Syntrophic growth of Desulfovibrio alaskensis requires genes for H2 and formate metabolism as well as those for flagellum and biofilm formation.

PubMed

Krumholz, Lee R; Bradstock, Peter; Sheik, Cody S; Diao, Yiwei; Gazioglu, Ozcan; Gorby, Yuri; McInerney, Michael J

2015-04-01

In anaerobic environments, mutually beneficial metabolic interactions between microorganisms (syntrophy) are essential for oxidation of organic matter to carbon dioxide and methane. Syntrophic interactions typically involve a microorganism degrading an organic compound to primary fermentation by-products and sources of electrons (i.e., formate, hydrogen, or nanowires) and a partner producing methane or respiring the electrons via alternative electron accepting processes. Using a transposon gene mutant library of the sulfate-reducing Desulfovibrio alaskensis G20, we screened for mutants incapable of serving as the electron-accepting partner of the butyrate-oxidizing bacterium, Syntrophomonas wolfei. A total of 17 gene mutants of D. alaskensis were identified as incapable of serving as the electron-accepting partner. The genes identified predominantly fell into three categories: membrane surface assembly, flagellum-pilus synthesis, and energy metabolism. Among these genes required to serve as the electron-accepting partner, the glycosyltransferase, pilus assembly protein (tadC), and flagellar biosynthesis protein showed reduced biofilm formation, suggesting that each of these components is involved in cell-to-cell interactions. Energy metabolism genes encoded proteins primarily involved in H2 uptake and electron cycling, including a rhodanese-containing complex that is phylogenetically conserved among sulfate-reducing Deltaproteobacteria. Utilizing an mRNA sequencing approach, analysis of transcript abundance in wild-type axenic and cocultures confirmed that genes identified as important for serving as the electron-accepting partner were more highly expressed under syntrophic conditions. The results imply that sulfate-reducing microorganisms require flagellar and outer membrane components to effectively couple to their syntrophic partners; furthermore, H2 metabolism is essential for syntrophic growth of D. alaskensis G20. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Syntrophic Growth of Desulfovibrio alaskensis Requires Genes for H2 and Formate Metabolism as Well as Those for Flagellum and Biofilm Formation

PubMed Central

Bradstock, Peter; Sheik, Cody S.; Diao, Yiwei; Gazioglu, Ozcan; Gorby, Yuri; McInerney, Michael J.

2015-01-01

In anaerobic environments, mutually beneficial metabolic interactions between microorganisms (syntrophy) are essential for oxidation of organic matter to carbon dioxide and methane. Syntrophic interactions typically involve a microorganism degrading an organic compound to primary fermentation by-products and sources of electrons (i.e., formate, hydrogen, or nanowires) and a partner producing methane or respiring the electrons via alternative electron accepting processes. Using a transposon gene mutant library of the sulfate-reducing Desulfovibrio alaskensis G20, we screened for mutants incapable of serving as the electron-accepting partner of the butyrate-oxidizing bacterium, Syntrophomonas wolfei. A total of 17 gene mutants of D. alaskensis were identified as incapable of serving as the electron-accepting partner. The genes identified predominantly fell into three categories: membrane surface assembly, flagellum-pilus synthesis, and energy metabolism. Among these genes required to serve as the electron-accepting partner, the glycosyltransferase, pilus assembly protein (tadC), and flagellar biosynthesis protein showed reduced biofilm formation, suggesting that each of these components is involved in cell-to-cell interactions. Energy metabolism genes encoded proteins primarily involved in H2 uptake and electron cycling, including a rhodanese-containing complex that is phylogenetically conserved among sulfate-reducing Deltaproteobacteria. Utilizing an mRNA sequencing approach, analysis of transcript abundance in wild-type axenic and cocultures confirmed that genes identified as important for serving as the electron-accepting partner were more highly expressed under syntrophic conditions. The results imply that sulfate-reducing microorganisms require flagellar and outer membrane components to effectively couple to their syntrophic partners; furthermore, H2 metabolism is essential for syntrophic growth of D. alaskensis G20. PMID:25616787

Synthesis of an A-D-A type of molecule used as electron acceptor for improving charge transfer in organic solar cells

NASA Astrophysics Data System (ADS)

Zhang, Chao-Zhi; Gu, Shu-Duo; Shen, Dan; Yuan, Yang; Zhang, Mingdao

2016-08-01

Electron-accepting molecules play an important role in developing organic solar cells. A new type of A-D-A molecule, 3,6-di([7-(5-bromothiophen-2-yl)-1,5,2,4,6,8-dithiotetrazocin-3-yl]thiophen-2-yl)-9-(2-ethylhexyl)carbazole, was synthesized. The lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels are -3.55 and -5.85 eV, respectively. Therefore, the A-D-A type of compound could be used as electron acceptor for fabricating organic solar cell with a high open circuit voltage. Gibbs free energy (-49.2 kJ/mol) reveals that the process of A-D-A acceptor accepting an electron from poly(3-hexylthiophene) at excited state is spontaneous. The value of entropy (118 J/mol) in the process of an electron transferring from P3HT to the A-D-A acceptor at organic interface suggests that electrons generated from separation of electron-hole pairs at donor/acceptor interface would be delocalized efficiently. Therefore, the A-D-A molecule would be a potential acceptor for efficient organic BHJ solar cells.

Enhanced metabolite generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chidambaram, Devicharan

The present invention relates to the enhanced production of metabolites by a process whereby a carbon source is oxidized with a fermentative microbe in a compartment having a portal. An electron acceptor is added to the compartment to assist the microbe in the removal of excess electrons. The electron acceptor accepts electrons from the microbe after oxidation of the carbon source. Other transfers of electrons can take place to enhance the production of the metabolite, such as acids, biofuels or brewed beverages.

Single-molecule interfacial electron transfer dynamics in solar energy conversion

NASA Astrophysics Data System (ADS)

Dhital, Bharat

This dissertation work investigated the parameters affecting the interfacial electron transfer (ET) dynamics in dye-semiconductor nanoparticles (NPs) system by using single-molecule fluorescence spectroscopy and imaging combined with electrochemistry. The influence of the molecule-substrate electronic coupling, the molecular structure, binding geometry on the surface and the molecule-attachment surface chemistry on interfacial charge transfer processes was studied on zinc porphyrin-TiO2 NP systems. The fluorescence blinking measurement on TiO2 NP demonstrated that electronic coupling regulates dynamics of charge transfer processes at the interface depending on the conformation of molecule on the surface. Moreover, semiconductor surface charge induced electronic coupling of molecule which is electrostatically adsorbed on the semiconductor surface also predominantly alters the ET dynamics. Furthermore, interfacial electric field and electron accepting state density dependent ET dynamics has been dissected in zinc porphyrin-TiO2 NP system by observing the single-molecule fluorescence blinking dynamics and fluorescence lifetime with and without applied bias. The significant difference in fluorescence fluctuation and lifetime suggested the modulation of charge transfer dynamics at the interface with external electric field perturbation. Quasi-continuous distribution of fluorescence intensity with applied negative potential was attributed to the faster charge recombination due to reduced density of electron accepting states. The driving force and electron accepting state density ET dependent dynamics has also been probed in zinc porphyrin-TiO2 NP and zinc porphyrin-indium tin oxide (ITO) systems. Study of a molecule adsorbed on two different semiconductors (ITO and TiO2), with large difference in electron densities and distinct driving forces, allows us to observe the changes in rates of back electron transfer process reflected by the suppressed fluorescence blinking of molecule on ITO surface. Finally, the electric field effect on the interface properties has been probed by using surface-enhanced Raman spectroscopy and supported by density functional theory calculations in alizarin-TiO2 system. The perturbation, created by the external potential, has been observed to cause a shift and/or splitting interfacial bond vibrational mode, typical indicator of the coupling energy changes between alizarin and TiO2. Such splitting provides evidence for electric field-dependent electronic coupling changes that have a significant impact on the interfacial electron transfer dynamics.

75 FR 32143 - Submission of Electronic Documentation With Comailed and Copalletized Mailings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... efficiency in the processing of copalletized mailings. The Postal Service can accept piece-level electronic...-size pieces in trays, which include pieces to be incorporated within a copalletized mailing, to prepare... statements for payment at the consolidator site. Consolidators of letter-size pieces in trays will also be...

Increased Electron-Accepting and Decreased Electron-Donating Capacities of Soil Humic Substances in Response to Increasing Temperature.

PubMed

Tan, Wenbing; Xi, Beidou; Wang, Guoan; Jiang, Jie; He, Xiaosong; Mao, Xuhui; Gao, Rutai; Huang, Caihong; Zhang, Hui; Li, Dan; Jia, Yufu; Yuan, Ying; Zhao, Xinyu

2017-03-21

The electron transfer capacities (ETCs) of soil humic substances (HSs) are linked to the type and abundance of redox-active functional moieties in their structure. Natural temperature can affect the chemical structure of natural organic matter by regulating their oxidative transformation and degradation in soil. However, it is unclear if there is a direct correlation between ETC of soil HS and mean annual temperature. In this study, we assess the response of the electron-accepting and -donating capacities (EAC and EDC) of soil HSs to temperature by analyzing HSs extracted from soil set along glacial-interglacial cycles through loess-palaeosol sequences and along natural temperature gradients through latitude and altitude transects. We show that the EAC and EDC of soil HSs increase and decrease, respectively, with increasing temperature. Increased temperature facilitates the prevalence of oxidative degradation and transformation of HS in soils, thus potentially promoting the preferentially oxidative degradation of phenol moieties of HS or the oxidative transformation of electron-donating phenol moieties to electron-accepting quinone moieties in the HS structure. Consequently, the EAC and EDC of HSs in soil increase and decrease, respectively. The results of this study could help to understand biogeochemical processes, wherein the redox functionality of soil organic matter is involved in the context of increasing temperature.

Predominant terminal electron accepting processes during organic matter degradation: Spatio-temporal changes in Ashtamudi estuary, Kerala, India

NASA Astrophysics Data System (ADS)

Vincent, Salom Gnana Thanga; Reshmi, R. R.; Hassan, S. Junaid; Nair, K. Deepa; Varma, Ajayakumar

2017-11-01

Anaerobic microbial communities in the anoxic zones degrade organic matter in estuarine sediments. Thermodynamic energy yield for the oxidation reactions with various electron acceptors decreases in the order of O2> NO3- > Mn4+> Fe3+> SO42- > CO2. The predominant terminal electron accepting (TEA) process has an influence on the biogeochemical cycles of nutrients as well as the production of important greenhouse gases such as nitrous oxide and methane from estuarine sediments. The research questions of this study were (1) what are the environmental factors (pH, salinity, organic carbon, sulphate, redox potential) explaining variability in TEA activities such as nitrate reduction rate (NRR), iron reduction rate (IRR), sulphate reduction rate (SRR) and methane production rate (MPR) and (2) which is the predominant TEA process during degradation of organic matter. To determine the TEA activities, sediment samples collected from 13 sampling stations of Ashtamudi estuary during monsoon 2014 and summer 2015 were incubated with sulphate depleted artificial seawater, under anaerobic conditions for 72 h, in microcosms. Spatial variations dominated temporal variations for environmental variables. Nevertheless, biogeochemical processes showed a distinct seasonal variation. Total TEA activity was higher during summer than monsoon, indicating the higher heterotrophic microbial activity favored by high temperature. Individually, SRR was the maximum during summer, while NRR, IRR and MPR were the maximum during monsoon. Sulphate reduction was observed to be the predominant electron accepting process in all sampling stations with cumulative values of 3125.79 and 4046.07 nmol cm-3 day-1 during monsoon and summer respectively. This was followed by NRR, IRR and MPR. Although thermodynamically more favorable, NRR could not predominate due to scarcity of nitrate in sediments. Nevertheless, two-fold and five-fold increase in methanogenesis and denitrification were observed respectively during monsoon in sampling stations, which cannot be ignored, owing to the importance of methane and nitrous oxide as a potent greenhouse gas.

Development of CPR security using impact analysis.

PubMed Central

Salazar-Kish, J.; Tate, D.; Hall, P. D.; Homa, K.

2000-01-01

The HIPAA regulations will require that institutions ensure the prevention of unauthorized access to electronically stored or transmitted patient records. This paper discusses a process for analyzing the impact of security mechanisms on users of computerized patient records through "behind the scenes" electronic access audits. In this way, those impacts can be assessed and refined to an acceptable standard prior to implementation. Through an iterative process of design and evaluation, we develop security algorithms that will protect electronic health information from improper access, alteration or loss, while minimally affecting the flow of work of the user population as a whole. PMID:11079984

Electron storage in single wall carbon nanotubes. Fermi level equilibration in semiconductor-SWCNT suspensions.

PubMed

Kongkanand, Anusorn; Kamat, Prashant V

2007-08-01

The use of single wall carbon nanotubes (SWCNTs) as conduits for transporting electrons in a photoelectrochemical solar cell and electronic devices requires better understanding of their electron-accepting properties. When in contact with photoirradiated TiO(2) nanoparticles, SWCNTs accept and store electrons. The Fermi level equilibration with photoirradiated TiO(2) particles indicates storage of up to 1 electron per 32 carbon atoms in the SWCNT. The stored electrons are readily discharged on demand upon addition of electron acceptors such as thiazine and oxazine dyes (reduction potential less negative than that of the SWCNT conduction band) to the TiO(2)-SWCNT suspension. The stepwise electron transfer from photoirradiated TiO(2) nanoparticles --> SWCNT --> redox couple has enabled us to probe the electron equilibration process and determine the apparent Fermi level of the TiO(2)-SWCNT system. A positive shift in apparent Fermi level (20-30 mV) indicates the ability of SWCNTs to undergo charge equilibration with photoirradiated TiO(2) particles. The dependence of discharge capacity on the reduction potential of the dye redox couple is compared for TiO(2) and TiO(2)-SWCNT systems under equilibration conditions.

31 CFR 321.25 - Payment and retention of definitive securities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... prohibited from accepting an image, or other copy or reproduction of the definitive security, for redemption or processing. To ensure that all transactions processed by agents are properly validated, agents... converted to an electronic image. At a minimum, the agent must retain such securities for a period of thirty...

31 CFR 321.25 - Payment and retention of definitive securities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... agent is prohibited from accepting an image, or other copy or reproduction of the definitive security, for redemption or processing. To ensure that all transactions processed by agents are properly... truncated and converted to an electronic image. At a minimum, the agent must retain such securities for a...

31 CFR 321.25 - Payment and retention of definitive securities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... prohibited from accepting an image, or other copy or reproduction of the definitive security, for redemption or processing. To ensure that all transactions processed by agents are properly validated, agents... converted to an electronic image. At a minimum, the agent must retain such securities for a period of thirty...

Electron beams in research and technology

NASA Astrophysics Data System (ADS)

Mehnert, R.

1995-11-01

Fast electrons lose their energy by inelastic collisions with electrons of target molecules forming secondary electrons and excited molecules. Coulomb interaction of secondary electrons with valence electrons of neighboring molecules leads to the formation of radical cations, thermalized electrons, excited molecular states and radicals. The primary reactive species initiate chemical reactions in the materials irradiated. Polymer modifications using accelerated electrons such as cross-linking of cable insulation, tubes, pipes and moldings, vulcanization of elastomers, grafting of polymer surfaces, processing of foamed plastics and heat shrinkable materials have gained wide industrial acceptance. A steadily growing electron beam technology is curing of paints, lacquers, printing inks and functional coatings. Electron beam processing offers high productivity, the possibility to treat the materials at normal temperature and pressure, excellent process control and clean production conditions. On an industrial scale the most important application of fast electrons is curing of 100% reactive monomer/prepolymer systems. Mainly acrylates and epoxides are used to formulate functional coatings on substrates such as paper, foil, wood, fibre board and high pressure laminates. A survey is given about the reaction mechanism of curing, the characterization of cured coatings, and of some industrial application.

Deducing the distribution of terminal electron-accepting processes in hydrologically diverse groundwater systems

USGS Publications Warehouse

Chapelle, Francis H.; McMahon, Peter B.; Dubrovsky, Neil M.; Fujii, Roger F.; Oaksford, Edward T.; Vroblesky, Don A.

1995-01-01

The distribution of microbially mediated terminal electron-accepting processes (TEAPs( was investigated in four hydrologically diverse groundwater systems by considering patterns of electron acceptor (nitrate, sulfate) consumption, intermediate product (hydrogen (H2)) concentrations, and final product (ferrous iron, sulfide, and methane) production. In each hydrologic system a determination of predominant TEAPs could be arrived at, but the level of confidence appropriate for each determination differed. In a portion of the lacustrine aquifer of the San Joaquin Valley, for example, all three indicators (sulfate concentrations decreasing, H2concentrations in the 1–2 nmol range, and sulfide concentrations increasing along flow paths identified sulfate reduction as the predominant TEAP, leading to a high degree of confidence in the determination. In portions of the Floridan aquifer and a petroleum hydrocarbon-contaminated aquifer, sulfate reduction and methanogenesis are indicated by production of sulfide and methane, and hydrogen oncentrations in the 1–4 nmol and 5–14 nmol range, respectively. However, because electron acceptor consumption could not be documented in these systems, less confidence is warranted in the TEAP determination. In the Black Creek aquifer, no pattern of sulfate consumption and sulfide production were observed, but H2 concentrations indicated sulfate reduction as the predominant TEAP. In this case, where just a single line of evidence is available, the least confidence in the TEAP diagnosis is justified. Because this methodology is based on measurable water chemistry parameters and upon the physiology of microbial electron transfer processes, it provides a better description of predominant redox processes in groundwater systems than more traditional Eh-based methods.

The electron donating capacity of biochar is dramatically underestimated

PubMed Central

Prévoteau, Antonin; Ronsse, Frederik; Cid, Inés; Boeckx, Pascal; Rabaey, Korneel

2016-01-01

Biochars have gathered considerable interest for agronomic and engineering applications. In addition to their high sorption ability, biochars have been shown to accept or donate considerable amounts of electrons to/from their environment via abiotic or microbial processes. Here, we measured the electron accepting (EAC) and electron donating (EDC) capacities of wood-based biochars pyrolyzed at three different highest treatment temperatures (HTTs: 400, 500, 600 °C) via hydrodynamic electrochemical techniques using a rotating disc electrode. EACs and EDCs varied with HTT in accordance with a previous report with a maximal EAC at 500 °C (0.4 mmol(e−).gchar−1) and a large decrease of EDC with HTT. However, while we monitored similar EAC values than in the preceding study, we show that the EDCs have been underestimated by at least 1 order of magnitude, up to 7 mmol(e−).gchar−1 for a HTT of 400 °C. We attribute this existing underestimation to unnoticed slow kinetics of electron transfer from biochars to the dissolved redox mediators used in the monitoring. The EDC of other soil organic constituents such as humic substances may also have been underestimated. These results imply that the redox properties of biochars may have a much bigger impact on soil biogeochemical processes than previously conjectured. PMID:27628746

SU-D-BRD-07: Evaluation of the Effectiveness of Statistical Process Control Methods to Detect Systematic Errors For Routine Electron Energy Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, S

2015-06-15

Purpose: To evaluate the ability of statistical process control methods to detect systematic errors when using a two dimensional (2D) detector array for routine electron beam energy verification. Methods: Electron beam energy constancy was measured using an aluminum wedge and a 2D diode array on four linear accelerators. Process control limits were established. Measurements were recorded in control charts and compared with both calculated process control limits and TG-142 recommended specification limits. The data was tested for normality, process capability and process acceptability. Additional measurements were recorded while systematic errors were intentionally introduced. Systematic errors included shifts in the alignmentmore » of the wedge, incorrect orientation of the wedge, and incorrect array calibration. Results: Control limits calculated for each beam were smaller than the recommended specification limits. Process capability and process acceptability ratios were greater than one in all cases. All data was normally distributed. Shifts in the alignment of the wedge were most apparent for low energies. The smallest shift (0.5 mm) was detectable using process control limits in some cases, while the largest shift (2 mm) was detectable using specification limits in only one case. The wedge orientation tested did not affect the measurements as this did not affect the thickness of aluminum over the detectors of interest. Array calibration dependence varied with energy and selected array calibration. 6 MeV was the least sensitive to array calibration selection while 16 MeV was the most sensitive. Conclusion: Statistical process control methods demonstrated that the data distribution was normally distributed, the process was capable of meeting specifications, and that the process was centered within the specification limits. Though not all systematic errors were distinguishable from random errors, process control limits increased the ability to detect systematic errors using routine measurement of electron beam energy constancy.« less

An introduction to computer forensics.

PubMed

Furneaux, Nick

2006-07-01

This paper provides an introduction to the discipline of Computer Forensics. With computers being involved in an increasing number, and type, of crimes the trace data left on electronic media can play a vital part in the legal process. To ensure acceptance by the courts, accepted processes and procedures have to be adopted and demonstrated which are not dissimilar to the issues surrounding traditional forensic investigations. This paper provides a straightforward overview of the three steps involved in the examination of digital media: Acquisition of data. Investigation of evidence. Reporting and presentation of evidence. Although many of the traditional readers of Medicine, Science and the Law are those involved in the biological aspects of forensics, I believe that both disciplines can learn from each other, with electronic evidence being more readily sought and considered by the legal community and the long, tried and tested scientific methods of the forensic community being shared and adopted by the computer forensic world.

Business Process Improvement Applied to Written Temporary Duty Travel Orders within the United States Air Force

DTIC Science & Technology

1993-12-01

Generally Accepted Process While neither DoD Directives nor USAF Regulations specify exact mandatory TDY order processing methods, most USAF units...functional input. Finally, TDY order processing functional experts at Hanscom, Los Angeles and McClellan AFBs provided inputs based on their experiences...current electronic auditing capabilities. 81 DTPS Initiative. This DFAS-initiated action to standardize TDY order processing throughout DoD is currently

A low-cost 3-D printed stethoscope connected to a smartphone.

PubMed

Aguilera-Astudillo, Carlos; Chavez-Campos, Marx; Gonzalez-Suarez, Alan; Garcia-Cordero, Jose L

2016-08-01

We demonstrate the fabrication of a digital stethoscope using a 3D printer and commercial off-the-shelf electronics. A chestpiece consists of an electret microphone embedded into the drum of a 3D printed chestpiece. An electronic dongle amplifies the signal from the microphone and reduces any external noise. It also adjusts the signal to the voltages accepted by the smartphones headset jack. A graphical user interface programmed in Android displays the signals processed by the dongle. The application also saves the processed signal and sends it to a physician.

Synthesis of Dual NIR Two-photon Absorptive [60]fullerenyl Multiadducts for Nonlinear Light-transmittance Reduction Application

DTIC Science & Technology

2014-11-01

INTRODUCTION Nonlinear optical characteristics of [60] fullerene -derived C60-(antenna)x nanostructure conjugates are based on excited singlet state...two-photon absorption (2PA) processes in the NIR region [3]. Fullerene cages exhibit high electronegativity and electron-accepting characteristics...photoenergy by the donor DPAF-Cn antenna was able to undergo efficient intramolecular electron- or energy-transfer to the fullerene acceptor moiety in

Technology Acceptance of Electronic Medical Records by Nurses

ERIC Educational Resources Information Center

Stocker, Gary

2010-01-01

The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

Risk-Based Tailoring of the Verification, Validation, and Accreditation/Acceptance Processes (Adaptation fondee sur le risque, des processus de verification, de validation, et d’accreditation/d’acceptation)

DTIC Science & Technology

2012-04-01

Systems Concepts and Integration SET Sensors and Electronics Technology SISO Simulation Interoperability Standards Organization SIW Simulation...conjunction with 2006 Fall SIW 2006 September SISO Standards Activity Committee approved beginning IEEE balloting 2006 October IEEE Project...019 published 2008 June Edinborough, UK Held in conjunction with 2008 Euro- SIW 2008 September Laurel, MD, US Work on Composite Model 2008 December

Collection efficiency and acceptance maps of electron detectors for understanding signal detection on modern scanning electron microscopy.

PubMed

Agemura, Toshihide; Sekiguchi, Takashi

2018-02-01

Collection efficiency and acceptance maps of typical detectors in modern scanning electron microscopes (SEMs) were investigated. Secondary and backscattered electron trajectories from a specimen to through-the-lens and under-the-lens detectors placed on an electron optical axis and an Everhart-Thornley detector mounted on a specimen chamber were simulated three-dimensionally. The acceptance maps were drawn as the relationship between the energy and angle of collected electrons under different working distances. The collection efficiency considering the detector sensitivity was also estimated for the various working distances. These data indicated that the acceptance maps and collection efficiency are keys to understand the detection mechanism and image contrast for each detector in the modern SEMs. Furthermore, the working distance is the dominant parameter because electron trajectories are drastically changed with the working distance.

Height Control and Deposition Measurement for the Electron Beam Free Form Fabrication (EBF3) Process

NASA Technical Reports Server (NTRS)

Hafley, Robert A. (Inventor); Seufzer, William J. (Inventor)

2017-01-01

A method of controlling a height of an electron beam gun and wire feeder during an electron freeform fabrication process includes utilizing a camera to generate an image of the molten pool of material. The image generated by the camera is utilized to determine a measured height of the electron beam gun relative to the surface of the molten pool. The method further includes ensuring that the measured height is within the range of acceptable heights of the electron beam gun relative to the surface of the molten pool. The present invention also provides for measuring a height of a solid metal deposit formed upon cooling of a molten pool. The height of a single point can be measured, or a plurality of points can be measured to provide 2D or 3D surface height measurements.

75 FR 75897 - Electronic Funds Transfer of Depository Taxes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... the Financial Management Service to discontinue the system that processes FTD coupons, the temporary... Financial Management Service (FMS) considered current market conditions. In the last 18 months, more than 100 financial institutions, large and small, have stopped accepting FTD coupons. In many states, few...

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Code of Federal Regulations, 2010 CFR

2010-04-01

... components and controls for acceptable electronic signatures? 73.11 Section 73.11 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Signatures § 73.11...

Introduction of an all-electronic administrative process for a major international pediatric surgical meeting.

PubMed

Applebaum, Harry; Boles, Kay; Atkinson, James B

2003-12-01

The administrative process for annual meetings is time consuming and increasingly costly when accomplished by traditional postal, fax, and telephone methods. The Pacific Association of Pediatric Surgeons introduced an all-electronic communication format for its 2002 annual meeting. Attendee acceptance and administrative and financial impact were evaluated. Interested physicians were directed to a Website containing detailed information and electronic forms. E-mail was used for the abstract selection and manuscript submission processes. Attendees were surveyed to evaluate the new format. Administrative costs for the new format were compared with estimated costs for a comparable traditionally managed meeting. Attendance was similar to that at previous US meetings. Eighty-two percent of respondents approved of the all-electronic format, although 48% believed a choice should remain. None suggested a complete return to the traditional format. Abstract and manuscript processing time was reduced substantially as were administrative costs (79.43 dollars savings per physician registrant). Adoption of an all-electronic annual meeting administrative process was associated with substantial cost reduction, increased efficiency, and excellent attendee satisfaction. This technology can help avoid increased registration fees while easing the burden on physician volunteers.

Development and implementation of an integrated EHR for Homecare Service: a South American experience.

PubMed

Aguilera Díaz, Jerónimo; Arias, Antonio Eduardo; Budalich, Cintia Mabel; Benítez, Sonia Elizabeth; López, Gastón; Borbolla, Damián; Plazzotta, Fernando; Luna, Daniel; de Quirós, Fernán González Bernaldo

2010-01-01

This paper describes the development and implementation of a web based electronic health record for the Homecare Service program in the Hospital Italiano de Buenos Aires. It reviews the process of the integration of the new electronic health record to the hospital information system, allowing physicians to access the clinical data repository from their Pc's at home and with the capability of consulting past and present history of the patient health care, order, tests, and referrals with others professionals trough the new Electronic Health Record. We also discuss how workflow processes were changed and improved for the physicians, nurses, and administrative personnel of the Homecare Services and the educational methods used to improve acceptance and adoption of these new technologies. We also briefly describe the validation of physicians and their field work with electronic signatures.

MICROFRACTURE SURFACE GEOCHEMISTRY AND ADHERENT MICROBIAL POPULATION METABOLISM IN TCE-CONTAMINATED COMPETENT BEDROCK

EPA Science Inventory

A TCE-contaminated competent bedrock site in Portsmouth, NH was used to determine if a relation existed between microfracture (MF) surface geochemistry and the ecology and metabolic activity of attached microbes relative to terminal electron accepting processes (TEAPs) and TCE bi...

Control of Electron Flow Direction in Photoexcited Cycloplatinated Complex Containing Conjugated Polymer-Single Walled Carbon Nanotube Hybrids.

PubMed

Xiong, Wenjuan; Du, Lili; Lo, Kin Cheung; Shi, Haiting; Takaya, Tomohisa; Iwata, Koichi; Chan, Wai Kin; Phillips, David Lee

2018-06-25

Conjugated polymers incorporated with cycloplatinated complexes (P1-Pt and P2-Pt) were used as dispersants for single walled carbon nanotubes (SWCNTs). Significant changes in the UV-vis absorption spectra were observed after the formation of the polymer/SWCNT hybrids. Molecular dynamics (MD) simulations revealed the presence of a strong interaction between the cycloplatinated complex moieties and the SWCNT surface. The photoinduced electron transfer processes in these hybrids were strongly dependent on the type of the comonomer unit. Upon photoexcitation, the excited P1-Pt donates electrons to the SWCNT, while P2-Pt accepts electrons from the photoexcited SWCNT. These observations were supported by results from Raman and femtosecond time-resolved transient absorption spectroscopy experiments. The strong electronic interaction between the Pt complexes and the SWCNT gives rise to a new hybrid system that has a controllable photo-induced electron transfer flow, which are important in regulating the charge transport processes SWCNT-based optoelectronic devices.

Role of Humic-Bound Iron as an Electron Transfer Agent in Dissimilatory Fe(III) Reduction

PubMed Central

Lovley, Derek R.; Blunt-Harris, Elizabeth L.

1999-01-01

The dissimilatory Fe(III) reducer Geobacter metallireducens reduced Fe(III) bound in humic substances, but the concentrations of Fe(III) in a wide range of highly purified humic substances were too low to account for a significant portion of the electron-accepting capacities of the humic substances. Furthermore, once reduced, the iron in humic substances could not transfer electrons to Fe(III) oxide. These results suggest that other electron-accepting moieties in humic substances, such as quinones, are the important electron-accepting and shuttling agents under Fe(III)-reducing conditions. PMID:10473447

78 FR 18429 - Cost Recovery for Permit Processing, Administration, and Enforcement

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... costs on to the general public. DATES: Electronic or written comments: OSM will accept written comments... portion of the financial costs for reviewing, administering, and enforcing permits from the general public... general public.'' This charge is designed ``to recover the full cost to the Federal Government for...

10 CFR 2.1011 - Management of electronic information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... participants shall make textual (or, where non-text, image) versions of their documents available on a web... of the following acceptable formats: ASCII, native word processing (Word, WordPerfect), PDF Normal, or HTML. (iv) Image files must be formatted as TIFF CCITT G4 for bi-tonal images or PNG (Portable...

10 CFR 2.1011 - Management of electronic information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... participants shall make textual (or, where non-text, image) versions of their documents available on a web... of the following acceptable formats: ASCII, native word processing (Word, WordPerfect), PDF Normal, or HTML. (iv) Image files must be formatted as TIFF CCITT G4 for bi-tonal images or PNG (Portable...

75 FR 4375 - Transmission Loading Relief Reliability Standard and Curtailment Priorities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... Site: http://www.ferc.gov . Documents created electronically using word processing software should be... ensure operation within acceptable reliability criteria. NERC Glossary of Terms Used in Reliability Standards at 19, available at http://www.nerc.com/files/Glossary_12Feb08.pdf (NERC Glossary). An...

Electronic cigarettes. A position statement of the forum of international respiratory societies.

PubMed

Schraufnagel, Dean E; Blasi, Francesco; Drummond, M Bradley; Lam, David C L; Latif, Ehsan; Rosen, Mark J; Sansores, Raul; Van Zyl-Smit, Richard

2014-09-15

Awareness and usage of electronic cigarettes has exponentially increased during the last few years, especially among young people and women in some countries. The rapid acceptance of electronic cigarettes may be attributed in part to the perception created by marketing and the popular press that they are safer than combustible cigarettes. To alert and advise policy makers about electronic cigarettes and their potential hazards. Using The Union's position paper on electronic cigarettes as the starting template, the document was written using an iterative process. Portions of the manuscript have been taken directly from the position papers of participating societies. Because electronic cigarettes generate less tar and carcinogens than combustible cigarettes, use of electronic cigarettes may reduce disease caused by those components. However, the health risks of electronic cigarettes have not been adequately studied. Studies looking at whether electronic cigarettes can aid smoking cessation have had inconsistent results. Moreover, the availability of electronic cigarettes may have an overall adverse health impact by increasing initiation and reducing cessation of combustible nicotine delivery products. The health and safety claims regarding electronic nicotine delivery devices should be subject to evidentiary review. The potential benefits of electronic cigarettes to an individual smoker should be weighed against potential harm to the population of increased social acceptability of smoking and use of nicotine, the latter of which has addictive power and untoward effects. As a precaution, electronic nicotine delivery devices should be restricted or banned until more information about their safety is available. If they are allowed, they should be closely regulated as medicines or tobacco products.

Operational parameters of an opto-electronic neural network employing fixed planar holographic interconnects

NASA Astrophysics Data System (ADS)

Keller, P. E.; Gmitro, A. F.

1993-07-01

A prototype neutral network system of multifaceted, planar interconnection holograms and opto-electronic neurons is analyzed. This analysis shows that a hologram fabricated with electron-beam lithography has the capacity to connect 6700 neuron outputs to 6700 neuron inputs, and that, the encoded synaptic weights have a precision of approximately 5 bits. Higher interconnection densities can be achieved by accepting a lower synaptic weight accuracy. For systems employing laser diodes at the outputs of the neurons, processing rates in the range of 45 to 720 trillion connections per second can potentially be achieved.

Spying on the neighbors' pool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xantheas, S. S.

2016-12-01

The structure and properties of the aqueous proton is of fundamental interest in many areas of chemistry and biology. Acids and bases are molecules that are able to transfer (donate / accept) a proton according to Brønsted and Lowry, a process that was further explained by Lewis in terms of changes in their electronic structure in an attempt to offer a generalization of the Arrhenius theory. Simple proton transfers or the ones coupled to an electron transfer determine speciation, valence and reactivity in aqueous media and explain electrochemical processes, while voltage-gated proton channels have severe implications to the function ofmore » a number of tissues and species.« less

The space shuttle payload planning working groups: Volume 9: Materials processing and space manufacturing

NASA Technical Reports Server (NTRS)

1973-01-01

The findings and recommendations of the Materials Processing and Space Manufacturing group of the space shuttle payload planning activity are presented. The effects of weightlessness on the levitation processes, mixture stability, and control over heat and mass transport in fluids are considered for investigation. The research and development projects include: (1) metallurgical processes, (2) electronic materials, (3) biological applications, and (4)nonmetallic materials and processes. Additional recommendations are provided concerning the allocation of payload space, acceptance of experiments for flight, flight qualification, and private use of the space shuttle.

Electronic health record acceptance by physicians: testing an integrated theoretical model.

PubMed

Gagnon, Marie-Pierre; Ghandour, El Kebir; Talla, Pascaline Kengne; Simonyan, David; Godin, Gaston; Labrecque, Michel; Ouimet, Mathieu; Rousseau, Michel

2014-04-01

Several countries are in the process of implementing an Electronic Health Record (EHR), but limited physicians' acceptance of this technology presents a serious threat to its successful implementation. The aim of this study was to identify the main determinants of physician acceptance of EHR in a sample of general practitioners and specialists of the Province of Quebec (Canada). We sent an electronic questionnaire to physician members of the Quebec Medical Association. We tested four theoretical models (Technology acceptance model (TAM), Extended TAM, Psychosocial Model, and Integrated Model) using path analysis and multiple linear regression analysis in order to identify the main determinants of physicians' intention to use the EHR. We evaluated the modifying effect of sociodemographic characteristics using multi-group analysis of structural weights invariance. A total of 157 questionnaires were returned. The four models performed well and explained between 44% and 55% of the variance in physicians' intention to use the EHR. The Integrated model performed the best and showed that perceived ease of use, professional norm, social norm, and demonstrability of the results are the strongest predictors of physicians' intention to use the EHR. Age, gender, previous experience and specialty modified the association between those determinants and intention. The proposed integrated theoretical model is useful in identifying which factors could motivate physicians from different backgrounds to use the EHR. Physicians who perceive the EHR to be easy to use, coherent with their professional norms, supported by their peers and patients, and able to demonstrate tangible results are more likely to accept this technology. Age, gender, specialty and experience should also be taken into account when developing EHR implementation strategies targeting physicians. Copyright © 2013 Elsevier Inc. All rights reserved.

A head-up display format for transport aircraft approach and landing

NASA Technical Reports Server (NTRS)

Bray, R. S.; Scott, B. C.

1981-01-01

An electronic flight-guidance display format was designed for use in evaluations of the collimated head-up display concept applied to transport aircraft landing. In the design process of iterative evaluation and modification, some general principles, or guidelines, applicable to electronic flight displays were suggested. The usefulness of an indication of instantaneous inertial flightpath was clearly demonstrated. Evaluator pilot acceptance of the unfamiliar display concepts was very positive when careful attention was given to indoctrination and training.

Event (error and near-miss) reporting and learning system for process improvement in radiation oncology.

PubMed

Mutic, Sasa; Brame, R Scott; Oddiraju, Swetha; Parikh, Parag; Westfall, Melisa A; Hopkins, Merilee L; Medina, Angel D; Danieley, Jonathan C; Michalski, Jeff M; El Naqa, Issam M; Low, Daniel A; Wu, Bin

2010-09-01

The value of near-miss and error reporting processes in many industries is well appreciated and typically can be supported with data that have been collected over time. While it is generally accepted that such processes are important in the radiation therapy (RT) setting, studies analyzing the effects of organized reporting and process improvement systems on operation and patient safety in individual clinics remain scarce. The purpose of this work is to report on the design and long-term use of an electronic reporting system in a RT department and compare it to the paper-based reporting system it replaced. A specifically designed web-based system was designed for reporting of individual events in RT and clinically implemented in 2007. An event was defined as any occurrence that could have, or had, resulted in a deviation in the delivery of patient care. The aim of the system was to support process improvement in patient care and safety. The reporting tool was designed so individual events could be quickly and easily reported without disrupting clinical work. This was very important because the system use was voluntary. The spectrum of reported deviations extended from minor workflow issues (e.g., scheduling) to errors in treatment delivery. Reports were categorized based on functional area, type, and severity of an event. The events were processed and analyzed by a formal process improvement group that used the data and the statistics collected through the web-based tool for guidance in reengineering clinical processes. The reporting trends for the first 24 months with the electronic system were compared to the events that were reported in the same clinic with a paper-based system over a seven-year period. The reporting system and the process improvement structure resulted in increased event reporting, improved event communication, and improved identification of clinical areas which needed process and safety improvements. The reported data were also useful for the evaluation of corrective measures and recognition of ineffective measures and efforts. The electronic system was relatively well accepted by personnel and resulted in minimal disruption of clinical work. Event reporting in the quarters with the fewest number of reported events, though voluntary, was almost four times greater than the most events reported in any one quarter with the paper-based system and remained consistent from the inception of the process through the date of this report. However, the acceptance was not universal, validating the need for improved education regarding reporting processes and systematic approaches to reporting culture development. Specially designed electronic event reporting systems in a radiotherapy setting can provide valuable data for process and patient safety improvement and are more effective reporting mechanisms than paper-based systems. Additional work is needed to develop methods that can more effectively utilize reported data for process improvement, including the development of standardized event taxonomy and a classification system for RT.

Trapped in imidazole: how to accumulate multiple photoelectrons on a black-absorbing ruthenium complex.

PubMed

Zedler, Linda; Kupfer, Stephan; de Moraes, Inês Rabelo; Wächtler, Maria; Beckert, Rainer; Schmitt, Michael; Popp, Jürgen; Rau, Sven; Dietzek, Benjamin

2014-03-24

Ruthenium dyes incorporating a 4H-imidazole chromophore as a ligand exhibit a spectrally broad absorption in the UV/Vis region. Furthermore, they show the ability to store two electrons within the 4H-imidazole ligand. These features render them promising molecular systems, for example, as inter- or intramolecular electron relays. To optimize the structures with respect to their electron-storage capability, it is crucial to understand the impact of structural changes accompanying photoinduced charge transfer in the electronic intermediates of multistep electron-transfer processes. The photophysical properties of these (reactive) intermediates might impact the function of the molecular systems quite substantially. However, the spectroscopic study of short-lived intermediates in stepwise multielectron-transfer processes is experimentally challenging. To this end, this contribution reports on the electrochemical generation of anions identical to intermediate structures and their spectroscopic characterization by in situ resonance Raman and UV/Vis spectroelectrochemistry and computational methods. Thereby, an efficient two-electron pathway to the 4H-imidazole electron-accepting ligand is identified. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Natural language processing and inference rules as strategies for updating problem list in an electronic health record.

PubMed

Plazzotta, Fernando; Otero, Carlos; Luna, Daniel; de Quiros, Fernan Gonzalez Bernaldo

2013-01-01

Physicians do not always keep the problem list accurate, complete and updated. To analyze natural language processing (NLP) techniques and inference rules as strategies to maintain completeness and accuracy of the problem list in EHRs. Non systematic literature review in PubMed, in the last 10 years. Strategies to maintain the EHRs problem list were analyzed in two ways: inputting and removing problems from the problem list. NLP and inference rules have acceptable performance for inputting problems into the problem list. No studies using these techniques for removing problems were published Conclusion: Both tools, NLP and inference rules have had acceptable results as tools for maintain the completeness and accuracy of the problem list.

Investigating Students' Usage and Acceptance of Electronic Books

ERIC Educational Resources Information Center

Sieche, Susan; Krey, Birte; Bastiaens, Theo

2013-01-01

The purpose of this study is to investigate students' usage and acceptance of electronic books. Factors correlating with students' attitude towards e-books were examined using the Technology Acceptance Model (Davis, Bagozzi, & Warshaw 1989). A questionnaire was administered online for students at University of Hagen. Results indicate that…

Insights into the redox components of dissolved organic matters during stabilization process.

PubMed

Yuan, Ying; Xi, Bei-Dou; He, Xiao-Song; Ma, Yan; Zhang, Hui; Li, Dan; Zhao, Xin-Yu

2018-05-01

The changes of dissolved organic matter (DOM) components during stabilization process play significant effects on its redox properties but are little reported. Composting is a stabilization process of DOM, during which both the components and electron transfer capacities (ETCs) of DOM change. The redox components within compost-derived DOM during the stabilization process are investigated in this study. The results show that compost-derived DOM contained protein-like, fulvic-like, and humic-like components. The protein-like component decreases during composting, whereas the fulvic- and humic-like components increase during the process. The electron-donating capacity (EDC), electron-accepting capacity (EAC), and ETC of compost-derived DOM all increase during composting but their correlations with the components presented significant difference. The humic-like components were the main functional component responsible for both EDC and ETC, whereas the protein- and fluvic-like components show negative effects with the EAC, EDC, and ETC, suggesting that the components within DOM have specific redox properties during the stabilization process. These findings are very meaningful for better understanding the geochemical behaviors of DOM in the environment.

10 CFR 2.1011 - Management of electronic information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... production and service: (i) The participants shall make textual (or, where non-text, image) versions of their... set and be in one of the following acceptable formats: ASCII, native word processing (Word, WordPerfect), PDF Normal, or HTML. (iv) Image files must be formatted as TIFF CCITT G4 for bi-tonal images or...

Moving Toward SCORM Compliant Content Production at Educational Software Company: Technical and Administrative Challenges

ERIC Educational Resources Information Center

Kultur, Can; Oytun, Erden; Cagiltay, Kursat; Ozden, M. Yasar; Kucuk, Mehmet Emin

2004-01-01

The Shareable Content Object Reference Model (SCORM) aims to standardize electronic course content, its packaging and delivery. Instructional designers and e-learning material producer organizations accept SCORM?s significant impact on instructional design/delivery process, however not much known about how such standards will be implemented to…

Origin of poor doping efficiency in solution processed organic semiconductors.

PubMed

Jha, Ajay; Duan, Hong-Guang; Tiwari, Vandana; Thorwart, Michael; Miller, R J Dwayne

2018-05-21

Doping is an extremely important process where intentional insertion of impurities in semiconductors controls their electronic properties. In organic semiconductors, one of the convenient, but inefficient, ways of doping is the spin casting of a precursor mixture of components in solution, followed by solvent evaporation. Active control over this process holds the key to significant improvements over current poor doping efficiencies. Yet, an optimized control can only come from a detailed understanding of electronic interactions responsible for the low doping efficiencies. Here, we use two-dimensional nonlinear optical spectroscopy to examine these interactions in the course of the doping process by probing the solution mixture of doped organic semiconductors. A dopant accepts an electron from the semiconductor and the two ions form a duplex of interacting charges known as ion-pair complexes. Well-resolved off-diagonal peaks in the two-dimensional spectra clearly demonstrate the electronic connectivity among the ions in solution. This electronic interaction represents a well resolved electrostatically bound state, as opposed to a random distribution of ions. We developed a theoretical model to recover the experimental data, which reveals an unexpectedly strong electronic coupling of ∼250 cm -1 with an intermolecular distance of ∼4.5 Å between ions in solution, which is approximately the expected distance in processed films. The fact that this relationship persists from solution to the processed film gives direct evidence that Coulomb interactions are retained from the precursor solution to the processed films. This memory effect renders the charge carriers equally bound also in the film and, hence, results in poor doping efficiencies. This new insight will help pave the way towards rational tailoring of the electronic interactions to improve doping efficiencies in processed organic semiconductor thin films.

Research ethics committee decision-making in relation to an efficient neonatal trial.

PubMed

Gale, C; Hyde, M J; Modi, N

2017-07-01

Randomised controlled trials, a gold-standard approach to reduce uncertainties in clinical practice, are growing in cost and are often slow to recruit. We determined whether methodological approaches to facilitate large, efficient clinical trials were acceptable to UK research ethics committees (RECs). We developed a protocol in collaboration with parents, for a comparative-effectiveness, randomised controlled trial comparing two widely used blood transfusion practices in preterm infants. We incorporated four approaches to improve recruitment and efficiency: (i) point-of-care design using electronic patient records for patient identification, randomisation and data acquisition, (ii) short two-page information sheet; (iii) explicit mention of possible inclusion benefit; (iv) opt-out consent with enrolment as the default. With the support of the UK Health Research Authority, we submitted an identical protocol to 12 UK REC. RECs in the UK. Number of REC granting favourable opinions. The use of electronic patient records was acceptable to all RECs; one REC raised concerns about the short parent information sheet, 10 about inclusion benefit and 9 about opt-out consent. Following responses to queries, nine RECs granted a favourable final opinion and three rejected the application because they considered the opt-out consent process invalid. A majority of RECs in this study consider the use of electronic patient record data, short information sheets, opt-out consent and mention of possible inclusion benefit to be acceptable in neonatal comparative-effectiveness research. We identified a need for guidance for RECs in relation to opt-out consent processes. These methods provide opportunity to facilitate large randomised controlled trials. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Day of the week effect in paper submission/acceptance/rejection to/in/by peer review journals. II. An ARCH econometric-like modeling

NASA Astrophysics Data System (ADS)

Ausloos, Marcel; Nedic, Olgica; Dekanski, Aleksandar; Mrowinski, Maciej J.; Fronczak, Piotr; Fronczak, Agata

2017-02-01

This paper aims at providing a statistical model for the preferred behavior of authors submitting a paper to a scientific journal. The electronic submission of (about 600) papers to the Journal of the Serbian Chemical Society has been recorded for every day from Jan. 01, 2013 till Dec. 31, 2014, together with the acceptance or rejection paper fate. Seasonal effects and editor roles (through desk rejection and subfield editors) are examined. An ARCH-like econometric model is derived stressing the main determinants of the favorite day-of-week process.

Reduced Effectiveness of Interruptive Drug-Drug Interaction Alerts after Conversion to a Commercial Electronic Health Record.

PubMed

Wright, Adam; Aaron, Skye; Seger, Diane L; Samal, Lipika; Schiff, Gordon D; Bates, David W

2018-05-15

Drug-drug interaction (DDI) alerts in electronic health records (EHRs) can help prevent adverse drug events, but such alerts are frequently overridden, raising concerns about their clinical usefulness and contribution to alert fatigue. To study the effect of conversion to a commercial EHR on DDI alert and acceptance rates. Two before-and-after studies. 3277 clinicians who received a DDI alert in the outpatient setting. Introduction of a new, commercial EHR and subsequent adjustment of DDI alerting criteria. Alert burden and proportion of alerts accepted. Overall interruptive DDI alert burden increased by a factor of 6 from the legacy EHR to the commercial EHR. The acceptance rate for the most severe alerts fell from 100 to 8.4%, and from 29.3 to 7.5% for medium severity alerts (P < 0.001). After disabling the least severe alerts, total DDI alert burden fell by 50.5%, and acceptance of Tier 1 alerts rose from 9.1 to 12.7% (P < 0.01). Changing from a highly tailored DDI alerting system to a more general one as part of an EHR conversion decreased acceptance of DDI alerts and increased alert burden on users. The decrease in acceptance rates cannot be fully explained by differences in the clinical knowledge base, nor can it be fully explained by alert fatigue associated with increased alert burden. Instead, workflow factors probably predominate, including timing of alerts in the prescribing process, lack of differentiation of more and less severe alerts, and features of how users interact with alerts.

Hard and soft acids and bases: structure and process.

PubMed

Reed, James L

2012-07-05

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.

Optical modulator system

NASA Technical Reports Server (NTRS)

Brand, J.

1972-01-01

The fabrication, test, and delivery of an optical modulator system which will operate with a mode-locked Nd:YAG laser indicating at either 1.06 or 0.53 micrometers is discussed. The delivered hardware operates at data rates up to 400 Mbps and includes a 0.53 micrometer electrooptic modulator, a 1.06 micrometer electrooptic modulator with power supply and signal processing electronics with power supply. The modulators contain solid state drivers which accept digital signals with MECL logic levels, temperature controllers to maintain a stable thermal environment for the modulator crystals, and automatic electronic compensation to maximize the extinction ratio. The modulators use two lithium tantalate crystals cascaded in a double pass configuration. The signal processing electronics include encoding electronics which are capable of digitizing analog signals between the limit of + or - 0.75 volts at a maximum rate of 80 megasamples per second with 5 bit resolution. The digital samples are serialized and made available as a 400 Mbps serial NRZ data source for the modulators. A pseudorandom (PN) generator is also included in the signal processing electronics. This data source generates PN sequences with lengths between 31 bits and 32,767 bits in a serial NRZ format at rates up to 400 Mbps.

Fraction of Electrons Consumed in Electron Acceptor Reduction and Hydrogen Thresholds as Indicators of Halorespiratory Physiology

PubMed Central

Löffler, Frank E.; Tiedje, James M.; Sanford, Robert A.

1999-01-01

Measurements of the hydrogen consumption threshold and the tracking of electrons transferred to the chlorinated electron acceptor (fe) reliably detected chlororespiratory physiology in both mixed cultures and pure cultures capable of using tetrachloroethene, cis-1,2-dichloroethene, vinyl chloride, 2-chlorophenol, 3-chlorobenzoate, 3-chloro-4-hydroxybenzoate, or 1,2-dichloropropane as an electron acceptor. Hydrogen was consumed to significantly lower threshold concentrations of less than 0.4 ppmv compared with the values obtained for the same cultures without a chlorinated compound as an electron acceptor. The fe values ranged from 0.63 to 0.7, values which are in good agreement with theoretical calculations based on the thermodynamics of reductive dechlorination as the terminal electron-accepting process. In contrast, a mixed methanogenic culture that cometabolized 3-chlorophenol exhibited a significantly lower fe value, 0.012. PMID:10473415

Effect of redox conditions on MTBE biodegradation in surface water Sediments

USGS Publications Warehouse

Bradley, P.M.; Chapelle, F.H.; Landmeyer, J.E.

2001-01-01

Microbial degradation of methyl tert-butyl ether (MTBE) was observed in surface water-sediment microcosms under anaerobic conditions. The efficiency and products of anaerobic MTBE biodegradation were dependent on the predominant terminal electron-accepting conditions. In the presence of substantial methanogenic activity, MTBE biodegradation was nominal and involved reduction of MTBE to the toxic product, tert-butyl alcohol (TBA). In the absence of significant methanogenic activity, accumulation of [14C]TBA generally decreased, and mineralization of [U-14C]MTBE to 14CO2 generally increased as the oxidative potential of the predominant terminal electron acceptor increased in the order of SO4, Fe(III), Mn(IV) < NO3 < O2. Microbial mineralization of MTBE to CO2 under Mn(IV)or SO4-reducing conditions has not been reported previously. The results of this study indicate that microorganisms inhabiting the sediments of streams and lakes can degrade MTBE effectively under a range of anaerobic terminal electron-accepting conditions. Thus, anaerobic bed sediment microbial processes may provide a significant environmental sink for MTBE in surface water systems throughout the United States.

The relationship between resident burnout and safety-related and acceptability-related quality of healthcare: a systematic literature review.

PubMed

Dewa, Carolyn S; Loong, Desmond; Bonato, Sarah; Trojanowski, Lucy; Rea, Margaret

2017-11-09

There has been increasing interest in examining the relationship between physician wellbeing and quality of patient care. However, few reviews have specifically focused on resident burnout and quality of patient care. The purpose of this systematic literature review of the current scientific literature is to address the question, "How does resident burnout affect the quality of healthcare related to the dimensions of acceptability and safety?" This systematic literature review uses a multi-step screening process of publicly available peer-reviewed studies from five electronic databases: (1) Medline Current, (2) Medline In-process, (3) PsycINFO, (4) Embase, and (5) Web of Science. The electronic literature search resulted in the identification of 4638 unique citations. Of these, 10 articles were included in the review. Studies were assessed for risk of bias. Of the 10 studies that met the inclusion criteria, eight were conducted in the US, one in The Netherlands, and one in Mexico. Eight of the 10 studies focused on patient safety. The results of these included studies suggest there is moderate evidence that burnout is associated with patient safety (i.e., resident self-perceived medical errors and sub-optimal care). There is less evidence that specific dimensions of burnout are related to acceptability (i.e., quality of care, communication with patients). The results of this systematic literature review suggest a relationship between patient safety and burnout. These results potentially have important implications for the medical training milieu because residents are still in training and at the same time are asked to teach students. The results also indicate a need for more evidence-based interventions that support continued research examining quality of care measures, especially as they relate to acceptability.

15 CFR 700.13 - Acceptance and rejection of rated orders.

Code of Federal Regulations, 2010 CFR

2010-01-01

... order and transmit the acceptance or rejection in writing (hard copy), or in electronic format, within... rejection, pursuant to paragraphs (b) and (c) of this section, in writing (hard copy) or electronic format...

User acceptance of mobile health services from users' perspectives: The role of self-efficacy and response-efficacy in technology acceptance.

PubMed

Zhang, Xiaofei; Han, Xiaocui; Dang, Yuanyuan; Meng, Fanbo; Guo, Xitong; Lin, Jiayue

2017-03-01

With the swift emergence of electronic medical information, the global popularity of mobile health (mHealth) services continues to increase steadily. This study aims to investigate the efficacy factors that directly or indirectly influence individuals' acceptance of mHealth services. Based on the technology acceptance model, this research incorporates efficacy factors into the acceptance decision process. A research model was proposed involving the direct and indirect effects of self-efficacy and response-efficacy on acceptance intention, along with their moderating effects. The model and hypotheses were validated using data collected from a field survey of 650 potential service users. The results reveal that: (1) self-efficacy and response-efficacy are both positively associated with perceived ease of use; and (2) self-efficacy and response-efficacy moderate the impact of perceived usefulness toward adoption intention. Self-efficacy and response-efficacy both play an important role in individuals' acceptance of mHealth services, which not only affect their perceived ease of use of mHealth services, but also positively moderate the effects of perceived usefulness on adoption intention. Our findings serve to provide recommendations that are specifically customized for mHealth service providers and their marketers.

Ecoupling server: A tool to compute and analyze electronic couplings.

PubMed

Cabeza de Vaca, Israel; Acebes, Sandra; Guallar, Victor

2016-07-05

Electron transfer processes are often studied through the evaluation and analysis of the electronic coupling (EC). Since most standard QM codes do not provide readily such a measure, additional, and user-friendly tools to compute and analyze electronic coupling from external wave functions will be of high value. The first server to provide a friendly interface for evaluation and analysis of electronic couplings under two different approximations (FDC and GMH) is presented in this communication. Ecoupling server accepts inputs from common QM and QM/MM software and provides useful plots to understand and analyze the results easily. The web server has been implemented in CGI-python using Apache and it is accessible at http://ecouplingserver.bsc.es. Ecoupling server is free and open to all users without login. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

The market of electrical and electronic equipment waste in Portugal: Analysis of take-back consumers' decisions.

PubMed

Botelho, Anabela; Ferreira Dias, Marta; Ferreira, Carla; Pinto, Lígia M Costa

2016-10-01

This paper aims to ascertain the efficacy and acceptability of five incentive schemes for the take-back of waste electrical and electronic equipment in Portugal, focusing in consumers' perspectives. It assesses users' perception of these items, evaluating the motivations and interests they have concerning the market of waste electrical and electronic equipment. Results indicate, on one hand, a lack of awareness by consumers about the process of take-back of their equipment. On the other hand, results show that information conditions and socio-demographic factors affect consumers' motivations for returning the electrical and electronic equipment at the end of life. In this context, it can be concluded that, in Portugal, the market for the recovery of waste electrical and electronic equipment is still in its infancy. © The Author(s) 2016.

An electron linac-based system for BNCT of shallow tumors

NASA Astrophysics Data System (ADS)

Farhad Masoudi, S.; Ghiasi, Hedieh; Harif, Maryam; Rasouli, Fatemeh S.

2018-07-01

Although BNCT has been in existence since the 1950s, it continues to be of special significant and interest for wide groups of researchers. Recent studies, focused on investigating appropriate neutron sources as alternatives for nuclear reactors, revealed the high potential of electron linac-based facilities to improve the efficiency of this treatment method. The present simulation study has been devoted to both designing an optimized and geometrically simple target to be used as a photoneutron source based on an electron linac and designing a configuration composed of arrangement of materials to generate an appropriate beam for BNCT of shallow tumors considering the widely accepted criteria for pre-clinical survey. It has been found that the behavior of photoneutrons' current and their average energy on the surface of the target is independent of the incident energy. Accordingly, we managed to present a formula to predict the average energy of photoneutrons knowing the electron energy to an acceptable approximation avoiding Monte Carlo simulations. Considering the conflict between the beam intensity and its purity in the whole beam designing process, an optimized beam shaping assembly for electron linac of 18 MeV/ mA has been proposed. These results in essence confirm the ability of these sources for BNCT of shallow tumors and are therefore encouraging for further studies. Furthermore, the results show that this configuration, which the corresponding beam fulfills all the medical requirements, is also usable for electron linacs of other energies. This can be of high importance in practical point of view.

Electron transfer capacity dependence of quinone-mediated Fe(III) reduction and current generation by Klebsiella pneumoniae L17.

PubMed

Li, Xiaomin; Liu, Liang; Liu, Tongxu; Yuan, Tian; Zhang, Wei; Li, Fangbai; Zhou, Shungui; Li, Yongtao

2013-06-01

Quinone groups in exogenous electron shuttles can accelerate extracellular electron transfer (EET) from bacteria to insoluble terminal electron acceptors, such as Fe(III) oxides and electrodes, which are important in biogeochemical redox processes and microbial electricity generation. However, the relationship between quinone-mediated EET performance and electron-shuttling properties of the quinones remains incompletely characterized. This study investigates the effects of a series of synthetic quinones (SQs) on goethite reduction and current generation by a fermenting bacterium Klebsiella pneumoniae L17. In addition, the voltammetric behavior and electron transfer capacities (ETCs) of SQ, including electron accepting (EAC) and donating (EDC) capacities, is also examined using electrochemical methods. The results showed that SQ can significantly increase both the Fe(III) reduction rates and current outputs of L17. Each tested SQ reversibly accepted and donated electrons as indicated by the cyclic voltammograms. The EAC and EDC results showed that Carmine and Alizarin had low relative capacities of electron transfer, whereas 9,10-anthraquinone-2,6-disulfonic acid (AQDS), 2-hydroxy-1,4-naphthoquinone (2-HNQ), and 5-hydroxy-1,4-naphthoquinone (5-HNQ) showed stronger relative ETC, and 9,10-anthraquinone-2-carboxylic acid (AQC) and 9,10-anthraquinone-2-sulfonic acid (AQS) had high relative ETC. Enhancement of microbial goethite reduction kinetics and current outputs by SQ had a good linear relationship with their ETC, indicating that the effectiveness of quinone-mediated EET may be strongly dependent on the ETC of the quinones. Therefore, the presence of quinone compounds and fermenting microorganisms may increase the diversity of microbial populations that contribute to element transformation in natural environments. Moreover, ETC determination of different SQ would help to evaluate their performance for microbial EET under anoxic conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Processing of fullerene-single wall carbon nanotube complex for bulk heterojunction photovoltaic cells

NASA Astrophysics Data System (ADS)

Li, Cheng; Mitra, Somenath

2007-12-01

A fullerene-single wall carbon nanotube (C60-SWCNT) complex is used as a component of the photoactive layer in bulk heterojunction photovoltaic cells. This complex synthesized by microwave-assisted reaction takes advantage of the electron accepting feature of C60 and the high electron transport capability of SWCNTs. In this paper, quantum efficiency enhancement by increasing light absorption and by bringing about appropriate morphological rearrangements via solvent vapor treatment and thermal annealing is presented. The optimum combination of these steps led to an increase in efficiency by as much as 87.5%.

Clinical and Para Clinical Information Needs of Infertility Electronic Health Records in Iran: A Delphi Study.

PubMed

Farzandipour, Mehrdad; Jeddi, Fateme Rangraz; Gilasi, Hamid Reza; Shirzadi, Diana

2017-09-01

infertility is referred to the person's inability to conceive pregnancy after one year of intercourse without using protection. This study paves the ground for creating a complete, united, and coherent source of patients' medical information. this is an applied research of descriptive-cross sectional type which has been carried out through qualitative - quantitative methods. The sample of the present study was 50 specialists in the field of infertility which has been chosen based on purposive sampling method. Designing the questionnaire was done based on library studies and Gathering experts' views was done based on Delphi technique. 261 items from clinical and Para clinical information of infertile patients' electronic health records were subjected to an opinion poll by experts. During this process 223 items were accepted and 38 items have been rejected after two sessions of surveys by infertility experts. Para clinical information section consisted of 57 items that all of them have been accepted by the experts. Also, clinical information section consisted of 242 items from which 204 items were accepted and 38 items were rejected by the experts. existence of a structured electronic record system of infertile patients' information leads to the integration of patients' information, improvement of health care services and a decrease in treatment costs: all working to increase information safety. Furthermore, only essential and relevant information would be provided for the specialists and it will facilitate and direct the future infertility related studies due to the coherence, unity and relevance of the information.

Electronic adherence monitoring device performance and patient acceptability: a randomized control trial.

PubMed

Chan, Amy Hai Yan; Stewart, Alistair William; Harrison, Jeff; Black, Peter Nigel; Mitchell, Edwin Arthur; Foster, Juliet Michelle

2017-05-01

To investigate the performance and patient acceptability of an inhaler electronic monitoring device in a real-world childhood asthma population. Children 6 to 15 years presenting with asthma to the hospital emergency department and prescribed inhaled corticosteroids were included. Participants were randomized to receive a device with reminder features enabled or disabled for use with their preventer. Device quality control tests were conducted. Questionnaires on device acceptability, utility and ergonomics were completed at six months. A total of 1306 quality control tests were conducted; 84% passed pre-issue and 87% return testing. The most common failure reason was actuation under-recording. Acceptability scores were high, with higher scores in the reminder than non-reminder group (median, 5 th -95 th percentile: 4.1, 3.1-5.0 versus 3.7, 2.3-4.8; p < 0.001). Most (>90%) rated the device easy to use. Feedback was positive across five themes: device acceptability, ringtone acceptability, suggestions for improvement, effect on medication use, and effect on asthma control. This study investigates electronic monitoring device performance and acceptability in children using quantitative and qualitative measures. Results indicate satisfactory reliability, although failure rates of 13-16% indicate the importance of quality control. Favorable acceptability ratings support the use of these devices in children.

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2010 CFR

2010-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2011 CFR

2011-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2013 CFR

2013-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2014 CFR

2014-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2012 CFR

2012-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

Helping Students to Recognize and Evaluate an Assumption in Quantitative Reasoning: A Basic Critical-Thinking Activity with Marbles and Electronic Balance

ERIC Educational Resources Information Center

Slisko, Josip; Cruz, Adrian Corona

2013-01-01

There is a general agreement that critical thinking is an important element of 21st century skills. Although critical thinking is a very complex and controversial conception, many would accept that recognition and evaluation of assumptions is a basic critical-thinking process. When students use simple mathematical model to reason quantitatively…

Methodology for Physics and Engineering of Reliable Products

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Gibbel, Mark

1996-01-01

Physics of failure approaches have gained wide spread acceptance within the electronic reliability community. These methodologies involve identifying root cause failure mechanisms, developing associated models, and utilizing these models to inprove time to market, lower development and build costs and higher reliability. The methodology outlined herein sets forth a process, based on integration of both physics and engineering principles, for achieving the same goals.

Hydrogenation of Organic Matter as a Terminal Electron Sink Sustains High CO 2 :CH 4 Production Ratios During Anaerobic Decomposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Rachel M.; Tfaily, Malak M.; Rich, Virginia I.

Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO 2 and CH 4 for each molecule of organic matter degraded. However, CO 2:CH 4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO 2 has an oxidationmore » state of +4, if CH 4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO 2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO 2:CH 4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. In conclusion, this mechanism for CO 2 generation without concomitant CH 4 production has the potential to regulate the global warming potential of peatlands by elevating CO 2:CH 4 production ratios.« less

Hydrogenation of Organic Matter as a Terminal Electron Sink Sustains High CO 2 :CH 4 Production Ratios During Anaerobic Decomposition

DOE PAGES

Wilson, Rachel M.; Tfaily, Malak M.; Rich, Virginia I.; ...

2017-07-03

Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO 2 and CH 4 for each molecule of organic matter degraded. However, CO 2:CH 4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO 2 has an oxidationmore » state of +4, if CH 4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO 2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO 2:CH 4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. In conclusion, this mechanism for CO 2 generation without concomitant CH 4 production has the potential to regulate the global warming potential of peatlands by elevating CO 2:CH 4 production ratios.« less

Hydrogenation of organic matter as a terminal electron sink sustains high CO 2 :CH 4 production ratios during anaerobic decomposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Rachel M.; Tfaily, Malak M.; Rich, Virginia I.

Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO2 and CH4 for each molecule of organic matter degraded. However, CO2:CH4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO2 has an oxidation state of +4, if CH4more » (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO2:CH4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. This mechanism for CO2 generation without concomitant CH4 production has the potential to regulate the global warming potential of peatlands by elevating CO2:CH4 production ratios.« less

Electron Tunneling in Lithium Ammonia Solutions Probed by Frequency-Dependent Electron-Spin Relaxation Studies

PubMed Central

Maeda, Kiminori; Lodge, Matthew T.J.; Harmer, Jeffrey; Freed, Jack H.; Edwards, Peter P.

2012-01-01

Electron transfer or quantum tunneling dynamics for excess or solvated electrons in dilute lithium-ammonia solutions have been studied by pulse electron paramagnetic resonance (EPR) spectroscopy at both X- (9.7 GHz) and W-band (94 GHz) frequencies. The electron spin-lattice (T1) and spin-spin (T2) relaxation data indicate an extremely fast transfer or quantum tunneling rate of the solvated electron in these solutions which serves to modulate the hyperfine (Fermi-contact) interaction with nitrogen nuclei in the solvation shells of ammonia molecules surrounding the localized, solvated electron. The donor and acceptor states of the solvated electron in these solutions are the initial and final electron solvation sites found before, and after, the transfer or tunneling process. To interpret and model our electron spin relaxation data from the two observation EPR frequencies requires a consideration of a multi-exponential correlation function. The electron transfer or tunneling process that we monitor through the correlation time of the nitrogen Fermi-contact interaction has a time scale of (1–10)×10−12 s over a temperature range 230–290K in our most dilute solution of lithium in ammonia. Two types of electron-solvent interaction mechanisms are proposed to account for our experimental findings. The dominant electron spin relaxation mechanism results from an electron tunneling process characterized by a variable donor-acceptor distance or range (consistent with such a rapidly fluctuating liquid structure) in which the solvent shell that ultimately accepts the transferring electron is formed from random, thermal fluctuations of the liquid structure in, and around, a natural hole or Bjerrum-like defect vacancy in the liquid. Following transfer and capture of the tunneling electron, further solvent-cage relaxation with a timescale of ca. 10−13 s results in a minor contribution to the electron spin relaxation times. This investigation illustrates the great potential of multi-frequency EPR measurements to interrogate the microscopic nature and dynamics of ultra fast electron transfer or quantum-tunneling processes in liquids. Our results also impact on the universal issue of the role of a host solvent (or host matrix, e.g. a semiconductor) in mediating long-range electron transfer processes and we discuss the implications of our results with a range of other materials and systems exhibiting the phenomenon of electron transfer. PMID:22568866

Numerical simulation of ion charge breeding in electron beam ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, L., E-mail: zhao@far-tech.com; Kim, Jin-Soo

2014-02-15

The Electron Beam Ion Source particle-in-cell code (EBIS-PIC) tracks ions in an EBIS electron beam while updating electric potential self-consistently and atomic processes by the Monte Carlo method. Recent improvements to the code are reported in this paper. The ionization module has been improved by using experimental ionization energies and shell effects. The acceptance of injected ions and the emittance of extracted ion beam are calculated by extending EBIS-PIC to the beam line transport region. An EBIS-PIC simulation is performed for a Cs charge-breeding experiment at BNL. The charge state distribution agrees well with experiments, and additional simulation results ofmore » radial profiles and velocity space distributions of the trapped ions are presented.« less

Effects of multidisciplinary teams and an integrated follow-up electronic system on clinical pharmacist interventions in a cancer hospital.

PubMed

Aziz, Muhammad Tahir; Rehman, Tofeeq Ur; Qureshi, Sadia; Andleeb, Sidrah

2017-12-01

Background The aim of drug therapy is to attain distinct therapeutic effects that not only improve patient's quality of life but also reduce the inherent risks associated with the therapeutic use of drugs. Pharmacists play a key role in reducing these risks by developing appropriate interventions. Whether to accept or reject the intervention made by the pharmacist is a relevant consultant's decision. Objective To evaluate the impact of electronic prompts and follow-up of rejected pharmacy interventions by clinical pharmacists in an in-patient setting. Setting Shaukat Khanum Cancer Hospital & Research Center, Lahore, Pakistan. Method The study was conducted in two phases. Data for 3 months were collected for each phase of the study. Systematic and quantifiable consensus validity was developed for rejected interventions in phase 1, based on patient outcome analyses. Severity rating was assigned to assess the significance of interventions. Electronic prompts for follow-on interventions in phase 2 were then developed and implemented, including daily review via a multidisciplinary team (MDT) approach. Main outcome measure Validity of rejected interventions, acceptance of follow-on interventions before and after re-engineering the pharmacy processes, rejection rate and severity rating of follow-on interventions. Result Of a total of 2649 and 3064 interventions that were implemented during phase 1 and phase 2, 238 (9%) and 307 (10%) were rejected, respectively. Additionally, 133 (56%) were inappropriate rejections during phase 1. The estimated reliability between pharmacists regarding rejected interventions was 0.74 (95% CI of 0.69, 0.79, p 0.000). Prospective data were analysed after implementing electronic alerts and an MDT approach. The acceptance rate of follow-on interventions in phase 2 was 60% (184). Conclusion Electronic prompts for follow-on interventions together with an MDT approach enhance the optimization of pharmacotherapy, increase drug rationality and improve patient care.

75 FR 54287 - Submission of Electronic Documentation With Comailed and Copalletized Mailings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-07

... file, permit the tracking of containers from their origin, through the consolidation site, and... accepted at the origin site, and separate electronic postage statements for the portion being directed to a... origin acceptance location. Origin mailers preparing mailings of bundles of flats must prepare separate...

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

An Empirical Analysis of Citizens' Acceptance Decisions of Electronic-Government Services: A Modification of the Unified Theory of Acceptance and Use of Technology (UTAUT) Model to Include Trust as a Basis for Investigation

ERIC Educational Resources Information Center

Awuah, Lawrence J.

2012-01-01

Understanding citizens' adoption of electronic-government (e-government) is an important topic, as the use of e-government has become an integral part of governance. Success of such initiatives depends largely on the efficient use of e-government services. The unified theory of acceptance and use of technology (UTAUT) model has provided a…

Navy Controls for Invoice, Receipt, Acceptance, and Property Transfer System Need Improvement

DTIC Science & Technology

2016-02-25

iR APT as a web-based system to electronically invoice, receipt, and accept ser vices and product s from its contractors and vendors. The iR APT system...electronically shares document s bet ween DoD and it s contractors and vendors to eliminate redundant data entr y, increase data accuracy, and reduce...The iR APT system allows contractors to submit and track invoices and receipt and acceptance documents over the web and allows government personnel to

On the physics of electron transfer (drift) in the substance: about the reason of “abnormal” fast transfer of electrons in the plasma of tokamak and at known Bohm’s diffusion

NASA Astrophysics Data System (ADS)

Boriev, I. A.

2018-03-01

An analysis of the problem of so-called “abnormal” fast transfer of electrons in tokamak plasma, which turned out much faster than the result of accepted calculation, is given. Such transfer of hot electrons leads to unexpectedly fast destruction of the inner tokamak wall with ejection of its matter in plasma volume, what violates a condition of plasma confinement for controlled thermonuclear fusion. It is shown, taking into account real physics of electron drift in the gas (plasma) and using the conservation law for momentum of electron transfer (drift), that the drift velocity of elastically scattered electrons should be significantly greater than that of accepted calculation. The reason is that the relaxation time of the momentum of electron transfer, to which the electron drift velocity is proportional, is significantly greater (from 16 up to 4 times) than the electron free path time. Therefore, generally accepted replacement of the relaxation time, which is unknown a priori, by the electron free path time, leads to significant (16 times for thermal electrons) underestimation of electron drift velocity (mobility). This result means, that transfer of elastically (and isotropically) scattered electrons in the gas phase should be so fast, and corresponds to multiplying coefficient (16), introduced by D. Bohm to explain the observed by him “abnormal” fast diffusion of electrons.

Organic solvent-free sugar-based transparency nanopatterning material derived from biomass for eco-friendly optical biochips using green lithography

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Oshima, Akihiro; Oyama, Tomoko G.; Ito, Kenta; Sugahara, Kigenn; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi

2014-05-01

An organic solvent-free sugar-based transparency nanopatterning material which had specific desired properties such as nanostructures of subwavelength grating and moth-eye antireflection, acceptable thermal stability of 160 °C, and low imaginary refractive index of less than 0.005 at 350-800 nm was proposed using electron beam lithography. The organic solvent-free sugar-based transparency nanopatterning material is expected for non-petroleum resources, environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of tetramethylammonium hydroxide. 120 nm moth-eye antireflection nanopatterns images with exposure dose of 10 μC/cm2 were provided by specific process conditions of electron beam lithography. The developed sugar derivatives with hydroxyl groups and EB sensitive groups in the organic solvent-free sugar-based transparency nanopatterning material were applicable to future development of optical interface films of biology and electronics as a novel chemical design.

Bi-diketopyrrolopyrrole (Bi-DPP) as a novel electron accepting compound in low band gap π-conjugated donor–acceptor copolymers/oligomers

PubMed Central

Ahner, Johannes; Nowotny, Jürgen; Schubert, Ulrich S.; Hager, Martin D.

2017-01-01

Abstract The synthesis and characterization of a novel 2,5-diketopyrrolo[3,4-c]pyrrole(DPP)-based accepting building block with the scheme DPP-neutral small linker-DPP (Bi-DPP) is presented, which was utilized as electron accepting moiety for low band gap π-conjugated donor–acceptor copolymers as well as for a donor–acceptor small molecule. The electron accepting moiety Bi-DPP was prepared via a novel synthetic pathway by building up two DPP moieties step by step simultaneously starting from a neutral phenyl core unit. Characterization of the synthesized oligomeric and polymeric materials via cyclic voltammetry afford LUMO energy levels from −3.49 to −3.59 eV as well as HOMO energy levels from −5.07 to −5.34 eV resulting in low energy band gaps from 1.52 to 1.81 eV. Spin coating of the prepared donor–acceptor oligomers/polymers resulted in well-defined films. Moreover, UV–vis measurements of the investigated donor–acceptor systems showed a broad absorption over the whole visible region. It is demonstrated that Bi-DPP as an electron accepting moiety in donor–acceptor systems offer potential properties for organic solar cell devices. PMID:29491794

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents; signatures; acceptance... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents; signatures; acceptance... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

Global Distribution of Net Electron Acceptance in Subseafloor Sediment

NASA Astrophysics Data System (ADS)

Fulfer, V. M.; Pockalny, R. A.; D'Hondt, S.

2017-12-01

We quantified the global distribution of net electron acceptance rates (e-/m2/year) in subseafloor sediment (>1.5 meters below seafloor [mbsf]) using (i) a modified version of the chemical-reaction-rate algorithm by Wang et al. (2008), (ii) physical properties and dissolved oxygen and sulfate data from interstitial waters of sediment cores collected by the Ocean Drilling Program, Integrated Ocean Drilling Program, International Ocean Discovery Program, and U.S. coring expeditions, and (iii) correlation of net electron acceptance rates to global oceanographic properties. Calculated net rates vary from 4.8 x 1019 e-/m2/year for slowly accumulating abyssal clay to 1.2 x 1023 e-/m2/year for regions of high sedimentation rate. Net electron acceptance rate correlates strongly with mean sedimentation rate. Where sedimentation rate is very low (e.g., 1 m/Myr), dissolved oxygen penetrates more than 70 mbsf and is the primary terminal electron acceptor. Where sedimentation rate is moderate (e.g., 3 to 60 m/Myr), dissolved sulfate penetrates as far as 700 mbsf and is the principal terminal electron acceptor. Where sedimentation rate is high (e.g., > 60 m/Myr), dissolved sulfate penetrates only meters, but is the principal terminal electron acceptor in subseafloor sediment to the depth of sulfate penetration. Because microbial metabolism continues at greater depths than the depth of sulfate penetration in fast-accumulating sediment, complete quantification of subseafloor metabolic rates will require consideration of other chemical species.

Use and acceptance of electronic communication by patients with multiple sclerosis: a multicenter questionnaire study.

PubMed

Haase, Rocco; Schultheiss, Thorsten; Kempcke, Raimar; Thomas, Katja; Ziemssen, Tjalf

2012-10-15

The number of multiple sclerosis (MS) information websites, online communities, and Web-based health education programs has been increasing. However, MS patients' willingness to use new ways of communication, such as websites, mobile phone application, short message service, or email with their physician, remains unknown. We designed a questionnaire to evaluate the a priori use of electronic communication methods by MS patients and to assess their acceptance of such tools for communication with their health care providers. We received complete data from 586 MS patients aged between 17 and 73 years. Respondents were surveyed in outpatient clinics across Germany using a novel paper-and-pencil questionnaire. In addition to demographics, the survey items queried frequency of use of, familiarity with, and comfort with using computers, websites, email, and mobile phones. About 90% of all MS patients used a personal computer (534/586) and the Internet (527/586) at least once a week, 87.0% (510/586) communicated by email, and 85.6% (488/570) communicated by mobile phone. When asked about their comfort with using electronic communication methods for communication with health care providers, 20.5% (120/586) accepted communication by mobile Internet application or short message service via mobile phone, 41.0% (240/586) by websites, 54.3% (318/586) by email service, and 67.8% (397/586) by at least one type of electronic communication. The level of a priori use was the best predictor for the acceptance of electronic communication with health care providers. Patients who reported already searching online for health information (odds ratio 2.4, P < .001) and who had already communicated with a physician through a website (odds ratio 3.3, P = .03) reported higher acceptance for Web-based communication. Patients who already scheduled appointments with their mobile phones (odds ratio 2.1, P = .002) were more likely to accept the use of mobile phone applications or short message service for communicating with their physician. The majority of MS patients seen at specialist centers already use modern communication technology regularly. New forms of electronic communication appear to have high levels of acceptance for exchanging information about MS between patients and health care providers. Such methods should be integrated into eHealth services such as electronic health records and patient relationship management systems.

Towards Real Time Diagnostics of Hybrid Welding Laser/GMAW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Timothy Mcjunkin; Dennis C. Kunerth; Corrie Nichol

2013-07-01

Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defectsmore » or precursors to defects and correct when possible during the weld process.« less

Towards real time diagnostics of Hybrid Welding Laser/GMAW

DOE Office of Scientific and Technical Information (OSTI.GOV)

McJunkin, T. R.; Kunerth, D. C.; Nichol, C. I.

2014-02-18

Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defectsmore » or precursors to defects and correct when possible during the weld process.« less

Towards real time diagnostics of Hybrid Welding Laser/GMAW

NASA Astrophysics Data System (ADS)

McJunkin, T. R.; Kunerth, D. C.; Nichol, C. I.; Todorov, E.; Levesque, S.

2014-02-01

Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defects or precursors to defects and correct when possible during the weld process.

Acceptability of an Electronic Self Report Assessment Program for Patients with Cancer

PubMed Central

Wolpin, S.; Berry, D.; Austin-Seymour, M.; Bush, N.; Fann, J.R.; Halpenny, B.; Lober, W.; McCorkle, Ruth

2010-01-01

Background Eliciting symptom and quality of life information from patients is an important component of medical and nursing care processes. Traditionally, this information has been collected with paper and pencil. However, this approach presents several barriers, including delays in receiving information, difficulty integrating responses with electronic records and the time required to manual score questionnaires for measurement purposes. One solution that addresses many of these barriers is the adoption of computerized screening for symptom and quality of life information. Objective This research explored the acceptability of asking symptom and quality of life questions using the Electronic Self Report Assessment – Cancer program on wireless laptops equipped with touch screen format. Methods Acceptability data was explored with respect to whether any differences may be attributed to demographics, and symptom and quality of life levels such as depression, cognitive and emotional functioning. This evaluation utilized descriptive and univariate statistics to examine data from 342 participants from the ongoing ESRA-C randomized clinical trial. Research participants for the ESRA-C study were recruited from the Seattle Cancer Care Alliance (SCCA), a consortium between the University of Washington Medical Center, Fred Hutchinson Cancer Research Center, and Children’s Hospital and Regional Medical Center in Seattle, Washington. Results The sample consisted of 342 adult participants who completed both baseline and follow-up survey sessions. Medical Oncology represented the largest recruitment group (45.3%), followed by Stem Cell Transplant (34.5%) and Radiation Oncology (20.2%). The primary finding was that patients were generally able to utilize ESRA-C quickly and without difficulty in a real-world clinical setting and that they were overall quite satisfied with the ESRA-C program. Significant differences were found in several acceptability areas with respect to demographics and quality of life measures, such as age, gender, and severe distress. Conclusions This analysis confirms that the ESRA-C application for collecting symptom and quality of life information is easy for patients to use and acceptable across a range of user characteristics. We intend to build on our work by using the survey platform in other modalities while ensuring that the patient’s preferences are considered at all times. PMID:19047882

Acceptability of an Electronic Self-Report Assessment Program for patients with cancer.

PubMed

Wolpin, Seth; Berry, Donna; Austin-Seymour, Mary; Bush, Nigel; Fann, Jesse R; Halpenny, Barbara; Lober, William B; McCorkle, Ruth

2008-01-01

Eliciting symptom and quality of life information from patients is an important component of medical and nursing care processes. Traditionally, this information has been collected with paper and pencil. However, this approach presents several barriers, including delays in receiving information, difficulty in integrating responses with electronic records, and the time required to manually score questionnaires for measurement purposes. One solution that addresses many of these barriers is the adoption of computerized screening for symptom and quality-of-life information. This research explored the acceptability of asking symptom and quality-of-life questions using the Electronic Self Report Assessment-Cancer program on wireless laptops equipped with touch-screen format. Acceptability data were explored with respect to whether any differences may be attributed to demographics and symptom and quality-of-life levels, such as depression and cognitive and emotional functioning. This evaluation used descriptive and univariate statistics to examine data from 342 participants from the ongoing ESRA-C randomized clinical trial. Research participants for the ESRA-C study were recruited from the Seattle Cancer Care Alliance, a consortium among the University of Washington Medical Center, Fred Hutchinson Cancer Research Center, and Children's Hospital and Regional Medical Center in Seattle, WA. The sample consisted of 342 adult participants who completed both baseline and follow-up survey sessions. Medical oncology represented the largest recruitment group (45.3%), followed by stem cell transplant (34.5%) and radiation oncology (20.2%). The primary finding was that patients were generally able to use ESRA-C quickly and without difficulty in a real-world clinical setting and that they were overall quite satisfied with the ESRA-C program. Significant differences were found in several acceptability areas with respect to demographics and quality of life measures such as age, sex, and severe distress. This analysis confirms that the ESRA-C application for collecting symptom and quality of life information is easy for patients to use and acceptable across a range of user characteristics. We intend to build on our work by using the survey platform in other modalities while ensuring that the patient's preferences are considered at all times.

Investigation of the validity of quasilinear theory for electron Landau damping in a tokamak using a broad-band wave effect

DOE PAGES

Lee, Jungpyo; Bonoli, Paul; Wright, John

2011-01-01

The quasilinear diffusion coefficient assuming a constant magnetic field along the electron orbit is widely used to describe electron Landau damping of waves in a tokamak where the magnitude of the magnetic field varies on a flux surface. To understand the impact of violating the constant magnetic field assumption, we introduce the effect of a broad-bandwidth wave spectrum which has been used in the past to validate quasilinear theory for the fast decorrelation process between resonances. By the reevaluation of the diffusion coefficient through the level of the phase integral for the tokamak geometry with the broad-band wave effect included,more » we identify the three acceptable errors for the use of the quasilinear diffusion coefficient.« less

Informatics in radiology (infoRAD): multimedia extension of medical imaging resource center teaching files.

PubMed

Yang, Guo Liang; Aziz, Aamer; Narayanaswami, Banukumar; Anand, Ananthasubramaniam; Lim, C C Tchoyoson; Nowinski, Wieslaw Lucjan

2005-01-01

A new method has been developed for multimedia enhancement of electronic teaching files created by using the standard protocols and formats offered by the Medical Imaging Resource Center (MIRC) project of the Radiological Society of North America. The typical MIRC electronic teaching file consists of static pages only; with the new method, audio and visual content may be added to the MIRC electronic teaching file so that the entire image interpretation process can be recorded for teaching purposes. With an efficient system for encoding the audiovisual record of on-screen manipulation of radiologic images, the multimedia teaching files generated are small enough to be transmitted via the Internet with acceptable resolution. Students may respond with the addition of new audio and visual content and thereby participate in a discussion about a particular case. MIRC electronic teaching files with multimedia enhancement have the potential to augment the effectiveness of diagnostic radiology teaching. RSNA, 2005.

Delayed Slater determinant update algorithms for high efficiency quantum Monte Carlo.

PubMed

McDaniel, T; D'Azevedo, E F; Li, Y W; Wong, K; Kent, P R C

2017-11-07

Within ab initio Quantum Monte Carlo simulations, the leading numerical cost for large systems is the computation of the values of the Slater determinants in the trial wavefunction. Each Monte Carlo step requires finding the determinant of a dense matrix. This is most commonly iteratively evaluated using a rank-1 Sherman-Morrison updating scheme to avoid repeated explicit calculation of the inverse. The overall computational cost is, therefore, formally cubic in the number of electrons or matrix size. To improve the numerical efficiency of this procedure, we propose a novel multiple rank delayed update scheme. This strategy enables probability evaluation with an application of accepted moves to the matrices delayed until after a predetermined number of moves, K. The accepted events are then applied to the matrices en bloc with enhanced arithmetic intensity and computational efficiency via matrix-matrix operations instead of matrix-vector operations. This procedure does not change the underlying Monte Carlo sampling or its statistical efficiency. For calculations on large systems and algorithms such as diffusion Monte Carlo, where the acceptance ratio is high, order of magnitude improvements in the update time can be obtained on both multi-core central processing units and graphical processing units.

Delayed Slater determinant update algorithms for high efficiency quantum Monte Carlo

NASA Astrophysics Data System (ADS)

McDaniel, T.; D'Azevedo, E. F.; Li, Y. W.; Wong, K.; Kent, P. R. C.

2017-11-01

Within ab initio Quantum Monte Carlo simulations, the leading numerical cost for large systems is the computation of the values of the Slater determinants in the trial wavefunction. Each Monte Carlo step requires finding the determinant of a dense matrix. This is most commonly iteratively evaluated using a rank-1 Sherman-Morrison updating scheme to avoid repeated explicit calculation of the inverse. The overall computational cost is, therefore, formally cubic in the number of electrons or matrix size. To improve the numerical efficiency of this procedure, we propose a novel multiple rank delayed update scheme. This strategy enables probability evaluation with an application of accepted moves to the matrices delayed until after a predetermined number of moves, K. The accepted events are then applied to the matrices en bloc with enhanced arithmetic intensity and computational efficiency via matrix-matrix operations instead of matrix-vector operations. This procedure does not change the underlying Monte Carlo sampling or its statistical efficiency. For calculations on large systems and algorithms such as diffusion Monte Carlo, where the acceptance ratio is high, order of magnitude improvements in the update time can be obtained on both multi-core central processing units and graphical processing units.

Implementation of an electronic fingerprint-linked data collection system: a feasibility and acceptability study among Zambian female sex workers.

PubMed

Wall, Kristin M; Kilembe, William; Inambao, Mubiana; Chen, Yi No; Mchoongo, Mwaka; Kimaru, Linda; Hammond, Yuna Tiffany; Sharkey, Tyronza; Malama, Kalonde; Fulton, T Roice; Tran, Alex; Halumamba, Hanzunga; Anderson, Sarah; Kishore, Nishant; Sarwar, Shawn; Finnegan, Trisha; Mark, David; Allen, Susan A

2015-06-27

Patient identification within and between health services is an operational challenge in many resource-limited settings. When following HIV risk groups for service provision and in the context of vaccine trials, patient misidentification can harm patient care and bias trial outcomes. Electronic fingerprinting has been proposed to identify patients over time and link patient data between health services. The objective of this study was to determine 1) the feasibility of implementing an electronic-fingerprint linked data capture system in Zambia and 2) the acceptability of this system among a key HIV risk group: female sex workers (FSWs). Working with Biometrac, a US-based company providing biometric-linked healthcare platforms, an electronic fingerprint-linked data capture system was developed for use by field recruiters among Zambian FSWs. We evaluated the technical feasibility of the system for use in the field in Zambia and conducted a pilot study to determine the acceptability of the system, as well as barriers to uptake, among FSWs. We found that implementation of an electronic fingerprint-linked patient tracking and data collection system was feasible in this relatively resource-limited setting (false fingerprint matching rate of 1/1000 and false rejection rate of <1/10,000) and was acceptable among FSWs in a clinic setting (2% refusals). However, our data indicate that less than half of FSWs are comfortable providing an electronic fingerprint when recruited while they are working. The most common reasons cited for not providing a fingerprint (lack of privacy/confidentiality issues while at work, typically at bars or lodges) could be addressed by recruiting women during less busy hours, in their own homes, in the presence of "Queen Mothers" (FSW organizers), or in the presence of a FSW that has already been fingerprinted. Our findings have major implications for key population research and improved health services provision. However, more work needs to be done to increase the acceptability of the electronic fingerprint-linked data capture system during field recruitment. This study indicated several potential avenues that will be explored to increase acceptability.

Precision laser processing for micro electronics and fiber optic manufacturing

NASA Astrophysics Data System (ADS)

Webb, Andrew; Osborne, Mike; Foster-Turner, Gideon; Dinkel, Duane W.

2008-02-01

The application of laser based materials processing for precision micro scale manufacturing in the electronics and fiber optic industry is becoming increasingly widespread and accepted. This presentation will review latest laser technologies available and discuss the issues to be considered in choosing the most appropriate laser and processing parameters. High repetition rate, short duration pulsed lasers have improved rapidly in recent years in terms of both performance and reliability enabling flexible, cost effective processing of many material types including metal, silicon, plastic, ceramic and glass. Demonstrating the relevance of laser micromachining, application examples where laser processing is in use for production will be presented, including miniaturization of surface mount capacitors by applying a laser technique for demetalization of tracks in the capacitor manufacturing process and high quality laser machining of fiber optics including stripping, cleaving and lensing, resulting in optical quality finishes without the need for traditional polishing. Applications include telecoms, biomedical and sensing. OpTek Systems was formed in 2000 and provide fully integrated systems and sub contract services for laser processes. They are headquartered in the UK and are establishing a presence in North America through a laser processing facility in South Carolina and sales office in the North East.

Acceptability of a reflective e-portfolio instituted in an orthodontic specialist programme: a pilot study.

PubMed

Tonni, I; Oliver, R G

2013-08-01

The purpose of the study was to highlight students' and mentors' acceptability of a reflective e-portfolio instituted in a postgraduate orthodontic programme in the UK. A reflective e-portfolio was developed on the basis of principles provided by a literature search and was piloted for 2 months with six students and seven mentors. At the end of the experience, mentors' and students' acceptability of the e-portfolio with a reflective component was studied using questionnaires. The data were analysed using basic quantitative and qualitative methods. Students' response highlighted acceptability issues related to each aspect of the e-portfolio derived from the literature: relevance of the e-portfolio reflective part; time required for the process; support and mentoring; the implementation method; and the electronic medium. Mentors showed a more positive attitude towards the e-portfolio, expressing only some concerns about the time involved in using it. Furthermore, the analysis of the data highlighted some other acceptability matters: the specificity of the e-portfolio, the communication amongst students and the relationship between students and mentors. The future successful implementation of the reflective e-portfolio will depend on the productive management of the acceptability issues identified by students and mentors, in particular:(i)the specificity of the e-portfolio that would avoid its overlapping with other part of the programme;(ii)the increasing communication amongst students to improve their knowledge of the reflective writing process; and (iii)the development of a relationship between students and mentors helping to create the appropriate environment for reflection. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Preliminary research concerning the use of electron accelerators to improve the conservability and to extend the shelf-life of fruits and vegetables

NASA Astrophysics Data System (ADS)

Minea, R.; Oproiu, C.; Pascanu, S.; Matei, C.; Ferdes, O.

1996-06-01

The potential of ionizing radiation treatment for food preservation, shelf-life extension, control of microbial load and reduction of pathogenic microorganism was demonstrated. The irradiations were performed under normal conditions on the Institute of Physics and Technology for Radiation Device's linear electron accelerator, which has the following parameters: 5 μA mean beam current, 6 MeV electron mean energy, pulse period 3.5 μs and dose rates between 100-1500 Gy/min. This research project was aimed at assuring the consumer's acceptance for radiation-treated food and to obtain a significant reduction of food losses. We also propose a promising solution for the radiation processing of some bulk food products at the place of storage, consisting of a mobile electron accelerator. The main characteristics of the mobile electron accelerator are: electron energy 3 to 5 MeV, maximum beam power 5 kW, vertical electron beam; irradiation is possible both with electron beams and with bremsstrahlung. The results of our preliminary research lead to the conclusion that electron-beam irradiation and the use of electron accelerators is a promising solution for food preservation and food safety. Interesting future applications are outlined.

17 CFR 232.14 - Paper filings not accepted without exemption.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 2 2011-04-01 2011-04-01 false Paper filings not accepted... COMMISSION REGULATION S-T-GENERAL RULES AND REGULATIONS FOR ELECTRONIC FILINGS General § 232.14 Paper filings not accepted without exemption. The Commission will not accept in paper format any filing required to...

Comparing Acquisition Strategies: Open Architecture versus Product Lines

DTIC Science & Technology

2010-04-30

software • New SOW language for accepting software deliveries – Enables third-party reuse • Additional SOW language regarding conducting software code walkthroughs and for using integrated development environments ...change the business environment must be the primary factor that drives the technical approach. Accordingly, there are business case decisions to be...elements of a system design should be made available to the customer to observe throughout the design process. Electronic access to the design environment

Evaluation of Electronic Prescribing Decision Support System at a Tertiary Care Pediatric Hospital: The User Acceptance Perspective.

PubMed

Omar, Abdurahman; Ellenius, Johan; Lindemalm, Synnöve

2017-01-01

This study aims to evaluate pediatrician's acceptance, perception and use of Electronic Prescribing Decision Support Systems (EPDSS) at a tertiary care using Extended Technology Acceptance Model (TAM2). Qualitative research methodology was applied. Semi-structured questions were developed according to TAM2 model. Pediatricians perceived that the EPDSS is useful and they showed a favorable attitude. However, perceived ease of use and output quality appeared to affect use of EPDSS. Concerns were expressed about complicated screens, difficulty to read and view medication overview of the patient, the navigation requires many clicks and medication system don't meet their need. End users have difficulty of ordering drugs for ploy-clinical patients and they were unable to cancel or stop medications. Junior pediatricians were influenced by senior colleague since they can get better advice about medication order than the system. Applying TAM2 framework has revealed that pediatrician's attitude and acceptance of electronic prescribing system. This study has identified factors that are important for end user acceptance as well as suggestions for system improvement. Although pediatricians are positive to the usefulness of EPDSS, it appears there are some acceptance problems due to ease of use concern and usability issues of the system.

Tumor cell membrane-targeting pH-dependent electron donor-acceptor fluorescence systems with low background signals.

PubMed

Han, Liang; Liu, Mingming; Ye, Deyong; Zhang, Ning; Lim, Ed; Lu, Jing; Jiang, Chen

2014-03-01

Minimizing the background signal is crucial for developing tumor-imaging techniques with sufficient specificity and sensitivity. Here we use pH difference between healthy tissues and tumor and tumor targeting delivery to achieve this goal. We synthesize fluorophore-dopamine conjugate as pH-dependent electron donor-acceptor fluorescence system. Fluorophores are highly sensitive to electron-transfer processes, which can alter their optical properties. The intrinsic redox properties of dopamine are oxidation of hydroquinone to quinone at basic pH and reduction of quinone to hydroquinone at acidic pH. Quinone can accept electron then quench fluorescence. We design tumor cell membrane-targeting carrier for delivery. We demonstrate quenched fluorophore-quinone can be specially transferred to tumor extracellular environment and tumor-accumulated fluorophore can be activated by acidic pH. These tumor-targeting pH-dependent electron donor-acceptor fluorescence systems may offer new opportunity for developing tumor-imaging techniques. Copyright © 2014 Elsevier Ltd. All rights reserved.

PMMA/PS coaxial electrospinning: a statistical analysis on processing parameters

NASA Astrophysics Data System (ADS)

Rahmani, Shahrzad; Arefazar, Ahmad; Latifi, Masoud

2017-08-01

Coaxial electrospinning, as a versatile method for producing core-shell fibers, is known to be very sensitive to two classes of influential factors including material and processing parameters. Although coaxial electrospinning has been the focus of many studies, the effects of processing parameters on the outcomes of this method have not yet been well investigated. A good knowledge of the impacts of processing parameters and their interactions on coaxial electrospinning can make it possible to better control and optimize this process. Hence, in this study, the statistical technique of response surface method (RSM) using the design of experiments on four processing factors of voltage, distance, core and shell flow rates was applied. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), oil immersion and Fluorescent microscopy were used to characterize fiber morphology. The core and shell diameters of fibers were measured and the effects of all factors and their interactions were discussed. Two polynomial models with acceptable R-squares were proposed to describe the core and shell diameters as functions of the processing parameters. Voltage and distance were recognized as the most significant and influential factors on shell diameter, while core diameter was mainly under the influence of core and shell flow rates besides the voltage.

Facilitating the openEHR approach - organizational structures for defining high-quality archetypes.

PubMed

Kohl, Christian Dominik; Garde, Sebastian; Knaup, Petra

2008-01-01

Using openEHR archetypes to establish an electronic patient record promises rapid development and system interoperability by using or adopting existing archetypes. However, internationally accepted, high quality archetypes which enable a comprehensive semantic interoperability require adequate development and maintenance processes. Therefore, structures have to be created involving different health professions. In the following we present a model which facilitates and governs distributed but cooperative development and adoption of archetypes by different professionals including peer reviews. Our model consists of a hierarchical structure of professional committees and descriptions of the archetype development process considering these different committees.

Potential contribution of microbial degradation to natural attenuation of MTBE in surface water systems

USGS Publications Warehouse

Bradley, P.M.; Chapelle, F.H.; Landmeyer, J.E.

2001-01-01

The potential contribution of in situ biodegradation as a mechanism for natural attenuation of MTBE in surface water was studied. Surface water sediments from streams and lakes at 11 sites throughout the US. Microbial degradation of [U-14C] MTBE was observed in surface-water-sediment microcosms under anaerobic conditions, but the efficiency and products of anaerobic MTBE biodegradation were strongly dependent on the predominant terminal electron accepting conditions. In the presence of substantial methanogenic activity, MTBE biodegradation was nominal and involved reduction of MTBE to t-butanol (TBA). Under more oxidizing conditions, minimal accumulation of 14C-TBA and significant mineralization of [U-14C] MTBE to 14CO2 were observed. Microorganisms inhabiting the bed sediments of streams and lakes could degrade MTBE effectively under a range of anaerobic terminal electron accepting conditions. Thus, anaerobic bed sediment microbial processes also might contribute to natural attenuation of MTBE in surface water systems throughout the US. This is an abstract of a paper presented at the 222nd ACS National Meting (Chicago, IL 8/26-30/2001).

Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

ERIC Educational Resources Information Center

Aquino, Cesar A.

2014-01-01

This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

Early bacteriopheophytin reduction in charge separation in reaction centers of Rhodobacter sphaeroides.

PubMed

Zhu, Jingyi; van Stokkum, Ivo H M; Paparelli, Laura; Jones, Michael R; Groot, Marie Louise

2013-06-04

A question at the forefront of biophysical sciences is, to what extent do quantum effects and protein conformational changes play a role in processes such as biological sensing and energy conversion? At the heart of photosynthetic energy transduction lie processes involving ultrafast energy and electron transfers among a small number of tetrapyrrole pigments embedded in the interior of a protein. In the purple bacterial reaction center (RC), a highly efficient ultrafast charge separation takes place between a pair of bacteriochlorophylls: an accessory bacteriochlorophyll (B) and bacteriopheophytin (H). In this work, we applied ultrafast spectroscopy in the visible and near-infrared spectral region to Rhodobacter sphaeroides RCs to accurately track the timing of the electron on BA and HA via the appearance of the BA and HA anion bands. We observed an unexpectedly early rise of the HA⁻ band that challenges the accepted simple picture of stepwise electron transfer with 3 ps and 1 ps time constants. The implications for the mechanism of initial charge separation in bacterial RCs are discussed in terms of a possible adiabatic electron transfer step between BA and HA, and the effect of protein conformation on the electron transfer rate. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

A simple pore water hydrogen diffusion syringe sampler

USGS Publications Warehouse

Vroblesky, D.A.; Chapelle, F.H.; Bradley, P.M.

2007-01-01

Molecular hydrogen (H2) is an important intermediate product and electron donor in microbial metabolism. Concentrations of dissolved H 2 are often diagnostic of the predominant terminal electron-accepting processes in ground water systems or aquatic sediments. H2 concentrations are routinely measured in ground water monitoring wells but are rarely measured in saturated aquatic sediments due to a lack of simple and practical sampling methods. This report describes the design and development (including laboratory and field testing) of a simple, syringe-based H 2 sampler in (1) saturated, riparian sediments, (2) surface water bed sediments, and (3) packed intervals of a fractured bedrock borehole that are inaccessible by standard pumped methods. ?? 2007 National Ground Water Association.

Conductivity and power factor enhancement of n-type semiconducting polymers using sodium silica gel dopant

NASA Astrophysics Data System (ADS)

Madan, Deepa; Zhao, Xingang; Ireland, Robert M.; Xiao, Derek; Katz, Howard E.

2017-08-01

This work demonstrates the use of sodium silica gel (Na-SG) particles as a reducing agent for n-type conjugated polymers to improve the conductivity and thermoelectric properties. Substantial increase in the electrical conductivity (σ, from 10-7 to 10-3 S/cm in air) was observed in two naphthalenetetracarboxylic diimide solution-processable n-type polymers, one of which was designed and synthesized in our lab. Systematic investigations of electrical conductivity were done by varying the weight percentage of Na-SG in the polymers. Additional evidence for the reduction process was obtained from electron spin resonance spectroscopy and control experiments involving nonreducing silica particles and non-electron-accepting polystyrene. The Seebeck coefficient S of the highest conductivity sample was measured and found to be in agreement with an empirical model. All the electrical conductivity and Seebeck coefficients measurements were performed in ambient atmosphere.

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

16 CFR 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Acceptable certificates. 1110.5 Section 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

Linking Specific Heterotrophic Bacterial Populations to Bioreduction of Uranium and Nitrate in Contaminated Subsurface Sediments by Using Stable Isotope Probing▿†

PubMed Central

Akob, Denise M.; Kerkhof, Lee; Küsel, Kirsten; Watson, David B.; Palumbo, Anthony V.; Kostka, Joel E.

2011-01-01

Shifts in terminal electron-accepting processes during biostimulation of uranium-contaminated sediments were linked to the composition of stimulated microbial populations using DNA-based stable isotope probing. Nitrate reduction preceded U(VI) and Fe(III) reduction in [13C]ethanol-amended microcosms. The predominant, active denitrifying microbial groups were identified as members of the Betaproteobacteria, whereas Actinobacteria dominated under metal-reducing conditions. PMID:21948831

Study of the electronic structure of electron accepting cyano-films: TCNQversusTCNE.

PubMed

Capitán, Maria J; Álvarez, Jesús; Navio, Cristina

2018-04-18

In this article, we perform systematic research on the electronic structure of two closely related organic electron acceptor molecules (TCNQ and TCNE), which are of technological interest due to their outstanding electronic properties. These studies have been performed from the experimental point of view by the use electron spectroscopies (XPS and UPS) and supported theoretically by the use of ab-initio DFT calculations. The cross-check between both molecules allows us to identify the characteristic electronic features of each part of the molecules and their contribution to the final electronic structure. We can describe the nature of the band gap of these materials, and we relate this with the appearance of the shake-up features in the core level spectra. A band bending and energy gap reduction of the aforementioned electronic structure in contact with a metal surface are seen in the experimental results as well in the theoretical calculations. This behavior implies that the TCNQ thin film accepts electrons from the metal substrate becoming a Schottky n-junction.

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Code of Federal Regulations, 2014 CFR

2014-04-01

... signatures not based on biometrics. If you use electronic signatures that are not based upon biometrics you...) Electronic signatures based on biometrics. If you use electronic signatures based upon biometrics, they must...

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Code of Federal Regulations, 2012 CFR

2012-04-01

... signatures not based on biometrics. If you use electronic signatures that are not based upon biometrics you...) Electronic signatures based on biometrics. If you use electronic signatures based upon biometrics, they must...

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Code of Federal Regulations, 2011 CFR

2011-04-01

... signatures not based on biometrics. If you use electronic signatures that are not based upon biometrics you...) Electronic signatures based on biometrics. If you use electronic signatures based upon biometrics, they must...

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Code of Federal Regulations, 2013 CFR

2013-04-01

... signatures not based on biometrics. If you use electronic signatures that are not based upon biometrics you...) Electronic signatures based on biometrics. If you use electronic signatures based upon biometrics, they must...

Electrochemically active biofilms: facts and fiction. A review

PubMed Central

Babauta, Jerome; Renslow, Ryan; Lewandowski, Zbigniew; Beyenal, Haluk

2014-01-01

This review examines the electrochemical techniques used to study extracellular electron transfer in the electrochemically active biofilms that are used in microbial fuel cells and other bioelectrochemical systems. Electrochemically active biofilms are defined as biofilms that exchange electrons with conductive surfaces: electrodes. Following the electrochemical conventions, and recognizing that electrodes can be considered reactants in these bioelectrochemical processes, biofilms that deliver electrons to the biofilm electrode are called anodic, ie electrode-reducing, biofilms, while biofilms that accept electrons from the biofilm electrode are called cathodic, ie electrode-oxidizing, biofilms. How to grow these electrochemically active biofilms in bioelec-trochemical systems is discussed and also the critical choices made in the experimental setup that affect the experimental results. The reactor configurations used in bioelectrochemical systems research are also described and the authors demonstrate how to use selected voltammetric techniques to study extracellular electron transfer in bioelectrochemical systems. Finally, some critical concerns with the proposed electron transfer mechanisms in bioelectrochemical systems are addressed together with the prospects of bioelectrochemical systems as energy-converting and energy-harvesting devices. PMID:22856464

Progress Toward an Integration of Process-Structure-Property-Performance Models for "Three-Dimensional (3-D) Printing" of Titanium Alloys

NASA Astrophysics Data System (ADS)

Collins, P. C.; Haden, C. V.; Ghamarian, I.; Hayes, B. J.; Ales, T.; Penso, G.; Dixit, V.; Harlow, G.

2014-07-01

Electron beam direct manufacturing, synonymously known as electron beam additive manufacturing, along with other additive "3-D printing" manufacturing processes, are receiving widespread attention as a means of producing net-shape (or near-net-shape) components, owing to potential manufacturing benefits. Yet, materials scientists know that differences in manufacturing processes often significantly influence the microstructure of even widely accepted materials and, thus, impact the properties and performance of a material in service. It is important to accelerate the understanding of the processing-structure-property relationship of materials being produced via these novel approaches in a framework that considers the performance in a statistically rigorous way. This article describes the development of a process model, the assessment of key microstructural features to be incorporated into a microstructure simulation model, a novel approach to extract a constitutive equation to predict tensile properties in Ti-6Al-4V (Ti-64), and a probabilistic approach to measure the fidelity of the property model against real data. This integrated approach will provide designers a tool to vary process parameters and understand the influence on performance, enabling design and optimization for these highly visible manufacturing approaches.

Enhancing user acceptance of mandated mobile health information systems: the ePOC (electronic point-of-care project) experience.

PubMed

Burgess, Lois; Sargent, Jason

2007-01-01

From a clinical perspective, the use of mobile technologies, such as Personal Digital Assistants (PDAs) within hospital environments is not new. A paradigm shift however is underway towards the acceptance and utility of these systems within mobile-based healthcare environments. Introducing new technologies and associated work practices has intrinsic risks which must be addressed. This paper contends that intervening to address user concerns as they arise throughout the system development lifecycle will lead to greater levels of user acceptance, while ultimately enhancing the deliverability of a system that provides a best fit with end user needs. It is envisaged this research will lead to the development of a formalised user acceptance framework based on an agile approach to user acceptance measurement. The results of an ongoing study of user perceptions towards a mandated electronic point-of-care information system in the Northern Illawarra Ambulatory Care Team (TACT) are presented.

Metabolic spatial variability in electrode-respiring Geobacter sulfurreducens biofilms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renslow, Ryan S.; Babauta, Jerome T.; Dohnalkova, Alice

2013-06-01

Certain bacteria are capable of transferring electrons derived from respiratory metabolism to solid extracellular electron-accepting materials1-4. This ability allows the organisms to use conductive substrata as their sole electron sink, generating electricity that is available for practical applications5-7. Geobacter is a biofilm-forming genus capable of this extracellular electron transfer8-11. Evidence in the literature suggests that Geobacter cells produce a conductive matrix to gain access to electron-accepting surfaces12,13. It has been hypothesized that cells that are more than tens of microns from the electron-accepting surface cannot respire because of electrical resistance in the matrix and thus remain metabolically inactive14-16. To testmore » this hypothesis, we sought to determine whether the entire biofilm remains metabolically active and able to respire on an electron-accepting surface as the biofilm thickness increases. We developed and used a novel electrochemical-nuclear magnetic resonance (EC-NMR) microimaging system capable of sustaining an electrochemically active biofilm on a polarized electrode inside a superconducting magnet, allowing for simultaneous NMR and electrochemical investigation of a biofilm for the first time. Here, we show that Geobacter biofilms can grow to several hundred microns thick while respiring on an electrode and that the top of the biofilm remains metabolically active. This is only possible if the cells near the top are able to transfer electrons through the initial biofilm matrix to the electrode. We used X-ray absorption spectroscopy to verify electron transfer to uranium ions by metabolically active cells near the top of the biofilm. Our results reveal that extracellular electron transfer is not prevented by electrical resistance, even when the biofilm is hundreds of microns thick. Furthermore, the electron donor may be the limiting factor for respiration and the base of the biofilm may be less active despite being in close proximity to the electrode. Long-range electron transfer across metabolically inactive regions within Geobacter biofilms adds a novel facet to our comprehension of electrochemically active biology.« less

Evaluation of photosynthetic electrons derivation by exogenous redox mediators.

PubMed

Longatte, Guillaume; Fu, Han-Yi; Buriez, Olivier; Labbé, Eric; Wollman, Francis-André; Amatore, Christian; Rappaport, Fabrice; Guille-Collignon, Manon; Lemaître, Frédéric

2015-10-01

Oxygenic photosynthesis is the complex process that occurs in plants or algae by which the energy from the sun is converted into an electrochemical potential that drives the assimilation of carbon dioxide and the synthesis of carbohydrates. Quinones belong to a family of species commonly found in key processes of the Living, like photosynthesis or respiration, in which they act as electron transporters. This makes this class of molecules a popular candidate for biofuel cell and bioenergy applications insofar as they can be used as cargo to ship electrons to an electrode immersed in the cellular suspension. Nevertheless, such electron carriers are mostly selected empirically. This is why we report on a method involving fluorescence measurements to estimate the ability of seven different quinones to accept photosynthetic electrons downstream of photosystem II, the first protein complex in the light-dependent reactions of oxygenic photosynthesis. To this aim we use a mutant of Chlamydomonas reinhardtii, a unicellular green alga, impaired in electron downstream of photosystem II and assess the ability of quinones to restore electron flow by fluorescence. In this work, we defined and extracted a "derivation parameter" D that indicates the derivation efficiency of the exogenous quinones investigated. D then allows electing 2,6-dichlorobenzoquinone, 2,5-dichlorobenzoquinone and p-phenylbenzoquinone as good candidates. More particularly, our investigations suggested that other key parameters like the partition of quinones between different cellular compartments and their propensity to saturate these various compartments should also be taken into account in the process of selecting exogenous quinones for the purpose of deriving photoelectrons from intact algae. Copyright © 2015 Elsevier B.V. All rights reserved.

Optimization of image quality and dose for Varian aS500 electronic portal imaging devices (EPIDs).

PubMed

McGarry, C K; Grattan, M W D; Cosgrove, V P

2007-12-07

This study was carried out to investigate whether the electronic portal imaging (EPI) acquisition process could be optimized, and as a result tolerance and action levels be set for the PIPSPro QC-3V phantom image quality assessment. The aim of the optimization process was to reduce the dose delivered to the patient while maintaining a clinically acceptable image quality. This is of interest when images are acquired in addition to the planned patient treatment, rather than images being acquired using the treatment field during a patient's treatment. A series of phantoms were used to assess image quality for different acquisition settings relative to the baseline values obtained following acceptance testing. Eight Varian aS500 EPID systems on four matched Varian 600C/D linacs and four matched Varian 2100C/D linacs were compared for consistency of performance and images were acquired at the four main orthogonal gantry angles. Images were acquired using a 6 MV beam operating at 100 MU min(-1) and the low-dose acquisition mode. Doses used in the comparison were measured using a Farmer ionization chamber placed at d(max) in solid water. The results demonstrated that the number of reset frames did not have any influence on the image contrast, but the number of frame averages did. The expected increase in noise with corresponding decrease in contrast was also observed when reducing the number of frame averages. The optimal settings for the low-dose acquisition mode with respect to image quality and dose were found to be one reset frame and three frame averages. All patients at the Northern Ireland Cancer Centre are now imaged using one reset frame and three frame averages in the 6 MV 100 MU min(-1) low-dose acquisition mode. Routine EPID QC contrast tolerance (+/-10) and action (+/-20) levels using the PIPSPro phantom based around expected values of 190 (Varian 600C/D) and 225 (Varian 2100C/D) have been introduced. The dose at dmax from electronic portal imaging has been reduced by approximately 28%, and while the image quality has been reduced, the images produced are still clinically acceptable.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hattawy, M.; Baltzell, N. A.; Dupré, R.

We report on the first measurement of the beam-spin asymmetry in the exclusive process of coherent deeply virtual Compton scattering off a nucleus. The experiment uses the 6 GeV electron beam from the Continuous Electron Beam Accelerator Facility (CEBAF) accelerator at Jefferson Lab incident on a pressurized He-4 gaseous target placed in front of the CEBAF Large Acceptance Spectrometer (CLAS). The scattered electron is detected by CLAS and the photon by a dedicated electromagnetic calorimeter at forward angles. To ensure the exclusivity of the process, a specially designed radial time projection chamber is used to detect the recoiling He-4 nuclei.more » We measure beam-spin asymmetries larger than those observed on the free proton in the same kinematic domain. From these, we are able to extract, in a model-independent way, the real and imaginary parts of the only He-4 Compton form factor, HA. This first measurement of coherent deeply virtual Compton scattering on the He-4 nucleus, with a fully exclusive final state via nuclear recoil tagging, leads the way toward 3D imaging of the partonic structure of nuclei.« less

Trends for Electron Beam Accelerator Applications in Industry

NASA Astrophysics Data System (ADS)

Machi, Sueo

2011-02-01

Electron beam (EB) accelerators are major pieces of industrial equipment used for many commercial radiation processing applications. The industrial use of EB accelerators has a history of more than 50 years and is still growing in terms of both its economic scale and new applications. Major applications involve the modification of polymeric materials to create value-added products, such as heat-resistant wires, heat-shrinkable sheets, automobile tires, foamed plastics, battery separators and hydrogel wound dressing. The surface curing of coatings and printing inks is a growing application for low energy electron accelerators, resulting in an environmentally friendly and an energy-saving process. Recently there has been the acceptance of the use of EB accelerators in lieu of the radioactive isotope cobalt-60 as a source for sterilizing disposable medical products. Environmental protection by the use of EB accelerators is a new and important field of application. A commercial plant for the cleaning flue gases from a coal-burning power plant is in operation in Poland, employing high power EB accelerators. In Korea, a commercial plant uses EB to clean waste water from a dye factory.

Effective D-A-D type chromophore of fumaronitrile-core and terminal alkylated bithiophene for solution-processed small molecule organic solar cells.

PubMed

Nazim, M; Ameen, Sadia; Seo, Hyung-Kee; Shin, Hyung Shik

2015-06-12

A new and novel organic π-conjugated chromophore (named as RCNR) based on fumaronitrile-core acceptor and terminal alkylated bithiophene was designed, synthesized and utilized as an electron-donor material for the solution-processed fabrication of bulk-heterojunction (BHJ) small molecule organic solar cells (SMOSCs). The synthesized organic chromophore exhibited a broad absorption peak near green region and strong emission peak due to the presence of strong electron-withdrawing nature of two nitrile (-CN) groups of fumaronitrile acceptor. The highest occupied molecular orbital (HOMO) energy level of -5.82 eV and the lowest unoccupied molecular orbital (LUMO) energy level of -3.54 eV were estimated for RCNR due to the strong electron-accepting tendency of -CN groups. The fabricated SMOSC devices with RCNR:PC60BM (1:3, w/w) active layer exhibited the reasonable power conversion efficiency (PCE) of ~2.69% with high short-circuit current density (JSC) of ~9.68 mA/cm(2) and open circuit voltage (VOC) of ~0.79 V.

Effective D-A-D type chromophore of fumaronitrile-core and terminal alkylated bithiophene for solution-processed small molecule organic solar cells

PubMed Central

Nazim, M.; Ameen, Sadia; Seo, Hyung-Kee; Shin, Hyung Shik

2015-01-01

A new and novel organic π-conjugated chromophore (named as RCNR) based on fumaronitrile-core acceptor and terminal alkylated bithiophene was designed, synthesized and utilized as an electron-donor material for the solution-processed fabrication of bulk-heterojunction (BHJ) small molecule organic solar cells (SMOSCs). The synthesized organic chromophore exhibited a broad absorption peak near green region and strong emission peak due to the presence of strong electron-withdrawing nature of two nitrile (–CN) groups of fumaronitrile acceptor. The highest occupied molecular orbital (HOMO) energy level of –5.82 eV and the lowest unoccupied molecular orbital (LUMO) energy level of –3.54 eV were estimated for RCNR due to the strong electron-accepting tendency of –CN groups. The fabricated SMOSC devices with RCNR:PC60BM (1:3, w/w) active layer exhibited the reasonable power conversion efficiency (PCE) of ~2.69% with high short-circuit current density (JSC) of ~9.68 mA/cm2 and open circuit voltage (VOC) of ~0.79 V. PMID:26066557

An extension of trust and TAM model with IDT in the adoption of the electronic logistics information system in HIS in the medical industry.

PubMed

Tung, Feng-Cheng; Chang, Su-Chao; Chou, Chi-Min

2008-05-01

Ever since National Health Insurance was introduced in 1995, the number of insurants increased to over 96% from 50 to 60%, with a continuous satisfaction rating of about 70%. However, the premium accounted for 5.77% of GDP in 2001 and the Bureau of National Health Insurance had pressing financial difficulties, so it reformed its expenditure systems, such as fee for service, capitation, case payment and the global budget system in order to control the rising medical costs. Since the change in health insurance policy, most hospitals attempted to reduce their operating expenses and improve efficiency. Introducing the electronic logistics information system is one way of reducing the cost of the department of central warehouse and the nursing stations. Hence, the study proposes a technology acceptance research model and examines how nurses' acceptance of the e-logistics information system has been affected in the medical industry. This research combines innovation diffusion theory, technology acceptance model and added two research parameters, trust and perceived financial cost to propose a new hybrid technology acceptance model. Taking Taiwan's medical industry as an experimental example, this paper studies nurses' acceptance of the electronic logistics information system. The structural equation modeling technique was used to evaluate the causal model and confirmatory factor analysis was performed to examine the reliability and validity of the measurement model. The results of the survey strongly support the new hybrid technology acceptance model in predicting nurses' intention to use the electronic logistics information system. The study shows that 'compatibility', 'perceived usefulness', 'perceived ease of use', and 'trust' all have great positive influence on 'behavioral intention to use'. On the other hand 'perceived financial cost' has great negative influence on behavioral intention to use.

Perceived Harm, Addictiveness, and Social Acceptability of Tobacco Products and Marijuana Among Young Adults: Marijuana, Hookah, and Electronic Cigarettes Win

PubMed Central

Berg, Carla J.; Stratton, Erin; Schauer, Gillian L.; Lewis, Michael; Wang, Yanwen; Windle, Michael; Kegler, Michelle

2015-01-01

Background There has been an increase in non-daily smoking, alternative tobacco product and marijuana use among young adults in recent years. Objectives This study examined perceptions of health risks, addictiveness, and social acceptability of cigarettes, cigar products, smokeless tobacco, hookah, electronic cigarettes, and marijuana among young adults and correlates of such perceptions. Methods In Spring 2013, 10,000 students at two universities in the Southeastern United States were recruited to complete an online survey (2,002 respondents), assessing personal, parental, and peer use of each product; and perceptions of health risks, addictiveness, and social acceptability of each of these products. Results Marijuana was the most commonly used product in the past month (19.2%), with hookah being the second most commonly used (16.4%). The least commonly used were smokeless tobacco products (2.6%) and electronic cigarettes (4.5%). There were high rates of concurrent product use, particularly among electronic cigarette users. The most positively perceived was marijuana, with hookah and electronic cigarettes being second. While tobacco use and related social factors, related positively, influenced perceptions of marijuana, marijuana use and related social factors were not associated with perceptions of any tobacco product. Conclusions/Importance Marketing efforts to promote electronic cigarettes and hookah to be safe and socially acceptable seem to be effective, while policy changes seem to be altering perceptions of marijuana and related social norms. Research is needed to document the health risks and addictive nature of emerging tobacco products and marijuana and evaluate efforts to communicate such risks to youth. PMID:25268294

Perceived harm, addictiveness, and social acceptability of tobacco products and marijuana among young adults: marijuana, hookah, and electronic cigarettes win.

PubMed

Berg, Carla J; Stratton, Erin; Schauer, Gillian L; Lewis, Michael; Wang, Yanwen; Windle, Michael; Kegler, Michelle

2015-01-01

There has been an increase in non-daily smoking, alternative tobacco product and marijuana use among young adults in recent years. This study examined perceptions of health risks, addictiveness, and social acceptability of cigarettes, cigar products, smokeless tobacco, hookah, electronic cigarettes, and marijuana among young adults and correlates of such perceptions. In Spring 2013, 10,000 students at two universities in the Southeastern United States were recruited to complete an online survey (2,002 respondents), assessing personal, parental, and peer use of each product; and perceptions of health risks, addictiveness, and social acceptability of each of these products. Marijuana was the most commonly used product in the past month (19.2%), with hookah being the second most commonly used (16.4%). The least commonly used were smokeless tobacco products (2.6%) and electronic cigarettes (4.5%). There were high rates of concurrent product use, particularly among electronic cigarette users. The most positively perceived was marijuana, with hookah and electronic cigarettes being second. While tobacco use and related social factors, related positively, influenced perceptions of marijuana, marijuana use and related social factors were not associated with perceptions of any tobacco product. Conclusions/Importance: Marketing efforts to promote electronic cigarettes and hookah to be safe and socially acceptable seem to be effective, while policy changes seem to be altering perceptions of marijuana and related social norms. Research is needed to document the health risks and addictive nature of emerging tobacco products and marijuana and evaluate efforts to communicate such risks to youth.

Fate and Transport of Nitrogen and Carbon with Decomposition of Organic Matter in a Reduced Paddy Field Based on a Coupled Nitrogen-Carbon Cycling Model Using the HP1 Code

NASA Astrophysics Data System (ADS)

Toride, N.; Matsuoka, K.

2017-12-01

In order to predict the fate and transport of nitrogen in a reduced paddy field as a result of decomposition of organic matter, we implemented within the PHREEQC program a modified coupled carbon and nitrogen cycling model based on the LEACHM code. SOM decay processes from organic carbon (Org-C) to biomass carbon (Bio-C), humus carbon (Hum-C), and carbon dioxide (CO2) were described using first-order kinetics. Bio-C was recycled into the organic pool. When oxygen was available in an aerobic condition, O2 was used to produce CO2 as an electron accepter. When O2 availability is low, other electron acceptors such as NO3-, Mn4+, Fe3+, SO42-, were used depending on the redox potential. Decomposition of Org-N was related to the carbon cycle using the C/N ratio. Mineralization and immobilization were determined based on available NH4-N and the nitrogen demand for the formation of biomass and humus. Although nitrification was independently described with the first-order decay process, denitrification was linked with the SOM decay since NO3- was an electron accepter for the CO2 production. Proton reactions were coupled with the nitrification from NH4+ to NO3-, and the ammonium generation from NH3 to NH4+. Furthermore, cation and anion exchange reactions were included with the permanent negative charges and the pH dependent variable charges. The carbon and nitrogen cycling model described with PHREEQC was linked with HYDRUS-1D using the HP1 code. Various nitrogen and carbon transport scenarios were demonstrated for the application of organic matter to a saturated paddy soil.

16 CFR § 1110.5 - Acceptable certificates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Acceptable certificates. § 1110.5 Section § 1110.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CERTIFICATES OF COMPLIANCE § 1110.5 Acceptable certificates. A certificate that is in hard copy or electronic...

20 CFR 655.34 - Electronic job registry.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 3 2014-04-01 2014-04-01 false Electronic job registry. 655.34 Section 655... Electronic job registry. (a) Location of and placement in the electronic job registry. Upon acceptance of the... copy of the job order posted by the SWA on the Department's electronic job registry, including any...

20 CFR 655.34 - Electronic job registry.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 3 2013-04-01 2013-04-01 false Electronic job registry. 655.34 Section 655... Electronic job registry. (a) Location of and placement in the electronic job registry. Upon acceptance of the... copy of the job order posted by the SWA on the Department's electronic job registry, including any...

Do GPs use electronic mental health resources? - a qualitative study.

PubMed

Austin, David; Pier, Ciaran; Mitchell, Joanna; Schattner, Peter; Wade, Victoria; Pierce, David; Klein, Britt

2006-05-01

The Better Outcomes in Mental Health Care (BOMHC) initiative encourages general practitioners to use electronic mental health resources (EMHRs) during consultation with patients requiring psychological assistance. However, there is little data on GPs' acceptance and use of EMHRs. Semistructured interviews were conducted with 27 GPs to determine their attitude toward EMHRs, and their use during consultation with patients. Few GPs reported frequently using EMHRs in consultation. Identified barriers to use included lack of familiarity with information technology, and insufficient knowledge of available resources. Identified advantages of electronic resources included high patient acceptance, time efficiency, and improved quality of information. General practitioners recognise several advantages of utilising electronic resources for managing patients with mental illness. However, GPs are not sufficiently familiar with electronic resources to use them effectively. This could be overcome by education.

Anaerobic Methane Oxidation Driven by Microbial Reduction of Natural Organic Matter in a Tropical Wetland

PubMed Central

Valenzuela, Edgardo I.; Prieto-Davó, Alejandra; López-Lozano, Nguyen E.; Hernández-Eligio, Alberto; Vega-Alvarado, Leticia; Juárez, Katy; García-González, Ana Sarahí; López, Mercedes G.

2017-01-01

ABSTRACT Wetlands constitute the main natural source of methane on Earth due to their high content of natural organic matter (NOM), but key drivers, such as electron acceptors, supporting methanotrophic activities in these habitats are poorly understood. We performed anoxic incubations using freshly collected sediment, along with water samples harvested from a tropical wetland, amended with 13C-methane (0.67 atm) to test the capacity of its microbial community to perform anaerobic oxidation of methane (AOM) linked to the reduction of the humic fraction of its NOM. Collected evidence demonstrates that electron-accepting functional groups (e.g., quinones) present in NOM fueled AOM by serving as a terminal electron acceptor. Indeed, while sulfate reduction was the predominant process, accounting for up to 42.5% of the AOM activities, the microbial reduction of NOM concomitantly occurred. Furthermore, enrichment of wetland sediment with external NOM provided a complementary electron-accepting capacity, of which reduction accounted for ∼100 nmol 13CH4 oxidized · cm−3 · day−1. Spectroscopic evidence showed that quinone moieties were heterogeneously distributed in the wetland sediment, and their reduction occurred during the course of AOM. Moreover, an enrichment derived from wetland sediments performing AOM linked to NOM reduction stoichiometrically oxidized methane coupled to the reduction of the humic analogue anthraquinone-2,6-disulfonate. Microbial populations potentially involved in AOM coupled to microbial reduction of NOM were dominated by divergent biota from putative AOM-associated archaea. We estimate that this microbial process potentially contributes to the suppression of up to 114 teragrams (Tg) of CH4 · year−1 in coastal wetlands and more than 1,300 Tg · year−1, considering the global wetland area. IMPORTANCE The identification of key processes governing methane emissions from natural systems is of major importance considering the global warming effects triggered by this greenhouse gas. Anaerobic oxidation of methane (AOM) coupled to the microbial reduction of distinct electron acceptors plays a pivotal role in mitigating methane emissions from ecosystems. Given their high organic content, wetlands constitute the largest natural source of atmospheric methane. Nevertheless, processes controlling methane emissions in these environments are poorly understood. Here, we provide tracer analysis with 13CH4 and spectroscopic evidence revealing that AOM linked to the microbial reduction of redox functional groups in natural organic matter (NOM) prevails in a tropical wetland. We suggest that microbial reduction of NOM may largely contribute to the suppression of methane emissions from tropical wetlands. This is a novel avenue within the carbon cycle in which slowly decaying NOM (e.g., humic fraction) in organotrophic environments fuels AOM by serving as a terminal electron acceptor. PMID:28341676

Anaerobic Methane Oxidation Driven by Microbial Reduction of Natural Organic Matter in a Tropical Wetland.

PubMed

Valenzuela, Edgardo I; Prieto-Davó, Alejandra; López-Lozano, Nguyen E; Hernández-Eligio, Alberto; Vega-Alvarado, Leticia; Juárez, Katy; García-González, Ana Sarahí; López, Mercedes G; Cervantes, Francisco J

2017-06-01

Wetlands constitute the main natural source of methane on Earth due to their high content of natural organic matter (NOM), but key drivers, such as electron acceptors, supporting methanotrophic activities in these habitats are poorly understood. We performed anoxic incubations using freshly collected sediment, along with water samples harvested from a tropical wetland, amended with 13 C-methane (0.67 atm) to test the capacity of its microbial community to perform anaerobic oxidation of methane (AOM) linked to the reduction of the humic fraction of its NOM. Collected evidence demonstrates that electron-accepting functional groups (e.g., quinones) present in NOM fueled AOM by serving as a terminal electron acceptor. Indeed, while sulfate reduction was the predominant process, accounting for up to 42.5% of the AOM activities, the microbial reduction of NOM concomitantly occurred. Furthermore, enrichment of wetland sediment with external NOM provided a complementary electron-accepting capacity, of which reduction accounted for ∼100 nmol 13 CH 4 oxidized · cm -3 · day -1 Spectroscopic evidence showed that quinone moieties were heterogeneously distributed in the wetland sediment, and their reduction occurred during the course of AOM. Moreover, an enrichment derived from wetland sediments performing AOM linked to NOM reduction stoichiometrically oxidized methane coupled to the reduction of the humic analogue anthraquinone-2,6-disulfonate. Microbial populations potentially involved in AOM coupled to microbial reduction of NOM were dominated by divergent biota from putative AOM-associated archaea. We estimate that this microbial process potentially contributes to the suppression of up to 114 teragrams (Tg) of CH 4 · year -1 in coastal wetlands and more than 1,300 Tg · year -1 , considering the global wetland area. IMPORTANCE The identification of key processes governing methane emissions from natural systems is of major importance considering the global warming effects triggered by this greenhouse gas. Anaerobic oxidation of methane (AOM) coupled to the microbial reduction of distinct electron acceptors plays a pivotal role in mitigating methane emissions from ecosystems. Given their high organic content, wetlands constitute the largest natural source of atmospheric methane. Nevertheless, processes controlling methane emissions in these environments are poorly understood. Here, we provide tracer analysis with 13 CH 4 and spectroscopic evidence revealing that AOM linked to the microbial reduction of redox functional groups in natural organic matter (NOM) prevails in a tropical wetland. We suggest that microbial reduction of NOM may largely contribute to the suppression of methane emissions from tropical wetlands. This is a novel avenue within the carbon cycle in which slowly decaying NOM (e.g., humic fraction) in organotrophic environments fuels AOM by serving as a terminal electron acceptor. Copyright © 2017 American Society for Microbiology.

Electronic Adherence Monitoring in a High-Utilizing Pediatric Asthma Cohort: A Feasibility Study.

PubMed

Kenyon, Chén Collin; Chang, Joyce; Wynter, Sheri-Ann; Fowler, Jessica C; Long, Jin; Bryant-Stephens, Tyra C

2016-06-22

Inner-city, minority children with asthma have the highest rates of morbidity and death from asthma and the lowest rates of asthma controller medication adherence. Some recent electronic medication monitoring interventions demonstrated dramatic improvements in adherence in lower-risk populations. The feasibility and acceptability of such an intervention in the highest-risk children with asthma has not been studied. Our objective was to assess the feasibility and acceptability of a community health worker-delivered electronic adherence monitoring intervention among the highest utilizers of acute asthma care in an inner-city practice. This was a prospective cohort pilot study targeting children with the highest frequency of asthma-related emergency department and hospital care within a local managed care Medicaid plan. The 3-month intervention included motivational interviewing, electronic monitoring of controller and rescue inhaler use, and outreach by a community health worker for predefined medication alerts. We measured acceptability by using a modified technology acceptability model and changes in asthma control using the Asthma Control Test (ACT). Given prominent feasibility issues, we describe qualitative patterns of medication use at baseline only. We enrolled 14 non-Hispanic black children with a median age of 3.5 years. Participants averaged 7.8 emergency or hospital visits in the year preceding enrollment. We observed three distinct patterns of baseline controller use: 4 patients demonstrated sustained use, 5 patients had periodic use, and 5 patients lapsed within 2 weeks. All participants initiated use of the electronic devices; however, no modem signal was transmitted for 5 or the 14 participants after a mean of 45 days. Of the 9 (64% of total) caregivers who completed the final study visit, all viewed the electronic monitoring device favorably and would recommend it to friends, and 5 (56%) believed that the device helped to improve asthma control. ACT scores improved by a mean of 2.7 points (P=.05) over the 3-month intervention. High-utilizer, minority families who completed a community health worker-delivered electronic adherence intervention found it generally acceptable. Prominent feasibility concerns, however, such as recruitment, data transmission failure, and lost devices, should be carefully considered when designing interventions in this setting.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Wenting; Zhang, Qinggang; Wang, Ruiqin

Unsaturated metal species (UMS) confined in nanomaterials play important roles for electron transfer in a wide range of catalytic reactions. However, the limited fabrication methods of UMS restrict their wider catalytic applications. Here in this paper, we report on the synergy of unsaturated Zn and Cu dopants confined in carbon dots (ZnCu-CDs) to produce enhanced electron transfer and photooxidation processes in the doped CDs. The Zn/Cu species chelate with the carbon matrix mainly through Cu-O(N)-Zn-O(N)-Cu complexes. Within this structure, Cu 2+ acts as a mild oxidizer that facilely increases the unsaturated Zn content and also precisely tunes the unsaturated Znmore » valence state to Zn d+, where d is between 1 and 2, instead of Zn. With the help of UMS, electron-transfer pathways are produced, enhancing both the electron donating (7.0 times) and-accepting (5.3 times) abilities relative to conventional CDs. Because of these synergistic effects, the photocatalytic efficiency of CDs in photooxidation reactions is shown to improve more than 5-fold.« less

Photocatalytic fluoroalkylation reactions of organic compounds.

PubMed

Barata-Vallejo, Sebastián; Bonesi, Sergio M; Postigo, Al

2015-12-14

Photocatalytic methods for fluoroalkyl-radical generation provide more convenient alternatives to the classical perfluoroalkyl-radical (Rf) production through chemical initiators, such as azo or peroxide compounds or the employment of transition metals through a thermal electron transfer (ET) initiation process. The mild photocatalytic reaction conditions tolerate a variety of functional groups and, thus, are handy to the late-stage modification of bioactive molecules. Transition metal-photocatalytic reactions for Rf radical generation profit from the redox properties of coordinatively saturated Ru or Ir organocomplexes to act as both electron donor and reductive species, thus allowing for the utilization of electron accepting and donating fluoroalkylating agents for Rf radical production. On the other hand, laboratory-available and inexpensive photoorgano catalysts (POC), in the absence of transition metals, can also act as electron exchange species upon excitation, resulting in ET reactions that produce Rf radicals. In this work, a critical account of transition metal and transition metal-free Rf radical production will be described with photoorgano catalysts, studying classical examples and the most recent investigations in the field.

Reducing electronic media use in 2-3 year-old children: feasibility and efficacy of the Family@play pilot randomised controlled trial.

PubMed

Hinkley, Trina; Cliff, Dylan P; Okely, Anthony D

2015-08-14

Participation in electronic media use among 2-3 year olds is high and associated with adverse health and developmental outcomes. This study sought to test the feasibility and potential efficacy of a family-based program to decrease electronic media (EM) use in 2-3-year-old children. Family@play was a six-session pilot randomised controlled trial delivered to parents of 2-3 year-old children from August to September 2012 in a community environment in the Illawarra region of New South Wales, Australia. Development of program content was guided by Social Cognitive and Family Systems Theories. The primary outcome was children's electronic media use. Secondary outcomes included children's time in sitting, standing and stepping. Data collectors were blinded to group allocation. Parents completed comprehensive process evaluation measures and participated in focus group discussions following completion of the program. Regression analyses were undertaken and effect sizes calculated using principles of intention to treat. Twenty-two participants (n = 12 intervention; n = 10 control) provided complete baseline data; complete data from 16 participants (n = 6 intervention; n = 10 control) were available post-intervention. Process evaluation results were high, showing the acceptability of the program. Compared with children in the control group, there were greater decreases in total EM use among children in the intervention group (adjusted difference [95 % CI] = -31.2 mins/day [-71.0-8.6] Cohen's d = 0.70). Differences for other outcomes were in the hypothesised direction and ranged from small for postural (sitting, standing, stepping) outcomes to moderate to large for individual electronic media (e.g. TV viewing, DVD/video viewing). This is the first family-based study to engage families of 2-3 year old children outside the United States and target multiple EM behaviours. Family@play was shown to be a feasible and acceptable intervention to deliver to families of 2-3 year old children. Potential efficacy is evident from moderate to large effect sizes. A larger trial is warranted to test the efficacy of the program. Australian New Zealand Clinical Trials Registry ( ACTRN12612000470897 ).

Powering microbes with electricity: direct electron transfer from electrodes to microbes.

PubMed

Lovley, Derek R

2011-02-01

The discovery of electrotrophs, microorganisms that can directly accept electrons from electrodes for the reduction of terminal electron acceptors, has spurred the investigation of a wide range of potential applications. To date, only a handful of pure cultures have been shown to be capable of electrotrophy, but this process has also been inferred in many studies with undefined consortia. Potential electron acceptors include: carbon dioxide, nitrate, metals, chlorinated compounds, organic acids, protons and oxygen. Direct electron transfer from electrodes to cells has many advantages over indirect electrical stimulation of microbial metabolism via electron shuttles or hydrogen production. Supplying electrons with electrodes for the bioremediation of chlorinated compounds, nitrate or toxic metals may be preferable to adding organic electron donors or hydrogen to the subsurface or bioreactors. The most transformative application of electrotrophy may be microbial electrosynthesis in which carbon dioxide and water are converted to multi-carbon organic compounds that are released extracellularly. Coupling photovoltaic technology with microbial electrosynthesis represents a novel photosynthesis strategy that avoids many of the drawbacks of biomass-based strategies for the production of transportation fuels and other organic chemicals. The mechanisms for direct electron transfer from electrodes to microorganisms warrant further investigation in order to optimize envisioned applications. © 2010 Society for Applied Microbiology and Blackwell Publishing Ltd.

Application of the high resolution return beam vidicon

NASA Technical Reports Server (NTRS)

Cantella, M. J.

1977-01-01

The Return Beam Vidicon (RBV) is a high-performance electronic image sensor and electrical storage component. It can accept continuous or discrete exposures. Information can be read out with a single scan or with many repetitive scans for either signal processing or display. Resolution capability is 10,000 TV lines/height, and at 100 lp/mm, performance matches or exceeds that of film, particularly with low-contrast imagery. Electronic zoom can be employed effectively for image magnification and data compression. The high performance and flexibility of the RBV permit wide application in systems for reconnaissance, scan conversion, information storage and retrieval, and automatic inspection and test. This paper summarizes the characteristics and performance parameters of the RBV and cites examples of feasible applications.

The process of accepting breast cancer among Chinese women: A grounded theory study.

PubMed

Chen, Shuang-Qin; Liu, Jun-E; Li, Zhi; Su, Ya-Li

2017-06-01

To describe the process by which Chinese women accept living with breast cancer. Individual interviews were conducted with 18 Chinese women who completed breast cancer treatment. Data were collected from September 2014 to January 2015 at a large tertiary teaching hospital in Beijing, China. In this grounded theory study, data were analyzed using constant comparative and coding analysis methods. In order to explain the process of accepting having breast cancer among women in China through the grounded theory study, a model that includes 5 axial categories was developed. Cognitive reconstruction emerged as the core category. The extent to which the women with breast cancer accepted having the disease was found to increase with the treatment stage and as their treatment stage progressed with time. The accepting process included five stages: non-acceptance, passive acceptance, willingness to accept, behavioral acceptance, and transcendence of acceptance. Our study using grounded theory study develops a model describing the process by which women accept having breast cancer. The model provides some intervention opportunities at every point of the process. Copyright © 2017. Published by Elsevier Ltd.

An Investigation of Employees' Use of E-Learning Systems: Applying the Technology Acceptance Model

ERIC Educational Resources Information Center

Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Chen, Yen-Hsun

2013-01-01

The purpose of this study is to apply the technology acceptance model to examine the employees' attitudes and acceptance of electronic learning (e-learning) systems in organisations. This study examines four factors (organisational support, computer self-efficacy, prior experience and task equivocality) that are believed to influence employees'…

Development and Validation of Mobile Learning Acceptance Measure

ERIC Educational Resources Information Center

Sharma, Sujeet Kumar; Sarrab, Mohamed; Al-Shihi, Hafedh

2017-01-01

The growth of Smartphone usage, increased acceptance of electronic learning (E-learning), the availability of high reliability mobile networks and need for flexibility in learning have resulted in the growth of mobile learning (M-learning). This has led to a tremendous interest in the acceptance behaviors related to M-learning users among the…

Photosystem I from plants as a bacterial cytochrome P450 surrogate electron donor: terminal hydroxylation of branched hydrocarbon chains.

PubMed

Jensen, Kenneth; Johnston, Jonathan B; de Montellano, Paul R Ortiz; Møller, Birger Lindberg

2012-02-01

The ability of cytochrome P450 enzymes to catalyze highly regio- and stereospecific hydroxylations makes them attractive alternatives to approaches based on chemical synthesis but they require expensive cofactors, e.g. NAD(P)H, which limits their commercial potential. Ferredoxin (Fdx) is a multifunctional electron carrier that in plants accepts electrons from photosystem I (PSI) and facilitates photoreduction of NADP(+) to NADPH mediated by ferredoxin-NAD(P)H oxidoreductase (FdR). In bacteria, the electron flow is reversed and Fdx accepts electrons from NADPH via FdR and serves as the direct electron donor to bacterial P450s. By combining the two systems, we demonstrate that irradiation of PSI can drive the activity of a bacterial P450, CYP124 from Mycobacterium tuberculosis. The substitution of the costly cofactor NADPH with sunlight illustrates the potential of the light-driven hydroxylation system for biotechnology applications.

Validation and testing of the Acceptability E-scale for Web-based patient-reported outcomes in cancer care

PubMed Central

Tariman, Joseph D.; Berry, Donna L.; Halpenny, Barbara; Wolpin, Seth; Schepp, Karen

2010-01-01

The performance of the Acceptability E-scale was tested in a sample of 627 adult and older adult patients from various oncology clinics who completed an electronic symptoms survey. The revised Acceptability E-scale has strong psychometric properties and can be useful in assessing the acceptability and usability of computerized health-related programs in oncology and other health population. PMID:20974066

Perylene Diimide Based ``Nanofabric'' Thin Films for Organic Photovoltaic Cells

NASA Astrophysics Data System (ADS)

Carter, Austin; Park, June Hyoung; Min, Yong; Epstein, Arthur

2011-03-01

We report progress in using a perylene diimide (PDI) nanofabric as an effective electron accepting nanostructure for organic photovoltaics (OPV). A key challenge in OPV continues to be the recovery of electrons after charge separation due to the relatively poor mobility of C60 and related materials. A series of PDI compounds and complexes have been synthesized and used to fabricate nanofibers and thin films using solution and vacuum deposition techniques. Overlaping PDI-based nanofibers form a fast electron-transporting ``nanofabric'' that has been characterized (AFM, PL, UV-vis, etc.) and can be blended with electron donating materials. A solution-processible OPV configuration containing a nanofabric heterojunction (FHJ) of poly(3-hexylthiophene) and the PDI nanofabric was investigated. We observed a significant improvement in power-conversion efficiency due in part to expansion of the interfacial area and the presence of high mobility electron pathways to the LiF/Al electrode. This work is supported by the Wright Center for Photovoltaic Innovation and Commercialization, the Institute for Materials Research and the Center for Affordable Nanoengineering of Polymeric Biomedical Devices.

32 CFR 1806.3 - Procedures governing acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COUNTERINTELLIGENCE CENTER PROCEDURES GOVERNING ACCEPTANCE OF SERVICE OF PROCESS § 1806.3 Procedures governing acceptance of service of process. (a) Service of Process Upon the NACIC or a NACIC Employee in an Official..., personal service of process may be accepted only by NACIC Counsel, Director, NACIC, or Deputy Director...

Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst.

PubMed

Tripathi, Pranav K; Durbach, Shane; Coville, Neil J

2017-09-22

The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman I D / I G ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst.

Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst

PubMed Central

Durbach, Shane

2017-01-01

The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman ID/IG ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst. PMID:28937596

Introduction: Background on CROMERR

EPA Pesticide Factsheets

This self-directed, online course is designed for states, tribes, and local governments that administer EPA-authorized programs under Title 40 of the Code of Federal Regulations (40 CFR) and accept or wish to accept electronic reports.

P-Care BPJS Acceptance Model in Primary Health Centers.

PubMed

Markam, Hosizah

2017-01-01

Electronic Medical Records (EMR) are increasingly adopted in healthcare facilities. Recently, implementation failure of electronic information systems is known to be caused by not only the quality of technical aspects, but also the user's behavior. It is known as applying the Technology Acceptance Model (TAM). This research aimed to analyze the acceptance model of p-care BPJS in the primary health centers. A total sample of 30 p-care BPJS users was drawn by multistage random sampling in which of these 30 primary health centers participated. Data analysis used both descriptive and inferential statistics. In the phase of structural model, it indicated that p-care BPJS acceptance model in the primary health centers was formed by Perceived Ease of Use (PEOU) and Perceived Usefulness (PU) through Attitude towards use of p-care BPJS and Behavioral Intention to use p-care BPJS.

“Terms and conditions of use” for journal articles and scholarly journals : A survey on the licensing processes associated with electronic scholarly materials

NASA Astrophysics Data System (ADS)

Hidaka, Masako

Copyright policies and terms directly affect the approach taken by journal editors, authors and readers regarding dealing with of articles and/or copyrighted materials. However Japanese academic society publishers have some trouble in licensing processes for copyrighted materials as previous studies pointed out. In 2011 we conducted a survey on “terms and conditions of use” of electronic journal and the licensing practices associated with electronic scholarly materials. The survey showed commercial publishers have enough announcements on reuse of copyrighted materials for readers. On the other hand Japanese academic societies' cares for readers tend to not enough. They publish journals both in Japanese and in English. Subsequently, English and Japanese templates of “terms and conditions of use” for Japanese academic society publishers were proposed. The templates were developed based on an understanding of the International Association of Scientific, Technical and Medical Publishers' “STM Permissions Guidelines,” which were designed to establish a standard and reasonable approach to granting permission for republication to all signatory publishers.The survey showed that Japanese academic society publishers and commercial publishers are facing the same issues regarding acceptable use of electronic supplemental materials for journal articles. This issue remains to be solved.

The relationship between physician burnout and quality of healthcare in terms of safety and acceptability: a systematic review

PubMed Central

Dewa, Carolyn S; Loong, Desmond; Bonato, Sarah; Trojanowski, Lucy

2017-01-01

Objectives This study reviews the current state of the published peer-reviewed literature related to physician burnout and two quality of care dimensions. The purpose of this systematic literature review is to address the question, ‘How does physician burnout affect the quality of healthcare related to the dimensions of acceptability and safety?’ Design Using a multiphase screening process, this systematic literature review is based on publically available peer-reviewed studies published between 2002 and 2017. Six electronic databases were searched: (1) MEDLINE Current, (2) MEDLINE In-process, (3) MEDLINE Epub Ahead of Print, (4) PsycINFO, (5) Embase and (6) Web of Science. Setting Physicians practicing in civilian settings. Participants Practicing physicians who have completed training. Primary and secondary outcome measures Quality of healthcare related to acceptability (ie, patient satisfaction, physician communication and physician attitudes) and safety (ie, minimising risks or harm to patients). Results 4114 unique citations were identified. Of these, 12 articles were included in the review. Two studies were rated as having high risk of bias and 10 as having moderate risk. Four studies were conducted in North America, four in Europe, one in the Middle East and three in East Asia. Results of this systematic literature review suggest there is moderate evidence that burnout is associated with safety-related quality of care. Because of the variability in the way patient acceptability-related quality of care was measured and the inconsistency in study findings, the evidence supporting the relationship between burnout and patient acceptability-related quality of care is less strong. Conclusions The focus on direct care-related quality highlights additional ways that physician burnout affects the healthcare system. These studies can help to inform decisions about how to improve patient care by addressing physician burnout. Continued work looking at the relationship between dimensions of acceptability-related quality of care measures and burnout is needed to advance the field. PMID:28637730

Redox equilibria in hydroxylamine oxidoreductase. Electrostatic control of electron redistribution in multielectron oxidative processes.

PubMed

Kurnikov, Igor V; Ratner, Mark A; Pacheco, A Andrew

2005-02-15

We report results of continuum electrostatics calculations of the cofactor redox potentials, and of the titratable group pK(a) values, in hydroxylamine oxidoreductase (HAO). A picture of a sophisticated multicomponent control of electron flow in the protein emerged from the studies. First, we found that neighboring heme cofactors strongly interact electrostatically, with energies of 50-100 mV. Thus, cofactor redox potentials depend on the oxidation state of other cofactors, and cofactor redox potentials in the active (partially oxidized) enzyme differ substantially from the values obtained in electrochemical redox titration experiments. We found that, together, solvent-exposed heme 1 (having a large negative redox potential) and heme 2 (having a large positive redox potential) form a lock for electrons generated during the oxidation reaction The attachment of HAO's physiological electron transfer partner cytochrome c(554) results in a positive shift in the redox potential of heme 1, and "opens the electron gate". Electrons generated as a result of hydroxylamine oxidation travel to heme 3 and heme 8, which have redox potentials close to 0 mV versus NHE (this result is in partial disagreement with an existing experimental redox potential assignment). The closeness of hemes 3 and 8 from different enzyme subunits allows redistribution of the four electrons generated as a result of hydroxylamine oxidation, among the three enzyme subunits. For the multielectron oxidation process to be maximally efficient, the redox potentials of the electron-accepting cofactors should be roughly equal, and electrostatic interactions between extra electrons on these cofactors should be minimal. The redox potential assignments presented in the paper satisfy this general rule.

Two-photon or higher-order absorbing optical materials for generation of reactive species

NASA Technical Reports Server (NTRS)

Marder, Seth R. (Inventor); Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Perry, Joseph W. (Inventor)

2003-01-01

Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

Two-photon or higher-order absorbing optical materials for generation of reactive species

NASA Technical Reports Server (NTRS)

Perry, Joseph W (Inventor); Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Marder, Seth R (Inventor)

2007-01-01

Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

Two-Photon or Higher-Order Absorbing Optical Materials for Generation of Reactive Species

NASA Technical Reports Server (NTRS)

Perry, Joseph W. (Inventor); Cumpston, Brian (Inventor); Lipson, Matthew (Inventor); Marder, Seth R. (Inventor)

2013-01-01

Disclosed are highly efficient multiphoton absorbing compounds and methods of their use. The compounds generally include a bridge of pi-conjugated bonds connecting electron donating groups or electron accepting groups. The bridge may be substituted with a variety of substituents as well. Solubility, lipophilicity, absorption maxima and other characteristics of the compounds may be tailored by changing the electron donating groups or electron accepting groups, the substituents attached to or the length of the pi-conjugated bridge. Numerous photophysical and photochemical methods are enabled by converting these compounds to electronically excited states upon simultaneous absorption of at least two photons of radiation. The compounds have large two-photon or higher-order absorptivities such that upon absorption, one or more Lewis acidic species, Lewis basic species, radical species or ionic species are formed.

Automotive Stirling Engine Mod 1 Design Review, volume 2

NASA Technical Reports Server (NTRS)

1982-01-01

The auxiliaries and the control system for the ASE MOD I: (1) provide the required fuel and air flows for a well controlled combustion process, generating heat to the Stirling cycle; (2) provide a driver acceptable method for controlling the power output of the engine; (3) provide adequate lubrication and cooling water circulation; (4) generate the electric energy required for engine and vehicle operation; (5) provide a driver acceptable method for starting, stopping and monitoring the engine; and (6) provide a guard system, that protects the engine at component or system malfunction. The control principles and the way the different components and sub-systems interact are described as well as the different auxiliaries, the air fuel system, the power control systems and the electronics. The arrangement and location of auxiliaries and other major components are also examined.

48 CFR 252.232-7003 - Electronic submission of payment requests and receiving reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... not acceptable electronic forms for submission of payment requests. However, scanned documents are... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Electronic submission of... PROVISIONS AND CONTRACT CLAUSES Text of Provisions And Clauses 252.232-7003 Electronic submission of payment...

48 CFR 252.232-7003 - Electronic submission of payment requests and receiving reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... not acceptable electronic forms for submission of payment requests. However, scanned documents are... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Electronic submission of... PROVISIONS AND CONTRACT CLAUSES Text of Provisions And Clauses 252.232-7003 Electronic submission of payment...

48 CFR 252.232-7003 - Electronic submission of payment requests and receiving reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... not acceptable electronic forms for submission of payment requests. However, scanned documents are... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Electronic submission of... PROVISIONS AND CONTRACT CLAUSES Text of Provisions And Clauses 252.232-7003 Electronic submission of payment...

48 CFR 252.232-7003 - Electronic submission of payment requests and receiving reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... not acceptable electronic forms for submission of payment requests. However, scanned documents are... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Electronic submission of... PROVISIONS AND CONTRACT CLAUSES Text of Provisions And Clauses 252.232-7003 Electronic submission of payment...

48 CFR 252.232-7003 - Electronic submission of payment requests and receiving reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... not acceptable electronic forms for submission of payment requests. However, scanned documents are... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Electronic submission of... PROVISIONS AND CONTRACT CLAUSES Text of Provisions And Clauses 252.232-7003 Electronic submission of payment...

Long-range coupling of electron-hole pairs in spatially separated organic donor-acceptor layers

PubMed Central

Nakanotani, Hajime; Furukawa, Taro; Morimoto, Kei; Adachi, Chihaya

2016-01-01

Understanding exciton behavior in organic semiconductor molecules is crucial for the development of organic semiconductor-based excitonic devices such as organic light-emitting diodes and organic solar cells, and the tightly bound electron-hole pair forming an exciton is normally assumed to be localized on an organic semiconducting molecule. We report the observation of long-range coupling of electron-hole pairs in spatially separated electron-donating and electron-accepting molecules across a 10-nanometers-thick spacer layer. We found that the exciton energy can be tuned over 100 megaelectron volts and the fraction of delayed fluorescence can be increased by adjusting the spacer-layer thickness. Furthermore, increasing the spacer-layer thickness produced an organic light-emitting diode with an electroluminescence efficiency nearly eight times higher than that of a device without a spacer layer. Our results demonstrate the first example of a long-range coupled charge-transfer state between electron-donating and electron-accepting molecules in a working device. PMID:26933691

Two neutron correlations in photo-fission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, D. S.; Kosinov, O.; Forest, T.

2016-01-01

A large body of experimental work has established the strong kinematical correlation between fission fragments and fission neutrons. Here, we report on the progress of investigations of the potential for strong two neutron correlations arising from the nearly back-to-back nature of the two fission fragments that emit these neutrons in the photo-fission process. In initial measurements, a pulsed electron linear accelerator was used to generate bremsstrahlung photons that impinged upon an actinide target, and the energy and opening angle distributions of coincident neutrons were measured using a large acceptance neutron detector array. A planned comprehensive set of measurements of twomore » neutron correlations in the photo-fission of actinides is expected to shed light on several fundamental aspects of the fission process including the multiplicity distributions associated with the light and heavy fission fragments, the nuclear temperatures of the fission fragments, and the mass distribution of the fission fragments as a function of energy released. In addition to these measurements providing important nuclear data, the unique kinematics of fission and the resulting two neutron correlations have the potential to be the basis for a new tool to detect fissionable materials. A key technical challenge of this program arises from the need to perform coincidence measurements with a low duty factor, pulsed electron accelerator. This has motivated the construction of a large acceptance neutron detector array, and the development of data analysis techniques to directly measure uncorrelated two neutron backgrounds.« less

Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

PubMed

Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

2016-06-01

A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

Advancements in internationally accepted standards for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, Harry; Derr, Donald D.; Vehar, David W.

1993-10-01

Three subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Subcommittee E10.01 "Dosimetry for Radiation Processing" has published 9 standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems. The group is also developing standards on how to use gamma, electron beam, and x-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers. Subcommittee F10.10 "Food Processing and Packaging" has completed standards on good irradiation practices for meat and poultry and for fresh fruits, and is developing similar standards for the irradiation of seafood and spices. These food-related standards are based on practices previously published by ICGFI. Subcommittee E10.07 on "Radiation Dosimetry for Radiation Effects on Materials and Devices" principally develops standards for determining doses for radiation hardness testing of electronics. Some, including their standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications.

Commercial printing and electronic color printing

NASA Astrophysics Data System (ADS)

Webb, Joseph W.

1995-04-01

Technologies such as Xeikon, Indigo, and the Heidelberg/Presstek GTO-DI can change both the way print buyers may purchase printed material and the way printers and trade services respond to changing demands. Our recent study surveys the graphic arts industry for their current views of these new products and provides forecasts of installations and usage with breakdowns by market segment and size of firm. The acceptance of desktop publishing and electronic prepress have not only paved the way for a totally electronic printing process, but it has broadened the base of people who develop color originals for reproduction. Electronic printing adds the ability to customize jobs on the fly. How print providers will respond to the impact of electronic color printing depends on how each firm perceives the 'threat.' Most printing companies are run by entrepreneurial individuals who have, as their highest priority, their own economic survival. Service bureaus are already looking at electronic color printing as yet another way to differentiate their businesses. The study was based on a mail survey with 682 responses from graphic arts firms, interviews with printers, suppliers, associations and industry executives, and detailed secondary research. Results of a new survey in progress in January 1995 is also presented.

Laboratory Studies of Charging Properties of Dust Grains in Astrophysical/Planetary Environments

NASA Technical Reports Server (NTRS)

Tankosic, D.; Abbas, M. M.

2012-01-01

Dust grains in various astrophysical environments are generally charged electrostatically by photoelectric emissions with UV/X-ray radiation, as well as by electron/ion impact. Knowledge of physical and optical properties of individual dust grains is required for understanding of the physical and dynamical processes in space environments and the role of dust in formation of stellar and planetary systems. In this paper we focus on charging of individual micron/submicron dust grains by processes that include: (a) UV photoelectric emissions involving incident photon energies higher than the work function of the material and b) electron impact, where low energy electrons are scattered or stick to the dust grains, thereby charging the dust grains negatively, and at sufficiently high energies the incident electrons penetrate the grain leading to excitation and emission of electrons referred to as secondary electron emission (SEE). It is well accepted that the charging properties of individual micron/submicron size dust grains are expected to be substantially different from the bulk materials. However, no viable models for calculation of the charging properties of individual micron size dust grains are available at the present time. Therefore, the photoelectric yields, and secondary electron emission yields of micron-size dust grains have to be obtained by experimental methods. Currently, very limited experimental data are available for charging of individual micron-size dust grains. Our experimental results, obtained on individual, micron-size dust grains levitated in an electrodynamic balance facility (at NASA-MSFC), show that: (1) The measured photoelectric yields are substantially higher than the bulk values given in the literature and indicate a particle size dependence with larger particles having order-of-magnitude higher values than for submicron-size grains; (2) dust charging by low energy electron impact is a complex process. Also, our measurements indicate that the electron impact may lead to charging or discharging of dust grains depending upon the grain size, surface potential, electron energy, electron flux, grain composition, and configuration (e.g. Abbas et al, 2010). Laboratory measurements on charging of analogs of the interstellar dust as well as Apollo 11 dust grains conducted at the NASA-MSFC Dusty Plasma Lab. are presented here

Women in Physics in Germany, 2008

NASA Astrophysics Data System (ADS)

Kluge, Hanna

2009-04-01

The status of women in physics in Germany has not changed dramatically in the three years since the last IUPAP Women in Physics Conference was held in 2005. The salary of a woman remains approximately 25% lower than that of a man in a comparable professional position. The number of female professors is growing slowly. The number of young women beginning to study physics is around 20%. There is, however, a noticeable increase in organization and societal acceptance of female physicists, and an increasing amount of men taking part in this process. There is also increased acceptance and support of dual-career couples. The Helmholtz Alliance for "Physics at the Terascale" founded a dual-career option program. In 2008, the annual Conference of German Female Physicists (DPT) held in Muenster became an official conference of the DPG (German Physical Society). Various scientific groups working for equal opportunity have formed a "network of networks." At the DESY (German Electron Synchrotron), a group of women led by an equal opportunity officer is involved in the entire process of hiring new staff members in all positions, including directors.

76 FR 51128 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... duty; alternate work schedules, standards of conduct and ethics programs; indebtedness; employee... stored on paper, microform, or in electronic media. Retrievability: By name, social security number, or... maceration. Records in electronic media are electronically erased using accepted techniques. System Manager...

Personalized Guideline-Based Treatment Recommendations Using Natural Language Processing Techniques.

PubMed

Becker, Matthias; Böckmann, Britta

2017-01-01

Clinical guidelines and clinical pathways are accepted and proven instruments for quality assurance and process optimization. Today, electronic representation of clinical guidelines exists as unstructured text, but is not well-integrated with patient-specific information from electronic health records. Consequently, generic content of the clinical guidelines is accessible, but it is not possible to visualize the position of the patient on the clinical pathway, decision support cannot be provided by personalized guidelines for the next treatment step. The Systematized Nomenclature of Medicine - Clinical Terms (SNOMED CT) provides common reference terminology as well as the semantic link for combining the pathways and the patient-specific information. This paper proposes a model-based approach to support the development of guideline-compliant pathways combined with patient-specific structured and unstructured information using SNOMED CT. To identify SNOMED CT concepts, a software was developed to extract SNOMED CT codes out of structured and unstructured German data to map these with clinical pathways annotated in accordance with the systematized nomenclature.

Prompt Electron Production in Electron-Positron Annihilations at 29 GEV.

NASA Astrophysics Data System (ADS)

Koop, Dale E.

We have studied the production of prompt electrons in high statistics sample (118 pb('-1)) of multihadron events produced in electron positron annihilations at 29 Gev. The experiment was performed using the DELCO facility on the PEP storage ring at SLAC. Electron identification was done primarily with a large acceptance threshold Cerenkov counter. Both the momentum and the transverse momentum spectra are measured in terms of a differential cross section for electrons having momenta in the range 0.5 < P < 5.5 Gev/c. We measure the inclusive cross section in this momentum range to be 35.8 (+OR-) 3.1 pb. The final distribution of candidates in the P - P(,(PERP)) plane are fit well using a Monte Carlo having a combination of bottom and charm quark decays with the semielectronic branching ratios of (15.0 (+OR-) 2.9)% and (8.9 (+OR-) 1.4)%. We observe no evidence of electron production from new sources and determine a cross section upper limit of 11.6 pb (90% CL) for this process. We find that the fragmentation functions are hard for both b and c quarks, characterized by the values < z(,b) > = 0.77 + 0.05 and < z(,c) > = 0.68 (+OR -) 0.06, where z is the fraction of the heavy quark's energy that is retained by the primary hadron containing the heavy quark. The fragmentation function is fit well by the form. (DIAGRAM, TABLE OR GRAPHIC OMITTED...PLEASE SEE DAI). Finally, we observe events having two electrons with an inclusive cross section of 2.8 (+OR-) 1.3 pb for this process, which is consistent with the rate expected from the measured semielectronic rates.

A DSP-based readout and online processing system for a new focal-plane polarimeter at AGOR

NASA Astrophysics Data System (ADS)

Hagemann, M.; Bassini, R.; van den Berg, A. M.; Ellinghaus, F.; Frekers, D.; Hannen, V. M.; Häupke, T.; Heyse, J.; Jacobs, E.; Kirsch, M.; Krüsemann, B.; Rakers, S.; Sohlbach, H.; Wörtche, H. J.

1999-11-01

A Focal-Plane Polarimeter (FPP) for the large acceptance Big-Bite Spectrometer (BBS) at AGOR using a novel readout architecture has been commissioned at the KVI Groningen. The instrument is optimized for medium-energy polarized proton scattering near or at 0°. For the handling of the high counting rates at extreme forward angles and for the suppression of small-angle scattering in the graphite analyzer, a high-performance data processing DSP system connecting to the LeCroy FERA and PCOS ECL bus architecture has been made operational and tested successfully. Details of the system and the functions of the various electronic components are described.

Modified SPC for short run test and measurement process in multi-stations

NASA Astrophysics Data System (ADS)

Koh, C. K.; Chin, J. F.; Kamaruddin, S.

2018-03-01

Due to short production runs and measurement error inherent in electronic test and measurement (T&M) processes, continuous quality monitoring through real-time statistical process control (SPC) is challenging. Industry practice allows the installation of guard band using measurement uncertainty to reduce the width of acceptance limit, as an indirect way to compensate the measurement errors. This paper presents a new SPC model combining modified guard band and control charts (\\bar{\\text{Z}} chart and W chart) for short runs in T&M process in multi-stations. The proposed model standardizes the observed value with measurement target (T) and rationed measurement uncertainty (U). S-factor (S f) is introduced to the control limits to improve the sensitivity in detecting small shifts. The model was embedded in automated quality control system and verified with a case study in real industry.

Electronic Adherence Monitoring in a High-Utilizing Pediatric Asthma Cohort: A Feasibility Study

PubMed Central

Chang, Joyce; Wynter, Sheri-Ann; Fowler, Jessica C; Long, Jin; Bryant-Stephens, Tyra C

2016-01-01

Background Inner-city, minority children with asthma have the highest rates of morbidity and death from asthma and the lowest rates of asthma controller medication adherence. Some recent electronic medication monitoring interventions demonstrated dramatic improvements in adherence in lower-risk populations. The feasibility and acceptability of such an intervention in the highest-risk children with asthma has not been studied. Objective Our objective was to assess the feasibility and acceptability of a community health worker-delivered electronic adherence monitoring intervention among the highest utilizers of acute asthma care in an inner-city practice. Methods This was a prospective cohort pilot study targeting children with the highest frequency of asthma-related emergency department and hospital care within a local managed care Medicaid plan. The 3-month intervention included motivational interviewing, electronic monitoring of controller and rescue inhaler use, and outreach by a community health worker for predefined medication alerts. We measured acceptability by using a modified technology acceptability model and changes in asthma control using the Asthma Control Test (ACT). Given prominent feasibility issues, we describe qualitative patterns of medication use at baseline only. Results We enrolled 14 non-Hispanic black children with a median age of 3.5 years. Participants averaged 7.8 emergency or hospital visits in the year preceding enrollment. We observed three distinct patterns of baseline controller use: 4 patients demonstrated sustained use, 5 patients had periodic use, and 5 patients lapsed within 2 weeks. All participants initiated use of the electronic devices; however, no modem signal was transmitted for 5 or the 14 participants after a mean of 45 days. Of the 9 (64% of total) caregivers who completed the final study visit, all viewed the electronic monitoring device favorably and would recommend it to friends, and 5 (56%) believed that the device helped to improve asthma control. ACT scores improved by a mean of 2.7 points (P=.05) over the 3-month intervention. Conclusions High-utilizer, minority families who completed a community health worker-delivered electronic adherence intervention found it generally acceptable. Prominent feasibility concerns, however, such as recruitment, data transmission failure, and lost devices, should be carefully considered when designing interventions in this setting. PMID:27335355

Real Time Quantification of Ultrafast Photoinduced Bimolecular Electron Transfer Rate: Direct Probing of the Transient Intermediate.

PubMed

Mukherjee, Puspal; Biswas, Somnath; Sen, Pratik

2015-08-27

Fluorescence quenching studies through steady-state and time-resolved measurements are inadequate to quantify the bimolecular electron transfer rate in bulk homogeneous solution due to constraints from diffusion. To nullify the effect of diffusion, direct evaluation of the rate of formation of a transient intermediate produced upon the electron transfer is essential. Methyl viologen, a well-known electron acceptor, produces a radical cation after accepting an electron, which has a characteristic strong and broad absorption band centered at 600 nm. Hence it is a good choice to evaluate the rate of photoinduced electron transfer reaction employing femtosecond broadband transient absorption spectroscopy. The time constant of the aforementioned process between pyrene and methyl viologen in methanol has been estimated to be 2.5 ± 0.4 ps using the same technique. The time constant for the backward reaction was found to be 14 ± 1 ps. These values did not change with variation of concentration of quencher, i.e., methyl viologen. Hence, we can infer that diffusion has no contribution in the estimation of rate constants. However, on changing the solvent from methanol to ethanol, the time constant of the electron transfer reaction has been found to increase and has accounted for the change in solvent reorganization energy.

The G3 Experience with Electronic Publishing: An Editor's Perspective

NASA Astrophysics Data System (ADS)

White, W. M.

2003-12-01

G3 (Geochemistry, Geophysics, Geosystems) is an all-electronic journal published jointly by the AGU, the Geochemical Society, and the European Association of Geochemistry. G3 publishes original scientific contributions pertaining to understanding the Earth as a system, including relevant observational, experimental, and theoretical investigations of the solid Earth, hydrosphere, atmosphere, and biosphere. The journal was initiated as a result of a grass roots effort with the following goals in mind: a copyright policy designed to enhance, rather than inhibit, the dissemination of scientific information (for example, allowing authors to post electronic reprints on their web sites), provide a means of publishing, in immediately useable formats, large data sets, provide a means for ready dissemination of computer modeling and analysis tools, and provide a forum where authors could use novel ways of illustrating both data and models (e.g., formats such as movies, virtual reality images, sound, mathematical models, etc.), and finally to reduce costs and speed publication. In most respects, G3 has been enormously successful and has met most of its goals. G3 began publishing in December of 1999; in the subsequent 3 1/2 years 625 papers have been submitted to it and 325 have been published. It currently has over 600 institutional and personal subscribers. Papers are submitted through the web (a variety of formats are accepted, however, Microsoft Word is most common) and are converted to Adobe pdf format for peer review. Except that it is fully electronic using the web and e-mail, the peer review process is traditional, which insures the quality of the papers published. Accepted papers are copyedited and converted to SGML for archival purposes. HTML and Acrobat pdf versions are then generated from the SGML and published as they are ready on the G3 web site (www.g-cubed.org). Large data sets are routinely published in digital formats that can be readily downloaded by readers and immediately imported into programs such as Excel. Numerous animations and movies have been published in animated GIF, Apple Quicktime, Macromedia Flash, and Wolfram Research Mathreader formats. Computer models and tools have been published as Excel Macros and MATLAB Scripts. Full color, high resolution images allow superior publication of detailed maps and photographs. While G3 is a success by most measures, the process of pioneering electronic publication has at times been painful and frustrating. Early on, there were problems and delays in converting files, particularly graphics, to pdf format for both review and final publication. Costs have been higher than anticipated - primarily due to the cost of file conversion and formatting. The time from acceptance to publication (currently 10 weeks), although improving, it still longer than the goal, again because of the time required for copy-editing and formatting. Automation of this process in the future is the primary opportunity to both reduce cost and further speed publication. Authors have been slow to take advantage of the new illustration formats, with most relying on tradition figures instead. This will likely change slowly in the future, as these new formats, and the software tools to create them, become more familiar.

A head-up display for low-visibility approach and landing

NASA Technical Reports Server (NTRS)

Bray, R. S.; Scott, B. C.

1981-01-01

An electronic flight-guidance display format was designed for use in evaluations of the collimated head-up display concept in low-visibility landings of transport aircraft. In the design process of iterative evaluation and modification, some general principles, or guidelines, applicable to such flight displays were suggested. The usefulness of an indication of instantaneous inertial flightpath was clearly demonstrated, particularly in low-altitude transition to visual references. Evaluator pilot acceptance of the unfamiliar display concepts was very positive when careful attention was given to indoctrination and training.

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

Characterization of a Two-Stage Pulse Tube Cooler for Space Applications

NASA Astrophysics Data System (ADS)

Orsini, R.; Nguyen, T.; Colbert, R.; Raab, J.

2010-04-01

A two-stage long-life, low mass and efficient pulse tube cooler for space applications has been developed and acceptance tested for flight applications. This paper presents the data collected on four flight coolers during acceptance testing. Flight acceptance test of these cryocoolers includes thermal performance mapping over a range of reject temperatures, launch vibration testing and thermal cycling testing. Designed conservatively for a 10-year life, the coolers are required to provide simultaneous cooling powers at 95 K and 180 K while rejecting to 300 K with less than 187 W input power to the electronics. The total mass of each cooler and electronics system is 8.7 kg. The radiation-hardened and software driven control electronics provides cooler control functions which are fully re-configurable in orbit. These functions include precision temperature control to better than 100 mK p-p. This 2 stage cooler has heritage to the 12 Northrop Grumman Aerospace Systems (NGAS) coolers currently on orbit with 2 operating for more than 11.5 years.

Frequency domain laser velocimeter signal processor: A new signal processing scheme

NASA Technical Reports Server (NTRS)

Meyers, James F.; Clemmons, James I., Jr.

1987-01-01

A new scheme for processing signals from laser velocimeter systems is described. The technique utilizes the capabilities of advanced digital electronics to yield a smart instrument that is able to configure itself, based on the characteristics of the input signals, for optimum measurement accuracy. The signal processor is composed of a high-speed 2-bit transient recorder for signal capture and a combination of adaptive digital filters with energy and/or zero crossing detection signal processing. The system is designed to accept signals with frequencies up to 100 MHz with standard deviations up to 20 percent of the average signal frequency. Results from comparative simulation studies indicate measurement accuracies 2.5 times better than with a high-speed burst counter, from signals with as few as 150 photons per burst.

Metabolic adaptation and in situ attenuation of chlorinated ethenes by naturally occurring microorganisms in a fractured dolomite aquifer near Niagara Falls, New York

USGS Publications Warehouse

Yager, R.M.; Bilotta, S.E.; Mann, C.L.; Madsen, E.L.

1997-01-01

A combination of hydrogeological, geochemical, and microbiological methods was used to document the biotransformation of trichloroethene (TCE) to ethene, a completely dechlorinated and environmentally benign compound, by naturally occurring microorganisms within a fractured dolomite aquifer. Analyses of groundwater samples showed that three microbially produced TCE breakdown products (cis-1,2-dichloroethene, vinyl chloride, and ethene) were present in the contaminant plume. Hydrogen (H2) concentrations in groundwater indicated that iron reduction was the predominant terminal electron-accepting process in the most contaminated geologic zone of the site. Laboratory microcosms prepared with groundwater demonstrated complete sequential dechlorination of TCE to ethene. Microcosm assays also revealed that reductive dechlorination activity was present in waters from the center but not from the periphery of the contaminant plume. This dechlorination activity indicated that naturally occurring microorganisms have adapted to utilize chlorinated ethenes and suggested that dehalorespiring rather than cometabolic, microbial processes were the cause of the dechlorination. The addition of pulverized dolomite to microcosms enhanced the rate of reductive dechlorination, suggesting that hydrocarbons in the dolomite aquifer may serve as electron donors to drive microbially mediated reductive dechlorination reactions. Biodegradation of the chlorinated ethenes appears to contribute significantly to decontamination of the site.A combination of hydrogeological, geochemical, and microbiological methods was used to document the biotransformation of trichloroethene (TCE) to ethene, a completely dechlorinated and environmentally benign compound, by naturally occurring microorganisms within a fractured dolomite aquifer. Analyses of groundwater samples showed that three microbially produced TCE breakdown products (cis-1,2-dichloroethene, vinyl chloride, and ethene) were present in the contaminant plume. Hydrogen (H2) concentrations in groundwater indicated that iron reduction was the predominant terminal electron-accepting process in the most contaminated geologic zone of the site. Laboratory microcosms prepared with groundwater demonstrated complete sequential dechlorination of TCE to ethene. Microcosm assays also revealed that reductive dechlorination activity was present in waters from the center but not from the periphery of the contaminant plume. This dechlorination activity indicated that naturally occurring microorganisms have adapted to utilize chlorinated ethenes and suggested that dehalorespiring rather than cometabolic, microbial processes were the cause of the dechlorination. The addition of pulverized dolomite to microcosms enhanced the rate of reductive dechlorination, suggesting that hydrocarbons in the dolomite aquifer may serve as electron donors to drive microbially mediated reductive dechlorination reactions. Biodegradation of the chlorinated ethenes appears to contribute significantly to decontamination of the site.

Synergies between Unsaturated Zn/Cu Doping Sites in Carbon Dots Provide New Pathways for Photocatalytic Oxidation

DOE PAGES

Wu, Wenting; Zhang, Qinggang; Wang, Ruiqin; ...

2017-12-07

Unsaturated metal species (UMS) confined in nanomaterials play important roles for electron transfer in a wide range of catalytic reactions. However, the limited fabrication methods of UMS restrict their wider catalytic applications. Here in this paper, we report on the synergy of unsaturated Zn and Cu dopants confined in carbon dots (ZnCu-CDs) to produce enhanced electron transfer and photooxidation processes in the doped CDs. The Zn/Cu species chelate with the carbon matrix mainly through Cu-O(N)-Zn-O(N)-Cu complexes. Within this structure, Cu 2+ acts as a mild oxidizer that facilely increases the unsaturated Zn content and also precisely tunes the unsaturated Znmore » valence state to Zn d+, where d is between 1 and 2, instead of Zn. With the help of UMS, electron-transfer pathways are produced, enhancing both the electron donating (7.0 times) and-accepting (5.3 times) abilities relative to conventional CDs. Because of these synergistic effects, the photocatalytic efficiency of CDs in photooxidation reactions is shown to improve more than 5-fold.« less

37 CFR 104.12 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OFFICE, DEPARTMENT OF COMMERCE ADMINISTRATION LEGAL PROCESSES Service of Process § 104.12 Acceptance of service of process. (a) Any summons and complaint to be served in person or by registered or certified...). (f) The Office will only accept service of process for an employee in the employee's official...

Quality and Certification of Electronic Health Records

PubMed Central

Hoerbst, A.; Ammenwerth, E.

2010-01-01

Background Numerous projects, initiatives, and programs are dedicated to the development of Electronic Health Records (EHR) worldwide. Increasingly more of these plans have recently been brought from a scientific environment to real life applications. In this context, quality is a crucial factor with regard to the acceptance and utility of Electronic Health Records. However, the dissemination of the existing quality approaches is often rather limited. Objectives The present paper aims at the description and comparison of the current major quality certification approaches to EHRs. Methods A literature analysis was carried out in order to identify the relevant publications with regard to EHR quality certification. PubMed, ACM Digital Library, IEEExplore, CiteSeer, and Google (Scholar) were used to collect relevant sources. The documents that were obtained were analyzed using techniques of qualitative content analysis. Results The analysis discusses and compares the quality approaches of CCHIT, EuroRec, IHE, openEHR, and EN13606. These approaches differ with regard to their focus, support of service-oriented EHRs, process of (re-)certification and testing, number of systems certified and tested, supporting organizations, and regional relevance. Discussion The analyzed approaches show differences with regard to their structure and processes. System vendors can exploit these approaches in order to improve and certify their information systems. Health care organizations can use these approaches to support selection processes or to assess the quality of their own information systems. PMID:23616834

Electronic paper rewrites the rulebook for displays

NASA Astrophysics Data System (ADS)

Graham-Rowe, Duncan

2007-05-01

Following years of development, electronic paper is now entering ebooks, mobile phones and signs, and, as Duncan Graham-Rowe reports, is starting to gain the market acceptance that it has long strived for.

Cytochrome b 6 f function and localization, phosphorylation state of thylakoid membrane proteins and consequences on cyclic electron flow.

PubMed

Dumas, Louis; Chazaux, Marie; Peltier, Gilles; Johnson, Xenie; Alric, Jean

2016-09-01

Both the structure and the protein composition of thylakoid membranes have an impact on light harvesting and electron transfer in the photosynthetic chain. Thylakoid membranes form stacks and lamellae where photosystem II and photosystem I localize, respectively. Light-harvesting complexes II can be associated to either PSII or PSI depending on the redox state of the plastoquinone pool, and their distribution is governed by state transitions. Upon state transitions, the thylakoid ultrastructure and lateral distribution of proteins along the membrane are subject to significant rearrangements. In addition, quinone diffusion is limited to membrane microdomains and the cytochrome b 6 f complex localizes either to PSII-containing grana stacks or PSI-containing stroma lamellae. Here, we discuss possible similarities or differences between green algae and C3 plants on the functional consequences of such heterogeneities in the photosynthetic electron transport chain and propose a model in which quinones, accepting electrons either from PSII (linear flow) or NDH/PGR pathways (cyclic flow), represent a crucial control point. Our aim is to give an integrated description of these processes and discuss their potential roles in the balance between linear and cyclic electron flows.

Factors influencing the adoption of health information technologies: a systematic review

PubMed Central

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-01-01

Introduction The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. Methods This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004–2014 period. Results The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. Conclusion By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased. PMID:27757179

Factors influencing the adoption of health information technologies: a systematic review.

PubMed

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-08-01

The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004-2014 period. The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased.

76 FR 39792 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish in the Bering Sea and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

.... NMFS will accept anonymous comments. Enter ``N/A'' in the required fields, if you wish to remain anonymous. Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or...

15 CFR 15.3 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Acceptance of service of process. 15.3... Process § 15.3 Acceptance of service of process. (a) Except as otherwise provided in this subpart, any... employee by law is to be served personally with process. Service of process in this case is inadequate when...

76 FR 53712 - Notice of Request for the Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-29

...: http://www.regulations.gov . Follow the instructions for submitting comments on the U.S. Government... accepting electronic comments.) All electronic submissions must be made to the U.S. Government electronic... laws. Respondents: State and local government, private non-profit organizations and public...

Public Acceptability in the UK and USA of Nudging to Reduce Obesity: The Example of Reducing Sugar-Sweetened Beverages Consumption.

PubMed

Petrescu, Dragos C; Hollands, Gareth J; Couturier, Dominique-Laurent; Ng, Yin-Lam; Marteau, Theresa M

2016-01-01

"Nudging"-modifying environments to change people's behavior, often without their conscious awareness-can improve health, but public acceptability of nudging is largely unknown. We compared acceptability, in the United Kingdom (UK) and the United States of America (USA), of government interventions to reduce consumption of sugar-sweetened beverages. Three nudge interventions were assessed: i. reducing portion Size, ii. changing the Shape of the drink containers, iii. changing their shelf Location; alongside two traditional interventions: iv. Taxation and v. Education. We also tested the hypothesis that describing interventions as working through non-conscious processes decreases their acceptability. Predictors of acceptability, including perceived intervention effectiveness, were also assessed. Participants (n = 1093 UK and n = 1082 USA) received a description of each of the five interventions which varied, by randomisation, in how the interventions were said to affect behaviour: (a) via conscious processes; (b) via non-conscious processes; or (c) no process stated. Acceptability was derived from responses to three items. Levels of acceptability for four of the five interventions did not differ significantly between the UK and US samples; reducing portion size was less accepted by the US sample. Within each country, Education was rated as most acceptable and Taxation the least, with the three nudge-type interventions rated between these. There was no evidence to support the study hypothesis: i.e. stating that interventions worked via non-conscious processes did not decrease their acceptability in either the UK or US samples. Perceived effectiveness was the strongest predictor of acceptability for all interventions across the two samples. In conclusion, nudge interventions to reduce consumption of sugar-sweetened beverages seem similarly acceptable in the UK and USA, being more acceptable than taxation, but less acceptable than education. Contrary to prediction, we found no evidence that highlighting the non-conscious processes by which nudge interventions may work decreases their acceptability. However, highlighting the effectiveness of all interventions has the potential to increase their acceptability.

Study on Synergistic Mechanism of Inhibitor Mixture Based on Electron Transfer Behavior

PubMed Central

Han, Peng; He, Yang; Chen, Changfeng; Yu, Haobo; Liu, Feng; Yang, Hong; Ma, Yue; Zheng, Yanjun

2016-01-01

Mixing is an important method to improve the performance of surfactants due to their synergistic effect. The changes in bonding interaction and adsorption structure of IM and OP molecules before and after co-adsorbed on Fe(001) surface is calculated by DFTB+ method. It is found that mixture enable the inhibitor molecules with higher EHOMO donate more electrons while the inhibitor molecules with lower ELUMO accept more electrons, which strengthens the bonding interaction of both inhibitor agent and inhibitor additive with metal surface. Meanwhile, water molecules in the compact layer of double electric layer are repulsed and the charge transfer resistance during the corrosion process increases. Accordingly, the correlation between the frontier orbital (EHOMO and ELUMO of inhibitor molecules and the Fermi level of metal) and inhibition efficiency is determined. Finally, we propose a frontier orbital matching principle for the synergistic effect of inhibitors, which is verified by electrochemical experiments. This frontier orbital matching principle provides an effective quantum chemistry calculation method for the optimal selection of inhibitor mixture. PMID:27671332

Electron transport in gated InGaAs and InAsP quantum well wires in selectively grown InP ridge structures

NASA Astrophysics Data System (ADS)

Granger, G.; Kam, A.; Studenikin, S. A.; Sachrajda, A. S.; Aers, G. C.; Williams, R. L.; Poole, P. J.

2010-09-01

The purpose of this work is to fabricate ribbon-like InGaAs and InAsP wires embedded in InP ridge structures and investigate their transport properties. The InP ridge structures that contain the wires are selectively grown by chemical beam epitaxy (CBE) on pre-patterned InP substrates. To optimize the growth and micro-fabrication processes for electronic transport, we explore the Ohmic contact resistance, the electron density, and the mobility as a function of the wire width using standard transport and Shubnikov-de Haas measurements. At low temperatures the ridge structures reveal reproducible mesoscopic conductance fluctuations. We also fabricate ridge structures with submicron gate electrodes that exhibit non-leaky gating and good pinch-off characteristics acceptable for device operation. Using such wrap gate electrodes, we demonstrate that the wires can be split to form quantum dots evidenced by Coulomb blockade oscillations in transport measurements.

Governance and oversight of researcher access to electronic health data: the role of the Independent Scientific Advisory Committee for MHRA database research, 2006-2015.

PubMed

Waller, P; Cassell, J A; Saunders, M H; Stevens, R

2017-03-01

In order to promote understanding of UK governance and assurance relating to electronic health records research, we present and discuss the role of the Independent Scientific Advisory Committee (ISAC) for MHRA database research in evaluating protocols proposing the use of the Clinical Practice Research Datalink. We describe the development of the Committee's activities between 2006 and 2015, alongside growth in data linkage and wider national electronic health records programmes, including the application and assessment processes, and our approach to undertaking this work. Our model can provide independence, challenge and support to data providers such as the Clinical Practice Research Datalink database which has been used for well over 1,000 medical research projects. ISAC's role in scientific oversight ensures feasible and scientifically acceptable plans are in place, while having both lay and professional membership addresses governance issues in order to protect the integrity of the database and ensure that public confidence is maintained.

Optimization of arsenic removal water treatment system through characterization of terminal electron accepting processes.

PubMed

Upadhyaya, Giridhar; Clancy, Tara M; Brown, Jess; Hayes, Kim F; Raskin, Lutgarde

2012-11-06

Terminal electron accepting process (TEAP) zones developed when a simulated groundwater containing dissolved oxygen (DO), nitrate, arsenate, and sulfate was treated in a fixed-bed bioreactor system consisting of two reactors (reactors A and B) in series. When the reactors were operated with an empty bed contact time (EBCT) of 20 min each, DO-, nitrate-, sulfate-, and arsenate-reducing TEAP zones were located within reactor A. As a consequence, sulfate reduction and subsequent arsenic removal through arsenic sulfide precipitation and/or arsenic adsorption on or coprecipitation with iron sulfides occurred in reactor A. This resulted in the removal of arsenic-laden solids during backwashing of reactor A. To minimize this by shifting the sulfate-reducing zone to reactor B, the EBCT of reactor A was sequentially lowered from 20 min to 15, 10, and 7 min. While 50 mg/L (0.81 mM) nitrate was completely removed at all EBCTs, more than 90% of 300 μg/L (4 μM) arsenic was removed with the total EBCT as low as 27 min. Sulfate- and arsenate-reducing bacteria were identified throughout the system through clone libraries and quantitative PCR targeting the 16S rRNA, dissimilatory (bi)sulfite reductase (dsrAB), and dissimilatory arsenate reductase (arrA) genes. Results of reverse transcriptase (RT) qPCR of partial dsrAB (i.e., dsrA) and arrA transcripts corresponded with system performance. The RT qPCR results indicated colocation of sulfate- and arsenate-reducing activities, in the presence of iron(II), suggesting their importance in arsenic removal.

Perceived usefulness and perceived ease of use of electronic health records among nurses: Application of Technology Acceptance Model.

PubMed

Tubaishat, Ahmad

2017-09-18

Electronic health records (EHRs) are increasingly being implemented in healthcare organizations but little attention has been paid to the degree to which nurses as end-users will accept these systems and subsequently use them. To explore nurses' perceptions of usefulness and ease-of-use of EHRs. The relationship between these constructs was examined, and its predictors were studied. A national exploratory study was conducted with 1539 nurses from 15 randomly selected hospitals, representative of different regions and healthcare sectors in Jordan. Data were collected using a self-administered questionnaire, which was based on the Technology Acceptance Model. Correlations and linear multiple regression were utilized to analyze the data. Jordanian nurses demonstrated a positive perception of the usefulness and ease-of-use of EHRs, and subsequently accepted the technology. Significant positive correlations were found between these two constructs. The variables that predict usefulness were the gender, professional rank, EHR experience, and computer skills of the nurses. The perceived ease-of-use was affected by nursing and EHR experience, and computers skills. This study adds to the growing body of knowledge on issues related to the acceptance of technology in the health informatics field, focusing on nurses' acceptance of EHRs.

Determination of dominant biogeochemical processes in a contaminated aquifer-wetland system using multivariate statistical analysis

USGS Publications Warehouse

Baez-Cazull, S. E.; McGuire, J.T.; Cozzarelli, I.M.; Voytek, M.A.

2008-01-01

Determining the processes governing aqueous biogeochemistry in a wetland hydrologically linked to an underlying contaminated aquifer is challenging due to the complex exchange between the systems and their distinct responses to changes in precipitation, recharge, and biological activities. To evaluate temporal and spatial processes in the wetland-aquifer system, water samples were collected using cm-scale multichambered passive diffusion samplers (peepers) to span the wetland-aquifer interface over a period of 3 yr. Samples were analyzed for major cations and anions, methane, and a suite of organic acids resulting in a large dataset of over 8000 points, which was evaluated using multivariate statistics. Principal component analysis (PCA) was chosen with the purpose of exploring the sources of variation in the dataset to expose related variables and provide insight into the biogeochemical processes that control the water chemistry of the system. Factor scores computed from PCA were mapped by date and depth. Patterns observed suggest that (i) fermentation is the process controlling the greatest variability in the dataset and it peaks in May; (ii) iron and sulfate reduction were the dominant terminal electron-accepting processes in the system and were associated with fermentation but had more complex seasonal variability than fermentation; (iii) methanogenesis was also important and associated with bacterial utilization of minerals as a source of electron acceptors (e.g., barite BaSO4); and (iv) seasonal hydrological patterns (wet and dry periods) control the availability of electron acceptors through the reoxidation of reduced iron-sulfur species enhancing iron and sulfate reduction. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Applying NASA's explosive seam welding

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1991-01-01

The status of an explosive seam welding process, which was developed and evaluated for a wide range of metal joining opportunities, is summarized. The process employs very small quantities of explosive in a ribbon configuration to accelerate a long-length, narrow area of sheet stock into a high-velocity, angular impact against a second sheet. At impact, the oxide films of both surface are broken up and ejected by the closing angle to allow atoms to bond through the sharing of valence electrons. This cold-working process produces joints having parent metal properties, allowing a variety of joints to be fabricated that achieve full strength of the metals employed. Successful joining was accomplished in all aluminum alloys, a wide variety of iron and steel alloys, copper, brass, titanium, tantalum, zirconium, niobium, telerium, and columbium. Safety issues were addressed and are as manageable as many currently accepted joining processes.

48 CFR 15.101-2 - Lowest price technically acceptable source selection process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Lowest price technically acceptable source selection process. 15.101-2 Section 15.101-2 Federal Acquisition Regulations System FEDERAL... Processes and Techniques 15.101-2 Lowest price technically acceptable source selection process. (a) The...

Nitrate-Dependent O2 Evolution in Intact Leaves 1

PubMed Central

de la Torre, Angel; Delgado, Begoña; Lara, Catalina

1991-01-01

Evolution of O2 by illuminated intact detached leaves from barley (Hordeum vulgare L. cv Athos) and pea (Pisum sativum L. cv Lincoln) in a CO2-saturating atmosphere was enhanced when KNO3 (1-2.5 millimolar) had been previously supplied through the transpiration stream. The extra O2 evolution observed after feeding KNO3 increased with the light intensity, being maximal at near saturating photon flux densities and resulting in no changes in the initial slope of the O2 versus light-intensity curve. No stimulation of O2 evolution was otherwise observed after feeding KCl or NH4Cl. The data indicate that nitrate assimilation uses photosynthetically generated reductant and stimulates the rate of non-cyclic electron flow by acting as a second electron-accepting assimilatory process in addition to CO2 fixation. PMID:16668272

High-yield positron systems for linear colliders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clendenin, J.E.

1989-04-01

Linear colliders, such as the SLC, are among those accelerators for which a high-yield positron source operating at the repetition rate of the accelerator is desired. The SLC, having electron energies up to 50 GeV, presents the possibility of generating positron bunches with useful charge even exceeding that of the initial electron bunch. The exact positron yield to be obtained depends on the particular capture, transport and damping system employed. Using 31 GeV electrons impinging on a W-type converter phase-space at the target to the acceptance of the capture rf section, the SLC source is capable of producing, for everymore » electron, up to two positrons within the acceptance of the positron damping ring. The design of this source and the performance of the positron system as built are described. Also, future prospects and limitations for high-yield positron systems are discussed. 11 refs., 5 figs., 3 tabs.« less

OpenPET: A Flexible Electronics System for Radiotracer Imaging

NASA Astrophysics Data System (ADS)

Moses, W. W.; Buckley, S.; Vu, C.; Peng, Q.; Pavlov, N.; Choong, W.-S.; Wu, J.; Jackson, C.

2010-10-01

We present the design for OpenPET, an electronics readout system designed for prototype radiotracer imaging instruments. The critical requirements are that it has sufficient performance, channel count, channel density, and power consumption to service a complete camera, and yet be simple, flexible, and customizable enough to be used with almost any detector or camera design. An important feature of this system is that each analog input is processed independently. Each input can be configured to accept signals of either polarity as well as either differential or ground referenced signals. Each signal is digitized by a continuously sampled ADC, which is processed by an FPGA to extract pulse height information. A leading edge discriminator creates a timing edge that is “time stamped” by a TDC implemented inside the FPGA. This digital information from each channel is sent to an FPGA that services 16 analog channels, and information from multiple channels is processed by this FPGA to perform logic for crystal lookup, DOI calculation, calibration, etc. As all of this processing is controlled by firmware and software, it can be modified/customized easily. The system is open source, meaning that all technical data (specifications, schematics and board layout files, source code, and instructions) will be publicly available.

76 FR 61937 - Practice and Procedure: Rules of General Application, Safeguards, Antidumping and Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... System Web site at https://edis.usitc.gov . Failure to comply with the requirements of this chapter and... Electronic Document Information System (EDIS) already accepts electronic filing of certain documents, and..., regardless of whether the electronic docketing system is operational. The ITC TLA makes a similar comment...

Sample acceptance time criteria, electronic issue and alloimmunisation in thalassaemia.

PubMed

Trompeter, S; Baxter, L; McBrearty, M; Zatkya, E; Porter, J

2015-12-01

To determine the safety of a 1-week acceptance criteria of sample receipt in laboratory to transfusion commencement in transfusion dependent thalassaemia with respect to alloimmunisation. To determine the safety of electronic issue of blood components in such a setting. Retrospective audit of alloimmunisation (1999-2012) and blood exposure in registered thalassaemia patients at a central London thalassaemia centre where the acceptance criteria for the group and save sample from arrival in the laboratory to the time of issue of blood for transfusion for someone who has been transfused in the last 28 days was 1 week, and there was electronic issue protocol for patients who have always had a negative antibody screen (other than temporary positivity in pregnant women receiving prophylactic anti-D or anti Le-a, Anti Le-b and Anti P1 that are no longer detectable). There were 133 patients with thalassemia variants regularly attending UCLH for review. A total of 105 patients had transfusion dependent thalassaemia (TDT) (7 E-beta thalassaemia, 98 beta thalassaemia major). Ten of the 84 patients who received their transfusions at UCLH were alloimmunised. Seven of them had been alloimmunised prior to arrival at UCLH. Only two patients developed antibodies at UCLH during this period. The prevalence of alloantibody formation of 2% in UCLH transfused patients, with presumptive incidence of 0.01 alloantibodies per 100 units or 0·001 immunisations per person per year compares favourably with other reported series and suggests that 1 week interval with appropriate electronic issue is acceptable practice. © 2015 British Blood Transfusion Society.

Validation of electronic systems to collect patient-reported outcome (PRO) data-recommendations for clinical trial teams: report of the ISPOR ePRO systems validation good research practices task force.

PubMed

Zbrozek, Arthur; Hebert, Joy; Gogates, Gregory; Thorell, Rod; Dell, Christopher; Molsen, Elizabeth; Craig, Gretchen; Grice, Kenneth; Kern, Scottie; Hines, Sheldon

2013-06-01

Outcomes research literature has many examples of high-quality, reliable patient-reported outcome (PRO) data entered directly by electronic means, ePRO, compared to data entered from original results on paper. Clinical trial managers are increasingly using ePRO data collection for PRO-based end points. Regulatory review dictates the rules to follow with ePRO data collection for medical label claims. A critical component for regulatory compliance is evidence of the validation of these electronic data collection systems. Validation of electronic systems is a process versus a focused activity that finishes at a single point in time. Eight steps need to be described and undertaken to qualify the validation of the data collection software in its target environment: requirements definition, design, coding, testing, tracing, user acceptance testing, installation and configuration, and decommissioning. These elements are consistent with recent regulatory guidance for systems validation. This report was written to explain how the validation process works for sponsors, trial teams, and other users of electronic data collection devices responsible for verifying the quality of the data entered into relational databases from such devices. It is a guide on the requirements and documentation needed from a data collection systems provider to demonstrate systems validation. It is a practical source of information for study teams to ensure that ePRO providers are using system validation and implementation processes that will ensure the systems and services: operate reliably when in practical use; produce accurate and complete data and data files; support management control and comply with any existing regulations. Furthermore, this short report will increase user understanding of the requirements for a technology review leading to more informed and balanced recommendations or decisions on electronic data collection methods. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

A change of course: The importance to DoD of international standards for electronic commerce

NASA Astrophysics Data System (ADS)

Payne, Judith E.

1991-12-01

The U.S. Department of Defense (DoD) is committed to using electronic commerce in the future with the over 300,000 vendors interested in doing business with DoD. Electronic commerce will move DoD from a paper-based world to one based on electronic transactions enabled by the exchange of formatted, electronic messages referred to as electronic data interchange (EDI). With electronic commerce, DoD plans to reduce costs, increase effectiveness, and make it easier for vendors to deal with DoD. Benefits from electronic commerce are enhanced when many businesses use the same standards for EDI messages themselves and their transmission. The fewer standards used, the less time and resources must be spent translating messages and agreeing on how to use different standards. To enhance benefits and smooth the transition to electronic commerce for itself and its vendors, DoD has chosen to use the widely accepted American National Standards Institute (ANSI) X12 standards for EDI messages, coupled with international standards for delivering messages and organizing addresses. In the past 18 months, EDI standards sponsored by a United Nations body and serving the same purpose as ANSI X12 message standards have begun to gain wider acceptance internationally.

Inverted organic electronic and optoelectronic devices

NASA Astrophysics Data System (ADS)

Small, Cephas E.

The research and development of organic electronics for commercial application has received much attention due to the unique properties of organic semiconductors and the potential for low-cost high-throughput manufacturing. For improved large-scale processing compatibility and enhanced device stability, an inverted geometry has been employed for devices such as organic light emitting diodes and organic photovoltaic cells. These improvements are attributed to the added flexibility to incorporate more air-stable materials into the inverted device geometry. However, early work on organic electronic devices with an inverted geometry typically showed reduced device performance compared to devices with a conventional structure. In the case of organic light emitting diodes, inverted devices typically show high operating voltages due to insufficient carrier injection. Here, a method for enhancing hole injection in inverted organic electronic devices is presented. By incorporating an electron accepting interlayer into the inverted device, a substantial enhancement in hole injection efficiency was observed as compared to conventional devices. Through a detailed carrier injection study, it is determined that the injection efficiency enhancements in the inverted devices are due to enhanced charge transfer at the electron acceptor/organic semiconductor interface. A similar situation is observed for organic photovoltaic cells, in which devices with an inverted geometry show limited carrier extraction in early studies. In this work, enhanced carrier extraction is demonstrated for inverted polymer solar cells using a surface-modified ZnO-polymer composite electron-transporting layer. The insulating polymer in the composite layer inhibited aggregation of the ZnO nanoparticles, while the surface-modification of the composite interlayer improved the electronic coupling with the photoactive layer. As a result, inverted polymer solar cells with power conversion efficiencies of over 8% were obtained. To further study carrier extraction in inverted polymer solar cells, the active layer thickness dependence of the efficiency was investigated. For devices with active layer thickness < 200 nm, power conversion efficiencies over 8% was obtained. This result is important for demonstrating improved large-scale processing compatibility. Above 200 nm, significant reduction in cell efficiency were observed. A detailed study of the loss processes that contributed to the reduction in efficiency for thick-film devices are presented.

Personalised electronic messages to improve sun protection in young adults.

PubMed

Mair, Sarah; Soyer, H Peter; Youl, Philippa; Hurst, Cameron; Marshall, Alison; Janda, Monika

2012-07-01

We studied the acceptability and feasibility of delivering sun protection messages via electronic media such as short message services (SMS) to people aged 18-40 years. An online survey was conducted using a pre-established panel of volunteers. We compared the characteristics of those who indicated that they would like to be alerted to the UV index, with those who would not, using bivariate logistic regression. Characteristics found to be associated with a desire to receive such advice were entered into a multivariate logistic regression analysis. The median age of the 141 participants was 34 years. Overall, 80% of participants agreed that they would like to receive some form of sun protection advice. Of these, 20% preferred to receive it via SMS and 42% via email. Willingness to receive electronic messages about the UV index was associated with being unsure about whether a suntanned person would look healthy and greater use of sun protection in the past. Careful attention to message framing and timing of message delivery, and focus on the short-term effects of sun exposure such as sunburn and skin ageing should increase the acceptability of such messages to young people. Sun protection messages delivered to young adults via electronic media appear to be feasible and acceptable.

[Aspects of data protection in telemedicine].

PubMed

Vetter, R

2001-10-01

Telemedical applications like the electronic patient file, the electronic physician's letter and the electronic consultation ("Telekonsil"), the electronic prescription, the electronic patient's card (the "patient smart card") facilitate and improve the processing of sensitive medical data as well as the possibilities for using medical resources in an unusual degree and can thereby substantially contribute to the well-being of the patient. However, improving the quality of medical supply must not lead to a degradation of the patients' rights, in particular their right of self-determination. The introduction and the use of telemedical applications do not change the legal basic conditions for medical data processing. Therefore, a patient-friendly telemedicine must include data protection as well. Data protective telemedicine requires medical secrecy ensuring the patients' rights of information and transparency, correction of false and the up-to-date deletion of information that is no longer necessary, as well as secure data processing. All electronic processing of patients' data must meet the requirements of data security, i.e. the confidentiality, the integrity, the availability of the data at any time and the verifiability of the data processing have to be guaranteed. For this, electronic signatures and encodings have to be used, medical information systems have to be protected effectively against any risks resulting from open networks, particularly the Internet, and data processing has to be monitored. Electronic patient files may be open only to the treating physician and the medical assistants up to the necessary extent, ensuring the possibility of an emergency access. Any access beyond that does require the special consent of the patient. The medical secrecy has to be ensured. The electronic prescription with a documentation of the patient's medication requires the consent of the patient and must protect the rights of the physicians. In particular it has to ensure that the respective physician's prescribing behaviour cannot be stored or become known from a third party. Furthermore it has to protect the pharmacists' right to hide their turnover from other pharmacies. So-called patient smart cards require the consent of the patient. The right of the patient to keep his information secret, must be ensured with access options to the information stored on the smart card. Electronic physician's letters and socalled Telekonsile, i.e. the consultation with professional colleagues who were not involved in the patient's treatment from the beginning, require basically the agreement of the patient--if there cannot be dealt with anonymized data already from the beginning. In emergencies, after adequate consideration and weighing of values and interests, the consent of the patient can be suspected. The adherence to these boundary conditions ensures security and trustworthiness of telemedicine regarding the security of data processing as well as the rights of self-determination of all who are concerned. Data protection is also a contribution for the acceptance of these revolutionary advancements in the medical world.

Formation and morphology of Zn(2)Ti(3)O(8) powders using hydrothermal process without dispersant agent or mineralizer.

PubMed

Wang, Cheng-Li; Hwang, Weng-Sing; Chang, Kuo-Ming; Ko, Horng-Huey; Hsi, Chi-Shiung; Huang, Hong-Hsin; Wang, Moo-Chin

2011-01-28

Synthesis of Zn(2)Ti(3)O(8) powders for attenuating UVA using TiCl(4), Zn(NO(3))(2)·6H(2)O and NH(4)OH as precursor materials by hydrothermal process has been investigated. The X-ray diffractometry (XRD) results show the phases of ZnO, anatase TiO(2) and Zn(2)Ti(3)O(8) coexisted when the zinc titanate powders were calcined at 600 °C for 1 h. When calcined at 900 °C for 1 h, the XRD results reveal the existence of ZnO, Zn(2)TiO(4), rutile TiO(2) and ZnTiO(3). Scanning electron microscope (SEM) observations show extensive large agglomeration in the samples. Transmission electron microscope (TEM) and electron diffraction (ED) examination results indicate that ZnTiO(3) crystallites formed with a size of about 5 nm on the matrix of plate-like ZnO when calcined at 700 °C for 1 h. The calcination samples have acceptable absorbance at a wavelength of 400 nm, indicating that the zinc titanate precursor powders calcined at 700 °C for 1 h can be used as an UVA-attenuating agent.

Formation and Morphology of Zn2Ti3O8 Powders Using Hydrothermal Process without Dispersant Agent or Mineralizer

PubMed Central

Wang, Cheng-Li; Hwang, Weng-Sing; Chang, Kuo-Ming; Ko, Horng-Huey; Hsi, Chi-Shiung; Huang, Hong-Hsin; Wang, Moo-Chin

2011-01-01

Synthesis of Zn2Ti3O8 powders for attenuating UVA using TiCl4, Zn(NO3)2·6H2O and NH4OH as precursor materials by hydrothermal process has been investigated. The X-ray diffractometry (XRD) results show the phases of ZnO, anatase TiO2 and Zn2Ti3O8 coexisted when the zinc titanate powders were calcined at 600 °C for 1 h. When calcined at 900 °C for 1 h, the XRD results reveal the existence of ZnO, Zn2TiO4, rutile TiO2 and ZnTiO3. Scanning electron microscope (SEM) observations show extensive large agglomeration in the samples. Transmission electron microscope (TEM) and electron diffraction (ED) examination results indicate that ZnTiO3 crystallites formed with a size of about 5 nm on the matrix of plate-like ZnO when calcined at 700 °C for 1 h. The calcination samples have acceptable absorbance at a wavelength of 400 nm, indicating that the zinc titanate precursor powders calcined at 700 °C for 1 h can be used as an UVA-attenuating agent. PMID:21541035

Theoretical characterization on the size-dependent electron and hole trapping activity of chloride-passivated CdSe nanoclusters

NASA Astrophysics Data System (ADS)

Cui, Yingqi; Cui, Xianhui; Zhang, Li; Xie, Yujuan; Yang, Mingli

2018-04-01

Ligand passivation is often used to suppress the surface trap states of semiconductor quantum dots (QDs) for their continuous photoluminescence output. The suppression process is related to the electrophilic/nucleophilic activity of surface atoms that varies with the structure and size of QD and the electron donating/accepting nature of ligand. Based on first-principles-based descriptors and cluster models, the electrophilic/nucleophilic activities of bare and chloride-coated CdSe clusters were studied to reveal the suppression mechanism of Cl-passivated QDs and compared to experimental observations. The surface atoms of bare clusters have higher activity than inner atoms and their activity decreases with cluster size. In the ligand-coated clusters, the Cd atom remains as the electrophilic site, while the nucleophilic site of Se atoms is replaced by Cl atoms. The activities of Cd and Cl atoms in the coated clusters are, however, remarkably weaker than those in bare clusters. Cluster size, dangling atoms, ligand coverage, electronegativity of ligand atoms, and solvent (water) were found to have considerable influence on the activity of surface atoms. The suppression of surface trap states in Cl-passivated QDs was attributed to the reduction of electrophilic/nucleophilic activity of Cd/Se/Cl atoms. Both saturation to under-coordinated surface atoms and proper selection for the electron donating/accepting strength of ligands are crucial for eliminating the charge carrier traps. Our calculations predicted a similar suppressing effect of chloride ligands with experiments and provided a simple but effective approach to assess the charge carrier trapping behaviors of semiconductor QDs.

Copolymer semiconductors comprising thiazolothiazole or benzobisthiazole, or benzobisoxazole electron acceptor subunits, and electron donor subunits, and their uses in transistors and solar cells

DOEpatents

Jenekhe, Samson A; Subramaniyan, Selvam; Ahmed, Eilaf; Xin, Hao; Kim, Felix Sunjoo

2014-10-28

The inventions disclosed, described, and/or claimed herein relate to copolymers comprising copolymers comprising electron accepting A subunits that comprise thiazolothiazole, benzobisthiazole, or benzobisoxazoles rings, and electron donating subunits that comprise certain heterocyclic groups. The copolymers are useful for manufacturing organic electronic devices, including transistors and solar cells. The invention also relates to certain synthetic precursors of the copolymers. Methods for making the copolymers and the derivative electronic devices are also described.

SEM evaluation of metallization on semiconductors. [Scanning Electron Microscope

NASA Technical Reports Server (NTRS)

Fresh, D. L.; Adolphsen, J. W.

1974-01-01

A test method for the evaluation of metallization on semiconductors is presented and discussed. The method has been prepared in MIL-STD format for submittal as a proposed addition to MIL-STD-883. It is applicable to discrete devices and to integrated circuits and specifically addresses batch-process oriented defects. Quantitative accept/reject criteria are given for contact windows, other oxide steps, and general interconnecting metallization. Figures are provided that illustrate typical types of defects. Apparatus specifications, sampling plans, and specimen preparation and examination requirements are described. Procedures for glassivated devices and for multi-metal interconnection systems are included.

Manganese inhibition of microbial iron reduction in anaerobic sediments

USGS Publications Warehouse

Lovley, D.R.; Phillips, E.J.P.

1988-01-01

Potential mechanisms for the lack of Fe(II) accumulation in Mn(IV)-containing anaerobic sediments were investigated. The addition of Mn(IV) to sediments in which Fe(II) reduction was the terminal electron-accepting process removed all the pore-water Fe(II), completely inhibited net Fe(III) reduction, and stimulated Mn(IV) reduction. Results demonstrate that preferential reduction of Mn(IV) by FE(III)-reducing bacteria cannot completely explain the lack of Fe(II) accumulation in anaerobic, Mn(IV)-containing sediments, and indicate that Mn(IV) oxidation of Fe(II) is the mechanism that ultimately prevents Fe(II) accumulation. -Authors

Barriers to accepting e-prescribing in the U.S.A.

PubMed

Smith, Alan D

2006-01-01

With the number of prescriptions rising nationally each year, it is surprising that Web-based technology is not fully embraced in the pharmacy industry as an aid to quality-assuring prescribing processes. Traditional prescription handling is done in a manual fashion with physicians hand-writing prescriptions for the patients during an office visit, giving the patient the responsibility of taking the prescription to a pharmacy or mailing the prescription to a mail order company for fulfillment. Electronic prescribing (e-prescribing) has the ability not only to streamline the prescription writing process, but also to reduce the number of errors that may be incurred with hand-written prescriptions. The purpose of this paper is to investigate these phenomena in the U.S.A. A number of hypotheses were tested using principal-components analysis (PCA) and factor analyses. As a result, a total of 55 fully employed, professional and semi-professional service management and internet users, representing a college-educated and knowledge-based sample derived from the metropolitan section of Pittsburgh, was selected. The six major constructs generated from the factor loadings in descending order of importance were: profit and risk factors, shipping and handling, saving, customer relationship management (CRM) and ethics, age, and awareness. The dependent variable chosen to be regressed against these major independent factor-based constructs was willingness to purchase prescriptions online. The overall relationship was found to be statistically significant (F = 2.971, p = 0.015) in predicting willingness to use e-prescribing options based on the various independent constructs. However, when testing the various standardized beta coefficients in the linear model, only the factor score-based construct CRM and ethics was found to significantly contribute to predicting the willingness to purchase prescriptions online (t = -3.074, p = 0.003). Although this study appears to represent the e-prescribing process in the U.S.A., the sample size and region studied are only one slice of the general population. Practical implications - Unfortunately, the adoption of e-prescribing has been difficult to attain owing to numerous barriers throughout the industry. Such acceptance barriers include lack of technology trust, associated system costs, and risk of un-securing patient health and medical information. This article documents that increasing numbers of pharmacies today are building their IT-infrastructures to accept electronic prescriptions and it may soon be the preferred method for physicians to write prescriptions. It is with great anticipation that this technology will also enhance the prescription-writing abilities of prescribing physicians globally, giving them electronic access to patient medical records and resources that will assist them in prescribing the correct drug for the patient.

Public Acceptability in the UK and USA of Nudging to Reduce Obesity: The Example of Reducing Sugar-Sweetened Beverages Consumption

PubMed Central

Petrescu, Dragos C.; Hollands, Gareth J.; Couturier, Dominique-Laurent; Ng, Yin-Lam; Marteau, Theresa M.

2016-01-01

Background “Nudging”—modifying environments to change people’s behavior, often without their conscious awareness—can improve health, but public acceptability of nudging is largely unknown. Methods We compared acceptability, in the United Kingdom (UK) and the United States of America (USA), of government interventions to reduce consumption of sugar-sweetened beverages. Three nudge interventions were assessed: i. reducing portion Size, ii. changing the Shape of the drink containers, iii. changing their shelf Location; alongside two traditional interventions: iv. Taxation and v. Education. We also tested the hypothesis that describing interventions as working through non-conscious processes decreases their acceptability. Predictors of acceptability, including perceived intervention effectiveness, were also assessed. Participants (n = 1093 UK and n = 1082 USA) received a description of each of the five interventions which varied, by randomisation, in how the interventions were said to affect behaviour: (a) via conscious processes; (b) via non-conscious processes; or (c) no process stated. Acceptability was derived from responses to three items. Results Levels of acceptability for four of the five interventions did not differ significantly between the UK and US samples; reducing portion size was less accepted by the US sample. Within each country, Education was rated as most acceptable and Taxation the least, with the three nudge-type interventions rated between these. There was no evidence to support the study hypothesis: i.e. stating that interventions worked via non-conscious processes did not decrease their acceptability in either the UK or US samples. Perceived effectiveness was the strongest predictor of acceptability for all interventions across the two samples. Conclusion In conclusion, nudge interventions to reduce consumption of sugar-sweetened beverages seem similarly acceptable in the UK and USA, being more acceptable than taxation, but less acceptable than education. Contrary to prediction, we found no evidence that highlighting the non-conscious processes by which nudge interventions may work decreases their acceptability. However, highlighting the effectiveness of all interventions has the potential to increase their acceptability. PMID:27276222

Acceptance of genetically modified foods: the relation between technology and evaluation.

PubMed

Tenbült, Petra; De Vries, Nanne K; van Breukelen, Gerard; Dreezens, Ellen; Martijn, Carolien

2008-07-01

This study investigates why consumers accept different genetically modified food products to different extents. The study shows that whether food products are genetically modified or not and whether they are processed or not are the two important features that affect the acceptance of food products and their evaluation (in terms of perceived healthiness, naturalness, necessity and tastiness). The extent to which these evaluation attributes and acceptance of a product are affected by genetic modification or processing depends on whether the product is negatively affected by the other technology: Any technological change to a 'natural' product (when nonprocessed products are genetically modified or when non-genetically modified products are processed) affect evaluation and acceptance stronger than a change to an technologically adapted product (when processed products are also genetically modified or vice versa). Furthermore, evaluation attributes appear to mediate the effects of genetic modification and processing on acceptance.

Plan of production of MeV laser electron photons at SPring-8

NASA Astrophysics Data System (ADS)

Arimoto, Y.; Ohkuma, H.; Suzuki, S.; Tamura, K.; Kumagai, N.; Okajima, S.; Fujiwara, M.

2001-10-01

MeV photons at SPring-8 are produced by backward Compton scattering (BCS) of far infrared (FIR) laser photons from a 8 GeV electron beam. The MeV photons are a powerful probe to study nuclear physics, astro-nuclear physics, nuclear engineering, condensed matter physics, etc. owing to their attractive properties such as small emittance, high intensity, high polarization, etc. The 10 MeV photons which can be produced by the BCS process between the 8 GeV electron of SPring-8 storage ring and FIR laser photons with a wavelength of ~100 μm have a great advantage. Since energy loss of the electron due to the BCS process is smaller than energy acceptance of the storage ring (±160 MeV), the stored electron beam is not lost. A stable CO_2-pumped FIR laser with the wavelength of ~100 μm is practically using as a probe of plasma diagnostics at a nuclear fusion reactor. Furthermore, since the laser has many oscillations in wide wavelength region, the BCS photons in wide range can be obtained. We plan to produce the MeV laser electron photons by the BCS at SPring-8. For these purpose, we are now developing a high power CO_2-pumped FIR laser. Up to now ~1.5 watts CW laser action at a wavelength of 118.8 μm has been achieved. In this meeting, we will present a current status of the FIR laser system, a plan of construction of the test beam-line for the production of MeV photons at SPring-8, and future plan of this project.

Experiences with integral microelectronics on smart structures for space

NASA Astrophysics Data System (ADS)

Nye, Ted; Casteel, Scott; Navarro, Sergio A.; Kraml, Bob

1995-05-01

One feature of a smart structure implies that some computational and signal processing capability can be performed at a local level, perhaps integral to the controlled structure. This requires electronics with a minimal mechanical influence regarding structural stiffening, heat dissipation, weight, and electrical interface connectivity. The Advanced Controls Technology Experiment II (ACTEX II) space-flight experiments implemented such a local control electronics scheme by utilizing composite smart members with integral processing electronics. These microelectronics, tested to MIL-STD-883B levels, were fabricated with conventional thick film on ceramic multichip module techniques. Kovar housings and aluminum-kapton multilayer insulation was used to protect against harsh space radiation and thermal environments. Development and acceptance testing showed the electronics design was extremely robust, operating in vacuum and at temperature range with minimal gain variations occurring just above room temperatures. Four electronics modules, used for the flight hardware configuration, were connected by a RS-485 2 Mbit per second serial data bus. The data bus was controlled by Actel field programmable gate arrays arranged in a single master, four slave configuration. An Intel 80C196KD microprocessor was chosen as the digital compensator in each controller. It was used to apply a series of selectable biquad filters, implemented via Delta Transforms. Instability in any compensator was expected to appear as large amplitude oscillations in the deployed structure. Thus, over-vibration detection circuitry with automatic output isolation was incorporated into the design. This was not used however, since during experiment integration and test, intentionally induced compensator instabilities resulted in benign mechanical oscillation symptoms. Not too surprisingly, it was determined that instabilities were most detectable by large temperature increases in the electronics, typically noticeable within minutes of unstable operation.

Magnetite production and transformation in the methanogenic consortia from coastal riverine sediments.

PubMed

Zheng, Shiling; Wang, Bingchen; Liu, Fanghua; Wang, Oumei

2017-11-01

Minerals that contain ferric iron, such as amorphous Fe(III) oxides (A), can inhibit methanogenesis by competitively accepting electrons. In contrast, ferric iron reduced products, such as magnetite (M), can function as electrical conductors to stimulate methanogenesis, however, the processes and effects of magnetite production and transformation in the methanogenic consortia are not yet known. Here we compare the effects on methanogenesis of amorphous Fe (III) oxides (A) and magnetite (M) with ethanol as the electron donor. RNA-based terminal restriction fragment length polymorphism with a clone library was used to analyse both bacterial and archaeal communities. Iron (III)-reducing bacteria including Geobacteraceae and methanogens such as Methanosarcina were enriched in iron oxide-supplemented enrichment cultures for two generations with ethanol as the electron donor. The enrichment cultures with A and non-Fe (N) dominated by the active bacteria belong to Veillonellaceae, and archaea belong to Methanoregulaceae and Methanobacteriaceae, Methanosarcinaceae (Methanosarcina mazei), respectively. While the enrichment cultures with M, dominated by the archaea belong to Methanosarcinaceae (Methanosarcina barkeri). The results also showed that methanogenesis was accelerated in the transferred cultures with ethanol as the electron donor during magnetite production from A reduction. Powder X-ray diffraction analysis indicated that magnetite was generated from microbial reduction of A and M was transformed into siderite and vivianite with ethanol as the electron donor. Our data showed the processes and effects of magnetite production and transformation in the methanogenic consortia, suggesting that significantly different effects of iron minerals on microbial methanogenesis in the iron-rich coastal riverine environment were present.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hattawy, M.; Baltzell, N. A.; Dupré, R.

Here, we report on the first measurement of the beam-spin asymmetry in the exclusive process of coherent deeply virtual Compton scattering off a nucleus. The experiment used the 6 GeV electron beam from the CEBAF accelerator at Jefferson Lab incident on a pressurizedmore » $^4$He gaseous target placed in front of the CEBAF Large Acceptance Spectrometer (CLAS). The scattered electron was detected by CLAS and the photon by a dedicated electromagnetic calorimeter at forward angles. To ensure the exclusivity of the process, a specially designed radial time projection chamber was used to detect the recoiling $^4$He nuclei. We measured beam-spin asymmetries larger than those observed on the free proton in the same kinematic domain. From these, we were able to extract, in a model-independent way, the real and imaginary parts of the only $^4$He Compton form factor, $$\\cal H_A$$. This first measurement of coherent deeply virtual Compton scattering on the $^4$He nucleus, with a fully exclusive final state via nuclear recoil tagging, leads the way toward 3D imaging of the partonic structure of nuclei.« less

Dynamic Kinetic Resolution Enabled by Intramolecular Benzoin Reaction: Synthetic Applications and Mechanistic Insights.

PubMed

Zhang, Guoxiang; Yang, Shuang; Zhang, Xiaoyan; Lin, Qiqiao; Das, Deb K; Liu, Jian; Fang, Xinqiang

2016-06-29

The highly enantio-, diastereo-, and regioselective dynamic kinetic resolution of β-ketoesters and 1,3-diketones was achieved via a chiral N-heterocyclic carbene catalyzed intramolecular cross-benzoin reaction. A variety of tetralone derivatives bearing two contiguous stereocenters and multiple functionalities were liberated in moderate to excellent yields and with high levels of stereoselectivity (>95% ee and >20:1 dr in most cases). In addition, the excellent regioselectivity control for aryl/alkyl 1,3-diketones, and the superior electronic differentiation of 1,3-diarylketones were highlighted. Moreover, a set of new mechanistic rationale that differs with the currently widely accepted understanding of intramolecular benzoin reactions was established to demonstrate the superior preference of benzoin over aldol transformation: (1) A coexistence of competitive aldol and benzoin reactions was detected, but a retro-aldol-irreversible benzoin process performs a vital role in the generation of predominant benzoin products. (2) The most essential role of an N-electron-withdrawing substituent in triazolium catalysts was revealed to be accelerating the rate of the benzoin transformation, rather than suppressing the aldol process through reducing the inherent basicity of the catalyst.

Non-Equilibrium Phenomena in High Power Beam Materials Processing

NASA Astrophysics Data System (ADS)

Tosto, Sebastiano

2004-03-01

The paper concerns some aspects of non-equilibrium materials processing with high power beams. Three examples show that the formation of metastable phases plays a crucial role to understand the effects of beam-matter interaction: (i) modeling of pulsed laser induced thermal sputtering; (ii) formation of metastable phases during solidification of the melt pool; (i) possibility of carrying out heat treatments by low power irradiation ``in situ''. The case (i) deals with surface evaporation and boiling processes in presence of superheating. A computer simulation model of thermal sputtering by vapor bubble nucleation in molten phase shows that non-equilibrium processing enables the rise of large surface temperature gradients in the boiling layer and the possibility of sub-surface temperature maximum. The case (ii) concerns the heterogeneous welding of Cu and AISI 304L stainless steel plates by electron beam irradiation. Microstructural investigation of the molten zone has shown that dwell times of the order of 10-1-10-3 s, consistent with moderate cooling rates in the range 10^3-10^5 K/s, entail the formation of metastable Cu-Fe phases. The case (iii) concerns electron beam welding and post-welding treatments of 2219 Al base alloy. Electron microscopy and positron annihilation have explained why post-weld heat transients induced by low power irradiation of specimens in the as welded condition enable ageing effects usually expected after some hours of treatment in furnace. The problem of microstructural instability is particularly significant for a correct design of components manufactured with high power beam technologies and subjected to severe acceptance standards to ensure advanced performances during service life.

25 CFR 16.5 - Acceptance and acknowledgement of service of process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Acceptance and acknowledgement of service of process. 16... INDIANS OF THE FIVE CIVILIZED TRIBES § 16.5 Acceptance and acknowledgement of service of process. Service by the Field Solicitor or any other person of any process or notice, pursuant to any Federal statute...

A Search for the Standard Model Higgs Boson in CDF II Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lockwitz, Sarah E.

2012-01-01

This dissertation presents a search for the standard model Higgs boson in the associated production process pmore » $$\\bar{p}$$ → ZH → e +e -b$$\\bar{b}$$. Data amounting to an integrated luminosity of 7.5 fb -1 at √s = 1.96 TeV collected at the Collider Detector at Fermilab (CDF) at the Tevatron are analyzed. Two objectives are pursued in the methods applied: maximize acceptance, and distinguish the signal from background. The first aim is met by applying a neural-network-based electron identi cation and considering multiple electron triggers in an effort to improve Z acceptance. In an attempt to maximize the Higgs acceptance, three b quark identification schemes are used allowing for varying event conditions. The latter goal is met by employing more multivariate techniques. First, the dijet mass resolution is improved by a neural network. Then, both single variables and boosted decision tree outputs are fed into a segmented final discriminant simultaneously isolating the signal-like events from the Z with additional jets background and the kinematically di erent tt background. Good agreement is seen with the null hypothesis and upper production cross section ( ZH) times branching ratio (BR(H →b $$\\bar{b}$$)) limits are set for 11 mass hypotheses between 100 and 150 GeV/c 2 at the 95% confidence level. For a Higgs boson mass of 115 GeV/c 2, this channel sets an observed (expected) upper limit of 3.9 (5.8) times the standard model value of ZH BR(H → b $$\\bar{b}$$). The inclusion of this channel within the combined CDF and Tevatron limits is discussed.« less

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

PubMed

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

Optimizing information technology to improve sexual health-care delivery: public and patient preferences.

PubMed

Ross, J D C; Copas, A; Stephenson, J; Fellows, L; Gilleran, G

2007-07-01

Information and communication technology (ICT) has the potential to improve the quality of care and efficiency in sexual health clinics, but its introduction requires input not only from health-care professionals and ICT specialists but also from service users and potential future users. In this study, views on ICT in relation to the delivery of sexual health services were assessed using a structured interview in two groups - a community sample of young people and a clinic sample of existing patients. In all, 542 community interviewees and 202 clinic patients participated. About 75% of respondents had access to the Internet and overall 60% reported that the self-collection of a sexual history on an electronic form was acceptable. Black Caribbean individuals had significantly less access to the Internet and a lower acceptance of electronic data collection. For booking an appointment, the majority of patients reported the telephone (community sample 93%, clinic sample 96%) or attending in person (community sample 77%, clinic sample 54%) to be acceptable, with a smaller proportion choosing email (community sample 10%, clinic sample 27%) or the Internet (community sample 7%, clinic sample 11%). Electronic booking was significantly less acceptable to Black Caribbean respondents. Although new technologies offer the opportunity to improve the quality of sexual health services, patient preferences and differences between groups in access to technology also need to be considered when services are reconfigured.

The structure of PccH from Geobactersulfurreducens-a novel low reduction potential monoheme cytochrome essential for accepting electrons from an electrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dantas, Joana; Campelo, Luisa M.; Duke, Norma E. C.

The structure of cytochrome c (GSU3274) designated as PccH from Geobactersulfurreducens was determined at a resolution of 2.0 angstrom. PccH is a small (15kDa) cytochrome containing one c-type heme, found to be essential for the growth of G.sulfurreducens with respect to accepting electrons from graphite electrodes poised at -300mV versus standard hydrogen electrode. with fumarate as the terminal electron acceptor. The structure of PccH is unique among the monoheme cytochromes described to date. The structural fold of PccH can be described as forming two lobes with the heme sandwiched in a cleft between the two lobes. In addition, PccH hasmore » a low reduction potential of -24mV at pH7, which is unusual for monoheme cytochromes. Based on difference in structure, together with sequence phylogenetic analysis, we propose that PccH can be regarded as a first characterized example of a new subclass of class I monoheme cytochromes. The low reduction potential of PccH may enable the protein to be redox active at the typically negative potential ranges encountered by G. sulfurreducens. Because PccH is predicted to be located in the periplasm of this bacterium, it could not be involved in the first step of accepting electrons from the electrode but is very likely involved in the downstream electron transport events in the periplasm.« less

The structure of PccH from Geobacter sulfurreducens  - a novel low reduction potential monoheme cytochrome essential for accepting electrons from an electrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dantas, Joana M.; Campelo, Luísa M.; Duke, Norma E. C.

2015-04-10

The structure of cytochrome-c (GSU3274) designated as PccH from Geobacter sulfurreducens was determined at 2.0 Å resolution. PccH is a small (15 kDa) cytochrome containing one c-type heme, found to be essential for growth of G. sulfurreducens accepting electrons from graphite electrodes poised at -300 mV versus SHE with fumarate as the terminal electron acceptor. The structure of PccH is unique among the monoheme cytochromes described to date. The structural fold of PccH can be described as forming two lobes with the heme sandwiched in a cleft between the two lobes. In addition, PccH has a low reduction potential ofmore » -24 mV at pH 7, which is unusual for monoheme cytochromes. Based on difference in structure together with sequence phylogenetic analysis we propose that PccH can be regarded as a first characterized example of a new subclass of class I monoheme cytochromes. The low reduction potential of PccH may enable the protein to be redox active at the typically negative potential ranges encountered by this bacterium. Because PccH is predicted to be located in the periplasm of G. sulfurreducens, it could not be involved in the first step of accepting electrons from the electrode but very likely involved in the downstream electron transport events in the periplasm.« less

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach

PubMed Central

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Context: Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. Aims: This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Materials and Methods: Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts’ deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Statistical Analysis Used: Non-parametric tests and AHP approach using Expert Choice software. Results: The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution “controlling and improving the process in handling users complaints” is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Conclusions: Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to “services interaction.” As the results showed having “controlling and improving the process in handling users complaints” on the website is the first and most important one and the process of “changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula” is the least important one. PMID:25540790

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach.

PubMed

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts' deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Non-parametric tests and AHP approach using Expert Choice software. The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution "controlling and improving the process in handling users complaints" is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to "services interaction." As the results showed having "controlling and improving the process in handling users complaints" on the website is the first and most important one and the process of "changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula" is the least important one.

Do Open Access Electronic Theses and Dissertations Diminish Publishing Opportunities in the Sciences?

ERIC Educational Resources Information Center

Ramírez, Marisa L.; McMillan, Gail; Dalton, Joan T.; Hanlon, Ann; Smith, Heather S.; Kern, Chelsea

2014-01-01

In academia, there is a growing acceptance of sharing the final electronic version of graduate work, such as a thesis or dissertation, in an online university repository. Though previous studies have shown that journal editors are willing to consider manuscripts derived from electronic theses and dissertations (ETDs), faculty advisors and graduate…

78 FR 66675 - Endangered and Threatened Wildlife; 90-Day Finding on a Petition To List Multiple Species of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file formats only... this document, identified by the code NOAA-NMFS-2013-0150, by any of the following methods: Electronic Submissions: Submit all electronic comments via the Federal eRulemaking Portal. Go to www.regulations.gov...

5 CFR 838.302 - Language not acceptable for processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Language not acceptable for processing... Affecting Employee Annuities § 838.302 Language not acceptable for processing. (a) Qualifying Domestic... accordance with the terminology used in this part. (3) Although any language satisfying the requirements of...

5 CFR 838.302 - Language not acceptable for processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Language not acceptable for processing... Affecting Employee Annuities § 838.302 Language not acceptable for processing. (a) Qualifying Domestic... accordance with the terminology used in this part. (3) Although any language satisfying the requirements of...

Monitoring TCE Degradation by In-situ Bioremediation in TCE-Contaminated site

NASA Astrophysics Data System (ADS)

Han, K.; Hong, U.; Ahn, G.; Jiang, H.; Yoo, H.; Park, S.; Kim, N.; Ahn, H.; Kwon, S.; Kim, Y.

2012-12-01

Trichloroethylene (TCE) is a long-term common groundwater pollutant because the compound with high density is slowly released into groundwater. Physical and chemical remediation processes have been used to clean-up the contaminant, but novel remediation technology is required to overcome a low efficiency of the traditional treatment process. Many researchers focused on biological process using an anaerobic TCE degrading culture, but it still needs to evaluate whether the process can be applied into field scale under aerobic condition. Therefore, in this work we investigated two different tests (i.e., biostimulation and bioaugmentation) of biological remediation through the Well-to-Well test (injection well to extraction well) in TCE-contaminated site. Also solutions (Electron donor & acceptor, tracer) were injected into the aquifer using a liquid coupled with nitrogen gas sparging. In biostimulation, we use 3 phases to monitoring biological remediation. Phase 1: we inject formate solution to get electron donor hydrogen (hydrogen can be generated from fermentation of formate). We also inject bromide as tracer. Phase 2: we made injection solution by formate, bromide and sulfate. The reason why we inject sulfate is that as a kind of electron accepter, sulfate reduction process is helpful to create anaerobic condition. Phase 3: we inject mixed solution made by formate, sulfate, fumarate, and bromide. The degradation of fumarate has the same mechanism and condition with TCE degradation, so we added fumarate to make sure that if the anaerobic TCE degradation by indigenous microorganisms started up (Because low TCE concentration by gas sparging). In the bioaugmentation test, we inject the Evanite culture (containing dehalococcoides spp) and TCE degradation to c-DCE, VC, ETH was monitored. We are evaluating the transport of the Evanite culture in the field by measuring TCE and VC reductases.

Extensions of the Theory of the Electron-Phonon Interaction in Metals: A Collection.

DTIC Science & Technology

1983-11-03

accepted The measured zero -field susceptibility is given 50 . . . . 26 GENERALIZATION OF THE THEORY OF THE ELECTRON-... 1199 JP by X.P_ IM T V.IM 0... Generalization of the Theory of the Electron-Phonon Inter- action: Thermodynamic Formulation of Superconducting- and Normal-State Properties...A microscopic treatment of the consequences for supercon- ductivity of a nonconstant electronic density of states is presented. Generalized

40 CFR 35.6705 - Records retention.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... This requirement applies to all financial and programmatic records, supporting documents, statistical... ten-year period, whichever is later. (c) Substitution of an unalterable electronic format. An unalterable electronic format, acceptable to EPA, may be substituted for the original records. The copying of...

40 CFR 35.6705 - Records retention.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... This requirement applies to all financial and programmatic records, supporting documents, statistical... ten-year period, whichever is later. (c) Substitution of an unalterable electronic format. An unalterable electronic format, acceptable to EPA, may be substituted for the original records. The copying of...

40 CFR 35.6705 - Records retention.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... This requirement applies to all financial and programmatic records, supporting documents, statistical... ten-year period, whichever is later. (c) Substitution of an unalterable electronic format. An unalterable electronic format, acceptable to EPA, may be substituted for the original records. The copying of...

40 CFR 35.6705 - Records retention.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... This requirement applies to all financial and programmatic records, supporting documents, statistical... ten-year period, whichever is later. (c) Substitution of an unalterable electronic format. An unalterable electronic format, acceptable to EPA, may be substituted for the original records. The copying of...

40 CFR 35.6705 - Records retention.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... This requirement applies to all financial and programmatic records, supporting documents, statistical... ten-year period, whichever is later. (c) Substitution of an unalterable electronic format. An unalterable electronic format, acceptable to EPA, may be substituted for the original records. The copying of...

Electronic Nicotine Delivery Systems and Acceptability of Adult Cigarette Smoking Among Florida Youth: Renormalization of Smoking?

PubMed

Choi, Kelvin; Grana, Rachel; Bernat, Debra

2017-05-01

There is a dearth of research into whether electronic nicotine delivery systems (ENDS) promote acceptance of cigarette smoking. Therefore, we aimed to assess the association between ENDS exposure, acceptance of cigarette smoking, and susceptibility to cigarette smoking. Data from the 2014 Florida Youth Tobacco Survey with a state representative sample of middle and high school students (n = 68,928) were analyzed. Own ENDS use, exposure to ENDS advertising, living with ENDS users, acceptance of adult cigarette smoking, demographics, and known predictors of cigarette smoking were assessed. Susceptibility to cigarette smoking was assessed among never smokers. Weighted multiple logistic regression models and mediation analyses were conducted, stratified by middle/high school and never/ever smoking. Analyses were conducted in 2016. Own ENDS use, exposure to ENDS advertising, and living with ENDS users were associated with acceptance of adult cigarette smoking even among never smokers, after accounting for covariates (p < .05). In a mediation analysis, own ENDS use, exposure to ENDS advertising, and living with ENDS users were indirectly associated with susceptibility to cigarette smoking among never smokers through acceptance of adult cigarette smoking (p < .05). Youth ENDS exposure may contribute to normalizing adult cigarette smoking and may in turn heighten susceptibility to cigarette smoking. If confirmed by longitudinal studies, these findings suggest that ENDS policy interventions may help prevent youth cigarette smoking. Published by Elsevier Inc.

Increasing access to farmers markets for beneficiaries of nutrition assistance: evaluation of the farmers market access project.

PubMed

Cole, Kate; McNees, Molly; Kinney, Karen; Fisher, Kari; Krieger, James W

2013-10-03

Increased acceptance of nutrition benefits at farmers markets could improve access to nutritious foods for low-income shoppers. The objective of this study was to evaluate a pilot project to increase participation by farmers markets and their vendors in the Supplemental Nutrition Assistance Program (SNAP) and Special Supplemental Nutrition Program for Women, Infants, and Children (WIC). The intervention targeted 9 markets in lower-income regions of King County, Washington. Markets and vendors were offered subsidized electronic benefits transfer (EBT) terminals for processing SNAP, and vendors could apply to accept WIC cash value vouchers. WIC staff received information on using SNAP and vouchers at farmers markets. We used mixed methods post-implementation to measure participation, describe factors in acceptance of benefits, and assess information needs for WIC staff to conduct effective outreach. Of approximately 88 WIC-eligible vendors, 38 agreed to accept vouchers. Ten of 125 vendors installed an EBT terminal, and 6 markets installed a central market terminal. The number of market stalls accepting SNAP increased from 80 to 143, an increase of 79%. Participating vendors wanted to provide access to SNAP and WIC shoppers, although redemption rates were low. Some WIC staff members were unfamiliar with markets, which hindered outreach. Vendors and markets value low-income shoppers and, when offered support, will take on some inconvenience to serve them. To improve participation and sustainability, we recommend ongoing subsidies and streamlined procedures better suited to meet markets' capabilities. Low EBT redemption rates at farmers markets suggest a need for more outreach to low-income shoppers and relationship building with WIC staff.

5 CFR 838.803 - Language not acceptable for processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Language not acceptable for processing... Awarding Former Spouse Survivor Annuities § 838.803 Language not acceptable for processing. (a) Qualifying... drafted in accordance with the terminology used in this part. (3) Although any language satisfying the...

5 CFR 838.803 - Language not acceptable for processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Language not acceptable for processing... Awarding Former Spouse Survivor Annuities § 838.803 Language not acceptable for processing. (a) Qualifying... drafted in accordance with the terminology used in this part. (3) Although any language satisfying the...

Electron diffusion region and thermal demagnetization

NASA Astrophysics Data System (ADS)

Scudder, J. D.; Holdaway, R. D.; Glassberg, R.; Rodriguez, S. L.

2008-10-01

The demagnetized skin depth width electron diffusion region (EDR) distinguishes the innermost current layers of collisionless magnetic reconnection (CMR) from other current layers. Such narrow layers with virtually unknown properties are hard to identify in space observations. Soon, diagnosing it will be the central focus of NASA's Magnetospheric Multiscale Mission. Initial attempts have been made to frame necessary tests to ensure that the observer is in the EDR. Since none of the tests are sufficient to identify the EDR, it is important to vet as many necessary conditions as possible. In this way a winnowing process can lessen the likelihood of false positive detections of the EDR. Since the "necessary" criteria of the EDR are usually not amenable to direct experimental tests, a vetting process is desirable before accepting "necessary" proxy tests for the criteria of CMR. This paper proposes a further necessary test of an essential property of the EDR: the necessity that the thermal electrons be demagnetized in these regions. Without this attribute, the magnetic flux is essentially frozen to the electron fluid velocity and the topology breaking of CMR is thwarted. We have framed this test from kinetic theory, gathered the relevant observables, and used it with a published set of over 100 previously identified EDRs. Surprisingly, 99% of them are ≃100 times more magnetized than expected for the EDR of CMR theory. The outcome of this falsifiable test demonstrates the scientific dialogue is incomplete for framing adequate pragmatic tests for identifying EDRs.

New Fukui, dual and hyper-dual kernels as bond reactivity descriptors.

PubMed

Franco-Pérez, Marco; Polanco-Ramírez, Carlos-A; Ayers, Paul W; Gázquez, José L; Vela, Alberto

2017-06-21

We define three new linear response indices with promising applications for bond reactivity using the mathematical framework of τ-CRT (finite temperature chemical reactivity theory). The τ-Fukui kernel is defined as the ratio between the fluctuations of the average electron density at two different points in the space and the fluctuations in the average electron number and is designed to integrate to the finite-temperature definition of the electronic Fukui function. When this kernel is condensed, it can be interpreted as a site-reactivity descriptor of the boundary region between two atoms. The τ-dual kernel corresponds to the first order response of the Fukui kernel and is designed to integrate to the finite temperature definition of the dual descriptor; it indicates the ambiphilic reactivity of a specific bond and enriches the traditional dual descriptor by allowing one to distinguish between the electron-accepting and electron-donating processes. Finally, the τ-hyper dual kernel is defined as the second-order derivative of the Fukui kernel and is proposed as a measure of the strength of ambiphilic bonding interactions. Although these quantities have never been proposed, our results for the τ-Fukui kernel and for τ-dual kernel can be derived in zero-temperature formulation of the chemical reactivity theory with, among other things, the widely-used parabolic interpolation model.

How we give personalised audio feedback after summative OSCEs.

PubMed

Harrison, Christopher J; Molyneux, Adrian J; Blackwell, Sara; Wass, Valerie J

2015-04-01

Students often receive little feedback after summative objective structured clinical examinations (OSCEs) to enable them to improve their performance. Electronic audio feedback has shown promise in other educational areas. We investigated the feasibility of electronic audio feedback in OSCEs. An electronic OSCE system was designed, comprising (1) an application for iPads allowing examiners to mark in the key consultation skill domains, provide "tick-box" feedback identifying strengths and difficulties, and record voice feedback; (2) a feedback website giving students the opportunity to view/listen in multiple ways to the feedback. Acceptability of the audio feedback was investigated, using focus groups with students and questionnaires with both examiners and students. 87 (95%) students accessed the examiners' audio comments; 83 (90%) found the comments useful and 63 (68%) reported changing the way they perform a skill as a result of the audio feedback. They valued its highly personalised, relevant nature and found it much more useful than written feedback. Eighty-nine per cent of examiners gave audio feedback to all students on their stations. Although many found the method easy, lack of time was a factor. Electronic audio feedback provides timely, personalised feedback to students after a summative OSCE provided enough time is allocated to the process.

EDITORIAL: Trends in Nanotechnology

NASA Astrophysics Data System (ADS)

Correia, Antonio; Serena, Pedro A.; Saenz, Juan Jose; Welland, Mark; Reifenberger, Ron

2004-04-01

With effect from August 2004 the journal Nanotechnology will discontinue the `Letters to the Editor' section. The increase in publication speed achieved for all articles now means that letters have no advantage. Fully electronic publication processes including electronic submission, refereeing and proofing, ensure that all papers are processed with minimum delay and are published as soon as they are ready. The journal will continue to publish high-quality original research papers, reviews and tutorials, as well as papers on the ethical and societal implications of nanotechnology at the discretion of the Editorial Board. All submitted papers will undergo a pre-selection procedure for suitability by the Editors of the journal. If a paper is accepted for consideration by the journal it will be sent to independent experts in the field for peer review. To speed up the publication process, we encourage authors to suggest five independent experts in their field as potential referees and supply their title, name, affiliation and e-mail address. The Editors of the journal may use these names at their discretion. Authors may also request that certain people are not to be used as referees. Papers of special interest will be given the utmost priority and on acceptance will be publicized further through worldwide press releases and reviews on the Institute of Physics website and on nanotechweb.org. As a service to authors and to the international physics community, and as part of our commitment to give authors' work as much visibility as possible, all papers are freely available online for 30 days from their electronic publication date. This means open access for citations to everyone in the world. We will also send an electronic offprint of your published paper to ten colleagues of your choice, giving your article an increased chance of being cited quickly. In the meantime, we are pleased to announce an increase in the Impact Factor of the journal in 2003 to 2.304, which means that Nanotechnology is now ranked as one of the top 10 journals in the world in the Applied Physics category. We would like to take this opportunity to thank all our authors and referees for their contribution to the journal ensuring its growing quality and impact, and we welcome new papers in all areas of theory and experiment of nanoscale science and technology. For guidelines on how to submit your paper please visit the journal's home page www.iop.org/journals/nano.

21 CFR 820.80 - Receiving, in-process, and finished device acceptance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Receiving, in-process, and finished device acceptance. 820.80 Section 820.80 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... acceptance to ensure that each production run, lot, or batch of finished devices meets acceptance criteria...

21 CFR 820.80 - Receiving, in-process, and finished device acceptance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Receiving, in-process, and finished device acceptance. 820.80 Section 820.80 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... acceptance to ensure that each production run, lot, or batch of finished devices meets acceptance criteria...

Clinician Acceptance of Electronic Medical Records (EMRs): Relating Personality Factors to Continuance Intention

ERIC Educational Resources Information Center

McClellan, Molly Ann

2011-01-01

Many models currently exist for evaluating acceptance and continued use of technology. However, none of these models are healthcare specific, nor do they involve aspects of users' personality. Although the five-factor model (FFM) of personality has been effectively used in psychology and human resources and management research to predict…

Electronic Health in Perspective of Healthcare Managers: A Qualitative Study in South of Iran

PubMed Central

BASTANI, Peivand; ABOLHASANI, Nazanin; SHAARBAFCHIZADEH, Nasrin

2014-01-01

Abstract Background The important role of electronic health as well as importance of health care systems awareness and readiness may lead to develop the essential infrastructures for electronic health especially in developing countries. This study aims to investigate goals, gains, applications, challenges and other important issues related to success performance of electronic health. Method This research proposed a grounded theory in a qualitative design and a purposive sampling was used to select participants which consisted of 28 hospital managers and staff field managers working in deputy of health and curative affairs of Medical Science Universities in south of Iran. Semi structured interviews were conducted using a topic guide and intended themes derived from the results using Max QDA software during five steps. Results Nine themes through interviewees” viewpoints were made up as followed: Electronic health definition, necessity and importance of electronic health, electronic health advantages, relationship between electronic health and internet, physicians” opposition to electronic health, prerequisites for electronic health, solutions for applying electronic health plan, factors affecting electronic health acceptance in society and electronic health system challenges. Conclusion It seems that there are good circumstances in the south medical universities about settlement and implementations of electronic health and their managers are aware of its advantages, importance and necessities. The present findings implicate that these organizations should consider the user friendly and probable resistances of the present clients, in this regard it is suggested that the used technology must be accepted by users, having standard base, inexpensive and simple enough while less vulnerable in response to changes. PMID:26110152

Electronic Health in Perspective of Healthcare Managers: A Qualitative Study in South of Iran.

PubMed

Bastani, Peivand; Abolhasani, Nazanin; Shaarbafchizadeh, Nasrin

2014-06-01

The important role of electronic health as well as importance of health care systems awareness and readiness may lead to develop the essential infrastructures for electronic health especially in developing countries. This study aims to investigate goals, gains, applications, challenges and other important issues related to success performance of electronic health. This research proposed a grounded theory in a qualitative design and a purposive sampling was used to select participants which consisted of 28 hospital managers and staff field managers working in deputy of health and curative affairs of Medical Science Universities in south of Iran. Semi structured interviews were conducted using a topic guide and intended themes derived from the results using Max QDA software during five steps. Nine themes through interviewees" viewpoints were made up as followed: Electronic health definition, necessity and importance of electronic health, electronic health advantages, relationship between electronic health and internet, physicians" opposition to electronic health, prerequisites for electronic health, solutions for applying electronic health plan, factors affecting electronic health acceptance in society and electronic health system challenges. It seems that there are good circumstances in the south medical universities about settlement and implementations of electronic health and their managers are aware of its advantages, importance and necessities. The present findings implicate that these organizations should consider the user friendly and probable resistances of the present clients, in this regard it is suggested that the used technology must be accepted by users, having standard base, inexpensive and simple enough while less vulnerable in response to changes.

Simple structured hybrid WOLEDs based on incomplete energy transfer mechanism: from blue exciplex to orange dopant.

PubMed

Zhang, Tianyou; Zhao, Bo; Chu, Bei; Li, Wenlian; Su, Zisheng; Yan, Xingwu; Liu, Chengyuan; Wu, Hairuo; Gao, Yuan; Jin, Fangming; Hou, Fuhua

2015-05-15

Exciplex is well known as a charge transfer state formed between electron-donating and electron-accepting molecules. However, exciplex based organic light emitting diodes (OLED) often performed low efficiencies relative to pure phosphorescent OLED and could hardly be used to construct white OLED (WOLED). In this work, a new mechanism is developed to realize efficient WOLED with extremely simple structure by redistributing the energy of triplet exciplex to both singlet exciplex and the orange dopant. The micro process of energy transfer could be directly examined by detailed photoluminescence decay measurement and time resolved photoluminescence analysis. This strategy overcomes the low reverse intersystem crossing efficiency of blue exciplex and complicated device structure of traditional WOLED, enables us to achieve efficient hybrid WOLEDs. Based on this mechanism, we have successfully constructed both exciplex-fluorescence and exciplex-phosphorescence hybrid WOLEDs with remarkable efficiencies.

Simple structured hybrid WOLEDs based on incomplete energy transfer mechanism: from blue exciplex to orange dopant

NASA Astrophysics Data System (ADS)

Zhang, Tianyou; Zhao, Bo; Chu, Bei; Li, Wenlian; Su, Zisheng; Yan, Xingwu; Liu, Chengyuan; Wu, Hairuo; Gao, Yuan; Jin, Fangming; Hou, Fuhua

2015-05-01

Exciplex is well known as a charge transfer state formed between electron-donating and electron-accepting molecules. However, exciplex based organic light emitting diodes (OLED) often performed low efficiencies relative to pure phosphorescent OLED and could hardly be used to construct white OLED (WOLED). In this work, a new mechanism is developed to realize efficient WOLED with extremely simple structure by redistributing the energy of triplet exciplex to both singlet exciplex and the orange dopant. The micro process of energy transfer could be directly examined by detailed photoluminescence decay measurement and time resolved photoluminescence analysis. This strategy overcomes the low reverse intersystem crossing efficiency of blue exciplex and complicated device structure of traditional WOLED, enables us to achieve efficient hybrid WOLEDs. Based on this mechanism, we have successfully constructed both exciplex-fluorescence and exciplex-phosphorescence hybrid WOLEDs with remarkable efficiencies.

Simple structured hybrid WOLEDs based on incomplete energy transfer mechanism: from blue exciplex to orange dopant

PubMed Central

Zhang, Tianyou; Zhao, Bo; Chu, Bei; Li, Wenlian; Su, Zisheng; Yan, Xingwu; Liu, Chengyuan; Wu, Hairuo; Gao, Yuan; Jin, Fangming; Hou, Fuhua

2015-01-01

Exciplex is well known as a charge transfer state formed between electron-donating and electron-accepting molecules. However, exciplex based organic light emitting diodes (OLED) often performed low efficiencies relative to pure phosphorescent OLED and could hardly be used to construct white OLED (WOLED). In this work, a new mechanism is developed to realize efficient WOLED with extremely simple structure by redistributing the energy of triplet exciplex to both singlet exciplex and the orange dopant. The micro process of energy transfer could be directly examined by detailed photoluminescence decay measurement and time resolved photoluminescence analysis. This strategy overcomes the low reverse intersystem crossing efficiency of blue exciplex and complicated device structure of traditional WOLED, enables us to achieve efficient hybrid WOLEDs. Based on this mechanism, we have successfully constructed both exciplex-fluorescence and exciplex-phosphorescence hybrid WOLEDs with remarkable efficiencies. PMID:25975371

Archaea in Organic-Lean and Organic-Rich Marine Subsurface Sediments: An Environmental Gradient Reflected in Distinct Phylogenetic Lineages

PubMed Central

Durbin, Alan M.; Teske, Andreas

2012-01-01

Examining the patterns of archaeal diversity in little-explored organic-lean marine subsurface sediments presents an opportunity to study the association of phylogenetic affiliation and habitat preference in uncultured marine Archaea. Here we have compiled and re-analyzed published archaeal 16S rRNA clone library datasets across a spectrum of sediment trophic states characterized by a wide range of terminal electron-accepting processes. Our results show that organic-lean marine sediments in deep marine basins and oligotrophic open ocean locations are inhabited by distinct lineages of archaea that are not found in the more frequently studied, organic-rich continental margin sediments. We hypothesize that different combinations of electron donor and acceptor concentrations along the organic-rich/organic-lean spectrum result in distinct archaeal communities, and propose an integrated classification of habitat characteristics and archaeal community structure. PMID:22666218

Low-cost fabrication technologies for nanostructures: state-of-the-art and potential

NASA Astrophysics Data System (ADS)

Santos, A.; Deen, M. J.; Marsal, L. F.

2015-01-01

In the last decade, some low-cost nanofabrication technologies used in several disciplines of nanotechnology have demonstrated promising results in terms of versatility and scalability for producing innovative nanostructures. While conventional nanofabrication technologies such as photolithography are and will be an important part of nanofabrication, some low-cost nanofabrication technologies have demonstrated outstanding capabilities for large-scale production, providing high throughputs with acceptable resolution and broad versatility. Some of these nanotechnological approaches are reviewed in this article, providing information about the fundamentals, limitations and potential future developments towards nanofabrication processes capable of producing a broad range of nanostructures. Furthermore, in many cases, these low-cost nanofabrication approaches can be combined with traditional nanofabrication technologies. This combination is considered a promising way of generating innovative nanostructures suitable for a broad range of applications such as in opto-electronics, nano-electronics, photonics, sensing, biotechnology or medicine.

Proline-Dependent Regulation of Clostridium difficile Stickland Metabolism

PubMed Central

Bouillaut, Laurent; Self, William T.

2013-01-01

Clostridium difficile, a proteolytic Gram-positive anaerobe, has emerged as a significant nosocomial pathogen. Stickland fermentation reactions are thought to be important for growth of C. difficile and appear to influence toxin production. In Stickland reactions, pairs of amino acids donate and accept electrons, generating ATP and reducing power in the process. Reduction of the electron acceptors proline and glycine requires the d-proline reductase (PR) and the glycine reductase (GR) enzyme complexes, respectively. Addition of proline in the medium increases the level of PR protein but decreases the level of GR. We report the identification of PrdR, a protein that activates transcription of the PR-encoding genes in the presence of proline and negatively regulates the GR-encoding genes. The results suggest that PrdR is a central metabolism regulator that controls preferential utilization of proline and glycine to produce energy via the Stickland reactions. PMID:23222730

Development and evaluation of nursing user interface screens using multiple methods.

PubMed

Hyun, Sookyung; Johnson, Stephen B; Stetson, Peter D; Bakken, Suzanne

2009-12-01

Building upon the foundation of the Structured Narrative Electronic Health Record (EHR) model, we applied theory-based (combined Technology Acceptance Model and Task-Technology Fit Model) and user-centered methods to explore nurses' perceptions of functional requirements for an electronic nursing documentation system, design user interface screens reflective of the nurses' perspectives, and assess nurses' perceptions of the usability of the prototype user interface screens. The methods resulted in user interface screens that were perceived to be easy to use, potentially useful, and well-matched to nursing documentation tasks associated with Nursing Admission Assessment, Blood Administration, and Nursing Discharge Summary. The methods applied in this research may serve as a guide for others wishing to implement user-centered processes to develop or extend EHR systems. In addition, some of the insights obtained in this study may be informative to the development of safe and efficient user interface screens for nursing document templates in EHRs.

Finding 'Evidence of Absence' in Medical Notes: Using NLP for Clinical Inferencing.

PubMed

Carter, Marjorie E; Divita, Guy; Redd, Andrew; Rubin, Michael A; Samore, Matthew H; Gupta, Kalpana; Trautner, Barbara W; Gundlapalli, Adi V

2016-01-01

Extracting evidence of the absence of a target of interest from medical text can be useful in clinical inferencing. The purpose of our study was to develop a natural language processing (NLP) pipelineto identify the presence of indwelling urinary catheters from electronic medical notes to aid in detection of catheter-associated urinary tract infections (CAUTI). Finding clear evidence that a patient does not have an indwelling urinary catheter is useful in making a determination regarding CAUTI. We developed a lexicon of seven core concepts to infer the absence of a urinary catheter. Of the 990,391 concepts extractedby NLP from a large corpus of 744,285 electronic medical notes from 5589 hospitalized patients, 63,516 were labeled as evidence of absence.Human review revealed three primary causes for false negatives. The lexicon and NLP pipeline were refined using this information, resulting in outputs with an acceptable false positive rate of 11%.

Military applications of emission and susceptibility data

NASA Astrophysics Data System (ADS)

Kohlbacher, Howard; Walker, William

A basic design consideration for new military communications-electronics (C-E) equipment is that it be electromagnetically compatible with the environment in which it will operate. A military standard (MIL-STD-461B) describes the design requirements for the control of the unintentional electromagnetic emission and susceptibility characteristics of electronic equipment and subsystems designed or procured by the US Department of Defense. For new systems which fail the test standards of MIL-STD-461B with regard to radiated susceptibility (RSO3) or radiated emissions (RE02), a decision must be made to fix the new system or to field it without a fix. A procedure to aid in the decision process is outlined. The minimum separation distances required between a failed test system and other C-E equipment in its environment to avoid interference are determined. If this distance is operationally acceptable, the failed unit may be considered to be operationally compatible with its electromagnetic environment.

Deep exclusive π+ electroproduction off the proton at CLAS

NASA Astrophysics Data System (ADS)

Park, K.; Guidal, M.; Gothe, R. W.; Laget, J. M.; Garçon, M.; Adhikari, K. P.; Aghasyan, M.; Amaryan, M. J.; Anghinolfi, M.; Avakian, H.; Baghdasaryan, H.; Ball, J.; Baltzell, N. A.; Battaglieri, M.; Bedlinsky, I.; Bennett, R. P.; Biselli, A. S.; Bookwalter, C.; Boiarinov, S.; Briscoe, W. J.; Brooks, W. K.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Charles, G.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Daniel, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Dodge, G. E.; Doughty, D.; Dupre, R.; Egiyan, H.; El Alaoui, A.; El Fassi, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Fleming, J. A.; Forest, T. A.; Fradi, A.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Gohn, W.; Golovatch, E.; Graham, L.; Griffioen, K. A.; Guegan, B.; Guo, L.; Hafidi, K.; Hakobyan, H.; Hanretty, C.; Heddle, D.; Hicks, K.; Ho, D.; Holtrop, M.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Jenkins, D.; Jo, H. S.; Keller, D.; Khandaker, M.; Khetarpal, P.; Kim, A.; Kim, W.; Klein, F. J.; Koirala, S.; Kubarovsky, A.; Kubarovsky, V.; Kuhn, S. E.; Kuleshov, S. V.; Livingston, K.; Lu, H. Y.; MacGregor, I. J. D.; Mao, Y.; Markov, N.; Martinez, D.; Mayer, M.; McKinnon, B.; Meyer, C. A.; Mineeva, T.; Mirazita, M.; Mokeev, V.; Moutarde, H.; Munevar, E.; Munoz Camacho, C.; Nadel-Turonski, P.; Nepali, C. S.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Pappalardo, L. L.; Paremuzyan, R.; Park, S.; Pasyuk, E.; Anefalos Pereira, S.; Phelps, E.; Pisano, S.; Pogorelko, O.; Pozdniakov, S.; Price, J. W.; Procureur, S.; Protopopescu, D.; Puckett, A. J. R.; Raue, B. A.; Ricco, G.; Rimal, D.; Ripani, M.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seder, E.; Seraydaryan, H.; Sharabian, Y. G.; Smith, E. S.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stoler, P.; Strakovsky, I. I.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tian, Ye; Tkachenko, S.; Trivedi, A.; Ungaro, M.; Vernarsky, B.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Weinstein, L. B.; Weygand, D. P.; Wood, M. H.; Zachariou, N.; Zhang, J.; Zhao, Z. W.; Zonta, I.

2013-01-01

The exclusive electroproduction of π + above the resonance region was studied using the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Laboratory by scattering a 6GeV continuous electron beam off a hydrogen target. The large acceptance and good resolution of CLAS, together with the high luminosity, allowed us to measure the cross section for the γ * p → nπ + process in 140 ( Q 2, x B , t) bins: 0.16 < x B < 0.58, 1.6 GeV2 < Q 2 < 4.5 GeV2 and 0.1 GeV2 < - t < 5.3 GeV2. For most bins, the statistical accuracy is on the order of a few percent. Differential cross sections are compared to four theoretical models, based either on hadronic or on partonic degrees of freedom. The four models can describe the gross features of the data reasonably well, but differ strongly in their ingredients. In particular, the model based on Generalized Parton Distributions (GPDs) contain the interesting potential to experimentally access transversity GPDs.

Acceptance of direct physician access to a computer-based patient record in a managed care setting.

PubMed

Dewey, J B; Manning, P; Brandt, S

1993-01-01

Kaiser Permanente Mid-Atlantic States has developed a fully integrated outpatient information system which currently runs on an IBM ES9000 on a VM platform written in MUMPS. The applications include Lab, Radiology, Transcription, Appointments. Pharmacy, Encounter tracking, Hospitalizations, Referrals, Phone Advice, Pap tracking, Problem list, Immunization tracking, and Patient demographics. They are department specific and require input and output from a dumb terminal. We have developed a physician's work station to access this information using PC compatible computers running Microsoft Windows and a custom Microsoft Visual Basic 2.0 environment which draws from these 14 applications giving the physician a comprehensive view of all electronic medical records. Through rapid prototyping, voluntary participation, formal training and gradual implementation we have created an enthusiastic response. 95% of our physician PC users access the system each month. The use ranges from 0.2 to 3.0 screens of data viewed per patient visit. This response continues to drive the process toward still greater user acceptance and further practice enhancement.

Decision support tools for proton therapy ePR: intelligent treatment planning navigator and radiation toxicity tool for evaluating of prostate cancer treatment

NASA Astrophysics Data System (ADS)

Le, Anh H.; Deshpande, Ruchi; Liu, Brent J.

2010-03-01

The electronic patient record (ePR) has been developed for prostate cancer patients treated with proton therapy. The ePR has functionality to accept digital input from patient data, perform outcome analysis and patient and physician profiling, provide clinical decision support and suggest courses of treatment, and distribute information across different platforms and health information systems. In previous years, we have presented the infrastructure of a medical imaging informatics based ePR for PT with functionality to accept digital patient information and distribute this information across geographical location using Internet protocol. In this paper, we present the ePR decision support tools which utilize the imaging processing tools and data collected in the ePR. The two decision support tools including the treatment plan navigator and radiation toxicity tool are presented to evaluate prostate cancer treatment to improve proton therapy operation and improve treatment outcomes analysis.

Day of the week effect in paper submission/acceptance/rejection to/in/by peer review journals

NASA Astrophysics Data System (ADS)

Ausloos, Marcel; Nedic, Olgica; Dekanski, Aleksandar

2016-08-01

This paper aims at providing an introduction to the behavior of authors submitting a paper to a scientific journal. Dates of electronic submission of papers to the Journal of the Serbian Chemical Society have been recorded from the 1st January 2013 till the 31st December 2014, thus over 2 years. There is no Monday or Friday effect like in financial markets, but rather a Tuesday-Wednesday effect occurs: papers are more often submitted on Wednesday; however, the relative number of going to be accepted papers is larger if these are submitted on Tuesday. On the other hand, weekend days (Saturday and Sunday) are not the best days to finalize and submit manuscripts. An interpretation based on the type of submitted work ("experimental chemistry") and on the influence of (senior) coauthors is presented. A thermodynamic connection is proposed within an entropy context. A (new) entropic distance is defined in order to measure the "opaqueness" = disorder) of the submission process.

Pathways between Parent-Child Interactions and Peer Acceptance: The Role of Children's Social Information Processing

ERIC Educational Resources Information Center

Rah, Yumee; Parke, Ross D.

2008-01-01

This study examined the links among parents' interaction styles, their children's social information processing, and peer acceptance. Fourth-grade children (N = 159) and their parents were observed during family discussions. One year later peer acceptance and children's information processing choices (goals, strategies, and attributions) in…

Use of dissolved H2 concentrations to determine distribution of microbially catalyzed redox reactions in anoxic groundwater

USGS Publications Warehouse

Lovley, D.R.; Chapelle, F.H.; Woodward, J.C.

1994-01-01

The potential for using concentrations of dissolved H2 to determine the distribution of redox processes in anoxic groundwaters was evaluated. In pristine aquifers in which standard geochemical measurements indicated that Fe-(III) reduction, sulfate reduction, or methanogenesis was the terminal electron accepting process (TEAP), the H2 concentrations were similar to the H2 concentrations that have previously been reported for aquatic sediments with the same TEAPs. In two aquifers contaminated with petroleum products, it was impossible with standard geochemical analyses to determine which TEAPs predominated in specific locations. However, the TEAPs predicted from measurements of dissolved H2 were the same as those determined directly through measurements of microbial processes in incubated aquifer material. These results suggest that H2 concentrations may be a useful tool for analyzing the redox chemistry of nonequilibrium groundwaters.

Possible implications of large scale radiation processing of food

NASA Astrophysics Data System (ADS)

Zagórski, Z. P.

Large scale irradiation has been discussed in terms of the participation of processing cost in the final value of the improved product. Another factor has been taken into account and that is the saturation of the market with the new product. In the case of succesful projects the participation of irradiation cost is low, and the demand for the better product is covered. A limited availability of sources makes the modest saturation of the market difficult with all food subjected to correct radiation treatment. The implementation of the preservation of food needs a decided selection of these kinds of food which comply to all conditions i.e. of acceptance by regulatory bodies, real improvement of quality and economy. The last condition prefers the possibility of use of electron beams of low energy. The best fullfilment of conditions for succesful processing is observed in the group of dry food, in expensive spices in particular.

A Survey of Professor Acceptance and Use of E-Textbooks in Higher Education

ERIC Educational Resources Information Center

Brown, Randy

2013-01-01

As electronic books (e-books) have continued to gain in popularity, more and more books are becoming available in electronic format. Textbooks are no exception. More and more publishers are making textbooks available in electronic format (e-textbooks). There have been many devices specifically designed to use e-books and e-textbooks with many more…

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, A; Rangaraj, D; Perez-Andujar, A

2016-06-15

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each weremore » calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.« less

Building a Foundation to Reduce Health Inequities: Routine Collection of Sociodemographic Data in Primary Care.

PubMed

Pinto, Andrew D; Glattstein-Young, Gabriela; Mohamed, Anthony; Bloch, Gary; Leung, Fok-Han; Glazier, Richard H

2016-01-01

Detailed data on social determinants of health can facilitate the identification of inequities in access to health care. We report on a sociodemographic data collection tool used in a family medicine clinic. Four major health organizations in Toronto collaborated to identify a set of 14 questions that covered a range of social determinants of health. These were translated into 13 languages. This survey was self-administered using an electronic tablet to a convenience sample of 407 patients in the waiting room of a primary care clinic. Data were uploaded directly to the electronic medical record. The rate of valid responses provided for each question was high, ranging from 84% to 100%. The questions with the highest number of patients selecting "do not know" and "prefer not to answer" pertained to disabilities and income. Patients reported finding the process acceptable. In subsequent implementation across 5 clinics, 10,536 patients have been surveyed; only 724 (6.9%) declined to participate. Collecting data on social determinants of health through a self-administered survey, and linking them to a patient's chart, is feasible and acceptable. A modified survey is now administered to all patients. Such data are already being used to identify health inequities, develop novel interventions, and evaluate their impact on health outcomes. © Copyright 2016 by the American Board of Family Medicine.

The Decision to Publish Electronically.

ERIC Educational Resources Information Center

Craig, Gary

1983-01-01

Argues that decision to publish a given intellectual product "electronically" is a business decision based on customer needs, available format alternatives, current business climate, and variety of already existing factors. Publishers are most influenced by customers' acceptance of new products and their own role as intermediaries in…

Processing electronic photos of Mercury produced by ground based observation

NASA Astrophysics Data System (ADS)

Ksanfomality, Leonid

New images of Mercury have been obtained by processing of ground based observations that were carried out using the short exposure technique. The disk of the planet extendeds usually from 6 to 7 arc seconds, with the linear size of the image in a focal plane of the telescope about 0.3-0.5 mm on the average. Processing initial millisecond electronic photos of the planet is very labour-consuming. Some features of processing of initial millisecond electronic photos by methods of correlation stacking were considered in (Ksanfomality et al., 2005; Ksanfomality and Sprague, 2007). The method uses manual selection of good photos including a so-called pilot- file, the search for which usually must be done manually. The pilot-file is the most successful one, in opinion of the operator. It defines the future result of the stacking. To change pilot-files increases the labor of processing many times. Programs of processing analyze the contents of a sample, find in it any details, and search for recurrence of these almost imperceptible details in thousand of other stacking electronic pictures. If, proceeding from experience, the form and position of a pilot-file still can be estimated, the estimation of a reality of barely distinct details in it is somewhere in between the imaging and imagination. In 2006-07 some programs of automatic processing have been created. Unfortunately, the efficiency of all automatic programs is not as good as manual selection. Together with the selection, some other known methods are used. The point spread function (PSF) is described by a known mathematical function which in its central part decreases smoothly from the center. Usually the width of this function is accepted at a level 0.7 or 0.5 of the maxima. If many thousands of initial electronic pictures are acquired, it is possible during their processing to take advantage of known statistics of random variables and to choose the width of the function at a level, say, 0.9 maxima. Then the resolution of the image improves appreciably. The essential element of processing is the mathematical model of unsharp mask. But this is a two-edged instrument. The result depends on a choice of the size of the mask. If the size is too small, all low spatial frequencies will be lost, and the image becomes grey uniformly; on the contrary, if the size of the unsharp mask is too great, all fine details disappear. In some cases the compromise in selection of parameters of the unsharp mask becomes critical.

Detection of one-dimensional migration of single self-interstitial atoms in tungsten using high-voltage electron microscopy

PubMed Central

Amino, T.; Arakawa, K.; Mori, H.

2016-01-01

The dynamic behaviour of atomic-size disarrangements of atoms—point defects (self-interstitial atoms (SIAs) and vacancies)—often governs the macroscopic properties of crystalline materials. However, the dynamics of SIAs have not been fully uncovered because of their rapid migration. Using a combination of high-voltage transmission electron microscopy and exhaustive kinetic Monte Carlo simulations, we determine the dynamics of the rapidly migrating SIAs from the formation process of the nanoscale SIA clusters in tungsten as a typical body-centred cubic (BCC) structure metal under the constant-rate production of both types of point defects with high-energy electron irradiation, which must reflect the dynamics of individual SIAs. We reveal that the migration dimension of SIAs is not three-dimensional (3D) but one-dimensional (1D). This result overturns the long-standing and well-accepted view of SIAs in BCC metals and supports recent results obtained by ab-initio simulations. The SIA dynamics clarified here will be one of the key factors to accurately predict the lifetimes of nuclear fission and fusion materials. PMID:27185352

Electronic-Nose Applications for Fruit Identification, Ripeness and Quality Grading

PubMed Central

Baietto, Manuela; Wilson, Alphus D.

2015-01-01

Fruits produce a wide range of volatile organic compounds that impart their characteristically distinct aromas and contribute to unique flavor characteristics. Fruit aroma and flavor characteristics are of key importance in determining consumer acceptance in commercial fruit markets based on individual preference. Fruit producers, suppliers and retailers traditionally utilize and rely on human testers or panels to evaluate fruit quality and aroma characters for assessing fruit salability in fresh markets. We explore the current and potential utilization of electronic-nose devices (with specialized sensor arrays), instruments that are very effective in discriminating complex mixtures of fruit volatiles, as new effective tools for more efficient fruit aroma analyses to replace conventional expensive methods used in fruit aroma assessments. We review the chemical nature of fruit volatiles during all stages of the agro-fruit production process, describe some of the more important applications that electronic nose (e-nose) technologies have provided for fruit aroma characterizations, and summarize recent research providing e-nose data on the effectiveness of these specialized gas-sensing instruments for fruit identifications, cultivar discriminations, ripeness assessments and fruit grading for assuring fruit quality in commercial markets. PMID:25569761

Natural organic matter as electron acceptor: experimental evidence for its important role in anaerobic respiration

NASA Astrophysics Data System (ADS)

Lau, Maximilian Peter; Sander, Michael; Gelbrecht, Jörg; Hupfer, Michael

2014-05-01

Microbial respiration is a key driver of element cycling in oxic and anoxic environments. Upon depletion of oxygen as terminal electron acceptor (TEA), a number of anaerobic bacteria can employ alternative TEA for intracellular energy generation. Redox active quinone moieties in dissolved organic matter (DOM) are well known electron acceptors for microbial respiration. However, it remains unclear whether quinones in adsorbed and particulate OM accept electrons in a same way. In our studies we aim to understand the importance of natural organic matter (NOM) as electron acceptors for microbial energy gain and its possible implications for methanogenesis. Using a novel electrochemical approach, mediated electrochemical reduction and -oxidation, we can directly quantify reduced hydroquinone and oxidized quionone moieties in dissolved and particulate NOM samples. In a mesocosm experiment, we rewetted sediment and peat soil and followed electron transfer to the inorganic and organic electron acceptors over time. We found that inorganic and organic electron acceptor pools were depleted over the same timescales. More importantly, we showed that organic, NOM-associated electron accepting moieties represent as much as 21 40% of total TEA inventories. These findings support earlier studies that propose that the reduction of quinone moieties in particulate organic matter competitively suppresses methanogenesis in wetland soils. Our results indicate that electron transfer to organic, particulate TEA in inundated ecosystems has to be accounted for when establishing carbon budgets in and projecting greenhouse gas emissions from these systems.

Comparison of SEM and VPSEM imaging techniques with respect to Streptococcus mutans biofilm topography.

PubMed

Weber, Kathryn; Delben, Juliana; Bromage, Timothy G; Duarte, Simone

2014-01-01

The study compared images of mature Streptococcus mutans biofilms captured at increasing magnification to determine which microscopy method is most acceptable for imaging the biofilm topography and the extracellular polymeric substance (EPS). In vitro S. mutans biofilms were imaged using (1) scanning electron microscopy (SEM), which requires a dehydration process; (2) SEM and ruthenium red (SEM-RR), which has been shown to support the EPS of biofilms during the SEM dehydration; and (3) variable pressure scanning electron microscopy (VPSEM), which does not require the intensive dehydration process of SEM. The dehydration process and high chamber vacuum of both SEM techniques devastated the biofilm EPS, removed supporting structures, and caused cracking on the biofilm surface. The VPSEM offered the most comprehensive representation of the S. mutans biofilm morphology. VPSEM provides similar contrast and focus as the SEM, but the procedure is far less time-consuming, and the use of hazardous chemicals associated with SEM dehydration protocol is avoided with the VPSEM. The inaccurate representations of the biofilm EPS in SEM experimentation is a possible source of inaccurate data and impediments in the study of S. mutans biofilms. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Isoindigo-Based Small Molecules with Varied Donor Components for Solution-Processable Organic Field Effect Transistor Devices.

PubMed

Patil, Hemlata; Chang, Jingjing; Gupta, Akhil; Bilic, Ante; Wu, Jishan; Sonar, Prashant; Bhosale, Sheshanath V

2015-09-18

Two solution-processable small organic molecules, (E)-6,6'-bis(4-(diphenylamino)phenyl)-1,1'-bis(2-ethylhexyl)-(3,3'-biindolinylidene)-2,2'-dione (coded as S10) and (E)-6,6'-di(9H-carbazol-9-yl)-1,1'-bis(2-ethylhexyl)-(3,3'-biindolinylidene)-2,2'-dione (coded as S11) were successfully designed, synthesized and fully characterized. S10 and S11 are based on a donor-acceptor-donor structural motif and contain a common electron accepting moiety, isoindigo, along with different electron donating functionalities, triphenylamine and carbazole, respectively. Ultraviolet-visible absorption spectra revealed that the use of triphenylamine donor functionality resulted in an enhanced intramolecular charge transfer transition and reduction of optical band gap, when compared with its carbazole analogue. Both of these materials were designed to be donor semiconducting components, exerted excellent solubility in common organic solvents, showed excellent thermal stability, and their promising optoelectronic properties encouraged us to scrutinize charge-carrier mobilities using solution-processable organic field effect transistors. Hole mobilities of the order of 2.2 × 10(-4) cm²/Vs and 7.8 × 10(-3) cm²/Vs were measured using S10 and S11 as active materials, respectively.

Microbial production of organic acids in aquitard sediments and its role in aquifer geochemistry

USGS Publications Warehouse

McMahon, P.B.; Chapelle, F.H.

1991-01-01

MICROBIAL activity in aquifers plays an important part in the chemical evolution of ground water1-5. The most important terminal electron-accepting microbial processes in deeply buried anaerobic aquifers are iron reduction, sulphate reduction and methanogenesis5-8, each of which requires simple organic compounds or hydrogen (H2) as electron donors. Until now, the source of these compounds was unknown because the concentrations of dissolved organic carbon and sedimentary organic carbon in aquifers are extremely low9-11. Here we show that rates of microbial fermentation exceed rates of respiration in organic-rich aquitards (low-permeability sediments stratigraphically adjacent to higher-permeability aquifer sediments), resulting in a net accumulation of simple organic acids in pore waters. In aquifers, however, respiration outpaces fermentation, resulting in a net consumption of organic acids. The concentration gradient that develops in response to these two processes drives a net diffusive flux of organic acids from aquitards to aquifers. Diffusion calculations demonstrate that rates of organic acid transport are sufficient to account for observed rates of microbial respiration in aquifers. This overall process effectively links the large pool of sedimentary organic carbon in aquitards to microbial respiration in aquifers, and is a principal mechanism driving groundwater chemistry changes in aquifers.

40 CFR 60.758 - Recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Waste Landfills § 60.758 Recordkeeping requirements. (a) Except as provided in § 60.752(b)(2)(i)(B... triggered § 60.752(b), the current amount of solid waste in-place, and the year-by-year waste acceptance... electronic formats are acceptable. (b) Except as provided in § 60.752(b)(2)(i)(B), each owner or operator of...

40 CFR 60.758 - Recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Waste Landfills § 60.758 Recordkeeping requirements. (a) Except as provided in § 60.752(b)(2)(i)(B... triggered § 60.752(b), the current amount of solid waste in-place, and the year-by-year waste acceptance... electronic formats are acceptable. (b) Except as provided in § 60.752(b)(2)(i)(B), each owner or operator of...

40 CFR 60.758 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Waste Landfills § 60.758 Recordkeeping requirements. (a) Except as provided in § 60.752(b)(2)(i)(B... triggered § 60.752(b), the current amount of solid waste in-place, and the year-by-year waste acceptance... electronic formats are acceptable. (b) Except as provided in § 60.752(b)(2)(i)(B), each owner or operator of...

Investigating the Determinants and Age and Gender Differences in the Acceptance of Mobile Learning

ERIC Educational Resources Information Center

Wang, Yi-Shun; Wu, Ming-Cheng; Wang, Hsiu-Yuan

2009-01-01

With the proliferation of mobile computing technology, mobile learning (m-learning) will play a vital role in the rapidly growing electronic learning market. M-learning is the delivery of learning to students anytime and anywhere through the use of wireless Internet and mobile devices. However, acceptance of m-learning by individuals is critical…

Internet Acceptable User Policies in Alabama School Systems.

ERIC Educational Resources Information Center

Sun, Feng; McLean, James E.

The purpose of this study was to determine the current status of and need for acceptable use policies (AUPs) for students' use of the Internet in Alabama school systems. Alabama superintendents were questioned using an electronic survey that could be returned via e-mail on an anonymous Internet site. Primary questions were: (1) What is your level…

The Impact of Gamma Radiation on Sediment Microbial Processes

PubMed Central

Brown, Ashley R.; Boothman, Christopher; Pimblott, Simon M.

2015-01-01

Microbial communities have the potential to control the biogeochemical fate of some radionuclides in contaminated land scenarios or in the vicinity of a geological repository for radioactive waste. However, there have been few studies of ionizing radiation effects on microbial communities in sediment systems. Here, acetate and lactate amended sediment microcosms irradiated with gamma radiation at 0.5 or 30 Gy h−1 for 8 weeks all displayed NO3− and Fe(III) reduction, although the rate of Fe(III) reduction was decreased in 30-Gy h−1 treatments. These systems were dominated by fermentation processes. Pyrosequencing indicated that the 30-Gy h−1 treatment resulted in a community dominated by two Clostridial species. In systems containing no added electron donor, irradiation at either dose rate did not restrict NO3−, Fe(III), or SO42− reduction. Rather, Fe(III) reduction was stimulated in the 0.5-Gy h−1-treated systems. In irradiated systems, there was a relative increase in the proportion of bacteria capable of Fe(III) reduction, with Geothrix fermentans and Geobacter sp. identified in the 0.5-Gy h−1 and 30-Gy h−1 treatments, respectively. These results indicate that biogeochemical processes will likely not be restricted by dose rates in such environments, and electron accepting processes may even be stimulated by radiation. PMID:25841009

Possibilities and Implications of Using the ICF and Other Vocabulary Standards in Electronic Health Records.

PubMed

Vreeman, Daniel J; Richoz, Christophe

2015-12-01

There is now widespread recognition of the powerful potential of electronic health record (EHR) systems to improve the health-care delivery system. The benefits of EHRs grow even larger when the health data within their purview are seamlessly shared, aggregated and processed across different providers, settings and institutions. Yet, the plethora of idiosyncratic conventions for identifying the same clinical content in different information systems is a fundamental barrier to fully leveraging the potential of EHRs. Only by adopting vocabulary standards that provide the lingua franca across these local dialects can computers efficiently move, aggregate and use health data for decision support, outcomes management, quality reporting, research and many other purposes. In this regard, the International Classification of Functioning, Disability, and Health (ICF) is an important standard for physiotherapists because it provides a framework and standard language for describing health and health-related states. However, physiotherapists and other health-care professionals capture a wide range of data such as patient histories, clinical findings, tests and measurements, procedures, and so on, for which other vocabulary standards such as Logical Observation Identifiers Names and Codes and Systematized Nomenclature Of Medicine Clinical Terms are crucial for interoperable communication between different electronic systems. In this paper, we describe how the ICF and other internationally accepted vocabulary standards could advance physiotherapy practise and research by enabling data sharing and reuse by EHRs. We highlight how these different vocabulary standards fit together within a comprehensive record system, and how EHRs can make use of them, with a particular focus on enhancing decision-making. By incorporating the ICF and other internationally accepted vocabulary standards into our clinical information systems, physiotherapists will be able to leverage the potent capabilities of EHRs and contribute our unique clinical perspective to other health-care providers within the emerging electronic health information infrastructure. Copyright © 2013 John Wiley & Sons, Ltd.

Defining redox centers in human electron transfer flavoprotein: ubiquinone oxidoreductase (ETF:QO) by expression in Saccharomyces cerevisiae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frerman, F.E.; Beard, S.; Goodman, S.I.

Mutations in ETF or ETC:QO cause glutaric acidemia type II (GA2). ETF:QO is an iron-sulfur flavoprotein in the inner mitochondrial membrane which transfers electrons from ETF in the mitochondrial matrix to ubiquinone (Q). The human ETF:QO gene is on chromosome 4q32{r_arrow}qter, and encodes a 617 amino acid precursor which is processed to the 64 kDa mature form in the mitochondrion. One ETF:QO mutation in GA2 is a G{r_arrow}T transversion in a donor splice site, deleting the 222 bp upstream exon from the transcript. The deleted 74 amino acids are near the carboxyl terminus just beyond a predicted membrane helix, andmore » include C561, one of four cysteine residues predicted to ligate the 4Fe4S cluster. The mutant protein is not stable in patient fibroblasts. We have expressed cDNAs encoding wild type (wt) ETF:QO, ETF:QO with the 74 amino acid deletion, and ETFF:QO with only a C561A mutation, in S cerevisiae. In all instances, precursor and mature ETF:QOs were stably inserted into the mitochondrial membrane. ETF:QO (C561A) is extracted from the membrane under the same conditions as wt ETF:QO, but ETF:QO with the deletion is much more difficult to extract. Wt ETF:QO accepts electrons from ETF and reduces Q but, while both mutant proteins accept electrons from ETF, neither of them reduces Q. This work demonstrates that C561 in human ETF:QO is essential for Q reduction (probably because it ligands the 4Fe4S cluster), that mutant proteins that are unstable in man may be stable in other systems, that cleavage of signal peptide from precursor proteins can occur within the inner mitochondrial membrane, and the general usefulness of expressing human mitochondrial proteins in yeast.« less

Acceptance and Avoidance Processes at Different Levels of Psychological Recovery from Enduring Mental Illness.

PubMed

Siqueira, Vinicius R; Oades, Lindsay G

2015-01-01

Objective. This study examined the use of psychological acceptance and experiential avoidance, two key concepts of Acceptance and Commitment Therapy (ACT), in the psychological recovery process of people with enduring mental illness. Method. Sixty-seven participants were recruited from the metropolitan, regional, and rural areas of New South Wales, Australia. They all presented some form of chronic mental illness (at least 12 months) as reflected in DSM-IV Axis I diagnostic criteria. The Acceptance and Action Questionnaire (AAQ-19) was used to measure the presence of psychological acceptance and experiential avoidance; the Recovery Assessment Scale (RAS) was used to examine the levels of psychological recovery; and the Scales of Psychological Well-Being was used to observe if there are benefits in utilizing psychological acceptance and experiential avoidance in the recovery process. Results. An analysis of objectively quantifiable measures found no clear correlation between the use of psychological acceptance and recovery in mental illness as measured by the RAS. The data, however, showed a relationship between psychological acceptance and some components of recovery, thereby demonstrating its possible value in the recovery process. Conclusion. The major contribution of this research was the emerging correlation that was observed between psychological acceptance and positive levels of psychological well-being among individuals with mental illness.

Electronic alerts and clinician turnover: the influence of user acceptance.

PubMed

Hysong, Sylvia J; Spitzmuller, Christiane; Espadas, Donna; Sittig, Dean F; Singh, Hardeep

2014-11-01

Use of certain components of electronic health records (EHRs), such as EHR-based alerting systems (EASs), might reduce provider satisfaction, a strong precursor to turnover. We examined the impact of factors likely to influence providers' acceptance of an alerting system, designed to facilitate electronic communication in outpatient settings, on provider satisfaction, intentions to quit, and turnover. We conducted a cross-sectional Web-based survey of EAS-related practices from a nationwide sample of primary care providers (PCPs) practicing at Department of Veterans Affairs (VA) medical facilities. Of 5001 invited VA PCPs, 2590 completed the survey. We relied on Venkatesh's Unified Theory of Acceptance and Use of Technology to create survey measures of 4 factors likely to impact user acceptance of EAS: supportive norms, monitoring/ feedback, training, and providers' perceptions of the value (PPOV) of EASs to provider effectiveness. Facility-level PCP turnover was measured via the VA's Service Support Center Human Resources Cube. Hypotheses were tested using structural equation modeling. After accounting for intercorrelations among predictors, monitoring/feedback regarding EASs significantly predicted intention to quit (b = 0.30, P < .01), and PPOV of EASs predicted both overall provider satisfaction (b = 0.58, P < .01) and facility-level provider turnover levels (b = -0.19, P < .05), all without relying on any intervening mechanisms. Design, implementation, and use of EASs might impact provider satisfaction and retention. Institutions should consider strategies to help providers perceive greater value in these clinical tools.

Palliative care for people with advanced liver disease: A feasibility trial of a supportive care liver nurse specialist.

PubMed

Kimbell, Barbara; Murray, Scott A; Byrne, Heidi; Baird, Andrea; Hayes, Peter C; MacGilchrist, Alastair; Finucane, Anne; Brookes Young, Patricia; O'Carroll, Ronan E; Weir, Christopher J; Kendall, Marilyn; Boyd, Kirsty

2018-05-01

Liver disease is an increasing cause of death worldwide but palliative care is largely absent for these patients. We conducted a feasibility trial of a complex intervention delivered by a supportive care liver nurse specialist to improve care coordination, anticipatory care planning and quality of life for people with advanced liver disease and their carers. Patients received a 6-month intervention (alongside usual care) from a specially trained liver nurse specialist. The nurse supported patients/carers to live as well as possible with the condition and acted as a resource to facilitate care by community professionals. A mixed-method evaluation was conducted. Case note analysis and questionnaires examined resource use, care planning processes and quality-of-life outcomes over time. Interviews with patients, carers and professionals explored acceptability, effectiveness, feasibility and the intervention. Patients with advanced liver disease who had an unplanned hospital admission with decompensated cirrhosis were recruited from an inpatient liver unit. The intervention was delivered to patients once they had returned home. We recruited 47 patients, 27 family carers and 13 case-linked professionals. The intervention was acceptable to all participants. They welcomed access to additional expert advice, support and continuity of care. The intervention greatly increased the number of electronic summary care plans shared by primary care and hospitals. The Palliative care Outcome Scale and EuroQol-5D-5L questionnaire were suitable outcome measurement tools. This nurse-led intervention proved acceptable and feasible. We have refined the recruitment processes and outcome measures for a future randomised controlled trial.

US/UK Loan Account Project Status PMOD477

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, Patrice A.

2012-07-12

The viewgraphs describe the status of PMOD477 for LANL. The meeting will occur at DOE-HQ with NA-11 and Military Applications personnel in attendance. Serves to repatriate material with a balance to zero by December 2012. Phase 1 -- Establish formality of operations for War Reserve (WR): Complete surrogate taskings to A90 through a Materials Channel and perform US/UK lessons learned; Complete the US/UK agreed Quality Acceptance Plan, Materials Plan, Shipping procedure, and establish the formal UK/US point of contacts. Phase 2 -- Metal Manufacture (WR): Process material and store material as electrorefined metal (ER) rings, with initial assay and isotopicmore » analysis, prior to manufacturing. Material is cast into accepted configuration and appropriate acceptance document for each aliquot will be generated. Phase 3 -- Intermediate Material Manufacture, Packaging and Shipping (WR): Continue processing of the material in accepted configuration with appropriate acceptance documentation for each aliquot. Provide an initial tasking of the material owed to UK including appropriate quality acceptance documentation. Phase 4 -- Complete Tasking (WR). Phase 5 -- Residue Processing (Non-WR): Complete processing of residue material and waste into accepted configuration with appropriate acceptance document for disposal.« less

Co-simulation of heavy truck tire dynamics and electronic stability control systems (phase B).

DOT National Transportation Integrated Search

2010-07-01

In the past decade, electronic stability controls (ESC) have become increasingly common on vehicles operating in the United States. The acceptance of this technology has progressed to the point where all new passenger vehicles sold in the US are requ...

48 CFR 1609.7101-1 - Community-rated carrier incentive performance elements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... “Enrollment Instructions” in the FEHB Supplemental Literature Guidelines in the FEHB contract. The contracting officer will evaluate this item based on the carrier's ability to accept electronic data transmission from the OPM designated electronic enrollment system and issue ID cards timely. (ii) Enrollment...

Structural and optical characteristics of GaAs films grown on Si/Ge substrates

NASA Astrophysics Data System (ADS)

Rykov, A. V.; Dorokhin, M. V.; Vergeles, P. S.; Baidus, N. V.; Kovalskiy, V. A.; Yakimov, E. B.; Soltanovich, O. A.

2018-03-01

A GaAs/AlAs heterostructure and a GaAs film grown on Si/Ge substrates have been fabricated and studied. A Ge buffer on a silicon substrate was fabricated using the MBE process. A3B5 films were grown by MOCVD at low pressures. Photoluminescence spectroscopy was used to define the optical quality of A3B5 films. Structural properties were investigated using the electron beam induced current method. It was established that despite a rather high density of dislocations on the epitaxial layers, the detected photoluminescence radiation of layers indicates the acceptable crystalline quality of the top GaAs layer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, S.B.; Walton, T.C.

Polyimides have gained wide acceptance for use in many aerospace composite, electrical, and industrial applications. The intent of this work is to share with the reader practical knowledge of how some of the currently available commercial systems perform. Several prepreg processable polyimide systems were evaluated for adhesive properties and characterized with the use of SEM, TGA, DSC, TMA, Dynamic Spectroscopy, and Force vs. Time Electronic Impact Analyses for comparison. The chemistry and nature of these resin systems is reviewed, including several BMIs (new hot melts examined)., Amide-Imides (Al) and Thermoplastic Polyimide (TPI). PMR-15 and a high temperature epoxy resin aremore » included for comparison of high temperature properties. 17 references.« less

U.S. Central Command Headquarters’ Use of the Government Purchase Card

DTIC Science & Technology

2011-01-25

required the coordinator to document training sessions. During our review, the squadron was developing a new electronic system to support the...approving officials and cardholders. 2. Establish a plan to ensure that the new electronic Government Purchase Card Tracking system is completed...tickets,” invoices, shipping/packing documents or receiving reports, or electronic purchase confirmations are acceptable) for each purchase and other

Electron transfer from a solid-state electrode assisted by methyl viologen sustains efficient microbial reductive dechlorination of TCE.

PubMed

Aulenta, Federico; Catervi, Alessandro; Majone, Mauro; Panero, Stefania; Reale, Priscilla; Rossetti, Simona

2007-04-01

The ability to transfer electrons, via an extracellular path, to solid surfaces is typically exploited by microorganisms which use insoluble electron acceptors, such as iron-or manganese-oxides or inert electrodes in microbial fuel cells. The reverse process, i.e., the use of solid surfaces or electrodes as electron donors in microbial respirations, although largely unexplored, could potentially have important environmental applications, particularly for the removal of oxidized pollutants from contaminated groundwater or waste streams. Here we show, for the first time, that an electrochemical cell with a solid-state electrode polarized at -500 mV (vs standard hydrogen electrode), in combination with a low-potential redox mediator (methyl viologen), can efficiently transfer electrochemical reducing equivalents to microorganisms which respire using chlorinated solvents. By this approach, the reductive transformation of trichloroethene, a toxic yet common groundwater contaminant, to harmless end-products such as ethene and ethane could be performed. Furthermore, using a methyl-viologen-modified electrode we could even demonstrate that dechlorinating bacteria were able to accept reducing equivalents directly from the modified electrode surface. The innovative concept, based on the stimulation of dechlorination reactions through the use of solid-state electrodes (we propose for this process the acronym BEARD: Bio-Electrochemically Assisted Reductive Dechlorination), holds promise for in situ bioremediation of chlorinated-solvent-contaminated groundwater, and has several potential advantages over traditional approaches based on the subsurface injection of organic compounds. The results of this study raise the possibility that immobilization of selected redox mediators may be a general strategy for stimulating and controlling a range of microbial reactions using insoluble electrodes as electron donors.

Random Vibration Testing of Advanced Wet Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2015-01-01

Advanced wet tantalum capacitors allow for improved performance of power supply systems along with substantial reduction of size and weight of the systems that is especially beneficial for space electronics. Due to launch-related stresses, acceptance testing of all space systems includes random vibration test (RVT). However, many types of advanced wet tantalum capacitors cannot pass consistently RVT at conditions specified in MIL-PRF-39006, which impedes their use in space projects. This requires a closer look at the existing requirements, modes and mechanisms of failures, specifics of test conditions, and acceptance criteria. In this work, different lots of advanced wet tantalum capacitors from four manufacturers have been tested at step stress random vibration conditions while their currents were monitored before, during, and after the testing. It has been shown that the robustness of the parts and their reliability are mostly due to effective self-healing processes and limited current spiking or minor scintillations caused by RVT do not increase the risk of failures during operation. A simple model for scintillations events has been used to simulate current spiking during RVT and optimize test conditions. The significance of scintillations and possible effects of gas generation have been discussed and test acceptance criteria for limited current spiking have been suggested.

Plastics disassembly versus bulk recycling: engineering design for end-of-life electronics resource recovery.

PubMed

Rios, Pedro; Stuart, Julie Ann; Grant, Ed

2003-12-01

Annual plastic flows through the business and consumer electronics manufacturing supply chain include nearly 3 billion lb of high-value engineering plastics derived from petroleum. The recovery of resource value from this stream presents critical challenges in areas of materials identification and recycling process design that demand new green engineering technologies applied together with life cycle assessment and ecological supply chain analysis to create viable plastics-to-plastics supply cycles. The sustainable recovery of potentially high-value engineering plastics streams requires that recyclers either avoid mixing plastic parts or purify later by separating smaller plastic pieces created in volume reduction (shredding) steps. Identification and separation constitute significant barriers in the plastics-to-plastics recycling value proposition. In the present work, we develop a model that accepts randomly arriving electronic products to study scenarios by which a recycler might identify and separate high-value engineering plastics as well as metals. Using discrete eventsimulation,we compare current mixed plastics recovery with spectrochemical plastic resin identification and subsequent sorting. Our results show that limited disassembly with whole-part identification can produce substantial yields in separated streams of recovered engineering thermoplastics. We find that disassembly with identification does not constitute a bottleneck, but rather, with relatively few workers, can be configured to pull the process and thus decrease maximum staging space requirements.

Australians' views on carbon pricing before and after the 2013 federal election

NASA Astrophysics Data System (ADS)

Dreyer, Stacia J.; Walker, Iain; McCoy, Shannon K.; Teisl, Mario F.

2015-12-01

As climate policies change through the legislative process, public attitudes towards them may change as well. Therefore, it is important to assess how people accept and support controversial climate policies as the policies change over time. Policy acceptance is a positive evaluation of, or attitude towards, an existing policy; policy support adds an active behavioural component. Acceptance does not necessarily lead to support. We conducted a national survey of Australian residents to investigate acceptance of, and support for, the Australian carbon pricing policy before and after the 2013 federal election, and how perceptions of the policy, economic ideology, and voting behaviour affect acceptance and support. We found acceptance and support were stable across the election period, which was surprising given that climate policy was highly contentious during the election. Policy acceptance was higher than policy support at both times and acceptance was a necessary but insufficient condition of support. We conclude that acceptance is an important process through which perceptions of the policy and economic ideology influence support. Therefore, future climate policy research needs to distinguish between acceptance and support to better understand this process, and to better measure these concepts.

Increasing Access to Farmers Markets for Beneficiaries of Nutrition Assistance: Evaluation of the Farmers Market Access Project

PubMed Central

Cole, Kate; Kinney, Karen; Fisher, Kari; Krieger, James W.

2013-01-01

Introduction Increased acceptance of nutrition benefits at farmers markets could improve access to nutritious foods for low-income shoppers. The objective of this study was to evaluate a pilot project to increase participation by farmers markets and their vendors in the Supplemental Nutrition Assistance Program (SNAP) and Special Supplemental Nutrition Program for Women, Infants, and Children (WIC). Methods The intervention targeted 9 markets in lower-income regions of King County, Washington. Markets and vendors were offered subsidized electronic benefits transfer (EBT) terminals for processing SNAP, and vendors could apply to accept WIC cash value vouchers. WIC staff received information on using SNAP and vouchers at farmers markets. We used mixed methods post-implementation to measure participation, describe factors in acceptance of benefits, and assess information needs for WIC staff to conduct effective outreach. Results Of approximately 88 WIC-eligible vendors, 38 agreed to accept vouchers. Ten of 125 vendors installed an EBT terminal, and 6 markets installed a central market terminal. The number of market stalls accepting SNAP increased from 80 to 143, an increase of 79%. Participating vendors wanted to provide access to SNAP and WIC shoppers, although redemption rates were low. Some WIC staff members were unfamiliar with markets, which hindered outreach. Conclusion Vendors and markets value low-income shoppers and, when offered support, will take on some inconvenience to serve them. To improve participation and sustainability, we recommend ongoing subsidies and streamlined procedures better suited to meet markets’ capabilities. Low EBT redemption rates at farmers markets suggest a need for more outreach to low-income shoppers and relationship building with WIC staff. PMID:24135392

Comparison of implant-abutment interface misfits after casting and soldering procedures.

PubMed

Neves, Flávio Domingues das; Elias, Gisele Araújo; da Silva-Neto, João Paulo; de Medeiros Dantas, Lucas Costa; da Mota, Adérito Soares; Neto, Alfredo Júlio Fernandes

2014-04-01

The aim of this study was to compare vertical and horizontal adjustments of castable abutments after conducting casting and soldering procedures. Twelve external hexagonal implants (3.75 × 10 mm) and their UCLA abutments were divided according their manufacturer and abutment type: PUN (plastic UCLA, Neodent), PUC (plastic UCLA, Conexão), PU3i (plastic UCLA, Biomet 3i), and PUTN (plastic UCLA with Tilite milled base, Neodent). Three infrastructures of a fixed partial implant-supported bridge with 3 elements were produced for each group. The measurements of vertical (VM) and horizontal (HM) misfits were obtained via scanning electron microscopy after completion of casting and soldering. The corresponding values were determined to be biomechanically acceptable to the system, and the results were rated as a percentage. Statistical analysis establishes differences between groups by chi-square after procedures, and McNeman's test was applied to analyze the influence of soldering over casting (α ≤ .05). For the values of VM and HM, respectively, when the casting process was complete, it was observed that 83.25% and 100% (PUTN), 33.3% and 27.75% (PUN), 33.3% and 88.8% (PUC), 33.3% and 94.35% (PU3i) represented acceptable values. After completing the requisite soldering, acceptable values were 50% and 94.35% (PUTN), 16.6% and 77.7% (PUN), 38.55% and 77.7% (PUC), and 27.75% and 94.35% (PU3i). Within the limitations of this study, it can be concluded that the premachined abutments presented more acceptable VM values. The HM values were within acceptable limits before and after the soldering procedure for most groups. Further, the soldering procedure resulted in an increase of VM in all groups.

Development and testing of the Junkeeper Control Corporation integrated programmable electronic controller and hydronics package

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1979-01-01

Additional developmental work on the existing programmable electronic controller and hydronic package for use with solar heating and cooling systems is summarized. The controller/hydronics subsystems passed all acceptance tests and performance criteria. The subsystems were shown marketable for public use.

75 FR 79438 - Notice of Request for the Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... Administration (FTA), DOT. ACTION: Notice of Request for Comments. SUMMARY: In accordance with the Paperwork... of Transportation's (DOT's) electronic docket is no longer accepting electronic comments.) All... users, without change, to http://www.regulations.gov . You may review DOT's complete Privacy Act...

30 CFR 870.16 - Acceptable payment methods.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for one or more mines, you must: (1) Use an electronic fund transfer mechanism approved by the U.S... one or more mines, you may: (1) Forward payments by electronic transfer in accordance with the... of Surface Mining Reclamation and Enforcement, P.O. Box 360095M, Pittsburgh, Pennsylvania 15251. (c...

Electronic Travel Aids for Blind Persons.

ERIC Educational Resources Information Center

Hill, Everett W.; Bradfield, Anna L.

1987-01-01

The article describes four of the most widely accepted and utilized Electronic Travel Aids for blind persons--the Lindsay Russell Pathsounder, the Mowat Sensor, the Sonicguide, and the C-5 Laser Cane. Current uses and applications of the four aids for specific populations of visually impaired persons are discussed. (Author)

Health care and privacy law in electronic commerce.

PubMed

Wright, B

1994-01-01

As electronic data interchange (EDI) continues to gain acceptance and use, questions regarding protection of the confidentiality of private healthcare information have arisen. This article explains how a computer-based information system equipped with appropriate safeguards can be far better at ensuring privacy than a paper-based system.

17 CFR 38.552 - Elements of an acceptable audit trail program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of the order shall also be captured. (b) Transaction history database. A designated contract market's audit trail program must include an electronic transaction history database. An adequate transaction history database includes a history of all trades executed via open outcry or via entry into an electronic...

17 CFR 38.552 - Elements of an acceptable audit trail program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of the order shall also be captured. (b) Transaction history database. A designated contract market's audit trail program must include an electronic transaction history database. An adequate transaction history database includes a history of all trades executed via open outcry or via entry into an electronic...

38 CFR 36.4333 - Maintenance of records.

Code of Federal Regulations, 2012 CFR

2012-07-01

... electronic form; i.e., an image of the original document in .jpg, .gif, .pdf, or a similar widely accepted... (CONTINUED) LOAN GUARANTY Guaranty or Insurance of Loans to Veterans With Electronic Reporting § 36.4333... factors affecting the obligor's credit worthiness, work sheets, and other documents supporting the holder...

38 CFR 36.4333 - Maintenance of records.

Code of Federal Regulations, 2011 CFR

2011-07-01

... electronic form; i.e., an image of the original document in .jpg, .gif, .pdf, or a similar widely accepted... (CONTINUED) LOAN GUARANTY Guaranty or Insurance of Loans to Veterans With Electronic Reporting § 36.4333... factors affecting the obligor's credit worthiness, work sheets, and other documents supporting the holder...

38 CFR 36.4333 - Maintenance of records.

Code of Federal Regulations, 2014 CFR

2014-07-01

... electronic form; i.e., an image of the original document in .jpg, .gif, .pdf, or a similar widely accepted... (CONTINUED) LOAN GUARANTY Guaranty or Insurance of Loans to Veterans With Electronic Reporting § 36.4333... factors affecting the obligor's credit worthiness, work sheets, and other documents supporting the holder...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mieno, H.; Kabe, R.; Allendorf, M. D.

Here, the first metal–organic framework exhibiting thermally activated delayed fluorescence (TADF) was developed. The zirconium-based framework (UiO-68-dpa) uses a newly designed linker composed of a terphenyl backbone, an electron-accepting carboxyl group, and an electron-donating diphenylamine and exhibits green TADF emission with a photoluminescence quantum yield of 30% and high thermal stability.

78 FR 53772 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0519... Veterinary Medicine Using the Food and Drug Administration Electronic Submission Gateway AGENCY: Food and... Center for Veterinary Medicine (CVM) accepts certain types of submissions electronically with no...

Two-screen single-shot electron spectrometer for laser wakefield accelerated electron beams.

PubMed

Soloviev, A A; Starodubtsev, M V; Burdonov, K F; Kostyukov, I Yu; Nerush, E N; Shaykin, A A; Khazanov, E A

2011-04-01

The laser wakefield acceleration electron beams can essentially deviate from the axis of the system, which distinguishes them greatly from beams of conventional accelerators. In case of energy measurements by means of a permanent-magnet electron spectrometer, the deviation angle can affect accuracy, especially for high energies. A two-screen single-shot electron spectrometer that correctly allows for variations of the angle of entry is considered. The spectrometer design enables enhancing accuracy of measuring narrow electron beams significantly as compared to a one-screen spectrometer with analogous magnetic field, size, and angular acceptance. © 2011 American Institute of Physics

Acceptor Percolation Determines How Electron-Accepting Additives Modify Transport of Ambipolar Polymer Organic Field-Effect Transistors.

PubMed

Ford, Michael J; Wang, Ming; Bustillo, Karen C; Yuan, Jianyu; Nguyen, Thuc-Quyen; Bazan, Guillermo C

2018-06-18

Organic field-effect transistors (OFETs) that utilize ambipolar polymer semiconductors can benefit from the ability of both electron and hole conduction, which is necessary for complementary circuits. However, simultaneous hole and electron transport in organic field-effect transistors result in poor ON/OFF ratios, limiting potential applications. Solution processing methods have been developed to control charge transport properties and transform ambipolar conduction to hole-only conduction. The electron-acceptor phenyl-C61-butyric acid methyl ester (PC 61 BM), when mixed in solution with an ambipolar semiconducting polymer, can reduce electron conduction. Unipolar p-type OFETs with high, well-defined ON/OFF ratios and without detrimental effects on hole conduction are achieved for a wide range of blend compositions, from 95:5 to 5:95 wt % semiconductor polymer:PC 61 BM. When introducing the alternative acceptor N, N'-bis(1-ethylpropyl)-3,4:9,10-perylenediimide (PDI), high ON/OFF ratios are achieved for 95:5 wt % semiconductor polymer:PDI; however, electron conduction increases for 50:50 and 5:95 wt % semiconductor polymer:PDI. As described within, we show that electron conduction is practically eliminated when additive domains do not percolate across the OFET channel, that is, electrons are "morphologically trapped". Morphologies were characterized by optical, electron, and atomic force microscopy as well as X-ray scattering techniques. PC 61 BM was substituted with an endohedral Lu 3 N fullerene, which enhanced contrast in electron microscopy and allowed for more detailed insight into the blend morphologies. Blends with alternative, nonfullerene acceptors further emphasize the importance of morphology and acceptor percolation, providing insights for such blends that control ambipolar transport and ON/OFF ratios.

Research and development of smart wearable health applications: the challenge ahead.

PubMed

Lymberis, Andreas

2004-01-01

Continuous monitoring of physiological and physical parameters is necessary for the assessment and management of personal health status. It can significantly contribute to the reduction of healthcare cost by avoiding unnecessary hospitalisations and ensuring that those who need urgent care get it sooner. In conjunction with cost-effective telemedicine platforms, ubiquitous health monitoring can significantly contribute to the enhancement of disease prevention and early diagnosis, disease management, treatment and home rehabilitation. Latest developments in the area of micro and nanotechnologies, information processing and wireless communication offer, today, the possibility for minimally (or non) invasive biomedical measurement but also wearable sensing, processing and data communication. Although the systems are being developed to satisfy specific user needs, a number of common critical issues have to be tackled to achieve reliable and acceptable smart health wearable applications e.g. biomedical sensors, user interface, clinical validation, data security and confidentiality, scenarios of use, decision support, user acceptance and business models. Major technological achievements have been realised the last few years. Cutting edge development combining functional clothing and integrated electronics open a new research area and possibilities for body sensing and communicating health parameters. This paper reviews the current status of research and development on smart wearable health systems and applications and discusses the outstanding issues and future challenges.

Sheath effects on current collection by particle detectors with narrow acceptance angles

NASA Technical Reports Server (NTRS)

Singh, N.; Baugher, C. R.

1981-01-01

Restriction of the aperture acceptance angle of an ion or electron trap on an attracting spacecraft significantly alters the volt-ampere characteristics of the instrument in a low Mach number plasma. It is shown when the angular acceptance of the aperture is restricted the current to the collector tends to be independent of the Debye length. Expressions for the RPA characteristics for both a thin sheath and a thick sheath are derived; and it is shown that as the aperture is narrowed the curves tend toward equivalence.

75 FR 352 - FFP Qualified Hydro 18 LLC; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

... Hydro 18 LLC; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments... Hydro 18 LLC filed an application for a preliminary permit, pursuant to section 4(f) of the Federal... electronically via the Internet. See 18 CFR 385.2001(a)(1)(iii) and the instructions on the Commission's Web site...

Finite Forward Acceptance Angles for Single Electron Capture by ^3He^2+ Ions in He and H_2

NASA Astrophysics Data System (ADS)

Mawhorter, Rj; Greenwood, J.; Smith; Chutjian, A.

2004-05-01

Perhaps surprisingly, electron capture scattering angles of a few degrees or more are observed for slow ions impacting light targets. Gas cells must be designed with this in mind. Indeed the difference between small acceptance angle results(W.L. Nutt, et al., J. Phys. B 8), 1457 (1978) and the larger acceptance-angle studies of both Kusakabe, et al.(T. Kusakabe, et al., J. Phys. Soc. Japan 59), 1218 (1990) and our group at JPL (presented here; energy range 0.33-4.67 keV/amu) for ^3He^2+ in H2 can be ascribed to this effect. Olson and Kimura(R. E. Olson and M. Kimura, J. Phys. B 15), 4231 (1982) have modeled the problem theoretically. We use existing differential cross section data(D. Bordenave-Montesquieu and R. Dagnac, J. Phys. B 27), 543 1994) for both H_2/ D2 and ^4He targets to calculate realistic acceptance angles. The resulting small total cross section corrections provide reliable absolute results for these benchmark systems. This work was carried out at JPL/Caltech, and was supported through agreement with NASA.

Annotations for the Collaboration of the Health Professionals

PubMed Central

Bringay, Sandra; Barry, Catherine; Charlet, Jean

2006-01-01

In the French DocPatient project, we work on documentary functionalities to improve the use of the electronic medical record. We suggest that integration of specific uses for paper medical documents in the design of the electronic medical record will improve its utility, use and acceptance. We propose in this paper to add a functionality of annotations in the electronic medical record to reinforce collaboration, coordination and awareness. PMID:17238309

Investigation of interaction femtosecond laser pulses with skin and eyes mathematical model

NASA Astrophysics Data System (ADS)

Rogov, P. U.; Smirnov, S. V.; Semenova, V. A.; Melnik, M. V.; Bespalov, V. G.

2016-08-01

We present a mathematical model of linear and nonlinear processes that takes place under the action of femtosecond laser radiation on the cutaneous covering. The study is carried out and the analytical solution of the set of equations describing the dynamics of the electron and atomic subsystems and investigated the processes of linear and nonlinear interaction of femtosecond laser pulses in the vitreous of the human eye, revealed the dependence of the pulse duration on the retina of the duration of the input pulse and found the value of the radiation power density, in which there is a self-focusing is obtained. The results of the work can be used to determine the maximum acceptable energy, generated by femtosecond laser systems, and to develop Russian laser safety standards for femtosecond laser systems.

Redox-capacitor to connect electrochemistry to redox-biology.

PubMed

Kim, Eunkyoung; Leverage, W Taylor; Liu, Yi; White, Ian M; Bentley, William E; Payne, Gregory F

2014-01-07

It is well-established that redox-reactions are integral to biology for energy harvesting (oxidative phosphorylation), immune defense (oxidative burst) and drug metabolism (phase I reactions), yet there is emerging evidence that redox may play broader roles in biology (e.g., redox signaling). A critical challenge is the need for tools that can probe biologically-relevant redox interactions simply, rapidly and without the need for a comprehensive suite of analytical methods. We propose that electrochemistry may provide such a tool. In this tutorial review, we describe recent studies with a redox-capacitor film that can serve as a bio-electrode interface that can accept, store and donate electrons from mediators commonly used in electrochemistry and also in biology. Specifically, we (i) describe the fabrication of this redox-capacitor from catechols and the polysaccharide chitosan, (ii) discuss the mechanistic basis for electron exchange, (iii) illustrate the properties of this redox-capacitor and its capabilities for promoting redox-communication between biology and electrodes, and (iv) suggest the potential for enlisting signal processing strategies to "extract" redox information. We believe these initial studies indicate broad possibilities for enlisting electrochemistry and signal processing to acquire "systems level" redox information from biology.

Superstructure ZrV2O7 nanofibres: thermal expansion, electronic and lithium storage properties.

PubMed

Li, Qidong; Zhao, Yanming; Kuang, Quan; Fan, Qinghua; Dong, Youzhong; Liu, Xudong

2016-11-30

ZrV 2 O 7 has attracted much attention as a negative thermal expansion (NTE) material due to its isotropic negative structure. However, rarely has investigation of the lithium storage behaviors been carried out except our first report on it. Meanwhile, the electrochemical behaviors and energy storage characteristics have not been studied in depth and will be explored in this article. Herein, we report on the synthesis, characterization and lithium intercalation mechanism of superstructure ZrV 2 O 7 nanofibres that were prepared through a facile solution-based method with a subsequent annealing process. The thermal in situ XRD technique combined with the Rietveld refinement method is adopted to analyze the change in the temperature-dependent crystal structure. Benefiting from the nanostructured morphology and relatively high electronic conductivity, it presents acceptable cyclic stability and rate capability. According to the operando evolution of the XRD patterns obtained from electrochemical in situ measurements, the Li intercalation mechanism of the solid solution process with a subsequent conversion reaction can be concluded. Finally, the amorphous state of the electrodes after the initial fully discharged state can effectively enhance the electrochemical performances.

First Exclusive Measurement of Deeply Virtual Compton Scattering off He 4 : Toward the 3D Tomography of Nuclei

DOE PAGES

Hattawy, M.; Baltzell, N. A.; Dupré, R.; ...

2017-11-15

Here, we report on the first measurement of the beam-spin asymmetry in the exclusive process of coherent deeply virtual Compton scattering off a nucleus. The experiment used the 6 GeV electron beam from the CEBAF accelerator at Jefferson Lab incident on a pressurizedmore » $^4$He gaseous target placed in front of the CEBAF Large Acceptance Spectrometer (CLAS). The scattered electron was detected by CLAS and the photon by a dedicated electromagnetic calorimeter at forward angles. To ensure the exclusivity of the process, a specially designed radial time projection chamber was used to detect the recoiling $^4$He nuclei. We measured beam-spin asymmetries larger than those observed on the free proton in the same kinematic domain. From these, we were able to extract, in a model-independent way, the real and imaginary parts of the only $^4$He Compton form factor, $$\\cal H_A$$. This first measurement of coherent deeply virtual Compton scattering on the $^4$He nucleus, with a fully exclusive final state via nuclear recoil tagging, leads the way toward 3D imaging of the partonic structure of nuclei.« less

Identification of food spoilage in the smart home based on neural and fuzzy processing of odour sensor responses.

PubMed

Green, Geoffrey C; Chan, Adrian D C; Goubran, Rafik A

2009-01-01

Adopting the use of real-time odour monitoring in the smart home has the potential to alert the occupant of unsafe or unsanitary conditions. In this paper, we measured (with a commercial metal-oxide sensor-based electronic nose) the odours of five household foods that had been left out at room temperature for a week to spoil. A multilayer perceptron (MLP) neural network was trained to recognize the age of the samples (a quantity related to the degree of spoilage). For four of these foods, median correlation coefficients (between target values and MLP outputs) of R > 0.97 were observed. Fuzzy C-means clustering (FCM) was applied to the evolving odour patterns of spoiling milk, which had been sampled more frequently (4h intervals for 7 days). The FCM results showed that both the freshest and oldest milk samples had a high degree of membership in "fresh" and "spoiled" clusters, respectively. In the future, as advancements in electronic nose development remove the present barriers to acceptance, signal processing methods like those explored in this paper can be incorporated into odour monitoring systems used in the smart home.

Electron Transport Coefficients and Effective Ionization Coefficients in SF6-O2 and SF6-Air Mixtures Using Boltzmann Analysis

NASA Astrophysics Data System (ADS)

Wei, Linsheng; Xu, Min; Yuan, Dingkun; Zhang, Yafang; Hu, Zhaoji; Tan, Zhihong

2014-10-01

The electron drift velocity, electron energy distribution function (EEDF), density-normalized effective ionization coefficient and density-normalized longitudinal diffusion velocity are calculated in SF6-O2 and SF6-Air mixtures. The experimental results from a pulsed Townsend discharge are plotted for comparison with the numerical results. The reduced field strength varies from 40 Td to 500 Td (1 Townsend=10-17 V·cm2) and the SF6 concentration ranges from 10% to 100%. A Boltzmann equation associated with the two-term spherical harmonic expansion approximation is utilized to gain the swarm parameters in steady-state Townsend. Results show that the accuracy of the Boltzmann solution with a two-term expansion in calculating the electron drift velocity, electron energy distribution function, and density-normalized effective ionization coefficient is acceptable. The effective ionization coefficient presents a distinct relationship with the SF6 content in the mixtures. Moreover, the E/Ncr values in SF6-Air mixtures are higher than those in SF6-O2 mixtures and the calculated value E/Ncr in SF6-O2 and SF6-Air mixtures is lower than the measured value in SF6-N2. Parametric studies conducted on these parameters using the Boltzmann analysis offer substantial insight into the plasma physics, as well as a basis to explore the ozone generation process.

Multi-discipline Waste Acceptance Process at the Nevada National Security Site - 13573

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carilli, Jhon T.; Krenzien, Susan K.

2013-07-01

The Nevada National Security Site low-level radioactive waste disposal facility acceptance process requires multiple disciplines to ensure the protection of workers, the public, and the environment. These disciplines, which include waste acceptance, nuclear criticality, safety, permitting, operations, and performance assessment, combine into the overall waste acceptance process to assess low-level radioactive waste streams for disposal at the Area 5 Radioactive Waste Management Site. Four waste streams recently highlighted the integration of these disciplines: the Oak Ridge Radioisotope Thermoelectric Generators and Consolidated Edison Uranium Solidification Project material, West Valley Melter, and classified waste. (authors)

A Boundary Scan Test Vehicle for Direct Chip Attach Testing

NASA Technical Reports Server (NTRS)

Parsons, Heather A.; DAgostino, Saverio; Arakaki, Genji

2000-01-01

To facilitate the new faster, better and cheaper spacecraft designs, smaller more mass efficient avionics and instruments are using higher density electronic packaging technologies such as direct chip attach (DCA). For space flight applications, these technologies need to have demonstrated reliability and reasonably well defined fabrication and assembly processes before they will be accepted as baseline designs in new missions. As electronics shrink in size, not only can repair be more difficult, but 49 probing" circuitry can be very risky and it becomes increasingly more difficult to identify the specific source of a problem. To test and monitor these new technologies, the Direct Chip Attach Task, under NASA's Electronic Parts and Packaging Program (NEPP), chose the test methodology of boundary scan testing. The boundary scan methodology was developed for interconnect integrity and functional testing at hard to access electrical nodes. With boundary scan testing, active devices are used and failures can be identified to the specific device and lead. This technology permits the incorporation of "built in test" into almost any circuit and thus gives detailed test access to the highly integrated electronic assemblies. This presentation will describe boundary scan, discuss the development of the boundary scan test vehicle for DCA and current plans for testing of direct chip attach configurations.

Charge transport in organic multi-layer devices under electric and optical fields

NASA Astrophysics Data System (ADS)

Park, June Hyoung

2007-12-01

Charge transport in small organic molecules and conjugated conducting polymers under electric or optical fields is studied by using field effect transistors and photo-voltaic cells with multiple thin layers. With these devices, current under electric field, photo-current under optical field, and luminescence of optical materials are measured to characterize organic and polymeric materials. For electric transport studies, poly(3,4-ethylenedioxythiophene) doped by polystyrenesulfonic acid is used, which is conductive with conductivity of approximately 25 S/cm. Despite their high conductance, field effect transistors based on the films are successfully built and characterized by monitoring modulations of drain current by gate voltage and IV characteristic curves. Due to very thin insulating layers of poly(vinylphenol), the transistors are relative fast under small gate voltage variation although heavy ions are involved in charge transport. In IV characteristic curves, saturation effects can be observed. Analysis using conventional field effect transistor model indicates high mobility of charge carriers, 10 cm2/V·sec, which is not consistent with the mobility of the conducting polymer. It is proposed that the effect of a small density of ions injected via polymer dielectric upon application of gate voltage and the ion compensation of key hopping sites accounts for the operation of the field effect transistors. For the studies of transport under optical field, photovoltaic cells with 3 different dendrons, which are efficient to harvest photo-excited electrons, are used. These dendrons consist of two electron-donors (tetraphenylporphyrin) and one electron-accepter (naphthalenediimide). Steady-state fluorescence measurements show that inter-molecular interaction is dominant in solid dendron film, although intra-molecular interaction is still present. Intra-molecular interaction is suggested by different fluorescence lifetimes between solutions of donor and dendrons. This intra-molecular interaction has two processes, transport via pi-stackings and transport via linking functional groups in the dendrons. IV characteristic spectra of the photovoltaic cells suggest that the transport route of photo-excited charges depends on wavelength of incident light on the cells. For excitation by the Soret band and the lowest Q band, a photo-excited electron can transport directly to a neighbor dendron. For excitation by high-energy Q bands, a photo-excited electron transports via the electron-accepters.

Pb-free electronics: from nanotechnology to combinatorial materials science

NASA Astrophysics Data System (ADS)

Diaz Gonzalez, Alfredo J.

The elimination of lead (Pb) from the electronics industry due to a government directive caused problems on the manufacturing and use of electronic components. The current alloys used to attach components have a significant higher processing temperature (~30-40°C) that those containing Pb. The higher processing temperatures cause damage to the electronic components; printed circuit boards (PCB) and represents an increase in energetic costs for the manufacurer. Tin whiskers are out-of-plane structures that grow from tin (Sn) plated surfaces and cause short circuits and metal vapor arc. The electrical connection of components to the PCB relies on leads that are close to each other and are manufactured from tin-plated copper. Materials have shown a tendency to modify their bulk properties depending on powder particle size. Nanoparticle's coalescence temperature tends to decrease as particle size decreases. Exploiting this behavior, a nanoparticle based solder paste has been developed for attaching electronic components at a lower processing temperature to avoid thermally induced damage and reduce energy consumption. Tin nanoparticles were successfully synthesized via a wet chemistry route using tin (II) chloride dihydrated (metal precursor), 1,10-Phenanthroline (surfactant), and sodium borohydride (reducing agent). A flux system was developed based on Ethylene Glycol. Results showed acceptable coalescence of the non-capped nanoparticles at temperatures as low as 200°C with a processing time of 20 minutes. Synthesized nanoparticles with capping agent required higher flux content thus resulting in a poor metallic load paste. A reduction in processing temperature of approximately 40°C have been found when comparing the developed solder paste with typical SAC lead-free solders (~240°C). The electrical behavior was found to be an order of magnitude below that of bulk tin. Compositional libraries have been developed in an attempt to screen, via a high through-put method, alloys that are prone to tin whiskers growth. These libraries are samples containing a range of sub-samples with varying compositions within it than can be processed simultaneously. Using sputtering, a physical vapor deposition technique, a gradient composed of Ag-Cu was deposited over a Sn-plated Cu substrate. After reflow, the growth mechanism of the whiskers was accelerated using the IEC60068-82-2 standard. SEM and EDS analysis was used to charac-terize the growth of the tin whiskers at different elemental compositions. The gradients found across the samples are in accordance with the theoretical geometrical spacing. Tin whiskers were found on control samples, whereas almost all elemental compositions showed mitigation or elimination of the whiskers. This combinatorial material science methodology proved to be an efficient and fast screening method for the plating materials selection process in Pb-free electronics.

49 CFR 172.201 - Preparation and retention of shipping papers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... basic description required by § 172.202(a). (5) Electronic shipping papers. For transportation by rail... the shipping paper required by § 172.200(a), or an electronic image thereof, that is accessible at or... hazardous waste, the shipping paper copy must be retained for three years after the material is accepted by...

Guidelines for Acceptable Electronic Communication with Students

ERIC Educational Resources Information Center

Todoric, Mary E.

2011-01-01

Rarely does a day go by when one doesn't hear or read something relating to digital communication and school. Whether it's referencing cell phones, email, Facebook, texting, blogs, or Twitter, this constant barrage of messages in the media makes it clear that electronic communications are in the forefront of students' lives. They are also an…

12 CFR 205.12 - Relation to other laws.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Relation to other laws. 205.12 Section 205.12 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ELECTRONIC...) The Electronic Fund Transfer Act and this part govern— (i) The addition to an accepted credit card as...

41 CFR 101-42.1102-6 - Noncertified and certified electronic products.

Code of Federal Regulations, 2013 CFR

2013-07-01

... radiation test to determine the acceptability for use and/or modification to bring it into compliance with..., noncertified black and white television receivers, and noncertified microwave ovens. (2) Donation of electronic... it: (A) Is aware of the potential danger in using the product without a radiation test to determine...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and General Hearing Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., and General Hearing Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

77 FR 61443 - Acceptance of Application for Special Nuclear Materials License From Rensselaer Polytechnic...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... determination by the presiding officer that the filing demonstrates good cause by satisfying the following three... on electronic storage media. Participants may not submit paper copies of their filings unless they.... Participants who believe that they have a good cause for not submitting documents electronically must file an...

Fellows' Perceptions of a Mandatory Reflective Electronic Portfolio in a Geriatric Medicine Fellowship Program

ERIC Educational Resources Information Center

Ruiz, Jorge G.; Qadri, Syeda S.; Karides, Marina; Castillo, Carmen; Milanez, Marcos; Roos, Bernard A.

2009-01-01

Electronic portfolios (ePortfolios) can be useful for evaluating and documenting mastery of competencies. We investigated geriatric medicine fellows' perceptions of an ePortfolio. We conducted surveys and focus groups followed by quantitative and qualitative data analysis. Our study revealed that fellows considered the ePortfolio acceptable and…

36 CFR 1235.50 - What specifications and standards for transfer apply to electronic records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... electronic records in a format that is independent of specific hardware or software. Except as specified in... a request from NARA to provide the software to decompress the records. (3) Agencies interested in... organization. Acceptable transfer formats include the Geography Markup Language (GML) as defined by the Open...

78 FR 78353 - Hydro Green Energy, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... concrete tetrapods; and (10) a new single- circuit 230-kilovolt transmission line approximately 9 miles in... encourages electronic filing. Please file comments, motions to intervene, notices of intent, and [email protected] , (866) 208-3676 (toll free), or (202) 502- 8659 (TTY). In lieu of electronic filing...

Design, Synthesis, Structural and Spectroscopic Studies of Push-Pull Two-Photon Absorbing Chromophores with Acceptor Groups of Varying Strength

PubMed Central

Morales, Alma R.; Frazer, Andrew; Woodward, Adam W.; Ahn-White, Hyo-Yang; Fonari, Alexandr; Tongwa, Paul; Timofeeva, Tatiana; Belfield, Kevin D.

2013-01-01

A new series of unsymmetrical diphenylaminofluorene-based chromophores with various strong π-electron acceptors were synthesized and fully characterized. The systematic alteration of the structural design facilitated the investigation of effects such as molecular symmetry and strength of electron-donating and/or withdrawing termini have on optical nonlinearity. In order to determine the electronic and geometrical properties of the novel compounds, a thorough investigation was carried out by a combination of linear and nonlinear spectroscopic techniques, single crystal X-ray diffraction, and quantum chemical calculations. Finally, on the basis of two-photon absorption (2PA) cross sections, the general trend for π -electron accepting ability, i.e., ability to accept charge transfer from diphenylamine was: 2-pyran-4-ylidene malononitrile (pyranone) > dicyanovinyl > bis(dicyanomethylidene)indane > 1-(thiophen-2-yl)propenone > dicyanoethylenyl > 3-(thiophen-2-yl)propenone. An analog with the 2-pyran-4-ylidene malononitrile acceptor group exhibited a nearly three-fold enhancement of the 2PA< δ (1650 GM at 840 nm), relative to other members of the series. PMID:23305555

Application of the π-accepting ability parameter of N-heterocyclic carbene ligands in iridium complexes for signal amplification by reversible exchange (SABRE).

PubMed

van Weerdenburg, Bram J A; Eshuis, Nan; Tessari, Marco; Rutjes, Floris P J T; Feiters, Martin C

2015-09-21

The new π-accepting ability parameter (PAAP) appears to be the best tool to analyse the electronic properties of NHC ligands in [Ir(H)2(NHC)(Py)3](+) complexes for SABRE. Together with the buried volume, the efficiency of hyperpolarisation transfer in SABRE, depending on the exchange rate of pyridine, can be described.

Exploring critical factors influencing physicians' acceptance of mobile electronic medical records based on the dual-factor model: a validation in Taiwan.

PubMed

Liu, Chung-Feng; Cheng, Tain-Junn

2015-02-07

With respect to information management, most of the previous studies on the acceptance of healthcare information technologies were analyzed from "positive" perspectives. However, such acceptance is always influenced by both positive and negative factors and it is necessary to validate both in order to get a complete understanding. This study aims to explore physicians' acceptance of mobile electronic medical records based on the dual-factor model, which is comprised of inhibitors and enablers, to explain an individual's technology usage. Following an earlier healthcare study in the USA, the researchers conducted a similar survey for an Eastern country (Taiwan) to validate whether perceived threat to professional autonomy acts as a critical inhibitor. In addition, perceived mobility, which is regarded as a critical feature of mobile services, was also evaluated as a common antecedent variable in the model. Physicians from three branch hospitals of a medical group were invited to participate and complete questionnaires. Partial least squares, a structural equation modeling technique, was used to evaluate the proposed model for explanatory power and hypotheses testing. 158 valid questionnaires were collected, yielding a response rate of 33.40%. As expected, the inhibitor of perceived threat has a significant impact on the physicians' perceptions of usefulness as well as their intention to use. The enablers of perceived ease of use and perceived usefulness were also significant. In addition, as expected, perceived mobility was confirmed to have a significant impact on perceived ease of use, perceived usefulness and perceived threat. It was confirmed that the dual-factor model is a comprehensive method for exploring the acceptance of healthcare information technologies, both in Western and Eastern countries. Furthermore, perceived mobility was proven to be an effective antecedent variable in the model. The researchers believe that the results of this study will contribute to the research on the acceptance of healthcare information technologies, particularly with regards to mobile electronic medical records, based on the dual-factor viewpoints of academia and practice.

Development and Evaluation of e-CA, an Electronic Mobile-Based Food Record

PubMed Central

Bucher Della Torre, Sophie; Carrard, Isabelle; Farina, Eddy; Danuser, Brigitta; Kruseman, Maaike

2017-01-01

Measures that capture diet as validly and reliably as possible are cornerstones of nutritional research, and mobile-based devices offer new opportunities to improve and simplify data collection. The balance between precision and acceptability of these data collection tools remains debated, and rigorous validations are warranted. Our objective was to develop and evaluate an electronic mobile-based food record for a research setting. We developed e-CA, which includes almost 900 foods and beverages classified in 14 categories and 60 subcategories. e-CA was evaluated using three different methods: (1) usability and acceptability through a logbook and qualitative interviews; (2) dietary intake accuracy through comparison with 2 unannounced 24-h phone recalls on overlapping days; and (3) reliability and process comparison with a paper-based food record in a laboratory setting with a randomized design. e-CA proved to be intuitive and practical and was perceived as modern, trendy, and fun. Comparisons of e-CA with 24-h telephone recalls or paper-based food records in a laboratory setting with two small convenient samples showed good agreement but highlighted the well-known difficulty of estimating portion sizes and a necessary learning time to use the app. e-CA is a functional tool that has the potential to facilitate food intake measurement for research by increasing the pleasure of using the food record tool and reducing the perceived burden for the participants. It also decreases the workload, costs and the risk of transcription errors for researchers. PMID:28106767

Development and Evaluation of e-CA, an Electronic Mobile-Based Food Record.

PubMed

Bucher Della Torre, Sophie; Carrard, Isabelle; Farina, Eddy; Danuser, Brigitta; Kruseman, Maaike

2017-01-18

Measures that capture diet as validly and reliably as possible are cornerstones of nutritional research, and mobile-based devices offer new opportunities to improve and simplify data collection. The balance between precision and acceptability of these data collection tools remains debated, and rigorous validations are warranted. Our objective was to develop and evaluate an electronic mobile-based food record for a research setting. We developed e-CA, which includes almost 900 foods and beverages classified in 14 categories and 60 subcategories. e-CA was evaluated using three different methods: (1) usability and acceptability through a logbook and qualitative interviews; (2) dietary intake accuracy through comparison with 2 unannounced 24-h phone recalls on overlapping days; and (3) reliability and process comparison with a paper-based food record in a laboratory setting with a randomized design. e-CA proved to be intuitive and practical and was perceived as modern, trendy, and fun. Comparisons of e-CA with 24-h telephone recalls or paper-based food records in a laboratory setting with two small convenient samples showed good agreement but highlighted the well-known difficulty of estimating portion sizes and a necessary learning time to use the app. e-CA is a functional tool that has the potential to facilitate food intake measurement for research by increasing the pleasure of using the food record tool and reducing the perceived burden for the participants. It also decreases the workload, costs and the risk of transcription errors for researchers.

Electron/proton spectrometer certification documentation analyses

NASA Technical Reports Server (NTRS)

Gleeson, P.

1972-01-01

A compilation of analyses generated during the development of the electron-proton spectrometer for the Skylab program is presented. The data documents the analyses required by the electron-proton spectrometer verification plan. The verification plan was generated to satisfy the ancillary hardware requirements of the Apollo Applications program. The certification of the spectrometer requires that various tests, inspections, and analyses be documented, approved, and accepted by reliability and quality control personnel of the spectrometer development program.

Real-time measurement and monitoring of absorbed dose for electron beams

NASA Astrophysics Data System (ADS)

Korenev, Sergey; Korenev, Ivan; Rumega, Stanislav; Grossman, Leon

2004-09-01

The real-time method and system for measurement and monitoring of absorbed dose for industrial and research electron accelerators is considered in the report. The system was created on the basis of beam parameters method. The main concept of this method consists in the measurement of dissipated kinetic energy of electrons in the irradiated product, determination of number of electrons and mass of irradiated product in the same cell by following calculation of absorbed dose in the cell. The manual and automation systems for dose measurements are described. The systems are acceptable for all types of electron accelerators.

Electron beam magnetic switch for a plurality of free electron lasers

DOEpatents

Schlitt, Leland G.

1984-01-01

Apparatus for forming and utilizing a sequence of electron beam segments, each of the same temporal length (substantially 15 nsec), with consecutive beams being separated by a constant time interval of the order of 3 nsec. The beam sequence is used for simultaneous inputs to a plurality of wiggler magnet systems that also accept the laser beams to be amplified by interaction with the co-propagating electron beams. The electron beams are arranged substantially in a circle to allow proper distribution of and simultaneous switching out of the beam segments to their respective wiggler magnets.

Racial and Ethnic Cultural Factors in the Process of Acceptance of Mental Illness

ERIC Educational Resources Information Center

Mizock, Lauren; Russinova, Zlatka

2013-01-01

Acceptance of mental illness is essential to promoting recovery and is uniquely impacted by issues of culture, race, and ethnicity. Qualitative case narrative methodology was used to identify themes related to the cultural facilitators and barriers in the acceptance process. Five participant narratives are presented to assist practitioners in…

Photo-excitation of electrons in cytochrome c oxidase as a theory of the mechanism of the increase of ATP production in mitochondria by laser therapy

NASA Astrophysics Data System (ADS)

Zielke, Andrzej

2014-02-01

The hypothesis explains the molecular basis for restoring mitochondrial function by laser therapy. It also explains how laser therapy reverses both excessive oxidation (lack of NADH/FADH2) and excessive reduction (lack of O2) states of cytochrome c oxidase complex. It is proposed that photons interact with heme molecules of cytochrome c oxidase. A molecule of heme contains a porphyrin ring and an atom of iron in the center. The iron atom (Fe) can switch oxidation states back and forth between ferrous (Fe2+) and ferric (Fe3+) by accepting or releasing an electron. The porphyrin ring is a complex aromatic molecule that has 26 pi electrons which are "delocalized", spinning in the carbon rings creating a resonating electromagnetic cloud. Photons with similar wavelengths are absorbed by the cloud increasing its energy. The energy is then passed on to the centrally located atom of iron existing in a reduced state (Fe2+). The electrons on the orbits of the iron atom accept this electromagnetic energy, and change orbitals to a higher energetic level. If the energy is sufficient, electrons leave the atom entirely. If this occurs, Fe2+ become oxidized to Fe3+ releasing electrons, thus restoring electron flow and the production of ATP. At the same time, electrons freed from complex IV may have sufficient energy to be picked by NAD+/FADH and re-enter the chain at the complex I or II amplifying the flow of electrons.

The Design of Integrated Information System for High Voltage Metering Lab

NASA Astrophysics Data System (ADS)

Ma, Yan; Yang, Yi; Xu, Guangke; Gu, Chao; Zou, Lida; Yang, Feng

2018-01-01

With the development of smart grid, intelligent and informatization management of high-voltage metering lab become increasingly urgent. In the paper we design an integrated information system, which automates the whole transactions from accepting instruments, make experiments, generating report, report signature to instrument claims. Through creating database for all the calibrated instruments, using two-dimensional code, integrating report templates in advance, establishing bookmarks and online transmission of electronical signatures, our manual procedures reduce largely. These techniques simplify the complex process of account management and report transmission. After more than a year of operation, our work efficiency improves about forty percent averagely, and its accuracy rate and data reliability are much higher as well.

Molecular mechanism and structure of Trigger Factor bound to the translating ribosome

PubMed Central

Merz, Frieder; Boehringer, Daniel; Schaffitzel, Christiane; Preissler, Steffen; Hoffmann, Anja; Maier, Timm; Rutkowska, Anna; Lozza, Jasmin; Ban, Nenad; Bukau, Bernd; Deuerling, Elke

2008-01-01

Ribosome-associated chaperone Trigger Factor (TF) initiates folding of newly synthesized proteins in bacteria. Here, we pinpoint by site-specific crosslinking the sequence of molecular interactions of Escherichia coli TF and nascent chains during translation. Furthermore, we provide the first full-length structure of TF associated with ribosome–nascent chain complexes by using cryo-electron microscopy. In its active state, TF arches over the ribosomal exit tunnel accepting nascent chains in a protective void. The growing nascent chain initially follows a predefined path through the entire interior of TF in an unfolded conformation, and even after folding into a domain it remains accommodated inside the protective cavity of ribosome-bound TF. The adaptability to accept nascent chains of different length and folding states may explain how TF is able to assist co-translational folding of all kinds of nascent polypeptides during ongoing synthesis. Moreover, we suggest a model of how TF's chaperoning function can be coordinated with the co-translational processing and membrane targeting of nascent polypeptides by other ribosome-associated factors. PMID:18497744

Development of the Parkland-UT Southwestern Colonoscopy Reporting System (CoRS) for evidence-based colon cancer surveillance recommendations

PubMed Central

Gupta, Samir; Halm, Ethan A; Wright, Shaun; McCallister, Katharine; Bishop, Wendy; Santini, Noel; Mayorga, Christian; Agrawal, Deepak; Moran, Brett; Sanders, Joanne M; Singal, Amit G

2016-01-01

Objective Through colonoscopy, polyps can be identified and removed to reduce colorectal cancer incidence and mortality. Appropriate use of surveillance colonoscopy, post polypectomy, is a focus of healthcare reform. Materials and Methods The authors developed and implemented the first electronic medical record–based colonoscopy reporting system (CoRS) that matches endoscopic findings with guideline-consistent surveillance recommendations and generates tailored results and recommendation letters for patients and providers. Results In its first year, CoRS was used in 98.6% of indicated cases. Via a survey, colonoscopists agreed/strongly agreed it is easy to use (83%), provides guideline-based recommendations (89%), improves quality of Spanish letters (94%), they would recommend it for other institutions (78%), and it made their work easier (61%), and led to improved practice (56%). Discussion CoRS’ widespread adoption and acceptance likely resulted from stakeholder engagement throughout the development and implementation process. Conclusion CoRS is well-accepted by clinicians and provides guideline-based recommendations and results communications to patients and providers. PMID:26254481

Molecules with enhanced electronic polarizabilities based on defect-like states in conjugated polymers

NASA Technical Reports Server (NTRS)

Beratan, David N. (Inventor)

1991-01-01

Highly conjugated organic polymers typically have large non-resonant electronic susceptibilities, which give the molecules unusual optical properties. To enhance these properties, defects are introduced into the polymer chain. Examples include light doping of the conjugated polymer and synthesis, conjugated polymers which incorporate either electron donating or accepting groups, and conjugated polymers which contain a photoexcitable species capable of reversibly transferring its electron to an acceptor. Such defects in the chain permit enhancement of the second hyperpolarizability by at least an order of magnitude.

Approaches for optimizing the first electronic hyperpolarizability of conjugated organic molecules

NASA Technical Reports Server (NTRS)

Marder, S. R.; Beratan, D. N.; Cheng, L.-T.

1991-01-01

Conjugated organic molecules with electron-donating and -accepting moieties can exhibit large electronic second-order nonlinearities, or first hyperpolarizabilities, beta. The present two-state, four-orbital independent-electron analysis of beta leads to the prediction that its absolute value will be maximized at a combination of donor and acceptor strengths for a given conjugated bridge. Molecular design strategies for beta optimization are proposed which give attention to the energetic manipulations of the bridge states. Experimental results have been obtained which support the validity of this approach.

Biological reduction of chlorinated solvents: Batch-scale geochemical modeling

NASA Astrophysics Data System (ADS)

Kouznetsova, Irina; Mao, Xiaomin; Robinson, Clare; Barry, D. A.; Gerhard, Jason I.; McCarty, Perry L.

2010-09-01

Simulation of biodegradation of chlorinated solvents in dense non-aqueous phase liquid (DNAPL) source zones requires a model that accounts for the complexity of processes involved and that is consistent with available laboratory studies. This paper describes such a comprehensive modeling framework that includes microbially mediated degradation processes, microbial population growth and decay, geochemical reactions, as well as interphase mass transfer processes such as DNAPL dissolution, gas formation and mineral precipitation/dissolution. All these processes can be in equilibrium or kinetically controlled. A batch modeling example was presented where the degradation of trichloroethene (TCE) and its byproducts and concomitant reactions (e.g., electron donor fermentation, sulfate reduction, pH buffering by calcite dissolution) were simulated. Local and global sensitivity analysis techniques were applied to delineate the dominant model parameters and processes. Sensitivity analysis indicated that accurate values for parameters related to dichloroethene (DCE) and vinyl chloride (VC) degradation (i.e., DCE and VC maximum utilization rates, yield due to DCE utilization, decay rate for DCE/VC dechlorinators) are important for prediction of the overall dechlorination time. These parameters influence the maximum growth rate of the DCE and VC dechlorinating microorganisms and, thus, the time required for a small initial population to reach a sufficient concentration to significantly affect the overall rate of dechlorination. Self-inhibition of chlorinated ethenes at high concentrations and natural buffering provided by the sediment were also shown to significantly influence the dechlorination time. Furthermore, the analysis indicated that the rates of the competing, nonchlorinated electron-accepting processes relative to the dechlorination kinetics also affect the overall dechlorination time. Results demonstrated that the model developed is a flexible research tool that is able to provide valuable insight into the fundamental processes and their complex interactions during bioremediation of chlorinated ethenes in DNAPL source zones.

Introduction: Towards Sustainable 2020 Nanoelectronics

NASA Astrophysics Data System (ADS)

Hoefflinger, Bernd

Faced with the immanent end of the nanometer roadmap at 10 nm, and with an electronics energy crisis, we have to engineer the largest strategy change in the 50-years history of microelectronics, renamed to nanoelectronics in 2000 with the first chips containing 100-nm transistors. Accepting the 10 nm-limit, the new strategy for the future growth of chip functionalities and markets has to deliver, within a decade, another 1,000× improvement in the energy per processing operation as well as in the energy per bit of memory and of communication. As a team from industry and from research, we present expectations, requirements and possible solutions for this challenging energy scenario of femto- and atto-Joule electronics. The introduction outlines the book's structure, which aims to describe the innovation eco-system needed for optimum-energy, sustainable nanoelectronics. For the benefit of the reader, chapters are grouped together into interest areas like transistors and circuits, technology, products and markets, radical innovations, as well as business and policy issues.

Effect of storage temperature on the activity of submitochondrial particles.

PubMed

Doherty, Francis G

2008-12-01

The submitochondrial particle (SMP) assay employs processed mammalian mitchondria to assess the toxicity of chemical contaminants in aqueous solutions. Particles and associated reagents are commercially available to support two individual procedures, the electron transfer (ETr) and reverse electron transfer (RET) assays. The objective of the present study was to assess the effect of storage temperature on SMP activity. One RET and one ETr assay were conducted with sodium dodecylsulfate on each of two vials of particles stored at -20 and -80 degrees C at periodic intervals over a six-month span. Results demonstrated that SMP could remain active in either assay through six months of storage at either temperature. However, there were isolated vials of particles stored at -20 degrees C that exhibited unacceptable reductions in activity for both the ETr and the RET assays that were not related to storage duration. These results were used to develop guidance in assessing the acceptability of particle activity in SMP assays.

The Rapid Integration and Test Environment: A Process for Achieving Software Test Acceptance

DTIC Science & Technology

2010-05-01

Test Environment : A Process for Achieving Software Test Acceptance 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...mlif`v= 365= k^s^i=mlpqdo^ar^qb=p`elli= The Rapid Integration and Test Environment : A Process for Achieving Software Test Acceptance Patrick V...was awarded the Bronze Star. Introduction The Rapid Integration and Test Environment (RITE) initiative, implemented by the Program Executive Office

Electronic Router

NASA Technical Reports Server (NTRS)

Crusan, Jason

2005-01-01

Electronic Router (E-Router) is an application program for routing documents among the cognizant individuals in a government agency or other organization. E-Router supplants a prior 14 NASA Tech Briefs, May 2005 system in which paper documents were routed physically in packages by use of paper slips, packages could be lost, routing times were unacceptably long, tracking of packages was difficult, and there was a need for much photocopying. E-Router enables a user to create a digital package to be routed. Input accepted by E-Router includes the title of the package, the person(s) to whom the package is to be routed, attached files, and comments to reviewers. Electronic mail is used to notify reviewers of needed actions. The creator of the package can, at any time, see the status of the package in the routing structure. At the end of the routing process, E-Router keeps a record of the package and of approvals and/or concurrences of the reviewers. There are commercial programs that perform the general functions of E-Router, but they are more complicated. E-Router is Web-based, easy to use, and does not require the installation or use of client software.

GEM detector performance and efficiency in Proton Charge Radius (PRad) Experiment

NASA Astrophysics Data System (ADS)

Bai, Xinzhan; PRad Collaboration

2017-09-01

The PRad experiment (E12-11-106) was performed in 2016 at Jefferson Lab in Hall B. It aims to investigate the proton charge radius puzzle through electron proton elastic scattering process. The experiment used a non-magnetic spectrometer method, and reached a very small ep scattering angle and thus an unprecedented small four-momentum transfer squared region, Q2 from 2 ×10-4 to 0.06(GeV / c) 2 . PRad experiment was designed to measure the proton charge radius within a sub-percent precision. Gas Electron Multiplier (GEM) detectors have contributed to reach the experimental goal. A pair of large area GEM detectors, and a large acceptance, high resolution calorimeter(HyCal) were utilized in the experiment to detect the scattered electrons. The precision requirements of the experiment demands a highly accurate understanding of efficiency and stability of GEM detectors. In this talk, we will present the preliminary results on the performance and efficiency of GEM detectors. This work is supported in part by NSF MRI award PHY-1229153, the U.S. Department of Energy under Contract No. DE-FG02-07ER41528, No. DE-FG02-03ER41240 and Thomas Jefferson National Laboratory.

[4 years of Microbiología SEM (1994-1997)].

PubMed

Mas-Castellà, J

1997-12-01

Different aspects of Microbiología SEM editorial process over the years 1994-1997 are analyzed: number of originals received, the process leading to their publication, rates of accepted and refused papers, time needed for each step of the editorial process--which comprises scientific, language editing, if needed--, as well as some characteristics that can define the patterns of the articles, such as number of authors, institutions where the authors work and mean number of references. The contents of the different sections (editorial, research and review articles, perspectives, opinion, books review) are commented on, as well as the role played by some of them as forums for the discussion of topics of current scientific interest, especially the editorials focusing on the state-of-the-art of microbiological research in Latin American countries. Characteristics and frequency of monographic issues are also presented. The information is complemented with data about the circulation and distribution of the journal, its inclusion in international indexes and its current electronic publication on the world wide web.

Using artificial intelligence to automate remittance processing.

PubMed

Adams, W T; Snow, G M; Helmick, P M

1998-06-01

The consolidated business office of the Allegheny Health Education Research Foundation (AHERF), a large integrated healthcare system based in Pittsburgh, Pennsylvania, sought to improve its cash-related business office activities by implementing an automated remittance processing system that uses artificial intelligence. The goal was to create a completely automated system whereby all monies it processed would be tracked, automatically posted, analyzed, monitored, controlled, and reconciled through a central database. Using a phased approach, the automated payment system has become the central repository for all of the remittances for seven of the hospitals in the AHERF system and has allowed for the complete integration of these hospitals' existing billing systems, document imaging system, and intranet, as well as the new automated payment posting, and electronic cash tracking and reconciling systems. For such new technology, which is designed to bring about major change, factors contributing to the project's success were adequate planning, clearly articulated objectives, marketing, end-user acceptance, and post-implementation plan revision.

Direct Metal Deposition of H13 Tool Steel on Copper Alloy Substrate: Parametric Investigation

NASA Astrophysics Data System (ADS)

Imran, M. Khalid; Masood, S. H.; Brandt, Milan

2015-12-01

Over the past decade, researchers have demonstrated interest in tribology and prototyping by the laser aided material deposition process. Laser aided direct metal deposition (DMD) enables the formation of a uniform clad by melting the powder to form desired component from metal powder materials. In this research H13 tool steel has been used to clad on a copper alloy substrate using DMD. The effects of laser parameters on the quality of DMD deposited clad have been investigated and acceptable processing parameters have been determined largely through trial-and-error approaches. The relationships between DMD process parameters and the product characteristics such as porosity, micro-cracks and microhardness have been analysed using scanning electron microscope (SEM), image analysis software (ImageJ) and microhardness tester. It has been found that DMD parameters such as laser power, powder mass flow rate, feed rate and focus size have an important role in clad quality and crack formation.

Student Perceptions of a Trial of Electronic Text Matching Software: A Preliminary Investigation

ERIC Educational Resources Information Center

Green, David; Lindemann, Iris; Marshall, Kelly; Wilkinson, Grette

2005-01-01

It is accepted that using electronic detection methods has benefits within an overall strategy to promote academic integrity in an institution. Little attention has been paid to obtaining student perceptions to evaluate the cost/benefit of using such methods. This study reports on the evaluation of a trial of Turnitin software. 728 students…

Electronic Health Records: Overcoming Obstacles to Improve Acceptance and Utilization for Mental Health Clinicians

ERIC Educational Resources Information Center

Odom, Stephen A.

2017-01-01

The dynamics and progress of the integration of the electronic health record (EHR) into health-care disciplines have been described and examined using theories related to technology adoption. Previous studies have examined health-care clinician resistance to the EHR in primary care, hospital, and urgent care medical settings, but few studies have…

76 FR 32025 - Endangered and Threatened Wildlife and Plants: Proposed Rulemaking To Revise Critical Habitat for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

...-BA81 by any one of the following methods: Electronic Submissions: Federal eRulemaking Portal: http... required fields if you wish to remain anonymous). Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. The petition, 90-day finding, 12-month...

78 FR 78353 - Hydro Green Energy, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... tetrapods; and (10) a new single-circuit 230-kilovolt transmission line approximately 20 miles in length... electronic filing. Please file comments, motions to intervene, notices of intent, and competing applications....gov , (866) 208-3676 (toll free), or (202) 502- 8659 (TTY). In lieu of electronic filing, please send...

78 FR 78355 - Hydro Green Energy, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... (10) a new single-circuit 230-kilovolt transmission line approximately 12 miles in length. The... intent must meet the requirements of 18 CFR 4.36. The Commission strongly encourages electronic filing... (toll free), or (202) 502- 8659 (TTY). In lieu of electronic filing, please send a paper copy to...

Evaluation of dose variation during total skin electron irradiation using thermoluminescent dosimeters.

PubMed

Weaver, R D; Gerbi, B J; Dusenbery, K E

1995-09-30

To determine acceptable dose variation using thermoluminescent dosimeters (TLD) in the treatment of Mycosis Fungoides with total skin electron beam (TSEB) irradiation. From 1983 to 1993, 22 patients were treated with total skin electron beam therapy in the standing position. A six-field technique was used to deliver 2 Gy in two days, treating 4 days per week, to a total dose of 35 to 40 Gy using a degraded 9 MeV electron beam. Thermoluminescent dosimeters were placed on several locations of the body and the results recorded. The variations in these readings were analyzed to determine normal dose variation for various body locations during TSEB. The dose to flat surfaces of the body was essentially the same as the dose to the prescription point. The dose to tangential surfaces was within +/- 10% of the prescription dose, but the readings showed much more variation (up to 24%). Thin areas of the body showed large deviations from the prescription dose along with a large amount of variation in the readings (up to 22%). Special areas of the body, such as the perineum and eyelid, showed large deviations from the prescription dose with very large (up to 40%) variations in the readings. The TLD results of this study will be used as a quality assurance check for all new patients treated with TSEB. The results of the TLDs will be compared with this baseline study to determine if the delivered dose is within acceptable ranges. If the TLD results fall outside the acceptable limits established above, then the patient position can be modified or the technique itself evaluated.

Geochemistry of dissolved inorganic carbon in a Coastal Plain aquifer. 1. Sulfate from confining beds as an oxidant in microbial CO2 production

USGS Publications Warehouse

Chapelle, F.H.; McMahon, P.B.

1991-01-01

A primary source of dissolved inorganic carbon (DIC) in the Black Creek aquifer of South Carolina is carbon dioxide produced by microbially mediated oxidation of sedimentary organic matter. Groundwater chemistry data indicate, however, that the available mass of inorganic electron acceptors (oxygen, Fe(III), and sulfate) and observed methane production is inadequate to account for observed CO2 production. Although sulfate concentrations are low (approximately 0.05-0.10 mM) in aquifer water throughout the flow system, sulfate concentrations are greater in confining-bed pore water (0.4-20 mM). The distribution of culturable sulfate-reducing bacteria in these sediments suggests that this concentration gradient is maintained by greater sulfate-reducing activity in sands than in clays. Calculations based on Fick's Law indicate that possible rates of sulfate diffusion to aquifer sediments are sufficient to explain observed rates of CO2 production (about 10-5 mmoll-1 year-1), thus eliminating the apparent electron-acceptor deficit. Furthermore, concentrations of dissolved hydrogen in aquifer water are in the range characteristic of sulfate reduction (2-6 nM), which provides independent evidence that sulfate reduction is the predominant terminal electron-accepting process in this system. The observed accumulation of pyrite- and calcite-cemented sandstones at sand-clay interfaces is direct physical evidence that these processes have been continuing over the history of these sediments. ?? 1991.

Hydrogen-Bonded Organic Semiconductor Micro- And Nanocrystals: From Colloidal Syntheses to (Opto-)Electronic Devices

PubMed Central

2014-01-01

Organic pigments such as indigos, quinacridones, and phthalocyanines are widely produced industrially as colorants for everyday products as various as cosmetics and printing inks. Herein we introduce a general procedure to transform commercially available insoluble microcrystalline pigment powders into colloidal solutions of variously sized and shaped semiconductor micro- and nanocrystals. The synthesis is based on the transformation of the pigments into soluble dyes by introducing transient protecting groups on the secondary amine moieties, followed by controlled deprotection in solution. Three deprotection methods are demonstrated: thermal cleavage, acid-catalyzed deprotection, and amine-induced deprotection. During these processes, ligands are introduced to afford colloidal stability and to provide dedicated surface functionality and for size and shape control. The resulting micro- and nanocrystals exhibit a wide range of optical absorption and photoluminescence over spectral regions from the visible to the near-infrared. Due to excellent colloidal solubility offered by the ligands, the achieved organic nanocrystals are suitable for solution processing of (opto)electronic devices. As examples, phthalocyanine nanowire transistors as well as quinacridone nanocrystal photodetectors, with photoresponsivity values by far outperforming those of vacuum deposited reference samples, are demonstrated. The high responsivity is enabled by photoinduced charge transfer between the nanocrystals and the directly attached electron-accepting vitamin B2 ligands. The semiconducting nanocrystals described here offer a cheap, nontoxic, and environmentally friendly alternative to inorganic nanocrystals as well as a new paradigm for obtaining organic semiconductor materials from commercial colorants. PMID:25253644

Acceptability of using electronic vending machines to deliver oral rapid HIV self-testing kits: a qualitative study.

PubMed

Young, Sean D; Daniels, Joseph; Chiu, ChingChe J; Bolan, Robert K; Flynn, Risa P; Kwok, Justin; Klausner, Jeffrey D

2014-01-01

Rates of unrecognized HIV infection are significantly higher among Latino and Black men who have sex with men (MSM). Policy makers have proposed that HIV self-testing kits and new methods for delivering self-testing could improve testing uptake among minority MSM. This study sought to conduct qualitative assessments with MSM of color to determine the acceptability of using electronic vending machines to dispense HIV self-testing kits. African American and Latino MSM were recruited using a participant pool from an existing HIV prevention trial on Facebook. If participants expressed interest in using a vending machine to receive an HIV self-testing kit, they were emailed a 4-digit personal identification number (PIN) code to retrieve the test from the machine. We followed up with those who had tested to assess their willingness to participate in an interview about their experience. Twelve kits were dispensed and 8 interviews were conducted. In general, participants expressed that the vending machine was an acceptable HIV test delivery method due to its novelty and convenience. Acceptability of this delivery model for HIV testing kits was closely associated with three main factors: credibility, confidentiality, and convenience. Future research is needed to address issues, such as user-induced errors and costs, before scaling up the dispensing method.

Advanced manufacturing—A transformative enabling capability for fusion

DOE PAGES

Nygren, Richard E.; Dehoff, Ryan R.; Youchison, Dennis L.; ...

2018-05-24

Additive Manufacturing (AM) can create novel and complex engineered material structures. Features such as controlled porosity, micro-fibers and/or nano-particles, transitions in materials and integral robust coatings can be important in developing solutions for fusion subcomponents. A realistic understanding of this capability would be particularly valuable in identifying development paths. Major concerns for using AM processes with lasers or electron beams that melt powder to make refractory parts are the power required and residual stresses arising in fabrication. A related issue is the required combination of lasers or e-beams to continue heating of deposited material (to reduce stresses) and to depositmore » new material at a reasonable built rate while providing adequate surface finish and resolution for meso-scale features. In conclusion, Some Direct Write processes that can make suitable preforms and be cured to an acceptable density may offer another approach for PFCs.« less

RETRACTED: Diagnosis of cervical cancer cell taken from scanning electron and atomic force microscope images of the same patients using discrete wavelet entropy energy and Jensen Shannon, Hellinger, Triangle Measure classifier

NASA Astrophysics Data System (ADS)

Aytac Korkmaz, Sevcan

2016-05-01

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy) This article has been retracted at the request of the Editors. After a thorough investigation, the Publisher has concluded that the Editor was misled into accepting this article based upon the positive advice of at least one suggested reviewer report. The report was submitted from an email account provided by the author, that was later determined not to be the email of the supposed expert reviewer. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

High-sensitivity green resist material with organic solvent-free spin-coating and tetramethylammonium hydroxide-free water-developable processes for EB and EUV lithography

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Hanabata, Makoto; Oshima, Akihiro; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi

2015-03-01

We investigated the eco-friendly electron beam (EB) and extreme-ultraviolet (EUV) lithography using a high-sensitive negative type of green resist material derived from biomass to take advantage of organic solvent-free water spin-coating and tetramethylammonium hydroxide(TMAH)-free water-developable techniques. A water developable, non-chemically amplified, high sensitive, and negative tone resist material in EB lithography was developed for environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of TMAH. The material design concept to use the water-soluble resist material with acceptable properties such as pillar patterns with less than 100 nm in high EB sensitivity of 10 μC/cm2 and etch selectivity with a silicon-based middle layer in CF4 plasma treatment was demonstrated for EB and EUV lithography.

Advanced manufacturing—A transformative enabling capability for fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nygren, Richard E.; Dehoff, Ryan R.; Youchison, Dennis L.

Additive Manufacturing (AM) can create novel and complex engineered material structures. Features such as controlled porosity, micro-fibers and/or nano-particles, transitions in materials and integral robust coatings can be important in developing solutions for fusion subcomponents. A realistic understanding of this capability would be particularly valuable in identifying development paths. Major concerns for using AM processes with lasers or electron beams that melt powder to make refractory parts are the power required and residual stresses arising in fabrication. A related issue is the required combination of lasers or e-beams to continue heating of deposited material (to reduce stresses) and to depositmore » new material at a reasonable built rate while providing adequate surface finish and resolution for meso-scale features. In conclusion, Some Direct Write processes that can make suitable preforms and be cured to an acceptable density may offer another approach for PFCs.« less

Barriers to and facilitators of the acceptance process for individuals with serious mental illness.

PubMed

Mizock, Lauren; Russinova, Zlatka; Millner, Uma Chandrika

2014-09-01

The process of acceptance of mental illness is a central component of recovery and has been linked to functioning, illness management, and quality of life. A number of barriers and facilitators have been theorized as impacting this process. This study was conducted with 30 participants with serious mental illness (a major psychiatric disorder with impairment in multiple areas of functioning) to elicit the barriers to and facilitators of the acceptance of mental illness. Grounded theory methodology was utilized to analyze the 30 semistructured interviews. Results revealed barriers to and facilitators of acceptance of mental illness at the micro level (cognitive, emotional, behavioral, identity-related), meso level (relational), and macro level (cultural, systemic). Clinical and research implications are discussed with regard to facilitating acceptance of mental illness. © The Author(s) 2014.

Tuning the Electron-Transport and Electron-Accepting Abilities of Dyes through Introduction of Different π-Conjugated Bridges and Acceptors for Dye-Sensitized Solar Cells.

PubMed

Li, Yuanzuo; Sun, Chaofan; Song, Peng; Ma, Fengcai; Yang, Yanhui

2017-02-17

A series of dyes, containing thiophene and thieno[3,2-b]thiophene as π-conjugated bridging units and six kinds of groups as electron acceptors, were designed for dye-sensitized solar cells (DSSCs). The ground- and excited-state properties of the designed dyes were investigated by using density functional theory (DFT) and time-dependent DFT, respectively. Moreover, the parameters affecting the short-circuit current density and open-circuit voltage were calculated to predict the photoelectrical performance of each dye. In addition, the charge difference density was presented through a three-dimensional (3D) real-space analysis method to investigate the electron-injection mechanism in the complexes. Our results show that the longer conjugated bridge would inhibit the intramolecular charge transfer, thereby affecting the photoelectrical properties of DSSCs. Similarly, owing to the lowest chemical hardness, largest electron-accepting ability, dipole moment (μnormal ) and the change in the energy of the TiO 2 conduction band (ΔECB ), the dye with a (E)-3-(4-(benzo[c][1,2,5]thiadiazol-4-yl)phenyl)-2-cyanoacrylic acid (TCA) acceptor group would exhibit the most significant photoelectrical properties among the designed dyes. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Adoption of electronic prescribing for controlled substances among providers and pharmacies.

PubMed

Hufstader Gabriel, Meghan; Yang, Yi; Vaidya, Varun; Wilkins, Tricia Lee

2014-11-01

Electronic prescribing for Schedule II through V controlled substances was legalized in the United States by the Drug Enforcement Administration in June 2010. However, little information exists about adoption and use of the electronic prescribing of controlled substances (EPCS) at the national level. Therefore, the objective of this study is to present the first information about national trends surrounding the adoption and use of the newly allowed EPCS by providers and pharmacies in the United States. Trends of EPCS adoption and use were examined for the number of EPCS, number of pharmacies enabled to accept EPCS, and the number of providers prescribing controlled substances electronically. Using nationally representative transactional Surescripts data from July 2012 to December 2013, we examined EPCS trends. During the study period, the total number of EPCS increased from 1535 to 52,423, and the number and percentage of all pharmacies enabled for EPCS increased from 8768 (13%) to 20,498 pharmacies (30%). The proportion of all providers prescribing controlled substances electronically is currently 1%, but increasing steadily each month. There is a positive national growth for EPCS in pharmacy preparedness to accept EPCS, the number of EPCS prescriptions sent each month, and the number of providers with the ability to send EPCS.

Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

DTIC Science & Technology

1990-12-12

Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

Patient care transitions from the emergency department to the medicine ward: evaluation of a standardized electronic signout tool.

PubMed

Gonzalo, Jed D; Yang, Julius J; Stuckey, Heather L; Fischer, Christopher M; Sanchez, Leon D; Herzig, Shoshana J

2014-08-01

To evaluate the impact of a new electronic handoff tool for emergency department to medicine ward patient transfers over a 1-year period. Prospective mixed-methods analysis of data submitted by medicine residents following admitting shifts before and after eSignout implementation. University-based, tertiary-care hospital. Internal medicine resident physicians admitting patients from the emergency department. An electronic handoff tool (eSignout) utilizing automated paging communication and responsibility acceptance without mandatory verbal communication between emergency department and medicine ward providers. (i) Incidence of reported near misses/adverse events, (ii) communication of key clinical information and quality of verbal communication and (iii) characterization of near misses/adverse events. Seventy-eight of 80 surveys (98%) and 1058 of 1388 surveys (76%) were completed before and after eSignout implementation. Compared with pre-intervention, residents in the post-intervention period reported similar number of shifts with a near miss/adverse event (10.3 vs. 7.8%; P = 0.27), similar communication of key clinical information, and improved verbal signout quality, when it occurred. Compared with the former process requiring mandatory verbal communication, 93% believed the eSignout was more efficient and 61% preferred the eSignout. Patient safety issues related to perceived sufficiency/accuracy of diagnosis, treatment or disposition, and information quality. The eSignout was perceived as more efficient and preferred over the mandatory verbal signout process. Rates of reported adverse events were similar before and after the intervention. Our experience suggests electronic platforms with optional verbal communication can be used to standardize and improve the perceived efficiency of patient handoffs. © The Author 2014. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Electronic Brief Intervention and Text Messaging for Marijuana Use During Pregnancy: Initial Acceptability of Patients and Providers

PubMed Central

Gray, Justin; Svikis, Dace S; Puder, Karoline S; Resnicow, Ken; Konkel, Janine; Rice, Shetoya; McGoron, Lucy; Ondersma, Steven J

2017-01-01

Background Marijuana is the most widely used illicit substance during pregnancy. Technology-delivered brief interventions and text messaging have shown promise in general and pregnant samples but have not yet been applied to marijuana use in pregnancy. Objective The objective of the study was to evaluate, among pregnant women and prenatal care providers, the acceptability of an electronic brief intervention and text messaging plan for marijuana use in pregnancy. Methods Participants included patients (n=10) and medical staff (n=12) from an urban prenatal clinic. Patient-participants were recruited directly during a prenatal care visit. Those who were eligible reviewed the interventions individually and provided quantitative and qualitative feedback regarding software acceptability and helpfulness during a one-on-one interview with research staff. Provider-participants took part in focus groups in which the intervention materials were reviewed and discussed. Qualitative and focus group feedback was transcribed, coded manually, and classified by category and theme. Results Patient-participants provided high ratings for satisfaction, with mean ratings for respectfulness, interest, ease of use, and helpfulness ranging between 4.4 and 4.7 on a 5-point Likert scale. Of the 10 participants, 5 reported that they preferred working with the program versus their doctor, and 9 of 10 said the intervention made them more likely to reduce their marijuana use. Provider-participants received the program favorably, stating the information presented was both relevant and important for their patient population. Conclusions The findings support the acceptability of electronic brief intervention and text messaging for marijuana use during pregnancy. This, combined with their ease of use and low barrier to initiation, suggests that further evaluation in a randomized trial is appropriate. PMID:29117931

Dark chocolate acceptability: influence of cocoa origin and processing conditions.

PubMed

Torres-Moreno, Miriam; Tarrega, Amparo; Costell, Elvira; Blanch, Consol

2012-01-30

Chocolate properties can vary depending on cocoa origin, composition and manufacturing procedure, which affect consumer acceptability. The aim of this work was to study the effect of two cocoa origins (Ghana and Ecuador) and two processing conditions (roasting time and conching time) on dark chocolate acceptability. Overall acceptability and acceptability for different attributes (colour, flavour, odour and texture) were evaluated by 95 consumers. Differences in acceptability among dark chocolates were mainly related to differences in flavour acceptability. The use of a long roasting time lowered chocolate acceptability in Ghanaian samples while it had no effect on acceptability of Ecuadorian chocolates. This response was observed for most consumers (two subgroups with different frequency consumption of dark chocolate). However, for a third group of consumers identified as distinguishers, the most acceptable dark chocolate samples were those produced with specific combinations of roasting time and conching time for each of the cocoa geographical origin considered. To produce dark chocolates from a single origin it is important to know the target market preferences and to select the appropriate roasting and conching conditions. Copyright © 2011 Society of Chemical Industry.

Do surveys with paper and electronic devices differ in quality and cost? Experience from the Rufiji Health and demographic surveillance system in Tanzania.

PubMed

Mukasa, Oscar; Mushi, Hildegalda P; Maire, Nicolas; Ross, Amanda; de Savigny, Don

2017-01-01

Data entry at the point of collection using mobile electronic devices may make data-handling processes more efficient and cost-effective, but there is little literature to document and quantify gains, especially for longitudinal surveillance systems. To examine the potential of mobile electronic devices compared with paper-based tools in health data collection. Using data from 961 households from the Rufiji Household and Demographic Survey in Tanzania, the quality and costs of data collected on paper forms and electronic devices were compared. We also documented, using qualitative approaches, field workers, whom we called 'enumerators', and households' members on the use of both methods. Existing administrative records were combined with logistics expenditure measured directly from comparison households to approximate annual costs per 1,000 households surveyed. Errors were detected in 17% (166) of households for the paper records and 2% (15) for the electronic records (p < 0.001). There were differences in the types of errors (p = 0.03). Of the errors occurring, a higher proportion were due to accuracy in paper surveys (79%, 95% CI: 72%, 86%) compared with electronic surveys (58%, 95% CI: 29%, 87%). Errors in electronic surveys were more likely to be related to completeness (32%, 95% CI 12%, 56%) than in paper surveys (11%, 95% CI: 7%, 17%).The median duration of the interviews ('enumeration'), per household was 9.4 minutes (90% central range 6.4, 12.2) for paper and 8.3 (6.1, 12.0) for electronic surveys (p = 0.001). Surveys using electronic tools, compared with paper-based tools, were less costly by 28% for recurrent and 19% for total costs. Although there were technical problems with electronic devices, there was good acceptance of both methods by enumerators and members of the community. Our findings support the use of mobile electronic devices for large-scale longitudinal surveys in resource-limited settings.

Field-scale modeling of acidity production and remediation efficiency during in situ reductive dechlorination

NASA Astrophysics Data System (ADS)

Brovelli, A.; Robinson, C. E.; Barry, D. A.; Gerhard, J.

2009-12-01

Enhanced reductive dechlorination is a viable technology for in situ remediation of chlorinated solvent DNAPL source areas. Although in recent years increased understanding of this technology has led to more rapid dechlorination rates, complete dechlorination can be hindered by unfavorable conditions. Hydrochloric acid produced from dechlorination and organic acids generated from electron donor fermentation can lead to significant groundwater acidification. Adverse pH conditions can inhibit the activity of dehalogenating microorganisms and thus slow or stall the remediation process. The extent of acidification likely to occur at a contaminated site depends on a number of factors including (1) the extent of dechlorination, (2) the pH-sensitivity of dechlorinating bacteria, and (3) the geochemical composition of the soil and water, in particular the soil’s natural buffering capacity. The substantial mass of solvents available for dechlorination when treating DNAPL source zones means that these applications are particularly susceptible to acidification. In this study a reactive transport biogeochemical model was developed to investigate the chemical and physical parameters that control the build-up of acidity and subsequent remediation efficiency. The model accounts for the site water chemistry, mineral precipitation and dissolution kinetics, electron donor fermentation, gas phase formation, competing electron-accepting processes (e.g., sulfate and iron reduction) and the sensitivity of microbial processes to pH. Confidence in the model was achieved by simulating a well-documented field study, for which the 2-D field scale model was able to reproduce long-term variations of pH, and the concurrent build up of reaction products. Sensitivity analyses indicated the groundwater flow velocity is able to reduce acidity build-up when the rate of advection is comparable or larger than the rate of dechlorination. The extent of pH change is highly dependent on the presence of calcite in soil, the availability of competing electron acceptors (in particular dissolved sulfates) and the efficiency with which microbes utilize electron donor. This work is part of SABRE (Source Area BioREmediation), a collaborative international research project that aimed to evaluate and improve enhanced bioremediation of chlorinated solvent source zones.

Measurement of Tensor Analyzing Powers for Elastic Electron Scattering from a Polarized 2H Target Internal to a Storage Ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Ferro-Luzzi; M. Bouwhuis; E. Passchier

1996-09-23

We report an absolute measurement of the tensor analyzing powers T20 and T22 in elastic electron-deuteron scattering at a momentum transfer of 1.6 fm{sup -1}. The novel approach of this measurement is the use of a tensor polarized 2H target internal to an electron storage ring, with in situ measurement of the polarization of the target gas. Scattered electrons and recoil deuterons were detected in coincidence with two large acceptance nonmagnetic detectors. The techniques demonstrated have broad applicability to further measurements of spin-dependent electron scattering.

Electron-Poor Polar Intermetallics: Complex Structures, Novel Clusters, and Intriguing Bonding with Pronounced Electron Delocalization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Qisheng; Miller, Gordon J.

Intermetallic compounds represent an extensive pool of candidates for energy related applications stemming from magnetic, electric, optic, caloric, and catalytic properties. The discovery of novel intermetallic compounds can enhance understanding of the chemical principles that govern structural stability and chemical bonding as well as finding new applications. Valence electron-poor polar intermetallics with valence electron concentrations (VECs) between 2.0 and 3.0 e –/atom show a plethora of unprecedented and fascinating structural motifs and bonding features. Furthermore, establishing simple structure-bonding-property relationships is especially challenging for this compound class because commonly accepted valence electron counting rules are inappropriate.

Electron-Poor Polar Intermetallics: Complex Structures, Novel Clusters, and Intriguing Bonding with Pronounced Electron Delocalization

DOE PAGES

Lin, Qisheng; Miller, Gordon J.

2017-12-18

Intermetallic compounds represent an extensive pool of candidates for energy related applications stemming from magnetic, electric, optic, caloric, and catalytic properties. The discovery of novel intermetallic compounds can enhance understanding of the chemical principles that govern structural stability and chemical bonding as well as finding new applications. Valence electron-poor polar intermetallics with valence electron concentrations (VECs) between 2.0 and 3.0 e –/atom show a plethora of unprecedented and fascinating structural motifs and bonding features. Furthermore, establishing simple structure-bonding-property relationships is especially challenging for this compound class because commonly accepted valence electron counting rules are inappropriate.

A novel mesoporous silica nanosphere matrix for the immobilization of proteins and their applications as electrochemical biosensor.

PubMed

Li, Juan; Qin, Xingzhang; Yang, Zhanjun; Qi, Huamei; Xu, Qin; Diao, Guowang

2013-01-30

A mesoporous silica nanoshpere (MSN) was proposed to modify glassy carbon electrode (GCE) for the immobilization of protein. Using glucose oxidase (GOD) as a model, direct electrochemistry of protein and biosensing at the MSN modified GCE was studied for the first time. The MNS had large surface area and offered a favorable microenvironment for facilitating the direct electron transfer between enzyme and electrode surface. Scanning electron microscopy, transmission electron microscopy, UV-vis spectroscopy and cyclic voltammetry were used to examine the interaction between GOD and the MSN matrix. The results demonstrated that the immobilized enzyme on the MSN retained its native structure and bioactivity. In addition, the electrochemical reaction showed a surface controlled, reversible two-proton and two-electron transfer process with the apparent electron transfer rate constant of 3.96 s(-1). The MNS-based glucose biosensor exhibited the two linear ranges of 0.04-2.0 mM and 2.0-4.8 mM, a high sensitivity of 14.5 mA M(-1) cm(-2) and a low detection limit of 0.02 mM at signal-to-noise of 3. The proposed biosensor showed excellent selectivity, good reproducibility, acceptable stability and could be successfully applied in the reagentless detection of glucose in real samples at -0.45 V. The work displayed that mesoporous silica nanosphere provided a promising approach for immobilizing proteins and fabrication of excellent biosensors. Copyright © 2012 Elsevier B.V. All rights reserved.

A systematic review of patient acceptance of consumer health information technology.

PubMed

Or, Calvin K L; Karsh, Ben-Tzion

2009-01-01

A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation.

Patients' experiences when accessing their on-line electronic patient records in primary care.

PubMed Central

Pyper, Cecilia; Amery, Justin; Watson, Marion; Crook, Claire

2004-01-01

BACKGROUND: Patient access to on-line primary care electronic patient records is being developed nationally. Knowledge of what happens when patients access their electronic records is poor. AIM: To enable 100 patients to access their electronic records for the first time to elicit patients' views and to understand their requirements. DESIGN OF STUDY: In-depth interviews using semi-structured questionnaires as patients accessed their electronic records, plus a series of focus groups. SETTING: Secure facilities for patients to view their primary care records privately. METHOD: One hundred patients from a randomised group viewed their on-line electronic records for the first time. The questionnaire and focus groups addressed patients' views on the following topics: ease of use; confidentiality and security; consent to access; accuracy; printing records; expectations regarding content; exploitation of electronic records; receiving new information and bad news. RESULTS: Most patients found the computer technology used acceptable. The majority found viewing their record useful and understood most of the content, although medical terms and abbreviations required explanation. Patients were concerned about security and confidentiality, including potential exploitation of records. They wanted the facility to give informed consent regarding access and use of data. Many found errors, although most were not medically significant. Many expected more detail and more information. Patients wanted to add personal information. CONCLUSION: Patients have strong views on what they find acceptable regarding access to electronic records. Working in partnership with patients to develop systems is essential to their success. Further work is required to address legal and ethical issues of electronic records and to evaluate their impact on patients, health professionals and service provision. PMID:14965405

Development of an integrated e-health tool for people with, or at high risk of, cardiovascular disease: The Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) web application.

PubMed

Neubeck, Lis; Coorey, Genevieve; Peiris, David; Mulley, John; Heeley, Emma; Hersch, Fred; Redfern, Julie

2016-12-01

Cardiovascular disease is the leading killer globally and secondary prevention substantially reduces risk. Uptake of, and adherence to, face-to-face preventive programs is often low. Alternative models of care are exploiting the prominence of technology in daily life to facilitate lifestyle behavior change. To inform the development of a web-based application integrated with the primary care electronic health record, we undertook a collaborative user-centered design process to develop a consumer-focused e-health tool for cardiovascular disease risk reduction. A four-phase iterative process involved ten multidisciplinary clinicians and academics (primary care physician, nurses and allied health professionals), two design consultants, one graphic designer, three software developers and fourteen proposed end-users. This 18-month process involved, (1) defining the target audience and needs, (2) pilot testing and refinement, (3) software development including validation and testing the algorithm, (4) user acceptance testing and beta testing. From this process, researchers were able to better understand end-user needs and preferences, thereby improving and enriching the increasingly detailed system designs and prototypes for a mobile responsive web application. We reviewed 14 relevant applications/websites and sixteen observational and interventional studies to derive a set of core components and ideal features for the system. These included the need for interactivity, visual appeal, credible health information, virtual rewards, and emotional and physical support. The features identified as essential were: (i) both mobile and web-enabled 'apps', (ii) an emphasis on medication management, (iii) a strong psychosocial support component. Subsequent workshops (n=6; 2×1.5h) informed the development of functionality and lo-fidelity sketches of application interfaces. These ideas were next tested in consumer focus groups (n=9; 3×1.5h). Specifications for the application were refined from this feedback and a graphic designer iteratively developed the interface. Concurrently, the electronic health record was linked to the consumer portal. A written description of the final algorithms for all decisions and outputs was provided to software programmers. These algorithmic outputs to the app were first validated against those obtained from an independently programmed version in STATA 11. User acceptance testing (n=5, 2×1.0h) and beta testing revealed technical bugs and interface concerns across commonly-used web browsers and smartphones. These were resolved and re-tested until functionality was optimized. End-users of a cardiovascular disease prevention program have complex needs. A user-centered design approach aided the integration of these needs into the concept, specifications, development and refinement of a responsive web application for risk factor reduction and disease prevention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Development of a Telehealth Intervention for Head and Neck Cancer Patients

PubMed Central

Studts, Jamie L.; Bumpous, Jeffrey M.; Gregg, Jennifer L.; Wilson, Liz; Keeney, Cynthia; Scharfenberger, Jennifer A.; Pfeifer, Mark P.

2009-01-01

Abstract Treatment for head and neck cancer precipitates a myriad of distressing symptoms. Patients may be isolated both physically and socially and may lack the self-efficacy to report problems and participate as partners in their care. The goal of this project was to design a telehealth intervention to address such isolation, develop patient self-efficacy, and improve symptom management during the treatment experience. Participatory action research and a review of the literature were used to develop electronically administered symptom management algorithms addressing all major symptoms experienced by patients undergoing treatment for head and neck cancers. Daily questions and related messages were then programmed into an easy-to-use telehealth messaging device, the Health Buddy®. Clinician and patient acceptance, feasibility, and technology issues were measured. Using participatory action research is an effective means for developing electronic algorithms acceptable to both clinicians and patients. The use of a simple tele-messaging device as an adjunct to symptom management is feasible, affordable, and acceptable to patients. This telehealth intervention provides support and education to patients undergoing treatment for head and neck cancers. PMID:19199847

Development of a telehealth intervention for head and neck cancer patients.

PubMed

Head, Barbara A; Studts, Jamie L; Bumpous, Jeffrey M; Gregg, Jennifer L; Wilson, Liz; Keeney, Cynthia; Scharfenberger, Jennifer A; Pfeifer, Mark P

2009-01-01

Treatment for head and neck cancer precipitates a myriad of distressing symptoms. Patients may be isolated both physically and socially and may lack the self-efficacy to report problems and participate as partners in their care. The goal of this project was to design a telehealth intervention to address such isolation, develop patient self-efficacy, and improve symptom management during the treatment experience. Participatory action research and a review of the literature were used to develop electronically administered symptom management algorithms addressing all major symptoms experienced by patients undergoing treatment for head and neck cancers. Daily questions and related messages were then programmed into an easy-to-use telehealth messaging device, the Health Buddy(R). Clinician and patient acceptance, feasibility, and technology issues were measured. Using participatory action research is an effective means for developing electronic algorithms acceptable to both clinicians and patients. The use of a simple tele-messaging device as an adjunct to symptom management is feasible, affordable, and acceptable to patients. This telehealth intervention provides support and education to patients undergoing treatment for head and neck cancers.

Process Acceptance and Adoption by IT Software Project Practitioners

ERIC Educational Resources Information Center

Guardado, Deana R.

2012-01-01

This study addresses the question of what factors determine acceptance and adoption of processes in the context of Information Technology (IT) software development projects. This specific context was selected because processes required for managing software development projects are less prescriptive than in other, more straightforward, IT…

Integrated Sensing and Processing in Missile Systems

DTIC Science & Technology

2004-03-31

Nanoprobes: The Geometry of Processing and Sensing," H. A. Schmitt, et al., 5th Asian Control Conference, Melbourne, Australia, 2004, accepted. 17. [CR...Computers, Special session on "Signal Processing for Agile Sensors, Pacific Grove, CA, 7-10 November 2004, accepted. 20. [CI] "Computational Origami for

Template for success: using a resident-designed sign-out template in the handover of patient care.

PubMed

Clark, Clancy J; Sindell, Sarah L; Koehler, Richard P

2011-01-01

Report our implementation of a standardized handover process in a general surgery residency program. The standardized handover process, sign-out template, method of implementation, and continuous quality improvement process were designed by general surgery residents with support of faculty and senior hospital administration using standard work principles and business models of the Virginia Mason Production System and the Toyota Production System. Nonprofit, tertiary referral teaching hospital. General surgery residents, residency faculty, patient care providers, and hospital administration. After instruction in quality improvement initiatives, a team of general surgery residents designed a sign-out process using an electronic template and standard procedures. The initial implementation phase resulted in 73% compliance. Using resident-driven continuous quality improvement processes, real-time feedback enabled residents to modify and improve this process, eventually attaining 100% compliance and acceptance by residents. The creation of a standardized template and protocol for patient handovers might eliminate communication failures. Encouraging residents to participate in this process can establish the groundwork for successful implementation of a standardized handover process. Integrating a continuous quality-improvement process into such an initiative can promote active participation of busy general surgery residents and lead to successful implementation of standard procedures. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Acceptance and Usage of Electronic Health Record Systems in Small Medical Practices

ERIC Educational Resources Information Center

Tannan, Ritu

2012-01-01

One of the objectives of the U.S. government has been the development of a nationwide health information infrastructure, including adoption and use of an electronic health records (EHR) system. However, a 2008 survey conducted by the National Center for Health Statistics indicated a 41.5% usage of the EHR system by physicians in office-based…

75 FR 52940 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Chartered Science...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... should be supplied to the DFO in the following formats: One hard copy with original signature and one electronic copy via e-mail (acceptable file format: Adobe Acrobat PDF, MS Word, WordPerfect, MS PowerPoint, or Rich Text files in IBM-PC/Windows 98/2000/XP format). Submitters are asked to provide electronic...

Preparation and Degradation of Polysilylenes

DTIC Science & Technology

1991-05-02

Grignard reagent formation from Mg and alkyl iodides in comparison with less reactive alkyl chlorides 2 3 . Electron transfer to the chlorides occur at...stoichiometric balance of reagents and nearly complete conversions (e.g. DPN-100 at 99% conversion in a homogeneous polycondensation with exact stoichiometric...the magnesium surface, whereas alkyl iodides accept electrons through Ŝ. larger distance and could not efficiently form organomagneslum reagents but

IEEE Validation of the Continuing Education Achievement of Engineers Registry System. Procedures for Use with a CPT 8000 Word Processor and Communications Package.

ERIC Educational Resources Information Center

Institute of Electrical and Electronics Engineers, Inc., New York, NY.

The Institute of Electrical and Electronics Engineers (IEEE) validation program is designed to motivate persons practicing in electrical and electronics engineering to pursue quality technical continuing education courses offered by any responsible sponsor. The rapid acceptance of the validation program necessitated the additional development of a…

Obstacles and Opportunites of iPad Use Balance of Acceptance in a Texas School System

ERIC Educational Resources Information Center

Gros, Lisa Horst

2013-01-01

"A Kindle in Every Backpack", a proposal written by Thomas Z. Freedman and published by the Democratic Leadership council called for a Kindle or some other electronic reading device for every child in the United States in grades kindergarten through 12. The proposal stated that while the electronic reading devices, eReaders, would be…

Thermally activated delayed fluorescence of a Zr-based metal–organic framework

DOE PAGES

Mieno, H.; Kabe, R.; Allendorf, M. D.; ...

2017-12-22

Here, the first metal–organic framework exhibiting thermally activated delayed fluorescence (TADF) was developed. The zirconium-based framework (UiO-68-dpa) uses a newly designed linker composed of a terphenyl backbone, an electron-accepting carboxyl group, and an electron-donating diphenylamine and exhibits green TADF emission with a photoluminescence quantum yield of 30% and high thermal stability.

The Study of Electronic Medical Record Adoption in a Medicare Certified Home Health Agency Using a Grounded Theory Approach

ERIC Educational Resources Information Center

May, Joy L.

2013-01-01

The purpose of this qualitative grounded theory study was to examine the experiences of clinicians in the adoption of Electronic Medical Records in a Medicare certified Home Health Agency. An additional goal for this study was to triangulate qualitative research between describing, explaining, and exploring technology acceptance. The experiences…

Electronic Health Records: Applying Diffusion of Innovation Theory to the Relationship between Multifactor Authentication and EHR Adoption

ERIC Educational Resources Information Center

Lockett, Daeron C.

2014-01-01

Electronic Health Record (EHR) systems are increasingly becoming accepted as future direction of medical record management systems. Programs such as the American Recovery and Reinvestment Act have provided incentives to hospitals that adopt EHR systems. In spite of these incentives, the perception of EHR adoption is that is has not achieved the…

Photosensitized oxidation of nicotinamide adenine dinucleotide by diethoxyphosphorus(V)tetraphenylporphyrin and its fluorinated derivative: Possibility of chain reaction

NASA Astrophysics Data System (ADS)

Hirakawa, Kazutaka; Murata, Atsushi

2018-01-01

Water-soluble porphyrins, diethoxyphosphorus(V)tetraphenylporphyrin (EtP(V)TPP) and its fluorinated analogue (FEtP(V)TPP), decreased the typical absorption around 340 nm of nicotinamide adenine dinucleotide (NADH) under visible light irradiation, indicating oxidative decomposition. A singlet oxygen quencher, sodium azide, and a triplet quencher, potassium iodide, slightly inhibited photosensitized NADH oxidation. However, these inhibitory effects were very small. Furthermore, the fluorescence lifetime of these P(V)porphyrins was decreased by NADH, suggesting the contribution of electron transfer to the singlet excited (S1) state of P(V)porphyrin. The redox potential measurement supports the electron transfer-mediated oxidation of NADH. The quantum yields of NADH photodecomposition by P(V)porphyrins could be estimated from the kinetic data and the effect of these quenchers on NADH oxidation. The obtained values suggest that the electron accepting by the S1 states of P(V)porphyrins triggers a chain reaction of NADH oxidation. This photosensitized reaction may play an important role in the photocytotoxicity of P(V)porphyrins. The axial ligand fluorination of P(V)porphyrins improved electron accepting ability. However, fluorination slightly suppressed static interaction with NADH, resulting in decreased oxidation quantum yield.

Carbon dot-Au(i)Ag(0) assembly for the construction of an artificial light harvesting system.

PubMed

Jana, Jayasmita; Aditya, Teresa; Pal, Tarasankar

2018-03-06

Artificial light harvesting systems (LHS) with inorganic counterparts are considered to be robust as well as mechanistically simple, where the system follows the donor-acceptor principle with an unchanged structural pattern. Plasmonic gold or silver nanoparticles are mostly chosen as inorganic counterparts to design artificial LHS. To capitalize on its electron accepting capability, Au(i) has been considered in this work for the synergistic stabilization of a system with intriguingly fluorescing silver(0) clusters produced in situ. Thus a stable fluorescent Au(i)Ag(0) assembly is generated with electron accepting capabilities. On the other hand, carbon dots have evolved as new fluorescent probes due to their unique physicochemical properties. Utilizing the simple electronic behavior of carbon dots, an electronic interaction between the fluorescent Au(i)Ag(0) and a carbon dot has been investigated for the construction of a new artificial light harvesting system. This coinage metal assembly allows surface energy transfer where it acts as an acceptor, while the carbon dot behaves as a good donor. The energy transfer efficiency has been calculated experimentally to be significant (81.3%) and the Au(i)Ag(0)-carbon dot assembly paves the way for efficient artificial LHS.

The Journal of Earth System Science Education: Peer Review for Digital Earth and Digital Library Content

NASA Astrophysics Data System (ADS)

Johnson, D.; Ruzek, M.; Weatherley, J.

2001-05-01

The Journal of Earth System Science Education is a new interdisciplinary electronic journal aiming to foster the study of the Earth as a system and promote the development and exchange of interdisciplinary learning resources for formal and informal education. JESSE will serve educators and students by publishing and providing ready electronic access to Earth system and global change science learning resources for the classroom and will provide authors and creators with professional recognition through publication in a peer reviewed journal. JESSE resources foster a world perspective by emphasizing interdisciplinary studies and bridging disciplines in the context of the Earth system. The Journal will publish a wide ranging variety of electronic content, with minimal constraints on format, targeting undergraduate educators and students as the principal readership, expanding to a middle and high school audience as the journal matures. JESSE aims for rapid review and turn-around of resources to be published, with a goal of 12 weeks from submission to publication for resources requiring few changes. Initial publication will be on a quarterly basis until a flow of resource submissions is established to warrant continuous electronic publication. JESSE employs an open peer review process in which authors and reviewers discuss directly the acceptability of a resource for publication using a software tool called the Digital Document Discourse Environment. Reviewer comments and attribution will be available with the resource upon acceptance for publication. JESSE will also implement a moderated peer commentary capability where readers can comment on the use of a resource or make suggestions. In the development phase, JESSE will also conduct a parallel anonymous review of content to validate and ensure credibility of the open review approach. Copyright of materials submitted remains with the author, granting JESSE the non-exclusive right to maintain a copy of the resource published on the JESSE web server, ensuring long term access to the resource as reviewed. JESSE is collaborating with the Digital Library for Earth System Education (DLESE) as a federated partner. Initial release is planned for Summer, 2001.

Factors influencing acceptance of technology for aging in place: a systematic review.

PubMed

Peek, Sebastiaan T M; Wouters, Eveline J M; van Hoof, Joost; Luijkx, Katrien G; Boeije, Hennie R; Vrijhoef, Hubertus J M

2014-04-01

To provide an overview of factors influencing the acceptance of electronic technologies that support aging in place by community-dwelling older adults. Since technology acceptance factors fluctuate over time, a distinction was made between factors in the pre-implementation stage and factors in the post-implementation stage. A systematic review of mixed studies. Seven major scientific databases (including MEDLINE, Scopus and CINAHL) were searched. Inclusion criteria were as follows: (1) original and peer-reviewed research, (2) qualitative, quantitative or mixed methods research, (3) research in which participants are community-dwelling older adults aged 60 years or older, and (4) research aimed at investigating factors that influence the intention to use or the actual use of electronic technology for aging in place. Three researchers each read the articles and extracted factors. Sixteen out of 2841 articles were included. Most articles investigated acceptance of technology that enhances safety or provides social interaction. The majority of data was based on qualitative research investigating factors in the pre-implementation stage. Acceptance in this stage is influenced by 27 factors, divided into six themes: concerns regarding technology (e.g., high cost, privacy implications and usability factors); expected benefits of technology (e.g., increased safety and perceived usefulness); need for technology (e.g., perceived need and subjective health status); alternatives to technology (e.g., help by family or spouse), social influence (e.g., influence of family, friends and professional caregivers); and characteristics of older adults (e.g., desire to age in place). When comparing these results to qualitative results on post-implementation acceptance, our analysis showed that some factors are persistent while new factors also emerge. Quantitative results showed that a small number of variables have a significant influence in the pre-implementation stage. Fourteen out of the sixteen included articles did not use an existing technology acceptance framework or model. Acceptance of technology in the pre-implementation stage is influenced by multiple factors. However, post-implementation research on technology acceptance by community-dwelling older adults is scarce and most of the factors in this review have not been tested by using quantitative methods. Further research is needed to determine if and how the factors in this review are interrelated, and how they relate to existing models of technology acceptance. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Proceedings - Limits of Acceptable Change and related planning processes: Progress and future directions

Treesearch

Stephen F. McCool; David N. Cole

1997-01-01

Experience with Limits of Acceptable Change (LAC) and related planning processes has accumulated since the mid-1980's. These processes were developoed as a means of dealing with recreation carrying capacity issues in wilderness and National Parks. These processes clearly also have application outside of protected areas and to issues other than recreation...

48 CFR 1446.670 - Inspection, receiving and acceptance reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... each commercial shipping document or packing list, whether by manual or electronic means, for supplies... INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670...

48 CFR 1446.670 - Inspection, receiving and acceptance reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... each commercial shipping document or packing list, whether by manual or electronic means, for supplies... INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670...

48 CFR 1446.670 - Inspection, receiving and acceptance reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... each commercial shipping document or packing list, whether by manual or electronic means, for supplies... INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670...

48 CFR 1446.670 - Inspection, receiving and acceptance reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... each commercial shipping document or packing list, whether by manual or electronic means, for supplies... INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670...

48 CFR 1446.670 - Inspection, receiving and acceptance reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... each commercial shipping document or packing list, whether by manual or electronic means, for supplies... INTERIOR CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1446.670...

SU-F-P-37: Implementation of An End-To-End QA Test of the Radiation Therapy Imaging, Planning and Delivery Process to Identify and Correct Possible Sources of Deviation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salinas Aranda, F; Suarez, V; Arbiser, S

2016-06-15

Purpose: To implement an end-to-end QA test of the radiation therapy imaging, planning and delivery process, aimed to assess the dosimetric agreement accuracy between planned and delivered treatment, in order to identify and correct possible sources of deviation. To establish an internal standard for machine commissioning acceptance. Methods: A test involving all steps of the radiation therapy: imaging, planning and delivery process was designed. The test includes analysis of point dose and planar dose distributions agreement between TPS calculated and measured dose. An ad hoc 16 cm diameter PMMA phantom was constructed with one central and four peripheral bores thatmore » can accommodate calibrated electron density inserts. Using Varian Eclipse 10.0 and Elekta XiO 4.50 planning systems, IMRT, RapidArc and 3DCRT with hard and dynamic wedges plans were planned on the phantom and tested. An Exradin A1SL chamber is used with a Keithley 35617EBS electrometer for point dose measurements in the phantom. 2D dose distributions were acquired using MapCheck and Varian aS1000 EPID.Gamma analysis was performed for evaluation of 2D dose distribution agreement using MapCheck software and Varian Portal Dosimetry Application.Varian high energy Clinacs Trilogy, 2100C/CD, 2000CR and low energy 6X/EX where tested.TPS-CT# vs. electron density table were checked for CT-scanners used. Results: Calculated point doses were accurate to 0.127% SD: 0.93%, 0.507% SD: 0.82%, 0.246% SD: 1.39% and 0.012% SD: 0.01% for LoX-3DCRT, HiX-3DCRT, IMRT and RapidArc plans respectively. Planar doses pass gamma 3% 3mm in all cases and 2% 2mm for VMAT plans. Conclusion: Implementation of a simple and reliable quality assurance tool was accomplished. The end-to-end proved efficient, showing excellent agreement between planned and delivered dose evidencing strong consistency of the whole process from imaging through planning to delivery. This test can be used as a first step in beam model acceptance for clinical use.« less

An Elaboration Likelihood Model Based Longitudinal Analysis of Attitude Change during the Process of IT Acceptance via Education Program

ERIC Educational Resources Information Center

Lee, Woong-Kyu

2012-01-01

The principal objective of this study was to gain insight into attitude changes occurring during IT acceptance from the perspective of elaboration likelihood model (ELM). In particular, the primary target of this study was the process of IT acceptance through an education program. Although the Internet and computers are now quite ubiquitous, and…

Readout Electronics for the ATLAS LAr Calorimeter at HL-LHC

NASA Astrophysics Data System (ADS)

Chen, Hucheng; ATLAS Liquid Argon Calorimeter Group

The ATLAS Liquid Argon (LAr) calorimeters are high precision, high sensitivity and high granularity detectors designed to provide precision measurements of electrons, photons, jets and missing transverse energy. ATLAS and its LAr calorimeters have been operating and collecting proton-proton collisions at LHC since 2009. The current front-end electronics of the LAr calorimeters need to be upgraded to sustain the higher radiation levels and data rates expected at the upgraded high luminosity LHC machine (HL-LHC), which will have 5 times more luminosity than the LHC in its ultimate configuration. The complexity of the present electronics and the obsolescence of some of components of which it is made, will not allow a partial replacement of the system. A completely new readout architecture scheme is under study and many components are being developed in various R&D programs of the LAr Calorimeter Group.The new front-end readout electronics will send data continuously at each bunch crossing through high speed radiation resistant optical links. The data will be processed real-time with the possibility of implementing trigger algorithms for clusters and electron/photon identification at a higher granularity than that which is currently implemented. The new architecture will eliminate the intrinsic limitation presently existing on Level-1 trigger acceptance. This article is an overview of the R&D activities which covers architectural design aspects of the new electronics as well as some detailed progress on the development of several ASICs needed, and preliminary studies with FPGAs to cover the backend functions including part of the Level-1 trigger requirements. A recently proposed staged upgrade with hybrid Tower Builder Board (TBB) is also described.

Stepwise Bay Annulation of Indigo for the Synthesis of Desymmetrized Electron Acceptors and Donor–Acceptor Constructs

DOE PAGES

Kolaczkowski, Matthew A.; He, Bo; Liu, Yi

2016-10-10

In this work, a selective stepwise annulation of indigo has been demonstrated as a means of providing both monoannulated and differentially double-annulated indigo derivatives. Disparate substitution of the electron accepting bay-annulated indigo system allows for fine control over both the electronic properties as well as donor-acceptor structural architectures. Optical and electronic properties were characterized computationally as well as through UV-vis absorption spectroscopy and cyclic voltammetry. Finally, this straightforward method provides a modular approach for the design of indigo-based materials with tailored optoelectronic properties.

A review on chemistry of a powerful organic electron acceptor 7, 7, 8, 8, tetracynoquinodimethane (TCNQ)

NASA Astrophysics Data System (ADS)

Singh, Yadunath

2018-05-01

Organic semiconductors have so far found extensive practical applications similar to inorganic semiconductors. Interest in these compounds has been stimulated by the synthesis of several powerful electron acceptors, such as tetracynoethylene (TCNE), 7, 7, 8, 8, tetracynoquinodimethane (TCNQ) and cyno-p-benzoquinone. In this connection TCNQ is of particular interest, due to presence of four powerful electron accepting groups in its molecule. Nucleophillic addition reactions, which are rarely encountered among unsaturated compounds, as well as addition reactions proceeding via a one electron transfer stage are characteristic of this substance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bose, A; Gardel, EJ; Vidoudez, C

Oxidation-reduction reactions underlie energy generation in nearly all life forms. Although most organisms use soluble oxidants and reductants, some microbes can access solid-phase materials as electron-acceptors or -donors via extracellular electron transfer. Many studies have focused on the reduction of solid-phase oxidants. Far less is known about electron uptake via microbial extracellular electron transfer, and almost nothing is known about the associated mechanisms. Here we show that the iron-oxidizing photoautotroph Rhodopseudomonas palustris TIE-1 accepts electrons from a poised electrode, with carbon dioxide as the sole carbon source/electron acceptor. Both electron uptake and ruBisCo form I expression are stimulated by light.more » Electron uptake also occurs in the dark, uncoupled from photosynthesis. Notably, the pioABC operon, which encodes a protein system essential for photoautotrophic growth by ferrous iron oxidation, influences electron uptake. These data reveal a previously unknown metabolic versatility of photoferrotrophs to use extracellular electron transfer for electron uptake.« less

Platinum nanoparticles functionalized nitrogen doped graphene platform for sensitive electrochemical glucose biosensing.

PubMed

Yang, Zhanjun; Cao, Yue; Li, Juan; Jian, Zhiqin; Zhang, Yongcai; Hu, Xiaoya

2015-04-29

In this work, we reported an efficient platinum nanoparticles functionalized nitrogen doped graphene (PtNPs@NG) nanocomposite for devising novel electrochemical glucose biosensor for the first time. The fabricated PtNPs@NG and biosensor were characterized using transmission electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, static water contact angle, UV-vis spectroscopy, electrochemical impedance spectra and cyclic voltammetry, respectively. PtNPs@NG showed large surface area and excellent biocompatibility, and enhanced the direct electron transfer between enzyme molecules and electrode surface. The glucose oxidase (GOx) immobilized on PtNPs@NG nanocomposite retained its bioactivity, and exhibited a surface controlled, quasi-reversible and fast electron transfer process. The constructed glucose biosensor showed wide linear range from 0.005 to 1.1mM with high sensitivity of 20.31 mA M(-1) cm(-2). The detection limit was calculated to be 0.002 mM at signal-to-noise of 3, which showed 20-fold decrease in comparison with single NG-based electrochemical biosensor for glucose. The proposed glucose biosensor also demonstrated excellent selectivity, good reproducibility, acceptable stability, and could be successfully applied in the detection of glucose in serum samples at the applied potential of -0.33 V. This research provided a promising biosensing platform for the development of excellent electrochemical biosensors. Copyright © 2015 Elsevier B.V. All rights reserved.

Accuracy and Efficiency of Recording Pediatric Early Warning Scores Using an Electronic Physiological Surveillance System Compared With Traditional Paper-Based Documentation.

PubMed

Sefton, Gerri; Lane, Steven; Killen, Roger; Black, Stuart; Lyon, Max; Ampah, Pearl; Sproule, Cathryn; Loren-Gosling, Dominic; Richards, Caitlin; Spinty, Jean; Holloway, Colette; Davies, Coral; Wilson, April; Chean, Chung Shen; Carter, Bernie; Carrol, E D

2017-05-01

Pediatric Early Warning Scores are advocated to assist health professionals to identify early signs of serious illness or deterioration in hospitalized children. Scores are derived from the weighting applied to recorded vital signs and clinical observations reflecting deviation from a predetermined "norm." Higher aggregate scores trigger an escalation in care aimed at preventing critical deterioration. Process errors made while recording these data, including plotting or calculation errors, have the potential to impede the reliability of the score. To test this hypothesis, we conducted a controlled study of documentation using five clinical vignettes. We measured the accuracy of vital sign recording, score calculation, and time taken to complete documentation using a handheld electronic physiological surveillance system, VitalPAC Pediatric, compared with traditional paper-based charts. We explored the user acceptability of both methods using a Web-based survey. Twenty-three staff participated in the controlled study. The electronic physiological surveillance system improved the accuracy of vital sign recording, 98.5% versus 85.6%, P < .02, Pediatric Early Warning Score calculation, 94.6% versus 55.7%, P < .02, and saved time, 68 versus 98 seconds, compared with paper-based documentation, P < .002. Twenty-nine staff completed the Web-based survey. They perceived that the electronic physiological surveillance system offered safety benefits by reducing human error while providing instant visibility of recorded data to the entire clinical team.

Computer simulation of heterogeneous polymer photovoltaic devices

NASA Astrophysics Data System (ADS)

Kodali, Hari K.; Ganapathysubramanian, Baskar

2012-04-01

Polymer-based photovoltaic devices have the potential for widespread usage due to their low cost per watt and mechanical flexibility. Efficiencies close to 9.0% have been achieved recently in conjugated polymer based organic solar cells (OSCs). These devices were fabricated using solvent-based processing of electron-donating and electron-accepting materials into the so-called bulk heterojunction (BHJ) architecture. Experimental evidence suggests that a key property determining the power-conversion efficiency of such devices is the final morphological distribution of the donor and acceptor constituents. In order to understand the role of morphology on device performance, we develop a scalable computational framework that efficiently interrogates OSCs to investigate relationships between the morphology at the nano-scale with the device performance. In this work, we extend the Buxton and Clarke model (2007 Modelling Simul. Mater. Sci. Eng. 15 13-26) to simulate realistic devices with complex active layer morphologies using a dimensionally independent, scalable, finite-element method. We incorporate all stages involved in current generation, namely (1) exciton generation and diffusion, (2) charge generation and (3) charge transport in a modular fashion. The numerical challenges encountered during interrogation of realistic microstructures are detailed. We compare each stage of the photovoltaic process for two microstructures: a BHJ morphology and an idealized sawtooth morphology. The results are presented for both two- and three-dimensional structures.

Building health information technology capacity: they may come but will they use it?

PubMed

Burke-Bebee, Suzie; Wilson, Marisa; Buckley, Kathleen M

2012-10-01

Medical errors remain a major safety problem more than a decade after the Institute of Medicine reported 98 000 related deaths occur yearly in US hospitals. Medication errors account for one-third of these errors. Although medication reconciliation is an accepted care standard for patient safety, little evidence is available to make practice recommendations for primary care. The purpose of this study was to evaluate the effectiveness of using secure e-mail alerts within the reconciliation process on patient medication safety in clinics where electronic and personal health records are used. A nonexperimental, descriptive design with a convenience sample of 62 patients from two Veterans Health Administration clinics was used. Patients received secure e-mail instructing them to review their online medication list, update it based on home medications, and bring it to the appointment for discussion with their provider. A retrospective chart review was conducted examining changes made to medication lists in the electronic record after reconciliation. Data revealed the organization's adoption of secure e-mail did not guarantee its meaningful use by providers and patients, a clear barrier to implementing technology as an adjunct to care in context of complex clinical processes such as medication reconciliation. Lessons learned from the project's implementation are discussed.

Integrating tobacco dependence counseling into electronic dental records: a multi-method approach.

PubMed

Rush, William A; Schleyer, Titus K L; Kirshner, Michael; Boyle, Raymond; Thoele, Merry Jo; Lenton, P A; Asche, Steve; Thyvalikakath, Thankam; Spallek, Heiko; Durand, Emily C; Enstad, Chris J; Huntley, Charles L; Rindal, D Brad

2014-01-01

Dentistry has historically seen tobacco dependence as a medical problem. As a consequence, dentistry has not adopted or developed effective interventions to deal with tobacco dependence. With the expanded use of electronic dental records, the authors identified an opportunity to incorporate standardized expert support for tobacco dependence counseling during the dental visit. Using qualitative results from observations and focus groups, a decision support system was designed that suggested discussion topics based on the patient's desire to quit and his or her level of nicotine addiction. Because dental providers are always pressed for time, the goal was a three-minute average intervention interval. To fulfill the provider's need for an easy way to track ongoing interventions, script usage was recorded. This process helped the provider track what he or she had said to the patient about tobacco dependence during previous encounters and to vary the messages. While the individual elements of the design process were not new, the combination of them proved to be very effective in designing a usable and accepted intervention. The heavy involvement of stakeholders in all components of the design gave providers and administrators ownership of the final product, which was ultimately adopted for use in all the clinics of a large dental group practice in Minnesota.

Photosensitive space charge limited current in screen printed CdTe thin films

NASA Astrophysics Data System (ADS)

Vyas, C. U.; Pataniya, Pratik; Zankat, Chetan K.; Patel, Alkesh B.; Pathak, V. M.; Patel, K. D.; Solanki, G. K.

2018-05-01

Group II-VI Compounds have emerged out as most suitable in the class of photo sensitive material. They represent a strong position in terms of their applications in the field of detectors as well as photo voltaic devices. Cadmium telluride is the prime member of this Group, because of high acceptance of this material as active component in opto-electronic devices. In this paper we report preparation and characterization of CdTe thin films by using a most economical screen printing technique in association with sintering at 510°C temperature. Surface morphology and smoothness are prime parameters of any deposited to be used as an active region of devices. Thus, we studied of the screen printed thin film by means of atomic force microscopy (AFM) and scanning electron microscopy (SEM) for this purpose. However, growth processes induced intrinsic defects in fabricated films work as charge traps and affect the conduction process significantly. So the conduction mechanism of deposited CdTe thin film is studied under dark as well as illuminated conditions. It is found that the deposited films showed the space charge limited conduction (SCLC) mechanism and hence various parameters of space charge limited conduction (SCLC) of CdTe film were evaluated and discussed and the photo responsive resistance is also presented in this paper.

The Process of Accepting Technology Innovation for Rural Teachers

ERIC Educational Resources Information Center

Cerovski, Jeremy

2016-01-01

In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

Synthesis and characterization of organic dyes with various electron-accepting substituents for p-type dye-sensitized solar cells.

PubMed

Weidelener, Martin; Powar, Satvasheel; Kast, Hannelore; Yu, Ze; Boix, Pablo P; Li, Chen; Müllen, Klaus; Geiger, Thomas; Kuster, Simon; Nüesch, Frank; Bach, Udo; Mishra, Amaresh; Bäuerle, Peter

2014-11-01

Four new donor-π-acceptor dyes differing in their acceptor group have been synthesized and employed as model systems to study the influence of the acceptor groups on the photophysical properties and in NiO-based p-type dye-sensitized solar cells. UV/Vis absorption spectra showed a broad range of absorption coverage with maxima between 331 and 653 nm. Redox potentials as well as HOMO and LUMO energies of the dyes were determined from cyclic voltammetry measurements and evaluated concerning their potential use as sensitizers in p-type dye-sensitized solar cells (p-DSCs). Quantum-chemical density functional theory calculations gave further insight into the frontier orbital distributions, which are relevant for the electronic processes in p-DSCs. In p-DSCs using an iodide/triiodide-based electrolyte, the polycyclic 9,10-dicyano-acenaphtho[1,2-b]quinoxaline (DCANQ) acceptor-containing dye gave the highest power conversion efficiency of 0.08%, which is comparable to that obtained with the perylenemonoimide (PMI)-containing dye. Interestingly, devices containing the DCANQ-based dye achieve a higher V(OC) of 163 mV compared to 158 mV for the PMI-containing dye. The result was further confirmed by impedance spectroscopic analysis showing higher recombination resistance and thus a lower recombination rate for devices containing the DCANQ dye than for PMI dye-based devices. However, the use of the strong electron-accepting tricyanofurane (TCF) group played a negative role in the device performance, yielding an efficiency of only 0.01% due to a low-lying LUMO energy level, thus resulting in an insufficient driving force for efficient dye regeneration. The results demonstrate that a careful molecular design with a proper choice of the acceptor unit is essential for development of sensitizers for p-DSCs. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Acceptance of shared decision making with reference to an electronic library of decision aids (arriba-lib) and its association to decision making in patients: an evaluation study.

PubMed

Hirsch, Oliver; Keller, Heidemarie; Krones, Tanja; Donner-Banzhoff, Norbert

2011-07-07

Decision aids based on the philosophy of shared decision making are designed to help patients make informed choices among diagnostic or treatment options by delivering evidence-based information on options and outcomes. A patient decision aid can be regarded as a complex intervention because it consists of several presumably relevant components. Decision aids have rarely been field tested to assess patients' and physicians' attitudes towards them. It is also unclear what effect decision aids have on the adherence to chosen options. The electronic library of decision aids (arriba-lib) to be used within the clinical encounter has a modular structure and contains evidence-based decision aids for the following topics: cardiovascular prevention, atrial fibrillation, coronary heart disease, oral antidiabetics, conventional and intensified insulin therapy, and unipolar depression. We conducted an evaluation study in which 29 primary care physicians included 192 patients. After the consultation, patients filled in questionnaires and were interviewed via telephone two months later. We used generalised estimation equations to measure associations within patient variables and traditional crosstab analyses. Patients were highly satisfied with arriba-lib and the process of shared decision making. Two-thirds of patients reached in the telephone interview wanted to be counselled again with arriba-lib. There was a high congruence between preferred and perceived decision making. Of those patients reached in the telephone interview, 80.7% said that they implemented the decision, independent of gender and education. Elderly patients were more likely to say that they implemented the decision. Shared decision making with our multi-modular electronic library of decision aids (arriba-lib) was accepted by a high number of patients. It has positive associations to general aspects of decision making in patients. It can be used for patient groups with a wide range of individual characteristics.

The role of physician characteristics in clinical trial acceptance: testing pathways of influence.

PubMed

Curbow, Barbara; Fogarty, Linda A; McDonnell, Karen A; Chill, Julia; Scott, Lisa Benz

2006-03-01

Eight videotaped vignettes were developed that assessed the effects of three physician-related experimental variables (in a 2 x 2 x 2 factorial design) on clinical trial (CT) knowledge, video knowledge, information processing, CT beliefs, affective evaluations (attitudes), and CT acceptance. It was hypothesized that the physician variables (community versus academic-based affiliation, enthusiastic versus neutral presentation of the trial, and new versus previous relationship with the patient) would serve as communication cues that would interrupt message processing, leading to lower knowledge gain but more positive beliefs, attitudes, and CT acceptance. A total of 262 women (161 survivors and 101 controls) participated in the study. The manipulated variables primarily influenced the intermediary variables of post-test CT beliefs and satisfaction with information rather than knowledge or information processing. Multiple regression results indicated that CT acceptance was associated with positive post-CT beliefs, a lower level of information processing, satisfaction with information, and control status. Based on these results, CT acceptance does not appear to be based on a rational decision-making model; this has implications for both the ethics of informed consent and research conceptual models.

"Why the hell do we need electronic health records?". EHR acceptance among physicians in private practice in Austria: a qualitative study.

PubMed

Hackl, W O; Hoerbst, A; Ammenwerth, E

2011-01-01

Progress in the medical sciences, together with related technologies, in the past has led to higher specialization and has created a strong need to exchange health information across institutional borders. The concept of electronic health records (EHR) was introduced to fulfill these needs. Remarkably, many EHR introduction projects ran into trouble, not least because they lacked the acceptance of EHR among physicians. Negative emotions, such as anxiety and fear due to a lack of information, may cause change barriers and hamper physicians' acceptance of such projects. The goal of this study was to gain deeper insight into the negative emotions related to the intended implementation of a mandatory national electronic health record system (called ELGA) in Austria among physicians in private practice. Qualitative, problem-centered interviews were conducted with eight physicians in private practice in the capital region of Tyrol. The methods of qualitative content analysis were used to analyze the data. Three hundred and twenty-eight passages in the interviews were selected, annotated, and paraphrased. These passages were assigned to 139 different primary categories. Finally, 18 main categories in the form of statements were derived. They were correlated and a theoretical model was formed to explain the genesis of the detected fears and anxiety related to the ELGA project. The results show that the physicians feel uninformed and snubbed. They fear unknown changes, increased costs, as well as workload and surveillance without obtaining any advantages from using electronic health records in their daily practice. Impartial information campaigns that are tailored to the physicians' needs and questions as along with a comprehensive cost-benefit analysis could benefit the physicians' opinion of EHRs.

Patient and provider perspectives on the design and implementation of an electronic consultation system for kidney care delivery in Canada: a focus group study.

PubMed

Bello, Aminu K; Molzahn, Anita E; Girard, Louis P; Osman, Mohamed A; Okpechi, Ikechi G; Glassford, Jodi; Thompson, Stephanie; Keely, Erin; Liddy, Clare; Manns, Braden; Jinda, Kailash; Klarenbach, Scott; Hemmelgarn, Brenda; Tonelli, Marcello

2017-03-02

We assessed stakeholder perceptions on the use of an electronic consultation system (e-Consult) to improve the delivery of kidney care in Alberta. We aim to identify acceptability, barriers and facilitators to the use of an e-Consult system for ambulatory kidney care delivery. This was a qualitative focus group study using a thematic analysis design. Eight focus groups were held in four locations in the province of Alberta, Canada. In total, there were 72 participants in two broad stakeholder categories: patients (including patients' relatives) and providers (including primary care physicians, nephrologists, other care providers and policymakers). The e-Consult system was generally acceptable across all stakeholder groups. The key barriers identified were length of time required for referring physicians to complete the e-Consult due to lack of integration with current electronic medical records, and concerns that increased numbers of requests might overwhelm nephrologists and lead to a delayed response or an unsustainable system. The key facilitators identified were potential improvement of care coordination, dissemination of best practice through an educational platform, comprehensive data to make decisions without the need for face-to-face consultation, timely feedback to primary care providers, timeliness/reduced delays for patients' rapid triage and identification of cases needing urgent care and improved access to information to facilitate decision-making in patient care. Stakeholder perceptions regarding the e-Consult system were favourable, and the key barriers and facilitators identified will be considered in design and implementation of an acceptable and sustainable electronic consultation system for kidney care delivery. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The impact of self-interviews on response patterns for sensitive topics: a randomized trial of electronic delivery methods for a sexual behaviour questionnaire in rural South Africa.

PubMed

Harling, Guy; Gumede, Dumile; Mutevedzi, Tinofa; McGrath, Nuala; Seeley, Janet; Pillay, Deenan; Bärnighausen, Till W; Herbst, Abraham J

2017-08-17

Self-interviews, where the respondent rather than the interviewer enters answers to questions, have been proposed as a way to reduce social desirability bias associated with interviewer-led interviews. Computer-assisted self-interviews (CASI) are commonly proposed since the computer programme can guide respondents; however they require both language and computer literacy. We evaluated the feasibility and acceptability of using electronic methods to administer quantitative sexual behaviour questionnaires in the Somkhele demographic surveillance area (DSA) in rural KwaZulu-Natal, South Africa. We conducted a four-arm randomized trial of paper-and-pen-interview, computer-assisted personal-interview (CAPI), CASI and audio-CASI with an age-sex-urbanicity stratified sample of 504 adults resident in the DSA in 2015. We compared respondents' answers to their responses to the same questions in previous surveillance rounds. We also conducted 48 cognitive interviews, dual-coding responses using the Framework approach. Three hundred forty (67%) individuals were interviewed and covariates and participation rates were balanced across arms. CASI and audio-CASI were significantly slower than interviewer-led interviews. Item non-response rates were higher in self-interview arms. In single-paper meta-analysis, self-interviewed individuals reported more socially undesirable sexual behaviours. Cognitive interviews found high acceptance of both self-interviews and the use of electronic methods, with some concerns that self-interview methods required more participant effort and literacy. Electronic data collection methods, including self-interview methods, proved feasible and acceptable for completing quantitative sexual behaviour questionnaires in a poor, rural South African setting. However, each method had both benefits and costs, and the choice of method should be based on context-specific criteria.

A clinical laboratory model for evaluating the acute effects of electronic "cigarettes": nicotine delivery profile and cardiovascular and subjective effects.

PubMed

Vansickel, Andrea R; Cobb, Caroline O; Weaver, Michael F; Eissenberg, Thomas E

2010-08-01

Electronic "cigarettes" are marketed to tobacco users as potential reduced exposure products (PREP), albeit with little information regarding electronic cigarette user toxicant exposure and effects. This information may be obtained by adapting clinical laboratory methods used to evaluate other PREPs for smokers. Thirty-two smokers participated in four independent Latin-square ordered conditions that differed by product: own brand cigarette, "NPRO" electronic cigarettes (NPRO EC; 18 mg cartridge), "Hydro" electronic cigarettes (Hydro EC; 16 mg cartridge), or sham (unlit cigarette). Participants took 10 puffs at two separate times during each session. Plasma nicotine and carbon monoxide (CO) concentration, heart rate, and subjective effects were assessed. Own brand significantly increased plasma nicotine and CO concentration and heart rate within the first five minutes of administration whereas NPRO EC, Hydro EC, and sham smoking did not. Own brand, NPRO EC, and Hydro EC (but not sham) significantly decreased tobacco abstinence symptom ratings and increased product acceptability ratings. The magnitude of symptom suppression and increased acceptability was greater for own brand than for NPRO EC and Hydro EC. Under these acute testing conditions, neither of the electronic cigarettes exposed users to measurable levels of nicotine or CO, although both suppressed nicotine/tobacco abstinence symptom ratings. This study illustrates how clinical laboratory methods can be used to understand the acute effects of these and other PREPs for tobacco users. The results and methods reported here will likely be relevant to the evaluation and empirically based regulation of electronic cigarettes and similar products. (c)2010 AACR.

An anticipative escape system for vehicles in water crashes

NASA Astrophysics Data System (ADS)

Shen, Chuanliang; Wang, Jiawei; Yin, Qi; Zhu, Yantao; Yang, Jiawei; Liao, Mengdi; Yang, Liming

2017-07-01

In this article, it designs an escape system for vehicles in water crashes. The structure mainly contains sensors, control organs and actuating mechanism for both doors and windows. Sensors judge whether the vehicle falls into water or is in the falling process. The actuating mechanism accepts the signal delivered by the control organs, then open the electronic central lock on doors and meanwhile lower the window. The water escape system is able to anticipate drowning situations for vehicles and controls both doors and windows in such an emergency. Under the premise of doors staying in an undamaged state, it is for sure that people in the vehicle can open the door while drowning in the water and safely escape.

Preliminary Results on Thermal Shock Behavior of CuZnAl Shape Memory Alloy Using a Solar Concentrator as Heating Source

NASA Astrophysics Data System (ADS)

Tudora, C.; Abrudeanu, M.; Stanciu, S.; Anghel, D.; Plaiaşu, G. A.; Rizea, V.; Ştirbu, I.; Cimpoeşu, N.

2018-06-01

It is highly accepted that martensitic transformation can be induced by temperature variation and by stress solicitation. Using a solar concentrator, we manage to increase the material surface temperature (till 573 respectively 873 K) in very short periods of time in order to analyze the material behavior under thermal shocks. The heating/cooling process was registered and analyzed during the experiments. Material surface was analyzed before and after thermal shocks by microstructure point of view using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The experiments follow the material behavior during fast heating and propose the possibility of activating smart materials using the sun heat for aerospace applications.

Biomedical data mining in clinical routine: expanding the impact of hospital information systems.

PubMed

Müller, Marcel; Markó, Kornel; Daumke, Philipp; Paetzold, Jan; Roesner, Arnold; Klar, Rüdiger

2007-01-01

In this paper we want to describe how the promising technology of biomedical data mining can improve the use of hospital information systems: a large set of unstructured, narrative clinical data from a dermatological university hospital like discharge letters or other dermatological reports were processed through a morpho-semantic text retrieval engine ("MorphoSaurus") and integrated with other clinical data using a web-based interface and brought into daily clinical routine. The user evaluation showed a very high user acceptance - this system seems to meet the clinicians' requirements for a vertical data mining in the electronic patient records. What emerges is the need for integration of biomedical data mining into hospital information systems for clinical, scientific, educational and economic reasons.

The use of electronic games in therapy: a review with clinical implications.

PubMed

Horne-Moyer, H Lynn; Moyer, Brian H; Messer, Drew C; Messer, Elizabeth S

2014-12-01

Therapists and patients enjoy and benefit from interventions that use electronic games (EG) in health care and mental health settings, with a variety of diagnoses and therapeutic goals. We reviewed the use of electronic games designed specifically for a therapeutic purpose, electronic games for psychotherapy (EGP), also called serious games, and commercially produced games used as an adjunct to psychotherapy, electronic games for entertainment (EGE). Recent research on the benefits of EG in rehabilitation settings, EGP, and EGE indicates that electronic methods are often equivalent to more traditional treatments and may be more enjoyable or acceptable, at least to some consumers. Methodological concerns include the lack of randomized controlled trials (RCT) for many applications. Suggestions are offered for using EG in therapeutic practice.

Cancer systems biology: signal processing for cancer research

PubMed Central

Yli-Harja, Olli; Ylipää, Antti; Nykter, Matti; Zhang, Wei

2011-01-01

In this editorial we introduce the research paradigms of signal processing in the era of systems biology. Signal processing is a field of science traditionally focused on modeling electronic and communications systems, but recently it has turned to biological applications with astounding results. The essence of signal processing is to describe the natural world by mathematical models and then, based on these models, develop efficient computational tools for solving engineering problems. Here, we underline, with examples, the endless possibilities which arise when the battle-hardened tools of engineering are applied to solve the problems that have tormented cancer researchers. Based on this approach, a new field has emerged, called cancer systems biology. Despite its short history, cancer systems biology has already produced several success stories tackling previously impracticable problems. Perhaps most importantly, it has been accepted as an integral part of the major endeavors of cancer research, such as analyzing the genomic and epigenomic data produced by The Cancer Genome Atlas (TCGA) project. Finally, we show that signal processing and cancer research, two fields that are seemingly distant from each other, have merged into a field that is indeed more than the sum of its parts. PMID:21439242

An approach to define semantics for BPM systems interoperability

NASA Astrophysics Data System (ADS)

Rico, Mariela; Caliusco, María Laura; Chiotti, Omar; Rosa Galli, María

2015-04-01

This article proposes defining semantics for Business Process Management systems interoperability through the ontology of Electronic Business Documents (EBD) used to interchange the information required to perform cross-organizational processes. The semantic model generated allows aligning enterprise's business processes to support cross-organizational processes by matching the business ontology of each business partner with the EBD ontology. The result is a flexible software architecture that allows dynamically defining cross-organizational business processes by reusing the EBD ontology. For developing the semantic model, a method is presented, which is based on a strategy for discovering entity features whose interpretation depends on the context, and representing them for enriching the ontology. The proposed method complements ontology learning techniques that can not infer semantic features not represented in data sources. In order to improve the representation of these entity features, the method proposes using widely accepted ontologies, for representing time entities and relations, physical quantities, measurement units, official country names, and currencies and funds, among others. When the ontologies reuse is not possible, the method proposes identifying whether that feature is simple or complex, and defines a strategy to be followed. An empirical validation of the approach has been performed through a case study.

Acceptance procedures for dense-graded mixes

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

Applying Electronic Medical Records in Health Care

PubMed Central

Abdekhoda, Mohammadhiwa; Dehnad, Afsaneh; Noruzi, Alireza; Gohari, Mahmodreza

2016-01-01

Summary Background In order to fulfill comprehensive interoperability and recognize the electronic medical records (EMRs’) benefits, physicians’ attitudes toward using and applying EMR must be recognized. Objectives The purpose of this study was to present an integrated model of applying EMRs by physicians. Methods This was a cross sectional study in which a sample of 330 physicians working in hospitals affiliated to the Tehran University of medical sciences (TUMS) was selected. Physicians’ attitudes toward using and accepting EMR in health care have been analyzed by an integrated model of two classical theories i.e. technology acceptance model (TAM) and diffusion of innovation (DOI). The model was tested using an empirical survey. The final model was tested by structural equation modeling (SEM) and represented by Analysis of Moment Structures (AMOS). Results The results suggest that the hybrid model explains about 43 percent of the variance of using and accepting of EMRs (R2=0.43). The findings also evidenced that Perceived Usefulness (PU), Perceived Ease of Use (PEOU), Relative Advantage, Compatibility, Complicatedness and Trainability have direct and significant effect on physicians’ attitudes toward using and accepting EMRs. But concerning observeability, significant path coefficient was not reported. Conclusions The integrated model supplies purposeful intuition for elucidates and anticipates of physicians’ behaviors in EMRs adoption. The study identified six relevant factors that affect using and applying EMRs that should be subsequently the major concern of health organizations and health policy makers. PMID:27437045

Acceptability of Using Electronic Vending Machines to Deliver Oral Rapid HIV Self-Testing Kits: A Qualitative Study

PubMed Central

Young, Sean D.; Daniels, Joseph; Chiu, ChingChe J.; Bolan, Robert K.; Flynn, Risa P.; Kwok, Justin; Klausner, Jeffrey D.

2014-01-01

Introduction Rates of unrecognized HIV infection are significantly higher among Latino and Black men who have sex with men (MSM). Policy makers have proposed that HIV self-testing kits and new methods for delivering self-testing could improve testing uptake among minority MSM. This study sought to conduct qualitative assessments with MSM of color to determine the acceptability of using electronic vending machines to dispense HIV self-testing kits. Materials and Methods African American and Latino MSM were recruited using a participant pool from an existing HIV prevention trial on Facebook. If participants expressed interest in using a vending machine to receive an HIV self-testing kit, they were emailed a 4-digit personal identification number (PIN) code to retrieve the test from the machine. We followed up with those who had tested to assess their willingness to participate in an interview about their experience. Results Twelve kits were dispensed and 8 interviews were conducted. In general, participants expressed that the vending machine was an acceptable HIV test delivery method due to its novelty and convenience. Discussion Acceptability of this delivery model for HIV testing kits was closely associated with three main factors: credibility, confidentiality, and convenience. Future research is needed to address issues, such as user-induced errors and costs, before scaling up the dispensing method. PMID:25076208

Electronic Health Record for Intensive Care based on Usual Windows Based Software.

PubMed

Reper, Arnaud; Reper, Pascal

2015-08-01

In Intensive Care Units, the amount of data to be processed for patients care, the turn over of the patients, the necessity for reliability and for review processes indicate the use of Patient Data Management Systems (PDMS) and electronic health records (EHR). To respond to the needs of an Intensive Care Unit and not to be locked with proprietary software, we developed an EHR based on usual software and components. The software was designed as a client-server architecture running on the Windows operating system and powered by the access data base system. The client software was developed using Visual Basic interface library. The application offers to the users the following functions: medical notes captures, observations and treatments, nursing charts with administration of medications, scoring systems for classification, and possibilities to encode medical activities for billing processes. Since his deployment in September 2004, the EHR was used to care more than five thousands patients with the expected software reliability and facilitated data management and review processes. Communications with other medical software were not developed from the start, and are realized by the use of basic functionalities communication engine. Further upgrade of the system will include multi-platform support, use of typed language with static analysis, and configurable interface. The developed system based on usual software components was able to respond to the medical needs of the local ICU environment. The use of Windows for development allowed us to customize the software to the preexisting organization and contributed to the acceptability of the whole system.

Open source electronic health record and patient data management system for intensive care.

PubMed

Massaut, Jacques; Reper, Pascal

2008-01-01

In Intensive Care Units, the amount of data to be processed for patients care, the turn over of the patients, the necessity for reliability and for review processes indicate the use of Patient Data Management Systems (PDMS) and electronic health records (EHR). To respond to the needs of an Intensive Care Unit and not to be locked with proprietary software, we developed a PDMS and EHR based on open source software and components. The software was designed as a client-server architecture running on the Linux operating system and powered by the PostgreSQL data base system. The client software was developed in C using GTK interface library. The application offers to the users the following functions: medical notes captures, observations and treatments, nursing charts with administration of medications, scoring systems for classification, and possibilities to encode medical activities for billing processes. Since his deployment in February 2004, the PDMS was used to care more than three thousands patients with the expected software reliability and facilitated data management and review processes. Communications with other medical software were not developed from the start, and are realized by the use of the Mirth HL7 communication engine. Further upgrade of the system will include multi-platform support, use of typed language with static analysis, and configurable interface. The developed system based on open source software components was able to respond to the medical needs of the local ICU environment. The use of OSS for development allowed us to customize the software to the preexisting organization and contributed to the acceptability of the whole system.

Electron Beam Welding of Duplex Steels with using Heat Treatment

NASA Astrophysics Data System (ADS)

Schwarz, Ladislav; Vrtochová, Tatiana; Ulrich, Koloman

2010-01-01

This contribution presents characteristics, metallurgy and weldability of duplex steels with using concentrated energy source. The first part of the article describes metallurgy of duplex steels and the influence of nitrogen on their solidification. The second part focuses on weldability of duplex steels with using electron beam aimed on acceptable structure and corrosion resistance performed by multiple runs of defocused beam over the penetration weld.

Development of a Hand Held Thromboelastograph

DTIC Science & Technology

2015-01-01

documents will be referenced during the Entegrion PCM System design, verification and validation activities. EN 61010 -1:2010 (Edition3.0) Safety...requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements. EN 61010 -2-101:2002 Safety...IPC-A-610E Acceptability of Electronic Assemblies IPC 7711/21B Rework, Modification and Repair of Electronic Assemblies. IEC 62304:2006/AC:2008

p-Type semiconducting nickel oxide as an efficiency-enhancing anodal interfacial layer in bulk heterojunction solar cells

DOEpatents

Irwin, Michael D; Buchholz, Donald B; Marks, Tobin J; Chang, Robert P. H.

2014-11-25

The present invention, in one aspect, relates to a solar cell. In one embodiment, the solar cell includes an anode, a p-type semiconductor layer formed on the anode, and an active organic layer formed on the p-type semiconductor layer, where the active organic layer has an electron-donating organic material and an electron-accepting organic material.

Integrating a Hand Held computer and Stethoscope into a Fetal Monitor

PubMed Central

Ahmad Soltani, Mitra

2009-01-01

This article presents procedures for modifying a hand held computer or personal digital assistant (PDA) into a versatile device functioning as an electronic stethoscope for fetal monitoring. Along with functioning as an electronic stethoscope, a PDA can provide a useful information source for a medical trainee. Feedback from medical students, residents and interns suggests the device is well accepted by medical trainees. PMID:20165517

Carbon dioxide electron cooling rates in the atmospheres of Mars and Venus

NASA Astrophysics Data System (ADS)

Campbell, L.; Brunger, M. J.; Rescigno, T. N.

2008-08-01

The cooling of electrons in collisions with carbon dioxide in the atmospheres of Venus and Mars is investigated. Calculations are performed with both previously accepted electron energy transfer rates and with new ones determined using more recent theoretical and experimental cross sections for electron impact on CO2. Emulation of a previous model for Venus confirms the validity of the current model and shows that use of the updated cross sections leads to cooling rates that are lower by one third. Application of the same model to the atmosphere of Mars gives more than double the previous cooling rates at altitudes where the electron temperature is very low.

Self-acceptance of stuttering: A preliminary study.

PubMed

De Nardo, Thales; Gabel, Rodney M; Tetnowski, John A; Swartz, Eric R

2016-01-01

This study explored the relationship between self-acceptance of stuttering and (1) psychosocial factors (self-esteem, hostility towards others, emotional support, and perceived discrimination); (2) treatment history (support group participation, therapy duration, and perceived therapy success); and (3) previously reported variables in self-acceptance of stuttering, which include age and stuttering severity. Participants were 80 adults who stutter who were recruited with assistance from the National Stuttering Association and Board Certified Specialists in Fluency Disorders. Participants completed an electronic survey composed of an acceptance of stuttering scale, psychosocial scales, and a participant information questionnaire. Statistical analysis identified significant correlations between participants' reports of self-acceptance of stuttering and self-esteem, perceived discrimination, hostility towards others, and perceived therapy outcome. Self-esteem was positively correlated with self-acceptance, while hostility towards others and perceived discrimination was negatively correlated with self-acceptance. Participants who perceived their therapy outcome to be successful were significantly more likely to report higher levels of self-acceptance. No significant relationships were found between self-acceptance of stuttering and support group participation, emotional support, stuttering severity, and participant age. This exploratory investigation has provided a foundation for future studies on the self-acceptance of stuttering. The findings indicate common psychosocial variables in self-acceptance of stuttering and of other disabilities. The significant relationships between self-acceptance of stuttering and psychosocial and therapeutic variables found need to be further explored to identify its causalities and clinical implications. The reader will be able to (1) discuss the importance of assessing self-acceptance of stuttering, (2) summarize the literature on self-acceptance of disability, and (3) describe the significant findings related to self-acceptance of stuttering and psychosocial, therapeutic variables. Copyright © 2016 Elsevier Inc. All rights reserved.

Quality by design for herbal drugs: a feedforward control strategy and an approach to define the acceptable ranges of critical quality attributes.

PubMed

Yan, Binjun; Li, Yao; Guo, Zhengtai; Qu, Haibin

2014-01-01

The concept of quality by design (QbD) has been widely accepted and applied in the pharmaceutical manufacturing industry. There are still two key issues to be addressed in the implementation of QbD for herbal drugs. The first issue is the quality variation of herbal raw materials and the second issue is the difficulty in defining the acceptable ranges of critical quality attributes (CQAs). To propose a feedforward control strategy and a method for defining the acceptable ranges of CQAs for the two issues. In the case study of the ethanol precipitation process of Danshen (Radix Salvia miltiorrhiza) injection, regression models linking input material attributes and process parameters to CQAs were built first and an optimisation model for calculating the best process parameters according to the input materials was established. Then, the feasible material space was defined and the acceptable ranges of CQAs for the previous process were determined. In the case study, satisfactory regression models were built with cross-validated regression coefficients (Q(2) ) all above 91 %. The feedforward control strategy was applied successfully to compensate the quality variation of the input materials, which was able to control the CQAs in the 90-110 % ranges of the desired values. In addition, the feasible material space for the ethanol precipitation process was built successfully, which showed the acceptable ranges of the CQAs for the concentration process. The proposed methodology can help to promote the implementation of QbD for herbal drugs. Copyright © 2013 John Wiley & Sons, Ltd.

Cognitive and Emotion Regulation Change Processes in Cognitive Behavioural Therapy for Social Anxiety Disorder.

PubMed

O'Toole, Mia S; Mennin, Douglas S; Hougaard, Esben; Zachariae, Robert; Rosenberg, Nicole K

2015-01-01

The objective of the study was to investigate variables, derived from both cognitive and emotion regulation conceptualizations of social anxiety disorder (SAD), as possible change processes in cognitive behaviour therapy (CBT) for SAD. Several proposed change processes were investigated: estimated probability, estimated cost, safety behaviours, acceptance of emotions, cognitive reappraisal and expressive suppression. Participants were 50 patients with SAD, receiving a standard manualized CBT program, conducted in groups or individually. All variables were measured pre-therapy, mid-therapy and post-therapy. Lower level mediation models revealed that while a change in most process measures significantly predicted clinical improvement, only changes in estimated probability and cost and acceptance of emotions showed significant indirect effects of CBT for SAD. The results are in accordance with previous studies supporting the mediating role of changes in cognitive distortions in CBT for SAD. In addition, acceptance of emotions may also be a critical component to clinical improvement in SAD during CBT, although more research is needed on which elements of acceptance are most helpful for individuals with SAD. The study's lack of a control condition limits any conclusion regarding the specificity of the findings to CBT. Change in estimated probability and cost, and acceptance of emotions showed an indirect effect of CBT for SAD. Cognitive distortions appear relevant to target with cognitive restructuring techniques. Finding acceptance to have an indirect effect could be interpreted as support for contemporary CBT approaches that include acceptance-based strategies. Copyright © 2014 John Wiley & Sons, Ltd.

Time And Temperature Dependent Micromechanical Properties Of Solder Joints For 3D-Package Integration

NASA Astrophysics Data System (ADS)

Roellig, Mike; Meier, Karsten; Metasch, Rene

2010-11-01

The recent development of 3D-integrated electronic packages is characterized by the need to increase the diversity of functions and to miniaturize. Currently many 3D-integration concepts are being developed and all of them demand new materials, new designs and new processing technologies. The combination of simulation and experimental investigation becomes increasingly accepted since simulations help to shorten the R&D cycle time and reduce costs. Numerical calculations like the Finite-Element-Method are strong tools to calculate stress conditions in electronic packages resulting from thermal strains due to the manufacturing process and environmental loads. It is essential for the application of numerical calculations that the material data is accurate and describes sufficiently the physical behaviour. The developed machine allows the measurement of time and temperature dependent micromechanical properties of solder joints. Solder joints, which are used to mechanically and electrically connect different packages, are physically measured as they leave the process. This allows accounting for process influences, which may change material properties. Additionally, joint sizes and metallurgical interactions between solder and under bump metallization can be respected by this particular measurement. The measurement allows the determination of material properties within a temperature range of 20° C-200° C. Further, the time dependent creep deformation can be measured within a strain-rate range of 10-31/s-10-81/s. Solder alloys based on Sn-Ag/Sn-Ag-Cu with additionally impurities and joint sizes down to O/ 200 μm were investigated. To finish the material characterization process the material model coefficient were extracted by FEM-Simulation to increase the accuracy of data.

Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications

NASA Astrophysics Data System (ADS)

Zhong, Yuan; Rännar, Lars-Erik; Liu, Leifeng; Koptyug, Andrey; Wikman, Stefan; Olsen, Jon; Cui, Daqing; Shen, Zhijian

2017-04-01

A feasibility study was performed to fabricate ITER In-Vessel components by one of the metal additive manufacturing methods, Electron Beam Melting® (EBM®). Solid specimens of SS316L with 99.8% relative density were prepared from gas atomized precursor powder granules. After the EBM® process the phase remains as austenite and the composition has practically not been changed. The RCC-MR code used for nuclear pressure vessels provides guidelines for this study and tensile tests and Charpy-V tests were carried out at 22 °C (RT) and 250 °C (ET). This work provides the first set of mechanical and microstructure data of EBM® SS316L for nuclear fusion applications. The mechanical testing shows that the yield strength, ductility and toughness are well above the acceptance criteria and only the ultimate tensile strength of EBM® SS316L is below the RCC-MR code. Microstructure characterizations reveal the presence of hierarchical structures consisting of solidified melt pools, columnar grains and irregular shaped sub-grains. Lots of precipitates enriched in Cr and Mo are observed at columnar grain boundaries while no sign of element segregation is shown at the sub-grain boundaries. Such a unique microstructure forms during a non-equilibrium process, comprising rapid solidification and a gradient 'annealing' process due to anisotropic thermal flow of accumulated heat inside the powder granule matrix. Relations between process parameters, specimen geometry (total building time) and sub-grain structure are discussed. Defects are formed mainly due to the large layer thickness (100 μm) which generates insufficient bonding between a few of the adjacently formed melt pools during the process. Further studies should focus on adjusting layer thickness to improve the strength of EBM® SS316L and optimizing total building time.

Acceptance procedures for dense-graded mixes : literature review.

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

77 FR 26038 - Alaska Native Claims Selection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... transmitted by electronic means, such as facsimile or email, will not be accepted as timely filed. Parties who... . Persons who use a Telecommunications Device for the Deaf (TDD) may call the Federal Information Relay...

Molecular engineering of phosphole-based conjugated materials

NASA Astrophysics Data System (ADS)

Ren, Yi

The work in this thesis focuses on the molecular engineering of phosphorus-based conjugated materials. In the first part (Chapters Two and Three), new phosphorus-based conjugated systems were designed and synthesized to study the effect of the heteroelement on the electronic properties of the π-conjugated systems. The second part (Chapters Four and Five) deals with the self-assembly features of specifically designed phosphorus-based conjugated systems. In Chapter Two, electron-poor and electron-rich aromatic substituents were introduced to the dithienophosphole core in order to balance the electron-accepting and electron-donating character of the systems. Furthermore, an intriguing intramolecular charge transfer process could be observed between two dithienophosphole cores in a bridged bisphosphole-system. In Chapter Three, a secondary heteroelement (Si, P, S) was incorporated in the phosphorus-based conjugated systems. Extensive structure-property studies revealed that the secondary heteroelement can effectively manipulate the communication in phosphinine-based systems. The study of a heterotetracene system allowed for selectively applying distinct heteroatom (S/P) chemistries, which offers a powerful tool for the modification of the electronic structure of the system. More importantly, the heteroatom-specific electronic nature (S/P) can be utilized to selectively control different photophysical aspects (energy gap and fluorescence quantum yield). Furthermore, additional molecular engineering of the heterotetracene provided access to well-defined 1D microstructures, which opened the door for designing multi-functional self-assembled phosphorus-based materials. In Chapter Four, the self-organizing phosphole-lipid system is introduced, which combines the features of phospholipids with the electronics of phospholes. Its amphiphilic nature induces intriguing self-assembly features - liquid crystal and soft crystal architectures, both exhibiting well-organized lamellar structure at a wide range of temperatures. Importantly, its dynamic structure endows the phosphole-lipid system with intriguing external stimuli-responsive features allowing for the modification of the emission of the system without further chemical modification. Chapter Five describes how further molecular engineering allowed for access to a series of new highly fluorescent phosphole-lipid organogels. Remarkably, the external-stimuli responsive features of the system can be amplified in a donor-acceptor system accessible through changes in long distance fluorescence resonance energy transfer processes. In addition, the first fluorescent liquid phospholes could also be accessed in the context of the work on the new phosphole-lipid system.