Experience with a pharmacy technician medication history program.

PubMed

Cooper, Julie B; Lilliston, Michelle; Brooks, DeAnne; Swords, Bruce

2014-09-15

The implementation and outcomes of a pharmacy technician medication history program are described. An interprofessional medication reconciliation team, led by a clinical pharmacist and a clinical nurse specialist, was charged with implementing a new electronic medication reconciliation system to improve compliance with medication reconciliation at discharge and capture compliance-linked reimbursement. The team recommended that the pharmacy department be allocated new pharmacy technician full-time-equivalent positions to assume ownership of the medication history process. Concurrent with the implementation of this program, a medication history standard was developed to define rules for documentation of what a patient reports he or she is actually taking. The standard requires a structured interview with the patient or caregiver and validation with outside sources as indicated to determine which medications to document in the medication history. The standard is based on four medication administration category rules: scheduled, as-needed, short-term, and discontinued medications. The medication history standard forms the core of the medication history technician training and accountability program. Pharmacy technicians are supervised by pharmacists, using a defined accountability plan based on a set of medical staff approved rules for what medications comprise a best possible medication history. Medication history accuracy and completeness rates have been consistently over 90% and rates of provider compliance with medication reconciliation rose from under 20% to 100% since program implementation. A defined medication history based on a medication history standard served as an effective foundation for a pharmacy technician medication history program, which helped improve provider compliance with discharge medication reconciliation. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL, STATIC CONTROL SERIES. BASIC CONTROL FUNCTIONS, UNIT 9A.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS SELF-INSTRUCTIONAL PROGRAMED TEXT IS FOR INDIVIDUAL STUDENT USE IN STUDYING STATIC CONTROL IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS AND HAS BEEN TESTED BY STUDENT USE. THE OBJECTIVE OF THE COURSE IS TO HELP THE ELECTRICAL-TECHNICIAN DEVELOP AN UNDERSTANDING OF STATIC CONTROL…

Engineering Technology Programs. Preliminary Curriculum Planning Guide.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Developed as a resource to assist in a major revision underway in Georgia area technical schools to change curricula for preparing engineering technicians, this preliminary program-planning guide describes curriculum structures for specialized programs in three major areas--electronics, electromechanics, and mechanics. The handbook, which is…

ELECTRONIC TECHNICIAN PERSONNEL AND TRAINING NEEDS OF IOWA INDUSTRIES.

ERIC Educational Resources Information Center

WEEDE, GARY DEAN

THE PURPOSE OF THIS STUDY WAS TO PROVIDE DATA FOR USE IN DEVELOPING OR IMPROVING ELECTRONIC TECHNOLOGY PROGRAMS. A POSTAL CARD QUESTIONNAIRE WAS SENT TO 678 MANUFACTURING AND PROCESSING INDUSTRIES IN IOWA EMPLOYING MORE THAN 50 PERSONS AND ALL ELECTRICAL, ELECTRONIC, AND PRECISION INSTRUMENT MANUFACTURERS EMPLOYING FEWER THAN 50 PERSONS. DATA WERE…

Electronics Curriculum.

ERIC Educational Resources Information Center

Prickett, Charlotte

This document presents results of research conducted by industry representatives regarding tasks performed by electronic technicians and line manufacturing electro-mechanical technicians in Arizona electronics industries. Based on this research, a competency-based curriculum was developed for training entry-level electronics technicians. Twelve…

Sherlock: A Coached Practice Environment for an Electronics Troubleshooting Job.

ERIC Educational Resources Information Center

Lesgold, Alan; And Others

"Sherlock" is a computer-based, supported practice environment for a complex troubleshooting job in Air Force electronics. The program was developed to raise the level of troubleshooting knowledge of avionics technicians. This describes the training problem for which Sherlock was developed, the principles behind its development, and its…

Computer Service Technician "COMPS." Curriculum Grant 1985.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in computer service technology developed at Schoolcraft College, Livonia, Michigan. The program is designed to give students a strong background in the fundamentals of electricity, electronic devices, and basic circuits (digital and linear). The curriculum includes laboratory demonstrations of the…

A Competency-Based Program for Electronic Gaming Equipment Repair.

ERIC Educational Resources Information Center

Hardman, James R.

This program is designed to provide entry-level training to individuals (especially workers displaced from industry) who desire employment as "slot technicians" in the casino industry. The 96-hour course includes both classroom instruction and hands-on experience. Sources for direct purchase of required manuals are provided. The 13…

Raising the Standard. Electronics Technician Skills for Today and Tomorrow.

ERIC Educational Resources Information Center

Electronic Industries Foundation, Washington, DC.

This manual identifies the standard skills required of a work-ready, entry-level electronics technician. It provides a valuable resource for these groups: students considering careers as electronics technicians; for counselors, educators, and administrators; and for employers. An introduction discusses use of the standards and includes two lists…

Assessment of a WIN Quality Training Demonstration Project. Phase 1 Report: Characteristics of Participants.

ERIC Educational Resources Information Center

White, Richard N.

A group of interested and academically qualified female Aid to Families with Dependent Children recipients was identified to participate in the assessment of a demonstration program to train female Work incentive Program (WIN) participants. Training for electronics technicians was conducted at DeVry Institute of Technology (Chicago) and Ohio…

Aviation Electronics Technician 3 and 2. Rate Training Manual.

ERIC Educational Resources Information Center

Bureau of Naval Personnel, Washington, DC.

The manual is designed as a self-study text for use by personnel of the Navy and Naval Reserve who are preparing to meet professional requirements for advancement in the rating of Aviation Electronics Technician. The document opens with a review of leadership and qualifications for the Aviation Electronics Technician rating. Other chapters cover…

Description and comparison of pharmacy technician training programs in the United States.

PubMed

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Environmental Technician Training in the United Kingdom.

ERIC Educational Resources Information Center

Potter, John F.

1985-01-01

Stresses the need for qualified environmental science technicians and for training courses in this area. Provides program information and statistical summarization of a national diploma program for environmental technicians titled "Business and Technician Education Council." Reviews the program areas of environmental analysis and…

Protecting the Voc Ed Consumer.

ERIC Educational Resources Information Center

Wilms, Wellford W.

To test the differences in effect of postsecondary vocational training offered by public schools and by proprietary schools, a study based on a sample of 4,8000 students and graduates in the accounting, programing, electronic technician training, dental assisting, secretarial, and cosmetology occupations was designed. Even though vocational…

Defining the Simulation Technician Role: Results of a Survey-Based Study.

PubMed

Bailey, Rachel; Taylor, Regina G; FitzGerald, Michael R; Kerrey, Benjamin T; LeMaster, Thomas; Geis, Gary L

2015-10-01

In health care simulation, simulation technicians perform multiple tasks to support various educational offerings. Technician responsibilities and the tasks that accompany them seem to vary between centers. The objectives were to identify the range and frequency of tasks that technicians perform and to determine if there is a correspondence between what technicians do and what they feel their responsibilities should be. We hypothesized that there is a core set of responsibilities and tasks for the technician position regardless of background, experience, and type of simulation center. We conducted a prospective, survey-based study of individuals currently functioning in a simulation technician role in a simulation center. This survey was designed internally and piloted within 3 academic simulation centers. Potential respondents were identified through a national mailing list, and the survey was distributed electronically during a 3-week period. A survey request was sent to 280 potential participants, 136 (49%) responded, and 73 met inclusion criteria. Five core tasks were identified as follows: equipment setup and breakdown, programming scenarios into software, operation of software during simulation, audiovisual support for courses, and on-site simulator maintenance. Independent of background before they were hired, technicians felt unprepared for their role once taking the position. Formal training was identified as a need; however, the majority of technicians felt experience over time was the main contributor toward developing knowledge and skills within their role. This study represents a first step in defining the technician role within simulation-based education and supports the need for the development of a formal job description to allow recruitment, development, and certification.

Veterinary Technician Program Director Leadership Style and Program Success

ERIC Educational Resources Information Center

Renda-Francis, Lori A.

2012-01-01

Program directors of American Veterinary Medical Association (AVMA) accredited veterinary technician programs may have little or no training in leadership. The need for program directors of AVMA-accredited veterinary technician programs to understand how leadership traits may have an impact on student success is often overlooked. The purpose of…

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR CLEANING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-36.0)

EPA Science Inventory

The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Technician Walk-Through Questionnaire. It applies to electronic data corresponding to the Technician Walk-Through Questionnaire that was scanned and verified ...

Training pharmacy technicians to administer immunizations.

PubMed

McKeirnan, Kimberly C; Frazier, Kyle R; Nguyen, Maryann; MacLean, Linda Garrelts

To evaluate the effectiveness of an immunization training program for pharmacy technicians on technicians' self-reported confidence, knowledge, and number of vaccines administered. A one-group pre- and posttest study was conducted with certified pharmacy technicians from Albertsons and Safeway community pharmacies in Idaho. Thirty pharmacy technicians were recruited to participate in an immunization administration training program comprising a 2-hour home study and a 2-hour live training. Pharmacy technician scores on a 10-question knowledge assessment, responses on a pre- and posttraining survey, and number of immunizations administered in the 6-month period following the training were collected. Twenty-five pharmacy technicians completed the home study and live portions of the immunization training program. All 29 pharmacy technicians who took the home study assessment passed with greater than 70% competency on the first attempt. Technicians self-reported increased confidence with immunization skills between the pretraining survey and the posttraining survey. From December 2016 to May 2017, the technicians administered 953 immunizations with 0 adverse events reported. For the first time, pharmacy technicians have legally administered immunizations in the United States. Trained pharmacy technicians demonstrated knowledge of vaccination procedures and self-reported improved confidence in immunization skills and administered immunizations after participating in a 4-hour training program. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Opening Up High Technology Careers to Women.

ERIC Educational Resources Information Center

Bumstead, Richard

1981-01-01

Describes a program that aims at increasing the number of women technicians in computer and other electronics industries. Discusses how more women are entering the computer field in Massachusetts, the stigma of technical work, typical assignments, lack of short-term courses, and recent responses to needs. (CT)

Highway Surveying. Instructor's Guide for an Adult Course. Highway Technicians Program Unit III.

ERIC Educational Resources Information Center

Fimmano, Ralph; Kacharian, John C.

The revised instructor's guide, which is part of the New York State Highway Technician's Program to provide needed technicians and engineers by upgrading people in the lower-level technician jobs, is geared toward the improvement of technical skills and knowledge in highway surveying. In view of the shortage of qualified technicians and engineers…

Data Documentation for Navy Civilian Manpower Study,

DTIC Science & Technology

1986-09-01

Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318

Career Directions--Electronics Technician

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

Electronics technicians (ETs) work with electronics engineers to set up and maintain complicated electronics equipment that many of today's businesses rely on. The field is varied. An ET might service the industrial controls on a factory floor. Or repair missile control systems for the government. Or an ET could specialize in cars and trucks,…

Criteria for Technician Education. A Suggested Guide.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

This publication discusses criteria for post-secondary education of technicians as illustrated by the accumulated experience of successful programs which have had their graduates sought after by employees. Chapter headings are (1) Technicians: Who They Are and What They Do, (2) Administration of Programs to Educate Technicians, (3) Physical…

48 CFR 852.211-70 - Service data manuals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technicians and engineers who possess a working knowledge of electronics and a general familiarity with the... technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also...

48 CFR 852.211-70 - Service data manuals.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technicians and engineers who possess a working knowledge of electronics and a general familiarity with the... technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also...

48 CFR 852.211-70 - Service data manuals.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technicians and engineers who possess a working knowledge of electronics and a general familiarity with the... technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also...

48 CFR 852.211-70 - Service data manuals.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technicians and engineers who possess a working knowledge of electronics and a general familiarity with the... technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also...

Utilization of Pharmacy Technicians to Increase the Accuracy of Patient Medication Histories Obtained in the Emergency Department

PubMed Central

Pisupati, Radhika; Nerenberg, Steven F.

2016-01-01

Purpose: The purpose of this study is to determine the accuracy of a pharmacy technician–collected medication history pilot program in the emergency department. This was completed by reviewing all elements of the technician activity by direct observation and by verifying the technician-collected medication list through a second phone call by a pharmacist to the outpatient pharmacy. Methods: This was a retrospective, single-center study conducted from March to April 2015. Four certified pharmacy technicians were trained by a postgraduate year 1 (PGY1) pharmacy practice resident on how to collect, verify, and accurately enter medication histories into the electronic medical record. Accuracy of pharmacy technician–collected medication histories was verified by a pharmacist through observation of their patient interviews, review of technician-completed medication history forms, and by contacting the patient's outpatient pharmacy. Results: The pharmacy technician–completed medication histories resulted in an absolute risk reduction of errors of 50% and a relative risk reduction of errors of 77% (p < .001) in comparison to medication histories collected by non-pharmacy personnel. Conclusion: With high accuracy rates, pharmacy technicians proved to be a valuable asset to the medication history process and can enhance patient safety during care transitions. The results of this study further support the Pharmacy Practice Model Initiative vision to advance the pharmacy technician role to improve the process of medication history taking and reconciliation within the health care system. PMID:27303094

You're a What?: Tower Technician

ERIC Educational Resources Information Center

Vilorio, Dennis

2012-01-01

In this article, the author talks about the role and functions of a tower technician. A tower technician climbs up the face of telecommunications towers to remove, install, test, maintain, and repair a variety of equipment--from antennas to light bulbs. Tower technicians also build shelters and radiofrequency shields for electronic equipment, lay…

Auto Technician: An Instructional Guide for Teachers.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide is designed to help teachers in automotive technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the Priority 1 competencies in Ohio Occupational Competency Assessment Profile (OCAP) for Automotive Technician. Teacher materials include program/instructor resources,…

OSU-Okmulgee's Orthotics and Prosthetics Technician Program Thrives

ERIC Educational Resources Information Center

Smith, Sharon

2007-01-01

Students in the Orthotics and Prosthetics Technician Program at Oklahoma State University (OSU)-Okmulgee are provided with opportunities to develop multiple skill sets coveted by employers that will land them jobs in the industry as technicians, fitters or pedorthists. The program was recently restructured to become a technically based orthotic…

Pharmacy technician self-efficacies: Insight to aid future education, staff development, and workforce planning.

PubMed

Desselle, Shane P; Hoh, Ryan; Holmes, Erin R; Gill, Amanpreet; Zamora, Lemuel

2017-07-15

The roles of pharmacy technicians are increasingly prominent given pharmacy's transition to patient-centered activities and evolving scopes of practice in many U.S. states and throughout the world. The aims of this study were to assess U.S. pharmacy technicians' self-efficacies for and attitudes toward performing current and emerging roles in hospital and in community pharmacy and to identify factors related to pharmacy technician self-efficacies in these roles. A total of 5000 pharmacy technicians from 8 U.S. states were sent an electronic survey eliciting data on current involvement, self-efficacies, and attitudes for practicing in an expansive list of practice activities. The 8 states from which the sample was drawn were selected from a stratified randomized procedure using U.S. Census Bureau geographically defined regions. Pre-notification and response reminders were employed. Data were analyzed descriptively and with univariate, inferential tests, as appropriate, to determine associations with commitment, practice environment, experience level, and other variables. Of the 612 participants who responded, 494 were currently working as a technician and not enrolled in a PharmD program of study. Participants reported various activities in which they were highly engaged. Overall, attitudes toward performing most of the activities and self-efficacies were quite favorable, even for those activities in which technicians were currently less involved. There were some notable differences between technicians practicing in community versus hospital settings. Years of experience, profession commitment, and advanced employee ranking were associated with higher levels of self-efficacy, overall. This initial examination of pharmacy technician self-efficacies identified areas that along with other factors could help employers with further expanding technician practice activities and vocational institutions with considerations for education and development of these key members of the workforce. The results would suggest technicians to be ready for continued evolution in their practice. Copyright © 2017 Elsevier Inc. All rights reserved.

A High School Level Course On Robot Design And Construction

NASA Astrophysics Data System (ADS)

Sadler, Paul M.; Crandall, Jack L.

1984-02-01

The Robotics Design and Construction Class at Sehome High School was developed to offer gifted and/or highly motivated students an in-depth introduction to a modern engineering topic. The course includes instruction in basic electronics, digital and radio electronics, construction skills, robotics literacy, construction of the HERO 1 Heathkit Robot, computer/ robot programming, and voice synthesis. A key element which leads to the success of the course is the involvement of various community assets including manpower and financial assistance. The instructors included a physics/electronics teacher, a computer science teacher, two retired engineers, and an electronics technician.

Data analyst technician: an innovative role for the pharmacy technician.

PubMed

Ervin, K C; Skledar, S; Hess, M M; Ryan, M

2001-10-01

The development of an innovative role for the pharmacy technician is described. The role of the pharmacy technician was based on a needs assessment and the expertise of the pharmacy technician selected. Initial responsibilities of the technician included chart reviews, benchmarking surveys, monthly financial impact analysis, initiative assessment, and quality improvement reporting. As the drug-use and disease-state management (DUDSM) program expanded, pharmacist activities increased, requiring the expansion of data analyst technician (DAT) duties. These new responsibilities included participation in patient assessment, data collection and interpretation, and formulary enforcement. Most recently, technicians' expanded duties include maintenance of a physician compliance profiling database, quality improvement reporting and graphing, active role in patient risk assessment and database management for adult vaccination, and support of financial impact monitoring for other institutions within the health system. This pharmacist-technician collaboration resulted a threefold increase in patient assessments completed per day. In addition, as the DUDSM program continues to expand across the health system, an increase in DAT resources from 0.5 to 1.0 full-time equivalent was obtained. The role of the DAT has increased the efficiency of the DUDSM program and has provided an innovative role for the pharmacy technician.

14 CFR Appendix A to Part 60 - Qualification Performance Standards for Airplane Full Flight Simulators

Code of Federal Regulations, 2011 CFR

2011-01-01

... handbooks, and other FAA links. c. The NSPM encourages the use of electronic media for all communication... period. (b) There is no minimum number of hours of FFS use required. (c) The identification of the...., instructor and/or technician training/checking requirements, record keeping, QMS program). (c) All of the...

Microcprocessing Computer Technician, Digital and Microprocessor Technician Program. Post-Graduate 5th Year.

ERIC Educational Resources Information Center

Carangelo, Pasquale R.; Janeczek, Anthony J.

Materials are provided for a two-semester digital and microprocessor technician postgraduate program. Prerequisites stated for the program include a background in DC and AC theory, solid state devices, basic circuit fundamentals, and basic math. A chronology of major topics and a listing of course objectives appear first. Theory outlines for each…

ATIP: Automotive Technician Internship Program.

ERIC Educational Resources Information Center

De Anza Coll., Cupertino, CA.

The Automotive Technology Department (ATD) of De Anza College (DAC) in Cupertino, California, in partnership with the Automotive Service Council of California, received funding to develop and implement a 2-year, competency-based certification program for automotive service technicians. Students in the Automotive Technician Internship Program…

Developing a Program for Water/Wastewater Technology.

ERIC Educational Resources Information Center

Valentine, Ivan E.; And Others

1979-01-01

Describes a water/wastewater technician program that provides: (1) entry-level skills for individuals seeking employment as water/wastewater technicians, (2) upgrading courses for operators and technicians already employed, and (3) instruction for those who are preparing for Colorado state water/wastewater certification. (LRA)

24 CFR 291.510 - Overview of the GNND Sales Program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Program enables a full-time law enforcement officer, teacher, or firefighter/emergency medical technician... the law enforcement officer, teacher, or firefighter/emergency medical technician finances the home... officers, teachers, and firefighters/emergency medical technicians prior to listing the properties for sale...

Nuclear Technology Series. Radiation Protection Technician. A Suggested Program Planning Guide. Revised June 80.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This program planning guide for a two-year postsecondary radiation protection technician program is designed for use with courses 17-22 of thirty-five included in the Nuclear Technology Series. The purpose of the guide is to describe the nuclear power field and its job categories for specialists, technicians, and operators; and to assist planners,…

Development and initial evaluation of a training program for peripherally inserted central catheter (PICC) placement for radiology residents and technicians.

PubMed

Dabadie, A; Soussan, J; Mancini, J; Vidal, V; Bartoli, J M; Gorincour, G; Petit, P

2016-09-01

The goals of this study were to develop and evaluate a joint theoretical/practical training course for radiology residents and technicians and to start a collaborative practice agreement enabling radiology technicians to perform PICC placement under the responsibility of an interventional radiologist. A joint training session based on literature evidences and international recommendations was designed. Participants were assessed before and after training, and were also asked to evaluate the program one month after completion of the training course. Practical post-training mentoring guidelines were laid down for radiologists supervising technicians. From January to April 2014, 6 radiology residents and 12 radiology technicians from the two interventional radiology departments of the University hospitals in Marseille took part in the training program. For both residents and technicians, significant improvement was observed between pretraining and post-training assessment. The majority of participants were satisfied with the program. Our experience suggests that combined theoretical and practical training in PICC placement allows improving technical skill and yields high degrees of satisfaction for both radiology residents and technicians. A collaborative practice agreement is now formally established to enable radiologists to delegate PICC placement procedures to radiology technicians. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Education and training for technicians in photonics-enabled technologies

NASA Astrophysics Data System (ADS)

Hull, Daniel M.; Hull, Darrell M.

2005-10-01

Within a few years after lasers were first made operational in 1960, it became apparent that rapid growth in the applications of this new technology in industry, health care, and other fields would require a new generation of technicians in laser/optics engineering. Technicians are the men and women who work alongside scientists and engineers in bringing their ideas, designs, and processes to fruition. In America, most highly qualified technicians are graduates of associate of applied science (AAS) programs in community and technical colleges (two-year postsecondary institutions). Curricula and educational programs designed to prepare technicians in laser/electro-optics technology (LEOT) emerged in the 1970s; today there are over 15 LEOT programs in the United States producing over 100 LEOT graduates each year.

Guide for Training Medical Laboratory Technicians. Fourth Edition.

ERIC Educational Resources Information Center

American Medical Technologists, Park Ridge, IL.

This document is intended to assist educators in the development of medical laboratory technician training programs. The following elements are included in the document: (1) an introduction; (2) the American Medical Technologists' Code of Ethics; (3) suggested curricula for medical laboratory technician programs for a 12-month course and an…

Auto Collision Technician: An Instructional Guide for Teachers.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide is designed to help teachers in auto collision technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the High Priority-Individual (HP-I) competencies in Ohio's Occupational Competency Assessment Profile (OCAP) for Auto Collision Technician. HP-I competencies are…

A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study

PubMed Central

Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

2016-01-01

Objective  The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Background Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential.  Method A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Results Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. Conclusions  A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent. PMID:27096134

A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study.

PubMed

Ahmed, Rami; Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

2016-03-16

OBJECTIVE : The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. CONCLUSIONS : A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent.

A voice-actuated wind tunnel model leak checking system

NASA Technical Reports Server (NTRS)

Larson, William E.

1989-01-01

A computer program has been developed that improves the efficiency of wind tunnel model leak checking. The program uses a voice recognition unit to relay a technician's commands to the computer. The computer, after receiving a command, can respond to the technician via a voice response unit. Information about the model pressure orifice being checked is displayed on a gas-plasma terminal. On command, the program records up to 30 seconds of pressure data. After the recording is complete, the raw data and a straight line fit of the data are plotted on the terminal. This allows the technician to make a decision on the integrity of the orifice being checked. All results of the leak check program are stored in a database file that can be listed on the line printer for record keeping purposes or displayed on the terminal to help the technician find unchecked orifices. This program allows one technician to check a model for leaks instead of the two or three previously required.

Electronics Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 27 units to consider for use in a tech prep competency profile for the occupation of electronics technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and would…

Work Force Preparation for Technician-Level Occupations.

ERIC Educational Resources Information Center

Harmon, Hobart L.

The Tech Prep Associate Degree (TPAD) program must be clearly focused on technician-level occupations, which are expected to have the greatest occupational growth. Generally, the preparation required to enter the work force at the technician level is completion of an associate degree program that includes 50 percent theory and 50 percent applied…

Analysis of Associate Degree Program for Traffic Safety Technicians. Final Report.

ERIC Educational Resources Information Center

Shimada, Jonathan K.

A study was conducted to evaluate the impact of the Associate Degree Program for Traffic Engineering Technicians (TET's) offered at three community colleges on students' subsequent job performance as technicians. Data were collected by means of personal interviews and telephone interviews with 81 students, their primary instructors, and their…

ASE Program Certification Standards for Automobile Technician Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This document presents and explains the development and application of the National Institute for Automotive Service Excellence (ASE) program certification standards that were developed to improve the quality of secondary- and postsecondary-level automobile technician training by implementing a certification program that certifies programs in…

Evaluating the accuracy of technicians and pharmacists in checking unit dose medication cassettes.

PubMed

Ambrose, Peter J; Saya, Frank G; Lovett, Larry T; Tan, Sandy; Adams, Dale W; Shane, Rita

2002-06-15

The accuracy rates of board-registered pharmacy technicians and pharmacists in checking unit dose medication cassettes in the inpatient setting at two separate institutions were examined. Cedars-Sinai Medical Center and Long Beach Memorial Medical Center, both in Los Angeles county, petitioned the California State Board of Pharmacy to approve a waiver of the California Code of Regulations to conduct an experimental program to compare the accuracy of unit dose medication cassettes checked by pharmacists with that of cassettes checked by trained, certified pharmacy technicians. The study consisted of three parts: assessing pharmacist baseline checking accuracy (Phase I), developing a technician-training program and certifying technicians who completed the didactic and practical training (Phase II), and evaluating the accuracy of certified technicians checking unit dose medication cassettes as a daily function (Phase III). Twenty-nine pharmacists and 41 technicians (3 of whom were pharmacy interns) participated in the study. Of the technicians, all 41 successfully completed the didactic and practical training, 39 successfully completed the audits and became certified checkers, and 2 (including 1 of the interns) did not complete the certification audits because they were reassigned to another work area or had resigned. In Phase II, the observed accuracy rate and its lower confidence limit exceeded the predetermined minimum requirement of 99.8% for a certified checker. The mean accuracy rates for technicians were identical at the two institutions (p = 1.0). The difference in mean accuracy rates between pharmacists (99.52%; 95% confidence interval [CI] 99.44-99.58%) and technicians, (99.89%; 95% CI 99.87-99.90%) was significant (p < 0.0001). Inpatient technicians who had been trained and certified in a closely supervised program that incorporated quality assurance mechanisms could safely and accurately check unit dose medication cassettes filled by other technicians.

Raising the Bar or Training Library Technicians To Assume Reference Responsibilities.

ERIC Educational Resources Information Center

Brandys, Barbara; Daghita, Joan; Whitmore, Susan

This paper reports on a program at the National Institutes of Health (NIH) Library that was instituted to train library technicians to work at the Information Desk as Reference Assistants; the objectives of the program were to train library technicians to become reference assistants, to free up librarians' time for new work assignments, and to…

Development of a Navy Job-Specific Vocational Interest Model

DTIC Science & Technology

2006-12-01

Enforcement Air Systems Installation/Repair Maritime Interests Applied Mathematics Media Arts Aviation Interests Medical and Dental Services...Technician (AS) 9. Aviation Electronics Technician (AT) 10. Aviation Maintenance Administrationman (AZ) 11. Culinary Specialist (CS) 12. Cryptologic...equipment. 90. Perform preventive and corrective maintenance on state-of-the- art electronic and electromechanical equipment and systems, requiring

Characteristics of Competency. Measurement Criteria for Entry-Level Electronics Technician Skills..

ERIC Educational Resources Information Center

Electronic Industries Foundation, Washington, DC.

This supplement to "Raising the Standard" details the knowledge and skills required to successfully achieve competence in each of the tasks identified in the standards manual. It is divided into five sections that correspond to the five skill categories for entry-level electronics technician: additional skills, desirable behavior and work habits,…

Forest Technician. 2+2 Articulated Curriculum in Agricultural Technology.

ERIC Educational Resources Information Center

York, Walter

This 2+2 articulated curriculum for the occupation of forest technician includes the following: program results and benefits; job description--forest technician; curriculum objective; duty and task listings for forest technician; recommended secondary and postsecondary course options flowchart; recommended student prerequisites; basic outlines for…

46 CFR 160.151-39 - Training of servicing technicians.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Training of servicing technicians. 160.151-39 Section...-39 Training of servicing technicians. (a) The training program for certification of servicing technicians must include— (1) Training and practice in packing an inflatable liferaft, repairing buoyancy...

Section 609 Technician Training and Certification Programs

EPA Pesticide Factsheets

EPA-approved programs for technicians who service motor vehicle air conditioning (MVAC) systems. Any person who repairs or services a MVAC system for consideration must be certified under section 609 of the Clean Air Act by an EPA-approved program.

New directions for veterinary technology.

PubMed

Chadderdon, Linda M; Lloyd, James W; Pazak, Helene E

2014-01-01

Veterinary technology has generally established itself well in companion-animal and mixed-animal veterinary medical practice, but the career's growth trajectory is uncertain. Michigan State University (MSU) convened a national conference, "Creating the Future of Veterinary Technology-A National Dialogue," in November 2011 to explore ways to elevate the veterinary technician/technologist's role in the veterinary medical profession and to identify new directions in which the career could expand. Veterinary technicians/technologists might advance their place in private practice by not only improving their clinical skills, but by also focusing on areas such as practice management, leadership training, business training, conflict resolution, information technology, and marketing/communications. Some new employment settings for veterinary technicians/technologists include more participation within laboratory animal medicine and research, the rural farm industry, regulatory medicine, and shelter medicine. Achieving these ends would call for new training options beyond the current 2-year and 4-year degree programs. Participants suggested specialty training programs, hybrid programs of various types, online programs, veterinary technician residency programs of 12-18 months, and more integration of veterinary technician/technology students and veterinary medicine students at colleges of veterinary medicine.

Respiratory Therapy and Respiratory Therapy Technician. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This program guide identifies primary considerations in the organization, operation, and evaluation of respiratory therapy and respiratory therapy technician programs. An occupational description and program content are presented. The curriculum framework specifies the exact course title, course number, levels of instruction, major course content,…

National Apprenticeship and Training Standards for Optical Technician (Contact Lens Technician). Revised.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

These national standards are intended to serve as a guide for the establishment of thorough and complete apprenticeship programs to produce trained optical technicians (contact lens technicians). Covered in the individual sections are the following topics: definitions, qualifications for apprenticeship, credit for previous experience, continuity…

The Library Technician Programme in Lebanon

ERIC Educational Resources Information Center

Rafidi, Samia

1973-01-01

A description of the library technician program established by the Beirut College for Women in February 1970: its curriculum, professional staff, students, and reactions produced by the program is presented. (Author/SJ)

Apprenticeship Training: Communication Technician Program.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton. Apprenticeship and Industry Training.

This document presents information about the apprenticeship training program of Alberta, Canada, in general and the communication technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee structure; local…

"Tech-check-tech": a review of the evidence on its safety and benefits.

PubMed

Adams, Alex J; Martin, Steven J; Stolpe, Samuel F

2011-10-01

The published evidence on state-authorized programs permitting final verification of medication orders by pharmacy technicians, including the programs' impact on pharmacist work hours and clinical activities, is reviewed. Some form of "tech-check-tech" (TCT)--the checking of a technician's order-filling accuracy by another technician rather than a pharmacist--is authorized for use by pharmacies in at least nine states. The results of 11 studies published since 1978 indicate that technicians' accuracy in performing final dispensing checks is very comparable to pharmacists' accuracy (mean ± S.D., 99.6% ± 0.55% versus 99.3% ± 0.68%, respectively). In 6 of those studies, significant differences in accuracy or error detection rates favoring TCT were reported (p < 0.05), although published TCT studies to date have had important limitations. In states with active or pilot TCT programs, pharmacists surveyed have reported that the practice has yielded time savings (estimates range from 10 hours per month to 1 hour per day), enabling them to spend more time providing clinical services. States permitting TCT programs require technicians to complete special training before assuming TCT duties, which are generally limited to restocking automated dispensing machines and filling unit dose batches of refills in hospitals and other institutional settings. The published evidence demonstrates that pharmacy technicians can perform as accurately as pharmacists, perhaps more accurately, in the final verification of unit dose orders in institutional settings. Current TCT programs have fairly consistent elements, including the limitation of TCT to institutional settings, advanced education and training requirements for pharmacy technicians, and ongoing quality assurance.

Preparing technicians for photonics industries and organizations

NASA Astrophysics Data System (ADS)

Souders, John; Hull, Dan

2012-10-01

U.S. photonics organizations need about 800 new photonics technicians each year. Thirty-one community and technical colleges have approximately 700 students enrolled in photonics related programs; about 275 of them complete their coursework and enter the workforce each year. A disparity exists between the demand and supply of qualified photonics technicians in the U.S. OP-TEC, the National Center for Optics and Photonics Education is a consortium of seven colleges, under the leadership of the University of Central Florida, and sponsored by NSF. OP-TEC's mission is to increase the quantity and quality of photonics technicians prepared at two-year colleges. OP-TEC maintains the National Photonics Skill Standards for Technicians, provides curriculum models, teaching materials, faculty training/professional development and planning services to strengthen existing college photonics programs and to attract and support new ones. OP-TEC is converting its text materials to E-Books to support students in technical programs. Through OP-TEC's recruitment efforts 84 additional colleges are interested in initiating new photonics programs. The OP-TEC Photonics College Network (OPCN) consists of 28 colleges that are currently providing photonics education. This fall OPCN will lead an additional national effort to further educate employed photonics technicians through on-line courses, complemented by lab experiences at nearby colleges. OP-TEC is expanding its outreach to photonics employers and colleges by regionalizing its approach to offering its services. OP-TEC is also planning to develop new curricula and instructional materials for AAS programs to prepare Precision Optics Technicians. This paper will detail OP-TEC's work with particular emphases on its materials and services.

Helping to Meet Today's Energy Demands: Natural Gas Technician Training in Algeria

ERIC Educational Resources Information Center

Dutton, Bernard

1976-01-01

The training program, located in Arzew, Algeria, is designed to train technicians in all phases of gas technology. The program provides classroom instruction, on-the-job training, and language instruction. The different phases involved in the training program are described. (EC)

Apprenticeship Training: Auto Body Technician Program.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton. Apprenticeship and Industry Training.

This document presents information about the apprenticeship training program of Alberta, Canada, in general and the auto body technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee structure; local…

Outdoor Power Equipment Technician Program. Apprenticeship Training.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton. Apprenticeship and Industry Training.

This document presents information about the apprenticeship training program of Alberta, Canada, in general and the outdoor power equipment technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee…

The Engineering Technician.

ERIC Educational Resources Information Center

American Society for Engineering Education, Washington, DC.

Occupational and educational information concerning 12 categories of engineering technicians and engineering technology is presented. This information covers the role of the technicians, student qualifications, typical job titles, and typical educational programs. The categories presented are (1) air conditioning, heating, and refrigeration, (2)…

An Analysis of the Effect of ASVAB Waivers on A-School Academic Attrition

DTIC Science & Technology

1990-12-01

6224 6537 Boiler Technician ( 4YO ) (BT4) 6260 6486 Boiler Technician (6YO) 614F 614H 6488 Cryptologic Maintenance Technician (CTM) 605A 6161 Electronics...Systems Technician Electrical (6YO) (GSE) 606C 614N 614R Gas Turbine Systems Technician Mechanical (GSM) 614W 614T Machinist’s Mate ( 4YO ) (M*4) 6262...19.05) 4 (17.39) 58 M.( 4YO 372 (29.29) 54 (29.19) 29 (38.67) 455 IM6YO 30 (9.87) 4 (9.30) * 34 OH 18 (69.23) 4 (100) * 22 OS 296 (18.90) 42 (28.19) 6

ASE Program Certification Standards for Automobile Technician Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This publication provides the evaluation policies, procedures, and standards to which an automobile technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…

Cooperative Demonstration Program To Train Aviation Maintenance Technicians. Final Report.

ERIC Educational Resources Information Center

Alabama Aviation and Technical Coll., Ozark.

The Alabama Aviation and Technical College, working with representatives of the aviation industry, the military, the Alabama Department of Aeronautics, and the Federal Aviation Administration, developed a training program for aviation maintenance technicians. The program also aimed to emphasize and expand opportunities for minorities, females, and…

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

ASE Program Certification Standards for Collision Repair & Refinish Technician Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This publication provides the evaluation policies, procedures, and standards to which an auto body technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…

Reserve Training. An Alternative to the Active Army Education Program for National Guard Technicians. Report to Congressional Requesters.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of National Security and International Affairs.

A study examined the Military Education Program (MEP) for Army National Guard technicians. The MEP is an active Army program providing leadership and advanced military occupational specialty technical training. The primary objectives of the study were to determine whether the revised Reserve Component Noncommissioned Officer Education Program is a…

Import Auto Technician; Curriculum Guide for the Development of an Import Automobile Technology Program.

ERIC Educational Resources Information Center

East Los Angeles Coll., CA.

In this curriculum guide, courses in a three-phase community college program for training import automobile technicians are provided. Following an introducation to the guide, the background of the development of the program, the program, the instruction, support for instruction, and the import automobile industry are discussed. Sample options for…

Technician Career Opportunities in Engineering Technology.

ERIC Educational Resources Information Center

Engineers' Council for Professional Development, New York, NY.

Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

Solar Technician Program Blows Hot

ERIC Educational Resources Information Center

Ziegler, Peg Moran

1977-01-01

A training program for solar heating technicians was initiated at Sonoma State College's School of Environmental Studies for CETA applicants. Among the projects designed and built were a solar alternative energy center, a solar hot water system, and a solar greenhouse. (MF)

Health Occupations Cluster. Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Simpson, Bruce; And Others

This curriculum guide was designed for use in secondary health occupations education programs in Georgia. It provides a model for organizing vocational instructional content in health occupations, such as nurse, dental assistant, medical lab technician, radiologic technician, emergency medical technician, respiratory therapy assistant, medical…

Laser Technician Associate Degree Program. A Proposal Submitted to Wisconsin State Board of Vocational, Technical, and Adult Education. (Curriculum Development.) Final Report.

ERIC Educational Resources Information Center

North Central Technical Inst., Wausau, WI.

This final report contains the program proposal with supporting data for developing curriculum materials for and implementing an associate-degree laser technology program at the North Central Technical Institute. The proposal outline provides this information: (1) objectives for the program designed to prepare a technician to safely operate,…

ASE Program Certification Standards for Medium/Heavy Truck Technician Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This publication provides the evaluation policies, procedures, and standards to which a medium/heavy truck technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…

40 CFR Appendix D to Subpart F of... - Standards for Becoming a Certifying Program for Technicians

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 18 2013-07-01 2013-07-01 false Standards for Becoming a Certifying Program for Technicians D Appendix D to Subpart F of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and...

40 CFR Appendix D to Subpart F of... - Standards for Becoming a Certifying Program for Technicians

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Standards for Becoming a Certifying Program for Technicians D Appendix D to Subpart F of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and...

40 CFR Appendix D to Subpart F of... - Standards for Becoming a Certifying Program for Technicians

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Standards for Becoming a Certifying Program for Technicians D Appendix D to Subpart F of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and...

40 CFR Appendix D to Subpart F of... - Standards for Becoming a Certifying Program for Technicians

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Standards for Becoming a Certifying Program for Technicians D Appendix D to Subpart F of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and...

40 CFR Appendix D to Subpart F of... - Standards for Becoming a Certifying Program for Technicians

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Standards for Becoming a Certifying Program for Technicians D Appendix D to Subpart F of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and...

Bossier Parish Community College and Delgado Community College Collaborative Pharmacy Technician Program Distance Education Initiative.

ERIC Educational Resources Information Center

Bossier Parish Community Coll., Bossier City, LA.

Two Louisiana community colleges--Bossier Parish Community College (BPCC) and Delgado Community College (DCC)--proposed, developed, and implemented a collaborative Pharmacy Technician program for delivery through the use of two-way interactive video. The new program was inspired by new certification requirements instituted by the state of…

Grant Activities for U.S. Department of Education Business & Education Standards Program. Final Report.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

A project was conducted by the National Automotive Technicians Education Foundation to review and update the standards for automobile, collision repair and refinishing, and medium and heavy truck technician training programs. The standards include a task list, tools and equipment requirements, program hour requirements, instructor qualifications,…

Validation Study of Armed Services Vocational Aptitude Battery (ASVAB) Selector Composites: Gas Turbine System Technician Rating, Electrical (GSE) and Mechanical (GSM), for 4- and 6-Year Obligor Programs

DTIC Science & Technology

1991-12-01

GSE) and Mechanical (GSM), 4- and 6-year obligor ( 4YO / 6YO) programs. The ASVAB consists of the following ten tests: General Science (GS), Arithmetic...Mathematics Knowledge (MK), Mechanical Comprehension (MC), and Electronics Information (El). The study recommends that (1) GSE 4YO retain the operational...composite, AR+MK+EI+GS, but raise the minimum qualifying score (MQS) from 200 to 204, (2) GSM 4YO replace the operational composite, MK+AS, with AR+MK

A Guide for Planning Facilities for Occupational Preparation Programs for Dental Laboratory Technicians. Research Series No. 34.

ERIC Educational Resources Information Center

Macconnell, James D., And Others

The twelfth in a series also including guides for facilities for medical x-ray technologist, medical assistant, and medical secretary programs, the document is intended for use in the preparation of educational specifications for facilities for dental laboratory technician programs. Designed for use by those responsible for planning facilities,…

A Guide for Planning Facilities for Occupational Preparation Programs for Medical X-Ray Technicians. Research 31.

ERIC Educational Resources Information Center

Macconnell, James D.; And Others

The major purpose of this guide is to develop the necessary information for the writing of educational specifications to house medical x-ray technician programs. The guide is also designed to: (1) assist planners in the formation of creative housing solutions for desired educational programs, (2) prevent important considerations from being…

Illinois Occupational Skill Standards: Telecommunications Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment in the telecommunications technician occupational cluster. The document begins with a brief overview of the Illinois perspective on occupational skills standards…

Technician Training in Environmental Health Science

ERIC Educational Resources Information Center

Smith, Robert G.; Sherman, Alan

1976-01-01

The Environmental Health Science Technology Program was initiated by Middlesex County College in 1971 to provide the trained personnel needed by industry and government. Major areas needing environmental health technicians, the environmental health technology curriculum, and the on-the-job-training internship program are discussed. (BT)

Evaluating Three Allied Health Training Programs: Exploratory Research into Curriculum Relevance and Labor Market Conditions

ERIC Educational Resources Information Center

Appel, Gary L.; And Others

1977-01-01

Presents results of a research effort designed to develop a methodology for assisting dietetic technicians, physical therapist assistants, and medical record technicians curriculum relevance, and to better understand labor market conditions affecting the utilization and distribution of midlevel technicians. (Author/LAS)

The Operating Technician's Role in Video Distance Learning.

ERIC Educational Resources Information Center

Olesinski, Raymond L.; And Others

Operating technicians play a number of roles in video, or televised, distance learning programs, the most obvious being the operation and support of the technology itself. Very little information exists, however, about the non-technical activities of technicians that may influence the instruction process. This paper describes these activities…

Apprenticeship and Training Policy for Dental Laboratory Technicians.

ERIC Educational Resources Information Center

National Association of Dental Labs., Inc., Washington, DC.

The dental technician performs completely one or more specialized areas of the dental laboratory procedures required in the creation of a dental appliance. Policies of the 8000 hour apprenticeship program are explained in terms of qualifications, apprenticeship terms and agreement, ratio of apprentices to technicians, probationary period, credit…

ChemTechLinks: Alliances for Chemical Technician Education

NASA Astrophysics Data System (ADS)

Nameroff, Tamara

2003-09-01

ChemTechLinks (CTL) is a project of the American Chemical Society (ACS) Educational and International Activities Division and funded by the National Science Foundation to support and advance chemistry-based technician education. The project aims to help improve technician education programs, foster academic-industry alliances, provide professional development opportunities for faculty, and increase student recruitment into chemical technology. The CTL Web site serves as an information clearinghouse and link to other ACS resources and programs, including a Web-based, Voluntary Industry Standards (VIS) database, the Chemistry Technician Program Approval Service, the College Chemistry Consultants Service, summer workshops for high school teachers and two-year college faculty that emphasize a technology-oriented curriculum, scholarships for two-year college faculty to attend ACS Short Courses, a self-study instructional guide for faculty to use in preparing for classroom instruction, and information and free recruitment materials about career opportunities in chemistry technology.

V-TECS Guide for Automobile Engine Performance Technician.

ERIC Educational Resources Information Center

Meyer, Calvin F.; Benson, Robert T.

This guide is intended to assist teachers responsible for instructing future auto engine performance technicians. The following topics are covered: diagnosing engine performance problems, ignition system problems, fuel system problems, mechanically related performance problems, emission control system problems, and electronic control systems;…

Illinois Occupational Skill Standards: Automotive Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the automotive technician cluster. The document begins with overviews of the Illinois perspective on occupational skill standards and…

Engineering Technician Standards.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

The booklet describes the program offerings, requirements, training, and pay schedules of the Langley Research Center Technician Training Program. Training schedules and the duties expected upon completion of each of the training areas are specified, along with on-the-job and academic requirements. The areas of training are: engineering draftsman,…

Report on the Development of a Close Range Photogrammetry (CRP) Educational Technician Program (Museum and Archive Use).

ERIC Educational Resources Information Center

Kobelin, Joel

A close range photogrammetry (CRP) technician training program was developed at Miami-Dade Community College and used to teach the technology to 16 students. Although the results of the study show that it is possible to teach CRP in a two-year program, the technology is too new in the United States to support a sustaining educational program. The…

Internet treatment for depression: a randomized controlled trial comparing clinician vs. technician assistance.

PubMed

Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen

2010-06-08

Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Would guidance from a technician be as effective as guidance from a clinician? Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health QUESTIONnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for depression. This form of treatment has potential to increase the capacity of existing mental health services. Australian New Zealand Clinical Trials Registry ACTRN12609000559213.

Internet Treatment for Depression: A Randomized Controlled Trial Comparing Clinician vs. Technician Assistance

PubMed Central

Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen

2010-01-01

Background Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Question: Would guidance from a technician be as effective as guidance from a clinician? Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health Questionnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for depression. This form of treatment has potential to increase the capacity of existing mental health services. Trial Registration Australian New Zealand Clinical Trials Registry ACTRN12609000559213 PMID:20544030

Forgotten hardware: how to urinate in a spacesuit.

PubMed

Hollins, Hunter

2013-06-01

On May 5, 1961, astronaut Alan Shepard became the first American to fly in space. Although National Aeronautics and Space Administration (NASA) had discounted the need for him to urinate, Shepard did, in his spacesuit, short circuiting his electronic biosensors. With the development of the pressure suit needed for high-altitude and space flight during the 1950s, technicians had developed the means for urine collection. However, cultural mores, combined with a lack of interagency communication, and the technical difficulties of spaceflight made human waste collection a difficult task. Despite the difficulties, technicians at NASA created a successful urine collection device that John Glenn wore on the first Mercury orbital flight on February 20, 1962. With minor modifications, male astronauts used this system to collect urine until the Space Shuttle program. John Glenn's urine collection device is at the National Air and Space Museum and has been on view to the public since 1976.

A STUDY TO DETERMINE THE NEED AND TYPE OF TRAINING PROGRAM FOR AGRICULTURAL PUBLIC SERVICE TECHNICIANS.

ERIC Educational Resources Information Center

Mount San Antonio Coll., Walnut, CA.

THE OBJECTIVE WAS TO STUDY AGRICULTURAL PUBLIC SERVICE TECHNICIANS IN THE STATE TO DETERMINE (1) THE NUMBER EMPLOYED BY FEDERAL, STATE, AND LOCAL AGENCIES, (2) EXISTING SHORTAGES, (3) THE TYPE OF TRAINING NEEDED, (4) DESIRABILITY OF TRAINING PROGRAM AT MT. SAN ANTONIO COLLEGE, (5) EQUIPMENT AND PROGRAMS NEEDED, AND (6) EQUIPMENT NEEDED IN A…

Guidelines for a Training Program for Audiometric Technicians. Report of Working Group 66.

ERIC Educational Resources Information Center

Glorig, Aram, Ed.; And Others

The document outlines a course designed to train audiometric technicians who will conduct pure-tone conduction tests as part of a program on hearing conservation in noise. A minimum of two days is required for the completion of the course. The outline of the training program presents nine topics with an indication of the minimum time required for…

Essentials of an Acceptable School for Medical Record Technicians.

ERIC Educational Resources Information Center

American Medical Association, Chicago, IL. Council on Medical Education.

The Council on Medical Education of the American Medical Association in collaboration with the American Association of Medical Record Librarians establishes standards for medical record technician education, surveys and approves educational programs, and publishes lists of approved programs. The standards presented are intended as a guide for…

Implementing Computer Integrated Manufacturing Technician Program.

ERIC Educational Resources Information Center

Gibbons, Roger

A computer-integrated manufacturing (CIM) technician program was developed to provide training and technical assistance to meet the needs of business and industry in the face of the demands of high technology. The Computer and Automated Systems Association (CASA) of the Society of Manufacturing Engineers provided the incentive and guidelines…

Education of Technicians for Water Conservation and Wastewater Control.

ERIC Educational Resources Information Center

Brooking, Walter J.

There is a growing need for supportive personnel with technical preparation in water and wastewater purification and water resource conservation. A curriculum and program guide was developed in 1965-66 by Fayetteville Technical Institute for use by institutions interested in establishing a program to educate technicians. Meeting the need for…

Data Processing Technology, A Suggested 2-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Central Texas Coll., Killeen.

This guide identifies technicians, states specific job requirements, and describes special problems in defining, initiating, and operating post-high school programs in data processing technology. The following are discussed: (1) the program (employment opportunities, the technician, work performed by data processing personnel, the faculty, student…

A PROGRAM FOR ARCHITECTURAL TECHNICIAN'S TRAINING.

ERIC Educational Resources Information Center

TERNSTROM, CLINTON C.; AND OTHERS

ARCHITECTURAL TECHNICIANS TRANSLATE DESIGN AND SYSTEMS SOLUTIONS INTO GRAPHIC AND WRITTEN FORM AND ASSIST IN RENDERING ARCHITECTURAL SERVICES. IN 1966, A STUDY GROUP FROM THE AMERICAN INSTITUTE OF ARCHITECTS FOUND THAT EXISTING 2-YEAR PROGRAMS WERE INADEQUATE, FALLING INTO ONE OF TWO CATEGORIES--(1) DRAFTING COURSES WHICH LACKED BREADTH AND FAILED…

Illinois Occupational Skill Standards. Collision Repair Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the (vehicle) collision repair technician cluster. It begins with a brief overview of the Illinois perspective on occupational skill standards…

Electromechanical Technician Skills Questionnaire.

ERIC Educational Resources Information Center

Anoka-Hennepin Technical Coll., Minneapolis, MN.

This document contains test items to measure the job skills of electromechanical technicians. Questions are organized in four sections that cover the following topics: (1) shop math; (2) electricity and electronics; (3) mechanics and machining; and (4) plumbing, heating, ventilation and air conditioning, and welding skills. Questions call for…

Pharmacy technician involvement in community pharmacy medication therapy management.

PubMed

Lengel, Matthew; Kuhn, Catherine H; Worley, Marcia; Wehr, Allison M; McAuley, James W

To assess the impact of technician involvement on the completion of medication therapy management (MTM) services in a community pharmacy setting and to describe pharmacists' and technicians' perceptions of technician involvement in MTM-related tasks and their satisfaction with the technician's role in MTM. Prospective observational study. In the fall of 2015, pharmacists and selected technicians from 32 grocery store-based community pharmacies were trained to use technicians within MTM services. Completed MTM claims were evaluated at all pharmacies for 3 months before training and 3 months after training. An electronic survey, developed with the use of competencies taught in the training and relevant published literature, was distributed via e-mail to trained employees 3 months after training. The total number of completed MTM claims at the 32 pharmacy sites was higher during the posttraining time period (2687 claims) versus the pretraining period (1735 claims). Of the 182 trained participants, 112 (61.5%) completed the survey. Overall, perceived technician involvement was lower than expected. However, identifying MTM opportunities was the most commonly reported technician MTM task, with 62.5% of technicians and 47.2% of pharmacists reporting technician involvement. Nearly one-half of technicians (42.5%) and pharmacists (44.0%) agreed or strongly agreed they were satisfied with the technician's role in MTM services, and 40.0% of technicians agreed that they were more satisfied with their work in the pharmacy after involvement in MTM. Three months after initial training of technicians in MTM, participation of technicians was lower than expected. However, the technicians involved most often reported identifying MTM opportunities for pharmacists, which may be a focus for future technician trainings. In addition, technician involvement in MTM services may increase satisfaction with many aspects of work for actively involved technicians. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Job-Oriented Basic Skills (JOBS) Program for the Acoustic Sensor Operations Strand.

ERIC Educational Resources Information Center

U'Ren, Paula Kabance; Baker, Meryl S.

An effort was undertaken to develop a job-oriented basic skills curriculum appropriate for the acoustic sensor operations area, which includes members of four ratings: ocean systems technician, aviation antisubmarine warfare operator, sonar technician (surface), and sonar technician (submarine). Analysis of the job duties of the four ratings…

Physical Science Experiments for Scientific Glassblowing Technicians.

ERIC Educational Resources Information Center

Tillis, Samuel E.; Donaghay, Herbert C.

The twenty experiments in this text have been designed to give the scientific glassblowing technician the opportunity to use scientific glass apparatus in the study of physical science. Primary emphasis of these experiments is on the practical application of the physical science program as a working tool for the scientific glassblowing technician.…

Collegiate Aviation Maintenance Training Programs Certified under 14CFR Part 147 that Are Members of the Aviation Technician Education Council

ERIC Educational Resources Information Center

Hunt, Terry Lile

2010-01-01

Scope and method of study: The purpose of this study was to construct a descriptive analysis of aviation maintenance training programs that confer the Bachelor of Science degree and who are members of the Aviation Technician Education Council. The sample was comprised of the 11 educational programs within the population that met these criteria.…

Work group design in pharmacy: the pharmacist-technician team.

PubMed

Kershaw, B P; Solomon, D K; Zarowitz, B J

1987-05-01

The contemporary pharmacy practice manager faces the challenge of designing pharmacy service programs that not only satisfy the needs of the patient, but at the same time satisfy and motivate the pharmacists and technicians who sustain the programs. This research examined the team design, which has been recommended but not fully described in the literature. This application did not explore the full potential of the team design in the hospital pharmacy setting. More study is needed in this area to assess the impact of work group design on the expansion of clinical programs, employee turnover rates, quality and quantity of work produced, and, most important, the impact on job satisfaction enjoyed by pharmacists and technicians.

10 CFR 50.120 - Training and qualification of nuclear power plant personnel.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...

10 CFR 50.120 - Training and qualification of nuclear power plant personnel.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...

10 CFR 50.120 - Training and qualification of nuclear power plant personnel.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...

Illinois Occupational Skill Standards: Agricultural Laboratory and Field Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

These Illinois skill standards for the agricultural laboratory and field technician cluster are intended to serve as a guide to workforce preparation program providers as they define content for their programs and to employers as they establish the skills and standards necessary for job acquisition. They could also serve as a mechanism for…

School Administration Handbook for Approved Schools for Medical Record Technicians. Revised April 66.

ERIC Educational Resources Information Center

American Association of Medical Record Librarians, Chicago, IL.

These guidelines are for the development and operation of approved programs to prepare medical record technicians. "School Approval" discusses the cooperative roles of the American Medical Association (AMA) Council on Medical Education and the American Association of Medical Record Librarians (AAMRL) in connection with program approval,…

Impact of Community College of Philadelphia Allied Health Programs on the Philadelphia Region. Report #117.

ERIC Educational Resources Information Center

Philadelphia Community Coll., PA.

This report discusses the Allied Health programs at Community College of Philadelphia (CCP): (1) Clinical Laboratory Technician; (2) Dental Assisting Hygiene; (3) Dental Assisting Certificate; (4) Diagnostic Medical Imaging; (5) Dietetic Technician; (6) Health Information Technology; (7) Medical Assisting and Office Management; (8) Nursing; and…

Illinois Occupational Skill Standards: Landscape Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document of skill standards for the landscape technician cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 19 occupational skill standards describe what people should know and be able to do in…

Illinois Occupational Skill Standards: Agricultural Machinery Service Technician.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

These Illinois skill standards for agriculture machinery service technician are intended to serve as a guide to workforce preparation program providers as they define content for their programs and to employers as they establish the skills and standards necessary for job acquisition. They could also serve as a mechanism for communication among…

Basic Training Program for Emergency Medical Technician Ambulance: Course Guide.

ERIC Educational Resources Information Center

Fucigna, Joseph T.; And Others

In an effort to upgrade or further develop the skills levels of all individuals involved in the emergency medical care service, this training program was developed for the National Highway Safety Bureau. This specific course is an attempt to organize, conduct, and standardize a basic training course for emergency medical technicians (EMTs). The…

Animal Health Technicians: A Survey of Program Graduates and of Veterinarians.

ERIC Educational Resources Information Center

Barsaleau, Richard B.; Walters, Henry R.

This document compiles the reports of two surveys conducted by Cosumnes River College to determine the status of graduates of its Animal Health Technician program, and to assess the acceptance and use of such paraprofessionals by area veterinarians. Information concerning type of employment, state certification, salaries, types of duties, length…

Development of a Competency-Based Curriculum for Upgrading Water Treatment Technicians. Final Report.

ERIC Educational Resources Information Center

Ross-Harrington, Melinda

The major purpose of a project has been to develop an instructional program for training water treatment technicians through the cooperative efforts of industry, the regulatory agency (West Virginia State Department of Health), and vocational education. After the appropriate job competencies were identified, a program was developed combining a…

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CODING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-35.0)

EPA Science Inventory

The purpose of this SOP is to define the coding strategy for the Technician Walk-Through Questionnaire. This questionnaire was developed for use during the Arizona NHEXAS project and the Border study. Keywords: data; coding; technician walk-through questionnaire.

The U.S.-Mexi...

Aviation Warrant Officer Program and Enlisted Aviator Study

DTIC Science & Technology

1977-11-01

MOS. No direct appointment into this MOS. (b) 961A (ATTACHE TECHNICIAN) Entry and advanced MOS. (c) 221B ( NIKE MISSILE ASSEMBLY TECHNICIAN) Entry MOS...Advanced level is MOS, 251B (Air Defense Missile System Repair Technician, NIKE ) (d) 963A (INTERROGATION TECHNICIAN) Entry and advanced MOS, but...30 SEP 77 021A - Club Manager 9 2 222B - AD MSL Fire Tech, Nike 13 39 *Authorization equals 10.0% of the assigned strength for FY 77. 18 To make a

Final Prep on SSME

NASA Image and Video Library

2005-10-25

Alvin Pittman Sr., lead electronics technician with Pratt & Whitney Rocketdyne, and Janine Cuevas, a mechanical technician with PWR, perform final preparations on the space shuttle main engine tested Oct. 25, 2005, at NASA's Stennis Space Center. It was the first main engine test since Hurricane Katrina hit the Gulf Coast on Aug. 29.

Final Prep on SSME

NASA Technical Reports Server (NTRS)

2005-01-01

Alvin Pittman Sr., lead electronics technician with Pratt & Whitney Rocketdyne, and Janine Cuevas, a mechanical technician with PWR, perform final preparations on the space shuttle main engine tested Oct. 25, 2005, at NASA's Stennis Space Center. It was the first main engine test since Hurricane Katrina hit the Gulf Coast on Aug. 29.

Internet treatment for generalized anxiety disorder: a randomized controlled trial comparing clinician vs. technician assistance.

PubMed

Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen

2010-06-03

Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for GAD. This form of treatment has potential to increase the capacity of existing mental health services. Australian New Zealand Clinical Trials Registry ACTRN12609000563268.

Internet Treatment for Generalized Anxiety Disorder: A Randomized Controlled Trial Comparing Clinician vs. Technician Assistance

PubMed Central

Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen

2010-01-01

Background Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for GAD. This form of treatment has potential to increase the capacity of existing mental health services. Trial Registration Australian New Zealand Clinical Trials Registry ACTRN12609000563268 PMID:20532167

Fiberglass Technician Technical Terms. English-Thai Lexicon. Introduction to Fiberglass Technician. Thai Version. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Shin, Masako T.

This English-Thai lexicon and program introduction for fiberglass technician is one of eight documents in the Multicultural Competency-Based Vocational/Technical Curricula Series. It is intended for use in postsecondary, adult, and preservice teacher and administrator education. The first two sections provide Thai equivalencies of English…

An Examination of the Effects of First-Term Career Progression on Navy A-School Attrition and the Military Experiences of A-School Students After Attrition

DTIC Science & Technology

1991-06-01

614S 6718 21.9 Technician Elec (GSE- 4YO ) Avionics Technician- 6240 21.8 Aviation Control Tech- 4YO (AQ- 4YO ) Boiler Technician PSI- 4YO 601G 6260 6486 21.3...BT- 4YO ) Electronics Technician 6723 6708 6711 21.3 Submarine (ET-SS) Strategic Weapons Systems 6371 6146 615S 615T 20.7 (SWS) Gas Turbine Systems...601G 614W 614T 6720 20.4 Technicien Mech (GSM- 4YO ) Machinist’s Mate Nuclear 611N 130E 191.8 Field (MMN) SOURCES: Chief of Naval Education and Training

A Competency-Based Clinical Chemistry Course for the Associate Degree Medical Laboratory Technician Graduate in a Medical Technology Baccalaureate Program.

ERIC Educational Resources Information Center

Buccelli, Pamela

Presented is a project that developed a competency-based clinical chemistry course for associate degree medical laboratory technicians (MLT) in a medical technology (MT) baccalaureate program. Content of the course was based upon competencies expected of medical technologists at career-entry as defined in the statements adopted in 1976 by the…

Development and Evaluation of a Continuing Education Program for Nursing Technicians at a Pediatric Cardiac Intensive Care Unit in a Developing Country.

PubMed

Borim, Bruna Cury; Croti, Ulisses A; Silveira, Patricia C; De Marchi, Carlos H; Moscardini, Airton C; Hickey, Patricia; Jenkins, Kathy

2017-11-01

The nursing profession faces continuous transformations demonstrating the importance of professional continuing education to extend knowledge following technological development without impairing quality of care. Nursing assistants and technicians account for nearly 80% of nursing professionals in Brazil and are responsible for uninterrupted patient care. Extensive knowledge improvement is needed to achieve excellence in nursing care. The objective was to develop and evaluate a continuing education program for nursing technicians at a pediatric cardiac intensive care unit (PCICU) using a virtual learning environment entitled EDUCATE. From July to September 2015, a total of 24 nursing technicians working at the PCICU at a children's hospital located in the northwestern region of São Paulo state (Brazil) fully participated in the continuing education program developed in a virtual learning environment using Wix platform, allowing access to video classes and pre- and post-training theoretical evaluation questionnaires outside the work environment. The evaluation tools recorded participants' knowledge evolution, technological difficulties, educational, and overall rating. Knowledge development was descriptively presented as positive in more than 66.7%. Content and training were considered "excellent" by most participants and 90% showed an interest in the use of technological resources. Technical difficulties were found and quickly resolved by 40% of participants including Internet access, login, and lack of technical expertise. The continuing education program using a virtual learning environment positively contributed to the improvement in theoretical knowledge of nursing technicians in PCICU.

A NASA technician paints NASA's first Orion full-scale abort flight test crew module.

NASA Image and Video Library

2008-03-31

A full-scale flight-test mockup of the Constellation program's Orion crew vehicle arrived at NASA's Dryden Flight Research Center in late March 2008 to undergo preparations for the first short-range flight test of the spacecraft's astronaut escape system later that year. Engineers and technicians at NASA's Langley Research Center fabricated the structure, which precisely represents the size, outer shape and mass characteristics of the Orion space capsule. The Orion crew module mockup was ferried to NASA Dryden on an Air Force C-17. After painting in the Edwards Air Force Base paint hangar, the conical capsule was taken to Dryden for installation of flight computers, instrumentation and other electronics prior to being sent to the U.S. Army's White Sands Missile Range in New Mexico for integration with the escape system and the first abort flight test in late 2008. The tests were designed to ensure a safe, reliable method of escape for astronauts in case of an emergency.

Installing Electronics in Juno Vault

NASA Image and Video Library

2010-12-16

Technicians install components that will aid with guidance, navigation and control of NASA Juno spacecraft. Like most of Juno sensitive electronics, these components are situated within the spacecraft titanium radiation vault.

Economic Returns to Sub-Baccalaureate Technical Education: A Study of Labor Market Outcomes for Manufacturing Engineering Technologist and Technician Education (METTE) Programs in the Wisconsin Technical College System

ERIC Educational Resources Information Center

Matheny, Christopher J.

2013-01-01

The purpose of this study is to examine the labor market outcomes of sub-baccalaureate education for individuals attending Manufacturing Engineering Technologist and Technician Education (METTE) programs in the Wisconsin Technical College System. Increasingly, public policy for postsecondary education and economic development, as well as decisions…

Assistance with Obtaining a Replacement Card Form

EPA Pesticide Factsheets

Form to be submitted to Section 608 Technician Certification Program Manager if a technician wants to replace a certification card, and the record of the original certification is in the data submitted by companies that have gone out of business.

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--TECHNICIAN WALKTHROUGH QUESTIONNAIRE DATA

EPA Science Inventory

The Technician Walk-through Questionnaire data set updates information about each household from the Descriptive Questionnaire and includes relevant information regarding dwelling arrangements, as well as interior and exterior residential characteristics. The information is from...

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories

PubMed Central

Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N’Faly; Martel, Lise D.; Dahourou, Anicet George

2017-01-01

Background Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Methods and findings Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. Conclusions The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation. PMID:29190713

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories.

PubMed

VanSteelandt, Amanda; Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N'Faly; Martel, Lise D; Dahourou, Anicet George

2017-01-01

Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation.

Implementation of a pharmacy technician-centered medication reconciliation program at an urban teaching medical center.

PubMed

Sen, Sanchita; Siemianowski, Laura; Murphy, Michelle; McAllister, Susan Coutinho

2014-01-01

An inpatient medication reconciliation (MR) program emphasizing pharmacy technicians' role in the MR process is described. As part of quality-improvement (QI) efforts focused on MR-related adverse drug events, an urban academic medical center in New Jersey implemented a pharmacy technician-centered MR (PTMR) program targeting patients on its internal medicine, oncology, and clinical decision units. The program is staffed by five full- or part-time technicians who are trained in MR methods and work under direct pharmacist supervision, interviewing newly admitted patients and using other information sources (e.g., community pharmacies, physician offices, nursing facilities) to compile an accurate and complete medication list. About 30% of all patients admitted to the hospital are served by the PTMR program, which averages more than 500 cases each month. During one three-month period, 1748 discrepancies on preadmission medication lists were identified, most of which involved the omission of drugs (65.7% of cases) and incorrect information on dose and frequency of use (14.4%). Efforts to overcome resource constraints and other program challenges (e.g., privacy concerns, delays in community pharmacy transmittal of prescription refill lists) are ongoing. To date, most research on PTMR has been conducted in emergency departments or perioperative settings; experience with the PTMR program suggests that this approach can be applied in other hospital areas to improve MR processes and, ultimately, enhance pharmacotherapy safety and effectiveness across transitions of care. Based on experience, providers' perspectives, and QI data, the PTMR program is an effective method to obtain, document, and communicate accurate MR data for patients at this institution.

Protecting Juno Electronics from Radiation

NASA Image and Video Library

2010-07-12

Technicians installed the special radiation vault for NASA Juno spacecraft on the propulsion module. The radiation vault has titanium walls to protect the spacecraft electronic brain and heart from Jupiter harsh radiation environment.

Automotive Technician II for ICT. Instructor's Guide, Curriculum Guide, and Student's Manual.

ERIC Educational Resources Information Center

Notgrass, Troy; Snider, Bob

The instructor's guide and curriculum guide contained in this packet are designed to help teachers provide future automotive technicians with some of the electronic skills they will need to service cars of the future. The instructor's guide is designed to help teachers make certain that each student gets the most benefit possible out of both the…

Dental Assistants, Technicians and Hygienists. Career Focus, volume 5, no. 1.

ERIC Educational Resources Information Center

Reese, Susan

2003-01-01

Includes three articles: "Lending a Hand for Good Dental Health,""A Promising Career Path," and "Dental Laboratory Technicians." Describes careers related to the dental field and the dental programs at various career centers, community colleges, and universities. (JOW)

General Electronics Technician.

ERIC Educational Resources Information Center

Vorderstrasse, Ron; Huston, Jane, Ed.

This module follows the "Basic Electronics" module as a guide for a course preparing students for job entry or further education. It includes those additional tasks required above Basic Electronics for job entry in the electronics field. The module contains eight instructional units that cover the following topics: (1) test equipment; (2)…

75 FR 8316 - Office of Postsecondary Education; Overview Information; Erma Byrd Scholarship Program; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... Transmittal of Applications: March 26, 2010. Full Text of Announcement I. Funding Opportunity Description... related to industrial health and safety: Mining and mineral engineering, industrial engineering... technology/technician, hazardous materials information systems technology/technician, mining technology...

TRAINING NUCLEAR TECHNICIANS.

ERIC Educational Resources Information Center

KOVNER, EDGAR A.

PROBLEMS CONFRONTED BY PLANNERS OF NUCLEAR PROGRAMS AT THE TECHNICIAN LEVEL INCLUDE (1) LACK OF PRECEDENT IN CURRICULUM, COURSE OUTLINES, AND GRADUATE PLACEMENT, (2) DIFFICULTY IN DETERMINING COSTS OF LABORATORY CONSTRUCTION, EQUIPMENT, AND OPERATION, AND (3) REQUIREMENT OF ATOMIC ENERGY COMMISSION LICENSES IN NUCLEAR OCCUPATIONS. A 92-SEMESTER…

National Apprenticeship and Training Standards for Dental Technicians. Revised.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

These national standards contain information for establishing and operating effective apprenticeship programs for dental technicians. Included in the volume are the following: definitions; provisions of the standards (equal opportunity in apprenticeship; terms of apprenticeship; apprenticeship agreements; ratios of apprentices to dental…

Impact of a pharmacy technician-centered medication reconciliation program on medication discrepancies and implementation of recommendations.

PubMed

Kraus, Sarah K; Sen, Sanchita; Murphy, Michelle; Pontiggia, Laura

2017-01-01

To evaluate the impact of a pharmacy-technician centered medication reconciliation (PTMR) program by identifying and quantifying medication discrepancies and outcomes of pharmacist medication reconciliation recommendations. A retrospective chart review was performed on two-hundred patients admitted to the internal medicine teaching services at Cooper University Hospital in Camden, NJ. Patients were selected using a stratified systematic sample approach and were included if they received a pharmacy technician medication history and a pharmacist medication reconciliation at any point during their hospital admission. Pharmacist identified medication discrepancies were analyzed using descriptive statistics, bivariate analyses. Potential risk factors were identified using multivariate analyses, such as logistic regression and CART. The priority level of significance was set at 0.05. Three-hundred and sixty-five medication discrepancies were identified out of the 200 included patients. The four most common discrepancies were omission (64.7%), non-formulary omission (16.2%), dose discrepancy (10.1%), and frequency discrepancy (4.1%). Twenty-two percent of pharmacist recommendations were implemented by the prescriber within 72 hours. A PTMR program with dedicated pharmacy technicians and pharmacists identifies many medication discrepancies at admission and provides opportunities for pharmacist reconciliation recommendations.

Impact of a pharmacy technician-centered medication reconciliation program on medication discrepancies and implementation of recommendations

PubMed Central

2016-01-01

Objectives: To evaluate the impact of a pharmacy-technician centered medication reconciliation (PTMR) program by identifying and quantifying medication discrepancies and outcomes of pharmacist medication reconciliation recommendations. Methods: A retrospective chart review was performed on two-hundred patients admitted to the internal medicine teaching services at Cooper University Hospital in Camden, NJ. Patients were selected using a stratified systematic sample approach and were included if they received a pharmacy technician medication history and a pharmacist medication reconciliation at any point during their hospital admission. Pharmacist identified medication discrepancies were analyzed using descriptive statistics, bivariate analyses. Potential risk factors were identified using multivariate analyses, such as logistic regression and CART. The priority level of significance was set at 0.05. Results: Three-hundred and sixty-five medication discrepancies were identified out of the 200 included patients. The four most common discrepancies were omission (64.7%), non-formulary omission (16.2%), dose discrepancy (10.1%), and frequency discrepancy (4.1%). Twenty-two percent of pharmacist recommendations were implemented by the prescriber within 72 hours. Conclusion: A PTMR program with dedicated pharmacy technicians and pharmacists identifies many medication discrepancies at admission and provides opportunities for pharmacist reconciliation recommendations. PMID:28690691

General Electronics Technician: Basic Electronics.

ERIC Educational Resources Information Center

Hilley, Robert

These instructional materials include a teacher's guide designed to assist instructors in organizing and presenting an introductory course in general electronics and a student guide. The materials are based on the curriculum-alignment concept of first stating the objectives, developing instructional strategies for teaching those objectives, and…

Robotics/Automated Systems Technicians.

ERIC Educational Resources Information Center

Doty, Charles R.

Major resources exist that can be used to develop or upgrade programs in community colleges and technical institutes that educate robotics/automated systems technicians. The first category of resources is Economic, Social, and Education Issues. The Office of Technology Assessment (OTA) report, "Automation and the Workplace," presents analyses of…

Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies.

PubMed

Grootendorst, Paul; Shim, Minsup; Tieu, Jimmy

2018-01-01

Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide "expanded scope" activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists' provision of such services. We address these questions using data for Ontario community pharmacies. Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks.

Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies

PubMed Central

Grootendorst, Paul; Shim, Minsup

2018-01-01

Background: Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide “expanded scope” activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists’ provision of such services. We address these questions using data for Ontario community pharmacies. Methods: Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Results: Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Conclusions: Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks. PMID:29796133

Saturn Apollo Program

NASA Image and Video Library

1965-01-01

Fairchild technicians check out the extended Pegasus meteoroid detection surface. The Pegasus was developed by Fairchild Stratos Corporation, Hagerstown, Maryland, for NASA through the Marshall Space Flight Center. Three Pegasus satellites were flown aboard Saturn I SA-8, SA-9, and SA-10 missions. After being placed into orbit around the Earth, the satellite unfolded a series of giant panels to form a pair of wings measuring 96 feet across. The purpose of the satellite was to electronically record the size and frequency of particles in space, and compare the performance of protected and unprotected solar cells as important new preliminaries to a marned flight to the Moon.

An Assessment of the State of the Art of Curriculum Materials and a Status Assessment of Training Programs for Robotics/Automated Systems Technicians. Task Analysis and Descriptions of Required Job Competencies of Robotics/Automated Systems Technicians.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lovett, James E.

This report presents the results of research conducted to determine the current state of the art of robotics/automated systems technician (RAST) training offered in the United States. Section I discusses the RAST curriculum project, of which this state-of-the-art review is a part, and offers a RAST job description. Section II describes the…

Medical Laboratory Technician and Technologist Training: Arizona Heeds the Call.

ERIC Educational Resources Information Center

Biehl, Ruth B.

Arizona's medical laboratory personnel training programs were examined in relation to the nationwide development and distribution of laboratory personnel classifications (Medical Technologist--MT, Medical Laboratory Technician--MLT, and Certified Laboratory Assistant--CLA) and the national educational response which has resulted in an increase in…

Feasibility Study of Training Environmental Technicians. Final Report.

ERIC Educational Resources Information Center

Vernon, James Y.; Garrett, Donald M.

A feasibility study and task analysis was performed to determine the future job potential within the Southern California area for environmental technicians trained under a proposed vocational training program in community colleges. Questionnaires were mailed to possible employers in government and industry to obtain information about their…

Nuclear Medicine Technology: A Suggested Postsecondary Curriculum.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

The purpose of this curriculum guide is to assist administrators and instructors in establishing nuclear medicine technician programs that will meet the accreditation standards of the American Medical Association (AMA) Council on Medical Education. The guide has been developed to prepare nuclear medicine technicians (NMT's) in two-year…

EDUCATION FOR HEALTH TECHNICIANS--AN OVERVIEW.

ERIC Educational Resources Information Center

KINSINGER, ROBERT E.

AS DEFINED, HEALTH SERVICE TECHNICIANS ARE NORMALLY PREPARED FOR ENTRY INTO THEIR OCCUPATIONS BY PURSUING A POST-SECONDARY EDUCATIONAL PROGRAM THAT DOES NOT DEMAND A BACCALAUREATE DEGREE BUT USUALLY INCLUDES A COMBINATION OF THEORY, PRACTICAL KNOWLEDGE, MANUAL SKILL, AND WHEN APPROPRIATE, ACTUAL CLINICAL PRACTICE. EXAMPLES OF SUCH TECHNICIANS…

National Apprenticeship and Training Standards for Dental Technicians. Revised.

ERIC Educational Resources Information Center

National Association of Dental Labs., Inc., Washington, DC.

The guidebook presents a systematic and uniform method for training dental technicians throughout the industry, incorporating basic standards recommended by the Bureau of Apprenticeship and Training. The first section defines terminology and establishes rules and regulations regarding apprentices and apprenticeship programs in 16 areas, including…

The Extent of Restrictions on the Service of Active-Component Military Women

DTIC Science & Technology

2012-01-01

from www.rand.org as a public service of the RAND Corporation. CHILDREN AND FAMILIES EDUCATION AND THE ARTS ENERGY AND ENVIRONMENT HEALTH AND...EN engineman, GM gunner’s mate, IT information systems, ET electronics technician, FC fire control, LS logistics spe- cialist, and CS culinary ...sonar technician rating. Women in non–submarine- specific ratings, such as YN yeoman, CS culinary specialist, and LS logistics specialist, are

Integrating electron microscopy into nanoscience and materials engineering programs

NASA Astrophysics Data System (ADS)

Cormia, Robert D.; Oye, Michael M.; Nguyen, Anh; Skiver, David; Shi, Meng; Torres, Yessica

2014-10-01

Preparing an effective workforce in high technology is the goal of both academic and industry training, and has been the engine that drives innovation and product development in the United States for over a century. During the last 50 years, technician training has comprised a combination of two-year academic programs, internships and apprentice training, and extensive On-the-Job Training (OJT). Recently, and especially in Silicon Valley, technicians have four-year college degrees, as well as relevant hands-on training. Characterization in general, and microscopy in particular, is an essential tool in process development, manufacturing and QA/QC, and failure analysis. Training for a broad range of skills and practice is challenging, especially for community colleges. Workforce studies (SRI/Boeing) suggest that even four year colleges often do not provide the relevant training and experience in laboratory skills, especially design of experiments and analysis of data. Companies in high-tech further report difficulty in finding skilled labor, especially with industry specific experience. Foothill College, in partnership with UCSC, SJSU, and NASA-Ames, has developed a microscopy training program embedded in a research laboratory, itself a partnership between university and government, providing hands-on experience in advanced instrumentation, experimental design and problem solving, with real-world context from small business innovators, in an environment called `the collaboratory'. The program builds on AFM-SEM training at Foothill, and provides affordable training in FE-SEM and TEM through a cost recovery model. In addition to instrument and engineering training, the collaboratory also supports academic and personal growth through a multiplayer social network of students, faculty, researchers, and innovators.

Training Program for Emergency Medical Technician: Dispatcher. 2--Instructor Lesson Plans.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Intended to assist instructors who wish to conduct a training course for emergency medical technicians (EMTs) serving as dispatchers, this document contains detailed lesson plans organized to structure course presentations. Each lesson plan includes the following elements: unit objectives; suggestions for adapting the lessons to local policies and…

Quality Control Technician Curriculum. An Elusive Butterfly.

ERIC Educational Resources Information Center

Holler, Michael

Defining and developing a quality control technician curriculum for an associate degree program is a difficult and puzzling job. There are as many definitions of quality control and curriculum ideas as there are educators asked. However, one could start by dividing the field into its major areas--heavy manufacturing, maintenance, research, and…

National Employment Outlook for Medical Record Technicians.

ERIC Educational Resources Information Center

Passmore, David Lynn; And Others

1983-01-01

Contains estimates of future employment levels and annual job openings through 1985 for medical record technicians (MRTs). This information is compared to enrollment and completion date for MRT training programs certified by the American Medical Association to determine the adequacy of the current supply of MRTs in light of future MRT…

49 CFR 40.211 - Who conducts DOT alcohol tests?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Who conducts DOT alcohol tests? 40.211 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Alcohol Testing Personnel § 40.211 Who conducts DOT alcohol tests? (a) Screening test technicians (STTs) and breath alcohol technicians (BATs) meeting their respective...

49 CFR 40.211 - Who conducts DOT alcohol tests?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Who conducts DOT alcohol tests? 40.211 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Alcohol Testing Personnel § 40.211 Who conducts DOT alcohol tests? (a) Screening test technicians (STTs) and breath alcohol technicians (BATs) meeting their respective...

Unified Technical Concepts. Physics for Technicians.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary programs. This UTC classroom textbook, consisting of 14 chapters, deals with physics for technicians. Addressed in the individual chapters of the guide are the following topics: force, work, rate, momentum, resistance, power, potential and…

Soils and Foundations: A Syllabus.

ERIC Educational Resources Information Center

Long, Melvin J.

The teaching guide and course outline for a 12-week course in soils and foundations is designed to help student technicians in a two-year associate degree civil engineering technology program to obtain entry level employment as highway engineering aides, soil testing technicians, soil mappers, or construction inspectors. The seven teaching units…

Identification of Occupational Competencies in Services for the Electromechanical Cluster Occupations.

ERIC Educational Resources Information Center

Stone, Robert D.

The research study was undertaken to provide data on skills and competencies to aid persons developing curricula for electromechanical technician training programs. Through a 73.8 percent return of 212 questionnaires distributed to Iowa electromechanical technicians, five occupational areas were identified as representative: residential appliance…

Unified Technical Concepts. Math for Technicians.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC classroom textbook, consisting of 10 chapters, deals with mathematical concepts as they apply to the study of physics. Addressed in the individual chapters of the text are the following topics: angles and…

Communications Electronics.

ERIC Educational Resources Information Center

Vorderstrasse, Ron; Siebert, Leo

This module is the third in a series of electronics publications and serves as a supplement to "General Electronics Technician." It is designed to provide students with an overview of the broad field of communications. Included are those tasks above the basic skills level that allow students to progress to a higher level of competency in the…

Primary care provider and imaging technician satisfaction with a teledermatology project in rural Veterans Health Administration clinics.

PubMed

McFarland, Lynne V; Raugi, Gregory J; Reiber, Gayle E

2013-11-01

Assessment of a multisite rural teledermatology project between 2009 and 2012 in four Pacific Northwest states that trained primary care providers and imaging technicians in state-of-the-art techniques of telemedicine. In 2012, we assessed provider and imaging technician acceptability and satisfaction with a 32-item survey instrument based on the Patient Satisfaction Questionnaire developed by Ware et al. (Eval Program Plann 1983;6:247-63) and modified for telemedicine by Kraai et al. (J Card Fail 2011;17:684-690). Survey questions covered eight satisfaction domains: interpersonal manner, technical quality, accessibility, finances, efficacy, continuity, physical environment, and availability. Overall, 71% of the primary care providers and 94% of the imaging technicians reported being satisfied or extremely satisfied with the teledermatology project. Most (95%) providers found the continuing education classes on dermatology diagnosis and treatment topics useful, and 86% reported teledermatology was a good addition to regular patient services. Most (97%) of the imaging technicians were satisfied with the ability of teledermatology to improve the description of dermatology conditions using images of the lesions or rashes, and 91% were satisfied with the convenience of teledermatology. Challenges reported by both providers and imaging technicians include an increase in workload due to more patient visits related to dermatology care and limited information technology support. Given the Veterans Health Administration's initiatives to promote accessible health care to underserved Veterans using telehealth, these findings can inform future program designs for teledermatology.

An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

ERIC Educational Resources Information Center

Chang, Liang-Te; And Others

A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

Paint shop technicians carefully apply masking prior to painting the Orion full-scale abort flight test crew module in the Edwards Air Force Base paint hangar.

NASA Image and Video Library

2008-03-29

A full-scale flight-test mockup of the Constellation program's Orion crew vehicle arrived at NASA's Dryden Flight Research Center in late March 2008 to undergo preparations for the first short-range flight test of the spacecraft's astronaut escape system later that year. Engineers and technicians at NASA's Langley Research Center fabricated the structure, which precisely represents the size, outer shape and mass characteristics of the Orion space capsule. The Orion crew module mockup was ferried to NASA Dryden on an Air Force C-17. After painting in the Edwards Air Force Base paint hangar, the conical capsule was taken to Dryden for installation of flight computers, instrumentation and other electronics prior to being sent to the U.S. Army's White Sands Missile Range in New Mexico for integration with the escape system and the first abort flight test in late 2008. The tests were designed to ensure a safe, reliable method of escape for astronauts in case of an emergency.

NASA paint shop technicians prepare the Orion full-scale flight test crew module for painting in the Edwards Air Force Base paint hangar.

NASA Image and Video Library

2008-03-29

A full-scale flight-test mockup of the Constellation program's Orion crew vehicle arrived at NASA's Dryden Flight Research Center in late March 2008 to undergo preparations for the first short-range flight test of the spacecraft's astronaut escape system later that year. Engineers and technicians at NASA's Langley Research Center fabricated the structure, which precisely represents the size, outer shape and mass characteristics of the Orion space capsule. The Orion crew module mockup was ferried to NASA Dryden on an Air Force C-17. After painting in the Edwards Air Force Base paint hangar, the conical capsule was taken to Dryden for installation of flight computers, instrumentation and other electronics prior to being sent to the U.S. Army's White Sands Missile Range in New Mexico for integration with the escape system and the first abort flight test in late 2008. The tests were designed to ensure a safe, reliable method of escape for astronauts in case of an emergency.

Use of a pharmacy technician to facilitate postfracture care provided by clinical pharmacy specialists.

PubMed

Irwin, Adriane N; Heilmann, Rachel M F; Gerrity, Theresa M; Kroner, Beverly A; Olson, Kari L

2014-12-01

The ability of a pharmacy technician to support the patient screening and documentation-related functions of a pharmacist-driven osteoporosis management service was evaluated. A two-phase prospective study was conducted within a large integrated health system to assess a pharmacy technician's performance in supporting a multisite team of clinical pharmacy specialists providing postfracture care. In phase I of the study, a specially trained pharmacy technician provided support to pharmacists at five participating medical offices, helping to identify patients requiring pharmacist intervention and, when applicable, collecting patient-specific clinical information from the electronic health record. In phase II of the study, the amount of pharmacist time saved through the use of technician support versus usual care was evaluated. The records of 127 patient cases were reviewed by the pharmacy technician during phase I of the study, and a pharmacist agreed with the technician's determination of the need for intervention in the majority of instances (92.9%). An additional 91 patient cases were reviewed by the technician in phase II of the research. With technician support, pharmacists spent less time reviewing cases subsequently determined as not requiring intervention (mean ± S.D., 5.0 ± 3.8 minutes per case compared with 5.2 ± 4.5 minutes under the usual care model; p = 0.78). In cases requiring intervention, technician support was associated with a reduction in the average pharmacist time spent on care plan development (13.5 ± 7.1 minutes versus 18.2 ± 16.6 minutes with usual care, p = 0.34). The study results suggest that a pharmacy technician can accurately determine if a patient is a candidate for pharmacist intervention and collect clinical information to facilitate care plan development. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

KSC-08pd1902

NASA Image and Video Library

2008-07-02

CAPE CANAVERAL, Fla. – A United Space Alliance technician (right) hands off a component of the Orion Crew Module mockup to one of the other technicians inside the mockup. The technicians wear motion capture suits. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup, which was created and built at the New York Institute of Technology by a team led by Prof. Peter Voci, MFA Director at the College of Arts and Sciences. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup. The work is being performed in United Space Alliance's Human Engineering Modeling and Performance Lab in the RLV Hangar at NASA's Kennedy Space Center. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system.

A reliability-based maintenance technicians' workloads optimisation model with stochastic consideration

NASA Astrophysics Data System (ADS)

Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.

2016-06-01

The growing interest in technicians' workloads research is probably associated with the recent surge in competition. This was prompted by unprecedented technological development that triggers changes in customer tastes and preferences for industrial goods. In a quest for business improvement, this worldwide intense competition in industries has stimulated theories and practical frameworks that seek to optimise performance in workplaces. In line with this drive, the present paper proposes an optimisation model which considers technicians' reliability that complements factory information obtained. The information used emerged from technicians' productivity and earned-values using the concept of multi-objective modelling approach. Since technicians are expected to carry out routine and stochastic maintenance work, we consider these workloads as constraints. The influence of training, fatigue and experiential knowledge of technicians on workload management was considered. These workloads were combined with maintenance policy in optimising reliability, productivity and earned-values using the goal programming approach. Practical datasets were utilised in studying the applicability of the proposed model in practice. It was observed that our model was able to generate information that practicing maintenance engineers can apply in making more informed decisions on technicians' management.

Outdoor Power Equipment Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5111.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2011

2011-01-01

The graduate of the Outdoor Power Equipment Technician apprenticeship program is a certified journeyperson who will be able to: (1) supervise, train and coach apprentices; (2) service, maintain, repair and rebuild outdoor power equipment and outdoor power equipment accessories; (3) communicate clearly with customers, staff, suppliers, as required;…

Natural Gas Compression Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5311.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2011

2011-01-01

The graduate of the Natural Gas Compression Technician apprenticeship program is a certified journeyperson who will be able to install, commission, maintain and repair equipment used to gather store and transmit natural gas. Advanced Education and Technology has prepared this course outline in partnership with the Natural Gas Compression…

Multi-Cultural Competency-Based Vocational Curricula. Fiberglass Technician. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on fiberglass technician. This program covers 12 instructional areas: orientation, safety, introduction to fiberglass-reinforced plastics, hand lay-up, introduction to equipment operation, chopper operation, gel-coat equipment, finish and…

Basic Training Course/Emergency Medical Technician (Second Edition). Instructor's Lesson Plan.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This document containing instructor lesson plans is one of three prepared to update a basic training program for emergency medical technicians (EMTs). (A course guide containing planning and management information and a study guide are available separately.) Material covers all emergency medical techniques currently considered to be within the…

Recreation Vehicle Service Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 4507.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2007

2007-01-01

The graduate of the Recreational Vehicle Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) know the standards and regulations that relate to recreation vehicles; (2) install, repair and maintain LP gas distribution systems and appliances; (3) install, repair and maintain plumbing and electrical…

EMMA: The expert system for munition maintenance

NASA Technical Reports Server (NTRS)

Mullins, Barry E.

1988-01-01

Expert Missile Maintenance Aid (EMMA) is a first attempt to enhance maintenance of the tactical munition at the field and depot level by using artificial intelligence (AI) techniques. The ultimate goal of EMMA is to help a novice maintenance technician isolate and diagnose electronic, electromechanical, and mechanical equipment faults to the board/chassis level more quickly and consistently than the best human expert using the best currently available automatic test equipment (ATE). To this end, EMMA augments existing ATE with an expert system that captures the knowledge of design and maintenance experts. The EMMA program is described, including the evaluation of field-level expert system prototypes, the description of several study tasks performed during EMMA, and future plans for a follow-on program. This paper will briefly address several study tasks performed during EMMA. The paper concludes with a discussion of future plans for a follow-on program and other areas of concern.

Electronics Devices and Materials

DTIC Science & Technology

2008-03-17

Molecular -bea epitaxy MCNPX ............... Software code Misse6 ................. Satellite expected to carry ORMatE-I Misse7...patterning using electron beam lithography), spaces (class 1000 clean benches), and skills (appropriate mix of skilled technicians and professionals...34 Process samples for various projects such as Antimode Base High Electron Mobility Transistors ( HEMT ) and Double Heterojuction Bipolar Transistors

Recovery Act: Training Program Development for Commercial Building Equipment Technicians

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leah Glameyer

The overall goal of this project has been to develop curricula, certification requirements, and accreditation standards for training on energy efficient practices and technologies for commercial building technicians. These training products will advance industry expertise towards net-zero energy commercial building goals and will result in a substantial reduction in energy use. The ultimate objective is to develop a workforce that can bring existing commercial buildings up to their energy performance potential and ensure that new commercial buildings do not fall below their expected optimal level of performance. Commercial building equipment technicians participating in this training program will learn how tomore » best operate commercial buildings to ensure they reach their expected energy performance level. The training is a combination of classroom, online and on-site lessons. The Texas Engineering Extension Service (TEEX) developed curricula using subject matter and adult learning experts to ensure the training meets certification requirements and accreditation standards for training these technicians. The training targets a specific climate zone to meets the needs, specialized expertise, and perspectives of the commercial building equipment technicians in that zone. The combination of efficient operations and advanced design will improve the internal built environment of a commercial building by increasing comfort and safety, while reducing energy use and environmental impact. Properly trained technicians will ensure equipment operates at design specifications. A second impact is a more highly trained workforce that is better equipped to obtain employment. Organizations that contributed to the development of the training program include TEEX and the Texas Engineering Experiment Station (TEES) (both members of The Texas A&M University System). TEES is also a member of the Building Commissioning Association. This report includes a description of the project accomplishments, including the course development phases, tasks associated with each phase, and detailed list of the course materials developed. A summary of each year's activities is also included.« less

Job dynamics of veterinary professionals in an academic research institution. I. Retention and turnover of veterinary technicians.

PubMed

Huerkamp, Michael J

2006-09-01

The turnover of veterinary technicians within an animal resources program averaged 33% annually over 18 y, peaking at 67% in 1998 to 1999. Insufficient retention of veterinary technicians led to diversion of veterinarian effort to technical tasks and to increased allocation of administrative resources for supervising and managing an expanding team of veterinary technicians. To identify factors and trends related to poor retention, address any causes, and reduce turnover, a retrospective analysis of employment records was done. The retention of veterinary technicians was significantly greater for the 9 technicians hired from veterinary private practice rather than for any of 3 other general sources: promotions from the animal care staff, transfers from other research institutions, and miscellaneous sources. Veterinary technician turnover was reduced from a mean of 60% over 1995 to 1999 to an average of 26% during 2000 to 2004. Higher retention was associated with management practices that included renewed concentration on recruiting and interviewing strategies and emphasis on training and career development including merit raises for technician certification through the American Association for Laboratory Animal Science. Higher retention yielded correspondingly greater experience on the job as the mean tenure increased from 1.1 y in 2000 to 2.8 y in 2004. The most valued attributes related to employment by veterinary technicians as determined by survey were to do meaningful work, earn a good living, and have a committed team of coworkers.

How do laboratory technicians perceive their role in the tuberculosis diagnostic process? A cross-sectional study among laboratory technicians in health centers of Central Java Province, Indonesia.

PubMed

Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba

2016-01-01

Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%-75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Most of the laboratory technicians believed that they have an important role in TB patients' treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program.

Electronic test and calibration circuits, a compilation

NASA Technical Reports Server (NTRS)

1972-01-01

A wide variety of simple test calibration circuits are compiled for the engineer and laboratory technician. The majority of circuits were found inexpensive to assemble. Testing electronic devices and components, instrument and system test, calibration and reference circuits, and simple test procedures are presented.

Field Heat Treatment Technician: Competency Profile. Apprenticeship and Industry Training. 20908.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2008

2008-01-01

The graduate of the Field Heat Treatment Technician apprenticeship program is a certified journeyperson who will be able: (1) use heat treatment equipment to apply heat to materials in order to change a material's properties; (2) Use their knowledge of the properties of heat, industry codes and specifications to determine how heat treatment will…

Agricultural Equipment Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 3212

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2012

2012-01-01

The graduate of the Agricultural Equipment Technician apprenticeship program is a certified journeyperson who will be able to: (1) repair, diagnose and maintain by skill and knowledge gained through training and experience any of the working parts of diesel engines as well as the various components of mobile farm machinery; (2) use, competently,…

Rig Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5211.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2011

2011-01-01

The graduate of the Rig Technician apprenticeship program is a certified journeyperson who will be able to: (1) take responsibility for personal safety and the safety of others; (2) supervise, coach and train apprentices and floor hands; (3) perform the duties of a motorhand, derrickhand or driller; and (4) perform assigned tasks in accordance…

Automotive Service Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0912

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2012

2012-01-01

The graduate of the Automotive Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) repair, maintain and overhaul or modify a motor vehicle; (2) comprehend work orders, technical bulletins and estimates, and relate the information to the job at hand; (3) interpret warranty policy in terms of service…

Heavy Equipment Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 1912

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2012

2012-01-01

The graduate of the Heavy Equipment Technician apprenticeship program is a certified journeyperson who will be able to: (1) diagnose repair, and maintain by skills and knowledge gained through training and experience any of the working parts of diesel engines as well as the various components of mobile industrial equipment; (2) use, competently,…

An Instructional Program for Training Nondestructive Testing and Inspection Technicians.

ERIC Educational Resources Information Center

Stokes, Vernon L.

This document, the second portion of a two-part study, is designed to provide a guide for the formal training of technicians for nondestructive testing and inspection. Information in the guide is based on results of the industrial survey discussed in Part I. The subject matter is intended to be both flexible and comprehensive, and instructional…

Transport Refrigeration Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 4112

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2012

2012-01-01

The graduate of the Transport Refrigeration Technician apprenticeship program is a certified journeyperson who will be able: (1) to diagnose repair, maintain and operate transport refrigeration equipment used to heat or cool the load as well as of diesel engines, APUs and other prime movers; (2) to use tools and equipment in order to carry out…

Marine Science Technician Second Class, 15-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, was designed to provide the theory portion of the Marine Science Technician Program. It includes a review of basic subjects, marine biology, oceanography, as well as meteorologic observations and recording. The course consists of a lesson book…

Powerline Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2104.4

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2004

2004-01-01

The graduate of the Powerline Technician apprenticeship program is a certified journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) use and maintain hand and power tools to the standards of competency and safety required in the trade; (4) construct,…

SURVEY OF LIBRARY PERSONNEL IN SIERRA COLLEGE EMPLOYMENT AREA.

ERIC Educational Resources Information Center

YOUNG, ELMA L.

FOR TWO YEARS PRIOR TO THIS STUDY, SIERRA COLLEGE, CALIFORNIA, HAD OFFERED LIBRARY TECHNICIAN TRAINING IN ITS EVENING PROGRAM. A SURVEY OF LIBRARIES IN THE 5-COUNTY EMPLOYMENT AREA OF THE COLLEGE'S GRADUATES WAS MADE IN 1968 TO DETERMINE NEEDS FOR LIBRARY TECHNICIANS. IN THE FIVE COUNTIES, 167 LIBRARIES WERE IDENTIFIED, WITH A TOTAL OF 1084…

Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

Treesearch

Alphus D. Wilson

2012-01-01

Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

Test Administrator's Handbook and Student Instructions for Job-Task Performance Tests for Doppler Radar, AN/APN-147 and its Computer AN/ASN-35, and Associated Test Equipment and Hand Tools. Report for June-December 1972.

ERIC Educational Resources Information Center

Matrix Research Co., Alexandria, VA.

The handbook covers a comprehensive series of Job-Task Performance Tests for the Doppler Radar (AN/APN) and its Associated Computer (AN/ASN-35). The test series has been developed to measure job performance of the electronic technician. These tests encompass all phases of day-to-day preventative and corrective maintenance that technicians are…

How do laboratory technicians perceive their role in the tuberculosis diagnostic process? A cross-sectional study among laboratory technicians in health centers of Central Java Province, Indonesia

PubMed Central

Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba

2016-01-01

Purpose Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. Methods This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Results Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%–75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Conclusion Most of the laboratory technicians believed that they have an important role in TB patients’ treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program. PMID:27660502

Basic Electronics.

ERIC Educational Resources Information Center

Hartman, Lonnie; Huston, Jane, Ed.

The skills taught in these materials for a seven-unit course were those identified as necessary not only for entry-level electronic technicians but for those in other occupations as well, including appliance repair, heating and air conditioning, and auto mechanics. The seven units are on shop orientation and safety principles, introduction to…

General Electronics Technician: Semiconductor Devices and Circuits.

ERIC Educational Resources Information Center

Hilley, Robert

These instructional materials include a teacher's guide designed to assist instructors in organizing and presenting an introductory course in general electronics focusing on semiconductor devices and circuits and a student guide. The materials are based on the curriculum-alignment concept of first stating the objectives, developing instructional…

Electric Motor Systems Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 3006.2

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2006

2006-01-01

The graduate of the Electric Motor Systems Technician apprenticeship program is a certified journeyperson who will be able to: (1) understand the principles of sound and safe trade practices; (2) interpret drawings, plans, and be able to layout and develop projects according to specifications; (3) use the tools of the trade in a safe and proper…

Appliance Service Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2307.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2007

2007-01-01

The graduate of the Appliance Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) use and maintain hand and power tools to the standards of competency and safety required in the trade; (4) by skill…

Prairie View A&M/Baylor College of Medicine SMART Summer Undergraduate Prostate Cancer Research Project

DTIC Science & Technology

2009-04-01

August, 2007 and is working as a technician while he prepares to take the MCAT and GRE exams and apply for MD/Ph.D. and DO/Ph.D. programs. 2007...degree and is working as a technician while he improves his MCAT score and applies to medical school. Mark was selected for significant PVAMU leadership

DETERMINATION OF THE EDUCATIONAL NEEDS OF AGRICULTURAL ENGINEERING TECHNICIANS IN OHIO, A DIGEST OF A PH.D. DISSERTATION. RESEARCH SERIES IN AGRICULTURAL EDUCATION.

ERIC Educational Resources Information Center

BENDER, RALPH E.; HALTERMAN, JERRY J.

THIS STUDY WAS DESIGNED TO DEVELOP CURRICULUMS NEEDED IN TRAINING PROGRAMS FOR AGRICULTURAL ENGINEERING TECHNICIANS IN OHIO. A QUESTIONNAIRE TO INVENTORY THE LABOR FORCE WAS ADMINISTERED TO INDIVIDUALS, FIRMS, BUSINESSES, AND AGENCIES EMPLOYING PERSONS IN AREAS REQUIRING AGRICULTURAL ENGINEERING AND FARM MECHANICS. ANOTHER TO COLLECT INFORMATION…

2010 Mississippi Curriculum Framework: Postsecondary Emergency Medical Technician. (Program CIP: 51.0904 - Emergency Medical Technology/Technician)

ERIC Educational Resources Information Center

Briscoe, Lisa; Bryant, Katrina; Galtelli, Mark; Glasson, Kristi; Hall, David; Hood, Brenda; Mahaffey, Libby; McBryde, John; Read, John; Shirley, Gary; Wright, Al

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Missile Systems Maintenance, AFSC 411XOB/C.

DTIC Science & Technology

1988-04-01

technician’s rating. A statistical measurement of their agreement, known as the interrater reliability (as assessed through components of variance of...senior technician’s ratings. A statistical measurement of their agreement, known as the interrater reliability (as assessed through components of...FABRICATION TRANSITORS *INPUT/OUTPUT (PERIPHERAL) DEVICES SOLID-STATE SPECIAL PURPOSE DEVICES COMPUTER MICRO PROCESSORS AND PROGRAMS POWER SUPPLIES

Preparing technicians for engineering materials technology

NASA Technical Reports Server (NTRS)

Jacobs, James A.; Metzloff, Carlton H.

1990-01-01

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Advancing the role of the pharmacy technician: A systematic review.

PubMed

Mattingly, Ashlee N; Mattingly, T Joseph

To summarize the findings of a literature search on advancing the role of pharmacy technicians, including the types of training identified and the potential costs and benefits to both the technician and the pharmacy. A literature search of Scopus, Embase, and Medline was conducted on January 11, 2017. Original research, research reports, case studies, or association reports were included for review. Articles were considered to be relevant based on identification of an advanced pharmacy technician role or addressing additional training/education for technician functions. A standard data extraction form was used to collect study authors, article title, year published, journal title, study design, brief description of methods, primary outcome measures, advanced technician roles identified, additional education or training addressed, and additional costs and benefits identified in each article. A total of 33 articles were included for full review and data extraction. Study design varied, with 17 (52%) quantitative, 1 (3%) qualitative, 5 (15%) mixed-method, and 10 (30%) case study designs. Seventeen (52%) of the studies included were published after 2006. The mechanism of training was primarily through supervised on-the-job training, allowing technicians to assume administrative-based positions that facilitated a pharmacist-led clinical service, with either the pharmacist or the pharmacy receiving the greatest benefits. Although the literature supports technicians performing advanced roles in the pharmacy, resulting in either improved patient outcomes or opportunities for pharmacists to engage in additional clinical services, the benefits to the technician were primarily indirect, such as an increase in job satisfaction or a more desirable work schedule. If a technician is to take on additional roles that require completion of a formalized training or educational program, benefits that are more tangible may help to inspire technicians to pursue these roles. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Electronics Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

Electronic Devices and Systems. Energy Technology Series.

ERIC Educational Resources Information Center

Technical Education Research Centre-Southwest, Waco, TX.

This course in electronic devices and systems is one of 16 courses in the Energy Technology Series developed for an Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in…

KENNEDY SPACE CENTER, FLA. -- From left, NASA Deputy Program Manager of the Space Shuttle Program Michael Wetmore, United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro, NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik, and a USA technician examine cold plates in Orbiter Processing Facility Bay 2. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- From left, NASA Deputy Program Manager of the Space Shuttle Program Michael Wetmore, United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro, NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik, and a USA technician examine cold plates in Orbiter Processing Facility Bay 2. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

Marine Propulsion Technology Program Meets the Demand

ERIC Educational Resources Information Center

Fowler, Howard G.

1974-01-01

The marine technology program cluster at Florida Keys Community College is described. Technicians are trained to maintain and repair engines and selected marine accessories through a marine propulsion technology curriculum (certificate program and associate in science degree). (EA)

Simulation For Task Practice in Technical Training.

ERIC Educational Resources Information Center

Mallory, W. J.

1981-01-01

Describes two programs used by the Ford Motor Company to train manufacturing skilled trades personnel. Programmable Controller Maintenance Training Program for Industrial Technicians and Troubleshooting Strategy Program use simulation and provide improved task performance after training. (JOW)

Appliance Servicing Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the standard appliance servicing technician curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard…

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (top) discusses the inner workings of Shuttle Atlantis in Orbiter Processing Facility Bay 1 with a United Space Alliance (USA) technician (bottom). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (top) discusses the inner workings of Shuttle Atlantis in Orbiter Processing Facility Bay 1 with a United Space Alliance (USA) technician (bottom). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right) discusses a speed brake on Shuttle Discovery in Orbiter Processing Facility Bay 3 with a United Space Alliance (USA) technician (left). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right) discusses a speed brake on Shuttle Discovery in Orbiter Processing Facility Bay 3 with a United Space Alliance (USA) technician (left). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

Electromechanical Technology. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in electromechanical technology in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of electromechanical technicians; program content (curriculum framework and student…

Community College Pathways to the STEM Workforce: What Are They, Who Follows Them, and How?

ERIC Educational Resources Information Center

Van Noy, Michelle; Zeidenberg, Matthew

2017-01-01

This chapter describes community college STEM programs, including transfer-oriented science and engineering (S&E) programs and workforce-oriented technician programs, and the characteristics and educational pathways of the students who enroll in these programs.

Adults with Autism Spectrum Disorder as Behavior Technicians for Young Children with Autism: Outcomes of a Behavioral Skills Training Program

ERIC Educational Resources Information Center

Lerman, Dorothea C.; Hawkins, Lynn; Hillman, Conrad; Shireman, Molly; Nissen, Melissa A.

2015-01-01

Adults with autism spectrum disorder (ASD), who were interested in working as behavior technicians for young children with autism, participated in 2 experiments. Participants included 5 adults with Asperger syndrome or pervasive developmental disorder not otherwise specified, 19 to 23 years old, and 11 children with autism, 3 to 7 years old. In…

An Analysis of the Future Need for Certified Animal Health Technicians and Instructional Program Content.

ERIC Educational Resources Information Center

Nevada State Council on Occupational Education, Carson City.

A study examined the future need for certified animal health technicians (CAHT) in Nevada and the skills/knowledge that future CAHTs will need. Questionnaires were mailed to all of Nevada's 306 licensed veterinarians; 100 (32.68%) responded. The estimated numbers of CAHTs needed by the state's veterinarians in 1, 3, and 5 years were 62, 142, and…

A Development Curriculum Plan To Achieve a Sequenced Curriculum between High School Courses in Automotive Mechanics and the Mattatuck Community College Automotive Technician Program. Final Report.

ERIC Educational Resources Information Center

Mattatuck Community Coll., Waterbury, CT.

This document contains a developmental curriculum plan for an articulated curriculum in automotive mechanics for Connecticut's Mattatuck Community College and area high schools. The curriculum guide includes a course description, criteria for evaluation, attendance policy, objectives, a curriculum outline, a three-part automotive technician test,…

[Nursing staff absenteeism rates as a personnel management indicator].

PubMed

Sancinetti, Tânia Regina; Soares, Alda Valéria Neves; Lima, Antonio Fernandes Costa; Santos, Nanci Cristiano; Melleiro, Marta Maria; Fugulin, Fernanda Maria Togeiro; Gaidzinski, Raquel Rapone

2011-08-01

Absenteeism in nursing is a difficult problem for health organizations; hence it is an indicator that must be monitored. The objective of this study was to analyze the absenteeism rate of nursing professionals in a public hospital. Absenteeism data were collected monthly, from January to July 2008, and calculated by means of an electronic program. The mean absenteeism index for nurses varied from 5.6% to 9.7% for technicians/nursing aides. Sick leaves were the most prevalent reason for absences. The data revealed the major cause of absenteeism and pointed at the need to change policies for hiring nursing professionals, in addition to reviewing the working processes in order to improve the workers' health conditions.

Clinical laboratory technician to clinical laboratory scientist articulation and distance learning.

PubMed

Crowley, J R; Laurich, G A; Mobley, R C; Arnette, A H; Shaikh, A H; Martin, S M

1999-01-01

Laboratory workers and educators alike are challenged to support access to education that is current and provides opportunities for career advancement in the work place. The clinical laboratory science (CLS) program at the Medical College of Georgia in Augusta developed a clinical laboratory technician (CLT) to CLS articulation option, expanded it through distance learning, and integrated computer based learning technology into the educational process over a four year period to address technician needs for access to education. Both positive and negative outcomes were realized through these efforts. Twenty-seven students entered the pilot articulation program, graduated, and took a CLS certification examination. Measured in terms of CLS certification, promotions, pay raises, and career advancement, the program described was a success. However, major problems were encountered related to the use of unfamiliar communication technology; administration of the program at distance sites; communication between educational institutions, students, and employers; and competition with CLT programs for internship sites. These problems must be addressed in future efforts to provide a successful distance learning program. Effective methods for meeting educational needs and career ladder expectations of CLTs and their employers are important to the overall quality and appeal of the profession. Educational technology that includes computer-aided instruction, multimedia, and telecommunications can provide powerful tools for education in general and CLT articulation in particular. Careful preparation and vigilant attention to reliable delivery methods as well as students' progress and outcomes is critical for an efficient, economically feasible, and educationally sound program.

Emergency Medical Technician: Basic Refresher Curriculum (Instructor Course Guide )

DOT National Transportation Integrated Search

1997-09-01

The EMT-Basic Refresher curriculum is the minimum acceptable content that must : be included in any EMT-Basic refresher educational program. This program should : consist of a minimum of 24 classroom hours. The refresher training program is : divided...

Lowering Juno Radiation Vault

NASA Image and Video Library

2010-07-12

Technicians lowered a special radiation vault onto the propulsion module of NASA Juno spacecraft. The vault will dramatically slow the aging effect radiation has on the electronics for the duration of the mission.

KSC-08pd1901

NASA Image and Video Library

2008-07-02

CAPE CANAVERAL, Fla. – Professor Peter Voci, NYIT MOCAP (Motion Capture) team director, (left) hands a component of the Orion Crew Module mockup to one of three technicians inside the mockup. The technicians wear motion capture suits. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup. The work is being performed in United Space Alliance's Human Engineering Modeling and Performance Lab in the RLV Hangar at NASA's Kennedy Space Center. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup. The work is being performed in United Space Alliance's Human Engineering Modeling and Performance Lab in the RLV Hangar at NASA's Kennedy Space Center. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system.

Installation of new Generation General Purpose Computer (GPC) compact unit

NASA Technical Reports Server (NTRS)

1991-01-01

In the Kennedy Space Center's (KSC's) Orbiter Processing Facility (OPF) high bay 2, Spacecraft Electronics technician Ed Carter (right), wearing clean suit, prepares for (26864) and installs (26865) the new Generation General Purpose Computer (GPC) compact IBM unit in Atlantis', Orbiter Vehicle (OV) 104's, middeck avionics bay as Orbiter Systems Quality Control technician Doug Snider looks on. Both men work for NASA contractor Lockheed Space Operations Company. All three orbiters are being outfitted with the compact IBM unit, which replaces a two-unit earlier generation computer.

41 CFR 300-3.1 - What do the following terms mean?

Code of Federal Regulations, 2011 CFR

2011-07-01

... aircraft (e.g., as flight directors, crew chiefs, electronics technicians, mechanics). If a crewmember is...., mental retardation, organic brain syndrome, emotional or mental illness and specific learning...

Toward Improved Maintenance Training Programs: The Potentials for Training and Aiding the Technician.

DTIC Science & Technology

1981-07-01

conditional, fault-isolation approach of the con- Data Base Requirements tent expert, photographs of normal and abnormal symp- The content-expert may...59 THE AUTOMATED INTERGRATION OF TRAINING AND AIDING INFORMATION FOR THE OPERATOR/TECHNICIAN Dr. Douglas Towne...Subsystem approach devel- until this Third Biennial Conference oped by the Air Force in the 1960’s for us to call a meeting devoted to integrate Human

Development of Career Opportunities for Technicians in the Nuclear Medicine Field, Phase I. Interim Report Number 1: Survey of Job Characteristics, Manpower Needs and Training Resources, July 1969.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

Phase I of a multiphase research program in progress at the Technical Education Research Center, Inc., was conducted to analyze needs and resources in terms of job performance tasks, career opportunities, and training requirements for nuclear medical technicians. Data were gathered through personal interviews with 203 persons, mostly physicians,…

Get Your Automotive Program Nationally Certified!

ERIC Educational Resources Information Center

Lundquist, Patricia A.

2000-01-01

Automotive programs that nationally certified enhance student recruitment and give students better employment opportunities. Technicians who earn the Automotive Service Excellence credential have joined the ranks of professionals in the automotive service industry. (Author/JOW)

KENNEDY SPACE CENTER, FLA. -- A United Space Alliance (USA) technician (center) discusses aspects of Shuttle processing performed in the Solid Rocket Booster (SRB) Assembly and Refurbishment Facility (ARF) with NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- A United Space Alliance (USA) technician (center) discusses aspects of Shuttle processing performed in the Solid Rocket Booster (SRB) Assembly and Refurbishment Facility (ARF) with NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

Inspecting Juno Radiation Vault

NASA Image and Video Library

2010-07-12

A technician inspects the special radiation vault being installed atop the propulsion module of NASA Juno spacecraft; the vault has titanium walls to protect the spacecraft electronic brain and heart from Jupiter harsh radiation environment.

Development of a Pharmacy Technician-Driven Program to Improve Vaccination Rates at an Academic Medical Center.

PubMed

Hill, John D; Anderegg, Sammuel V; Couldry, Rick J

2017-10-01

Background: Influenza and pneumococcal disease contribute substantially to the burden of preventable disease in the United States. Despite quality measures tied to immunization rates, health systems have struggled to achieve these targets in the inpatient setting. Pharmacy departments have had success through implementation of pharmacist standing order programs (SOP); however, these initiatives are labor-intensive and have not resulted in 100% immunization rates. Objective: The objective of this study was to evaluate a pilot utilizing pharmacy technician interventions, in combination with a nursing SOP, to improve vaccination rates of hospitalized patients for influenza and pneumococcal disease. Methods: A process was developed for pharmacy technicians to identify patients who were not previously screened or immunized during the weekend days on the Cardiovascular Progressive Care unit at the University of Kansas Health-System. Targeted pharmacy technician interventions consisted of phone call reminders and face-to-face discussions with nursing staff. The primary study outcome was the change in immunization compliance rates between the control and intervention groups. Results: Influenza vaccine rates showed a statistically significant increase from 72.2% (52 of 72) of patients during the control group to 92.9% (65 of 70, P = .001) of patients during the intervention group. A pneumococcal vaccination rate of 81.3% (61 of 75) was observed in the control group, compared with 84.3% (59 of 70) of patients in the intervention group ( P = .638). Conclusion: An improvement in inpatient influenza immunization rates can be achieved through targeted follow-up performed by pharmacy technicians, in combination with a nursing-driven SOP.

Alabama Industrial Technician Education Cooperative Demonstration Program (I-TEC). Final Performance Report.

ERIC Educational Resources Information Center

John M. Patterson State Technical Coll., Montgomery, AL.

A cooperative demonstration program between industry (General Electric) and education (John Patterson State Technical College, Alabama) designed and conducted a training program and competency assessment for individuals entering high technology positions related to industrial production in Alabama. The program was designed to develop employees as…

Advanced Certification Program for Computer Graphic Specialists. Final Performance Report.

ERIC Educational Resources Information Center

Parkland Coll., Champaign, IL.

A pioneer program in computer graphics was implemented at Parkland College (Illinois) to meet the demand for specialized technicians to visualize data generated on high performance computers. In summer 1989, 23 students were accepted into the pilot program. Courses included C programming, calculus and analytic geometry, computer graphics, and…

Paramedic Program Accreditation and Individual Performance on the National Paramedic Certification Examination

ERIC Educational Resources Information Center

Rodriguez, Severo A.

2016-01-01

Paramedic program accreditation and individual performance on the national paramedic certification examination were analyzed in this study. In 2008, the National Registry of Emergency Medical Technicians mandated paramedic program accreditation by January 1, 2013. Contemporary literature has not addressed the impact of program accreditation on…

Profile: Southern College of Optometry--A Leader in the Profession.

ERIC Educational Resources Information Center

Spielberger, Debbie

1979-01-01

A profile of the Southern College of Optometry is provided with information covering the history, students, education (including Doctor of Optometry program, technician program, faculty), clinics, buildings, finances, and new programs and services (including the Memphis Health Center, multiple patient VT program, closed circuit color TV,…

KENNEDY SPACE CENTER, FLA. -- From left, a United Space Alliance (USA) technician briefs NASA Deputy Program Manager of the Space Shuttle Program Michael Wetmore, USA Vice President and Space Shuttle Program Manager Howard DeCastro, and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik on the use of cold plates in Orbiter Processing Facility Bay 2. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- From left, a United Space Alliance (USA) technician briefs NASA Deputy Program Manager of the Space Shuttle Program Michael Wetmore, USA Vice President and Space Shuttle Program Manager Howard DeCastro, and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik on the use of cold plates in Orbiter Processing Facility Bay 2. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

Electronics technician Bill Clark assembling a cannon plug with the help of Jim Lewis

NASA Technical Reports Server (NTRS)

1991-01-01

There is always something needed for a NASA aircraft before a research flight can take place. This photo shows William J. Clark working on one of those 'somethings' while Jimmie C. Lewis watches ready to help. Working on a research project is a challenge, for there is no set pattern to follow. From the drawings to the final product there are many people who contribute to that final product -- the flight. The electronic technicians in the Instrumentation Laboratory at NASA Ames-Dryden Flight Research Facility are no exception. Bill Clark is busy creating a cannon plug to be used on the CV-990. He is soldering wires in the appropriate order so the plug will transmit electrical currents correctly when installed in the airplane. Jim stands by to give help and support on the project.

Theoretical and practical considerations for teaching diagnostic electronic-nose technologies to clinical laboratory technicians

Treesearch

Alphus D. Wilson

2012-01-01

The rapid development of new electronic technologies and instruments, utilized to perform many current clinical operations in the biomedical field, is changing the way medical health care is delivered to patients. The majority of test results from laboratory analyses, performed with these analytical instruments often prior to clinical examinations, are frequently used...

THE ROLE OF THE PHYSICAL SCIENCES IN ELECTRICAL-ELECTRONIC TECHNOLOGY. PROGRESS REPORT.

ERIC Educational Resources Information Center

BARLOW, MELVIN L.; SCHILL, WILLIAM J.

TO DETERMINE THE RELATIVE IMPORTANCE OF CHEMISTRY AND PHYSICS FOR INSTRUCTION IN ELECTRICAL AND ELECTRONIC TECHNOLOGY, 51 TECHNICAL WORKERS, 51 JUNIOR COLLEGE INSTRUCTORS, AND 11 EXPERTS RATED 240 SCIENTIFIC PRINCIPLES AS TO THEIR VALUE IN A TECHNICIAN'S WORK. THE THREE GROUPS AGREED ON THE RANK ORDER OF 15 TOPICS--(1) CURRENT ELECTRICITY, (2)…

Three new bachelors of photonics in Ontario

NASA Astrophysics Data System (ADS)

Nantel, Marc; Beda, Johann; Grevatt, Treena; Chebbi, Brahim; Jessop, Paul; Song, Shaowen

2004-10-01

After the introduction in 2001 of community college programs at the Photonics Technician/Technologist levels, the need to cover the photonics educational space at the undergraduate level was addressed. In the last year, three very different new undergraduate degrees in photonics have started to develop in Ontario. These programs are presented in this paper. The Honours B.Sc. in Photonics at Wilfrid Laurier University (Waterloo) will develop a strong understanding of the theory and application of photonics, with practical hands-on exposure to optics, fibre optics, and lasers. This program benefits from the particularity that the department offering it combines both Physics and Computer Science. At McMaster University, the Engineering Physics program will provide students with a broad background in basic Engineering, Mathematics, Electronics, and Semiconductors, as well as an opportunity to pursue Photonics in greater depth and to have that fact recognized in the program designation. The Niagara and Algonquin College Bachelor of Applied Technology in Photonics program is co-op and joint between the two institutions. Emphasis is placed on the applied aspects of the field, with the more hands-on experimental learning taking precedence in the first years and the more advanced theoretical subjects following in the latter years.

Advanced Technological Education Program: 1995 Awards and Activities.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Directorate for Education and Human Resources.

The Advanced Technological Education (ATE) program promotes exemplary improvement in advanced technological education at the national and regional level through support of curriculum development and program improvement at the undergraduate and secondary school levels, especially for technicians being educated for the high performance workplace of…

Programmed Training for Water/Wastewater Operators.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC.

This manual is aimed at the water and wastewater technician who has the responsibility for monitoring the water environment. The televised programmed training stresses the interaction of three components: the program production and operation; group leaders; and operators, including distribution and collection system personnel. The academic…

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) technicians demonstrate the construction of a thermal blanket used in the Shuttle's thermal protection system for USA Vice President and Space Shuttle Program Manager Howard DeCastro (second from left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) technicians demonstrate the construction of a thermal blanket used in the Shuttle's thermal protection system for USA Vice President and Space Shuttle Program Manager Howard DeCastro (second from left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- From left, a United Space Alliance (USA) technician discusses aspects of Shuttle processing performed in the Solid Rocket Booster (SRB) Assembly and Refurbishment Facility (ARF) with USA Vice President and Space Shuttle Program Manager Howard DeCastro and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- From left, a United Space Alliance (USA) technician discusses aspects of Shuttle processing performed in the Solid Rocket Booster (SRB) Assembly and Refurbishment Facility (ARF) with USA Vice President and Space Shuttle Program Manager Howard DeCastro and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (center) are briefed on the use of a cold plate in Orbiter Processing Facility Bay 2 by a USA technician (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (center) are briefed on the use of a cold plate in Orbiter Processing Facility Bay 2 by a USA technician (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility Bay 1, NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (left) and United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (right) are briefed by a USA technician (center) on Shuttle processing in the payload bay of orbiter Atlantis. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility Bay 1, NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (left) and United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (right) are briefed by a USA technician (center) on Shuttle processing in the payload bay of orbiter Atlantis. NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (third from left) watch as a USA technician (right) creates a tile for use in the Shuttle's Thermal Protection System (TPS). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) Vice President and Space Shuttle Program Manager Howard DeCastro (left) and NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (third from left) watch as a USA technician (right) creates a tile for use in the Shuttle's Thermal Protection System (TPS). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (left) discusses some of the working parts inside the nose of Shuttle Discovery in Orbiter Processing Facility Bay 3 with a United Space Alliance (USA) technician (back to camera). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- NASA Deputy Associate Administrator for Space Station and Shuttle Programs Michael Kostelnik (left) discusses some of the working parts inside the nose of Shuttle Discovery in Orbiter Processing Facility Bay 3 with a United Space Alliance (USA) technician (back to camera). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

The Role of Solar Technology Programs In Meeting Our Energy Needs

ERIC Educational Resources Information Center

Valentine, Ivan E.; Larson, Milton E.

1978-01-01

Elements to be included in a solar energy technology training program offered in postsecondary institutions are listed. The article examines various present and future energy sources and describes the solar energy system, stressing the immediate need for training programs for solar energy technicians. (MF)

MentorLinks: Advancing Technological Education. Project Brief. AACC-PB-04-01

ERIC Educational Resources Information Center

Hause, Ellen

2004-01-01

The American Association of Community Colleges with support from the National Science Foundation created the "MentorLinks" Advancing Technological Education program to help community colleges develop or strengthen technician training programs in the science, technology, engineering, and mathematics fields. The program works with…

Introducing Hospital Staff to Computer Concepts: An Educational Program

PubMed Central

Kaplan, Bonnie

1981-01-01

An in-house computer education program for hospital staff ran for two years at a large, metropolitan hospital. The program drew physicians, administrators, department heads, secretaries, technicians, and data managers to courses, seminars, and workshops on medical computing. Two courses, an introduction to computer concepts and a programming course, are described and evaluated.

A Laser Technology Program Does Not Start with the Speed of Light.

ERIC Educational Resources Information Center

Gebert, John H.

1982-01-01

Describes the personnel, equipment, and facilities problems encountered by North Central Technical Institute in the development of a laser technician program, and the program's enrollment and job placement rates. Advocates financial support for such programs to meet the national demand for laser and other high technology personnel. (WL)

Preparing for High Technology: Robotics Programs. Research & Development Series No. 233.

ERIC Educational Resources Information Center

Ashley, William; And Others

This guide is one of three developed to provide guidelines, information, and resources useful in planning and developing postsecondary technician training programs in high technology. It is specifically intended for program planners and developers in the initial stages of planning a new program or specialized option in robotics. (Two companion…

Recommendations for Enabling Manual Component Level Electronic Repair for Future Space Missions

NASA Technical Reports Server (NTRS)

Struk, Peter M.; Easton, John W.; Funk, Gregory P.; Latta, Gary S.; Ganster, Andrew W.; Estes, Brett E.

2011-01-01

Long duration missions to the Moon and Mars pose a number of challenges to mission designers, controllers, and the crews. Among these challenges are planning for corrective maintenance actions which often require a repair. Current repair strategies on the International Space Station (ISS) rely primarily on the use of Orbital Replacement Units (ORUs), where a faulty unit is replaced with a spare, and the faulty unit typically returns to Earth for analysis and possible repair. The strategy of replace to repair has posed challenges even for the ISS program. Repairing faulty hardware at lower levels such as the component level can help maintain system availability in situations where no spares exist and potentially reduce logistic resupply mass.This report provides recommendations to help enable manual replacement of electronics at the component-level for future manned space missions. The recommendations include hardware, tools, containment options, and crew training. The recommendations are based on the work of the Component Level Electronics Assembly Repair (CLEAR) task of the Exploration Technology Development Program from 2006 to 2009. The recommendations are derived based on the experience of two experiments conducted by the CLEAR team aboard the International Space Station as well as a group of experienced Miniature/Microminiature (2M) electronics repair technicians and instructors from the U.S. Navy 2M Project Office. The emphasis of the recommendations is the physical repair. Fault diagnostics and post-repair functional test are discussed in other CLEAR reports.

Jefferson Proving Ground, South of the Fining Line, Final Remedial Investigation/Feasibility Study, Resource Management Plan

DTIC Science & Technology

1993-01-01

and various DOD sites. I From 1984 to 1987, Mr. Pincock was a Certified Radiation and Chemistry Technician for United Nuclear Industries. He performed...in 1983, Mr. Pincock assisted the senior technical staff in radiation protection as a Junior Health Physics Technician at the Nuclear Support Services...SCOPE OF PROGRAM This plan contains a description of the personnel and procedures for managing the Remedial Investigation/Feasibility Study (RI/FS) at

An Experiment in Basic Airborne Electronics Training. Part 5: Evaluation of the Revised Courses.

ERIC Educational Resources Information Center

Baldwin, Robert O.; Johnson, Kirk A.

This is the fifth in a series on shortened versions of the Avionics Fundamentals and Aviation Electronics Technician R (Radar) Courses. The first four studies indicated that the initial revisions of the courses led to substantial savings in training time, but that the graduates from the revised courses were slightly inferior to graduates from the…

AN EXPERIMENT IN BASIC AIRBORNE ELECTRONICS TRAINING, PART IV-- EFFECT OF REDUCTION IN TRAINING TIME ON FLEET PERFORMANCE. FINAL REPORT.

ERIC Educational Resources Information Center

BALDWIN, ROBERT O.; AND OTHERS

THREE PRECEDING REPORTS PRESENTED THE EFFECTS OF SHORTENING TRAINING TIME IN AVIONICS FUNDAMENTALS AND AVIATION ELECTRONICS TECHNICIAN (RADAR) TRAINING UPON THE FINAL COMPREHENSIVE EXAMINATION IN THESE COURSES AND UPON PERFORMANCE IN A SUBSEQUENT EQUIPMENT COURSE. THIS REPORT COMPARES THE ON THE JOB PERFORMANCE OF GRADUATES FROM FOUR GROUPS…

Installing the Future. Fiber Optics Program Readies Students for Lucrative Jobs.

ERIC Educational Resources Information Center

Serrano, Kenneth M.

1995-01-01

A fiber optics program at Somerset County Technical Institute (SCTI) prepares college students and trades workers for telecommunication's new wave of installation. The program was born of a partnership among an electricians' union, AT&T, and SCTI to meet the expected need for fiber optic technicians. (JOW)

Engine & Vehicle Mechanics Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This competency-based curriculum includes all competencies a student will acquire in an engine and vehicle mechanics educational program. It follows guidelines established for automobile technician training programs leading toward certification and addresses requirements of the National Institute for Automotive Service Excellence (ASE). The…

Evaluating the effectiveness of an online medical laboratory technician program.

PubMed

Hansen-Suchy, Kara

2011-01-01

The purpose of this study was to analyze the effectiveness of an online medical laboratory technician program in the academic preparation and development of laboratory professionals. A semi-quantitative comparative research design was used. Several factors were considered in this evaluation. Academic outcomes between online and campus medical laboratory technician (MLT) students was determined by comparing overall and categorical scores on certification exams as well as first time pass rate. Certification exam scores and first time pass rates were also compared to national norms when possible to do so. Demographic data, including age and experience were compared. Additionally, learning styles were assessed to determine if there was a correlation to overall GPA and MLT GPA and if learning styles could be used to predict successful completion of an online Associates of Applied Science. The research was conducted at an academic university located in the mountain west United States. Participants consisted of online and campus students enrolled in a Medical Laboratory Technician program that graduated with their Associate of Applied Science degree between the years 2007-2009. Results of these years were also compared to graduates from 2004-2006 in the same program. Certification performance and first time pass rates were the major outcomes measured. Age and experience were correlated. Online learning styles and GPA were also compared to successful degree completion. The researcher found no significant difference in certification performance with regard to total and categorical scores, and first time pass rates between campus and online MLT students. Online students were slightly older and had more experience working in a laboratory in some capacity. Correlation studies showed significant positive correlation between learning styles, GPA, and successful completion of an Associate of Applied Science degree. When registry scores were compared to the prior cohort of online students, some subcategories scores demonstrated a significant increase using Chi-squared analysis. The research demonstrated that the online MLT students studied were as academically prepared as their campus counterparts.

The astronaut of 1988. [training and selection

NASA Technical Reports Server (NTRS)

Slayton, D. K.

1973-01-01

Past space exploration history is reviewed for a projection of requirements in astronaut training and selection in 1988. The categories of talent required for those space missions are listed as test pilots and operational pilots for the test phase of programs; flight engineers and mechanics for Space Shuttle and Space Stations; medical doctors as experimentators and crew members; medical technicians and nurses for support medical service; veterinarians and veterinary technicians; physisits, chemists and geologists; and military men and administrators. Multinational crews and participation of both sexes are anticipated.

KSC-2011-3307

NASA Image and Video Library

2011-04-27

CAPE CANAVERAL, Fla. -- Technicians work with processing hardware for the Falcon 9 rocket in the Space Exploration Technologies (SpaceX) hangar at Launch Complex 40 at Cape Canaveral Air Force Station in Florida. Technicians are preparing the rocket for the second launch in the Commercial Orbital Transportation Services, or COTS, program to demonstrate private companies' ability to launch uncrewed spacecraft into orbit. A follow-on contract, Commercial Resupply Services, calls for SpaceX to launch 12 resupply missions to the International Space Station between 2011 and 2015. Photo credit: NASA/Jack Pfaller

Information Dissemination: Case Studies on Electronic Dissemination at Four Agencies.

DTIC Science & Technology

1992-07-01

MEDLARS to conduct searches for physicians, nurses , lab technicians, and administrators, often for the same reasons-patient care , preparation of articles...accreditation that apply to health care delivery. Citations are prepared by NLM and the American Hospital Association. This file contains citations covering...AVLINE Audio Visuals On-line BIOETHICSLINE Bioethics On-line Page 5 GAOIIMTEC-92-6FS Electronic Information Dissemination Contents CANCERLIT Cancer

[Microbiology laboratory as a base of information sending].

PubMed

Komori, Toshiaki; Fujita, Naohisa; Hirose, Yuri; Kimura, Takeshi; Kyotani, Noriko; Kurahashi, Satoko; Yamada, Yukiji; Ushiyama, Masaji; Yasumoto, Towa; Yuasa, Soh-ichi

2007-10-01

The goal of our microbiology laboratory is to provide an accurate microbiological result and a useful information for every healthcare workers (HCWs). For this purpose, we were trying to do several activities, such as improving the work-flow of microbiology testings, starting 365-day-open microbiology tests, providing some training courses of microbiology and sending many useful informations about infectious diseases and infection control. Before these activities, we needed another 5 microbiology technicians beside 3 technicians and had started the program to educate them. We have successfully finished it and enabled all plans begin in April, 2005. Since then we are open for 365 days and also sending HCWs many newsletters for performing effective microbiological testings via the intra-network system and having lectures for both doctors and nurses, especially for new resident doctors at the orientation. We had also the training course for certified infection control nurses and accepted two technicians from Africa, who came to study a basic microbiology via JICA. These activities have enabled every technician not only to report and analyze microbiological test result effectively but also to improve writing and presentation skills. Through these activities all technicians have realized that accurate and rapid information from a microbiology laboratory is a key to treat patients with infectious diseases and improve their prognosis. It is suggested that skill-up of technicians lead to report an accurate result in microbiology and at the same time improve the attitude for their job.

Patient- and Technician-Oriented Attitudes Toward Transcranial Magnetic Stimulation Devices.

PubMed

Lonergan, Brady; Nguyen, Eliza; Lembo, Cara; Hinchman, Carrie; Morales, Oscar G; Press, Daniel Z; Pascual-Leone, Alvaro; Stern, Adam P

2018-01-25

Four transcranial magnetic stimulation (TMS) devices are currently approved for use in treatment-resistant depression. The authors present the first data-driven study examining the patient- and technician-experience using three of these distinct devices. A retrospective survey design with both patient and technician arms was utilized. The study population included patients who received TMS for treatment-resistant depression at the Berenson Allen Center for Noninvasive Brain Stimulation for the first time between 2013 and 2016 and technicians who worked in the program from 2009 to 2017. Statistical analysis included t tests and analyses of variance to assess differences between and across the multiple groups, respectively. Patients treated with the NeuroStar device reported greater confidence that the treatment was being performed correctly compared with those treated with the Magstim device. Conversely, with regard to tolerability, patients treated with the Magstim device reported less pain in the last week and less pain on average compared with those treated with the NeuroStar device. On average, technicians reported feeling that both the Magstim and NeuroStar devices were significantly easier to use than the Brainsway Deep TMS H-Coil device. Additionally, they found the former two devices to be more reliable and better tolerated. Furthermore, the technicians reported greater confidence in the Magstim and NeuroStar devices compared with the Brainsway Deep TMS H-Coil device and indicated that they would be more likely to recommend the two former devices to other treatment centers.

Computer Vision Tool and Technician as First Reader of Lung Cancer Screening CT Scans.

PubMed

Ritchie, Alexander J; Sanghera, Calvin; Jacobs, Colin; Zhang, Wei; Mayo, John; Schmidt, Heidi; Gingras, Michel; Pasian, Sergio; Stewart, Lori; Tsai, Scott; Manos, Daria; Seely, Jean M; Burrowes, Paul; Bhatia, Rick; Atkar-Khattra, Sukhinder; van Ginneken, Bram; Tammemagi, Martin; Tsao, Ming Sound; Lam, Stephen

2016-05-01

To implement a cost-effective low-dose computed tomography (LDCT) lung cancer screening program at the population level, accurate and efficient interpretation of a large volume of LDCT scans is needed. The objective of this study was to evaluate a workflow strategy to identify abnormal LDCT scans in which a technician assisted by computer vision (CV) software acts as a first reader with the aim to improve speed, consistency, and quality of scan interpretation. Without knowledge of the diagnosis, a technician reviewed 828 randomly batched scans (136 with lung cancers, 556 with benign nodules, and 136 without nodules) from the baseline Pan-Canadian Early Detection of Lung Cancer Study that had been annotated by the CV software CIRRUS Lung Screening (Diagnostic Image Analysis Group, Nijmegen, The Netherlands). The scans were classified as either normal (no nodules ≥1 mm or benign nodules) or abnormal (nodules or other abnormality). The results were compared with the diagnostic interpretation by Pan-Canadian Early Detection of Lung Cancer Study radiologists. The overall sensitivity and specificity of the technician in identifying an abnormal scan were 97.8% (95% confidence interval: 96.4-98.8) and 98.0% (95% confidence interval: 89.5-99.7), respectively. Of the 112 prevalent nodules that were found to be malignant in follow-up, 92.9% were correctly identified by the technician plus CV compared with 84.8% by the study radiologists. The average time taken by the technician to review a scan after CV processing was 208 ± 120 seconds. Prescreening CV software and a technician as first reader is a promising strategy for improving the consistency and quality of screening interpretation of LDCT scans. Copyright © 2016 International Association for the Study of Lung Cancer. Published by Elsevier Inc. All rights reserved.

The Development and Evolution of a Two-Year Program in IT.

ERIC Educational Resources Information Center

Cavaiani, Thomas P.; Hancock, Michael

2003-01-01

The Computer Network Support Technician program offered by Selland College of Applied Technology at Boise State University provides hands-on training on Microsoft and Cisco products. A key element is the opportunity to obtain real-world experience through internships. (JOW)

Commerical Crew Program - SpaceX

NASA Image and Video Library

2016-04-25

A technician works on the interior structure of the SpaceX Crew Dragon spacecraft at the company's facility in Hawthorne, California. SpaceX is developing its Crew Dragon in partnership with NASA’s Commercial Crew Program to carry astronauts to and from the International Space Station.

ASE Program Certification Standards for Light/Medium Duty CNG/LPG Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This publication provides the evaluation policies, procedures, and standards to which a compressed natural gas (CNG) and liquefied petroleum gas (LPG) technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may…

The Learning Exchange Program: A Cooperative Venture for Realistic Job Training

ERIC Educational Resources Information Center

Wanat, John A.

1977-01-01

A brief description and evaluation of the Learning Exchange Program (LEX), a high school cooperative education program between New Jersey local school districts and the New Jersey National Guard, in which students work alongside full-time National Guard technicians in such areas as jet engine repair, helicopter maintenance, and other technical…

Future Workforce: NSF's Advanced Technological Education Program Celebrates 20 Years of Connecting Students with STEM Careers

ERIC Educational Resources Information Center

Patton, Madeline

2014-01-01

With the leadership of community college educators and their industry partners, the National Science Foundation's Advanced Technological Education (ATE) program has achieved an impressive record of incubating innovative science, technology, engineering, and mathematics (STEM) programs. ATE's mission to increase the quality of technicians working…

Report to NATEF Board of Trustees on Certification and Update Training.

ERIC Educational Resources Information Center

Shoemaker, Byrl R.

The automotive industry continues to be the only industry that has set national standards for vocational-technical education and certification programs that meet those standards. The certification program for automotive technician training has proved that it improves the quality of training in programs at secondary and postsecondary levels.…

Use of Electronic Hand-held Devices for Collection of Savannah River Site Environmental Data - 13329

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marberry, Hugh; Moore, Winston

2013-07-01

Savannah River Nuclear Solutions has begun using Xplore Tablet PC's to collect data in the field for soil samples, groundwater samples, air samples and round sheets at the Savannah River Site (SRS). EPA guidelines for groundwater sampling are incorporated into the application to ensure the sample technician follows the proper protocol. The sample technician is guided through the process for sampling and round sheet data collection by a series of menus and input boxes. Field measurements and well stabilization information are entered into the tablet for uploading into Environmental Restoration Data Management System (ERDMS). The process helps to eliminate inputmore » errors and provides data integrity. A soil sample technician has the ability to collect information about location of sample, field parameter, describe the soil sample, print bottle labels, and print chain of custody for the sample that they have collected. An air sample technician has the ability to provide flow, pressure, hours of operation, print bottle labels and chain of custody for samples they collect. Round sheets are collected using the information provided in the various procedures. The data are collected and uploaded into ERDMS. The equipment used is weather proof and hardened for the field use. Global Positioning System (GPS) capabilities are integrated into the applications to provide the location where samples were collected and to help sample technicians locate wells that are not visited often. (authors)« less

Knowledge Transfer in Electronics: A North African Case.

ERIC Educational Resources Information Center

Benazzouz, Abderrahmane; Baez, Albert

1978-01-01

Describes a project designed to equip Algeria with a training institute for engineers and technicians based on the American experience. Initial and implementation phases of this institute established with the cooperation of ten American universities and industrial firms are presented. (HM)

Assessing the Impact and Effectiveness of the Advanced Technological Education (ATE) Program. Survey Results 2004. Volume III: Status of ATE Projects and Articulation Partnerships

ERIC Educational Resources Information Center

Coryn, Chris L.; Gullickson, Arlen R.; Hanssen, Carl E.

2004-01-01

The Advanced Technological Education (ATE) program is a federally funded program designed to educate technicians for the high-technology disciplines that drive the United State's economy. As stated in the ATE program guidelines, this program promotes improvement in technological education at the undergraduate and secondary school levels by…

A Study to Determine the Need for Development of a Vocational Education Program in Solar Energy Technology.

ERIC Educational Resources Information Center

Green, C. Paul; Orsak, Charles G.

To determine the need for the development of a vocational education program in solar energy, an advisory committee considered opportunities for solar energy technicians and the need for the development of training programs and curricula and formulated recommendations for a program and curriculum. They concluded that the immediate need for persons…

Are today's automotive technician students ready for the increased use of ethanol fuels: A study of students' perceptions of ethanol and the effects of E20

NASA Astrophysics Data System (ADS)

Mead, Gary R.

As the price of petroleum rises, the use of alternative fuels such as ethanol will continue to increase. As ethanol use increases, consumers are asking automotive technicians questions about the fuel. But how much do automotive technicians know about ethanol? In order to answer this question, a study was conducted to describe automotive technician students' knowledge, attitudes, and perceptions of ethanol as a vehicle fuel. Automotive students were chosen because they will be tomorrow's generation of technicians who will be working on vehicles that have used ethanol fuels along with flex fuel vehicles. The students were selected from six two-year technical colleges located in southern Minnesota. The six schools were chosen because they are located in areas where ethanol use is prevalent. The study used a 33-question pencil-and-paper survey to measure 184 automotive students' perceptions of ethanol. The survey revealed that students' knowledge of ethanol is very superficial. They know well advertised terms and facts, but lack an in-depth knowledge of the fuel. Also, it was discovered that several myths about ethanol still exist. Because of the lack of knowledge on technical aspects of the fuel, it is recommended that instructors in automotive programs incorporate a one to two hour class covering ethanol fuels into their courses. The second part of this study was a review of several material compatibility studies conducted at Minnesota State University, Mankato on 20% ethanol blends. The studies were conducted on fuel system rubbers, plastics, and metals. Minnesota recently enacted a law that will require all gasoline sold in the state to contain 20% ethanol. These studies were reviewed to see if 20% ethanol, E20, will cause any vehicle fuel system problems that automotive technicians should know about. After reviewing the studies it was determined that the likelihood of fuel system problems from E20 would be very small and isolated. Even though the potential for problems was found to be low, E20 information should be incorporated into an auto program's fuel class to help students understand this fuel and prevent the spread of myths.

The Impact of ATE Centers

ERIC Educational Resources Information Center

Patton, Madeline

2016-01-01

The National Science Foundation's Advanced Technological Education (ATE) program gives two year college educators leadership roles in developing model technician education programs for advanced technology fields. Since the first ATE grants were awarded in 1993, community college educators across the nation have partnered with industry and other…

Guide for Program Planning: Medical Laboratory Technician.

ERIC Educational Resources Information Center

Kahler, Carol, Ed.; And Others

Prepared by the American Association of Junior Colleges and the National Council on Medical Technology Education, this guide discusses programs for career-entry supportive medical laboratory personnel which have been cooperatively planned by junior college personnel and the medical community, particularly pathologists and medical technologists.…

MentorLinks: Advancing Technological Education, 2008-2010

ERIC Educational Resources Information Center

Hause, Ellen M., Ed.

2010-01-01

MentorLinks, part of the Advancing Technological Education program supported by the National Science Foundation and administered by the American Association of Community Colleges (AACC), provides technical assistance and networking opportunities to improve community college programs that prepare technicians in the science, technology, engineering,…

Manpower Targets and Educational Investments

ERIC Educational Resources Information Center

Ritzen, Jo M.

1976-01-01

Discusses the use of quadratic programming to calculate the optimal distribution of educational investments required to closely approach manpower targets when financial resources are insufficient to meet manpower targets completely. Demonstrates use of the quadratic programming approach by applying it to the training of supervisory technicians in…

Fulsome conundrum: solving the nation's shortage of photonics personnel with education

NASA Astrophysics Data System (ADS)

Moore, Steven D.

2002-05-01

Nationwide, photonics technicians are in short supply. Even with the recent downturn in the nation's economy, thousands of technicians are needed by traditional optics manufacturing companies, telecommunications providers, defense contractors, and other industries that rely on photonics technologies. Though many reasons have been offered to explain why the shortage has occurred, the lack of technicians remains a fulsome conundrum. This paper addresses ten hypotheses commonly cited to explain the shortage of qualified technicians. Then, the evidence that supports or disconfirms the hypothesis is explored. Direct and indirect actions are identified that photonics industries could take to help alleviate the shortage of trained personnel. Direct actions include (1) collaborating with appropriate experts to study the problem in more detail; (2) conducting outreach programs with local schools and informal education centers; and (3) helping produce K - 12 educational materials that integrate photonics concepts into all areas of the school curriculum. Indirect actions include (1) collaborating in building educational systems that encourage young people to pursue technical careers: (2) becoming part of the K-college educational enterprise; (3) lobbying federal and state governmental agencies; and (4) engaging in partnerships.

Respiratory assessment of refractory ceramic fibers in a heating technician population.

PubMed

Lucas, David; Clamagirand, Vincent; Capellmann, Pascale; Hervé, Agnès; Mauguen, Gilles; Le Mer, Yannik; Jegaden, Dominique

2018-04-01

Refractory ceramic fibers (RCF) have been extensively used for insulation in condensing boilers. The aim of this study was to evaluate the respiratory exposure to these fibers among maintenance heating technicians. We first created a working group (Carsat Brittany and Finistère Occupational Health Services) and carried out a sampling strategy. Atmospheric measurements were done during work tasks, and filters were analyzed by phase contrast microscopy (PCM) and scanning electron microscopy (SEM) in French approved laboratories. Four companies were included for a total of 15 days of work. During those 15 workdays, 12 SEM and 21 PCM samples were taken and analyzed. The phase contrast microscopy and SEM average results were 0.04 and 0.004 fibers/cm 3 , respectively. In conclusion, the study confirms heating technician RCF respiratory exposure during maintenance work for both condensation gas boilers and atmospheric boilers. Collective and individual prevention measures should be implemented along with appropriate medical follow-up.

Clean Room Facility

NASA Image and Video Library

2016-09-07

NASA Glenn technician Ariana Miller prepares an ultrahigh vacuum chamber used to test the materials used in silicon carbide based sensors and electronics that can operate at extremely high temperatures (500 degrees Celsius and higher) for applications such as sensor systems for aircraft engines and Venus exploration.

Aviation Maintenance Technology. Course Content Guides. FAA Approved Curriculum.

ERIC Educational Resources Information Center

Shrawder, Jack; And Others

Course content guides are provided for the 30 courses in this aviation maintenance technology curriculum approved by the Federal Aviation Administration. Course titles are physics for technicians; aircraft information, regulations, and procedures; aircraft assembly; fundamentals of aircraft electronics; aircraft electrical components; aircraft…

Accounting Technology Associate Degree. Louisiana Technical Education Program and Course Standards. Competency-Based Postsecondary Curriculum Outline from Bulletin 1822.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document outlines the curriculum of Louisiana's accounting technology associate degree program, which is a 6-term (77-credit hour) competency-based program designed to prepare students for employment as accounting technicians providing technical administrative support to professional accountants and other financial management personnel.…

Special Concretes and Field Problems; Instructor's Guide; Pilot Program Edition.

ERIC Educational Resources Information Center

Portland Cement Association, Cleveland, OH.

This guide, prepared for a 2-year program in junior colleges and technical institutes, is designed for a national program to train persons for employment as technicians in the cement and concrete industries. Included are 48 session oultines divided into four units of study. Each unit contains session objectives and outlines, presentation outlines,…

A Study of the Awareness Level of Electric Vehicle Technology in California Community College Automotive Curriculums.

ERIC Educational Resources Information Center

Keyzer, James

California automotive technician programs were surveyed regarding their awareness of the impact that mandates of the Clean Air Act would have on their automotive technology programs. A questionnaire was sent to 100 California community colleges with an automotive technology program; 49 usable questionnaires were returned. A possible byproduct of…

Robot welding process control development task

NASA Technical Reports Server (NTRS)

Romine, Peter L.

1992-01-01

The completion of, and improvements made to, the software developed during 1990 for program maintenance on the PC and HEURIKON and transfer to the CYRO, and integration of the Rocketdyne vision software with the CYRO is documented. The new programs were used successfully by NASA, Rocketdyne, and UAH technicians and engineers to create, modify, upload, download, and control CYRO NC programs.

A Two-Year Water Quality Monitoring Curriculum.

ERIC Educational Resources Information Center

Glazer, Richard B.; And Others

The Environmental Protection Agency developed this curriculum to train technicians to monitor water quality. Graduates of the program should be able to monitor municipal, industrial, and commercial discharges; test drinking water for purity; and determine quality of aquatic environments. The program includes algebra, communication skills, biology,…

Program of Teacher Education for Environmental Technology (POTEET).

ERIC Educational Resources Information Center

National Sanitation Foundation, Ann Arbor, MI.

The environmental technician, a new but necessary subordinate of a professional environmentalist, might be employed by a health department, natural resources commission, state agriculture department, municipal water plant, or by business or industry in self-inspection and corrective activities. The Program of Teacher Education for Environmental…

Diesel Service Technician. Program CIP: 47.0605

ERIC Educational Resources Information Center

Agee, Kelly, Ed.

2010-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Automotive Service Technician. Program CIP: 47.0604 - Transportation

ERIC Educational Resources Information Center

Agee, Kelly, Ed.

2008-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

MentorLinks: Advancing Technological Education, 2005-2007

ERIC Educational Resources Information Center

Hause, Ellen M., Ed.

2008-01-01

The goals of the MentorLinks: Advancing Technological Education program, supported by the National Science Foundation and administered by the American Association of Community Colleges (AACC), are to provide technical assistance and networking opportunities for the purpose of improving community college programs that prepare technicians in the…

Effects of occupational exposure of X-Ray on hematological parameters of diagnostic technicians

NASA Astrophysics Data System (ADS)

Taqi, Ali H.; Faraj, Kharman A.; Zaynal, Sarah A.; Hameed, Ahmed M.; Mahmood, Abd-Alkader A.

2018-06-01

The aim of this study was to identify the effects of long term exposure of X-ray on diagnostic technicians which they work at Kirkuk hospitals through examining some hematological parameters which are white blood cells (WBC), Neutrophils, Lymphocyte, Monocyte, Eosinophil, Basophil, Reactive Lymphocyte, red blood cells (RBC), hemoglobin (Hb), hematocrit (HCT), Mean Cell Volume (MCV), Mean Corpuscular Hemoglobin (MCH), Mean Cell Hemoglobin Concentration (MCHC), Red Cell Distribution Width (RDW), Platelet (PLT). The study included 54 male diagnostic technicians and 54 male healthy controls match with the first group to show any alteration of the hematological parameters. The diagnostic technicians divided into two groups depending on their work experience and hours working per day. The statistical analysis was performed using (Graph-pad) program. Our results showed that the Complete blood cells count (CBC) parameters (Neutrophil, Monocytes, Basophile, MCV, RDW and PLT) significantly (P<.05) decreased while the parameters (Lymphocytes, RBC, Hb and HCT) significantly (P<.05) increased and strong significantly (P<.0001) increasing was recorded for the parameter Reactive lymphocytes mostly in all groups of the diagnostic technicians compared with their controls. We concluded that chronic exposure of X-ray can significantly alter some hematological parameters and the number of hours working per day has observable effects on the some hematological parameters. We recommended training and courses about hazard of ionizing radiation should be organized for enhance the healthcare quality of the technicians and to improve their knowledge about benefit of radiation protection tools to protect themselves from any overexposure during the daily life.

Computers Help Technicians Become Managers.

ERIC Educational Resources Information Center

Instructional Innovator, 1984

1984-01-01

Briefly describes the Academy of Advanced Traffic's use of the Numerax electronic tariff library in financial management, business logistics management, and warehousing courses to familiarize future traffic managers with time saving computer-based information systems that will free them to become integral members of their company's decision-making…

41 CFR 300-3.1 - What do the following terms mean?

Code of Federal Regulations, 2014 CFR

2014-07-01

... to the operation of the aircraft (e.g., as pilots, co-pilots, flight engineers, navigators) or duties assisting in operation of the aircraft (e.g., as flight directors, crew chiefs, electronics technicians... official travel, including travel planning, authorization, reservations, ticketing, expense reimbursement...

41 CFR 300-3.1 - What do the following terms mean?

Code of Federal Regulations, 2012 CFR

2012-07-01

... to the operation of the aircraft (e.g., as pilots, co-pilots, flight engineers, navigators) or duties assisting in operation of the aircraft (e.g., as flight directors, crew chiefs, electronics technicians... official travel, including travel planning, authorization, reservations, ticketing, expense reimbursement...

41 CFR 300-3.1 - What do the following terms mean?

Code of Federal Regulations, 2013 CFR

2013-07-01

... to the operation of the aircraft (e.g., as pilots, co-pilots, flight engineers, navigators) or duties assisting in operation of the aircraft (e.g., as flight directors, crew chiefs, electronics technicians... official travel, including travel planning, authorization, reservations, ticketing, expense reimbursement...

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician moves a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

NASA Image and Video Library

2003-08-27

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician moves a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician turns on a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

NASA Image and Video Library

2003-08-27

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician turns on a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

Generalized peripheral neuropathy in a dental technician exposed to methyl methacrylate monomer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donaghy, M.; Rushworth, G.; Jacobs, J.M.

1991-07-01

A 58-year-old dental prosthetic technician developed generalized sensorimotor peripheral neuropathy. Neurophysiologic studies showed a generalized sensorimotor neuropathy of axonal degeneration type. Examination of a sural nerve biopsy showed a moderately severe axonal neuropathy with loss of large myelinated fibers and unmyelinated axons. There was evidence of slow ongoing degeneration and considerable fiber regeneration. Electron microscopy showed increased numbers of filaments in a few fibers. These findings show resemblances to the nerve changes caused by another acrylic resin, acrylamide. They suggest that the neuropathy may have been caused by 30 years of occupational cutaneous and inhalational exposure to methyl methacrylate monomermore » since they excluded other recognized causes of neuropathy.« less

Automotive Technology. 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document examines the origins and content of Ohio's Automobile Technician Training Certification Program, which is designed to improve the quality of training offered at secondary and postsecondary schools throughout Ohio. The document begins with a brief overview of the certification program, which is under the oversight of the Board of the…

Post-Secondary Program in Production Agriculture at Michigan State

ERIC Educational Resources Information Center

Gibson, James L.; Knoblauch, Wayne A.

1974-01-01

The ten-year decline in enrollment in vocational agriculture technician level programs has reversed in Michigan, reflecting the recent turn-around in farm prices, increased federal funding, technical progress in production agriculture, and increased employment demands for graduates. Growing local interest is seen in rising demands for vocational…

Mentoring and the Business Environment: Asset or Liability?

ERIC Educational Resources Information Center

Caruso, Richard E.

A study examined mentoring as a means of furthering the career development of managers, technicians, and highly skilled workers employed by Motorola Incorporated, which has had a formal mentoring program in operation since 1980. Senior managers and new employees who were paired in Motorola's mentoring program were surveyed to determine their…

OUTLINE OF VOCATIONAL TRAINING IN ZAMBIA.

ERIC Educational Resources Information Center

Australian Dept. of Labour and National Service, Perth.

THE 1963 POPULATION OF ZAMBIA WAS APPROXIMATELY 3.5 MILLION. THE 8-YEAR PRIMARY EDUCATION PROGRAM IS FOLLOWED BY SECONDARY, SECONDARY TECHNICAL, AND TRADE SCHOOL OPTIONS. THERE IS AN INCREASE IN ADULT EDUCATION AT THE PRIMARY AND SECONDARY LEVELS. CRAFT AND TECHNICIAN LEVEL PROGRAMS ARE CONDUCTED AT NORTHERN TECHNICAL COLLEGE AND ITS ANCILLARY…

20 CFR 702.441 - Claims for loss of hearing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... program authorized pursuant to 29 CFR 1910.95(g)(3) promulgated under the Occupational Safety and Health... conservation programs pursuant to the Occupational Safety and Health Act of 1970 should be followed (as... certified audiologist, by a physician certified by the American Board of Otolaryngology, or by a technician...

Shopping for Jobs: Mall Internship Program Opens Doors for HVAC Students.

ERIC Educational Resources Information Center

Nolot, Terry

1995-01-01

Ivy Tech State College uses River Falls, a shopping mall, as an enormous heating, ventilation, and air conditioning laboratory. Students spend Saturdays working with full-time technicians getting invaluable training and experience. Students see the program as a professional opportunity and a direct route to jobs. (JOW)

Illinois Occupational Skill Standards: HVAC/R Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in the heating, ventilation, air conditioning, and refrigeration (HVAC/R) industry. Agency partners involved in this project include: the…

Energy Related Technology Programs at the Non-Baccalaureate Postsecondary Level.

ERIC Educational Resources Information Center

Brooking, Walter J.

Guidelines are presented for institution administrators considering the initiation of programs to train energy-related technicians at the associate degree level. Two essential preliminary steps are outlined: Acquiring and analyzing all available information about the proposed field including national legislation and surveying the probable need for…

Heavy Construction Equipment Mechanic; A Suggested Guide for a Training Course.

ERIC Educational Resources Information Center

Division of Manpower Development and Training. , BAVT.

Prepared by a technical writer for the Division of Manpower Development and Training, this guide is intended to aid instructors, supervisors, and administrators of vocational education and manpower training programs in establishing training programs for mechanics and technicians entering the occupation of servicing heavy construction equipment.…

The contribution of distance education to health promotion in Chile.

PubMed

Salinas, Judith; Muñoz, Carolina; Albagli, Andrea; Araya, Gloria; Vio, Fernando

2017-10-01

The objective of this paper is to present the distance education's contribution to developing health promotion in Chile, through evaluation of a postgraduate certificate program for professionals, and a training course for nurse technicians working in primary healthcare, with an 8-month follow-up after program completion. The program methodology was participatory, interactive and reflective, with mentoring support, exercises, group work and discussions as well as content pertinent to the needs of practice. The evaluation was quali-quantitative with an analysis of the student profile, the implementation process, outcomes at the end of the training and impacts on workplace changes. The results showed a high rate of student approval (87 and 76%), good academic performance and a high level of satisfaction with the methodology and knowledge delivered. The participants' final projects were adapted to local work places realities and were implemented by 62.6% of technicians and 43% of professionals, in addition to changes in work practices that favor health promotion. The level of fulfillment of participants' expectations was very high and the most frequent barriers to implementing the final project were lack of time and personnel, along with minimal support from management and low prioritization of health promotion. This study shows the effectiveness of a distance training model for professionals and technicians that can reach the most remote parts of the country, where there is no access to presencial training, with an educational program centered on work activities and current health challenges. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

EC95-42939-3

NASA Image and Video Library

1995-02-02

The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

EC95-42939-5

NASA Image and Video Library

1995-02-02

The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

GPA/GPSA/OSU-Okmulgee natural gas compression technician training program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doede, S.

Approximately one year ago, OSU-Okmulgee and the Gas Processors Association began discussions about the possibility of developing a natural Gas Technician Training Program for GPA members. Following a presentation to the Membership and Services Committee, Chairman John Ehlers solicited and obtained the approval of the GPA Executive Committee to sponsor the program. Participation in the program was also made available to GPSA members. The purpose of the program is to upgrade the technical competency and professional level of incoming natural gas compression technicians. It educates students to analytically diagnose, service and maintain gas compression equipment and systems using industry recommendedmore » procedures, special tools and service information. It also provides course content, which will enable successful graduates to advance in position after additional experience, and to understand new systems, technologies and components as they are introduced. The two-year Associate-In-Applied Science Degree program includes six successive college semesters. Nearly one-half of the time is designated for technical/academic education at Oklahoma State University-Okmulgee with the balance of time allocated for on-the-job internship experiences at sponsoring GPA/GPSA members. Each block of technical education and general education course work is followed by an immediate work experience time period designated to reinforce the technical and general education. These time periods are approximately seven and one-half weeks in length each. It is essential for the success of the students and the program that the students' education at OSU-Okmulgee and work experiences at GPA/GPSA member facilities be closely aligned for maximum student learning and retention. In addition to technical classes on gas compression equipment and components, the courses offered in math, speech, technical writing, psychology and ethics for example, prepare students to be able to communicate well, get along with others and be responsible and productive employees.« less

Motivation of animal care technicians through recognition.

PubMed

Symonowicz, Cammie; Critelli, Linda; Straeter, Pamela

2006-01-01

Keeping employees motivated is a challenge faced by managers in the field of laboratory animal science and in the business world at large. Using Maslow's 'Hierarchy of Needs' theory as a guide, the authors describe how managers can create a recognition program to keep employees feeling happy and rewarded. They discuss programs used at Bristol-Myers Squibb and share lessons learned from various programs.

A Model Secondary/Postsecondary Program to Prepare Students for Employment in High Technology Occupations. Final Report.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

The Leander Independent School District in Austin, Texas, undertook a project to (1) research the training needs for high-technology occupations in the Greater Austin area, (2) develop a statewide model of an articulated 2 + 2 program to prepare students for careers as technicians, and (3) implement the articulated 2 + 2 program with Austin…

A Program Like Any Other…Like None Other: Sustaining a Laboratory Science Technology Program for Deaf and Hard-of-Hearing Students

ERIC Educational Resources Information Center

Pagano, Todd; Ross, Annemarie D.; O'Neill, George J.

2012-01-01

A goal of the Laboratory Science Technology program at the National Technical Institute for the Deaf, a college of Rochester Institute of Technology, is to produce graduates with strong foundations in applied science, hands-on laboratory applications, and "soft skills" necessary for competitive employment as laboratory technicians.…

Successful Career Progression: Exploratory Findings from a Study of Selected Occupations.

ERIC Educational Resources Information Center

O'Shea, Daniel P.; Betsinger, Alicia M.; King, Christopher T.

A study examined the career progression of individuals in the following occupations: registered nurse; physical therapist; medical laboratory technologist; paramedic; ranked corrections officer; dental hygienist; electronic technician; pipefitter/plumber; social worker; and auto body shop manager. Researchers conducted face-to-face interviews in…

Performance of nursing auxiliaries and technicians in managing piercing cutting material: a necessary study.

PubMed

Moura, Elaine Cristina Carvalho; Moreira, Maria de Fátima Santana; da Fonseca, Soraia Martins

2009-01-01

This study aimed to analyze the knowledge of nursing auxiliaries and technicians in handling and disposing of piercing-cutting material and describe their performance. This qualitative-descriptive research was carried out with three nursing auxiliaries and 12 technicians at a medium-size hospital, totaling 15 participants interviewed through a semi-structured script. Discourse was analyzed through the content analysis technique. Results appoint that, even though the participants have theoretical knowledge on the management of piercing-cutting material, they do not totally follow their knowledge, which exposes them to several biological risks, revealing reproductive knowledge and performance. Thus, we propose the implementation of continuing education programs based on constructivist methodological approach aiming at effective practices in the management and disposal of piercing-cutting material. In this perspective, research clarifying how adults apprehend knowledge can deepen the results described in the study.

A DIY Ultrasonic Signal Generator for Sound Experiments

ERIC Educational Resources Information Center

Riad, Ihab F.

2018-01-01

Many physics departments around the world have electronic and mechanical workshops attached to them that can help build experimental setups and instruments for research and the training of undergraduate students. The workshops are usually run by experienced technicians and equipped with expensive lathing, computer numerical control (CNC) machines,…

Proof-of-Principle High Speed Electronic Imaging System. Phase 2.

DTIC Science & Technology

1988-03-01

Winchenbach George Streckmann I Martha Martinez John Krieger Joe Parker John Morris Ann Coverston ." Karen Hollis Gregg Abate I... , .. ", .t ii i...R. J. Kelley, manager of the research facility, allocated space and locations for the equipment, and assigned John Krieger , technician, to us to

Using Animation to Improve the Students' Academic Achievement on Bipolar Junction Transistor

ERIC Educational Resources Information Center

Zoabi, W.; Sabag, N.; Gero, A.

2012-01-01

Teaching abstract subjects to students studying towards a degree in electronics practical engineering (a degree between a technician and an engineer) requires didactic tools that enable understanding of issues without using advanced mathematics and physics. One basic issue is the BJT (Bipolar Junction Transistor) that requires preliminary…

Fire, Fuel, and Smoke Science Program 2015 Research Accomplishments

Treesearch

Faith Ann Heinsch; Charles W. McHugh; Colin C. Hardy

2016-01-01

The Fire, Fuel, and Smoke Science Program (FFS) of the U.S. Forest Service, Rocky Mountain Research Station focuses on fundamental and applied research in wildland fire, from fire physics and fire ecology to fuels management and smoke emissions. Located at the Missoula Fire Sciences Laboratory in Montana, the scientists, engineers, technicians, and support...

The Next Generation of Technicians Prepare for Their Future

ERIC Educational Resources Information Center

Wise, Jennifer

2007-01-01

For Phoenix's East Valley Institute of Technology's (EVIT) automotive technology program, a unique partnership with local industry leaders is a key to success. Due to a highly successful partnership with Automotive Youth Educational Systems (AYES), EVIT has been named the number one high school automotive program in the United States for placement…

Queens Tri-School Confederation, 1991-92 Evaluation Report.

ERIC Educational Resources Information Center

Hannah, Susan; Dworkowitz, Barbara

An evaluation was done of the Queens Tri-School Confederation, three high schools in the New York City Public Schools funded by a federal grant from the Magnet Schools Assistance Program. The grant provided Hillcrest, Jamaica, and Thomas A. Edison High Schools with funds to develop or expand emergency technician programs at Hillcrest; a law…

THE WASHINGTON DATA PROCESSING TRAINING STORY.

ERIC Educational Resources Information Center

MCKEE, R.L.

A DATA PROCESSING TRAINING PROGRAM IN WASHINGTON HAD 10 DATA PROCESSING CENTERS IN OPERATION AND EIGHT MORE IN VARIOUS STAGES OF PLANNING IN 1963. THESE CENTERS WERE FULL-TIME DAY PREPARATORY 2-YEAR POST-HIGH SCHOOL TECHNICIAN TRAINING PROGRAMS, OPERATED AND ADMINISTERED BY THE LOCAL BOARDS OF EDUCATION. EACH SCHOOL HAD A COMPLETE DATA PROCESSING…

2007 Mississippi Curriculum Framework: Secondary Diesel Service Technology. (Program CIP: 47.0605 - Diesel Mechanics Technology/Technician)

ERIC Educational Resources Information Center

Ellison, Dave; Jackson, Edward

2007-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Laboratory Manual (For Concrete Instruction Course); Instructor's Guide, Pilot Program Edition.

ERIC Educational Resources Information Center

Portland Cement Association, Cleveland, OH.

This laboratory manual, prepared for a 2-year program in junior colleges and technical institutes, is designed to accompany the instructional materials to train persons for employment as technicians in the cement and concrete industries. Included are 16 laboratory assignments for each of the following: (1) Principles of Concrete, (2) Concrete in…

A Dissemination Model for New Technical Education Programs. Final Report.

ERIC Educational Resources Information Center

Hull, Daniel M.

The Technical Education Research Center-SW has conceived, tested, and refined a model for disseminating newly developed programs and materials throughout the nation. The model performed successfully in the dissemination of more than 50,000 educational units (modules) of Laser/Electro-Optics Technician (LEOT) materials during a four-year period…

Electro-Optical Laser Technology. Curriculum Utilization. Final Report.

ERIC Educational Resources Information Center

Nawn, John H.

This report describes a program to prepare students for employment as laser technicians and laser operators and to ensure that they have the necessary skills required by the industry. The objectives are to prepare a curriculum and syllabus for an associate degree program in Electro-Optical Laser Technology. The 2-year Electro-Optical Laser program…

Concrete in the Field-II; Instructor's Guide; Pilot Program Edition.

ERIC Educational Resources Information Center

Portland Cement Association, Cleveland, OH.

This guide, prepared for a 2-year course in junior colleges and technical institutes, is designed to be a national program to train persons for employment as technicians in the cement and concrete industries. Included are 48 session outlines divided into six units of study. Each unit contains objectives, outline, related information, and…

A Pre-Engineering Program Using Robots to Attract Underrepresented High School and Community College Students

ERIC Educational Resources Information Center

Mosley, Pauline Helen; Liu, Yun; Hargrove, S. Keith; Doswell, Jayfus T.

2010-01-01

This paper gives an overview of a new pre-engineering program--Robotics Technician Curriculum--that uses robots to solicit underrepresented students pursuing careers in science, technology, engineering, and mathematics (STEM). The curriculum uses a project-based learning environment, which consists of part lecture and part laboratory. This program…

Laboratory Animal Technician | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Laboratory Animal Sciences Program (LASP) provides exceptional quality animal care and technical support services for animal research performed at the National Cancer Institute at the Frederick National Laboratory for Cancer Research. LASP executes this mission by providing a broad spectrum of state-of-the-art technologies and services that are focused

Senior Laboratory Animal Technician | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Laboratory Animal Sciences Program (LASP) provides exceptional quality animal care and technical support services for animal research performed at the National Cancer Institute at the Frederick National Laboratory for Cancer Research. LASP executes this mission by providing a broad spectrum of state-of-the-art technologies and services that are focused

2006 Mississippi Curriculum Framework: Secondary Forestry. (Program CIP: 03.0511 - Forestry Technology/Technician)

ERIC Educational Resources Information Center

Research and Curriculum Unit, 2006

2006-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Principles of Concrete, Instructor's Manual; Pilot Program Edition.

ERIC Educational Resources Information Center

Portland Cement Association, Cleveland, OH.

This guide, prepared for a 2-year course in junior colleges and technical institutes, is designed to be a national program to train persons for employment as technicians in the cement and concrete industries. Included are 48 session outlines divided into four units of study. Each unit contains objectives, outline, related information, and…

Toyota/Skyline Technical Education Network. Cooperative Demonstration Program. Final Performance Report.

ERIC Educational Resources Information Center

Skyline Coll., San Bruno, CA.

A joint project was conducted between Toyota Motor Sales and Skyline College (in the San Francisco, California, area) to create an automotive technician training program that would serve the needs of working adults. During the project, a model high technology curriculum suitable for adults was developed, the quality of instruction available for…

An Action Research Project: Development of a Pre-Licensure Examination Review Course for Emergency Medical Technician Program Graduates at a Rural Community College

ERIC Educational Resources Information Center

Boucher, Daryl

2013-01-01

This action research project examined how "Efficiency in Learning" ("EL") strategies, "Appreciative Inquiry" ("AI") and the "Interactive Model of Program Planning" ("IMPP") could be used to discern the content and preferred pedagogical approaches in the development of a pre-licensure…

Hazardous Materials Technology: A Community College's Response to a Critical Employment Need.

ERIC Educational Resources Information Center

Friedel, Janice N.; And Others

Studies conducted by the Eastern Iowa Community College District in 1986 revealed a lack of credit programs and curricula for training individuals in the technical aspects of hazardous materials management and need for hazardous materials technicians by local industry. In response, an associate of applied science (AAS) degree program in Hazardous…

Employability Competencies for Entry Level Emergency Medical Aides.

ERIC Educational Resources Information Center

Werner, Claire

This document describes competencies needed by persons who complete the Los Angeles Schools' emergency medical aide competency-based program, which is designed to enhance their ability to obtain certification as an Emergency Medical Technician (EMT). The overall competency statement ("goal") of the program heads each page and is defined by one or…

Final Environmental Assessment, Assured Aerospace Fuels Research Facility, Wright-Patterson Air Force Base, Ohio

DTIC Science & Technology

2008-09-01

Fish and Wildlife Services Amir Mott Program Manager 88 ABW/CECW Zachary Olds WPAFB Air and Water Program Technician 88 ABW/CEV Warren Richardson...Building 22 Wright Patterson AFB, OH 45433-5209 Dear Mr. Baker: BOARD OF DIRECTORS William E. Lukens Gayle B. Price, Jr. Thomas B. Rentschler GENERAL

Technicians listen to instructions during STS-44 DSP / IUS transfer operation

NASA Technical Reports Server (NTRS)

1991-01-01

Clean-suited technicians, wearing headsets, listen to instructions during Defense Support Program (DSP) satellite / inertial upper stage (IUS) transfer operations in a processing facility at Cape Canaveral Air Force Station. In the background, the DSP satellite atop an inertial upper stage (IUS) is readied for transfer to a payload canister transporter. DSP, a surveillance satellite that can detect missle and space launches as well as nuclear detonations will be boosted into geosynchronous Earth orbit by the IUS during STS-44 mission. View provided by the Kennedy Space Center (KSC) with alternate number KSC-91PC-1748.

PA-30 Twin Comanche - NASA 808 in hangar

NASA Image and Video Library

1980-05-05

Technicians check instrumentation and systems on NASA 808, a PA-30 aircraft, prior to a research flight. The aircraft was used as the testbed in development of control systems for remotely piloted vehicles that were "flown" from the ground. The concept led to highly successful programs such as the HiMAT and the subscale F-15 remotely piloted vehicles. Over the years, NASA 808 has also been used for spin and stall research related to general aviation aircraft and also research to alleviate wake vortices behind large jetliners. This 1980 photograph taken inside a hangar shows technicians measuring moment of inertia.

40 CFR 82.40 - Technician training and certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... address in § 82.38(a) verification that the program meets all of the following standards: (1) Training... training, training through self-study of instructional material, or on-site training involving instructors...

The Upside of an Annual Survey in Light of Involvement and Use: Evaluating the Advanced Technological Education Program

ERIC Educational Resources Information Center

Toal, Stacie A.; Gullickson, Arlen R.

2011-01-01

In 1999, the National Science Foundation (NSF) awarded funds to the Evaluation Center at Western Michigan University to conduct an external evaluation of the Advanced Technological Education (ATE) program. ATE, a federally mandated program designed to increase the number and quality of skilled technicians in the U.S. workforce, has funded over 346…

Nuclear Technology Series. Nuclear Reactor (Plant) Operator Trainee. A Suggested Program Planning Guide. Revised June 80.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This program planning guide for a two-year postsecondary nuclear reactor (plant) operator trainee program is designed for use with courses 1-16 of thirty-five in the Nuclear Technology Series. The purpose of the guide is to describe the nuclear power field and its job categories for specialists, technicians and operators; and to assist planners,…

Introducing a checking technician allows pharmacists to spend more time on patient-focused activities.

PubMed

Napier, Patti; Norris, Pauline; Braund, Rhiannon

2018-04-01

Internationally there is an increasing focus on the clinical and cognitive services that pharmacists can provide. Lack of time has been identified as a barrier to pharmacists increasing their clinical activities. Within the pharmacy workplace there are many tasks that can only be performed by a pharmacist. The final accuracy check of a dispensed prescription is currently the sole responsibility of pharmacists in New Zealand. This takes up a significant amount of time during a pharmacist's work day. The introduction of a checking technician role has been suggested to allow pharmacists more time to do more patient focused work. To investigate the amount of time pharmacy staff spend on specific activities and to establish whether the introduction of a checking technician into twelve pilot sites increased the amount of time that the pharmacists could spend on patient focused activities. This study utilised a self-reported work sampling technique in twelve pilot sites, selected from both the hospital and community settings. Work sampling using an electronic device was conducted at two time-points (before the implementation of a Pharmacy Accuracy Checking Technician (PACT) role and when the PACT was in place). Data was collected at 10 min intervals for the period of five days, a working week. Tasks were grouped into patient focused, dispensing and personal activities. The introduction of the PACT into the pilot sites saw a mean increase of 19% in pharmacists' patient focused activities and a mean 20% decrease in dispensing activities. The introduction of a checking technician role into New Zealand pharmacies demonstrated the potential to provide pharmacists with more time to spend on patient focused activities. Copyright © 2017 Elsevier Inc. All rights reserved.

Boys of Coshocton: Part One

ScienceCinema

Feikert, Ray; Estep, Meriem; Blair, Olive; Fortune, Sam

2018-05-07

Sam Fortune Jr. lost his job during Christmas week 2007. Hope finally came more than a year later when an ad in the local paper announced a job for heating technicians through a local home weatherization program.

Teaching Emergency Care to First-Year Medical Students

ERIC Educational Resources Information Center

McCally, Michael; And Others

1977-01-01

At the George Washington University School of Medicine a 52-hour course in emergency care was adapted for first-year medical students from an 81-hour program for training emergency medical technicians. (Author/LBH)

The Auto Industry's New Model. Car Companies and Community Colleges Collaborate to Provide High-Technology Training.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

1991-01-01

Major auto manufacturers have developed cooperative apprenticeship programs with community colleges, offering alternating periods of study and work experience under the supervision of master technicians. (SK)

DFRC F-16 aircraft fleet and support crew

NASA Technical Reports Server (NTRS)

1995-01-01

The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and is primarily used in engine tests and for parts. Although it is flight-worthy, it is not currently flown at Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

The Influence of Skill Development Training Program for Spiritual Care of Elderly Individual on Elderly Care Technician Students' Perception of Spiritual Support.

PubMed

Bulduk, Serap; Usta, Esra; Dinçer, Yeliz

2017-06-01

Spiritual care means helping an individual protect, maintain and gain all the dimensions of his/her existence. Elderly care technicians face numerous cases or crisis situations in which elderly individuals from different backgrounds question the meaning and value of life. Elderly care technicians must acknowledge that the spirituality is an important element in the way an elderly individual receives healthcare and they must be equipped for this matter. This study was conducted in order to examine the influence of "Skill Development Training Program for Spiritual Care of Elderly Individual," which was carried out with students from elderly care program, on the perception of spirituality support in a pretest-posttest quasi-experimental study design with control group. As the data collection form, "Spiritual Support Perception" (SSP) scale was used. The mean scores of the intervention group after the training and after one month are 50.39 ± 5.34 and 51.13 ± 4.98, respectively, and those of the control group are 43.16 ± 4.83 and 42.72 ± 4.48. A statistically significant difference was found between the mean scores of the intervention group from the pretest and the posttests immediately after the training and one month after the training (f = 94.247, p = 0.001). In the control group, however, there was no significant change in the SSP mean scores (f = 0.269, p = 0.77). As a result, this study pointed out the necessity of such training programs for healthcare professionals to make a distinction between their professional duties and their own personalities in order to offer spiritual care to the elderly individual.

Fire, Fuel, and Smoke Program: 2014 Research Accomplishments

Treesearch

Faith Ann Heinsch; Robin J. Innes; Colin C. Hardy; Kristine M. Lee

2015-01-01

The Fire, Fuel, and Smoke Science Program (FFS) of the U.S. Forest Service, Rocky Mountain Research Station focuses on fundamental and applied research in wildland fire, from fire physics and fire ecology to fuels management and smoke emissions. Located at the Missoula Fire Sciences Laboratory in Montana, the scientists, engineers, technicians, and support staff in FFS...

Med-Tech Program. Tech Prep Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

Staff from DuSable High School in Chicago, Illinois, collaborated with Malcolm X College and three area hospitals to develop a medical technician training program focusing on career awareness and development of the basic reading and math skills needed for any career. A 3-year Med Tech curriculum for grades 9, 10, and 11 and a career awareness…

The Curriculum Development Project for the Medical Laboratory Technology Program at Miami-Dade Junior College, Miami, Florida. Final Report.

ERIC Educational Resources Information Center

Miami-Dade Junior Coll., FL. Div. of Allied Health Studies.

During Phase I of an Allied Health Professions Basic Improvement Grant, a five-member committee developed a curriculum for a medical laboratory technology program at Miami-Dade Junior College by: (1) defining competencies which differentiate a certified laboratory assistant from a medical laboratory technician, (2) translating expected laboratory…

2005 Mississippi Curriculum Framework: Secondary Vehicle and Mobile Equipment Technician. (Program CIP: 47.0699 - Vehicle Maintenance and Repair Technology, Other)

ERIC Educational Resources Information Center

Brackeen, Scott; Freeman, Roscoe; Tiblier, Chris; Batton, James; Ealy, Houston; Simmons, Gerald

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

2005 Mississippi Curriculum Framework: Secondary General Drafting. (Program CIP: 15.1301 - Drafting and Design Technology/Technician, General)

ERIC Educational Resources Information Center

Kirk, Karen; Ladner, Daryl; Lewis, Carroll; Moran, Sheryl; Schneider, Chester; Strickland, Ruth Ann; Welch, Amanda

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

2007 Mississippi Curriculum Framework: Secondary Automotive Collision Repair Technology. (Program CIP: 47.0603 - Autobody/Collision and Repair Technology/Technician)

ERIC Educational Resources Information Center

Dowds, Eris; Anderson, Daniel; Sizemore, Rick; Johnson, John

2007-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Success Factors of E-Learning Projects: A Technical Perspective

ERIC Educational Resources Information Center

Alhomod, Sami; Shafi, Mohd Mudasir

2013-01-01

The aim of this study is to identify the success factors of e learning programs in King Saud University from an engineer and technician's point of view. An extensive study of existing literature was done to determine the 11 success factors of e learning program. The factors identified as success factors are: Sufficient Users Training,…

Reemployment Assistance for Engineers, Scientists, and Technicians Unemployed Because of Aerospace and Defense Cutbacks. Report to Congress.

ERIC Educational Resources Information Center

Comptroller General of the U.S., Washington, DC.

As a report on the Department of Labor's Technology Mobilization and Reemployment (TMR) program, findings and conclusions from an evaluative review are presented in this volume. Information is obtained from state eployment security offices in Los Angeles and Van Nuys, California; Seattle; Denver; and New Orleans. The program accomplishments are…

Fire, Fuel, and Smoke Science Program: 2013 Research accomplishments

Treesearch

Faith Ann Heinsch; Robin J. Innes; Colin C. Hardy; Kristine M. Lee

2014-01-01

The Fire, Fuel, and Smoke Science Program (FFS) of the U.S. Forest Service, Rocky Mountain Research Station, focuses on fundamental and applied research in wildland fire, from fire physics and fire ecology to fuels management and smoke emissions. Located at the Missoula Fire Sciences Laboratory in Montana, the scientists, engineers, technicians, and support staff in...

Industrial Maintenance Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as industrial maintenance technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi…

Attitudes of College Students Enrolled in 2-Year Health Care Programs towards Online Learning

ERIC Educational Resources Information Center

Abdulla, Dalya

2012-01-01

Colleges offering 2-year diplomas to high-school graduates were among the forefront leaders in online learning however studies illustrating appropriate course construction for such student populations are scarce. Pharmacy Math (MATH16532) is a core course for students enrolled in the Practical Nursing (PN) and Pharmacy Technician (PT) programs at…

Development and Implementation of Training Curriculum/Program in Solar Heating and Cooling at the Technician Level, December 1, 1976 - November 30, 1977. Final Report.

ERIC Educational Resources Information Center

Kuhnle, Carl J., Jr.

The program proposal is designed to address the increasing demand for trained personnel to support the installation and maintenance of solar energy systems at residential and commercial sites. The three main objectives of the proposed program are: (1) to develop a flexible curricula to train a solar heating and cooling workforce; (2) to identify…

Best Manufacturing Practices Survey Conducted at Motorola, Incorporated Government Electronics Group Scottsdale, Arizona

DTIC Science & Technology

1988-03-01

operators recommendations, certain select individuals are trained and used as SPC technicians. " POKA - YOKE " or mistake proofing from Shiegeo Shingo’s "Zero...Quality Control: Source Inspection and the POKA - YOKE System" has been locally applied to operators processes with great success. This pre-control

A Comparative Analysis Between the Navy Standard Workweek and the Work/Rest Patterns of Sailors Aboard U.S. Navy Cruisers

DTIC Science & Technology

2009-09-01

CTM) personnel install, configure, diagnose, and repair state-of-the- art electronic, computer, and network hardware/software systems ashore and...participants consisted of a Culinary Specialist and a Fire Control Technician (not actively involved with Combat System operations). 26 Figure 10

Communications Technician, 5-3A. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

These assignments and text for a secondary-postsecondary level correspondence course in electronic communications comprise one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Purpose of the individualized, self-paced course is to provide…

Using Tablet Applications for Children with Autism to Increase Their Cognitive and Social Skills

ERIC Educational Resources Information Center

Esposito, Marco; Sloan, Janette; Tancredi, Andrea; Gerardi, Giovanna; Postiglione, Paola; Fotia, Francesca; Napoli, Eleonora; Mazzone, Luigi; Valeri, Giovanni; Vicari, Stefano

2017-01-01

Several researchers along with technicians have been developing software and hardware to support and/or replace the standard method of teaching for children with autism spectrum disorders (ASDs) and/or other developmental disabilities. Moreover, computer-based intervention and electronic tablets have shown benefits for people with special needs…

Web Usage Mining Analysis of Federated Search Tools for Egyptian Scholars

ERIC Educational Resources Information Center

Mohamed, Khaled A.; Hassan, Ahmed

2008-01-01

Purpose: This paper aims to examine the behaviour of the Egyptian scholars while accessing electronic resources through two federated search tools. The main purpose of this article is to provide guidance for federated search tool technicians and support teams about user issues, including the need for training. Design/methodology/approach: Log…

Photonics Academy: TOPS project

NASA Astrophysics Data System (ADS)

Tyson, Nick; Barwis, Vicky; Maghuk, Faris

2009-06-01

Technicians in Opto-Electronics Project (TOP) has five targets: one, to develop and pilot train with at least 10 learners; two, to implement a marketing plan; three, to raise awareness of the sector with young people to increase new entrants into the sector; four, to engage employers in development; and five, to provide information on leadership and management.

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician (left) looks at the circuit breaker lights in the cabin. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

NASA Image and Video Library

2003-08-27

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician (left) looks at the circuit breaker lights in the cabin. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

The Potential Impact of Collaborative and Three-Dimensional Imaging Technology on SHIPMAIN Fleet Modernization Plan

DTIC Science & Technology

2008-01-01

Degree in Business Administration and was commissioned an Ensign in April of 2002 via the Inservice Procurement Program. LT Seaman reported for duty as...Florida for duty as an instructor/trainer and ran the Emergency Medical Technician training program and served as an Affiliate Faculty for the American...Heart Association’s Basic Life Support Program. Through the Inservice Procurement Program, he was commissioned as an Ensign in the Medical Service

The Potential Impact of Collaborative and Three-dimensional Imaging Technology on SHIPMAIN Fleet Modernization Plan

DTIC Science & Technology

2007-10-26

Ensign in April of 2002 via the Inservice Procurement Program. LT Seaman reported for duty as a staff hospital corpsman assigned to Naval Hospital Camp...Emergency Medical Technician training program and served as an Affiliate Faculty for the American Heart Association’s Basic Life Support Program. Through...the Inservice Procurement Program, he was commissioned as an Ensign in the Medical Service Corps in April of 2002 and completed Officer

76 FR 24028 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Function Testing Course Approval Program, 29 CFR 1910.1043 (OMB No. 0920-0138)--Extension--The National... Administration's Cotton Dust Standard, 29 CFR 1920.1043, for approving courses to train technicians to perform...

Federal lands highway phase II benchmarking study

DOT National Transportation Integrated Search

2000-11-01

In order to determine the most effective use of existing and future staff, to quantify the appropriate number of engineers and technicians required to deliver the Federal Lands Highway Program and to identify recommended management practices in proje...

Raymond Hansen | NREL

Science.gov Websites

Raymond Hansen Photo of Raymond Hansen Raymond Hansen Industrial Research Equipment Technician Pyrolysis Areas of Expertise Industrial equipment fabrication specialist Pilot plant operator/trainer Education Industrial Science Program, Red Rocks Community College, 2006-present Professional Experience

Using Wearable Computers in Shuttle Processing: A Feasibility Study

NASA Technical Reports Server (NTRS)

Centeno, Martha A.; Correa, Daisy; Groh-Hammond, Marcia

2001-01-01

Shuttle processing operations are performed following prescribed instructions compiled in a Work Authorization Document (WAD). Until very recently, WADs were printed so that they could be properly executed, including the buy off of each and every step by the appropriate authorizing agent. However, with the development of EPICs, Maximo, and PeopleSoft applications, some of these documents are now available in electronic format; hence, it is possible for technicians and engineers to access them on line and buy off the steps electronically. To take full advantage of these developments, technicians need access to such documents at the point of job execution. Body wearable computers present an opportunity to develop a WAD delivery system that enables access while preserving technician's mobility, safety levels, and quality of work done. The primary objectives of this project were to determine if body wearable computers are a feasible delivery system for WADs. More specifically, identify and recommend specific brands of body wearable computers readily available on the market. Thus, this effort has field-tested this technology in two areas of shuttle processing, and it has examined the usability of the technology. Results of two field tests and a Human Factors Usability Test are presented. Section 2 provides a description of the body wearable computer technology. Section 3 presents the test at the Space Shuttle Main Engine (SSME) Shop. Section 4 presents the results of the integration test at the Solid Rocket Boosters Assembly and Refurbishing Facility (SRBARF). Section 5 presents the results of the usability test done at the Operations Support Building (OSB).

KSC-08pd1899

NASA Image and Video Library

2008-07-02

CAPE CANAVERAL, Fla. – NYIT MOCAP (Motion Capture) team Project Manager Jon Squitieri attaches a retro reflective marker to a motion capture suit worn by a technician who will be assembling the Orion Crew Module mockup. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup. The work is being performed in United Space Alliance's Human Engineering Modeling and Performance Lab in the RLV Hangar at NASA's Kennedy Space Center. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system.

Expanding the Haitian rehabilitation workforce: employment situation and perceptions of graduates from three rehabilitation technician training programs.

PubMed

Descôteaux, Nancy; Chagnon, Valérie; Di Dong, Xin; Ellemo, Eric; Hamelin, Alessandra; Juste, Evans; Laplante, Xavier; Miron, Allison; Morency, Philippe; Samuel, Katherine; Charles, David; Hunt, Matthew

2018-05-01

This article examines the employment situation and perceptions of graduates from three rehabilitation technician (RT) programs in Haiti. In this mixed method study, 74 of 93 recent graduates completed a questionnaire, and 20 graduates participated in an in-depth qualitative interview. We analyzed survey results using descriptive statistics. We used a qualitative description approach and analyzed the interviews using constant comparative techniques. Of the 48 survey respondents who had completed their training more than six months prior to completing the questionnaire, 30 had found work in the rehabilitation sector. Most of these technicians were working in hospitals in urban settings and the patient population they treated most frequently were patients with neurological conditions. Through the interviews, we explored the participants' motivations for becoming a RT, reflections on the training program, process of finding work, current employment, and plans for the future. An analysis of qualitative and quantitative findings provides insights regarding challenges, including availability of supervision for graduated RTs and the process of seeking remunerated work. This study highlights the need for stakeholders to further engage with issues related to formal recognition of RT training, expectations for supervision of RTs, concerns for the precariousness of their employment, and uncertainty about their professional futures. Implications for Rehabilitation The availability of human resources in the rehabilitation field in Haiti has increased with the implementation of three RT training programs over the past 10 years. RTs who found work in the rehabilitation sector were more likely to work in a hospital setting, in the province where their training had taken place, to treat a diverse patient clientele, and to be employed by a non-governmental organization. The study underlines challenges related to the long-term sustainability of RT training programs, as well as the employment of their graduates. Further discussion and research are needed to identify feasible and effective mechanisms to provide supervision for RTs within the Haitian healthcare system.

Orthodontic soldering techniques: aspects of quality assurance in the dental laboratory.

PubMed

Heidemann, Jutta; Witt, Emil; Feeg, Martin; Werz, Rainer; Pieger, Klaus

2002-07-01

In Germany, the dental technician is required by the Medical Products Act (MPG) to produce workpieces of high safety and quality and to document these properties. Soldering continues to be the prevailing joining technique in the dental laboratory, although problems arise from the susceptibility to corrosion and the low strength of soldered joints. This study aimed to reveal sources of defects in dental laboratory workpieces in order to achieve optimization in terms of quality assurance. The joints were produced by various dental technicians using three different soldering techniques. These joining techniques were investigated for their quality and their corrosion properties during immersion in ferric chloride, orthodontic appliance cleanser, and artificial saliva. Observance of the soldering instructions by the dental technicians was checked. Corrosion attack was confirmed by scanning electron microscopy and by measuring the ion concentrations of copper, silver and zinc in the corrosive agents, using atomic emission spectroscopy with stimulation by inductively coupled plasma (ICP-AES analysis). Incomplete filling of the soldering gap, porosities resulting from the production process, poor corrosion properties, and in particular a high variability of the measured values point to insufficient reliability of two soldering techniques. Variations in quality were also detected among the technicians' modes of operation. The analyses confirm the need for quality assurance of soldering techniques and for increased support for alternative joining techniques such as laser welding in the future. The results of the studies on laser welding are presented in a separate publication.

Laser Machining Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as laser machining technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume…

Transforming Tech Ed: The Advanced Technological Education Community Leads in Developing and Implementing Teaching Strategies

ERIC Educational Resources Information Center

Patton, Madeline

2015-01-01

After years of working in the background to build the capacity of two-year college science, technology, engineering and math (STEM) faculty and the skills of technicians, the Advanced Technological Education (ATE) program is gaining recognition as a source of STEM workforce expertise. The ATE program's effective mentoring of STEM educators and its…

Automated Equipment Repair Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as automated equipment repair technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi…

2005 Mississippi Curriculum Framework: Secondary Heating and Air Conditioning. (Program CIP: 47.0201 - Heating, Air Conditioning, Ventilation, and Refrigeration Maintenance Technology/Technician)

ERIC Educational Resources Information Center

Green, Jacob; LeBatard, Ernest; Wiggington, Donnie; Williams, Bennett

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Advanced CNC and CAM Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and student laboratory manual for a 1-year vocational training program to prepare students for entry-level positions as advanced computer numerical control (CNC) and computer-assisted manufacturing (CAM) technicians.. The program was developed through a modification of the DACUM…

Manufacturing Technology Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment as manufacturing technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume begins…

Emergency medical personnel training: I. An historical perspective.

PubMed

Sytkowski, P A; Jacobs, L M; Meany, M

1983-01-01

The status of Emergency Medical Technicians has evolved from an undefined role with few rules, regulations, or standards to an established health care profession and a nationally administered program. The evolution of this profession received major impetus from the 1966 report by the National Academy of Science/National Research Council that provided recommended training standards. Development of a training course curriculum for basic life support (BLS) followed. The need for coordinated training of Emergency Medical Technical Technicians was recognized, and funds became available to aid in the national standardization of education, examination, certification, and recertification procedures for EMTs. Concomitant with the attempt to standardize BLS training, advanced life support (ALS) programs grew in number. By 1977 the National Standard Training Curriculum became available and was soon followed by a national certification exam. As states have the option to accept or reject the federal standards embodied in the national training course, there remains variation among programs offered by each state. Because of the difference in need for specific emergency services among the states at a time of increased professional mobility, arguments still exist regarding the desirability of federally mandated training and certification programs.

Personnel Radiation Exposure Associated With X-Rays Emanating from U.S. Coast Guard LORAN High Voltage Vacuum Tube Transmitter Units

DTIC Science & Technology

2011-07-01

dosimeter program. Unfortunately, this limited personnel monitoring program did not address the case of an individual who may have performed...and forearms; feet and ankles 18 ¾ Skin of whole body 7 ½ The USCG does maintain a small radiation personnel dosimeter monitoring program for x...ray technicians at USCG medical clinics (USCG, 2006). This medical clinic dosimeter program reflects a civilian standard of practice, where the x-ray

A Biological Safety Cabinet Certification Program: Experiences in Southeast Asia

PubMed Central

Whistler, Toni; Kaewpan, Anek; Blacksell, Stuart D.

2016-01-01

Biological safety cabinets (BSCs) are the primary means of containment used in laboratories worldwide for the safe handling of infectious microorganisms. They provide protection to the laboratory worker and the surrounding environment from pathogens. To ensure the correct functioning of BSCs, they need to be properly maintained beyond the daily care routines of the laboratory. This involves annual maintenance and certification by a qualified technician in accordance to the NSF/American National Standards Institute 49-2014 Biosafety Cabinetry: Design, Construction, Performance, and Field Certification. Service programs can be direct from the manufacturer or through third-party service companies, but in many instances, technicians are not accredited by international bodies, and these services are expensive. This means that a large number of BSCs may not be operating in a safe manner. In this article, we discuss our approach to addressing the lack of trained and qualified personnel in Thailand who can install, maintain, and certify BSCs in a cost-effective and practical manner. We initiated a program to create both local and regional capacity for repair, maintenance, and certification of BSCs and share our experiences with the reader. PMID:27721674

Dental laboratory technology education in China: current situation and challenges.

PubMed

Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang

2013-03-01

Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.

Technician and technologist photonics teaching: an Ontario success story

NASA Astrophysics Data System (ADS)

Yatulis, Jay; Beda, Johann; Casey, Peter J.; Chebbi, Brahim; Finnagan, Steve; Grevatt, Treena; McGlashan, Alexander; Nantel, Marc; Tiberi, Leo

2004-10-01

Launched in 2001, the Ontario Photonics Education and Training project (PET) has established an completely new Photonics Engineering Technician (2 years) and Photonics Engineering Technologist (3 years) programs at Niagara and Algonquin Colleges. The programs have now completed a full academic cycle at both colleges. This paper will review the history of the program, its collaborators, and industry climate changes. This paper will present recruitment statistics, which will include percentage uptake, student retention, and profiles of the student group. The first year"s intake was characterized by high achieving 'early adopters', including those with non-technical backgrounds and University converts. Lessons learned from recruitment and high school outreach activities will be discussed. We observe that 'photonics' is not a term recognized by the populace at large. An improved public understanding of the pervasive nature of electro-optic technologies in everyday life is desired. Curriculum highlights, recommendations; and the evolution of our facilities will be discussed. We will review employment and destination statistics of our graduates. Challenges for the future will be addressed, including the need for greater program visibility amongst regional photonics employers. In summary, the PET program has created an optics specialist with a practical skill-set that will fill the expertise gap that exists in traditional and non-traditional consumers of optical technologies.

Integrated Circuits/Segregated Labor: Women in Three Computer-Related Occupations. Project Report No. 84-A27.

ERIC Educational Resources Information Center

Strober, Myra H.; Arnold, Carolyn L.

This discussion of the impact of new computer occupations on women's employment patterns is divided into four major sections. The first section describes the six computer-related occupations to be analyzed: (1) engineers; (2) computer scientists and systems analysts; (3) programmers; (4) electronic technicians; (5) computer operators; and (6) data…

Artificial Intelligence Technology for the Maintainer's Associate. Final Report for the Period October 1983 to December 1985.

ERIC Educational Resources Information Center

Richardson, J. Jeffrey; And Others

In keeping with current Department of Defense policies on integrated diagnostics and a reduced reliance on paper-based documentation, the concept of a portable, expert-system-based job aid and training device was proposed to assist inexperienced electronics maintenance technicians in learning to maintain sophisticated equipment. A prototype was…

Money and Morale

ERIC Educational Resources Information Center

Meyers, Richard S.

1970-01-01

What do you do as a media specialist to raise the salary level of your IMC Technicians (as defined in Standards for School Media Program") when you feel that they are being underpaid?" The problems involved are considered, and some suggestions are provided. (Author/LS)

Overcoming Barriers for "Niche" Learners Through Distance Education.

ERIC Educational Resources Information Center

Miller, Lawrence G.; Hyatt, Sue Y.; Brennan, Joyce; Bertani, Raymond; Trevor, Thomas

1999-01-01

Focuses on students who fit into "niches," and discusses how the Chattanooga State Technical Community College's distance-learning program accommodates these learners. Describes five "niche" learner categories: students with disabilities, power-line maintenance technicians, emergency-service personnel, truckers, and industrial…

Training programs in remote sensing for professionals, students and the general public

NASA Technical Reports Server (NTRS)

Galeano, R.

1987-01-01

What remote sensing is, how and why it is used, and why more people should be trained in the field is discussed. Suggestions are offered concerning differences in teaching technicians, the general public, and children in schools.

Library-Information Education in Algeria.

ERIC Educational Resources Information Center

Boumarafi, B. B.; Haythornthwaite, J.

1988-01-01

Reviews the development of educational programs for library technicians, librarians, and information professionals in Algeria and describes the current educational structure. Topics discussed include the need for improvements in curriculum development, teaching staff development, library facilities, and the use of information technologies. (CLB)

Technician Program Uses Advanced Instruments.

ERIC Educational Resources Information Center

Stinson, Stephen

1981-01-01

Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

Changing Priorities

ERIC Educational Resources Information Center

Wimberly, Charles A.; Wynne, Lewis N.

1974-01-01

The future of many post-secondary institutions may rest with their ability to shift from a strict engineering format to one incorporating community service programs. Retraining competent unemployed technicians and engineers from aerospace and military sectors for construction, community service, and environmental protection can be an important…

Nuclear Power Plant Technician

ERIC Educational Resources Information Center

Randall, George A.

1975-01-01

The author recognizes a body of basic knowledge in nuclear power plant technoogy that can be taught in school programs, and lists the various courses, aiming to fill the anticipated need for nuclear-trained manpower--persons holding an associate degree in engineering technology. (Author/BP)

Plastics Technical Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is intended to assist individuals responsible for developing tech prep programs, lists the occupational, academic, and employability competencies that representatives from education, business/industry, and labor throughout Ohio have identified as being necessary for employment in technician-level positions involving the…

Uneasiness among laboratory technicians.

PubMed

Arluke, A

1999-01-01

Four aspects of animal experimentation cause uneasiness among many animal laboratory technicians. First, if technicians form strong attachments to lab animals, they feel conflict between their nurturing and the experimental manipulations they perform. Most technicians learn to curtail these attachments. Second, the "sacrifice" of lab animals becomes routinized and stripped of special meaning for many technicians, making killing uncomfortably rote. Third, technicians sometimes encounter outsiders who are critical of animal experimentation and ridicule the technicians for doing this work. Most technicians avoid telling outsiders about their work or take an educational approach to deal with these awkward encounters. Finally, most technicians report some ethical uneasiness about certain types of experiments and their clinical value, as well as about the use of certain animals, and they feel they cannot turn to investigators or fellow technicians to pursue such issues.

Computer Programs For Automated Welding System

NASA Technical Reports Server (NTRS)

Agapakis, John E.

1993-01-01

Computer programs developed for use in controlling automated welding system described in MFS-28578. Together with control computer, computer input and output devices and control sensors and actuators, provide flexible capability for planning and implementation of schemes for automated welding of specific workpieces. Developed according to macro- and task-level programming schemes, which increases productivity and consistency by reducing amount of "teaching" of system by technician. System provides for three-dimensional mathematical modeling of workpieces, work cells, robots, and positioners.

KSC-03pd3258

NASA Image and Video Library

2003-12-19

KENNEDY SPACE CENTER, FLA. -- A United Space Alliance (USA) technician (left) discusses the construction of a thermal blanket used in the Shuttle's thermal protection system with USA Vice President and Space Shuttle Program Manager Howard DeCastro (right). NASA and USA Space Shuttle program management are participating in a leadership workday. The day is intended to provide management with an in-depth, hands-on look at Shuttle processing activities at KSC.

Mending Time.

ERIC Educational Resources Information Center

Flanagan, Joseph

1998-01-01

Hispanic and Native-American seasonal Park Service employees in the Southwest are training younger local workers in masonry preservation in a National Park Service effort to establish a ruins preservation program. These new technicians will also learn to document, photograph, and report on preservation activities and follow legal administrative…

Essentials of an Accredited Curriculum for Optometric Technicians.

ERIC Educational Resources Information Center

American Optometric Association, St. Louis, MO.

The standards are intended for the information of schools, optometrists, clinics, and prospective students. They concern organization and administration, faculty, student selection, curriculum, and accreditation policies. The general academic program should include English, social and behavioral science, mathematics, history, and office skills.…

Guidelines for Theatre Safety.

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Div. of Curriculum Development.

Prepared to help school administrators and theatre arts teachers establish and maintain a safe environment for the actors, technicians, and audience members who participate in educational theatre programs, this guide is divided into two major sections. The first section presents administrative guidelines covering recommended procedures, teacher…

The DuPont Conference: Implications for the Chemical Technology Curriculum

NASA Astrophysics Data System (ADS)

Kenkel, John; Rutledge, Sue; Kelter, Paul B.

1998-05-01

Southeast Community College (SCC) hosted the first DuPont Conference for Chemical Technology Education at its Lincoln, Nebraska campus October 4-6, 1997. The conference brought together fourteen practicing chemists and chemistry technicians and five college and university faculty members for the express purpose of suggesting new laboratory activities that would help relate the real world of work to the education of chemical laboratory technicians in community colleges. Participants included seven men and seven women from DuPont, Procter & Gamble, Eastman Chemical, Eastman Kodak, Dow Chemical, Air Products and Chemicals, Monsanto, Union Carbide, the Nebraska Agriculture Laboratory, and the University of Nebraska Biological Process Development Facility, Department of Food Science. The conference, sponsored by the E. I. DuPont DeNemours & Company through a grant awarded to SCC in June 1997, was intended to help further the goals of the two major projects underway at SCC, funded by the National Science Foundation's Advanced Technological Education Program. These projects, dubbed "Assignment: Chemical Technology I and II", or ACT-I and ACT-II, are curriculum and materials development projects. The invited scientists had between 2 and 32 years of experience that ranged from bench work to management levels. Many are or have been active on the national scene as members and officers of the American Chemical Society's Division of Chemical Technicians and the ACS Committee on Technician Activities.

National Manpower Inventory. Volume 3. Technical Documentation for Software for the Model

DTIC Science & Technology

1985-09-01

Technician APS-96 Search Radar IMA Technician USM-449 (V) & AAI 5500 Series ATE Int Maintenance Level Tech. CO CP-413/ASA-27A SACE TesI Bench IMA...MATE) Test Console IMA Technician ALQ-91/108 DECM IMA Technician ALQ-99 ECM Jammer/Tmilter & ALM-107 TesI Console IMA Technician ALQ-99 ECM Track...Receivers & ALM-109 TesI Console IMA Technician ECM Systems Intermediate Maintenance Technician ASM-347 (GT-1) SACE Programmer/Mainlenanca IMA

Safety and Quality Training Simulator

NASA Technical Reports Server (NTRS)

Scobby, Pete T.

2009-01-01

A portable system of electromechanical and electronic hardware and documentation has been developed as an automated means of instructing technicians in matters of safety and quality. The system enables elimination of most of the administrative tasks associated with traditional training. Customized, performance-based, hands-on training with integral testing is substituted for the traditional instructional approach of passive attendance in class followed by written examination.

Electronics Technician 3

DTIC Science & Technology

1957-01-01

REPLACEMENT REPORT DD-787 REPORT BUSHIPS 10550-1 I DESIGNATIoN OF SHIP OR STATION i3 TYPE OF REPORT ICHECK ONE 1 TIME FAIL. OCCURRED OR MAINT E6Z3AN MONT...AY 20cm~co 01ME .ASSIARLY MONTH DAY YEAR T, M 2M VINT ’" 6. MODEL TYPE DESIGNATION S. FIRST INDOCAFTION OF TROUBLE ICHECK ONEI I0 OPERATIONAL II

Forensic Science Technician

ERIC Educational Resources Information Center

Tech Directions, 2010

2010-01-01

Forensic science technicians, also called crime laboratory technicians or police science technicians, help solve crimes. They examine and identify physical evidence to reconstruct a crime scene. This article discusses everything students need to know about careers for forensic science technicians--wages, responsibilities, skills needed, career…

Re-inventing the fiber-optic textbook: a proposal

NASA Astrophysics Data System (ADS)

Hecht, Jeff; Hecht, Deborah; Chowdary, Ahsan; Massa, Nicholas

2016-09-01

It's time to reinvent the textbook to meet the needs of today's students, educators, and self-study readers. Students aren't buying them, and authors and publishers have slowed or stopped revising them keep up with new technology and new pedagogy. We want to demonstrate new possibilities by completely overhauling Understanding Fiber Optics, an introduction to fiber optics originally written by J.H. for self-study and later republished as a textbook for technician training. After five editions that sold over 100,000 copies, its page count nearly doubled and its price soared more than tenfold from its original $16.95. We envision a modular structure to meet the needs of students and instructors. Basic concepts will be covered at an introductory level in a "core book" of some 200-250 pages, suitable for self-study, STEM programs at the high school level, and technician training. Additional separate modules primarily intended for instructors will cover details, such as how to install connectors. All materials will be distributed electronically at low cost, and will include interactive demonstrations, animations, simulations, and audio and video supplements explaining key concepts. Our goal is to keep the best aspects of a well-written and well-illustrated textbook, take advantage of new tools for presenting material to students, and make the whole package readily accessible and affordable to students, instructors, and anyone else wanting a working knowledge of fiber optics. We are developing a proposal to achieve these goals, and looking for partners to help us develop, test and evaluate instructional materials.

Final Report: Northern Virginia Community College Training for Biotechnology Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, Johanna V

The intent of this project was to expand Northern Virginia Community College's capability to offer training to support the Biotechnology Industry in the northern Virginia region. The general goal of this project was to create a College Biotechnology Program; specific goals of the project were to a) design curricula/courses to prepare students to become entry-level lab technicians, b) redesign and equip lab space to better suit the needs of the program, c) develop partnerships with the local industry through outreach and the formation on an advisory board, d) recruit students into the program, and e) provide instructional support for localmore » high school teachers. At the end of the grant period, NOVA has successfully created two new curricula in biotechnology: an Associate of Applied Science (A.A.S.) in Biotechnology (initiated in Fall 2008) and a Career Studies Certificate for Biotechnology Lab Technicians (to be initiated in Fall 2010). These curricula were designed with advice from an external advisory committee which is comprised of representatives from industry, transfer institutions and high school administrators. To date, almost all courses have been designed and piloted; the equipment needed for the courses and the initial supplies were paid for by the grant as was the re-modeling of some lab space to be used for the biotech courses. In order to market the program, the NOVA Biotech Program has also established relationships with the local high schools. Presentations were given at several local high schools and on-site workshops were held for high school students and teachers. As a result, close to 1000 students have attended program open houses, presentations within the high schools, or workshops held in the summer. Over 100 teachers have received information and/or training in biotechnology. These outreach efforts as well as high quality curricula have started to attract a number of students to the program – for example, there are currently 70 students enrolled in the A.A.S. program. The first students in the biotech program are expected to graduate in Spring 2011; already, students enrolled in the biotech program/courses have obtained jobs or internships in several local companies. Our current goal continues to be to foster the formation of a regional biotech education pipeline into the local industry which includes the recruitment of individuals into the NOVA Biotech Program, the training and graduation of highly-skilled lab technicians, and the placement of graduates in local biotech industry jobs.« less

From Classroom to Computer Terminal.

ERIC Educational Resources Information Center

Bumstead, Richard

1981-01-01

Describes a Massachusetts pilot project which matches the state's need for trained technicians with the needs of teachers laid off or dismissed. The computer programer training course and job placement service illustrate a school-business partnership that eases the transition for teachers forced to change careers. (SK)

Editorial comment on Malkin and Keane (2010).

PubMed

Voigt, Herbert F; Krishnan, Shankar M

2010-07-01

Malkin and Keane (Med Biol Eng Comput, 2010) take an innovative approach to determine if unused, broken medical and laboratory equipment could be repaired by volunteers with limited resources. Their positive results led them to suggest that resource-poor countries might benefit from an on-the-job educational program for local high school graduates. The program would train biomedical technician assistants (BTAs) who would repair medical devices and instrumentation and return them to service. This is a program worth pursuing in resource-poor countries.

47 CFR 97.9 - Operator license grant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... grants are: Novice, Technician, Technician Plus (until such licenses expire, a Technical Class license granted before February 14, 1991, is considered a Technician Plus Class license), General, Advanced, and... grant. (b) The person named in an operator license grant of Novice, Technician, Technician Plus, General...

A System Approach to Navy Medical Education and Training. Appendix 15. Biotronics Technicians.

DTIC Science & Technology

1974-08-31

curricula based upon job analysis was implemented to a level of methodology determination. These methods and curriculum materials constituted a third...Therapy Technician 8495 Dermatology Technician 8496 Embalming Technician 8497 Medical Illustration Technician 8498 Medical Equipment Repair Technician... WET COMPRESSES/SOAKS/PACKS 24 ICONTROL BLEEDING BY PRESSURE DRESSING 25 1APPLY/CHANGE BANDAGES, E.G. ROLLER, TRIANGULAR, KURLEX GO TO RIGHT HAND PAGE

Collection Conservation Treatment: A Resource Manual for Program Development and Conservation Technician Training, Including "Report on Training the Trainers: A Conference on Training in Collection Conservation, Berkeley, California, April 28-May 2, 1992."

ERIC Educational Resources Information Center

Jones, Maralyn, Comp.

The documentation of collection conservation treatments and program management information compiled in this publication are the result of the "Training the Trainers" conference in April 1992 at the University of California, Berkeley. Only treatments appropriate for general, usually circulating, collections have been included, emphasizing…

Curriculum Change Part 2a. Programme Development in Colleges. Part 2a: The Work Activities of Teachers on TEC Certificate Programmes.

ERIC Educational Resources Information Center

Dodd, S.; And Others

A study examined the day-to-day work activities of teachers of Technician Education Council (TEC) certificate programs in Great Britain. During the study, a detailed questionnaire dealing with the tasks performed by TEC teachers, the amount of time spent on TEC teachers on individual activities, and the impact of the TEC programs on teacher…

Characteristics and Pay of Federal Civilian Employees

DTIC Science & Technology

2007-03-01

of Federal Civilian Employees 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...dental assistants , safety technicians, photographers, cartographic tech- nicians, and food inspectors. In December 2005, about 370,000 employees ...promotion program . CHARACTERISTICS AND PAY OF FEDERAL CIVILIAN EMPLOYEES 11pay. Sixty percent of them also switch to a different occu- pation when they

NACA Apprentice is Trained on the Lab's Altitude Systems

NASA Image and Video Library

1955-02-21

An apprentice at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory shown training on the altitude supply air systems in the Engine Research Building. An ongoing four-year apprentice program was established at the laboratory in 1949 to facilitate the close interaction of the lab’s engineers, mechanics, technicians, and scientists. The apprentice school covered a variety of trades including aircraft mechanic, electronics instrumentation, machinist, and altitude systems mechanic, seen in this photograph. The apprentices rotated through the various shops and facilities to provide them with a well-rounded understanding of the work at the lab. The specialized skills required meant that NACA apprentices were held to a higher standard than those in industry. They had to pass written civil service exams before entering the program. Previous experience with mechanical model airplanes, radio transmission, six months of work experience, or one year of trade school was required. The Lewis program was certified by both the Department of Labor and the State of Ohio. One hundred fifty of the 2,000 hours of annual training were spent in the classroom. The remainder was devoted to study of models and hands-on work in the facilities. Examinations were coupled with evaluation by supervisors in the shops. The apprentices were promoted through a series of grades until they reached journeyman status. Those who excelled in the Apprentice Program would be considered for a separate five-year engineering draftsman program.

24 CFR 291.530 - Eligible firefighter/emergency medical technicians.

Code of Federal Regulations, 2010 CFR

2010-04-01

... medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing... medical technicians. A person qualifies as a firefighter/emergency medical technician for the purposes of... technician by a fire department or emergency medical services responder unit of the federal government, a...

5 CFR 315.610 - Noncompetitive appointment of certain National Guard technicians.

Code of Federal Regulations, 2010 CFR

2010-01-01

... National Guard technicians. 315.610 Section 315.610 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... technicians. (a) An agency may appoint noncompetitively a National Guard technician who— (1) Was involuntarily... 3 years as a technician; (3) Meets the qualifications requirements of the job: and (4) Is appointed...

Current status, crisis and trends in Chinese dental technicians.

PubMed

Chaoyi, Ma; Liwei, Zheng; Li, Yue; Min, Zhou; Haiyang, Yu

2012-04-01

Chinese dental technicians play a significant role in the globalised market of dental prosthesis fabrication, but this subject has not been investigated in detail. The demand for dental prostheses increases as individuals pay increasing attention to their oral health. Therefore, it is important to investigate the status of Chinese dental technicians. To evaluate the current status of Chinese dental technicians. Dental technicians' resumés, which reveal information regarding dental technician manpower, degrees, working age and salary, etc., were analysed and compared with those abroad. We also estimated the future demands of dental technician manpower, and discussed some potential solutions. There are fewer dental technicians in China than in other developed countries; they are also of a lower standard. Male technicians outnumber females. The education level of technicians is insufficient, and the education programme is still in its exploratory stage. The development of dental technician teams in China represents both an opportunity and a challenge. It is important to move forward from the current situation to yield long-term development. This article provides information on the Chinese dental technology industry, identifies the problems and offers solutions for its development. © 2012 FDI World Dental Federation.

Taking Care of the Small Computer: A Guide for Librarians.

ERIC Educational Resources Information Center

Williams, Gene

1986-01-01

Describes how to identify microcomputer problems and determine whether the services of a technician are required by troubleshooting, or using a process of elimination, without needing a technical background or special tools. Prevention methods and the use of diagnostic programs are also explained. (EM)

Workplace Trends In HVAC/R

ERIC Educational Resources Information Center

Strang, Lynn; Todd, CeCe

2013-01-01

This article presents trends in the heating, ventilation, air conditioning and refrigeration (HVAC/R) industry, with an emphasis on the importance of technician training programs as exemplified at the East Valley Institute of Technology (EVIT) in Mesa, Arizona. The article states that HVAC workers are increasingly helping their consumers "go…

29 CFR 519.12 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or university, a junior college, or a professional school of engineering, law, library science... credit toward such a degree or offers a two-year program in engineering, mathematics, or the physical or biological sciences which is designed to prepare the student to work as a technician and at a semi...

Energy Manpower Study, 1980.

ERIC Educational Resources Information Center

Seward County Community Coll., Liberal, KS.

A study was conducted in Kansas to determine the need for vocational education programs in solar energy technology in community colleges. After a literature search revealed a project need for trained solar energy technicians, Seward County Community College surveyed 100 Kansas heating, air conditioning, and plumbing companies to determine future…

76 FR 13205 - Piedmont National Wildlife Refuge, Jones and Jasper Counties, GA; Final Comprehensive...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

..., reptiles and amphibians. We will initiate basic inventories for fish species and invertebrates, including... maintain current fire management programs but intensify management of a 5,000-acre Piedmont savanna focus... (law enforcement), refuge operations specialist, prescribed fire/fuels technician, engineering...

Project BIOTECH: Use of Modules in Technician Training

ERIC Educational Resources Information Center

Glazer, Richard B.

1974-01-01

Describes Project Biotech, a program that utilizes the audio-tutorial principle to develop skill-oriented modules. The modules are self-pacing, independent units of instruction which concentrate on a few well-defined objectives and allow the student to learn at his own rate with minimal supervision. (PB)

Technician Consistency in Specular Microscopy Measurements: A "Real-World" Retrospective Analysis of a United States Eye Bank.

PubMed

Rand, Gabriel M; Kwon, Ji Won; Gore, Patrick K; McCartney, Mitchell D; Chuck, Roy S

2017-10-01

To quantify consistency of endothelial cell density (ECD) measurements among technicians in a single US eye bank operating under typical operating conditions. In this retrospective analysis of 51 microscopy technicians using a semiautomated counting method on 35,067 eyes from July 2007 to May 2015, technician- and date-related marginal ECD effects were calculated using linear regression models. ECD variance was correlated with the number of specular microscopy technicians. Technician mean ECDs ranged from 2386 ± 431 to 3005 ± 560 cells/mm. Nine technicians had statistically and clinically significant marginal effects. Annual mean ECDs adjusted for changes in technicians ranged from 2422 ± 433 to 2644 ± 430 cells/mm. The period of 2007 to 2009 had statistically and clinically significant marginal effects. There was a nonstatistically significant association between the number of technicians and ECD standard deviation. There was significant ECD variability associated with specular microscopy technicians and with the date of measurement. We recommend that eye banks collect data related to laboratory factors that have been shown to influence ECD variability.

Government, Including: Air Traffic Controllers, Aviation Safety Inspectors, Airspace Systems Inspection Pilots, Accident Investigators, Electronics Technicians, Engineers, Meteorologists. Aviation Careers Series. Revised.

ERIC Educational Resources Information Center

Zaharevitz, Walter

This booklet, one in a series on aviation careers, outlines the variety of careers in aviation available in federal, state, and local governmental agencies. The first part of the booklet provides general information about civil aviation careers with the federal government, including pay scales, job classifications, and working conditions.…

A DIY Ultrasonic Signal Generator for Sound Experiments

NASA Astrophysics Data System (ADS)

Riad, Ihab F.

2018-02-01

Many physics departments around the world have electronic and mechanical workshops attached to them that can help build experimental setups and instruments for research and the training of undergraduate students. The workshops are usually run by experienced technicians and equipped with expensive lathing, computer numerical control (CNC) machines, electric measuring instruments, and several other essential tools. However, in developing countries such as Sudan, the lack of qualified technicians and adequately equipped workshops hampers efforts by these departments to supplement their laboratories with the equipment they need. The only other option is to buy the needed equipment from specialized manufacturers. The latter option is not feasible for the departments in developing countries where funding for education and research is scarce and very limited and as equipment from these manufacturers is typically too expensive. These departments struggle significantly in equipping undergraduate teaching laboratories, and here we propose one way to address this.

47 CFR 97.201 - Auxiliary station.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Technician, Technician Plus, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, Technician Plus, General, Advanced or Amateur Extra Class operator...

Middle-Skilled Workforce Needs in a Changing Oil and Gas Industry: the Role of Flexibility. As the Oil Industry continues to shed jobs due to the global downturn in oil prices, one of the most vulnerable sectors to job loss are the middle-skilled workers such as the technicians and drill operators. We present options and ideas to mitigate the problem.

NASA Astrophysics Data System (ADS)

Waddell, K.

2015-12-01

Middle-skilled workers are those whose jobs require considerable skill but not an advanced degree. Nationwide, one-third of the projected job growth for 2010-2020 will require middle-skilled workers. The educational paths to these jobs include career and technical education (CTE), certificates and associate's degrees from community colleges, apprenticeship programs, and training provided by employers. In the oil industry, the demand is expected to about 150,000 jobs. In environmental restoration and monitoring, there will be a need for at least 15,000 middle-skilled workers. Examples of the types of jobs include geological and petroleum technicians, derrick and drill operators, and pump system and refinery operators for the oil and gas sector. For the environmental restoration and monitoring sector, the types of jobs include environmental science technicians, and forest (and coastal) conservation technicians and workers. However, all of these numbers will be influenced by the growth and contraction of the regional or national economy that is not uncommon in the private sector. Over the past year, for example, the oil and gas industry has shed approximately 75,000 jobs (out of a workforce of 600,000) here in the United States, due almost exclusively to the drop of oil prices globally. A disproportionate number of the lost jobs were among the middle-skilled workforce. Meanwhile, the recent settlements stemming from the Deepwater Horizon oil spill are expected to create a surge of environmental restoration activity in the Gulf of Mexico region that has the potential to create thousands of new jobs over the next decade and beyond. Consequently, there is a need to develop education, training and apprenticeship programs that will help develop flexibility and complementary skill sets among middle-skilled workers that could help reduce the impacts of economic downturns and meet the needs of newly expanding sectors such as the environmental restoration field. This presentation will discuss the programs, activities, and frameworks needed to build this capacity in the middle-skilled workforce over the coming years.

Dental Laboratory Technology. Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Sappe', Hoyt; Smith, Debra S.

This report provides results of Phase I of a project that researched the occupational area of dental laboratory technology, established appropriate committees, and conducted task verification. These results are intended to guide development of a program designed to train dental laboratory technicians. Section 1 contains general information:…

Rotational Molding Process Technician. Instructional Program Package.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

This curriculum package contains materials developed through a partnership of the Association of Rotational Molders, El Paso Community College (Texas), and the College of DuPage (Illinois). The materials, which were developed during a 2-day DACUM (Developing a Curriculum) process, are based on national skill standards and designed for…

A RESEARCH STUDY OF AGRICULTURAL TECHNICIANS.

ERIC Educational Resources Information Center

JENSEN, BRUCE F.

QUESTIONNAIRES WERE MAILED TO 297 BUSINESS FIRMS TO DETERMINE THE CHARACTER OF THE WORK FORCE, THE TURNOVER OR OPENINGS ANNUALLY, THE JOB QUALIFICATIONS REQUIRED TO FILL THE JOBS, AND THE TRAINING PROGRAMS NEEDED TO PREPARE STUDENTS FOR THE OCCUPATIONS IN AGRICULTURAL BUSINESSES, GOVERNMENTAL AGENCIES, AND FARMS IN THE COLLEGE OF THE SEQUOIAS…

Education and Training in New and Renewable Sources of Energy.

ERIC Educational Resources Information Center

Beresovski, T.; And Others

1981-01-01

Identifies past and present efforts and future directions for UNESCO activities related to energy but focusing on alternative energy sources. Reports results of an international survey and analysis of programs, facilities, and needs in alternative energy education and training. Outlines curricula for policymakers, specialists, and technicians. (DC)

Directory of Credit-Granting Policies in Medical Laboratory Education.

ERIC Educational Resources Information Center

National Committee for Careers in Medical Technology, Bethesda, MD.

Ways now exist for medical laboratory workers to advance up the educational career ladder, gaining credit for prior training and/or experience. A total of 369 Certified Medical Laboratory Assistant Schools, colleges with Associate Degree Medical Laboratory Technicians programs, schools of Medical Technology, and colleges with baccalaureate Medical…

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME I.

ERIC Educational Resources Information Center

PEARCE, C.A.; AND OTHERS

GROUPS OF TECHNICAL OCCUPATIONS ARE COMPARED IN TERMS OF CHARACTERISTICS OF EMPLOYMENT, SOURCE OF WORKERS, AND EDUCATIONAL AND EXPERIENCE REQUIREMENTS. SURVEY FINDINGS ARE GIVEN FOR EMPLOYER TRAINING PROGRAMS AND EMPLOYER VIEWS AND POLICIES ON THE UTILIZATION OF TECHNICIANS. THE SURVEY DATA WERE DERIVED FROM A SAMPLE OF 17,414 ESTABLISHMENTS…

Safety in Numbers

ERIC Educational Resources Information Center

Pierce, Dennis

2017-01-01

Many people are not aware of how significant a role two-year institutions play in training emergency first responders. Community colleges play a key role in training the nation's police officers and other public safety employees, such as firefighters and emergency medical technicians (EMTs). The demand for these programs is high. There is a…

Education as a Moderator of Goal Setting Effectiveness

ERIC Educational Resources Information Center

Ivancevich, John M.; McMahon, J. Timothy

1977-01-01

Skilled technicians (N=128) working under an assigned goal setting program were studied to learn about the moderating impact of education on relationships between performance and six goal setting properties. Speculation is advanced as to why education is an important moderator variable for specific types of goal setting properties. (Author)

Open Learning for Process Operators. ZIFF Papiere 78.

ERIC Educational Resources Information Center

Geary, David

This document describes the development and implementation of an open learning course for shift operators who work in British process industries. The course was developed collaboratively during 1979-82 by B.P. Chemicals Ltd. and Grimsby College of Technology and Arts, using the Business and Technician Education Council certification program.…

Southern California Area Environmental Manpower and Training Needs Study.

ERIC Educational Resources Information Center

Kowalski, James A.

A survey was conducted to identify environmentally related jobs, the current employment need in these areas, the 5-year projection, and the current status of educational training programs to meet the employment needs for technicians or paraprofessionals within a five-county area of Southern California. The environmentally related occupations…

Civil Engineering Technology Needs Assessment.

ERIC Educational Resources Information Center

Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

CIVIL ENGINEERING TECHNOLOGY CONSULTANTS' WORKSHOP, REPORT OF PROCEEDINGS (ATLANTA, MAY 17-20, 1967).

ERIC Educational Resources Information Center

DOBROVOLNY, JERRY S.

THIS REPORT ATTEMPTS TO SHOW ADMINISTRATORS OF JUNIOR COLLEGES, TECHNICAL INSTITUTES, AND GOVERNMENT OR INDUSTRIAL TRAINING PROGRAMS CERTAIN CRITICAL PROBLEMS IN THE TRAINING OF CIVIL ENGINEERING TECHNICIANS. THE PHILOSOPHY OF TECHNICAL EDUCATION REQUIRES ATTENTION AS DOES THE IDENTIFICATION OF STUDENTS WHO CAN BENEFIT FROM AND SUCCESSFULLY…

Media Center: Operations Handbook.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

This guide to basic technical procedures recommended in the operation of within-school media centers is intended for all Department of Defense Dependent Schools (DoDDS) media specialists, clerks, aides, and technicians. The first four sections refer to the general media program functions identified in the related manual, "A is for Apple:…

Unified Technical Concepts. Application Modules Volume II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the second of two volumes, consists of 45 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force…

Careers in Airway Science.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC.

The Federal Aviation Administration (FAA) has initiated the Airway Science curriculum as a method of preparing the next generation of aviation technicians and managers. This document: (1) discusses the FAA's role in the Airway Science program; (2) describes some of the career fields that FAA offers to Airway Science graduates (air traffic control…

Trends in U.S. Engineering and Engineering Technology: A Comparative Study of Admissions, Curricula, and Employment.

ERIC Educational Resources Information Center

Lebold, W. K.; Lebold, D. J.

1985-01-01

Discusses the admissions selection practices, educational programs, quality standards, and employment characteristics of engineering and engineering technology in the United States. The importance of these two occupations as part of technical teams (which include scientists and technicians) is documented and stressed. (JN)

Instrumentation Technology. Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Sappe', Hoyt; Squires, Sheila S.

This report provides results of Phase I of a project that researched the occupational area of instrumentation technology, established appropriate committees, and conducted task verification. These results are intended to guide development of a program designed to train instrumentation technicians. Section 1 contains general information: purpose of…

Practical Materials for Teaching. Resource File: Edition I. Energy Management.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC.

This directory lists energy education programs directed at increasing the energy conservation awareness of scientists, engineers, managers, and technicians working in fields where they are responsible for managing energy consumption. The resource is prepared to help with the process of identifying, selecting, and obtaining materials for promoting…

SIX DECADES OF SERVICE, 1903-1963.

ERIC Educational Resources Information Center

Milwaukee School of Engineering, WI.

OSCAR WERWATH ARRIVED IN MILWAUKEE FROM GERMANY IN 1903 AND FOUNDED A SCHOOL TO MAKE SKILLED MECHANICS, TECHNICIANS, AND ENGINEERS OF THE UNSKILLED AND THE APPRENTICED. BY 1908, THE SCHOOL OFFERED TWO FULL-TIME TWO-SEMESTER COURSES IN ELECTRICAL AND MECHANICAL AREAS IN ADDITION TO EVENING PROGRAMS. COOPERATIVE ENGINEERING EDUCATION, INTRODUCED IN…

TECHNOLOGICAL CHANGE IN THE GOVERNMENT ENTERPRISE, RETRAINING IN THE FEDERAL SERVICE.

ERIC Educational Resources Information Center

HOOS, IDA R.

TO COUNTERACT BUREAUCRATIC STAGNATION, ENCOURAGE SELF-DEVELOPMENT, AND USE WORKERS EFFECTIVELY, SINCE 1957 THE CIVIL SERVICE COMMISSION HAS EMPHASIZED CONTINUING EDUCATION. CASE STUDIES OF THE INSTRUMENT TECHNICIAN TRAINING PROGRAM AT ALAMEDA NAVAL AIR STATION AND MCCLELLAN AIR FORCE BASE AND THE INTERNAL REVENUE SERVICE AUTOMATED DATA PROCESSING…

The Use of Tailored Testing with Instructional Programs. Final Report.

ERIC Educational Resources Information Center

Reckase, Mark D.

A computerized testing system was implemented in conjunction with the Radar Technician Training Course at the Naval Training Center, Great Lakes, Illinois. The feasibility of the system and students' attitudes toward it were examined. The system, a multilevel, microprocessor-based computer network, administered tests in a sequential, fixed length…

Saturn Apollo Program

NASA Image and Video Library

1964-03-03

Two technicians apply insulation to the outer surface of the S-II second stage booster for the Saturn V moon rocket. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

Saturn Apollo Program

NASA Image and Video Library

1960-01-01

A NASA technician is dwarfed by the gigantic Third Stage (S-IVB) as it rests on supports in a facility at KSC. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

From School Militarization to School Securitization: National Security Finds Its Place in Schools

ERIC Educational Resources Information Center

Nguyen, Nicole

2017-01-01

This ethnography explores daily life at Milton High School, a US public school with its own specialized Homeland Security program. From "military grunts" serving in distant theaters of war to Transportation Security Administration (TSA) agents defending the US borderlands to National Security Administration (NSA) technicians monitoring…

Industry Takes the Initiative.

ERIC Educational Resources Information Center

VocEd, 1983

1983-01-01

The Blackhawk automotive division of Applied Power, Inc. has pioneered a comprehensive nationwide program to train vocational instructors in the new science of unibody auto repair. By training the teachers of auto body technicians, the company increases the value of its equipment while making a contribution to the quality of vocational education.…

Validation of Testing for a Multi-Disciplinary Technical Position.

ERIC Educational Resources Information Center

Sheppard, Valarie

This paper describes a testing program that established job-related standards of performance and testing procedures for the technician position within a gas transportation company. New standards were being established in response to safety concerns stemming from investigations that identified training inadequacy as a cause of accidents. The job…

Telepharmacy and bar-code technology in an i.v. chemotherapy admixture area.

PubMed

O'Neal, Brian C; Worden, John C; Couldry, Rick J

2009-07-01

A program using telepharmacy and bar-code technology to increase the presence of the pharmacist at a critical risk point during chemotherapy preparation is described. Telepharmacy hardware and software were acquired, and an inspection camera was placed in a biological safety cabinet to allow the pharmacy technician to take digital photographs at various stages of the chemotherapy preparation process. Once the pharmacist checks the medication vials' agreement with the work label, the technician takes the product into the biological safety cabinet, where the appropriate patient is selected from the pending work list, a queue of patient orders sent from the pharmacy information system. The technician then scans the bar code on the vial. Assuming the bar code matches, the technician photographs the work label, vials, diluents and fluids to be used, and the syringe (before injecting the contents into the bag) along with the vial. The pharmacist views all images as a part of the final product-checking process. This process allows the pharmacist to verify that the correct quantity of medication was transferred from the primary source to a secondary container without being physically present at the time of transfer. Telepharmacy and bar coding provide a means to improve the accuracy of chemotherapy preparation by decreasing the likelihood of using the incorrect product or quantity of drug. The system facilitates the reading of small product labels and removes the need for a pharmacist to handle contaminated syringes and vials when checking the final product.