A DMAP Program for the Selection of Accelerometer Locations in MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Peck, Jeff; Torres, Isaias

2004-01-01

A new program for selecting sensor locations has been written in the DMAP (Direct Matrix Abstraction Program) language of MSC/NASTRAN. The program implements the method of Effective Independence for selecting sensor locations, and is executed within a single NASTRAN analysis as a "rigid format alter" to the normal modes solution sequence (SOL 103). The user of the program is able to choose among various analysis options using Case Control and Bulk Data entries. Algorithms tailored for the placement of both uni-axial and tri- axial accelerometers are available, as well as several options for including the model s mass distribution into the calculations. Target modes for the Effective Independence analysis are selected from the MSC/NASTRAN ASET modes calculated by the "SOL 103" solution sequence. The initial candidate sensor set is also under user control, and is selected from the ASET degrees of freedom. Analysis results are printed to the MSCINASTRAN output file (*.f06), and may include the current candidate sensors set, and their associated Effective Independence distribution, at user specified iteration intervals. At the conclusion of the analysis, the model is reduced to the final sensor set, and frequencies and orthogonality checks are printed. Example results are given for a pre-test analysis of NASA s five-segment solid rocket booster modal test.

Status and Future of the Naval R&D Establishment

DTIC Science & Technology

2010-09-23

Market mostly here C u w e s t c o s t Global Allies Quadrant...Becoming more important and threatening L o w Free Market • Requires new mechanisms to handle 17 Framework for Assessment Implications S li Bupp er ase...t c o s t B a s e Corner: • Use sparingly Other US military US H i g u s t o m e r B • Prioritize rigorously Government US Market C u

Aerobic Exercise Training Prevents Heart Failure-Induced Skeletal Muscle Atrophy by Anti-Catabolic, but Not Anabolic Actions

PubMed Central

Souza, Rodrigo W. A.; Piedade, Warlen P.; Soares, Luana C.; Souza, Paula A. T.; Aguiar, Andreo F.; Vechetti-Júnior, Ivan J.; Campos, Dijon H. S.; Fernandes, Ana A. H.; Okoshi, Katashi; Carvalho, Robson F.; Cicogna, Antonio C.; Dal-Pai-Silva, Maeli

2014-01-01

Background Heart failure (HF) is associated with cachexia and consequent exercise intolerance. Given the beneficial effects of aerobic exercise training (ET) in HF, the aim of this study was to determine if the ET performed during the transition from cardiac dysfunction to HF would alter the expression of anabolic and catabolic factors, thus preventing skeletal muscle wasting. Methods and Results We employed ascending aortic stenosis (AS) inducing HF in Wistar male rats. Controls were sham-operated animals. At 18 weeks after surgery, rats with cardiac dysfunction were randomized to 10 weeks of aerobic ET (AS-ET) or to an untrained group (AS-UN). At 28 weeks, the AS-UN group presented HF signs in conjunction with high TNF-α serum levels; soleus and plantaris muscle atrophy; and an increase in the expression of TNF-α, NFκB (p65), MAFbx, MuRF1, FoxO1, and myostatin catabolic factors. However, in the AS-ET group, the deterioration of cardiac function was prevented, as well as muscle wasting, and the atrophy promoters were decreased. Interestingly, changes in anabolic factor expression (IGF-I, AKT, and mTOR) were not observed. Nevertheless, in the plantaris muscle, ET maintained high PGC1α levels. Conclusions Thus, the ET capability to attenuate cardiac function during the transition from cardiac dysfunction to HF was accompanied by a prevention of skeletal muscle atrophy that did not occur via an increase in anabolic factors, but through anti-catabolic activity, presumably caused by PGC1α action. These findings indicate the therapeutic potential of aerobic ET to block HF-induced muscle atrophy by counteracting the increased catabolic state. PMID:25330387

Modifying soil water status and improving stand establishment in a water repellent soil using surfactant coated seed.

NASA Astrophysics Data System (ADS)

Kostka, Stanley; Lampe, Mark; van Mondfrans, Jan; Madsen, Matthew; McMillan, Mica

2015-04-01

Surfactant seed coating (SSC) is a technology being developed cooperatively by scientists at the USDA, Agricultural Research Service and Aquatrols to improve stand establishment in water repellent soils, particularly under arid conditions. Early SSC studies have demonstrated that surfactant coatings can dramatically increase soil water content, turfgrass density, cover, and biomass for Kentucky bluegrass, tall fescue and perennial ryegrass sown in water repellent soils under greenhouse conditions. However, in these studies, surfactant loads were excessive (≥ 40 wt% of seed mass). The objective of the current study was to ascertain if a lower surfactant treatment level (10 wt%) would improve emergence and stand establishment in a severely water repellent sandy soil under field conditions. Research was conducted on a golf course near Utrecht, NL. At the time of planting water drop penetration time (WDPT) of the soil was approximately 300 s, indicating severe water repellency. Chewings fescue (Festuca rubra subsp. commutata) seed was treated with ASET-4001 surfactant at a loading rate of 10 wt% using two different proprietary coating procedures (US Patent Application 20100267554). The two different ASET-4001 coatings were compared against untreated seed in a randomized complete block design with four replicates. In order to maximize abiotic stresses, the only applied water came from rainfall. Assessments of stand establishment were made every 7-14 days for three months using a subjective visual assessment of percent grass cover and sward quality based on a 1-10 scale (where 10 is best). At six months post-sowing, 20 mm x 300 mm soil cores were randomly removed from each plot and soil wetting front depth measured. Improved emergence of the surfactant coated seeds over the untreated seeds began to appear 7 days after sowing. However, there were no differences between the two SSC treatments. Establishment was influenced by weather conditions. From mid-June to early July, ratings were similar between all treatments. However, with the onset of warmer more stressful growing conditions in mid-July, stand establishment ratings for the SSC treatments were higher than for the untreated control. From 16 July to 18 August, stand establishment ratings for the SSC treatments were between 9.1 and 9.8. In the untreated control plots, 16 July ratings were at 7.1 and dropped precipitously to 5.3 by 18 August. The visual differences between treatments suggested that rootzone water may be greater in the SSC treatments. Mean wetting front depths in cores collected from the SSC plots were at minimum 2x greater than untreated controls (200 mm vs 100 mm) confirming that SSC resulted in greater rootzone water distribution. SSC improved emergence and stand establishment of Chewings fescue and modified the soil wetting pattern in severely water repellent sand for at least six months. SSC may provide a sustainable strategy to improve turfgrass establishment under water stress conditions or when irrigation is limited.

NPLOT: an Interactive Plotting Program for NASTRAN Finite Element Models

NASA Technical Reports Server (NTRS)

Jones, G. K.; Mcentire, K. J.

1985-01-01

The NPLOT (NASTRAN Plot) is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models. Developed at NASA's Goddard Space Flight Center, the program provides flexible element selection and grid point, ASET and SPC degree of freedom labelling. It is easy to use and provides a combination menu and command driven user interface. NPLOT also provides very fast hidden line and haloed line algorithms. The hidden line algorithm in NPLOT proved to be both very accurate and several times faster than other existing hidden line algorithms. A fast spatial bucket sort and horizon edge computation are used to achieve this high level of performance. The hidden line and the haloed line algorithms are the primary features that make NPLOT different from other plotting programs.

JTEC Panel report on electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John; Meieran, Gene; Pecht, Michael; Peeples, John; Tummala, Rao; Dehaemer, Michael J.; Holdridge, Geoff (Editor); Gamota, George

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies.

29 CFR 1615.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

29 CFR 1615.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

29 CFR 1615.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

29 CFR 1615.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

29 CFR 1615.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

29 CFR 2205.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Electronic and information technology requirements. 2205... ELECTRONIC AND INFORMATION TECHNOLOGY § 2205.135 Electronic and information technology requirements. (a) In... and information technology developed, procured, maintained, or used by the agency allows: (1...

29 CFR 2205.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Electronic and information technology requirements. 2205... ELECTRONIC AND INFORMATION TECHNOLOGY § 2205.135 Electronic and information technology requirements. (a) In... and information technology developed, procured, maintained, or used by the agency allows: (1...

29 CFR 2205.135 - Electronic and information technology requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Electronic and information technology requirements. 2205... ELECTRONIC AND INFORMATION TECHNOLOGY § 2205.135 Electronic and information technology requirements. (a) In... and information technology developed, procured, maintained, or used by the agency allows: (1...

Site Remediation Technology InfoBase: A Guide to Federal Programs, Information Resources, and Publications on Contaminated Site Cleanup Technologies. First Edition

NASA Technical Reports Server (NTRS)

1998-01-01

Table of Contents: Federal Cleanup Programs; Federal Site Remediation Technology Development Assistance Programs; Federal Site Remediation Technology Development Electronic Data Bases; Federal Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Selected Bibliography: Federal Publication on Alternative and Innovative Site Remediation; and Appendix: Technology Program Contacts.

48 CFR 1352.239-71 - Electronic and information technology.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility...

48 CFR 1352.239-71 - Electronic and information technology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility...

48 CFR 1352.239-71 - Electronic and information technology.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility...

48 CFR 1352.239-71 - Electronic and information technology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility...

Extension Learners' Use of Electronic Technology

ERIC Educational Resources Information Center

Guenthner, Joseph F.; Swan, Benjamin G.

2011-01-01

Extension clientele use electronic technology for entertainment, communication, and business. Educational programs that use electronic technology can enhance learning. To learn more about use of electronic technology among Extension clientele, we surveyed 80 university students and 135 potato farmers. We found that the farmers were likely to use…

39 CFR 255.4 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2013-07-01 2013-07-01 false Accessibility to electronic and information...

39 CFR 255.4 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2014-07-01 2014-07-01 false Accessibility to electronic and information...

39 CFR 255.4 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2012-07-01 2012-07-01 false Accessibility to electronic and information...

39 CFR 255.4 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2011-07-01 2011-07-01 false Accessibility to electronic and information...

Performance Testing in Electronic Technology. Final Report.

ERIC Educational Resources Information Center

Williamson, Bert; Pedersen, Joe F.

This set of 21 performance tests in electronics technology was developed on the basis of a review of commercial and noncommercial instructional materials dealing with electronics technology. The tests, which were reviewed by a group of community college instructors and an advisory committee for electronics technology, address the following…

16 CFR 6.152 - Program accessibility: Electronic and information technology.

Code of Federal Regulations, 2011 CFR

2011-01-01

... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology: (1...

16 CFR 6.152 - Program accessibility: Electronic and information technology.

Code of Federal Regulations, 2014 CFR

2014-01-01

... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology: (1...

16 CFR 6.152 - Program accessibility: Electronic and information technology.

Code of Federal Regulations, 2012 CFR

2012-01-01

... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology: (1...

16 CFR 6.152 - Program accessibility: Electronic and information technology.

Code of Federal Regulations, 2013 CFR

2013-01-01

... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology: (1...

39 CFR 255.4 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology. 255.4 Section 255.4 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with...

21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

Code of Federal Regulations, 2010 CFR

2010-04-01

... technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to sign orders for Schedule I and II controlled substances may use any technology to sign and electronically... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for technologies for electronic...

29 CFR 1615.103 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.103 Definitions.... Electronic and Information technology. Includes information technology and any equipment or interconnected... information. The term electronic and information technology includes, but is not limited to...

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

Global spatially explicit CO2 emission metrics at 0.25° horizontal resolution for forest bioenergy

NASA Astrophysics Data System (ADS)

Cherubini, F.

2015-12-01

Bioenergy is the most important renewable energy option in studies designed to align with future RCP projections, reaching approximately 250 EJ/yr in RCP2.6, 145 EJ/yr in RCP4.5 and 180 EJ/yr in RCP8.5 by the end of the 21st century. However, many questions enveloping the direct carbon cycle and climate response to bioenergy remain partially unexplored. Bioenergy systems are largely assessed under the default climate neutrality assumption and the time lag between CO2 emissions from biomass combustion and CO2 uptake by vegetation is usually ignored. Emission metrics of CO2 from forest bioenergy are only available on a case-specific basis and their quantification requires processing of a wide spectrum of modelled or observed local climate and forest conditions. On the other hand, emission metrics are widely used to aggregate climate impacts of greenhouse gases to common units such as CO2-equivalents (CO2-eq.), but a spatially explicit analysis of emission metrics with global forest coverage is today lacking. Examples of emission metrics include the global warming potential (GWP), the global temperature change potential (GTP) and the absolute sustained emission temperature (aSET). Here, we couple a global forest model, a heterotrophic respiration model, and a global climate model to produce global spatially explicit emission metrics for CO2 emissions from forest bioenergy. We show their applications to global emissions in 2015 and until 2100 under the different RCP scenarios. We obtain global average values of 0.49 ± 0.03 kgCO2-eq. kgCO2-1 (mean ± standard deviation), 0.05 ± 0.05 kgCO2-eq. kgCO2-1, and 2.14·10-14 ± 0.11·10-14 °C (kg yr-1)-1, and 2.14·10-14 ± 0.11·10-14 °C (kg yr-1)-1 for GWP, GTP and aSET, respectively. We also present results aggregated at a grid, national and continental level. The metrics are found to correlate with the site-specific turnover times and local climate variables like annual mean temperature and precipitation. Simplified equations are derived to infer metric values from the turnover time of the biomass feedstock and the fraction of forest residues left on site after harvest. Our results provide a basis for assessing CO2 emissions from forest bioenergy under different indicators and across various spatial and temporal scales.

The Development of a Framework for and a Model Teaching-Learning System in Electronics Technology for the Elementary School.

ERIC Educational Resources Information Center

Inaba, Lawrence Akio

Developing a rationale and a structure of knowledge as the basis for an instructional system in electronics technology and designing and developing a packaged instructional system in electronics technology for the sixth grade is the two-fold purpose of this study. The study identifies electronics technology within the broad framework of industrial…

76 FR 77738 - Telecommunications Act Accessibility Guidelines; Electronic and Information Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... Telecommunications Act Accessibility Guidelines and its Electronic and Information Technology Accessibility Standards... electronic and information technology covered by Section 508 of the Rehabilitation Act Amendments of 1998. 76.... 2011-07] RIN 3014-AA37 Telecommunications Act Accessibility Guidelines; Electronic and Information...

12 CFR 352.5 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and information technology. (a) In accordance with section 508 of the Rehabilitation Act, the FDIC shall ensure, absent an undue burden, that the electronic and information technology the agency develops... or procurement of electronic and information technology that meets the standards published by the...

12 CFR 352.5 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and information technology. (a) In accordance with section 508 of the Rehabilitation Act, the FDIC shall ensure, absent an undue burden, that the electronic and information technology the agency develops... or procurement of electronic and information technology that meets the standards published by the...

12 CFR 352.5 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and information technology. (a) In accordance with section 508 of the Rehabilitation Act, the FDIC shall ensure, absent an undue burden, that the electronic and information technology the agency develops... or procurement of electronic and information technology that meets the standards published by the...

12 CFR 352.5 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and information technology. (a) In accordance with section 508 of the Rehabilitation Act, the FDIC shall ensure, absent an undue burden, that the electronic and information technology the agency develops... or procurement of electronic and information technology that meets the standards published by the...

48 CFR 352.239-73 - Electronic information and technology accessibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technology accessibility. 352.239-73 Section 352.239-73 Federal Acquisition Regulations System HEALTH AND... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology...

48 CFR 352.239-73 - Electronic information and technology accessibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology accessibility. 352.239-73 Section 352.239-73 Federal Acquisition Regulations System HEALTH AND... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology...

48 CFR 352.239-73 - Electronic information and technology accessibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technology accessibility. 352.239-73 Section 352.239-73 Federal Acquisition Regulations System HEALTH AND... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology...

48 CFR 352.239-73 - Electronic information and technology accessibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technology accessibility. 352.239-73 Section 352.239-73 Federal Acquisition Regulations System HEALTH AND... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology...

Applied Physics Modules Selected for Electrical and Electronic Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of twenty-three learning modules is equivalent to the content of two quarters of a five-credit hour class in electrical technology, electronic service technology, electronic engineering technology, or electromechanical…

48 CFR 1352.239-71 - Electronic and information technology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology. 1352.239-71 Section 1352.239-71 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must...

48 CFR 352.239-73 - Electronic information and technology accessibility.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology accessibility. 352.239-73 Section 352.239-73 Federal Acquisition Regulations System HEALTH AND... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology...

The Extent to Which Electronic Technology Education Is Meeting Employment Needs of Industry.

ERIC Educational Resources Information Center

Wamble, Jack D.

A study compared the perceptions of electronic technology education teachers and employers in the electronics industry regarding the competencies graduates need for employment in the industry. The study population consisted of 27 state institutions with electronics technology programs in Arkansas, Missouri, Kansas, Oklahoma, Illinois, Kentucky,…

Special Technology Area Review on Vacuum Electronics Technology for RF Applications

DTIC Science & Technology

2000-12-12

systems. QUESTIONS TO BE ADDRESSED AT THE STAR: 1. What are the RF applications and systems that will benefit from advances in Vacuum Electronic...technologies? What are the status and prospects of early insertion efforts? What is the impact if technology efforts are successful? 2. What are the RF...technical barriers best addressed by Vacuum Electronic technologies? What are the technology advancement needs and opportunities? Can the barriers

Using social knowledge networking technology to enable meaningful use of electronic health record technology in hospitals and health systems.

PubMed

Rangachari, Pavani

2014-12-01

Despite the federal policy momentum towards "meaningful use" of Electronic Health Records, the healthcare organizational literature remains replete with reports of unintended adverse consequences of implementing Electronic Health Records, including: increased work for clinicians, unfavorable workflow changes, and unexpected changes in communication patterns & practices. In addition to being costly and unsafe, these unintended adverse consequences may pose a formidable barrier to "meaningful use" of Electronic Health Records. Correspondingly, it is essential for hospital administrators to understand and detect the causes of unintended adverse consequences, to ensure successful implementation of Electronic Health Records. The longstanding Technology-in-Practice framework emphasizes the role of human agency in enacting structures of technology use or "technologies-in-practice." Given a set of unintended adverse consequences from health information technology implementation, this framework could help trace them back to specific actions (types of technology-in-practice) and institutional conditions (social structures). On the other hand, the more recent Knowledge-in-Practice framework helps understand how information and communication technologies ( e.g. , social knowledge networking systems) could be implemented alongside existing technology systems, to create new social structures, generate new knowledge-in-practice, and transform technology-in-practice. Therefore, integrating the two literature streams could serve the dual purpose of understanding and overcoming unintended adverse consequences of Electronic Health Record implementation. This paper seeks to: (1) review the theoretical literatures on technology use & implementation, and identify a framework for understanding & overcoming unintended adverse consequences of implementing Electronic Health Records; (2) outline a broad project proposal to test the applicability of the framework in enabling "meaningful use" of Electronic Health Records in a healthcare context; and (3) identify strategies for successful implementation of Electronic Health Records in hospitals & health systems, based on the literature review and application.

Electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

BOK-Printed Electronics

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2013-01-01

The use of printed electronics technologies (PETs), 2D or 3D printing approaches either by conventional electronic fabrication or by rapid graphic printing of organic or nonorganic electronic devices on various small or large rigid or flexible substrates, is projected to grow exponentially in commercial industry. This has provided an opportunity to determine whether or not PETs could be applicable for low volume and high-reliability applications. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the current status of organic and printed electronics technologies. It reviews three key industry roadmaps- on this subject-OE-A, ITRS, and iNEMI-each with a different name identification for this emerging technology. This followed by a brief review of the status of the industry on standard development for this technology, including IEEE and IPC specifications. The report concludes with key technologies and applications and provides a technology hierarchy similar to those of conventional microelectronics for electronics packaging. Understanding key technology roadmaps, parameters, and applications is important when judicially selecting and narrowing the follow-up of new and emerging applicable technologies for evaluation, as well as the low risk insertion of organic, large area, and printed electronics.

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 9 2011-04-01 2011-04-01 false Standards for technologies for electronic... JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS General § 1311.05 Standards for technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to sign...

Technology Acceptance of Electronic Medical Records by Nurses

ERIC Educational Resources Information Center

Stocker, Gary

2010-01-01

The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

48 CFR 311.7000 - Defining electronic information technology requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

48 CFR 311.7000 - Defining electronic information technology requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

48 CFR 311.7000 - Defining electronic information technology requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

48 CFR 311.7000 - Defining electronic information technology requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

48 CFR 311.7000 - Defining electronic information technology requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

48 CFR 339.201-70 - Required provision and contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... provision in 352.239-73(a), Electronic and Information Technology Accessibility, in solicitations valued at... insert the clause in 352.239-73(b), Electronic and Information Technology Accessibility, in contracts and...

48 CFR 339.201-70 - Required provision and contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... provision in 352.239-73(a), Electronic and Information Technology Accessibility, in solicitations valued at... insert the clause in 352.239-73(b), Electronic and Information Technology Accessibility, in contracts and...

48 CFR 339.201-70 - Required provision and contract clause.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... provision in 352.239-73(a), Electronic and Information Technology Accessibility, in solicitations valued at... insert the clause in 352.239-73(b), Electronic and Information Technology Accessibility, in contracts and...

48 CFR 339.201-70 - Required provision and contract clause.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... provision in 352.239-73(a), Electronic and Information Technology Accessibility, in solicitations valued at... insert the clause in 352.239-73(b), Electronic and Information Technology Accessibility, in contracts and...

48 CFR 339.201-70 - Required provision and contract clause.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SERVICES SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... provision in 352.239-73(a), Electronic and Information Technology Accessibility, in solicitations valued at... insert the clause in 352.239-73(b), Electronic and Information Technology Accessibility, in contracts and...

The CM SAF CLAAS-2 cloud property data record

NASA Astrophysics Data System (ADS)

Benas, Nikos; Finkensieper, Stephan; Stengel, Martin; van Zadelhoff, Gerd-Jan; Hanschmann, Timo; Hollmann, Rainer; Fokke Meirink, Jan

2017-04-01

A new cloud property data record was lately released by the EUMETSAT Satellite Application Facility on Climate Monitoring (CM SAF), based on measurements from geostationary Meteosat Spinning Enhanced Visible and Infrared Imager (SEVIRI) sensors, spanning the period 2004-2015. The CLAAS-2 (Cloud property dAtAset using SEVIRI, Edition 2) data record includes cloud fractional coverage, thermodynamic phase, cloud top height, water path and corresponding optical thickness and particle effective radius separately for liquid and ice clouds. These variables are available at high resolution 15-minute, daily and monthly basis. In this presentation the main improvements in the retrieval algorithms compared to the first edition of the data record (CLAAS-1) are highlighted along with their impact on the quality of the data record. Subsequently, the results of extensive validation and inter-comparison efforts against ground observations, as well as active and passive satellite sensors are summarized. Overall good agreement is found, with similar spatial and temporal characteristics, along with small biases caused mainly by differences in retrieval approaches, spatial/temporal samplings and viewing geometries.

Application of fire and evacuation models in evaluation of fire safety in railway tunnels

NASA Astrophysics Data System (ADS)

Cábová, Kamila; Apeltauer, Tomáš; Okřinová, Petra; Wald, František

2017-09-01

The paper describes an application of numerical simulation of fire dynamics and evacuation of people in a tunnel. The software tool Fire Dynamics Simulator is used to simulate temperature resolution and development of smoke in a railway tunnel. Comparing to temperature curves which are usually used in the design stage results of the model show that the numerical model gives lower temperature of hot smoke layer. Outputs of the numerical simulation of fire also enable to improve models of evacuation of people during fires in tunnels. In the presented study the calculated high of smoke layer in the tunnel is in 10 min after the fire ignition lower than the level of 2.2 m which is considered as the maximal limit for safe evacuation. Simulation of the evacuation process in bigger scale together with fire dynamics can provide very valuable information about important security conditions like Available Safe Evacuation Time (ASET) vs Required Safe Evacuation Time (RSET). On given example in software EXODUS the paper summarizes selected results of evacuation model which should be in mind of a designer when preparing an evacuation plan.

Acoustic transmission and radiation analysis of adaptive shape-memory alloy reinforced laminated plates

NASA Astrophysics Data System (ADS)

Liang, C.; Rogers, C. A.; Fuller, C. R.

1991-02-01

A theoretical analysis of sound transmission/radiation of shape-memory alloy (SMA) hybrid composite panels is presented. Unlike other composite materials, SMA hybrid composite is dynamically tunable by electrical activation of the SMA fibers and has numerous active control capabilities. Two of the concepts that will be briefly described and utilized in this paper are referred to as active property tuning (APT) and active strain energy tuning (ASET). Tuning or activating the embedded shape-memory alloy fibers in conventional composite materials changes the overall stiffness of the SMA hybrid composite structure and consequently changes natural frequency and mode shapes. The sound transmission and radiation from a composite panel is related to its frequency and mode shapes. Because of the capability to change both the natural frequency and mode shapes, the acoustic characteristics of SMA hybrid composite plates can be changed as well. The directivity pattern, radiation efficiency, and transmission loss of laminated composite materials are investigated based on 'composite' mode shapes in order to derive a basic understanding of the nature and authority of acoustic control by use of SMA hybrid composites.

Packaging Technologies for 500C SiC Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu

2013-01-01

Various SiC electronics and sensors are currently under development for applications in 500C high temperature environments such as hot sections of aerospace engines and the surface of Venus. In order to conduct long-term test and eventually commercialize these SiC devices, compatible packaging technologies for the SiC electronics and sensors are required. This presentation reviews packaging technologies developed for 500C SiC electronics and sensors to address both component and subsystem level packaging needs for high temperature environments. The packaging system for high temperature SiC electronics includes ceramic chip-level packages, ceramic printed circuit boards (PCBs), and edge-connectors. High temperature durable die-attach and precious metal wire-bonding are used in the chip-level packaging process. A high temperature sensor package is specifically designed to address high temperature micro-fabricated capacitive pressure sensors for high differential pressure environments. This presentation describes development of these electronics and sensor packaging technologies, including some testing results of SiC electronics and capacitive pressure sensors using these packaging technologies.

Japan's electronic packaging technologies

NASA Technical Reports Server (NTRS)

Tummala, Rao R.; Pecht, Michael

1995-01-01

The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

Applications and advances in electronic-nose technologies

Treesearch

A. D. Wilson; M. Baietto

2009-01-01

Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software...

42 CFR 425.506 - Electronic health records technology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Electronic health records technology. 425.506 Section 425.506 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Standards and Reporting § 425.506 Electronic health records technology. (a) ACOs, ACO participants, and ACO...

42 CFR 425.506 - Electronic health records technology.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Electronic health records technology. 425.506 Section 425.506 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Standards and Reporting § 425.506 Electronic health records technology. (a) ACOs, ACO participants, and ACO...

42 CFR 425.506 - Electronic health records technology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Electronic health records technology. 425.506 Section 425.506 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Standards and Reporting § 425.506 Electronic health records technology. (a) ACOs, ACO participants, and ACO...

45 CFR 170.207 - Vocabulary standards for representing electronic health information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.207 Vocabulary standards for representing electronic...

45 CFR 170.207 - Vocabulary standards for representing electronic health information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.207 Vocabulary standards for representing electronic...

45 CFR 170.207 - Vocabulary standards for representing electronic health information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.207 Vocabulary standards for representing electronic...

45 CFR 170.207 - Vocabulary standards for representing electronic health information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.207 Vocabulary standards for representing electronic...

Principal Challenges Facing Electronic Records Management in Federal Agencies Today.

ERIC Educational Resources Information Center

Patterson, Giovanna; Sprehe, J. Timothy

2002-01-01

Discusses electronic records management in the federal government. Highlights include managing electronic mail; information technology planning, systems design, and architecture; updating conventional records management; integrating electronic records management with other information technology systems; challenges of end-user training; business…

The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2007-01-01

This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

Electronic Publishing. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on electronic publishing for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor and student sections are…

16 CFR 6.103 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... alleged victims of discrimination. Electronic and information technology includes information technology... that contains embedded information technology that is used as an integral part of the product, but the..., and medical equipment where information technology is integral to its operation are not electronic and...

A Survey of Power Electronics Applications in Aerospace Technologies

NASA Technical Reports Server (NTRS)

Kankam, M. David; Elbuluk, Malik E.

2001-01-01

The insertion of power electronics in aerospace technologies is becoming widespread. The application of semiconductor devices and electronic converters, as summarized in this paper, includes the International Space Station, satellite power system, and motor drives in 'more electric' technology applied to aircraft, starter/generators and reusable launch vehicles. Flywheels, servo systems embodying electromechanical actuation, and spacecraft on-board electric propulsion are discussed. Continued inroad by power electronics depends on resolving incompatibility of using variable frequency for 400 Hz-operated aircraft equipment. Dual-use electronic modules should reduce system development cost.

NASA Electronic Parts and Packaging Program

NASA Technical Reports Server (NTRS)

Kayali, Sammy

2000-01-01

NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

The role of electronic communication technology in adolescent dating violence.

PubMed

Draucker, Claire Burke; Martsolf, Donna S

2010-08-01

Adolescent dating violence and electronic aggression are significant public health problems. The purpose of this study was to (a) identify ways in which technology is used in dating violence and (b) present examples of dating violence in which electronic aggression played a salient role. The data set included the transcribed narratives of 56 young adults who had described their adolescent dating violence experiences for an on going study. Eight ways in which technology is used in dating violence were identified using qualitative descriptive methods. The findings indicate that electronic communication technology influences dating violence by redefining boundaries between dating partners.

HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

76 FR 16233 - Interpretive Rule Regarding Electronic Contributor Redesignations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... technological innovations * * * where such technology would not compromise the intent of the Act and regulations... Commission encourages the use of innovations in technology to effectuate electronic redesignations. In that...

Report of the U.S. Department of Education Task Force on Learning and Electronic Technology.

ERIC Educational Resources Information Center

Office of Educational Research and Improvement (ED), Washington, DC.

Part of the Department of Education's planning and review process on the potential role and application of learning and electronic technologies in education, this report is based on a review of information from several sources, including reports, studies, survey data, and other literature on the availability and use of electronic technology in…

16 CFR 6.152 - Program accessibility: Electronic and information technology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information technology, the Commission shall ensure, unless an undue burden would be imposed on the agency, that the...

77 FR 72985 - Health Information Technology: Revisions to the 2014 Edition Electronic Health Record...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... Technology: Revisions to the 2014 Edition Electronic Health Record Certification Criteria; and Medicare and... National Coordinator for Health Information Technology (ONC) and Centers for Medicare & Medicaid Services... National Coordinator for Health Information Technology, Attention: Steven Posnack, Hubert H. Humphrey...

12 CFR 352.5 - Accessibility to electronic and information technology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technology. 352.5 Section 352.5 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND... and information technology. (a) In accordance with section 508 of the Rehabilitation Act, the FDIC shall ensure, absent an undue burden, that the electronic and information technology the agency develops...

School Superintendents' Use of Electronic Communication Technology and Its Impact on Their Efficacy as a School District Leader

ERIC Educational Resources Information Center

Brock, Cecilia

2017-01-01

As apex leaders, school superintendents are impacted by the continuous demand to be effective while utilizing electronic communication technology. The purpose of this study is to investigate how the use of electronic communication technology impacts a school superintendent's efficacy. Public education, in the twenty-first century, finds itself in…

High Energy Electron Injection (E-Beam) Technology for the 'Ex-Situ' Treatment of MtBE-Contaminated Groundwater

NASA Astrophysics Data System (ADS)

Venosa, A. D.

2002-09-01

This Innovative Technology Evaluation Report documents the results of a demonstration of the high-energy electron injection (E-Beam) technology in application to groundwater contaminated with methyl t-butyl ether (MtBE) and with benzene, toluene, ethylbenzene, and xylenes (BTEX). The E-beam technology destroys organic contaminants in groundwater through irradiation with a beam of high-energy electrons. The demonstration was conducted at the Naval Base Ventura County (NBVC) in Port Hueneme, California.

Electronics Teacher's Guide. Science and Technology Document Series No. 40.

ERIC Educational Resources Information Center

Lewis, John

This is the second document on the teaching of electronics to appear as part of UNESCO's science and technology education program. An introductory section describes the role that electronics plays as part of the physics curriculum. The following section outlines the content of the electronics course. The outline includes guidelines for determining…

Electronic Mentoring as an Example for the Use of Information and Communications Technology in Engineering Education

ERIC Educational Resources Information Center

Mueller, Sigrid

2004-01-01

Electronic mentoring programmes at colleges and universities and especially in engineering and science are a relatively new phenomenon. Electronic mentoring has been developed based on the possibilities unique to information and communications technology. The common feature of electronic mentoring programmes is the independence from geography and…

A systematic review of portable electronic technology for health education in resource-limited settings.

PubMed

McHenry, Megan S; Fischer, Lydia J; Chun, Yeona; Vreeman, Rachel C

2017-08-01

The objective of this study is to conduct a systematic review of the literature of how portable electronic technologies with offline functionality are perceived and used to provide health education in resource-limited settings. Three reviewers evaluated articles and performed a bibliography search to identify studies describing health education delivered by portable electronic device with offline functionality in low- or middle-income countries. Data extracted included: study population; study design and type of analysis; type of technology used; method of use; setting of technology use; impact on caregivers, patients, or overall health outcomes; and reported limitations. Searches yielded 5514 unique titles. Out of 75 critically reviewed full-text articles, 10 met inclusion criteria. Study locations included Botswana, Peru, Kenya, Thailand, Nigeria, India, Ghana, and Tanzania. Topics addressed included: development of healthcare worker training modules, clinical decision support tools, patient education tools, perceptions and usability of portable electronic technology, and comparisons of technologies and/or mobile applications. Studies primarily looked at the assessment of developed educational modules on trainee health knowledge, perceptions and usability of technology, and comparisons of technologies. Overall, studies reported positive results for portable electronic device-based health education, frequently reporting increased provider/patient knowledge, improved patient outcomes in both quality of care and management, increased provider comfort level with technology, and an environment characterized by increased levels of technology-based, informal learning situations. Negative assessments included high investment costs, lack of technical support, and fear of device theft. While the research is limited, portable electronic educational resources present promising avenues to increase access to effective health education in resource-limited settings, contingent on the development of culturally adapted and functional materials to be used on such devices.

48 CFR 339.201 - Clarification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 339.201 Clarification. FAR Subpart 39.2, Electronic and Information Technology, requires Federal agencies to ensure that... have access to and use of information and data that is comparable to individuals without disabilities...

48 CFR 39.201 - Scope of subpart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 39.201 Scope of... the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR part 1194). (b) Further information on section 508 is available...

48 CFR 339.201 - Clarification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 339.201 Clarification. FAR Subpart 39.2, Electronic and Information Technology, requires Federal agencies to ensure that... have access to and use of information and data that is comparable to individuals without disabilities...

48 CFR 39.201 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 39.201 Scope of... the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR part 1194). (b) Further information on section 508 is available...

48 CFR 39.201 - Scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 39.201 Scope of... the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR part 1194). (b) Further information on section 508 is available...

48 CFR 39.201 - Scope of subpart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 39.201 Scope of... the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR part 1194). (b) Further information on section 508 is available...

48 CFR 39.201 - Scope of subpart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information Technology 39.201 Scope of... the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR part 1194). (b) Further information on section 508 is available...

Columbus electronic freight management evaluation : achieving business benefits with EFM technologies.

DOT National Transportation Integrated Search

2009-03-01

Effective innovation in information technology (IT) may be the most important tool for the private and public sectors to respond to international supply chain capacity constraints and congestion. Electronic Freight Management (EFM) technologies are m...

Samsung Licenses ORNL Transparent Superhydrophobic Glass Coating Technology for Electronic Devices

ScienceCinema

Aytug, Tolga

2018-06-12

Samsung Electronics has exclusively licensed optically clear superhydrophobic film technology from the Department of Energy’s Oak Ridge National Laboratory to improve the performance of glass displays on smartphones, tablets and other electronic devices.

Taming Disruptive Technologies, or How To Remain Relevant in the Digital Age.

ERIC Educational Resources Information Center

Blackwell, Philip

2001-01-01

Discusses electronic books as a disruptive technology, that is, a technology that has appeal to its users but upsets the traditional models. Highlights include a history of print technology; types of electronic books; reader devices; stakeholders, including users, librarians, and publishers; and how vendors can remain relevant. (LRW)

HIGH ENERGY ELECTRON INJECTION (E-BEAM) TECHNOLOGY FOR THE EX-SITU TREATMENT OF MTBE-CONTAMINATED GROUNDWATER INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

This Innovative Technology Evaluation Report documents the results of a demonstration of the high-energy electron injection (E-Beam) technology in application to groundwater contaminated with methyl t-butyl ether (MtBE) and with benzene, toluene, ethylbenzene, and xylenes (BTEX)....

29 CFR 2205.102 - Application.

Code of Federal Regulations, 2013 CFR

2013-07-01

... development, procurement, maintenance, and use of electronic and information technology. ... HEALTH REVIEW COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 2205...

29 CFR 2205.102 - Application.

Code of Federal Regulations, 2012 CFR

2012-07-01

... development, procurement, maintenance, and use of electronic and information technology. ... HEALTH REVIEW COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 2205...

29 CFR 2205.102 - Application.

Code of Federal Regulations, 2014 CFR

2014-07-01

... development, procurement, maintenance, and use of electronic and information technology. ... HEALTH REVIEW COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 2205...

The Impact of Electronic Commerce on the Publishing Industry: Towards a Business Value Complementarity Framework of Electronic Publishing.

ERIC Educational Resources Information Center

Scupola, Ada

1999-01-01

Discussion of the publishing industry and its use of information and communication technologies focuses on the way in which electronic-commerce technologies are changing and could change the publishing processes, and develops a business complementarity model of electronic publishing to maximize profitability and improve the competitive position.…

Electronic Teaching Portfolios: Technology Skills + Portfolio Development = Powerful Preservice Teachers.

ERIC Educational Resources Information Center

Capraro, Mary Margaret

An electronic portfolio is a collection of work captured by electronic means that serves as an exhibit of individual efforts, progress, and achievements in one or more areas. Due to rapid growth and updates in technology, keeping electronic portfolios is becoming increasingly common in a variety of educational settings. In fall 2002 at one large…

Electronic Teaching Portfolios: Technology Skills + Portfolio Development--Do They = Powerful Preservice Teachers?

ERIC Educational Resources Information Center

Capraro, Mary Margaret

2006-01-01

Electronic portfolios are a "collection of work captured by electronic means, that serves as an exhibit of individual efforts, progress, and achievements in one or more areas" (Weidmer, 1998, p. 586). Because of the rapid growth and updates in technology, keeping electronic portfolios is becoming increasingly common in a variety of educational…

CMOS technology: a critical enabler for free-form electronics-based killer applications

NASA Astrophysics Data System (ADS)

Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

2016-05-01

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

Electrical/electronics working group summary

NASA Technical Reports Server (NTRS)

Schoenfeld, A. D.

1984-01-01

The electrical/electronics, technology area was considered. It was found that there are no foreseeable circuit or component problems to hinder the implementation of the flywheel energy storage concept. The definition of the major component or technology developments required to permit a technology ready date of 1987 was addressed. Recommendations: motor/generators, suspension electronics, power transfer, power conditioning and distribution, and modeling. An introduction to the area of system engineering is also included.

FY2012 Advanced Power Electronics and Electric Motors Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Susan A.

The Advanced Power Electronics and Electric Motors (APEEM) program within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), thermal management, and traction drive system technologies that will leapfrog current on-the-road technologies. The research and development is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency.

FY2010 Annual Progress Report for Advanced Power Electronics and Electric Motors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Susan A.

2011-01-01

The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE) and electric motor technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

Emerging Organizational Electronic Communication Technologies: A Selected Review of the Literature.

ERIC Educational Resources Information Center

Hellweg, Susan A.; And Others

A selective review of research dealing with emerging organizational electronic communication technologies from the communication, management, and organizational psychology literature was divided into four categories: word processing, electronic mail, computer conferencing, and teleconferencing (audio/video). The analysis was directed specifically…

My Favorite Things Electronically Speaking.

ERIC Educational Resources Information Center

Glantz, Shelley

1997-01-01

Presents the results of an informal user survey on favorite information technology, including the best features of these. Discusses library online catalogs, electronic encyclopedias, CD-ROMs, laser discs, electronic magazine indexes, online services, the Internet, word processing programs, magazines as major sources of technology information,…

78 FR 46997 - Agency Information Collection Activities: Submission for Review; Information Collection Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... (DHS), Science and Technology, CyberForensics Electronic Technology Clearinghouse (CyberFETCH) Program... public to comment on data collection forms for the CyberForensics Electronic Technology Clearinghouse... for providing a collaborative environment for cyber forensics practitioners from law enforcement...

Advanced Electronic Technology

DTIC Science & Technology

1977-11-15

Electronics 15 III. Materials Research 15 TV. Microelectronics 16 V. Surface- Wave Technology 16 DATA SYSTEMS DIVISION 2 INTRODUCTION This...Processing Digital Voice Processing Packet Speech Wideband Integrated Voice/Data Technology Radar Signal Processing Technology Nuclear Safety Designs...facilities make it possible to track the status of these jobs, retrieve their job control language listings, and direct a copy of printed or punched

HDTV versus electronic cinema

NASA Astrophysics Data System (ADS)

Tinker, Michael

1998-12-01

We are on the brink of transforming the movie theatre with electronic cinema. Technologies are converging to make true electronic cinema, with a 'film look,' possible for the first time. In order to realize the possibilities, we must leverage current technologies in video compression, electronic projection, digital storage, and digital networks. All these technologies have only recently improved sufficiently to make their use in the electronic cinema worthwhile. Video compression, such as MPEG-2, is designed to overcome the limitations of video, primarily limited bandwidth. As a result, although HDTV offers a serious challenge to film-based cinema, it falls short in a number of areas, such as color depth. Freed from the constraints of video transmission, and using the recently improved technologies available, electronic cinema can move beyond video; Although movies will have to be compressed for some time, what is needed is a concept of 'cinema compression,' rather than video compression. Electronic cinema will open up vast new possibilities for viewing experiences at the theater, while at the same time offering up the potential for new economies in the movie industry.

DEMONSTRATION BULLETIN: HIGH VOLTAGE ELECTRON BEAM TECHNOLOGY - HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.

EPA Science Inventory

The high energy electron beam irradiation technology is a low temperature method for destroying complex mixtures of hazardous organic chemicals in solutions containing solids. The system consists of a computer-automated, portable electron beam accelerator and a delivery system. T...

A Survey of Electronics Obsolescence and Reliability

DTIC Science & Technology

2010-07-01

properties but there are many minor and major variations (e.g. curing schedule) affecting their usage in packaging processes and in reworking. Curing...within them. Electronic obsolescence is increasingly associated with physical characteristics that reduce component and system reliability, both in usage ...semiconductor technologies and of electronic systems, both in usage and in storage. By design, electronics technologies include few reliability margins

Electron Technology: ELTE 2016

NASA Astrophysics Data System (ADS)

Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

2016-12-01

In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

Innovative, wearable snap connector technology for improved device networking in electronic garments

NASA Astrophysics Data System (ADS)

Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

2007-04-01

This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

Advances in Electronic-Nose Technologies Developed for Biomedical Applications

PubMed Central

Wilson, Alphus D.; Baietto, Manuela

2011-01-01

The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry. PMID:22346620

Integrating an Academic Electronic Health Record: Challenges and Success Strategies.

PubMed

Herbert, Valerie M; Connors, Helen

2016-08-01

Technology is increasing the complexity in the role of today's nurse. Healthcare organizations are integrating more health information technologies and relying on the electronic health record for data collection, communication, and decision making. Nursing faculty need to prepare graduates for this environment and incorporate an academic electronic health record into a nursing curriculum to meet student-program outcomes. Although the need exists for student preparation, some nursing programs are struggling with implementation, whereas others have been successful. To better understand these complexities, this project was intended to identify current challenges and success strategies of effective academic electronic health record integration into nursing curricula. Using Rogers' 1962 Diffusion of Innovation theory as a framework for technology adoption, a descriptive survey design was used to gain insights from deans and program directors of nursing schools involved with the national Health Informatics & Technology Scholars faculty development program or Cerner's Academic Education Solution Consortium, working to integrate an academic electronic health record in their respective nursing schools. The participants' experiences highlighted approaches used by these schools to integrate these technologies. Data from this project provide nursing education with effective strategies and potential challenges that should be addressed for successful academic electronic health record integration.

Models for Building Knowledge in a Technology-Rich Setting: Teacher Education

ERIC Educational Resources Information Center

MacKinnon, Gregory R.; Aylward, M. Lynn

2009-01-01

Technology offers promising opportunities for creating new types of classroom learning environments. This paper describes three technology models used by teacher education interns: electronic portfolios, negotiative concept mapping, cognote-supported electronic discussions. As implemented in the current study, these models invoke graduated…

76 FR 22910 - Agency Information Collection Activities: Submission for Review; Information Collection Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... (DHS), Science and Technology, CyberForensics Electronic Technology Clearinghouse (CyberFETCH) Program... public to comment on data collection forms for the CyberForensics Electronic Technology Clearinghouse... forensics practitioners from law enforcement, private sector and academia. This clearinghouse will enable...

76 FR 7870 - Agency Information Collection Activities: Submission for Review; Information Collection Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... (DHS), Science and Technology, CyberForensics Electronic Technology Clearinghouse (CyberFETCH) Program... public to comment on data collection forms for the CyberForensics Electronic Technology Clearinghouse... forensics practitioners from law enforcement, private sector and academia. This clearinghouse will enable...

78 FR 66949 - Agency Information Collection Activities: Submission for Review; Information Collection Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... (DHS), Science and Technology, CyberForensics Electronic Technology Clearinghouse (CyberFETCH) Program... public to comment on data collection forms for the CyberForensics Electronic Technology Clearinghouse... forensics practitioners from law enforcement, private sector and academia. This clearinghouse will enable...

42 CFR 495.2 - Basis and purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) STANDARDS AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM General... certified electronic health record (EHR) technology. (b) Section 1853(1) of the Act to provide incentive... certified EHR technology and meet certain other requirements. (c) Section 1886(n) of the Act by establishing...

42 CFR 495.2 - Basis and purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) STANDARDS AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM General... certified electronic health record (EHR) technology. (b) Section 1853(1) of the Act to provide incentive... certified EHR technology and meet certain other requirements. (c) Section 1886(n) of the Act by establishing...

42 CFR 495.2 - Basis and purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) STANDARDS AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM General... certified electronic health record (EHR) technology. (b) Section 1853(1) of the Act to provide incentive... certified EHR technology and meet certain other requirements. (c) Section 1886(n) of the Act by establishing...

42 CFR 495.2 - Basis and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) STANDARDS AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM General... certified electronic health record (EHR) technology. (b) Section 1853(1) of the Act to provide incentive... certified EHR technology and meet certain other requirements. (c) Section 1886(n) of the Act by establishing...

42 CFR 495.2 - Basis and purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) STANDARDS AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM General... certified electronic health record (EHR) technology. (b) Section 1853(1) of the Act to provide incentive... certified EHR technology and meet certain other requirements. (c) Section 1886(n) of the Act by establishing...

Lithium-Ion Technology for Aerospace Applications- Advancing Battery Management Electronics

NASA Astrophysics Data System (ADS)

Gitzendanner, R.; Jones, E.; Deory, C.; Carmen, D.

2005-05-01

Lithium-ion technology offers a unique, weight and volume saving, solution to the power storage needs of space applications. With higher energy and power densities than conventional technologies, such as Nickel-Hydrogen (Ni-H) and Nickel/Cadmium (Ni- Cd), and comparable cycle life and reliability, Lithium-ion technology is gaining interest in many space applications. As the demand for Lithium-ion batteries with high reliability and long life increases, the need for battery management electronics, including individual cell balancing and monitoring, becomes apparent. With onboard electronics, the cells are monitored individually, and are protected from over charge or over discharge by way of integral protection circuitry. State of Charge, State of Health and other useful telemetry can also be calculated by the integrated electronics and reported to the application. Lab-based, and real-life, testing and use of these battery systems has shown the advantages of an integrated electronics package.

Book of Knowledge (BOK) for NASA Electronic Packaging Roadmap

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2015-01-01

The objective of this document is to update the NASA roadmap on packaging technologies (initially released in 2007) and to present the current trends toward further reducing size and increasing functionality. Due to the breadth of work being performed in the area of microelectronics packaging, this report presents only a number of key packaging technologies detailed in three industry roadmaps for conventional microelectronics and a more recently introduced roadmap for organic and printed electronics applications. The topics for each category were down-selected by reviewing the 2012 reports of the International Technology Roadmap for Semiconductor (ITRS), the 2013 roadmap reports of the International Electronics Manufacturing Initiative (iNEMI), the 2013 roadmap of association connecting electronics industry (IPC), the Organic Printed Electronics Association (OE-A). The report also summarizes the results of numerous articles and websites specifically discussing the trends in microelectronics packaging technologies.

Electronics Troubleshooting. High-Technology Training Module.

ERIC Educational Resources Information Center

Lodahl, Dan

This learning module for a postsecondary electronics course in solid state circuits is designed to help teachers lead students through electronics troubleshooting. The module is intended to be used for a second-semester technical college course for electromechanical technology majors. The module introduces students to semiconductor devices and…

NASA Tech Briefs, July 1998. Volume 22, No. 7

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on graphics and simulation, electronic components and circuits, electronic systems, materials, a second special coverage on mechanical technology, machinery/automation, and a special section of electronics Tech Briefs. There is also a section devoted to the technology of the International Space Station.

Electronics Technology. Performance Objectives. Basic Course.

ERIC Educational Resources Information Center

Campbell, Guy

Several intermediate performance objectives and corresponding criterion measures are listed for each of 20 terminal objectives for a basic electronics technology course. The materials were developed for a two-semester course (2 hours daily) designed to include instruction in basic electricity and electronic fundamentals, and to develop skills and…

Control technology for future aircraft propulsion systems

NASA Technical Reports Server (NTRS)

Zeller, J. R.; Szuch, J. R.; Merrill, W. C.; Lehtinen, B.; Soeder, J. F.

1984-01-01

The need for a more sophisticated engine control system is discussed. The improvements in better thrust-to-weight ratios demand the manipulation of more control inputs. New technological solutions to the engine control problem are practiced. The digital electronic engine control (DEEC) system is a step in the evolution to digital electronic engine control. Technology issues are addressed to ensure a growth in confidence in sophisticated electronic controls for aircraft turbine engines. The need of a control system architecture which permits propulsion controls to be functionally integrated with other aircraft systems is established. Areas of technology studied include: (1) control design methodology; (2) improved modeling and simulation methods; and (3) implementation technologies. Objectives, results and future thrusts are summarized.

NASA Tech Briefs, June 1993. Volume 17, No. 6

NASA Technical Reports Server (NTRS)

1993-01-01

Topics include: Imaging Technology: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

NASA Tech Briefs, February 1993. Volume 17, No. 2

NASA Technical Reports Server (NTRS)

1993-01-01

Topics include: Communication Technology; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

Printing versus coating - What will be the future production technology for printed electronics?

NASA Astrophysics Data System (ADS)

Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank

2015-02-01

The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

FY2011 Advanced Power Electronics and Electric Motors Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Susan A.

The Advanced Power Electronics and Electric Motors (APEEM) program within the DOE Vehicle Technologies Program (VTP) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), thermal management, and traction drive system technologies that will leapfrog current on-the-road technologies. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

78 FR 36446 - Proposed Amendments to Rules of Practice and Procedure

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... in a manner to be specified in the Commission's Handbook on Filing Procedures. The Commission is contemplating various technology options and is soliciting comment prior to developing the specific filing...'' technology that has been superseded by electronic mail or other electronic communication technologies...

75 FR 77006 - Notice of Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-10

... copyrights, including the utilization and disposition of same. The NASA New Technology Summary Report... patent rights and new technology encourage the contractor to use an electronic form and provide a hyperlink to the electronic New Technology Reporting Web (eNTRe) site http://invention.nasa.gov . This Web...

Accessibility of Electronically Mediated Education: Policy Issues

ERIC Educational Resources Information Center

Blair, Martin E.; Goldmann, Hilary; Relton, Joy

2004-01-01

Electronic technology has transformed education systems over the past 30 years. Generally speaking, technology has been an incredible benefit for individuals with disabilities. However, the use of technology, particularly in education, has been sometimes discriminatory toward those who are unable to interact with it in the standard ways…

Electronic Books: Towards a Theoretical Framework for Research.

ERIC Educational Resources Information Center

Yeaman, Andrew R. J.

In an increasingly technological society, there is a social need for designing communication technology around the perceptual abilities and cognitive strategies of people. A growing demand for information has created additional pressure on emerging communication technologies to provide electronic alternatives to the printed page. Design depends…

Exploring TeleRobotics: A Radio-Controlled Robot

ERIC Educational Resources Information Center

Deal, Walter F., III; Hsiung, Steve C.

2007-01-01

Robotics is a rich and exciting multidisciplinary area to study and learn about electronics and control technology. The interest in robotic devices and systems provides the technology teacher with an excellent opportunity to make many concrete connections between electronics, control technology, and computers and science, engineering, and…

Effects associated with nanostructure fabrication using in situ liquid cell TEM technology

DOE PAGES

Chen, Xin; Zhou, Lihui; Wang, Ping; ...

2015-07-28

We studied silicon, carbon, and SiC x nanostructures fabricated using liquid-phase electron-beam-induced deposition technology in transmission electron microscopy systems. Nanodots obtained from fixed electron beam irradiation followed a universal size versus beam dose trend, with precursor concentrations from pure SiCl 4 to 0 % SiCl 4 in CH 2Cl 2, and electron beamintensity ranges of two orders of magnitude, showing good controllability of the deposition. Secondary electrons contributed to the determination of the lateral sizes of the nanostructures, while the primary beam appeared to have an effect in reducing the vertical growth rate. These results can be used to generatemore » donut-shaped nanostructures. Using a scanning electron beam, line structures with both branched and unbranched morphologies were also obtained. As a result, the liquid-phase electron-beam induced deposition technology is shown to be an effective tool for advanced nanostructured material generation.« less

Application of nonlocal plasma technology for controlling plasma conductivity

NASA Astrophysics Data System (ADS)

Yuan, Chengxun; Demidov, V. I.; Kudryavtsev, A. A.; Kurlyandskaya, I. P.; Rudakova, T. V.; Zhou, Z. X.

2017-10-01

A promising approach for better control of the plasma parameters involves the exploitation of peculiarities of plasmas with a nonlocal electron energy distribution. Nonlocal plasma technology (NLP-technology) is based on the effect of energetic electrons in the plasma volume. In this work, an experimental study of influence of the chemo-ionization processes on non-stationary plasma conductivity has been conducted. Due to energetic, supra-thermal electrons, which appear in the chemo-ionization reactions, the highly non-equilibrium and time dependent nonlocal electron energy distribution function is formed. In such a plasma thermal electrons always have positive conductivity (mobility), while supra-thermal, energetic electrons may have negative conductivity in heavy (argon, krypton and xenon) noble gases dependently on conditions. Experiments demonstrate that this effect may lead to the non-monotonic temporal behavior of plasma conductivity and may potentially create the negative electron mobility.

The Future of Product Design Utilising Printed Electronics

ERIC Educational Resources Information Center

York, Nicola; Southee, Darren; Evans, Mark

2017-01-01

This paper addresses the teaching of emerging technologies to design students, using "printed electronics" as an example as it recently became viable to mass manufacture and is ready for use in designs. Printed electronics is introduced as a disruptive technology, and approaches employed in knowledge transfer to industrial/product…

77 FR 66729 - National Oil and Hazardous Substances Pollution Contingency Plan; Revision To Increase Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... technology, to include computer telecommunications or other electronic means, that the lead agency is... assess the capacity and resources of the public to utilize and maintain an electronic- or computer... the technology, to include computer telecommunications or other electronic means, that the lead agency...

Real Electronic Commerce: Smart Cards on the Superhighway.

ERIC Educational Resources Information Center

Birch, David

1997-01-01

Technologies of payment rather than technologies of connection are the real trigger for the expansion of electronic commerce on the Internet. This article discusses "smart cards," highlighting Mondex, the electronic purse developed in the United Kingdom. Predicts that cash will be replaced by "e-cash," which is cheaper to make,…

Information and Communicative Technology--Computers as Research Tools

ERIC Educational Resources Information Center

Sarsani, Mahender Reddy

2007-01-01

The emergence of "the electronic age,/electronic cottages/the electronic world" has affected the whole world; particularly the emergence of computers has penetrated everyone's life to a remarkable degree. They are being used in various fields including education. Recent advances, especially in the area of computer technology have…

The Impact of Electronic Communication Technology on Written Language

ERIC Educational Resources Information Center

Hamzah, Mohd. Sahandri Gani B.; Ghorbani, Mohd. Reza; Abdullah, Saifuddin Kumar B.

2009-01-01

Communication technology is changing things. Language is no exception. Some language researchers argue that language is deteriorating due to increased use in electronic communication. The present paper investigated 100 randomly selected electronic mails (e-mails) and 50 short messaging system (SMS) messages of a representative sample of…

76 FR 67153 - Federal Acquisition Regulation; Submission for OMB Review; Payment by Electronic Fund Transfer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

...; Submission for OMB Review; Payment by Electronic Fund Transfer AGENCY: Department of Defense (DOD), General... collection requirement concerning payment by electronic fund transfer. A notice was published in the Federal... technological collection techniques or other forms of information technology. DATES: Submit comments on or...

Standard Hardware Acquisition and Reliability Program's (SHARP's) efforts in incorporating fiber optic interconnects into standard electronic module (SEM) connectors

NASA Astrophysics Data System (ADS)

Riggs, William R.

1994-05-01

SHARP is a Navy wide logistics technology development effort aimed at reducing the acquisition costs, support costs, and risks of military electronic weapon systems while increasing the performance capability, reliability, maintainability, and readiness of these systems. Lower life cycle costs for electronic hardware are achieved through technology transition, standardization, and reliability enhancement to improve system affordability and availability as well as enhancing fleet modernization. Advanced technology is transferred into the fleet through hardware specifications for weapon system building blocks of standard electronic modules, standard power systems, and standard electronic systems. The product lines are all defined with respect to their size, weight, I/O, environmental performance, and operational performance. This method of defining the standard is very conducive to inserting new technologies into systems using the standard hardware. This is the approach taken thus far in inserting photonic technologies into SHARP hardware. All of the efforts have been related to module packaging; i.e. interconnects, component packaging, and module developments. Fiber optic interconnects are discussed in this paper.

What does an e-mail address add? - Doing health and technology at home.

PubMed

Andreassen, Hege K

2011-02-01

There is increasing interest in using electronic mail and other electronic health technologies (e-health technologies) in patient follow-ups. This study sheds light on patients' reception of provider-initiated e-health in their everyday environments. In a research project carried out in Norway (2005-2007), an electronic address for a hospital dermatology ward was offered to 50 patient families for improved access to expert advice from the patients' homes. Drawing on semi-structured interviews with 12 families, this paper explores how the electronic address was integrated into everyday health practice. The research illuminates how the electronic address did not only represent changes related to treatment procedures and frequency or nature of expert contact; it was also important to other practices in the everyday lives of the families of patients with chronic illness. Once in place on the patients' computers, the electronic address was ascribed at least four different roles: it was used as the intended riverbed for a flow of information, but also as a safety alarm, as a shield to the medical gaze and as a token of competence in care and parenting. The multiplicity in use and reception of an electronic address in patient settings illustrates the need to include patients' everyday practices in current professional and political discussions of e-mail and other e-health technologies. Thus this paper argues that there is a need for research on electronic patient-provider communication that moves beyond frequency of use and questions on how technology will affect medical encounters. Social science equally needs to investigate how provider-initiated e-health technologies gets involved in patients' moral and social performance of health and illness in everyday life. Copyright © 2010 Elsevier Ltd. All rights reserved.

75 FR 63205 - Notice of Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

..., including the utilization and disposition of same. The NASA New Technology Summary Report reporting form is... new technology encourage the contractor to use an electronic form and provide a hyperlink to the electronic New Technology Reporting Web (eNTRe) site http://invention.nasa.gov . This Web site has been set...

Electronic Media, Videodisc Technology, and the Visual Arts.

ERIC Educational Resources Information Center

Anderson, Frances E.

1985-01-01

The potential of electronic media for art education is examined. Discussed are computers, video recorders, interactive video discs, and two-way cable television. Emphasis is on laser videodisc technology. What changes must occur in the educational system to accommodate technology and discipline-based art education are also discussed. (Author/RM)

The Electronic Classroom: A Handbook for Education in the Electronic Environment.

ERIC Educational Resources Information Center

Boschmann, Erwin, Ed.

This book explores emerging technologies and their use in secondary and higher education and in private, corporate, and government training environments. In addition to providing specific classroom applications of technology, the book treats issues of research, technology assessment, legal, copyright, and privacy rights, ethical considerations,…

78 FR 65884 - 2014 Edition Electronic Health Record Certification Criteria: Revision to the Definition of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... Use (MU) Data Set'' AGENCY: Office of the National Coordinator for Health Information Technology (ONC... procedures data for electronic health record (EHR) technology testing and certification. DATES: Effective... Human Services, Office of the National Coordinator for Health Information Technology, Attention: Steven...

Electronic Devices and Systems. Energy Technology Series.

ERIC Educational Resources Information Center

Technical Education Research Centre-Southwest, Waco, TX.

This course in electronic devices and systems is one of 16 courses in the Energy Technology Series developed for an Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in…

Prospects for applications of electron beams in processing of gas and oil hydrocarbons

NASA Astrophysics Data System (ADS)

Ponomarev, A. V.; Pershukov, V. A.; Smirnov, V. P.

2015-12-01

Waste-free processing of oil and oil gases can be based on electron-beam technologies. Their major advantage is an opportunity of controlled manufacturing of a wide range of products with a higher utility value at moderate temperatures and pressures. The work considers certain key aspects of electron beam technologies applied for the chain cracking of heavy crude oil, for the synthesis of premium gasoline from oil gases, and also for the hydrogenation, alkylation, and isomerization of unsaturated oil products. Electronbeam processing of oil can be embodied via compact mobile modules which are applicable for direct usage at distant oil and gas fields. More cost-effective and reliable electron accelerators should be developed to realize the potential of electron-beam technologies.

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective

PubMed Central

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-01-01

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study. PMID:28347078

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective.

PubMed

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-09-07

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

NASA Tech Briefs, January 1994. Volume 18, No. 1

NASA Technical Reports Server (NTRS)

1994-01-01

Topics include: Communications Technology; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports.

Innovation Incubator: LiquidCool Solutions Technical Evaluation. Laboratory Study and Demonstration Results of a Directed-Flow, Liquid Submerged Server for High-Efficiency Data Centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kozubal, Eric J

LiquidCool Solutions (LCS) has developed liquid submerged server (LSS) technology that changes the way computer electronics are cooled. The technology provides an option to cool electronics by the direct contact flow of dielectric fluid (coolant) into a sealed enclosure housing all the electronics of a single server. The intimate dielectric fluid contact with electronics improves the effectiveness of heat removal from the electronics.

Electronics for better healthcare.

PubMed

Wolf, Bernhard; Herzog, Karolin

2013-06-01

Microelectronics and microsystem technology have changed our daily lives considerably in the past 50 years. Countless everyday objects contain microelectronic components. In healthcare up to the present, however, it has not been possible to make major alterations in introducing electronics and information technology that would lead to innovative improvements and greater transparency. This paper describes initial steps in diagnostics and oncological therapy including telematic healthcare systems which can, for example, assist patients with cardiovascular diseases and shows, through these areas, how electronics and microsystems technology can contribute to better healthcare.

Limitations of opto-electronic neural networks

NASA Technical Reports Server (NTRS)

Yu, Jeffrey; Johnston, Alan; Psaltis, Demetri; Brady, David

1989-01-01

Consideration is given to the limitations of implementing neurons, weights, and connections in neural networks for electronics and optics. It is shown that the advantages of each technology are utilized when electronically fabricated neurons are included and a combination of optics and electronics are employed for the weights and connections. The relationship between the types of neural networks being constructed and the choice of technologies to implement the weights and connections is examined.

Nurses' Experiences of an Initial and Reimplemented Electronic Health Record Use.

PubMed

Chang, Chi-Ping; Lee, Ting-Ting; Liu, Chia-Hui; Mills, Mary Etta

2016-04-01

The electronic health record is a key component of healthcare information systems. Currently, numerous hospitals have adopted electronic health records to replace paper-based records to document care processes and improve care quality. Integrating healthcare information system into traditional nursing daily operations requires time and effort for nurses to become familiarized with this new technology. In the stages of electronic health record implementation, smooth adoption can streamline clinical nursing activities. In order to explore the adoption process, a descriptive qualitative study design and focus group interviews were conducted 3 months after and 2 years after electronic health record system implementation (system aborted 1 year in between) in one hospital located in southern Taiwan. Content analysis was performed to analyze the interview data, and six main themes were derived, in the first stage: (1) liability, work stress, and anticipation for electronic health record; (2) slow network speed, user-unfriendly design for learning process; (3) insufficient information technology/organization support; on the second stage: (4) getting used to electronic health record and further system requirements, (5) benefits of electronic health record in time saving and documentation, (6) unrealistic information technology competence expectation and future use. It concluded that user-friendly design and support by informatics technology and manpower backup would facilitate this adoption process as well.

Reliability and quality EEE parts issues

NASA Technical Reports Server (NTRS)

Barney, Dan; Feigenbaum, Irwin

1990-01-01

NASA policy and procedures are established which govern the selection, testing, and application of electrical, electronic, and electromechanical (EEE) parts. Recent advances in the state-of-the-art of electronic parts and associated technologies can significantly impact the electronic designs and reliability of NASA space transportation avionics. Significant issues that result from these advances are examined, including: recent advances in microelectronics technology (as applied to or considered for use in NASA projects); electron packaging technology advances (concurrent with, and as a result of, the development of the advanced microelectronic devices); availability of parts used in space avionics; and standardization and integration of parts activities between projects, centers, and contractors.

The Pervasiveness and Impact of Electronic Communication Technologies in Organizations: A Survey of Major American Corporations.

ERIC Educational Resources Information Center

Hellweg, Susan A.; And Others

A survey of the Fortune 500 corporations was conducted to ascertain the pervasiveness and perceived impact of five electronic communication technologies (electronic mail, videotex, interactive computers, video teleconferencing, and word processing). Ninety-four corporations responded to a 53-item questionnaire and follow-up survey. Analysis of the…

Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

ERIC Educational Resources Information Center

Ntloedibe-Kuswani, Gomang Seratwa

2013-01-01

Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

Space electronics technology summary

NASA Technical Reports Server (NTRS)

1976-01-01

An overview is given of current electronics R and D activities, potential future thrusts, and related NASA payoffs. Major increases in NASA mission return and significant concurrent reductions in mission cost appear possible through a focused, long range electronics technology program. The overview covers: guidance assessments, navigation and control, and sensing and data acquisition processing, storage, and transfer.

Accessible Electronic and Information Technology

EPA Pesticide Factsheets

This Policy establishes EPA's responsibilities and procedures for making its Electronic and Information Technology (EIT) products accessible to all people, including people with disabilities, in accordance with Section 508 of the Rehabilitation Act.

FY2013 Advanced Power Electronics and Electric Motors R&D Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Susan A.

The Advanced Power Electronics and Electric Motors (APEEM) technology area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system tomore » improve fuel efficiency through research in more efficient TDSs.« less

Evidence-based use of electronic clinical tracking systems in advanced practice registered nurse education: an integrative review.

PubMed

Branstetter, M Laurie; Smith, Lynette S; Brooks, Andrea F

2014-07-01

Over the past decade, the federal government has mandated healthcare providers to incorporate electronic health records into practice by 2015. This technological update in healthcare documentation has generated a need for advanced practice RN programs to incorporate information technology into education. The National Organization of Nurse Practitioner Faculties created core competencies to guide program standards for advanced practice RN education. One core competency is Technology and Information Literacy. Educational programs are moving toward the utilization of electronic clinical tracking systems to capture students' clinical encounter data. The purpose of this integrative review was to evaluate current research on advanced practice RN students' documentation of clinical encounters utilizing electronic clinical tracking systems to meet advanced practice RN curriculum outcome goals in information technology as defined by the National Organization of Nurse Practitioner Faculties. The state of the science depicts student' and faculty attitudes, preferences, opinions, and data collections of students' clinical encounters. Although electronic clinical tracking systems were utilized to track students' clinical encounters, these systems have not been evaluated for meeting information technology core competency standards. Educational programs are utilizing electronic clinical tracking systems with limited evidence-based literature evaluating the ability of these systems to meet the core competencies in advanced practice RN programs.

The electronic transfer of information and aerospace knowledge diffusion

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Bishop, Ann P.; Barclay, Rebecca O.; Kennedy, John M.

1992-01-01

Increasing reliance on and investment in information technology and electronic networking systems presupposes that computing and information technology will play a motor role in the diffusion of aerospace knowledge. Little is known, however, about actual information technology needs, uses, and problems within the aerospace knowledge diffusion process. The authors state that the potential contributions of information technology to increased productivity and competitiveness will be diminished unless empirically derived knowledge regarding the information-seeking behavior of the members of the social system - those who are producing, transferring, and using scientific and technical information - is incorporated into a new technology policy framework. Research into the use of information technology and electronic networks by U.S. aerospace engineers and scientists, collected as part of a research project designed to study aerospace knowledge diffusion, is presented in support of this assertion.

Perspectives of healthcare practitioners: An exploration of interprofessional communication using electronic medical records.

PubMed

Bardach, Shoshana H; Real, Kevin; Bardach, David R

2017-05-01

Contemporary state-of-the-art healthcare facilities are incorporating technology into their building design to improve communication and patient care. However, technological innovations may also have unintended consequences. This study seeks to better understand how technology influences interprofessional communication within a hospital setting based in the United States. Nine focus groups were conducted including a range of healthcare professions. The focus groups explored practitioners' experiences working on two floors of a newly designed hospital and included questions about the ways in which technology shaped communication with other healthcare professionals. All focus groups were recorded, transcribed, and coded to identify themes. Participant responses focused on the electronic medical record, and while some benefits of the electronic medical record were discussed, participants indicated use of the electronic medical record has resulted in a reduction of in-person communication. Different charting approaches resulted in barriers to communication between specialties and reduced confidence that other practitioners had received one's notes. Limitations in technology-including limited computer availability, documentation complexity, and sluggish sign-in processes-also were identified as barriers to effective and timely communication between practitioners. Given the ways in which technology shapes interprofessional communication, future research should explore how to create standardised electronic medical record use across professions at the optimal level to support communication and patient care.

The Business and Technology of Electronic and Optical Publishing.

ERIC Educational Resources Information Center

Schwerin, Julie B.

1988-01-01

The first of a two-part series on the emergence of CD-ROM in the online publishing industry introduces the business and technology aspects of electronic and optical publishing. The development of CD-ROM products and differences between CD-ROM and online in the areas of technology, content, and marketing are discussed. (MES)

Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

Treesearch

Alphus D. Wilson

2013-01-01

Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition...

American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

PubMed

Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

2010-03-15

The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site. Copyright 2010. Published by Elsevier Inc.

American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee Report on Electronic Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Catherine C., E-mail: cpark@radonc.ucsf.ed; Yom, Sue S.; Podgorsak, Matthew B.

The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because ofmore » their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.« less

Improving the Effectiveness of Electronic Health Record-Based Referral Processes

PubMed Central

2012-01-01

Electronic health records are increasingly being used to facilitate referral communication in the outpatient setting. However, despite support by technology, referral communication between primary care providers and specialists is often unsatisfactory and is unable to eliminate care delays. This may be in part due to lack of attention to how information and communication technology fits within the social environment of health care. Making electronic referral communication effective requires a multifaceted “socio-technical” approach. Using an 8-dimensional socio-technical model for health information technology as a framework, we describe ten recommendations that represent good clinical practices to design, develop, implement, improve, and monitor electronic referral communication in the outpatient setting. These recommendations were developed on the basis of our previous work, current literature, sound clinical practice, and a systems-based approach to understanding and implementing health information technology solutions. Recommendations are relevant to system designers, practicing clinicians, and other stakeholders considering use of electronic health records to support referral communication. PMID:22973874

Requirements for prototyping an educational electronic health record: experiences and future directions.

PubMed

Kushniruk, Andre; Borycki, Elizabeth; Kuo, Mu-Hsing; Parapini, Eric; Wang, Shu Lin; Ho, Kendall

2014-01-01

Electronic health records and related technologies are being increasingly deployed throughout the world. It is expected that upon graduation health professionals will be able to use these technologies in effective and efficient ways. However, educating health professional students about such technologies has lagged behind. There is a need for software that will allow medical, nursing and health informatics students access to this important software to learn how it works and how to use it effectively. Furthermore, electronic health record educational software that is accessed should provide a range of functions including allowing instructors to build patient cases. Such software should also allow for simulation of a course of a patient's stay and the ability to allow instructors to monitor student use of electronic health records. In this paper we describe our work in developing the requirements for an educational electronic health record to support education about this important technology. We also describe a prototype system being developed based on the requirements gathered.

Electrical and electronic devices and components: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

Components and techniques which may be useful in the electronics industry are described. Topics discussed include transducer technology, printed-circuit technology, solid state devices, MOS transistors, Gunn device, microwave antennas, and position indicators.

Recent progress on thin-film encapsulation technologies for organic electronic devices

NASA Astrophysics Data System (ADS)

Yu, Duan; Yang, Yong-Qiang; Chen, Zheng; Tao, Ye; Liu, Yun-Fei

2016-03-01

Among the advanced electronic devices, flexible organic electronic devices with rapid development are the most promising technologies to customers and industries. Organic thin films accommodate low-cost fabrication and can exploit diverse molecules in inexpensive plastic light emitting diodes, plastic solar cells, and even plastic lasers. These properties may ultimately enable organic materials for practical applications in industry. However, the stability of organic electronic devices still remains a big challenge, because of the difficulty in fabricating commercial products with flexibility. These organic materials can be protected using substrates and barriers such as glass and metal; however, this results in a rigid device and does not satisfy the applications demanding flexible devices. Plastic substrates and transparent flexible encapsulation barriers are other possible alternatives; however, these offer little protection to oxygen and water, thus rapidly degrading the devices. Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation into the flexible devices. Because of these (and other) reasons, there has been an intense interest in developing transparent barrier materials with much lower permeabilities, and their market is expected to reach over 550 million by 2025. In this study, the degradation mechanism of organic electronic devices is reviewed. To increase the stability of devices in air, several TFE technologies were applied to provide efficient barrier performance. In this review, the degradation mechanism of organic electronic devices, permeation rate measurement, traditional encapsulation technologies, and TFE technologies are presented.

Flat panel ferroelectric electron emission display system

DOEpatents

Sampayan, Stephen E.; Orvis, William J.; Caporaso, George J.; Wieskamp, Ted F.

1996-01-01

A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

Electronics manufacturing and assembly in Japan

NASA Technical Reports Server (NTRS)

Kukowski, John A.; Boulton, William R.

1995-01-01

In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

Capacitively Coupled Arrays of Multiplexed Flexible Silicon Transistors for Long-Term Cardiac Electrophysiology

PubMed Central

Fang, Hui; Yu, Ki Jun; Gloschat, Christopher; Yang, Zijian; Chiang, Chia-Han; Zhao, Jianing; Won, Sang Min; Xu, Siyi; Trumpis, Michael; Zhong, Yiding; Song, Enming; Han, Seung Won; Xue, Yeguang; Xu, Dong; Cauwenberghs, Gert; Kay, Matthew; Huang, Yonggang; Viventi, Jonathan; Efimov, Igor R.; Rogers, John A.

2017-01-01

Advanced capabilities in electrical recording are essential for the treatment of heart-rhythm diseases. The most advanced technologies use flexible integrated electronics; however, the penetration of biological fluids into the underlying electronics and any ensuing electrochemical reactions pose significant safety risks. Here, we show that an ultrathin, leakage-free, biocompatible dielectric layer can completely seal an underlying layer of flexible electronics while allowing for electrophysiological measurements through capacitive coupling between tissue and the electronics, and thus without the need for direct metal contact. The resulting current-leakage levels and operational lifetimes are, respectively, four orders of magnitude smaller and between two and three orders of magnitude longer than those of any other flexible-electronics technology. Systematic electrophysiological studies with normal, paced and arrhythmic conditions in Langendorff hearts highlight the capabilities of the capacitive-coupling approach. Our technology provides a realistic pathway towards the broad applicability of biocompatible, flexible electronic implants. PMID:28804678

Fine Collimator Grids Using Silicon Metering Structure

NASA Technical Reports Server (NTRS)

Eberhard, Carol

1998-01-01

The project Fine Collimator Grids Using Silicon Metering Structure was managed by Dr. Carol Eberhard of the Electromagnetic Systems & Technology Department (Space & Technology Division) of TRW who also wrote this final report. The KOH chemical etching of the silicon wafers was primarily done by Dr. Simon Prussin of the Electrical Engineering Department of UCLA at the laboratory on campus. Moshe Sergant of the Superconductor Electronics Technology Department (Electronics Systems & Technology Division) of TRW and Dr. Prussin were instrumental in developing the low temperature silicon etching processes. Moshe Sergant and George G. Pinneo of the Microelectronics Production Department (Electronics Systems & Technology Division) of TRW were instrumental in developing the processes for filling the slots etched in the silicon wafers with metal-filled materials. Their work was carried out in the laboratories at the Space Park facility. Moshe Sergant is also responsible for the impressive array of Scanning Electron Microscope images with which the various processes were monitored. Many others also contributed their time and expertise to the project. I wish to thank them all.

Smart Technology in Lung Disease Clinical Trials.

PubMed

Geller, Nancy L; Kim, Dong-Yun; Tian, Xin

2016-01-01

This article describes the use of smart technology by investigators and patients to facilitate lung disease clinical trials and make them less costly and more efficient. By "smart technology" we include various electronic media, such as computer databases, the Internet, and mobile devices. We first describe the use of electronic health records for identifying potential subjects and then discuss electronic informed consent. We give several examples of using the Internet and mobile technology in clinical trials. Interventions have been delivered via the World Wide Web or via mobile devices, and both have been used to collect outcome data. We discuss examples of new electronic devices that recently have been introduced to collect health data. While use of smart technology in clinical trials is an exciting development, comparison with similar interventions applied in a conventional manner is still in its infancy. We discuss advantages and disadvantages of using this omnipresent, powerful tool in clinical trials, as well as directions for future research. Published by Elsevier Inc.

Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

Treesearch

Alphus D. Wilson

2012-01-01

Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

Future applications of electronic-nose technologies in healthcare and biomedicine

Treesearch

Alphus D. Wilson

2011-01-01

The development and utilization of many new electronic-nose (e-nose) applications in the healthcare and biomedical fields have continued to rapidly accelerate over the past 20 years. Innovative e-nose technologies are providing unique solutions to a diversity of complex problems in biomedicine that are now coming to fruition. A wide range of electronic-nose instrument...

Accessible Electronic and Information Technology: Standards, Procedures, and Guidance

EPA Pesticide Factsheets

Defines electronic and information technology (EIT), and the technical and functional performance criteria for EIT to comply with Section 508 accessibility standards. Includes EPA procedures for EIT approval, 508 complaints, and undue burden justification.

Technology scan for electronic toll collection.

DOT National Transportation Integrated Search

2008-06-01

The purpose of this project was to identify and assess available technologies and methodologies for electronic toll collection (ETC) and to develop recommendations for the best way(s) to implement toll collection in the Louisville metropolitan area. ...

Student pharmacists' use and perceived impact of educational technologies.

PubMed

Stolte, Scott K; Richard, Craig; Rahman, Ateequr; Kidd, Robert S

2011-06-10

To assess the frequency of use by and perceived impact of various educational technologies on student pharmacists. Data were obtained using a validated, Web-based survey instrument designed to evaluate the frequency of use and impact on learning of various technologies used in educating first-, second-, and third-year student pharmacists. Basic demographic data also were collected and analyzed. The majority (89.4%) of the 179 respondents were comfortable with the technology used in the academic program. The most frequently used technologies for educational purposes were in class electronic presentations, course materials posted on the school Web site, and e-mail. The technologies cited as having the most beneficial impact on learning were course materials posted on the Web site and in-class electronic presentations, and those cited as most detrimental were video-teleconferencing and online testing. Compared to the course textbook, students reported more frequent use of technologies such as electronic course materials, presentations, digital lecture recordings, e-mail, and hand-held devices. Because students' opinions of educational technologies varied, colleges and schools should incorporate educational technologies that students frequently use and that positively impact learning.

Fundamentals handbook of electrical and computer engineering. Volume 1 Circuits fields and electronics

NASA Astrophysics Data System (ADS)

Chang, S. S. L.

State of the art technology in circuits, fields, and electronics is discussed. The principles and applications of these technologies to industry, digital processing, microwave semiconductors, and computer-aided design are explained. Important concepts and methodologies in mathematics and physics are reviewed, and basic engineering sciences and associated design methods are dealt with, including: circuit theory and the design of magnetic circuits and active filter synthesis; digital signal processing, including FIR and IIR digital filter design; transmission lines, electromagnetic wave propagation and surface acoustic wave devices. Also considered are: electronics technologies, including power electronics, microwave semiconductors, GaAs devices, and magnetic bubble memories; digital circuits and logic design.

Electronics reliability and measurement technology

NASA Technical Reports Server (NTRS)

Heyman, Joseph S. (Editor)

1987-01-01

A summary is presented of the Electronics Reliability and Measurement Technology Workshop. The meeting examined the U.S. electronics industry with particular focus on reliability and state-of-the-art technology. A general consensus of the approximately 75 attendees was that "the U.S. electronics industries are facing a crisis that may threaten their existence". The workshop had specific objectives to discuss mechanisms to improve areas such as reliability, yield, and performance while reducing failure rates, delivery times, and cost. The findings of the workshop addressed various aspects of the industry from wafers to parts to assemblies. Key problem areas that were singled out for attention are identified, and action items necessary to accomplish their resolution are recommended.

NASA Tech Briefs, Winter 1977. Volume 2, No. 4

NASA Technical Reports Server (NTRS)

1977-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1979. Volume 4, No. 2

NASA Technical Reports Server (NTRS)

1979-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of neW products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

Patient care in a technological age.

PubMed

Dragon, Natalie

2006-07-01

In this electronically wired world of the 21 st century, the health care system has tapped into technology available at the touch of a button. Scientific discoveries, high-tech equipment, electronic medical records, Smarticards, and long distance diagnosis using telehealth technology have all been embraced. But Natalie Dragon asks, what are the implications for nurses and the outcomes on patient care?

NASA Tech Briefs, Summer 1981. Volume 6, No. 2

NASA Technical Reports Server (NTRS)

1981-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Winter 1980. Volume 5, No. 4

NASA Technical Reports Server (NTRS)

1980-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you In learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Fall 1980. Volume 5, No. 3

NASA Technical Reports Server (NTRS)

1980-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovatio.ns of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Fall 1978. Volume 3, No. 3

NASA Technical Reports Server (NTRS)

1978-01-01

Topics covered: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1984. Volume 8, No. 4

NASA Technical Reports Server (NTRS)

1984-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Science.

NASA Tech Briefs, Fall/Winter 1981. Vol. 6, No. 3

NASA Technical Reports Server (NTRS)

1981-01-01

Topics covered: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

The Most Likely Nemesis to Timely, Accurate Electronic Information

DTIC Science & Technology

2002-02-04

NETWORKS, TRAINING, COMMERCIAL OFF-THE-SHELF, INFORMATION TECHNOLOGY , INTERNET , COMMUNICATIONS EQUIPMENT, ELECTRONIC INFORMATION 15.Abstract... information . During a recent interview for Military Information Technology magazine, Lieutenant General John L. Woodward, Jr., USAF, Deputy Chief of Staff...NSC) Coordinator for Security, Infrastructure Protection and Counterterrorism, said the NSC did not want a czar for information technology (IT) nor

Telematics and Electronic Communication and Their Effect on Educational Space. [Brief No.] 3.

ERIC Educational Resources Information Center

Morton, James E.

A telematics and electronic communication task group examines technology's influence on the educational process as well as the physical classroom, and the needs and concerns these new technologies bring to architects and educators in designing an adaptable classroom. Technology and the classroom are examined in the following areas: the use of…

NASA Tech Briefs, Spring 1978. Volume 3, No. 1

NASA Technical Reports Server (NTRS)

1978-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

Advanced Sensor and Packaging Technologies for Intelligent Adaptive Engine Controls (Preprint)

DTIC Science & Technology

2013-05-01

combination of micro-electromechanical systems (MEMS) sensor technology, novel ceramic materials, high - temperature electronics, and advanced harsh...with simultaneous pressure measurements up to 1,000 psi. The combination of a high - temperature , high -pressure-ratio compressor system, and adaptive...combination of micro-electromechanical systems (MEMS) sensor technology, novel ceramic materials, high temperature electronics, and advanced harsh

NASA Tech Briefs, Winter 1978. Volume 3, No. 4

NASA Technical Reports Server (NTRS)

1978-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Winter 1983. Volume 8, No. 2

NASA Technical Reports Server (NTRS)

1983-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences;

NASA Tech Briefs, Winter 1982. Volume 7, No. 2

NASA Technical Reports Server (NTRS)

1982-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Spring 1981. Volume 6, No. 1

NASA Technical Reports Server (NTRS)

1981-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you In learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Spring 1984. Volume 8, No. 3

NASA Technical Reports Server (NTRS)

1984-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Fall 1976. Volume 1, No. 3

NASA Technical Reports Server (NTRS)

1976-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of seloc.ted Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1978

NASA Technical Reports Server (NTRS)

1978-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Solar Energy; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Winter 1979. Volume 4, No. 4

NASA Technical Reports Server (NTRS)

1979-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you In learning about and applying NASA technology; New Product Ideas: A summary of selected Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Fall 1977. Volume 2, No. 3

NASA Technical Reports Server (NTRS)

1977-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1980. Volume 5, No. 2

NASA Technical Reports Server (NTRS)

1980-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Spring 1977. Volume 2, No. 1

NASA Technical Reports Server (NTRS)

1977-01-01

Topics: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selted innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

Electronic Literacies in the Workplace: Technologies of Writing. Advances in Computers and Composition Studies Series.

ERIC Educational Resources Information Center

Sullivan, Patricia, Ed.; Dautermann, Jennie, Ed.

Contending that technology, especially when it networks writers to other writers, is more than a mere scribal tool, this book presents 14 essays designed to ignite interest in technology as one of the material conditions of workplace writing contexts. After an introduction ("Issues of Written Literacy and Electronic Literacy in Workplace…

NASA Tech Briefs, Fall 1982. Volume 7, No. 1

NASA Technical Reports Server (NTRS)

1982-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the develop ment of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Spring 1979. Volume 4, No. 1

NASA Technical Reports Server (NTRS)

1979-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences;

NASA Tech Briefs, Fall 1983. Volume 8, No. 1

NASA Technical Reports Server (NTRS)

1983-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Winter 1976. Volume 1, No. 4

NASA Technical Reports Server (NTRS)

1976-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of val ue to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1977. Volume 2, No. 2

NASA Technical Reports Server (NTRS)

1977-01-01

Topics: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Spring 1983. Volume 7, No. 3

NASA Technical Reports Server (NTRS)

1983-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences;

NASA Tech Briefs, Spring 1980. Volume 5, No. 1

NASA Technical Reports Server (NTRS)

1980-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Fall 1979. Volume 4, No. 3

NASA Technical Reports Server (NTRS)

1979-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

NASA Tech Briefs, Summer 1983. Volume 7, No. 4

NASA Technical Reports Server (NTRS)

1983-01-01

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and information Sciences.

NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 30: The electronic transfer of information and aerospace knowledge diffusion

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Bishop, Ann P.; Barclay, Rebecca O.; Kennedy, John M.

1992-01-01

Increasing reliance on and investment in information technology and electronic networking systems presupposes that computing and information technology will play a major role in the diffusion of aerospace knowledge. Little is known, however, about actual information technology needs, uses, and problems within the aerospace knowledge diffusion process. The authors state that the potential contributions of information technology to increased productivity and competitiveness will be diminished unless empirically derived knowledge regarding the information-seeking behavior of the members of the social system - those who are producing, transferring, and using scientific and technical information - is incorporated into a new technology policy framework. Research into the use of information technology and electronic networks by U.S. aerospace engineers and scientists, collected as part of a research project designed to study aerospace knowledge diffusion, is presented in support of this assertion.

Flat panel ferroelectric electron emission display system

DOEpatents

Sampayan, S.E.; Orvis, W.J.; Caporaso, G.J.; Wieskamp, T.F.

1996-04-16

A device is disclosed which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density. 6 figs.

Technology Developments in Radiation-Hardened Electronics for Space Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Howell, Joe T.

2008-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project consists of a series of tasks designed to develop and mature a broad spectrum of radiation hardened and low temperature electronics technologies. Three approaches are being taken to address radiation hardening: improved material hardness, design techniques to improve radiation tolerance, and software methods to improve radiation tolerance. Within these approaches various technology products are being addressed including Field Programmable Gate Arrays (FPGA), Field Programmable Analog Arrays (FPAA), MEMS, Serial Processors, Reconfigurable Processors, and Parallel Processors. In addition to radiation hardening, low temperature extremes are addressed with a focus on material and design approaches. System level applications for the RHESE technology products are discussed.

(abstract) Electronic Packaging for Microspacecraft Applications

NASA Technical Reports Server (NTRS)

Wasler, David

1993-01-01

The intent of this presentation is to give a brief look into the future of electronic packaging for microspacecraft applications. Advancements in electronic packaging technology areas have developed to the point where a system engineer's visions, concepts, and requirements for a microspacecraft can now be a reality. These new developments are ideal candidates for microspacecraft applications. These technologies are capable of bringing about major changes in how we design future spacecraft while taking advantage of the benefits due to size, weight, power, performance, reliability , and cost. This presentation will also cover some advantages and limitations of surface mount technology (SMT), multichip modules (MCM), and wafer scale integration (WSI), and what is needed to implement these technologies into microspacecraft.

A Brief Overview of NASA Glenn Research Center Sensor and Electronics Activities

NASA Technical Reports Server (NTRS)

Hunter, Gary W.

2012-01-01

Aerospace applications require a range of sensing technologies. There is a range of sensor and sensor system technologies being developed using microfabrication and micromachining technology to form smart sensor systems and intelligent microsystems. Drive system intelligence to the local (sensor) level -- distributed smart sensor systems. Sensor and sensor system development examples: (1) Thin-film physical sensors (2) High temperature electronics and wireless (3) "lick and stick" technology. NASA GRC is a world leader in aerospace sensor technology with a broad range of development and application experience. Core microsystems technology applicable to a range of application environmentS.

76 FR 41822 - In the Matter of Certain Toner Cartridges and Components Thereof; Notice of Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

... Electronics Co., Ltd of Chungchongbuk-do, South Korea; Huizhou Jahwa Electronics Co., Ltd. of Guangdong Province, China; Copy Technologies, Inc. of Atlanta, Georgia; Laser Toner Technology, Inc. of Atlanta...

High Frequency Electronic Packaging Technology

NASA Technical Reports Server (NTRS)

Herman, M.; Lowry, L.; Lee, K.; Kolawa, E.; Tulintseff, A.; Shalkhauser, K.; Whitaker, J.; Piket-May, M.

1994-01-01

Commercial and government communication, radar, and information systems face the challenge of cost and mass reduction via the application of advanced packaging technology. A majority of both government and industry support has been focused on low frequency digital electronics.

Computer programs: Electronic circuit design criteria: A compilation

NASA Technical Reports Server (NTRS)

1973-01-01

A Technology Utilization Program for the dissemination of information on technological developments which have potential utility outside the aerospace community is presented. The 21 items reported herein describe programs that are applicable to electronic circuit design procedures.

Recent developments in terahertz sensing technology

NASA Astrophysics Data System (ADS)

Shur, Michael

2016-05-01

Terahertz technology has found numerous applications for the detection of biological and chemical hazardous agents, medical diagnostics, detection of explosives, providing security in buildings, airports, and other public spaces, shortrange covert communications (in the THz and sub-THz windows), and applications in radio astronomy and space research. The expansion of these applications will depend on the development of efficient electronic terahertz sources and sensitive low-noise terahertz detectors. Schottky diode frequency multipliers have emerged as a viable THz source technology reaching a few THz. High speed three terminal electronic devices (FETs and HBTs) have entered the THz range (with cutoff frequencies and maximum frequencies of operation above 1 THz). A new approach called plasma wave electronics recently demonstrated an efficient terahertz detection in GaAs-based and GaN-based HEMTs and in Si MOS, SOI, FINFETs and in FET arrays. This progress in THz electronic technology has promise for a significant expansion of THz applications.

Flexible Electronics Development Supported by NASA

NASA Technical Reports Server (NTRS)

Baumann, Eric

2014-01-01

The commercial electronics industry is leading development in most areas of electronics for NASA applications; however, working in partnership with industry and the academic community, results from NASA research could lead to better understanding and utilization of electronic materials by the flexible electronics industry. Innovative ideas explored by our partners in industry and the broader U.S. research community help NASA execute our missions and bring new American products and services to the global technology marketplace. [Mike Gazarik, associate administrator for Space Technology, NASA Headquarters, Washington DC] This presentation provides information on NASA needs in electronics looking towards the future, some of the work being supported by NASA in flexible electronics, and the capabilities of the Glenn Research Center supporting the development of flexible electronics.

Electronic Access to Information: A New Service Paradigm. Proceedings from a Symposium (July 23-24, 1993, Palo Alto, California).

ERIC Educational Resources Information Center

Chiang, Win-Shin S., Ed.; Elkington, Nancy E., Ed.

The Research Libraries Group (RLG) hosted a symposium to explore opportunities for cooperative action--to take advantage of technology and to improve electronic access to information--particularly in the RLG context, and to develop strategies for making the most effective use of technology and electronic information in support of research and…

An Investigation of the Effectiveness of Four-Year Industrial Technology Programs In Preparing Industrial Electronic Technicians to Meet the Requirements of Industry.

ERIC Educational Resources Information Center

Prewitt, Roger W.

To determine the effectiveness of the 4-year industrial technology programs in preparing industrial electronic technicians for employment in industry, data were obtained through an opinionnaire, which was sent to the higher education institutions offering a 4-year electronic technician program and to selected industrial representatives located in…

Applications and Advances in Electronic-Nose Technologies

PubMed Central

Wilson, Alphus D.; Baietto, Manuela

2009-01-01

Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man. PMID:22346690

NASA Tech Briefs, Summer 1976. Volume 1, No. 2

NASA Technical Reports Server (NTRS)

1976-01-01

Topics covered include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences. Also included are; NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; and New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products.

75 FR 52551 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... Dayton, OH; Jahwa Electronics Co., Ltd. of Chungchongbuk-do, South Korea; Huizhou Jahwa Electronics Co., Ltd of Guangdong Province, China; Copy Technologies, Inc. of Atlanta, GA; Laser Toner Technology, Inc...

Employment Lessons from the Electronics Industry.

ERIC Educational Resources Information Center

Alic, John A.; Harris, Martha Caldwell

1986-01-01

Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

Pulsed electron accelerator for radiation technologies in the enviromental applications

NASA Astrophysics Data System (ADS)

Korenev, Sergey

1997-05-01

The project of pulsed electron accelerator for radiation technologies in the environmental applications is considered. An accelerator consists of high voltage generator with vacuum insulation and vacuum diode with plasma cathode on the basis discharge on the surface of dielectric of large dimensions. The main parameters of electron accelerators are following: kinetic energy 0.2 - 2.0 MeV, electron beam current 1 - 30 kA and pulse duration 1- 5 microseconds. The main applications of accelerator for decomposition of wastewaters are considered.

Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

PubMed

Cunningham, James; Ainsworth, John

2017-01-01

The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

An innovative approach to predict technology evolution for the desoldering of printed circuit boards: A perspective from China and America.

PubMed

Wang, Chen; Zhao, Wu; Wang, Jie; Chen, Ling; Luo, Chun-Jing

2016-06-01

The printed circuit boards basis of electronic equipment have seen a rapid growth in recent years and played a significant role in modern life. Nowadays, the fact that electronic devices upgrade quickly necessitates a proper management of waste printed circuit boards. Non-destructive desoldering of waste printed circuit boards becomes the first and the most crucial step towards recycling electronic components. Owing to the diversity of materials and components, the separation process is difficult, which results in complex and expensive recovery of precious materials and electronic components from waste printed circuit boards. To cope with this problem, we proposed an innovative approach integrating Theory of Inventive Problem Solving (TRIZ) evolution theory and technology maturity mapping system to forecast the evolution trends of desoldering technology of waste printed circuit boards. This approach can be applied to analyse the technology evolution, as well as desoldering technology evolution, then research and development strategy and evolution laws can be recommended. As an example, the maturity of desoldering technology is analysed with a technology maturity mapping system model. What is more, desoldering methods in different stages are analysed and compared. According to the analysis, the technological evolution trends are predicted to be 'the law of energy conductivity' and 'increasing the degree of idealisation'. And the potential technology and evolutionary state of waste printed circuit boards are predicted, offering reference for future waste printed circuit boards recycling. © The Author(s) 2016.

Electron-processing technology: A promising application for the viscose industry

NASA Astrophysics Data System (ADS)

Stepanik, T. M.; Rajagopal, S.; Ewing, D.; Whitehouse, R.

1998-06-01

In marketing its IMPELA ® line of high power, high-throughput industrial accelerators, Atomic Energy of Canada Limited (AECL) is working with viscose (rayon) companies world-wide to integrate electron-processing technology as part of the viscose manufacturing process. The viscose industry converts cellulose wood pulp into products such as staple fiber, filament, cord, film, packaging, and non-edible sausage casings. This multibillion dollar industry is currently suffering from high production costs, and is facing increasingly stringent environmental regulations. The use of electron-treated pulp can significantly lower production costs and can provide equally significant environmental benefits. This paper describes our current understanding of the benefits of using electron-treated pulp in this process, and AECL's efforts in developing this technology.

SiC Technology

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.

1998-01-01

Silicon carbide (SiC)-based semiconductor electronic devices and circuits are presently being developed for use in high-temperature, high-power, and/or high-radiation conditions under which conventional semiconductors cannot adequately perform. Silicon carbide's ability to function under such extreme conditions is expected to enable significant improvements to a far-ranging variety of applications and systems. These range from greatly improved high-voltage switching [1- 4] for energy savings in public electric power distribution and electric motor drives to more powerful microwave electronics for radar and communications [5-7] to sensors and controls for cleaner-burning more fuel-efficient jet aircraft and automobile engines. In the particular area of power devices, theoretical appraisals have indicated that SiC power MOSFET's and diode rectifiers would operate over higher voltage and temperature ranges, have superior switching characteristics, and yet have die sizes nearly 20 times smaller than correspondingly rated silicon-based devices [8]. However, these tremendous theoretical advantages have yet to be realized in experimental SiC devices, primarily due to the fact that SiC's relatively immature crystal growth and device fabrication technologies are not yet sufficiently developed to the degree required for reliable incorporation into most electronic systems [9]. This chapter briefly surveys the SiC semiconductor electronics technology. In particular, the differences (both good and bad) between SiC electronics technology and well-known silicon VLSI technology are highlighted. Projected performance benefits of SiC electronics are highlighted for several large-scale applications. Key crystal growth and device-fabrication issues that presently limit the performance and capability of high temperature and/or high power SiC electronics are identified.

Silicon Carbide Technology

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.

2006-01-01

Silicon carbide based semiconductor electronic devices and circuits are presently being developed for use in high-temperature, high-power, and high-radiation conditions under which conventional semiconductors cannot adequately perform. Silicon carbide's ability to function under such extreme conditions is expected to enable significant improvements to a far-ranging variety of applications and systems. These range from greatly improved high-voltage switching for energy savings in public electric power distribution and electric motor drives to more powerful microwave electronics for radar and communications to sensors and controls for cleaner-burning more fuel-efficient jet aircraft and automobile engines. In the particular area of power devices, theoretical appraisals have indicated that SiC power MOSFET's and diode rectifiers would operate over higher voltage and temperature ranges, have superior switching characteristics, and yet have die sizes nearly 20 times smaller than correspondingly rated silicon-based devices [8]. However, these tremendous theoretical advantages have yet to be widely realized in commercially available SiC devices, primarily owing to the fact that SiC's relatively immature crystal growth and device fabrication technologies are not yet sufficiently developed to the degree required for reliable incorporation into most electronic systems. This chapter briefly surveys the SiC semiconductor electronics technology. In particular, the differences (both good and bad) between SiC electronics technology and the well-known silicon VLSI technology are highlighted. Projected performance benefits of SiC electronics are highlighted for several large-scale applications. Key crystal growth and device-fabrication issues that presently limit the performance and capability of high-temperature and high-power SiC electronics are identified.

CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications.

PubMed

Hussain, Aftab M; Hussain, Muhammad M

2016-06-01

Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today's digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electronic consent channels: preserving patient privacy without handcuffing researchers.

PubMed

Shelton, Robert H

2011-02-09

Advances in health information technology and electronic medical records have the tremendous potential to accelerate translational and clinical research. However, privacy concerns threaten to be a rate-limiting factor. By recognizing and responding to patient privacy concerns, policy-makers, researchers, and information technology leaders have the opportunity to transform trial recruitment and make it safer to electronically locate and convey sensitive health information.

2+2 Electronics Technology. Looking Forward to the Future. A Model Secondary/Post-Secondary 2+2 Program To Prepare Students for Employment.

ERIC Educational Resources Information Center

Judson Independent School District, Converse, TX.

This document contains all pertinent information and essential background data necessary to implement the 2+2 electronics program at the high school level. An introduction describes development of the electronics technology 2+2 project that was a joint effort among San Antonio College and Judson, Northside, and North East Independent School…

Improving Patient Safety With the Military Electronic Health Record

DTIC Science & Technology

2005-01-01

Consolidated Health Informatics (CHI) project, one of the 24 electronic government ( eGov ) Internet- based technology initiatives supporting the president’s...United States Department of Defense (DoD) has transformed health care delivery in its use of information technology to automate patient data...use throughout the Federal Government . The importance of standards in EHR systems was further recognized in an IOM report, which stated, “Electronic

The electronic medical record in dermatology.

PubMed

Grosshandler, Joshua A; Tulbert, Brittain; Kaufmann, Mark D; Bhatia, Ashish; Brodell, Robert T

2010-09-01

Governmental incentives to stimulate the "meaningful use" of electronic medical records and future disincentives for Medicaid and Medicare provide an impetus for dermatologists to consider adding this technology to their clinical practice. Dermatologists should carefully weigh the pros and cons of establishing an electronic medical record system before incorporating this expensive technology. This article reviews available scientific and economic data required for dermatologists to help make an informed choice.

Electron Technology - ELTE 2013

NASA Astrophysics Data System (ADS)

Szczepański, Paweł; Kisiel, Ryszard; Romaniuk, Ryszard S.

2013-07-01

The paper presents a digest of chosen research and technical work results shown by researchers from technical universities, governmental institutes and research firms during the XIth Scientific Conference on Electron Technology ELTE 2013. ELTE Conference has been held every three years since more than three decades. The ELTE 2013 conference was held in Ryn Castle (Poland) on 16-20 April 2013 and gathered around 270 scientists, theoreticians, technologists and engineers from such areas as material engineering, chemistry, sensors, integrated circuits, electronics engineering, laser industry, photonics, etc. The conference featured the following major four topical sessions - Micro and Nano, Photonics, Materials and Technologies, and Microsystems; two dedicated sessions - a keynote plenary session on hot topics in electron technology, as well as a session on large research projects and grants realized by the relevant community. Oral topical sessions were accompanied by poster sessions. The paper is a succinct topical introduction to the volume of ELTE 2013 proceedings. Over 100 papers, gathered in the volume, present a very relevant cross section and state-of-the-art of this branch of science and technology in Poland with involved international co-operation.

All-printed capacitors with continuous solution dispensing technology

NASA Astrophysics Data System (ADS)

Ge, Yang; Plötner, Matthias; Berndt, Andreas; Kumar, Amit; Voit, Brigitte; Pospiech, Doris; Fischer, Wolf-Joachim

2017-09-01

Printed electronics have been introduced into the commercial markets in recent years. Various printing technologies have emerged aiming to process printed electronic devices with low cost, environmental friendliness, and compatibility with large areas and flexible substrates. The aim of this study is to propose a continuous solution dispensing technology for processing all-printed thin-film capacitors on glass substrates using a leading-edge printing instrument. Among all printing technologies, this study provides concrete proof of the following outstanding advantages of this technology: high tolerance to inks, high throughput, low cost, and precise pattern transfers. Ag nanoparticle ink based on glycol ethers was used to print the electrodes. To obtain dielectric ink, a copolymer powder of poly(methyl methacrylate-co-benzoylphenyl methacrylate) containing crosslinkable side groups was dissolved in anisole. Various layouts were designed to support multiple electronic applications. Scanning electron microscopy and atomic force microscopy were used to investigate the all-printed capacitor layers formed using the proposed process. Additionally, the printed capacitors were electrically characterized under direct current and alternating current. The measured electrical properties of the printed capacitors were consistent with the theoretical results.

Electronic commerce: beyond the euphoria.

PubMed

Healy, J L; DeLuca, J M

2000-01-01

As the center of considerable media attention, case study articles, vendor research, and development efforts, electronic commerce technology is entering healthcare and having a profound effect. The simple truth, however, is that after the drama and excitement begins to wear off, completing a successful e-commerce implementation remains good old-fashioned hard, sometimes monotonous work. To be successful, e-commerce technologies must be planned and implemented with rigorous project standards, and incorporated with significant process and workflow reengineering to actually return significant value to the organization. This article briefs readers on the organizational issues they must consider in evaluating e-commerce readiness--cultural, executive and technological factors that either support or inhibit project and technology success. Readers will be left with the tools to conduct an electronic commerce "readiness assessment" to evaluate the immediate, mid- and long-term potential of electronic commerce; practical remediation strategies for better preparing the organization for the changes inherent in moving to an e-commerce-enabled business model; and comments from the field--advice from organizations that have successfully implemented e-commerce technologies into their ongoing operations.

Information Delivery Options over Three Decades.

ERIC Educational Resources Information Center

Kennedy, H. E.

1986-01-01

Reviews the development of technological innovations in information delivery, including microforms, electronic processing, online distribution, full-text abstracts online, floppy disks, downloading, vertical integration, electronic publishing, and optical disks. The impact of technology on the information industry and the need to use technology…

National electronic medical records integration on cloud computing system.

PubMed

Mirza, Hebah; El-Masri, Samir

2013-01-01

Few Healthcare providers have an advanced level of Electronic Medical Record (EMR) adoption. Others have a low level and most have no EMR at all. Cloud computing technology is a new emerging technology that has been used in other industry and showed a great success. Despite the great features of Cloud computing, they haven't been utilized fairly yet in healthcare industry. This study presents an innovative Healthcare Cloud Computing system for Integrating Electronic Health Record (EHR). The proposed Cloud system applies the Cloud Computing technology on EHR system, to present a comprehensive EHR integrated environment.

Electron collisions with atoms, ions, molecules, and surfaces: Fundamental science empowering advances in technology

PubMed Central

Bartschat, Klaus; Kushner, Mark J.

2016-01-01

Electron collisions with atoms, ions, molecules, and surfaces are critically important to the understanding and modeling of low-temperature plasmas (LTPs), and so in the development of technologies based on LTPs. Recent progress in obtaining experimental benchmark data and the development of highly sophisticated computational methods is highlighted. With the cesium-based diode-pumped alkali laser and remote plasma etching of Si3N4 as examples, we demonstrate how accurate and comprehensive datasets for electron collisions enable complex modeling of plasma-using technologies that empower our high-technology–based society. PMID:27317740

Future Data Communication Architectures for Safety Critical Aircraft Cabin Systems

NASA Astrophysics Data System (ADS)

Berkhahn, Sven-Olaf

2012-05-01

The cabin of modern aircraft is subject to increasing demands for fast reconfiguration and hence flexibility. These demands require studies for new network architectures and technologies of the electronic cabin systems, which consider also weight and cost reductions as well as safety constraints. Two major approaches are in consideration to reduce the complex and heavy wiring harness: the usage of a so called hybrid data bus technology, which enables the common usage of the same data bus for several electronic cabin systems with different safety and security requirements and the application of wireless data transfer technologies for electronic cabin systems.

Electronic Medical Records and the Technological Imperative: The Retrieval of Dialogue in Community-Based Primary Care.

PubMed

Franz, Berkeley; Murphy, John W

2015-01-01

Electronic medical records are regarded as an important tool in primary health-care settings. Because these records are thought to standardize medical information, facilitate provider communication, and improve office efficiency, many practices are transitioning to these systems. However, much of the concern with improving the practice of record keeping has related to technological innovations and human-computer interaction. Drawing on the philosophical reflection raised in Jacques Ellul's work, this article questions the technological imperative that may be supporting medical record keeping. Furthermore, given the growing emphasis on community-based care, this article discusses important non-technological aspects of electronic medical records that might bring the use of these records in line with participatory primary-care medicine.

A comparison of superconductor and manganin technology for electronic links used in space mission applications

NASA Technical Reports Server (NTRS)

Caton, R.; Selim, R.; Buoncristiani, A. M.

1992-01-01

The electronic link connecting cryogenically cooled radiation detectors to data acquisition and signal processing electronics at higher temperatures contributes significantly to the total heat load on spacecraft cooling systems that use combined mechanical and cryogenic liquid cooling. Using high transition temperature superconductors for this link has been proposed to increase the lifetime of space missions. Herein, several YBCO (YBa2Cu3O7) superconductor-substrate combinations were examined and total heat loads were compared to manganin wire technology in current use. Using numerical solutions to the heat-flow equations, it is shown that replacing manganin technology with YBCO thick film technology can extend a 7-year mission by up to 1 year.

Methodological Variability Using Electronic Nose Technology For Headspace Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knobloch, Henri; Turner, Claire; Spooner, Andrew

Since the idea of electronic noses was published, numerous electronic nose (e-nose) developments and applications have been used in analyzing solid, liquid and gaseous samples in the food and automotive industry or for medical purposes. However, little is known about methodological pitfalls that might be associated with e-nose technology. Some of the methodological variation caused by changes in ambient temperature, using different filters and changes in mass flow rates are described. Reasons for a lack of stability and reproducibility are given, explaining why methodological variation influences sensor responses and why e-nose technology may not always be sufficiently robust for headspacemore » analysis. However, the potential of e-nose technology is also discussed.« less

Large-Scale Direct-Writing of Aligned Nanofibers for Flexible Electronics.

PubMed

Ye, Dong; Ding, Yajiang; Duan, Yongqing; Su, Jiangtao; Yin, Zhouping; Huang, Yong An

2018-05-01

Nanofibers/nanowires usually exhibit exceptionally low flexural rigidities and remarkable tolerance against mechanical bending, showing superior advantages in flexible electronics applications. Electrospinning is regarded as a powerful process for this 1D nanostructure; however, it can only be able to produce chaotic fibers that are incompatible with the well-patterned microstructures in flexible electronics. Electro-hydrodynamic (EHD) direct-writing technology enables large-scale deposition of highly aligned nanofibers in an additive, noncontact, real-time adjustment, and individual control manner on rigid or flexible, planar or curved substrates, making it rather attractive in the fabrication of flexible electronics. In this Review, the ground-breaking research progress in the field of EHD direct-writing technology is summarized, including a brief chronology of EHD direct-writing techniques, basic principles and alignment strategies, and applications in flexible electronics. Finally, future prospects are suggested to advance flexible electronics based on orderly arranged EHD direct-written fibers. This technology overcomes the limitations of the resolution of fabrication and viscosity of ink of conventional inkjet printing, and represents major advances in manufacturing of flexible electronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Towards a Chemiresistive Sensor-Integrated Electronic Nose: A Review

PubMed Central

Chiu, Shih-Wen; Tang, Kea-Tiong

2013-01-01

Electronic noses have potential applications in daily life, but are restricted by their bulky size and high price. This review focuses on the use of chemiresistive gas sensors, metal-oxide semiconductor gas sensors and conductive polymer gas sensors in an electronic nose for system integration to reduce size and cost. The review covers the system design considerations and the complementary metal-oxide-semiconductor integrated technology for a chemiresistive gas sensor electronic nose, including the integrated sensor array, its readout interface, and pattern recognition hardware. In addition, the state-of-the-art technology integrated in the electronic nose is also presented, such as the sensing front-end chip, electronic nose signal processing chip, and the electronic nose system-on-chip. PMID:24152879

Carbon nanotubes and graphene towards soft electronics

NASA Astrophysics Data System (ADS)

Chae, Sang Hoon; Lee, Young Hee

2014-04-01

Although silicon technology has been the main driving force for miniaturizing device dimensions to improve cost and performance, the current application of Si to soft electronics (flexible and stretchable electronics) is limited due to material rigidity. As a result, various prospective materials have been proposed to overcome the rigidity of conventional Si technology. In particular, nano-carbon materials such as carbon nanotubes (CNTs) and graphene are promising due to outstanding elastic properties as well as an excellent combination of electronic, optoelectronic, and thermal properties compared to conventional rigid silicon. The uniqueness of these nano-carbon materials has opened new possibilities for soft electronics, which is another technological trend in the market. This review covers the recent progress of soft electronics research based on CNTs and graphene. We discuss the strategies for soft electronics with nano-carbon materials and their preparation methods (growth and transfer techniques) to devices as well as the electrical characteristics of transparent conducting films (transparency and sheet resistance) and device performances in field effect transistor (FET) (structure, carrier type, on/off ratio, and mobility). In addition to discussing state of the art performance metrics, we also attempt to clarify trade-off issues and methods to control the trade-off on/off versus mobility). We further demonstrate accomplishments of the CNT network in flexible integrated circuits on plastic substrates that have attractive characteristics. A future research direction is also proposed to overcome current technological obstacles necessary to realize commercially feasible soft electronics.

Carbon nanotubes and graphene towards soft electronics.

PubMed

Chae, Sang Hoon; Lee, Young Hee

2014-01-01

Although silicon technology has been the main driving force for miniaturizing device dimensions to improve cost and performance, the current application of Si to soft electronics (flexible and stretchable electronics) is limited due to material rigidity. As a result, various prospective materials have been proposed to overcome the rigidity of conventional Si technology. In particular, nano-carbon materials such as carbon nanotubes (CNTs) and graphene are promising due to outstanding elastic properties as well as an excellent combination of electronic, optoelectronic, and thermal properties compared to conventional rigid silicon. The uniqueness of these nano-carbon materials has opened new possibilities for soft electronics, which is another technological trend in the market. This review covers the recent progress of soft electronics research based on CNTs and graphene. We discuss the strategies for soft electronics with nano-carbon materials and their preparation methods (growth and transfer techniques) to devices as well as the electrical characteristics of transparent conducting films (transparency and sheet resistance) and device performances in field effect transistor (FET) (structure, carrier type, on/off ratio, and mobility). In addition to discussing state of the art performance metrics, we also attempt to clarify trade-off issues and methods to control the trade-off on/off versus mobility). We further demonstrate accomplishments of the CNT network in flexible integrated circuits on plastic substrates that have attractive characteristics. A future research direction is also proposed to overcome current technological obstacles necessary to realize commercially feasible soft electronics.

The Study of the Application Rate of Effective Learning Technologies in Self-Regulation of KFU and VIIU Students

ERIC Educational Resources Information Center

Khuziakhmetov, Anvar N.; Amin, Azimi Sayed

2015-01-01

The aim of the present research is the study of the application rate of learning technologies in KFU and VIIU electronic courses to improve students' self-regulation. For this aim, this research was based on Kitsantas research, the rate of the use of effective learning technologies in students' self-regulation in electronic courses in these two…

Exposure assessment of workers in printed electronics workplace.

PubMed

Lee, Ji Hyun; Sohn, Eun Kyung; Ahn, Jin Soo; Ahn, Kangho; Kim, Keun Soo; Lee, Jong Hwan; Lee, Taik Min; Yu, Il Je

2013-07-01

Printed electronics uses converging technologies, such as printing, fine mechanics, nanotechnology, electronics and other new technologies. Consequently, printed electronics raises additional health and safety concerns to those experienced in the traditional printing industry. This study investigated two printed electronics workplaces based on a walk-through survey and personal and area sampling. All the printed electronics operations were conducted in a cleanroom. No indication of exposure to excess silver nanoparticles or carbon nanotubes (CNTs) was found. While the organic solvents were lower than current occupational exposure limits, there was a lack of engineering controls, such as local exhaust ventilation, correct enclosure and duct connections. There was also an insufficient quantity of personal protective equipment, and some organic solvents not described in the safety data sheets (SDSs) were detected in the air samples. Plus, the cleaning work, a major emissions operation, was not conducted within a hood, and the cleaning waste was not properly disposed of. Therefore, the present exposure assessment results from two printed electronics workplaces suggest that the printed electronics industry needs to take note of the occupational safety and health risks and hazards already established by the traditional printing industry, along with new risks and hazards originating from converging technologies such as nanotechnology.

29 CFR 1615.102 - Application.

Code of Federal Regulations, 2011 CFR

2011-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.102 Application. This part applies to all programs or activities conducted by the Commission and to its development, procurement, maintenance, and use of electronic and information technology. [73 FR 39866, July 11, 2008] ...

29 CFR 1615.102 - Application.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.102 Application. This part applies to all programs or activities conducted by the Commission and to its development, procurement, maintenance, and use of electronic and information technology. [73 FR 39866, July 11, 2008] ...

29 CFR 1615.102 - Application.

Code of Federal Regulations, 2013 CFR

2013-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.102 Application. This part applies to all programs or activities conducted by the Commission and to its development, procurement, maintenance, and use of electronic and information technology. [73 FR 39866, July 11, 2008] ...

29 CFR 1615.102 - Application.

Code of Federal Regulations, 2014 CFR

2014-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.102 Application. This part applies to all programs or activities conducted by the Commission and to its development, procurement, maintenance, and use of electronic and information technology. [73 FR 39866, July 11, 2008] ...

29 CFR 1615.102 - Application.

Code of Federal Regulations, 2012 CFR

2012-07-01

... COMMISSION AND IN ACCESSIBILITY OF COMMISSION ELECTRONIC AND INFORMATION TECHNOLOGY § 1615.102 Application. This part applies to all programs or activities conducted by the Commission and to its development, procurement, maintenance, and use of electronic and information technology. [73 FR 39866, July 11, 2008] ...

The Integrity of Digital Information: Mechanics and Definitional Issues.

ERIC Educational Resources Information Center

Lynch, Clifford A.

1994-01-01

Considers issues regarding the migration of a system of literature into electronic formats. Highlights include integrity in an information distribution system; digest technology; tracings that permit detection of copied digital objects; verifying sources; digital signature technology and cryptography; electronic publishing; and intellectual…

75 FR 48366 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

...: OMB Desk Officer for the Department of Labor--Mine Safety and Health Administration (MSHA), Office of..., electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Agency: Mine Safety and Health Administration...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

Planning, Using the New Technology in Classrooms.

ERIC Educational Resources Information Center

Barker, Bruce O.

1990-01-01

"Technology talk" among progressive administrators includes more than just computers and VCRs. New telecommunications developments (in satellites, fiber optics, electronic bulletin boards, electronic mail, and two-way interactive instructional delivery) are "hot topics" that both principals and teachers must learn about. Peer interactions and…

NASA Tech Briefs, April 1989. Volume 13, No. 4

NASA Technical Reports Server (NTRS)

1989-01-01

A special feature of this issue is an article about the evolution of high technology in Texas. Topics include: Electronic Components & and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences.

Modern Microwave and Millimeter-Wave Power Electronics

NASA Astrophysics Data System (ADS)

Barker, Robert J.; Luhmann, Neville C.; Booske, John H.; Nusinovich, Gregory S.

2005-04-01

A comprehensive study of microwave vacuum electronic devices and their current and future applications While both vacuum and solid-state electronics continue to evolve and provide unique solutions, emerging commercial and military applications that call for higher power and higher frequencies to accommodate massive volumes of transmitted data are the natural domain of vacuum electronics technology. Modern Microwave and Millimeter-Wave Power Electronics provides systems designers, engineers, and researchers-especially those with primarily solid-state training-with a thoroughly up-to-date survey of the rich field of microwave vacuum electronic device (MVED) technology. This book familiarizes the R&D and academic communities with the capabilities and limitations of MVED and highlights the exciting scientific breakthroughs of the past decade that are dramatically increasing the compactness, efficiency, cost-effectiveness, and reliability of this entire class of devices. This comprehensive text explores a wide range of topics: * Traveling-wave tubes, which form the backbone of satellite and airborne communications, as well as of military electronic countermeasures systems * Microfabricated MVEDs and advanced electron beam sources * Klystrons, gyro-amplifiers, and crossed-field devices * "Virtual prototyping" of MVEDs via advanced 3-D computational models * High-Power Microwave (HPM) sources * Next-generation microwave structures and circuits * How to achieve linear amplification * Advanced materials technologies for MVEDs * A Web site appendix providing a step-by-step walk-through of a typical MVED design process Concluding with an in-depth examination of emerging applications and future possibilities for MVEDs, Modern Microwave and Millimeter-Wave Power Electronics ensures that systems designers and engineers understand and utilize the significant potential of this mature, yet continually developing technology. SPECIAL NOTE: All of the editors' royalties realized from the sale of this book will fund the future research and publication activities of graduate students in the vacuum electronics field.

Progress on complementary patterning using plasmon-excited electron beamlets (Conference Presentation)

NASA Astrophysics Data System (ADS)

Du, Zhidong; Chen, Chen; Pan, Liang

2017-04-01

Maskless lithography using parallel electron beamlets is a promising solution for next generation scalable maskless nanolithography. Researchers have focused on this goal but have been unable to find a robust technology to generate and control high-quality electron beamlets with satisfactory brightness and uniformity. In this work, we will aim to address this challenge by developing a revolutionary surface-plasmon-enhanced-photoemission (SPEP) technology to generate massively-parallel electron beamlets for maskless nanolithography. The new technology is built upon our recent breakthroughs in plasmonic lenses, which will be used to excite and focus surface plasmons to generate massively-parallel electron beamlets through photoemission. Specifically, the proposed SPEP device consists of an array of plasmonic lens and electrostatic micro-lens pairs, each pair independently producing an electron beamlet. During lithography, a spatial optical modulator will dynamically project light onto individual plasmonic lenses to control the switching and brightness of electron beamlets. The photons incident onto each plasmonic lens are concentrated into a diffraction-unlimited spot as localized surface plasmons to excite the local electrons to near their vacuum levels. Meanwhile, the electrostatic micro-lens extracts the excited electrons to form a focused beamlet, which can be rastered across a wafer to perform lithography. Studies showed that surface plasmons can enhance the photoemission by orders of magnitudes. This SPEP technology can scale up the maskless lithography process to write at wafers per hour. In this talk, we will report the mechanism of the strong electron-photon couplings and the locally enhanced photoexcitation, design of a SPEP device, overview of our proof-of-concept study, and demonstrated parallel lithography of 20-50 nm features.

Communication technology and social media: opportunities and implications for healthcare systems.

PubMed

Weaver, Betsy; Lindsay, Bill; Gitelman, Betsy

2012-09-30

Electronic patient education and communications, such as email, text messaging, and social media, are on the rise in healthcare today. This article explores potential uses of technology to seek solutions in healthcare for such challenges as modifying behaviors related to chronic conditions, improving efficiency, and decreasing costs. A brief discussion highlights the role of technologies in healthcare informatics and considers two theoretical bases for technology implementation. Discussion focuses more extensively on the ability and advantages of electronic communication technology, such as e-mail, social media, text messaging, and electronic health records, to enhance patient-provider e-communications in nursing today. Effectiveness of e-communication in healthcare is explored, including recent and emerging applications designed to improve patient-provider connections and review of current evidence supporting positive outcomes. The conclusion addresses the vision of nurses' place in the vanguard of these developments.

Exploring faculty perceptions towards electronic health records for nursing education.

PubMed

Kowitlawakul, Y; Chan, S W C; Wang, L; Wang, W

2014-12-01

The use of electronic health records in nursing education is rapidly increasing worldwide. The successful implementation of electronic health records for nursing education software program relies on students as well as nursing faculty members. This study aimed to explore the experiences and perceptions of nursing faculty members using electronic health records for nursing education software program, and to identify the influential factors for successful implementation of this technology. This exploratory qualitative study was conducted using in-depth individual interviews at a university in Singapore. Seven faculty members participated in the study. The data were gathered and analysed at the end of the semester in the 2012/2013 academic year. The participants' perceptions of the software program were organized into three main categories: innovation, transition and integration. The participants perceived this technology as innovative, with both values and challenges for the users. In addition, using the new software program was perceived as transitional process. The integration of this technology required time from faculty members and students, as well as support from administrators. The software program had only been implemented for 2-3 months at the time of the interviews. Consequently, the participants might have lacked the necessary skill and competence and confidence to implement it successfully. In addition, the unequal exposure to the software program might have had an impact on participants' perceptions. The findings show that the integration of electronic health records into nursing education curricula is dependent on the faculty members' experiences with the new technology, as well as their perceptions of it. Hence, cultivating a positive attitude towards the use of new technologies is important. Electronic health records are significant applications of health information technology. Health informatics competency should be included as a required competency component in faculty professional development policy and programmes. © 2014 International Council of Nurses.

Doping of wide-bandgap titanium-dioxide nanotubes: optical, electronic and magnetic properties

NASA Astrophysics Data System (ADS)

Alivov, Yahya; Singh, Vivek; Ding, Yuchen; Cerkovnik, Logan Jerome; Nagpal, Prashant

2014-08-01

Doping semiconductors is an important step for their technological application. While doping bulk semiconductors can be easily achieved, incorporating dopants in semiconductor nanostructures has proven difficult. Here, we report a facile synthesis method for doping titanium-dioxide (TiO2) nanotubes that was enabled by a new electrochemical cell design. A variety of optical, electronic and magnetic dopants were incorporated into the hollow nanotubes, and from detailed studies it is shown that the doping level can be easily tuned from low to heavily-doped semiconductors. Using desired dopants - electronic (p- or n-doped), optical (ultraviolet bandgap to infrared absorption in co-doped nanotubes), and magnetic (from paramagnetic to ferromagnetic) properties can be tailored, and these technologically important nanotubes can be useful for a variety of applications in photovoltaics, display technologies, photocatalysis, and spintronic applications.Doping semiconductors is an important step for their technological application. While doping bulk semiconductors can be easily achieved, incorporating dopants in semiconductor nanostructures has proven difficult. Here, we report a facile synthesis method for doping titanium-dioxide (TiO2) nanotubes that was enabled by a new electrochemical cell design. A variety of optical, electronic and magnetic dopants were incorporated into the hollow nanotubes, and from detailed studies it is shown that the doping level can be easily tuned from low to heavily-doped semiconductors. Using desired dopants - electronic (p- or n-doped), optical (ultraviolet bandgap to infrared absorption in co-doped nanotubes), and magnetic (from paramagnetic to ferromagnetic) properties can be tailored, and these technologically important nanotubes can be useful for a variety of applications in photovoltaics, display technologies, photocatalysis, and spintronic applications. Electronic supplementary information (ESI) available: See DOI: 10.1039/c4nr02417f

Accessibility of electronically mediated education: policy issues.

PubMed

Blair, Martin E; Goldmann, Hilary; Relton, Joy

2004-01-01

Electronic technology has transformed education systems over the past 30 years. Generally speaking, technology has been an incredible benefit for individuals with disabilities. However, the use of technology, particularly in education, has been sometimes discriminatory toward those who are unable to interact with it in the standard ways anticipated by its inventors. Disability policies have attempted to address issues of equality of opportunity for all citizens, but application of these policies to rapidly evolving technology has been difficult. In this article we provide a brief review of disability policy as it pertains to education. We also review several current policy initiatives related to higher education information technology--all of which pertain to public kindergarten through 12th-grade education. We raise questions that arise when careful thought is given to ways in which disability, education, and technology policies overlap. We anticipate that these next few pages will generate dialogue among researchers, policy makers, educators, technology engineers, and others interested in how electronically mediated education affects individuals with disabilities and how it can be used to ensure equal access to the educational benefits available in schools protected by U.S. civil rights legislation.

Body of Knowledge for Silicon Carbide Power Electronics

NASA Technical Reports Server (NTRS)

Boomer, Kristen; Lauenstein, Jean-Marie; Hammoud, Ahmad

2016-01-01

Wide band gap semiconductors, such as silicon carbide (SiC), have emerged as very promising materials for future electronic components due to the tremendous advantages they offer in terms of power capability, extreme temperature tolerance, and high frequency operation. This report documents some issues pertaining to SiC technology and its application in the area of power electronics, in particular those geared for space missions. It also serves as a body of knowledge (BOK) in reference to the development and status of this technology obtained via literature and industry survey as well as providing a listing of the major manufacturers and their capabilities. Finally, issues relevant to the reliability of SiC-based electronic parts are addressed and limitations affecting the full utilization of this technology are identified.

Advanced Electronic Systems. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Patrick, Dale R.

This curriculum for a 1-semester or 1-year course in electronics is designed to take students from basic through advanced electronic systems. It covers several electronic areas, such as digital electronics, communication electronics, industrial process control, instrumentation, programmable controllers, and robotics. The guide contains…

Attosecond electron pulse trains and quantum state reconstruction in ultrafast transmission electron microscopy

NASA Astrophysics Data System (ADS)

Priebe, Katharina E.; Rathje, Christopher; Yalunin, Sergey V.; Hohage, Thorsten; Feist, Armin; Schäfer, Sascha; Ropers, Claus

2017-12-01

Ultrafast electron and X-ray imaging and spectroscopy are the basis for an ongoing revolution in the understanding of dynamical atomic-scale processes in matter. The underlying technology relies heavily on laser science for the generation and characterization of ever shorter pulses. Recent findings suggest that ultrafast electron microscopy with attosecond-structured wavefunctions may be feasible. However, such future technologies call for means to both prepare and fully analyse the corresponding free-electron quantum states. Here, we introduce a framework for the preparation, coherent manipulation and characterization of free-electron quantum states, experimentally demonstrating attosecond electron pulse trains. Phase-locked optical fields coherently control the electron wavefunction along the beam direction. We establish a new variant of quantum state tomography—`SQUIRRELS'—for free-electron ensembles. The ability to tailor and quantitatively map electron quantum states will promote the nanoscale study of electron-matter entanglement and new forms of ultrafast electron microscopy down to the attosecond regime.

Developments in Radiation-Hardened Electronics Applicable to the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Frazier, Donald O.; Patrick , Marshall C.; Watson, Michael D.; Johnson, Michael A.; Cressler, John D.; Kolawa, Elizabeth A.

2007-01-01

The Radiation Hardened Electronics for Space Exploration (RHESE) project develops the advanced technologies required to produce radiation hardened electronics, processors, and devices in support of the anticipated requirements of NASA's Constellation program. Methods of protecting and hardening electronics against the encountered space environment are discussed. Critical stages of a spaceflight mission that are vulnerable to radiation-induced interruptions or failures are identified. Solutions to mitigating the risk of radiation events are proposed through the infusion of RHESE technology products and deliverables into the Constellation program's spacecraft designs.

Advanced X-Ray Sources Ensure Safe Environments

NASA Technical Reports Server (NTRS)

2008-01-01

Ames Research Center awarded inXitu Inc. (formerly Microwave Power Technology), of Mountain View, California, an SBIR contract to develop a new design of electron optics for forming and focusing electron beams that is applicable to a broad class of vacuum electron devices. This technology offers an inherently rugged and more efficient X-ray source for material analysis; a compact and rugged X-ray source for smaller rovers on future Mars missions; and electron beam sources to reduce undesirable emissions from small, widely distributed pollution sources; and remediation of polluted sites.

Utilizing Technology to Enhance Learning Environments: The Net Gen Student

ERIC Educational Resources Information Center

Muhammad, Amanda J.; Mitova, Mariana A.; Wooldridge, Deborah G.

2016-01-01

It is essential for instructors to understand the importance of classroom technology so they can prepare to use it to personalize students' learning. Strategies for choosing effective electronic tools are presented, followed by specific suggestions for designing enhanced personalized learning using electronic tools.

Future Applications of Electronic Technology to Education.

ERIC Educational Resources Information Center

Lewis, Arthur J.; And Others

Developments in electronic technology that have improved and linked together telecommunication and computers are discussed, as well as their use in instruction, implications of this use, and associated issues. The first section briefly describes the following developments: microcomputers and microprocessors, bubble memory, lasers, holography,…

Electronic Warfare / Electronic Protection (EW/EP) S&T Priority Steering Council

DTIC Science & Technology

2011-11-08

Office Office of the Assistant Secretary of Defense (Research and Engineering) NDIA 8th Annual Disruptive Technologies Conference 8 November 2011...the NDIA Disruptive Technologies Conference, November 8, 2011 Washington, DC 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17

Electricity/Electronics. Career Education Guide.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

The curriculum guide is designed to provide high school students with realistic training in electricity/electronics theory and practice and to prepare them for entry into an occupation or continuing postsecondary education. The learning modules are grouped into three areas: electrical technology, radio-television technology, and industrial…

The Electronic Supervisor: New Technology, New Tensions.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

Computer technology has made it possible for employers to collect and analyze management information about employees' work performance and equipment use. There are three main tools for supervising office activities. Computer-based (electronic) monitoring systems automatically record statistics about the work of employees using computer or…

Instructional Systems Study, Electronics Technology.

ERIC Educational Resources Information Center

Waukesha County Technical Inst., Waukesha, WI.

Because of shortcomings in the traditional approach to instruction and learning at Waukesha County Technical Institute in Wisconsin, this research was conducted to determine the effectiveness of an alternate approach to instruction in electronics technology. The "Closed Loop Systems Approach to Instruction" developed for this study was derived…

Why Use Technology?

ERIC Educational Resources Information Center

Peck, Kyle L.; Dorricott, Denise

1994-01-01

While businesses have been building electronic highways, education is traveling an electronic dirt road. There are 10 reasons for using technology in classrooms. Students learn and develop at different rates. Graduates must be globally aware, proficient at accessing, evaluating, and communicating information, and adept at solving complex problems.…

Recent progress in OLED and flexible displays and their potential for application to aerospace and military display systems

NASA Astrophysics Data System (ADS)

Sarma, Kalluri

2015-05-01

Organic light emitting diode (OLED) display technology has advanced significantly in recent years and it is increasingly being adapted in consumer electronics products with premium performance, such as high resolution smart phones, Tablet PCs and TVs. Even flexible OLED displays are beginning to be commercialized in consumer electronic devices such as smart phones and smart watches. In addition to the advances in OLED emitters, successful development and adoption of OLED displays for premium performance applications relies on the advances in several enabling technologies including TFT backplanes, pixel drive electronics, pixel patterning technologies, encapsulation technologies and system level engineering. In this paper we will discuss the impact of the recent advances in LTPS and AOS TFTs, R, G, B and White OLED with color filter pixel architectures, and encapsulation, on the success of the OLEDs in consumer electronic devices. We will then discuss potential of these advances in addressing the requirements of OLED and flexible displays for the military and avionics applications.

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Polished sample preparing and backscattered electron imaging and of fly ash-cement paste

NASA Astrophysics Data System (ADS)

Feng, Shuxia; Li, Yanqi

2018-03-01

In recent decades, the technology of backscattered electron imaging and image analysis was applied in more and more study of mixed cement paste because of its special advantages. Test accuracy of this technology is affected by polished sample preparation and image acquisition. In our work, effects of two factors in polished sample preparing and backscattered electron imaging were investigated. The results showed that increasing smoothing pressure could improve the flatness of polished surface and then help to eliminate interference of morphology on grey level distribution of backscattered electron images; increasing accelerating voltage was beneficial to increase gray difference among different phases in backscattered electron images.

Microelectronics in Japan

NASA Astrophysics Data System (ADS)

Boulton, William R.

1995-02-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Microelectronics in Japan

NASA Technical Reports Server (NTRS)

Boulton, William R.

1995-01-01

The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

Technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

NASA Astrophysics Data System (ADS)

Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał

2013-07-01

The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.

Materials and applications of bioresorbable electronics

NASA Astrophysics Data System (ADS)

Huang, Xian

2018-01-01

Bioresorbable electronics is a new type of electronics technology that can potentially lead to biodegradable and dissolvable electronic devices to replace current built-to-last circuits predominantly used in implantable devices and consumer electronics. Such devices dissolve in an aqueous environment in time periods from seconds to months, and generate biological safe products. This paper reviews materials, fabrication techniques, and applications of bioresorbable electronics, and aims to inspire more revolutionary bioresorbable systems that can generate broader social and economic impact. Existing challenges and potential solutions in developing bioresorbable electronics have also been presented to arouse more joint research efforts in this field to build systematic technology framework. Project supported by the National Natural Science Foundation of China (No. 61604108) and the Natural Science Foundation of Tianjin (No. 16JCYBJC40600).

The need to incorporate health information technology into physicians' education and professional development.

PubMed

Graham-Jones, Pierce; Jain, Sachin H; Friedman, Charles P; Marcotte, Leah; Blumenthal, David

2012-03-01

Nationwide, as physicians and health care systems adopt electronic health records, health information technology is becoming integral to the practice of medicine. But current medical education and professional development curricula do not systematically prepare physicians to use electronic health records and the data these systems collect. We detail how training in meaningful use of electronic health records could be incorporated into physician training, from medical school, through licensure and board certification, to continuing medical education and the maintenance of licensure and board certification. We identify six near-term opportunities for professional organizations to accelerate the integration of health information technology into their requirements.

Dose properties of a laser accelerated electron beam and prospects for clinical application.

PubMed

Kainz, K K; Hogstrom, K R; Antolak, J A; Almond, P R; Bloch, C D; Chiu, C; Fomytskyi, M; Raischel, F; Downer, M; Tajima, T

2004-07-01

Laser wakefield acceleration (LWFA) technology has evolved to where it should be evaluated for its potential as a future competitor to existing technology that produces electron and x-ray beams. The purpose of the present work is to investigate the dosimetric properties of an electron beam that should be achievable using existing LWFA technology, and to document the necessary improvements to make radiotherapy application for LWFA viable. This paper first qualitatively reviews the fundamental principles of LWFA and describes a potential design for a 30 cm accelerator chamber containing a gas target. Electron beam energy spectra, upon which our dose calculations are based, were obtained from a uniform energy distribution and from two-dimensional particle-in-cell (2D PIC) simulations. The 2D PIC simulation parameters are consistent with those reported by a previous LWFA experiment. According to the 2D PIC simulations, only approximately 0.3% of the LWFA electrons are emitted with an energy greater than 1 MeV. We studied only the high-energy electrons to determine their potential for clinical electron beams of central energy from 9 to 21 MeV. Each electron beam was broadened and flattened by designing a dual scattering foil system to produce a uniform beam (103%>off-axis ratio>95%) over a 25 x 25 cm2 field. An energy window (deltaE) ranging from 0.5 to 6.5 MeV was selected to study central-axis depth dose, beam flatness, and dose rate. Dose was calculated in water at a 100 cm source-to-surface distance using the EGS/BEAM Monte Carlo algorithm. Calculations showed that the beam flatness was fairly insensitive to deltaE. However, since the falloff of the depth-dose curve (R10-R90) and the dose rate both increase with deltaE, a tradeoff between minimizing (R10-R90) and maximizing dose rate is implied. If deltaE is constrained so that R10-R90 is within 0.5 cm of its value for a monoenergetic beam, the maximum practical dose rate based on 2D PIC is approximately 0.1 Gy min(-1) for a 9 MeV beam and 0.03 Gy min(-1) for a 15 MeV beam. It was concluded that current LWFA technology should allow a table-top terawatt (T3) laser to produce therapeutic electron beams that have acceptable flatness, penetration, and falloff of depth dose; however, the dose rate is still 1%-3% of that which would be acceptable, especially for higher-energy electron beams. Further progress in laser technology, e.g., increasing the pulse repetition rate or number of high energy electrons generated per pulse, is necessary to give dose rates acceptable for electron beams. Future measurements confirming dosimetric calculations are required to substantiate our results. In addition to achieving adequate dose rate, significant engineering developments are needed for this technology to compete with current electron acceleration technology. Also, the functional benefits of LWFA electron beams require further study and evaluation.

Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.

2000-09-01

This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices andmore » other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.« less

A silicon-on-insulator complementary-metal-oxide-semiconductor compatible flexible electronics technology

NASA Astrophysics Data System (ADS)

Tu, Hongen; Xu, Yong

2012-07-01

This paper reports a simple flexible electronics technology that is compatible with silicon-on-insulator (SOI) complementary-metal-oxide-semiconductor (CMOS) processes. Compared with existing technologies such as direct fabrication on flexible substrates and transfer printing, the main advantage of this technology is its post-SOI-CMOS compatibility. Consequently, high-performance and high-density CMOS circuits can be first fabricated on SOI wafers using commercial foundry and then be integrated into flexible substrates. The yield is also improved by eliminating the transfer printing step. Furthermore, this technology allows the integration of various sensors and microfluidic devices. To prove the concept of this technology, flexible MOSFETs have been demonstrated.

48 CFR 23.705 - Electronic products environmental assessment tool.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REGULATION SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES... standard for personal computer products— (i) Was issued by the Institute of Electrical and Electronics.... 104-113, the “National Technology Transfer and Advancement Act of 1995”, (see 11.102(c)); (iii) Meets...

What Does Electronic Conferencing Afford Distance Education?

ERIC Educational Resources Information Center

Barnes, Sally

2000-01-01

Discusses the use of technology for distance learning in higher education and examines the similarities and differences between face-to-face seminars and online discussions. Considers the concept of affordance in relation to information and communication technologies and distance education; and examines affordances of electronic conferencing and…

Power Electronics Packaging Reliability | Transportation Research | NREL

Science.gov Websites

interface materials, are a key enabling technology for compact, lightweight, low-cost, and reliable power , reliability, and cost. High-temperature bonded interface materials are an important facilitating technology for compact, lightweight, low-cost, reliable power electronics packaging that fully utilizes the

Directed Energy Weapon System for Ballistic Missile Defense

DTIC Science & Technology

2009-02-15

Scientific Assessment of High Power Free - Electron Laser Technology , “Introduction and Principle Findings,” available at: http://www.nap.edu/catalog...will lead to thermal blooming and will reduce the energy of light to the target. Scientific Assessment of High Power Free - Electron Laser Technology , pg

Newspapers and Electronic Databases: Present Technology.

ERIC Educational Resources Information Center

Newcombe, Barbara; Trivedi, Harish

1984-01-01

Discusses technology used to preserve, control, index, and retrieve information in newspapers, highlighting ways to record analyses of news stories, storage/indexing systems based on computers, information as salable commodity, preparation of news for electronic storage, answering in-house queries, questions of copyright and invasion of privacy,…

Hearing Impairments. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on advances in electronic aids, computers, telecommunications, and videodiscs to assist students with hearing impairments. Electronic aids include hearing aids, telephone devices for the deaf, teletypes, closed captioning systems for television, and…

A Motor Drive Electronics Assembly for Mars Curiosity Rover: An Example of Assembly Qualification for Extreme Environments

NASA Technical Reports Server (NTRS)

Kolawa, Elizabeth; Chen, Yuan; Mojarradi, Mohammad M.; Tudryn Weber, Carissa

2013-01-01

In this paper, the technology development and infusion of the motor drive electronics assembly, along with the technology qualification and space qualification, is described and detailed. The process is an example of the qualification methodology for extreme environmen

Crocodile Technology. [CD-ROM].

ERIC Educational Resources Information Center

2000

This high school physics computer software resource is a systems and control simulator that covers the topics of electricity, electronics, mechanics, and programming. Circuits can easily be simulated on the screen and electronic and mechanical components can be combined. In addition to those provided in Crocodile Technology, a student can create…

Electronic Performance Support Systems and Technological Literacy

ERIC Educational Resources Information Center

Maughan, George R.

2005-01-01

Electronic performance support systems (EPSS) can provide alternative learning opportunities to supplement traditional classroom or training strategies. Today's students may benefit from educational settings and strategies that they will use in the future. In using EPSS to nurture the development of technological literacy, workers and students can…

The Road Ahead: State of the Industry 2001.

ERIC Educational Resources Information Center

Kiser, Kim

2001-01-01

Presents results of a survey of electronic learning that investigated how organizations are using electronic learning, the technology being used to deliver it, and whether it's helping to accomplish goals. Highlights include convenience; learning management systems; use of technology for training; satisfaction; effectiveness; support and spending;…

International Competitiveness in Electronics.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This assessment continues the Office of Technology Assessment's (OTA) exploration of the meaning of industrial policy in the United States context, while also examining the industrial policies of several U.S. economic rivals. The major focus is on electronics, an area which virtually defines "high technology" of the 1980's. The…

Principled Libraries: Finding Stability in Changing Times.

ERIC Educational Resources Information Center

Crawford, Walt

2000-01-01

Discusses the transition that libraries are currently experiencing between physical resources and electronic access. Topics include technology as tools rather than solutions; media and technology; desktop publishing; electronic books; Web commerce; instant books, or books printed on demand; new types of media; and serving the users. (LRW)

48 CFR 23.704 - Electronic products environmental assessment tool.

Code of Federal Regulations, 2011 CFR

2011-10-01

... REGULATION SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES... standard for personal computer products— (i) Was issued by the Institute of Electrical and Electronics.... 104-113, the “National Technology Transfer and Advancement Act of 1995”, (see 11.102(c)); (iii) Meets...

48 CFR 23.704 - Electronic product environmental assessment tool.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REGULATION SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES... Electrical and Electronics Engineers, Inc., on March 5, 2010; October 19, 2012, and October 19, 2012.... 272 note), the “National Technology Transfer and Advancement Act of 1995,” (see 11.102(c)); (iii...

48 CFR 23.704 - Electronic products environmental assessment tool.

Code of Federal Regulations, 2012 CFR

2012-10-01

... REGULATION SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES... standard for personal computer products— (i) Was issued by the Institute of Electrical and Electronics.... 104-113, the “National Technology Transfer and Advancement Act of 1995”, (see 11.102(c)); (iii) Meets...

77 FR 65900 - Agency Information Collection Activities: Extension, With Change, of an Existing Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... technological collection techniques or other forms of information technology, e.g., permitting electronic... Information Collection Activities: Extension, With Change, of an Existing Information Collection; Comment Request ACTION: 30-Day Notice of Information Collection for Review; File No. 10-002, Electronic Funds...

The Accessible Future.

ERIC Educational Resources Information Center

National Council on Disability, Washington, DC.

The fourth in a series on implementation and enforcement of major civil rights laws relating to Americans with disabilities, this report looks at how such enforcement relates to electronic and information technology. As used in this report, Electronic and Information Technology (E&IT) particularly involves the Internet, the World Wide Web, and…

Hepatotoxicity of illegal home-made alcohols.

PubMed

Gökce, Hasan; Akcan, Ramazan; Celikel, Adnan; Zeren, Cem; Ortanca, Ibrahim; Demirkiran, Sumeyra

2016-10-01

Alcohol-related hepatotoxicity is not only caused by excessive alcohol consumption but also caused and even accelerated by hepatotoxic ingredients other than ethanol. Concentrations of hepatotoxic substances might be significantly high, particularly in illegally produced home-made alcohols. In this study we aim to analyze the hepatotoxic effects of a home-made alcohol traditionally called "bogma raki" in Turkey. Fifty Wistar albino male rats were used. Five groups were randomly formed with ten animals in each. Besides laboratory diets, groups were fed as follows: Group 1 (control group) distilled water; Group 2 bogma raki with distilled water (%44 (v/v), 9.2 ml/kg/day); Group 3 bogma raki with distilled water (%44 (v/v), 9.2 ml/kg/day)+walnut (10 g/kg/day); Group 4 whisky with distilled water (%40 (v/v), 9.2 ml/kg/day); Group 5 distilled water + walnut (10 g/kg/day), for 28 days. The toxicological analysis of The spirits were analyzed using Hewlett-Packard (Palo Alto, CA) GC/MS system with HP 6890 gas chromatograph, an HP 5972 mass selective detector (MSD) and an HP 6890 automatic liquid sampler GC/MS; the pressure of the carrier gas helium was 6.0 bar and the split value with a ratio of 1:100. The injection unit temperature set to 250 °C and MS quadrupole temperature set to 280 °C. The MS quadrupole detector ionization energy set to 70 eV. The initial column temperature was 60 °C (for 4 min) programmed by 6 °C/min to final temperature 160 °C and kept for 8 min at 160 °C. Utilized whisky and bogma raki samples were analyzed for the amounts of trans-anethole, ethanol, methanol, 1-propanolol, butanol, 2-butanol, 2-methyl-1-propanolol (isobutanol) and 3-methylbutanol (isoamyl alcohol). Histopathological changes in liver tissues were graded as follows; normal = 0 (<10%), mild = 1 (10%-40%), moderate = 2 (40%-70%), severe = 3 (above 70%). Chemical composition of illegally produced raki sample (%v/v) was as follows: trans-anethole %1.93, ethanol %95.70, 2-methyl-1-propanolol (isobutanol) %0.19, asetic acid %0.25, 3-methylbutanol (isoamyl alcohol) %0.77, and others %1.16. Chemical composition of commercial whisky sample (%v/v) was as follows: ethanol %97.72, 2-methyl-1-propanolol (isobutanol) %0.57, asetic acid %0.23, 3-methylbutanol (isoamyl alcohol) %1.28, and others %0.2. No traces of trans-anethole were detected in whisky. Normal liver morphology was recorded in control and walnut groups. However, bogma raki caused significant congestion and inflammatory cell infiltration compared to control and walnut group. On the other hand, whisky administration caused mild degeneration including inflammation in a limited area. Obtained findings suggest that trans-anethole containing alcoholic beverages are more hepatotoxic compared to commercial alcoholic beverages. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Woven electronics: a new perspective for wearable technology.

PubMed

Locci, Simone; Maccioni, Maurizio; Orgiu, Emanuele; Bonfiglio, Annalisa

2007-01-01

Endowing a textile substrate (i.e. fibers, yarns, fabrics) with active functions is a new powerful concept, that has recently given rise to several interesting contributions. In this paper, we will describe a possible approach to this intriguing objective, focusing on the technology and on the electronic model. Future applications for this technology will allow to obtain, for instance, matrices of sensors assembled by textile technology and will ensure to obtain for wearable devices the necessary properties of drapability and conformity to the body that are required for these applications.

American Foundation for the Blind

MedlinePlus

... and Electronic Materials Webinars and Online Courses Accessible Technology AccessWorld ® : Technology News for People Who Are Blind or Visually Impaired Find Assistive Technology Products Using Technology: Apps, Guides, Video Demonstrations, and ...

The effect of information technology on hospital performance.

PubMed

Williams, Cynthia; Asi, Yara; Raffenaud, Amanda; Bagwell, Matt; Zeini, Ibrahim

2016-12-01

While healthcare entities have integrated various forms of health information technology (HIT) into their systems due to claims of increased quality and decreased costs, as well as various incentives, there is little available information about which applications of HIT are actually the most beneficial and efficient. In this study, we aim to assist administrators in understanding the characteristics of top performing hospitals. We utilized data from the Health Information and Management Systems Society and the Center for Medicare and Medicaid to assess 1039 hospitals. Inputs considered were full time equivalents, hospital size, and technology inputs. Technology inputs included personal health records (PHR), electronic medical records (EMRs), computerized physician order entry systems (CPOEs), and electronic access to diagnostic results. Output variables were measures of quality, hospital readmission and mortality rate. The analysis was conducted in a two-stage methodology: Data Envelopment Analysis (DEA) and Automatic Interaction Detector Analysis (AID), decision tree regression (DTreg). Overall, we found that electronic access to diagnostic results systems was the most influential technological characteristics; however organizational characteristics were more important than technological inputs. Hospitals that had the highest levels of quality indicated no excess in the use of technology input, averaging one use of a technology component. This study indicates that prudent consideration of organizational characteristics and technology is needed before investing in innovative programs.

Medicare and state health care programs: fraud and abuse; safe harbors for certain electronic prescribing and electronic health records arrangements under the anti-kickback statute. Final rule.

PubMed

2006-08-08

As required by the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (MMA), Public Law 108-173, this final rule establishes a new safe harbor under the Federal anti-kickback statute for certain arrangements involving the provision of electronic prescribing technology. Specifically, the safe harbor would protect certain arrangements involving hospitals, group practices, and prescription drug plan (PDP) sponsors and Medicare Advantage (MA) organizations that provide to specified recipients certain nonmonetary remuneration in the form of hardware, software, or information technology and training services necessary and used solely to receive and transmit electronic prescription information. In addition, in accordance with section 1128B(b)(3)(E) of the Social Security Act (the Act), this final rule creates a separate new safe harbor for certain arrangements involving the provision of nonmonetary remuneration in the form of electronic health records software or information technology and training services necessary and used predominantly to create, maintain, transmit, or receive electronic health records.

Electron-induced single event upsets in 28 nm and 45 nm bulk SRAMs

DOE PAGES

Trippe, J. M.; Reed, R. A.; Austin, R. A.; ...

2015-12-01

In this study, we present experimental evidence of single electron-induced upsets in commercial 28 nm and 45 nm CMOS SRAMs from a monoenergetic electron beam. Upsets were observed in both technology nodes when the SRAM was operated in a low power state. The experimental cross section depends strongly on both bias and technology node feature size, consistent with previous work in which SRAMs were irradiated with low energy muons and protons. Accompanying simulations demonstrate that δ-rays produced by the primary electrons are responsible for the observed upsets. Additional simulations predict the on-orbit event rates for various Earth and Jovian environmentsmore » for a set of sensitive volumes representative of current technology nodes. The electron contribution to the total upset rate for Earth environments is significant for critical charges as high as 0.2 fC. This value is comparable to that of sub-22 nm bulk SRAMs. Similarly, for the Jovian environment, the electron-induced upset rate is larger than the proton-induced upset rate for critical charges as high as 0.3 fC.« less

1989 Review Conference on New Electronic Technologies for the Elderly: Issues and Projects. Report of an Aspen Institute Conference (5th, Queenstown, Maryland, March 8-10, 1989). Communications and Society Forum Report #11.

ERIC Educational Resources Information Center

Bollier, David

This document presents summaries of conference presentations which attempted to assess how computer and communications technologies can be harnessed to meet the special needs of elderly people. Each of the eight sessions of the conference opened with experts discussing their respective research projects and electronic technologies: their origins,…

[Radiation Tolerant Electronics

NASA Technical Reports Server (NTRS)

1996-01-01

Research work in the providing radiation tolerant electronics to NASA and the commercial sector is reported herein. There are four major sections to this report: (1) Special purpose VLSI technology section discusses the status of the VLSI projects as well as the new background technologies that have been developed; (2) Lossless data compression results provide the background and direction of new data compression pursued under this grant; (3) Commercial technology transfer presents an itemization of the commercial technology transfer; and (4) Delivery of VLSI to the Government is a solution and progress report that shows how the Government and Government contractors are gaining access to the technology that has been developed by the MRC.

Electronic Signature Policy

EPA Pesticide Factsheets

Establishes the United States Environmental Protection Agency's approach to adopting electronic signature technology and best practices to ensure electronic signatures applied to official Agency documents are legally valid and enforceable

Challenges for single molecule electronic devices with nanographene and organic molecules. Do single molecules offer potential as elements of electronic devices in the next generation?

NASA Astrophysics Data System (ADS)

Enoki, Toshiaki; Kiguchi, Manabu

2018-03-01

Interest in utilizing organic molecules to fabricate electronic materials has existed ever since organic (molecular) semiconductors were first discovered in the 1950s. Since then, scientists have devoted serious effort to the creation of various molecule-based electronic systems, such as molecular metals and molecular superconductors. Single-molecule electronics and the associated basic science have emerged over the past two decades and provided hope for the development of highly integrated molecule-based electronic devices in the future (after the Si-based technology era has ended). Here, nanographenes (nano-sized graphene) with atomically precise structures are among the most promising molecules that can be utilized for electronic/spintronic devices. To manipulate single small molecules for an electronic device, a single molecular junction has been developed. It is a powerful tool that allows even small molecules to be utilized. External electric, magnetic, chemical, and mechanical perturbations can change the physical and chemical properties of molecules in a way that is different from bulk materials. Therefore, the various functionalities of molecules, along with changes induced by external perturbations, allows us to create electronic devices that we cannot create using current top-down Si-based technology. Future challenges that involve the incorporation of condensed matter physics, quantum chemistry calculations, organic synthetic chemistry, and electronic device engineering are expected to open a new era in single-molecule device electronic technology.

40 CFR 469.29 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). 469.29 Section 469.29 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Electronic... by the application of the best conventional pollution control technology (BCT). Except as provided in...

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Electronic... by the application of the best available technology economically achievable (BAT). Except as provided...

Law and Technology: Can They Keep Abreast?

ERIC Educational Resources Information Center

Weiss, Peter N.

1991-01-01

Electronic data interchange (EDI) permits two parties to enter into a contract without the use of paper and human signatures, which are historically associated with commerce in goods and services. As federal legislation governing contractual information changes to accommodate electronic formats, provisions must be crafted in a technology-neutral…

An Educated View of Technology.

ERIC Educational Resources Information Center

White, Mary Alice

For education to respond to the new technologies that offer tools for mind expansion, the concept of information itself must be redefined. Instruction via electronic sources is a very different way of learning than instruction by print: electronic instruction is highly interactive, under the user's control, and full of imagery. Imagery is the…

Maximizing the Use of Electronic Individualized Education Program Software

ERIC Educational Resources Information Center

More, Cori M.; Hart, Juliet E.

2013-01-01

With the growing use of technology in today's schools, electronic IEP programs are being adopted by many school districts around the nation as part of special education service delivery. These programs provide a useful technology that can facilitate compliance with IDEA requirements in IEP development while concurrently lessening teacher paperwork…

Agricultural Electronics. Curriculum Guide for Agriscience 324.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Dept. of Agricultural Education.

This guide outlines the topics of instruction and goals/objectives of a half-unit shop/laboratory course in agricultural electronics (Agriscience 324) that is part of Texas' secondary-level agricultural science and technology program. Presented first are lists of the essential elements common to all agricultural science and technology courses…

In Sync with Science Teaching

ERIC Educational Resources Information Center

Scribner-MacLean, Michelle; Nikonchuk, Andrew; Kaplo, Patrick; Wall, Michael

2006-01-01

Science educators are often among the first to use emerging technologies in the classroom and laboratory. For the technologically savvy science teacher, the handheld computer is a terrific tool. A handheld computer is a portable electronic device that helps organize (via calendars, contact lists, to-do lists) and integrate electronic data…

75 FR 65652 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... Certain Products Containing Interactive Program Guide and Parental Controls Technology, DN 2763; the... guide and parental controls technology. The complaint names as respondents Toshiba Corp. of Minato-ku.../handbook_on_electronic_filing.pdf ). Persons with questions regarding electronic filing should contact the...

The New Publishing: Technology's Impact on the Publishing Industry over the Next Decade.

ERIC Educational Resources Information Center

Rawlins, Gregory J. E.

1992-01-01

Discusses technology's impact on the products, revenue sources, and distribution channels of the publishing industry over the next decade. Highlights include electronic books and copy protection; copyright; advantages of electronic books to users, libraries, and publishers; retailing schemes; changes in education; subscription publishing;…

Making Technology Work for Scholarship: Investing in the Data.

ERIC Educational Resources Information Center

Hockey, Susan

This paper examines issues related to how providers and consumers can make the best use of electronic information, focusing on the humanities. Topics include: new technology or old; electronic text and data formats; Standard Generalized Markup Language (SGML); text encoding initiative; encoded archival description (EAD); other applications of…

Advanced Electronics Technologies: Challenges for Radiation Effects Testing, Modeling, and Mitigation

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2005-01-01

Emerging Electronics Technologies include: 1) Changes in the commercial semiconductor world; 2) Radiation Effects Sources (A sample test constraint); and 3) Challenges to Radiation Testing and Modeling: a) IC Attributes-Radiation Effects Implication b) Fault Isolation c) Scaled Geometry d) Speed e) Modeling Shortfall f) Knowledge Status

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Electronic... by the application of the best available technology economically achievable (BAT). Except as provided...

Spinoff from Wind Tunnel Technology

NASA Technical Reports Server (NTRS)

1985-01-01

Douglas Juanarena, a former NASA Langley instrument design engineer, found a solution to the problem of long, repetitive tunnel runs needed to measure airflow pressures. Electronically scanned pressure (ESP) replaced mechanical systems with electronic sensors. Juanarena licensed the NASA-patented technology and now manufactures ESP modules for research centers, aerospace companies, etc.

78 FR 21308 - Medicare Program; Physicians' Referrals to Health Care Entities With Which They Have Financial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

... electronic health records software and directly related training services, using our authority at section... electronic health records software or information technology and training services. As set forth at 42 CFR...), we explained that we interpreted ``software, information technology and training services necessary...

49 CFR 39.3 - What do the terms in this rule mean?

Code of Federal Regulations, 2010 CFR

2010-10-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology, or other effective methods of making visually delivered materials... impairment means has a history of, or has been misclassified as having, a mental or physical impairment that...

Use of Information Technology in Optometric Education.

ERIC Educational Resources Information Center

Elam, Jimmy H.

1999-01-01

To enhance the information technology literacy of optometry students, the Southern College of Optometry (Tennessee) developed an academic assignment, the Electronic Media Paper, in which second-year students must search two different electronic media for information. Results suggest Internet use for searching may be a useful tool for specific…

Technology, Privacy, and Electronic Freedom of Speech.

ERIC Educational Resources Information Center

McDonald, Frances M.

1986-01-01

Explores five issues related to technology's impact on privacy and access to information--regulation and licensing of the press, electronic surveillance, invasion of privacy, copyright, and policy-making and regulation. The importance of First Amendment rights and civil liberties in forming a coherent national information policy is stressed.…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trippe, J. M.; Reed, R. A.; Austin, R. A.

In this study, we present experimental evidence of single electron-induced upsets in commercial 28 nm and 45 nm CMOS SRAMs from a monoenergetic electron beam. Upsets were observed in both technology nodes when the SRAM was operated in a low power state. The experimental cross section depends strongly on both bias and technology node feature size, consistent with previous work in which SRAMs were irradiated with low energy muons and protons. Accompanying simulations demonstrate that δ-rays produced by the primary electrons are responsible for the observed upsets. Additional simulations predict the on-orbit event rates for various Earth and Jovian environmentsmore » for a set of sensitive volumes representative of current technology nodes. The electron contribution to the total upset rate for Earth environments is significant for critical charges as high as 0.2 fC. This value is comparable to that of sub-22 nm bulk SRAMs. Similarly, for the Jovian environment, the electron-induced upset rate is larger than the proton-induced upset rate for critical charges as high as 0.3 fC.« less

Tattoo-Paper Transfer as a Versatile Platform for All-Printed Organic Edible Electronics.

PubMed

Bonacchini, Giorgio E; Bossio, Caterina; Greco, Francesco; Mattoli, Virgilio; Kim, Yun-Hi; Lanzani, Guglielmo; Caironi, Mario

2018-04-01

The use of natural or bioinspired materials to develop edible electronic devices is a potentially disruptive technology that can boost point-of-care testing. The technology exploits devices that can be safely ingested, along with pills or even food, and operated from within the gastrointestinal tract. Ingestible electronics can potentially target a significant number of biomedical applications, both as therapeutic and diagnostic tool, and this technology may also impact the food industry, by providing ingestible or food-compatible electronic tags that can "smart" track goods and monitor their quality along the distribution chain. Temporary tattoo-paper is hereby proposed as a simple and versatile platform for the integration of electronics onto food and pharmaceutical capsules. In particular, the fabrication of all-printed organic field-effect transistors on untreated commercial tattoo-paper, and their subsequent transfer and operation on edible substrates with a complex nonplanar geometry is demonstrated. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

NASA Electronic Parts and Packaging (NEPP) Program - Update

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

This slide presentation reviews the goals and mission of the NASA Electronic Parts and Packaging (NEPP) Program. The NEPP mission is to provide guidance to NASA for the selection and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission assurance needs. The program has been supporting NASA for over 20 years. The focus is on the reliability aspects of electronic devices. In this work the program also supports the electronics industry. There are several areas that the program is involved in: Memories, systems on a chip (SOCs), data conversion devices, power MOSFETS, power converters, scaled CMOS, capacitors, linear devices, fiber optics, and other electronics such as sensors, cryogenic and SiGe that are used in space systems. Each of these area are reviewed with the work that is being done in reliability and effects of radiation on these technologies.

42 CFR 414.92 - Electronic Prescribing Incentive Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Electronic Prescribing Incentive Program. 414.92... Physicians and Other Practitioners § 414.92 Electronic Prescribing Incentive Program. (a) Basis and scope... section, unless otherwise indicated— Certified electronic health record technology means an electronic...

42 CFR 414.92 - Electronic Prescribing Incentive Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Electronic Prescribing Incentive Program. 414.92... Physicians and Other Practitioners § 414.92 Electronic Prescribing Incentive Program. (a) Basis and scope... section, unless otherwise indicated— Certified electronic health record technology means an electronic...

42 CFR 414.92 - Electronic Prescribing Incentive Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Electronic Prescribing Incentive Program. 414.92... Physicians and Other Practitioners § 414.92 Electronic Prescribing Incentive Program. (a) Basis and scope... section, unless otherwise indicated— Certified electronic health record technology means an electronic...

[Application of electronic fence technology based on GIS in Oncomelania hupensis snail monitoring].

PubMed

Zhi-Hua, Chen; Yi-Sheng, Zhu; Zhi-Qiang, Xue; Xue-Bing, Li; Yi-Min, Ding; Li-Jun, Bi; Kai-Min, Gao; You, Zhang

2017-07-27

To study the application of Geographic Information System (GIS) electronic fence technique in Oncomelania hupensis snail monitoring. The electronic fence was set around the history and existing snail environments in the electronic map, the information about snail monitoring and controlling was linked to the electronic fence, and the snail monitoring information system was established on these bases. The monitoring information was input through the computer and smart phone. The electronic fence around the history and existing snail environments was set in the electronic map (Baidu map), and the snail monitoring information system and smart phone APP were established. The monitoring information was input and upload real-time, and the snail monitoring information was demonstrated in real time on Baidu map. By using the electronic fence technology based on GIS, the unique "environment electronic archives" for each snail monitoring environment can be established in the electronic map, and real-time, dynamic monitoring and visual management can be realized.

Low-Dimensional Nanomaterials and Molecular Dielectrics for Radiation-Hard Electronics

NASA Astrophysics Data System (ADS)

McMorrow, Julian

The electronic materials research driving Moore's law has provided several decades of increasingly powerful yet simultaneously miniaturized computer technologies. As we approach the physical and practical limits of what can be accomplished with silicon electronics, we look to new materials to drive innovation in future electronic applications. New materials paradigms require the development of understanding from first principles to the demonstration of applications that comes with mature technologies. Semiconducting single-walled carbon nanotubes (SWCNTs), single- and few-layer molybdenum disulfide (MoS2) and self-assembled nanodielectric (SAND) gate materials have all made significant impacts in the research field of unconventional electronic materials. The materials selection, interfaces between materials, processing steps to assemble them, and their interaction with their environment all have significant bearing on the operation of the overall device. Operating in harsh radiation environments, like those of satellites orbiting the Earth, present unique challenges to the functionality and reliability of electronic devices. Because the future of space-bound electronics is often informed by the technology of terrestrial devices, a proactive approach is adopted to identify and understand the radiation response of new materials systems as they emerge and develop. The work discussed here drives the innovation and development of multiple nanomaterial based electronic technologies while simultaneously exploring their relevant radiation response mechanisms. First, collaborative efforts result in the demonstration of a SWCNT-based circuit technology that is solution processed, large-area, and compatible with flexible substrates. The statistical characterization of SWCNT transistors enables the development of robust doping and encapsulation schemes, which make the SWCNT circuits stable, scalable, and low-power. These SWCNTs are then integrated into static random access memory (SRAM) cells, an accomplishment that illustrates the technological relevance of this work by implementing a highly utilized component of modern day computing. Next, these SRAM devices demonstrate functionality as true random number generators (TRNGs), which are critical components in cryptography and encryption. The randomness of these SWCNT TRNGs is verified by a suite of statistical tests. This achievement has implications for securing data and communication in future solution-processed, large-area, flexible electronics. The unprecedented integration achieved by the underlying SWCNT doping and encapsulation motivates the study of this technology in a radiation environment. Doing so results in an understanding of the fundamental charge trapping mechanisms responsible for the radiation response in this system. The integrated nature of these devices enables, for the first time, the observation of system-level effects in a SWCNT integrated circuit technology. This technology is found to be total ionizing dose-hard, a promising result for the adoption of SWCNTs in future space-bound applications. Compared to SWCNTs, the field of MoS2 electronics is relatively nascent. As a result, studies of radiation effects in MoS2 devices focus on the fundamental mechanisms at play in the materials system. Here, we reveal the critical role of atmospheric adsorbates in the radiation effects of MoS2 transistors by measuring their response to vacuum ultraviolet radiation. These results highlight the importance of controlling the atmosphere of MoS2 devices during irradiation. Furthermore, we make recommendations for radiation-hard MoS2-based devices in the future as the technology continues to mature. One such recommendation is the incorporation of specialized dielectrics with proven radiation hardness. To this end, we address the materials integration challenge of incorporating SAND gate dielectrics on arbitrary substrates. We explore a novel approach for preparing metal substrates for SAND deposition, supporting the SAND superlattice structure and its superlative electronic properties on a metal surface. This result is critical for conducting fundamental transport studies when integrating SAND with novel semiconductor materials, as well as enabling complex circuit integration and SAND on flexible substrates. Altogether, these works drive the integration of novel nanoelectronic materials for future electronics while providing an understanding of their varying radiation response mechanisms to enable their adoption in future space-bound applications.

Electron beam ion source and electron beam ion trap (invited).

PubMed

Becker, Reinard; Kester, Oliver

2010-02-01

The electron beam ion source (EBIS) and its trap variant [electron beam ion trap (EBIT)] celebrated their 40th and 20th anniversary, respectively, at the EBIS/T Symposium 2007 in Heidelberg. These technologically challenging sources of highly charged ions have seen a broad development in many countries over the last decades. In contrast to most other ion sources the recipe of improvement was not "sorcery" but a clear understanding of the physical laws and obeying the technological constraints. This review will report important achievements of the past as well as promising developments in the future.

Electronic Publishing or Electronic Information Handling?

NASA Astrophysics Data System (ADS)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

Low-Cost Inkjet Printing Technology for the Rapid Prototyping of Transducers

PubMed Central

Andò, Bruno; Baglio, Salvatore; Bulsara, Adi R.; Emery, Teresa; Marletta, Vincenzo; Pistorio, Antonio

2017-01-01

Recently, there has been an upsurge in efforts dedicated to developing low-cost flexible electronics by exploiting innovative materials and direct printing technologies. This interest is motivated by the need for low-cost mass-production, shapeable, and disposable devices, and the rapid prototyping of electronics and sensors. This review, following a short overview of main printing processes, reports examples of the development of flexible transducers through low-cost inkjet printing technology. PMID:28368318

Power management and distribution technology

NASA Astrophysics Data System (ADS)

Dickman, John Ellis

Power management and distribution (PMAD) technology is discussed in the context of developing working systems for a piloted Mars nuclear electric propulsion (NEP) vehicle. The discussion is presented in vugraph form. The following topics are covered: applications and systems definitions; high performance components; the Civilian Space Technology Initiative (CSTI) high capacity power program; fiber optic sensors for power diagnostics; high temperature power electronics; 200 C baseplate electronics; high temperature component characterization; a high temperature coaxial transformer; and a silicon carbide mosfet.

Power management and distribution technology

NASA Technical Reports Server (NTRS)

Dickman, John Ellis

1993-01-01

Power management and distribution (PMAD) technology is discussed in the context of developing working systems for a piloted Mars nuclear electric propulsion (NEP) vehicle. The discussion is presented in vugraph form. The following topics are covered: applications and systems definitions; high performance components; the Civilian Space Technology Initiative (CSTI) high capacity power program; fiber optic sensors for power diagnostics; high temperature power electronics; 200 C baseplate electronics; high temperature component characterization; a high temperature coaxial transformer; and a silicon carbide mosfet.

Technology-based strategies for promoting clinical reasoning skills in nursing education.

PubMed

Shellenbarger, Teresa; Robb, Meigan

2015-01-01

Faculty face the demand of preparing nursing students for the constantly changing health care environment. Effective use of online, classroom, and clinical conferencing opportunities helps to enhance nursing students' clinical reasoning capabilities needed for practice. The growth of technology creates an avenue for faculty to develop engaging learning opportunities. This article presents technology-based strategies such as electronic concept mapping, electronic case histories, and digital storytelling that can be used to facilitate clinical reasoning skills.

Determination of blueberry and strawberry maturity and aroma quality and effect of HLB on orange juice aroma: comparison of Z-nose, E-nose and GC-MS technologies

USDA-ARS?s Scientific Manuscript database

Electronic nose technology could be very useful in quality control discrimination of products. The Z-nose (Electronic Sensory Technology, Model 4500) was equipped with a Tenax trap (2 mg, 225 ºC), and 1 m DB5 column, an acoustic wave detector and an oven set to ramp from 40-180 ºC at a rate of 10 ºC...

Long-Term Electronic Technology Trends: Forecasted Impacts on Education. Paper presented to Congress of the United States, House of Representatives, Committee on Education and Labor, Subcommittee on Elementary, Secondary, and Vocational Education (April 25, 1979).

ERIC Educational Resources Information Center

Joseph, Earl C.

The technological-driven future will evolve through the next decades to massively impact elementary and secondary education, starting in the 1980 decade and building toward revolutionizing education in the 1990 decade. The evolving "silicon revolution" is producing a continuing list of new electronic technology poised at the threshold for massive…

Assessment of computer dispatch technology in the paratransit industry

DOT National Transportation Integrated Search

Intelligent Vehicle-Highway Systems (IVHS) technologies include a range of communications and control technologies. The U.S. Department of Transportation has applied IVHS technologies, such as electronic payment media, automatic vehicle locator syste...

Economics of Electronic Publishing: Cost Issues--Comments on Session One Presentations.

ERIC Educational Resources Information Center

Shirrell, Robert

This paper comments on three presentations (Janet Fisher, Malcolm Getz, and Bill Regier) at the Scholarly Communication and Technology Conference; it focuses on publisher costs, and also discusses the electronic publishing efforts undertaken at the University of Chicago Press. Janet Fisher, from MIT (Massachusetts Institute of Technology) Press,…

Impact of Technology Policy in the Higher Education Classroom: Emerging Trends

ERIC Educational Resources Information Center

Roberge, Ginette D.; Gagnon, Lissa L.

2014-01-01

With the constant evolution of technology, there has been a growing use of electronic devices in postsecondary classrooms, by students and educators, over the last several decades. A recent publication by Becker (2013) highlights potential issues with students utilizing a variety of electronic devices in higher education and the implications for…

From Piloting e-Submission to Electronic Management of Assessment (EMA): Mapping Grading Journeys

ERIC Educational Resources Information Center

Vergés Bausili, Anna

2018-01-01

The increasing interest in electronic management of assessment is a sign of a gradual institutionalisation of e-submission and e-marking technologies in UK Higher Education. The effective adoption of these technologies requires a managed approach, especially a detailed understanding of current assessment practices within the institution and the…

Industry Driven Electronic Communication Competencies for an Associate Electronics Degree: A Phenomenological Study

ERIC Educational Resources Information Center

McNeill, Dennis G.

2013-01-01

Scholars and professionals alike contend our nation's competitive position and economic growth depends considerably on the acumen of its science, technology, engineering, and math (STEM) talent pool. In spite of current economic conditions and high national unemployment, there is an increasing demand for those skilled in technology and…

Materials and Fabrication Methods II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; Bay, Robert

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic instruments and their…

The Electronic Lumberyard and Builders' Rights: Technology, Copyrights, Patents, and Academe.

ERIC Educational Resources Information Center

Fisher, Francis Dummer

1989-01-01

The legal system of copyright may have worked in the era of print, but with electronic technology, society needs less encumbered and cheaper access to expressed ideas. Economic success will go to those nations that best succeed in promoting creativity without inhibiting the incorporation of expressed ideas into other products. (MLW)

The Student Handbook, Federal Law and Electronic Technology.

ERIC Educational Resources Information Center

Gregory, Dennis E.

2002-01-01

Student handbooks clearly make up a portion of the contract that colleges and universities have with their students. Handbooks also provide a means by which institutions may comply with obligations that are required of them by governmental entities. New electronic technologies already in place will increasingly be used to provide this information…

Electronic Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in electronic technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

3 CFR 8754 - Proclamation 8754 of November 15, 2011. America Recycles Day, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

... accommodate emerging technologies. Our Nation generates over two million tons of used electronics annually... technologies, my Administration launched the National Strategy for Electronics Stewardship earlier this year... ourselves to do even more. As we rise to meet this challenge, we fulfill a promise to our children that they...

Quality and Electronic Health Records in Community Health Centers

ERIC Educational Resources Information Center

Lesh, Kathryn A.

2014-01-01

Adoption and use of health information technology, the electronic health record (EHR) in particular, has the potential to help improve the quality of care, increase patient safety, and reduce health care costs. Unfortunately, adoption and use of health information technology has been slow, especially when compared to the adoption and use of…

Overview of Silicon Carbide Technology: Device, Converter, System, and Application

DOE PAGES

Wang, Fei; Zhang, Zheyu

2016-12-28

This article overviews the silicon carbide (SiC) technology. The focus is on the benefits of SiC based power electronics for converters and systems, as well as their ability in enabling new applications. The challenges and research trends on the design and application of SiC power electronics are also discussed.

78 FR 79201 - Medicare and State Health Care Programs: Fraud and Abuse; Electronic Health Records Safe Harbor...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... interoperable electronic health records software or information technology and training services. The final rule... information technology and training services necessary and used predominantly to create, maintain, transmit... ordering of, any good, facility, service, or item reimbursable by any Federal health care program. Because...

Diesel Technology: Electrical and Electronic Systems. Teacher Edition [and] Student Edition.

ERIC Educational Resources Information Center

Ready, Allan; Kauffman, Ricky; Bogle, Jerry

This document contains the materials for a competency-based course in diesel technology and electrical and electronic systems that is tied to measurable and observable learning outcomes identified and validated by an advisory committee of business and industry representatives and teachers. The competencies addressed align with the medium/heavy…

What Students Want: Leave Me Alone...I'm Socializing

ERIC Educational Resources Information Center

Starkman, Neal

2007-01-01

Through conversations with students across different grade levels, there is clear evidence that two of the things they most desire contradict each other--and they use electronic technology to get both of them. This author had conversations with three groups of students in Seattle about their favorite electronic technologies, and any concerns they…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

ERIC Educational Resources Information Center

Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

2013-01-01

Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

Presentation Technology in the Age of Electronic Eloquence: From Visual Aid to Visual Rhetoric

ERIC Educational Resources Information Center

Cyphert, Dale

2007-01-01

Attention to presentation technology in the public speaking classroom has grown along with its contemporary use, but instruction generally positions the topic as a subset of visual aids. As contemporary public discourse enters an age of electronic eloquence, instructional focus on verbal communication might limit students' capacity to effectively…

78 FR 21314 - Medicare and State Health Care Programs: Fraud and Abuse; Electronic Health Records Safe Harbor...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

... health records software or information technology and training services. The final rule for this safe... health records software or information technology and training services. In the same issue of the Federal..., licenses, and intellectual property related to electronic health records software; connectivity services...

Electronic Blending in Virtual Microscopy

ERIC Educational Resources Information Center

Maybury, Terrence S.; Farah, Camile S.

2010-01-01

Virtual microscopy (VM) is a relatively new technology that transforms the computer into a microscope. In essence, VM allows for the scanning and transfer of glass slides from light microscopy technology to the digital environment of the computer. This transition is also a function of the change from print knowledge to electronic knowledge, or as…

NASA Tech Briefs, Spring/Summer 1982. Volume 6, No. 4

NASA Technical Reports Server (NTRS)

1982-01-01

Topics covered include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; and Machinery.

77 FR 15180 - Agency Information Collection Activities: Request for Comments for a New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

..., including the use of electronic technology, without reducing the quality of the collected information. All... project includes a literature review of current guidance and practices, a technical report on performance... burden could be minimized, including the use of electronic technology, without reducing the quality of...

Use of electronic nose technology to identify cattle experimentally infected with Mycobacterium bovis: A pilot study

USDA-ARS?s Scientific Manuscript database

Electronic nose technology has historically been utilized for the detection of volatile organic compounds (VOCs) and semi-volatile compounds in air, soil, water, and for quality control in food, beverage and cosmetic industries. Breath analysis has been used experimentally in humans and animals to ...

High Penetration Photovoltaic Power Electronics and Energy Management Technology Research, Development and Demonstration: Cooperative Research and Development Final Report, CRADA Number CRD-13-517

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudgins, Andrew P.

Advanced Energy Industries, Inc., will partner with DOE's National Renewable Energy Laboratory (NREL) to conduct research and development to demonstrate technologies that will increase the penetration of photovoltaic (PV) technologies for commercial and utility applications. Standard PV power control systems use simple control techniques that only provide real power to the grid. A focus of this partnership is to demonstrate how state of the art control and power electronic technologies can be combined to create a utility interactive control platform.

A Review of NASA's Radiation-Hardened Electronics for Space Environments Project

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Adams, James H.; Patrick, Marshall C.; Johnson, Michael A.; Cressler, John D.

2008-01-01

NASA's Radiation Hardened Electronics for Space Exploration (RHESE) project develops the advanced technologies required to produce radiation hardened electronics, processors, and devices in support of the requirements of NASA's Constellation program. Over the past year, multiple advancements have been made within each of the RHESE technology development tasks that will facilitate the success of the Constellation program elements. This paper provides a brief review of these advancements, discusses their application to Constellation projects, and addresses the plans for the coming year.

Oxide nanoelectronics on demand.

PubMed

Cen, Cheng; Thiel, Stefan; Mannhart, Jochen; Levy, Jeremy

2009-02-20

Electronic confinement at nanoscale dimensions remains a central means of science and technology. We demonstrate nanoscale lateral confinement of a quasi-two-dimensional electron gas at a lanthanum aluminate-strontium titanate interface. Control of this confinement using an atomic force microscope lithography technique enabled us to create tunnel junctions and field-effect transistors with characteristic dimensions as small as 2 nanometers. These electronic devices can be modified or erased without the need for complex lithographic procedures. Our on-demand nanoelectronics fabrication platform has the potential for widespread technological application.

45 CFR 170.205 - Content exchange standards and implementation specifications for exchanging electronic health...

Code of Federal Regulations, 2011 CFR

2011-10-01

... HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.205 Content.... The Healthcare Information Technology Standards Panel (HITSP) Summary Documents Using HL7 CCD...

45 CFR 170.205 - Content exchange standards and implementation specifications for exchanging electronic health...

Code of Federal Regulations, 2010 CFR

2010-10-01

... HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY Standards and Implementation Specifications for Health Information Technology § 170.205 Content.... The Healthcare Information Technology Standards Panel (HITSP) Summary Documents Using HL7 CCD...

Associate Degree Curriculum for Engineering Technology.

ERIC Educational Resources Information Center

Campbell, Clifton P.

Presented is a two-year associate degree curriculum for Engineering Technology. Specializations are provided in civil, electronics, and mechanical technology. The civil engineering technology specialization facilitates three major areas of study, and mechanical technology includes design and production options. Each curriculum was designed to…

Compliance With Electronic Medical Records Privacy Policy: An Empirical Investigation of Hospital Information Technology Staff

PubMed Central

Sher, Ming-Ling; Talley, Paul C.; Yang, Ching-Wen; Kuo, Kuang-Ming

2017-01-01

The employment of Electronic Medical Records is expected to better enhance health care quality and to relieve increased financial pressure. Electronic Medical Records are, however, potentially vulnerable to security breaches that may result in a rise of patients’ privacy concerns. The purpose of our study was to explore the factors that motivate hospital information technology staff’s compliance with Electronic Medical Records privacy policy from the theoretical lenses of protection motivation theory and the theory of reasoned action. The study collected data using survey methodology. A total of 310 responses from information technology staff of 7 medical centers in Taiwan was analyzed using the Structural Equation Modeling technique. The results revealed that perceived vulnerability and perceived severity of threats from Electronic Medical Records breaches may be used to predict the information technology staff’s fear arousal level. And factors including fear arousal, response efficacy, self-efficacy, and subjective norm, in their turn, significantly predicted IT staff’s behavioral intention to comply with privacy policy. Response cost was not found to have any relationship with behavioral intention. Based on the findings, we suggest that hospitals could plan and design effective strategies such as initiating privacy-protection awareness and skills training programs to improve information technology staff member’s adherence to privacy policy. Furthermore, enhancing the privacy-protection climate in hospitals is also a viable means to the end. Further practical and research implications are also discussed.

The Feasibility of Digital Pen and Paper Technology for Vital Sign Data Capture in Acute Care Settings

PubMed Central

Dykes, Patricia C.; Benoit, Angela; Chang, Frank; Gallagher, Joan; Li, Qi; Spurr, Cindy; McGrath, E. Jan; Kilroy, Susan M.; Prater, Marita

2006-01-01

The transition from paper to electronic documentation systems in acute care settings is often gradual and characterized by a period in which paper and electronic processes coexist. Intermediate technologies are needed to “bridge” the gap between paper and electronic systems as a means to improve work flow efficiency through data acquisition at the point of care in structured formats to inform decision support and facilitate reuse. The purpose of this paper is to report on the findings of a study conducted on three acute care units at Brigham and Women’s Hospital and Massachusetts General Hospital in Boston, MA to evaluate the feasibility of digital pen and paper technology as a means to capture vital sign data in the context of acute care workflows and to make data available in a flow sheet in the electronic medical record. PMID:17238337

The feasibility of digital pen and paper technology for vital sign data capture in acute care settings.

PubMed

Dykes, Patricia C; Benoit, Angela; Chang, Frank; Gallagher, Joan; Li, Qi; Spurr, Cindy; McGrath, E Jan; Kilroy, Susan M; Prater, Marita

2006-01-01

The transition from paper to electronic documentation systems in acute care settings is often gradual and characterized by a period in which paper and electronic processes coexist. Intermediate technologies are needed to "bridge" the gap between paper and electronic systems as a means to improve work flow efficiency through data acquisition at the point of care in structured formats to inform decision support and facilitate reuse. The purpose of this paper is to report on the findings of a study conducted on three acute care units at Brigham and Women's Hospital and Massachusetts General Hospital in Boston, MA to evaluate the feasibility of digital pen and paper technology as a means to capture vital sign data in the context of acute care workflows and to make data available in a flow sheet in the electronic medical record.

Positioning a Paediatric Compounded Non-Sterile Product Electronic Repository (pCNPeRx) within the Health Information Technology Infrastructure

PubMed Central

Parrish, Richard H.

2015-01-01

Numerous gaps in the current medication use system impede complete transmission of electronically identifiable and standardized extemporaneous formulations as well as a uniform approach to medication therapy management (MTM) for paediatric patients. The Pharmacy Health Information Technology Collaborative (Pharmacy HIT) identified six components that may have direct importance for pharmacy related to medication use in children. This paper will discuss key positions within the information technology infrastructure (HIT) where an electronic repository for the medication management of paediatric patients’ compounded non-sterile products (pCNP) and care provision could be housed optimally to facilitate and maintain transmission of e-prescriptions (eRx) from initiation to fulfillment. Further, the paper will propose key placement requirements to provide for maximal interoperability of electronic medication management systems to minimize disruptions across the continuum of care. PMID:28970375

A Value-Added Framework for Analyzing Electronic and Print Publishing.

ERIC Educational Resources Information Center

Perritt, Henry H., Jr.

1991-01-01

Discusses changes in the publishing industry resulting from digital electronic networks and optical storage technologies, and explains attributes of information products as types of value for both print and electronic contexts. Electronic products necessary for a shift from paper to electronic formats are identified, and legal issues are…

Electronic Creativity Techniques for Organizational Innovation.

ERIC Educational Resources Information Center

Siau, Keng L.

1996-01-01

Discusses using advanced electronic and communication technology to improve organizational innovation. Group creativity techniques, such as electronic brainstorming, PMI (a brainstorming approach involving plus, minus, and interesting points), synectics, and their verbal counterparts are compared. Electronic PMI and synectics are found to be…

Technology Area Roadmap for In-Space Propulsion Technologies

NASA Technical Reports Server (NTRS)

Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold

2012-01-01

The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA fs Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: \\Propulsion using Electrodynamics.. The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques

Electron beams in research and technology

NASA Astrophysics Data System (ADS)

Mehnert, R.

1995-11-01

Fast electrons lose their energy by inelastic collisions with electrons of target molecules forming secondary electrons and excited molecules. Coulomb interaction of secondary electrons with valence electrons of neighboring molecules leads to the formation of radical cations, thermalized electrons, excited molecular states and radicals. The primary reactive species initiate chemical reactions in the materials irradiated. Polymer modifications using accelerated electrons such as cross-linking of cable insulation, tubes, pipes and moldings, vulcanization of elastomers, grafting of polymer surfaces, processing of foamed plastics and heat shrinkable materials have gained wide industrial acceptance. A steadily growing electron beam technology is curing of paints, lacquers, printing inks and functional coatings. Electron beam processing offers high productivity, the possibility to treat the materials at normal temperature and pressure, excellent process control and clean production conditions. On an industrial scale the most important application of fast electrons is curing of 100% reactive monomer/prepolymer systems. Mainly acrylates and epoxides are used to formulate functional coatings on substrates such as paper, foil, wood, fibre board and high pressure laminates. A survey is given about the reaction mechanism of curing, the characterization of cured coatings, and of some industrial application.

The use of electronic devices for communication with colleagues and other healthcare professionals - nursing professionals' perspectives.

PubMed

Koivunen, Marita; Niemi, Anne; Hupli, Maija

2015-03-01

The aim of the study is to describe nursing professionals' experiences of the use of electronic devices for communication with colleagues and other healthcare professionals. Information and communication technology applications in health care are rapidly expanding, thanks to the fast-growing penetration of the Internet and mobile technology. Communication between professionals in health care is essential for patient safety and quality of care. Implementing new methods for communication among healthcare professionals is important. A cross-sectional survey was used in the study. The data were collected in spring 2012 using an electronic questionnaire with structured and open-ended questions. The target group comprised the nursing professionals (N = 567, n = 123) in one healthcare district who worked in outpatient clinics in publically funded health care in Finland. Nursing professionals use different electronic devices for communication with each other. The most often used method was email, while the least used methods were question-answer programmes and synchronous communication channels on the Internet. Communication using electronic devices was used for practical nursing, improving personnel competences, organizing daily operations and administrative tasks. Electronic devices may speed up the management of patient data, improve staff cooperation and competence and make more effective use of working time. The obstacles were concern about information security, lack of technical skills, unworkable technology and decreasing social interaction. According to our findings, despite the obstacles related to use of information technology, the use of electronic devices to support communication among healthcare professionals appears to be useful. © 2014 John Wiley & Sons Ltd.

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology.

PubMed

Rorie, David A; Flynn, Robert W V; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M; Rogers, Amy

2017-09-01

Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost-effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology

PubMed Central

Flynn, Robert W. V.; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M.; Rogers, Amy

2017-01-01

Aims Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. Methods The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. Results There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Conclusion Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost‐effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. PMID:28276585

Cross-Media Electronic Reporting Rule

EPA Pesticide Factsheets

Cross-Media Electronic Reporting Regulation (CROMERR) sets performance-based, technology-neutral standards for systems that states, tribes, and local governments use to receive electronic reports from facilities they regulate under EPA-authorized programs.

Contemporary Technology.

ERIC Educational Resources Information Center

Clark, Gilbert, Ed.

1999-01-01

This theme issue of "InSEA News" focuses on contemporary technology and art education. The articles are: "International Travel and Contemporary Technology" (Gilbert Clark); "Recollections and Visions for Electronic Computing in Art Education" (Guy Hubbard); "Using Technologies in Art Education: A Review of…

Technology 2004, Vol. 2

NASA Technical Reports Server (NTRS)

1995-01-01

Proceedings from symposia of the Technology 2004 Conference, November 8-10, 1994, Washington, DC. Volume 2 features papers on computers and software, virtual reality simulation, environmental technology, video and imaging, medical technology and life sciences, robotics and artificial intelligence, and electronics.

Microtechnology management considering test and cost aspects for stacked 3D ICs with MEMS

NASA Astrophysics Data System (ADS)

Hahn, K.; Wahl, M.; Busch, R.; Grünewald, A.; Brück, R.

2018-01-01

Innovative automotive systems require complex semiconductor devices currently only available in consumer grade quality. The European project TRACE will develop and demonstrate methods, processes, and tools to facilitate usage of Consumer Electronics (CE) components to be deployable more rapidly in the life-critical automotive domain. Consumer electronics increasingly use heterogeneous system integration methods and "More than Moore" technologies, which are capable to combine different circuit domains (Analog, Digital, RF, MEMS) and which are integrated within SiP or 3D stacks. Making these technologies or at least some of the process steps available under automotive electronics requirements is an important goal to keep pace with the growing demand for information processing within cars. The approach presented in this paper aims at a technology management and recommendation system that covers technology data, functional and non-functional constraints, and application scenarios, and that will comprehend test planning and cost consideration capabilities.

Sensors and Micromachined Devices for the Automotive and New Markets: The Delphi Delco Electronics MEMS Story.

NASA Astrophysics Data System (ADS)

Logsdon, James

2002-03-01

This presentation will provide a brief history of the development of MEMS products and technology, beginning with the manifold absolute pressure sensor in the late seventies through the current variety of Delphi Delco Electronics sensors available today. The technology development of micromachining from uncompensated P plus etch stops to deep reactive ion etching and the technology development of wafer level packaging from electrostatic bonding to glass frit sealing and silicon to silicon direct bonding will be reviewed.

A Motor Drive Electronics Assembly for Mars Curiosity Rover: An Example of Assembly Qualification for Extreme Environments

NASA Technical Reports Server (NTRS)

Kolawa, Elizabeth; Chen, Yuan; Mojarradi, Mohammad M.; Weber, Carissa Tudryn; Hunter, Don J.

2013-01-01

This paper describes the technology development and infusion of a motor drive electronics assembly for Mars Curiosity Rover under space extreme environments. The technology evaluation and qualification as well as space qualification of the assembly are detailed and summarized. Because of the uncertainty of the technologies operating under the extreme space environments and that a high level reliability was required for this assembly application, both component and assembly board level qualifications were performed.

Applications and research on nano power electronics: an adventure beyond quantum electronics

NASA Astrophysics Data System (ADS)

Chakraborty, Arindam; Emadi, Ali

2005-06-01

This paper is a roadmap to the exhaustive role of the newly emerging field of nanotechnology in various application and research areas. Some of the today's important topics are plasma, dielectric layer semiconductor, and carbon nanoparticle based technologies. Carbon nanotubes are very useful for the purpose of fabricating nano opto power devices. The basic concept behind tunneling of electrons has been utilized to define another scope of this technology, and thus came many quantum scale tunneling devices and elements. Fabrication of crystal semiconductors of high quality along with oxides of nano aspect would give rise to superior device performance and find applications such as LEDs, LASER, VLSI technology and also in highly efficient solar cells. Many nano-research based organizations are fully devoted to develop nano power cells, which would give birth to new battery cells, tunneling devises, with high power quality, longer lives, and higher activation rates. Different electronics industries as well as the military organizations would be largely benefited due to this major component and system design ideas of 'Smart Power' technologies. The contribution of nano scale power electronics would be realized in various fields like switching devices, electromechanical systems and quantum science. Such a sophisticated technology will have great impact on the modernization of robotics; space systems, automotive systems and many other fields. The highly emerging field of nanomedicine according to specialists would bring a dramatic revolution in the present century. However nanomedicine is nothing but an integration of biology, medicine and technology. Thermoelectric materials as been referred earlier also are used in case of implantable medical equipments for generation of electric power sufficient for those equipments.

Propulsion controls

NASA Technical Reports Server (NTRS)

Harkney, R. D.

1980-01-01

Increased system requirements and functional integration with the aircraft have placed an increased demand on control system capability and reliability. To provide these at an affordable cost and weight and because of the rapid advances in electronic technology, hydromechanical systems are being phased out in favor of digital electronic systems. The transition is expected to be orderly from electronic trimming of hydromechanical controls to full authority digital electronic control. Future propulsion system controls will be highly reliable full authority digital electronic with selected component and circuit redundancy to provide the required safety and reliability. Redundancy may include a complete backup control of a different technology for single engine applications. The propulsion control will be required to communicate rapidly with the various flight and fire control avionics as part of an integrated control concept.

Recent progress on biodegradable materials and transient electronics.

PubMed

Li, Rongfeng; Wang, Liu; Kong, Deying; Yin, Lan

2018-09-01

Transient electronics (or biodegradable electronics) is an emerging technology whose key characteristic is an ability to dissolve, resorb, or physically disappear in physiological environments in a controlled manner. Potential applications include eco-friendly sensors, temporary biomedical implants, and data-secure hardware. Biodegradable electronics built with water-soluble, biocompatible active and passive materials can provide multifunctional operations for diagnostic and therapeutic purposes, such as monitoring intracranial pressure, identifying neural networks, assisting wound healing process, etc. This review summarizes the up-to-date materials strategies, manufacturing schemes, and device layouts for biodegradable electronics, and the outlook is discussed at the end. It is expected that the translation of these materials and technologies into clinical settings could potentially provide vital tools that are beneficial for human healthcare.

Electron impact ionization in plasma technologies; studies on atomic boron and BN molecule

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joshi, Foram M., E-mail: foram29@gmail.com; Joshipura, K. N., E-mail: knjoshipura22@gmail.com; Chaudhari, Asha S., E-mail: ashaschaudhari@gmail.com

2016-05-06

Electron impact ionization plays important role in plasma technologies. Relevant cross sections on atomic boron are required to understand the erosion processes in fusion experiments. Boronization of plasma exposed surfaces of tokomaks has proved to be an effective way to produce very pure fusion plasmas. This paper reports comprehensive theoretical investigations on electron scattering with atomic Boron and Boron Nitride in solid phases. Presently we determine total ionization cross-section Q{sub ion} and the summed-electronic excitation cross section ΣQ{sub exc} in a standard quantum mechanical formalism called SCOP and CSP-ic methods. Our calculated cross sections are examined as functions of incidentmore » electron energy along with available comparisons.« less

Incorporating electronic-based and computer-based strategies: graduate nursing courses in administration.

PubMed

Graveley, E; Fullerton, J T

1998-04-01

The use of electronic technology allows faculty to improve their course offerings. Four graduate courses in nursing administration were contemporized to incorporate fundamental computer-based skills that would be expected of graduates in the work setting. Principles of adult learning offered a philosophical foundation that guided course development and revision. Course delivery strategies included computer-assisted instructional modules, e-mail interactive discussion groups, and use of the electronic classroom. Classroom seminar discussions and two-way interactive video conferencing focused on group resolution of problems derived from employment settings and assigned readings. Using these electronic technologies, a variety of courses can be revised to accommodate the learners' needs.

Electronic prescribing in ambulatory practice: promises, pitfalls, and potential solutions.

PubMed

Papshev, D; Peterson, A M

2001-07-01

To examine advantages of and obstacles to electronic prescribing in the ambulatory care environment. MEDLINE and International Pharmaceutical Abstract searches were conducted for the period from January 1980 to September 2000. Key words were electronic prescribing, computerized physician order entry, prior authorization, drug utilization review, and consumer satisfaction. In September 2000, a public search engine (www.google.com) was used to find additional technical information. In addition, pertinent articles were cross-referenced to identify other resources. Articles, symposia proceedings, and organizational position statements published in the United States on electronic prescribing and automation in healthcare are cited. Electronic prescribing can eliminate the time gap between point of care and point of service, reduce medication errors, improve quality of care, and increase patient satisfaction. Considerable funding requirements, segmentation of healthcare markets, lack of technology standardization, providers' resistance to change, and regulatory indecisiveness create boundaries to the widespread use of automated prescribing. The potential solutions include establishing a standardizing warehouse or a router and gaining stakeholder support in implementation of the technology. Electronic prescribing can provide immense benefits to healthcare providers, patients, and managed care. Resolution of several obstacles that limit feasibility of this technology will determine its future.

A Review of Optical NDT Technologies

PubMed Central

Zhu, Yong-Kai; Tian, Gui-Yun; Lu, Rong-Sheng; Zhang, Hong

2011-01-01

Optical non-destructive testing (NDT) has gained more and more attention in recent years, mainly because of its non-destructive imaging characteristics with high precision and sensitivity. This paper provides a review of the main optical NDT technologies, including fibre optics, electronic speckle, infrared thermography, endoscopic and terahertz technology. Among them, fibre optics features easy integration and embedding, electronic speckle focuses on whole-field high precision detection, infrared thermography has unique advantages for tests of combined materials, endoscopic technology provides images of the internal surface of the object directly, and terahertz technology opens a new direction of internal NDT because of its excellent penetration capability to most of non-metallic materials. Typical engineering applications of these technologies are illustrated, with a brief introduction of the history and discussion of recent progress. PMID:22164045

New trend in electron holography

NASA Astrophysics Data System (ADS)

Tanigaki, Toshiaki; Harada, Ken; Murakami, Yasukazu; Niitsu, Kodai; Akashi, Tetsuya; Takahashi, Yoshio; Sugawara, Akira; Shindo, Daisuke

2016-06-01

Electron holography using a coherent electron wave is a promising technique for high-resolution visualization of electromagnetic fields in and around objects. The capability of electron holography has been enhanced by the development of new technologies and has thus become an even more powerful tool for exploring scientific frontiers. This review introduces these technologies including split-illumination electron holography and vector-field electron tomography. Split-illumination electron holography, which uses separated coherent waves, overcomes the limits imposed by the lateral coherence requirement for electron waves in electron holography. Areas that are difficult to observe using conventional electron holography are now observable. Exemplified applications include observing a singular magnetic domain wall in electrical steel sheets, local magnetizations at anti-phase boundaries, and electrostatic potentials in metal-oxide-semiconductor field-effect transistors. Vector-field electron tomography can be used to visualize magnetic vectors in three dimensions. Two components of the vectors are reconstructed using dual-axis tomography, and the remaining one is calculated using div B   =  0. A high-voltage electron microscope can be used to achieve precise magnetic reconstruction. For example, magnetic vortices have been visualized using a 1 MV holography electron microscope.

42 CFR 495.302 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... AND CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements... thereof by the State agency. Acquisition means to acquire health information technology (HIT) equipment or... technology; (2) Install or commence utilization of certified EHR technology capable of meeting meaningful use...

Practical applications of interactive voice technologies: Some accomplishments and prospects

NASA Technical Reports Server (NTRS)

Grady, Michael W.; Hicklin, M. B.; Porter, J. E.

1977-01-01

A technology assessment of the application of computers and electronics to complex systems is presented. Three existing systems which utilize voice technology (speech recognition and speech generation) are described. Future directions in voice technology are also described.

High Temperature Wireless Communication And Electronics For Harsh Environment Applications

NASA Technical Reports Server (NTRS)

Hunter, G. W.; Neudeck, P. G.; Beheim, G. M.; Ponchak, G. E.; Chen, L.-Y

2007-01-01

In order for future aerospace propulsion systems to meet the increasing requirements for decreased maintenance, improved capability, and increased safety, the inclusion of intelligence into the propulsion system design and operation becomes necessary. These propulsion systems will have to incorporate technology that will monitor propulsion component conditions, analyze the incoming data, and modify operating parameters to optimize propulsion system operations. This implies the development of sensors, actuators, and electronics, with associated packaging, that will be able to operate under the harsh environments present in an engine. However, given the harsh environments inherent in propulsion systems, the development of engine-compatible electronics and sensors is not straightforward. The ability of a sensor system to operate in a given environment often depends as much on the technologies supporting the sensor element as the element itself. If the supporting technology cannot handle the application, then no matter how good the sensor is itself, the sensor system will fail. An example is high temperature environments where supporting technologies are often not capable of operation in engine conditions. Further, for every sensor going into an engine environment, i.e., for every new piece of hardware that improves the in-situ intelligence of the components, communication wires almost always must follow. The communication wires may be within or between parts, or from the engine to the controller. As more hardware is added, more wires, weight, complexity, and potential for unreliability is also introduced. Thus, wireless communication combined with in-situ processing of data would significantly improve the ability to include sensors into high temperature systems and thus lead toward more intelligent engine systems. NASA Glenn Research Center (GRC) is presently leading the development of electronics, communication systems, and sensors capable of prolonged stable operation in harsh 500C environments. This has included world record operation of SiC-based transistor technology (including packaging) that has demonstrated continuous electrical operation at 500C for over 2000 hours. Based on SiC electronics, development of high temperature wireless communication has been on-going. This work has concentrated on maturing the SiC electronic devices for communication purposes as well as the passive components such as resistors and capacitors needed to enable a high temperature wireless system. The objective is to eliminate wires associated with high temperature sensors which add weight to a vehicle and can be a cause of sensor unreliability. This paper discusses the development of SiC based electronics and wireless communications technology for harsh environment applications such as propulsion health management systems and in Venus missions. A brief overview of the future directions in sensor technology is given including maturing of near-room temperature "Lick and Stick" leak sensor technology for possible implementation in the Crew Launch Vehicle program. Then an overview of high temperature electronics and the development of high temperature communication systems is presented. The maturity of related technologies such as sensor and packaging will also be discussed. It is concluded that a significant component of efforts to improve the intelligence of harsh environment operating systems is the development and implementation of high temperature wireless technology

Electron beam technologies in Poland state of the art and possibilities of development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wojcicki, S.

1994-12-31

The recent state of high energy electron beam /EB/ used for metals melting and welding in Poland has been presented. Some typical construction of EB furnaces and EB welding machines designed and constructed in Institute of Vacuum Technology in Warsaw are shown. The examples of their application has also been described.

From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

ERIC Educational Resources Information Center

Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

2017-01-01

In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

Theoretical and practical considerations for teaching diagnostic electronic-nose technologies to clinical laboratory technicians

Treesearch

Alphus D. Wilson

2012-01-01

The rapid development of new electronic technologies and instruments, utilized to perform many current clinical operations in the biomedical field, is changing the way medical health care is delivered to patients. The majority of test results from laboratory analyses, performed with these analytical instruments often prior to clinical examinations, are frequently used...

A Proposal to Integrate the Management of Electronic Waste into the Curriculum of Primary Schools

ERIC Educational Resources Information Center

de Jager, Thelma

2015-01-01

Today's children are growing up in an environmentally damaged and technology orientated world. The advent and advances of technology, has resulted in the production of millions of electronic devices, which eventually become waste when they reach their end-of-life. These devices contain toxic components that are not only polluting the environment…

How to Make "The Fourth Revolution". Human Factors in the Adoption of Electronic Instructional Aids. Memorandum Number 73/5.

ERIC Educational Resources Information Center

Demerath, Nicholas J.; Daniels, Lois A.

The prospects and problems associated with getting American higher education to utilize more fully electronic technologies are examined. Part I surveys the diversity of higher education and its students and concludes that technological applications will have to be correspondingly varied, despite the tendency to "massification". Part II, consisting…

Internet and Electronic Information Management

DTIC Science & Technology

2003-04-01

technologies ) and information markets (buying and selling information ), and the competitors’ success or failures. Such factors are beyond the control of... technology , and 1-19 market pressures. They have to cooperate with other entities within their organizations to develop more innovative information ...UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP014048 TITLE: Internet and Electronic Information Management

THE ROLE OF THE PHYSICAL SCIENCES IN ELECTRICAL-ELECTRONIC TECHNOLOGY. PROGRESS REPORT.

ERIC Educational Resources Information Center

BARLOW, MELVIN L.; SCHILL, WILLIAM J.

TO DETERMINE THE RELATIVE IMPORTANCE OF CHEMISTRY AND PHYSICS FOR INSTRUCTION IN ELECTRICAL AND ELECTRONIC TECHNOLOGY, 51 TECHNICAL WORKERS, 51 JUNIOR COLLEGE INSTRUCTORS, AND 11 EXPERTS RATED 240 SCIENTIFIC PRINCIPLES AS TO THEIR VALUE IN A TECHNICIAN'S WORK. THE THREE GROUPS AGREED ON THE RANK ORDER OF 15 TOPICS--(1) CURRENT ELECTRICITY, (2)…

Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

ERIC Educational Resources Information Center

Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

2011-01-01

This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

NASA Tech Briefs, August 1995. Volume 19, No. 8

NASA Technical Reports Server (NTRS)

1995-01-01

There is a special focus on computer graphics and simulation in this issue. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer programs, Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. There is a section on for Laser Technology, which includes a feature on Moving closer to the suns power.

Technologies for Future Precision Strike Missile Systems (les Technologies des futurs systemes de missiles pour frappe de precision)

DTIC Science & Technology

2001-07-01

hardware - in - loop (HWL) simulation is also developed...Firings / Engine Tests Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model...Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model Model

NASA Tech Briefs Index, 1976. [bibliography

NASA Technical Reports Server (NTRS)

1976-01-01

Abstracts of new technology derived from the research and development activities of the National Aeronautics and Space Administration are presented. Emphasis is placed on information considered likely to be transferrable across industrial, regional, or disciplinary lines. Subject matter covered includes: electronic components and circuits; electronic systems; physical sciences; materials; life sciences; mechanics; machinery; fabrication technology; and mathematics and information sciences.

Advances in electronic-nose technologies developed for biomedical applications

Treesearch

Dan Wilson; Manuela Baietto

2011-01-01

The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and...

Air Force Manufacturing Technology. Year 2000 Project Book

DTIC Science & Technology

2000-01-01

Electronic Warfare Component Manufacturing 13 National Center for Manufacturing Science 14 Product Research Market Analysis System 15 Electronics Acoustic...other agile organizations that can respond to rapidly changing market demands. Approach This program demonstrated and evaluated the advanced design...production worker contact with customers and suppliers; shopfloor identification of new technologies, markets , and products; and strategic planning to assure

International Border Electronic Clearance -- IBEX : evaluation report

DOT National Transportation Integrated Search

1998-07-01

The International Border Electronic Crossing (IBEX) system implemented in this operational test was intended to demonstrate the integration of electronic information systems and technologies aimed at facilitating the safe, efficient movement of goods...

Microsystems, Space Qualified Electronics and Mobile Sensor Platforms for Harsh Environment Applications and Planetary Exploration

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Okojie, Robert S.; Krasowski, Michael J.; Beheim, Glenn M.; Fralick, Gustave C.; Wrbanek, John D.; Greenberg, Paul S.; Xu, Jennifer

2007-01-01

NASA Glenn Research Center is presently developing and applying a range of sensor and electronic technologies that can enable future planetary missions. These include space qualified instruments and electronics, high temperature sensors for Venus missions, mobile sensor platforms, and Microsystems for detection of a range of chemical species and particulates. A discussion of each technology area and its level of maturity is given. It is concluded that there is a strong need for low power devices which can be mobile and provide substantial characterization of the planetary environment where and when needed. While a given mission will require tailoring of the technology for the application, basic tools which can enable new planetary missions are being developed.

Utilization of information technology in eastern North Carolina physician practices: determining the existence of a digital divide.

PubMed

Rosenthal, David A; Layman, Elizabeth J

2008-02-13

The United States Department of Health and Human Services (DHHS) has emphasized the importance of utilizing health information technologies, thus making the availability of electronic resources critical for physicians across the country. However, few empirical assessments exist regarding the current status of computerization and utilization of electronic resources in physician offices and physicians' perceptions of the advantages and disadvantages of computerization. Through a survey of physicians' utilization and perceptions of health information technology, this study found that a "digital divide" existed for eastern North Carolina physicians in smaller physician practices. The physicians in smaller practices were less likely to utilize or be interested in utilizing electronic health records, word processing applications, and the Internet.

Factors influencing the adoption of health information technologies: a systematic review

PubMed Central

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-01-01

Introduction The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. Methods This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004–2014 period. Results The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. Conclusion By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased. PMID:27757179

Factors influencing the adoption of health information technologies: a systematic review.

PubMed

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-08-01

The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004-2014 period. The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased.

Generation of a femtosecond electron microbunch train from a photocathode using twofold Michelson interferometer

NASA Astrophysics Data System (ADS)

Shevelev, M.; Aryshev, A.; Terunuma, N.; Urakawa, J.

2017-10-01

The interest in producing ultrashort electron bunches has risen sharply among scientists working on the design of high-gradient wakefield accelerators. One attractive approach generating electron bunches is to illuminate a photocathode with a train of femtosecond laser pulses. In this paper we describe the design and testing of a laser system for an rf gun based on a commercial titanium-sapphire laser technology. The technology allows the production of four femtosecond laser pulses with a continuously variable pulse delay. We also use the designed system to demonstrate the experimental generation of an electron microbunch train obtained by illuminating a cesium-telluride semiconductor photocathode. We use conventional diagnostics to characterize the electron microbunches produced and confirm that it may be possible to control the main parameter of an electron microbunch train.

Biological photovoltaics: intra- and extra-cellular electron transport by cyanobacteria.

PubMed

Bradley, Robert W; Bombelli, Paolo; Rowden, Stephen J L; Howe, Christopher J

2012-12-01

A large variety of new energy-generating technologies are being developed in an effort to reduce global dependence on fossil fuels, and to reduce the carbon footprint of energy generation. The term 'biological photovoltaic system' encompasses a broad range of technologies which all employ biological material that can harness light energy to split water, and then transfer the resulting electrons to an anode for power generation or electrosynthesis. The use of whole cyanobacterial cells is a good compromise between the requirements of the biological material to be simply organized and transfer electrons efficiently to the anode, and also to be robust and able to self-assemble and self-repair. The principle that photosynthetic bacteria can generate and transfer electrons directly or indirectly to an anode has been demonstrated by a number of groups, although the power output obtained from these devices is too low for biological photovoltaic devices to be useful outside the laboratory. Understanding how photosynthetically generated electrons are transferred through and out of the organism is key to improving power output, and investigations on this aspect of the technology are the main focus of the present review.

Recent Progress in the Development of Printed Thin-Film Transistors and Circuits with High-Resolution Printing Technology.

PubMed

Fukuda, Kenjiro; Someya, Takao

2017-07-01

Printed electronics enable the fabrication of large-scale, low-cost electronic devices and systems, and thus offer significant possibilities in terms of developing new electronics/optics applications in various fields. Almost all electronic applications require information processing using logic circuits. Hence, realizing the high-speed operation of logic circuits is also important for printed devices. This report summarizes recent progress in the development of printed thin-film transistors (TFTs) and integrated circuits in terms of materials, printing technologies, and applications. The first part of this report gives an overview of the development of functional inks such as semiconductors, electrodes, and dielectrics. The second part discusses high-resolution printing technologies and strategies to enable high-resolution patterning. The main focus of this report is on obtaining printed electrodes with high-resolution patterning and the electrical performance of printed TFTs using such printed electrodes. In the final part, some applications of printed electronics are introduced to exemplify their potential. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electronic Health Services

PubMed Central

Khalil, Mounir M; Jones, Ray

2007-01-01

Information and communication technologies have made dramatic changes in our lives. Healthcare communities also made use of these technologies. Using computerized medical knowledge, electronic patients’ information and telecommunications a lot of applications are now established throughout the world. These include better ways of information management, remote education, telemedicine and public services. Yet, a lot of people don't know about these technologies and their applications. Understanding the concepts and ideologies behind these terms, knowing how they will be implemented, what is it like to use them and what benefit will be gained, are basic knowledge steps approaching these technologies. Difficulties using these services, especially in developing countries should not be neglected or underestimated. PMID:21503245

School Technology Grows Up.

ERIC Educational Resources Information Center

Vail, Kathleen

2003-01-01

Practitioners and researchers in the education technology field asked to give their vision of the future list laptop computers, personal digital assistants, electronic testing, wireless networking, and multimedia technology among the technology advances headed soon for schools. A sidebar lists 12 online resources. (MLF)

Health information technology: standards, implementation specifications, and certification criteria for electronic health record technology, 2014 edition; revisions to the permanent certification program for health information technology. Final rule.

PubMed

2012-09-04

With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

Wibree: wireless communication technology

NASA Astrophysics Data System (ADS)

Fernandes e Fizardo, Trima Piedade

2011-12-01

Nowadays everywhere we come across electronic devices and now the world has become entirely mobile with so many new electronic equipments. The number of computing and telecommunications devices is increasing and consequently the focus on how to connect them to each other. The usual solution is to connect the device with cables or using infra red light to make file transfer and synchronizations possible but infrared light requires line of sight. To solve these problems a new technology,Wibree radio technology complements other local connectivity technologies, consuming only a fraction of the power compared to other radio technologies, enabling smaller and less costly implementations and being easy to integrate with Bluetooth solutions, Furthermore it can be also used to enable communication between several units such as small radio LANs.This paper focuses on why this technology has got large attention although there are pro's and con's with respect to other technologies.

Teacher Perceptions of Electronic Portfolios as a Technology Integration Tool

ERIC Educational Resources Information Center

Blackwell, John P., III.

2013-01-01

This qualitative case study explored the problem that teachers' attitudes and perceptions about technology often serve as barriers to successful technology integration in elementary school classrooms. Trends have showed that technology teachers directly responsible for teaching students technology skills are being laid off due to budget cuts…

Electronic Data Interchange: Using Technology to Exchange Transcripts.

ERIC Educational Resources Information Center

Stewart, John T.

1994-01-01

Describes the Florida Automated System for Transferring Educational Records (FASTER) project, which permits the electronic exchange of student transcripts; uses of similar electronic data interchange (EDI) programs in other states; and the national SPEEDE/ExPRESS project, which uses a standard format for transferring electronic transcripts.…

Electronic Mail for Personal Computers: Development Issues.

ERIC Educational Resources Information Center

Tomer, Christinger

1994-01-01

Examines competing, commercially developed electronic mail programs and how these technologies will affect the functionality and quality of electronic mail. How new standards for client-server mail systems are likely to enhance messaging capabilities and the use of electronic mail for information retrieval are considered. (Contains eight…

Random polycrystals of grains containing cracks: Model ofquasistatic elastic behavior for fractured systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berryman, James G.; Grechka, Vladimir

2006-07-08

A model study on fractured systems was performed using aconcept that treats isotropic cracked systems as ensembles of crackedgrains by analogy to isotropic polycrystalline elastic media. Theapproach has two advantages: (a) Averaging performed is ensembleaveraging, thus avoiding the criticism legitimately leveled at mosteffective medium theories of quasistatic elastic behavior for crackedmedia based on volume concentrations of inclusions. Since crack effectsare largely independent of the volume they occupy in the composite, sucha non-volume-based method offers an appealingly simple modelingalternative. (b) The second advantage is that both polycrystals andfractured media are stiffer than might otherwise be expected, due tonatural bridging effects ofmore » the strong components. These same effectshave also often been interpreted as crack-crack screening inhigh-crack-density fractured media, but there is no inherent conflictbetween these two interpretations of this phenomenon. Results of thestudy are somewhat mixed. The spread in elastic constants observed in aset of numerical experiments is found to be very comparable to the spreadin values contained between the Reuss and Voigt bounds for thepolycrystal model. However, computed Hashin-Shtrikman bounds are much tootight to be in agreement with the numerical data, showing thatpolycrystals of cracked grains tend to violate some implicit assumptionsof the Hashin-Shtrikman bounding approach. However, the self-consistentestimates obtained for the random polycrystal model are nevertheless verygood estimators of the observed average behavior.« less

Electronic publishing: opportunities and challenges for clinical linguistics and phonetics.

PubMed

Powell, Thomas W; Müller, Nicole; Ball, Martin J

2003-01-01

This paper discusses the contributions of informatics technology to the field of clinical linguistics and phonetics. The electronic publication of research reports and books has facilitated both the dissemination and the retrieval of scientific information. Electronic archives of speech and language corpora, too, stimulate research efforts. Although technology provides many opportunities, there remain significant challenges. Establishment and maintenance of scientific archives is largely dependent upon volunteer efforts, and there are few standards to ensure long-term access. Coordinated efforts and peer review are necessary to ensure utility and quality.

Trends in solid state electronics, part 2

NASA Technical Reports Server (NTRS)

Gassaway, J. D.

1972-01-01

Developments in the fields of semiconductors and magnetics are surveyed. Materials, devices, theory, and fabrication technology are discussed. Important events up until the present time are reported, and events are interpreted through historical perspective. A brief analysis of forces which have driven the development of today's electronic technology and some projections of present trends are given. More detailed discussions are presented for four areas of contemporary interest: amorphous semiconductors, bubble domain devices, charge-coupled devices, and electron and ion beam techniques. Beam addressed magnetic memories are reviewed to a lesser extent.

Canine olfaction and electronic nose detection of volatile organic compounds in the detection of cancer: a review.

PubMed

Brooks, Spencer W; Moore, Daniel R; Marzouk, Evan B; Glenn, Frasier R; Hallock, Robert M

2015-01-01

Olfactory cancer detection shows promise as an affordable, precise, and noninvasive way to screen for cancer. This review focuses on two methods of olfactory cancer detection: first, the ability of canines to differentiate between cancerous and healthy individuals through the use of biological samples and second, electronic nose technology that uses chemical sensors to detect known biomarkers in exhaled breath. This review summarizes and critiques past research and outlines future directions to improve understanding of both canine olfaction and electronic nose technology.