Science.gov

Sample records for einsteinium compounds

  1. Einsteinium

    NASA Astrophysics Data System (ADS)

    Haire, Richard G.

    The discovery of einsteinium, element 99, came about during the analyses of nuclear products produced in and then recovered from test debris following a thermonuclear explosion (weapon test device, ‘Mike', November 1952) at Eniwetok Atoll in the Pacific Ocean. The uranium present in this device was subjected to a very intense neutron flux (integrated fluence of about 1024neutrons) in an extremely short time frame (few nanoseconds), which allowed a large number of multiple neutron captures with a minimal degree of decay of the products formed. Nuclei were formed with usually high neutron/proton ratios (very ‘heavy' uranium isotopes), which then rapidly beta-decayed into new, transuranium isotopes through element 100. Scientists from several U.S. Government laboratories separated and analyzed extensively the debris samplings in the following weeks. From these investigations came the discovery and identification of einsteinium and fermium. The first element was named in honor of Albert Einstein, and assigned the symbol, E (later changed to the current symbol, Es). Additional details and discussions about the discovery of this element and the scientists involved are given in several references (Thompson et al., 1954; Ghiorso et al., 1955; Fields et al., 1956; Hyde et al., 1964; Seaborg and Loveland, 1990).

  2. Ion-exchange chromatographic separation of einsteinium from irradiated californium targets

    SciTech Connect

    Elesin, A.A.; Nikolaev, V.M.; Shalimov, V.V.; Popov, Yu.S.; Kovantsev, V.N.; Tselishchev, I.V.; Filimonov, V.T.; Mishenev, V.B.; Yadovin, A.A.; Golosovskii, L.S.; Chetverikov, A.P.

    1987-07-01

    Einsteinium was obtained by preparing two experimental californium targets and subjecting them to neutron irradiation in a high-flux reactor. The einsteinium was separated from the bombarded targets on a column packed with KU-2U sulfonated cation-exchange resin (20-50 ..mu..m) and eluted at room temperature with an ammonium ..cap alpha..-hydroxyisobutyrate solution. Three successive separation cycles removed californium to produce einsteinium in 68% yield with a decontamination factor of 5.3 x 10/sup 6/. About 20% of the einsteinium was used up by analysis and 11% remained in intermediate fractions. The method developed yielded pure einsteinium with little fission products present. The contribution of the fission products to the total einsteinium gamma-irradiation dose rate was no greater than 81%, due primarily to the radioisotope terbium-160.

  3. Chemical Properties of Elements 99 and 100 [Einsteinium and Fermium

    DOE R&D Accomplishments Database

    Seaborg, G. T.; Thompson, S. G.; Harvey, B. G.; Choppin, G. R.

    1954-07-23

    A description of some of the chemical properties and of the methods used in the separations of elements 99 [Einsteinium] and 100 [Fermium] are given. The new elements exhibit the properties expected for the tenth and eleventh actinide elements. Attempts to produce an oxidation state greater than III of element 99 have been unsuccessful. In normal aqueous media only the III state of element 100 appears to exist. The relative spacings of the elution peaks of the new elements in some separations with ion exchange resin columns are the same as the relative spacings of the homologous lanthanide elements. The results of experiments involving cation exchange resins with very concentrated hydrochloric acid eluant show that the new elements, like the earlier actinides, are more strongly complexed than the lanthanides. The new elements also exist partially as anions in concentrated hydrochloric acid, as do earlier actinide elements, and they may be partially separated from each other by means of ion exchange resins. With some eluants interesting reversals of elution positions are observed in the region Bk-Cf-99-100, indicating complex ion formation involving unusual factors.

  4. Hyperfine field of einsteinium in iron and nuclear magnetic moment of {sup 254}Es

    SciTech Connect

    Severijns, N.; Kraev, I. S.; Phalet, T.; Tandecki, M.; Traykov, E.; Gorp, S. Van; Wauters, F.; Belyaev, A. A.; Lukhanin, A. A.; Noga, V. I.; Erzinkyan, A. L.; Parfenova, V. P.; Eversheim, P.-D.; Herzog, P.; Tramm, C.; Filimonov, V. T.; Toporov, Yu. G.; Zotov, E.; Golovko, V. V.; Gurevich, G. M.

    2009-06-15

    The angular distributions of {gamma} rays and {alpha} particles from oriented {sup 250}Bk, {sup 253,254}Es, and {sup 255}Fm nuclei were investigated to extract hyperfine interaction information for these actinide impurities in an iron host lattice. The hyperfine field of einsteinium in iron was found to be |B{sub hf}(EsFe{sub lowbar|})=396(32) T. With this value the magnetic moment of {sup 254}Es was then determined as |{mu}|=4.35(41) {mu}{sub N}.

  5. Electron-capture delayed fission properties of neutron-deficient einsteinium nuclei

    SciTech Connect

    Shaughnessy, Dawn A.

    2000-01-01

    Electron-capture delayed fission (ECDF) properties of neutron-deficient einsteinium isotopes were investigated using a combination of chemical separations and on-line radiation detection methods. 242Es was produced via the 233U(14N,5n)242Es reaction at a beam energy of 87 MeV (on target) in the lab system, and was found to decay with a half-life of 11 ± 3 seconds. The ECDF of 242Es showed a highly asymmetric mass distribution with an average pre-neutron emission total kinetic energy (TKE) of 183 ± 18 MeV. The probability of delayed fission (PDF) was measured to be 0.006 ± 0.002. In conjunction with this experiment, the excitation functions of the 233U(14N,xn)247-xEs and 233U(15N,xn)248-xEs reactions were measured for 243Es, 244Es and 245Es at projectile energies between 80 MeV and 100 MeV.

  6. Compound

    NASA Astrophysics Data System (ADS)

    Suzumura, Akitoshi; Watanabe, Masaki; Nagasako, Naoyuki; Asahi, Ryoji

    2014-06-01

    Recently, Cu-based chalcogenides such as Cu3SbSe4, Cu2Se, and Cu2SnSe3 have attracted much attention because of their high thermoelectric performance and their common feature of very low thermal conductivity. However, for practical use, materials without toxic elements such as selenium are preferable. In this paper, we report Se-free Cu3SbS4 thermoelectric material and improvement of its figure of merit ( ZT) by chemical substitutions. Substitutions of 3 at.% Ag for Cu and 2 at.% Ge for Sb lead to significant reductions in the thermal conductivity by 37% and 22%, respectively. These substitutions do not sacrifice the power factor, thus resulting in enhancement of the ZT value. The sensitivity of the thermal conductivity to chemical substitutions in these compounds is discussed in terms of the calculated phonon dispersion and previously proposed models for Cu-based chalcogenides. To improve the power factor, we optimize the hole carrier concentration by substitution of Ge for Sb, achieving a power factor of 16 μW/cm K2 at 573 K, which is better than the best reported for Se-based Cu3SbSe4 compounds.

  7. TRIFLUOROMETHYL COMPOUNDS OF GERMANIUM

    DTIC Science & Technology

    FLUORIDES, *GERMANIUM COMPOUNDS, *HALIDES, *ORGANOMETALLIC COMPOUNDS, ALKYL RADICALS, ARSENIC COMPOUNDS, CHEMICAL BONDS, CHEMICAL REACTIONS ...CHLORIDES, CHLORINE COMPOUNDS, HYDROLYSIS, IODIDES, METHYL RADICALS, POTASSIUM COMPOUNDS, PYROLYSIS, STABILITY, SYNTHESIS, TIN COMPOUNDS.

  8. Polybenzimidazole compounds

    DOEpatents

    Klaehn, John R.; Peterson, Eric S.; Wertsching, Alan K.; Orme, Christopher J.; Luther, Thomas A.; Jones, Michael G.

    2010-08-10

    A PBI compound that includes imidazole nitrogens, at least a portion of which are substituted with an organic-inorganic hybrid moiety. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2--, where R is selected from among methyl, phenyl, vinyl, and allyl. The PBI compound may exhibit similar thermal properties in comparison to the unsubstituted PBI. The PBI compound may exhibit a solubility in an organic solvent greater than the solubility of the unsubstituted PBI. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may occur at about room temperature and/or at about atmospheric pressure. Substituting may use at least five equivalents in relation to the imidazole nitrogens to be substituted or, preferably, about fifteen equivalents.

  9. Polybenzimidazole compounds

    SciTech Connect

    Klaehn, John R; Peterson, Eric S; Orme, Christopher J; Jones, Michael G; Wertsching, Alan K; Luther, Thomas A; Trowbridge, Tammy L

    2011-11-22

    A PBI compound includes imidazole nitrogens at least a portion of which are substituted with a moiety containing a carbonyl group, the substituted imidazole nitrogens being bonded to carbon of the carbonyl group. At least 85% of the nitrogens may be substituted. The carbonyl-containing moiety may include RCO--, where R is alkoxy or haloalkyl. The PBI compound may exhibit a first temperature marking an onset of weight loss corresponding to reversion of the substituted PBI that is less than a second temperature marking an onset of decomposition of an otherwise identical PBI compound without the substituted moiety. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may use more than 5 equivalents in relation to the imidazole nitrogens to be substituted.

  10. Multipurpose Compound

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Specially formulated derivatives of an unusual basic compound known as Alcide may be the answer to effective treatment and prevention of the disease bovine mastitis, a bacterial inflammation of a cow's mammary gland that results in loss of milk production and in extreme cases, death. Manufactured by Alcide Corporation the Alcide compound has killed all tested bacteria, virus and fungi, shortly after contact, with minimal toxic effects on humans or animals. Alcide Corporation credits the existence of the mastitis treatment/prevention products to assistance provided the company by NERAC, Inc.

  11. Perfluorinated Compounds

    EPA Science Inventory

    Perfluorinated compounds such as the perfluoroalkyl acids (PFAAs) and their derivatives are important man-made chemicals that have wide consumer and industrial applications. They are relatively contemporary chemicals, being in use only since the 1950s, and until recently, have be...

  12. Perfluorinated Compounds

    EPA Science Inventory

    Perfluorinated compounds such as the perfluoroalkyl acids (PFAAs) and their derivatives are important man-made chemicals that have wide consumer and industrial applications. They are relatively contemporary chemicals, being in use only since the 1950s, and until recently, have be...

  13. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2003-01-01

    Seawater and natural brines accounted for about 60 percent of U.S. magnesium compounds production during 2002. Dead-burned and caustic-calcined magnesias were recovered from seawater by Premier Chemicals in Florida. They were also recovered from well brines in Michigan by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And they were recovered from magnesite in Nevada by Premier Chemicals.

  14. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2006-01-01

    In 2005, seawater and natural brines accounted for 51% of US magnesium compounds production. World magnesia production was estimated to be 14.5 Mt. Most of the production came from China, North Korea, Russia and Turkey. Although no specific production figures are available, Japan and the United States are estimated to account for almost one-half of the world's capacity from seawater and brines.

  15. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2011-01-01

    Seawater and natural brines accounted for about 54 percent of U.S. magnesium compounds production in 2010. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash-Wendover and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its operation mentioned above.

  16. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2010-01-01

    Seawater and natural brines accounted for about 40 percent of U.S. magnesium compounds production in 2009. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Chemicals in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover, and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta from its operation mentioned above.

  17. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2002-01-01

    Seawater and natural brines accounted for about 60% of US magnesium compounds production in 2001. Dead-burned and caustic-calcined magnesias were recovered from seawater in Florida by Premier Chemicals. They were also recovered from Michigan well brines by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And Premier Chemicals recovered dead-burned and caustic-calcined magnesias from magnesite in Nevada. Reilly Industries and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah.

  18. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2007-01-01

    Seawater and natural brines accounted for about 52 percent of U.S. magnesium compounds production in 2006. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from sea-water by Premier Chemicals in Florida; from well brines in Michigan by Martin Marietta and Rohm and Haas; and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from brucite by Applied Chemical Magnesias in Texas, from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta and Rohm and Haas from their operations mentioned above. About 59 percent of the magnesium compounds consumed in the United States was used for refractories that are used mainly to line steelmaking furnaces. The remaining 41 percent was consumed in agricultural, chemical, construction, environmental and industrial applications.

  19. Intermetallic Compounds

    NASA Astrophysics Data System (ADS)

    Takagiwa, Y.; Matsuura, Y.; Kimura, K.

    2014-06-01

    We have focused on the binary narrow-bandgap intermetallic compounds FeGa3 and RuGa3 as thermoelectric materials. Their crystal structure is FeGa3-type (tetragonal, P42/ mnm) with 16 atoms per unit cell. Despite their simple crystal structure, their room temperature thermal conductivity is in the range 4-5-W-m-1-K-1. Both compounds have narrow-bandgaps of approximately 0.3-eV near the Fermi level. Because their Seebeck coefficients are quite large negative values in the range 350-<-| S 373K|-<-550- μV-K-1 for undoped samples, it should be possible to obtain highly efficient thermoelectric materials both by adjusting the carrier concentration and by reducing the thermal conductivity. Here, we report the effects of doping on the thermoelectric properties of FeGa3 and RuGa3 as n and p-type materials. The dimensionless figure of merit, ZT, was significantly improved by substitution of Sn for Ga in FeGa3 (electron-doping) and by substitution of Zn for Ga in RuGa3 (hole-doping), mainly as a result of optimization of the electronic part, S 2 σ.

  20. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2012-01-01

    Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash Wendover LLC and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma Inc. in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its brine operation in Michigan.

  1. Bismaleimide compounds

    DOEpatents

    Adams, J.E.; Jamieson, D.R.

    1986-01-14

    Bismaleimides of the formula shown in the diagram wherein R[sub 1] and R[sub 2] each independently is H, C[sub 1-4]-alkyl, C[sub 1-4]-alkoxy, Cl or Br, or R[sub 1] and R[sub 2] together form a fused 6-membered hydrocarbon aromatic ring, with the proviso that R[sub 1] and R[sub 2] are not t-butyl or t-butoxy; X is O, S or Se; n is 1--3; and the alkylene bridging group, optionally, is substituted by 1--3 methyl groups or by fluorine, form polybismaleimide resins which have valuable physical properties. Uniquely, these compounds permit extended cure times, i.e., they remain fluid for a time sufficient to permit the formation of a homogeneous melt prior to curing.

  2. Bismaleimide compounds

    DOEpatents

    Adams, Johnnie E.; Jamieson, Donald R.

    1986-01-14

    Bismaleimides of the formula ##STR1## wherein R.sub.1 and R.sub.2 each independently is H, C.sub.1-4 -alkyl, C.sub.1-4 -alkoxy, C1 or Br, or R.sub.1 and R.sub.2 together form a fused 6-membered hydrocarbon aromatic ring, with the proviso that R.sub.1 and R.sub.2 are not t-butyl or t-butoxy; X is O, S or Se; n is 1-3; and the alkylene bridging group, optionally, is substituted by 1-3 methyl groups or by fluorine, form polybismaleimide resins which have valuable physical properties. Uniquely, these compounds permit extended cure times, i.e., they remain fluid for a time sufficient to permit the formation of a homogeneous melt prior to curing.

  3. Compounds affecting cholesterol absorption

    NASA Technical Reports Server (NTRS)

    Hua, Duy H. (Inventor); Koo, Sung I. (Inventor); Noh, Sang K. (Inventor)

    2004-01-01

    A class of novel compounds is described for use in affecting lymphatic absorption of cholesterol. Compounds of particular interest are defined by Formula I: ##STR1## or a pharmaceutically acceptable salt thereof.

  4. Dinitroso and polynitroso compounds

    PubMed Central

    Gowenlock, Brian G.; Richter-Addo, George B.

    2005-01-01

    The growing interest in the chemistry of C-nitroso compounds (RN=O; R = alkyl or aryl group) is due in part to the recognition of their participation in various metabolic processes of nitrogen-containing compounds. C-Nitroso compounds have a rich organic chemistry in their own right, displaying interesting intra- and intermolecular dimerization processes and addition reactions with unsaturated compounds. In addition, they have a fascinating coordination chemistry. While most of the attention has been directed towards C-nitroso compounds containing a single –NO moiety, there is an emerging area of research dealing with dinitroso and polynitroso compounds. In this critical review, we present and discuss the synthetic routes and properties of these relatively unexplored dinitroso and polynitroso compounds, and suggest areas of further development involving these compounds. (126 references.) PMID:16100619

  5. Techniques of microchemistry and their applications to some transcurium elements at Berkeley and Oak Ridge. [Micro- to milligram scale

    SciTech Connect

    Peterson, J.R.

    1980-01-01

    This paper gives an account of the microchemical methods that were developed for preparing and studying submilligram amounts of berkelium-249, californium-249, and einsteinium-253 and their compounds. The studies involved absorption spectrophotometry primarily, and also x-ray and electron diffraction. (DLC)

  6. XAFS Model Compound Library

    DOE Data Explorer

    Newville, Matthew

    The XAFS Model Compound Library contains XAFS data on model compounds. The term "model" compounds refers to compounds of homogeneous and well-known crystallographic or molecular structure. Each data file in this library has an associated atoms.inp file that can be converted to a feff.inp file using the program ATOMS. (See the related Searchable Atoms.inp Archive at http://cars9.uchicago.edu/~newville/adb/) This Library exists because XAFS data on model compounds is useful for several reasons, including comparing to unknown data for "fingerprinting" and testing calculations and analysis methods. The collection here is currently limited, but is growing. The focus to date has been on inorganic compounds and minerals of interest to the geochemical community. [Copied, with editing, from http://cars9.uchicago.edu/~newville/ModelLib/

  7. Preparation of uranium compounds

    DOEpatents

    Kiplinger, Jaqueline L; Montreal, Marisa J; Thomson, Robert K; Cantat, Thibault; Travia, Nicholas E

    2013-02-19

    UI.sub.3(1,4-dioxane).sub.1.5 and UI.sub.4(1,4-dioxane).sub.2, were synthesized in high yield by reacting turnings of elemental uranium with iodine dissolved in 1,4-dioxane under mild conditions. These molecular compounds of uranium are thermally stable and excellent precursor materials for synthesizing other molecular compounds of uranium including alkoxide, amide, organometallic, and halide compounds.

  8. Nitrodifluoraminoterphenyl compounds and processes

    DOEpatents

    Lerom, M.W.; Peters, H.M.

    1975-07-08

    This patent relates to the nitrodifluoraminoterphenyl compounds: 3,3''-bis (difluoramino)-2,2'' 4,4', 4'',6,6',6''-octanitro-m-terphenyl (DDONT) and 3,3''-bis(difluoramino)-2,2',2''4,4',4'',6,6',6''-nonanitro-m-terphenyl (DDNONA). Procedures are described wherein diamino precursors of the indicated compounds are prepared and the final compounds are obtained by a fluorination operation. The compounds are highly energetic and suitable for use as explosives and particularly in exploding bridge wire (EBW) detonators. (auth)

  9. [Laboratory of Biopolymer Compounds].

    PubMed

    Ostapchuk, A M

    2008-01-01

    General information is presented concerning the Laboratory of Biological Polymeric Compounds at the Institute of Microbiology and Virology of the National Academy of Sciences of Ukraine; equipment, analytical and biophysical methods applied in the laboratory are listed.

  10. Heart testing compound

    DOEpatents

    Knapp, F.F. Jr.; Goodman, M.M.

    1983-06-29

    The compound 15-(p-(/sup 125/I)-iodophenyl)-6-tellurapentadecanoic acid is disclosed as a myocardial imaging agent having rapid and pronounced uptake, prolonged myocardial retention, and low in vivo deiodination.

  11. Polynitramino compounds outperform PETN.

    PubMed

    Joo, Young-Hyuk; Shreeve, Jean'ne M

    2010-01-07

    New polynitramino compounds were synthesized and fully characterized using IR and multinuclear ((1)H, (13)C, (15)N) NMR spectroscopy, and elemental analysis as well as single-crystal X-ray diffraction.

  12. Stabilized Lanthanum Sulphur Compounds

    NASA Technical Reports Server (NTRS)

    Reynolds, George H. (Inventor); Elsner, Norbert B. (Inventor); Shearer, Clyde H. (Inventor)

    1985-01-01

    Lanthanum sulfide is maintained in the stable cubic phase form over a temperature range of from 500 C to 1500 C by adding to it small amounts of calcium, barium. or strontium. This novel compound is an excellent thermoelectric material.

  13. Heart testing compound

    DOEpatents

    Knapp, Jr., Furn F.; Goodman, Mark M.

    1985-01-01

    The compound 15-(p-[.sup.125 I]-iodophenyl)-6-tellurapentadecanoic acid is disclosed as a myocardial imaging agent having rapid and pronounced uptake, prolonged myocardial retention, and low in vivo deiodination.

  14. Chemistry of peroxide compounds

    NASA Technical Reports Server (NTRS)

    Volnov, I. I.

    1981-01-01

    The history of Soviet research from 1866 to 1967 on peroxide compounds is reviewed. This research dealt mainly with peroxide kinetics, reactivity and characteristics, peroxide production processes, and more recently with superoxides and ozonides and emphasis on the higher oxides of group 1 and 2 elements. Solid state fluidized bed synthesis and production of high purity products based on the relative solubilities of the initial, intermediate, and final compounds and elements in liquid ammonia are discussed.

  15. Compound composite odontoma

    PubMed Central

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas. PMID:27194882

  16. Compound composite odontoma.

    PubMed

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas.

  17. Thermodynamics of Organic Compounds

    DTIC Science & Technology

    1979-01-01

    General Techniques for Combustion of Liquid/Soli. Organic Compounds by Oxygen Bomb Calorimetry by Arthur J. Head, William D. Good, and Ccrnelius...Mosselman, Chap. 8; Combustion of Liquid/Solid Organic Compounds with Non-Metallic Hetero-Atoms by Arthur J. Head and William D. Good, Chap. 9; in...0 Box 95085 Washington, DC 20234 Los Angeles, CA 90045 National Bureau of Standards CINDAS Chemical Thermodynamics Division Purdue University

  18. Phenolic Molding Compounds

    NASA Astrophysics Data System (ADS)

    Koizumi, Koji; Charles, Ted; de Keyser, Hendrik

    Phenolic Molding Compounds continue to exhibit well balanced properties such as heat resistance, chemical resistance, dimensional stability, and creep resistance. They are widely applied in electrical, appliance, small engine, commutator, and automotive applications. As the focus of the automotive industry is weight reduction for greater fuel efficiency, phenolic molding compounds become appealing alternatives to metals. Current market volumes and trends, formulation components and its impact on properties, and a review of common manufacturing methods are presented. Molding processes as well as unique advanced techniques such as high temperature molding, live sprue, and injection/compression technique provide additional benefits in improving the performance characterisitics of phenolic molding compounds. Of special interest are descriptions of some of the latest innovations in automotive components, such as the phenolic intake manifold and valve block for dual clutch transmissions. The chapter also characterizes the most recent developments in new materials, including long glass phenolic molding compounds and carbon fiber reinforced phenolic molding compounds exhibiting a 10-20-fold increase in Charpy impact strength when compared to short fiber filled materials. The role of fatigue testing and fatigue fracture behavior presents some insight into long-term reliability and durability of glass-filled phenolic molding compounds. A section on new technology outlines the important factors to consider in modeling phenolic parts by finite element analysis and flow simulation.

  19. Biodegradation of nitroaromatic compounds.

    PubMed

    Spain, J C

    1995-01-01

    Nitroaromatic compounds are released into the biosphere almost exclusively from anthropogenic sources. Some compounds are produced by incomplete combustion of fossil fuels; others are used as synthetic intermediates, dyes, pesticides, and explosives. Recent research revealed a number of microbial systems capable of transforming or biodegrading nitroaromatic compounds. Anaerobic bacteria can reduce the nitro group via nitroso and hydroxylamino intermediates to the corresponding amines. Isolates of Desulfovibrio spp. can use nitroaromatic compounds as their source of nitrogen. They can also reduce 2,4,6-trinitrotoluene to 2,4,6-triaminotoluene. Several strains of Clostridium can catalyze a similar reduction and also seem to be able to degrade the molecule to small aliphatic acids. Anaerobic systems have been demonstrated to destroy munitions and pesticides in soil. Fungi can extensively degrade or mineralize a variety of nitroaromatic compounds. For example, Phanerochaete chrysosporium mineralizes 2,4-dinitrotoluene and 2,4,6-trinitrotoluene and shows promise as the basis for bioremediation strategies. The anaerobic bacteria and the fungi mentioned above mostly transform nitroaromatic compounds via fortuitous reactions. In contrast, a number of nitroaromatic compounds can serve as growth substrates for aerobic bacteria. Removal or productive metabolism of nitro groups can be accomplished by four different strategies. (a) Some bacteria can reduce the aromatic ring of dinitro and trinitro compounds by the addition of a hydride ion to form a hydride-Meisenheimer complex, which subsequently rearomatizes with the elimination of nitrite. (b) Monooxygenase enzymes can add a single oxygen atom and eliminate the nitro group from nitrophenols. (c) Dioxygenase enzymes can insert two hydroxyl groups into the aromatic ring and precipitate the spontaneous elimination of the nitro group from a variety of nitroaromatic compounds. (d) Reduction of the nitro group to the corresponding

  20. Nonpost mold cure compound

    NASA Astrophysics Data System (ADS)

    Hirata, Akihiro

    1997-08-01

    The recent low price trend of electronic products has made IC manufacturing efficiency a top priority in the semiconductor industry. Post mold cure (PMC) process, which generally involves heating the packages in the oven at 175 C for 4 to 8 hours, takes up much longer time than most other assembly processes. If this PMC process can be reduced or eliminated, semiconductor makers will be rewarded with a much higher cost merit. We define the purpose of Non-PMC as 'to get high reliability with suitable physical and electrical properties without PMC'. We compared carious properties of molding compound before and after PMC. We found that curing reaction has almost complete through DSC and C-NMR measurement, but several properties have not stabilized yet, and that not all properties after PMC were better than before PMC. We developed new grade of molding compound considering these facts. And we found that main factors to accomplish non-PMC compound are curability and flowability, and more, increasing of fundamental properties. To accomplish non-PMC, at first, molding compound need to have very high curability. Generally speaking, too high curability causes low flowability, and causes incomplete filing, wire sweep, pad shift, and weak adhesion to inner parts of IC packages. To prevent these failures, various compound properties were studied, and we achieved in adding good flowability to very high curable molding compound. Finally, anti-popcorn property was improved by adding low moisture, high adhesion, high Tg, and high flexural strengths at high temperature. Through this study, we developed new compound grade for various package, especially large QFP using standard ECN resin.

  1. STATISTICAL DATA ON CHEMICAL COMPOUNDS.

    DTIC Science & Technology

    DATA STORAGE SYSTEMS, FEASIBILITY STUDIES, COMPUTERS, STATISTICAL DATA , DOCUMENTS, ARMY...CHEMICAL COMPOUNDS, INFORMATION RETRIEVAL), (*INFORMATION RETRIEVAL, CHEMICAL COMPOUNDS), MOLECULAR STRUCTURE, BIBLIOGRAPHIES, DATA PROCESSING

  2. Compound management beyond efficiency.

    PubMed

    Burr, Ian; Winchester, Toby; Keighley, Wilma; Sewing, Andreas

    2009-06-01

    Codeveloping alongside chemistry and in vitro screening, compound management was one of the first areas in research recognizing the need for efficient processes and workflows. Material management groups have centralized, automated, miniaturized and, importantly, found out what not to do with compounds. While driving down cost and improving quality in storage and processing, researchers still face the challenge of interfacing optimally with changing business processes, in screening groups, and with external vendors and focusing on biologicals in many companies. Here we review our strategy to provide a seamless link between compound acquisition and screening operations and the impact of material management on quality of the downstream processes. Although this is driven in part by new technologies and improved quality control within material management, redefining team structures and roles also drives job satisfaction and motivation in our teams with a subsequent positive impact on cycle times and customer feedback.

  3. Organic compounds in meteorites

    NASA Technical Reports Server (NTRS)

    Anders, E.; Hayatsu, R.; Studier, M. H.

    1973-01-01

    The problem of whether organic compounds originated in meteorites as a primary condensate from a solar gas or whether they were introduced as a secondary product into the meteorite during its residence in a parent body is examined by initially attempting to reconstruct the physical conditions during condensation (temperature, pressure, time) from clues in the inorganic matrix of the meteorite. The condensation behavior of carbon under these conditions is then analyzed on the basis of thermodynamic calculations, and compounds synthesized in model experiments on the condensation of carbon are compared with those actually found in meteorites. Organic compounds in meteorites seem to have formed by catalytic reactions of carbon monoxide, hydrogen, and ammonia in the solar nebula at 360 to 400 K temperature and about 3 to 7.6 microtorr pressure. The onset of these reactions was triggered by the formation of suitable catalysts (magnetite, hydrated silicates) at these temperatures.

  4. Metalloid compounds as drugs

    PubMed Central

    Sekhon, B. S.

    2013-01-01

    The six elements commonly known as metalloids are boron, silicon, germanium, arsenic, antimony, and tellurium. Metalloid containing compounds have been used as antiprotozoal drugs. Boron-based drugs, the benzoxaboroles have been exploited as potential treatments for neglected tropical diseases. Arsenic has been used as a medicinal agent and arsphenamine was the main drug used to treat syphilis. Arsenic trioxide has been approved for the treatment of acute promyelocytic leukemia. Pentavalent antimonials have been the recommended drug for visceral leishmaniasis and cutaneous leishmaniasis. Tellurium (IV) compounds may have important roles in thiol redox biological activity in the human body, and ammonium trichloro (dioxoethylene-O, O’-)tellurate (AS101) may be a promising agent for the treatment of Parkinson’s disease. Organosilicon compounds have been shown to be effective in vitro multidrug-resistance reverting agents. PMID:24019824

  5. Sulfur compounds in coal

    NASA Technical Reports Server (NTRS)

    Attar, A.; Corcoran, W. H.

    1977-01-01

    The literature on the chemical structure of the organic sulfur compounds (or functional groups) in coal is reviewed. Four methods were applied in the literature to study the sulfur compounds in coal: direct spectrometric and chemical analysis, depolymerization in drastic conditions, depolymerization in mild conditions, and studies on simulated coal. The data suggest that most of the organic sulfur in coal is in the form of thiophenic structures and aromatic and aliphatic sulfides. The relative abundance of the sulfur groups in bituminous coal is estimated as 50:30:20%, respectively. The ratio changes during processing and during the chemical analysis. The main effects are the transformation during processing of sulfides to the more stable thiophenic compounds and the elimination of hydrogen sulfide.

  6. [Energies of organic compounds

    SciTech Connect

    1995-07-01

    The first part of our study of the enthalpy of reduction of carbonyl compounds has been completed and includes four aldehydes, acetone, a series of cyclic ketones and ethyl acetate. Results suggest that some of the literature data for these compounds are significantly in error. Equilibrium constants have been measured for the reaction of carbonyl compounds with water to give hydrates as well as with methanol to give either hemiacetals or acetals. They cover a wide range, and studies are underway to determine the reasons for the differences. Studies of the enthalpies of hydration of some alkenes which yield tertiary alcohols have been completed, as well as a study of the hydrolysis of lactones. The ``gauche effect`` has been studied, and has been shown to result from the formation of bent bonds when atoms of much different electronegativity are joined.

  7. Sulfur compounds in coal

    NASA Technical Reports Server (NTRS)

    Attar, A.; Corcoran, W. H.

    1977-01-01

    The literature on the chemical structure of the organic sulfur compounds (or functional groups) in coal is reviewed. Four methods were applied in the literature to study the sulfur compounds in coal: direct spectrometric and chemical analysis, depolymerization in drastic conditions, depolymerization in mild conditions, and studies on simulated coal. The data suggest that most of the organic sulfur in coal is in the form of thiophenic structures and aromatic and aliphatic sulfides. The relative abundance of the sulfur groups in bituminous coal is estimated as 50:30:20%, respectively. The ratio changes during processing and during the chemical analysis. The main effects are the transformation during processing of sulfides to the more stable thiophenic compounds and the elimination of hydrogen sulfide.

  8. Organic compounds in meteorites

    NASA Technical Reports Server (NTRS)

    Anders, E.; Hayatsu, R.; Studier, M. H.

    1973-01-01

    The problem of whether organic compounds originated in meteorites as a primary condensate from a solar gas or whether they were introduced as a secondary product into the meteorite during its residence in a parent body is examined by initially attempting to reconstruct the physical conditions during condensation (temperature, pressure, time) from clues in the inorganic matrix of the meteorite. The condensation behavior of carbon under these conditions is then analyzed on the basis of thermodynamic calculations, and compounds synthesized in model experiments on the condensation of carbon are compared with those actually found in meteorites. Organic compounds in meteorites seem to have formed by catalytic reactions of carbon monoxide, hydrogen, and ammonia in the solar nebula at 360 to 400 K temperature and about 3 to 7.6 microtorr pressure. The onset of these reactions was triggered by the formation of suitable catalysts (magnetite, hydrated silicates) at these temperatures.

  9. Biodegradation of perfluorinated compounds.

    PubMed

    Parsons, John R; Sáez, Monica; Dolfing, Jan; de Voogt, Pim

    2008-01-01

    The information available in the literature provides evidence for the biodegradation of some poly- and per-fluorinated compounds, but such biodegradation is incomplete and may not result in mineralization. Recent publications have demonstrated that 8:2 fluorotelomer alcohol, for example, can be degraded by bacteria from soil and wastewater treatment plants to perfluorooctanoic acid. Similarly, 2-N-ethyl(perfluorooctane sulfonamido)ethanol can be degraded by wastewater treatment sludge to perfluorooctanesulfonate. It is presently unclear whether these two products are degraded further. Therefore, the question remains as to whether there is a potential for defluorination and biodegradation of PFCs that contributes significantly to their environmental fate. The lack of mineralization observed is probably caused by the stability of the C-F bond, although there are examples of microbially catalyzed defluorination reactions. As is the case with reductive dechlorination or debromination, reductive defluorination is energetically favorable under anaerobic conditions and releases more energy than that available from sulfate reduction or methanogenesis. Consequently, we should consider the possibility that bacteria will adapt to utilize this source of energy, although evolving mechanisms to overcome the kinetic barriers to degradation of these compounds may take some time. The fact that such reactions are absent for some PFCs, to date, may be because too little time has passed for microorganisms to adapt to these potential substrates. Hence, the situation may be comparable to that of chlorinated organic compounds several decades ago. For many years, organochlorine compounds were considered to be catabolically recalcitrant; today, reductive chlorination reactions of many organochlorines, including PCBs and dioxins, are regularly observed in anaerobic environments. Hence, it is opportune and important to continue studying the potential degradation of perfluorinated compounds

  10. Microoptical compound lens

    DOEpatents

    Sweatt, William C.; Gill, David D.

    2007-10-23

    An apposition microoptical compound lens comprises a plurality of lenslets arrayed around a segment of a hollow, three-dimensional optical shell. The lenslets collect light from an object and focus the light rays onto the concentric, curved front surface of a coherent fiber bundle. The fiber bundle transports the light rays to a planar detector, forming a plurality of sub-images that can be reconstructed as a full image. The microoptical compound lens can have a small size (millimeters), wide field of view (up to 180.degree.), and adequate resolution for object recognition and tracking.

  11. Prediction of intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Burkhanov, Gennady S.; Kiselyova, N. N.

    2009-06-01

    The problems of predicting not yet synthesized intermetallic compounds are discussed. It is noted that the use of classical physicochemical analysis in the study of multicomponent metallic systems is faced with the complexity of presenting multidimensional phase diagrams. One way of predicting new intermetallics with specified properties is the use of modern processing technology with application of teaching of image recognition by the computer. The algorithms used most often in these methods are briefly considered and the efficiency of their use for predicting new compounds is demonstrated.

  12. PERSISTENT PERFLUORINATED ORGANIC COMPOUNDS

    EPA Science Inventory

    Perfluorinated compounds (PFCs) have gained notoriety in the recent past. Global distribution of PFCs in wildlife, environmental samples and humans has sparked a recent increase in new investigations concerning PFCs. Historically PFCs have been used in a wide variety of consume...

  13. Compound floating pivot micromechanisms

    DOEpatents

    Garcia, Ernest J.

    2001-04-24

    A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use compound floating pivot structures to attain far greater tilt angles than are practical using other micromechanical techniques. The new mechanisms are also capable of bi-directional tilt about multiple axes.

  14. Urinary Compounds in Autism

    ERIC Educational Resources Information Center

    Alcorn, A.; Berney, T.; Bretherton, K.; Mills, M.; Savery, D.; Shattock, P.

    2004-01-01

    Although earlier claims to identify specific compounds in the urine of people with autism had been discredited, it was subsequently suggested that there might be biochemical characteristics that were specific to early childhood, particularly in those who also did not have a severe degree of intellectual disability This study was to establish…

  15. Barium and Compounds

    Integrated Risk Information System (IRIS)

    Barium and Compounds ; CASRN 7440 - 39 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinog

  16. Lead and compounds (inorganic)

    Integrated Risk Information System (IRIS)

    Lead and compounds ( inorganic ) ; CASRN 7439 - 92 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for

  17. Fun with Ionic Compounds

    ERIC Educational Resources Information Center

    Logerwell, Mollianne G.; Sterling, Donna R.

    2007-01-01

    Ionic bonding is a fundamental topic in high school chemistry, yet it continues to be a concept that students struggle to understand. Even if they understand atomic structure and ion formation, it can be difficult for students to visualize how ions fit together to form compounds. This article describes several engaging activities that help…

  18. Selenium and Compounds

    Integrated Risk Information System (IRIS)

    Selenium and Compounds ; CASRN 7782 - 49 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  19. Fun with Ionic Compounds

    ERIC Educational Resources Information Center

    Logerwell, Mollianne G.; Sterling, Donna R.

    2007-01-01

    Ionic bonding is a fundamental topic in high school chemistry, yet it continues to be a concept that students struggle to understand. Even if they understand atomic structure and ion formation, it can be difficult for students to visualize how ions fit together to form compounds. This article describes several engaging activities that help…

  20. Energies of organic compounds

    SciTech Connect

    Wiberg, K.B.

    1995-07-01

    The studies included hydrolysis of ketals, hydration of alkenes, barrier to rotation about C-O bonds in esters and acids, hydrolysis of lactones, reduction of ketones, non-bonded interactions, and enthalpies of vaporization of ketones, ketals, and other compounds.

  1. Boron and Compounds

    Integrated Risk Information System (IRIS)

    EPA 635 / 04 / 052 www.epa.gov / iris TOXICOLOGICAL REVIEW OF BORON AND COMPOUNDS ( CAS No . 7440 - 42 - 8 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) June 2004 U.S . Environmental Protection Agency Washington , DC DISCLAIMER This document has been reviewed

  2. Zinc and Compounds

    Integrated Risk Information System (IRIS)

    EPA / 635 / R - 05 / 002 TOXICOLOGICAL REVIEW OF ZINC AND COMPOUNDS ( CAS No . 7440 - 66 - 6 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) July 2005 U.S . Environmental Protection Agency Washington D.C . DISCLAIMER This document has been reviewed in accordanc

  3. Beryllium and compounds

    Integrated Risk Information System (IRIS)

    EPA / 635 / R - 98 / 008 TOXICOLOGICAL REVIEW OF BERYLLIUM AND COMPOUNDS ( CAS No . 7440 - 41 - 7 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) April 1998 U.S . Environmental Protection Agency Washington , DC DISCLAIMER This document has been reviewed in acco

  4. A stable argon compound

    PubMed

    Khriachtchev; Pettersson; Runeberg; Lundell; Rasanen

    2000-08-24

    The noble gases have a particularly stable electronic configuration, comprising fully filled s and p valence orbitals. This makes these elements relatively non-reactive, and they exist at room temperature as monatomic gases. Pauling predicted in 1933 that the heavier noble gases, whose valence electrons are screened by core electrons and thus less strongly bound, could form stable molecules. This prediction was verified in 1962 by the preparation of xenon hexafluoroplatinate, XePtF6, the first compound to contain a noble-gas atom. Since then, a range of different compounds containing radon, xenon and krypton have been theoretically anticipated and prepared. Although the lighter noble gases neon, helium and argon are also expected to be reactive under suitable conditions, they remain the last three long-lived elements of the periodic table for which no stable compound is known. Here we report that the photolysis of hydrogen fluoride in a solid argon matrix leads to the formation of argon fluorohydride (HArF), which we have identified by probing the shift in the position of vibrational bands on isotopic substitution using infrared spectroscopy. Extensive ab initio calculations indicate that HArF is intrinsically stable, owing to significant ionic and covalent contributions to its bonding, thus confirming computational predictions that argon should form a stable hydride species with properties similar to those of the analogous xenon and krypton compounds reported before.

  5. 8-fluoropurine compounds

    SciTech Connect

    Barrio, Jorge R.; Satyamurthy, Nagichettiar; Namavari, Mohammad; Phelps, Michael E.

    2001-01-01

    An efficient, regiocontrolled approach to the synthesis of 8-fluoropurines by direct fluorination of purines with dilute elemental fluorine, or acetyl hypofluorite, is provided. In a preferred embodiment, a purine compound is dissolved in a polar solvent and reacted with a dilute mixture of F.sub.2 in He or other inert gas.

  6. Urinary Compounds in Autism

    ERIC Educational Resources Information Center

    Alcorn, A.; Berney, T.; Bretherton, K.; Mills, M.; Savery, D.; Shattock, P.

    2004-01-01

    Although earlier claims to identify specific compounds in the urine of people with autism had been discredited, it was subsequently suggested that there might be biochemical characteristics that were specific to early childhood, particularly in those who also did not have a severe degree of intellectual disability This study was to establish…

  7. Aminopropyl thiophene compounds

    DOEpatents

    Goodman, Mark M.; Knapp, Jr., Furn F.

    1990-01-01

    Radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain.

  8. Toxicity of dipyridyl compounds and related compounds.

    PubMed

    Li, Shenggang; Crooks, Peter A; Wei, Xiaochen; de Leon, Jose

    2004-01-01

    Five dipyridyl isomers, 2,2'-, 2,3'-, 2,4'-, 3,3'-, and 4,4'-dipyridyl, are products resulting from the pyrolytic degradation of tobacco products and degradation of the herbicide paraquat, and therefore may be present in the environment. In this article, the toxicological properties of these dipyridyl isomers in humans and animals are reviewed. Epidemiological studies suggest that cancerous skin lesions in workers involved in the manufacturing of paraquat may be associated with exposure to dipyridyl compounds. Experimental animal studies suggest that dipyridyl isomers may have several toxicological effects. Three of the dipyridyl isomers (the 2,2', 2,4', and 4,4' isomers) appear to be inducers of some metabolic enzymes. The 2,2'-dipyridyl isomer, an iron chelator, appears to influence vasospasm in primate models of stroke. The cytotoxic effects of 2,2'-dipyridyl on several leukemia cell lines have been reported, and a potent teratogenic effect of 2,2'-dipyridyl has been observed in rats. Based on the results of paraquat studies in experimental animal models, it has been proposed that paraquat may have deleterious effects on dopaminergic neurons. These findings support the epidemiological evidence that paraquat exposure may be associated with the development of Parkinson's disease. Studies designed to determine an association between paraquat exposure and Parkinson's disease are complicated by the possibility that metabolic changes may influence the neurotoxicity of paraquat and/or its metabolites. Preliminary unpublished data in mice show that 300-mg/kg doses of 2,2'-dipyridyl are neurotoxic, and 300-mg/kg doses of 2,4'- and 4,4'-dipyridyls are lethal. These results are consistent with earlier studies in Sherman rats using high 2,2'- and 4,4'-dipyridyl doses. New studies are needed to further explore the toxicological properties of dipyridyls and their potential public health impact.

  9. Organic compounds in meteorites

    NASA Technical Reports Server (NTRS)

    Lawless, J. G.

    1980-01-01

    Recent studies of carbonaceous chondrites provide evidence that certain organic compounds are indigenous and the result of an abiotic, chemical synthesis. The results of several investigators have established the presence of amino acids and precursors, mono- and dicarboxylic acids, N-heterocycles, and hydrocarbons as well as other compounds. For example, studies of the Murchison and Murray meteorites have revealed the presence of at least 40 amino acids with nearly equal abundances of D and L isomers. The population consists of both protein and nonprotein amino acids including a wide variety of linear, cyclic, and polyfunctional types. Results show a trend of decreasing concentration with increasing carbon number, with the most abundant being glycine (41 n Moles/g). These and other results to be reviewed provide persuasive support for the theory of chemical evolution and provide the only natural evidence for the protobiological subset of molecules from which life on earth may have arisen.

  10. Oral compound nevus.

    PubMed

    Cardoso, Lyzete Berriel; Consalaro, Alberto; da Silva Santos, Paulo Sérgio; da Silva Sampieri, Marcelo Bonifácio; Tinoco-Araújo, José Endrigo

    2014-02-18

    The melanocytic nevus is a benign and focal proliferation of nevus cells that can be congenital or acquired. Intraoral lesions are uncommon, and the etiology and pathogenesis are poorly understood. The occurrence rate of oral compound nevus is about 5.9% to 16.5% of all oral melanocytic nevi. A 22-year-old male patient presented with a dark brown macule on the buccal mucosa of the maxilla in the region of tooth 26. The lesion was elliptical, 0.7 x 0.5 cm, well circumscribed, asymptomatic, and the evolution time was unknown. An excisional biopsy was performed and microscopic analysis revealed nests of nevus cells in the epithelium and underlying connective tissue that were compatible with melanocytic compound nevus. Owing to the clinical similarity between oral melanocytic nevus and oral melanoma, a histopathological analysis is mandatory for definitive diagnosis.

  11. The Modern Compound Bow.

    PubMed

    Sung, LokMan; Kesha, Kilak; Avedschmidt, Sarah; Root, Kelly; Hlavaty, Leigh

    2017-06-12

    Bows and arrows are ancient weapons that have risen and fallen as the preeminent armaments used by man. Because of the ubiquity of firearms, fatalities from archery injuries in the United States have radically declined. However, when deaths involving this weapon do present themselves, the paucity of reference materials can be a hurdle for forensic pathologists and other forensic scientists. This article will provide a brief history of the origins of the bow and the inception of the compound bow. Comparing and contrasting the structures comprising a traditional bow to those of the modern compound bow will provide insight into how these components function in unison to propel arrows. © 2017 American Academy of Forensic Sciences.

  12. Thermodynamics of Organic Compounds

    DTIC Science & Technology

    1981-01-01

    Organic Compounds by I A. Hossenlopp and D. W. Scott -- Journal of Chemical Thermodynamics , 13, No. 5, 405-414 (1981). t 1 I- i !I *1 I I ~ I [LI...National Bureau of Standards CINDAS Chemical Thermodynamics Division Purdue University Research Park Attn: Dr Stan Abramowitz Attn: Dr H H Li Mr David... Chemical Thermodynamics Division AFAOL/RJT (Dr 7 D Stull) Attn: Mr Donald D Wagman Wright-Patterson AFB, OH 45433 Washington, DC 20234 U.S. Army

  13. Antitumor compounds from tunicates.

    PubMed

    Rinehart, K L

    2000-01-01

    Of the six marine-derived compounds that have reached clinical trials as antitumor agents three-didemnin B, Aplidine, and ecteinascidin 743-are derived from tunicates. Di-demnin B (DB), a cyclic depsipeptide from the compound tunicate Trididemnum solidum, was the first marine-derived compound to enter Phases I and II clinical trials. The Phase II studies, sponsored by the U. S. National Cancer Institute, indicated complete or partial remissions with non-Hodgkins lymphoma, but cardiotoxicity caused didemnin B to be dropped from further study. The closely related dehydrodidemnin B (DDB, Aplidine) was isolated in 1988 from a second colonial tunicate, Aplidium albicans, and spectroscopic studies assigned a structural formula in which a pyruvyl group in DDB replaced the lactyl group in DB and syntheses of DDB have been achieved. Aplidine is more active than DB and lacks DB's cardiotoxicity. It was introduced by PharmaMar into Phase I clinical trials in January 1999. The second family of tunicate-derived antitumor agents are the ecteinascidins (ETs), from the mangrove tunicate Ecteinascidia turbinata. The antitumor extracts of E. turbinata were first described in 1969, but the small amount of ETs in E. turbinata prevented their isolation for over a decade. The structures of ETs have been assigned mainly by spectroscopy. Phase II clinical trials with ET 743 are underway. Future supplies of ET's should be available from aquaculture or synthesis. Copyright 2000 John Wiley & Sons, Inc. Med Res Rev, 20, No. 1, 1-27, 2000

  14. Compound chondrules fused cold

    NASA Astrophysics Data System (ADS)

    Hubbard, Alexander

    2015-07-01

    About 4-5% of chondrules are compound: two separate chondrules stuck together. This is commonly believed to be the result of the two component chondrules having collided shortly after forming, while still molten. This allows high velocity impacts to result in sticking. However, at T ∼ 1100 K, the temperature below which chondrules collide as solids (and hence usually bounce), coalescence times for droplets of appropriate composition are measured in tens of seconds. Even at 1025 K, at which temperature theory predicts that the chondrules must have collided extremely slowly to have stuck together, the coalescence time scale is still less than an hour. These coalescence time scales are too short for the collision of molten chondrules to explain the observed frequency of compound chondrules. We suggest instead a scenario where chondrules stuck together in slow collisions while fully solid; and the resulting chondrule pair was subsequently briefly heated to a temperature in the range of 900-1025 K. In that temperature window the coalescence time is finite but long, covering a span of hours to a decade. This is particularly interesting because those temperatures are precisely the critical window for thermally ionized MRI activity, so compound chondrules provide a possible probe into that vital regime.

  15. Antifungal compounds from cyanobacteria.

    PubMed

    Shishido, Tânia K; Humisto, Anu; Jokela, Jouni; Liu, Liwei; Wahlsten, Matti; Tamrakar, Anisha; Fewer, David P; Permi, Perttu; Andreote, Ana P D; Fiore, Marli F; Sivonen, Kaarina

    2015-04-13

    Cyanobacteria are photosynthetic prokaryotes found in a range of environments. They are infamous for the production of toxins, as well as bioactive compounds, which exhibit anticancer, antimicrobial and protease inhibition activities. Cyanobacteria produce a broad range of antifungals belonging to structural classes, such as peptides, polyketides and alkaloids. Here, we tested cyanobacteria from a wide variety of environments for antifungal activity. The potent antifungal macrolide scytophycin was detected in Anabaena sp. HAN21/1, Anabaena cf. cylindrica PH133, Nostoc sp. HAN11/1 and Scytonema sp. HAN3/2. To our knowledge, this is the first description of Anabaena strains that produce scytophycins. We detected antifungal glycolipopeptide hassallidin production in Anabaena spp. BIR JV1 and HAN7/1 and in Nostoc spp. 6sf Calc and CENA 219. These strains were isolated from brackish and freshwater samples collected in Brazil, the Czech Republic and Finland. In addition, three cyanobacterial strains, Fischerella sp. CENA 298, Scytonema hofmanni PCC 7110 and Nostoc sp. N107.3, produced unidentified antifungal compounds that warrant further characterization. Interestingly, all of the strains shown to produce antifungal compounds in this study belong to Nostocales or Stigonematales cyanobacterial orders.

  16. Toxic compounds in honey.

    PubMed

    Islam, Md Nazmul; Khalil, Md Ibrahim; Islam, Md Asiful; Gan, Siew Hua

    2014-07-01

    There is a wealth of information about the nutritional and medicinal properties of honey. However, honey may contain compounds that may lead to toxicity. A compound not naturally present in honey, named 5-hydroxymethylfurfural (HMF), may be formed during the heating or preservation processes of honey. HMF has gained much interest, as it is commonly detected in honey samples, especially samples that have been stored for a long time. HMF is a compound that may be mutagenic, carcinogenic and cytotoxic. It has also been reported that honey can be contaminated with heavy metals such as lead, arsenic, mercury and cadmium. Honey produced from the nectar of Rhododendron ponticum contains alkaloids that can be poisonous to humans, while honey collected from Andromeda flowers contains grayanotoxins, which can cause paralysis of limbs in humans and eventually leads to death. In addition, Melicope ternata and Coriaria arborea from New Zealand produce toxic honey that can be fatal. There are reports that honey is not safe to be consumed when it is collected from Datura plants (from Mexico and Hungary), belladonna flowers and Hyoscamus niger plants (from Hungary), Serjania lethalis (from Brazil), Gelsemium sempervirens (from the American Southwest), Kalmia latifolia, Tripetalia paniculata and Ledum palustre. Although the symptoms of poisoning due to honey consumption may differ depending on the source of toxins, most common symptoms generally include dizziness, nausea, vomiting, convulsions, headache, palpitations or even death. It has been suggested that honey should not be considered a completely safe food.

  17. Compound cycle engine program

    NASA Technical Reports Server (NTRS)

    Bobula, G. A.; Wintucky, W. T.; Castor, J. G.

    1986-01-01

    The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the lightweight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burned for a typical 2 hr (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. A program to establish the technology base for a Compound Cycle Engine is presented. The goal of this program is to research and develop those technologies which are barriers to demonstrating a multicylinder diesel core in the early 1990's. The major activity underway is a three-phased contract with the Garrett Turbine Engine Company to perform: (1) a light helicopter feasibility study, (2) component technology development, and (3) lubricant and material research and development. Other related activities are also presented.

  18. Offset Compound Gear Drive

    NASA Technical Reports Server (NTRS)

    Stevens, Mark A.; Handschuh, Robert F.; Lewicki, David G.

    2010-01-01

    The Offset Compound Gear Drive is an in-line, discrete, two-speed device utilizing a special offset compound gear that has both an internal tooth configuration on the input end and external tooth configuration on the output end, thus allowing it to mesh in series, simultaneously, with both a smaller external tooth input gear and a larger internal tooth output gear. This unique geometry and offset axis permits the compound gear to mesh with the smaller diameter input gear and the larger diameter output gear, both of which are on the same central, or primary, centerline. This configuration results in a compact in-line reduction gear set consisting of fewer gears and bearings than a conventional planetary gear train. Switching between the two output ratios is accomplished through a main control clutch and sprag. Power flow to the above is transmitted through concentric power paths. Low-speed operation is accomplished in two meshes. For the purpose of illustrating the low-speed output operation, the following example pitch diameters are given. A 5.0 pitch diameter (PD) input gear to 7.50 PD (internal tooth) intermediate gear (0.667 reduction mesh), and a 7.50 PD (external tooth) intermediate gear to a 10.00 PD output gear (0.750 reduction mesh). Note that it is not required that the intermediate gears on the offset axis be of the same diameter. For this example, the resultant low-speed ratio is 2:1 (output speed = 0.500; product of stage one 0.667 reduction and stage two 0.750 stage reduction). The design is not restricted to the example pitch diameters, or output ratio. From the output gear, power is transmitted through a hollow drive shaft, which, in turn, drives a sprag during which time the main clutch is disengaged.

  19. Neurotoxicity of organomercurial compounds.

    PubMed

    Sanfeliu, Coral; Sebastià, Jordi; Cristòfol, Rosa; Rodríguez-Farré, Eduard

    2003-01-01

    Mercury is a ubiquitous contaminant, and a range of chemical species is generated by human activity and natural environmental change. Elemental mercury and its inorganic and organic compounds have different toxic properties, but all them are considered hazardous in human exposure. In an equimolecular exposure basis, organomercurials with a short aliphatic chain are the most harmful compounds and they may cause irreversible damage to the nervous system. Methylmercury (CH(3)Hg(+)) is the most studied following the neurotoxic outbreaks identified as Minamata disease and the Iraq poisoning. The first description of the CNS pathology dates from 1954. Since then, the clinical neurology, the neuropathology and the mechanisms of neurotoxicity of organomercurials have been widely studied. The high thiol reactivity of CH(3)Hg(+), as well as all mercury compounds, has been suggested to be the basis of their harmful biological effects. However, there is clear selectivity of CH(3)Hg(+) for specific cell types and brain structures, which is not yet fully understood. The main mechanisms involved are inhibition of protein synthesis, microtubule disruption, increase of intracellular Ca(2+) with disturbance of neurotransmitter function, oxidative stress and triggering of excitotoxicity mechanisms. The effects are more damaging during CNS development, leading to alterations of the structure and functionality of the nervous system. The major source of CH(3)Hg(+) exposure is the consumption of fish and, therefore, its intake is practically unavoidable. The present concern is on the study of the effects of low level exposure to CH(3)Hg(+) on human neurodevelopment, with a view to establishing a safe daily intake. Recommendations are 0.4 micro g/kg body weight/day by the WHO and US FDA and, recently, 0.1 micro g/kg body weight/day by the US EPA. Unfortunately, these levels are easily attained with few meals of fish per week, depending on the source of the fish and its position in the

  20. Superconductivity in plutonium compounds

    NASA Astrophysics Data System (ADS)

    Sarrao, J. L.; Bauer, E. D.; Mitchell, J. N.; Tobash, P. H.; Thompson, J. D.

    2015-07-01

    Although the family of plutonium-based superconductors is relatively small, consisting of four compounds all of which crystallize in the tetragonal HoCoGa5 structure, these materials serve as an important bridge between the known Ce- and U-based heavy fermion superconductors and the high-temperature cuprate superconductors. Further, the partial localization of 5f electrons that characterizes the novel electronic properties of elemental plutonium appears to be central to the relatively high superconducting transition temperatures that are observed in PuCoGa5, PuRhGa5, PuCoIn5, and PuRhIn5.

  1. Immunomodulating compounds in Basidiomycetes

    PubMed Central

    Mizuno, Masashi; Nishitani, Yosuke

    2013-01-01

    Mushrooms are distinguished as important food containing immunomodulating and anticancer agents. These compounds belong mostly to polysaccharides especially β-d-glucans. Among them, β-1,3-glucan with side chain β-1,6-glucose residues have more important roles in immunomodulating and antitumor activities. In this review, we have introduced polysaccharide mainly from Lentinula edodes and Agaricus blazei Murill with immunomodulating and antitumor activities. In addition, the mechanism of activation of immune response and signal cascade are also reviewed. PMID:23704809

  2. Boronated porphyrin compounds

    DOEpatents

    Kahl, Stephen B.; Koo, Myoung-Seo

    1992-01-01

    A compound is described having the structure ##STR1## where R preferably is ##STR2## and most preferably R.sup.3 is a closo-carborane and R.sup.2 is --H, an alkyl or aryl having 1 to about 7 carbon atoms, This invention was made with Government support under NIH Grant No. CA-37961 awarded by the Department of Health and Human Services and under the Associated Universities Inc. Contract No. De-AC02-76CH00016 with the U.S. Department of Energy. The Government has rights in this invention.

  3. Boronated porphyrin compounds

    DOEpatents

    Kahl, S.B.; Koo, M.S.

    1992-09-22

    A compound is described having the structure ##STR1## where R preferably is ##STR2## and most preferably R.sup.3 is a closo-carborane and R.sup.2 is --H, an alkyl or aryl having 1 to about 7 carbon atoms, This invention was made with Government support under NIH Grant No. CA-37961 awarded by the Department of Health and Human Services and under the Associated Universities Inc. Contract No. De-AC02-76CH00016 with the U.S. Department of Energy. The Government has rights in this invention.

  4. Compound Semiconductor Characterization.

    DTIC Science & Technology

    1984-06-08

    Elsevier, New York, 1979). 12. I.R. Sites and 11.11. Wieder, [EEE Trans. Electron Devices, ED-27, 2277 (1980). 13. P.R. Jay and R.H. Wallis, IEEE...Orpington, U. K., 1980). 18. .. Hallais, A. Mircea -Roussel, J.P. Farges, and ;. Poiblaud, in Call im Arsenide and Related Compounds (St. Louis 1976...1979). 78 q 21. P.B. Klei~n, P.IK.R. Nordquist, and P.C. Siebenmann, J. Appl. Phys. 51, 4861 (1980). 22. A. Mircea -Roussel, G. Jacob, and J.P. Hallais

  5. Oligosilanylated Antimony Compounds

    PubMed Central

    2015-01-01

    By reactions of magnesium oligosilanides with SbCl3, a number of oligosilanylated antimony compounds were obtained. When oligosilanyl dianions were used, either the expected cyclic disilylated halostibine was obtained or alternatively the formation of a distibine was observed. Deliberate formation of the distibine from the disilylated halostibine was achieved by reductive coupling with C8K. Computational studies of Sb–Sb bond energies, barriers of pyramidal inversion at Sb, and the conformational behavior of distibines provided insight for the understanding of the spectroscopic properties. PMID:25937691

  6. Titanium alkoxide compound

    DOEpatents

    Boyle, Timothy J.

    2007-08-14

    A titanium alkoxide composition is provided, as represented by the chemical formula (OC.sub.6H.sub.5N).sub.2Ti(OC.sub.6H.sub.5NH.sub.2).sub.2. As prepared, the compound is a crystalline substance with a hexavalent titanium atom bonded to two OC.sub.6H.sub.5NH.sub.2 groups and two OC.sub.6H.sub.5N groups with a theoretical molecular weight of 480.38, comprising 60.01% C, 5.04% H and 11.66% N.

  7. Special Risks of Pharmacy Compounding

    MedlinePlus

    ... Consumer Updates RSS Feed The Special Risks of Pharmacy Compounding Get Consumer Updates by E-mail Consumer ... page: A Troubling Trend What You Can Do Pharmacy compounding is a practice in which a licensed ...

  8. FLUOROCARBON N-F COMPOUNDS

    DTIC Science & Technology

    FLUORIDES, *FLUORINATED HYDROCARBONS, ALKYL RADICALS, CARBOXYLIC ACIDS, CATALYSTS , CESIUM COMPOUNDS, CHEMICAL EQUILIBRIUM, IMIDES, IMINES, MOLECULAR...STRUCTURE, NITRILES, NUCLEAR MAGNETIC RESONANCE, PROPENES, REACTION KINETICS, SUBSTITUTION REACTIONS , SULFUR COMPOUNDS, SYNTHESIS.

  9. Color Classification of Coordination Compounds.

    ERIC Educational Resources Information Center

    Poncini, Laurence; Wimmer, Franz L.

    1987-01-01

    Proposes that colored compounds be classified by reference to a standard color-order system incorporating a color dictionary. Argues that the colors of new compounds could be incorporated into the characterization process and into computer storage systems. (TW)

  10. Color Classification of Coordination Compounds.

    ERIC Educational Resources Information Center

    Poncini, Laurence; Wimmer, Franz L.

    1987-01-01

    Proposes that colored compounds be classified by reference to a standard color-order system incorporating a color dictionary. Argues that the colors of new compounds could be incorporated into the characterization process and into computer storage systems. (TW)

  11. High temperature superconducting compounds

    NASA Astrophysics Data System (ADS)

    Goldman, Allen M.

    1992-11-01

    The major accomplishment of this grant has been to develop techniques for the in situ preparation of high-Tc superconducting films involving the use of ozone-assisted molecular beam epitaxy. The techniques are generalizable to the growth of trilayer and multilayer structures. Films of both the DyBa2Cu3O(7-x) and YBa2Cu3O(7-x) compounds as well as the La(2-x)Sr(x)CuO4 compound have been grown on the usual substrates, SrTiO3, YSZ, MgO, and LaAlO3, as well as on Si substrates without any buffer layer. A bolometer has been fabricated on a thermally isolated SiN substrate coated with YSZ, an effort carried out in collaboration with Honeywell Inc. The deposition process facilitates the fabrication of very thin and transparent films creating new opportunities for the study of superconductor-insulator transitions and the investigation of photo-doping with carriers of high temperature superconductors. In addition to a thin film technology, a patterning technology has been developed. Trilayer structures have been developed for FET devices and tunneling junctions. Other work includes the measurement of the magnetic properties of bulk single crystal high temperature superconductors, and in collaboration with Argonne National Laboratory, measurement of electric transport properties of T1-based high-Tc films.

  12. Potential risks of pharmacy compounding.

    PubMed

    Gudeman, Jennifer; Jozwiakowski, Michael; Chollet, John; Randell, Michael

    2013-03-01

    Pharmacy compounding involves the preparation of customized medications that are not commercially available for individual patients with specialized medical needs. Traditional pharmacy compounding is appropriate when done on a small scale by pharmacists who prepare the medication based on an individual prescription. However, the regulatory oversight of pharmacy compounding is significantly less rigorous than that required for Food and Drug Administration (FDA)-approved drugs; as such, compounded drugs may pose additional risks to patients. FDA-approved drugs are made and tested in accordance with good manufacturing practice regulations (GMPs), which are federal statutes that govern the production and testing of pharmaceutical products. In contrast, compounded drugs are exempt from GMPs, and testing to assess product quality is inconsistent. Unlike FDA-approved drugs, pharmacy-compounded products are not clinically evaluated for safety or efficacy. In addition, compounded preparations do not have standard product labeling or prescribing information with instructions for safe use. Compounding pharmacies are not required to report adverse events to the FDA, which is mandatory for manufacturers of FDA-regulated medications. Some pharmacies engage in activities that extend beyond the boundaries of traditional pharmacy compounding, such as large-scale production of compounded medications without individual patient prescriptions, compounding drugs that have not been approved for use in the US, and creating copies of FDA-approved drugs. Compounding drugs in the absence of GMPs increases the potential for preparation errors. When compounding is performed on a large scale, such errors may adversely affect many patients. Published reports of independent testing by the FDA, state agencies, and others consistently show that compounded drugs fail to meet specifications at a considerably higher rate than FDA-approved drugs. Compounded sterile preparations pose the additional risk

  13. Intracranial compound odontome.

    PubMed

    de Faria, Paulo Rogério; Cardoso, Sérgio Vitorino; Rocha, Ademir; Gomes, Débora Cristiane; de Castro, Samuel Caputo; Loyola, Adriano Mota

    2009-10-01

    An exceedingly rare case of an extragnathic odontome is described arising within the brain. A 10-year-old boy complained of progressive frontal headache for 5 years. Axial computerized tomography the head revealed a solid, calcified lesion with well-defined borders localized in the sellar and suprasellar region composed of multiple calcified structures resembling teeth. The diagnosis was compound odontome. Physical examination and blood analysis revealed hypopituitarism. The patient was submitted for radical tumour resection. He developed persistent diabetes insipidus, hypothyroidism and adrenal insufficiency for which appropriate replacement therapy has been necessary. This case demonstrates that an odontogenic lesion may arise in brain tissues due to the embryological relationship between primordial stomodeum and Rathke's pouch. Its development could be associated with endocrine disturbances.

  14. [Energies of organic compounds

    SciTech Connect

    Wiberg, K.B.

    1991-12-31

    The enthalpy of reduction of lactones to the corresponding diols has been determined, allowing the enthaipies of formation of the lactones to be determined. Results of this study agree well with data obtained for enthalpies of hydrolysis of the lactones. We have begun the measurement of the enthalpies of reduction of norbornanones, and we have shown that it is possible to determine the difference in energy between the exo and endo forms of the product alcohols by measuring the equilibrium constant as a function of temperature. The study of the enthalpies of hydration of carbonyl compounds has continued, and the enthalpies of hydrolysis of the corresponding ketals is being determined. The study of the enthalpies of hydration of alkenes is nearly completed, and the rearrangement reactions which were uncovered are being investigated.

  15. Public chemical compound databases.

    PubMed

    Williams, Anthony J

    2008-05-01

    The internet has rapidly become the first port of call for all information searches. The increasing array of chemistry-related resources that are now available provides chemists with a direct path to the information that was previously accessed via library services and was limited by commercial and costly resources. The diversity of the information that can be accessed online is expanding at a dramatic rate, and the support for publicly available resources offers significant opportunities in terms of the benefits to science and society. While the data online do not generally meet the quality standards of manually curated sources, there are efforts underway to gather scientists together and 'crowdsource' an improvement in the quality of the available data. This review discusses the types of public compound databases that are available online and provides a series of examples. Focus is also given to the benefits and disruptions associated with the increased availability of such data and the integration of technologies to data mine this information.

  16. Compound power plant

    SciTech Connect

    Smith, R.R.

    1991-02-05

    This patent describes a compound motor for a vehicle. It comprises: an engine defining therein a chamber for the combustion of fuel, an intake passage leading to the combustion chamber and an exhaust passage leading from the combustion chamber; a drive shaft extending from the engine; means in the engine for rotating the drive shaft in response to the combustion of fuel in the chamber; a rotary compressor at the entry end of the intake passage; a turbine at the exit end of the exhaust passage, the turbine being drivable by exhaust gases from the combustion chamber; means for selectively transferring rotational motion of the turbine to the compressor, the transferring means including a clutch for mechanically connecting or disconnecting the compressor from the turbine; a planetary gear set having a sun gear member, a ring gear member surrounding the sun gear member, a planet gear member rotatable about its own axis and meshed between the sun gear member and the ring gear member, and a planet carrier member upon which the planet gear member is mounted for revolution about the sun gear member; a gear train between one of the members of the planetary gear set and the turbine; another one of the members of the planetary gear set being driven by the shaft extending from the engine; and a final output shaft driven by a third member of the planetary gear set.

  17. Compounding with Silicones.

    PubMed

    Allen, Loyd V

    2015-01-01

    Since the 1940s, methylchlorosilanes have been used to treat glassware to prevent blood from clotting. The use of silicones in pharmaceutical and medical applications has grown to where today they are used in many life-saving devices (pacemakers, hydrocephalic shunts) and pharmaceutical applications from tubing, to excipients in topical formulations, to adhesives to affix transdermal drug delivery systems, and are also being used in products as active pharmaceutical ingredients, such as antiflatulents. About 60% of today's skin-care products now contain some type of silicone where they are considered safe and are known to provide a pleasant "silky-touch," non-greasy, and non-staining feel. Silicones exhibit many useful characteristics, and the safety of these agents supports their numerous applications; their biocompatibility is partially due to their low-chemical reactivity displayed by silicones, low-surface energy, and their hydrophobicity. Silicones are used both as active ingredients and as excipients. In addition is their use for "siliconization," or surface treatment, of many parenteral packaging components. Dimethicone and silicone oil are used as lubricants on stoppers to aid machineability, in syringes to aid piston movement, or on syringe needles to reduce pain upon injection. Silicones are also useful in pharmaceutical compounding as is discussed in this artiele included with this article are in developing formulations with silicones.

  18. Pluto's Nonvolatile Chemical Compounds

    NASA Astrophysics Data System (ADS)

    Grundy, William M.; Binzel, Richard; Cook, Jason C.; Cruikshank, Dale P.; Dalle Ore, Cristina M.; Earle, Alissa M.; Ennico, Kimberly; Jennings, Donald; Howett, Carly; Kaiser, Ralf-Ingo; Linscott, Ivan; Lunsford, A. W.; Olkin, Catherine B.; Parker, Alex Harrison; Parker, Joel Wm.; Philippe, Sylvain; Protopapa, Silvia; Quirico, Eric; Reuter, D. C.; Schmitt, Bernard; Singer, Kelsi N.; Spencer, John R.; Stansberry, John A.; Stern, S. Alan; Tsang, Constantine; Verbiscer, Anne J.; Weaver, Harold A.; Weigle, G. E.; Young, Leslie

    2016-10-01

    Despite the migration of Pluto's volatile ices (N2, CO, and CH4) around the surface on seasonal timescales, the planet's non-volatile materials are not completely hidden from view. They occur in a variety of provinces formed over a wide range of timescales, including rugged mountains and chasms, the floors of mid-latitude craters, and an equatorial belt of especially dark and reddish material typified by the informally named Cthulhu Regio. NASA's New Horizons probe observed several of these regions at spatial resolutions as fine as 3 km/pixel with its LEISA imaging spectrometer, covering wavelengths from 1.25 to 2.5 microns. Various compounds that are much lighter than the tholin-like macromolecules responsible for the reddish coloration, but that are not volatile at Pluto surface temperatures such as methanol (CH3OH) and ethane (C2H6) have characteristic absorption bands within LEISA's wavelength range. This presentation will describe their geographic distributions and attempt to constrain their origins. Possibilities include an inheritance from Pluto's primordial composition (the likely source of H2O ice seen on Pluto's surface) or ongoing production from volatile precursors through photochemistry in Pluto's atmosphere or through radiolysis on Pluto's surface. New laboratory data inform the analysis.This work was supported by NASA's New Horizons project.

  19. Method of preparing metallocene compounds

    DOEpatents

    Rosenblum, Myron; Matchett, Stephen A.

    1992-01-01

    This invention describes a novel method of preparing metallocene compounds. The invention is based on synthesis of novel bis cyclopentadienides that, under appropriate conditions, will either encapsulate a transition metal to produce a metallocene such as ferrocene, or ferrocene derivative, or will yield a polymeric metallocene. Compounds produced by this process are useful as catalysts in propulsion systems, or as anti-knock compounds in gasolines.

  20. Biomedical Compounds from Marine organisms

    PubMed Central

    Jha, Rajeev Kumar; Zi-rong, Xu

    2004-01-01

    The Ocean, which is called the ‘mother of origin of life’, is also the source of structurally unique natural products that are mainly accumulated in living organisms. Several of these compounds show pharmacological activities and are helpful for the invention and discovery of bioactive compounds, primarily for deadly diseases like cancer, acquired immuno-deficiency syndrome (AIDS), arthritis, etc., while other compounds have been developed as analgesics or to treat inflammation, etc. The life-saving drugs are mainly found abundantly in microorganisms, algae and invertebrates, while they are scarce in vertebrates. Modern technologies have opened vast areas of research for the extraction of biomedical compounds from oceans and seas.

  1. Organic Compounds in Carbonaceous Meteorites

    NASA Technical Reports Server (NTRS)

    Cooper, Grorge

    2001-01-01

    Carbonaceous meteorites are relatively enriched in soluble organic compounds. To date, these compounds provide the only record available to study a range of organic chemical processes in the early Solar System chemistry. The Murchison meteorite is the best-characterized carbonaceous meteorite with respect to organic chemistry. The study of its organic compounds has related principally to aqueous meteorite parent body chemistry and compounds of potential importance for the origin of life. Among the classes of organic compounds found in Murchison are amino acids, amides, carboxylic acids, hydroxy acids, sulfonic acids, phosphonic acids, purines and pyrimidines (Table 1). Compounds such as these were quite likely delivered to the early Earth in asteroids and comets. Until now, polyhydroxylated compounds (polyols), including sugars (polyhydroxy aldehydes or ketones), sugar alcohols, sugar acids, etc., had not been identified in Murchison. Ribose and deoxyribose, five-carbon sugars, are central to the role of contemporary nucleic acids, DNA and RNA. Glycerol, a three-carbon sugar alcohol, is a constituent of all known biological membranes. Due to the relative lability of sugars, some researchers have questioned the lifetime of sugars under the presumed conditions on the early Earth and postulated other (more stable) compounds as constituents of the first replicating molecules. The identification of potential sources and/or formation mechanisms of pre-biotic polyols would add to the understanding of what organic compounds were available, and for what length of time, on the ancient Earth.

  2. Transition Metal Compounds Towards Holography

    PubMed Central

    Dieckmann, Volker; Eicke, Sebastian; Springfeld, Kristin; Imlau, Mirco

    2012-01-01

    We have successfully proposed the application of transition metal compounds in holographic recording media. Such compounds feature an ultra-fast light-induced linkage isomerization of the transition-metal–ligand bond with switching times in the sub-picosecond regime and lifetimes from microseconds up to hours at room temperature. This article highlights the photofunctionality of two of the most promising transition metal compounds and the photophysical mechanisms that are underlying the hologram recording. We present the latest progress with respect to the key measures of holographic media assembled from transition metal compounds, the molecular embedding in a dielectric matrix and their impressive potential for modern holographic applications. PMID:28817028

  3. Saturn's Stratospheric Oxygen Compounds

    NASA Astrophysics Data System (ADS)

    Romani, Paul N.; Delgado Díaz, Héctor E.; Bjoraker, Gordon; Hesman, Brigette; Achterberg, Richard

    2016-10-01

    There are three known oxygenated species present in Saturn's upper atmosphere: H2O, CO and CO2. The ultimate source of the water must be external to Saturn as Saturn's cold tropopause effectively prevents any internal water from reaching the upper atmosphere. The carbon monoxide and dioxide source(s) could be internal, external, produced by the photochemical interaction of water with Saturn's stratospheric hydrocarbons or some combination of all of these. At this point it is not clear what the external source(s) are.Cassini's Composite InfraRed Spectrometer (CIRS) has detected emission lines of H2O and CO2 (Hesman et al., DPS 2015, 311.16 & Abbas et al. 2013, Ap. J. doi:10.1088/0004-637X/776/2/73) on Saturn. CIRS also retrieves the temperature of the stratosphere using CH4 lines at 7.7 microns. Using CIRS retrieved temperatures, the mole fraction of H2O at the 0.5-5 mbar level can be retrieved and the CO2 mole fraction at ~1-10 mbar. Coupled with ground based observations of CO (Cavalié et al., 2010, A&A, DOI: 10.1051/0004-6361/200912909) these observations provide a complete oxygen compound data set to test photochemical models.Preliminary results will be presented with an emphasis on upper limit analysis to determine the percentage of stratospheric CO and CO2 that can be produced photochemically from CIRS observational constraints on the H2O profile.

  4. Antimicrobial compounds in tears.

    PubMed

    McDermott, Alison M

    2013-12-01

    The tear film coats the cornea and conjunctiva and serves several important functions. It provides lubrication, prevents drying of the ocular surface epithelia, helps provide a smooth surface for refracting light, supplies oxygen and is an important component of the innate defense system of the eye providing protection against a range of potential pathogens. This review describes both classic antimicrobial compounds found in tears such as lysozyme and some more recently identified such as members of the cationic antimicrobial peptide family and surfactant protein-D as well as potential new candidate molecules that may contribute to antimicrobial protection. As is readily evident from the literature review herein, tears, like all mucosal fluids, contain a plethora of molecules with known antimicrobial effects. That all of these are active in vivo is debatable as many are present in low concentrations, may be influenced by other tear components such as the ionic environment, and antimicrobial action may be only one of several activities ascribed to the molecule. However, there are many studies showing synergistic/additive interactions between several of the tear antimicrobials and it is highly likely that cooperativity between molecules is the primary way tears are able to afford significant antimicrobial protection to the ocular surface in vivo. In addition to effects on pathogen growth and survival some tear components prevent epithelial cell invasion and promote the epithelial expression of innate defense molecules. Given the protective role of tears a number of scenarios can be envisaged that may affect the amount and/or activity of tear antimicrobials and hence compromise tear immunity. Two such situations, dry eye disease and contact lens wear, are discussed here. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Antimicrobial Compounds in Tears

    PubMed Central

    McDermott, Alison M.

    2013-01-01

    The tear film coats the cornea and conjunctiva and serves several important functions. It provides lubrication, prevents drying of the ocular surface epithelia, helps provide a smooth surface for refracting light, supplies oxygen and is an important component of the innate defense system of the eye providing protection against a range of potential pathogens. This review describes both classic antimicrobial compounds found in tears such as lysozyme and some more recently identified such as members of the cationic antimicrobial peptide family and surfactant protein-D as well as potential new candidate molecules that may contribute to antimicrobial protection. As is readily evident from the literature review herein, tears, like all mucosal fluids, contain a plethora of molecules with known antimicrobial effects. That all of these are active in vivo is debatable as many are present in low concentrations, may be influenced by other tear components such as the ionic environment, and antimicrobial action may be only one of several activities ascribed to the molecule. However, there are many studies showing synergistic/additive interactions between several of the tear antimicrobials and it is highly likely that cooperativity between molecules is the primary way tears are able to afford significant antimicrobial protection to the ocular surface in vivo. In addition to effects on pathogen growth and survival some tear components prevent epithelial cell invasion and promote the epithelial expression of innate defense molecules. Given the protective role of tears a number of scenarios can be envisaged that may affect the amount and/or activity of tear antimicrobials and hence compromise tear immunity. Two such situations, dry eye disease and contact lens wear, are discussed here. PMID:23880529

  6. Antifungal Compounds from Piper Species

    PubMed Central

    Xu, Wen-Hui; Li, Xing-Cong

    2013-01-01

    This review documents chemical structures and antifungal activities of 68 compounds isolated from 22 Piper species of the plant family Piperaceae. These compounds include amides, flavonoids, prenylated benzoic acid derivatives, lignans, phenylpropanoids, butenolides, and cyclopentendiones. Some of them may serve as leads for potential pharmaceutical or agricultural fungicide development. PMID:24307889

  7. Morphological Dynamics in Compound Processing

    ERIC Educational Resources Information Center

    Kuperman, Victor; Bertram, Raymond; Baayen, R. Harald

    2008-01-01

    This paper explores the time-course of morphological processing of trimorphemic Finnish compounds. We find evidence for the parallel access to full-forms and morphological constituents diagnosed by the early effects of compound frequency, as well as early effects of left constituent frequency and family size. We also observe an interaction between…

  8. METHOD OF REDUCING PLUTONIUM COMPOUNDS

    DOEpatents

    Johns, I.B.

    1958-06-01

    A method is described for reducing plutonium compounds in aqueous solution from a higher to a lower valence state. This reduction of valence is achieved by treating the aqueous solution of higher valence plutonium compounds with hydrogen in contact with an activated platinum catalyst.

  9. Testing of Experimental Antileishmanial Compounds.

    DTIC Science & Technology

    1994-10-19

    administrative and clerical assistance and Ms. Barbara L. Harris, Laboratory Technician II, for technical assistance with this study. Their efforts are appreciated...braziliensis) leishmaniasis . Although several new compounds have been identified with activity against L. (V.) braziliensis, none have shown adequate promise...to warrant initiation of clinical trials. However, among the most promising active compounds found against visceral leishmaniasis during these

  10. Bilingual Reading of Compound Words

    ERIC Educational Resources Information Center

    Ko, In Yeong; Wang, Min; Kim, Say Young

    2011-01-01

    The present study investigated whether bilingual readers activate constituents of compound words in one language while processing compound words in the other language via decomposition. Two experiments using a lexical decision task were conducted with adult Korean-English bilingual readers. In Experiment 1, the lexical decision of real English…

  11. Bilingual Reading of Compound Words

    ERIC Educational Resources Information Center

    Ko, In Yeong; Wang, Min; Kim, Say Young

    2011-01-01

    The present study investigated whether bilingual readers activate constituents of compound words in one language while processing compound words in the other language via decomposition. Two experiments using a lexical decision task were conducted with adult Korean-English bilingual readers. In Experiment 1, the lexical decision of real English…

  12. Devices for collecting chemical compounds

    DOEpatents

    Scott, Jill R; Groenewold, Gary S

    2013-12-24

    A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

  13. Novel bioactive compounds from actinomycetes.

    PubMed

    Sanglier, J J; Wellington, E M; Behal, V; Fiedler, H P; Ellouz Ghorbel, R; Finance, C; Hacene, M; Kamoun, A; Kelly, C; Mercer, D K

    1993-10-01

    Actinomycetes form an enormous reservoir of secondary metabolites and enzymes. The potential for exploiting rare actinomycetes is highlighted by the discovery of novel compounds from strains of Spirillospora and Nocardioides. Novel compounds of well known classes of antibiotics, such as polyenes, continue to be discovered. For compounds containing a chromophore, the analysis by high-performance liquid chromatography coupled with a diode-array detector enables the elimination of producers of known compounds and facilitates the discovery of novel compounds or derivatives. The complexity of the regulatory mechanisms is illustrated by glutamine synthetase. The characterization of thermostable amylolytic, lignolytic, peroxidase and neuramidase activities, and the isolation of novel cellulolytic actinomycetes clearly demonstrate the potential of Actinomycetes as producers of enzymes.

  14. Assimilation of Unusual Carbon Compounds

    NASA Astrophysics Data System (ADS)

    Middelhoven, Wouter J.

    Yeast taxa traditionally are distinguished by growth tests on several sugars and organic acids. During the last decades it became apparent that many yeast species assimilate a much greater variety of naturally occurring carbon compounds as sole source of carbon and energy. These abilities are indicative of a greater role of yeasts in the carbon cycle than previously assumed. Especially in acidic soils and other habitats, yeasts may play a role in the degradation of carbon compounds. Such compounds include purines like uric acid and adenine, aliphatic amines, diamines and hydroxyamines, phenolics and other benzene compounds and polysaccharides. Assimilation of purines and amines is a feature of many ascomycetes and basidiomycetes. However, benzene compounds are degraded by only a few ascomycetous yeasts (e.g. the Stephanoascus/ Blastobotrys clade and black yeastlike fungi) but by many basidiomycetes, e.g. Filobasidiales, Trichosporonales, red yeasts producing ballistoconidia and related species, but not by Tremellales. Assimilation of polysaccharides is wide-spread among basidiomycetes

  15. Complex chemistry with complex compounds

    NASA Astrophysics Data System (ADS)

    Eichler, Robert; Asai, M.; Brand, H.; Chiera, N. M.; Di Nitto, A.; Dressler, R.; Düllmann, Ch. E.; Even, J.; Fangli, F.; Goetz, M.; Haba, H.; Hartmann, W.; Jäger, E.; Kaji, D.; Kanaya, J.; Kaneya, Y.; Khuyagbaatar, J.; Kindler, B.; Komori, Y.; Kraus, B.; Kratz, J. V.; Krier, J.; Kudou, Y.; Kurz, N.; Miyashita, S.; Morimoto, K.; Morita, K.; Murakami, M.; Nagame, Y.; Ooe, K.; Piguet, D.; Sato, N.; Sato, T. K.; Steiner, J.; Steinegger, P.; Sumita, T.; Takeyama, M.; Tanaka, K.; Tomitsuka, T.; Toyoshima, A.; Tsukada, K.; Türler, A.; Usoltsev, I.; Wakabayashi, Y.; Wang, Y.; Wiehl, N.; Wittwer, Y.; Yakushev, A.; Yamaki, S.; Yano, S.; Yamaki, S.; Qin, Z.

    2016-12-01

    In recent years gas-phase chemical studies assisted by physical pre-separation allowed for the investigation of fragile single molecular species by gas-phase chromatography. The latest success with the heaviest group 6 transactinide seaborgium is highlighted. The formation of a very volatile hexacarbonyl compound Sg(CO)6 was observed similarly to its lighter homologues molybdenum and tungsten. The interactions of these gaseous carbonyl complex compounds with quartz surfaces were investigated by thermochromatography. Second-generation experiments are under way to investigate the intramolecular bond between the central metal atom of the complexes and the ligands addressing the influence of relativistic effects in the heaviest compounds. Our contribution comprises some aspects of the ongoing challenging experiments as well as an outlook towards other interesting compounds related to volatile complex compounds in the gas phase.

  16. Bismuth compounds in medicinal chemistry.

    PubMed

    Salvador, Jorge A R; Figueiredo, Sandra A C; Pinto, Rui M A; Silvestre, Samuel M

    2012-07-01

    In recent years, the chemical potential of bismuth and bismuth compounds has been actively exploited. Bismuth salts are known for their low toxicity, making them potential valuable reagents for large-scale synthesis, which becomes more obvious when dealing with products such as active pharmaceutical ingredients or synthetic intermediates. Conversely, bismuth compounds have been widely used in medicine. After extensive use in the treatments of syphilis and other bacterial infections before the advent of modern antibiotics, bismuth compounds remain important for the treatment of several gastrointestinal disorders and also exhibit antimicrobial properties and cytotoxic activity, among others. This review updates relevant advances in the past few years, concerning the application of bismuth reagents and catalysts in innovative synthetic processes for the preparation of compounds of medicinal interest, as well as the preparation, biological evaluation and potential medicinal uses of bismuth compounds.

  17. Current Research on Antiepileptic Compounds.

    PubMed

    Wei, Cheng-Xi; Bian, Ming; Gong, Guo-Hua

    2015-11-20

    Epilepsy affects about 1% of the world's population. Due to the fact all antiepileptic drugs (AEDs) have some undesirable side effects and about 30% of epileptic patients are not seizure-free with the existing AEDs, there is still an urgent need for the development of more effective and safer AEDs. Based on our research work on antiepileptic compounds and other references in recent years, this review covers the reported work on antiepileptic compounds which are classified according to their structures. This review summarized 244 significant anticonvulsant compounds which are classified by functional groups according to the animal model data, although there are some limitations in the data. This review highlights the properties of new compounds endowed with promising antiepileptic properties, which may be proven to be more effective and selective, and possibly free of unwanted side effects. The reviewed compounds represent an interesting possibility to overcome refractory seizures and to reduce the percentage of patients with a poor response to drug therapy.

  18. Membrane rejection of nitrogen compounds

    NASA Technical Reports Server (NTRS)

    Lee, S.; Lueptow, R. M.

    2001-01-01

    Rejection characteristics of nitrogen compounds were examined for reverse osmosis, nanofiltration, and low-pressure reverse osmosis membranes. The rejection of nitrogen compounds is explained by integrating experimental results with calculations using the extended Nernst-Planck model coupled with a steric hindrance model. The molecular weight and chemical structure of nitrogen compounds appear to be less important in determining rejection than electrostatic properties. The rejection is greatest when the Donnan potential exceeds 0.05 V or when the ratio of the solute radius to the pore radius is greater than 0.8. The transport of solute in the pore is dominated by diffusion, although convective transport is significant for organic nitrogen compounds. Electromigration contributes negligibly to the overall solute transport in the membrane. Urea, a small organic compound, has lower rejection than ionic compounds such as ammonium, nitrate, and nitrite, indicating the critical role of electrostatic interaction in rejection. This suggests that better treatment efficiency for organic nitrogen compounds can be obtained after ammonification of urea.

  19. Membrane rejection of nitrogen compounds

    NASA Technical Reports Server (NTRS)

    Lee, S.; Lueptow, R. M.

    2001-01-01

    Rejection characteristics of nitrogen compounds were examined for reverse osmosis, nanofiltration, and low-pressure reverse osmosis membranes. The rejection of nitrogen compounds is explained by integrating experimental results with calculations using the extended Nernst-Planck model coupled with a steric hindrance model. The molecular weight and chemical structure of nitrogen compounds appear to be less important in determining rejection than electrostatic properties. The rejection is greatest when the Donnan potential exceeds 0.05 V or when the ratio of the solute radius to the pore radius is greater than 0.8. The transport of solute in the pore is dominated by diffusion, although convective transport is significant for organic nitrogen compounds. Electromigration contributes negligibly to the overall solute transport in the membrane. Urea, a small organic compound, has lower rejection than ionic compounds such as ammonium, nitrate, and nitrite, indicating the critical role of electrostatic interaction in rejection. This suggests that better treatment efficiency for organic nitrogen compounds can be obtained after ammonification of urea.

  20. Photoprotective compounds from marine organisms.

    PubMed

    Rastogi, Rajesh P; Richa; Sinha, Rajeshwar P; Singh, Shailendra P; Häder, Donat-P

    2010-06-01

    The substantial loss in the stratospheric ozone layer and consequent increase in solar ultraviolet radiation on the earth's surface have augmented the interest in searching for natural photoprotective compounds in organisms of marine as well as freshwater ecosystems. A number of photoprotective compounds such as mycosporine-like amino acids (MAAs), scytonemin, carotenoids and several other UV-absorbing substances of unknown chemical structure have been identified from different organisms. MAAs form the most common class of UV-absorbing compounds known to occur widely in various marine organisms; however, several compounds having UV-screening properties still need to be identified. The synthesis of scytonemin, a predominant UV-A-photoprotective pigment, is exclusively reported in cyanobacteria. Carotenoids are important components of the photosynthetic apparatus that serve both light-harvesting and photoprotective functions, either by direct quenching of the singlet oxygen or other toxic reactive oxygen species or by dissipating the excess energy in the photosynthetic apparatus. The production of photoprotective compounds is affected by several environmental factors such as different wavelengths of UVR, desiccation, nutrients, salt concentration, light as well as dark period, and still there is controversy about the biosynthesis of various photoprotective compounds. Recent studies have focused on marine organisms as a source of natural bioactive molecules having a photoprotective role, their biosynthesis and commercial application. However, there is a need for extensive work to explore the photoprotective role of various UV-absorbing compounds from marine habitats so that a range of biotechnological and pharmaceutical applications can be found.

  1. Compound curvature laser window development

    NASA Technical Reports Server (NTRS)

    Verhoff, Vincent G.

    1993-01-01

    The NASA Lewis Research Center has developed and implemented a unique process for forming flawless compound curvature laser windows. These windows represent a major part of specialized, nonintrusive laser data acquisition systems used in a variety of compressor and turbine research test facilities. This report summarizes the main aspects of compound curvature laser window development. It is an overview of the methodology and the peculiarities associated with the formulation of these windows. Included in this discussion is new information regarding procedures for compound curvature laser window development.

  2. Polishing compound for plastic surfaces

    SciTech Connect

    Stowell, Michael S.

    1995-01-01

    A polishing compound for plastic surfaces. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS.TM., LEXAN.TM., LUCITE.TM., polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  3. Polishing compound for plastic surfaces

    DOEpatents

    Stowell, M.S.

    1993-01-01

    A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains colloidal silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{sup TM}, LEXAN{sup TM}, LUCITE{sup TM}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  4. Polishing compound for plastic surfaces

    DOEpatents

    Stowell, M.S.

    1995-08-22

    A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired. 5 figs.

  5. MEASUREMENT OF INFRARED SPECTRA AND CHEMICAL BONDING OF INORGANIC COMPOUNDS.

    DTIC Science & Technology

    CHROMATES, SELENIUM COMPOUNDS, PERMANGANATES, FLUOBORATES , LITHIUM FLUORIDES, BELGIUM...CRYSTAL STRUCTURE, SODIUM CHLORIDE, LITHIUM COMPOUNDS, BARIUM COMPOUNDS, ALKALINE EARTH COMPOUNDS, ALKALI METAL COMPOUNDS, SULFATES, PERCHLORATES

  6. Compound cueing in free recall

    PubMed Central

    Lohnas, Lynn J.; Kahana, Michael J.

    2013-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cueing in free recall. Specifically, the temporal contiguity effect should be greater when the two most recently recalled items were studied in contiguous list positions. A meta-analysis of published free recall experiments demonstrates evidence for compound cueing in both conditional response probabilities and inter-response times. To help rule out a rehearsal-based account of these compound cueing effects, we conducted an experiment with immediate, delayed and continual-distractor free recall conditions. Consistent with retrieved context theory but not with a rehearsal-based account, compound cueing was present in all conditions, and was not significantly influenced by the presence of interitem distractors. PMID:23957364

  7. Phenolic compounds in Brassica vegetables.

    PubMed

    Cartea, María Elena; Francisco, Marta; Soengas, Pilar; Velasco, Pablo

    2010-12-30

    Phenolic compounds are a large group of phytochemicals widespread in the plant kingdom. Depending on their structure they can be classified into simple phenols, phenolic acids, hydroxycinnamic acid derivatives and flavonoids. Phenolic compounds have received considerable attention for being potentially protective factors against cancer and heart diseases, in part because of their potent antioxidative properties and their ubiquity in a wide range of commonly consumed foods of plant origin. The Brassicaceae family includes a wide range of horticultural crops, some of them with economic significance and extensively used in the diet throughout the world. The phenolic composition of Brassica vegetables has been recently investigated and, nowadays, the profile of different Brassica species is well established. Here, we review the significance of phenolic compounds as a source of beneficial compounds for human health and the influence of environmental conditions and processing mechanisms on the phenolic composition of Brassica vegetables.

  8. Detection of chlorinated aromatic compounds

    DOEpatents

    Ekechukwu, Amy A.

    1996-01-01

    A method for making a composition for measuring the concentration of chloated aromatic compounds in aqueous fluids, and an optical probe for use with the method. The composition comprises a hydrophobic polymer matrix, preferably polyamide, with a fluorescent indicator uniformly dispersed therein. The indicator fluoresces in the presence of the chlorinated aromatic compounds with an intensity dependent on the concentration of these compounds in the fluid of interest, such as 8-amino-2-naphthalene sulfonate. The probe includes a hollow cylindrical housing that contains the composition in its distal end. The probe admits an aqueous fluid to the probe interior for exposure to the composition. An optical fiber transmits excitation light from a remote source to the composition while the indicator reacts with chlorinated aromatic compounds present in the fluid. The resulting fluorescence light signal is reflected to a second optical fiber that transmits the light to a spectrophotometer for analysis.

  9. Detection of chlorinated aromatic compounds

    DOEpatents

    Ekechukwu, A.A.

    1996-02-06

    A method for making a composition for measuring the concentration of chlorinated aromatic compounds in aqueous fluids, and an optical probe for use with the method are disclosed. The composition comprises a hydrophobic polymer matrix, preferably polyamide, with a fluorescent indicator uniformly dispersed therein. The indicator fluoresces in the presence of the chlorinated aromatic compounds with an intensity dependent on the concentration of these compounds in the fluid of interest, such as 8-amino-2-naphthalene sulfonate. The probe includes a hollow cylindrical housing that contains the composition in its distal end. The probe admits an aqueous fluid to the probe interior for exposure to the composition. An optical fiber transmits excitation light from a remote source to the composition while the indicator reacts with chlorinated aromatic compounds present in the fluid. The resulting fluorescence light signal is reflected to a second optical fiber that transmits the light to a spectrophotometer for analysis. 5 figs.

  10. Crystallographic properties of fertilizer compounds

    SciTech Connect

    Frazier, A.W.; Dillard, E.F.; Thrasher, R.D.; Waerstad, K.R.; Hunter, S.R.; Kohler, J.J.; Scheib, R.M.

    1991-02-01

    This bulletin is a compilation of crystallographic data collected at NFERC on 450 fertilizer-related compounds. In TVA's fertilizer R and D program, petrographic examination, XRD, and infrared spectroscopy are combined with conventional chemical analysis methods in identifying the individual compounds that occur in fertilizer materials. This handbook brings together the results of these characterization studies and supplemental crystallographic data from the literature. It is in one-compound-per-page, loose-leaf format, ordered alphabetically by IUPAC name. Indexes provided include IUPAC name, formula, group, alternate formula, synonyms, x-ray data, optical data. Tables are given for solids, compounds in commercial MAP and DAP, and matrix materials in phosphate rock.

  11. Crystallographic properties of fertilizer compounds

    SciTech Connect

    Frazier, A.W.; Dillard, E.F.; Thrasher, R.D.; Waerstad, K.R.; Hunter, S.R.; Kohler, J.J.; Scheib, R.M.

    1991-02-01

    This bulletin is a compilation of crystallographic data collected at NFERC on 450 fertilizer-related compounds. In TVA`s fertilizer R and D program, petrographic examination, XRD, and infrared spectroscopy are combined with conventional chemical analysis methods in identifying the individual compounds that occur in fertilizer materials. This handbook brings together the results of these characterization studies and supplemental crystallographic data from the literature. It is in one-compound-per-page, loose-leaf format, ordered alphabetically by IUPAC name. Indexes provided include IUPAC name, formula, group, alternate formula, synonyms, x-ray data, optical data. Tables are given for solids, compounds in commercial MAP and DAP, and matrix materials in phosphate rock.

  12. Extemporaneous compounding of medicated ointments.

    PubMed

    Nagel, Karen; Ali, Fatima; Al-Khudari, Sarah; Khan, Ayesha; Patel, Khushbu; Patel, Nikunj; Desai, Archana

    2010-01-01

    Topical preparations represent a large percentage of compounded prescriptions, particularly in the area of dermatology. Properties of ointment bases vary greatly, and active ingredients are frequently added as aqueous or alcoholic solutions. Currently, there are no quantitative guidelines stating the various water and alcohol absorption capacity of different bases. A short experiment was designed to quantitate the amount of water or alcohol that could be absorbed by a series of ointment bases of varying types. Our findings may be used to assist compounding pharmacists in deciding what base is most suitable to use when considering the amount of water, alcohol, or any similar solvent needed to compound the preparation. A general overview of issues related to topical medication compounding is also provided in this article.

  13. MECHANICAL BEHAVIOR OF INTERMETALLIC COMPOUNDS.

    DTIC Science & Technology

    AGING(MATERIALS), AGING(MATERIALS), INTERMETALLIC COMPOUNDS, VANADIUM ALLOYS, COBALT ALLOYS, NICKEL ALLOYS, MECHANICAL PROPERTIES, TEMPERATURE, TIME ... CRYSTAL STRUCTURE, MICROSTRUCTURE, HARDNESS, TRANSFORMATIONS, ELECTRICAL RESISTANCE, MEASUREMENT, MICROSCOPY, ALLOYS, METALLOGRAPHY, X RAY DIFFRACTION.

  14. Photochemical dimerization of organic compounds

    DOEpatents

    Crabtree, Robert H.; Brown, Stephen H.; Muedas, Cesar A.; Ferguson, Richard R.

    1992-01-01

    At least one of selectivity and reaction rate of photosensitized vapor phase dimerizations, including dehydrodimerizations, hydrodimerizations and cross-dimerizations of saturated and unsaturated organic compounds is improved by conducting the dimerization in the presence of hydrogen or nitrous oxide.

  15. Polishing compound for plastic surfaces

    DOEpatents

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  16. Enzymatic synthesis of organophosphorus compounds

    NASA Astrophysics Data System (ADS)

    Kolodiazhnyi, Oleg I.

    2011-09-01

    Data on biocatalytic methods for the preparation of chiral organophosphorus compounds are generalized and described systematically. Various examples of enzymatic and microbiological synthesis of hydroxyphosphonates, aminophosphonates, phosphinites, phosphine oxides and tertiary phosphines are discussed. The bibliography includes 154 references.

  17. Fourth symposium on macrocyclic compounds

    SciTech Connect

    Christensen, J. J.; Izatt, R. M.

    1980-01-01

    Both theoretical and experimental aspects of the properties and behavior of synthetic and naturally occurring macrocyclic compounds are covered in this symposium. This document contains abstracts of the papers. (DLC)

  18. THE FERROELECTRIC AND STRUCTURAL PROPERTIES OF HAFNIUM OXIDE COMPOUNDS,

    DTIC Science & Technology

    HAFNIUM COMPOUNDS, OXIDES), (* FERROELECTRICITY , HAFNIUM COMPOUNDS), (*CRYSTAL STRUCTURE, HAFNIUM COMPOUNDS), DIELECTRIC PROPERTIES, HYSTERESIS... FERROELECTRIC MATERIALS, SOLID SOLUTIONS, X RAY DIFFRACTION, CRYSTAL LATTICES, LOW TEMPERATURE, CALCIUM COMPOUNDS, STRONTIUM COMPOUNDS, LEAD COMPOUNDS, BARIUM COMPOUNDS

  19. Aza compounds as anion receptors

    DOEpatents

    Lee, Hung Sui; Yang, Xiao-Qing; McBreen, James

    1998-01-06

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of Li.sup.+ ion in alkali metal batteries.

  20. Aza compounds as anion receptors

    DOEpatents

    Lee, H.S.; Yang, X.Q.; McBreen, J.

    1998-01-06

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of Li{sup +} ion in alkali metal batteries. 3 figs.

  1. The Multilinear Compound Gaussian Distribution

    DTIC Science & Technology

    2012-05-01

    which we call the Multilinear Compound Gaussian (MCG) distribution, subsumes both GSM [1] and the previously developed MICA [3-4] distributions as...modeling various natural phenomena of interest. Index Terms— GSM, MICA , MCG, Bayesian, Nonlinear I. INTRODUCTION The compound Gaussian (CG) model—also...We will see how the MCG model developed subsumes both CG and the previously developed multilinear ICA ( MICA ) distribution [3-4] as complementary

  2. Two compounds from Peucedanum dissolutum.

    PubMed

    Wu, Xian-Li; Li, Yi; Kong, Ling-Yi; Min, Zhi-Da

    2004-12-01

    A new compound, 3'(R)-O-beta-D-glucopyranosyl-3',4'-dihydroxanthyletin (1), and a known compound, prim-O-glucosylcimifugin (2), were isolated from the roots of Peucedanum dissolutum. The structure of 1 was elucidated by spectral evidence and chemical reaction. The NMR signals of carbons and protons of 2 were assigned for the first time by analysis of (1)H-(1)H COSY, HMQC and HMBC spectra.

  3. Compound Walls For Vacuum Chambers

    NASA Technical Reports Server (NTRS)

    Frazer, Robert E.

    1988-01-01

    Proposed compound-wall configuration enables construction of large high-vacuum chambers without having to use thick layers of expensive material to obtain necessary strength. Walls enclose chambers more than 1 m in diameter and several kilometers long. Compound wall made of strong outer layer of structural-steel culvert pipe welded to thin layer of high-quality, low-outgassing stainless steel.

  4. Miniature curved artificial compound eyes.

    PubMed

    Floreano, Dario; Pericet-Camara, Ramon; Viollet, Stéphane; Ruffier, Franck; Brückner, Andreas; Leitel, Robert; Buss, Wolfgang; Menouni, Mohsine; Expert, Fabien; Juston, Raphaël; Dobrzynski, Michal Karol; L'Eplattenier, Geraud; Recktenwald, Fabian; Mallot, Hanspeter A; Franceschini, Nicolas

    2013-06-04

    In most animal species, vision is mediated by compound eyes, which offer lower resolution than vertebrate single-lens eyes, but significantly larger fields of view with negligible distortion and spherical aberration, as well as high temporal resolution in a tiny package. Compound eyes are ideally suited for fast panoramic motion perception. Engineering a miniature artificial compound eye is challenging because it requires accurate alignment of photoreceptive and optical components on a curved surface. Here, we describe a unique design method for biomimetic compound eyes featuring a panoramic, undistorted field of view in a very thin package. The design consists of three planar layers of separately produced arrays, namely, a microlens array, a neuromorphic photodetector array, and a flexible printed circuit board that are stacked, cut, and curved to produce a mechanically flexible imager. Following this method, we have prototyped and characterized an artificial compound eye bearing a hemispherical field of view with embedded and programmable low-power signal processing, high temporal resolution, and local adaptation to illumination. The prototyped artificial compound eye possesses several characteristics similar to the eye of the fruit fly Drosophila and other arthropod species. This design method opens up additional vistas for a broad range of applications in which wide field motion detection is at a premium, such as collision-free navigation of terrestrial and aerospace vehicles, and for the experimental testing of insect vision theories.

  5. Bioaccessibility testing of cobalt compounds.

    PubMed

    Stopford, Woodhall; Turner, John; Cappellini, Danielle; Brock, Tom

    2003-08-01

    Testing of metal compounds for solubility in artificial fluids has been used for many years to assist determining human health risk from exposure to specific compounds of concern. In lieu of obtaining bioavailability data from samples of urine, blood, or other tissues, these studies measured solubility of compounds in various artificial fluids as a surrogate for bioavailability. In this context, the measurement of metal "bioaccessibility" can be used as an in vitro substitute for measuring metal bioavailability. Bioaccessibility can be defined as a value representing the availability of metal for absorption when dissolved in in vitro surrogates of body fluids or juices. The aim of this study was to measure and compare the bioaccessibility of selected cobalt compounds in artificial human tissue fluids and human serum. A second aim was to initiate studies to experimentally validate an in vitro methodology that would provide a conservative estimate of cobalt bioavailability in the assessment of dose from human exposure to various species of cobalt compounds. This study evaluated the bioaccessibility of cobalt(II) from 11 selected cobalt compounds and an alloy in 2 physical forms in 5 surrogate human tissue fluids and human serum. Four (4) separate extraction times were used up to 72 hours. The effect of variables such as pH, dissolution time, and mass-ion effect on cobalt bioaccessibility were assessed as well. We found that the species of cobalt compound as well as the physico-chemical properties of the surrogate fluids, especially pH, had a major impact on cobalt solubility. Cobalt salts such as cobalt(II) sulfate heptahydrate were highly soluble, whereas cobalt alloys used in medical implants and cobalt aluminate spinels used as pigments, showed minimal dissolution over the period of the assay.

  6. Host compounds for red phosphorescent OLEDs

    DOEpatents

    Xia, Chuanjun; Cheon, Kwang -Ohk

    2015-08-25

    Novel compounds containing a triphenylene moiety linked to an .alpha..beta. connected binaphthyl ring system are provided. These compounds have surprisingly good solubility in organic solvents and are useful as host compounds in red phosphorescent OLEDs.

  7. Method for purifying bidentate organophosphorus compounds

    DOEpatents

    Schulz, Wallace W.

    1977-01-01

    Bidentate organophosphorus compounds useful for extracting actinide elements from acidic nuclear waste solutions are purified of undesirable acidic impurities by contacting the compounds with ethylene glycol which preferentially extracts the impurities found in technical grade bidentate compounds.

  8. Extraterrestrial Organic Compounds in Meteorites

    NASA Technical Reports Server (NTRS)

    Botta, Oliver; Bada, Jeffrey L.; Meyer, Michael (Technical Monitor)

    2003-01-01

    Many organic compounds or their precursors found in meteorites originated in the interstellar or circumstellar medium and were later incorporated into planetesimals during the formation of the solar system. There they either survived intact or underwent further processing to synthesize secondary products on the meteorite parent body. The most distinct feature of CI and CM carbonaceous chondrites, two types of stony meteorites, is their high carbon content (up to 3% of weight), either in the form of carbonates or of organic compounds. The bulk of the organic carbon consists of an insoluble macromolecular material with a complex structure. Also present is a soluble organic fraction, which has been analyzed by several separation and analytical procedures. Low detection limits can be achieved by derivatization of the organic molecules with reagents that allow for analysis by gas chromatography/mass spectroscopy and high performance liquid chromatography. The CM meteorite Murchison has been found to contain more than 70 extraterrestrial amino acids and several other classes of compounds including carboxylic acids, hydroxy carboxylic acids, sulphonic and phosphonic acids, aliphatic, aromatic and polar hydrocarbons, fullerenes, heterocycles as well as carbonyl compounds, alcohols, amines and amides. The organic matter was found to be enriched in deuterium, and distinct organic compounds show isotopic enrichments of carbon and nitrogen relative to terrestrial matter.

  9. Extraterrestrial Organic Compounds in Meteorites

    NASA Technical Reports Server (NTRS)

    Botta, Oliver; Bada, Jeffrey L.; Meyer, Michael (Technical Monitor)

    2003-01-01

    Many organic compounds or their precursors found in meteorites originated in the interstellar or circumstellar medium and were later incorporated into planetesimals during the formation of the solar system. There they either survived intact or underwent further processing to synthesize secondary products on the meteorite parent body. The most distinct feature of CI and CM carbonaceous chondrites, two types of stony meteorites, is their high carbon content (up to 3% of weight), either in the form of carbonates or of organic compounds. The bulk of the organic carbon consists of an insoluble macromolecular material with a complex structure. Also present is a soluble organic fraction, which has been analyzed by several separation and analytical procedures. Low detection limits can be achieved by derivatization of the organic molecules with reagents that allow for analysis by gas chromatography/mass spectroscopy and high performance liquid chromatography. The CM meteorite Murchison has been found to contain more than 70 extraterrestrial amino acids and several other classes of compounds including carboxylic acids, hydroxy carboxylic acids, sulphonic and phosphonic acids, aliphatic, aromatic and polar hydrocarbons, fullerenes, heterocycles as well as carbonyl compounds, alcohols, amines and amides. The organic matter was found to be enriched in deuterium, and distinct organic compounds show isotopic enrichments of carbon and nitrogen relative to terrestrial matter.

  10. Blue Photoluminescence From Silacyclobutene Compounds

    NASA Astrophysics Data System (ADS)

    Pernisz, Udo

    1999-04-01

    Organosilicon compounds in which the Si atom is bound to an aromatic moiety such as a phenyl group, exhibit strong blue photoluminescence when excited with UV light (for example at a wavelength of 337 nm). This phenomenon was investigated quantitatively at room temperature and at the temperature of liquid nitrogen (78 K) by measuring the emission and excitation spectra of the total luminescence, and of the phosphorescence, for a silacyclobutene compound in which two phenyl groups are joined across the C=C double bond of the ring. The effect of a series of organic substituents on the Si atom was investigated as well as the time dependence of the phosphorescence intensity decay for this class of materials. A tentative model of the energy levels in this compound is proposed. The observation of visible blue emission -- in contrast to photoluminescence in the UV from the aromatic groups -- is explained by the Si-C bond lowering the energy of the molecular orbitals, an effect that is currently under study for a range of Si-containing compounds. Synthesis of the silacyclobutene compounds was performed at the laboratory of Prof. N. Auner, now at J.W. Goethe Universität, Frankfurt, Germany. His contributions, and those of his collaborators, to the work reported here are gratefully acknowledged.

  11. Cytotoxic Compounds from Brucea mollis

    PubMed Central

    Tung, Mai Hung Thanh; Đuc, Ho Viet; Huong, Tran Thu; Duong, Nguyen Thanh; Phuong, Do Thi; Thao, Do Thi; Tai, Bui Huu; Kim, Young Ho; Bach, Tran The; Cuong, Nguyen Manh

    2013-01-01

    Ten compounds, including soulameanone (1), isobruceine B (2), 9-methoxy-canthin-6-one (3), bruceolline F (4), niloticine (5), octatriacontan-1-ol (6), bombiprenone (7), α-tocopherol (8), inosine (9), and apigenin 7-O-β-D-glucopyranoside (10), were isolated from the leaves, stems, and roots of Brucea mollis Wall. ex Kurz. Their structures were determined using one-and two-dimensional NMR spectroscopy and mass spectrometry. All compounds were evaluated for their cytotoxic activity against KB (human carcinoma of the mouth), LU-1 (human lung adenocarcinoma), LNCaP (human prostate adeno-carcinoma), and HL-60 (human promyelocytic leukemia) cancer cell lines. Compound 2 showed significant cytotoxic activity against KB, LU-1, LNCaP, and HL-60 cancer cells with IC50 values of 0.39, 0.40, 0.34, and 0.23 μg/mL, respectively. In addition, compounds 3 and 5 showed significant cytotoxic activity against KB, LU-1, LNCaP, and HL-60 cancer cells with IC50 values around 1–4 μg/mL. Compounds 9-methoxycanthin-6-one (3) and niloticine (5) have been discovered for the first time from the Brucea genus. PMID:24106661

  12. Antitumor Compounds from Marine Actinomycetes

    PubMed Central

    Olano, Carlos; Méndez, Carmen; Salas, José A.

    2009-01-01

    Chemotherapy is one of the main treatments used to combat cancer. A great number of antitumor compounds are natural products or their derivatives, mainly produced by microorganisms. In particular, actinomycetes are the producers of a large number of natural products with different biological activities, including antitumor properties. These antitumor compounds belong to several structural classes such as anthracyclines, enediynes, indolocarbazoles, isoprenoides, macrolides, non-ribosomal peptides and others, and they exert antitumor activity by inducing apoptosis through DNA cleavage mediated by topoisomerase I or II inhibition, mitochondria permeabilization, inhibition of key enzymes involved in signal transduction like proteases, or cellular metabolism and in some cases by inhibiting tumor-induced angiogenesis. Marine organisms have attracted special attention in the last years for their ability to produce interesting pharmacological lead compounds. PMID:19597582

  13. Gallium-containing anticancer compounds

    PubMed Central

    Chitambar, Christopher R

    2013-01-01

    There is an ever pressing need to develop new drugs for the treatment of cancer. Gallium nitrate, a group IIIa metal salt, inhibits the proliferation of tumor cells in vitro and in vivo and has shown activity against non-Hodgkin’s lymphoma and bladder cancer in clinical trials. Gallium can function as an iron mimetic and perturb iron-dependent proliferation and other iron-related processes in tumor cells. Gallium nitrate lacks cross resistance with conventional chemotherapeutic drugs and is not myelosuppressive; it can be used when other drugs have failed or when the blood count is low. Given the therapeutic potential of gallium, newer generations of gallium compounds are now in various phases of preclinical and clinical development. These compounds hold the promise of greater anti-tumor activity against a broader spectrum of cancers. The development of gallium compounds for cancer treatment and their mechanisms of action will be discussed. PMID:22800370

  14. Gallium-containing anticancer compounds.

    PubMed

    Chitambar, Christopher R

    2012-06-01

    There is an ever pressing need to develop new drugs for the treatment of cancer. Gallium nitrate, a group IIIa metal salt, inhibits the proliferation of tumor cells in vitro and in vivo and has shown activity against non-Hodgkin's lymphoma and bladder cancer in clinical trials. Gallium can function as an iron mimetic and perturb iron-dependent proliferation and other iron-related processes in tumor cells. Gallium nitrate lacks crossresistance with conventional chemotherapeutic drugs and is not myelosuppressive; it can be used when other drugs have failed or when the blood count is low. Given the therapeutic potential of gallium, newer generations of gallium compounds are now in various phases of preclinical and clinical development. These compounds hold the promise of greater anti-tumor activity against a broader spectrum of cancers. The development of gallium compounds for cancer treatment and their mechanisms of action will be discussed.

  15. Volatile compounds from Melicope obscura.

    PubMed

    Smadja, Jacqueline; Strasberg, Dominique; Legoff, Géraldine; Gauvin-Bialecki, Anne

    2010-02-01

    To evaluate the interpopulation variability of volatile compounds in Melicope obscura, four samples representing four populations were collected all over the distribution area of the species in Reunion Island (Indian Ocean). The samples were extracted by hydrodistillation, and analyzed using GC/FID and GC/MS techniques. The study revealed that, in the four essential oils obtained, oxygenated sesquiterpenes were one of the major chemical classes (9.2-35.2%), mainly consisting of a new compound, (+)-6-ethenyl-2-hydroxy-6,10-dimethylundeca-2,9-dien-4-one (1), called melicopenol (8.6-30.1%). The compound was isolated by column chromatography and identified by spectral analyses including 1D- and 2D-NMR.

  16. Biodegradation of halogenated organic compounds.

    PubMed Central

    Chaudhry, G R; Chapalamadugu, S

    1991-01-01

    In this review we discuss the degradation of chlorinated hydrocarbons by microorganisms, emphasizing the physiological, biochemical, and genetic basis of the biodegradation of aliphatic, aromatic, and polycyclic compounds. Many environmentally important xenobiotics are halogenated, especially chlorinated. These compounds are manufactured and used as pesticides, plasticizers, paint and printing-ink components, adhesives, flame retardants, hydraulic and heat transfer fluids, refrigerants, solvents, additives for cutting oils, and textile auxiliaries. The hazardous chemicals enter the environment through production, commercial application, and waste. As a result of bioaccumulation in the food chain and groundwater contamination, they pose public health problems because many of them are toxic, mutagenic, or carcinogenic. Although synthetic chemicals are usually recalcitrant to biodegradation, microorganisms have evolved an extensive range of enzymes, pathways, and control mechanisms that are responsible for catabolism of a wide variety of such compounds. Thus, such biological degradation can be exploited to alleviate environmental pollution problems. The pathways by which a given compound is degraded are determined by the physical, chemical, and microbiological aspects of a particular environment. By understanding the genetic basis of catabolism of xenobiotics, it is possible to improve the efficacy of naturally occurring microorganisms or construct new microorganisms capable of degrading pollutants in soil and aquatic environments more efficiently. Recently a number of genes whose enzyme products have a broader substrate specificity for the degradation of aromatic compounds have been cloned and attempts have been made to construct gene cassettes or synthetic operons comprising these degradative genes. Such gene cassettes or operons can be transferred into suitable microbial hosts for extending and custom designing the pathways for rapid degradation of recalcitrant

  17. Hydrophobic Compounds Reshape Membrane Domains

    PubMed Central

    Barnoud, Jonathan; Rossi, Giulia; Marrink, Siewert J.; Monticelli, Luca

    2014-01-01

    Cell membranes have a complex lateral organization featuring domains with distinct composition, also known as rafts, which play an essential role in cellular processes such as signal transduction and protein trafficking. In vivo, perturbations of membrane domains (e.g., by drugs or lipophilic compounds) have major effects on the activity of raft-associated proteins and on signaling pathways, but they are difficult to characterize because of the small size of the domains, typically below optical resolution. Model membranes, instead, can show macroscopic phase separation between liquid-ordered and liquid-disordered domains, and they are often used to investigate the driving forces of membrane lateral organization. Studies in model membranes have shown that some lipophilic compounds perturb membrane domains, but it is not clear which chemical and physical properties determine domain perturbation. The mechanisms of domain stabilization and destabilization are also unknown. Here we describe the effect of six simple hydrophobic compounds on the lateral organization of phase-separated model membranes consisting of saturated and unsaturated phospholipids and cholesterol. Using molecular simulations, we identify two groups of molecules with distinct behavior: aliphatic compounds promote lipid mixing by distributing at the interface between liquid-ordered and liquid-disordered domains; aromatic compounds, instead, stabilize phase separation by partitioning into liquid-disordered domains and excluding cholesterol from the disordered domains. We predict that relatively small concentrations of hydrophobic species can have a broad impact on domain stability in model systems, which suggests possible mechanisms of action for hydrophobic compounds in vivo. PMID:25299598

  18. Organosulfur compounds and cardiovascular disease.

    PubMed

    Vazquez-Prieto, Marcela A; Miatello, Roberto M

    2010-12-01

    Epidemiological studies have shown an inverse relationship between consumption of fruits and vegetables and the risk of cardiovascular disease. Phytochemicals are non-nutritional chemical compounds found in small quantities in fruits and vegetables with known health benefits. Among them, organosulfides are present mainly in garlic and onion characterized by their antioxidant and anti-inflammatory properties, and isothiocyanates in cruciferous vegetables have anticarcinogenic effects in experimental models. In this review, we are focusing on the main biological studies regarding the beneficial effect of organosulfur compounds on their protection against cardiovascular disease.

  19. Electronic Configuration of Yb Compounds

    SciTech Connect

    Temmerman, W.M.; Szotek, Z.; Svane, A.; Strange, P.; Winter, H.; Delin, A.; Johansson, B.; Eriksson, O.; Fast, L.; Wills, J.M.

    1999-11-01

    The total energy differences between divalent and trivalent configurations of Yb ions in a number of Yb compounds are studied. Two different band theoretical methods, which differ in the treatment of the localized f electrons, are used. The results show that in all Yb compounds the valence energy differences are equal to the energy needed to localize an f electron. These valence energy differences correlate with the number of f electrons hybridizing with the conduction bands in the trivalent configuration. For divalent YbS, the pressure induced f -electron delocalization implies an intermediate valency, as also indicated by experiment. {copyright} {ital 1999} {ital The American Physical Society }

  20. Basics of compounding with tars.

    PubMed

    Allen, Loyd V

    2013-01-01

    Tar has been used throughout history for numerous purposes; from sealing the hulls of ships to sealing roofs of dwellings and even for medical purposes. Produced by destructive distillation, commonly used tars are prepared from coal and wood. Coal tar, juniper tar, and pine tar are used for various medical purposes as described in the article. Also presented are the various characteristics and uses of each tar, along with commercial products and numerous compounding formulas. Techniques used to compound with tars are also presented.

  1. Pentafluorosulfur Compounds for Naval Materials.

    DTIC Science & Technology

    1982-01-01

    Compounds The sulfamide , (t-BuNH) 2S02 , turned out to be a rich source of novel sulfur- nitrogen heterocycles. For example, treatment of (t-BuNH) 2 so2 with...planar and tetrahedral, and (b) the sulfamide adopts an anti(C2 ) conformation rather than the cis(Cs) conformation presumably due to minimization of

  2. Halogenated Compounds from Marine Algae

    PubMed Central

    Cabrita, Maria Teresa; Vale, Carlos; Rauter, Amélia Pilar

    2010-01-01

    Marine algae produce a cocktail of halogenated metabolites with potential commercial value. Structures exhibited by these compounds go from acyclic entities with a linear chain to complex polycyclic molecules. Their medical and pharmaceutical application has been investigated for a few decades, however other properties, such as antifouling, are not to be discarded. Many compounds were discovered in the last years, although the need for new drugs keeps this field open as many algal species are poorly screened. The ecological role of marine algal halogenated metabolites has somehow been overlooked. This new research field will provide valuable and novel insight into the marine ecosystem dynamics as well as a new approach to comprehending biodiversity. Furthermore, understanding interactions between halogenated compound production by algae and the environment, including anthropogenic or global climate changes, is a challenging target for the coming years. Research of halogenated metabolites has been more focused on macroalgae than on phytoplankton. However, phytoplankton could be a very promising material since it is the base of the marine food chain with quick adaptation to environmental changes, which undoubtedly has consequences on secondary metabolism. This paper reviews recent progress on this field and presents trends on the role of marine algae as producers of halogenated compounds. PMID:20948909

  3. Polymeric nanocomposites: compounding and performance.

    PubMed

    Utracki, L A

    2008-04-01

    Polymeric nanocomposites (PNC) are binary mixtures of strongly interacting, inorganic platelets dispersed in a polymeric matrix. For full exfoliation, the thermodynamic miscibility is required. There are three basic methods of organically-modified clay dispersion that might result in PNC: (1) in polymer solution (followed by solvent removal), (2) in a monomer (followed by polymerization), and (3) in molten polymer (compounding). Most commercial PNC are produced by the second method, but it is the third one that has the greatest promise for the plastics industry. Similarly as during the manufacture of polymer blends, the layered silicates must be compatibilized by intercalation with organic salts and/or addition of functionalized macromolecules. Compounding affects the kinetics of dispersion process, but rarely the miscibility. Melt compounding is carried out either in a single-screw (SSE) or a twin-screw extruder (TSE). Furthermore, an extensional flow mixer (EFM) might be attached to an extruder. Two versions of EFM were evaluated: (1) designed for polymer homogenization and blending, and (2) designed for dispersing nano-particles. In this review, the dispersion of organoclay in polystyrene (PS), polyamide-6 (PA-6) or in polypropylene (PP) is discussed. The PNC based on PS or PA-6 contained two components (polymer and organoclay), whereas those based on PP in addition had a compatibilizer mixture of two maleated polypropylenes. Better dispersion was found compounding PNC's in a SSE + EFM than in TSE with or without EFM. The mechanical performance (tensile, flexural and impact) was examined.

  4. Infrared Spectroscopy of Deuterated Compounds.

    ERIC Educational Resources Information Center

    MacCarthy, Patrick

    1985-01-01

    Background information, procedures used, and typical results obtained are provided for an experiment (based on the potassium bromide pressed-pellet method) involving the infrared spectroscopy of deuterated compounds. Deuteration refers to deuterium-hydrogen exchange at active hydrogen sites in the molecule. (JN)

  5. The Compound Atwood Machine Problem

    ERIC Educational Resources Information Center

    Coelho, R. Lopes

    2017-01-01

    The present paper accounts for progress in physics teaching in the sense that a problem, which has been closed to students for being too difficult, is gained for the high school curriculum. This problem is the compound Atwood machine with three bodies. Its introduction into high school classes is based on a recent study on the weighing of an…

  6. Compound Cuing in Free Recall

    ERIC Educational Resources Information Center

    Lohnas, Lynn J.; Kahana, Michael J.

    2014-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cuing in free recall. Specifically, the temporal contiguity…

  7. Theory of Compound Liquid Drops

    NASA Technical Reports Server (NTRS)

    Saffren, M. M.; Elleman, D. D.; Rhim, W. K.

    1983-01-01

    Dynamic behavior is analyzed for drop within drop within infinite fluid. Report gives theoretical basis for understanding behavior of compound drops. Aids in planning and interpreting experiments in laboratory, spacecraft, and research aircraft. Provides insight into fabrication of target pellets for nuclear fusion.

  8. Compound Cuing in Free Recall

    ERIC Educational Resources Information Center

    Lohnas, Lynn J.; Kahana, Michael J.

    2014-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cuing in free recall. Specifically, the temporal contiguity…

  9. Infrared Spectroscopy of Deuterated Compounds.

    ERIC Educational Resources Information Center

    MacCarthy, Patrick

    1985-01-01

    Background information, procedures used, and typical results obtained are provided for an experiment (based on the potassium bromide pressed-pellet method) involving the infrared spectroscopy of deuterated compounds. Deuteration refers to deuterium-hydrogen exchange at active hydrogen sites in the molecule. (JN)

  10. Cerium Oxide and Cerium Compounds

    Integrated Risk Information System (IRIS)

    EPA / 635 / R - 08 / 002F www.epa.gov / iris TOXICOLOGICAL REVIEW OF Cerium Oxide and Cerium Compounds ( CAS No . 1306 - 38 - 3 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) September 2009 U.S . Environmental Protection Agency Washington , DC ii DISCLAIMER Th

  11. Students' Categorizations of Organic Compounds

    ERIC Educational Resources Information Center

    Domin, Daniel S.; Al-Masum, Mohammad; Mensah, John

    2008-01-01

    Categorization is a fundamental psychological ability necessary for problem solving and many other higher-level cognitive tasks. In organic chemistry, students must establish groupings of different chemical compounds in order not only to solve problems, but also to understand course content. Classic models of categorization emphasize similarity as…

  12. Antifouling Compounds from Marine Macroalgae.

    PubMed

    Dahms, Hans Uwe; Dobretsov, Sergey

    2017-08-28

    Marine macroalgae produce a wide variety of biologically-active metabolites that have been developed into commercial products, such as antibiotics, immunosuppressive, anti-inflammatory, cytotoxic agents, and cosmetic products. Many marine algae remain clean over longer periods of time, suggesting their strong antifouling potential. Isolation of biogenic compounds and the determination of their structure could provide leads for the development of environmentally-friendly antifouling paints. Isolated substances with potent antifouling activity belong to fatty acids, lipopeptides, amides, alkaloids, lactones, steroids, terpenoids, and pyrroles. It is unclear as yet to what extent symbiotic microorganisms are involved in the synthesis of these compounds. Algal secondary metabolites have the potential to be produced commercially using genetic and metabolic engineering techniques. This review provides an overview of publications from 2010 to February 2017 about antifouling activity of green, brown, and red algae. Some researchers were focusing on antifouling compounds of brown macroalgae, while metabolites of green algae received less attention. Several studies tested antifouling activity against bacteria, microalgae and invertebrates, but in only a few studies was the quorum sensing inhibitory activity of marine macroalgae tested. Rarely, antifouling compounds from macroalgae were isolated and tested in an ecologically-relevant way.

  13. Making Models of Chemical Compounds.

    ERIC Educational Resources Information Center

    Hoehn, Robert G.

    1992-01-01

    Describes the benefits and techniques of having students create models of chemical compounds. This hands-on approach uses colored paper and other inexpensive materials to construct the models. A step-by-step approach provides objectives, materials, an explanation on how to calculate chemical ratios, procedures, follow-up activities, and a resource…

  14. Halogenated compounds from marine algae.

    PubMed

    Cabrita, Maria Teresa; Vale, Carlos; Rauter, Amélia Pilar

    2010-08-09

    Marine algae produce a cocktail of halogenated metabolites with potential commercial value. Structures exhibited by these compounds go from acyclic entities with a linear chain to complex polycyclic molecules. Their medical and pharmaceutical application has been investigated for a few decades, however other properties, such as antifouling, are not to be discarded. Many compounds were discovered in the last years, although the need for new drugs keeps this field open as many algal species are poorly screened. The ecological role of marine algal halogenated metabolites has somehow been overlooked. This new research field will provide valuable and novel insight into the marine ecosystem dynamics as well as a new approach to comprehending biodiversity. Furthermore, understanding interactions between halogenated compound production by algae and the environment, including anthropogenic or global climate changes, is a challenging target for the coming years. Research of halogenated metabolites has been more focused on macroalgae than on phytoplankton. However, phytoplankton could be a very promising material since it is the base of the marine food chain with quick adaptation to environmental changes, which undoubtedly has consequences on secondary metabolism. This paper reviews recent progress on this field and presents trends on the role of marine algae as producers of halogenated compounds.

  15. The compound Atwood machine problem

    NASA Astrophysics Data System (ADS)

    Lopes Coelho, R.

    2017-05-01

    The present paper accounts for progress in physics teaching in the sense that a problem, which has been closed to students for being too difficult, is gained for the high school curriculum. This problem is the compound Atwood machine with three bodies. Its introduction into high school classes is based on a recent study on the weighing of an Atwood machine.

  16. Compounding errors in 2 dogs receiving anticonvulsants.

    PubMed

    McConkey, Sandra E; Walker, Susan; Adams, Cathy

    2012-04-01

    Two cases that involve drug compounding errors are described. One dog exhibited increased seizure activity due to a compounded, flavored phenobarbital solution that deteriorated before the expiration date provided by the compounder. The other dog developed clinical signs of hyperkalemia and bromine toxicity following a 5-fold compounding error in the concentration of potassium bromide (KBr).

  17. Large Constituent Families Help Children Parse Compounds

    ERIC Educational Resources Information Center

    Krott, Andrea; Nicoladis, Elena

    2005-01-01

    The family size of the constituents of compound words, or the number of compounds sharing the constituents, has been shown to affect adults' access to compound words in the mental lexicon. The present study was designed to see if family size would affect children's segmentation of compounds. Twenty-five English-speaking children between 3;7 and…

  18. Bacterial Degradation of Aromatic Compounds

    PubMed Central

    Seo, Jong-Su; Keum, Young-Soo; Li, Qing X.

    2009-01-01

    Aromatic compounds are among the most prevalent and persistent pollutants in the environment. Petroleum-contaminated soil and sediment commonly contain a mixture of polycyclic aromatic hydrocarbons (PAHs) and heterocyclic aromatics. Aromatics derived from industrial activities often have functional groups such as alkyls, halogens and nitro groups. Biodegradation is a major mechanism of removal of organic pollutants from a contaminated site. This review focuses on bacterial degradation pathways of selected aromatic compounds. Catabolic pathways of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, and benzo[a]pyrene are described in detail. Bacterial catabolism of the heterocycles dibenzofuran, carbazole, dibenzothiophene, and dibenzodioxin is discussed. Bacterial catabolism of alkylated PAHs is summarized, followed by a brief discussion of proteomics and metabolomics as powerful tools for elucidation of biodegradation mechanisms. PMID:19440284

  19. Superconductivity in graphite intercalation compounds

    DOE PAGES

    Smith, Robert P.; Weller, Thomas E.; Howard, Christopher A.; ...

    2015-02-26

    This study examines the field of superconductivity in the class of materials known as graphite intercalation compounds which has a history dating back to the 1960s. This paper recontextualizes the field in light of the discovery of superconductivity in CaC₆ and YbC₆ in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how this relates to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic statesmore » and phonon modes are most important for superconductivity and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.« less

  20. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  1. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1994-06-14

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  2. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-09-07

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 figures.

  3. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.

    1989-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  4. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.

    1989-07-18

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  5. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1994-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  6. Superconductivity in graphite intercalation compounds

    NASA Astrophysics Data System (ADS)

    Smith, Robert P.; Weller, Thomas E.; Howard, Christopher A.; Dean, Mark P. M.; Rahnejat, Kaveh C.; Saxena, Siddharth S.; Ellerby, Mark

    2015-07-01

    The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC6 and YbC6 in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.

  7. Superconductivity in graphite intercalation compounds

    SciTech Connect

    Smith, Robert P.; Weller, Thomas E.; Howard, Christopher A.; Dean, Mark P. M.; Rahnejat, Kaveh C.; Saxena, Siddharth S.; Ellerby, Mark

    2015-02-26

    This study examines the field of superconductivity in the class of materials known as graphite intercalation compounds which has a history dating back to the 1960s. This paper recontextualizes the field in light of the discovery of superconductivity in CaC₆ and YbC₆ in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how this relates to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.

  8. Quantitative analysis of endogenous compounds.

    PubMed

    Thakare, Rhishikesh; Chhonker, Yashpal S; Gautam, Nagsen; Alamoudi, Jawaher Abdullah; Alnouti, Yazen

    2016-09-05

    Accurate quantitative analysis of endogenous analytes is essential for several clinical and non-clinical applications. LC-MS/MS is the technique of choice for quantitative analyses. Absolute quantification by LC/MS requires preparing standard curves in the same matrix as the study samples so that the matrix effect and the extraction efficiency for analytes are the same in both the standard and study samples. However, by definition, analyte-free biological matrices do not exist for endogenous compounds. To address the lack of blank matrices for the quantification of endogenous compounds by LC-MS/MS, four approaches are used including the standard addition, the background subtraction, the surrogate matrix, and the surrogate analyte methods. This review article presents an overview these approaches, cite and summarize their applications, and compare their advantages and disadvantages. In addition, we discuss in details, validation requirements and compatibility with FDA guidelines to ensure method reliability in quantifying endogenous compounds. The standard addition, background subtraction, and the surrogate analyte approaches allow the use of the same matrix for the calibration curve as the one to be analyzed in the test samples. However, in the surrogate matrix approach, various matrices such as artificial, stripped, and neat matrices are used as surrogate matrices for the actual matrix of study samples. For the surrogate analyte approach, it is required to demonstrate similarity in matrix effect and recovery between surrogate and authentic endogenous analytes. Similarly, for the surrogate matrix approach, it is required to demonstrate similar matrix effect and extraction recovery in both the surrogate and original matrices. All these methods represent indirect approaches to quantify endogenous compounds and regardless of what approach is followed, it has to be shown that none of the validation criteria have been compromised due to the indirect analyses.

  9. Organophosphorus Compounds in Organic Electronics.

    PubMed

    Shameem, Muhammad Anwar; Orthaber, Andreas

    2016-07-25

    This Minireview describes recent advances of organophosphorus compounds as opto-electronic materials in the field of organic electronics. The progress of (hetero-) phospholes, unsaturated phosphanes, and trivalent and pentavalent phosphanes since 2010 is covered. The described applications of organophosphorus materials range from single molecule sensors, field effect transistors, organic light emitting diodes, to polymeric materials for organic photovoltaic applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Compound semiconductor optical waveguide switch

    DOEpatents

    Spahn, Olga B.; Sullivan, Charles T.; Garcia, Ernest J.

    2003-06-10

    An optical waveguide switch is disclosed which is formed from III-V compound semiconductors and which has a moveable optical waveguide with a cantilevered portion that can be bent laterally by an integral electrostatic actuator to route an optical signal (i.e. light) between the moveable optical waveguide and one of a plurality of fixed optical waveguides. A plurality of optical waveguide switches can be formed on a common substrate and interconnected to form an optical switching network.

  11. Triterpenes as potentially cytotoxic compounds.

    PubMed

    Chudzik, Malwina; Korzonek-Szlacheta, Ilona; Król, Wojciech

    2015-01-19

    Triterpenes are compounds of natural origin, which have numerously biological activities: anti-cancer properties, anti-inflammatory, anti-oxidative, anti-viral, anti-bacterial and anti-fungal. These substances can be isolated from plants, animals or fungi. Nowadays, when neoplasms are main cause of death, triterpenes can become an alternative method for treating cancer because of their cytotoxic properties and chemopreventive activities.

  12. Molybdenum compounds in organic synthesis

    NASA Astrophysics Data System (ADS)

    Khusnutdinov, R. I.; Oshnyakova, T. M.; Dzhemilev, U. M.

    2017-02-01

    The review presents the first analysis and systematic discussion of data published in the last 35–40 years on the use of molybdenum compounds and complexes in organic synthesis and catalysis of various ion coordination and radical reactions. Detailed account is given of the key trends in the use of molybdenum complexes as catalysts of alkene epoxidation and oxyketonation, oxidation of sulfur, nitrogen and phosphorus compounds, hydrosilylation of 1,3-dienes, ketones and aldehydes, hydrostannylation of acetylenes and hydrogermylation of norbornadienes. Considerable attention is paid to the description of new reactions and in situ generation of highly reactive hypohalites, ROX and HOX, induced by molybdenum complexes and the use of hypohalites in oxidative transformations. Data on the application of molybdenum complexes in well-known reactions are discussed, including Kharasch and Pauson–Khand reactions, allylic alkylation of C-nucleophiles, aminocarbonylation of halo derivatives and oligomerization of cyclic dienes, trienes, alkynes and 1,3-dienes. The last Section of the review considers 'unusual' organic reactions involving molybdenum compounds and complexes. The bibliography includes 257 references.

  13. Compound facial expressions of emotion

    PubMed Central

    Du, Shichuan; Tao, Yong; Martinez, Aleix M.

    2014-01-01

    Understanding the different categories of facial expressions of emotion regularly used by us is essential to gain insights into human cognition and affect as well as for the design of computational models and perceptual interfaces. Past research on facial expressions of emotion has focused on the study of six basic categories—happiness, surprise, anger, sadness, fear, and disgust. However, many more facial expressions of emotion exist and are used regularly by humans. This paper describes an important group of expressions, which we call compound emotion categories. Compound emotions are those that can be constructed by combining basic component categories to create new ones. For instance, happily surprised and angrily surprised are two distinct compound emotion categories. The present work defines 21 distinct emotion categories. Sample images of their facial expressions were collected from 230 human subjects. A Facial Action Coding System analysis shows the production of these 21 categories is different but consistent with the subordinate categories they represent (e.g., a happily surprised expression combines muscle movements observed in happiness and surprised). We show that these differences are sufficient to distinguish between the 21 defined categories. We then use a computational model of face perception to demonstrate that most of these categories are also visually discriminable from one another. PMID:24706770

  14. Neuroprotective compounds of Tilia amurensis

    PubMed Central

    Lee, Bohyung; Weon, Jin Bae; Eom, Min Rye; Jung, Youn Sik; Ma, Choong Je

    2015-01-01

    Background: Tilia amurensis (Tiliacese) has been used for anti-tumor and anti-inflammatory in Korea, China, and Japan. Objective: In this study, we isolated five compounds from T. amurensis and determined whether protected neuronal cells against glutamate-induced oxidative stress in HT22 cells. Materials and Methods: Compounds were isolated using chromatographic techniques including silica gel, Sephadex LH-20 open column and high performance liquid chromatography analysis, and evaluated neuroprotective effect in HT22 cells by 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. Results: β-D-fructofuranosyl α-D-glucopyranoside (1), (-)-epicatechin (2), nudiposide (3), lyoniside (4), and scopoletin (5) were isolated by bioactivity-guided fractionation from the ethyl acetate fraction of T. amurensis. Among them, (-)-epicatechin, nudiposide, lyoniside, and scopoletin had significant neuroprotective activities against glutamate-injured neurotoxicity in HT22 cells. Conclusion: These results demonstrated that compound two, three, four, and five have a pronounced protective effect against glutamate-induced neurotoxicity in HT22 cells. PMID:26664019

  15. Butyltin compounds in Portuguese wines.

    PubMed

    Azenha, Manuel; Vasconcelos, Maria Teresa

    2002-04-24

    Butyltin compounds are widespread contaminants that have also been found in some wines. The purpose of the present work was to make a survey of butyltin compounds in Portuguese wines. Forty-three table wines and 14 Port wines were analyzed for butyltin contents by using solid-phase microextraction gas chromatography mass spectrometry (SPME-GC-MS). In 14% of the analyzed wine samples, measurable dibutyltin (DBT) was found at concentrations ranging between 0.05 and 0.15 microg/L as Sn. Monobutyltin (MBT) was also observed (0.05 microg/L as Sn) in just a single wine. A search for the possible sources of DBT residues found in the wines was carried out. Therefore, some plastics and oak wood used in the process of wine-making, which have been directly in contact with the musts or the wines, were studied to check their possible release of butyltins. The eventual presence of DBT was also tested directly along the vinification process, from the must to the finished product. The results suggest that high-density polyethylene containers used in the transfer of wine in an early stage of the vinification process may be the main sources of these contaminants. Therefore, it is recommendable that plastic materials to be used in wineries be previously tested for the release of butyltin compounds.

  16. Natural Compounds Modulating Mitochondrial Functions

    PubMed Central

    Gibellini, Lara; Bianchini, Elena; De Biasi, Sara; Nasi, Milena; Cossarizza, Andrea; Pinti, Marcello

    2015-01-01

    Mitochondria are organelles responsible for several crucial cell functions, including respiration, oxidative phosphorylation, and regulation of apoptosis; they are also the main intracellular source of reactive oxygen species (ROS). In the last years, a particular interest has been devoted to studying the effects on mitochondria of natural compounds of vegetal origin, quercetin (Qu), resveratrol (RSV), and curcumin (Cur) being the most studied molecules. All these natural compounds modulate mitochondrial functions by inhibiting organelle enzymes or metabolic pathways (such as oxidative phosphorylation), by altering the production of mitochondrial ROS and by modulating the activity of transcription factors which regulate the expression of mitochondrial proteins. While Qu displays both pro- and antioxidant activities, RSV and Cur are strong antioxidant, as they efficiently scavenge mitochondrial ROS and upregulate antioxidant transcriptional programmes in cells. All the three compounds display a proapoptotic activity, mediated by the capability to directly cause the release of cytochrome c from mitochondria or indirectly by upregulating the expression of proapoptotic proteins of Bcl-2 family and downregulating antiapoptotic proteins. Interestingly, these effects are particularly evident on proliferating cancer cells and can have important therapeutic implications. PMID:26167193

  17. Compound facial expressions of emotion.

    PubMed

    Du, Shichuan; Tao, Yong; Martinez, Aleix M

    2014-04-15

    Understanding the different categories of facial expressions of emotion regularly used by us is essential to gain insights into human cognition and affect as well as for the design of computational models and perceptual interfaces. Past research on facial expressions of emotion has focused on the study of six basic categories--happiness, surprise, anger, sadness, fear, and disgust. However, many more facial expressions of emotion exist and are used regularly by humans. This paper describes an important group of expressions, which we call compound emotion categories. Compound emotions are those that can be constructed by combining basic component categories to create new ones. For instance, happily surprised and angrily surprised are two distinct compound emotion categories. The present work defines 21 distinct emotion categories. Sample images of their facial expressions were collected from 230 human subjects. A Facial Action Coding System analysis shows the production of these 21 categories is different but consistent with the subordinate categories they represent (e.g., a happily surprised expression combines muscle movements observed in happiness and surprised). We show that these differences are sufficient to distinguish between the 21 defined categories. We then use a computational model of face perception to demonstrate that most of these categories are also visually discriminable from one another.

  18. Technology Roadmaps for Compound Semiconductors.

    PubMed

    Bennett, H S

    2000-01-01

    The roles cited for compound semiconductors in public versions of existing technology roadmaps from the National Electronics Manufacturing Initiative, Inc., Optoelectronics Industry Development Association, Microelectronics Advanced Research Initiative on Optoelectronic Interconnects, and Optoelectronics Industry and Technology Development Association (OITDA) are discussed and compared within the context of trends in the Si CMOS industry. In particular, the extent to which these technology roadmaps treat compound semiconductors at the materials processing and device levels will be presented for specific applications. For example, OITDA's Optical Communications Technology Roadmap directly connects the information demand of delivering 100 Mbit/s to the home to the requirement of producing 200 GHz heterojunction bipolar transistors with 30 nm bases and InP high electron mobility transistors with 100 nm gates. Some general actions for progress towards the proposed International Technology Roadmap for Compound Semiconductors (ITRCS) and methods for determining the value of an ITRCS will be suggested. But, in the final analysis, the value added by an ITRCS will depend on how industry leaders respond. The technical challenges and economic opportunities of delivering high quality digital video to consumers provide concrete examples of where the above actions and methods could be applied.

  19. Technology Roadmaps for Compound Semiconductors

    PubMed Central

    Bennett, Herbert S.

    2000-01-01

    The roles cited for compound semiconductors in public versions of existing technology roadmaps from the National Electronics Manufacturing Initiative, Inc., Optoelectronics Industry Development Association, Microelectronics Advanced Research Initiative on Optoelectronic Interconnects, and Optoelectronics Industry and Technology Development Association (OITDA) are discussed and compared within the context of trends in the Si CMOS industry. In particular, the extent to which these technology roadmaps treat compound semiconductors at the materials processing and device levels will be presented for specific applications. For example, OITDA’s Optical Communications Technology Roadmap directly connects the information demand of delivering 100 Mbit/s to the home to the requirement of producing 200 GHz heterojunction bipolar transistors with 30 nm bases and InP high electron mobility transistors with 100 nm gates. Some general actions for progress towards the proposed International Technology Roadmap for Compound Semiconductors (ITRCS) and methods for determining the value of an ITRCS will be suggested. But, in the final analysis, the value added by an ITRCS will depend on how industry leaders respond. The technical challenges and economic opportunities of delivering high quality digital video to consumers provide concrete examples of where the above actions and methods could be applied. PMID:27551615

  20. Bioactive compounds from northern plants.

    PubMed

    Hohtola, Anja

    2010-01-01

    Northern conditions are characterised by long days with much light and low temperatures during the growing season. It has been chimed that herbs and berries grown in the north are stronger tasting compared to those of southern origin. The compounds imparting aroma and color to berries and herbs are secondary metabolites which in plants mostly act as chemical means of defense. Recently, the production of secondary metabolites using plant cells has been the subject of expanding research. Light intensity, photoperiod and temperature have been reported to influence the biosynthesis of many secondary metabolites. Native wild aromatic and medicinal plant species of different families are being studied to meet the needs of raw material for the expanding industry of e.g., health-promoting food products known as nutraceutics. There are already a large number of known secondary compounds produced by plants, but the recent advances in modern extraction and analysis should enable many more as yet unknown compounds to be found, characterised and utilised. Rose root (Rhodiola rosea) is a perennial herbaceous plant which inhabits mountain regions throughout Europe, Asia and east coastal regions of North America. The extract made from the rhizomes acts as a stimulant like the Ginseng root. Roseroot has been categorized as an adaptogen and is reported to have many pharmacological properties. The biologically active components of the extract are salitroside tyrosol and cinnamic acid glycosides (rosavin, rosarin, rosin). Round-leaved sundew (Drosera rotundifolia L.) has circumboreal distribution. It inhabits nutrient-poor, moist and sunny areas such as peat bogs and wetlands. Sundew leaves are collected from the wild-type for various medicinal preparations and can be utilized in treating e.g., as an important "cough-medicine" for different respiratory diseases. The antimicrobial activity of extracts of aerial parts against various bacteria has been investigated. Drosera produces

  1. Compounding practices in a Portuguese community pharmacy.

    PubMed

    Reis, Maria; Carvalho, Maria; Rodrigues, Angelo

    2014-01-01

    All Portuguese community pharmacies have a compounding laboratory and minimum equipment for the preparation of nonsterile (traditional) compounded medicines, but a few community pharmacies specialize in compounding. At Farmácia Lordelo, the most frequently dispensed compounded medicines are oral liquids for pediatrics and multi-drug, semi-solid preparations for dermatology patients. The majority of the compounded medicines is prepared in accordance with the national galenic formulary and standardized monographs, in order to guarantee the quality and safety of the compounded medicines dispensed.

  2. Compounding USP <797>: inspection, regulation, and oversight of sterile compounding pharmacies.

    PubMed

    Kastango, Eric S

    2012-03-01

    Using USP Chapter <797> Pharmaceutical Compounding-Sterile Preparations (CSP) is now considered the standard for sterile compounding practice and safety in the United States. This is particularly important in compounding the complex formulation of parenteral nutrition.

  3. Volatile flavor compounds in yogurt: a review.

    PubMed

    Cheng, Hefa

    2010-11-01

    Considerable knowledge has been accumulated on the volatile compounds contributing to the aroma and flavor of yogurt. This review outlines the production of the major flavor compounds in yogurt fermentation and the analysis techniques, both instrumental and sensory, for quantifying the volatile compounds in yogurt. The volatile compounds that have been identified in plain yogurt are summarized, with the few key aroma compounds described in detail. Most flavor compounds in yogurt are produced from lipolysis of milkfat and microbiological transformations of lactose and citrate. More than 100 volatiles, including carbonyl compounds, alcohols, acids, esters, hydrocarbons, aromatic compounds, sulfur-containing compounds, and heterocyclic compounds, are found in yogurt at low to trace concentrations. Besides lactic acid, acetaldehyde, diacetyl, acetoin, acetone, and 2-butanone contribute most to the typical aroma and flavor of yogurt. Extended storage of yogurt causes off-flavor development, which is mainly attributed to the production of undesired aldehydes and fatty acids during lipid oxidation. Further work on studying the volatile flavor compounds-matrix interactions, flavor release mechanisms, and the synergistic effect of flavor compounds, and on correlating the sensory properties of yogurt with the compositions of volatile flavor compounds are needed to fully elucidate yogurt aroma and flavor.

  4. Chemical consequences of radioactive decay. 2. Spectrophotometric study of the ingrowth of berkelium-249 and californium-249 into halides of einsteinium-253

    SciTech Connect

    Young, J.P.; Haire, R.G.; Peterson, J.R.; Ensor, D.D.; Fellows, R.L.

    1981-11-01

    The ingrowth of /sup 249/Bk daughter and /sup 249/Cf granddaughter into fluorides, chlorides, bromides, and iodides of parent /sup 253/Es was followed by spectrophotometric methods. In the case of trivalent Es halides, the oxidation state of the parent is maintained by its progeny. In the case of divalent Es halides, the oxidation state of the parent is retained by the granddaughter species. No other oxidation states or chemical species of the progeny ions are observed even though experimental conditions of storage such as physical state, temperature, or cover-gas composition were varied. These results are considered in terms of mechanisms that would allow such chemical stability.

  5. Some statistics on intermetallic compounds.

    PubMed

    Dshemuchadse, Julia; Steurer, Walter

    2015-02-02

    It is still largely unknown why intermetallic phases show such a large variety of crystal structures, with unit cell sizes varying between 1 and more than 20 000 atoms. The goal of our study was, therefore, to get a general overview of the symmetries, unit cell sizes, stoichiometries, most frequent structure types, and their stability fields based on the Mendeleev numbers as ordering parameters. A total of 20829 structures crystallizing in 2166 structure types have been studied for this purpose. Thereby, the focus was on a subset of 6441 binary intermetallic compounds, which crystallize in 943 structure types.

  6. Volatile organic compound sensor system

    DOEpatents

    Schabron, John F [Laramie, WY; Rovani, Jr., Joseph F.; Bomstad, Theresa M [Waxahachie, TX; Sorini-Wong, Susan S [Laramie, WY; Wong, Gregory K [Laramie, WY

    2011-03-01

    Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

  7. Volatile organic compound sensor system

    DOEpatents

    Schabron, John F [Laramie, WY; Rovani, Jr., Joseph F.; Bomstad, Theresa M [Laramie, WY; Sorini-Wong, Susan S [Laramie, WY

    2009-02-10

    Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

  8. Structure Determination of Compound 34

    DTIC Science & Technology

    1991-09-01

    report documents the results of this study. 3. EXPERIMENTAL SECTION 3.1 Materials. The sample of Compound 34 (a purplish- blue solid) was obtained from the...resulting blue solution was applied to the plate with a capillary tube drawn to a fine point. The methods of detection included visible light...chloroform (3 by 15 mL). The chloroform solution was dried over MgS04 , filtered, and then evaporated to yield a purple/ blue oil that solidified on standing

  9. Hyperpolarizable compounds and devices fabricated therefrom

    DOEpatents

    Therien, M.J.; DiMagno, S.G.

    1998-07-21

    Substituted compounds having relatively large molecular first order hyperpolarizabilities are provided, along with devices and materials containing them. In general, the compounds bear electron-donating and electron-withdrawing chemical substituents on a polyheterocyclic core. 13 figs.

  10. Lipid encapsulated phenolic compounds by fluidization

    USDA-ARS?s Scientific Manuscript database

    Phenolic compounds exhibit antioxidant and antimicrobial activities with applications as functional food and feed additives. Ferulic acid, a phenolic compound present in grain crops and lignocellulose biomass, was encapsulated with saturated triglycerides using a laboratory fluidizer. Stability of t...

  11. Therapeutic Phytogenic Compounds for Obesity and Diabetes

    PubMed Central

    Jung, Hee Soong; Lim, Yun; Kim, Eun-Kyoung

    2014-01-01

    Natural compounds have been used to develop drugs for many decades. Vast diversities and minimum side effects make natural compounds a good source for drug development. However, the composition and concentrations of natural compounds can vary. Despite this inconsistency, half of the Food and Drug Administration (FDA)-approved pharmaceuticals are natural compounds or their derivatives. Therefore, it is essential to continuously investigate natural compounds as sources of new pharmaceuticals. This review provides comprehensive information and analysis on natural compounds from plants (phytogenic compounds) that may serve as anti-obesity and/or anti-diabetes therapeutics. Our growing understanding and further exploration of the mechanisms of action of the phytogenic compounds may afford opportunities for development of therapeutic interventions in metabolic diseases. PMID:25421245

  12. Therapeutic phytogenic compounds for obesity and diabetes.

    PubMed

    Jung, Hee Soong; Lim, Yun; Kim, Eun-Kyoung

    2014-11-21

    Natural compounds have been used to develop drugs for many decades. Vast diversities and minimum side effects make natural compounds a good source for drug development. However, the composition and concentrations of natural compounds can vary. Despite this inconsistency, half of the Food and Drug Administration (FDA)-approved pharmaceuticals are natural compounds or their derivatives. Therefore, it is essential to continuously investigate natural compounds as sources of new pharmaceuticals. This review provides comprehensive information and analysis on natural compounds from plants (phytogenic compounds) that may serve as anti-obesity and/or anti-diabetes therapeutics. Our growing understanding and further exploration of the mechanisms of action of the phytogenic compounds may afford opportunities for development of therapeutic interventions in metabolic diseases.

  13. Groundwater Dating with Atmospheric Halogenated Compounds

    USGS Publications Warehouse

    Haase, Karl B.; Busenberg, Eurybiades

    2014-01-01

    "Atmospheric environmental releases refer to the emission of stable, long-lived compounds of solely anthropogenic origin into the atmosphere and the use of the compounds to estimate dates of their incorporation into groundwater."

  14. Hyperpolarizable compounds and devices fabricated therefrom

    DOEpatents

    Therien, Michael J.; DiMagno, Stephen G.

    1998-01-01

    Substituted compounds having relatively large molecular first order hyperpolarizabilities are provided, along with devices and materials containing them. In general, the compounds bear electron-donating and electron-withdrawing chemical substituents on a polyheterocyclic core.

  15. Compound Data Mining for Drug Discovery.

    PubMed

    Bajorath, Jürgen

    2017-01-01

    In recent years, there has been unprecedented growth in compound activity data in the public domain. These compound data provide an indispensable resource for drug discovery in academic environments as well as in the pharmaceutical industry. To handle large volumes of heterogeneous and complex compound data and extract discovery-relevant knowledge from these data, advanced computational mining approaches are required. Herein, major public compound data repositories are introduced, data confidence criteria reviewed, and selected data mining approaches discussed.

  16. Two new acetylenic compounds from Asparagus officinalis.

    PubMed

    Li, Xue-Mei; Cai, Jin-Long; Wang, Wen-Xiang; Ai, Hong-Lian; Mao, Zi-Chao

    2016-01-01

    Two new acetylenic compounds, asparoffins A (1) and B (2), together with two known compounds, nyasol (3) and 3″-methoxynyasol (4), were isolated from stems of Asparagus officinalis. The structures of two new compounds were elucidated on the basis of detailed spectroscopic analyses (UV, IR, MS, 1D, and 2D NMR). All compounds were evaluated for their cytotoxicities against three human cancer cell lines.

  17. Prebiotic Evolution of Nitrogen Compounds

    NASA Technical Reports Server (NTRS)

    Arrhenius, G.

    1999-01-01

    Support from this four year grant has funded our research on two general problems. One involves attempts to model the abiotic formation of simple source compounds for functional biomolecules, their concentration from dilute state in the hydrosphere and, in several cases, surface induced reactions to form precursor monomers for bioactive end products (refs. 1-5). Because of the pervasiveness and antiquity of phosphate based biochemistry and the catalytic activity of RNA we have exploring the hypothesis of an RNA World as an early stage in the emergence of life. This concept is now rather generally considered, but has been questioned due to the earlier lack of an experimentally demonstrated successful scheme for the spontaneous formation of ribose phosphate, the key backbone molecule in RNA. That impediment has now been removed. This has been achieved by demonstrating probable sources of activated (condensed) highly soluble and strongly sorbed phosphates in nature (Refs. 1,2) and effective condensation of aldehyde phosphates to form ribose phosphate in high yield (ref.6), thereby placing the RNA World concept on a somewhat safer experimental footing. Like all work in this field these experiments are oversimplifications that largely ignore competing side reactions with other compounds expected to be present. None the less our choice of experimental conditions aim at selective processes that eliminate interfering reactions. We have also sought to narrow the credibility gap by simulating geophysically and geochemically plausible conditions surrounding the putative prebiotic reactions.

  18. Corrosion Preventive Compounds Lifetime Testing

    NASA Technical Reports Server (NTRS)

    Hale, Stephanie M.; Kammerer, Catherine C.

    2007-01-01

    Lifetime Testing of Corrosion Preventive Compounds (CPCs) was performed to quantify performance in the various environments to which the Space Shuttle Orbiter is exposed during a flight cycle. Three CPCs are approved for use on the Orbiter: HD Calcium Grease, Dinitrol AV-30, and Braycote 601 EF. These CPCs have been rigorously tested to prove that they mitigate corrosion in typical environments, but little information is available on how they perform in the unique combination of the coastal environment at the launch pad, the vacuum of low-earth orbit, and the extreme heat of reentry. Currently, there is no lifetime or reapplication schedule established for these compounds that is based on this combination of environmental conditions. Aluminum 2024 coupons were coated with the three CPCs and exposed to conditions that simulate the environments to which the Orbiter is exposed. Uncoated Aluminum 2024 coupons were exposed to the environmental conditions as a control. Visual inspection and Electro- Impedance Spectroscopy (EIS) were performed on the samples in order to determine the effectiveness of the CPCs. The samples were processed through five mission life cycles or until the visual inspection revealed the initiation of corrosion and EIS indicated severe degradation of the coating.

  19. Corrosion Preventive Compounds Lifetime Testing

    NASA Technical Reports Server (NTRS)

    Hale, Stephanie M.; Kammerer, Catherine C.; Copp, Tracy L.

    2007-01-01

    Lifetime Testing of Corrosion Preventive Compounds (CPCs) was performed to quantify performance in the various environments to which the Space Shuttle Orbiter is exposed during a flight cycle. Three CPCs are approved for use on the Orbiter: RD Calcium Grease, Dinitrol AV-30, and Braycote 601 EF. These CPCs have been rigorously tested to prove that they mitigate corrosion in typical environments, but little information is available on how they perform in the unique combination of the coastal environment at the launch pad, the vacuum of low-earth orbit, and the extreme heat of reentry. Currently, there is no lifetime or reapplication schedule established for these compounds that is based on this combination of environmental conditions. Aluminum 2024 coupons were coated with the three CPCs and exposed to conditions that simulate the environments to which the Orbiter is exposed. Uncoated Aluminum 2024 coupons were exposed to the environmental conditions as a control. Visual inspection and Electro- Impedance Spectroscopy (EIS) were performed on the samples in order to determine the effectiveness of the CPCs. The samples were processed through five mission life cycles or until the visual inspection revealed the initiation of corrosion and EIS indicated severe degradation of the coating.

  20. Compound prism design principles, I

    PubMed Central

    Hagen, Nathan; Tkaczyk, Tomasz S.

    2011-01-01

    Prisms have been needlessly neglected as components used in modern optical design. In optical throughput, stray light, flexibility, and in their ability to be used in direct-view geometry, they excel over gratings. Here we show that even their well-known weak dispersion relative to gratings has been overrated by designing doublet and double Amici direct-vision compound prisms that have 14° and 23° of dispersion across the visible spectrum, equivalent to 800 and 1300 lines/mm gratings. By taking advantage of the multiple degrees of freedom available in a compound prism design, we also show prisms whose angular dispersion shows improved linearity in wavelength. In order to achieve these designs, we exploit the well-behaved nature of prism design space to write customized algorithms that optimize directly in the nonlinear design space. Using these algorithms, we showcase a number of prism designs that illustrate a performance and flexibility that goes beyond what has often been considered possible with prisms. PMID:22423145

  1. Fiber Compounds and Human Health.

    PubMed

    Camara, Montana; Fernandez-Ruiz, Virginia; Morales, Patricia; Sanchez-Mata, Maria Cortes

    2017-01-01

    It is known that insufficient consumption of fiber in Western societies is directly linked to certain diseases. The required daily fiber intake can be obtained from foods such as fruits and vegetables, whole grains, legumes, nuts and others, or by eating foods enriched with fiber as a functional ingredient. This review studies certain fiber compounds such as oligosaccharides (namely α-galactosides and fructans), arabinoxylans and β-glucans. The European regulatory body governing nutrition and health claims aims to protect consumers' right to receive truthful information about food by verifying statements on "nutrition", "content", "health claims" and "reducing the risk of disease". Some of these foods and functional ingredients can be considered as "novel foods". This paper describes the state of the art of certain fiber compounds and their effect on human health; the different requirements for fiber components used as functional or novel food ingredients; and the response of the European authorities to the use of this ingredient and its related health claims in terms of food labelling. After EFSA approval, these claims can be used in food labelling as an added value for consumer health, which may also improve their success in the market. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  2. Antimicrobial compounds of porcine mucosa

    NASA Astrophysics Data System (ADS)

    Kotenkova, E. A.; Lukinova, E. A.; Fedulova, L. V.

    2017-09-01

    The aim of the study was to investigate porcine oral cavity mucosa (OCM), nasal cavity mucosa (NCM), rectal mucosa (RM) and tongue mucosa (TM) as sources of antimicrobial compounds. Ultrafiltrates with MW >30 kDa, MW 5-30 kDa and MW <5 kDa were obtained. All ultrafiltrates had antimicrobial activity against Escherichia coli and Proteus vulgaris. NCM ultrafiltrates revealed the highest antibacterial activity in respect to negative control: for the fraction with MW >30 kDa, the zone of microbial growth inhibition was 7.5 mm, for the MW<5 kDa fraction, it was 7 mm, and for MW 5-30 kDa fraction, it was 4.5 mm. No significant differences were found in high molecular weight proteomic profile, while qualitative and quantitative differences were observed in the medium and low molecular weight areas, especially in OCM and NCM. HPLC showed 221 tissue-specific peptides in OCM, 156 in NCM, 225 in RM, but only 5 in TM. The results observed confirmed porcine mucous tissues as a good source of antimicrobial compounds, which could be an actual alternative for reduction of microbial spoilage of foods.

  3. Semiconducting compounds and devices incorporating same

    DOEpatents

    Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2016-01-19

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  4. Semiconducting compounds and devices incorporating same

    DOEpatents

    Marks, Tobin J; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2014-06-17

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  5. Thin films of mixed metal compounds

    DOEpatents

    Mickelsen, Reid A.; Chen, Wen S.

    1985-01-01

    A compositionally uniform thin film of a mixed metal compound is formed by simultaneously evaporating a first metal compound and a second metal compound from independent sources. The mean free path between the vapor particles is reduced by a gas and the mixed vapors are deposited uniformly. The invention finds particular utility in forming thin film heterojunction solar cells.

  6. Five new bioactive compounds from Chenopodium ambrosioides.

    PubMed

    Song, Kun; Zhang, Jian; Zhang, Peng; Wang, Hong-Qing; Liu, Chao; Li, Bao-Ming; Kang, Jie; Chen, Ruo-Yun

    2015-05-01

    Five new bioactive compounds, chenopodiumamines A-D (1-4) and chenopodiumoside A (5), were isolated from the ethanol extract of Chenopodium ambrosioides. The structures of these compounds were elucidated by various spectroscopic means (UV, IR, HR-ESI-MS, 1D and 2D NMR). Compounds 1-3 had moderate antioxidant and anti-inflammatory activities.

  7. The Modification of Compounds by Attributive Adjectives

    ERIC Educational Resources Information Center

    Berg, Thomas

    2011-01-01

    This paper examines the modification of nominal compounds by attributive adjectives in English. It draws on a distinction between compound-external (i.e. syntactic) and compound-internal (i.e. morphological) modification. An analysis is presented of more than 1000 pertinent cases, which are roughly equally divided into two-, three- and four-noun…

  8. The Modification of Compounds by Attributive Adjectives

    ERIC Educational Resources Information Center

    Berg, Thomas

    2011-01-01

    This paper examines the modification of nominal compounds by attributive adjectives in English. It draws on a distinction between compound-external (i.e. syntactic) and compound-internal (i.e. morphological) modification. An analysis is presented of more than 1000 pertinent cases, which are roughly equally divided into two-, three- and four-noun…

  9. INSENSITIVE HIGH-NITROGEN COMPOUNDS

    SciTech Connect

    D. CHAVEZ; ET AL

    2001-03-01

    The conventional approach to developing energetic molecules is to chemically place one or more nitro groups onto a carbon skeleton, which is why the term ''nitration'' is synonymous to explosives preparation. The nitro group carries the oxygen that reacts with the skeletal carbon and hydrogen fuels, which in turn produces the heat and gaseous reaction products necessary for driving an explosive shock. These nitro-containing energetic molecules typically have heats of formation near zero and therefore most of the released energy is derived from the combustion process. Our investigation of the tetrazine, furazan and tetrazole ring systems has offered a different approach to explosives development, where a significant amount of the chemical potential energy is derived from their large positive heats of formation. Because these compounds often contain a large percentage of nitrogen atoms, they are usually regarded as high-nitrogen fuels or explosives. A general artifact of these high-nitrogen compounds is that they are less sensitive to initiation (e.g. by impact) when compared to traditional nitro-containing explosives of similar performances. Using the precursor, 3,6-bis-(3,5-dimethylpyrazol-1-yl)-s-tetrazine, several useful energetic compounds based on the s-tetrazine system have been synthesized and studied. Some of the first compounds are 3,6-diamino-s-tetrazine-1,4-dioxide (LAX-112) and 3,6-dihydrazino-s-tetrazine (DHT). LAX-112 was once extensively studied as an insensitive explosive by Los Alamos; DHT is an example of a high-nitrogen explosive that relies entirely on its heat of formation for sustaining a detonation. Recent synthesis efforts have yielded an azo-s-tetrazine, 3,3'-azobis(6-amino-s-tetrazine) or DAAT, which has a very high positive heat of formation. The compounds, 4,4'-diamino-3,3'-azoxyfurazan (DAAF) and 4,4'-diamino-3,3'-azofurazan (DAAzF), may have important future roles in insensitive explosive applications. Neither DAAF nor DAAzF can be

  10. Antioxidant phenolic compounds from Pu-erh tea.

    PubMed

    Zhang, Hai Ming; Wang, Cheng Fang; Shen, Sheng Min; Wang, Gang Li; Liu, Peng; Liu, Zi Mu; Wang, Yong Yan; Du, Shu Shan; Liu, Zhi Long; Deng, Zhi Wei

    2012-11-27

    Eight compounds were isolated from the water extract of Pu-erh tea and their structures were elucidated by NMR and MS as gallic acid (1), (+)-catechin (2), (−)-epicatechin (3), (−)-epicatechin-3-O-gallate (4), (−)-epigallocatechin-3-O-gallate (5), (−)-epiafzelechin- 3-O-gallate (6), kaempferol (7), and quercetin (8). Their in vitro antioxidant activities were assessed by the DPPH and ABTS scavenging methods with microplate assays. The relative order of DPPH scavenging capacity for these compounds was compound 8 > compound 7 > compound 1 > compound 6 > compound 4 ≈ compound 5 > compound 2 > VC (reference) > compound 3, and that of ABTS scavenging capacity was compound 1 > compound 2 > compound 7 ≈ compound 8 > compound 6 > compound 5 > compound 4 > VC (reference) > compound 3. The results showed that these phenolic compounds contributed to the antioxidant activity of Pu-erh tea.

  11. Method for purifying bidentate organophosphorous compounds

    DOEpatents

    McIsaac, Lyle D.; Krupa, Joseph F.; Schroeder, Norman C.

    1981-01-01

    Bidentate organophosphorous compounds are purified of undesirable impurities by contacting a solution of the compounds with a mercuric nitrate solution to form an insoluble mercuric bidentate compound which precipitates while the impurities remain in solution. The precipitate is washed and then contacted with a mixture of an aqueous solution of a strong mercuric ion complexing agent and an organic solvent to complex the mercuric ion away from the bidentate compound which then dissolves in the solvent. The purified bidentate compounds are useful for extracting the actinide elements from aqueous acidic nuclear waste solutions.

  12. Highly sweet compounds of plant origin.

    PubMed

    Kim, Nam-Cheol; Kinghorn, A Douglas

    2002-12-01

    The demand for new alternative "low calorie" sweeteners for dietetic and diabetic purposes has increased worldwide. Although the currently developed and commercially used highly sweet sucrose substitutes are mostly synthetic compounds, the search for such compounds from natural sources is continuing. As of mid-2002, over 100 plant-derived sweet compounds of 20 major structural types had been reported, and were isolated from more than 25 different families of green plants. Several of these highly sweet natural products are marketed as sweeteners or flavoring agents in some countries as pure compounds, compound mixtures, or refined extracts. These highly sweet natural substances are reviewed herein.

  13. Elastomer Compound Developed for High Wear Applications

    NASA Technical Reports Server (NTRS)

    Crawford, D.; Feuer, H.; Flanagan, D.; Rodriguez, G.; Teets, A.; Touchet, P.

    1993-01-01

    The U.S. Army is currently spending 300 million dollars per year replacing rubber track pads. An experimental rubber compound has been developed which exhibits 2 to 3 times greater service life than standard production pad compounds. To improve the service life of the tank track pads various aspects of rubber chemistry were explored including polymer, curing and reinforcing systems. Compounds that exhibited superior physical properties based on laboratory data were then fabricated into tank pads and field tested. This paper will discuss the compounding studies, laboratory data and field testing that led to the high wear elastomer compound.

  14. Veterinary Compounding: Regulation, Challenges, and Resources.

    PubMed

    Davidson, Gigi

    2017-01-10

    The spectrum of therapeutic need in veterinary medicine is large, and the availability of approved drug products for all veterinary species and indications is relatively small. For this reason, extemporaneous preparation, or compounding, of drugs is commonly employed to provide veterinary medical therapies. The scope of veterinary compounding is broad and focused primarily on meeting the therapeutic needs of companion animals and not food-producing animals in order to avoid human exposure to drug residues. As beneficial as compounded medical therapies may be to animal patients, these therapies are not without risks, and serious adverse events may occur from poor quality compounds or excipients that are uniquely toxic when administered to a given species. Other challenges in extemporaneous compounding for animals include significant regulatory variation across the global veterinary community, a relative lack of validated compounding formulas for use in animals, and poor adherence by compounders to established compounding standards. The information presented in this article is intended to provide an overview of the current landscape of compounding for animals; a discussion on associated benefits, risks, and challenges; and resources to aid compounders in preparing animal compounds of the highest possible quality.

  15. Practices of pharmacies that compound extemporaneous formulations.

    PubMed

    Treadway, Angela K; Craddock, Deeatra; Leff, Richard

    2007-07-01

    A survey was conducted to characterize the standard of practice for extemporaneous pharmaceutical compounding within community and institutional pharmacies. Extemporaneous compounding practices vary among pharmacies. Because of this, the survey inquired specifically about a single pharmaceutical product (caffeine citrate 20 mg/mL) to minimize variability among respondents. Survey questions were written to identify compounding practice variations with (1) policies and procedures, (2) process validation, (3) personnel education, training, and evaluation, (4) expiration dating, (5) storage and handling of compounded prescriptions within the pharmacy, (6) labeling, (7) facilities and equipment, (8) end-product evaluation, (9) handling of sterile products outside of the pharmacy, (10) aseptic technique and product preparation, and (11) documentation. A total of 522 surveys were mailed; 117 completed surveys were returned and included in the analyses. Over half of the pharmacies surveyed were large institutional pharmacies with daily prescriptions exceeding 300. Almost 71% of pharmacies reported having policies and procedures for compounding and providing compounding training for staff. Almost one third of the pharmacies that responded did not have compounding policies and procedures and did not provide staff training. For those pharmacies that provided training, the methods used were diverse (e.g., lectures and videotapes, external certificate programs). Formulations used to compound caffeine appeared to be diverse as evidenced by the varied addition of inactive ingredients. A survey of compounding pharmacies found variability in overall compounding practices and training and in practices specifically related to compounding preparations of caffeine citrate.

  16. Veterinary Compounding: Regulation, Challenges, and Resources

    PubMed Central

    Davidson, Gigi

    2017-01-01

    The spectrum of therapeutic need in veterinary medicine is large, and the availability of approved drug products for all veterinary species and indications is relatively small. For this reason, extemporaneous preparation, or compounding, of drugs is commonly employed to provide veterinary medical therapies. The scope of veterinary compounding is broad and focused primarily on meeting the therapeutic needs of companion animals and not food-producing animals in order to avoid human exposure to drug residues. As beneficial as compounded medical therapies may be to animal patients, these therapies are not without risks, and serious adverse events may occur from poor quality compounds or excipients that are uniquely toxic when administered to a given species. Other challenges in extemporaneous compounding for animals include significant regulatory variation across the global veterinary community, a relative lack of validated compounding formulas for use in animals, and poor adherence by compounders to established compounding standards. The information presented in this article is intended to provide an overview of the current landscape of compounding for animals; a discussion on associated benefits, risks, and challenges; and resources to aid compounders in preparing animal compounds of the highest possible quality. PMID:28075379

  17. Antimicrobial compounds from Alpinia conchigera.

    PubMed

    Aziz, Ahmad Nazif; Ibrahim, Halijah; Rosmy Syamsir, Devi; Mohtar, Mastura; Vejayan, Jaya; Awang, Khalijah

    2013-02-13

    The rhizome of Alpinia conchigerahas been used as a condiment in the northern states of Peninsular Malaysia and occasionally in folk medicine in the east coast to treat fungal infections. In some states of Peninsular Malaysia, the rhizomes are consumed as a post-partum medicine and the young shoots are prepared into a vegetable dish. This study aimed to investigate the chemical constituents of the pseudostems and rhizomes of Malaysian Alpinia conchigera and to evaluate the antimicrobial activity of the dichloromethane (DCM) extracts of the pseudostems, rhizomes and the isolated compounds against three selected fungi and five strains of Staphylococcus aureus. The dried and ground pseudostems (0.8kg) and rhizomes (1.0kg) were successively extracted in Soxhlet extractor using n-hexane, dichloromethane (DCM) and methanol. The n-hexane and DCM extracts of the pseudostem and rhizome were subjected to isolation and purification using column chromatography on silica gel using a stepwise gradient system (n-hexane to methanol). Briefly, a serial two fold dilutions of the test materials dissolved in DMSO were prepared prior to addition of 100μl overnight microbial suspension (108 cfu/ml) followed by incubation at 37°C (bacteria) or 26°C (dermatophytes and candida) for 24h. The highest concentration of DMSO remaining after dilution (5%, v/v) caused no inhibition to bacterial/candida/dermatophytes' growth. Antibiotic cycloheximide was used as reference for anticandidal and antidermatophyte comparison while oxacilin was used as reference for antibacterial testing. DMSO served as negative control. Turbidity was taken as indication of growth, thus the lowest concentration which remains clear after macroscopic evaluation was taken as the minimum inhibitory concentration (MIC). The isolation of n-hexane and DCM extracts of the rhizomes and pseudostems of Alpinia conchigera via column chromatography yielded two triterpenes isolated as a mixture of stigmasterol and

  18. Volatile organic compound sensing devices

    DOEpatents

    Lancaster, G.D.; Moore, G.A.; Stone, M.L.; Reagen, W.K.

    1995-08-29

    Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs. 15 figs.

  19. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-01-05

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70 C and 500 C and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  20. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70.degree. C. and 500.degree. C. and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  1. New permanent magnets; manganese compounds.

    PubMed

    Coey, J M D

    2014-02-12

    The exponential growth of maximum energy product that prevailed in the 20th century has stalled, leaving a market dominated by two permanent magnet materials, Nd2Fe14B and Ba(Sr)Fe12O19, for which the maximum theoretical energy products differ by an order of magnitude (515 kJ m(-3) and 45 kJ m(-3), respectively). Rather than seeking to improve on optimized Nd-Fe-B, it is suggested that some research efforts should be devoted to developing appropriately priced alternatives with energy products in the range 100-300 kJ m(-3). The prospects for Mn-based hard magnetic materials are discussed, based on known Mn-based compounds with the tetragonal L10 or D022 structure or the hexagonal B81 structure.

  2. METHOD OF RECOVERING URANIUM COMPOUNDS

    DOEpatents

    Poirier, R.H.

    1957-10-29

    S>The recovery of uranium compounds which have been adsorbed on anion exchange resins is discussed. The uranium and thorium-containing residues from monazite processed by alkali hydroxide are separated from solution, and leached with an alkali metal carbonate solution, whereby the uranium and thorium hydrorides are dissolved. The carbonate solution is then passed over an anion exchange resin causing the uranium to be adsorbed while the thorium remains in solution. The uranium may be recovered by contacting the uranium-holding resin with an aqueous ammonium carbonate solution whereby the uranium values are eluted from the resin and then heating the eluate whereby carbon dioxide and ammonia are given off, the pH value of the solution is lowered, and the uranium is precipitated.

  3. Organic compounds in carbonaceous meteorites.

    PubMed

    Sephton, Mark A

    2002-06-01

    The carbonaceous chondrite meteorites are fragments of asteroids that have remained relatively unprocessed since the formation of the solar system 4.6 billion years ago. These carbon-rich objects contain a variety of extraterrestrial organic molecules that constitute a record of chemical evolution prior to the origin of life. Compound classes include aliphatic hydrocarbons, aromatic hydrocarbons, amino acids, carboxylic acids, sulfonic acids, phosphonic acids, alcohols, aldehydes, ketones, sugars, amines, amides, nitrogen heterocycles, sulfur heterocycles and a relatively abundant high molecular weight macromolecular material. Structural and stable isotopic characteristics suggest that a number of environments may have contributed to the organic inventory, including interstellar space, the solar nebula and the asteroidal meteorite parent body. This review covers work published between 1950 and the present day and cites 193 references.

  4. Volatile organic compound sensing devices

    DOEpatents

    Lancaster, Gregory D.; Moore, Glenn A.; Stone, Mark L.; Reagen, William K.

    1995-01-01

    Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs.

  5. Thin films of mixed metal compounds

    DOEpatents

    Mickelsen, R.A.; Chen, W.S.

    1985-06-11

    Disclosed is a thin film heterojunction solar cell, said heterojunction comprising a p-type I-III-IV[sub 2] chalcopyrite substrate and an overlying layer of an n-type ternary mixed metal compound wherein said ternary mixed metal compound is applied to said substrate by introducing the vapor of a first metal compound to a vessel containing said substrate from a first vapor source while simultaneously introducing a vapor of a second metal compound from a second vapor source of said vessel, said first and second metals comprising the metal components of said mixed metal compound; independently controlling the vaporization rate of said first and second vapor sources; reducing the mean free path between vapor particles in said vessel, said gas being present in an amount sufficient to induce homogeneity of said vapor mixture; and depositing said mixed metal compound on said substrate in the form of a uniform composition polycrystalline mixed metal compound. 5 figs.

  6. Theoretical Studies on Cluster Compounds

    NASA Astrophysics Data System (ADS)

    Lin, Zhenyang

    interconversion of conformers of these clusters are described. In Chapter 5 Stone's Tensor Surface Harmonic methodology is applied to high nuclearity transition metal carbonyl cluster compounds with 13-44 metal atoms. Chapter 6 develops a new theoretical framework to account for the bonding in the high nuclearity ligated clusters with columnar topologies. In Chapter 7 the origin of non-bonding orbitals in molecular compounds is reviewed and analysed using general quantum mechanical considerations. (Abstract shortened by UMI.).

  7. High-Strength, Superelastic Compounds

    NASA Technical Reports Server (NTRS)

    Stanford, Malcolm; Noebe, Ronald; Dellacorte, Christopher; Bigelow, Glen; Thomas, Fransua

    2013-01-01

    In a previous disclosure, the use of 60- NiTiNOL, an ordered intermetallic compound composed of 60 weight percent nickel and 40 weight percent titanium, was investigated as a material for advanced aerospace bearings due to its unique combination of physical properties. Lessons learned during the development of applications for this material have led to the discovery that, with the addition of a ternary element, the resulting material can be thermally processed at a lower temperature to attain the same desirable hardness level as the original material. Processing at a lower temperature is beneficial, not only because it reduces processing costs from energy consumption, but because it also significantly reduces the possibility of quench cracking and thermal distortion, which have been problematic with the original material. A family of ternary substitutions has been identified, including Hf and Zr in various atomic percentages with varying concentrations of Ni and Ti. In the present innovation, a ternary intermetallic compound consisting of 57.6 weight percent Ni, 39.2 weight percent Ti, and 3.2 weight percent Hf (54Ni-45Ti-1Hf atomic percent) was prepared by casting. In this material, Hf substitutes for some of the Ti atoms in the material. In an alternate embodiment of the innovation, Zr, which is close in chemical behavior to Hf, is used as the substitutional element. With either substitution, the solvus temperature of the material is reduced, and lower temperatures can be used to obtain the necessary hardness values. The advantages of this innovation include the ability to solution-treat the material at a lower temperature and still achieve the required hardness for bearings (at least 50 Rockwell C) and superelastic behavior with recoverable strains greater than 2%. Most structural alloys will not return to their original shape after being deformed as little as 0.2% (a tenth of that possible with superelastic materials like 60 NiTiNOL). Because lower temperatures

  8. White ECD using zinc compound

    NASA Astrophysics Data System (ADS)

    Kashiwazaki, Naoya; Yamana, Masao

    1999-10-01

    Adiabatic planning for building is a good idea for saving energy and favor of earth environment. Windows of housing are important for providing natural lighting and ventilation, however, they obstruct adiabatic planning. Light-controllable windows, which are called `smart windows' are of use and one solution for adiabatic planning. Smart windows can control the intensity of light as user pleases. Their driving mechanism uses some kind of chromism, thermochromism, photochromism and/or electrochromism. Electrochromic device (ECD) can control both light-holding and heat-radiation by electrochemical redox. Most ECDs using transitional metal oxide which have been studied have colored states such as blue or brown. We consider that white ECD is more suitable for living spaces. In our study, white ECD materials were developed for smart-windows by using a zinc compound. This window changes between a transparent- state and a white-state, like a Japanese-SHOJI', in response to electric conditions. This smart-window can also control light-intensity (transparency) by both applied pulse width and pulse voltage, and no power is consumed to maintain a state. A test trial device which was assembled by our project can change its states between transparency and white, in stable, during over 500 trials.

  9. Environmentally Friendly Corrosion Preventative Compounds

    NASA Technical Reports Server (NTRS)

    Calle, Luz Marina; Montgomery, Eliza; Kolody, Mark; Curran, Jerry; Back, Teddy; Balles, Angela

    2012-01-01

    The objective of the Ground Systems Development and Operations Program Environmentally Friendly Corrosion Protective Coatings and Corrosion Preventive Compounds (CPCs) project is to identify, test, and develop qualification criteria for the use of environmentally friendly corrosion protective coatings and CPCs for flight hardware and ground support equipment. This document is the Final Report for Phase I evaluations, which included physical property, corrosion resistance, and NASA spaceport environment compatibility testing and analysis of fifteen CPC types. The CPCs consisted of ten different oily film CPCs and five different wax or grease CPC types. Physical property testing encompassed measuring various properties of the bulk CPCs, while corrosion resistance testing directly measured the ability of each CPC material to protect various metals against corrosion. The NASA spaceport environment compatibility testing included common tests required by NASA-STD-6001, "Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion". At the end of Phase I, CPC materials were down-selected for inclusion in the next test phases. This final report includes all data and analysis of results obtained by following the experimental test plan that was developed as part of the project. Highlights of the results are summarized by test criteria type.

  10. MONITORING SYNTHETIC MUSK COMPOUNDS IN ...

    EPA Pesticide Factsheets

    Synthetic musk compounds are manufactured as fragrance materials for consumer products and are consumed in very large quantities worldwide. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: To apply state-of-the-art envir

  11. Heterogeneous Integration of Compound Semiconductors

    NASA Astrophysics Data System (ADS)

    Moutanabbir, Oussama; Gösele, Ulrich

    2010-08-01

    The ability to tailor compound semiconductors and to integrate them onto foreign substrates can lead to superior or novel functionalities with a potential impact on various areas in electronics, optoelectronics, spintronics, biosensing, and photovoltaics. This review provides a brief description of different approaches to achieve this heterogeneous integration, with an emphasis on the ion-cut process, also known commercially as the Smart-Cut™ process. This process combines semiconductor wafer bonding and undercutting using defect engineering by light ion implantation. Bulk-quality heterostructures frequently unattainable by direct epitaxial growth can be produced, provided that a list of technical criteria is fulfilled, thus offering an additional degree of freedom in the design and fabrication of heterogeneous and flexible devices. Ion cutting is a generic process that can be employed to split and transfer fine monocrystalline layers from various crystals. Materials and engineering issues as well as our current understanding of the underlying physics involved in its application to cleaving thin layers from freestanding GaN, InP, and GaAs wafers are presented.

  12. Bioactive Compounds from Vitex leptobotrys#

    PubMed Central

    Pan, Wenhui; Liu, Kanglun; Guan, Yifu; Tan, Ghee Teng; Hung, Nguyen Van; Cuong, Nguyen Manh; Soejarto, D. Doel; Pezzuto, John M.; Fong, Harry H.S.; Zhang, Hongjie

    2014-01-01

    A new lignan, vitexkarinol (1), as well as a known lignan, neopaulownin (2), a known chalcone, 3-(4-hydroxyphenyl)-1-(2,4,6-trimethoxyphenyl)-2-propen-1-one (3), two known dehydroflavones, tsugafolin (4) and alpinetin (5), two known dipeptides, aurantiamide and aurantiamide acetate, a known sesquiterpene, vemopolyanthofuran, and five known carotenoid metabolites, vomifoliol, dihydrovomifoliol, dehydrovomifoliol, loliolide and isololiolide, were isolated from the leaves and twigs of Vitex leptobotrys through bioassay-guided fractionation. The chalcone (3) was found to inhibit HIV-1 replication by 77% at 15.9 µM, and the two dehydroflavones (4 and 5) showed weak anti-HIV activity with IC50 values of 118 and 130 µM, respectively, while being devoid of cytotoxicity at 150 µM. A chlorophyll-enriched fraction of V. leptobotrys, containing pheophorbide a, was found to inhibit the replication of HIV-1 by 80% at a concentration of 10 µg/mL. Compounds 1 and 3 were further selected to be evaluated against 21 viral targets available at NIAID (National Institute of Allergy and Infectious Diseases, National Institutes of Health, Bethesda, MD). PMID:24404757

  13. Superconducting compounds and alloys research

    NASA Technical Reports Server (NTRS)

    Otto, G.

    1975-01-01

    Resistivity measurements as a function of temperature were performed on alloys of the binary material system In sub(1-x) Bi sub x for x varying between 0 and 1. It was found that for all single-phase alloys (the pure elements, alpha-In, and the three intermetallic compounds) at temperatures sufficiently above the Debye-temperature, the resistivity p can be expressed as p = a sub o T(n), where a sub o and n are composition-dependent constants. The same exponential relationship can also be applied for the sub-system In-In2Bi, when the two phases are in compositional equilibrium. Superconductivity measurements on single and two-phase alloys can be explained with respect to the phase diagram. There occur three superconducting phases (alpha-In, In2Bi, and In5Bi3) with different transition temperatures in the alloying system. The magnitude of the transition temperatures for the various intermetallic phases of In-Bi is such that the disappearance or occurrence of a phase in two component alloys can be demonstrated easily by means of superconductivity measurements.

  14. Compound semiconductor surfaces and interfaces

    NASA Astrophysics Data System (ADS)

    Wilmsen, C. W.

    All semiconductor devices and integrated circuits require dielectric layers for interconnect isolation, gate oxides, passivation, etc. Thermally grown SiO2 is the primary dielectric film for silicon technology. This ONR contract investigated the chemistry and electrical properties of the interface between III-V compound semiconductors and electrical properties of grown and deposited oxides. When this study began, very little was known about these oxides or their interfaces. The results of the research supported by this contract has added substantially to the fundamental understanding of the oxide growth, properties and electronic structure. Much of the experimental work was obtained with surface analytical techniques and significant contributions were also made in this field. The original ONR contract began in October 1975 and initially concentrated on the grown oxides of InP and GaAs. This work evolved over the years to include the study of deposited insulator/InP interfaces and trapping at the interface. The ONR contract has supported the publication of 31 journal articles and book chapters and numerous conference presentations.

  15. Organic electronic devices using phthalimide compounds

    DOEpatents

    Hassan, Azad M.; Thompson, Mark E.

    2010-09-07

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  16. Organic electronic devices using phthalimide compounds

    DOEpatents

    Hassan, Azad M.; Thompson, Mark E.

    2013-03-19

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  17. Organic electronic devices using phthalimide compounds

    DOEpatents

    Hassan, Azad M.; Thompson, Mark E.

    2012-10-23

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  18. Antibacterial and Antifungal Compounds from Marine Fungi

    PubMed Central

    Xu, Lijian; Meng, Wei; Cao, Cong; Wang, Jian; Shan, Wenjun; Wang, Qinggui

    2015-01-01

    This paper reviews 116 new compounds with antifungal or antibacterial activities as well as 169 other known antimicrobial compounds, with a specific focus on January 2010 through March 2015. Furthermore, the phylogeny of the fungi producing these antibacterial or antifungal compounds was analyzed. The new methods used to isolate marine fungi that possess antibacterial or antifungal activities as well as the relationship between structure and activity are shown in this review. PMID:26042616

  19. Antibacterial and antifungal compounds from marine fungi.

    PubMed

    Xu, Lijian; Meng, Wei; Cao, Cong; Wang, Jian; Shan, Wenjun; Wang, Qinggui

    2015-06-02

    This paper reviews 116 new compounds with antifungal or antibacterial activities as well as 169 other known antimicrobial compounds, with a specific focus on January 2010 through March 2015. Furthermore, the phylogeny of the fungi producing these antibacterial or antifungal compounds was analyzed. The new methods used to isolate marine fungi that possess antibacterial or antifungal activities as well as the relationship between structure and activity are shown in this review.

  20. Complex fragment emission from hot compound nuclei

    SciTech Connect

    Moretto, L.G.

    1986-03-01

    The experimental evidence for compound nucleus emission of complex fragments at low energies is used to interpret the emission of the same fragments at higher energies. The resulting experimental picture is that of highly excited compound nuclei formed in incomplete fusion processes which decay statistically. In particular, complex fragments appear to be produced mostly through compound nucleus decay. In the appendix a geometric-kinematic theory for incomplete fusion and the associated momentum transfer is outlined. 10 refs., 19 figs.

  1. High performance compound semiconductor SPAD arrays

    NASA Astrophysics Data System (ADS)

    Harmon, Eric S.; Naydenkov, Mikhail; Bowling, Jared

    2016-05-01

    Aggregated compound semiconductor single photon avalanche diode (SPAD) arrays are emerging as a viable alternative to the silicon photomultiplier (SiPM). Compound semiconductors have the potential to surpass SiPM performance, potentially achieving orders of magnitude lower dark count rates and improved radiation hardness. New planar processing techniques have been developed to enable compound semiconductor SPAD devices to be produced with pixel pitches of 11 - 25 microns, with thousands of SPADs per array.

  2. Thread-compound test procedures being developed

    SciTech Connect

    Wood, F.; Dairymple, D. ); McKown, K.; Matthews, B. )

    1990-09-10

    API is planning to issue a new bulletin that will outline standardization test procedures and set minimum performance for thread compounds used on OCTG (oil country tubular goods) connections with API thread forms. These performance standards will replace the recommended compound described in API Bulletin 5A2. This paper discusses how the proposed bulletin will detail test equipment, procedures, and performance requirements for thread compounds.

  3. Response of Bioluminescent Bacteria to Alkyltin Compounds.

    DTIC Science & Technology

    1987-12-01

    found in the butyltiri series of compounds; tributyltin was (’Stimes more toxic than dibutyltin and (- 50 times more toxic than (mono)butyltin. When...correlations between compounds, tributyltin was -35 tine more Kicrotxit and fish bLoessays for pure toxic than dibutyltin end -750 times More compounds and...alkyltin " trihalides. Figure 4. Mo values for butyltin tri- D~kyflS chloride, dibutyltin dichloride tributyl- tin chloride and tatrabutyltin. Figures 5, 6

  4. Oxygen stabilized zirconium vanadium intermetallic compound

    DOEpatents

    Mendelsohn, Marshall H.; Gruen, Dieter M.

    1982-01-01

    An oxygen stabilized intermetallic compound having the formula Zr.sub.x OV.sub.y where x=0.7 to 2.0 and y=0.18 to 0.33. The compound is capable of reversibly sorbing hydrogen at temperatures from -196.degree. C. to 450.degree. C. at pressures down to 10.sup.-6 Torr. The compound is also capable of selectively sorbing hydrogen from gaseous mixtures in the presence of CO and CO.sub.2.

  5. Computed structures of polyimides model compounds

    NASA Technical Reports Server (NTRS)

    Tai, H.; Phillips, D. H.

    1990-01-01

    Using a semi-empirical approach, a computer study was made of 8 model compounds of polyimides. The compounds represent subunits from which NASA Langley Research Center has successfully synthesized polymers for aerospace high performance material application, including one of the most promising, LARC-TPI polymer. Three-dimensional graphic display as well as important molecular structure data pertaining to these 8 compounds are obtained.

  6. Statistical Theory of Compound-Nuclear Reactions

    SciTech Connect

    Weidenmueller, H. A.

    2008-04-17

    The Hauser-Feshbach formula for the average compound-nucleus cross section formalizes Bohr's hypothesis of the independence of formation and decay of the compound nucleus. The statistical theory of compound-nuclear reactions aims at establishing the domain and limits of applicability of that formula and of Ericson's model for statistical cross section fluctuations using random-matrix theory as a starting point. I discuss the present status of that program, including the treatment of direct reactions.

  7. PLUTONIUM COMPOUNDS AND PROCESS FOR THEIR PREPARATION

    DOEpatents

    Wolter, F.J.; Diehl, H.C. Jr.

    1958-01-01

    This patent relates to certain new compounds of plutonium, and to the utilization of these compounds to effect purification or separation of the plutonium. The compounds are organic chelate compounds consisting of tetravalent plutonium together with a di(salicylal) alkylenediimine. These chelates are soluble in various organic solvents, but not in water. Use is made of this property in extracting the plutonium by contacting an aqueous solution thereof with an organic solution of the diimine. The plutonium is chelated, extracted and effectively separated from any impurities accompaying it in the aqueous phase.

  8. Marine bacterial sources of bioactive compounds.

    PubMed

    Jaiganesh, R; Sampath Kumar, N S

    2012-01-01

    Thousands of novel compounds have been isolated from various marine bacteria and tested for pharmacological properties, many of which are commercially available. Many more are being tested as potential bioactive compound at the preclinical and clinical stages. The growing interest in marine-derived antiviral compounds, along with the development of new technology in marine cultures and extraction, will significantly expedite the current exploration of the marine environment for compounds with significant pharmacological applications, which will continue to be a promising strategy and new trend for modern medicine. Marine actinomycetes and cyanobacteria are a prolific but underexploited source for the discovery of novel secondary metabolites.

  9. Hydrodesulfurization catalyst by Chevrel phase compounds

    DOEpatents

    McCarty, K.F.; Schrader, G.L.

    1985-05-20

    A process is disclosed for the hydrodesulfurization of sulfur-containing hydrocarbon fuel with reduced ternary molybdenum sulfides, known as Chevrel phase compounds. Chevrel phase compounds of the general composition M/sub x/Mo/sub 6/S/sub 8/, with M being Ho, Pb, Sn, Ag, In, Cu, Fe, Ni, or Co, were found to have hydrodesulfurization activities comparable to model unpromoted and cobalt-promoted MoS/sub 2/ catalysts. The most active catalysts were the ''large'' cation compounds (Ho, Pb, Sn), and the least active catalysts were the ''small'' cation compounds (Cu, Fe, Ni, Co.).

  10. Hydrodesulfurization catalysis by Chevrel phase compounds

    DOEpatents

    McCarty, Kevin F.; Schrader, Glenn L.

    1985-12-24

    A process is disclosed for the hydrodesulfurization of sulfur-containing hydrocarbon fuel with reduced ternary molybdenum sulfides, known as Chevrel phase compounds. Chevrel phase compounds of the general composition M.sub.x Mo.sub.6 S.sub.8, with M being Ho, Pb, Sn, Ag, In, Cu, Fe, Ni, or Co, were found to have hydrodesulfurization activities comparable to model unpromoted and cobalt-promoted MoS.sub.2 catalysts. The most active catalysts were the "large" cation compounds (Ho, Pb, Sn), and the least active catalysts were the "small" cation compounds (Cu, Fe, Ni, Co.).

  11. Antimicrobial Action of Compounds from Marine Seaweed.

    PubMed

    Pérez, María José; Falqué, Elena; Domínguez, Herminia

    2016-03-09

    Seaweed produces metabolites aiding in the protection against different environmental stresses. These compounds show antiviral, antiprotozoal, antifungal, and antibacterial properties. Macroalgae can be cultured in high volumes and would represent an attractive source of potential compounds useful for unconventional drugs able to control new diseases or multiresistant strains of pathogenic microorganisms. The substances isolated from green, brown and red algae showing potent antimicrobial activity belong to polysaccharides, fatty acids, phlorotannins, pigments, lectins, alkaloids, terpenoids and halogenated compounds. This review presents the major compounds found in macroalga showing antimicrobial activities and their most promising applications.

  12. Four new compounds from Imperata cylindrica.

    PubMed

    Liu, Xuan; Zhang, Bin-Feng; Yang, Li; Chou, Gui-Xin; Wang, Zheng-Tao

    2014-04-01

    Four new compounds, impecylone (1), deacetylimpecyloside (2), seguinoside K 4-methylether (3) and impecylenolide (4), were isolated from Imperata cylindrica along with two known compounds, impecyloside (5) and seguinoside K (6). Their structures were elucidated mainly by spectroscopic analyses including 1D- and 2D-NMR techniques, and the absolute configuration of 1 was confirmed by X-ray diffraction analysis. In calcium assay, the result indicated that compounds 1, 2, 4 and 5 cannot obviously inhibit the calcium peak value compared with the negative control, and suggested that the four compounds could not have anti-inflammatory activity.

  13. Neurotoxicity of fragrance compounds: A review.

    PubMed

    Pinkas, Adi; Gonçalves, Cinara Ludvig; Aschner, Michael

    2017-10-01

    Fragrance compounds are chemicals belonging to one of several families, which are used frequently and globally in cosmetics, household products, foods and beverages. A complete list of such compounds is rarely found on the ingredients-list of such products, as "fragrance mixtures" are defined as "trade secrets" and thus protected by law. While some information regarding the general toxicity of some of these compounds is available, their neurotoxicity is known to a lesser extent. Here, we discuss the prevalence and neurotoxicity of fragrance compounds belonging to the three most common groups: phthalates, synthetic musks and chemical sensitizers. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Automated compound classification using a chemical ontology

    PubMed Central

    2012-01-01

    Background Classification of chemical compounds into compound classes by using structure derived descriptors is a well-established method to aid the evaluation and abstraction of compound properties in chemical compound databases. MeSH and recently ChEBI are examples of chemical ontologies that provide a hierarchical classification of compounds into general compound classes of biological interest based on their structural as well as property or use features. In these ontologies, compounds have been assigned manually to their respective classes. However, with the ever increasing possibilities to extract new compounds from text documents using name-to-structure tools and considering the large number of compounds deposited in databases, automated and comprehensive chemical classification methods are needed to avoid the error prone and time consuming manual classification of compounds. Results In the present work we implement principles and methods to construct a chemical ontology of classes that shall support the automated, high-quality compound classification in chemical databases or text documents. While SMARTS expressions have already been used to define chemical structure class concepts, in the present work we have extended the expressive power of such class definitions by expanding their structure-based reasoning logic. Thus, to achieve the required precision and granularity of chemical class definitions, sets of SMARTS class definitions are connected by OR and NOT logical operators. In addition, AND logic has been implemented to allow the concomitant use of flexible atom lists and stereochemistry definitions. The resulting chemical ontology is a multi-hierarchical taxonomy of concept nodes connected by directed, transitive relationships. Conclusions A proposal for a rule based definition of chemical classes has been made that allows to define chemical compound classes more precisely than before. The proposed structure-based reasoning logic allows to translate

  15. Diazo Compounds: Versatile Tools for Chemical Biology.

    PubMed

    Mix, Kalie A; Aronoff, Matthew R; Raines, Ronald T

    2016-12-16

    Diazo groups have broad and tunable reactivity. That and other attributes endow diazo compounds with the potential to be valuable reagents for chemical biologists. The presence of diazo groups in natural products underscores their metabolic stability and anticipates their utility in a biological context. The chemoselectivity of diazo groups, even in the presence of azido groups, presents many opportunities. Already, diazo compounds have served as chemical probes and elicited novel modifications of proteins and nucleic acids. Here, we review advances that have facilitated the chemical synthesis of diazo compounds, and we highlight applications of diazo compounds in the detection and modification of biomolecules.

  16. Antimicrobial Action of Compounds from Marine Seaweed

    PubMed Central

    Pérez, María José; Falqué, Elena; Domínguez, Herminia

    2016-01-01

    Seaweed produces metabolites aiding in the protection against different environmental stresses. These compounds show antiviral, antiprotozoal, antifungal, and antibacterial properties. Macroalgae can be cultured in high volumes and would represent an attractive source of potential compounds useful for unconventional drugs able to control new diseases or multiresistant strains of pathogenic microorganisms. The substances isolated from green, brown and red algae showing potent antimicrobial activity belong to polysaccharides, fatty acids, phlorotannins, pigments, lectins, alkaloids, terpenoids and halogenated compounds. This review presents the major compounds found in macroalga showing antimicrobial activities and their most promising applications. PMID:27005637

  17. INVESTIGATION OF A COMPOUND REPORTED AS BOTH FERRIMAGNETIC AND FERROELECTRIC,

    DTIC Science & Technology

    FERRITES , *FERROELECTRIC CRYSTALS, MAGNETIC PROPERTIES, X RAY DIFFRACTION, IMPURITIES, FERROELECTRICITY, FERROMAGNETISM, CRYSTAL STRUCTURE...DIELECTRIC PROPERTIES, MICROSCOPY, BARIUM COMPOUNDS, SAMARIUM COMPOUNDS, NIOBIUM COMPOUNDS, TITANIUM COMPOUNDS, TITANATES, PHOTOMICROGRAPHY, CRYSTAL LATTICES, OXIDES.

  18. Prioritizing pesticide compounds for analytical methods development

    USGS Publications Warehouse

    Norman, Julia E.; Kuivila, Kathryn; Nowell, Lisa H.

    2012-01-01

    The U.S. Geological Survey (USGS) has a periodic need to re-evaluate pesticide compounds in terms of priorities for inclusion in monitoring and studies and, thus, must also assess the current analytical capabilities for pesticide detection. To meet this need, a strategy has been developed to prioritize pesticides and degradates for analytical methods development. Screening procedures were developed to separately prioritize pesticide compounds in water and sediment. The procedures evaluate pesticide compounds in existing USGS analytical methods for water and sediment and compounds for which recent agricultural-use information was available. Measured occurrence (detection frequency and concentrations) in water and sediment, predicted concentrations in water and predicted likelihood of occurrence in sediment, potential toxicity to aquatic life or humans, and priorities of other agencies or organizations, regulatory or otherwise, were considered. Several existing strategies for prioritizing chemicals for various purposes were reviewed, including those that identify and prioritize persistent, bioaccumulative, and toxic compounds, and those that determine candidates for future regulation of drinking-water contaminants. The systematic procedures developed and used in this study rely on concepts common to many previously established strategies. The evaluation of pesticide compounds resulted in the classification of compounds into three groups: Tier 1 for high priority compounds, Tier 2 for moderate priority compounds, and Tier 3 for low priority compounds. For water, a total of 247 pesticide compounds were classified as Tier 1 and, thus, are high priority for inclusion in analytical methods for monitoring and studies. Of these, about three-quarters are included in some USGS analytical method; however, many of these compounds are included on research methods that are expensive and for which there are few data on environmental samples. The remaining quarter of Tier 1

  19. A[subscript 2]: Element or Compound?

    ERIC Educational Resources Information Center

    Stains, Marilyne; Talanquer, Vicente

    2007-01-01

    Particulate questions were used to investigate the strength of the mental association between the concept of compound and microscopic representations of molecules in students with different levels of chemistry preparation. The results have suggested that the mental association between the concepts of compound and particulate representations of…

  20. VOLATILE ORGANIC COMPOUNDS (VOCS) CHAPTER 31.

    EPA Science Inventory

    The term "volatile organic compounds' (VOCs) was originally coined to refer, as a class, to carbon-containing chemicals that participate in photochemical reactions in the ambient (outdoor) are. The regulatory definition of VOCs used by the U.S. EPA is: Any compound of carbon, ex...

  1. Semantics vs Pragmatics of a Compound Word

    ERIC Educational Resources Information Center

    Smirnova, Elena A.; Biktemirova, Ella I.; Davletbaeva, Diana N.

    2016-01-01

    This paper is devoted to the study of correlation between semantic and pragmatic potential of a compound word, which functions in informal speech, and the mechanisms of secondary nomination, which realizes the potential of semantic-pragmatic features of colloquial compounds. The relevance and the choice of the research question is based on the…

  2. Two new compounds from Ganoderma lucidum.

    PubMed

    Wang, Xin-Fang; Yan, Yong-Ming; Wang, Xin-Long; Ma, Xiu-Jing; Fu, Xue-Yan; Cheng, Yong-Xian

    2015-01-01

    Two pairs of new enantiomers, lucidulactones A and B (1 and 2), and two known compounds were isolated from Ganoderma lucidum. Their structures were determined by means of spectroscopic methods. The chiral HPLC was used to separate the ( - )- and (+)-antipodes of the new compounds.

  3. [Organisms producing hypolipidemic compounds with antioxidant activity].

    PubMed

    Puzhevskaia, T O; Grammatikova, N E; Bibikova, M V; Katlinskiĭ, A V

    2009-01-01

    Complex compounds produced by fungal cultures of Lecanicilium and Beauveria with both high hypolipidemic and antioxydant activities were screened. Two fractions of the hypolipipidemic compounds with antioxidant activity of 95 and 75% in a dose of 25 mcg/ml were isolated.

  4. Hybrid Compounding in New Zealand English

    ERIC Educational Resources Information Center

    Degani, Marta; Onysko, Alexander

    2010-01-01

    This study investigates hybrid compound formation of Maori and English terms in present day New Zealand English (NZE). On the background of Maori and English language contact, the phenomenon of hybrid compounding emerges as a process that, on the one hand, symbolizes the vitality of the Maori element in NZE and, on the other hand, marks the…

  5. Heterogeneous photocatalytic reactions of sulfur aromatic compounds.

    PubMed

    Samokhvalov, Alexander

    2011-11-18

    Sulfur aromatic compounds, such as mono-, di-, tri-, and tetraalkyl-substituted thiophene, benzothiophenes, dibenzothiophenes, are the molecular components of many fossils (petroleum, oil shale, tar sands, bitumen). Structural units of natural, cross-linked heteroaromatic polymers present in brown coals, turf, and soil are similar to those of sulfur aromatic compounds. Many sulfur aromatic compounds are found in the streams of petroleum refining and upgrading (naphthas, gas oils) and in the consumer products (gasoline, diesel, jet fuels, heating fuels). Besides fossils, the structural fragments of sulfur aromatic compounds are present in molecules of certain organic semiconductors, pesticides, small molecule drugs, and in certain biomolecules present in human body (pheomelanin pigments). Photocatalysis is the frontier area of physical chemistry that studies chemical reactions initiated by absorption of photons by photocatalysts, that is, upon electronic rather than thermal activation, under "green" ambient conditions. This review provides systematization and critical review of the fundamental chemical and physicochemical information on heterogeneous photocatalysis of sulfur aromatic compounds accumulated in the last 20-30 years. Specifically, the following topics are covered: physicochemical properties of sulfur aromatic compounds, major classes of heterogeneous photocatalysts, mechanisms and reactive intermediates of photocatalytic reactions of sulfur aromatic compounds, and the selectivity of these reactions. Quantum chemical calculations of properties and structures of sulfur aromatic compounds, their reactive intermediates, and the structure of adsorption complexes formed on the surface of the photocatalysts are also discussed.

  6. Phenolic compounds of three unconventional Sudanese oils.

    PubMed

    Mariod, Abdalbasit; Matthäus, Bertrand; Eichner, Karl; Hussein, Ismail H

    2015-01-01

    The total amount and content of phenolic and flavonoid compounds using the Folin-Ciocalteu and Aluminum chloride methods of the methanolic extracts of Sclerocarya birrea oil (SCO), Melon bug oil (MBO), and Sorghum bug oil (SBO) were studied. Dry samples of Sclerocarya birrea, Aspongopus vidiuatus and Agonoscelis pubescens were used in this study. The oil was extracted using n-hexane following AOCS method. The phenolic compounds were extracted following a well known method and the total amounts of phenolic and flavonoids were determined using Folin-Ciocalteau and aluminum chloride methods, respectively and were identified by HPLC. The concentration of total phenolic compounds was determined as 3.3, 20.7 and 0.9 mg/100 g oil, in SCO, MBO and SBO, respectively, calculated as gallic acid equivalents. The polar fraction of the three oils was separated using solid phase extraction method. The variation of simple and complex oils phenols studied by high-performance liquid chromatography with diode-array detection (DAD) using sephadex eluted by acetone revealed six phenolic compounds which were identified as vanillic acid, callistephin, sinapic acid, t-cinnamic acid, epicatechin, and luteolin in SCO, and four phenolic compounds were identified as vanillin, sinapic acid, o-coumaric acid, and quercetin, in SBO, while in MBO four phenolic compounds were identified as t-cinnamic, syringic acid, quercetin and pelargonin. The phenolic compounds found in SCO, SBO, and MBO can be divided into phenolic compounds and flavonoids.

  7. Perfluorinated Compounds: Emerging POPs with Potential Immunotoxicity

    EPA Science Inventory

    Perfluorinated compounds (PFCs) have been recognized as an important class of environmental contaminants commonly detected in blood samples of both wildlife and humans. These compounds have been in use for more than 60 years as surface treatment chemicals, polymerization aids, an...

  8. Nitroaromatic Compounds, from Synthesis to Biodegradation

    PubMed Central

    Ju, Kou-San; Parales, Rebecca E.

    2010-01-01

    Summary: Nitroaromatic compounds are relatively rare in nature and have been introduced into the environment mainly by human activities. This important class of industrial chemicals is widely used in the synthesis of many diverse products, including dyes, polymers, pesticides, and explosives. Unfortunately, their extensive use has led to environmental contamination of soil and groundwater. The nitro group, which provides chemical and functional diversity in these molecules, also contributes to the recalcitrance of these compounds to biodegradation. The electron-withdrawing nature of the nitro group, in concert with the stability of the benzene ring, makes nitroaromatic compounds resistant to oxidative degradation. Recalcitrance is further compounded by their acute toxicity, mutagenicity, and easy reduction into carcinogenic aromatic amines. Nitroaromatic compounds are hazardous to human health and are registered on the U.S. Environmental Protection Agency's list of priority pollutants for environmental remediation. Although the majority of these compounds are synthetic in nature, microorganisms in contaminated environments have rapidly adapted to their presence by evolving new biodegradation pathways that take advantage of them as sources of carbon, nitrogen, and energy. This review provides an overview of the synthesis of both man-made and biogenic nitroaromatic compounds, the bacteria that have been identified to grow on and completely mineralize nitroaromatic compounds, and the pathways that are present in these strains. The possible evolutionary origins of the newly evolved pathways are also discussed. PMID:20508249

  9. Compounds from the roots of Jasminum sambac.

    PubMed

    Zeng, Lin-Hong; Hu, Min; Yan, Yong-Ming; Lu, Qing; Cheng, Yong-Xian

    2012-01-01

    Four new compounds (+)-jasminoids A, B, C, and D, together with seven known compounds, were isolated from the roots of Jasminum sambac. Their structures were identified using spectroscopic methods. This study provides a better understanding to the chemical composition of J. sambac roots that have been thought to be one ingredient of an ancient prescription 'Ma-Fei-San'.

  10. Study of Compounds for Activity against Leishmania

    DTIC Science & Technology

    1994-03-27

    Comparative Antileishmanial Activity of Selected Compounds Against Leishmania Leishmania donovani and Leishmania Viannia braziliensis 7 IV. Zn vitro...Studies of Oligonucleotides Against Leishmania Leishmania donovani ............................................................ 9 Discussion...for several years in studies to identify new compounds for antileishmanial activity against both visceral (Lelshmania Leishmania donovani ) and

  11. Perfluorinated Compounds: Emerging POPs with Potential Immunotoxicity

    EPA Science Inventory

    Perfluorinated compounds (PFCs) have been recognized as an important class of environmental contaminants commonly detected in blood samples of both wildlife and humans. These compounds have been in use for more than 60 years as surface treatment chemicals, polymerization aids, an...

  12. Amino acid modifiers in guayule rubber compounds

    USDA-ARS?s Scientific Manuscript database

    Tire producers are increasingly interested in biobased materials, including rubber but also as compounding chemicals. An alternative natural rubber for tire use is produced by guayule, a woody desert shrub native to North America. Alternative compounding chemicals include naturally-occurring amino a...

  13. Nitroaromatic compounds, from synthesis to biodegradation.

    PubMed

    Ju, Kou-San; Parales, Rebecca E

    2010-06-01

    Nitroaromatic compounds are relatively rare in nature and have been introduced into the environment mainly by human activities. This important class of industrial chemicals is widely used in the synthesis of many diverse products, including dyes, polymers, pesticides, and explosives. Unfortunately, their extensive use has led to environmental contamination of soil and groundwater. The nitro group, which provides chemical and functional diversity in these molecules, also contributes to the recalcitrance of these compounds to biodegradation. The electron-withdrawing nature of the nitro group, in concert with the stability of the benzene ring, makes nitroaromatic compounds resistant to oxidative degradation. Recalcitrance is further compounded by their acute toxicity, mutagenicity, and easy reduction into carcinogenic aromatic amines. Nitroaromatic compounds are hazardous to human health and are registered on the U.S. Environmental Protection Agency's list of priority pollutants for environmental remediation. Although the majority of these compounds are synthetic in nature, microorganisms in contaminated environments have rapidly adapted to their presence by evolving new biodegradation pathways that take advantage of them as sources of carbon, nitrogen, and energy. This review provides an overview of the synthesis of both man-made and biogenic nitroaromatic compounds, the bacteria that have been identified to grow on and completely mineralize nitroaromatic compounds, and the pathways that are present in these strains. The possible evolutionary origins of the newly evolved pathways are also discussed.

  14. Hybrid Compounding in New Zealand English

    ERIC Educational Resources Information Center

    Degani, Marta; Onysko, Alexander

    2010-01-01

    This study investigates hybrid compound formation of Maori and English terms in present day New Zealand English (NZE). On the background of Maori and English language contact, the phenomenon of hybrid compounding emerges as a process that, on the one hand, symbolizes the vitality of the Maori element in NZE and, on the other hand, marks the…

  15. (CHINA) PERFLUORINATED ORGANIC COMPOUND EXPOSURE ASSESSMENT RESEARCH

    EPA Science Inventory

    A wide range of perfluorinated organic compounds (PFCs) has been used in a variety of industrial processes and consumer products. The most commonly studied PFCs include perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), but there are many more compounds in this c...

  16. PERFLUORINATED ORGANIC COMPOUND EXPOSURE ASSESSMENT RESEARCH

    EPA Science Inventory

    A wide range of perfluorinated organic compounds (PFCs) has been used in a variety of industrial processes and consumer products. The most commonly studied PFCs include perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), but there are many more compounds in this c...

  17. Crystal structure analysis of intermetallic compounds

    NASA Technical Reports Server (NTRS)

    Conner, R. A., Jr.; Downey, J. W.; Dwight, A. E.

    1968-01-01

    Study concerns crystal structures and lattice parameters for a number of new intermetallic compounds. Crystal structure data have been collected on equiatomic compounds, formed between an element of the Sc, Ti, V, or Cr group and an element of the Co or Ni group. The data, obtained by conventional methods, are presented in an easily usable tabular form.

  18. Improved process for synthesizing anilinosilane compounds

    NASA Technical Reports Server (NTRS)

    Dunnavant, W. R.; Markle, R. A.

    1970-01-01

    New process gives good yields of anilinosilane compounds that can be readily isolated in a high state of purity. S-collidine is used as an HCl acceptor. Silane compounds can be melt-condensed with aromatic diols to provide high molecular weight polyaryloxysilane materials that are of importance in polymer technology.

  19. Analysis of phenolic compounds for poultry feeds

    USDA-ARS?s Scientific Manuscript database

    Phenolic compounds have generated significant interest recently as feed additives that can impart bioactive characteristics such as anti-oxidant, anti-microbial, and anti-fungal properties to a feed formulation [1-2]. Such natural compounds may offer some preventive benefit to the routine administra...

  20. A[subscript 2]: Element or Compound?

    ERIC Educational Resources Information Center

    Stains, Marilyne; Talanquer, Vicente

    2007-01-01

    Particulate questions were used to investigate the strength of the mental association between the concept of compound and microscopic representations of molecules in students with different levels of chemistry preparation. The results have suggested that the mental association between the concepts of compound and particulate representations of…

  1. Ambient Air Monitoring for Sulfur Compounds

    ERIC Educational Resources Information Center

    Forrest, Joseph; Newman, Leonard

    1973-01-01

    A literature review of analytical techniques available for the study of compounds at low concentrations points up some of the areas where further research is needed. Compounds reviewed are sulfur dioxide, sulfuric acid, ammonium sulfate and bisulfate, metal sulfates, hydrogen sulfide, and organic sulfides. (BL)

  2. Exploring marine resources for bioactive compounds.

    PubMed

    Kiuru, Paula; DʼAuria, M Valeria; Muller, Christian D; Tammela, Päivi; Vuorela, Heikki; Yli-Kauhaluoma, Jari

    2014-09-01

    Biodiversity in the seas is only partly explored, although marine organisms are excellent sources for many industrial products. Through close co-operation between industrial and academic partners, it is possible to successfully collect, isolate and classify marine organisms, such as bacteria, fungi, micro- and macroalgae, cyanobacteria, and marine invertebrates from the oceans and seas globally. Extracts and purified compounds of these organisms can be studied for several therapeutically and industrially significant biological activities, including anticancer, anti-inflammatory, antiviral, antibacterial, and anticoagulant activities by applying a wide variety of screening tools, as well as for ion channel/receptor modulation and plant growth regulation. Chromatographic isolation of bioactive compounds will be followed by structural determination. Sustainable cultivation methods for promising organisms and biotechnological processes for selected compounds can be developed, as well as biosensors for monitoring the target compounds. The (semi)synthetic modification of marine-based bioactive compounds produces their new derivatives, structural analogs and mimetics that could serve as hit or lead compounds and be used to expand compound libraries based on marine natural products. The research innovations can be targeted for industrial product development in order to improve the growth and productivity of marine biotechnology. Marine research aims at a better understanding of environmentally conscious sourcing of marine biotechnology products and increased public awareness of marine biodiversity. Marine research is expected to offer novel marine-based lead compounds for industries and strengthen their product portfolios related to pharmaceutical, nutraceutical, cosmetic, agrochemical, food processing, material and biosensor applications.

  3. VOLATILE ORGANIC COMPOUNDS (VOCS) CHAPTER 31.

    EPA Science Inventory

    The term "volatile organic compounds' (VOCs) was originally coined to refer, as a class, to carbon-containing chemicals that participate in photochemical reactions in the ambient (outdoor) are. The regulatory definition of VOCs used by the U.S. EPA is: Any compound of carbon, ex...

  4. Three new phenolic compounds from Dalbergia odorifera.

    PubMed

    Wang, Hao; Dong, Wen-Hua; Zuo, Wen-Jian; Wang, Hui; Zhong, Hui-Min; Mei, Wen-Li; Dai, Hao-Fu

    2014-12-01

    Three new phenolic compounds (1-3) were isolated from the heartwood of Dalbergia odorifera T. Chen. (Leguminosae). Their structures were established based on spectroscopic methods including 1D and 2D NMR (HSQC, COSY, HMBC and ROESY). Compound 2 exhibited cytotoxicity against BEL-7402 tumor cell lines.

  5. Ambient Air Monitoring for Sulfur Compounds

    ERIC Educational Resources Information Center

    Forrest, Joseph; Newman, Leonard

    1973-01-01

    A literature review of analytical techniques available for the study of compounds at low concentrations points up some of the areas where further research is needed. Compounds reviewed are sulfur dioxide, sulfuric acid, ammonium sulfate and bisulfate, metal sulfates, hydrogen sulfide, and organic sulfides. (BL)

  6. A Cognitive Approach to English Nominal Compounds.

    ERIC Educational Resources Information Center

    Williams, Ray

    The ability of English as a second language (ESL) readers to comprehend different types of nominal compounds in English technical literature was investigated. College students were asked to recover the meaning of 73 nominal compounds in two technical English language articles on occupational health and safety. The intermediate and advanced ESL…

  7. PERFLUORINATED ORGANIC COMPOUND EXPOSURE ASSESSMENT RESEARCH

    EPA Science Inventory

    A wide range of perfluorinated organic compounds (PFCs) has been used in a variety of industrial processes and consumer products. The most commonly studied PFCs include perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), but there are many more compounds in this c...

  8. (CHINA) PERFLUORINATED ORGANIC COMPOUND EXPOSURE ASSESSMENT RESEARCH

    EPA Science Inventory

    A wide range of perfluorinated organic compounds (PFCs) has been used in a variety of industrial processes and consumer products. The most commonly studied PFCs include perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), but there are many more compounds in this c...

  9. Volatile organic compound emissions from silage systems

    USDA-ARS?s Scientific Manuscript database

    As a precursor to smog, emission of volatile organic compounds (VOCs) to the atmosphere is an environmental concern in some regions. The major source from farms is silage, with emissions coming from the silo face, mixing wagon, and feed bunk. The major compounds emitted are alcohols with other impor...

  10. A novel phenolic compound from Phyllanthus emblica.

    PubMed

    She, Gaimei; Cheng, Ruiyang; Sha, Lei; Xu, Yixia; Shi, Renbin; Zhang, Lanzhen; Guo, Yajian

    2013-04-01

    A new compound, mucic acid 3-O-gallate (1), was isolated from the fruit of Phyllanthus emblica L, together with 5 known compounds (2-6). Their structures were elucidated on the basis of spectroscopic analysis, including 1D and 2D NMR techniques, and by comparison with literature data.

  11. Compound estimation procedures in reliability

    NASA Technical Reports Server (NTRS)

    Barnes, Ron

    1990-01-01

    At NASA, components and subsystems of components in the Space Shuttle and Space Station generally go through a number of redesign stages. While data on failures for various design stages are sometimes available, the classical procedures for evaluating reliability only utilize the failure data on the present design stage of the component or subsystem. Often, few or no failures have been recorded on the present design stage. Previously, Bayesian estimators for the reliability of a single component, conditioned on the failure data for the present design, were developed. These new estimators permit NASA to evaluate the reliability, even when few or no failures have been recorded. Point estimates for the latter evaluation were not possible with the classical procedures. Since different design stages of a component (or subsystem) generally have a good deal in common, the development of new statistical procedures for evaluating the reliability, which consider the entire failure record for all design stages, has great intuitive appeal. A typical subsystem consists of a number of different components and each component has evolved through a number of redesign stages. The present investigations considered compound estimation procedures and related models. Such models permit the statistical consideration of all design stages of each component and thus incorporate all the available failure data to obtain estimates for the reliability of the present version of the component (or subsystem). A number of models were considered to estimate the reliability of a component conditioned on its total failure history from two design stages. It was determined that reliability estimators for the present design stage, conditioned on the complete failure history for two design stages have lower risk than the corresponding estimators conditioned only on the most recent design failure data. Several models were explored and preliminary models involving bivariate Poisson distribution and the

  12. Herbal Compounds and Toxins Modulating TRP Channels

    PubMed Central

    Vriens, Joris; Nilius, Bernd; Vennekens, Rudi

    2008-01-01

    Although the benefits are sometimes obvious, traditional or herbal medicine is regarded with skepticism, because the mechanism through which plant compounds exert their powers are largely elusive. Recent studies have shown however that many of these plant compounds interact with specific ion channels and thereby modulate the sensing mechanism of the human body. Especially members of the Transient Receptor Potential (TRP) channels have drawn large attention lately as the receptors for plant-derived compounds such as capsaicin and menthol. TRP channels constitute a large and diverse family of channel proteins that can serve as versatile sensors that allow individual cells and entire organisms to detect changes in their environment. For this family, a striking number of empirical views have turned into mechanism-based actions of natural compounds. In this review we will give an overview of herbal compounds and toxins, which modulate TRP channels. PMID:19305789

  13. Potent acetylcholinesterase inhibitory compounds from Myristica fragrans.

    PubMed

    Cuong, To Dao; Hung, Tran Manh; Han, Hyoung Yun; Roh, Hang Sik; Seok, Ji-Hyeon; Lee, Jong Kwon; Jeong, Ja Young; Choi, Jae Sue; Kim, Jeong Ah; Min, Byung Sun

    2014-04-01

    The anti-cholinesterase activity was evaluated of the ethyl acetate fraction of the methanol extract of Myristica fragrans Houtt (Myristicaceae) seeds and of compounds isolated from it by various chromatographic techniques. The chemical structures of the compounds were determined from spectroscopic analyses (NMR data). Thirteen compounds (1-13) were isolated and identified. Compound 8 { [(7S)-8'-(4'-hydroxy-3'-methoxyphenyl)-7-hydroxypropyl]benzene-2,4-diol) showed the most effective activity with an IC50 value of 35.1 microM, followed by compounds 2 [(8R,8'S)-7'-(3',4'-methylenedioxyphenyl)-8,8'-dimethyl-7-(3,4-dihydroxyphenyl)-butane] and 11 (malabaricone C) with IC50 values of 42.1 and 44.0 pM, respectively. This is the first report of significant anticholinesterase properties of M. fragrans seeds. The findings demonstrate that M. fragrans could be used beneficially in the treatment of Alzheimer's disease.

  14. Retention of Compounding Skills Among Pharmacy Students

    PubMed Central

    Eley, John G.; Birnie, Christine

    2006-01-01

    Objective To evaluate the competency of second-year pharmacy students to compound capsules from a prescription 12 months after completing a compounding course. Methods Students who completed the compounding course were given the same prescription they had been given 12 months earlier to compound metoprolol capsules. No warning of the second exercise was given and they were expected to prepare capsules and package and label the finished product. Performance was evaluated in an identical manner for both exercises based on the level of professional competency of a score of 80% or above. Results Eighty-seven percent fewer students achieved a score of 90% or more on the second exercise and 81% fewer students demonstrated the required competency. Conclusions Differences in scores on the first and second exercises indicate that pharmacy students’ level of competency and retention of knowledge with respect to compounding capsules is not adequately retained after a 12-month hiatus. PMID:17332858

  15. Odor-active compounds in cardboard.

    PubMed

    Czerny, Michael; Buettner, Andrea

    2009-11-11

    The odor-active compounds of cardboard were identified by aroma extract dilution analysis and HRGC-MS analysis. In total, 36 compounds were detected with medium to high intensities during HRGC-olfactometry. The highest odor intensities were evaluated for vanillin, (E)-non-2-enal, (R/S)-gamma-nonalactone, 2-methoxyphenol, (R/S)-delta-decalactone, p-anisaldehyde, 3-propylphenol, and a woody-smelling unknown compound. Most of the identified compounds were described as odor-active cardboard constituents for the first time. Sensory experiments demonstrated that extensive release of odor-active compounds occurred upon moistening of the cardboard. Accordingly, data indicated that the odorants are present in cardboard in relatively high amounts. In a further sensory study, a transfer of the released odor to food was demonstrated in a model experiment showing that cardboards with high odor potential can cause unwanted flavor changes in foods.

  16. Methods of making organic compounds by metathesis

    DOEpatents

    Abraham, Timothy W.; Kaido, Hiroki; Lee, Choon Woo; Pederson, Richard L.; Schrodi, Yann; Tupy, Michael John

    2015-09-01

    Described are methods of making organic compounds by metathesis chemistry. The methods of the invention are particularly useful for making industrially-important organic compounds beginning with starting compositions derived from renewable feedstocks, such as natural oils. The methods make use of a cross-metathesis step with an olefin compound to produce functionalized alkene intermediates having a pre-determined double bond position. Once isolated, the functionalized alkene intermediate can be self-metathesized or cross-metathesized (e.g., with a second functionalized alkene) to produce the desired organic compound or a precursor thereto. The method may be used to make bifunctional organic compounds, such as diacids, diesters, dicarboxylate salts, acid/esters, acid/amines, acid/alcohols, acid/aldehydes, acid/ketones, acid/halides, acid/nitriles, ester/amines, ester/alcohols, ester/aldehydes, ester/ketones, ester/halides, ester/nitriles, and the like.

  17. The natural production of organobromine compounds.

    PubMed

    Gribble, G W

    2000-03-01

    Organobromine chemicals are produced naturally by an array of biological and other chemical processes in our environment. Some of these compounds are identical to man-made organobromine compounds, such as methyl bromide, bromoform, and bromophenols, but many others are entirely new moleclar entities, often possessing extraordinary and important biological properties. Although only a few natural organobromine compounds had been discovered up to 1968, this number as of early 1999 is more than 1,600, and new examples are being discovered continually. Organobromine compounds are produced naturally by marine creatures (sponges, corals, sea slugs, tunicates, sea fans) and seaweed, plants, fungi, lichen, algae, bacteria, microbes, and some mammals. Many of these organobromine compounds are used in chemical defense, to facilitate food gathering, or as hormones.

  18. Use of model compounds in coal chemistry

    SciTech Connect

    Collins, C J

    1980-01-01

    The use of model compounds in coal chemistry has been summarized. Several examples from the literature, and also from work at Oak Ridge National Laboratory have been used to illustrate the main principles involved. The current controversy on the subject of model compounds is believed to stem from a semantic misunderstanding owing to different definitions of what a model compound is. The definition of a model compound from the organic chemist's point of view is that it is a substance which may possess at least one property or structural feature suspected of being present in the sample investigated. The sample may be coal itself, a maceral, a coal-derived material or a hydrogen-donor solvent. It is stressed that a recognition of the structure-reactivity relationship in organic compounds is necessary to avoid false conclusions.

  19. Thiophenic Sulfur Compounds Released During Coal Pyrolysis

    PubMed Central

    Xing, Mengwen; Kong, Jiao; Dong, Jie; Jiao, Haili; Li, Fan

    2013-01-01

    Abstract Thiophenic sulfur compounds are released during coal gasification, carbonization, and combustion. Previous studies indicate that thiophenic sulfur compounds degrade very slowly in the environment, and are more carcinogenic than polycyclic aromatic hydrocarbons and nitrogenous compounds. Therefore, it is very important to study the principle of thiophenic sulfur compounds during coal conversion, in order to control their emission and promote clean coal utilization. To realize this goal and understand the formation mechanism of thiophenic sulfur compounds, this study focused on the release behavior of thiophenic sulfur compounds during coal pyrolysis, which is an important phase for all coal thermal conversion processes. The pyrolyzer (CDS-5250) and gas chromatography–mass spectrometry (Focus GC-DSQII) were used to analyze thiophenic sulfur compounds in situ. Several coals with different coal ranks and sulfur contents were chosen as experimental samples, and thiophenic sulfur compounds of the gas produced during pyrolysis under different temperatures and heating rates were investigated. Levels of benzothiophene and dibenzothiophene were obtained during pyrolysis at temperatures ranging from 200°C to 1300°C, and heating rates ranging from 6°C/ms to 14°C/ms and 6°C/s to 14°C/s. Moreover, the relationship between the total amount of benzothiophene and dibenzothiophene released during coal pyrolysis and the organic sulfur content in coal was also discussed. This study is beneficial for understanding the formation and control of thiophenic sulfur compounds, since it provides a series of significant results that show the impact that operation conditions and organic sulfur content in coal have on the amount and species of thiophenic sulfur compounds produced during coal pyrolysis. PMID:23781126

  20. Thiophenic Sulfur Compounds Released During Coal Pyrolysis.

    PubMed

    Xing, Mengwen; Kong, Jiao; Dong, Jie; Jiao, Haili; Li, Fan

    2013-06-01

    Thiophenic sulfur compounds are released during coal gasification, carbonization, and combustion. Previous studies indicate that thiophenic sulfur compounds degrade very slowly in the environment, and are more carcinogenic than polycyclic aromatic hydrocarbons and nitrogenous compounds. Therefore, it is very important to study the principle of thiophenic sulfur compounds during coal conversion, in order to control their emission and promote clean coal utilization. To realize this goal and understand the formation mechanism of thiophenic sulfur compounds, this study focused on the release behavior of thiophenic sulfur compounds during coal pyrolysis, which is an important phase for all coal thermal conversion processes. The pyrolyzer (CDS-5250) and gas chromatography-mass spectrometry (Focus GC-DSQII) were used to analyze thiophenic sulfur compounds in situ. Several coals with different coal ranks and sulfur contents were chosen as experimental samples, and thiophenic sulfur compounds of the gas produced during pyrolysis under different temperatures and heating rates were investigated. Levels of benzothiophene and dibenzothiophene were obtained during pyrolysis at temperatures ranging from 200°C to 1300°C, and heating rates ranging from 6°C/ms to 14°C/ms and 6°C/s to 14°C/s. Moreover, the relationship between the total amount of benzothiophene and dibenzothiophene released during coal pyrolysis and the organic sulfur content in coal was also discussed. This study is beneficial for understanding the formation and control of thiophenic sulfur compounds, since it provides a series of significant results that show the impact that operation conditions and organic sulfur content in coal have on the amount and species of thiophenic sulfur compounds produced during coal pyrolysis.

  1. Biochemical and medical importance of vanadium compounds.

    PubMed

    Korbecki, Jan; Baranowska-Bosiacka, Irena; Gutowska, Izabela; Chlubek, Dariusz

    2012-01-01

    Vanadium belongs to the group of transition metals and is present in the air and soil contaminants in large urban agglomerations due to combustion of fossil fuels. It forms numerous inorganic compounds (vanadyl sulfate, sodium metavanadate, sodium orthovanadate, vanadium pentoxide) as well as complexes with organic compounds (BMOV, BEOV, METVAN). Depending on the research model, vanadium compounds exhibit antitumor or carcinogenic properties. Vanadium compounds generate ROS as a result of Fenton's reaction or of the reaction with atmospheric oxygen. They inactivate the Cdc25B(2) phosphatase and lead to degradation of Cdc25C, which induces G(2)/M phase arrest. In cells, vanadium compounds activate numerous signaling pathways and transcription factors, including PI3K-PKB/Akt-mTOR, NF-κB, MEK1/2-ERK, that cause cell survival or increased expression and release of VEGF. Vanadium compounds inhibit p53-dependent apoptosis and promote entry into the S phase of cells containing functional p53 protein. In addition, vanadium compounds, in particular organic derivatives, have insulin-mimetic and antidiabetic properties. Vanadium compounds lower blood glucose levels in animals and in clinical trials. They also inhibit the activity of protein tyrosine phosphatase 1B. By activating the PI3K-PKB/Akt pathway, vanadium compaunds increase the cellular uptake of glucose by the GLUT4 transporter. The PKB/Akt pathway is also used to inactivate glycogen synthase kinase-3. The impact of vanadium compounds on inflammatory reactions has not been fully studied. Vanadium pentoxide causes expression of COX-2 and the release of proinflammatory cytokines in a human lung fibroblast model. Other vanadium compounds activate NF-κB in macrophages by activating IKKβ.

  2. Water-soluble constituents of caraway: aromatic compound, aromatic compound glucoside and glucides.

    PubMed

    Matsumura, Tetsuko; Ishikawa, Toru; Kitajima, Junichi

    2002-10-01

    From the water-soluble portion of the methanolic extract of caraway (fruit of Carum carvi L.), an aromatic compound, an aromatic compound glucoside and a glucide were isolated together with 16 known compounds. Their structures were clarified as 2-methoxy-2-(4'-hydroxyphenyl)ethanol, junipediol A 2-O-beta-D-glucopyranoside and L-fucitol, respectively.

  3. IRIS Toxicological Review of Thallium and Compounds ...

    EPA Pesticide Factsheets

    Thallium compounds are used in the semiconductor industry, the manufacture of optic lenses and low-melting glass, low-temperature thermometers, alloys, electronic devices, mercury lamps, fireworks, and imitation germs, and clinically as an imaging agent in the diagnosis of certain tumors. EPA's assessment of noncancer health effects and carcinogenic potential of thallium compounds was last prepared and added to the IRIS database between 1988 and 1990. The IRIS program is preparing an assessment that will incorporate current health effects information available for thallium and compounds, and current risk assessment methods. The IRIS assessment for thallium compounds will consist of a Toxicological Review and IRIS Summary. The Toxicological Review is a critical review of the physiochemical and toxicokinetic properties of a chemical, and its toxicity in humans and experimental systems. The assessment will present reference values for the noncancer effects of thallium compounds (RfD and Rfc), and a cancer assessment. The Toxicological Review and IRIS Summary have been subject to Agency review, Interagency review, and external scientific peer review. The final product will reflect the Agency opinion on the overall toxicity of thallium and compounds. EPA is undertaking an Integrated Risk Information System (IRIS) health assessment for thallium and compounds. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effec

  4. Thermodynamic properties of organic iodine compounds

    NASA Astrophysics Data System (ADS)

    Richard, Laurent; Gaona, Xavier

    2011-11-01

    A critical evaluation has been made of the thermodynamic properties reported in the literature for 43 organic iodine compounds in the solid, liquid, or ideal gas state. These compounds include aliphatic, cyclic and aromatic iodides, iodophenols, iodocarboxylic acids, and acetyl and benzoyl iodides. The evaluation has been made on the basis of carbon number systematics and group additivity relations, which also allowed to provide estimates of the thermodynamic properties of those compounds for which no experimental data were available. Standard molal thermodynamic properties at 25 °C and 1 bar and heat capacity coefficients are reported for 13 crystalline, 29 liquid, and 39 ideal gas organic iodine compounds, which can be used to calculate the corresponding properties as a function of temperature and pressure. Values derived for the standard molal Gibbs energy of formation at 25 °C and 1 bar of these crystalline, liquid, and ideal gas organic iodine compounds have subsequently been combined with either solubility measurements or gas/water partition coefficients to obtain values for the standard partial molal Gibbs energies of formation at 25 °C and 1 bar of 32 aqueous organic iodine compounds. The thermodynamic properties of organic iodine compounds calculated in the present study can be used together with those for aqueous inorganic iodine species to predict the organic/inorganic speciation of iodine in marine sediments and petroleum systems, or in the near- and far-field of nuclear waste repositories.

  5. Marine anticorrosion paints based on thiouracil compounds

    SciTech Connect

    Tadros, A.B.; Nabey, A.E.

    1996-10-01

    The inhibition of marine corrosion of steel by 6-amino-2-thiouracil (1) and its derivatives 6-benzylideneamino-2-thiouracil (2) and 6-p-chlorobenzylideneamino-2-thiouracil (3) has been tested on laboratory scale using electrochemical technique which was performed on mild steel in sea water medium and on field scale through the incorporation of the compounds individually in marine paints compositions. The paint containing the compounds were applied on unprimed steel and the coated panels were tested in Alexandria Eastern Harbour water (Egypt). The electrochemical measurements indicate that both compounds (1) & (3) act as cathodic-type inhibitors, but the data of compound (2) showed neither cathodic nor anodic inhibition. The paint composition based on the soluble resin material as a sole binder and containing compound (1) showed the best corrosion protection of its steel surface tell more than 2 months followed by the paint composition containing compound (3). On the other hand, oil is not recommended with paint composition containing these compounds.

  6. Phenolic compounds in Ross Sea water

    NASA Astrophysics Data System (ADS)

    Zangrando, Roberta; Barbaro, Elena; Gambaro, Andrea; Barbante, Carlo; Corami, Fabiana; Kehrwald, Natalie; Capodaglio, Gabriele

    2016-04-01

    Phenolic compounds are semi-volatile organic compounds produced during biomass burning and lignin degradation in water. In atmospheric and paleoclimatic ice cores studies, these compounds are used as biomarkers of wood combustion and supply information on the type of combusted biomass. Phenolic compounds are therefore indicators of paleoclimatic interest. Recent studies of Antarctic aerosols highlighted that phenolic compounds in Antarctica are not exclusively attributable to biomass burning but also derive from marine sources. In order to study the marine contribution to aerosols we developed an analytical method to determine the concentration of vanillic acid, vanillin, p-coumaric acid, syringic acid, isovanillic acid, homovanillic acid, syringaldehyde, acetosyringone and acetovanillone present in dissolved and particle phases in Sea Ross waters using HPLC-MS/MS. The analytical method was validated and used to quantify phenolic compounds in 28 sea water samples collected during a 2012 Ross Sea R/V cruise. The observed compounds were vanillic acid, vanillin, acetovanillone and p-coumaric acid with concentrations in the ng/L range. Higher concentrations of analytes were present in the dissolved phase than in the particle phase. Sample concentrations were greatest in the coastal, surficial and less saline Ross Sea waters near Victoria Land.

  7. Environmental exposure to preformed nitroso compounds.

    PubMed

    Tricker, A R; Spiegelhalder, B; Preussmann, R

    1989-01-01

    In the human environment, nitrosatable amine precursors to N-nitroso compounds and nitrosating species such as nitrite and oxides of nitrogen are abundant. As a result, the formation of N-nitroso compounds and human exposure to these compounds show a rather complex pattern. The largest known human exposures to exogenous N-nitrosamines occur in the work place. This is particularly evident in the rubber and tyre manufacturing industry and in metal cutting and grinding shops. Nearly all industries which are concerned with the production and/or use of amines have a related nitrosamine problem. Outside the industrial environment, commodities such as cosmetics, pharmaceuticals, rubber and household products, which are either prepared from amines or contain high concentrations of amino compounds, may be subject to contamination by low concentrations of N-nitroso compounds. This contamination may result from the use of contaminated starting materials, in particular amines, or from the formation of N-nitroso compounds during manufacturing processes. A similar problem exists with agricultural chemicals. As our knowledge of the occurrence and formation of N-nitroso compounds in the environment increases, preventive measures can be introduced, particularly in manufacturing industries, to reduce the levels of human exposure to nitrosamines in the work place and to protect the consumer from nitrosamine exposure from household commodities.

  8. Biodegradable compounds: Rheological, mechanical and thermal properties

    NASA Astrophysics Data System (ADS)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  9. Risk and liabilities of prescribing compounded medications.

    PubMed

    Randell, Michael D; Duffy, Phillip J

    2014-07-01

    Complications resulting from the use of compounded medications have become a troubling trend nationwide. There is a significant potential for patients to suffer serious harm from the use of substandard medications prepared by compounding pharmacies, and the reality of this problem has been demonstrated in several well-publicized incidences of serious medical complications, including patient deaths, that directly resulted from the use of medications prepared at compounding pharmacies. Unlike US Food and Drug Administration (FDA)-approved drugs, compounded products are not required to meet evidentiary standards for establishing safety and efficacy. Moreover, these products are not held to Good Manufacturing Practices, which require regular inspections, quality control testing, and rejection of material not meeting specifications. Physicians, as well as other prescribers, need to be aware that when a patient suffers harm from using a compounded medication, those injured patients may bring negligence and malpractice claims, not only against the pharmacy and the pharmacist responsible for preparing the medication, but also against the prescribing physician and the physician’s practice. Consequently, the best way for physicians to manage professional risk and avoid both litigation and potential negative patient outcomes related to compounded pharmaceuticals is to not use these products if there is an FDA-approved product available. However, if the use of a compounded medication is medically necessary, then physicians should adhere to the FDA guidance concerning traditional compounding. Moreover, it would be prudent for any physician who intends to either resell or participate in the distribution of compounded products beyond the direct treatment of their patients to consider obtaining the appropriate insurance coverage for this activity.

  10. [Functional analysis of bioactive natural compounds using monoclonal antibodies against natural compounds].

    PubMed

    Uto, Takuhiro

    2014-01-01

    Herbal medicines have recently attracted much importance owing to the rising interest in their health benefits. Hence, further elucidation of the functions and mechanisms of these natural compounds is necessary. Our laboratory has established more than 30 kinds of monoclonal antibodies (MAbs) against bioactive natural compounds. Moreover, we have developed highly sensitive measurement systems for natural compounds, such as enzyme-linked immunosorbent assay (ELISA) and eastern blotting using MAbs. To expand the application of these MAbs to the functional analysis of natural compounds, we established a new approach for the isolation of the target compound from plant extracts using an immunoaffinity column conjugated with an anti-natural compound MAb. Through one-step purification using a MAb-conjugated immunoaffinity column, we have succeeded in preparing a knockout (KO) extract containing all components except the target compound, used as a hapten. Furthermore, we examined the pharmacological effects of the KO extract to identify the precise roles of the bioactive compound in the plant extract. To confirm another beneficial use of MAbs, we investigated the cellular localization and target molecules of natural compounds by immunocytochemistry (ICC) and Western blotting using MAbs. Our results demonstrated that MAbs clearly determined the cellular localization and target molecules of the natural compounds. These approaches may make it possible to determine the potential functions and target molecules of bioactive natural compounds in herbal medicines.

  11. Biodegradation of central intermediate compounds produced from biodegradation of aromatic compounds.

    PubMed

    Cinar, Ozer

    2004-10-01

    In this study I consider the incomplete biodegradation of aromatic compounds during the waste- water cycle between aerobic or anaerobic zones in biological nutrient removal processes, including aerobic biodegradation of compounds (such as cyclohex-l-ene-1-carboxyl-CoA) produced during the incomplete anaerobic biodegradation of aromatic compounds, and anaerobic biodegradation of compounds (such as catechol, protocatechuate, and gentisic acid) produced during the incomplete aerobic biodegradation of aromatic compounds. Anaerobic degradation of the aerobic central intermediates that result from the incomplete aero-bic degradation of aromatic compounds usually leads to benzoyl-CoA. On the other hand, aerobic degradation of the anaerobic central intermediates that result from the incomplete anaerobic degradation of aromatic compounds usually leads to protocatechuate.

  12. A growing codependency: compounding pharmacy and safety.

    PubMed

    Prince, Bryan; Lundevall, Jeremy

    2013-01-01

    Pharmacists and pharmacy technicians are in constant contact with potent compounds. When compounding with powders, there is a susceptibility to environmental conditions such that proper containment be in place to keep the employees safe, the medicine free from cross contamination or the introduction of outside contaminants, and the workplace free from floating active pharmaceutical ingredient particles. Adapting powder hoods as safety devices that work in direct relation to clearly defined standard operating procedures and good lab practices will facilitate a safer lab environment for employees and ensure good-quality prescriptions. This article discusses the safety concerns of compounding with powders and the safety measures to consider when purchasing powder hoods.

  13. Application of bicyclic and cage compounds

    NASA Technical Reports Server (NTRS)

    Clark, R. D.; Archuleta, B. S.

    1976-01-01

    The results of a literature survey of the field of bicyclic and cage compounds were presented, with the objective of identifying those types of compounds with unusual physical and chemical stability, and determining what practical applications have been found for these compounds. Major applications have been as polymers, polymer additives, medicinals, and pesticides. Lesser applications have included fuels, fuel additives, lubricants, lubricant additives, and perfumes. Several areas where further work might be useful were also outlined; these are primarily in the areas of polymers, polymer additives, medicinals, and synthetic lubricants.

  14. Diving for drugs: tunicate anticancer compounds.

    PubMed

    Cooper, Edwin L; Yao, David

    2012-06-01

    The marine biosphere boasts tremendous biodiversity replete with structurally unique, active and selective secondary metabolites. Bioprospecting for antitumor compounds has been rewarding, and tunicates have been especially successful in yielding prospective cancer therapies. These compounds are now subjected to clinical trials in Europe and the USA. With the ongoing search for potent and specific anticancer drugs, in this article we discuss the unique perspectives, compounds and opportunities afforded by this rich source of potential pharmaceuticals. We discuss marine-derived antitumor drugs, their structures, and their various types and levels of antitumor activities in bench and bedside efforts.

  15. Catalytic properties of lamellar compounds of graphite

    NASA Astrophysics Data System (ADS)

    Novikov, Yu. N.; Vol'pin, M. E.

    1981-05-01

    In heterogenous catalysis, the supports derived from graphite and carbon-graphite materials constitute a unique and exceptionally attractive group. The lamellar compounds of graphite with various kinds of electron acceptors and donors show catalytic activities on the following reactions: the oxidation of organic compounds with molecular oxygen, many sorts of polymerization, alcohol and formic acid dehydrogenation, hydrogenation and isomerization of olefins and acetylenes, ammonia synthesis from nitrogen and hydrogen, and also CO hydrogenation. Furthermore, the transition metal lamellar compounds of graphite are highly active catalysts in the process of the graphite-to-diamond conversion.

  16. Case reports: compounding to relieve arthritis pain.

    PubMed

    Marshall, Robert; Vidaurri, Vincent A; Boomsma, Diane; Buchta, Anthony J; Vail, Jane

    2008-01-01

    Arthritis is an ancient disorder that defies cure. The management of arthritis may require medication, surgery, and/or nonpharmacologic treatment, and patients whose pain responds to drug therapy often achieve substantial benefit from a compounded preparation. Customized to include analgesics in combinations and concentrations not found in commercially manufactured medications, a pain-relieving compound can be prepared in a transdermal form that minimizes the risk of adverse effects associated with some oral medications. In this article, we present case reports of patients whose arthritic pain was relieved by a pharmaceutical compound. Formulations effective in treating inflammatory pain are also provided.

  17. Perfluorinated compounds: occurrence and risk profile.

    PubMed

    Kovarova, Jana; Svobodova, Zdenka

    2008-10-01

    Perfluorinated compounds (PFCs) such as perfluoro-octane sulphonate (PFOS) and perfluorooctanoic acid (PFOA) are emerging environmental pollutants, arising mainly from their use as surface treatment chemicals, polymerization aids and surfactants. They are ubiquitous, persistent and bioaccumulative in the environment. Perfluorinated compounds are being proposed as a new class of POPs. Although tests in rodents have demonstrated numerous negative effects of PFCs, it is unclear if exposure to perfluorinated compounds may affect human health. This review provides an overview of the recent toxicology and toxicokinetics, monitoring data now available for the environment, wildlife, and humans and attempts to explain the mechanisms of action of PFCs.

  18. Periodicity effects on compound guided waves

    NASA Astrophysics Data System (ADS)

    Chiadini, Francesco; Fiumara, Vincenzo; Scaglione, Antonio; Lakhtakia, Akhlesh

    2016-09-01

    Surface waves of different types can be compounded when a homogeneous layer is sandwiched between two half spaces filled with dissimilar periodically non-homogeneous dielectric materials and the intermediate layer is sufficiently thin. We solved the boundary-value problem for compound waves guided by a layer of a homogeneous and isotropic (metal or dielectric) material sandwiched between a structurally chiral material (SCM) and a periodically multi-layered isotropic dielectric material. We found that the periodicity of the SCM is crucial to excite a multiplicity of compound guided waves with strong coupling between the two interfaces.

  19. Two novel compounds from Paeonia suffructicosa.

    PubMed

    Lin, H C; Ding, H Y; Wu, Y C

    1998-03-01

    A new hexacyclic triterpenoid, mudanpinoic acid A (1), and a new gallic acid glycoside, mudanoside B (2), along with nine known compounds--benzoic acid, resacetophenone, paeoniflorigenone, beta-sitosterol, betulinic acid, oleanoic acid, quercetin, beta-sitosterol-beta-D-glucoside, and trans-caffeic acid stearyl ester-were isolated from the dried root cortex of Paeonia suffruticosa. The structures of the novel compounds were elucidated on the basis of spectral methods, and that of compound 1 was confirmed by X-ray crystallographic analysis.

  20. Atmospheric Chemistry of Micrometeoritic Organic Compounds

    NASA Technical Reports Server (NTRS)

    Kress, M. E.; Belle, C. L.; Pevyhouse, A. R.; Iraci, L. T.

    2011-01-01

    Micrometeorites approx.100 m in diameter deliver most of the Earth s annual accumulation of extraterrestrial material. These small particles are so strongly heated upon atmospheric entry that most of their volatile content is vaporized. Here we present preliminary results from two sets of experiments to investigate the fate of the organic fraction of micrometeorites. In the first set of experiments, 300 m particles of a CM carbonaceous chondrite were subject to flash pyrolysis, simulating atmospheric entry. In addition to CO and CO2, many organic compounds were released, including functionalized benzenes, hydrocarbons, and small polycyclic aromatic hydrocarbons. In the second set of experiments, we subjected two of these compounds to conditions that simulate the heterogeneous chemistry of Earth s upper atmosphere. We find evidence that meteor-derived compounds can follow reaction pathways leading to the formation of more complex organic compounds.

  1. Agricultural Compounds in Water and Birth Defects.

    PubMed

    Brender, Jean D; Weyer, Peter J

    2016-06-01

    Agricultural compounds have been detected in drinking water, some of which are teratogens in animal models. The most commonly detected agricultural compounds in drinking water include nitrate, atrazine, and desethylatrazine. Arsenic can also be an agricultural contaminant, although arsenic often originates from geologic sources. Nitrate has been the most studied agricultural compound in relation to prenatal exposure and birth defects. In several case-control studies published since 2000, women giving birth to babies with neural tube defects, oral clefts, and limb deficiencies were more likely than control mothers to be exposed to higher concentrations of drinking water nitrate during pregnancy. Higher concentrations of atrazine in drinking water have been associated with abdominal defects, gastroschisis, and other defects. Elevated arsenic in drinking water has also been associated with birth defects. Since these compounds often occur as mixtures, it is suggested that future research focus on the impact of mixtures, such as nitrate and atrazine, on birth defects.

  2. Production method for making rare earth compounds

    DOEpatents

    McCallum, R.W.; Ellis, T.W.; Dennis, K.W.; Hofer, R.J.; Branagan, D.J.

    1997-11-25

    A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g., a transition metal and optional boron), and a carbide-forming element (e.g., a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g., Nd{sub 2}Fe{sub 14}B or LaNi{sub 5}) and a carbide of the carbide-forming element are formed.

  3. Microwave spectra of some volatile organic compounds

    NASA Technical Reports Server (NTRS)

    White, W. F.

    1975-01-01

    A computer-controlled microwave (MRR) spectrometer was used to catalog reference spectra for chemical analysis. Tables of absorption frequency, peak absorption intensity, and integrated intensity are included for 26 volatile organic compounds, all but one of which contain oxygen.

  4. ANALYSIS OF FISH HOMOGENATES FOR PERFLUORINATED COMPOUNDS

    EPA Science Inventory

    Perfluorinated compounds (PFCs) which include PFOS and PFOA are widely distributed in wildlife. Whole fish homogenates were analyzed for PFCs from the upper Mississippi, the Missouri and the Ohio rivers. Methods development, validation data, and preliminary study results will b...

  5. Production method for making rare earth compounds

    DOEpatents

    McCallum, R. William; Ellis, Timothy W.; Dennis, Kevin W.; Hofer, Robert J.; Branagan, Daniel J.

    1997-11-25

    A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g. a transition metal and optional boron), and a carbide-forming element (e.g. a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g. Nd.sub.2 Fe.sub.14 B or LaNi.sub.5) and a carbide of the carbide-forming element are formed.

  6. New pyrazolic compounds as cytotoxic agents.

    PubMed

    Bouabdallah, Ibrahim; M'Barek, Lahcen Ait; Zyad, Abdelmajid; Ramdani, Abdelkrim; Zidane, Ismail; Melhaoui, Ahmed

    2007-04-01

    The evaluation of the in vitro cytotoxic properties of two pyrazole compounds: 1-(4-nitrophényl)-3,5-diméthylpyrazole (1) and 1,1'-di(4-nitrophényl)-5,5'-diisopropyl-3,3'-bipyrazole (2) was investigated against Hep cell line (Human laryngeal carcinoma). These two compounds showed an important cytotoxic activity on the Hep cell line, with IC(50): 8.25 microg mL(-1) for the compound 1; IC(50): 10.20 microg mL(-1) for the compound 2 while the IC(50) for adriamycine used as positive control was 3.62 microg mL(-1).

  7. Methylene Diphenyl Diisocyanate (MDI) And Related Compounds

    EPA Pesticide Factsheets

    This document addresses the use of methylene diphenyl diisocyanate (MDI) and related compounds (See Appendix 1) in products that may result in consumer and general population exposures, particularly in or around buildings, including homes and schools.

  8. Methylene Diphenyl Diisocyanate (MDI) And Related Compounds

    EPA Pesticide Factsheets

    This document addresses the use of methylene diphenyl diisocyanate (MDI) and related compounds (See Appendix 1) in products that may result in consumer and general population exposures, particularly in or around buildings, including homes and schools.

  9. VOLATILE ORGANIC COMPOUNDS AS EXPOSURE BIOMARKERS

    EPA Science Inventory

    Alveolar breath sampling and analysis can be extremely useful in exposure assessment studies involving volatile organic compounds (VOCs). Over recent years scientists from the US Environmental Protection Agency's National Exposure Research Laboratory have developed and refined...

  10. Thermodynamic Analysis of Ionic Compounds: Synthetic Applications.

    ERIC Educational Resources Information Center

    Yoder, Claude H.

    1986-01-01

    Shows how thermodynamic cycles can be used to understand trends in heats of formation and aqueous solubilities and, most importantly, how they may be used to choose synthetic routes to new ionic compounds. (JN)

  11. Melanogenesis inhibitory compounds from Saussureae Radix.

    PubMed

    Choi, Ji Young; Choi, Eun Hyang; Jung, Hee Wook; Oh, Joon Seok; Lee, Won-Hee; Lee, Jong Gu; Son, Jong-Keun; Kim, Youngsoo; Lee, Seung Ho

    2008-03-01

    Ten compounds were isolated from the EtOAc soluble part of the MeOH extract of Saussureae Radix, with their effects on melanin production also evaluated in B-16 mouse melanoma cell lines stimulated with 3-isobutyl-1-methylxanthine (IBMX), an elevator of cellular cAMP. The compounds were identified as aplotaxene (1), 1 beta-hydroxy arbusculin A (2), costunolide (3), dehydrocostuslactone (4), 11 beta,13-dihydrocostunolide (5), reynosin (6), heptadec-(9Z)-enoic acid (7), beta-sitosterol (8), linoleic acid methyl ester (9) and betulinic acid methyl ester (10). Compounds 2, 9 and 10 were identified from Saussureae Radix for the first time. Furthermore, compounds 2, 3 and 6 showed potent inhibitory effects on the IBMX-induced melanogenesis, in dose-dependent manners, with IC50 values of 11, 3 and 2.5 microg/mL, respectively. As a positive control, arbutin exhibited an IC50 value of 29 microg/mL.

  12. Methoxylated 2'-hydroxychalcones as antiparasitic hit compounds.

    PubMed

    Borsari, Chiara; Santarem, Nuno; Torrado, Juan; Olías, Ana Isabel; Corral, María Jesús; Baptista, Catarina; Gul, Sheraz; Wolf, Markus; Kuzikov, Maria; Ellinger, Bernhard; Witt, Gesa; Gribbon, Philip; Reinshagen, Jeanette; Linciano, Pasquale; Tait, Annalisa; Costantino, Luca; Freitas-Junior, Lucio H; Moraes, Carolina B; Bruno Dos Santos, Pascoalino; Alcântara, Laura Maria; Franco, Caio Haddad; Bertolacini, Claudia Danielli; Fontana, Vanessa; Tejera Nevado, Paloma; Clos, Joachim; Alunda, José María; Cordeiro-da-Silva, Anabela; Ferrari, Stefania; Costi, Maria Paola

    2017-01-27

    Chalcones display a broad spectrum of pharmacological activities. Herein, a series of 2'-hydroxy methoxylated chalcones was synthesized and evaluated towards Trypanosoma brucei, Trypanosoma cruzi and Leishmania infantum. Among the synthesized library, compounds 1, 3, 4, 7 and 8 were the most potent and selective anti-T. brucei compounds (EC50 = 1.3-4.2 μM, selectivity index >10-fold). Compound 4 showed the best early-tox and antiparasitic profile. The pharmacokinetic studies of compound 4 in BALB/c mice using hydroxypropil-β-cyclodextrins formulation showed a 7.5 times increase in oral bioavailability. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  13. Extraction and isolation of phenolic compounds.

    PubMed

    Santos-Buelga, Celestino; Gonzalez-Manzano, Susana; Dueñas, Montserrat; Gonzalez-Paramas, Ana M

    2012-01-01

    Phenolic compounds constitute a major class of plant secondary metabolites that are widely distributed in the plant kingdom and show a large structural diversity. These compounds occur as aglycones or glycosides, as monomers or constituting highly polymerized structures, or as free or matrix-bound compounds. Furthermore, they are not uniformly distributed in the plant and their stability varies significantly. This greatly complicates their extraction and isolation processes, which means that a single standardized procedure cannot be recommended for all phenolics and/or plant materials; procedures have to be optimized depending on the nature of the sample and the target analytes, and also on the object of the study. In this chapter, the main techniques for sample preparation, and extraction and isolation of phenolic compounds have been reviewed-from classical solvent extraction procedures to more modern approaches, such as the use of molecularly imprinted polymers or counter-current chromatography.

  14. Refractory-metal compound impregnation of polytetrafluoroethylene

    NASA Technical Reports Server (NTRS)

    Leibecki, H. F.

    1969-01-01

    Process impregnates polytetrafluoroethylene /PTFE/ with rhenium or molybdenum compounds. The refractory metals impregnated PTFE combines chemical inertness with electrical conductivity. They are useful for electro-chemical cells, chemical processing equipment, catalysts, electrostatic charge removal, RF gasketing, and cable shielding.

  15. Application of Fiber Optics and Compound Collectors

    NASA Technical Reports Server (NTRS)

    Fantone, S. D.

    1984-01-01

    The utilization of fiber optics and compound flux collectors as optical components in stellar photometers is discussed. Basic principles are outlined for such components and systems issues are addressed.

  16. Food applications of natural antimicrobial compounds

    PubMed Central

    Lucera, Annalisa; Costa, Cristina; Conte, Amalia; Del Nobile, Matteo A.

    2012-01-01

    In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying, and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables, and cereal-based products where these compounds found application. PMID:23060862

  17. Stabilized lanthanum sulphur compounds. [thermoelectric materials

    NASA Technical Reports Server (NTRS)

    Reynolds, G. H.; Elsner, N. B.; Shearer, C. H. (Inventor)

    1983-01-01

    Lanthanum sulfide is maintained in the stable cubic phase form over a temperature range of from 500 C to 1500 C by adding to it small amounts of calcium, barium, or strontium. This compound is an excellent thermoelectric material.

  18. Botanical Compounds: Effects on Major Eye Diseases

    PubMed Central

    Huynh, Tuan-Phat; Mann, Shivani N.; Mandal, Nawajes A.

    2013-01-01

    Botanical compounds have been widely used throughout history as cures for various diseases and ailments. Many of these compounds exhibit strong antioxidative, anti-inflammatory, and antiapoptotic properties. These are also common damaging mechanisms apparent in several ocular diseases, including age-related macular degeneration (AMD), glaucoma, diabetic retinopathy, cataract, and retinitis pigmentosa. In recent years, there have been many epidemiological and clinical studies that have demonstrated the beneficial effects of plant-derived compounds, such as curcumin, lutein and zeaxanthin, danshen, ginseng, and many more, on these ocular pathologies. Studies in cell cultures and animal models showed promising results for their uses in eye diseases. While there are many apparent significant correlations, further investigation is needed to uncover the mechanistic pathways of these botanical compounds in order to reach widespread pharmaceutical use and provide noninvasive alternatives for prevention and treatments of the major eye diseases. PMID:23843879

  19. Thermodynamic Analysis of Ionic Compounds: Synthetic Applications.

    ERIC Educational Resources Information Center

    Yoder, Claude H.

    1986-01-01

    Shows how thermodynamic cycles can be used to understand trends in heats of formation and aqueous solubilities and, most importantly, how they may be used to choose synthetic routes to new ionic compounds. (JN)

  20. New twisted intermetallic compound superconductor: A concept

    NASA Technical Reports Server (NTRS)

    Coles, W. D.; Brown, G. V.; Laurence, J. C.

    1972-01-01

    Method for processing Nb3Sn and other intermetallic compound superconductors produces a twisted, stabilized wire or tube which can be used to wind electromagnetics, armatures, rotors, and field windings for motors and generators as well as other magnetic devices.

  1. Energies of organic compounds. Final report

    SciTech Connect

    1995-07-01

    The objective of this research was to gain information on the energies of organic compounds and on the factors that control energies. The work involved calorimetric measurements of energy changes and theoretical studies of intramolecular interactions and molecular energies.

  2. Synthesis of natural product inspired compound collections.

    PubMed

    Kumar, Kamal; Waldmann, Herbert

    2009-01-01

    Natural products, their derivatives, and their analogues are among the most important sources for new drug candidates and tools for chemical biology and medicinal chemistry research. Therefore, there is a need for the development of efficient synthesis methods which give access to natural product derived and inspired compound collections. To meet this challenge, the requirements of multistep stereoselective syntheses, and the logic and methodology of natural product total synthesis need to be translated and adapted to the methods and formats for the synthesis of compound collections. Recent developments in the synthesis of natural product inspired compound collections having carbocyclic and heterocyclic scaffolds highlight the fact that this goal can be successfully attained. The progress made has paved the way for the integration of natural product inspired compound collections into medicinal chemistry and chemical biology research.

  3. VOLATILE ORGANIC COMPOUNDS AS EXPOSURE BIOMARKERS

    EPA Science Inventory

    Alveolar breath sampling and analysis can be extremely useful in exposure assessment studies involving volatile organic compounds (VOCs). Over recent years scientists from the US Environmental Protection Agency's National Exposure Research Laboratory have developed and refined...

  4. Compound treatments and transportability of causal inference.

    PubMed

    Hernán, Miguel A; VanderWeele, Tyler J

    2011-05-01

    Ill-defined causal questions present serious problems for observational studies-problems that are largely unappreciated. This paper extends the usual counterfactual framework to consider causal questions about compound treatments for which there are many possible implementations (for example, "prevention of obesity"). We describe the causal effect of compound treatments and their identifiability conditions, with a special emphasis on the consistency condition. We then discuss the challenges of using the estimated effect of a compound treatment in one study population to inform decisions in the same population and in other populations. These challenges arise because the causal effect of compound treatments depends on the distribution of the versions of treatment in the population. Such causal effects can be unpredictable when the versions of treatment are unknown. We discuss how such issues of "transportability" are related to the consistency condition in causal inference. With more carefully framed questions, the results of epidemiologic studies can be of greater value to decision-makers.

  5. Signs of Perchlorates and Sulfur Containing Compounds

    NASA Image and Video Library

    2012-12-03

    NASA Mars rover Curiosity has detected sulfur, chlorine, and oxygen compounds in fine grains scooped by the rover at a wind drift site called Rocknest. The grains were heated and analyzed using the rover Sample Analysis at Mars instrument suite.

  6. Polyfluorinated compounds: past, present, and future.

    PubMed

    Lindstrom, Andrew B; Strynar, Mark J; Libelo, E Laurence

    2011-10-01

    Interest and concern about polyfluorinated compounds (PFCs), such as perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and an increasing number of other related compounds is growing as more is learned about these ubiquitous anthropogenic substances. Many of these compounds can be toxic, and they are regularly found in the blood of animals and humans worldwide. A great deal of research has been conducted in this area, but a surprising amount remains unknown about their distribution in the environment and how people ultimately become exposed. The utility of these compounds seems to ensure their continued use in one form or another for the foreseeable future, presenting a long-term challenge to scientists, industry leaders, and public health officials worldwide.

  7. The characteristics of compound diffractive telescope.

    PubMed

    Liu, Hua; Lu, Zhenwu; Yue, Jinying; Zhang, Honxin

    2008-09-29

    Compound diffractive telescope is a new type of space optical system. It applies the structure of compound eyes into diffractive telescopes. With the help of diffractive optical element, the optical system could become lighter in weight, lower in cost, and looser in sensitivity to manufacturing tolerance. And with the help of compound eyes structure, the field of view is expanded. A demonstrated system of compound diffractive telescope is given. It is composed of one 50mm aperture primary diffractive lens and twenty-one eyepieces. The characteristics of the system are analysed by testing its star image and resolution. It is shown that the whole system can provide about diffraction limit imaging within 4.2 degree field of view.

  8. MOLECULAR BASIS OF BIODEGRADATION OF CHLOROAROMATIC COMPOUNDS

    EPA Science Inventory

    Chlorinated aromatic hydrocarbons are widely used in industry and agriculture, and comprise the bulk of environmental pollutants. Although simple aromatic compounds are biodegradable by a variety of degradative pathways, their halogenated counterparts are more resistant to bacter...

  9. Perfluorinated Compounds In The Ohio River Basin

    EPA Science Inventory

    Contaminants of emerging concern (CECs) in waterways include pharmaceuticals and personal care products (PPCPs), alkylphenols, endocrine disrupting chemicals (EDCs) and perfluorinated alkyl compounds (PFCs). Their distributions and persistence in the aquatic environment remain p...

  10. Perfluorinated Compounds In The Ohio River Basin

    EPA Science Inventory

    Contaminants of emerging concern (CECs) in waterways include pharmaceuticals and personal care products (PPCPs), alkylphenols, endocrine disrupting chemicals (EDCs) and perfluorinated alkyl compounds (PFCs). Their distributions and persistence in the aquatic environment remain p...

  11. SEPARATION PROCESS FOR PROTACTINIUM AND COMPOUNDS THEREOF

    DOEpatents

    Van Winkle, A.

    1959-07-21

    The separation of protactinium from aqueous solutions from its mixtures with thorium, uranium and fission products is described. The process for the separation comprises preparing an ion nitric acid solution containing protactinium in the pentavalent state and contacting the solution with a fluorinated beta diketone, such as trifluoroacetylacetone, either alone or as an organic solvent solution to form a pentavalent protactinium chelate compound. When the organic solvent is present the chelate compound is extracted; otherwise it is separated by filtration.

  12. Graphite intercalation compound with arsenic pentafluoride

    SciTech Connect

    Kozlov, S.P.; Nikonorov, Yu.I.

    1987-04-01

    A decrease in the electrical resistance of the graphite compound with arsenic pentafluoride of the composition C/sub 10.2/AsF/sub 5/ is observed in the 293-510/sup 0/K range. It was hypothesized that this is due to elimination of the weakly conducting fluorides in the compound. When C/sub 10.2/AsF/sub 5/ is treated with water and hydrogen fluoride, it decomposes.

  13. Model Compound Interactions Characterizing Aquatic Humic Substances

    DTIC Science & Technology

    1990-01-01

    Isolation...............48 3.3.2 Titration Apparatus..............49 3.3.3 Potentiometric Titrations ..........52 3.3.4 Complexometric Titrations ...Potentiometric Titrations ..........57 4.2.2 Complexometric Titrations ..........61 4.3 Natural Sources and Model Compound Mixtures . .. 69 4.3.1...groundwater ........ .................... 50 3.4 Milli-Q complexometric titrations ... ......... .54 4.1a Potentiometric titration of model compounds

  14. Medical Applications and Toxicities of Gallium Compounds

    PubMed Central

    Chitambar, Christopher R.

    2010-01-01

    Over the past two to three decades, gallium compounds have gained importance in the fields of medicine and electronics. In clinical medicine, radioactive gallium and stable gallium nitrate are used as diagnostic and therapeutic agents in cancer and disorders of calcium and bone metabolism. In addition, gallium compounds have displayed anti-inflammatory and immunosuppressive activity in animal models of human disease while more recent studies have shown that gallium compounds may function as antimicrobial agents against certain pathogens. In a totally different realm, the chemical properties of gallium arsenide have led to its use in the semiconductor industry. Gallium compounds, whether used medically or in the electronics field, have toxicities. Patients receiving gallium nitrate for the treatment of various diseases may benefit from such therapy, but knowledge of the therapeutic index of this drug is necessary to avoid clinical toxicities. Animals exposed to gallium arsenide display toxicities in certain organ systems suggesting that environmental risks may exist for individuals exposed to this compound in the workplace. Although the arsenic moiety of gallium arsenide appears to be mainly responsible for its pulmonary toxicity, gallium may contribute to some of the detrimental effects in other organs. The use of older and newer gallium compounds in clinical medicine may be advanced by a better understanding of their mechanisms of action, drug resistance, pharmacology, and side-effects. This review will discuss the medical applications of gallium and its mechanisms of action, the newer gallium compounds and future directions for development, and the toxicities of gallium compounds in current use. PMID:20623028

  15. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, H.S.; Yang, X.O.; McBreen, J.

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI{sup +} ion in alkali metal batteries. 3 figs.

  16. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, Hung Sui; Yang, Xiao-Oing; McBreen, James

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI.sup.+ ion in alkali metal batteries.

  17. Metal Compounds in Therapy and Diagnosis

    NASA Astrophysics Data System (ADS)

    Abrams, Michael J.; Murrer, Barry A.

    1993-08-01

    There is increasing interest in the use of metal-containing compounds in medicine. This review describes several therapeutic applications, such as the use of platinum complexes in cancer chemotherapy, gold compounds in the treatment of arthritis, gallium in hypercalcemia, bismuth in anti-ulcer medication, and sodium nitroprusside in hypertension. The use of metal radionuclides in diagnosis and radiotherapy and the role of paramagnetic metal complexes as contrast agents in magnetic resonance imaging are also discussed.

  18. Study of Compounds for Activity against Leishmania

    DTIC Science & Technology

    1992-10-27

    Mrs. Barbara Harris, Miss Laura A. Lamb, and Miss Shannon Waits. tORZWORD Opinions, interpretations, conclusions and recommendations are those of the...antileishmanial activity against both visceral (Leishmania donovani) and cutaneous (Lebs-Qnia, braziliensis panamensis) leishmaniasis . Among the most promising...active compounds found against visceral leishmaniasis durinq these studies is the 8-aminoquinoline, WR06026. This compound is now undergoing clinical

  19. Bioremediation and phytoremediation: Chlorinated and recalcitrant compounds

    SciTech Connect

    1998-12-31

    Bioremediation and phytoremediation have progressed, especially with regard to the treatment of hydrocarbon-contaminated sites. Sites contaminated with chlorinated and recalcitrant compounds have proven more resistant to these approaches, but exciting progress is being made both in the laboratory and in the field. This book brings together the latest breakthrough thinking and results in bioremediation, with chapters on cometabolic processes, aerobic and anaerobic mechanisms, biological reductive dechlorination processes, bioaugmentation, biomonitoring, and phytoremediation of recalcitrant organic compounds.

  20. High-Molecular Compounds (Selected Articles).

    DTIC Science & Technology

    1987-06-22

    the semiquinone MB, which is formed at the intermediate stage of the transformation of the dye into a leuco - compound during light absorption. With this...mechanism the initiation of the dye molecules in the form of a leuco -compound will enter the polymer chain as end groups: 8 (¢1NGN Nl,), i (2 )Gi ) A...8217.. . . ... ... e. Migration of Stable Radicals in Polymers .............. 5 Dye Entrance into the PolymerChain During Sensitized Photopolymerization of

  1. Formose reaction controlled by boronic acid compounds

    PubMed Central

    Imai, Toru; Michitaka, Tomohiro

    2016-01-01

    Formose reactions were carried out in the presence of low molecular weight and macromolecular boronic acid compounds, i.e., sodium phenylboronate (SPB) and a copolymer of sodium 4-vinylphenylboronate with sodium 4-styrenesulfonate (pVPB/NaSS), respectively. The boronic acid compounds provided different selectivities; sugars of a small carbon number were formed favorably in the presence of SPB, whereas sugar alcohols of a larger carbon number were formed preferably in the presence of pVPB/NaSS. PMID:28144337

  2. Particles and iodine compounds in coastal Antarctica

    NASA Astrophysics Data System (ADS)

    Roscoe, Howard K.; Jones, Anna E.; Brough, Neil; Weller, Rolf; Saiz-Lopez, Alfonso; Mahajan, Anoop S.; Schoenhardt, Anja; Burrows, John P.; Fleming, Zoe L.

    2015-07-01

    Aerosol particle number concentrations have been measured at Halley and Neumayer on the Antarctic coast, since 2004 and 1984, respectively. Sulphur compounds known to be implicated in particle formation and growth were independently measured: sulphate ions and methane sulphonic acid in filtered aerosol samples and gas phase dimethyl sulphide for limited periods. Iodine oxide, IO, was determined by a satellite sensor from 2003 to 2009 and by different ground-based sensors at Halley in 2004 and 2007. Previous model results and midlatitude observations show that iodine compounds consistent with the large values of IO observed may be responsible for an increase in number concentrations of small particles. Coastal Antarctica is useful for investigating correlations between particles, sulphur, and iodine compounds, because of their large annual cycles and the source of iodine compounds in sea ice. After smoothing all the measured data by several days, the shapes of the annual cycles in particle concentration at Halley and Neumayer are approximated by linear combinations of the shapes of sulphur compounds and IO but not by sulphur compounds alone. However, there is no short-term correlation between IO and particle concentration. The apparent correlation by eye after smoothing but not in the short term suggests that iodine compounds and particles are sourced some distance offshore. This suggests that new particles formed from iodine compounds are viable, i.e., they can last long enough to grow to the larger particles that contribute to cloud condensation nuclei, rather than being simply collected by existing particles. If so, there is significant potential for climate feedback near the sea ice zone via the aerosol indirect effect.

  3. Medical applications and toxicities of gallium compounds.

    PubMed

    Chitambar, Christopher R

    2010-05-01

    Over the past two to three decades, gallium compounds have gained importance in the fields of medicine and electronics. In clinical medicine, radioactive gallium and stable gallium nitrate are used as diagnostic and therapeutic agents in cancer and disorders of calcium and bone metabolism. In addition, gallium compounds have displayed anti-inflammatory and immunosuppressive activity in animal models of human disease while more recent studies have shown that gallium compounds may function as antimicrobial agents against certain pathogens. In a totally different realm, the chemical properties of gallium arsenide have led to its use in the semiconductor industry. Gallium compounds, whether used medically or in the electronics field, have toxicities. Patients receiving gallium nitrate for the treatment of various diseases may benefit from such therapy, but knowledge of the therapeutic index of this drug is necessary to avoid clinical toxicities. Animals exposed to gallium arsenide display toxicities in certain organ systems suggesting that environmental risks may exist for individuals exposed to this compound in the workplace. Although the arsenic moiety of gallium arsenide appears to be mainly responsible for its pulmonary toxicity, gallium may contribute to some of the detrimental effects in other organs. The use of older and newer gallium compounds in clinical medicine may be advanced by a better understanding of their mechanisms of action, drug resistance, pharmacology, and side-effects. This review will discuss the medical applications of gallium and its mechanisms of action, the newer gallium compounds and future directions for development, and the toxicities of gallium compounds in current use.

  4. Microwave Resonant Absorption of Potential Exothermic Compounds

    DTIC Science & Technology

    1989-12-22

    exothermic materials: lead azide, lead styphnate , PETN, composition B, black powder, nitrocellulose, boron barium Chromate, and M-30 exhibit sharp...the exothermic materials. Table 1. Compounds Tested Compound Source 1 Lead Azide Broco Inc, Rialto CA 2 Lead Styphnate 3 PETN 4 Comp B 5 Black Powder 6...Nitrocellulose (12.6% Nitration) 7 Boron Barium Chromate ICI America, Valley Forge, PA 8 M30 (Gun Propellent) Radford Army Ammunition Plant, Radford

  5. Alkyllead compounds and their environmental toxicology.

    PubMed

    Abadin, Henry G; Pohl, Hana R

    2010-01-01

    Alkyllead compounds are man-made compounds in which a carbon atom of one or more organic molecules is bound to a lead atom. Tetraethyllead and tetramethyllead are the most common alkyllead compounds that were used primarily as gasoline additives for many years. Consequently, auto emissions have accounted for a major part of lead environmental pollution. Alkyllead compounds can readily enter living organisms as they are well absorbed via all major routes of entry. Because of their lipid solubility, the alkylleads can also readily cross the blood-brain barrier. The toxicokinetic information on organic lead can be used as biomarkers of exposure for monitoring exposed individuals. The organic alkyllead compounds are more toxic than the inorganic forms of lead. Neurotoxicity is the predominant effect of lead (both for organic and inorganic forms), although lead affects almost every organ of the body. The use of alkyllead compounds has declined over the last 20 years, due to the worldwide effort to eliminate the use of leaded gasoline. This achievement can be viewed as a great accomplishment of public health preventive measures.

  6. Genotoxicology of N-nitroso compounds

    SciTech Connect

    Rao, T.K.; Epler, J.L.; Lijinsky, W.

    1984-01-01

    This book attempts to demonstrate the complexity of the mechanisms of biological action of the toxic N-nitroso compounds. The conclusions presented on genetic toxicology are based on comparative studies of biological assays and a firm foundation of chemical structural relations among N-nitroso compounds. Topics considered include the formation of N-nitroso compounds and their significance, N-nitrosamine mutagenicity using the Salmonella/Mammalian-Microsome Mutagenicity Assay, the structural basis for the mutagenic activity of N-nitrosamines in the Salmonella Histidine Reversion Assay, the effect of pH and structure on the mutagenic activity of N-nitroso compounds, the induction of bacteriophage lambda by N-nitroso compounds, the relationship between the carcinogenicity and mutagenicity of nitrosamines in a Hepatocyte-Mediated Mutagenicity Assay, the mutagenic activity of nitrosamines in mammalian cells (study with the CHO/HGPRT and human leukocyte SCE assays), dimethylnitrosamine demethylase and the mutagenicity of dimethylnitrosamine (effects of rodent liver fractions and dimethylsulfoxide), the relationship between metabolism and mutagenicity of two cyclic nitrosamines, structureactivity relations in carcinogenesis by N-nitroso compounds, and a comparison of mutagenic and carcinogenic properties.

  7. Compounding pharmacies: who is in charge?

    PubMed

    Pergolizzi, Joseph V; Labhsetwar, Sumedha; LeQuang, Jo Ann

    2013-03-01

    Compounding pharmacies play an increasing and increasingly important role in our healthcare system, but recent media attention has exposed limited regulatory control over these organizations at the same time their role is expanding. Compounding pharmacies are not regulated in the same manner as pharmaceutical companies and are governed largely by Chapter <797>, a monograph on the pharmaceutical compounding of sterile products, issued but not enforced by the U.S. Pharmacopeial Convention. Not all states require adherence to Chapter <797>, and those that do may choose not to enforce it stringently. Furthermore, Chapter <797> is not a strong standard--for example, it does not require documentation of drug lot numbers or cross-references for patient identification. Thus, there have long been many potential quality issues associated with compounding pharmacies. As these compounding pharmacies provide important products and services, better regulation is urgently needed. Moreover, clinicians should be better aware that some injectable products they use may have been prepared by a compounding pharmacy.

  8. Continuous dielectrophoretic centering of compound droplets

    NASA Astrophysics Data System (ADS)

    Randall, Greg; Blue, Brent

    2012-02-01

    Compound droplets, or droplets-within-droplets, are traditionally key components in applications ranging from drug delivery to the food industry. Presently, millimeter-sized compound droplets are precursors for foam shell targets in inertial fusion energy work. A key constraint is a uniform foam shell thickness, which in turn requires a centered core in the compound droplet precursor. Previously, Bei et al. (2009, 2010) have shown that compound droplets could be centered in a static fluid using an electric field of 0.7 kV/cm at 20 MHz. To apply centering to existing or future applications, it is imperative to develop a continuous droplet centering process by overcoming the additional complications from motion. Here, we present analysis and experimental data of a continuous droplet centering device that uses an electric field to force a core droplet to the center of a moving compound drop. Our analysis focuses on how interfacial rheology and electrohydrodynamic flows affect the centering dynamics and droplet deformation. Proof-of-principle experiments are performed in a vertical channel using buoyancy to drive a solution of compound droplets stabilized with phospholipid and protein emulsifiers through a kV/cm electric field.

  9. Excitonic effects in oxyhalide scintillating host compounds

    SciTech Connect

    Shwetha, G.; Kanchana, V.; Valsakumar, M. C.

    2014-10-07

    Ab-initio calculations based on density functional theory have been performed to study the electronic, optical, mechanical, and vibrational properties of scintillator host compounds YOX (X = F, Cl, Br, and I). Semiempirical dispersion correction schemes are used to find the effect of van der Waals forces on these layered compounds and we found this effect to be negligible except for YOBr. Calculations of phonons and elastic constants showed that all the compounds studied here are both dynamically and mechanically stable. YOF and YOI are found to be indirect band gap insulators while YOCl and YOBr are direct band gap insulators. The band gap is found to decrease as we move from fluorine to iodine, while the calculated refractive index shows the opposite trend. As the band gap decreases on going down the periodic table from YOF to YOI, the luminescence increases. The excitonic binding energy calculated, within the effective mass approximation, is found to be more for YOF than the remaining compounds, suggesting that the excitonic effect to be more in YOF than the other compounds. The optical properties are calculated within the Time-Dependent Density Functional Theory (TDDFT) and compared with results obtained within the random phase approximation. The TDDFT calculations, using the newly developed bootstrap exchange-correlation kernel, showed significant excitonic effects in all the compounds studied here.

  10. Odor compound detection in male euglossine bees.

    PubMed

    Schiestl, F P; Roubik, D W

    2003-01-01

    Male euglossine bees collect fragrances from various sources, which they store and use for as yet unknown purposes. They are attracted, often specifically, to single odor compounds and blends thereof. We used gas chromatography with electroantennographic detection (GC-EAD) and electroantennography (EAG) to investigate the response to 8 odor compounds by males of two euglossine species, Euglossa cybelia Moure and Eulaema polychroma (Mocsàry). In E. cybelia, we recorded EAD reactions in response to 1,8-cineole, methyl benzoate, benzyl actetate, methyl salicylate, eugenol, and methyl cinnamate. E. polychroma responded to the same compounds in EAG experiments, while (1s)(-)alpha-pinene and beta-pinene failed to trigger EAD or EAG responses in the bees. Blends of two compounds triggered larger responses than single compounds in EAG experiments with E. polychroma, however, when alpha-pinene was added, reactions decreased. In the light of existing data on the bees' behavior towards these odor compounds, our work indicates that both peripheral and central nervous processes influence the attraction of euglossine bees to odors.

  11. Using Deep Learning for Compound Selectivity Prediction.

    PubMed

    Zhang, Ruisheng; Li, Juan; Lu, Jingjing; Hu, Rongjing; Yuan, Yongna; Zhao, Zhili

    2016-01-01

    Compound selectivity prediction plays an important role in identifying potential compounds that bind to the target of interest with high affinity. However, there is still short of efficient and accurate computational approaches to analyze and predict compound selectivity. In this paper, we propose two methods to improve the compound selectivity prediction. We employ an improved multitask learning method in Neural Networks (NNs), which not only incorporates both activity and selectivity for other targets, but also uses a probabilistic classifier with a logistic regression. We further improve the compound selectivity prediction by using the multitask learning method in Deep Belief Networks (DBNs) which can build a distributed representation model and improve the generalization of the shared tasks. In addition, we assign different weights to the auxiliary tasks that are related to the primary selectivity prediction task. In contrast to other related work, our methods greatly improve the accuracy of the compound selectivity prediction, in particular, using the multitask learning in DBNs with modified weights obtains the best performance.

  12. Carbonyl compounds generated from electronic cigarettes.

    PubMed

    Bekki, Kanae; Uchiyama, Shigehisa; Ohta, Kazushi; Inaba, Yohei; Nakagome, Hideki; Kunugita, Naoki

    2014-10-28

    Electronic cigarettes (e-cigarettes) are advertised as being safer than tobacco cigarettes products as the chemical compounds inhaled from e-cigarettes are believed to be fewer and less toxic than those from tobacco cigarettes. Therefore, continuous careful monitoring and risk management of e-cigarettes should be implemented, with the aim of protecting and promoting public health worldwide. Moreover, basic scientific data are required for the regulation of e-cigarette. To date, there have been reports of many hazardous chemical compounds generated from e-cigarettes, particularly carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, and glyoxal, which are often found in e-cigarette aerosols. These carbonyl compounds are incidentally generated by the oxidation of e-liquid (liquid in e-cigarette; glycerol and glycols) when the liquid comes in contact with the heated nichrome wire. The compositions and concentrations of these compounds vary depending on the type of e-liquid and the battery voltage. In some cases, extremely high concentrations of these carbonyl compounds are generated, and may contribute to various health effects. Suppliers, risk management organizations, and users of e-cigarettes should be aware of this phenomenon.

  13. Carbonyl Compounds Generated from Electronic Cigarettes

    PubMed Central

    Bekki, Kanae; Uchiyama, Shigehisa; Ohta, Kazushi; Inaba, Yohei; Nakagome, Hideki; Kunugita, Naoki

    2014-01-01

    Electronic cigarettes (e-cigarettes) are advertised as being safer than tobacco cigarettes products as the chemical compounds inhaled from e-cigarettes are believed to be fewer and less toxic than those from tobacco cigarettes. Therefore, continuous careful monitoring and risk management of e-cigarettes should be implemented, with the aim of protecting and promoting public health worldwide. Moreover, basic scientific data are required for the regulation of e-cigarette. To date, there have been reports of many hazardous chemical compounds generated from e-cigarettes, particularly carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, and glyoxal, which are often found in e-cigarette aerosols. These carbonyl compounds are incidentally generated by the oxidation of e-liquid (liquid in e-cigarette; glycerol and glycols) when the liquid comes in contact with the heated nichrome wire. The compositions and concentrations of these compounds vary depending on the type of e-liquid and the battery voltage. In some cases, extremely high concentrations of these carbonyl compounds are generated, and may contribute to various health effects. Suppliers, risk management organizations, and users of e-cigarettes should be aware of this phenomenon. PMID:25353061

  14. Antimalarial compounds in Phase II clinical development.

    PubMed

    Held, Jana; Jeyaraj, Sankarganesh; Kreidenweiss, Andrea

    2015-03-01

    Malaria is a major health problem in endemic countries and chemotherapy remains the most important tool in combating it. Treatment options are limited and essentially rely on a single drug class - the artemisinins. Efforts are ongoing to restrict the evolving threat of artemisinin resistance but declining sensitivity has been reported. Fueled by the ambitious aim of malaria eradication, novel antimalarial compounds, with improved properties, are now in the progressive phase of drug development. Herein, the authors describe antimalarial compounds currently in Phase II clinical development and present the results of these investigations. Thanks to recent efforts, a number of promising antimalarial compounds are now in the pipeline. First safety data have been generated for all of these candidates, although their efficacy as antimalarials is still unclear for most of them. Of particular note are KAE609, KAF156 and DSM265, which are of chemical scaffolds new to malaria chemotherapy and would truly diversify antimalarial options. Apart from SAR97276, which also has a novel chemical scaffold that has had its development stopped, all other compounds in the pipeline belong to already known substance classes, which have been chemically modified. At this moment in time, there is not one standout compound that will revolutionize malaria treatment but several compounds that will add to its control in the future.

  15. Biodegradation of aromatic compounds by Escherichia coli.

    PubMed

    Díaz, E; Ferrández, A; Prieto, M A; García, J L

    2001-12-01

    Although Escherichia coli has long been recognized as the best-understood living organism, little was known about its abilities to use aromatic compounds as sole carbon and energy sources. This review gives an extensive overview of the current knowledge of the catabolism of aromatic compounds by E. coli. After giving a general overview of the aromatic compounds that E. coli strains encounter and mineralize in the different habitats that they colonize, we provide an up-to-date status report on the genes and proteins involved in the catabolism of such compounds, namely, several aromatic acids (phenylacetic acid, 3- and 4-hydroxyphenylacetic acid, phenylpropionic acid, 3-hydroxyphenylpropionic acid, and 3-hydroxycinnamic acid) and amines (phenylethylamine, tyramine, and dopamine). Other enzymatic activities acting on aromatic compounds in E. coli are also reviewed and evaluated. The review also reflects the present impact of genomic research and how the analysis of the whole E. coli genome reveals novel aromatic catabolic functions. Moreover, evolutionary considerations derived from sequence comparisons between the aromatic catabolic clusters of E. coli and homologous clusters from an increasing number of bacteria are also discussed. The recent progress in the understanding of the fundamentals that govern the degradation of aromatic compounds in E. coli makes this bacterium a very useful model system to decipher biochemical, genetic, evolutionary, and ecological aspects of the catabolism of such compounds. In the last part of the review, we discuss strategies and concepts to metabolically engineer E. coli to suit specific needs for biodegradation and biotransformation of aromatics and we provide several examples based on selected studies. Finally, conclusions derived from this review may serve as a lead for future research and applications.

  16. Biodegradation of Aromatic Compounds by Escherichia coli

    PubMed Central

    Díaz, Eduardo; Ferrández, Abel; Prieto, María A.; García, José L.

    2001-01-01

    Although Escherichia coli has long been recognized as the best-understood living organism, little was known about its abilities to use aromatic compounds as sole carbon and energy sources. This review gives an extensive overview of the current knowledge of the catabolism of aromatic compounds by E. coli. After giving a general overview of the aromatic compounds that E. coli strains encounter and mineralize in the different habitats that they colonize, we provide an up-to-date status report on the genes and proteins involved in the catabolism of such compounds, namely, several aromatic acids (phenylacetic acid, 3- and 4-hydroxyphenylacetic acid, phenylpropionic acid, 3-hydroxyphenylpropionic acid, and 3-hydroxycinnamic acid) and amines (phenylethylamine, tyramine, and dopamine). Other enzymatic activities acting on aromatic compounds in E. coli are also reviewed and evaluated. The review also reflects the present impact of genomic research and how the analysis of the whole E. coli genome reveals novel aromatic catabolic functions. Moreover, evolutionary considerations derived from sequence comparisons between the aromatic catabolic clusters of E. coli and homologous clusters from an increasing number of bacteria are also discussed. The recent progress in the understanding of the fundamentals that govern the degradation of aromatic compounds in E. coli makes this bacterium a very useful model system to decipher biochemical, genetic, evolutionary, and ecological aspects of the catabolism of such compounds. In the last part of the review, we discuss strategies and concepts to metabolically engineer E. coli to suit specific needs for biodegradation and biotransformation of aromatics and we provide several examples based on selected studies. Finally, conclusions derived from this review may serve as a lead for future research and applications. PMID:11729263

  17. Basics of compounding: implementing United States pharmacopeia chapter <795> pharmaceutical compounding--nonsterile preparations, part 4.

    PubMed

    Allen, Loyd V

    2012-01-01

    Compounding pharmacists must participate in the standards set forth in the United States Pharmacopeia. Chapters <795> and <1075> within the United States Pharmacopeia have been combined and revised and new categories included. It is incumbent upon the compounder to maintain knowledge and skill in all categories of compounding that occurs in the facility. Therefore, pharmacists should acquire and study the newly revised chapter. This article concludes the four-part discussion on the newly revised United States Pharmacopeia Chapter <795>. Our purpose for these discussions was to bring to your attention that Chapter <795> and Chapter <1075> were combined and to highlight the most important changes and their effect on compounding pharmacy.

  18. Chemical effect on diffusion in intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Chen, Yi-Ting

    With the trend of big data and the Internet of things, we live in a world full of personal electronic devices and small electronic devices. In order to make the devices more powerful, advanced electronic packaging such as wafer level packaging or 3D IC packaging play an important role. Furthermore, ?-bumps, which connect silicon dies together with dimension less than 10 ?m, are crucial parts in advanced packaging. Owing to the dimension of ?-bumps, they transform into intermetallic compound from tin based solder after the liquid state bonding process. Moreover, many new reliability issues will occur in electronic packaging when the bonding materials change; in this case, we no longer have tin based solder joint, instead, we have intermetallic compound ?-bumps. Most of the potential reliability issues in intermetallic compounds are caused by the chemical reactions driven by atomic diffusion in the material; thus, to know the diffusivities of atoms inside a material is significant and can help us to further analyze the reliability issues. However, we are lacking these kinds of data in intermetallic compound because there are some problems if used traditional Darken's analysis. Therefore, we considered Wagner diffusivity in our system to solve the problems and applied the concept of chemical effect on diffusion by taking the advantage that large amount of energy will release when compounds formed. Moreover, by inventing the holes markers made by Focus ion beam (FIB), we can conduct the diffusion experiment and obtain the tracer diffusivities of atoms inside the intermetallic compound. We applied the technique on Ni3Sn4 and Cu3Sn, which are two of the most common materials in electronic packaging, and the tracer diffusivities are measured under several different temperatures; moreover, microstructure of the intermetallic compounds are investigated to ensure the diffusion environment. Additionally, the detail diffusion mechanism was also discussed in aspect of diffusion

  19. Nature of phenolic compounds in coffee melanoidins.

    PubMed

    Coelho, Carina; Ribeiro, Miguel; Cruz, Ana C S; Domingues, M Rosário M; Coimbra, Manuel A; Bunzel, Mirko; Nunes, Fernando M

    2014-08-06

    Phenolic compounds are incorporated into coffee melanoidins during roasting mainly in condensed form (42-62 mmol/100 g) and also in ester-linked form (1.1-1.6 mmol/100 g), with incorporation levels depending on the green coffee chlorogenic acid content. The phenolic compounds are incorporated in different coffee melanoidin populations, but mainly in those soluble in 75% ethanol (82%), a significant correlation between the amount of phenolic compounds and the amount of protein and color characteristics of the different melanoidin populations being observed. The incorporation of phenolic compounds into coffee melanoidins is a significant pathway of chlorogenic acid degradation during roasting, representing 23% of the chlorogenic acids lost. These account for the nearly 26% of the material not accounted for by polysaccharides and proteins present in coffee melanodins. The cleavage mechanism and the efficiency of alkaline fusion used to release condensed phenolics from coffee melanoidins suggest that the phenolic compounds can be linked to the polymeric material by aryl-ether, stilbene type, and/or biphenyl linkages.

  20. Possible complex organic compounds on Mars.

    PubMed

    Kobayashi, K; Sato, T; Kajishima, S; Kaneko, T; Ishikawa, Y; Saito, T

    1997-01-01

    It is suggested that primitive Mars had somehow similar environments as primitive Earth. If life was born on the primitive earth using organic compounds which were produced from the early Earth environment, the same types of organic compounds were also formed on primitive Mars. Such organic compounds might have been preserved on Mars still now. We are studying possible organic formation on primitive and present Mars. A gaseous mixture of CO2, CO, N2 and H2O with various mixing ratios were irradiated with high energy protons (major components of cosmic rays). Hydrogen cyanide and formaldehyde were detected among volatile products, and yellow-brown-colored water-soluble non-volatile substances were produced, which gave amino acids after acid-hydrolysis. Major part of "amino acid precursors" were not simple molecules like aminonitriles, but complex compounds which eluted earlier than free amino acids in cation-exchange HPLC. These organic compounds should be major targets in the future Mars mission. Strategy for the detection of the complex organics on Mars will be discussed.

  1. Basics and prospective of magnetic Heusler compounds

    SciTech Connect

    Felser, Claudia Wollmann, Lukas; Chadov, Stanislav; Fecher, Gerhard H.; Parkin, Stuart S. P.

    2015-04-01

    Heusler compounds are a remarkable class of materials with more than 1000 members and a wide range of extraordinary multi-functionalities including halfmetallic high-temperature ferri- and ferromagnets, multi-ferroics, shape memory alloys, and tunable topological insulators with a high potential for spintronics, energy technologies, and magneto-caloric applications. The tunability of this class of materials is exceptional and nearly every functionality can be designed. Co{sub 2}-Heusler compounds show high spin polarization in tunnel junction devices and spin-resolved photoemission. Manganese-rich Heusler compounds attract much interest in the context of spin transfer torque, spin Hall effect, and rare earth free hard magnets. Most Mn{sub 2}-Heusler compounds crystallize in the inverse structure and are characterized by antiparallel coupling of magnetic moments on Mn atoms; the ferrimagnetic order and the lack of inversion symmetry lead to the emergence of new properties that are absent in ferromagnetic centrosymmetric Heusler structures, such as non-collinear magnetism, topological Hall effect, and skyrmions. Tetragonal Heusler compounds with large magneto crystalline anisotropy can be easily designed by positioning the Fermi energy at the van Hove singularity in one of the spin channels. Here, we give a comprehensive overview and a prospective on the magnetic properties of Heusler materials.

  2. Determination of arsenic compounds in earthworms

    SciTech Connect

    Geiszinger, A.; Goessler, W.; Kuehnelt, D.; Kosmus, W.; Francesconi, K.

    1998-08-01

    Earthworms and soil collected from six sites in Styria, Austria, were investigated for total arsenic concentrations by ICP-MS and for arsenic compounds by HPLC-ICP-MS. Total arsenic concentrations ranged from 3.2 to 17.9 mg/kg dry weight in the worms and from 5.0 to 79.7 mg/kg dry weight in the soil samples. There was no strict correlation between the total arsenic concentrations in the worms and soil. Arsenic compounds were extracted from soil and a freeze-dried earthworm sample with a methanol/water mixture (9:1, v/v). The extracts were evaporated to dryness, redissolved in water, and chromatographed on an anion- and a cation-exchange column. Arsenic compounds were identified by comparison of the retention times with known standards. Only traces of arsenic acid could be extracted from the soil with the methanol/water (9:1, v/v) mixture. The major arsenic compounds detected in the extracts of the earthworms were arsenous acid and arsenic acid. Arsenobetaine was present as a minor constituent, and traces of dimethylarsinic acid were also detected. Two dimethylarsinoyltribosides were also identified in the extracts by co-chromatography with standard compounds. This is the first report of the presence of dimethylarsinoylribosides in a terrestrial organism. Two other minor arsenic species were present in the extract, but their retention times did not match with the retention times of the available standards.

  3. Reflectance spectroscopy of organic compounds: 1. Alkanes

    USGS Publications Warehouse

    Clark, R.N.; Curchin, J.M.; Hoefen, T.M.; Swayze, G.A.

    2009-01-01

    Reflectance spectra of the organic compounds comprising the alkane series are presented from the ultraviolet to midinfrared, 0.35 to 15.5 /??m. Alkanes are hydrocarbon molecules containing only single carbon-carbon bonds, and are found naturally on the Earth and in the atmospheres of the giant planets and Saturn's moon, Titan. This paper presents the spectral properties of the alkanes as the first in a series of papers to build a spectral database of organic compounds for use in remote sensing studies. Applications range from mapping the environment on the Earth, to the search for organic molecules and life in the solar system and throughout the. universe. We show that the spectral reflectance properties of organic compounds are rich, with major diagnostic spectral features throughout the spectral range studied. Little to no spectral change was observed as a function of temperature and only small shifts and changes in the width of absorption bands were observed between liquids and solids, making remote detection of spectral properties throughout the solar system simpler. Some high molecular weight organic compounds contain single-bonded carbon chains and have spectra similar to alkanes even ' when they fall into other families. Small spectral differences are often present allowing discrimination among some compounds, further illustrating the need to catalog spectral properties for accurate remote sensing identification with spectroscopy.

  4. Process for production of a borohydride compound

    DOEpatents

    Allen, Nathan Tait; Butterick, III, Robert; Chin, Arthur Achhing; Millar, Dean Michael; Molzahn, David Craig

    2014-08-19

    A process for production of a borohydride compound M(BH.sub.4).sub.y. The process has three steps. The first step combines a compound of formula (R.sup.1O).sub.yM with aluminum, hydrogen and a metallic catalyst containing at least one metal selected from the group consisting of titanium, zirconium, hafnium, niobium, vanadium, tantalum and iron to produce a compound of formula M(AlH.sub.3OR.sup.1).sub.y, wherein R.sup.1 is phenyl or phenyl substituted by at least one alkyl or alkoxy group; M is an alkali metal, Be or Mg; and y is one or two; wherein the catalyst is present at a level of at least 200 ppm based on weight of aluminum. The second step combines the compound of formula M(AlH.sub.3OR.sup.1).sub.y with a borate, boroxine or borazine compound to produce M(BH.sub.4).sub.y and a byproduct mixture containing alkali metal and aluminum aryloxides. The third step separates M(BH.sub.4).sub.y from the byproduct mixture.

  5. Stability of compounded thioguanine oral suspensions.

    PubMed

    Aliabadi, Hamidreza Montazeri; Romanick, Marcel; Somayaji, Vishwa; Mahdipoor, Parvin; Lavasanifar, Afsaneh

    2011-05-15

    PURPOSE. Updated information on the stability of compounded thioguanine oral suspensions prepared with currently available ingredients, as well as results of testing to determine if the addition of an antioxidant could extend shelf life by inhibiting formation of guanine, are presented. METHODS. Using triturated thioguanine tablets, three compounded suspensions were prepared: (1) a reference formulation containing methylcellulose and simple syrup, (2) an equivalent formulation using Ora-Plus and Ora-Sweet, and (3) an antioxidant-containing formulation prepared by adding ascorbic acid to the equivalent formulation. The compounded batches were stored at room temperature (19-23 °C). The chemical stability of the suspensions was evaluated immediately after compounding and at weekly intervals by a validated liquid chromatography-mass spectrometry (LCMS) assay method; physical stability was evaluated by regular visual checks and weekly pH testing. RESULTS. As demonstrated by serial LCMS testing, mean thioguanine levels in sampled batches of all three suspensions remained above accepted standards and mean guanine formation remained within acceptable limits for up to 63 days. The addition of ascorbic acid appeared to slow guanine formation but did not significantly extend the shelf life of the suspension. CONCLUSION. Compounded oral suspensions of thioguanine 20 mg/mL exhibited acceptable chemical and physical stability for up to nine weeks at 19-23 °C. The addition of ascorbic acid at a concentration of 0.1% to the suspension was not effective in consistently increasing the shelf life of the thioguanine suspensions.

  6. The Chemistry of Nitroxyl-Releasing Compounds

    PubMed Central

    DuMond, Jenna F.

    2011-01-01

    Abstract Nitroxyl (HNO) demonstrates a diverse and unique biological profile compared to nitric oxide, a redox-related compound. Although numerous studies support the use of HNO as a therapeutic agent, the inherent chemical reactivity of HNO requires the use of donor molecules. Two general chemical strategies currently exist for HNO generation from nitrogen-containing molecules: (i) the disproportionation of hydroxylamine derivatives containing good leaving groups attached to the nitrogen atom and (ii) the decomposition of nitroso compounds (X-N=O, where X represents a good leaving group). This review summarizes the synthesis and structure, the HNO-releasing mechanisms, kinetics and by-product formation, and alternative reactions of six major groups of HNO donors: Angeli's salt, Piloty's acid and its derivatives, cyanamide, diazenium diolate-derived compounds, acyl nitroso compounds, and acyloxy nitroso compounds. A large body of work exists defining these six groups of HNO donors and the overall chemistry of each donor requires consideration in light of its ability to produce HNO. The increasing interest in HNO biology and the potential of HNO-based therapeutics presents exciting opportunities to further develop HNO donors as both research tools and potential treatments. Antioxid. Redox Signal. 14, 1637–1648. PMID:21235345

  7. Bio-inspired hemispherical compound eye camera

    NASA Astrophysics Data System (ADS)

    Xiao, Jianliang; Song, Young Min; Xie, Yizhu; Malyarchuk, Viktor; Jung, Inhwa; Choi, Ki-Joong; Liu, Zhuangjian; Park, Hyunsung; Lu, Chaofeng; Kim, Rak-Hwan; Li, Rui; Crozier, Kenneth B.; Huang, Yonggang; Rogers, John A.

    2014-03-01

    Compound eyes in arthropods demonstrate distinct imaging characteristics from human eyes, with wide angle field of view, low aberrations, high acuity to motion and infinite depth of field. Artificial imaging systems with similar geometries and properties are of great interest for many applications. However, the challenges in building such systems with hemispherical, compound apposition layouts cannot be met through established planar sensor technologies and conventional optics. We present our recent progress in combining optics, materials, mechanics and integration schemes to build fully functional artificial compound eye cameras. Nearly full hemispherical shapes (about 160 degrees) with densely packed artificial ommatidia were realized. The number of ommatidia (180) is comparable to those of the eyes of fire ants and bark beetles. The devices combine elastomeric compound optical elements with deformable arrays of thin silicon photodetectors, which were fabricated in the planar geometries and then integrated and elastically transformed to hemispherical shapes. Imaging results and quantitative ray-tracing-based simulations illustrate key features of operation. These general strategies seem to be applicable to other compound eye devices, such as those inspired by moths and lacewings (refracting superposition eyes), lobster and shrimp (reflecting superposition eyes), and houseflies (neural superposition eyes).

  8. In vitro disposition profiling of heterocyclic compounds.

    PubMed

    Keemink, Janneke; Wuyts, Benjamin; Nicolaï, Johan; Jonghe, Steven De; Stella, Alessandro; Herdewijn, Piet; Augustijns, Patrick; Annaert, Pieter

    2015-08-01

    Compound libraries that are screened for biological activity commonly contain heterocycles. Besides potency, drug-like properties need to be evaluated to ensure in vivo efficacy of test compounds. In this context, we determined hepatic and intestinal disposition profiles for 17 heterocyclic compounds. All studied compounds showed rapid uptake in suspended rat hepatocytes, whereas metabolism was poor and the rate-limiting step in hepatic elimination. In vitro assays demonstrated a relatively low solubility and high intestinal permeability. Based on these in vitro data, heterocycles were categorized in the biopharmaceutics classification system (BCS) and the biopharmaceutics drug disposition classification system (BDDCS) to predict disposition characteristics before clinical data are available. Our findings emphasized the importance to use hepatocytes in addition to microsomes to study metabolism, since the latter lack non-microsomal enzymes and cellular context. Moreover, intracellular exposure should be considered to gain insight in the relevant fraction of the compound available at the enzymatic site. Finally, the study reveals discrepancies associated with the classification of heterocycles in BCS versus BDDCS. These probably originate from the binary character of both systems. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Hybrid Compounds as Multitarget Directed Anticancer Agents.

    PubMed

    Kucuksayan, Ertan; Ozben, Tomris

    2017-01-01

    Cancer is a multifactorial disease including interactions of complex genetic and environmental factors. Clinical efficacy of anticancer chemotherapies is hampered by various factors including multidrug resistance (MDR). There is a strong need to discover more potent novel cancer drugs to kill cancer cells selectively. The recent new strategy for cancer treatment involves the design and synthesis of hybrid compounds as multitargeted anticancer agents. In this review, we focus on studies using hybrid compounds which were designed and synthesized from two or more different bioactive moieties conjugating them into a single hybrid drug. Hybrid compounds having more than a single target have been considered as more efficient and potent anticancer agents, since it is almost impossible to destroy cancer cells with a single target. Hybrid compounds overcome many disadvantages of single cancer drugs such as low solubility, adverse effects, and multi drug resistance. We have compiled the data of recent studies using the new hybrid anticancer drugs in cancer treatment. Thus, the design, synthesis and clinical trials of new hybrid compounds should be continued and supported in future. Results of recent studies have proved that they have a great potential to be used as novel anticancer drugs. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  10. Phenolic compounds in Rosaceae fruits from Ecuador.

    PubMed

    Vasco, Catalina; Riihinen, Kaisu; Ruales, Jenny; Kamal-Eldin, Afaf

    2009-02-25

    RP-HPLC-DAD was used to study the content of phenolic compounds in four Ecuadorian fruits (strawberry, Andean blackberry, plum, and capuli cherry). Compounds were identified using spectral characteristics of representative standards and reference samples. Further, LC-MS with MS/MS was used to confirm molecular assignments in previously unstudied capuli cherry. Gallic acid was detected in Andean blackberry, and galloyl esters were detected in strawberries. Both these berries contained ellagic acid derivatives as major compounds, followed by anthocyanins, cyanidin, and pelargonidin glycosides. Plums and capuli cherry showed similar profiles of phenolic compounds, with chlorogenic and neochlorogenic acids being the most important hydroxycinnamates. (-)-Epicatechin was found in high amounts in Andean blackberry, plums, and capuli cherry, while (+)-catechin was only found in capuli cherry. Proanthocyanidins were major compounds in all fruits, and all contained considerable amounts of quercetin derivatives and smaller amounts of kaempferol derivatives. LC-MS analysis of capuli cherry revealed dimeric and trimeric procyanidins, quercetin and kaempferol hexosides and pentosides, and a kaempferol-O,C-dipentoside.

  11. Cerium-iron-based magnetic compounds

    DOEpatents

    Zhou, Chen; Pinkerton, Frederick E.; Herbst, Jan F.

    2017-01-17

    New magnetic materials containing cerium, iron, and small additions of a third element are disclosed. These materials comprise compounds Ce(Fe.sub.12-xM.sub.x) where x=1-4, having the ThMn.sub.12 tetragonal crystal structure (space group I4/mmm, #139). Compounds with M=B, Al, Si, P, S, Sc, Co, Ni, Zn, Ga, Ge, Zr, Nb, Hf, Ta, and W are identified theoretically, and one class of compounds based on M=Si has been synthesized. The Si cognates are characterized by large magnetic moments (4.pi.M.sub.s greater than 1.27 Tesla) and high Curie temperatures (264.ltoreq.T.sub.c.ltoreq.305.degree. C.). The Ce(Fe.sub.12-xM.sub.x) compound may contain one or more of Ti, V, Cr, and Mo in combination with an M element. Further enhancement in T.sub.c is obtained by nitriding the Ce compounds through heat treatment in N.sub.2 gas while retaining the ThMn.sub.12 tetragonal crystal structure; for example CeFe.sub.10Si.sub.2N.sub.1.29 has T.sub.c=426.degree. C.

  12. Organometallic compounds: an opportunity for chemical biology?

    PubMed

    Patra, Malay; Gasser, Gilles

    2012-06-18

    Organometallic compounds are renowned for their remarkable applications in the field of catalysis, but much less is known about their potential in chemical biology. Indeed, such compounds have long been considered to be either unstable under physiological conditions or cytotoxic. As a consequence, little attention has been paid to their possible utilisation for biological purposes. Because of their outstanding physicochemical properties, which include chemical stability, structural diversity and unique photo- and electrochemical properties, however, organometallic compounds have the ability to play a leading role in the field of chemical biology. Indeed, remarkable examples of the use of such compounds-notably as enzyme inhibitors and as luminescent agents-have recently been reported. Here we summarise recent advances in the use of organometallic compounds for chemical biology purposes, an area that we define as "organometallic chemical biology". We also demonstrate that these recent discoveries are only a beginning and that many other organometallic complexes are likely to be found useful in this field of research in the near future.

  13. Bioactive compounds from the fern Lepisorus contortus.

    PubMed

    Yang, Jian-Hong; Kondratyuk, Tamara P; Jermihov, Katherine C; Marler, Laura E; Qiu, Xi; Choi, Yongsoo; Cao, Hongmei; Yu, Rui; Sturdy, Megan; Huang, Rong; Liu, Ying; Wang, Li-Qin; Mesecar, Andrew D; van Breemen, Richard B; Pezzuto, John M; Fong, Harry H S; Chen, Ye-Gao; Zhang, Hong-Jie

    2011-02-25

    Phytochemical investigation of the whole plant of Lepisorus contortus (Christ) Ching led to the isolation of five new phenylethanoid glycosides (1-5), each containing a caffeoyl group, a new flavonoid glycoside (10), and 14 known compounds (6-9 and 11-15, syringic acid, vanillic acid, phloretic acid, diplopterol, and β-sitosterol). This is the first report of phenylethanoid glycosides from the family Polypodiaceae. Compounds 1-15 were evaluated for their cancer chemopreventive potential based on their ability to inhibit tumor necrosis factor alpha (TNF-α)-induced NF-κB activity, nitric oxide (NO) production, and aromatase, quinone reductase 2 (QR-2), and COX-1/-2 activities. Quercetin-3-O-β-d-glucoside (15) demonstrated inhibition against QR2 with an IC(50) value of 3.84 μM, which confirmed kaempferol/quercetin glycosides as the active compounds to inhibit QR2. The compound also demonstrated NF-κB activity with an IC(50) value of 33.6 μM. In addition, compounds 1, 2, 4, and 6 showed aromatase activity with IC(50) values of 30.7, 32.3, 26.8, and 35.3 μM, respectively.

  14. Bioactive Compounds from the Fern Lepisorus contortus

    PubMed Central

    Yang, Jian-Hong; Kondratyuk, Tamara P.; Jermihov, Katherine C.; Marler, Laura E.; Qiu, Xi; Choi, Yongsoo; Cao, Hongmei; Yu, Rui; Sturdy, Megan; Huang, Rong; Liu, Ying; Wang, Li-Qin; Mesecar, Andrew D.; van Breemen, Richard B.; Pezzuto, John M.; Fong, Harry H. S.; Chen, Ye-Gao; Zhang, Hong-Jie

    2011-01-01

    Phytochemical investigation of the whole plant of Lepisorus contortus (Christ) Ching led to the isolation of five new phenylethanoid glycosides (1–5), each containing a caffeoyl group, a new flavonoid glycoside (10), as well as 14 known compounds (6–9 and 11–15, syringic acid, vanillic acid, phloretic acid, diplopterol, and β-sitosterol). This is the first report of phenylethanoid glycosides from the family Polypodiaceae. Compounds 1–15 were evaluated for their cancer chemopreventive potential based on their ability to inhibit tumor necrosis factor alpha (TNF-α)-induced NF-κB activity, nitric oxide (NO) production, aromatase, quinone reductase 2 (QR-2), and COX-1/-2 activities. Quercetin-3-O-β-D-glucoside (15) demonstrated inhibition against QR2 with an IC50 value of 6.7 µM, which confirmed kaempferol/quercetin glycosides as the active compounds to inhibit QR2. The compound also demonstrated NF-κB activity with an IC50 value of 33.6 µM. In addition, compounds 1, 2, 4 and 6 showed aromatase activity with IC50 values of 30.7, 32.3, 26.8, and 35.3 µM, respectively. PMID:21261296

  15. Polymers containing borane or carborane cage compounds and related applications

    DOEpatents

    Bowen, III, Daniel E; Eastwood, Eric A

    2013-04-23

    Polymers comprising residues of cage compound monomers having at least one polyalkoxy silyl substituent are provided. The cage compound monomers are selected from borane cage compound monomers comprising at least 7 cage atoms and/or carborane cage compound monomers comprising 7 to 11 cage compound monomers. Such polymers can further comprise one or more reactive matrices and/or co-monomers covalently bound with the cage compound monomer residues. Articles of manufacture comprising such polymers are also disclosed.

  16. SEPARATION PROCESS FOR ZIRCONIUM AND COMPOUNDS THEREOF

    DOEpatents

    Crandall, H.W.; Thomas, J.R.

    1959-06-30

    The separation of zirconium from columbium, rare earths, yttrium and the alkaline earth metals, such mixtures of elements occurring in zirconium ores or neutron irradiated uranium is described. According to the invention a suitable separation of zirconium from a one normal acidic aqueous solution containing salts, nitrates for example, of tetravalent zirconium, pentavalent columbium, yttrium, rare earths in the trivalent state and alkaline earths can be obtained by contacting the aqueous solution with a fluorinated beta diketonc alone or in an organic solvent solution, such as benzene, to form a zirconium chelate compound. When the organic solvent is present the zirconium chelate compound is directly extracted; otherwise it is separated by filtration. The zirconium may be recovered from contacting the organic solvent solution containing the chelated compound by back extraction with either an aqueous hydrofluoric acid or an oxalic acid solution.

  17. Feasibility of a complex compound heat pump

    NASA Astrophysics Data System (ADS)

    Rockenfeller, Uwe

    1987-07-01

    A feasibility study is described of a double effect gas fired heat pump using ammoniated solid vapor complex compounds as the working media. The cycle takes advantage of the coordinative characteristics of complex compound ligand bonds resulting in large coordination spheres with only one degree of freedom. The cycle has high efficiency, no moving parts, and minimum electrical parasitic requirements. Fluid properties of candidate materials were measured with respect to vapor pressure equilibria, coordination properties and thermal stability. Preliminary reaction rate measurements were performed in adsorption and desorption processes. A computer model of double effect cycle was developed in order to predict the operating performance of the candidate complex compound media. The computer model was used to determine preliminary heat balances and coefficients of performance.

  18. Heme compounds in dinosaur trabecular bone.

    PubMed

    Schweitzer, M H; Marshall, M; Carron, K; Bohle, D S; Busse, S C; Arnold, E V; Barnard, D; Horner, J R; Starkey, J R

    1997-06-10

    Six independent lines of evidence point to the existence of heme-containing compounds and/or hemoglobin breakdown products in extracts of trabecular tissues of the large theropod dinosaur Tyrannosaurus rex. These include signatures from nuclear magnetic resonance and electron spin resonance that indicate the presence of a paramagnetic compound consistent with heme. In addition, UV/visible spectroscopy and high performance liquid chromatography data are consistent with the Soret absorbance characteristic of this molecule. Resonance Raman profiles are also consistent with a modified heme structure. Finally, when dinosaurian tissues were extracted for protein fragments and were used to immunize rats, the resulting antisera reacted positively with purified avian and mammalian hemoglobins. The most parsimonious explanation of this evidence is the presence of blood-derived hemoglobin compounds preserved in the dinosaurian tissues.

  19. Microbial production of scent and flavor compounds.

    PubMed

    Carroll, Austin L; Desai, Shuchi H; Atsumi, Shota

    2016-02-01

    Scents and flavors like those of fresh oranges are no longer limited to just the natural product. Fruit, flower, and essential oil scents have found place in cosmetics, soaps, candles, and food amongst many common household products. With their increasing global demand and difficulty in extractation from the natural source, alternative methods of their production are being sought. One sustainable method is to employ microorganisms for the production of these high value compounds. With the tools of metabolic engineering, microorganisms can be modified to produce compounds such as esters, terpenoids, aldehydes, and methyl ketones. Approaches and challenges for the production of these compounds from microbial hosts are discussed in this review. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Energetic Compounds for Future Space Applications

    NASA Astrophysics Data System (ADS)

    Davenas, A.; Jacob, G.; Longevialle, Y.; Pérut, C.

    2004-10-01

    The need for new rocket propellants to improve or replace those in use today has led during the past ten years to studies of various, ancient or relatively new, energetic ingredients. The most often mentioned compounds for solid propellants are ADN (ammonium dinitramide), the nitramines RDX and HMX, HNIW (hexanitro hexaaza isowurtzitane), HNF (hydrazinum nitroformate), GAP (glycidyl azide polymer), and high nitrogen compounds. ADN, HNF, HAN (hydroxylammonium nitrate) are mentioned as possible ingredients in liquid mono and bi propellants for the future. A review of the work being conducted in the development and testing of the candidate propellants as well as an analysis of the general constraints of the industrial use and handling of these propellants and of their basic ingredients allows for a first tentative selection of the most promising ingredients. The possible synthesis routes, main characteristics, production and cost perspectives of these compounds are summarized and discussed.

  1. Bioactive Compounds Found in Brazilian Cerrado Fruits

    PubMed Central

    Bailão, Elisa Flávia Luiz Cardoso; Devilla, Ivano Alessandro; da Conceição, Edemilson Cardoso; Borges, Leonardo Luiz

    2015-01-01

    Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provides information about Cerrado fruits and highlights the structures and pharmacologic potential of functional compounds found in these fruits. Compounds detected in Caryocar brasiliense Camb. (pequi), Dipteryx alata Vog. (baru), Eugenia dysenterica DC. (cagaita), Eugenia uniflora L. (pitanga), Genipa americana L. (jenipapo), Hancornia speciosa Gomes (mangaba), Mauritia flexuosa L.f. (buriti), Myrciaria cauliflora (DC) Berg (jabuticaba), Psidium guajava L. (goiaba), Psidium spp. (araçá), Solanum lycocarpum St. Hill (lobeira), Spondias mombin L. (cajá), Annona crassiflora Mart. (araticum), among others are reported here. PMID:26473827

  2. Toxic organic compounds from energy production

    SciTech Connect

    Hites, R.A.

    1991-09-20

    The US Department of Energy's Office of Health and Environmental Research (OHER) has supported work in our laboratory since 1977. The general theme of this program has been the identification of potentially toxic organic compounds associated with various combustion effluents, following the fates of these compounds in the environment, and improving the analytical methodology for making these measurements. The projects currently investigation include: an improved sampler for semi-volatile compounds in the atmosphere; the wet and dry deposition of dioxins and furans from the atmosphere; the photodegradation and mobile sources of dioxins and furans; and the bioaccumulation of PAH by tree bark. These projects are all responsive to OHER's interest in the pathways and mechanisms by which energy-related agents move through and are modified by the atmosphere''. The projects on gas chromatographic and liquid chromatographic tandem mass spectrometry are both responsive to OHER's interest in new and more sensitive technologies for chemical measurements''. 35 refs., 9 figs.

  3. Half-Metallic Zinc-Blende Compounds

    NASA Astrophysics Data System (ADS)

    Dederichs, Peter H.; Galanakis, Iosif; Mavropoulos, Phivos

    2003-03-01

    Motivated by recent realisation of ferromagnetic zinc-blende CrAs and CrSb compounds by molecular beam epitaxy [1], we present systematic first-principles calculations for ordered zinc-blende compounds of the transition metal elements V, Cr, Mn with the sp elements N, P, As, Sb and S, Se, Te. These compounds exhibit a half-metallic behaviour over a wide range of lattice constants. We discuss the origin and trends of the half-metallic behaviour and the strong similarities to analogous dilute magnetic semiconductors. Based on calculations of the equilibrium lattice constants, we discuss the possibility to grow these half-metallic systems on suitable semiconductor substrates. [1] H. Akinaga, T. Manago, and M. Shirai, Jpn. J. Appl. Phys. 39, L1118 (2000).

  4. [Phenolic compounds in branches of Tamarix rasissima].

    PubMed

    Li, Juan; Li, Wei-Qi; Zheng, Ping; Wang, Rui; Yu, Jian-Qiang; Yang, Jian-Hong; Yao, Yao

    2014-06-01

    To study the chemical constituents of the branches of Tamarix rasissima, repeated silica gel column chromatography, Sephadex LH-20 chromatography and recrystallization were applied for chemical constituents isolation and purification. Ten phenolic compounds were isolated from the n-BuOH fraction and their structures were elucidated by physical properties and spectra analysis such as UV, ESI-MS and NMR as monodecarboxyellagic acid (1), ellagic acid (2), 3, 3'-di-O-methylellagic acid (3), 3, 3'-di-O-methylellagic acid-4-O-beta-D-glucopyranoside (4), 3, 3'-di-O-methylellagic acid-4'-O-alpha-D-arabinfuranoside (5), ferulic acid (6), isoferulic acid (7), caffeic acid (8), 4-O-acetyl-caffeic acid (9), and 4-methyl-1, 2-benzenediol (10). All compounds except for isoferulic acid were isolated firstly from this plant except for isoferulic acid, and compounds 5, 9 and 10 were obtained from Tamarix genus for the first time.

  5. Volatile compounds in shergottite and nakhlite meteorites

    NASA Technical Reports Server (NTRS)

    Gooding, James L.; Aggrey, Kwesi E.; Muenow, David W.

    1990-01-01

    Since discovery of apparent carbonate carbon in Nakhla, significant evidence has accumulated for occurrence of volatile compounds in shergotties and nakhlites. Results are presented from a study of volatile compounds in three shergottites, one nakhlite, and three eucrite control samples. Shergotties ALHA77005, EETA79001, and Shergotty, and the nakhlite Nakhla, all contain oxidized sulfur (sulfate) of preterrestrial origin; sulfur oxidation is most complete in EETA79001/Lith-C. Significant bulk carbonate was confirmed in Nakhla and trace carbonate was substantiated for EETA79001, all of which appears to be preterrestrial in origin. Chlorine covaries with oxidized sulfur, whereas carbonate and sulfate are inversely related. These volatile compounds were probably formed in a highly oxidizing, aqueous environment sometime in the late stage histories of the rocks that are now represented as meteorites. They are consistent with the hypothesis that shergottite and nakhlite meteorites originated on Mars and that Mars has supported aqueous geochemistry during its history.

  6. New heterocyclic compounds from Ranunculus ternatus Thunb.

    PubMed

    Feng, Zi-Ming; Zhan, Zhi-Lai; Yang, Ya-Nan; Jiang, Jian-Shuang; Zhang, Pei-Cheng

    2017-10-01

    Five new heterocyclic compounds, 5-α-d-fructofuranosylmethyl-furfural (1), 5-β-d-fructofuranosylmethyl-furfural (2), 5-β-d-fructopyranosylmethyl-furfural (3), 4-(2-((2S-2,3-dihydroxypropoxy)methyl)-5-formyl-1H-pyrrol-1-yl)butanoic acid (4), and 3S,4S-4,5,8-trihydroxy-3-(prop-1-en-2-yl)isochroman-1-one (5), were obtained from the root of Ranunculus ternatus Thunb., which is a traditional Chinese anti-tuberculosis medicine. Their structures were elucidated by UV, IR, HRESIMS, NMR data, and the comparison of experimental and calculated electronic circular dichroism (ECD) spectra. Notably, compounds 1-3 are rarely occurring furfural fructosides in natural sources. These heterocyclic compounds could be further studied for the synthetic chemists and pharmacologists due to the source and structural properties. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Heme compounds in dinosaur trabecular bone

    PubMed Central

    Schweitzer, Mary H.; Marshall, Mark; Carron, Keith; Bohle, D. Scott; Busse, Scott C.; Arnold, Ernst V.; Barnard, Darlene; Horner, J. R.; Starkey, Jean R.

    1997-01-01

    Six independent lines of evidence point to the existence of heme-containing compounds and/or hemoglobin breakdown products in extracts of trabecular tissues of the large theropod dinosaur Tyrannosaurus rex. These include signatures from nuclear magnetic resonance and electron spin resonance that indicate the presence of a paramagnetic compound consistent with heme. In addition, UV/visible spectroscopy and high performance liquid chromatography data are consistent with the Soret absorbance characteristic of this molecule. Resonance Raman profiles are also consistent with a modified heme structure. Finally, when dinosaurian tissues were extracted for protein fragments and were used to immunize rats, the resulting antisera reacted positively with purified avian and mammalian hemoglobins. The most parsimonious explanation of this evidence is the presence of blood-derived hemoglobin compounds preserved in the dinosaurian tissues. PMID:9177210

  8. Volatile organic compounds from leaves litter.

    PubMed

    Isidorov, Valery; Jdanova, Maria

    2002-09-01

    Qualitative composition of volatile emissions of litter of five species of deciduous trees was investigated by GC-MS. The list of identified substances contains more than 70 organic compounds of various classes. It was established that the composition of components emitted by the litter into the gas phase greatly differs from that of essential oils extracted by hydrodistillation from turned leaves collected from trees during fall. It is suggested that most compounds found in litter emissions are products of vital activity of microorganisms decomposing it. The reported data indicate that after the vegetative period is over the decomposition processes of litter are important seasonal sources of reactive organic compounds under the forest canopy.

  9. Origin of organic compounds in carbonaceous chondrites

    NASA Astrophysics Data System (ADS)

    Cronin, J. R.

    Carbonaceous chondrites, a class of primitive meteorite, have long been known to contain their complement of carbon largely in the form of organic, i.e., hydrocarbon-related, matter. Both discrete organic compounds and an insoluble, macromolecular material are present. Several characteristics of these materials provide evidence for their abiotic origin. The principal formation hypothesis have invoked chemistry occurring either in the solar nebula or on the parent body. However, recent stable isotope analyses of the meteorite carboxylic acids and amino acids indicate that they may be related to interstellar cloud compounds. These results suggest a formation scheme in which interstellar compounds were incorporated into the parent body and subsequently converted to the present suite of meteorite organics by the hydrothermal process believed to have formed the clay minerals of the meteorite matrix.

  10. Analyzing method on biogenic volatile organic compounds

    NASA Astrophysics Data System (ADS)

    Bai, J. H.; Wang, M. X.; Hu, F.; Greenberg, J. P.; Guenther, A. B.

    2002-02-01

    In order to analyze biogenic volatile organic compounds in the atmosphere, an automated gas chromatography is developed and employed at the laboratory of National Center for Atmospheric Research (NCAR) during January to July, 2000. A small refrigerator was used so as to remove water in the air sample from gas line, and get accurate concentrations of volatile organic compounds. At 5degreesC, good water removing efficiency can be obtained at controlled flow rate. Air samples were collected around the building of Mesa Lab. of NCAR and analyzed by this gas chromatography system. This paper reports this gas chromatography system and results of air samples. The experimental results show that this gas chromatography system has a good reproducibility and stability, and main interesting volatile organic compounds such as isoprene, monoterpenes have an evident diurnal variation.

  11. New antitumor compounds from Carya cathayensis.

    PubMed

    Wu, Wei; Bi, Xiu-Li; Cao, Jia-Qing; Zhang, Kai-Qing; Zhao, Yu-Qing

    2012-03-01

    A new lignan (7R,8S,8'R)-4,4',9-trihydroxy-7,9'-epoxy-8,8'-lignan, and three new phenolics, carayensin-A, carayensin-B, and carayensin-C, together with 13 known compounds were isolated from the shells of Carya cathayensis. Their chemical structures were established mainly by 1D and 2D NMR techniques and mass spectrometry. All the compounds were evaluated for cytotoxicity against several human tumor types including human colorectal cancer cell lines (HCT-116, HT-29), human lung cancer cell line (A549), and human breast cancer cell line (MCF-7). The compounds 1, 5, 6, and 16 are considered to be potential as antitumor agents, which could significantly inhibit the cancer cell growth in a dose-dependent manner.

  12. [The vanadium compounds: chemistry, synthesis, insulinomimetic properties].

    PubMed

    Fedorova, E V; Buriakina, A V; Vorob'eva, N M; Baranova, N I

    2014-01-01

    The review considers the biological role of vanadium, its participation in various processes in humans and other mammals, and the anti-diabetic effect of its compounds. Vanadium salts have persistent hypoglycemic and antihyperlipidemic effects and reduce the probability of secondary complications in animals with experimental diabetes. The review contains a detailed description of all major synthesized vanadium complexes having antidiabetic activity. Currently, vanadium complexes with organic ligands are more effective and safer than the inorganic salts. Despite the proven efficacy of these compounds as the anti-diabetic agents in animal models, only one organic complex of vanadium is currently under the second phase of clinical trials. All of the considered data suggest that vanadium compound are a new promising class of drugs in modern pharmacotherapy of diabetes.

  13. Chemical compounds from Chenopodium album Linn.

    NASA Astrophysics Data System (ADS)

    Zheng, Wei

    2017-06-01

    Bioactive components from Chenopodium album Linn. were isolated and identified in this research. Light petroleum, dichloromethane and n-BuOH were firstly applied to partition the 75% EtOH extract of Chenopodium album Linn. which were then subjected to normal-phase silica, ODS silica gel column chromatography and semi-preparative HPLC chromatography. By the employment of NMR method in this study, chemical structures of the compounds were elucidated. Three known compounds were isolated from Chenopodium album Linn., and identified as Isolariciresinol 4-O-β-D-glucopyranoside (1), (7’S, 8R, 8’R)-Isolariciresinol (2) and (7’S, 8R, 8’S)-Isolariciresinol (3) by comparison of their spectral data with references. This is the first time that isolation of the compounds mentioned above from Chenopodium album Linn. was achieved.

  14. Photoinduced mass transport in azo compounds

    NASA Astrophysics Data System (ADS)

    Klismeta, K.; Teteris, J.; Aleksejeva, J.

    2013-12-01

    The photoinduced changes of optical properties in azobenzene containing compound thin films were studied under influence of polarized and non-polarized 532 nm laser light. Under influence of light azo compounds experience trans-cis isomerisation process, that can be observed in the absorbance spectrum of the sample. If the light is linearly polarized, molecules align perpendicularly to the electric field vector and as a result photoinduced dichroism and birefringence is obtained. If a known lateral polarization modulation of the light beam is present, mass transport of the azobenzene containing compound occurs. By measuring the surface relief with a profilometer the direction of mass transport can be determined. The studies of this work show that direct holographic recording of surface relief gratings can be used in optoelectronics, telecommunications and data storage.

  15. Magnetic susceptibilities of antiferromagnetic Re4+ compounds

    NASA Astrophysics Data System (ADS)

    Chatterjee, Ibha; Desai, V. P.

    1981-11-01

    The low-temperature (0-30 K) antiferromagnetic susceptibilites of hexachloro- and hexabromorhenates (K2ReCl6 and K2ReBr6) are explained by using correlated effective-field theory and considering XY symmetry of the exchange Hamiltonian. The theory gives a good account of the observed magnetic susceptibilities of these compounds and the sublattice magnetization of the K2ReCl6 compound. The nearest- and next-nearest-neighbor exchange integrals for these compounds are J1=-1.32 cm-1, J2=0.20 cm-1 for K2ReCl6 and J1=-1.82 cm-1, J2=0.15 cm-1 for K2ReBr6.

  16. Catalyst for Oxidation of Volatile Organic Compounds

    NASA Technical Reports Server (NTRS)

    Wood, George M. (Inventor); Upchurch, Billy T. (Inventor); Schryer, David R. (Inventor); Davis, Patricia P. (Inventor); Kielin, Erik J. (Inventor); Brown, Kenneth G. (Inventor); Schyryer, Jacqueline L. (Inventor); DAmbrosia, Christine M. (Inventor)

    2000-01-01

    Disclosed is a process for oxidizing volatile organic compounds to carbon dioxide and water with the minimal addition of energy. A mixture of the volatile organic compound and an oxidizing agent (e.g. ambient air containing the volatile organic compound) is exposed to a catalyst which includes a noble metal dispersed on a metal oxide which possesses more than one oxidation state. Especially good results are obtained when the noble metal is platinum, and the metal oxide which possesses more than one oxidation state is tin oxide. A promoter (i.e., a small amount of an oxide of a transition series metal) may be used in association with the tin oxide to provide very beneficial results.

  17. Global Exposure Modelling of Semivolatile Organic Compounds

    NASA Astrophysics Data System (ADS)

    Guglielmo, F.; Lammel, G.; Maier-Reimer, E.

    2008-12-01

    Organic compounds which are persistent and toxic as the agrochemicals γ-hexachlorocyclohexane (γ-HCH, lindane) and dichlorodiphenyltrichloroethane (DDT) pose a hazard for the ecosystems. These compounds are semivolatile, hence multicompartmental substances and subject to long-range transport (LRT) in atmosphere and ocean. Being lipophilic, they accumulate in exposed organism tissues and biomagnify along food chains. The multicompartmental global fate and LRT of DDT and lindane in the atmosphere and ocean have been studied using application data for 1980, on a decadal scale using a model based on the coupling of atmosphere and (for the first time for these compounds) ocean General Circulation Models (ECHAM5 and MPI-OM). The model system encompasses furthermore 2D terrestrial compartments (soil and vegetation) and sea ice, a fully dynamic atmospheric aerosol (HAM) module and an ocean biogeochemistry module (HAMOCC5). Large mass fractions of the compounds are found in soil. Lindane is also found in comparable amount in ocean. DDT has the longest residence time in almost all compartments. The sea ice compartment locally almost inhibits volatilization from the sea. The air/sea exchange is also affected , up to a reduction of 35 % for DDT by partitioning to the organic phases (suspended and dissolved particulate matter) in the global oceans. Partitioning enhances vertical transport in the sea. Ocean dynamics are found to be more significant for vertical transport than sinking associated with particulate matter. LRT in the global environment is determined by the fast atmospheric circulation. Net meridional transport taking place in the ocean is locally effective mostly via western boundary currents, upon applications at mid- latitudes. The pathways of the long-lived semivolatile organic compounds studied include a sequence of several cycles of volatilisation, transport in the atmosphere, deposition and transport in the ocean (multihopping substances). Multihopping is

  18. Antiviral Lead Compounds from Marine Sponges

    PubMed Central

    Sagar, Sunil; Kaur, Mandeep; Minneman, Kenneth P.

    2010-01-01

    Marine sponges are currently one of the richest sources of pharmacologically active compounds found in the marine environment. These bioactive molecules are often secondary metabolites, whose main function is to enable and/or modulate cellular communication and defense. They are usually produced by functional enzyme clusters in sponges and/or their associated symbiotic microorganisms. Natural product lead compounds from sponges have often been found to be promising pharmaceutical agents. Several of them have successfully been approved as antiviral agents for clinical use or have been advanced to the late stages of clinical trials. Most of these drugs are used for the treatment of human immunodeficiency virus (HIV) and herpes simplex virus (HSV). The most important antiviral lead of marine origin reported thus far is nucleoside Ara-A (vidarabine) isolated from sponge Tethya crypta. It inhibits viral DNA polymerase and DNA synthesis of herpes, vaccinica and varicella zoster viruses. However due to the discovery of new types of viruses and emergence of drug resistant strains, it is necessary to develop new antiviral lead compounds continuously. Several sponge derived antiviral lead compounds which are hopedto be developed as future drugs are discussed in this review. Supply problems are usually the major bottleneck to the development of these compounds as drugs during clinical trials. However advances in the field of metagenomics and high throughput microbial cultivation has raised the possibility that these techniques could lead to the cost-effective large scale production of such compounds. Perspectives on biotechnological methods with respect to marine drug development are also discussed. PMID:21116410

  19. Olfaction in Parkin heterozygotes and compound heterozygotes

    PubMed Central

    Alcalay, R.N.; Siderowf, A.; Ottman, R.; Caccappolo, E.; Mejia-Santana, H.; Tang, M.-X.; Rosado, L.; Louis, E.; Ruiz, D.; Waters, C.; Fahn, S.; Cote, L.; Frucht, S.; Ford, B.; Orbe-Reilly, M.; Ross, B.; Verbitsky, M.; Kisselev, S.; Comella, C.; Colcher, A.; Jennings, D.; Nance, M.; Bressman, S.; Scott, W.K.; Tanner, C.; Mickel, S.; Rezak, M.; Novak, K.E.; Friedman, J.H.; Pfeiffer, R.; Marsh, L.; Hiner, B.; Clark, L.N.

    2011-01-01

    Background: While Parkinson disease (PD) is consistently associated with impaired olfaction, one study reported better olfaction among Parkin mutation carriers than noncarriers. Whether olfaction differs between Parkin mutation heterozygotes and carriers of 2 Parkin mutations (compound heterozygotes) is unknown. Objective: To assess the relationship between Parkin genotype and olfaction in PD probands and their unaffected relatives. Methods: We administered the University of Pennsylvania Smell Identification Test (UPSIT) to 44 probands in the Consortium on Risk for Early-Onset Parkinson Disease study with PD onset ≤50 years (10 Parkin mutation heterozygotes, 9 compound heterozygotes, 25 noncarriers) and 80 of their family members (18 heterozygotes, 2 compound heterozygotes, 60 noncarriers). In the probands, linear regression was used to assess the association between UPSIT score (outcome) and Parkin genotype (predictor), adjusting for covariates. Among family members without PD, we compared UPSIT performance in heterozygotes vs noncarriers using generalized estimating equations, adjusting for family membership, age, gender, and smoking. Results: Among probands with PD, compound heterozygotes had higher UPSIT scores (31.9) than heterozygotes (20.1) or noncarriers (19.9) (p < 0.001). These differences persisted after adjustment for age, gender, disease duration, and smoking. Among relatives without PD, UPSIT performance was similar in heterozygotes (32.5) vs noncarriers (32.4), and better than in heterozygotes with PD (p = 0.001). Conclusion: Olfaction is significantly reduced among Parkin mutation heterozygotes with PD but not among their heterozygous relatives without PD. Compound heterozygotes with PD have olfaction within the normal range. Further research is required to assess whether these findings reflect different neuropathology in Parkin mutation heterozygotes and compound heterozygotes. PMID:21205674

  20. Small organometallic compounds as antibacterial agents.

    PubMed

    Patra, Malay; Gasser, Gilles; Metzler-Nolte, Nils

    2012-06-07

    The emergence of bacterial resistance to commercial antibiotics is an issue of global importance. During the last two decades, the number of antibacterial agents that have been discovered and introduced into the market has steadily declined and failed to meet the challenges posed by rapidly increasing resistance of the pathogens against common antibacterial drugs. The development of new classes of compounds to control the virulence of the pathogens is therefore urgently required. This perspective describes the historical development in brief and recent advances on the preparation of small organometallic compounds as new classes of antibacterial agents with potential for clinical development.

  1. Wave dispersion properties of compound finite elements

    NASA Astrophysics Data System (ADS)

    Melvin, Thomas; Thuburn, John

    2017-06-01

    Mixed finite elements use different approximation spaces for different dependent variables. Certain classes of mixed finite elements, called compatible finite elements, have been shown to exhibit a number of desirable properties for a numerical weather prediction model. In two-dimensions the lowest order element of the Raviart-Thomas based mixed element is the finite element equivalent of the widely used C-grid staggering, which is known to possess good wave dispersion properties, at least for quadrilateral grids. It has recently been proposed that building compound elements from a number of triangular Raviart-Thomas sub-elements, such that both the primal and (implied) dual grid are constructed from the same sub-elements, would allow greater flexibility in the use of different advection schemes along with the ability to build arbitrary polygonal elements. Although the wave dispersion properties of the triangular sub-elements are well understood, those of the compound elements are unknown. It would be useful to know how they compare with the non-compound elements and what properties of the triangular sub-grid elements are inherited? Here a numerical dispersion analysis is presented for the linear shallow water equations in two dimensions discretised using the lowest order compound Raviart-Thomas finite elements on regular quadrilateral and hexagonal grids. It is found that, in comparison with the well known C-grid scheme, the compound elements exhibit a more isotropic dispersion relation, with a small over estimation of the frequency for short waves compared with the relatively large underestimation for the C-grid. On a quadrilateral grid the compound elements are found to differ from the non-compound Raviart-Thomas quadrilateral elements even for uniform elements, exhibiting the influence of the underlying sub-elements. This is shown to lead to small improvements in the accuracy of the dispersion relation: the compound quadrilateral element is slightly better for

  2. Basics of Compounding: Clinical Pharmaceutics, Part 1.

    PubMed

    Allen, Loyd V

    2016-01-01

    Pharmaceutics is relevant far beyond the pharmaceutical industry, compounding, and the laboratory. Pharmaceutics can be used to solve many clinical problems in medication therapy. A pharmacists' knowledge of the physicochemical aspects of drugs and drug products should help the patient, physician, and healthcare professionals resolve issues in the increasingly complex world of modern medicine. Pharmacy is unique as it contains a knowledge base significantly different from that of physicians, nurses, and other health-related practitioners. The separation of the science and the practice of pharmacy have prevented the complete utilization of pharmaceutical sciences in the clinical environment far too long. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  3. Broad spectrum antibiotic compounds and use thereof

    DOEpatents

    Koglin, Alexander; Strieker, Matthias

    2016-07-05

    The discovery of a non-ribosomal peptide synthetase (NRPS) gene cluster in the genome of Clostridium thermocellum that produces a secondary metabolite that is assembled outside of the host membrane is described. Also described is the identification of homologous NRPS gene clusters from several additional microorganisms. The secondary metabolites produced by the NRPS gene clusters exhibit broad spectrum antibiotic activity. Thus, antibiotic compounds produced by the NRPS gene clusters, and analogs thereof, their use for inhibiting bacterial growth, and methods of making the antibiotic compounds are described.

  4. Volatile compound formation during argan kernel roasting.

    PubMed

    El Monfalouti, Hanae; Charrouf, Zoubida; Giordano, Manuela; Guillaume, Dominique; Kartah, Badreddine; Harhar, Hicham; Gharby, Saïd; Denhez, Clément; Zeppa, Giuseppe

    2013-01-01

    Virgin edible argan oil is prepared by cold-pressing argan kernels previously roasted at 110 degrees C for up to 25 minutes. The concentration of 40 volatile compounds in virgin edible argan oil was determined as a function of argan kernel roasting time. Most of the volatile compounds begin to be formed after 15 to 25 minutes of roasting. This suggests that a strictly controlled roasting time should allow the modulation of argan oil taste and thus satisfy different types of consumers. This could be of major importance considering the present booming use of edible argan oil.

  5. Basics of sterile compounding: bubble point testing.

    PubMed

    Thoma, Laura

    2014-01-01

    Compounding pharmacies that compound sterile preparations must choose sterile filters that are approved for human use. They may rely on the filter manufacturer's Certificate of Quality to ensure the sterile filter is pyrogen free and has been tested for bacterial retention. The Certificate of Quality from the filter manufacturer also contains other useful information about the filter such as: flow rate and maximum pressure drop, thermal and hydraulic stress, and membrane results of the initial integrity test performed on the filter membrane with water, if a hydrophilic membrane. This article discusses the integrity test, which is often called the water bubble point test.

  6. Inelastic neutron scattering in valence fluctuation compounds

    SciTech Connect

    Jon M Lawrence

    2011-02-15

    The valence fluctuation compounds are rare earth intermetallics where hybridization of the nearly-localized 4f electrons with the conduction electrons leads to incorporation of the 4f's into the itinerant states. This hybridization slows down the conduction electrons and hence gives them a heavy effective mass, justifying application of the term 'heavy Fermion' (HF) to these materials. During the project period, we grew large single crystals of several such compounds and measured their properties using both standard thermodynamic probes and state-of-the-art inelastic neutron scattering. We obtained three main results. For the intermediate valence compounds CePd{sub 3} and YbAl{sub 3}, we showed that the scattering of neutrons by the fluctuations of the 4f magnetic moment does not have the momentum dependence expected for the itinerant heavy mass state; rather, the scattering is more typical of a localized spin fluctuation. We believe that incoherent scattering localizes the excitation. For the heavy Fermion compound Ce(Ni{sub 0.935}Pd{sub 0.065}){sub 2}Ge{sub 2}, which sits at a T = 0 critical point for transformation into an antiferromagnetic (AF) phase, we showed that the scattering from the AF fluctuations does not exhibit any of the divergences that are expected at a phase transition. We speculate that alloy disorder profoundly suppresses the growth of the fluctuating AF regions, leading to short range clusters rather than regions of infinite size. Finally, we explored the applicability of key concepts used to describe the behavior of rare earth heavy Fermions to uranium based HF compounds where the 5f electrons are itinerant as opposed to localized. We found that scaling laws relating the spin fluctuation energy measured in neutron scattering to the low temperature specific heat and susceptibility are valid for the uranium compounds, once corrections are made for AF fluctuations; however, the degeneracy of the high temperature moment is smaller than expected

  7. Organic photosensitive devices using subphthalocyanine compounds

    DOEpatents

    Rand, Barry [Princeton, NJ; Forrest, Stephen R [Ann Arbor, MI; Mutolo, Kristin L [Hollywood, CA; Mayo, Elizabeth [Alhambra, CA; Thompson, Mark E [Anaheim Hills, CA

    2011-07-05

    An organic photosensitive optoelectronic device, having a donor-acceptor heterojunction of a donor-like material and an acceptor-like material and methods of making such devices is provided. At least one of the donor-like material and the acceptor-like material includes a subphthalocyanine, a subporphyrin, and/or a subporphyrazine compound; and/or the device optionally has at least one of a blocking layer or a charge transport layer, where the blocking layer and/or the charge transport layer includes a subphthalocyanine, a subporphyrin, and/or a subporphyrazine compound.

  8. The Structural Chemistry of Energetic Compounds.

    DTIC Science & Technology

    1984-07-06

    Adamantanes with nitro and aza substituents are potentially high density energetic compounds and are a class of compounds for which little structural...C angle is generally accompanied by an increase in C-N bond length. -2- Packing In all of these structures the intermolecular contacts are normal van...efficient packing. Molecular Structure DINGU crystallized in the triclinic P1 space group with a = 6.407, b = 6.991, c = 9.249 A, Q = 103.35, 0 = 101.61 and Y

  9. Dry etching method for compound semiconductors

    SciTech Connect

    Shul, Randy J.; Constantine, Christopher

    1997-01-01

    A dry etching method. According to the present invention, a gaseous plasma comprising, at least in part, boron trichloride, methane, and hydrogen may be used for dry etching of a compound semiconductor material containing layers including aluminum, or indium, or both. Material layers of a compound semiconductor alloy such as AlGaInP or the like may be anisotropically etched for forming electronic devices including field-effect transistors and heterojunction bipolar transistors and for forming photonic devices including vertical-cavity surface-emitting lasers, edge-emitting lasers, and reflectance modulators.

  10. Toxic organic compounds from energy production

    SciTech Connect

    Hites, R.A.

    1990-11-29

    The general theme of this program has been the identification of potentially toxic organic compounds associated with various combustion effluents, following the fates of these compounds in the environment, and improving the analytical methodology for making these measurements. Current work focuses on the fate of combustion-produced polychlorinated dioxins and dibenzofurans. Studies have included: wet and dry deposition; photodegradation; sources of pollutants; liquid chromatography; and measurement of human exposure to environmental contaminants. Of particular was the correlation of lead to dioxins and dibenzofurans. 10 tabs., 33 refs.

  11. Beta cell device using icosahedral boride compounds

    DOEpatents

    Aselage, Terrence L.; Emin, David

    2002-01-01

    A beta cell for converting beta-particle energies into electrical energy having a semiconductor junction that incorporates an icosahedral boride compound selected from B.sub.12 As.sub.2, B.sub.12 P.sub.2, elemental boron having an .alpha.-rhombohedral structure, elemental boron having a .beta.-rhombohedral structure, and boron carbides of the chemical formula B.sub.12-x C.sub.3-x, where 0.15compound self-heals, resisting degradation from radiation damage.

  12. Dry etching method for compound semiconductors

    DOEpatents

    Shul, R.J.; Constantine, C.

    1997-04-29

    A dry etching method is disclosed. According to the present invention, a gaseous plasma comprising, at least in part, boron trichloride, methane, and hydrogen may be used for dry etching of a compound semiconductor material containing layers including aluminum, or indium, or both. Material layers of a compound semiconductor alloy such as AlGaInP or the like may be anisotropically etched for forming electronic devices including field-effect transistors and heterojunction bipolar transistors and for forming photonic devices including vertical-cavity surface-emitting lasers, edge-emitting lasers, and reflectance modulators. 1 fig.

  13. Process for producing phenolic compounds from lignins

    DOEpatents

    Agblevor, Foster A.

    1998-01-01

    A process for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400.degree. C. to about 600.degree. C. at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1-3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof.

  14. Process for producing phenolic compounds from lignins

    DOEpatents

    Agblevor, F.A.

    1998-09-15

    A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

  15. New fluorescent compounds for plastic scintillator applications

    NASA Astrophysics Data System (ADS)

    Bross, A. D.; Pla-Dalmau, A.; Spangler, C. W.

    1993-02-01

    The fluorescent compound 3-hydroxyflavone (3HF) has been modified in order to study the resulting structure-fluorescence relationship. A series of twelve derivatives, bearing different substituents at various positions on the phenyl ring, has been synthesized. Each derivative has been tested as a dopant for plastic scintillator applications by incorporating it in a polystyrene matrix. The absorption, fluorescence, and scintillation light yield characteristics of these compounds in polystyrene have been determined. In addition, emission time distributions have been measured and decay time constants have been calculated from these data.

  16. Metastable Equilibria Among Aqueous Organic Compounds

    NASA Astrophysics Data System (ADS)

    Shock, E.; Shipp, J.; Yang, Z.; Gould, I. R.

    2011-12-01

    Metastable equilibrium states exist when reactions among a subset of compounds in a chemical system are reversible even though other irreversible reactions exist in the same system. The existence of metastable equilibrium among organic compounds was initially detected by comparing ratios of organic acid concentrations reported for oil-field brines (Shock, 1988, Geology 16, 886-890; Shock, 1989, Geology 17, 572-573), and calculating the same ratios for likely oxidation states determined by mineral assemblages and mixtures of hydrocarbons in coexisting petroleum (Shock, 1994, in: The Role of Organic Acids in Geological Processes, Springer). This led to the notion of extending the concept of metastable equilibrium states to explicitly account for petroleum compositions (Helgeson et al., 1993, GCA, 57, 3295-3339), which eventually yielded the concept of hydrolytic disproportionation of kerogens to produce petroleum and CO2(g) (Helgeson et al., 2009, GCA, 73, 594-695). Experimental tests of metastable equilibrium among organic compounds began with the identification of reversible reactions between alkanes and alkenes that are dependent on the H2 fugacity of the experimental system (Seewald, 1994, Nature 370, 285-287). These were followed with a comprehensive series of long-term experiments leading to the hypothesis that reversible reactions include alkanes, alkenes, alcohol, aldehydes, ketones and carboxylic acids (e.g., Seewald, 2001, GCA 65, 1641-1664; 2003, Nature 426, 327-333; McCollom & Seewald, 2003, GCA 67, 3645-3664). We have conducted sets of hydrothermal organic transformation experiments that test the extent to which these reactions are indeed reversible using aromatic and cyclic compounds. Results demonstrate reversibility for reactions among dibenzyl ketone, 1,3-diphenyl-2-propanol, 1,3-diphenylpropene and 1,3-diphenylpropane, as well as among methylcyclohexanes, methylcyclohexenes, methylcyclohexanols, methylcyclohexanones and methylcyclohexadienes. The

  17. Modelling the emplacement of compound lava flows

    NASA Astrophysics Data System (ADS)

    Blake, S.; Bruno, B. C.

    2000-12-01

    The physical variables controlling crust-dominated lava flow have been investigated using laboratory experiments in which molten polyglycol wax was extruded from a point source on to a horizontal plane under cold water. The wax initially spread axisymmetrically and a crust of solid wax grew. Eventually wax broke out from the flow's periphery, sending out a flow lobe which in turn cooled and produced another breakout. The process repeated itself many times, building a 'compound lava'. The time for the first breakout to form correlates well with the theoretically predicted time ( tc) required for cooling to form a crust thick enough for its strength to limit the flow's spreading rate. This time is proportional to the product of effusion rate ( Q) and initial magma viscosity ( μ) and inversely proportional to the square of the crust strength at the flow front. The number of flow units and the apparent fractal dimension of the flow perimeter increase with time normalised by tc. Our model illuminates the physical basis for the observation by Walker [G.P.L. Walker, Bull. Volcanol. 35 (1972) 579-590] that compound lava flows form by slow effusion of low viscosity magma, whereas faster effusion and higher viscosity favour lavas with fewer flow units. Because compound flows require t≫ tc, and given that tc∝ Qμ and the relationship between volume and effusion rate is V= Qt, simple and compound lava flows are predicted to fall in separate fields on a graph of μ against V/ Q2, all else being equal. Compound flows plot at small values of μ and large values of V/ Q2, with the position of the simple/compound boundary defined by field data implying a crust strength of order 10 4 Pa for basaltic to intermediate lavas. Whether a flow remains as a simple flow or matures into a compound flow field depends on the combined effect of viscosity, eruption rate and eruption duration (and hence volume) and these parameters need to be taken in to account when using morphology to infer

  18. Passive Sampling of Nonpolar Compounds in Sediments

    DTIC Science & Technology

    2010-12-02

    9 cm/ s 0.14 cm/ s Rusina et al., ES&T 44:362–367, 2010 Calibration of uptake kinetics Performance reference compounds • not occurring in the water...compounds in sediments 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK...UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Royal Netherlands Institute for Sea Research,PO Box 59,Texel, 1790 AB Netherlands, 8

  19. Photovoltaic applications of Compound Parabolic Concentrator (CPC)

    NASA Technical Reports Server (NTRS)

    Winston, R.

    1975-01-01

    The use of a compound parabolic concentrator as field collector, in conjunction with a primary focusing concentrator for photovoltaic applications is studied. The primary focusing concentrator can be a parabolic reflector, an array of Fresnel mirrors, a Fresnel lens or some other lens. Silicon solar cell grid structures are proposed that increase efficiency with concentration up to 10 suns. A ray tracing program has been developed to determine energy distribution at the exit of a compound parabolic concentrator. Projected total cost of a CPC/solar cell system will be between 4 and 5 times lower than for flat plate silicon cell arrays.

  20. Design of artificial spherical superposition compound eye

    NASA Astrophysics Data System (ADS)

    Cao, Zhaolou; Zhai, Chunjie; Wang, Keyi

    2015-12-01

    In this research, design of artificial spherical superposition compound eye is presented. The imaging system consists of three layers of lens arrays. In each channel, two lenses are designed to control the angular magnification and a field lens is added to improve the image quality and extend the field of view. Aspherical surfaces are introduced to improve the image quality. Ray tracing results demonstrate that the light from the same object point is focused at the same imaging point through different channels. Therefore the system has much higher energy efficiency than conventional spherical apposition compound eye.

  1. Oscillations of a viscous compound drop

    NASA Technical Reports Server (NTRS)

    Lyell, M. J.; Wang, T. G.

    1986-01-01

    The effect of viscosity on normal mode oscillations of a compound drop is determined for a range of values of the viscosity, and the effect of a host medium is considered. The general form of the dispersion relation is derived, and numerical values are obtained for the case of an annular liquid region composed of silicon oil and with the core and host regions taken to be air. Results indicate that the sloshing mode of the compound drop is more damped than the bubble mode.

  2. Process for producing phenolic compounds from lignins

    SciTech Connect

    Agblevor, F.A.

    1998-09-15

    A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

  3. Thin film Heusler compounds manganese nickel gallium

    NASA Astrophysics Data System (ADS)

    Jenkins, Catherine Ann

    Multiferroic Heusler compounds Mn3--xNi xGa (x=0,1,2) have a tetragonal unit cell that can variously be used for magneto-mechanically coupled shape memory ( x=1,2) and spin-mechanical applications (x=0). The first fabrication of fully epitaxial thin films of these and electronically related compounds by sputtering is discussed. Traditional and custom lab characterization of the magnetic and temperature driven multiferroic behavior is augmented by more detailed synchrotron-based high energy photoemission spectroscopic techniques to describe the atomic and electronic structure. Integration of the MnNi2Ga magnetic shape memory compound in microwave patch antennas and active free-standing structures represents a fraction of the available and promising applications for these compounds. Prototype magnetic tunnel junctions are demonstrated by Mn3Ga electrodes with perpendicular anisotropy for spin torque transfer memory structures. The main body of the work concentrates on the definition and exploration of the material series Mn3--xNi xGa (x=0,1,2) and the relevant multiferroic phenomena exhibited as a function of preparation and external stimuli. Engineering results on each x=0,1,2 are presented with device prototypes where relevant. In the appendices the process of the materials design undertaken with the goal of developing new ternary intermetallics with enhanced properties is presented with a full exploration of the road from band structure calculations to device implementation. Cobalt based compounds in single crystal and nanoparticle form are fabricated with an eye to developing the production methods for new cobalt- and iron-based magnetic shape memory compounds for device applications in different forms. Mn2CoSn, a compound isolectronic and with similar atomic ordering to Mn2NiGa is experimentally determined to be a nearly half-metallic ferromagnet in contrast to the metallic ferrimagnetism in the parent compound. High energy photoemission spectroscopy is shown to

  4. Liverworts-potential source of medicinal compounds.

    PubMed

    Asakawa, Y

    2008-01-01

    The bryophytes contain the Marchantiophyta (liverworts), Bryophyta (mosses) and Anthocerotophyta (hornworts) among which the Marchantiophyta contain cellular oil body and they produce a number of terpenoids, aromatic compounds and acetogenins, several of which show interesting biological activity such as allergenic contact dermatitis, insecticide, insect antifeedant, cytotoxic, piscicidal, muscle relaxing, plant growth regulatory, anti-HIV, DNA polymerase beta inhibitory, anti-obesity, neurotrophic, NO production inhibitory, antimicrobial and antifungal activities. The isolation and chemical structures of biologically active compounds and their total synthesis are reviewed.

  5. Bioactive compounds from Iostephane heterophylla (Asteraceae).

    PubMed

    Aguilar, M I; Delgado, G; Hernández, M L; Villarreal, M L

    2001-01-01

    The novel bisabolene sesquiterpenes 3-6, were isolated from Iostephane heterophylla, using bioguided fractionation. The new compounds were determined to be (12R/12S)-12,13-epoxy-xanthorrhizols (3,4) and (12R/12S)-12,13-dihydro-12,13-dihydroxy-xanthorrizols (5,6) and their structures were characterized by analysis of spectroscopic data and by chemical correlation from xanthorrhizol (2). The stereochemistry at C-12 of 5 was deduced using the modified Mosher experiment. Some of the isolated compounds elicited activity against gram positive and gram negative bacteria, levadura and dermatophytes.

  6. Natural compounds for pest and weed control.

    PubMed

    Petroski, Richard J; Stanley, David W

    2009-09-23

    The control of insect pests and invasive weeds has become more species-selective because of activity-guided isolation, structure elucidation, and total synthesis of naturally produced substances with important biological activities. Examples of isolated compounds include insect pheromones, antifeedants, and prostaglandins, as well as growth regulators for plants and insects. Synthetic analogues of natural substances have been prepared to explore the relationships between chemical structure and observed biological activity. Recent scientific advances have resulted from better methods for the chemical synthesis of target compounds and better analytical methods. The capability of analytical instrumentation continues to advance rapidly, enabling new insights.

  7. Dietary derived compounds in cancer chemoprevention

    PubMed Central

    Rzeski, Wojciech

    2012-01-01

    Cancer chemoprevention is defined as the application of natural or synthetic agents to suppress or reverse cancer development and progression. In this field especially diet derived compounds have recently attracted researchers’ attention as potential therapeutics generally exerting low toxicity compared with regular drugs. This review presents a survey of recent findings concerning the most promising dietary chemopreventive agents such as green tea polyphenols (i.e. catechins), long-chain polyunsaturated fatty acids, carotenoids, glucosinolates/isothiocyanates, vitamins (i.e. vitamin D and folate) and minerals (i.e. calcium and selenium). Molecular targets involved in intrinsic pathways affected by these natural compounds are also shortly discussed. PMID:23788916

  8. Use of a Compounding Rule in Inferring the Meaning of Unfamiliar "Kanji" Compound Words.

    ERIC Educational Resources Information Center

    Kuhara-Kojima, Keiko; Hatano, Giyoo

    Two studies investigated whether Japanese college students (as educated adult readers) and fifth-graders (novices after having learned about 640 "kanji") would use, either consciously or not, one of the compounding rules for kanji to understand a compound word. Subjects in the first study were two groups of fifth-graders (49 in each) and…

  9. Compound control of a compound cosine function neural network and PD for manipulators

    NASA Astrophysics Data System (ADS)

    Ye, Jun

    2014-10-01

    In this paper, a compound cosine function neural network controller for manipulators is presented based on the combination of a cosine function and a unipolar sigmoid function. The compound control scheme based on a proportional-differential (PD) feedback control plus the cosine function neural network feedforward control is used for the tracking control of manipulators. The advantages of the compound control are that the system model does not need to be identified beforehand in the manipulator control system and it can achieve better adaptive control in an on-line continuous learning manner. The simulation results for the two-link manipulator show that the proposed compound control has higher tracking accuracy and better robustness than the conventional PD controllers in the position trajectory tracking control for the manipulator. Therefore, the compound cosine function neural network controller provides a novel approach for the manipulator control with uncertain nonlinear problems.

  10. Independent Community Pharmacists' Perspectives on Compounding in Contemporary Pharmacy Education

    PubMed Central

    McPherson, Timothy B.; Fontane, Patrick E.; Berry, Tricia; Chereson, Rasma; Bilger, Rhonda

    2009-01-01

    Objectives To identify compounding practices of independent community pharmacy practitioners in order to make recommendations for the development of curricular objectives for doctor of pharmacy (PharmD) programs. Methods Independent community practitioners were asked about compounding regarding their motivations, common activities, educational exposures, and recommendations for PharmD education. Results Most respondents (69%) accepted compounding as a component of pharmaceutical care and compounded dermatological preparations for local effects, oral solutions, and suspensions at least once a week. Ninety-five percent were exposed to compounding in required pharmacy school courses and most (98%) who identified compounding as a professional service offered in their pharmacy sought additional postgraduate compounding education. Regardless of the extent of compounding emphasis in the practices surveyed, 84% stated that PharmD curricula should include compounding. Conclusions Pharmacy schools should define compounding curricular objectives and develop compounding abilities in a required laboratory course to prepare graduates for pharmaceutical care practice. PMID:19564997

  11. Stable Lithium Argon compounds under high pressure

    PubMed Central

    Li, Xiaofeng; Hermann, Andreas; Peng, Feng; Lv, Jian; Wang, Yanchao; Wang, Hui; Ma, Yanming

    2015-01-01

    High pressure can fundamentally alter the bonding patterns of chemical elements. Its effects include stimulating elements thought to be “inactive” to form unexpectedly stable compounds with unusual chemical and physical properties. Here, using an unbiased structure search method based on CALYPSO methodology and density functional total energy calculations, the phase stabilities and crystal structures of Li−Ar compounds are systematically investigated at high pressure up to 300 GPa. Two unexpected LimArn compounds (LiAr and Li3Ar) are predicted to be stable above 112 GPa and 119 GPa, respectively. A detailed analysis of the electronic structure of LiAr and Li3Ar shows that Ar in these compounds attracts electrons and thus behaves as an oxidizing agent. This is markedly different from the hitherto established chemical reactivity of Ar. Moreover, we predict that the P4/mmm phase of Li3Ar has a superconducting transition temperature of 17.6 K at 120 GPa. PMID:26582083

  12. Sugar Ester Compounds for Arthropod Control

    USDA-ARS?s Scientific Manuscript database

    Sugar esters, also known as acyl sugars or polyol esters, are a class of compounds that are internationally recognized as food additives. They are commonly used in bakery goods, drugs, cosmetics, food packaging plastics, and in other applications because of their surfactant and emulsifying properti...

  13. Microbial degradation of explosives and related compounds.

    PubMed

    Gorontzy, T; Drzyzga, O; Kahl, M W; Bruns-Nagel, D; Breitung, J; von Loew, E; Blotevogel, K H

    1994-01-01

    The pollution of soil and water with explosives and related compounds caused by military activities has been known for a long time, but progress in understanding the environmental fate of such substances has only been made in the last few years. Microbial processes could be used for the remediation of explosives-contaminated soils and waste waters because it has been shown that a variety of different microorganisms are able to metabolize these chemical compounds. In some cases even a complete mineralization has been found, whereas in others only biotransformation reactions took place, producing more or less toxic and/or recalcitrant metabolites. Studies with pure cultures of bacteria and fungi have given detailed insights into the biodegradation pathways of at least some nitroorganic compounds. Additionally, some of the key enzymes have been isolated and purified or studied in crude extracts. This review summarizes information on the biodegradation and biotransformation pathways of several important explosives. This may be useful in developing microbiological methods for a safe and economic clean-up of soil and water contaminated with such compounds. It also shows the necessity of further investigations concerning the microbial metabolism of these substances.

  14. Catalytic Destruction Of Toxic Organic Compounds

    NASA Technical Reports Server (NTRS)

    Voecks, Gerald E.

    1990-01-01

    Proposed process disposes of toxic organic compounds in contaminated soil or carbon beds safely and efficiently. Oxidizes toxic materials without producing such other contaminants as nitrogen oxides. Using air, fuel, catalysts, and steam, system consumes less fuel and energy than decontamination processes currently in use. Similar process regenerates carbon beds used in water-treatment plants.

  15. Visualizing Compound Rotations with Virtual Reality

    ERIC Educational Resources Information Center

    Flanders, Megan; Kavanagh, Richard C.

    2013-01-01

    Mental rotations are among the most difficult of all spatial tasks to perform, and even those with high levels of spatial ability can struggle to visualize the result of compound rotations. This pilot study investigates the use of the virtual reality-based Rotation Tool, created using the Virtual Reality Modeling Language (VRML) together with…

  16. Model compound vulcanization studied by XANES

    NASA Astrophysics Data System (ADS)

    Taweepreda, W.; Nu-Mard, R.; Pattanasiriwisawa, W.; Songsiriritthigul, P.

    2009-11-01

    Squalene has been used as a model compound for the investigation of sulphur crosslink in the vulcanization process. The effects of the accelerator on the crosslink were deduced from the sulfur K-edge absorption spectra. The majority of the crosslinks for the squalene vulcanized with ZDEC or TMTD is likely disulfidic, while that vulcanized with CBS or MBTS is monosulfidic.

  17. Reaction of disubstituted aromatic compounds with styrene

    SciTech Connect

    Grushin, A.I.; Grigor'ev, V.V.; Prokof'ev, K.V.; Kozlova, N.M.

    1988-03-20

    Hydrocarbons of the 1,1-diphenylethane type were obtained by the reaction of styrene with various disubstituted derivatives of benzene in the presence of titanium tetrachloride. It was found that the yield of the desired compound depends on the strength of the electron-donating substituents and on steric factors in the aromatic ring.

  18. Chemical Compound Design Using Nuclear Charge Distributions

    DTIC Science & Technology

    2012-03-01

    Approach in an AM1 Semiempirical Framework. J. Phys. Chem. A 2007, 111 (1), 176-181. [17] von Lilienfeld, O. A.; Lins, R. D.; Rothlisberger , U. Variational...Particle Number Approach for Rational Compound Design. Phys. Rev. Lett. 2005, 95 (15). [18] von Lilienfeld, O. A.; Tavernelli, I.; Rothlisberger , U

  19. Stable surface passivation process for compound semiconductors

    DOEpatents

    Ashby, Carol I. H.

    2001-01-01

    A passivation process for a previously sulfided, selenided or tellurated III-V compound semiconductor surface. The concentration of undesired mid-gap surface states on a compound semiconductor surface is reduced by the formation of a near-monolayer of metal-(sulfur and/or selenium and/or tellurium)-semiconductor that is effective for long term passivation of the underlying semiconductor surface. Starting with the III-V compound semiconductor surface, any oxidation present thereon is substantially removed and the surface is then treated with sulfur, selenium or tellurium to form a near-monolayer of chalcogen-semiconductor of the surface in an oxygen-free atmosphere. This chalcogenated surface is then contacted with a solution of a metal that will form a low solubility chalcogenide to form a near-monolayer of metal-chalcogen-semiconductor. The resulting passivating layer provides long term protection for the underlying surface at or above the level achieved by a freshly chalcogenated compound semiconductor surface in an oxygen free atmosphere.

  20. Azodicarboxylates: synthesis and functionalization of organic compounds

    NASA Astrophysics Data System (ADS)

    Zhirov, A. M.; Aksenov, A. V.

    2014-06-01

    The data on transformations of dialkyl azodicarboxylates and their analogues involving various substrates are generalized. Nucleophilic addition and oxidation, pericyclic reactions and reactions occurring under the Mitsunobu reaction conditions are considered. Ample opportunities for application of these compounds in fine organic synthesis are shown. The bibliography includes 245 references. Dedicated to Academician B A Trofimov on the occasion of his 75th birthday.

  1. Separation of Acids, Bases, and Neutral Compounds

    NASA Astrophysics Data System (ADS)

    Fujita, Megumi; Mah, Helen M.; Sgarbi, Paulo W. M.; Lall, Manjinder S.; Ly, Tai Wei; Browne, Lois M.

    2003-01-01

    Separation of Acids, Bases, and Neutral Compounds requires the following software, which is available for free download from the Internet: Netscape Navigator, version 4.75 or higher, or Microsoft Internet Explorer, version 5.0 or higher; Chime plug-in, version compatible with your OS and browser (available from MDL); and Flash player, version 5 or higher (available from Macromedia).

  2. Arrays of stacked metal coordination compounds

    DOEpatents

    Bulkowski, J.E.

    1986-10-21

    A process is disclosed for preparing novel arrays of metal coordination compounds characterized by arrangement of the metal ions, separated by a linking agent, in stacked order one above the other. The process permits great flexibility in the design of the array. For example, layers of different composition can be added to the array at will. 3 figs.

  3. PRODUCTION OF URANIUM AND THORIUM COMPOUNDS

    DOEpatents

    Arden, T.V.; Burstall, F.H.; Linstead, R.P.; Wells, R.A.

    1955-12-27

    Compounds of Th and U are extracted with an organic solvent in the presence of an adsorbent substance which has greater retentivity for impurities present than for the uranium and/or thorium. The preferred adsorbent material is noted as being cellulose. The uranium and thoriumcontaining substances treated are preferably in the form of dissolved nitrates, and the preferred organic solvent is diethyl ether.

  4. Speciation of antifoulant organotin compounds in water

    SciTech Connect

    Van Nguyen, V.; Posey, I.J.; Eng, G.

    1984-01-01

    The fate of several antifoulant organotin compounds, Ph/sub 3/SnOH, Ph/sub 3/SnCl, and Ph/sub 3/SnOCOCH/sub 3/ in water has been investigated using IR spectroscopy and thin-layer chromatography. Except for the residue resulting from the extract of aqueous Ph/sub 3/SnOCOCH/sub 3/, the IR spectrum of each residue was identical to that of the starting organotin compound. The IR spectrum of the residue obtained from the chloroform extract of aqueous Ph/sub 3/SnOCOCH/sub 3/ which has been shaken for 7 days showed the presence of Ph/sub 3/SnOH as confirmed by the presence of a small doublet around 910 and 897 cm/sup -1/. Also, the pH measurement of each of the aqueous Ph/sub 3/SnX solutions decreased with time. These results are interpreted to suggest that the organotin compounds studied ionize in aqueous media. Thin-layer chromatography results give further support to these findings. The study suggests that the X group in the compounds of the type Ph/sub 3/SnX is labile in polar solvents and that Ph/sub 3/SnOH and/or Ph/sub 3/SnX are the species formed in aqueous solution. 6 references, 1 figure, 2 tables.

  5. Preview Benefit in English Spaced Compounds

    ERIC Educational Resources Information Center

    Cutter, Michael G.; Drieghe, Denis; Liversedge, Simon P.

    2014-01-01

    In an eye tracking experiment during reading we examined whether preview benefit could be observed from 2 words to the right of the currently fixated word if that word was the 2nd constituent of a spaced compound. The boundary paradigm (Rayner, 1975) was used to orthogonally manipulate whether participants saw an identity or nonword preview of the…

  6. Distribution of antiherbivory compounds in Flourensia cernua

    USDA-ARS?s Scientific Manuscript database

    Flourensia cernua is serving as a shrub model to study the influence of terpenes on intake by livestock at this location. Two studies (n=20 plants per study) were conducted to examine within plant distribution of volatile compounds to improve sampling protocol. Leaves from 3 positions (outer canopy,...

  7. Preview Benefit in English Spaced Compounds

    ERIC Educational Resources Information Center

    Cutter, Michael G.; Drieghe, Denis; Liversedge, Simon P.

    2014-01-01

    In an eye tracking experiment during reading we examined whether preview benefit could be observed from 2 words to the right of the currently fixated word if that word was the 2nd constituent of a spaced compound. The boundary paradigm (Rayner, 1975) was used to orthogonally manipulate whether participants saw an identity or nonword preview of the…

  8. Guest Comment: Polyfluorinated Compounds Focus Issue

    EPA Science Inventory

    Over the past decade, a great deal has been learned about the perfluoroalkyl acids (PFAAs), a new class of environmental contaminants that includes the now well-known perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and many other related compounds. These mater...

  9. Visualizing Compound Rotations with Virtual Reality

    ERIC Educational Resources Information Center

    Flanders, Megan; Kavanagh, Richard C.

    2013-01-01

    Mental rotations are among the most difficult of all spatial tasks to perform, and even those with high levels of spatial ability can struggle to visualize the result of compound rotations. This pilot study investigates the use of the virtual reality-based Rotation Tool, created using the Virtual Reality Modeling Language (VRML) together with…

  10. Fluorescent compounds for plastic scintillation applications

    SciTech Connect

    Pla-Dalmau, A.; Bross, A.D.

    1994-04-01

    Several 2-(2{prime}-hydroxyphenyl)benzothiazole, -benzoxazole, and -benzimidazole derivatives have been prepared. Transmittance, fluorescence, light yield, and decay time characteristics of these compounds have been studied in a polystyrene matrix and evaluated for use in plastic scintillation detectors. Radiation damage studies utilizing a {sup 60}C source have also been performed.

  11. Quantum chemical studies of estrogenic compounds

    USDA-ARS?s Scientific Manuscript database

    Quantum chemical methods are potent tools to provide information on the chemical structure and electronic properties of organic molecules. Modern computational chemistry methods have provided a great deal of insight into the binding of estrogenic compounds to estrogenic receptors (ER), an important ...

  12. Chemical Preparation Laboratory for IND Candidate Compounds

    DTIC Science & Technology

    1990-02-08

    CLASSIFICATION lb. RESTRICTIVE MARKINGS Unclassified 2a. SECURITY CLASSIFICATION AUTHORITY 3 . DISTRIBUTION /AVAILABILITY OF REPORT 2b. DECLASSIFICATION... 3 III. Cumulative list of Compounds Delivered to U.S. Army Medical Research and Development (USAMRIID) from January 17, 1989 to...AVS 52) ............................................ 7 2. Selenazole (AVS 253) ............................................... 9 3 . Methyl-l,2,4

  13. Fluorescent compounds for plastic scintillation applications

    NASA Astrophysics Data System (ADS)

    Pla-Dalmau, A.; Bross, A. D.

    1994-04-01

    Several 2-(2'-hydroxyphenyl) -benzothiazole, -benzoxazole, and -benzimidazole derivatives have been prepared. Transmittance, fluorescence, light yield, and decay time characteristics of these compounds have been studied in a polystyrene matrix and evaluated for use in plastic scintillation detectors. Radiation damage studies utilizing a C-60 source have also been performed.

  14. Microscale Group Test for Carbonyl Compounds.

    ERIC Educational Resources Information Center

    Horak, V.; Klein, R. F. X.

    1985-01-01

    Procedures are provided for a test that (1) demonstrates principles of derivatization with 2,4-dinitrophenylhydrazine; (2) is a thin layer chromatography experiment that visually demonstrates separation of colored compounds of different polarities; and (3) introduces microscale experimentation to students in sophomore organic chemistry…

  15. Compound Words and Structure in the Lexicon

    ERIC Educational Resources Information Center

    Fiorentino, Robert; Poeppel, David

    2007-01-01

    The structure of lexical entries and the status of lexical decomposition remain controversial. In the psycholinguistic literature, one aspect of this debate concerns the psychological reality of the morphological complexity difference between compound words ("teacup") and single words ("crescent"). The present study investigates morphological…

  16. Bioremediation of organometallic compounds by bacterial degradation.

    PubMed

    Shah, Jay; Dahanukar, Neelesh

    2012-06-01

    The use of organometallic compounds in the environment is constantly increasing with increased technology and progress in scientific research. But since these compounds are fairly stable, as metallic bonds are stable, they are difficult to degrade or decompose naturally. The aim of this work was to isolate and characterize heterotrophic bacteria that can degrade organometallic compounds (in this case 'ferrocene' and its derivatives). A Gram-negative coccobacillus was isolated from a rusting iron pipe draining into a freshwater lake, which could utilize ferrocene as a sole source of carbon. Phylogenetic analysis based on 16S rDNA sequence suggested that the isolated organism resembled an environmental isolate of Bordetella. Ferrocene degradation was confirmed by plotting the growth curve of the bacterium in a medium with ferrocene as the sole source of carbon. Further confirmation of degradation of ferrocene and its derivatives was done using Gas Chromatography Mass Spectroscopy. Since the bacterium degraded organometallic compounds and released the metal in liquid medium, it could be suggested that this organism can also be used for extracting metal ions from organo-metal containing wastes.

  17. Novel Polyfluorinated Compounds Identified Using High ...

    EPA Pesticide Factsheets

    Concern over persistence, bioaccumulation, and toxicity has led to international regulation and phase-outs of certain perfluorinated compounds and little is known about their replacement products. High resolution mass spectrometry was used to investigate the occurrence and identity of replacement fluorinated compounds in surface water and sediment of the Tennessee River near Decatur, Alabama. Analysis of legacy Per- and polyfluoroalkyl substances (PFASs) revealed a marked increase in concentrations downstream of manufacturing facilities, with the most abundant compounds being perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS), and perfluorooctanoic acid (PFOA) as high as 220 ng L–1, 160 ng L–1, and 120 ng L–1, respectively. A series of nine polyfluorinated carboxylic acids was discovered, each differing by CF2CH2. These acids are likely products or byproducts of a manufacturing process that uses 1,1-difluoroethene, which is registered to a manufacturing facility in the area. Two other predominant compounds discovered have structures consistent with perfluorobutanesulfonate and perfluoroheptanoic acid but have a single hydrogen substituted for a fluorine someplace in their structure. A polyfluoroalkyl sulfate with differing mixes of hydrogen and fluorine substitution was also observed. N-methyl perfluorobutane sulfonamidoacetic acid (MeFBSAA) was observed at high concentrations and several other perfluorobutane sulfonamido substances were pres

  18. Compound Words and Structure in the Lexicon

    ERIC Educational Resources Information Center

    Fiorentino, Robert; Poeppel, David

    2007-01-01

    The structure of lexical entries and the status of lexical decomposition remain controversial. In the psycholinguistic literature, one aspect of this debate concerns the psychological reality of the morphological complexity difference between compound words ("teacup") and single words ("crescent"). The present study investigates morphological…

  19. Fungal endophthalmitis associated with compounded products.

    PubMed

    Mikosz, Christina A; Smith, Rachel M; Kim, Moon; Tyson, Clara; Lee, Ellen H; Adams, Eleanor; Straif-Bourgeois, Susanne; Sowadsky, Rick; Arroyo, Shannon; Grant-Greene, Yoran; Duran, Julie; Vasquez, Yvonne; Robinson, Byron F; Harris, Julie R; Lockhart, Shawn R; Török, Thomas J; Mascola, Laurene; Park, Benjamin J

    2014-02-01

    Fungal endophthalmitis is a rare but serious infection. In March 2012, several cases of probable and laboratory-confirmed fungal endophthalmitis occurring after invasive ocular procedures were reported nationwide. We identified 47 cases in 9 states: 21 patients had been exposed to the intraocular dye Brilliant Blue G (BBG) during retinal surgery, and the other 26 had received an intravitreal injection containing triamcinolone acetonide. Both drugs were produced by Franck's Compounding Lab (Ocala, FL, USA). Fusarium incarnatum-equiseti species complex mold was identified in specimens from BBG-exposed case-patients and an unopened BBG vial. Bipolaris hawaiiensis mold was identified in specimens from triamcinolone-exposed case-patients. Exposure to either product was the only factor associated with case status. Of 40 case-patients for whom data were available, 39 (98%) lost vision. These concurrent outbreaks, associated with 1 compounding pharmacy, resulted in a product recall. Ensuring safety and integrity of compounded medications is critical for preventing further outbreaks associated with compounded products.

  20. Analyzing volatile compounds in dairy products

    USDA-ARS?s Scientific Manuscript database

    Volatile compounds give the first indication of the flavor in a dairy product. Volatiles are isolated from the sample matrix and then analyzed by chromatography, sensory methods, or an electronic nose. Isolation may be performed by solvent extraction or headspace analysis, and gas chromatography i...