Electronic symptom reporting between patient and provider for improved health care service quality: a systematic review of randomized controlled trials. part 1: state of the art.

PubMed

Johansen, Monika Alise; Henriksen, Eva; Horsch, Alexander; Schuster, Tibor; Berntsen, Gro K Rosvold

2012-10-03

Over the last two decades, the number of studies on electronic symptom reporting has increased greatly. However, the field is very heterogeneous: the choices of patient groups, health service innovations, and research targets seem to involve a broad range of foci. To move the field forward, it is necessary to build on work that has been done and direct further research to the areas holding most promise. Therefore, we conducted a comprehensive review of randomized controlled trials (RCTs) focusing on electronic communication between patient and provider to improve health care service quality, presented in two parts. Part 2 investigates the methodological quality and effects of the RCTs, and demonstrates some promising benefits of electronic symptom reporting. To give a comprehensive overview of the most mature part of this emerging field regarding (1) patient groups, (2) health service innovations, and (3) research targets relevant to electronic symptom reporting. We searched Medline, EMBASE, PsycINFO, Cochrane Central Register of Controlled Trials, and IEEE Xplore for original studies presented in English-language articles published from 1990 to November 2011. Inclusion criteria were RCTs of interventions where patients or parents reported health information electronically to the health care system for health care purposes and were given feedback. Of 642 records identified, we included 32 articles representing 29 studies. The included articles were published from 2002, with 24 published during the last 5 years. The following five patient groups were represented: respiratory and lung diseases (12 studies), cancer (6), psychiatry (6), cardiovascular (3), and diabetes (1). In addition to these, 1 study had a mix of three groups. All included studies, except 1, focused on long-term conditions. We identified four categories of health service innovations: consultation support (7 studies), monitoring with clinician support (12), self-management with clinician support (9), and therapy (1). Most of the research (21/29, 72%) was conducted within four combinations: consultation support innovation in the cancer group (5/29, 17%), monitoring innovation in the respiratory and lung diseases group (8/29, 28%), and self-management innovations in psychiatry (4/29, 14%) and in the respiratory and lung diseases group (4/29, 14%). Research targets in the consultation support studies focused on increased patient centeredness, while monitoring and self-management mainly aimed at documenting health benefits. All except 1 study aiming for reduced health care costs were in the monitoring group. RCT-based research on electronic symptom reporting has developed enormously since 2002. Research including additional patient groups or new combinations of patient groups with the four identified health service innovations can be expected in the near future. We suggest that developing a generic model (not diagnosis specific) for electronic patient symptom reporting for long-term conditions may benefit the field.

Electronic Symptom Reporting Between Patient and Provider for Improved Health Care Service Quality: A Systematic Review of Randomized Controlled Trials. Part 1: State of the Art

PubMed Central

Henriksen, Eva; Horsch, Alexander; Schuster, Tibor; Berntsen, Gro K Rosvold

2012-01-01

Background Over the last two decades, the number of studies on electronic symptom reporting has increased greatly. However, the field is very heterogeneous: the choices of patient groups, health service innovations, and research targets seem to involve a broad range of foci. To move the field forward, it is necessary to build on work that has been done and direct further research to the areas holding most promise. Therefore, we conducted a comprehensive review of randomized controlled trials (RCTs) focusing on electronic communication between patient and provider to improve health care service quality, presented in two parts. Part 2 investigates the methodological quality and effects of the RCTs, and demonstrates some promising benefits of electronic symptom reporting. Objective To give a comprehensive overview of the most mature part of this emerging field regarding (1) patient groups, (2) health service innovations, and (3) research targets relevant to electronic symptom reporting. Methods We searched Medline, EMBASE, PsycINFO, Cochrane Central Register of Controlled Trials, and IEEE Xplore for original studies presented in English-language articles published from 1990 to November 2011. Inclusion criteria were RCTs of interventions where patients or parents reported health information electronically to the health care system for health care purposes and were given feedback. Results Of 642 records identified, we included 32 articles representing 29 studies. The included articles were published from 2002, with 24 published during the last 5 years. The following five patient groups were represented: respiratory and lung diseases (12 studies), cancer (6), psychiatry (6), cardiovascular (3), and diabetes (1). In addition to these, 1 study had a mix of three groups. All included studies, except 1, focused on long-term conditions. We identified four categories of health service innovations: consultation support (7 studies), monitoring with clinician support (12), self-management with clinician support (9), and therapy (1). Most of the research (21/29, 72%) was conducted within four combinations: consultation support innovation in the cancer group (5/29, 17%), monitoring innovation in the respiratory and lung diseases group (8/29, 28%), and self-management innovations in psychiatry (4/29, 14%) and in the respiratory and lung diseases group (4/29, 14%). Research targets in the consultation support studies focused on increased patient centeredness, while monitoring and self-management mainly aimed at documenting health benefits. All except 1 study aiming for reduced health care costs were in the monitoring group. Conclusion RCT-based research on electronic symptom reporting has developed enormously since 2002. Research including additional patient groups or new combinations of patient groups with the four identified health service innovations can be expected in the near future. We suggest that developing a generic model (not diagnosis specific) for electronic patient symptom reporting for long-term conditions may benefit the field. PMID:23032300

Using focus groups to develop interventions to promote colorectal cancer screening among Vietnamese Americans.

PubMed

Nguyen, Bang H; Vo, Phuong H; Doan, Hiep T; McPhee, Stephen J

2006-01-01

Colorectal cancer is the third most common cancer in Vietnamese Americans. Their colorectal screening rates are lower than the rates of whites. Four focus groups were conducted to identify Vietnamese American sources and credibility of health information, media utilization, and intervention approaches. Vietnamese Americans trusted doctors and patient testimonials and had access to, and received most of their health information from, Vietnamese- language print and electronic media. Recommended intervention approaches include promoting doctors' recommendation of screening and using Vietnamese-language mass media, print materials, and oral presentations. Focus groups are useful in determining communication channels and intervention approaches.

Patients' experiences when accessing their on-line electronic patient records in primary care.

PubMed Central

Pyper, Cecilia; Amery, Justin; Watson, Marion; Crook, Claire

2004-01-01

BACKGROUND: Patient access to on-line primary care electronic patient records is being developed nationally. Knowledge of what happens when patients access their electronic records is poor. AIM: To enable 100 patients to access their electronic records for the first time to elicit patients' views and to understand their requirements. DESIGN OF STUDY: In-depth interviews using semi-structured questionnaires as patients accessed their electronic records, plus a series of focus groups. SETTING: Secure facilities for patients to view their primary care records privately. METHOD: One hundred patients from a randomised group viewed their on-line electronic records for the first time. The questionnaire and focus groups addressed patients' views on the following topics: ease of use; confidentiality and security; consent to access; accuracy; printing records; expectations regarding content; exploitation of electronic records; receiving new information and bad news. RESULTS: Most patients found the computer technology used acceptable. The majority found viewing their record useful and understood most of the content, although medical terms and abbreviations required explanation. Patients were concerned about security and confidentiality, including potential exploitation of records. They wanted the facility to give informed consent regarding access and use of data. Many found errors, although most were not medically significant. Many expected more detail and more information. Patients wanted to add personal information. CONCLUSION: Patients have strong views on what they find acceptable regarding access to electronic records. Working in partnership with patients to develop systems is essential to their success. Further work is required to address legal and ethical issues of electronic records and to evaluate their impact on patients, health professionals and service provision. PMID:14965405

Web Site Design Benchmarking within Industry Groups.

ERIC Educational Resources Information Center

Kim, Sung-Eon; Shaw, Thomas; Schneider, Helmut

2003-01-01

Discussion of electronic commerce focuses on Web site evaluation criteria and applies them to different industry groups in Korea. Defines six categories of Web site evaluation criteria: business function, corporate credibility, contents reliability, Web site attractiveness, systematic structure, and navigation; and discusses differences between…

Fellows' Perceptions of a Mandatory Reflective Electronic Portfolio in a Geriatric Medicine Fellowship Program

ERIC Educational Resources Information Center

Ruiz, Jorge G.; Qadri, Syeda S.; Karides, Marina; Castillo, Carmen; Milanez, Marcos; Roos, Bernard A.

2009-01-01

Electronic portfolios (ePortfolios) can be useful for evaluating and documenting mastery of competencies. We investigated geriatric medicine fellows' perceptions of an ePortfolio. We conducted surveys and focus groups followed by quantitative and qualitative data analysis. Our study revealed that fellows considered the ePortfolio acceptable and…

Recent advances in self-assembled monolayers based biomolecular electronic devices.

PubMed

Arya, Sunil K; Solanki, Pratima R; Datta, Monika; Malhotra, Bansi D

2009-05-15

Self-assembled monolayers (SAMs) have aroused much interest due to their potential applications in biosensors, biomolecular electronics and nanotechnology. This has been largely attributed to their inherent ordered arrangement and controllable properties. SAMs can be formed by chemisorption of organic molecules containing groups like thiols, disulphides, amines, acids or silanes, on desired surfaces and can be used to fabricate biomolecular electronic devices. We focus on recent applications of organosulphur compounds (thiols) based SAMs to biomolecular electronic devices in the last about 3 years.

Tweens' Characterization of Digital Technologies

ERIC Educational Resources Information Center

Brito, Pedro Quelhas

2012-01-01

The tweens are a transitional age group undergoing deep physical and psychological transformations. Based on a thirteen-focus group research design involving 103 students, and applying a tweens-centered approach, the characteristics of SMS, IM, Internet, digital photos, electronic games, and email were analyzed. Categories such as moral issues,…

The Tie that Binds: Building Discourse Communities and Group Cohesion through Computer-Based Conferences.

ERIC Educational Resources Information Center

Selfe, Cynthia L.; Eilola, J. Daniel

1988-01-01

Discussion of the use of electronic conferencing to form a discourse community focuses on a case study of student consultants working in a microcomputer lab supporting writing courses at Michigan Technological University. The formulation of a group identity, as well as group values, goals, and expectations are discussed. (16 references) (LRW)

Using Word Clouds to Develop Proactive Learners

ERIC Educational Resources Information Center

Miley, Frances; Read, Andrew

2011-01-01

This article examines student responses to a technique for summarizing electronically available information based on word frequency. Students used this technique to create word clouds, using those word clouds to enhance personal and small group study. This is a qualitative study. Small focus groups were used to obtain student feedback. Feedback…

Topological phases protected by point group symmetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Hao; Huang, Sheng -Jie; Fu, Liang

We consider symmetry-protected topological (SPT) phases with crystalline point group symmetry, dubbed point group SPT (pgSPT) phases. We show that such phases can be understood in terms of lower-dimensional topological phases with on-site symmetry and that they can be constructed as stacks and arrays of these lower-dimensional states. This provides the basis for a general framework to classify and characterize bosonic and fermionic pgSPT phases, which can be applied for arbitrary crystalline point group symmetry and in arbitrary spatial dimensions. We develop and illustrate this framework by means of a few examples, focusing on three-dimensional states. We classify bosonic pgSPTmore » phases and fermionic topological crystalline superconductors with Z P 2 (reflection) symmetry, electronic topological crystalline insulators (TCIs) with U(1)×Z P 2 symmetry, and bosonic pgSPT phases with C 2v symmetry, which is generated by two perpendicular mirror reflections. We also study surface properties, with a focus on gapped, topologically ordered surface states. For electronic TCIs, we find a Z 8 × Z 2 classification, where the Z 8 corresponds to known states obtained from noninteracting electrons, and the Z 2 corresponds to a “strongly correlated” TCI that requires strong interactions in the bulk. Lastly, our approach may also point the way toward a general theory of symmetry-enriched topological phases with crystalline point group symmetry.« less

Two-photon or higher-order absorbing optical materials and methods of use

NASA Technical Reports Server (NTRS)

Marder, Seth (Inventor); Perry, Joseph (Inventor)

2012-01-01

Compositions capable of simultaneous two-photon absorption and higher order absorptivities are provided. Compounds having a donor-pi-donor or acceptor-pi-acceptor structure are of particular interest, where the donor is an electron donating group, acceptor is an electron accepting group, and pi is a pi bridge linking the donor and/or acceptor groups. The pi bridge may additionally be substituted with electron donating or withdrawing groups to alter the absorptive wavelength of the structure. Also disclosed are methods of generating an excited state of such compounds through optical stimulation with light using simultaneous absorption of photons of energies individually insufficient to achieve an excited state of the compound, but capable of doing so upon simultaneous absorption of two or more such photons. Applications employing such methods are also provided, including controlled polymerization achieved through focusing of the light source(s) used.

Acenes, Heteroacenes and Analogous Molecules for Organic Photovoltaic and Field Effect Transistor Applications

NASA Astrophysics Data System (ADS)

Granger, Devin Benjamin

Polycyclic aromatic hydrocarbons composed of benzenoid rings fused in a linear fashion comprise the class of compounds known as acenes. The structures containing three to six ring fusions are brightly colored and possess band gaps and charge transport efficiencies sufficient for semiconductor applications. These molecules have been investigated throughout the past several decades to assess their optoelectronic properties. The absorption, emission and charge transport properties of this series of molecules has been studied extensively to elucidate structure-property relationships. A wide variety of analogous molecules, incorporating heterocycles in place of benzenoid rings, demonstrate similar properties to the parent compounds and have likewise been investigated. Functionalization of acene compounds by placement of groups around the molecule affects the way in which molecules interact in the solid state, in addition to the energetics of the molecule. The use of electron donating or electron withdrawing groups affects the frontier molecular orbitals and thus affects the optical and electronic gaps of the molecules. The use of bulky side groups such as alkylsilylethynyl groups allows for crystal engineering of molecular aggregates, and changing the volume and dimensions of the alkylsilyl groups affects the intermolecular interactions and thus changes the packing motif. In chapter 2, a series of tetracene and pentacene molecules with strongly electron withdrawing groups is described. The investigation focuses on the change in energetics of the frontier molecular orbitals between the base acene and the nitrile and dicyanovinyl derivatives as well as the differences between the pentacene and tetracene molecules. The differences in close packing motifs through use of bulky alkylsilylethynyl groups is also discussed in relation to electron acceptor material design and bulk heterojunction organic photovoltaic characteristics. Chapter 3 focuses on molecular acceptor and donor molecules for bulk heterojunction organic photovoltaics based on anthrathiophene and benzo[1,2-b:4,5-b']dithiophene central units like literature molecules containing fluorene and dithieno[2,3-b:2',3'-d]silole cores. The synthetic strategies of developing reduced symmetry benzo[1,2-b:4,5-b']dithiophene to study the effect of substitution around the central unit is also described. The optical and electronic properties of the donors and acceptors are described along with the performance and characteristics of devices employing these molecules. The final two data chapters focus on new nitrogen containing polycyclic hydrocarbons containing indolizine and (2.2.2) cyclazine units. The optical, electronic and other physical properties of these molecules are explored, in addition to the synthetic strategies for incorporating the indolizine and cyclazine units. By use of alkylsilylethynyl groups, crystal engineering was investigated for the benzo[2,3-b:5,6-b']diindolizine chromophore described in chapter 4 to target the 2-D "brick-work" packing motif for application in field effect transistor devices. Optical and electronic properties of the cyclazine end-capped acene molecules described in chapter 5 were investigated and described in relation to the base acene molecules. In both cases, density functional theory calculations were conducted to better understand unexpected optical properties of these molecules, which are like the linear acene series despite the non-linear attachment.

Development of refractive X-ray focusing optics at Diamond Light Source

NASA Astrophysics Data System (ADS)

Alianelli, L.; Sawhney, K. J. S.; Loader, I. M.; Jenkins, D. W. K.; Stevens, R.; Snigirev, A.; Snigireva, I.

2007-09-01

The Diamond Optics & Metrology Group and the collaborators at the STFC Central Microstructure Facility have initiated a program for the design and fabrication of in-line micro- and nano-focusing optics for synchrotron radiation beamlines. The first type of optics fabricated is a kinoform lens in silicon on the same model proposed by K. Evans- Lutterodt et al [Opt. Expr. 11 (2003) 919.]. The fabrication utilised ultra high resolution electron beam lithographic patterning of an electron sensitive SU8 polymer and deep reactive ion etching of silicon. The first test of the focusing properties was performed at the ESRF BM5 optics beamline. In this paper we present details on the design and fabrication, and discuss the test results.

Consumers' Use of Personal Electronic Devices in the Kitchen.

PubMed

Lando, Amy M; Bazaco, Michael C; Chen, Yi

2018-02-23

Smartphones, tablets, and other personal electronic devices have become ubiquitous in Americans' daily lives. These devices are used by people throughout the day, including while preparing food. For example, a device may be used to look at recipes and therefore be touched multiple times during food preparation. Previous research has indicated that cell phones can harbor bacteria, including opportunistic human pathogens such as Staphylococcus and Klebsiella spp. This investigation was conducted with data from the 2016 Food Safety Survey (FSS) and from subsequent focus groups to determine the frequency with which consumers use personal electronic devices in the kitchen while preparing food, the types of devices used, and hand washing behaviors after handling these devices. The 2016 FSS is the seventh wave of a repeated cross-sectional survey conducted by the U.S. Food and Drug Administration in collaboration with the U.S. Department of Agriculture. The goal of the FSS is to evaluate U.S. adult consumer attitudes, behaviors, and knowledge about food safety. The FSS included 4,169 adults that were contacted using a dual-frame (land line and cell phone interviews) random-digit-dial sampling process. The personal electronics module was the first of three food safety topics discussed by each of eight consumer focus groups, which were convened in four U.S. cities in fall 2016. Results from the 2016 FSS revealed that of those individuals who use personal electronic devices while cooking, only about one third reported washing hands after touching the device and before continuing cooking. This proportion is significantly lower than that for self-reported hand washing behaviors after touching risky food products such as raw eggs, meat, chicken, or fish. Results from the focus groups highlight the varied usage of these devices during food preparation and the related strategies consumers are using to incorporate personal electric devices into their cooking routines.

Netiquettes for Networkers.

ERIC Educational Resources Information Center

McMurdo, George

1995-01-01

Presents 20 networking etiquette guidelines taken from electronic and print sources. Highlights include focusing on one subject, condensing messages, editing quotes, spelling and grammar, typography, mistakes, acronyms, humor, researching discussion groups, intellectual property and copyright, manners, ethics, and damage. (AEF)

Young adults' favorable perceptions of snus, dissolvable tobacco products, and electronic cigarettes: findings from a focus group study.

PubMed

Choi, Kelvin; Fabian, Lindsey; Mottey, Neli; Corbett, Amanda; Forster, Jean

2012-11-01

We explored young adults' perceptions of snus (spitless moist snuff packed in porous bags), dissolvable tobacco products, and electronic cigarettes and intention to try these products. We conducted 11 focus group discussions involving a total of 66 young adults (18-26 years old) on these new tobacco products (e.g., harmfulness, potential as quit aids, intention to try) held between July and December 2010. We analyzed discussions using a thematic approach. Participants generally reported positive perceptions of the new products, particularly because they came in flavors. Few negative perceptions were reported. Although some participants believed these products were less harmful than cigarettes and helpful in quitting smoking, others thought the opposite, particularly regarding electronic cigarettes. Participants also commented that these products could be gateways to cigarette smoking. Half of the participants, including a mix of smokers and nonsmokers, admitted they would try these products if offered by a friend. Young adults perceive the new tobacco products positively and are willing to experiment with them. Eliminating flavors in these products may reduce young adults' intentions to try these products.

Function of CN group in organic sensitizers: The first principle study.

PubMed

Liu, Yun; Shao, Di; Bai, Xiaohui; Yang, Zhenqing; Lin, Chundan; Shao, Changjin

2017-05-15

The cyano group (CN) of the acceptor in organic sensitizers plays an important role for highly efficient dye-sensitized solar cells. In this paper, three 5, 6-difluoro-2,1,3-benzothiadiazole (DFBTD) organic molecules with different number of CN units, named ME15, ME16 and ME17, were investigated by the density functional theory (DFT) and time-dependent DFT (TDDFT). We analyzed the CNs effects on the electronic structures, optical properties, adsorption modes and electron transfer and injection. The result shows that ME17 has the largest maximum absorption wavelength (λ max ) among these new designed dyes due to the strong electron withdrawing ability of two CNs. In addition, CN greatly influence the adsorption modes of dye/TiO 2 and electron injection mechanism. ME16 with one CN also has good optical absorption properties and its acceptor has the strongest coupling strength with the TiO 2 semiconductor which is favorable for electron transfer and injection. Thus, we believe that the number of CN groups in acceptor should be moderate and one CN in D-A-π-A structure dyes may be the more appropriate focusing on the light harvesting ability, electron transfer and electron injection. Copyright © 2017 Elsevier B.V. All rights reserved.

Modeling the Problem-Based Learning Preferences of McMaster University Undergraduate Medical Students Using a Discrete Choice Conjoint Experiment

ERIC Educational Resources Information Center

Cunningham, Charles E.; Deal, Ken; Neville, Alan; Rimas, Heather; Lohfeld, Lynne

2006-01-01

Objectives: To use methods from the field of marketing research to involve students in the redesign of McMaster University's small group, problem-based undergraduate medical education program. Methods: We used themes from a focus group conducted in an electronic decision support lab to compose 14 four-level educational attributes. Undergraduate…

Electron radiography

DOEpatents

Merrill, Frank E.; Morris, Christopher

2005-05-17

A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

Development of a tethered personal health record framework for early end-of-life discussions.

PubMed

Bose-Brill, Seuli; Kretovics, Matthew; Ballenger, Taylor; Modan, Gabriella; Lai, Albert; Belanger, Lindsay; Koesters, Stephen; Pressler-Vydra, Taylor; Wills, Celia

2016-06-01

End-of-life planning, known as advance care planning (ACP), is associated with numerous positive outcomes, such as improved patient satisfaction with care and improved patient quality of life in terminal illness. However, patient-provider ACP conversations are rarely performed or documented due to a number of barriers, including time required, perceived lack of skill, and a limited number of resources. Use of tethered personal health records (PHRs) may help streamline ACP conversations and documentations for outpatient workflows. Our objective was to develop an ACP-PHR framework that would be for use in a primary care, outpatient setting. Qualitative content analysis of focus groups and cognitive interviews (participatory design). A novel PHR-ACP tool was developed and tested using data and feedback collected from 4 patient focus groups (n = 13), 1 provider focus group (n = 4), and cognitive interviews (n = 22). Patient focus groups helped develop a focused, 4-question PHR communication tool. Cognitive interviews revealed that, while patients felt framework content and workflow were generally intuitive, minor changes to content and workflow would optimize the framework. A focused framework for electronic ACP communication using a patient portal tethered to the PHR was developed. This framework may provide an efficient way to have ACP conversations in busy outpatient settings.

Young Adults’ Favorable Perceptions of Snus, Dissolvable Tobacco Products, and Electronic Cigarettes: Findings From a Focus Group Study

PubMed Central

Fabian, Lindsey; Mottey, Neli; Corbett, Amanda; Forster, Jean

2012-01-01

Objectives. We explored young adults’ perceptions of snus (spitless moist snuff packed in porous bags), dissolvable tobacco products, and electronic cigarettes and intention to try these products. Methods. We conducted 11 focus group discussions involving a total of 66 young adults (18–26 years old) on these new tobacco products (e.g., harmfulness, potential as quit aids, intention to try) held between July and December 2010. We analyzed discussions using a thematic approach. Results. Participants generally reported positive perceptions of the new products, particularly because they came in flavors. Few negative perceptions were reported. Although some participants believed these products were less harmful than cigarettes and helpful in quitting smoking, others thought the opposite, particularly regarding electronic cigarettes. Participants also commented that these products could be gateways to cigarette smoking. Half of the participants, including a mix of smokers and nonsmokers, admitted they would try these products if offered by a friend. Conclusions. Young adults perceive the new tobacco products positively and are willing to experiment with them. Eliminating flavors in these products may reduce young adults’ intentions to try these products. PMID:22813086

Chronic Obstructive Pulmonary Disease Patients' Experiences of an Enhanced Self-Management Model of Care.

PubMed

Patel, Neil; Jones, Pauline; Adamson, Vikki; Spiteri, Monica; Kinmond, Kathryn

2016-03-01

Chronic obstructive pulmonary disease (COPD) is debilitating and costly. Self-management is championed to empower individuals to better manage their condition and also to efficiently utilize health resources. As a multi-disciplinary team, we conducted focus group research with individuals living with COPD who were participating in a longitudinal study to use an electronic "diary" to monitor, record, and transmit their own health status, plus receiving regular nurse visits. The main aims of the focus groups were to investigate how far individuals embraced the electronic diary and experienced it as an aid to the self-management of their condition. We also looked at the importance of the nurse visits to the process. Thematic analysis revealed that patients responded positively to the use of technology (the electronic diary), including psychological benefits of perceived support offered by the remote symptom surveillance. Findings also showed patients' increased awareness and monitoring of personal symptoms together with an improved understanding of disease self-management. Nurse support emerged as an important "human" factor in the process. In addition, a reduction in hospital admission was observed, thus reducing costs to the health service. © The Author(s) 2015.

Improving temperature monitoring in the vaccine cold chain at the periphery: an intervention study using a 30-day electronic refrigerator temperature logger (Fridge-tag).

PubMed

Kartoğlu, Umit; Nelaj, Erida; Maire, Denis

2010-05-28

This intervention study was conducted in Albania to establish the superiority of the Fridge-tag (30-day electronic refrigerator temperature logger) against thermometers. Intervention sites used Fridge-tag and a modified temperature control record sheet, while control sites continued with their routine operation with thermometers. All refrigerators in both groups were equipped with downloadable electronic data loggers to record temperatures for reference. Focus group sessions were conducted with involved staff to discuss temperature monitoring, Fridge-tag use and its user-friendliness. Significant discrepancies were observed between thermometer readings and the electronic data loggers in control sites, while all alarms from Fridge-tag were confirmed in the intervention group. Thermometers are not sufficient to monitor temperatures in refrigerators since they miss the great majority of low and high alarms. Fridge-tag has proven to be an effective tool in providing health workers with the information they need to take the necessary actions when there are refrigerator temperature variations. (c) 2010 Elsevier Ltd. All rights reserved.

High speed multiphoton axial scanning through an optical fiber in a remotely scanned temporal focusing setup

PubMed Central

Straub, Adam; Durst, Michael E.; Xu, Chris

2011-01-01

Simultaneous spatial and temporal focusing is used to acquire high speed (200Hz), chemically specific axial scans of mouse skin through a single-mode fiber. The temporal focus is remotely scanned by modulating the group delay dispersion (GDD) at the proximal end of the fiber. No moving parts or electronics are required at the distal end. A novel GDD modulation technique is implemented using a piezo bimorph mirror in a folded grating pair to achieve a large GDD tuning range at high speed. PMID:21326638

Effects of rational emotive behavior coaching on occupational stress and work ability among electronics workshop instructors in Nigeria.

PubMed

Ogbuanya, Theresa C; Eseadi, Chiedu; Orji, Chibueze T; Ohanu, Ifeanyi B; Bakare, Jimoh; Ede, Moses O

2017-05-01

This study examined the effectiveness of rational emotive behavior coaching (REBC) on occupational stress and work ability in a sample of electronics workshop instructors in Nigeria. A pretest-posttest control group design was used. The participants were 108 electronics workshop instructors in technical colleges in the south-east of Nigeria who met the study inclusion criteria. Data were collected using 3 questionnaires and analyzed using a repeated measure analysis of variance and Mann-Whitney U test. REBC led to a significant reduction in occupational stress experienced by the electronics workshop instructors in the REBC group compared to their counterparts in the waitlist control group. Furthermore, the scores for occupation-related irrational beliefs of the instructors in the REBC group were significantly lower than those in the waitlist control group at the end of the coaching intervention. The work ability of the REBC group was significantly better than that of the waitlist control group. Finally, the effects in the REBC group were significantly sustained at 3-month follow-up. REBC is a time-efficient and solution-focused therapeutic modality for assisting occupationally stressed employees in a Nigerian setting. REBC can be used for improving and maintaining work ability of workers. The researchers hope that occupational health professionals and health counselors would extend this approach to tackle psychological issues limiting employees' effectiveness and performance in the Nigerian work environment and in other countries.

Effects of rational emotive behavior coaching on occupational stress and work ability among electronics workshop instructors in Nigeria

PubMed Central

Ogbuanya, Theresa C.; Eseadi, Chiedu; Orji, Chibueze T.; Ohanu, Ifeanyi B.; Bakare, Jimoh; Ede, Moses O.

2017-01-01

Abstract Background/objective: This study examined the effectiveness of rational emotive behavior coaching (REBC) on occupational stress and work ability in a sample of electronics workshop instructors in Nigeria. Methods: A pretest–posttest control group design was used. The participants were 108 electronics workshop instructors in technical colleges in the south-east of Nigeria who met the study inclusion criteria. Data were collected using 3 questionnaires and analyzed using a repeated measure analysis of variance and Mann–Whitney U test. Results: REBC led to a significant reduction in occupational stress experienced by the electronics workshop instructors in the REBC group compared to their counterparts in the waitlist control group. Furthermore, the scores for occupation-related irrational beliefs of the instructors in the REBC group were significantly lower than those in the waitlist control group at the end of the coaching intervention. The work ability of the REBC group was significantly better than that of the waitlist control group. Finally, the effects in the REBC group were significantly sustained at 3-month follow-up. Conclusion: REBC is a time-efficient and solution-focused therapeutic modality for assisting occupationally stressed employees in a Nigerian setting. REBC can be used for improving and maintaining work ability of workers. The researchers hope that occupational health professionals and health counselors would extend this approach to tackle psychological issues limiting employees’ effectiveness and performance in the Nigerian work environment and in other countries. PMID:28489795

Spatiotemporal control of laser intensity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Froula, Dustin H.; Turnbull, David; Davies, Andrew S.

The controlled coupling of a laser to a plasma has the potential to address grand scientific challenges including reaching the Schwinger limit, developing compact free electron lasers, extending linear colliders to TeV energies, and generating novel light sources for probing electron dynamics within molecules. Currently, many such applications have limited flexibility and poor control over the laser focal volume. Here we present an advanced focusing scheme called a “flying focus” where a chromatic focusing system combined with chirped laser pulses enables a small–diameter laser focus to propagate nearly 100 times its Rayleigh length, while decoupling the speed at which themore » peak intensity moves from its group velocity. This unprecedented spatiotemporal control over the laser focal volume allows the laser focus to co- or counter–propagate along its axis at any velocity. Experiments validating the concept measured subluminal (-0.09c) to superluminal (39c) focal spot velocities generating a nearly constant peak intensity over 4.5 mm.« less

Spatiotemporal control of laser intensity

DOE PAGES

Froula, Dustin H.; Turnbull, David; Davies, Andrew S.; ...

2018-03-12

The controlled coupling of a laser to a plasma has the potential to address grand scientific challenges including reaching the Schwinger limit, developing compact free electron lasers, extending linear colliders to TeV energies, and generating novel light sources for probing electron dynamics within molecules. Currently, many such applications have limited flexibility and poor control over the laser focal volume. Here we present an advanced focusing scheme called a “flying focus” where a chromatic focusing system combined with chirped laser pulses enables a small–diameter laser focus to propagate nearly 100 times its Rayleigh length, while decoupling the speed at which themore » peak intensity moves from its group velocity. This unprecedented spatiotemporal control over the laser focal volume allows the laser focus to co- or counter–propagate along its axis at any velocity. Experiments validating the concept measured subluminal (-0.09c) to superluminal (39c) focal spot velocities generating a nearly constant peak intensity over 4.5 mm.« less

The use of electronic books in midwifery education: the student perspective.

PubMed

Appleton, Leo

2004-12-01

The objectives of this paper are: (i) to illustrate the use of e-books by health studies students at a college of higher education; (ii) to provide a demonstration of how e-books may be facilitated by library and information services staff working across the health and academic sectors; (iii) to comment upon the experiences of health studies students, in using e-books. A focus group of 10 student midwives was used to gain insight into how e-books may be used in an academic context for health professionals. The findings of the student midwives' focus group are reported and discussed. In this instance, the student midwives were encouraged to use e-books as part of a structured information skills programme. The paper concentrates on how the e-books were used within this context and addresses the potential benefits and disadvantages from a student perspective. The results provide evidence of a largely positive experience of using e-books as an electronic information resource. The focus group reveals many benefits and advantages in the facilitation and use of e-books, as well as addressing areas for development. It is concluded that e-books have a place in health library and information resources, but further development of e-books and e-book collections is required and subsequent investigation into their most effective use.

A systematic approach to baseline assessment of nursing documentation and enterprise-wide prioritization for electronic conversion.

PubMed

Dykes, Patricia C; Spurr, Cindy; Gallagher, Joan; Li, Qi; Ives Erickson, Jeanette

2006-01-01

An important challenge associated with making the transition from paper to electronic documentation systems is achieving consensus regarding priorities for electronic conversion across diverse groups. In our work we focus on applying a systematic approach to evaluating the baseline state of nursing documentation across a large healthcare system and establishing a unified vision for electronic conversion. A review of the current state of nursing documentation across PHS was conducted using structured tools. Data from this assessment was employed to facilitate an evidence-based approach to decision-making regarding conversion to electronic documentation at local and PHS levels. In this paper we present highlights of the assessment process and the outcomes of this multi-site collaboration.

Technology in Education. IDRA Focus.

ERIC Educational Resources Information Center

IDRA Newsletter, 1995

1995-01-01

This theme issue includes four articles on the effective use of computers and electronic technology in education, and on equitable access to educational technologies for Hispanics and other minority groups. "Teachers and Instructional Technology: Wise or Foolish Choices" (Laura Chris Green) describes three unproductive roles for computer…

Use of personal phones by senior nursing students to access health care information during clinical education: staff nurses' and students' perceptions.

PubMed

Wittmann-Price, Ruth A; Kennedy, Lynn D; Godwin, Catherine

2012-11-01

Research indicates that having electronic resources readily available increases learners' ability to make clinical decisions and confidence in patient care. This mixed-method, descriptive pilot study collected data about senior prelicensure nursing students using smartphones, a type of mobile electronic device (MED), in the clinical area. The smartphones contained nursing diagnosis, pharmacology, and laboratory information; an encyclopedia; and the MEDLINE database. Student (n = 7) data about smartphone use during a 10-week clinical rotation were collected via student-recorded usage logs and focus group recordings. Staff nurses' (n = 5) perceptions of students' use of smartphones for clinical educational resources were collected by anonymous survey. Both the focus group transcript and staff surveys were evaluated and the themes summarized by content analysis. Positive results and barriers to use, such as cost and technological comfort levels, are discussed. The results may help nurse educators and administrators initiate further research of MEDs as a clinical resource. Copyright 2012, SLACK Incorporated.

First-principles study of the effect of functional groups on polyaniline backbone

PubMed Central

Chen, X. P.; Jiang, J. K.; Liang, Q. H.; Yang, N.; Ye, H. Y.; Cai, M.; Shen, L.; Yang, D. G.; Ren, T. L.

2015-01-01

We present a first-principles density functional theory study focused on how the chemical and electronic properties of polyaniline are adjusted by introducing suitable substituents on a polymer backbone. Analyses of the obtained energy barriers, reaction energies and minimum energy paths indicate that the chemical reactivity of the polyaniline derivatives is significantly enhanced by protonic acid doping of the substituted materials. Further study of the density of states at the Fermi level, band gap, HOMO and LUMO shows that both the unprotonated and protonated states of these polyanilines are altered to different degrees depending on the functional group. We also note that changes in both the chemical and electronic properties are very sensitive to the polarity and size of the functional group. It is worth noting that these changes do not substantially alter the inherent chemical and electronic properties of polyaniline. Our results demonstrate that introducing different functional groups on a polymer backbone is an effective approach to obtain tailored conductive polymers with desirable properties while retaining their intrinsic properties, such as conductivity. PMID:26584671

Interactive, Collaborative, Electronic Learning Logs in the Physics Classroom

NASA Astrophysics Data System (ADS)

Gosling, Chris

2006-12-01

I describe my experiences using Hickman's Interactive Collaborative Electronic Learning Logs teaching HS Physics. ICE Learning Logs are written in student groups to answer questions posed by the instructor, who then in turn responds to each group’s entry before the next class. These logs were used with non-physics majors in both algebra and calculus-based introductory physics courses, and also at the high school level. I found ICE Learning Logs were found to be a clear improvement over traditional student journals. Excerpts from group entries will be presented to demonstrate the group identities that formed as well as the utility of the journals to probe for conceptual understanding. In addition, the ICE Learning Logs served as an excellent resource for students to review before exams and also to examine for critical moments to reflect on in formal essays. Hickman, P. (2000). Assessing student understanding with interactive-electronic-collaborative learning logs. ENC Focus, 7(2), 24-27. Sponsored by the National Science Foundation DUE0302097 and SUNY-Buffalo State Physics

Deafblind People's Experiences of Cochlear Implantation

ERIC Educational Resources Information Center

Soper, Janet

2006-01-01

Cochlear implants are electronic devices that create the sensation of hearing in those who cannot obtain any benefit from conventional hearing aids. This article examines the experience of cochlear implantation in a select group of individuals with acquired deafblindness, focusing on three key themes: access to communication, information and…

Plasma Charge Current for Controlling and Monitoring Electron Beam Welding with Beam Oscillation

PubMed Central

Trushnikov, Dmitriy; Belenkiy, Vladimir; Shchavlev, Valeriy; Piskunov, Anatoliy; Abdullin, Aleksandr; Mladenov, Georgy

2012-01-01

Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. Therefore, adaptive systems of electron beam focus control use low-frequency scanning of focus, which substantially limits the operation speed of these systems and has a negative effect on weld joint quality. The purpose of this study is to develop a method for operational control of the electron beam focus during welding in the deep penetration mode. The method uses the plasma charge current signal as an additional informational parameter. This parameter allows identification of the electron beam focus regime in electron-beam welding without application of additional low-frequency scanning of focus. It can be used for working out operational electron beam control methods focusing exactly on the welding. In addition, use of this parameter allows one to observe the shape of the keyhole during the welding process. PMID:23242276

Plasma charge current for controlling and monitoring electron beam welding with beam oscillation.

PubMed

Trushnikov, Dmitriy; Belenkiy, Vladimir; Shchavlev, Valeriy; Piskunov, Anatoliy; Abdullin, Aleksandr; Mladenov, Georgy

2012-12-14

Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. Therefore, adaptive systems of electron beam focus control use low-frequency scanning of focus, which substantially limits the operation speed of these systems and has a negative effect on weld joint quality. The purpose of this study is to develop a method for operational control of the electron beam focus during welding in the deep penetration mode. The method uses the plasma charge current signal as an additional informational parameter. This parameter allows identification of the electron beam focus regime in electron-beam welding without application of additional low-frequency scanning of focus. It can be used for working out operational electron beam control methods focusing exactly on the welding. In addition, use of this parameter allows one to observe the shape of the keyhole during the welding process.

Aromaticity and Antiaromaticity in Zintl Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Zhong -Ming; Liu, Chao; Popov, Ivan Aleksandrovich

Originally, the concepts of aromaticity and antiaromaticity were introduced to explain the stability and reactivity of unsaturated organic compounds. Since then, they have been extended to other species with delocalized electrons including various saturated systems, organometallic compounds, and even inorganic clusters and molecules. In this study, we focus on the most recent progress of using these concepts to guide experimental synthesis and rationalize geometrical and electronic structures of a particular family of polyanions composed of Group 14 and 15 elements, namely Zintl clusters.

Aromaticity and Antiaromaticity in Zintl Clusters

DOE PAGES

Sun, Zhong -Ming; Liu, Chao; Popov, Ivan Aleksandrovich; ...

2018-05-18

Originally, the concepts of aromaticity and antiaromaticity were introduced to explain the stability and reactivity of unsaturated organic compounds. Since then, they have been extended to other species with delocalized electrons including various saturated systems, organometallic compounds, and even inorganic clusters and molecules. In this study, we focus on the most recent progress of using these concepts to guide experimental synthesis and rationalize geometrical and electronic structures of a particular family of polyanions composed of Group 14 and 15 elements, namely Zintl clusters.

Use of a Patient-Accessible Electronic Medical Record in a Practice for Congestive Heart Failure: Patient and Physician Experiences

PubMed Central

Earnest, Mark A.; Ross, Stephen E.; Wittevrongel, Loretta; Moore, Laurie A.; Lin, Chen-Tan

2004-01-01

Objective: The aim of this study was to evaluate the experiences of patients and physicians in a clinical trial of an online electronic medical record (SPPARO, System Providing Patients Access to Records Online). Design: Quantitative data were obtained from questionnaires. Qualitative data were obtained from individual interviews and focus groups. Measurements: Questionnaire items were based on issues identified by patients and physicians in previous studies. Individual interviews and focus groups were performed using a semistructured format developed through an iterative process. Results: Of the eight physicians who participated in the trial, seven completed questionnaires and interviews. Of the 394 patients in the practice, 107 enrolled in the study, and 54 were assigned randomly to the intervention group. Of these, 41 used SPPARO during the trial period. In questionnaires and interviews, patients were significantly more likely than physicians to anticipate benefits of SPPARO and less likely to anticipate problems. Attitudes of subjects did not diverge from controls after the intervention period. In posttrial focus groups, SPPARO users described its practical benefits. Comprehending medical jargon was a minor obstacle. Physicians anticipated that implementing SPPARO might increase their workload and distort their clinical interactions. In posttrial interviews, physicians and staff reported no change in their workload and no adverse consequences. All of the physicians ultimately supported the concept of giving patients online access to their clinical notes and test results. Conclusion: SPPARO was useful for a number of patients. Physicians initially voiced a number of concerns about implementing SPPARO, but their experience with it was far more positive. PMID:15187074

Using an electronic prescribing system to ensure accurate medication lists in a large multidisciplinary medical group.

PubMed

Stock, Ron; Scott, Jim; Gurtel, Sharon

2009-05-01

Although medication safety has largely focused on reducing medication errors in hospitals, the scope of adverse drug events in the outpatient setting is immense. A fundamental problem occurs when a clinician lacks immediate access to an accurate list of the medications that a patient is taking. Since 2001, PeaceHealth Medical Group (PHMG), a multispecialty physician group, has been using an electronic prescribing system that includes medication-interaction warnings and allergy checks. Yet, most practitioners recognized the remaining potential for error, especially because there was no assurance regarding the accuracy of information on the electronic medical record (EMR)-generated medication list. PeaceHealth developed and implemented a standardized approach to (1) review and reconcile the medication list for every patient at each office visit and (2) report on the results obtained within the PHMG clinics. In 2005, PeaceHealth established the ambulatory medication reconciliation project to develop a reliable, efficient process for maintaining accurate patient medication lists. Each of PeaceHealth's five regions created a medication reconciliation task force to redesign its clinical practice, incorporating the systemwide aims and agreed-on key process components for every ambulatory visit. Implementation of the medication reconciliation process at the PHMG clinics resulted in a substantial increase in the number of accurate medication lists, with fewer discrepancies between what the patient is actually taking and what is recorded in the EMR. The PeaceHealth focus on patient safety, and particularly the reduction of medication errors, has involved a standardized approach for reviewing and reconciling medication lists for every patient visiting a physician office. The standardized processes can be replicated at other ambulatory clinics-whether or not electronic tools are available.

Elementary School Teachers' Perceptions Regarding the Inclusion of LGBTQ Themed Literature

ERIC Educational Resources Information Center

Grasso, Dominic

2016-01-01

This critical explanatory mixed methods study examined elementary teachers' perceptions regarding the inclusion of LGBTQ-themed literature in the curriculum. An electronic survey questionnaire and focus group sessions were used to collect both quantitative and qualitative data that described the perceived benefits and barriers of LGBTQ-themed…

The Future of Scholarly Publishing

ERIC Educational Resources Information Center

Chronicle of Higher Education, 2009

2009-01-01

In these times of financial crisis, much of the discussion about scholarly publishing has focused on budgets, the switch to electronic formats, and the future of the monograph. Throughout, however, university presses have continued to bring out important scholarship that is the mainstay of academe. "The Chronicle Review" asked a group of editors…

Instructional Utilization of the Internet in Public School Settings.

ERIC Educational Resources Information Center

Milheim, William D.

1997-01-01

Discussion of use of the Internet in educational settings focuses on providing specific information for elementary and secondary school personnel to increase their awareness and utilization of the Internet. Topics include accessing the Internet; school access; origins of the Internet; electronic mail; discussion groups, or listservs; newsgroups;…

Process-Oriented Measurement Using Electronic Tangibles

ERIC Educational Resources Information Center

Veerbeek, Jochanan; Verhaegh, Janneke; Elliott, Julian G.; Resing, Wilma C. M.

2017-01-01

This study evaluated a new measure for analyzing the process of children's problem solving in a series completion task. This measure focused on a process that we entitled the "Grouping of Answer Pieces" (GAP) that was employed to provide information on problem representation and restructuring. The task was conducted using an electronic…

Qualitative study of the impact of an authentic electronic portfolio in undergraduate medical education.

PubMed

Belcher, Rosie; Jones, Anna; Smith, Laura-Jane; Vincent, Tim; Naidu, Sindhu Bhaarrati; Montgomery, Julia; Haq, Inam; Gill, Deborah

2014-12-17

Portfolios are increasingly used in undergraduate and postgraduate medical education. Four medical schools have collaborated with an established NHS electronic portfolio provider to develop and implement an authentic professional electronic portfolio for undergraduate students. We hypothesized that using an authentic portfolio would have significant advantages for students, particularly in familiarizing them with the tool many will continue to use for years after graduation. This paper describes the early evaluation of this undergraduate portfolio at two participating medical schools. To gather data, a questionnaire survey with extensive free text comments was used at School 1, and three focus groups were held at School 2. This paper reports thematic analysis of students' opinions expressed in the free text comments and focus groups. Five main themes, common across both schools were identified. These concerned the purpose, use and acceptability of the portfolio, advantages of and barriers to the use of the portfolio, and the impacts on both learning and professional identity. An authentic portfolio mitigated some of the negative aspects of using a portfolio, and had a positive effect on students' perception of themselves as becoming past of the profession. However, significant barriers to portfolio use remained, including a lack of understanding of the purpose of a portfolio and a perceived damaging effect on feedback.

Mitigating Stress, Workload, and Fatigue on the Electronic Battlefield

DTIC Science & Technology

2007-03-28

left up to graphic designers , marketers, and advertisers (Teague & Whitney, 2002). Such research relies on focus groups and samples of opinion as to...cont. • Previous Research on Menu Design – Color coding • Tullis, 1981; Yeh & Wickens 2001 – Grouping • Kahneman & Henick, 1977; Winzenz, 1972... research (Sheridan, 2002). The issue of control is a vital one since it is evident that we still design as though the machine system is to react

Focused electron beam induced deposition of pure SIO II

NASA Astrophysics Data System (ADS)

Perentes, Alexandre; Hoffmann, Patrik; Munnik, Frans

2007-02-01

Focused electron beam induced processing (FEBID) equipments are the "all in one" tools for high resolution investigation, and modification of nano-devices. Focused electron beam induced deposition from a gaseous precursor usually results in a nano-composite sub-structured material, in which the interesting material is embedded in an amorphous carbonaceous matrix. Using the Hydrogen free tetraisocyanatosilane Si(NCO) 4 molecule as Si source, we show how a controlled oxygen flux, simultaneously injected with the precursor vapors, causes contaminants to vanish from the FEB deposits obtained and leads to the deposition of pure SiO II. The chemical composition of the FEBID material could be controlled from SiC IINO 3 to SiO II, the latter containing undetectable foreign element contamination. The [O II] / [TICS] ratio needed to obtain SiO II in our FEB deposition equipment is larger than 300. The evolution of the FEBID material chemical composition is presented as function of the [O II] / [TICS] molecular flux ratios. A hypothetical decomposition pathway of this silane under these conditions is discussed based on the different species formed under electron bombardment of TICS. Transmission electron microscopy investigations demonstrated that the deposited oxide is smooth (roughness sub 2nm) and amorphous. Infrared spectroscopy confirmed the low concentration of hydroxyl groups. The Hydrogen content of the deposited oxide, measured by elastic recoil detection analysis, is as low as 1 at%. 193nm wavelength AIMS investigations of 125nm thick SiO II pads (obtained with [O II] / [TICS] = 325) showed an undetectable light absorption.

Focused Research Group in Correlated Electron and Complex Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Ziqiang

While the remarkable physical properties of correlated and complex electronic materials hold great promise for technological applications, one of the key values of the research in this field is its profound impact on fundamental physics. The transition metal oxides, pnictides, and chalcogenides play a key role and occupy an especially important place in this field. The basic reason is that the outer shell of transition metals contains the atomic d-orbitals that have small spatial extent, but not too small to behave as localized orbtials. These d-electrons therefore have a small wave function overlap in a solid, e.g. in an octahedralmore » environment, and form energy bands that are relatively narrow and on the scale of the short-range intra-atomic Coulomb repulsion (Hubbard U). In this intermediate correlation regime lies the challenge of the many-body physics responsible for new and unconventional physical properties. The study of correlated electron and complex materials represents both the challenge and the vitality of condensed matter and materials physics and often demands close collaborations among theoretical and experimental groups with complementary techniques. Our team has a track record and a long-term research goal of studying the unusual complexities and emergent behaviors in the charge, spin, and orbital sectors of the transition metal compounds in order to gain basic knowledge of the quantum electronic states of matter. During the funding period of this grant, the team continued their close collaborations between theory, angle-resolved photoemission spectroscopy, and scanning tunneling microscopy and made significant progress and contributions to the field of iron-based superconductors, copper-oxide high-temperature superconductors, triangular lattice transition metal oxide cobaltates, strontium ruthenates, spin orbital coupled iridates, as well as topological insulators and other topological quantum states of matter. These results include both new discoveries and the resolution to outstanding and unresolved issues. It should be emphasized that the DOE funding provided the crucial support for the close and meaningful collaborations of the focused research group that go far beyond simply putting the research papers from each group together. Indeed, the majority of the publications involved multiple PIs and collaborations between theory and experiments.« less

A Survey of the Use of Iterative Reconstruction Algorithms in Electron Microscopy

PubMed Central

Otón, J.; Vilas, J. L.; Kazemi, M.; Melero, R.; del Caño, L.; Cuenca, J.; Conesa, P.; Gómez-Blanco, J.; Marabini, R.; Carazo, J. M.

2017-01-01

One of the key steps in Electron Microscopy is the tomographic reconstruction of a three-dimensional (3D) map of the specimen being studied from a set of two-dimensional (2D) projections acquired at the microscope. This tomographic reconstruction may be performed with different reconstruction algorithms that can be grouped into several large families: direct Fourier inversion methods, back-projection methods, Radon methods, or iterative algorithms. In this review, we focus on the latter family of algorithms, explaining the mathematical rationale behind the different algorithms in this family as they have been introduced in the field of Electron Microscopy. We cover their use in Single Particle Analysis (SPA) as well as in Electron Tomography (ET). PMID:29312997

Electron-Focus Adjustment for Photo-Optical Imagers

NASA Technical Reports Server (NTRS)

Fowler, Walter B.; Flemming, Keith; Ziegler, Michael M.

1987-01-01

Internal electron focus made independent of optical focus. Procedure enables fine tuning of internal electron-focusing system of photo-optical imager, without complication by imperfections of associated external optics. Applicable to imager in which electrons emitted from photocathode in optical focal plane, then electrostatically and/or magnetically focused to replica of image in second focal plane containing photodiodes, phototransistorss, charge-coupled devices, multiple-anode outputs, or other detectors.

The low-lying quartet electronic states of group 14 diatomic borides XB (X = C, Si, Ge, Sn, Pb)

NASA Astrophysics Data System (ADS)

Pontes, Marcelo A. P.; de Oliveira, Marcos H.; Fernandes, Gabriel F. S.; Da Motta Neto, Joaquim D.; Ferrão, Luiz F. A.; Machado, Francisco B. C.

2018-04-01

The present work focuses in the characterization of the low-lying quartet electronic and spin-orbit states of diatomic borides XB, in which X is an element of group 14 (C, Si, Ge, Sn, PB). The wavefunction was obtained at the CASSCF/MRCI level with a quintuple-ζ quality basis set. Scalar relativistic effects were also taken into account. A systematic and comparative analysis of the spectroscopic properties for the title molecular series was carried out, showing that the (1)4Π→X4Σ- transition band is expected to be measurable by emission spectroscopy to the GeB, SnB and PbB molecules, as already observed for the lighter CB and SiB species.

Health-oriented electronic oral health record: development and evaluation.

PubMed

Wongsapai, Mansuang; Suebnukarn, Siriwan; Rajchagool, Sunsanee; Beach, Daryl; Kawaguchi, Sachiko

2014-06-01

This study aims to develop and evaluate a new Health-oriented Electronic Oral Health Record that implements the health-oriented status and intervention index. The index takes the principles of holistic oral healthcare and applies them to the design and implementation of the Health-oriented Electronic Oral Health Record. We designed an experiment using focus groups and a consensus (Delphi process) method to develop a new health-oriented status and intervention index and graphical user interface. A comparative intervention study with qualitative and quantitative methods was used to compare an existing Electronic Oral Health Record to the Health-oriented Electronic Oral Health Record, focusing on dentist satisfaction, accuracy, and completeness of oral health status recording. The study was conducted by the dental staff of the Inter-country Center for Oral Health collaborative hospitals in Thailand. Overall, the user satisfaction questionnaire had a positive response to the Health-oriented Electronic Oral Health Record. The dentists found it easy to use and were generally satisfied with the impact on their work, oral health services, and surveillance. The dentists were significantly satisfied with the Health-oriented Electronic Oral Health Record compared to the existing Electronic Oral Health Record (p < 0.001). The accuracy and completeness values of the oral health information recorded using the Health-oriented Electronic Oral Health Record were 97.15 and 93.74 percent, respectively. This research concludes that the Health-oriented Electronic Oral Health Record satisfied many dentists, provided benefits to holistic oral healthcare, and facilitated the planning, managing, and evaluation of the healthcare delivery system.

Topological materials discovery using electron filling constraints

NASA Astrophysics Data System (ADS)

Chen, Ru; Po, Hoi Chun; Neaton, Jeffrey B.; Vishwanath, Ashvin

2018-01-01

Nodal semimetals are classes of topological materials that have nodal-point or nodal-line Fermi surfaces, which give them novel transport and topological properties. Despite being highly sought after, there are currently very few experimental realizations, and identifying new materials candidates has mainly relied on exhaustive database searches. Here we show how recent studies on the interplay between electron filling and nonsymmorphic space-group symmetries can guide the search for filling-enforced nodal semimetals. We recast the previously derived constraints on the allowed band-insulator fillings in any space group into a new form, which enables effective screening of materials candidates based solely on their space group, electron count in the formula unit, and multiplicity of the formula unit. This criterion greatly reduces the computation load for discovering topological materials in a database of previously synthesized compounds. As a demonstration, we focus on a few selected nonsymmorphic space groups which are predicted to host filling-enforced Dirac semimetals. Of the more than 30,000 entires listed, our filling criterion alone eliminates 96% of the entries before they are passed on for further analysis. We discover a handful of candidates from this guided search; among them, the monoclinic crystal Ca2Pt2Ga is particularly promising.

A Unified Electronic Tool for CPR and Emergency Treatment Escalation Plans Improves Communication and Early Collaborative Decision Making for Acute Hospital Admissions.

PubMed

Johnson, Mae; Whyte, Martin; Loveridge, Robert; Yorke, Richard; Naleem, Shairana

2017-01-01

The National Confidential Enquiry into Patient Outcomes and Death (NCEPOD) report 'Time to Intervene' (2012) stated that in a substantial number of cases, resuscitation is attempted when it was thought a 'do not attempt cardiopulmonary resuscitation' (DNACPR) decision should have been in place. Early decisions about CPR status and advance planning about limits of care now form part of national recommendations by the UK Resuscitation Council (2016). Treatment escalation plans (TEP) document what level of treatment intervention would be appropriate if a patient were to become acutely unwell and were not previously formally in place at King's College Hospital. A unifying paper based form was successfully piloted in the Acute Medical Unit, introducing the TEP and bringing together decision making around both treatment escalation and CPR status. Subsequently an electronic order-set for CPR status and treatment escalation was launched in April 2015 which led to a highly visible CPR and escalation status banner on the main screen at the top of the patient's electronic record. Ultimately due to further iterations in the electronic process by December 2016, all escalation decisions for acutely admitted patients now have high quality supporting, explanatory documentation with 100% having TEPs in place. There is now widespread multidisciplinary engagement in the process of defining limits of care for acutely admitted medical patients within the first 14 hours of admission and a strategy for rolling this process out across all the divisions of the hospital through our Deteriorating Patient Group (DPG). The collaborative design with acute medical, palliative and intensive care teams and the high visibility provided by the electronic process in the Electronic Patient Record (EPR) has enhanced communication with these teams, patients, nursing staff and the multidisciplinary team by ensuring clarity through a universally understood process about escalation and CPR. Clarity and openness about these discussions have been welcomed by patient focus groups facilitated via our acute medicine patient experience committee. There has been a shift in medical culture where transparency about limits of care has contributed to improving patient safety and quality of care through reducing unnecessary CPR supported by focus groups of staff.

Protein structure, electron transfer and evolution of prokaryotic photosynthetic reaction centers

NASA Technical Reports Server (NTRS)

Blankenship, R. E.

1994-01-01

Photosynthetic reaction centers from a variety of organisms have been isolated and characterized. The groups of prokaryotic photosynthetic organisms include the purple bacteria, the filamentous green bacteria, the green sulfur bacteria and the heliobacteria as anoxygenic representatives as well as the cyanobacteria and prochlorophytes as oxygenic representatives. This review focuses on structural and functional comparisons of the various groups of photosynthetic reaction centers and considers possible evolutionary scenarios to explain the diversity of existing photosynthetic organisms.

Synthesis and electronic properties of nanophase semiconductor materials

NASA Astrophysics Data System (ADS)

Sailor, Michael J.

1993-05-01

The objective of the research effort is to understand and learn to control the morphologic and electronic properties of electrodeposited nanophase semiconductors. The initial work has focused on electrodeposition of nanophase CdSe, using a sequential monolayer deposition technique that we are developing. We are currently extending the synthesis phase of this project into silicon, silicon carbide, and phosphor materials. This work also encompasses studying semiconductor electrodeposition into materials with restricted dimensions, such as microporous alumina and porous silicon membranes. By growing films with very small grain sizes, we hope to produce and study materials that display unusual electronic or luminescent effects. We are primarily interested in the electronic properties of the II-VI and group IV materials, for potential applications in nanoscale electronics and optical detector technologies. The phosphors are being studied for their potential as efficient high-resolution display materials.

Electron beam focusing system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dikansky, N.; Nagaitsev, S.; Parkhomchuk, V.

1997-09-01

The high energy electron cooling requires a very cold electron beam. Thus, the electron beam focusing system is very important for the performance of electron cooling. A system with and without longitudinal magnetic field is presented for discussion. Interaction of electron beam with the vacuum chamber as well as with the background ions and stored antiprotons can cause the coherent electron beam instabilities. Focusing system requirements needed to suppress these instabilities are presented.

National data showed that delayed sleep in six-year-old children was associated with excessive use of electronic devices at 12 years.

PubMed

Kato, Tsuguhiko; Yorifuji, Takashi; Yamakawa, Michiyo; Inoue, Sachiko

2018-01-31

Cross-sectional studies have shown associations between adolescent sleep problems and the use of electronic devices, such as mobile phones, but longitudinal studies remain scarce. We explored any association between delayed bedtimes at six years old and the excessive use of electronic devices at 12 years of age. Texting was a prime focus. We analysed 9607 adolescents who owned mobile phones in 2013 using the Japanese Longitudinal Survey of Newborns in the 21st Century, which started in 2001. The outcomes were daily excessive use of a mobile phone, television (TV) and video games. Delayed bedtime at the age of six years was associated with excessive texting at weekends. The adjusted odds ratios and 95% confidence intervals obtained from logistic regression analyses were 1.88 (1.14-3.10) for the 10-11 pm group and 1.98 (1.08-3.63) for the after 11 pm group, compared with the before 9 pm group. Later bedtimes were also associated with increased risks of excessive TV viewing and video game use. Our study indicated that six-year-olds who regularly stayed up late at night used electronic devices more frequently, or for longer, at the age of 12. Parents need to be more aware of links between sleep issues and electronic devices. ©2018 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Teen use of a patient portal: a qualitative study of parent and teen attitudes.

PubMed

Bergman, David A; Brown, Nancy L; Wilson, Sandra

2008-01-01

We conducted a qualitative study of the attitudes of teens and parents toward the use of a patient portal. We conducted two teen and two parent focus groups, one teen electronic bulletin board, and one parent electronic bulletin board. Videotapes and transcripts from the groups were independently analyzed by two reviewers for significant themes, which were then validated by two other members of the research team. Twenty-eight teens and 23 parents participated in the groups. Significant themes included issues about teens' control of their own healthcare; enthusiasm about the use of a patient portal to access their providers, seek health information, and make appointments; and concerns about confidentiality. In summary, there was considerable support among teens and parents for a patient portal as well as concerns about confidentiality. The teen portal affords an opportunity to negotiate issues of confidentiality.

One-Dimensional Nanostructures and Devices of II–V Group Semiconductors

PubMed Central

2009-01-01

The II–V group semiconductors, with narrow band gaps, are important materials with many applications in infrared detectors, lasers, solar cells, ultrasonic multipliers, and Hall generators. Since the first report on trumpet-like Zn3P2nanowires, one-dimensional (1-D) nanostructures of II–V group semiconductors have attracted great research attention recently because these special 1-D nanostructures may find applications in fabricating new electronic and optoelectronic nanoscale devices. This article covers the 1-D II–V semiconducting nanostructures that have been synthesized till now, focusing on nanotubes, nanowires, nanobelts, and special nanostructures like heterostructured nanowires. Novel electronic and optoelectronic devices built on 1-D II–V semiconducting nanostructures will also be discussed, which include metal–insulator-semiconductor field-effect transistors, metal-semiconductor field-effect transistors, andp–nheterojunction photodiode. We intent to provide the readers a brief account of these exciting research activities. PMID:20596452

Design Two-dimensional Materials with Superb Electronic and Optoelectronic Properties: The case of SiS

NASA Astrophysics Data System (ADS)

Wei, Su-Huai; Yang, Ji-Hui; Zhang, Yueyu; Yin, Wan-Jian; Gong, X. G.; Yakobson, Boris I.

Two-dimensional (2D) semiconductors have many unique electronic and optoelectronic properties that is suitable for novel device applications. Most of the current study are focused on group IV or transition metal chalcogenides. In this study, using atomic transmutation and global optimization methods, we identified two group IV-VI 2D materials, Pma2-SiS and silicene sulfide that can overcome shortcomings encountered in conventional 2D semiconducttord. Pma2-SiS is found to be both chemically, energetically, and thermally stable. Most importantly, Pma2-SiS has unique electronic and optoelectronic properties, including direct bandgaps suitable for solar cells, good mobility for nanoelectronics, good flexibility of property tuning by layer thickness and strain appliance, and good air stability as well. Therefore, Pma2-SiS is expected to be a very promising 2D material in the field of 2D electronics and optoelectronics. Silicene sulfide also shows similar properties. We believe that the designing principles and approaches used to identify these materials have great potential to accelerate future finding of new functional materials within the 2D families.

Investigation and Control of "Sphere-Like" Buckminsterfullerene C60 and "Disk-Like" Copper(II) Phthalocyanine

NASA Astrophysics Data System (ADS)

McAfee, Terry Richard

Due to the growing global need for cheap, flexible, and portable electronics, numerous research groups from mechanical and electrical engineering, material science, chemistry, and physics have increasingly turned to organic electronics research over the last ˜5--10 years. Largely, the focus of researchers in this growing field have sought to obtain the next record holding device, allowing a heuristic approach of trial and error to become dominant focus of research rather than a fundamental understanding. Rather than working with the latest high performance organic semiconducting materials and film processing techniques, I have chosen to investigate and control the fundamental self-assembly interactions of organic photovoltaic thin films using simplified systems. Specifically, I focus on organic photovoltaic research using two of the oldest and well studies semiconducting materials, namely "sphere-like" electron donor material Buckminsterfullerene C60 and "disklike" electron acceptor material Copper(II) Phthalocyanine. I manufactured samples using the well-known technique of physical vapor deposition using a high vacuum chamber that I designed and built to accommodate my need of precise material deposition control, with codeposition capability. Films were characterized using microscopy and spectroscopy techniques locally at NCSU, including Atomic Force Microscopy, scanning tunneling microscopy, X-ray photoelectron spectroscopy, and Ultraviolet-visible spectroscopy, as well as at National Laboratory based synchrotron x-ray techniques, including Carbon and Nitrogen k-edge Total Electron Yield and Transmission Near Edge X-ray absorption fine structure spectroscopy, Carbon k-edge Resonant Soft x-ray Microscopy, Resonant Soft x-ray reflectivity, and Grazing Incidence Wide-Angle X-ray scattering.

Compact electron beam focusing column

NASA Astrophysics Data System (ADS)

Persaud, Arun; Leung, Ka-Ngo; Reijonen, Jani

2001-12-01

A novel design for an electron beam focusing column has been developed at LBNL. The design is based on a low-energy spread multicusp plasma source which is used as a cathode for electron beam production. The focusing column is 10 mm in length. The electron beam is focused by means of electrostatic fields. The column is designed for a maximum voltage of 50 kV. Simulations of the electron trajectories have been performed by using the 2D simulation code IGUN and EGUN. The electron temperature has also been incorporated into the simulations. The electron beam simulations, column design and fabrication will be discussed in this presentation.

Electron microscope aperture system

NASA Technical Reports Server (NTRS)

Heinemann, K. (Inventor)

1976-01-01

An electron microscope including an electron source, a condenser lens having either a circular aperture for focusing a solid cone of electrons onto a specimen or an annular aperture for focusing a hollow cone of electrons onto the specimen, and an objective lens having an annular objective aperture, for focusing electrons passing through the specimen onto an image plane are described. The invention also entails a method of making the annular objective aperture using electron imaging, electrolytic deposition and ion etching techniques.

The rational design of a Au(I) precursor for focused electron beam induced deposition

PubMed Central

Marashdeh, Ali; Tiesma, Thiadrik; van Velzen, Niels J C; Harder, Sjoerd; Havenith, Remco W A; De Hosson, Jeff T M

2017-01-01

Au(I) complexes are studied as precursors for focused electron beam induced processing (FEBIP). FEBIP is an advanced direct-write technique for nanometer-scale chemical synthesis. The stability and volatility of the complexes are characterized to design an improved precursor for pure Au deposition. Aurophilic interactions are found to play a key role. The short lifetime of ClAuCO in vacuum is explained by strong, destabilizing Au–Au interactions in the solid phase. While aurophilic interactions do not affect the stability of ClAuPMe3, they leave the complex non-volatile. Comparison of crystal structures of ClAuPMe3 and MeAuPMe3 shows that Au–Au interactions are much weaker or partially even absent for the latter structure. This explains its high volatility. However, MeAuPMe3 dissociates unfavorably during FEBIP, making it an unsuitable precursor. The study shows that Me groups reduce aurophilic interactions, compared to Cl groups, which we attribute to electronic rather than steric effects. Therefore we propose MeAuCO as a potential FEBIP precursor. It is expected to have weak Au–Au interactions, making it volatile. It is stable enough to act as a volatile source for Au deposition, being stabilized by 6.5 kcal/mol. Finally, MeAuCO is likely to dissociate in a single step to pure Au. PMID:29354346

The rational design of a Au(I) precursor for focused electron beam induced deposition.

PubMed

Marashdeh, Ali; Tiesma, Thiadrik; van Velzen, Niels J C; Harder, Sjoerd; Havenith, Remco W A; De Hosson, Jeff T M; van Dorp, Willem F

2017-01-01

Au(I) complexes are studied as precursors for focused electron beam induced processing (FEBIP). FEBIP is an advanced direct-write technique for nanometer-scale chemical synthesis. The stability and volatility of the complexes are characterized to design an improved precursor for pure Au deposition. Aurophilic interactions are found to play a key role. The short lifetime of ClAuCO in vacuum is explained by strong, destabilizing Au-Au interactions in the solid phase. While aurophilic interactions do not affect the stability of ClAuPMe 3 , they leave the complex non-volatile. Comparison of crystal structures of ClAuPMe 3 and MeAuPMe 3 shows that Au-Au interactions are much weaker or partially even absent for the latter structure. This explains its high volatility. However, MeAuPMe 3 dissociates unfavorably during FEBIP, making it an unsuitable precursor. The study shows that Me groups reduce aurophilic interactions, compared to Cl groups, which we attribute to electronic rather than steric effects. Therefore we propose MeAuCO as a potential FEBIP precursor. It is expected to have weak Au-Au interactions, making it volatile. It is stable enough to act as a volatile source for Au deposition, being stabilized by 6.5 kcal/mol. Finally, MeAuCO is likely to dissociate in a single step to pure Au.

Parents' and Sons' Perspectives on Video Game Play: A Qualitative Study

ERIC Educational Resources Information Center

Kutner, Lawrence A.; Olson, Cheryl K.; Warner, Dorothy E.; Hertzog, Sarah M.

2008-01-01

Public policy efforts to restrict children's access to electronic games with violent or sexual content are often predicated on assumptions about parental concerns. As an initial step in determining whether those assumptions are accurate, the authors conduct focus groups of 21 adolescent boys and 21 of their parents or guardians to explore parents'…

Research Laboratory of Electronic Progress Report Number 135.

DTIC Science & Technology

1993-06-01

78 @ 1.12 Ultrashort Pulse Generation in Solid State Lasers ...generation the use of intracavity self-phase-modulation and of ultrashort laser pulses is essential for studies of negative group velocity dispersion... pulses . Our studies focus on exploiting mode locked solid state lasers . While the dominant the short pulse durations and high peak intensity of effect of

E-Book and Printed Book Reading in Different Contexts as Emergent Literacy Facilitator

ERIC Educational Resources Information Center

Korat, Ofra; Segal-Drori, Ora

2016-01-01

Research Findings: We present 3 studies that focused on preschoolers' electronic book (e-book) reading in different contexts aimed at supporting children's early literacy. In Study 1 we researched the impact of children's age and number of independent readings on phonological awareness and word reading. We found that all age groups benefited from…

Method of forming aperture plate for electron microscope

NASA Technical Reports Server (NTRS)

Heinemann, K. (Inventor)

1974-01-01

An electron microscope is described with an electron source a condenser lens having either a circular aperture for focusing a solid cone of electrons onto a specimen or an annular aperture for focusing a hollow cone of electrons onto the specimen. It also has objective lens with an annular objective aperture, for focusing electrons passing through the specimen onto an image plane. A method of making the annular objective aperture using electron imaging, electrolytic deposition and ion etching techniques is included.

Evaluating a Web-Based Health Risk Assessment With Tailored Feedback: What Does an Expert Focus Group Yield Compared to a Web-Based End-User Survey?

PubMed Central

Vosbergen, Sandra; Mahieu, Guy R; Laan, Eva K; Kraaijenhagen, Roderik A; Jaspers, Monique WM

2014-01-01

Background Increasingly, Web-based health applications are developed for the prevention and management of chronic diseases. However, their reach and utilization is often disappointing. Qualitative evaluations post-implementation can be used to inform the optimization process and ultimately enhance their adoption. In current practice, such evaluations are mainly performed with end-user surveys. However, a review approach by experts in a focus group may be easier to administer and might provide similar results. Objective The aim of this study was to assess whether industrial design engineers in a focus group would address the same issues as end users in a Web-based survey when evaluating a commercial Web-based health risk assessment (HRA) with tailored feedback. Methods Seven Dutch companies used the HRA as part of their corporate health management strategy. Employees using the HRA (N=2289) and 10 independent industrial designers were invited to participate in the study. The HRA consisted of four components: (1) an electronic health questionnaire, (2) biometric measurements, (3) laboratory evaluation, and (4) individually tailored feedback generated by decision support software. After participating in the HRA as end users, both end users and designers evaluated the program. End users completed an evaluation questionnaire that included a free-text field. Designers participated in a focus group discussion. Constructs from user satisfaction and technology acceptance theories were used to categorize and compare the remarks from both evaluations. Results We assessed and qualitatively analyzed 294 remarks of 189 end users and 337 remarks of 6 industrial designers, pertaining to 295 issues in total. Of those, 137 issues were addressed in the end-user survey and 148 issues in the designer focus group. Only 7.3% (10/137) of the issues addressed in the survey were also addressed in the focus group. End users made more remarks about the usefulness of the HRA and prior expectations that were not met. Designers made more remarks about how the information was presented to end users, quality of the feedback provided by the HRA, recommendations on the marketing and on how to create more unity in the design of the HRA, and on how to improve the HRA based on these issues. Conclusions End-user surveys should not be substituted for expert focus groups. Issues identified by end users in the survey and designers in the focus group differed considerably, and the focus group produced a lot of new issues. The issues addressed in the focus group often focused on different aspects of user satisfaction and technology acceptance than those addressed by the survey participants; when they did focus on the same aspects, then the nature of issues differed considerably in content. PMID:24384408

Evaluating a web-based health risk assessment with tailored feedback: what does an expert focus group yield compared to a web-based end-user survey?

PubMed

Vosbergen, Sandra; Mahieu, Guy R; Laan, Eva K; Kraaijenhagen, Roderik A; Jaspers, Monique Wm; Peek, Niels

2014-01-02

Increasingly, Web-based health applications are developed for the prevention and management of chronic diseases. However, their reach and utilization is often disappointing. Qualitative evaluations post-implementation can be used to inform the optimization process and ultimately enhance their adoption. In current practice, such evaluations are mainly performed with end-user surveys. However, a review approach by experts in a focus group may be easier to administer and might provide similar results. The aim of this study was to assess whether industrial design engineers in a focus group would address the same issues as end users in a Web-based survey when evaluating a commercial Web-based health risk assessment (HRA) with tailored feedback. Seven Dutch companies used the HRA as part of their corporate health management strategy. Employees using the HRA (N=2289) and 10 independent industrial designers were invited to participate in the study. The HRA consisted of four components: (1) an electronic health questionnaire, (2) biometric measurements, (3) laboratory evaluation, and (4) individually tailored feedback generated by decision support software. After participating in the HRA as end users, both end users and designers evaluated the program. End users completed an evaluation questionnaire that included a free-text field. Designers participated in a focus group discussion. Constructs from user satisfaction and technology acceptance theories were used to categorize and compare the remarks from both evaluations. We assessed and qualitatively analyzed 294 remarks of 189 end users and 337 remarks of 6 industrial designers, pertaining to 295 issues in total. Of those, 137 issues were addressed in the end-user survey and 148 issues in the designer focus group. Only 7.3% (10/137) of the issues addressed in the survey were also addressed in the focus group. End users made more remarks about the usefulness of the HRA and prior expectations that were not met. Designers made more remarks about how the information was presented to end users, quality of the feedback provided by the HRA, recommendations on the marketing and on how to create more unity in the design of the HRA, and on how to improve the HRA based on these issues. End-user surveys should not be substituted for expert focus groups. Issues identified by end users in the survey and designers in the focus group differed considerably, and the focus group produced a lot of new issues. The issues addressed in the focus group often focused on different aspects of user satisfaction and technology acceptance than those addressed by the survey participants; when they did focus on the same aspects, then the nature of issues differed considerably in content.

Flat-Lens Focusing of Electron Beams in Graphene

PubMed Central

Tang, Yang; Cao, Xiyuan; Guo, Ran; Zhang, Yanyan; Che, Zhiyuan; Yannick, Fouodji T.; Zhang, Weiping; Du, Junjie

2016-01-01

Coupling electron beams carrying information into electronic units is fundamental in microelectronics. This requires precision manipulation of electron beams through a coupler with a good focusing ability. In graphene, the focusing of wide electron beams has been successfully demonstrated by a circular p-n junction. However, it is not favorable for information coupling since the focal length is so small that the focal spot locates inside the circular gated region, rather than in the background region. Here, we demonstrate that an array of gate-defined quantum dots, which has gradually changing lattice spacing in the direction transverse to propagation, can focus electrons outside itself, providing a possibility to make a coupler in graphene. The focusing effect can be understood as due to the gradient change of effective refractive indices, which are defined by the local energy band in a periodic potential. The strong focusing can be achieved by suitably choosing the lattice gradient and the layer number in the incident direction, offering an effective solution to precision manipulation of electron beams with wide electron energy range and high angular tolerance. PMID:27628099

Booming Development of Group IV–VI Semiconductors: Fresh Blood of 2D Family

PubMed Central

Zhou, Xing; Zhang, Qi; Gan, Lin; Li, Huiqiao; Xiong, Jie

2016-01-01

As an important component of 2D layered materials (2DLMs), the 2D group IV metal chalcogenides (GIVMCs) have drawn much attention recently due to their earth‐abundant, low‐cost, and environmentally friendly characteristics, thus catering well to the sustainable electronics and optoelectronics applications. In this instructive review, the booming research advancements of 2D GIVMCs in the last few years have been presented. First, the unique crystal and electronic structures are introduced, suggesting novel physical properties. Then the various methods adopted for synthesis of 2D GIVMCs are summarized such as mechanical exfoliation, solvothermal method, and vapor deposition. Furthermore, the review focuses on the applications in field effect transistors and photodetectors based on 2D GIVMCs, and extends to flexible devices. Additionally, the 2D GIVMCs based ternary alloys and heterostructures have also been presented, as well as the applications in electronics and optoelectronics. Finally, the conclusion and outlook have also been presented in the end of the review. PMID:27981008

Electron counting and a large family of two-dimensional semiconductors

NASA Astrophysics Data System (ADS)

Miao, Maosheng; Botana, Jorge; Zurek, Eva; Liu, Jingyao; Yang, Wen

Two-dimensional semiconductors (2DSC) are currently the focus of many studies, thanks to their novel and superior transport properties that may greatly influence future electronic devices. The potential applications of 2DSCs range from low-dimensional electronics, topological insulators and vallytronics all the way to novel photolysis. However, compared with the conventional semiconductors that are comprised of main group elements and cover a large range of band gaps and lattice constants, the choice of 2D materials is very limited. In this work, we propose and demonstrate a large family of 2DSCs, all adopting the same structure and consisting of only main group elements. Using advanced density functional calculations, we demonstrate the attainability of these materials, and show that they cover a large range of lattice constants, band gaps and band edge states, making them good candidate materials for heterojunctions. This family of two dimensional materials may be instrumental in the fabrication of 2DSC devices that may rival the currently employed 3D semiconductors.

Self-management Experiences of Older Korean Women With Urinary Incontinence: A Descriptive Qualitative Study Using Focus Groups.

PubMed

Park, Sunah; Yeoum, SoonGyo; Kim, Yoonjung; Kwon, Hye Jin

The purpose of this study was to explore the self-management experiences of Korean women with urinary incontinence (UI). Descriptive, qualitative study using focus groups. Twenty-two community-dwelling women, 65 years and older, participated in 3 focus-group interviews. Participants were recruited from 2 elderly halls and 1 senior welfare center in South Korea. Three focus group interviews comprising 6 to 8 individuals were conducted in a quiet venue at the elderly hall or senior welfare center. Two investigators performed the interviews; one acted as moderator and one as notetaker; interviews began with scripted open-ended questions. All interviews were electronically recorded and transcribed verbatim. Using an inductive thematic approach, data were first analyzed by the first and second authors; and all 4 authors contributed to coding and agreed on final themes. Korean women perceived UI as a loss of dignity, an odor problem, an uncontrollable disease, and a life impairment. Thematic analysis revealed 4 themes regarding the self-management experience of UI: preserving self-respect in the sociocultural environment, deodorizing the smell, keeping the secret of uncontrollability, and adjusting to an impaired life. Women in this study used various daily-living strategies to manage UI, but they mainly implemented strategies to keep UI a secret, including restrictions in activities of daily living. Educational approaches are needed to inform women with UI about more effective management skills.

Electronic health record tools' support of nurses' clinical judgment and team communication.

PubMed

Kossman, Susan P; Bonney, Leigh Ann; Kim, Myoung Jin

2013-11-01

Nurses need to quickly process information to form clinical judgments, communicate with the healthcare team, and guide optimal patient care. Electronic health records not only offer potential for enhanced care but also introduce unintended consequences through changes in workflow, clinical judgment, and communication. We investigated nurses' use of improvised (self-made) and electronic health record-generated cognitive artifacts on clinical judgment and team communication. Tanner's Clinical Judgment Model provided a framework and basis for questions in an online survey and focus group interviews. Findings indicated that (1) nurses rated self-made work lists and medication administration records highest for both clinical judgment and communication, (2) tools aided different dimensions of clinical judgment, and (3) interdisciplinary tools enhance team communication. Implications are that electronic health record tool redesign could better support nursing work.

Development of electronic medical record charting for hospital-based transfusion and apheresis medicine services: Early adoption perspectives

PubMed Central

Levy, Rebecca; Pantanowitz, Liron; Cloutier, Darlene; Provencher, Jean; McGirr, Joan; Stebbins, Jennifer; Cronin, Suzanne; Wherry, Josh; Fenton, Joseph; Donelan, Eileen; Johari, Vandita; Andrzejewski, Chester

2010-01-01

Background: Electronic medical records (EMRs) provide universal access to health care information across multidisciplinary lines. In pathology departments, transfusion and apheresis medicine services (TAMS) involved in direct patient care activities produce data and documentation that typically do not enter the EMR. Taking advantage of our institution's initiative for implementation of a paperless medical record, our TAMS division set out to develop an electronic charting (e-charting) strategy within the EMR. Methods: A focus group of our hospital's transfusion committee consisting of transfusion medicine specialists, pathologists, residents, nurses, hemapheresis specialists, and information technologists was constituted and charged with the project. The group met periodically to implement e-charting TAMS workflow and produced electronic documents within the EMR (Cerner Millenium) for various service line functions. Results: The interdisciplinary working group developed and implemented electronic versions of various paper-based clinical documentation used by these services. All electronic notes collectively gather and reside within a unique Transfusion Medicine Folder tab in the EMR, available to staff with access to patient charts. E-charting eliminated illegible handwritten notes, resulted in more consistent clinical documentation among staff, and provided greater realered. However, minor updates and corrections to documents as well as select work re-designs were required for optimal use of e-charting-time review/access of hemotherapy practices. No major impediments to workflow or inefficiencies have been encount by these services. Conclusion: Documentation of pathology subspecialty activities such as TAMS can be successfully incorporated into the EMR. E-charting by staff enhances communication and helps promote standardized documentation of patient care within and across service lines. Well-constructed electronic documents in the EMR may also enhance data mining, quality improvement, and biovigilance monitoring activities. PMID:20805955

3D structure of eukaryotic flagella/cilia by cryo-electron tomography.

PubMed

Ishikawa, Takashi

2013-01-01

Flagella/cilia are motile organelles with more than 400 proteins. To understand the mechanism of such complex systems, we need methods to describe molecular arrange-ments and conformations three-dimensionally in vivo. Cryo-electron tomography enabled us such a 3D structural analysis. Our group has been working on 3D structure of flagella/cilia using this method and revealed highly ordered and beautifully organized molecular arrangement. 3D structure gave us insights into the mechanism to gener-ate bending motion with well defined waveforms. In this review, I summarize our recent structural studies on fla-gella/cilia by cryo-electron tomography, mainly focusing on dynein microtubule-based ATPase motor proteins and the radial spoke, a regulatory protein complex.

3D structure of eukaryotic flagella/cilia by cryo-electron tomography

PubMed Central

Ishikawa, Takashi

2013-01-01

Flagella/cilia are motile organelles with more than 400 proteins. To understand the mechanism of such complex systems, we need methods to describe molecular arrange-ments and conformations three-dimensionally in vivo. Cryo-electron tomography enabled us such a 3D structural analysis. Our group has been working on 3D structure of flagella/cilia using this method and revealed highly ordered and beautifully organized molecular arrangement. 3D structure gave us insights into the mechanism to gener-ate bending motion with well defined waveforms. In this review, I summarize our recent structural studies on fla-gella/cilia by cryo-electron tomography, mainly focusing on dynein microtubule-based ATPase motor proteins and the radial spoke, a regulatory protein complex. PMID:27493552

Collaborative designing and job satisfaction of airplane manufacturing engineers: A case study

NASA Astrophysics Data System (ADS)

Johnson, Michael David, Sr.

The group III-nitride system of materials has had considerable commercial success in recent years in the solid state lighting (SSL) and power electronics markets. The need for high efficient general lighting applications has driven research into InGaN based blue light emitting diodes (LEDs), and demand for more efficient power electronics for telecommunications has driven research into AlGaN based high electron mobility transistors (HEMTs). However, the group III-nitrides material properties make them attractive for several other applications that have not received as much attention. This work focuses on developing group III-nitride based devices for novel applications. GaN is a robust, chemically inert, piezoelectric material, making it an ideal candidate for surface acoustic wave (SAW) devices designed for high temperature and/or harsh environment sensors. In this work, SAW devices based on GaN are developed for use in high temperature gas or chemical sensor applications. To increase device sensitivity, while maintaining a simple one-step photolithography fabrication process, devices were designed to operate at high harmonic frequencies. This allows for GHz regime operation without sub-micron fabrication. One potential market for this technology is continuous emissions monitoring of combustion gas vehicles. In addition to SAW devices, high electron mobility transistors (HEMTs) were developed. The epitaxial structure was characterized and the 2-D electron gas concentrations were simulated and compared to experimental results. Device fabrication processes were developed and are outlined. Fabricated devices were electrically measured and device performance is discussed.

Wiggler plane focusing in a linear free electron laser

DOEpatents

Scharlemann, Ernst T.

1988-01-01

Free electron laser apparatus that provides a magnetic centering force to turn or focus a non-axial electron toward the longitudinal axis as desired. The focusing effect is provided by wiggler magnet pole faces that are approximately parabolically shaped.

Challenging Density Functional Theory Calculations with Hemes and Porphyrins.

PubMed

de Visser, Sam P; Stillman, Martin J

2016-04-07

In this paper we review recent advances in computational chemistry and specifically focus on the chemical description of heme proteins and synthetic porphyrins that act as both mimics of natural processes and technological uses. These are challenging biochemical systems involved in electron transfer as well as biocatalysis processes. In recent years computational tools have improved considerably and now can reproduce experimental spectroscopic and reactivity studies within a reasonable error margin (several kcal·mol(-1)). This paper gives recent examples from our groups, where we investigated heme and synthetic metal-porphyrin systems. The four case studies highlight how computational modelling can correctly reproduce experimental product distributions, predicted reactivity trends and guide interpretation of electronic structures of complex systems. The case studies focus on the calculations of a variety of spectroscopic features of porphyrins and show how computational modelling gives important insight that explains the experimental spectra and can lead to the design of porphyrins with tuned properties.

Post-focus expansion of ion beams for low fluence and large area MeV ion irradiation: Application to human brain tissue and electronics devices

NASA Astrophysics Data System (ADS)

Whitlow, Harry J.; Guibert, Edouard; Jeanneret, Patrick; Homsy, Alexandra; Roth, Joy; Krause, Sven; Roux, Adrien; Eggermann, Emmanuel; Stoppini, Luc

2017-08-01

Irradiation with ∼3 MeV proton fluences of 106-109 protons cm-2 have been applied to study the effects on human brain tissue corresponding to single-cell irradiation doses and doses received by electronic components in low-Earth orbit. The low fluence irradiations were carried out using a proton microbeam with the post-focus expansion of the beam; a method developed by the group of Breese [1]. It was found from electrophysiological measurements that the mean neuronal frequency of human brain tissue decreased to zero as the dose increased to 0-1050 Gy. Enhancement-mode MOSFET transistors exhibited a 10% reduction in threshold voltage for 2.7 MeV proton doses of 10 Gy while a NPN bipolar transistor required ∼800 Gy to reduce the hfe by 10%, which is consistent the expected values.

CePt2In7: Shubnikov-de Haas measurements on micro-structured samples under high pressures

NASA Astrophysics Data System (ADS)

Kanter, J.; Moll, P.; Friedemann, S.; Alireza, P.; Sutherland, M.; Goh, S.; Ronning, F.; Bauer, E. D.; Batlogg, B.

2014-03-01

CePt2In7 belongs to the CemMnIn3 m + 2 n heavy fermion family, but compared to the Ce MIn5 members of this group, exhibits a more two dimensional electronic structure. At zero pressure the ground state is antiferromagnetically ordered. Under pressure the antiferromagnetic order is suppressed and a superconducting phase is induced, with a maximum Tc above a quantum critical point around 31 kbar. To investigate the changes in the Fermi Surface and effective electron masses around the quantum critical point, Shubnikov-de Haas measurements were conducted under high pressures in an anvil cell. The samples were micro-structured and contacted using a Focused Ion Beam (FIB). The Focused Ion Beam enables sample contacting and structuring down to a sub-micrometer scale, making the measurement of several samples with complex shapes and multiple contacts on a single anvil feasible.

Building blocks of the GIPU, Italian Group of Ultrastructural Pathology.

PubMed

Papa, V; Costa, R; Cenacchi, G

2016-06-01

The Italian Group of Ultrastructural Pathology, GIPU, is a scientific organization committed to promote the art and science of Electron Microscopy (EM) in the pathology field in Italy, sharing its professional work with a public audience. The history of the GIPU goes back to 1990s when a founder group set up the Italian Group of Ultrastructural Diagnostic (GIDU) in Milan. The central focus of annual meetings was on EM, transmission and scanning one, about interesting cases in which it was instrumental in diagnosis. In the 1990s, ultrastructure was still the gold standard for cell/tissue morphology, biology, biochemistry, diagnostic pathology, and played an important role in tailored medicine. So, especially transmission EM, could play a critical role in the diagnosis of various diseases as in human as in animals. Best topics of the annual scientific meetings of the group were kidney, muscle, heart, and liver pathology, infertility, neuropathology, respiratory diseases, skin diseases, storage diseases, tumor pathology, infectious diseases, parasitology, veterinary pathology and more. Nowadays, EM is a method whose importance for diagnosis and pathology is well established: it is still essential in several pathologies, helpful in others, and welcome implemented in eclectic research pathology. Omission of EM likely makes the studies suboptimal and wasteful. So, from 2007 the name of the group has been changed to the Italian Group of Ultrastructural Pathology (GIPU) to favor broader applications of EM also to pathology research field. During last decades, GIDU/GIPU has interconnected with international (Society for Ultrastructural Pathology) and european (European Society of Pathology and Joint Meeting with the European Electron Microscopy Working Group) scientific society, according its statute. By 1991, GIPU has had 40 members: membership in this Group is still open and welcome to all pathologists, PhD, electron microscopy technologists, pathology trainees, and researchers interested in pathology and electron microscopy. © Copyright Società Italiana di Anatomia Patologica e Citopatologia Diagnostica, Divisione Italiana della International Academy of Pathology.

Using ePortfolios to Measure Student Learning in a Graduate Preparation Program in Higher Education

ERIC Educational Resources Information Center

Janosik, Steven M.; Frank, Tara E.

2013-01-01

Ten second-year master's students in a higher education program participated in this study, which was designed to assess their experience with an electronic portfolio that had been introduced recently as a primary component of their comprehensive exam. This qualitative study used a focus group and long-interview methods for data collection.…

Medical care providers' perspectives on dental information needs in electronic health records.

PubMed

Acharya, Amit; Shimpi, Neel; Mahnke, Andrea; Mathias, Richard; Ye, Zhan

2017-05-01

The authors conducted this study to identify the most relevant patient dental information in a medical-dental integrated electronic health record (iEHR) necessary for medical care providers to inform holistic treatment. The authors collected input from a diverse sample of 65 participants from a large, regional health system representing 13 medical specialties and administrative units. The authors collected feedback from participants through 11 focus group sessions. Two independent reviewers analyzed focus group transcripts to identify major and minor themes. The authors identified 336 of 385 annotations that most medical care providers coded as relevant. Annotations strongly supporting relevancy to clinical practice aligned with 18 major thematic categories, with the top 6 categories being communication, appointments, system design, medications, treatment plan, and dental alerts. Study participants identified dental data of highest relevance to medical care providers and recommended implementation of user-friendly access to dental data in iEHRs as crucial to holistic care delivery. Identification of the patients' dental information most relevant to medical care providers will inform strategies for improving the integration of that information into the medical-dental iEHR. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

The study of electrochemical cell taught by problem-based learning

NASA Astrophysics Data System (ADS)

Srichaitung, Paisan

2018-01-01

According to the teaching activity of Chemistry, researcher found that students were not able to seek self knowledge even applied knowledge to their everyday life. Therefore, the researcher is interested in creating an activity to have students constructed their knowledge, science process skills, and can apply knowledge in their everyday life. The researcher presented form of teaching activity of electrochemical cell by using problem-based learning for Mathayom five students of Thai Christian School. The teaching activity focused on electron transfer in galvanic cell. In this activity, the researcher assigned students to design the electron transfer in galvanic cell using any solution that could light up the bulb. Then students were separated into a group of two, which were total seven groups. Each group of students searched the information about the electron transfer in galvanic cell from books, internet, or other sources of information. After students received concepts, or knowledge they searched for, Students designed and did the experiment. Finally, the students in each groups had twenty minutes to give a presentation in front of the classroom about the electron transfer in galvanic using any solution to light up the bulb with showing the experiment, and five minutes to answer their classmates' questions. Giving the presentation took four periods with total seven groups. After students finished their presentation, the researcher had students discussed and summarized the teaching activity's main idea of electron transfer in galvanic. Then, researcher observed students' behavior in each group found that 85.7 percentages of total students developed science process skills, and transferred their knowledge through presentation completely. When students done the post test, the researcher found that 92.85 percentages of total students were able to explain the concept of galvanic cell, described the preparation and the selection of experimental equipment. Furthermore, students constructed their skills, scientific process, and seek self knowledge which made them seek the choices to solve problems variously. This Research using problem-based learning can be applied to teaching activity in other subjects.

Single Electron Tunneling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruggiero, Steven T.

Financial support for this project has led to advances in the science of single-electron phenomena. Our group reported the first observation of the so-called ''Coulomb Staircase'', which was produced by tunneling into ultra-small metal particles. This work showed well-defined tunneling voltage steps of width e/C and height e/RC, demonstrating tunneling quantized on the single-electron level. This work was published in a now well-cited Physical Review Letter. Single-electron physics is now a major sub-field of condensed-matter physics, and fundamental work in the area continues to be conducted by tunneling in ultra-small metal particles. In addition, there are now single-electron transistors thatmore » add a controlling gate to modulate the charge on ultra-small photolithographically defined capacitive elements. Single-electron transistors are now at the heart of at least one experimental quantum-computer element, and single-electron transistor pumps may soon be used to define fundamental quantities such as the farad (capacitance) and the ampere (current). Novel computer technology based on single-electron quantum dots is also being developed. In related work, our group played the leading role in the explanation of experimental results observed during the initial phases of tunneling experiments with the high-temperature superconductors. When so-called ''multiple-gap'' tunneling was reported, the phenomenon was correctly identified by our group as single-electron tunneling in small grains in the material. The main focus throughout this project has been to explore single electron phenomena both in traditional tunneling formats of the type metal/insulator/particles/insulator/metal and using scanning tunneling microscopy to probe few-particle systems. This has been done under varying conditions of temperature, applied magnetic field, and with different materials systems. These have included metals, semi-metals, and superconductors. Amongst a number of results, we have verified that clusters of down to one, two, and three metal atoms can be identified with single-electron techniques. We have also, extended the regime of single-electron phenomenology through the observation of single-electron effects in metal droplets in the high-conductance regime.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zou Hairong; Zou Jianzhong; Wang Yan

This study was to evaluate the effect of pre-exposure lower-intensity focused ultrasound(US), or LIFU, in high-intensity focused ultrasound(HIFU) ablation of rabbit VX2 liver tumors . Liver VX2 tumor models were established in 30 rabbits, which were divided randomly into two groups. The liver tumors of rabbits in Group A underwent single HIFU ablation; those in Group B were given LIFU exposure before HIFU treatment. Five rabbits from each of the two groups were sacrificed at 0 hours, 3 days, and 7 days after HIFU ablation. Tissue samples that included targeted and short-range sounding (s-RS, within 5 mm of the targeted)more » and far-range sounding (f-RS, more than 5 mm of the targeted) tissues were observed using light microscope and transmission electron microscopy. The histological examination indicated that not only the targeted tumor cells became irreversible damage, but also the short-range sounding tumors were severely damaged by the HIFU with LIFU pre-exposure in group B. It is concluded that LIFU pre-exposure can enhance the effects of HIFU ablation on the destruction of cell ultrastructures and can enlarge the region of HIFU ablation.« less

Inverse photoelectron spectrometer with magnetically focused electron gun

NASA Technical Reports Server (NTRS)

Krainsky, Isay L.

1991-01-01

An inverse photoelectron spectrometer is described which is based on the design of a magnetically focused low energy electron gun. The magnetic lens extends its field over a relatively large segment of the electron trajectory, which could provide a better focusing effect on a high-current-density low-velocity electron beam, providing the magnetic field in the vicinity of the target is reduced sufficiently to preserve the collinearity of the beam. In order to prove the concept, ray tracing is conducted using the Herrmannsfeldt program for solving electron trajectories in electrostatic and magnetostatic focusing systems. The program allows the calculation of the angles of the electron trajectories with the z axis, at the target location. The results of the ray-tracing procedure conducted for this gun are discussed. Some of the advantages of the magnetic focusing are also discussed.

Understanding children's sedentary behaviour: a qualitative study of the family home environment.

PubMed

Granich, Joanna; Rosenberg, Michael; Knuiman, Matthew; Timperio, Anna

2010-04-01

Electronic media (EM) (television, electronic games and computer) use has been associated with overweight and obesity among children. Little is known about the time spent in sedentary behaviour (SB) among children within the family context. The aim of this study was to explore how the family home environment may influence children's electronic-based SB. Focus groups and family interviews were conducted with 11- to 12-year old children (n = 54) and their parents (n = 38) using a semi-structured discussion guide. Transcripts were analysed using a thematic content approach. A brief self-completed questionnaire was also used to measure leisure behaviour and electronic devices at home. Children incorporated both sedentary and physical activities into their weekly routine. Factors influencing children's EM use included parent and sibling modelling and reinforcement, personal cognitions, the physical home environment and household EM use rules and restrictions. Participants were not concerned about the excessive time children spent with EM. This under-recognition emerged as a personal influencing factor and was viewed as a major barrier to modifying children's electronic-based SB. Efforts to reduce SB in children should focus on the influencing factors that reciprocally interact within the family home. An emphasis on increasing awareness about the risks associated with spending excessive time in screen-based activities should be a priority when developing intervention strategies aimed at modifying the time children spend in SB.

One of several 'toys' for smoking: young adult experiences with electronic cigarettes in New York City.

PubMed

McDonald, Emily Anne; Ling, Pamela M

2015-11-01

This qualitative research explores the use of electronic cigarettes and other similar 'vapor' delivery devices among young adults in New York City. We employed 17 focus groups followed by 12 semistructured interviews to understand the beliefs, opinions and practices related to the use of electronic cigarettes among young adult smokers (N=87). Participants were mainly daily (52%) and non-daily (41%) smokers. While experimentation with electronic cigarette devices was frequently reported, participants related an overall lack of information about the devices and what they did know often reflected messages in e-cigarette marketing campaigns. Participants also used their own bodily sensations as a way to gauge potential risks and benefits of the products. Finally, young adults, steeped in a culture of personal technologies, perceived e-cigarettes as one more 'toy' among other technologies integrated into their everyday lives. E-cigarettes were also frequently used with other tobacco products, including conventional cigarettes. Our research indicates that public health campaigns may be needed to counter current industry marketing and inform the public that electronic cigarettes are currently unregulated, understudied and contain toxicants and carcinogens. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Evaluating the Linguistic Appropriateness and Cultural Sensitivity of a Self-Report System for Spanish-Speaking Patients with Cancer

PubMed Central

Gonzalez, Laura; Negrón, Rosalyn; Berry, Donna L.

2014-01-01

Spanish speakers in the United States encounter numerous communication barriers during cancer treatment. Communication-focused interventions may help Spanish speakers communicate better with healthcare providers and manage symptoms and quality of life issues (SQOL). For this study, we developed a Spanish version of the electronic self-report assessment for cancer (ESRA-C), a web-based program that helps people with cancer report, track, and manage cancer-related SQOL. Four methods were used to evaluate the Spanish version. Focus groups and cognitive interviews were conducted with 51 Spanish-speaking individuals to elicit feedback. Readability was assessed using the Fry readability formula. The cultural sensitivity assessment tool was applied by three bilingual, bicultural reviewers. Revisions were made to personalize the introduction using a patient story and photos and to simplify language. Focus group participants endorsed changes to the program in a second round of focus groups. Cultural sensitivity of the program was scored unacceptable (x¯=3.0) for audiovisual material and acceptable (x¯=3.0) for written material. Fry reading levels ranged from 4th to 10th grade. Findings from this study provide several next steps to refine ESRA-C for Spanish speakers with cancer. PMID:25045535

Quantitative Simulation of QARBM Challenge Events During Radiation Belt Enhancements

NASA Astrophysics Data System (ADS)

Li, W.; Ma, Q.; Thorne, R. M.; Bortnik, J.; Chu, X.

2017-12-01

Various physical processes are known to affect energetic electron dynamics in the Earth's radiation belts, but their quantitative effects at different times and locations in space need further investigation. This presentation focuses on discussing the quantitative roles of various physical processes that affect Earth's radiation belt electron dynamics during radiation belt enhancement challenge events (storm-time vs. non-storm-time) selected by the GEM Quantitative Assessment of Radiation Belt Modeling (QARBM) focus group. We construct realistic global distributions of whistler-mode chorus waves, adopt various versions of radial diffusion models (statistical and event-specific), and use the global evolution of other potentially important plasma waves including plasmaspheric hiss, magnetosonic waves, and electromagnetic ion cyclotron waves from all available multi-satellite measurements. These state-of-the-art wave properties and distributions on a global scale are used to calculate diffusion coefficients, that are then adopted as inputs to simulate the dynamical electron evolution using a 3D diffusion simulation during the storm-time and the non-storm-time acceleration events respectively. We explore the similarities and differences in the dominant physical processes that cause radiation belt electron dynamics during the storm-time and non-storm-time acceleration events. The quantitative role of each physical process is determined by comparing against the Van Allen Probes electron observations at different energies, pitch angles, and L-MLT regions. This quantitative comparison further indicates instances when quasilinear theory is sufficient to explain the observed electron dynamics or when nonlinear interaction is required to reproduce the energetic electron evolution observed by the Van Allen Probes.

Wiggler plane focusing in a linear free electron laser

DOEpatents

Scharlemann, E.T.

1985-11-21

This disclosure describes a free electron laser apparatus that provides a magnetic centering force to turn or focus a non-axial electron toward the longitudinal axis as desired. The focusing effect is provided by wiggler magnet pole faces that are approximately parabolically shaped.

Intraoperative radiation therapy using mobile electron linear accelerators: report of AAPM Radiation Therapy Committee Task Group No. 72.

PubMed

Beddar, A Sam; Biggs, Peter J; Chang, Sha; Ezzell, Gary A; Faddegon, Bruce A; Hensley, Frank W; Mills, Michael D

2006-05-01

Intraoperative radiation therapy (IORT) has been customarily performed either in a shielded operating suite located in the operating room (OR) or in a shielded treatment room located within the Department of Radiation Oncology. In both cases, this cancer treatment modality uses stationary linear accelerators. With the development of new technology, mobile linear accelerators have recently become available for IORT. Mobility offers flexibility in treatment location and is leading to a renewed interest in IORT. These mobile accelerator units, which can be transported any day of use to almost any location within a hospital setting, are assembled in a nondedicated environment and used to deliver IORT. Numerous aspects of the design of these new units differ from that of conventional linear accelerators. The scope of this Task Group (TG-72) will focus on items that particularly apply to mobile IORT electron systems. More specifically, the charges to this Task Group are to (i) identify the key differences between stationary and mobile electron linear accelerators used for IORT, (ii) describe and recommend the implementation of an IORT program within the OR environment, (iii) present and discuss radiation protection issues and consequences of working within a nondedicated radiotherapy environment, (iv) describe and recommend the acceptance and machine commissioning of items that are specific to mobile electron linear accelerators, and (v) design and recommend an efficient quality assurance program for mobile systems.

Synthesis and antioxidant activity of curcumin analogs.

PubMed

Zheng, Qu-Tong; Yang, Ze-Hua; Yu, Liu-Ying; Ren, Yu-Yan; Huang, Qiu-Xia; Liu, Qiu; Ma, Xiang-Yu; Chen, Zi-Kang; Wang, Zong-Bao; Zheng, Xing

2017-05-01

Numerous biological activities including antioxidant, antitumor, anti-inflammation, and antivirus of the natural product curcumin were reported. However, the clinical application of it was significantly limited by its instability, poor solubility, less body absorbing, and low bioavailability. This review focuses on the structure modification and antioxidant activity evaluation of curcumin. To study the structure-activity relationship (SAR), five series of curcumin analogs were synthesized and their antioxidant activity were evaluated in vitro. The results showed that electron-donating groups, especially the phenolic hydroxyl group are an essential component to improve the antioxidant activity.

Patient and public views about the security and privacy of Electronic Health Records (EHRs) in the UK: results from a mixed methods study.

PubMed

Papoutsi, Chrysanthi; Reed, Julie E; Marston, Cicely; Lewis, Ruth; Majeed, Azeem; Bell, Derek

2015-10-14

Although policy discourses frame integrated Electronic Health Records (EHRs) as essential for contemporary healthcare systems, increased information sharing often raises concerns among patients and the public. This paper examines patient and public views about the security and privacy of EHRs used for health provision, research and policy in the UK. Sequential mixed methods study with a cross-sectional survey (in 2011) followed by focus group discussions (in 2012-2013). Survey participants (N = 5331) were recruited from primary and secondary care settings in West London (UK). Complete data for 2761 (51.8 %) participants were included in the final analysis for this paper. The survey results were discussed in 13 focus groups with people living with a range of different health conditions, and in 4 mixed focus groups with patients, health professionals and researchers (total N = 120). Qualitative data were analysed thematically. In the survey, 79 % of participants reported that they would worry about the security of their record if this was part of a national EHR system and 71 % thought the National Health Service (NHS) was unable to guarantee EHR safety at the time this work was carried out. Almost half (47 %) responded that EHRs would be less secure compared with the way their health record was held at the time of the survey. Of those who reported being worried about EHR security, many would nevertheless support their development (55 %), while 12 % would not support national EHRs and a sizeable proportion (33 %) were undecided. There were also variations by age, ethnicity and education. In focus group discussions participants weighed up perceived benefits against potential security and privacy threats from wider sharing of information, as well as discussing other perceived risks: commercial exploitation, lack of accountability, data inaccuracies, prejudice and inequalities in health provision. Patient and public worries about the security risks associated with integrated EHRs highlight the need for intensive public awareness and engagement initiatives, together with the establishment of trustworthy security and privacy mechanisms for health information sharing.

European Cooperation for Space Standardization- THe New Standard for Electric and Electronic ECSS-E-ST-20-C

NASA Astrophysics Data System (ADS)

Mourra, Olivier; Blancquaert, Thierry; Signorini, Carla; Tonicello, Ferdinando

2008-09-01

The European Cooperation for Space Standardization is an initiative established to develop and maintain a coherent, single set of user-friendly standards for use in all European space activities [1].The standard documents are today grouped in 4 families: Space Project Management, Space ProductAssurance, Space Engineering, and General.The Space Engineering family contains around 60 standards covering several domains. Among them, the ",Electrical and Electronic Standard" has a long history, starting with a PSS document initiated more than 20 years ago [2][3].In 2007 and 2008, the Electrical and Electronic Standard has been reviewed by the European Space Agency, National Space Agencies and European space industries. The new version (ECSS-E-ST-20-C) has just been released. It is proposed to present this new standard and to illustrate a set of major and important power electronic requirements with relevant rationales and technical explanations.The first part of the paper will focus on the main modifications with respect to the existing ECSS-E-20A standard.The other parts will focus on a set of major and important requirements present in the new ECSS-E-ST-20C. The rationales justifying these requirements will be given and sometimes illustrated with specific examples.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

DOE PAGES

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.; ...

2017-12-27

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. Our method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. We could use large aspect ratio rectangular capillaries to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. Our method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. We could use large aspect ratio rectangular capillaries to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

NASA Astrophysics Data System (ADS)

Bagdasarov, G. A.; Bobrova, N. A.; Boldarev, A. S.; Olkhovskaya, O. G.; Sasorov, P. V.; Gasilov, V. A.; Barber, S. K.; Bulanov, S. S.; Gonsalves, A. J.; Schroeder, C. B.; van Tilborg, J.; Esarey, E.; Leemans, W. P.; Levato, T.; Margarone, D.; Korn, G.; Kando, M.; Bulanov, S. V.

2017-12-01

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique, is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus on the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. Large aspect ratio rectangular capillaries might be used to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

Electron induced surface reactions of (η5-C5H5)Fe(CO)2Mn(CO)5, a potential heterobimetallic precursor for focused electron beam induced deposition (FEBID).

PubMed

Unlu, Ilyas; Spencer, Julie A; Johnson, Kelsea R; Thorman, Rachel M; Ingólfsson, Oddur; McElwee-White, Lisa; Fairbrother, D Howard

2018-03-14

Electron-induced surface reactions of (η 5 -C 5 H 5 )Fe(CO) 2 Mn(CO) 5 were explored in situ under ultra-high vacuum conditions using X-ray photoelectron spectroscopy and mass spectrometry. The initial step involves electron-stimulated decomposition of adsorbed (η 5 -C 5 H 5 )Fe(CO) 2 Mn(CO) 5 molecules, accompanied by the desorption of an average of five CO ligands. A comparison with recent gas phase studies suggests that this precursor decomposition step occurs by a dissociative ionization (DI) process. Further electron irradiation decomposes the residual CO groups and (η 5 -C 5 H 5 , Cp) ligand, in the absence of any ligand desorption. The decomposition of CO ligands leads to Mn oxidation, while electron stimulated Cp decomposition causes all of the associated carbon atoms to be retained in the deposit. The lack of any Fe oxidation is ascribed to either the presence of a protective carbonaceous matrix around the Fe atoms created by the decomposition of the Cp ligand, or to desorption of both CO ligands bound to Fe in the initial decomposition step. The selective oxidation of Mn in the absence of any Fe oxidation suggests that the fate of metal atoms in mixed-metal precursors for focused electron beam induced deposition (FEBID) will be sensitive to the nature and number of ligands in the immediate coordination sphere. In related studies, the composition of deposits created from (η 5 -C 5 H 5 )Fe(CO) 2 Mn(CO) 5 under steady state deposition conditions, representative of those used to create nanostructures in electron microscopes, were measured and found to be qualitatively consistent with predictions from the UHV surface science studies.

Miniaturized Environmental Scanning Electron Microscope for In Situ Planetary Studies

NASA Technical Reports Server (NTRS)

Gaskin, Jessica; Abbott, Terry; Medley, Stephanie; Gregory, Don; Thaisen, Kevin; Taylor , Lawrence; Ramsey, Brian; Jerman, Gregory; Sampson, Allen; Harvey, Ralph

2010-01-01

The exploration of remote planetary surfaces calls for the advancement of low power, highly-miniaturized instrumentation. Instruments of this nature that are capable of multiple types of analyses will prove to be particularly useful as we prepare for human return to the moon, and as we continue to explore increasingly remote locations in our Solar System. To this end, our group has been developing a miniaturized Environmental-Scanning Electron Microscope (mESEM) capable of remote investigations of mineralogical samples through in-situ topographical and chemical analysis on a fine scale. The functioning of an SEM is well known: an electron beam is focused to nanometer-scale onto a given sample where resulting emissions such as backscattered and secondary electrons, X-rays, and visible light are registered. Raster scanning the primary electron beam across the sample then gives a fine-scale image of the surface topography (texture), crystalline structure and orientation, with accompanying elemental composition. The flexibility in the types of measurements the mESEM is capable of, makes it ideally suited for a variety of applications. The mESEM is appropriate for use on multiple planetary surfaces, and for a variety of mission goals (from science to non-destructive analysis to ISRU). We will identify potential applications and range of potential uses related to planetary exploration. Over the past few of years we have initiated fabrication and testing of a proof-of-concept assembly, consisting of a cold-field-emission electron gun and custom high-voltage power supply, electrostatic electron-beam focusing column, and scanning-imaging electronics plus backscatter detector. Current project status will be discussed. This effort is funded through the NASA Research Opportunities in Space and Earth Sciences - Planetary Instrument Definition and Development Program.

Interventions to increase physician efficiency and comfort with an electronic health record system.

PubMed

Jalota, L; Aryal, M R; Mahmood, M; Wasser, T; Donato, A

2015-01-01

To determine comfort when using the Electronic Health Record (EHR) and increase in documentation efficiency after an educational intervention for physicians to improve their transition to a new EHR. This study was a single-center randomized, parallel, non-blinded controlled trial of real-time, focused educational interventions by physician peers in addition to usual training in the intervention arm compared with usual training in the control arm. Participants were 44 internal medicine physicians and residents stratified to groups using a survey of comfort with electronic media during rollout of a system-wide EHR and order entry system. Outcomes were median time to complete a progress note, notes completed after shift, and comfort with EHR at 20 and 40 shifts. In the intervention group, 73 education sessions averaging 14.4 (SD: 7.7) minutes were completed with intervention group participants, who received an average of 3.47 (SD: 2.1) interventions. Intervention group participants decreased their time to complete a progress note more quickly than controls over 30 shifts (p < 0.001) and recorded significantly fewer progress notes after scheduled duty hours (77 versus 292, p < 0.001). Comfort with EHRs increased significantly in both groups from baseline but did not differ significantly by group. Intervention group participants felt that the intervention was more helpful than their standard training (3.47 versus 1.95 on 4-point scale). Physicians teaching physicians during clinical work improved physician efficiency but not comfort with EHRs. More study is needed to determine best methods to assist those most challenged with new EHR rollouts.

Molecular Spintronics: Theory of Spin-Dependent Electron Transport in Fe/BDT/Fe Molecular Wire Systems

NASA Astrophysics Data System (ADS)

Dalgleish, Hugh; Kirczenow, George

2004-03-01

Metal/Molecule/Metal junction systems forming molecular wires are currently the focus of intense study. Recently, spin-dependent electron transport in molecular wires with magnetic Ni electrodes has been studied theoretically, and spin-valve effects have been predicted.* Here we explore theoretically another magnetic molecular wire system, namely, ferromagnetic Fe nano-contacts bridged with 1,4-benzene-dithiolate (BDT). We estimate the essential structural and electronic parameters for this system based on ab initio density functional calculations (DFT) for some simple model systems involving thiol groups and Fe clusters as well as semi-empirical considerations and the known electronic structure of bulk Fe. We then use Lippmann-Schwinger and Green's function techniques together with the Landauer formalism to study spin-dependent transport. *E. G. Emberly and G. Kirczenow, Chem. Phys. 281, 311 (2002); R. Pati, L. Senapati, P.M. Ajayan and S.K. Nayak, Phys. Rev. B68, 100407 (2003).

Ionospheric responses during equinox and solstice periods over Turkey

NASA Astrophysics Data System (ADS)

Karatay, Secil; Cinar, Ali; Arikan, Feza

2017-11-01

Ionospheric electron density is the determining variable for investigation of the spatial and temporal variations in the ionosphere. Total Electron Content (TEC) is the integral of the electron density along a ray path that indicates the total variability through the ionosphere. Global Positioning System (GPS) recordings can be utilized to estimate the TEC, thus GPS proves itself as a useful tool in monitoring the total variability of electron distribution within the ionosphere. This study focuses on the analysis of the variations of ionosphere over Turkey that can be grouped into anomalies during equinox and solstice periods using TEC estimates obtained by a regional GPS network. It is observed that noon time depletions in TEC distributions predominantly occur in winter for minimum Sun Spots Numbers (SSN) in the central regions of Turkey which also exhibit high variability due to midlatitude winter anomaly. TEC values and ionospheric variations at solstice periods demonstrate significant enhancements compared to those at equinox periods.

Perceptions of primary care staff on a regional data quality intervention in Australian general practice: a qualitative study.

PubMed

Ghosh, Abhijeet; McCarthy, Sandra; Halcomb, Elizabeth

2016-04-26

Technological advances in clinical data capturing and storage systems have led to recent attempts at disease surveillance and region specific population health planning through regularly collected primary care administrative clinical data. However the accuracy and comprehensiveness of primary care health records remain questionable. We aimed to explore the perceptions and experiences of general practice staff in maintaining accurate patient health data within clinical software used in primary care settings of regional NSW. Focus groups were conducted with general practitioners, practice nurses and practice administrative staff from 17 practices in the Illawarra-Shoalhaven region of the state of New South Wales (NSW) in Australia that had participated in the Sentinel Practices Data Sourcing (SPDS) project - a general practice based chronic disease surveillance and data quality improvement study. A total of 25 respondents that included 12 general practitioners (GPs) and 13 practice staff participated in the 6 focus groups. Focus groups were audio-recorded and transcribed verbatim. Thematic analysis of the data was undertaken. Five key themes emerged from the data. Firstly, the theme of resourcing data management raised issues of time constraints, the lack of a dedicated data management role and the importance of multidisciplinary involvement, including a data champion. The need for incentives was identified as being important to motivate ongoing commitment to maintaining data quality. However, quality of software packages, including coding issues and software limitations and information technology skills were seen as key barriers. The final theme provided insight into the lessons learnt from the project and the increased awareness of the importance of data quality amongst practice staff. The move towards electronic methods of maintaining general practice patient records offers significant potential benefits in terms of both patient care and monitoring of health status and health needs within the community. However, this study has reinforced the importance of human factors in the maintenance of such datasets. To achieve optimal benefits of electronic health and medical records for patient care and for population health planning purposes, it is extremely essential to address the barriers that clinicians and other staff face in maintaining complete and correct primary care patient electronic health and medical information.

Ultrastructure study of hair damage after ultraviolet irradiation.

PubMed

Zuel-Fakkar, Nehal Mohamed; El Khateeb, Ekramy Ahmed; Cousha, Hala Sobhi; Hamed, Dina Mohamed

2013-12-01

Natural ultraviolet exposure induces hair damage, which is difficult to avoid. Most of the research work is focused on the effect of ultraviolet on the epidermis, dermis as well as the immune system, whereas the long-term effect of ultraviolet on hair has not been investigated. we performed our experiment to find out the changes induced in hair follicle and shaft in those patients exposed to high doses of ultraviolet (A and B) during treatment of other skin conditions. Light and transmission electron microscopy examination of scalp hair follicles and shafts of 10 patients with vitiligo under psoralen plus ultraviolet A (group 1) and 10 patients with vitiligo under narrow band ultraviolet B (group 2) was carried out and compared with those of 10 healthy volunteers (group 3). Physical changes in the appearance of hair were more in groups 1 and 2 than control. Reduced hair follicle thickness and perifollicular infiltrate and hyaline disorganized perifollicular collagen were observed more in group 1 than in group 2 with the absence of these changes in group 3. Transmission electron microscopy showed nonspecific cell injury in hair follicles in group 1 more than the other 2 groups, while the damaging effect on hair was more in the second group than the others. Due to the damaging effect of ultraviolet on hair, patients under treatment with this modality should be cautious to protect their hair during treatment. © 2013 Wiley Periodicals, Inc.

Self-focusing and defocusing of Gaussian laser beams in collisional inhomogeneous plasmas with linear density and temperature ramps

NASA Astrophysics Data System (ADS)

Hashemzadeh, M.

2018-01-01

Self-focusing and defocusing of Gaussian laser beams in collisional inhomogeneous plasmas are investigated in the presence of various laser intensities and linear density and temperature ramps. Considering the ponderomotive force and using the momentum transfer and energy equations, the nonlinear electron density is derived. Taking into account the paraxial approximation and nonlinear electron density, a nonlinear differential equation, governing the focusing and defocusing of the laser beam, is obtained. Results show that in the absence of ramps the laser beam is focused between a minimum and a maximum value of laser intensity. For a certain value of laser intensity and initial electron density, the self-focusing process occurs in a temperature range which reaches its maximum at turning point temperature. However, the laser beam is converged in a narrow range for various amounts of initial electron density. It is indicated that the σ2 parameter and its sign can affect the self-focusing process for different values of laser intensity, initial temperature, and initial density. Finally, it is found that although the electron density ramp-down diverges the laser beam, electron density ramp-up improves the self-focusing process.

A qualitative study examining the influences on situation awareness and the identification, mitigation and escalation of recognised patient risk.

PubMed

Brady, Patrick W; Goldenhar, Linda M

2014-02-01

Situation awareness (SA)-the perception of data elements, comprehension of their meaning and projection of their status in the near future-has been associated with human performance in high-risk environments, including aviation and the operating room. The influences on SA in inpatient medicine are unknown. We conducted seven focus groups with nurses, respiratory therapists and resident physicians using a standardised semistructured focus group guide to promote discussion. Recordings of the focus groups were transcribed verbatim, and transcripts were qualitatively analysed by two independent reviewers to identify convergent and divergent themes. Three themes emerged: (1) team-based care, (2) availability of standardised data and (3) standardised processes and procedures. We categorised these into social, technological and organisational influences on SA. Subthemes that emerged from each focus group were shared language to describe at-risk patients, provider experience in critical care/deterioration and interdisciplinary huddles to identify and plan for at-risk patients. An objective early warning score, proactive assessment and planning, adequate clinician staffing and tools for entering, displaying and monitoring data trends were identified by six of seven groups. Our data better reflected the concepts of team SA and shared SA than individual SA. Team-based care and standardisation support SA and the identification and treatment of patient risk in the complex environment of inpatient care. These findings can be used to guide the development and implementation of targeted interventions such as huddles to proactively scan for risk and electronic health record displays of data trends.

On the Asymmetric Focusing of Low-Emittance Electron Bunches via Active Lensing by Using Capillary Discharges

NASA Astrophysics Data System (ADS)

Bulanov, Stepan; Bagdasarov, Gennadiy; Bobrova, Nadezhda; Boldarev, Alexey; Olkhovskaya, Olga; Sasorov, Pavel; Gasilov, Vladimir; Barber, Samuel; Gonsalves, Anthony; Schroeder, Carl; van Tilborg, Jeroen; Esarey, Eric; Leemans, Wim; Levato, Tadzio; Margarone, Daniele; Korn, Georg; Kando, Masaki; Bulanov, Sergei

2017-10-01

A novel method for asymmetric focusing of electron beams is proposed. The scheme is based on the active lensing technique, which takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside a capillary discharge are described theoretically and modeled with dissipative MHD simulations to enable analysis of capillaries of oblong rectangle cross-sections implying that large aspect ratio rectangular capillaries can be used to form flat electron bunches. The effect of the capillary cross-section on the electron beam focusing properties were studied using the analytical methods and simulation- derived magnetic field map showing the range of the capillary discharge parameters required for producing the high quality flat electron beams.

Three-Dimensional Analysis of Peeled Internal Limiting Membrane Using Focused Ion Beam/Scanning Electron Microscopy

PubMed Central

Murata, Kazuhisa; Hayashi, Ken; Nakamura, Kei-ichiro

2018-01-01

Purpose To reevaluate the effect of internal limiting membrane peeling during vitrectomy on the Müller cell damage, we examined the ultrastructure of the internal limiting membrane by using focused ion beam/scanning electron microscopy (FIB/SEM). Methods A total of 12 internal limiting membranes obtained during surgery in both the macular hole and the idiopathic epiretinal membrane groups were processed for observation by FIB/SEM. Three-dimensional structures of the internal limiting membrane were analyzed. Results The number of cell fragments in the macular hole group was 5.07 ± 1.03 per unit area of internal limiting membrane (100 μm2). The total volume of cell fragments was 3.54 ± 1.24 μm3/100 μm2. In contrast, the number of cell fragments in the epiretinal membrane group was 12.85 ± 3.45/100 μm2, and the total volume of cell fragments was 10.45 ± 2.77 μm3/100 μm2. Data for both values were significantly higher than those observed in the macular hole group (P = 0.0024 and P = 0.0022, respectively, Mann-Whitney U test). No statistical difference was found for the mean volume of the cell fragment between the two groups. Conclusions All of the internal limiting membrane examined in this study showed cell fragments on the retinal surface of the internal limiting membrane. As compared with macular hole, epiretinal membrane exhibited a higher number and total volume of cell fragments, indicating that internal limiting membrane peeling for epiretinal membrane might have a higher risk of causing inner retinal damage. Translational Relevance FIB/SEM was a useful tool for three-dimensional quantitative analysis of the internal limiting membrane. PMID:29423341

Advance of Mechanically Controllable Break Junction for Molecular Electronics.

PubMed

Wang, Lu; Wang, Ling; Zhang, Lei; Xiang, Dong

2017-06-01

Molecular electronics stands for the ultimate size of functional elements, keeping up with an unstoppable trend over the past few decades. As a vital component of molecular electronics, single molecular junctions have attracted significant attention from research groups all over the world. Due to its pronounced superiority, the mechanically controllable break junctions (MCBJ) technique has been widely applied to characterize the dynamic performance of single molecular junctions. This review presents a system analysis for single-molecule junctions and offers an overview of four test-beds for single-molecule junctions, thus offering more insight into the mechanisms of electron transport. We mainly focus on the development of state-of-the-art mechanically controlled break junctions. The three-terminal gated MCBJ approaches are introduced to manipulate the electron transport of molecules, and MCBJs are combined with characterization techniques. Additionally, applications of MCBJs and remarkable properties of single molecules are addressed. Finally, the challenges and perspective for the mechanically controllable break junctions technique are provided.

Geometries and focal properties of two electron-lens systems useful in low-energy electron or ion scattering

NASA Technical Reports Server (NTRS)

Chutjian, A.

1979-01-01

Geometries and focal properties are given for two types of electron-lens system commonly needed in electron scattering. One is an electron gun that focuses electrons from a thermionic emitter onto a fixed point (target) over a wide range of final energies. The other is an electron analyzer system that focuses scattered electrons of variable energy onto a fixed position (e.g., the entrance plane of an analyzer) at fixed energy with a zero final beam angle. Analyzer-system focusing properties are given for superelastically, elastically, and inelastically scattered electrons. Computer calculations incorporating recent accurate tube-lens focal properties are used to compute lens voltages, locations and diameters of all pupils and windows, filling factors, and asymptotic rays throughout each lens system. Focus voltages as a function of electron energy and energy change are given, and limits of operation of each system discussed. Both lens systems have been in routine use for several years, and good agreement has been consistently found between calculated and operating lens voltages.

"It's not smoke. It's not tar. It's not 4000 chemicals. Case closed": Exploring attitudes, beliefs, and perceived social norms of e-cigarette use among adult users.

PubMed

Coleman, Blair N; Johnson, Sarah E; Tessman, Greta K; Tworek, Cindy; Alexander, Jennifer; Dickinson, Denise M; Rath, Jessica; Green, Kerry M

2016-02-01

Electronic cigarette (e-cigarette) use is rapidly increasing among adults in the U.S. The purpose of this qualitative study was to explore consumer perceptions about e-cigarettes, including knowledge, attitudes, beliefs and perceived social norms. A total of 14 focus groups (N=116) were conducted with current adult e-cigarette users in five U.S. cities from March through May, 2014. Focus groups were segmented by age (young adults aged 18-29 and older adults aged 30 and older) as well as by e-cigarette use status (exclusive e-cigarette users and non-exclusive e-cigarette users). Focus group discussions lasted approximately 60-min and were audio-recorded and transcribed; data were analyzed using a phenomenological approach. Participants expressed many positive attitudes towards e-cigarettes and simultaneously reported a lack of information and knowledge about the products. Focus group participants overwhelmingly felt as though the ingredients of e-cigarettes were likely less harmful than conventional cigarettes. Additionally, many described positive reactions from family and friends, especially when e-cigarettes were used in place of conventional cigarettes. Findings from this qualitative study provide insight into consumer knowledge, attitudes and beliefs about e-cigarettes increasing our understanding of why and how they are being used. Such information will help provide insight into the potential public health impact of these emerging products. Published by Elsevier Ireland Ltd.

Implementation and Impact of an Automated Group Monitoring and Feedback System to Promote Hand Hygiene Among Health Care Personnel

PubMed Central

Conway, Laurie J.; Riley, Linda; Saiman, Lisa; Cohen, Bevin; Alper, Paul; Larson, Elaine L.

2015-01-01

Article-at-a-Glance Background Despite substantial evidence to support the effectiveness of hand hygiene for preventing health care–associated infections, hand hygiene practice is often inadequate. Hand hygiene product dispensers that can electronically capture hand hygiene events have the potential to improve hand hygiene performance. A study on an automated group monitoring and feedback system was implemented from January 2012 through March 2013 at a 140-bed community hospital. Methods An electronic system that monitors the use of sanitizer and soap but does not identify individual health care personnel was used to calculate hand hygiene events per patient-hour for each of eight inpatient units and hand hygiene events per patient-visit for the six outpatient units. Hand hygiene was monitored but feedback was not provided during a six-month baseline period and three-month rollout period. During the rollout, focus groups were conducted to determine preferences for feedback frequency and format. During the six-month intervention period, graphical reports were e-mailed monthly to all managers and administrators, and focus groups were repeated. Results After the feedback began, hand hygiene increased on average by 0.17 events/patient-hour in inpatient units (interquartile range = 0.14, p = .008). In outpatient units, hand hygiene performance did not change significantly. A variety of challenges were encountered, including obtaining accurate census and staffing data, engendering confidence in the system, disseminating information in the reports, and using the data to drive improvement. Conclusions Feedback via an automated system was associated with improved hand hygiene performance in the short term. PMID:25252389

Implementation and impact of an automated group monitoring and feedback system to promote hand hygiene among health care personnel.

PubMed

Conway, Laurie J; Riley, Linda; Saiman, Lisa; Cohen, Bevin; Alper, Paul; Larson, Elaine L

2014-09-01

Despite substantial evidence to support the effectiveness of hand hygiene for preventing health care-associated infections, hand hygiene practice is often inadequate. Hand hygiene product dispensers that can electronically capture hand hygiene events have the potential to improve hand hygiene performance. A study on an automated group monitoring and feedback system was implemented from January 2012 through March 2013 at a 140-bed community hospital. An electronic system that monitors the use of sanitizer and soap but does not identify individual health care personnel was used to calculate hand hygiene events per patient-hour for each of eight inpatient units and hand hygiene events per patient-visit for the six outpatient units. Hand hygiene was monitored but feedback was not provided during a six-month baseline period and three-month rollout period. During the rollout, focus groups were conducted to determine preferences for feedback frequency and format. During the six-month intervention period, graphical reports were e-mailed monthly to all managers and administrators, and focus groups were repeated. After the feedback began, hand hygiene increased on average by 0.17 events/patient-hour in inpatient units (interquartile range = 0.14, p = .008). In outpatient units, hand hygiene performance did not change significantly. A variety of challenges were encountered, including obtaining accurate census and staffing data, engendering confidence in the system, disseminating information in the reports, and using the data to drive improvement. Feedback via an automated system was associated with improved hand hygiene performance in the short-term.

High power linear pulsed beam annealer. [Patent application

DOEpatents

Strathman, M.D.; Sadana, D.K.; True, R.B.

1980-11-26

A high power pulsed electron beam system for annealing semiconductors is comprised of an electron gun having a heated cathode, control grid and focus ring for confining the pulsed beam of electrons to a predetermined area, and a curved drift tube. The drift tube and an annular Faraday shield between the focus ring and the drift tube are maintained at a high positive voltage with respect to the cathode to accelerate electrons passing through the focus ring, thereby eliminating space charge limitations on the emission of electrons from said gun. A coil surrounding the curved drift tube provides a magnetic field which maintains the electron beam focused about the axis of the tube. The magnetic field produced by the coil around the curved tube imparts motion to electrons in a spiral path for shallow penetration of the electrons into a target. It also produces a scalloped profile of the electron beam. A second drift tube spaced a predetermined distance from the curved tube is positioned with its axis aligned with the axis of the first drift tube. The second drift tube and the target holder are maintained at a reference voltage between the cathode voltage and the curved tube voltage to decelerate the electrons. A second coil surrounding the second drift tube, maintains the electron beam focused about the axis of the second drift tube. The magnetic field of the second coil comprises the electron beam to the area of the semiconductor on the target holder.

Experiments on Quantum Hall Topological Phases in Ultra Low Temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Du, Rui-Rui

2015-02-14

This project is to cool electrons in semiconductors to extremely low temperatures and to study new states of matter formed by low-dimensional electrons (or holes). At such low temperatures (and with an intense magnetic field), electronic behavior differs completely from ordinary ones observed at room temperatures or regular low temperature. Studies of electrons at such low temperatures would open the door for fundamental discoveries in condensed matter physics. Present studies have been focused on topological phases in the fractional quantum Hall effect in GaAs/AlGaAs semiconductor heterostructures, and the newly discovered (by this group) quantum spin Hall effect in InAs/GaSb materials.more » This project consists of the following components: 1) Development of efficient sample cooling techniques and electron thermometry: Our goal is to reach 1 mK electron temperature and reasonable determination of electron temperature; 2) Experiments at ultra-low temperatures: Our goal is to understand the energy scale of competing quantum phases, by measuring the temperature-dependence of transport features. Focus will be placed on such issues as the energy gap of the 5/2 state, and those of 12/5 (and possible 13/5); resistive signature of instability near 1/2 at ultra-low temperatures; 3) Measurement of the 5/2 gaps in the limit of small or large Zeeman energies: Our goal is to gain physics insight of 5/2 state at limiting experimental parameters, especially those properties concerning the spin polarization; 4) Experiments on tuning the electron-electron interaction in a screened quantum Hall system: Our goal is to gain understanding of the formation of paired fractional quantum Hall state as the interaction pseudo-potential is being modified by a nearby screening electron layer; 5) Experiments on the quantized helical edge states under a strong magnetic field and ultralow temperatures: our goal is to investigate both the bulk and edge states in a quantum spin Hall insulator under time-reversal symmetry-broken conditions.« less

Facilitating Ambulatory Electronic Health Record System Implementation: Evidence from a Qualitative Study

PubMed Central

Hefner, Jennifer; Robbins, Julie; Huerta, Timothy R.

2013-01-01

Background. Ambulatory care practices have increasing interest in leveraging the capabilities of electronic health record (EHR) systems, but little information is available documenting how organizations have successfully implemented these systems. Objective. To characterize elements of successful electronic health record (EHR) system implementation and to synthesize the key informants' perspectives about successful implementation practices. Methods. Key informant interviews and focus groups were conducted with a purposive sample of individuals from US healthcare organizations identified for their success with ambulatory EHR implementation. Rigorous qualitative data analyses used both deductive and inductive methods. Results. Participants identified personal and system-related barriers, at both the individual and organization levels, including poor computer skills, productivity losses, resistance to change, and EHR system failure. Implementation success was reportedly facilitated by careful planning and consistent communication throughout distinct stages of the implementation process. A significant element of successful implementation was an emphasis on optimization, both during “go-live” and, subsequently, when users had more experience with the system. Conclusion. Successful EHR implementation requires both detailed planning and clear mechanisms to deal with unforeseen or unintended consequences. Focusing on user buy-in early and including plans for optimization can facilitate greater success. PMID:24228257

Three-Dimensional Electron Optics Model Developed for Traveling-Wave Tubes

NASA Technical Reports Server (NTRS)

Kory, Carol L.

2000-01-01

A three-dimensional traveling-wave tube (TWT) electron beam optics model including periodic permanent magnet (PPM) focusing has been developed at the NASA Glenn Research Center at Lewis Field. This accurate model allows a TWT designer to develop a focusing structure while reducing the expensive and time-consuming task of building the TWT and hot-testing it (with the electron beam). In addition, the model allows, for the first time, an investigation of the effect on TWT operation of the important azimuthally asymmetric features of the focusing stack. The TWT is a vacuum device that amplifies signals by transferring energy from an electron beam to a radiofrequency (RF) signal. A critically important component is the focusing structure, which keeps the electron beam from diverging and intercepting the RF slow wave circuit. Such an interception can result in excessive circuit heating and decreased efficiency, whereas excessive growth in the beam diameter can lead to backward wave oscillations and premature saturation, indicating a serious reduction in tube performance. The most commonly used focusing structure is the PPM stack, which consists of a sequence of cylindrical iron pole pieces and opposite-polarity magnets. Typically, two-dimensional electron optics codes are used in the design of magnetic focusing devices. In general, these codes track the beam from the gun downstream by solving equations of motion for the electron beam in static-electric and magnetic fields in an azimuthally symmetric structure. Because these two-dimensional codes cannot adequately simulate a number of important effects, the simulation code MAFIA (solution of Maxwell's equations by the Finite-Integration-Algorithm) was used at Glenn to develop a three-dimensional electron optics model. First, a PPM stack was modeled in three dimensions. Then, the fields obtained using the magnetostatic solver were loaded into a particle-in-cell solver where the fully three-dimensional behavior of the beam was simulated in the magnetic focusing field. For the first time, the effects of azimuthally asymmetric designs and critical azimuthally asymmetric characteristics of the focusing stack (such as shunts, C-magnets, or magnet misalignment) on electron beam behavior have been investigated. A cutaway portion of a simulated electron beam focused by a PPM stack is illustrated.

Are You Listening to Me? Space, Context and Perspective in the Regulation of Mp3 Players and Cell Phones in Secondary School

ERIC Educational Resources Information Center

Domitrek, Julie; Raby, Rebecca

2008-01-01

Recently, there has been much media coverage about cell phone and personal music player usage in schools, including in the Toronto and Whitton regions. However, there is little literature on how students and teachers view rules on the use of such electronic devices. Using data gathered from focus groups with students in Toronto and Whitton and…

EBT Payment for Online Grocery Orders: a Mixed-Methods Study to Understand Its Uptake among SNAP Recipients and the Barriers to and Motivators for Its Use.

PubMed

Martinez, Olivia; Tagliaferro, Barbara; Rodriguez, Noemi; Athens, Jessica; Abrams, Courtney; Elbel, Brian

2018-04-01

To examine Supplemental Nutrition Assistance Program (SNAP) recipients' use of the first online supermarket accepting Electronic Benefit Transfer (EBT) payment. In this mixed-methods study, the authors collected EBT purchase data from an online grocer and attempted a randomized controlled trial in the South Bronx, New York City, followed by focus groups with SNAP beneficiaries aged ≥18 years. Participants were randomized to shop at their usual grocery store or an online supermarket for 3 months. Focus groups explored barriers and motivators to online EBT redemption. Few participants made online purchases, even when incentivized in the randomized controlled trial. Qualitative findings highlighted a lack of perceived control over the online food selection process as a key barrier to purchasing food online. Motivators included fast, free shipping and discounts. Electronic Benefit Transfer for online grocery purchases has the potential to increase food access among SNAP beneficiaries, but challenges exist to this new food buying option. Understanding online food shopping barriers and motivators is critical to the success of policies targeting the online expansion of SNAP benefits. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Electron beam deflection, focusing, and collimation by a femtosecond laser lens

NASA Astrophysics Data System (ADS)

Minogin, V. G.

2009-11-01

This work examines spatial separation of femtosecond electron bunches using the ponderomotive potential created by femtosecond laser pulses. It is shown that ponderomotive optical potentials are capable of effectively deflecting, focusing, and collimating narrow femtosecond electron bunches.

‘Maybe they should regulate them quite strictly until they know the true dangers’: a focus group study exploring UK adolescents’ views on e‐cigarette regulation

PubMed Central

Trevisan, Filippo; Hilton, Shona

2016-01-01

Abstract Background and aims Regulation of electronic cigarettes has moved to the top of the addiction policy agenda, as demonstrated by the recent focus across the United Kingdom on introducing age‐of‐sale restrictions. However, the views of those affected by such regulation remain largely unexplored. This paper presents the first detailed qualitative exploration of adolescents’ perceptions of existing, and opinions about potential e‐cigarette regulation. Methods Sixteen focus groups, including a total of 83 teenagers between the ages of 14 and 17 years, were conducted in deprived, mixed and affluent urban areas in Scotland and England between November 2014 and February 2015. Transcripts were imported into Nivivo 10, coded thematically and analysed. Results Participants critically considered existing evidence and competing interests in regulatory debates and demonstrated sophisticated understanding of the advantages and disadvantages of regulation. They overwhelmingly supported strong e‐cigarette regulation and endorsed restrictions on sales to minors, marketing and e‐cigarette use in public places. Concern about potential health harms of e‐cigarette use and marketing increasing the acceptability of vaping and smoking led these adolescents to support regulation. Conclusions In focus group discussions, a sample of UK adolescents exposed to particular communications about e‐cigarettes supported strict regulation of e‐cigarettes, including banning sales to minors and use in indoor public areas. PMID:26948979

Development of a prototype clinical decision support tool for osteoporosis disease management: a qualitative study of focus groups.

PubMed

Kastner, Monika; Li, Jamy; Lottridge, Danielle; Marquez, Christine; Newton, David; Straus, Sharon E

2010-07-22

Osteoporosis affects over 200 million people worldwide, and represents a significant cost burden. Although guidelines are available for best practice in osteoporosis, evidence indicates that patients are not receiving appropriate diagnostic testing or treatment according to guidelines. The use of clinical decision support systems (CDSSs) may be one solution because they can facilitate knowledge translation by providing high-quality evidence at the point of care. Findings from a systematic review of osteoporosis interventions and consultation with clinical and human factors engineering experts were used to develop a conceptual model of an osteoporosis tool. We conducted a qualitative study of focus groups to better understand physicians' perceptions of CDSSs and to transform the conceptual osteoporosis tool into a functional prototype that can support clinical decision making in osteoporosis disease management at the point of care. The conceptual design of the osteoporosis tool was tested in 4 progressive focus groups with family physicians and general internists. An iterative strategy was used to qualitatively explore the experiences of physicians with CDSSs; and to find out what features, functions, and evidence should be included in a working prototype. Focus groups were conducted using a semi-structured interview guide using an iterative process where results of the first focus group informed changes to the questions for subsequent focus groups and to the conceptual tool design. Transcripts were transcribed verbatim and analyzed using grounded theory methodology. Of the 3 broad categories of themes that were identified, major barriers related to the accuracy and feasibility of extracting bone mineral density test results and medications from the risk assessment questionnaire; using an electronic input device such as a Tablet PC in the waiting room; and the importance of including well-balanced information in the patient education component of the osteoporosis tool. Suggestions for modifying the tool included the addition of a percentile graph showing patients' 10-year risk for osteoporosis or fractures, and ensuring that the tool takes no more than 5 minutes to complete. Focus group data revealed the facilitators and barriers to using the osteoporosis tool at the point of care so that it can be optimized to aid physicians in their clinical decision making.

Development of a prototype clinical decision support tool for osteoporosis disease management: a qualitative study of focus groups

PubMed Central

2010-01-01

Background Osteoporosis affects over 200 million people worldwide, and represents a significant cost burden. Although guidelines are available for best practice in osteoporosis, evidence indicates that patients are not receiving appropriate diagnostic testing or treatment according to guidelines. The use of clinical decision support systems (CDSSs) may be one solution because they can facilitate knowledge translation by providing high-quality evidence at the point of care. Findings from a systematic review of osteoporosis interventions and consultation with clinical and human factors engineering experts were used to develop a conceptual model of an osteoporosis tool. We conducted a qualitative study of focus groups to better understand physicians' perceptions of CDSSs and to transform the conceptual osteoporosis tool into a functional prototype that can support clinical decision making in osteoporosis disease management at the point of care. Methods The conceptual design of the osteoporosis tool was tested in 4 progressive focus groups with family physicians and general internists. An iterative strategy was used to qualitatively explore the experiences of physicians with CDSSs; and to find out what features, functions, and evidence should be included in a working prototype. Focus groups were conducted using a semi-structured interview guide using an iterative process where results of the first focus group informed changes to the questions for subsequent focus groups and to the conceptual tool design. Transcripts were transcribed verbatim and analyzed using grounded theory methodology. Results Of the 3 broad categories of themes that were identified, major barriers related to the accuracy and feasibility of extracting bone mineral density test results and medications from the risk assessment questionnaire; using an electronic input device such as a Tablet PC in the waiting room; and the importance of including well-balanced information in the patient education component of the osteoporosis tool. Suggestions for modifying the tool included the addition of a percentile graph showing patients' 10-year risk for osteoporosis or fractures, and ensuring that the tool takes no more than 5 minutes to complete. Conclusions Focus group data revealed the facilitators and barriers to using the osteoporosis tool at the point of care so that it can be optimized to aid physicians in their clinical decision making. PMID:20650007

Chemical modification of group IV graphene analogs

PubMed Central

Nakano, Hideyuki; Tetsuka, Hiroyuki; Spencer, Michelle J. S.; Morishita, Tetsuya

2018-01-01

Abstract Mono-elemental two-dimensional (2D) crystals (graphene, silicene, germanene, stanene, and so on), termed 2D-Xenes, have been brought to the forefront of scientific research. The stability and electronic properties of 2D-Xenes are main challenges in developing practical devices. Therefore, in this review, we focus on 2D free-standing group-IV graphene analogs (graphene quantum dots, silicane, and germanane) and the functionalization of these sheets with organic moieties, which could be handled under ambient conditions. We highlight the present results and future opportunities, functions and applications, and novel device concepts. PMID:29410713

Secondary electron emission from plasma processed accelerating cavity grade niobium

NASA Astrophysics Data System (ADS)

Basovic, Milos

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier. Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for higher energy upgrades of existing accelerators and more compact designs of new accelerators. Each new and improved technology was faced with ever emerging limiting factors. With the standard high accelerating gradients of more than 25 MV/m, free electrons inside the cavities get accelerated by the field, gaining enough energy to produce more electrons in their interactions with the walls of the cavity. The electron production is exponential and the electron energy transfer to the walls of a cavity can trigger detrimental processes, limiting the performance of the cavity. The root cause of the free electron number gain is a phenomenon called Secondary Electron Emission (SEE). Even though the phenomenon has been known and studied over a century, there are still no effective means of controlling it. The ratio between the electrons emitted from the surface and the impacting electrons is defined as the Secondary Electron Yield (SEY). A SEY ratio larger than 1 designates an increase in the total number of electrons. In the design of accelerator cavities, the goal is to reduce the SEY to be as low as possible using any form of surface manipulation. In this dissertation, an experimental setup was developed and used to study the SEY of various sample surfaces that were treated by different techniques. Specifically, this work provides the results of SEY from the plasma cleaned cavity grade niobium (Nb) samples. Pure niobium is currently the material of choice for the fabrication of Superconducting Radio Frequency (SRF) cavities. The effect of plasma processing with two different gases will be examined in two groups of samples. The first group of samples is made from cavity grade niobium. The second group of samples is made from the same material, but include a welded joint made by electron beam welding, since in niobium SRF cavities the peak electric and magnetic field are seen in close proximity to the welded joints. Both groups of samples will be exposed to nitrogen (N2) and a mixture of argon with oxygen (Ar/O2) plasma. It is the goal of this research to determine the SEY on these two groups of samples before and after plasma processing as a function of the energy of primary electrons. The SEY as a function of the angle of incidence of the primary electrons is tested on the samples treated with Ar/O2 plasma.

Toward Proper Authentication Methods in Electronic Medical Record Access Compliant to HIPAA and C.I.A. Triangle.

PubMed

Tipton, Stephen J; Forkey, Sara; Choi, Young B

2016-04-01

This paper examines various methods encompassing the authentication of users in accessing Electronic Medical Records (EMRs). From a methodological perspective, multiple authentication methods have been researched from both a desktop and mobile accessibility perspective. Each method is investigated at a high level, along with comparative analyses, as well as real world examples. The projected outcome of this examination is a better understanding of the sophistication required in protecting the vital privacy constraints of an individual's Protected Health Information (PHI). In understanding the implications of protecting healthcare data in today's technological world, the scope of this paper is to grasp an overview of confidentiality as it pertains to information security. In addressing this topic, a high level overview of the three goals of information security are examined; in particular, the goal of confidentiality is the primary focus. Expanding upon the goal of confidentiality, healthcare accessibility legal aspects are considered, with a focus upon the Health Insurance Portability and Accountability Act of 1996 (HIPAA). With the primary focus of this examination being access to EMRs, the paper will consider two types of accessibility of concern: access from a physician, or group of physicians; and access from an individual patient.

Behavioral interventions as a treatment for epilepsy: A multicenter randomized controlled trial.

PubMed

Haut, Sheryl R; Lipton, Richard B; Cornes, Susannah; Dwivedi, Alok K; Wasson, Rachel; Cotton, Sian; Strawn, Jeffrey R; Privitera, Michael

2018-03-13

To evaluate the effect of a stress-reduction intervention in participants with medication-resistant epilepsy. Adults with medication-resistant focal epilepsy (n = 66) were recruited from 3 centers and randomized to 1 of 2 interventions: (1) progressive muscle relaxation (PMR) with diaphragmatic breathing, or (2) control focused-attention activity with extremity movements. Following an 8-week baseline period, participants began 12 weeks of double-blind treatment. Daily self-reported mood and stress ratings plus seizure counts were completed by participants using an electronic diary, and no medication adjustments were permitted. The primary outcome was percent reduction in seizure frequency per 28 days comparing baseline and treatment; secondary outcomes included stress reduction and stress-seizure interaction. In the 66 participants in the intention-to-treat analysis, seizure frequency was reduced from baseline in both treatment groups (PMR: 29%, p < 0.05; focused attention: 25%, p < 0.05). PMR and focused attention did not differ in seizure reduction ( p = 0.38), although PMR was associated with stress reduction relative to focused attention ( p < 0.05). Daily stress was not a predictor of seizures. Both PMR and the focused-attention groups showed reduced seizure frequency compared to baseline in participants with medication-resistant focal seizures, although the 2 treatments did not differ. PMR was more effective than focused attention in reducing self-reported stress. NCT01444183. © 2018 American Academy of Neurology.

Focusing Electron Beams at SLAC.

ERIC Educational Resources Information Center

Taylor, Richard L.

1993-01-01

Describes the development of a set of magnets that focus high-energy electron and positron beams causing them to collide, annihilate each other, and generate new particles. Explains how dipoles bend the beam, how quadrupoles focus the beam, how the focal length is calculated, and the superconducting final focus. (MDH)

Challenging Density Functional Theory Calculations with Hemes and Porphyrins

PubMed Central

de Visser, Sam P.; Stillman, Martin J.

2016-01-01

In this paper we review recent advances in computational chemistry and specifically focus on the chemical description of heme proteins and synthetic porphyrins that act as both mimics of natural processes and technological uses. These are challenging biochemical systems involved in electron transfer as well as biocatalysis processes. In recent years computational tools have improved considerably and now can reproduce experimental spectroscopic and reactivity studies within a reasonable error margin (several kcal·mol−1). This paper gives recent examples from our groups, where we investigated heme and synthetic metal-porphyrin systems. The four case studies highlight how computational modelling can correctly reproduce experimental product distributions, predicted reactivity trends and guide interpretation of electronic structures of complex systems. The case studies focus on the calculations of a variety of spectroscopic features of porphyrins and show how computational modelling gives important insight that explains the experimental spectra and can lead to the design of porphyrins with tuned properties. PMID:27070578

Investigation of Ion Beam Production and Acceleration Using Linear Electron Beams and a Pulse Powered Plasma Focus.

DTIC Science & Technology

1984-03-01

POWERED PLASMA FOCUS Contract No. AFOSR-83-0145 PROGRESS REPORT For the Period April 1, 1983 through March 31, 1984 Submitted to Air Force Office of...AND ACCELERATION USING LINEAR ELECTRON BEAMS AND A PULSE POWERED PLASMA FOCUS Contract No. AFOSR-83-0145 PROGRESS REPORT For the Period April 1, 1983...Acceleration Using Linear Electron Beams and a Pulse Powered Plasma Focus " 01 €,G APRIL 1, 1983 THROUGH MRCH 31, 1984 A. Collective Acceleration and Related

An Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic

NASA Astrophysics Data System (ADS)

Bakeman, Michael S.

Currently particle accelerators such as the Large Hadron Collider use RF cavities with a maximum field gradient of 50-100 MV/m to accelerate particles over long distances. A new type of plasma based accelerator called a Laser Plasma Accelerator (LPA) is being investigated at the LOASIS group at Lawrence Berkeley National Laboratory which can sustain field gradients of 10-100 GV/m. This new type of accelerator offers the potential to create compact high energy accelerators and light sources. In order to investigate the feasibility of producing a compact light source an undulator-based electron beam diagnostic for use on the LOASIS LPA has been built and calibrated. This diagnostic relies on the principal that the spectral analysis of synchrotron radiation from an undulator can reveal properties of the electron beam such as emittance, energy and energy spread. The effects of electron beam energy spread upon the harmonics of undulator produced synchrotron radiation were derived from the equations of motion of the beam and numerically simulated. The diagnostic consists of quadrupole focusing magnets to collimate the electron beam, a 1.5 m long undulator to produce the synchrotron radiation, and a high resolution high gain XUV spectrometer to analyze the radiation. The undulator was aligned and tuned in order to maximize the flux of synchrotron radiation produced. The spectrometer was calibrated at the Advanced Light Source, with the results showing the ability to measure electron beam energy spreads at resolutions as low as 0.1% rms, a major improvement over conventional magnetic spectrometers. Numerical simulations show the ability to measure energy spreads on realistic LPA produced electron beams as well as the improvements in measurements made with the quadrupole magnets. Experimentally the quadrupoles were shown to stabilize and focus the electron beams at specific energies for their insertion into the undulator, with the eventual hope of producing an all optical Free Electron Laser operating in the XUV and soft x-ray regimes.

Predictive design and interpretation of colliding pulse injected laser wakefield experiments

NASA Astrophysics Data System (ADS)

Cormier-Michel, Estelle; Ranjbar, Vahid H.; Cowan, Ben M.; Bruhwiler, David L.; Geddes, Cameron G. R.; Chen, Min; Ribera, Benjamin; Esarey, Eric; Schroeder, Carl B.; Leemans, Wim P.

2010-11-01

The use of colliding laser pulses to control the injection of plasma electrons into the plasma wake of a laser plasma accelerator is a promising approach to obtaining stable, tunable electron bunches with reduced emittance and energy spread. Colliding Pulse Injection (CPI) experiments are being performed by groups around the world. We will present recent particle-in-cell simulations, using the parallel VORPAL framework, of CPI for physical parameters relevant to ongoing experiments of the LOASIS program at LBNL. We evaluate the effect of laser and plasma tuning, on the trapped electron bunch and perform parameter scans in order to optimize the quality of the bunch. Impact of non-ideal effects such as imperfect laser modes and laser self focusing are also evaluated. Simulation data are validated against current experimental results, and are used to design future experiments.

Electronic structure of uracil-like nucleobases adsorbed on Si(001): uracil, thymine and 5-fluorouracil

NASA Astrophysics Data System (ADS)

Molteni, Elena; Onida, Giovanni; Cappellini, Giancarlo

2016-04-01

We study the electronic properties of the Si(001):Uracil, Si(001):Thymine, and Si(001):5-Fluorouracil systems, focusing on the Si dimer-bridging configuration with adsorption governed by carbonyl groups. While the overall structural and electronic properties are similar, with small differences due to chemical substitutions, much larger effects on the surface band dispersion and bandgap show up as a function of the molecular orientation with respect to the surface. An off-normal orientation of the molecular planes is favored, showing larger bandgap and lower total energy than the upright position. We also analyze the localization of gap-edge occupied and unoccupied surface states. Supplementary material in the form of one pdf file available from the Journal web page at http://dx.doi.org/10.1140/epjb/e2016-70011-1

Teacher quality: a comparison of National Board-certified and non-Board-certified teachers of deaf students.

PubMed

Scheetz, Nanci A; Martin, David S

2006-01-01

THE STUDY was designed to identify specific components of teacher excellence, focusing initially on the characteristics of the small number of teachers of the deaf who are certified by the National Board for Professional Teaching Standards (NBPTS), then comparing those with the characteristics of other teachers identified as master teachers by university faculty in teacher preparation in deafness. Classroom observation, written lesson plans, teacher questionnaires on beliefs, and content analysis of interactive electronic focus groups were used to compare the two groups of teachers. Results indicated similarities between Board-certified and non-Board-certified master teachers in regard to teacher behaviors and commitment to well-founded pedagogical principles. Differences were found in classroom priorities and in the greater level of interconnectivity expressed by Board-certified teachers as the result of becoming Board certified. Recommendations are made for preparing teachers of deaf students.

Method of automatic measurement and focus of an electron beam and apparatus therefore

DOEpatents

Giedt, W.H.; Campiotti, R.

1996-01-09

An electron beam focusing system, including a plural slit-type Faraday beam trap, for measuring the diameter of an electron beam and automatically focusing the beam for welding is disclosed. Beam size is determined from profiles of the current measured as the beam is swept over at least two narrow slits of the beam trap. An automated procedure changes the focus coil current until the focal point location is just below a workpiece surface. A parabolic equation is fitted to the calculated beam sizes from which optimal focus coil current and optimal beam diameter are determined. 12 figs.

Method of automatic measurement and focus of an electron beam and apparatus therefor

DOEpatents

Giedt, Warren H.; Campiotti, Richard

1996-01-01

An electron beam focusing system, including a plural slit-type Faraday beam trap, for measuring the diameter of an electron beam and automatically focusing the beam for welding. Beam size is determined from profiles of the current measured as the beam is swept over at least two narrow slits of the beam trap. An automated procedure changes the focus coil current until the focal point location is just below a workpiece surface. A parabolic equation is fitted to the calculated beam sizes from which optimal focus coil current and optimal beam diameter are determined.

High power linear pulsed beam annealer

DOEpatents

Strathman, Michael D.; Sadana, Devendra K.; True, Richard B.

1983-01-01

A high power pulsed electron beam is produced in a system comprised of an electron gun having a heated cathode, control grid, focus ring, and a curved drift tube. The drift tube is maintained at a high positive voltage with respect to the cathode to accelerate electrons passing through the focus ring and to thereby eliminate space charge. A coil surrounding the curved drift tube provides a magnetic field which maintains the electron beam focused about the axis of the tube and imparts motion on electrons in a spiral path for shallow penetration of the electrons into a target. The curvature of the tube is selected so there is no line of sight between the cathode and a target holder positioned within a second drift tube spaced coaxially from the curved tube. The second tube and the target holder are maintained at a reference voltage that decelerates the electrons. A second coil surrounding the second drift tube maintains the electron beam focused about the axis of the second drift tube and compresses the electron beam to the area of the target. The target holder can be adjusted to position the target where the cross section of the beam matches the area of the target.

Building and testing a patient-centric electronic bedside communication center.

PubMed

Dykes, Patricia C; Carroll, Diane L; Hurley, Ann C; Benoit, Angela; Chang, Frank; Pozzar, Rachel; Caligtan, Christine A

2013-01-01

In this article, the authors describe the development and pilot testing of an electronic bedside communication center (eBCC) prototype to improve access to health information for hospitalized adults and their family caregivers. Focus groups were used to identify improvements for the initial eBCC prototype developed by the research team. Face-to-face bedside interviews and questions were presented while patients used the eBCC for usability testing to drive further development. Qualitative methods within an iterative, participatory approach supported the development of an eBCC prototype that was considered both easy to use and helpful for accessing tailored patient information during an inpatient hospitalization to receive acute care. Copyright 2013, SLACK Incorporated.

Cytochrome bc1 complexes of microorganisms.

PubMed Central

Trumpower, B L

1990-01-01

The cytochrome bc1 complex is the most widely occurring electron transfer complex capable of energy transduction. Cytochrome bc1 complexes are found in the plasma membranes of phylogenetically diverse photosynthetic and respiring bacteria, and in the inner mitochondrial membrane of all eucaryotic cells. In all of these species the bc1 complex transfers electrons from a low-potential quinol to a higher-potential c-type cytochrome and links this electron transfer to proton translocation. Most bacteria also possess alternative pathways of quinol oxidation capable of circumventing the bc1 complex, but these pathways generally lack the energy-transducing, protontranslocating activity of the bc1 complex. All cytochrome bc1 complexes contain three electron transfer proteins which contain four redox prosthetic groups. These are cytochrome b, which contains two b heme groups that differ in their optical and thermodynamic properties; cytochrome c1, which contains a covalently bound c-type heme; and a 2Fe-2S iron-sulfur protein. The mechanism which links proton translocation to electron transfer through these proteins is the proton motive Q cycle, and this mechanism appears to be universal to all bc1 complexes. Experimentation is currently focused on understanding selected structure-function relationships prerequisite for these redox proteins to participate in the Q-cycle mechanism. The cytochrome bc1 complexes of mitochondria differ from those of bacteria, in that the former contain six to eight supernumerary polypeptides, in addition to the three redox proteins common to bacteria and mitochondria. These extra polypeptides are encoded in the nucleus and do not contain redox prosthetic groups. The functions of the supernumerary polypeptides of the mitochondrial bc1 complexes are generally not known and are being actively explored by genetically manipulating these proteins in Saccharomyces cerevisiae. Images PMID:2163487

The ethics of research using electronic mail discussion groups.

PubMed

Kralik, Debbie; Warren, Jim; Price, Kay; Koch, Tina; Pignone, Gino

2005-12-01

The aim of this paper is to identify and discuss the ethical considerations that have confronted and challenged the research team when researchers facilitate conversations using private electronic mail discussion lists. The use of electronic mail group conversations, as a collaborative data generation method, remains underdeveloped in nursing. Ethical challenges associated with this approach to data generation have only begun to be considered. As receipt of ethics approval for a study titled; 'Describing transition with people who live with chronic illness' we have been challenged by many ethical dilemmas, hence we believe it is timely to share the issues that have confronted the research team. These discussions are essential so we can understand the possibilities for research interaction, communication, and collaboration made possible by advanced information technologies. Our experiences in this study have increased our awareness for ongoing ethical discussions about privacy, confidentiality, consent, accountability and openness underpinning research with human participants when generating data using an electronic mail discussion group. We describe how we work at upholding these ethical principles focusing on informed consent, participant confidentiality and privacy, the participants as threats to themselves and one another, public-private confusion, employees with access, hackers and threats from the researchers. A variety of complex issues arise during cyberspace research that can make the application of traditional ethical standards troublesome. Communication in cyberspace alters the temporal, spatial and sensory components of human interaction, thereby challenging traditional ethical definitions and calling to question some basic assumptions about identity and ones right to keep aspects of it confidential. Nurse researchers are bound by human research ethics protocols; however, the nature of research by electronic mail generates moral issues as well as ethical concerns. Vigilance by researchers is required to ensure that data are viewed within the scope of the enabling ethics approval.

A Focus Group Exploration of Automated Case-Finders to Identify High-Risk Heart Failure Patients Within an Urban Safety Net Hospital.

PubMed

Patterson, Mark E; Miranda, Derick; Schuman, Greg; Eaton, Christopher; Smith, Andrew; Silver, Brad

2016-01-01

Leveraging "big data" as a means of informing cost-effective care holds potential in triaging high-risk heart failure (HF) patients for interventions within hospitals seeking to reduce 30-day readmissions. Explore provider's beliefs and perceptions about using an electronic health record (EHR)-based tool that uses unstructured clinical notes to risk-stratify high-risk heart failure patients. Six providers from an inpatient HF clinic within an urban safety net hospital were recruited to participate in a semistructured focus group. A facilitator led a discussion on the feasibility and value of using an EHR tool driven by unstructured clinical notes to help identify high-risk patients. Data collected from transcripts were analyzed using a thematic analysis that facilitated drawing conclusions clustered around categories and themes. From six categories emerged two themes: (1) challenges of finding valid and accurate results, and (2) strategies used to overcome these challenges. Although employing a tool that uses electronic medical record (EMR) unstructured text as the benchmark by which to identify high-risk patients is efficient, choosing appropriate benchmark groups could be challenging given the multiple causes of readmission. Strategies to mitigate these challenges include establishing clear selection criteria to guide benchmark group composition, and quality outcome goals for the hospital. Prior to implementing into practice an innovative EMR-based case-finder driven by unstructured clinical notes, providers are advised to do the following: (1) define patient quality outcome goals, (2) establish criteria by which to guide benchmark selection, and (3) verify the tool's validity and reliability. Achieving consensus on these issues would be necessary for this innovative EHR-based tool to effectively improve clinical decision-making and in turn, decrease readmissions for high-risk patients.

Motion Simulation Research Related Short Term Training Attachment to TARDEC

DTIC Science & Technology

2013-04-01

CASSI group has five main areas of focus, which are, ground vehicle power and mobility , vehicle electronics and architecture, intelligent ground...control, steering as well as seats can all be changed to mock the necessary vehicle. Originally it was designed for a High Mobility Multipurpose Wheeled...necessary outputs to the motion base. SimCreator is a software package, similar to SimuLink. Most of the backend coding is done in C++. RTI accounts

Cyberwar to Wikiwar: Battles for Cyberspace

DTIC Science & Technology

2013-01-01

book, Cypherpunks : Freedom and the Future of Internet, this belief comes into sharp focus. The book takes its name from the cypher- punks movement...intrusive state surveillance. The book is a compila- tion of discussions of fellow believers in the cypherpunks ’ slogan of “privacy for the weak...especially in the case of the Syrian Electronic Army. It is unclear whether the group of cypherpunks would approve of another hacktivist group’s online

Relativistic Electron Precipitation Events Observed at Low Altitude During Electromagnetic Ion Cyclotron Wave Activities Identified Near The Equator.

NASA Astrophysics Data System (ADS)

Shin, D. K.; Lee, D. Y.; Noh, S. J.; Cho, J.; Choi, C.; Hwang, J.; Lee, J.

2017-12-01

Statistical significance of the efficiency of electron loss into the atmosphere by EMIC waves has yet not been quantified through observations. To better understand the dynamics of the radiation belt particle, its quantification through observations is indispensable. In this study, we used a large number of the EMIC wave events identified near the equator for which we determined relativistic electron precipitation (REP) events using the observations at low earth orbit satellites (POES satellite series).We focused on the difference between the wave properties, geomagnetic conditions and background states during the EMIC waves between the event group (EMIC wave with REP) and non-event group (EMIC wave without REP). First, for 11.5 % of the EMIC wave events we were able to identify the REP events within an hour of MLT separation from the EMIC wave location. The majority ( 80 %) of the precipitation-inducing EMIC waves were found in 11 - 17 MLT. Second, geomagnetic conditions (most notably AE) are more often stronger for the event group than non-event group. Third, the EMIC waves of a stronger power and/or a longer duration are on average preferred for event group. Lastly, the majority of the EMIC waves with REP lie outside the plasmapause, most often at L being higher by 2 than the plasmapause locations. In conclusion, this is the first time report on a statistical assessment about the extent to which the EMIC waves directly measured in the equator can be responsible for REP and about their distinguishing features.

Growth and nanomechanical characterization of nanoscale 3D architectures grown via focused electron beam induced deposition

DOE PAGES

Lewis, Brett B.; Mound, Brittnee A.; Srijanto, Bernadeta; ...

2017-10-12

Here, nanomechanical measurements of platinum–carbon 3D nanoscale architectures grown via focused electron beam induced deposition (FEBID) were performed using a nanoindentation system in a scanning electron microscope (SEM) for simultaneous in situ imaging.

Factors that impact nurses' use of electronic mail (e-mail).

PubMed

Hughes, J A; Pakieser, R A

1999-01-01

As electronic applications are used increasingly in healthcare, nurses are being challenged to adopt them. Electronic mail (e-mail) is an electronic tool with general as well as healthcare uses. E-mail use may be an opportunity to learn a tool that requires skills similar to those used in other applications. This study aimed to identify barriers and facilitators that impact nurses' use of e-mail in the workplace. Data for this study were gathered using focus group methodology. Content analysis identified and labeled factors into seven major categories. Specific factors identified were generally consistent with those previously described in the literature as affecting use of computers in general. However, there were several additional factors identified that were not reported in other previous studies: lack of face-to-face communication, individual writing skills, recency of any educational experience, volume of mail received, password integrity, and technical support. Findings from this study provide information for any individual involved in introducing or updating an e-mail system in a healthcare environment.

Accelerated Electron-Beam Formation with a High Capture Coefficient in a Parallel Coupled Accelerating Structure

NASA Astrophysics Data System (ADS)

Chernousov, Yu. D.; Shebolaev, I. V.; Ikryanov, I. M.

2018-01-01

An electron beam with a high (close to 100%) coefficient of electron capture into the regime of acceleration has been obtained in a linear electron accelerator based on a parallel coupled slow-wave structure, electron gun with microwave-controlled injection current, and permanent-magnet beam-focusing system. The high capture coefficient was due to the properties of the accelerating structure, beam-focusing system, and electron-injection system. Main characteristics of the proposed systems are presented.

QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials.

PubMed

Giannozzi, Paolo; Baroni, Stefano; Bonini, Nicola; Calandra, Matteo; Car, Roberto; Cavazzoni, Carlo; Ceresoli, Davide; Chiarotti, Guido L; Cococcioni, Matteo; Dabo, Ismaila; Dal Corso, Andrea; de Gironcoli, Stefano; Fabris, Stefano; Fratesi, Guido; Gebauer, Ralph; Gerstmann, Uwe; Gougoussis, Christos; Kokalj, Anton; Lazzeri, Michele; Martin-Samos, Layla; Marzari, Nicola; Mauri, Francesco; Mazzarello, Riccardo; Paolini, Stefano; Pasquarello, Alfredo; Paulatto, Lorenzo; Sbraccia, Carlo; Scandolo, Sandro; Sclauzero, Gabriele; Seitsonen, Ari P; Smogunov, Alexander; Umari, Paolo; Wentzcovitch, Renata M

2009-09-30

QUANTUM ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). The acronym ESPRESSO stands for opEn Source Package for Research in Electronic Structure, Simulation, and Optimization. It is freely available to researchers around the world under the terms of the GNU General Public License. QUANTUM ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively parallel architectures, and a great effort being devoted to user friendliness. QUANTUM ESPRESSO is evolving towards a distribution of independent and interoperable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes.

Biological photovoltaics: intra- and extra-cellular electron transport by cyanobacteria.

PubMed

Bradley, Robert W; Bombelli, Paolo; Rowden, Stephen J L; Howe, Christopher J

2012-12-01

A large variety of new energy-generating technologies are being developed in an effort to reduce global dependence on fossil fuels, and to reduce the carbon footprint of energy generation. The term 'biological photovoltaic system' encompasses a broad range of technologies which all employ biological material that can harness light energy to split water, and then transfer the resulting electrons to an anode for power generation or electrosynthesis. The use of whole cyanobacterial cells is a good compromise between the requirements of the biological material to be simply organized and transfer electrons efficiently to the anode, and also to be robust and able to self-assemble and self-repair. The principle that photosynthetic bacteria can generate and transfer electrons directly or indirectly to an anode has been demonstrated by a number of groups, although the power output obtained from these devices is too low for biological photovoltaic devices to be useful outside the laboratory. Understanding how photosynthetically generated electrons are transferred through and out of the organism is key to improving power output, and investigations on this aspect of the technology are the main focus of the present review.

Nurses' Experiences of an Initial and Reimplemented Electronic Health Record Use.

PubMed

Chang, Chi-Ping; Lee, Ting-Ting; Liu, Chia-Hui; Mills, Mary Etta

2016-04-01

The electronic health record is a key component of healthcare information systems. Currently, numerous hospitals have adopted electronic health records to replace paper-based records to document care processes and improve care quality. Integrating healthcare information system into traditional nursing daily operations requires time and effort for nurses to become familiarized with this new technology. In the stages of electronic health record implementation, smooth adoption can streamline clinical nursing activities. In order to explore the adoption process, a descriptive qualitative study design and focus group interviews were conducted 3 months after and 2 years after electronic health record system implementation (system aborted 1 year in between) in one hospital located in southern Taiwan. Content analysis was performed to analyze the interview data, and six main themes were derived, in the first stage: (1) liability, work stress, and anticipation for electronic health record; (2) slow network speed, user-unfriendly design for learning process; (3) insufficient information technology/organization support; on the second stage: (4) getting used to electronic health record and further system requirements, (5) benefits of electronic health record in time saving and documentation, (6) unrealistic information technology competence expectation and future use. It concluded that user-friendly design and support by informatics technology and manpower backup would facilitate this adoption process as well.

The Physics and Applications of High Brightness Electron Beams

NASA Astrophysics Data System (ADS)

Palumbo, Luigi; Rosenzweig, J.; Serafini, Luca

2007-09-01

Plenary sessions. RF deflector based sub-Ps beam diagnostics: application to FEL and advanced accelerators / D. Alesini. Production of fermtosecond pulses and micron beam spots for high brightness electron beam applications / S.G. Anderson ... [et al.]. Wakefields of sub-picosecond electron bunches / K.L.F. Bane. Diamond secondary emitter / I. Ben-Zvi ... [et al.]. Parametric optimization for an X-ray free electron laser with a laser wiggler / R. Bonifacio, N. Piovella and M.M. Cola. Needle cathodes for high-brightness beams / C.H. Boulware ... [et al.]. Non linear evolution of short pulses in FEL cascaded undulators and the FEL harmonic cascade / L. Giannessi and P. Musumeci. High brightness laser induced multi-meV electron/proton sources / D. Giulietti ... [et al.]. Emittance limitation of a conditioned beam in a strong focusing FEL undulator / Z. Huang, G. Stupakov and S. Reiche. Scaled models: space-charge dominated electron storage rings / R.A. Kishek ... [et al.]. High brightness beam applications: energy recovered linacs / G.A. Krafft. Maximizing brightness in photoinjectors / C. Limborg-Deprey and H. Tomizawa. Ultracold electron sources / O.J. Luiten ... [et al.]. Scaling laws of structure-based optical accelerators / A. Mizrahi, V. Karagodsky and L. Schächter. High brightness beams-applications to free-electron lasers / S. Reiche. Conception of photo-injectors for the CTF3 experiment / R. Roux. Superconducting RF photoinjectors: an overview / J. Sekutowicz. Status and perspectives of photo injector developments for high brightness beams / F. Stephan. Results from the UCLA/FNLP underdense plasma lens experiment / M.C. Thompson ... [et al.]. Medical application of multi-beam compton scattering monochromatic tunable hard X-ray source / M. Uesaka ... [et al.]. Design of a 2 kA, 30 fs RF-photoinjector for waterbag compression / S.B. Van Der Geer, O.J. Luiten and M.J. De Loos. Proposal for a high-brightness pulsed electron source / M. Zolotorev ... [et al.]. -- Working Group 1. Summary of working group 1 on electron sources / M. Ferrario and G. Gatti. Design and RF measurements of an X-band accelerating structure for the SPARC project / D. Alesini ... [et al.]. Mitigation of RF gun breakdown by removal of tuning rods in high field regions / A.M. Cook... [et al.]. Measurements of quantum efficiency of Mg films produced by pulsed laser ablation deposition for application to bright electron sources / G. Gatti ... [et al.]. The S-band 1.6 cell RF gun correlated energy spread dependence on Pi and 0 mode relative amplitude / F. Schmerge ... [et al.]. RF gun photo-emission model for metal cathodes including time dependent emission / J.F. Schmerge ... [et al.]. Superconducting photocathodes / J. Smedley ... [et al.]. -- Working Group 2. Summary of Working Group 2: diagnostics and beam manipulation / G. Travish. Observation of coherent edge radiation emitted by a 100 Femtosecond compressed electron beam / G. Andonian, M, Dunning, E. Hemsing, J. B. Rosenzweig ... [et al.]. PARMELA simulations for PITZ: first machine studies and interpretation of measurements / M. Boscolo ... [et al.]. The LCLS single-shot relative bunch length monitor system / M.P. Dunning ... [et al.]. Beam shaping and permanent magnet quadrupole focusing with applications to the plasma wakefield accelerator / R.J. England ... [et al.]. Commissioning of the SPARC movable emittance meter and its first operation at PITZ / D. Filippetto... [et al.]. Experimental testing of dynamically optimized photoelectron beams / J.B. Rosenzweig ... [et al.]. Synchronization between the laser and electron beam in a photocathode RF gun / A. Sakumi ... [et al.]. Method of bunch radiation photochronography with 10 Femtosecond and less resolution / A. Tron and I. Merinov -- Working Group 3. New challenges in theory and modeling-summary for working group 3. L. Giannessi. Resonant modes in a 1.6 cells RF gun / M. Ferrario and C. Ronsivalle. Emittance degradation due to wake fields in a high brightness photoinjector / M. Ferrario, V. Fusco, M. Migliorati and L. Palumbo. Simulations of coherent synchroton radiation effects in electron machines / M. Migliorati, A, Schiavi and G. Dattoli. QFEL: A numerical code for multi-dimensional simulation of free electron lasers in the quantum regime / A. Schiavi ... [et al.]. First simulations results on laser pulse jitter and microbunching instability at Saprxino / M. Boscolo ... [et al.]. -- Working Group 4. Working group 4 summary: applications of high brightness beams to advanced accelerators and light sources / M. Uesaka and A. Rossi. Study of transverse effects in the production of X-rays with free-electron laser based on an optical ondulator / A. Bacci ... [et al.]. Channeling projects at LNF: from crystal undulators to capillary waveguides / S.B. Dabagov ... [et al.]. Mono-Energetic electron generation and plasma diagnosis experiments in a laser plasma cathode / K. Kinoshita ... [et al.]. A high-density electron beam and quad-scan measurements at Pleiades Thompson X-ray source / J.K. Lim ... [et al.]. Laser pulse circulation system for compact monochromatic tunable hard X-ray source / H. Ogino ... [et al.]. Limits on production of narrow band photons from inverse compton scattering / J. Rosenzweig and O. Williams. Preliminary results from the UCLA/SLAC ultra-high gradient Cerenkov wakefield accelerator experiment / M.C. Thompson ... [et al.]. Status of the polarized nonlinear inverse compton scattering experiment at UCLA / O. Williams... [et al.]. Coupling laser power into a slab-symmetric accelerator structure / R.B. Yoder and J.B. Rosenzweig.

Light and redox switchable molecular components for molecular electronics.

PubMed

Browne, Wesley R; Feringa, Ben L

2010-01-01

The field of molecular and organic electronics has seen rapid progress in recent years, developing from concept and design to actual demonstration devices in which both single molecules and self-assembled monolayers are employed as light-responsive components. Research in this field has seen numerous unexpected challenges that have slowed progress and the initial promise of complex molecular-based computers has not yet been realised. Primarily this has been due to the realisation at an early stage that molecular-based nano-electronics brings with it the interface between the hard (semiconductor) and soft (molecular) worlds and the challenges which accompany working in such an environment. Issues such as addressability, cross-talk, molecular stability and perturbation of molecular properties (e.g., inhibition of photochemistry) have nevertheless driven development in molecular design and synthesis as well as our ability to interface molecular components with bulk metal contacts to a very high level of sophistication. Numerous groups have played key roles in progressing this field not least teams such as those led by Whitesides, Aviram, Ratner, Stoddart and Heath. In this short review we will however focus on the contributions from our own group and those of our collaborators, in employing diarylethene based molecular components.

Focused electron and ion beam systems

DOEpatents

Leung, Ka-Ngo; Reijonen, Jani; Persaud, Arun; Ji, Qing; Jiang, Ximan

2004-07-27

An electron beam system is based on a plasma generator in a plasma ion source with an accelerator column. The electrons are extracted from a plasma cathode in a plasma ion source, e.g. a multicusp plasma ion source. The beam can be scanned in both the x and y directions, and the system can be operated with multiple beamlets. A compact focused ion or electron beam system has a plasma ion source and an all-electrostatic beam acceleration and focusing column. The ion source is a small chamber with the plasma produced by radio-frequency (RF) induction discharge. The RF antenna is wound outside the chamber and connected to an RF supply. Ions or electrons can be extracted from the source. A multi-beam system has several sources of different species and an electron beam source.

Openness of patients' reporting with use of electronic records: psychiatric clinicians' views

PubMed Central

Blackford, Jennifer Urbano; Rosenbloom, S Trent; Seidel, Sandra; Clayton, Ellen Wright; Dilts, David M; Finder, Stuart G

2010-01-01

Objectives Improvements in electronic health record (EHR) system development will require an understanding of psychiatric clinicians' views on EHR system acceptability, including effects on psychotherapy communications, data-recording behaviors, data accessibility versus security and privacy, data quality and clarity, communications with medical colleagues, and stigma. Design Multidisciplinary development of a survey instrument targeting psychiatric clinicians who recently switched to EHR system use, focus group testing, data analysis, and data reliability testing. Measurements Survey of 120 university-based, outpatient mental health clinicians, with 56 (47%) responding, conducted 18 months after transition from a paper to an EHR system. Results Factor analysis gave nine item groupings that overlapped strongly with five a priori domains. Respondents both praised and criticized the EHR system. A strong majority (81%) felt that open therapeutic communications were preserved. Regarding data quality, content, and privacy, clinicians (63%) were less willing to record highly confidential information and disagreed (83%) with including their own psychiatric records among routinely accessed EHR systems. Limitations single time point; single academic medical center clinic setting; modest sample size; lack of prior instrument validation; survey conducted in 2005. Conclusions In an academic medical center clinic, the presence of electronic records was not seen as a dramatic impediment to therapeutic communications. Concerns regarding privacy and data security were significant, and may contribute to reluctances to adopt electronic records in other settings. Further study of clinicians' views and use patterns may be helpful in guiding development and deployment of electronic records systems. PMID:20064802

Use of electronic dietary assessment tools in primary care: an interdisciplinary perspective.

PubMed

Bonilla, Carolina; Brauer, Paula; Royall, Dawna; Keller, Heather; Hanning, Rhona M; DiCenso, Alba

2015-02-25

Dietary assessment can be challenging for many reasons, including the wide variety of foods, eating patterns and nutrients to be considered. In team-based primary care practice, various disciplines may be involved in assessing diet. Electronic-based dietary assessment (e-DA) instruments available now through mobile apps or websites can potentially facilitate dietary assessment. Providers views of facilitators and barriers related to e-DA instruments and their recommendations for improvement can inform the further development of these tools. The objective of this study was to explore provider perspectives on e-DA tools in mobile apps and websites. The exploratory sequential mixed methods design included interdisciplinary focus groups followed by a web-based survey sent to Family Health Teams throughout Ontario, Canada. Descriptive and bivariate analyses were completed. Focus group transcripts contributed to web-survey content, while interpretive themes added depth and context. 11 focus groups with 50 providers revealed varying perspectives on the use of e-DA for: 1) improving patients' eating habits; 2) improving the quality of dietary assessment; and, 3) integrating e-DA into the care process. In the web-survey 191 respondents from nine disciplines in 73 FHTs completed the survey. Dietitians reported greater use of e-DA than other providers (63% vs.19%; p = .000) respectively. There was strong interest among disciplines in the use of e-DA tools for the management of obesity, diabetes and heart disease, especially for patient self-monitoring. Barriers identified were: patients' lack of comfort with using technology, misinterpretation of e-DA results by patients, time and education for providers to interpret results, and time for providers to offer counselling. e-DA tools in mobile apps and websites may improve dietary counselling over time. Addressing the identified facilitators and barriers can potentially promote the uptake of e-DA into clinical practice.

Secondary Electron Emission from Plasma Processed Accelerating Cavity Grade Niobium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basovic, Milos

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier. Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for highermore » energy upgrades of existing accelerators and more compact designs of new accelerators. Each new and improved technology was faced with ever emerging limiting factors. With the standard high accelerating gradients of more than 25 MV/m, free electrons inside the cavities get accelerated by the field, gaining enough energy to produce more electrons in their interactions with the walls of the cavity. The electron production is exponential and the electron energy transfer to the walls of a cavity can trigger detrimental processes, limiting the performance of the cavity. The root cause of the free electron number gain is a phenomenon called Secondary Electron Emission (SEE). Even though the phenomenon has been known and studied over a century, there are still no effective means of controlling it. The ratio between the electrons emitted from the surface and the impacting electrons is defined as the Secondary Electron Yield (SEY). A SEY ratio larger than 1 designates an increase in the total number of electrons. In the design of accelerator cavities, the goal is to reduce the SEY to be as low as possible using any form of surface manipulation. In this dissertation, an experimental setup was developed and used to study the SEY of various sample surfaces that were treated by different techniques. Specifically, this work provides the results of SEY from the plasma cleaned cavity grade niobium (Nb) samples. Pure niobium is currently the material of choice for the fabrication of Superconducting Radio Frequency (SRF) cavities. The effect of plasma processing with two different gases will be examined in two groups of samples. The first group of samples is made from cavity grade niobium. The second group of samples is made from the same material, but include a welded joint made by electron beam welding, since in niobium SRF cavities the peak electric and magnetic field are seen in close proximity to the welded joints. Both groups of samples will be exposed to nitrogen (N2) and a mixture of argon with oxygen (Ar/O2) plasma. It is the goal of this research to determine the SEY on these two groups of samples before and after plasma processing as a function of the energy of primary electrons. The SEY as a function of the angle of incidence of the primary electrons is tested on the samples treated with Ar/O2 plasma.« less

NASA-DoD Lower Process Temperature Lead-Free Solder Project Overview

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2014-01-01

This project is a follow-on effort to the Joint Council on Aging AircraftJoint Group on Pollution Prevention (JCAAJG-PP) Pb-free Solder Project and NASA-DoD Lead-Free Electronics Project which were the first projects to test the reliability of Pb-free solder joints against the requirements of the aerospace and military community. This effort would continue to build on the results from the JCAAJG-PP Lead-Free Solder Project and NASA-DoD Lead-Free Electronics Project while focusing on a particular failure mechanism currently plaguing Pb-free assemblies, pad cratering.The NASA-DoD Lead-Free Electronics Project confirmed that pad cratering is one of the dominant failure modes that occur in various board level reliability tests, especially under dynamic loading. Pad Cratering is a latent defect that may occur during assembly, rework, and post assembly handling and testing.

Structural basis for cellobiose dehydrogenase action during oxidative cellulose degradation

NASA Astrophysics Data System (ADS)

Tan, Tien-Chye; Kracher, Daniel; Gandini, Rosaria; Sygmund, Christoph; Kittl, Roman; Haltrich, Dietmar; Hällberg, B. Martin; Ludwig, Roland; Divne, Christina

2015-07-01

A new paradigm for cellulose depolymerization by fungi focuses on an oxidative mechanism involving cellobiose dehydrogenases (CDH) and copper-dependent lytic polysaccharide monooxygenases (LPMO); however, mechanistic studies have been hampered by the lack of structural information regarding CDH. CDH contains a haem-binding cytochrome (CYT) connected via a flexible linker to a flavin-dependent dehydrogenase (DH). Electrons are generated from cellobiose oxidation catalysed by DH and shuttled via CYT to LPMO. Here we present structural analyses that provide a comprehensive picture of CDH conformers, which govern the electron transfer between redox centres. Using structure-based site-directed mutagenesis, rapid kinetics analysis and molecular docking, we demonstrate that flavin-to-haem interdomain electron transfer (IET) is enabled by a haem propionate group and that rapid IET requires a closed CDH state in which the propionate is tightly enfolded by DH. Following haem reduction, CYT reduces LPMO to initiate oxygen activation at the copper centre and subsequent cellulose depolymerization.

Sturgeons, sharks, and rays have multifocal crystalline lenses and similar lens suspension apparatuses.

PubMed

Gustafsson, Ola S E; Ekström, Peter; Kröger, Ronald H H

2012-07-01

Crystalline lenses with multiple focal lengths in monochromatic light (multifocal lenses) are present in many vertebrate groups. These lenses compensate for chromatic aberration and create well-focused color images. Stabilization of the lens within the eye and the ability to adjust focus are further requirements for vision in high detail. We investigated the occurrence of multifocal lenses by photorefractometry and lens suspension structures by light and electron microscopy in sturgeons (Acipenseriformes, Chondrostei) as well as sharks and rays (Elasmobranchii, Chondrichthyes). Multifocal lenses were found in two more major vertebrate groups, the Chondrostei represented by Acipenseriformes and Chondrichthyes represented by Elasmobranchii. The lens suspension structures of sturgeons, sharks, and rays are more complex than described previously. The lens is suspended by many delicate suspensory fibers in association with a ventral papilla in all groups studied. The arrangements of the suspensory fibers are most similar between sturgeons and sharks. In rays, the lens is suspended by a smaller ventral papilla and the suspensory fibers are arranged more concentrically to the lens. Copyright © 2012 Wiley Periodicals, Inc.

'Maybe they should regulate them quite strictly until they know the true dangers': a focus group study exploring UK adolescents' views on e-cigarette regulation.

PubMed

Weishaar, Heide; Trevisan, Filippo; Hilton, Shona

2016-09-01

Regulation of electronic cigarettes has moved to the top of the addiction policy agenda, as demonstrated by the recent focus across the United Kingdom on introducing age-of-sale restrictions. However, the views of those affected by such regulation remain largely unexplored. This paper presents the first detailed qualitative exploration of adolescents' perceptions of existing, and opinions about potential e-cigarette regulation. Sixteen focus groups, including a total of 83 teenagers between the ages of 14 and 17 years, were conducted in deprived, mixed and affluent urban areas in Scotland and England between November 2014 and February 2015. Transcripts were imported into Nivivo 10, coded thematically and analysed. Participants critically considered existing evidence and competing interests in regulatory debates and demonstrated sophisticated understanding of the advantages and disadvantages of regulation. They overwhelmingly supported strong e-cigarette regulation and endorsed restrictions on sales to minors, marketing and e-cigarette use in public places. Concern about potential health harms of e-cigarette use and marketing increasing the acceptability of vaping and smoking led these adolescents to support regulation. In focus group discussions, a sample of UK adolescents exposed to particular communications about e-cigarettes supported strict regulation of e-cigarettes, including banning sales to minors and use in indoor public areas. © 2016 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

Electronic and optical properties of strained graphene and other strained 2D materials: a review.

PubMed

Naumis, Gerardo G; Barraza-Lopez, Salvador; Oliva-Leyva, Maurice; Terrones, Humberto

2017-09-01

This review presents the state of the art in strain and ripple-induced effects on the electronic and optical properties of graphene. It starts by providing the crystallographic description of mechanical deformations, as well as the diffraction pattern for different kinds of representative deformation fields. Then, the focus turns to the unique elastic properties of graphene, and to how strain is produced. Thereafter, various theoretical approaches used to study the electronic properties of strained graphene are examined, discussing the advantages of each. These approaches provide a platform to describe exotic properties, such as a fractal spectrum related with quasicrystals, a mixed Dirac-Schrödinger behavior, emergent gravity, topological insulator states, in molecular graphene and other 2D discrete lattices. The physical consequences of strain on the optical properties are reviewed next, with a focus on the Raman spectrum. At the same time, recent advances to tune the optical conductivity of graphene by strain engineering are given, which open new paths in device applications. Finally, a brief review of strain effects in multilayered graphene and other promising 2D materials like silicene and materials based on other group-IV elements, phosphorene, dichalcogenide- and monochalcogenide-monolayers is presented, with a brief discussion of interplays among strain, thermal effects, and illumination in the latter material family.

Internet-based self-management offers an opportunity to achieve better asthma control in adolescents.

PubMed

van der Meer, Victor; van Stel, Henk F; Detmar, Symone B; Otten, Wilma; Sterk, Peter J; Sont, Jacob K

2007-07-01

Internet and short message service are emerging tools for chronic disease management in adolescents, but few data exist on the barriers to and benefits of internet-based asthma self-management. Our objective was to reveal the barriers and benefits perceived by adolescents with well-controlled and poorly controlled asthma to current and internet-based asthma management. Ninety-seven adolescents with mild-to-moderate persistent asthma monitored their asthma control on a designated Web site. After 4 weeks, 35 adolescents participated in eight focus groups. Participants were stratified in terms of age, gender, and asthma control level. We used qualitative and quantitative methods to analyze the written focus group transcripts. Limited self-efficacy to control asthma was a significant barrier to current asthma management in adolescents with poor asthma control (65%) compared to adolescents with good asthma control (17%; p < 0.01). The former group revealed the following several benefits from internet-based asthma self-management: feasible electronic monitoring; easily accessible information; e-mail communication; and use of an electronic action plan. Personal benefits included the ability to react to change and to optimize asthma control. Patients with poor asthma control were able and ready to incorporate internet-based asthma self-management for a long period of time (65%), whereas patients with good control were not (11%; p < 0.01). Our findings reveal a need for the support of self-management in adolescents with poorly controlled asthma that can be met by the application of novel information and communication technologies. Internet-based self-management should therefore target adolescents with poor asthma control.

The State of Group Support System Research through a Survey of Papers 1980 to 1991

DTIC Science & Technology

1991-09-01

September 1991 Author: _____ Matthew G. Rausch Approved by: I ’K . Tung X. Bui, Thesis Advisor -Moshe Z iran ,econd Reader Department of Admih sraiv Siences ...focus of their support features (voting/analytical modeling, communication/idea organization, game theory/ conflict analysis), and still others by...Moncrieff, J., Taylor, A., April 1990, "Talking with JIMMY Using Electronic Publications in Higher Education," Online Review, Vol. 14, No. 2. Minch, P

Enhanced Learning through Electronic Communities: A Research Review.

ERIC Educational Resources Information Center

Burgstahler, Sheryl; Swift, Catherine

This report, in support of the project "Enhanced Learning through Electronic Communities," investigated successful practices of electronic communities. A literature review was conducted and a survey was sent to 15 system operators of networks that had a community-based focus with ancillary educational components and networks that focused primarily…

Technological viewpoints (frames) about electronic prescribing in physician practices.

PubMed

Agarwal, Ritu; Angst, Corey M; DesRoches, Catherine M; Fischer, Michael A

2010-01-01

Physician practices may adopt and use electronic prescribing (eRx) in response to mandates, incentives, and perceived value of the technology. Yet, for the most part, diffusion has been limited and geographically confined, and even when adopted, use of eRx in many practices has been low. One explanation for this phenomenon is that decision-makers in the practices possess different technological viewpoints (frames) related to eRx and these frames have formed the basis for the adoption decision, expectations about the technology, and patterns of use. In this study eRx technological frames were examined. Focus groups, direct observation, and semi-structured interviews were conducted with physicians, practice managers, nurses, and other medical staff. Focus groups were observed, taped, transcribed, and analyzed to reveal themes. These themes guided the observational visits and subsequent interviews. A triangulation process was used to confirm the findings. Seven frames emerged from the qualitative analysis ranging from positive to neutral to negative: (1) eRx as an efficiency and effectiveness enhancing tool; (2) eRx as the harbinger of new practices; (3) eRx as core to the clinical workflow; (4) eRx as an administrative tool; (5) eRx: the artifact; (6) eRx as a necessary evil; and (7) eRx as an unwelcome disruption. Frames provide a unique perspective within which to explore the adoption and use of eRx and may explain why perceptions of value vary greatly. Some frames facilitate effective use of eRx while others impose barriers. Electronic prescribing can be viewed as a transitional technology on the path to greater digitization at the physician practice level. Understanding the impact of technological frames on the effectiveness of eRx use may provide lessons for the implementation of future health information technology innovations.

Technological viewpoints (frames) about electronic prescribing in physician practices

PubMed Central

Agarwal, Ritu; DesRoches, Catherine M; Fischer, Michael A

2010-01-01

Objective Physician practices may adopt and use electronic prescribing (eRx) in response to mandates, incentives, and perceived value of the technology. Yet, for the most part, diffusion has been limited and geographically confined, and even when adopted, use of eRx in many practices has been low. One explanation for this phenomenon is that decision-makers in the practices possess different technological viewpoints (frames) related to eRx and these frames have formed the basis for the adoption decision, expectations about the technology, and patterns of use. In this study eRx technological frames were examined. Design Focus groups, direct observation, and semi-structured interviews were conducted with physicians, practice managers, nurses, and other medical staff. Measurements Focus groups were observed, taped, transcribed, and analyzed to reveal themes. These themes guided the observational visits and subsequent interviews. A triangulation process was used to confirm the findings. Results Seven frames emerged from the qualitative analysis ranging from positive to neutral to negative: (1) eRx as an efficiency and effectiveness enhancing tool; (2) eRx as the harbinger of new practices; (3) eRx as core to the clinical workflow; (4) eRx as an administrative tool; (5) eRx: the artifact; (6) eRx as a necessary evil; and (7) eRx as an unwelcome disruption. Conclusion Frames provide a unique perspective within which to explore the adoption and use of eRx and may explain why perceptions of value vary greatly. Some frames facilitate effective use of eRx while others impose barriers. Electronic prescribing can be viewed as a transitional technology on the path to greater digitization at the physician practice level. Understanding the impact of technological frames on the effectiveness of eRx use may provide lessons for the implementation of future health information technology innovations. PMID:20595310

Electronic Brief Intervention and Text Messaging for Marijuana Use During Pregnancy: Initial Acceptability of Patients and Providers

PubMed Central

Gray, Justin; Svikis, Dace S; Puder, Karoline S; Resnicow, Ken; Konkel, Janine; Rice, Shetoya; McGoron, Lucy; Ondersma, Steven J

2017-01-01

Background Marijuana is the most widely used illicit substance during pregnancy. Technology-delivered brief interventions and text messaging have shown promise in general and pregnant samples but have not yet been applied to marijuana use in pregnancy. Objective The objective of the study was to evaluate, among pregnant women and prenatal care providers, the acceptability of an electronic brief intervention and text messaging plan for marijuana use in pregnancy. Methods Participants included patients (n=10) and medical staff (n=12) from an urban prenatal clinic. Patient-participants were recruited directly during a prenatal care visit. Those who were eligible reviewed the interventions individually and provided quantitative and qualitative feedback regarding software acceptability and helpfulness during a one-on-one interview with research staff. Provider-participants took part in focus groups in which the intervention materials were reviewed and discussed. Qualitative and focus group feedback was transcribed, coded manually, and classified by category and theme. Results Patient-participants provided high ratings for satisfaction, with mean ratings for respectfulness, interest, ease of use, and helpfulness ranging between 4.4 and 4.7 on a 5-point Likert scale. Of the 10 participants, 5 reported that they preferred working with the program versus their doctor, and 9 of 10 said the intervention made them more likely to reduce their marijuana use. Provider-participants received the program favorably, stating the information presented was both relevant and important for their patient population. Conclusions The findings support the acceptability of electronic brief intervention and text messaging for marijuana use during pregnancy. This, combined with their ease of use and low barrier to initiation, suggests that further evaluation in a randomized trial is appropriate. PMID:29117931

Understanding the Impact of Field-Emitter Characteristics on Electron Beam Focusing in the VAPoR Time-of-Fight Mass Spectrometer

NASA Technical Reports Server (NTRS)

Southard, Adrian E.; Getty, Stephanie A.; Costen, Nicholas P.; Hidrobo, Gregory B.; Glavin, Daniel P.

2013-01-01

Simulations of field emission of electrons from an electron gun are used to determine the angular distribution of the emitted electron beam and the percentage of charge transmitted through the grid. The simulations are a first step towards understanding the spherical aberration present after focusing the electron beam. The effect of offset of the cathode with respect to the grid and the separation between cathode and grid on the angular distributions of emitted electrons and transmission of the grid are explored.

Formation of Supported Graphene Oxide: Evidence for Enolate Species.

PubMed

Novotny, Zbynek; Nguyen, Manh-Thuong; Netzer, Falko P; Glezakou, Vassiliki-Alexandra; Rousseau, Roger; Dohnálek, Zdenek

2018-04-18

Graphene oxides are promising materials for novel electronic devices or anchoring of the active sites for catalytic applications. Here we focus on understanding the atomic oxygen (AO) binding and mobility on different regions of graphene (Gr) on Ru(0001). Differences in the Gr/Ru lattices result in the superstructure, which offers an array of distinct adsorption sites. We employ scanning tunneling microscopy and density functional theory to map out the chemical identity and stability of prepared AO functionalities in different Gr regions. The AO diffusion is utilized to establish that in the regions that are close to the metal substrate the terminally bonded enolate groups are strongly preferred over bridge-bonded epoxy groups. No oxygen species are observed on the graphene regions that are far from the underlying Ru, indicating their low relative stability. This study provides a clear fundamental basis for understanding the local structural, electronic factors and C-Ru bond strengthening/weakening processes that affect the stability of enolate and epoxy species.

Electronic structure and physicochemical properties of selected penicillins

NASA Astrophysics Data System (ADS)

Soriano-Correa, Catalina; Ruiz, Juan F. Sánchez; Raya, A.; Esquivel, Rodolfo O.

Traditionally, penicillins have been used as antibacterial agents due to their characteristics and widespread applications with few collateral effects, which have motivated several theoretical and experimental studies. Despite the latter, their mechanism of biological action has not been completely elucidated. We present a theoretical study at the Hartree-Fock and density functional theory (DFT) levels of theory of a selected group of penicillins such as the penicillin-G, amoxicillin, ampicillin, dicloxacillin, and carbenicillin molecules, to systematically determine the electron structure of full ?-lactam antibiotics. Our results allow us to analyze the electronic properties of the pharmacophore group, the aminoacyl side-chain, and the influence of the substituents (R and X) attached to the aminoacyl side-chain at 6? (in contrast with previous studies focused at the 3? substituents), and to corroborate the results of previous studies performed at the semiempirical level, solely on the ?-lactam ring of penicillins. Besides, several density descriptors are determined with the purpose of analyzing their link to the antibacterial activity of these penicillin compounds. Our results for the atomic charges (fitted to the electrostatic potential), the bond orders, and several global reactivity descriptors, such as the dipole moments, ionization potential, hardness, and the electrophilicity index, led us to characterize: the active sites, the effect of the electron-attracting substituent properties and their physicochemical features, which altogether, might be important to understand the biological activity of these type of molecules.

How Does the Electron Dynamics Affect the Global Reconnection Rate

NASA Technical Reports Server (NTRS)

Hesse, Michael

2012-01-01

The question of whether the microscale controls the macroscale or vice-versa remains one of the most challenging problems in plasmas. A particular topic of interest within this context is collisionless magnetic reconnection, where both points of views are espoused by different groups of researchers. This presentation will focus on this topic. We will begin by analyzing the properties of electron diffusion region dynamics both for guide field and anti-parallel reconnection, and how they can be scaled to different inflow conditions. As a next step, we will study typical temporal variations of the microscopic dynamics with the objective of understanding the potential for secular changes to the macroscopic system. The research will be based on a combination of analytical theory and numerical modeling.

"I'm Scared of the Disappointment": Young Adult Smokers' Relational Identity Gaps and Management Strategies as Sites of Communication Intervention.

PubMed

Stanley, Samantha J; Pitts, Margaret Jane

2018-02-22

While cigarette smoking is decreasing among young adults, rates of nicotine consumption through other devices, most notably electronic cigarettes, are on the rise. Framed by communication theory of identity, this study examines young adult smokers' experiences with relational others in regard to their smoking. Focus group discussions and individual interviews convened with 20 young adult cigarette and electronic cigarette smokers revealed identity gaps implicating the relational layer of identity, including personal-relational, enacted-relational, and personal-enacted-relational identity gaps. Participants used communicative and behavioral strategies to manage relational discrepancies. The documented identity gaps and management strategies present opportunities for targeted smoking cessation interventions that amplify dissonance created through identity gaps as a motivational tactic.

Smart army helmet: a glance in what soldier helmets can become in the near future by integrating present technologies

NASA Astrophysics Data System (ADS)

Betancur, J. Alejandro; Osorio-Gómez, Gilberto; Mejía, Alejandro; Rodriguez, Carlos A.

2014-05-01

Nowadays, technologies like improved reality systems, sensing systems and communication systems, are moving forward with a high rate. This situation is very convenient for military groups that are trying to access modern technologies. According to that, it is very feasible to propose the development of electronic devices that increase the possibilities for soldiers to be alive during an armed conflict, providing them with information that can bring strategic benefits on the combat field, which is the main goal of this research. Therefore, it is proposed in this paper the early design stages of a smart army helmet, focusing in their low cost production; however, all the electronics stages specified here are proposed as prototypes.

Gamma-ray generation in the interaction of two tightly focused laser pulses with a low-density target composed of electrons

NASA Astrophysics Data System (ADS)

Jirka, M.; Klimo, O.; Weber, S.; Bulanov, Sergei V.; Esirkepov, Timur Zh.; Korn, G.

2015-05-01

With the continuing development of laser systems, new important and so-far unexplored fields of research related to interaction of ultra-intense laser beams with matter are opening. At intensities of the order of 1022 W=cm2, electrons may be accelerated in the electromagnetic field of the laser wave and achieve such a high energy that they can enter the regime affected by the radiation reaction. Due to the non-linear Thomson and Compton scattering the accelerated electrons emit photons. The interaction of emitted photons with the laser field may result in effective generation of electron-positron pairs by means of the Breit-Wheeler process. In this work we study the influence of laser pulse polarization on gamma-ray generation during interaction of two colliding and tightly focused laser pulses with a low density target composed of electrons. This paper focuses on evolution of electron trajectories and key parameters χe (probability of photon emission) and χγ(probability of pair generation) in the laser field. These interactions are studied using 2D PIC simulations. It is shown that in the case of circularly polarized and tightly focused laser beams, electrons are not following circular trajectories at the magnetic node of the standing wave established in the focus, which leads to lowering the radiation emission efficiency.

Guiding and focusing of fast electron beams produced by ultra-intense laser pulse using a double cone funnel target

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Wen-shuai; Cai, Hong-bo, E-mail: Cai-hongbo@iapcm.ac.cn; HEDPS, Center for Applied Physics and Technology, Peking University, Beijing 100871

A novel double cone funnel target design aiming at efficiently guiding and focusing fast electron beams produced in high intensity (>10{sup 19 }W/cm{sup 2}) laser-solid interactions is investigated via two-dimensional particle-in-cell simulations. The forward-going fast electron beams are shown to be directed and focused to a smaller size in comparison with the incident laser spot size. This plasma funnel attached on the cone target guides and focuses electrons in a manner akin to the control of liquid by a plastic funnel. Such device has the potential to add substantial design flexibility and prevent inefficiencies for important applications such as fast ignition.more » Two reasons account for the collimation of fast electron beams. First, the sheath electric fields and quasistatic magnetic fields inside the vacuum gap of the double cone provide confinement of the fast electrons in the laser-plasma interaction region. Second, the interface magnetic fields inside the beam collimator further guide and focus the fast electrons during the transport. The application of this technique to cone-guided fast ignition is considered, and it is shown that it can enhance the laser energy deposition in the compressed fuel plasma by a factor of 2 in comparison with the single cone target case.« less

Backward-propagating MeV electrons in ultra-intense laser interactions: Standing wave acceleration and coupling to the reflected laser pulse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orban, Chris, E-mail: orban@physics.osu.edu; Feister, Scott; Innovative Scientific Solutions, Inc., Dayton, Ohio 45459

Laser-accelerated electron beams have been created at a kHz repetition rate from the reflection of intense (∼10{sup 18 }W/cm{sup 2}), ∼40 fs laser pulses focused on a continuous water-jet in an experiment at the Air Force Research Laboratory. This paper investigates Particle-in-Cell simulations of the laser-target interaction to identify the physical mechanisms of electron acceleration in this experiment. We find that the standing-wave pattern created by the overlap of the incident and reflected laser is particularly important because this standing wave can “inject” electrons into the reflected laser pulse where the electrons are further accelerated. We identify two regimes of standingmore » wave acceleration: a highly relativistic case (a{sub 0} ≥ 1), and a moderately relativistic case (a{sub 0} ∼ 0.5) which operates over a larger fraction of the laser period. In previous studies, other groups have investigated the highly relativistic case for its usefulness in launching electrons in the forward direction. We extend this by investigating electron acceleration in the specular (back reflection) direction and over a wide range of intensities (10{sup 17}–10{sup 19 }W cm{sup −2})« less

STUDIES OF A FREE ELECTRON LASER DRIVEN BY A LASER-PLASMA ACCELERATOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montgomery, A.; Schroeder, C.; Fawley, W.

A free electron laser (FEL) uses an undulator, a set of alternating magnets producing a periodic magnetic fi eld, to stimulate emission of coherent radiation from a relativistic electron beam. The Lasers, Optical Accelerator Systems Integrated Studies (LOASIS) group at Lawrence Berkeley National Laboratory (LBNL) will use an innovative laserplasma wakefi eld accelerator to produce an electron beam to drive a proposed FEL. In order to optimize the FEL performance, the dependence on electron beam and undulator parameters must be understood. Numerical modeling of the FEL using the simulation code GINGER predicts the experimental results for given input parameters. Amongmore » the parameters studied were electron beam energy spread, emittance, and mismatch with the undulator focusing. Vacuum-chamber wakefi elds were also simulated to study their effect on FEL performance. Energy spread was found to be the most infl uential factor, with output FEL radiation power sharply decreasing for relative energy spreads greater than 0.33%. Vacuum chamber wakefi elds and beam mismatch had little effect on the simulated LOASIS FEL at the currents considered. This study concludes that continued improvement of the laser-plasma wakefi eld accelerator electron beam will allow the LOASIS FEL to operate in an optimal regime, producing high-quality XUV and x-ray pulses.« less

New pediatric vision screener, part II: electronics, software, signal processing and validation.

PubMed

Gramatikov, Boris I; Irsch, Kristina; Wu, Yi-Kai; Guyton, David L

2016-02-04

We have developed an improved pediatric vision screener (PVS) that can reliably detect central fixation, eye alignment and focus. The instrument identifies risk factors for amblyopia, namely eye misalignment and defocus. The device uses the birefringence of the human fovea (the most sensitive part of the retina). The optics have been reported in more detail previously. The present article focuses on the electronics and the analysis algorithms used. The objective of this study was to optimize the analog design, data acquisition, noise suppression techniques, the classification algorithms and the decision making thresholds, as well as to validate the performance of the research instrument on an initial group of young test subjects-18 patients with known vision abnormalities (eight male and 10 female), ages 4-25 (only one above 18) and 19 controls with proven lack of vision issues. Four statistical methods were used to derive decision making thresholds that would best separate patients with abnormalities from controls. Sensitivity and specificity were calculated for each method, and the most suitable one was selected. Both the central fixation and the focus detection criteria worked robustly and allowed reliable separation between normal test subjects and symptomatic subjects. The sensitivity of the instrument was 100 % for both central fixation and focus detection. The specificity was 100 % for central fixation and 89.5 % for focus detection. The overall sensitivity was 100 % and the overall specificity was 94.7 %. Despite the relatively small initial sample size, we believe that the PVS instrument design, the analysis methods employed, and the device as a whole, will prove valuable for mass screening of children.

Time-of-flight measurement of ionic species generated during ablation for optimization of focusing condition at free-electron laser beamline

NASA Astrophysics Data System (ADS)

Senba, Y.; Nagasono, M.; Koyama, T.; Yumoto, H.; Ohashi, H.; Tono, K.; Togashi, T.; Inubushi, Y.; Sato, T.; Yabashi, M.; Ishikawa, T.

2013-03-01

Optimization of focusing conditions is important in free-electron laser applications. A time-of-flight mass analyzer has been designed and constructed for this purpose. The time-of-flight spectra of ionic species evolved from laser ablation of gold were measured. The yields of ionic species showed strong correlations with free-electron-laser intensity. This method conveniently allows for direct estimation of laser intensity on sample and determination of focusing position.

NREL Joins Initiative to Boost Power Electronics Energy Efficiency and Job

Science.gov Websites

Electronics and Electric Machines team, which focuses on vehicle component research and development (R&D current silicon-based components in the next five years. The institute will bring partners together to power electronics thermal management and reliability R&D, NREL's research in this area focuses on

A qualitative study on feedback provided by students in nurse education.

PubMed

Chan, Zenobia C Y; Stanley, David John; Meadus, Robert J; Chien, Wai Tong

2017-08-01

This study aims to help nurse educators/academics understand the perspectives and expectations of students providing their feedback to educators about teaching performance and subject quality. The aim of this study is to reveal students' voices regarding their feedback in nurse education in order to shed light on how the current student feedback practice may be modified. A qualitative study using focus group inquiry. Convenience sampling was adopted and participants recruited from one school of nursing in Hong Kong. A total of 66 nursing students from two pre-registration programs were recruited for seven focus group interviews: one group of Year 1 students (n=21), two groups of Year 3 students (n=27), and four groups of Final Year students (n=18). The interviews were guided by a semi-structured interview guideline and the interview narratives were processed through content analysis. The trustworthiness of this study was guaranteed through peer checking, research meetings, and an audit trail. The participants' privacy was protected throughout the study. Four core themes were discerned based on the narratives of the focus group interviews: (1) "timing of collecting feedback at more than one time point"; (2) "modify the questions being asked in collecting student feedback"; (3) "are electronic means of collecting feedback good enough?; and (4) "what will be next for student feedback?". This study is significant in the following three domains: 1) it contributed to student feedback because it examined the issue from a student's perspective; 2) it explored the timing and channels for collecting feedback from the students' point of view; and 3) it showed the preferred uses of student feedback. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Non-fullerene acceptors for organic solar cells

NASA Astrophysics Data System (ADS)

Yan, Cenqi; Barlow, Stephen; Wang, Zhaohui; Yan, He; Jen, Alex K.-Y.; Marder, Seth R.; Zhan, Xiaowei

2018-03-01

Non-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts. Historically, the performance of NFA OSCs has lagged behind that of fullerene devices. However, recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 13%, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs. This Review discusses the important work that has led to this remarkable progress, focusing on the two most promising NFA classes to date: rylene diimide-based materials and materials based on fused aromatic cores with strong electron-accepting end groups. The key structure-property relationships, donor-acceptor matching criteria and aspects of device physics are discussed. Finally, we consider the remaining challenges and promising future directions for the NFA OSCs field.

Group dynamics for the acquisition of competences in Project Management

NASA Astrophysics Data System (ADS)

Taguas, E. V.; Aguilar, M. C.; Castillo, C.; Polo, M. J.; Pérez, R.

2012-04-01

The Bologna Process promotes European citizens' employability from teaching fields in the University which implies the design of activities addressed to the development of skills for the labor market and engagement of employers. This work has been conceived for improving the formation of Engineering Project Management through group dynamics focused on: 1) the use of the creativity for solving problems; 2) promoting leadership capacities and social skills in multidisciplinary/multicultural work groups; 3) the ethical, social and environmental compromise; 4) the continuous learning. Different types of activities were designed: short activities of 15-30 minutes where fragments of books or songs are presented and discussed and long activities (2 h) where groups of students take different roles for solving common problems and situations within the Engineering Projects context. An electronic book with the content of the dynamics and the material for the students has been carried out. A sample of 20 students of Electronic Engineering degree which had participated at least in two dynamics, evaluated the utility for improving their formation in Engineering Project Management with a mark of 8.2 (scale 0-10, standard deviation equal to 0.9). On the other hand, the teachers observed how this type of work, promotes the interdisciplinary training and the acquisition of social skills, usually not-included in the objectives of the subjects.

Garlic (Allium sativum) feeding impairs Sertoli cell junctional proteins in male Wistar rat testis: microscopy study.

PubMed

Hammami, I; Nahdi, A; Atig, F; El May, A; El May, M V

2016-12-01

Sertoli cell junctions, such as adhesion junction (AJ), gap junction (GJ) and tight junction (TJ), are important for maintaining spermatogenesis. In previous studies, we showed the inhibitory effect of crude garlic (Allium sativum, As) on spermatogenesis and steroidogenesis. The aim of this work was to complete our investigation on the impact of this plant, especially on Sertoli cell junctional proteins (SCJPs). During 1 month, 24 male rats were divided into groups: group control (0% of As) and treated groups fed 5%, 10% and 15% of As. Light and electron microscopy observations were performed to localise junctional proteins: connexin-43, Zona Occluding-1 and N-cadherin (immunohistochemistry) and to describe junctions. We showed that the specific cells involved in the localisation of the SCJP were similar in both control and treated groups, but with different immunoreactivity intensity between them. The electron microscopy observation focused on TJs between Sertoli cells, constituting the blood-testis barrier, showed ultrastructural changes such as fragmentation of TJs between adjacent Sertoli cell membranes and dilatation of rough endoplasmic reticulum saccules giving an aspect of scale to these junctions. We concluded that crude garlic consumption during 1 month induces perturbations on Sertoli cell junctions. These alterations can explain apoptosis in testicular germ cells previously showed. © 2016 Blackwell Verlag GmbH.

Working group report on beam plasmas, electronic propulsion, and active experiments using beams

NASA Technical Reports Server (NTRS)

Dawson, J. M.; Eastman, T.; Gabriel, S.; Hawkins, J.; Matossian, J.; Raitt, J.; Reeves, G.; Sasaki, S.; Szuszczewicz, E.; Winkler, J. R.

1986-01-01

The JPL Workshop addressed a number of plasma issues that bear on advanced spaceborne technology for the years 2000 and beyond. Primary interest was on the permanently manned space station with a focus on identifying environmentally related issues requiring early clarification by spaceborne plasma experimentation. The Beams Working Group focused on environmentally related threats that platform operations could have on the conduct and integrity of spaceborne beam experiments and vice versa. Considerations were to include particle beams and plumes. For purposes of definition it was agreed that the term particle beams described a directed flow of charged or neutral particles allowing single-particle trajectories to represent the characteristics of the beam and its propagation. On the other hand, the word plume was adopted to describe a multidimensional flow (or expansion) of a plasma or neutral gas cloud. Within the framework of these definitions, experiment categories included: (1) Neutral- and charged-particle beam propagation, with considerations extending to high powers and currents. (2) Evolution and dynamics of naturally occurring and man-made plasma and neutral gas clouds. In both categories, scientific interest focused on interactions with the ambient geoplasma and the evolution of particle densities, energy distribution functions, waves, and fields.

Internal Medicine Resident Engagement with a Laboratory Utilization Dashboard: Mixed Methods Study.

PubMed

Kurtzman, Gregory; Dine, Jessica; Epstein, Andrew; Gitelman, Yevgenly; Leri, Damien; Patel, Miltesh S; Ryskina, Kyra

2017-09-01

The objective of this study was to measure internal medicine resident engagement with an electronic medical record-based dashboard providing feedback on their use of routine laboratory tests relative to service averages. From January 2016 to June 2016, residents were e-mailed a snapshot of their personalized dashboard, a link to the online dashboard, and text summarizing the resident and service utilization averages. We measured resident engagement using e-mail read-receipts and web-based tracking. We also conducted 3 hour-long focus groups with residents. Using grounded theory approach, the transcripts were analyzed for common themes focusing on barriers and facilitators of dashboard use. Among 80 residents, 74% opened the e-mail containing a link to the dashboard and 21% accessed the dashboard itself. We did not observe a statistically significant difference in routine laboratory ordering by dashboard use, although residents who opened the link to the dashboard ordered 0.26 fewer labs per doctor-patient-day than those who did not (95% confidence interval, -0.77 to 0.25; = 0 .31). While they raised several concerns, focus group participants had positive attitudes toward receiving individualized feedback delivered in real time. © 2017 Society of Hospital Medicine.

Laser acceleration of electrons to giga-electron-volt energies using highly charged ions.

PubMed

Hu, S X; Starace, Anthony F

2006-06-01

The recent proposal to use highly charged ions as sources of electrons for laser acceleration [S. X. Hu and A. F. Starace, Phys. Rev. Lett. 88, 245003 (2002)] is investigated here in detail by means of three-dimensional, relativistic Monte Carlo simulations for a variety of system parameters, such as laser pulse duration, ionic charge state, and laser focusing spot size. Realistic laser focusing effects--e.g., the existence of longitudinal laser field components-are taken into account. Results of spatial averaging over the laser focus are also presented. These numerical simulations show that the proposed scheme for laser acceleration of electrons from highly charged ions is feasible with current or near-future experimental conditions and that electrons with GeV energies can be obtained in such experiments.

Overcoming challenges: life with an ostomy.

PubMed

Popek, Sarah; Grant, Marcia; Gemmill, Robin; Wendel, Christopher S; Mohler, M Jane; Rawl, Susan M; Baldwin, Carol M; Ko, Clifford Y; Schmidt, C Max; Krouse, Robert S

2010-11-01

Studies have demonstrated decreased health-related quality of life in patients with stomas. Using US Department of Veterans Affairs electronic medical records, veterans with stomas were surveyed using the City of Hope Quality of Life-Ostomy questionnaire. Focus groups were conducted segregated by type of stoma (ileostomy vs colostomy) and quality-of-life score (high vs low). Qualitative analysis was performed on the basis of the City of Hope Quality of Life for Ostomates format of health-related quality of life (physical, psychological, social, and spiritual). The findings of the colostomy focus groups are reported. Two new domains emerged: colostomy specific and health care specific. The most common domains discussed were colostomy specific, psychological, and social. The most frequently discussed colostomy-specific theme was effective and ineffective solutions to colostomy care. Family and spousal relationships were the main theme from the psychological category. The predominant social issue was sexual relationships. Awareness of patients' social, psychological, and medical status allows surgeons to identify those likely to have problems and devote resources to those veterans. Published by Elsevier Inc.

[Use of electronic media in adolescence. Results of the German Health Interview and Examination Survey for Children and Adolescents (KiGGS)].

PubMed

Lampert, T; Sygusch, R; Schlack, R

2007-01-01

The use of electronic media is playing an ever greater role in adolescents' recreational behaviour. From the point of view of the health sciences, one question which arises is the extent to which intensive media use is detrimental to physical activity and adolescents' health development. The data from the German Health Interview and Examination Survey for Children and Adolescents (KiGGS), which were evaluated with a focus on 11-17-year-olds, confirm this heavy use of electronic media. However, there are distinct group-specific differences. For example, boys spend more time than girls on computers, the internet and games consoles, whereas girls more often listen to music and use their mobile phones. Watching television and videos is equally popular among girls and boys. Adolescents of low social status or a low level of school education use electronic media far more frequently and for longer times, especially television and video, games consoles and mobile phones. The same is true of boys and girls from the former states of the GDR and for boys (but not girls) with a background of migration. A connection to physical activity has been established for adolescents who spend more than five hours a day using electronic media. Moreover, this group of heavy users is more often affected by adiposity. The results of the KiGGS study, which are in line with earlier research findings, thus demonstrate that the use of electronic media is also of relevance from the point of view of public health and should be included in investigations into the health of children and adolescents.

Subsurface examination of a foliar biofilm using scanning electron- and focused-ion-beam microscopy

USDA-ARS?s Scientific Manuscript database

The dual beam scanning electron microscope, equipped with both a focused ion- and scanning electron- beam (FIB SEM) is a novel tool for the exploration of the subsurface structure of biological tissues. The FIB is capable of removing small cross sections to view the subsurface features and may be s...

Clinicians' views on displaying cost information to increase clinician cost-consciousness.

PubMed

Kruger, Jenna F; Chen, Alice Hm; Rybkin, Alex; Leeds, Kiren; Frosch, Dominick L; Goldman, Elizabeth

2014-01-01

To evaluate 1) clinician attitudes towards incorporating cost information into decision making when ordering imaging studies; and 2) clinician reactions to the display of Medicare reimbursement information for imaging studies at clinician electronic order entry. Focus group study with inductive thematic analysis. We conducted focus groups of primary care clinicians and subspecialty physicians (nephrology, pulmonary, and neurology) (N = 50) who deliver outpatient care in 12 hospital-based clinics and community health centers in an urban safety net health system. We analyzed focus group transcripts using an inductive framework to identify emergent themes and illustrative quotations. Clinicians believed that their knowledge of healthcare costs was low and wanted access to relevant cost information for reference. However, many clinicians believed it was inappropriate and unethical to consider costs in individual patient care decisions. Among clinicians' negative reactions toward displaying costs at order entry, 4 underlying themes emerged: 1) belief that ordering is already limited to clinically necessary tests; 2) importance of prioritizing responsibility to patients above that to the healthcare system; 3) concern about worsening healthcare disparities; and 4) perceived lack of accountability for healthcare costs in the system. Although clinicians want relevant cost information, many voiced concerns about displaying cost information at clinician order entry in safety net health systems. Alternative approaches to increasing cost-consciousness may be more acceptable to clinicians.

Using qualitative studies to improve the usability of an EMR.

PubMed

Rose, Alan F; Schnipper, Jeffrey L; Park, Elyse R; Poon, Eric G; Li, Qi; Middleton, Blackford

2005-02-01

The adoption of electronic medical records (EMRs) and user satisfaction are closely associated with the system's usability. To improve the usability of a results management module of a widely deployed web-based EMR, we conducted two qualitative studies that included multiple focus group and field study sessions. Qualitative research can help focus attention on user tasks and goals and identify patterns of care that can be visualized through task modeling exercises. Findings from both studies raised issues with the amount and organization of information in the display, interference with workflow patterns of primary care physicians, and the availability of visual cues and feedback. We used the findings of these studies to recommend design changes to the user interface of the results management module.

Field Manual of Wildlife Diseases

USGS Publications Warehouse

Franson, J. Christian; Friend, Milton; Gibbs, Samantha E.J.; Wild, Margaret A.

2015-01-01

We begin this new manual with introductory contextual and historical background about the convergence of wildlife disease with wildlife management as a wildlife conservation concern (section A, chap. 1). The remainder of the publication is focused on pragmatic information and considerations for addressing various aspects of wildlife disease. Section B focuses on concepts associated with disease surveillance and response to outbreaks, and section C deals with specific techniques for disease surveillance and investigation. Section D, “Diseases of Wild Birds,” and others that follow will address diseases of concern in various species groups. Electronic links facilitate timely access to a wide variety of supplemental information and processes relevant to content in this new version of the “Field Manual of Wildlife Diseases.”

Emergent Electromagnetism in Bilayer Graphene

NASA Astrophysics Data System (ADS)

Winkler, Roland; Zülicke, Ulrich

2013-03-01

Recently atomically flat layers of carbon known as graphene have become the rising star in spintronics as their electrons carry not only the ordinary spin degree of freedom, but they also have a pseudospin degree of freedom tied to the electrons' orbital motion which could enable new routes for spintronics. Here we focus on bilayer graphene (BLG). Using group theory we have established a complete description of how electrons in BLG interact with electric and magnetic fields. We show that electrons in BLG experience an unusual type of matter-field interactions where magnetic and electric fields are virtually equivalent: every coupling of an electron's degrees of freedom to a magnetic field is matched by an analogous coupling of the same degrees of freedom to an electric field. This counter-intuitive duality of matter-field interactions allows novel ways to create and manipulate spin and pseudo-spin polarizations via external fields that are not available in other materials. See arXiv:1206.4761. This work was supported by Marsden Fund contract no. VUW0719, administered by the Royal Society of New Zealand. Work at Argonne was supported by DOE BES under Contract No. DE-AC02-06CH11357.

One of several ‘toys’ for smoking: young adult experiences with electronic cigarettes in New York City

PubMed Central

McDonald, Emily Anne; Ling, Pamela M.

2015-01-01

Objective This qualitative research explores the use of electronic cigarettes and other similar ‘vapor’ delivery devices among young adults in New York City. Methods We employed 17 focus groups followed by 12 semistructured interviews to understand the beliefs, opinions and practices related to the use of electronic cigarettes among young adult smokers (N=87). Results Participants were mainly daily (52%) and non-daily (41%) smokers. While experimentation with electronic cigarette devices was frequently reported, participants related an overall lack of information about the devices and what they did know often reflected messages in e-cigarette marketing campaigns. Participants also used their own bodily sensations as a way to gauge potential risks and benefits of the products. Finally, young adults, steeped in a culture of personal technologies, perceived e-cigarettes as one more ‘toy’ among other technologies integrated into their everyday lives. Discussion E-cigarettes were also frequently used with other tobacco products, including conventional cigarettes. Our research indicates that public health campaigns may be needed to counter current industry marketing and inform the public that electronic cigarettes are currently unregulated, understudied and contain toxicants and carcinogens. PMID:25564287

Computational Nanotechnology of Materials, Electronics and Machines: Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Srivastava, Deepak

2001-01-01

This report presents the goals and research of the Integrated Product Team (IPT) on Devices and Nanotechnology. NASA's needs for this technology are discussed and then related to the research focus of the team. The two areas of focus for technique development are: 1) large scale classical molecular dynamics on a shared memory architecture machine; and 2) quantum molecular dynamics methodology. The areas of focus for research are: 1) nanomechanics/materials; 2) carbon based electronics; 3) BxCyNz composite nanotubes and junctions; 4) nano mechano-electronics; and 5) nano mechano-chemistry.

Electrostatically focused addressable field emission array chips (AFEA's) for high-speed massively parallel maskless digital E-beam direct write lithography and scanning electron microscopy

DOEpatents

Thomas, Clarence E.; Baylor, Larry R.; Voelkl, Edgar; Simpson, Michael L.; Paulus, Michael J.; Lowndes, Douglas H.; Whealton, John H.; Whitson, John C.; Wilgen, John B.

2002-12-24

Systems and methods are described for addressable field emission array (AFEA) chips. A method of operating an addressable field-emission array, includes: generating a plurality of electron beams from a pluralitly of emitters that compose the addressable field-emission array; and focusing at least one of the plurality of electron beams with an on-chip electrostatic focusing stack. The systems and methods provide advantages including the avoidance of space-charge blow-up.

An Electronic Health Record Data-driven Model for Identifying Older Adults at Risk of Unintentional Falls

PubMed Central

Baus, Adam; Coben, Jeffrey; Zullig, Keith; Pollard, Cecil; Mullett, Charles; Taylor, Henry; Cochran, Jill; Jarrett, Traci; Long, Dustin

2017-01-01

Screening for risk of unintentional falls remains low in the primary care setting because of the time constraints of brief office visits. National studies suggest that physicians caring for older adults provide recommended fall risk screening only 30 to 37 percent of the time. Given prior success in developing methods for repurposing electronic health record data for the identification of fall risk, this study involves building a model in which electronic health record data could be applied for use in clinical decision support to bolster screening by proactively identifying patients for whom screening would be beneficial and targeting efforts specifically to those patients. The final model, consisting of priority and extended measures, demonstrates moderate discriminatory power, indicating that it could prove useful in a clinical setting for identifying patients at risk of falls. Focus group discussions reveal important contextual issues involving the use of fall-related data and provide direction for the development of health systems–level innovations for the use of electronic health record data for fall risk identification. PMID:29118679

Using Focus Group Interviews to Analyze the Behavior of Users of New Types of Tobacco Products.

PubMed

Kim, Jinyoung; Lee, Sungkyu

2017-09-01

To characterize the usage patterns of new types of tobacco products (NTTPs) to develop effective strategies for the regulation of NTTPs in Korea. We conducted focus group interviews to identify the NTTP usage patterns of research subjects. The NTTPs were limited to electronic cigarettes (e-cigarettes), waterpipe tobacco, and rolling tobacco. We categorized 30 research subjects into 4 groups. The e-cigarette group was divided into adult and adolescent groups. Each group contained 7-8 subjects. An interview lasting approximately 2 hours was conducted with each group. Ninety percent of NTTP users used an NTTP in combination with conventional cigarettes. Subjects mostly bought NTTPs online, unlike how they bought cigarettes. Additionally, a great deal of information, such as how to use NTTPs and descriptions of NTTP products, was exchanged through online or offline societies. The primary reason why the subjects used NTTPs was that NTTPs offer a greater range of flavors and aromas than cigarettes. Moreover, NTTPs were felt to be less repulsive than cigarettes. NTTPs were not used as a cigarette substitute; rather, they were mostly used in places and situations where traditional cigarette smoking was not allowed. Based on the results of this study, the government should conduct studies on the effects of the combined use of NTTPs and cigarettes on the human body, obtain and provide accurate data regarding NTTP use, and develop and implement polices to ban NTTP advertising, which may arouse adolescents' curiosity, and the addition of flavoring substances to tobacco products.

Comparing Mobile Health Strategies to Improve Medication Adherence for Veterans With Coronary Heart Disease (Mobile4Meds): Protocol for a Mixed-Methods Study.

PubMed

Park, Linda G; Collins, Eileen G; Shim, Janet K; Whooley, Mary A

2017-07-18

Adherence to antiplatelet medications is critical to prevent life threatening complications (ie, stent thrombosis) after percutaneous coronary interventions (PCIs), yet rates of nonadherence range from 21-57% by 12 months. Mobile interventions delivered via text messaging or mobile apps represent a practical and inexpensive strategy to promote behavior change and enhance medication adherence. The Mobile4Meds study seeks to determine whether text messaging or a mobile app, compared with an educational website control provided to all Veterans, can improve adherence to antiplatelet therapy among patients following acute coronary syndrome (ACS) or PCI. The three aims of the study are to: (1) determine preferences for content and frequency of text messaging to promote medication adherence through focus groups; (2) identify the most patient-centered app that promotes adherence, through a content analysis of all commercially available apps for medication adherence and focus groups centered on usability; and (3) compare adherence to antiplatelet medications in Veterans after ACS/PCI via a randomized clinical trial (RCT). We will utilize a mixed-methods design that uses focus groups to achieve the first and second aims (N=32). Patients will be followed for 12 months after being randomly assigned to one of three arms: (1) customized text messaging, (2) mobile app, or (3) website-control groups (N=225). Medication adherence will be measured with electronic monitoring devices, pharmacy records, and self-reports. Enrollment for the focus groups is currently in progress. We expect to enroll patients for the RCT in the beginning of 2018. Determining the efficacy of mobile technology using a Veteran-designed protocol to promote medication adherence will have a significant impact on Veteran health and public health, particularly for individuals with chronic diseases that require strict medication adherence. ClinicalTrials.gov NCT03022669. ©Linda G Park, Eileen G Collins, Janet K Shim, Mary A Whooley. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 18.07.2017.

Parental perceptions of school-based influenza immunisation in Ontario, Canada: a qualitative study.

PubMed

MacDougall, Donna; Crowe, Lois; Pereira, Jennifer A; Kwong, Jeffrey C; Quach, Susan; Wormsbecker, Anne E; Ramsay, Hilary; Salvadori, Marina I; Russell, Margaret L

2014-06-05

To understand the perspectives of Ontario parents regarding the advantages and disadvantages of adding influenza immunisation to the currently existing Ontario school-based immunisation programmes. Descriptive qualitative study. Parents of school-age children in Ontario, Canada, who were recruited using a variety of electronic strategies (social media, emails and media releases), and identified as eligible (Ontario resident, parent of one or more school-age children, able to read/write English) on the basis of a screening questionnaire. We used stratified purposeful sampling to obtain maximum variation in two groups: parents who had ever immunised at least one child against influenza or who had never done so. We conducted focus groups (teleconference or internet forum) and individual interviews to collect data. Thematic analysis was used to analyse the data. Ontario, Canada. Of the 55 participants, 16 took part in four teleconference focus groups, 35 in 6 internet forum focus groups and four in individual interviews conducted between October 2012 and February 2013. Participants who stated that a school-based influenza immunisation programme would be worthwhile for their child valued its convenience and its potential to reduce influenza transmission without interfering with the family routine. However, most thought that for a programme to be acceptable, it would need to be well designed and voluntary, with adequate parental control and transparent communication between the key stakeholder groups of public health, schools and parents. These results will benefit decision-makers in the public health and education sectors as they consider the advantages and disadvantages of immunising children in schools as part of a system-wide influenza prevention approach. Further research is needed to assess the perceptions of school board and public health stakeholders. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Electron Acceleration by Beating of Two Intense Cross-Focused Hollow Gaussian Laser Beams in Plasma

NASA Astrophysics Data System (ADS)

Mahmoud, Saleh T.; Gauniyal, Rakhi; Ahmad, Nafis; Rawat, Priyanka; Purohit, Gunjan

2018-01-01

This paper presents propagation of two cross-focused intense hollow Gaussian laser beams (HGBs) in collisionless plasma and its effect on the generation of electron plasma wave (EPW) and electron acceleration process, when relativistic and ponderomotive nonlinearities are simultaneously operative. Nonlinear differential equations have been set up for beamwidth of laser beams, power of generated EPW, and energy gain by electrons using WKB and paraxial approximations. Numerical simulations have been carried out to investigate the effect of typical laser-plasma parameters on the focusing of laser beams in plasmas and further its effect on power of excited EPW and acceleration of electrons. It is observed that focusing of two laser beams in plasma increases for higher order of hollow Gaussian beams, which significantly enhanced the power of generated EPW and energy gain. The amplitude of EPW and energy gain by electrons is found to enhance with an increase in the intensity of laser beams and plasma density. This study will be useful to plasma beat wave accelerator and in other applications requiring multiple laser beams. Supported by United Arab Emirates University for Financial under Grant No. UPAR (2014)-31S164

Creating and Steering Highly Directional Electron Beams in Graphene.

PubMed

Liu, Ming-Hao; Gorini, Cosimo; Richter, Klaus

2017-02-10

We put forward a concept to create highly collimated, nondispersive electron beams in pseudorelativistic Dirac materials such as graphene or topological insulator surfaces. Combining negative refraction and Klein collimation at a parabolic pn junction, the proposed lens generates beams, as narrow as the focal length, that stay focused over scales of several microns and can be steered by a magnetic field without losing collimation. We demonstrate the lens capabilities by applying it to two paradigmatic settings of graphene electron optics: We propose a setup for observing high-resolution angle-dependent Klein tunneling, and, exploiting the intimate quantum-to-classical correspondence of these focused electron waves, we consider high-fidelity transverse magnetic focusing accompanied by simulations for current mapping through scanning gate microscopy. Our proposal opens up new perspectives for next-generation graphene electron optics experiments.

High-gain thompson-scattering X-ray free-electron laser by time-synchronic laterally tilted optical wave

DOEpatents

Chang, Chao; Tang, Chuanxiang; Wu, Juhao

2017-05-09

An improved optical undulator for use in connection with free electron radiation sources is provided. A tilt is introduced between phase fronts of an optical pulse and the pulse front. Two such pulses in a counter-propagating geometry overlap to create a standing wave pattern. A line focus is used to increase the intensity of this standing wave pattern. An electron beam is aligned with the line focus. The relative angle between pulse front and phase fronts is adjusted such that there is a velocity match between the electron beam and the overlapping optical pulses along the line focus. This allows one to provide a long interaction length using short and intense optical pulses, thereby greatly increasing the radiation output from the electron beam as it passes through this optical undulator.

Creating and Steering Highly Directional Electron Beams in Graphene

NASA Astrophysics Data System (ADS)

Liu, Ming-Hao; Gorini, Cosimo; Richter, Klaus

2017-02-01

We put forward a concept to create highly collimated, nondispersive electron beams in pseudorelativistic Dirac materials such as graphene or topological insulator surfaces. Combining negative refraction and Klein collimation at a parabolic p n junction, the proposed lens generates beams, as narrow as the focal length, that stay focused over scales of several microns and can be steered by a magnetic field without losing collimation. We demonstrate the lens capabilities by applying it to two paradigmatic settings of graphene electron optics: We propose a setup for observing high-resolution angle-dependent Klein tunneling, and, exploiting the intimate quantum-to-classical correspondence of these focused electron waves, we consider high-fidelity transverse magnetic focusing accompanied by simulations for current mapping through scanning gate microscopy. Our proposal opens up new perspectives for next-generation graphene electron optics experiments.

Laser acceleration of electrons to giga-electron-volt energies using highly charged ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, S. X.; Starace, Anthony F.

2006-06-15

The recent proposal to use highly charged ions as sources of electrons for laser acceleration [S. X. Hu and A. F. Starace, Phys. Rev. Lett. 88, 245003 (2002)] is investigated here in detail by means of three-dimensional, relativistic Monte Carlo simulations for a variety of system parameters, such as laser pulse duration, ionic charge state, and laser focusing spot size. Realistic laser focusing effects--e.g., the existence of longitudinal laser field components--are taken into account. Results of spatial averaging over the laser focus are also presented. These numerical simulations show that the proposed scheme for laser acceleration of electrons from highlymore » charged ions is feasible with current or near-future experimental conditions and that electrons with GeV energies can be obtained in such experiments.« less

Local electric field direct writing – Electron-beam lithography and mechanism

DOE PAGES

Jiang, Nan; Su, Dong; Spence, John C. H.

2017-08-24

Local electric field induced by a focused electron probe in silicate glass thin films is evaluated in this paper by the migration of cations. Extremely strong local electric fields can be obtained by the focused electron probe from a scanning transmission electron microscope. As a result, collective atomic displacements occur. This newly revised mechanism provides an efficient tool to write patterned nanostructures directly, and thus overcome the low efficiency of the conventional electron-beam lithography. Applying this technique to silicate glass thin films, as an example, a grid of rods of nanometer dimension can be efficiently produced by rapidly scanning amore » focused electron probe. This nanopatterning is achieved through swift phase separation in the sample, without any post-development processes. The controlled phase separation is induced by massive displacements of cations (glass modifiers) within the glass-former network, driven by the strong local electric fields. The electric field is induced by accumulated charge within the electron probed region, which is generated by the excitation of atomic electrons by the incident electron. Throughput is much improved compared to other scanning probe techniques. Finally, the half-pitch spatial resolution of nanostructure in this particular specimen is 2.5 nm.« less

Local electric field direct writing – Electron-beam lithography and mechanism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Nan; Su, Dong; Spence, John C. H.

Local electric field induced by a focused electron probe in silicate glass thin films is evaluated in this paper by the migration of cations. Extremely strong local electric fields can be obtained by the focused electron probe from a scanning transmission electron microscope. As a result, collective atomic displacements occur. This newly revised mechanism provides an efficient tool to write patterned nanostructures directly, and thus overcome the low efficiency of the conventional electron-beam lithography. Applying this technique to silicate glass thin films, as an example, a grid of rods of nanometer dimension can be efficiently produced by rapidly scanning amore » focused electron probe. This nanopatterning is achieved through swift phase separation in the sample, without any post-development processes. The controlled phase separation is induced by massive displacements of cations (glass modifiers) within the glass-former network, driven by the strong local electric fields. The electric field is induced by accumulated charge within the electron probed region, which is generated by the excitation of atomic electrons by the incident electron. Throughput is much improved compared to other scanning probe techniques. Finally, the half-pitch spatial resolution of nanostructure in this particular specimen is 2.5 nm.« less

Controlling Electron Backstreaming Phenomena Through the Use of a Transverse Magnetic Field

NASA Technical Reports Server (NTRS)

Foster, John E.; Patterson, Michael J.

2002-01-01

DEEP-SPACE mission propulsion requirements can be satisfied by the use of high specific impulse systems such as ion thrusters. For such missions. however. the ion thruster will be required to provide thrust for long periods of time. To meet the long operation time and high-propellant throughput requirements, thruster lifetime must be increased. In general, potential ion thruster failure mechanisms associated with long-duration thrusting can be grouped into four areas: (1) ion optics failure; (2) discharge cathode failure; (3) neutralizer failure; and (4) electron backstreaming caused by accelerator grid aperture enlargement brought on by accelerator grid erosion. The work presented here focuses on electron backstreaming. which occurs when the potential at the center of an accelerator grid aperture is insufficient to prevent the backflow of electrons into the ion thruster. The likelihood of this occurring depends on ion source operation time. plasma density, and grid voltages, as accelerator grid apertures enlarge as a result of erosion. Electrons that enter the gap between the high-voltage screen and accelerator grids are accelerated to the energies approximately equal to the beam voltage. This energetic electron beam (typically higher than 1 kV) can damage not only the ion source discharge cathode assembly. but also any of the discharge surfaces upstream of the ion acceleration optics that the electrons happen to impact. Indeed. past backstreaming studies have shown that near the backstreaming limit, which corresponds to the absolute value of the accelerator grid voltage below which electrons can backflow into the thruster, there is a rather sharp rise in temperature at structures such as the cathode keeper electrode. In this respect operation at accelerator grid voltages near the backstreaming limit is avoided. Generally speaking, electron backstreaming is prevented by operating the accelerator grid at a sufficiently negative voltage to ensure a sufficiently negative aperture center potential. This approach can provide the necessary margin assuming an expected aperture enlargement. Operation at very negative accelerator grid voltages, however, enhances ion charge-exchange and direct impingement erosion of the accelerator grid. The focus of the work presented here is the mitigation of electron backstreaming by the use of a magnetic field. The presence of a magnetic field oriented perpendicular to the thruster axis can significantly decrease the magnitude of the backflowing electron current by significantly reducing the electron diffusion coefficient. Negative ion sources utilize this principle to reduce the fraction of electrons in the negative ion beam. The focus of these efforts has been on the attenuation of electron current diffusing from the discharge plasma into the negative ion extraction optics by placing the transverse magnetic field upstream of the extraction electrodes. In contrast. in the case of positive ion sources such as ion thrusters, the approach taken in the work presented here is to apply the transverse field downstream of the ion extraction system so as to prevent electrons from flowing back into the source. It was found in the work presented here that the magnetic field also reduces the absolute value of the electron backstreaming limit voltage. In this respect. the applied transverse magnetic field provides two mechanisms for electron backstreaming mitigation: (1) electron current attenuation and (2) backstreaming limit voltage shift. Such a shift to less negative voltages can lead to reduced accelerator grid erosion rates.

A study on the stability and green synthesis of silver nanoparticles using Ziziphora tenuior (Zt) extract at room temperature.

PubMed

Sadeghi, Babak; Gholamhoseinpoor, F

2015-01-05

Biomolecules present in plant extracts can be used to reduce metal ions to nanoparticles in a single-step green synthesis process. This biogenic reduction of metal ion to base metal is quite rapid, readily conducted at room temperature and pressure, and easily scaled up. Mediated Synthesis by plant extracts is environmentally benign. The involved reducing agents include the various water soluble plant metabolites (e.g. alkaloids, phenolic compounds, terpenoids) and co-enzymes. Silver (Ag) nanoparticles have the particular focus of plant-based syntheses. Extracts of a diverse range of Ziziphora tenuior (Zt) have been successfully used in making nanoparticles. The aim of this study was to investigate the antioxidant properties of this plant and its ability to synthesize silver nanoparticles. Z.tenuior leaves were used to prepare the aqueous extract for this study. Silver nanoparticles were characterized with different techniques such as UV-vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Transmission electron microscopy experiments showed that these nanoparticles are spherical and uniformly distributed and its size is from 8 to 40 nm. FT-IR spectroscopy revealed that silver nanoparticles were functionalized with biomolecules that have primary amine group (NH₂), carbonyl group, -OH groups and other stabilizing functional groups. X-ray diffraction pattern showed high purity and face centered cubic structure of silver nanoparticles with size of 38 nm. In addition to plant extracts, live plants can be used for the synthesis. Here were view the methods of making nanoparticles using plant extracts. The scanning electron microscopy (SEM) implies the right of forming silver nanoparticles. The results of TEM, SEM, FT-IR, UV-VIS and XRD confirm that the leaves extract of Zt can synthesis silver nanoparticles. Copyright © 2014 Elsevier B.V. All rights reserved.

Reducing electronic media use in 2-3 year-old children: feasibility and efficacy of the Family@play pilot randomised controlled trial.

PubMed

Hinkley, Trina; Cliff, Dylan P; Okely, Anthony D

2015-08-14

Participation in electronic media use among 2-3 year olds is high and associated with adverse health and developmental outcomes. This study sought to test the feasibility and potential efficacy of a family-based program to decrease electronic media (EM) use in 2-3-year-old children. Family@play was a six-session pilot randomised controlled trial delivered to parents of 2-3 year-old children from August to September 2012 in a community environment in the Illawarra region of New South Wales, Australia. Development of program content was guided by Social Cognitive and Family Systems Theories. The primary outcome was children's electronic media use. Secondary outcomes included children's time in sitting, standing and stepping. Data collectors were blinded to group allocation. Parents completed comprehensive process evaluation measures and participated in focus group discussions following completion of the program. Regression analyses were undertaken and effect sizes calculated using principles of intention to treat. Twenty-two participants (n = 12 intervention; n = 10 control) provided complete baseline data; complete data from 16 participants (n = 6 intervention; n = 10 control) were available post-intervention. Process evaluation results were high, showing the acceptability of the program. Compared with children in the control group, there were greater decreases in total EM use among children in the intervention group (adjusted difference [95 % CI] = -31.2 mins/day [-71.0-8.6] Cohen's d = 0.70). Differences for other outcomes were in the hypothesised direction and ranged from small for postural (sitting, standing, stepping) outcomes to moderate to large for individual electronic media (e.g. TV viewing, DVD/video viewing). This is the first family-based study to engage families of 2-3 year old children outside the United States and target multiple EM behaviours. Family@play was shown to be a feasible and acceptable intervention to deliver to families of 2-3 year old children. Potential efficacy is evident from moderate to large effect sizes. A larger trial is warranted to test the efficacy of the program. Australian New Zealand Clinical Trials Registry ( ACTRN12612000470897 ).

How Does the Electron Dynamics Affect the Reconnection Rate in a Typical Reconnection Layer?

NASA Technical Reports Server (NTRS)

Hesse, Michael

2009-01-01

The question of whether the microscale controls the macroscale or vice-versa remains one of the most challenging problems in plasmas. A particular topic of interest within this context is collisionless magnetic reconnection, where both points of views are espoused by different groups of researchers. This presentation will focus on this topic. We will begin by analyzing the properties of electron diffusion region dynamics both for guide field and anti-parallel reconnection, and how they can be scaled to different inflow conditions. As a next step, we will study typical temporal variations of the microscopic dynamics with the objective of understanding the potential for secular changes to the macroscopic system. The research will be based on a combination of analytical theory and numerical modeling.

Characterization of Plasma Discharges in a High-Field Magnetic Tandem Mirror

NASA Technical Reports Server (NTRS)

Chang-Diaz, Franklin R.

1998-01-01

High density magnetized plasma discharges in open-ended geometries, like Tandem Mirrors, have a variety of space applications. Chief among them is the production of variable Specific Impulse (I(sub sp)) and variable thrust in a magnetic nozzle. Our research group is pursuing the experimental characterization of such discharges in our high-field facility located at the Advanced Space Propulsion Laboratory (ASPL). These studies focus on identifying plasma stability criteria as functions of density, temperature and magnetic field strength. Plasma heating is accomplished by both Electron and Ion Cyclotron Resonance (ECR and ICR) at frequencies of 2-3 Ghz and 1-30 Mhz respectively, for both Hydrogen and Helium. Electron density and temperature has measured by movable Langmuir probes. Macroscopic plasma stability is being investigated in ongoing research.

Ponderomotive phase plate for transmission electron microscopes

DOEpatents

Reed, Bryan W [Livermore, CA

2012-07-10

A ponderomotive phase plate system and method for controllably producing highly tunable phase contrast transfer functions in a transmission electron microscope (TEM) for high resolution and biological phase contrast imaging. The system and method includes a laser source and a beam transport system to produce a focused laser crossover as a phase plate, so that a ponderomotive potential of the focused laser crossover produces a scattering-angle-dependent phase shift in the electrons of the post-sample electron beam corresponding to a desired phase contrast transfer function.

Tips and Traps: Lessons From Codesigning a Clinician E-Monitoring Tool for Computerized Cognitive Behavioral Therapy

PubMed Central

Hawken, Susan J; Stasiak, Karolina; Lucassen, Mathijs FG; Fleming, Theresa; Shepherd, Matthew; Greenwood, Andrea; Osborne, Raechel; Merry, Sally N

2017-01-01

Background Computerized cognitive behavioral therapy (cCBT) is an acceptable and promising treatment modality for adolescents with mild-to-moderate depression. Many cCBT programs are standalone packages with no way for clinicians to monitor progress or outcomes. We sought to develop an electronic monitoring (e-monitoring) tool in consultation with clinicians and adolescents to allow clinicians to monitor mood, risk, and treatment adherence of adolescents completing a cCBT program called SPARX (Smart, Positive, Active, Realistic, X-factor thoughts). Objective The objectives of our study were as follows: (1) assess clinicians’ and adolescents’ views on using an e-monitoring tool and to use this information to help shape the development of the tool and (2) assess clinician experiences with a fully developed version of the tool that was implemented in their clinical service. Methods A descriptive qualitative study using semistructured focus groups was conducted in New Zealand. In total, 7 focus groups included clinicians (n=50) who worked in primary care, and 3 separate groups included adolescents (n=29). Clinicians were general practitioners (GPs), school guidance counselors, clinical psychologists, youth workers, and nurses. Adolescents were recruited from health services and a high school. Focus groups were run to enable feedback at 3 phases that corresponded to the consultation, development, and postimplementation stages. Thematic analysis was applied to transcribed responses. Results Focus groups during the consultation and development phases revealed the need for a simple e-monitoring registration process with guides for end users. Common concerns were raised in relation to clinical burden, monitoring risk (and effects on the therapeutic relationship), alongside confidentiality or privacy and technical considerations. Adolescents did not want to use their social media login credentials for e-monitoring, as they valued their privacy. However, adolescents did want information on seeking help and personalized monitoring and communication arrangements. Postimplementation, clinicians who had used the tool in practice revealed no adverse impact on the therapeutic relationship, and adolescents were not concerned about being e-monitored. Clinicians did need additional time to monitor adolescents, and the e-monitoring tool was used in a different way than was originally anticipated. Also, it was suggested that the registration process could be further streamlined and integrated with existing clinical data management systems, and the use of clinician alerts could be expanded beyond the scope of simply flagging adolescents of concern. Conclusions An e-monitoring tool was developed in consultation with clinicians and adolescents. However, the study revealed the complexity of implementing the tool in clinical practice. Of salience were privacy, parallel monitoring systems, integration with existing electronic medical record systems, customization of the e-monitor, and preagreed monitoring arrangements between clinicians and adolescents. PMID:28077345

Identifying and Understanding the Gaps in Care Experienced by Adolescent and Young Adult Cancer Patients at the University of Iowa Hospitals and Clinics.

PubMed

Mobley, Erin M; Foster, Kristin J; Terry, William W

2018-06-20

In an effort to counteract the differences in improvement in survival rates of adolescents and young adults (AYA), compared to other age groups with cancer, the University of Iowa Hospitals and Clinics established an AYA cancer program. This study was conducted to gather feedback from AYAs in an effort to generate actionable data for program development. The target population included patients aged 13-31 treated for malignancy in one of the following disease sites: central nervous system, leukemia, lymphoma, neuroendocrine, sarcoma, and thyroid. A series of four focus groups was held to identify and describe gaps in care and provide suggestions for program development. A convergent parallel mixed-methods design was used. Qualitative data were derived from focus group discussion and free-response survey questions, while quantitative data were derived from objective survey questions and electronic medical record data. Across the four focus groups, 24 different AYAs participated, ranging from 8 to 19 individuals per session. Topics discussed included the following: communication, treatment experience, and overall AYA program; finances, work and school, and late effects; relationships, emotions, and spirituality; and body image, infertility, sexuality, risky behavior, and suicide. The results of the analyses corroborated what makes AYAs different from other age groups. The primary theme identified was the unique relationships of AYAs, which can be thought of along a continuum. Information obtained from these analyses has been used to inform specific projects within the development of the AYA program to address patient-identified gaps. For AYAs, the importance of relationships along a continuum should be considered when developing an AYA program, in addition to potential policy or health service research utilization in the future.

Parental perceptions of school-based influenza immunisation in Ontario, Canada: a qualitative study

PubMed Central

MacDougall, Donna; Crowe, Lois; Pereira, Jennifer A; Kwong, Jeffrey C; Quach, Susan; Wormsbecker, Anne E; Ramsay, Hilary; Salvadori, Marina I; Russell, Margaret L

2014-01-01

Objective To understand the perspectives of Ontario parents regarding the advantages and disadvantages of adding influenza immunisation to the currently existing Ontario school-based immunisation programmes. Design Descriptive qualitative study. Participants Parents of school-age children in Ontario, Canada, who were recruited using a variety of electronic strategies (social media, emails and media releases), and identified as eligible (Ontario resident, parent of one or more school-age children, able to read/write English) on the basis of a screening questionnaire. We used stratified purposeful sampling to obtain maximum variation in two groups: parents who had ever immunised at least one child against influenza or who had never done so. We conducted focus groups (teleconference or internet forum) and individual interviews to collect data. Thematic analysis was used to analyse the data. Setting Ontario, Canada. Results Of the 55 participants, 16 took part in four teleconference focus groups, 35 in 6 internet forum focus groups and four in individual interviews conducted between October 2012 and February 2013. Participants who stated that a school-based influenza immunisation programme would be worthwhile for their child valued its convenience and its potential to reduce influenza transmission without interfering with the family routine. However, most thought that for a programme to be acceptable, it would need to be well designed and voluntary, with adequate parental control and transparent communication between the key stakeholder groups of public health, schools and parents. Conclusions These results will benefit decision-makers in the public health and education sectors as they consider the advantages and disadvantages of immunising children in schools as part of a system-wide influenza prevention approach. Further research is needed to assess the perceptions of school board and public health stakeholders. PMID:24902736

Complexities of Focused Ion Beam Preparation of Electron-Transparent Sections for Meteorite Studies

NASA Astrophysics Data System (ADS)

Ishii, H. A.; Bradley, J. P.; Teslich, N.

2012-09-01

Focused Ion Beam is increasingly used to prepare site-specific, electron-transparent sections for meteorite micro-texture and -chemistry studies. We discuss technical challenges and frequently-overlooked FIB artifacts relevant to meteorite analyses.

Adolescents' preferences for social support for healthful eating and physical activity.

PubMed

Biggs, Bridget K; Lebow, Jocelyn; Smith, Christina M; Harper, Kelly L; Patten, Christi A; Sim, Leslie A; Kumar, Seema

2014-10-01

This study explored adolescents' views on the sources and types of social support they would prefer when trying to eat more healthfully and be more active, as well as their opinions regarding means of enhancing social support in interventions. A total of 28 adolescents (14 males, 14 females) ages 13 to 18 years participated in 4 focus groups that were stratified by gender and age to enhance participation. As expected, participants most readily named parents and friends as important sources of support and described wanting instrumental and emotional support from parents, companionship and emotional support from friends, and informational support from professionals. The focus groups revealed rich information regarding parents' and peers' behaviors that are and are not received as emotionally supportive, the helpfulness of parents' concurrent changes in lifestyle, and the importance of parents not ignoring or colluding with unhealthful behavior. Most participants expressed a need for frequent contact and a trusting relationship with professionals. Opinions were mixed regarding inclusion of others in appointments, use of electronic communications and social media, and group treatment formats. Results have implications for enhancing social support in behavioral weight management interventions that are developmentally relevant for adolescents.

Generation of terahertz radiation by intense hollow Gaussian laser beam in magnetised plasma under relativistic-ponderomotive regime

NASA Astrophysics Data System (ADS)

Rawat, Priyanka; Rawat, Vinod; Gaur, Bineet; Purohit, Gunjan

2017-07-01

This paper explores the self-focusing of hollow Gaussian laser beam (HGLB) in collisionless magnetized plasma and its effect on the generation of THz radiation in the presence of relativistic-ponderomotive nonlinearity. The relativistic change of electron mass and electron density perturbation due to the ponderomotive force leads to self-focusing of the laser beam in plasma. Nonlinear coupling between the intense HGLB and electron plasma wave leads to generation of THz radiation in plasma. Resonant excitation of THz radiation at different frequencies of laser and electron plasma wave satisfies proper phase matching conditions. Appropriate expressions for the beam width parameter of the laser beam and the electric vector of the THz wave have been evaluated under the paraxial-ray and Wentzel-Kramers Brillouin approximations. It is found that the yield of THz amplitude depends on the focusing behaviour of laser beam, magnetic field, and background electron density. Numerical simulations have been carried out to investigate the effect of laser and plasma parameters on self-focusing of the laser beam and further its effect on the efficiency of the generated THz radiation.

Project success: A methodological and evaluative case study of the early alert program interventions

NASA Astrophysics Data System (ADS)

Larkins, Randy James

The purpose of this study was twofold. First, to methodologically examine the use of three types of focus groups 1), traditional face-to face, 2), online video and audio, and 3) online text only. Second, to examine the impact of academic intervention attempts offered by university and department support services. Methodologically, the three types of focus groups were compared in terms of ease of use, comfort, richness of data and ethical considerations. Contextually, support services for a general chemistry course taken primarily by new students were examined using an evaluation method involving effort, monitoring, process, component and treatment specification types of implementation. For this research, fourteen students enrolled in the general chemistry course at Rocky Mountain University in fall term 2014 participated in one of the three types of focus groups to discuss support services for the course. Since the increase of technological advances in the late twentieth century, the use of electronic focus groups has been viewed as a viable alternative to traditional in-person meetings. However, different methods within a methodology might produce different results for both students and researchers. This study inspected differences in ease of use for participants and the researcher, comfort in terms of using technology and in discussing academic issues and support services, richness of the data, and ethical issues surrounding privacy and confidentiality. For this case study, methodological findings were that in-person groups still had relevance in this age of advanced technology. Audio-video groups were more limited than in-person groups in terms of interaction and administration, while text-only groups were easiest to transcribe, but seemed to be the most limited in terms of all other aspects of the research. Finally, ethical concerns were not considered important by members in any group; therefore, it is incumbent on the researcher to provide the best ethical environment possible in whatever form the focus group takes place. Suggestions for future research include recruiting participants from online classes and attempting to engage more disenfranchised students in other studies. Similar to new types of focus group methods due to technological advances, academic interventions for students facing failing grades are also increasing due to the internet and new methods of service delivery. The contextual aspect of this research involved asking students to participate in an initial focus group session, four weeks of email updates, and a final focus group session in which students participated in the same group as the initial session. The purpose of the focus groups was to evaluate whether or not the universities' attempts to help students succeed in a course known in the past for high failure rates through a program known as the Early Alert Project was succeeding. Interview data were analyzed using thematic coding to evaluate available support services using a comprehensive implementation evaluation model which included effort, monitoring, process, components; and treatment specification. The primary findings were although students believed the university was trying to help them succeed, Early Alert Project efforts were adversely received. In addition, participants felt that although there were enough support services to help them succeed in the course, the components of the support system were confusing and not organized in any systematic manner. Suggestions for further research included researching delivery of this type of communication that might be more amenable to the students who received it and applying this research to other courses to examine whether the same results occur. Finally, implications of the use of traditional methods and academic support services are discussed in addition to the effect of the research itself upon its participants.

Particle dynamics and pair production in tightly focused standing wave

NASA Astrophysics Data System (ADS)

Jirka, M.; Klimo, O.; Vranić, M.; Weber, S.; Korn, G.

2017-05-01

With the advent of 10 PW laser facilities, new regimes of laser-matter interaction are opening since effects of quantum electrodynamics, such as electron-positron pair production and cascade development, start to be important. The dynamics of light charged particles, such as electrons and positrons, is affected by the radiation reaction force. This effect can strongly influence the interaction of intense laser pulses with matter since it lowers the energy of emitting particles and transforms their energy to the gamma radiation. Consequently, electron-positron pairs can be generated via Breit-Wheeler process. To study this new regime of interaction, numerical simulations are required. With their help it is possible to predict and study quantum effects which may occur in future experiments at modern laser facilities. In this work we present results of electron interaction with an intense standing wave formed by two colliding laser pulses. Due to the necessity to achieve ultra intense laser field, the laser beam has to be focused to a μm-diameter spot. Since the paraxial approximation is not valid for tight focusing, the appropriate model describing the tightly focused laser beam has to be employed. In tightly focused laser beam the longitudinal component of the electromagnetic field becomes significant and together with the ponderomotive force they affect the dynamics of interacting electrons and also newly generated Breit-Wheeler electron-positron pairs. Using the Particle-In-Cell code we study electron dynamics, gamma radiation and pair production in such a configuration for linear polarization and different types of targets.

Cosensitized Porphyrin System for High-Performance Solar Cells with TOF-SIMS Analysis.

PubMed

Wu, Wenjun; Xiang, Huaide; Fan, Wei; Wang, Jinglin; Wang, Haifeng; Hua, Xin; Wang, Zhaohui; Long, Yitao; Tian, He; Zhu, Wei-Hong

2017-05-17

To date, development of organic sensitizers has been predominately focused on light harvesting, highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels, and the electron transferring process. In contrast, their adsorption mode as well as the dynamic loading behavior onto nanoporous TiO 2 is rarely considered. Herein, we have employed the time-of-flight secondary ion mass spectrometry (TOF-SIMS) to gain insight into the competitive dye adsorption mode and kinetics in the cosensitized porphyrin system. Using novel porphyrin dye FW-1 and D-A-π-A featured dye WS-5, the different bond-breaking mode in TOF-SIMS and dynamic dye-loading amount during the coadsorption process are well-compared with two different anchoring groups, such as benzoic acid and cyanoacrylic acid. With the bombardment mode in TOF-SIMS spectra, we have speculated that the cyano group grafts onto nanoporous TiO 2 as tridentate binding for the common anchoring unit of cyanoacrylic acid and confirmed it through extensive first-principles density functional theory calculation by anchoring either the carboxyl or cyano group, which shows that the cyano group can efficiently participate in the adsorption of the WS-5 molecule onto the TiO 2 nanocrystal. The grafting reinforcement interaction between the cyano group and TiO 2 in WS-5 can well-explain the rapid adsorption characteristics. A strong coordinate bond between the lone pair of electrons on the nitrogen or oxygen atom and the Lewis acid sites of TiO 2 can increase electron injection efficiencies with respect to those from the bond between the benzoic acid group and the Brønsted acid sites of the TiO 2 surface. Upon optimization of the coadsorption process with dye WS-5, the photoelectric conversion efficiency based on porphyrin dye FW-1 is increased from 6.14 to 9.72%. The study on the adsorption dynamics of organic sensitizers with TOF-SIMS analysis might provide a new venue for improvement of cosensitized solar cells.

Biomolecular damage induced by ionizing radiation: the direct and indirect effects of low-energy electrons on DNA.

PubMed

Alizadeh, Elahe; Orlando, Thomas M; Sanche, Léon

2015-04-01

Many experimental and theoretical advances have recently allowed the study of direct and indirect effects of low-energy electrons (LEEs) on DNA damage. In an effort to explain how LEEs damage the human genome, researchers have focused efforts on LEE interactions with bacterial plasmids, DNA bases, sugar analogs, phosphate groups, and longer DNA moieties. Here, we summarize the current understanding of the fundamental mechanisms involved in LEE-induced damage of DNA and complex biomolecule films. Results obtained by several laboratories on films prepared and analyzed by different methods and irradiated with different electron-beam current densities and fluencies are presented. Despite varied conditions (e.g., film thicknesses and morphologies, intrinsic water content, substrate interactions, and extrinsic atmospheric compositions), comparisons show a striking resemblance in the types of damage produced and their yield functions. The potential of controlling this damage using molecular and nanoparticle targets with high LEE yields in targeted radiation-based cancer therapies is also discussed.

Strategies for Multi-Modal Analysis

NASA Astrophysics Data System (ADS)

Hexemer, Alexander; Wang, Cheng; Pandolfi, Ronald; Kumar, Dinesh; Venkatakrishnan, Singanallur; Sethian, James; Camera Team

This section on soft materials will be dedicated to discuss the extraction of the chemical distribution and spatial arrangement of constituent elements and functional groups at multiple length scales and, thus, the examination of collective dynamics, transport, and electronic ordering phenomena. Traditional measures of structure in soft materials have relied heavily on scattering and imaging based techniques due to their capacity to measure nanoscale dimensions and their capacity to monitor structure under conditions of dynamic stress loading. Special attentions are planned to focus on the application of resonant x-ray scattering, contrast-varied neutron scattering, analytical transmission electron microscopy, and their combinations. This session aims to bring experts in both scattering and electron microscope fields to discuss recent advances in selectively characterizing structural architectures of complex soft materials, which have often multi-components with a wide range of length scales and multiple functionalities, and thus hopes to foster novel ideas to decipher a higher level of structural complexity in soft materials in future. CAMERA, Early Career Award.

An electrostatically and a magnetically confined electron gun lens system

NASA Technical Reports Server (NTRS)

Bernius, Mark T.; Man, Kin F.; Chutjian, Ara

1988-01-01

Focal properties, electron trajectory calculations, and geometries are given for two electron 'gun' lens systems that have a variety of applications in, for example, electron-neutral and electron-ion scattering experiments. One nine-lens system utilizes only electrostatic confinement and is capable of focusing electrons onto a fixed target with extremely small divergence angles, over a range of final energies 1-790 eV. The second gun lens system is a simpler three-lens system suitable for use in a uniform, solenoidal magnetic field. While the focusing properties of such a magnetically confined lens systenm are simpler to deal with, the system does illustrate features of electron extraction and Brillouin flow that have not been suitably emphasized in the literature.

Electrostatic plasma lens for focusing negatively charged particle beams.

PubMed

Goncharov, A A; Dobrovolskiy, A M; Dunets, S M; Litovko, I V; Gushenets, V I; Oks, E M

2012-02-01

We describe the current status of ongoing research and development of the electrostatic plasma lens for focusing and manipulating intense negatively charged particle beams, electrons, and negative ions. The physical principle of this kind of plasma lens is based on magnetic isolation electrons providing creation of a dynamical positive space charge cloud in shortly restricted volume propagating beam. Here, the new results of experimental investigations and computer simulations of wide-aperture, intense electron beam focusing by plasma lens with positive space charge cloud produced due to the cylindrical anode layer accelerator creating a positive ion stream towards an axis system is presented.

Twelve-month drug cost savings related to use of an electronic prescribing system with integrated decision support in primary care.

PubMed

McMullin, S Troy; Lonergan, Thomas P; Rynearson, Charles S

2005-05-01

We reported previously the results of a 6-month controlled trial in which the use of a commercially available electronic prescribing system with integrated clinical decision support and evidence-based message capability was associated with significantly lower primary care drug costs. The original study focused on new prescriptions, defined as claims for a medication that the patient had not received in the previous 12 months. The main objectives of this follow-up report were to (a) determine if the 6-month savings on new prescriptions were sustained during 12 months of follow-up, (b) evaluate the impact of the computerized decision support system (CDSS) on all pharmacy claims and per-member-per-month (PMPM) expenditures, and (c) evaluate the prescribing behaviors within 8 high-cost therapeutic categories that were frequently targeted by the electronic messages to prescribers to help verify that the drug cost savings were due to the recommendations in the electronic prescribing system. Two database queries were performed to identify additional pharmacy claims data for all Network Health Plan patients who were cared for by the 38 primary care clinicians (32 physicians, 4 nurse practitioners, and 2 physician assistants) included in our original 6-month study. This follow-up analysis (a) identified all new prescription claims for the 2 groups of clinicians throughout the 12-month follow-up period (June 2002 through May 2003) and (b) assessed all pharmacy claims during the same 12-month period to provide more complete savings estimates and to examine between-group differences in PMPM expenditures. During 12 months of follow-up, clinicians using the electronic prescribing system continued to have lower prescription costs than the controls. Clinicians using the electronic prescribing system had average costs for 26,674 new prescriptions that were dollar 4.12 lower (95% confidence interval, dollar 1.53-dollar 6.71; P=0.003) and PMPM expenditures that were dollar 0.57 lower than expected based on the changes observed for 24,507 new prescriptions written by clinicians in the control group. The average drug cost savings on new prescriptions were dollar 482 per prescriber per month (PPPM), based upon prescription cost and dollar 465 PPPM based upon PMPM analysis. When all pharmacy claims (156,429) were analyzed, the intervention group.s average prescription cost was dollar 2.57 lower and their PMPM expenditures were dollar 1.07 lower than expected based on the changes observed in the control group. The average drug cost savings on all pharmacy claims were dollar 863 PPPM based on average prescription cost and dollar 873 PPPM based on PMPM analysis. The proportion of prescriptions for highcost drugs that were the target of the CDSS messages to prescribers was a relative 17.5% lower among the intervention group (35.8%) compared with the control group (43.4%; P=0.03). An electronic prescribing system with integrated decision support shifted prescribing behavior away from high-cost therapies and significantly lowered prescription drug costs. The savings associated with altered prescribing behavior offset the monthly subscription cost of the system.

Design and characterization of electron beam focusing for X-ray generation in novel medical imaging architecturea

PubMed Central

Bogdan Neculaes, V.; Zou, Yun; Zavodszky, Peter; Inzinna, Louis; Zhang, Xi; Conway, Kenneth; Caiafa, Antonio; Frutschy, Kristopher; Waters, William; De Man, Bruno

2014-01-01

A novel electron beam focusing scheme for medical X-ray sources is described in this paper. Most vacuum based medical X-ray sources today employ a tungsten filament operated in temperature limited regime, with electrostatic focusing tabs for limited range beam optics. This paper presents the electron beam optics designed for the first distributed X-ray source in the world for Computed Tomography (CT) applications. This distributed source includes 32 electron beamlets in a common vacuum chamber, with 32 circular dispenser cathodes operated in space charge limited regime, where the initial circular beam is transformed into an elliptical beam before being collected at the anode. The electron beam optics designed and validated here are at the heart of the first Inverse Geometry CT system, with potential benefits in terms of improved image quality and dramatic X-ray dose reduction for the patient. PMID:24826066

Precision shape modification of nanodevices with a low-energy electron beam

DOEpatents

Zettl, Alex; Yuzvinsky, Thomas David; Fennimore, Adam

2010-03-09

Methods of shape modifying a nanodevice by contacting it with a low-energy focused electron beam are disclosed here. In one embodiment, a nanodevice may be permanently reformed to a different geometry through an application of a deforming force and a low-energy focused electron beam. With the addition of an assist gas, material may be removed from the nanodevice through application of the low-energy focused electron beam. The independent methods of shape modification and material removal may be used either individually or simultaneously. Precision cuts with accuracies as high as 10 nm may be achieved through the use of precision low-energy Scanning Electron Microscope scan beams. These methods may be used in an automated system to produce nanodevices of very precise dimensions. These methods may be used to produce nanodevices of carbon-based, silicon-based, or other compositions by varying the assist gas.

Quantum Monte Carlo Endstation for Petascale Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lubos Mitas

2011-01-26

NCSU research group has been focused on accomplising the key goals of this initiative: establishing new generation of quantum Monte Carlo (QMC) computational tools as a part of Endstation petaflop initiative for use at the DOE ORNL computational facilities and for use by computational electronic structure community at large; carrying out high accuracy quantum Monte Carlo demonstration projects in application of these tools to the forefront electronic structure problems in molecular and solid systems; expanding the impact of QMC methods and approaches; explaining and enhancing the impact of these advanced computational approaches. In particular, we have developed quantum Monte Carlomore » code (QWalk, www.qwalk.org) which was significantly expanded and optimized using funds from this support and at present became an actively used tool in the petascale regime by ORNL researchers and beyond. These developments have been built upon efforts undertaken by the PI's group and collaborators over the period of the last decade. The code was optimized and tested extensively on a number of parallel architectures including petaflop ORNL Jaguar machine. We have developed and redesigned a number of code modules such as evaluation of wave functions and orbitals, calculations of pfaffians and introduction of backflow coordinates together with overall organization of the code and random walker distribution over multicore architectures. We have addressed several bottlenecks such as load balancing and verified efficiency and accuracy of the calculations with the other groups of the Endstation team. The QWalk package contains about 50,000 lines of high quality object-oriented C++ and includes also interfaces to data files from other conventional electronic structure codes such as Gamess, Gaussian, Crystal and others. This grant supported PI for one month during summers, a full-time postdoc and partially three graduate students over the period of the grant duration, it has resulted in 13 published papers, 15 invited talks and lectures nationally and internationally. My former graduate student and postdoc Dr. Michal Bajdich, who was supported byt this grant, is currently a postdoc with ORNL in the group of Dr. F. Reboredo and Dr. P. Kent and is using the developed tools in a number of DOE projects. The QWalk package has become a truly important research tool used by the electronic structure community and has attracted several new developers in other research groups. Our tools use several types of correlated wavefunction approaches, variational, diffusion and reptation methods, large-scale optimization methods for wavefunctions and enables to calculate energy differences such as cohesion, electronic gaps, but also densities and other properties, using multiple runs one can obtain equations of state for given structures and beyond. Our codes use efficient numerical and Monte Carlo strategies (high accuracy numerical orbitals, multi-reference wave functions, highly accurate correlation factors, pairing orbitals, force biased and correlated sampling Monte Carlo), are robustly parallelized and enable to run on tens of thousands cores very efficiently. Our demonstration applications were focused on the challenging research problems in several fields of materials science such as transition metal solids. We note that our study of FeO solid was the first QMC calculation of transition metal oxides at high pressures.« less

Electron interactions with the heteronuclear carbonyl precursor H2FeRu3(CO)13 and comparison with HFeCo3(CO)12: from fundamental gas phase and surface science studies to focused electron beam induced deposition.

PubMed

P, Ragesh Kumar T; Weirich, Paul; Hrachowina, Lukas; Hanefeld, Marc; Bjornsson, Ragnar; Hrodmarsson, Helgi Rafn; Barth, Sven; Fairbrother, D Howard; Huth, Michael; Ingólfsson, Oddur

2018-01-01

In the current contribution we present a comprehensive study on the heteronuclear carbonyl complex H 2 FeRu 3 (CO) 13 covering its low energy electron induced fragmentation in the gas phase through dissociative electron attachment (DEA) and dissociative ionization (DI), its decomposition when adsorbed on a surface under controlled ultrahigh vacuum (UHV) conditions and exposed to irradiation with 500 eV electrons, and its performance in focused electron beam induced deposition (FEBID) at room temperature under HV conditions. The performance of this precursor in FEBID is poor, resulting in maximum metal content of 26 atom % under optimized conditions. Furthermore, the Ru/Fe ratio in the FEBID deposit (≈3.5) is higher than the 3:1 ratio predicted. This is somewhat surprising as in recent FEBID studies on a structurally similar bimetallic precursor, HFeCo 3 (CO) 12 , metal contents of about 80 atom % is achievable on a routine basis and the deposits are found to maintain the initial Co/Fe ratio. Low temperature (≈213 K) surface science studies on thin films of H 2 FeRu 3 (CO) 13 demonstrate that electron stimulated decomposition leads to significant CO desorption (average of 8-9 CO groups per molecule) to form partially decarbonylated intermediates. However, once formed these intermediates are largely unaffected by either further electron irradiation or annealing to room temperature, with a predicted metal content similar to what is observed in FEBID. Furthermore, gas phase experiments indicate formation of Fe(CO) 4 from H 2 FeRu 3 (CO) 13 upon low energy electron interaction. This fragment could desorb at room temperature under high vacuum conditions, which may explain the slight increase in the Ru/Fe ratio of deposits in FEBID. With the combination of gas phase experiments, surface science studies and actual FEBID experiments, we can offer new insights into the low energy electron induced decomposition of this precursor and how this is reflected in the relatively poor performance of H 2 FeRu 3 (CO) 13 as compared to the structurally similar HFeCo 3 (CO) 12 .

Electron interactions with the heteronuclear carbonyl precursor H2FeRu3(CO)13 and comparison with HFeCo3(CO)12: from fundamental gas phase and surface science studies to focused electron beam induced deposition

PubMed Central

P, Ragesh Kumar T; Weirich, Paul; Hrachowina, Lukas; Hanefeld, Marc; Bjornsson, Ragnar; Hrodmarsson, Helgi Rafn; Barth, Sven; Fairbrother, D Howard; Huth, Michael

2018-01-01

In the current contribution we present a comprehensive study on the heteronuclear carbonyl complex H2FeRu3(CO)13 covering its low energy electron induced fragmentation in the gas phase through dissociative electron attachment (DEA) and dissociative ionization (DI), its decomposition when adsorbed on a surface under controlled ultrahigh vacuum (UHV) conditions and exposed to irradiation with 500 eV electrons, and its performance in focused electron beam induced deposition (FEBID) at room temperature under HV conditions. The performance of this precursor in FEBID is poor, resulting in maximum metal content of 26 atom % under optimized conditions. Furthermore, the Ru/Fe ratio in the FEBID deposit (≈3.5) is higher than the 3:1 ratio predicted. This is somewhat surprising as in recent FEBID studies on a structurally similar bimetallic precursor, HFeCo3(CO)12, metal contents of about 80 atom % is achievable on a routine basis and the deposits are found to maintain the initial Co/Fe ratio. Low temperature (≈213 K) surface science studies on thin films of H2FeRu3(CO)13 demonstrate that electron stimulated decomposition leads to significant CO desorption (average of 8–9 CO groups per molecule) to form partially decarbonylated intermediates. However, once formed these intermediates are largely unaffected by either further electron irradiation or annealing to room temperature, with a predicted metal content similar to what is observed in FEBID. Furthermore, gas phase experiments indicate formation of Fe(CO)4 from H2FeRu3(CO)13 upon low energy electron interaction. This fragment could desorb at room temperature under high vacuum conditions, which may explain the slight increase in the Ru/Fe ratio of deposits in FEBID. With the combination of gas phase experiments, surface science studies and actual FEBID experiments, we can offer new insights into the low energy electron induced decomposition of this precursor and how this is reflected in the relatively poor performance of H2FeRu3(CO)13 as compared to the structurally similar HFeCo3(CO)12. PMID:29527432

Ynamides in Ring Forming Transformations

PubMed Central

WANG, XIAO-NA; YEOM, HYUN-SUK; FANG, LI-CHAO; HE, SHUZHONG; MA, ZHI-XIONG; KEDROWSKI, BRANT L.; HSUNG, RICHARD P.

2013-01-01

Conspectus The ynamide functional group activates carbon-carbon triple bonds through an attached nitrogen atom that bears an electron-withdrawing group. As a result, the alkyne has both electrophilic and nucleophilic properties. Through the selection of the electron-withdrawing group attached to nitrogen chemists can modulate the electronic properties and reactivity of ynamides, making these groups versatile synthetic building blocks. The reactions of ynamides also lead directly to nitrogen-containing products, which provides access to important structural motifs found in natural products and molecules of medicinal interest. Therefore, researchers have invested increasing time and research in the chemistry of ynamides in recent years. This Account surveys and assesses new organic transformations involving ynamides developed in our laboratory and in others around the world. We showcase the synthetic power of ynamides for rapid assembly of complex molecular structures. Among the recent reports of ynamide transformations, ring-forming reactions provide a powerful tool for generating molecular complexity quickly. In addition to their synthetic utility, such reactions are mechanistically interesting. Therefore, we focus primarily on the cyclization chemistry of ynamides. This Account highlights ynamide reactions that are useful in the rapid synthesis of cyclic and polycyclic structural manifolds. We discuss the mechanisms active in the ring formations and describe representative examples that demonstrate the scope of these reactions and provide mechanistic insights. In this discussion we feature examples of ynamide reactions involving radical cyclizations, ring-closing metathesis, transition metal and non-transition metal mediated cyclizations, cycloaddition reactions, and rearrangements. The transformations presented rapidly introduce structural complexity and include nitrogen within, or in close proximity to, a newly formed ring (or rings). Thus, ynamides have emerged as powerful synthons for nitrogen-containing heterocycles and nitrogen-substituted rings, and we hope this Account will promote continued interest in the chemistry of ynamides. PMID:24164363

Low-valent group 14 element hydride chemistry: towards catalysis.

PubMed

Hadlington, Terrance J; Driess, Matthias; Jones, Cameron

2018-06-05

The chemistry of group 14 element(ii) hydride complexes has rapidly expanded since the first stable example of such a compound was reported in 2000. Since that time it has become apparent that these systems display remarkable reactivity patterns, in some cases mimicking those of late transition-metal (TM) hydride compounds. This is especially so for the hydroelementation of unsaturated organic substrates. Recently, this aspect of their reactivity has been extended to the use of group 14 element(ii) hydrides as efficient, "TM-like" catalysts in organic synthesis. This review will detail how the chemistry of these hydride compounds has advanced since their early development. Throughout, there is a focus on the importance of ligand effects in these systems, and how ligand design can greatly modify a coordinated complex's electronic structure, reactivity, and catalytic efficiency.

An Experimental Study of the Plasma Focus Device as a Charged Particle Accelerator

DTIC Science & Technology

1988-11-01

The dense plasma focus has been investigated at many laboratories as a possible fusion device. Typical plasma parameters for this device are electron...temperatures of 1 keV, densities of 10 to the 19th power per cc, and confinement times of 100 ns. Characteristic of the plasma focus discharge are...neutrons. The emphasis of this work is to investigate the electron and ion emission from the plasma focus and the development of appropriate diagnostics to

Organizational and technological insight as important factors for successful implementation of IT.

PubMed

Nikula, R E

1999-01-01

Politicians and hospital management in Sweden and Denmark focus on IT and especially Electronic Patient Record, EPR as a tool for changes that will lead to better economy as well as better quality and service to the patients. These changes are not direct effects of the new medium for patient records but indirect effects due to the possibilities embedded in the new technology. To ensure that the implementation is successful, i.e. leads to changes in organization structure and workflow, we need tools to prepare clinicians and management. The focus of this paper is the individual insight in technology and organization and it proposes a model to assess and categorize the possibilities of individuals and groups to participate in and make an implementation process powerful.

MAGNETIC DEFLEXION OF ELECTRON BEAMS WITHOUT ASTIGMATISM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Archard, G.D.; Mulvey, T.

1958-09-01

An electron beam passing through a magnetic defiecting field is, in general, subject to astigmatism. For circular pole pieces, this takes the form of focusing in the plane of deflection; for square pole pieces, focusing perpendicular to the pinne of deflection. Deflection free from astigmatism can be achieved by means of circular pole-pieces from which semicircular portions have been removed. An application of this to reflection electron microsccpy is described. (auth)

Effects of group velocity and multiplasmon resonances on the modulation of Langmuir waves in a degenerate plasma

NASA Astrophysics Data System (ADS)

Misra, Amar P.; Chatterjee, Debjani; Brodin, Gert

2017-11-01

We study the nonlinear wave modulation of Langmuir waves (LWs) in a fully degenerate plasma. Using the Wigner-Moyal equation coupled to the Poisson equation and the multiple scale expansion technique, a modified nonlocal nonlinear Schrödinger (NLS) equation is derived which governs the evolution of LW envelopes in degenerate plasmas. The nonlocal nonlinearity in the NLS equation appears due to the group velocity and multiplasmon resonances, i.e., resonances induced by the simultaneous particle absorption of multiple wave quanta. We focus on the regime where the resonant velocity of electrons is larger than the Fermi velocity and thereby the linear Landau damping is forbidden. As a result, the nonlinear wave-particle resonances due to the group velocity and multiplasmon processes are the dominant mechanisms for wave-particle interaction. It is found that in contrast to classical or semiclassical plasmas, the group velocity resonance does not necessarily give rise the wave damping in the strong quantum regime where ℏ k ˜m vF with ℏ denoting the reduced Planck's constant, m the electron mass, and vF the Fermi velocity; however, the three-plasmon process plays a dominant role in the nonlinear Landau damping of wave envelopes. In this regime, the decay rate of the wave amplitude is also found to be higher compared to that in the modest quantum regime where the multiplasmon effects are forbidden.

Focus characterization at an X-ray free-electron laser by coherent scattering and speckle analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sikorski, Marcin; Song, Sanghoon; Schropp, Andreas

2015-04-14

X-ray focus optimization and characterization based on coherent scattering and quantitative speckle size measurements was demonstrated at the Linac Coherent Light Source. Its performance as a single-pulse free-electron laser beam diagnostic was tested for two typical focusing configurations. The results derived from the speckle size/shape analysis show the effectiveness of this technique in finding the focus' location, size and shape. In addition, its single-pulse compatibility enables users to capture pulse-to-pulse fluctuations in focus properties compared with other techniques that require scanning and averaging.

Electron-Beam Mapping of Vibrational Modes with Nanometer Spatial Resolution.

PubMed

Dwyer, C; Aoki, T; Rez, P; Chang, S L Y; Lovejoy, T C; Krivanek, O L

2016-12-16

We demonstrate that a focused beam of high-energy electrons can be used to map the vibrational modes of a material with a spatial resolution of the order of one nanometer. Our demonstration is performed on boron nitride, a polar dielectric which gives rise to both localized and delocalized electron-vibrational scattering, either of which can be selected in our off-axial experimental geometry. Our experimental results are well supported by our calculations, and should reconcile current controversy regarding the spatial resolution achievable in vibrational mapping with focused electron beams.

Amorphization induced by focused ion beam milling in metallic and electronic materials.

PubMed

Huh, Yoon; Hong, Ki Jung; Shin, Kwang Soo

2013-08-01

Focused ion beam (FIB) milling using high-energy gallium ions is widely used in the preparation of specimens for transmission electron microscopy (TEM). However, the energetic ion beam induces amorphization on the edge of specimens during milling, resulting in a mischievous influence on the clearness of high-quality transmission electron micrographs. In this work, the amorphization induced by the FIB milling was investigated by TEM for three kinds of materials, metallic materials in bulk shape, and semiconductive and electronic ceramic materials as a substrate for the deposition of thin films.

Focus on Mechanical Failures: Mechanisms and Detection. Proceedings of the Meeting (45th) of the Mechanical Failures Prevention Group Held in Annapolis, Maryland on April 9 - 11, 1999

DTIC Science & Technology

1991-04-04

solution to this immediate problem and, as the technology developed, opened doors to applied tribology for advanced maintenance through Mechanical Systems...Integrity Management. The development of other technologies as well enhanced Spectron’s capability, but it was the major advances in electronics and...strain gages will also be studied. The results of this program will provide a basis for future work in the area of advanced sensor technology . ONCUBSIONS

Educational Systems Design Implications of Electronic Publishing.

ERIC Educational Resources Information Center

Romiszowski, Alexander J.

1994-01-01

Discussion of electronic publishing focuses on the four main purposes of media in general: communication, entertainment, motivation, and education. Highlights include electronic journals and books; hypertext; user control; computer graphics and animation; electronic games; virtual reality; multimedia; electronic performance support;…

Enhanced avatar design using cognitive map-based simulation.

PubMed

Lee, Kun Chang; Moon, Byung Suk

2007-12-01

With the advent of the Internet era and the maturation of electronic commerce, strategic avatar design has become an important way of keeping up with market changes and customer tastes. In this study, we propose a new approach to an adaptive avatar design that uses cognitive map (CM) as a what-if simulation vehicle. The main virtue of the new design is its ability to change specific avatar design features with objective consideration of the subsequent effects upon other design features, thereby enhancing user satisfaction. Statistical analyses of focus group interview results with a group of experts majoring in avatars and CM showed that our proposed approach could be used to effectively analyze avatar design in an adaptive and practical manner when the market situation is changing.

Automated Web-Based Request Mechanism for Workflow Enhancement in an Academic Customer-Focused Biorepository.

PubMed

McDonald, Sandra A; Ryan, Benjamin J; Brink, Amy; Holtschlag, Victoria L

2012-02-01

Informatics systems, particularly those that provide capabilities for data storage, specimen tracking, retrieval, and order fulfillment, are critical to the success of biorepositories and other laboratories engaged in translational medical research. A crucial item-one easily overlooked-is an efficient way to receive and process investigator-initiated requests. A successful electronic ordering system should allow request processing in a maximally efficient manner, while also allowing streamlined tracking and mining of request data such as turnaround times and numerical categorizations (user groups, funding sources, protocols, and so on). Ideally, an electronic ordering system also facilitates the initial contact between the laboratory and customers, while still allowing for downstream communications and other steps toward scientific partnerships. We describe here the recently established Web-based ordering system for the biorepository at Washington University Medical Center, along with its benefits for workflow, tracking, and customer service. Because of the system's numerous value-added impacts, we think our experience can serve as a good model for other customer-focused biorepositories, especially those currently using manual or non-Web-based request systems. Our lessons learned also apply to the informatics developers who serve such biobanks.

Automated Web-Based Request Mechanism for Workflow Enhancement in an Academic Customer-Focused Biorepository

PubMed Central

Ryan, Benjamin J.; Brink, Amy; Holtschlag, Victoria L.

2012-01-01

Informatics systems, particularly those that provide capabilities for data storage, specimen tracking, retrieval, and order fulfillment, are critical to the success of biorepositories and other laboratories engaged in translational medical research. A crucial item—one easily overlooked—is an efficient way to receive and process investigator-initiated requests. A successful electronic ordering system should allow request processing in a maximally efficient manner, while also allowing streamlined tracking and mining of request data such as turnaround times and numerical categorizations (user groups, funding sources, protocols, and so on). Ideally, an electronic ordering system also facilitates the initial contact between the laboratory and customers, while still allowing for downstream communications and other steps toward scientific partnerships. We describe here the recently established Web-based ordering system for the biorepository at Washington University Medical Center, along with its benefits for workflow, tracking, and customer service. Because of the system's numerous value-added impacts, we think our experience can serve as a good model for other customer-focused biorepositories, especially those currently using manual or non-Web–based request systems. Our lessons learned also apply to the informatics developers who serve such biobanks. PMID:23386921

"You Have to Approach Us Right": A Qualitative Framework Analysis for Recruiting African Americans Into mHealth Research.

PubMed

James, Delores C S; Harville, Cedric; Efunbumi, Orisatalabi; Babazadeh, Ida; Ali, Sheriza

2017-10-01

Despite the high ownership of smartphones, African Americans (AAs) remain underrepresented in health research and specifically mobile health (mHealth) research. This may be due to ineffective recruitment efforts. To explore strategies for recruiting AAs into mHealth research and examine how these strategies may vary by gender and age-group. Twenty triad focus groups ( n = 60) were conducted with AA males ( n = 9 groups) and females ( n = 11 groups). The framework method was used to manage, organize, synthesize, and analyze data themes by gender and age-group (18-29, 30-50, 51+). Most participants owned smartphones (71%) and were willing to participate in mHealth research (62%). The participants' narrative revealed the tension between mistrust of researchers and the excitement of participating in technology-based research. Both genders and all age-groups can be reached via word-of-mouth because it is "the best advertisement." Personal contact must precede traditional and electronic recruitment strategies because "we have to know you." Churches are excellent places for recruitment because they are "trustworthy" and have a "repeat audience." Facebook may be effective for both genders and all age-groups because "everybody is on Facebook" and it can "reach more people than text and e-mail." Beauty/barber shops may be limited in reaching both genders and age-groups, but especially young women who style their own hair natural, and young men who wear braids and dreadlocks. Personal contact must precede traditional and electronic recruitment strategies because "we have to know you." A tailored, multipronged strategy that combines traditional recruitment methods with texting, e-mail, and social media may be effective in recruiting AA adults into mHealth research.

A Novel Model for Predicting Rehospitalization Risk Incorporating Physical Function, Cognitive Status, and Psychosocial Support Using Natural Language Processing.

PubMed

Greenwald, Jeffrey L; Cronin, Patrick R; Carballo, Victoria; Danaei, Goodarz; Choy, Garry

2017-03-01

With the increasing focus on reducing hospital readmissions in the United States, numerous readmissions risk prediction models have been proposed, mostly developed through analyses of structured data fields in electronic medical records and administrative databases. Three areas that may have an impact on readmission but are poorly captured using structured data sources are patients' physical function, cognitive status, and psychosocial environment and support. The objective of the study was to build a discriminative model using information germane to these 3 areas to identify hospitalized patients' risk for 30-day all cause readmissions. We conducted clinician focus groups to identify language used in the clinical record regarding these 3 areas. We then created a dataset including 30,000 inpatients, 10,000 from each of 3 hospitals, and searched those records for the focus group-derived language using natural language processing. A 30-day readmission prediction model was developed on 75% of the dataset and validated on the other 25% and also on hospital specific subsets. Focus group language was aggregated into 35 variables. The final model had 16 variables, a validated C-statistic of 0.74, and was well calibrated. Subset validation of the model by hospital yielded C-statistics of 0.70-0.75. Deriving a 30-day readmission risk prediction model through identification of physical, cognitive, and psychosocial issues using natural language processing yielded a model that performs similarly to the better performing models previously published with the added advantage of being based on clinically relevant factors and also automated and scalable. Because of the clinical relevance of the variables in the model, future research may be able to test if targeting interventions to identified risks results in reductions in readmissions.

CAE "FOCUS" for modelling and simulating electron optics systems: development and application

NASA Astrophysics Data System (ADS)

Trubitsyn, Andrey; Grachev, Evgeny; Gurov, Victor; Bochkov, Ilya; Bochkov, Victor

2017-02-01

Electron optics is a theoretical base of scientific instrument engineering. Mathematical simulation of occurring processes is a base for contemporary design of complicated devices of the electron optics. Problems of the numerical mathematical simulation are effectively solved by CAE system means. CAE "FOCUS" developed by the authors includes fast and accurate methods: boundary element method (BEM) for the electric field calculation, Runge-Kutta- Fieghlberg method for the charged particle trajectory computation controlling an accuracy of calculations, original methods for search of terms for the angular and time-of-flight focusing. CAE "FOCUS" is organized as a collection of modules each of which solves an independent (sub) task. A range of physical and analytical devices, in particular a microfocus X-ray tube of high power, has been developed using this soft.

Estimation of electron temperature and radiation emission of a low energy (2.2 kJ) plasma focus device

NASA Astrophysics Data System (ADS)

Khan, M. Z.; Yap, S. L.; Wong, C. S.

2014-01-01

Radiation emission in a 2.2 kJ Mather-type plasma focus device is investigated using a five channel BPX65 PIN diode spectrometer. At optimum condition, radiation emission from the system is found to be strongly influenced in hollow anode and filling gas pressure. Maximum X-ray yield in 4π sr has been obtained in case of hollow anode in argon gas medium due to interaction of electron beam. Results indicate that an appropriate design of anode can enhance radiation emission by more intense interaction of expected electron beam with hollow anode. The outcome is helpful to design a plasma focus with enhanced X-ray generation with improved shot-to-shot reproducibility in plasma focus device.

Using Focus Group Interviews to Analyze the Behavior of Users of New Types of Tobacco Products

PubMed Central

2017-01-01

Objectives To characterize the usage patterns of new types of tobacco products (NTTPs) to develop effective strategies for the regulation of NTTPs in Korea. Methods We conducted focus group interviews to identify the NTTP usage patterns of research subjects. The NTTPs were limited to electronic cigarettes (e-cigarettes), waterpipe tobacco, and rolling tobacco. We categorized 30 research subjects into 4 groups. The e-cigarette group was divided into adult and adolescent groups. Each group contained 7-8 subjects. An interview lasting approximately 2 hours was conducted with each group. Results Ninety percent of NTTP users used an NTTP in combination with conventional cigarettes. Subjects mostly bought NTTPs online, unlike how they bought cigarettes. Additionally, a great deal of information, such as how to use NTTPs and descriptions of NTTP products, was exchanged through online or offline societies. The primary reason why the subjects used NTTPs was that NTTPs offer a greater range of flavors and aromas than cigarettes. Moreover, NTTPs were felt to be less repulsive than cigarettes. NTTPs were not used as a cigarette substitute; rather, they were mostly used in places and situations where traditional cigarette smoking was not allowed. Conclusions Based on the results of this study, the government should conduct studies on the effects of the combined use of NTTPs and cigarettes on the human body, obtain and provide accurate data regarding NTTP use, and develop and implement polices to ban NTTP advertising, which may arouse adolescents’ curiosity, and the addition of flavoring substances to tobacco products. PMID:29020756

Low-energy plasma focus device as an electron beam source.

PubMed

Khan, Muhammad Zubair; Ling, Yap Seong; Yaqoob, Ibrar; Kumar, Nitturi Naresh; Kuang, Lim Lian; San, Wong Chiow

2014-01-01

A low-energy plasma focus device was used as an electron beam source. A technique was developed to simultaneously measure the electron beam intensity and energy. The system was operated in Argon filling at an optimum pressure of 1.7 mbar. A Faraday cup was used together with an array of filtered PIN diodes. The beam-target X-rays were registered through X-ray spectrometry. Copper and lead line radiations were registered upon usage as targets. The maximum electron beam charge and density were estimated to be 0.31 μC and 13.5 × 10(16)/m(3), respectively. The average energy of the electron beam was 500 keV. The high flux of the electron beam can be potentially applicable in material sciences.

A new approach for two-terminal electronic memory devices - Storing information on silicon nanowires

NASA Astrophysics Data System (ADS)

Saranti, Konstantina; Alotaibi, Sultan; Paul, Shashi

2016-06-01

The work described in this paper focuses on the utilisation of silicon nanowires as the information storage element in flash-type memory devices. Silicon nanostructures have attracted attention due to interesting electrical and optical properties, and their potential integration into electronic devices. A detailed investigation of the suitability of silicon nanowires as the charge storage medium in two-terminal non-volatile memory devices are presented in this report. The deposition of the silicon nanostructures was carried out at low temperatures (less than 400 °C) using a previously developed a novel method within our research group. Two-terminal non-volatile (2TNV) memory devices and metal-insulator-semiconductor (MIS) structures containing the silicon nanowires were fabricated and an in-depth study of their characteristics was carried out using current-voltage and capacitance techniques.

Early experiences with big data at an academic medical center.

PubMed

Halamka, John D

2014-07-01

Beth Israel Deaconess Medical Center (BIDMC), an academic health care institution affiliated with Harvard University, has been an early adopter of electronic applications since the 1970s. Various departments of the medical center and the physician practice groups affiliated with it have implemented electronic health records, filmless imaging, and networked medical devices to such an extent that data storage at BIDMC now amounts to three petabytes and continues to grow at a rate of 25 percent a year. Initially, the greatest technical challenge was the cost and complexity of data storage. However, today the major focus is on transforming raw data into information, knowledge, and wisdom. This article discusses the data growth, increasing importance of analytics, and changing user requirements that have shaped the management of big data at BIDMC. Project HOPE—The People-to-People Health Foundation, Inc.

Studies of beam position monitor stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tenenbaum, P.

1998-05-01

The authors present the results from two studies of the time stability between the mechanical center of a beam position monitor and its electrical/electronic center. In the first study, a group of 93 BPM processors was calibrated via Test Pulse Generator once per hour in order to measure the contribution of the readout electronics to offset drifts. In the second study, a triplet of stripline BPMs in the Final Focus Test Beam, separated only by drift spaces, was read out every 6 minutes during 1 week of beam operation. In both cases offset stability was observed to be on themore » order of microns over time spans ranging from hours to days, although during the beam study much worse performance was also observed. Implications for the beam position monitor system of future linear collider systems are discussed.« less

Influence of chlorhexidine on dentin adhesive interface micromorphology and nanoleakage expression of resin cements.

PubMed

Stape, Thiago Henrique Scarabello; Menezes, Murilo De Sousa; Barreto, Bruno De Castro Ferreira; Naves, Lucas Zago; Aguiar, Flávio Henrique Baggio; Quagliatto, Paulo Sérgio; Martins, Luís Roberto Marcondes

2013-08-01

This study focused on adhesive interface morphologic characterization and nanoleakage expression of resin cements bonded to human dentin pretreated with 1% chlorhexidine (CHX). Thirty-two non-carious human third molars were ground flat to expose superficial dentin. Resin composite blocks were luted to the exposed dentin using one conventional (RelyX ARC) and one self-adhesive resin cement (RelyX U100), with/without CHX pretreatment. Four groups (n = 8) were obtained: control groups (ARC and U100); experimental groups (ARC/CHX and U100/CHX) were pretreated with 1% CHX prior to the luting process. After storage in water for 24 h, the bonded teeth were sectioned into 0.9 × 0.9 mm(2) sticks producing a minimum of 12 sticks per tooth. Four sticks from each tooth were prepared for hybrid layer evaluation by scanning electron microscope analysis. The remaining sticks were immersed in silver nitrate for 24 h for either nanoleakage evaluation along the bonded interfaces or after rupture. Nanoleakage samples were carbon coated and examined using backscattered electron mode. Well-established hybrid layers were observed in the groups luted with RelyX ARC. Nanoleakage evaluation revealed increase nanoleakage in groups treated with CHX for both resin cements. Group U100/CHX exhibited the most pronouncing nanoleakage expression along with porous zones adjacent to the CHX pretreated dentin. The results suggest a possible incompatibility between CHX and RelyX U100 that raises the concern that the use of CHX with self-adhesive cements may adversely affect resin-dentin bond. Copyright © 2013 Wiley Periodicals, Inc.

Synthesis, properties and applications of 2D layered MIIIXVI (M = Ga, In; X = S, Se, Te) materials.

PubMed

Xu, Kai; Yin, Lei; Huang, Yun; Shifa, Tofik Ahmed; Chu, Junwei; Wang, Feng; Cheng, Ruiqing; Wang, Zhenxing; He, Jun

2016-09-29

Group III-VI compounds M III X VI (M = Ga, In; X = S, Se, Te) are one class of important 2D layered materials and are currently attracting increasing interest due to their unique electronic and optoelectronic properties and their great potential applications in various other fields. Similar to 2D layered transition metal dichalcogenides (TMDs), M III X VI also have the significant merits of ultrathin thickness, ultrahigh surface-to-volume ratio, and high compatibility with flexible devices. More impressively, in contrast with TMDCs, M III X VI demonstrate many superior properties, such as direct band gap electronic structure, high carrier mobility, rare p-type electronic behaviors, high charge density, and so on. These unique characteristics cause high-performance device applications in electronics, optoelectronics, and optics. In this review, we aim to provide a summary of the state-of-the-art of research activities in 2D layered M III X VI materials. The scope of the review covers the synthesis and properties of 2D layered M III X VI materials and their van der Waals heterostructures. We especially focus on the applications in electronics and optoelectronics. Moreover, the review concludes with some perspectives on future developments in this field.

Electronic Brief Intervention and Text Messaging for Marijuana Use During Pregnancy: Initial Acceptability of Patients and Providers.

PubMed

Gray, Justin; Beatty, Jessica R; Svikis, Dace S; Puder, Karoline S; Resnicow, Ken; Konkel, Janine; Rice, Shetoya; McGoron, Lucy; Ondersma, Steven J

2017-11-08

Marijuana is the most widely used illicit substance during pregnancy. Technology-delivered brief interventions and text messaging have shown promise in general and pregnant samples but have not yet been applied to marijuana use in pregnancy. The objective of the study was to evaluate, among pregnant women and prenatal care providers, the acceptability of an electronic brief intervention and text messaging plan for marijuana use in pregnancy. Participants included patients (n=10) and medical staff (n=12) from an urban prenatal clinic. Patient-participants were recruited directly during a prenatal care visit. Those who were eligible reviewed the interventions individually and provided quantitative and qualitative feedback regarding software acceptability and helpfulness during a one-on-one interview with research staff. Provider-participants took part in focus groups in which the intervention materials were reviewed and discussed. Qualitative and focus group feedback was transcribed, coded manually, and classified by category and theme. Patient-participants provided high ratings for satisfaction, with mean ratings for respectfulness, interest, ease of use, and helpfulness ranging between 4.4 and 4.7 on a 5-point Likert scale. Of the 10 participants, 5 reported that they preferred working with the program versus their doctor, and 9 of 10 said the intervention made them more likely to reduce their marijuana use. Provider-participants received the program favorably, stating the information presented was both relevant and important for their patient population. The findings support the acceptability of electronic brief intervention and text messaging for marijuana use during pregnancy. This, combined with their ease of use and low barrier to initiation, suggests that further evaluation in a randomized trial is appropriate. ©Justin Gray, Jessica R Beatty, Dace S Svikis, Karoline S Puder, Ken Resnicow, Janine Konkel, Shetoya Rice, Lucy McGoron, Steven J Ondersma. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 08.11.2017.

A qualitative evaluation of general practitioners’ views on protocol-driven eReferral in Scotland

PubMed Central

2014-01-01

Background The ever increasing volume of referrals from primary care to specialist services is putting considerable pressure on resource-constrained health services while effective communication across fragmented services remains a substantial challenge. Previous studies have suggested that electronic referrals (eReferral) can bear important benefits for cross-organisational processes and patient care management. Methods We conducted 25 semi-structured interviews and 1 focus group with primary care providers to elucidate General Practitioners’ (GPs) perspectives on information management processes in the patient pathway in NHSScotland, 1 focus group with members of the Scottish Electronic Patient Record programme and one interview with a senior architect of the Scottish Care Information national eReferral System (SCI Gateway). Using Normalisation Process Theory, we performed a qualitative analysis to elucidate GPs’ perspectives on eReferral to identify the factors which they felt either facilitated or hindered referral processes. Results The majority of GPs interviewed felt that eReferral substantially streamlined communication processes, with the immediate transfer of referral documents and the availability of an electronic audit trail perceived as two substantial improvements over paper-based referrals. Most GPs felt that the SCI Gateway system was reasonably straightforward to use. Referral protocols and templates could be perceived as useful by some GPs while others considered them to be cumbersome at times. Conclusion Our study suggests that the deployment and adoption of eReferral across the NHS in Scotland has been achieved by a combination of factors: (i) a policy context – including national mandatory targets for eReferral – which all NHS health-boards were bound to operationalise through their Local Delivery Plans and also (ii) the fact that primary care doctors considered that the overall benefits brought by the deployment of eReferral throughout the patient pathway significantly outweigh any potential disbenefits. PMID:24712766

MeV electron acceleration at 1kHz with <10 mJ laser pulses

NASA Astrophysics Data System (ADS)

Salehi, Fatholah; Goers, Andy; Hine, George; Feder, Linus; Kuk, Donghoon; Kim, Ki-Yong; Milchberg, Howard

2016-10-01

We demonstrate laser driven acceleration of electrons at 1 kHz repetition rate with pC charge above 1MeV per shot using < 10 mJ pulse energies focused on a near-critical density He or H2 gas jet. Using the H2 gas jet, electron acceleration to 0.5 MeV in 10 fC bunches was observed with laser pulse energy as low as 1.3mJ . Using a near-critical density gas jet sets the critical power required for relativistic self-focusing low enough for mJ scale laser pulses to self- focus and drive strong wakefields. Experiments and particle-in-cell simulations show that optimal drive pulse duration and chirp for maximum electron bunch charge and energy depends on the target gas species. High repetition rate, high charge, and short duration electron bunches driven by very modest pulse energies constitutes an ideal portable electron source for applications such as ultrafast electron diffraction experiments and high rep. rate γ-ray production. This work is supported by the US Department of Energy, the National Science Foundation, and the Air Force Office of Scientific Research.

Making electronic mail accessible: perspectives of people with acquired cognitive impairments, caregivers and professionals.

PubMed

Todis, B; Sohlberg, M M; Hood, D; Fickas, S

2005-06-01

The primary objective of this study was to better understand the technology needs, barriers and strategies of individuals with acquired cognitive impairments (ACI) in order to design and modify technologies with potential for alleviating the diminished independence and social isolation common in this population. The authors hypothesized that (1) higher rates of computer use would be reported by younger, more highly educated individuals with ACI, those with less severe injuries and those with previous computer experience; (2) A low percentage of survey respondents would own their own computers; and (3) People with ACI would experience social isolation and report low frequency of connecting with important people who live far away. A total of 133 individuals with ACI, professionals and care providers completed the survey. To gain more specific information, seven focus groups were conducted with 66 individuals with ACI and 20 care providers. Finally, 10 current email users participated in structured conversations, detailing their strategies for using email. The survey revealed that 80% of subjects with ACI reported owning a computer. Age and education were not predictors of computer use, but individuals whose ACI was the result of more severe injuries were less likely to use computers. As expected, respondents reported that maintaining contact with distant loved ones is problematic. The focus groups and conversations provided more detail about the communication needs of the population and the relative advantages and disadvantages of email compared with telephone and mail. Participants also identified barriers to email use they had encountered or feared they would encounter when using email. A number of accommodations to overcome these barriers were suggested. The results of the survey, focus groups and conversations confirmed the utility of email and other technologies for people with ACI and the need to make these technologies more accessible. The results and suggestions provided by the focus groups and interviews are being used in the design of Think and Link, an email interface for use by individuals with ACI.

An exploration of physical activity and wellbeing in university employees.

PubMed

Cooper, Kay; Barton, Gillian C

2016-05-01

The aim was to explore levels of physical activity (PA) and mental wellbeing in university employees, as well as barriers to and incentives for workplace PA. An electronic survey was distributed to all staff at one UK university. The survey consisted of a PA stages of change questionnaire, an international PA questionnaire (short-form), the Warwick-Edinburgh Mental Well-being Scale (WEMWBS), questions on perceived barriers to and incentives for workplace PA, questions on methods of enhancing employee wellbeing and demographics. A self-selected sample participated in two focus groups to explore key themes arising from the survey. Descriptive statistics were reported for survey data; associations between PA and wellbeing were tested for using Kruskal-Wallis with post hoc Mann-Whitney. Descriptive, thematic analysis was performed on focus group transcripts. A total of 502 surveys were completed (34% response rate); 13 staff participated in focus groups. In all, 42% of the sample reported PA below the recommended guideline amount. Females were less active than males (p < 0.005). The mean WEMWBS was 49.2 (95% confidence interval (CI): 48.3-49.9). Low PA levels were related to lower WEMWBS scores, with statistically significant differences in WEMWBS demonstrated between low and moderate PA (p = 0.05) and low and high PA (p = 0.001). Lack of time and perceived expense of facilities were common barriers to workplace PA. The main focus group finding was the impact of university culture on workplace PA and wellbeing. University staff demonstrate PA levels and a relationship between PA and wellbeing similar to the general population. Carefully designed strategies aimed at enhancing PA and wellbeing in university staff are required. The specific cultural and other barriers to workplace PA that exist in this setting should be considered. These results are being used to inform PA and wellbeing interventions whose effectiveness will be evaluated in future research. © Royal Society for Public Health 2015.

Interaction of an electron with coherent dipole radiation: Role of convergence and anti-dephasing

NASA Astrophysics Data System (ADS)

Robinson, A. P. L.; Arefiev, A. V.

2018-05-01

The impact of longitudinal electric fields that are present in intense focusing and defocusing electromagnetic pulses on electron acceleration is investigated. These fields are typically much weaker than the transverse fields, but it is shown that they can have a profound effect on electron energy gain. It is shown that the longitudinal electric field of a defocusing pulse is directed backward along the trajectory of an accelerated electron, which leads to a continuous net energy gain. At the same time, the effect of the transverse oscillating electric field in a defocusing pulse is to reduce the electron energy over multiple oscillations. In contrast to a well-known interaction with a plane wave, the electron is able to retain a substantial amount of energy following its interaction with a defocusing pulse. The roles of the transverse and longitudinal electric fields are reversed in a focusing pulse, which leads to a reduction in the energy retention. The present analysis underscores the importance of relatively weak oscillating electric fields in focusing and defocusing pulses.

How we give personalised audio feedback after summative OSCEs.

PubMed

Harrison, Christopher J; Molyneux, Adrian J; Blackwell, Sara; Wass, Valerie J

2015-04-01

Students often receive little feedback after summative objective structured clinical examinations (OSCEs) to enable them to improve their performance. Electronic audio feedback has shown promise in other educational areas. We investigated the feasibility of electronic audio feedback in OSCEs. An electronic OSCE system was designed, comprising (1) an application for iPads allowing examiners to mark in the key consultation skill domains, provide "tick-box" feedback identifying strengths and difficulties, and record voice feedback; (2) a feedback website giving students the opportunity to view/listen in multiple ways to the feedback. Acceptability of the audio feedback was investigated, using focus groups with students and questionnaires with both examiners and students. 87 (95%) students accessed the examiners' audio comments; 83 (90%) found the comments useful and 63 (68%) reported changing the way they perform a skill as a result of the audio feedback. They valued its highly personalised, relevant nature and found it much more useful than written feedback. Eighty-nine per cent of examiners gave audio feedback to all students on their stations. Although many found the method easy, lack of time was a factor. Electronic audio feedback provides timely, personalised feedback to students after a summative OSCE provided enough time is allocated to the process.

Modelling fragmentations of aminoacids after resonant electron attachment: quantum evidence of possible direct -OH detachment

NASA Astrophysics Data System (ADS)

Panosetti, C.; Baccarelli, I.; Sebastianelli, F.; Gianturco, F. A.

2010-10-01

We investigate some aspects of the radiation damage mechanisms in biomolecules, focusing on the modelling of resonant fragmentation caused by the attachment of low-energy electrons (LEEs) initially ejected by biological tissues when exposed to ionizing radiation. Scattering equations are formulated within a symmetry-adapted, single-center expansion of both continuum and bound electrons, and the interaction forces are obtained from a combination of ab initio calculations and a nonempirical model of exchange and correlation effects developped in our group. We present total elastic scattering cross-sections and resonance features obtained for the equilibrium geometries of glycine, alanine, proline and valine. Our results at those geometries of the target molecules are briefly shown to qualitatively explain some of the fragmentation patterns obtained in experiments. We further carry out a one-dimensional (1D) modeling for the dynamics of intramolecular energy transfers mediated by the vibrational activation of selected bonds: our calculations indicate that resonant electron attachment to glycine can trigger direct, dissociative evolution of the complex into (Gly-OH)- and -OH losses, while they also find that the same process does not occur via a direct, 1D dissociative path in the larger aminoacids of the present study.

NASA Tech Briefs, October 1995. Volume 19, No. 10

NASA Technical Reports Server (NTRS)

1995-01-01

A special focus in this issue is Data acquisition and analysis. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. Also included in this issue are Laser Tech Briefs and Industry Focus: Motion Control/ Positioning Equipment

A range-based method to calibrate a magnetic spectrometer measuring the energy spectrum of the backward electron beam of a plasma focus.

PubMed

Ceccolini, E; Rocchi, F; Mostacci, D; Sumini, M; Tartari, A

2011-08-01

The electron beam emitted from the back of plasma focus devices is being studied as a radiation source for intraoperative radiation therapy applications. A plasma focus device is being developed for this purpose, and there is a need for characterizing its electron beam, particularly, insofar as the energy spectrum is concerned. The instrument used is a magnetic spectrometer. To calibrate this spectrometer, a procedure relying on the energy-range relation in Mylar® has been devised and applied. By measuring the transmission through increasing thicknesses of the material, electron energies could be assessed and compared to the spectrometer readings. Thus, the original calibration of the instrument has been extended to higher energies and also to better accuracy. Methods and results are presented.

Visualizing the 3D Architecture of Multiple Erythrocytes Infected with Plasmodium at Nanoscale by Focused Ion Beam-Scanning Electron Microscopy

PubMed Central

Soares Medeiros, Lia Carolina; De Souza, Wanderley; Jiao, Chengge; Barrabin, Hector; Miranda, Kildare

2012-01-01

Different methods for three-dimensional visualization of biological structures have been developed and extensively applied by different research groups. In the field of electron microscopy, a new technique that has emerged is the use of a focused ion beam and scanning electron microscopy for 3D reconstruction at nanoscale resolution. The higher extent of volume that can be reconstructed with this instrument represent one of the main benefits of this technique, which can provide statistically relevant 3D morphometrical data. As the life cycle of Plasmodium species is a process that involves several structurally complex developmental stages that are responsible for a series of modifications in the erythrocyte surface and cytoplasm, a high number of features within the parasites and the host cells has to be sampled for the correct interpretation of their 3D organization. Here, we used FIB-SEM to visualize the 3D architecture of multiple erythrocytes infected with Plasmodium chabaudi and analyzed their morphometrical parameters in a 3D space. We analyzed and quantified alterations on the host cells, such as the variety of shapes and sizes of their membrane profiles and parasite internal structures such as a polymorphic organization of hemoglobin-filled tubules. The results show the complex 3D organization of Plasmodium and infected erythrocyte, and demonstrate the contribution of FIB-SEM for the obtainment of statistical data for an accurate interpretation of complex biological structures. PMID:22432024

[Swiss surgery: quo vadis? Reader and market analysis for strategic positioning of a specialty journal].

PubMed

Freiermuth, O; Todorov, A; Bolli, M; Heberer, M

2003-01-01

Scientific journals currently face challenges including cost pressures caused by economic constraints, increasing rivalry among competitors, limited market potential of non-english speaking journals, increasing medical specialization with resulting market fragmentation, and internet-based competition. We therefore analyzed strategic opportunities of the journal Swiss Surgery on the basis of customer surveys and of a market analysis. Swiss surgeons expressed their interest in the continuation of the journal but also indicated their support for changes in its concept and for an increased use of electronic media. An international market analysis points-out the difficulties of national, non-english speaking journals in gaining impact points and in attracting authors and readers of scientific medical articles. Therefore, a journal such as Swiss Surgery should identify and use publication niches. The demand for a concept addressing surgical training including continuous postgraduate education was confirmed by the customers of Swiss Surgery. A corresponding offer does not presently exist in the area and could become the new focus of the journal. This change of concept may have a number of consequences: A journal focusing on surgical training and education should use the results of readers' surveys rather than impact point assignment to evaluate quality. The journal should increasingly use electronic services including data bases, pictures, videos and closed user groups to supplement the print version. At short term, however, the printed version should be continued and not be substituted by the electronic version in order to maintain the established brand "Swiss Surgery".

Favorable target positions for intense laser acceleration of electrons in hydrogen-like, highly-charged ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pi, Liang-Wen; Starace, Anthony F.; Kavli Institute for Theoretical Physics, University of California, Santa Barbara, California 93106-4030

2015-09-15

Classical relativistic Monte Carlo simulations of petawatt laser acceleration of electrons bound initially in hydrogen-like, highly-charged ions show that both the angles and energies of the laser-accelerated electrons depend on the initial ion positions with respect to the laser focus. Electrons bound in ions located after the laser focus generally acquire higher (≈GeV) energies and are ejected at smaller angles with respect to the laser beam. Our simulations assume a tightly-focused linearly-polarized laser pulse with intensity approaching 10{sup 22 }W/cm{sup 2}. Up to fifth order corrections to the paraxial approximation of the laser field in the focal region are taken intomore » account. In addition to the laser intensity, the Rayleigh length in the focal region is shown to play a significant role in maximizing the final energy of the accelerated electrons. Results are presented for both Ne{sup 9+} and Ar{sup 17+} target ions.« less

NASA Past, Present, and Future: The Use of Commercial Off The Shelf (COTS) Electronics in Space

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Guertin, Steven M.

2017-01-01

NASA has a long history of using commercial grade electronics in space. In this presentation we will provide a brief history of NASA's trends and approaches to commercial grade electronics focusing on processing and memory systems. This will include providing summary information on the space hazards to electronics as well as NASA mission trade space. We will also discuss developing recommendations for risk management approaches to Electrical, Electronic and Electromechanical (EEE) parts usage in space. Two examples will be provided focusing on a near-earth Polar-orbiting spacecraft as well as a mission to Mars. The final portion will discuss emerging trends impacting usage.

Analysis of Scanned Probe Images for Magnetic Focusing in Graphene

DOE PAGES

Bhandari, Sagar; Lee, Gil-Ho; Kim, Philip; ...

2017-02-21

We have used cooled scanning probe microscopy (SPM) to study electron motion in nanoscale devices. The charged tip of the microscope was raster-scanned at constant height above the surface as the conductance of the device was measured. The image charge scatters electrons away, changing the path of electrons through the sample. Using this technique, we imaged cyclotron orbits that flow between two narrow contacts in the magnetic focusing regime for ballistic hBN–graphene–hBN devices. We present herein an analysis of our magnetic focusing imaging results based on the effects of the tip-created charge density dip on the motion of ballistic electrons.more » The density dip locally reduces the Fermi energy, creating a force that pushes electrons away from the tip. When the tip is above the cyclotron orbit, electrons are deflected away from the receiving contact, creating an image by reducing the transmission between contacts. The data and our analysis suggest that the graphene edge is rather rough, and electrons scattering off the edge bounce in random directions. However, when the tip is close to the edge, it can enhance transmission by bouncing electrons away from the edge, toward the receiving contact. Our results demonstrate that cooled SPM is a promising tool to investigate the motion of electrons in ballistic graphene devices.« less

Monte Carlo simulations of secondary electron emission due to ion beam milling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahady, Kyle; Tan, Shida; Greenzweig, Yuval

We present a Monte Carlo simulation study of secondary electron emission resulting from focused ion beam milling of a copper target. The basis of this study is a simulation code which simulates ion induced excitation and emission of secondary electrons, in addition to simulating focused ion beam sputtering and milling. This combination of features permits the simulation of the interaction between secondary electron emission, and the evolving target geometry as the ion beam sputters material. Previous ion induced SE Monte Carlo simulation methods have been restricted to predefined target geometries, while the dynamic target in the presented simulations makes thismore » study relevant to image formation in ion microscopy, and chemically assisted ion beam etching, where the relationship between sputtering, and its effects on secondary electron emission, is important. We focus on a copper target, and validate our simulation against experimental data for a range of: noble gas ions, ion energies, ion/substrate angles and the energy distribution of the secondary electrons. We then provide a detailed account of the emission of secondary electrons resulting from ion beam milling; we quantify both the evolution of the yield as high aspect ratio valleys are milled, as well as the emission of electrons within these valleys that do not escape the target, but which are important to the secondary electron contribution to chemically assisted ion induced etching.« less

Analysis of Scanned Probe Images for Magnetic Focusing in Graphene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhandari, Sagar; Lee, Gil-Ho; Kim, Philip

We have used cooled scanning probe microscopy (SPM) to study electron motion in nanoscale devices. The charged tip of the microscope was raster-scanned at constant height above the surface as the conductance of the device was measured. The image charge scatters electrons away, changing the path of electrons through the sample. Using this technique, we imaged cyclotron orbits that flow between two narrow contacts in the magnetic focusing regime for ballistic hBN–graphene–hBN devices. We present herein an analysis of our magnetic focusing imaging results based on the effects of the tip-created charge density dip on the motion of ballistic electrons.more » The density dip locally reduces the Fermi energy, creating a force that pushes electrons away from the tip. When the tip is above the cyclotron orbit, electrons are deflected away from the receiving contact, creating an image by reducing the transmission between contacts. The data and our analysis suggest that the graphene edge is rather rough, and electrons scattering off the edge bounce in random directions. However, when the tip is close to the edge, it can enhance transmission by bouncing electrons away from the edge, toward the receiving contact. Our results demonstrate that cooled SPM is a promising tool to investigate the motion of electrons in ballistic graphene devices.« less

Comparison of heavy-ion- and electron-beam upset data for GaAS SRAMS. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flesner, L.D.; Zuleeg, R.; Kolasinski, W.A.

1992-07-16

We report the results of experiments designed to evaluate the extent to which focused electron-beam pulses simulate energetic ion upset phenomena in GaAs memory circuits fabricated by the McDonnell Douglas Astronautics Company. The results of two experimental methods were compared, irradiation by heavy-ion particle beams, and upset mapping using focused electron pulses. Linear energy transfer (LET) thresholds and upset cross sections are derived from the data for both methods. A comparison of results shows good agreement, indicating that for these circuits electron-beam pulse mapping is a viable simulation technique.

Focus groups: a useful tool for curriculum evaluation.

PubMed

Frasier, P Y; Slatt, L; Kowlowitz, V; Kollisch, D O; Mintzer, M

1997-01-01

Focus group interviews have been used extensively in health services program planning, health education, and curriculum planning. However, with the exception of a few reports describing the use of focus groups for a basic science course evaluation and a clerkship's impact on medical students, the potential of focus groups as a tool for curriculum evaluation has not been explored. Focus groups are a valid stand-alone evaluation process, but they are most often used in combination with other quantitative and qualitative methods. Focus groups rely heavily on group interaction, combining elements of individual interviews and participant observation. This article compares the focus group interview with both quantitative and qualitative methods; discusses when to use focus group interviews; outlines a protocol for conducting focus groups, including a comparison of various styles of qualitative data analysis; and offers a case study, in which focus groups evaluated the effectiveness of a pilot preclinical curriculum.

Evidence-based management of ambulatory electronic health record system implementation: an assessment of conceptual support and qualitative evidence.

PubMed

McAlearney, Ann Scheck; Hefner, Jennifer L; Sieck, Cynthia; Rizer, Milisa; Huerta, Timothy R

2014-07-01

While electronic health record (EHR) systems have potential to drive improvements in healthcare, a majority of EHR implementations fall short of expectations. Shortcomings in implementations are often due to organizational issues around the implementation process rather than technological problems. Evidence from both the information technology and healthcare management literature can be applied to improve the likelihood of implementation success, but the translation of this evidence into practice has not been widespread. Our objective was to comprehensively study and synthesize best practices for managing ambulatory EHR system implementation in healthcare organizations, highlighting applicable management theories and successful strategies. We held 45 interviews with key informants in six U.S. healthcare organizations purposively selected based on reported success with ambulatory EHR implementation. We also conducted six focus groups comprised of 37 physicians. Interview and focus group transcripts were analyzed using both deductive and inductive methods to answer research questions and explore emergent themes. We suggest that successful management of ambulatory EHR implementation can be guided by the Plan-Do-Study-Act (PDSA) quality improvement (QI) model. While participants did not acknowledge nor emphasize use of this model, we found evidence that successful implementation practices could be framed using the PDSA model. Additionally, successful sites had three strategies in common: 1) use of evidence from published health information technology (HIT) literature emphasizing implementation facilitators; 2) focusing on workflow; and 3) incorporating critical management factors that facilitate implementation. Organizations seeking to improve ambulatory EHR implementation processes can use frameworks such as the PDSA QI model to guide efforts and provide a means to formally accommodate new evidence over time. Implementing formal management strategies and incorporating new evidence through the PDSA model is a key element of evidence-based management and a crucial way for organizations to position themselves to proactively address implementation and use challenges before they are exacerbated. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Electronic Interactions of n-Doped Perylene Diimide Groups Appended to Polynorbornene Chains: Implications for Electron Transport in Organic Electronics.

PubMed

Nguyen, Minh T; Biberdorf, Joshua D; Holliday, Bradley J; Jones, Richard A

2017-11-01

A polymer consisting of a polynorbornene backbone with perylene diimide (PDI) pendant groups on each monomeric unit is synthesized via ring opening metathesis polymerization. The PDI pendant groups along the polymer backbone, studied by UV-vis absorption, fluorescence emission, and electron paramagnetic resonance spectroscopy in addition to electrochemical methods, show evidence of molecular aggregation and corresponding electronic coupling with neighboring groups, which forms pathways for efficient electron transport from one group to another in a specific reduced form. When n-doped, the title polymer shows redox conductivity of 5.4 × 10 -3 S cm -1 , comparable with crystalline PDI materials, and is therefore a promising material for use in organic electronics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Improving extreme-scale problem solving: assessing electronic brainstorming effectiveness in an industrial setting.

PubMed

Dornburg, Courtney C; Stevens, Susan M; Hendrickson, Stacey M L; Davidson, George S

2009-08-01

An experiment was conducted to compare the effectiveness of individual versus group electronic brainstorming to address difficult, real-world challenges. Although industrial reliance on electronic communications has become ubiquitous, empirical and theoretical understanding of the bounds of its effectiveness have been limited. Previous research using short-term laboratory experiments have engaged small groups of students in answering questions irrelevant to an industrial setting. The present experiment extends current findings beyond the laboratory to larger groups of real-world employees addressing organization-relevant challenges during the course of 4 days. Employees and contractors at a national laboratory participated, either in a group setting or individually, in an electronic brainstorm to pose solutions to a real-world problem. The data demonstrate that (for this design) individuals perform at least as well as groups in producing quantity of electronic ideas, regardless of brainstorming duration. However, when judged with respect to quality along three dimensions (originality, feasibility, and effectiveness), the individuals significantly (p < .05) outperformed the group. When quality is used to benchmark success, these data indicate that work-relevant challenges are better solved by aggregating electronic individual responses rather than by electronically convening a group. This research suggests that industrial reliance on electronic problem-solving groups should be tempered, and large nominal groups may be more appropriate corporate problem-solving vehicles.

Low-Energy Plasma Focus Device as an Electron Beam Source

PubMed Central

Seong Ling, Yap; Naresh Kumar, Nitturi; Lian Kuang, Lim; Chiow San, Wong

2014-01-01

A low-energy plasma focus device was used as an electron beam source. A technique was developed to simultaneously measure the electron beam intensity and energy. The system was operated in Argon filling at an optimum pressure of 1.7 mbar. A Faraday cup was used together with an array of filtered PIN diodes. The beam-target X-rays were registered through X-ray spectrometry. Copper and lead line radiations were registered upon usage as targets. The maximum electron beam charge and density were estimated to be 0.31 μC and 13.5 × 1016/m3, respectively. The average energy of the electron beam was 500 keV. The high flux of the electron beam can be potentially applicable in material sciences. PMID:25544952

Transparent oxygen and water vapor barriers for flexible electronics using semi-crystalline polymer matrix thin films

NASA Astrophysics Data System (ADS)

Sehgal, Akhil

Electronic components such as organic light emitting diodes (OLED) and photo-voltaics have been of more focus with the advancement of technology. These electronics are susceptible to degradable in the presence of gases such as water vapor and oxygen. Being that these gases are constituents of the atmosphere and can be found in nearly every environment, certain protocols must take place to mitigate the issues that occur. New generation electronics are sensitive to oxidation and corrosion in the presence of extremely low concentrations of moisture and oxygen and therefore the development and improvements of gas barriers are vital for advancements in electronics technology. The improvements of appliances such as flexible solar cells and OLEDs require barriers that need to be flexible in order to achieve high longevity. The area of research has been focused on designing flexible polymer films with composite nanoparticles and cross-linking agents that have low permeability to moisture and oxygen gas. The polymers studied are in the family of methacrylates. Due to the properties of methacrylate polymers, it has been proposed that they are capable of having efficient barrier properties due to their ability to cross link and form crystalline structures with low chain mobility. The change in intensities of the FTIR peaks of different functional groups indicates the cross-linking and crystallinity of the polymer films. The UV-Vis data indicates high transparency of the films. SEM images of the films show continuous and well cured surfaces with minimal deviations, pores and defects. The addition of cross-linking agents and nanoparticles increased polymerization and cross-linking of the methacrylate polymer chains, therefore increasing inter-chain density and long range order. The incorporation of these additives increased the crystallinity of the films and by decreasing the distances and number of voids between polymer chains along with having minimal sorption sites for gases to bond to, the ability of gases such as moisture and oxygen to penetrate through the films has decreased.

Focus group discussion in built environment qualitative research practice

NASA Astrophysics Data System (ADS)

Omar, D.

2018-02-01

Focus groups discussion is a useful way in built environment for qualitative research practice. Drawing upon recent reviews of focus group discussion and examples of how focus group discussions have been used by researchers and educators, this paper provides what actually happens in focus group discussion as practiced. There is difference between group of people and topic of interest. This article examines the focus group discussions as practiced in built environment. Thus, there is broad form of focus group discussions as practiced in built environment and the applications are varied.

X-ray emission from high temperature plasmas

NASA Technical Reports Server (NTRS)

Harries, W. L.

1975-01-01

The bremsstrahlung X-rays from a plasma focus device were investigated with emphasis on the emission versus position, time, energy, and angle of emission. It is shown that low energy X-rays come from the plasma focus region, but that the higher energy components come from the anode. The emission is anisotropic, the low energy polar diagram resembling a cardioid, while the high energy emission is a lobe into the anode. The plasma parameters were considered indicating that even in the dense focus, the plasma is collisionless near the axis. By considering the radiation patterns of relativistic electrons a qualitative picture is obtained, which explains the measured polar diagrams, assuming the electrons that produce the X-rays have velocity vectors lying roughly in a cone between the point of focus and the anode. The average electron energy is about 3keV at the focus and about 10 keV on the anode surface. Results are consistent with the converging beam model of neutron production.

Graphene-based organic-inorganic hybrids with optoelectronic and magneto-optic functions (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lee, Kwang-Sup; Kim, Sung-Hyun; Jung, Juhyoung; Teng, Xue-Cheng; Prabhakaran, Prem

2017-02-01

Groups around the world are pursuing optoelctronic and magneto-optic properties of graphene-based materials since they hold a lot of promise for future technologies. Quantum dot (QD) decorated graphenic nanohybrids can be candidates for demonstrating energy transfer, while magnetic nanoparticles (MNPs) on graphene give rise to interesting electronic phenomena like magneto-optical effects. Graphene containing MNPs are also good candidates for exploring quantum-hall effect. In medicine these materials have demonstrated applications in bioimaging, drug delivery, photothermal treatment and magnetic resonance imaging. A majority of groups working on QD or MNPs have focused on chemical functionalization methods for making graphene-MNP nanohybrids. We have developed a set of small molecule as well as polymeric ligands for noncovalent self-assembly of nanoparticles on graphene. The ligands contain pyrene as an anchor group for graphene and also thiol or dipamine as anchor groups for QD or MNPs. In this presentation we discuss the synthesis and characterization of these materials and outline some early results regarding exploratory device fabrication involving these materials.

Flexible high-voltage supply for experimental electron microscope

NASA Technical Reports Server (NTRS)

Chapman, G. L.; Jung, E. A.; Lewis, R. N.; Van Loon, L. S.; Welter, L. M.

1969-01-01

Scanning microscope uses a field-emission tip for the electron source, an electron gun that simultaneously accelerates and focuses electrons from the source, and one auxiliary lens to produce a final probe size at the specimen on the order of angstroms.

Sextupole system for the correction of spherical aberration

DOEpatents

Crewe, A.V.; Kopf, D.A.

In an electron beam device in which an electron beam is developed and then focused by a lens to a particular spot, there is provided a means for eliminating spherical aberration. A sextupole electromagnetic lens is positioned between two focusing lenses. The interaction of the sextupole with the beam compensates for spherical aberration. (GHT)

Imaging electron motion in graphene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhandari, Sagar; Westervelt, Robert M.

A cooled scanning probe microscope (SPM) is an ideal tool to image electronic motion in graphene: the SPM tip acts as a scanning gate, which interacts with the electron gas below. We introduce the technique using our group's previous work on imaging electron flow from a quantum point contact in a GaAs 2DEG and tuning an InAs quantum dot in an InAs/InP nanowire. Carriers in graphene have very different characteristics: electrons and holes travel at a constant speed with no bandgap, and they pass through potential barriers via Klein tunneling. In this paper, we review the extension of SPM imagingmore » techniques to graphene. We image the cyclotron orbits passing between two narrow contacts in a single-atomic-layer graphene device in a perpendicular magnetic field. Magnetic focusing produces a peak in transmission between the contacts when the cyclotron diameter is equal to the contact spacing. The charged SPM tip deflects electrons passing from one contact to the other, changing the transmission when it interrupts the flow. By displaying the change in transmission as the tip is raster scanned above the sample, an image of flow is obtained. In addition, we have developed a complementary technique to image electronic charge using a cooled scanning capacitance microscope (SCM) that uses a sensitive charge preamplifier near the SPM tip to achieve a charge noise level 0.13 e Hz -1/2 with high spatial resolution 100 nm. The cooled SPM and SCM can be used to probe the motion of electrons on the nanoscale in graphene devices.« less

Imaging electron motion in graphene

DOE PAGES

Bhandari, Sagar; Westervelt, Robert M.

2017-01-05

A cooled scanning probe microscope (SPM) is an ideal tool to image electronic motion in graphene: the SPM tip acts as a scanning gate, which interacts with the electron gas below. We introduce the technique using our group's previous work on imaging electron flow from a quantum point contact in a GaAs 2DEG and tuning an InAs quantum dot in an InAs/InP nanowire. Carriers in graphene have very different characteristics: electrons and holes travel at a constant speed with no bandgap, and they pass through potential barriers via Klein tunneling. In this paper, we review the extension of SPM imagingmore » techniques to graphene. We image the cyclotron orbits passing between two narrow contacts in a single-atomic-layer graphene device in a perpendicular magnetic field. Magnetic focusing produces a peak in transmission between the contacts when the cyclotron diameter is equal to the contact spacing. The charged SPM tip deflects electrons passing from one contact to the other, changing the transmission when it interrupts the flow. By displaying the change in transmission as the tip is raster scanned above the sample, an image of flow is obtained. In addition, we have developed a complementary technique to image electronic charge using a cooled scanning capacitance microscope (SCM) that uses a sensitive charge preamplifier near the SPM tip to achieve a charge noise level 0.13 e Hz -1/2 with high spatial resolution 100 nm. The cooled SPM and SCM can be used to probe the motion of electrons on the nanoscale in graphene devices.« less

A vacuum-sealed compact x-ray tube based on focused carbon nanotube field-emission electrons

NASA Astrophysics Data System (ADS)

Jeong, Jin-Woo; Kim, Jae-Woo; Kang, Jun-Tae; Choi, Sungyoul; Ahn, Seungjoon; Song, Yoon-Ho

2013-03-01

We report on a fully vacuum-sealed compact x-ray tube based on focused carbon nanotube (CNT) field-emission electrons for various radiography applications. The specially designed two-step brazing process enabled us to accomplish a good vacuum level for the stable and reliable operation of the x-ray tube without any active vacuum pump. Also, the integrated focusing electrodes in the field-emission electron gun focused electron beams from the CNT emitters onto the anode target effectively, giving a small focal spot of around 0.3 mm with a large current of above 50 mA. The active-current control through the cathode electrode of the x-ray tube led a fast digital modulation of x-ray dose with a low voltage of below 5 V. The fabricated compact x-ray tube showed a stable and reliable operation, indicating good maintenance of a vacuum level of below 5 × 10-6 Torr and the possibility of field-emission x-ray tubes in a stand-alone device without an active pumping system.

Unblocking brainstorms.

PubMed

Gallupe, R B; Bastianutti, L M; Cooper, W H

1991-02-01

Brainstorming groups have consistently produced fewer ideas than have the equivalent number of individuals working by themselves. These results have been attributed to social loafing, evaluation apprehension, and production blocking in groups. In this study, a new brainstorming technique--electronic brainstorming--that may reduce both production blocking and evaluation apprehension was assessed. Electronic and nonelectronic groups and nominal and interacting groups were compared in a 2 x 2 factorial design. Electronic groups were more productive than nonelectronic groups, but the productivity of nominal and interacting groups did not differ. In contrast, interacting groups felt better about the idea-generation process than did nominal groups. Ways in which electronic brainstorming can reopen a long dormant area of research and application are discussed.

Excess electrons in reduced rutile and anatase TiO2

NASA Astrophysics Data System (ADS)

Yin, Wen-Jin; Wen, Bo; Zhou, Chuanyao; Selloni, Annabella; Liu, Li-Min

2018-05-01

As a prototypical photocatalyst, TiO2 is a material of scientific and technological interest. In photocatalysis and other applications, TiO2 is often reduced, behaving as an n-type semiconductor with unique physico-chemical properties. In this review, we summarize recent advances in the understanding of the fundamental properties and applications of excess electrons in reduced, undoped TiO2. We discuss the characteristics of excess electrons in the bulk and at the surface of rutile and anatase TiO2 focusing on their localization, spatial distribution, energy levels, and dynamical properties. We examine specific features of the electronic states for photoexcited TiO2, for intrinsic oxygen vacancy and Ti interstitial defects, and for surface hydroxyls. We discuss similarities and differences in the behaviors of excess electrons in the rutile and anatase phases. Finally, we consider the effect of excess electrons on the reactivity, focusing on the interaction between excess electrons and adsorbates.

Phase space manipulation in high-brightness electron beams

NASA Astrophysics Data System (ADS)

Rihaoui, Marwan M.

Electron beams have a wide range of applications, including discovery science, medicine, and industry. Electron beams can also be used to power next-generation, high-gradient electron accelerators. The performances of some of these applications could be greatly enhanced by precisely tailoring the phase space distribution of the electron beam. The goal of this dissertation is to explore some of these phase space manipulations. We especially focus on transformations capable of tailoring the beam current distribution. Specifically, we investigate a beamline exchanging phase space coordinates between the horizontal and longitudinal degrees of freedom. The key components necessary for this beamline were constructed and tested. The preliminary beamline was used as a singleshot phase space diagnostics and to produce a train of picoseconds electron bunches. We also investigate the use of multiple electron beams to control the transverse focusing. Our numerical and analytical studies are supplemented with experiments performed at the Argonne Wakefield Accelerator.

Microscopic structure and properties changes of cassava stillage residue pretreated by mechanical activation.

PubMed

Liao, Zhengda; Huang, Zuqiang; Hu, Huayu; Zhang, Yanjuan; Tan, Yunfang

2011-09-01

This study has focused on the pretreatment of cassava stillage residue (CSR) by mechanical activation (MA) using a self-designed stirring ball mill. The changes in surface morphology, functional groups and crystalline structure of pretreated CSR were examined by using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) under reasonable conditions. The results showed that MA could significantly damage the crystal structure of CSR, resulting in the variation of surface morphology, the increase of amorphous region ratio and hydrogen bond energy, and the decrease in crystallinity and crystalline size. But no new functional groups generated during milling, and the crystal type of cellulose in CSR still belonged to cellulose I after MA. Copyright © 2011 Elsevier Ltd. All rights reserved.

Discovery of Implementation Factors That Lead to Technology Adoption in Long-Term Care.

PubMed

Schoville, Rhonda R

2017-10-01

The current exploratory, qualitative study discovered and clarified implementation factors that led to technology adoption in long-term care (LTC). The Integrated Technology Implementation model guided the study of an electronic health record used in three LTC settings. Thirty key stakeholders (i.e., directors of nursing, nurses, and certified nurse aides) participated in focus groups or interviews. Findings indicated experiences were more similar than different among groups and facilities. Five major implementation themes supported by a variety of minor themes were identified. Implications for nursing include that leaders must be knowledgeable and committed to the change and engage staff throughout the implementation process. In addition, various communication and education strategies are required. [Journal of Gerontological Nursing, 43(10), 21-26.]. Copyright 2017, SLACK Incorporated.

Electronic Journal Market Overview in 1997: Part 1--The Publishers.

ERIC Educational Resources Information Center

Machovec, George S.

1997-01-01

Provides an overview of the electronic journal market and focuses on publishers doing innovative projects. Discusses predominate market models; publishers and the Internet; issues surrounding electronic journals: pricing, security, electronic page layout, copyright, backfile availability, reliability, and accessibility. Highlights selected…

Electron (charge) density studies of cellulose models

USDA-ARS?s Scientific Manuscript database

Introductory material first describes electron density approaches and demonstrates visualization of electron lone pairs and bonding as concentrations of electron density. Then it focuses on the application of Bader’s Quantum Theory of Atoms-in-Molecules (AIM) to cellulose models. The purpose of the ...

Electron Lens Construction for the Integrable Optics Test Accelerator at Fermilab

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGee, Mike; Carlson, Kermit; Nobrega, Lucy

The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p⁺) diagnostic test ring. Construction of an electron lens for IOTA is necessary for both electron and proton operation. Components required for the Electron Lens design include; a 0.8 T conventional water-cooled main solenoid, and magnetic bending and focusing elements. The foundation of the design relies on repurposing the Fermilab Tevatron Electron Lens II (TELII)more » gun and collector under ultra-high vacuum (UHV) conditions.« less

Three-dimensional imaging of adherent cells using FIB/SEM and STEM.

PubMed

Villinger, Clarissa; Schauflinger, Martin; Gregorius, Heiko; Kranz, Christine; Höhn, Katharina; Nafeey, Soufi; Walther, Paul

2014-01-01

In this chapter we describe three different approaches for three-dimensional imaging of electron microscopic samples: serial sectioning transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) tomography, and focused ion beam/scanning electron microscopy (FIB/SEM) tomography. With these methods, relatively large volumes of resin-embedded biological structures can be analyzed at resolutions of a few nm within a reasonable expenditure of time. The traditional method is serial sectioning and imaging the same area in all sections. Another method is TEM tomography that involves tilting a section in the electron beam and then reconstruction of the volume by back projection of the images. When the scanning transmission (STEM) mode is used, thicker sections (up to 1 μm) can be analyzed. The third approach presented here is focused ion beam/scanning electron microscopy (FIB/SEM) tomography, in which a sample is repeatedly milled with a focused ion beam (FIB) and each newly produced block face is imaged with the scanning electron microscope (SEM). This process can be repeated ad libitum in arbitrary small increments allowing 3D analysis of relatively large volumes such as eukaryotic cells. We show that resolution of this approach is considerably improved when the secondary electron signal is used. However, the most important prerequisite for three-dimensional imaging is good specimen preparation. For all three imaging methods, cryo-fixed (high-pressure frozen) and freeze-substituted samples have been used.

Development of GEM detector for plasma diagnostics application: simulations addressing optimization of its performance

NASA Astrophysics Data System (ADS)

Chernyshova, M.; Malinowski, K.; Kowalska-Strzęciwilk, E.; Czarski, T.; Linczuk, P.; Wojeński, A.; Krawczyk, R. D.

2017-12-01

The advanced Soft X-ray (SXR) diagnostics setup devoted to studies of the SXR plasma emissivity is at the moment a highly relevant and important for ITER/DEMO application. Especially focusing on the energy range of tungsten emission lines, as plasma contamination by W and its transport in the plasma must be understood and monitored for W plasma-facing material. The Gas Electron Multiplier, with a spatial and energy-resolved photon detecting chamber, based SXR radiation detection system under development by our group may become such a diagnostic setup considering and solving many physical, technical and technological aspects. This work presents the results of simulations aimed to optimize a design of the detector's internal chamber and its performance. The study of the effect of electrodes alignment allowed choosing the gap distances which maximizes electron transmission and choosing the optimal magnitudes of the applied electric fields. Finally, the optimal readout structure design was identified suitable to collect a total formed charge effectively, basing on the range of the simulated electron cloud at the readout plane which was in the order of ~ 2 mm.

Perceptions of Electronic Cigarettes Among Medicaid-Eligible Pregnant and Postpartum Women.

PubMed

Fallin, Amanda; Miller, Alana; Assef, Sara; Ashford, Kristin

2016-01-01

To describe perceptions and beliefs about electronic cigarette (e-cigarette) use during pregnancy among pregnant and newly postpartum women. An exploratory, qualitative descriptive study. University-affiliated prenatal clinics. Twelve pregnant or recently postpartum women who reported use of tobacco and electronic cigarettes. Semistructured focus groups were audio recorded and professionally transcribed. The transcripts were coded to consensus and analyzed with MAXQDA software (version 11) using content analysis. Four overarching themes emerged: (a) Attraction to E-Cigarettes as a Harm Reduction Strategy, (b) Uncertainty Regarding the Health Effects of E-Cigarettes; (c) Ambivalence Regarding Novel Product Characteristics; and (d) Behaviors Reflected Dual Use and Often Complete Relapse to Traditional Cigarettes. Pregnant women are initially attracted to e-cigarettes as a harm reduction strategy, but they often return to traditional cigarettes in the postpartum period. Nurses should counsel pregnant women on the adverse effects of fetal exposure to nicotine. Evidence-based nursing interventions are needed to prevent relapse during the postpartum period. Copyright © 2016 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

X-ray imaging spectroscopic diagnostics on Nike

NASA Astrophysics Data System (ADS)

Aglitskiy, Y.; Karasik, M.; Serlin, V.; Weaver, J. L.; Oh, J.; Obenschain, S. P.; Ralchenko, Yu.

2017-10-01

Electron temperature and density diagnostics of the laser plasma produced within the focal spot of the NRL's Nike laser are being explored with the help of X-ray imaging spectroscopy. Spectra of He-like and H-like ions were taken by Nike focusing spectrometers in a range of lower (1.8 kev, Si XIV) and higher (6.7 kev, Fe XXV) x-ray energies. Data that were obtained with spatial resolution were translated into the temperature and density as functions of distance from the target. As an example electron density was determined from He-like satellites to Ly-alpha in Si XIV. The dielectronic satellites with intensity ratios that are sensitive to collisional transfer of population between different triplet groups of double-excited states 2l2l' in Si XIII were observed with high spatial and spectral resolution Lineouts taken at different axial distances from the planar Si target show changing spectral shapes due to the different electron densities as determined by supporting non-LTE simulations. These shapes are relatively insensitive to the plasma temperature which was measured using different spectral lines. This work was supported by the US DOE/NNSA.

Comparison of porcelain bond strength of different metal frameworks prepared by using conventional and recently introduced fabrication methods.

PubMed

Kaleli, Necati; Saraç, Duygu

2017-07-01

Most studies evaluating dental laser sintering systems have focused on the marginal accuracy of the restorations. However, the bond strength at the metal-ceramic interface is another important factor that affects the survival of restorations, and currently, few studies focus on this aspect. The purpose of this in vitro study was to compare the porcelain bond strength of cobalt-chromium (Co-Cr) metal frameworks prepared by using the conventional lost-wax technique, milling, direct metal laser sintering (DMLS), and laser cusing, a direct process powder-bed system. A total of 96 metal frameworks (n=24 in each group) were prepared by using conventional lost-wax (group C), milling (group M), DMLS (group LS), and direct process powder-bed (group LC) methods according to International Organization for Standardization standard ISO 9693-1. After porcelain application, a 3-point bend test was applied to each specimen by using a universal testing machine. Data were statistically analyzed using 1-way ANOVA and Tukey honest significant difference tests (α=.05). Failure types at the metal-ceramic interfaces were examined using stereomicroscopy. Additionally, 1 specimen from each group was prepared for scanning electron microscopy analysis to evaluate the surface topography of metal frameworks. The mean bond strength was 38.08 ±3.82 MPa for group C, 39.29 ±3.51 MPa for group M, 40.73 ±3.58 MPa for group LS, and 41.24 ±3.75 MPa for group LC. Statistically significant differences were observed among the 4 groups (P=.016). All groups, except for LS, exhibited adhesive and mixed type bond failure. Both of the laser sintering methods were found to be successful in terms of metal-ceramic bond strength. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Importance of interlayer H bonding structure to the stability of layered minerals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conroy, Michele; Soltis, Jennifer A.; Wittman, Rick S.

2017-10-16

The exact atomic structures of layered minerals have been difficult to characterize because the layers often possess out-of-plane hydrogen atoms that cannot be detected by many analytical techniques. However, the ordering of these bonds are thought to play a fundamental role in the structural stability and solubility of layered minerals. We report a new strategy of using the intense radiation field of a focused electron beam to probe the effect of differences in hydrogen bonding networks on mineral solubility while simultaneously imaging the dissolution behavior in real time via liquid cell electron microscopy. We show the loss in hydrogens frommore » interlayers of boehmite (γ-AlOOH) resulted in 2D nanosheets exfoliating from the bulk that subsequently and rapidly dissolved. However gibbsite (γ-Al(OH)3), with its higher concentration of OH terminating groups, was more accommodating to the deprotonation and stable under the beam.« less

An electronic patient risk communication board.

PubMed

Ohashi, Kumiko; Caligtan, Christine A; Benoit, Angela N; Breydo, Eugene M; Carroll, Diane L; Keohane, Carol A; Bates, David W; Dykes, John S; Dykes, Patricia C

2012-01-01

Communication failures have been identified as the root cause of the majority of medical malpractice claims and patient safety violations. We believe it is essential to share key patient risk information with healthcare team members at the patient's bedside. In this study, we developed an electronic Patient Risk Communication Board (ePRCB) to assist in bridging the communication gap between all health care team members. The goal of the ePRCB is to effectively communicate the patient's key risk factors, such as a fall risk or risk of aspiration, to the healthcare team and to reduce adverse events caused by communication failures. The ePRCB will transmit patient risk information and tailored interventions with easy-to-understand icons on an LCD screen at the point of care. A set of patient risk reminder icons was developed and validated by focus groups. We used the results of the evaluation to refine the icons for the ePRCB.

An Electronic Patient Risk Communication Board

PubMed Central

Ohashi, Kumiko; Caligtan, Christine A.; Benoit, Angela N.; Breydo, Eugene M.; Carroll, Diane L.; Keohane, Carol A.; Bates, David W.; Dykes, John S.; Dykes, Patricia C.

2012-01-01

Communication failures have been identified as the root cause of the majority of medical malpractice claims and patient safety violations. We believe it is essential to share key patient risk information with healthcare team members at the patient’s bedside. In this study, we developed an electronic Patient Risk Communication Board (ePRCB) to assist in bridging the communication gap between all health care team members. The goal of the ePRCB is to effectively communicate the patient’s key risk factors, such as a fall risk or risk of aspiration, to the healthcare team and to reduce adverse events caused by communication failures. The ePRCB will transmit patient risk information and tailored interventions with easy-to-understand icons on an LCD screen at the point of care. A set of patient risk reminder icons was developed and validated by focus groups. We used the results of the evaluation to refine the icons for the ePRCB. PMID:24199109

A new method to derive electronegativity from resonant inelastic x-ray scattering.

PubMed

Carniato, S; Journel, L; Guillemin, R; Piancastelli, M N; Stolte, W C; Lindle, D W; Simon, M

2012-10-14

Electronegativity is a well-known property of atoms and substituent groups. Because there is no direct way to measure it, establishing a useful scale for electronegativity often entails correlating it to another chemical parameter; a wide variety of methods have been proposed over the past 80 years to do just that. This work reports a new approach that connects electronegativity to a spectroscopic parameter derived from resonant inelastic x-ray scattering. The new method is demonstrated using a series of chlorine-containing compounds, focusing on the Cl 2p(-1)LUMO(1) electronic states reached after Cl 1s → LUMO core excitation and subsequent KL radiative decay. Based on an electron-density analysis of the LUMOs, the relative weights of the Cl 2p(z) atomic orbital contributing to the Cl 2p(3/2) molecular spin-orbit components are shown to yield a linear electronegativity scale consistent with previous approaches.

Trajectories of high energy electrons in a plasma focus

NASA Technical Reports Server (NTRS)

Harries, W. L.; Lee, J. H.; Mcfarland, D. R.

1978-01-01

Measurements are made of high-energy electron trajectories in a plasma focus as functions of position, time, energy, and angle of emission. The spatial resolution of the X-ray emission shows that low-energy X-rays are emitted from the anode surface. It is also suggested that the highest energy X-rays originate from a small region on the axis. The so-called shadow technique shows that the electron beam is perpendicular to the anode surface. Polar diagrams of medium and high-energy X-rays agree with the bremsstrahlung emission from a relativistic electron beam, the current of which is several 100 A.

Electronic scattering, focusing, and resonance by a spherical barrier in Weyl semimetals

NASA Astrophysics Data System (ADS)

Lu, Ming; Zhang, Xiao-Xiao

2018-05-01

We solve the Weyl electron scattered by a spherical step potential barrier. Tuning the incident energy and the potential radius, one can enter both quasiclassical and quantum regimes. Transport features related to far-field currents and integrated cross sections are studied to reveal the preferred forward scattering. In the quasiclassical regime, a strong focusing effect along the incident spherical axis is found in addition to optical caustic patterns. In the quantum regime, at energies of successive angular momentum resonances, a polar aggregation of electron density is found inside the potential. The findings will be useful in transport studies and electronic lens applications in Weyl systems.

An Electro-Optic Spatial Light Modulator for Thermoelastic Generation of Programmably Focused Ultrasound.

DTIC Science & Technology

1984-12-01

The concept proposed is an electro - optic technique that would make it possible to spatially modulate a high power pulsed laser beam to thermoelastically induce focused ultrasound in a test material. Being a purely electro - optic device, the modulator, and therefore the depth at which the acoustic focus occurs, can be programmed electronically at electronic speeds. If successful, it would become possible to scan ultrasound continuously in three dimensions within the component or structure under test. (Author)

Foil focusing of relativistic electron beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekdahl, Jr., Carl August

2017-10-26

When an intense relativistic electron beams (IREB) passes through a grounded metal foil, the transverse electric field due to the beam space charge is locally shorted out, and the beam is focused by the magnetic field of its current. The effect can be treated as focusing by a thin lens with first order aberration. Expressions for the focal length and aberration coefficient of the equivalent thin lens are developed in this note. These are then applied to practical examples representative of IREB research at Los Alamos National Laboratory.

An electro-optic spatial light modulator for thermoelastic generation of programmably focused ultrasound

NASA Astrophysics Data System (ADS)

1984-12-01

The concept proposed is an electro-optic technique that would make it possible to spatially modulate a high power pulsed laser beam to thermoelastically induce focused ultrasound in a test material. Being a purely electro-optic device, the modulator, and therefore the depth at which the acoustic focus occurs, can be programmed electronically at electronic speeds. If successful, it would become possible to scan ultrasound continuously in three dimensions within the component or structure under test.

Destructive effect of HIFU on rabbit embedded endometrial carcinoma tissues and their vascularities

PubMed Central

Guan, Liming; Xu, Gang

2017-01-01

Objectives To evaluate damage effect of High-intensity focused ultrasound on early stage endometrial cancer tissues and their vascularities. Materials and Methods Rabbit endometrial cancer models were established via tumor blocks implantation for a prospective control study. Ultrasonic ablation efficacy was evaluated by pathologic and imaging changes. The target lesions of experimental rabbits before and after ultrasonic ablation were observed after autopsy. The slides were used for hematoxylin-eosin staining, elastic fiber staining and endothelial cell staining; the slides were observed by optical microscopy. One slide was observed by electron microscopy. Then the target lesions of experimental animals with ultrasonic ablation were observed by vascular imaging, one group was visualized by digital subtract angiography, one group was quantified by color Doppler flow imaging, and one group was detected by dye perfusion. SPSS 19.0 software was used for statistical analyses. Results Histological examination indicated that High-intensity focused ultrasound caused the tumor tissues and their vascularities coagulative necrosis. Tumor vascular structure components including elastic fiber, endothelial cells all were destroyed by ultrasonic ablation. Digital subtract angiography showed tumor vascular shadow were dismissed after ultrasonic ablation. After ultrasonic ablation, gray-scale of tumor nodules enhanced in ultrasonography, tumor peripheral and internal blood flow signals disappeared or significantly reduced in color Doppler flow imaging. Vascular perfusion performed after ultrasonic ablation, tumor vessels could not filled by dye liquid. Conclusion High-intensity focused ultrasound as a noninvasive method can destroy whole endometrial cancer cells and their supplying vascularities, which maybe an alternative approach of targeted therapy and new antiangiogenic strategy for endometrial cancer. PMID:28121624

Destructive effect of HIFU on rabbit embedded endometrial carcinoma tissues and their vascularities.

PubMed

Guan, Liming; Xu, Gang

2017-03-21

To evaluate damage effect of High-intensity focused ultrasound on early stage endometrial cancer tissues and their vascularities. Rabbit endometrial cancer models were established via tumor blocks implantation for a prospective control study. Ultrasonic ablation efficacy was evaluated by pathologic and imaging changes. The target lesions of experimental rabbits before and after ultrasonic ablation were observed after autopsy. The slides were used for hematoxylin-eosin staining, elastic fiber staining and endothelial cell staining; the slides were observed by optical microscopy. One slide was observed by electron microscopy. Then the target lesions of experimental animals with ultrasonic ablation were observed by vascular imaging, one group was visualized by digital subtract angiography, one group was quantified by color Doppler flow imaging, and one group was detected by dye perfusion.SPSS 19.0 software was used for statistical analyses. Histological examination indicated that High-intensity focused ultrasound caused the tumor tissues and their vascularities coagulative necrosis. Tumor vascular structure components including elastic fiber, endothelial cells all were destroyed by ultrasonic ablation. Digital subtract angiography showed tumor vascular shadow were dismissed after ultrasonic ablation. After ultrasonic ablation, gray-scale of tumor nodules enhanced in ultrasonography, tumor peripheral and internal blood flow signals disappeared or significantly reduced in color Doppler flow imaging. Vascular perfusion performed after ultrasonic ablation, tumor vessels could not filled by dye liquid. High-intensity focused ultrasound as a noninvasive method can destroy whole endometrial cancer cells and their supplying vascularities, which maybe an alternative approach of targeted therapy and new antiangiogenic strategy for endometrial cancer.

Exploring Innovative Approaches and Patient-Centered Outcomes from Positive Outliers in Childhood Obesity

PubMed Central

Sharifi, Mona; Marshall, Gareth; Goldman, Roberta; Rifas-Shiman, Sheryl L; Horan, Christine M; Koziol, Renata; Marshall, Richard; Sequist, Thomas D; Taveras, Elsie M

2015-01-01

Objective New approaches for obesity prevention and management can be gleaned from 'positive outliers', i.e., individuals who have succeeded in changing health behaviors and reducing their body mass index (BMI) in the context of adverse built and social environments. We explored perspectives and strategies of parents of positive outlier children living in high risk neighborhoods. Methods We collected up to five years of height/weight data from the electronic health records of 22,443 Massachusetts children, ages 6-12 years, seen for well-child care. We identified children with any history of BMI ≥95th percentile (n=4007) and generated a BMI z-score slope for each child using a linear mixed effects model. We recruited parents for focus groups from the sub-sample of children with negative slopes who also lived in zip codes where >15% of children were obese. We analyzed focus group transcripts using an immersion/crystallization approach. Results We reached thematic saturation after 5 focus groups with 41 parents. Commonly cited outcomes that mattered most to parents and motivated change were child inactivity, above-average clothing sizes, exercise intolerance, and negative peer interactions; few reported BMI as a motivator. Convergent strategies among positive outlier families were family-level changes, parent modeling, consistency, household rules/limits, and creativity in overcoming resistance. Parents voiced preferences for obesity interventions that include tailored education and support that extend outside clinical settings and are delivered by both health care professionals and successful peers. Conclusions Successful strategies learned from positive outlier families can be generalized and tested to accelerate progress in reducing childhood obesity. PMID:25439163

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective

PubMed Central

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-01-01

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study. PMID:28347078

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective.

PubMed

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-09-07

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

Evaluation results of xTCA equipment for HEP experiments at CERN

NASA Astrophysics Data System (ADS)

Di Cosmo, M.; Bobillier, V.; Haas, S.; Joos, M.; Mico, S.; Vasey, F.; Vichoudis, P.

2013-12-01

The MicroTCA and AdvancedTCA industry standards are candidate modular electronic platforms for the upgrade of the current generation of high energy physics experiments. The PH-ESE group at CERN launched in 2011 the xTCA evaluation project with the aim of performing technical evaluations and eventually providing support for commercially available components. Different devices from different vendors have been acquired, evaluated and interoperability tests have been performed. This paper presents the test procedures and facilities that have been developed and focuses on the evaluation results including electrical, thermal and interoperability aspects.

Observations of radiation damage and recovery in ammonia targets

NASA Astrophysics Data System (ADS)

McKee, P. M.

2004-06-01

The Polarized Target Group at the University of Virginia has conducted experiments at both the Stanford Linear Accelerator Center (SLAC) and the Thomas Jefferson National Accelerator Facility (JLab) in which a high-intensity (100 nA) electron beam was focused on a polarized target of solid ammonia and/ or solid, deuterated ammonia. Analysis of the target polarization data have revealed several unique characteristics of ammonia. Topics discussed include the rate of polarization decay with accumulated charge, methods of recovering polarization through target annealing and damage-induced shifts in the optimum microwave frequency used to drive the polarization.

Enterprise Imaging Governance: HIMSS-SIIM Collaborative White Paper.

PubMed

Roth, Christopher J; Lannum, Louis M; Joseph, Carol L

2016-10-01

Enterprise imaging governance is an emerging need in health enterprises today. This white paper highlights the decision-making body, framework, and process for optimal enterprise imaging governance inclusive of five areas of focus: program governance, technology governance, information governance, clinical governance, and financial governance. It outlines relevant parallels and differences when forming or optimizing imaging governance as compared with other established broad horizontal governance groups, such as for the electronic health record. It is intended for CMIOs and health informatics leaders looking to grow and govern a program to optimally capture, store, index, distribute, view, exchange, and analyze the images of their enterprise.

Point-of-care technology supports bedside documentation.

PubMed

Carlson, Elizabeth; Catrambone, Cathy; Oder, Karl; Nauseda, Susan; Fogg, Lou; Garcia, Brian; Brown, Frederick M; Johnson, Mary E; Johnson, Tricia J; Llewellyn, Jane

2010-09-01

As the conversion to an electronic health record intensifies, the question of which data-entry device works best in what environment and situation is paramount. Specifically, what is the best mix of equipment to purchase and install on clinical units based on staff preferences and budget constraints? The authors discuss their evaluation of stationary personal computers, workshops on wheels, and handheld tablets related to timeliness of data entry and their use of focus groups to ascertain the pros/cons of data-entry devices and staff preferences. An assessment of the implications for costs related to the timeliness of data entry is also presented.

Atmospheric Electron-Induced X-Ray Spectrometer (AEXS) Development

NASA Technical Reports Server (NTRS)

Wilcox, Jaroslava Z.; Urgiles, Eduardo; Toda, Risaku; George, Thomas; Douglas, Susanne; Crisp, Joy

2005-01-01

This paper describes the progress in the development of the so-called Atmospheric Electron X-ray Spectrometer (AEXS) instrument in our laboratory at JPL. The AEXS is a novel miniature instrument concept based on the excitation of characteristic X-Ray Fluorescence (XRF) and luminescence spectra using a focused electron beam, for non-destructive evaluation of surfaces of samples in situ, in planetary ambient atmosphere. In situ operation is obtained through the use of a thin electron transmissive membrane to isolate the vacuum within the AEXS electron source from the outside ambient atmosphere. By using a focused electron beam, the impinging electrons on samples in the external atmosphere excite XRF spectra from the irradiated spots with high-to-medium spatial resolution. The XRF spectra are analyzed using an energy-dispersive detector to determine surface elemental composition. The use of high- intensity electron beam results in rapid spectrum acquisition (several minutes), and consequently low energy consumption (several tens of Joules) per acquired XRF spectrum in comparison to similar portable instruments.

Atomic Structure. Independent Learning Project for Advanced Chemistry (ILPAC). Unit S2.

ERIC Educational Resources Information Center

Inner London Education Authority (England).

This unit on atomic structure is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit consists of two levels. Level one focuses on the atomic nucleus. Level two focuses on the arrangement of extranuclear electrons, approaching atomic orbitals through both electron bombardment and spectra.…

Enhanced target normal sheath acceleration based on the laser relativistic self-focusing

NASA Astrophysics Data System (ADS)

Zou, D. B.; Zhuo, H. B.; Yang, X. H.; Shao, F. Q.; Ma, Y. Y.; Yu, T. P.; Wu, H. C.; Yin, Y.; Ge, Z. Y.; Li, X. H.

2014-06-01

The enhanced target normal sheath acceleration of ions in laser target interaction via the laser relativistic self-focusing effect is investigated by theoretical analysis and particle-in-cell simulations. The temperature of the hot electrons in the underdense plasma is greatly increased due to the occurrence of resonant absorption, while the electron-betatron-oscillation frequency is close to its witnessed laser frequency [Pukhov et al., Phys. Plasma 6, 2847 (1999)]. While these hot electrons penetrate through the backside solid target, a stronger sheath electric field at the rear surface of the target is induced, which can accelerate the protons to a higher energy. It is also shown that the optimum length of the underdense plasma is approximately equal to the self-focusing distance.

Series of structural and functional models for the ES (enzyme-substrate) complex of the Co(II)-containing quercetin 2,3-dioxygenase.

PubMed

Sun, Ying-Ji; Huang, Qian-Qian; Zhang, Jian-Jun

2014-03-17

A series of mononuclear Co(II)-flavonolate complexes [Co(II)L(R)(fla)] (L(R)H = 2-{[bis(pyridin-2-ylmethyl)amino]methyl}-p/m-R-benzoic acid; R = p-OMe (1), p-Me (2), m-Br (4), and m-NO2 (5); fla = flavonolate) were designed and synthesized as structural and functional models for the ES (enzyme-substrate) complexes to mimic the active site of the Co(II)-containing quercetin 2,3-dioxygenase (Co-2,3-QD). The metal center Co(II) ion in each complex shows a similar distorted octahedral geometry. The model complexes display high enzyme-type dioxygenation reactivity (oxidative O-heterocyclic ring opening of the coordinated substrate flavonolate) at low temperature, presumably due to the attached carboxylate group in the ligands. The reactivity exhibits a substituent group dependent order of -OMe (1) > -Me (2) > -H (3)14b > -Br (4) > -NO2 (5), and the Hammett plot is linear (ρ = -0.78). This can be explained as the electronic nature of the substituent group in the ligands may influence the conformation and redox potential of the bound flavonolate and finally bring different reactivity. The structures, properties, and reactivity of the model complexes show some dependence on the substituent group in the supporting model ligands, and there is some relationship among them. This study is the first example of a series of structural and functional ES models of Co-2,3-QD, with focus on the effects of the electronic nature of substituted groups and the carboxylate group of the ligands to the dioxygenation reactivity, that will provide important insights into the structure-property-reactivity relationship and the catalytic role of Co-2,3-QD.

Improvement of Interaction in a Composite Structure by Using a Sol-Gel Functional Coating on Carbon Fibers.

PubMed

Szczurek, Anna; Barcikowski, Michał; Leluk, Karol; Babiarczuk, Bartosz; Kaleta, Jerzy; Krzak, Justyna

2017-08-25

The modification of carbon fibers for improving adhesion between fibers and an epoxy resin in composite materials has become the focus of attention. In this work the carbon fiber coating process has been devised in a way preventing the stiffening and clumping of fibers. To improve interactions between coated fibers and a resin in composites, four types of silica coatings with different organic functional groups (3-aminopropyl-coating 1, 3-mercaptopropyl-coating 2, 2-(3,4-epoxycyclohexyl) ethyl-coating 3, methyl-coating 4) were obtained. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to distinguish the changes of a carbon fibers surface after coating deposition. The thickness of the obtained coatings, including the diversity of thickness, was determined by transmission electron microscopy (TEM). The increase in surface free energy (SFE) of modified fibers, including the distinction between the polar and dispersive parts, was examined by wettability measurements using a tensometric test. The developed coating preparation process allowed to cover fibers separately with nanoscale silica layers, which changed their morphology. The introduction of organic functional groups resulted in surface free energy changes, especially an increase in specific polar surface energy components.

Improvement of Interaction in a Composite Structure by Using a Sol-Gel Functional Coating on Carbon Fibers

PubMed Central

Barcikowski, Michał; Leluk, Karol; Babiarczuk, Bartosz; Kaleta, Jerzy

2017-01-01

The modification of carbon fibers for improving adhesion between fibers and an epoxy resin in composite materials has become the focus of attention. In this work the carbon fiber coating process has been devised in a way preventing the stiffening and clumping of fibers. To improve interactions between coated fibers and a resin in composites, four types of silica coatings with different organic functional groups (3-aminopropyl–coating 1, 3-mercaptopropyl–coating 2, 2-(3,4-epoxycyclohexyl) ethyl–coating 3, methyl–coating 4) were obtained. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to distinguish the changes of a carbon fibers surface after coating deposition. The thickness of the obtained coatings, including the diversity of thickness, was determined by transmission electron microscopy (TEM). The increase in surface free energy (SFE) of modified fibers, including the distinction between the polar and dispersive parts, was examined by wettability measurements using a tensometric test. The developed coating preparation process allowed to cover fibers separately with nanoscale silica layers, which changed their morphology. The introduction of organic functional groups resulted in surface free energy changes, especially an increase in specific polar surface energy components. PMID:28841187

Nitroxides as Antioxidants and Anticancer Drugs

PubMed Central

Lewandowski, Marcin; Gwozdzinski, Krzysztof

2017-01-01

Nitroxides are stable free radicals that contain a nitroxyl group with an unpaired electron. In this paper, we present the properties and application of nitroxides as antioxidants and anticancer drugs. The mostly used nitroxides in biology and medicine are a group of heterocyclic nitroxide derivatives of piperidine, pyrroline and pyrrolidine. The antioxidant action of nitroxides is associated with their redox cycle. Nitroxides, unlike other antioxidants, are characterized by a catalytic mechanism of action associated with a single electron oxidation and reduction reaction. In biological conditions, they mimic superoxide dismutase (SOD), modulate hemoprotein’s catalase-like activity, scavenge reactive free radicals, inhibit the Fenton and Haber-Weiss reactions and suppress the oxidation of biological materials (peptides, proteins, lipids, etc.). The use of nitroxides as antioxidants against oxidative stress induced by anticancer drugs has also been investigated. The application of nitroxides and their derivatives as anticancer drugs is discussed in the contexts of breast, hepatic, lung, ovarian, lymphatic and thyroid cancers under in vivo and in vitro experiments. In this article, we focus on new natural spin-labelled derivatives such as camptothecin, rotenone, combretastatin, podophyllotoxin and others. The applications of nitroxides in the aging process, cardiovascular disease and pathological conditions were also discussed. PMID:29165366

Stakeholder analysis for adopting a personal health record standard in Korea.

PubMed

Kang, Min-Jeoung; Jung, Chai Young; Kim, Soyoun; Boo, Yookyung; Lee, Yuri; Kim, Sundo

Interest in health information exchanges (HIEs) is increasing. Several countries have adopted core health data standards with appropriate strategies. This study was conducted to determine the feasibility of a continuity of care record (CCR) as the standard for an electronic version of the official transfer note and the HIE in Korean healthcare. A technical review of the CCR standard and analysis of stakeholders' views were undertaken. Transfer notes were reviewed and matched with CCR standard categories. The standard for the Korean coding system was selected. Stakeholder analysis included an online survey of members of the Korean Society of Medical Informatics, a public hearing to derive opinions of consumers, doctors, vendors, academic societies and policy makers about the policy process, and a focus group meeting with EMR vendors to determine which HIE objects were technically applicable. Data objects in the official transfer note form matched CCR standards. Korean Classification of Diseases, Korean Standard Terminology of Medicine, Electronic Data Interchange code (EDI code), Logical Observation Identifiers Names and Codes, and Korean drug codes (KD code) were recommended as the Korean coding standard.'Social history', 'payers', and 'encounters' were mostly marked as optional or unnecessary sections, and 'allergies', 'alerts', 'medication list', 'problems/diagnoses', 'results',and 'procedures' as mandatory. Unlike the US, 'social history' was considered optional and 'advance directives' mandatory.At the public hearing there was some objection from the Korean Medical Association to the HIE on legal grounds in termsof intellectual property and patients' personal information. Other groups showed positive or neutral responses. Focus group members divided CCR data objects into three phases based onpredicted adoption time in CCR: (i) immediate adoption; (ii) short-term adoption ('alerts', 'family history'); and (iii) long-term adoption ('results', 'advanced directives', 'functional status', 'medical equipment', 'vital signs', 'plan of care', 'social history'). There were no technical problems in generating the CCR standard document from EMRs. Matters of concern that arose from study results should be resolved with time and consultation.

A focus group study of predictors of relapse in electronic gaming machine problem gambling, part 2: factors that 'pull' the gambler away from relapse.

PubMed

Oakes, J; Pols, R; Battersby, M; Lawn, S; Pulvirenti, M; Smith, D

2012-09-01

This study aimed to develop an empirically based description of relapse in Electronic Gaming Machine (EGM) problem gambling (PG) by describing the processes and factors that 'pull' the problem gambler away from relapse contrasted with the 'push' towards relapse. These conceptualisations describe two opposing, interacting emotional processes occurring within the problem gambler during any relapse episode. Each relapse episode comprises a complex set of psychological and social behaviours where many factors interact sequentially and simultaneously within the problem gambler to produce a series of mental and behaviour events that end (1) with relapse where 'push' overcomes 'pull' or (2) continued abstinence where 'pull' overcomes 'push'. Four focus groups comprising thirty participants who were EGM problem gamblers, gamblers' significant others, therapists and counsellors described their experiences and understanding of relapse. The groups were recorded, recordings were then transcribed and analysed using thematic textual analysis. It was established that vigilance, motivation to commit to change, positive social support, cognitive strategies such as remembering past gambling harms or distraction techniques to avoid thinking about gambling to enable gamblers to manage the urge to gamble and urge extinction were key factors that protected against relapse. Three complementary theories emerged from the analysis. Firstly, a process of reappraisal of personal gambling behaviour pulls the gambler away from relapse. This results in a commitment to change that develops over time and affects but is independent of each episode of relapse. Secondly, relapse may be halted by interacting factors that 'pull' the problem gambler away from the sequence of mental and behavioural events, which follow the triggering of the urge and cognitions to gamble. Thirdly, urge extinction and apparent 'cure' is possible for EGM gambling. This study provides a qualitative, empirical model for understanding protective factors against gambling relapse.

Barriers for recess physical activity: a gender specific qualitative focus group exploration.

PubMed

Pawlowski, Charlotte Skau; Tjørnhøj-Thomsen, Tine; Schipperijn, Jasper; Troelsen, Jens

2014-06-23

Many children, in particular girls, do not reach the recommended amount of daily physical activity. School recess provides an opportunity for both boys and girls to be physically active, but barriers to recess physical activity are not well understood. This study explores gender differences in children's perceptions of barriers to recess physical activity. Based on the socio-ecological model four types of environmental barriers were distinguished: natural, social, physical and organizational environment. Data were collected through 17 focus groups (at 17 different schools) with in total 111 children (53 boys) from fourth grade, with a mean age of 10.4 years. The focus groups included an open group discussion, go-along group interviews, and a gender segregated post-it note activity. A content analysis of the post-it notes was used to rank the children's perceived barriers. This was verified by a thematic analysis of transcripts from the open discussions and go-along interviews. The most frequently identified barriers for both boys and girls were weather, conflicts, lack of space, lack of play facilities and a newly-found barrier, use of electronic devices. While boys and girls identified the same barriers, there were both inter- and intra-gender differences in the perception of these barriers. Weather was a barrier for all children, apart from the most active boys. Conflicts were perceived as a barrier particularly by those boys who played ballgames. Girls said they would like to have more secluded areas added to the school playground, even in large schoolyards where lack of space was not a barrier. This aligned with girls' requests for more "hanging-out" facilities, whereas boys primarily wanted activity promoting facilities. Based on the results from this study, we recommend promoting recess physical activity through a combination of actions, addressing barriers within the natural, social, physical and organizational environment.

Long-term, correlated emittance decrease in intense, high-brightness induction linacs

NASA Astrophysics Data System (ADS)

Carlsten, Bruce E.

1999-09-01

Simulations of high-brightness induction linacs often show a slow, long-term emittance decrease as the beam is matched from the electron gun into the linac. Superimposed on this long-term decrease are rapid emittance oscillations. These effects can be described in terms of correlations in the beam's radial phase space. The rapid emittance oscillations are due to transverse plasma oscillations, which stay nearly in phase for different radial positions within the beam. The initial emittance, just after the electron gun, is dominated by nonlinear focusing within the gun introduced by the anode exit hole. Due to the large space-charge force of an intense electron beam, the focusing of the beam through the matching section introduces an effective nonlinear force (from the change in the particles' potential energies) which counteracts the nonlinearities from the electron gun, leading to an average, long-term emittance decrease. Not all of the initial nonlinearity is removed by the matching procedure, and there are important consequences both for emittance measurements using solenoid focal length scans and for focusing the electron beam to a target.

Women’s Knowledge, Views, and Experiences Regarding Alcohol Use and Pregnancy: Opportunities to Improve Health Messages

PubMed Central

Elek, Elvira; Harris, Shelly L.; Squire, Claudia M.; Margolis, Marjorie; Weber, Mary Kate; Dang, Elizabeth Parra; Mitchell, Betsy

2017-01-01

Background Women continue to drink alcohol during pregnancy despite Surgeon Generals’ Advisory statements and educational efforts about the dangers. Purpose This focus group research study examined women’s knowledge and beliefs about alcohol consumption and its risks during pregnancy along with related perceptions of social influences and information sources in order to inform future messaging. Methods The study included 20 focus groups of 149 reproductive-age women segmented by age, pregnancy status, and race/ethnicity. Results and Discussion Women acknowledged the risks and consequences of drinking alcohol during pregnancy, but many held common misconceptions. Some women continued to drink during pregnancy or expressed intent to continue drinking until pregnancy confirmation. Findings indicated that women’s partners, families, and friends influence women’s decisions to drink or abstain from alcohol. In addition, health care providers and the Internet act as important sources of health information for women but sometimes do not adequately educate them about the risks of alcohol use and pregnancy. Translation to Health Education Practice Considerations for messaging and educational materials related to alcohol use and pregnancy include providing clear and consistent messaging (especially from health professionals), focusing on social support strategies, and utilizing electronic media. The findings and conclusions in this report are those of the authors and do not necessarily represent the official position of the Centers for Disease Control and Prevention. PMID:28261370

Personal Electronic Health Records: Understanding User Requirements and Needs in Chronic Cancer Care

PubMed Central

Winkler, Eva; Kamradt, Martina; Längst, Gerda; Eckrich, Felicitas; Heinze, Oliver; Bergh, Bjoern; Szecsenyi, Joachim; Ose, Dominik

2015-01-01

Background The integration of new information and communication technologies (ICTs) is becoming increasingly important in reorganizing health care. Adapting ICTs as supportive tools to users' needs and daily practices is vital for adoption and use. Objective In order to develop a Web-based personal electronic health record (PEPA), we explored user requirements and needs with regard to desired information and functions. Methods A qualitative study across health care sectors and health professions was conducted in a regional health care setting in Germany. Overall, 10 semistructured focus groups were performed, collecting views of 3 prospective user groups: patients with colorectal cancer (n=12) and representatives from patient support groups (n=2), physicians (n=17), and non-medical HCPs (n=16). Data were audio- and videotaped, transcribed verbatim, and thematically analyzed using qualitative content analysis. Results For both patients and HCPs, it was central to have a tool representing the chronology of illness and its care processes, for example, patients wanted to track their long-term laboratory findings (eg, tumor markers). Designing health information in a patient accessible way was highlighted as important. Users wanted to have general and tumor-specific health information available in a PEPA. Functions such as filtering information and adding information by patients (eg, on their well-being or electronic communication with HCPs via email) were discussed. Conclusions In order to develop a patient/user centered tool that is tailored to user needs, it is essential to address their perspectives. A challenge for implementation will be how to design PEPA’s health data in a patient accessible way. Adequate patient support and technical advice for users have to be addressed. PMID:25998006

Where does the electron go? The nature of ortho/para and meta group directing in electrophilic aromatic substitution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Shubin, E-mail: shubin@email.unc.edu

Electrophilic aromatic substitution as one of the most fundamental chemical processes is affected by atoms or groups already attached to the aromatic ring. The groups that promote substitution at the ortho/para or meta positions are, respectively, called ortho/para and meta directing groups, which are often characterized by their capability to donate electrons to or withdraw electrons from the ring. Though resonance and inductive effects have been employed in textbooks to explain this phenomenon, no satisfactory quantitative interpretation is available in the literature. Here, based on the theoretical framework we recently established in density functional reactivity theory (DFRT), where electrophilicity andmore » nucleophilicity are simultaneously quantified by the Hirshfeld charge, the nature of ortho/para and meta group directing is systematically investigated for a total of 85 systems. We find that regioselectivity of electrophilic attacks is determined by the Hirshfeld charge distribution on the aromatic ring. Ortho/para directing groups have most negative charges on the ortho/para positions, while meta directing groups often possess the largest negative charge on the meta position. Our results do not support that ortho/para directing groups are electron donors and meta directing groups are electron acceptors. Most neutral species we studied here are electron withdrawal in nature. Anionic systems are always electron donors. There are also electron donors serving as meta directing groups. We predicted ortho/para and meta group directing behaviors for a list of groups whose regioselectivity is previously unknown. In addition, strong linear correlations between the Hirshfeld charge and the highest occupied molecular orbital have been observed, providing the first link between the frontier molecular orbital theory and DFRT.« less

An electron linac-based system for BNCT of shallow tumors

NASA Astrophysics Data System (ADS)

Farhad Masoudi, S.; Ghiasi, Hedieh; Harif, Maryam; Rasouli, Fatemeh S.

2018-07-01

Although BNCT has been in existence since the 1950s, it continues to be of special significant and interest for wide groups of researchers. Recent studies, focused on investigating appropriate neutron sources as alternatives for nuclear reactors, revealed the high potential of electron linac-based facilities to improve the efficiency of this treatment method. The present simulation study has been devoted to both designing an optimized and geometrically simple target to be used as a photoneutron source based on an electron linac and designing a configuration composed of arrangement of materials to generate an appropriate beam for BNCT of shallow tumors considering the widely accepted criteria for pre-clinical survey. It has been found that the behavior of photoneutrons' current and their average energy on the surface of the target is independent of the incident energy. Accordingly, we managed to present a formula to predict the average energy of photoneutrons knowing the electron energy to an acceptable approximation avoiding Monte Carlo simulations. Considering the conflict between the beam intensity and its purity in the whole beam designing process, an optimized beam shaping assembly for electron linac of 18 MeV/ mA has been proposed. These results in essence confirm the ability of these sources for BNCT of shallow tumors and are therefore encouraging for further studies. Furthermore, the results show that this configuration, which the corresponding beam fulfills all the medical requirements, is also usable for electron linacs of other energies. This can be of high importance in practical point of view.

Looks like smoking, is it smoking?: children's perceptions of cigarette-like nicotine delivery systems, smoking and cessation.

PubMed

Faletau, Julienne; Glover, Marewa; Nosa, Vili; Pienaar, Fiona

2013-11-18

Alternative cigarette-like nicotine delivery systems have been met with diverse opinions. One concern has been for the effect on children. We investigate whether children can differentiate tobacco cigarette smoking from use of a nicotine inhaler and electronic cigarette. Their opinions on these devices was also of interest. Two structured focus groups and twelve individual interviews were conducted with twenty Māori and Pacific children (6-10 years old) in low socioeconomic areas in Auckland, New Zealand. Children viewed short video clips on an iPad that demonstrated an actor smoking a tobacco cigarette, sucking a lollipop or using an electronic cigarette or a nicotine inhaler. Children did not recognise the inhaler or electronic cigarette. Some children did however notice anomalies in the 'smoking' behaviour. Once told about the products the children were mostly positive about the potential of the inhaler and electronic cigarette to assist smokers to quit. Negative perceptions were expressed, including views about the ill health effects associated with continued nicotine intake and the smoker's inability to quit. In a context unfamiliar with electronic cigarettes or nicotine inhalers, such as New Zealand, children may misperceive use of these products as smoking. Once these products are more common and the purpose of them is known, seeing people use them should normalise quitting behaviour, something the children were very supportive of.

Development of the electronic health records for nursing education (EHRNE) software program.

PubMed

Kowitlawakul, Yanika; Wang, Ling; Chan, Sally Wai-Chi

2013-12-01

This paper outlines preliminary research of an innovative software program that enables the use of an electronic health record in a nursing education curriculum. The software application program is called EHRNE, which stands for Electronic Heath Record for Nursing Education. The aim of EHRNE is to enhance student's learning of health informatics when they are working in the simulation laboratory. Integrating EHRNE into the nursing curriculum exposes students to electronic health records before they go into the workplace. A qualitative study was conducted using focus group interviews of nine nursing students. Nursing students' perceptions of using the EHRNE application were explored. The interviews were audio-taped and transcribed verbatim. The data was analyzed following the Colaizzi (1978) guideline. Four main categories that related to the EHRNE application were identified from the interviews: functionality, data management, timing and complexity, and accessibility. The analysis of the data revealed advantages and limitations of using EHRNE in the classroom setting. Integrating the EHRNE program into the curriculum will promote students' awareness of electronic documentation and enhance students' learning in the simulation laboratory. Preliminary findings suggested that before integrating the EHRNE program into the nursing curriculum, educational sessions for both students and faculty outlining the software's purpose, advantages, and limitations were needed. Following the educational sessions, further investigation of students' perceptions and learning using the EHRNE program is recommended. Copyright © 2012 Elsevier Ltd. All rights reserved.

Nonlinear damping of oblique whistler mode waves through Landau resonance

NASA Astrophysics Data System (ADS)

Hsieh, Y.; Omura, Y.

2017-12-01

Nonlinear trapping of electrons through Landau resonance is a characteristic dynamics in oblique whistler-mode wave particle interactions. The resonance velocity of the Landau resonance at quasi-parallel propagation becomes very close to the parallel group velocity of whistler-mode wave at frequency around 0.5 Ωe, causing a long distance of resonant interaction and strong acceleration of resonant electrons [1]. We demonstrate these effective accelerations for electrons with high equatorial pitch angle ( > 60°) by test particle simulations with parameters for the Earth's inner magnetosphere at L=5. In the simulations, we focus on slightly oblique whistler mode waves with wave normal angle < 20°. Analyzing the wave electric field E and the resonant current J, which is composed of electrons undergoing the Landau resonance, we find that the J·E is mainly positive, which denotes the damping of the wave. Furthermore, we confirm that this positive J•E is dominated by transverse component Jperp·Eperp rather than by longitudinal component Jpara·Eperp. The simulation results reveal that the Landau resonance contributes to the nonlinear damping at 0.5 Ωe for whistler mode waves. Reference [1] Hsieh, Y.-K., and Y. Omura (2017), Nonlinear dynamics of electrons interacting with oblique whistler mode chorus in the magnetosphere, J. Geophys. Res. Space Physics, 122, doi:10.1002/2016JA023255.

The Ins and the Outs of Electronic Publishing.

ERIC Educational Resources Information Center

Wills, Mathew; Wills, Gordon

1996-01-01

Examines electronic publishing for academic and professional publishers. Discusses benefits of electronic publishing to authors and readers, argues that the hard sell and product-driven mindsets will not work in a customer-focused communications medium, and outlines characteristics of electronic publishing that must be incorporated in successful…

Experimental characterization of active plasma lensing for electron beams

NASA Astrophysics Data System (ADS)

Pompili, R.; Anania, M. P.; Bellaveglia, M.; Biagioni, A.; Bini, S.; Bisesto, F.; Brentegani, E.; Castorina, G.; Chiadroni, E.; Cianchi, A.; Croia, M.; Di Giovenale, D.; Ferrario, M.; Filippi, F.; Giribono, A.; Lollo, V.; Marocchino, A.; Marongiu, M.; Mostacci, A.; Di Pirro, G.; Romeo, S.; Rossi, A. R.; Scifo, J.; Shpakov, V.; Vaccarezza, C.; Villa, F.; Zigler, A.

2017-03-01

The active plasma lens represents a compact and affordable tool with radially symmetric focusing and field gradients up to several kT/m. In order to be used as a focusing device, its effects on the particle beam distribution must be well characterized. Here, we present the experimental results obtained by focusing an high-brightness electron beam by means of a 3 cm-long discharge-capillary pre-filled with Hydrogen gas. We achieved minimum spot sizes of 24 μ m (rms) showing that, during plasma lensing, the beam emittance increases due to nonlinearities in the focusing field. The results have been cross-checked with numerical simulations, showing an excellent agreement.

Optical characterization of the InFocus TVT-6000 liquid crystal television (LCTV) using custom drive electronics

NASA Astrophysics Data System (ADS)

Duffey, Jason N.; Jones, Brian K.; Loudin, Jeffrey A.; Booth, Joseph J.

1995-03-01

Liquid crystal televisions are popular low-cost spatial light modulators. One LCTV of interest is found in the InFocus TVT-6000 television projector. A wavefront splitting interferometer has been constructed and analyzed for measuring the complex characteristics of these modulators, including phase and amplitude coupling. The results of this evaluation using the TVT-6000 projector drive electronics have been presented in a previous work. This work will present results of the complex characterizations of these modulators using custom drive electronics.

Active Plasma Lensing for Relativistic Laser-Plasma-Accelerated Electron Beams

DOE PAGES

van Tilborg, J.; Steinke, S.; Geddes, C. G. R.; ...

2015-10-28

The compact, tunable, radially symmetric focusing of electrons is critical to laser-plasma accelerator (LPA) applications. Experiments are presented demonstrating the use of a discharge-capillary active plasma lens to focus 100-MeV-level LPA beams. The lens can provide tunable field gradients in excess of 3000 T/m, enabling cm-scale focal lengths for GeV-level beam energies and allowing LPA-based electron beams and light sources to maintain their compact footprint. For a range of lens strengths, excellent agreement with simulation was obtained.

Correlative light-electron fractography for fatigue striations characterization in metallic alloys.

PubMed

Hein, Luis Rogerio de Oliveira; de Oliveira, José Alberto; de Campos, Kamila Amato

2013-09-01

The correlative light-electron fractography technique combines correlative microscopy concepts to the extended depth-from-focus reconstruction method, associating the reliable topographic information of 3-D maps from light microscopy ordered Z-stacks to the finest lateral resolution and large focus depth from scanning electron microscopy. Fatigue striations spacing analysis can be precisely measured, by correcting the mean surface tilting with the knowledge of local elevation data from elevation maps. This new technique aims to improve the accuracy of quantitative fractography in fatigue fracture investigations. Copyright © 2013 Wiley Periodicals, Inc.

Solitons in a nonlinear model of spin transport in helical molecules

NASA Astrophysics Data System (ADS)

Albares, P.; Díaz, E.; Cerveró, Jose M.; Domínguez-Adame, F.; Diez, E.; Estévez, P. G.

2018-02-01

We study an effective integrable nonlinear model describing an electron moving along the axis of a deformable helical molecule. The helical conformation of dipoles in the molecular backbone induces an unconventional Rashba-like interaction that couples the electron spin with its linear momentum. In addition, a focusing nonlinearity arises from the electron-lattice interaction, enabling the formation of a variety of stable solitons such as bright solitons, breathers, and rogue waves. A thorough study of the soliton solutions for both focusing and defocusing nonlinear interaction is presented and discussed.

Electron density profile measurements at a self-focusing ion beam with high current density and low energy extracted through concave electrodes.

PubMed

Fujiwara, Y; Hirano, Y; Kiyama, S; Nakamiya, A; Koguchi, H; Sakakita, H

2014-02-01

The self-focusing phenomenon has been observed in a high current density and low energy ion beam. In order to study the mechanism of this phenomenon, a special designed double probe to measure the electron density and temperature is installed into the chamber where the high current density ion beam is injected. Electron density profile is successfully measured without the influence of the ion beam components. Estimated electron temperature and density are ∼0.9 eV and ∼8 × 10(8) cm(-3) at the center of ion beam cross section, respectively. It was found that a large amount of electrons are spontaneously accumulated in the ion beam line in the case of self-forcing state.

Fabrication method of two-photon luminescent organic nano-architectures using electron-beam irradiation

NASA Astrophysics Data System (ADS)

Kamura, Yoshio; Imura, Kohei

2018-06-01

Optical recording on organic thin films with a high spatial resolution is promising for high-density optical memories, optical computing, and security systems. The spatial resolution of the optical recording is limited by the diffraction of light. Electrons can be focused to a nanometer-sized spot, providing the potential for achieving better resolution. In conventional electron-beam lithography, however, optical tuning of the fabricated structures is limited mostly to metals and semiconductors rather than organic materials. In this article, we report a fabrication method of luminescent organic architectures using a focused electron beam. We optimized the fabrication conditions of the electron beam to generate chemical species showing visible photoluminescence via two-photon near-infrared excitations. We utilized this fabrication method to draw nanoscale optical architectures on a polystyrene thin film.

Electron dynamics in a plasma focus. [electron acceleration

NASA Technical Reports Server (NTRS)

Hohl, F.; Gary, S. P.; Winters, P. A.

1977-01-01

Results are presented of a numerical integration of the three-dimensional relativistic equations of motion of electrons subject to given electric and magnetic fields deduced from experiments. Fields due to two different models are investigated. For the first model, the fields are those due to a circular distribution of axial current filaments. As the current filaments collapse toward the axis, large azimuthal magnetic and axial electric fields are induced. These fields effectively heat the electrons to a temperature of approximately 8 keV and accelerate electrons within the radius of the filaments to high axial velocities. Similar results are obtained for the current-reduction phase of focus formation. For the second model, the fields are those due to a uniform current distribution. Both the current-reduction and the compression phases were studied. These is little heating or acceleration of electrons during the compression phase because the electrons are tied to the magnetic field. However, during the current-reduction phase, electrons near the axis are accelerated toward the center electrode and reach energies of 100 keV. A criterion is obtained which limits the runaway electron current to about 400 A.

Electron Spectroscopic Methods in Teaching.

ERIC Educational Resources Information Center

Allan, Michael

1987-01-01

Discusses electron-loss spectroscopy and the experimentally observed excitation energies in terms of qualitative MO theory. Reviews information on photoelectron spectroscopy and electron transmission spectroscopy and their relation to the occupied and unoccupied orbital levels. Focuses on teaching applications. (ML)

Effect of initial phase on error in electron energy obtained using paraxial approximation for a focused laser pulse in vacuum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Kunwar Pal, E-mail: k-psingh@yahoo.com; Department of Physics, Shri Venkateshwara University, Gajraula, Amroha, Uttar Pradesh 244236; Arya, Rashmi

2015-09-14

We have investigated the effect of initial phase on error in electron energy obtained using paraxial approximation to study electron acceleration by a focused laser pulse in vacuum using a three dimensional test-particle simulation code. The error is obtained by comparing the energy of the electron for paraxial approximation and seventh-order correction description of the fields of Gaussian laser. The paraxial approximation predicts wrong laser divergence and wrong electron escape time from the pulse which leads to prediction of higher energy. The error shows strong phase dependence for the electrons lying along the axis of the laser for linearly polarizedmore » laser pulse. The relative error may be significant for some specific values of initial phase even at moderate values of laser spot sizes. The error does not show initial phase dependence for a circularly laser pulse.« less

Low-dose patterning of platinum nanoclusters on carbon nanotubes by focused-electron-beam-induced deposition as studied by TEM

PubMed Central

Bittencourt, Carla; Bals, Sara; Van Tendeloo, Gustaaf

2013-01-01

Summary Focused-electron-beam-induced deposition (FEBID) is used as a direct-write approach to decorate ultrasmall Pt nanoclusters on carbon nanotubes at selected sites in a straightforward maskless manner. The as-deposited nanostructures are studied by transmission electron microscopy (TEM) in 2D and 3D, demonstrating that the Pt nanoclusters are well-dispersed, covering the selected areas of the CNT surface completely. The ability of FEBID to graft nanoclusters on multiple sides, through an electron-transparent target within one step, is unique as a physical deposition method. Using high-resolution TEM we have shown that the CNT structure can be well preserved thanks to the low dose used in FEBID. By tuning the electron-beam parameters, the density and distribution of the nanoclusters can be controlled. The purity of as-deposited nanoclusters can be improved by low-energy electron irradiation at room temperature. PMID:23399584

Development of a radiographic method for measuring the discrete spectrum of the electron beam from a plasma focus device

NASA Astrophysics Data System (ADS)

Shamsian, Neda; Bidabadi, Babak Shirani; Pirjamadi, Hosein

2017-07-01

An indirect method is proposed for measuring the relative energy spectrum of the pulsed electron beam of a plasma focus device. The Bremsstrahlung x-ray, generated by the collision of electrons against the anode surface, was measured behind lead filters with various thicknesses using a radiographic film system. A matrix equation was considered in order to explain the relation between the x-ray dose and the spectral amplitudes of the electron beam. The electron spectrum of the device was measured at 0.6 mbar argon and 22 kV charging voltage, in four discrete energy intervals extending up to 500 keV. The results of the experiments show that most of the electrons are emitted in the 125-375 keV energy range and the spectral amplitude becomes negligible beyond 375 keV.

SOME PROBLEMS IN THE CONSTRUCTION OF AN ELECTRON LINEAR ACCELERATOR (in Dutch)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verhaeghe, J.; Vanhuyse, V.; Van Leuven, P.

1959-01-01

Special problems encountered in the construction of the electron linear accelerator of the Natuurkundig Laboratorium der Rijksuniversiteit of Ghent are discussed. The subjects considered are magnetic focusing, magnetic screening of the electron gun cathode, abnormal attenuation-multipactor effects, and electron energy control. (J.S.R.)

Infrared Semiconductor Metamaterials

DTIC Science & Technology

2016-09-01

Approved for public release. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The central objective of this program is to create a new class of programmable ...this program is to create a new class of programmable infrared optic that can steer or focus beams and is reconfigurable at electronic time...element of a programmable infrared optic that can steer or focus beams and is reconfigurable at electronic time-scales. B. Major

3D splint prototype system for applications in muscular rehab by transcutaneous electrical nerve stimulation (TENS)

NASA Astrophysics Data System (ADS)

Saldaña-Martínez, M. I.; Guzmán-González, J. V.; Barajas-González, O. G.; Guzman-Ramos, V.; García-Garza, A. K.; González-García, R. B.; García-Ramírez, M. A.

2017-03-01

It is quite common that patients with ligamentous ruptures, tendonitis, tenosynovitis or sprains are foreseen the use of ad hoc splints for a swift recovery. In this paper, we propose a rehabilitation split that is focused on upper-limb injuries. By considering that upper-limb patient shows a set of different characteristics, our proposal personalizes and prints the splint custom made though a digital model that is generated by a 3D commercial scanner. To fabricate the 3D scanned model the Stereolithography material (SLA) is considered due to the properties that this material offers. In order to complement the recovery process, an electronic system is implemented within the splint design. This system generates a set of pulses for a fix period of time that focuses mainly on a certain group of muscles to allow a fast recovery process known as Transcutaneous Electrical Nerve Stimulation Principle (TENS).

Beam trapping in high-current cyclic accelerators with strong-focusing fields. Memorandum report, January-December 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sprangle, P.; Kapetanakos, C.A.

1985-03-06

In cyclic induction accelerators, the energy of the particles increases slowly in synchronism with the vertical (betatron) magnetic field. As a consequence of the slow acceleration, the charged particles must be confined by the weak-focusing magnetic field over long periods of time, and thus field errors, instabilities, and radiation losses can impose limitations on the acceleration process. These limitations can be substantially relaxed if the acceleration were to occur rapidly, say over a few microseconds. An appropriate name for such an accelerator is REBA-TRON (Rapid Electron Beam Accelerator). This paper considers a possible mechanism which could trap a high currentmore » electron beam in the strong focusing magnetic fields of the rebatron. We investigate a possible mechanism for trapping an intense relativistic electron beam confined by strong focusing fields. In our model the electron beam is assumed to be injected into torsatron fields off axis, near the chamber walls. The finite resistivity of the walls results in a drag force on the beam centroid which may cause the beam to spiral inward towards the axis of the chamber. We have analyzed this mechanism and obtained decay rates for the inward spiraling beam motion.« less

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mangum, John S.; Chan, Lisa H.; Schmidt, Ute

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In thismore » work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice.« less

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs.

PubMed

Mangum, John S; Chan, Lisa H; Schmidt, Ute; Garten, Lauren M; Ginley, David S; Gorman, Brian P

2018-05-01

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In this work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice. Copyright © 2018 Elsevier B.V. All rights reserved.

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs

DOE PAGES

Mangum, John S.; Chan, Lisa H.; Schmidt, Ute; ...

2018-02-23

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In thismore » work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice.« less

Influence of molecular distortion on the exciton quenching for quaterthiophene-terminated self-assembled monolayers on Au(111)

NASA Astrophysics Data System (ADS)

Kato, Hiroyuki S.; Murakami, Yoshinari; Saitoh, Riyo; Osumi, Yuji; Okaue, Daijiro; Kiriyama, Yoshiaki; Ueba, Takahiro; Yamada, Takashi; Ie, Yutaka; Aso, Yoshio; Munakata, Toshiaki

2018-03-01

We have studied the dynamics of photoexcited electronic states for structure-specific alkanethiolate-based self-assembled monolayers (SAMs) on Au(111). At the even numbers of methylene units (n) in the alkylene chain, a molecular distortion due to strong interference between the end substituents is expected. Focused on this geometrical perturbation, here, we examine the influence of the molecular distortion on the quenching process of photoexcited quaterthiophene (4T)-terminated alkanethiolate SAMs (4TCnS-SAMs) for even n (= 6 and 8). The occupied and unoccupied electronic levels of 4TCnS-SAMs are specified by ultraviolet photoelectron spectroscopy (UPS) and two-photon photoemission (2PPE) spectroscopy, respectively. The quenching rate, i.e., lifetime (τn), of the photoexcited state for 4TCnS-SAMs is evaluated by the time-resolved 2PPE measurements. In comparison to the previously reported results for odd n [J. Phys. Chem. C 119 (2015) 7400-7407], we find that τn for even n is not in the middle of those for n ± 1 but close to that for n - 1, i.e., τ6 ≈ τ5 and τ8 ≈ τ7, in contrast to the negligible difference in the electronic levels for all n. By the examination of molecular configurations using scanning tunneling microscopy (STM) and infrared reflection absorption spectroscopy (IRAS), we elucidate the weak n dependence of the 4T group orientation and the n-parity-dependent conformation change of alkylene chain. We conclude that the n parity dependence of τn results from a structural distortion of the aliphatic alkylene chain, in which a skewed alkylene chain appears for even n, rather than the electronic modification of the aromatic 4T groups.

A study of the interaction of thioindigo dye, with several inorganic host materials

NASA Astrophysics Data System (ADS)

Ramirez, Alejandra

Maya Blue has been the focus of numerous studies and is believed to be a mixture of palygorskite clay and indigo dye.1,2 Several derivatives of this pigment have been developed with intriguing properties. For instance, the dye thioindigo reacts with the palygorskite clay to exhibit a broad range of colors from red to blue under UV-Vis excitation. Based on FT-Raman and computer simulation, previous work performed in our group could relate indigo and thioindigo interaction to the aluminum sites in the framework. 3,4 The work performed with other inorganic host materials such as, layer structures and zeolites have displayed reversible acid indicator properties, similar to the ones observed in concentrated sulfuric acid. Spectroscopic analyses and computer modeling of the above mentioned interactions have been evaluated. Results obtained by these techniques showed that in dehydrated materials a disturbance of thioindigo C=O at 1655 cm-1 to lower frequencies occurs, due to the C=O---Lewis acid sites (LAS) interaction. In the presence of water, a smaller C=O shift due to C=O---HO(H)LAS was observed. Moreover, displacement of the 001 plane in some layer materials confirmed the effect of water on the color changes displayed by UV-Vis spectroscopy. Based on these premises, it was concluded that weak electron donor-acceptor interactions took place between thioindigo functional groups (electron donors) and LAS of the aluminum silicate framework (electron acceptor). LAS (extra-framework aluminum and exchangeable cations) high hydration enthalpy made them extremely susceptible to water molecules (electron donors); generating a hydrogen bond between the two sites. The reversibility of these chromatic hybrid materials could have potential applications as water sensors and charge transfer photosensitizers in nanocrystalline TiO2-based solar cells.

Klystron having electrostatic quadrupole focusing arrangement

DOEpatents

Maschke, Alfred W.

1983-08-30

A klystron includes a source for emitting at least one electron beam, and an accelerator for accelarating the beam in a given direction through a number of drift tube sections successively aligned relative to one another in the direction of the beam. A number of electrostatic quadrupole arrays are successively aligned relative to one another along at least one of the drift tube sections in the beam direction for focusing the electron beam. Each of the electrostatic quadrupole arrays forms a different quadrupole for each electron beam. Two or more electron beams can be maintained in parallel relationship by the quadrupole arrays, thereby enabling space charge limitations encountered with conventional single beam klystrons to be overcome.

Klystron having electrostatic quadrupole focusing arrangement

DOEpatents

Maschke, A.W.

1983-08-30

A klystron includes a source for emitting at least one electron beam, and an accelerator for accelerating the beam in a given direction through a number of drift tube sections successively aligned relative to one another in the direction of the beam. A number of electrostatic quadrupole arrays are successively aligned relative to one another along at least one of the drift tube sections in the beam direction for focusing the electron beam. Each of the electrostatic quadrupole arrays forms a different quadrupole for each electron beam. Two or more electron beams can be maintained in parallel relationship by the quadrupole arrays, thereby enabling space charge limitations encountered with conventional single beam klystrons to be overcome. 4 figs.

High-field Transport in Low Symmetry β-Ga2O3 Crystal

NASA Astrophysics Data System (ADS)

Ghosh, Krishnendu; Singisetti, Uttam

High-field carrier transport plays an important role in many disciplines of electronics. Conventional transport theories work well on high-symmetry materials but lacks insight as the crystal symmetry goes down. Newly emerging materials, many of which possess low symmetry, demand more rigorous treatment of charge transport. We will present a comprehensive study of high-field transport using ab initio electron-phonon interaction (EPI) elements in a full-band Monte Carlo (FBMC) algorithm. We use monoclinic β-Ga2O3 as a benchmark low-symmetry material which is also an emerging wide-bandgap semiconductor. β-Ga2O3 has a C2m space group and a 10 atom primitive cell. In this work the EPIs are calculated under density-functional perturbation theory framework. We will focus on the computational challenges arising from many phonon modes and low crystal symmetry. Significant insights will be presented on the details of energy relaxation by the hot electrons mediated by different phonon modes. We will also show the velocity-field curves of electrons in different crystal directions. The authors acknowledge the support from the National Science Foundation Grant (ECCS 1607833). The authors also acknowledge the computing support provided by the Center for Computational Research at the University at Buffalo.

Transition Metal-Involved Photon Upconversion.

PubMed

Ye, Shi; Song, En-Hai; Zhang, Qin-Yuan

2016-12-01

Upconversion (UC) luminescence of lanthanide ions (Ln 3+ ) has been extensively investigated for several decades and is a constant research hotspot owing to its fundamental significance and widespread applications. In contrast to the multiple and fixed UC emissions of Ln 3+ , transition metal (TM) ions, e.g., Mn 2+ , usually possess a single broadband emission due to its 3 d 5 electronic configuration. Wavelength-tuneable single UC emission can be achieved in some TM ion-activated systems ascribed to the susceptibility of d electrons to the chemical environment, which is appealing in molecular sensing and lighting. Moreover, the UC emissions of Ln 3+ can be modulated by TM ions (specifically d -block element ions with unfilled d orbitals), which benefits from the specific metastable energy levels of Ln 3+ owing to the well-shielded 4 f electrons and tuneable energy levels of the TM ions. The electric versatility of d 0 ion-containing hosts ( d 0 normally viewed as charged anion groups, such as MoO 6 6- and TiO 4 4- ) may also have a strong influence on the electric dipole transition of Ln 3+ , resulting in multifunctional properties of modulated UC emission and electrical behaviour, such as ferroelectricity and oxide-ion conductivity. This review focuses on recent advances in the room temperature (RT) UC of TM ions, the UC of Ln 3+ tuned by TM or d 0 ions, and the UC of d 0 ion-centred groups, as well as their potential applications in bioimaging, solar cells and multifunctional devices.

Transition Metal‐Involved Photon Upconversion

PubMed Central

Song, En‐Hai

2016-01-01

Upconversion (UC) luminescence of lanthanide ions (Ln3+) has been extensively investigated for several decades and is a constant research hotspot owing to its fundamental significance and widespread applications. In contrast to the multiple and fixed UC emissions of Ln3+, transition metal (TM) ions, e.g., Mn2+, usually possess a single broadband emission due to its 3d 5 electronic configuration. Wavelength‐tuneable single UC emission can be achieved in some TM ion‐activated systems ascribed to the susceptibility of d electrons to the chemical environment, which is appealing in molecular sensing and lighting. Moreover, the UC emissions of Ln3+ can be modulated by TM ions (specifically d‐block element ions with unfilled d orbitals), which benefits from the specific metastable energy levels of Ln3+ owing to the well‐shielded 4f electrons and tuneable energy levels of the TM ions. The electric versatility of d 0 ion‐containing hosts (d 0 normally viewed as charged anion groups, such as MoO6 6‐ and TiO4 4‐) may also have a strong influence on the electric dipole transition of Ln3+, resulting in multifunctional properties of modulated UC emission and electrical behaviour, such as ferroelectricity and oxide‐ion conductivity. This review focuses on recent advances in the room temperature (RT) UC of TM ions, the UC of Ln3+ tuned by TM or d 0 ions, and the UC of d 0 ion‐centred groups, as well as their potential applications in bioimaging, solar cells and multifunctional devices. PMID:27981015

Adolescents’ and Young Adults’ Perceptions of Electronic Cigarettes for Smoking Cessation: A Focus Group Study

PubMed Central

Camenga, Deepa R.; Cavallo, Dana A.; Kong, Grace; Morean, Meghan E.; Connell, Christian M.; Simon, Patricia; Bulmer, Sandra M.

2015-01-01

Introduction: Research has shown that adults perceive that electronic cigarettes (e-cigarettes) are effective for smoking cessation, yet little is known about adolescents and young adults’ perceptions of e-cigarettes for quitting cigarette smoking. This study describes middle, high school, and college students’ beliefs about, and experiences with, e-cigarettes for cigarette smoking cessation. Methods: We conducted 18 focus groups (n = 127) with male and female cigarette smokers and nonsmokers in 2 public colleges, 2 high schools, and 1 middle school in Connecticut between November 2012 and April 2013. Participants discussed cigarette smoking cessation in relation to e-cigarettes. Verbatim transcripts were analyzed using thematic analysis. Results: All participants, regardless of age and smoking status, were aware that e-cigarettes could be used for smoking cessation. College and high school participants described different methods of how e-cigarettes could be used for smoking cessation: (a) nicotine reduction followed by cessation; (b) cigarette reduction/dual use; and (c) long-term exclusive e-cigarette use. However, overall, participants did not perceive that e-cigarette use led to successful quitting experiences. Participants described positive attributes (maintenance of smoking actions, “healthier” alternative to cigarettes, and parental approval) and negative attributes (persistence of craving, maintenance of addiction) of e-cigarettes for cessation. Some college students expressed distrust of marketing of e-cigarettes for smoking cessation. Conclusions: Adolescent and young adult smokers and nonsmokers perceive that there are several methods of using e-cigarettes for quitting and are aware of both positive and negative aspects of the product. Future research is needed to determine the role of e-cigarettes for smoking cessation in this population. PMID:25646346

Electron acceleration by a focused laser pulse in a static magnetic field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang Shihua; Wu Fengmin; Zhao Xianghao

2007-12-15

The model given by K. P. Singh [Phys. Rev. E 69, 056410 (2004)] for vacuum laser acceleration in a static magnetic field is revisited by including the effects of diffraction and the longitudinal electric field of a focused laser beam. Compared with a similar model without a static magnetic field, a simulation shows that electrons can gain much more net energy in this model even using the fifth-order corrected equations for the field of a focused laser beam. The acceleration mechanism and the acceleration efficiency are also investigated.

Self-focusing of a high current density ion beam extracted with concave electrodes in a low energy region around 150 eV.

PubMed

Hirano, Y; Kiyama, S; Koguchi, H; Sakakita, H

2014-02-01

Spontaneous self-focusing of ion beam with high current density (Jc ∼ 2 mA/cm(2), Ib ∼ 65 mA) in low energy region (∼150 eV) is observed in a hydrogen ion beam extracted from an ordinary bucket type ion source with three electrodes having concave shape (acceleration, deceleration, and grounded electrodes). The focusing appears abruptly in the beam energy region over ∼135-150 eV, and the Jc jumps up from 0.7 to 2 mA/cm(2). Simultaneously a strong electron flow also appears in the beam region. The electron flow has almost the same current density. Probably these electrons compensate the ion space charge and suppress the beam divergence.

Self-excitation of microwave oscillations in plasma-assisted slow-wave oscillators by an electron beam with a movable focus

NASA Astrophysics Data System (ADS)

Bliokh, Yu. P.; Nusinovich, G. S.; Shkvarunets, A. G.; Carmel, Y.

2004-10-01

Plasma-assisted slow-wave oscillators (pasotrons) operate without external magnetic fields, which makes these devices quite compact and lightweight. Beam focusing in pasotrons is provided by ions, which appear in the device due to the impact ionization of a neutral gas by beam electrons. Typically, the ionization time is on the order of the rise time of the beam current. This means that, during the rise of the current, beam focusing by ions becomes stronger. Correspondingly, a beam of electrons, which was initially diverging radially due to the self-electric field, starts to be focused by ions, and this focus moves towards the gun as the ion density increases. This feature makes the self-excitation of electromagnetic (em) oscillations in pasotrons quite different from practically all other microwave sources where em oscillations are excited by a stationary electron beam. The process of self-excitation of em oscillations has been studied both theoretically and experimentally. It is shown that in pasotrons, during the beam current rise the amount of current entering the interaction space and the beam coupling to the em field vary. As a result, the self-excitation can proceed faster than in conventional microwave sources with similar operating parameters such as the operating frequency, cavity quality-factor and the beam current and voltage.

Focused electron beam based direct-write fabrication of graphene and amorphous carbon from oxo-functionalized graphene on silicon dioxide.

PubMed

Schindler, Severin; Vollnhals, Florian; Halbig, Christian E; Marbach, Hubertus; Steinrück, Hans-Peter; Papp, Christian; Eigler, Siegfried

2017-01-25

Controlled patterning of graphene is an important task towards device fabrication and thus is the focus of current research activities. Graphene oxide (GO) is a solution-processible precursor of graphene. It can be patterned by thermal processing. However, thermal processing of GO leads to decomposition and CO 2 formation. Alternatively, focused electron beam induced processing (FEBIP) techniques can be used to pattern graphene with high spatial resolution. Based on this approach, we explore FEBIP of GO deposited on SiO 2 . Using oxo-functionalized graphene (oxo-G) with an in-plane lattice defect density of 1% we are able to image the electron beam-induced effects by scanning Raman microscopy for the first time. Depending on electron energy (2-30 keV) and doses (50-800 mC m -2 ) either reduction of GO or formation of permanent lattice defects occurs. This result reflects a step towards controlled FEBIP processing of oxo-G.

Annular Focused Electron/Ion Beams for Combining High Spatial Resolution with High Probe Current.

PubMed

Khursheed, Anjam; Ang, Wei Kean

2016-10-01

This paper presents a proposal for reducing the final probe size of focused electron/ion beam columns that are operated in a high primary beam current mode where relatively large final apertures are used, typically required in applications such as electron beam lithography, focused ion beams, and electron beam spectroscopy. An annular aperture together with a lens corrector unit is used to replace the conventional final hole-aperture, creating an annular ring-shaped primary beam. The corrector unit is designed to eliminate the first- and second-order geometric aberrations of the objective lens, and for the same probe current, the final geometric aberration limited spot size is predicted to be around a factor of 50 times smaller than that of the corresponding conventional hole-aperture beam. Direct ray tracing simulation is used to illustrate how a three-stage core lens corrector can be used to eliminate the first- and second-order geometric aberrations of an electric Einzel objective lens.

Laser Wakefield Acceleration Experiments Using HERCULES Laser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuoka, T.; McGuffey, C.; Dollar, F.

2009-07-25

Laser wakefield acceleration (LWFA) in a supersonic gas-jet using a self-guided laser pulse was studied by changing laser power and plasma electron density. The recently upgraded HERCULES laser facility equipped with wavefront correction enables a peak intensity of 6.1x10{sup 19} W/cm{sup 2} at laser power of 80 TW to be delivered to the gas-jet using F/10 focusing optics. We found that electron beam charge was increased significantly with an increase of laser power from 30 TW to 80 TW and showed density threshold behavior at a fixed laser power. We also studied the influence of laser focusing conditions by changingmore » the f-number of the optics to F/15 and found an increase in density threshold for electron production compared to the F/10 configuration. The analysis of different phenomena such as betatron motion of electrons, side scattering of the laser pulse for different focusing conditions, the influence of plasma density down ramp on LWFA are shown.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsutani, Takaomi; Taya, Masaki; Ikuta, Takashi

A parallel image detection system using an annular pupil for electron optics were developed to realize an increase in the depth of focus, aberration-free imaging and separation of amplitude and phase images under scanning transmission electron microscopy (STEM). Apertures for annular pupils able to suppress high-energy electron scattering were developed using a focused ion beam (FIB) technique. The annular apertures were designed with outer diameter of oe 40 {mu}m and inner diameter of oe32 {mu}m. A taper angle varying from 20 deg. to 1 deg. was applied to the slits of the annular apertures to suppress the influence of high-energymore » electron scattering. Each azimuth angle image on scintillator was detected by a multi-anode photomultiplier tube assembly through 40 optical fibers bundled in a ring shape. To focus the image appearing on the scintillator on optical fibers, an optical lens relay system attached with CCD camera was developed. The system enables the taking of 40 images simultaneously from different scattered directions.« less

Production of hard X rays in a plasma focus

NASA Technical Reports Server (NTRS)

Newman, C. E.; Petrosian, V.

1975-01-01

A model of a plasma focus is examined wherein large axial electric fields are produced by an imploding current sheet during the final nanoseconds of the collapse phase and where the fields provide a mechanism for creating a beam of electrons of highly suprathermal energies. The expected bremsstrahlung radiation above 100 keV is calculated for such a beam, which has a power-law spectrum, both from electron-deuteron collisions in the focused plasma and when the beam reaches the wall of the device. It is concluded that, since the experimental results indicate little or no radiation above 100 keV originating in the walls, that the electrons in the beam must be decelerated after leaving the plasma and before reaching the wall. Comparisons with the results and the total energy of the device yield qualitative agreement with the expected angular distribution of hard X-rays and reasonable agreement with the total energy in accelerated electrons required to produce the observed total energy in hard X-rays by this mechanism.

Ion Emittance Growth Due to Focusing Modulation from Slipping Electron Bunch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, G.

2015-02-17

Low energy RHIC operation has to be operated at an energy ranging from γ = 4.1 to γ = 10. The energy variation causes the change of revolution frequency. While the rf system for the circulating ion will operate at an exact harmonic of the revolution frequency (h=60 for 4.5 MHz rf and h=360 for 28 MHz rf.), the superconducting rf system for the cooling electron beam does not have a frequency tuning range that is wide enough to cover the required changes of revolution frequency. As a result, electron bunches will sit at different locations along the ion bunchmore » from turn to turn, i.e. the slipping of the electron bunch with respect to the circulating ion bunch. At cooling section, ions see a coherent focusing force due to the electrons’ space charge, which differs from turn to turn due to the slipping. We will try to estimate how this irregular focusing affects the transverse emittance of the ion bunch.« less

Ion Fast Ignition-Establishing a Scientific Basis for Inertial Fusion Energy --- Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, Richard Burnite; Foord, Mark N.; Wei, Mingsheng

The Fast Ignition (FI) Concept for Inertial Confinement Fusion (ICF) has the potential to provide a significant advance in the technical attractiveness of Inertial Fusion Energy reactors. FI differs from conventional ?central hot spot? (CHS) target ignition by decoupling compression from heating: using a laser (or heavy ion beam or Z pinch) drive pulse (10?s of nanoseconds) to create a dense fuel and a second, much shorter (~10 picoseconds) high intensity pulse to ignite a small volume within the dense fuel. The compressed fuel is opaque to laser light. The ignition laser energy must be converted to a jet ofmore » energetic charged particles to deposit energy in the dense fuel. The original concept called for a spray of laser-generated hot electrons to deliver the energy; lack of ability to focus the electrons put great weight on minimizing the electron path. An alternative concept, proton-ignited FI, used those electrons as intermediaries to create a jet of protons that could be focused to the ignition spot from a more convenient distance. Our program focused on the generation and directing of the proton jet, and its transport toward the fuel, none of which were well understood at the onset of our program. We have developed new experimental platforms, diagnostic packages, computer modeling analyses, and taken advantage of the increasing energy available at laser facilities to create a self-consistent understanding of the fundamental physics underlying these issues. Our strategy was to examine the new physics emerging as we added the complexity necessary to use proton beams in an inertial fusion energy (IFE) application. From the starting point of a proton beam accelerated from a flat, isolated foil, we 1) curved it to focus the beam, 2) attached the foil to a superstructure, 3) added a side sheath to protect it from the surrounding plasma, and finally 4) studied the proton beam behavior as it passed through a protective end cap into plasma. We built up, as we proceeded, a self-consistent picture of the quasi-neutral plasma jet that is the proton beam that, for the first time, included the role of the hot electrons in shaping the jet. Controlling them?through design of the accelerating surface and its connection to the surrounding superstructure?is critical; their uniform spread across the proton accelerating area is vital, but their presence in the jet opposes focus; their electron flow away from the acceleration area reduces conversion efficiency but can also increase focusing ability. The understanding emerging from our work and the improved simulation tools we have developed allow designing structures that optimize proton beams for focused heating. Our findings include: ? The achievable focus of proton beams is limited by the thermal pressure gradient in the laser-generated hot electrons that drive the process. This bending can be suppressed using a controlled flow of hot electrons along the surrounding cone wall, which induces a local transverse focusing sheath electric field. The resultant (vacuum-focused) spot can meet IFE requirements. ? Confinement of laser-generated electrons to the proton accelerating area can be achieved by supporting targets on thin struts. That increases laser-to-proton conversion energy by ~50%. As noted above, confinement should not be total; necessary hot-electron leakage into the surrounding superstructure for proton focusing can be controlled by with the strut width/number. ? Proton jets are further modified as they enter the fuel through the superstructure?s end cap. They can generate currents during that transit that further focus the proton beams. We developed a new ion stopping module for LSP code that properly accounted for changes in stopping power with ionization (e.g. temperature), and will be using it in future studies. The improved understanding, new experimental platforms, and the self-consistent modeling capability allow researchers a new ability to investigate the interaction of large ion currents with warm dense matter. That is of direct importance to the creation and investigation of all aspects of warm dense matter as well as to proton-ignited FI.« less

Selection criteria and facilitation training for the study of groupware

NASA Technical Reports Server (NTRS)

Robichaux, Barry P.

1993-01-01

Computer support for planning and decision making groups is a growing trend in the 90s. Groupware is a name often applied to group software and has been defined as 'computer-based systems that support groups engaged in a common task (or goal) and that provide an interface to a shared environment'. Unlike most single-user software, groupware assists user groups in their collaboration, coordination, and communication efforts. This paper focuses on groupware to support the meeting process. These systems are often called group decision support systems (GDSS), electronic meeting systems (EMS), or group support systems (GSS). The term 'meeting support groupware' is used here to include any computer-based system to support meetings. In order to understand this technology, one must first understand groups, what they do and the problems they face, and groupware, a wide range of technology to support group work. Guidelines for selecting groups for study as part of an overall research plan are provided in this document. These were taken from the literature and from persons for whom the information in this paper was targeted. Also, guidelines for facilitation training are discussed. Familiarity with known and accepted techniques are the principle duties of the facilitator and any form of training must include practice in using these techniques.

[Opinions and nurse' satisfaction with INICIARE 2.0 scale: A qualitative study in a hospital setting].

PubMed

Porcel-Gálvez, Ana María; Hörner Schlindwein-Meirelles, Betina; Gil-García, Eugenia; Morales-Asencio, José Miguel; Guerra-Martín, María Dolores

To know the opinions and satisfaction of nurses with the use of INICIARE, an instrument developed for assessment of nursing care needs in hospitalized patients. INICIARE is based on Virginia Henderson's conceptual model, and built up with indicators of Nursing Outcomes Classification (NOC) taxonomy. Exploratory qualitative study, using focus group technique for data collection. The sessions were recorded until saturation of information. A content analysis of syntactic, semantic and pragmatic levels of transcripts was performed. Participants' informed consent was obtained. Three focus groups were developed; 24 nurses from two Public Hospitals in Andalusia (Southern Spain) participated; and four thematic categories were created to measure satisfaction with the instrument. INICIARE helped the nursing process. Its closed format, and items in NOC taxonomy streamline evaluation, facilitates its inclusion in Electronic Information Systems, and strengthens effective communication at all levels. Nurses are satisfied with the use of INICIARE scale as a tool to enhance quality of care. It also has potential to be used as a tool for decision making in management of nursing care. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

The role of paediatric nurses in medication safety prior to the implementation of electronic prescribing: a qualitative case study.

PubMed

Farre, Albert; Heath, Gemma; Shaw, Karen; Jordan, Teresa; Cummins, Carole

2017-04-01

Objectives To explore paediatric nurses' experiences and perspectives of their role in the medication process and how this role is enacted in everyday practice. Methods A qualitative case study on a general surgical ward of a paediatric hospital in England, one year prior to the planned implementation of ePrescribing. Three focus groups and six individual semi-structured interviews were conducted, involving 24 nurses. Focus groups and interviews were audio-recorded, transcribed, anonymized and subjected to thematic analysis. Results Two overarching analytical themes were identified: the centrality of risk management in nurses' role in the medication process and the distributed nature of nurses' medication risk management practices. Nurses' contribution to medication safety was seen as an intrinsic feature of a role that extended beyond just preparing and administering medications as prescribed and placed nurses at the heart of a dynamic set of interactions, practices and situations through which medication risks were managed. These findings also illustrate the collective nature of patient safety. Conclusions Both the recognized and the unrecognized contributions of nurses to the management of medications needs to be considered in the design and implementation of ePrescribing systems.

Advances in Behavioral Laboratory Methods that Inform Tobacco Regulatory Science: A TCORS Working Group Special Issue

PubMed Central

Wright, M. Jerry; Valentine, Gerald

2017-01-01

Objective The 2009 Family Smoking Prevention and Tobacco Control Act (TCA) created unprecented enabling conditions for establishing national regulatory policy that reduces the burden of public health and societal problems associated with tobacco product use. The Center for Tobacco Products (CTP), created by the FDA to implement the TCA, developed a first-of-its-kind FDA/National Institutes of Health (NIH) collaborative program to fund Tobacco Centers of Regulatory Science (TCORS). Methods To assist the TCORS with addressing research priorites, working groups (WGs) comprised of FDA-CTP liasions and TCORS investigators were formed. Under the direction of the Center for Evaluation and Coordination of Trainin and Research (CECTR), the TCORS WGs seek to develop tangible work products in their respective areas of focus. Results The focus of the behavioral pharmacology WG evolved from publishing a narrow paper on behavioral methods in electronic cigarette research to a collection of papers on advances in behavioral laboratory methods that may inform tobacco regulatory science. Conclusion This Special Issue contains articles that address all of the CTP research priorities and demonstrates how advances in behavioral laboratory methods made by TCORS investigators can inform FDA efforst to regulate tobacco products. PMID:29152546

Perceptions of effective and ineffective nurse-physician communication in hospitals.

PubMed

Robinson, F Patrick; Gorman, Geraldine; Slimmer, Lynda W; Yudkowsky, Rachel

2010-01-01

Nurse-physician communication affects patient safety. Such communication has been well studied using a variety of survey and observational methods; however, missing from the literature is an investigation of what constitutes effective and ineffective interprofessional communication from the perspective of the professionals involved. The purpose of this study was to explore nurse and physician perceptions of effective and ineffective communication between the two professions. Using focus group methodology, we asked nurses and physicians with at least 5 years' acute care hospital experience to reflect on effective and ineffective interprofessional communication and to provide examples. Three focus groups were held with 6 participants each (total sample 18). Sessions were audio recorded and transcribed verbatim. Transcripts were coded into categories of effective and ineffective communication. The following themes were found. For effective communication: clarity and precision of message that relies on verification, collaborative problem solving, calm and supportive demeanor under stress, maintenance of mutual respect, and authentic understanding of the unique role. For ineffective communication: making someone less than, dependence on electronic systems, and linguistic and cultural barriers. These themes may be useful in designing learning activities to promote effective interprofessional communication.

An adjustable short-focal length, high-gradient PMQ electron-beam final-focus system for the PLEIADES ultra-fast x-ray Thomson source

NASA Astrophysics Data System (ADS)

Lim, Jae-Ku

In the span of a 100 year since the discovery of first x-rays by Roentgen that won him the first Nobel prize in physics, several types of radiation sources have been developed. Currently, radiations at extremely short wavelengths have only been accessed at synchrotron radiation sources. However, the current 3rd generation synchrotron sources can only produce x-rays of energy up to 60 keV and pulse lengths of several picoseconds long. But needs for shorter wavelength and shorter pulse duration radiations demanded by scientists to understand the nature of matter at atomic/molecular scale initiated the new scientific research for the production of sub-picosecond, hard x-rays. At the Lawrence Livermore National Laboratory, a Thomson x-ray source in the backscattering mode---a head-on collision between a high intensity Ti:Sapphire Chirped Pulse Amplification laser and a relativistic electron beam---called the PLEIADES (Picosecond Laser-Electron Inter-Action for the Dynamical Evaluation of Structures) laboratory has been developed. Early works demonstrated the production of quasi-monochromatic, femto-second long, hard x-rays. Initially reported x-ray flux was in the low range of 105--10 6 photons per shot. During the early stage of PLEIADES experiments, 15 T/m electromagnet final focusing quadrupoles (in a triplet lattice configuration) were employed to focus the beam to a 40-50 mum spot-size. A larger focal spot-size beam has a low-density of electron particles available at the interaction with incident photons, which leads to a low scattering probability. The current dissertation shows that by employing a 560 T/m PMQ (Permanent-Magnet Quadrupole) final focus system, an electron beam as small as 10-20 mum can be achieved. The implementation of this final focus system demonstrated the improvement of the total x-ray flux by two orders of magnitude. The PMQ final focus system also produced small electron beams consistently over 30-100 MeV electron beam energy, which enabled the production of x-ray energy over 40-140 keV. In this dissertation, the PLEIADES Thomson x-ray facility will be described in detail includes the 100 MeV linac and the FALCON laser system. Later, we will discuss the design, construction and implementation of the PMQ final focus system in the beamline. The measurement of electron beam parameters before and after the final focus system will be presented. The beam measurements at the interaction region were accomplished with the use of both OTR (Optical Transition Radiation) imaged by a CCD camera and the fast streak camera for respective spatial and temporal alignments. The theoretical analysis in "real beam" effects and spacetime beam jitter effects will be given to help understand the observations. A 3D simulation tool developed for x-ray data analysis was used to provide direct comparisons with the x-ray flux, spectrum distribution and transverse x-ray profile.

Simulation study on the spatial and temporal characteristics of focused microwave beam discharge in nitrogen

NASA Astrophysics Data System (ADS)

Yang, Wei; Zhou, Qianhong; Dong, Zhiwei

2018-01-01

This paper reports a simulation study on a focused microwave (frequency 9.4 GHz, pulse width 2.5 μs, and peak electric field 1.2 kV/cm) discharge in 200 Pa nitrogen. A one-dimensional (1D) fluid model is based on the wave equation for the microwave field propagating through the gas breakdown plasma, the continuity equations for electron, ion and neutral particle densities, and the energy balance equations for mean electron temperature, and nitrogen vibrational and translational temperatures. These equations are numerically solved in a self-consistent manner with a simplified plasma chemistry set, in which the reaction rates involving electrons are calculated from the electron energy distribution function (EEDF) using a two-term expansion method. The spatial and temporal characteristics of the focused microwave breakdown in nitrogen are demonstrated, which include the amplitude of the microwave electric field, and the densities and temperatures of the plasma components. The temporal evolution of the plasma electron density agrees reasonably well with that measured with a microwave interferometer. The spatial-temporal distributions of metastable states are discussed on the plasma chemistry and the character of mean electron temperature. The spatially integrated N2(C3) density shows similar trends with the measured temporal intensity of optical emission spectroscopy, except for a time delay of 100-300 ns. The quantitative discrepancies are explained in light of limitations of the 1D model with a two-term expansion of EEDF. The theoretical model is found to describe the gas breakdown plasma generated by focused microwave beams at least qualitatively.

Progress on complementary patterning using plasmon-excited electron beamlets (Conference Presentation)

NASA Astrophysics Data System (ADS)

Du, Zhidong; Chen, Chen; Pan, Liang

2017-04-01

Maskless lithography using parallel electron beamlets is a promising solution for next generation scalable maskless nanolithography. Researchers have focused on this goal but have been unable to find a robust technology to generate and control high-quality electron beamlets with satisfactory brightness and uniformity. In this work, we will aim to address this challenge by developing a revolutionary surface-plasmon-enhanced-photoemission (SPEP) technology to generate massively-parallel electron beamlets for maskless nanolithography. The new technology is built upon our recent breakthroughs in plasmonic lenses, which will be used to excite and focus surface plasmons to generate massively-parallel electron beamlets through photoemission. Specifically, the proposed SPEP device consists of an array of plasmonic lens and electrostatic micro-lens pairs, each pair independently producing an electron beamlet. During lithography, a spatial optical modulator will dynamically project light onto individual plasmonic lenses to control the switching and brightness of electron beamlets. The photons incident onto each plasmonic lens are concentrated into a diffraction-unlimited spot as localized surface plasmons to excite the local electrons to near their vacuum levels. Meanwhile, the electrostatic micro-lens extracts the excited electrons to form a focused beamlet, which can be rastered across a wafer to perform lithography. Studies showed that surface plasmons can enhance the photoemission by orders of magnitudes. This SPEP technology can scale up the maskless lithography process to write at wafers per hour. In this talk, we will report the mechanism of the strong electron-photon couplings and the locally enhanced photoexcitation, design of a SPEP device, overview of our proof-of-concept study, and demonstrated parallel lithography of 20-50 nm features.

Geometry dependence of electron donating or accepting abilities of amine groups in 4,4‧-disulfanediylbis(methylene)dithiazol-2-amine: Pyramidal versus planar

NASA Astrophysics Data System (ADS)

Karabıyık, Hasan; Kırılmış, Cumhur; Karabıyık, Hande

2017-08-01

The molecular and crystal structure of the title compound in which two thiazole-2-amine rings are linked to each other by disulfide bridge (sbnd Csbnd Ssbnd Ssbnd Csbnd) were studied by single-crystal X-ray diffraction, FT-IR, NMR spectroscopy, quantum chemical calculations and topological analyses on the electron density. A novel synthesis route for the compounds having symmetrical disulfide bridge is reported. The most important result regarding the compound is about electron donating or accepting properties of the terminal amine groups. Planar amine group acts as an electron-donating group, while pyramidal amine behaves as electron-accepting group. This inference was confirmed by scrutiny of crystallographic geometry and quantum chemical studies. To ascertain underlying reasons for this fact, intermolecular interactions (Nsbnd H⋯N type H-bonds and Csbnd H···π interactions) were studied. These interactions involving aromatic thiazole rings are verified by topological electron density and Hirshfeld surface analyses. Intermolecular interactions do not have an effect on the differentiation in electron donating or accepting ability of amine groups, because both amine groups are involved in Nsbnd H⋯N type H-bonds. In methodological sense, it has been understood that Ehrenfest forces acting on electron density are useful theoretical probe to analyze intra-molecular charge transfer processes.

Acceleration of electron bunches by intense laser pulse in vacuum

NASA Astrophysics Data System (ADS)

Hua, J. F.; Ho, Y. K.; Lin, Y. Z.; Cao, N.

2003-08-01

This paper addresses the output characteristics of real electron bunches accelerated with ultra-intense laser pulse in vacuum by the capture & acceleration scenario (CAS) scheme (see, e.g., Phys. Rev. E66 (2002) 066501). Normally, the size of an electron bunch is much larger than that of a tightly focused and compressed laser pulse. We examine in detail the features of the intersection region, the distribution of electrons which can experience an intense laser field and be accelerated to high energy. Furthermore, the output properties of the accelerated CAS electrons, such as the energy spectra, the angular distributions, the energy-angle correlations, the acceleration gradient, the energy which can be reached with this scheme, the emittances of the outgoing electron bunches, and the dependence of the output properties on the incident electron beam qualities such as the emittance, focusing status, etc. were studied and explained. We found that with intense laser systems and electron beam technology currently available nowadays, the number of CAS electrons can reach 10 4-10 5, when the total number of incident electrons in the practical bunch reaches ˜10 8. These results demonstrate that CAS is promising to become a novel mechanism of vacuum laser accelerators.

Technology-enhanced focus groups as a component of instrument development.

PubMed

Strout, Tania D; DiFazio, Rachel L; Vessey, Judith A

2017-06-22

Background Bullying is a critical public health problem and a screening tool for use in healthcare is needed. Focus groups are a common tool for generating qualitative data when developing an instrument and evidence suggests that technology-enhanced focus groups can be effective in simultaneously engaging participants from diverse settings. Aim To examine the use of technology-enhanced focus groups in generating an item pool to develop a youth-bullying screening tool. Discussion The authors explore methodological and ethical issues related to conducting technology-enhanced focus groups, drawing on their experience in developing a youth-bullying measure. They conducted qualitative focus groups with professionals from the front lines of bullying response and intervention. They describe the experience of conducting technology-enhanced focus group sessions, focusing on the methodological and ethical issues that researchers engaging in similar work may encounter. Challenges associated with this methodology include establishing rapport among participants, privacy concerns and limited non-verbal communication. Conclusion The use of technology-enhanced focus groups can be valuable in obtaining rich data from a wide variety of disciplines and contexts. Organising these focus groups was inexpensive and preferred by the study's participants. Implications for practice Researchers should consider using technology-enhanced focus groups to generate data to develop health-related measurement tools.

Phylogenetic analysis of proteins associated in the four major energy metabolism systems: photosynthesis, aerobic respiration, denitrification, and sulfur respiration.

PubMed

Tomiki, Takeshi; Saitou, Naruya

2004-08-01

The four electron transfer energy metabolism systems, photosynthesis, aerobic respiration, denitrification, and sulfur respiration, are thought to be evolutionarily related because of the similarity of electron transfer patterns and the existence of some homologous proteins. How these systems have evolved is elusive. We therefore conducted a comprehensive homology search using PSI-BLAST, and phylogenetic analyses were conducted for the three homologous groups (groups 1-3) based on multiple alignments of domains defined in the Pfam database. There are five electron transfer types important for catalytic reaction in group 1, and many proteins bind molybdenum. Deletions of two domains led to loss of the function of binding molybdenum and ferredoxin, and these deletions seem to be critical for the electron transfer pattern changes in group 1. Two types of electron transfer were found in group 2, and all its member proteins bind siroheme and ferredoxin. Insertion of the pyridine nucleotide disulfide oxidoreductase domain seemed to be the critical point for the electron transfer pattern change in this group. The proteins belonging to group 3 are all flavin enzymes, and they bind flavin adenine dinucleotide (FAD) or flavin mononucleotide (FMN). Types of electron transfer in this group are divergent, but there are two common characteristics. NAD(P)H works as an electron donor or acceptor, and FAD or FMN transfers electrons from/to NAD(P)H. Electron transfer functions might be added to these common characteristics by the addition of functional domains through the evolution of group 3 proteins. Based on the phylogenetic analyses in this study and previous studies, we inferred the phylogeny of the energy metabolism systems as follows: photosynthesis (and possibly aerobic respiration) and the sulfur/nitrogen assimilation system first diverged, then the sulfur/nitrogen dissimilation system was produced from the latter system.

Conformational control of cofactors in nature: The effect of methoxy group orientation on the electronic structure of ubisemiquinone

NASA Astrophysics Data System (ADS)

De Almeida, Wagner B.; O'Malley, Patrick J.

2018-03-01

Ubiquinone is the key electron and proton transfer agent in biology. Its mechanism involves the formation of its intermediate one-electron reduced form, the ubisemiquinone radical. This is formed in a protein-bound form which permits the semiquinone to vary its electronic and redox properties. This can be achieved by hydrogen bonding acceptance by one or both oxygen atoms or as we now propose by restricted orientations for the methoxy groups of the headgroup. We show how the orientation of the two methoxy groups of the quinone headgroup affects the electronic structure of the semiquinone form and demonstrate a large dependence of the ubisemiquinone spin density distribution on the orientation each methoxy group takes with respect to the headgroup ring plane. This is shown to significantly modify associated hyperfine couplings which in turn needs to be accounted for in interpreting experimental values in vivo. The study uncovers the key potential role the methoxy group orientation can play in controlling the electronic structure and spin density of ubisemiquinone and provides an electronic-level insight into the variation in electron affinity and redox potential of ubiquinone as a function of the methoxy orientation. Taken together with the already known influence of cofactor conformation on heme and chlorophyll electronic structure, it reveals a more widespread role for cofactor conformational control of electronic structure and associated electron transfer in biology.

Two-photon or higher-order absorbing optical materials and methods of use

NASA Technical Reports Server (NTRS)

Perry, Joseph (Inventor); Marder, Seth (Inventor)

2001-01-01

Compositions capable of simultaneous two-photon absorption and higher order absorptivities are disclosed. Many of these compositions are compounds satisfying the formulae D-.PI.-D, A-.PI.-A, D-A-D and A-D-A, wherein D is an electron donor group, A is an electron acceptor group and .PI. comprises a bridge of .pi.-conjugated bonds connecting the electron donor groups and electron acceptor groups. In A-D-A and D-A-D compounds, the .pi. bridge is substituted with electron donor groups and electron acceptor groups, respectively. Also disclosed are methods that generate an electronically excited state of a compound, including those satisfying one of these formulae. The electronically excited state is achieved in a method that includes irradiating the compound with light. Then, the compound is converted to a multi-photon electronically excited state upon simultaneous absorption of at least two photons of light. The sum of the energies of all of the absorbed photons is greater than or equal to the transition energy from a ground state of the compound to the multi-photon excited state. The energy of each absorbed photon is less than the transition energy between the ground state and the lowest single-photon excited state of the compound is less than the transition energy between the multi-photon excited state and the ground state.

Electronic prompts significantly increase response rates to postal questionnaires: a randomized trial within a randomized trial and meta-analysis.

PubMed

Clark, Laura; Ronaldson, Sarah; Dyson, Lisa; Hewitt, Catherine; Torgerson, David; Adamson, Joy

2015-12-01

To assess the effectiveness of sending electronic prompts to randomized controlled trial participants to return study questionnaires. A "trial within a trial" embedded within a study determining the effectiveness of chronic obstructive pulmonary disease (DOC) screening on smoking cessation. Those participants taking part in DOC who provided a mobile phone number and/or an electronic mail address were randomized to either receive an electronic prompt or no electronic prompt to return a study questionnaire. The results were combined with two previous studies in a meta-analysis. A total of 437 participants were randomized: 226 to the electronic prompt group and 211 to the control group. A total of 285 (65.2%) participants returned the follow-up questionnaire: 157 (69.5%) in the electronic prompt group and 128 (60.7%) in the control group [difference 8.8%; 95% confidence interval (CI): -0.11%, 17.7%; P = 0.05]. The mean time to response was 23 days in the electronic prompt group and 33 days in the control group (hazard ratio = 1.27; 95% CI: 1.105, 1.47). The meta-analysis of all three studies showed an increase in response rate of 7.1% (95% CI: 0.8%, 13.3%). The use of electronic prompts increased response rates and reduces the time to response. Copyright © 2015 Elsevier Inc. All rights reserved.

An Effort to Increase Organ Donor Registration Through Intergroup Competition and Electronic Word of Mouth.

PubMed

Smith, Sandi W; Hitt, Rose; Park, Hee Sun; Walther, Joseph; Liang, Yuhua Jake; Hsieh, Gary

2016-01-01

The effort to increase Web organ donation registrations in Michigan by enhancing 2 types of university campaigns with social media strategies informed by social identity theory is the focus of this research. The two campaigns focused on either ingroup or rivalry outgroup social identification, and each was enhanced with individually focused social media in the first year of the campaign and with electronic word of mouth in Year 2 of the campaign. Results indicated that individually focused social media such as Facebook ads worked well in rivalry campaigns (in which registrations increased two times over baseline) but not in ingroup identification campaigns (in which registrations decreased significantly over baseline when ads were introduced in the first year of each type of campaign). Electronic word-of-mouth strategies worked well in both ingroup identification campaigns (in which registrations increased two times over baseline) and rivalry campaigns (in which registrations rose almost eight times over baseline, when strategies were introduced in the second year of each type of campaign).

Do Authors of Online Electronic Materials for Teaching Mathematics Use Their Potential to Use Non-Stereotypical Cultural Settings?

ERIC Educational Resources Information Center

Moraová, Hana

2017-01-01

The paper focuses on the cultural content of online electronic materials developed primarily by Czech in-service teachers of mathematics for smartboards. The author presents an analysis of these materials with a focus on the cultural settings of word problems they contain. The paper builds on a poster presented on ECEL 2015 conference and a paper…

Breaches of health information: are electronic records different from paper records?

PubMed

Sade, Robert M

2010-01-01

Breaches of electronic medical records constitute a type of healthcare error, but should be considered separately from other types of errors because the national focus on the security of electronic data justifies special treatment of medical information breaches. Guidelines for protecting electronic medical records should be applied equally to paper medical records.

Engaging children in the development of obesity interventions: exploring outcomes that matter most among obesity positive outliers

PubMed Central

Sharifi, Mona; Marshall, Gareth; Goldman, Roberta E.; Cunningham, Courtney; Marshall, Richard; Taveras, Elsie M

2015-01-01

Objective To explore outcomes and measures of success that matter most to 'positive outlier' children who improved their body mass index (BMI) despite living in obesogenic neighborhoods. Methods We collected residential address and longitudinal height/weight data from electronic health records of 22,657 children ages 6–12 years in Massachusetts. We defined obesity “hotspots” as zip codes where >15% of children had a BMI ≥95th percentile. Using linear mixed effects models, we generated a BMI z-score slope for each child with a history of obesity. We recruited 10–12 year-olds with negative slopes living in hotspots for focus groups. We analyzed group transcripts and discussed emerging themes in iterative meetings using an immersion/crystallization approach. Results We reached thematic saturation after 4 focus groups with 21 children. Children identified bullying and negative peer comparisons related to physical appearance, clothing size, and athletic ability as motivating them to achieve a healthier weight, and they measured success as improvement in these domains. Positive relationships with friends and family facilitated both behavior change initiation and maintenance. Conclusions The perspectives of positive outlier children can provide insight into children’s motivations leading to successful obesity management. Practice implications: Child/family engagement should guide the development of patient-centered obesity interventions. PMID:26166630

Direct observation of dopant distribution in GaAs compound semiconductors using phase-shifting electron holography and Lorentz microscopy.

PubMed

Sasaki, Hirokazu; Otomo, Shinya; Minato, Ryuichiro; Yamamoto, Kazuo; Hirayama, Tsukasa

2014-06-01

Phase-shifting electron holography and Lorentz microscopy were used to map dopant distributions in GaAs compound semiconductors with step-like dopant concentration. Transmission electron microscope specimens were prepared using a triple beam focused ion beam (FIB) system, which combines a Ga ion beam, a scanning electron microscope, and an Ar ion beam to remove the FIB damaged layers. The p-n junctions were clearly observed in both under-focused and over-focused Lorentz microscopy images. A phase image was obtained by using a phase-shifting reconstruction method to simultaneously achieve high sensitivity and high spatial resolution. Differences in dopant concentrations between 1 × 10(19) cm(-3) and 1 × 10(18) cm(-3) regions were clearly observed by using phase-shifting electron holography. We also interpreted phase profiles quantitatively by considering inactive layers induced by ion implantation during the FIB process. The thickness of an inactive layer at different dopant concentration area can be measured from the phase image. © The Author 2014. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Smokers' and ex-smokers' understanding of electronic cigarettes: a qualitative study.

PubMed

Rooke, Catriona; Cunningham-Burley, Sarah; Amos, Amanda

2016-04-01

To explore among a diverse range of smokers and recent ex-smokers, particularly those from disadvantaged groups, how nicotine-containing products, particularly electronic cigarettes (e-cigarettes), are understood and experienced. Qualitative study of 64 smokers and ex-smokers in Central Scotland. Twelve focus groups and 11 individual interviews were carried out with a range of purposively selected groups. Nicotine replacement therapies and e-cigarettes were regarded as being very different products. Nicotine replacement therapies were viewed as medical products for smokers who want to quit, while e-cigarettes emerged as an ambiguous product whose meanings are still being negotiated. Participants' attitudes and intentions about smoking and quitting were especially important in shaping their understanding of these products. Four main interpretations of e-cigarettes were identified: a more satisfying replacement for smoking, an ambiguous but potentially useful device, a less desirable cigarette and a threat to smoking cessation. The acceptability of continued nicotine addiction and the similarity of e-cigarettes to conventional cigarettes were central themes on which participants held conflicting views. There was considerable uncertainty among participants around the constituents and safety of e-cigarettes. Different groups of smokers bring diverse expectations, requirements and concerns to their evaluations and therefore to the potential use of nicotine-containing products. The ambiguity around e-cigarettes in public health debates and medical practice is reflected in the positions and concerns of smokers. There is a need for both clear, up-to-date trustworthy information about their benefits and risks, and stronger regulation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A Randomized Controlled Trial of an Electronic Informed Consent Process

PubMed Central

Rothwell, Erin; Wong, Bob; Rose, Nancy C.; Anderson, Rebecca; Fedor, Beth; Stark, Louisa A.; Botkin, Jeffrey R.

2018-01-01

A pilot study assessed an electronic informed consent model within a randomized controlled trial (RCT). Participants who were recruited for the parent RCT project were randomly selected and randomized to either an electronic consent group (n = 32) or a simplified paper-based consent group (n = 30). Results from the electronic consent group reported significantly higher understanding of the purpose of the study, alternatives to participation, and who to contact if they had questions or concerns about the study. However, participants in the paper-based control group reported higher mean scores on some survey items. This research suggests that an electronic informed consent presentation may improve participant understanding for some aspects of a research study. PMID:25747685

Barriers and facilitators to implementing electronic prescription: a systematic review of user groups' perceptions.

PubMed

Gagnon, Marie-Pierre; Nsangou, Édith-Romy; Payne-Gagnon, Julie; Grenier, Sonya; Sicotte, Claude

2014-01-01

We conducted a systematic review identifying users groups' perceptions of barriers and facilitators to implementing electronic prescription (e-prescribing) in primary care. We included studies following these criteria: presence of an empirical design, focus on the users' experience of e-prescribing implementation, conducted in primary care, and providing data on barriers and facilitators to e-prescribing implementation. We used the Donabedian logical model of healthcare quality (adapted by Barber et al) to analyze our findings. We found 34 publications (related to 28 individual studies) eligible to be included in this review. These studies identified a total of 594 elements as barriers or facilitators to e-prescribing implementation. Most user groups perceived that e-prescribing was facilitated by design and technical concerns, interoperability, content appropriate for the users, attitude towards e-prescribing, productivity, and available resources. This review highlights the importance of technical and organizational support for the successful implementation of e-prescribing systems. It also shows that the same factor can be seen as a barrier or a facilitator depending on the project's own circumstances. Moreover, a factor can change in nature, from a barrier to a facilitator and vice versa, in the process of e-prescribing implementation. This review summarizes current knowledge on factors related to e-prescribing implementation in primary care that could support decision makers in their design of effective implementation strategies. Finally, future studies should emphasize on the perceptions of other user groups, such as pharmacists, managers, vendors, and patients, who remain neglected in the literature.

Patient-Centered Tablet Application for Improving Medication Adherence after a Drug-Eluting Stent.

PubMed

Shah, Vicki; Dileep, Anandu; Dickens, Carolyn; Groo, Vicki; Welland, Betty; Field, Jerry; Baumann, Matthew; Flores, Jose D; Shroff, Adhir; Zhao, Zhongsheng; Yao, Yingwei; Wilkie, Diana J; Boyd, Andrew D

2016-01-01

This study's objective was to evaluate a patient-centered educational electronic tablet application, "My Interventional Drug-Eluting Stent Educational App" (MyIDEA) to see if there was an increase in patient knowledge about dual antiplatelet therapy (DAPT) and medication possession ratio (MPR) compared to treatment as usual. In a pilot project, 24 elderly (≥50 years old) research participants were recruited after a drug-eluting stent. Eleven were randomized to the control arm and 13 to the interventional arm. All the participants completed psychological and knowledge questionnaires. Adherence was assessed through MPR, which was calculated at 3 months for all participants who were scheduled for second and third follow-up visits. Relative to control, the interventional group had a 10% average increase in MPR. As compared to the interventional group, more patients in the control group had poor adherence (<80% MPR). The psychological data revealed a single imbalance in anxiety between the control and interventional groups. On average, interventional participants spent 21 min using MyIDEA. Consumer health informatics has enabled us to engage patients with their health data using novel methods. Consumer health technology needs to focus more on patient knowledge and engagement to improve long-term health. MyIDEA takes a unique approach in targeting DAPT from the onset. MyIDEA leverages patient-centered information with clinical care and the electronic health record highlighting the patients' role as a team member in their own health care. The patients think critically about adverse events and how to solve issues before leaving the hospital.

An assessment of student experiences and learning based on a novel undergraduate e-learning resource.

PubMed

Mehta, S; Clarke, F; Fleming, P S

2016-08-12

Purpose/objectives The aims of this study were to describe the development of a novel e-learning resource and to assess its impact on student learning experiences and orthodontic knowledge.Methods Thirty-two 4th year dental undergraduate students at Queen Mary University of London were randomly allocated to receive electronic access to e-learning material covering various undergraduate orthodontic topics over a 6-week period. Thirty-one control students were not given access during the study period. All students were asked to complete electronic quizzes both before (T0) and after (T1) the study period and a general questionnaire concerning familiarity with e-learning. The test group also completed a user satisfaction questionnaire at T1. Two focus groups were also undertaken to explore learners' experiences and suggestions in relation to the resource.Results The mean quiz result improved by 3.9% and 4.5% in the control and test groups, respectively. An independent t-test, however, demonstrated a lack of statistical significance in knowledge gain between control and test groups (P = 0.941). The qualitative feedback indicated that students believed that use of the resource enhanced knowledge and basic understanding with students expressing a wish to ingrain similar resources in other areas of undergraduate teaching.Conclusions Use of the novel orthodontic e-resource by 4th year undergraduate students over a 6-week period did not result in a significant improvement in subject knowledge. However, the e-learning has proven popular among undergraduates and the resources will continue to be refined.

E-cigarettes, Hookah Pens and Vapes: Adolescent and Young Adult Perceptions of Electronic Nicotine Delivery Systems.

PubMed

Wagoner, Kimberly G; Cornacchione, Jennifer; Wiseman, Kimberly D; Teal, Randall; Moracco, Kathryn E; Sutfin, Erin L

2016-10-01

Most studies have assessed use of "e-cigarettes" or "electronic cigarettes," potentially excluding new electronic nicotine delivery systems (ENDS), such as e-hookahs and vape pens. Little is known about how adolescents and young adults perceive ENDS and if their perceptions vary by sub-type. We explored ENDS perceptions among these populations. Ten focus groups with 77 adolescents and young adults, ages 13-25, were conducted in spring 2014. Participants were users or susceptible nonusers of novel tobacco products. Focus group transcripts were coded for emergent themes. Participants reported positive ENDS attributes, including flavor variety; user control of nicotine content; and smoke trick facilitation. Negative attributes included different feel compared to combustible cigarettes, nicotine addiction potential, and no cue to stop use. Participants perceived less harm from ENDS compared to combustible cigarettes, perhaps due to marketing and lack of product regulation, but noted the uncertainty of ingredients in ENDS. Numerous terms were used to describe ENDS, including "e-cigarette," "e-hookah," "hookah pens," "tanks," and "vapes." Although no clear classification system emerged, participants used product characteristics like nicotine content and chargeability to attempt classification. Perceptions differed by product used. E-hookah users were perceived as young and trendy while e-cigarette users were perceived as old and addicted to nicotine. Young adults and adolescents report distinct ENDS sub-types with varying characteristics and social perceptions of users. Although they had more positive than negative perceptions of ENDS, prevention efforts should consider highlighting negative attributes as they may discourage use and product trial among young nonusers. Our study underscores the need for a standardized measurement system for ENDS sub-types and additional research on how ENDS sub-types are perceived among adolescents and young adults. In addition, our findings highlight negative product attributes reported by participants that may be useful in prevention and regulatory efforts to offset favorable marketing messages. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

E-cigarettes, Hookah Pens and Vapes: Adolescent and Young Adult Perceptions of Electronic Nicotine Delivery Systems

PubMed Central

Cornacchione, Jennifer; Wiseman, Kimberly D.; Teal, Randall; Moracco, Kathryn E.; Sutfin, Erin L.

2016-01-01

Introduction: Most studies have assessed use of “e-cigarettes” or “electronic cigarettes,” potentially excluding new electronic nicotine delivery systems (ENDS), such as e-hookahs and vape pens. Little is known about how adolescents and young adults perceive ENDS and if their perceptions vary by sub-type. We explored ENDS perceptions among these populations. Methods: Ten focus groups with 77 adolescents and young adults, ages 13–25, were conducted in spring 2014. Participants were users or susceptible nonusers of novel tobacco products. Focus group transcripts were coded for emergent themes. Results: Participants reported positive ENDS attributes, including flavor variety; user control of nicotine content; and smoke trick facilitation. Negative attributes included different feel compared to combustible cigarettes, nicotine addiction potential, and no cue to stop use. Participants perceived less harm from ENDS compared to combustible cigarettes, perhaps due to marketing and lack of product regulation, but noted the uncertainty of ingredients in ENDS. Numerous terms were used to describe ENDS, including “e-cigarette,” “e-hookah,” “hookah pens,” “tanks,” and “vapes.” Although no clear classification system emerged, participants used product characteristics like nicotine content and chargeability to attempt classification. Perceptions differed by product used. E-hookah users were perceived as young and trendy while e-cigarette users were perceived as old and addicted to nicotine. Conclusions: Young adults and adolescents report distinct ENDS sub-types with varying characteristics and social perceptions of users. Although they had more positive than negative perceptions of ENDS, prevention efforts should consider highlighting negative attributes as they may discourage use and product trial among young nonusers. Implications: Our study underscores the need for a standardized measurement system for ENDS sub-types and additional research on how ENDS sub-types are perceived among adolescents and young adults. In addition, our findings highlight negative product attributes reported by participants that may be useful in prevention and regulatory efforts to offset favorable marketing messages. PMID:27029821

High-temperature mass spectrometry - Vaporization of group 4-B metal carbides. [using Knudsen effusion

NASA Technical Reports Server (NTRS)

Stearns, C. A.; Kohl, F. J.

1974-01-01

The high temperature vaporization of the metal-carbon systems TiC, ZrC, HfC, and ThC was studied by the Knudsen effusion - mass spectrometric method. For each system the metal dicarbide and tetracarbide molecular species were identified in the gas phase. Relative ion currents of the carbides and metals were measured as a function of temperature. Second- and third-law methods were used to determine enthalpies. Maximum values were established for the dissociation energies of the metal monocarbide molecules TiC, ZrC, HfC, and ThC. Thermodynamic functions used in the calculations are discussed in terms of assumed molecular structures and electronic contributions to the partition functions. The trends shown by the dissociation energies of the carbides of Group 4B are compared with those of neighboring groups and discussed in relation to the corresponding oxides and chemical bonding. The high temperature molecular beam inlet system and double focusing mass spectrometer are described.

Assessing Dental Hygienists' Communication Techniques for Use with Low Oral Health Literacy Patients.

PubMed

Flynn, Priscilla; Acharya, Amit; Schwei, Kelsey; VanWormer, Jeffrey; Skrzypcak, Kaitlyn

2016-06-01

This primary aim of this study was to assess communication techniques used with low oral health literacy patients by dental hygienists in rural Wisconsin dental clinics. A secondary aim was to determine the utility of the survey instrument used in this study. A mixed methods study consisting of a cross-sectional survey, immediately followed by focus groups, was conducted among dental hygienists in the Marshfield Clinic (Wisconsin) service area. The survey quantified the routine use of 18 communication techniques previously shown to be effective with low oral health literacy patients. Linear regression was used to analyze the association between routine use of each communication technique and several indicator variables, including geographic practice region, oral health literacy familiarity, communication skills training and demographic indicators. Qualitative analyses included code mapping to the 18 communication techniques identified in the survey, and generating new codes based on discussion content. On average, the 38 study participants routinely used 6.3 communication techniques. Dental hygienists who used an oral health literacy assessment tool reported using significantly more communication techniques compared to those who did not use an oral health literacy assessment tool. Focus group results differed from survey responses as few dental hygienists stated familiarity with the term "oral health literacy." Motivational interviewing techniques and using an integrated electronic medical-dental record were additional communication techniques identified as useful with low oral health literacy patients. Dental hygienists in this study routinely used approximately one-third of the communication techniques recommended for low oral health literacy patients supporting the need for training on this topic. Based on focus group results, the survey used in this study warrants modification and psychometric testing prior to further use. Copyright © 2016 The American Dental Hygienists’ Association.

Exploring innovative approaches and patient-centered outcomes from positive outliers in childhood obesity.

PubMed

Sharifi, Mona; Marshall, Gareth; Goldman, Roberta; Rifas-Shiman, Sheryl L; Horan, Christine M; Koziol, Renata; Marshall, Richard; Sequist, Thomas D; Taveras, Elsie M

2014-01-01

New approaches for obesity prevention and management can be gleaned from positive outliers-that is, individuals who have succeeded in changing health behaviors and reducing their body mass index (BMI) in the context of adverse built and social environments. We explored perspectives and strategies of parents of positive outlier children living in high-risk neighborhoods. We collected up to 5 years of height/weight data from the electronic health records of 22,443 Massachusetts children, ages 6 to 12 years, seen for well-child care. We identified children with any history of BMI in the 95th percentile or higher (n = 4007) and generated a BMI z-score slope for each child using a linear mixed effects model. We recruited parents for focus groups from the subsample of children with negative slopes who also lived in zip codes where >15% of children were obese. We analyzed focus group transcripts using an immersion/crystallization approach. We reached thematic saturation after 5 focus groups with 41 parents. Commonly cited outcomes that mattered most to parents and motivated change were child inactivity, above-average clothing sizes, exercise intolerance, and negative peer interactions; few reported BMI as a motivator. Convergent strategies among positive outlier families were family-level changes, parent modeling, consistency, household rules/limits, and creativity in overcoming resistance. Parents voiced preferences for obesity interventions that include tailored education and support that extend outside clinical settings and are delivered by both health care professionals and successful peers. Successful strategies learned from positive outlier families can be generalized and tested to accelerate progress in reducing childhood obesity. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Development and usability testing of a web-based cancer symptom and quality-of-life support intervention.

PubMed

Wolpin, S E; Halpenny, B; Whitman, G; McReynolds, J; Stewart, M; Lober, W B; Berry, D L

2015-03-01

The feasibility and acceptability of computerized screening and patient-reported outcome measures have been demonstrated in the literature. However, patient-centered management of health information entails two challenges: gathering and presenting data using "patient-tailored" methods and supporting "patient-control" of health information. The design and development of many symptom and quality-of-life information systems have not included opportunities for systematically collecting and analyzing user input. As part of a larger clinical trial, the Electronic Self-Report Assessment for Cancer-II project, participatory design approaches were used to build and test new features and interfaces for patient/caregiver users. The research questions centered on patient/caregiver preferences with regard to the following: (a) content, (b) user interface needs, (c) patient-oriented summary, and (d) patient-controlled sharing of information with family, caregivers, and clinicians. Mixed methods were used with an emphasis on qualitative approaches; focus groups and individual usability tests were the primary research methods. Focus group data were content analyzed, while individual usability sessions were assessed with both qualitative and quantitative methods. We identified 12 key patient/caregiver preferences through focus groups with 6 participants. We implemented seven of these preferences during the iterative design process. We deferred development for some of the preferences due to resource constraints. During individual usability testing (n = 8), we were able to identify 65 usability issues ranging from minor user confusion to critical errors that blocked task completion. The participatory development model that we used led to features and design revisions that were patient centered. We are currently evaluating new approaches for the application interface and for future research pathways. We encourage other researchers to adopt user-centered design approaches when building patient-centered technologies. © The Author(s) 2014.

Development of TPF-1 plasma focus for education

NASA Astrophysics Data System (ADS)

Picha, R.; Promping, J.; Channuie, J.; Poolyarat, N.; Sangaroon, S.; Traikool, T.

2017-09-01

The plasma focus is a device that uses high voltage and electromagnetic force to induce plasma generation and acceleration, in order to cause nuclear reactions. Radiation of various types (X-ray, gamma ray, electrons, ions, neutrons) can be generated using this method during the pinch phase, thus making the plasma focus able to serve as a radiation source. Material testing, modification, and identification are among the current applications of the plasma focus. Other than being an alternative option to isotopic sources, the plasma focus, which requires multidisciplinary team of personnel to design, operate, and troubleshoot, can also serve as an excellent learning device for physics and engineering students in the fields including, but not limited to, plasma physics, nuclear physics, electronics engineering, and mechanical engineering. This work describes the parameters and current status of Thai Plasma Focus 1 (TPF-1) and the characteristics of the plasma being produced in the machine using a Rogowski coil.

Three-Dimensional Simulations of Electron Beams Focused by Periodic Permanent Magnets

NASA Technical Reports Server (NTRS)

Kory, Carol L.

1999-01-01

A fully three-dimensional (3D) model of an electron beam focused by a periodic permanent magnet (PPM) stack has been developed. First, the simulation code MAFIA was used to model a PPM stack using the magnetostatic solver. The exact geometry of the magnetic focusing structure was modeled; thus, no approximations were made regarding the off-axis fields. The fields from the static solver were loaded into the 3D particle-in-cell (PIC) solver of MAFIA where fully 3D behavior of the beam was simulated in the magnetic focusing field. The PIC solver computes the time-integration of electromagnetic fields simultaneously with the time integration of the equations of motion of charged particles that move under the influence of those fields. Fields caused by those moving charges are also taken into account; thus, effects like space charge and magnetic forces between particles are fully simulated. The electron beam is simulated by a number of macro-particles. These macro-particles represent a given charge Q amounting to that of several million electrons in order to conserve computational time and memory. Particle motion is unrestricted, so particle trajectories can cross paths and move in three dimensions under the influence of 3D electric and magnetic fields. Correspondingly, there is no limit on the initial current density distribution of the electron beam, nor its density distribution at any time during the simulation. Simulation results including beam current density, percent ripple and percent transmission will be presented, and the effects current, magnetic focusing strength and thermal velocities have on beam behavior will be demonstrated using 3D movies showing the evolution of beam characteristics in time and space. Unlike typical beam optics models, this 3D model allows simulation of asymmetric designs such as non- circularly symmetric electrostatic or magnetic focusing as well as the inclusion of input/output couplers.

Using Focus Groups to Validate a Pharmacy Vaccination Training Program.

PubMed

Bushell, Mary; Morrissey, Hana; Ball, Patrick

2015-06-12

Introduction: Focus group methodology is commonly used to quickly collate, integrated views from a variety of different stakeholders. This paper provides an example of how focus groups can be employed to collate expert opinion informing amendments on a newly developed training program for integration into undergraduate pharmacy curricula. Materials and methods: Four focus groups were conducted, across three continents, to determine the appropriateness and reliability of a developed vaccination training program with nested injection skills training. All focus groups were comprised of legitimate experts in the field of vaccination, medicine and/or pharmacy. Results: Themes that emerged across focus groups informed amendments giving rise to a validated version of a training program. Discussion : The rigorous validation of the vaccination training program offers generalizable lessons to inform the design and validation of future training programs intended for the health sector and or pharmacy curricula. Using the knowledge and experience of focus group participants fostered collaborative problem solving and validation of material and concept development. The group dynamics of a focus group allowed synthesis of feedback in an inter-professional manner. Conclusions : This paper provides a demonstration of how focus groups can be structured and used by health researchers to validate a newly developed training program.

Evaluating Electronic Reference Services: Issues, Approaches and Criteria.

ERIC Educational Resources Information Center

Novotny, Eric

2001-01-01

Discussion of electronic library reference services focuses on an overview of the chief methodologies available for conducting assessments of electronic services. Highlights include quantitative measures and benchmarks, including equity and access; quality measures; behavioral aspects of quality, including librarian-patron interaction; and future…

The electromagnetic ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

NASA Technical Reports Server (NTRS)

Bostick, W. H.; Nardi, V.

1985-01-01

Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield as spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam which is generated simultaneously with the deuteron beam is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev E 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by ser action near the centers of active galaxies.

The electromagnetic Ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

NASA Astrophysics Data System (ADS)

Bostick, W. H.; Nardi, V.

1985-08-01

Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield as spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam which is generated simultaneously with the deuteron beam is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev E 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by ser action near the centers of active galaxies.

Final slate for AGU elections this fall

NASA Astrophysics Data System (ADS)

2012-07-01

Your vote is important! This fall, AGU members will elect leaders for the next term (1 January 2013 to 31 December 2014). This issue of Eos provides details about the upcoming election and information on candidates for open AGU Board and Council positions as well as section and focus group secretary positions. All regular and student members who joined or renewed their membership by 1 July 2012 are eligible to vote in this year's election of AGU leaders. The election will be held electronically, and all members must have a valid e-mail address on file at AGU to receive login credentials from the company conducting the election.

Comparison of a polymeric pseudostationary phase in EKC with ODS stationary phase in RP-HPLC.

PubMed

Ni, Xinjiong; Zhang, Min; Xing, Xiaoping; Cao, Yuhua; Cao, Guangqun

2018-01-01

Poly(stearyl methacrylate-co-methacrylic acid) (P(SMA-co-MAA)) was induced as pseudostationary phase (PSP) in electrokinetic chromatography (EKC). The n-octadecyl groups in SMA were the same as that in octadecylsilane (ODS) C18 column. Thus, the present work focused on the comparison of selectivity between polymeric PSP and ODS stationary phase (SP), and the effect of organic modifiers on the selectivity of polymeric PSP and ODS SP. 1-butanol could directly interacted with PSP as a Class I modifier, and improved both of the methylene selectivity and polar group selectivity. When the analysis times were similar, the polymeric PSP exhibited better methylene selectivity and polar group selectivity. Although the hydrophobic groups were similar, the substituted benzenes elution order was different between polymeric PSP and ODS SP. Linear solvation energy relationships (LSER) model analysis found that polymeric PSP and ODS SP exhibited two same key factors in selectivity: hydrophobic interaction and hydrogen bonding acidity. But polymeric PSP exhibited relatively strong n- and π-electrons interaction to the analytes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Public Participation Guide: Focus Groups

EPA Pesticide Factsheets

A focus group is a small group discussion with professional leadership. Focus groups are used to find out what issues are of most concern for a community or group when little or no information is available.

Different Effect of the Additional Electron-Withdrawing Cyano Group in Different Conjugation Bridge: The Adjusted Molecular Energy Levels and Largely Improved Photovoltaic Performance.

PubMed

Li, Huiyang; Fang, Manman; Hou, Yingqin; Tang, Runli; Yang, Yizhou; Zhong, Cheng; Li, Qianqian; Li, Zhen

2016-05-18

Four organic sensitizers (LI-68-LI-71) bearing various conjugated bridges were designed and synthesized, in which the only difference between LI-68 and LI-69 (or LI-70 and LI-71) was the absence/presence of the CN group as the auxiliary electron acceptor. Interestingly, compared to the reference dye of LI-68, LI-69 bearing the additional CN group exhibited the bad performance with the decreased Jsc and Voc values. However, once one thiophene moiety near the anchor group was replaced by pyrrole with the electron-rich property, the resultant LI-71 exhibited a photoelectric conversion efficiency increase by about 3 folds from 2.75% (LI-69) to 7.95% (LI-71), displaying the synergistic effect of the two moieties (CN and pyrrole). Computational analysis disclosed that pyrrole as the auxiliary electron donor (D') in the conjugated bridge can compensate for the lower negative charge in the electron acceptor, which was caused by the CN group as the electron trap, leading to the more efficient electron injection and better photovoltaic performance.

Device For Trapping Laser Pulses In An Optical Delay Line

DOEpatents

Yu, David U. L.; Bullock, Donald L.

1997-12-23

A device for maintaining a high-energy laser pulse within a recirculating optical delay line for a period time to optimize the interaction of the pulse with an electron beam pulse train comprising closely spaced electron micropulses. The delay line allows a single optical pulse to interact with many of the electron micropulses in a single electron beam macropulse in sequence and for the introduction of additional optical pulses to interact with the micropulses of additional electron beam macropulses. The device comprises a polarization-sensitive beam splitter for admitting an optical pulse to and ejecting it from the delay line according to its polarization state, a Pockels cell to control the polarization of the pulse within the delay line for the purpose of maintaining it within the delay line or ejecting it from the delay line, a pair of focusing mirrors positioned so that a collimated incoming optical pulse is focused by one of them to a focal point where the pulse interacts with the electron beam and then afterwards the pulse is recollimated by the second focusing mirror, and a timing device which synchronizes the introduction of the laser pulse into the optical delay line with the arrival of the electron macropulse at the delay line to ensure the interaction of the laser pulse with a prescribed number of electron micropulses in sequence. In a first embodiment of the invention, the principal optical elements are mounted with their axes collinear. In a second embodiment, all principal optical elements are mounted in the configuration of a ring.

Evaluation of electronic discussion groups as a teaching/learning strategy in an evidence-based medicine course: a pilot study.

PubMed

Kamin, C; Glicken, A; Hall, M; Quarantillo, B; Merenstein, G

2001-01-01

As course directors, we wished to incorporate small group learning into our Evidence-based Medicine course for students to get feedback on the development of a well constructed, researchable clinical question. Scheduling of these groups was problematic. We sought to evaluate computer-mediated communication as an alternative to face-to-face small groups. Students were randomly assigned to either face-to-face small groups or asynchronous, electronic, small groups. Final examination scores were analyzed with an analysis of variance to determine if there were differences in student performance based on group type. Student survey items were analyzed using Fisher's Exact test to determine if there were differences in student attitudes based on group type. There were no significant differences found in overall student performance. Significant differences in student attitudes were found to exist with respect to: (1) participation in discussions, with face-to-face groups reporting greater participation; (2) putting more thought into comments, with electronic groups reporting more thought put into comments; and (3) difficulty relating to other students in the class, with electronic groups reporting more difficulty. We found electronic discussion groups (computer-mediated communication) to be a viable teaching/learning strategy with no adverse effects on student performance or attitudes.

Using Computer Conferencing and Electronic Mail to Facilitate Group Projects.

ERIC Educational Resources Information Center

Anderson, Margaret D.

1996-01-01

Reports on the use of electronic mail and an electronic conferencing system to conduct group projects in three educational psychology courses at the State University of New York College at Cortland. Course design is explained and group project design is described, including assignments and oral presentations during regular class sessions.…

75 FR 38127 - Visteon Systems, LLC North Penn Plant Electronics Products Group Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

..., North Penn Plant, Electronics Products Group to be covered by this certification. The intent of the... North Penn Plant Electronics Products Group Including On-Site Leased Workers From Ryder Integrated... Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment...

Nanofabrication by advanced electron microscopy using intense and focused beam∗.

PubMed

Furuya, Kazuo

2008-01-01

The nanogrowth and nanofabrication of solid substances using an intense and focused electron beam are reviewed in terms of the application of scanning and transmission electron microscopy (SEM, TEM and STEM) to control the size, position and structure of nanomaterials. The first example discussed is the growth of freestanding nanotrees on insulator substrates by TEM. The growth process of the nanotrees was observed in situ and analyzed by high-resolution TEM (HRTEM) and was mainly controlled by the intensity of the electron beam. The second example is position- and size-controlled nanofabrication by STEM using a focused electron beam. The diameters of the nanostructures grown ranged from 4 to 20 nm depending on the size of the electron beam. Magnetic nanostructures were also obtained using an iron-containing precursor gas, Fe(CO) 5 . The freestanding iron nanoantennas were examined by electron holography. The magnetic field was observed to leak from the nanostructure body which appeared to act as a 'nanomagnet'. The third example described is the effect of a vacuum on the size and growth process of fabricated nanodots containing W in an ultrahigh-vacuum field-emission TEM (UHV-FE-TEM). The size of the dots can be controlled by changing the dose of electrons and the partial pressure of the precursor. The smallest particle size obtained was about 1.5 nm in diameter, which is the smallest size reported using this method. Finally, the importance of a smaller probe and a higher electron-beam current with atomic resolution is emphasized and an attempt to develop an ultrahigh-vacuum spherical aberration corrected STEM (Cs-corrected STEM) at NIMS is reported.

Nanofabrication by advanced electron microscopy using intense and focused beam∗

PubMed Central

Furuya, Kazuo

2008-01-01

The nanogrowth and nanofabrication of solid substances using an intense and focused electron beam are reviewed in terms of the application of scanning and transmission electron microscopy (SEM, TEM and STEM) to control the size, position and structure of nanomaterials. The first example discussed is the growth of freestanding nanotrees on insulator substrates by TEM. The growth process of the nanotrees was observed in situ and analyzed by high-resolution TEM (HRTEM) and was mainly controlled by the intensity of the electron beam. The second example is position- and size-controlled nanofabrication by STEM using a focused electron beam. The diameters of the nanostructures grown ranged from 4 to 20 nm depending on the size of the electron beam. Magnetic nanostructures were also obtained using an iron-containing precursor gas, Fe(CO)5. The freestanding iron nanoantennas were examined by electron holography. The magnetic field was observed to leak from the nanostructure body which appeared to act as a ‘nanomagnet’. The third example described is the effect of a vacuum on the size and growth process of fabricated nanodots containing W in an ultrahigh-vacuum field-emission TEM (UHV-FE-TEM). The size of the dots can be controlled by changing the dose of electrons and the partial pressure of the precursor. The smallest particle size obtained was about 1.5 nm in diameter, which is the smallest size reported using this method. Finally, the importance of a smaller probe and a higher electron-beam current with atomic resolution is emphasized and an attempt to develop an ultrahigh-vacuum spherical aberration corrected STEM (Cs-corrected STEM) at NIMS is reported. PMID:27877936

Printed Electronics

NASA Astrophysics Data System (ADS)

Wade, Jessica; Hollis, Joseph Razzell; Wood, Sebastian

2018-04-01

The combination of printing technology with manufacturing electronic devices enables a new paradigm of printable electronics, where 'smart' functionality can be readily incorporated into almost any product at low cost. Over recent decades, rapid progress has been made in this field, which is now emerging into the industrial andcommercial realm. However, successful development and commercialisation on a large scale presents some significant technical challenges. For fully-printable electronic systems, all the component parts must be deposited from solutions (inks), requiring the development of new inorganic, organic and hybrid materials.A variety of traditional printing techniques are being explored and adapted forprinting these new materials in ways that result in the best performing electronicdevices. Whilst printed electronics research has initially focused on traditional typesof electronic device such as light-emitting diodes, transistors, and photovoltaics, it is increasingly apparent that a much wider range of applications can be realised. The soft and stretchable nature of printable materials makes them perfect candidates forbioelectronics, resulting in a wealth of research looking at biocompatible printable inks and biosensors. Regardless of application, the properties of printed electronicmaterials depend on the chemical structures, processing conditions, device architecture,and operational conditions, the complex inter-relationships of which aredriving ongoing research. We focus on three particular 'hot topics', where attention is currently focused: novel materials, characterisation techniques, and device stability. With progress advancing very rapidly, printed electronics is expected to grow over the next decade into a key technology with an enormous economic and social impact.

Study of the Anatomy of the X-Ray and Neutron Production Scaling Laws in the Plasma Focus (Particle Energy Spectrum and Optimization Criteria).

DTIC Science & Technology

1979-11-01

plasma focus operations have been experimentally analyzed in terms of (A) The fine structure of the axial-current channel during maximum of compression. (B) Correlation coefficient, for neutron yield n (by D2 discharges) and the multiplicity of the electron beam pulses; (C) Different values of the electrode voltage. The current distribution near the axial plasma column during the explosive decay of the column has been monitored and correlated with the electron beam production. Plasma focus discharges by our mode of operation generate high-intensity

Collective field accelerator

DOEpatents

Luce, John S.

1978-01-01

A collective field accelerator which operates with a vacuum diode and utilizes a grooved cathode and a dielectric anode that operates with a relativistic electron beam with a .nu./.gamma. of .about. 1, and a plurality of dielectric lenses having an axial magnetic field thereabout to focus the collectively accelerated electrons and ions which are ejected from the anode. The anode and lenses operate as unoptimized r-f cavities which modulate and focus the beam.

Permanent magnet focused X-band photoinjector

DOEpatents

Yu, David U. L.; Rosenzweig, James

2002-09-10

A compact high energy photoelectron injector integrates the photocathode directly into a multicell linear accelerator with no drift space between the injection and the linac. High electron beam brightness is achieved by accelerating a tightly focused electron beam in an integrated, multi-cell, X-band rf linear accelerator (linac). The photoelectron linac employs a Plane-Wave-Transformer (PWT) design which provides strong cell-to-cell coupling, easing manufacturing tolerances and costs.

Preparation and Observation of Thick Biological Samples by Scanning Transmission Electron Tomography.

PubMed

Trépout, Sylvain; Bastin, Philippe; Marco, Sergio

2017-03-12

This report describes a protocol for preparing thick biological specimens for further observation using a scanning transmission electron microscope. It also describes an imaging method for studying the 3D structure of thick biological specimens by scanning transmission electron tomography. The sample preparation protocol is based on conventional methods in which the sample is fixed using chemical agents, treated with a heavy atom salt contrasting agent, dehydrated in a series of ethanol baths, and embedded in resin. The specific imaging conditions for observing thick samples by scanning transmission electron microscopy are then described. Sections of the sample are observed using a through-focus method involving the collection of several images at various focal planes. This enables the recovery of in-focus information at various heights throughout the sample. This particular collection pattern is performed at each tilt angle during tomography data collection. A single image is then generated, merging the in-focus information from all the different focal planes. A classic tilt-series dataset is then generated. The advantage of the method is that the tilt-series alignment and reconstruction can be performed using standard tools. The collection of through-focal images allows the reconstruction of a 3D volume that contains all of the structural details of the sample in focus.

The Impact of Electronic Commerce on the Publishing Industry: Towards a Business Value Complementarity Framework of Electronic Publishing.

ERIC Educational Resources Information Center

Scupola, Ada

1999-01-01

Discussion of the publishing industry and its use of information and communication technologies focuses on the way in which electronic-commerce technologies are changing and could change the publishing processes, and develops a business complementarity model of electronic publishing to maximize profitability and improve the competitive position.…

Exploring practical approaches to maximising data quality in electronic healthcare records in the primary care setting and associated benefits. Report of panel-led discussion held at SAPC in July 2014.

PubMed

Dungey, Sheena; Glew, Simon; Heyes, Barbara; Macleod, John; Tate, A Rosemary

2016-09-01

Electronic healthcare records provide information about patient care over time which not only affords the opportunity to improve patient care directly through effective monitoring and identification of care requirements but also offers a unique platform for both clinical and service-model research essential to the longer-term development of the health service. The quality of the recorded data can, however, be variable and can compromise the validity of data use both for primary and secondary purposes. In order to explore the challenges and benefits of and approaches to recording high quality primary care electronic records, a Clinical Practice Research Datalink (CPRD) sponsored workshop was held at the Society of Academic Primary Care (SAPC) conference in 2014 with the aim of engaging GPs and other data users. The workshop was held as a structured discussion, led by an expert panel and focused around three questions: (1) What are the data quality priorities for clinicians and researchers? How do these priorities differ or overlap? (2) What challenges might GPs face in provision of good data quality both for treating their patients and for research? Do these aims conflict? (3) What tools (such as data metrics and visualisations or software components) could assist the GP in improving data quality and patient management and could this tie in with analytical processes occurring at the research stage? The discussion highlighted both overlap and differences in the perceived data quality priorities and challenges for different user groups. Five key areas of focus were agreed upon and recommendations determined for moving forward in improving quality. The importance of good high quality electronic healthcare records has been set forth along with the need for a practical user-considered and collaborative approach to its improvement.

Activation of a medical emergency team using an electronic medical recording-based screening system*.

PubMed

Huh, Jin Won; Lim, Chae-Man; Koh, Younsuck; Lee, Jury; Jung, Youn-Kyung; Seo, Hyun-Suk; Hong, Sang-Bum

2014-04-01

To evaluate the efficacy of a medical emergency team activated using 24-hour monitoring by electronic medical record-based screening criteria followed by immediate intervention by a skilled team. Retrospective cohort study. Academic tertiary care hospital with approximately 2,700 beds. A total of 3,030 events activated by a medical emergency team from March 1, 2008, to February 28, 2010. None. We collected data for all medical emergency team activations: patient characteristics, trigger type for medical emergency team (electronic medical record-based screening vs calling criteria), interventions during each event, outcomes of the medical emergency team intervention, and 28-day mortality after medical emergency team activation. We analyzed data for 2009, when the medical emergency team functioned 24 hours a day, 7 days a week (period 2), compared with that for 2008, when the medical emergency team functioned 12 hours a day, 7 days a week (period 1). The commonest cause of medical emergency team activation was respiratory distress (43.6%), and the medical emergency team performed early goal-directed therapy (21.3%), respiratory care (19.9%), and difficult airway management (12.3%). For patients on general wards, 51.3% (period 1) and 38.4% (period 2) of medical emergency team activations were triggered by the electronic medical record-based screening system (electronic medical record-triggered group). In 23.4%, activation occurred because of an abnormality in laboratory screening criteria. The commonest activation criterion from electronic medical record-based screening was respiratory rate (39.4%). Over half the patients were treated in the general ward, and one third of the patients were transferred to the ICU. The electronic medical record-triggered group had lower ICU admission with an odds ratio of 0.35 (95% CI, 0.22-0.55). In surgical patients, the electronic medical record-triggered group showed the lower 28-day mortality (10.5%) compared with the call-triggered group (26.7%) or the double-triggered group (33.3%) (odds ratio 0.365 with 95% CI, 0.154-0.867, p = 0.022). We successful managed the medical emergency team with electronic medical record-based screening criteria and a skilled intervention team. The electronic medical record-triggered group had lower ICU admission than the call-triggered group or the double-triggered group. In surgical patients, the electronic medical record-triggered group showed better outcome than other groups.

1st NASA Electronic Parts Packaging (NEPP) Program Electronic Technology Workshop (ETW)

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

NEPP supports all of NASA for >20 years - 7 NASA Centers and JPL actively participate The NEPP Program focuses on the reliability aspects of electronic devices - Three prime technical areas: Parts (die), Packaging, and Radiation Alternately, reliability may be viewed as: -

Electron Beam Focusing in the Linear Accelerator (linac)

NASA Astrophysics Data System (ADS)

Jauregui, Luis

2015-10-01

To produce consistent data with an electron accelerator, it is critical to have a well-focused beam. To keep the beam focused, quadrupoles (quads) are employed. Quads are magnets, which focus the beam in one direction (x or y) and defocus in the other. When two or more quads are used in series, a net focusing effect is achieved in both vertical and horizontal directions. At start up there is a 5% calibration error in the linac at Thomas Jefferson National Accelerator Facility. This means that the momentum of particles passing through the quads isn't always what is expected, which affects the focusing of the beam. The objective is to find exactly how sensitive the focusing in the linac is to this 5% error. A linac was simulated, which contained 290 RF Cavities with random electric fields (to simulate the 5% calibration error), and a total momentum kick of 1090 MeV. National Science Foundation, Department of Energy, Jefferson Lab, Old Dominion University.

Experimental realization of the Ehrenberg-Siday thought experiment

NASA Astrophysics Data System (ADS)

Pozzi, Giulio; Boothroyd, Chris B.; Tavabi, Amir H.; Yücelen, Emrah; Dunin-Borkowski, Rafal E.; Frabboni, Stefano; Gazzadi, Gian Carlo

2016-02-01

In 1949, at the end of a paper dedicated to the concept of the refractive index in electron optics, Ehrenberg and Siday noted that wave-optical effects will arise from an isolated magnetic field even when the rays themselves travel in magnetic-field-free space. They proposed a two-slit experiment, in which a magnetic flux is enclosed between interfering electron beams. Now, through access to modern nanotechnology tools, we used a focused ion beam to open two nanosized slits in a gold-coated silicon nitride membrane and focused electron beam induced deposition to fabricate a thin magnetic bar between the two slits. We then performed Fraunhofer experiments in a transmission electron microscope equipped with a field emission gun and a Lorentz lens. By tilting the specimen in the objective lens field of the electron microscope, the magnetization of the bar could be reversed and the corresponding change in the phase of the electron wave observed directly in the form of a shift in the interference fringe pattern.

Localized conductive patterning via focused electron beam reduction of graphene oxide

NASA Astrophysics Data System (ADS)

Kim, Songkil; Kulkarni, Dhaval D.; Henry, Mathias; Zackowski, Paul; Jang, Seung Soon; Tsukruk, Vladimir V.; Fedorov, Andrei G.

2015-03-01

We report on a method for "direct-write" conductive patterning via reduction of graphene oxide (GO) sheets using focused electron beam induced deposition (FEBID) of carbon. FEBID treatment of the intrinsically dielectric graphene oxide between two metal terminals opens up the conduction channel, thus enabling a unique capability for nanoscale conductive domain patterning in GO. An increase in FEBID electron dose results in a significant increase of the domain electrical conductivity with improving linearity of drain-source current vs. voltage dependence, indicative of a change of graphene oxide electronic properties from insulating to semiconducting. Density functional theory calculations suggest a possible mechanism underlying this experimentally observed phenomenon, as localized reduction of graphene oxide layers via interactions with highly reactive intermediates of electron-beam-assisted dissociation of surface-adsorbed hydrocarbon molecules. These findings establish an unusual route for using FEBID as nanoscale lithography and patterning technique for engineering carbon-based nanomaterials and devices with locally tailored electronic properties.

Clinician preferences for verbal communication compared to EHR documentation in the ICU

PubMed Central

Collins, S.A.; Bakken, S.; Vawdrey, D.K.; Coiera, E.; Currie, L

2011-01-01

Background Effective communication is essential to safe and efficient patient care. Additionally, many health information technology (HIT) developments, innovations, and standards aim to implement processes to improve data quality and integrity of electronic health records (EHR) for the purpose of clinical information exchange and communication. Objective We aimed to understand the current patterns and perceptions of communication of common goals in the ICU using the distributed cognition and clinical communication space theoretical frameworks. Methods We conducted a focus group and 5 interviews with ICU clinicians and observed 59.5 hours of interdisciplinary ICU morning rounds. Results Clinicians used an EHR system, which included electronic documentation and computerized provider order entry (CPOE), and paper artifacts for documentation; yet, preferred the verbal communication space as a method of information exchange because they perceived that the documentation was often not updated or efficient for information retrieval. These perceptions that the EHR is a “shift behind” may lead to a further reliance on verbal information exchange, which is a valuable clinical communication activity, yet, is subject to information loss. Conclusions Electronic documentation tools that, in real time, capture information that is currently verbally communicated may increase the effectiveness of communication. PMID:23616870

Pulsed Laser-Assisted Focused Electron-Beam-Induced Etching of Titanium with XeF 2 : Enhanced Reaction Rate and Precursor Transport

DOE PAGES

Noh, J. H.; Fowlkes, J. D.; Timilsina, R.; ...

2015-01-28

We introduce a laser-assisted focused electron-beam-induced etching (LA-FEBIE) process which is a versatile, direct write nanofabrication method that allows nanoscale patterning and editing; we do this in order to enhance the etch rate of electron-beam-induced etching. The results demonstrate that the titanium electron stimulated etch rate via the XeF2 precursor can be enhanced up to a factor of 6 times with an intermittent pulsed laser assist. Moreover, the evolution of the etching process is correlated to in situ stage current measurements and scanning electron micrographs as a function of time. Finally, the increased etch rate is attributed to photothermally enhancedmore » Ti–F reaction and TiF4 desorption and in some regimes enhanced XeF2 surface diffusion to the reaction zone.« less

QSPR/QSAR in N-[(dimethylamine)methyl] benzamides substituents groups influence upon electronic distribution and local anesthetics activity.

PubMed

Tavares, Leoberto Costa; do Amaral, Antonia Tavares

2004-03-15

It was determined, with a systematic mode, the carbonyl group frequency in the region of the infrared of N-[(dimethylamine)methyl] benzamides 4-substituted (set A) and their hydrochlorides (set B), that had its local anesthetical activity evaluated. The application of the Hammett equation considering the values of the absorption frequency of carbonyl group, nu(C=O,) using the electronic constants sigma, sigma(I), sigma(R), I and R leads to meaningful correlation. The nature and the contribution of substituent group electronic effects on the polarity of the carbonyl group was also analyzed. The use of the nu(C=O) as an experimental electronic parameter for QSPR studies was validated.

Use of text messaging in general practice: a mixed methods investigation on GPs' and patients' views.

PubMed

Leahy, Dorothy; Lyons, Aoife; Dahm, Matthias; Quinlan, Diarmuid; Bradley, Colin

2017-11-01

Text messaging has become more prevalent in general practice as a tool with which to communicate with patients. The main objectives were to assess the extent, growth, and perceived risks and benefits of text messaging by GPs to communicate with patients, and assess patients' attitudes towards receiving text messages from their GP. A mixed methods study, using surveys, a review, and a focus group, was conducted in both urban and rural practices in the south-west of Ireland. A telephone survey of 389 GPs was conducted to ascertain the prevalence of text messaging. Subsequently, the following were also carried out: additional telephone surveys with 25 GPs who use text messaging and 26 GPs who do not, a written satisfaction survey given to 78 patients, a review of the electronic information systems of five practices, and a focus group with six GPs to ascertain attitudes towards text messaging. In total, 38% ( n = 148) of the surveyed GPs used text messaging to communicate with patients and 62% ( n = 241) did not. Time management was identified as the key advantage of text messaging among GPs who used it (80%; n = 20) and those who did not (50%; n = 13). Confidentiality was reported as the principal concern among both groups, at 32% ( n = 8) and 69% ( n = 18) respectively. Most patients (99%; n = 77) were happy to receive text messages from their GP. The GP focus group identified similar issues and benefits in terms of confidentiality and time management. Data were extracted from the IT systems of five consenting practices and the number of text messages sent during the period from January 2013 to March 2016 was generated. This increased by 40% per annum. Collaborative efforts are required from relevant policymakers to address data protection and text messaging issues so that GPs can be provided with clear guidelines to protect patient confidentiality. © British Journal of General Practice 2017.

Looks like smoking, is it smoking?: Children’s perceptions of cigarette-like nicotine delivery systems, smoking and cessation

PubMed Central

2013-01-01

Background Alternative cigarette-like nicotine delivery systems have been met with diverse opinions. One concern has been for the effect on children. We investigate whether children can differentiate tobacco cigarette smoking from use of a nicotine inhaler and electronic cigarette. Their opinions on these devices was also of interest. Methods Two structured focus groups and twelve individual interviews were conducted with twenty Māori and Pacific children (6–10 years old) in low socioeconomic areas in Auckland, New Zealand. Children viewed short video clips on an iPad that demonstrated an actor smoking a tobacco cigarette, sucking a lollipop or using an electronic cigarette or a nicotine inhaler. Results Children did not recognise the inhaler or electronic cigarette. Some children did however notice anomalies in the ‘smoking’ behaviour. Once told about the products the children were mostly positive about the potential of the inhaler and electronic cigarette to assist smokers to quit. Negative perceptions were expressed, including views about the ill health effects associated with continued nicotine intake and the smoker’s inability to quit. Conclusions In a context unfamiliar with electronic cigarettes or nicotine inhalers, such as New Zealand, children may misperceive use of these products as smoking. Once these products are more common and the purpose of them is known, seeing people use them should normalise quitting behaviour, something the children were very supportive of. PMID:24238406

Focused ion beam (FIB)/scanning electron microscopy (SEM) in tissue structural research.

PubMed

Leser, Vladka; Milani, Marziale; Tatti, Francesco; Tkalec, Ziva Pipan; Strus, Jasna; Drobne, Damjana

2010-10-01

The focused ion beam (FIB) and scanning electron microscope (SEM) are commonly used in material sciences for imaging and analysis of materials. Over the last decade, the combined FIB/SEM system has proven to be also applicable in the life sciences. We have examined the potential of the focused ion beam/scanning electron microscope system for the investigation of biological tissues of the model organism Porcellio scaber (Crustacea: Isopoda). Tissue from digestive glands was prepared as for conventional SEM or as for transmission electron microscopy (TEM). The samples were transferred into FIB/SEM for FIB milling and an imaging operation. FIB-milled regions were secondary electron imaged, back-scattered electron imaged, or energy dispersive X-ray (EDX) analyzed. Our results demonstrated that FIB/SEM enables simultaneous investigation of sample gross morphology, cell surface characteristics, and subsurface structures. The same FIB-exposed regions were analyzed by EDX to provide basic compositional data. When samples were prepared as for TEM, the information obtained with FIB/SEM is comparable, though at limited magnification, to that obtained from TEM. A combination of imaging, micro-manipulation, and compositional analysis appears of particular interest in the investigation of epithelial tissues, which are subjected to various endogenous and exogenous conditions affecting their structure and function. The FIB/SEM is a promising tool for an overall examination of epithelial tissue under normal, stressed, or pathological conditions.

Ion Beam And Plasma Jet Generated By A 3 kJ Plasma Focus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, L. K.; Ngoi, S. K.; Yap, S. L.

The plasma focus device is well known as a copious source of X-ray, neutrons, ion and electron beams. In this work, the characteristics of energetic ion beam emission in a 3 kJ Mather-type plasma focus is studied. The plasma focus system is operated at low pressure with argon as the working gas. The objective of the project is to obtain the argon ion beam and the plasma jet. The ion beam and plasma jet are used for material processing. In order to investigate the effect of the ion beam and plasma jet, crystalline silicon substrates are placed above the anode.more » Samples obtained after irradiation with the plasma focus discharge are analyzed by using the Scanning electron microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDX).« less

A randomized controlled trial of an electronic informed consent process.

PubMed

Rothwell, Erin; Wong, Bob; Rose, Nancy C; Anderson, Rebecca; Fedor, Beth; Stark, Louisa A; Botkin, Jeffrey R

2014-12-01

A pilot study assessed an electronic informed consent model within a randomized controlled trial (RCT). Participants who were recruited for the parent RCT project were randomly selected and randomized to either an electronic consent group (n = 32) or a simplified paper-based consent group (n = 30). Results from the electronic consent group reported significantly higher understanding of the purpose of the study, alternatives to participation, and who to contact if they had questions or concerns about the study. However, participants in the paper-based control group reported higher mean scores on some survey items. This research suggests that an electronic informed consent presentation may improve participant understanding for some aspects of a research study. © The Author(s) 2014.

Effects of a sexual health care nursing record on the attitudes and practice of oncology nurses.

PubMed

Jung, Dukyoo; Kim, Jung-Hee

2016-10-01

A nursing record focused on sexual health care for patients with cancer could encourage oncology nurses to provide sexual health care for oncology patients in a simple and effective manner. However, existing electronic information systems focus on professional use and not sexual health care, which could lead to inefficiencies in clinical practice. To examine the effects of a sexual health care nursing record on the attitudes and practice of oncology nurses. Twenty-four full-time registered nurses caring for oncology patients were randomly assigned to the intervention and control groups in Korea. The researchers developed a sexual health care record and applied it to the intervention group for one month. Data were analyzed by Mann-Whitney U test and chi-square test. Content analysis was used to analyze interviews. Oncology nurses using the sexual health care record had significantly higher levels of sexual health care practice at 4 weeks post-intervention as compared to those who provided usual care to patients with cancer. A sexual health care record may have the potential to facilitate oncology nurses' practice of sexual health care. This study highlighted the importance of using SHC records with oncology patients to improve nursing practice related to sexuality issues. A nursing record focused on SHC for patients with cancer could make it easier and more effective for oncology nurses to provide such care to their patients. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of nonlinear absorption on self focusing of short laser pulse in a plasma

NASA Astrophysics Data System (ADS)

Kumar, Ashok

2012-06-01

Paraxial theory of self focusing of short pulse laser in a plasma under transient and saturating effects of nonlinearity and nonlinear absorption is developed. The absorption is averaged over the cross-section of the beam and is different for different time segments of the pulse. The electron temperature includes cumulative effect of previous history of temporal profile of pulse intensity, however, the ambipolar diffusion is taken to be faster than the heating time. The relaxation effect causes self-distortion of the pulse temporal profile where as the nonlinear absorption weakens self focusing. For the pulses of duration comparable to the electron ion collision time, the front part of the pulse gets defocused where as the latter part undergoes periodic self focusing.

Advanced electron microscopy characterization of tri-layer rare-earth oxide superlattices

NASA Astrophysics Data System (ADS)

Phillips, Patrick; Disa, Ankit; Ismail-Beigi, Sohrab; Klie, Robert; University of Illinois-Chicago Team; Yale University Team

2015-03-01

Rare-earth nickelates are known to display complex electronic and magnetic behaviors owed to a very localized and sensitive Ni-site atomic and electronic structure. Toward realizing the goal of manipulating of the energetic ordering of Ni d orbitals and 2D conduction, the present work focuses on the experimental characterization of thin film superlattice structures consisting of alternating layers of LaTiO3 and LaNiO3 sandwiched between a dull insulator, LaAlO3. Using advanced scanning transmission electron microscopy (STEM)-based methods, properties such as interfacial sharpness, electron transfer, O presence, and local electronic structure can be probed at the atomic scale, and will be discussed at length. By combining both energy dispersive X-ray (EDX) and electronic energy loss (EEL) spectroscopies in an aberration-corrected STEM, it is possible to attain energy and spatial resolutions of 0.35 eV and 100 pm, respectively. Focus of the talk will remain not only on the aforementioned properties, but will also include details and parameters of the acquisitions to facilitate future characterization at this level.

The effect of functional groups on reduction and activation of quinone bioreductive agents by DT-diaphorase.

PubMed

Fourie, Jeanne; Oleschuk, Curtis J; Guziec, Frank; Guziec, Lynn; Fiterman, Derek J; Monterrosa, Cielo; Begleiter, Asher

2002-02-01

Bioreductive antitumor agents are an important class of anticancer drugs that include the clinically used drug, mitomycin C, and new agents such as EO9 and tirapazamine that have recently been tested in clinical trials. These agents require activation by reductive enzymes such as DT-diaphorase or NADPH:cytochrome P450 reductase. A major focus for improving cancer chemotherapy has been to increase the selectivity and targeting of antitumor drugs to tumor cells. Bioreductive antitumor agents are ideally suited to improving tumor selectivity by an enzyme-directed approach to tumor targeting. However, none of the bioreductive agents developed to date has been specific for activation by a single reductive enzyme. This is in part due to a lack of knowledge about structural factors that confer selectivity for activation by reductive enzymes. The purpose of this study was to investigate the ability of specific functional groups to modify reduction and activation of quinone bioreductive agents by DT-diaphorase. We used a series of model benzoquinone mustard (BM) bioreductive agents and compared the parent compound BM to MBM, which has a strong electron-donating methoxy group, MeBM, which has a weaker electron-donating methyl group, CBM, which has an electron-withdrawing chloro group, and PBM and its structural isomer, meta-PBM (m-PBM), which both have sterically bulky benzene rings attached to the quinone moiety. We determined the rate of reduction of these agents by purified human DT-diaphorase under hypoxic and aerobic conditions. We also measured the cytotoxic activity of these agents in human tumor cell lines with and without the DT-diaphorase inhibitor, dicoumarol. Under hypoxic conditions in vitro, the t(1/2) values for reduction of the analogs by purified DT-diaphorase were 4, 6, 8, 9, 10 and 21 min for BM, MeBM, CBM, MBM, PBM and m-PBM, respectively. Under aerobic conditions the rank order of redox cycling after two-electron reduction by DT-diaphorase was MBM > MeBM > BM approximately CBM approximately PBM approximately m-PBM. The rate of reduction by DT-diaphorase of HBM, a non-alkylating analog of BM, was similar to that of BM under hypoxic conditions, and the rate of redox cycling under aerobic conditions was comparable to that of BM, suggesting that structural changes to the cytotoxic group of these BMs do not affect DT-diaphorase-mediated reduction and redox cycling potential. MBM, MeBM and PBM were more toxic than BM in the NCI-H661 human non-small-cell lung cancer cells and SK-MEL-28 human melanoma cells, while CBM displayed significantly increased cytotoxic activity compared to BM only in the NCI H661 cells. m-PBM had similar cytotoxic activity compared with BM in both cell lines. These cell lines have moderate to high levels of DT-diaphorase activity. When cells were pretreated with the DT-diaphorase inhibitor, dicoumarol, the cytotoxic activity of BM increased while that of MBM decreased in both cell lines, suggesting that BM was inactivated by DT-diaphorase while MBM was activated by this enzyme. Pretreatment of the SK-MEL-28 melanoma cells with dicoumarol resulted in an increased cytotoxic activity of MeBM, but pretreatment of the NCI-H661 cells did not affect the cytotoxicity of MeBM. This suggests, that similar to the results with BM, DT-diaphorase is an inactivating enzyme for MeBM in the SK-MEL-28 cell line. Dicoumarol had no significant effect on the cytotoxicity of CBM, PBM or m-PBM in both cell lines. These studies demonstrated that functional groups can significantly affect the reduction and activation of bioreductive agents by DT-diaphorase. All the functional groups decreased the rate of reduction of the quinone group by DT-diaphorase. Since MeBM and MBM, with electron-donating functional groups, and CBM with an electron-withdrawing functional group had similar half-lives of reduction by DT-diaphorase, steric rather than electronic effects of the functional groups appear to be more important for modifying the rate of reduction by DT-diaphorase. Steric effects on reduction by DT-diaphorase were also influenced by the position of the functional group on the quinone ring moiety, as the reduction of m-PBM was much slower than the reduction of PBM. The electron-donating methoxy and methyl functional groups increased the ability of the reduced products of MBM and MeBM to undergo redox cycling. DT-diaphorase appeared to be an activating enzyme for MBM. This may have resulted in part from increased formation of reactive oxygen species resulting from the increased redox cycling by MBM. In contrast, DT-diaphorase was an inactivating enzyme for BM, and for MeBM in the SK-MEL-28 melanoma cells, possibly because the hydroquinone product of BM and MeBM may be less cytotoxic than the semiquinone produced by one-electron reduction by NADPH:cytochrome P450 reductase.

Task-specific usability requirements of electronic medical records systems: Lessons learned from a national survey of end-users.

PubMed

Farzandipour, Mehrdad; Meidani, Zahra; Riazi, Hossein; Sadeqi Jabali, Monireh

2018-09-01

There are various approaches to evaluating the usability of electronic medical record (EMR) systems. User perspectives are an integral part of evaluation. Usability evaluations efficiently and effectively contribute to user-centered design and supports tasks and increase user satisfaction. This study determined the main usability requirements for EMRs by means of an end-user survey. A mixed-method strategy was conducted in three phases. A qualitative approach was employed to collect and formulate EMR usability requirements using the focus group method and the modified Delphi technique. Classic Delphi technique was used to evaluate the proposed requirements among 380 end-users in Iran. The final list of EMR usability requirements was verified and included 163 requirements divided into nine groups. The highest rates of end-user agreement relate to EMR visual clarity (3.65 ± 0.61), fault tolerance (3.58 ± 0.56), and suitability for learning (3.55 ± 0.54). The lowest end-user agreement was for auditory presentation (3.18 ± 0.69). The highest and lowest agreement among end-users was for visual clarity and auditory presentation by EMRs, respectively. This suggests that user priorities in determination of EMR usability and their understanding of the importance of the types of individual tasks and context characteristics differ.

Novel Halogenated Pyrazine-Based Chalcones as Potential Antimicrobial Drugs.

PubMed

Kucerova-Chlupacova, Marta; Vyskovska-Tyllova, Veronika; Richterova-Finkova, Lenka; Kunes, Jiri; Buchta, Vladimir; Vejsova, Marcela; Paterova, Pavla; Semelkova, Lucia; Jandourek, Ondrej; Opletalova, Veronika

2016-10-27

Chalcones, i.e., compounds with the chemical pattern of 1,3-diphenylprop-2-en-1-ones, exert a wide range of bio-activities, e.g., antioxidant, anti-inflammatory, anticancer, anti-infective etc. Our research group has been focused on pyrazine analogues of chalcones; several series have been synthesized and tested in vitro on antifungal and antimycobacterial activity. The highest potency was exhibited by derivatives with electron withdrawing groups (EWG) in positions 2 and 4 of the ring B. As halogens also have electron withdrawing properties, novel halogenated derivatives were prepared by Claisen-Schmidt condensation. All compounds were submitted for evaluation of their antifungal and antibacterial activity, including their antimycobacterial effect. In the antifungal assay against eight strains of selected fungi, growth inhibition of Candida glabrata and Trichophyton interdigitale (formerly T. mentagrophytes ) was shown by non-alkylated derivatives with 2-bromo or 2-chloro substitution. In the panel of selected bacteria, 2-chloro derivatives showed the highest inhibitory effect on Staphylococcus sp. In addition, all products were also screened for their antimycobacterial activity against Mycobacterium tuberculosis H37RV My 331/88, M. kansasii My 235/80, M. avium 152/80 and M. smegmatis CCM 4622. Some of the examined compounds, inhibited growth of M. kansasii and M. smegmatis with minimum inhibitory concentrations (MICs) comparable with those of isoniazid.

Integrating tobacco dependence counseling into electronic dental records: a multi-method approach.

PubMed

Rush, William A; Schleyer, Titus K L; Kirshner, Michael; Boyle, Raymond; Thoele, Merry Jo; Lenton, P A; Asche, Steve; Thyvalikakath, Thankam; Spallek, Heiko; Durand, Emily C; Enstad, Chris J; Huntley, Charles L; Rindal, D Brad

2014-01-01

Dentistry has historically seen tobacco dependence as a medical problem. As a consequence, dentistry has not adopted or developed effective interventions to deal with tobacco dependence. With the expanded use of electronic dental records, the authors identified an opportunity to incorporate standardized expert support for tobacco dependence counseling during the dental visit. Using qualitative results from observations and focus groups, a decision support system was designed that suggested discussion topics based on the patient's desire to quit and his or her level of nicotine addiction. Because dental providers are always pressed for time, the goal was a three-minute average intervention interval. To fulfill the provider's need for an easy way to track ongoing interventions, script usage was recorded. This process helped the provider track what he or she had said to the patient about tobacco dependence during previous encounters and to vary the messages. While the individual elements of the design process were not new, the combination of them proved to be very effective in designing a usable and accepted intervention. The heavy involvement of stakeholders in all components of the design gave providers and administrators ownership of the final product, which was ultimately adopted for use in all the clinics of a large dental group practice in Minnesota.

Attracted to power: challenge/threat and promotion/prevention focus differentially predict the attractiveness of group power

PubMed Central

Scholl, Annika; Sassenrath, Claudia; Sassenberg, Kai

2015-01-01

Depending on their motivation, individuals prefer different group contexts for social interactions. The present research sought to provide more insight into this relationship. More specifically, we tested how challenge/threat and a promotion/prevention focus predict attraction to groups with high- or low-power. As such, we examined differential outcomes of threat and prevention focus as well as challenge and promotion focus that have often been regarded as closely related. According to regulatory focus, individuals should prefer groups that they expect to “feel right” for them to join: Low-power groups should be more attractive in a prevention (than a promotion) focus, as these groups suggest security-oriented strategies, which fit a prevention focus. High-power groups should be more attractive in a promotion (rather than a prevention) focus, as these groups are associated with promotion strategies fitting a promotion focus (Sassenberg et al., 2007). In contrast, under threat (vs. challenge), groups that allow individuals to restore their (perceived) lack of control should be preferred: Low-power groups should be less attractive under threat (than challenge) because they provide low resources which threatened individuals already perceive as insufficient and high-power groups might be more attractive under threat (than under challenge), because their high resources allow individuals to restore control. Two experiments (N = 140) supported these predictions. The attractiveness of a group often depends on the motivation to engage in what fits (i.e., prefer a group that feels right in the light of one’s regulatory focus). However, under threat the striving to restore control (i.e., prefer a group allowing them to change the status quo under threat vs. challenge) overrides the fit effect, which may in turn guide individuals’ behavior in social interactions. PMID:25904887

Magnetic lens apparatus for use in high-resolution scanning electron microscopes and lithographic processes

DOEpatents

Crewe, Albert V.

2000-01-01

Disclosed are lens apparatus in which a beam of charged particlesis brought to a focus by means of a magnetic field, the lens being situated behind the target position. In illustrative embodiments, a lens apparatus is employed in a scanning electron microscopeas the sole lens for high-resolution focusing of an electron beam, and in particular, an electron beam having an accelerating voltage of from about 10 to about 30,000 V. In one embodiment, the lens apparatus comprises an electrically-conducting coil arranged around the axis of the beam and a magnetic pole piece extending along the axis of the beam at least within the space surrounded by the coil. In other embodiments, the lens apparatus comprises a magnetic dipole or virtual magnetic monopole fabricated from a variety of materials, including permanent magnets, superconducting coils, and magnetizable spheres and needles contained within an energy-conducting coil. Multiple-array lens apparatus are also disclosed for simultaneous and/or consecutive imaging of multiple images on single or multiple specimens. The invention further provides apparatus, methods, and devices useful in focusing charged particle beams for lithographic processes.

Usefulness of Crossword Puzzles in Helping First-Year BVSc Students Learn Veterinary Terminology.

PubMed

Abuelo, Angel; Castillo, Cristina; May, Stephen A

Appropriate terminology is essential for successful communication among health professionals. However, students have traditionally been encouraged to learn terminology by rote memorization and recall, strategies that students try to avoid. The use of crossword puzzles as a learning tool has been evaluated in other education disciplines, but not for terminology related to veterinary science. Hence, the objective of this study was to test whether crossword puzzles might be an effective aid to learning veterinary terminology. Forty-two first-year students enrolled in a Bachelor of Veterinary Science program were randomly divided into two groups and their previous knowledge of veterinary terms tested. One group received a list of 30 terms with their definitions. The other group received the same list plus six specially designed puzzles incorporating these 30 terms. After 50 minutes, both groups completed a post-intervention test and the results were compared statistically. The results showed that the students using the crossword puzzles performed better in the post-intervention test, correctly retaining more terms than the students using only rote learning. In addition, qualitative data, gathered through an electronic survey and focus group discussions, revealed a positive attitude among students toward the use of crossword puzzles.

Graphical Representations of Electronic Search Patterns.

ERIC Educational Resources Information Center

Lin, Xia; And Others

1991-01-01

Discussion of search behavior in electronic environments focuses on the development of GRIP (Graphic Representor of Interaction Patterns), a graphing tool based on HyperCard that produces graphic representations of search patterns. Search state spaces are explained, and forms of data available from electronic searches are described. (34…

Executives "Plug in" to Electronic Commerce

ERIC Educational Resources Information Center

Education & Training, 2002

2002-01-01

Describes a programme, developed by FT Knowledge and the Wharton School of the University of Pennsylvania, USA, to guide managers through the opportunities and threats presented by electronic commerce. Focuses on areas such as marketing, electronic retailing, pricing, product design, supply chain management and communication. Highlights how the…

Klystron-linac combination

DOEpatents

Stein, W.E.

1980-04-24

A combination klystron-linear accelerator which utilizes anti-bunch electrons generated in the klystron section as a source of electrons to be accelerated in the accelerator section. Electron beam current is controlled by second harmonic bunching, constrictor aperture size and magnetic focusing. Rf coupling is achieved by internal and external coupling.

Trust and Relationship Building in Electronic Commerce.

ERIC Educational Resources Information Center

Papadopoulou, Panagiota; Andreou, Andreas; Kanellis, Panagiotis; Martakos, Drakoulis

2001-01-01

Discussion of the need for trust in electronic commerce to build customer relationships focuses on a model drawn from established theoretical work on trust and relationship marketing that highlights differences between traditional and electronic commerce. Considers how trust can be built into virtual environments. (Contains 50 references.)…

Designing Electronic Books.

ERIC Educational Resources Information Center

Barker, Philip; Manji, Karim

1991-01-01

Discussion of the design of interactive environments focuses on three types of electronic book metaphors that use optical discs and can facilitate computer-based learning: (1) static picture books, (2) moving picture books, and (3) multimedia books. Guidelines for designing electronic books are presented, and future directions are discussed. (17…

Tuning of electronic properties and dynamical stability of graphene oxide with different functional groups

NASA Astrophysics Data System (ADS)

Dabhi, Shweta D.; Jha, Prafulla K.

2017-09-01

The structural, electronic and vibrational properties of graphene oxide (GO) with varying proportion of epoxy and hydroxyl functional groups have been studied using density functional theory. The functional groups and oxygen density have an obvious influence on the electronic and vibrational properties. The dependence of band gap on associated functional groups and oxygen density shows a possibility of tuning the band gap of graphene by varying the functional groups as well as oxidation level. The absorption of high oxygen content in graphene leads to the gap opening and resulting in a transition from semimetal to semiconductor. Phonon dispersion curves show no imaginary frequency or no softening of any phonon mode throughout the Brillouin zone which confirms the dynamical stability of all considered GO models. Different groups and different oxygen density result into the varying characteristics of phonon modes. The computed results show good agreement with the experimental observations. Our results present interesting possibilities for engineering the electronic properties of graphene and GO and impact the fabrication of new electronics.

Universal main magnetic focus ion source for production of highly charged ions

NASA Astrophysics Data System (ADS)

Ovsyannikov, V. P.; Nefiodov, A. V.; Levin, A. A.

2017-10-01

A novel room-temperature compact ion source has been developed for the efficient production of atomic ions by means of an electron beam with energy Ee and current density je controllable within wide ranges (100 eV ≲Ee ≲ 60 keV, 10 A/cm2 ≲je ≲ 20 kA/cm2). In the first experiments, the X-ray emission of Ir64+ ions has been measured. Based on a combination of two different techniques, the device can operate both as conventional Electron Beam Ion Source/Trap and novel Main Magnetic Focus Ion Source. The tunable electron-optical system allows for realizing laminar and turbulent electron flows in a single experimental setup. The device is intended primarily for fundamental and applied research at standard university laboratories.

Power Electronics Thermal Management R&D (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waye, S.

2014-11-01

This project will investigate and develop thermal-management strategies for wide bandgap (WBG)-based power electronics systems. Research will be carried out to deal with thermal aspects at the module- and system-level. Module-level research will focus on die- and substrate-integrated cooling strategies and heat-transfer enhancement technologies. System-level research will focus on thermal-management strategies for the entire power electronics system to enable smart packaging solutions. One challenge with WBG device-based power electronics is that although losses in the form of heat may be lower, the footprint of the components is also likely to be reduced to reduce cost, weight, and volume. Combined withmore » higher operational temperatures, this creates higher heat fluxes which much be removed from a smaller footprint, requiring advanced cooling strategies.« less

Fundamental edge broadening effects during focused electron beam induced nanosynthesis

DOE PAGES

Schmied, Roland; Fowlkes, Jason Davidson; Winkler, Robert; ...

2015-02-16

In this study, we explore lateral broadening effects of 3D structures fabricated through focused electron beam induced deposition using MeCpPt(IV)Me 3 precursor. In particular, the scaling behavior of proximity effects as a function of the primary electron energy and the deposit height is investigated through experiments and validated through simulations. Correlated Kelvin force microscopy and conductive atomic force microscopy measurements identified conductive and non-conductive proximity regions. It was determined that the highest primary electron energies enable the highest edge sharpness while lower energies contain a complex convolution of broadening effects. In addition, it is demonstrated that intermediate energies lead tomore » even more complex proximity effects that significantly reduce lateral edge sharpness and thus should be avoided if desiring high lateral resolution.« less

X-Ray Spectroscopies of Warm Dense Matter

NASA Astrophysics Data System (ADS)

Hoidn, Oliver

This dissertation provides a perspective on the role of x-ray spectroscopy and diffraction diagnostics in experimental studies of warm dense matter (WDM). The primary focus of the work I discuss is the development of techniques to measure the structure and state variables of laboratory-generated WDM with a view towards both phenomenlogy and placing contraints on theoretical models. I present techniques adapted to two experimental venues for WDM studies: large-scale laser plasma facilities and x-ray free electron lasers. My focus is on the latter, in the context of which I have studied a dose enhancement technique that exploits nonlocal heat transport in nanostructured targets and considered several aspects of optimizing x-ray diffraction measurements. This work came into play in beam runs at the Linac Coherent Light Source (LCLS) in which my group performed x-ray diffraction studies of several materials heated to eV-scale temperatures. The results from these experiments include confirmation of the persistence of long-range crystalline order upon heating of metal oxides to tens of eV temperarures on the 40 fs timescale. One material, MgO, additionally manifested a surprising anomalous early onset in delocalization of valence charge density, contradicting predictions of all models based on either ground state electronic structure or (high-energy density) plasma physics. This particular result outlines a future path for studies of ordered insulators heated to temperatures on the order of the band gap. Such experiments will offer strong tests of electronic strucure theory, implementing a scientific approach that sees measurement of real-space charge density via x-ray diffraction (XRD) as a particularly effectve means to constrain density functional theory (DFT)-based modeling of the solid state/plasma transitional regime.

A Review of Pulmonary Toxicity of Electronic Cigarettes in the Context of Smoking: A Focus on Inflammation.

PubMed

Shields, Peter G; Berman, Micah; Brasky, Theodore M; Freudenheim, Jo L; Mathe, Ewy; McElroy, Joseph P; Song, Min-Ae; Wewers, Mark D

2017-08-01

The use of electronic cigarettes (e-cigs) is increasing rapidly, but their effects on lung toxicity are largely unknown. Smoking is a well-established cause of lung cancer and respiratory disease, in part through inflammation. It is plausible that e-cig use might affect similar inflammatory pathways. E-cigs are used by some smokers as an aid for quitting or smoking reduction, and by never smokers (e.g., adolescents and young adults). The relative effects for impacting disease risk may differ for these groups. Cell culture and experimental animal data indicate that e-cigs have the potential for inducing inflammation, albeit much less than smoking. Human studies show that e-cig use in smokers is associated with substantial reductions in blood or urinary biomarkers of tobacco toxicants when completely switching and somewhat for dual use. However, the extent to which these biomarkers are surrogates for potential lung toxicity remains unclear. The FDA now has regulatory authority over e-cigs and can regulate product and e-liquid design features, such as nicotine content and delivery, voltage, e-liquid formulations, and flavors. All of these factors may impact pulmonary toxicity. This review summarizes current data on pulmonary inflammation related to both smoking and e-cig use, with a focus on human lung biomarkers. Cancer Epidemiol Biomarkers Prev; 26(8); 1175-91. ©2017 AACR . ©2017 American Association for Cancer Research.

Development of a Core Set of Outcome Measures for Large-vessel Vasculitis: Report from OMERACT 2016.

PubMed

Sreih, Antoine G; Alibaz-Oner, Fatma; Kermani, Tanaz A; Aydin, Sibel Z; Cronholm, Peter F; Davis, Trocon; Easley, Ebony; Gul, Ahmet; Mahr, Alfred; McAlear, Carol A; Milman, Nataliya; Robson, Joanna C; Tomasson, Gunnar; Direskeneli, Haner; Merkel, Peter A

2017-12-01

Among the challenges in conducting clinical trials in large-vessel vasculitis (LVV), including both giant cell arteritis (GCA) and Takayasu arteritis (TA), is the lack of standardized and meaningful outcome measures. The Outcome Measures in Rheumatology (OMERACT) Vasculitis Working Group initiated an international effort to develop and validate data-driven outcome tools for clinical investigation in LVV. An international Delphi exercise was completed to gather opinions from clinical experts on LVV-related domains considered important to measure in trials. Patient interviews and focus groups were completed to identify outcomes of importance to patients. The results of these activities were presented and discussed in a "Virtual Special Interest Group" using telephone- and Internet-based conferences, discussions through electronic mail, and an in-person session at the 2016 OMERACT meeting. A preliminary core set of domains common for all forms of LVV with disease-specific elements was proposed. The majority of experts agree with using common outcome measures for GCA and TA, with the option of supplementation with disease-specific items. Following interviews and focus groups, pain, fatigue, and emotional effect emerged as health-related quality of life domains important to patients. Current disease assessment tools, including the Birmingham Vasculitis Activity Score, were found to be inadequate to assess disease activity in GCA and standardized assessment of imaging tests were felt crucial to study LVV, especially TA. Initial data from a clinician Delphi exercise and structured patient interviews have provided themes toward an OMERACT-endorsed core set of domains and outcome measures.

Note: Characteristic beam parameter for the line electron gun

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iqbal, M.; Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049; Islam, G. U.

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm{sup 2} at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm{sup 2}), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

Note: Characteristic beam parameter for the line electron gun.

PubMed

Iqbal, M; Islam, G U; Zhou, Z; Chi, Y

2013-11-01

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm(2) at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm(2)), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

Note: Characteristic beam parameter for the line electron gun

NASA Astrophysics Data System (ADS)

Iqbal, M.; Islam, G. U.; Zhou, Z.; Chi, Y.

2013-11-01

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm2 at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm2), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

Electron effects in the Neutralized Transport Experiment (NTX)

NASA Astrophysics Data System (ADS)

Eylon, S.; Henestroza, E.; Roy, P. K.; Yu, S. S.

2005-05-01

The Neutralized Transport Experiment (NTX) at the Heavy Ion Fusion Virtual National Laboratory is exploring the performance of neutralized final focus systems for high-perveance heavy ion beams. To focus a high-intensity beam to a small spot requires a high-brightness beam. In the NTX experiment, a potassium ion beam of up to 400 keV and 80 mA is generated in a Pierce-type diode. At the diode exit, an aperture with variable opening provides the capability to vary the beam perveance. The beam is transported through four quadrupole magnets to a distance of 2.5 m. The beam can be neutralized and focused using a MEVVA plasma plug and a RF plasma source. We shall report on the measurement of the electron effects and the ways to mitigate the effects. Furthermore, we shall present the results of EGUN calculations consistent with the measurements effects of the electrons.

Micromachined mold-type double-gated metal field emitters

NASA Astrophysics Data System (ADS)

Lee, Yongjae; Kang, Seokho; Chun, Kukjin

1997-12-01

Electron field emitters with double gates were fabricated using micromachining technology and the effect of the electric potential of the focusing gate (or second gate) was experimentally evaluated. The molybdenum field emission tip was made by filling a cusplike mold formed when a conformal film was deposited on the hole-trench that had been patterned on stacked metals and dielectric layers. The hole-trench was patterned by electron beam lithography and reactive ion etching. Each field emitter has a 0960-1317/7/4/009/img1 diameter extraction gate (or first gate) and a 0960-1317/7/4/009/img2 diameter focusing gate (or second gate). To make a path for the emitted electrons, silicon bulk was etched anisotropically in KOH and EDP (ethylene-diamine pyrocatechol) solution successively. The I - V characteristics and anode current change due to the focusing gate potential were measured.