London International Youth Science Forum
ERIC Educational Resources Information Center
Auty, Geoff
2010-01-01
In this article, the author discusses the 2010 London International Youth Science Forum (LIYSF) and shares his experience in attending the forum. Unlike the Harry Messel event in Sydney, which takes place every two years, LIYSF is an annual event. Before moving to Imperial College London, LIYSF was held at the Institute of Electrical Engineers and…
Institutional profile: the London Centre for Nanotechnology.
Weston, David; Bontoux, Thierry
2009-12-01
Located in the London neighborhoods of Bloomsbury and South Kensington, the London Centre for Nanotechnology is a UK-based multidisciplinary research center that operates at the forefront of science and technology. It is a joint venture between two of the world's leading institutions, UCL and Imperial College London, uniting their strong capabilities in the disciplines that underpin nanotechnology: engineering, the physical sciences and biomedicine. The London Centre for Nanotechnology has a unique operating model that accesses and focuses the combined skills of the Departments of Chemistry, Physics, Materials, Medicine, Electrical and Electronic Engineering, Mechanical Engineering, Chemical Engineering, Biochemical Engineering and Earth Sciences across the two universities. It aims to provide the nanoscience and nanotechnology required to solve major problems in healthcare, information processing, energy and the environment.
Engineering aspects of geothermal development with emphasis on the Imperial Valley of California
NASA Technical Reports Server (NTRS)
Goldsmith, M.
1978-01-01
This review was prepared in support of a geothermal planning activity of the County of Imperial. Engineering features of potential geothermal development are outlined. Acreage requirements for drilling and powerplants are estimated, as are the costs for wells, fluid transmission pipes, and generating stations. Rough scaling relationships are developed for cost factors as a function of reservoir temperature. Estimates are made for cooling water requirements, and possible sources of cooling water are discussed. Availability and suitability of agricultural wastewater for cooling are emphasized. The utility of geothermal resources for fresh water production in the Imperial Valley is considered.
San Diego Gas and Electric Company Imperial Valley geothermal activities
NASA Technical Reports Server (NTRS)
Hinrichs, T. C.
1974-01-01
San Diego Gas and Electric and its wholly owned subsidiary New Albion Resources Co. have been affiliated with Magma Power Company, Magma Energy Inc. and Chevron Oil Company for the last 2-1/2 years in carrying out geothermal research and development in the private lands of the Imperial Valley. The steps undertaken in the program are reviewed and the sequence that must be considered by companies considering geothermal research and development is emphasized. Activities at the south end of the Salton Sea and in the Heber area of Imperial Valley are leading toward development of demonstration facilities within the near future. The current status of the project is reported.
A consortium of three brings real geothermal power for California's Imperial valley -- at last
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wehlage, E.F.
1983-04-01
Imperial Valley's geothermal history gets a whole new chapter with dedication ceremony for southern California's unusual 10,000 kilowatt power station-SCE in joint corporate venture with Southern Pacific and Union Oil. America's newest and unique electric power generation facility, The Salton Sea Geothermal-Electric Project, was the the site of a formal dedication ceremony while the sleek and stainless jacketed piping and machinery were displayed against a flawlessly brilliant January sky - blue and flecked with a few whisps of high white clouds, while plumes of geothermal steam rose across the desert. The occasion was the January 19, 1983, ceremonial dedication ofmore » the unique U.S.A. power generation facility constructed by an energy consortium under private enterprise, to make and deliver electricity, using geothermal steam released (with special cleaning and treatment) from magma-heated fluids produced at depths of 3,000 to 6,000 feet beneath the floor of the Imperial Valley near Niland and Brawley, California.« less
78 FR 79431 - Combined Notice of Filings #2
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-30
... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 2 Take notice that the Commission received the following electric rate filings: Docket Numbers: ER14-661-000 Applicants: SG2 Imperial Valley LLC Description: SG2 Imperial Valley LLC submits Application for Initial Market-Based Rate Tariff and Granting Certain...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-03-01
The construction and operation of a 14,980,000 gallon per year fuel ethanol from grain refinery in the Imperial Valley of California is proposed. The Imperial Valley Ethanol Refinery (refinery) will use hot geothermal fluid from geothermal resources at the East Mesa area as the source of process energy. In order to evaluate the economic viability of the proposed Project, exhaustive engineering, cost analysis, and financial studies have been undertaken. This report presents the results of feasibility studies undertaken in geothermal resource, engineering, marketing financing, management, environment, and permits and approvals. The conclusion of these studies is that the Project ismore » economically viable. US Alcohol Fuels is proceeding with its plans to construct and operate the Refinery.« less
Wada, Masanori
2014-01-01
The Imperial College of Engineering (ICE or Kobu-Daigakko) in Tokyo, founded in 1873 under the auspices of the Ministry of Public Works, was one of the most prominent modern institutions of engineering education in early Meiji Japan. Previous studies have revealed that the ICE offered large scale practical training programs at enterprises of the Ministry, which sometimes lasted several months, and praised their ideal combination of theory and practice. In reality, it has been difficult to evaluate the quality of education at the ICE mainly because of scarcity of sources. ICE students published a collection of memoirs for alumni members, commemorating the fiftieth-year of the history of the Tokyo Imperial University. Drawing on the previously neglected collection of students' memoires, this paper appraises the education of civil engineering offered by the ICE. The paper also compares this collection with other official records of the college, and confirms it as a reliable source, even though it contains some minor errors. The author particularly uses the memoirs by Ayahiko Ishibashi, one of the first graduates from its civil engineering course, who left sufficient reminiscences on education that he received. This paper, as a result, illustrates that the main practical training for the students of civil engineering was limited to designing process, including surveying. Furthermore, practical training that Ishibashi received at those enterprises often lacked a plan, and its effectiveness was questionable.
Engineering Education in Research-Intensive Universities
ERIC Educational Resources Information Center
Alpay, E.; Jones, M. E.
2012-01-01
The strengths and weaknesses of engineering education in research-intensive institutions are reported and key areas for developmental focus identified. The work is based on a questionnaire and session summaries used during a two-day international conference held at Imperial College London. The findings highlight several common concerns, such as…
ERIC Educational Resources Information Center
D'Arcy, Mitch; Bullough, Florence; Moffat, Chris; Borgomeo, Edoardo; Teh, Micheal; Vilar, Ramon; Weiss, Dominik J.
2014-01-01
Synthesizing and testing bicomposite adsorbents for the removal of environmentally problematic oxy-anions is high on the agenda of research-led universities. Here we present a laboratory module successfully developed at Imperial College London that introduces the advanced undergraduate student in engineering (chemical, civil, earth) and science…
German aircraft accident statistics, 1930
NASA Technical Reports Server (NTRS)
Weitzmann, Ludwig
1932-01-01
The investigation of all serious accidents, involving technical defects in the airplane or engine, is undertaken by the D.V.L. in conjunction with the imperial traffic minister and other interested parties. All accidents not clearly explained in the reports are subsequently cleared up.
Mabuchi, Koichi
2014-07-01
This paper gives an account of Prof. Dr. Kinji Shimizu, the first president of Nagoya Institute of Technology, and his establishment of Nagoya Municipal Science Museum. After graduating from the Electrical Engineering Department of Kyoto Imperial University in 1923, Shimizu was impressed by the German Museum in Munich during his stay there as a student in 1932. It's the first time that he learned the education in cooperation with industries. Just after the Second World War, he became director general of the Ministry of Education. However, new education system given by the United States focused not on developing practical ability but on gaining the basic knowledge, which is contrary to what he expected. Then, he contributed to the establishment of the Japanese Society for Engineering Education, besides working as the president of Nagoya Institute of Technology in the earlier 1950s. His idea was supported by industries for the economic growth. Throughout his career, Prof. Dr. Shimizu was convinced that practical engineering education would benefit Japan, and wanted to introduce cooperative education between universities and industries, along the lines of the same system in Germany and the United States. With this vision he founded Nagoya Municipal Science Museum in cooperation with local industries and local government as his final achievement. The museum was completed in 1964.
Mineral resources of the Cabinet Mountains Wilderness, Lincoln and Sanders Counties, Montana
Lindsey, David A.; Wells, J.D.; Van Loenen, R. E.; Banister, D.P.; Welded, R.D.; Zilka, N.T.; Schmauch, S.W.
1978-01-01
This report describes the differential array, of seismometers recently installed at the Hollister, California, Municipal Airport. Such an array of relatively closely spaced seismometers has already been installed in El Centro and provided useful information for both engineering and seismological applications from the 1979 Imperial Valley earthquake. Differential ground motions, principally due to horizontally propagating surface waves, are important in determining the stresses in such extended structures as large mat foundations for nuclear power stations, dams, bridges and pipelines. Further, analyses of the records of the 1979 Imperial Valley earthquake from the differential array have demonstrated the utility of short-baseline array data in tracking the progress of the rupture wave front of an earthquake.
The Imperial College Thermophysical Properties Data Centre
NASA Astrophysics Data System (ADS)
Angus, S.; Cole, W. A.; Craven, R.; de Reuck, K. M.; Trengove, R. D.; Wakeham, W. A.
1986-07-01
The IUPAC Thermodynamic Tables Project Centre in London has at its disposal considerable expertise on the production and utilization of high-accuracy equations of state which represent the thermodynamic properties of substances. For some years they have been content to propagate this information by the traditional method of book production, but the increasing use of the computer in industry for process design has shown that an additional method was needed. The setting up of the IUPAC Transport Properties Project Centre, also at Imperial College, whose products would also be in demand by industry, afforded the occasion for a new look at the problem. The solution has been to set up the Imperial College Thermophysical Properties Data Centre, which embraces the two IUPAC Project Centres, and for it to establish a link with the existing Physical Properties Data Service of the Institution of Chemical Engineers, thus providing for the dissemination of the available information without involving the Centres in problems such as those of marketing and advertising. This paper outlines the activities of the Centres and discusses the problems in bringing their products to the attention of industry in suitable form.
Engineering education in research-intensive universities
NASA Astrophysics Data System (ADS)
Alpay, E.; Jones, M. E.
2012-12-01
The strengths and weaknesses of engineering education in research-intensive institutions are reported and key areas for developmental focus identified. The work is based on a questionnaire and session summaries used during a two-day international conference held at Imperial College London. The findings highlight several common concerns, such as the need to improve faculty motivation towards teaching, broaden the workplace skills of students, widen employer engagement in teaching and raise the relevance and value of scholarly activity in the discipline of engineering education. Examples of good practice used to address such issues are reported.
Manual Training Schools in America.
ERIC Educational Resources Information Center
Schenck, John P.
John Runkle, president of the Massachusetts Institute of Technology (MIT), viewed the Moscow Imperial Technical School exhibit at the Philadelphia Centennial Exposition of 1876 and saw the Russian method of manual training as the answer to the dilemma of combining theory and practice in engineering instruction. On August 17, 1876, shops in which…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1977-02-01
The Electric Power Research Institute (EPRI) has been studying the feasibility of a Low Salinity Hydrothermal Demonstration Plant as part of its Geothermal Energy Program. The Heber area of the Imperial Valley was selected as one of the candidate geothermal reservoirs. Documentation of the environmental conditions presently existing in the Heber area is required for assessment of environmental impacts of future development. An environmental baseline data acquisition program to compile available data on the environment of the Heber area is reported. The program included a review of pertinent existing literature, interviews with academic, governmental and private entities, combined with fieldmore » investigations and meteorological monitoring to collect primary data. Results of the data acquisition program are compiled in terms of three elements: the physical, the biological and socioeconomic settings.« less
ERIC Educational Resources Information Center
Hulme, Julie; Taylor, Jacqui; Davies, Mark N. O.; Banister, Peter
2012-01-01
The Higher Education Academy (HEA) is committed to enhancing the quality of learning and teaching for all university students in the UK, and the inaugural conference for the Science, Technology, Engineering and Mathematics (STEM) subjects, held in April 2012 at Imperial College, London, aimed to showcase research and evidence-based educational…
NAKAHARA JUNZO Who Was A Leading Japanese Practical Engineer of The Meiji Era Born in Kumamoto
NASA Astrophysics Data System (ADS)
Iwai, Zenta
Nakahara Junzo is one of the leading engineers in the Meiji era who contributed the introduction and the construction of western style higher engineering education system after the Meiji restoration. He was born at Yamaga, Kumamoto Prefecture, in 1856. He learned at Kumamoto Yo-Gakko from 1871 to 1874. Then he entered Kohbu Dai-Gakko, one of the forerunners of the engineering departments of the University of Tokyo, in 1876 and graduated from this school in 1882. He served as the first principal of the Kumamoto Koto Kogyou Gakko, the first dean of the Faculty of Engineering, Kyushu Imperial University and the 7th president of the Japan Society of Mechanical Engineers, respectively. In this report, it is summarized and evaluated about his contributions concerning the progress of the Japanese higher engineering education and practical researches done by him in the field of mechanical engineering.
Currently available medical engineering degrees in the UK. Part 1: Undergraduate degrees.
Joyce, T
2009-05-01
This paper reviews mechanical-engineering-based medical engineering degrees which are currently provided at undergraduate level in the UK. At present there are 14 undergraduate degree programmes in medical engineering, offered by the University of Bath, University of Birmingham, University of Bradford, Cardiff University, University of Hull, Imperial College London, University of Leeds, University of Nottingham, University of Oxford, Queen Mary University of London, University of Sheffield, University of Southampton, University of Surrey, and Swansea University. All these undergraduate courses are delivered on a full-time basis, both 3 year BEng and 4 year MEng degrees. Half of the 14 degree courses share a core first 2 years with a mechanical engineering stream. The other seven programmes include medical engineering modules earlier in their degrees. Within the courses, a very wide range of medical-engineering-related modules are offered, although more common modules include biomaterials, biomechanics, and anatomy and physiology.
Powell, Charles L.
2008-01-01
Forty-four invertebrate taxa, including one coral, 40 mollusks (30 bivalves and 10 gastropods), and three echinoids are recognized from a thin marine interval of the Imperial Formation near Travertine Point, Imperial County, California. The Travertine Point outcrop lies about midway between exposures of the Imperial Formation around Palm Springs, Riverside County, and exposures centered at Coyote Mountain in Imperial and San Diego Counties. Based on faunal comparisons, the Travertine Point outcrop corresponds to the Imperial and San Diego outcrops. The Travertine Point fauna is inferred to have lived in subtropical to tropical waters at littoral to inner sublittorial (<50 m) water depths. Coral and molluscan species from the Travertine Point outcrop indicate a Pliocene age. Two extant bivalve mollusks present have not previously been reported as fossils Anadara reinharti and forms questionably referred to Dosinia semiobliterata.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-08
... Implementation Plan, Imperial County Air Pollution Control District; Final Rule #0;#0;Federal Register / Vol. 75... Implementation Plan, Imperial County Air Pollution Control District AGENCY: Environmental Protection Agency (EPA... the Imperial County Air Pollution Control District (ICAPCD or the District) portion of the California...
Heat flow and geothermal potential of the East Mesa KGRA, Imperial Valley, California
NASA Technical Reports Server (NTRS)
Swanberg, C. A.
1974-01-01
The East Mesa KGRA (Known Geothermal Resource Area) is located in the southeast part of the Imperial Valley, California, and is roughly 150 kilometers square in areal extent. A new heat flow technique which utilizes temperature gradient measurements across best clays is presented and shown to be as accurate as conventional methods for the present study area. Utilizing the best clay gradient technique, over 70 heat flow determinations have been completed within and around the East Mesa KGRA. Background heat flow values range from 1.4 to 2.4 hfu (1 hfu = .000001 cal. per square centimeter-second) and are typical of those throughout the Basin and Range province. Heat flow values for the northwest lobe of the KGRA (Mesa anomaly) are as high as 7.9 hfu, with the highest values located near gravity and seismic noise maxima and electrical resistivity minima. An excellent correlation exists between heat flow contours and faults defined by remote sensing and microearthquake monitoring.
ERIC Educational Resources Information Center
New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.
Designed to assist teachers and supervisors in the implementation of the global history course, this bulletin presents learning activities which include the rationale, performance objectives, and teaching strategies related to Theme VI entitled, "Nineteenth Century Imperialism Affected the Imperial Powers and the Colonies." This theme has seven…
ERIC Educational Resources Information Center
New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.
The worksheets contained in this bulletin are designed for use in conjunction with the teaching strategies for Theme VI entitled, "Nineteenth Century Imperialism Affected the Imperial Powers and the Colonies." The worksheets correspond to specific teaching strategies with accompanying questions on the appropriate strategy page. Included are…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-13
..., LVRAB109AA01] Notice of Availability of the Record of Decision for the Imperial Valley Solar Project and...) application CACA-47740 for the proposed SES Solar Two Project. After merging with Tessera Solar, the applicant changed its name to Imperial Valley Solar, LLC, and changed the name of the project to the Imperial Valley...
NASA Technical Reports Server (NTRS)
Larsen, Shawn; Reilinger, Robert
1990-01-01
Releveling and other geophysical data for the Imperial Valley of southern California suggest the northern section of the Imperial-Brawley fault system, which includes the Mesquite Basin and Brawley Seismic Zone, is much younger than the 4 to 5 million year age of the valley itself. A minimum age of 3000 years is calculated for the northern segment of the Imperial fault from correlations between surface topography and geodetically observed seismic/interseismic vertical movements. Calculations of a maximum age of 80,000 years is based upon displacements in the crystalline basement along the Imperial fault, inferred from seismic refraction surveys. This young age supports recent interpretations of heat flow measurements, which also suggest that the current patterns of seismicity and faults in the Imperial Valley are not long lived. The current fault geometry and basement morphology suggest northwestward growth of the Imperial fault and migration of the Brawley Seismic Zone. It is suggested that this migration is a manifestation of the propagation of the Gulf of California rift system into the North American continent.
2014-04-01
piezoelectric material is reported to potentially produce gains up to a factor of 8 over commercially available, high-performance PZT materials...Narrow-band signal (70-200 cycles) Concentrates energy in desired propagation mode and improves response of PZT transducer. High output/sensitivity PZT ...of Mechanical Engineering, Imperial College. Christoph, P., Q-Y Kim, J. Qu, and L. J. Jacobs. 2009. Evaluation of fatigue damage using non-linear
NASA Astrophysics Data System (ADS)
Abu El-Enen, Mahrous M.; Lorenz, Joachim; Ali, Kamal A.; von Seckendorff, Volker; Okrusch, Martin; Schüssler, Ulrich; Brätz, Helene; Schmitt, Ralf-Thomas
2018-03-01
Imperial Porphyry, a famous dimension stone of spectacular purple color, was quarried in the Mons Porphyrites area north of Jabal Dokhan in the Eastern Desert of Egypt, from the beginning of the first until the middle of the fifth century AD. During this period, the valuable material was processed as decorative stone and was used for objects of art, reserved exclusively for the Imperial court of the Roman Empire. Later on, only antique spoils of smaller or bigger size have been re-used for these purposes. The Imperial Porphyry is a porphyritic rock of trachyandesitic to dacitic composition that occurs in the uppermost levels of shallow subvolcanic sill-like intrusions, forming a member of the Dokhan Volcanic Suite. Its purple color is mainly due to dispersed flakes of hematite, resulting from hydrothermal alteration of a dark green Common Porphyry of similar composition, underlying the Imperial Porphyry. Both, the Common Porphyry and the purple Imperial Porphyry', are extensively exposed in the Roman quarries. Contacts between Common and Imperial Porphyry are irregular and gradational. In both rock types, intrusive breccias are frequent, indicating a complex intrusion history. U-Th-Pb zircon geochronology on two samples of Imperial Porphyry and one sample of the Common Porphyry yielded an age range of 609-600 Ma, thus confirming earlier results of radiometric dating. Geochemical evidence indicates that both the Imperial and the Common Porphyry are of medium- to high-K calc-alkaline affinity. The magmas have formed by partial melting of a subduction-modified upper mantle. The subsequent intrusion took place within a highly extended terrane (HET).
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-06
... the California State Implementation Plan, Imperial County Air Pollution Control District, Kern County Air Pollution Control District, and Ventura County Air Pollution Control District AGENCY... the Imperial County Air Pollution Control District (ICAPCD), Kern County Air Pollution Control...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-19
... the California State Implementation Plan; Imperial County Air Pollution Control District AGENCY... the Imperial County Air Pollution Control District (ICAPCD) portion of the California State... of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control, Intergovernmental...
Rahnama, Majid; Tuszynski, Jack A; Bókkon, István; Cifra, Michal; Sardar, Peyman; Salari, Vahid
2011-03-01
In this paper we argue that, in addition to electrical and chemical signals propagating in the neurons of the brain, signal propagation takes place in the form of biophoton production. This statement is supported by recent experimental confirmation of photon guiding properties of a single neuron. We have investigated the interaction of mitochondrial biophotons with microtubules from a quantum mechanical point of view. Our theoretical analysis indicates that the interaction of biophotons and microtubules causes transitions/fluctuations of microtubules between coherent and incoherent states. A significant relationship between the fluctuation function of microtubules and alpha-EEG diagrams is elaborated on in this paper. We argue that the role of biophotons in the brain merits special attention. © Imperial College Press
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-07
... Determination To Stay Sanctions, Imperial County Air Pollution Control District AGENCY: Environmental Protection... imposition of sanctions based on a proposed approval of revisions to the Imperial County Air Pollution... Part 52 Environmental protection, Air pollution control, Incorporation by reference, Intergovernmental...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-07
... the California State Implementation Plan, Imperial County Air Pollution Control District AGENCY... the Imperial County Air Pollution Control District (ICAPCD) portion of the California State...)(2)). List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-06
... the California State Implementation Plan, Imperial County Air Pollution Control District, Kern County Air Pollution Control District, and Ventura County Air Pollution Control District AGENCY... approve revisions to the Imperial County Air Pollution Control District (ICAPCD), Kern County Air...
The Coast Artillery Journal. Volume 81, Number 1, January-February 1938
1938-02-01
officers (at Cow Pens, Bemis Heights, Bunker Hill) be- GENERAL PHILIP KEARNY. By Thomas Kearnv . New York: G. P. Putnam’s Sons, 1937. 4~ pages; 19... Holstein , :: ~~~~:f;I~~1~i~~esSystems. D that shadowy and sinister figure in the Foreign Office who ft Starting Motors, Generators, and Lighting Systems...pulled the strings and made the incompetent imperial .. Theory of Internal CombustionEngines. :: chancellors dance. But Wilhelm knew of Holstein
Currently available medical engineering degrees in the UK. Part 2: Postgraduate degrees.
Joyce, T
2009-05-01
This paper considers taught medical engineering MSc degrees, based on mechanical engineering, which are provided in the UK. Currently there are 19 institutions which provide such postgraduate degree programmes. These are the University of Aberdeen, University of Bath, University of Bradford, Brunel University, University of Dundee, University of Hull, Imperial College London, Keele University, King's College London, University of Leeds, University of Liverpool, University of Nottingham, University of Oxford, Queen Mary University of London, University of Southampton, University of Strathclyde, University of Surrey, University of Ulster, and University of Warwick. While most courses are delivered on a 1 year full-time basis, other delivery modes are also available. Relatively few modules are offered as distance learning or short courses. A wide range of modules are offered by the various universities for the different taught MSc degrees. Common modules include biomaterials and biomechanics. The medical-engineering-related modules offered by a number of universities are also made available to students on allied MSc programmes and undergraduate degrees in medical engineering.
NASA Astrophysics Data System (ADS)
Mitcheson, Paul; Beeby, Steve
2013-12-01
It is a pleasure to welcome you to The Royal Society in London and the 13th International Conference on Micro- and Nano-Technology for Power Generation and Energy Conversion Applications, or PowerMEMS 2013. The objective of PowerMEMS 2013 is to catalyse innovation in miniature, micro- and nano-scale technologies for power generation and energy conversion. The conference aims to stimulate the exchange of insights and information, and the development of new ideas in the Power MEMS/NEMS field as well as at the meso-scale. It will allow the attendees to interact and network within our multidisciplinary community that includes professionals from many branches of science and engineering. The technical program is led by four invited speakers covering inductive power transfer, chip scale power sources, thermal energy harvesting and implantable biofuel cells. We received 177 abstracts and following a careful reviewing process by the Technical Program Committee a total of 137 papers were selected for presentation. These have been organised into 16 oral sessions in two parallel streams and two poster sessions that have been augmented by 10 late news papers. The oral and regular poster papers are, for the first time, being published by the Institute of Physics. We have made every effort to make PowerMEMS 2013 the busiest yet and have included for the first time the PowerMEMS School. This two-day school held at Imperial College London covered a wide range of power-MEMS topics including technologies for power generation, power transmission, energy storage, power electronics interfaces and metrology. Registrations for the School exceeded our expectations and it was full by early November. We hope this, and other activities such as the Discussion Panel and the inclusion of late news papers, will make PowerMEMS 2013 a memorable success. We have also reached out to new communities, such as those working in wireless power transfer and RF harvesting to broaden the technology remit of our conference. The social program is an important aspect of any conference and the PowerMEMS 2013 banquet will be held in the Science Museum. This provides a fantastic opportunity to network whilst viewing some of the fundamental engineering innovations that have ultimately bought us all here today. There is a long list of individuals we would like to thank for their support in organising PowerMEMS 2013. Once again the TPC, chaired by Eric Yeatman and Douglas Paul, have given us their valuable time and effort in reviewing abstracts. The PowerMEMS School chairs Einar Halvorsen and Shad Roundy and the expert speakers made the School possible. The local organising committee, led by Alwyn Elliott, have provided us with invaluable assistance in making PowerMEMS 2013 happen. The financial support from Imperial College London, the University of Southampton and conference sponsors has also been gratefully appreciated. Finally, we would like to thank you all for attending and helping in making PowerMEMS 2013 a success. We wish you a productive and enjoyable conference and a wonderful stay in London. Paul Mitcheson and Steve Beeby CONFERENCE OFFICIALS Conference Co-Chairs Stephen Beeby, University of Southampton, UK Paul Mitcheson, Imperial College London, UK Technical Program Committee Co-Chairs Douglas Paul, University of Glasgow, UK Eric Yeatman, Imperial College London, UK PowerMEMS School Co Chairs Einar Halvorsen, Vestfold University College, Norway Shad Roundy, University of Utah, USA Local Organising Committee Chair Alwyn Elliott, Imperial College London, UK International Steering Committee Mark Allen, Georgia Institute of Technology, USA Steve Beeby, University of Southampton, UK Young-Ho Cho, KAIST, South Korea Alan Epstein, Massachusetts Institute of Technology, USA Masayoshi Esashi, Tohoku University, Japan Luc Fréchette, Université de Sherbrooke, Canada Reza Ghodssi, University of Maryland, USA Hiroki Kuwano, Tohoku University, Japan Jeff Lang, Massachusetts Institute of Technology, USA Ryutaro Maeda, National Institute of Advanced Industrial Science and Technology, Japan Kazusuke Maenaka, University of Hyogo, Japan Paul Mitcheson, Imperial College London, UK Albert Pisano, UC San Diego, USA Susumu Sugiyama, Ritsumeikan University, Japan Yuju Suzuki, University of Tokyo, Japan Shuji Tanaka, Tohoku University, Japan Miwako Waga, Susano Berkeley LLC, Japan Peter Woias, University Freiburg IMTEK, Germany Technical Program Committee David Arnold, University of Florida, USA Seiji Aoyagi, Kansai University, Japan Skandar Basrour, Tima Laboratory, France Philippe Basset, Université Paris Est/ESIEE Paris, France Mustafa Ilker Beyaz, Antalya International University, Turkey Danick Briand, École Polytechnique Fédérale de Lausanne (EPFL), Switzerland Steve Burrow, University of Bristol, UK Luc Fréchette, University of Sherbrooke, Canada Takayuki Fujita, University of Hyogo, Japan Florian Herrault, Georgia Institute of Technology, USA Andrew Holmes, Imperial College London, UK Hanseup Kim, University of Utah, USA Seong-Hyok Kim, Georgia Institute of Technology, USA Sejin Kwon, KAIST, South Korea Carol Livermore, Northeastern University, USA Matthew McCarthy, Drexel University, USA Jae Park, Kwangwoon University, South Korea Paul Ronney, University of Southern California, USA Nico de Rooij, École Polytechnique Fédérale de Lausanne (EPFL), Switzerland Yuji Suzuki, University of Tokyo, Japan Shuji Tanaka, Tohoku University, Japan Luis Velasque-Garcia, Massachusetts Institute of Technology, USA Huib Visser, Imec Netherlands Ruud Vullers, Imec, Netherlands C Mike Waits, US Army Research Laboratory, USA Xiaohong Wang, Tsinghua University, China David Yates, Imperial College London, UK Local Organising Committee Dibin Zhu, University of Southampton, UK Alex Weddell, University of Southampton, UK Tzern Toh, Imperial College London, UK Michail Kiziroglou, Imperial College London, UK Christopher Kwan, Imperial College London, UK
The Contemporary Reality of Canadian Imperialism: Settler Colonialism and the Hybrid Colonial State
ERIC Educational Resources Information Center
Barker, Adam J.
2009-01-01
The author's fundamental contention is this: Canadian society remains driven by the logic of imperialism and engages in concerted colonial action against Indigenous peoples whose claims to land and self-determination continue to undermine the legitimacy of Canadian authority and hegemony. The imperial ambitions of the Canadian state and its…
Uranium Reserves on Planet Zeus: A Unit on Imperialism.
ERIC Educational Resources Information Center
Price, Mary A.
1988-01-01
Designed as a follow up unit on the study of imperialism, this lesson requires students to use their knowledge of imperialism to solve a problem that could arise in the future space frontier. Organized for small group participation, the lesson focuses on international cooperation. Includes all required resources and suggests appropriate additional…
The Imperial Curriculum: Racial Images and Education in the British Colonial Experience.
ERIC Educational Resources Information Center
Mangan, J. A., Ed.
This book presents a comparative analysis of racial attitudes within formal schooling of both Britain and its former dominions and colonies. It provides essays that examine racism, education, and imperialism, and focuses on the function of education, curriculum, and textbooks in shaping imperial images of dominance and deference. The following…
NASA Astrophysics Data System (ADS)
Forster, C. B.; Gonzalez, T.; Peach, J.; Kjelland, M.; Collins, K.; Grant, W. E.
2006-12-01
Borderland communities in the Imperial-Mexicali Valleys (IMVs) of California (U.S.A.) and Mexicali (Mexico) are experiencing socioeconomic and environmental changes driven by policy makers and environmental conditions both within and outside the IMVs. The Colorado River Quantification Settlement Agreement (QSA) of 2003 will transfer 30 million acre-feet of Colorado River water from Imperial Valley (IV) agricultural users to Southern California urban users over a 75-year period. Because the water level of the Salton Sea is supported by agricultural runoff, reduced water flows to the sea raise concerns that: 1) air quality will be degraded as dust is generated by the drying Sea-bed, and 2) declining fish populations due to increasing salinity will no longer support birds migrating along a key avian flyway. Rapid population growth in the Mexican border-city of Mexicali, combined with new power plants and plans for water reuse, raises concerns that: 1) the quantity and quality of water supplied to the Salton Sea will decline, and 2) increased vehicle use and electrical power generation will lead to declining air quality in the binational air basin. Each concern may be affected by climate change. As environmental factors change, so too may the agricultural economy of the Imperial Valley that, in turn, depends on the availability of both water and manual labor. The economy of Mexicali is dominated by the maquiladora (manufacturing) industry that depends upon the availability of power, labor and water. A system dynamics model, with annual time step, simulates this complex binational system. The model was developed by an academic team with input from local experts/decision-makers from both Mexico and the US. We are preparing to engage community stakeholders and decision-makers in exploring the model. Insights gained from model results yield better understanding of the consequences of alternative future scenarios that include: QSA water transfers and land fallowing plans, socioeconomic change, climate-related variations in future Colorado River flows, plans for Salton Sea restoration, and changing wastewater discharge from Mexicali.
USDA-ARS?s Scientific Manuscript database
Cucurbit leaf crumple virus (CuLCrV) is an emergent and potentially economically important bipartite begomovirus first identified in volunteer watermelon plants in the Imperial Valley of southern California in 1998. Field surveys indicated that CuLCrV has become established in the Imperial Valley; a...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-28
... mirrors concentrate solar energy onto the solar receiver of the PCU. The project also includes an..., LVRAB109AA01] Notice of Availability of the Final Environmental Impact Statement for the Imperial Valley Solar... Management Plan (RMP) Amendment/Final Environmental Impact Statement (EIS) for the Imperial Valley Solar, LLC...
Imperial Valley College 2+2+2 Project Handbook.
ERIC Educational Resources Information Center
Marquez, Ralph
This handbook of the Imperial Valley College (IVC) 2+2+2 Project provides an overview of the development of an articulated education program for business and law enforcement careers, involving six local high schools and San Diego State University, Imperial Valley Campus. Following a brief introduction to the 2+2+2 project in section I, section II…
Changing Patterns of Cultural Imperialism in a Developing Country.
ERIC Educational Resources Information Center
Everitt, John
Using Belize, Central America, as an example, this paper illustrates some of the changing patterns of cultural imperialism that can presently be viewed in the emerging nations of the world. Cultural imperialism is defined as the process whereby the culture of a weaker nation is dominated by that of a stronger nation. In September 1981, Belize,…
Hypocenter for the 1979 Imperial Valley Earthquake
Archuleta, Ralph J.
1982-01-01
Using P-and S-wave arrival times with the laterally varying P-wave velocity structure derived from analysis of a refraction survey of the Imperial Valley, a hypocenter is ascertained for the October 15, 1979, Imperial Valley earthquake: Latitude 32° 39.50′N, Longitude 115° 19.80′W, Depth 8.0 km, Time 23:16:54.40 GMT.
ERIC Educational Resources Information Center
Bass, Jeff D.
1998-01-01
Examines three recent popularized accounts of emerging lethal viral strains within the context of a late 19th-century rationale for imperialism: the ideologeme of scenic contamination, which justifies imperialism as a defensive measure. Notes how the three texts present ideologically charged images of the Third World and its relationship to the…
[The history of smallpox vaccination in the Imperial Moscow foster house].
Sher, S A
2011-01-01
The article deals with the history of vaccination against natural smallpox which is directly connected to the Imperial Moscow foster house which became one of smallpox vaccination centers in Russia of XIX century. In 1801, when variolations were substituted by more safe cowpox vaccinations, in Russia the first vaccination using the method of Jenner was made exactly in in the Imperial Moscow foster house. From 1805, the smallpox vaccination received the status of force of law, the Imperial Moscow foster house began to produce and to distribute the smallpox vaccine all over the country and apply the smallpox vaccination not only to its foster children but to all turned to and, besides that, to train the smallpox vaccination. In 1857, the Imperial Moscow foster house became the first establishment in Russia where the revaccination was applied. In 1980, the WHO proclaimed that the implementation of the global program of smallpox irradiation resulted in the natural smallpox elimination on Earth. The smallpox became the first communicable disease defeated due to mass vaccination. One third of Earth population was vaccinated by the Soviet vaccine, which originated mainly because of the activities of physicians of the Imperial Moscow foster house.
Earth Observations taken by the Expedition 18 Crew
2009-01-31
ISS018-E-024949 (31 Jan. 2009) --- The All-American Canal, the largest irrigation canal in the world and a key landmark along the California-Mexico border, is featured in this image photographed by an Expedition 18 crewmember on the International Space Station. This image captures about 15 kilometers of the important infrastructure corridor just west of Yuma, AZ. The prominent dark line crossing the image is the Canal which is crossed, in this view, by Interstate Highway 8. The canal carries 740.6 cubic meters (26,155 cubic feet) of water per second from the Colorado River westward to support the intensive agriculture of California?s Imperial Valley to the northwest, and to nine cities including San Diego, CA. The canal system is the Imperial Valley?s only source of water, and allows irrigation of more than 2,000 square kilometers (500,000 acres) of agricultural fields. The Coachella Canal, one of four main branch canals, leads water north to Imperial Valley. This section of the canal requires constant maintenance. Approximately 68,000 acre-feet of water per year are lost by seepage from the All-American Canal - especially where the canal crosses the great Algodones Dune Field, a portion of which is visible extending from top to bottom in the center of the image. Additionally, dune sand is constantly blown to the southeast, and into the canal. As part of California?s Colorado River Water Use Plan, 37 kilometers (23 miles) of the canal is being lined to prevent water loss by seepage. A recently opened sector parallels the old canal (right) and new lined sectors are under construction (bright lines, center). Engineers have sited new sections of the canal to avoid the worst areas of dune-sand invasion, so that the new configuration will be significantly cheaper to maintain and operate. A new road crosses the dunes and marks the US?Mexico border as part of border fence construction efforts. The margin of the Colorado River floodplain in Mexico is just visible two kilometers south of the border (lower left corner). This floodplain is Mexico?s equivalent of the Imperial Valley in terms of its enormous irrigated agricultural production.
46 CFR 188.25-1 - Electrical engineering details.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Electrical engineering details. 188.25-1 Section 188.25... GENERAL PROVISIONS General Electrical Engineering Requirements § 188.25-1 Electrical engineering details. (a) The electrical engineering details shall be in accordance with subchapter J (Electrical...
46 CFR 188.25-1 - Electrical engineering details.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Electrical engineering details. 188.25-1 Section 188.25... GENERAL PROVISIONS General Electrical Engineering Requirements § 188.25-1 Electrical engineering details. (a) The electrical engineering details shall be in accordance with subchapter J (Electrical...
46 CFR 188.25-1 - Electrical engineering details.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Electrical engineering details. 188.25-1 Section 188.25... GENERAL PROVISIONS General Electrical Engineering Requirements § 188.25-1 Electrical engineering details. (a) The electrical engineering details shall be in accordance with subchapter J (Electrical...
46 CFR 188.25-1 - Electrical engineering details.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Electrical engineering details. 188.25-1 Section 188.25... GENERAL PROVISIONS General Electrical Engineering Requirements § 188.25-1 Electrical engineering details. (a) The electrical engineering details shall be in accordance with subchapter J (Electrical...
46 CFR 188.25-1 - Electrical engineering details.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Electrical engineering details. 188.25-1 Section 188.25... GENERAL PROVISIONS General Electrical Engineering Requirements § 188.25-1 Electrical engineering details. (a) The electrical engineering details shall be in accordance with subchapter J (Electrical...
Acquisition of 3d Information for Vanished Structure by Using Only AN Ancient Picture
NASA Astrophysics Data System (ADS)
Kunii, Y.; Sakamoto, R.
2016-06-01
In order to acquire 3D information for reconstruction of vanished historical structure, grasp of 3D shape of such structure was attempted by using an ancient picture. Generally, 3D information of a structure is acquired by photogrammetric theory which requires two or more pictures. This paper clarifies that the geometrical information of the structure was obtained only from an ancient picture, and 3D information was acquired. This kind of method was applied for an ancient picture of the Old Imperial Theatre. The Old Imperial Theatre in the picture is constituted by two-point perspective. Therefore, estimated value of focal length of camera, length of camera to the Old Imperial Theatre and some parameters were calculated by estimation of field angle, using body height as an index of length and some geometrical information. Consequently, 3D coordinate of 120 measurement points on the surface of the Old Imperial Theatre were calculated respectively, and 3DCG modeling of the Old Imperial Theatre was realized.
Leppert, Lynda L; Layman, Seth; Bragin, Evgeny A; Katzner, Todd
2004-04-01
Prevalence of hemoparasites has been investigated in many avian species throughout Europe and North America. Basic hematologic surveys are the first step toward evaluating whether host-parasite prevalences observed in North America and Europe occur elsewhere in the world. We collected blood smears from 94 nestling imperial eagles (Aquila heliaca), five nestling steppe eagles (Aquila nipalensis), and 14 nestling white-tailed sea eagles (Haliaeetus albicilla) at Naurzum Zapovednik (Naurzum National Nature Reserve) in Kazakhstan during the summers of 1999 and 2000. In 1999, six of 29 imperial eagles were infected with Lencocytozoon toddi. Five of 65 imperial eagles and one of 14 white-tailed sea eagle were infected with L. toddi in 2000. Furthermore, in 2000, one of 65 imperial eagles was infected with Haemoproteus sp. We found no parasites in steppe eagles in either year, and no bird had multiple-species infections. These data are important because few hematologic studies of these eagle species have been conducted.
Phylogeny and biogeography of the imperial pigeons (Aves: Columbidae) in the Pacific Ocean.
Cibois, Alice; Thibault, Jean-Claude; Bonillo, Céline; Filardi, Christopher E; Pasquet, Eric
2017-05-01
We reconstruct the phylogeny of imperial pigeons (genus Ducula) using mitochondrial and nuclear sequence data. We evaluate the most likely biogeographic scenario for the evolution of this group that colonized many islands of the Pacific Ocean. The divergence time analysis suggests that the basal divergences within Ducula occurred more recently than in the fruit doves (genus Ptilinopus), a group that is also well diversified in Oceania. The imperial pigeons colonized the Melanesian region several times independently, and the diversification within this region led to several species in sympatry, in particular in the Bismarck archipelago. Central Polynesia was also colonized several times, first by a lineage during the Miocene that led to the large D. latrans, sister to the New Caledonian endemic D. goliath, then more recently by the widespread D. pacifica, during the Pleistocene. The phylogenetic pattern obtained with the extant Ducula species showed that the Eastern Polynesian endemics do not form a monophyletic group, with the Pacific Imperial Pigeon D. pacifica sister species with good support to the Polynesian Imperial Pigeon D. aurorae. However, the impact of recent anthropic extinctions has been important for the imperial pigeons, more than for the smaller fruit doves, suggesting that several Ducula lineages might be missing today. Copyright © 2017 Elsevier Inc. All rights reserved.
Improvements to the YbF electron electric dipole moment experiment
NASA Astrophysics Data System (ADS)
Sauer, B. E.; Rabey, I. M.; Devlin, J. A.; Tarbutt, M. R.; Ho, C. J.; Hinds, E. A.
2017-04-01
The standard model of particle physics predicts that the permanent electric dipole moment (EDM) of the electron is very nearly zero. Many extensions to the standard model predict an electron EDM just below current experimental limits. We are currently working to improve the sensitivity of the Imperial College YbF experiment. We have implemented combined laser-radiofrequency pumping techniques which both increase the number of molecules which participate in the EDM experiment and also increase the probability of detection. Combined, these techniques give nearly two orders of magnitude increase in the experimental sensitivity. At this enhanced sensitivity magnetic effects which were negligible become important. We have developed a new way to construct the electrodes for electric field plates which minimizes the effect of magnetic Johnson noise. The new YbF experiment is expected to comparable in sensitivity to the most sensitive measurements of the electron EDM to date. We will also discuss laser cooling techniques which promise an even larger increase in sensitivity.
ERIC Educational Resources Information Center
Goodman, Joyce
2018-01-01
This article explores the intersection of aspects of imperialism and internationalism in discussion of cinematography at the League of Nations, at the International Council of Women (ICW), and as they played out in the imperial, national and local flows around educational cinematography in the work of Suzanne Karpelès at the Institute of Buddhist…
ERIC Educational Resources Information Center
2000
The materials in this curriculum guide were designed to prepare teachers and students in grades 2-11 for the "Secret World of the Forbidden City: Splendors from China's Imperial Palace 1644-1911" exhibition at the Oakland Museum of California Education Department, to inform teachers and students about Imperial China, and to illuminate…
First captive breeding of the imperial parrot (Amazona imperialis).
Reillo, Paul R; Durand, Stephen; Burton, Minchinton
2011-01-01
We describe the rearing and development of the first imperial parrot (Amazona imperialis) hatched and raised in captivity. A single egg was hen-incubated for 28 days, and the chick was parent-fed for ∼14 days, after which it was removed for hand-rearing. Similar to wild, parent-reared imperial nestlings, the chick developed fully within 12 weeks, weaning at 540 g body weight. Endangered and endemic to Dominica, the imperial is a vital flagship for oceanic rainforest conservation. Chronicling the neonatal development of A. imperialis helps illuminate the natural history of this enigmatic species, whose secretive nesting habits and low population density have frustrated a detailed understanding of its ecology and reproduction. © 2010 Wiley-Liss, Inc.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coplen, T.B.
1973-10-01
Preliminary studies indicate that the Imperial Valley has a large geothermal potential. In order to delineate additional geothermal systems a chemical and isotopic investigation of samples from water wells, springs, and geothermal wells in the Imperial Valley and Yuma areas was conducted. Na, K, and Ca concentrations of nearly 200 well water, spring water, hot spring, and geothermal fluid samples from the Imperial Valley area were measured by atomic absorption spectrophotometry. Fournier and Truesdell's function was determined for each water sample. Suspected geothermal areas are identified. Hydrogen and oxygen isotope abundances were determined in order to determine and to identifymore » the source of the water in the Mesa geothermal system. (JGB)« less
46 CFR 70.25-1 - Electrical engineering details.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 3 2013-10-01 2013-10-01 false Electrical engineering details. 70.25-1 Section 70.25-1... General Electrical Engineering Requirements § 70.25-1 Electrical engineering details. All electrical engineering details and installations shall be designed and installed in accordance with subchapter J...
46 CFR 70.25-1 - Electrical engineering details.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 3 2010-10-01 2010-10-01 false Electrical engineering details. 70.25-1 Section 70.25-1... General Electrical Engineering Requirements § 70.25-1 Electrical engineering details. All electrical engineering details and installations shall be designed and installed in accordance with subchapter J...
46 CFR 90.25-1 - Electrical engineering details.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Electrical engineering details. 90.25-1 Section 90.25-1... PROVISIONS General Electrical Engineering Requirements § 90.25-1 Electrical engineering details. (a) All electrical engineering details and installations shall be designed and installed in accordance with...
46 CFR 90.25-1 - Electrical engineering details.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Electrical engineering details. 90.25-1 Section 90.25-1... PROVISIONS General Electrical Engineering Requirements § 90.25-1 Electrical engineering details. (a) All electrical engineering details and installations shall be designed and installed in accordance with...
46 CFR 70.25-1 - Electrical engineering details.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 3 2011-10-01 2011-10-01 false Electrical engineering details. 70.25-1 Section 70.25-1... General Electrical Engineering Requirements § 70.25-1 Electrical engineering details. All electrical engineering details and installations shall be designed and installed in accordance with subchapter J...
46 CFR 70.25-1 - Electrical engineering details.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 3 2014-10-01 2014-10-01 false Electrical engineering details. 70.25-1 Section 70.25-1... General Electrical Engineering Requirements § 70.25-1 Electrical engineering details. All electrical engineering details and installations shall be designed and installed in accordance with subchapter J...
46 CFR 70.25-1 - Electrical engineering details.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 3 2012-10-01 2012-10-01 false Electrical engineering details. 70.25-1 Section 70.25-1... General Electrical Engineering Requirements § 70.25-1 Electrical engineering details. All electrical engineering details and installations shall be designed and installed in accordance with subchapter J...
46 CFR 90.25-1 - Electrical engineering details.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Electrical engineering details. 90.25-1 Section 90.25-1... PROVISIONS General Electrical Engineering Requirements § 90.25-1 Electrical engineering details. (a) All electrical engineering details and installations shall be designed and installed in accordance with...
46 CFR 90.25-1 - Electrical engineering details.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Electrical engineering details. 90.25-1 Section 90.25-1... PROVISIONS General Electrical Engineering Requirements § 90.25-1 Electrical engineering details. (a) All electrical engineering details and installations shall be designed and installed in accordance with...
46 CFR 90.25-1 - Electrical engineering details.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Electrical engineering details. 90.25-1 Section 90.25-1... PROVISIONS General Electrical Engineering Requirements § 90.25-1 Electrical engineering details. (a) All electrical engineering details and installations shall be designed and installed in accordance with...
46 CFR 91.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...
46 CFR 91.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...
46 CFR 91.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...
46 CFR 91.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...
46 CFR 91.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...
[Association between Hajime Hoshi and Imperial princes].
Misawa, Miwa
2008-01-01
Hajime Hoshi established Hoshi Pharmaceutical Company in 1911, and developed it into the No. 1 pharmaceutical company of Japan by 1918. He had many well-known friends and acqaintances including Hirobumi Ito, Shinpei Goto, Koki Hirota, Hideyo Noguchi, Inazo Nitobe, Kojiro Matsushita and Mitsuru Toyama. In this paper, the Imperial Family (princes) who had personal relationships with Hajime Hoshi are reported. Six princes visited the factories of Hoshi Pharmaceutical Company and Hoshi Pharmaceutical Commercial School from 1922 to 1928. They were Princes Fushimino-miya, Asakano-miya, Chichibuno-miya, Kitashirakawano-miya, Takedano-miya and LiKen-Ko. Each of His Imperial Highnesses showed much enthusiasm when visiting the factories and school. They wished to see the latest world-scale modern factories that were producing important drugs and exporting them to advanced Western countries. The anniversary date of the founding of Hoshi University is May 18, the day on which Fushmino-miya visited the former school of the University. Hajime Hoshi named his daughter Yasuko after Prince Asakano-miya Yasuhiko. He used to receive invitations to visit from those princes, hold congenial talks with them, and was sometimes presented with Imperial gifts. Hoshi had a global view and warm character, and entertained a deep respect for the Imperial Family. Therefore, it is conjectured that the princes had a favorable impression for Hoshi. It is believed that the splendid historical association between Hajime Hoshi and the Imperial princes should be recorded as historical events.
Bryant, Thomas
2012-04-01
The physician and sexologist Albert Moll, from Berlin, was one of the main protagonists within the German discourse on the opportunities and dangers of social engineering, by eugenic interventions into human life in general, as well as into reproductive hygiene and healthcare policy in particular. One of the main sexological topics that were discussed intensively during the late-Wilhelminian German Reich and the Weimar Republic was the question of the legalisation of voluntary and compulsory sterilisations on the basis of medical, social, eugenic, economic or criminological indications. As is clear from Moll's conservative principles of medical ethics, and his conviction that the genetic knowledge required for eugenically indicated sterilisations was not yet sufficiently elaborated, he had doubts and worries about colleagues who were exceedingly zealous about these surgical sterilisations--especially Gustav Boeters from Saxony.
Geothermal steam condensate reinjection
NASA Technical Reports Server (NTRS)
Chasteen, A. J.
1974-01-01
Geothermal electric generating plants which use condensing turbines and generate and excess of condensed steam which must be disposed of are discussed. At the Geysers, California, the largest geothermal development in the world, this steam condensate has been reinjected into the steam reservoir since 1968. A total of 3,150,000,000 gallons of steam condensate has been reinjected since that time with no noticeable effect on the adjacent producing wells. Currently, 3,700,000 gallons/day from 412 MW of installed capacity are being injected into 5 wells. Reinjection has also proven to be a satisfactory method of disposing of geothermal condensate a Imperial Valley, California, and at the Valles Caldera, New Mexico.
Concentrating Solar Power Projects - Dahan Power Plant | Concentrating
Plant Country: China Location: Beijing Owner(s): Institute of Electrical Engineering of Chinese Academy Electricity Generation: 1,950 MWh/yr Contact(s): Fengli Du Company: Institute of Electrical Engineering of Electrical Engineering of Chinese Academy of Sciences Owner(s) (%): Institute of Electrical Engineering of
SI Units to be Used in Place of Imperial Units and Old Metric Units
ERIC Educational Resources Information Center
Australian Science Teachers Journal, 1975
1975-01-01
A table lists the following quantities in imperial units, old metric units, and SI units: mass, force, energy, torque, power, pressure, temperature, thermal conductivity, frequency, dynamic viscosity, and kinematic viscosity. (MLH)
Kharaka, Y.K.; Schroeder, R.A.; Setmire, J.G.; ,
2003-01-01
We conducted pilot-scale field experiments using nanofiltration membranes to lower the salinity and remove Se, As and other toxic contaminants from saline agricultural wastewater in the Imperial Valley, California, USA. Farmlands in the desert climate (rainfall - 7.4 cm/a) of Imperial Valley cover -200,000 ha that are irrigated with water (-1.7 km3 annually) imported from the Colorado River. The salinity (-850 mg/L) and concentration of Se (-2.5 ??g/L) in the Colorado River water are high and evapotranpiration further concentrates salts in irrigation drainage water, reaching salinities of 3,000-15,000 mg/L TDS and a median Se value of -30 ??g/L. Experiments were conducted with two commercially available nanofiltration membranes, using drainage water of varying composition, and with or without the addition of organic precipitation inhibitors. Results show that these membranes selectively remove more than 95% of Se, SO4, Mo, U and DOC, and -30% of As from this wastewater. Low percentages of Cl, NO3 and HCO3, with enough cations to maintain electrical neutrality also were removed. The product water treated by these membranes comprised more than 90% of the wastewater tested. Results indicate that the treated product water from the Alamo River likely will have less than 0.2 ??g/L Se, salinity of 300-500 mg/L TDS and other chemical concentrations that meet the water quality criteria for irrigation and potable use. Because acceptability is a major issue for providing treated wastewater to urban centers, it may be prudent to use the reclaimed water for irrigation and creation of lower salinity wetlands near the Salton Sea; an equivalent volume of Colorado River water can then be diverted for the use of increasing populations of San Diego and other urban centers in southern California. Nanofiltration membranes yield greater reclaimed-water output and require lower pressure and less pretreatment, and therefore are generally more cost effective than traditional reverse osmosis membranes.
46 CFR 189.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...
46 CFR 189.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...
46 CFR 189.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...
46 CFR 189.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...
46 CFR 189.25-30 - Electrical engineering equipment.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...
Seo, Gijae
2017-12-01
The purpose of this study is to understand the reality of imperial medicine by exploring the strategic attitude of the Japanese authority targeting the public who were not patients of Hansen's disease. For this purpose, this study examines the mass media data related to Hansen's disease published in Korea and Japan during the Japanese colonial rule. Research on Hansen's disease can be divided into medical, sociohistorical, social welfare, and human rights approach. There are medical studies and statistics on the dissemination of medical information about Hansen's disease and management measures, the history of the management of the disease, guarantee of the rights of the patients and the welfare environment, and studies on the autobiographical, literary writings and oral statements on the life and psychological conflicts of the patients. Among existing research, the topics of the study on Hansen's disease under the Japanese colonial rule include the history of the Sorokdo Island Sanatorium, investigation on the forced labor of the patients in the island, human rights violations against the patients, oral memoirs of the patients and doctors who practiced at that time. All of these studies are important achievements regarding the research on the patients. An important study of Hansen's disease in modern Japan is the work of Hujino Utaka, which introduces the isolation of and discrimination against the patients of Hansen's disease. Hujino Utaka's study examines the annihilation of people with infectious diseases in Japan and its colonies by the imperial government, which was the consequence of the imperial medical policies, and reports on the isolation of Hansen's disease patients during the war. Although these researches are important achievements in the study of Hansen's disease in modernity, their focus has mainly been on the history of isolation and exploitation in the Sorokdo Island Sanatorium and discrimination against the patients within the sanatorium, which was controlled by the director of the sanatorium. Consequently, the research tends to perceive the problem within the frame of antagonism between the agent of imperialism and the victims of exploitation by the hands of imperialism. Hence, it has limitations in that it has not fully addressed the problem of the people who were not Hansen's disease patients and as such, existed somewhere in between the two extremes in the process of administering medicine under the imperial rule. The purpose of this study is to identify the direction of imperial medicine in the history of Hansen's disease in Japan and to comprehend the characteristics of policy on Hansen's disease developed by Mitsuda Kensuke, who was behind the policy of imperial medicine, and examine the process of imperial medicine reaching out to the people (of Japan and its colonies). To achieve the goal, this study explores how the agent of imperial medicine gain the favor the public, who are not Hansen's disease patients, by means of the mass media. Specifically, this paper examines data in the Japanese language related to Korean patients of Hansen's disease including the mass media data on Hansen's disease in the source book titled The Collection of Data on Hansen's Disease in Joseon under the Colonial Rule(8 volumes) compiled by Takio Eiji, which has not been studied until now. It also reviews the cultural and popular magazines published in Japan and Joseon at that time.
experience includes mechanical and electrical system modeling and analysis, data sensing and sensor placement . Education Ph.D. in Mechanical Engineering, University of Massachusetts at Amherst; M.S. in Electrical Engineering, Institute of Electrical Engineering, Chinese Academy of Sciences; B.S. in Electrical Engineering
Region 9: California Imperial County Adequate Letter Enclosure (5/20/2008)
This document is the enclosure to the April 16, 2008, letter from EPA provides an adequacy finding for transportation conformity purposes the motor vehicle emissions budgets in the Imperial County 8-hour Ozone Early Progress Plan.
The Imperial Valley of California is critical to wintering Mountain Plovers
Wunder, Michael B.; Knopf, F.L.
2003-01-01
We surveyed Mountain Plovers (Charadrius montanus) wintering in the Imperial Valley of California in January 2001, and also recorded the types of crop fields used by plovers in this agricultural landscape. We tallied 4037 plovers in 36 flocks ranging in size from 4 to 596 birds. Plovers were more common on alfalfa and Bermudagrass fields than other field types. Further, most birds were on alfalfa fields that were currently being (or had recently been) grazed, primarily by domestic sheep. Plovers used Bermudagrass fields only after harvest and subsequent burning. Examination of Christmas Bird Count data from 1950–2000 indicated that the Mountain Plover has abandoned its historical wintering areas on the coastal plains of California. Numbers in the Central Valley seem to have undergone recent declines also. We believe that the cultivated landscape of the Imperial Valley provides wintering habitats for about half of the global population of Mountain Plovers. We attribute the current importance of the Imperial Valley for Mountain Plovers to loss of native coastal and Central Valley habitats rather than to a behavioral switching of wintering areas through time. Future changes in specific cropping or management practices in the Imperial Valley will have a major impact on the conservation status of this species.
1978-05-01
Program is a cooperative venture between RADC and some sixty-five universities eligible to participate in the program. Syracuse Uiaiversity (Department...of Electrical and Computer Engineering), Purdue University (School of Electrical Engineering), Georgia Institute of Technology (School of Electrical...Engineering), and State University of New York at Buffalo (Department of Electrical / ,./. / Engineering) act as prime contractor schools with other
Bryant, Thomas
2012-01-01
The physician and sexologist Albert Moll, from Berlin, was one of the main protagonists within the German discourse on the opportunities and dangers of social engineering, by eugenic interventions into human life in general, as well as into reproductive hygiene and healthcare policy in particular. One of the main sexological topics that were discussed intensively during the late-Wilhelminian German Reich and the Weimar Republic was the question of the legalisation of voluntary and compulsory sterilisations on the basis of medical, social, eugenic, economic or criminological indications. As is clear from Moll’s conservative principles of medical ethics, and his conviction that the genetic knowledge required for eugenically indicated sterilisations was not yet sufficiently elaborated, he had doubts and worries about colleagues who were exceedingly zealous about these surgical sterilisations – especially Gustav Boeters from Saxony. PMID:23002295
Microsystems Technology Symposium: Enabling Future Capability (BRIEFING CHARTS)
2007-03-07
Microsystems I t r t i r t Wireless and Networked Systems Embedded Computation Signal Processing Communications 4 Microsystems Technology Office: Enabling...Regency Ballroom) (Regency Ballroom) 1330 1400 Communciation Actuation 1430 (Imperial Ballroom) (Imperial Ballroom) 1500 1530 1600 1630 1700 1730 1800
Recreational Reuse of Waste Disposal Sites: Chanute Air Force Base, Illinois.
1983-11-01
Nickel Endrin Lead Heptachlor Zinc Heptachlor epoxide Mercury Lindane Silver MethoxychIor Barium Toxaphene Parathion Lagoon and Monitoring Well Water...Gleditisa T. I. Imperial Imperial Honey Locust Platanus acerifolia Bloodgood London Planetree Ulmus parvifolia True Chinese Elm (Populus alba) White
National Electrical Code in Power Engineering Course for Electrical Engineering Curriculum
ERIC Educational Resources Information Center
Azizur, Rahman M. M.
2011-01-01
In order to ensure the safety of their inhabitants and properties, the residential, industrial and business installations require complying with NEC (national electrical code) for electrical systems. Electrical design engineers and technicians rely heavily on these very important design guidelines. However, these design guidelines are not formally…
ERIC Educational Resources Information Center
Tang, Wendy; Westgate, Charles; Liu, Pao-Lo; Gouzman, Michael
2014-01-01
The Online Bachelor of Science in Electrical Engineering is a collaborative effort among three University Centers at SUNY (State University of New York), namely Stony Brook, Binghamton, and Buffalo. The program delivers the complete electrical engineering curriculum at the bachelor level to students online and asynchronously. Students, however,…
78 FR 72552 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-03
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company model GEnx-2B67 and GEnx-2B67B turbofan engines. This AD was prompted by the... certain serial number General Electric Company (GE) model GEnx-2B67 and GEnx-2B67B turbofan engines. The...
"Economics Imperialism", Education Policy and Educational Theory
ERIC Educational Resources Information Center
Allais, Stephanie
2012-01-01
This paper examines how economics imperialism (the increasing colonization of other disciplines by neoclassical economics) has affected contemporary education policies. I suggest that an increasing preoccupation with education meeting the needs of the economy, together with the prevalence of economic concepts outside of economics, have contributed…
Greene/Feizi - U of Penn; Imperial College | Division of Cancer Prevention
Principal Investigator: Mark Greene, MD, PhDInstitution: University of Pennsylvania, Philadelphia, PA Subcontract Principal Investigator: Ten Feizi, MD, FmedSciInstitution: Imperial College London Former Principal Investigator: Minoru Fukuda, PhD (retired)Institution: Sanford Burnham Medical Research Institute, La Jolla, CA |
Capability Development at Imperial Oil Resources Ltd.
ERIC Educational Resources Information Center
Ellerington, David; And Others
1992-01-01
Striving to be learning organization, Imperial Oil of Canada focused on organizational, divisional, and individual capability development. Lessons learned include the following: (1) all levels of employees are potential professionals; (2) learning must be continuous; (3) intrinsic motivation and commitment are essential; and (4) organizational…
77 FR 5064 - Post Office Closing
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-01
... POSTAL REGULATORY COMMISSION [Docket No. A2012-116; Order No. 1175] Post Office Closing AGENCY... the closing of the Imperial, Texas post office has been filed. It identifies preliminary steps and... four petitions for review of the Postal Service's determination to close the Imperial post office in...
Cultural Imperialism and the Marketing of Native America.
ERIC Educational Resources Information Center
Whitt, Laurie Anne
1995-01-01
Using capitalist market assumptions and legal theories, the Western legal system is extending practices of cultural imperialism to include commodification and marketing of indigenous cultural resources (medicinal and spiritual knowledge, ceremonies, and artistic expressions) and genetic resources (human DNA). Recognizing that law has never been…
46 CFR 111.01-15 - Temperature ratings.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS... assumed for all rotating electrical machinery in boiler rooms, engine rooms, auxiliary machinery rooms...-rotating electrical equipment in boiler rooms, in engine rooms, in auxiliary machinery rooms, and on...
46 CFR 111.01-15 - Temperature ratings.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS... is assumed for all rotating electrical machinery in boiler rooms, engine rooms, auxiliary machinery...-rotating electrical equipment in boiler rooms, in engine rooms, in auxiliary machinery rooms, and on...
46 CFR 111.01-15 - Temperature ratings.
Code of Federal Regulations, 2012 CFR
2012-10-01
... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS... is assumed for all rotating electrical machinery in boiler rooms, engine rooms, auxiliary machinery...-rotating electrical equipment in boiler rooms, in engine rooms, in auxiliary machinery rooms, and on...
46 CFR 111.01-15 - Temperature ratings.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS... is assumed for all rotating electrical machinery in boiler rooms, engine rooms, auxiliary machinery...-rotating electrical equipment in boiler rooms, in engine rooms, in auxiliary machinery rooms, and on...
46 CFR 111.01-15 - Temperature ratings.
Code of Federal Regulations, 2011 CFR
2011-10-01
... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS... assumed for all rotating electrical machinery in boiler rooms, engine rooms, auxiliary machinery rooms...-rotating electrical equipment in boiler rooms, in engine rooms, in auxiliary machinery rooms, and on...
engineering, Penn State, 2013 B.S. in electrical engineering, University of Wyoming, 2005 Prior Work of Electrical and Electronics Engineers (IEEE) Featured Publications Barrows, Clayton, Trieu Mai and Electrical Structure of the North American Electric Power Infrastructure." IEEE Systems
Designing, Implementing and Maintaining a First Year Project Course in Electrical Engineering
ERIC Educational Resources Information Center
Lillieskold, J.; Ostlund, S.
2008-01-01
Being a modern electrical engineer does not only require state of the art skills in areas such as transfer and processing of information, electronics, systems engineering, and biomedical electrical engineering; it also requires generic engineering skills such as oral and written communication, team building, interpersonal skills, and the ability…
Data Documentation for Navy Civilian Manpower Study,
1986-09-01
Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318
Integrated engine-generator concept for aircraft electric secondary power
NASA Technical Reports Server (NTRS)
Secunde, R. R.; Macosko, R. P.; Repas, D. S.
1972-01-01
The integrated engine-generator concept of locating an electric generator inside an aircraft turbojet or turbofan engine concentric with, and driven by, one of the main engine shafts is discussed. When properly rated, the generator can serve as an engine starter as well as a generator of electric power. The electric power conversion equipment and generator controls are conveniently located in the aircraft. Preliminary layouts of generators in a large engine together with their physical sizes and weights indicate that this concept is a technically feasible approach to aircraft secondary power.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-18
... the California State Implementation Plan, Antelope Valley Air Quality Management District and Imperial... Quality Management District (AVAQMD) and Imperial County Air Pollution Control District (ICAPCD) portions... Technology (RACT),'' adopted on February 23, 2010. * * * * * (G) Antelope Valley Air Quality Management...
C2 Rising: A Historical View of Our Critical Advantage
2014-08-01
Feature The Operations Room at Headquarters Royal Air Force Fighter Command, Bentley Priory. (From Imperial War Museum, © IWM [C 1869], http...Imperial War Museum, © IWM [CH 1401], http://www.iwm.org.uk/collections/item/object/205195667. Reprinted with permission.). July–August 2014 Air
Language Science and Orientalism in Imperial Germany
ERIC Educational Resources Information Center
Kaplan, Judith R. H.
2012-01-01
This dissertation addresses a significant gap in the historiography of science: the nature of the language sciences as "science." Focusing on disciplinary and intellectual developments in the context of Imperial Germany (1871-1918), the project anticipates, complicates, and helps to explain a widely recognized theoretical shift, namely,…
20 CFR 71.1 - General administrative provisions.
Code of Federal Regulations, 2010 CFR
2010-04-01
... HIDING FROM THE IMPERIAL JAPANESE GOVERNMENT GENERAL PROVISIONS § 71.1 General administrative provisions... Imperial Japanese Government to the same extent as if such civilian American citizen were an employee... Japanese Government on or after December 7, 1941, at Midway, Guam, Wake Island, the Philippine Islands, or...
Parallel Fault Strands at 9-km Depth Resolved on the Imperial Fault, Southern California
NASA Astrophysics Data System (ADS)
Shearer, P. M.
2001-12-01
The Imperial Fault is one of the most active faults in California with several M>6 events during the 20th century and geodetic results suggesting that it currently carries almost 80% of the total plate motion between the Pacific and North American plates. We apply waveform cross-correlation to a group of ~1500 microearthquakes along the Imperial Fault and find that about 25% of the events form similar event clusters. Event relocation based on precise differential times among events in these clusters reveals multiple streaks of seismicity up to 5 km in length that are at a nearly constant depth of ~9 km but are spaced about 0.5 km apart in map view. These multiples are unlikely to be a location artifact because they are spaced more widely than the computed location errors and different streaks can be resolved within individual similar event clusters. The streaks are parallel to the mapped surface rupture of the 1979 Mw=6.5 Imperial Valley earthquake. No obvious temporal migration of the event locations is observed. Limited focal mechanism data for the events within the streaks are consistent with right-lateral slip on vertical fault planes. The seismicity not contained in similar event clusters cannot be located as precisely; our locations for these events scatter between 7 and 11 km depth, but it is possible that their true locations could be much more tightly clustered. The observed streaks have some similarities to those previously observed in northern California along the San Andreas and Hayward faults (e.g., Rubin et al., 1999; Waldhauser et al., 1999); however those streaks were imaged within a single fault plane rather than the multiple faults resolved on the Imperial Fault. The apparent constant depth of the Imperial streaks is similar to that seen in Hawaii at much shallower depth by Gillard et al. (1996). Geodetic results (e.g., Lyons et al., 2001) suggest that the Imperial Fault is currently slipping at 45 mm/yr below a locked portion that extends to ~10 km depth. We interpret our observed seismicity streaks as representing activity on multiple fault strands at transition depths between the locked shallow part of the Imperial Fault and the slipping portion at greater depths. It is likely that these strands extend into the aseismic region below, suggesting that the lower crustal shear zone is at least 2 km wide.
7 CFR 52.3182 - Varietal types of dried prunes.
Code of Federal Regulations, 2011 CFR
2011-01-01
... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dried Prunes Product Description, Varietal... of French and Robe. (b) Type II. Italian. (c) Type III. Imperial; or Sugar; or a mixture of Imperial...
7 CFR 52.3182 - Varietal types of dried prunes.
Code of Federal Regulations, 2012 CFR
2012-01-01
... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dried Prunes Product Description, Varietal... of French and Robe. (b) Type II. Italian. (c) Type III. Imperial; or Sugar; or a mixture of Imperial...
Twenty Years of Cultural Imperialism Research: Some Conceptual and Methodological Problems.
ERIC Educational Resources Information Center
Burrowes, Carl Patrick
While the notion of "cultural imperialism" has received significant attention in communication studies since the early 1970s, researchers have ignored analyses of message systems and audience cultivation in favor of institutional analysis. Likewise, researchers have concentrated on the technologies, media products and processes of…
Linguistic Imperialism, Cultural Integrity, and EIL.
ERIC Educational Resources Information Center
Modiano, Marko
2001-01-01
Argues that while linguistic imperialism is real and needs to be addressed, one way for the language instructor to come to terms with the cultural imposition of English language teaching is to define English as an international language. Suggests promoting "prestige varieties" positions the practitioner as purveyor of Anglo-American hegemony and…
NASA Astrophysics Data System (ADS)
Burnett, Keith
2018-03-01
We discuss Danny Segal's key roles in the development of the spectroscopy of collision complexes at Imperial College and Oxford. We explain how his work lead to a number of new insights into collision dynamics in external fields.
Out of Place: Economic Imperialisms in Early Childhood Education
ERIC Educational Resources Information Center
Stuart, Margaret
2016-01-01
New Zealand has received world-wide accolades for its Early Childhood Education (ECE) curriculum, Te Whariki. This paper explores the tension between economic imperialism, and a curriculum acknowledged as visionary. The foundational ideas of Te Whariki emanate from sociocultural and anti-racist pedagogies. However, its implementation is hampered…
Developing an Integrated Institutional Repository at Imperial College London
ERIC Educational Resources Information Center
Afshari, Fereshteh; Jones, Richard
2007-01-01
Purpose: This paper aims to demonstrate how a highly integrated approach to repository development and deployment can be beneficial in producing a successful archive. Design/methodology/approach: Imperial College London undertook a significant specifications process to gather and formalise requirements for its repository system. This was done…
ERIC Educational Resources Information Center
Said, Edward W.
Growing out of a series of lectures given at universities in the United States, Canada, and England, this book reopens the dialogue between literature and the life of its time. It draws dramatic connections between the imperial endeavor and the culture that both reflected and reinforced it, describing a general pattern of relationships between the…
The Historiography of British Imperial Education Policy, Part I: India
ERIC Educational Resources Information Center
Whitehead, Clive
2005-01-01
Colonial education has been controversial and widely divergent interpretations have been offered from contrasting ideological perspectives. British imperial education policy was highly contended during the colonial era and remains a contentious issue amongst many contemporary historians and a critical review of the historiography of the subject is…
Linguistic Globalization and the Call Center Industry: Imperialism, Hegemony or Cosmopolitanism?
ERIC Educational Resources Information Center
Sonntag, Selma K.
2009-01-01
Linguistic imperialism, linguistic hegemony and linguistic cosmopolitanism are broad and contrasting conceptualizations of linguistic globalization that are frequently, if implicitly, invoked in the literature, both academic and non-academic, on language practices and perceptions in the call center industry. I begin with outlining each of these…
Language Choice and Cultural Imperialism: A Nigerian Perspective.
ERIC Educational Resources Information Center
Bisong, Joseph
1995-01-01
Argues against the thesis put forth in Phillipson's "Linguistic Imperialism," that the relationship between core English-speaking countries and periphery-English countries is one of dominant and dominated languages, as it applies to Nigeria. It is maintained that the sociolinguistic and sociocultural realities of the country have not…
Heat engine and electric motor torque distribution strategy for a hybrid electric vehicle
Boberg, Evan S.; Gebby, Brian P.
1999-09-28
A method is provided for controlling a power train system for a hybrid electric vehicle. The method includes a torque distribution strategy for controlling the engine and the electric motor. The engine and motor commands are determined based upon the accelerator position, the battery state of charge and the amount of engine and motor torque available. The amount of torque requested for the engine is restricted by a limited rate of rise in order to reduce the emissions from the engine. The limited engine torque is supplemented by motor torque in order to meet a torque request determined based upon the accelerator position.
First-year Engineering Education with the Creative Electrical Engineering Laboratory
NASA Astrophysics Data System (ADS)
Tsukamoto, Takehiko; Sugito, Tetsumasa; Ozeki, Osamu; Ushiroda, Sumio
The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects. We introduced the creative electrical engineering laboratory into the first-year engineering education since 1998. The laboratory concentrates on the practice exercise. The final questionnaire of students showed that our first-year education is very effective to promote students motivation and their scholastic ability in engineering.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-17
... CFR Parts 1724 and 1726 RIN 0572-AC20 Electric Engineering, Architectural Services, Design Policies... standard forms of contracts promulgated by RUS for construction, procurement, engineering services and... XVII of title 7 of the Code of Federal Regulations as follows: PART 1724--ELECTRIC ENGINEERING...
14 CFR 25.1165 - Engine ignition systems.
Code of Federal Regulations, 2010 CFR
2010-01-01
... automatically available as an alternate source of electrical energy to allow continued engine operation if any... simultaneous demands of the engine ignition system and the greatest demands of any electrical system components that draw electrical energy from the same source. (c) The design of the engine ignition system must...
14 CFR 25.1165 - Engine ignition systems.
Code of Federal Regulations, 2011 CFR
2011-01-01
... automatically available as an alternate source of electrical energy to allow continued engine operation if any... simultaneous demands of the engine ignition system and the greatest demands of any electrical system components that draw electrical energy from the same source. (c) The design of the engine ignition system must...
Monitoring means for combustion engine electric storage battery means
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miller, G. K.; Rautiola, R. E.; Taylor, R. E.
Disclosed, in combination, are a combustion engine, an electric storage battery, an electrically powered starter motor for at times driving the engine in order to start the engine, and an electrical system monitor; the electrical system monitor has a first monitoring portion which senses the actual voltage across the battery and a second monitoring portion which monitors the current through the battery; an electrical switch controls associated circuitry and is actuatable into open or closed conditions; whenever the first monitoring portion senses a preselected magnitude of the actual voltage across the battery or the second monitoring portion senses a preselectedmore » magnitude of the current flow through the battery, the electrical switch is actuated.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-19
... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR11-9-000] Imperial Oil and ExxonMobil Oil Corporation, v. Enbridge Pipelines (Southern Lights) LLC; Notice of Complaint Take notice... (Complainants) filed a formal complaint against Enbridge Pipelines (Southern Lights) LLC (Respondent...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-22
... unpaved roads and disturbed soils in open and agricultural areas in Imperial County. We are approving... maintain records demonstrating that they have limited opacity to 20% by one of three defined soil... C.30 was revised from: ``Applying or leaving plant residue or [[Page 23680
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-07
...: Regular Mail: BLM Director (210), Attention: Brenda Hudgens- Williams, P.O. Box 71383, Washington, DC 20024-1383. Overnight Mail: BLM Director (210), Attention: Brenda Hudgens- Williams, 20 M Street SE...; and visual resources. The Proposed Imperial Sand Dunes RAMP and CDCA Plan Amendment/Final EIS includes...
78 FR 71635 - Federal Property Suitable as Facilities To Assist the Homeless
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-29
...; poor conditions; asbestos/lead; contact Interior for more info. Imperial Dam Camp House 1 2400 Imperial.../upgrades needed; asbestos/lead; contact Interior for more info. Bldg. 2172 Marine Corps Air Ground Task... exterior/interior wood damage; asbestos/lead; secured area; contact Navy for more info. Bldg. 2175 Marine...
75 FR 34759 - Emergency Exemption: Issuance of Permit for Endangered Species
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-18
... Foundation, Loxahatchee, Florida, to import one captive- hatched imperial parrot (Amazona imperialis) for the... requested a permit to import the above-mentioned imperial parrot chick captive-hatched on May 6, 2010, at... species hatched in captivity anywhere in the world and was being parent-reared at the aviary until it was...
De/Scribing Squ*w: Indigenous Women and Imperial Idioms in the United States
ERIC Educational Resources Information Center
King, C. Richard
2003-01-01
Tracing the history of the term "squaw" offers insights into the positionings and politics of indigenous femininity in colonial America. Today, as throughout the colonization of Native America, imperial projects and projections have based themselves upon and imagined themselves through the lives, bodies, and images of indigenous women,…
"In Defence of Cricket": The Imperial Games Ethic in Victorian English Canada.
ERIC Educational Resources Information Center
Bennett, Paul L.
1989-01-01
Illustrates how societies can be judged by the athletic games they play through presentation of an exchange of letters appearing in the 1872 issues of the Upper Canada College newspaper. Shows how cricket, representing imperial society and muscular Christianity, was threatened by the Yankees and "American baseball." (LS)
Jane Austen and Imperialism--A Rereading of "Pride and Prejudice"
ERIC Educational Resources Information Center
Xu, Runjiang; Li, Yucheng
2009-01-01
This thesis attempts to search for the clues related to British domestic exploitation of the peasant labors and overseas colonization of other countries after rereading the novel "Pride and Prejudice," with an aim to bring out Austen's intimacy with Imperialism. It will offer some insights into a better understanding of provincial world…
Cultural and Linguistic Imperialism and the EIL Movement: Evidence from a Textbook Analysis
ERIC Educational Resources Information Center
Khodadady, Ebrahim; Shayesteh, Shaghayegh
2016-01-01
The perspective of English as an International Language (EIL) has been proposed mainly to alleviate the tenets of language and cultural imperialism and, of course, to facilitate communication through different varieties of English. Hence, English language classrooms are the preliminary venue for the inception of such a rudimentary movement.…
Learning To Divide the World: Education at Empire's End.
ERIC Educational Resources Information Center
Willinsky, John
The educational project of postcolonialism in the West is only beginning. Although decolonization began in earnest after World War II, the West is only starting to see beyond divisions generated by the same sensibilities that drove imperial expansion. This book examines one powerful source of those divisions--imperialism's influence on our…
The Garden and the Jungle: Burnett, Kipling and the Nature of Imperial Childhood
ERIC Educational Resources Information Center
Goodwin, Mary
2011-01-01
Imperial British India is the point of origin for protagonists in both Frances Hodgson Burnett's "The Secret Garden" (1911) and Rudyard Kipling's "The Jungle Books" (1894-1895), two influential children's stories in which late Victorian notions of childhood education and nature converge with those of national and imperial…
ERIC Educational Resources Information Center
Martz, Carlton
2002-01-01
This publication discusses issues related to imperialism. It examines the 1857 uprising against the British in India; examines how Hawaii became a U.S. territory at the turn of the 20th century; and reviews oil and U.S. energy policy, particularly the debate over drilling in the Arctic National Wildlife Refuge, an issue relevant to September 11,…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-24
... Imperial Sand Dunes Recreation Area (ISDRA) Subgroup of the California Desert District Advisory Council... Dunes Recreation Area Subgroup of the California Desert District Advisory Council (DAC) to the Bureau of... meeting for the California Desert District Advisory Council ISDRA Subgroup, c/o Bureau of Land Management...
7 CFR 52.3182 - Varietal types of dried prunes.
Code of Federal Regulations, 2010 CFR
2010-01-01
... PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dried Prunes Product Description, Varietal Types, Sizes, Grades § 52.3182 Varietal types of dried prunes. (a) Type I. French; or Robe; or a mixture of French and Robe. (b) Type II. Italian. (c) Type III. Imperial; or Sugar; or a mixture of Imperial...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-09
... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R09-OAR-2007-1073; FRL-9292-4] Revisions to the California State Implementation Plan, Imperial County Air Pollution Control District (ICAPCD... has established docket number EPA-R09-OAR-2007-1073 for this action. Generally, documents in the...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-09
... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R09-OAR-2007-1073; FRL-9263-8] Revisions to the California State Implementation Plan, Imperial County Air Pollution Control District AGENCY... 11, 2011. ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR- 2007-1073, by one of...
The Linguistic Imperialism of Neoliberal Empire
ERIC Educational Resources Information Center
Phillipson, Robert
2008-01-01
The article explores the transition from the linguistic imperialism of the colonial and postcolonial ages to the increasingly dominant role of English as a neoimperial language. It analyzes "global" English as a key dimension of the U.S. empire. U.S. expansionism is a fundamental principle of the foreign policy of the United States that can be…
Feminizing the Professional: The Government Reports of Flora Annie Steel.
ERIC Educational Resources Information Center
Sutcliffe, Rebecca J.
1998-01-01
Studies Flora Annie Steel, an uneducated woman who nonetheless became an Inspector of Female Schools in Punjab, India, in 1884. Focuses on her reports within the context of British imperialism and late 19th-century report conventions. Concludes that cultural expectations for women in imperialism influenced Steel's response to the genre; and the…
Blue Indians: Teaching the Political Geography of Imperialism with Fictional Film
ERIC Educational Resources Information Center
Madsen, Kenneth D.
2014-01-01
Fictional film provides an opportunity to breathe life into the application of academic concepts by capturing the attention and imagination of students. Using the 2009 hit movie "Avatar", it is argued that popular fiction has the potential to help students grasp the dynamics of imperial/indigenous relationships in part because it removes…
Moral imperialism and multi-centric clinical trials in peripheral countries.
Garrafa, Volnei; Lorenzo, Claudio
2008-10-01
Moral imperialism is expressed in attempts to impose moral standards from one particular culture, geopolitical region or culture onto other cultures, regions or countries. Examples of Direct Moral Imperialism can be seen in various recurrent events involving multi-centric clinical trials promoted by developed (central) countries in poor and developing (peripheral) countries, particularly projects related to the theory of double standards in research. After the WMA General Assembly refused to change the Helsinki Declaration - which would have given moral recognition to the above mentioned theory - the USA abandoned the declaration and began to promote regional seminars in peripheral countries with the aim of "training" researchers on ethical perspectives that reflect America's best interests. Individuals who received such training became transmitters of these central countries' ideas across the peripheral countries, representing a form of Indirect Moral Imperialism. The paper proposes the establishment of regulatory and social control systems for clinical trials implemented in peripheral countries, through the formulation of ethical norms that reflect the specific contexts of these countries, along with the drawing up and validation of their own national norms.
78 FR 76045 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-16
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... (AD) for General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines with certain high... turbofan engines with high pressure compressor (HPC) rotor stage 2-5 spools, part numbers (P/Ns) 351-103...
78 FR 50320 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-19
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) model GEnx-2B67B turbofan engines with booster anti-ice (BAI) air duct, part number...-2B67 turbofan engine be removed from the Applicability section of this AD. The commenters noted that...
78 FR 72567 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-03
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company (GE) GE90-110B1 and -115B turbofan engines. This AD was prompted by multiple... turbofan engines with variable bypass valve (VBV) actuator fuel supply tube, part number (P/N) 2165M22P01...
77 FR 3088 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-23
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) CF34-10E series turbofan engines. This AD was prompted by a report of heavy wear... turbofan engines installed on airplanes of U.S. registry. We also estimate that it will take about 8 work...
Neoteric Media as Tools for Process Intensification
NASA Astrophysics Data System (ADS)
Beh, C. C.; Mammucari, R.; Foster, N. R.
2017-06-01
Process intensification (PI) is a commonly used term in the chemical processing industry. When the concept of PI was first introduced in the late 1970s within the Imperial Chemical Industries (ICI) company, the main impetus was to reduce the processing cost without impairing the production rate. Neoteric media present as alternatives in chemical processing include gas-expanded liquids, ionic liquids, subcritical water, and combination of gas-expanded liquids and ionic liquids. The applications of neoteric media include particle engineering for improved bioavailability, controlled release of therapeutic implants, pharmaceutical formulations, extraction of natural products, nano-carriers for drug delivery, sterilisation of implants, and chemical reactions. This paper provides an overview of the use of these neoteric media.
Movements and landscape use of Eastern Imperial Eagles Aquila heliaca in Central Asia
Poessel, Sharon; Bragin, Evgeny A.; Sharpe, Peter B.; Garcelon, David K.; Bartoszuk, Kordian; Katzner, Todd E.
2018-01-01
Capsule: We describe ecological factors associated with movements of a globally declining raptor species, the Eastern Imperial Eagle Aquila heliaca.Aims: To describe the movements, habitat associations and resource selection of Eastern Imperial Eagles marked in Central Asia.Methods: We used global positioning system (GPS) data sent via satellite telemetry devices deployed on Eastern Imperial Eagles captured in Kazakhstan to calculate distances travelled and to associate habitat and weather variables with eagle locations collected throughout the annual cycle. We also used resource selection models to evaluate habitat use of tracked birds during autumn migration. Separately, we used wing-tagging recovery data to broaden our understanding of wintering locations of eagles.Results: Eagles tagged in Kazakhstan wintered in most countries on the Arabian Peninsula, as well as Iran and India. The adult eagle we tracked travelled more efficiently than did the four pre-adults. During autumn migration, telemetered eagles used a mixture of vegetation types, but during winter and summer, they primarily used bare and sparsely vegetated areas. Finally, telemetered birds used orographic updrafts to subsidize their autumn migration flight, but they relied on thermal updrafts during spring migration.Conclusion: Our study is the first to use GPS telemetry to describe year-round movements and habitat associations of Eastern Imperial Eagles in Central Asia. Our findings provide insight into the ecology of this vulnerable raptor species that can contribute to conservation efforts on its behalf.
Hirotani, Hayato
2005-09-01
The Department of Orthopaedic and Musculoskeletal Surgery, Graduate School of Medicine, Kyoto University (formerly the Department of Orthopaedic Surgery, Kyoto Medical School, Kyoto Imperial University) was founded by Imperial Ordinance, Article No. 89 issued on April 23, 1906. On May 4, 1906, Dr. Shinichiro Asahara, Assistant Professor of the Department of Surgery, was appointed as the first director of the Department of Orthopaedic Surgery, Kyoto Medical School, Kyoto Imperial University. Dr. Michiharu Matsuoka, Assistant Doctor of the Department of Surgery, Tokyo Medical School, Imperial University of Tokyo, was appointed Assistant Professor of Surgery, Kyoto Medical School, Kyoto Imperial University in March 1901. From August 1903 to May 1906, he studied orthopaedic surgery in Germany and returned on May 5, 1906. Dr. Matsuoka was appointed as the director and chief of the Department on May 13, 1906 and took over Dr. Asahara's position. On June 18, 1906, Dr. Matsuoka started his clinic and began giving lectures on orthopaedic surgery. This was the first department of orthopaedic surgery among the Japanese medical schools. Dr. Matsuoka was appointed as Professor in 1907. He had to overcome several obstacles to establish the medical department of a new discipline that had never existed in Japanese medical schools. This article discusses Dr. Matsuoka's contributions to establishing and developing orthopaedic surgery in Japan in the Meiji-era.
Electric turbocompound control system
Algrain, Marcelo C [Dunlap, IL
2007-02-13
Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.
[Physical anthropology studies at Keijo Imperial University Medical School].
Kim, Ock-Joo
2008-12-01
Medical research during the Japanese Colonial Period became systematic and active after the Keijo Imperial University Medical School was established in 1926. Various kinds of research were conducted there including pharmacological, physiological, pathological and parasitological research. The Keijo Imperial University was give a mission to study about Korea. Urgent topics for medical research included control of infectious diseases, hygiene and environmental health that might have affected colonizing bodies of the Japanese as well as the colonized. The bodies of Koreans had been studied by Japanese even before the establishment of the University. The Keijo Imperial University research team, however, organized several field studies for physical anthropology and blood typing research at the national scale to get representative sampling of the people from its north to its south of the Korean peninsula. In the filed, they relied upon the local police and administrative power to gather reluctant women and men to measure them in a great detail. The physical anthropology and blood typing research by the Japanese researchers was related to their eagerness to place Korean people in the geography of the races in the world. Using racial index R.I.(= (A%+AB%)/(B%+AB%)), the Japanese researchers put Koreans as a race between the Mongolian and the Japanese. The preoccupation with constitution and race also pervasively affected the medical practice: race (Japanese, Korean, or Japanese living in Korea) must be written in every kind of medical chart as a default. After the breakout of Chinese-Japanese War in 1937, the Keijo Imperial University researchers extended its physical anthropology field study to Manchuria and China to get data on physics of the people in 1940. The Japanese government and research foundations financially well supported the Keijo Imperial University researchers and the field studies for physical anthropology in Korea, Manchuria and China. The physical anthropology research was actively conducted hand in hand with imperialistic expansion, and driven by zeal for measuring the body.
China’s Aerospace Industry: Technology, Funding and Modernization
1992-01-01
7 was to use a General Electric F404 engine (from the F-20 Tigershark) along with other foreign engines as candidates but that program was again...firms like General Electric and Pratt & Whitney. As the Chinese engine industry gets more behind, more foreign engines are chosen, and the factories have... Electric since 1984.81 Liming Engine Plant makes compressor disks and turbine disks for GE and turbine disks for Pratt & Whitney while the Chengdu Engine
Space Electric Research Test in the Electric Propulsion Laboratory
1964-06-21
Technicians prepare the Space Electric Research Test (SERT-I) payload for a test in Tank Number 5 of the Electric Propulsion Laboratory at the National Aeronautics and Space Administration (NASA) Lewis Research Center. Lewis researchers had been studying different methods of electric rocket propulsion since the mid-1950s. Harold Kaufman created the first successful engine, the electron bombardment ion engine, in the early 1960s. These electric engines created and accelerated small particles of propellant material to high exhaust velocities. Electric engines have a very small amount of thrust, but once lofted into orbit by workhorse chemical rockets, they are capable of small, continuous thrust for periods up to several years. The electron bombardment thruster operated at a 90-percent efficiency during testing in the Electric Propulsion Laboratory. The package was rapidly rotated in a vacuum to simulate its behavior in space. The SERT-I mission, launched from Wallops Island, Virginia, was the first flight test of Kaufman’s ion engine. SERT-I had one cesium engine and one mercury engine. The suborbital flight was only 50 minutes in duration but proved that the ion engine could operate in space. The Electric Propulsion Laboratory included two large space simulation chambers, one of which is seen here. Each uses twenty 2.6-foot diameter diffusion pumps, blowers, and roughing pumps to remove the air inside the tank to create the thin atmosphere. A helium refrigeration system simulates the cold temperatures of space.
78 FR 38195 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-26
... Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... all General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines. This emergency AD was.... owners and operators of these GE90-110B1 and GE90-115B turbofan engines. This action was prompted by...
78 FR 19983 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-03
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) CF34-8C and CF34-8E turbofan engines with certain part numbers (P/N) of operability...-8E6, and CF34-8E6A1 turbofan engines, with an operability bleed valve (OBV) part number (P/N...
Alternative Fuels Data Center: Vehicle Search
ZeroTruck Search Engines and Hybrid Systems For medium- and heavy-duty vehicles: Engine & Power Sources Hydraulic hybrid Hybrid - CNG Hybrid - Diesel Electric Hybrid - LNG Hybrid Search x Pick Engine Fuel Natural Gas Propane Electric Plug-in Hybrid Electric Hydraulic hybrid Hybrid Search x Pick Engine Fuel
ERIC Educational Resources Information Center
Regis, Humphrey A.
Cultural imperialism is seen not as a static phenomenon but as a dynamic process in which the more developed countries (the dominating "centers" of the world system) influence the less developed countries (the dominated "periphery" of the system). In this process the more developed countries produce artifacts and content that…
Ideology, Linguistic Capital and the Medium of Instruction in Hong Kong.
ERIC Educational Resources Information Center
Morrison, Keith; Lui, Icy
2000-01-01
Examines the links between linguistic capital, cultural capital, linguistic imperialism, and the use of English as the medium of instruction (MOI) in Hong Kong. Suggests that the notion of linguistic imperialism in Hong Kong is superceded by the notion of linguistic capital, although neither presents a complete analysis of the MOI issue in Hong…
ERIC Educational Resources Information Center
Pietsch, Tamson
2011-01-01
Since its Foundation in 1901, the Rhodes Scholarships scheme has been held up as the archetype of a programme designed to foster imperial citizens. However, though impressive in scale, Cecil Rhodes's foundation was not the first to bring colonial students to Britain. Over the course of the previous half-century, governments, universities and…
ERIC Educational Resources Information Center
Inglis, W. F. J.
1979-01-01
This study sought to determine what types of history were emphasized by the Examination Boards and thus to throw light on the experience in history which was gained by candidates for these exams. A bias toward the political history of the imperial power was found. (Author/SJL)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-28
... Conformity Determination in an open house format. DoN representatives will be available at informational... Determination are available for public review at the following libraries: 1. City of El Centro Public Library, 1140 North Imperial Avenue, El Centro, California 92243. 2. City of Imperial Public Library, 200 West...
ERIC Educational Resources Information Center
Miles, Steven B.
2015-01-01
This review essay analyzes the historiography of Confucian academies ("shuyuan") in imperial China, focusing on five representative books published in China between 2008 and 2014, including two new editions of books originally published in 1995 and 2004. The five authors share a deep concern about the nature of academies, particularly…
Philosophy and Education in Stoicism of the Roman Imperial Era
ERIC Educational Resources Information Center
Reydams-Schils, G.
2010-01-01
The Stoics of the Roman Imperial period share the imperative that education should not focus on erudition for its own sake, but contribute to the pursuit of the good life as they define it in philosophical terms. Hence these later Stoics express similar concerns about the technical and theoretical aspects of philosophy as they do about…
USDA-ARS?s Scientific Manuscript database
Infestations of the pink hibiscus mealybug, Maconellicoccus hirsutus (Green), in ornamental trees were already in an advanced state at the time of its discovery in the Imperial Valley of California (USA) in August 1999. Concern about the spread of M. hirsutus beyond the Imperial Valley led to the p...
A Groundwater Model to Assess Water Resource Impacts at the Imperial East Solar Energy Zone
DOE Office of Scientific and Technical Information (OSTI.GOV)
Quinn, John; Greer, Chris; O'Connor, Ben L.
2013-12-01
The purpose of this study is to develop a groundwater flow model to examine the influence of potential groundwater withdrawal to support the utility-scale solar energy development at the Imperial East Solar Energy Zone (SEZ) as a part of the Bureau of Land Management’s (BLM) solar energy program.
Indigenous Ownership and the Emergence of U.S. Liberal Imperialism
ERIC Educational Resources Information Center
Konkle, Maureen
2008-01-01
Scholars have remarked upon the powerful--and frustrating, for analysis--abstractions of U.S. imperialism. The idea of empire itself is completely naturalized (thus the way of life) but also utterly depoliticized (thus the difficulty of recognizing it as a historical process comparable to others). By the 1830s the nation itself was understood as…
Tung Chung Shu and the Ideological Transformation of Confucian Educational Thought.
ERIC Educational Resources Information Center
Brown, Hubert O.
This paper examines Tung's ideas of Chinese education for the ruler, for the common people, and for government servants. Tung, an important educational theorist and Confucian philosopher in China's history, suggested the imperial examination system which led to employment in the imperial civil service. It is the thesis of this paper that there was…
Comments on John Willinsky's Learning to Divide the World: Education at Empire's End
ERIC Educational Resources Information Center
Wang, Tsung Juang
2006-01-01
John Willinsky's view that imperialism and its legacy remain the driving force that divides the world into "superior" and "inferior" cultures fails to take into account other forces that also encourage peoples of different cultures to emphasize the differences between themselves. He is correct in noting that imperialism led to much injustice and…
Enlightenment and the "Heart of Darkness": (Neo)Imperialism in the Congo, and Elsewhere
ERIC Educational Resources Information Center
Stronach, Ian
2006-01-01
This article approaches the current state of qualitative inquiry by constructing an allegory of neo-imperialism. It is based substantively on a history and contemporary anthro-politics of the Congo and in particular the city of Kisangani; metaphorically on Conrad's unsettling deployment of that same place as "the heart of darkness"; and…
44. LOCK, ELECTRICAL SYSTEM, HAULAGE ENGINES, ELECTRICAL DETAILS AND LOCATION. ...
44. LOCK, ELECTRICAL SYSTEM, HAULAGE ENGINES, ELECTRICAL DETAILS AND LOCATION. February 1938 - Mississippi River 9-Foot Channel Project, Lock & Dam No. 17, Upper Mississippi River, New Boston, Mercer County, IL
78 FR 56594 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-13
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company (GE) GE90-76B, -85B, -90B, -94B, -110B1, and - 115B turbofan engines. This AD was...) Applicability This AD applies to General Electric Company (GE): (1) GE90-76B, -85B, -90B, and -94B turbofan...
Electron Bombardment Ion Thruster
1970-08-21
Researchers at the Lewis Research Center had been studying different methods of electric rocket propulsion since the mid-1950s. Harold Kaufman created the first successful engine, the electron bombardment ion engine, in the early 1960s. Over the ensuing decades Lewis researchers continued to advance the original ion thruster concept. A Space Electric Rocket Test (SERT) spacecraft was launched in June 1964 to test Kaufman’s engine in space. SERT I had one cesium engine and one mercury engine. The suborbital flight was only 50 minutes in duration but proved that the ion engine could operate in space. This was followed in 1966 by the even more successful SERT II, which operated on and off for over ten years. Lewis continued studying increasingly more powerful ion thrusters. These electric engines created and accelerated small particles of propellant material to high exhaust velocities. Electric engines have a very small amount of thrust and are therefore not capable of lifting a spaceship from the surface of the Earth. Once lofted into orbit, however, electric engines are can produce small, continuous streams of thrust for several years.
78 FR 24671 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-26
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... certain General Electric Company (GE) CF6-80C2 series turbofan engines. That AD currently requires.../B1F/B2F/B4F/B6F/B7F/D1F turbofan engines with any of the following installed: (1) Fuel tube, part...
78 FR 47534 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-06
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... directive (AD) 2013-14-51 for General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines with... all known U.S. owners and operators of GE90-110B1 and GE90-115B turbofan engines. AD 2013-14-51...
46 CFR 96.05-1 - Installation and details.
Code of Federal Regulations, 2013 CFR
2013-10-01
... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communications Systems § 96.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or... be in accordance with the requirements of subchapter J (Electrical Engineering) of this chapter...
46 CFR 77.05-1 - Installation and details.
Code of Federal Regulations, 2014 CFR
2014-10-01
... MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communication Systems § 77.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or interior... accordance with the requirements of subchapter J (Electrical Engineering) of this chapter. Systems of this...
46 CFR 77.05-1 - Installation and details.
Code of Federal Regulations, 2012 CFR
2012-10-01
... MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communication Systems § 77.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or interior... accordance with the requirements of subchapter J (Electrical Engineering) of this chapter. Systems of this...
46 CFR 96.05-1 - Installation and details.
Code of Federal Regulations, 2012 CFR
2012-10-01
... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communications Systems § 96.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or... be in accordance with the requirements of subchapter J (Electrical Engineering) of this chapter...
46 CFR 77.05-1 - Installation and details.
Code of Federal Regulations, 2010 CFR
2010-10-01
... MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communication Systems § 77.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or interior... accordance with the requirements of subchapter J (Electrical Engineering) of this chapter. Systems of this...
46 CFR 96.05-1 - Installation and details.
Code of Federal Regulations, 2014 CFR
2014-10-01
... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communications Systems § 96.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or... be in accordance with the requirements of subchapter J (Electrical Engineering) of this chapter...
46 CFR 96.05-1 - Installation and details.
Code of Federal Regulations, 2011 CFR
2011-10-01
... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communications Systems § 96.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or... be in accordance with the requirements of subchapter J (Electrical Engineering) of this chapter...
46 CFR 96.05-1 - Installation and details.
Code of Federal Regulations, 2010 CFR
2010-10-01
... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communications Systems § 96.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or... be in accordance with the requirements of subchapter J (Electrical Engineering) of this chapter...
46 CFR 77.05-1 - Installation and details.
Code of Federal Regulations, 2011 CFR
2011-10-01
... MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communication Systems § 77.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or interior... accordance with the requirements of subchapter J (Electrical Engineering) of this chapter. Systems of this...
46 CFR 77.05-1 - Installation and details.
Code of Federal Regulations, 2013 CFR
2013-10-01
... MISCELLANEOUS SYSTEMS AND EQUIPMENT Electrical Engineering and Interior Communication Systems § 77.05-1 Installation and details. (a) The installation of all systems of an electrical engineering or interior... accordance with the requirements of subchapter J (Electrical Engineering) of this chapter. Systems of this...
Laboratory Manual, Electrical Engineering 25.
ERIC Educational Resources Information Center
Syracuse Univ., NY. Dept. of Electrical Engineering.
Developed as part of a series of materials in the electrical engineering sequence developed under contract with the United States Office of Education, this laboratory manual provides nine laboratory projects suitable for a second course in electrical engineering. Dealing with resonant circuits, electrostatic fields, magnetic devices, and…
NASA Astrophysics Data System (ADS)
Macdonald, I.; Blunt, M. J.; Maitland, G. C.
2017-12-01
Carbonate reservoirs hold the majority of CO2 sequestration potential, however, they are also more complicated than sandstone reservoirs in terms of heterogeneity and potential reactivity impact on operations. There are both significant carbonate reservoir CO2 sinks and CO2 point sources around Qatar making carbon capture and storage a potential decarbonisation pathway. The Qatar Carbonates and Carbon Storage Research Centre (QCCSRC) was formed in 2009 to address the gaps in our current knowledge of both local carbonate reservoir platforms and how CO2 would behave post sequestration. Our work spans 35 graduated PhD students, 10 still studying, 29 post-doctoral researchers, 18 faculty members all aided by 5 support staff and more than 100 MSc and summer students from 30 different countries, the centre has published over 150 papers in over 40 different journals. Our research is based within the Department of Chemical Engineering and the Department of Earth Science and Engineering. Our team annually attends over 20 conferences world-wide to disseminate our findings and activity engage in outreach events (UNFCCC, science festivals, social media, science bars, school visits, etc.). QCCSRC is a research framework agreement over 10 years and valued at $70 million between Qatar Petroleum, Shell, the Qatar Science and Technology Park and Imperial College London bringing together each organisation's unique capabilities. This novel quadruple helix management structure is responsible for the largest single industrially funded research programme conducted at Imperial College London. Our research has focused on data to create and/or improve predictive models for CO2 storage in carbonate reservoirs. Our three broad thematic areas include: Rocks : Rock-fluid interactions : Fluid-fluid interactions and are supported by 5 laboratories. Overall this unique programme is an example of how to approach grand challenges in the energy-carbon dilemma through long-term and multidisciplinary cooperative research.
Setmire, J.G.; Schroeder, R.A.; Densmore, J.N.; Goodbred, S.O.; Audet, D.J.; Radke, W.R.
1993-01-01
Results of a detailed study by the National Irrigation Water-Quality Program (NIWQP), U.S. Department of the Interior, indicate that factors controlling contaminant concentrations in subsurface irrigation drainwater in the Imperial Valley are soil characteristics, hydrology, and agricultural practices. Higher contaminant concentrations commonly were associated with clayey soils, which retard the movement of irrigation water and thus increase the degree of evaporative concentration. Regression of hydrogen- and oxygen-isotope ratios in samples collected from sumps yields a linear drainwater evaporation line that extrapolates through the isotopic composition of Colorado River water, thus demonstrating that Colorado River water is the sole source of subsurface drainwater in the Imperial Valley. Ratios of selenium to chloride indicate that selenium present in subsurface drainwater throughout the Imperial Valley originates from the Colorado River. The selenium load discharged to the Salton Sea from the Alamo River, the largest contributor, is about 6.5 tons/yr. Biological sampling and analysis showed that drainwater contaminants, including selenium, boron, and DDE, are accumulating in tissues of migratory and resident birds that use food sources in the Imperial Valley and the Salton Sea. Selenium concentration in fish-eating birds, shorebirds, and the endangered Yuma clapper rail were at levels that could affect reproduction. Boron concentrations in migratory waterfowl and resident shorebirds were at levels that potentially could cause reduced growth in young. As a result of DDE contamination of food sources, waterfowl and fish-eating birds in the Imperial Valley may be experiencing reproductive impairment.
Diesel Engine Waste Heat Recovery Utilizing Electric Turbocompound Technology
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hopman, Ulrich,; Kruiswyk, Richard W.
2005-07-05
Caterpillar's Technology & Solutions Division conceived, designed, built and tested an electric turbocompound system for an on-highway heavy-duty truck engine. The heart of the system is a unique turbochargerr with an electric motor/generator mounted on the shaft between turbine and compressor wheels. When the power produced by the turbocharger turbine exceeds the power of the compressor, the excess power is converted to electrical power by the generator on the turbo shaft; that power is then used to help turn the crankshaft via an electric motor mounted in the engine flywheel housing. The net result is an improvement in engine fuelmore » economy. The electric turbocompound system provides added control flexibility because it is capable of varying the amount of power extracted from the exhaust gases, thus allowing for control of engine boost. The system configuration and design, turbocharger features, control system development, and test results are presented.« less
Student-inspired activities for the teaching and learning of engineering ethics.
Alpay, E
2013-12-01
Ethics teaching in engineering can be problematic because of student perceptions of its subjective, ambiguous and philosophical content. The use of discipline-specific case studies has helped to address such perceptions, as has practical decision making and problem solving approaches based on some ethical frameworks. However, a need exists for a wider range of creative methods in ethics education to help complement the variety of activities and learning experiences within the engineering curriculum. In this work, a novel approach is presented in which first-year undergraduate students are responsible for proposing ethics education activities of relevance to their peers and discipline area. The students are prepared for the task through a short introduction on engineering ethics, whereby generic frameworks for moral and professional conduct are discussed, and discipline and student-relevance contexts provided. The approach has been used in four departments of engineering at Imperial College London, and has led to the generation of many creative ideas for wider student engagement in ethics awareness, reflection and understanding. The paper presents information on the premise of the introductory sessions for supporting the design task, and an evaluation of the student experience of the course and task work. Examples of proposals are given to demonstrate the value of such an approach to teachers, and ultimately to the learning experiences of the students themselves.
46 CFR 167.40-1 - Electrical installations.
Code of Federal Regulations, 2011 CFR
2011-10-01
... (Electrical Engineering) of this chapter. (3) Institute of Electrical and Electronic Engineers, Inc. (IEEE... 46 Shipping 7 2011-10-01 2011-10-01 false Electrical installations. 167.40-1 Section 167.40-1... SHIPS Certain Equipment Requirements § 167.40-1 Electrical installations. (a) Except as otherwise...
46 CFR 167.40-1 - Electrical installations.
Code of Federal Regulations, 2012 CFR
2012-10-01
... (Electrical Engineering) of this chapter. (3) Institute of Electrical and Electronic Engineers, Inc. (IEEE... 46 Shipping 7 2012-10-01 2012-10-01 false Electrical installations. 167.40-1 Section 167.40-1... SHIPS Certain Equipment Requirements § 167.40-1 Electrical installations. (a) Except as otherwise...
46 CFR 167.40-1 - Electrical installations.
Code of Federal Regulations, 2014 CFR
2014-10-01
... (Electrical Engineering) of this chapter. (3) Institute of Electrical and Electronic Engineers, Inc. (IEEE... 46 Shipping 7 2014-10-01 2014-10-01 false Electrical installations. 167.40-1 Section 167.40-1... SHIPS Certain Equipment Requirements § 167.40-1 Electrical installations. (a) Except as otherwise...
46 CFR 167.40-1 - Electrical installations.
Code of Federal Regulations, 2013 CFR
2013-10-01
... (Electrical Engineering) of this chapter. (3) Institute of Electrical and Electronic Engineers, Inc. (IEEE... 46 Shipping 7 2013-10-01 2013-10-01 false Electrical installations. 167.40-1 Section 167.40-1... SHIPS Certain Equipment Requirements § 167.40-1 Electrical installations. (a) Except as otherwise...
Integrated engine generator for aircraft secondary power
NASA Technical Reports Server (NTRS)
Secunde, R. R.
1972-01-01
An integrated engine-generator for aircraft secondary power generation is described. The concept consists of an electric generator located inside a turbojet or turbofan engine and both concentric with and driven by one of the main engine shafts. The electric power conversion equipment and generator controls are located in the aircraft. When properly rated, the generator serves as an engine starter as well as a source of electric power. This configuration reduces or eliminates the need for an external gear box on the engine and permits reduction in the nacelle diameter.
NASA Astrophysics Data System (ADS)
Yang, Chao; Song, Jian; Li, Liang; Li, Shengbo; Cao, Dongpu
2016-08-01
This paper presents an economical launching and accelerating mode, including four ordered phases: pure electrical driving, clutch engagement and engine start-up, engine active charging, and engine driving, which can be fit for the alternating conditions and improve the fuel economy of hybrid electric bus (HEB) during typical city-bus driving scenarios. By utilizing the fast response feature of electric motor (EM), an adaptive controller for EM is designed to realize the power demand during the pure electrical driving mode, the engine starting mode and the engine active charging mode. Concurrently, the smoothness issue induced by the sequential mode transitions is solved with a coordinated control logic for engine, EM and clutch. Simulation and experimental results show that the proposed launching and accelerating mode and its control methods are effective in improving the fuel economy and ensure the drivability during the fast transition between the operation modes of HEB.
Imperial Contradictions: Is the Valley a Watershed, Region, or Cyborg?
ERIC Educational Resources Information Center
Rudy, Alan P.
2005-01-01
Is California's Imperial Valley a watershed? If so, at what level and by what topographic logic? Is it a region? If so, at what level and by what geographic logic? Are its boundaries natural, political, or multivalent on different scales? In short, this essay looks at the special (re)production of environmental conditions within a cyborg world.…
ERIC Educational Resources Information Center
Fejes, Fred
The media imperialism approach to studies of communications in South America lacks sensitivity to the historical dimension, and tends to define the issues of western media imperialism in the context of the United States post-World War II ascendancy to world power. Through an examination of the expansion of U. S. communication interests into Latin…
ERIC Educational Resources Information Center
Neuhaus, Dolf-Alexander
2016-01-01
This article sets out to elucidate the role of Japanese Protestants in the education of Koreans during the early twentieth century. Scholarship has often assigned only marginal roles to Japanese Protestants within the history of Japanese imperialism, despite the remarkable success of western missionaries in Korea at the time. As imperial expansion…
USDA-ARS?s Scientific Manuscript database
A new virus that appears to be related to but distinct from Squash vein yellowing virus (SqVYV), a Bemisia tabaci-transmitted ipomovirus (family Potyviridae) that occurs in Florida was found in fall 2014 in Imperial County, CA infecting pumpkin and melon plants and exhibiting symptoms of stunting an...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-23
... Railroad, Inc.--Change in Operator Exemption-- Rail Line of San Diego and Arizona Eastern Railway Company... 1150.31 to change operators from San Diego & Imperial Valley Railroad Company, Inc. (SDIY) \\1\\ to PIR... City, Cal. (Desert Line). The Desert Line is owned by San Diego and Arizona Eastern Railway Company (SD...
Syllabus for Use in Imperial Chinese History.
ERIC Educational Resources Information Center
Husum, Carol
This syllabus is for a one semester course in the history of Imperial China, a study of the development of the world's oldest civilization still in existence. Emphasis is placed upon the cultural as well as the political and economic development of China until 1644. Major topics in the course outline are: 1) The Origins and Geography of China; 2)…
2014-06-13
bicycle. If it slows down, it could fall off, and the earth might quake ” (Behar 2008c). In order to maintain this momentum, China aggressively...ANALYSIS Rise like Lions after slumber In unvanquishable number — Shake your chains to earth like dew Which in your sleep had fallen on you— Ye are
Martha Whiteley of Imperial College, London: A Pioneering Woman Chemist
ERIC Educational Resources Information Center
Nicholson, Rafaelle M.; Nicholson, John W.
2012-01-01
Martha Whiteley (1866-1956) was one of the most important women chemists in the United Kingdom in the first half of the 20th century. In a male-dominated field, she was an academic on the staff of a co-educational university, Imperial College, London, where she carried out research of her own choosing, rather than assisting a male professor. She…
Healing the Empire: Indian Hospitals in Britain and France during the First World War.
Jarboe, Andrew Tait
2015-01-01
Desperate for soldiers to stem the German onrush in late 1914, the British deployed some 135,000 Indian riflemen--known as sepoys--to the trenches of France and Belgium. Between October 1914 and December 1915, these soldiers fought at the battles of Ypres, Festubert, Givenchy, Neuve Chapelle, Second Ypres, and Loos, suffering some 34,252 casualties. This article looks to the experiences of these men at segregated hospitals in France and England from 1914 to 1915. These hospitals served many of the same dual purposes facilitated by hospitals for English soldiers: namely, they sustained the war-making capacity of the Indian battalions. The Indian hospitals also functioned as sites of propaganda, reaffirming the ideologies and racial hierarchies of imperial rule for audiences at home, abroad, and within the hospital wards. But as this article demonstrates, wounded Indian sepoys were rarely, if ever, mere pawns on the imperial chessboard. Hospital authorities were committed to two policies: returning sepoys to the front and protecting White prestige. Sepoys successfully resisted both. In so doing, Indian hospitals became what British hospital administrators hoped they would not: spaces where imperial subjects contested and even reshaped some of the policies and ideologies of imperial rule.
Albert Howard and the mycorrhizal association.
Sheldrake, Merlin
2012-03-01
Albert Howard worked as an imperial agronomist for the British Government in India. Following his retirement in 1931, he returned to England and embarked on a passionate global campaign to reform agricultural practices. Central to Howard's project was the mycorrhizal association, a symbiotic relationship between plant roots and subterranean fungi, believed to play an important part in plant nutrition. I show that there are a number of close parallels between Howard's work in India and his portrayal of the mycorrhizal association, and argue that Howard used these fungi to naturalise his imperial project. Understood in this way, these mycorrhizal and imperial associations reveal ways that Howard was able to negotiate the boundaries between the local and global, England and India, science and agriculture, institute and village, and soil and plant. In contrast to Thomas Gieryn's work on hybridisation at the cultural boundaries between science and non-science, I concentrate on Howard's use of intermediaries to negotiate and articulate specific boundaries within his imperial project. Arguing that this approach reveals limitations in Gieryn's hybrid framework, I suggest that a focus on Howard's dependence on intermediaries draws attention to the discontinuities between entities, besides the dynamic ways that they might be coupled. Copyright © 2011 Elsevier Ltd. All rights reserved.
, testing, and commissioning of electrical infrastructure, facilities, and equipment. Education M.S ., Electrical Engineering, University of Arizona B.S., Electrical Engineering, University of Arizona
: Institute of Electrical and Electronics Engineers (IEEE). NREL/CP-5500-54165. doi:10.1109/EnergyTech 2011. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE). NREL/CP-5500-53565. doi Electrical and Electronics Engineers (IEEE). NREL/CP-550-47061. doi:10.1109/pes.2009.5275358 Mooney, D., M
An Undergraduate Electrical Engineering Course on Computer Organization.
ERIC Educational Resources Information Center
Commission on Engineering Education, Washington, DC.
Outlined is an undergraduate electrical engineering course on computer organization designed to meet the need for electrical engineers familiar with digital system design. The program includes both hardware and software aspects of digital systems essential to design function and correlates design and organizational aspects of the subject. The…
Investigating Student Motivation and Performance in Electrical Engineering and Its Subdisciplines
ERIC Educational Resources Information Center
Foley, Justin M.; Daly, Shanna; Lenaway, Catherine; Phillips, Jamie
2016-01-01
Factors influencing choice of major in electrical engineering and later curricular and professional choices are investigated. Studies include both quantitative and qualitative analyses via student transcripts, surveys, and focus groups. Student motivation for choosing an electrical engineering major and later subdiscipline in the field is…
Code of Federal Regulations, 2010 CFR
2010-01-01
... scope and procedures given in Test Method B of Institute of Electrical and Electronics Engineers (IEEE... the Institute of Electrical and Electronics Engineers, Inc. NEMA means the National Electrical...
Ghasemi-Mobarakeh, Laleh; Prabhakaran, Molamma P; Morshed, Mohammad; Nasr-Esfahani, Mohammad Hossein; Baharvand, Hossein; Kiani, Sahar; Al-Deyab, Salem S; Ramakrishna, Seeram
2011-04-01
Among the numerous attempts to integrate tissue engineering concepts into strategies to repair nearly all parts of the body, neuronal repair stands out. This is partially due to the complexity of the nervous anatomical system, its functioning and the inefficiency of conventional repair approaches, which are based on single components of either biomaterials or cells alone. Electrical stimulation has been shown to enhance the nerve regeneration process and this consequently makes the use of electrically conductive polymers very attractive for the construction of scaffolds for nerve tissue engineering. In this review, by taking into consideration the electrical properties of nerve cells and the effect of electrical stimulation on nerve cells, we discuss the most commonly utilized conductive polymers, polypyrrole (PPy) and polyaniline (PANI), along with their design and modifications, thus making them suitable scaffolds for nerve tissue engineering. Other electrospun, composite, conductive scaffolds, such as PANI/gelatin and PPy/poly(ε-caprolactone), with or without electrical stimulation, are also discussed. Different procedures of electrical stimulation which have been used in tissue engineering, with examples on their specific applications in tissue engineering, are also discussed. Copyright © 2011 John Wiley & Sons, Ltd.
NASA Researcher Adjusts a Travelling Magnetic Wave Plasma Engine
1964-02-21
Raymond Palmer, of the Electromagnetic Propulsion Division’s Plasma Flow Section, adjusts the traveling magnetic wave plasma engine being operated in the Electric Power Conversion at the National Aeronautics and Space Administration (NASA) Lewis Research Center. During the 1960s Lewis researchers were exploring several different methods of creating electric propulsion systems, including the traveling magnetic wave plasma engine. The device operated similarly to alternating-current motors, except that a gas, not a solid, was used to conduct the electricity. A magnetic wave induced a current as it passed through the plasma. The current and magnetic field pushed the plasma in one direction. Palmer and colleague Robert Jones explored a variety of engine configurations in the Electric Propulsion Research Building. The engine is seen here mounted externally on the facility’s 5-foot diameter and 16-foot long vacuum tank. The four magnetic coils are seen on the left end of the engine. The researchers conducted two-minute test runs with varying configurations and used of both argon and xenon as the propellant. The Electric Propulsion Research Building was built in 1942 as the Engine Propeller Research Building, often called the Prop House. It contained four test cells to study large reciprocating engines with their propellers. After World War II, the facility was modified to study turbojet engines. By the 1960s, the facility was modified again for electric propulsion research and given its current name.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-22
... professions including consultant economists, lawyers, and electrical engineers. The costs of engaging these... economist, lawyer, and electrical engineer according to Salary.com data. (See http://salary.com ). Public... electrical engineer according to Salary.com data, for the hours required in 18 CFR 35.37(a) for market power...
ERIC Educational Resources Information Center
Keltikangas, K.; Wallen, H.
2010-01-01
This paper investigates electrical engineers' perceptions on their education in Finland, with particular emphasis on the basic electromagnetic field theory courses and their applicability in working life, using two online surveys (n = 99 and n = 120). The answers show a reasonably good satisfaction with the electrical engineering studies in…
76 FR 68634 - Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-07
... Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines AGENCY: Federal Aviation... ``(c) This AD applies to * * * and CF6-80A3 turbofan engines with left-hand links * * *.'' to ``(c) This AD applies to * * * and CF6-80A3 turbofan engines, including engines marked on the engine data...
Trajectories of Electrical Engineering and Computer Engineering Students by Race and Gender
ERIC Educational Resources Information Center
Lord, S. M.; Layton, R. A.; Ohland, M. W.
2011-01-01
Electrical engineering (EE) is one of the largest engineering disciplines. Computer engineering (CpE) has a similar curriculum, but different demographics and student outcomes. Using a dataset from universities in the U.S. that includes over 70,000 students who majored in engineering, this paper describes the outcomes for students matriculating in…
Collected Works of Mao Tse-Tung (1917-1949), Volume 3
1978-10-05
factories) are to be nationalized. Lend- lease contracts will be re- negotiated on some foreign business enterprises currently being allowed to operate...holds that all negotiations and agreements between them and imperialism are null and void. With regard to the Manchuria incident, we 39 propose the...all negotiations and secret treaties between the Kuomintang and imperialism! Overthrow the counterrevolutionary rule of the Kuomintang! Down with
46 CFR 107.305 - Plans and information.
Code of Federal Regulations, 2013 CFR
2013-10-01
... systems. Marine Engineering (z) Plans required for marine engineering equipment and systems by Subchapter F of this chapter. Electrical Engineering (aa) Plans required for electrical engineering equipment... materials that do not conform to ABS or ASTM specifications, complete specifications, including chemical and...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-23
... Engineering, Architectural Services, Design Policies and Construction Standards AGENCY: Rural Utilities..., engineering services and architectural services for transactions above the established threshold dollar levels... Code of Federal Regulations as follows: PART 1724--ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND...
Engineer Examines Cluster of Ion Engines in the Electric Propulsion Laboratory
1963-01-21
New staff member Paul Margosian inspects a cluster of ion engines in the Electric Propulsion Laboratory’s 25-foot diameter vacuum tank at the National Aeronautics and Space Administration (NASA) Lewis Research Center. Lewis researchers had been studying different methods of electric rocket propulsion since the mid-1950s. Harold Kaufman created the first successful engine, the electron bombardment ion engine, in the early 1960s. These engines used electric power to create and accelerate small particles of propellant material to high exhaust velocities. Electric engines have a very small thrust, and but can operate for long periods of time. The ion engines are often clustered together to provide higher levels of thrust. The Electric Propulsion Laboratory contained two large vacuum tanks capable of simulating the space environment. The tanks were designed especially for testing ion and plasma thrusters and spacecraft. The larger 25-foot diameter tank was intended for testing electric thrusters with condensable propellants. The tank’s test compartment, seen here, was 10 feet in diameter. Margosian joined Lewis in late 1962 during a major NASA hiring phase. The Agency reorganized in 1961 and began expanding its ranks through a massive recruiting effort. Lewis personnel increased from approximately 2,700 in 1961 to over 4,800 in 1966. Margosian, who worked with Bill Kerslake in the Electromagnetic Propulsion Division’s Propulsion Systems Section, wrote eight technical reports on mercury and electron bombardment thrusters, thermoelectrostatic generators, and a high voltage insulator.
Interior of Vacuum Tank at the Electric Propulsion Laboratory
1961-08-21
Interior of the 20-foot diameter vacuum tank at the NASA Lewis Research Center’s Electric Propulsion Laboratory. Lewis researchers had been studying different electric rocket propulsion methods since the mid-1950s. Harold Kaufman created the first successful ion engine, the electron bombardment ion engine, in the early 1960s. These engines used electric power to create and accelerate small particles of propellant material to high exhaust velocities. Electric engines have a very small thrust, but can operate for long periods of time. The ion engines are often clustered together to provide higher levels of thrust. The Electric Propulsion Laboratory, which began operation in 1961, contained two large vacuum tanks capable of simulating a space environment. The tanks were designed especially for testing ion and plasma thrusters and spacecraft. The larger 25-foot diameter tank included a 10-foot diameter test compartment to test electric thrusters with condensable propellants. The portals along the chamber floor lead to the massive exhauster equipment that pumped out the air to simulate the low pressures found in space.
Engine-start Control Strategy of P2 Parallel Hybrid Electric Vehicle
NASA Astrophysics Data System (ADS)
Xiangyang, Xu; Siqi, Zhao; Peng, Dong
2017-12-01
A smooth and fast engine-start process is important to parallel hybrid electric vehicles with an electric motor mounted in front of the transmission. However, there are some challenges during the engine-start control. Firstly, the electric motor must simultaneously provide a stable driving torque to ensure the drivability and a compensative torque to drag the engine before ignition. Secondly, engine-start time is a trade-off control objective because both fast start and smooth start have to be considered. To solve these problems, this paper first analyzed the resistance of the engine start process, and established a physic model in MATLAB/Simulink. Then a model-based coordinated control strategy among engine, motor and clutch was developed. Two basic control strategy during fast start and smooth start process were studied. Simulation results showed that the control objectives were realized by applying given control strategies, which can meet different requirement from the driver.
Recent advances in rechargeable battery materials: a chemist's perspective.
Palacín, M Rosa
2009-09-01
The constant increase in global energy demand, together with the awareness of the finite supply of fossil fuels, has brought about an imperious need to take advantage of renewable energy sources. At the same time, concern over CO(2) emissions and future rises in the cost of gasoline has boosted technological efforts to make hybrid and electric vehicles available to the general public. Energy storage is a vital issue to be addressed within this scenario, and batteries are certainly a key player. In this tutorial review, the most recent and significant scientific advances in the field of rechargeable batteries, whose performance is dependent on their underlying chemistry, are covered. In view of its utmost current significance and future prospects, special emphasis is given to progress in lithium-based technologies.
NASA Astrophysics Data System (ADS)
1995-05-01
English abstracts contained are from papers authored by the research staff of the Research Institute of Electrical Communication and the departments of Electrical Engineering, Electrical Communications, Electronic Engineering, and Information Engineering, Tohoku University, which originally appeared in scientific journals in 1994. The abstracts are organized under the following disciplines: electromagnetic theory; physics; fundamental theory of information; communication theory and systems; signal and image processing; systems control; computers; artificial intelligence; recording; acoustics and speech; ultrasonic electronics; antenna, propagation, and transmission; optoelectronics and optical communications; quantum electronics; superconducting materials and applications; magnetic materials and magnetics; semiconductors; electronic materials and parts; electronic devices and integrated circuits; electronic circuits; medical electronics and bionics; measurements and applied electronics; electric power; and miscellaneous.
electric motor provides additional power when needed, such as for accelerating and passing. This allows a at an intersection. Electric Motor: The electric motor assists the gasoline engine when additional braking into electricity and stores it in the battery. It also starts the gasoline engine instantly when
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2014 CFR
2014-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2010 CFR
2010-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2012 CFR
2012-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2013 CFR
2013-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2011 CFR
2011-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
46 CFR 129.560 - Engine-order telegraphs.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Engine-order telegraphs. 129.560 Section 129.560 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Miscellaneous Electrical Systems § 129.560 Engine-order telegraphs. No OSV need carry an engine...
46 CFR 129.560 - Engine-order telegraphs.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Engine-order telegraphs. 129.560 Section 129.560 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Miscellaneous Electrical Systems § 129.560 Engine-order telegraphs. No OSV need carry an engine...
46 CFR 129.560 - Engine-order telegraphs.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Engine-order telegraphs. 129.560 Section 129.560 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Miscellaneous Electrical Systems § 129.560 Engine-order telegraphs. No OSV need carry an engine...
46 CFR 129.560 - Engine-order telegraphs.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Engine-order telegraphs. 129.560 Section 129.560 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Miscellaneous Electrical Systems § 129.560 Engine-order telegraphs. No OSV need carry an engine...
Fault Identification Based on Nlpca in Complex Electrical Engineering
NASA Astrophysics Data System (ADS)
Zhang, Yagang; Wang, Zengping; Zhang, Jinfang
2012-07-01
The fault is inevitable in any complex systems engineering. Electric power system is essentially a typically nonlinear system. It is also one of the most complex artificial systems in this world. In our researches, based on the real-time measurements of phasor measurement unit, under the influence of white Gaussian noise (suppose the standard deviation is 0.01, and the mean error is 0), we used mainly nonlinear principal component analysis theory (NLPCA) to resolve fault identification problem in complex electrical engineering. The simulation results show that the fault in complex electrical engineering is usually corresponding to the variable with the maximum absolute value coefficient in the first principal component. These researches will have significant theoretical value and engineering practical significance.
14 CFR 25.1165 - Engine ignition systems.
Code of Federal Regulations, 2013 CFR
2013-01-01
... automatically available as an alternate source of electrical energy to allow continued engine operation if any... that draw electrical energy from the same source. (c) The design of the engine ignition system must...
14 CFR 25.1165 - Engine ignition systems.
Code of Federal Regulations, 2012 CFR
2012-01-01
... automatically available as an alternate source of electrical energy to allow continued engine operation if any... that draw electrical energy from the same source. (c) The design of the engine ignition system must...
In America’s Wake: A Comparison of Rising Power Foreign Policies
2016-06-01
judgments or pronouncements as to the propriety or impropriety of any particular course of action. The author is unconvinced that ex post facto ...Expansion, 3rd ed, Cambridge Imperial and Post -Colonial Studies Series (Houndmills, Basingstoke, Hampshire ; New York: Palgrave/Macmillan, 2002), 14...Century, 1815-1914: A Study of Empire and Expansion, 3rd ed, Cambridge Imperial and Post -Colonial Studies Series (Houndmills, Basingstoke, Hampshire
Thornstein Veblen as an Economic Theorist
1975-02-01
the Industrial Revolution . The book is indeed an examination of the interaction between politics and economics in imperial Germany but it is based...on certain propositions set forth fairly explicitly. 8 The Theory of Business Enterprise, p. 266, T. Veblen, Imperial Germany and the Industrial ... Revolution . McMillan, 1915; new edition. New York: Viking, 1939. New York; - 14 - Perhaps the most interesting of these is the idea that a country
Translations on Eastern Europe Political, Sociological, and Military Affairs No. 1355
1977-02-17
nationalism," concealing the chauvinism and imperiousness of a great power such as Soviet social-imperialism is—under these circumstances it...housing will continue to improve their situation.) An even more significant development took place in the hiring of employable Gypsy males . Before the...only with children coming to school from more closed communities speaking the Gypsy language." Erno Javor, a teacher here, adds that the children
The French Defense and Foreign Policies: Rwanda Case Study
2013-03-25
Charbonneau , Bruno. France and the New Imperialism: Security Policy in Sub-Saharan Africa. Aldershot: Ashgate, 2008. Chipman, John. French Power in Africa... Charbonneau , France and the New Imperialism: Security Policy in Sub-Saharan Africa. (Aldershot: Ashgate Publishing Limited, 2008), 125. 16 Le Monde, 1...Petitville, 583-585. 23 Charbonneau , 61-62. 24 Intentionally, the author does not use the American designation as Chairman of the Joint Chiefs of Staff due
Nationalism, Mass Politics, and Sport: Cold War Case Studies at Seven Degrees
2008-06-01
20 2. The Age of Imperialism.....................................................................23 3. The Twentieth Century...1896 games in the era of nationalism in the age of imperialism has remained an important feature of sports and politics since then. After World War...a horrible, dismal place. A world in which justice does not exist for large groups of people for no other reason than the color of their skin or
Between universalism and regionalism: universal systematics from imperial Japan.
Lee, Jung
2015-12-01
Historiographic discussions of the universality and regionality of science have to date focused on European cases for making regional science universal. This paper presents a new perspective by moving beyond European origins and illuminating a non-European scientist's engagement with the universality and regionality of science. It will examine the case of the Japanese botanist Nakai Takenoshin (1882-1952), an internationally recognized authority on Korean flora based at Tokyo Imperial University. Serving on the International Committee on Botanical Nomenclature in 1926, Nakai endorsed and acted upon European claims of universal science, whilst simultaneously unsettling them with his regionally shaped systematics. Eventually he came to promote his own systematics, built regionally on Korean flora, as the new universal. By analysing his shifting claims in relation to those of other European and non-European botanists, this paper makes two arguments. First, universalism and regionalism were not contradictory foundations of scientific practice but useful tools used by this non-European botanist in maintaining his scientific authority as a representative Japanese systematist. Second, his claims to universality and regionalism were both imperially charged. An imperially monopolized study of Korean plants left a regional imprint on Nakai's systematics. In order to maintain his scientific authority beyond its region of origin he had to assert either the expanding regionalism of 'East Asia' or universalism.
Study on the property of the production for Fengdongyan kiln in Early Ming dynasty by INAA and EDXRF
NASA Astrophysics Data System (ADS)
Li, L.; Huang, Y.; Sun, H. Y.; Yan, L. T.; Feng, S. L.; Xu, Q.; Feng, X. Q.
2016-08-01
A lot of official wares carved "Guan" or the dragon patterns were excavated on the strata of Ming dynasty of the Fengdongyan kiln site at Dayao County. The imperial porcelain was fired in Hongwu and Yongle eras. However, the emergence of this imperial porcelain has triggered academic debate about the property of Fengdongyan kiln in the Early Ming dynasty. Based on the differences of the official kiln management, some scholars have determined that the property of the production for this kiln was the civilian kiln. According to the historical textural records and typology, others preliminary confirmed that Fengdongyan kiln was the official kiln. In this paper, the elemental compositions of body and glaze in imperial and civilian porcelain are study by INAA and EDXRF for determining the property of the production for this kiln in Early Ming dynasty. After the processing of experimental data by geochemical analysis and principal component analysis, the result show that the raw materials for making body and glaze in imperial porcelain are similar with those of the civilian porcelain and the degrees of elutriation for body can be slightly different in HW-M period of Ming dynasty. The analytical results support the view that the Fengdongyan kiln is civilian not official.
Hydrology and empire: the Nile, water imperialism and the partition of Africa.
Tvedt, Terje
2011-01-01
Why did the British march up the Nile in the 1890s? The answers to this crucial question of imperial historiography have direct relevance for narratives and theories about imperialism, in general, and the partition of Africa in the nineteenth century, in particular. They will also influence our understanding of some of the main issues in the modern history of the whole region, including state developments and resource utilisation. This article presents an alternative to dominant interpretations of the partition of Africa and the role of British Nile policies in this context. It differs from mainstream diplomatic history, which dominates this research field, in its emphasis on how geographical factors and the hydrological characteristics of the Nile influenced and framed British thinking and actions in the region. Realising the importance of such factors and the specific character of the regional water system does not imply less attention to traditional diplomatic correspondence or to the role of individual imperial entrepreneurs. The strength of this analytical approach theoretically is that it makes it possible to locate the intentions and acts of historical subjects within specific geographical contexts. Empirically, it opens up a whole new set of source material, embedding the reconstruction of the British Nile discourse in a world of Nile plans, water works and hydrological discourses.
Optical legacy of Imperial College London
NASA Astrophysics Data System (ADS)
Kidger Webb-Moore, Tina E.
2016-10-01
The Industrial Revolution, beginning primarily in the UK, generated an increasing need for highly skilled technical people. Throughout the 19th century, technical instruction increased dramatically and the formation of schools specializing in science and technology grew quickly. In England, there was much motivation in favour of a national prestige center for science and technology centered in London. Central among the motivating forces was Queen Victoria's husband, Prince Albert. Although there were already existing specialist science and technology institutions in major English cities, the growth of superior institutions in other countries within Europe, especially Germany and the Charlottenburg area of Berlin (e.g., the Berlin Technical High School), encouraged important English dignitaries to become more competitive with continental Europe. As a result of this strong continental motivation, several science and technology institutions were built in the south Kensington part of London during the latter half of the 19th century. Imperial College, founded at the start of the 20th century, was a culmination and consolidation of several of these 19th century English institutions. Optical science and technology was an early beneficiary of the founding of Imperial College. This paper will attempt to provide the reader with an understanding of how great was the influence of the optical section of Imperial College in the further development of the world's optical science and technology.
46 CFR 112.50-5 - Electric starting.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...
46 CFR 112.50-5 - Electric starting.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...
46 CFR 112.50-5 - Electric starting.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...
Stationary diesel engines for use with generators to supply electric power
NASA Technical Reports Server (NTRS)
1977-01-01
The procurement of stationary diesel engines for on-site generation of electric power deals with technical criteria and policy relating to federal agency, not electrical components of diesel-generator sets or for the design of electric-power generating plants or their air-pollution or noise control equipment.
46 CFR 112.50-5 - Electric starting.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...
46 CFR 112.50-5 - Electric starting.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...
46 CFR 169.693 - Engine order telegraph systems.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Engine order telegraph systems. 169.693 Section 169.693... Machinery and Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.693 Engine order telegraph systems. An engine order telegraph system is not required. ...
14 CFR 23.1165 - Engine ignition systems.
Code of Federal Regulations, 2013 CFR
2013-01-01
... Controls and Accessories § 23.1165 Engine ignition systems. (a) Each battery ignition system must be... ignition. (e) Each turbine engine ignition system must be independent of any electrical circuit that is not... commuter category airplanes, each turbine engine ignition system must be an essential electrical load. [Doc...
46 CFR 169.693 - Engine order telegraph systems.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Engine order telegraph systems. 169.693 Section 169.693... Machinery and Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.693 Engine order telegraph systems. An engine order telegraph system is not required. ...
46 CFR 169.693 - Engine order telegraph systems.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Engine order telegraph systems. 169.693 Section 169.693... Machinery and Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.693 Engine order telegraph systems. An engine order telegraph system is not required. ...
46 CFR 169.693 - Engine order telegraph systems.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Engine order telegraph systems. 169.693 Section 169.693... Machinery and Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.693 Engine order telegraph systems. An engine order telegraph system is not required. ...
46 CFR 169.693 - Engine order telegraph systems.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Engine order telegraph systems. 169.693 Section 169.693... Machinery and Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.693 Engine order telegraph systems. An engine order telegraph system is not required. ...
A Novel Electro Conductive Graphene/Silicon-Dioxide Thermo-Electric Generator
NASA Astrophysics Data System (ADS)
Rahman, Ataur; Abdi, Yusuf
2017-03-01
Thermoelectric generators are all solid-state devices that convert heat energy into electrical energy. The total energy (fuel) supplied to the engine, approximately 30 to 40% is converted into useful mechanical work; whereas the remaining is expelled to the environment as heat through exhaust gases and cooling systems, resulting in serious green house gas (GHG) emission. By converting waste energy into electrical energy is the aim of this manuscript. The technologies reported on waste heat recovery from exhaust gas of internal combustion engines (ICE) are thermo electric generators (TEG) with finned type, Rankine cycle (RC) and Turbocharger. This paper has presented an electro-conductive graphene oxide/silicon-dioxide (GO-SiO2) composite sandwiched by phosphorus (P) and boron (B) doped silicon (Si) TEG to generate electricity from the IC engine exhaust heat. Air-cooling and liquid cooling techniques adopted conventional TEG module has been tested individually for the electricity generation from IC engine exhausts heat at engine speed of 1000-3000rpm. For the engine speed of 7000 rpm, the maximum voltage was recorded as 1.12V and 4.00V for the air-cooling and liquid cooling respectively. The GO-SiO2 simulated result shows that it’s electrical energy generation is about 80% more than conventional TEG for the exhaust temperature of 500°C. The GO-SiO2 composite TEG develops 524W to 1600W at engine speed 1000 to 5000 rpm, which could contribute to reduce the 10-12% of engine total fuel consumption and improve emission level by 20%.
Space electric power design study. [laser energy conversion
NASA Technical Reports Server (NTRS)
Martini, W. R.
1976-01-01
The conversion of laser energy to electrical energy is discussed. Heat engines in which the laser heats the gas inside the engine through a window as well as heat engines in which the gas is heated by a thermal energy storage reservoir which has been heated by laser radiation are both evaluated, as well as the necessary energy storage, transmission and conversion components needed for a full system. Preliminary system concepts are presented and a recommended development program is outlined. It appears possible that a free displacer Stirling engine operating directly a linear electric generator can convert 65% of the incident laser energy into electricity.
Electric machine for hybrid motor vehicle
Hsu, John Sheungchun
2007-09-18
A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.
1946-11-18
INVESTIGATION OF THE GENERAL ELECTRIC 1-40 JET -PROPULSION ENGINE IN THE CLEVELAND ALTITUDE WIND TUNNEL .; II - ANALYSIS OF COMPRESSOR PERFORMANCE...CHARACTERISTICS By Robert 0. Dietz, Jr. and Robert M. Gelsenheyner Aircraft Engine Research Laboratory 1 Cleveland, Ohio !f -NOT FM ED", P 0 W DESTROY...Command, Army Air Forces INVESTIGATION OF THE GENERAL ELECTRIC 1-40 JET -PROPULSION ENGINE IN THE CLEVELAND ALTITUDE WIND TUNNEL II - ANALYSIS OF
Code of Federal Regulations, 2010 CFR
2010-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Planning... long-term needs for plant additions, improvements, replacements, and retirements for their electric systems. The primary components of the planning system consist of long-range engineering plans and...
76 FR 64844 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-19
... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines with certain low-pressure turbine... series turbofan engines with certain LPT rotor stage 3 disks installed. That AD requires initial and...
40 CFR 1042.505 - Testing engines using discrete-mode or ramped-modal duty cycles.
Code of Federal Regulations, 2013 CFR
2013-07-01
... used with) controllable-pitch propellers or with electrically coupled propellers, unless these engines... engines that are used with (or intended to be used with) controllable-pitch propellers or with electrically coupled propellers. Use this duty cycle also for variable-speed propulsion marine engines that are...
40 CFR 1042.505 - Testing engines using discrete-mode or ramped-modal duty cycles.
Code of Federal Regulations, 2011 CFR
2011-07-01
... used with) controllable-pitch propellers or with electrically coupled propellers, unless these engines... engines that are used with (or intended to be used with) controllable-pitch propellers or with electrically coupled propellers. Use this duty cycle also for variable-speed propulsion marine engines that are...
40 CFR 1042.505 - Testing engines using discrete-mode or ramped-modal duty cycles.
Code of Federal Regulations, 2012 CFR
2012-07-01
... used with) controllable-pitch propellers or with electrically coupled propellers, unless these engines... engines that are used with (or intended to be used with) controllable-pitch propellers or with electrically coupled propellers. Use this duty cycle also for variable-speed propulsion marine engines that are...
46 CFR 91.55-5 - Plans and specifications required for new construction.
Code of Federal Regulations, 2010 CFR
2010-10-01
... systems. (e) Marine engineering. For plans required for marine engineering equipment and systems, see... electrical engineering, equipment and systems, see subchapter J (Electrical Engineering) of this chapter. (g... bottoms, etc., and including inboard and outboard profile. (b) Hull structure. 1 (1) *Inner Bottom Plating...
Heat engine generator control system
Rajashekara, K.; Gorti, B.V.; McMullen, S.R.; Raibert, R.J.
1998-05-12
An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power. 8 figs.
Heat engine generator control system
Rajashekara, Kaushik; Gorti, Bhanuprasad Venkata; McMullen, Steven Robert; Raibert, Robert Joseph
1998-01-01
An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power.
Latin America’s New Security Reality: Irregular Asymmetric Conflict and Hugo Chavez
2007-08-01
Bolivarian dream (the idea of a Latin American Liberation Movement against U.S. economic and political imperialism). Yet, most North Americans dismiss...imperialism of the North American “Colossus” (the United States). Chavez argues that liberation, New Socialism, and Bolivarianismo (the dream of a Latin...plan for gaining revolutionary power. In pursuit of this Bolivarian dream , Chavez has stirred the imaginations of many Latin Americans—especially the
Imperial Secrets. Remapping the Mind of Empire
2008-10-01
not to say vital, for many. What interest does the work hold in particular for historians, especially ancient his- torians? Imperial Secrets confronts...are always at an informa- tion defi cit.” Th e problem isn’t the dearth of information per se, but the failure to discern what elements of that...that the ancient Indian strategist Kautilya “argued that state power rests fundamentally upon near-omniscient state knowledge.” He then juxtaposes
The Rise of Totalitarianism and Its Influence on Educators and Intellectuals in Prewar Japan
2013-09-10
governmental manipulations at the Kyoto Imperial University in 1933, the year Japan seceded from the League of Nations. Japanese imperialistic fascism...Ichiro, The Emperor Organ Theory, Kyoto Imperial University , Fascism, Kokutai, The Communist Party, The Freedom and Civil Rights Movement, Minoda...already had begun to be reflected in Article 1 of the 1918 University Ordinance.2 An article entitled "Chishikijin no kokka ishiki" (The View of the
Imperial Valley's proposal to develop a guide for geothermal development within its county
NASA Technical Reports Server (NTRS)
Pierson, D. E.
1974-01-01
A plan to develop the geothermal resources of the Imperial Valley of California is presented. The plan consists of development policies and includes text and graphics setting forth the objectives, principles, standards, and proposals. The plan allows developers to know the goals of the surrounding community and provides a method for decision making to be used by county representatives. A summary impact statement for the geothermal development aspects is provided.
Schultheiss, Katrin
2010-05-01
This essay briefly examines some of the cross-cultural challenges that faced nurses in the Philippines, India, and South Africa in the context of 19th and 20th century imperialism. During this time, nurses from colonizing countries served as agents of empire by helping to establish and reinforce American and European control in colonized societies. In doing so, they sought to instill the racial and gender hierarchies of their home countries in the colonial territories. But once these women moved to the colonies, they frequently found their preconceptions about femininity, sexuality, and race challenged in unexpected ways. The history of nursing in the age of empire is a story of good intentions mixed with cultural chauvinism, of professional rigor mixed with condescension, of devotion and generosity shaped and often distorted by ideas of gendered and racial conventions, and of ambitious reform crushed by an inability to think beyond the bounds of imperialism.
Space Agriculture, Tourism and Health - Lessons from British Imperial History
NASA Astrophysics Data System (ADS)
Sivier, D. J.
Advocates of space commercialisation and colonisation have drawn on previous centuries' experience of the exploration and exploitation of terrestrial New Worlds. Although so far chiefly confined to the colonisation of the Americas and exploration of the Antarctic, a proper examination of the problems and solutions faced and found by the late 19th - early 20th century Jamaican tourist trade, mid-Victorian planter agriculturalists in Sri Lanka and the impact of climatic theories of health on early 20th century White colonists in Kenya and Rhodesia, can, if properly applied to today's conditions affecting modern space businesses, offer important insights to the psychological impact and aetiology of disease amongst future space colonists, and the success- ful establishment and management of tourism and agriculture in space. By following the precedents set by the imperial pioneers, it should be possible to apply their founding principles in these sectors successfully, while avoiding the pitfalls and excesses of terrestrial imperialism.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-23
... Airworthiness Directives; General Electric Company (GE) CJ610 Series Turbojet Engines and CF700 Series Turbofan... adopting a new airworthiness directive (AD) for GE CJ610 series turbojet engines and CF700 turbofan engines... part 39 with a proposed AD. The proposed AD applies to GE CJ610 series turbojet engines and CF700...
78 FR 44899 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-25
... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Electric Company (GE) GE90-110B1 and -115B turbofan engines. This proposed AD was prompted by multiple...) 2165M22P01, installed on GE90-110B1 and -115B turbofan engines. One of the leaks led to an under cowl engine...
Experimental Economics for Teaching the Functioning of Electricity Markets
ERIC Educational Resources Information Center
Guevara-Cedeno, J. Y.; Palma-Behnke, R.; Uribe, R.
2012-01-01
In the field of electricity markets, the development of training tools for engineers has been extremely useful. A novel experimental economics approach based on a computational Web platform of an electricity market is proposed here for the practical teaching of electrical engineering students. The approach is designed to diminish the gap that…
Hybrid Turbine Electric Vehicle
NASA Technical Reports Server (NTRS)
Viterna, Larry A.
1997-01-01
Hybrid electric power trains may revolutionize today's ground passenger vehicles by significantly improving fuel economy and decreasing emissions. The NASA Lewis Research Center is working with industry, universities, and Government to develop and demonstrate a hybrid electric vehicle. Our partners include Bowling Green State University, the Cleveland Regional Transit Authority, Lincoln Electric Motor Division, the State of Ohio's Department of Development, and Teledyne Ryan Aeronautical. The vehicle will be a heavy class urban transit bus offering double the fuel economy of today's buses and emissions that are reduced to 1/10th of the Environmental Protection Agency's standards. At the heart of the vehicle's drive train is a natural-gas-fueled engine. Initially, a small automotive engine will be tested as a baseline. This will be followed by the introduction of an advanced gas turbine developed from an aircraft jet engine. The engine turns a high-speed generator, producing electricity. Power from both the generator and an onboard energy storage system is then provided to a variable-speed electric motor attached to the rear drive axle. An intelligent power-control system determines the most efficient operation of the engine and energy storage system.
Development of instruction in hospital electrical safety for medical education.
Yoo, J H; Broderick, W A
1978-01-01
Although hospital electrical safety is receiving increased attention in the literature of engineers, it is not, at present, reflected in the curricula of medical schools. A possible reason for this omission is that biomedical and/or clinical engineers knowledgeable in electrical safety are not usually trained to teach. One remedy for this problem is to combine the knowledge of engineers with that of instructional developers to design a systematic curriculum for a course in hospital electrical safety. This paper describes such an effort at the University of Texas Health Science Center at San Antonio (UTHSCSA). A biomedical engineer and an instructional developer designed an instructional module in hospital electrical safety; the engineer taught the module, and both evaluated the results. The process and outcome of their collaboration are described. This model was effectively applied in the classroom as a four-hour segment in hospital electrical safety for first-year medical students at UTHSCSA. It is hoped that an additional benefit of this system will be that it offers an opportunity for continuing improvement in this kind of instruction at other medical schools and hospitals.
Active Reconfigurable Metamaterial Unit Cell Based on Non-Foster Elements
2013-10-01
Krois Ivan Bonic Aleksandar Kiricenko Damir Muha University of Zagreb Faculty of Electrical Engineering and Computing Unksa 3 Zagreb ...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) University of Zagreb Faculty of Electrical Engineering and Computing Unksa 3 Zagreb , HR-10000 CROATIA 8...Electrical Engineering and Computing University of Zagreb Unska 3 Zagreb , HR-10000, Croatia 14 October 2013 Distribution A: Approved for
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-18
... Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines AGENCY: Federal... airworthiness directive (AD) for General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines. That..., and MD-10- 30F. The commenter stated that the proposed AD only listed these airplanes as a series. We...
ERIC Educational Resources Information Center
Pierre, J. W.; Tuffner, F. K.; Anderson, J. R.; Whitman, D. L.; Ula, A. H. M. S.; Kubichek, R. F.; Wright, C. H. G.; Barrett, S. F.; Cupal, J. J.; Hamann, J. C.
2009-01-01
This paper describes a one-credit laboratory course for freshmen majoring in electrical and computer engineering (ECE). The course is motivational in nature and exposes the students to a wide range of areas of electrical and computer engineering. The authors believe it is important to give freshmen a broad perspective of what ECE is all about, and…
Injection Laser Structure Design.
1985-01-30
A. Linz and J. Butler Electrical Engineering Department Southern Methodist University Dallas, Texas 75275 Abstract A numerical method and the... NUMERICAL AND EFFECTIVE-INDEX METHODS FOR A CLASS OF DIELECTRIC WAVEGUIDES* H-.2 A. Linz and J.K. Butler Electrical Engineering Department Southern...University, Dallas, TX, where he is now Professor of Electrical methd w usd i notpraticl fr etensve odeingdue Engineering . His primary research areas are solid
Code of Federal Regulations, 2014 CFR
2014-10-01
... OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Electrical Engineering § 31.35-5... vessels are subject to the regulations contained in subchapter J (Electrical Engineering) of this chapter...
Code of Federal Regulations, 2010 CFR
2010-10-01
... OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Electrical Engineering § 31.35-5... vessels are subject to the regulations contained in subchapter J (Electrical Engineering) of this chapter...
Code of Federal Regulations, 2011 CFR
2011-10-01
... OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Electrical Engineering § 31.35-5... vessels are subject to the regulations contained in subchapter J (Electrical Engineering) of this chapter...
ERIC Educational Resources Information Center
Rieh, Hae-young
1993-01-01
Describes a study that investigated the citation patterns of publications by scientists and engineers in electrical and electronics engineering in Korea. Citation behavior of personnel in government, universities, and industry is compared; and citation patterns from articles in Korean and non-Korean publications are contrasted. (Contains 27…
battery, engine, and electric motor visible. The car is moving. There are red arrows flowing from the gasoline engine to the front wheels. There are blue arrows flowing from the gasoline engine to the electric car is moving. There are red arrows flowing from the gasoline engine to the front wheels. There are
Code of Ethics for Electrical Engineers
NASA Astrophysics Data System (ADS)
Matsuki, Junya
The Institute of Electrical Engineers of Japan (IEEJ) has established the rules of practice for its members recently, based on its code of ethics enacted in 1998. In this paper, first, the characteristics of the IEEJ 1998 ethical code are explained in detail compared to the other ethical codes for other fields of engineering. Secondly, the contents which shall be included in the modern code of ethics for electrical engineers are discussed. Thirdly, the newly-established rules of practice and the modified code of ethics are presented. Finally, results of questionnaires on the new ethical code and rules which were answered on May 23, 2007, by 51 electrical and electronic students of the University of Fukui are shown.
Dual motor drive vehicle speed synchronization and coordination control strategy
NASA Astrophysics Data System (ADS)
Huang, Hao; Tu, Qunzhang; Jiang, Chenming; Ma, Limin; Li, Pei; Zhang, Hongxing
2018-04-01
Multi-motor driven systems are more and more widely used in the field of electric engineering vehicles, as a result of the road conditions and the variable load of engineering vehicles, makes multi-motors synchronization coordinated control system as a key point of the development of the electric vehicle drive system. This paper based on electrical machinery transmission speed in the process of engineering vehicles headed for coordinated control problem, summarized control strategies at home and abroad in recent years, made analysis and comparison of the characteristics, finally discussed the trend of development of the multi-motor coordination control, provided a reference for synchronized control system research of electric drive engineering vehicles.
Experimental research made during a city cycle on the feasibility of electrically charged SI engines
NASA Astrophysics Data System (ADS)
Kocsis, Levente B.; Burnete, Nicolae
2014-06-01
The paper presents experimental research on performance improvements in a city cycle (operating mostly transient) of a compact class vehicle equipped with a turbocharged SI engine which had attached an electric charger, to improve engine response at low operational speeds. During tests, functional parameters, energy consumption of the electric charger and vehicle performances were measured while driving in two operating conditions: with active and inactive electric charger. The tests were carried out on a well-defined path, in the same driving style, by the same driver.
Assessing Performance in Shoulder Arthroscopy: The Imperial Global Arthroscopy Rating Scale (IGARS).
Bayona, Sofia; Akhtar, Kash; Gupte, Chinmay; Emery, Roger J H; Dodds, Alexander L; Bello, Fernando
2014-07-02
Surgical training is undergoing major changes with reduced resident work hours and an increasing focus on patient safety and surgical aptitude. The aim of this study was to create a valid, reliable method for an assessment of arthroscopic skills that is independent of time and place and is designed for both real and simulated settings. The validity of the scale was tested using a virtual reality shoulder arthroscopy simulator. The study consisted of two parts. In the first part, an Imperial Global Arthroscopy Rating Scale for assessing technical performance was developed using a Delphi method. Application of this scale required installing a dual-camera system to synchronously record the simulator screen and body movements of trainees to allow an assessment that is independent of time and place. The scale includes aspects such as efficient portal positioning, angles of instrument insertion, proficiency in handling the arthroscope and adequately manipulating the camera, and triangulation skills. In the second part of the study, a validation study was conducted. Two experienced arthroscopic surgeons, blinded to the identities and experience of the participants, each assessed forty-nine subjects performing three different tests using the Imperial Global Arthroscopy Rating Scale. Results were analyzed using two-way analysis of variance with measures of absolute agreement. The intraclass correlation coefficient was calculated for each test to assess inter-rater reliability. The scale demonstrated high internal consistency (Cronbach alpha, 0.918). The intraclass correlation coefficient demonstrated high agreement between the assessors: 0.91 (p < 0.001). Construct validity was evaluated using Kruskal-Wallis one-way analysis of variance (chi-square test, 29.826; p < 0.001), demonstrating that the Imperial Global Arthroscopy Rating Scale distinguishes significantly between subjects with different levels of experience utilizing a virtual reality simulator. The Imperial Global Arthroscopy Rating Scale has a high internal consistency and excellent inter-rater reliability and offers an approach for assessing technical performance in basic arthroscopy on a virtual reality simulator. The Imperial Global Arthroscopy Rating Scale provides detailed information on surgical skills. Although it requires further validation in the operating room, this scale, which is independent of time and place, offers a robust and reliable method for assessing arthroscopic technical skills. Copyright © 2014 by The Journal of Bone and Joint Surgery, Incorporated.
ESS++: a C++ objected-oriented algorithm for Bayesian stochastic search model exploration
Bottolo, Leonardo; Langley, Sarah R.; Petretto, Enrico; Tiret, Laurence; Tregouet, David; Richardson, Sylvia
2011-01-01
Summary: ESS++ is a C++ implementation of a fully Bayesian variable selection approach for single and multiple response linear regression. ESS++ works well both when the number of observations is larger than the number of predictors and in the ‘large p, small n’ case. In the current version, ESS++ can handle several hundred observations, thousands of predictors and a few responses simultaneously. The core engine of ESS++ for the selection of relevant predictors is based on Evolutionary Monte Carlo. Our implementation is open source, allowing community-based alterations and improvements. Availability: C++ source code and documentation including compilation instructions are available under GNU licence at http://bgx.org.uk/software/ESS.html. Contact: l.bottolo@imperial.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online. PMID:21233165
NASA Technical Reports Server (NTRS)
Shaltens, Richard K.
1989-01-01
Engines promise cost-effective solar-power generation. Report describes two concepts for Stirling-engine systems for conversion of solar heat to electrical energy. Recognized most promising technologies for meeting U.S. Department of Energy goals for performance and cost for terrestrial electrical-energy sources.
Micro- and Macroscale Ideas of Current among Upper-Division Electrical Engineering Students
ERIC Educational Resources Information Center
Adam, Gina C.; Harlow, Danielle B.; Lord, Susan M.; Kautz, Christian H.
2017-01-01
The concept of electric current is fundamental in the study of electrical engineering (EE). Students are often exposed to this concept in their daily lives and early in middle school education. Lower-division university courses are usually limited to the study of passive electronic devices and simple electric circuits. Semiconductor physics is an…
EMERGE: Engineered Materials that Create Environments for ReGeneration via Electric Field
2016-10-01
Recruitment of multiple cell lines by collagen-synthetic copolymer matrices in corneal regeneration ,” Biomaterials (2004). A) B) REDD-2016-537...AWARD NUMBER: W81XWH-14-1-0542 TITLE: EMERGE: Engineered Materials that Create Environments for ReGeneration via Electric Field PRINCIPAL...23 Sep 2016 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER EMERGE: Engineered Materials that Create Environments for ReGeneration via Electric Field
Sodium heat engine system: Space application
NASA Astrophysics Data System (ADS)
Betz, Bryan H.; Sungu, Sabri; Vu, Hung V.
1994-08-01
This paper explores the possibility of utilizing the Sodium Heat Engine (SHE) or known as AMTEC (Alkali Metal Thermoelectric Converter), for electrical power generation in ``near earth'' geosynchronous orbit. The Sodium Heat Engine principle is very flexible and adapts well to a variety of physical geometries. The proposed system can be easily folded and then deployed into orbit without the need for on site assembly in space. Electric power generated from SHE engine can be used in communication satellites, in space station, and other applications such as electrical recharging of vehicles in space is one of the applications the Sodium Heat Engine could be adapted to serve.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-07
...EPA is proposing to approve revisions to the Imperial County Air Pollution Control District (ICAPCD), Placer County Air Pollution Control District (PCAPCD) and Ventura County Air Pollution Control District (PCAPCD) portions of the California State Implementation Plan (SIP). Under authority of the Clean Air Act as amended in 1990 (CAA or the Act), we are proposing to approve local rules that address emission statements for ICAPCD and PCAPCD and definitions for VCAPCD.
Selfies of Imperial Cormorants (Phalacrocorax atriceps): What Is Happening Underwater?
Gómez-Laich, Agustina; Yoda, Ken; Zavalaga, Carlos; Quintana, Flavio
2015-01-01
During the last few years, the development of animal-borne still cameras and video recorders has enabled researchers to observe what a wild animal sees in the field. In the present study, we deployed miniaturized video recorders to investigate the underwater foraging behavior of Imperial cormorants (Phalacrocorax atriceps). Video footage was obtained from 12 animals and 49 dives comprising a total of 8.1 h of foraging data. Video information revealed that Imperial cormorants are almost exclusively benthic feeders. While foraging along the seafloor, animals did not necessarily keep their body horizontal but inclined it downwards. The head of the instrumented animal was always visible in the videos and in the majority of the dives it was moved constantly forward and backward by extending and contracting the neck while travelling on the seafloor. Animals detected prey at very short distances, performed quick capture attempts and spent the majority of their time on the seafloor searching for prey. Cormorants foraged at three different sea bottom habitats and the way in which they searched for food differed between habitats. Dives were frequently performed under low luminosity levels suggesting that cormorants would locate prey with other sensory systems in addition to sight. Our video data support the idea that Imperial cormorants’ efficient hunting involves the use of specialized foraging techniques to compensate for their poor underwater vision. PMID:26367384
Selfies of Imperial Cormorants (Phalacrocorax atriceps): What Is Happening Underwater?
Gómez-Laich, Agustina; Yoda, Ken; Zavalaga, Carlos; Quintana, Flavio
2015-01-01
During the last few years, the development of animal-borne still cameras and video recorders has enabled researchers to observe what a wild animal sees in the field. In the present study, we deployed miniaturized video recorders to investigate the underwater foraging behavior of Imperial cormorants (Phalacrocorax atriceps). Video footage was obtained from 12 animals and 49 dives comprising a total of 8.1 h of foraging data. Video information revealed that Imperial cormorants are almost exclusively benthic feeders. While foraging along the seafloor, animals did not necessarily keep their body horizontal but inclined it downwards. The head of the instrumented animal was always visible in the videos and in the majority of the dives it was moved constantly forward and backward by extending and contracting the neck while travelling on the seafloor. Animals detected prey at very short distances, performed quick capture attempts and spent the majority of their time on the seafloor searching for prey. Cormorants foraged at three different sea bottom habitats and the way in which they searched for food differed between habitats. Dives were frequently performed under low luminosity levels suggesting that cormorants would locate prey with other sensory systems in addition to sight. Our video data support the idea that Imperial cormorants' efficient hunting involves the use of specialized foraging techniques to compensate for their poor underwater vision.
[Erotic temperance: fortune and development of an Epicurean suggestion in the imperial Roman age].
Menghi, M
1999-01-01
The purpose of this writing is to follow the course of an idea, namely that of erotic temperance, which the Epicureans most proably derived as a corollary of their originary ethics. It was during the imperial Roman age that such an idea met a certain audience for different reasons, two of which at least cannot remain unnoticed. The first reason was the theoretical and clinic support given to this idea by such Epicurean oriented physicians as Rufus and Soranus, and by Areteus; the other one should have been the meeting of the notion of erotic temperance with such ethical principles as the moderation, the control of the passions, the impassibility of man towards life events, and a new vision the relationship between husband and wife, which entered into the pattern of the gentlemen's behaviour during the imperial age contributing to the starting of a new ethics. But, if erotic temperance represented on the one hand an ideal for the cultivated class of Roman imperial society, it was on the other perceived as a scrupulously observed realty by Germans, and as one of the principal reasons of their physical and mortal energy. Furthermore, the ideal of a severe erotic control of the early Christians offer precise evidence, will represent an important ground of agreement for theirs and contemporary pagan ethics.
Variable Temperature Scanning Tunneling Microscopy
1991-07-01
Tomazin, both Electrical Engineering. Build a digital integrator for the STM feedback loop: Kyle Drewry, Electrical Engineering. Write an AutoLisp ...program to automate the AutoCad design of UHV-STM chambers: Alfred Pierce (minority), Mechanical Engineering. Design a 32-bit interface board for the EISA
1986-03-01
Dietzmann L.R. Smith Engines, Emissions, and Vehicle Research Division Southwest Research Institute San Antonio, Texas Prepared for Belvoir Fuels and...replacing the currently used electric forklift with diesel engine-powered forklifts in handling hazardous materials. Electric -powered forklifts have no...diesel engines considered as potential candidates for forklift vehicles used to handle hazardous materials. The first program was conducted to
77 FR 58471 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-21
... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA.../P1, GEnx-1B75/P1, GEnx- 2B67, and GEnx-2B67B turbofan engines. This AD requires initial and... this AD will affect 11 GE GEnx turbofan engines installed on airplanes of U.S. registry. We also...
78 FR 19628 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-02
... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Electric Company (GE) GE90-76B, -85B, -90B, -94B, - 110B1, and -115B turbofan engines. This proposed AD was... of stage 1 HPT stator shroud distress resulting in engine removals on airplanes with GE90 turbofan...
Cost Effective Repair Techniques for Turbine Airfoils. Volume 2
1979-04-01
BLADES , *GUIDE VANES , *REPAIR, TURBOFAN ENGINES , DIFFUSION BONDING, COST EFFECTIVENESS Identifiers: (U) * Turbine vanes , TF-39 engines , Activated...REPAIR TECHNIQUES FOR TURBINE AIRFOILS J. A. WEIN W. R. YOUNG GENERAL ELECTRIC COMPANY AIRCRAFT ENGINE GROUP CINCINNATI, OHIO 45215 APRIL 1979...Author: GENERAL ELECTRIC CO CINCINNATI OH AIRCRAFT ENGINE BUSINESS GROUP Unclassified Title: (U) Cost Effective Repair Techniques for
ERIC Educational Resources Information Center
Lord, Susan M.; Layton, Richard A.; Ohland, Matthew W.
2015-01-01
Electrical Engineering (EE) and Computer Engineering (CpE) programs have similar curricula, but different demographics and student outcomes. This paper extends earlier longitudinal studies to a larger and more diverse dataset with 90,000 first-time-in-college and 26,000 transfer students who majored in engineering at USA institutions, including…
Carbon or graphite foam as a heating element and system thereof
Ott, Ronald D [Knoxville, TN; McMillan, April D [Knoxville, TN; Choudhury, Ashok [Oak Ridge, TN
2004-05-04
A temperature regulator includes at least one electrically conductive carbon foam element. The foam element includes at least two locations adapted for receiving electrical connectors thereto for heating a fluid, such as engine oil. A combustion engine includes an engine block and at least one carbon foam element, the foam element extending into the engine block or disposed in thermal contact with at least one engine fluid.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-20
... Frost, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New..., Massachusetts, on May 10, 2010. Peter A. White, Assistant Manager, Engine and Propeller Directorate, Aircraft... Airworthiness Directives; General Electric Company CF34-1A, -3A, -3A1, -3A2, -3B, and -3B1 Turbofan Engines...
Comparison of Stirling engines for use with a 25-kW disk-electric conversion system
NASA Technical Reports Server (NTRS)
Shaltens, Richard K.
1987-01-01
Heat engines were evaluated for terrestrial solar heat receivers. The Stirling Engine was identified as one of the most promising engines for terrestrial applications. The potential to meet the Department of Energy (DOE) goals for performance and cost can be met by the free-piston Stirling engine. NASA Lewis is providing technical management for an Advanced Stirling Conversion System (ASCS) through a cooperative interagency agreement with DOE. Parallel contracts were awarded for conceptual designs of an ASCS. Each design will feature a free-piston Stirling engine, a liquid-metal heat pipe receiver, and a means to provide about 25 kW of electric power to a utility grid while meeting long-term performance and goals. The Mechanical Technology, Ins. (MTI) design incorporates a linear alternator to directly convert the solar energy to electricity while the Stirling Technology Company (STC) generates electrical power indirectly by using a hydraulic output to a ground-bases hydraulic pump/motor coupled to a rotating alternator. Both designs use technology which can reasonably be expected to be available in the 1980's. The ASCS designs using a free-piston Stirling engine, a heat transport system, a receiver, and the methods of providing electricity to the utility grid will be discussed.
Parallel Hybrid Gas-Electric Geared Turbofan Engine Conceptual Design and Benefits Analysis
NASA Technical Reports Server (NTRS)
Lents, Charles; Hardin, Larry; Rheaume, Jonathan; Kohlman, Lee
2016-01-01
The conceptual design of a parallel gas-electric hybrid propulsion system for a conventional single aisle twin engine tube and wing vehicle has been developed. The study baseline vehicle and engine technology are discussed, followed by results of the hybrid propulsion system sizing and performance analysis. The weights analysis for the electric energy storage & conversion system and thermal management system is described. Finally, the potential system benefits are assessed.
Electric Vehicle Modeling and Simulation.
1983-08-01
RD-RI39 709 ELECTRIC VEHICLE MODELING RHD SIMULRTION(U) AIR FORCE lit INST OF TECH NRIGHT-PRTTERSON RFD OH SCHOOL OF ENGINEERING A R DEMISPELARE RUG...for Public Release Distribution Unlimited Fl School of Engineering Air Force Institute of Technology Wright-Patterson Air Force Base, Ohio Table of... Engineering , 49: 49-51 (27 August 1979). 36. Renner -Smith, S. "Battery-Saving Flywheel Gives Electric Car Freeway Zip," Popular Science, 215(10): 82-84
Solving Man-Induced Large-Scale Conservation Problems: The Spanish Imperial Eagle and Power Lines
López-López, Pascual; Ferrer, Miguel; Madero, Agustín; Casado, Eva; McGrady, Michael
2011-01-01
Background Man-induced mortality of birds caused by electrocution with poorly-designed pylons and power lines has been reported to be an important mortality factor that could become a major cause of population decline of one of the world rarest raptors, the Spanish imperial eagle (Aquila adalberti). Consequently it has resulted in an increasing awareness of this problem amongst land managers and the public at large, as well as increased research into the distribution of electrocution events and likely mitigation measures. Methodology/Principal Findings We provide information of how mitigation measures implemented on a regional level under the conservation program of the Spanish imperial eagle have resulted in a positive shift of demographic trends in Spain. A 35 years temporal data set (1974–2009) on mortality of Spanish imperial eagle was recorded, including population censuses, and data on electrocution and non-electrocution of birds. Additional information was obtained from 32 radio-tracked young eagles and specific field surveys. Data were divided into two periods, before and after the approval of a regional regulation of power line design in 1990 which established mandatory rules aimed at minimizing or eliminating the negative impacts of power lines facilities on avian populations. Our results show how population size and the average annual percentage of population change have increased between the two periods, whereas the number of electrocuted birds has been reduced in spite of the continuous growing of the wiring network. Conclusions Our results demonstrate that solving bird electrocution is an affordable problem if political interest is shown and financial investment is made. The combination of an adequate spatial planning with a sustainable development of human infrastructures will contribute positively to the conservation of the Spanish imperial eagle and may underpin population growth and range expansion, with positive side effects on other endangered species. PMID:21399692
Watts, Christina; Hefler, Marita; Freeman, Becky
2018-04-17
The tobacco industry has a long history of opposing tobacco control policy and promoting socially responsible business practices. With the rise of social media platforms, like Twitter, the tobacco industry is enabled to readily and easily communicate these messages. All tweets published by the primary corporate Twitter accounts of British American Tobacco (BAT), Imperial Brands PLC (Imperial), Philip Morris International (PMI) and Japan Tobacco International (JTI) were downloaded in May 2017 and manually coded under 30 topic categories. A total of 3301 tweets across the four accounts were analysed. Overall, the most prominent categories of tweets were topics that opposed or critiqued tobacco control policies (36.3% of BAT's tweets, 35.1% of Imperial's tweets, 34.0% of JTI's tweets and 9.6% of PMI's tweets). All companies consistently tweeted to promote an image of being socially and environmentally responsible. Tweets of this nature comprised 29.1% of PMI's tweets, 20.9% of JTI's tweets, 18.4% of Imperial's tweets and 18.4% of BAT's tweets. BAT, Imperial, JTI and PMI also frequently used Twitter to advertise career opportunities, highlight employee benefits, promote positive working environments and bring attention to awards and certifications that the company had received (11.6%, 11.1%, 19.3% and 45.7% of the total tweets published by each account, respectively). Transnational tobacco companies are using Twitter to oppose tobacco control policy and shape their public identity by promoting corporate social responsibility initiatives in violation of WHO Framework Convention on Tobacco Control. Regulation of the tobacco industry's global online activities is required. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
NASA Technical Reports Server (NTRS)
Johnson, Dexter; Brown, Gerald V.
2005-01-01
Future advanced aircraft fueled by hydrogen are being developed to use electric drive systems instead of gas turbine engines for propulsion. Current conventional electric motor power densities cannot match those of today s gas turbine aircraft engines. However, if significant technological advances could be made in high-power-density motor development, the benefits of an electric propulsion system, such as the reduction of harmful emissions, could be realized.
Ji, Renjie; Liu, Yonghong; Diao, Ruiqiang; Xu, Chenchen; Li, Xiaopeng; Cai, Baoping; Zhang, Yanzhen
2014-01-01
Engineering ceramics have been widely used in modern industry for their excellent physical and mechanical properties, and they are difficult to machine owing to their high hardness and brittleness. Electrical discharge machining (EDM) is the appropriate process for machining engineering ceramics provided they are electrically conducting. However, the electrical resistivity of the popular engineering ceramics is higher, and there has been no research on the relationship between the EDM parameters and the electrical resistivity of the engineering ceramics. This paper investigates the effects of the electrical resistivity and EDM parameters such as tool polarity, pulse interval, and electrode material, on the ZnO/Al2O3 ceramic's EDM performance, in terms of the material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR). The results show that the electrical resistivity and the EDM parameters have the great influence on the EDM performance. The ZnO/Al2O3 ceramic with the electrical resistivity up to 3410 Ω·cm can be effectively machined by EDM with the copper electrode, the negative tool polarity, and the shorter pulse interval. Under most machining conditions, the MRR increases, and the SR decreases with the decrease of electrical resistivity. Moreover, the tool polarity, and pulse interval affect the EWR, respectively, and the electrical resistivity and electrode material have a combined effect on the EWR. Furthermore, the EDM performance of ZnO/Al2O3 ceramic with the electrical resistivity higher than 687 Ω·cm is obviously different from that with the electrical resistivity lower than 687 Ω·cm, when the electrode material changes. The microstructure character analysis of the machined ZnO/Al2O3 ceramic surface shows that the ZnO/Al2O3 ceramic is removed by melting, evaporation and thermal spalling, and the material from the working fluid and the graphite electrode can transfer to the workpiece surface during electrical discharge machining ZnO/Al2O3 ceramic.
Electric converters of electromagnetic strike machine with battery power
NASA Astrophysics Data System (ADS)
Usanov, K. M.; Volgin, A. V.; Kargin, V. A.; Moiseev, A. P.; Chetverikov, E. A.
2018-03-01
At present, the application of pulse linear electromagnetic engines to drive strike machines for immersion of rod elements into the soil, strike drilling of shallow wells, dynamic probing of soils is recognized as quite effective. The pulse linear electromagnetic engine performs discrete consumption and conversion of electrical energy into mechanical work. Pulse dosing of a stream transmitted by the battery source to the pulse linear electromagnetic engine of the energy is provided by the electrical converter. The electric converters with the control of an electromagnetic strike machine as functions of time and armature movement, which form the unipolar supply pulses of voltage and current necessary for the normal operation of a pulse linear electromagnetic engine, are proposed. Electric converters are stable in operation, implement the necessary range of output parameters control determined by the technological process conditions, have noise immunity and automatic disconnection of power supply in emergency modes.
Liquefaction sites, Imperial Valley, California.
Youd, T.L.; Bennett, M.J.
1983-01-01
Sands that did and did not liquefy at two sites during the 1979 Imperial Valley, Calif., earthquake (ML = 6.6) are identified and their properties evaluated. SPT tests were used to evaluate liquefaction susceptibility. Loose fine sands in an abandoned channel liquefied and produced sand boils, ground fissures, and a lateral spread at the Heber Road sites. Evidence of liquefaction was not observed over moderately dense over-bank sand east of the channel nor over dense point-bar sand to the west. -from ASCE Publications Information
SOME NEW PROCESSING TECHNIQUES FOR THE IMPERIAL VALLEY 1979 AFTERSHOCKS.
Brady, A. Gerald; ,
1983-01-01
This paper describes some of the features of the latest processing improvements that the U. S. Geological Survey (USGS) is currently applying to strong-motion accelerograms from the national network of permanent stations. At the same time it introduces the application of this processing to the set of Imperial Valley aftershocks recorded following the main shock of October 15, 1979. Earlier processing of the 22 main shock recordings provided corrected accelerations, velocity and displacement, response spectra, and Fourier spectra.
Measuring ground movement in geothermal areas of Imperial Valley, California
NASA Technical Reports Server (NTRS)
Lofgren, B. E.
1974-01-01
Significant ground movement may accompany the extraction of large quantities of fluids from the subsurface. In Imperial Valley, California, one of the potential hazards of geothermal development is the threat of both subsidence and horizontal movement of the land surface. Regional and local survey nets are being monitored to detect and measure possible ground movement caused by future geothermal developments. Precise measurement of surface and subsurface changes will be required to differentiate man-induced changes from natural processes in this tectonically active region.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The feasibility of constructing a 25-50 MWe geothermal power plant using low salinity hydrothermal fluid as the energy source was assessed. Here, the geotechnical aspects of geothermal power generation and their relationship to environmental impacts in the Imperial Valley of California were investigated. Geology, geophysics, hydrogeology, seismicity and subsidence are discussed in terms of the availability of data, state-of-the-art analytical techniques, historical and technical background and interpretation of current data. Estimates of the impact of these geotechnical factors on the environment in the Imperial Valley, if geothermal development proceeds, are discussed.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-07
...EPA is taking direct final action to approve revisions to the Imperial County Air Pollution Control District (ICAPCD), Placer County Air Pollution Control District (PCAPCD) and Ventura County Air Pollution Control District (PCAPCD) portions of the California State Implementation Plan (SIP). Under authority of the Clean Air Act as amended in 1990 (CAA or the Act), we are approving local rules that address emission statements for ICAPCD and PCAPCD and definitions for VCAPCD.
Combined PIXE and XPS analysis on republican and imperial Roman coins
NASA Astrophysics Data System (ADS)
Daccà, A.; Prati, P.; Zucchiatti, A.; Lucarelli, F.; Mandò, P. A.; Gemme, G.; Parodi, R.; Pera, R.
2000-03-01
A combined PIXE and XPS analysis has been performed on a few Roman coins of the republican and imperial age. The purpose was to investigate via XPS the nature and extent of patina in order to be capable of extracting PIXE data relative to the coins bulk. The inclusion of elements from the surface layer, altered by oxidation and inclusion, is a known source of uncertainty in PIXE analyses of coins, performed to assess the composition and the provenance.
In-line stirling energy system
Backhaus, Scott N [Espanola, NM; Keolian, Robert [State College, PA
2011-03-22
A high efficiency generator is provided using a Stirling engine to amplify an acoustic wave by heating the gas in the engine in a forward mode. The engine is coupled to an alternator to convert heat input to the engine into electricity. A plurality of the engines and respective alternators can be coupled to operate in a timed sequence to produce multi-phase electricity without the need for conversion. The engine system may be operated in a reverse mode as a refrigerator/heat pump.
ERIC Educational Resources Information Center
BALABANIAN, NORMAN; LEPAGE, WILBUR R.
THIS INSTRUCTIONAL PROGRAM, A ONE-YEAR COURSE IN ELECTRICAL ENGINEERING SEEKS TO REMEDY LONG-STANDING INADEQUACIES IN AMERICAN ENGINEERING EDUCATION, WHICH HAVE EXISTED BECAUSE ENGINEERING TEACHERS' HAVE LACKED AWARENESS OF (1) INTRICACIES OF THE LEARNING PROCESS, AND (2) ADVANCES IN BEHAVIORAL SCIENCE RELATED TO THE EDUCATIONAL PROCESS. IN THE…
Main stage: See through car with battery, engine, generator, power split device, and electric motor the power split device to the front wheels. Main stage: See through car with battery, engine : See through car with battery, engine, generator, power split device, and electric motor visible while
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-30
..., Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England... Directives; General Electric Company (GE) CF34-1A, CF34-3A, and CF34-3B Series Turbofan Engines; Correction... to GE CF34-1A, CF34-3A, and CF34-3B series turbofan engines. The docket number is incorrect in all...
Thermoacoustic magnetohydrodynamic electrical generator
Wheatley, J.C.; Swift, G.W.; Migliori, A.
1984-11-16
A thermoacoustic magnetohydrodynamic electrical generator includes an intrinsically irreversible thermoacoustic heat engine coupled to a magnetohydrodynamic electrical generator. The heat engine includes an electrically conductive liquid metal as the working fluid and includes two heat exchange and thermoacoustic structure assemblies which drive the liquid in a push-pull arrangement to cause the liquid metal to oscillate at a resonant acoustic frequency on the order of 1000 Hz. The engine is positioned in the field of a magnet and is oriented such that the liquid metal oscillates in a direction orthogonal to the field of the magnet, whereby an alternating electrical potential is generated in the liquid metal. Low-loss, low-inductance electrical conductors electrically connected to opposite sides of the liquid metal conduct an output signal to a transformer adapted to convert the low-voltage, high-current output signal to a more usable higher voltage, lower current signal.
Thermoacoustic magnetohydrodynamic electrical generator
Wheatley, John C.; Swift, Gregory W.; Migliori, Albert
1986-01-01
A thermoacoustic magnetohydrodynamic electrical generator includes an intrinsically irreversible thermoacoustic heat engine coupled to a magnetohydrodynamic electrical generator. The heat engine includes an electrically conductive liquid metal as the working fluid and includes two heat exchange and thermoacoustic structure assemblies which drive the liquid in a push-pull arrangement to cause the liquid metal to oscillate at a resonant acoustic frequency on the order of 1,000 Hz. The engine is positioned in the field of a magnet and is oriented such that the liquid metal oscillates in a direction orthogonal to the field of the magnet, whereby an alternating electrical potential is generated in the liquid metal. Low-loss, low-inductance electrical conductors electrically connected to opposite sides of the liquid metal conduct an output signal to a transformer adapted to convert the low-voltage, high-current output signal to a more usable higher voltage, lower current signal.
Secondary electric power generation with minimum engine bleed
NASA Technical Reports Server (NTRS)
Tagge, G. E.
1983-01-01
Secondary electric power generation with minimum engine bleed is discussed. Present and future jet engine systems are compared. The role of auxiliary power units is evaluated. Details of secondary electric power generation systems with and without auxiliary power units are given. Advanced bleed systems are compared with minimum bleed systems. A cost model of ownership is given. The difference in the cost of ownership between a minimum bleed system and an advanced bleed system is given.
Code of Federal Regulations, 2010 CFR
2010-01-01
.../Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE) C2-1997, National Electrical Safety Code (NESC). The National Electrical Code ® and NEC ® are registered trademarks of the National Fire... have been made by the RUS borrower or the engineer delegated by the RUS borrower. (f) Only a qualified...
Code of Federal Regulations, 2012 CFR
2012-01-01
.../Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE) C2-1997, National Electrical Safety Code (NESC). The National Electrical Code ® and NEC ® are registered trademarks of the National Fire... have been made by the RUS borrower or the engineer delegated by the RUS borrower. (f) Only a qualified...
Code of Federal Regulations, 2011 CFR
2011-01-01
.../Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE) C2-1997, National Electrical Safety Code (NESC). The National Electrical Code ® and NEC ® are registered trademarks of the National Fire... have been made by the RUS borrower or the engineer delegated by the RUS borrower. (f) Only a qualified...
Code of Federal Regulations, 2013 CFR
2013-01-01
.../Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE) C2-1997, National Electrical Safety Code (NESC). The National Electrical Code ® and NEC ® are registered trademarks of the National Fire... have been made by the RUS borrower or the engineer delegated by the RUS borrower. (f) Only a qualified...
Code of Federal Regulations, 2014 CFR
2014-01-01
.../Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE) C2-1997, National Electrical Safety Code (NESC). The National Electrical Code ® and NEC ® are registered trademarks of the National Fire... have been made by the RUS borrower or the engineer delegated by the RUS borrower. (f) Only a qualified...
10 CFR 431.445 - Determination of small electric motor efficiency.
Code of Federal Regulations, 2011 CFR
2011-01-01
... COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.445 Determination of small... the mechanical and electrical characteristics of that basic model, and (ii) Based on engineering or... Department of Energy records showing the method or methods used; the mathematical model, the engineering or...
Microprocessors in U.S. Electrical Engineering Departments, 1974-1975.
ERIC Educational Resources Information Center
Sloan, M. E.
Drawn from a survey of engineering departments known to be teaching microprocessor courses, this paper shows that the adoption of microprocessors by Electrical Engineering Departments has been rapid compared with their adoption of minicomputers. The types of courses that are being taught can be categorized as: surveys of microprocessors, intensive…
ERIC Educational Resources Information Center
Ozogul, G.; Johnson, A. M.; Moreno, R.; Reisslein, M.
2012-01-01
Technological literacy education involves the teaching of basic engineering principles and problem solving, including elementary electrical circuit analysis, to non-engineering students. Learning materials on circuit analysis typically rely on equations and schematic diagrams, which are often unfamiliar to non-engineering students. The goal of…
Electric ants: A cross-disciplinary approach to understanding insect behavior
DOE Office of Scientific and Technical Information (OSTI.GOV)
Slowik, T.J.; Thorvilson, H.G.; Green, B.L.
1996-12-31
The response and attraction of the red imported fire ant, Solenopsis invicta, to electrical equipment was examined using an interdisciplinary approach. Entomologists specializing in fire ant behavior combined expertise with electrical engineers to investigate the economically damaging interaction of fire ants with electrical circuitry. Knowledge from the realms of physics, engineering, and biology were integrated in experimentation to test for a fire ant response to electric fields and magnetic fields associated with electrical equipment. It was determined that fire ants react to electrified conductive material and the alternating-current magnetic fields associated with electricity.
Local responses to French medical imperialism in late nineteenth-century Algeria.
Gallois, William
2007-08-01
This article offers the first account of the lives of Algerian-born doctors working in the French colonial medical service between 1870 and 1900. Their stories reveal the manner in which the idea of medical imperialism had collapsed in Algeria, as a result of maladministration, racial policies, competition between civil and military authorities, budgetary constraints and the rise of the colons. The article also indicates the way in which medicine became a locus of opposition to French rule. It shows how the first decades of the Third Republic were critical in terms of a shift from the earlier idea of medicine serving as an emblem of the mission civilisatrice to the ideological potential of medicine being seen in much more nuanced terms by both French settlers and Algerian locals. It is argued that the notion of cultural resistance to imperialism through medicine emerges in the 1870s and 1880s, thereby prefiguring the work of Fanon and the Front de Liberation Nationale's later analysis of the 'sickness' of colonial Algerian society.
Age-associated bone loss and intraskeletal variability in the Imperial Romans.
Cho, Helen; Stout, Sam Darrel
2011-01-01
An Imperial Roman sample from the Isola Sacra necropolis (100-300 A.D.) offered an opportunity to histologically examine bone loss and intraskeletal variability in an urban archaeological population. Rib and femur samples were analyzed for static indices of bone remodeling and measures of bone mass. The Imperial Romans experienced normal age-associated bone loss via increased intracortical porosity and endosteal expansion, with females exhibiting greater bone loss and bone turnover rates than in males. Life events such as menopause and lactation coupled with cultural attitudes and practices regarding gender and food may have led to increased bone loss in females. Remodeling dynamics differ between the rib and femur and the higher remodeling rates in the rib may be attributed to different effective age of the adult compacta or loading environment. This study demonstrates that combining multiple methodologies to examine bone loss is necessary to shed light on the biocultural factors that influence bone mass and bone loss.
Jenkins, Jill A.; Draugelis-Dale, Rassa O.
2006-01-01
The Sonny Bono Salton Sea National Wildlife Refuge (SSNWR) is located 64 km north of the Mexican border at the southern end of the Salton Sea in California's Imperial Valley. Freshwater ponds and managed habitats at the SSNWR, Calipatria, Calif. are supplied with Colorado River water that carries compounds from upstream sources. Components include municipal and industrial discharges, agricultural drainage, and sewage plant inputs. Aquatic animals in these ecosystems are continuously exposed to multiple constituents, several of which have been demonstrated to be associated with hormonal disturbances. We investigated possible endocrine impacts to fish in the Imperial Valley, Calif., by addressing the null hypothesis that aquatic species in impacted sites did not exhibit evidence of endocrine disruption as compared with those from nonimpacted sites. The results presented are intended to provide managers with science-based information and interpretations about the condition of the animals in their ecosystems for the minimization of potential adverse effects to trust fish and wildlife resources and for the maximization of available water resources.
Performance and driveline analyses of engine capacity in range extender engine hybrid vehicle
NASA Astrophysics Data System (ADS)
Praptijanto, Achmad; Santoso, Widodo Budi; Nur, Arifin; Wahono, Bambang; Putrasari, Yanuandri
2017-01-01
In this study, range extender engine designed should be able to meet the power needs of a power generator of hybrid electrical vehicle that has a minimum of 18 kW. Using this baseline model, the following range extenders will be compared between conventional SI piston engine (Baseline, BsL), engine capacity 1998 cm3, and efficiency-oriented SI piston with engine capacity 999 cm3 and 499 cm3 with 86 mm bore and stroke square gasoline engine in the performance, emission prediction of range extender engine, standard of charge by using engine and vehicle simulation software tools. In AVL Boost simulation software, range extender engine simulated from 1000 to 6000 rpm engine loads. The highest peak engine power brake reached up to 38 kW at 4500 rpm. On the other hand the highest torque achieved in 100 Nm at 3500 rpm. After that using AVL cruise simulation software, the model of range extended electric vehicle in series configuration with main components such as internal combustion engine, generator, electric motor, battery and the arthemis model rural road cycle was used to simulate the vehicle model. The simulation results show that engine with engine capacity 999 cm3 reported the economical performances of the engine and the emission and the control of engine cycle parameters.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Barringer, J.L.; Szabo, Z.; Barringer, T.H.
1998-09-01
Concentrations of arsenic exceed the New Jersey State Cleanup Criterion of 20 parts per million in sandy and clay-rich soils of two residential areas in the vicinity of the Imperial Oil Company Superfund site in Marlboro Township, Monmouth County, New Jersey. In order to determine the source of the arsenic and metals in soils in the two residential areas, soil samples were collected from (1) long-term forested areas, to determine background geologic and regional atmospheric inputs of arsenic and metals; (2) former and current orchards, to assess the range of concentrations of arsenic and metals that could be contributed bymore » past use of pesticides; (3) the Imperial Oil Company Superfund site, to characterize the chemical composition of contamination from activities at the site; (4) a wooded area adjacent to the Superfund site, to determine whether arsenic and metals from the Superfund site were evident; and (5) the two residential areas, to compare soil chemistry in these areas with the chemistry of soils from forests, orchards, and the Superfund site. The soil samples were divided by soil horizon and were analyzed for 23 metals and metalloids, total organic carbon, and total sulfur. Additionally, air-flow models were used to determine whether roasting of arsenic at the Imperial Oil Company Superfund site was a possible source of arsenic in the soils.« less
Hybrid vehicle motor alignment
Levin, Michael Benjamin
2001-07-03
A rotor of an electric motor for a motor vehicle is aligned to an axis of rotation for a crankshaft of an internal combustion engine having an internal combustion engine and an electric motor. A locator is provided on the crankshaft, a piloting tool is located radially by the first locator to the crankshaft. A stator of the electric motor is aligned to a second locator provided on the piloting tool. The stator is secured to the engine block. The rotor is aligned to the crankshaft and secured thereto.
1986-01-01
7 O-AI6 175 TWO- 1NENSION L SIGNAL PROCESSING AD STORAGE AND IA-1 ATLANTA SCHOOL OF ELECTRICAL ENGINEERING.. ULRSSIFIED R SCHAFER ET AL. SI JAN... ELECTRICAL ENGINEERING L’- ATLANTA, GEORGIA 30332 .’ -.. .. ~ i 4 2 i 2 " , I IT= J ., . 4 2.~ i1 ov--.,-w. A -A *- t . . . SECURITY CLASSIFICATION O0...School of Electrical Engineering Atlanta, Georgia 30332 Research Triangle Park, NC 27709 •e. NAME OP PUNOINGMSONSORING 0b. OPPIC SYMBOL L PROCUREMENT
The performance simulation of single cylinder electric power confined piston engine
NASA Astrophysics Data System (ADS)
Gou, Yanan
2017-04-01
A new type of power plant. i.e, Electric Power Confined Piston Engine, is invented by combining the free piston engine and the crank connecting rod mechanism of the traditional internal combustion engine. Directly using the reciprocating movement of the piston, this new engine converts the heat energy produced by fuel to electrical energy and output it. The paper expounds the working mechanism of ECPE and establishes the kinematics and dynamics equations. Furthermore, by using the analytic method, the ECPE electromagnetic force is solved at load cases. Finally, in the simulation environment of MARLAB, the universal characteristic curve is obtained in the condition of rotational speed n between 1000 r/min and 2400 r/min, throttle opening α between 30% and 100%.
A model for the development of university curricula in nanoelectronics
NASA Astrophysics Data System (ADS)
Bruun, E.; Nielsen, I.
2010-12-01
Nanotechnology is having an increasing impact on university curricula in electrical engineering and in physics. Major influencers affecting developments in university programmes related to nanoelectronics are discussed and a model for university programme development is described. The model takes into account that nanotechnology affects not only physics but also electrical engineering and computer engineering because of the advent of new nanoelectronics devices. The model suggests that curriculum development tends to follow one of three major tracks: physics; electrical engineering; computer engineering. Examples of European curricula following this framework are identified and described. These examples may serve as sources of inspiration for future developments and the model presented may provide guidelines for a systematic selection of topics in the university programmes.
Compact Hybrid Automotive Propulsion System
NASA Technical Reports Server (NTRS)
Lupo, G.
1986-01-01
Power train proposed for experimental vehicle powered by internal combustion engine and electric motor. Intended for front-wheel drive automobile, power train mass produced using existing technology. System includes internal-combustion engine, electric motor, continuously variable transmission, torque converter, differential, and control and adjustment systems for electric motor and transmission. Continuously variable transmission integrated into hydraulic system that also handles power steering and power brakes. Batteries for electric motor mounted elsewhere in vehicle.
ELECTRICAL TECHNIQUES FOR ENGINEERING APPLICATIONS.
Bisdorf, Robert J.
1985-01-01
Surface electrical geophysical methods have been used in such engineering applications as locating and delineating shallow gravel deposits, depth to bedrock, faults, clay zones, and other geological phenomena. Other engineering applications include determining water quality, tracing ground water contaminant plumes and locating dam seepages. Various methods and electrode arrays are employed to solve particular geological problems. The sensitivity of a particular method or electrode array depends upon the physics on which the method is based, the array geometry, the electrical contrast between the target and host materials, and the depth to the target. Each of the available electrical methods has its own particular advantages and applications which the paper discusses.
30 CFR 75.1719-2 - Lighting fixtures; requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... forth in the Institute of Electrical and Electronics Engineers, Inc. Standard No. 32 (IEEE Std. 32-1972... the Institute of Electrical and Electronics Engineers, Inc., Publications Office, 10662 Los Vaqueros...
30 CFR 75.1719-2 - Lighting fixtures; requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... forth in the Institute of Electrical and Electronics Engineers, Inc. Standard No. 32 (IEEE Std. 32-1972... the Institute of Electrical and Electronics Engineers, Inc., Publications Office, 10662 Los Vaqueros...
30 CFR 75.1719-2 - Lighting fixtures; requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... forth in the Institute of Electrical and Electronics Engineers, Inc. Standard No. 32 (IEEE Std. 32-1972... the Institute of Electrical and Electronics Engineers, Inc., Publications Office, 10662 Los Vaqueros...
30 CFR 75.1719-2 - Lighting fixtures; requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... forth in the Institute of Electrical and Electronics Engineers, Inc. Standard No. 32 (IEEE Std. 32-1972... the Institute of Electrical and Electronics Engineers, Inc., Publications Office, 10662 Los Vaqueros...
The current status of rehabilitation engineering
NASA Technical Reports Server (NTRS)
Reswick, J. B.
1974-01-01
Mechanical and electrical engineering devices for paralytic patient care are discussed as they are applied to medical problems. These include means of preventing bedsores, mobility aids, upper extremity orthoses, and electrical stimulation.
30 CFR 75.1719-2 - Lighting fixtures; requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... forth in the Institute of Electrical and Electronics Engineers, Inc. Standard No. 32 (IEEE Std. 32-1972... the Institute of Electrical and Electronics Engineers, Inc., Publications Office, 10662 Los Vaqueros...
ERIC Educational Resources Information Center
Burkett, Susan L.; Kotru, Sushma; Lusth, John C.; McCallum, Debra; Dunlap, Sarah
2014-01-01
Dunlap, The University of Alabama, USA ABSTRACT In the electrical and computer engineering (ECE) curriculum at The University of Alabama, freshmen are introduced to fundamental electrical concepts and units, DC circuit analysis techniques, operational amplifiers, circuit simulation, design, and professional ethics. The two credit course has both…
Alternative Fuels Data Center: Hybrid Electric Vehicles
alternative fuel in combination with an electric motor that uses energy stored in a battery. HEVs combine the combustion engine and an electric motor, which uses energy stored in batteries. The extra power provided by uses regenerative braking and the internal combustion engine to charge. The vehicle captures energy
Age and paleoenvironment of the imperial formation near San Gorgonio Pass, Southern California
McDougall, K.; Poore, R.Z.; Matti, J.
1999-01-01
Microfossiliferous marine sediments of the Imperial Formation exposed in the Whitewater and Cabazon areas, near San Gorgonio Pass, southern California, are late Miocene in age and were deposited at intertidal to outer neritic depths, and possibly upper bathyal depths. A late Miocene age of 7.4 to >6.04 Ma is based on the ranges of age-diagnostic benthic foraminifers (Cassidulina delicata and Uvigerina peregrina), planktic foraminifers (Globigerinoides obliquus, G. extremus, and Globigerina nepenthes; zones N17-N19), and calcareous nannoplankton (Discoaster brouweri, D. aff. D. surculus, Reticulofenestra pseudoumbilicata, Sphenolithus abies, and S. neoabies; zones CN9a-CN11) coupled with published K/Ar dates from the underlying Coachella Formation (10.1 ?? 1.2 Ma; Peterson, 1975) and overlying Painted Hill Formation (6.04 ?? 0.18 and 5.94 ?? 0.18 Ma; J. L. Morton in Matti and others, 1985 and Matti and Morton, 1993). Paleoecologic considerations (sea-level fluctuations and paleotemperature) restrict the age of the Imperial Formation to 6.5 through 6.3 Ma. Benthic foraminiferal assemblages indicate that the Imperial Formation in the Whitewater and Cabazon sections accumulated at inner neritic to outer neritic (0-152 m) and possibly upper bathyal (152-244 m) depths. Shallowing to inner neritic depths occurred as the upper part of the section was deposited. This sea-level fluctuation corresponds to a global highstand at 6.3 Ma (Haq and others, 1987). Planktic foraminifers suggest an increase in surface-water temperatures upsection. A similar increase in paleotemperatures is interpreted for the North Pacific from 6.5 to 6.3 Ma (warm interval W10 of Barron and Keller, 1983). Environmental contrasts between the Whitewater and Cabazon sections of the Imperial Formation provide evidence for right-lateral displacements on the Banning fault, a late Miocene strand of the San Andreas fault system. The Cabazon section lies south of the Banning fault, and has been displaced west relative to the Whitewater sections. The Cabazon section was deposited at greater depths, suggesting that it accumulated farther offshore than the Whitewater section. If the Salton Trough was a southward-opening, elongated northwest-southeast basin similar to the modern Gulf of California, the Cabazon sequence probably has been displaced right-laterally from a position farther southeast of the Whitewater sequence. This relation requires late Miocene displacements greater than the present 12 km cross-fault separation between the two Imperial sections in the San Gorgonio Pass area.
Energy Efficient Engine: Control system component performance report
NASA Technical Reports Server (NTRS)
Beitler, R. S.; Bennett, G. W.
1984-01-01
An Energy Efficient Engine (E3) program was established to develop technology for improving the energy efficiency of future commercial transport aircraft engines. As part of this program, General Electric designed and tested a new engine. The design, fabrication, bench and engine testing of the Full Authority Digital Electronic Control (FADEC) system used for controlling the E3 Demonstrator Engine is described. The system design was based on many of the proven concepts and component designs used on the General Electric family of engines. One significant difference is the use of the FADEC in place of hydromechanical computation currently used.
16 CFR 1101.32 - Reasonable steps to assure information is accurate.
Code of Federal Regulations, 2012 CFR
2012-01-01
..., an electrical engineer, or an attending physician) conducts an investigation or an inspection which... fire marshal, a fire investigator, an electrical engineer, an ambulance attendant, or an attending...
16 CFR 1101.32 - Reasonable steps to assure information is accurate.
Code of Federal Regulations, 2011 CFR
2011-01-01
..., an electrical engineer, or an attending physician) conducts an investigation or an inspection which... fire marshal, a fire investigator, an electrical engineer, an ambulance attendant, or an attending...
16 CFR 1101.32 - Reasonable steps to assure information is accurate.
Code of Federal Regulations, 2014 CFR
2014-01-01
..., an electrical engineer, or an attending physician) conducts an investigation or an inspection which... fire marshal, a fire investigator, an electrical engineer, an ambulance attendant, or an attending...
16 CFR 1101.32 - Reasonable steps to assure information is accurate.
Code of Federal Regulations, 2010 CFR
2010-01-01
..., an electrical engineer, or an attending physician) conducts an investigation or an inspection which... fire marshal, a fire investigator, an electrical engineer, an ambulance attendant, or an attending...
Building configuration and seismic design: The architecture of earthquake resistance
NASA Astrophysics Data System (ADS)
Arnold, C.; Reitherman, R.; Whitaker, D.
1981-05-01
The architecture of a building in relation to its ability to withstand earthquakes was determined. Aspects of round motion which are significant to building behavior are discussed. Results of a survey of configuration decisions that affect the performance of buildings with a focus on the architectural aspects of configuration design are provided. Configuration derivation, building type as it relates to seismic design, and seismic design, and seismic issues in the design process are examined. Case studies of the Veterans' Administration Hospital in Loma Linda, California, and the Imperial Hotel in Tokyo, Japan, are presented. The seismic design process is described paying special attention to the configuration issues. The need is stressed for guidelines, codes, and regulations to ensure design solutions that respect and balance the full range of architectural, engineering, and material influences on seismic hazards.
Embedding Academic Literacy Support within the Electrical Engineering Curriculum: A Case Study
ERIC Educational Resources Information Center
Skinner, I.; Mort, P.
2009-01-01
This paper reports the integration of supplementary training in academic literacy, for those without the assumed entry standard, into a standard electrical engineering program without compromising any other educational objectives. All students who commenced an engineering degree were tested as part of their first session's assessment activities.…
A Successful Experience of ABET Accreditation of an Electrical Engineering Program
ERIC Educational Resources Information Center
Al-Yahya, S. A.; Abdel-Halim, M. A.
2013-01-01
The procedures followed and the various factors that led to the ABET accreditation of the College of Engineering, Qassim University, Buraidah, Saudi Arabia, are illustrated and evaluated for the benefit of other similar colleges. Taking the Electrical Engineering (EE) program as an example, this paper describes the procedures followed to implement…
Project ITCH: Interactive Digital Simulation in Electrical Engineering Education.
ERIC Educational Resources Information Center
Bailey, F. N.; Kain, R. Y.
A two-stage project is investigating the educational potential of a low-cost time-sharing system used as a simulation tool in Electrical Engineering (EE) education. Phase I involves a pilot study and Phase II a full integration. The system employs interactive computer simulation to teach engineering concepts which are not well handled by…
Electrical Engineering | Classification | College of Engineering & Applied
) 229-6916bsra@uwm.eduEng & Math Sciences 995 profile photo Robert Cuzner, Ph.D.Assistant ChairDepartment Chair of Electrical Engineering(414) 229-3885george@uwm.eduEng & Math Sciences 1245 profile photo Hossein Hosseini, Ph.D.ProfessorComputer Science(414) 229-5184hosseini@uwm.eduEng & Math
77 FR 48110 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-13
... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... certain General Electric Company (GE) CF6-80C2 series turbofan engines. The existing AD requires... 2000-04-14, Amendment 39-11597 (65 FR 10698, February 29, 2000), for all GE CF6-80C2 series turbofan...
77 FR 76977 - Airworthiness Directives; General Electric Company Turbofan Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-31
... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Supplemental notice... proposed airworthiness directive (AD) for certain General Electric Company (GE) CF6-80C2 series turbofan... part 39 to include an AD that would apply to certain GE CF6-80C2 series turbofan engines. That NPRM...
University Policies under Varying Market Conditions: The Training of Electrical Engineers.
ERIC Educational Resources Information Center
Eckstein, Zvi; And Others
1988-01-01
Analyzes an Israeli university's problem in optimizing the quality and quantity of electrical engineers in response to fluctuating enrollment. An equilibrium model considers the effect of students' occupation choice and the university's decision on the current and future demand and supply of engineers, in order to predict the equilibrium number of…
Learning Platform for Study of Power Electronic Application in Power Systems
ERIC Educational Resources Information Center
Bauer, P.; Rompelman, O.
2005-01-01
Present engineering has to deal with increasingly complex systems. In particular, this is the case in electrical engineering. Though this is obvious in microelectronics, also in the field of power systems engineers have to design, operate and maintain highly complex systems such as power grids, energy converters and electrical drives. This is…
ERIC Educational Resources Information Center
Seabra, Antonio C.; Consonni, Denise
Brazilian engineering schools are under a strict program to reengineer their courses with the financial support of the federal agencies. At the electronic engineering department at the University of Sao Paulo, this process started by modifying the Basic Electricity and Electronic Laboratories. This paper describes the new structure of these labs…
accelerating or when additional power is needed, the gasoline engine and electric motor are both used to propel . The car is passing another vehicle. There are red arrows flowing from the gasoline engine to the front wheels. There are blue arrows flowing from the battery to the electric engine to the front wheels. Main
Anomalous heating and plasmoid formation in pulsed power driven magnetic reconnection experiments
NASA Astrophysics Data System (ADS)
Hare, Jack
2017-10-01
Magnetic reconnection is an important process occurring in various plasma environments, including high energy density plasmas. In this talk we will present results from a recently developed magnetic reconnection platform driven by the MAGPIE pulsed power generator (1 MA, 250 ns) at Imperial College London. In these experiments, supersonic, sub-Alfvénic plasma flows collide, bringing anti-parallel magnetic fields into contact and producing a well-defined, elongated reconnection layer. This layer is long-lasting (>200 ns, > 10 hydrodynamic flow times) and is diagnosed using a suite of high resolution, spatially and temporally resolved diagnostics which include laser interferometry, Thomson scattering and Faraday rotation imaging. We observe significant heating of the electrons and ions inside the reconnection layer, and calculate that the heating must occur on time-scales far faster than can be explained by classical mechanisms. Possible anomalous mechanisms include in-plane electric fields caused by two-fluid effects, and enhanced resistivity and viscosity caused by kinetic turbulence. We also observe the repeated formation of plasmoids in the reconnection layer, which are ejected outwards along the layer at super-Alfvénic velocities. The O-point magnetic field structure of these plasmoids is determined using in situ magnetic probes, and these plasmoids could also play a role in the anomalous heating of the electrons and ions. In addition, we present further modifications to this experimental platform which enable us to study asymmetric reconnection or measure the out-of-plane magnetic field inside the plasmoids. This work was supported in part by the Engineering and Physical Sciences Research Council (EPSRC) Grant No. EP/N013379/1, and by the U.S. Department of Energy (DOE) Awards No. DE-F03-02NA00057 and No. DE-SC-0001063.
Ito, Akira; Yamamoto, Yasunori; Sato, Masanori; Ikeda, Kazushi; Yamamoto, Masahiro; Fujita, Hideaki; Nagamori, Eiji; Kawabe, Yoshinori; Kamihira, Masamichi
2014-04-24
Electrical impulses are necessary for proper in vivo skeletal muscle development. To fabricate functional skeletal muscle tissues in vitro, recapitulation of the in vivo niche, including physical stimuli, is crucial. Here, we report a technique to engineer skeletal muscle tissues in vitro by electrical pulse stimulation (EPS). Electrically excitable tissue-engineered skeletal muscle constructs were stimulated with continuous electrical pulses of 0.3 V/mm amplitude, 4 ms width, and 1 Hz frequency, resulting in a 4.5-fold increase in force at day 14. In myogenic differentiation culture, the percentage of peak twitch force (%Pt) was determined as the load on the tissue constructs during the artificial exercise induced by continuous EPS. We optimized the stimulation protocol, wherein the tissues were first subjected to 24.5%Pt, which was increased to 50-60%Pt as the tissues developed. This technique may be a useful approach to fabricate tissue-engineered functional skeletal muscle constructs.
Innovative technologies in course Electrical engineering and electronics
NASA Astrophysics Data System (ADS)
Kuznetsov, E. V.; Kiselev, V. I.; Kulikova, E. A.
2017-11-01
Department of Electrical Engineering and Nondestructive Testing, NRU “MPEI”, has been working on development Electronic Learning Resources (ELRs) in course Electrical Engineering and Electronics for several years. This work have been focused on education intensification and effectiveness while training bachelors in nonelectrical specializations including students from Thermal and Atomic Power Engineering Institute. The developed ELRs are united in a tutorial module consisting of three parts (Electrical Circuits, Electrical Machines, Basics of Electronics): electronic textbook and workbook (ETW); virtual laboratory sessions (VLS); training sessions (ETS); personal tasks (PT); testing system that contains electronic tests in all course subjects and built-in verification of a student’s work results in ETW, VLS, ETS, PT. The report presents samples of different ELRs in html format and MathCAD, MatLAB Simulink applications, copyrighted programs in Java2, Delphi, VB6, C++. The report also contains the experience description, advantages and disadvantages of the new technologies. It is mentioned that ELRs provide new opportunities in course studying.
16 CFR § 1101.32 - Reasonable steps to assure information is accurate.
Code of Federal Regulations, 2013 CFR
2013-01-01
..., an electrical engineer, or an attending physician) conducts an investigation or an inspection which... fire marshal, a fire investigator, an electrical engineer, an ambulance attendant, or an attending...
Motivational project-based laboratory for a common first year electrical engineering course
NASA Astrophysics Data System (ADS)
Nedic, Zorica; Nafalski, Andrew; Machotka, Jan
2010-08-01
Over the past few years many universities worldwide have introduced a common first year for all engineering disciplines. This is despite the opinion of many academics that large classes have negative effects on the learning outcomes of first year students. The University of South Australia is also faced with low motivation amongst engineering students studying non-major courses. In 2006, a project-based laboratory was successfully introduced for first year students enrolled in electrical disciplines, which increased student satisfaction, reduced the attrition rate and improved students' success rate. This paper presents the experiences with the project-based laboratory's implementation in three different projects in the common first year course, Electrical and Energy Systems, where each project aims to increase the motivation of students in one of three disciplines: electrical, mechanical or civil engineering.
Electrical system for a motor vehicle
Tamor, Michael Alan
1999-01-01
In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor.
Electrical system for a motor vehicle
Tamor, M.A.
1999-07-20
In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor. 2 figs.
Ji, Renjie; Liu, Yonghong; Diao, Ruiqiang; Xu, Chenchen; Li, Xiaopeng; Cai, Baoping; Zhang, Yanzhen
2014-01-01
Engineering ceramics have been widely used in modern industry for their excellent physical and mechanical properties, and they are difficult to machine owing to their high hardness and brittleness. Electrical discharge machining (EDM) is the appropriate process for machining engineering ceramics provided they are electrically conducting. However, the electrical resistivity of the popular engineering ceramics is higher, and there has been no research on the relationship between the EDM parameters and the electrical resistivity of the engineering ceramics. This paper investigates the effects of the electrical resistivity and EDM parameters such as tool polarity, pulse interval, and electrode material, on the ZnO/Al2O3 ceramic's EDM performance, in terms of the material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR). The results show that the electrical resistivity and the EDM parameters have the great influence on the EDM performance. The ZnO/Al2O3 ceramic with the electrical resistivity up to 3410 Ω·cm can be effectively machined by EDM with the copper electrode, the negative tool polarity, and the shorter pulse interval. Under most machining conditions, the MRR increases, and the SR decreases with the decrease of electrical resistivity. Moreover, the tool polarity, and pulse interval affect the EWR, respectively, and the electrical resistivity and electrode material have a combined effect on the EWR. Furthermore, the EDM performance of ZnO/Al2O3 ceramic with the electrical resistivity higher than 687 Ω·cm is obviously different from that with the electrical resistivity lower than 687 Ω·cm, when the electrode material changes. The microstructure character analysis of the machined ZnO/Al2O3 ceramic surface shows that the ZnO/Al2O3 ceramic is removed by melting, evaporation and thermal spalling, and the material from the working fluid and the graphite electrode can transfer to the workpiece surface during electrical discharge machining ZnO/Al2O3 ceramic. PMID:25364912
Electrical stimulation: a novel tool for tissue engineering.
Balint, Richard; Cassidy, Nigel J; Cartmell, Sarah H
2013-02-01
New advances in tissue engineering are being made through the application of different types of electrical stimuli to influence cell proliferation and differentiation. Developments made in the last decade have allowed us to improve the structure and functionality of tissue-engineered products through the use of growth factors, hormones, drugs, physical stimuli, bioreactor use, and two-dimensional (2-D) and three-dimensional (3-D) artificial extracellular matrices (with various material properties and topography). Another potential type of stimulus is electricity, which is important in the physiology and development of the majority of all human tissues. Despite its great potential, its role in tissue regeneration and its ability to influence cell migration, orientation, proliferation, and differentiation has rarely been considered in tissue engineering. This review highlights the importance of endogenous electrical stimulation, gathering the current knowledge on its natural occurrence and role in vivo, discussing the novel methods of delivering this stimulus and examining its cellular and tissue level effects, while evaluating how the technique could benefit the tissue engineering discipline in the future.
MEMS CLOSED CHAMBER HEAT ENGINE AND ELECTRIC GENERATOR
NASA Technical Reports Server (NTRS)
Landis, Geoffrey A. (Inventor)
2005-01-01
A heat engine, preferably combined with an electric generator, and advantageously implemented using micro-electromechanical system (MEMS) technologies as an array of one or more individual heat engine/generators. The heat engine is based on a closed chamber containing a motive medium, preferably a gas; means for alternately enabling and disabling transfer of thermal energy from a heat source to the motive medium; and at least one movable side of the chamber that moves in response to thermally-induced expansion and contraction of the motive medium, thereby converting thermal energy to oscillating movement. The electrical generator is combined with the heat engine to utilize movement of the movable side to convert mechanical work to electrical energy, preferably using electrostatic interaction in a generator capacitor. Preferably at least one heat transfer side of the chamber is placed alternately into and out of contact with the heat source by a motion capacitor, thereby alternately enabling and disabling conductive transfer of heat to the motive medium.
Decision Models for Conducting an Economic Analysis of Alternative Fuels for the Ice Engine.
1983-03-01
p.cduc.d ICE vehicles. This analysis focusqs on electric vehicles d=.signed for commercial use. Electric hybrid vehicles which combine electric...ccntain -:he minimum gross veicle weight, engine size, and other characterist-ca of vehicles generally procured by the Federal governmen. The ir...Electric and Hybrid Vehicles, Energy Technology Review Nc. 44 published by Noyes Data Corpora’-ion. It summarizes data cn characteristics, cost, maints
A comparison of Stirling engines for use with a 25 kW dish-electric conversion system
NASA Technical Reports Server (NTRS)
Shaltens, Richard K.
1987-01-01
Two designs for an advanced Stirling conversion system (ASCS) are described. The objective of the ASCS is to generate about 25 kW of electric power to an electric utility grid at an engine/alternator target cost of $300.00/kW at the manufacturing rate of 10,000 unit/yr. Both designs contain a free-piston Stirling engine (FPSE), a heat transport system, solar receiver, a means to generate electric power, the necessary auxiliaries, and a control system. The major differences between the two concepts are: one uses a 25 kWe single-piston FPSE which incorporates a linear alternator to directly convert the energy to electricity on the utility grid; and in the second design, electrical power is generated indirectly using a hydraulic output to a ground based hydraulic motor coupled to a rotating alternator. Diagrams of the two designs are presented.
Bioethical concerns are global, bioethics is Western
Chattopadhyay, Subrata; De Vries, Raymond
2009-01-01
Modern bioethics was born in the West and thus reflects, not surprisingly, the traditions of Western moral philosophy and political and social theory. When the work of bioethics was confined to the West, this background of socio-political theory and moral tradition posed few problems, but as bioethics has moved into other cultures - inside and outside of the Western world - it has become an agent of moral imperialism. We describe the moral imperialism of bioethics, discuss its dangers, and suggest that global bioethics will succeed only to the extent that it is local. PMID:19593391
The Development of Astronomy and Emergence of Astrophysics in China
NASA Astrophysics Data System (ADS)
Ning, Xiaoyu; Sun, Xiaochun; Orchiston, Wayne; Nakamura, Tsuko
China had a long tradition of astronomy. But, like in other cultures, astronomy in ancient China was essentially positional. The study of the physical nature of celestial bodies has only been a recent development. Knowledge about astrophysics began to be transmitted to China in the middle of the nineteenth century by Western Christian missionaries. With the downfall of the Imperial Qing Dynasty and the founding of the Republic of China in 1912 astronomy began to be seen not as paraphernalia of Imperial rule but as a science with its focus on astrophysics.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-19
...EPA is proposing to clarify the description of the Imperial Valley planning area, an area designated as nonattainment for the national ambient air quality standard for particulate matter with an aerodynamic diameter of a nominal 10 microns or less (PM10). EPA is not proposing to change the boundaries of the PM10 area or the status of the area as a ``serious'' PM10 nonattainment area but is proposing to clarify the description of this partial county area in the Code of Federal Regulations.
Universal Linear Optics: An implementation of Boson Sampling on a Fully Reconfigurable Circuit
NASA Astrophysics Data System (ADS)
Harrold, Christopher; Carolan, Jacques; Sparrow, Chris; Russell, Nicholas J.; Silverstone, Joshua W.; Marshall, Graham D.; Thompson, Mark G.; Matthews, Jonathan C. F.; O'Brien, Jeremy L.; Laing, Anthony; Martín-López, Enrique; Shadbolt, Peter J.; Matsuda, Nobuyuki; Oguma, Manabu; Itoh, Mikitaka; Hashimoto, Toshikazu
Linear optics has paved the way for fundamental tests in quantum mechanics and has gone on to enable a broad range of quantum information processing applications for quantum technologies. We demonstrate an integrated photonics processor that is universal for linear optics. The device is a silica-on-silicon planar waveguide circuit (PLC) comprising a cascade of 15 Mach Zehnder interferometers, with 30 directional couplers and 30 tunable thermo-optic phase shifters which are electrically interfaced for the arbitrary setting of a phase. We input ensembles of up to six photons, and monitor the output with a 12-single-photon detector system. The calibrated device is capable of implementing any linear optical protocol. This enables the implementation of new quantum information processing tasks in seconds, which would have previously taken months to realise. We demonstrate 100 instances of the boson sampling problem with verification tests, and six-dimensional complex Hadamards. Also Imperial College London.
NASA Technical Reports Server (NTRS)
Elders, W. A.; Combs, J.; Coplen, T. B.; Kolesar, P.; Bird, D. K.
1974-01-01
The Dunes anomaly is a water-dominated geothermal system in the alluvium of the Salton Trough, lacking any surface expression. It was discovered by shallow-temperature gradient measurements. A 612-meter-deep test well encountered several temperature-gradient reversals, with a maximum of 105 C at 114 meters. The program involves surface geophysics, including electrical, gravity, and seismic methods, down-hole geophysics and petrophysics of core samples, isotopic and chemical studies of water samples, and petrological and geochemical studies of the cores and cuttings. The aim is (1) to determine the source and temperature history of the brines, (2) to understand the interaction between the brines and rocks, and (3) to determine the areal extent, nature, origin, and history of the geothermal system. These studies are designed to provide better definition of exploration targets for hidden geothermal anomalies and to contribute to improved techniques of exploration and resource assessment.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hirschkron, R.; Davis, R.H.; Warren, R.E.
1979-04-30
This study developed data on General Electric common core derivative engines for use in Maritime Patrol Aircraft (MPA) concept formulation studies. The study included the screening of potential General Electric turbofan and turboprop/turboshaft engines and the preparation of technical and planning information on three of the most promising engine candidates. Screening of General Electric derivative candidates was performed utilizing an analytical MPA model using synthesized mission profiles to rank the candidates in terms of fuel consumption, weight, cost and complexity. The three turboprop engines selected for further study were as follows: TF34 growth derivative version with boost and new LPTmore » (TF34/T7 Study A1), F404 derivative with booster stages and new LPT (F404/T1 Study A1), and GE27 scaled and boosted study engine (GE27/T3 Study A1). Volume I summarizes the screening analysis and contains technical, planning, installation, cost and development data for the three selected turboprop engines. Volumes II, III and IV of this report contain the detailed performance data estimates for the GE27/T3 Study A1, TF34/T7 Study A1 and F404/T1 Study A1 turboprop engines, respectively.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hirschkron, R.; Davis, R.H.; Warren, R.E.
1979-04-30
This study developed data on General Electric common core derivative engines for use in Maritime Patrol Aircraft (MPA) concept formulation studies. The study included the screening of potential General Electric turbofan and turboprop/turboshaft engines and the preparation of technical and planning information on three of the most promising engine candidates. Screening of General Electric derivative candidates was performed utilizing an analytical MPA model using synthesized mission profiles to rank the candidates in terms of fuel consumption, weight, cost and complexity. The three turboprop engines selected for further study were as follows: TF34 growth derivative version with boost and new LPTmore » (TF34/T7 Study A1), F404 derivative with booster stages and new LPT (F404/T1 Study A1), and GE27 scaled and boosted study engine (GE27/T3 Study A1). Volume I summarizes the screening analysis and contains technical, planning, installation, cost and development data for the three selected turboprop engines. Volumes II, III and IV of this report contain the detailed performance data estimates for the GE27/T3 Study A1, TF34/T7 Study A1 and F404/T1 Study A1 turboprop engines, respectively.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hirschkron, R.; Davis, R.H.; Warren, R.E.
1979-04-30
This study developed data on General Electric common core derivative engines for use in Maritime Patrol Aircraft (MPA) concept formulation studies. The study included the screening of potential General Electric turbofan and turboprop/turboshaft engines and the preparation of technical and planning information on three of the most promising engine candidates. Screening of General Electric derivative candidates was performed utilizing an analytical MPA model using synthesized mission profiles to rank the candidates in terms of fuel consumption, weight, cost and complexity. The three turboprop engines selected for further study were as follows: TF34 growth derivative version with boost and new LPTmore » (TF34/T7 Study A1), F404 derivative with booster stages and new LPT (F404/T1 Study A1), and GE27 scaled and boosted study engine (GE27/T3 Study A1). Volume I summarizes the screening analysis and contains technical, planning, installation, cost and development data for the three selected turboprop engines. Volumes II, III and IV of this report contain the detailed performance data estimates for the GE27/T3 Study A1, TF34/T7 Study A1 and F404/T1 Study A1 turboprop engines, respectively.« less
ERIC Educational Resources Information Center
Bledsoe, Karen E.; Flick, Lawrence
2012-01-01
This phenomenographic study documented changes in student-held electrical concepts the development of meaningful learning among students with both low and high prior knowledge within a problem-based learning (PBL) undergraduate electrical engineering course. This paper reports on four subjects: two with high prior knowledge and two with low prior…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-14
... Approval and Records for Electrical Engineering Regulations--Title 46 CFR Subchapter J. The sixty-day... hours to 6,754 hours a year. 4. Title: Plan Approval and Records for Electrical Engineering Regulations.... Abstract: The information sought here is needed to ensure compliance with our rules on electrical...
Kana, Kujaany; Song, Hannah; Laschinger, Carol; Zandstra, Peter W; Radisic, Milica
2015-09-01
Myocardial infarction, a prevalent cardiovascular disease, is associated with cardiomyocyte cell death, and eventually heart failure. Cardiac tissue engineering has provided hopes for alternative treatment options, and high-fidelity tissue models for drug discovery. The signal transduction mechanisms relayed in response to mechanoelectrical (physical) stimulation or biochemical stimulation (hormones, cytokines, or drugs) in engineered heart tissues (EHTs) are poorly understood. In this study, an EHT model was used to elucidate the signaling mechanisms involved when insulin was applied in the presence of electrical stimulation, a stimulus that mimics functional heart tissue environment in vitro. EHTs were insulin treated, electrically stimulated, or applied in combination (insulin and electrical stimulation). Electrical excitability parameters (excitation threshold and maximum capture rate) were measured. Protein kinase B (AKT) and phosphatidylinositol-3-kinase (PI3K) phosphorylation revealed that insulin and electrical stimulation relayed electrical excitability through two separate signaling cascades, while there was a negative crosstalk between sustained activation of AKT and PI3K.
Flexible 2D RF Nanoelectronics based on Layered Semiconductor Transistor (NBIT III)
2016-11-11
Experimental and computational studies in multidisciplinary fields of electrical, mechanical engineering , and materials science were conducted to achieve...plan for this project. Experimental and computational studies in multidisciplinary fields of electrical, mechanical engineering , and materials...electrostatic or physisorption gating, defect engineering , and substitutional doping during the growth. These methods result in uniform doping or composition
ERIC Educational Resources Information Center
Dodridge, Melvyn; Kassinopoulos, Marios
2003-01-01
The programmes offered by both institutions are geared to the application of current technology. All the University of Derby programmes, including the BSc(Hons) degree in Electrical and Electronic Engineering and the Higher Technical Institute Diploma in Electrical Engineering, are accredited in the UK at Incorporated Engineer level by the…
1984-12-01
AFLRL No. 178 By oi Harry E. Dietzmann ,< Engines, Emissions.and Vehicle Research Division Southwest Research Institute San Antonio, Texas Prppared...the possibility of replacing the currently used electric forklift with diesel engine-powered forklifts in handling hazardous materials. Electric ...concern; however, these concerns may be amplified when the vehicle is operating under a malfunction mode. Malfunctions include simulating a plugged
Implementation of a Multidisciplinary Professional Skills Course at an Electrical Engineering School
ERIC Educational Resources Information Center
Gider, F.; Likar, B.; Kern, T.; Miklavcic, D.
2012-01-01
This paper describes a case study of an innovative approach to teaching at an engineering school. The postgraduate course "Project Work and Communication in Research and Development (R&D)" was developed at the Faculty of Electrical Engineering of the University of Ljubljana, Ljubljana, Slovenia. The main aim of the course was to make…
Investigation of the part-load performance of two 1.12 MW regenerative marine gas turbines
NASA Astrophysics Data System (ADS)
Korakianitis, T.; Beier, K. J.
1994-04-01
Regenerative and intercooled-regenerative gas turbine engines with low pressure ratio have significant efficiency advantages over traditional aero-derivative engines of higher pressure ratios, and can compete with modern diesel engines for marine propulsion. Their performance is extremely sensitive to thermodynamic-cycle parameter choices and the type of components. The performances of two 1.12 MW (1500 hp) regenerative gas turbines are predicted with computer simulations. One engine has a single-shaft configuration, and the other has a gas-generator/power-turbine combination. The latter arrangement is essential for wide off-design operating regime. The performance of each engine driving fixed-pitch and controllable-pitch propellers, or an AC electric bus (for electric-motor-driven propellers) is investigated. For commercial applications the controllable-pitch propeller may have efficiency advantages (depending on engine type and shaft arrangements). For military applications the electric drive provides better operational flexibility.
The performance of solar thermal electric power systems employing small heat engines
NASA Technical Reports Server (NTRS)
Pons, R. L.
1980-01-01
The paper presents a comparative analysis of small (10 to 100 KWe) heat engines for use with a solar thermal electric system employing the point-focusing, distributed receiver (PF-DR) concept. Stirling, Brayton, and Rankine cycle engines are evaluated for a nominal overall system power level of 1 MWe, although the concept is applicable to power levels up to at least 10 MWe. Multiple concentrators are electrically connected to achieve the desired plant output. Best performance is achieved with the Stirling engine, resulting in a system Levelized Busbar Energy Cost of just under 50 mills/kWH and a Capital Cost of $900/kW, based on the use of mass-produced components. Brayton and Rankine engines show somewhat less performance but are viable alternatives with particular benefits for special applications. All three engines show excellent performance for the small community application.
Microbial fuel cells - Applications for generation of electrical power and beyond.
Mathuriya, Abhilasha Singh; Yakhmi, J V
2016-01-01
A Microbial Fuel Cell is a bioelectrochemical device that exploits metabolic activities of living microorganisms for generation of electric current. The usefulness and unique and exclusive architecture of this device has received wide attention recently of engineers and researchers of various disciplines such as microbiologists, chemical engineers, biotechnologists, environment engineers and mechanical engineers, and the subject of MFCs has thereby progressed as a well-developed technology. Sustained innovations and continuous development efforts have established the usefulness of MFCs towards many specialized and value-added applications beyond electricity generation, such as wastewater treatment and implantable body devices. This review is an attempt to provide an update on this rapidly growing technology.
2009-12-01
vehicles so do some electric vehicle braking systems (MIT, 2008). e. Brakes Regenerative braking on electric vehicles recoups some of the energy lost...engine is required to replace the energy lost by braking . Regenerative braking takes some of the lost energy during braking and turns it into...Motors and Tesla Motors offer regenerative breaking in their respective electric vehicles. Tesla explains regenerative braking as “engine braking
Carvlin, Graeme N; Lugo, Humberto; Olmedo, Luis; Bejarano, Ester; Wilkie, Alexa; Meltzer, Dan; Wong, Michelle; King, Galatea; Northcross, Amanda; Jerrett, Michael; English, Paul B; Hammond, Donald; Seto, Edmund
2017-12-01
The Imperial County Community Air Monitoring Network was developed as part of a community-engaged research study to provide real-time particulate matter (PM) air quality information at a high spatial resolution in Imperial County, California. The network augmented the few existing regulatory monitors and increased monitoring near susceptible populations. Monitors were both calibrated and field validated, a key component of evaluating the quality of the data produced by the community monitoring network. This paper examines the performance of a customized version of the low-cost Dylos optical particle counter used in the community air monitors compared with both PM 2.5 and PM 10 (particulate matter with aerodynamic diameters <2.5 and <10 μm, respectively) federal equivalent method (FEM) beta-attenuation monitors (BAMs) and federal reference method (FRM) gravimetric filters at a collocation site in the study area. A conversion equation was developed that estimates particle mass concentrations from the native Dylos particle counts, taking into account relative humidity. The R 2 for converted hourly averaged Dylos mass measurements versus a PM 2.5 BAM was 0.79 and that versus a PM 10 BAM was 0.78. The performance of the conversion equation was evaluated at six other sites with collocated PM 2.5 environmental beta-attenuation monitors (EBAMs) located throughout Imperial County. The agreement of the Dylos with the EBAMs was moderate to high (R 2 = 0.35-0.81). The performance of low-cost air quality sensors in community networks is currently not well documented. This paper provides a methodology for quantifying the performance of a next-generation Dylos PM sensor used in the Imperial County Community Air Monitoring Network. This air quality network provides data at a much finer spatial and temporal resolution than has previously been possible with government monitoring efforts. Once calibrated and validated, these high-resolution data may provide more information on susceptible populations, assist in the identification of air pollution hotspots, and increase community awareness of air pollution.
Idling speed control system of an internal combustion engine
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miyazaki, M.; Ishii, M.; Kako, H.
1986-09-16
This patent describes an idling speed control system of an internal combustion engine comprising: a valve device which controls the amount of intake air for the engine; an actuator which includes an electric motor for variably controlling the opening of the value device; rotation speed detector means for detecting the rotation speed of the engine; idling condition detector means for detecting the idling condition of the engine; feedback control means responsive to the detected output of the idling condition detector means for generating feedback control pulses to intermittently drive the electric motor so that the detected rotation speed of themore » engine under the idling condition may converge into a target idling rotation speed; and control means responsive to the output of detector means that detects an abnormally low rotation speed of the engine detected by the rotation speed detector means for generating control pulses that do not overlap the feedback control pulses to drive the electric motor in a predetermined direction.« less
ETR ELECTRICAL BUILDING, TRA648, INTERIOR. SWITCHGEAR. INL NEGATIVE NO. 563794. ...
ETR ELECTRICAL BUILDING, TRA-648, INTERIOR. SWITCHGEAR. INL NEGATIVE NO. 56-3794. Jack L. Anderson, Photographer, 11/26/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
ETR ELECTRICAL BUILDING, TRA648. BATTERY ROOM. INL NEGATIVE NO. 563785. ...
ETR ELECTRICAL BUILDING, TRA-648. BATTERY ROOM. INL NEGATIVE NO. 56-3785. Jack L. Anderson, Photographer, 11/26/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
gasoline engine does not run when the vehicle is at rest. When pulling out, the electric starter/generator the gasoline engine when pulling out from a stop and generating electricity which is stored in the
Missouri S&T formula electric racing.
DOT National Transportation Integrated Search
2014-05-01
The Formula Electric racing team will promote Missouri S&Ts engineering excellence by successfully competing against other top : engineering universities in the US and around the world. Students on the team will have the opportunity to reinforce t...
Department of Defense Instrumentation Award.
1985-07-01
Office of Scientific Research Prepared by The Electrical Engineering Department and The Laboratory for Plasma and Fusion Energy Studies University of...Electrical Engineering Department Laboratory for Plasma and Fusion Energy Studies University of Maryland College Park, Maryland 20742 Principal Investigator
Optimization of Electrical Stimulation Parameters for Cardiac Tissue Engineering
Tandon, Nina; Marsano, Anna; Maidhof, Robert; Wan, Leo; Park, Hyoungshin; Vunjak-Novakovic, Gordana
2010-01-01
In vitro application of pulsatile electrical stimulation to neonatal rat cardiomyocytes cultured on polymer scaffolds has been shown to improve the functional assembly of cells into contractile cardiac tissue constrcuts. However, to date, the conditions of electrical stimulation have not been optimized. We have systematically varied the electrode material, amplitude and frequency of stimulation, to determine the conditions that are optimal for cardiac tissue engineering. Carbon electrodes, exhibiting the highest charge-injection capacity and producing cardiac tissues with the best structural and contractile properties, and were thus used in tissue engineering studies. Cardiac tissues stimulated at 3V/cm amplitude and 3Hz frequency had the highest tissue density, the highest concentrations of cardiac troponin-I and connexin-43, and the best developed contractile behavior. These findings contribute to defining bioreactor design specifications and electrical stimulation regime for cardiac tissue engineering. PMID:21604379
Radisic, Milica; Park, Hyoungshin; Shing, Helen; Consi, Thomas; Schoen, Frederick J; Langer, Robert; Freed, Lisa E; Vunjak-Novakovic, Gordana
2004-12-28
The major challenge of tissue engineering is directing the cells to establish the physiological structure and function of the tissue being replaced across different hierarchical scales. To engineer myocardium, biophysical regulation of the cells needs to recapitulate multiple signals present in the native heart. We hypothesized that excitation-contraction coupling, critical for the development and function of a normal heart, determines the development and function of engineered myocardium. To induce synchronous contractions of cultured cardiac constructs, we applied electrical signals designed to mimic those in the native heart. Over only 8 days in vitro, electrical field stimulation induced cell alignment and coupling, increased the amplitude of synchronous construct contractions by a factor of 7, and resulted in a remarkable level of ultrastructural organization. Development of conductive and contractile properties of cardiac constructs was concurrent, with strong dependence on the initiation and duration of electrical stimulation.
Electrical innovations, authority and consulting expertise in late Victorian Britain
Arapostathis, Stathis
2013-01-01
In this article I examine the practices of electrical engineering experts, with special reference to their role in the implementation of innovations in late Victorian electrical networks. I focus on the consulting work of two leading figures in the scientific and engineering world of the period, Alexander Kennedy and William Preece. Both were Fellows of the Royal Society and both developed large-scale consulting activities in the emerging electrical industry of light and power. At the core of the study I place the issues of trust and authority, and the bearing of these on the engineering expertise of consultants in late Victorian Britain. I argue that the ascription of expertise to these engineers and the trust placed in their advice were products of power relations on the local scale. The study seeks to unravel both the technical and the social reasons for authoritative patterns of consulting expertise. PMID:24686584
Control system for, and a method of, heating an operator station of a work machine
Baker, Thomas M.; Hoff, Brian D.; Akasam, Sivaprasad
2005-04-05
There are situations in which an operator remains in an operator station of a work machine when an engine of the work machine is inactive. The present invention includes a control system for, and a method of, heating the operator station when the engine is inactive. A heating system of the work machine includes an electrically-powered coolant pump, a power source, and at least one piece of warmed machinery. An operator heat controller is moveable between a first and a second position, and is operable to connect the electrically-powered coolant pump to the power source when the engine is inactive and the operator heat controller is in the first position. Thus, by deactivating the engine and then moving the operator heat controller to the first position, the operator may supply electrical energy to the electrically-powered coolant pump, which is operably coupled to heat the operator station.
Solar-Powered Electric Propulsion Systems: Engineering and Applications
NASA Technical Reports Server (NTRS)
Stearns, J. W.; Kerrisk, D. J.
1966-01-01
Lightweight, multikilowatt solar power arrays in conjunction with electric propulsion offer potential improvements to space exploration, extending the usefulness of existing launch vehicles to higher-energy missions. Characteristics of solar-powered electric propulsion missions are outlined, and preliminary performance estimates are shown. Spacecraft system engineering is discussed with respect to parametric trade-offs in power and propulsion system design. Relationships between mission performance and propulsion system performance are illustrated. The present state of the art of electric propulsion systems is reviewed and related to the mission requirements identified earlier. The propulsion system design and test requirements for a mission spacecraft are identified and discussed. Although only ion engine systems are currently available, certain plasma propulsion systems offer some advantages in over-all system design. These are identified, and goals are set for plasma-thrustor systems to make them competitive with ion-engine systems for mission applications.
Technician Career Opportunities in Engineering Technology.
ERIC Educational Resources Information Center
Engineers' Council for Professional Development, New York, NY.
Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…
INNOVATIVE HYBRID GAS/ELECTRIC CHILLER COGENERATION
DOE Office of Scientific and Technical Information (OSTI.GOV)
Todd Kollross; Mike Connolly
2004-06-30
Engine-driven chillers are quickly gaining popularity in the market place (increased from 7,000 tons in 1994 to greater than 50,000 tons in 1998) due to their high efficiency, electric peak shaving capability, and overall low operating cost. The product offers attractive economics (5 year pay back or less) in many applications, based on areas cooling requirements and electric pricing structure. When heat is recovered and utilized from the engine, the energy resource efficiency of a natural gas engine-driven chiller is higher than all competing products. As deregulation proceeds, real time pricing rate structures promise high peak demand electric rates, butmore » low off-peak electric rates. An emerging trend with commercial building owners and managers who require air conditioning today is to reduce their operating costs by installing hybrid chiller systems that combine gas and electric units. Hybrid systems not only reduce peak electric demand charges, but also allow customers to level their energy load profiles and select the most economical energy source, gas or electricity, from hour to hour. Until recently, however, all hybrid systems incorporated one or more gas-powered chillers (engine driven and/or absorption) and one or more conventional electric units. Typically, the cooling capacity of hybrid chiller plants ranges from the hundreds to thousands of refrigeration tons, with multiple chillers affording the user a choice of cooling systems. But this flexibility is less of an option for building operators who have limited room for equipment. To address this technology gap, a hybrid chiller was developed by Alturdyne that combines a gas engine, an electric motor and a refrigeration compressor within a single package. However, this product had not been designed to realize the full features and benefits possible by combining an engine, motor/generator and compressor. The purpose of this project is to develop a new hybrid chiller that can (1) reduce end-user energy costs, (2) lower building peak electric load, (3) increase energy efficiency, and (4) provide standby power. This new hybrid product is designed to allow the engine to generate electricity or drive the chiller's compressor, based on the market price and conditions of the available energy sources. Building owners can minimize cooling costs by operating with natural gas or electricity, depending on time of day energy rates. In the event of a backout, the building owner could either operate the product as a synchronous generator set, thus providing standby power, or continue to operate a chiller to provide air conditioning with support of a small generator set to cover the chiller's electric auxiliary requirements. The ability to utilize the same piece of equipment as a hybrid gas/electric chiller or a standby generator greatly enhances its economic attractiveness and would substantially expand the opportunities for high efficiency cooling products.« less
Wang, Wenxuan; Zhu, Jian; Jiang, Jianxin; Xu, Changqing; Wu, Shurong; Guan, Li; Zhang, Zhaoxia; Wu, Menglei; Du, Jingnan
2016-11-01
"Sumali," as an imported cobalt ore from overseas, was a sort of precious and valuable pigment used for imperial kilns only, which produces characteristic "iron spot" to blue-and-white porcelain in early Ming Dynasty (A.D. 14th-15th century). Although there were some old studies on it, the morphology and formation of iron spot has not been fully investigated and understood. Therefore, five selected samples with typical spot from Jingdezhen imperial kiln in Ming Yongle periods (A.D. 1403-1424) were analyzed by various microscopic analysis including 3D digital microscope, SEM-EDS and EPMA. According to SEM images, samples can be divided into three groups: un-reflected "iron spot" without crystals, un-reflected "iron spot" with crystals and reflected "iron spot" with crystals. Furthermore, 3D micro-images revealed that "iron spots" separate out dendritic or snow-shaped crystals of iron only on and parallel to the surface of glaze for which "iron spot" show strong metallic luster. Combining with microscopic observation and microanalysis on crystallization and non-crystallization areas, it indicates that firing oxygen concentration is the ultimate causation of forming reflective iron spot which has a shallower distribution below the surface and limits crystals growing down. More details about characters of "iron spot" used "Sumali" were found and provided new clues to coloration, formation mechanism and porcelain producing technology of imperial kiln from 14th to 15th centuries of China. © 2016 Wiley Periodicals, Inc.
1 At speeds above mid-range, both the engine and electric motor are used to propel the vehicle. The gasoline engine provides power to the drive-train directly and to the electric motor via the generator. Go , generator, power split device, and electric motor visible. The car is moving. There are blue arrows flowing
Analog simulation of a hybrid gasoline-electric vehicle
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gilmore, D.B.
1982-03-01
Hybrid vehicles using both internal combustion engines and electric motors represent one way to reduce fuel consumption. Our demonstration project envisioned more than halving the fuel consumption of a passenger vehicle by reducing greatly the capacity of its engine and adding regenerative braking and an all-electric range. We also envisaged maintaining the same performance as current passenger vehicles. A 0-6 000 rpm gasoline-driven internal combustion engine, two 0-7 800 rpm electric motors, a 0-7 800 rpm flywheel, and lead-acid batteries are the major components assembled using a mechnical epicyclic gear box. An EAI 681 analog computer allowed us to examinemore » quickly the effects of engine capacity, flywheel size, battery voltage, gear ratios, and mode of operation. An external potentiometer control on the computer allowed the operator to drive the vehicle through any acceleration cycle on level ground. We have shown that a 1.3 litre gasoline engine, two 13 kW separately excited direct current electric motors, a 38 kg flywheel, and a 48-volt battery pack will provide the same maximum performance as a conventional 4.1 litre internal combustion engine with automatic transmission at vehicle speeds below 60 km/h, and lower but satisfactory highway performance up to a top speed of 130 km/h. The transmission has undergone laboratory tests; it is to be road-tested in the first half of 1982.« less
NASA Astrophysics Data System (ADS)
Joyner, Claude Russell; Fowler, Bruce; Matthews, John
2003-01-01
In space, whether in a stable satellite orbit around a planetary body or traveling as a deep space exploration craft, power is just as important as the propulsion. The need for power is especially important for in-space vehicles that use Electric Propulsion. Using nuclear power with electric propulsion has the potential to provide increased payload fractions and reduced mission times to the outer planets. One of the critical engineering and design aspects of nuclear electric propulsion at required mission optimized power levels is the mechanism that is used to convert the thermal energy of the reactor to electrical power. The use of closed Brayton cycles has been studied over the past 30 or years and shown to be the optimum approach for power requirements that range from ten to hundreds of kilowatts of power. It also has been found to be scalable to higher power levels. The Closed Brayton Cycle (CBC) engine power conversion unit (PCU) is the most flexible for a wide range of power conversion needs and uses state-of-the-art, demonstrated engineering approaches. It also is in use with many commercial power plants today. The long life requirements and need for uninterrupted operation for nuclear electric propulsion demands high reliability from a CBC engine. A CBC engine design for use with a Nuclear Electric Propulsion (NEP) system has been defined based on Pratt & Whitney's data from designing long-life turbo-machines such as the Space Shuttle turbopumps and military gas turbines and the use of proven integrated control/health management systems (EHMS). An integrated CBC and EHMS design that is focused on using low-risk and proven technologies will over come many of the life-related design issues. This paper will discuss the use of a CBC engine as the power conversion unit coupled to a gas-cooled nuclear reactor and the design trends relative to its use for powering electric thrusters in the 25 kWe to 100kWe power level.
Control system and method for a hybrid electric vehicle
Tamor, Michael Alan
2001-03-06
Several control methods are presented for application in a hybrid electric vehicle powertrain including in various embodiments an engine, a motor/generator, a transmission coupled at an input thereof to receive torque from the engine and the motor generator coupled to augment torque provided by the engine, an energy storage device coupled to receive energy from and provide energy to the motor/generator, an engine controller (EEC) coupled to control the engine, a transmission controller (TCM) coupled to control the transmission and a vehicle system controller (VSC) adapted to control the powertrain.
Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications
NASA Technical Reports Server (NTRS)
Shaltens, Richard K.; Schreiber, Jeffrey G.
1990-01-01
Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.
Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications
NASA Astrophysics Data System (ADS)
Shaltens, Richard K.; Schreiber, Jeffrey G.
Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.
Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications
NASA Technical Reports Server (NTRS)
Shaltens, Richard K.; Schreiber, Jeffrey G.
1990-01-01
Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's
Development of a Dedicated Speech Work Station.
1984-12-01
AD-Ai55 465 DEVELOPMENT OF R DEDICATED SPEECH WORK STTION(U) AIR / FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOOL OF ENGINEERING W H LIEBER DEC 84...Presented to the Faculty of the School of Engineering of the Air Force Institute of Technology Air University in Partial Fulfillment of the Requirement for...the Degree of Master of Science in Electrical Engineering by William H. Lieber, B.S.E.E. Capt USAF Graduate Electrical Engineering December 1984
Lousy chicks: Chewing lice from the Imperial Shag, Leucocarbo atriceps.
Leonardi, María Soledad; Quintana, Flavio
2017-12-01
Forty-one imperial shag chicks were sampled for lice during the breeding season of 2014 in Punta León, Argentina. We found 2 lice species, Pectinopygus turbinatus infesting the body and Piagetiella caputincisum present in the oral cavity of the birds. This constitutes the first host record for P. turbinatus and the first record for the continental Argentina for P. caputincisum . Ninety-three percent of the chicks were infested by at least one lice species. P . turbinatus was present in all of the lousy chicks, while P. caputincisum infested 84.2% of them. The mean intensity was 29.5 and the range 1-129. There was no difference in prevalence, mean intensity or mean abundance between louse species. However, we found differences among the pattern of infestation of each species. Imperial shag chicks were infested by their parents during their first days of life by P. turbinatus , mainly in nymphal stage and by P. caputincisum as adult lice. Our results showed differences among lice species that could be related to the restrictions that lice from seabirds faced during their life cycle.
Killgrove, Kristina; Montgomery, Janet
2016-01-01
Migration within the Roman Empire occurred at multiple scales and was engaged in both voluntarily and involuntarily. Because of the lengthy tradition of classical studies, bioarchaeological analyses must be fully contextualized within the bounds of history, material culture, and epigraphy. In order to assess migration to Rome within an updated contextual framework, strontium isotope analysis was performed on 105 individuals from two cemeteries associated with Imperial Rome—Casal Bertone and Castellaccio Europarco—and oxygen and carbon isotope analyses were performed on a subset of 55 individuals. Statistical analysis and comparisons with expected local ranges found several outliers who likely immigrated to Rome from elsewhere. Demographics of the immigrants show men and children migrated, and a comparison of carbon isotopes from teeth and bone samples suggests the immigrants may have significantly changed their diet. These data represent the first physical evidence of individual migrants to Imperial Rome. This case study demonstrates the importance of employing bioarchaeology to generate a deeper understanding of a complex ancient urban center. PMID:26863610
Killgrove, Kristina; Montgomery, Janet
2016-01-01
Migration within the Roman Empire occurred at multiple scales and was engaged in both voluntarily and involuntarily. Because of the lengthy tradition of classical studies, bioarchaeological analyses must be fully contextualized within the bounds of history, material culture, and epigraphy. In order to assess migration to Rome within an updated contextual framework, strontium isotope analysis was performed on 105 individuals from two cemeteries associated with Imperial Rome-Casal Bertone and Castellaccio Europarco-and oxygen and carbon isotope analyses were performed on a subset of 55 individuals. Statistical analysis and comparisons with expected local ranges found several outliers who likely immigrated to Rome from elsewhere. Demographics of the immigrants show men and children migrated, and a comparison of carbon isotopes from teeth and bone samples suggests the immigrants may have significantly changed their diet. These data represent the first physical evidence of individual migrants to Imperial Rome. This case study demonstrates the importance of employing bioarchaeology to generate a deeper understanding of a complex ancient urban center.
Colleges Offer New Alternative-Energy Degrees, Fueled by Student Demand
ERIC Educational Resources Information Center
Basken, Paul
2009-01-01
More U.S. college students are enrolling in power- and energy-engineering courses, but the increase is not enough to meet the need, says a new report by the IEEE, the professional association of electrical engineers. About 45% of engineers at electric utilities are expected to retire or leave their jobs within five years, creating as many as…
ERIC Educational Resources Information Center
Garcia, Oscar N.; Varanasi, Murali R.; Acevedo, Miguel F.; Guturu, Parthasarathy
2011-01-01
We analyze and study the beginning of a new Electrical Engineering Department, supported by an NSF Departmental Level Reform award, within a new College of Engineering in the 21st Century and also describe the academic approach and influences of an innovative cognitive-based approach to curriculum development. In addition, the approach taken…
ERIC Educational Resources Information Center
Institute of Electrical and Electronics Engineers, Inc., New York, NY.
The Institute of Electrical and Electronics Engineers (IEEE) validation program is designed to motivate persons practicing in electrical and electronics engineering to pursue quality technical continuing education courses offered by any responsible sponsor. The rapid acceptance of the validation program necessitated the additional development of a…
Design of Electronic Experiments Using Computer Generated Virtual Instruments
1994-03-01
work associated with the classical electronics laboratory experiments required in a tpical Electrical Engineering program. This thesis reports the...requiremnents for the degree of MASTER OF SCIENCE IN ELECITRICAL ENGINEERING from the NAVAL POSTGRADUATE SCHOOL March 1994 Aufhfi_...Thcdore Joseph SerbinskI Approved by: Sherif Michael, Thesis Advisor Department of Electrical and Comte Engineering ii ABSIRACT The recent availability
ERIC Educational Resources Information Center
Periago, M. Cristina; Bohigas, Xavier
2005-01-01
The aim of this research was to evaluate and analyse second-year industrial engineering and chemical engineering students prior knowledge of conceptual aspects of "circuit theory". Specifically, we focused on the basic concepts of electric potential and current intensity and on the fundamental relationship between them as expressed by Ohm's law.…
Electrical engineering research support for FDOT Traffic Statistics Office
DOT National Transportation Integrated Search
2010-03-01
The aim of this project was to provide electrical engineering support for the telemetered traffic monitoring sites (TTMSs) operated by the Statistics Office of the Florida Department of Transportation. This project was a continuation of project BD-54...
MTR BASEMENT. GENERAL ELECTRIC CONTROL CONSOLE FOR AIRCRAFT NUCLEAR PROPULSION ...
MTR BASEMENT. GENERAL ELECTRIC CONTROL CONSOLE FOR AIRCRAFT NUCLEAR PROPULSION EXPERIMENT NO. 1. INL NEGATIVE NO. 6510. Unknown Photographer, 9/29/1959 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
Ally, Moonis R.; Sharma, Vishaldeep; Abdelaziz, Omar
2017-02-21
The choice of driving a heat pump with an electrically$-$or a thermally-driven engine is a vexing question complicated by the carbon footprint and environmental impact of using electricity versus natural gas (or waste heat) as the main driver for the respective engines. The amount of useful work generated by these two distinct engines is the focal point of this paper, which addresses a key question: which engine presents a better choice for a given heat pumping application within the constraints of energy and environmental stewardship? Extensive use of energy, exergy, and availability analysis is necessary to quantify the useful workmore » and to examine the issue holistically for both types of engines. The methodology explains why the output of work from these two distinct engines to satisfy a given load is vastly different, a direct consequence of their inherent Irreversibility. Thermodynamic consistency is guaranteed by satisfaction of the First and Second Laws applied to closed systems and their subsystems. The general conclusion is that thermally-driven engines are not industrious converters of heat to mechanical work.« less
Large gas injection engine nearing completion in Japan
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wilson, K.
1994-04-01
One of the world's largest diesel engines to be operated on methane gas under pressure injection is now nearing completion at the Chiba works of Mitsui, in Japan. The MAN B W-designed 12K80MC-GI-S engine - built by Mitsui Engineering and Shipbuilding Co., in Tamano, Japan - will develop a total of 40,680 kW when operating at 103.4 r/min. It will drive an electrical generator of 39,740 kW output to provide power to Mitsui's Chiba works. The arrangement will be such that excess electrical energy can be taken into the local electrical supply system. Since the engine will be operating inmore » an area of strict emission control, the exhaust gas from the engine will pass through a large SCR before reaching the main chimney. Low-sulfur diesel oil will be used as the pilot fuel, and will amount to only eight percent of the fuel charge at full load. The MC-GI series of engines can be used as main propulsion engines in LNG carriers or stationary power plants. 3 figs.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ally, Moonis R.; Sharma, Vishaldeep; Abdelaziz, Omar
The choice of driving a heat pump with an electrically$-$or a thermally-driven engine is a vexing question complicated by the carbon footprint and environmental impact of using electricity versus natural gas (or waste heat) as the main driver for the respective engines. The amount of useful work generated by these two distinct engines is the focal point of this paper, which addresses a key question: which engine presents a better choice for a given heat pumping application within the constraints of energy and environmental stewardship? Extensive use of energy, exergy, and availability analysis is necessary to quantify the useful workmore » and to examine the issue holistically for both types of engines. The methodology explains why the output of work from these two distinct engines to satisfy a given load is vastly different, a direct consequence of their inherent Irreversibility. Thermodynamic consistency is guaranteed by satisfaction of the First and Second Laws applied to closed systems and their subsystems. The general conclusion is that thermally-driven engines are not industrious converters of heat to mechanical work.« less
Flex Fuel Optimized SI and HCCI Engine
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhu, Guoming; Schock, Harold; Yang, Xiaojian
The central objective of the proposed work is to demonstrate an HCCI (homogeneous charge compression ignition) capable SI (spark ignited) engine that is capable of fast and smooth mode transition between SI and HCCI combustion modes. The model-based control technique was used to develop and validate the proposed control strategy for the fast and smooth combustion mode transition based upon the developed control-oriented engine; and an HCCI capable SI engine was designed and constructed using production ready two-step valve-train with electrical variable valve timing actuating system. Finally, smooth combustion mode transition was demonstrated on a metal engine within eight enginemore » cycles. The Chrysler turbocharged 2.0L I4 direct injection engine was selected as the base engine for the project and the engine was modified to fit the two-step valve with electrical variable valve timing actuating system. To develop the model-based control strategy for stable HCCI combustion and smooth combustion mode transition between SI and HCCI combustion, a control-oriented real-time engine model was developed and implemented into the MSU HIL (hardware-in-the-loop) simulation environment. The developed model was used to study the engine actuating system requirement for the smooth and fast combustion mode transition and to develop the proposed mode transition control strategy. Finally, a single cylinder optical engine was designed and fabricated for studying the HCCI combustion characteristics. Optical engine combustion tests were conducted in both SI and HCCI combustion modes and the test results were used to calibrate the developed control-oriented engine model. Intensive GT-Power simulations were conducted to determine the optimal valve lift (high and low) and the cam phasing range. Delphi was selected to be the supplier for the two-step valve-train and Denso to be the electrical variable valve timing system supplier. A test bench was constructed to develop control strategies for the electrical variable valve timing (VVT) actuating system and satisfactory electrical VVT responses were obtained. Target engine control system was designed and fabricated at MSU for both single-cylinder optical and multi-cylinder metal engines. Finally, the developed control-oriented engine model was successfully implemented into the HIL simulation environment. The Chrysler 2.0L I4 DI engine was modified to fit the two-step vale with electrical variable valve timing actuating system. A used prototype engine was used as the base engine and the cylinder head was modified for the two-step valve with electrical VVT actuating system. Engine validation tests indicated that cylinder #3 has very high blow-by and it cannot be reduced with new pistons and rings. Due to the time constraint, it was decided to convert the four-cylinder engine into a single cylinder engine by blocking both intake and exhaust ports of the unused cylinders. The model-based combustion mode transition control algorithm was developed in the MSU HIL simulation environment and the Simulink based control strategy was implemented into the target engine controller. With both single-cylinder metal engine and control strategy ready, stable HCCI combustion was achived with COV of 2.1% Motoring tests were conducted to validate the actuator transient operations including valve lift, electrical variable valve timing, electronic throttle, multiple spark and injection controls. After the actuator operations were confirmed, 15-cycle smooth combustion mode transition from SI to HCCI combustion was achieved; and fast 8-cycle smooth combustion mode transition followed. With a fast electrical variable valve timing actuator, the number of engine cycles required for mode transition can be reduced down to five. It was also found that the combustion mode transition is sensitive to the charge air and engine coolant temperatures and regulating the corresponding temperatures to the target levels during the combustion mode transition is the key for a smooth combustion mode transition. As a summary, the proposed combustion mode transition strategy using the hybrid combustion mode that starts with the SI combustion and ends with the HCCI combustion was experimentally validated on a metal engine. The proposed model-based control approach made it possible to complete the SI-HCCI combustion mode transition within eight engine cycles utilizing the well controlled hybrid combustion mode. Without intensive control-oriented engine modeling and HIL simulation study of using the hybrid combustion mode during the mode transition, it would be impossible to validate the proposed combustion mode transition strategy in a very short period.« less
Power processing and control requirements of dispersed solar thermal electric generation systems
NASA Technical Reports Server (NTRS)
Das, R. L.
1980-01-01
Power Processing and Control requirements of Dispersed Receiver Solar Thermal Electric Generation Systems are presented. Kinematic Stirling Engines, Brayton Engines and Rankine Engines are considered as prime movers. Various types of generators are considered for ac and dc link generations. It is found that ac-ac Power Conversion is not suitable for implementation at this time. It is also found that ac-dc-ac Power Conversion with a large central inverter is more efficient than ac-dc-ac Power Conversion using small dispersed inverters. Ac-link solar thermal electric plants face potential stability and synchronization problems. Research and development efforts are needed in improving component performance characteristics and generation efficiency to make Solar Thermal Electric Generation economically attractive.
NASA Puffin Electric Tailsitter VTOL Concept
NASA Technical Reports Server (NTRS)
Moore, Mark D.
2010-01-01
Electric propulsion offers dramatic new vehicle mission capabilities, not possible with turbine or reciprocating engines; including high reliability and efficiency, low engine weight and maintenance, low cooling drag and volume required, very low noise and vibration, and zero emissions. The only penalizing characteristic of electric propulsion is the current energy storage technology level, which is set to triple over the next 5-10 years through huge new investments in this field. Most importantly, electric propulsion offers incredible new degrees of freedom in aircraft system integration to achieve unprecedented levels of aerodynamic, propulsive, control, and structural synergistic coupling. A unique characteristic of electric propulsion is that the technology is nearly scale-free, permitting small motors to be parallelized for fail-safe redundancy, or distributed across the airframe for tightly coupled interdisciplinary functionality without significant impacts in motor-controller efficiency or specific weight. Maximizing the potential benefit of electric propulsion is dependent on applying this technology to synergistic mission concepts. The vehicle missions with the most benefit include those which constrain environmental impact (or limit noise, exhaust, or emission signatures) are short range, or where large differences exist in the propulsion system sizing between takeoff and cruise conditions. Electric propulsion offers the following unique capabilities that other propulsion systems can t provide for short range Vertical Takeoff and Landing (VTOL) aircraft; elimination of engine noise and emissions, drastic reduction in engine cooling and radiated heat, drastic reduction in vehicle vibration levels, drastic improvement in reliability and operating costs, variable speed output at full power, for improved cruise efficiency at low tip-speed, elimination of high/hot sizing penalty, and reduction of engine-out penalties.
Start-up and control method and apparatus for resonant free piston Stirling engine
Walsh, Michael M.
1984-01-01
A resonant free-piston Stirling engine having a new and improved start-up and control method and system. A displacer linear electrodynamic machine is provided having an armature secured to and movable with the displacer and having a stator supported by the Stirling engine housing in juxtaposition to the armature. A control excitation circuit is provided for electrically exciting the displacer linear electrodynamic machine with electrical excitation signals having substantially the same frequency as the desired frequency of operation of the Stirling engine. The excitation control circuit is designed so that it selectively and controllably causes the displacer electrodynamic machine to function either as a generator load to extract power from the displacer or the control circuit selectively can be operated to cause the displacer electrodynamic machine to operate as an electric drive motor to apply additional input power to the displacer in addition to the thermodynamic power feedback to the displacer whereby the displacer linear electrodynamic machine also is used in the electric drive motor mode as a means for initially starting the resonant free-piston Stirling engine.
Mechatronics education at Virginia Tech
NASA Astrophysics Data System (ADS)
Bay, John S.; Saunders, William R.; Reinholtz, Charles F.; Pickett, Peter; Johnston, Lee
1998-12-01
The advent of more complex mechatronic systems in industry has introduced new opportunities for entry-level and practicing engineers. Today, a select group of engineers are reaching out to be more knowledgeable in a wide variety of technical areas, both mechanical and electrical. A new curriculum in mechatronics developed at Virginia Tech is starting to bring students from both the mechanical and electrical engineering departments together, providing them wit an integrated perspective on electromechanical technologies and design. The course is cross-listed and team-taught by faculty from both departments. Students from different majors are grouped together throughout the course, each group containing at least one mechanical and one electrical engineering student. This gives group members the ability to learn from one another while working on labs and projects.
7 CFR 1724.70 - Standard forms of contracts for borrowers.
Code of Federal Regulations, 2010 CFR
2010-01-01
... SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND... construction, procurement, engineering services, and architectural services financed by a loan made or... prescribes RUS procedures in promulgating electric program standard contract forms and identifies those forms...
Hoff, Brian D.; Johnson, Kris William; Algrain, Marcelo C.; Akasam, Sivaprasad
2006-06-06
A method of controlling the delivery of fluid to an engine includes receiving a fuel flow rate signal. An electric pump is arranged to deliver fluid to the engine. The speed of the electric pump is controlled based on the fuel flow rate signal.
Code of Federal Regulations, 2010 CFR
2010-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.3... authorized assistants and representatives. Engineer means a registered or licensed person, who may be a staff... Government Printing Office. NESC means the National Electrical Safety Code. RE Act means the Rural...
Code of Federal Regulations, 2014 CFR
2014-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.3... authorized assistants and representatives. Engineer means a registered or licensed person, who may be a staff... Government Printing Office. NESC means the National Electrical Safety Code. RE Act means the Rural...
Code of Federal Regulations, 2013 CFR
2013-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.3... authorized assistants and representatives. Engineer means a registered or licensed person, who may be a staff... Government Printing Office. NESC means the National Electrical Safety Code. RE Act means the Rural...
Code of Federal Regulations, 2011 CFR
2011-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.3... authorized assistants and representatives. Engineer means a registered or licensed person, who may be a staff... Government Printing Office. NESC means the National Electrical Safety Code. RE Act means the Rural...
Code of Federal Regulations, 2012 CFR
2012-01-01
... ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.3... authorized assistants and representatives. Engineer means a registered or licensed person, who may be a staff... Government Printing Office. NESC means the National Electrical Safety Code. RE Act means the Rural...
Earth observation photo taken by JPL with the Shuttle Imaging Radar-A
NASA Technical Reports Server (NTRS)
1981-01-01
Earth observation photo taken by the Jet Propulsion Laboratory (JPL) with the Shuttle Imaging Radar-A (SIR-A). This image shows a 50 by 100 kilometer (30 by 60 mile) area of the Imperial Valley in Southern California and neighboring Mexico. The checkered patterns represent agricultural fields where different types of crops in different stages of growth are cultivated. The very bright areas are (top left to lower right) the U.S. towns of Brawley, Imperial, El Centro, Calexico and the Mexican city of Mexicali. The bright L-shaped line (upper right) is the All-American water canal.
A review of Soviet plasma engine development
NASA Technical Reports Server (NTRS)
Barnett, John W.
1990-01-01
The Soviet Union has maintained a substantial and successful electric propulsion research and development effort since the 1950s; however, American researchers are generally unfamiliar with the Soviet accomplishments. Sources of information about Soviet electric propulsion research are noted. The development of plasma engines, a subset of the electric propulsion effort, is reviewed using numerous Soviet sources. The operational principles and status of several engines of the closed electron drift and high-current types are discussed. With recognition of the limited knowledge of the current Soviet program, the Soviet and American programs are compared, revealing some differences in program formulation and emphasis.
ERIC Educational Resources Information Center
Plaza, I.; Arcega, F.; Castro, M.; Llamas, M.
2011-01-01
CESEI is the acronym of the Spanish Chapter of the Education Society of IEEE (the Institute of Electric and Electronics Engineers). Every year, the CESEI awards a prize for the best doctoral thesis and FDP (final (master) degree projects) about education. The thesis or the project must be developed in the areas of electrical engineering,…
Systems Engineering of Electric and Hybrid Vehicles
NASA Technical Reports Server (NTRS)
Kurtz, D. W.; Levin, R. R.
1986-01-01
Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.
The DTIC Review. Volume 5, Number 3. Cybernetics: Enhancing Human Performance
2001-03-01
Human Factors Engineering 16. SECURITY CLASSIFICATION OF: 17. LIMITATION 18. NUMBER 19a. NAME OF RESPONSIBLE PERSON OF ABSTRACT OF PAGES Phyllis...2 AD Number: A382305 Corporate Author: Arizona University - Tucson Department of Electrical and Computer Engineering Tucson, AZ...Visualization Aids AD-A382305 Aug 2000 Arizona University - Tucson Department of Electrical and Computer Engineering Tucson, AZ 2 THIS PAGE INTENTIONALLY
Rethinking chiller plant design
DOE Office of Scientific and Technical Information (OSTI.GOV)
Meckler, M.
1998-07-01
While most refrigeration chillers operate today on electricity, the use of natural gas is becoming an increasingly attractive alternative. This is largely because electricity does not use energy very efficiency (because of transmission and combustion fuel losses), high demand charges, and the high incremental cost of electricity to operate chillers. The use of gas engine-driven chillers eliminates the high incremental cost of electricity. Additionally, gas engine-driven systems can operate with COPs up to 1.8 and, therefore, are economically viable alternatives. Recent advances in gas engine-driven and DFA absorption chillers, and in commercially viable solid and liquid desiccant-cooling systems, suggest amore » bright future for the gas industry. The use of such equipment in conjunction with or in place of commercially available electrical-powered alternatives can significantly impact demand-side management savings for utility ratepayers in the short run and provide significant hybrid opportunities for deregulated markets in the intermediate to long term.« less
Rethinking chiller plant design
DOE Office of Scientific and Technical Information (OSTI.GOV)
Meckler, M.
1998-01-01
While most refrigeration chillers operate today on electricity, the use of natural gas is becoming an increasingly attractive alternative. This is largely because electricity does not use energy very efficiently (due to transmission and combustion fuel losses), high demand charges, and the high incremental cost of electricity to operate chillers. The use of gas engine-driven chillers eliminates the high incremental cost of electricity. Additionally, gas engine-driven systems can operate with COPs up to 1.8 and therefore are economically viable alternatives. Recent advances in gas engine-driven and direct-fired absorption chillers and in commercially viable solid- and liquid-desiccant cooling systems suggest amore » bright future for the gas industry. The use of such equipment in conjunction with or in place of commercially available electrical-powered alternatives can significantly impact demand-side management savings for utility ratepayers in the short run and provide significant hybrid opportunities for deregulated markets in the intermediate to long term.« less
[Metallurgic drugs in ancient Japan].
Sugiyama, S
2001-01-01
Advancements in metallurgic and pharmaceutical chemistry in ancient Japan were made by people like Mangan-Shonin, who combined elements from Shinto, Buddhism, and Taoism to take advantage of technologies brought by Chinese and Korean immigrants. The Shonin himself, though it may be considered a wild speculation, could well be such an immigrant. Along with the immigrants, the Shonin established government-subsidized temples (Jingu-ji, Jogaku-ji) throughout the country under sponsorship by the Imperial Court for the purpose of raising funds through private donations. Research and educational activities conducted in these temples ultimately resulted in a well-established body of chemical engineers who could excavate chemical substances as well as alter their natures. According to a list of regional products (Sasaki,19) 1972) up to the 14th century, these chemical substances and their derivative products included iron from the Hitachi region, cast metal from Shimotsuke, swords from Sagami, face powder (lead carbonate) from Ise, mercury, and gold.
NASA Astrophysics Data System (ADS)
Bainbridge, William Sims
This brief introductory chapter sets the stage for a broad discussion of many aspects of virtual worlds, by comparing episodes experienced by two avatar researchers, one in Second Life (SL), and the other in Star Wars Galaxies (SWG). Interviewer Wilber attends a medieval dance on an SL island created by Starfleet, an innovative and hard-working group of 500 Star Trek fans, who have created working virtual technology and soaring architecture to make real their fantasies about the human future. Algorithma Teq visits the Mos Eisley Cantina in SWG, where Luke Skywalker originally met Han Solo, and is scrutinized by two Imperial storm troopers, even as she attempts to remain aloof from the Star Wars mythos and simply practice her engineering skills in making droids. It can be useful to distinguish gamelike virtual worlds from non-game worlds, yet as these examples show, they are not distinct categories, and virtual worlds inevitably mix fantasy and reality in complex ways.
Launch of the London Centre for Nanotechnology.
Aeppli, Gabriel; Pankhurst, Quentin
2006-12-01
Is nanomedicine an area with the promise that its proponents claim? Professors Gabriel Aeppli and Quentin Pankhurst explore the issues in light of the new London Centre for Nanotechnology (LCN)--a joint enterprise between Imperial College and University College London--opened on November 7, 2006. The center is a multidisciplinary research initiative that aims to bridge the physical, engineering and biomedical sciences. In this interview, Professor Gabriel Aeppli, LCN co-Director, and Deputy Director Professor Quentin Pankhurst discuss the advent and future role of the LCN with Nanomedicine's Morag Robertson. Professor Aeppli was formerly with NEC, Bell Laboratories and MIT and has more than 15 years' experience in the computer and telecommunications industry. Professor Pankhurst is a physicist with more than 20 years' experience of working with magnetic materials and nanoparticles, who now works closely with clinicians and medics on innovative healthcare applications. He also recently formed the new start-up company Endomagnetics Inc.
Validation of ground-motion simulations for historical events using SDoF systems
Galasso, C.; Zareian, F.; Iervolino, I.; Graves, R.W.
2012-01-01
The study presented in this paper is among the first in a series of studies toward the engineering validation of the hybrid broadband ground‐motion simulation methodology by Graves and Pitarka (2010). This paper provides a statistical comparison between seismic demands of single degree of freedom (SDoF) systems subjected to past events using simulations and actual recordings. A number of SDoF systems are selected considering the following: (1) 16 oscillation periods between 0.1 and 6 s; (2) elastic case and four nonlinearity levels, from mildly inelastic to severely inelastic systems; and (3) two hysteretic behaviors, in particular, nondegrading–nonevolutionary and degrading–evolutionary. Demand spectra are derived in terms of peak and cyclic response, as well as their statistics for four historical earthquakes: 1979 Mw 6.5 Imperial Valley, 1989 Mw 6.8 Loma Prieta, 1992 Mw 7.2 Landers, and 1994 Mw 6.7 Northridge.
Electrical Prototype Power Processor for the 30-cm Mercury electric propulsion engine
NASA Technical Reports Server (NTRS)
Biess, J. J.; Frye, R. J.
1978-01-01
An Electrical Prototpye Power Processor has been designed to the latest electrical and performance requirements for a flight-type 30-cm ion engine and includes all the necessary power, command, telemetry and control interfaces for a typical electric propulsion subsystem. The power processor was configured into seven separate mechanical modules that would allow subassembly fabrication, test and integration into a complete power processor unit assembly. The conceptual mechanical packaging of the electrical prototype power processor unit demonstrated the relative location of power, high voltage and control electronic components to minimize electrical interactions and to provide adequate thermal control in a vacuum environment. Thermal control was accomplished with a heat pipe simulator attached to the base of the modules.
NASA Astrophysics Data System (ADS)
Wilcox, Douglas A., Jr.
Micro combined heat and power or micro-CHP is the simultaneous generation of useful heat and electricity on a residential scale. The heat and electricity are produced at the point of use, avoiding the distribution losses associated with a centralized power plant. These appliances combine a conventional gas-fired condensing boiler with an electric power module capable of generating electricity from the heat of combustion. Currently, the leading power modules for micro-CHP appliances are free-piston Stirling engines (FPSEs) which can generate 1050 watts of electricity at a thermal-to-electric efficiency of 26%.[1] These external combustion engines have been under development for the last 25 years, with FPSE micro-CHP appliances only recently being introduced to the commercial market. Publications by developers assert unlimited service life and high efficiency, with low noise and emissions; but despite these claims, the actual reliability and cost of manufacturing has prevented their successful mass-market adoption. A Thermoacoustic-Stirling Engine Generator or TaSEG is one possible alternative to FPSE's. A TaSEG uses a thermoacoustic engine, or acoustic heat engine, which can efficiently convert high temperature heat into acoustic power while maintaining a simple design with fewer moving parts than traditional FPSE's. This simpler engine is coupled to an electrodynamic alternator capable of converting acoustic power into electricity. This thesis outlines the design, construction, and experimental evaluation of a TaSEG which is appropriate for integration with a gas burner inside of a residential micro- CHP appliance. The design methodology is discussed, focusing on how changes in the geometry affected the predicted performance. Details of its construction are given and the performance of the TaSEG is then outlined. The TaSEG can deliver 132 watts of electrical output power to an electric load with an overall measured thermal-to-electric (first law) efficiency of eta T-E=8.32%, corresponding to 14% of Carnot etac. The volumetric power density of this TaSEG is 8.9 kW/m3. While the demonstrated overall efficiency is modest (for reasons that are largely understood), this TaSEG has moved the technology away from laboratory prototypes toward a commercially viable power module having a design configuration suitable for implementation in a micro-CHP appliance. Based on the TaSEG's measured experimental performance results, recommendations for future work that might improve the overall efficiency of the TaSEG are also presented.
Electrical engineering support of telemetered traffic monitoring sites : final report, March 2009.
DOT National Transportation Integrated Search
2009-03-01
"The aim of this project was to provide electrical engineering support for the telemetered traffic monitoring sites (TTMS) operated by the Statistics Office of the Florida Department of Transportation. This project was a companion to project BD-543-1...
ERIC Educational Resources Information Center
Bolton, B.; Adderley, K. J.
1978-01-01
After viewing videotaped case studies indicating the relevance of electrical laboratory work to professional engineers, student attitudes showed a positive improvement toward laboratory work. Semantic differential tests, questionnaires, and interviews were used. (Author/MH)
Professional Adaptation of the Cuban Electrical Engineer in the U. S., 1959-69
ERIC Educational Resources Information Center
Moncarz, Raul
1972-01-01
An analysis of the re-adaptation of education and training brought to the U.S. by Cuban electrical engineers in an effort to discover which personal and occupational characteristics provided better adjustment to the new environment. (Author/PR)
The Computer-Job Salary Picture.
ERIC Educational Resources Information Center
Basta, Nicholas
1987-01-01
Discusses starting salaries for graduates with various degrees in computer science and electrical engineering. Summarizes the results of a recent study by the Institute of Electrical and Electronics Engineers (IEEE) which provides salary estimates for graduates in different specialties and in different geographical locations. (TW)
46 CFR 194.15-19 - Electrical.
Code of Federal Regulations, 2014 CFR
2014-10-01
....15-19 Electrical. (a) All electrical equipment located within 18 inches of the deck of the chemical laboratory shall be in accordance with the applicable requirements of Subchapter J (Electrical Engineering...
46 CFR 194.15-19 - Electrical.
Code of Federal Regulations, 2010 CFR
2010-10-01
....15-19 Electrical. (a) All electrical equipment located within 18 inches of the deck of the chemical laboratory shall be in accordance with the applicable requirements of Subchapter J (Electrical Engineering...
46 CFR 194.15-19 - Electrical.
Code of Federal Regulations, 2011 CFR
2011-10-01
....15-19 Electrical. (a) All electrical equipment located within 18 inches of the deck of the chemical laboratory shall be in accordance with the applicable requirements of Subchapter J (Electrical Engineering...
46 CFR 194.15-19 - Electrical.
Code of Federal Regulations, 2013 CFR
2013-10-01
....15-19 Electrical. (a) All electrical equipment located within 18 inches of the deck of the chemical laboratory shall be in accordance with the applicable requirements of Subchapter J (Electrical Engineering...
46 CFR 194.15-19 - Electrical.
Code of Federal Regulations, 2012 CFR
2012-10-01
....15-19 Electrical. (a) All electrical equipment located within 18 inches of the deck of the chemical laboratory shall be in accordance with the applicable requirements of Subchapter J (Electrical Engineering...
NASA Astrophysics Data System (ADS)
Tsukamoto, Takehiko; Nishizawa, Hitoshi
The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects, such as “electrical and electronic circuit" and “electromagnetism" more than 40 years. On the other hand, several issues of our college were clarified by the alumni's evaluation of the educational outcome in 2002. The most serious issue was low achievement of English and Social education. The alumni of all generation are dissatisfied with their low skill in English communication. As a part of the educational reforms, our department has constructed a new engineering education program focusing on fundamental ability. We introduced many problem-based-learning experiments and the compulsory subjects such as “English communication for electrical engineers" and “Engineering Ethics" into this program. Great educative results are obtained by these improvements. As a typical example, the scores of all 2nd grade students of advanced engineering course in TOEIC tests became 450 points or more. Our program has been authorized by JABEE since 2004.
NASA Astrophysics Data System (ADS)
Endryansyah; Wanarti Rusimamto, Puput; Ridianto, Adam; Sugiarto, Hariyadi
2018-04-01
In the Department of Electrical Engineering FT Unesa, there are 3 majors: S1 Electrical Engineering Education, S1 Electrical Engineering, and D3 Electrical Engineering. Courses the Basic System Settings go to in the curriculum of the three programs. Team lecturer college of basic system settings seek learning innovation, focused on the development of trainer to student practicum at the laboratory of systems control. Trainer developed is a servo motor along with the lab module that contains a wide variety of theories about the servo motor and guide the practicum. This research type is development research using methods Research & development (R & D). In which the steps are applied in this study is as follows: pay attention to the potential and existing problems, gather information and study the literature, design the product, validate the design, revise the design, a limited trial. The results of the validation of learning device in the form of modules and trainer obtained as follows: score validation of learning device is 3,64; score validation lab module Servo Motor is 3,47; and questionnaire responses of students is 3,73. The result of the whole validation value is located in the interval >of 3.25 s/d 4 with the category of “Very Valid”, so it can be concluded that all instruments have a level of validity “Very Valid” and worthy of use for further learning.
Army Net Zero Prove Out. Net Zero Energy Best Practices
2014-11-18
energy which is then used to drive a heat engine to generate electrical power. Geothermal Power – These systems use thermal energy generated and...stored in the earth as a generating source for electricity. Several pilot installations are investigating this technology by conducting geothermal ...concentrate solar thermal energy which is then used to drive a heat engine to generate electrical power. • Geothermal Power - These systems use thermal energy
High-Temperature Magnetic Bearings Being Developed for Gas Turbine Engines
NASA Technical Reports Server (NTRS)
Kascak, Albert F.
1998-01-01
Magnetic bearings are the subject of a new NASA Lewis Research Center and U.S. Army thrust with significant industry participation, and cooperation with other Government agencies. The NASA/Army emphasis is on high-temperature applications for future gas turbine engines. Magnetic bearings could increase the reliability and reduce the weight of these engines by eliminating the lubrication system. They could also increase the DN (diameter of bearing times the rpm) limit on engine speed and allow active vibration cancellation systems to be used, resulting in a more efficient, "more electric" engine. Finally, the Integrated High Performance Turbine Engine Technology (IHPTET) program, a joint Department of Defense/industry program, identified a need for a high-temperature (1200 F) magnetic bearing that could be demonstrated in their Phase III engine. This magnetic bearing is similar to an electric motor. It has a laminated rotor and stator made of cobalt steel. Wound around the stator's circumference are a series of electrical wire coils which form a series of electric magnets that exert a force on the rotor. A probe senses the position of the rotor, and a feedback controller keeps it centered in the cavity. The engine rotor, bearings, and casing form a flexible structure with many modes. The bearing feedback controller, which could cause some of these modes to become unstable, could be adapted to varying flight conditions to minimize seal clearances and monitor the health of the system.
NASA Astrophysics Data System (ADS)
Persaud, P.; Ma, Y.; Stock, J. M.; Hole, J. A.; Fuis, G. S.; Han, L.
2016-12-01
Ongoing oblique slip at the Pacific-North America plate boundary in the Salton Trough produced the Imperial Valley. Deformation in this seismically active area is distributed across a complex network of exposed and buried faults resulting in a largely unmapped seismic hazard beneath the growing population centers of El Centro, Calexico and Mexicali. To better understand the shallow crustal structure in this region and the connectivity of faults and seismicity lineaments, we used data primarily from the Salton Seismic Imaging Project (SSIP) to construct a P-wave velocity profile to 15 km depth, and a 3-D velocity model down to 8 km depth including the Brawley Geothermal area. We obtained detailed images of a complex wedge-shaped basin at the southern end of the San Andreas Fault system. Two deep subbasins (VP <5.65 km/s) are located in the western part of the larger Imperial Valley basin, where seismicity trends and active faults play a significant role in shaping the basin edge. Our 3-D VP model reveals previously unrecognized NE-striking cross faults that are interacting with the dominant NW-striking faults to control deformation. New findings in our profile include localized regions of low VP (thickening of a 5.65-5.85 km/s layer) near faults or seismicity lineaments interpreted as possibly faulting-related. Our 3-D model and basement map reveal velocity highs associated with the geothermal areas in the eastern valley. The improved seismic velocity model from this study, and the identification of important unmapped faults or buried interfaces will help refine the seismic hazard for parts of Imperial County, California.
[The geopolitics of tropical diseases: a geo-epidemiological perspective].
Lee, Jong-Chan
2005-12-01
The objective of my article is to investigate how the West had strong interest in tropical diseases and developed tropical medicine and hygiene from the 1870s through the 1910s. Its focus is to identify the geopolitical conditions in which the West constructed 'tropical diseases' to extend its imperial interests into non-Western tropical regions. The article has several specific research tasks: first, I attempt to explore the way in which European people transformed their attitudes toward tropical diseases from the sixteenth century to the 1860s. A variety of writings by European physicians are discussed; the second part shows European change in its domestic sanitary situation in relation to its imperial interests in tropical regions. Sanitary hygiene in metropole and colonies are not separate, but interconnected; third, the paper illuminates how the West responded to the spread of 'Asiatic cholera' in the nineteenth century. Cholera provides a typical example for the West to perceive Asian origin of tropical diseases; finally, the article demonstrates that hygienic governance of tropical diseases is the key to imperial dominion over colonies by taking the Panama Canal as an example. Although several European countries such as Spain, Britain, Germany, and France had strong imperial interests in the Panama Canal that might facilitate trade between the Atlantic and the Pacific, they failed to occupy the canal because of their inability to control high prevalence of malaria and yellow fever. Taking advantage of 'tropical medicine,' the United States succeeded in taking up the canal by eradicating tropical diseases in the canal. It was owing to the scientific development of tropical hygiene and medicine that the West transformed its pessimistic into optimistic position about the colonization of tropical regions. Tropical diseases became the geopolitical reference for Western conceptualization of Asia, Africa, Latin America, and the Pacific.
NASA Astrophysics Data System (ADS)
Donnellan, Andrea; Parker, Jay; Hensley, Scott; Pierce, Marlon; Wang, Jun; Rundle, John
2014-03-01
4 April 2010 M 7.2 El Mayor-Cucapah earthquake that occurred in Baja California, Mexico and terminated near the U.S. Mexican border caused slip on the Imperial, Superstition Hills, and East Elmore Ranch Faults. The pattern of slip was observed using radar interferometry from NASA's Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) instrument collected on 20-21 October 2009 and 12-13 April 2010. Right-lateral slip of 36 ± 9 and 14 ± 2 mm occurred on the Imperial and Superstition Hills Faults, respectively. Left-lateral slip of 9 ± 2 mm occurred on the East Elmore Ranch Fault. The widths of the zones of displacement increase northward suggesting successively more buried fault motion to the north. The observations show a decreasing pattern of slip northward on a series of faults in the Salton Trough stepping between the El Mayor-Cucapah rupture and San Andreas Fault. Most of the motion occurred at the time of the M 7.2 earthquake and the UAVSAR observations are consistent with field, creepmeter, GPS, and Envisat observations. An additional 28 ± 1 mm of slip at the southern end of the Imperial Fault over a <1 km wide zone was observed over a 1 day span a week after the earthquake suggesting that the fault continued to slip at depth following the mainshock. The total moment release on the three faults is 2.3 × 1023-1.2 × 1024 dyne cm equivalent to a moment magnitude release of 4.9-5.3, assuming shallow slip depths ranging from 1 to 5 km.
NASA Technical Reports Server (NTRS)
Barnett, John W.
1991-01-01
Nuclear propulsion technology offers substantial benefits to the ambitious piloted and robotic solar system exploration missions of the Space Exploration Initiative (SEI). This paper summarizes a workshop jointly sponsored by NASA, DoE, and DoD to assess candidate nuclear electric propulsion technologies. Twenty-one power and propulsion concepts are reviewed. Nuclear power concepts include solid and gaseous fuel concepts, with static and dynamic power conversion. Propulsion concepts include steady state and pulsed electromagnetic engines, a pulsed electrothermal engine, and a steady state electrostatic engine. The technologies vary widely in maturity. The workshop review panels concluded that compelling benefits would accrue from the development of nuclear electric propulsion systems, and that a focused, well-funded program is required to prepare the technologies for SEI missions.