40 CFR Table I-2 to Subpart I of... - Examples of Fluorinated GHGs and Fluorinated Heat Transfer Fluids Used by the Electronics Industry

Code of Federal Regulations, 2013 CFR

2013-07-01

... Fluorinated Heat Transfer Fluids Used by the Electronics Industry I Table I-2 to Subpart I of Part 98... GREENHOUSE GAS REPORTING Electronics Manufacturing Pt. 98, Subpt. I, Table I-2 Table I-2 to Subpart I of Part 98—Examples of Fluorinated GHGs and Fluorinated Heat Transfer Fluids Used by the Electronics Industry...

China Report: Political, Sociological and Military Affairs.

DTIC Science & Technology

1985-07-31

his party at the Jingjiang hotel yesterday. Comrade Jiang Zemin, deputy chief of the State Council’s leading group for invigorating the electronics... industry and former minister of electronics industry , attended the meeting and banquet. The delegation of the GDR Ministry of Electrical Engineering...and Electronics arrived in Shanghai on 24 June in the company of Comrade Xie Gaojue, vice minister of electronics industry . Comrade Felix Meier and

A Study on the Training Mode of Electronic Application-Oriented Undergraduate with Industry Needs

ERIC Educational Resources Information Center

Wang, Zhonghua; Cheng, Lifang; Wang, Hao

2017-01-01

Electronic industry is an economic pillar in China. Due to the Moore's Law, the industry requires continuous development and innovation. In order to achieve these goals, the cultivation of electronic application-oriented undergraduate is essential. However, at current, the innovative educational concepts and teaching methods are lagging behind so…

Communication and Industrial Electronics. Trade and Industrial Education Trade Preparatory Training Guide.

ERIC Educational Resources Information Center

Nebraska State Dept. of Education, Lincoln. Div. of Vocational Education.

One of a series of curriculum guides prepared for the electricity/electronics occupations cluster, this guide identifies the essentials of the communication and industrial electronics trade as recommended by the successful electrical servicemen. An instructional program based upon the implementation of the guide is expected to prepare a student to…

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

GHGRP Electronics Manufacturing Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Electronics Manufacturing industry.

Materials for high-density electronic packaging and interconnection

NASA Technical Reports Server (NTRS)

1990-01-01

Electronic packaging and interconnections are the elements that today limit the ultimate performance of advanced electronic systems. Materials in use today and those becoming available are critically examined to ascertain what actions are needed for U.S. industry to compete favorably in the world market for advanced electronics. Materials and processes are discussed in terms of the final properties achievable and systems design compatibility. Weak points in the domestic industrial capability, including technical, industrial philosophy, and political, are identified. Recommendations are presented for actions that could help U.S. industry regain its former leadership position in advanced semiconductor systems production.

Forces Shaping the Electronic Publishing Industry of the 1990s.

ERIC Educational Resources Information Center

Hawkins, Donald T.; And Others

1992-01-01

Reviews the conventional publishing industry, and discusses a study of the electronic publishing industry and its products and processes. Discusses seven major forces affecting it--technology, economics, demographics, social trends, government policies, applications growth, and industry trends--and outlines principles to follow for success in…

Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China.

PubMed

Wang, Junjun; Chen, Ming

2012-11-01

Recycling companies play a leading role in the system of end-of-life vehicles (ELVs) in China. Automotive manufacturers in China are rarely involved in recycling ELVs, and they seldom provide dismantling information for recycling companies. In addition, no professional shredding plant is available. The used automotive electronic control components recycling industry in China has yet to take shape because of the lack of supporting technology and profitable models. Given the rapid growth of the vehicle population and electronic control units in automotives in China, the used automotive electronic control components recycling industry requires immediate development. This paper analyses the current recycling system of ELVs in China and introduces the automotive product recycling technology roadmap as well as the recycling industry development goals. The strengths, weaknesses, opportunities and challenges of the current used automotive electronic control components recycling industry in China are analysed comprehensively based on the 'strengths, weaknesses, opportunities and threats' (SWOT) method. The results of the analysis indicate that this recycling industry responds well to all the factors and has good opportunities for development. Based on the analysis, new development strategies for the used automotive electronic control components recycling industry in accordance with the actual conditions of China are presented.

Exploring Electricity/Electronics. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with electricity and electronics. The following topics are covered in the individual lessons: the…

Data Documentation for Navy Civilian Manpower Study,

DTIC Science & Technology

1986-09-01

Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318

Terahertz radiation source using a high-power industrial electron linear accelerator

NASA Astrophysics Data System (ADS)

Kalkal, Yashvir; Kumar, Vinit

2017-04-01

High-power (˜ 100 kW) industrial electron linear accelerators (linacs) are used for irradiations, e.g., for pasteurization of food products, disinfection of medical waste, etc. We propose that high-power electron beam from such an industrial linac can first pass through an undulator to generate useful terahertz (THz) radiation, and the spent electron beam coming out of the undulator can still be used for the intended industrial applications. This will enhance the utilization of a high-power industrial linac. We have performed calculation of spontaneous emission in the undulator to show that for typical parameters, continuous terahertz radiation having power of the order of μW can be produced, which may be useful for many scientific applications such as multispectral imaging of biological samples, chemical samples etc.

Introduction to Industrial Electricity-Electronics. Oklahoma Trade and Industrial Education.

ERIC Educational Resources Information Center

Siebert, Leo N.; Pierce, Greg

This manual provides a basic core of instruction for both industrial electricity and industrial electronics. The information should be adapted and modified to coincide with local conditions and supplemented by the instructor's own methods and materials. The manual includes 6 sections (instructional areas) and 24 units. Each unit of instruction…

Electronic flight bag (EFB) : 2010 industry survey

DOT National Transportation Integrated Search

2010-09-01

This document provides an overview of Electronic Flight Bag (EFB) systems and capabilities, as of June 2010. This document updates and replaces the April 2007 EFB Industry Review (Yeh and Chandra, 2007). As with the previous industry survey, the focu...

Analysis of phthalate esters in soils near an electronics manufacturing facility and from a non-industrialized area by gas purge microsyringe extraction and gas chromatography.

PubMed

Wu, Wei; Hu, Jia; Wang, Jinqi; Chen, Xuerong; Yao, Na; Tao, Jing; Zhou, Yi-Kai

2015-03-01

Here, a novel technique is described for the extraction and quantitative determination of six phthalate esters (PAEs) from soils by gas purge microsyringe extraction and gas chromatography. Recovery of PAEs ranged from 81.4% to 120.3%, and the relative standard deviation (n=6) ranged from 5.3% to 10.5%. Soil samples were collected from roadsides, farmlands, residential areas, and non-cultivated areas in a non-industrialized region, and from the same land-use types within 1 km of an electronics manufacturing facility (n=142). Total PAEs varied from 2.21 to 157.62 mg kg(-1) in non-industrialized areas and from 8.63 to 171.64 mg kg(-1) in the electronics manufacturing area. PAE concentrations in the non-industrialized area were highest in farmland, followed (in decreasing order) by roadsides, residential areas, and non-cultivated soil. In the electronics manufacturing area, PAE concentrations were highest in roadside soils, followed by residential areas, farmland, and non-cultivated soils. Concentrations of dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP) differed significantly (P<0.01) between the industrial and non-industrialized areas. Principal component analysis indicated that the strongest explanatory factor was related to DMP and DnBP in non-industrialized soils and to butyl benzyl phthalate (BBP) and DMP in soils near the electronics manufacturing facility. Congener-specific analysis confirmed that diethylhexyl phthalate (DEHP) was a predictive indication both in the non-industrialized area (r(2)=0.944, P<0.01) and the industrialized area (r(2)=0.860, P<0.01). The higher PAE contents in soils near the electronics manufacturing facility are of concern, considering the large quantities of electronic wastes generated with ongoing industrialization. Copyright © 2014 Elsevier B.V. All rights reserved.

Electronic Computer Aided Design. Its Application in FE.

ERIC Educational Resources Information Center

Further Education Unit, London (England).

A study was conducted at the Electronics Industrial Unit at the Dorset Institute of Higher Education to investigate the feasibility of incorporating computer-aided design (CAD) in electrical and electronic courses. The aim was to investigate the application of CAD to electrical and electronic systems; the extent to which industrial developments…

Applied Industrial Electronics: Power Control and Electronic Troubleshooting.

ERIC Educational Resources Information Center

Morrow, Rick; Humler, John

This curriculum guide is designed to build upon the skills and knowledge of industrial electronics gained by the student through the learning activities of the introductory volumes of the electronics program. Specifically, the student, whether in secondary, postsecondary, or adult education, will have the opportunity to expand those skills in…

An assembly system based on industrial robot with binocular stereo vision

NASA Astrophysics Data System (ADS)

Tang, Hong; Xiao, Nanfeng

2017-01-01

This paper proposes an electronic part and component assembly system based on an industrial robot with binocular stereo vision. Firstly, binocular stereo vision with a visual attention mechanism model is used to get quickly the image regions which contain the electronic parts and components. Secondly, a deep neural network is adopted to recognize the features of the electronic parts and components. Thirdly, in order to control the end-effector of the industrial robot to grasp the electronic parts and components, a genetic algorithm (GA) is proposed to compute the transition matrix and the inverse kinematics of the industrial robot (end-effector), which plays a key role in bridging the binocular stereo vision and the industrial robot. Finally, the proposed assembly system is tested in LED component assembly experiments, and the results denote that it has high efficiency and good applicability.

A Curriculum Guide for Intermediate and Secondary Level Programs. Industrial Arts: Electricity-Electronics.

ERIC Educational Resources Information Center

Missouri State Dept. of Education, Jefferson City.

Units of instruction at four levels are designed for use by teachers preparing industrial arts courses in electricity and electronics in junior high and high school. Exploring Electricity-Electronics introduces the subject with attention to circuits, laws, and applications. Basic Electricity-Electronics covers batteries, magnetism, transformers,…

Electronic Flight Bag (EFB) : 2005 industry review

DOT National Transportation Integrated Search

2005-04-01

The Electronic Flight Bag (EFB) market has accelerated rapidly in the past few years. The purpose of this industry review is to provide a primer on who is involved in the industry and what their efforts are. This informal summary of EFB technology pr...

Defence electronics industry profile, 1990-1991

NASA Astrophysics Data System (ADS)

The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

Electron-processing technology: A promising application for the viscose industry

NASA Astrophysics Data System (ADS)

Stepanik, T. M.; Rajagopal, S.; Ewing, D.; Whitehouse, R.

1998-06-01

In marketing its IMPELA ® line of high power, high-throughput industrial accelerators, Atomic Energy of Canada Limited (AECL) is working with viscose (rayon) companies world-wide to integrate electron-processing technology as part of the viscose manufacturing process. The viscose industry converts cellulose wood pulp into products such as staple fiber, filament, cord, film, packaging, and non-edible sausage casings. This multibillion dollar industry is currently suffering from high production costs, and is facing increasingly stringent environmental regulations. The use of electron-treated pulp can significantly lower production costs and can provide equally significant environmental benefits. This paper describes our current understanding of the benefits of using electron-treated pulp in this process, and AECL's efforts in developing this technology.

The Impact of Electronic Commerce on the Publishing Industry: Towards a Business Value Complementarity Framework of Electronic Publishing.

ERIC Educational Resources Information Center

Scupola, Ada

1999-01-01

Discussion of the publishing industry and its use of information and communication technologies focuses on the way in which electronic-commerce technologies are changing and could change the publishing processes, and develops a business complementarity model of electronic publishing to maximize profitability and improve the competitive position.…

Electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

The National Si-Soft Project

NASA Astrophysics Data System (ADS)

Chang, Chun-Yen; Trappey, Charles V.

2003-06-01

Taiwan's electronics industry emerged in the 1960s with the creation of a small but well planned integrated circuit (IC) packaging industry. This industry investment led to bolder investments in research, laboratories, and the island's first semiconductor foundries in the 1980s. Following the success of the emerging IC manufacturers and design houses, hundreds of service firms and related industries (software, legal services, substrate, chemical, and test firms among others) opened for business and completed Taiwan's IC manufacturing supply chain. The challenge for Taiwan's electronics industry is to take the lead in the design, manufacture, and marketing of name brand electronic products. This paper introduces the Si-Soft (silicon software) Project, a national initiative that builds on Taiwan's achievements in manufacturing (referred to as Si-Hard or silicon hardware) to launch a new wave of companies. These firms will contribute to the core underlying technology (intellectual property) used in the creation of electronic products.

Electrical/Electronic Technology (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Lawrence, Allen; And Others

This course guide for an electrical/electronic technology course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a…

Robotics in Industrial Arts. Final Narrative Report for the Exemplary Project.

ERIC Educational Resources Information Center

Ascension Parish School Board, Donaldsonville, LA.

To introduce students to the world of robotics and industrial automation, robotics was introduced to students enrolled in electronics classes in the industrial arts program at St. Amant High School (Louisiana). Three robots, three host microcomputers, and necessary software were purchased. The electronics instructor installed the three robots…

A Suggested Basic Course Outline for Industrial Electronics.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This course outline for industrial electronics, one of a series for teaching vocational industrial shop subjects in public schools, includes basic skills and technical information for the course. It should be supplemented with other complementary and necessary areas of related instruction. Fifteen major blocks, divided into 2 years of instruction,…

Hazardous Waste Cleanup: Electronic Parts Specialty Company in Lumberton Township, New Jersey

EPA Pesticide Factsheets

The Electronics Parts Specialty Company (EPSCO) is located at 41 Coles Avenue in Lumberton Township, New Jersey. EPSCO is a 4.83-acre active industrial facility that has processed metal components for the electronics industry since the mid-1940s. From 1900

77 FR 9945 - Draft Guidance for Industry on Providing Submissions in Electronic Format-Standardized Study Data...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

...] Draft Guidance for Industry on Providing Submissions in Electronic Format--Standardized Study Data... Submissions in Electronic Format--Standardized Study Data.'' This draft guidance establishes FDA's recommendation that sponsors and applicants submit nonclinical and clinical study data in a standardized...

How the new optoelectronic design automation industry is taking advantage of preexisting EDA standards

NASA Astrophysics Data System (ADS)

Nesmith, Kevin A.; Carver, Susan

2014-05-01

With the advancements in design processes down to the sub 7nm levels, the Electronic Design Automation industry appears to be coming to an end of advancements, as the size of the silicon atom becomes the limiting factor. Or is it? The commercial viability of mass-producing silicon photonics is bringing about the Optoelectronic Design Automation (OEDA) industry. With the science of photonics in its infancy, adding these circuits to ever-increasing complex electronic designs, will allow for new generations of advancements. Learning from the past 50 years of the EDA industry's mistakes and missed opportunities, the photonics industry is starting with electronic standards and extending them to become photonically aware. Adapting the use of pre-existing standards into this relatively new industry will allow for easier integration into the present infrastructure and faster time to market.

A new e-beam application in the pharmaceutical industry

NASA Astrophysics Data System (ADS)

Sadat, Theo; Malcolm, Fiona

2005-10-01

The paper presents a new electron beam application in the pharmaceutical industry: an in-line self-shielded atropic transfer system using electron beam for surface decontamination of products entering a pharmaceutical filling line. The unit was developed by Linac Technologies in response to the specifications of a multi-national pharmaceutical company, to solve the risk of microbial contamination entering a filling line housed inside an isolator. In order to fit the sterilization unit inside the pharmaceutical plant, a "miniature" low-energy (200 keV) electron beam accelerator and e-beam tunnel were designed, all conforming to the pharmaceutical good manufacturing practice (GMP) regulations. Process validation using biological indicators is described, with reference to the regulations governing the pharmaceutical industry. Other industrial applications of a small-sized self-shielded electron beam sterilization unit are mentioned.

Electron beams in research and technology

NASA Astrophysics Data System (ADS)

Mehnert, R.

1995-11-01

Fast electrons lose their energy by inelastic collisions with electrons of target molecules forming secondary electrons and excited molecules. Coulomb interaction of secondary electrons with valence electrons of neighboring molecules leads to the formation of radical cations, thermalized electrons, excited molecular states and radicals. The primary reactive species initiate chemical reactions in the materials irradiated. Polymer modifications using accelerated electrons such as cross-linking of cable insulation, tubes, pipes and moldings, vulcanization of elastomers, grafting of polymer surfaces, processing of foamed plastics and heat shrinkable materials have gained wide industrial acceptance. A steadily growing electron beam technology is curing of paints, lacquers, printing inks and functional coatings. Electron beam processing offers high productivity, the possibility to treat the materials at normal temperature and pressure, excellent process control and clean production conditions. On an industrial scale the most important application of fast electrons is curing of 100% reactive monomer/prepolymer systems. Mainly acrylates and epoxides are used to formulate functional coatings on substrates such as paper, foil, wood, fibre board and high pressure laminates. A survey is given about the reaction mechanism of curing, the characterization of cured coatings, and of some industrial application.

ELECTRONIC TECHNICIAN PERSONNEL AND TRAINING NEEDS OF IOWA INDUSTRIES.

ERIC Educational Resources Information Center

WEEDE, GARY DEAN

THE PURPOSE OF THIS STUDY WAS TO PROVIDE DATA FOR USE IN DEVELOPING OR IMPROVING ELECTRONIC TECHNOLOGY PROGRAMS. A POSTAL CARD QUESTIONNAIRE WAS SENT TO 678 MANUFACTURING AND PROCESSING INDUSTRIES IN IOWA EMPLOYING MORE THAN 50 PERSONS AND ALL ELECTRICAL, ELECTRONIC, AND PRECISION INSTRUMENT MANUFACTURERS EMPLOYING FEWER THAN 50 PERSONS. DATA WERE…

Electricity-Electronics for Industrial Arts. Instructors Lesson Plans. Industrial Arts Series, Publication Number 10,010.

ERIC Educational Resources Information Center

Hinrichs, Roy S., Comp.

Thirty-one lesson plans on electricity-electronics are presented in this guide designed for industrial arts instructors. Each lesson plan is organized into the following format: (1) lesson objective; (2) supplementary teaching items; (3) presentation; (4) demonstration; (5) laboratory or other activities; and (6) test items (oral, written, or…

Occupational asthma due to colophony in non-industrial environments.

PubMed

Mariano, A; Paredes, I; Nuti, R; Innocenti, A

1993-01-01

Colophony is largely used in industrial environments, like the electronics and the rubber tyre industries, but it is also present in non-industrial environments as a constituent of glues and paper. For this reason it is one of the commonest skin sensitizers. Many cases of occupational asthma due to colophony have been described, but reports apart from electronic industry are not common. The case is described of a subject employed in administrative work who developed asthma due to colophony from using sealing wax to seal samples of food packages.

Improving extreme-scale problem solving: assessing electronic brainstorming effectiveness in an industrial setting.

PubMed

Dornburg, Courtney C; Stevens, Susan M; Hendrickson, Stacey M L; Davidson, George S

2009-08-01

An experiment was conducted to compare the effectiveness of individual versus group electronic brainstorming to address difficult, real-world challenges. Although industrial reliance on electronic communications has become ubiquitous, empirical and theoretical understanding of the bounds of its effectiveness have been limited. Previous research using short-term laboratory experiments have engaged small groups of students in answering questions irrelevant to an industrial setting. The present experiment extends current findings beyond the laboratory to larger groups of real-world employees addressing organization-relevant challenges during the course of 4 days. Employees and contractors at a national laboratory participated, either in a group setting or individually, in an electronic brainstorm to pose solutions to a real-world problem. The data demonstrate that (for this design) individuals perform at least as well as groups in producing quantity of electronic ideas, regardless of brainstorming duration. However, when judged with respect to quality along three dimensions (originality, feasibility, and effectiveness), the individuals significantly (p < .05) outperformed the group. When quality is used to benchmark success, these data indicate that work-relevant challenges are better solved by aggregating electronic individual responses rather than by electronically convening a group. This research suggests that industrial reliance on electronic problem-solving groups should be tempered, and large nominal groups may be more appropriate corporate problem-solving vehicles.

Space Station - The base for tomorrow's electronic industry

NASA Technical Reports Server (NTRS)

Naumann, Robert J.

1985-01-01

The potential value of space material processing on the Space Station for the electronics industry is examined. The primary advantages of the space environment for producing high-purity semiconductors and electrooptical materials are identified as the virtual absence of gravity (suppressing buoyancy-driven convection in melts and density segregation of alloys) and the availabilty of high vacuum (with high pumping speed and heat rejection). The recent history of material development and processing technology in the electronics industry is reviewed, and the principal features of early space experiments are outlined.

Some new evidence on bond initial public offerings in the Taiwan Stock Exchange: An industrial perspective

NASA Astrophysics Data System (ADS)

Ke, Mei-Chu; Liang Liao, Tung; Hsu, Hong-Ming

2007-05-01

This study examines the determinants of types of bonds at the initial public offerings (IPOs) for the Taiwan Stock Exchange (TWSE). From an industrial perspective, R&D expenditures are mainly positively related to issuing straight bonds and future growth opportunities to convertible bonds for electronic firms. In the non-electronic industry, firms with significant financing needs are more likely to issue convertible bonds, whereas those without such requirement are more likely to issue straight bonds. It is also found that electronic firms convey a significant negative signal to the stock market, while non-electronic firms experience an insignificant stock price response surrounding the announcements of the bond IPO.

Electronics reliability and measurement technology

NASA Technical Reports Server (NTRS)

Heyman, Joseph S. (Editor)

1987-01-01

A summary is presented of the Electronics Reliability and Measurement Technology Workshop. The meeting examined the U.S. electronics industry with particular focus on reliability and state-of-the-art technology. A general consensus of the approximately 75 attendees was that "the U.S. electronics industries are facing a crisis that may threaten their existence". The workshop had specific objectives to discuss mechanisms to improve areas such as reliability, yield, and performance while reducing failure rates, delivery times, and cost. The findings of the workshop addressed various aspects of the industry from wafers to parts to assemblies. Key problem areas that were singled out for attention are identified, and action items necessary to accomplish their resolution are recommended.

Electronic flight bag (EFB) : 2007 industry review

DOT National Transportation Integrated Search

2007-04-01

This document, which is based on information from March 2007, proivdes an overview of Electronic Flight Bag (EFB) systems and capabilities, with particular focus on the systems' human interface. It updates the April 2005 EFB Industry Review (Yeh and ...

Employment Lessons from the Electronics Industry.

ERIC Educational Resources Information Center

Alic, John A.; Harris, Martha Caldwell

1986-01-01

Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

Vacuum and the electron tube industry

NASA Astrophysics Data System (ADS)

Redhead, P. A.

2005-07-01

The electron tube industry started with the patenting of the thermionic diode by John Ambrose Fleming in 1904. The vacuum technology used by the infant tube industry was copied from the existing incandescent lamp industry. The growing demands for electron tubes for the military in the first world war led to major improvements in pumps and processing methods. By the 1920s, mass production methods were developing to satisfy the demands for receiving tubes by the burgeoning radio industry. Further expansion in the 1930s and 1940s resulted in improvements in automatic equipment for pumping vacuum tubes leading to the massive production rates of electron tubes in the second world war and the following two decades. The demand for radar during the war resulted in the development of techniques for large-scale production of microwave tubes and CRTs, the latter technology being put to good use later in TV picture tube production. The commercial introduction of the transistor ended the massive demand for receiving tubes. This review concentrates on the vacuum technology developed for receiving tube production.

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Thermophysical and Electronic Properties Information Analysis Center (TEPIAC): A Continuing Systematic Program on Data Tables of Thermophysical and Electronic Properties of Materials.

DTIC Science & Technology

1980-03-01

laboratories and agencies, defense contractors and other industrial organizations, and academic institutions. Furthermore, under multiple sponsorship...agencies, defense contractors and other industrial organizations, and academic institutions. Furthermore, under multiple sponsorship four volumes of...1,091 Inquiries from defense contractors and other industrial organizations ... ........... 357 4,007 Inquiries from academic institutions

Korean Affairs Report No. 286

DTIC Science & Technology

1983-06-08

will attempt to destroy factories and industrial estab- lishments in Pusan, Masan, Taegu, Ulsan, Pohang, Kwangju and other major cities, it said... industry is expected to be intensified in the months to come with the Daewoo Electronic Co developing many new models since it took over the electric...The projected optical fiber communications systems will mark a milestone in the annals of the Korean electronic industry because automation in the

Electron treatment of wood pulp for the viscose process

NASA Astrophysics Data System (ADS)

Stepanik, T. M.; Ewing, D. E.; Whitehouse, R.

2000-03-01

Electron processing is currently being evaluated by several viscose producers for integration into their process. The viscose industry converts dissolving wood pulp into products such as staple fibre, filament, cord, film, packaging, and non-edible sausage casings. These materials are used in the clothing, drapery, hygiene, automobile, food, and packaging industries. Viscose producers are facing increasingly high production costs and stringent environmental regulations that have forced some plants to close. Electron treatment of wood pulp can significantly reduce the amounts of chemicals used for producing viscose and the production of hazardous pollutants. Acsion Industries has worked with companies worldwide to demonstrate the benefits of using electron treated pulp for producing viscose (rayon). This paper describes the viscose process, the benefits of using electron treatment in the viscose process, and Acsion's efforts in developing this technology.

Electronic Commerce Resource Centers. An Industry--University Partnership.

ERIC Educational Resources Information Center

Gulledge, Thomas R.; Sommer, Rainer; Tarimcilar, M. Murat

1999-01-01

Electronic Commerce Resource Centers focus on transferring emerging technologies to small businesses through university/industry partnerships. Successful implementation hinges on a strategic operating plan, creation of measurable value for customers, investment in customer-targeted training, and measurement of performance outputs. (SK)

Specific Needs for Updating Educational Experiences as Reported by Instructors of Electronics in Industrial Education Departments of Colleges and Universities.

ERIC Educational Resources Information Center

Slater, John Breisch

A survey of 133 industrial education electronics instructors in 115 4-year colleges and universities in 40 states was conducted to determine the expressed needs of college level electronics instructors for updating educational experiences in specified elements. An attempt was also made to determine the nature of course content needed in graduate…

MERCURY REDUCTION IN PRODUCTS AND PROCESSES: A REVIEW OF THE ELECTRICAL AND ELECTRONIC INDUSTRIES

EPA Science Inventory

The electrical and electronics industries have significantly reduced the amount of mercury from various products and processes. However, the unique electromechanical and photoelectronic properties of mercury and mercury compounds have made replacement of mercury difficult in some...

76 FR 1173 - Draft Guidance for Industry on Electronic Source Documentation in Clinical Investigations...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...] Draft Guidance for Industry on Electronic Source Documentation in Clinical Investigations; Availability... Documentation in Clinical Investigations.'' This document provides guidance to sponsors, contract research organizations (CROs), data management centers, and clinical investigators on capturing, using, and archiving...

MERCURY REDUCTION IN PRODUCTS AND PROCESSES: A REVIEW OF THE ELECTRICAL AND ELECTRONIC INDUSTRIES

EPA Science Inventory

The electrical and electronics industries have significantly reduced the amount of mercury from various products and processes. owever, the unique electromechanical and photoelectronic properties of mercury and mercury compounds have made replacement of mercury difficult in some ...

47 CFR 68.316 - Hearing aid compatibility: Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the Telecommunications Industry Association: Electronic Industries Association Recommended Standard RS... electronic amplifying device, intended to increase the loudness of sound and worn to compensate for impaired... telephones, e.g., proprietary or digital telephones, an appropriate feed circuit and termination shall be...

47 CFR 68.316 - Hearing aid compatibility: Technical requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the Telecommunications Industry Association: Electronic Industries Association Recommended Standard RS... electronic amplifying device, intended to increase the loudness of sound and worn to compensate for impaired... telephones, e.g., proprietary or digital telephones, an appropriate feed circuit and termination shall be...

Marketing Violent Entertainment to Children: A Twenty-One Month Follow-Up Review of Industry Practices in the Motion Picture, Music Recording and Electronic Game Industries. A Report to Congress.

ERIC Educational Resources Information Center

Federal Trade Commission, Washington, DC.

In a report issued in September 2000, the Federal Trade Commission contended that the motion picture, music recording, and electronic game industries had engaged in widespread marketing of violent movies, music, and games to children inconsistent with their own parental advisories and undermining parents attempts to make informed decisions about…

Marketing Violent Entertainment to Children: A One-Year Follow-Up Review of Industry Practices in the Motion Picture, Music Recording and Electronic Game Industries. A Report to Congress.

ERIC Educational Resources Information Center

Federal Trade Commission, Washington, DC.

In a report issued in September 2000, the Federal Trade Commission reported that the motion picture, music recording, and electronic game segments of the entertainment industry intentionally promoted products to children that warranted parent cautions. This report responds to the request of the Senate Commerce Committee by focusing on advertising…

Prosperity Games prototyping with the board of governors of the Electronic Industries Association, January 20--21, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bermann, M.; VanDevender, J.P.

1994-08-01

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the Electronic Industries Association. Almost all ofmore » the players were from the electronics industry. The game explored policy changes that could enhance US competitiveness in the manufacturing of consumer electronics. Four teams simulated a presidentially appointed commission comprised of high-level representatives from government, industry, universities and national laboratories. A single team represented the foreign equivalent of this commission, formed to develop counter strategies for any changes in US policies. The deliberations and recommendations of these teams provide valuable insights as to the views of this industry concerning policy changes, foreign competition, and the development, delivery and commercialization of new technologies.« less

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review.

PubMed

Nagels, Steven; Deferme, Wim

2018-03-03

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review

PubMed Central

Nagels, Steven

2018-01-01

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application. PMID:29510497

Japan's electronic packaging technologies

NASA Technical Reports Server (NTRS)

Tummala, Rao R.; Pecht, Michael

1995-01-01

The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

The New Industrial Electrics/Electronics Occupations.

ERIC Educational Resources Information Center

German Federal Inst. for Vocational Training Affairs, Berlin (Germany).

This publication provides information on occupations in industrial electrics/electronics in the Federal Republic of Germany. Section I contains the German vocational training regulations for these occupations, including an overview of training, examinations, and the new notion of qualification. A chart illustrates the structure for training in…

The impact of semiconductor, electronics and optoelectronic industries on downstream perfluorinated chemical contamination in Taiwanese rivers.

PubMed

Lin, Angela Yu-Chen; Panchangam, Sri Chandana; Lo, Chao-Chun

2009-04-01

This study provides the first evidence on the influence of the semiconductor and electronics industries on perfluorinated chemicals (PFCs) contamination in receiving rivers. We have quantified ten PFCs, including perfluoroalkyl sulfonates (PFASs: PFBS, PFHxS, PFOS) and perfluoroalkyl carboxylates (PFCAs: PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA) in semiconductor, electronic, and optoelectronic industrial wastewaters and their receiving water bodies (Taiwan's Keya, Touchien, and Xiaoli rivers). PFOS was found to be the major constituent in semiconductor wastewaters (up to 0.13 mg/L). However, different PFC distributions were found in electronics plant wastewaters; PFOA was the most significant PFC, contributing on average 72% to the effluent water samples, followed by PFOS (16%) and PFDA (9%). The distribution of PFCs in the receiving rivers was greatly impacted by industrial sources. PFOS, PFOA and PFDA were predominant and prevalent in all the river samples, with PFOS detected at the highest concentrations (up to 5.4 microg/L).

International Competitiveness in Electronics.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This assessment continues the Office of Technology Assessment's (OTA) exploration of the meaning of industrial policy in the United States context, while also examining the industrial policies of several U.S. economic rivals. The major focus is on electronics, an area which virtually defines "high technology" of the 1980's. The…

Exposure assessment of workers in printed electronics workplace.

PubMed

Lee, Ji Hyun; Sohn, Eun Kyung; Ahn, Jin Soo; Ahn, Kangho; Kim, Keun Soo; Lee, Jong Hwan; Lee, Taik Min; Yu, Il Je

2013-07-01

Printed electronics uses converging technologies, such as printing, fine mechanics, nanotechnology, electronics and other new technologies. Consequently, printed electronics raises additional health and safety concerns to those experienced in the traditional printing industry. This study investigated two printed electronics workplaces based on a walk-through survey and personal and area sampling. All the printed electronics operations were conducted in a cleanroom. No indication of exposure to excess silver nanoparticles or carbon nanotubes (CNTs) was found. While the organic solvents were lower than current occupational exposure limits, there was a lack of engineering controls, such as local exhaust ventilation, correct enclosure and duct connections. There was also an insufficient quantity of personal protective equipment, and some organic solvents not described in the safety data sheets (SDSs) were detected in the air samples. Plus, the cleaning work, a major emissions operation, was not conducted within a hood, and the cleaning waste was not properly disposed of. Therefore, the present exposure assessment results from two printed electronics workplaces suggest that the printed electronics industry needs to take note of the occupational safety and health risks and hazards already established by the traditional printing industry, along with new risks and hazards originating from converging technologies such as nanotechnology.

Industrial Arts Curriculum Guide for Electricity/Electronics.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

This curriculum provides a behaviorally written guide that offers a possible list of objectives to assist in establishing or revising an electrical/electronics curriculum. Teachers may choose specific objectives to suit age group and educational level or expertise. Introductory material describes the scope and sequence of an Industrial Arts…

Industrial Electronics. Performance Objectives. Basic Course.

ERIC Educational Resources Information Center

Tiffany, Earl

Several intermediate performance objectives and corresponding criterion measures are listed for each of 30 terminal objectives for a two-semester (2 hours daily) high school course in basic industrial electronics. The objectives cover instruction in basic electricity including AC-DC theory, magnetism, electrical safety, care and use of hand tools,…

The New Publishing: Technology's Impact on the Publishing Industry over the Next Decade.

ERIC Educational Resources Information Center

Rawlins, Gregory J. E.

1992-01-01

Discusses technology's impact on the products, revenue sources, and distribution channels of the publishing industry over the next decade. Highlights include electronic books and copy protection; copyright; advantages of electronic books to users, libraries, and publishers; retailing schemes; changes in education; subscription publishing;…

Electronic Books: A Major Publishing Revolution. Part 1: General Considerations and Issues.

ERIC Educational Resources Information Center

Hawkins, Donald T.

2000-01-01

Discusses electronic books and their impact on the publishing industry. Topics include a history of the book industry; downloadable ebooks; dedicated ebook readers; Web-accessible ebooks; print-on-demand books; advantages and disadvantages; copyright; ebook concerns in libraries, including licensing, lack of standards, bibliographic control, and…

Canadian Federal Government Policy and Canada's Electronic Information Industry.

ERIC Educational Resources Information Center

Morton, Bruce

1995-01-01

Examines the history and process of information policy in Canada during the period from 1970 to 1994. Discusses the relationship of the Canadian federal government and the electronic information industry, crown copyright, the financial environment in the context of government policy, and recent developments. (235 references) (Author/AEF)

Industrial Electronics II for ICT. Student's Manual.

ERIC Educational Resources Information Center

Snider, Bob

This student manual contains the following six units for classroom and laboratory experiences in high school industrial electronics: (1) introduction and review of DC and AC circuits; (2) semiconductors; (3) integrated circuits; (4) digital basics; (5) complex digital circuits; and (6) computer circuits. The units include unit objectives, specific…

New electron beam facility for R&D and production at acsion industries

NASA Astrophysics Data System (ADS)

Lopata, V. J.; Barnard, J. W.; Saunders, C. B.; Stepanik, T. M.

2003-08-01

Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R&D capabilities. These modifications are described in this paper.

New Books for Industrial Educators

ERIC Educational Resources Information Center

School Shop, 1975

1975-01-01

The most recent book releases in the field of industrial-technical education are listed alphabetically under: automotive/power mechanics; building trades; drafting; electricity/electronics; graphic arts, industrial arts, vocational, technical and career education; industrial mathematics; machine shop/metalworking; metrics; radio/television;…

Adaptation of the Camera Link Interface for Flight-Instrument Applications

NASA Technical Reports Server (NTRS)

Randall, David P.; Mahoney, John C.

2010-01-01

COTS (commercial-off-the-shelf) hard ware using an industry-standard Camera Link interface is proposed to accomplish the task of designing, building, assembling, and testing electronics for an airborne spectrometer that would be low-cost, but sustain the required data speed and volume. The focal plane electronics were designed to support that hardware standard. Analysis was done to determine how these COTS electronics could be interfaced with space-qualified camera electronics. Interfaces available for spaceflight application do not support the industry standard Camera Link interface, but with careful design, COTS EGSE (electronics ground support equipment), including camera interfaces and camera simulators, can still be used.

Microelectronics in Japan

NASA Astrophysics Data System (ADS)

Boulton, William R.

1995-02-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Microelectronics in Japan

NASA Technical Reports Server (NTRS)

Boulton, William R.

1995-01-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Adsorption of Heavy Metals in Industrial Wastewater by Magnetic Nano-particles

NASA Astrophysics Data System (ADS)

Tu, Y.; You, C.

2010-12-01

Industrial wastewater containing heavy metals is of great concern because of their toxic impact to living species and environments. Removal of metal ions from industrial effluent using nano-particles is an area of extensive research. This study collected wastewaters and effluents from 11 industrial companies in tanning, electronic plating, printed circuit board manufacturing, semi-conductor, and metal surface treatment industry and studied in detailed the major and trace element compositions to develop potential fingerprinting technique for pollutant source identification. The results showed that electronic plating and metal surface treatment industry produce high Fe, Mn, Cr, Zn, Ni and Mo wastewater. The tanning industry and the printed circuit board manufacturing industry released wastewater with high Fe and Cr, Cu and Ni, respectively. For semi-conductor industry, significant dissolved In was detected in wastewater. The absorption experiments to remove heavy metals in waters were conducted using Fe3O4 nano-particles. Under optimal conditions, more than 99 % dissolved metals were removed in a few minutes.

Radiation Field Forming for Industrial Electron Accelerators Using Rare-Earth Magnetic Materials

NASA Astrophysics Data System (ADS)

Ermakov, A. N.; Khankin, V. V.; Shvedunov, N. V.; Shvedunov, V. I.; Yurov, D. S.

2016-09-01

The article describes the radiation field forming system for industrial electron accelerators, which would have uniform distribution of linear charge density at the surface of an item being irradiated perpendicular to the direction of its motion. Its main element is non-linear quadrupole lens made with the use of rare-earth magnetic materials. The proposed system has a number of advantages over traditional beam scanning systems that use electromagnets, including easier product irradiation planning, lower instantaneous local dose rate, smaller size, lower cost. Provided are the calculation results for a 10 MeV industrial electron accelerator, as well as measurement results for current distribution in the prototype build based on calculations.

Carbon footprint of electronic devices

NASA Astrophysics Data System (ADS)

Sloma, Marcin

2013-07-01

Paper assesses the greenhouse gas emissions related to the electronic sectors including information and communication technology and media sectors. While media often presents the carbon emission problem of other industries like petroleum industry, the airlines and automobile sectors, plastics and steel manufacturers, the electronics industry must include the increasing carbon footprints caused from their applications like media and entertainment, computers and cooling devices, complex telecommunications networks, cloud computing and powerful mobile phones. In that sense greenhouse gas emission of electronics should be studied in a life cycle perspective, including regular operational electricity use. Paper presents which product groups or processes are major contributors in emission. From available data and extrapolation of existing information we know that the information and communication technology sector produced 1.3% and media sector 1.7% of global gas emissions within production cycle, using the data from 2007.In the same time global electricity use of that sectors was 3.9% and 3.2% respectively. The results indicate that for both sectors operation leads to more gas emissions than manufacture, although impacts from the manufacture is significant, especially in the supply chain. Media electronics led to more emissions than PCs (manufacture and operation). Examining the role of electronics in climate change, including disposal of its waste, will enable the industry to take internal actions, leading to lowering the impact on the climate change within the sector itself.

Electronics

DTIC Science & Technology

2001-01-01

International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

Electronic Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in electronic technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

A Hierarchy Fuzzy MCDM Method for Studying Electronic Marketing Strategies in the Information Service Industry.

ERIC Educational Resources Information Center

Tang, Michael T.; Tzeng, Gwo-Hshiung

In this paper, the impacts of Electronic Commerce (EC) on the international marketing strategies of information service industries are studied. In seeking to blend humanistic concerns in this research with technological development by addressing challenges for deterministic attitudes, the paper examines critical environmental factors relevant to…

Introduction to Electronics. Training Workbook.

ERIC Educational Resources Information Center

Anoka-Hennepin Technical Coll., Minneapolis, MN.

This workbook is intended for students enrolled in a 3-day introductory course to electronics developed during a project to retrain defense industry workers at risk of job loss or dislocation because of conversion of the defense industry. The workbook begins with a course outline and is divided into three sections that parallel the following…

Industrial Electronics II for ICT. Instructor's Guide and Curriculum Guide.

ERIC Educational Resources Information Center

Snider, Bob; Notgrass, Troy

This manual is designed to help instructors guide students through their manuals and laboratory training stations in the field of industrial electronics. The manual consists of the following nine sections: (1) suggestions for teaching the course; (2) an instructional delivery outline; (3) lists of essential elements common to all trade and…

KF post-deposition treatment of industrial Cu(In, Ga)(S, Se) 2 thin-film surfaces: Modifying the chemical and electronic structure

DOE PAGES

Mezher, Michelle; Mansfield, Lorelle M.; Horsley, Kimberly; ...

2017-08-14

The chemical and electronic structures of industrial chalcopyrite photovoltaic absorbers after KF post-deposition treatment (KF-PDT) are investigated using electron spectroscopies to probe the occupied and unoccupied electronic states. In contrast to a variety of recent publications on the impact of KF-PDT, this study focuses on industrial Cu(In,Ga)(S,Se) 2 absorbers that also contain sulfur at the surface. We find that the KF-PDT removes surface adsorbates and oxides and also observe a change in the S/Se ratio. Furthermore, the KF-PDT leads to a Cu reduction at the surface but to a much lower degree than the strongly Cu-depleted or even Cu-free surfacesmore » reported for (non-industrial) sulfur-free Cu(In,Ga)Se 2 absorbers. Furthermore, the valence band maximum at the surface is found at a lower energy compared to the untreated absorber, and the conduction band minimum is found at a higher energy, overall revealing a widening of the bandgap in the surface region.« less

KF post-deposition treatment of industrial Cu(In, Ga)(S, Se) 2 thin-film surfaces: Modifying the chemical and electronic structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mezher, Michelle; Mansfield, Lorelle M.; Horsley, Kimberly

The chemical and electronic structures of industrial chalcopyrite photovoltaic absorbers after KF post-deposition treatment (KF-PDT) are investigated using electron spectroscopies to probe the occupied and unoccupied electronic states. In contrast to a variety of recent publications on the impact of KF-PDT, this study focuses on industrial Cu(In,Ga)(S,Se) 2 absorbers that also contain sulfur at the surface. We find that the KF-PDT removes surface adsorbates and oxides and also observe a change in the S/Se ratio. Furthermore, the KF-PDT leads to a Cu reduction at the surface but to a much lower degree than the strongly Cu-depleted or even Cu-free surfacesmore » reported for (non-industrial) sulfur-free Cu(In,Ga)Se 2 absorbers. Furthermore, the valence band maximum at the surface is found at a lower energy compared to the untreated absorber, and the conduction band minimum is found at a higher energy, overall revealing a widening of the bandgap in the surface region.« less

Electron beam accelerator: A new tool for environmental preservation in Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hashim, Siti Aiasah; Bakar, Khomsaton Abu; Othman, Mohd Nahar

2012-09-26

Electron beam accelerators are widely used for industrial applications such as surface curing, crosslinking of wires and cables and sterilization/ decontamination of pharmaceutical products. The energy of the electron beam determines the type of applications. This is due to the penetration power of the electron that is limited by the energy. In the last decade, more work has been carried out to utilize the energetic electron for remediation of environmental pollution. For this purposes, 1 MeV electron beam accelerator is sufficient to treat wastewater from textile industry and flue gases from fossil fuel combustions. In Nuclear Malaysia, a variable energymore » Cockroft Walton type accelerator has been utilized to initiate investigations in these two areas. An electron beam flue gas treatment test rig was built to treat emission from diesel combustion, where it was found that using EB parameters of 1MeV and 12mA can successfully remove at least 80% of nitric oxide in the emission. Wastewater from textile industries was treated using combination of biological treatment and EB. The initial findings indicated that the quality of water had improved based on the COD{sub Cr}, BOD{sub 5} indicators.« less

Electron beam accelerator: A new tool for environmental preservation in Malaysia

NASA Astrophysics Data System (ADS)

Hashim, Siti Aiasah; Bakar, Khomsaton Abu; Othman, Mohd Nahar

2012-09-01

Electron beam accelerators are widely used for industrial applications such as surface curing, crosslinking of wires and cables and sterilization/ decontamination of pharmaceutical products. The energy of the electron beam determines the type of applications. This is due to the penetration power of the electron that is limited by the energy. In the last decade, more work has been carried out to utilize the energetic electron for remediation of environmental pollution. For this purposes, 1 MeV electron beam accelerator is sufficient to treat wastewater from textile industry and flue gases from fossil fuel combustions. In Nuclear Malaysia, a variable energy Cockroft Walton type accelerator has been utilized to initiate investigations in these two areas. An electron beam flue gas treatment test rig was built to treat emission from diesel combustion, where it was found that using EB parameters of 1MeV and 12mA can successfully remove at least 80% of nitric oxide in the emission. Wastewater from textile industries was treated using combination of biological treatment and EB. The initial findings indicated that the quality of water had improved based on the CODCr, BOD5 indicators.

BOK-Printed Electronics

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2013-01-01

The use of printed electronics technologies (PETs), 2D or 3D printing approaches either by conventional electronic fabrication or by rapid graphic printing of organic or nonorganic electronic devices on various small or large rigid or flexible substrates, is projected to grow exponentially in commercial industry. This has provided an opportunity to determine whether or not PETs could be applicable for low volume and high-reliability applications. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the current status of organic and printed electronics technologies. It reviews three key industry roadmaps- on this subject-OE-A, ITRS, and iNEMI-each with a different name identification for this emerging technology. This followed by a brief review of the status of the industry on standard development for this technology, including IEEE and IPC specifications. The report concludes with key technologies and applications and provides a technology hierarchy similar to those of conventional microelectronics for electronics packaging. Understanding key technology roadmaps, parameters, and applications is important when judicially selecting and narrowing the follow-up of new and emerging applicable technologies for evaluation, as well as the low risk insertion of organic, large area, and printed electronics.

Advanced Electronic Systems. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Patrick, Dale R.

This curriculum for a 1-semester or 1-year course in electronics is designed to take students from basic through advanced electronic systems. It covers several electronic areas, such as digital electronics, communication electronics, industrial process control, instrumentation, programmable controllers, and robotics. The guide contains…

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Waterpipe industry products and marketing strategies: analysis of an industry trade exhibition

PubMed Central

Jawad, Mohammed; Nakkash, Rima T; Hawkins, Ben; Akl, Elie A

2016-01-01

Introduction Understanding product development and marketing strategies of transnational tobacco companies (TTCs) has been of vital importance in developing effective tobacco control policy. However, comparatively little is known of the waterpipe tobacco industry, which TTCs have recently entered. This study aimed to gain an understanding of waterpipe tobacco products and marketing strategies by visiting a waterpipe trade exhibition. Methods In April 2014 the first author attended an international waterpipe trade exhibition, recording descriptions of products and collecting all marketing items available. We described the purpose and function of all products, and performed a thematic analysis of messages in marketing material. Results We classified the waterpipe products into seven categories and noted product variation within categories. Electronic waterpipe products (which mimic electronic cigarettes) rarely appeared on waterpipe tobacco marketing material, but were displayed just as widely. Claims of reduced harm, safety and quality were paramount on marketing materials, regardless of whether they were promoting waterpipe tobacco, waterpipe tobacco-substitutes, electronic waterpipes or charcoal. Conclusions Waterpipe products are diverse in nature and are marketed as healthy and safe products. Furthermore, the development of electronic waterpipe products appear to be closely connected with the electronic cigarette industry, rather than the waterpipe tobacco manufacturers. Tobacco control policy must evolve to take account of the vast and expanding array of waterpipe products, and potentially also charcoal products developed for waterpipe smokers. We recommend tobacco-substitutes be classified as tobacco products. Continued surveillance of the waterpipe industry is warranted. PMID:26149455

New Technology Industries. Skills Task Force Research Paper 10.

ERIC Educational Resources Information Center

Hendry, Chris

This paper provides an overview of the growth of new technology industries in Great Britain and the skills needed for these industries. The industries are advanced materials, biotechnology, and opto-electronics. The report profiles the current status, expected growth, and skills needed for each of these industry sectors. It also points out the…

China Report, Economic Affairs

DTIC Science & Technology

1985-02-02

40 Briefs Shanghai Food Industry Production 41 Jiangsu’s Industrial Output Value 41 CONSTRUCTION JINGJI RIBAO Urges Putting Construction First... industry , such as electronics, building materials, chemicals, 13 food and tailoring industries ; communications, such as passenger transportation; as...encourage these enterprises to develop the food , animal feed processing, construction, building materials and energy exploration industries , and help them

Electronic Publishing.

ERIC Educational Resources Information Center

Lancaster, F. W.

1989-01-01

Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

PubMed

Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

2013-01-01

To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

Basic Electricity/Electronics (Industrial Arts). Vocational Education Curriculum Guide. Bulletin 1724.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide is designed to assist industrial arts teachers, counselors, and administrators in improving instruction in the areas of electricity and basic electronics. Included in the first part of the guide are a course flow chart, a course description, a discussion of target grade levels and prerequisites, course goals and objectives,…

A Case Study: Implementing an Interactive Video Instruction System in Teaching Electronics and Industrial Maintenance.

ERIC Educational Resources Information Center

Shipe, Ron; And Others

A study examined the development and implementation of an interactive video instruction system for teaching electronics and industrial maintenance at the University of Tennessee. The specific purposes of the study were to document unusual problems that may be encountered when this new technology is implemented, suggest corrective actions, and…

Occupational Competencies Report. The Electronics, Health Service and Construction Industries as Surveyed by the Trade Associations.

ERIC Educational Resources Information Center

National Council on Vocational Education, Washington, DC.

This report presents comments from working groups in the electronics, health services, and construction industries regarding what occupational competencies are and will be needed by current and future employees. It is intended for use by state and local advisers and administrators to evaluate the relevance and quality of vocational-technical…

I-95 corridor coalition, evaluation of field operations test 8 : electronic credentialing : results of New York state motor carrier industry survey

DOT National Transportation Integrated Search

2001-05-01

The State of New York received a grant from the I-95 Corridor Coalition to develop a proof-of-concept for an electronic credentialing system for the motor carrier industry. When fully developed, the system, which is a web-based solution, will enable ...

Industrial Arts Electricity/Electronics. A Curriculum Guide for Intermediate and Secondary Level Programs. Revised Edition.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This curriculum guide is designed to assist administrators and teachers of industrial arts and vocational and technical school programs with the development of a meaningful curriculum in the area of electricity and electronics. Included in the volume are curriculum guides for the following courses: Self- and Career Awareness of Electricity and…

Business Opportunities Guide

DTIC Science & Technology

1987-01-01

Electronic Systems Division Business Opportunities Guide. We remain committed to providing industry the best information possible on pending ESD...Commander Justific ill,):, By_ D.is’ * . ’ . Dist, : :,. ELECTRONIC SYSTEMS DIVISION BUSINESS OPPORTUNITIES GUIDE The complex Command, Control...Communications (C) systems necessary for tomorrow’s Air Foice can only be developed by a stronq’ESD/industry team. Our first Business Opportunities Guide

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2010 CFR

2010-01-01

... a minimum, include the air transportation and electronics industries in the following North American... 11 Electronics Mechanic 11 Electronic Computer Mechanic 11 Television Station Mechanic 11 (d) The...

The IBA Rhodotron: an industrial high-voltage high-powered electron beam accelerator for polymers radiation processing

NASA Astrophysics Data System (ADS)

Van Lancker, Marc; Herer, Arnold; Cleland, Marshall R.; Jongen, Yves; Abs, Michel

1999-05-01

The Rhodotron is a high-voltage, high-power electron beam accelerator based on a design concept first proposed in 1989 by J. Pottier of the French Atomic Agency, Commissariat à l'Energie Atomique (CEA). In December 1991, the Belgian particle accelerator manufacturer, Ion Beam Applications s.a. (IBA) entered into an exclusive agreement with the CEA to develop and industrialize the Rhodotron. Electron beams have long been used as the preferential method to cross-link a variety of polymers, either in their bulk state or in their final form. Used extensively in the wire and cable industry to toughen insulating jackets, electron beam-treated plastics can demonstrate improved tensile and impact strength, greater abrasion resistance, increased temperature resistance and dramatically improved fire retardation. Electron beams are used to selectively cross-link or degrade a wide range of polymers in resin pellets form. Electron beams are also used for rapid curing of advanced composites, for cross-linking of floor-heating and sanitary pipes and for cross-linking of formed plastic parts. Other applications include: in-house and contract medical device sterilization, food irradiation in both electron and X-ray modes, pulp processing, electron beam doping of semi-conductors, gemstone coloration and general irradiation research. IBA currently markets three models of the Rhodotron, all capable of 10 MeV and alternate beam energies from 3 MeV upwards. The Rhodotron models TT100, TT200 and TT300 are typically specified with guaranteed beam powers of 35, 80 and 150 kW, respectively. Founded in 1986, IBA, a spin-off of the Cyclotron Research Center at the University of Louvain (UCL) in Belgium, is a pioneer in accelerator design for industrial-scale production.

A Secondary-Level Curriculum in Industrial Electronics and Robotics. Final Report.

ERIC Educational Resources Information Center

Besancon, Francis E.

A curriculum was developed to provide the electromechanical skills necessary to operate and repair industrial robots to students at the secondary and adult vocational levels. To determine requirements for entry-level positions in the robotics industry, manufacturers and employers of industrial robots were contacted. No particular entry-level…

INDUSTRIAL PROCESS PROFILES FOR ENVIRONMENTAL USE: CHAPTER 30. THE ELECTRONIC COMPONENT MANUFACTURING INDUSTRY

EPA Science Inventory

This report is one of a series constituting the catalog of Industrial Process Profiles for Environmental Use. Each industry sector is addressed as a separate chapter of the study. The catalog was developed for the purpose of compiling relevant information concerning air, water, a...

The Competitive Status of the U.S. Electronics Industry.

ERIC Educational Resources Information Center

National Academy of Engineering, Washington, DC. Committee on Technology and International Economic and Trade Issues.

This eight-chapter report is one of seven industry-specific studies conducted to identify global shifts of industrial technological capacity on a sector-by-sector basis, to relate those shifts in international competitive industrial advantage to technological and other factors, and to assess future prospects for further technological change and…

Electronic toll collection/electronic screening interoperability pilot project : final report synthesis

DOT National Transportation Integrated Search

2005-12-02

In 1998, ITS America established a Blue Ribbon Panel on electronic commerce to study the convergence of transportation and electronic payment systems. Panel members included senior managers from government, toll agencies, motor carrier industry, and ...

Materials and processing approaches for foundry-compatible transient electronics.

PubMed

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A; Song, Enming; Yu, Xinge; Rogers, John A

2017-07-11

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for "green" electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are ( i ) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, ( ii ) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and ( iii ) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries.

Materials and processing approaches for foundry-compatible transient electronics

NASA Astrophysics Data System (ADS)

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A.; Song, Enming; Yu, Xinge; Rogers, John A.

2017-07-01

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for “green” electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are (i) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, (ii) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and (iii) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries.

Predictors of Protean Career and the Moderating Role of Career Strategies among Professionals in Malaysian Electrical and Electronics (E & E) Industry

ERIC Educational Resources Information Center

Wong, Siew Chin; Mohd Rasdi, Roziah

2015-01-01

Purpose: The purpose of this paper is to examine the effects of individually related variables and the moderating role of career strategies on protean career among professionals in Malaysian Electrical & Electronics (E & E) industry. Design/methodology/approach: Research data were gathered from a sample of 306 of professional employees in…

A Value-Added Framework for Analyzing Electronic and Print Publishing.

ERIC Educational Resources Information Center

Perritt, Henry H., Jr.

1991-01-01

Discusses changes in the publishing industry resulting from digital electronic networks and optical storage technologies, and explains attributes of information products as types of value for both print and electronic contexts. Electronic products necessary for a shift from paper to electronic formats are identified, and legal issues are…

Association between Emotional Symptoms and Job Demands in an Asian Electronics Factory.

PubMed

Huang, Wei-Lieh; Guo, Yue Leon; Chen, Pau-Chung; Wang, Jui; Chu, Po-Ching

2017-09-19

Various work-related issues including mental health have been described for the electronic industry. Although East Asian countries play important roles in the electronics industry, the association between job demands and emotional symptoms has been rarely examined. The present study recruited 603 workers from either office or clean room environments in an electronics factory in Taiwan. Their personal factors, work-related factors, and emotional symptoms were assessed by a self-administered questionnaire. The symptoms of depression and hostility were reported in 24.88% and 24.38% of the subjects, respectively, while 14.93% reported both. A multivariate analysis showed that, overall, women workers were more likely to have emotional symptoms than male workers (odds ration (OR) = 1.50, 95% CI = 1.02-2.18). Among clean room workers, working under high pressure (OR = 1.84, 95% CI = 1.05-3.21), conflicting demands (OR = 2.15, 95% CI = 1.30-3.57), and social isolation at work (OR = 2.99, 95% CI = 1.23-7.30) were associated with emotional symptoms. The findings suggest that in the Asian electronics industry, for women, working under high pressure, conflicting demands, and social isolation at work are risk factors for emotional symptoms, especially for clean room workers. Further large-scale, longitudinal studies are necessary to confirm and prevent the mental health problems in this fast-evolving, highly competitive industry.

Association between Emotional Symptoms and Job Demands in an Asian Electronics Factory

PubMed Central

Huang, Wei-Lieh; Guo, Yue Leon; Chen, Pau-Chung; Wang, Jui; Chu, Po-Ching

2017-01-01

Various work-related issues including mental health have been described for the electronic industry. Although East Asian countries play important roles in the electronics industry, the association between job demands and emotional symptoms has been rarely examined. The present study recruited 603 workers from either office or clean room environments in an electronics factory in Taiwan. Their personal factors, work-related factors, and emotional symptoms were assessed by a self-administered questionnaire. The symptoms of depression and hostility were reported in 24.88% and 24.38% of the subjects, respectively, while 14.93% reported both. A multivariate analysis showed that, overall, women workers were more likely to have emotional symptoms than male workers (odds ration (OR) = 1.50, 95% CI = 1.02–2.18). Among clean room workers, working under high pressure (OR = 1.84, 95% CI = 1.05–3.21), conflicting demands (OR = 2.15, 95% CI = 1.30–3.57), and social isolation at work (OR = 2.99, 95% CI = 1.23–7.30) were associated with emotional symptoms. The findings suggest that in the Asian electronics industry, for women, working under high pressure, conflicting demands, and social isolation at work are risk factors for emotional symptoms, especially for clean room workers. Further large-scale, longitudinal studies are necessary to confirm and prevent the mental health problems in this fast-evolving, highly competitive industry. PMID:28925986

Prosperity Games prototyping with the American Electronics Association, March 8--9, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, M.; VanDevender, J.P.

1994-08-01

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the American Electronics Association in conjunction withmore » the Electronics Subcommittee of the Civilian Industrial Technology Committee of the National Science and Technology Council. Players were drawn from government, national laboratories, and universities, as well as from the electronics industry. The game explored policy changes that could enhance US competitiveness in the manufacturing of consumer electronics. Two teams simulated a presidentially appointed commission comprised of high-level representatives from government, industry, universities and national laboratories. A single team represented the foreign equivalent of this commission, formed to develop counter strategies for any changes in US policies. The deliberations and recommendations of these teams provide valuable insights as to the views of this diverse group of decision makers concerning policy changes, foreign competition, and the development, delivery and commercialization of new technologies.« less

Electronic recorder study

DOT National Transportation Integrated Search

1998-06-01

Information on the current use of electronic recorders and opinions on mandatory electronic recorder use was obtained from truck and bus fleets and owner operators through the cooperation of several trucking industry associations. Due to the low resp...

SUMMER PROGRAM FOR UPDATING THE TECHNICAL COMPETENCY OF TEACHERS OF INDUSTRIAL SUBJECTS. FINAL REPORT.

ERIC Educational Resources Information Center

BOHN, RALPH C.

STUDENTS OF THE INSERVICE PROGRAM WERE 96 INDUSTRIAL EDUCATION TEACHERS FROM THE AREAS OF AUTO AND POWER, DRAFTING, ELECTRONICS, AND METALS WHO WERE SELECTED FROM 576 APPLICANTS. OBJECTIVES WERE TO (1) DEVELOP MODELS FOR INDUSTRY-SCHOOL COOPERATIVE PROGRAMS, (2) INTEGRATE INSTRUCTION ON INDUSTRIAL MATERIALS, CYBERNETICS, AND AUTOMATION INTO THE…

Attachment 1 : appendices : electronic toll collection/electronic screening interoperability pilot project, supplement to the final report

DOT National Transportation Integrated Search

2005-07-29

In 1998, ITS America established a Blue Ribbon Panel on electronic commerce to study the convergence of transportation and electronic payment systems. Panel members included senior managers from government, toll agencies, motor carrier industry, and ...

5 MV 30 mA industrial electron processing system

NASA Astrophysics Data System (ADS)

Hoshi, Y.; Mizusawa, K.

1991-05-01

Industrial electron beam processing systems have been in use in various application fields such as: improving heat resistivity of wire insulation; controlling quality of automobile rubber tires and melt index characteristics of PE foams; and curing paintings or printing inks. Recently, there has come up a need for electron beam with an energy higher than 3 MV in order to disinfect salmonella in chicken meat, to kill bugs in fruits, and to sterilize medical disposables. To meet this need we developed a 5 MV 30 mA electron processing system with an X-ray conversion target. The machine was tested in NHV's plant in Kyoto at continuous operation of full voltage and full current. It proved to be very steady in operation with a high efficiency (as much as 72%). Also, the X-ray target was tested in a continuous run of 5 MV 30 mA (150 kW). It proved to be viable in industrial utilization. This paper introduces the process and the results of the development.

Managing the Challenges of Adopting Electronic Medical Records: An Exploratory Study of the Challenges Faced by African American Health Care Professionals

ERIC Educational Resources Information Center

Riddick, William P.

2013-01-01

The implementation of technology within the health care industry is viewed as a possible solution for lowering costs and improving health care delivery to patients. Electronic medical record system(s) (EMRS) are information technology tools viewed within the health care industry as a possible solution for aiding improvements in health care…

Advanced information society (1)

NASA Astrophysics Data System (ADS)

Ohira, Gosei

In considering the relationship of informationization and industrial structure, this paper analize some factors such as information revolution, informationization of industries and industrialization of information as background of informationization of Japanese society. Next, some information indicators such as, information coefficient of household which is a share of information related expenditure, information coefficient of industry which is a share of information related cost to total cost of production, and information transmission census developed by Ministry of Post and Telecommunication are introduced. Then new information indicator by Economic Planning Agency, that is, electronic info-communication indicator is showed. In this study, the information activities are defined to produce message or to supply services on process, stores or sale of message using electronic information equipment. International comparisons of information labor force are also presented.

40 CFR Appendix A to Part 438 - Typical Products in Metal Products and Machinery Sectors

Code of Federal Regulations, 2013 CFR

2013-07-01

... Applications Electric Lamps Electron Tubes Electronic Capacitors Electronic Coils & Transformers Electronic... Saws & Saw Blades Hardware Heating Equipment, Except Electric Industrial Furnaces & Ovens Iron & Steel.... & Inst. Elec. Lighting Fixtures Current-Carrying Wiring Devices Electirc Housewares & Fans Electric Lamps...

40 CFR Appendix A to Part 438 - Typical Products in Metal Products and Machinery Sectors

Code of Federal Regulations, 2012 CFR

2012-07-01

... Applications Electric Lamps Electron Tubes Electronic Capacitors Electronic Coils & Transformers Electronic... Saws & Saw Blades Hardware Heating Equipment, Except Electric Industrial Furnaces & Ovens Iron & Steel.... & Inst. Elec. Lighting Fixtures Current-Carrying Wiring Devices Electirc Housewares & Fans Electric Lamps...

Mechanically flexible optically transparent silicon fabric with high thermal budget devices from bulk silicon (100)

NASA Astrophysics Data System (ADS)

Hussain, Muhammad M.; Rojas, Jhonathan P.; Torres Sevilla, Galo A.

2013-05-01

Today's information age is driven by silicon based electronics. For nearly four decades semiconductor industry has perfected the fabrication process of continuingly scaled transistor - heart of modern day electronics. In future, silicon industry will be more pervasive, whose application will range from ultra-mobile computation to bio-integrated medical electronics. Emergence of flexible electronics opens up interesting opportunities to expand the horizon of electronics industry. However, silicon - industry's darling material is rigid and brittle. Therefore, we report a generic batch fabrication process to convert nearly any silicon electronics into a flexible one without compromising its (i) performance; (ii) ultra-large-scale-integration complexity to integrate billions of transistors within small areas; (iii) state-of-the-art process compatibility, (iv) advanced materials used in modern semiconductor technology; (v) the most widely used and well-studied low-cost substrate mono-crystalline bulk silicon (100). In our process, we make trenches using anisotropic reactive ion etching (RIE) in the inactive areas (in between the devices) of a silicon substrate (after the devices have been fabricated following the regular CMOS process), followed by a dielectric based spacer formation to protect the sidewall of the trench and then performing an isotropic etch to create caves in silicon. When these caves meet with each other the top portion of the silicon with the devices is ready to be peeled off from the bottom silicon substrate. Release process does not need to use any external support. Released silicon fabric (25 μm thick) is mechanically flexible (5 mm bending radius) and the trenches make it semi-transparent (transparency of 7%).

Vertical Integration: Corporate Strategy in the Information Industry.

ERIC Educational Resources Information Center

Davenport, Lizzie; Cronin, Blaise

1986-01-01

Profiles the corporate strategies of three sectors of the information industry and the trend toward consolidation in electronic publishing. Three companies' acquisitions are examined in detail using qualitative data from information industry columns and interpreting it on the basis of game theory. (EM)

Waterpipe industry products and marketing strategies: analysis of an industry trade exhibition.

PubMed

Jawad, Mohammed; Nakkash, Rima T; Hawkins, Ben; Akl, Elie A

2015-12-01

Understanding product development and marketing strategies of transnational tobacco companies (TTCs) has been of vital importance in developing an effective tobacco control policy. However, comparatively little is known of the waterpipe tobacco industry, which TTCs have recently entered. This study aimed to gain an understanding of waterpipe tobacco products and marketing strategies by visiting a waterpipe trade exhibition. In April 2014, the first author attended an international waterpipe trade exhibition, recording descriptions of products and collecting all available marketing items. We described the purpose and function of all products, and performed a thematic analysis of messages in marketing material. We classified waterpipe products into four categories and noted product variation within categories. Electronic waterpipe products (which mimic electronic cigarettes) rarely appeared on waterpipe tobacco marketing material, but were displayed just as widely. Claims of reduced harm, safety and quality were paramount on marketing materials, regardless of whether they were promoting consumption products (tobacco, tobacco substitutes), electronic waterpipes or accessories. Waterpipe products are diverse in nature and are marketed as healthy and safe products. Furthermore, the development of electronic waterpipe products appears to be closely connected with the electronic cigarette industry, rather than the waterpipe tobacco manufacturers. Tobacco control policy must evolve to take account of the vast and expanding array of waterpipe products, and potentially also charcoal products developed for waterpipe smokers. We recommend that tobacco substitutes be classified as tobacco products. Continued surveillance of the waterpipe industry is warranted. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Analytical Design of Terminally Guided Missiles.

DTIC Science & Technology

1980-01-02

Equivalent Dominant Poles and Zeros Using Industrial Specifications," Trans. on Industrial Electronics and Control Instrumentation, Vol. IECI-26, No...The relaxation of the sampling period requirement and the flexibility of our new method facilitate the practical industrial implementation and...with the Guidance and Control Directorate, U.S. Army Missile Command, Redstone Arsenal, Alabama 35809. I. INTRODUCTION Most practical industrial circuits

A Multidisciplinary PBL Approach for Teaching Industrial Informatics and Robotics in Engineering

ERIC Educational Resources Information Center

Calvo, Isidro; Cabanes, Itziar; Quesada, Jeronimo; Barambones, Oscar

2018-01-01

This paper describes the design of an industrial informatics course, following the project-based learning methodology, and reports the experience of four academic years (from 2012-13 to 2015-16). Industrial Informatics is a compulsory course taught in the third year of the B.Sc. degree in industrial electronics and automation engineering at the…

Materials and processing approaches for foundry-compatible transient electronics

PubMed Central

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A.; Song, Enming; Yu, Xinge; Rogers, John A.

2017-01-01

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for “green” electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are (i) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, (ii) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and (iii) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries. PMID:28652373

Industrial Education. Electricity/Electronics Curriculum Guide, Phase II. Instructional Modules, Level III.

ERIC Educational Resources Information Center

Lillo, Robert E.; Soffiotto, Nicholas S.

Designed for students in the tenth grade, this electricity/electronics curriculum guide contains instructional modules for sixteen units of instruction: (1) orientation, (2) introduction to electricity/electronics, (3) electricity/electronics safety, (4) fundamental skills, (5) direct current circuits, (6) graphical illustrations, (7) circuit…

Electronic Flight Bag (EFB) 2015 Industry Survey.

DOT National Transportation Integrated Search

2015-10-01

This document provides an overview of Electronic Flight Bag (EFB) hardware and software capabilities, including portable electronic devices (PEDs) used as EFBs, as of July 2015. This document updates and replaces the Volpe Centers previous EFB ind...

Arms production in Japan: The military applications of civilian technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drifte, R.

1986-01-01

The author examines both the domestic and international environments encouraging Japan's leaders not only to strengthen the country's defense, but to do so more independently. Until recently, the arms industry has been nurtured by U.S. weapons technology, but growing dependence on electronics dramatically increases Japan's contribution to modern weapons systems. The electronics revolution is creating more and more dual-purpose products, undermining the Japanese cabinet policy of prohibiting arms export. The discovery of wider applications for Japanese manufacturers' most advanced civilian technology is a strong motivation for entering the arms arena. The book illustrates that Japan's entry into the field ismore » a dynamic example of the success of Japanese industry as it enters new technological areas. The author discusses: Development and the Present Situation of Japan's Arms Production Capability; Research and Development; The Shipbuilding Industry; The Aircraft Industry; The Space and Missile Industry; and Arms Exports with conclusions.« less

5 CFR 532.313 - Private sector industries.

Code of Federal Regulations, 2010 CFR

2010-01-01

... electrical signals. 335311 Power, distribution, and specialty transformer manufacturing. 48531 Taxi service... Electronic coil, transformer, and other inductor manufacturing. 334417 Electronic connector manufacturing...

National electronic medical records integration on cloud computing system.

PubMed

Mirza, Hebah; El-Masri, Samir

2013-01-01

Few Healthcare providers have an advanced level of Electronic Medical Record (EMR) adoption. Others have a low level and most have no EMR at all. Cloud computing technology is a new emerging technology that has been used in other industry and showed a great success. Despite the great features of Cloud computing, they haven't been utilized fairly yet in healthcare industry. This study presents an innovative Healthcare Cloud Computing system for Integrating Electronic Health Record (EHR). The proposed Cloud system applies the Cloud Computing technology on EHR system, to present a comprehensive EHR integrated environment.

Modeling Single-Phase and Boiling Liquid Jet Impingement Cooling in Power Electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narumanchi, S. V. J.; Hassani, V.; Bharathan, D.

2005-12-01

Jet impingement has been an attractive cooling option in a number of industries over the past few decades. Over the past 15 years, jet impingement has been explored as a cooling option in microelectronics. Recently, interest has been expressed by the automotive industry in exploring jet impingement for cooling power electronics components. This technical report explores, from a modeling perspective, both single-phase and boiling jet impingement cooling in power electronics, primarily from a heat transfer viewpoint. The discussion is from the viewpoint of the cooling of IGBTs (insulated-gate bipolar transistors), which are found in hybrid automobile inverters.

Career Directions--Electronics Technician

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

Electronics technicians (ETs) work with electronics engineers to set up and maintain complicated electronics equipment that many of today's businesses rely on. The field is varied. An ET might service the industrial controls on a factory floor. Or repair missile control systems for the government. Or an ET could specialize in cars and trucks,…

Math for Electronics; Industrial Electronics 1: 9323.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This curriculum guide is designed for the student interested in preparing for vocational electronics and related fields of electricity, emphasizing the mathematics necessary for an indepth study of electronics. Included in the course content are goals, specific block objectives, basic algebra, powers of 10, the slide rule, basic trigonometry…

Approximate Linear Regulator and Kalman Filter

DTIC Science & Technology

1980-09-01

of Equivalent Dominant Poles and Zeros Using Industrial Specifications," IEEE Trans. on Industrial Electronics and Control Instrumentation, Vol. IECI...true. In recent years, the rapid development of powerful minicomputers and microprocessors makes the industrial applications of optimal control...1976, pp. 677-687. [21] Y. Takahashi, M. Tomizuka and D. I. Auslander, Simple discrete control of industrial processes, Trans. on ASME J. of Dynamic

Methods for recovering precious metals from industrial waste

NASA Astrophysics Data System (ADS)

Canda, L.; Heput, T.; Ardelean, E.

2016-02-01

The accelerated rate of industrialization increases the demand for precious metals, while high quality natural resources are diminished quantitatively, with significant operating costs. Precious metals recovery can be successfully made from waste, considered to be secondary sources of raw material. In recent years, concerns and interest of researchers for more increasing efficient methods to recover these metals, taking into account the more severe environmental protection legislation. Precious metals are used in a wide range of applications, both in electronic and communications equipment, spacecraft and jet aircraft engines and for mobile phones or catalytic converters. The most commonly recovered precious metals are: gold from jewellery and electronics, silver from X- ray films and photographic emulsions, industrial applications (catalysts, batteries, glass/mirrors), jewellery; platinum group metals from catalytic converters, catalysts for the refining of crude oil, industrial catalysts, nitric acid manufacturing plant, the carbon-based catalyst, e-waste. An important aspect is the economic viability of recycling processes related to complex waste flows. Hydrometallurgical and pyrometallurgical routes are the most important ways of processing electrical and electronic equipment waste. The necessity of recovering precious metals has opened new opportunities for future research.

Performance characteristics and typical industrial applications of Selfshield® electron accelerators (< 300 kV)

NASA Astrophysics Data System (ADS)

Aaronson, Judith N.; Nablo, Sam V.

1985-05-01

Selfshielded electron accelerators have been successfully used in industry for more than ten years. One of the important advantages of these machines is their compactness for easy adaptation to conventional coating and product finishing machinery. It is equally important that these machines qualify for use under "unrestricted" conditions as specified by OSHA. The shielding and product handling configurations which make this unrestricted designation possible for operating voltages under 300 kV are discussed. Thin film dosimetry techniques used for the determination of the machine performance parameters are discussed along with the rotary scanner techniques employed for the dose rate studies which are important in the application of these processors. Paper and wood coatings, which are important industrial applications involving electron initiated polymerization, are reviewed. The sterilization and disinfestation applications are also discussed. The increasing concern of these industries for the more efficient use of energy and for compliance with more stringent pollution regulations, coupled with the novel processes this energy source makes possible, assure a bright future for this developing technology.

Laser-driven electron beam and radiation sources for basic, medical and industrial sciences.

PubMed

Nakajima, Kazuhisa

2015-01-01

To date active research on laser-driven plasma-based accelerators have achieved great progress on production of high-energy, high-quality electron and photon beams in a compact scale. Such laser plasma accelerators have been envisaged bringing a wide range of applications in basic, medical and industrial sciences. Here inheriting the groundbreaker's review article on "Laser Acceleration and its future" [Toshiki Tajima, (2010)],(1)) we would like to review recent progress of producing such electron beams due to relativistic laser-plasma interactions followed by laser wakefield acceleration and lead to the scaling formulas that are useful to design laser plasma accelerators with controllability of beam energy and charge. Lastly specific examples of such laser-driven electron/photon beam sources are illustrated.

Standards for electronic imaging for graphic arts systems

NASA Astrophysics Data System (ADS)

Dunn, S. T.; Dunn, Patrice M.

1991-03-01

This paper examines the development of electronic imaging standards by and for the graphic arts industry. Taken collectively this body of work is referred to as Digital Data Exchange Standards (DDES). Because these standards are being driven by market and user requirements there are several fundamental guiding principles to their development. This paper examines these and provides an overview to the technical developments undertaken by the accredited graphic arts industry standards committees to date.

Digital Distribution of Advertising for Publications (DDAP): a graphic arts prototype of electronic intermedia publishing (EIP)

NASA Astrophysics Data System (ADS)

Dunn, Patrice M.

1998-01-01

The Digital Distribution of Advertising for Publications (DDAP) is a graphic arts industry prototype of Electronic Intermedia Publishing (EIP). EIP is a strategic, multi- industrial concept that seeks to enable the capture and input of volumes of data (i.e., both raster and object oriented data -- as well as the latter's antecedent which is vector data -- color data and black-and-white data) from a multiplicity of devices; then flowing, controlling, manipulating, modifying, storing, retrieving, transmitting, and shipping, that data through an industrial process for output to a multiplicity of output devices (e.g., ink on paper, toner on paper, bits and bytes on CD ROM, Internet, Multimedia, HDTV, etc.). As the technical requirements of the print medium are among the most rigorous in the Intermedia milieu the DDAP prototype addresses some of the most challenging issues faced in Electronic Intermedia Publishing (EIP).

Marketing Violent Entertainment to Children: A Review of Self-Regulation and Industry Practices in the Motion Picture, Music Recording & Electronic Game Industries [with] Appendices A-K. Report.

ERIC Educational Resources Information Center

Federal Trade Commission, Washington, DC.

In June of 1999, President Clinton empowered the Federal Trade Commission to study whether movie, music recording, and computer and video game industries were advertising products with violent content to youngsters. Specifically he raised two questions: Do these industries promote products they themselves acknowledge warrant parental caution in…

Interagency Testing Committee

EPA Pesticide Factsheets

The ITC's web site is a dynamic interactive vehicle that enables industry to electronically submit unpublished data and for the public (including industry) to retrieve these data and other information created or reviewed by the ITC.

[Shielding design and detection of neutrons from medical and industrial electron accelerators--simple method of design calculation for neutron shielding].

PubMed

Nakamura, T; Uwamino, Y

1986-02-01

The neutron leakage from medical and industrial electron accelerators has become an important problem and its detection and shielding is being performed in their facilities. This study provides a new simple method of design calculation for neutron shielding of those electron accelerator facilities by dividing into the following five categories; neutron dose distribution in the accelerator room, neutron attenuation through the wall and the door in the accelerator room, neutron and secondary photon dose distributions in the maze, neutron and secondary photon attenuation through the door at the end of the maze, neutron leakage outside the facility-skyshine.

47 CFR 24.237 - Interference protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... signal levels and other criteria as may be developed by the Electronics Industries Association (EIA), the Institute of Electrical and Electronics Engineers, Inc. (IEEE), the American National Standards Institute...

47 CFR 24.237 - Interference protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... signal levels and other criteria as may be developed by the Electronics Industries Association (EIA), the Institute of Electrical and Electronics Engineers, Inc. (IEEE), the American National Standards Institute...

47 CFR 24.237 - Interference protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... signal levels and other criteria as may be developed by the Electronics Industries Association (EIA), the Institute of Electrical and Electronics Engineers, Inc. (IEEE), the American National Standards Institute...

47 CFR 24.237 - Interference protection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... signal levels and other criteria as may be developed by the Electronics Industries Association (EIA), the Institute of Electrical and Electronics Engineers, Inc. (IEEE), the American National Standards Institute...

47 CFR 24.237 - Interference protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... signal levels and other criteria as may be developed by the Electronics Industries Association (EIA), the Institute of Electrical and Electronics Engineers, Inc. (IEEE), the American National Standards Institute...

Protons, Aerospace, and Electronics: A National Interest

NASA Technical Reports Server (NTRS)

Label, Kenneth A.; Turflinger, Thomas L.

2017-01-01

The aerospace and semiconductor industries lost 2000 hours annually of research access when IUCF closed. An ad hoc team between the U.S. government and industry was formed to evaluate other facility options. In this presentation, we will discuss: 1) Why aerospace, semiconductor manufacturers, and others are interested in proton facility access, as well as, 2) Some of the basics of a typical test for electronics, and 3) We'll conclude with the brief current status on progress.

Protons, Aerospace, and Electronics: A National Interest

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Turflinger, Thomas L.

2018-01-01

The aerospace and semiconductor industries lost approximately 2000 hours annually of research access when IUCF closed. An ad hoc team between the U.S. government and industry was formed to evaluate other facility options. In this presentation, we will discuss: 1) Why aerospace, semiconductor manufacturers, and others are interested in proton facility access, as well as, 2) Some of the basics of a typical tests for electronics, and 3) We'll conclude with the brief current status on progress.

Protons, Aerospace, and Electronics: A National Interest

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Turflinger, Thomas L.

2018-01-01

The aerospace and semiconductor industries lost approx. 2000 hours annually of research access when IUCF closed. An ad hoc team between the U.S. government and industry was formed to evaluate other facility options. In this presentation, we will discuss: 1) Why aerospace, semiconductor manufacturers, and others are interested in proton facility access, as well as, 2) Some of the basics of a typical test for electronics, and 3) We"ll conclude with the brief current status on progress.

Book of Knowledge (BOK) for NASA Electronic Packaging Roadmap

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2015-01-01

The objective of this document is to update the NASA roadmap on packaging technologies (initially released in 2007) and to present the current trends toward further reducing size and increasing functionality. Due to the breadth of work being performed in the area of microelectronics packaging, this report presents only a number of key packaging technologies detailed in three industry roadmaps for conventional microelectronics and a more recently introduced roadmap for organic and printed electronics applications. The topics for each category were down-selected by reviewing the 2012 reports of the International Technology Roadmap for Semiconductor (ITRS), the 2013 roadmap reports of the International Electronics Manufacturing Initiative (iNEMI), the 2013 roadmap of association connecting electronics industry (IPC), the Organic Printed Electronics Association (OE-A). The report also summarizes the results of numerous articles and websites specifically discussing the trends in microelectronics packaging technologies.

Recent progress in printed 2/3D electronic devices

NASA Astrophysics Data System (ADS)

Klug, Andreas; Patter, Paul; Popovic, Karl; Blümel, Alexander; Sax, Stefan; Lenz, Martin; Glushko, Oleksandr; Cordill, Megan J.; List-Kratochvil, Emil J. W.

2015-09-01

New, energy-saving, efficient and cost-effective processing technologies such as 2D and 3D inkjet printing (IJP) for the production and integration of intelligent components will be opening up very interesting possibilities for industrial applications of molecular materials in the near future. Beyond the use of home and office based printers, "inkjet printing technology" allows for the additive structured deposition of photonic and electronic materials on a wide variety of substrates such as textiles, plastics, wood, stone, tiles or cardboard. Great interest also exists in applying IJP in industrial manufacturing such as the manufacturing of PCBs, of solar cells, printed organic electronics and medical products. In all these cases inkjet printing is a flexible (digital), additive, selective and cost-efficient material deposition method. Due to these advantages, there is the prospect that currently used standard patterning processes can be replaced through this innovative material deposition technique. A main issue in this research area is the formulation of novel functional inks or the adaptation of commercially available inks for specific industrial applications and/or processes. In this contribution we report on the design, realization and characterization of novel active and passive inkjet printed electronic devices including circuitry and sensors based on metal nanoparticle ink formulations and the heterogeneous integration into 2/3D printed demonstrators. The main emphasis of this paper will be on how to convert scientific inkjet knowledge into industrially relevant processes and applications.

Detail of large industrial doors on north elevation; camera facing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of large industrial doors on north elevation; camera facing south. - Mare Island Naval Shipyard, Defense Electronics Equipment Operating Center, I Street, terminus west of Cedar Avenue, Vallejo, Solano County, CA

The role of gender on academic performance in STEM-related disciplines: Data from a tertiary institution.

PubMed

John, Temitope M; Badejo, Joke A; Popoola, Segun I; Omole, David O; Odukoya, Jonathan A; Ajayi, Priscilla O; Aboyade, Mary; Atayero, Aderemi A

2018-06-01

This data article presents data of academic performances of undergraduate students in Science, Technology, Engineering and Mathematics (STEM) disciplines in Covenant University, Nigeria. The data shows academic performances of Male and Female students who graduated from 2010 to 2014. The total population of samples in the observation is 3046 undergraduates mined from Biochemistry (BCH), Building technology (BLD), Computer Engineering (CEN), Chemical Engineering (CHE), Industrial Chemistry (CHM), Computer Science (CIS), Civil Engineering (CVE), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mathematics (MAT), Microbiology (MCB), Mechanical Engineering (MCE), Management and Information System (MIS), Petroleum Engineering (PET), Industrial Physics-Electronics and IT Applications (PHYE), Industrial Physics-Applied Geophysics (PHYG) and Industrial Physics-Renewable Energy (PHYR). The detailed dataset is made available in form of a Microsoft Excel spreadsheet in the supplementary material of this article.

Initiatives and outcomes of green supply chain management implementation by Chinese manufacturers.

PubMed

Zhu, Qinghua; Sarkis, Joseph; Lai, Kee-hung

2007-10-01

This paper aims to explore the green supply chain management (GSCM) initiatives (implementation) of various manufacturing industrial sectors in China and examine the links between GSCM initiatives and performance outcomes. We conducted a survey to collect data from four typical manufacturing industrial sectors in China, namely, power generating, chemical/petroleum, electrical/electronic and automobile, and received 171 valid organizational responses for data analysis. Analysis of variance (ANOVA) was used to analyze the data. The results are consistent with our prediction that the different manufacturing industry types display different levels of GSCM implementation and outcomes. We specifically found that the electrical/electronic industry has relatively higher levels of GSCM implementation and achieves better performance outcomes than the other three manufacturer types. Implications of the results are discussed and suggestions for further research on the implementation of GSCM are offered.

Electronic waste disassembly with industrial waste heat.

PubMed

Chen, Mengjun; Wang, Jianbo; Chen, Haiyian; Ogunseitan, Oladele A; Zhang, Mingxin; Zang, Hongbin; Hu, Jiukun

2013-01-01

Waste printed circuit boards (WPCBs) are resource-rich but hazardous, demanding innovative strategies for post-consumer collection, recycling, and mining for economically precious constituents. A novel technology for disassembling electronic components from WPCBs is proposed, using hot air to melt solders and to separate the components and base boards. An automatic heated-air disassembling equipment was designed to operate at a heating source temperature at a maximum of 260 °C and an inlet pressure of 0.5 MPa. A total of 13 individual WPCBs were subjected to disassembling tests at different preheat temperatures in increments of 20 °C between 80 and 160 °C, heating source temperatures ranging from 220 to 300 °C in increments of 20 °C, and incubation periods of 1, 2, 4, 6, or 8 min. For each experimental treatment, the disassembly efficiency was calculated as the ratio of electronic components released from the board to the total number of its original components. The optimal preheat temperature, heating source temperature, and incubation period to disassemble intact components were 120 °C, 260 °C, and 2 min, respectively. The disassembly rate of small surface mount components (side length ≤ 3 mm) was 40-50% lower than that of other surface mount components and pin through hole components. On the basis of these results, a reproducible and sustainable industrial ecological protocol using steam produced by industrial exhaust heat coupled to electronic-waste recycling is proposed, providing an efficient, promising, and green method for both electronic component recovery and industrial exhaust heat reutilization.

Computational Electronics and Electromagnetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeFord, J.F.

The Computational Electronics and Electromagnetics thrust area is a focal point for computer modeling activities in electronics and electromagnetics in the Electronics Engineering Department of Lawrence Livermore National Laboratory (LLNL). Traditionally, they have focused their efforts in technical areas of importance to existing and developing LLNL programs, and this continues to form the basis for much of their research. A relatively new and increasingly important emphasis for the thrust area is the formation of partnerships with industry and the application of their simulation technology and expertise to the solution of problems faced by industry. The activities of the thrust areamore » fall into three broad categories: (1) the development of theoretical and computational models of electronic and electromagnetic phenomena, (2) the development of useful and robust software tools based on these models, and (3) the application of these tools to programmatic and industrial problems. In FY-92, they worked on projects in all of the areas outlined above. The object of their work on numerical electromagnetic algorithms continues to be the improvement of time-domain algorithms for electromagnetic simulation on unstructured conforming grids. The thrust area is also investigating various technologies for conforming-grid mesh generation to simplify the application of their advanced field solvers to design problems involving complicated geometries. They are developing a major code suite based on the three-dimensional (3-D), conforming-grid, time-domain code DSI3D. They continue to maintain and distribute the 3-D, finite-difference time-domain (FDTD) code TSAR, which is installed at several dozen university, government, and industry sites.« less

The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry. Supplement to the President’s 2011 Budget

DTIC Science & Technology

2010-02-01

commercial “ pull ” to enable rapid establishment of domestic 21st century manufacturing and to rapidly reduce product cost. CNT electronics...Opportunities for Academic Liaison with Industry ( GOALI ), Partnerships for Innovation (PFI) , and Industry-University Cooperative Research Centers (IUCRC

Laser-driven electron beam and radiation sources for basic, medical and industrial sciences

PubMed Central

NAKAJIMA, Kazuhisa

2015-01-01

To date active research on laser-driven plasma-based accelerators have achieved great progress on production of high-energy, high-quality electron and photon beams in a compact scale. Such laser plasma accelerators have been envisaged bringing a wide range of applications in basic, medical and industrial sciences. Here inheriting the groundbreaker’s review article on “Laser Acceleration and its future” [Toshiki Tajima, (2010)],1) we would like to review recent progress of producing such electron beams due to relativistic laser-plasma interactions followed by laser wakefield acceleration and lead to the scaling formulas that are useful to design laser plasma accelerators with controllability of beam energy and charge. Lastly specific examples of such laser-driven electron/photon beam sources are illustrated. PMID:26062737

Use of electronic health records can improve the health care industry's environmental footprint.

PubMed

Turley, Marianne; Porter, Catherine; Garrido, Terhilda; Gerwig, Kathy; Young, Scott; Radler, Linda; Shaber, Ruth

2011-05-01

Electronic health records have the potential to improve the environmental footprint of the health care industry. We estimate that Kaiser Permanente's electronic health record system, which covers 8.7 million beneficiaries, eliminated 1,000 tons of paper records and 68 tons of x-ray film, and that it has lowered gasoline consumption among patients who otherwise would have made trips to the doctor by at least three million gallons per year. However, the use of personal computers resulted in higher energy consumption and generated an additional 250 tons of waste. We conclude that electronic health records have a positive net effect on the environment, and that our model for evaluating their impact can be used to determine whether their use can improve communities' health.

Summary of workshop 'Theory Meets Industry'—the impact of ab initio solid state calculations on industrial materials research

NASA Astrophysics Data System (ADS)

Wimmer, E.

2008-02-01

A workshop, 'Theory Meets Industry', was held on 12-14 June 2007 in Vienna, Austria, attended by a well balanced number of academic and industrial scientists from America, Europe, and Japan. The focus was on advances in ab initio solid state calculations and their practical use in industry. The theoretical papers addressed three dominant themes, namely (i) more accurate total energies and electronic excitations, (ii) more complex systems, and (iii) more diverse and accurate materials properties. Hybrid functionals give some improvements in energies, but encounter difficulties for metallic systems. Quantum Monte Carlo methods are progressing, but no clear breakthrough is on the horizon. Progress in order-N methods is steady, as is the case for efficient methods for exploring complex energy hypersurfaces and large numbers of structural configurations. The industrial applications were dominated by materials issues in energy conversion systems, the quest for hydrogen storage materials, improvements of electronic and optical properties of microelectronic and display materials, and the simulation of reactions on heterogeneous catalysts. The workshop is a clear testimony that ab initio computations have become an industrial practice with increasingly recognized impact.

A BSc level option in biomedical electronics.

PubMed

Gergely, S

1979-01-01

1. The application of electronic instruments in medical diagnosis and therapy is well established. 2. There is a demand for electronic engineers both in industry and in the Health Service at all ranges of educational attainment. 3. It is possible to identify a set of objectives for a first degree course in Biomedical Electronics. An important element of this course should be the provision of practical experience in industry and in hospitals. 4. Such courses are available both in Europe and in the United States. Although the postgraduate course provision was satisfactory in the UK in the early seventies, only one full time undergraduate course was in operation. 5. A sandwich course can be designed in Biomedical Electronics as a major option of an existing BSc course in Electrical and Electronic Engineering. Provision can be made for entering and leaving the option. The option can be arranged to follow the guidelines laid down by the IEE for exemption from its educational requirements. 6. The option described started at the Lanchester Polytechnic in Coventry in September 1977.

[The innovative dynamic of the mechanics, electronics and materials subsystem].

PubMed

Maldonado, José; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira; Vargas, Marco

2012-12-01

The mechanics, electronics and materials subsystem, one of the subsystems of the health care productive complex, encompasses different activities, usually clustered in what is called the medical, hospital and dental equipment and materials industry. This is a strategic area for health care, since it represents a continuous source of changes in care practices, and influences the provision of health care services. It has, moreover, potential for promoting the progress of Brazil's system of innovation and for increasing the competitiveness of the industry as a whole, given that it articulates future technologies. Despite the significant growth of this industry in Brazil in recent years, such equipment and materials have been presenting a growing deficit in the balance of trade. This incompatibility between national health care needs and the productive and innovative basis of the industry points to structural fragilities in the system. Using the framework of political economy, the article aims to discuss the development of this industry in Brazil and its challenges.

Interactive Courseware Standards

DTIC Science & Technology

1992-07-01

music industry standard provides data formats and transmission specifications for musical notation. Joint Photographic Experts Group (JPEG). This...has been used in the music industry for several years, especially for electronically programmable keyboards and 16 instruments. The video compression

Engineering Technology Education: Bibliography, 1988.

ERIC Educational Resources Information Center

Dyrud, Marilyn A.

1989-01-01

Lists articles and books related to engineering technology education published in 1988. Items are grouped administration, aeronautical, architectural, CAD/CAM, civil, computers, curriculum, electrical/electronics, industrial, industry/government/employers, instructional technology, laboratories, lasers, liberal studies, manufacturing, mechanical,…

Engineering Technology Education: Bibliography 1989.

ERIC Educational Resources Information Center

Dyrud, Marilyn A., Comp.

1990-01-01

Over 200 references divided into 24 different areas are presented. Topics include administration, aeronautics, architecture, biomedical technology, CAD/CAM, civil engineering, computers, curriculum, electrical/electronics engineering, industrial engineering, industry and employment, instructional technology, laboratories, lasers, liberal studies,…

Interagency Testing Committee (ITC) Reports

EPA Pesticide Factsheets

The ITC's web site is a interactive vehicle that provides procedures for industry to electronically submit unpublished data and for the public (including industry) to retrieve these data and other information created or reviewed by the ITC.

Reference Points: Engineering Technology Education Bibliography, 1987.

ERIC Educational Resources Information Center

Engineering Education, 1989

1989-01-01

Lists articles and books published in 1987. Selects the following headings: administration, aeronautical, architectural, CAD/CAM, civil, computers, curriculum, electrical/electronics, industrial, industry/government/employers, instructional technology, laboratories, liberal studies, manufacturing, mechanical, minorities, research, robotics,…

Implementing Electronic Data Interchange (EDI) with Small Business Suppliers in the Pre-Award Acquisition Process

DTIC Science & Technology

1993-06-01

initiative " Electronic Commerce through EDI." Consistent with the DoD initiative to implement EDI with industry, participation of small businesses in the pre...paperwork associated with the pre-award acquisition process, electronic commerce is being integrated with EDI through electronic bulletin boards...This thesis will explore the issues surrounding DoD’s successfully implementing the use of Electronic Commerce / Electronic Data Interchange (EC/EDI

Diamondoid monolayers as electron emitters

DOEpatents

Yang, Wanli [El Cerrito, CA; Fabbri, Jason D [San Francisco, CA; Melosh, Nicholas A [Menlo Park, CA; Hussain, Zahid [Orinda, CA; Shen, Zhi-Xun [Stanford, CA

2012-04-10

Provided are electron emitters based upon diamondoid monolayers, preferably self-assembled higher diamondoid monolayers. High intensity electron emission has been demonstrated employing such diamondoid monolayers, particularly when the monolayers are comprised of higher diamondoids. The application of such diamondoid monolayers can alter the band structure of substrates, as well as emit monochromatic electrons, and the high intensity electron emissions can also greatly improve the efficiency of field-effect electron emitters as applied to industrial and commercial applications.

Diamondoid monolayers as electron emitters

DOEpatents

Yang, Wanli; Fabbri, Jason D.; Melosh, Nicholas A.; Hussain, Zahid; Shen, Zhi-Xun

2013-10-29

Provided are electron emitters based upon diamondoid monolayers, preferably self-assembled higher diamondoid monolayers. High intensity electron emission has been demonstrated employing such diamondoid monolayers, particularly when the monolayers are comprised of higher diamondoids. The application of such diamondoid monolayers can alter the band structure of substrates, as well as emit monochromatic electrons, and the high intensity electron emissions can also greatly improve the efficiency of field-effect electron emitters as applied to industrial and commercial applications.

32 CFR Appendix A to Part 1285 - Gaining Access to DLA Records

Code of Federal Regulations, 2010 CFR

2010-07-01

..., medical, chemical, petroleum, industrial, construction, electronics, and general items of supply. The six... aircraft, surface ships, submarines, combat vehicles, and missile systems. b. Defense Electronics Supply... Center, Attn: DCSC-WXA, 3990 E. Broad Street, Columbus, OH 43216-5000. Defense Electronics Supply Center...

75 FR 27256 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... cable operators and the consumer electronics industry to establish the technical details of the... Cable and Telecommunications Association and the Consumer Electronics Association had agreed in a...

Electronics Worksite Training Project. Final Report.

ERIC Educational Resources Information Center

Hata, David M.; Morris, Richard D.

The Oregon Electronics Worksite Training Program created a system for delivering vocational education and training to individuals employed within the electronics and manufacturing industry in the Portland metropolitan area. The approach selected by Portland Community College was to use interactive video instructional materials in a self-study,…

Electronic Communication in Engineering Work.

ERIC Educational Resources Information Center

Bishop, Ann P.

1992-01-01

Discusses the role of electronic networks in engineering work; reviews selected literature on engineering work, knowledge, and communication; describes current uses of electronic networks; and presents results from a study of the use of networks by engineers in the aerospace industry, including their perceptions of networks. (67 references) (LRW)

What the Internet means for the medical device industry.

PubMed

Frank, T

2000-12-01

The Internet is dramatically changing the structure of the industry. For the first time, direct communication between all suppliers and all hospitals is available. The Internet-based electronic market place not only provides the ability to choose products from a standardized catalogue, but also to send orders direct to suppliers' enterprise resource planning systems. One-to-one marketing is also becoming a reality. Medical device manufacturers are advised to test the different electronic sales and marketing initiatives that are now available.

Brief history of electronic stereoscopic displays

NASA Astrophysics Data System (ADS)

Lipton, Lenny

2012-02-01

A brief history of recent developments in electronic stereoscopic displays is given concentrating on products that have succeeded in the market place and hence have had a significant influence on future implementations. The concentration is on plano-stereoscopic (two-view) technology because it is now the dominant display modality in the marketplace. Stereoscopic displays were created for the motion picture industry a century ago, and this technology influenced the development of products for science and industry, which in turn influenced product development for entertainment.

ATCA for Machines-- Advanced Telecommunications Computing Architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, R.S.; /SLAC

2008-04-22

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R&D including application of HA principles to power electronics systems.

Digital diffractive optics: Have diffractive optics entered mainstream industry yet?

NASA Astrophysics Data System (ADS)

Kress, Bernard; Hejmadi, Vic

2010-05-01

When a new technology is integrated into industry commodity products and consumer electronic devices, and sold worldwide in retail stores, it is usually understood that this technology has then entered the realm of mainstream technology and therefore mainstream industry. Such a leap however does not come cheap, as it has a double edge sword effect: first it becomes democratized and thus massively developed by numerous companies for various applications, but also it becomes a commodity, and thus gets under tremendous pressure to cut down its production and integration costs while not sacrificing to performance. We will show, based on numerous examples extracted from recent industry history, that the field of Diffractive Optics is about to undergo such a major transformation. Such a move has many impacts on all facets of digital diffractive optics technology, from the optical design houses to the micro-optics foundries (for both mastering and volume replication), to the final product integrators or contract manufacturers. The main causes of such a transformation are, as they have been for many other technologies in industry, successive technological bubbles which have carried and lifted up diffractive optics technology within the last decades. These various technological bubbles have been triggered either by real industry needs or by virtual investment hype. Both of these causes will be discussed in the paper. The adjective ""digital"" in "digital diffractive optics" does not refer only, as it is done in digital electronics, to the digital functionality of the element (digital signal processing), but rather to the digital way they are designed (by a digital computer) and fabricated (as wafer level optics using digital masking techniques). However, we can still trace a very strong similarity between the emergence of micro-electronics from analog electronics half a century ago, and the emergence of digital optics from conventional optics today.

75 FR 14445 - Guidance for Industry on Submitting a Report for Multiple Facilities to the Reportable Food...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-D-0260] Guidance for Industry on Submitting a Report for Multiple Facilities to the Reportable Food Electronic... Act of 2007.'' The document provides guidance to the industry in complying with the Reportable Food...

Industrial Arts 7-9. Power/Energy: Electricity/Electronics, Power Mechanics, Power/Energy.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg.

This guide for industrial arts grades 7-9 provides teachers with a curriculum for the subject cluster of power/energy. An "Overview" section presents the rationale, discusses how the content of the program is related to the developmental stages of the adolescent, describes the structure of the industrial arts program, and lists program goals and…

What Do Universities Really Owe Industry? The Case of Solid State Electronics at Stanford

ERIC Educational Resources Information Center

Lecuyer, Christophe

2005-01-01

It is widely argued that, in the United States, the Department of Defense dictated the intellectual contours of academic science and engineering during the Cold War. However, in important ways, American science was also deeply influenced by industry. Between 1955 and 1985, Stanford University embraced three waves of industrial innovation in solid…

Engineering Technology Education Bibliography, 1990.

ERIC Educational Resources Information Center

Dyrud, Marilyn A.

1991-01-01

Lists over 340 materials published in 1990 related to engineering technology education and grouped under the following headings: administration; architectural; computer-assisted design/management (CAD/CAM); civil; computers; curriculum; electrical/electronics; industrial; industry/government/employers; instructional technology; laboratories;…

Industrial Education Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This handbook contains a competency-based curriculum for teaching industrial education in Alaska. Competencies are listed for the following areas: employability, auto maintenance, building maintenance, commercial fishing, communications, construction, drafting, electronics, energy and power, forestry and logging, graphics, high technology,…

Cyclical Behavior of Productivity in the Machine Tool Industry.

ERIC Educational Resources Information Center

Duke, John; Brand, Horst

1981-01-01

Productivity growth was slow during 1958-80, partly because of the industry's tendency to retain skilled workers during cyclical downturns; computers and other electronic equipment aided production, but diffusion of such innovations has been slow. (Author)

Using Consumer Electronics and Apps in Industrial Environments - Development of a Framework for Dynamic Feature Deployment and Extension by Using Apps on Field Devices

NASA Astrophysics Data System (ADS)

Schmitt, Mathias

2014-12-01

The aim of this paper is to give a preliminary insight regarding the current work in the field of mobile interaction in industrial environments by using established interaction technologies and metaphors from the consumer goods industry. The major objective is the development and implementation of a holistic app-framework, which enables dynamic feature deployment and extension by using mobile apps on industrial field devices. As a result, field device functionalities can be updated and adapted effectively in accordance with well-known appconcepts from consumer electronics to comply with the urgent requirements of more flexible and changeable factory systems of the future. In addition, a much more user-friendly and utilizable interaction with field devices can be realized. Proprietary software solutions and device-stationary user interfaces can be overcome and replaced by uniform, cross-vendor solutions

The Future of Product Design Utilising Printed Electronics

ERIC Educational Resources Information Center

York, Nicola; Southee, Darren; Evans, Mark

2017-01-01

This paper addresses the teaching of emerging technologies to design students, using "printed electronics" as an example as it recently became viable to mass manufacture and is ready for use in designs. Printed electronics is introduced as a disruptive technology, and approaches employed in knowledge transfer to industrial/product…

Electronic Media: A Motif for Shared Resources.

ERIC Educational Resources Information Center

Lightner, Stanley L.; Johnson, W. C.

2000-01-01

A survey of trade and industrial education supervisors from 10 states determined the degree of use of electronic education methods. Instructors in these states used presentation software and web-based exercises most often; fewer used video, CD-ROM, and distance technologies; 70% had been taught electronic presentation methods in preservice or…

Creating New Pricing Models for Electronic Publishing.

ERIC Educational Resources Information Center

Boelio, David B.; Knight, Nancy H.

Establishing pricing policies for electronic publishing that are fair and flexible is of vital importance to the information industry. The pricing of most information available electronically is far less efficient and market-sensitive than it could be. Some of the new approaches to pricing, emphasizing a usage-based metric providing qualitative…

Sustainable Electronic Roadmap and Forum Summary; Sustainable Electronics Forum, October 15-18, 2012, Racine, WI

EPA Science Inventory

The Roadmap presents critical issues and research questions for each theme. For Theme 1, the issues for limiting the harm from materials and process in electronics industry include identifying the chemicals in products, production process, in the extraction of virgin materials, i...

76 FR 72087 - Special Conditions: Diamond Aircraft Industries, Model DA-40NG; Electronic Engine Control (EEC...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... engine design certification, and the certification requirements for engine control systems are driven by... following novel or unusual design features: Electronic engine control system. Discussion As discussed above...; Electronic Engine Control (EEC) System AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final...

Consumer Cost Differences for Traditional and Internet Markets.

ERIC Educational Resources Information Center

Shaw, Michael J.; Strader, Troy J.

1999-01-01

Addresses research issues related to the economics of electronic, Internet-based markets. Discusses consumer cost-based differences for traditional and electronic markets; revenue implications for sellers and transaction intermediaries; and results of an empirical, survey-based study of an electronic market in the sports trading-card industry.…

Advanced Electronics Systems 1, Industrial Electronics 3: 9327.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The 135 clock-hour course for the 12th year consists of outlines for blocks of instruction on transistor applications to basic circuits, principles of single sideband communications, maintenance practices, preparation for FCC licenses, application of circuits to advanced electronic systems, nonsinusoidal wave shapes, multivibrators, and blocking…

78 FR 310 - Draft Revision of Guidance for Industry on Providing Regulatory Submissions in Electronic Format...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-03

...ApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http://www.regulations.../Drugs/DevelopmentApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http...), in a format that FDA can process, review, and archive. Currently, the Agency can process, review, and...

Teaching biomedical design through a university-industry partnership.

PubMed

Khuon, Lunal; Zum, Karl R; Zurn, Jane B; Herrera, Gerald M

2016-08-01

This paper describes a course that, as a result of a university-industry partnership, emphasizes bringing industry experts into the classroom to teach biomedical design. Full-time faculty and industry engineers and entrepreneurs teach the senior technical elective course, Biomedical System Design. This hands-on senior course in biomedical system design places varied but connected emphasis on understanding the biological signal source, electronics design, safety, patient use, medical device qualifications, and good manufacturing practices.

Radiation-Hardened Electronics for the Space Environment

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Watson, Michael D.

2007-01-01

RHESE covers a broad range of technology areas and products. - Radiation Hardened Electronics - High Performance Processing - Reconfigurable Computing - Radiation Environmental Effects Modeling - Low Temperature Radiation Hardened Electronics. RHESE has aligned with currently defined customer needs. RHESE is leveraging/advancing SOA space electronics, not duplicating. - Awareness of radiation-related activities through out government and industry allow advancement rather than duplication of capabilities.

The Electronic Freight Management Initiative

DOT National Transportation Integrated Search

2006-04-01

This report discusses the Electronic Freight Management initiative, a U.S. Department of Transportation (DOT) sponsored research effort that partners with industry to improve the operating efficiencies, safety, and security of goods movement. The EFM...

Electrical and electronic devices and components: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

Components and techniques which may be useful in the electronics industry are described. Topics discussed include transducer technology, printed-circuit technology, solid state devices, MOS transistors, Gunn device, microwave antennas, and position indicators.

Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

PubMed Central

Wilson, Alphus D.

2013-01-01

Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems. PMID:23396191

Diverse applications of electronic-nose technologies in agriculture and forestry.

PubMed

Wilson, Alphus D

2013-02-08

Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

Digital Audio Radio Broadcast Systems Laboratory Testing Nearly Complete

NASA Technical Reports Server (NTRS)

2005-01-01

Radio history continues to be made at the NASA Lewis Research Center with the completion of phase one of the digital audio radio (DAR) testing conducted by the Consumer Electronics Group of the Electronic Industries Association. This satellite, satellite/terrestrial, and terrestrial digital technology will open up new audio broadcasting opportunities both domestically and worldwide. It will significantly improve the current quality of amplitude-modulated/frequency-modulated (AM/FM) radio with a new digitally modulated radio signal and will introduce true compact-disc-quality (CD-quality) sound for the first time. Lewis is hosting the laboratory testing of seven proposed digital audio radio systems and modes. Two of the proposed systems operate in two modes each, making a total of nine systems being tested. The nine systems are divided into the following types of transmission: in-band on-channel (IBOC), in-band adjacent-channel (IBAC), and new bands. The laboratory testing was conducted by the Consumer Electronics Group of the Electronic Industries Association. Subjective assessments of the audio recordings for each of the nine systems was conducted by the Communications Research Center in Ottawa, Canada, under contract to the Electronic Industries Association. The Communications Research Center has the only CCIR-qualified (Consultative Committee for International Radio) audio testing facility in North America. The main goals of the U.S. testing process are to (1) provide technical data to the Federal Communication Commission (FCC) so that it can establish a standard for digital audio receivers and transmitters and (2) provide the receiver and transmitter industries with the proper standards upon which to build their equipment. In addition, the data will be forwarded to the International Telecommunications Union to help in the establishment of international standards for digital audio receivers and transmitters, thus allowing U.S. manufacturers to compete in the world market.

Direction of CRT waste glass processing: electronics recycling industry communication.

PubMed

Mueller, Julia R; Boehm, Michael W; Drummond, Charles

2012-08-01

Cathode Ray Tube, CRT, waste glass recycling has plagued glass manufacturers, electronics recyclers and electronics waste policy makers for decades because the total supply of waste glass exceeds demand, and the formulations of CRT glass are ill suited for most reuse options. The solutions are to separate the undesirable components (e.g. lead oxide) in the waste and create demand for new products. Achieving this is no simple feat, however, as there are many obstacles: limited knowledge of waste glass composition; limited automation in the recycling process; transportation of recycled material; and a weak and underdeveloped market. Thus one of the main goals of this paper is to advise electronic glass recyclers on how to best manage a diverse supply of glass waste and successfully market to end users. Further, this paper offers future directions for academic and industry research. To develop the recommendations offered here, a combination of approaches were used: (1) a thorough study of historic trends in CRT glass chemistry; (2) bulk glass collection and analysis of cullet from a large-scale glass recycler; (3) conversations with industry members and a review of potential applications; and (4) evaluation of the economic viability of specific uses for recycled CRT glass. If academia and industry can solve these problems (for example by creating a database of composition organized by manufacturer and glass source) then the reuse of CRT glass can be increased. Copyright © 2012 Elsevier Ltd. All rights reserved.

International Seminar on Laser and Opto-Electronic Technology in Industry: State-of-the-Art Review, Xiamen, People's Republic of China, June 25-28, 1986, Proceedings

NASA Astrophysics Data System (ADS)

Ke, Jingtang; Pryputniewicz, Ryszard J.

Various papers on the state of the art in laser and optoelectronic technology in industry are presented. Individual topics addressed include: wavelength compensation for holographic optical element, optoelectronic techniques for measurement and inspection, new optical measurement methods in Western Europe, applications of coherent optics at ISL, imaging techniques for gas turbine development, the Rolls-Royce experience with industrial holography, panoramic holocamera for tube and borehole inspection, optical characterization of electronic materials, optical strain measurement of rotating components, quantitative interpretation of holograms and specklegrams, laser speckle technique for hydraulic structural model test, study of holospeckle interferometry, common path shearing fringe scanning interferometer, and laser interferometry applied to nondestructive testing of tires.

The Information Revolution.

ERIC Educational Resources Information Center

Gilder, George

1993-01-01

A technological revolution is erupting all about us. A millionfold rise in computation and communications cost effectiveness will transform all industries and bureaucracies. The information revolution is a decentralizing, microcosmic electronic force opposing the centralizing, controlling Industrial-Age mentality persisting in schools. Television…

Annual Review of Database Developments: 1993.

ERIC Educational Resources Information Center

Basch, Reva

1993-01-01

Reviews developments in the database industry for 1993. Topics addressed include scientific and technical information; environmental issues; social sciences; legal information; business and marketing; news services; documentation; databases and document delivery; electronic bulletin boards and the Internet; and information industry organizational…

Technology review for electronically controlled braking systems

DOT National Transportation Integrated Search

1998-09-22

Electronically Controlled Braking Systems (ECBS) offer many potential benefits to the trucking industry in the areas of safety, reliability, enhanced driver feedback, and maintainability. ECBS are being tested by a number of manufacturers. These syst...

The IBA Easy-E-Beam™ Integrated Processing System

NASA Astrophysics Data System (ADS)

Cleland, Marshall R.; Galloway, Richard A.; Lisanti, Thomas F.

2011-06-01

IBA Industrial Inc., (formerly known as Radiation Dynamics, Inc.) has been making high-energy and medium-energy, direct-current proton and electron accelerators for research and industrial applications for many years. Some industrial applications of high-power electron accelerators are the crosslinking of polymeric materials and products, such as the insulation on electrical wires, multi-conductor cable jackets, heat-shrinkable plastic tubing and film, plastic pipe, foam and pellets, the partial curing of rubber sheet for automobile tire components, and the sterilization of disposable medical devices. The curing (polymerization and crosslinking) of carbon and glass fiber-reinforced composite plastic parts, the preservation of foods and the treatment of waste materials are attractive possibilities for future applications. With electron energies above 1.0 MeV, the radiation protection for operating personnel is usually provided by surrounding the accelerator facility with thick concrete walls. With lower energies, steel and lead panels can be used, which are substantially thinner and more compact than the equivalent concrete walls. IBA has developed a series of electron processing systems called Easy-e-Beam™ for the medium energy range from 300 keV to 1000 keV. These systems include the shielding as an integral part of a complete radiation processing facility. The basic concepts of the electron accelerator, the product processing equipment, the programmable control system, the configuration of the radiation shielding and some performance characteristics are described in this paper.

Aircraft, Missile, and Spacecraft; Office Machine and Computer; Electronics; and Motor Vehicle and Equipment Manufacturing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in various manufacturing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in…

Assessment of Phospohrene Field Effect Transistors

DTIC Science & Technology

2018-01-28

electronics industry. To this end, transistor test structures would initially be fabricated on phosphorene exfoliated from black phosphorus and, later, on...34Phosphorene FETs-Promising Transistors Based on a few Layers of Phosphorus Atoms," Nanjing Electronic Devices Institute, Nanjing, China, Jul. 2015...OH, Nov. 2015. J.C. M. Hwang, "Phosphorene Transistors-Transient or Lasting Electronics ?" Workshop Frontier Electronics , San Juan, PR, Dec. 2015

Analyzing the environmental impacts of laptop enclosures using screening-level life cycle assessment to support sustainable consumer electronics (j/a)

EPA Science Inventory

The market growth of consumer electronics makes it essential for industries and policy-makers to work together to develop sustainable products. The objective of this study is to better understand how to promote environmentally sustainable consumer electronics by examining the use...

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

by Google and the IEEE Power Electronics Society brought their inverters to NREL's Energy Systems , and others in the power electronics industry. NREL researchers have collaborated with Google and IEEE Power Electronics On October 8, the U.S. Department of Energy (DOE) announced the two universities

78 FR 32668 - Draft Guidance for Industry: Changes to an Approved Application: Biological Products: Human Blood...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

..., including Source Plasma, with recommendations intended to assist with determining which reporting mechanism... final version of the guidance, submit either electronic or written comments on the draft guidance by... INFORMATION section for electronic access to the draft guidance document. Submit electronic comments on the...

Mandatory Use of Electronic Health Records: Overcoming Physician Resistance

ERIC Educational Resources Information Center

Brown, Viseeta K.

2012-01-01

Literature supports the idea that electronic health records hold tremendous value for the healthcare system in that it increases patient safety, improves the quality of care and provides greater efficiency. The move toward mandatory implementation of electronic health records is a growing concern in the United States health care industry. The…

Scalable Sub-micron Patterning of Organic Materials Toward High Density Soft Electronics.

PubMed

Kim, Jaekyun; Kim, Myung-Gil; Kim, Jaehyun; Jo, Sangho; Kang, Jingu; Jo, Jeong-Wan; Lee, Woobin; Hwang, Chahwan; Moon, Juhyuk; Yang, Lin; Kim, Yun-Hi; Noh, Yong-Young; Jaung, Jae Yun; Kim, Yong-Hoon; Park, Sung Kyu

2015-09-28

The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. In this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. The successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.

Scalable Sub-micron Patterning of Organic Materials Toward High Density Soft Electronics

NASA Astrophysics Data System (ADS)

Kim, Jaekyun; Kim, Myung-Gil; Kim, Jaehyun; Jo, Sangho; Kang, Jingu; Jo, Jeong-Wan; Lee, Woobin; Hwang, Chahwan; Moon, Juhyuk; Yang, Lin; Kim, Yun-Hi; Noh, Yong-Young; Yun Jaung, Jae; Kim, Yong-Hoon; Kyu Park, Sung

2015-09-01

The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. In this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. The successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.

MERCURY USAGE AND ALTERNATIVES IN THE ELECTRICAL AND ELECTRONICS INDUSTRIES

EPA Science Inventory

Many industries have already found alternatives for mercury or have greatly decreased mercury use. However, the unique electromechanical and photoelectric properties of mercury and mercury compounds have made replacement of mercury difficult in some applications. This study was i...

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1985-01-01

Recent economic growth and improved manufacturing profitability are supporting increased employment for industrial engineers. Promising areas include modernizing manufacturing technology and productivity with large amounts of hiring in aerospace, electronics, and instrumentation. Percentages of women employed in these fields for 1982 and 1983 are…

An innovative application of extended exergy analysis into an industrial park.

PubMed

Fan, Yupeng; Qiao, Qi; Fang, Lin

2017-04-01

Exergy is a thermodynamic term used to account all possible useful work theoretically throughout one process when it is brought into equilibrium with its environment. It however cannot directly incorporate non-physical flows, which can be accounted by extensions of the exergy consumption method. Extended exergy, which builds a bridge between thermal and anthropic dimensions, can both measure resource consumption and economic system. In this study, we applied extended exergy analysis to analyze an industrial park, including material consumption, social investment, and environmental influence. The total extended exergy consumption in the study park amounts to 2.52 EJ. The material-based exergy occupies the largest exergy consumption, followed by capital exergy, environmental remediation exergy, and labor exergy in decreasing order. The exergy capacity was proposed to depict the conversion ability from exergy consumption into economic benefits. In the study area, electronic information industry has the largest exergy capacity with a value of 70 RMB/GJ, indicating a high conversion power from exergy to money. New energy vehicles and parts manufacturing occupies bottom rung in terms of exergy capacity. From the view of material consumption, other industry consumed a lot more exergy compared to electronic information industry; for the environmental remediation, other industry has the lowest exergy capacity, indicating it discharged more pollutants than other clusters to output the same amount of money. Therefore, other industry needs to be urgently transformed and upgraded. The study could help to optimize industrial structure and environmental management in industrial parks.

Interactive Voice/Web Response System in clinical research

PubMed Central

Ruikar, Vrishabhsagar

2016-01-01

Emerging technologies in computer and telecommunication industry has eased the access to computer through telephone. An Interactive Voice/Web Response System (IxRS) is one of the user friendly systems for end users, with complex and tailored programs at its backend. The backend programs are specially tailored for easy understanding of users. Clinical research industry has experienced revolution in methodologies of data capture with time. Different systems have evolved toward emerging modern technologies and tools in couple of decades from past, for example, Electronic Data Capture, IxRS, electronic patient reported outcomes, etc. PMID:26952178

Electronic wastes

NASA Astrophysics Data System (ADS)

Regel-Rosocka, Magdalena

2018-03-01

E-waste amount is growing at about 4% annually, and has become the fastest growing waste stream in the industrialized world. Over 50 million tons of e-waste are produced globally each year, and some of them end up in landfills causing danger of toxic chemicals leakage over time. E-waste is also sent to developing countries where informal processing of waste electrical and electronic equipment (WEEE) causes serious health and pollution problems. A huge interest in recovery of valuable metals from WEEE is clearly visible in a great number of scientific, popular scientific publications or government and industrial reports.

Electron tubes for industrial applications

NASA Astrophysics Data System (ADS)

Gellert, Bernd

1994-05-01

This report reviews research and development efforts within the last years for vacuum electron tubes, in particular power grid tubes for industrial applications. Physical and chemical effects are discussed that determine the performance of todays devices. Due to the progress made in the fundamental understanding of materials and newly developed processes the reliability and reproducibility of power grid tubes could be improved considerably. Modern computer controlled manufacturing methods ensure a high reproducibility of production and continuous quality certification according to ISO 9001 guarantees future high quality standards. Some typical applications of these tubes are given as an example.

Thermal Management and Reliability of Automotive Power Electronics and Electric Machines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narumanchi, Sreekant V; Bennion, Kevin S; Cousineau, Justine E

Low-cost, high-performance thermal management technologies are helping meet aggressive power density, specific power, cost, and reliability targets for power electronics and electric machines. The National Renewable Energy Laboratory is working closely with numerous industry and research partners to help influence development of components that meet aggressive performance and cost targets through development and characterization of cooling technologies, and thermal characterization and improvements of passive stack materials and interfaces. Thermomechanical reliability and lifetime estimation models are important enablers for industry in cost-and time-effective design.

Interactive Voice/Web Response System in clinical research.

PubMed

Ruikar, Vrishabhsagar

2016-01-01

Emerging technologies in computer and telecommunication industry has eased the access to computer through telephone. An Interactive Voice/Web Response System (IxRS) is one of the user friendly systems for end users, with complex and tailored programs at its backend. The backend programs are specially tailored for easy understanding of users. Clinical research industry has experienced revolution in methodologies of data capture with time. Different systems have evolved toward emerging modern technologies and tools in couple of decades from past, for example, Electronic Data Capture, IxRS, electronic patient reported outcomes, etc.

Well Monitoring System For EGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Normann, Randy; Glowka, Dave; Normann, Charles

This grant is a collection of projects designed to move aircraft high temperature electronics technology into the geothermal industry. Randy Normann is the lead. He licensed the HT83SNL00 chip from Sandia National Labs. This chip enables aircraft developed electronics for work within a geothermal well logging tool. However, additional elements are needed to achieve commercially successful logging tools. These elements are offered by a strong list of industrial partners on this grant as: Electrochemical Systems Inc. for HT Rechargeable Batteries, Frequency Management Systems for 300C digital clock, Sandia National Labs for experts in high temperature solder, Honeywell Solid-State Electronics Centermore » for reprogrammable high temperature memory. During the course of this project MagiQ Technologies for high temperature fiber optics.« less

ILU industrial electron accelerators for medical-product sterilization and food treatment

NASA Astrophysics Data System (ADS)

Bezuglov, V. V.; Bryazgin, A. A.; Vlasov, A. Yu.; Voronin, L. A.; Panfilov, A. D.; Radchenko, V. M.; Tkachenko, V. O.; Shtarklev, E. A.

2016-12-01

Pulse linear electron accelerators of the ILU type have been developed and produced by the Institute of Nuclear Physics, Siberian Branch, Russian Academy of Sciences, for more than 30 years. Their distinctive features are simplicity of design, convenience in operation, and reliability during long work under conditions of industrial production. ILU accelerators have a range of energy of 0.7-10 MeV at a power of accelerated beam of up to 100 kW and they are optimally suitable for use as universal sterilizing complexes. The scientific novelty of these accelerators consists of their capability to work both in the electron-treatment mode of production and in the bremsstrahlung generation mode, which has high penetrating power.

78 FR 2437 - Corrected: Certain Cases For Portable Electronic Devices; Notice of Receipt of Complaint...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... cases for portable electronic devices. The complaint names as respondents Global Digital Star Industry... the United States, competitive conditions in the United States economy, the production of like or...

Electronic Dissemination of UN Agency Information.

ERIC Educational Resources Information Center

Stratford, Jean Slemmons; Stratford, Juri

1997-01-01

Highlights information, available electronically, about products and services by the United Nations (UN), UN Development Programme, High Commission for Refugees, UNICEF, Fund for Population Activities, Economic Commissions, Industrial Development Organization, International Labor Organization, UNESCO, Environment Program, World Meteorological…

High Frequency Electronic Packaging Technology

NASA Technical Reports Server (NTRS)

Herman, M.; Lowry, L.; Lee, K.; Kolawa, E.; Tulintseff, A.; Shalkhauser, K.; Whitaker, J.; Piket-May, M.

1994-01-01

Commercial and government communication, radar, and information systems face the challenge of cost and mass reduction via the application of advanced packaging technology. A majority of both government and industry support has been focused on low frequency digital electronics.

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

Active and Passive Supplier Assessment Program (ASAP & PSAP) WWW Sites http://nepp.nasa.gov/imd/asap http://nepp.nasa.gov/imd/psap

NASA Technical Reports Server (NTRS)

Brusse, Jay

2000-01-01

The Active and Passive Supplier Assessment Programs (ASAP and PSAP) WWW Sites provide general information to the electronic parts community regarding the availability of electronic parts. They also provide information to NASA regarding modifications to commonly used procurement specifications and test methods. The ASAP and PSAP www sites are ongoing resources produced by Code 562 in support of the NASA HQ funded NASA Electronic Parts and Packaging (NEPP) Program. These WWW sites do not provide information pertaining to patented or proprietary information. All of the information contained in these www sites is available through various other public domain resources such as US Military Qualified Producers Listings (QPLs) and Qualified Manufacturer Listings (QMLs) and industry working groups such as the Electronics Industry Alliance (EIA) and the Space Parts Working Group (SPWG).

Low Voltage Electron Beam Processing Final Report CRADA No. TC-645-93-A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, H.; Wakalopulos, G.

This CRADA project was established to develop a small, inexpensive sealed-tube electron beam processing system having immediate applications in industrial, high speed manufacturing processes, and in the Department of Energy (DOE) waste treatment/cleanup operations. The technical work involved the development and demonstration of a compact, sealed, 50-75 kilovolt (kV) EB generator prototype, including controls and power supply. The specific goals of this project were to develop a low cost vacuum tube capable of shooting an electron beam several inches into the air, and to demonstrate that wide area materials processing is feasible by stacking the tubes to produce continuous beams.more » During the project, we successfully demonstrated the producibility of a low cost electron beam system and several material processing operations of interest to US industry, DOE and, since September 11, 2001, the Homeland Security.« less

Will electronic personal health records benefit providers and patients in rural America?

PubMed

Hargreaves, John S

2010-03-01

The objective of this study was to educate stakeholders (e.g., providers, patients, insurers, government) in the healthcare industry about electronic personal health records (PHRs) and their potential application in rural America. Extensive research was performed on PHRs through standard literature search, product demonstrations, educational webinars, and fact finding via news releases. Various stakeholders are eager to transform the healthcare industry into the digital age like other industries (i.e., banking, retail). Despite low adoption of PHRs in 2008 (2.7% of U.S. adults), patients are interested in secure messaging and eVisits with their physicians, online appointment scheduling and reminders, and online access to their laboratory and radiology results. Federal agencies (e.g., Health and Human Services, Department of Defense, Veterans Affairs [VA]), popular information technology (IT) vendors (e.g., Google, Microsoft), and large insurers (e.g., Aetna) have energized the industry through pilot programs and new product announcements. It remains to be seen if barriers to adoption, including privacy concerns, lack of interoperability standards and funding, and provider resistance, can be overcome to enable PHRs to become a critical tool in the creation of a more efficient and less costly U.S. healthcare industry. Electronic PHRs hold great promise to enhance access and improve the quality of care provided to patients in rural America. Government, vendors, and insurers should create incentives for providers and patients to implement PHRs. Likewise, patients need to become more aware of PHRs and their ability to improve health outcomes.

Practical Problems in the Cement Industry Solved by Modern Research Techniques

ERIC Educational Resources Information Center

Daugherty, Kenneth E.; Robertson, Les D.

1972-01-01

Practical chemical problems in the cement industry are being solved by such techniques as infrared spectroscopy, gas chromatography-mass spectrometry, X-ray diffraction, atomic absorption and arc spectroscopy, thermally evolved gas analysis, Mossbauer spectroscopy, transmission and scanning electron microscopy. (CP)

Multi-Modal Electronic Payment Systems Best Practices and Convergence White Paper

DOT National Transportation Integrated Search

2010-02-25

The United States transportation industry has changed dramatically in the methodologies to collect fares and fees over the past 10-15 years. Largely a cash-centric approach until the early 90s, the toll and transit industries began automating ostensi...

Web Site Design Benchmarking within Industry Groups.

ERIC Educational Resources Information Center

Kim, Sung-Eon; Shaw, Thomas; Schneider, Helmut

2003-01-01

Discussion of electronic commerce focuses on Web site evaluation criteria and applies them to different industry groups in Korea. Defines six categories of Web site evaluation criteria: business function, corporate credibility, contents reliability, Web site attractiveness, systematic structure, and navigation; and discusses differences between…

Industry Training: Causes and Consequences.

ERIC Educational Resources Information Center

Smith, Andrew; Freeland, Brett

Research on Australian organizations in five industry sectors--building and construction, food processing, electronics manufacturing, retailing, and finance and banking--has identified these three key drivers of enterprise training: workplace change, quality assurance, and new technology. Operation of the training drivers is moderated by a range…

PV Solar Electricity: From a Niche Market to One of the Most Important Mainstream Markets for Electricity

NASA Astrophysics Data System (ADS)

Hoffmann, W.; Waldmann, L.

PV solar electricity is seen as one of the few booming markets, today and in the coming decades. This market has grown globally at a rate of about 40% per year over the past 10 years. Related industries have realized a two-digit, billion-dollar (U.S.) turnover worldwide. PV solar electricity is a high-tech industry with high performance potential in the coming decades, leaving even the electronics industries behind and approaching the automotive industry.

Technology transfer from NASA to targeted industries, volume 2

NASA Technical Reports Server (NTRS)

Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

1993-01-01

This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

China Report, Economic Affairs, No. 367

DTIC Science & Technology

1983-07-27

Industrial Production Guidelines (Shanghai City Service, 27 Jun 83) 43 Fujian, Jiangxi, Hunan Organize Cooperation Pact (ZHONGGUO XINWEN SHE, 4 Jul 83...RIBAO, 26 Jun 83) ... 102 INDUSTRY Gu Xiulian Meets Xinjiang Economic Delegation (XINHUA RIBAO, 14 Jun 83) China Delivers Ships to Foreign...Owners (XINHUA, 2 Jul 83) Development of Ningxia’s Electronics Industry Urged (Yang Yunsheng; NINGXIA RIBAO, 21 Apr 83) M CONSTRUCTION Hubei

Energy determination in industrial X-ray processing facilities

NASA Astrophysics Data System (ADS)

Cleland, M. R.; Gregoire, O.; Stichelbaut, F.; Gomola, I.; Galloway, R. A.; Schlecht, J.

2005-12-01

In industrial irradiation facilities, the determination of maximum photon or electron energy is important for regulated processes, such as food irradiation, and for assurance of treatment reproducibility. With electron beam irradiators, this has been done by measuring the depth-dose distribution in a homogeneous material. For X-ray irradiators, an analogous method has not yet been recommended. This paper describes a procedure suitable for typical industrial irradiation processes, which is based on common practice in the field of therapeutic X-ray treatment. It utilizes a measurement of the slope of the exponential attenuation curve of X-rays in a thick stack of polyethylene plates. Monte Carlo simulations and experimental tests have been performed to verify the suitability and accuracy of the method between 3 MeV and 8 MeV.

Dimensional measuring techniques in the automotive and aircraft industry

NASA Astrophysics Data System (ADS)

Muench, K. H.; Baertlein, Hugh

1994-03-01

Optical tooling methods used in industry are rapidly being replaced by new electronic sensor techniques. The impact of new measuring technologies on the production process has caused major changes on the industrial shop floor as well as within industrial measurement systems. The paper deals with one particular industrial measuring system, the manual theodolite measuring system (TMS), within the aircraft and automobile industry. With TMS, setup, data capture, and data analysis are flexible enough to suit industry's demands regarding speed, accuracy, and mobility. Examples show the efficiency and the wide range of TMS applications. In cooperation with industry, the Video Theodolite System was developed. Its origin, functions, capabilities, and future plans are briefly described. With the VTS a major step has been realized in direction to vision systems for industrial applications.

76 FR 570 - Draft Guidance for Industry and Food and Drug Administration Staff; Establishing the Performance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... electronic or written comments on the draft guidance by April 5, 2011. ADDRESSES: Submit written requests for... INFORMATION section for information on electronic access to the guidance. Submit electronic comments on the..., plasma, and blood. These devices are used to aid in the diagnosis of Lyme disease. This document does not...

The Determinants of Electronic Textbook Use among College Students

ERIC Educational Resources Information Center

Miller, Jon R.; Nutting, Andrew W.; Baker-Eveleth, Lori

2012-01-01

Electronic books are a fast-growing component of the publishing industry. Sales of electronic textbooks (e-textbooks) are growing, but at a slower rate. In this research we use data from an undergraduate student survey to estimate the determinants of e-textbook use. We find that students who are younger, lower-income, and from larger high schools…

78 FR 31515 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... program is to improve, develop, or finance businesses, industries, and employment and improve the economic..., electronic, mechanical, or other technological collection techniques or other forms of information technology... Business Service Title: 7 CFR 4279-B, Guaranteed Loan Making--Business and Industry Loans. OMB Control...

Chameleons in Marketspace: Industry Transformation in the New Electronic Marketing Environment.

ERIC Educational Resources Information Center

Pattinson, Hugh; Brown, Linden

1996-01-01

Discusses the new information infrastructure and its possible influences on marketing. Highlights include an alternative perspective of industrial economic history based on infrastructure development; the Internet and its positioning within the new information infrastructure; future possibilities and impacts on organizational structure; and…

Human Body Interfacing.

ERIC Educational Resources Information Center

Fryda, Lawrence J.; Harrington, Robert; Szumal, Clint

Electronics Engineering Technology majors in the Industrial and Engineering Technology department at Central Michigan University have developed many real-world projects that represent the type of problem-solving projects encouraged by industry. Two projects that can be used by other educators as freestanding projects or as the core for further…

An Industry Redefined

ERIC Educational Resources Information Center

Breeding, Marshall

2007-01-01

Activities in 2006 pointed to strategic shifts in library automation. The dynamics of the business environment changed rapidly from a fragmented industry to a highly consolidated one. Though the integrated library system (ILS) continues to represent the largest portion of revenue, products that deal with electronic content and deliver better…

Status and future trends of radiation processing in Brazil

NASA Astrophysics Data System (ADS)

Lugão, A. B.; Andrade, E.; Silva, L. G.

1998-06-01

Electron-beam and gamma irradiation of polymers are widely applied in Brazil today. The main applications are: - radio-induced crosslinking of wire and cable for automobile and appliance industry; - heat shrinkable tubes for appliance, automobile and electronic; - heat shrinkable packing for food processing industry; - sterilization of medical supplies and so on. Nevertheless, there are only a few industrial facilities about 20 years old in full operation at present and there are some new low energy machines for food packing. The reason for such absence of investment in this area was studied and the relation between automobile and appliance production with radiation processing was fully demonstrated for Brazil case. In conclusion, it was shown that the industry of radiation processing of polymers is likely to experience a strong growth based on the continuous increase in the production of automobiles and appliances. The R&D activities of IPEN are an important support for developing the necessary technology and developing the necessary confidence in the radiation as tool for economical and social growth.

Photonics: Maintaining competitiveness in the information era

NASA Astrophysics Data System (ADS)

Photonics concerns the use of photons to work with or to replace electrons in certain communications, computer, or control applications traditionally carried out by electronics. It is a key high-technology area, well established in long-distance fiber-optic telecommunications and rapidly growing in other areas of great importance to society. This report concentrates on technical areas where the overall worldwide market for equipment approaches $400 billion per year, i.e., Telecommunications; Information processing; Optical storage and display; Optical sensors; and Policy Issues. It is essential to increase our industrial competitiveness in product development, manufacturing skills, and marketing; There must be continuing industrial effort in long-range research and innovation; The photonics industry should consider the advantages of an industry association that could help organize consortia to conduct cooperative research and address technical problems and policy issues beyond the scope of any one organization; and Government contractors who receive a percentage of sales for their independent research should devote a sizable fraction to projects with a life span of 5 to 10 years.

Fast detection of toxic industrial compounds by laser ion mobility spectrometry

NASA Astrophysics Data System (ADS)

Oberhuettinger, Carola; Langmeier, Andreas; Oberpriller, Helmut; Kessler, Matthias; Goebel, Johann; Mueller, Gerhard

2009-05-01

Trace detection of toxic industrial compounds has been investigated with the help of a laser ion mobility spectrometer (LIMS). The LIMS was equipped with a tuneable UV laser source for enabling two-photon ionization of the analyte gases and an ion drift tube for the measurement of the ion mobility. Different aromatic and aliphatic hydrocarbons as well as amines were investigated. We find that the first class of molecules can be well ionized due to the delocalization of their valence electron shells and the second due to the presence of non-bonding electrons in lone-pair orbitals. Selectivity of detection is attained on the basis of molecule-specific photo-ionization and drift time spectra. Ion currents were found to scale linearly with the substance concentration over several orders of magnitude down to the detection limits in the ppt range. As besides toxic industrial compounds, similar electron configurations also occur in illicit drugs, toxins and pharmaceutical substances, LIMS can be applied in a variety of fields ranging from environmental analysis, air pollution monitoring, drug detection and chemical process monitoring.

Trends for Electron Beam Accelerator Applications in Industry

NASA Astrophysics Data System (ADS)

Machi, Sueo

2011-02-01

Electron beam (EB) accelerators are major pieces of industrial equipment used for many commercial radiation processing applications. The industrial use of EB accelerators has a history of more than 50 years and is still growing in terms of both its economic scale and new applications. Major applications involve the modification of polymeric materials to create value-added products, such as heat-resistant wires, heat-shrinkable sheets, automobile tires, foamed plastics, battery separators and hydrogel wound dressing. The surface curing of coatings and printing inks is a growing application for low energy electron accelerators, resulting in an environmentally friendly and an energy-saving process. Recently there has been the acceptance of the use of EB accelerators in lieu of the radioactive isotope cobalt-60 as a source for sterilizing disposable medical products. Environmental protection by the use of EB accelerators is a new and important field of application. A commercial plant for the cleaning flue gases from a coal-burning power plant is in operation in Poland, employing high power EB accelerators. In Korea, a commercial plant uses EB to clean waste water from a dye factory.

Utilizing A Laser-Based Composition System For Management Training And Research In The United Kingdom

NASA Astrophysics Data System (ADS)

Buckler, G. F.

1980-08-01

The utilization of electronic composition technology in the United Kingdom has been complicated by rapidity of change and constrained by the use of concepts and equipment unfamiliar to the traditional management and labour force employed in the printing industry. To help overcome these problems, Pira (The Research Association for the Paper and Board, Printing and Packaging Industries) set out to devise a basic electronic composition system that could be used to similate the production requirements of text composition for a range of different printed products, e.g. books, magazines, newspapers, etc. The paper will describe a Composition Centre that has been in operation since April 1978. It provides for investigating, developing, and evaluating the use of the latest electronic composition and related systems, together with staff and facilities for advising, demonstrating and providing 'hands-on' induction training mainly for the decision makers in industry. It uses a variety of equipment including the Monotype Lasercomp, Linotron 202, AM Compset 550, Xenotron Videocomposer, and the Ferranti CS 7 composition system. The paper will also include a description of some of the research projects recently comnieted_

Agent-based services for B2B electronic commerce

NASA Astrophysics Data System (ADS)

Fong, Elizabeth; Ivezic, Nenad; Rhodes, Tom; Peng, Yun

2000-12-01

The potential of agent-based systems has not been realized yet, in part, because of the lack of understanding of how the agent technology supports industrial needs and emerging standards. The area of business-to-business electronic commerce (b2b e-commerce) is one of the most rapidly developing sectors of industry with huge impact on manufacturing practices. In this paper, we investigate the current state of agent technology and the feasibility of applying agent-based computing to b2b e-commerce in the circuit board manufacturing sector. We identify critical tasks and opportunities in the b2b e-commerce area where agent-based services can best be deployed. We describe an implemented agent-based prototype system to facilitate the bidding process for printed circuit board manufacturing and assembly. These activities are taking place within the Internet Commerce for Manufacturing (ICM) project, the NIST- sponsored project working with industry to create an environment where small manufacturers of mechanical and electronic components may participate competitively in virtual enterprises that manufacture printed circuit assemblies.

Computer-Aided Acquisition and Logistic Support Gateway Development

DTIC Science & Technology

1989-09-01

The initial step integrates the current vendor interfaces (Paperless Order Processing System (POPS) and SAMXIMS Procurement by Electronic Data Exchange...Paperless Order Processing System POSIX = Portable Operating System for UNIX RFQ = Request for Quotation RS-232C = The Electronics Industries

Stitch-bond parallel-gap welding for IC circuits

NASA Technical Reports Server (NTRS)

Chvostal, P.; Tuttle, J.; Vanderpool, R.

1980-01-01

Stitch-bonded flatpacks are superior to soldered dual-in-lines where size, weight, and reliability are important. Results should interest designers of packaging for complex high-reliability electronics, such as that used in security systems, industrial process control, and vehicle electronics.

Cybermultilingualism.

ERIC Educational Resources Information Center

Bandyopadhayay, Debaprasad

2000-01-01

The introduction of computational linguistics triggers a new space for communication, an electronic space for a simulated communication network, founded by the post-industrialized society. The language inaugurated by these electronic media is an electric language stripped of its signifier. The new language planning enterprise in cyberspace…

Information Delivery Options over Three Decades.

ERIC Educational Resources Information Center

Kennedy, H. E.

1986-01-01

Reviews the development of technological innovations in information delivery, including microforms, electronic processing, online distribution, full-text abstracts online, floppy disks, downloading, vertical integration, electronic publishing, and optical disks. The impact of technology on the information industry and the need to use technology…

75 FR 65378 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-22

... Certain Electronic Device Mixer Apparatus for use in the Audio Disc-Jockey Industry, DN 2761; the... within the United States after importation of certain electronic device mixer apparatus for use in the...

PILOT-SCALE STUDIES ON THE INCINERATION OF ELECTRONICS INDUSTRY WASTE

EPA Science Inventory

The paper describes experiments performed on a pilot-scale rotary kiln incinerator to investigate the emissions and operational behavior during the incineration of consumer electronics waste. These experiments were targeted at destroying the organic components of printed circuit ...

Findings of the rechargeable battery study sponsored by NATIBO (North American technology and industrial base organization)

NASA Astrophysics Data System (ADS)

Gucinski, James A.; Slack, Michael

This paper summarizes and updates the findings of the North American technology and industrial base organization (NATIBO) study entitled "Rechargeable Battery/Systems for Communication/Electronic Application". The mission of the NATIBO organization is to promote a cost effective and healthy technology and industrial base that is responsive to the national and economical security needs of the United States and Canada.

Marketing Violent Entertainment to Children: A Six-Month Follow-Up Review of Industry Practices in the Motion Picture, Music Recording & Electronic Game Industries. A Report to Congress.

ERIC Educational Resources Information Center

Federal Trade Commission, Washington, DC.

In September 2000, the Federal Trade Commission issued a report on marketing violent entertainment to children. The Commission found that all three segments of the entertainment industry intentionally promoted products to children that warranted parental cautions. This report provides a look at the advertising practices to see if the industries…

A High-Average-Power Free Electron Laser for Microfabrication and Surface Applications

NASA Technical Reports Server (NTRS)

Dylla, H. F.; Benson, S.; Bisognano, J.; Bohn, C. L.; Cardman, L.; Engwall, D.; Fugitt, J.; Jordan, K.; Kehne, D.; Li, Z.;

Polychlorinated biphenyls in settled dust from informal electronic waste recycling workshops and nearby highways in urban centers and suburban industrial roadsides of Chennai city, India: Levels, congener profiles and exposure assessment.

PubMed

Chakraborty, Paromita; Prithiviraj, Balasubramanian; Selvaraj, Sakthivel; Kumar, Bhupander

2016-12-15

Polychlorinated biphenyls (PCBs) were quantified in settled dust collected from informal electronic waste (e-waste) recycling workshops and nearby highways in the urban centers and roadside dust from the suburban industrial belt of Chennai city in India. Further dust samples were subjected to a high resolution field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (FESEM/EDX) to characterize the shape, size and elemental composition of the dust particles. Geomean of total PCB concentration followed the following order: informal e-waste metal recovery workshops (53ngg -1 )>e-waste dismantling sites (3.6ngg -1 )>nearby highways (1.7ngg -1 )>suburban industrial roadsides (1.6ngg -1 ). In e-waste workshops, tetra, penta and hexa-PCB homologs contributed two third of Σ 26 PCB concentration. Informal e-waste recycling workshops contributed more than 80% concentration of all the PCB congeners loaded in the first principal component. Predominance of dioxin like PCBs, PCB-l14, -118 and -126 in the e-waste metal recovery sites were presumably due to combustion and pyrolytic processes performed during recycling of electrical components. According to the morphology and elemental composition, settled dust from e-waste workshops were irregular particles heavily embedded with toxic metals and industrial roadside dust were distinct angular particles. FESEM revealed that average particle size (in Ferret diameter) increased in the following order: e-waste recycling workshops (0.5μm)

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2012 CFR

2012-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2013 CFR

2013-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

Australia's IT&T Future: A Strategic Analysis Report 1 July 1998.

ERIC Educational Resources Information Center

Australian Library Journal, 1998

1998-01-01

Summarizes the GartnerGroup's views on issues in the information technology and telecommunications (IT&T) industry debate in Australia. Topics include attracting overseas investment to create a globally competitive industry; the government's role; perceived problems; the Internet and electronic commerce; and future issues, including…

75 FR 59710 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... Approval; Comment Request; Aerospace Manufacturing and Rework Industry Information Collection AGENCY... electronic docket, go to http://www.regulations.gov . Title: Aerospace Manufacturing and Rework Industry... manufacturing and rework facilities and has been tailored to the processes at aerospace facilities. Respondents...

A Guide for Equipping Industrial Arts Facilities.

ERIC Educational Resources Information Center

American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

A guide for planning new and revising existing industrial arts facilities which gives a listing of tools and equipment recommended for each of the major areas of instruction (automotive and power mechanics, ceramics, drafting, electronics, elementary, general shop, graphic arts, metalworking, plastics, and woodworking). General descriptions and…

Low-Dielectric Polyimides

NASA Technical Reports Server (NTRS)

St. Clair, Anne K.; St. Clair, Terry L.; Winfree, William P.; Emerson, Bert R., Jr.

1989-01-01

New process developed to produce aromatic condensation polyimide films and coatings having dielectric constants in range of 2.4 to 3.2. Materials better electrical insulators than state-of-the-art commercial polyimides. Several low-dielectric-constant polyimides have excellent resistance to moisture. Useful as film and coating materials for both industrial and aerospace applications where high electrical insulation, resistance to moisture, mechanical strength, and thermal stability required. Applicable to production of high-temperature and moisture-resistance adhesives, films, photoresists, and coatings. Electronic applications include printed-circuit boards, both of composite and flexible-film types and potential use in automotive, aerospace, and electronic industries.

Dual use application of killer app FHE products for Mil/Aero

NASA Astrophysics Data System (ADS)

Hackler, R. Douglas

2016-05-01

The flexible electronics industry has adopted flexible hybrid electronic (FHE) systems as a go to market strategy. High volume products are emerging for body worn bio patches, conformal structural appliques and smart labels. These products were principally developed for volume consumer and industrial market solutions but are directly applicable to advanced defense systems. This article highlights the state of the art for bio patch, conformal and smart FHE products and identifies their dual use capability for defense systems. A discussion of the manufacturing base for FHE products is presented and current experimental prototype results and performance are shared.

Commercial printing and electronic color printing

NASA Astrophysics Data System (ADS)

Webb, Joseph W.

1995-04-01

Technologies such as Xeikon, Indigo, and the Heidelberg/Presstek GTO-DI can change both the way print buyers may purchase printed material and the way printers and trade services respond to changing demands. Our recent study surveys the graphic arts industry for their current views of these new products and provides forecasts of installations and usage with breakdowns by market segment and size of firm. The acceptance of desktop publishing and electronic prepress have not only paved the way for a totally electronic printing process, but it has broadened the base of people who develop color originals for reproduction. Electronic printing adds the ability to customize jobs on the fly. How print providers will respond to the impact of electronic color printing depends on how each firm perceives the 'threat.' Most printing companies are run by entrepreneurial individuals who have, as their highest priority, their own economic survival. Service bureaus are already looking at electronic color printing as yet another way to differentiate their businesses. The study was based on a mail survey with 682 responses from graphic arts firms, interviews with printers, suppliers, associations and industry executives, and detailed secondary research. Results of a new survey in progress in January 1995 is also presented.

Scalable Sub-micron Patterning of Organic Materials Toward High Density Soft Electronics

PubMed Central

Kim, Jaekyun; Kim, Myung-Gil; Kim, Jaehyun; Jo, Sangho; Kang, Jingu; Jo, Jeong-Wan; Lee, Woobin; Hwang, Chahwan; Moon, Juhyuk; Yang, Lin; Kim, Yun-Hi; Noh, Yong-Young; Yun Jaung, Jae; Kim, Yong-Hoon; Kyu Park, Sung

2015-01-01

The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. In this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. The successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics. PMID:26411932

Electron beam agrobionanotechnologies for agriculture and food industry enabled by electron accelerators

NASA Astrophysics Data System (ADS)

Pavlov, Y. S.; Revina, A. A.; Souvorova, O. V.; Voropaeva, N. L.; Chekmar, D. V.; Abkhalimov, E. V.; Zavyalov, M. A.; Filippovich, V. P.

2017-12-01

Electron beam (EB) radiation technologies have been employed to increase efficiency of biologically active nanochips developed for agricultural plants seed pre-treatment with purpose of enhancing crop yield and productivity. Iron-containing nanoparticles (NPs), synthesized in reverse micelles following known radiation-chemical technique, have served as a multifunctional biologically active and phytosanitary substance of the chips. Porous chip carriers activation has been performed by EB ionization (doze 20kGy) of the active carbons (AC) prepared from agricultural waste and by-products: Jerusalem artichoke (Helianthus tuberosus) straw, rape (Brassica napus L. ssp. oleifera Metzg) straw, camelina (Camelina sativa (L.) Crantz) straw, wheat (Triticum aestivum) straw. Three methods, UV-VIS spectrophotometry, Electron Paramagnetic Resonance (EPR) spectroscopy, cyclic voltammetry (CV) have been used for process control and characterization of radiation-activated and NPs-modified ACs. The results show a notable effect of ACs activation by electron beam radiation, evidenced by FeNPs-adsorption capacity increase. Studies of the impact of Fe NPs-containing nanochip technology on enhancement of seeds germination rate and seedlings vigour suggest that reported electron beam radiation treatment techniques of the ACs from selected agricultural residues may be advantageous for industrial application.

Scalable sub-micron patterning of organic materials toward high density soft electronics

DOE PAGES

Kim, Jaekyun; Kim, Myung -Gil; Kim, Jaehyun; ...

2015-09-28

The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. Inmore » this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. As a result, the successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.« less

Applications and Advances in Electronic-Nose Technologies

PubMed Central

Wilson, Alphus D.; Baietto, Manuela

2009-01-01

Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man. PMID:22346690

An electron beam linear scanning mode for industrial limited-angle nano-computed tomography.

PubMed

Wang, Chengxiang; Zeng, Li; Yu, Wei; Zhang, Lingli; Guo, Yumeng; Gong, Changcheng

2018-01-01

Nano-computed tomography (nano-CT), which utilizes X-rays to research the inner structure of some small objects and has been widely utilized in biomedical research, electronic technology, geology, material sciences, etc., is a high spatial resolution and non-destructive research technique. A traditional nano-CT scanning model with a very high mechanical precision and stability of object manipulator, which is difficult to reach when the scanned object is continuously rotated, is required for high resolution imaging. To reduce the scanning time and attain a stable and high resolution imaging in industrial non-destructive testing, we study an electron beam linear scanning mode of nano-CT system that can avoid mechanical vibration and object movement caused by the continuously rotated object. Furthermore, to further save the scanning time and study how small the scanning range could be considered with acceptable spatial resolution, an alternating iterative algorithm based on ℓ 0 minimization is utilized to limited-angle nano-CT reconstruction problem with the electron beam linear scanning mode. The experimental results confirm the feasibility of the electron beam linear scanning mode of nano-CT system.

An electron beam linear scanning mode for industrial limited-angle nano-computed tomography

NASA Astrophysics Data System (ADS)

Wang, Chengxiang; Zeng, Li; Yu, Wei; Zhang, Lingli; Guo, Yumeng; Gong, Changcheng

2018-01-01

Nano-computed tomography (nano-CT), which utilizes X-rays to research the inner structure of some small objects and has been widely utilized in biomedical research, electronic technology, geology, material sciences, etc., is a high spatial resolution and non-destructive research technique. A traditional nano-CT scanning model with a very high mechanical precision and stability of object manipulator, which is difficult to reach when the scanned object is continuously rotated, is required for high resolution imaging. To reduce the scanning time and attain a stable and high resolution imaging in industrial non-destructive testing, we study an electron beam linear scanning mode of nano-CT system that can avoid mechanical vibration and object movement caused by the continuously rotated object. Furthermore, to further save the scanning time and study how small the scanning range could be considered with acceptable spatial resolution, an alternating iterative algorithm based on ℓ0 minimization is utilized to limited-angle nano-CT reconstruction problem with the electron beam linear scanning mode. The experimental results confirm the feasibility of the electron beam linear scanning mode of nano-CT system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jaekyun; Kim, Myung -Gil; Kim, Jaehyun

The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. Inmore » this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. As a result, the successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.« less

Industrial garnet

USGS Publications Warehouse

Olson, D.W.

2000-01-01

The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

Application of Nanotechnology and Nanomaterials in Oil and Gas Industry

NASA Astrophysics Data System (ADS)

Nabhani, Nader; Emami, Milad; Moghadam, A. B. Taghavi

2011-12-01

Micro and nano technologies have already contributed significantly to technological advances in a number of industries, including electronics, biomedical, pharmaceutical, materials and manufacturing, aerospace, photography and more recently the energy industries. Micro and nanotechnologies have the potential to introduce revolutionary changes in several areas of the oil and gas industries such as exploration, drilling, production, refining and distribution. For example, nanosensors might provide more detailed and accurate information about reservoirs and smart fluids for enhanced oil recovery (EOR) and drilling. This paper examines and documents applicable nanotechnology base products that can improve the competitiveness of the oil and gas industry. The future challenges of nanotechnology application in the oil and gas industry are also discussed.

A Year in the Life of the NASA Electronic Parts and Packaging (NEPP) Program

NASA Technical Reports Server (NTRS)

Label, Kenneth A.

2017-01-01

NEPP Mission Statement: Provide NASAs leadership for developing and maintaining guidance for the screening, qualification, test, and reliable usage of electrical, electronic, and electromechanical (EEE) parts by NASA, in collaboration with other government Agencies and industry.

78 FR 116 - Certain Cases for Portable Electronic Devices: Notice of Receipt of Complaint; Solicitation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... complaint names as respondents Global Digital Star Industry, Ltd. of China; JWIN Electronics Corp., (d/b/a i... United States economy, the production of like or directly competitive articles in the United States, or...

40 CFR Appendix A to Part 438 - Typical Products in Metal Products and Machinery Sectors

Code of Federal Regulations, 2011 CFR

2011-07-01

... Trailers ELECTRONIC EQUIPMENT Communications Equipment Connectors for Electronic Applications Electric... Blades Hardware Heating Equipment, Except Electric Industrial Furnaces & Ovens Iron & Steel Forgings.... & Inst. Elec. Lighting Fixtures Current-Carrying Wiring Devices Electirc Housewares & Fans Electric Lamps...

40 CFR Appendix A to Part 438 - Typical Products in Metal Products and Machinery Sectors

Code of Federal Regulations, 2010 CFR

2010-07-01

... Trailers ELECTRONIC EQUIPMENT Communications Equipment Connectors for Electronic Applications Electric... Blades Hardware Heating Equipment, Except Electric Industrial Furnaces & Ovens Iron & Steel Forgings.... & Inst. Elec. Lighting Fixtures Current-Carrying Wiring Devices Electirc Housewares & Fans Electric Lamps...

Managing innovation: lessons from the cardiac-pacing industry.

PubMed

Gobeli, D H; Rudelius, W

1985-01-01

In this article, the authors argue that innovation is a surefire way for a firm to increase its sales and market share. This, in turn, can stimulate American industries and make American firms more competitive in international markets. Through their study of the cardiac-pacing industry, they draw conclusions about what factors contribute to a successful innovation in other industries besides medical electronics. They identify general patterns and stages of the innovation process, key roles top management must fill in an organization, and effective policies that foster important innovations.

Roadmap evolution: from NTRS to ITRS, from ITRS 2.0 to IRDS

NASA Astrophysics Data System (ADS)

Gargini, Paolo A.

2017-10-01

The semiconductor industry benefitted from roadmap guidance since the mid-60s. The roadmap anticipated and outlined the main needs of the semiconductor industry for years to come and identified future challenges and possible solutions. Making transistor smaller by means of advanced lithographic technologies enabled both increased integration levels and improved IC performance. The roadmap methodology allowed the removal of multiple "red brick walls". The NTRS and the ITRS constituted primarily a "bottom up" approach as standard microprocessors and memories where introduced at a blistering pace barely allowing time for system houses to integrate them in their products. The 1998 ITRS provided the vision that triggered research, development and manufacturing communities to develop a completely new transistor structure in addition to replacing aluminum interconnects with a more advanced technology. The advent of Foundries and Fabless companies transformed the electronics industry into a "top down" driven industry in the past 15 years. The ITRS adjusted to this new ecosystem and morphed into the International Roadmap for Devices and Systems (IRDS) sponsored by IEEE. The IRDS is addressing the requirements and needs of the renewed electronics industry. Furthermore, by the middle of the next decade the ability to layout integrated circuits in a 2D geometry grid will reach fundamental physical limits and the aggressive conversion to 3D architecture for integrated circuit must be pursued across the board as an avenue to continuously increasing transistor count and improving performance. EUV technology is finally approaching the manufacturing stage but with the advent of 3D monolithically integrated heterogeneous circuits approaching in the not-toodistant future should the semiconductor industry concentrate its resources on the next lithographic technology generation in order to enhance resolution or on providing a smooth transition to the new revolutionary 3D architecture of integrated circuits? It is essential for the whole semiconductor industry to come together and make fundamental choices leading to a cooperative and synchronized allocation of adequate resources to produce viable solutions that once introduced in a timely manner into manufacturing will enable the continuation of the growth of the electronic industry at a pace comparable or exceeding historical trends.

Gaining Insights Into the Waterpipe Tobacco Industry: Participant Observation and a Cross-Sectional Survey of Products at a Trade Exhibition.

PubMed

Jawad, Mohammed; Nakkash, Rima T; Hawkins, Ben; Akl, Elie A

2016-05-01

The rise in waterpipe tobacco smoking has been accompanied by the emergence of a diverse range of products, such as "herbal" waterpipe tobacco substitutes and electronic waterpipes. The aims of this study were to assess the extent to which emerging waterpipe products are being developed by waterpipe tobacco companies themselves, to understand the key characteristics of the main market players, and to examine the connections between producers of different product categories. In 2014, one researcher attended an international waterpipe trade exhibition in Germany, conducting a survey of products at exhibition stands, and gathering qualitative data on exhibitors and products using participant observation. Cross-tabulations and chi-square tests identified the association between waterpipe tobacco, waterpipe tobacco substitutes, and electronic waterpipe products. We thematically analyzed field notes into information about exhibitors and products. Of 97 exhibitors, 55 displayed waterpipe-related products. Of these, nearly half (45%) displayed electronic waterpipe products, 38% displayed waterpipe tobacco and 23% displayed waterpipe tobacco substitutes. There was an inverse association between the display of waterpipe tobacco and electronic waterpipe products, and a positive association between the display of waterpipe tobacco and waterpipe tobacco substitutes. We found that Japan Tobacco Inc, Philip Morris, and British American Tobacco were partnered or affiliated with exhibitors displaying waterpipe-related products. Electronic waterpipe products were the main feature of this exhibition. Waterpipe tobacco substitutes are likely to be produced by the waterpipe tobacco industry whereas electronic waterpipes are not. There is a developing interest in waterpipe-related products by transnational tobacco corporations. Further industry surveillance is warranted. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Are These Books, or What? CD-ROM and the Literary Industry.

ERIC Educational Resources Information Center

Lyall, Sarah

1994-01-01

Considers the concept of print books versus newer electronic formats, including CD-ROM and online versions. Topics discussed include changes in the publishing industry; a focus on content; reference books, including encyclopedias and dictionaries; children's books; multimedia publishers versus traditional book publishers; and production and…

Communication Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2209

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2009

2009-01-01

The graduate of the Communication Technician apprenticeship program is a certified journeyperson who will be able to: (1) supervise, train and coach apprentices; (2) use a thorough knowledge of electrical and electronic theory and its application to communication and associated equipment used in the telecommunication industry; (3) understand…

77 FR 19718 - Ford Motor Company Twin Cities Assembly Plant Vehicle Operations Division Including On-Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... Cities Assembly Plant Vehicle Operations Division Including On-Site Leased Workers From AEROTEK, Albers... Industries, Waste Management, VMX, Nascote Industries, Delphi Electronics & Safety, Unicomm, And Pacer... Operations Division, St. Paul, Minnesota. The workers are engaged in activities related to the production of...

78 FR 46940 - Hazardous and Solid Waste Management System: Identification and Listing of Special Wastes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... your comment. Electronic files should avoid the use of special characters, any form of encryption, and....epa.gov/epawaste/nonhaz/industrial/special/fossil/ccr-rule/index.htm . SUPPLEMENTARY INFORMATION: I... Integrity Surface Impoundment Assessments at: http://www.epa.gov/wastes/nonhaz/industrial.special/fossil...

Innovative University-Industry-Government Collaboration. Six Case Studies from the USA.

ERIC Educational Resources Information Center

Dryden, R. D.; Erzurumlu, H. C. M.

1996-01-01

University-industry-government collaborations face challenges that necessitate a new culture or mindset. Six U.S. case examples demonstrate ways to create a win-win-win scenario and sustain partnerships: Oregon Joint Graduate Schools of Engineering; Network for Engineering and Research in Oregon; Blacksburg Electronic Village; research…

NCC and Computers in Education.

ERIC Educational Resources Information Center

Brown, Ron L.

1982-01-01

This introduction to the work of the National Computing Centre (NCC), looks at industry/education links, the development of case studies, the use of computers in training, work in the Department of Industry - Micros in Schools Scheme, and at the Department of Education and Science-Micro-Electronics in Education Programme. (MP)

A Language Challenge to the Hispanic American.

ERIC Educational Resources Information Center

Nino, Miguel A.

The Hispanic-American, because he or she is bilingual and bicultural, could play an important role in the future economic development of the United States. Declines in steel, automotive, and electronics industries due to foreign competition and market saturation have caused industrial displacement and unemployment. The Maquiladora or Twin Plant…

Electronic Business Transaction Infrastructure Analysis Using Petri Nets and Simulation

ERIC Educational Resources Information Center

Feller, Andrew Lee

2010-01-01

Rapid growth in eBusiness has made industry and commerce increasingly dependent on the hardware and software infrastructure that enables high-volume transaction processing across the Internet. Large transaction volumes at major industrial-firm data centers rely on robust transaction protocols and adequately provisioned hardware capacity to ensure…

A Competency-Based Program for Electronic Gaming Equipment Repair.

ERIC Educational Resources Information Center

Hardman, James R.

This program is designed to provide entry-level training to individuals (especially workers displaced from industry) who desire employment as "slot technicians" in the casino industry. The 96-hour course includes both classroom instruction and hands-on experience. Sources for direct purchase of required manuals are provided. The 13…

Industrial Ceramics: Secondary Schools.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Bureau of Curriculum Development.

The expanding use of ceramic products in today's world can be seen in the areas of communications, construction, aerospace, textiles, metallurgy, atomic energy, and electronics. The demands of science have brought ceramics from an art to an industry using mass production and automated processes which requires the services of great numbers as the…

A GUIDE FOR EQUIPPING INDUSTRIAL ARTS FACILITIES.

ERIC Educational Resources Information Center

American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

SCHOOL ARCHITECTS, ADMINISTRATORS, PLANNERS, AND INDUSTRIAL ARTS SUPERVISORS AND TEACHERS MAY USE THIS GUIDE IN PLANNING, REVISING, AND EVALUATING FACILITIES. IN THE FIRST PART, HAND TOOLS, MACHINES, AND GENERAL EQUIPMENT ARE LISTED FOR (1) AUTO AND POWER MECHANICS, (2) CERAMICS, (3) DRAFTING, (4) ELECTRICITY-ELECTRONICS, (5) ELEMENTARY, (6)…

JPRS Report, East Europe.

DTIC Science & Technology

1990-01-29

especially those involving consumer would not solve the problem. Only the combined effect electronics and tourism . If today we are selling roughly of...were obtained in most of the No 10, 1989pp 20-29 important industries and branches, as well as in key products of a classic industrial character such as...year it was on the industrial output during the first three postwar decades agenda of the CC CPCZ economic commission, subse- was about 2.5-3 times

JTEC Panel report on electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John; Meieran, Gene; Pecht, Michael; Peeples, John; Tummala, Rao; Dehaemer, Michael J.; Holdridge, Geoff (Editor); Gamota, George

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies.

NASA Electronic Parts and Packaging (NEPP) - A NASA Office of Safety and Mission Assurance (OSMA) Program

NASA Technical Reports Server (NTRS)

Label, Kenneth A.

2017-01-01

NEPP Mission Statement: Provide NASA's leadership for developing and maintaining guidance for the screening, qualification, test, and reliable usage of electrical, electronic, and electromechanical (EEE) parts by NASA, in collaboration with other government Agencies and industry.

Hazardous Waste Cleanup: Methode Electronics Incorporated in Willingboro Township, New Jersey

EPA Pesticide Factsheets

The former Methode Electronics facility is a 3.06 acre site located at; 10 Industrial Drive, Willingboro Township, Burlington County, New Jersey, approximately two miles east of the Delaware River, one-half mile southeast of route 130, and one-half mile

5 CFR 532.315 - Additional survey jobs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... data obtained in special industries WG-10 Communications Telephone Installer-Repairer WG-9 Central... Repairer WG-11 Electronic Computer Mechanic WG-11 Television Station Mechanic WG-11 Guided missiles Electronic Computer Mechanic WG-11 Guided Missile Mechanical Repairer WG-11 Heavy duty equipment Heavy Mobile...

The development of optimal on-premise Electronic Message Center (EMC) lighting levels and sign lighting measurement techniques.

DOT National Transportation Integrated Search

2013-02-01

Research conducted recently for the United States Sign Council Foundation found no consensus in the research : literature or the practices of the commercial electronic message center (EMC) industry on lighting measurement : or appropriate lighting le...

Molecular electronics: The technology of sixth generation computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jarvis, M.T.; Miller, R.K.

1987-01-01

In February 1986, Japan began the 6th Generation project. At the 1987 Economic Summit in Venice, Prime Minister Yashuhiro Makasone opened the project to world collaboration. A project director suggests that the 6th Generation ''may just be a turning point for human society.'' The major rationale for building molecular electronic devices is to achieve advances in computational densities and speeds. Proposed chromophore chains for molecular-scale chips, for example, could be spaced closer than today's silicone elements by a factor of almost 100. This book describes the research and proposed designs for molecular electronic devices and computers. It examines specific potentialmore » applications and the relationship to molecular electronics to silicon technology and presents the first published survey of experts on research issues, applications, and forecast of future developments and also includes market forecast. An interesting suggestion of the survey is that the chemical industry may become a significant factor in the computer industry as the sixth generation unfolds.« less

Photonics applications and web engineering: WILGA Winter 2016

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.

2016-09-01

Since twenty years, young researchers form the Institute of Electronic Systems, Warsaw University of Technology, organize two times a year, under only a marginal supervision of the senior faculty members, under the patronage of WEiTI PW, KEiT PAN, SPIE, IEEE, PKOpto SEP and PSF, the WILGA Symposium on advanced, integrated functional electronic, photonic and mechatronic systems [1-5]. All aspects are considered like: research and development, theory and design, technology - material and construction, software and hardware, commissioning and tests, as well as pilot and practical applications. The applications concern mostly, which turned after several years to be a proud specialization of the WILGA Symposium, Internet engineering, high energy physics experiments, new power industry including fusion, nuclear industry, space and satellite technologies, telecommunications, smart municipal environment, as well as biology and medicine [6-8]. XXXVIIth WILGA Symposium was held on 29-31 January 2016 and gathered a few tens of young researchers active in the mentioned research areas. There were presented a few tens of technical papers which will be published in Proc.SPIE together with the accepted articles from the Summer Edition of the WILGA Symposium scheduled for 29.05-06.06.2016. This article is a digest of chosen presentations from WILGA Symposium 2016 Winter Edition. The survey is narrowed to a few chosen and main topical tracks, like electronics and photonics design using industrial standards like ATCA/MTCA, also particular designs of functional systems using this series of industrial standards. The paper, summarizing traditionally since many years the accomplished WILGA Symposium organized by young researchers from Warsaw University of Technology, is also the following part of a cycle of papers concerning their participation in design of new generations of electronic systems used in discovery experiments in Poland and in leading research laboratories of the world.

The automotive battery of the future—the role of electronics

NASA Astrophysics Data System (ADS)

Kellaway, M. J.

The automotive battery is being asked to carry out more challenging duties than ever before. Many of these duties are a result of new types of electrical load. The way in which a battery is operated and managed within a vehicle can be optimized significantly through the use of battery-related electronics with embedded software. Potential benefits include extended life, early warning of deterioration and failure, greater availability and an improved match to the vehicle's requirements. The impact of electronics in other areas shows that there is considerable potential to go much further in this direction with battery systems. There are, however, important system-wide issues to be considered. The battery system must conform to a wide range of standards and practices applicable to automotive electronic systems and embedded software. The automotive industry is itself trying to come to terms with the inherent difficulties involved in developing, qualifying and upgrading complex networks of software-based controllers within the vehicle. The battery system must be compatible with the results of these initiatives. Cost will always be a major influence, but the cost model is different from that familiar to battery producers. This study outlines the main areas where the battery industry must consider a change from being a component to a system supplier, and makes some recommendations for an industry wide approach to smooth the transition.

Electron transport chains of lactic acid bacteria - walking on crutches is part of their lifestyle

PubMed Central

Brooijmans, Rob; Hugenholtz, Jeroen

2009-01-01

A variety of lactic acid bacteria contain rudimentary electron transport chains that can be reconstituted by the addition of heme and menaquinone to the growth medium. These activated electron transport chains lead to higher biomass production and increased robustness, which is beneficial for industrial applications, but a major concern when dealing with pathogenic lactic acid bacteria. PMID:20948651

Reflections and Conclusions on the Work Developed by the Group of Teaching Innovation in Electronics at the University of Valladolid

ERIC Educational Resources Information Center

Herrero, Luis Carlos; Pardo, Fernando; Fernando, María Luisa; González, María Luisa

2011-01-01

We hereby present the main conclusions and perspectives obtained by the Group of Teaching Innovation in Electronics (Grupo de Innovación Docente en Electrónica, GIDEN) of the University of Valladolid (UVa) with regard to its main areas of work. This group comprises teachers of the "Specialty in Industrial Electronics" degree, and the…

Electronic Tongue for Quantitation of Contaminants in Water

NASA Technical Reports Server (NTRS)

Buehler, Marlin; Kuhlman, Gregory

2004-01-01

An assembly of sensors, denoted an electronic tongue, is undergoing development as a prototype of compact devices for use in measuring concentrations of contaminants in water. Thus far, the electronic tongue has been tested on ions of Cu, Zn, Pb, and Fe and shown to respond to concentrations as low as about 10 parts per million. This electronic tongue is expected to be capable of measuring concentrations of other metal ions and organic compounds. Potential uses for electronic tongues include monitoring the chemical quality of water in a variety of natural, industrial, and laboratory settings; detecting micro-organisms indirectly by measuring microbially influenced corrosion; and characterizing compounds of interest to the pharmaceutical and food industries. This version of the electronic tongue includes a heater, a temperature sensor, an array of ion-specific electrodes, an oxidation/ reduction sensor pair, an electrical-conductivity sensor, and an array of galvanic cells, all on one compact ceramic substrate. Special-purpose electronic excitation and readout circuitry for the sensors has also been constructed. The main advantage of the electronic tongue, relative to electrodes of this type used traditionally to assess water quality, is extreme ruggedness. The types of measurements that can be performed by use of the sensors on the electronic tongue are quite varied. The best combination of types of measurements for a given application depends on the specific contaminants that one seeks to detect. Experimental studies to identify such combinations were in progress at the time of reporting the information for this article.

Electronic Data Interchange: Selected Issues and Trends.

ERIC Educational Resources Information Center

Wigand, Rolf T.; And Others

1993-01-01

Describes electronic data interchange (EDI) as the application-to-application exchange of business documents in a computer-readable format. Topics discussed include EDI in various industries, EDI in finance and banking, organizational impacts of EDI, future EDI markets and organizations, and implications for information resources management.…

78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... engine and engine parts manufacturing,'' ``Motor vehicle electrical and electronic equipment... manufacturing,'' ``Other motor vehicle electrical and electronic equipment manufacturing,'' and ``All other motor vehicle parts manufacturing'' in the second column from the list of required NAICS codes for the...

The Road Ahead: State of the Industry 2001.

ERIC Educational Resources Information Center

Kiser, Kim

2001-01-01

Presents results of a survey of electronic learning that investigated how organizations are using electronic learning, the technology being used to deliver it, and whether it's helping to accomplish goals. Highlights include convenience; learning management systems; use of technology for training; satisfaction; effectiveness; support and spending;…

Japanese power electronics inverter technology and its impact on the American air conditioning industry

NASA Astrophysics Data System (ADS)

Ushimaru, Kenji

1990-08-01

Since 1983, technological advances and market growth of inverter-driven variable-speed heat pumps in Japan have been dramatic. The high level of market penetration was promoted by a combination of political, economic, and trade policies in Japan. A unique environment was created in which the leading domestic industries, microprocessor manufacturing, compressors for air conditioning and refrigerators, and power electronic devices, were able to direct the development and market success of inverter-driven heat pumps. As a result, leading U.S. variable-speed heat pump manufacturers should expect a challenge from the Japanese producers of power devices and microprocessors. Because of the vertically-integrated production structure in Japan, in contrast to the out-sourcing culture of the United States, price competition at the component level (such as inverters, sensors, and controls) may impact the structure of the industry more severely than final product sales.

2 MeV linear accelerator for industrial applications

NASA Astrophysics Data System (ADS)

Smith, Richard R.; Farrell, Sherman R.

1997-02-01

RPC Industries has developed a high average power scanned electron beam linac system for medium energy industrial processing, such as in-line sterilization. The parameters are: electron energy 2 MeV; average beam current 5.0 mA; and scanned width 0.5 meters. The control system features data logging and a Man-Machine Interface system. The accelerator is vertically mounted, the system height above the floor is 3.4 m, and the footprint is 0.9×1.2 meter2. The typical processing cell inside dimensions are 3.0 m by 3.5 m by 4.2 m high with concrete side walls 0.5 m thick above ground level. The equal exit depth dose is 0.73 gm cm-2. Additional topics that will be reported are: throughput, measurements of dose vs depth, dose uniformity across the web, and beam power by calorimeter and magnetic deflection of the beam.

75 FR 58363 - Notice of Petitions by Firms for Determination of Eligibility to Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

..., Inc 6550 Wedgwood Road, 09/13/10 The firm manufactures Maple Grove, MN 55311- electronic integrated.... Genplex, Inc 7 Industrial Park Road, 09/14/10 The firm manufactures Skowhegan, ME 04976. extruded plastic... and decorated apparel utilizing custom industrial sewing, RF welding, embroidery and silk screen...

The Training and Technology Project Experimental Research Program for Vocational-Technical Teachers. Final Report.

ERIC Educational Resources Information Center

Merrill, E.L.; Russell, Wendell H.

Over a 31-month period from June 1966 to December 1968, the University of Tennessee and Union Carbide Corporation conducted preservice and inservice institutes for 160 industrial education teachers. These institutes carried college credit and covered Mechanical Technology and Drafting, Industrial Electronics Technology, Machine Shop and…

77 FR 32124 - Guidance for Industry on Irritable Bowel Syndrome-Clinical Evaluation of Drugs for Treatment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

... sign or symptom recurrence. The section on trial endpoints was modified to note that a drug can be...] Guidance for Industry on Irritable Bowel Syndrome--Clinical Evaluation of Drugs for Treatment; Availability...: Submit either electronic or written comments on Agency guidances at any time. ADDRESSES: Submit written...

The Internet's impact on EDI.

PubMed

Cummings, D; Kennedy, R; Moore, C

1997-01-01

Explosive growth of the Internet in a number of industries has created an information distribution channel that is likely to alter and leverage every aspect of electronic commerce. With the levels of IS integration and technological innovations in development in healthcare today, it is not unreasonable to predict that this industry soon will be similarly driven.

Working for America. Career Schools: A Tremendous Resource for Employers.

ERIC Educational Resources Information Center

Career Education, 1992

1992-01-01

Discusses industries that are vital to the nation's economy and the numbers of skilled workers they will need to keep moving ahead. Industries profiled are aviation, automotive, allied health, trucking, paralegal, electronics, and computer-aided drafting. Also looks at proprietary schools that are educating the work force of the future. (JOW)

78 FR 28228 - Guidance for Industry and Food and Drug Administration Staff on Best Practices for Conducting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0057] Guidance for Industry and Food and Drug Administration Staff on Best Practices for Conducting and Reporting Pharmacoepidemiologic Safety Studies Using Electronic Healthcare Data; Availability AGENCY: Food and Drug Administration...

76 FR 82303 - Draft Guidance for Industry on Responding to Unsolicited Requests for Off-Label Information About...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... indication and risk information, post-marketing submission requirements) in their internet and social media... requests for off-label information, including those that firms may encounter on emerging electronic media...] Draft Guidance for Industry on Responding to Unsolicited Requests for Off-Label Information About...

Using ITS to Create an Insurance Industry Application: A Joint Case Study.

ERIC Educational Resources Information Center

Boies, Stephen J.; And Others

1993-01-01

Presents an empirical case study of the use of ITS, a software development environment designed by IBM, by Continental Insurance for underwriting applications. Use of a rule-based user interface style that made electronic forms look like standard insurance industry paper forms and worked according to Continental's guidelines is described.…

Critical Factors That Influence the Success of Cultivating Seed Teachers in Environmental Education

ERIC Educational Resources Information Center

Hsueh, Sung-Lin; Su, Fu-Long

2016-01-01

Taiwan is a densely populated industrialized country with high-polluting industries. In particular, petrochemical, steel, thermal power, and electronics plants consume a high level of energy. Furthermore, vehicle exhaust emissions are a major contributor to pollution. Collectively, these problems have resulted in high levels of greenhouse gas…

78 FR 74154 - Draft Guidance for Industry on Recommendations for Preparation and Submission of Animal Food...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-0928] Draft Guidance for Industry on Recommendations for Preparation and Submission of Animal Food Additive... Preparation and Submission of Animal Food Additive Petitions.'' DATES: Submit either electronic or written...

A Supplementary Program for Environmental Education, Industrial Arts, Grade 9-12.

ERIC Educational Resources Information Center

Warpinski, Robert

Presented in this teacher's guide for grades 7-12 are lessons plans and ideas for integrating industrial arts (power mechanics, graphic arts, plastics, and electricity/electronics) and environmental education. Each lesson originates with a fundamental concept pertaining to the environment and states, in addition, its discipline area, subject area,…

INSTRUCTIONAL GUIDE FOR ELECTRICITY, JUNIOR HIGH SCHOOL INDUSTRIAL ARTS.

ERIC Educational Resources Information Center

GOLDSMITH, J. LYMAN

THIS GUIDE IS DESIGNED TO PROVIDE A PRACTICAL REFERENCE FOR TEACHERS PLANNING INSTRUCTION CONCERNING ELECTRICITY IN JUNIOR HIGH SCHOOL INDUSTRIAL ARTS CLASSES. THE GUIDE IS FOR A 10-WEEK COURSE DESIGNED TO PROVIDE THE STUDENT WITH EXPLORATORY EXPERIENCES INVOLVING THE BASIC PRINCIPLES AND APPLICATIONS OF ELECTRICITY AND ELECTRONICS. THE PROPER USE…

Use of aquatic macrophytes in treating electronics manufacturing wastewater in Guadalajara, Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leslie, C.I.; Jackson, J.D.

1996-12-31

This paper discusses an industrial wastewater treatment project performed by Kleinfelder Mexico for an electronics manufacturer located in Guadalajara, Mexico. The industrial wastewater had a moderately high concentration of biochemical oxygen demand (BOD), total suspended solids (TSS), and grease and oil. Metals concentration was low, with only zinc exceeding regulatory standards. The use of aquatic macrophytes (namely Eichhornia crassipes) was considered along with conventional wastewater treatment options. An aquatic macrophyte wastewater treatment system was found to have numerous advantages over a conventional extended aeration package plant. These advantages include less required capital, an appreciation of investment, and lower operations andmore » maintenance costs.« less

Treatment of silica effluents: ultrafiltration or coagulation-decantation.

PubMed

Ndiaye, P I; Moulin, P; Dominguez, L; Millet, J C; Charbit, F

2004-12-10

In the electronics industry, the preparation of silicon plates generates effluents that contain a great amount of colloidal silica. Two processes--decantation and ultrafiltration--are studied with in view the treatment of the effluents released by the firm Rockwood Electronic Materials. The feasibility of each of the two processes is studied separately and their operating parameters optimized. Both processes allow the recovery of a great proportion of the initial effluent (over 89%) as transparent and colorless water that can be reused at the start of a line. In view of the results and of the compared advantages and disadvantages of the two processes, ultrafiltration will be selected for the industrial unit.

Towards realization of quantitative atmospheric and industrial gas sensing using THz wave electronics

NASA Astrophysics Data System (ADS)

Tekawade, Aniket; Rice, Timothy E.; Oehlschlaeger, Matthew A.; Mansha, Muhammad Waleed; Wu, Kefei; Hella, Mona M.; Wilke, Ingrid

2018-06-01

The potential of THz wave electronics for miniaturized non-intrusive sensors for atmospheric, environmental, and industrial gases is explored. A THz wave spectrometer is developed using a radio-frequency multiplier source and a Schottky-diode detector. Spectral absorption measurements were made in a gas cell within a frequency range of 220-330 GHz at room temperature and subatmospheric pressures. Measurements are reported for pure acetonitrile (CH3CN), methanol (CH3OH), and ethanol (C2H5OH) vapors at 5 and 10 Torr and for methanol dilute in the air (0.75-3.0 mol%) at a pressure of 500 Torr. An absorbance noise floor of 10-3 was achieved for a single 10 s scan of the 220-330 GHz frequency domain. Measured absorption spectra for methanol/air agree well at collisional-broadened conditions with spectral simulations carried out using literature spectroscopic parameters. In contrast to the previous submillimeter wave research that has focused on spectral absorbance at extremely low pressures (mTorr), where transitions are in the Doppler limit, and the present study illustrates the applicability of THz electronics for gas sensing at pressures approaching those found in atmospheric and industrial environments.

Commentary: Forces That Drive the Vape Shop Industry and Implications for the Health Professions.

PubMed

Sussman, Steve; Baezconde-Garbanati, Lourdes; Garcia, Robert; Barker, Dianne C; Samet, Jonathan M; Leventhal, Adam; Unger, Jennifer B

2016-09-01

At least three factors may be driving the evolution of the vape shop industry, a rapidly growing market sector that specializes in the sales of electronic cigarettes: (1) the tobacco industry, (2) the public health sector and its diverse stakeholders, and (3) consumer demand. These influences and the responses of the vape shop sector have resulted in a rapidly changing landscape. This commentary briefly discusses these three factors and the implications for the health professions, as they address the vape shop industry and its consequences for public health. © The Author(s) 2015.

Commentary: Forces That Drive the Vape Shop Industry and Implications for the Health Professions

PubMed Central

Sussman, Steve; Baezconde-Garbanati, Lourdes; Garcia, Robert; Barker, Dianne C.; Samet, Jonathan M.; Leventhal, Adam; Unger, Jennifer B.

2016-01-01

At least three factors may be driving the evolution of the vape shop industry, a rapidly growing market sector that specializes in the sales of electronic cigarettes: (1) the tobacco industry, (2) the public health sector and its diverse stakeholders, and (3) consumer demand. These influences and the responses of the vape shop sector have resulted in a rapidly changing landscape. This commentary briefly discusses these three factors and the implications for the health professions, as they address the vape shop industry and its consequences for public health. PMID:25967071

Tips and Tricks of Incorporating Industry Standards into a Library Collection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbott, Jennifer; Sandberg, Tami

Professional literature on the incorporation of industry standards into a library collection is somewhat limited. The objective of this presentation is to discuss the intricate details of acquiring, managing, and delivering electronic industry standards to library patrons in a seamless manner. Lessons learned regarding vendor selection and license agreements will also be discussed. Results from a survey administer at the National Renewable Energy Laboratory will be used to analyze how collection policies can properly be developed to incorporate industry standards into a library setting. The key points of acquisition decisions, avoidance of liability issues, and cost will be addressed.

NASA Tech Briefs, October 1995. Volume 19, No. 10

NASA Technical Reports Server (NTRS)

1995-01-01

A special focus in this issue is Data acquisition and analysis. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. Also included in this issue are Laser Tech Briefs and Industry Focus: Motion Control/ Positioning Equipment

Financing the Electronic Library: Models and Options.

ERIC Educational Resources Information Center

Waters, Richard L.; Kralisz, Victor Frank

1981-01-01

Places the cost considerations associated with public library automation in a framework of public finance comfortable to most administrators, discusses the importance of experience with use patterns in the electronic library in opening up new and innovative financing methods, and stresses the role of the library in the information industry. (JL)

IMPACT OF OFFICE AUTOMATION IN THE INSURANCE INDUSTRY.

ERIC Educational Resources Information Center

FREEDMAN, AUDREY; AND OTHERS

THE EXTENT AND PACE OF THE ADOPTION OF ELECTRONIC DATA PROCESSING TECHNOLOGY AMONG INSURANCE CARRIERS AND ITS EFFECTS ON INSURANCE OFFICE EMPLOYEES WERE STUDIED. QUESTIONNAIRE RESPONSES FROM 410 FIRMS, REPRESENTING ABOUT 89 PERCENT OF ALL INSURANCE CARRIER EMPLOYMENT, IDENTIFIED 305 FIRMS WITH ELECTRONIC DATA PROCESSING. OF THESE, 81 PERCENT…

CVISN electronic credentialing for commercial vehicles in Washington State, a case study : easier licensing and credentials processing for the motor carrier industry

DOT National Transportation Integrated Search

2004-09-01

The following case study provides an in-depth view of the deployment of Commercial Vehicle Information Systems and Networks (CVISN) Electronic Credentialing in Washington State. It describes successful practices and lessons learned in operations and ...

15 CFR 748.7 - Applying electronically for a license or Classification request.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Applying electronically for a license or Classification request. 748.7 Section 748.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT...

Syllabus in Trade Electricity-Electronics. Section II. Trade Electricity.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational Education Curriculum Development.

This second section of a three-part syllabus for a flexible curriculum in trade electricity-electronics contains four semi-independent units: (1) Advanced Electricity, (2) Residential and Commercial Wiring, (3) Industrial Electricity, and (4) Motor Controls. Introductory sections describe development of the curriculum, outline the total trade…

Legislation: Legislation and Regulations Affecting Libraries in 2002; Legislation and Regulations Affecting Publishing in 2002.

ERIC Educational Resources Information Center

Sheketoff, Emily; Costabile, Mary R.; Adler, Allan

2003-01-01

Reviews legislation and regulations affecting libraries and the publishing industry, including the Museum and Library Services Act; Office of Educational Research and Improvement (OERI); copyright; access to electronic government information; telecommunications and technology; electronic surveillance and privacy, including the USA Patriot Act;…

Teaching Technical Report Writing

ERIC Educational Resources Information Center

De Pasquale, Joseph A.

1977-01-01

A high school electronics teacher describes the integration of technical report writing in the electronics program for trade and industrial students. He notes that the report writing rather than just recording data seemed to improve student laboratory experience but further improvements in the program are needed. A sample lab report is included.…

The Skills Implications of Electronic Retailing. IES Final Report.

ERIC Educational Resources Information Center

Tackey, Nii Djan; Hillage, Jim; Jagger, Nick; Bates, Peter

The skills and education/training implications of the development of electronic commerce in the United Kingdom's retail industry and its associated supply chain were examined. The major data collection activities were as follows: a literature review; consultation with leading academics and advisers; an e-mail-based call for information from…

Math for Success in Electronics. Instructor's Guide. Reference Manual.

ERIC Educational Resources Information Center

DeVantier, Connie; And Others

This document contains both an instructor's guide and a reference manual. It was developed as part of a cooperative venture between Industrial Technology Institute (ITI), Wayne County (Michigan) Community College, and Great Lakes Steel (GLS). The instructor's guide has four sections: math for success in electronics, student materials, electronics…

78 FR 13069 - Draft Guidance for Industry: Recommendations for Screening, Testing, and, Management of Blood...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... components, including Source Plasma. The guidance announced in this notice replaces the draft guidance... before it begins work on the final version of the guidance, submit either electronic or written comments... the SUPPLEMENTARY INFORMATION section for electronic access to the draft guidance document. Submit...

E-Portfolios Come of Age

ERIC Educational Resources Information Center

Waters, John K.

2009-01-01

Industry analysts say the systems have reached a mature adolescence, having grown from mere electronic filing cabinets into multimedia platforms that can operate with a variety of e-learning tools. Their fullest potential still lies ahead. This article talks about electronic portfolios--better known as e-portfolios, and how e-portfolios are taking…

Evaluation of an electronic nose for improved biosolids alkaline-stabilization treatment and odor management

USDA-ARS?s Scientific Manuscript database

Electronic nose sensors are designed to detect differences in complex air sample matrices. For example, they have been used in the food industry to monitor process performance and quality control. However, no information is available on the application of sensor arrays to monitor process performanc...

77 FR 13061 - Electronic Reporting of Toxics Release Inventory Data

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...--Reporting Year SIC--Standard Industrial Code TRI--Toxics Release Inventory TRI-ME--TRI-Made Easy Desktop... EPA to ``publish a uniform toxic chemical release form for facilities covered'' by the TRI Program. 42... practicable. Similarly, EPA's Cross-Media Electronic Reporting Regulation (CROMERR) (40 CFR Part 3), published...

Curriculum Guide for Electricity-Electronics.

ERIC Educational Resources Information Center

Oregon State Board of Education, Salem. Div. of Community Colleges and Career Education.

Developed through a cooperative effort by industry and education, this curriculum guide outlines the basic skills and knowledge necessary for entry-level competencies in the broad field of electricity-electronics, or for entrance into an apprenticeship, post-high school, or university program. This guide is one of several developed for Oregon's…

Electronic Devices and Systems. Energy Technology Series.

ERIC Educational Resources Information Center

Technical Education Research Centre-Southwest, Waco, TX.

This course in electronic devices and systems is one of 16 courses in the Energy Technology Series developed for an Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in…

Toward Enhancing the Social Benefits of Electronic Publishing. Report of an Aspen Institute Planning Meeting (Queenstown, Maryland, February 25-26, 1987). Communications and Society Forum Report #1.

ERIC Educational Resources Information Center

Rice, Michael

Intended to investigate ways in which electronic publishing might be further developed to serve important consumer needs and social interests that have yet to become a focus for the industry, this two-day planning meeting consisted of roundtable discussions with 16 electronic publishing experts and practitioners. Following a presentation of the…

Commercialization of an S-band standing-wave electron accelerator for industrial applications

NASA Astrophysics Data System (ADS)

Moon, Jin-Hyeok; Kwak, Gyeong-Il; Han, Jae-Ik; Lee, Gyu-Baek; Jeon, Seong-Hwan; Kim, Jae-Young; Hwang, Cheol-Bin; Lee, Gi-Yong; Kim, Young-Man; Park, Sung-Ju

2016-09-01

An electron accelerator system has been developed for use in industrial, as well as possible medical, applications. Based on our experiences achieved during prototype system development and various electron beam acceleration tests, we have built a stable and compact system for sales purposes. We have integrated a self-developed accelerating cavity, an E-gun pulse driver, a radio-frequency (RF) power system, a vacuum system, a cooling system, etc. into a frame with a size of 1800 × 1000 × 1500 mm3. The accelerating structure is a side-coupled standing-wave type operating in the π/2 mode (tuned to~3 GHz). The RF power is provided by using a magnetron driven by a solid-state modulator. The electron gun is a triode type with a dispenser cathode (diameter of 11 mm). The system is capable of delivering a maximum 900-W average electron beam power with tight focusing at the target. Until now, we have performed various electron beam tests and X-ray beam tests after having built the system, have completed the beam assessment for commercializations, and have been preparing full-fledged sales activity. This article reports on our system development processes and on some of our early test results for commercializations.

Development of a prediction model on the acceptance of electronic laboratory notebooks in academic environments.

PubMed

Kloeckner, Frederik; Farkas, Robert; Franken, Tobias; Schmitz-Rode, Thomas

2014-04-01

Documentation of research data plays a key role in the biomedical engineering innovation processes. It makes an important contribution to the protection of intellectual property, the traceability of results and fulfilling the regulatory requirement. Because of the increasing digitalization in laboratories, an electronic alternative to the commonly-used paper-bound notebooks could contribute to the production of sophisticated documentation. However, compared to in an industrial environment, the use of electronic laboratory notebooks is not widespread in academic laboratories. Little is known about the acceptance of an electronic documentation system and the underlying reasons for this. Thus, this paper aims to establish a prediction model on the potential preference and acceptance of scientists either for paper-based or electronic documentation. The underlying data for the analysis originate from an online survey of 101 scientists in industrial, academic and clinical environments. Various parameters were analyzed to identify crucial factors for the system preference using binary logistic regression. The analysis showed significant dependency between the documentation system preference and the supposed workload associated with the documentation system (p<0.006; odds ratio=58.543) and an additional personal component. Because of the dependency of system choice on specific parameters it is possible to predict the acceptance of an electronic laboratory notebook before implementation.

Short-range contacts govern the performance of industry-relevant battery cathodes

NASA Astrophysics Data System (ADS)

Morelly, Samantha L.; Alvarez, Nicolas J.; Tang, Maureen H.

2018-05-01

Fundamental understanding of how processing affects composite battery electrode structure and performance is still lacking, especially for industry-relevant electrodes with low fractions of inactive material. This work combines rheology, electronic conductivity measurements, and battery rate capability tests to prove that short-range electronic contacts are more important to cathode rate capability than either ion transport or long-range electronic conductivity. LiNi0.33Mn0.33Co0.33O2, carbon black, and polyvinylidene difluoride in 1-methyl-2-pyrrolidinone represent a typical commercial electrode with <5.5 wt% inactive material. Dry-mixing carbon black with active material decreases the relative fraction of bulk (free) carbon, as shown by small angle oscillatory shear and microscopy. More free carbon leads to a stronger gel network (more long-range particle contacts) and higher electronic conductivity of the dried films. Improvements in battery rate capability at constant electrode porosity do not correlate to electronic conductivity, but rather show an optimum fraction of free carbon. Simple comparison of rate capability in electrodes with increased total carbon loading (3 wt%) shows improvement for all fractions of free carbon. These results clearly indicate that ion transport cannot be limiting and highlight the critical importance of short-range electronic contacts for controlling battery performance.

A strategy for electronic dissemination of NASA Langley technical publications

NASA Technical Reports Server (NTRS)

Roper, Donna G.; Mccaskill, Mary K.; Holland, Scott D.; Walsh, Joanne L.; Nelson, Michael L.; Adkins, Susan L.; Ambur, Manjula Y.; Campbell, Bryan A.

1994-01-01

To demonstrate NASA Langley Research Center's relevance and to transfer technology to external customers in a timely and efficient manner, Langley has formed a working group to study and recommend a course of action for the electronic dissemination of technical reports (EDTR). The working group identified electronic report requirements (e.g., accessibility, file format, search requirements) of customers in U.S. industry through numerous site visits and personal contacts. Internal surveys were also used to determine commonalities in document preparation methods. From these surveys, a set of requirements for an electronic dissemination system was developed. Two candidate systems were identified and evaluated against the set of requirements: the Full-Text Electronic Documents System (FEDS), which is a full-text retrieval system based on the commercial document management package Interleaf, and the Langley Technical Report Server (LTRS), which is a Langley-developed system based on the publicly available World Wide Web (WWW) software system. Factors that led to the selection of LTRS as the vehicle for electronic dissemination included searching and viewing capability, current system operability, and client software availability for multiple platforms at no cost to industry. This report includes the survey results, evaluations, a description of the LTRS architecture, recommended policy statement, and suggestions for future implementations.

Security Techniques for the Electronic Health Records.

PubMed

Kruse, Clemens Scott; Smith, Brenna; Vanderlinden, Hannah; Nealand, Alexandra

2017-08-01

The privacy of patients and the security of their information is the most imperative barrier to entry when considering the adoption of electronic health records in the healthcare industry. Considering current legal regulations, this review seeks to analyze and discuss prominent security techniques for healthcare organizations seeking to adopt a secure electronic health records system. Additionally, the researchers sought to establish a foundation for further research for security in the healthcare industry. The researchers utilized the Texas State University Library to gain access to three online databases: PubMed (MEDLINE), CINAHL, and ProQuest Nursing and Allied Health Source. These sources were used to conduct searches on literature concerning security of electronic health records containing several inclusion and exclusion criteria. Researchers collected and analyzed 25 journals and reviews discussing security of electronic health records, 20 of which mentioned specific security methods and techniques. The most frequently mentioned security measures and techniques are categorized into three themes: administrative, physical, and technical safeguards. The sensitive nature of the information contained within electronic health records has prompted the need for advanced security techniques that are able to put these worries at ease. It is imperative for security techniques to cover the vast threats that are present across the three pillars of healthcare.

Industrial energy-efficiency improvement program

NASA Astrophysics Data System (ADS)

1980-12-01

The industrial energy efficiency improvement program to accelerate market penetration of new and emerging industrial technologies is described. Practices which will improve energy efficiency, encourage substitution of more plentiful domestic fuels, and enhance recovery of energy and materials from industrial waste streams are enumerated. Specific reports from the chemicals and allied products; primary metals; petroleum and coal products; stone, clay, and glass, paper and allied products; food and kindred products; fabricated metals; transportation equipment; machinery (except electrical); textile mill products; rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products are discussed. A summary on progress in the utilization of recovered materials, and an analysis of industrial fuel mix is presented.

Chlorinated and parent polycyclic aromatic hydrocarbons in environmental samples from an electronic waste recycling facility and a chemical industrial complex in China.

PubMed

Ma, Jing; Horii, Yuichi; Cheng, Jinping; Wang, Wenhua; Wu, Qian; Ohura, Takeshi; Kannan, Kurunthachalam

2009-02-01

Chlorinated polycyclic aromatic hydrocarbons (CIPAHs) are a class of halogenated contaminants found in the urban atmosphere; they have toxic potential similar to that of dioxins. Information on the sources of CIPAHs is limited. In this study, concentrations of 20 CIPAHs and 16 parent PAHs were measured in electronic wastes, workshop-floor dust, vegetation, and surface soil collected from the vicinity of an electronic waste (e-waste) recycling facility and in surface soil from a chemical industrial complex (comprising a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant), and agricultural areas in central and eastern China. High concentrations of SigmaCIPAHs were found in floor dust (mean, 103 ng/g dry wt), followed in order of decreasing concentration by leaves (87.5 ng/g drywt), electronic shredder waste (59.1 ng/g dry wt), and soil (26.8 ng/g dry wt) from an e-waste recycling facility in Taizhou. The mean concentration of SigmaCIPAHs in soil from the chemical industrial complex (88 ng/g dry wt) was approximately 3-fold higher than the concentration in soil from e-waste recycling facilities. The soils from e-waste sites and industrial areas contained mean concentrations of SigmaCIPAHs 2 to 3 orders of magnitude higher than the concentrations in agricultural soils (ND-0.76 ng/g), suggesting that e-waste recycling and chlorine-chemical industries are potential emission sources of CIPAHs. The profiles of CIPAHs in soil and dust were similar to a profile that has been reported previously for fly ash from municipal solid waste incinerators (6-CIBaP was the predominant compound), but the profiles in vegetation and electronic shredder waste were different from those found in fly ash. Concentrations of 16 parent PAHs were high (150-49,700 ng/g) in samples collected from the e-waste recycling facility. Significant correlation between SigmaCIPAH and SigmaPAH concentrations suggests that direct chlorination of parent PAHs is the major pathway of formation of CIPAHs during e-waste recycling operations. Dioxin-like toxic equivalency quotients (TEQs) for CIPAHs and PAHs in samples were calculated on the basis of relative potencies reported for CIPAHs and PAHs. The highest mean TEQ concentrations of CIPAHs (518 pg-TEQ/g) were found for workshop-floor dust, followed by leaves (361 pg-TEQ/g), electronic shredder waste (308 pg-TEQ/g), soil from the chemical industrial complex (146 pg-TEQ/g), and soil from the sites of the e-waste recycling facility (92.3 pg-TEQ/g). With one exception, the floor dust samples, the TEQ concentrations of CIPAHs found in multiple environmental matrices in this study were higher than the TEQ concentrations of PCDD/Fs in the same samples reported in our earlier study.

Water pollutant fingerprinting tracks recent industrial transfer from coastal to inland China: A case study

PubMed Central

Zheng, Weiwei; Wang, Xia; Tian, Dajun; Jiang, Songhui; Andersen, Melvin E.; He, Genhsjeng; Crabbe, M. James C.; Zheng, Yuxin; Zhong, Yang; Qu, Weidong

2013-01-01

In recent years, China’s developed regions have transferred industries to undeveloped regions. Large numbers of unlicensed or unregistered enterprises are widespread in these undeveloped regions and they are subject to minimal regulation. Current methods for tracing industrial transfers in these areas, based on enterprise registration information or economic surveys, do not work. We have developed an analytical framework combining water fingerprinting and evolutionary analysis to trace the pollution transfer features between water sources. We collected samples in Eastern China (industrial export) and Central China (industrial acceptance) separately from two water systems. Based on the water pollutant fingerprints and evolutionary trees, we traced the pollution transfer associated with industrial transfer between the two areas. The results are consistent with four episodes of industrial transfers over the past decade. Our results also show likely types of the transferred industries - electronics, plastics, and biomedicines - that contribute to the water pollution transfer. PMID:23301152

Economic Aspects of the Chemical Industry

NASA Astrophysics Data System (ADS)

Koleske, Joseph V.

Within the formal disciplines of science at traditional universities, through the years, chemistry has grown to have a unique status because of its close correspondence with an industry and with a branch of engineering—the chemical industry and chemical engineering. There is no biology industry, but aspects of biology have closely related disciplines such as fish raising and other aquaculture, animal cloning and other facets of agriculture, ethical drugs of pharmaceutical manufacture, genomics, water quality and conservation, and the like. Although there is no physics industry, there are power generation, electricity, computers, optics, magnetic media, and electronics that exist as industries. However, in the case of chemistry, there is a named industry. This unusual correspondence no doubt came about because in the chemical industry one makes things from raw materials—chemicals—and the science, manufacture, and use of chemicals grew up together during the past century or so.

Water pollutant fingerprinting tracks recent industrial transfer from coastal to inland China: A case study

NASA Astrophysics Data System (ADS)

Zheng, Weiwei; Wang, Xia; Tian, Dajun; Jiang, Songhui; Andersen, Melvin E.; He, Genhsjeng; Crabbe, M. James C.; Zheng, Yuxin; Zhong, Yang; Qu, Weidong

2013-01-01

In recent years, China's developed regions have transferred industries to undeveloped regions. Large numbers of unlicensed or unregistered enterprises are widespread in these undeveloped regions and they are subject to minimal regulation. Current methods for tracing industrial transfers in these areas, based on enterprise registration information or economic surveys, do not work. We have developed an analytical framework combining water fingerprinting and evolutionary analysis to trace the pollution transfer features between water sources. We collected samples in Eastern China (industrial export) and Central China (industrial acceptance) separately from two water systems. Based on the water pollutant fingerprints and evolutionary trees, we traced the pollution transfer associated with industrial transfer between the two areas. The results are consistent with four episodes of industrial transfers over the past decade. Our results also show likely types of the transferred industries - electronics, plastics, and biomedicines - that contribute to the water pollution transfer.

Occurrence of halogenated flame retardants in sediment off an urbanized coastal zone: association with urbanization and industrialization.

PubMed

Liu, Hui-Hui; Hu, Yuan-Jie; Luo, Pei; Bao, Lian-Jun; Qiu, Jian-Wen; Leung, Kenneth M Y; Zeng, Eddy Y

2014-01-01

To examine the impacts of urbanization and industrialization on the coastal environment, sediment samples were collected from an urbanized coastal zone (i.e., Daya Bay and Hong Kong waters of South China) and analyzed for 20 polybrominated diphenyl ethers (PBDEs) and 10 alternative halogenated flame retardants (AHFRs). The sum concentration of PBDEs was in the range of 1.7-55 (mean: 17) ng g(-1), suggesting a moderate pollution level compared to the global range. The higher fractions of AHFRs (i.e., TBB+TBPH, BTBPE and DBDPE) than those of legacy PBDEs (i.e., penta-BDE, octa-BDE and deca-BDE) corresponded with the phasing out of PBDEs and increasing demand for AHFRs. Heavy contamination occurred at the estuary of Dan'ao River flowing through the Daya Bay Economic Zone, home to a variety of petrochemicals and electronics manufacturing facilities. The concentrations of HFRs in surface sediments of Hong Kong were the highest in Victoria Harbor, which receives around 1.4 million tons of primarily treated sewage daily, and a good relationship (r(2) = 0.80; p < 0.0001) between the HFR concentration and population density in each council district was observed, highlighting the effect of urbanization. Moreover, the AHFR concentrations were significantly correlated (r(2) > 0.73; p < 0.05) with the production volume of electronic devices, production value of electronic industries and population size, demonstrating the importance of industrializing and urbanizing processes in dictating the historical input patterns of AHFRs.

Digital Audio Radio Field Tests

NASA Technical Reports Server (NTRS)

Hollansworth, James E.

1997-01-01

Radio history continues to be made at the NASA Lewis Research Center with the beginning of phase two of Digital Audio Radio testing conducted by the Consumer Electronic Manufacturers Association (a sector of the Electronic Industries Association and the National Radio Systems Committee) and cosponsored by the Electronic Industries Association and the National Association of Broadcasters. The bulk of the field testing of the four systems should be complete by the end of October 1996, with results available soon thereafter. Lewis hosted phase one of the testing process, which included laboratory testing of seven proposed digital audio radio systems and modes (see the following table). Two of the proposed systems operate in two modes, thus making a total of nine systems for testing. These nine systems are divided into the following types of transmission: in-band on channel (IBOC), in-band adjacent channel (IBAC), and new bands - the L-band (1452 to 1492 MHz) and the S-band (2310 to 2360 MHz).

Characterization of newly synthesized pyrimidine derivatives for corrosion inhibition as inferred from computational chemical analysis

NASA Astrophysics Data System (ADS)

El-Taib Heakal, F.; Rizk, S. A.; Elkholy, A. E.

2018-01-01

Corrosion of metallic constructions is a serious problem in most industries worldwide that can be controlled via addition of special chemicals having adsorption capability on metal surfaces and hence isolating it from the aggressive environment. These chemicals are characterized by being rich in functional groups containing free lone pairs of electrons and/or π-electrons. In the present study four newly imidazole-pyrimidine based ionic derivatives have been synthesized and their structures were characterized by means of elemental analysis and different spectroscopic techniques. Quantum chemical calculations were carried out to give insights into the structural and electronic characteristics of these fabricated compounds. Monte Carlo simulation was also applied to shed the light on our prepared corrosion inhibitor molecules by examining their aptitude to adsorb on iron surface. Our ultimate goal is to help industries in fighting corrosion by providing them with a cheap and efficient anti-corrosion molecules.

Electronic Noses and Tongues in Wine Industry

PubMed Central

Rodríguez-Méndez, María L.; De Saja, José A.; González-Antón, Rocio; García-Hernández, Celia; Medina-Plaza, Cristina; García-Cabezón, Cristina; Martín-Pedrosa, Fernando

2016-01-01

The quality of wines is usually evaluated by a sensory panel formed of trained experts or traditional chemical analysis. Over the last few decades, electronic noses (e-noses) and electronic tongues have been developed to determine the quality of foods and beverages. They consist of arrays of sensors with cross-sensitivity, combined with pattern recognition software, which provide a fingerprint of the samples that can be used to discriminate or classify the samples. This holistic approach is inspired by the method used in mammals to recognize food through their senses. They have been widely applied to the analysis of wines, including quality control, aging control, or the detection of fraudulence, among others. In this paper, the current status of research and development in the field of e-noses and tongues applied to the analysis of wines is reviewed. Their potential applications in the wine industry are described. The review ends with a final comment about expected future developments. PMID:27826547

Real-time measurement and monitoring of absorbed dose for electron beams

NASA Astrophysics Data System (ADS)

Korenev, Sergey; Korenev, Ivan; Rumega, Stanislav; Grossman, Leon

2004-09-01

The real-time method and system for measurement and monitoring of absorbed dose for industrial and research electron accelerators is considered in the report. The system was created on the basis of beam parameters method. The main concept of this method consists in the measurement of dissipated kinetic energy of electrons in the irradiated product, determination of number of electrons and mass of irradiated product in the same cell by following calculation of absorbed dose in the cell. The manual and automation systems for dose measurements are described. The systems are acceptable for all types of electron accelerators.

Reading Teacher's Text Selection for Industrial Arts and Other Technical Fields.

ERIC Educational Resources Information Center

Matt, Stephen R.

To provide learners with the most reliable information, individuals and committees responsible for text selection examine texts for classroom use in steps. Since very few people have the specialized knowledge of all the technical fields like drafting, electronics, or graphics that make up the field of Industrial Arts, a committee is required to…

Industry-Oriented Laboratory Development for Mixed-Signal IC Test Education

ERIC Educational Resources Information Center

Hu, J.; Haffner, M.; Yoder, S.; Scott, M.; Reehal, G.; Ismail, M.

2010-01-01

The semiconductor industry is lacking qualified integrated circuit (IC) test engineers to serve in the field of mixed-signal electronics. The absence of mixed-signal IC test education at the collegiate level is cited as one of the main sources for this problem. In response to this situation, the Department of Electrical and Computer Engineering at…

77 FR 22328 - Guidance for Industry on the Judicious Use of Medically Important Antimicrobial Drugs in Food...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... electronic comments on the guidance to http:[sol][sol]www.regulations.gov. Submit written comments to the... at either http:[sol][sol]www.fda.gov/AnimalVeterinary/ GuidanceComplianceEnforcement/GuidanceforIndustry/default.htm or http:[sol][sol]www.regulations.gov. Dated: April 5, 2012. David Dorsey, Acting...

Integrating Chemistry Laboratory Instrumentation into the Industrial Internet: Building, Programming, and Experimenting with an Automatic Titrator

ERIC Educational Resources Information Center

Famularo, Nicole; Kholod, Yana; Kosenkov, Dmytro

2016-01-01

This project is designed to improve physical chemistry and instrumental analysis laboratory courses for undergraduate students by employing as teaching tools novel technologies in electronics and data integration using the industrial Internet. The project carried out by upper-division undergraduates is described. Students are exposed to a complete…

Information Transfer in the Illinois Swine Industry: How Producers Are Informed of New Technologies.

ERIC Educational Resources Information Center

Brashear, Genefer L.; Hollis, Gilbert; Wheeler, Matthew B.

2000-01-01

A survey of 127 (of 300) Illinois swine producers found that 114 owned computers; the majority used industry magazines as sources of information about new technologies; extension newsletters were used much less by corporate farm enterprises; very small numbers used electronic mail; only about half used university specialists for information; and…

Meeting the Expectation of Industry: An Integrated Approach for the Teaching of Mechanics and Electronics to Design Students

ERIC Educational Resources Information Center

Bingham, Guy A.; Southee, Darren J.; Page, Tom

2015-01-01

This paper examines the traditional engineering-based provision delivered to Product Design and Technology (B.Sc.) undergraduates at the Loughborough Design School and questions its relevancy against the increasing expectations of industry. The paper reviews final-year design projects to understand the level of transference of engineering-based…

Industry Academia Partnership Project: Computerized Drafting and Electronic Program Improvements through Job Experiences, Curriculum Development and Faculty Professional Growth.

ERIC Educational Resources Information Center

Rodriguez, Felix; Colon, Elsie M.

The Industry-Academia Partnership Pilot Project (IAPPP) was undertaken by Huertas Junior College (HJC), in Caguas, Puerto Rico, to improve advanced technical education, enhance the competitive capabilities of the region, and reduce the region's unemployment rate. The project consisted of three basic components: professional growth opportunities…

Applied Math & Science Levels Utilized in Selected Trade & Industrial Vocational Education. Final Report.

ERIC Educational Resources Information Center

Gray, James R.

Research identified and evaluated the level of applied mathematics and science used in selected trade and industrial (T&I) subjects taught in the Kentucky Vocational Education System. The random sample was composed of 52 programs: 21 carpentry, 20 electricity/electronics, and 11 machine shop. The 96 math content items that were identified as…

The Business and Technology of Electronic and Optical Publishing.

ERIC Educational Resources Information Center

Schwerin, Julie B.

1988-01-01

The first of a two-part series on the emergence of CD-ROM in the online publishing industry introduces the business and technology aspects of electronic and optical publishing. The development of CD-ROM products and differences between CD-ROM and online in the areas of technology, content, and marketing are discussed. (MES)

Analyzing the Environmental Impacts of Laptop Enclosures Using Screening-Level Life Cycle Assessment to Support Sustainable Consumer Electronics

EPA Science Inventory

With the ever-increasing amount of consumer electronics in service, it is essential industries and policy-makers work together to develop ways to manufacture more environmentally sustainable IT products which meet the needs of society. The objective of this study was to better un...

40 CFR 60.2260 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2014 CFR

2014-07-01

... SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration Units Air Curtain... paper copy or electronic format, unless the Administrator approves another format, for at least 5 years...) Submit initial and annual opacity test reports as electronic or paper copy on or before the applicable...

40 CFR 60.2260 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2012 CFR

2012-07-01

... SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration Units for Which... initial and annual opacity tests onsite in either paper copy or electronic format, unless the... as electronic or paper copy on or before the applicable submittal date. (f) Keep a copy of the...

40 CFR 60.2260 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2013 CFR

2013-07-01

... SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration Units Air Curtain... paper copy or electronic format, unless the Administrator approves another format, for at least 5 years...) Submit initial and annual opacity test reports as electronic or paper copy on or before the applicable...

40 CFR 60.2260 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2010 CFR

2010-07-01

... SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration Units for Which... initial and annual opacity tests onsite in either paper copy or electronic format, unless the... as electronic or paper copy on or before the applicable submittal date. (f) Keep a copy of the...

40 CFR 60.2870 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2011 CFR

2011-07-01

... SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration... records of results of all initial and annual opacity tests onsite in either paper copy or electronic... annual opacity test reports as electronic or paper copy on or before the applicable submittal date and...

40 CFR 60.2260 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2011 CFR

2011-07-01

... SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration Units for Which... initial and annual opacity tests onsite in either paper copy or electronic format, unless the... as electronic or paper copy on or before the applicable submittal date. (f) Keep a copy of the...

40 CFR 60.2870 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2012 CFR

2012-07-01

... SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration... onsite in either paper copy or electronic format, unless the Administrator approves another format, for... the previous report. (e) Submit initial and annual opacity test reports as electronic or paper copy on...

40 CFR 60.2870 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2010 CFR

2010-07-01

... SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration... records of results of all initial and annual opacity tests onsite in either paper copy or electronic... annual opacity test reports as electronic or paper copy on or before the applicable submittal date and...

40 CFR 60.2870 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2013 CFR

2013-07-01

... SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration... onsite in either paper copy or electronic format, unless the Administrator approves another format, for... report. (e) Submit initial and annual opacity test reports as electronic or paper copy on or before the...

40 CFR 60.2870 - What are the recordkeeping and reporting requirements for air curtain incinerators?

Code of Federal Regulations, 2014 CFR

2014-07-01

... SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration... onsite in either paper copy or electronic format, unless the Administrator approves another format, for... report. (e) Submit initial and annual opacity test reports as electronic or paper copy on or before the...

Industry Driven Electronic Communication Competencies for an Associate Electronics Degree: A Phenomenological Study

ERIC Educational Resources Information Center

McNeill, Dennis G.

2013-01-01

Scholars and professionals alike contend our nation's competitive position and economic growth depends considerably on the acumen of its science, technology, engineering, and math (STEM) talent pool. In spite of current economic conditions and high national unemployment, there is an increasing demand for those skilled in technology and…

Vocational Electronics Second Year Teacher's Guide and Student Workbook.

ERIC Educational Resources Information Center

Solanik, Chuck

This guide is intended to help teachers give preparatory instruction in the development of basic manipulative skills, safety practices, technical knowledge, and related industrial information in order to prepare students for useful employment in the field of electronics. This second-year guide contains 7 units organized into 21 lesson plans. Each…

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL. BASIC ELECTRICITY, UNIT 3, ASSIGNMENTS.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS GUIDE IS FOR INDIVIDUAL STUDENT USE IN STUDYING BASIC ELECTRICAL FUNDAMENTALS IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS. THE COURSE OBJECTIVE IS TO DEVELOP AN UNDERSTANDING OF DIRECT CURRENT FUNDAMENTALS. EACH OF THE 10 ASSIGNMENT SHEETS PROVIDES THE LESSON SUBJECT, PURPOSE,…

Citation Analysis: A Case Study of Korean Scientists and Engineers in Electrical and Electronics Engineering.

ERIC Educational Resources Information Center

Rieh, Hae-young

1993-01-01

Describes a study that investigated the citation patterns of publications by scientists and engineers in electrical and electronics engineering in Korea. Citation behavior of personnel in government, universities, and industry is compared; and citation patterns from articles in Korean and non-Korean publications are contrasted. (Contains 27…

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL. D-C MAGNETIC MOTOR CONTROL, UNIT 7, ASSIGNMENTS.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS GUIDE IS FOR INDIVIDUAL STUDENT USE IN STUDYING DIRECT CURRENT MAGNETIC MOTOR CONTROL IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS. EACH OF THE 15 ASSIGNMENT SHEETS PROVIDES THE LESSON SUBJECT, PURPOSE, INTRODUCTORY INFORMATION, STUDY REFERENCES, AND PROBLEMS. SOME OF THE LESSONS…

78 FR 44573 - Guidance for Industry on Providing Submissions in Electronic Format-Postmarket Non-Expedited...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-24

... should contact the Center for Drug Evaluation and Research (CDER) or Center for Biologics and Evaluation and Research (CBER) and resubmit their non-expedited ICSRs in a compatible electronic format. \\1\\ For... guidance to the Division of Drug Information, Center for Drug Evaluation and Research, Food and Drug...

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL. A-C CONVENTIONAL MAGNETIC MOTOR CONTROL, PART I, UNIT 5, ASSIGNMENTS.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS GUIDE IS FOR INDIVIDUAL STUDENT USE IN STUDYING ALTERNATING CURRENT CONVENTIONAL MAGNETIC MOTOR CONTROL IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS. EACH OF THE 10 ASSIGNMENT SHEETS PROVIDES THE LESSON SUBJECT, PURPOSE, INTRODUCTORY INFORMATION, STUDY REFERENCES, SUPPLEMENTARY…

Diesel Technology: Electrical and Electronic Systems. Teacher Edition [and] Student Edition.

ERIC Educational Resources Information Center

Ready, Allan; Kauffman, Ricky; Bogle, Jerry

This document contains the materials for a competency-based course in diesel technology and electrical and electronic systems that is tied to measurable and observable learning outcomes identified and validated by an advisory committee of business and industry representatives and teachers. The competencies addressed align with the medium/heavy…

Industrial Education. Electricity/Electronics Curriculum Guide, Phase II. Instructional Modules, Level II.

ERIC Educational Resources Information Center

Lillo, Robert E.; Soffiotto, Nicholas S.

Designed for students in the ninth grade, this electricity/electronics curriculum guide contains instructional modules for twenty-four units of instruction. Among the modules included are (1) introduction to the world of electricity, (2) electrical safety, (3) the electrical team, (4) resistance and resistors, (5) electric lamps and heating…

Defining Usability Heuristics for Adoption and Efficiency of an Electronic Workflow Document Management System

ERIC Educational Resources Information Center

Fuentes, Steven

2017-01-01

Usability heuristics have been established for different uses and applications as general guidelines for user interfaces. These can affect the implementation of industry solutions and play a significant role regarding cost reduction and process efficiency. The area of electronic workflow document management (EWDM) solutions, also known as…

Development of a Situated Spectrum Analyzer Learning Platform for Enhancing Student Technical Skills

ERIC Educational Resources Information Center

Chuang, Chien-Pen; Jou, Min; Lin, Yen-Ting; Lu, Cheng-Tien

2015-01-01

Electronic engineering industries require technical specialists to operate precision electronic instruments. However, limitations in course designs and equipment availability mean that only a few students are able to use the equipment in practical lessons within a limited timeframe. Also, instruction of techniques and skills are still mostly…

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL. BASIC ELECTRICITY, UNIT 2, ASSIGNMENTS.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS GUIDE IS FOR INDIVIDUAL STUDENT USE IN STUDYING BASIC ELECTRICAL FUNDAMENTALS IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS. THE COURSE OBJECTIVE IS TO DEVELOP AN UNDERSTANDING OF DIRECT CURRENT FUNDAMENTALS. EACH OF THE 15 ASSIGNMENT SHEETS PROVIDES THE LESSON SUBJECT, PURPOSE,…

Effect of Different Time/Temperature Roast Combinations on Peanut Flavor-Descriptive Sensory, Electronic Nose and Electronic Eye Characterization

USDA-ARS?s Scientific Manuscript database

Roasting is of central importance to peanut flavor. Standard industry practice is to roast peanuts to a specific surface color (Hunter L-value) for a given application; however, equivalent surface colors can be generated using different temperature/time roast combinations. To better understand the e...

Vocational Electronics First Year Teacher's Guide and Student Workbook.

ERIC Educational Resources Information Center

Solanik, Chuck

This guide is intended to help teachers give preparatory instruction in the development of basic manipulative skills, safety practices, technical knowledge, and related industrial information in order to prepare students for useful employment in the field of electronics. This first-year guide contains 6 units organized in 21 lesson plans. Each…

Industrial Education. Electricity/Electronics Curriculum Guide, Phase II. Instructional Modules, Level I (9 Week).

ERIC Educational Resources Information Center

Lillo, Robert E.; Soffiotto, Nicholas S.

Designed for students in grades 7 and 8, this electricity/electronics curriculum guide contains instructional modules for ten units of instruction (nine-week class): (1) orientation; (2) understanding electricity; (3) safety; (4) methods to generate electricity; (5) wiring tools and wire; (6) soldering; (7) magnetism and electromagnetism; (8)…

Industrial Education. Electricity/Electronics Curriculum Guide, Phase II. Instructional Modules, Level I (18 Week).

ERIC Educational Resources Information Center

Lillo, Robert E.; Soffiotto, Nicholas S.

Designed for students in grades 7 and 8, this electricity/electronics curriculum guide contains instructional modules for twelve units of instruction: (1) orientation; (2) understanding electricity; (3) safety; (4) methods to generate electricity; (5) wiring tools and wire; (6) soldering; (7) magnetism and electromagnetism; (8) circuits, symbols,…

Evaluation of field operations test 8 : electronic credentialing : New York state proof-of-concept project one stop credentialing and registration

DOT National Transportation Integrated Search

2001-09-01

The State of New York received a grant from the I-95 Corridor Coalition to develop a proof-of-concept for an electronic credentialing system for the motor carrier industry. When fully developed, the system, which is a web-based solution, will enable ...

Developing a Systematic Architecture Approach for Designing an Enhanced Electronic Medical Record (EEMR) System

ERIC Educational Resources Information Center

Aldukheil, Maher A.

2013-01-01

The Healthcare industry is characterized by its complexity in delivering care to the patients. Accordingly, healthcare organizations adopt and implement Information Technology (IT) solutions to manage complexity, improve quality of care, and transform to a fully integrated and digitized environment. Electronic Medical Records (EMR), which is…

Electronic noses and tongues: Applications for the food and pharmaceutical industries

USDA-ARS?s Scientific Manuscript database

The electronic nose (enose) is designed to crudely mimic the human brain in that most contain sensors that non-selectively interact with odor molecules to produce some sort of signal that is then sent to a computer that uses multivariate statistics to determine patterns in the data. This pattern rec...

Use of electronic nose technology to identify cattle experimentally infected with Mycobacterium bovis: A pilot study

USDA-ARS?s Scientific Manuscript database

Electronic nose technology has historically been utilized for the detection of volatile organic compounds (VOCs) and semi-volatile compounds in air, soil, water, and for quality control in food, beverage and cosmetic industries. Breath analysis has been used experimentally in humans and animals to ...

Polybrominated dibenzo-p-dioxins/dibenzofurans and polybrominated diphenyl ethers in soil, vegetation, workshop-floor dust, and electronic shredder residue from an electronic waste recycling facility and in soils from a chemical industrial complex in eastern China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jing Ma; Rudolf Addink; Sehun Yun

2009-10-01

In this study, 11 2,3,7,8-substituted PBDD/Fs and 10 polybrominated diphenyl ether (PBDE) congeners were determined in electronic shredder waste, workshop-floor dust, soil, and leaves (of plants on the grounds of the facility) from a large-scale electronic wastes (e-waste) recycling facility and in surface soil from a chemical-industrial complex (comprising a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant) as well as agricultural areas in eastern China. Total PBDD/F concentrations in environmental samples were in the range of 113-818 pg/g dry wt (dw) for leaves, 392-18,500 pg/g dw for electronic shredder residues, 716-80,0000 pg/g dw for soil samples, andmore » 89,600-14,3000 pg/g dw for workshop-floor dust from the e-waste recycling facility and in a range from nondetect (ND) to 427 pg/g dw in soil from the chemical-industrial complex. The highest mean concentrations of total PBDD/Fs were found in soil samples and workshop-floor dust from the e-waste recycling facility. The dioxin-like toxic equivalent (measured as TEQ) concentrations of PBDD/Fs were greater than the TEQs of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) reported in our previous study for the same set of samples. The concentrations of PBDFs were several orders of magnitude higher than the concentrations of PBDDs in samples from the e-waste facility or from soil from the chemical-industrial complex. A significant correlation was found between the concentrations of {Sigma}PBDD/Fs and {Sigma}PBDEs (r = 0.769, p < 0.01) and between SPBDD/Fs and the previously reported SPCDD/F concentrations (r = 0.805, p < 0.01). The estimated daily human intakes of TEQs contributed by PBDD/Fs via soil/dust ingestion and dermal exposures in e-waste recycling facilities were higher than the intakes of TEQs contributed by PCDD/Fs, calculated in our previous study. 45 refs., 2 figs., 2 tabs.« less

Privacy, confidentiality, and electronic medical records.

PubMed Central

Barrows, R C; Clayton, P D

1996-01-01

The enhanced availability of health information in an electronic format is strategic for industry-wide efforts to improve the quality and reduce the cost of health care, yet it brings a concomitant concern of greater risk for loss of privacy among health care participants. The authors review the conflicting goals of accessibility and security for electronic medical records and discuss nontechnical and technical aspects that constitute a reasonable security solution. It is argued that with guiding policy and current technology, an electronic medical record may offer better security than a traditional paper record. PMID:8653450

Network security vulnerabilities and personal privacy issues in Healthcare Information Systems: a case study in a private hospital in Turkey.

PubMed

Namoğlu, Nihan; Ulgen, Yekta

2013-01-01

Healthcare industry has become widely dependent on information technology and internet as it moves from paper to electronic records. Healthcare Information System has to provide a high quality service to patients and a productive knowledge share between healthcare staff by means of patient data. With the internet being commonly used across hospitals, healthcare industry got its own share from cyber threats like other industries in the world. The challenge is allowing knowledge transfer to hospital staff while still ensuring compliance with security mandates. Working in collaboration with a private hospital in Turkey; this study aims to reveal the essential elements of a 21st century business continuity plan for hospitals while presenting the security vulnerabilities in the current hospital information systems and personal privacy auditing standards proposed by regulations and laws. We will survey the accreditation criteria in Turkey and counterparts in US and EU. We will also interview with medical staff in the hospital to understand the needs for personal privacy and the technical staff to perceive the technical requirements in terms of network security configuration and deployment. As hospitals are adopting electronic transactions, it should be considered a must to protect these electronic health records in terms of personal privacy aspects.

In Touch With Industry: ICAF Industry Studies, 1997

DTIC Science & Technology

1997-01-01

Society of Civil Engineers, Washington, DC. . 1994. "Materials for Tomorrow’s Infrastructure: A Ten-Year Plan for Deploying High - Performance ...identified high - performance electronics as a key to modern warfare and conflict prevention. Clearly, the nation’s defense strategy relies heavily on...priced, high performance systems. As a consequence, hardware makers have undergone multiple restructures, consolidations, mergers, and global

A World 2010: A New Order of Nations

DTIC Science & Technology

1992-01-01

chemical and biological ) and nuclear weapons continues. Despite the reduction of world tensions, almost every industrial nation will be armed with a...34 Engineering: electronics, civil, mechanical, metallurgical * Life: biological , medical, behavioral, social The advanced industrial societies of Hong...a very modest nuclear capability. There is a good chance that most nations, if they have nuclear weapons, will have either chemical or biological

Technology Roadmaps for Compound Semiconductors

PubMed Central

Bennett, Herbert S.

2000-01-01

The roles cited for compound semiconductors in public versions of existing technology roadmaps from the National Electronics Manufacturing Initiative, Inc., Optoelectronics Industry Development Association, Microelectronics Advanced Research Initiative on Optoelectronic Interconnects, and Optoelectronics Industry and Technology Development Association (OITDA) are discussed and compared within the context of trends in the Si CMOS industry. In particular, the extent to which these technology roadmaps treat compound semiconductors at the materials processing and device levels will be presented for specific applications. For example, OITDA’s Optical Communications Technology Roadmap directly connects the information demand of delivering 100 Mbit/s to the home to the requirement of producing 200 GHz heterojunction bipolar transistors with 30 nm bases and InP high electron mobility transistors with 100 nm gates. Some general actions for progress towards the proposed International Technology Roadmap for Compound Semiconductors (ITRCS) and methods for determining the value of an ITRCS will be suggested. But, in the final analysis, the value added by an ITRCS will depend on how industry leaders respond. The technical challenges and economic opportunities of delivering high quality digital video to consumers provide concrete examples of where the above actions and methods could be applied. PMID:27551615

Electronic Nose and Electronic Tongue

NASA Astrophysics Data System (ADS)

Bhattacharyya, Nabarun; Bandhopadhyay, Rajib

Human beings have five senses, namely, vision, hearing, touch, smell and taste. The sensors for vision, hearing and touch have been developed for several years. The need for sensors capable of mimicking the senses of smell and taste have been felt only recently in food industry, environmental monitoring and several industrial applications. In the ever-widening horizon of frontier research in the field of electronics and advanced computing, emergence of electronic nose (E-Nose) and electronic tongue (E-Tongue) have been drawing attention of scientists and technologists for more than a decade. By intelligent integration of multitudes of technologies like chemometrics, microelectronics and advanced soft computing, human olfaction has been successfully mimicked by such new techniques called machine olfaction (Pearce et al. 2002). But the very essence of such research and development efforts has centered on development of customized electronic nose and electronic tongue solutions specific to individual applications. In fact, research trends as of date clearly points to the fact that a machine olfaction system as versatile, universal and broadband as human nose and human tongue may not be feasible in the decades to come. But application specific solutions may definitely be demonstrated and commercialized by modulation in sensor design and fine-tuning the soft computing solutions. This chapter deals with theory, developments of E-Nose and E-Tongue technology and their applications. Also a succinct account of future trends of R&D efforts in this field with an objective of establishing co-relation between machine olfaction and human perception has been included.

Direction of CRT waste glass processing: Electronics recycling industry communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Julia R., E-mail: mueller.143@osu.edu; Boehm, Michael W.; Drummond, Charles

2012-08-15

Highlights: Black-Right-Pointing-Pointer Given a large flow rate of CRT glass {approx}10% of the panel glass stream will be leaded. Black-Right-Pointing-Pointer The supply of CRT waste glass exceeded demand in 2009. Black-Right-Pointing-Pointer Recyclers should use UV-light to detect lead oxide during the separation process. Black-Right-Pointing-Pointer Recycling market analysis techniques and results are given for CRT glass. Black-Right-Pointing-Pointer Academic initiatives and the necessary expansion of novel product markets are discussed. - Abstract: Cathode Ray Tube, CRT, waste glass recycling has plagued glass manufacturers, electronics recyclers and electronics waste policy makers for decades because the total supply of waste glass exceeds demand, andmore » the formulations of CRT glass are ill suited for most reuse options. The solutions are to separate the undesirable components (e.g. lead oxide) in the waste and create demand for new products. Achieving this is no simple feat, however, as there are many obstacles: limited knowledge of waste glass composition; limited automation in the recycling process; transportation of recycled material; and a weak and underdeveloped market. Thus one of the main goals of this paper is to advise electronic glass recyclers on how to best manage a diverse supply of glass waste and successfully market to end users. Further, this paper offers future directions for academic and industry research. To develop the recommendations offered here, a combination of approaches were used: (1) a thorough study of historic trends in CRT glass chemistry; (2) bulk glass collection and analysis of cullet from a large-scale glass recycler; (3) conversations with industry members and a review of potential applications; and (4) evaluation of the economic viability of specific uses for recycled CRT glass. If academia and industry can solve these problems (for example by creating a database of composition organized by manufacturer and glass source) then the reuse of CRT glass can be increased.« less

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

NASA Astrophysics Data System (ADS)

Parejo Calvo, Wilson A.; Duarte, Celina L.; Machado, Luci Diva B.; Manzoli, Jose E.; Geraldo, Aurea Beatriz C.; Kodama, Yasko; Silva, Leonardo Gondim A.; Pino, Eddy S.; Somessari, Elizabeth S. R.; Silveira, Carlos G.; Rela, Paulo R.

2012-08-01

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO2 and NOX removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and treatment of effluent from petroleum production units and liquid irradiation process to treat vessel water ballast. On the other hand, there is a growing need of mobile EB facilities for different applications in South America.

Application of Traditional and Nanostructure Materials for Medical Electron Beams Collimation: Numerical Simulation

NASA Astrophysics Data System (ADS)

Miloichikova, I. A.; Stuchebrov, S. G.; Zhaksybayeva, G. K.; Wagner, A. R.

2015-11-01

Nowadays, the commercial application of the electron accelerators grows in the industry, in the research investigations, in the medical diagnosis and treatment. In this regard, the electron beam profile modification in accordance with specific purposes is an actual task. In this paper the model of the TPU microtron extracted electron beam developed in the program “Computer Laboratory (PCLab)” is described. The internal beam divergence influence for the electron beam profile and depth dose distribution in the air is considered. The possibility of using the nanostructure materials for the electron beam formation was analyzed. The simulation data of the electron beam shape collimated by different materials (lead, corund- zirconia nanoceramic, gypsum) are shown. The collimator material influence for the electron beam profile and shape are analyzed.

Improved model for detection of homogeneous production batches of electronic components

NASA Astrophysics Data System (ADS)

Kazakovtsev, L. A.; Orlov, V. I.; Stashkov, D. V.; Antamoshkin, A. N.; Masich, I. S.

2017-10-01

Supplying the electronic units of the complex technical systems with electronic devices of the proper quality is one of the most important problems for increasing the whole system reliability. Moreover, for reaching the highest reliability of an electronic unit, the electronic devices of the same type must have equal characteristics which assure their coherent operation. The highest homogeneity of the characteristics is reached if the electronic devices are manufactured as a single production batch. Moreover, each production batch must contain homogeneous raw materials. In this paper, we propose an improved model for detecting the homogeneous production batches of shipped lot of electronic components based on implementing the kurtosis criterion for the results of non-destructive testing performed for each lot of electronic devices used in the space industry.

Dyes for displays

NASA Astrophysics Data System (ADS)

Claussen, U.

1984-01-01

The improvement of contrast and visibility of LCD by two different means was undertaken. The two methods are: (1) development of fluorescent dyes to increase the visibility of fluorescent activated displays (FLAD); and (2) development of dichroic dyes to increase the contrast of displays. This work was done in close cooperation with the electronic industry, where the newly synthesized dyes were tested. The targets for the chemical synthesis were selected with the help of computer model calculations. A marketable range of dyes was developed. Since the interest of the electronic industries concerning FLAD was low, the investigations were stopped. Dichroic dyes, especially black mixtures with good light fastness, order parameter, and solubility in nematic phases were developed. The application of these dyes is restricted to indoor use because of an increase of viscosity below -10 C. Applications on a technical scale, e.g., for the automotive industry, will be possible if the displays work at temperatures down to -40 C. This problem requires a complex optimization of the dye/nematic phase system.

Polyetherimide/bucky gels nanocomposites with superior conductivity and thermal stability.

PubMed

Chen, Ye; Tao, Jing; Deng, Lin; Li, Liang; Li, Jun; Yang, Yang; Khashab, Niveen M

2013-08-14

Polyetherimide (PEI) nanocomposites comprising bucky gels of industrial-grade multiwalled carbon nanotubes (MWCNTs) and ionic liquid (IL, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIM][PF6])) were prepared. The processing framework for this nanocomposite is simple, reproducible, and easily scalable. The strong interaction between IL and MWCNTs caused the latter to uniformly disperse in the PEI matrix while IL flowed into the gaps between the nanotubes' walls. The nanocomposite exhibited an enhanced conductivity of 2.01 × 10(4) Ω·cm volume resistivity at room temperature; the value decreased dramatically by 12 orders of magnitude, compared to pristine PEI. The IL free ions and MWCNTs networks provided excellent channels for electron transfer. PEI/bucky gels nanocomposites also showed improved thermal stability and high tensile strength. Other than having antiwear properties, this material can have numerous applications in the aerospace and electronics industries. Moreover, our work presents a "green" method toward modified nanocomposites industrial production as IL is environmentally safe and is easily recyclable.

Free electron lasers for 13nm EUV lithography: RF design strategies to minimise investment and operational costs

NASA Astrophysics Data System (ADS)

Keens, Simon; Rossa, Bernhard; Frei, Marcel

2016-03-01

As the semiconductor industry proceeds to develop ever better sources of extreme ultraviolet (EUV) light for photolithography applications, two distinct technologies have come to prominence: Tin-plasma and free electron laser (FEL) sources. Tin plasma sources have been in development within the industry for many years, and have been widely reported. Meanwhile, FELs represent the most promising alternative to create high power EUV frequencies and, while tin-plasma source development has been ongoing, such lasers have been continuously developed by academic institutions for use in fundamental research programmes in conjunction with universities and national scientific institutions. This paper follows developments in the field of academic FELs, and presents information regarding novel technologies, specifically in the area of RF design strategy, that may be incorporated into future industrial FEL systems for EUV lithography in order to minimize the necessary investment and operational costs. It goes on to try to assess the cost-benefit of an alternate RF design strategy, based upon previous studies.

Lead-Free Electronics: Impact for Space Electronics

NASA Technical Reports Server (NTRS)

Sampson, Michael J.

2010-01-01

Pb is used as a constituent in solder alloys used to connect and attach electronic parts to printed wiring boards (PWBs). Similar Pbbearing alloys are electroplated or hot dipped onto the terminations of electronic parts to protect the terminations and make them solderable. Changing to Pb-free solders and termination finishes has introduced significant technical challenges into the supply chain. Tin/lead (Sn/Pb) alloys have been the solders of choice for electronics for more than 50 years. Pb-free solder alloys are available but there is not a plug-in replacement for 60/40 or 63/37 (Sn/Pb) alloys, which have been the industry workhorses.

The Asian Semiconductor Industry and It’s Potential Impacts to U.S. National Security. Electronics Industry Study

DTIC Science & Technology

2007-01-01

late 1980s, Korean firms began to compete globally on memory chips, with Samsung earning a sales profit in 1987 (Pecht, 1997, p. 10; Mathews, 2000, p...competitive in the 1990s (Lee, 1997, p. 41). Singapore, Malaysia and China have since developed significant chip industries (Beane, 1997, p. 9; Pecht...sales in parentheses): #2 Samsung ($19.7B), #5 Toshiba ($9.8B), #6 TSMC ($9.7B), #7 Hynix ($8.0B) and #8 Renesas ($7.9B) (McGrath, 2007, p. 3

Effects of financial crisis on the industry sector of Chinese stock market — from a perspective of complex network

NASA Astrophysics Data System (ADS)

Yang, Chunxia; Chen, Yanhua; Hao, Weiwei; Shen, Ying; Tang, Minxuan; Niu, Lei

2014-05-01

In this paper, we use mutual information to measure the statistical interdependence between 23 industry sectors of Shanghai stock market and construct corresponding correlation network to analyze the shock of 2008 financial crisis on industry sectors. The obtained meaningful facts are as follows. First, such crisis has only a limited impact on leading industries such as Manufacturing, Commercial trade and Machinery & Equipment, which still play an important role in Chinese economy. Second, the crisis badly attacks China's export industries like Electronics, Wood & Furniture and Textile & Clothing. The damage further hurts other industries, and then export industries' influence becomes larger. Third, the crisis adversely impacts the import industries like Petrochemical, Metal & Nonmetal and Pharmaceutical Biotechnology. While due to the stimulation of macroeconomic policies, the influence of crisis on import industries is limited. Similarly, due to relatively strict capital control and the macroeconomic policies stimulating the domestic demand, those industries like Construction, Real Estate and Financial Services are slightly wounded. All these findings suggest that Chinese government should transform from the external demand to the domestic consumption to sustain economic growth.

Review of electronic-nose technologies and algorithms to detect hazardous chemicals in the environment

Treesearch

Alphus D. Wilson

2012-01-01

Novel mobile electronic-nose (e-nose) devices and algorithms capable of real-time detection of industrial and municipal pollutants, released from point-sources, recently have been developed by scientists worldwide that are useful for monitoring specific environmental-pollutant levels for enforcement and implementation of effective pollution-abatement programs. E-nose...

78 FR 70953 - Draft Guidance for Industry on Generic Drug User Fee Amendments of 2012: Questions and Answers...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-27

....regulations.gov Web site from November 4, 2013, through November 13, 2013, due to technical difficulties. DATES: Submit either electronic or written comments to the docket by December 11, 2013. ADDRESSES: Submit electronic comments to http://www.regulations.gov . Submit written comments to the Division of...

Factors Influencing the Adoption of Electronic Medical Records: Phenomenological Study of Physicians in Private Practice

ERIC Educational Resources Information Center

Backherms, Dennis A.

2017-01-01

Information technology has become increasingly necessary for competition in the 21st century. The medical industry has taken on a more comprehensive approach by creating and adopting different types of electronic medical records (EMR). Laws and regulations, such as the Health Insurance Portability and Accountability Act (HIPAA) or the Meaningful…

USSR Report, International Affairs.

DTIC Science & Technology

1987-04-07

the policies, views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical...20402. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road...of the quasi-electronic or digital electronic type. For this, we have available modern technical solutions and industrial production capabilities

T & I--Electronics. Kit No. 71. Instructor's Manual [and] Student Learning Activity Guide.

ERIC Educational Resources Information Center

Munt, Linda

An instructor's manual and student activity guide on electronics are provided in this set of prevocational education materials which focuses on the vocational area of trade and industry. (This set of materials is one of ninety-two prevocational education sets arranged around a cluster of seven vocational offerings: agriculture, home economics,…

The Future of Learning: From eLearning to mLearning.

ERIC Educational Resources Information Center

Keegan, Desmond

The future of electronic learning was explored in an analysis that viewed the provision of learning at a distance as a continuum and traced the evolution from distance learning to electronic learning to mobile learning in Europe and elsewhere. Special attention was paid to the following topics: (1) the impact of the industrial revolution, the…

Microstructure-Evolution and Reliability Assessment Tool for Lead-Free Component Insertion in Army Electronics

DTIC Science & Technology

2008-10-01

provide adequate means for thermal heat dissipation and cooling. Thus electronic packaging has four main functions [1]: • Signal distribution which... dissipation , involving structural and materials consideration. • Mechanical, chemical and electromagnetic protection of components and... nature when compared to phenomenological models. Microelectronic packaging industry spends typically several months building and reliability

Continuing professional education: Status, trends, and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1975-01-01

Four professional groups, teachers, doctors, lawyers, and engineers were examined to determine if they constitute a potential market for continuing professional education via large scale electronic technology. Data were collected in view of social and economic forces, such as mandatory periodic relicensure, additional course requirements for certification, or the economic health of supporting industries.

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL, STATIC CONTROL SERIES. BASIC CONTROL FUNCTIONS, UNIT 9A.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS SELF-INSTRUCTIONAL PROGRAMED TEXT IS FOR INDIVIDUAL STUDENT USE IN STUDYING STATIC CONTROL IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS AND HAS BEEN TESTED BY STUDENT USE. THE OBJECTIVE OF THE COURSE IS TO HELP THE ELECTRICAL-TECHNICIAN DEVELOP AN UNDERSTANDING OF STATIC CONTROL…

A Multidisciplinary PBL Robot Control Project in Automation and Electronic Engineering

ERIC Educational Resources Information Center

Hassan, Houcine; Domínguez, Carlos; Martínez, Juan-Miguel; Perles, Angel; Capella, Juan-Vicente; Albaladejo, José

2015-01-01

This paper presents a multidisciplinary problem-based learning (PBL) project consisting of the development of a robot arm prototype and the implementation of its control system. The project is carried out as part of Industrial Informatics (II), a compulsory third-year course in the Automation and Electronic Engineering (AEE) degree program at the…

75 FR 22598 - Agency Information Collection Activities; Submission for Office and Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... Electronic Format to the Center for Veterinary Medicine--(OMB Control Number 0910-0524)--Extension Protocols... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0055... Request; Guidance for Industry on How to Submit a Protocol Without Data in Electronic Format to the Center...

NASA Tech Briefs Index, 1976. [bibliography

NASA Technical Reports Server (NTRS)

1976-01-01

Abstracts of new technology derived from the research and development activities of the National Aeronautics and Space Administration are presented. Emphasis is placed on information considered likely to be transferrable across industrial, regional, or disciplinary lines. Subject matter covered includes: electronic components and circuits; electronic systems; physical sciences; materials; life sciences; mechanics; machinery; fabrication technology; and mathematics and information sciences.

Test SCRs and Triacs with a Lab-Built Checker

ERIC Educational Resources Information Center

Harman, Charles

2010-01-01

Students enrolled in advanced electronics courses and/or industrial electronics classes at the high school level and at technical colleges ultimately learn about solid-state switches such as the SCR (silicon controlled rectifier) and the triac. Both the SCR and the triac are in a family of four-layer devices called thyristors. They are both…

Research on the competitiveness of high-tech industries in northeast China

NASA Astrophysics Data System (ADS)

Liu, Lei; Wang, Yang; Wang, Ming-Quan; Xiao, Yan-Bo; Gao, Ming

2017-06-01

Based on characteristics of high-tech industry in Northeast China, high-tech industry competitiveness index system was developed, and the competitiveness of high-tech industry was evaluated through principal component analysis and location quotient method. The results showed that the scale of high-tech industry in Northeast China as a whole was small, and presented a decreasing trend for the proportion in the country. The competitiveness of high-tech industry in Northeast China lagged far behind that of the eastern and central regions. The high-tech industry competitiveness of Liaoning, Jilin and Heilongjiang provinces in China ranked 15, 19 and 21, respectively. The manufacture of medicine in Jilin province, and the manufacture of aircraft and spacecraft and the related equipment in Liaoning and Heilongjiang provinces had high competitive advantage, but the manufacture of electronic equipment and communication equipment and the manufacture of computers and office equipment was lack of competitiveness. The development suggestions were put forward to improve the competitiveness of high-tech industries in Northeast China.

Science Notes.

ERIC Educational Resources Information Center

School Science Review, 1989

1989-01-01

Twenty-two activities are presented. Topics include: acid rain, microcomputers, fish farming, school-industry research projects, enzymes, equilibrium, assessment, science equipment, logic, Archimedes principle, electronics, optics, and statistics. (CW)

Part 7: Environmental Chemistry, Revised.

ERIC Educational Resources Information Center

Douville, Judith A.

2003-01-01

Discusses resources on applied/interdisciplinary areas of chemistry available as books and electronic materials that mostly target graduate students, faculty, and chemists in the industry. (Author/YDS)

48 CFR 1834.201 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... engineering support services, steady state operations, basic and applied research, and routine services such... American National Standards Institute/Electronics Industries Alliance (ANSI/EIA) Standard-748, Earned Value...

48 CFR 1834.201 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... engineering support services, steady state operations, basic and applied research, and routine services such... American National Standards Institute/Electronics Industries Alliance (ANSI/EIA) Standard-748, Earned Value...

40 CFR Appendix A to Part 122 - NPDES Primary Industry Categories

Code of Federal Regulations, 2013 CFR

2013-07-01

... coating Copper forming Electrical and electronic components Electroplating Explosives manufacturing... chemicals manufacturing Paint and ink formulation Pesticides Petroleum refining Pharmaceutical preparations...

40 CFR Appendix A to Part 122 - NPDES Primary Industry Categories

Code of Federal Regulations, 2012 CFR

2012-07-01

... coating Copper forming Electrical and electronic components Electroplating Explosives manufacturing... chemicals manufacturing Paint and ink formulation Pesticides Petroleum refining Pharmaceutical preparations...

40 CFR Appendix A to Part 122 - NPDES Primary Industry Categories

Code of Federal Regulations, 2014 CFR

2014-07-01

... coating Copper forming Electrical and electronic components Electroplating Explosives manufacturing... chemicals manufacturing Paint and ink formulation Pesticides Petroleum refining Pharmaceutical preparations...

40 CFR Appendix A to Part 122 - NPDES Primary Industry Categories

Code of Federal Regulations, 2011 CFR

2011-07-01

... coating Copper forming Electrical and electronic components Electroplating Explosives manufacturing... chemicals manufacturing Paint and ink formulation Pesticides Petroleum refining Pharmaceutical preparations...

Production of electronic grade lunar silicon by disproportionation of silicon difluoride

NASA Technical Reports Server (NTRS)

Agosto, William N.

1993-01-01

Waldron has proposed to extract lunar silicon by sodium reduction of sodium fluorosilicate derived from reacting sodium fluoride with lunar silicon tetrafluoride. Silicon tetrafluoride is obtained by the action of hydrofluoric acid on lunar silicates. While these reactions are well understood, the resulting lunar silicon is not likely to meet electronic specifications of 5 nines purity. Dale and Margrave have shown that silicon difluoride can be obtained by the action of silicon tetrafluoride on elemental silicon at elevated temperatures (1100-1200 C) and low pressures (1-2 torr). The resulting silicon difluoride will then spontaneously disproportionate into hyperpure silicon and silicon tetrafluoride in vacuum at approximately 400 C. On its own merits, silicon difluoride polymerizes into a tough waxy solid in the temperature range from liquid nitrogen to about 100 C. It is the silicon analog of teflon. Silicon difluoride ignites in moist air but is stable under lunar surface conditions and may prove to be a valuable industrial material that is largely lunar derived for lunar surface applications. The most effective driver for lunar industrialization may be the prospects for industrial space solar power systems in orbit or on the moon that are built with lunar materials. Such systems would require large quantities of electronic grade silicon or compound semiconductors for photovoltaics and electronic controls. Since silicon is the most abundant semimetal in the silicate portion of any solar system rock (approximately 20 wt percent), lunar silicon production is bound to be an important process in such a solar power project. The lunar silicon extraction process is discussed.

A desktop 3D printer with dual extruders to produce customised electronic circuitry

NASA Astrophysics Data System (ADS)

Butt, Javaid; Onimowo, Dominic Adaoiza; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

2018-03-01

3D printing has opened new horizons for the manufacturing industry in general, and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to the industrial ones. In this paper, a desktop 3D printer called Prusa Mendel i2 has been modified and integrated with an additional extruder so that the system can work with dual extruders and produce bespoke electronic circuits. The communication between the two extruders has been established by making use of the In-Chip Serial Programming port on the Arduino Uno controlling the printer. The biggest challenge is to control the flow of electric paint (to be dispensed by the new extruder) and CFD (Computational Fluid Dynamics) analysis has been carried out to ascertain the optimal conditions for proper dispensing. The final product is a customised electronic circuit with the base of plastic (from the 3D printer's extruder) and electronic paint (from the additional extruder) properly dispensed to create a live circuit on a plastic platform. This low-cost enhancement to a desktop 3D printer can provide a new prospect to produce multiple material parts where the additional extruder can be filled with any material that can be properly dispensed from its nozzle.

IRIDE: Interdisciplinary research infrastructure based on dual electron linacs and lasers

NASA Astrophysics Data System (ADS)

Ferrario, M.; Alesini, D.; Alessandroni, M.; Anania, M. P.; Andreas, S.; Angelone, M.; Arcovito, A.; Arnesano, F.; Artioli, M.; Avaldi, L.; Babusci, D.; Bacci, A.; Balerna, A.; Bartalucci, S.; Bedogni, R.; Bellaveglia, M.; Bencivenga, F.; Benfatto, M.; Biedron, S.; Bocci, V.; Bolognesi, M.; Bolognesi, P.; Boni, R.; Bonifacio, R.; Boscherini, F.; Boscolo, M.; Bossi, F.; Broggi, F.; Buonomo, B.; Calo, V.; Catone, D.; Capogni, M.; Capone, M.; Cassou, K.; Castellano, M.; Castoldi, A.; Catani, L.; Cavoto, G.; Cherubini, N.; Chirico, G.; Cestelli-Guidi, M.; Chiadroni, E.; Chiarella, V.; Cianchi, A.; Cianci, M.; Cimino, R.; Ciocci, F.; Clozza, A.; Collini, M.; Colo, G.; Compagno, A.; Contini, G.; Coreno, M.; Cucini, R.; Curceanu, C.; Curciarello, F.; Dabagov, S.; Dainese, E.; Davoli, I.; Dattoli, G.; De Caro, L.; De Felice, P.; De Leo, V.; Dell Agnello, S.; Della Longa, S.; Delle Monache, G.; De Spirito, M.; Di Cicco, A.; Di Donato, C.; Di Gioacchino, D.; Di Giovenale, D.; Di Palma, E.; Di Pirro, G.; Dodaro, A.; Doria, A.; Dosselli, U.; Drago, A.; Dupraz, K.; Escribano, R.; Esposito, A.; Faccini, R.; Ferrari, A.; Filabozzi, A.; Filippetto, D.; Fiori, F.; Frasciello, O.; Fulgentini, L.; Gallerano, G. P.; Gallo, A.; Gambaccini, M.; Gatti, C.; Gatti, G.; Gauzzi, P.; Ghigo, A.; Ghiringhelli, G.; Giannessi, L.; Giardina, G.; Giannini, C.; Giorgianni, F.; Giovenale, E.; Giulietti, D.; Gizzi, L.; Guaraldo, C.; Guazzoni, C.; Gunnella, R.; Hatada, K.; Iannone, M.; Ivashyn, S.; Jegerlehner, F.; Keeffe, P. O.; Kluge, W.; Kupsc, A.; Labate, L.; Levi Sandri, P.; Lombardi, V.; Londrillo, P.; Loreti, S.; Lorusso, A.; Losacco, M.; Lukin, A.; Lupi, S.; Macchi, A.; Magazù, S.; Mandaglio, G.; Marcelli, A.; Margutti, G.; Mariani, C.; Mariani, P.; Marzo, G.; Masciovecchio, C.; Masjuan, P.; Mattioli, M.; Mazzitelli, G.; Merenkov, N. P.; Michelato, P.; Migliardo, F.; Migliorati, M.; Milardi, C.; Milotti, E.; Milton, S.; Minicozzi, V.; Mobilio, S.; Morante, S.; Moricciani, D.; Mostacci, A.; Muccifora, V.; Murtas, F.; Musumeci, P.; Nguyen, F.; Orecchini, A.; Organtini, G.; Ottaviani, P. L.; Pace, C.; Pace, E.; Paci, M.; Pagani, C.; Pagnutti, S.; Palmieri, V.; Palumbo, L.; Panaccione, G. C.; Papadopoulos, C. F.; Papi, M.; Passera, M.; Pasquini, L.; Pedio, M.; Perrone, A.; Petralia, A.; Petrarca, M.; Petrillo, C.; Petrillo, V.; Pierini, P.; Pietropaolo, A.; Pillon, M.; Polosa, A. D.; Pompili, R.; Portoles, J.; Prosperi, T.; Quaresima, C.; Quintieri, L.; Rau, J. V.; Reconditi, M.; Ricci, A.; Ricci, R.; Ricciardi, G.; Ricco, G.; Ripani, M.; Ripiccini, E.; Romeo, S.; Ronsivalle, C.; Rosato, N.; Rosenzweig, J. B.; Rossi, A. A.; Rossi, A. R.; Rossi, F.; Rossi, G.; Russo, D.; Sabatucci, A.; Sabia, E.; Sacchetti, F.; Salducco, S.; Sannibale, F.; Sarri, G.; Scopigno, T.; Sekutowicz, J.; Serafini, L.; Sertore, D.; Shekhovtsova, O.; Spassovsky, I.; Spadaro, T.; Spataro, B.; Spinozzi, F.; Stecchi, A.; Stellato, F.; Surrenti, V.; Tenore, A.; Torre, A.; Trentadue, L.; Turchini, S.; Vaccarezza, C.; Vacchi, A.; Valente, P.; Venanzoni, G.; Vescovi, S.; Villa, F.; Zanotti, G.; Zema, N.; Zobov, M.; Zomer, F.

2014-03-01

This paper describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity "particles factory", based on a combination of high duty cycle radio-frequency superconducting electron linacs and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE is also supposed to be realized in subsequent stages of development depending on the assigned priorities.

Quality assurance and reliability in the Japanese electronics industry

NASA Astrophysics Data System (ADS)

Pecht, Michael; Boulton, William R.

1995-02-01

Quality and reliability are two attributes required for all Japanese products, although the JTEC panel found these attributes to be secondary to customer cost requirements. While our Japanese hosts gave presentations on the challenges of technology, cost, and miniaturization, quality and reliability were infrequently the focus of our discussions. Quality and reliability were assumed to be sufficient to meet customer needs. Fujitsu's slogan, 'quality built-in, with cost and performance as prime consideration,' illustrates this point. Sony's definition of a next-generation product is 'one that is going to be half the size and half the price at the same performance of the existing one'. Quality and reliability are so integral to Japan's electronics industry that they need no new emphasis.

Measurements of Thermophysical Properties of Molten Silicon and Geranium

NASA Technical Reports Server (NTRS)

Rhim, Won-Kyu

2001-01-01

The objective of this ground base program is to measure thermophysical properties of molten/ undercooled silicon, germanium, and Si-Ge alloys using a high temperature electrostatic levitator and in clearly assessing the need of the microgravity environment to achieve the objective with higher degrees of accuracy. Silicon and germanium are two of the most important semiconductors for industrial applications: silicon is unsurpassed as a microelectronics material, occupying more than 95% of the electronics market. Si-Ge alloy is attracting keen interest for advanced electronic and optoelectronic applications in view of its variable band gap and lattice parameter depending upon its composition. Accurate thermophysical properties of these materials are very much needed in the semiconductor industry for the growth of large high quality crystals.

Quality assurance and reliability in the Japanese electronics industry

NASA Technical Reports Server (NTRS)

Pecht, Michael; Boulton, William R.

1995-01-01

Quality and reliability are two attributes required for all Japanese products, although the JTEC panel found these attributes to be secondary to customer cost requirements. While our Japanese hosts gave presentations on the challenges of technology, cost, and miniaturization, quality and reliability were infrequently the focus of our discussions. Quality and reliability were assumed to be sufficient to meet customer needs. Fujitsu's slogan, 'quality built-in, with cost and performance as prime consideration,' illustrates this point. Sony's definition of a next-generation product is 'one that is going to be half the size and half the price at the same performance of the existing one'. Quality and reliability are so integral to Japan's electronics industry that they need no new emphasis.

Hard x-ray photoelectron spectroscopy equipment developed at beamline BL46XU of SPring-8 for industrial researches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yasuno, Satoshi, E-mail: yasuno@spring8.or.jp; Koganezawa, Tomoyuki; Watanabe, Takeshi

Hard X-ray photoelectron spectroscopy (HAXPES) is a powerful tool for investigating the chemical and electronic states of bulk and buried interface in a non-destructive manner due to the large probing depth of this technique. At BL46XU of SPring-8, there are two HAXPES systems equipped with different electron spectrometers, which can be utilized appropriately according to the purpose in various industrial researches. In this article, these systems are outlined, and two typical examples of HAXPES studies performed by them are presented, which focus on the silicidation at Ni/SiC interface and the energy distribution of interface states at SiO{sub 2}/a-InGaZnO.

Interorganizational health care systems implementations: an exploratory study of early electronic commerce initiatives.

PubMed

Payton, F C; Ginzberg, M J

2001-01-01

Changing business practices, customers needs, and market dynamics have driven many organizations to implement interorganizational systems (IOSs). IOSs have been successfully implemented in the banking, cotton, airline, and consumer-goods industries, and recently attention has turned to the health care industry. This article describes an exploratory study of health care IOS implementations based on the voluntary community health information network (CHIN) model.

Testing Job-Specific Literacy of Industrial Workers: Cooperation between Educators and Industry.

ERIC Educational Resources Information Center

Anderson, William W.; Stewart, Oran J.

A test of job-specific literacy, called the McCoy Assessment of Worksite Literacy Abilities (MAWSLA), could not predict the job success of the 100 employees who took it. The 108-item test was based on literary tasks encountered by employees in the course of a routine day at McCoy Electronics Company, a 560-employee firm in Pennsylvania. The…

French Plans for Fifth Generation Computer Systems.

DTIC Science & Technology

1984-12-07

centrally man- French industry In electronics, compu- aged project in France that covers all ters, software, and services and to make the facets of the...Centre National of Japan’s Fifth Generation Project , the de Recherche Scientifique (CNRS) Cooper- French scientific and industrial com- ative Research...systems, man-computer The National Projects interaction, novel computer structures, The French Ministry of Research and knowledge-based computer systems

Technological Advances in Joining

DTIC Science & Technology

1981-08-01

automotive industry, and similar robots are being equipped to perform many arc welding functions in areas where high production rates must be...nonvacuum electron-beam welding favor the use of this process by the automotive industry. For example, this process has been used to join the component...metal additions were not needed. This process has been also used to weld various assemblies for automotive transmissions (e.g., annulus gear assemblies

Processes and process development in Taiwan

NASA Technical Reports Server (NTRS)

Hwang, H. L.

1986-01-01

Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

The Transatlantic Defense Industrial Base: Restructuring Scenarios and Their Implications

DTIC Science & Technology

2005-04-01

construction of a transatlantic defense sector are tangible, but significant obstacles may accelerate the formation of a bipolar industrial base. While market...electronics powerhouse. Four months later, this combined entity merged with Dasa to form European Aeronautic Defence and Space Company (EADS). Construcciones ...producers, and aircraft engine makers, there is little left to consolidate within Europe. Directions des Constructions Navales (DCN), the French shipmaker

Intellectual Property Rights and International Trade

DTIC Science & Technology

2008-10-20

countries from which the largest number of applications came were India, South Africa, Brazil, Mexico, Malaysia , Egypt, Saudi Arabia, and Colombia.7...industries. Other industries that indirectly benefit from IPR protection include retailers , traders, and CRS-7 8 Stephen E. Siwek, “Engines of Growth...of the total). Other popular items included wearing apparel ($27.0 million in value, 14%); consumer electronics ($16.0 million, 8%); handbags

Spring 2006. Industry Study. Health Care Industry

DTIC Science & Technology

2006-01-01

the Northeast than they are in the West” (p.1). With the use of evidence - based medicine (EBM) and the electronic medical record (EMR), progress is...September). Gartner on technology: Health plans can facilitate evidence - based medicine . Managed Healthcare Executive, 15(9), 51. IBISWORLD... Evidence - based medicine : What it is and what it isn’t. British Medical Journal, 312, 71-2. Satcher, David. (2006, February). Community voices

Advance Planning Briefing for Industry: Information Dominance for the Full Spectrum Force.

DTIC Science & Technology

1997-05-29

Electronic Order Processing is projected. The procurement will be a FFP ID/IQ award. BRIEFER: LTC Mary Fuller, Product Manager, Army Small Computer Program...will be a Best Value evaluation with a minimum of 2 awards. The procurement is planned to run for 2 years for ordering, Electronic Order Processing is...procurement is planned to run for three years for ordering, Electronic Order Processing is projected. The procurement will be a FFP ID/IQ award. BRIEFER

Electronic Tongue Containing Redox and Conductivity Sensors

NASA Technical Reports Server (NTRS)

Buehler, Martin

2007-01-01

The Electronic Tongue (E-tongue 2) is an assembly of sensors for measuring concentrations of metal ions and possibly other contaminants in water. Potential uses for electronic tongues include monitoring the chemical quality of water in a variety of natural, industrial, and laboratory settings, and detecting micro-organisms indirectly by measuring microbially influenced corrosion. The device includes a heater, a temperature sensor, an oxidation/reduction (redox) sensor pair, an electrical sensor, an array of eight galvanic cells, and eight ion-specific electrodes.

Electron Beam Materials Irradiators

NASA Astrophysics Data System (ADS)

Cleland, Marshall R.

2012-06-01

Radiation processing is a well established method for enhancing the properties of materials and commercial products by treating them with ionizing energy in the form of high-energy electrons, X-rays, and gamma rays. Beneficial effects include polymerizing, cross-linking, grafting and degrading plastics, sterilizing single-use medical devices, disinfecting and disinfesting fresh foods, purifying drinking water, treating wastewater and other toxic waste materials that harm the environment, and many other applications that are still being evaluated. Industrial electron accelerators of several types have been developed and are being used for these applications. More than 1800 electron accelerators are presently installed in facilities worldwide for these purposes.

Traceability and Risk Analysis Strategies for Addressing Counterfeit Electronics in Supply Chains for Complex Systems.

PubMed

DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor

2016-10-01

Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience. © 2016 Society for Risk Analysis.

Tin Whisker Growth and Mitigation with a Nanocrysytalline Nickel Coating

NASA Astrophysics Data System (ADS)

Janiuk, Szymon

Tin whiskers are a problem in the electronics industry since the EU banned the use of lead in Pb-Sn solders as part of the Restriction of Hazardous Substances (RoHS). The biggest concern with Sn whiskers is their ability to short-circuit electronics. High reliability applications such as the aerospace, defense, healthcare, and automotive industries are at most risk. This project explores Sn whisker mitigation and prevention with the use of nanocrystalline nickel coating over Sn surfaces. Sn was plated onto a pure Cu substrate using electroplating. A high temperature and high humidity condition, at 85°C and 85% RH, was effective at growing whiskers. A nNi coating was plated over Sn/Cu coupons. After subjecting the nNi/ Sn/Cu samples through 85°C/85% RH testing conditions, no whiskers were observed penetrating the surface. These results make nNi a viable material to use as a coating to prevent the growth of Sn whiskers in electronic assemblies.

Study of solid-conversion gaseous detector based on GEM for high energy X-ray industrial CT.

PubMed

Zhou, Rifeng; Zhou, Yaling

2014-01-01

The general gaseous ionization detectors are not suitable for high energy X-ray industrial computed tomography (HEICT) because of their inherent limitations, especially low detective efficiency and large volume. The goal of this study was to investigate a new type of gaseous detector to solve these problems. The novel detector was made by a metal foil as X-ray convertor to improve the conversion efficiency, and the Gas Electron Multiplier (hereinafter "GEM") was used as electron amplifier to lessen its volume. The detective mechanism and signal formation of the detector was discussed in detail. The conversion efficiency was calculated by using EGSnrc Monte Carlo code, and the transport course of photon and secondary electron avalanche in the detector was simulated with the Maxwell and Garfield codes. The result indicated that this detector has higher conversion efficiency as well as less volume. Theoretically this kind of detector could be a perfect candidate for replacing the conventional detector in HEICT.

The uniformity study of non-oxide thin film at device level using electron energy loss spectroscopy

NASA Astrophysics Data System (ADS)

Li, Zhi-Peng; Zheng, Yuankai; Li, Shaoping; Wang, Haifeng

2018-05-01

Electron energy loss spectroscopy (EELS) has been widely used as a chemical analysis technique to characterize materials chemical properties, such as element valence states, atoms/ions bonding environment. This study provides a new method to characterize physical properties (i.e., film uniformity, grain orientations) of non-oxide thin films in the magnetic device by using EELS microanalysis on scanning transmission electron microscope. This method is based on analyzing white line ratio of spectra and related extended energy loss fine structures so as to correlate it with thin film uniformity. This new approach can provide an effective and sensitive method to monitor/characterize thin film quality (i.e., uniformity) at atomic level for thin film development, which is especially useful for examining ultra-thin films (i.e., several nanometers) or embedded films in devices for industry applications. More importantly, this technique enables development of quantitative characterization of thin film uniformity and it would be a remarkably useful technique for examining various types of devices for industrial applications.

Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process.

PubMed

Zhou, Lei; Xu, Zhenming

2012-05-01

Over the past 30 years, China has been suffering from negative environmental impacts from distempered waste electrical and electronic equipments (WEEE) recycling activities. For the purpose of environmental protection and resource reusing, China made a great effort to improve WEEE recycling. This article reviews progresses of three major fields in the development of China's WEEE recycling industry: legal system, formal recycling system, and advanced integrated process. Related laws concerning electronic waste (e-waste) management and renewable resource recycling are analyzed from aspects of improvements and loopholes. The outcomes and challenges for existing formal recycling systems are also discussed. The advantage and deficiency related to advanced integrated recycling processes for typical e-wastes are evaluated respectively. Finally, in order to achieve high disposal rates of WEEE, high-quantify separation of different materials in WEEE and high added value final products produced by separated materials from WEEE, an idea of integrated WEEE recycling system is proposed to point future development of WEEE recycling industry. © 2012 American Chemical Society

Electron beam treatment of textile dyeing wastewater: operation of pilot plant and industrial plant construction.

PubMed

Han, B; Kim, J; Kim, Y; Choi, J S; Makarov, I E; Ponomarev, A V

2005-01-01

A pilot plant for treating 1000 m3/day of dyeing wastewater with e-beam has been constructed and operated since 1998 in Daegu, Korea together with the biological treatment facility. The wastewater from various stages of the existing purification process has been treated with an electron beam in this plant, and it gave rise to elaborating the optimal technology of the electron beam treatment of wastewater with increased reliability for instant changes in the composition of wastewater. Installation of the e-beam pilot plant resulted in decolorizing and destructive oxidation of organic impurities in wastewater, appreciable reduction of chemical reagent consumption, in reduction of the treatment time, and in increase in the flow rate limit of existing facilities by 30-40%. Industrial plant for treating 10,000 m3/day each, based upon the pilot experimental result, is under construction and will be finished by 2005. This project is supported by the International Atomic Energy Agency (IAEA) and Korean Government.

Space Product Development: Bringing the Benefits of Space Down to Earth

NASA Technical Reports Server (NTRS)

Allen, Rosalie W.; Tygielski, Andrew; Gabris, Edward A.

1997-01-01

The newly developed microgravity Research Program Office was created to consolidate and integrate NASA's microgravity research efforts, comprised of the microgravity Science and Applications Program and Space Product Development Program. This resulted in an integrated agency program serving the science and industrial research communities, providing leadership, management, direction and overview of all agency microgravity research activities. This paper provides an overview of NASA's microgravity Research Program, with particular emphasis on the Space Product Development Program activities, the potential economic impact and quality of life improvements resulting from this research, and future plans for commercial microgravity research in space. The goal of the Space Product Development Program is to facilitate the use of space for commercial products and services. The unique attributes of space are exploited to conduct industry driven research in the areas of crystallography, bio-systems, agriculture, electronic and non-electronic materials. Industry uses the knowledge gained from focused space research to create new products and processes, to gain economic competitive advantages, to create new jobs and improve the quality of life on earth. The objectives of the program are implemented through NASA's Commercial Space Centers, non-profit consortia of industry, academia and government, that provide the mechanism for communication and technical expert exchange between NASA and industry. Over 200 commercial research activities have been conducted by the Commercial Space Centers and their industrial affiliates over the last four and one-half years during Space Shuttle mission, as well as sounding rocket flights. The results of this research will have a significant impact on competitive products, jobs and quality of life improvements.

Modular electron transfer circuits for synthetic biology

PubMed Central

Agapakis, Christina M

2010-01-01

Electron transfer is central to a wide range of essential metabolic pathways, from photosynthesis to fermentation. The evolutionary diversity and conservation of proteins that transfer electrons makes these pathways a valuable platform for engineered metabolic circuits in synthetic biology. Rational engineering of electron transfer pathways containing hydrogenases has the potential to lead to industrial scale production of hydrogen as an alternative source of clean fuel and experimental assays for understanding the complex interactions of multiple electron transfer proteins in vivo. We designed and implemented a synthetic hydrogen metabolism circuit in Escherichia coli that creates an electron transfer pathway both orthogonal to and integrated within existing metabolism. The design of such modular electron transfer circuits allows for facile characterization of in vivo system parameters with applications toward further engineering for alternative energy production. PMID:21468209

Technological and organizational diversity and technical advance in the early history of the American semiconductor industry

NASA Astrophysics Data System (ADS)

Cohen, W.; Holbrook, D.; Klepper, S.

1994-06-01

This study examines the early years of the semiconductor industry and focuses on the roles played by different size firms in technologically innovative processes. A large and diverse pool of firms participated in the growth of the industry. Three related technological areas were chosen for in-depth analysis: integrated circuits, materials technology, and device packaging. Large business producing vacuum tubes dominated the early production of semiconductor devices. As the market for new devices grew during the 1950's, new firms were founded and existing firms from other industries, e.g. aircraft builders and instrument makers, began to pursue semiconductor electronics. Small firms began to cater to the emerging industry by supplying materials and equipment. These firms contributed to the development of certain aspects of one thousand firms that were playing some part in the semiconductor industry.

2001 Industry Studies: Electronics

DTIC Science & Technology

2001-01-01

Center, Dallas, TX Northrop Grumman Corp, Electronic Sensors & Systems, Baltimore, MD International Acer Incorporated, Hsin Chu, Taiwan Aerospace...manufacturing. Many of the large-scale fabrication foundries are offshore in such countries as Taiwan, Singapore and Malaysia .5 - 5 - The largest market for...done in the US. However, more of the actual mass manufacturing of the chips are done in Taiwan, Singapore, and Malaysia . A new semiconductor facility