Quality of outpatient clinical notes: a stakeholder definition derived through qualitative research.

PubMed

Hanson, Janice L; Stephens, Mark B; Pangaro, Louis N; Gimbel, Ronald W

2012-11-19

There are no empirically-grounded criteria or tools to define or benchmark the quality of outpatient clinical documentation. Outpatient clinical notes document care, communicate treatment plans and support patient safety, medical education, medico-legal investigations and reimbursement. Accurately describing and assessing quality of clinical documentation is a necessary improvement in an increasingly team-based healthcare delivery system. In this paper we describe the quality of outpatient clinical notes from the perspective of multiple stakeholders. Using purposeful sampling for maximum diversity, we conducted focus groups and individual interviews with clinicians, nursing and ancillary staff, patients, and healthcare administrators at six federal health care facilities between 2009 and 2011. All sessions were audio-recorded, transcribed and qualitatively analyzed using open, axial and selective coding. The 163 participants included 61 clinicians, 52 nurse/ancillary staff, 31 patients and 19 administrative staff. Three organizing themes emerged: 1) characteristics of quality in clinical notes, 2) desired elements within the clinical notes and 3) system supports to improve the quality of clinical notes. We identified 11 codes to describe characteristics of clinical notes, 20 codes to describe desired elements in quality clinical notes and 11 codes to describe clinical system elements that support quality when writing clinical notes. While there was substantial overlap between the aspects of quality described by the four stakeholder groups, only clinicians and administrators identified ease of translation into billing codes as an important characteristic of a quality note. Only patients rated prioritization of their medical problems as an aspect of quality. Nurses included care and education delivered to the patient, information added by the patient, interdisciplinary information, and infection alerts as important content. Perspectives of these four stakeholder groups provide a comprehensive description of quality in outpatient clinical documentation. The resulting description of characteristics and content necessary for quality notes provides a research-based foundation for assessing the quality of clinical documentation in outpatient health care settings.

Documentation of a graphical display program for the saturated- unsaturated transport (SUTRA) finite-element simulation model

USGS Publications Warehouse

Souza, W.R.

1987-01-01

This report documents a graphical display program for the U. S. Geological Survey finite-element groundwater flow and solute transport model. Graphic features of the program, SUTRA-PLOT (SUTRA-PLOT = saturated/unsaturated transport), include: (1) plots of the finite-element mesh, (2) velocity vector plots, (3) contour plots of pressure, solute concentration, temperature, or saturation, and (4) a finite-element interpolator for gridding data prior to contouring. SUTRA-PLOT is written in FORTRAN 77 on a PRIME 750 computer system, and requires Version 9.0 or higher of the DISSPLA graphics library. The program requires two input files: the SUTRA input data list and the SUTRA simulation output listing. The program is menu driven and specifications for individual types of plots are entered and may be edited interactively. Installation instruction, a source code listing, and a description of the computer code are given. Six examples of plotting applications are used to demonstrate various features of the plotting program. (Author 's abstract)

Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A) Structural Math Model - A1

NASA Technical Reports Server (NTRS)

Ely, W.

1996-01-01

This report presents the description for the NASTRAN finite element for the AMSU-A1 module. The purpose of this report is to document the NASTRAN bulk data deck, transmitted under separate cover. The structural Math Model is to be used by the spacecraft contractor for dynamic loads analysis.

Fiscal Year 1986 Technical Objective Document (TOD).

DTIC Science & Technology

1986-03-01

abilties superior to other IR and manual turrets. - START DATE: FY 88 END DATE: FY 90" PROJECT TITLE: COMPOSITE METAL FIRES EE 62:06 JON: 2673XXXX...TECHNOLOGY: FIRE ELEMENT: INTERACTION DESCRIPTION (TECHNICAL OBJECTIVE) Evaluate a new series of agents "BORALONS" capable of extinguishing metal fires and...PROJECT TITLE: COMPOSITE METAL FIRES PE: 63723 JON: 2104XXXX

Contabilidad Elemental e Intermedia. Prontuario. Documento de Trabajo (Elementary and Intermediate Accounting. Handbook. Working Document).

ERIC Educational Resources Information Center

Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

This handbook for elementary and intermediate accounting is intended for teaching the basics of recording and calculating business transactions to students preparing to be accounting clerks. The guide begins with a description of the 2-semester course, a list of competencies to be developed, and the terminal objectives. The course outline for…

Description of the AILS Alerting Algorithm

NASA Technical Reports Server (NTRS)

Samanant, Paul; Jackson, Mike

2000-01-01

This document provides a complete description of the Airborne Information for Lateral Spacing (AILS) alerting algorithms. The purpose of AILS is to provide separation assurance between aircraft during simultaneous approaches to closely spaced parallel runways. AILS will allow independent approaches to be flown in such situations where dependent approaches were previously required (typically under Instrument Meteorological Conditions (IMC)). This is achieved by providing multiple levels of alerting for pairs of aircraft that are in parallel approach situations. This document#s scope is comprehensive and covers everything from general overviews, definitions, and concepts down to algorithmic elements and equations. The entire algorithm is presented in complete and detailed pseudo-code format. This can be used by software programmers to program AILS into a software language. Additional supporting information is provided in the form of coordinate frame definitions, data requirements, calling requirements as well as all necessary pre-processing and post-processing requirements. This is important and required information for the implementation of AILS into an analysis, a simulation, or a real-time system.

The semantics of Chemical Markup Language (CML): dictionaries and conventions.

PubMed

Murray-Rust, Peter; Townsend, Joe A; Adams, Sam E; Phadungsukanan, Weerapong; Thomas, Jens

2011-10-14

The semantic architecture of CML consists of conventions, dictionaries and units. The conventions conform to a top-level specification and each convention can constrain compliant documents through machine-processing (validation). Dictionaries conform to a dictionary specification which also imposes machine validation on the dictionaries. Each dictionary can also be used to validate data in a CML document, and provide human-readable descriptions. An additional set of conventions and dictionaries are used to support scientific units. All conventions, dictionaries and dictionary elements are identifiable and addressable through unique URIs.

The semantics of Chemical Markup Language (CML): dictionaries and conventions

PubMed Central

2011-01-01

The semantic architecture of CML consists of conventions, dictionaries and units. The conventions conform to a top-level specification and each convention can constrain compliant documents through machine-processing (validation). Dictionaries conform to a dictionary specification which also imposes machine validation on the dictionaries. Each dictionary can also be used to validate data in a CML document, and provide human-readable descriptions. An additional set of conventions and dictionaries are used to support scientific units. All conventions, dictionaries and dictionary elements are identifiable and addressable through unique URIs. PMID:21999509

Unveiling the Third Secret of Fátima: μ-XRF quantitative characterization and 2D elemental mapping

NASA Astrophysics Data System (ADS)

Manso, M.; Pessanha, S.; Guerra, M.; Figueirinhas, J. L.; Santos, J. P.; Carvalho, M. L.

2017-04-01

A set of five manuscripts written by Sister Lúcia between 1941 and 1944 were under study. Among them is the one that contains the description of the third part of the Secret of Fátima also known as the Third Secret of Fátima. In this work, a characterization of the paper and the ink used in these documents was achieved using micro-X-ray fluorescence spectrometry. Quantitative results were obtained for P, K, Ca, Fe, Cu and Zn, revealing different paper composition and Zn in the inks. 2D elemental maps confirmed that Zn was present in the five documents ink and that the manuscript revealing the Third Secret of Fátima contained no erasures or alteration attempts to the original manuscript.

NASA standard: Trend analysis techniques

NASA Technical Reports Server (NTRS)

1990-01-01

Descriptive and analytical techniques for NASA trend analysis applications are presented in this standard. Trend analysis is applicable in all organizational elements of NASA connected with, or supporting, developmental/operational programs. This document should be consulted for any data analysis activity requiring the identification or interpretation of trends. Trend analysis is neither a precise term nor a circumscribed methodology: it generally connotes quantitative analysis of time-series data. For NASA activities, the appropriate and applicable techniques include descriptive and graphical statistics, and the fitting or modeling of data by linear, quadratic, and exponential models. Usually, but not always, the data is time-series in nature. Concepts such as autocorrelation and techniques such as Box-Jenkins time-series analysis would only rarely apply and are not included in this document. The basic ideas needed for qualitative and quantitative assessment of trends along with relevant examples are presented.

Readability and Content Assessment of Informed Consent Forms for Phase II-IV Clinical Trials in China

PubMed Central

Wen, Gaiyan; Liu, Xinchun; Huang, Lihua; Shu, Jingxian; Xu, Nana; Chen, Ruifang; Huang, Zhijun; Yang, Guoping; Wang, Xiaomin; Xiang, Yuxia; Lu, Yao; Yuan, Hong

2016-01-01

Purpose To explore the readability and content integrity of informed consent forms (ICFs) used in China and to compare the quality of Chinese local ICFs with that of international ICFs. Methods The length, readability and content of 155 consent documents from phase II-IV drug clinical trials from the Third Xiangya Hospital Ethics Committee from November 2009 to January 2015 were evaluated. Reading difficulty was tested using a readability formula adapted for the Chinese language. An ICF checklist containing 27 required elements was successfully constructed to evaluate content integrity. The description of alternatives to participation was assessed. The quality of ICFs from different sponsorships were also compared. Results Among the 155 evaluable trials, the ICFs had a median length of 5286 words, corresponding to 7 pages. The median readability score was 4.31 (4.02–4.41), with 63.9% at the 2nd level and 36.1% at the 3rd level. Five of the 27 elements were frequently neglected. The average score for the description of alternatives to participation was 1.06, and 27.7% of the ICFs did not mention any alternatives. Compared with Chinese local ICFs, international ICFs were longer, more readable and contained more of the required elements (P < 0.05). Conclusion The ICFs used in China were difficult to read for most participants. These forms had poor description of alternatives to participation, and failed to provide a high degree of information disclosure, including an explanation of informed consent, follow-up processing of the data/sample, inclusion/exclusion criteria, double blinding, and unpredictable risks. International ICFs had better readability and content integrity than Chinese local ICFs. More efforts should thus be made to improve the quality of consent documents in China. PMID:27701471

Readability and Content Assessment of Informed Consent Forms for Phase II-IV Clinical Trials in China.

PubMed

Wen, Gaiyan; Liu, Xinchun; Huang, Lihua; Shu, Jingxian; Xu, Nana; Chen, Ruifang; Huang, Zhijun; Yang, Guoping; Wang, Xiaomin; Xiang, Yuxia; Lu, Yao; Yuan, Hong

2016-01-01

To explore the readability and content integrity of informed consent forms (ICFs) used in China and to compare the quality of Chinese local ICFs with that of international ICFs. The length, readability and content of 155 consent documents from phase II-IV drug clinical trials from the Third Xiangya Hospital Ethics Committee from November 2009 to January 2015 were evaluated. Reading difficulty was tested using a readability formula adapted for the Chinese language. An ICF checklist containing 27 required elements was successfully constructed to evaluate content integrity. The description of alternatives to participation was assessed. The quality of ICFs from different sponsorships were also compared. Among the 155 evaluable trials, the ICFs had a median length of 5286 words, corresponding to 7 pages. The median readability score was 4.31 (4.02-4.41), with 63.9% at the 2nd level and 36.1% at the 3rd level. Five of the 27 elements were frequently neglected. The average score for the description of alternatives to participation was 1.06, and 27.7% of the ICFs did not mention any alternatives. Compared with Chinese local ICFs, international ICFs were longer, more readable and contained more of the required elements (P < 0.05). The ICFs used in China were difficult to read for most participants. These forms had poor description of alternatives to participation, and failed to provide a high degree of information disclosure, including an explanation of informed consent, follow-up processing of the data/sample, inclusion/exclusion criteria, double blinding, and unpredictable risks. International ICFs had better readability and content integrity than Chinese local ICFs. More efforts should thus be made to improve the quality of consent documents in China.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics, appendixes

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Appendixes for Volume 2 (Part 2) of a seven volume Satellite (SPS) report are presented. The document contains two appendixes. The first is a SPS work breakdown structure dictionary. The second gives SPS cost estimating relationships and contains the cost analyses and a description of cost elements that comprise the SPS program.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document. Volume 1: Major trades. Book 2: Draft final

NASA Technical Reports Server (NTRS)

1991-01-01

Topics addressed are: (1) an artificial gravity assessment study; (2) Mars mission transport vehicle (MTV)/Mars excursion vehicle (MEV) mission scenarios; (3) aerobrake issues; (4) equipment life and self-check; (5) earth-to-orbit (ETO) heavy lift launch vehicle (HLLV) definition trades; and (6) risk analysis.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 2: Cryo/aerobrake vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The cryogenic/aerobrake (CAB) and the cryogenic all-propulsive (CAP) concept designs developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study are presented. The evolution of the CAB and CAP concepts is described along with the requirements, guidelines and assumptions for the designs. Operating modes and options are defined and systems descriptions of the vehicles are presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 5: Nuclear electric propulsion vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The nuclear electric propulsion (NEP) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study is presented. The evolution of the NEP concept is described along with the requirements, guidelines, and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

Electronic health record systems in ophthalmology: impact on clinical documentation.

PubMed

Sanders, David S; Lattin, Daniel J; Read-Brown, Sarah; Tu, Daniel C; Wilson, David J; Hwang, Thomas S; Morrison, John C; Yackel, Thomas R; Chiang, Michael F

2013-09-01

To evaluate quantitative and qualitative differences in documentation of the ophthalmic examination between paper and electronic health record (EHR) systems. Comparative case series. One hundred fifty consecutive pairs of matched paper and EHR notes, documented by 3 attending ophthalmologist providers. An academic ophthalmology department implemented an EHR system in 2006. Database queries were performed to identify cases in which the same problems were documented by the same provider on different dates, using paper versus EHR methods. This was done for 50 consecutive pairs of examinations in 3 different diseases: age-related macular degeneration (AMD), glaucoma, and pigmented choroidal lesions (PCLs). Quantitative measures were used to compare completeness of documenting the complete ophthalmologic examination, as well as disease-specific critical findings using paper versus an EHR system. Qualitative differences in paper versus EHR documentation were illustrated by selecting representative paired examples. (1) Documentation score, defined as the number of examination elements recorded for the slit-lamp examination, fundus examination, and complete ophthalmologic examination and for critical clinical findings for each disease. (2) Paired comparison of qualitative differences in paper versus EHR documentation. For all 3 diseases (AMD, glaucoma, PCL), the number of complete examination findings recorded was significantly lower with paper than the EHR system (P ≤ 0.004). Among the 3 individual examination sections (general, slit lamp, fundus) for the 3 diseases, 5 of the 9 possible combinations had significantly lower mean documentation scores with paper than EHR notes. For 2 of the 3 diseases, the number of critical clinical findings recorded was significantly lower using paper versus EHR notes (P ≤ 0.022). All (150/150) paper notes relied on graphical representations using annotated hand-drawn sketches, whereas no (0/150) EHR notes contained drawings. Instead, the EHR systems documented clinical findings using textual descriptions and interpretations. There were quantitative and qualitative differences in the nature of paper versus EHR documentation of ophthalmic findings in this study. The EHR notes included more complete documentation of examination elements using structured textual descriptions and interpretations, whereas paper notes used graphical representations of findings. The author(s) have no proprietary or commercial interest in any materials discussed in this article. Copyright © 2013 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 1, Theoretical background

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gartling, D.K.

The theoretical and numerical background for the finite element computer program, TORO II, is presented in detail. TORO II is designed for the multi-dimensional analysis of nonlinear, electromagnetic field problems described by the quasi-static form of Maxwell`s equations. A general description of the boundary value problems treated by the program is presented. The finite element formulation and the associated numerical methods used in TORO II are also outlined. Instructions for the use of the code are documented in SAND96-0903; examples of problems analyzed with the code are also provided in the user`s manual. 24 refs., 8 figs.

Introduction of statistical information in a syntactic analyzer for document image recognition

NASA Astrophysics Data System (ADS)

Maroneze, André O.; Coüasnon, Bertrand; Lemaitre, Aurélie

2011-01-01

This paper presents an improvement to document layout analysis systems, offering a possible solution to Sayre's paradox (which states that an element "must be recognized before it can be segmented; and it must be segmented before it can be recognized"). This improvement, based on stochastic parsing, allows integration of statistical information, obtained from recognizers, during syntactic layout analysis. We present how this fusion of numeric and symbolic information in a feedback loop can be applied to syntactic methods to improve document description expressiveness. To limit combinatorial explosion during exploration of solutions, we devised an operator that allows optional activation of the stochastic parsing mechanism. Our evaluation on 1250 handwritten business letters shows this method allows the improvement of global recognition scores.

Space station integrated propulsion and fluid systems study. Space station program fluid management systems databook

NASA Technical Reports Server (NTRS)

Bicknell, B.; Wilson, S.; Dennis, M.; Lydon, M.

1988-01-01

Commonality and integration of propulsion and fluid systems associated with the Space Station elements are being evaluated. The Space Station elements consist of the core station, which includes habitation and laboratory modules, nodes, airlocks, and trusswork; and associated vehicles, platforms, experiments, and payloads. The program is being performed as two discrete tasks. Task 1 investigated the components of the Space Station architecture to determine the feasibility and practicality of commonality and integration among the various propulsion elements. This task was completed. Task 2 is examining integration and commonality among fluid systems which were identified by the Phase B Space Station contractors as being part of the initial operating capability (IOC) and growth Space Station architectures. Requirements and descriptions for reference fluid systems were compiled from Space Station documentation and other sources. The fluid systems being examined are: an experiment gas supply system, an oxygen/hydrogen supply system, an integrated water system, the integrated nitrogen system, and the integrated waste fluids system. Definitions and descriptions of alternate systems were developed, along with analyses and discussions of their benefits and detriments. This databook includes fluid systems descriptions, requirements, schematic diagrams, component lists, and discussions of the fluid systems. In addition, cost comparison are used in some cases to determine the optimum system for a specific task.

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Test act system description

NASA Technical Reports Server (NTRS)

1983-01-01

The engineering and fabrication of the test ACT system, produced in the third program element of the IAAC Project is documented. The system incorporates pitch-augmented stability and wing-load alleviation, plus full authority fly-by-wire control of the elevators. The pitch-augmented stability is designed to have reliability sufficient to allow flight with neutral or negative inherent longitudinal stability.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document. Volume 1: Major trades. Book 1: Draft final

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents trade studies and reference concept designs accomplished during a study of Space Transfer Concepts and Analyses for Exploration Missions (STCAEM). This volume contains the major top level trades, level 2 trades conducted in support of NASA's Lunar/Mars Exploration Program Office, and a synopsis of the vehicles for different propulsion systems under trade consideration. The vehicles are presented in more detail in other volumes of this report. Book 1 of Volume 1 covers the following analyses: lunar/Mars commonality trades, lunar/Mars mission operations, and Mars transfer systems.

The Classical Theory of Composition; From Its Origins to the Present: A Historical Survey (University of North Carolina Studies in Comparative Literature, No. 53.)

ERIC Educational Resources Information Center

Scaglione, Aldo

The major purpose of this study is the descriptive analysis of a large body of literature, mainly technical, which attempts to explain the structure of sentences and ordering of their elements, on the linguistic and artistic levels. It is hoped that this study helps to document the relevance of technical material for the proper understanding of…

Assessing the Representation of Occupation Information in Free-Text Clinical Documents Across Multiple Sources

PubMed Central

Lindemann, Elizabeth A.; Chen, Elizabeth S.; Rajamani, Sripriya; Manohar, Nivedha; Wang, Yan; Melton, Genevieve B.

2017-01-01

There has been increasing recognition of the key role of social determinants like occupation on health. Given the relatively poor understanding of occupation information in electronic health records (EHRs), we sought to characterize occupation information within free-text clinical document sources. From six distinct clinical sources, 868 total occupation-related sentences were identified for the study corpus. Building off approaches from previous studies, refined annotation guidelines were created using the National Institute for Occupational Safety and Health Occupational Data for Health data model with elements added to increase granularity. Our corpus generated 2,005 total annotations representing 39 of 41 entity types from the enhanced data model. Highest frequency entities were: Occupation Description (17.7%); Employment Status – Not Specified (12.5%); Employer Name (11.0%); Subject (9.8%); Industry Description (6.2%). Our findings support the value for standardizing entry of EHR occupation information to improve data quality for improved patient care and secondary uses of this information. PMID:29295142

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the first volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of an introduction, summary/conclusion, site description and assessment, description of facility, and description of operation.« less

Sierra Toolkit Manual Version 4.48.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sierra Toolkit Team

This report provides documentation for the SIERRA Toolkit (STK) modules. STK modules are intended to provide infrastructure that assists the development of computational engineering soft- ware such as finite-element analysis applications. STK includes modules for unstructured-mesh data structures, reading/writing mesh files, geometric proximity search, and various utilities. This document contains a chapter for each module, and each chapter contains overview descriptions and usage examples. Usage examples are primarily code listings which are generated from working test programs that are included in the STK code-base. A goal of this approach is to ensure that the usage examples will not fall outmore » of date. This page intentionally left blank.« less

Documentation for the machine-readable version of A Library of Stellar Spectra (Jacoby, Hunter and Christian 1984)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

The machine readable library as it is currently being distributed from the Astronomical Data Center is described. The library contains digital spectral for 161 stars of spectral classes O through M and luminosity classes 1, 3 and 5 in the wavelength range 3510 A to 7427 A. The resolution is approximately 4.5 A, while the typical photometric uncertainty of each resolution element is approximately 1 percent and broadband variations are 3 percent. The documentation includes a format description, a table of the indigenous characteristics of the magnetic tape file, and a sample listing of logical records exactly as they are recorded on the tape.

Elements of Infoschemata and Cognitive-Beliefs of Historians and History/Social Studies Educators as Reflected in the Goals, Objectives, and Aims They Posit for "History" and the "Study of History" on the Pre-College Level.

ERIC Educational Resources Information Center

Chilcoat, George W.; Ligon, Jerry

Covering teaching, learning activities on the pre-college level, this document reviews more than 200 published articles, chapters, and monographs to examine ideas held by those who teach history. Descriptive statements representing goals, objectives, and rationales relative to history were constructed for the purpose of examining these concepts.…

Main Features of a 3d GIS for a Monumental Complex with AN Historical-Cultural Relevance

NASA Astrophysics Data System (ADS)

Scianna, A.; La Guardia, M.

2017-05-01

The last achievements of technologies in geomatics especially in survey and restitution of 3D models (UAV/drones and laser scanner technologies) generated new procedures and higher standards of quality in representation of archaeological sites. Together with Geomatics, the recent development of Information and Communication Technologies (ICT) strongly contribute to document and the Cultural Heritage (CH). The representation and documentation of CH using these new technologies has became necessary in order to satisfy different needs: - for restorers in order to acquire a deep knowledge of the cultural good and to define possible strategies of restoration; - for the conservation of information, allowing to preserve the 3D geometry of the monumental complex with the integration of descriptions about architectural elements; - for touristic aims, giving the opportunity of sharing CH information on web, allowing users to visit and explore, in a virtual way, monumental complexes, acquiring information details about architectural elements or the history of monumental complex. Looking through these new scenarios, the development of a 3D Geographic Information System (GIS) applied to a cultural good could be, today, an added value of fundamental importance for full description and data management of monumental complexes. In this work, the main features necessary for the correct construction of a 3D GIS of a monumental complex will be analyzed, with a particular focus on the possibilities for creating a standardized procedure to follow.

Developing a Minimum Data Set of the Information Management System for Orthopedic Injuries in Iran

PubMed Central

Ahmadi, Maryam; Mohammadi, Ali; Chraghbaigi, Ramin; Fathi, Taimur; Shojaee Baghini, Mahdieh

2014-01-01

Background: Orthopedic injuries are the most common types of injuries. To identify the main causes of injuries, collecting data in a standard manner at the national level are needed, which justifies necessity of making a minimum data set (MDS). Objectives: The aim of this study was to develop an MDS of the information management system for orthopedic injuries in Iran. Materials and Methods: This descriptive cross-sectional study was performed in 2013. Data were collected from hospitals affiliated with Tehran University of Medical Sciences that had orthopedic department, medical documents centers, legal medicine centers, emergency centers, internet access, and library. Investigated documents were orthopedic injury records in 2012, documents that retrieved from the internet, and printed materials. Records with Random sampling by S22-S99 categories from ICD-10 were selected and the related internet-sourced data were evaluated entirely. Data were collected using a checklist. In order to make a consensus about the data elements, the decision Delphi technique was applied by a questionnaire. The content validity and reliability of the questionnaire were assessed by expert’s opinions and test-retest method, respectively. Results: An MDS of orthopedic injuries were assigned to two categories: administrative category with six classes including 142 data elements, and clinical category with 17 classes including 250 data elements. Conclusions: This study showed that some of the essential data elements included in other country’s MDS or required for organizations and healthcare providers were not included. Therefore, a complete list of an MDS elements was created. Existence of comprehensive data concerning the causes and mechanisms of injuries informs public health policy-makers about injuries occurrence and enables them to take rationale measures to deal with these problems. PMID:25237576

Developing a minimum data set of the information management system for orthopedic injuries in iran.

PubMed

Ahmadi, Maryam; Mohammadi, Ali; Chraghbaigi, Ramin; Fathi, Taimur; Shojaee Baghini, Mahdieh

2014-07-01

Orthopedic injuries are the most common types of injuries. To identify the main causes of injuries, collecting data in a standard manner at the national level are needed, which justifies necessity of making a minimum data set (MDS). The aim of this study was to develop an MDS of the information management system for orthopedic injuries in Iran. This descriptive cross-sectional study was performed in 2013. Data were collected from hospitals affiliated with Tehran University of Medical Sciences that had orthopedic department, medical documents centers, legal medicine centers, emergency centers, internet access, and library. Investigated documents were orthopedic injury records in 2012, documents that retrieved from the internet, and printed materials. Records with Random sampling by S22-S99 categories from ICD-10 were selected and the related internet-sourced data were evaluated entirely. Data were collected using a checklist. In order to make a consensus about the data elements, the decision Delphi technique was applied by a questionnaire. The content validity and reliability of the questionnaire were assessed by expert's opinions and test-retest method, respectively. AN MDS OF ORTHOPEDIC INJURIES WERE ASSIGNED TO TWO CATEGORIES: administrative category with six classes including 142 data elements, and clinical category with 17 classes including 250 data elements. This study showed that some of the essential data elements included in other country's MDS or required for organizations and healthcare providers were not included. Therefore, a complete list of an MDS elements was created. Existence of comprehensive data concerning the causes and mechanisms of injuries informs public health policy-makers about injuries occurrence and enables them to take rationale measures to deal with these problems.

ELAS: A general-purpose computer program for the equilibrium problems of linear structures. Volume 2: Documentation of the program. [subroutines and flow charts

NASA Technical Reports Server (NTRS)

Utku, S.

1969-01-01

A general purpose digital computer program for the in-core solution of linear equilibrium problems of structural mechanics is documented. The program requires minimum input for the description of the problem. The solution is obtained by means of the displacement method and the finite element technique. Almost any geometry and structure may be handled because of the availability of linear, triangular, quadrilateral, tetrahedral, hexahedral, conical, triangular torus, and quadrilateral torus elements. The assumption of piecewise linear deflection distribution insures monotonic convergence of the deflections from the stiffer side with decreasing mesh size. The stresses are provided by the best-fit strain tensors in the least squares at the mesh points where the deflections are given. The selection of local coordinate systems whenever necessary is automatic. The core memory is used by means of dynamic memory allocation, an optional mesh-point relabelling scheme and imposition of the boundary conditions during the assembly time.

Methods for Estimating Environmental Effects and Constraints on NexGen: High Density Case Study

NASA Technical Reports Server (NTRS)

Augustine, S.; Ermatinger, C.; Graham, M.; Thompson, T.

2010-01-01

This document provides a summary of the current methods developed by Metron Aviation for the estimate of environmental effects and constraints on the Next Generation Air Transportation System (NextGen). This body of work incorporates many of the key elements necessary to achieve such an estimate. Each section contains the background and motivation for the technical elements of the work, a description of the methods used, and possible next steps. The current methods described in this document were selected in an attempt to provide a good balance between accuracy and fairly rapid turn around times to best advance Joint Planning and Development Office (JPDO) System Modeling and Analysis Division (SMAD) objectives while also supporting the needs of the JPDO Environmental Working Group (EWG). In particular this document describes methods applied to support the High Density (HD) Case Study performed during the spring of 2008. A reference day (in 2006) is modeled to describe current system capabilities while the future demand is applied to multiple alternatives to analyze system performance. The major variables in the alternatives are operational/procedural capabilities for airport, terminal, and en route airspace along with projected improvements to airframe, engine and navigational equipment.

Performance Assessment for Pump-and-Treat Closure or Transition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Truex, Michael J.; Johnson, Christian D.; Becker, Dave J.

2015-09-29

A structured performance assessment approach is useful to evaluate pump-and-treat (P&T) groundwater remediation, which has been applied at numerous sites. Consistent with the U.S. Environmental Protection Agency’s Groundwater Road Map, performance assessment during remedy implementation may be needed, and should consider remedy optimization, transition to alternative remedies, or remedy closure. In addition, a recent National Research Council study examined groundwater remediation at complex contaminated sites and concluded that it may be beneficial to evaluate remedy performance and the potential need for transition to alternative approaches at these sites. The intent of this document is to provide a structured approach formore » assessing P&T performance to support a decision to optimize, transition, or close a P&T remedy. The process presented in this document for gathering information and performing evaluations to support P&T remedy decisions includes use of decision elements to distinguish between potential outcomes of a remedy decision. Case studies are used to augment descriptions of decision elements and to illustrate each type of outcome identified in the performance assessment approach. The document provides references to resources for tools and other guidance relevant to conducting the P&T assessment.« less

TFaNS Tone Fan Noise Design/Prediction System. Volume 1; System Description, CUP3D Technical Documentation and Manual for Code Developers

NASA Technical Reports Server (NTRS)

Topol, David A.

1999-01-01

TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.

Deep Space Habitat Concept of Operations for Transit Mission Phases

NASA Technical Reports Server (NTRS)

Hoffman, Stephen J.

2011-01-01

The National Aeronautics and Space Administration (NASA) has begun evaluating various mission and system components of possible implementations of what the U.S. Human Spaceflight Plans Committee (also known as the Augustine Committee) has named the flexible path (Anon., 2009). As human spaceflight missions expand further into deep space, the duration of these missions increases to the point where a dedicated crew habitat element appears necessary. There are several destinations included in this flexible path a near Earth asteroid (NEA) mission, a Phobos/Deimos (Ph/D) mission, and a Mars surface exploration mission that all include at least a portion of the total mission in which the crew spends significant periods of time (measured in months) in the deep space environment and are thus candidates for a dedicated habitat element. As one facet of a number of studies being conducted by the Human Spaceflight Architecture Team (HAT) a workshop was conducted to consider how best to define and quantify habitable volume for these future deep space missions. One conclusion reached during this workshop was the need for a description of the scope and scale of these missions and the intended uses of a habitat element. A group was set up to prepare a concept of operations document to address this need. This document describes a concept of operations for a habitat element used for these deep space missions. Although it may eventually be determined that there is significant overlap with this concept of operations and that of a habitat destined for use on planetary surfaces, such as the Moon and Mars, no such presumption is made in this document.

Hgis and Archive Researches: a Tool for the Study of the Ancient Mill Channel of Cesena (italy)

NASA Astrophysics Data System (ADS)

Bitelli, G.; Bartolini, F.; Gatta, G.

2016-06-01

The present study aims to demonstrate the usefulness of GIS to support archive searches and historical studies (e.g. related to industrial archaeology), in the case of an ancient channel for mill powering near Cesena (Emilia-Romagna, Italy), whose history is weaved together with the history of the Compagnia dei Molini di Cesena mill company, the most ancient limited company in Italy. Several historical maps (about 40 sheets in total) inherent the studied area and 80 archive documents (drawings, photos, specifications, administrative acts, newspaper articles), over a period of more than 600 years, were collected. Once digitized, historical maps were analysed, georeferenced and mosaicked where necessary. Subsequently, in all the maps the channel with its four mills and the Savio river were vectorized. All the additional archive documents were digitized, catalogued and stored. Using the QGIS open source platform, a Historical GIS was created, encompassing the current cartographic base and all historical maps, with their vectorized elements; each archive document was linked to the proper historical map, so that the document can be immediately retrieved and visualized. In such a HGIS, the maps form the base for a spatial and temporal navigation, facilitated by a specific interface; the external documents linked to them complete the description of the represented elements. This simple and interactive tool offers a new approach to archive searches, as it allows reconstruction in space and time of the evolution of the ancient channel and the history of this important mill company.

Integrated palliative care in the Spanish context: a systematic review of the literature.

PubMed

Garralda, Eduardo; Hasselaar, Jeroen; Carrasco, José Miguel; Van Beek, Karen; Siouta, Naouma; Csikos, Agnes; Menten, Johan; Centeno, Carlos

2016-05-13

Integrated palliative care (IPC) involves bringing together administrative, organisational, clinical and service aspects in order to achieve continuity of care between all actors involved in the care network of patients receiving palliative care (PC) services. The purpose of this study is to identify literature on IPC in the Spanish context, either in cancer or other advanced chronic diseases. Systematic review of the literature about IPC published in Spain between 1995 and 2013. Sources searched included PubMed, Cochrane Library, Cinahl, the national palliative care Journal (Medicina Paliativa), and Google. Evidence on IPC in care models, pathways, guidelines and other relevant documents were searched. Additionally, data were included from expert sources. Elements of IPC were considered based on the definition of IPC and the Emmanuel´s IPC tool. The main inclusion criterion was a comprehensive description of PC integration. Out of a total of 2,416 titles screened, 49 were included. We found two models describing IPC interventions achieving continuity and appropriateness of care as a result, 12 guidelines or pathways (most of them with a general approach including cancer and non-cancer and showing a theoretical IPC inclusion as measured by Emmanuel's tool) and 35 other significant documents as for their context relevance (17 health strategy documents, 14 analytical studies and 4 descriptive documents). These last documents comprised respectively: regional and national plans with an IPC inclusion evidence, studies focused on IPC into primary care and resource utilisation; and descriptions of fruitful collaboration programmes between PC teams and oncology departments. The results show that explications of IPC in the Spanish literature exist, but that there is insufficient evidence of its impact in clinical practice. This review may be of interest for Spanish-speaking countries and for others seeking to know the status of IPC in the literature in their home nations.

Generating descriptive visual words and visual phrases for large-scale image applications.

PubMed

Zhang, Shiliang; Tian, Qi; Hua, Gang; Huang, Qingming; Gao, Wen

2011-09-01

Bag-of-visual Words (BoWs) representation has been applied for various problems in the fields of multimedia and computer vision. The basic idea is to represent images as visual documents composed of repeatable and distinctive visual elements, which are comparable to the text words. Notwithstanding its great success and wide adoption, visual vocabulary created from single-image local descriptors is often shown to be not as effective as desired. In this paper, descriptive visual words (DVWs) and descriptive visual phrases (DVPs) are proposed as the visual correspondences to text words and phrases, where visual phrases refer to the frequently co-occurring visual word pairs. Since images are the carriers of visual objects and scenes, a descriptive visual element set can be composed by the visual words and their combinations which are effective in representing certain visual objects or scenes. Based on this idea, a general framework is proposed for generating DVWs and DVPs for image applications. In a large-scale image database containing 1506 object and scene categories, the visual words and visual word pairs descriptive to certain objects or scenes are identified and collected as the DVWs and DVPs. Experiments show that the DVWs and DVPs are informative and descriptive and, thus, are more comparable with the text words than the classic visual words. We apply the identified DVWs and DVPs in several applications including large-scale near-duplicated image retrieval, image search re-ranking, and object recognition. The combination of DVW and DVP performs better than the state of the art in large-scale near-duplicated image retrieval in terms of accuracy, efficiency and memory consumption. The proposed image search re-ranking algorithm: DWPRank outperforms the state-of-the-art algorithm by 12.4% in mean average precision and about 11 times faster in efficiency.

Determining post-test risk in a national sample of stress nuclear myocardial perfusion imaging reports: Implications for natural language processing tools.

PubMed

Levy, Andrew E; Shah, Nishant R; Matheny, Michael E; Reeves, Ruth M; Gobbel, Glenn T; Bradley, Steven M

2018-04-25

Reporting standards promote clarity and consistency of stress myocardial perfusion imaging (MPI) reports, but do not require an assessment of post-test risk. Natural Language Processing (NLP) tools could potentially help estimate this risk, yet it is unknown whether reports contain adequate descriptive data to use NLP. Among VA patients who underwent stress MPI and coronary angiography between January 1, 2009 and December 31, 2011, 99 stress test reports were randomly selected for analysis. Two reviewers independently categorized each report for the presence of critical data elements essential to describing post-test ischemic risk. Few stress MPI reports provided a formal assessment of post-test risk within the impression section (3%) or the entire document (4%). In most cases, risk was determinable by combining critical data elements (74% impression, 98% whole). If ischemic risk was not determinable (25% impression, 2% whole), inadequate description of systolic function (9% impression, 1% whole) and inadequate description of ischemia (5% impression, 1% whole) were most commonly implicated. Post-test ischemic risk was determinable but rarely reported in this sample of stress MPI reports. This supports the potential use of NLP to help clarify risk. Further study of NLP in this context is needed.

Energy Dissipating Devices in Falling Rock Protection Barriers

NASA Astrophysics Data System (ADS)

Castanon-Jano, L.; Blanco-Fernandez, E.; Castro-Fresno, D.; Ballester-Muñoz, F.

2017-03-01

Rockfall is a phenomenon which, when uncontrolled, may cause extensive material damage and personal injury. One of the structures used to avoid accidents caused by debris flows or rockfalls is flexible barriers. The energy dissipating devices which absorb the energy generated by rock impact and reduce the mechanical stresses in the rest of the elements of the structure are an essential part of these kinds of structures. This document proposes an overview of the performance of energy dissipating devices, as well as of the role that they fulfil in the barrier. Furthermore, a compilation and a description of the dissipating elements found in the literature are proposed. Additionally, an analysis has been performed of the aspects taken into account in the design, such as experimental (quasi-static and dynamic) tests observing the variation of the behaviour curve depending on the test speed and numerical simulations by means of several finite element software packages.

SSME structural dynamic model development, phase 2

NASA Technical Reports Server (NTRS)

Foley, M. J.; Wilson, V. L.

1985-01-01

A set of test correlated mathematical models of the SSME High Pressure Oxygen Turbopump (HPOTP) housing and rotor assembly was produced. New analysis methods within the EISI/EAL and SPAR systems were investigated and runstreams for future use were developed. The LOX pump models have undergone extensive modification since the first phase of this effort was completed. The rotor assembly from the original model was abandoned and a new, more detailed model constructed. A description of the new rotor math model is presented. Also, the pump housing model was continually modified as additional test data have become available. This model is documented along with measured test results. Many of the more advanced features of the EAL/SPAR finite element analysis system were exercised. These included the cyclic symmetry option, the macro-element procedures, and the fluid analysis capability. In addition, a new tool was developed that allows an automated analysis of a disjoint structure in terms of its component modes. A complete description of the implementation of the Craig-Bampton method is given along with two worked examples.

Structural analysis of natural textures.

PubMed

Vilnrotter, F M; Nevatia, R; Price, K E

1986-01-01

Many textures can be described structurally, in terms of the individual textural elements and their spatial relationships. This paper describes a system to generate useful descriptions of natural textures in these terms. The basic approach is to determine an initial, partial description of the elements using edge features. This description controls the extraction of the texture elements. The elements are grouped by type, and spatial relationships between elements are computed. The descriptions are shown to be useful for recognition of the textures, and for reconstruction of periodic textures.

TerraFERMA: The Transparent Finite Element Rapid Model Assembler for multiphysics problems in Earth sciences

NASA Astrophysics Data System (ADS)

Wilson, Cian R.; Spiegelman, Marc; van Keken, Peter E.

2017-02-01

We introduce and describe a new software infrastructure TerraFERMA, the Transparent Finite Element Rapid Model Assembler, for the rapid and reproducible description and solution of coupled multiphysics problems. The design of TerraFERMA is driven by two computational needs in Earth sciences. The first is the need for increased flexibility in both problem description and solution strategies for coupled problems where small changes in model assumptions can lead to dramatic changes in physical behavior. The second is the need for software and models that are more transparent so that results can be verified, reproduced, and modified in a manner such that the best ideas in computation and Earth science can be more easily shared and reused. TerraFERMA leverages three advanced open-source libraries for scientific computation that provide high-level problem description (FEniCS), composable solvers for coupled multiphysics problems (PETSc), and an options handling system (SPuD) that allows the hierarchical management of all model options. TerraFERMA integrates these libraries into an interface that organizes the scientific and computational choices required in a model into a single options file from which a custom compiled application is generated and run. Because all models share the same infrastructure, models become more reusable and reproducible, while still permitting the individual researcher considerable latitude in model construction. TerraFERMA solves partial differential equations using the finite element method. It is particularly well suited for nonlinear problems with complex coupling between components. TerraFERMA is open-source and available at http://terraferma.github.io, which includes links to documentation and example input files.

Study for the optimization of a transport aircraft wing for maximum fuel efficiency. Volume 1: Methodology, criteria, aeroelastic model definition and results

NASA Technical Reports Server (NTRS)

Radovcich, N. A.; Dreim, D.; Okeefe, D. A.; Linner, L.; Pathak, S. K.; Reaser, J. S.; Richardson, D.; Sweers, J.; Conner, F.

1985-01-01

Work performed in the design of a transport aircraft wing for maximum fuel efficiency is documented with emphasis on design criteria, design methodology, and three design configurations. The design database includes complete finite element model description, sizing data, geometry data, loads data, and inertial data. A design process which satisfies the economics and practical aspects of a real design is illustrated. The cooperative study relationship between the contractor and NASA during the course of the contract is also discussed.

Xyce release and distribution management : version 1.2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchinson, Scott Alan; Williamson, Charles Michael

2003-10-01

This document presents a high-level description of the Xyce {trademark} Parallel Electronic Simulator Release and Distribution Management Process. The purpose of this process is to standardize the manner in which all Xyce software products progress toward release and how releases are made available to customers. Rigorous Release Management will assure that Xyce releases are created in such a way that the elements comprising the release are traceable and the release itself is reproducible. Distribution Management describes what is to be done with a Xyce release that is eligible for distribution.

C4ISR Architecture Working Group (AWG), Architecture Framework Version 2.0.

DTIC Science & Technology

1997-12-18

Vision Name Name/identifier of document that contains doctrine, goals, or vision Type Doctrine, goals, or vision Description Text summary description...e.g., organization, directive, order) Description Text summary of tasking •Rules, Criteria, or Conventions Name Name/identifier of document that...contains rules, criteria, or conventions Type One of: rules, criteria, or conventions Description Text summary description of contents or

Ultraviolet Free Electron Laser Facility preliminary design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Zvi, I.

1993-02-01

This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, butmore » have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).« less

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ermi, A.M.

1997-05-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

Space Station Program Description Document. Books 1-7

NASA Technical Reports Server (NTRS)

1984-01-01

The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.

Disability in Mexico: a comparative analysis between descriptive models and historical periods using a timeline.

PubMed

Sandoval, Hugo; Pérez-Neri, Iván; Martínez-Flores, Francisco; Valle-Cabrera, Martha Griselda Del; Pineda, Carlos

2017-01-01

Some interpretations frequently argue that three Disability Models (DM) (Charity, Medical/Rehabilitation, and Social) correspond to historical periods in terms of chronological succession. These views permeate a priori within major official documents on the subject in Mexico. This paper intends to test whether this association is plausible by applying a timeline method. A document search was made with inclusion and exclusion criteria in databases to select representative studies with which to depict milestones in the timelines for each period. The following is demonstrated: 1) models should be considered as categories of analysis and not as historical periods, in that the prevalence of elements of the three models is present to date, and 2) the association between disability models and historical periods results in teleological interpretations of the history of disability in Mexico.

Interpreting the ASTM 'content standard for digital geospatial metadata'

USGS Publications Warehouse

Nebert, Douglas D.

1996-01-01

ASTM and the Federal Geographic Data Committee have developed a content standard for spatial metadata to facilitate documentation, discovery, and retrieval of digital spatial data using vendor-independent terminology. Spatial metadata elements are identifiable quality and content characteristics of a data set that can be tied to a geographic location or area. Several Office of Management and Budget Circulars and initiatives have been issued that specify improved cataloguing of and accessibility to federal data holdings. An Executive Order further requires the use of the metadata content standard to document digital spatial data sets. Collection and reporting of spatial metadata for field investigations performed for the federal government is an anticipated requirement. This paper provides an overview of the draft spatial metadata content standard and a description of how the standard could be applied to investigations collecting spatially-referenced field data.

Idaho National Laboratory Emergency Readiness Assurance Plan - Fiscal Year 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, Carl J.

Department of Energy Order 151.1C, Comprehensive Emergency Management System requires that each Department of Energy field element documents readiness assurance activities, addressing emergency response planning and preparedness. Battelle Energy Alliance, LLC, as prime contractor at the Idaho National Laboratory (INL), has compiled this Emergency Readiness Assurance Plan to provide this assurance to the Department of Energy Idaho Operations Office. Stated emergency capabilities at the INL are sufficient to implement emergency plans. Summary tables augment descriptive paragraphs to provide easy access to data. Additionally, the plan furnishes budgeting, personnel, and planning forecasts for the next 5 years.

Rover nuclear rocket engine program: Overview of rover engine tests

NASA Technical Reports Server (NTRS)

Finseth, J. L.

1991-01-01

The results of nuclear rocket development activities from the inception of the ROVER program in 1955 through the termination of activities on January 5, 1973 are summarized. This report discusses the nuclear reactor test configurations (non cold flow) along with the nuclear furnace demonstrated during this time frame. Included in the report are brief descriptions of the propulsion systems, test objectives, accomplishments, technical issues, and relevant test results for the various reactor tests. Additionally, this document is specifically aimed at reporting performance data and their relationship to fuel element development with little or no emphasis on other (important) items.

Documents, Dialogue and the Emergence of Tertiary Orality

ERIC Educational Resources Information Center

Turner, Deborah; Allen, Warren

2013-01-01

Introduction: This investigation opens with a description of why studying non-traditional, oral documents can inform efforts to extend traditional library and information science practices, of description, storage, and retrieval, to artefacts made available through emerging media. Method: This study extends the method used to identify a document,…

Development a minimum data set of the information management system for burns.

PubMed

Ahmadi, Maryam; Alipour, Jahanpour; Mohammadi, Ali; Khorami, Farid

2015-08-01

Burns are the most common and destructive injuries in across of the world and especially in developing countries. Nevertheless, a standard tool for collecting the data of burn injury has not been developed yet. The purpose of this study was to develop a minimum data set (MDS) of the information management system for burns in Iran. This descriptive and cross-sectional study was performed in 2014. Data were collected from hospitals affiliated with Hormozgan and Iran University of Medical Sciences and medical documents centers, emergency centers and legal medicine centers located in Bandar Abbas city, in addition to internet access and library. Investigated documents were burn injury records in 2013, and documents that retrieved from the internet, and printed materials. Records were selected randomly based on T20-T29 categories from ICD-10. Data were collected using a checklist. In order to make a consensus about the data elements the decision Delphi technique was applied using a questionnaire. The content validity and reliability of questionnaire were assessed by expert's opinions and test-retest method, respectively. An MDS of burns was developed. This MDS divided into two categories: administrative and clinical with six and 17 section and 161 and 311 data elements respectively. This study showed that comprehensive and uniform data elements about burns do not exist in Iran. Therefore a MDS was developed for burns in Iran. Development of an MDS will result in standardization and effective management of the data through providing uniform and comprehensive data elements for burns. Thus, comparability of the extracted information from different analyses and researches will be possible in various levels. In addition, establishment of policies and prevention and control of burns will be possible, which results in the improvement of the quality of care and containment of costs. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

NASA standard: Trend analysis techniques

NASA Technical Reports Server (NTRS)

1988-01-01

This Standard presents descriptive and analytical techniques for NASA trend analysis applications. Trend analysis is applicable in all organizational elements of NASA connected with, or supporting, developmental/operational programs. Use of this Standard is not mandatory; however, it should be consulted for any data analysis activity requiring the identification or interpretation of trends. Trend Analysis is neither a precise term nor a circumscribed methodology, but rather connotes, generally, quantitative analysis of time-series data. For NASA activities, the appropriate and applicable techniques include descriptive and graphical statistics, and the fitting or modeling of data by linear, quadratic, and exponential models. Usually, but not always, the data is time-series in nature. Concepts such as autocorrelation and techniques such as Box-Jenkins time-series analysis would only rarely apply and are not included in this Standard. The document presents the basic ideas needed for qualitative and quantitative assessment of trends, together with relevant examples. A list of references provides additional sources of information.

VALIDATION OF ANALYTICAL METHODS AND INSTRUMENTATION FOR BERYLLIUM MEASUREMENT: REVIEW AND SUMMARY OF AVAILABLE GUIDES, PROCEDURES, AND PROTOCOLS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekechukwu, A

Method validation is the process of evaluating whether an analytical method is acceptable for its intended purpose. For pharmaceutical methods, guidelines from the United States Pharmacopeia (USP), International Conference on Harmonisation (ICH), and the United States Food and Drug Administration (USFDA) provide a framework for performing such valications. In general, methods for regulatory compliance must include studies on specificity, linearity, accuracy, precision, range, detection limit, quantitation limit, and robustness. Elements of these guidelines are readily adapted to the issue of validation for beryllium sampling and analysis. This document provides a listing of available sources which can be used to validatemore » analytical methods and/or instrumentation for beryllium determination. A literature review was conducted of available standard methods and publications used for method validation and/or quality control. A comprehensive listing of the articles, papers and books reviewed is given in the Appendix. Available validation documents and guides are listed therein; each has a brief description of application and use. In the referenced sources, there are varying approches to validation and varying descriptions of the valication process at different stages in method development. This discussion focuses on valication and verification of fully developed methods and instrumentation that have been offered up for use or approval by other laboratories or official consensus bodies such as ASTM International, the International Standards Organization (ISO) and the Association of Official Analytical Chemists (AOAC). This review was conducted as part of a collaborative effort to investigate and improve the state of validation for measuring beryllium in the workplace and the environment. Documents and publications from the United States and Europe are included. Unless otherwise specified, all referenced documents were published in English.« less

Open-source framework for documentation of scientific software written on MATLAB-compatible programming languages

NASA Astrophysics Data System (ADS)

Konnik, Mikhail V.; Welsh, James

2012-09-01

Numerical simulators for adaptive optics systems have become an essential tool for the research and development of the future advanced astronomical instruments. However, growing software code of the numerical simulator makes it difficult to continue to support the code itself. The problem of adequate documentation of the astronomical software for adaptive optics simulators may complicate the development since the documentation must contain up-to-date schemes and mathematical descriptions implemented in the software code. Although most modern programming environments like MATLAB or Octave have in-built documentation abilities, they are often insufficient for the description of a typical adaptive optics simulator code. This paper describes a general cross-platform framework for the documentation of scientific software using open-source tools such as LATEX, mercurial, Doxygen, and Perl. Using the Perl script that translates M-files MATLAB comments into C-like, one can use Doxygen to generate and update the documentation for the scientific source code. The documentation generated by this framework contains the current code description with mathematical formulas, images, and bibliographical references. A detailed description of the framework components is presented as well as the guidelines for the framework deployment. Examples of the code documentation for the scripts and functions of a MATLAB-based adaptive optics simulator are provided.

Waste receiving and processing plant control system; system design description

DOE Office of Scientific and Technical Information (OSTI.GOV)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less

DATAS Hardware Diagnostic Tests

DOT National Transportation Integrated Search

1990-10-01

This document is reference material for personnel using the Data Link and : Analysis System (DATAS) for hardware diagnostic testing. Included in this : document is a brief overall description of the DATAS, and a thorough : description of how to opera...

Translating infection control guidelines into practice: implementation process within a health care institution.

PubMed

Raveis, Victoria H; Conway, Laurie J; Uchida, Mayuko; Pogorzelska-Maziarz, Monika; Larson, Elaine L; Stone, Patricia W

2014-04-01

Health-care-associated infections (HAIs) remain a major patient safety problem even as policy and programmatic efforts designed to reduce HAIs have increased. Although information on implementing effective infection control (IC) efforts has steadily grown, knowledge gaps remain regarding the organizational elements that improve bedside practice and accommodate variations in clinical care settings. We conducted in-depth, semistructured interviews in 11 hospitals across the United States with a range of hospital personnel involved in IC (n = 116). We examined the collective nature of IC and the organizational elements that can enable disparate groups to work together to prevent HAIs. Our content analysis of participants' narratives yielded a rich description of the organizational process of implementing adherence to IC. Findings document the dynamic, fluid, interactional, and reactive nature of this process. Three themes emerged: implementing adherence efforts institution-wide, promoting an institutional culture to sustain adherence, and contending with opposition to the IC mandate.

Space station systems analysis study. Part 2, Volume 3: Appendixes, Book 1. Program requirements documentation

NASA Technical Reports Server (NTRS)

1977-01-01

The objective elements representative of the kinds of space activities that will be supported by the space construction base (SCB) are discussed in (1) a brief mission overview including the primary purpose and general objectives; (2) descriptions of the processes involved (where applicable), the mission hardware, the principal activities to be undertaken, the test requirements, and the principal tests; and (3) the SCB requirements including such items as special devices (e.g., fabrication modules, assembly or construction fixtures, cranes, and airlocks), power, data management and communications, waste management, environmental control, safety, and logistics. Each program option is then described in terms of the objective elements it supports, its orbit, the general makeup of the SCB, the transportation approach, and the program schedule goals. The specific requirements that are imposed on the SCB in order to support program option L are given.

Space shuttle configuration accounting functional design specification

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

Accuracy of outpatient service data for activity-based funding in New South Wales, Australia.

PubMed

Munyisia, Esther N; Reid, David; Yu, Ping

2017-05-01

Despite increasing research on activity-based funding (ABF), there is no empirical evidence on the accuracy of outpatient service data for payment. This study aimed to identify data entry errors affecting ABF in two drug and alcohol outpatient clinic services in Australia. An audit was carried out on healthcare workers' (doctors, nurses, psychologists, social workers, counsellors, and aboriginal health education officers) data entry errors in an outpatient electronic documentation system. Of the 6919 data entries in the electronic documentation system, 7.5% (518) had errors, 68.7% of the errors were related to a wrong primary activity, 14.5% were due to a wrong activity category, 14.5% were as a result of a wrong combination of primary activity and modality of care, 1.9% were due to inaccurate information on a client's presence during service delivery and 0.4% were related to a wrong modality of care. Data entry errors may affect the amount of funding received by a healthcare organisation, which in turn may affect the quality of treatment provided to clients due to the possibility of underfunding the organisation. To reduce errors or achieve an error-free environment, there is a need to improve the naming convention of data elements, their descriptions and alignment with the national standard classification of outpatient services. It is also important to support healthcare workers in their data entry by embedding safeguards in the electronic documentation system such as flags for inaccurate data elements.

Issues and solutions for storage, retrieval, and searching of MPEG-7 documents

NASA Astrophysics Data System (ADS)

Chang, Yuan-Chi; Lo, Ming-Ling; Smith, John R.

2000-10-01

The ongoing MPEG-7 standardization activity aims at creating a standard for describing multimedia content in order to facilitate the interpretation of the associated information content. Attempting to address a broad range of applications, MPEG-7 has defined a flexible framework consisting of Descriptors, Description Schemes, and Description Definition Language. Descriptors and Description Schemes describe features, structure and semantics of multimedia objects. They are written in the Description Definition Language (DDL). In the most recent revision, DDL applies XML (Extensible Markup Language) Schema with MPEG-7 extensions. DDL has constructs that support inclusion, inheritance, reference, enumeration, choice, sequence, and abstract type of Description Schemes and Descriptors. In order to enable multimedia systems to use MPEG-7, a number of important problems in storing, retrieving and searching MPEG-7 documents need to be solved. This paper reports on initial finding on issues and solutions of storing and accessing MPEG-7 documents. In particular, we discuss the benefits of using a virtual document management framework based on XML Access Server (XAS) in order to bridge the MPEG-7 multimedia applications and database systems. The need arises partly because MPEG-7 descriptions need customized storage schema, indexing and search engines. We also discuss issues arising in managing dependence and cross-description scheme search.

A new member of troglobitic Carychiidae, Koreozospeum nodongense gen. et sp. n. (Gastropoda, Eupulmonata, Ellobioidea) is described from Korea.

PubMed

Jochum, Adrienne; Prozorova, Larisa; Sharyi-Ool, Mariana; Páll-Gergely, Barna

2015-01-01

A new genus of troglobitic Carychiidae Jeffreys, 1830 is designated from Nodong Cave, North Chungcheong Province, Danyang, South Korea. This remarkable find represents a great range extension and thus, a highly distant distribution of troglobitic Carychiidae in Asia. The Zospeum-like, carychiid snails were recently included, without a formal description, in records documenting Korean malacofauna. The present paper describes Koreozospeum Jochum & Prozorova, gen. n. and illustrates the type species, Koreozospeum nodongense Lee, Prozorova & Jochum, sp. n. using novel Nano-CT images, including a video, internal shell morphology, SEM and SEM-EDX elemental compositional analysis of the shell.

Langley's CSI evolutionary model: Phase O

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Elliott, Kenny B.; Horta, Lucas G.; Bailey, Jim P.; Bruner, Anne M.; Sulla, Jeffrey L.; Won, John; Ugoletti, Roberto M.

1991-01-01

A testbed for the development of Controls Structures Interaction (CSI) technology to improve space science platform pointing is described. The evolutionary nature of the testbed will permit the study of global line-of-sight pointing in phases 0 and 1, whereas, multipayload pointing systems will be studied beginning with phase 2. The design, capabilities, and typical dynamic behavior of the phase 0 version of the CSI evolutionary model (CEM) is documented for investigator both internal and external to NASA. The model description includes line-of-sight pointing measurement, testbed structure, actuators, sensors, and real time computers, as well as finite element and state space models of major components.

GSFC Systems Test and Operation Language (STOL) functional requirements and language description

NASA Technical Reports Server (NTRS)

Desjardins, R.; Hall, G.; Mcguire, J.; Merwarth, P.; Mocarsky, W.; Truszkowski, W.; Villasenor, A.; Brosi, F.; Burch, P.; Carey, D.

1978-01-01

The Systems Tests and Operation Language (STOL) provides the means for user communication with payloads, applications programs, and other ground system elements. It is a systems operation language that enables an operator or user to communicate a command to a computer system. The system interprets each high level language directive from the user and performs the indicated action, such as executing a program, printing out a snapshot, or sending a payload command. This document presents the following: (1) required language features and implementation considerations; (2) basic capabilities; (3) telemetry, command, and input/output directives; (4) procedure definition and control; (5) listing, extension, and STOL nucleus capabilities.

AAOHN Competencies.

PubMed

2015-11-01

The AAOHN Competency document is one of the core documents that define occupational health nursing practice. This article provides a description of the process used to update the competencies, as well as a description of the new competencies. © 2015 The Author(s).

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC; Environmental Compliance Department Environment, Safety, and Health Division Y-12 National Security Complex

This document presents the Groundwater Protection Program (GWPP) management plan for the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12). The Y-12 GWPP functions as the primary point-of-contact for groundwater-related issues at Y-12, provides stewardship of the extensive network of groundwater monitoring wells at Y-12, and serves as a resource for technical expertise, support, and historical data for groundwater-related activities at Y-12. These organizational functions each serve the primary programmatic purpose of the GWPP, which is to ensure that groundwater monitoring activities within areas under Y-12 administrative control provide representative data in compliance with themore » multiple purposes of applicable state and federal regulations, DOE orders, and the corporate policies of BWXT Y-12, L.L.C. (hereafter referenced as BWXT), the Y-12 management and operations (M&O) contractor for DOE. This GWPP management plan addresses the requirements of DOE Order 450.1 (BWXT Y12 S/RID) regarding the implementation of a site-wide approach for groundwater protection at each DOE facility. Additionally, this plan is a ''living'' document that is reviewed annually, revised and reissued every three years, and is formatted to provide for updating individual sections independent of the rest of the document. Section 2 includes a short description of the groundwater system at Y-12, the history of groundwater monitoring at Y-12 and the corresponding evolution of the GWPP, and an overview of ongoing Y-12 groundwater monitoring activities. Section 3 describes the key elements of the GWPP management strategy. Organizational roles and responsibilities of GWPP personnel are outlined in Section 4. Section 5 presents an overview of the GWPP project plans for applicable programmatic elements. Section 6 lists the reports, plans, and documents that are referenced for technical and administrative details.« less

Semantic Metadata for Heterogeneous Spatial Planning Documents

NASA Astrophysics Data System (ADS)

Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

2016-09-01

Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3

EPA Science Inventory

This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...

ENDF/B summary documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinsey, R.

1979-07-01

This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containingmore » partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)« less

Evaluation of Semantic Web Technologies for Storing Computable Definitions of Electronic Health Records Phenotyping Algorithms.

PubMed

Papež, Václav; Denaxas, Spiros; Hemingway, Harry

2017-01-01

Electronic Health Records are electronic data generated during or as a byproduct of routine patient care. Structured, semi-structured and unstructured EHR offer researchers unprecedented phenotypic breadth and depth and have the potential to accelerate the development of precision medicine approaches at scale. A main EHR use-case is defining phenotyping algorithms that identify disease status, onset and severity. Phenotyping algorithms utilize diagnoses, prescriptions, laboratory tests, symptoms and other elements in order to identify patients with or without a specific trait. No common standardized, structured, computable format exists for storing phenotyping algorithms. The majority of algorithms are stored as human-readable descriptive text documents making their translation to code challenging due to their inherent complexity and hinders their sharing and re-use across the community. In this paper, we evaluate the two key Semantic Web Technologies, the Web Ontology Language and the Resource Description Framework, for enabling computable representations of EHR-driven phenotyping algorithms.

[Barriers and facilitators to health care coordination in two integrated health care organizations in Catalonia (Spain)].

PubMed

Vargas Lorenzo, Ingrid; Vázquez Navarrete, M Luisa

2007-01-01

To analyze 2 integrated delivery systems (IDS) in Catalonia and identify areas for future development to improve their effectiveness. An exploratory, descriptive, qualitative study was carried out based on case studies by means of document analysis and semi-structured individual interviews. A criterion sample of cases and, for each case, of documents and informants was selected. Study cases consisted of the Consorci Sanitari del Maresme (CSdM) and the Consorci Sanitari de Terrassa/Fundació Hospital Sant Llàtzer (FHSLL). A total of 127 documents were analyzed and 29 informants were interviewed: IDS managers (n = 10), technical staff (n = 5), operational unit managers (n = 5) and health professionals (n = 9). Content analysis was conducted, with mixed generation of categories and segmentation by cases and subjects. CSdM and CSdT/FHSLL are health care organizations with backward vertical integration, total services production, and real (CSdM) and virtual (CSdT/FHSLL) ownership. Funds are allocated by care level. The governing body is centralized in CSdM and decentralized in CSdT/FHSLL. In both organizations, the global objectives are oriented toward improving coordination and efficiency but are not in line with those of the operational units. Both organizations present a functional structure with integration of support functions and utilize mechanisms for collaboration between care levels based on work processes standardization. Both IDS present facilitators and barriers to health care coordination. To improve coordination, changes in external elements (payment mechanism) and in internal elements (governing body role, organizational structure and coordination mechanisms) are required.

ARISE antenna

NASA Astrophysics Data System (ADS)

Chmielewski, Arthur B.; Noca, Muriel; Ulvestad, James

2000-03-01

Supermassive black holes are among the most spectacular objects in the Universe, and are laboratories for physics in extreme conditions. Understanding the physics of massive black holes and related phenomena is a primary goal of the ARISE mission. The scientific goals of the mission are described in detail on the ARISE web site http://arise.ipl.nasa.gov and in the ARISE Science Goals document. The following paper, as the title suggests, is not intended to be a comprehensive description of ARISE, but deals only with one aspect of the ARISE mission-the inflatable antenna which is the key element of the ARISE spacecraft. This spacecraft,due to the extensive reliance on inflatables, may be considered as the first generation Gossamer spacecraft

Core competencies for scientific editors of biomedical journals: consensus statement.

PubMed

Moher, David; Galipeau, James; Alam, Sabina; Barbour, Virginia; Bartolomeos, Kidist; Baskin, Patricia; Bell-Syer, Sally; Cobey, Kelly D; Chan, Leighton; Clark, Jocalyn; Deeks, Jonathan; Flanagin, Annette; Garner, Paul; Glenny, Anne-Marie; Groves, Trish; Gurusamy, Kurinchi; Habibzadeh, Farrokh; Jewell-Thomas, Stefanie; Kelsall, Diane; Lapeña, José Florencio; MacLehose, Harriet; Marusic, Ana; McKenzie, Joanne E; Shah, Jay; Shamseer, Larissa; Straus, Sharon; Tugwell, Peter; Wager, Elizabeth; Winker, Margaret; Zhaori, Getu

2017-09-11

Scientific editors are responsible for deciding which articles to publish in their journals. However, we have not found documentation of their required knowledge, skills, and characteristics, or the existence of any formal core competencies for this role. We describe the development of a minimum set of core competencies for scientific editors of biomedical journals. The 14 key core competencies are divided into three major areas, and each competency has a list of associated elements or descriptions of more specific knowledge, skills, and characteristics that contribute to its fulfillment. We believe that these core competencies are a baseline of the knowledge, skills, and characteristics needed to perform competently the duties of a scientific editor at a biomedical journal.

Reese Sorenson's Individual Professional Page

NASA Technical Reports Server (NTRS)

Sorenson, Reese; Nixon, David (Technical Monitor)

1998-01-01

The subject document is a World Wide Web (WWW) page entitled, "Reese Sorenson's Individual Professional Page." Its can be accessed at "http://george.arc.nasa.gov/sorenson/personal/index.html". The purpose of this page is to make the reader aware of me, who I am, and what I do. It lists my work assignments, my computer experience, my place in the NASA hierarchy, publications by me, awards received by me, my education, and how to contact me. Writing this page was a learning experience, pursuant to an element in my Job Description which calls for me to be able to use the latest computers. This web page contains very little technical information, none of which is classified or sensitive.

Job Analysis and the Preparation of Job Descriptions. Mendip Papers MP 037.

ERIC Educational Resources Information Center

Saunders, Bob

This document provides guidelines for conducting job analyses and writing job descriptions. It covers the following topics: the rationale for job descriptions, the terminology of job descriptions, who should write job descriptions, getting the information to write job descriptions, preparing for staff interviews, conducting interviews, writing the…

Chapter 4: Variant descriptions

Treesearch

Duncan C. Lutes; Donald C. E. Robinson

2003-01-01

The Fire and Fuels Extension (FFE) to the Forest Vegetation Simulator (FVS) simulates fuel dynamics and potential fire behavior over time, in the context of stand development and management. This report documents differences between geographic variants of the FFE. It is a companion document to the FFE "Model Description" and "User's Guide."...

Nurses' reported thinking during medication administration.

PubMed

Eisenhauer, Laurel A; Hurley, Ann C; Dolan, Nancy

2007-01-01

To document nurses' reported thinking processes during medication administration before and after implementation of point-of-care technology. Semistructured interviews and real-time tape recordings were used to document the thinking processes of 40 nurses practicing in inpatient care units in a large tertiary care teaching hospital in the northeastern US. Content analysis resulted in identification of 10 descriptive categories of nurses' thinking: communication, dose-time, checking, assessment, evaluation, teaching, side effects, work arounds, anticipating problem solving, and drug administration. Situations requiring judgment in dosage, timing, or selection of specific medications (e.g., pain management, titration of antihypertensives) provided the most explicit data about nurses' use of critical thinking and clinical judgment. A key element was nurses' constant professional vigilance to ensure that patients received their appropriate medications. Nurses' thinking processes extended beyond rules and procedures and were based on patient data and interdisciplinary professional knowledge to provide safe and effective care. Identification of thinking processes can help nurses to explain the professional expertise inherent in medication administration beyond the technical application of the "5 rights."

Initial Investigation of Operational Concept Elements for NASA's NextGen-Airportal Project Research

NASA Technical Reports Server (NTRS)

Lohr, Gary; Lee, Jonathan; Poage, James L.; Tobias, Leonard

2009-01-01

The NextGen-Airportal Project is organized into three research focus areas: Safe and Efficient Surface Operations, Coordinated Arrival/Departure Operations Management, and Airportal Transition and Integration Management. The content in this document was derived from an examination of constraints and problems at airports for accommodating future increases in air traffic, and from an examination of capabilities envisioned for NextGen. The concepts are organized around categories of constraints and problems and therefore do not precisely match, but generally reflect, the research focus areas. The concepts provide a framework for defining and coordinating research activities that are, and will be, conducted by the NextGen-Airportal Project. The concepts will help the research activities function as an integrated set focused on future needs for airport operations and will aid aligning the research activities with NextGen key capabilities. The concepts are presented as concept elements with more detailed sub-elements under each concept element. For each concept element, the following topics are discussed: constraints and problems being addressed, benefit descriptions, required technology and infrastructure, and an initial list of potential research topics. Concept content will be updated and more detail added as the research progresses. The concepts are focused on enhancing airportal capacity and efficiency in a timeframe 20 to 25 years in the future, which is similar to NextGen's timeframe.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 6: Lunar systems

NASA Technical Reports Server (NTRS)

1991-01-01

NASA's two Office of Space Flight (Code M) Space Transfer Vehicle (STV) contractors supported development of Space Exploration Initiative (SEI) lunar transportation concepts. This work treated lunar SEI missions as the far end of a more near-term STV program, most of whose missions were satellite delivery and servicing requirements derived from Civil Needs Data Base (CNDB) projections. Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) began to address the complete design of a lunar transportation system. The following challenges were addressed: (1) the geometry of aerobraking; (2) accommodation of mixed payloads; (3) cryogenic propellant transfer in Low Lunar Orbit (LLO); (4) fully re-usable design; and (5) growth capability. The leveled requirements, derived requirements, and assumptions applied to the lunar transportation system design are discussed. The mission operations section includes data on mission analysis studies and performance parametrics as well as the operating modes and performance evaluations which include the STCAEM recommendations. Element descriptions for the lunar transportation family included are a listing of the lunar transfer vehicle/lunar excursion vehicle (LTV/LEV) components; trade studies and mass analyses of the transfer and excursion modules; advanced crew recovery vehicle (ACRV) (modified crew recovery vehicle (MCRV)) modifications required to fulfill lunar operations; the aerobrake shape and L/D to be used; and some costing methods and results. Commonality and evolution issues are also discussed.

PFLOTRAN Verification: Development of a Testing Suite to Ensure Software Quality

NASA Astrophysics Data System (ADS)

Hammond, G. E.; Frederick, J. M.

2016-12-01

In scientific computing, code verification ensures the reliability and numerical accuracy of a model simulation by comparing the simulation results to experimental data or known analytical solutions. The model is typically defined by a set of partial differential equations with initial and boundary conditions, and verification ensures whether the mathematical model is solved correctly by the software. Code verification is especially important if the software is used to model high-consequence systems which cannot be physically tested in a fully representative environment [Oberkampf and Trucano (2007)]. Justified confidence in a particular computational tool requires clarity in the exercised physics and transparency in its verification process with proper documentation. We present a quality assurance (QA) testing suite developed by Sandia National Laboratories that performs code verification for PFLOTRAN, an open source, massively-parallel subsurface simulator. PFLOTRAN solves systems of generally nonlinear partial differential equations describing multiphase, multicomponent and multiscale reactive flow and transport processes in porous media. PFLOTRAN's QA test suite compares the numerical solutions of benchmark problems in heat and mass transport against known, closed-form, analytical solutions, including documentation of the exercised physical process models implemented in each PFLOTRAN benchmark simulation. The QA test suite development strives to follow the recommendations given by Oberkampf and Trucano (2007), which describes four essential elements in high-quality verification benchmark construction: (1) conceptual description, (2) mathematical description, (3) accuracy assessment, and (4) additional documentation and user information. Several QA tests within the suite will be presented, including details of the benchmark problems and their closed-form analytical solutions, implementation of benchmark problems in PFLOTRAN simulations, and the criteria used to assess PFLOTRAN's performance in the code verification procedure. References Oberkampf, W. L., and T. G. Trucano (2007), Verification and Validation Benchmarks, SAND2007-0853, 67 pgs., Sandia National Laboratories, Albuquerque, NM.

Format( )MEDIC( )Input

NASA Astrophysics Data System (ADS)

Foster, K.

1994-09-01

This document is a description of a computer program called Format( )MEDIC( )Input. The purpose of this program is to allow the user to quickly reformat wind velocity data in the Model Evaluation Database (MEDb) into a reasonable 'first cut' set of MEDIC input files (MEDIC.nml, StnLoc.Met, and Observ.Met). The user is cautioned that these resulting input files must be reviewed for correctness and completeness. This program will not format MEDb data into a Problem Station Library or Problem Metdata File. A description of how the program reformats the data is provided, along with a description of the required and optional user input and a description of the resulting output files. A description of the MEDb is not provided here but can be found in the RAS Division Model Evaluation Database Description document.

A job analysis design for the rail industry : description and model analysis of the job of freight conductor.

DOT National Transportation Integrated Search

2013-10-01

This document provides a step-by-step description of the design and execution of a strategic job analysis, using the position of Freight Conductor as an example. This document was created to be useful for many different needs, and can be used as an e...

29 CFR 2520.102-3 - Contents of summary plan description.

Code of Federal Regulations, 2010 CFR

2010-07-01

... document that accompanies the plan's SPD, provided that the document satisfies the style and format... descriptive provisions in addition to those prescribed in paragraph (t)(2) of this section. However, the style... Office of Management and Budget under control number 1210-0039) [42 FR 37180, July 19, 1977, as amended...

Gaia DR2 documentation Chapter 6: Spectroscopy

NASA Astrophysics Data System (ADS)

Sartoretti, P.; Blomme, R.; David, M.; Seabroke, G.

2018-04-01

This chapter of the Gaia DR2 documentation describes the processing and validation of the Radial Velocity Spectrometer (RVS) data. A more detailed description of the processing is provided in Sartoretti et al. (2018) and of the validation in Katz et al. (2018). A description of the RVS instrument is provided in Cropper et al. (2018).

Receivers

NASA Technical Reports Server (NTRS)

Donnelly, H.

1983-01-01

Before discussing Deep Space Network receivers, a brief description of the functions of receivers and how they interface with other elements of the Network is presented. Different types of receivers are used in the Network for various purposes. The principal receiver type is used for telemetry and tracking. This receiver provides the capability, with other elements of the Network, to track the space probe utilizing Doppler and range measurements, and to receive telemetry, including both scientific data from the onboard experiments and engineering data pertaining to the health of the probe. Another type of receiver is used for radio science applications. This receiver measures phase perturbations on the carrier signal to obtain information on the composition of solar and planetary atmospheres and interplanetary space. A third type of receiver utilizes very long baseline interferometry (VLBI) techniques for both radio science and spacecraft navigation data. Only the telemetry receiver is described in detail in this document. The integration of the Receiver-Exciter subsystem with other portions of the Deep Space Network is described.

Prototype Mixed Finite Element Hydrodynamics Capability in ARES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rieben, R N

This document describes work on a prototype Mixed Finite Element Method (MFEM) hydrodynamics algorithm in the ARES code, and its application to a set of standard test problems. This work is motivated by the need for improvements to the algorithms used in the Lagrange hydrodynamics step to make them more robust. We begin by identifying the outstanding issues with traditional numerical hydrodynamics algorithms followed by a description of the proposed method and how it may address several of these longstanding issues. We give a theoretical overview of the proposed MFEM algorithm as well as a summary of the coding additionsmore » and modifications that were made to add this capability to the ARES code. We present results obtained with the new method on a set of canonical hydrodynamics test problems and demonstrate significant improvement in comparison to results obtained with traditional methods. We conclude with a summary of the issues still at hand and motivate the need for continued research to develop the proposed method into maturity.« less

Baseline Description and Analysis of the Operations Related to Warehouse Controlled Documents at the Navy Publications and Forms Center, Philadelphia, Pennsylvania. Volume I. Phase I.

DTIC Science & Technology

1980-03-06

performing the present NPFC tasks. Potential automation technologies may include order processing mechanization, demand printing from micrographic or...effort and documented in this volume included the following: a. Functional description of the order processing activities as they currently operate. b...covered under each analysis area. i It is obvious from the exhibit that the functional description of order processing operations was to include COG I

System Design Description for the TMAD Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finfrock, S.H.

This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System.

AIDPRF/PRFAID user's manual

NASA Technical Reports Server (NTRS)

Buck, C. H.

1975-01-01

The program documentation for the PRF ARTWORK/AIDS conversion program, which serves as the interface between the outputs of the PRF ARTWORK and AIDS programs, was presented. The document has a two-fold purpose, the first of which is a description of the software design including flowcharts of the design at the functional level. The second purpose is to provide the user with a detailed description of the input parameters and formats necessary to execute the program and a description of the output produced when the program is executed.

Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

NASA Technical Reports Server (NTRS)

Genuardi, Michael T.

1993-01-01

One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

Putting Practice into Words: The State of Data and Methods Transparency in Grammatical Descriptions

ERIC Educational Resources Information Center

Gawne, Lauren; Kelly, Barbara F.; Berez-Kroeker, Andrea L.; Heston, Tyler

2017-01-01

Language documentation and description are closely related practices, often performed as part of the same fieldwork project on an un(der)-studied language. Research trends in recent decades have seen a great volume of publishing in regards to the methods of language documentation, however, it is not clear that linguists' awareness of the…

In-Trail Procedure (ITP) Algorithm Design

NASA Technical Reports Server (NTRS)

Munoz, Cesar A.; Siminiceanu, Radu I.

2007-01-01

The primary objective of this document is to provide a detailed description of the In-Trail Procedure (ITP) algorithm, which is part of the Airborne Traffic Situational Awareness In-Trail Procedure (ATSA-ITP) application. To this end, the document presents a high level description of the ITP Algorithm and a prototype implementation of this algorithm in the programming language C.

Functional Description of Air Traffic Control

DOT National Transportation Integrated Search

1971-04-01

The document contains a description of air traffic control in terms of generic operational functions. The functions are grouped by flight phase and by major system function (navigation, surveillance, control and communication). More detailed descript...

Exchanging the Context between OGC Geospatial Web clients and GIS applications using Atom

NASA Astrophysics Data System (ADS)

Maso, Joan; Díaz, Paula; Riverola, Anna; Pons, Xavier

2013-04-01

Currently, the discovery and sharing of geospatial information over the web still presents difficulties. News distribution through website content was simplified by the use of Really Simple Syndication (RSS) and Atom syndication formats. This communication exposes an extension of Atom to redistribute references to geospatial information in a Spatial Data Infrastructure distributed environment. A geospatial client can save the status of an application that involves several OGC services of different kind and direct data and share this status with other users that need the same information and use different client vendor products in an interoperable way. The extensibility of the Atom format was essential to define a format that could be used in RSS enabled web browser, Mass Market map viewers and emerging geospatial enable integrated clients that support Open Geospatial Consortium (OGC) services. Since OWS Context has been designed as an Atom extension, it is possible to see the document in common places where Atom documents are valid. Internet web browsers are able to present the document as a list of items with title, abstract, time, description and downloading features. OWS Context uses GeoRSS so that, the document can be to be interpreted by both Google maps and Bing Maps as items that have the extent represented in a dynamic map. Another way to explode a OWS Context is to develop an XSLT to transform the Atom feed into an HTML5 document that shows the exact status of the client view window that saved the context document. To accomplish so, we use the width and height of the client window, and the extent of the view in world (geographic) coordinates in order to calculate the scale of the map. Then, we can mix elements in world coordinates (such as CF-NetCDF files or GML) with elements in pixel coordinates (such as WMS maps, WMTS tiles and direct SVG content). A smarter map browser application called MiraMon Map Browser is able to write a context document and read it again to recover the context of the previous view or load a context generated by another application. The possibility to store direct links to direct files in OWS Context is particularly interesting for GIS desktop solutions. This communication also presents the development made in the MiraMon desktop GIS solution to include OWS Context. MiraMon software is able to deal either with local files, web services and database connections. As in any other GIS solution, MiraMon team designed its own file (MiraMon Map MMM) for storing and sharing the status of a GIS session. The new OWS Context format is now adopted as an interoperable substitution of the MMM. The extensibility of the format makes it possible to map concepts in the MMM to current OWS Context elements (such as titles, data links, extent, etc) and to generate new elements that are able to include all extra metadata not currently covered by OWS Context. These developments were done in the nine edition of the OpenGIS Web Services Interoperability Experiment (OWS-9) and are demonstrated in this communication.

Flight Experiment Demonstration System (FEDS) functional description and interface document

NASA Technical Reports Server (NTRS)

Belcher, R. C.; Shank, D. E.

1984-01-01

This document presents a functional description of the Flight Experiment Demonstration System (FEDS) and of interfaces between FEDS and external hardware and software. FEDS is a modification of the Automated Orbit Determination System (AODS). FEDS has been developed to support a ground demonstration of microprocessor-based onboard orbit determination. This document provides an overview of the structure and logic of FEDS and details the various operational procedures to build and execute FEDS. It also documents a microprocessor interface between FEDS and a TDRSS user transponder and describes a software simulator of the interface used in the development and system testing of FEDS.

Medical emergencies on board commercial airlines: is documentation as expected?

PubMed Central

2012-01-01

Introduction The purpose of this study was to perform a descriptive, content-based analysis on the different forms of documentation for in-flight medical emergencies that are currently provided in the emergency medical kits on board commercial airlines. Methods Passenger airlines in the World Airline Directory were contacted between March and May 2011. For each participating airline, sample in-flight medical emergency documentation forms were obtained. All items in the sample documentation forms were subjected to a descriptive analysis and compared to a sample "medical incident report" form published by the International Air Transport Association (IATA). Results A total of 1,318 airlines were contacted. Ten airlines agreed to participate in the study and provided a copy of their documentation forms. A descriptive analysis revealed a total of 199 different items, which were summarized into five sub-categories: non-medical data (63), signs and symptoms (68), diagnosis (26), treatment (22) and outcome (20). Conclusions The data in this study illustrate a large variation in the documentation of in-flight medical emergencies by different airlines. A higher degree of standardization is preferable to increase the data quality in epidemiologic aeromedical research in the future. PMID:22397530

Deep space network support of the manned space flight network for Apollo, volume 3. [support for Apollo 14, 15, 16, and 17 flights

NASA Technical Reports Server (NTRS)

Hartley, R. B.

1974-01-01

The Deep Space Network (DSN) activities in support of Project Apollo during the period of 1971 and 1972 are reported. Beginning with the Apollo 14 mission and concluding with the Apollo 17 mission, the narrative includes, (1) a mission description, (2) the NASA support requirements placed on the DSN, and, (3) a comprehensive account of the support activities provided by each committed DSN deep space communication station. Associated equipment and activities of the three elements of the DSN (the Deep Space Instrumentation Facility (DSIF), the Space Flight Operations Facility (SFOF), and the Ground Communications Facility (GCF)) used in meeting the radio-metric and telemetry demands of the missions are documented.

Clinician researcher career pathway for registered nurses and midwives: A proposal.

PubMed

Smith, Sheree; Gullick, Janice; Ballard, Jacqueline; Perry, Lin

2018-06-01

To consider clinician researcher career frameworks and propose a new pathway, integrating university and health service components to support research career progression within nursing and midwifery practice. Hospitals with research-active clinicians report fewer adverse events and better patient outcomes. Nursing clinician researcher career development is therefore an international priority, yet positions and expectations associated with this are not always well articulated, with nurses and midwives challenged to accommodate research and clinical careers. This discussion paper describes nurse/midwife clinician researcher career frameworks and a new pathway that aligns academic and nursing role descriptions. The new framework was informed by a brief literature search for international framework documents, three Australian state-based Nurses and Midwives Awards: the Australian Qualifications Framework, publically available University Academic (Research) Award schedules and academic staff descriptions, and state health department and health services publications. The implementation of research-based practice is a key element of nursing and midwifery roles and "advanced practice" position descriptions have well-defined research expectations. This paper considers structures to support their achievement. This paper provides a blueprint for clinician researcher career development. It elevates the research domain as an equal alongside clinical, managerial and educational clinical career development. © 2018 John Wiley & Sons Australia, Ltd.

7 CFR 1753.58 - Closeout documents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

7 CFR 1753.58 - Closeout documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

7 CFR 1753.58 - Closeout documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

7 CFR 1753.58 - Closeout documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

7 CFR 1753.58 - Closeout documents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

Choguita Rarámuri (Tarahumara) Language Description and Documentation: A Guide to the Deposited Collection and Associated Materials

ERIC Educational Resources Information Center

Caballero, Gabriela

2017-01-01

Choguita Rarámuri (Tarahumara) is a Uto-Aztecan language spoken in Northern Mexico of great typological, theoretical, and historical significance. This paper presents an overview and background of the Choguita Rarámuri language description and documentation project and provides a guide to the documentary collection emerging from this project. This…

International Space Station Science Information for Public Release on the NASA Web Portal

NASA Technical Reports Server (NTRS)

Robinson, Julie A.; Tate, Judy M.

2009-01-01

This document contains some of the descriptions of payload and experiment related to life support and habitation. These describe experiments that have or are scheduled to fly on the International Space Station. There are instructions, and descriptions of the fields that make up the database. The document is arranged in alphabetical order by the Payload

Guidelines for Documentation of Computer Programs and Automated Data Systems. (Category: Software; Subcategory: Documentation).

ERIC Educational Resources Information Center

Federal Information Processing Standards Publication, 1976

1976-01-01

These guidelines provide a basis for determining the content and extent of documentation for computer programs and automated data systems. Content descriptions of ten document types plus examples of how management can determine when to use the various types are included. The documents described are (1) functional requirements documents, (2) data…

A rapid review of treatment literacy materials for tuberculosis patients.

PubMed

Brumwell, A; Noyes, E; Kulkarni, S; Lin, V; Becerra, M C; Yuen, C M

2018-03-01

To assess available treatment literacy materials for patients undergoing treatment for tuberculosis (TB). We conducted a rapid review by searching the US Centers for Disease Control's Find TB Resources website and the websites of health departments and TB-focused organizations. We included English-language documents intended to educate TB patients about anti-tuberculosis treatment. We evaluated the format, readability, and content of documents, and audience. We defined 12 essential content elements based on those previously identified as facilitating human immunodeficiency virus treatment literacy. Of the 205 documents obtained, 45 were included in our review. The median reading grade level was 7 (IQR 5-8). The median number of essential content elements present was 6 (IQR 4-8), with the most comprehensive document containing 11 of the 12 elements. Only two documents were written for children with TB or their care givers, and two for patients with drug-resistant TB. Many documents contained paternalistic and non-patient-centered language. We found few examples of comprehensive, patient-centered documents. Work is needed to achieve consensus as to the essential elements of TB treatment literacy and to create additional materials for children, patients with drug-resistant TB, and those with lower literacy levels.

Differences in reporting of analyses in internal company documents versus published trial reports: comparisons in industry-sponsored trials in off-label uses of gabapentin.

PubMed

Vedula, S Swaroop; Li, Tianjing; Dickersin, Kay

2013-01-01

Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded.

A protocol for better design, application, and communication of population viability analyses.

PubMed

Pe'er, Guy; Matsinos, Yiannis G; Johst, Karin; Franz, Kamila W; Turlure, Camille; Radchuk, Viktoriia; Malinowska, Agnieszka H; Curtis, Janelle M R; Naujokaitis-Lewis, Ilona; Wintle, Brendan A; Henle, Klaus

2013-08-01

Population viability analyses (PVAs) contribute to conservation theory, policy, and management. Most PVAs focus on single species within a given landscape and address a specific problem. This specificity often is reflected in the organization of published PVA descriptions. Many lack structure, making them difficult to understand, assess, repeat, or use for drawing generalizations across PVA studies. In an assessment comparing published PVAs and existing guidelines, we found that model selection was rarely justified; important parameters remained neglected or their implementation was described vaguely; limited details were given on parameter ranges, sensitivity analysis, and scenarios; and results were often reported too inconsistently to enable repeatability and comparability. Although many guidelines exist on how to design and implement reliable PVAs and standards exist for documenting and communicating ecological models in general, there is a lack of organized guidelines for designing, applying, and communicating PVAs that account for their diversity of structures and contents. To fill this gap, we integrated published guidelines and recommendations for PVA design and application, protocols for documenting ecological models in general and individual-based models in particular, and our collective experience in developing, applying, and reviewing PVAs. We devised a comprehensive protocol for the design, application, and communication of PVAs (DAC-PVA), which has 3 primary elements. The first defines what a useful PVA is; the second element provides a workflow for the design and application of a useful PVA and highlights important aspects that need to be considered during these processes; and the third element focuses on communication of PVAs to ensure clarity, comprehensiveness, repeatability, and comparability. Thereby, DAC-PVA should strengthen the credibility and relevance of PVAs for policy and management, and improve the capacity to generalize PVA findings across studies. © 2013 Society for Conservation Biology.

Corrective Action Decision Document/Closure Report for Corrective Action Unit 571: Area 9 Yucca Flat Plutonium Dispersion Sites, Nevada National Security Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, Patrick

2014-08-01

The purpose of this CADD/CR is to provide documentation and justification that no further corrective action is needed for the closure of CAU 571 based on the implementation of corrective actions. This includes a description of investigation activities, an evaluation of the data, and a description of corrective actions that were performed. The CAIP provides information relating to the scope and planning of the investigation. Therefore, that information will not be repeated in this document.

[Interrelationship among "NANDA, NOC and NIC". A pilot study and an evaluation of a nursing document].

PubMed

Gomez de Segura Navarro, Carlota; Esain Larrambe, Ainhoa; Tina Majuelo, Pilar; Guembe Ibáñez, Irene; Fernández Perea, Laura; Narvaiza Solís, M Jesús

2006-01-01

(a) to determine the effectiveness of a nursing document which integrates nursing diagnoses, nursing treatments/actions (NIC), and results (NOC); (b) to verify the application of the aforementioned document in a hospitalization unit. A descriptive, transversal and observational study. Nursing documents (NANDA, NIC and NOC taxonomies). PHASES: 1st: analysis of the content in the nursing documentation for 23 pneumonic patients: Selection of nursing diagnoses and the most frequent interdependent problems. 2nd: Selection of results and nursing treatment/actions. 3rd: Elaboration of the document and a description of the Likert scales to define the state of the indicators for each result. 4th: A pilot study of the document applied to 12 patients. the application of the document permits one to identify the real status of a patient; to establish specific objectives; to improve the recording of data; to observe the effectiveness of treatment; to include educational activities; to give greater continuity and quality to a treatment plan.

Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

ERIC Educational Resources Information Center

Girill, T. R.

1991-01-01

This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

Traveler information services in rural tourism areas : appendix A, tourist intercept surveys

DOT National Transportation Integrated Search

2000-06-30

This document presents documentation regarding tourist intercept surveys for traveler information services in rural areas. It documents data collection functions and information dissemination functions, and provides an interpretive description of tra...

Medieval descriptions and doctrines of stroke: preliminary analysis of select sources. Part II: between Galenism and Aristotelism - Islamic theories of apoplexy (800-1200).

PubMed

Karenberg, A; Hort, I

1998-12-01

This second paper on medieval descriptions and doctrines of stroke reviews concepts outlined by famous Muslim physicians of the Middle Ages such as Rhazes, Haly Abbas, Avicenna, and Averroes. Contrary to a popular belief, Islamic neurological texts represent not only a bridge between ancient and western medieval medical knowledge, but also document remarkable advancements. Whereas statements on diagnosis and prognosis lack originality, the endeavors of physician-philosophers and medical authors led to substantial additions and important changes in theory. Such modifications include the integration of ventricular doctrine and particularly the attempt to unify Aristotelian and Galenic tenets which resulted in a complex discussion about the seats and causes of apoplexy. The fairly simple model handed down by Galenists of the Byzantine period was replaced by more detailed classifications, which proposed "cerebral" as well as "vascular" origins of the disease without suggesting a "cerebrovascular" etiology. Islamic therapeutic strategies included dietetic, pharmacological and surgical elements. The use of the cautery in "chronic apoplexy" was a special feature of Arabic surgery.

Groundwater Protection Program Management Plan For The U.S. Department Of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental, LLC

2009-09-01

This document presents the Groundwater Protection Program (GWPP) management plan for the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12). The Y-12 GWPP functions as the primary point-of-contact for groundwater-related issues at Y-12, provides stewardship of the extensive network of groundwater monitoring wells at Y-12, and serves as a resource for technical expertise, support, and historical data for groundwater-related activities at Y-12. These organizational functions each serve the primary programmatic purpose of the GWPP, which is to ensure that groundwater monitoring activities within areas under Y-12 administrative control provide representative data in compliance with themore » multiple purposes of applicable state and federal regulations, DOE orders, and the corporate policies of Babcock & Wilcox Technical Services Y-12 LLC (hereafter referenced as B&W Y-12), the Y-12 management and operations (M&O) contractor for DOE. B&W Y-12 is a new corporate name, assumed in January 2007, for the company formerly known as BWXT Y-12, L.L.C., hereafter referenced as BWXT. This GWPP management plan addresses the requirements of DOE Order 450.1A Environmental Protection Program (hereafter referenced as DOE O 450.1A), which emphasize a site-wide approach for groundwater protection at each DOE facility through implementation of groundwater surveillance monitoring. Additionally, this plan addresses the relevant and applicable GWPP elements and goals described in the DOE O 450.1A technical guidance documents issued in June 2004 (DOE 2004) and May 2005 (DOE 2005). This GWPP management plan is a 'living' document that is reviewed annually, revised and reissued every three years, and is formatted to provide for updating individual sections independent of the rest of the document. Section 2 includes a short description of the groundwater system at Y-12, the history of groundwater monitoring at Y-12 and the corresponding evolution of the GWPP, and an overview of ongoing Y-12 groundwater monitoring activities. Section 3 describes the key elements of the GWPP management strategy. Organizational roles and responsibilities of GWPP personnel are outlined in Section 4. Section 5 presents an overview of the GWPP project plans for applicable programmatic elements. Section 6 lists the reports, plans, and documents that are referenced for technical and administrative details.« less

Assessment of text documentation accompanying uncoded diagnoses in computerized health insurance claims in Japan.

PubMed

Tanihara, Shinichi

2015-01-01

Uncoded diagnoses in health insurance claims (HICs) may introduce bias into Japanese health statistics dependent on computerized HICs. This study's aim was to identify the causes and characteristics of uncoded diagnoses. Uncoded diagnoses from computerized HICs (outpatient, inpatient, and the diagnosis procedure-combination per-diem payment system [DPC/PDPS]) submitted to the National Health Insurance Organization of Kumamoto Prefecture in May 2010 were analyzed. The text documentation accompanying the uncoded diagnoses was used to classify diagnoses in accordance with the International Classification of Diseases-10 (ICD-10). The text documentation was also classified into four categories using the standard descriptions of diagnoses defined in the master files of the computerized HIC system: 1) standard descriptions of diagnoses, 2) standard descriptions with a modifier, 3) non-standard descriptions of diagnoses, and 4) unclassifiable text documentation. Using these classifications, the proportions of uncoded diagnoses by ICD-10 disease category were calculated. Of the uncoded diagnoses analyzed (n = 363 753), non-standard descriptions of diagnoses for outpatient, inpatient, and DPC/PDPS HICs comprised 12.1%, 14.6%, and 1.0% of uncoded diagnoses, respectively. The proportion of uncoded diagnoses with standard descriptions with a modifier for Diseases of the eye and adnexa was significantly higher than the overall proportion of uncoded diagnoses among every HIC type. The pattern of uncoded diagnoses differed by HIC type and disease category. Evaluating the proportion of uncoded diagnoses in all medical facilities and developing effective coding methods for diagnoses with modifiers, prefixes, and suffixes should reduce number of uncoded diagnoses in computerized HICs and improve the quality of HIC databases.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This large document provides a catalog of the location of large numbers of reports pertaining to the charge of the Presidential Advisory Committee on Human Radiation Research and is arranged as a series of appendices. Titles of the appendices are Appendix A- Records at the Washington National Records Center Reviewed in Whole or Part by DoD Personnel or Advisory Committee Staff; Appendix B- Brief Descriptions of Records Accessions in the Advisory Committee on Human Radiation Experiments (ACHRE) Research Document Collection; Appendix C- Bibliography of Secondary Sources Used by ACHRE; Appendix D- Brief Descriptions of Human Radiation Experiments Identified by ACHRE,more » and Indexes; Appendix E- Documents Cited in the ACHRE Final Report and other Separately Described Materials from the ACHRE Document Collection; Appendix F- Schedule of Advisory Committee Meetings and Meeting Documentation; and Appendix G- Technology Note.« less

SutraPlot, a graphical post-processor for SUTRA, a model for ground-water flow with solute or energy transport

USGS Publications Warehouse

Souza, W.R.

1999-01-01

This report documents a graphical display post-processor (SutraPlot) for the U.S. Geological Survey Saturated-Unsaturated flow and solute or energy TRAnsport simulation model SUTRA, Version 2D3D.1. This version of SutraPlot is an upgrade to SutraPlot for the 2D-only SUTRA model (Souza, 1987). It has been modified to add 3D functionality, a graphical user interface (GUI), and enhanced graphic output options. Graphical options for 2D SUTRA (2-dimension) simulations include: drawing the 2D finite-element mesh, mesh boundary, and velocity vectors; plots of contours for pressure, saturation, concentration, and temperature within the model region; 2D finite-element based gridding and interpolation; and 2D gridded data export files. Graphical options for 3D SUTRA (3-dimension) simulations include: drawing the 3D finite-element mesh; plots of contours for pressure, saturation, concentration, and temperature in 2D sections of the 3D model region; 3D finite-element based gridding and interpolation; drawing selected regions of velocity vectors (projected on principal coordinate planes); and 3D gridded data export files. Installation instructions and a description of all graphic options are presented. A sample SUTRA problem is described and three step-by-step SutraPlot applications are provided. In addition, the methodology and numerical algorithms for the 2D and 3D finite-element based gridding and interpolation, developed for SutraPlot, are described. 1

Ontology-based reusable clinical document template production system.

PubMed

Nam, Sejin; Lee, Sungin; Kim, James G Boram; Kim, Hong-Gee

2012-01-01

Clinical documents embody professional clinical knowledge. This paper shows an effective clinical document template (CDT) production system that uses a clinical description entity (CDE) model, a CDE ontology, and a knowledge management system called STEP that manages ontology-based clinical description entities. The ontology represents CDEs and their inter-relations, and the STEP system stores and manages CDE ontology-based information regarding CDTs. The system also provides Web Services interfaces for search and reasoning over clinical entities. The system was populated with entities and relations extracted from 35 CDTs that were used in admission, discharge, and progress reports, as well as those used in nursing and operation functions. A clinical document template editor is shown that uses STEP.

The element of naturalness when evaluating image quality of digital photo documentation after sexual assault.

PubMed

Ernst, E J; Speck, P M; Fitzpatrick, J J

2012-01-01

Digital photography is a valuable adjunct to document physical injuries after sexual assault. In order for a digital photograph to have high image quality, there must exist a high level of naturalness. Digital photo documentation has varying degrees of naturalness; however, for a photograph to be natural, specific technical elements for the viewer must be satisfied. No tool was available to rate the naturalness of digital photo documentation of female genital injuries after sexual assault. The Photo Documentation Image Quality Scoring System (PDIQSS) tool was developed to rate technical elements for naturalness. Using this tool, experts evaluated randomly selected digital photographs of female genital injuries captured following sexual assault. Naturalness of female genital injuries following sexual assault was demonstrated when measured in all dimensions.

Analysis of in-flight boundary-layer state measurements on a subsonic transport wing in high-lift configuration

NASA Technical Reports Server (NTRS)

vanDam, C. P.; Los, S. M.; Miley, S. J.; Yip, L. P.; Banks, D. W.; Roback, V. E.; Bertelrud, A.

1995-01-01

Flight experiments on NASA Langley's B737-100 (TSRV) airplane have been conducted to document flow characteristics in order to further the understanding of high-lift flow physics, and to correlate and validate computational predictions and wind-tunnel measurements. The project is a cooperative effort involving NASA, industry, and universities. In addition to focusing on in-flight measurements, the project includes extensive application of various computational techniques, and correlation of flight data with computational results and wind-tunnel measurements. Results obtained in the most recent phase of flight experiments are analyzed and presented in this paper. In-flight measurements include surface pressure distributions, measured using flush pressure taps and pressure belts on the slats, main element, and flap elements; surface shear stresses, measured using Preston tubes; off-surface velocity distributions, measured using shear-layer rakes; aeroelastic deformations of the flap elements, measured using an optical positioning system; and boundary-layer transition phenomena, measured using hot-film anemometers and an infrared imaging system. The analysis in this paper primarily focuses on changes in the boundary-layer state that occurred on the slats, main element, and fore flap as a result of changes in flap setting and/or flight condition. Following a detailed description of the experiment, the boundary-layer state phenomenon will be discussed based on data measured during these recent flight experiments.

Environmental/Biomedical Terminology Index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huffstetler, J.K.; Dailey, N.S.; Rickert, L.W.

1976-12-01

The Information Center Complex (ICC), a centrally administered group of information centers, provides information support to environmental and biomedical research groups and others within and outside Oak Ridge National Laboratory. In-house data base building and development of specialized document collections are important elements of the ongoing activities of these centers. ICC groups must be concerned with language which will adequately classify and insure retrievability of document records. Language control problems are compounded when the complexity of modern scientific problem solving demands an interdisciplinary approach. Although there are several word lists, indexes, and thesauri specific to various scientific disciplines usually groupedmore » as Environmental Sciences, no single generally recognized authority can be used as a guide to the terminology of all environmental science. If biomedical terminology for the description of research on environmental effects is also needed, the problem becomes even more complex. The building of a word list which can be used as a general guide to the environmental/biomedical sciences has been a continuing activity of the Information Center Complex. This activity resulted in the publication of the Environmental Biomedical Terminology Index (EBTI).« less

The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

PubMed

Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

2016-09-01

Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

DUB: A Format for Writing Descriptive Literature. Dissemination Document No. 9.

ERIC Educational Resources Information Center

Levine, S. Joseph; Keith, Kitty

Presented is DUB (description, use, and benefits of an idea), a format for special education teachers to use in writing descriptions of self-developed materials and methods; and included are six examples of the format. The DUB format prescribes the inclusion in brief essay form of the following information: descriptive material (structural…

Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.

Assessing written communication during interhospital transfers of emergency general surgery patients

PubMed Central

Harl, Felicity N.R.; Saucke, Megan C.; Greenberg, Caprice C.; Ingraham, Angela M.

2017-01-01

Background Poor communication causes fragmented care. Studies of transitions of care within a hospital and on discharge suggest significant communication deficits. Communication during transfers between hospitals has not been well studied. We assessed the written communication provided during interhospital transfers of emergency general surgery patients. We hypothesized that patients are transferred with incomplete documentation from referring facilities. Methods We performed a retrospective review of written communication provided during interhospital transfers to our emergency department (ED) from referring EDs for emergency general surgical evaluation between January 1, 2014 and January 1, 2016. Elements of written communication were abstracted from referring facility documents scanned into the medical record using a standardized abstraction protocol. Descriptive statistics summarized the information communicated. Results A total of 129 patients met inclusion criteria. 87.6% (n = 113) of charts contained referring hospital documents. 42.5% (n = 48) were missing history and physicals. Diagnoses were missing in 9.7% (n = 11). Ninety-one computed tomography scans were performed; a mong 70 with reads, final reads were absent for 70.0% (n = 49). 45 ultrasounds and x-rays were performed; among 27 with reads, final reads were missing for 80.0% (n = 36). Reasons for transfer were missing in 18.6% (n = 21). Referring hospital physicians outside the ED were consulted in 32.7% (n = 37); consultants’ notes were absent in 89.2% (n = 33). In 12.4% (n = 14), referring documents arrived after the patient’s ED arrival and were not part of the original documentation provided. Conclusions This study documents that information important to patient care is often missing in the written communication provided during interhospital transfers. This gap affords a foundation for standardizing provider communication during interhospital transfers. PMID:28624064

School practices to promote social distancing in K-12 schools: review of influenza pandemic policies and practices.

PubMed

Uscher-Pines, Lori; Schwartz, Heather L; Ahmed, Faruque; Zheteyeva, Yenlik; Meza, Erika; Baker, Garrett; Uzicanin, Amra

2018-03-27

During an evolving influenza pandemic, community mitigation strategies, such as social distancing, can slow down virus transmission in schools and surrounding communities. To date, research on school practices to promote social distancing in primary and secondary schools has focused on prolonged school closure, with little attention paid to the identification and feasibility of other more sustainable interventions. To develop a list and typology of school practices that have been proposed and/or implemented in an influenza pandemic and to uncover any barriers identified, lessons learned from their use, and documented impacts. We conducted a review of the peer-reviewed and grey literature on social distancing interventions in schools other than school closure. We also collected state government guidance documents directed to local education agencies or schools to assess state policies regarding social distancing. We collected standardized information from each document using an abstraction form and generated descriptive statistics on common plan elements. The document review revealed limited literature on school practices to promote social distancing, as well as limited incorporation of school practices to promote social distancing into state government guidance documents. Among the 38 states that had guidance documents that met inclusion criteria, fewer than half (42%) mentioned a single school practice to promote social distancing, and none provided any substantive detail about the policies or practices needed to enact them. The most frequently identified school practices were cancelling or postponing after-school activities, canceling classes or activities with a high rate of mixing/contact that occur within the school day, and reducing mixing during transport. Little information is available to schools to develop policies and procedures on social distancing. Additional research and guidance are needed to assess the feasibility and effectiveness of school practices to promote social distancing.

a 3d GIS Method Applied to Cataloging and Restoring: the Case of Aurelian Walls at Rome

NASA Astrophysics Data System (ADS)

Canciani, M.; Ceniccola, V.; Messi, M.; Saccone, M.; Zampilli, M.

2013-07-01

The project involves architecture, archaeology, restoration, graphic documentation and computer imaging. The objective is development of a method for documentation of an architectural feature, based on a three-dimensional model obtained through laser scanning technologies, linked to a database developed in GIS environment. The case study concerns a short section of Rome's Aurelian walls, including the Porta Latina. The city walls are Rome's largest single architectural monument, subject to continuous deterioration, modification and maintenance since their original construction beginning in 271 AD. The documentation system provides a flexible, precise and easily-applied instrument for recording the full appearance, materials, stratification palimpsest and conservation status, in order to identify restoration criteria and intervention priorities, and to monitor and control the use and conservation of the walls over time. The project began with an analysis and documentation campaign integrating direct, traditional recording methods with indirect, topographic instrument and 3D laser scanning recording. These recording systems permitted development of a geographic information system based on three-dimensional modelling of separate, individual elements, linked to a database and related to the various stratigraphic horizons, the construction techniques, the component materials and their state of degradation. The investigations of the extant wall fabric were further compared to historic documentation, from both graphic and descriptive sources. The resulting model constitutes the core of the GIS system for this specific monument. The methodology is notable for its low cost, precision, practicality and thoroughness, and can be applied to the entire Aurelian wall and to other monuments.

A Decade of Experience in Creating and Maintaining Data Elements for Structured Clinical Documentation in EHRs

PubMed Central

Zhou, Li; Collins, Sarah; Morgan, Stephen J.; Zafar, Neelam; Gesner, Emily J.; Fehrenbach, Martin; Rocha, Roberto A.

2016-01-01

Structured clinical documentation is an important component of electronic health records (EHRs) and plays an important role in clinical care, administrative functions, and research activities. Clinical data elements serve as basic building blocks for composing the templates used for generating clinical documents (such as notes and forms). We present our experience in creating and maintaining data elements for three different EHRs (one home-grown and two commercial systems) across different clinical settings, using flowsheet data elements as examples in our case studies. We identified basic but important challenges (including naming convention, links to standard terminologies, and versioning and change management) and possible solutions to address them. We also discussed more complicated challenges regarding governance, documentation vs. structured data capture, pre-coordination vs. post-coordination, reference information models, as well as monitoring, communication and training. PMID:28269927

Student Perceptions of Online Radiologic Science Courses.

PubMed

Papillion, Erika; Aaron, Laura

2017-03-01

To evaluate student perceptions of the effectiveness of online radiologic science courses by examining various learning activities and course characteristics experienced in the online learning environment. A researcher-designed electronic survey was used to obtain results from students enrolled in the clinical portion of a radiologic science program that offers online courses. The survey consisted of elements associated with demographics, experience, and perceptions related to online radiologic science courses. Surveys were sent to 35 program directors of Joint Review Committee on Education in Radiologic Technology-accredited associate and bachelor's degree programs with requests to share the survey with students. The 38 students who participated in the survey identified 4 course characteristics most important for effective online radiologic science courses: a well-organized course, timely instructor feedback, a variety of learning activities, and informative documents, such as course syllabus, calendar, and rubrics. Learner satisfaction is a successful indicator of engagement in online courses. Descriptive statistical analysis indicated that elements related to the instructor's role is one of the most important components of effectiveness in online radiologic science courses. This role includes providing an organized course with informative documents, a variety of learning activities, and timely feedback and communication. Although online courses should provide many meaningful learning activities that appeal to a wide range of learning styles, the nature of the course affects the types of learning activities used and therefore could decrease the ability to vary learning activities. ©2017 American Society of Radiologic Technologists.

Curso: Auxiliar de Farmacia. Guia. Farmacia Teorica: Manual del Estudiante. Matematica General: Manual del Estudiante. Documento de Trabajo (Pharmacy Assistant Course Guide. Theoretical Pharmacy Student Manual. General Mathematics Student Manual. Working Document).

ERIC Educational Resources Information Center

Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

The three parts of this document are intended for a 3-semester course for pharmacy assistants. The course guide contains the following sections: occupational description; educational philosophy; general objectives; tasks/competencies for each unit; course organization; brief description of the topics; student standards; and evaluation methods.…

Variation in printed handoff documents: Results and recommendations from a multicenter needs assessment.

PubMed

Rosenbluth, Glenn; Bale, James F; Starmer, Amy J; Spector, Nancy D; Srivastava, Rajendu; West, Daniel C; Sectish, Theodore C; Landrigan, Christopher P

2015-08-01

Handoffs of patient care are a leading root cause of medical errors. Standardized techniques exist to minimize miscommunications during verbal handoffs, but studies to guide standardization of printed handoff documents are lacking. To determine whether variability exists in the content of printed handoff documents and to identify key data elements that should be uniformly included in these documents. Pediatric hospitalist services at 9 institutions in the United States and Canada. Sample handoff documents from each institution were reviewed, and structured group interviews were conducted to understand each institution's priorities for written handoffs. An expert panel reviewed all handoff documents and structured group-interview findings, and subsequently made consensus-based recommendations for data elements that were either essential or recommended, including best overall printed handoff practices. Nine sites completed structured group interviews and submitted data. We identified substantial variation in both the structure and content of printed handoff documents. Only 4 of 23 possible data elements (17%) were uniformly present in all sites' handoff documents. The expert panel recommended the following as essential for all printed handoffs: assessment of illness severity, patient summary, action items, situation awareness and contingency plans, allergies, medications, age, weight, date of admission, and patient and hospital service identifiers. Code status and several other elements were also recommended. Wide variation exists in the content of printed handoff documents. Standardizing printed handoff documents has the potential to decrease omissions of key data during patient care transitions, which may decrease the risk of downstream medical errors. © 2015 Society of Hospital Medicine.

The effect of electronic health record software design on resident documentation and compliance with evidence-based medicine.

PubMed

Rodriguez Torres, Yasaira; Huang, Jordan; Mihlstin, Melanie; Juzych, Mark S; Kromrei, Heidi; Hwang, Frank S

2017-01-01

This study aimed to determine the role of electronic health record software in resident education by evaluating documentation of 30 elements extracted from the American Academy of Ophthalmology Dry Eye Syndrome Preferred Practice Pattern. The Kresge Eye Institute transitioned to using electronic health record software in June 2013. We evaluated the charts of 331 patients examined in the resident ophthalmology clinic between September 1, 2011, and March 31, 2014, for an initial evaluation for dry eye syndrome. We compared documentation rates for the 30 evidence-based elements between electronic health record chart note templates among the ophthalmology residents. Overall, significant changes in documentation occurred when transitioning to a new version of the electronic health record software with average compliance ranging from 67.4% to 73.6% (p < 0.0005). Electronic Health Record A had high compliance (>90%) in 13 elements while Electronic Health Record B had high compliance (>90%) in 11 elements. The presence of dialog boxes was responsible for significant changes in documentation of adnexa, puncta, proptosis, skin examination, contact lens wear, and smoking exposure. Significant differences in documentation were correlated with electronic health record template design rather than individual resident or residents' year in training. Our results show that electronic health record template design influences documentation across all resident years. Decreased documentation likely results from "mouse click fatigue" as residents had to access multiple dialog boxes to complete documentation. These findings highlight the importance of EHR template design to improve resident documentation and integration of evidence-based medicine into their clinical notes.

Descriptive approaches to landscape analysis

Treesearch

R. Burton Litton Jr.

1979-01-01

Descriptive landscape analyses include various procedures used to document visual/scenic resources. Historic and regional examples of landscape description represent desirable insight for contemporary professional inventory work. Routed and areal landscape inventories are discussed as basic tools. From them, qualitative and quantitative evaluations can be developed...

Optimizing Libraries’ Content Findability Using Simple Object Access Protocol (SOAP) With Multi-Tier Architecture

NASA Astrophysics Data System (ADS)

Lahinta, A.; Haris, I.; Abdillah, T.

2017-03-01

The aim of this paper is to describe a developed application of Simple Object Access Protocol (SOAP) as a model for improving libraries’ digital content findability on the library web. The study applies XML text-based protocol tools in the collection of data about libraries’ visibility performance in the search results of the book. Model from the integrated Web Service Document Language (WSDL) and Universal Description, Discovery and Integration (UDDI) are applied to analyse SOAP as element within the system. The results showed that the developed application of SOAP with multi-tier architecture can help people simply access the website in the library server Gorontalo Province and support access to digital collections, subscription databases, and library catalogs in each library in Regency or City in Gorontalo Province.

Annulate lamellae in phloem cells of virus-infected Sonchus plants

PubMed Central

1977-01-01

The occurrence of annulate lamellae (AL) in differentiating phloem of Sonchus oleraceus (Compositae) singly infected with sowthistle yellow vein virus (SYVV) and doubly infected with a combination of SYVV and beet yellow stunt virus is documented by electron microscopy. Cell types in which AL were found were immature sieve elements and phloem parenchyma cells. AL were found only in cells that also contained SYVV particles although a direct association between the virus and AL was not apparent. The substructure of the AL and the relationships between the AL and the nuclear envelope and endoplasmic reticulum are similar to those reported in other descriptions of this organelle in the literature. This report appears to be the first one concerning the association of AL with a plant virus disease. PMID:873998

Annulate lamellae in phloem cells of virus-infected Sonchus plants.

PubMed

Steinkamp, M P; Hoefert, L L

1977-07-01

The occurrence of annulate lamellae (AL) in differentiating phloem of Sonchus oleraceus (Compositae) singly infected with sowthistle yellow vein virus (SYVV) and doubly infected with a combination of SYVV and beet yellow stunt virus is documented by electron microscopy. Cell types in which AL were found were immature sieve elements and phloem parenchyma cells. AL were found only in cells that also contained SYVV particles although a direct association between the virus and AL was not apparent. The substructure of the AL and the relationships between the AL and the nuclear envelope and endoplasmic reticulum are similar to those reported in other descriptions of this organelle in the literature. This report appears to be the first one concerning the association of AL with a plant virus disease.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Department of Energy (DOE) has contracted with Asea Brown Boveri-Combustion Engineering (ABB-CE) to provide information on the capability of ABB-CE`s System 80 + Advanced Light Water Reactor (ALWR) to transform, through reactor burnup, 100 metric tonnes (MT) of weapons grade plutonium (Pu) into a form which is not readily useable in weapons. This information is being developed as part of DOE`s Plutonium Disposition Study, initiated by DOE in response to Congressional action. This document, Volume 1, presents a technical description of the various elements of the System 80 + Standard Plant Design upon which the Plutonium Disposition Study wasmore » based. The System 80 + Standard Design is fully developed and directly suited to meeting the mission objectives for plutonium disposal. The bass U0{sub 2} plant design is discussed here.« less

SEACAS Theory Manuals: Part III. Finite Element Analysis in Nonlinear Solid Mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laursen, T.A.; Attaway, S.W.; Zadoks, R.I.

1999-03-01

This report outlines the application of finite element methodology to large deformation solid mechanics problems, detailing also some of the key technological issues that effective finite element formulations must address. The presentation is organized into three major portions: first, a discussion of finite element discretization from the global point of view, emphasizing the relationship between a virtual work principle and the associated fully discrete system, second, a discussion of finite element technology, emphasizing the important theoretical and practical features associated with an individual finite element; and third, detailed description of specific elements that enjoy widespread use, providing some examples ofmore » the theoretical ideas already described. Descriptions of problem formulation in nonlinear solid mechanics, nonlinear continuum mechanics, and constitutive modeling are given in three companion reports.« less

U-10Mo Baseline Fuel Fabrication Process Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

Advisory Committee on human radiation experiments. Final report, Supplemental Volume 2. Sources and documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This volume and its appendixes supplement the Advisory Committee`s final report by reporting how we went about looking for information concerning human radiation experiments and intentional releases, a description of what we found and where we found it, and a finding aid for the information that we collected. This volume begins with an overview of federal records, including general descriptions of the types of records that have been useful and how the federal government handles these records. This is followed by an agency-by-agency account of the discovery process and descriptions of the records reviewed, together with instructions on how tomore » obtain further information from those agencies. There is also a description of other sources of information that have been important, including institutional records, print resources, and nonprint media and interviews. The third part contains brief accounts of ACHRE`s two major contemporary survey projects (these are described in greater detail in the final report and another supplemental volume) and other research activities. The final section describes how the ACHRE information-nation collections were managed and the records that ACHRE created in the course of its work; this constitutes a general finding aid for the materials deposited with the National Archives. The appendices provide brief references to federal records reviewed, descriptions of the accessions that comprise the ACHRE Research Document Collection, and descriptions of the documents selected for individual treatment. Also included are an account of the documentation available for ACHRE meetings, brief abstracts of the almost 4,000 experiments individually described by ACHRE staff, a full bibliography of secondary sources used, and other information.« less

ICEG2D: An Integrated Software Package for Automated Prediction of Flow Fields for Single-Element Airfoils with Ice Accretion

NASA Technical Reports Server (NTRS)

Thompson, David S.; Soni, Bharat K.

2000-01-01

An integrated software package, ICEG2D, was developed to automate computational fluid dynamics (CFD) simulations for single-element airfoils with ice accretion. ICEG2D is designed to automatically perform three primary functions: (1) generating a grid-ready, surface definition based on the geometrical characteristics of the iced airfoil surface, (2) generating a high-quality grid using the generated surface point distribution, and (3) generating the input and restart files needed to run the general purpose CFD solver NPARC. ICEG2D can be executed in batch mode using a script file or in an interactive mode by entering directives from a command line. This report summarizes activities completed in the first year of a three-year research and development program to address issues related to CFD simulations for aircraft components with ice accretion. Specifically, this document describes the technology employed in the software, the installation procedure, and a description of the operation of the software package. Validation of the geometry and grid generation modules of ICEG2D is also discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manzini, Gianmarco

This document contains working annotations on the Virtual Element Method (VEM) for the approximate solution of diffusion problems with variable coefficients. To read this document you are assumed to have familiarity with concepts from the numerical discretization of Partial Differential Equations (PDEs) and, in particular, the Finite Element Method (FEM). This document is not an introduction to the FEM, for which many textbooks (also free on the internet) are available. Eventually, this document is intended to evolve into a tutorial introduction to the VEM (but this is really a long-term goal).

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

Differences in Reporting of Analyses in Internal Company Documents Versus Published Trial Reports: Comparisons in Industry-Sponsored Trials in Off-Label Uses of Gabapentin

PubMed Central

Vedula, S. Swaroop; Li, Tianjing; Dickersin, Kay

2013-01-01

Background Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. Methods and Findings For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Conclusions Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded. Please see later in the article for the Editors' Summary PMID:23382656

Documentation of preventive care for pressure ulcers initiated during annual evaluations in SCI.

PubMed

Guihan, Marylou; Murphy, Deidre; Rogers, Thea J; Parachuri, Ramadevi; Sae Richardson, Michael; Lee, Kenneth K; Bates-Jensen, Barbara M

2016-05-01

Community-acquired pressure ulcers (PrUs) are a frequent cause of hospitalization of Veterans with spinal cord injury (SCI). The Veterans Health Administration (VHA) recommends that SCI annual evaluations include assessment of PrU risk factors, a thorough skin inspection and sharing of recommendations for PrU prevention strategies. We characterized consistency of preventive skin care during annual evaluations for Veterans with SCI as a first step in identifying strategies to more actively promote PrU prevention care in other healthcare encounters. Retrospective cross-sectional observational design, including review of electronic medical records for 206 Veterans with SCI admitted to 2 VA SCI centers from January-December, 2011. Proportion of applicable skin health elements documented (number of applicable elements/skin health elements documented). Our sample was primarily white (78%) male (96.1%), and mean age = 61 years. 40% of participants' were hospitalized for PrU treatment, with a mean of 294 days (median = 345 days) from annual evaluation to the index admission. On average, Veterans received an average of 75.5% (IQR 68-86%) of applicable skin health elements. Documentation of applicable skin health elements was significantly higher during inpatient vs. outpatient annual evaluations (mean elements received = 80.3% and 64.3%, respectively, P > 0.001). No significant differences were observed in documentation of skin health elements by Veterans at high vs. low PrU risk. Additional PrU preventive care in the VHA outpatient setting may increase identification and detection of PrU risk factors and early PrU damage for Veterans with SCI in the community, allowing for earlier intervention.

Nontraditional Training and Employment Progams Serving Women Directory.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

This document provides short descriptions of 125 programs providing job training and preemployment skills training for women in nontraditional occupations (primarily skilled trades and crafts). Eighteen exemplary programs in all regions of the country are described. These descriptions are followed by descriptions of other training programs,…

Automated Test Methods for XML Metadata

DTIC Science & Technology

2017-12-28

Group under RCC Task TG-147. This document (Volume VI of the RCC Document 118 series) describes procedures used for evaluating XML metadata documents...including TMATS, MDL, IHAL, and DDML documents. These documents contain specifications or descriptions of artifacts and systems of importance to...the collection and management of telemetry data. The methods defined in this report provide a means of evaluating the suitability of such a metadata

Program Helps Standardize Documentation Of Software

NASA Technical Reports Server (NTRS)

Howe, G.

1994-01-01

Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.

Consolidated Development Objectives Document (CDOD) For MB-60

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

This document defines the objectives related to liquid rocket engine system development to be undertaken by JAXA in support of the Space Launch System (SLS) Program managed out of the NASA Marshall Space Flight Center (MSFC). These objectives include furnishing the necessary management, labor, facilities, tools, equipment, and materials required to execute the specified activities. 1.1 Project Scope: The scope of this effort is to develop a rocket engine and associated products per the objectives and technical requirements established in this document. This engine, minus the engine controller, designated here as MB ]60, is to be developed through to a prequalification point of maturity. It is assumed that should JCNE ]1 development proceed beyond this maturity point towards actual flight qualification, the engine controller will be supplied and integrated by NASA. 1.2 Document Structure: The structure of this Consolidated Development Objectives Document (CDOD) includes a traditional description of objectives in a SOO, plus the associated Data Products Document (DPD) in an attached appendix, and then Engine Requirements Document (ERD) as another attached appendix. It is the intent that this document, in conjunction with the cited applicable documents, should constitute a complete programmatic and technical description of the development effort to be pursued.

Perceptions of housing conditions among migrant farmworkers and their families: implications for health, safety and social policy.

PubMed

Keim-Malpass, Jessica; Spears Johnson, Chaya R; Quandt, Sara A; Arcury, Thomas A

2015-01-01

In the USA, migrant farmworkers are a vulnerable group due to their low socioeconomic status, risk of occupational exposures and injury, lack of social mobility, lack of adequate access to health services and dependency on employer for provided housing. Previous reports have documented migrant farmworker housing conditions to be variable, but poor overall. This paper explores the perceptions of housing conditions among migrant farmworkers in rural North Carolina, and develops an understanding of potential impacts of their housing on health and safety. This study used qualitative descriptive data and directed content analysis to analyse semi-structured interviews and photographs that were data elements of a larger community-based participatory research study designed to document housing quality and health among North Carolina farmworkers. Many of the study participants described poor housing conditions that were reflected in the photographic analysis of the houses and camps. Specific problems described by the participants include exposure to pesticides, safety issues, pests, water supply and air quality, temperature and moisture. This study describes migrant farmworkers' perceptions of housing quality and numerous potential impacts on health and safety. Research, social policy and practice-based implications derived from this research could serve to improve the health status of these individuals and their families. This study suggests there is much room for sustained advocacy and action, given that many of the farmworkers' descriptions and photographs depicted housing conditions below accepted standards of living. Access to adequate and safe employer-provided housing for migrant farmworkers should be considered a basic human right.

Perceptions of housing conditions among migrant farmworkers and their families: Implications for health, safety and social policy

PubMed Central

Keim-Malpass, Jessica; Spears, Chaya R.; Quandt, Sara A.; Arcury, Thomas A.

2016-01-01

Introduction In the United States, migrant farmworkers are a vulnerable group due to their low socioeconomic status, risk of occupational exposures and injury, lack of social mobility, lack of adequate access to health services and dependency on employer for provided housing. Previous reports have documented migrant farmworker housing conditions to be variable, but poor overall. This paper explores the perceptions of housing conditions among migrant farmworkers in rural North Carolina, as well as understanding potential impacts of their housing on health and safety. Methods This study used qualitative descriptive data and directed content analysis to analyze semi-structured interviews and photographs that were data elements of a larger community-based participatory research study designed to document housing quality and health among North Carolina farmworkers. Results Many of the study participants described poor housing conditions that were reflected in the photographic analysis of the houses and camps. Specific problems described by the participants include: exposure to pesticides, safety issues, pests, water supply and air quality, temperature and moisture. Conclusions This study describes migrant farmworkers’ perceptions of housing quality and numerous potential impacts on health and safety. Research, social policy and practice-based implications derived from this research could serve to improve the health status of these individuals and their families. This study suggests there is much room for sustained advocacy and action, given that many of the farmworkers’ descriptions and photographs depicted housing conditions below accepted standards of living. Access to adequate and safe employer-provided housing for migrant farmworkers should be considered a basic human right. PMID:25682066

South Florida freight advanced traveler information system : architecture and implementation as built documentation report.

DOT National Transportation Integrated Search

2015-05-01

The primary purpose of the As Built Documentation is to provide a description of any modifications made to the original architecture along with justification as to why the architecture was changed. In addition, this documentation provides the followi...

IDC System Specification Document.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clifford, David J.

2014-12-01

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

The design and implementation of an automated system for logging clinical experiences using an anesthesia information management system.

PubMed

Simpao, Allan; Heitz, James W; McNulty, Stephen E; Chekemian, Beth; Brenn, B Randall; Epstein, Richard H

2011-02-01

Residents in anesthesia training programs throughout the world are required to document their clinical cases to help ensure that they receive adequate training. Current systems involve self-reporting, are subject to delayed updates and misreported data, and do not provide a practicable method of validation. Anesthesia information management systems (AIMS) are being used increasingly in training programs and are a logical source for verifiable documentation. We hypothesized that case logs generated automatically from an AIMS would be sufficiently accurate to replace the current manual process. We based our analysis on the data reporting requirements of the American College of Graduate Medical Education (ACGME). We conducted a systematic review of ACGME requirements and our AIMS record, and made modifications after identifying data element and attribution issues. We studied 2 methods (parsing of free text procedure descriptions and CPT4 procedure code mapping) to automatically determine ACGME case categories and generated AIMS-based case logs and compared these to assignments made by manual inspection of the anesthesia records. We also assessed under- and overreporting of cases entered manually by our residents into the ACGME website. The parsing and mapping methods assigned cases to a majority of the ACGME categories with accuracies of 95% and 97%, respectively, as compared with determinations made by 2 residents and 1 attending who manually reviewed all procedure descriptions. Comparison of AIMS-based case logs with reports from the ACGME Resident Case Log System website showed that >50% of residents either underreported or overreported their total case counts by at least 5%. The AIMS database is a source of contemporaneous documentation of resident experience that can be queried to generate valid, verifiable case logs. The extent of AIMS adoption by academic anesthesia departments should encourage accreditation organizations to support uploading of AIMS-based case log files to improve accuracy and to decrease the clerical burden on anesthesia residents.

Concept for an International Standard related to Space Weather Effects on Space Systems

NASA Astrophysics Data System (ADS)

Tobiska, W. Kent; Tomky, Alyssa

There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances in scientific and engineering understanding. We present a draft outline that can be used as the basis for such a standard.

Hanford Waste Vitrification Plant technical manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.E.; Watrous, R.A.; Kruger, O.L.

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. Themore » immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.« less

Comparison of common data elements from the Managing Epilepsy Well (MEW) Network integrated database and a well-characterized sample with nonepileptic seizures.

PubMed

LaFrance, W Curt; Ranieri, Rebecca; Bamps, Yvan; Stoll, Shelley; Sahoo, Satya S; Welter, Elisabeth; Sams, Johnny; Tatsuoka, Curtis; Sajatovic, Martha

2015-04-01

Epilepsy and psychogenic nonepileptic seizures (PNES) are both chronic illnesses characterized by similar and overlapping clinical features. A limited number of studies comparing people with epilepsy (PWE) and patients with PNES that address determinants of health outcomes exist. We conducted an analysis using a well-characterized sample of people with PNES and the Managing Epilepsy Well (MEW) Network integrated data, comparing descriptive data on samples with epilepsy and with documented PNES. Based on the pooled data, we hypothesized that people with PNES would have worse QOL and higher depression severity than PWE. We used data from the MEW Network integrated database involving select epilepsy self-management studies comprising 182 PWE and 305 individuals with documented PNES from the Rhode Island Hospital Neuropsychiatry and Behavioral Neurology Clinic. We conducted a matched, case-control study assessing descriptive comparisons on 16 common data elements that included gender, age, ethnicity, race, education, employment, income, household composition, relationship status, age at seizure onset, frequency of seizures, seizure type, health status, healthy days, quality of life, and depression. Standardized rating scales for depression and quality of life were used. Median seizure frequency in the last 30days for PWE was 1, compared to 15 for patients with PNES (p<0.05). People with epilepsy had a QOLIE-10 mean score of 3.00 (SD: 0.91) compared to 3.54 (0.88) (p<0.01) for patients with PNES. Depression severity was moderate to severe in 7.7% of PWE compared to 34.1% (p<0.05) of patients with PNES. People with epilepsy in selected MEW Network programs are fairly well educated, mostly women, with few minorities and low monthly seizure rates. Those with PNES, however, have higher levels of not working/on disability and had more frequent seizures, higher depression severity, and worse QOL. These differences were present despite demographics that are largely similar in both groups, illustrating that other determinants of illness may influence PNES. Copyright © 2015. Published by Elsevier Inc.

28 CFR 68.18 - Discovery-general provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...

28 CFR 68.18 - Discovery-general provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...

28 CFR 68.18 - Discovery-general provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...

28 CFR 68.18 - Discovery-general provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...

78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... the status, benefits, and costs of video description on television and Internet- provided video... operational issues, costs, and benefits of providing video descriptions for video programming that is... document, the Federal Communications Commission (Commission) solicits public comment on issues related to...

48 CFR 811.104-70 - Brand name or equal purchase descriptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal... Requirements Documents 811.104-70 Brand name or equal purchase descriptions. (a) The specification writer may use purchase descriptions that contain references to one or more brand name products only in...

48 CFR 811.104 - Use of brand name or equal purchase descriptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Use of brand name or equal purchase descriptions. 811.104 Section 811.104 Federal Acquisition Regulations System DEPARTMENT OF... Requirements Documents 811.104 Use of brand name or equal purchase descriptions. ...

29 CFR 1607.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...

29 CFR 1607.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...

29 CFR 1607.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...

29 CFR 1607.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...

New Hampshire VIEW (Vital Information for Education & Work). 1976 Revised Edition.

ERIC Educational Resources Information Center

Paul, Nicholas L.; Skinner, William R.

Designed as an aid to occupational guidance, this document contains 360 alphabetically arranged job descriptions. It is an update of the three-volume "New Hampshire Jobs" series published in 1973. Each job description sheet includes job title, "Dictionary of Occupational Titles" (DOT) number, brief description, skills required, appropriate…

40 CFR 136.7 - Quality assurance and quality control.

Code of Federal Regulations, 2014 CFR

2014-07-01

... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

40 CFR 136.7 - Quality assurance and quality control.

Code of Federal Regulations, 2013 CFR

2013-07-01

... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

40 CFR 136.7 - Quality assurance and quality control.

Code of Federal Regulations, 2012 CFR

2012-07-01

... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

UTM TCL 2.0 Software Version Description (SVD) Document

NASA Technical Reports Server (NTRS)

Mcguirk, Patrick

2017-01-01

This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

SIENA Customer Problem Statement and Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. Sauer; R. Clay; C. Adams

2000-08-01

This document describes the problem domain and functional requirements of the SIENA framework. The software requirements and system architecture of SIENA are specified in separate documents (called SIENA Software Requirement Specification and SIENA Software Architecture, respectively). While currently this version of the document describes the problems and captures the requirements within the Analysis domain (concentrating on finite element models), it is our intention to subsequent y expand this document to describe problems and capture requirements from the Design and Manufacturing domains. In addition, SIENA is designed to be extendible to support and integrate elements from the other domains (see SIENAmore » Software Architecture document).« less

2013 RFP Ports Initiative Supporting Documents

EPA Pesticide Factsheets

Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides

2014 RFP Ports Initiative Supporting Documents

EPA Pesticide Factsheets

Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides

Space station integrated propulsion and fluid system study: Fluid systems configuration databook

NASA Technical Reports Server (NTRS)

Rose, L.; Bicknell, B.; Bergman, D.; Wilson, S.

1987-01-01

This databook contains fluid system requirements and system descriptions for Space Station program elements including the United States and International modules, integrated fluid systems, attached payloads, fluid servicers and vehicle accommodation facilities. Separate sections are devoted to each of the program elements and include a discussion of the overall system requirements, specific fluid systems requirements and systems descriptions. The systems descriptions contain configurations, fluid inventory data and component lists. In addition, a list of information sources is referenced at the end of each section.

Gaia DR2 documentation Chapter 8: Astrophysical Parameters

NASA Astrophysics Data System (ADS)

Manteiga, M.; Andrae, R.; Fouesneau, M.; Creevey, O.; Ordenovic, C.; Mary, N.; Jean-Antoine-Piccolo, A.; Bailer-Jones, C. A. L.

2018-04-01

This chapter of the Gaia DR2 documentation describes Apsis, the Astrophysical Parameters Inference System used for processing Gaia DR2 data. Beyond this documentation, a complete description of the processing and the results, as well as additional validations, have been published in Andrae et al. (2018).

75 FR 18872 - Ginnie Mae Multiclass Securities Program Documents

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-13

... Securities Program Documents AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY... with the Multiclass Securities Program. The intent of the Multiclass Securities program is to increase... Securities Program Documents. OMB Approval Number: 2503-0030. Form Numbers: None. Description of the Need for...

Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)

NASA Technical Reports Server (NTRS)

Yim, Hester

2013-01-01

This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.

The computational structural mechanics testbed data library description

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1988-01-01

The datasets created and used by the Computational Structural Mechanics Testbed software system are documented by this manual. A description of each dataset including its form, contents, and organization is presented.

The computational structural mechanics testbed data library description

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1988-01-01

The datasets created and used by the Computational Structural Mechanics Testbed software system is documented by this manual. A description of each dataset including its form, contents, and organization is presented.

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

Description of textures by a structural analysis.

PubMed

Tomita, F; Shirai, Y; Tsuji, S

1982-02-01

A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.

Scalable Implementation of Finite Elements by NASA _ Implicit (ScIFEi)

NASA Technical Reports Server (NTRS)

Warner, James E.; Bomarito, Geoffrey F.; Heber, Gerd; Hochhalter, Jacob D.

2016-01-01

Scalable Implementation of Finite Elements by NASA (ScIFEN) is a parallel finite element analysis code written in C++. ScIFEN is designed to provide scalable solutions to computational mechanics problems. It supports a variety of finite element types, nonlinear material models, and boundary conditions. This report provides an overview of ScIFEi (\\Sci-Fi"), the implicit solid mechanics driver within ScIFEN. A description of ScIFEi's capabilities is provided, including an overview of the tools and features that accompany the software as well as a description of the input and output le formats. Results from several problems are included, demonstrating the efficiency and scalability of ScIFEi by comparing to finite element analysis using a commercial code.

Documentation of preventive care for pressure ulcers initiated during annual evaluations in SCI

PubMed Central

2016-01-01

Objective Community-acquired pressure ulcers (PrUs) are a frequent cause of hospitalization of Veterans with spinal cord injury (SCI). The Veterans Health Administration (VHA) recommends that SCI annual evaluations include assessment of PrU risk factors, a thorough skin inspection and sharing of recommendations for PrU prevention strategies. We characterized consistency of preventive skin care during annual evaluations for Veterans with SCI as a first step in identifying strategies to more actively promote PrU prevention care in other healthcare encounters. Design/setting/participants Retrospective cross-sectional observational design, including review of electronic medical records for 206 Veterans with SCI admitted to 2 VA SCI centers from January-December, 2011. Outcome measures Proportion of applicable skin health elements documented (number of applicable elements/skin health elements documented). Results Our sample was primarily white (78%) male (96.1%), and mean age = 61 years. 40% of participants’ were hospitalized for PrU treatment, with a mean of 294 days (median = 345 days) from annual evaluation to the index admission. On average, Veterans received an average of 75.5% (IQR 68-86%) of applicable skin health elements. Documentation of applicable skin health elements was significantly higher during inpatient vs. outpatient annual evaluations (mean elements received = 80.3% and 64.3%, respectively, P > 0.001). No significant differences were observed in documentation of skin health elements by Veterans at high vs. low PrU risk. Conclusion Additional PrU preventive care in the VHA outpatient setting may increase identification and detection of PrU risk factors and early PrU damage for Veterans with SCI in the community, allowing for earlier intervention. PMID:26763668

Strengthening the Role of Part-Time Faculty in Community Colleges. Example Job Description for Part-Time Faculty: Valencia College--Job Description and Essential Competencies

ERIC Educational Resources Information Center

Center for Community College Student Engagement, 2013

2013-01-01

In an effort to support college conversations regarding strengthening the role of part-time faculty, this brief document presents the job description for a Valencia College part-time/adjunct professor (revised as of July 19, 2013). The description includes essential functions, qualifications, and knowledge, skills, and abilities. This is followed…

Pairwise Trajectory Management (PTM): Concept Description and Documentation

NASA Technical Reports Server (NTRS)

Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

2018-01-01

Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training requirements focus group and human-in-the-loop testing activities, and the PTM Pilot Guide.

Hyper Text Mark-up Language and Dublin Core metadata element set usage in websites of Iranian State Universities' libraries.

PubMed

Zare-Farashbandi, Firoozeh; Ramezan-Shirazi, Mahtab; Ashrafi-Rizi, Hasan; Nouri, Rasool

2014-01-01

Recent progress in providing innovative solutions in the organization of electronic resources and research in this area shows a global trend in the use of new strategies such as metadata to facilitate description, place for, organization and retrieval of resources in the web environment. In this context, library metadata standards have a special place; therefore, the purpose of the present study has been a comparative study on the Central Libraries' Websites of Iran State Universities for Hyper Text Mark-up Language (HTML) and Dublin Core metadata elements usage in 2011. The method of this study is applied-descriptive and data collection tool is the check lists created by the researchers. Statistical community includes 98 websites of the Iranian State Universities of the Ministry of Health and Medical Education and Ministry of Science, Research and Technology and method of sampling is the census. Information was collected through observation and direct visits to websites and data analysis was prepared by Microsoft Excel software, 2011. The results of this study indicate that none of the websites use Dublin Core (DC) metadata and that only a few of them have used overlaps elements between HTML meta tags and Dublin Core (DC) elements. The percentage of overlaps of DC elements centralization in the Ministry of Health were 56% for both description and keywords and, in the Ministry of Science, were 45% for the keywords and 39% for the description. But, HTML meta tags have moderate presence in both Ministries, as the most-used elements were keywords and description (56%) and the least-used elements were date and formatter (0%). It was observed that the Ministry of Health and Ministry of Science follows the same path for using Dublin Core standard on their websites in the future. Because Central Library Websites are an example of scientific web pages, special attention in designing them can help the researchers to achieve faster and more accurate information resources. Therefore, the influence of librarians' ideas on the awareness of web designers and developers will be important for using metadata elements as general, and specifically for applying such standards.

Hyper Text Mark-up Language and Dublin Core metadata element set usage in websites of Iranian State Universities’ libraries

PubMed Central

Zare-Farashbandi, Firoozeh; Ramezan-Shirazi, Mahtab; Ashrafi-Rizi, Hasan; Nouri, Rasool

2014-01-01

Introduction: Recent progress in providing innovative solutions in the organization of electronic resources and research in this area shows a global trend in the use of new strategies such as metadata to facilitate description, place for, organization and retrieval of resources in the web environment. In this context, library metadata standards have a special place; therefore, the purpose of the present study has been a comparative study on the Central Libraries’ Websites of Iran State Universities for Hyper Text Mark-up Language (HTML) and Dublin Core metadata elements usage in 2011. Materials and Methods: The method of this study is applied-descriptive and data collection tool is the check lists created by the researchers. Statistical community includes 98 websites of the Iranian State Universities of the Ministry of Health and Medical Education and Ministry of Science, Research and Technology and method of sampling is the census. Information was collected through observation and direct visits to websites and data analysis was prepared by Microsoft Excel software, 2011. Results: The results of this study indicate that none of the websites use Dublin Core (DC) metadata and that only a few of them have used overlaps elements between HTML meta tags and Dublin Core (DC) elements. The percentage of overlaps of DC elements centralization in the Ministry of Health were 56% for both description and keywords and, in the Ministry of Science, were 45% for the keywords and 39% for the description. But, HTML meta tags have moderate presence in both Ministries, as the most-used elements were keywords and description (56%) and the least-used elements were date and formatter (0%). Conclusion: It was observed that the Ministry of Health and Ministry of Science follows the same path for using Dublin Core standard on their websites in the future. Because Central Library Websites are an example of scientific web pages, special attention in designing them can help the researchers to achieve faster and more accurate information resources. Therefore, the influence of librarians’ ideas on the awareness of web designers and developers will be important for using metadata elements as general, and specifically for applying such standards. PMID:24741646

Monitored Geologic Repository Project Description Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. M. Curry

2001-01-30

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

78 FR 40745 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR part 95, subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 Estimated...

Documentation and Development. Experience in Algeria

ERIC Educational Resources Information Center

Tchuigoua, J. Founou

1972-01-01

A description of the activities of the Documentation, Library and Archives Department of the Algiers Chamber of Commerce and Industry, which is run by a small staff on a modest budget, provides documentation services for the staff of the Chamber of Commerce and also assists other centers in Algeria. (Author)

Orbiter active thermal control system description

NASA Technical Reports Server (NTRS)

Laubach, G. E.

1975-01-01

A brief description of the Orbiter Active Thermal Control System (ATCS) including (1) major functional requirements of heat load, temperature control and heat sink utilization, (2) the overall system arrangement, and (3) detailed description of the elements of the ATCS.

A guideline for heavy ion radiation testing for Single Event Upset (SEU)

NASA Technical Reports Server (NTRS)

Nichols, D. K.; Price, W. E.; Malone, C.

1984-01-01

A guideline for heavy ion radiation testing for single event upset was prepared to assist new experimenters in preparing and directing tests. How to estimate parts vulnerability and select an irradiation facility is described. A broad brush description of JPL equipment is given, certain necessary pre-test procedures are outlined and the roles and testing guidelines for on-site test personnel are indicated. Detailed descriptions of equipment needed to interface with JPL test crew and equipment are not provided, nor does it meet the more generalized and broader requirements of a MIL-STD document. A detailed equipment description is available upon request, and a MIL-STD document is in the early stages of preparation.

28 CFR 20.23 - Documentation: Approval by OJARS.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

28 CFR 20.23 - Documentation: Approval by OJARS.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

28 CFR 20.23 - Documentation: Approval by OJARS.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

28 CFR 20.23 - Documentation: Approval by OJARS.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

28 CFR 20.23 - Documentation: Approval by OJARS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

Low back pain functional disability in athletes; conceptualization and initial development of a questionnaire.

PubMed

Zamani, Elham; Kordi, Ramin; Nourian, Ruhollah; Noorian, Negin; Memari, Amir Hossein; Shariati, Mohammad

2014-12-01

Low Back Pain (LBP) is one of the most prevalent causes of disability not only in the general population but also in athletes. Despite a large number of self-reported back specific disability questionnaires, there is no specific, well documented, outcome measure for athletes suffering from back pain. This study aimed to identify the main descriptive themes representing functional disability in athletes due to LBP. We conducted a qualitative study using in-depth interviews to characterize the experiences of athletes with LBP. Twenty athletes with LBP were recruited and the main descriptive elements of their LBP related disability were extracted. Then a preliminary questionnaire using these themes was proposed. The main disability indicators were pain intensity; stretching exercises, strengthening exercises, sport specific skills, back range of motion (ROM), sitting, walking, sleep patterns, self-care, and recreational activities, fear of pain and avoidance behavior, and changes in sexual activity. The findings of this study suggest that apart from non-sports items, some sport related items should be included in the assessment of LBP disability levels in athletes. Our results have also been organized as a preliminary LBP disability questionnaire for athletes.

Low Back Pain Functional Disability in Athletes; Conceptualization and Initial Development of a Questionnaire

PubMed Central

Zamani, Elham; Kordi, Ramin; Nourian, Ruhollah; Noorian, Negin; Memari, Amir Hossein; Shariati, Mohammad

2014-01-01

Background: Low Back Pain (LBP) is one of the most prevalent causes of disability not only in the general population but also in athletes. Despite a large number of self-reported back specific disability questionnaires, there is no specific, well documented, outcome measure for athletes suffering from back pain. Objectives: This study aimed to identify the main descriptive themes representing functional disability in athletes due to LBP. Patients and Methods: We conducted a qualitative study using in-depth interviews to characterize the experiences of athletes with LBP. Twenty athletes with LBP were recruited and the main descriptive elements of their LBP related disability were extracted. Then a preliminary questionnaire using these themes was proposed. Results: The main disability indicators were pain intensity; stretching exercises, strengthening exercises, sport specific skills, back range of motion (ROM), sitting, walking, sleep patterns, self-care, and recreational activities, fear of pain and avoidance behavior, and changes in sexual activity. Conclusions: The findings of this study suggest that apart from non-sports items, some sport related items should be included in the assessment of LBP disability levels in athletes. Our results have also been organized as a preliminary LBP disability questionnaire for athletes. PMID:25741417

IMP-J attitude control prelaunch analysis and operations plan

NASA Technical Reports Server (NTRS)

Hooper, H. L.; Mckendrew, J. B.; Repass, G. D.

1973-01-01

A description of the attitude control support being supplied for the Explorer 50 mission is given. Included in the document are descriptions of the computer programs being used to support attitude determination, prediction, and control for the mission and descriptions of the operating procedures that will be used to accomplish mission objectives.

The New Job Description Handbook for the School Business Office.

ERIC Educational Resources Information Center

Association of School Business Officials International, Reston, VA.

The ways in which individual school districts view and staff their business functions vary greatly. This document presents organizational charts and job descriptions of professional positions in the school-business office collected from school districts throughout the United States and Canada. Over 100 job descriptions from 50 school districts are…

Defining the Natural Atmospheric Environment Requirements for the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Roberts, Barry C.; Leahy, Frank

2008-01-01

The National Aeronautics and Space Administration began developing a new vehicle under the Constellation Program to replace the Space Shuttle. The Ares-1 launch vehicle and the Orion capsule will be used to ferry crew and some payloads to the International Space Station and will also be used for new missions to the moon, As development of this new vehicle begins, the Natural Environments Branch at Marshall Space Flight Center has been tasked with defining the natural environments the vehicle will encounter and working with the program to develop natural environmental requirements for the vehicles' elements. An overview of the structure of the program is given, along with a description of the Constellation Design Specification for Natural Environments and the Constellation Natural Environments Definition for Design documents and how they apply to the Ares-I and Orion vehicles.

Engine structures modeling software system: Computer code. User's manual

NASA Technical Reports Server (NTRS)

1992-01-01

ESMOSS is a specialized software system for the construction of geometric descriptive and discrete analytical models of engine parts, components and substructures which can be transferred to finite element analysis programs such as NASTRAN. The software architecture of ESMOSS is designed in modular form with a central executive module through which the user controls and directs the development of the analytical model. Modules consist of a geometric shape generator, a library of discretization procedures, interfacing modules to join both geometric and discrete models, a deck generator to produce input for NASTRAN and a 'recipe' processor which generates geometric models from parametric definitions. ESMOSS can be executed both in interactive and batch modes. Interactive mode is considered to be the default mode and that mode will be assumed in the discussion in this document unless stated otherwise.

The SIFT hardware/software systems. Volume 2: Software listings

NASA Technical Reports Server (NTRS)

Palumbo, Daniel L.

1985-01-01

This document contains software listings of the SIFT operating system and application software. The software is coded for the most part in a variant of the Pascal language, Pascal*. Pascal* is a cross-compiler running on the VAX and Eclipse computers. The output of Pascal* is BDX-390 assembler code. When necessary, modules are written directly in BDX-390 assembler code. The listings in this document supplement the description of the SIFT system found in Volume 1 of this report, A Detailed Description.

ENVIRONMENTAL INFORMATION MANAGEMENT SYSTEM (EIMS)

EPA Science Inventory

The Environmental Information Management System (EIMS) organizes descriptive information (metadata) for data sets, databases, documents, models, projects, and spatial data. The EIMS design provides a repository for scientific documentation that can be easily accessed with standar...

Report on architecture description for the INFLO prototype.

DOT National Transportation Integrated Search

2014-01-01

This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The intent is to ...

Rear-End Crashes: Problem Size Assessment And Statistical Description

DOT National Transportation Integrated Search

1993-05-01

KEYWORDS : RESEARCH AND DEVELOPMENT OR R&D, ADVANCED VEHICLE CONTROL & SAFETY SYSTEMS OR AVCSS, INTELLIGENT VEHICLE INITIATIVE OR IVI : THIS DOCUMENT PRESENTS PROBLEM SIZE ASSESSMENTS AND STATISTICAL CRASH DESCRIPTION FOR REAR-END CRASHES, INC...

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

DOT National Transportation Integrated Search

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

NASA Technical Reports Server (NTRS)

Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

1981-01-01

The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.

Human Research Program Requirements Document

NASA Technical Reports Server (NTRS)

Rieger, Gabe

2007-01-01

The purpose of this document is to define, document, and allocate the Human Research Program (HRP) requirements to the HRP Program elements. It establishes the flow-down of requirements from Exploration Systems Mission Directorate (ESMD) and Office of the Chief Health and Medical Officer (OCHMO) to the various Program Elements of the HRP to ensure that human research and technology countermeasure investments are made to insure the delivery of countermeasures and technologies that satisfy ESMD s and OCHMO's exploration mission requirements.

Human Research Program Requirements Document. Human Research Program Revision E

NASA Technical Reports Server (NTRS)

Vargas, Paul

2011-01-01

This document defines, documents, and allocates the Human Research Program (HRP) requirements to the HRP Program Elements. It also establishes the flow of requirements from the Human Exploration and Operations Mission Directorate (HEOMD) and the Office of the Chief Health and Medical Officer (OCHMO) down to the various HRP Program Elements to ensure that human research and technology countermeasure investments support the delivery of countermeasures and technologies that satisfy HEOMD's and OCHMO's exploration mission requirements.

Risk assessment of technologies for detecting illicit drugs in containers

NASA Astrophysics Data System (ADS)

Brandenstein, Albert E.

1995-03-01

This paper provides the highlights of the role risk assessment plays in the United States technology program for nonintrusive inspection of cargo containers for illicit drugs. The Counterdrug Technology Assessment Center is coordinating the national effort to develop prototype technologies for an advanced generation, nonintrusive cargo inspection system. In the future, the U.S. Customs Service could configure advanced technologies for finding not only drugs and other contraband hidden in cargo, but for a wide variety of commodities for customs duty verification purposes. The overall nonintrusive inspection system is envisioned to consist primarily of two classes of subsystems: (1) shipment document examination subsystems to prescreen exporter and importer documents; and (2) chemical and physics-based subsystems to detect and characterize illicit substances. The document examination subsystems would use software algorithms, artificial intelligence, and neural net technology to perform an initial prescreening of the information on the shipping manifest for suspicious patterns. This would be accomplished by creating a `profile' from the shipping information and matching it to trends known to be used by traffickers. The chemical and physics-based subsystems would apply nuclear physics, x-ray, gas chromatography and spectrometry technologies to locate and identify contraband in containers and other conveyances without the need for manual searches. The approach taken includes using technology testbeds to assist in evaluating technology prototypes and testing system concepts in a fully instrumented but realistic operational environment. This approach coupled with a substance signature phenomenology program to characterize those detectable elements of benign, as well as target substances lends itself particularly well to the topics of risk assessment and elemental characterization of substances. A technology testbed established in Tacoma, Washington provides a national facility for testing and evaluating existing and emerging prototype systems in an operational environment. The results of initial tests using the advanced x-ray subsystem installed at the testbed are given in this paper. A description of typical cargo contents and those characteristics applicable to nuclear interrogation techniques are provided in the appendix.

Measure Guideline: Heat Pump Water Heaters in New and Existing Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, C.; Puttagunta, S.; Owens, D.

2012-02-01

This Building America Measure Guideline is intended for builders, contractors, homeowners, and policy-makers. This document is intended to explore the issues surrounding heat pump water heaters (HPWHs) to ensure that homeowners and contractors have the tools needed to appropriately and efficiently install HPWHs. Heat pump water heaters (HPWHs) promise to significantly reduce energy consumption for domestic hot water (DHW) over standard electric resistance water heaters (ERWHs). While ERWHs perform with energy factors (EFs) around 0.9, new HPWHs boast EFs upwards of 2.0. High energy factors in HPWHs are achieved by combining a vapor compression system, which extracts heat from themore » surrounding air at high efficiencies, with electric resistance element(s), which are better suited to meet large hot water demands. Swapping ERWHs with HPWHs could result in roughly 50% reduction in water heating energy consumption for 35.6% of all U.S. households. This Building America Measure Guideline is intended for builders, contractors, homeowners, and policy-makers. While HPWHs promise to significantly reduce energy use for DHW, proper installation, selection, and maintenance of HPWHs is required to ensure high operating efficiency and reliability. This document is intended to explore the issues surrounding HPWHs to ensure that homeowners and contractors have the tools needed to appropriately and efficiently install HPWHs. Section 1 of this guideline provides a brief description of HPWHs and their operation. Section 2 highlights the cost and energy savings of HPWHs as well as the variables that affect HPWH performance, reliability, and efficiency. Section 3 gives guidelines for proper installation and maintenance of HPWHs, selection criteria for locating HPWHs, and highlights of important differences between ERWH and HPWH installations. Throughout this document, CARB has included results from the evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.« less

Design of Software for Design of Finite Element for Structural Analysis. Ph.D. Thesis - Stuttgart Univ., 22 Nov. 1983

NASA Technical Reports Server (NTRS)

Helfrich, Reinhard

1987-01-01

The concepts of software engineering which allow a user of the finite element method to describe a model, to collect and to check the model data in a data base as well as to form the matrices required for a finite element calculation are examined. Next the components of the model description are conceived including the mesh tree, the topology, the configuration, the kinematic boundary conditions, the data for each element, and the loads. The possibilities for description and review of the data are considered. The concept of the segments for the modularization of the programs follows the components of the model description. The significance of the mesh tree as a globular guiding structure will be understood in view of the principle of the unity of the model, the mesh tree, and the data base. The user-friendly aspects of the software system will be summarized: the principle of language communication, the data generators, error processing, and data security.

SGML and HTML: The Merging of Document Management and Electronic Document Publishing.

ERIC Educational Resources Information Center

Dixon, Ross

1996-01-01

Document control is an issue for organizations that use SGML/HTML. The prevalent approach is to apply the same techniques to document elements that are applied to full documents, a practice that has led to an overlap of electronic publishing and document management. Lists requirements for the management of SGML/HTML documents. (PEN)

Evapotranspiration information reporting: II. Recommended documentation

USDA-ARS?s Scientific Manuscript database

Researchers and journal authors, reviewers, and readers can benefit from more complete documentation of published evapotranspiration (ET) information, including a description of field procedures, instrumentation, data filtering, model parameterization, and site review. This information is important ...

The Immersion Effect

DTIC Science & Technology

2016-12-01

C.   METHODOLOGY ....................................................................................4 D.   LITERATURE REVIEW... Descriptions ................................................10 Table 3.   Interagency Language Roundtable Language Skill Level Table 4. Descriptions ...and cultural acquisition. METHODOLOGY D. In this project the author analyzed official documents associated with Military Information Support

Developing Your Employee Handbook: Job Descriptions.

ERIC Educational Resources Information Center

Perreault, Joe

1988-01-01

A job description is a brief document that conveys to employees the importance of their jobs to the overall success of the day-care center. If properly written, it can contribute to effective employee motivation and supervision. (RJC)

NASTRAN hydroelastic modal studies. Volume 2: Programmer documentation

NASA Technical Reports Server (NTRS)

1977-01-01

The operational steps, data descriptions, and program code for the new NASTRAN hydroelastic analysis system are described. The overall flow of the system is described, followed by the descriptions of the individual modules and their subroutines.

78 FR 37819 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR Part 95, Subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 [[Page 37820...

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.F. Beesley

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative designmore » process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.« less

Document Set Differentiability Analyzer v. 0.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osborn, Thor D.

Software is a JMP Scripting Language (JSL) script designed to evaluate the differentiability of a set of documents that exhibit some conceptual commonalities but are expected to describe substantially different – thus differentiable – categories. The script imports the document set, a subset of which may be partitioned into an additions pool. The bulk of the documents form a basis pool. Text analysis is applied to the basis pool to extract a mathematical representation of its conceptual content, referred to as the document concept space. A bootstrapping approach is applied to that mathematical representation in order to generate a representationmore » of a large population of randomly designed documents that could be written within the concept space, notably without actually writing the text of those documents.The Kolmogorov-Smirnov test is applied to determine whether the basis pool document set exhibits superior differentiation relative to the randomly designed virtual documents produced by bootstrapping. If an additions pool exists, the documents are incrementally added to the basis pool, choosing the best differentiated remaining document at each step. In this manner the impact of additional categories to overall document set differentiability may be assessed.The software was developed to assess the differentiability of job description document sets. Differentiability is key to meaningful categorization. Poor job differentiation may have economic, ethical, and/or legal implications for an organization. Job categories are used in the assignment of market-based salaries; consequently, poor differentiation of job duties may set the stage for legal challenges if very similar jobs pay differently depending on title, a circumstance that also invites economic waste.The software can be applied to ensure job description set differentiability, reducing legal, economic, and ethical risks to an organization and its people. The extraction of the conceptual space to a mathematical representation enables identification of exceedingly similar documents. In the event of redundancy, two jobs may be collapsed into one. If in the judgment of the subject matter experts the jobs are truly different, the conceptual similarities are highlighted, inviting inclusion of appropriate descriptive content to explicitly characterize those differences. When additional job categories may be needed as the organization changes, the software enables evaluation of proposed additions to ensure that the resulting document set remains adequately differentiated.« less

Finite-element three-dimensional ground-water (FE3DGW) flow model - formulation, program listings and users' manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, S.K.; Cole, C.R.; Bond, F.W.

1979-12-01

The Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Program is developing and applying the methodology for assessing the far-field, long-term post-closure safety of deep geologic nuclear waste repositories. AEGIS is being performed by Pacific Northwest Laboratory (PNL) under contract with the Office of Nuclear Waste Isolation (OWNI) for the Department of Energy (DOE). One task within AEGIS is the development of methodology for analysis of the consequences (water pathway) from loss of repository containment as defined by various release scenarios. Analysis of the long-term, far-field consequences of release scenarios requires the application of numerical codes which simulate the hydrologicmore » systems, model the transport of released radionuclides through the hydrologic systems to the biosphere, and, where applicable, assess the radiological dose to humans. Hydrologic and transport models are available at several levels of complexity or sophistication. Model selection and use are determined by the quantity and quality of input data. Model development under AEGIS and related programs provides three levels of hydrologic models, two levels of transport models, and one level of dose models (with several separate models). This document consists of the description of the FE3DGW (Finite Element, Three-Dimensional Groundwater) Hydrologic model third level (high complexity) three-dimensional, finite element approach (Galerkin formulation) for saturated groundwater flow.« less

Wikisearching and Wikilinking

NASA Astrophysics Data System (ADS)

Jenkinson, Dylan; Leung, Kai-Cheung; Trotman, Andrew

The University of Otago submitted three element runs and three passage runs to the Relevance-in-Context task of the ad hoc track. The best Otago run was a whole-document run placing 7th. The best Otago passage run placed 13th while the best Otago element run placed 31st. There were a total of 40 runs submitted to the task. The ad hoc result reinforced our prior belief that passages are better answers than elements and that the most important aspect of the focused retrieval is the identification of relevant documents. Six runs were submitted to the Link-the-Wiki track. The best Otago run placed 1st (of 21) in file to file automatic assessment and 6th (of 28) with manual assessment. The Itakura & Clarke algorithm was used for outgoing links, with special attention paid to parsing and case sensitivity. For incoming links representative terms were selected from the document and used to find similar documents.

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

NASA Technical Reports Server (NTRS)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 2: Framework process description

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paula S.; Crump, John W.; Ackley, Keith A.

1992-01-01

In the second volume of the Demonstration Framework Document, the graphical representation of the demonstration framework is given. This second document was created to facilitate the reading and comprehension of the demonstration framework. It is designed to be viewed in parallel with Section 4.2 of the first volume to help give a picture of the relationships between the UOB's (Unit of Behavior) of the model. The model is quite large and the design team felt that this form of presentation would make it easier for the reader to get a feel for the processes described in this document. The IDEF3 (Process Description Capture Method) diagrams of the processes of an Information System Development are presented. Volume 1 describes the processes and the agents involved with each process, while this volume graphically shows the precedence relationships among the processes.

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

A system for aerodynamic design and analysis of supersonic aircraft. Part 3: Computer program description

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1980-01-01

The computer program documentation for the design and analysis of supersonic configurations is presented. Schematics and block diagrams of the major program structure, together with subroutine descriptions for each module are included.

A programmable laboratory testbed in support of evaluation of functional brain activation and connectivity.

PubMed

Barbour, Randall L; Graber, Harry L; Xu, Yong; Pei, Yaling; Schmitz, Christoph H; Pfeil, Douglas S; Tyagi, Anandita; Andronica, Randy; Lee, Daniel C; Barbour, San-Lian S; Nichols, J David; Pflieger, Mark E

2012-03-01

An important determinant of the value of quantitative neuroimaging studies is the reliability of the derived information, which is a function of the data collection conditions. Near infrared spectroscopy (NIRS) and electroencelphalography are independent sensing domains that are well suited to explore principal elements of the brain's response to neuroactivation, and whose integration supports development of compact, even wearable, systems suitable for use in open environments. In an effort to maximize the translatability and utility of such resources, we have established an experimental laboratory testbed that supports measures and analysis of simulated macroscopic bioelectric and hemodynamic responses of the brain. Principal elements of the testbed include 1) a programmable anthropomorphic head phantom containing a multisignal source array embedded within a matrix that approximates the background optical and bioelectric properties of the brain, 2) integrated translatable headgear that support multimodal studies, and 3) an integrated data analysis environment that supports anatomically based mapping of experiment-derived measures that are directly and not directly observable. Here, we present a description of system components and fabrication, an overview of the analysis environment, and findings from a representative study that document the ability to experimentally validate effective connectivity models based on NIRS tomography.

Complex socio-technical systems: Characterization and management guidelines.

PubMed

Righi, Angela Weber; Saurin, Tarcisio Abreu

2015-09-01

Although ergonomics has paid increasing attention to the perspective of complexity, methods for its operationalization are scarce. This study introduces a framework for the operationalization of the "attribute view" of complexity, which involves: (i) the delimitation of the socio-technical system (STS); (ii) the description of four complexity attributes, namely a large number of elements in dynamic interactions, a wide diversity of elements, unexpected variability, and resilience; (iii) the assessment of six management guidelines, namely design slack, give visibility to processes and outcomes, anticipate and monitor the impacts of small changes, monitor the gap between prescription and practice, encourage diversity of perspectives when making decisions, and create an environment that supports resilience; and (iv) the identification of leverage points for improving the STS design, based on both the analysis of relationships among the attributes and their classification as irreducible/manageable complexity, and liability/asset. The use of the framework is illustrated by the study of an emergency department of a University hospital. Data collection involved analysis of documents, observations of work at the front-line, interviews with employees, and the application of questionnaires. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 6: Primary nozzle diffuser analysis

NASA Technical Reports Server (NTRS)

Foley, Michael J.

1989-01-01

The primary nozzle diffuser routes fuel from the main fuel valve on the Space Shuttle Main Engine (SSME) to the nozzle coolant inlet mainfold, main combustion chamber coolant inlet mainfold, chamber coolant valve, and the augmented spark igniters. The diffuser also includes the fuel system purge check valve connection. A static stress analysis was performed on the diffuser because no detailed analysis was done on this part in the past. Structural concerns were in the area of the welds because approximately 10 percent are in areas inaccessible by X-ray testing devices. Flow dynamics and thermodynamics were not included in the analysis load case. Constant internal pressure at maximum SSME power was used instead. A three-dimensional, finite element method was generated using ANSYS version 4.3A on the Lockheed VAX 11/785 computer to perform the stress computations. IDEAS Supertab on a Sun 3/60 computer was used to create the finite element model. Rocketdyne drawing number RS009156 was used for the model interpretation. The flight diffuser is denoted as -101. A description of the model, boundary conditions/load case, material properties, structural analysis/results, and a summary are included for documentation.

Residential Energy Consumption Survey (RECS): Household screener survey, 1979-1980, household characteristics and annualized consumption

NASA Astrophysics Data System (ADS)

Windell, P.

1981-08-01

This document provides basic information and technical specifications necessary for using the machine-readable magnetic tape containing data from the Household Screener Survey of the Residential Energy Consumption Survey (RECS). Included in this document are an overview of the RECS and a brief description of the Household Screener Survey. The next section contains technical specifications for reading the tape and descriptions of the contents of each of the files contained on the tape. The remaining four sections are devoted to technical topics of special interest to users of the data. Appended to this document are copies of the fieldwork instruments used in the survey and a listing of the contents of a portion of the SPSS labels information.

Assurance specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 4

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fourth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for assurance documentation for information systems and software, hardware, and operational procedures components, and related processes. The specifications are developed in conjunction with the corresponding management plans specifying the assurance activities to be performed.

Mexico: Centro de Documentacion e Informacion Educativa. Seminario de Documentacion e Informacion Pedagogica en America Latina (The Mexican Center for Educational Documentation and Information. Working Paper for the Seminar on Educational Documentation and Information in Latin America).

ERIC Educational Resources Information Center

Secretaria de Educacion Publica, Mexico City (Mexico). Centro de Documentacion e Informacion Educativa.

This document describes the Center for Documentation and Educational Information in Mexico City. Background information on similar services in Mexico is provided and a detailed description of the Center is presented, covering organization, objectives, administration, users, activities, services, and publications. (VM)

Airspace Technology Demonstration 2 (ATD-2) Technology Description Document (TDD)

NASA Technical Reports Server (NTRS)

Ging, Andrew; Engelland, Shawn; Capps, Al; Eshow, Michelle; Jung, Yoon; Sharma, Shivanjli; Talebi, Ehsan; Downs, Michael; Freedman, Cynthia; Ngo, Tyler;

Slave finite elements for nonlinear analysis of engine structures, volume 1

NASA Technical Reports Server (NTRS)

Gellin, S.

1991-01-01

A 336 degrees of freedom slave finite element processing capability to analyze engine structures under severe thermomechanical loading is presented. Description of the theoretical development and demonstration of that element is presented in this volume.

Assessing written communication during interhospital transfers of emergency general surgery patients.

PubMed

Harl, Felicity N R; Saucke, Megan C; Greenberg, Caprice C; Ingraham, Angela M

2017-06-15

Poor communication causes fragmented care. Studies of transitions of care within a hospital and on discharge suggest significant communication deficits. Communication during transfers between hospitals has not been well studied. We assessed the written communication provided during interhospital transfers of emergency general surgery patients. We hypothesized that patients are transferred with incomplete documentation from referring facilities. We performed a retrospective review of written communication provided during interhospital transfers to our emergency department (ED) from referring EDs for emergency general surgical evaluation between January 1, 2014 and January 1, 2016. Elements of written communication were abstracted from referring facility documents scanned into the medical record using a standardized abstraction protocol. Descriptive statistics summarized the information communicated. A total of 129 patients met inclusion criteria. 87.6% (n = 113) of charts contained referring hospital documents. 42.5% (n = 48) were missing history and physicals. Diagnoses were missing in 9.7% (n = 11). Ninety-one computed tomography scans were performed; among 70 with reads, final reads were absent for 70.0% (n = 49). 45 ultrasounds and x-rays were performed; among 27 with reads, final reads were missing for 80.0% (n = 36). Reasons for transfer were missing in 18.6% (n = 21). Referring hospital physicians outside the ED were consulted in 32.7% (n = 37); consultants' notes were absent in 89.2% (n = 33). In 12.4% (n = 14), referring documents arrived after the patient's ED arrival and were not part of the original documentation provided. This study documents that information important to patient care is often missing in the written communication provided during interhospital transfers. This gap affords a foundation for standardizing provider communication during interhospital transfers. Copyright © 2017 Elsevier Inc. All rights reserved.

User Manual for the AZ-101 Data Acquisition System (AS-101 DAS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRAYTON, D.D.

2000-02-17

User manual for the TK AZ-101 Waste Retrieval System Data Acquisition System. The purpose of this document is to describe use of the AZ-101 Data Acquisition System (AZ-101 DAS). The AZ-101 DAS is provided to fulfill the requirements for data collection and monitoring as defined in Letters of Instruction (LOI) from Numatec Hanford Corporation (NHC) to Fluor Federal Services (FFS). For a complete description of the system, including design, please refer to the AZ-101 DAS System Description document, RPP-5572.

Referenced-site environmental document for a Monitored Retrievable Storage facility: backup waste management option for handling 1800 MTU per year

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silviera, D.J.; Aaberg, R.L.; Cushing, C.E.

This environmental document includes a discussion of the purpose of a monitored retrievable storage facility, a description of two facility design concepts (sealed storage cask and field drywell), a description of three reference sites (arid, warm-wet, and cold-wet), and a discussion and comparison of the impacts associated with each of the six site/concept combinations. This analysis is based on a 15,000-MTU storage capacity and a throughput rate of up to 1800 MTU per year.

Toxic elements and associations with hematology, plasma biochemistry, and protein electrophoresis in nesting loggerhead sea turtles (Caretta caretta) from Casey Key, Florida.

PubMed

Perrault, Justin R; Stacy, Nicole I; Lehner, Andreas F; Poor, Savannah K; Buchweitz, John P; Walsh, Catherine J

2017-12-01

Toxic elements (arsenic, cadmium, lead, mercury, selenium, thallium) are a group of contaminants that are known to elicit developmental, reproductive, general health, and immune system effects in reptiles, even at low concentrations. Reptiles, including marine turtles, are susceptible to accumulation of toxic elements due to their long life span, low metabolic rate, and highly efficient conversion of prey into biomass. The objectives of this study were to (1) document concentrations of arsenic, cadmium, lead, mercury, selenium, and thallium in whole blood and keratin from nesting loggerhead sea turtles (Caretta caretta) from Casey Key, Florida and document correlations thereof and (2) correlate whole blood toxic element concentrations to various hematological and plasma biochemistry analytes. Baselines for various hematological and plasma analytes and toxic elements in whole blood and keratin (i.e., scute) in nesting loggerheads are documented. Various correlations between the toxic elements and hematological and plasma biochemistry analytes were identified; however, the most intriguing were negative correlations between arsenic, cadmium, lead, and selenium with and α- and γ-globulins. Although various extrinsic and intrinsic variables such as dietary and feeding changes in nesting loggerheads need to be considered, this finding may suggest a link to altered humoral immunity. This study documents a suite of health variables of nesting loggerheads in correlation to contaminants and identifies the potential of toxic elements to impact the overall health of nesting turtles, thus presenting important implications for the conservation and management of this species. Copyright © 2017 Elsevier Ltd. All rights reserved.

Information System Life-Cycle And Documentation Standards (SMAP DIDS)

NASA Technical Reports Server (NTRS)

1990-01-01

Although not computer program, SMAP DIDS written to provide systematic, NASA-wide structure for documenting information system development projects. Each DID (data item description) outlines document required for top-quality software development. When combined with management, assurance, and life cycle standards, Standards protect all parties who participate in design and operation of new information system.

Vulnerability Analyst’s Guide to Geometric Target Description

DTIC Science & Technology

1992-09-01

not constitute indorsement of any commercial product. Form Approved REPORT DOCUMENTATION PAGE OMB No. 0704-O,8 public reporting burden for this...46 5.3 Surrogacy ..............................................46 5.4 Specialized Targets......................................46 5.5... commercially available documents for other large-scale software. The documentation is not a BRL technical report, but can be obtained by contacting

Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

29 CFR 2700.105 - Disclosure of information by the Parties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...

29 CFR 2700.105 - Disclosure of information by the Parties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...

29 CFR 2700.105 - Disclosure of information by the Parties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...

Technical Assistance and Training from the Document Design Project. Final Report.

ERIC Educational Resources Information Center

American Institutes for Research, Washington, DC.

Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Using Administrative Data for Research: A Companion Guide to "A Descriptive Analysis of the Principal Workforce in Florida Schools." REL 2015-049

ERIC Educational Resources Information Center

Folsom, Jessica Sidler; Osborne-Lampkin, La'Tara; Herrington, Carolyn D.

2014-01-01

This document is a companion guide to "A Descriptive Analysis of the Principal Workforce in Florida Schools" (Folsom, Osborne-Lampkin, & Herrington, in press). It describes the methods used to extract information from the Florida Department of Education database in order to conduct a descriptive analysis of the demographic…

Ballistic Missile Defense System (BMDS)

DTIC Science & Technology

2015-12-01

Assessment and Program Evaluation CARD - Cost Analysis Requirements Description CDD - Capability Development Document CLIN - Contract Line Item Number CPD...Estimate RDT&E - Research, Development, Test, and Evaluation SAR - Selected Acquisition Report SCP - Service Cost Position TBD - To Be Determined TY - Then...BMDS December 2015 SAR March 23, 2016 16:29:09 UNCLASSIFIED 5 Mission and Description Mission and Description To develop, test, and field a layered

Event-driven management algorithm of an Engineering documents circulation system

NASA Astrophysics Data System (ADS)

Kuzenkov, V.; Zebzeev, A.; Gromakov, E.

2015-04-01

Development methodology of an engineering documents circulation system in the design company is reviewed. Discrete event-driven automatic models using description algorithms of project management is offered. Petri net use for dynamic design of projects is offered.

Airport Landside. Volume II. The Airport Landside Simulation Model (ALSIM) Description and Users Guide.

DOT National Transportation Integrated Search

1982-06-01

This volume provides a general description of the Airport Landside Simulation Model. A summary of simulated passenger and vehicular processing through the landside is presented. Program operating characteristics and assumptions are documented and a c...

Enhanced Traffic Management System (ETMS) : functional description, version 5.0

DOT National Transportation Integrated Search

1995-06-30

This document is a functional description of Version 5.0 of the Enhanced Traffic : Management System (ETMS). The ETMSis an automation system for supporting the : strategic management of air traffic. The ETMS is being developed and maintained in : con...

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Integrated learning in practical machine element design course: a case study of V-pulley design

NASA Astrophysics Data System (ADS)

Tantrabandit, Manop

2014-06-01

To achieve an effective integrated learning in Machine Element Design course, it is of importance to bridge the basic knowledge and skills of element designs. The multiple core learning leads the pathway which consists of two main parts. The first part involves teaching documents of which the contents are number of V-groove formulae, standard of V-grooved pulleys, and parallel key dimension's formulae. The second part relates to the subjects that the students have studied prior to participating in this integrated learning course, namely Material Selection, Manufacturing Process, Applied Engineering Drawing, CAD (Computer Aided Design) animation software. Moreover, an intensive cooperation between a lecturer and students is another key factor to fulfill the success of integrated learning. Last but not least, the students need to share their knowledge within the group and among the other groups aiming to gain knowledge of and skills in 1) the application of CAD-software to build up manufacture part drawings, 2) assembly drawing, 3) simulation to verify the strength of loaded pulley by method of Finite Element Analysis (FEA), 4) the software to create animation of mounting and dismounting of a pulley to a shaft, and 5) an instruction manual. The end product of this integrated learning, as a result of the above 1 to 5 knowledge and skills obtained, the participating students can create an assembly derived from manufacture part drawings and a video presentation with bilingual (English-Thai) audio description of Vpulley with datum diameter of 250 mm, 4 grooves, and type of groove: SPA.

76 FR 68117 - Video Description: Implementation of the Twenty-First Century Communications and Video...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Parts 79 [MB Docket No. 11-43; FCC 11-126] Video Description: Implementation of the Twenty-First Century Communications and Video Accessibility Act of 2010... implementation of the Video Description elements of the Twenty-First Century Communications and Video...

Medical encounters and exchange in early Canadian missions.

PubMed

Parsons, Chris

2008-01-01

The exchange of medical and pharmaceutical knowledge was an important facet of the encounter between native and newcomer in early Canada. Throughout New France Récollet and Jesuit missionaries were given privileged access both to indigenous peoples and indigenous plants. Curiously, however, when it came to describing medical treatments, it was people, rather than medicinal plants, that were targets of what might be called "the descriptive enterprise." Attempting to divide suspect shamanic remedies from those deemed natural, missionary observers carefully documented the context of medical treatments rather than simply the specific remedy applied for treatment. Using records left by early Canadian missionaries this paper will look at the peculiar character of medical exchange in the missions of seventeenth and eighteenth-century New France to look at the interpersonal encounters that formed a constitutive element of colonial botany and framed the way in which indigenous knowledge was represented to metropolitan audiences.

Perform - A performance optimizing computer program for dynamic systems subject to transient loadings

NASA Technical Reports Server (NTRS)

Pilkey, W. D.; Wang, B. P.; Yoo, Y.; Clark, B.

1973-01-01

A description and applications of a computer capability for determining the ultimate optimal behavior of a dynamically loaded structural-mechanical system are presented. This capability provides characteristics of the theoretically best, or limiting, design concept according to response criteria dictated by design requirements. Equations of motion of the system in first or second order form include incompletely specified elements whose characteristics are determined in the optimization of one or more performance indices subject to the response criteria in the form of constraints. The system is subject to deterministic transient inputs, and the computer capability is designed to operate with a large linear programming on-the-shelf software package which performs the desired optimization. The report contains user-oriented program documentation in engineering, problem-oriented form. Applications cover a wide variety of dynamics problems including those associated with such diverse configurations as a missile-silo system, impacting freight cars, and an aircraft ride control system.

PEBBLE: a two-dimensional steady-state pebble bed reactor thermal hydraulics code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vondy, D.R.

1981-09-01

This report documents the local implementation of the PEBBLE code to treat the two-dimensional steady-state pebble bed reactor thermal hydraulics problem. This code is implemented as a module of a computation system used for reactor core history calculations. Given power density data, the geometric description in (RZ), and basic heat removal conditions and thermal properties, the coolant properties, flow conditions, and temperature distributions in the pebble fuel elements are predicted. The calculation is oriented to the continuous fueling, steady state condition with consideration of the effect of the high energy neutron flux exposure and temperature history on the thermal conductivity.more » The coolant flow conditions are calculated for the same geometry as used in the neutronics calculation, power density and fluence data being used directly, and temperature results are made available for subsequent use.« less

Executive overview and introduction to the SMAP information system life-cycle and documentation standards

NASA Technical Reports Server (NTRS)

1989-01-01

An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

Description and Evaluation of a Four-Channel, Coherent 100-kHz Sidescan Sonar

DTIC Science & Technology

2004-12-01

document contains color images. 14. ABSTRACT This report documents the design and features of a new, four-channel, coherent 100-kHz sidescan sonar...Atlantic Technical Memorandum DRDC Atlantic TM 2004-204 December 2004 Abstract This report documents the design and features of a new...Results This report documents the design and features of this new high-frequency sonar system. These initial field trial results demonstrate some of

Overcoming the fragility - X-ray computed micro-tomography elucidates brachiopod endoskeletons.

PubMed

Seidel, Ronald; Lüter, Carsten

2014-01-01

The calcareous shells of brachiopods offer a wealth of informative characters for taxonomic and phylogenetic investigations. In particular scanning electron microscopy (SEM) has been used for decades to visualise internal structures of the shell. However, to produce informative SEM data, brachiopod shells need to be opened after chemical removal of the soft tissue. This preparation occasionally damages the shell. Additionally, skeletal elements of taxonomic/systematic interest such as calcareous spicules which are loosely embedded in the lophophore and mantle connective tissue become disintegrated during the preparation process. Using a nondestructive micro-computed tomography (μCT) approach, the entire fragile endoskeleton of brachiopods is documented for the first time. New insights on the structure and position of tissue-bound skeletal elements (spicules) are given as add ons to existing descriptions of brachiopod shell anatomy, thereby enhancing the quality and quantity of informative characters needed for both taxonomic and phylogenetic studies. Here, we present five modern, articulated brachiopods (Rectocalathis schemmgregoryi n. gen., n. sp., Eucalathis sp., Gryphus vitreus, Liothyrella neozelanica and Terebratulina retusa) that were X-rayed using a Phoenix Nanotom XS 180 NF. We provide links to download 3D models of these species, and additional five species with spicules can be accessed in the Supplemental Material. In total, 17 brachiopod genera covering all modern articulated subgroups and 2 inarticulated genera were X-rayed for morphological analysis. Rectocalathis schemmgregoryi n. gen., n. sp. is fully described. Micro-CT is an excellent non-destructive tool for investigating calcified structures in the exo- and endoskeletons of brachiopods. With high quality images and interactive 3D models, this study provides a comprehensive description of the profound differences in shell anatomy, facilitates the detection of new delicate morphological characters of the endoskeleton and gives new insights into the body plan of modern brachiopods.

AgRISTARS: Foreign commodity production forecasting. Project test reports document, volume 1. [using North Dakota, South Dakota, Montana, and Minnesota

NASA Technical Reports Server (NTRS)

Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

1981-01-01

Foreign Commodity Production Forecasting testing activities through June 1981 are documented. A log of test reports is presented. Standard documentation sets are included for each test. The documentation elements presented in each set are summarized.

Document segmentation via oblique cuts

NASA Astrophysics Data System (ADS)

Svendsen, Jeremy; Branzan-Albu, Alexandra

2013-01-01

This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system

NASA Technical Reports Server (NTRS)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Astronomical catalog desk reference, 1994 edition

NASA Technical Reports Server (NTRS)

1994-01-01

The Astronomical Catalog Desk Reference is designed to aid astronomers in locating machine readable catalogs in the Astronomical Data Center (ADC) archives. The key reference components of this document are as follows: A listing of shortened titles for all catalogs available from the ADC (includes the name of the lead author and year of publication), brief descriptions of over 300 astronomical catalogs, an index of ADC catalog numbers by subject keyword, and an index of ADC catalog numbers by author. The heart of this document is the set of brief descriptions generated by the ADC staff. The 1994 edition of the Astronomical Catalog Desk Reference contains descriptions for over one third of the catalogs in the ADC archives. Readers are encouraged to refer to this section for concise summaries of those catalogs and their contents.

Single-channel voice-response-system program documentation volume I : system description

DOT National Transportation Integrated Search

1977-01-01

This report documents the design and implementation of a Voice Response System (VRS) using Adaptive Differential Pulse Code Modulation (ADPCM) voice coding. Implemented on a Digital Equipment Corporation PDP-11/20,R this VRS system supports a single ...

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Preliminary design review report - sludge offload system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwethy, L.M. Westinghouse Hanford

1996-06-05

This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.

Advanced Interval Management (IM) Concepts of Operations

NASA Technical Reports Server (NTRS)

Barmore, Bryan E.; Ahmad, Nash'at N.; Underwood, Matthew C.

2014-01-01

This document provides a high-level description of several advanced IM operations that NASA is considering for future research and development. It covers two versions of IM-CSPO and IM with Wake Mitigation. These are preliminary descriptions to support an initial benefits analysis

41 CFR Appendix C to Chapter 301 - Standard Data Elements for Federal Travel [Traveler Identification

Code of Federal Regulations, 2014 CFR

2014-07-01

... education, in scientific, professional, technical, mechanical, trade, clerical, fiscal, administrative, or... Data Elements for Federal Travel [Accounting & Certification] Group name Data elements Description Accounting Classification Accounting Code Agency accounting code. Non-Federal Source Indicator Per Diem...

77 FR 37471 - National Automotive Sampling System

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... a comprehensive review of the National Automotive Sampling System (NASS) research design and data... comment on the current data elements, propose new data elements, make suggestions on the research design... should consider to improve crash data. Current NASS data elements, coding instructions, and descriptive...

Improving the Document Development Process: Integrating Relational Data and Statistical Process Control.

ERIC Educational Resources Information Center

Miller, John

1994-01-01

Presents an approach to document numbering, document titling, and process measurement which, when used with fundamental techniques of statistical process control, reveals meaningful process-element variation as well as nominal productivity models. (SR)

The Forest Inventory and Analysis Database: Database description and users manual version 4.0 for Phase 2

Treesearch

Sharon W. Woudenberg; Barbara L. Conkling; Barbara M. O' Connell; Elizabeth B. LaPoint; Jeffery A. Turner; Karen L. Waddell

2010-01-01

This document is based on previous documentation of the nationally standardized Forest Inventory and Analysis database (Hansen and others 1992; Woudenberg and Farrenkopf 1995; Miles and others 2001). Documentation of the structure of the Forest Inventory and Analysis database (FIADB) for Phase 2 data, as well as codes and definitions, is provided. Examples for...

IDC System Specification Document Version 1.1.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, James M.; Lober, Randall R.

2015-02-01

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

Computer Description of Black Hawk Helicopter

DTIC Science & Technology

1979-06-01

Model Combinatorial Geometry Models Black Hawk Helicopter Helicopter GIFT Computer Code Geometric Description of Targets 20. ABSTRACT...description was made using the technique of combinatorial geometry (COM-GEOM) and will be used as input to the GIFT computer code which generates Tliic...rnHp The data used bv the COVART comtmter code was eenerated bv the Geometric Information for Targets ( GIFT )Z computer code. This report documents

Realtime Knowledge Management (RKM): From an International Space Station (ISS) Point of View

NASA Technical Reports Server (NTRS)

Robinson, Peter I.; McDermott, William; Alena, Richard L.

2004-01-01

We are developing automated methods to provide realtime access to spacecraft domain knowledge relevant a spacecraft's current operational state. The method is based upon analyzing state-transition signatures in the telemetry stream. A key insight is that documentation relevant to a specific failure mode or operational state is related to the structure and function of spacecraft systems. This means that diagnostic dependency and state models can provide a roadmap for effective documentation navigation and presentation. Diagnostic models consume the telemetry and derive a high-level state description of the spacecraft. Each potential spacecraft state description is matched against the predictions of models that were developed from information found in the pages and sections in the relevant International Space Station (ISS) documentation and reference materials. By annotating each model fragment with the domain knowledge sources from which it was derived we can develop a system that automatically selects those documents representing the domain knowledge encapsulated by the models that compute the current spacecraft state. In this manner, when the spacecraft state changes, the relevant documentation context and presentation will also change.

Slave finite element for non-linear analysis of engine structures. Volume 2: Programmer's manual and user's manual

NASA Technical Reports Server (NTRS)

Witkop, D. L.; Dale, B. J.; Gellin, S.

1991-01-01

The programming aspects of SFENES are described in the User's Manual. The information presented is provided for the installation programmer. It is sufficient to fully describe the general program logic and required peripheral storage. All element generated data is stored externally to reduce required memory allocation. A separate section is devoted to the description of these files thereby permitting the optimization of Input/Output (I/O) time through efficient buffer descriptions. Individual subroutine descriptions are presented along with the complete Fortran source listings. A short description of the major control, computation, and I/O phases is included to aid in obtaining an overall familiarity with the program's components. Finally, a discussion of the suggested overlay structure which allows the program to execute with a reasonable amount of memory allocation is presented.

1 CFR 20.4 - Description of program activities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS § 20.4...

76 FR 24437 - Structure and Practices of the Video Relay Service Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... applicant, a description of the applicant's organizational structure, including the names of its executives... Internet-based relay service, including documentation on loans for equipment, inventory, property... over the applicant, a description of the applicant's organizational structure, and the names of its...

76 FR 57989 - Video Programming and Accessibility Advisory Committee; Announcement of Date of Next Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... FEDERAL COMMUNICATIONS COMMISSION [DA 11-1527] Video Programming and Accessibility Advisory.... SUMMARY: This document announces the next meeting of the Video Programming Accessibility Advisory... Commission regarding video description, and the delivery of video description, access to emergency...

Structural Acoustic Physics Based Modeling of Curved Composite Shells

DTIC Science & Technology

2017-09-19

Results show that the finite element computational models accurately match analytical calculations, and that the composite material studied in this...products. 15. SUBJECT TERMS Finite Element Analysis, Structural Acoustics, Fiber-Reinforced Composites, Physics-Based Modeling 16. SECURITY...2 4 FINITE ELEMENT MODEL DESCRIPTION

Hanford Site Groundwater Protection Management Program: Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Groundwater protection is a national priority that is promulgated in a variety of environmental regulations at local, state, and federal levels. To effectively coordinate and ensure compliance with applicable regulations, the US Department of Energy has issued DOE Order 5400.1 (now under revision) that requires all US Department of Energy facilities to prepare separate groundwater protection program descriptions and plans. This document describes the Groundwater Protection Management Program for the Hanford Site located in the state of Washington. DOE Order 5400.1 specifies that the Groundwater Protection Management Program cover the following general topical areas: (1) documentation of the groundwater regime,more » (2) design and implementation of a groundwater monitoring program to support resource management and comply with applicable laws and regulations, (3) a management program for groundwater protection and remediation, (4) a summary and identification of areas that may be contaminated with hazardous waste, (5) strategies for controlling these sources, (6) a remedial action program, and (7) decontamination and decommissioning and related remedial action requirements. Many of the above elements are covered by existing programs at the Hanford Site; thus, one of the primary purposes of this document is to provide a framework for coordination of existing groundwater protection activities. Additionally, it describes how information needs are identified and can be incorporated into existing or proposed new programs. The Groundwater Protection Management Program provides the general scope, philosophy, and strategies for groundwater protection/management at the Hanford Site. Subtier documents provide the detailed plans for implementing groundwater-related activities and programs. Related schedule and budget information are provided in the 5-year plan for environmental restoration and waste management at the Hanford Site.« less

Nystagmus Assessments Documented by Emergency Physicians in Acute Dizziness Presentations: A Target for Decision Support?

PubMed Central

Kerber, Kevin A.; Morgenstern, Lewis B.; Meurer, William J.; McLaughlin, Thomas; Hall, Pamela A.; Forman, Jane; Fendrick, A. Mark; Newman-Toker, David E.

2011-01-01

Objectives Dizziness is a common presenting complaint to the emergency department (ED), and emergency physicians (EPs) consider these presentations a priority for decision support. Assessing for nystagmus and defining its features are important steps for any acute dizziness decision algorithm. The authors sought to describe nystagmus documentation in routine ED care to determine if nystagmus assessments might be an important target in decision support efforts. Methods Medical records from ED visits for dizziness were captured as part of a surveillance study embedded within an ongoing population-based cohort study. Visits with documentation of a nystagmus assessment were reviewed and coded for presence or absence of nystagmus, ability to draw a meaningful inference from the description, and coherence with the final EP diagnosis when a peripheral vestibular diagnosis was made. Results Of 1,091 visits for dizziness, 887 (81.3%) documented a nystagmus assessment. Nystagmus was present in 185 out of 887 (20.9%) visits. When nystagmus was present, no further characteristics were recorded in 48 of the 185 visits (26%). The documentation of nystagmus (including all descriptors recorded) enabled a meaningful inference about the localization or cause in only 10 of the 185 (5.4%) visits. The nystagmus description conflicted with the EP diagnosis in 113 (80.7%) of the 140 visits that received a peripheral vestibular diagnosis. Conclusions Nystagmus assessments are frequently documented in acute dizziness presentations, but details do not generally enable a meaningful inference. Recorded descriptions usually conflict with the diagnosis when a peripheral vestibular diagnosis is rendered. Nystagmus assessments might be an important target in developing decision support for dizziness presentations. PMID:21676060

Documentation and environment of the Apollo 16 samples: A preliminary report

NASA Technical Reports Server (NTRS)

1972-01-01

A catalog which is a working document that shows the locations from which samples were collected during the Apollo 16 mission, and that provides a descriptive geologic context for each sample is presented. It is a compilation of notes from work in progress, and supersedes an earlier report prepared by the Apollo Lunar Geology Investigation Team. The information was obtained from the Air-to-Ground transcript from the astronaut crew, from lunar surface television, from 60 mm Hasselblad camera photographs, and from available LRL mugshot photographs of the samples. The sample descriptions are based on these sources of data.

Analysis of a risk prevention document using dependability techniques: a first step towards an effectiveness model

NASA Astrophysics Data System (ADS)

Ferrer, Laetitia; Curt, Corinne; Tacnet, Jean-Marc

2018-04-01

Major hazard prevention is a main challenge given that it is specifically based on information communicated to the public. In France, preventive information is notably provided by way of local regulatory documents. Unfortunately, the law requires only few specifications concerning their content; therefore one can question the impact on the general population relative to the way the document is concretely created. Ergo, the purpose of our work is to propose an analytical methodology to evaluate preventive risk communication document effectiveness. The methodology is based on dependability approaches and is applied in this paper to the Document d'Information Communal sur les Risques Majeurs (DICRIM; in English, Municipal Information Document on Major Risks). DICRIM has to be made by mayors and addressed to the public to provide information on major hazards affecting their municipalities. An analysis of law compliance of the document is carried out thanks to the identification of regulatory detection elements. These are applied to a database of 30 DICRIMs. This analysis leads to a discussion on points such as usefulness of the missing elements. External and internal function analysis permits the identification of the form and content requirements and service and technical functions of the document and its components (here its sections). Their results are used to carry out an FMEA (failure modes and effects analysis), which allows us to define the failure and to identify detection elements. This permits the evaluation of the effectiveness of form and content of each components of the document. The outputs are validated by experts from the different fields investigated. Those results are obtained to build, in future works, a decision support model for the municipality (or specialised consulting firms) in charge of drawing up documents.

The health care and life sciences community profile for dataset descriptions

PubMed Central

Alexiev, Vladimir; Ansell, Peter; Bader, Gary; Baran, Joachim; Bolleman, Jerven T.; Callahan, Alison; Cruz-Toledo, José; Gaudet, Pascale; Gombocz, Erich A.; Gonzalez-Beltran, Alejandra N.; Groth, Paul; Haendel, Melissa; Ito, Maori; Jupp, Simon; Juty, Nick; Katayama, Toshiaki; Kobayashi, Norio; Krishnaswami, Kalpana; Laibe, Camille; Le Novère, Nicolas; Lin, Simon; Malone, James; Miller, Michael; Mungall, Christopher J.; Rietveld, Laurens; Wimalaratne, Sarala M.; Yamaguchi, Atsuko

2016-01-01

Access to consistent, high-quality metadata is critical to finding, understanding, and reusing scientific data. However, while there are many relevant vocabularies for the annotation of a dataset, none sufficiently captures all the necessary metadata. This prevents uniform indexing and querying of dataset repositories. Towards providing a practical guide for producing a high quality description of biomedical datasets, the W3C Semantic Web for Health Care and the Life Sciences Interest Group (HCLSIG) identified Resource Description Framework (RDF) vocabularies that could be used to specify common metadata elements and their value sets. The resulting guideline covers elements of description, identification, attribution, versioning, provenance, and content summarization. This guideline reuses existing vocabularies, and is intended to meet key functional requirements including indexing, discovery, exchange, query, and retrieval of datasets, thereby enabling the publication of FAIR data. The resulting metadata profile is generic and could be used by other domains with an interest in providing machine readable descriptions of versioned datasets. PMID:27602295

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

76 FR 5187 - Notice of Proposed Information Collection: Comment Request; Emergency Homeowners' Loan Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Information Collection: Comment Request; Emergency Homeowners' Loan Program Data Elements AGENCY: Office of... following information: Title of Proposal: Emergency Homeowners' Loan Program Data Elements. Description of... of Affected Public: Emergency Homeowners' Loan Program Data Elements. Estimation of the total numbers...

TUNS user guide supplement: Data dictionary

NASA Technical Reports Server (NTRS)

1988-01-01

Provided is a data dictionary for the Technology Utilization Network System (TUNS) providing for each element name the long name, data type, data size, descriptive name and description, data of PRI clause, legal values, and location used.

48 CFR 811.202 - Maintenance of standardization documents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

48 CFR 811.202 - Maintenance of standardization documents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

48 CFR 811.202 - Maintenance of standardization documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

48 CFR 811.202 - Maintenance of standardization documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

48 CFR 811.202 - Maintenance of standardization documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

DRI Model of the U.S. Economy -- Model Documentation

EIA Publications

1993-01-01

Provides documentation on Data Resources, Inc., DRI Model of the U.S. Economy and the DRI Personal Computer Input/Output Model. It also describes the theoretical basis, structure and functions of both DRI models; and contains brief descriptions of the models and their equations.

Arizona TeleMedicine Network: System Procurement Specifications.

ERIC Educational Resources Information Center

Atlantic Research Corp., Alexandria, VA.

Providing general specifications and system descriptions for segments within the Arizona TeleMedicine Project (a telecommunication system designed to deliver health services to rurally isolated American Indians in Arizona), this document, when used with the appropriate route segment document, will completely describe the project's required…

Career Education. Career Preparation and Career Development. K-12.

ERIC Educational Resources Information Center

Danbury Public Schools, CT.

The document presents information pertaining to the program in career education at the Danbury (Connecticut) public schools. The system's organizational chart and policy statement precede descriptions of the elementary, junior high, and senior high programs. Also included are descriptions of inservice teacher training activities, specialized…

48 CFR 252.211-7002 - Availability for examination of specifications, standards, plans, drawings, data item...

Code of Federal Regulations, 2010 CFR

2010-10-01

... examination of specifications, standards, plans, drawings, data item descriptions, and other pertinent..., plans, drawings, data item descriptions, and other pertinent documents. As prescribed in 211.204(c), use the following provision: Availability for Examination of Specifications, Standards, Plans, Drawings...

A Syllabus for Biol 242--Human Anatomy.

ERIC Educational Resources Information Center

Jacob, Willis H.

This document is the fall and spring semester course syllabus of Biology 242--Human Anatomy at Southern University (Louisiana). Sections include: (1) Descriptive Information; (2) Specification of Course Goals and Objectives; (3) Readings; (4) Description of Instructional Procedures; (5) Course Requirements; (6) Course Schedule; (7) Evaluation of…

UAS-NAS Live Virtual Constructive Distributed Environment (LVC): LVC Gateway, Gateway Toolbox, Gateway Data Logger (GDL), SaaProc Software Design Description

NASA Technical Reports Server (NTRS)

Jovic, Srboljub

2015-01-01

This document provides the software design description for the two core software components, the LVC Gateway, the LVC Gateway Toolbox, and two participants, the LVC Gateway Data Logger and the SAA Processor (SaaProc).

Minnesota Department of Education Agricultural Education Program Descriptions 01.0000-01.9095

ERIC Educational Resources Information Center

Minnesota Department of Education, 2004

2004-01-01

This document provides a brief compilation of descriptions of agricultural education programs linked to Career and Technical Education (CTE) initiative in Minnesota. Agriculture Exploration courses focus on the animal sciences, plant sciences, natural resource sciences, agricultural business and marketing, and leadership development. Agribusiness…

Annual Review of Information Science and Technology. Volume Eight.

ERIC Educational Resources Information Center

Cuadra, Carlos A., Ed.; Luke, Ann W., Ed.

Descriptions and appraisals of significant recent trends and developments in the field of information science are presented. The eleven individual chapters deal, respectively, with the following topics: 1) the economics of information, 2) document description and representation, 3) automated language processing, 4) microform technology, 5) library…

SMART (Shop floor Modeling, Analysis and Reporting Tool Project

NASA Technical Reports Server (NTRS)

Centeno, Martha A.; Garcia, Maretys L.; Mendoza, Alicia C.; Molina, Louis A.; Correa, Daisy; Wint, Steve; Doice, Gregorie; Reyes, M. Florencia

1999-01-01

This document presents summarizes the design and prototype of the Shop floor Modeling, Analysis, and Reporting Tool (S.M.A.R.T.) A detailed description of it is found on the full documentation given to the NASA liaison. This documentation is also found on the A.R.I.S.E. Center web site, under a projected directory. Only authorized users can gain access to this site.

42 CFR 420.304 - Procedures for obtaining access to books, documents, and records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Procedures for obtaining access to books, documents... Books, Documents, and Records of Subcontractors § 420.304 Procedures for obtaining access to books... following elements: (1) Reasonable identification of the books, documents, and records to which access is...

Langley Atmospheric Information Retrieval System (LAIRS): System description and user's guide

NASA Technical Reports Server (NTRS)

Boland, D. E., Jr.; Lee, T.

1982-01-01

This document presents the user's guide, system description, and mathematical specifications for the Langley Atmospheric Information Retrieval System (LAIRS). It also includes a description of an optimal procedure for operational use of LAIRS. The primary objective of the LAIRS Program is to make it possible to obtain accurate estimates of atmospheric pressure, density, temperature, and winds along Shuttle reentry trajectories for use in postflight data reduction.

Specifying Skill-Based Training Strategies and Devices: A Model Description

DTIC Science & Technology

1990-06-01

Technical Report 897 Specifying Skill-Based Training N Strategies and Devices: A Model Description I Paui J. Sticha and Mark Schlager Human Resources...unlimied 90 ’ Technical Report 897 Specifying Skill-Based Training Strategies and Devices: A Model Description Paul J. Sticha and Mark Schlager Human...SECURITY CLASSIFICATION OF THIS PAGE Form Approved REPORT DOCUMENTATION PAGE FMNo o7 ote la. REPORT SECURITY CLASSIFICATION lb. RESTRICTWE MARKINGS

A Multiple-Label Guided Clustering Algorithm for Historical Document Dating and Localization.

PubMed

He, Sheng; Samara, Petros; Burgers, Jan; Schomaker, Lambert

2016-11-01

It is of essential importance for historians to know the date and place of origin of the documents they study. It would be a huge advancement for historical scholars if it would be possible to automatically estimate the geographical and temporal provenance of a handwritten document by inferring them from the handwriting style of such a document. We propose a multiple-label guided clustering algorithm to discover the correlations between the concrete low-level visual elements in historical documents and abstract labels, such as date and location. First, a novel descriptor, called histogram of orientations of handwritten strokes, is proposed to extract and describe the visual elements, which is built on a scale-invariant polar-feature space. In addition, the multi-label self-organizing map (MLSOM) is proposed to discover the correlations between the low-level visual elements and their labels in a single framework. Our proposed MLSOM can be used to predict the labels directly. Moreover, the MLSOM can also be considered as a pre-structured clustering method to build a codebook, which contains more discriminative information on date and geography. The experimental results on the medieval paleographic scale data set demonstrate that our method achieves state-of-the-art results.

Coal conversion: description of technologies and necessary biomedical and environmental research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-08-01

This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants.« less

Rapid Implementation of Inpatient Electronic Physician Documentation at an Academic Hospital

PubMed Central

Hahn, J.S.; Bernstein, J.A.; McKenzie, R.B.; King, B.J.; Longhurst, C.A.

2012-01-01

Electronic physician documentation is an essential element of a complete electronic medical record (EMR). At Lucile Packard Children’s Hospital, a teaching hospital affiliated with Stanford University, we implemented an inpatient electronic documentation system for physicians over a 12-month period. Using an EMR-based free-text editor coupled with automated import of system data elements, we were able to achieve voluntary, widespread adoption of the electronic documentation process. When given the choice between electronic versus dictated report creation, the vast majority of users preferred the electronic method. In addition to increasing the legibility and accessibility of clinical notes, we also decreased the volume of dictated notes and scanning of handwritten notes, which provides the opportunity for cost savings to the institution. PMID:23620718

Integrated propulsion technology demonstrator. Program plan

NASA Technical Reports Server (NTRS)

1994-01-01

NASA and Rockwell have embarked on a cooperative agreement to define, develop, fabricate, and operate an integrated propulsion technology demonstrator (IPTD) for the purpose of validating design, process, and technology improvements of launch vehicle propulsion systems. This program, a result of NRA8-11, Task Area 1 A, is jointly funded by both NASA and Rockwell and is sponsored by the Reusable Launch Vehicle office at NASA Marshall Space flight Center. This program plan provides to the joint NASA/Rockwell integrated propulsion technology demonstrator (IPTD) team a description of the activities within tasks / sub tasks and associated schedules required to successfully achieve program objectives. This document also defines the cost elements and manpower allocations for each sub task for purpose of program control. This plan is updated periodically by developing greater depth of direction for outyear tasks as the program matures. Updating is accomplished by adding revisions to existing pages or attaching page revisions to this plan. In either case, revisions will be identified by appropriate highlighting of the change, or specifying a revision page through the use of footnotes on the bottom right of each change page. Authorization for the change is provided by the principal investigators to maintain control of this program plan document and IPTD program activities.

Fuel Economy Label and CAFE Data Inventory

EPA Pesticide Factsheets

The Fuel Economy Label and CAFE Data asset contains measured summary fuel economy estimates and test data for light-duty vehicle manufacturers by model for certification as required under the Energy Policy and Conservation Act of 1975 (EPCA) and The Energy Independent Security Act of 2007 (EISA) to collect vehicle fuel economy estimates for the creation of Economy Labels and for the calculation of Corporate Average Fuel Economy (CAFE). Manufacturers submit data on an annual basis, or as needed to document vehicle model changes.The EPA performs targeted fuel economy confirmatory tests on approximately 15% of vehicles submitted for validation. Confirmatory data on vehicles is associated with its corresponding submission data to verify the accuracy of manufacturer submissions beyond standard business rules. Submitted data comes in XML format or as documents, with the majority of submissions being sent in XML, and includes descriptive information on the vehicle itself, fuel economy information, and the manufacturer's testing approach. This data may contain proprietary information (CBI) such as information on estimated sales or other data elements indicated by the submitter as confidential. CBI data is not publically available; however, within the EPA data can accessed under the restrictions of the Office of Transportation and Air Quality (OTAQ) CBI policy [RCS Link]. Datasets are segmented by vehicle model/manufacturer and/or year with corresponding fuel economy, te

Living Together in Space: The Design and Operation of the Life Support Systems on the International Space Station. Volume 1

NASA Technical Reports Server (NTRS)

Wieland, P. O.

1998-01-01

The International Space Station (ISS) incorporates elements designed and developed by an international consortium led by the United States (U.S.), and by Russia. For this cooperative effort to succeed, it is crucial that the designs and methods of design of the other partners are understood sufficiently to ensure compatibility. Environmental Control and Life Support (ECLS) is one system in which functions are performed independently on the Russian Segment (RS) and on the U.S./international segments. This document describes, in two volumes, the design and operation of the ECLS Systems (ECLSS) on board the ISS. This current volume, Volume 1, is divided into three chapters. Chapter 1 is a general overview of the ISS, describing the configuration, general requirements, and distribution of systems as related to the ECLSS, and includes discussion of the design philosophies of the partners and methods of verification of equipment. Chapter 2 describes the U.S. ECLSS and technologies in greater detail. Chapter 3 describes the ECLSS in the European Attached Pressurized Module (APM), Japanese Experiment Module (JEM), and Italian Mini-Pressurized Logistics Module (MPLM). Volume II describes the Russian ECLSS and technologies in greater detail. These documents present thorough, yet concise, descriptions of the ISS ECLSS.

FY 1991 RDT&E Descriptive Summaries

DTIC Science & Technology

1990-01-01

OF PROJECT : The Defense Sciences program element provides the technical foundation for long-term improvements in military equiment...DESCRIPTION OF PROJECT : Develop the fundamental technology in advanced digital structures and network concepts for smaller, more powerful, less expensive...DESCRIPTION OF PROJECT : The 1985 Defense Science Board (DSB) noted that the United States was behind and failing further behind in armor and

KAPPA -- Kernel Application Package

NASA Astrophysics Data System (ADS)

Currie, Malcolm J.; Berry, David. S.

KAPPA is an applications package comprising about 180 general-purpose commands for image processing, data visualisation, and manipulation of the standard Starlink data format---the NDF. It is intended to work in conjunction with Starlink's various specialised packages. In addition to the NDF, KAPPA can also process data in other formats by using the `on-the-fly' conversion scheme. Many commands can process data arrays of arbitrary dimension, and others work on both spectra and images. KAPPA operates from both the UNIX C-shell and the ICL command language. This document describes how to use KAPPA and its features. There is some description of techniques too, including a section on writing scripts. This document includes several tutorials and is illustrated with numerous examples. The bulk of this document comprises detailed descriptions of each command as well as classified and alphabetical summaries.

Descriptive Chemistry in High School Curriculum.

ERIC Educational Resources Information Center

Rajan, Raj G.

1983-01-01

Discusses incorporation of descriptive chemistry and scientific/technical writing at the high school level. After discussing the periodic table, each student prepares a paper discussing the history, atomic data, occurring/extraction/purification, properties, and uses of an element. (JN)

Curriculum Development System for Navy Technical Training.

ERIC Educational Resources Information Center

Butler, Lucius

Documentation for the U.S. Navy's curriculum development system is brought together in this paper, beginning with a description of the Naval Technical Training System. This description includes the Navy Training Plan (NTP) process, which is the current mechanism for introducing new courses; the organization and administration of the system; the…

Specialty and Systems Engineering Supplement to IEEE 15288.1

DTIC Science & Technology

2017-08-28

requirements with a space-specific recommended practice. (8) Added Section 3.2.21, Systems Engineering Data Item Descriptions (DIDs...Systems Engineering Data Item Descriptions ........................................................ 17 4. Applicable Documents...and life cycle cost analyses. d. Alternative designs and capabilities of manufacturing are evaluated . e. Long-lead-time items, material source

48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...

48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...

48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...

48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...

48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...

State Competencies for Writing: Grades K-6. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency documents from seven states: Florida, Georgia, Louisiana, Michigan, Oklahoma, Tennessee, and Texas. Each description provides a picture of the general nature of the state requirements and a discussion of the specific writing skills requirements. The procedures used to compile a…

Effective Middle Level Teaching: Perceptions on the Preparedness of Newly Hired Teachers

ERIC Educational Resources Information Center

Howell, Penny B.; Cook, Chris; Faulkner, Shawn A.

2013-01-01

This interpretive, exploratory study utilized survey methodology to document middle level principals' perceptions of effective teaching practices and the preparedness of newly hired middle level teachers. The findings suggest that principals' descriptions of effective teaching differ from their descriptions of effective teachers. Additionally,…

46 CFR 550.403 - Contents of petitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... description and citation of the foreign law, rule, regulation, practice or competitive method complained of; (b) A certified copy of any law, rule, regulation or other document involved and, if not in English... competitive method; (d) A clear description, in detail, of the harm already caused or which may reasonably be...

106-17 Telemetry Standards Metadata Configuration Chapter 23

DTIC Science & Technology

2017-07-01

23-1 23.2 Metadata Description Language ...Chapter 23, July 2017 iii Acronyms HTML Hypertext Markup Language MDL Metadata Description Language PCM pulse code modulation TMATS Telemetry...Attributes Transfer Standard W3C World Wide Web Consortium XML eXtensible Markup Language XSD XML schema document Telemetry Network Standard

The Tehran Book Processing Centre.

ERIC Educational Resources Information Center

Harvey, John F.

Establishment of the Tehran Book Processing Centre (Tebroc) was proposed in the Spring of 1968. This document is a descriptive and historical account of the center, and a description of its contributions to Iranian processing development. The center was modeled, to a certain extent, after Bro-Dart's Alanar in Williamsport, Pennsylvania. Tebroc was…

Computer hardware description languages - A tutorial

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1979-01-01

The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.

Descriptive Study of Noncommercial FM Radio Stations Affiliated with Colleges and Universities.

ERIC Educational Resources Information Center

Leidman, Mary Beth; Lamberski, Richard J.

Designed to establish a framework for current and future documentation of FM radio in institutions of higher education, this study examined the state of noncommercial FM radio stations affiliated with colleges and universities. Topics investigated included: (1) basic descriptions of institutions housing noncommercial radio stations; (2) operating…

The Assessment of Hands-On Elementary Science Programs.

ERIC Educational Resources Information Center

Hein, George, Ed.

This document contains 15 chapters on various topics related to elementary science assessment. A comprehensive description of efforts to introduce alternatives to multiple-choice, paper and pencil tests to assess science learning is provided. The monograph includes an analysis of assessment issues, descriptions of current practice, and suggestions…

Current Programme.

ERIC Educational Resources Information Center

Bernard Van Leer Foundation, The Hague (Netherlands).

This document provides brief descriptions of the major projects supported in 1989 by the Bernard van Leer Foundation. A total of 94 projects are covered. Each is described in terms of: (1) the sponsoring institution; (2) the title of the project; (3) the duration of project activities supported by the foundation; and (4) a description of the…

41 CFR 60-3.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2011 CFR

2011-07-01

... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...

41 CFR 60-3.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2013 CFR

2013-07-01

... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...

41 CFR 60-3.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...

41 CFR 60-3.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2014 CFR

2014-07-01

... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...

41 CFR 60-3.15 - Documentation of impact and validity evidence.

Code of Federal Regulations, 2012 CFR

2012-07-01

... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...

Quality in End User Documentation.

ERIC Educational Resources Information Center

Morrison, Ronald

1994-01-01

Discusses quality in end-user documentation for computer applications and explains four approaches to improving quality in end-user documents. Highlights include online help, usability testing, technical writing elements, statistical approaches, and concepts relating to software quality that are also applicable to user manuals. (LRW)

Transit vehicle-to-infrastructure (V2I) applications : near term research and development : transit traveler information infrastructure mobility application : operational concept.

DOT National Transportation Integrated Search

2015-06-01

This document serves as an Operational Concept for the Transit Traveler Information Infrastructure Mobility Application. The purpose of this document is to provide an operational description of how the Transit Traveler Information Infrastructur...

Financing the School Plant. Draft.

ERIC Educational Resources Information Center

King, Dave; Kimbrough, Ted

Thirteen methods of financing school buildings in California are described in this document. A brief introduction reviews recent changes in California school financing, following passage of Proposition 13, and explains the need for new financing methods. For each method, the document provides a description (which also points out limitations),…

48 CFR 252.211-7001 - Availability of Specifications, Standards, and Data Item Descriptions Not Listed in the...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standardization Information System (ASSIST), and Plans, Drawings, and Other Pertinent Documents. Availability of... Information System (ASSIST), and Plans, Drawings, and Other Pertinent Documents. Availability of... Streamlining and Standardization Information System (ASSIST), and Plans, Drawings, and Other Pertinent...

40 CFR 62.14424 - What documentation must I maintain onsite?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false What documentation must I maintain onsite? 62.14424 Section 62.14424 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... under this subpart; (2) Description of basic combustion theory applicable to an HMIWI; (3) Procedures...

OSMEAN - OSCULATING/MEAN CLASSICAL ORBIT ELEMENTS CONVERSION (HP9000/7XX VERSION)

NASA Technical Reports Server (NTRS)

Guinn, J. R.

1994-01-01

OSMEAN is a sophisticated FORTRAN algorithm that converts between osculating and mean classical orbit elements. Mean orbit elements are advantageous for trajectory design and maneuver planning since they can be propagated very quickly; however, mean elements cannot describe the exact orbit at any given time. Osculating elements will enable the engineer to give an exact description of an orbit; however, computation costs are significantly higher due to the numerical integration procedure required for propagation. By calculating accurate conversions between osculating and mean orbit elements, OSMEAN allows the engineer to exploit the advantages of each approach for the design and planning of orbital trajectories and maneuver planning. OSMEAN is capable of converting mean elements to osculating elements or vice versa. The conversion is based on modelling of all first order aspherical and lunar-solar gravitation perturbations as well as a second-order aspherical term based on the second degree central body zonal perturbation. OSMEAN is written in FORTRAN 77 for HP 9000 series computers running HP-UX (NPO-18796) and DEC VAX series computers running VMS (NPO-18741). The HP version requires 388K of RAM for execution and the DEC VAX version requires 254K of RAM for execution. Sample input and output are listed in the documentation. Sample input is also provided on the distribution medium. The standard distribution medium for the HP 9000 series version is a .25 inch streaming magnetic IOTAMAT tape cartridge in UNIX tar format. It is also available on a .25 inch streaming magnetic tape cartridge in UNIX tar format or on a 3.5 inch diskette in UNIX tar format. The standard distribution medium for the DEC VAX version is a 1600 BPI 9-track magnetic tape in DEC VAX BACKUP format. It is also available on a TK50 tape cartridge in DEC VAX BACKUP format. OSMEAN was developed on a VAX 6410 in 1989, and was ported to the HP 9000 series platform in 1991. It is a copyrighted work with all copyright vested in NASA.

OSMEAN - OSCULATING/MEAN CLASSICAL ORBIT ELEMENTS CONVERSION (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Guinn, J. R.

1994-01-01

OSMEAN is a sophisticated FORTRAN algorithm that converts between osculating and mean classical orbit elements. Mean orbit elements are advantageous for trajectory design and maneuver planning since they can be propagated very quickly; however, mean elements cannot describe the exact orbit at any given time. Osculating elements will enable the engineer to give an exact description of an orbit; however, computation costs are significantly higher due to the numerical integration procedure required for propagation. By calculating accurate conversions between osculating and mean orbit elements, OSMEAN allows the engineer to exploit the advantages of each approach for the design and planning of orbital trajectories and maneuver planning. OSMEAN is capable of converting mean elements to osculating elements or vice versa. The conversion is based on modelling of all first order aspherical and lunar-solar gravitation perturbations as well as a second-order aspherical term based on the second degree central body zonal perturbation. OSMEAN is written in FORTRAN 77 for HP 9000 series computers running HP-UX (NPO-18796) and DEC VAX series computers running VMS (NPO-18741). The HP version requires 388K of RAM for execution and the DEC VAX version requires 254K of RAM for execution. Sample input and output are listed in the documentation. Sample input is also provided on the distribution medium. The standard distribution medium for the HP 9000 series version is a .25 inch streaming magnetic IOTAMAT tape cartridge in UNIX tar format. It is also available on a .25 inch streaming magnetic tape cartridge in UNIX tar format or on a 3.5 inch diskette in UNIX tar format. The standard distribution medium for the DEC VAX version is a 1600 BPI 9-track magnetic tape in DEC VAX BACKUP format. It is also available on a TK50 tape cartridge in DEC VAX BACKUP format. OSMEAN was developed on a VAX 6410 in 1989, and was ported to the HP 9000 series platform in 1991. It is a copyrighted work with all copyright vested in NASA.

Elements of an Asbestos Operations and Maintenance (O&M) Program

EPA Pesticide Factsheets

Links to descriptions of Elements of an Operations and Maintenance (O&M) Program: Training, Occupant Notification, Monitoring ACM, Job-Site Controls for Work Involving ACM, Safe Work Practices, Recordkeeping, Worker Protection.

TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 2, User`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gartling, D.K.

User instructions are given for the finite element, electromagnetics program, TORO II. The theoretical background and numerical methods used in the program are documented in SAND95-2472. The present document also describes a number of example problems that have been analyzed with the code and provides sample input files for typical simulations. 20 refs., 34 figs., 3 tabs.

Variations in structures, processes and outcomes of community mental health teams for older people: a systematic review of the literature.

PubMed

Abendstern, M; Harrington, V; Brand, C; Tucker, S; Wilberforce, M; Challis, D

2012-01-01

In the UK and elsewhere, specialist community mental health teams (CMHTs) are central to the provision of comprehensive services for older people with mental ill health. Recent guidance documents suggest a core set of attributes that such teams should encompass. This article reports on a systematic literature review undertaken to collate existing evidence regarding the structures and processes of CMHTs for older people and to evaluate evidence linking approaches to effectiveness. Relevant publications were identified via systematic searches, both electronic and manual. Searches were limited to the UK for descriptions of organisation and practice but included international literature where comparisons between different CMHT arrangements were evaluated. Empirical, peer-reviewed studies from 1989 onward were included, extended to non peer-reviewed nationally or regionally representative reports, published after 1998, for the descriptive element. Forty-five studies met inclusion criteria of which seven provided comparative outcome data. All but one were UK based. The most robust evidence related to research conducted in exemplar teams. Limited evidence was found regarding the effectiveness of many of the core attributes recommended in policy directives although their presence was reported in much of the literature. The contrast between presentation and evaluation of attributes is stark. Whilst some gaps can be filled from related fields, further research is required that moves beyond description to evaluation of the impact of team design on service user outcomes in order to inform future policy directives and practice guidance. A framework for an evidence-based model of CMHTs for older people is provided.

Management control and status reports documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 5

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.

Design study of RL10 derivatives. Volume 3, part 1: Preliminary interface control document. [development of baseline engines for space tug vehicles

NASA Technical Reports Server (NTRS)

Adams, A.

1973-01-01

The Interface Control Document contains engine information necessary for installation of the baseline RL10 Derivative engines in the Space Tug vehicle. The ICD presents a description of the baseline engines and their operating characteristics, mass and load characteristics, and environmental criteria. The document defines the engine/vehicle mechanical, electrical, fluid and pneumatic interface requirements.

Oak Ridge TNS Program: system description manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, R.L.; Becraft, W.R.; Brown, T.G.

1979-05-01

This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

Description and Evaluation of GDEM-V 3.0

DTIC Science & Technology

2009-02-06

Description and Evaluation of GDEM -V 3.0 Michael R. caRnes Ocean Sciences Branch Oceanography Division February 6, 2009 i REPORT DOCUMENTATION PAGE Form...include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Description and Evaluation of GDEM -V 3.0 Michael R. Carnes...unlimited. Unclassified Unclassified Unclassified UL 24 Michael R. Carnes (228) 688-5648 The GDEM (Generalized Digital Environment Model) has served as

Acquisition Documentation Streamlining, the SEP, and the PESHE

DTIC Science & Technology

2012-05-21

identifying any other ESOH requirements (e.g., ban on use of Ozone Depleting Substances or hexavalent chrome )  "Description/Comments:" Use 2-3...limitations on use of hexavalent chrome )  "Description/Comments:" Use 2-3 paragraphs to describe the strategy for integrating ESOH into SE processes...optional tasks) and identifying any other ESOH requirements (e.g., ban on use of Ozone Depleting Substances or hexavalent chrome )  "Description

Using CASE tools to write engineering specifications

NASA Astrophysics Data System (ADS)

Henry, James E.; Howard, Robert W.; Iveland, Scott T.

1993-08-01

There are always a wide variety of obstacles to writing and maintaining engineering documentation. To combat these problems, documentation generation can be linked to the process of engineering development. The same graphics and communication tools used for structured system analysis and design (SSA/SSD) also form the basis for the documentation. The goal is to build a living document, such that as an engineering design changes, the documentation will `automatically' revise. `Automatic' is qualified by the need to maintain textual descriptions associated with the SSA/SSD graphics, and the need to generate new documents. This paper describes a methodology and a computer aided system engineering toolset that enables a relatively seamless transition into document generation for the development engineering team.

49 CFR 587.13 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

Channeling Your Donna Reed Syndrome.

ERIC Educational Resources Information Center

Mercer County Community Coll., Trenton, NJ.

This document offers materials on stress management used in a workplace literacy project developed by Mercer County Community College (New Jersey) and its partners. The document contains handouts on the following topics: (1) description of learners' typical days and identification of their stress points; (2) what stress is and is not; (3) a…

School Safety and Security.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

This document offers additional guidelines for school facilities in California in the areas of safety and security, lighting, and cleanliness. It also offers a description of technology resources available on the World Wide Web. On the topic of safety and security, the document offers guidelines in the areas of entrances, doors, and controlled…

78 FR 14556 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... for ACF. OMB No.: 0992-0005. Description: The Advance Planning Document (APD) process, established in... Biennial Reports 54 1 1.50 81 Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning... for the proper performance of the functions of the agency, including whether the information shall...

Transit vehicle-to-infrastructure (V2I) applications : near term research and development : transit vehicle and center data exchange : operational concept.

DOT National Transportation Integrated Search

2015-03-01

This document serves as an Operational Concept for the Transit Vehicle and Center Data Exchange application. The purpose of this document is to provide an operational description of how the Transit Vehicle and Center Data Exchange application m...

Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.

ERIC Educational Resources Information Center

Busby, John C.; Johnson, Richard S.

Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…

DEVELOPMENT AND EVALUATION OF NOVEL DOSE-RESPONSE MODELS FOR USE IN MICROBIAL RISK ASSESSMENT

EPA Science Inventory

This document contains a description of dose-response modeling methods designed to provide a robust approach under uncertainty for predicting human population risk from exposure to pathogens in drinking water.

The purpose of this document is to describe a body of literatu...

IPPF Co-operative Information Service (ICIS). February 1978.

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

This publication is a catalogue of document descriptions that may be of use to national family planning/population organizations. The International Planned Parenthood Federation (IPPF) Cooperative Information Service (ICIS) has developed this quarterly series as a service to population documentation centers so that these centers can acquire the…

Transit vehicle-to-infrastructure (V2I) applications : near term research and development. Transit bus-pedestrian/cyclist crossing safety application : operational concept.

DOT National Transportation Integrated Search

2013-11-01

This document serves as an Operational Concept for the Transit Bus-Pedestrian/Cyclist Crossing Safety application. The purpose of this document is to provide an operational description of how the Transit Bus-Pedestrian/Cyclist Crossing Safety W...

Cassini/Huygens Program Archive Plan for Science Data

NASA Technical Reports Server (NTRS)

Conners, D.

2000-01-01

The purpose of this document is to describe the Cassini/Huygens science data archive system which includes policy, roles and responsibilities, description of science and supplementary data products or data sets, metadata, documentation, software, and archive schedule and methods for archive transfer to the NASA Planetary Data System (PDS).

Development of a curved pipe capability for the NASTRAN finite element program

NASA Technical Reports Server (NTRS)

Jeter, J. W., Jr.

1977-01-01

A curved pipe element capability for the NASTRAN structural analysis program is developed using the NASTRAN dummy element feature. A description is given of the theory involved in the subroutines which describe stiffness, mass, thermal and enforced deformation loads, and force and stress recovery for the curved pipe element. Incorporation of these subroutines into NASTRAN is discussed. Test problems are proposed. Instructions on use of the new element capability are provided.

Financial and Legal Characteristics of Cross-Jurisdictional Shared Service Agreements Between Local Public Health Agencies.

PubMed

Watts, Theresa; Zahner, Susan; Mrochek, Tracy

Cross-jurisdictional sharing is a resource management strategy increasingly being used by local health departments to provide essential and mandated public health services. Cross-jurisdictional shared service agreements (CJSSAs) are the legal documents that govern cross-jurisdictional sharing arrangements. Information on the financial and legal characteristics of CJSSAs is limited. This study described the financial and legal elements of a set of formal, written CJSSAs in one state to offer guidance to practitioners on how to structure the financial and legal elements in CJSSAs. CJSSAs, which included a written statement about the financial commitment governed by the agreement (n = 63), were analyzed. Data collection occurred through 2 structured data extraction tools and structured telephone interviews conducted with local and tribal health department directors. Descriptive statistics of all variables and a single predictor linear regression were performed. The higher population partner to the CJSSA more often provided the public health service and received payment (n = 41; 65%). Financial statements were found to vary by CJSSA characteristic. CJSSAs were more likely to be legally complete when a legal counsel was involved in creating them (odds ratio = 2.74; 95% confidence interval, 2.19-3.29; P ≤ .001). Yet, only 2 (3%) of the CJSSAs described all the legal elements and were considered legally complete. Clearly identifying and including necessary fiscal and legal elements when creating and managing CJSSAs may strengthen agreements and reduce local health department legal and fiscal vulnerabilities. Local health department capacity for planning, coordination, budgeting, management, and evaluation is essential when creating CJSSA. Careful consideration of cost-sharing and consulting with legal counsel could strengthen the CJSSA.

Developing a Minimum Data Set for an Information Management System to Study Traffic Accidents in Iran.

PubMed

Mohammadi, Ali; Ahmadi, Maryam; Gharagozlu, Alireza

2016-03-01

Each year, around 1.2 million people die in the road traffic incidents. Reducing traffic accidents requires an exact understanding of the risk factors associated with traffic patterns and behaviors. Properly analyzing these factors calls for a comprehensive system for collecting and processing accident data. The aim of this study was to develop a minimum data set (MDS) for an information management system to study traffic accidents in Iran. This descriptive, cross-sectional study was performed in 2014. Data were collected from the traffic police, trauma centers, medical emergency centers, and via the internet. The investigated resources for this study were forms, databases, and documents retrieved from the internet. Forms and databases were identical, and one sample of each was evaluated. The related internet-sourced data were evaluated in their entirety. Data were collected using three checklists. In order to arrive at a consensus about the data elements, the decision Delphi technique was applied using questionnaires. The content validity and reliability of the questionnaires were assessed by experts' opinions and the test-retest method, respectively. An (MDS) of a traffic accident information management system was assigned to three sections: a minimum data set for traffic police with six classes, including 118 data elements; a trauma center with five data classes, including 57 data elements; and a medical emergency center, with 11 classes, including 64 data elements. Planning for the prevention of traffic accidents requires standardized data. As the foundation for crash prevention efforts, existing standard data infrastructures present policymakers and government officials with a great opportunity to strengthen and integrate existing accident information systems to better track road traffic injuries and fatalities.

Developing a Minimum Data Set for an Information Management System to Study Traffic Accidents in Iran

PubMed Central

Mohammadi, Ali; Ahmadi, Maryam; Gharagozlu, Alireza

2016-01-01

Background: Each year, around 1.2 million people die in the road traffic incidents. Reducing traffic accidents requires an exact understanding of the risk factors associated with traffic patterns and behaviors. Properly analyzing these factors calls for a comprehensive system for collecting and processing accident data. Objectives: The aim of this study was to develop a minimum data set (MDS) for an information management system to study traffic accidents in Iran. Materials and Methods: This descriptive, cross-sectional study was performed in 2014. Data were collected from the traffic police, trauma centers, medical emergency centers, and via the internet. The investigated resources for this study were forms, databases, and documents retrieved from the internet. Forms and databases were identical, and one sample of each was evaluated. The related internet-sourced data were evaluated in their entirety. Data were collected using three checklists. In order to arrive at a consensus about the data elements, the decision Delphi technique was applied using questionnaires. The content validity and reliability of the questionnaires were assessed by experts’ opinions and the test-retest method, respectively. Results: An (MDS) of a traffic accident information management system was assigned to three sections: a minimum data set for traffic police with six classes, including 118 data elements; a trauma center with five data classes, including 57 data elements; and a medical emergency center, with 11 classes, including 64 data elements. Conclusions: Planning for the prevention of traffic accidents requires standardized data. As the foundation for crash prevention efforts, existing standard data infrastructures present policymakers and government officials with a great opportunity to strengthen and integrate existing accident information systems to better track road traffic injuries and fatalities. PMID:27247791

Information system life-cycle and documentation standards, volume 1

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

The Software Management and Assurance Program (SMAP) Information System Life-Cycle and Documentation Standards Document describes the Version 4 standard information system life-cycle in terms of processes, products, and reviews. The description of the products includes detailed documentation standards. The standards in this document set can be applied to the life-cycle, i.e., to each phase in the system's development, and to the documentation of all NASA information systems. This provides consistency across the agency as well as visibility into the completeness of the information recorded. An information system is software-intensive, but consists of any combination of software, hardware, and operational procedures required to process, store, or transmit data. This document defines a standard life-cycle model and content for associated documentation.

Discrete-Element bonded-particle Sea Ice model DESIgn, version 1.3a - model description and implementation

NASA Astrophysics Data System (ADS)

Herman, Agnieszka

2016-04-01

This paper presents theoretical foundations, numerical implementation and examples of application of the two-dimensional Discrete-Element bonded-particle Sea Ice model - DESIgn. In the model, sea ice is represented as an assemblage of objects of two types: disk-shaped "grains" and semi-elastic bonds connecting them. Grains move on the sea surface under the influence of forces from the atmosphere and the ocean, as well as interactions with surrounding grains through direct contact (Hertzian contact mechanics) and/or through bonds. The model has an experimental option of taking into account quasi-three-dimensional effects related to the space- and time-varying curvature of the sea surface, thus enabling simulation of ice breaking due to stresses resulting from bending moments associated with surface waves. Examples of the model's application to simple sea ice deformation and breaking problems are presented, with an analysis of the influence of the basic model parameters ("microscopic" properties of grains and bonds) on the large-scale response of the modeled material. The model is written as a toolbox suitable for usage with the open-source numerical library LIGGGHTS. The code, together with full technical documentation and example input files, is freely available with this paper and on the Internet.

Documentation for the machine-readable version of the Revised S210 Catalog of Far-Ultraviolet Objects (Page, Carruthers and Heckathorn 1982)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

A detailed description of the machine-readable revised catalog as it is currently being distributed from the Astronomical Data Center is given. This catalog of star images was compiled from imagery obtained by the Naval Research Laboratory (NRL) Far-Ultraviolet Camera/Spectrograph (Experiments S201) operated from 21 to 23 April 1972 on the lunar surface during the Apollo 16 mission. The documentation includes a detailed data format description, a table of indigenous characteristics of the magnetic tape file, and a sample listing of data records exactly as they are presented in the machine-readable version.

Biodiversity and parasites of wildlife: helminths of Australasian marsupials.

PubMed

Beveridge, Ian; Spratt, David M

2015-04-01

Despite current attempts to document the extent of biodiversity on Earth, significant problems exist in fully documenting the helminth parasites of wildlife. Using the Australasian marsupials as an example, we examine some of these difficulties, including challenges in collecting uncommon host species, the ongoing description of new species of marsupials, the presence of cryptic species, and the decline in taxonomic expertise in Australia. Although optimistic global predictions have been made concerning the rate of discovery and description of new species of animals, these predictions may not apply in the case of specific groups of animals such as the Australasian marsupials. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hanford Site National Environmental Policy Act (NEPA) Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohay, A.C.; Fosmire, C.J.; Neitzel, D.A.

1999-09-28

This document describes the US Department of Energy's (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many NEPA documents being prepared by DOE contractors. No conclusions or recommendations are provided. This year's report is the eleventh revision of the original document published in 1988 and is (until replaced by the 12th revision) the only version that is relevant for use in the preparation of Hanford NEPA; SEPA and CERCLA documents. The two chapters included in this document (Chapters 4 and 6) are numbered tomore » correspond to the chapters where such information is presented in environmental impact statements (EISs) and other Site-related NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology, geology, hydrology, ecology, cultural, archaeological and historical resources, socioeconomic; occupational safety, and noise. Sources for extensive tabular data related to these topics are provided in the chapter. Most subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, of the 100,200,300, and other Areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) is essentially a definitive NEPA Chapter 6.0, which describes applicable federal and state laws and regulations, DOE directives and permits, and environmental standards directly applicable to the NEPA documents on the Hanford Site. People preparing environmental assessments and EISs should also be cognizant of the document entitled ''Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements'' published by the DOE Office of NEPA Oversight. Pacific Northwest National Laboratory (PNNL) staff prepared individual sections of this document, with input from other Site contractors. More detailed data are available from reference sources cited or from the authors. The following sections of the document were reviewed by the authors and updated with the best available information through June 1999: Climate and Meteorology; Ecology; Cultural, Archaeological, and Historical Resources; Socioeconomics; and All of Chapter 6.« less

A human-dimensions review of human-wildlife disturbance: A literature review of impacts, frameworks, and management solutions

USGS Publications Warehouse

Cline, Robert; Sexton, Natalie; Stewart, Susan C.

2007-01-01

The following report was prepared for the U.S. Fish and Wildlife Service National Refuge System in support of their Comprehensive Conservation Planning (CCP) efforts by the Policy Analysis and Science Assistance Branch (PASA), Fort Collins Science Center, U.S. Geological Survey. While this document provides a summary of contemporary recreation management literature and methodologies, relevant to the subject of managing wildlife disturbances on national wildlife refuges, this document should be viewed as a starting point for management administrators. This document identifies general issues relating to wildlife disturbance and visitor impacts including a description of disturbance, recreational impacts, related human dimensions applications, management frameworks, and a general summary of management solutions. The section on descriptions of wildlife disturbance and impacts draws heavily from the report entitled 'Managing the Impacts of Visitor Use on Waterbirds -- A Literature Review of Impacts and Mitigation' (DeLong, 2002; Delong and Adamcik, in press) and is referenced in the text. This document is more comprehensive in its review of wildlife response to disturbance. This document is intended to discuss the human-dimensions aspect of wildlife disturbance, summarizing human dimensions and recreation management literature as it applies to this topic.

Empirical Monod-Beuneu relation of spin relaxation revisited for elemental metals

NASA Astrophysics Data System (ADS)

Szolnoki, L.; Kiss, A.; Forró, L.; Simon, F.

2014-03-01

Monod and Beuneu [P. Monod and F. Beuneu, Phys. Rev. B 19, 911 (1979), 10.1103/PhysRevB.19.911] established the validity of the Elliott-Yafet theory for elemental metals through correlating the experimental electron spin resonance linewidth with the so-called spin-orbit admixture coefficients and the momentum-relaxation theory. The spin-orbit admixture coefficients data were based on atomic spin-orbit splitting. We highlight two shortcomings of the previous description: (i) the momentum-relaxation involves the Debye temperature and the electron-phonon coupling whose variation among the elemental metals was neglected, (ii) the Elliott-Yafet theory involves matrix elements of the spin-orbit coupling (SOC), which are however not identical to the SOC induced energy splitting of the atomic levels, even though the two have similar magnitudes. We obtain the empirical spin-orbit admixture parameters for the alkali metals by considering the proper description of the momentum relaxation theory. In addition we present a model calculation, which highlights the difference between the SOC matrix element and energy splitting.

An unconditionally stable method for numerically solving solar sail spacecraft equations of motion

NASA Astrophysics Data System (ADS)

Karwas, Alex

Solar sails use the endless supply of the Sun's radiation to propel spacecraft through space. The sails use the momentum transfer from the impinging solar radiation to provide thrust to the spacecraft while expending zero fuel. Recently, the first solar sail spacecraft, or sailcraft, named IKAROS completed a successful mission to Venus and proved the concept of solar sail propulsion. Sailcraft experimental data is difficult to gather due to the large expenses of space travel, therefore, a reliable and accurate computational method is needed to make the process more efficient. Presented in this document is a new approach to simulating solar sail spacecraft trajectories. The new method provides unconditionally stable numerical solutions for trajectory propagation and includes an improved physical description over other methods. The unconditional stability of the new method means that a unique numerical solution is always determined. The improved physical description of the trajectory provides a numerical solution and time derivatives that are continuous throughout the entire trajectory. The error of the continuous numerical solution is also known for the entire trajectory. Optimal control for maximizing thrust is also provided within the framework of the new method. Verification of the new approach is presented through a mathematical description and through numerical simulations. The mathematical description provides details of the sailcraft equations of motion, the numerical method used to solve the equations, and the formulation for implementing the equations of motion into the numerical solver. Previous work in the field is summarized to show that the new approach can act as a replacement to previous trajectory propagation methods. A code was developed to perform the simulations and it is also described in this document. Results of the simulations are compared to the flight data from the IKAROS mission. Comparison of the two sets of data show that the new approach is capable of accurately simulating sailcraft motion. Sailcraft and spacecraft simulations are compared to flight data and to other numerical solution techniques. The new formulation shows an increase in accuracy over a widely used trajectory propagation technique. Simulations for two-dimensional, three-dimensional, and variable attitude trajectories are presented to show the multiple capabilities of the new technique. An element of optimal control is also part of the new technique. An additional equation is added to the sailcraft equations of motion that maximizes thrust in a specific direction. A technical description and results of an example optimization problem are presented. The spacecraft attitude dynamics equations take the simulation a step further by providing control torques using the angular rate and acceleration outputs of the numerical formulation.

A Shear Deformable Shell Element for Laminated Composites

NASA Technical Reports Server (NTRS)

Chao, W. C.; Reddy, J. N.

1984-01-01

A three-dimensional element based on the total Lagrangian description of the motion of a layered anisotropic composite medium is developed, validated, and used to analyze layered composite shells. The element contains the following features: geometric nonlinearity, dynamic (transient) behavior, and arbitrary lamination scheme and lamina properties. Numerical results of nonlinear bending, natural vibration, and transient response are presented to illustrate the capabilities of the element.

75 FR 59195 - Federal Acquisition Regulation; Time-and-Materials (T&M) and Labor-Hour (LH) Contracts for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... suitable. At a minimum, the D&F shall-- (i) Include a description of the market research conducted (see 8... determination and findings is required to contain several elements, including a description of the market research performed for the acquisition and a description of the actions planned to maximize the use of...

User Manuals for a Primary Care Electronic Medical Record System: A Mixed Methods Study of User- and Vendor-Generated Documents.

PubMed

Shachak, Aviv; Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R; Lemieux-Charles, Louise

2013-06-04

Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design.

10 CFR 217.54 - Elements of an allocation order.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Elements of an allocation order. 217.54 Section 217.54 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS SYSTEM Allocation Actions § 217.54 Elements of an allocation order. Each allocation order must include: (a) A detailed description of the...

10 CFR 217.54 - Elements of an allocation order.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Elements of an allocation order. 217.54 Section 217.54 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS SYSTEM Allocation Actions § 217.54 Elements of an allocation order. Each allocation order must include: (a) A detailed description of the...

10 CFR 217.54 - Elements of an allocation order.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Elements of an allocation order. 217.54 Section 217.54 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS SYSTEM Allocation Actions § 217.54 Elements of an allocation order. Each allocation order must include: (a) A detailed description of the...

Absolutely Write! Teaching the Craft Elements of Writing. Bill Harp Professional Teachers Library.

ERIC Educational Resources Information Center

Thomason, Tommy; York, Carol

This book discusses basic craft elements of writing, illustrates from adult and children's literature what constitutes an engaging passage of description, and then illustrates how that craft can be taught in a workshop environment. In addition, this book includes involvement experiences that help teachers experience these craft elements. After an…

48 CFR 15.406-3 - Documenting the negotiation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... negotiation. 15.406-3 Section 15.406-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.406-3 Documenting the negotiation. (a) The contracting officer shall document in the contract file the principal elements of the...

48 CFR 15.406-3 - Documenting the negotiation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... negotiation. 15.406-3 Section 15.406-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.406-3 Documenting the negotiation. (a) The contracting officer shall document in the contract file the principal elements of the...

48 CFR 15.406-3 - Documenting the negotiation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... negotiation. 15.406-3 Section 15.406-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.406-3 Documenting the negotiation. (a) The contracting officer shall document in the contract file the principal elements of the...

48 CFR 15.406-3 - Documenting the negotiation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... negotiation. 15.406-3 Section 15.406-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.406-3 Documenting the negotiation. (a) The contracting officer shall document in the contract file the principal elements of the...

48 CFR 15.406-3 - Documenting the negotiation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... negotiation. 15.406-3 Section 15.406-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.406-3 Documenting the negotiation. (a) The contracting officer shall document in the contract file the principal elements of the...

Studying the Accuracy of Software Process Elicitation: The User Articulated Model

ERIC Educational Resources Information Center

Crabtree, Carlton A.

2010-01-01

Process models are often the basis for demonstrating improvement and compliance in software engineering organizations. A descriptive model is a type of process model describing the human activities in software development that actually occur. The purpose of a descriptive model is to provide a documented baseline for further process improvement…

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

Engineering, Scientific, and Related Occupations. Occupational Outlook Handbook Reprints. Bulletin 2450-3.

ERIC Educational Resources Information Center

Bureau of Labor Statistics, Washington, DC.

This document provides a description of engineering, scientific, and related occupations. Descriptions may include: (1) information on the nature of the work; (2) training required; (3) earnings; (4) job prospects, and (5) sources of additional information. Among the occupations described, the following job titles are included: Engineering,…

Florida Course Descriptions: Exceptional Student Education, Grades 9-12, 1999 Revisions. Suggested Course Performance Objectives.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Bureau of Instructional Support and Community Services.

This document presents the full revised course descriptions for Florida exceptional student education in grades 9-12. Courses incorporate the Florida standards for a special diploma. Requirements include a list of related benchmarks from the state standards for each level of functioning: independent, supported, and participatory. Introductory…

Truth, Love and Campus Expansion. The University of Pittsburgh Experience.

ERIC Educational Resources Information Center

Shaw, Paul C.

This document provides a descriptive analysis of the University of Pittsburgh's experience with campus expansion during a 2 1/2 year period from fall 1970 to spring 1973. Part one describes a background and overview of campus expansion, a description of selective Oakland demographic characteristics, a discussion of the first major conflict with…

World Perspective Case Descriptions on Educational Programs for Adults: Portugal.

ERIC Educational Resources Information Center

Soares de Melo, Alvaro; Cristovao, Artur F. A. C.

The case descriptions of two adult education programs in Portual contained in this document are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name,…

NUCLEAR REACTOR FUEL ELEMENT AND METHOD OF MANUFACTURE

DOEpatents

Brooks, H.

1960-04-26

A description is given for a fuel element comprising a body of uranium metal or an uranium compound dispersed in a matrix material made from magnesium, calcium, or barium and a stainless steel jacket enclosing the body.

Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Technical Reports Server (NTRS)

Schoenfeld, Michael

2009-01-01

A detailed description of the Nuclear Thermal Rocket Element Environmental Simulator (NTREES) is presented. The contents include: 1) Design Requirements; 2) NTREES Layout; 3) Data Acquisition and Control System Schematics; 4) NTREES System Schematic; and 5) NTREES Setup.

The finite element method in low speed aerodynamics

NASA Technical Reports Server (NTRS)

Baker, A. J.; Manhardt, P. D.

1975-01-01

The finite element procedure is shown to be of significant impact in design of the 'computational wind tunnel' for low speed aerodynamics. The uniformity of the mathematical differential equation description, for viscous and/or inviscid, multi-dimensional subsonic flows about practical aerodynamic system configurations, is utilized to establish the general form of the finite element algorithm. Numerical results for inviscid flow analysis, as well as viscous boundary layer, parabolic, and full Navier Stokes flow descriptions verify the capabilities and overall versatility of the fundamental algorithm for aerodynamics. The proven mathematical basis, coupled with the distinct user-orientation features of the computer program embodiment, indicate near-term evolution of a highly useful analytical design tool to support computational configuration studies in low speed aerodynamics.

ATM Technology Demonstration-1 Phase II Boeing Configurable Graphical Display (CGD) Software Design Description

NASA Technical Reports Server (NTRS)

Wilber, George F.

2017-01-01

This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).

EMSE at TREC 2015 Clinical Decision Support Track

DTIC Science & Technology

2015-11-20

pseudo relevant documents, semantic ressources of UMLS , and a hybrid approach called SMERA that combines LSI and UMLS based approaches. Only three of...approach to query expansion uses ontologies ( UMLS ) and a lo- cal approach based on pseudo relevant feedback documents using LSI. A brief description of...pseudo relevance feedback documents, and a semantic method based on UMLS concepts. The LSI-based method was used only to expand summary terms that can’t

A Combinatorial Geometry Computer Description of the XR311 Vehicle

DTIC Science & Technology

1978-04-01

cards or magnetic tape. The shot line output of the GRID subroutine of the GIFT code is also stored on magnetic tape for future vulnera- bility...descriptions as processed by the Geometric Information For Targets ( GIFT )2 computer code. This report documents the COM-GEOM target description for all...72, March 1974. ’L.W. Bains and M.J. Reisinger, "The GIFT Code User Manual, VOL 1, Introduction and Input Requirements, " Ballistic Research

Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides

DTIC Science & Technology

2009-01-01

STOCHASTIC LANCHESTER AIR-TO-AIR CAMPAIGN MODEL MODEL DESCRIPTION AND USERS GUIDES—2009 REPORT PA702T1 Rober t V. Hemm Jr. Dav id A . Lee...LMI © 2009. ALL RIGHTS RESERVED. Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides—2009 PA702T1/JANUARY...2009 Executive Summary This report documents the latest version of the Stochastic Lanchester Air-to-Air Campaign Model (SLAACM), developed by LMI for

Knowledge brokering for healthy aging: a scoping review of potential approaches.

PubMed

Van Eerd, Dwayne; Newman, Kristine; DeForge, Ryan; Urquhart, Robin; Cornelissen, Evelyn; Dainty, Katie N

2016-10-19

Developing a healthcare delivery system that is more responsive to the future challenges of an aging population is a priority in Canada. The World Health Organization acknowledges the need for knowledge translation frameworks in aging and health. Knowledge brokering (KB) is a specific knowledge translation approach that includes making connections between people to facilitate the use of evidence. Knowledge gaps exist about KB roles, approaches, and guiding frameworks. The objective of the scoping review is to identify and describe KB approaches and the underlying conceptual frameworks (models, theories) used to guide the approaches that could support healthy aging. Literature searches were done in PubMed, EMBASE, PsycINFO, EBM reviews (Cochrane Database of systematic reviews), CINAHL, and SCOPUS, as well as Google and Google Scholar using terms related to knowledge brokering. Titles, abstracts, and full reports were reviewed independently by two reviewers who came to consensus on all screening criteria. Documents were included if they described a KB approach and details about the underlying conceptual basis. Data about KB approach, target stakeholders, KB outcomes, and context were extracted independently by two reviewers. Searches identified 248 unique references. Screening for inclusion revealed 19 documents that described 15 accounts of knowledge brokering and details about conceptual guidance and could be applied in healthy aging contexts. Eight KB elements were detected in the approaches though not all approaches incorporated all elements. The underlying conceptual guidance for KB approaches varied. Specific KB frameworks were referenced or developed for nine KB approaches while the remaining six cited more general KT frameworks (or multiple frameworks) as guidance. The KB approaches that we found varied greatly depending on the context and stakeholders involved. Three of the approaches were explicitly employed in the context of health aging. Common elements of KB approaches that could be conducted in healthy aging contexts focussed on acquiring, adapting, and disseminating knowledge and networking (linkage). The descriptions of the guiding conceptual frameworks (theories, models) focussed on linkage and exchange but varied across approaches. Future research should gather KB practitioner and stakeholder perspectives on effective practices to develop KB approaches for healthy aging.

76 FR 33365 - Solicitation for a Cooperative Agreement: Document-Tools for Implementing Inmate Behavior...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

...: Document--Tools for Implementing Inmate Behavior Management; Setting Measurable Goals AGENCY: National... elements of inmate behavior management (IBM), as defined by NIC. This document will be written in the context of inmate behavior management, which is described under SUPPLEMENTARY INFORMATION below. This...

WHAEM: PROGRAM DOCUMENTATION FOR THE WELLHEAD ANALYTIC ELEMENT MODEL

EPA Science Inventory

The Wellhead Analytic Element Model (WhAEM) demonstrates a new technique for the definition of time-of-travel capture zones in relatively simple geohydrologic settings. he WhAEM package includes an analytic element model that uses superposition of (many) analytic solutions to gen...

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

Discharge documentation of patients discharged to subacute facilities: a three-year quality improvement process across an integrated health care system.

PubMed

Gandara, Esteban; Ungar, Jonathan; Lee, Jason; Chan-Macrae, Myrna; O'Malley, Terrence; Schnipper, Jeffrey L

2010-06-01

Effective communication among physicians during hospital discharge is critical to patient care. Partners Healthcare (Boston) has been engaged in a multi-year process to measure and improve the quality of documentation of all patients discharged from its five acute care hospitals to subacute facilities. Partners first engaged stakeholders to develop a consensus set of 12 required data elements for all discharges to subacute facilities. A measurement process was established and later refined. Quality improvement interventions were then initiated to address measured deficiencies and included education of physicians and nurses, improvements in information technology, creation of or improvements in discharge documentation templates, training of hospitalists to serve as role models, feedback to physicians and their service chiefs regarding reviewed cases, and case manager review of documentation before discharge. To measure improvement in quality as a result of these efforts, rates of simultaneous inclusion of all 12 applicable data elements ("defect-free rate") were analyzed over time. Some 3,101 discharge documentation packets of patients discharged to subacute facilities from January 1, 2006, through September 2008 were retrospectively studied. During the 11 monitored quarters, the defect-free rate increased from 65% to 96% (p < .001 for trend). The largest improvements were seen in documentation of preadmission medication lists, allergies, follow-up, and warfarin information. Institution of rigorous measurement, feedback, and multidisciplinary, multimodal quality improvement processes improved the inclusion of data elements in discharge documentation required for safe hospital discharge across a large integrated health care system.

DNA transposons have colonized the genome of the giant virus Pandoravirus salinus.

PubMed

Sun, Cheng; Feschotte, Cédric; Wu, Zhiqiang; Mueller, Rachel Lockridge

2015-06-12

Transposable elements are mobile DNA sequences that are widely distributed in prokaryotic and eukaryotic genomes, where they represent a major force in genome evolution. However, transposable elements have rarely been documented in viruses, and their contribution to viral genome evolution remains largely unexplored. Pandoraviruses are recently described DNA viruses with genome sizes that exceed those of some prokaryotes, rivaling parasitic eukaryotes. These large genomes appear to include substantial noncoding intergenic spaces, which provide potential locations for transposable element insertions. However, no mobile genetic elements have yet been reported in pandoravirus genomes. Here, we report a family of miniature inverted-repeat transposable elements (MITEs) in the Pandoravirus salinus genome, representing the first description of a virus populated with a canonical transposable element family that proliferated by transposition within the viral genome. The MITE family, which we name Submariner, includes 30 copies with all the hallmarks of MITEs: short length, terminal inverted repeats, TA target site duplication, and no coding capacity. Submariner elements show signs of transposition and are undetectable in the genome of Pandoravirus dulcis, the closest known relative Pandoravirus salinus. We identified a DNA transposon related to Submariner in the genome of Acanthamoeba castellanii, a species thought to host pandoraviruses, which contains remnants of coding sequence for a Tc1/mariner transposase. These observations suggest that the Submariner MITEs of P. salinus belong to the widespread Tc1/mariner superfamily and may have been mobilized by an amoebozoan host. Ten of the 30 MITEs in the P. salinus genome are located within coding regions of predicted genes, while others are close to genes, suggesting that these transposons may have contributed to viral genetic novelty. Our discovery highlights the remarkable ability of DNA transposons to colonize and shape genomes from all domains of life, as well as giant viruses. Our findings continue to blur the division between viral and cellular genomes, adhering to the emerging view that the content, dynamics, and evolution of the genomes of giant viruses do not substantially differ from those of cellular organisms.

An Analysis of the Horticulture Equipment and Services Occupation.

ERIC Educational Resources Information Center

Harbage, Monroe; Lechner, Donald L.

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the horticulture equipment and services occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fourteen duties are…

Space Documentation Services: Operations Handbook.

ERIC Educational Resources Information Center

Raitt, D. I.

A description of the system used by Space Documentation Service (SDS) to disseminate combined and accumulated knowledge, as widely as possible, throughout Europe is given. The RECON network, with the full support of NASA, has gradually been extended so that centers in Member States, may, by installing their own terminals, have direct access to the…

Advanced Marketing/Coop Course Outline.

ERIC Educational Resources Information Center

Dixon, Bobby

This document contains the information required to present a 1-year school course that is the capstone class of a 2-year marketing major and is designed for high school students wishing to develop the skills required for entry into the marketing industry. The document begins with a rationale, brief course description, list of course objectives,…

Consulting for Black Enterprise...A Challenge to the Business Establishment.

ERIC Educational Resources Information Center

Strang, William A.; And Others

This document presents a description of the Minority Business Consulting Program, a graduate course at the University of Wisconsin Graduate School of Business. The report is presented for various audiences. It is presented as a working document for college instructors and administrators as a possible vehicle for a program in enterprise formation…

An Analysis of the Commercial Art Occupation.

ERIC Educational Resources Information Center

Mowen, Kenneth A.; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the commercial artist occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Seventeen duties are broken down into a…

State Requirements for High School Graduation: Communication Skills. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of documents setting forth the minimum communications skills competencies required for high school graduation in seven states: Florida, Louisiana, Maryland, Massachusetts, New Mexico, and Utah. It then describes the procedures used to compile a synthesized list from those documents for use in a project to assess…

Legal Typewriting, Business Education: 7705.35.

ERIC Educational Resources Information Center

Missirlian, Melanie

The course is designed to help the student qualify for employment as a typist in a legal office. Instruction is given to enable the student to prepare all types of legal documents, spell and use legal terminology correctly, and transfer legal information from one document to another. The course description includes: (1) equipment and supplies, (2)…

An Analysis of the Machine Trades Occupation.

ERIC Educational Resources Information Center

Hall, Charles W.; Emory, Harold L.

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the machine trades occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fifteen duties are broken down into a number…

Project: Ways to Improve Education in Desegregated Schools (WIEDS). [Appendices for Final Report.

ERIC Educational Resources Information Center

Roberson, Don R.; And Others

This document consists of a literature review and the description of a field study undertaken as part of a pilot research project focusing on improving education in desegregated public schools. The review documents the organization and successful programmatic strategies of school integration. Findings are presented in terms of administrative and…

A Survey of Selected Document Processing Systems.

ERIC Educational Resources Information Center

Fong, Elizabeth

In addition to reviewing the characteristics of document processing systems, this paper pays considerable attention to the description of a system via a feature list approach. The purpose of this report is to present features of the systems in parallel fashion to facilitate comparison so that a potential user may have a basis for evaluation in…

Project IMPACT Software Documentation: Overview of the Computer-Administered Instruction Subsystem.

ERIC Educational Resources Information Center

Stelzer, John; Garneau, Jean

Research in Project IMPACT, prototypes of computerized training for Army personnel, is documented in an overview of the IMPACT computer software system for computer-administered instruction, exclusive of instructional software. The overview description provides a basis for an understanding of the rationale and motivation for the development of the…

An Analysis of the Laboratory Assisting Occupation.

ERIC Educational Resources Information Center

McGee, Patricia; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the laboratory assistant occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down into a…

Implementing Curriculum-Based Learning Portfolio: A Case Study in Taiwan

ERIC Educational Resources Information Center

Chen, Shu-Chin Susan; Cheng, Yu-Pay

2011-01-01

The main purpose of this descriptive research is to examine and document the development of a curriculum-based learning portfolio model for children in a preschool for three-six-year-olds in Taiwan. Data collection methods adopted include classroom observation, in-depth interviews, questionnaires and documentation. Participants include a preschool…

A Plan for: A Consumer Conference for Older Adults.

ERIC Educational Resources Information Center

Zarakov, Selma

This document provides a step-by-step description of the planning and implementation of a two day consumer concerns conference for older adults held at Palomar Community College (California). The bulk of the document is made up of practical discussions of such planning phases as facility selection and decoration, conference publicity, snack and…

An Analysis of the Insurance Sales Occupation.

ERIC Educational Resources Information Center

Moore, Gordon; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the insurance sales occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down into a number…

Global Document Delivery, User Studies, and Service Evaluation: The Gateway Experience

ERIC Educational Resources Information Center

Miller, Rush; Xu, Hong; Zou, Xiuying

2008-01-01

This study examines user and service data from 2002-2006 at the East Asian Gateway Service for Chinese and Korean Academic Journal Publications (Gateway Service), the University of Pittsburgh. Descriptive statistical analysis reveals that the Gateway Service has been consistently playing the leading role in global document delivery service as well…

An Analysis of the Purchasing Occupation.

ERIC Educational Resources Information Center

Lustic, Gary; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the purchasing occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fourteen duties are broken down into a number of…

An Analysis of the Lithographic Printing Occupation.

ERIC Educational Resources Information Center

Innis, Gene A.; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the lithographic printing occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Nine duties are broken down into a…

An Analysis of the Information Receptionist Occupation.

ERIC Educational Resources Information Center

Sams, Helen C.; Snyder, Lois M.

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the information receptionist occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Ten duties are broken down into a…

An Analysis of the Industrial Sales Occupation.

ERIC Educational Resources Information Center

Kitzmiller, Charles C.; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the industrial sales occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eight duties are broken down into a number…

Collection Development Organization and Committees. SPEC Kit 11.

ERIC Educational Resources Information Center

Association of Research Libraries, Washington, DC. Office of Management Studies.

This kit focuses on information that is useful for starting a collection development program. It contains 7 position descriptions, 10 documents on the role of committees, 4 organization charts, 5 documents on the organization of functions, and an analysis of a Systems and Procedures Exchange Center (SPEC) collection development survey. The survey,…

Impact of Environmental Pollution on the Preservation of Archives and Records: A RAMP Study.

ERIC Educational Resources Information Center

Pascoe, M. W.

Following a description of the essential chemical and physical structures of most archive documents, this paper examines the various pollutants that can damage these documents and gives their characteristics. The pollutants are categorized as environmental (e.g., smokes, mineral dusts); exterior gas and vapor (e.g., oxygen, water, sulphur…

Combination of Virtual Tours, 3d Model and Digital Data in a 3d Archaeological Knowledge and Information System

NASA Astrophysics Data System (ADS)

Koehl, M.; Brigand, N.

2012-08-01

The site of the Engelbourg ruined castle in Thann, Alsace, France, has been for some years the object of all the attention of the city, which is the owner, and also of partners like historians and archaeologists who are in charge of its study. The valuation of the site is one of the main objective, as well as its conservation and its knowledge. The aim of this project is to use the environment of the virtual tour viewer as new base for an Archaeological Knowledge and Information System (AKIS). With available development tools we add functionalities in particular through diverse scripts that convert the viewer into a real 3D interface. By beginning with a first virtual tour that contains about fifteen panoramic images, the site of about 150 times 150 meters can be completely documented by offering the user a real interactivity and that makes visualization very concrete, almost lively. After the choice of pertinent points of view, panoramic images were realized. For the documentation, other sets of images were acquired at various seasons and climate conditions, which allow documenting the site in different environments and states of vegetation. The final virtual tour was deducted from them. The initial 3D model of the castle, which is virtual too, was also joined in the form of panoramic images for completing the understanding of the site. A variety of types of hotspots were used to connect the whole digital documentation to the site, including videos (as reports during the acquisition phases, during the restoration works, during the excavations, etc.), digital georeferenced documents (archaeological reports on the various constituent elements of the castle, interpretation of the excavations and the searches, description of the sets of collected objects, etc.). The completely personalized interface of the system allows either to switch from a panoramic image to another one, which is the classic case of the virtual tours, or to go from a panoramic photographic image to a panoramic virtual image. It also allows visualizing, in inlay, digital data, like ancient or recent plans, cross sections, descriptions, explanatory videos, sound comments, etc. This project has lead to very convincing results, that were validated by the historians and the archaeologists who have now an interactive tool, disseminated through internet, allowing at the same time to visit virtually the castle, but also to query the system which sends back localized information. The various levels of understanding and set up details, allow an approach of first level for broad Internet users, but also a deeper approach for a group of scientists who are associated to the development of the ruins of the castle and its environment.

Predicate Argument Structure Analysis for Use Case Description Modeling

NASA Astrophysics Data System (ADS)

Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.

Documentation and dissemination of the sculptural elements of Canada's Parliamentary Buildings: Methodology development and evolution, a case study

NASA Astrophysics Data System (ADS)

Ouimet, C.; Gregg, J.; Kretz, S.; Chandler, C.; Hayes, J.

2015-08-01

Parliament Hill consists of four historic gothic revival buildings, which form part of the Parliament Buildings National Historic Site of Canada in the National Capital of Ottawa. There are more than 2000 masonry sculptural elements throughout the four buildings. Three of the buildings are in the middle of multi-year rehabilitation projects. Extensive Heritage Documentation is being undertaken to support various activities and conservation teams throughout the interior and exterior of the buildings while also serving as a key posterity records. One of the significant heritage documentation projects is the 3D digitization of the 2000+ heritage character defining sculptural elements. The Heritage Conservation Directorate (HCD) of Public Works and Government Services Canada (PWGSC) was tasked by the Parliamentary Precinct Branch (PPB) of PWGSC to document these character defining elements. The sculptures vary in size from as small as 100mm in width to up to 2 meters in size. This project is in its third year and much has been learned and researched about the most appropriate and efficient means by which to document these elements. Although a methodology was in place to document the sculptures at the inception of the project, it has gone through several iterations in order to improve the gathered data, and in turn increase the efficiency, quality and speed of data acquisition. This paper will describe the evolution of the methodology, as well as the rationale for the alterations in technique. With over 600 of the approximate 2000 (heritage character defining) sculptural elements captured to date, the project is entering a critical phase where an efficient and effective method for sharing and disseminating the information to a wide audience is being explored and evaluated. The end result is intended to allow the client (PPB) and the general public a way to look at and interactively manipulate the viewpoint of each digital model. This will provide a unique opportunity for a wide audience to evaluate and appreciate these elaborate works of art. This database of information can also be of use for academic study and research. To date the data captured by HCD has been utilized by conservation professionals and by the Carleton Immersive Media Studio (CIMS) of Carleton University. HCD has partnered with CIMS to explore a wide variety of potential uses for the data including the creation of 2D-drawings, stone carving profile templates, 3D printed scale models, CNC carved maquettes, robotic stone carving, and digitally-designed replacement elements. CIMS and HCD have tested the limits of digital technologies to assist stone carvers in restoring carved elements while also learning from the sculptors and masons to better understand their approach when conserving or restoring a sculptural element. Examples of how the conservation team, specifically the stone carvers have been working with the data and technology will also be presented.

Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

PubMed

Furlan, Giovanni

2012-08-01

Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically required by other documents. The author has identified signal detection (intended not only as adverse event disproportionate reporting, but including non-clinical, laboratory, clinical analysis data and literature screening) and characterization as the basis for the preparation of all drug safety documents, which can be viewed as different ways of presenting the results of this activity. Therefore, the author proposes to merge all the aggregate reports required by current regulations into a single document - the Drug Safety Master File. This report should contain all the available information, from any source, regarding the potential and identified risks of a drug. It should be a living document updated and submitted to regulatory authorities on an ongoing basis.

Design of the SGML-based electronic patient record system with the use of object-oriented analysis methods.

PubMed

Kuikka, E; Eerola, A; Porrasmaa, J; Miettinen, A; Komulainen, J

1999-01-01

Since a patient record is typically a document updated by many users, required to be represented in many different layouts, and transferred from place to place, it is a good candidate to be represented structured and coded using the SGML document standard. The use of the SGML requires that the structure of the document is defined in advance by a Document Type Definition (DTD) and the document follows it. This paper represents a method which derives an SGML DTD by starting from the description of the usage of the patient record in medical care and nursing.

The TMIS life-cycle process document, revision A

NASA Technical Reports Server (NTRS)

1991-01-01

The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.

Automatic document classification of biological literature

PubMed Central

Chen, David; Müller, Hans-Michael; Sternberg, Paul W

2006-01-01

Background Document classification is a wide-spread problem with many applications, from organizing search engine snippets to spam filtering. We previously described Textpresso, a text-mining system for biological literature, which marks up full text according to a shallow ontology that includes terms of biological interest. This project investigates document classification in the context of biological literature, making use of the Textpresso markup of a corpus of Caenorhabditis elegans literature. Results We present a two-step text categorization algorithm to classify a corpus of C. elegans papers. Our classification method first uses a support vector machine-trained classifier, followed by a novel, phrase-based clustering algorithm. This clustering step autonomously creates cluster labels that are descriptive and understandable by humans. This clustering engine performed better on a standard test-set (Reuters 21578) compared to previously published results (F-value of 0.55 vs. 0.49), while producing cluster descriptions that appear more useful. A web interface allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. Conclusion We have demonstrated a simple method to classify biological documents that embodies an improvement over current methods. While the classification results are currently optimized for Caenorhabditis elegans papers by human-created rules, the classification engine can be adapted to different types of documents. We have demonstrated this by presenting a web interface that allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. PMID:16893465

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1989-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1987-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Supportive Training for Inexperienced and New Teachers (STINT). Part I.

ERIC Educational Resources Information Center

Fox, David J.; And Others

This document is an evaluative description of the program conducted by the New York City Board of Education during the 1968-69 school year. Opening chapters describe the two-phase evaluation design (descriptive and qualitative) and outline the program in which an initial group of 152 master teachers plus 100 more added in Febraury were assigned as…

An Assessment System for Competence Based Education: The Educational Development, Dissemination, and Evaluation Training Program.

ERIC Educational Resources Information Center

Hood, Paul D.; Blackwell, Laird

This manual provides a description of the development and a guide to the use of the assessment resources developed in connection with the Far West Development, Dissemination, and Evaluation (DD&E) Functional Competence Training Program. The document concentrates on a user-oriented description of the content, validation, and use of the final…

Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

NASA Technical Reports Server (NTRS)

Lennington, R. K.; Rassbach, M. E.

1979-01-01

Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

Machine-Aided Indexing in Practice: An Encounter with Automatic Indexing of the Third Kind.

ERIC Educational Resources Information Center

Klingbiel, Paul H.

This three-part report includes a brief history of the Defense Documentation Center (DDC) with a description of the collections and their accessibility; categorization of automatic indexing into three kinds with a brief description of the DDC system of machine-aided indexing; and an indication of some operational experiences with the system.…

The Relationship between BIBFRAME and OCLC's Linked-Data Model of Bibliographic Description: A Working Paper

ERIC Educational Resources Information Center

Godby, Carol Jean

2013-01-01

This document describes a proposed alignment between BIBFRAME (Bibliographic Framework) and a model being explored by the Online Computer Library Center (OCLC) with extensions proposed by the Schema Bib Extend project, a Worldwide Web Consortium sponsored (W3C-sponsored) community group tasked with enhancing Schema.org to the description of…

World Perspective Case Descriptions on Educational Programs for Adults: Chile.

ERIC Educational Resources Information Center

Donoso, Patricio; Gajardo, Marcela

This document contains two case studies of adult education programs in Chile. Both case studies begin with a "face sheet" on which is recorded basic information about the program and the description. The first case study, prepared by Patricio Donoso, reports on Centro El Canelo de Nos, an inservice center for educators who work with…

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Helicopter Maritime Environment Trainer: Operational Software CSCI Version Description Document (Simulateur D’Entrainement Virtuel pour Helicoptere Maritime: Logiciel Operationnel CSCI, Document de Description de la Version)

DTIC Science & Technology

2011-06-01

d’envol d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces...d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces canadiennes...afin d’entraîner les pilotes d’hélicoptère à l’atterrissage sur le pont d’envol d’une frégate canadienne de patrouille dans un environnement virtuel

Launch Deployment Assembly Extravehicular Activity Neutral Buoyancy Development Test Report

NASA Technical Reports Server (NTRS)

Loughead, T.

1996-01-01

This test evaluated the Launch Deployment Assembly (LDA) design for Extravehicular Activity (EVA) work sites (setup, igress, egress), reach and visual access, and translation required for cargo item removal. As part of the LDA design, this document describes the method and results of the LDA EVA Neutral Buoyancy Development Test to ensure that the LDA hardware support the deployment of the cargo items from the pallet. This document includes the test objectives, flight and mockup hardware description, descriptions of procedures and data collection used in the testing, and the results of the development test at the National Aeronautics and Space Administrations (NASA) Marshall Space Flight Center (MSFC) Neutral Buoyancy Simulator (NBS).

Title list of documents made publicly available. Volume 17, No. 10

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.

Title list of documents made publicly available, September 1--30, 1994. Volume 16, No. 9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-11-01

This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.

Main image file tape description

USGS Publications Warehouse

Warriner, Howard W.

1980-01-01

This Main Image File Tape document defines the data content and file structure of the Main Image File Tape (MIFT) produced by the EROS Data Center (EDC). This document also defines an INQUIRY tape, which is just a subset of the MIFT. The format of the INQUIRY tape is identical to the MIFT except for two records; therefore, with the exception of these two records (described elsewhere in this document), every remark made about the MIFT is true for the INQUIRY tape.

Title list of documents made publicly available, November 1--30, 1994. Volume 16, No. 11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1995-01-01

This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.

DTD Creation for the Software Technology for Adaptable, Reliable Systems (STARS) Program

DTIC Science & Technology

1990-06-23

developed to store documents in a format peculiar to the program’s design . Editing the document became easy since word processors adjust all spacing and...descriptive markup may be output to a 3 CDRL 1810 January 26, 1990 variety of devices ranging from high quality typography printers through laser printers...provision for non-SGML material, such as graphics , to be inserted in a document. For these reasons the Computer-Aided Acquisition and Logistics Support

GB3.0: a platform for plant bio-design that connects functional DNA elements with associated biological data

PubMed Central

Vazquez-Vilar, Marta; Quijano-Rubio, Alfredo; Fernandez-del-Carmen, Asun; Sarrion-Perdigones, Alejandro; Ochoa-Fernandez, Rocio; Ziarsolo, Peio

2017-01-01

Abstract Modular DNA assembly simplifies multigene engineering in Plant Synthetic Biology. Furthermore, the recent adoption of a common syntax to facilitate the exchange of plant DNA parts (phytobricks) is a promising strategy to speed up genetic engineering. Following this lead, here, we present a platform for plant biodesign that incorporates functional descriptions of phytobricks obtained under pre-defined experimental conditions, and systematically registers the resulting information as metadata for documentation. To facilitate the handling of functional descriptions, we developed a new version (v3.0) of the GoldenBraid (GB) webtool that integrates the experimental data and displays it in the form of datasheets. We report the use of the Luciferase/Renilla (Luc/Ren) transient agroinfiltration assay in Nicotiana benthamiana as a standard to estimate relative transcriptional activities conferred by regulatory phytobricks, and show the consistency and reproducibility of this method in the characterization of a synthetic phytobrick based on the CaMV35S promoter. Furthermore, we illustrate the potential for combinatorial optimization and incremental innovation of the GB3.0 platform in two separate examples, (i) the development of a collection of orthogonal transcriptional regulators based on phiC31 integrase and (ii) the design of a small genetic circuit that connects a glucocorticoid switch to a MYB/bHLH transcriptional activation module. PMID:28053117

Disparities in correlating microstructural to nanostructural preservation of dinosaur femoral bones

NASA Astrophysics Data System (ADS)

Kim, Jung-Kyun; Kwon, Yong-Eun; Lee, Sang-Gil; Lee, Ji-Hyun; Kim, Jin-Gyu; Huh, Min; Lee, Eunji; Kim, Youn-Joong

2017-03-01

Osteohistological researches on dinosaurs are well documented, but descriptions of direct correlations between the bone microstructure and corresponding nanostructure are currently lacking. By applying correlative microscopy, we aimed to verify that well-preserved osteohistological features correlate with pristine fossil bone nanostructures from the femoral bones of Koreanosaurus boseongensis. The quality of nanostructural preservation was evaluated based on the preferred orientation level of apatite crystals obtained from selected area electron diffraction (SAED) patterns and by measuring the “arcs” from the {100} and {002} diffraction rings. Unlike our expectations, our results revealed that well-preserved microstructures do not guarantee pristine nanostructures and vice versa. Structural preservation of bone from macro- to nanoscale primarily depends on original bioapatite density, and subsequent taphonomical factors such as effects from burial, pressure, influx of external elements and the rate of diagenetic alteration of apatite crystals. Our findings suggest that the efficient application of SAED analysis opens the opportunity for comprehensive nanostructural investigations of bone.

SAFSIM theory manual: A computer program for the engineering simulation of flow systems

NASA Astrophysics Data System (ADS)

Dobranich, Dean

1993-12-01

SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program for simulating the integrated performance of complex flow systems. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a fluid mechanics module with flow network capability; (2) a structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. Any or all of the physics modules can be implemented, as the problem dictates. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems. Both the fluid mechanics and structure heat transfer modules employ a one-dimensional finite element modeling approach. This document contains a description of the theory incorporated in SAFSIM, including the governing equations, the numerical methods, and the overall system solution strategies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R D) program history (focusing on DOE's funded efforts) is discussed. The status of the technologymore » elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory's unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.« less

Test and control computer user's guide for a digital beam former test system

NASA Technical Reports Server (NTRS)

Alexovich, Robert E.; Mallasch, Paul G.

1992-01-01

A Digital Beam Former Test System was developed to determine the effects of noise, interferers and distortions, and digital implementations of beam forming as applied to the Tracking and Data Relay Satellite 2 (TDRS 2) architectures. The investigation of digital beam forming with application to TDRS 2 architectures, as described in TDRS 2 advanced concept design studies, was conducted by the NASA/Lewis Research Center for NASA/Goddard Space Flight Center. A Test and Control Computer (TCC) was used as the main controlling element of the digital Beam Former Test System. The Test and Control Computer User's Guide for a Digital Beam Former Test System provides an organized description of the Digital Beam Former Test System commands. It is written for users who wish to conduct tests of the Digital Beam forming Test processor using the TCC. The document describes the function, use, and syntax of the TCC commands available to the user while summarizing and demonstrating the use of the commands wtihin DOS batch files.

Alignment of ICNP® 2.0 ontology and a proposed INCP® Brazilian ontology.

PubMed

Carvalho, Carina Maris Gaspar; Cubas, Marcia Regina; Malucelli, Andreia; Nóbrega, Maria Miriam Lima da

2014-01-01

to align the International Classification for Nursing Practice (ICNP®) Version 2.0 ontology and a proposed INCP® Brazilian Ontology. document-based, exploratory and descriptive study, the empirical basis of which was provided by the ICNP® 2.0 Ontology and the INCP® Brazilian Ontology. The ontology alignment was performed using a computer tool with algorithms to identify correspondences between concepts, which were organized and analyzed according to their presence or absence, their names, and their sibling, parent, and child classes. there were 2,682 concepts present in the ICNP® 2.0 Ontology that were missing in the Brazilian Ontology; 717 concepts present in the Brazilian Ontology were missing in the ICNP® 2.0 Ontology; and there were 215 pairs of matching concepts. it is believed that the correspondences identified in this study might contribute to the interoperability between the representations of nursing practice elements in ICNP®, thus allowing the standardization of nursing records based on this classification system.

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

NASA Technical Reports Server (NTRS)

2005-01-01

The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

Concept document of the repository-based software engineering program: A constructive appraisal

NASA Technical Reports Server (NTRS)

1992-01-01

A constructive appraisal of the Concept Document of the Repository-Based Software Engineering Program is provided. The Concept Document is designed to provide an overview of the Repository-Based Software Engineering (RBSE) Program. The Document should be brief and provide the context for reading subsequent requirements and product specifications. That is, all requirements to be developed should be traceable to the Concept Document. Applied Expertise's analysis of the Document was directed toward assuring that: (1) the Executive Summary provides a clear, concise, and comprehensive overview of the Concept (rewrite as necessary); (2) the sections of the Document make best use of the NASA 'Data Item Description' for concept documents; (3) the information contained in the Document provides a foundation for subsequent requirements; and (4) the document adequately: identifies the problem being addressed; articulates RBSE's specific role; specifies the unique aspects of the program; and identifies the nature and extent of the program's users.

Contemporary Issues in Science. Implementation Manual.

ERIC Educational Resources Information Center

Staten Island Continuum of Education, NY.

Contemporary Issues in Science Program (CIIS) is designed to provide teachers and students with the necessary tools and strategies for bringing contemporary scientific issues into the classroom. Provided in this document are discussions of the three major elements in the program, support elements, and major activities. Major elements include the…