS-based quantitative proteomics, we characterized assembly intermediates. These included a cytoplasmic complex containing subunits Rpb1 and Rpb8 associated with the HSP90 cochaperone hSpagh (RPAP3) and the R2TP/Prefoldin-like complex. Remarkably, HSP90 activity stabilized incompletely assembled Rpb1 in the cytoplasm. Our data indicate that RNA polymerase II is built in the cytoplasm and reveal quality-control mechanisms that link HSP90 to the nuclear import of fully assembled enzymes. hSpagh also bound the free RPA194 subunit of RNA polymerase I, suggesting a general role in assembling RNA polymerases. PMID:20864038

Effects of short read quality and quantity on a de novo vertebrate transcriptome assembly.

PubMed

Garcia, T I; Shen, Y; Catchen, J; Amores, A; Schartl, M; Postlethwait, J; Walter, R B

2012-01-01

For many researchers, next generation sequencing data holds the key to answering a category of questions previously unassailable. One of the important and challenging steps in achieving these goals is accurately assembling the massive quantity of short sequencing reads into full nucleic acid sequences. For research groups working with non-model or wild systems, short read assembly can pose a significant challenge due to the lack of pre-existing EST or genome reference libraries. While many publications describe the overall process of sequencing and assembly, few address the topic of how many and what types of reads are best for assembly. The goal of this project was use real world data to explore the effects of read quantity and short read quality scores on the resulting de novo assemblies. Using several samples of short reads of various sizes and qualities we produced many assemblies in an automated manner. We observe how the properties of read length, read quality, and read quantity affect the resulting assemblies and provide some general recommendations based on our real-world data set. Published by Elsevier Inc.

Nonequilibrium Self-Assembly of π-Conjugated Oligopeptides in Solution.

PubMed

Li, Bo; Li, Songsong; Zhou, Yuecheng; Ardoña, Herdeline Ann M; Valverde, Lawrence R; Wilson, William L; Tovar, John D; Schroeder, Charles M

2017-02-01

Supramolecular assembly is a powerful method that can be used to generate materials with well-defined structures across multiple length scales. Supramolecular assemblies consisting of biopolymer-synthetic polymer subunits are specifically known to exhibit exceptional structural and functional diversity as well as programmable control of noncovalent interactions through hydrogen bonding in biopolymer subunits. Despite recent progress, there is a need to control and quantitatively understand assembly under nonequilibrium conditions. In this work, we study the nonequilibrium self-assembly of π-conjugated synthetic oligopeptides using a combination of experiments and analytical modeling. By isolating an aqueous peptide solution droplet within an immiscible organic layer, the rate of peptide assembly in the aqueous solution can be controlled by tuning the transport rate of acid that is used to trigger assembly. Using this approach, peptides are guided to assemble under reaction-dominated and diffusion-dominated conditions, with results showing a transition from a diffusion-limited reaction front to spatially homogeneous assembly as the transport rate of acid decreases. Interestingly, our results show that the morphology of self-assembled peptide fibers is controlled by the assembly kinetics such that increasingly homogeneous structures of self-assembled synthetic oligopeptides were generally obtained using slower rates of assembly. We further developed an analytical reaction-diffusion model to describe oligopeptide assembly, and experimental results are compared to the reaction-diffusion model across a range of parameters. Overall, this work highlights the importance of molecular self-assembly under nonequilibrium conditions, specifically showing that oligopeptide assembly is governed by a delicate balance between reaction kinetics and transport processes.

Percussive arc welding apparatus

DOEpatents

Hollar, Jr., Donald L.

2002-01-01

A percussive arc welding apparatus includes a generally cylindrical actuator body having front and rear end portions and defining an internal recess. The front end of the body includes an opening. A solenoid assembly is provided in the rear end portion in the internal recess of the body, and an actuator shaft assembly is provided in the front end portion in the internal recess of the actuator body. The actuator shaft assembly includes a generally cylindrical actuator block having first and second end portions, and an actuator shaft having a front end extending through the opening in the actuator body, and the rear end connected to the first end portion of the actuator block. The second end portion of the actuator block is in operational engagement with the solenoid shaft by a non-rigid connection to reduce the adverse rebound effects of the actuator shaft. A generally transversely extending pin is rigidly secured to the rear end of the shaft. One end of the pin is received in a slot in the nose housing sleeve to prevent rotation of the actuator shaft during operation of the apparatus.

Sequential programmable self-assembly: Role of cooperative interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jonathan D. Halverson; Tkachenko, Alexei V.

Here, we propose a general strategy of “sequential programmable self-assembly” that enables a bottom-up design of arbitrary multi-particle architectures on nano- and microscales. We show that a naive realization of this scheme, based on the pairwise additive interactions between particles, has fundamental limitations that lead to a relatively high error rate. This can be overcome by using cooperative interparticle binding. The cooperativity is a well known feature of many biochemical processes, responsible, e.g., for signaling and regulations in living systems. Here we propose to utilize a similar strategy for high precision self-assembly, and show that DNA-mediated interactions provide a convenientmore » platform for its implementation. In particular, we outline a specific design of a DNA-based complex which we call “DNA spider,” that acts as a smart interparticle linker and provides a built-in cooperativity of binding. We demonstrate versatility of the sequential self-assembly based on spider-functionalized particles by designing several mesostructures of increasing complexity and simulating their assembly process. This includes a number of finite and repeating structures, in particular, the so-called tetrahelix and its several derivatives. Due to its generality, this approach allows one to design and successfully self-assemble virtually any structure made of a “GEOMAG” magnetic construction toy, out of nanoparticles. According to our results, once the binding cooperativity is strong enough, the sequential self-assembly becomes essentially error-free.« less

Sequential programmable self-assembly: Role of cooperative interactions

DOE PAGES

Jonathan D. Halverson; Tkachenko, Alexei V.

2016-03-04

Here, we propose a general strategy of “sequential programmable self-assembly” that enables a bottom-up design of arbitrary multi-particle architectures on nano- and microscales. We show that a naive realization of this scheme, based on the pairwise additive interactions between particles, has fundamental limitations that lead to a relatively high error rate. This can be overcome by using cooperative interparticle binding. The cooperativity is a well known feature of many biochemical processes, responsible, e.g., for signaling and regulations in living systems. Here we propose to utilize a similar strategy for high precision self-assembly, and show that DNA-mediated interactions provide a convenientmore » platform for its implementation. In particular, we outline a specific design of a DNA-based complex which we call “DNA spider,” that acts as a smart interparticle linker and provides a built-in cooperativity of binding. We demonstrate versatility of the sequential self-assembly based on spider-functionalized particles by designing several mesostructures of increasing complexity and simulating their assembly process. This includes a number of finite and repeating structures, in particular, the so-called tetrahelix and its several derivatives. Due to its generality, this approach allows one to design and successfully self-assemble virtually any structure made of a “GEOMAG” magnetic construction toy, out of nanoparticles. According to our results, once the binding cooperativity is strong enough, the sequential self-assembly becomes essentially error-free.« less

Method and apparatus for assembling solid oxide fuel cells

DOEpatents

Szreders, Bernard E.; Campanella, Nicholas

1989-01-01

A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. The vanes, which each include a plurality of spaced slots along the facing edges thereof, may be pivotally displaced from a generally vertical orientation, wherein each jet air tube is positioned within and engaged by the aligned slots of a plurality of paired upper and lower vanes to facilitate their insertion in respective aligned SOFC tubes arranged in a matrix array, to an inclined orientation, wherein the jet air tubes may be removed from the positioning/insertion assembly after being inserted in the SOFC tubes. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing.

Coal-Powered Electric Generating Unit Efficiency and Reliability Dialogue: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Emmanuel

Coal continues to play a critical role in powering the Nation’s electricity generation, especially for baseload power plants. With aging coal generation assets facing decreased performance due to the state of the equipment, and with challenges exacerbated by the current market pressures on the coal sector, there are opportunities to advance early-stage technologies that can retrofit or replace equipment components. These changes will eventually result in significant improvements in plant performance once further developed and deployed by industry. Research and development in areas such as materials, fluid dynamics, fuel properties and preparation characteristics, and a new generation of plant controlsmore » can lead to new components and systems that can help improve the efficiency and reliability of coal-fired power plants significantly, allowing these assets to continue to provide baseload power. Coal stockpiles at electricity generation plants are typically large enough to provide 30 to 60 days of power prior to resupply—significantly enhancing the stability and reliability of the U.S. electricity sector. Falling prices for non-dispatchable renewable energy and mounting environmental regulations, among other factors, have stimulated efforts to improve the efficiency of these coal-fired electric generating units (EGUs). In addition, increased reliance on natural gas and non-dispatchable energy sources has spurred efforts to further increase the reliability of coal EGUs. The Coal Powered EGU Efficiency and Reliability Dialogue brought together stakeholders from across the coal EGU industry to discuss methods for improvement. Participants at the event reviewed performance-enhancing innovations in coal EGUs, discussed the potential for data-driven management practices to increase efficiency and reliability, investigated the impacts of regulatory compliance on coal EGU performance, and discussed upcoming challenges for the coal industry. This report documents the key findings and research suggestions discussed at the event. Discussions at the workshop will aid DOE in developing a set of distinct initiatives that can be pursued by government and industry to realize promising technological pursuits. DOE plans to use the results of the Dialogue coupled with ongoing technical analysis of efficiency opportunities within the coal-fired fleet, and additional studies to develop a comprehensive strategy for capitalizing on thermal efficiency improvements. Expected Power Plant Efficiency Improvements include developing cost-effective, efficient, and reliable technologies for boilers, turbines, and sensors and controls to improve the reliability and efficiency of existing coal-based power plants. The Office of Fossil Energy at DOE plans to work with industry to develop knowledge pertaining to advanced technologies and systems that industry can subsequently develop. These technologies and systems will increase reliability, add operational flexibility and improve efficiency, thereby providing more robust power generation infrastructure. The following table lists the research suggestions and questions for further investigation that were identified by participants in each session of the dialogue.« less

Influence of altered precipitation pattern on greenhouse gas emissions and soil enzyme activities in Pannonian soils

NASA Astrophysics Data System (ADS)

Forstner, Stefan Johannes; Michel, Kerstin; Berthold, Helene; Baumgarten, Andreas; Wanek, Wolfgang; Zechmeister-Boltenstern, Sophie; Kitzler, Barbara

2013-04-01

Precipitation patterns are likely to be altered due to climate change. Recent models predict a reduction of mean precipitation during summer accompanied by a change in short-term precipitation variability for central Europe. Correspondingly, the risk for summer drought is likely to increase. This may especially be valid for regions which already have the potential for rare, but strong precipitation events like eastern Austria. Given that these projections hold true, soils in this area will receive water irregularly in few, heavy rainfall events and be subjected to long-lasting dry periods in between. This pattern of drying/rewetting can alter soil greenhouse gas fluxes, creating a potential feedback mechanism for climate change. Microorganisms are the key players in most soil carbon (C) and nitrogen (N) transformation processes including greenhouse gas exchange. A conceptual model proposed by Schimel and colleagues (2007) links microbial stress-response physiology to ecosystem-scale biogeochemical processes: In order to cope with decreasing soil water potential, microbes modify resource allocation patterns from growth to survival. However, it remains unclear how microbial resource acquisition via extracellular enzymes and microbial-controlled greenhouse gas fluxes respond to water stress induced by soil drying/rewetting. We designed a laboratory experiment to test for effects of multiple drying/rewetting cycles on soil greenhouse gas fluxes (CO2, CH4, N2O, NO), microbial biomass and extracellular enzyme activity. Three soils representing the main soil types of eastern Austria were collected in June 2012 at the Lysimeter Research Station of the Austrian Agency for Health and Food Safety (AGES) in Vienna. Soils were sieved to 2mm, filled in steel cylinders and equilibrated for one week at 50% water holding capacity (WHC) for each soil. Then soils were separated into two groups: One group received water several times per week (C=control), the other group received water only once in two weeks (D=dry). Both groups received same water totals for each soil. At the end of each two week drying period, greenhouse gas fluxes were measured via an open-chamber-system (CO2, NO) and a closed-chamber-approach (CH4, N2O, CO2). Additional cylinders were harvested destructively to quantify inorganic N forms, microbial biomass C, N and extracellular enzyme activity (Cellulase, Xylanase, Protease, Phenoloxidase, Peroxidase). We hypothesize that after rewetting (1) rates of greenhouse gas fluxes will generally increase, as well as (2) extracellular enzyme activity indicating enhanced microbial activity. However, response may be different for gases and enzymes involved in the C and N cycle, respectively, as drying/rewetting stress may uncouple microbial mediated biogeochemical cycles. Results will be presented at the EGU General Assembly. Reference: Schimel, J., Balser, T.C., and Wallenstein, M. (2007). Microbial stress-response physiology and its implications for ecosystem function. Ecology 88, 1386-1394.

General Linker Diversification Approach to Bivalent Ligand Assembly: Generation of an Array of Ligands for the Cation-Independent Mannose 6-Phosphate Receptor.

PubMed

Fei, Xiang; Zavorka, Megan E; Malik, Guillaume; Connelly, Christopher M; MacDonald, Richard G; Berkowitz, David B

2017-08-18

A generalized strategy is presented for the rapid assembly of a set of bivalent ligands with a variety of linking functionalities from a common monomer. Herein, an array of phosphatase-inert mannose-6-phosphonate-presenting ligands for the cation-independent-mannose 6-phosphate receptor (CI-MPR) is constructed. Receptor binding affinity varies with linking functionality-the simple amide and 1,5-triazole(tetrazole) being preferred over the 1,4-triazole. This approach is expected to find application across chemical biology, particularly in glycoscience, wherein multivalency often governs molecular recognition.

Commission 53: Extra-Solar Planets

NASA Astrophysics Data System (ADS)

Boss, Alan; Lecavelier des Etangs, Alain; Mayor, Michel; Bodenheimer, Peter; Collier-Cameron, Andrew; Kokubo, Eiichiro; Mardling, Rosemary; Minniti, Dante; Queloz, Didier

2010-05-01

Commission 53 met in August 12, 2009. Outgoing President Michel Mayor chaired the meeting, and there were several dozen members present, including incoming President Alan Boss, incoming Vice President Alain Lecavelier des Etangs. Commission 53 (C53) was founded at the 2006 Prague General Assembly of the IAU. After a period of 6 years, C53 will come up for renewal at the 2012 IAU General Assembly in Beijing, China. For the moment, more than 150 IAU members have asked to be members of C53 and few dozen non-IAU members having asked to be informed of the commission activity.

RNAbrowse: RNA-Seq de novo assembly results browser.

PubMed

Mariette, Jérôme; Noirot, Céline; Nabihoudine, Ibounyamine; Bardou, Philippe; Hoede, Claire; Djari, Anis; Cabau, Cédric; Klopp, Christophe

2014-01-01

Transcriptome analysis based on a de novo assembly of next generation RNA sequences is now performed routinely in many laboratories. The generated results, including contig sequences, quantification figures, functional annotations and variation discovery outputs are usually bulky and quite diverse. This article presents a user oriented storage and visualisation environment permitting to explore the data in a top-down manner, going from general graphical views to all possible details. The software package is based on biomart, easy to install and populate with local data. The software package is available under the GNU General Public License (GPL) at http://bioinfo.genotoul.fr/RNAbrowse.

Operation and maintenance, fire rescue air-pack. Volume 2: Communications

NASA Technical Reports Server (NTRS)

1972-01-01

The operation and maintenance procedures are described for the development model of the fire rescue air pack (FRAP) voice amplifier assembly, including the battery charger. Operational instructions include a general description of the assembly, specifications, and installation and operation. Maintenance instructions include theory of operation, preventive maintenance, repair, adjustment, and a parts list. The FRAP is intended to permit fire rescue personnel to enter a smoke-filled, toxic or oxygen depleted environment carrying their own source of breathing air. The voice amplifier assembly permits the wearer to communicate by voice with other persons in the vicinity. The battery charger assembly provides a means of keeping the amplifier batteries fully charged.

Preferential assembly of heteromeric kainate and AMPA receptor amino terminal domains

PubMed Central

Lomash, Suvendu; Chittori, Sagar; Glasser, Carla

2017-01-01

Ion conductivity and the gating characteristics of tetrameric glutamate receptor ion channels are determined by their subunit composition. Competitive homo- and hetero-dimerization of their amino-terminal domains (ATDs) is a key step controlling assembly. Here we measured systematically the thermodynamic stabilities of homodimers and heterodimers of kainate and AMPA receptors using fluorescence-detected sedimentation velocity analytical ultracentrifugation. Measured affinities span many orders of magnitude, and complexes show large differences in kinetic stabilities. The association of kainate receptor ATD dimers is generally weaker than the association of AMPA receptor ATD dimers, but both show a general pattern of increased heterodimer stability as compared to the homodimers of their constituents, matching well physiologically observed receptor combinations. The free energy maps of AMPA and kainate receptor ATD dimers provide a framework for the interpretation of observed receptor subtype combinations and possible assembly pathways. PMID:29058671

Preferential assembly of heteromeric kainate and AMPA receptor amino terminal domains.

PubMed

Zhao, Huaying; Lomash, Suvendu; Chittori, Sagar; Glasser, Carla; Mayer, Mark L; Schuck, Peter

2017-10-23

Ion conductivity and the gating characteristics of tetrameric glutamate receptor ion channels are determined by their subunit composition. Competitive homo- and hetero-dimerization of their amino-terminal domains (ATDs) is a key step controlling assembly. Here we measured systematically the thermodynamic stabilities of homodimers and heterodimers of kainate and AMPA receptors using fluorescence-detected sedimentation velocity analytical ultracentrifugation. Measured affinities span many orders of magnitude, and complexes show large differences in kinetic stabilities. The association of kainate receptor ATD dimers is generally weaker than the association of AMPA receptor ATD dimers, but both show a general pattern of increased heterodimer stability as compared to the homodimers of their constituents, matching well physiologically observed receptor combinations. The free energy maps of AMPA and kainate receptor ATD dimers provide a framework for the interpretation of observed receptor subtype combinations and possible assembly pathways.

Inhibition Of Call-Cell Binding By Kipid Assemblies

DOEpatents

Nagy, Jon O. , Bargatze, Robert F.

2003-12-16

This invention relates generally to the field of therapeutic compounds designed to interfere between the binding of ligands and their receptors on cell surface. More specifically, it provides products and methods for inhibiting cell migration and activation using lipid assemblies with surface recognition elements that are specific for the receptors involved in cell migration and activation.

Computed Tomography Measuring Inside Machines

NASA Technical Reports Server (NTRS)

Wozniak, James F.; Scudder, Henry J.; Anders, Jeffrey E.

1995-01-01

Computed tomography applied to obtain approximate measurements of radial distances from centerline of turbopump to leading edges of diffuser vanes in turbopump. Use of computed tomography has significance beyond turbopump application: example of general concept of measuring internal dimensions of assembly of parts without having to perform time-consuming task of taking assembly apart and measuring internal parts on coordinate-measuring machine.

Inhibition of cell-cell binding by lipid assemblies

DOEpatents

Nagy, Jon O.; Bargatze, Robert F.

2001-05-22

This invention relates generally to the field of therapeutic compounds designed to interfere between the binding of ligands and their receptors on cell surface. More specifically, it provides products and methods for inhibiting cell migration and activation using lipid assemblies with surface recognition elements that are specific for the receptors involved in cell migration and activation.

76 FR 31354 - Notice of Issuance of Final Determination Concerning the Transit Connect Electric Vehicle

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... base without a powertrain or exhaust components, and consists of a frame, body, axles, and wheels. The... substantially transformed in the U.S. and considered products of the U.S. The U.S. assembly occurs at various stations. The assembly stations at AM General, the manufacturing subcontractor, are described as follows...

An analysis of Greek seismicity based on Non Extensive Statistical Physics: The interdependence of magnitude, interevent time and interevent distance.

NASA Astrophysics Data System (ADS)

Efstathiou, Angeliki; Tzanis, Andreas; Vallianatos, Filippos

2014-05-01

The context of Non Extensive Statistical Physics (NESP) has recently been suggested to comprise an appropriate tool for the analysis of complex dynamic systems with scale invariance, long-range interactions, long-range memory and systems that evolve in a fractal-like space-time. This is because the active tectonic grain is thought to comprise a (self-organizing) complex system; therefore, its expression (seismicity) should be manifested in the temporal and spatial statistics of energy release rates. In addition to energy release rates expressed by the magnitude M, measures of the temporal and spatial interactions are the time (Δt) and hypocentral distance (Δd) between consecutive events. Recent work indicated that if the distributions of M, Δt and Δd are independent so that the joint probability p(M,Δt,Δd) factorizes into the probabilities of M, Δt and Δd, i.e. p(M,Δt,Δd)= p(M)p(Δt)p(Δd), then the frequency of earthquake occurrence is multiply related, not only to magnitude as the celebrated Gutenberg - Richter law predicts, but also to interevent time and distance by means of well-defined power-laws consistent with NESP. The present work applies these concepts to investigate the self-organization and temporal/spatial dynamics of seismicity in Greece and western Turkey, for the period 1964-2011. The analysis was based on the ISC earthquake catalogue which is homogenous by construction with consistently determined hypocenters and magnitude. The presentation focuses on the analysis of bivariate Frequency-Magnitude-Time distributions, while using the interevent distances as spatial constraints (or spatial filters) for studying the spatial dependence of the energy and time dynamics of the seismicity. It is demonstrated that the frequency of earthquake occurrence is multiply related to the magnitude and the interevent time by means of well-defined multi-dimensional power-laws consistent with NESP and has attributes of universality,as its holds for a broad range of spatial, temporal and magnitude scales. Provided that the multivariate empirical frequency distributions are based on a sufficient number of observations as an empirical lower limit, the results are stable and consistent with the established ken, irrespective of the magnitude and spatio-temporal range of the earthquake catalogue, or operations pertaining to re-sampling, bootstrapping or re-arrangement of the catalogue. It is also demonstrated that that the expression of the regional active tectonic grain may comprise a mixture of processes significantly dependent on Δd. The analysis of the size (energy) distribution of earthquakes yielded results consistent with a correlated sub-extensive system; the results are also consistent with conventional determinations of Frequency-Magnitude distributions. The analysis of interevent times, has determined the existence of sub-extensivity and near-field interaction (correlation) in the complete catalogue of Greek and western Turkish seismicity (mixed background earthquake activity and aftershock processes),as well as in the pure background process (declustered catalogue).This could be attributed to the joint effect of near-field interaction between neighbouring earthquakes or seismic areas and interaction within aftershock sequences. The background process appears to be moderately - weakly correlated at the far field. Formal random temporal processes have not been detected. A general syllogism affordable by the above observations is that aftershock sequences may be an integral part of the seismogenetic process, as they appear to partake in long-range interaction. A formal explanation of such an effect is pending, but may nevertheless involve delayed remote triggering of seismic activity by (transient or static) stress transfer from the main shocks and large aftershocks and/or cascading effects already discussed by Marsan and Lengliné (2008). In this view, the effect weakens when aftershocks are removed because aftershocks are the link between the main shocks and their remote offshoot. Overall, the above results compare well to the results of North Californian seismicity which have shown that the expression of seismicity at Northern California is generally consistent with non-extensive (sub-extensive) thermodynamics. Acknowledgments: This work was supported by the THALES Program of the Ministry of Education of Greece and the European Union in the framework of the project "Integrated understanding of Seismicity, using innovative methodologies of Fracture Mechanics along with Earthquake and Non-Extensive Statistical Physics - Application to the geodynamic system of the Hellenic Arc - SEISMO FEAR HELLARC". References: Tzanis A., Vallianatos F., Efstathiou A., Multidimensional earthquake frequency distributions consistent with Non-Extensive Statistical Physics: the interdependence of magnitude, interevent time and interevent distance in North California. Bulletin of the Geological Society of Greece, vol. XLVII 2013. Proceedings of the 13th International Congress, Chania, Sept. 2013 Tzanis A., Vallianatos F., Efstathiou A., Generalized multidimensional earthquake frequency distributions consistent with Non-Extensive Statistical Physics: An appraisal of the universality in the interdependence of magnitude, interevent time and interevent distance Geophysical Research Abstracts, Vol. 15, EGU2013-628, 2013, EGU General Assembly 2013 Marsan, D. and Lengliné, O., 2008. Extending earthquakes's reach through cascading, Science, 319, 1076; doi: 10.1126/science.1148783 On-line Bulletin, http://www.isc.ac.uk, Internatl. Seis. Cent., Thatcham, United Kingdom, 2011.

46 CFR 56.70-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Assembly and Erection § 56.70-1 General. (a) The following generally applies to all types of welding, such as stud welding, casting repair welding and all processes of fabrication welding. Where the detailed requirements are not appropriate to a particular process, alternatives must be approved by the Marine Safety...

Integrating succession and community assembly perspectives

PubMed Central

Chang, Cynthia; HilleRisLambers, Janneke

2016-01-01

Succession and community assembly research overlap in many respects, such as through their focus on how ecological processes like dispersal, environmental filters, and biotic interactions influence community structure. Indeed, many recent advances have been made by successional studies that draw on modern analytical techniques introduced by contemporary community assembly studies. However, community assembly studies generally lack a temporal perspective, both on how the forces structuring communities might change over time and on how historical contingency (e.g. priority effects and legacy effects) and complex transitions (e.g. threshold effects) might alter community trajectories. We believe a full understanding of the complex interacting processes that shape community dynamics across large temporal scales can best be achieved by combining concepts, tools, and study systems into an integrated conceptual framework that draws upon both succession and community assembly theory. PMID:27785355

Surface mediated assembly of small, metastable gold nanoclusters

NASA Astrophysics Data System (ADS)

Pettibone, John M.; Osborn, William A.; Rykaczewski, Konrad; Talin, A. Alec; Bonevich, John E.; Hudgens, Jeffrey W.; Allendorf, Mark D.

2013-06-01

The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The films exhibit distinct structure from Au nanoparticles observed by X-ray diffraction, and film dissolution data support the preservation of small nanoclusters. UV-Vis spectroscopy, electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and electron microscopy are used to elucidate information regarding the nanocluster formation and assembly mechanism. Preferential deposition of nanocluster assemblies can be achieved on multiple substrates, including polymer, Cr, Si, SiO2, SiNx, and metal-organic frameworks (MOFs). Unlike other vapor phase coating processes, nanocluster assembly on the MIL-68(In) MOF crystal is capable of preferentially coating the external surface and stabilizing the crystal structure in hydrothermal conditions, which should enhance their storage, separation and delivery capabilities.The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The films exhibit distinct structure from Au nanoparticles observed by X-ray diffraction, and film dissolution data support the preservation of small nanoclusters. UV-Vis spectroscopy, electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and electron microscopy are used to elucidate information regarding the nanocluster formation and assembly mechanism. Preferential deposition of nanocluster assemblies can be achieved on multiple substrates, including polymer, Cr, Si, SiO2, SiNx, and metal-organic frameworks (MOFs). Unlike other vapor phase coating processes, nanocluster assembly on the MIL-68(In) MOF crystal is capable of preferentially coating the external surface and stabilizing the crystal structure in hydrothermal conditions, which should enhance their storage, separation and delivery capabilities. Electronic supplementary information (ESI) available: Further details on stored plating solution preparation, film characterization, solution processing, MOF crystal FIB reconstruction and stability are available. See DOI: 10.1039/c3nr01708g

1. GENERAL VIEW TO THE WEST OF THE EMAD FACILITY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW TO THE WEST OF THE E-MAD FACILITY AND THE SURROUNDING ENVIRONMENTAL AND TOPOGRAPHICAL SETTING. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

49 CFR 572.121 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Dummy, Beta Version § 572.121 General description. (a) The Hybrid III type 6-year-old dummy is defined... specifications package P/N 127-0000, the titles of which are listed in Table A; (2) Procedures for Assembly...

Diversity in virus assembly: biology makes things complicated

NASA Astrophysics Data System (ADS)

Zlotnick, Adam

2008-03-01

Icosahedral viruses have an elegance of geometry that implies a general path of assembly. However, structure alone provides insufficient information. Cowpea Chlorotic Mottle Virus (CCMV), an important system for studying virus assembly, consists of 90 coat protein (CP) homodimers condensed around an RNA genome. The crystal structure (Speir et al, 1995) reveals that assembly causes burial of hydrophobic surface and formation of β hexamers, the intertwining of N-termini of the CPs surrounding a quasi-sixfold. This structural view leads to reasonable and erroneous predictions: (i) CCMV capsids are extremely stable, and (ii) β hexamer formation is critical to assembly. Experimentally, we have found that capsids are based on a network of extremely weak (4-5 kT) pairwise interactions and that pentamer formation is the critical step in assembly kinetics. Because of the fragility of CP-Cp interaction, we can redirect assembly to generate and dissociate tubular nanostructures. The dynamic behavior of CCMV reflects the requirements and peculiarities of an evolved biological system; it does not necessarily reflect the behavior predicted from a more static picture of the virus.

Emulsion-Assisted Polymerization-Induced Hierarchical Self-Assembly of Giant Sea Urchin-like Aggregates in a Large Scale.

PubMed

Xu, Qingsong; Huang, Tong; Li, Shanlong; Li, Ke; Li, Chuanlong; Liu, Yannan; Wang, Yuling; Yu, Chunyang; Zhou, Yongfeng

2018-05-09

Hierarchical solution self-assembly has nowadays become an important biomimetic method to prepare highly complex and multifunctional supramolecular structures. However, despites the great progress, it is still highly challenging to prepare hierarchical self-assemblies in a large scale since the self-assembly processes are generally performed at high dilution. Herein, we report an emulsion-assisted polymerization-induced self-assembly (EAPISA) method with the advantages of in-situ self-assembly process, scalable preparation and facile functionalization to prepare hierarchical multiscale sea urchin-like aggregates (SUAs). It also extends horizons of PISA in monomers and in polymerization method. The obtained SUAs from amphiphilic alternating copolymers represent a novel self-assembled structure with micron-sized rattan ball-like capsule (RBC) acting as the hollow core body and radiating nanotubes tens of micrometers in length as the hollow spines. They can effectively capture model proteins at an ultra-low concentration (≈10 nM) after functionalized with amino groups through click copolymerization. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Review of General Algorithmic Features for Genome Assemblers for Next Generation Sequencers

PubMed Central

Wajid, Bilal; Serpedin, Erchin

2012-01-01

In the realm of bioinformatics and computational biology, the most rudimentary data upon which all the analysis is built is the sequence data of genes, proteins and RNA. The sequence data of the entire genome is the solution to the genome assembly problem. The scope of this contribution is to provide an overview on the art of problem-solving applied within the domain of genome assembly in the next-generation sequencing (NGS) platforms. This article discusses the major genome assemblers that were proposed in the literature during the past decade by outlining their basic working principles. It is intended to act as a qualitative, not a quantitative, tutorial to all working on genome assemblers pertaining to the next generation of sequencers. We discuss the theoretical aspects of various genome assemblers, identifying their working schemes. We also discuss briefly the direction in which the area is headed towards along with discussing core issues on software simplicity. PMID:22768980

Subtle balance of tropoelastin molecular shape and flexibility regulates dynamics and hierarchical assembly.

PubMed

Yeo, Giselle C; Tarakanova, Anna; Baldock, Clair; Wise, Steven G; Buehler, Markus J; Weiss, Anthony S

2016-02-01

The assembly of the tropoelastin monomer into elastin is vital for conferring elasticity on blood vessels, skin, and lungs. Tropoelastin has dual needs for flexibility and structure in self-assembly. We explore the structure-dynamics-function interplay, consider the duality of molecular order and disorder, and identify equally significant functional contributions by local and global structures. To study these organizational stratifications, we perturb a key hinge region by expressing an exon that is universally spliced out in human tropoelastins. We find a herniated nanostructure with a displaced C terminus and explain by molecular modeling that flexible helices are replaced with substantial β sheets. We see atypical higher-order cross-linking and inefficient assembly into discontinuous, thick elastic fibers. We explain this dysfunction by correlating local and global structural effects with changes in the molecule's assembly dynamics. This work has general implications for our understanding of elastomeric proteins, which balance disordered regions with defined structural modules at multiple scales for functional assembly.

RISC assembly: Coordination between small RNAs and Argonaute proteins.

PubMed

Kobayashi, Hotaka; Tomari, Yukihide

2016-01-01

Non-coding RNAs generally form ribonucleoprotein (RNP) complexes with their partner proteins to exert their functions. Small RNAs, including microRNAs, small interfering RNAs, and PIWI-interacting RNAs, assemble with Argonaute (Ago) family proteins into the effector complex called RNA-induced silencing complex (RISC), which mediates sequence-specific target gene silencing. RISC assembly is not a simple binding between a small RNA and Ago; rather, it follows an ordered multi-step pathway that requires specific accessory factors. Some steps of RISC assembly and RISC-mediated gene silencing are dependent on or facilitated by particular intracellular platforms, suggesting their spatial regulation. In this review, we summarize the currently known mechanisms for RISC assembly of each small RNA class and propose a revised model for the role of the chaperone machinery in the duplex-initiated RISC assembly pathway. This article is part of a Special Issue entitled: Clues to long noncoding RNA taxonomy1, edited by Dr. Tetsuro Hirose and Dr. Shinichi Nakagawa. Copyright © 2015 Elsevier B.V. All rights reserved.

Constrained space camera assembly

DOEpatents

Heckendorn, F.M.; Anderson, E.K.; Robinson, C.W.; Haynes, H.B.

1999-05-11

A constrained space camera assembly which is intended to be lowered through a hole into a tank, a borehole or another cavity is disclosed. The assembly includes a generally cylindrical chamber comprising a head and a body and a wiring-carrying conduit extending from the chamber. Means are included in the chamber for rotating the body about the head without breaking an airtight seal formed therebetween. The assembly may be pressurized and accompanied with a pressure sensing means for sensing if a breach has occurred in the assembly. In one embodiment, two cameras, separated from their respective lenses, are installed on a mounting apparatus disposed in the chamber. The mounting apparatus includes means allowing both longitudinal and lateral movement of the cameras. Moving the cameras longitudinally focuses the cameras, and moving the cameras laterally away from one another effectively converges the cameras so that close objects can be viewed. The assembly further includes means for moving lenses of different magnification forward of the cameras. 17 figs.

Structure of a Venezuelan equine encephalitis virus assembly intermediate isolated from infected cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamb, Kristen; Lokesh, G.L.; Sherman, Michael

2010-10-25

Venezuelan equine encephalitis virus (VEEV) is a prototypical enveloped ssRNA virus of the family Togaviridae. To better understand alphavirus assembly, we analyzed newly formed nucleocapsid particles (termed pre-viral nucleocapsids) isolated from infected cells. These particles were intermediates along the virus assembly pathway, and ultimately bind membrane-associated viral glycoproteins to bud as mature infectious virus. Purified pre-viral nucleocapsids were spherical with a unimodal diameter distribution. The structure of one class of pre-viral nucleocapsids was determined with single particle reconstruction of cryo-electron microscopy images. These studies showed that pre-viral nucleocapsids assembled into an icosahedral structure with a capsid stoichiometry similar to themore » mature nucleocapsid. However, the individual capsomers were organized significantly differently within the pre-viral and mature nucleocapsids. The pre-viral nucleocapsid structure implies that nucleocapsids are highly plastic and undergo glycoprotein and/or lipid-driven rearrangements during virus self-assembly. This mechanism of self-assembly may be general for other enveloped viruses.« less

GENERAL VIEW OF VEHICLE ACCESS PLATFORM CNORTH, HB3, FACING NORTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM C-NORTH, HB-3, FACING NORTHEAST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM ENORTH, HB3, FACING NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM E-NORTH, HB-3, FACING NORTH - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM ENORTH, HB3, FACING NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM E-NORTH, HB-3, FACING NORTHWEST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM DNORTH, HB3, FACING NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM D-NORTH, HB-3, FACING NORTHWEST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF NORTH VEHICLE ACCESS PLATFORMS, HB3, FACING NORTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF NORTH VEHICLE ACCESS PLATFORMS, HB-3, FACING NORTHEAST TOWARDS CEILING - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM BNORTH, HB3, FACING NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM B-NORTH, HB-3, FACING NORTH - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM DNORTH, HB3, FACING NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM D-NORTH, HB-3, FACING NORTH - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF NORTH VEHICLE ACCESS PLATFORMS, HB3, FACING NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF NORTH VEHICLE ACCESS PLATFORMS, HB-3, FACING NORTH TOWARDS FLOOR - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM BNORTH, HB3, FACING NORTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM B-NORTH, HB-3, FACING NORTHEAST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

GENERAL VIEW OF VEHICLE ACCESS PLATFORM CNORTH, HB3, FACING NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

GENERAL VIEW OF VEHICLE ACCESS PLATFORM C-NORTH, HB-3, FACING NORTHWEST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

51. HISTORIC GENERAL VIEW LOOKING WEST AT THE TEST STAND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. HISTORIC GENERAL VIEW LOOKING WEST AT THE TEST STAND WITH THE MERCURY REDSTONE ROCKET FULLY ASSEMBLED AND BEING PREPARED FOR TESTING. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

Application of a local linearization technique for the solution of a system of stiff differential equations associated with the simulation of a magnetic bearing assembly

NASA Technical Reports Server (NTRS)

Kibler, K. S.; Mcdaniel, G. A.

1981-01-01

A digital local linearization technique was used to solve a system of stiff differential equations which simulate a magnetic bearing assembly. The results prove the technique to be accurate, stable, and efficient when compared to a general purpose variable order Adams method with a stiff option.

The Feasibility of Publicly Funded Residential Education in Pennsylvania. Staff Analysis Pursuant to House Resolution 43 of 1995.

ERIC Educational Resources Information Center

Pennsylvania Joint State Government Commission, Harrisburg.

Pennsylvania's House Resolution 43 of 1995 directs the Joint State Government Commission to report to the General Assembly on the feasibility of creating a voluntary residential school program for disadvantaged children. The Commission assembled a Working Group to consider this issue, and the group focused on poor children living in high crime…

Automated Test Assembly Using lp_Solve Version 5.5 in R

ERIC Educational Resources Information Center

Diao, Qi; van der Linden, Wim J.

2011-01-01

This article reviews the use of the software program lp_solve version 5.5 for solving mixed-integer automated test assembly (ATA) problems. The program is freely available under Lesser General Public License 2 (LGPL2). It can be called from the statistical language R using the lpSolveAPI interface. Three empirical problems are presented to…

Self-assembly of the general membrane-remodeling protein PVAP into sevenfold virus-associated pyramids.

PubMed

Daum, Bertram; Quax, Tessa E F; Sachse, Martin; Mills, Deryck J; Reimann, Julia; Yildiz, Özkan; Häder, Sabine; Saveanu, Cosmin; Forterre, Patrick; Albers, Sonja-Verena; Kühlbrandt, Werner; Prangishvili, David

2014-03-11

Viruses have developed a wide range of strategies to escape from the host cells in which they replicate. For egress some archaeal viruses use a pyramidal structure with sevenfold rotational symmetry. Virus-associated pyramids (VAPs) assemble in the host cell membrane from the virus-encoded protein PVAP and open at the end of the infection cycle. We characterize this unusual supramolecular assembly using a combination of genetic, biochemical, and electron microscopic techniques. By whole-cell electron cryotomography, we monitored morphological changes in virus-infected host cells. Subtomogram averaging reveals the VAP structure. By heterologous expression of PVAP in cells from all three domains of life, we demonstrate that the protein integrates indiscriminately into virtually any biological membrane, where it forms sevenfold pyramids. We identify the protein domains essential for VAP formation in PVAP truncation mutants by their ability to remodel the cell membrane. Self-assembly of PVAP into pyramids requires at least two different, in-plane and out-of-plane, protein interactions. Our findings allow us to propose a model describing how PVAP arranges to form sevenfold pyramids and suggest how this small, robust protein may be used as a general membrane-remodeling system.

Representation of viruses in the remediated PDB archive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawson, Catherine L., E-mail: cathy.lawson@rutgers.edu; Dutta, Shuchismita; Westbrook, John D.

2008-08-01

A new data model for PDB entries of viruses and other biological assemblies with regular noncrystallographic symmetry is described. A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies,more » subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive.« less

Adaptor assembly for coupling turbine blades to rotor disks

DOEpatents

Delvaux, John McConnel; Garcia-Crespo, Andres Jose; Joyce, Kilmer Joseph; Tindell, Allan Randall

2014-06-03

An adaptor assembly for coupling a blade root of a turbine blade to a root slot of a rotor disk is disclosed. The adaptor assembly may generally include an adaptor body having a root configured to be received within the root slot. The adaptor body may also define a slot having an open end configured to receive the blade root. The adaptor body may further define a channel. The adaptor assembly may also include a plate having an outwardly extending foot. The foot may be configured to be received within the channel. Additionally, the plate may be configured to cover at least a portion of the open end of the slot when the foot is received within the channel.

46 CFR 56.70-20 - Qualification, general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Qualification, general. 56.70-20 Section 56.70-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-20 Qualification, general. (a) Qualification of the welding procedures to be used, and of the...

46 CFR 56.70-20 - Qualification, general.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Qualification, general. 56.70-20 Section 56.70-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-20 Qualification, general. (a) Qualification of the welding procedures to be used, and of the...

46 CFR 56.70-20 - Qualification, general.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Qualification, general. 56.70-20 Section 56.70-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-20 Qualification, general. (a) Qualification of the welding procedures to be used, and of the...

46 CFR 56.70-20 - Qualification, general.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Qualification, general. 56.70-20 Section 56.70-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-20 Qualification, general. (a) Qualification of the welding procedures to be used, and of the...

46 CFR 56.70-20 - Qualification, general.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Qualification, general. 56.70-20 Section 56.70-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Fabrication, Assembly and Erection § 56.70-20 Qualification, general. (a) Qualification of the welding procedures to be used, and of the...

75 FR 26794 - New United Motor Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and Toyota Motor Corporation... United Motor Manufacturing, Inc., formerly a joint venture of General Motors Corporation and Toyota Motor... reviewed the certification for workers of the subject firm. The workers assemble the Toyota Corolla and the...

Chapter I: Twenty Eighth General Assembly

NASA Astrophysics Data System (ADS)

Montmerle, Thierry

2015-08-01

Welcome to Beijing and IAU XXVIII General Assembly. Although the world economic situation continues to show stress, the science of astronomy is flourishing on many fronts. True, we are not immune to the negative effects of sharply reduced funding for projects and positions, yet our do-main sees increased international collaboration, pioneering facilities and techniques in development, and significant discoveries that are changing the way humanity thinks about the universe and our place in it. Programs that the IAU has undertaken such as the United Nations International Year of Astronomy 2009 and the creation of the Office of Astronomy for Development in Cape Town have been hugely successful.

RNAbrowse: RNA-Seq De Novo Assembly Results Browser

PubMed Central

Mariette, Jérôme; Noirot, Céline; Nabihoudine, Ibounyamine; Bardou, Philippe; Hoede, Claire; Djari, Anis; Cabau, Cédric; Klopp, Christophe

2014-01-01

Transcriptome analysis based on a de novo assembly of next generation RNA sequences is now performed routinely in many laboratories. The generated results, including contig sequences, quantification figures, functional annotations and variation discovery outputs are usually bulky and quite diverse. This article presents a user oriented storage and visualisation environment permitting to explore the data in a top-down manner, going from general graphical views to all possible details. The software package is based on biomart, easy to install and populate with local data. The software package is available under the GNU General Public License (GPL) at http://bioinfo.genotoul.fr/RNAbrowse. PMID:24823498

Self-Assembly of Heterogeneously Shaped Nanoparticles into Plasmonic Metamolecules on DNA Origami.

PubMed

Liu, Wenyan; Li, Ling; Yang, Shuo; Gao, Jie; Wang, Risheng

2017-10-12

Fabrication of plasmonic metamolecules (PMs) with rationally designed complexity is one of the major goals of nanotechnology. Most self-assembled PMs, however, have been constructed using single-component systems. The corresponding plasmonic assemblies still suffer from the lack of complexity, which is required to achieve a high degree of functionality. Here, we report a general applicable strategy that can realize a series of high-ordered hetero-PMs using bottom-up DNA self-assembly. DNA-functionalized differently shaped nanoparticles were deliberately arranged in prescribed positions on 3D triangular DNA origami frames to form various hetero-PMs. Importantly, we showed that the optical properties of assembled PMs could be facially tuned by selectively regulating the position of each component. This method provides a promising pathway for manufacturing more complex and advanced materials by integrating diverse nanocomponents with particular properties. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Controlling Photoconductivity in PBI Films by Supramolecular Assembly.

PubMed

Draper, Emily R; Archibald, Lewis J; Nolan, Michael C; Schweins, Ralf; Zwijnenburg, Martijn A; Sproules, Stephen; Adams, Dave J

2018-03-15

Perylene bisimides (PBIs) self-assemble in solution. The solubility of the PBIs is commonly changed through the choice of substituents at the imide positions. It is generally assumed this substitution does not affect the electronic properties of the PBI, and that the properties of the self-assembled aggregate are essentially that of the isolated molecule. However, substituents do affect the self-assembly, resulting in potentially different packing in the formed aggregates. Here, we show that the photoconductivity of films formed from a library of substituted PBIs varies strongly with the substituent and demonstrate that this is due to the different ways in which they pack. Our results open the possibility for tuning the optoelectronic properties of self-assembled PBIs by controlling the aggregate structure through careful choice of substituent, as demonstrated by us here optimising the photoconductivity of PBI films in this way. © 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Controlling Photoconductivity in PBI Films by Supramolecular Assembly

PubMed Central

Archibald, Lewis J.; Nolan, Michael C.; Schweins, Ralf; Zwijnenburg, Martijn A.; Sproules, Stephen

2018-01-01

Abstract Perylene bisimides (PBIs) self‐assemble in solution. The solubility of the PBIs is commonly changed through the choice of substituents at the imide positions. It is generally assumed this substitution does not affect the electronic properties of the PBI, and that the properties of the self‐assembled aggregate are essentially that of the isolated molecule. However, substituents do affect the self‐assembly, resulting in potentially different packing in the formed aggregates. Here, we show that the photoconductivity of films formed from a library of substituted PBIs varies strongly with the substituent and demonstrate that this is due to the different ways in which they pack. Our results open the possibility for tuning the optoelectronic properties of self‐assembled PBIs by controlling the aggregate structure through careful choice of substituent, as demonstrated by us here optimising the photoconductivity of PBI films in this way. PMID:29405458

Free-standing supramolecular hydrogel objects by reaction-diffusion

PubMed Central

Lovrak, Matija; Hendriksen, Wouter E. J.; Maity, Chandan; Mytnyk, Serhii; van Steijn, Volkert; Eelkema, Rienk; van Esch, Jan H.

2017-01-01

Self-assembly provides access to a variety of molecular materials, yet spatial control over structure formation remains difficult to achieve. Here we show how reaction–diffusion (RD) can be coupled to a molecular self-assembly process to generate macroscopic free-standing objects with control over shape, size, and functionality. In RD, two or more reactants diffuse from different positions to give rise to spatially defined structures on reaction. We demonstrate that RD can be used to locally control formation and self-assembly of hydrazone molecular gelators from their non-assembling precursors, leading to soft, free-standing hydrogel objects with sizes ranging from several hundred micrometres up to centimeters. Different chemical functionalities and gradients can easily be integrated in the hydrogel objects by using different reactants. Our methodology, together with the vast range of organic reactions and self-assembling building blocks, provides a general approach towards the programmed fabrication of soft microscale objects with controlled functionality and shape. PMID:28580948

Numerical Generation of Dense Plume Fingers in Unsaturated Homogeneous Porous Media

NASA Astrophysics Data System (ADS)

Cremer, C.; Graf, T.

2012-04-01

In nature, the migration of dense plumes typically results in the formation of vertical plume fingers. Flow direction in fingers is downwards, which is counterbalanced by upwards flow of less dense fluid between fingers. In heterogeneous media, heterogeneity itself is known to trigger the formation of fingers. In homogeneous media, however, fingers are also created even if all grains had the same diameter. The reason is that pore-scale heterogeneity leading to different flow velocities also exists in homogeneous media due to two effects: (i) Grains of identical size may randomly arrange differently, e.g. forming tetrahedrons, hexahedrons or octahedrons. Each arrangement creates pores of varying diameter, thus resulting in different average flow velocities. (ii) Random variations of solute concentration lead to varying buoyancy effects, thus also resulting in different velocities. As a continuation of previously made efforts to incorporate pore-scale heterogeneity into fully saturated soil such that dense fingers are realistically generated (Cremer and Graf, EGU Assembly, 2011), the current paper extends the research scope from saturated to unsaturated soil. Perturbation methods are evaluated by numerically re-simulating a laboratory-scale experiment of plume transport in homogeneous unsaturated sand (Simmons et al., Transp. Porous Media, 2002). The following 5 methods are being discussed: (i) homogeneous sand, (ii) initial perturbation of solute concentration, (iii) spatially random, time-constant perturbation of solute source, (iv) spatially and temporally random noise of simulated solute concentration, and (v) random K-field that introduces physically insignificant but numerically significant heterogeneity. Results demonstrate that, as opposed to saturated flow, perturbing the solute source will not result in plume fingering. This is because the location of the perturbed source (domain top) and the location of finger generation (groundwater surface) do not coincide. Alternatively, similar to saturated flow, applying either a random concentration noise (iv) or a random K-field (v) generates realistic plume fingering. Future work will focus on the generation mechanisms of plume finger splitting.